arm: Remove snowball and u8500_href boards

These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

10 files changed, 0 insertions, 1953 deletions

diff --git a/board/st-ericsson/snowball/Kconfig b/board/st-ericsson/snowball/Kconfig
deleted file mode 100644
index 0b3a0cca6c..0000000000
--- a/board/st-ericsson/snowball/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_SNOWBALL
-
-config SYS_BOARD
-	default "snowball"
-
-config SYS_VENDOR
-	default "st-ericsson"
-
-config SYS_SOC
-	default "u8500"
-
-config SYS_CONFIG_NAME
-	default "snowball"
-
-endif
diff --git a/board/st-ericsson/snowball/MAINTAINERS b/board/st-ericsson/snowball/MAINTAINERS
deleted file mode 100644
index 132fc524ba..0000000000
--- a/board/st-ericsson/snowball/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SNOWBALL BOARD
-M:	Mathieu Poirier <mathieu.poirier@linaro.org>
-S:	Maintained
-F:	board/st-ericsson/snowball/
-F:	include/configs/snowball.h
-F:	configs/snowball_defconfig
diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile
deleted file mode 100644
index f0605e2bcd..0000000000
--- a/board/st-ericsson/snowball/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright (C) ST-Ericsson SA 2009
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ccflags-y += -D__RELEASE -D__STN_8500
-
-obj-y	:= snowball.o
diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h
deleted file mode 100644
index e339cb86e2..0000000000
--- a/board/st-ericsson/snowball/db8500_pins.h
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
- * The purpose is that GPIO config found in kernel should work by simply
- * copy-paste it to U-boot.
- *
- * Ported to U-boot by:
- * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com>
- **
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __DB8500_PINS_H
-#define __DB8500_PINS_H
-
-#include <asm/arch/db8500_pincfg.h>
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
-#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
-#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
-#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
-#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
-#define GPIO2_NONE		PIN_CFG(2, ALT_B)
-#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
-#define GPIO3_NONE		PIN_CFG(3, ALT_B)
-#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL		PIN_CFG_PULL(4, ALT_B, UP)
-#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA		PIN_CFG_PULL(5, ALT_B, UP)
-#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL		PIN_CFG_PULL(6, ALT_B, UP)
-#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA		PIN_CFG_PULL(7, ALT_B, UP)
-#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA		PIN_CFG_PULL(8, ALT_A, UP)
-#define GPIO8_I2C2_SDA		PIN_CFG_PULL(8, ALT_B, UP)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL		PIN_CFG_PULL(9, ALT_A, UP)
-#define GPIO9_I2C2_SCL		PIN_CFG_PULL(9, ALT_B, UP)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA	PIN_CFG_PULL(10, ALT_A, UP)
-#define GPIO10_I2C2_SDA		PIN_CFG_PULL(10, ALT_B, UP)
-#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL	PIN_CFG_PULL(11, ALT_A, UP)
-#define GPIO11_I2C2_SCL		PIN_CFG_PULL(11, ALT_B, UP)
-#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
-#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
-#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL		PIN_CFG_PULL(16, ALT_B, UP)
-#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA		PIN_CFG_PULL(17, ALT_B, UP)
-#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR	PIN_CFG(18, ALT_A)
-#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
-#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR	PIN_CFG(19, ALT_A)
-#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
-#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR	PIN_CFG(20, ALT_A)
-#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
-#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR	PIN_CFG(21, ALT_A)
-#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
-#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK	PIN_CFG(22, ALT_A)
-#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
-#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK		PIN_CFG(23, ALT_A)
-#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
-#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD		PIN_CFG(24, ALT_A)
-#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
-#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0		PIN_CFG(25, ALT_A)
-#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
-#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1		PIN_CFG(26, ALT_A)
-#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
-#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2		PIN_CFG(27, ALT_A)
-#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
-#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3		PIN_CFG(28, ALT_A)
-#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
-#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
-#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
-#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
-#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
-#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
-#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
-#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
-#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
-#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
-#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
-#define GPIO34_NONE		PIN_CFG(34, ALT_B)
-#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
-#define GPIO35_NONE		PIN_CFG(35, ALT_B)
-#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
-
-#define GPIO36_GPIO		PIN_CFG(36, GPIO)
-#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
-#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
-#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
-#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
-#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
-#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
-#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
-#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
-#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
-#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
-#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
-#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
-#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
-#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
-#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
-#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
-#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
-#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
-#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
-#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
-#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
-#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
-#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
-#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
-#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
-#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
-#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
-#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
-#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
-#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
-#define GPIO77_NONE		PIN_CFG(77, ALT_C)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
-#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
-#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
-#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
-#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
-#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
-#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
-#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
-#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
-#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
-
-#define GPIO83_GPIO		PIN_CFG(83, GPIO)
-#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
-#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
-
-#define GPIO84_GPIO		PIN_CFG_PULL(84, GPIO, UP)
-#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
-#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
-
-#define GPIO85_GPIO		PIN_CFG(85, GPIO)
-#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
-#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
-
-#define GPIO86_GPIO		PIN_CFG(86, GPIO)
-#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
-#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
