rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 42 insertions, 42 deletions

diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c
index cd257df5ba..b051c89843 100644
--- a/board/xaeniax/flash.c
+++ b/board/xaeniax/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,8 +85,8 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/xaeniax/lowlevel_init.S b/board/xaeniax/lowlevel_init.S
index fe3e7128a4..57e1620050 100644
--- a/board/xaeniax/lowlevel_init.S
+++ b/board/xaeniax/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 	.macro CPWAIT reg
@@ -47,67 +47,67 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr	r0,=GPSR0
-	ldr	r1,=CFG_GPSR0_VAL
+	ldr	r1,=CONFIG_SYS_GPSR0_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPSR1
-	ldr	r1,=CFG_GPSR1_VAL
+	ldr	r1,=CONFIG_SYS_GPSR1_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPSR2
-	ldr	r1,=CFG_GPSR2_VAL
+	ldr	r1,=CONFIG_SYS_GPSR2_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPCR0
-	ldr	r1,=CFG_GPCR0_VAL
+	ldr	r1,=CONFIG_SYS_GPCR0_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPCR1
-	ldr	r1,=CFG_GPCR1_VAL
+	ldr	r1,=CONFIG_SYS_GPCR1_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPCR2
-	ldr	r1,=CFG_GPCR2_VAL
+	ldr	r1,=CONFIG_SYS_GPCR2_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPDR0
-	ldr	r1,=CFG_GPDR0_VAL
+	ldr	r1,=CONFIG_SYS_GPDR0_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPDR1
-	ldr	r1,=CFG_GPDR1_VAL
+	ldr	r1,=CONFIG_SYS_GPDR1_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPDR2
-	ldr	r1,=CFG_GPDR2_VAL
+	ldr	r1,=CONFIG_SYS_GPDR2_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR0_L
-	ldr	r1,=CFG_GAFR0_L_VAL
+	ldr	r1,=CONFIG_SYS_GAFR0_L_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR0_U
-	ldr	r1,=CFG_GAFR0_U_VAL
+	ldr	r1,=CONFIG_SYS_GAFR0_U_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR1_L
-	ldr	r1,=CFG_GAFR1_L_VAL
+	ldr	r1,=CONFIG_SYS_GAFR1_L_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR1_U
-	ldr	r1,=CFG_GAFR1_U_VAL
+	ldr	r1,=CONFIG_SYS_GAFR1_U_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR2_L
-	ldr	r1,=CFG_GAFR2_L_VAL
+	ldr	r1,=CONFIG_SYS_GAFR2_L_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR2_U
-	ldr	r1,=CFG_GAFR2_U_VAL
+	ldr	r1,=CONFIG_SYS_GAFR2_U_VAL
 	str	r1,[r0]
 
 	ldr	r0,=PSSR		/* enable GPIO pins */
-	ldr	r1,=CFG_PSSR_VAL
+	ldr	r1,=CONFIG_SYS_PSSR_VAL
 	str	r1,[r0]
 
 	/* ---------------------------------------------------------------- */
@@ -145,17 +145,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,=CFG_MSC0_VAL
+	ldr     r2,=CONFIG_SYS_MSC0_VAL
 	str     r2,[r1, #MSC0_OFFSET]
 	ldr     r2,[r1, #MSC0_OFFSET]	/* read back to ensure data latches */
 
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,=CFG_MSC1_VAL
+	ldr     r2,=CONFIG_SYS_MSC1_VAL
 	str     r2,[r1, #MSC1_OFFSET]
 	ldr     r2,[r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,=CFG_MSC2_VAL
+	ldr     r2,=CONFIG_SYS_MSC2_VAL
 	str     r2,[r1, #MSC2_OFFSET]
 	ldr     r2,[r1, #MSC2_OFFSET]
 
@@ -164,37 +164,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,=CFG_MECR_VAL
+	ldr     r2,=CONFIG_SYS_MECR_VAL
 	str     r2,[r1, #MECR_OFFSET]
 	ldr	r2,[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,=CFG_MCMEM0_VAL
+	ldr     r2,=CONFIG_SYS_MCMEM0_VAL
 	str     r2,[r1, #MCMEM0_OFFSET]
 	ldr	r2,[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,=CFG_MCMEM1_VAL
+	ldr     r2,=CONFIG_SYS_MCMEM1_VAL
 	str     r2,[r1, #MCMEM1_OFFSET]
 	ldr	r2,[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,=CFG_MCATT0_VAL
+	ldr     r2,=CONFIG_SYS_MCATT0_VAL
 	str     r2,[r1, #MCATT0_OFFSET]
 	ldr	r2,[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,=CFG_MCATT1_VAL
+	ldr     r2,=CONFIG_SYS_MCATT1_VAL
 	str     r2,[r1, #MCATT1_OFFSET]
 	ldr	r2,[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,=CFG_MCIO0_VAL
+	ldr     r2,=CONFIG_SYS_MCIO0_VAL
 	str     r2,[r1, #MCIO0_OFFSET]
 	ldr	r2,[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,=CFG_MCIO1_VAL
+	ldr     r2,=CONFIG_SYS_MCIO1_VAL
 	str     r2,[r1, #MCIO1_OFFSET]
 	ldr	r2,[r1, #MCIO1_OFFSET]
 
@@ -207,7 +207,7 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	@ get the mdrefr settings
-	ldr     r4,=CFG_MDREFR_VAL
+	ldr     r4,=CONFIG_SYS_MDREFR_VAL
 
 	@ write back mdrefr
 	str     r4,[r1, #MDREFR_OFFSET]
@@ -261,7 +261,7 @@ mem_init:
 	/* Step 4d:							*/
 	/* fetch platform value of mdcnfg				*/
 	@
-	ldr     r2,  =CFG_MDCNFG_VAL
+	ldr     r2,  =CONFIG_SYS_MDCNFG_VAL
 
 	@ disable all sdram banks
 	@
@@ -296,7 +296,7 @@ mem_init:
 	/*          documented in SDRAM data sheets. The address(es) used   */
 	/*          for this purpose must not be cacheable.                 */
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2,	[r3]
 	str	r2,	[r3]
 	str	r2,	[r3]
@@ -326,7 +326,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,	=CFG_MDMRS_VAL
+	ldr     r2,	=CONFIG_SYS_MDMRS_VAL
 	str     r2,	[r1, #MDMRS_OFFSET]
 
 
@@ -342,7 +342,7 @@ initirqs:
 	ldr     r2,  =ICLR
 	str     r1,  [r2]
 
-	ldr     r1,  =CFG_ICMR_VAL /* mask all interrupts at the controller */
+	ldr     r1,  =CONFIG_SYS_ICMR_VAL /* mask all interrupts at the controller */
 	ldr     r2,  =ICMR
 	str     r1,  [r2]
 
@@ -388,7 +388,7 @@ initclks:
 	@
 test:
 	ldr     r1,  =CKEN
-	ldr     r2,  =CFG_CKEN_VAL
+	ldr     r2,  =CONFIG_SYS_CKEN_VAL
 	str     r2,  [r1]
 
 	/* ---------------------------------------------------------------- */