rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

3 files changed, 44 insertions, 44 deletions

diff --git a/board/r360mpi/flash.c b/board/r360mpi/flash.c
index 8145437b1a..45cccf712b 100644
--- a/board/r360mpi/flash.c
+++ b/board/r360mpi/flash.c
@@ -29,11 +29,11 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 #if defined(CONFIG_ENV_IS_IN_FLASH)
 # ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
 # ifndef  CONFIG_ENV_SIZE
 #  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
@@ -76,13 +76,13 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -95,19 +95,19 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	(void) flash_protect (FLAG_PROTECT_SET,
-				CFG_FLASH_BASE,
-				CFG_FLASH_BASE + monitor_flash_len - 1,
+				CONFIG_SYS_FLASH_BASE,
+				CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 				&flash_info[0]);
 #endif
 
@@ -261,10 +261,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -335,7 +335,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			    if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -472,7 +472,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
index 4fd9d1298b..85da41bd22 100644
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@@ -28,10 +28,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Configure SIUMCR to enable PCMCIA port B
@@ -132,8 +132,8 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* remove all power */
 	immap->im_ioport.iop_pcdat |= 0x0400;
@@ -164,8 +164,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
 	* and assert RESET signal
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index c51e412f46..b502e4d78c 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -105,7 +105,7 @@ static long int dram_size (long int, long int *, long int);
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -120,7 +120,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -129,10 +129,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary address - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -152,7 +152,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -160,7 +160,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
@@ -168,7 +168,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -181,7 +181,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -189,20 +189,20 @@ phys_size_t initdram (int board_type)
 	 * Final mapping
 	 */
 
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;		/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;		/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
 
 #ifdef CONFIG_CAN_DRIVER
 	/* Initialize OR3 / BR3 */
-	memctl->memc_or3 = CFG_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
-	memctl->memc_br3 = CFG_BR3_CAN;
+	memctl->memc_or3 = CONFIG_SYS_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
+	memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 
 	/* Initialize MBMR */
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 works as UPWAITB */
@@ -256,7 +256,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value,
 			   long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -268,7 +268,7 @@ static long int dram_size (long int mamr_value,
 
 void r360_i2c_lcd_write (uchar data0, uchar data1)
 {
-	if (i2c_write (CFG_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
+	if (i2c_write (CONFIG_SYS_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
 		printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1);
 	}
 }
@@ -292,9 +292,9 @@ int misc_init_r (void)
 	char *str;
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
+	i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
 
 	for (i = 0; i < KEYBD_DATALEN; ++i) {
 		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
@@ -397,10 +397,10 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	uchar keybd_env[2 * KEYBD_DATALEN + 1];
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/* Read keys */
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
+	i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
 
 	puts ("Keys:");
 	for (i = 0; i < KEYBD_DATALEN; ++i) {