-#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
-
-#define GPIO87_GPIO		PIN_CFG(87, GPIO)
-#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
-#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
-#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
-
-#define GPIO88_GPIO		PIN_CFG(88, GPIO)
-#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
-#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
-#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
-
-#define GPIO89_GPIO		PIN_CFG(89, GPIO)
-#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
-#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
-#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
-
-#define GPIO90_GPIO		PIN_CFG(90, GPIO)
-#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
-#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
-#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
-
-#define GPIO91_GPIO		PIN_CFG(91, GPIO)
-#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
-#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
-#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
-
-#define GPIO92_GPIO		PIN_CFG(92, GPIO)
-#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
-#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
-#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
-
-#define GPIO93_GPIO		PIN_CFG(93, GPIO)
-#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
-#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
-#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
-
-#define GPIO94_GPIO		PIN_CFG(94, GPIO)
-#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
-#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
-#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
-
-#define GPIO95_GPIO		PIN_CFG(95, GPIO)
-#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
-#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
-#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
-#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
-#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
-#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
-#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK		PIN_CFG(128, ALT_A)
-#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD		PIN_CFG(129, ALT_A)
-#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK	PIN_CFG(130, ALT_A)
-#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
-#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0	PIN_CFG(131, ALT_A)
-#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1	PIN_CFG(132, ALT_A)
-#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2	PIN_CFG(133, ALT_A)
-#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3	PIN_CFG(134, ALT_A)
-#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4	PIN_CFG(135, ALT_A)
-#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5	PIN_CFG(136, ALT_A)
-#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6	PIN_CFG(137, ALT_A)
-#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7	PIN_CFG(138, ALT_A)
-#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
-#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
-#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
-#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
-#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
-#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
-#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
-#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
-#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL	PIN_CFG_PULL(147, ALT_A, UP)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA	PIN_CFG_PULL(148, ALT_A, UP)
-
-#define GPIO149_GPIO		PIN_CFG(149, GPIO)
-#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
-#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
-#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
-
-#define GPIO150_GPIO		PIN_CFG(150, GPIO)
-#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
-#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
-
-#define GPIO151_GPIO		PIN_CFG(151, GPIO)
-#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
-#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
-#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
-
-#define GPIO152_GPIO		PIN_CFG(152, GPIO)
-#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
-#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
-#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
-
-#define GPIO153_GPIO		PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7		PIN_CFG_PULL(153, ALT_A, DOWN)
-#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
-#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
-
-#define GPIO154_GPIO		PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6		PIN_CFG_PULL(154, ALT_A, DOWN)
-#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
-#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
-
-#define GPIO155_GPIO		PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5		PIN_CFG_PULL(155, ALT_A, DOWN)
-#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
-#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
-
-#define GPIO156_GPIO		PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4		PIN_CFG_PULL(156, ALT_A, DOWN)
-#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
-#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
-
-#define GPIO157_GPIO		PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7		PIN_CFG_PULL(157, ALT_A, UP)
-#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
-#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
-
-#define GPIO158_GPIO		PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6		PIN_CFG_PULL(158, ALT_A, UP)
-#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
-#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
-
-#define GPIO159_GPIO		PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5		PIN_CFG_PULL(159, ALT_A, UP)
-#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
-#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4		PIN_CFG_PULL(160, ALT_A, UP)
-#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
-#define GPIO160_NONE		PIN_CFG(160, ALT_C)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3		PIN_CFG_PULL(161, ALT_A, DOWN)
-#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
-#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2		PIN_CFG_PULL(162, ALT_A, DOWN)
-#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
-#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1		PIN_CFG_PULL(163, ALT_A, DOWN)
-#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
-#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0		PIN_CFG_PULL(164, ALT_A, UP)
-#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
-#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3		PIN_CFG_PULL(165, ALT_A, UP)
-#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
-#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2		PIN_CFG_PULL(166, ALT_A, UP)
-#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
-#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1		PIN_CFG_PULL(167, ALT_A, UP)
-#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
-#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0		PIN_CFG_PULL(168, ALT_A, UP)
-#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
-#define GPIO168_NONE		PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
-#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
-#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
-#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
-#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
-#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
-#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3	PIN_CFG(197, ALT_A)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2	PIN_CFG(198, ALT_A)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1	PIN_CFG(199, ALT_A)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0	PIN_CFG(200, ALT_A)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD		PIN_CFG(201, ALT_A)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK	PIN_CFG(202, ALT_A)
-#define GPIO202_PWL		PIN_CFG(202, ALT_B)
-#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK		PIN_CFG(203, ALT_A)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7	PIN_CFG(204, ALT_A)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6	PIN_CFG(205, ALT_A)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5	PIN_CFG(206, ALT_A)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4	PIN_CFG(207, ALT_A)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
-#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
-#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
