Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 119 deletions

diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
deleted file mode 100644
index f2e750f2f1..0000000000
--- a/common/cmd_dtt.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-
-#include <dtt.h>
-#include <i2c.h>
-#include <tmu.h>
-
-#if defined CONFIG_DTT_SENSORS
-static unsigned long sensor_initialized;
-
-static void _initialize_dtt(void)
-{
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-
-	for (i = 0; i < sizeof(sensors); i++) {
-		if ((sensor_initialized & (1 << i)) == 0) {
-			if (dtt_init_one(sensors[i]) != 0) {
-				printf("DTT%d: Failed init!\n", i);
-				continue;
-			}
-			sensor_initialized |= (1 << i);
-		}
-	}
-}
-
-void dtt_init(void)
-{
-	int old_bus;
-
-	/* switch to correct I2C bus */
-	old_bus = I2C_GET_BUS();
-	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
-
-	_initialize_dtt();
-
-	/* switch back to original I2C bus */
-	I2C_SET_BUS(old_bus);
-}
-#endif
-
-int dtt_i2c(void)
-{
-#if defined CONFIG_DTT_SENSORS
-	int i;
-	unsigned char sensors[] = CONFIG_DTT_SENSORS;
-	int old_bus;
-
-	/* Force a compilation error, if there are more then 32 sensors */
-	BUILD_BUG_ON(sizeof(sensors) > 32);
-	/* switch to correct I2C bus */
-#ifdef CONFIG_SYS_I2C
-	old_bus = i2c_get_bus_num();
-	i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
-#else
-	old_bus = I2C_GET_BUS();
-	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
-#endif
-
-	_initialize_dtt();
-
-	/*
-	 * Loop through sensors, read
-	 * temperature, and output it.
-	 */
-	for (i = 0; i < sizeof(sensors); i++)
-		printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
-
-	/* switch back to original I2C bus */
-#ifdef CONFIG_SYS_I2C
-	i2c_set_bus_num(old_bus);
-#else
-	I2C_SET_BUS(old_bus);
-#endif
-#endif
-
-	return 0;
-}
-
-int dtt_tmu(void)
-{
-#if defined CONFIG_TMU_CMD_DTT
-	int cur_temp;
-
-	/* Sense and return latest thermal info */
-	if (tmu_monitor(&cur_temp) == TMU_STATUS_INIT) {
-		puts("TMU is in unknown state, temperature is invalid\n");
-		return -1;
-	}
-	printf("Current temperature: %u degrees Celsius\n", cur_temp);
-#endif
-	return 0;
-}
-
-int do_dtt(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
-{
-	int err = 0;
-
-	err |= dtt_i2c();
-	err |= dtt_tmu();
-
-	return err;
-}	/* do_dtt() */
-
-/***************************************************/
-
-U_BOOT_CMD(
-	  dtt,	1,	1,	do_dtt,
-	  "Read temperature from Digital Thermometer and Thermostat",
-	  ""
-);