S5P: Exynos: Add GPIO pin numbering and rename definitions

This patch includes following changes :
* Adds gpio pin numbering support for EXYNOS SOCs.
  To have consistent 0..n-1 GPIO numbering the banks are divided
  into different parts where ever they have holes in them.

* Rename GPIO definitions from GPIO_... to S5P_GPIO_...
  These changes were done to enable cmd_gpio for EXYNOS and
  cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence
  getting a error during compilation.

* Adds support for name to gpio conversion in s5p_gpio to enable
  gpio command EXYNOS SoCs. Function has been added to asm/gpio.h
  to decode the input gpio name to gpio number.
  Example: SMDK5420 # gpio set gpa00

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 14 insertions, 18 deletions

diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 61b9ece038..4cea63b813 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -17,8 +17,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct s5pc110_gpio *s5pc110_gpio;
-
 u32 get_board_rev(void)
 {
 	return 0;
@@ -27,8 +25,6 @@ u32 get_board_rev(void)
 int board_init(void)
 {
 	/* Set Initial global variables */
-	s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
-
 	gd->bd->bi_arch_number = MACH_TYPE_GONI;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
@@ -82,7 +78,7 @@ int board_mmc_init(bd_t *bis)
 	int i, ret, ret_sd = 0;
 
 	/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
-	s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+	gpio_direction_output(S5PC110_GPIO_J27, 1);
 
 	/*
 	 * MMC0 GPIO
@@ -91,15 +87,15 @@ int board_mmc_init(bd_t *bis)
 	 * GPG0[2]	SD_0_CDn	-> Not used
 	 * GPG0[3:6]	SD_0_DATA[0:3]
 	 */
-	for (i = 0; i < 7; i++) {
-		if (i == 2)
+	for (i = S5PC110_GPIO_G00; i < S5PC110_GPIO_G07; i++) {
+		if (i == S5PC110_GPIO_G02)
 			continue;
 		/* GPG0[0:6] special function 2 */
-		s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+		gpio_cfg_pin(i, 0x2);
 		/* GPG0[0:6] pull disable */
-		s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 		/* GPG0[0:6] drv 4x */
-		s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+		gpio_set_drv(i, S5P_GPIO_DRV_4X);
 	}
 
 	ret = s5p_mmc_init(0, 4);
@@ -110,20 +106,20 @@ int board_mmc_init(bd_t *bis)
 	 * SD card (T_FLASH) detect and init
 	 * T_FLASH_DETECT: EINT28: GPH3[4] input mode
 	 */
-	s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
-	s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
+	gpio_cfg_pin(S5PC110_GPIO_H34, S5P_GPIO_INPUT);
+	gpio_set_pull(S5PC110_GPIO_H34, S5P_GPIO_PULL_UP);
 
-	if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
-		for (i = 0; i < 7; i++) {
-			if (i == 2)
+	if (!gpio_get_value(S5PC110_GPIO_H34)) {
+		for (i = S5PC110_GPIO_G20; i < S5PC110_GPIO_G27; i++) {
+			if (i == S5PC110_GPIO_G22)
 				continue;
 
 			/* GPG2[0:6] special function 2 */
-			s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
+			gpio_cfg_pin(i, 0x2);
 			/* GPG2[0:6] pull disable */
-			s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
+			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 			/* GPG2[0:6] drv 4x */
-			s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
+			gpio_set_drv(i, S5P_GPIO_DRV_4X);
 		}
 
 		ret_sd = s5p_mmc_init(2, 4);