-#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
-#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
-#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
-#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
-#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA	PIN_CFG_PULL(216, ALT_C, UP)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
-#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
-#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
-#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL	PIN_CFG_PULL(218, ALT_C, UP)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
-#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
-#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
-#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
-#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
-#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
-#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
-#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
-#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
-#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
-#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
-#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
-#define GPIO226_PWL		PIN_CFG(226, ALT_B)
-#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
-
-#define GPIO228_GPIO		PIN_CFG(228, GPIO)
-#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
-
-#define GPIO229_GPIO		PIN_CFG(229, GPIO)
-#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
-#define GPIO229_PWL		PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA	PIN_CFG_PULL(229, ALT_C, UP)
-
-#define GPIO230_GPIO		PIN_CFG(230, GPIO)
-#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
-#define GPIO230_PWL		PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL	PIN_CFG_PULL(230, ALT_C, UP)
-
-#define GPIO256_GPIO		PIN_CFG(256, GPIO)
-#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
-
-#define GPIO257_GPIO		PIN_CFG(257, GPIO)
-#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
-
-#define GPIO258_GPIO		PIN_CFG(258, GPIO)
-#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
-#define GPIO258_NONE		PIN_CFG(258, ALT_B)
-#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
-
-#define GPIO259_GPIO		PIN_CFG(259, GPIO)
-#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
-
-#define GPIO260_GPIO		PIN_CFG(260, GPIO)
-#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
-
-#define GPIO261_GPIO		PIN_CFG(261, GPIO)
-#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
-
-#define GPIO262_GPIO		PIN_CFG(262, GPIO)
-#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
-
-#define GPIO263_GPIO		PIN_CFG(263, GPIO)
-#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
-
-#define GPIO264_GPIO		PIN_CFG(264, GPIO)
-#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
-
-#define GPIO265_GPIO		PIN_CFG(265, GPIO)
-#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
-
-#define GPIO266_GPIO		PIN_CFG(266, GPIO)
-#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
-
-#define GPIO267_GPIO		PIN_CFG(267, GPIO)
-#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
-
-#endif
diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
deleted file mode 100644
index c3061e20d9..0000000000
--- a/board/st-ericsson/snowball/snowball.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/db8500_pincfg.h>
-#include <asm/arch/prcmu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_MMC
-#include "../../../drivers/mmc/arm_pl180_mmci.h"
-#endif
-#include "db8500_pins.h"
-
-/*
- * Get a global data pointer
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Memory controller register
- */
-#define DMC_BASE_ADDR			0x80156000
-#define DMC_CTL_97			(DMC_BASE_ADDR + 0x184)
-
-/*
- * GPIO pin config common for MOP500/HREF boards
- */
-unsigned long gpio_cfg_common[] = {
-	/* I2C */
-	GPIO147_I2C0_SCL,
-	GPIO148_I2C0_SDA,
-	GPIO16_I2C1_SCL,
-	GPIO17_I2C1_SDA,
-	GPIO10_I2C2_SDA,
-	GPIO11_I2C2_SCL,
-	GPIO229_I2C3_SDA,
-	GPIO230_I2C3_SCL,
-
-	/* SSP0, to AB8500 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD | PIN_PULL_DOWN,
-	GPIO146_SSP0_TXD,
-
-	/* MMC0 (MicroSD card) */
-	GPIO18_MC0_CMDDIR	| PIN_OUTPUT_HIGH,
-	GPIO19_MC0_DAT0DIR	| PIN_OUTPUT_HIGH,
-	GPIO20_MC0_DAT2DIR	| PIN_OUTPUT_HIGH,
-	GPIO21_MC0_DAT31DIR	| PIN_OUTPUT_HIGH,
-	GPIO22_MC0_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO23_MC0_CLK		| PIN_OUTPUT_LOW,
-	GPIO24_MC0_CMD		| PIN_INPUT_PULLUP,
-	GPIO25_MC0_DAT0		| PIN_INPUT_PULLUP,
-	GPIO26_MC0_DAT1		| PIN_INPUT_PULLUP,
-	GPIO27_MC0_DAT2		| PIN_INPUT_PULLUP,
-	GPIO28_MC0_DAT3		| PIN_INPUT_PULLUP,
-
-	/* MMC4 (On-board eMMC) */
-	GPIO197_MC4_DAT3	| PIN_INPUT_PULLUP,
-	GPIO198_MC4_DAT2	| PIN_INPUT_PULLUP,
-	GPIO199_MC4_DAT1	| PIN_INPUT_PULLUP,
-	GPIO200_MC4_DAT0	| PIN_INPUT_PULLUP,
-	GPIO201_MC4_CMD		| PIN_INPUT_PULLUP,
-	GPIO202_MC4_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO203_MC4_CLK		| PIN_OUTPUT_LOW,
-	GPIO204_MC4_DAT7	| PIN_INPUT_PULLUP,
-	GPIO205_MC4_DAT6	| PIN_INPUT_PULLUP,
-	GPIO206_MC4_DAT5	| PIN_INPUT_PULLUP,
-	GPIO207_MC4_DAT4	| PIN_INPUT_PULLUP,
-
-	/* UART2, console */
-	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
-	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
-	GPIO31_U2_CTSn	| PIN_INPUT_PULLUP,
-	GPIO32_U2_RTSn	| PIN_OUTPUT_HIGH,
-
-	/*
-	 * USB, pin 256-267 USB, Is probably already setup correctly from
-	 * BootROM/boot stages, but we don't trust that and set it up anyway
-	 */
-	GPIO256_USB_NXT,
-	GPIO257_USB_STP,
-	GPIO258_USB_XCLK,
-	GPIO259_USB_DIR,
-	GPIO260_USB_DAT7,
-	GPIO261_USB_DAT6,
-	GPIO262_USB_DAT5,
-	GPIO263_USB_DAT4,
-	GPIO264_USB_DAT3,
-	GPIO265_USB_DAT2,
-	GPIO266_USB_DAT1,
-	GPIO267_USB_DAT0,
-};
-
-unsigned long gpio_cfg_snowball[] = {
-	/* MMC0 (MicroSD card) */
-	GPIO217_GPIO    | PIN_OUTPUT_HIGH,      /* MMC_EN */
-	GPIO218_GPIO    | PIN_INPUT_NOPULL,     /* MMC_CD */
-	GPIO228_GPIO    | PIN_OUTPUT_HIGH,      /* SD_SEL */
-
-	/* eMMC */
-	GPIO167_GPIO    | PIN_OUTPUT_HIGH,      /* RSTn_MLC */
-
-	/* LAN */
-	GPIO131_SM_ADQ8,
-	GPIO132_SM_ADQ9,
-	GPIO133_SM_ADQ10,
-	GPIO134_SM_ADQ11,
-	GPIO135_SM_ADQ12,
-	GPIO136_SM_ADQ13,
-	GPIO137_SM_ADQ14,
-	GPIO138_SM_ADQ15,
-
-	/* RSTn_LAN */
-	GPIO141_GPIO	| PIN_OUTPUT_HIGH,
-};
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
-	/*
-	 * Setup board (bd) and board-info (bi).
-	 * bi_arch_number: Unique id for this board. It will passed in r1 to
-	 *    Linux startup code and is the machine_id.
-	 * bi_boot_params: Where this board expects params.
-	 */
-	gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL;
-	gd->bd->bi_boot_params = 0x00000100;
-
-	/* Configure GPIO pins needed by U-boot */
-	db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common));
-
-	db8500_gpio_config_pins(gpio_cfg_snowball,
-						ARRAY_SIZE(gpio_cfg_snowball));
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->ram_size = gd->bd->bi_dram[0].size =
-		get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
-	return 0;
-}
-
-static int raise_ab8500_gpio16(void)
-{
-	int ret;
-
-	/* selection */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x80;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret);
-	if (ret < 0)
-		goto out;
-
-	/* direction */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x80;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret);
-	if (ret < 0)
-		goto out;
-
-	/* out */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x80;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret);
-
-out:
-	return ret;
-}
-
-static int raise_ab8500_gpio26(void)
-{
-	int ret;
-
-	/* selection */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x2;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret);
-	if (ret < 0)
-		goto out;
-
-	/* out */
-	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG);
-	if (ret < 0)
-		goto out;
-
-	ret |= 0x2;
-	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret);
-
-out:
-	return ret;
-}
-
-int board_late_init(void)
-{
-	/* enable 3V3 for LAN controller */
-	if (raise_ab8500_gpio26() >= 0) {
-		/* Turn on FSMC device */
-		writel(0x1, 0x8000f000);
-		writel(0x1, 0x8000f008);
-
-		/* setup FSMC for LAN controler */
-		writel(0x305b, 0x80000000);
-
-		/* run at the highest possible speed */
-		writel(0x01010210, 0x80000004);
-	} else
-		printf("error: can't raise GPIO26\n");
-
-	/* enable 3v6 for GBF chip */
-	if ((raise_ab8500_gpio16() < 0))
-		printf("error: cant' raise GPIO16\n");
-
-	/* empty UART RX FIFO */
-	while (tstc())
-		(void) getc();
-
-	return 0;
-}
-
-#ifdef CONFIG_MMC
-/*
- * emmc_host_init - initialize the emmc controller.
