arm: Remove eukrea boards

These boards have not been converted to generic board by the deadline.
Remove all cpu9260 and cpuat91 boards.

Signed-off-by: Simon Glass <sjg@chromium.org>

9 files changed, 0 insertions, 441 deletions

diff --git a/board/eukrea/cpu9260/Kconfig b/board/eukrea/cpu9260/Kconfig
deleted file mode 100644
index 90d2124557..0000000000
--- a/board/eukrea/cpu9260/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CPU9260
-
-config SYS_BOARD
-	default "cpu9260"
-
-config SYS_VENDOR
-	default "eukrea"
-
-config SYS_CONFIG_NAME
-	default "cpu9260"
-
-endif
diff --git a/board/eukrea/cpu9260/MAINTAINERS b/board/eukrea/cpu9260/MAINTAINERS
deleted file mode 100644
index fb5aee80d5..0000000000
--- a/board/eukrea/cpu9260/MAINTAINERS
+++ /dev/null
@@ -1,13 +0,0 @@
-CPU9260 BOARD
-M:	Eric Benard <eric@eukrea.com>
-S:	Maintained
-F:	board/eukrea/cpu9260/
-F:	include/configs/cpu9260.h
-F:	configs/cpu9260_defconfig
-F:	configs/cpu9260_128M_defconfig
-F:	configs/cpu9260_nand_defconfig
-F:	configs/cpu9260_nand_128M_defconfig
-F:	configs/cpu9G20_defconfig
-F:	configs/cpu9G20_128M_defconfig
-F:	configs/cpu9G20_nand_defconfig
-F:	configs/cpu9G20_nand_128M_defconfig
diff --git a/board/eukrea/cpu9260/Makefile b/board/eukrea/cpu9260/Makefile
deleted file mode 100644
index e34792ac42..0000000000
--- a/board/eukrea/cpu9260/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net
-# Lead Tech Design <www.leadtechdesign.com>
-# Ilko Iliev <www.ronetix.at>
-#
-# (C) Copyright 2009
-# Eric Benard <eric@eukrea.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += cpu9260.o
-obj-y += led.o
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
deleted file mode 100644
index 01ecccb8c9..0000000000
--- a/board/eukrea/cpu9260/cpu9260.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- * Ilko Iliev <www.ronetix.at>
- *
- * (C) Copyright 2009-2011
- * Eric Benard <eric@eukrea.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/hardware.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void cpu9260_nand_hw_init(void)
-{
-	unsigned long csa;
-	at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC;
-	at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	/* Enable CS3 */
-	csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
-	writel(csa, &matrix->csa);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-#if defined(CONFIG_CPU9G20)
-	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
-		AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
-		&smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-		AT91_SMC_MODE_DBW_8 |
-		AT91_SMC_MODE_TDF_CYCLE(3),
-		&smc->cs[3].mode);
-#elif defined(CONFIG_CPU9260)
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-		&smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-		AT91_SMC_MODE_DBW_8 |
-		AT91_SMC_MODE_TDF_CYCLE(2),
-		&smc->cs[3].mode);
-#endif
-
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
-	/* Configure RDY/BSY */
-	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-
-	/* Enable NandFlash */
-	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void cpu9260_macb_hw_init(void)
-{
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
-
-	at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
-
-	at91_phy_reset();
-
-	at91_macb_hw_init();
-}
-#endif
-
-int board_early_init_f(void)
-{
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	writel((1 << ATMEL_ID_PIOA) |
-		(1 << ATMEL_ID_PIOB) |
-		(1 << ATMEL_ID_PIOC),
-		&pmc->pcer);
-
-	at91_seriald_hw_init();
-
-	return 0;
-}
-
-
-int board_init(void)
-{
-	/* arch number of the board */
-#if defined(CONFIG_CPU9G20)
-	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20;
-#elif defined(CONFIG_CPU9260)
-	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260;
-#endif
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_CMD_NAND
-	cpu9260_nand_hw_init();
-#endif
-#ifdef CONFIG_MACB
-	cpu9260_macb_hw_init();
-#endif
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
-#endif
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0);
-#endif
-	return rc;
-}
diff --git a/board/eukrea/cpu9260/led.c b/board/eukrea/cpu9260/led.c
deleted file mode 100644
index 0cfe0a69fb..0000000000
--- a/board/eukrea/cpu9260/led.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- * (C) Copyright 2009
- * Eric Benard <eric@eukrea.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-
-static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF,
-		STATUS_LED_OFF, STATUS_LED_OFF};
-
-void coloured_LED_init(void)
-{
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
-	at91_set_pio_output(CONFIG_RED_LED, 1);
-	at91_set_pio_output(CONFIG_GREEN_LED, 1);
