diff options
| author | Amit Virdi <amit.virdi@st.com> | 2012-05-07 13:00:20 +0530 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-07-07 14:07:38 +0200 |
| commit | 5c16c54124ba7a21979e1eb656e696b7b6d881ec (patch) | |
| tree | 480799414f62c779620bb0583e69cc52073d6957 /drivers/mtd/st_smi.c | |
| parent | f3fcf92d595b297b47a1b58b8ec39f93f40ef912 (diff) | |
| download | blackbird-obmc-uboot-5c16c54124ba7a21979e1eb656e696b7b6d881ec.tar.gz blackbird-obmc-uboot-5c16c54124ba7a21979e1eb656e696b7b6d881ec.zip | |
st_smi: Return error in case TFF is not set
Curently the code makes wrong assumption that the Transfer finished flag shall
be set within the stipulated time. However, there may occur a scenario in which
the TFF flag is not set. Return error in that case.
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers/mtd/st_smi.c')
| -rw-r--r-- | drivers/mtd/st_smi.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c index db08ab97e4..9769b284e7 100644 --- a/drivers/mtd/st_smi.c +++ b/drivers/mtd/st_smi.c @@ -58,13 +58,15 @@ static struct flash_dev flash_ids[] = { * * Wait until TFF is set in status register */ -static void smi_wait_xfer_finish(int timeout) +static int smi_wait_xfer_finish(int timeout) { - while (timeout--) { + do { if (readl(&smicntl->smi_sr) & TFF) - break; + return 0; udelay(1000); - } + } while (timeout--); + + return -1; } /* @@ -83,7 +85,8 @@ static unsigned int smi_read_id(flash_info_t *info, int banknum) writel((banknum << BANKSEL_SHIFT) | SEND | TX_LEN_1 | RX_LEN_3, &smicntl->smi_cr2); - smi_wait_xfer_finish(XFER_FINISH_TOUT); + if (smi_wait_xfer_finish(XFER_FINISH_TOUT)) + return -EIO; value = (readl(&smicntl->smi_rr) & 0x00FFFFFF); @@ -151,7 +154,8 @@ static unsigned int smi_read_sr(int bank) /* Performing a RSR instruction in HW mode */ writel((bank << BANKSEL_SHIFT) | RD_STATUS_REG, &smicntl->smi_cr2); - smi_wait_xfer_finish(XFER_FINISH_TOUT); + if (smi_wait_xfer_finish(XFER_FINISH_TOUT)) + return -1; /* Restore the CTRL REG1 state */ writel(ctrlreg1, &smicntl->smi_cr1); @@ -211,7 +215,8 @@ static int smi_write_enable(int bank) /* Give the Flash, Write Enable command */ writel((bank << BANKSEL_SHIFT) | WE, &smicntl->smi_cr2); - smi_wait_xfer_finish(XFER_FINISH_TOUT); + if (smi_wait_xfer_finish(XFER_FINISH_TOUT)) + return -1; /* Restore the CTRL REG1 state */ writel(ctrlreg1, &smicntl->smi_cr1); @@ -292,7 +297,8 @@ static int smi_sector_erase(flash_info_t *info, unsigned int sector) writel(instruction, &smicntl->smi_tr); writel((bank << BANKSEL_SHIFT) | SEND | TX_LEN_4, &smicntl->smi_cr2); - smi_wait_xfer_finish(XFER_FINISH_TOUT); + if (smi_wait_xfer_finish(XFER_FINISH_TOUT)) + return -EIO; if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT)) return -EBUSY; |