- * Configure GPIO settings, set initial clock and power for emmc slot.
- * Initialize mmc struct and register with mmc framework.
- */
-static int emmc_host_init(void)
-{
-	struct pl180_mmc_host *host;
-
-	host = malloc(sizeof(struct pl180_mmc_host));
-	if (!host)
-		return -ENOMEM;
-	memset(host, 0, sizeof(*host));
-
-	host->base = (struct sdi_registers *)CFG_EMMC_BASE;
-	host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
-	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
-				 SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
-	strcpy(host->name, "EMMC");
-	host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz;
-	host->voltages = VOLTAGE_WINDOW_MMC;
-	host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
-	host->clock_max = ARM_MCLK / 2;
-	host->clock_in = ARM_MCLK;
-	host->version2 = 1;
-
-	return arm_pl180_mmci_init(host);
-}
-
-/*
- * mmc_host_init - initialize the external mmc controller.
- * Configure GPIO settings, set initial clock and power for mmc slot.
- * Initialize mmc struct and register with mmc framework.
- */
-static int mmc_host_init(void)
-{
-	struct pl180_mmc_host *host;
-	u32 sdi_u32;
-
-	host = malloc(sizeof(struct pl180_mmc_host));
-	if (!host)
-		return -ENOMEM;
-	memset(host, 0, sizeof(*host));
-
-	host->base = (struct sdi_registers *)CFG_MMC_BASE;
-	sdi_u32 = 0xBF;
-	writel(sdi_u32, &host->base->power);
-	host->pwr_init = 0xBF;
-	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
-				 SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
-	strcpy(host->name, "MMC");
-	host->caps = MMC_MODE_8BIT;
-	host->b_max = 0;
-	host->voltages = VOLTAGE_WINDOW_SD;
-	host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
-	host->clock_max = ARM_MCLK / 2;
-	host->clock_in = ARM_MCLK;
-	host->version2 = 1;
-
-	return arm_pl180_mmci_init(host);
-}
-
-/*
- * board_mmc_init - initialize all the mmc/sd host controllers.
- * Called by generic mmc framework.
- */
-int board_mmc_init(bd_t *bis)
-{
-	int error;
-
-	(void) bis;
-
-	error = emmc_host_init();
-	if (error) {
-		printf("emmc_host_init() %d\n", error);
-		return -1;
-	}
-
-	u8500_mmc_power_init();
-
-	error = mmc_host_init();
-	if (error) {
-		printf("mmc_host_init() %d\n", error);
-		return -1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_MMC */
diff --git a/board/st-ericsson/u8500/Kconfig b/board/st-ericsson/u8500/Kconfig
deleted file mode 100644
index 909f30db4b..0000000000
--- a/board/st-ericsson/u8500/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_U8500_HREF
-
-config SYS_BOARD
-	default "u8500"
-
-config SYS_VENDOR
-	default "st-ericsson"
-
-config SYS_SOC
-	default "u8500"
-
-config SYS_CONFIG_NAME
-	default "u8500_href"
-
-endif
diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS
deleted file mode 100644
index e2581eb2e4..0000000000
--- a/board/st-ericsson/u8500/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-U8500 BOARD
-#M:	-
-S:	Maintained
-F:	board/st-ericsson/u8500/
-F:	include/configs/u8500_href.h
-F:	configs/u8500_href_defconfig
diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile
deleted file mode 100644
index d6c4280475..0000000000
--- a/board/st-ericsson/u8500/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright (C) ST-Ericsson SA 2009
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ccflags-y += -D__RELEASE -D__STN_8500
-
-obj-y	:= u8500_href.o gpio.o
diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c
deleted file mode 100644
index 2ddc7af48b..0000000000
--- a/board/st-ericsson/u8500/gpio.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/gpio.h>
-
-static struct gpio_register *addr_gpio_register[] = {
-	(void *)U8500_GPIO_0_BASE,
-	(void *)U8500_GPIO_1_BASE,
-	(void *)U8500_GPIO_2_BASE,
-	(void *)U8500_GPIO_3_BASE,
-	(void *)U8500_GPIO_4_BASE,
-	(void *)U8500_GPIO_5_BASE,
-	(void *)U8500_GPIO_6_BASE,
-	(void *)U8500_GPIO_7_BASE,
-	(void *)U8500_GPIO_8_BASE,
-};
-
-struct gpio_altfun_data altfun_table[] = {
-	{
-		.altfun = GPIO_ALT_I2C_0,
-		.start = 147,
-		.end = 148,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_I2C_1,
-		.start = 16,
-		.end = 17,
-		.cont = 0,
-		.type = GPIO_ALTF_B,
-	},
-	{
-		.altfun = GPIO_ALT_I2C_2,
-		.start = 10,
-		.end = 11,
-		.cont = 0,
-		.type = GPIO_ALTF_B,
-	},
-	{
-		.altfun = GPIO_ALT_I2C_3,
-		.start = 229,
-		.end = 230,
-		.cont = 0,
-		.type = GPIO_ALTF_C,
-	},
-	{
-		.altfun = GPIO_ALT_UART_0_MODEM,
-		.start = 0,
-		.end = 3,
-		.cont = 1,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_UART_0_MODEM,
-		.start = 33,
-		.end = 36,
-		.cont = 0,
-		.type = GPIO_ALTF_C,
-	},
-	{
-		.altfun = GPIO_ALT_UART_1,
-		.start = 4,
-		.end = 7,
-		.cont = 0,
-		.type =
-			GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_UART_2,
-		.start = 18,
-		.end = 19,
-		.cont = 1,
-		.type = GPIO_ALTF_B,
-	},
-	{
-		.altfun = GPIO_ALT_UART_2,
-		.start = 29,
-		.end = 32,
-		.cont = 0,
-		.type = GPIO_ALTF_C,
-	},
-	{
-		.altfun = GPIO_ALT_MSP_0,
-		.start = 12,
-		.end = 17,
-		.cont = 1,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_MSP_0,
-		.start = 21,
-		.end = 21,
-		.cont = 0,
-		.type = GPIO_ALTF_B,
-	},
-	{
