summaryrefslogtreecommitdiffstats
path: root/board
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2007-03-04 01:36:05 +0100
committerWolfgang Denk <wd@denx.de>2007-03-04 01:36:05 +0100
commit647d3c3eed0da1d1505eecabe0b0fab96f956e68 (patch)
tree0a0eddcc2d78152884122cf2695bd9ebee6c4ab5 /board
parentb24444f1b3ef428b8f85974d23d4edb16e9a046f (diff)
downloadblackbird-obmc-uboot-647d3c3eed0da1d1505eecabe0b0fab96f956e68.tar.gz
blackbird-obmc-uboot-647d3c3eed0da1d1505eecabe0b0fab96f956e68.zip
Some code cleanup.
Diffstat (limited to 'board')
-rw-r--r--board/mpc7448hpc2/mpc7448hpc2.c2
-rw-r--r--board/mpc7448hpc2/tsi108_init.c24
2 files changed, 13 insertions, 13 deletions
diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c
index d4a047c1d6..63c99de175 100644
--- a/board/mpc7448hpc2/mpc7448hpc2.c
+++ b/board/mpc7448hpc2/mpc7448hpc2.c
@@ -47,7 +47,7 @@ int display_mem_map (void);
void after_reloc (ulong dest_addr)
{
DECLARE_GLOBAL_DATA_PTR;
-
+
/*
* Jump to the main U-Boot board init code
*/
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c
index e3b09cfad3..8a7efef772 100644
--- a/board/mpc7448hpc2/tsi108_init.c
+++ b/board/mpc7448hpc2/tsi108_init.c
@@ -179,7 +179,7 @@ int board_early_init_r (void)
ulong temp, i;
ulong reg_val;
volatile ulong *reg_ptr;
-
+
reg_ptr =
(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
@@ -300,7 +300,7 @@ int board_early_init_r (void)
out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
0x7C0F2000);
__asm__ __volatile__ ("sync");
-
+
/*
* Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
* value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
@@ -312,7 +312,7 @@ int board_early_init_r (void)
/* Make sure that OCN_BAR2 decoder is set (to allow following
* immediate read from SDRAM)
*/
-
+
temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
__asm__ __volatile__ ("sync");
@@ -327,11 +327,11 @@ int board_early_init_r (void)
* and enable all HLP banks and not just HLP 0 as is being done for
* Taiga Rev. 2.
*/
-
+
env_init ();
#ifndef DISABLE_PBM
-
+
/*
* For IBM processors we have to set Address-Only commands generated
* by PBM that are different from ones set after reset.
@@ -475,10 +475,10 @@ int board_early_init_r (void)
for (i = 0; i < 32; i++) {
*reg_ptr++ = reg_val; /* P2O_BAR3_LUTx */
-
+
/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
- *reg_ptr++ = 0;
-
+ *reg_ptr++ = 0;
+
/* offset = 16MB, address translation is enabled to allow byte swapping */
reg_val += 0x01000000;
}
@@ -507,7 +507,7 @@ int board_early_init_r (void)
#endif /* !DISABLE_PBM */
-#ifdef ENABLE_PCI_CSR_BAR
+#ifdef ENABLE_PCI_CSR_BAR
/* open if required access to Tsi108 CSRs from the PCI/X bus */
/* enable BAR0 on the PCI/X bus */
reg_val = in32(CFG_TSI108_CSR_BASE +
@@ -528,7 +528,7 @@ int board_early_init_r (void)
/*
* Finally enable PCI/X Bus Master and Memory Space access
*/
-
+
reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
reg_val |= 0x06;
out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
@@ -555,7 +555,7 @@ int board_early_init_r (void)
* Ensure that Machine Check exception is enabled
* We need it to support PCI Bus probing (configuration reads)
*/
-
+
reg_val = mfmsr ();
mtmsr(reg_val | MSR_ME);
@@ -631,7 +631,7 @@ int misc_init_r (void)
* thing done with regards to enabling diabling the cache.
* So this seems like a good place to print all this information
*/
-
+
printf ("CACHE: ");
switch (get_cpu_type()) {
case CPU_7447A:
OpenPOWER on IntegriCloud