-	at91_set_pio_output(CONFIG_YELLOW_LED, 1);
-	at91_set_pio_output(CONFIG_BLUE_LED, 1);
-
-	at91_set_pio_value(CONFIG_RED_LED, 1);
-	at91_set_pio_value(CONFIG_GREEN_LED, 1);
-	at91_set_pio_value(CONFIG_YELLOW_LED, 1);
-	at91_set_pio_value(CONFIG_BLUE_LED, 1);
-}
-
-void red_led_off(void)
-{
-	at91_set_pio_value(CONFIG_RED_LED, 1);
-	saved_state[STATUS_LED_RED] = STATUS_LED_OFF;
-}
-
-void green_led_off(void)
-{
-	at91_set_pio_value(CONFIG_GREEN_LED, 1);
-	saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF;
-}
-
-void yellow_led_off(void)
-{
-	at91_set_pio_value(CONFIG_YELLOW_LED, 1);
-	saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF;
-}
-
-void blue_led_off(void)
-{
-	at91_set_pio_value(CONFIG_BLUE_LED, 1);
-	saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF;
-}
-
-void red_led_on(void)
-{
-	at91_set_pio_value(CONFIG_RED_LED, 0);
-	saved_state[STATUS_LED_RED] = STATUS_LED_ON;
-}
-
-void green_led_on(void)
-{
-	at91_set_pio_value(CONFIG_GREEN_LED, 0);
-	saved_state[STATUS_LED_GREEN] = STATUS_LED_ON;
-}
-
-void yellow_led_on(void)
-{
-	at91_set_pio_value(CONFIG_YELLOW_LED, 0);
-	saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON;
-}
-
-void blue_led_on(void)
-{
-	at91_set_pio_value(CONFIG_BLUE_LED, 0);
-	saved_state[STATUS_LED_BLUE] = STATUS_LED_ON;
-}
-
-void __led_init(led_id_t mask, int state)
-{
-	__led_set(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
-	if (STATUS_LED_BLUE == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_BLUE])
-			blue_led_off();
-		else
-			blue_led_on();
-	} else if (STATUS_LED_RED == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_RED])
-			red_led_off();
-		else
-			red_led_on();
-	} else if (STATUS_LED_GREEN == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN])
-			green_led_off();
-		else
-			green_led_on();
-	} else if (STATUS_LED_YELLOW == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_YELLOW])
-			yellow_led_off();
-		else
-			yellow_led_on();
-	}
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	if (STATUS_LED_BLUE == mask) {
-		if (STATUS_LED_ON == state)
-			blue_led_on();
-		else
-			blue_led_off();
-	} else if (STATUS_LED_RED == mask) {
-		if (STATUS_LED_ON == state)
-			red_led_on();
-		else
-			red_led_off();
-	} else if (STATUS_LED_GREEN == mask) {
-		if (STATUS_LED_ON == state)
-			green_led_on();
-		else
-			green_led_off();
-	} else if (STATUS_LED_YELLOW == mask) {
-		if (STATUS_LED_ON == state)
-			yellow_led_on();
-		else
-			yellow_led_off();
-	}
-}
diff --git a/board/eukrea/cpuat91/Kconfig b/board/eukrea/cpuat91/Kconfig
deleted file mode 100644
index 27b005cdf4..0000000000
--- a/board/eukrea/cpuat91/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CPUAT91
-
-config SYS_BOARD
-	default "cpuat91"
-
-config SYS_VENDOR
-	default "eukrea"
-
-config SYS_CONFIG_NAME
-	default "cpuat91"
-
-endif
diff --git a/board/eukrea/cpuat91/MAINTAINERS b/board/eukrea/cpuat91/MAINTAINERS
deleted file mode 100644
index 1f6bc798dc..0000000000
--- a/board/eukrea/cpuat91/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-CPUAT91 BOARD
-M:	Eric Benard <eric@eukrea.com>
-S:	Maintained
-F:	board/eukrea/cpuat91/
-F:	include/configs/cpuat91.h
-F:	configs/cpuat91_defconfig
-F:	configs/cpuat91_ram_defconfig
diff --git a/board/eukrea/cpuat91/Makefile b/board/eukrea/cpuat91/Makefile
deleted file mode 100644
index 59b80c267c..0000000000
--- a/board/eukrea/cpuat91/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de. <http://lists.denx.de/mailman/listinfo/u-boot>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cpuat91.o
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c
deleted file mode 100644
index ec0ce0b205..0000000000
--- a/board/eukrea/cpuat91/cpuat91.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2006-2010 Eukrea Electromatique <www.eukrea.com>
- * Eric Benard <eric@eukrea.com>
- * based on at91rm9200dk.c which is :
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
-	/* arch number of CPUAT91-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_CPUAT91;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	at91_seriald_hw_init();
-	return 0;
-}
-
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
-	return at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_SOFT
-void i2c_init_board(void)
-{
-	u32 pin;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	writel(1 << AT91_ID_PIOA, &pmc->pcer);
-	pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK;
-	writel(pin, &pio->pioa.idr);
-	writel(pin, &pio->pioa.pudr);
-	writel(pin, &pio->pioa.per);
-	writel(pin, &pio->pioa.oer);
-	writel(pin, &pio->pioa.sodr);
-}
-#endif