-		.altfun = GPIO_ALT_MSP_1,
-		.start = 33,
-		.end = 36,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_MSP_2,
-		.start = 192,
-		.end = 196,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_LCD_PANEL,
-		.start = 64,
-		.end = 93,
-		.cont = 1,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_LCD_PANEL,
-		.start = 150,
-		.end = 171,
-		.cont = 0,
-		.type = GPIO_ALTF_B,
-	},
-	{
-		.altfun = GPIO_ALT_SD_CARD0,
-		.start = 18,
-		.end = 28,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_MM_CARD0,
-		.start = 18,
-		.end = 32,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_USB_OTG,
-		.start = 256,
-		.end = 267,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_EMMC,
-		.start = 197,
-		.end = 207,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-	{
-		.altfun = GPIO_ALT_POP_EMMC,
-		.start = 128,
-		.end = 138,
-		.cont = 0,
-		.type = GPIO_ALTF_A,
-	},
-};
-
-/*
- * Static Function declarations
- */
-enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config)
-{
-	struct gpio_register *p_gpio_register =
-	    addr_gpio_register[GPIO_BLOCK(pin_id)];
-	u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
-	enum gpio_error error = GPIO_OK;
-	u32 temp_reg;
-
-	switch (config->mode) {
-	case GPIO_ALTF_A:
-		temp_reg = readl(&p_gpio_register->gpio_afsa);
-		temp_reg |= mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsa);
-		temp_reg = readl(&p_gpio_register->gpio_afsb);
-		temp_reg &= ~mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsb);
-		break;
-	case GPIO_ALTF_B:
-		temp_reg = readl(&p_gpio_register->gpio_afsa);
-		temp_reg &= ~mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsa);
-		temp_reg = readl(&p_gpio_register->gpio_afsb);
-		temp_reg |= mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsb);
-		break;
-	case GPIO_ALTF_C:
-		temp_reg = readl(&p_gpio_register->gpio_afsa);
-		temp_reg |= mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsa);
-		temp_reg = readl(&p_gpio_register->gpio_afsb);
-		temp_reg |= mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsb);
-		break;
-	case GPIO_MODE_SOFTWARE:
-		temp_reg = readl(&p_gpio_register->gpio_afsa);
-		temp_reg &= ~mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsa);
-		temp_reg = readl(&p_gpio_register->gpio_afsb);
-		temp_reg &= ~mask;
-		writel(temp_reg, &p_gpio_register->gpio_afsb);
-
-		switch (config->direction) {
-		case GPIO_DIR_INPUT:
-			writel(mask, &p_gpio_register->gpio_dirc);
-			break;
-		case GPIO_DIR_OUTPUT:
-			writel(mask, &p_gpio_register->gpio_dirs);
-			break;
-		case GPIO_DIR_LEAVE_UNCHANGED:
-			break;
-		default:
-			return GPIO_INVALID_PARAMETER;
-		}
-
-		break;
-	case GPIO_MODE_LEAVE_UNCHANGED:
-		break;
-	default:
-		return GPIO_INVALID_PARAMETER;
-	}
-	return error;
-}
-
-enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name)
-{
-	struct gpio_register *p_gpio_register =
-	    addr_gpio_register[GPIO_BLOCK(pin_id)];
-	u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
-	enum gpio_error error = GPIO_OK;
-	u32 temp_reg;
-
-	temp_reg = readl(&p_gpio_register->gpio_afsa);
-	temp_reg &= ~mask;
-	writel(temp_reg, &p_gpio_register->gpio_afsa);
-	temp_reg = readl(&p_gpio_register->gpio_afsb);
-	temp_reg &= ~mask;
-	writel(temp_reg, &p_gpio_register->gpio_afsb);
-	writel(mask, &p_gpio_register->gpio_dirc);
-
-	return error;
-}
-
-struct gpio_config altfun_pinconfig;
-enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func,
-			    int which_altfunc, char *dev_name)
-{
-	int i, j, start, end;
-	enum gpio_error error = -1;
-
-	for (i = 0; i < ARRAY_SIZE(altfun_table); i++) {
-		if (altfun_table[i].altfun != alt_func)
-			continue;
-
-		start = altfun_table[i].start;
-		end = altfun_table[i].end;
-		for (j = start; j <= end; j++) {
-			if (which_altfunc == GPIO_ALTF_FIND)
-				altfun_pinconfig.mode = altfun_table[i].type;
-			else
-				altfun_pinconfig.mode = which_altfunc;
-			altfun_pinconfig.direction = GPIO_DIR_OUTPUT;
-			altfun_pinconfig.dev_name = dev_name;
-
-			if (which_altfunc != GPIO_ALTF_DISABLE)
-				error = gpio_setpinconfig(j, &altfun_pinconfig);
-			else
-				error = gpio_resetgpiopin(j, dev_name);
-			if (!error)
-				continue;
-			printf("GPIO %d configuration failure (nmdk_error:%d)",
-				j, error);
-			error = GPIO_INVALID_PARAMETER;
-			return error;
-		}
-
-		if (!altfun_table[i].cont)
-			break;
-	}
-	return error;
-}
-
-int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name)
-{
-	struct gpio_register *p_gpio_register =
-	    addr_gpio_register[GPIO_BLOCK(pin_id)];
-	u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
-
-	switch (value) {
-	case GPIO_DATA_HIGH:
-		writel(mask, &p_gpio_register->gpio_dats);
-		break;
-	case GPIO_DATA_LOW:
-		writel(mask, &p_gpio_register->gpio_datc);
-		break;
-	default:
-		printf("Invalid value passed in %s", __FUNCTION__);
-		return GPIO_INVALID_PARAMETER;
-	}
-	return GPIO_OK;
-}
-
-int gpio_readpin(int pin_id, enum gpio_data *rv)
-{
-	struct gpio_register *p_gpio_register =
-	    addr_gpio_register[GPIO_BLOCK(pin_id)];
-	u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK);
-
-	if ((readl(&p_gpio_register->gpio_dat) & mask) != 0)
-		*rv = GPIO_DATA_HIGH;
-	else
-		*rv = GPIO_DATA_LOW;
-	return GPIO_OK;
-}
-
-int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name)
-{
-	return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name);
-}
-
-int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name)
-{
-	return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name);
-}
diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c
deleted file mode 100644
index 9df499b1dc..0000000000
--- a/board/st-ericsson/u8500/u8500_href.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2009
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <malloc.h>
-#include <i2c.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/prcmu.h>
-#ifdef CONFIG_MMC
-#include "../../../drivers/mmc/arm_pl180_mmci.h"
-#endif
-
-#define NOMADIK_PER4_BASE	(0x80150000)
-#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000)
-#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000)
-
-/* Power, Reset, Clock Management Unit */
-/*
- * SVA: Smart Video Accelerator
- * SIA: Smart Imaging Accelerator
- * SGA: Smart Graphic accelerator
- * B2R2: Graphic blitter
- */
-#define PRCM_ARMCLKFIX_MGT_REG		(PRCMU_BASE + 0x000)
-#define PRCM_ACLK_MGT_REG		(PRCMU_BASE + 0x004)
-#define PRCM_SVAMMDSPCLK_MGT_REG	(PRCMU_BASE + 0x008)
-#define PRCM_SIAMMDSPCLK_MGT_REG	(PRCMU_BASE + 0x00C)
-#define PRCM_SAAMMDSPCLK_MGT_REG	(PRCMU_BASE + 0x010)
-#define PRCM_SGACLK_MGT_REG		(PRCMU_BASE + 0x014)
-#define PRCM_UARTCLK_MGT_REG		(PRCMU_BASE + 0x018)
-#define PRCM_MSPCLK_MGT_REG		(PRCMU_BASE + 0x01C)
-#define PRCM_I2CCLK_MGT_REG		(PRCMU_BASE + 0x020)
-#define PRCM_SDMMCCLK_MGT_REG		(PRCMU_BASE + 0x024)
-#define PRCM_SLIMCLK_MGT_REG		(PRCMU_BASE + 0x028)
-#define PRCM_PER1CLK_MGT_REG		(PRCMU_BASE + 0x02C)
-#define PRCM_PER2CLK_MGT_REG		(PRCMU_BASE + 0x030)
-#define PRCM_PER3CLK_MGT_REG		(PRCMU_BASE + 0x034)
-#define PRCM_PER5CLK_MGT_REG		(PRCMU_BASE + 0x038)
-#define PRCM_PER6CLK_MGT_REG		(PRCMU_BASE + 0x03C)
-#define PRCM_PER7CLK_MGT_REG		(PRCMU_BASE + 0x040)
-#define PRCM_DMACLK_MGT_REG		(PRCMU_BASE + 0x074)
-#define PRCM_B2R2CLK_MGT_REG		(PRCMU_BASE + 0x078)
-
-#define PRCM_PLLSOC0_FREQ_REG		(PRCMU_BASE + 0x080)
-#define PRCM_PLLSOC1_FREQ_REG		(PRCMU_BASE + 0x084)
-#define PRCM_PLLARM_FREQ_REG		(PRCMU_BASE + 0x088)
-#define PRCM_PLLDDR_FREQ_REG		(PRCMU_BASE + 0x08C)
-#define PRCM_ARM_CHGCLKREQ_REG		(PRCMU_BASE + 0x114)
-
-#define PRCM_TCR			(PRCMU_BASE + 0x1C8)
-
-/*
- * Memory controller register
- */
-#define DMC_BASE_ADDR			0x80156000
-#define DMC_CTL_97			(DMC_BASE_ADDR + 0x184)
-
-int board_id;	/* set in board_late_init() */
-
-/* PLLs for clock management registers */
-enum {
-	GATED = 0,
-	PLLSOC0,	/* pllsw = 001, ffs() = 1 */
-	PLLSOC1,	/* pllsw = 010, ffs() = 2 */
-	PLLDDR,		/* pllsw = 100, ffs() = 3 */
-	PLLARM,
-};
-
-static struct pll_freq_regs {
-	int idx;	/* index fror pll_name and pll_khz arrays */
-	uint32_t addr;
-} pll_freq_regs[] = {
-	{PLLSOC0, PRCM_PLLSOC0_FREQ_REG},
-	{PLLSOC1, PRCM_PLLSOC1_FREQ_REG},
-	{PLLDDR, PRCM_PLLDDR_FREQ_REG},
-	{PLLARM, PRCM_PLLARM_FREQ_REG},
-	{0, 0},
-};
-
-static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"};
-static uint32_t pll_khz[5];	/* use ffs(pllsw(reg)) as index for 0..3 */
-
-static struct clk_mgt_regs {
-	uint32_t addr;
-	uint32_t val;
-	const char *descr;
-} clk_mgt_regs[] = {
-	/* register content taken from bootrom settings */
-	{PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */
-	{PRCM_ACLK_MGT_REG, 0x0125, "ACLK"},	/* ena, SOC0/5, 160 MHz */
-	{PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */
-	{PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */
-	{PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */
-	{PRCM_SGACLK_MGT_REG, 0x0024, "SGA"},	/* dis, SOC0/4, 200 MHz */
-	{PRCM_UARTCLK_MGT_REG, 0x0300, "UART"},	/* ena, GATED, CLK38 */
-	{PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"},	/* dis, GATED, CLK38 */
-	{PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"},	/* ena, SOC0/16, 50 MHz */
-	{PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */
-	{PRCM_PER1CLK_MGT_REG, 0x126, "PER1"},	/* ena, SOC0/6, 133 MHz */
-	{PRCM_PER2CLK_MGT_REG, 0x126, "PER2"},	/* ena, SOC0/6, 133 MHz */
-	{PRCM_PER3CLK_MGT_REG, 0x126, "PER3"},	/* ena, SOC0/6, 133 MHz */
-	{PRCM_PER5CLK_MGT_REG, 0x126, "PER5"},	/* ena, SOC0/6, 133 MHz */
-	{PRCM_PER6CLK_MGT_REG, 0x126, "PER6"},	/* ena, SOC0/6, 133 MHz */
-	{PRCM_PER7CLK_MGT_REG, 0x128, "PER7"},	/* ena, SOC0/8, 100 MHz */
-	{PRCM_DMACLK_MGT_REG, 0x125, "DMA"},	/* ena, SOC0/5, 160 MHz */
-	{PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"},	/* dis, SOC0/5, 160 MHz */
-	{0, 0, NULL},
-};
-
-static void init_regs(void);
-
-DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
-	printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f(void)
-{
-	init_regs();
-	return 0;
-}
-
-int board_init(void)
-{
-	uint32_t unused_cols_rows;
-	unsigned int nrows;
-	unsigned int ncols;
-
-	gd->bd->bi_arch_number = 0x1A4;
-	gd->bd->bi_boot_params = 0x00000100;
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-
-	/*
-	 * Assumption: 2 CS active, both CS have same layout.
-	 *             15 rows max, 11 cols max (controller spec).
-	 *             memory chip has 8 banks, I/O width 32 bit.
-	 * The correct way would be to read MR#8: I/O width and density,
-	 * but this requires locking against the PRCMU firmware.
-	 * Simplified approach:
-	 * Read number of unused rows and columns from mem controller.
-	 * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes
-	 */
-	unused_cols_rows = readl(DMC_CTL_97);
-	nrows = 15 - (unused_cols_rows & 0x07);
-	ncols = 11 - ((unused_cols_rows & 0x0700) >> 8);
-	gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4;
-
-	icache_enable();
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = PHYS_SDRAM_SIZE_1;
-
-	return 0;
-}
-
-unsigned int addr_vall_arr[] = {
-	0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */
-	0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */
-	0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
-	0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
-	0x80157020, 0x00000150, /* I2C 48MHz clock */
-	0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
-	0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
-	0xA03DF000, 0x0000000D, /* Clock for MTU Timers */
-	0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */
-	0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
-	0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
-	0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */
-	0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */
-	0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */
-	0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */
-	0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */
-	0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */
-	0x801571E4, 0x0000000C, /* PRCMU settings for B2R2,
-				   PRCM_APE_RESETN_SET_REG */
-	0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */
-	0xA03FF000, 0x00000003, /* USB */
-	0xA03FF008, 0x00000001, /* USB */
-	0xA03FE00C, 0x00000000, /* USB */
-	0xA03FE020, 0x00000FFF, /* USB */
-	0xA03FE024, 0x00000000	/* USB */
-};
-
-#ifdef CONFIG_BOARD_LATE_INIT
-/*
- * called after all initialisation were done, but before the generic
- * mmc_initialize().
- */
-int board_late_init(void)
-{
-	uchar byte;
-
-	/*
-	 * Determine and set board_id environment variable
-	 * 0: mop500, 1: href500
-	 * Above boards have different GPIO expander chips which we can
-	 * distinguish by the chip id.
-	 *
-	 * The board_id environment variable is needed for the Linux bootargs.
-	 */
-	(void) i2c_set_bus_num(0);
-	(void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1);
-	if (byte == 0x01) {
-		board_id = 0;
-		setenv("board_id", "0");
-	} else {
-		board_id = 1;
-		setenv("board_id", "1");
-	}
-#ifdef CONFIG_MMC
-	u8500_mmc_power_init();
-
-	/*
-	 * config extended GPIO pins for level shifter and
-	 * SDMMC_ENABLE
-	 */
-	if (board_id == 0) {
-		/* MOP500 */
-		byte = 0x0c;
-		(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1);
-		(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1);
-	} else {
-		/* HREF */
-		/* set the direction of GPIO KPY9 and KPY10 */
-		byte = 0x06;
-		(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1);
-		/* must be a multibyte access */
-		(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1,
-						(uchar []) {0x06, 0x06}, 2);
-	}
-#endif /* CONFIG_MMC */
-	/*
-	 * Create a memargs variable which points uses either the memargs256 or
-	 * memargs512 environment variable, depending on the memory size.
-	 * memargs is used to build the bootargs, memargs256 and memargs512 are
-	 * stored in the environment.
-	 */
-	if (gd->bd->bi_dram[0].size == 0x10000000) {
-		setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}");
-		setenv("mem", "256M");
-	} else {
-		setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}");
-		setenv("mem", "512M");
-	}
-
-	return 0;
-}
-#endif /* CONFIG_BOARD_LATE_INIT */
-
-static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits)
-{
-	writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats);
-	writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis);
-}
-
-static void init_regs(void)
-{
-	/* FIXME Remove magic register array settings for ED also */
-	struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE;
-
-	/* Enable timers */
-	writel(1 << 17, &prcmu->tcr);
-
-	u8500_prcmu_enable(&prcmu->per1clk_mgt);
-	u8500_prcmu_enable(&prcmu->per2clk_mgt);
-	u8500_prcmu_enable(&prcmu->per3clk_mgt);
-	u8500_prcmu_enable(&prcmu->per5clk_mgt);
-	u8500_prcmu_enable(&prcmu->per6clk_mgt);
-	u8500_prcmu_enable(&prcmu->per7clk_mgt);
-
-	u8500_prcmu_enable(&prcmu->uartclk_mgt);
-	u8500_prcmu_enable(&prcmu->i2cclk_mgt);
-
-	u8500_prcmu_enable(&prcmu->sdmmcclk_mgt);
-
-	u8500_clock_enable(1, 9, -1);	/* GPIO0 */
-
-	u8500_clock_enable(2, 11, -1);	/* GPIO1 */
-
-	u8500_clock_enable(3, 8, -1);	/* GPIO2 */
-	u8500_clock_enable(5, 1, -1);	/* GPIO3 */
-
-	u8500_clock_enable(3, 6, 6);	/* UART2 */
-
-	gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0");
-	u8500_clock_enable(3, 3, 3);	/* I2C0 */
-
-	early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000);
-	gpio_altfuncenable(GPIO_ALT_UART_2, "UART2");
-
-	early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0);
-	gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC");
-
-	early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0);
-	gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD");
-
-	u8500_clock_enable(1, 5, 5);	/* SDI0 */
-	u8500_clock_enable(2, 4, 2);	/* SDI4 */
-
-	u8500_clock_enable(6, 7, -1);	/* MTU0 */
-	u8500_clock_enable(3, 4, 4);	/* SDI2 */
-
-	early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff);
-	gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC");
-
-	/*
-	 * Enabling clocks for all devices which are AMBA devices in the
-	 * kernel.  Otherwise they will not get probe()'d because the
-	 * peripheral ID register will not be powered.
-	 */
-
-	/* XXX: some of these differ between ED/V1 */
-
-	u8500_clock_enable(1, 1, 1);	/* UART1 */
-	u8500_clock_enable(1, 0, 0);	/* UART0 */
-
-	u8500_clock_enable(3, 2, 2);	/* SSP1 */
-	u8500_clock_enable(3, 1, 1);	/* SSP0 */
-
-	u8500_clock_enable(2, 8, -1);	/* SPI0 */
-	u8500_clock_enable(2, 5, 3);	/* MSP2 */
-}
-
-#ifdef CONFIG_MMC
-static int u8500_mmci_board_init(void)
-{
-	enum gpio_error error;
-	struct gpio_register *gpio_base_address;
-
-	gpio_base_address = (void *)(U8500_GPIO_0_BASE);
-	gpio_base_address->gpio_dats |= 0xFFC0000;
-	gpio_base_address->gpio_pdis &= ~0xFFC0000;
-
-	/* save the GPIO0 AFSELA register */
-	error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC");
-	if (error != GPIO_OK) {
-		printf("u8500_mmci_board_init() gpio_altfuncenable failed\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-int board_mmc_init(bd_t *bd)
-{
-	struct pl180_mmc_host *host;
-
-	if (u8500_mmci_board_init())
-		return -ENODEV;
-
-	host = malloc(sizeof(struct pl180_mmc_host));
-	if (!host)
-		return -ENOMEM;
-	memset(host, 0, sizeof(*host));
-
-	strcpy(host->name, "MMC");
-	host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
-	host->pwr_init = INIT_PWR;
-	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN;
-	host->voltages = VOLTAGE_WINDOW_MMC;
-	host->caps = 0;
-	host->clock_in = ARM_MCLK;
-	host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
-	host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
-
-	return arm_pl180_mmci_init(host);
-}
-#endif
-
-
-/*
- * get_pll_freq_khz - return PLL frequency in kHz
- */
-static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg)
-{
-	uint32_t idf, ldf, odf, seldiv, phi;
-
-	/*
-	 * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0
-	 * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1
-	 * where:
-	 * IDF=R(2:0) (when R=000, IDF=1d)
-	 * LDF = 2*D(7:0) (D must be greater than or equal to 6)
-	 * ODF = N(5:0) (when N=000000, 0DF=1d)
-	 */
-
-	idf = (freq_reg & 0x70000) >> 16;
-	ldf = (freq_reg & 0xff) * 2;
-	odf = (freq_reg & 0x3f00) >> 8;
-	seldiv = (freq_reg & 0x01000000) >> 24;
-	phi = (inclk_khz * ldf) / (2 * odf * idf);
-	if (seldiv)
-		phi = phi/2;
-
-	return phi;
-}
-
-int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	uint32_t inclk_khz;
-	uint32_t reg, phi;
-	uint32_t clk_khz;
-	unsigned int clk_sel;
-	struct clk_mgt_regs *clks = clk_mgt_regs;
-	struct pll_freq_regs *plls = pll_freq_regs;
-
-	/*
-	 * Go through list of PLLs.
-	 * Initialise pll out frequency array (pll_khz) and print frequency.
-	 */
-	inclk_khz = 38400;	/* 38.4 MHz */
-	while (plls->addr) {
-		reg = readl(plls->addr);
-		phi = get_pll_freq_khz(inclk_khz, reg);
-		pll_khz[plls->idx] = phi;
-		printf("%s PLL out frequency: %d.%d Mhz\n",
-				pll_name[plls->idx], phi/1000, phi % 1000);
-		plls++;
-	}
-
-	/* check ARM clock source */
-	reg = readl(PRCM_ARM_CHGCLKREQ_REG);
-	printf("A9 running on %s\n",
-		(reg & 1) ?  "external clock" : "ARM PLL");
-
-	/* go through list of clk_mgt_reg */
-	printf("\n%19s %9s %7s %9s enabled\n",
-			"name(addr)", "value", "PLL", "CLK[MHz]");
-	while (clks->addr) {
-		reg = readl(clks->addr);
-
-		/* convert bit position into array index */
-		clk_sel = ffs((reg >> 5) & 0x7);	/* PLLSW[2:0] */
-
-		if (reg & 0x200)
-			clk_khz = 38400;	/* CLK38 is set */
-		else if ((reg & 0x1f) == 0)
-			/* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */
-			clk_khz = 0;
-		else
-			clk_khz = pll_khz[clk_sel] / (reg & 0x1f);
-
-		printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n",
-			clks->descr, clks->addr, reg, pll_name[clk_sel],
-			clk_khz / 1000, clk_khz % 1000,
-			(reg & 0x100) ? "ena" : "dis");
-		clks++;
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	clkinfo,	1,	1,	do_clkinfo,
-	"print clock info",
-	""
-);