powerpc: 74xx_7xx: remove 74xx_7xx cpu support

All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>

1 files changed, 0 insertions, 494 deletions

diff --git a/board/ppmc7xx/flash.c b/board/ppmc7xx/flash.c
deleted file mode 100644
index e7242271dd..0000000000
--- a/board/ppmc7xx/flash.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * flash.c
- * -------
- *
- * Flash programming routines for the Wind River PPMC 74xx/7xx
- * based on flash.c from the TQM8260 board.
- *
- * By Richard Danter (richard.danter@windriver.com)
- * Copyright (C) 2005 Wind River Systems
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <74xx_7xx.h>
-
-#define DWORD unsigned long long
-
-/* Local function prototypes */
-static int	write_dword (flash_info_t* info, ulong dest, unsigned char *pdata);
-static void	write_via_fpu (volatile DWORD* addr, DWORD* data);
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
-	unsigned long msr;
-	DWORD cmd_reset = 0x00F000F000F000F0LL;
-
-	if (flash_info[0].flash_id != FLASH_UNKNOWN) {
-		msr = get_msr ();
-		set_msr (msr | MSR_FP);
-
-		write_via_fpu ((DWORD*)flash_info[0].start[0], &cmd_reset );
-
-		set_msr (msr);
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
-	int i;
-	unsigned long msr;
-	DWORD flashtest;
-	DWORD cmd_select[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
-							0x0090009000900090LL };
-
-	/* Enable FPU */
-	msr = get_msr ();
-	set_msr (msr | MSR_FP);
-
-	/* Write auto-select command sequence */
-	write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[0] );
-	write_via_fpu ((DWORD*)(baseaddr + (0x02AA << 3)), &cmd_select[1] );
-	write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[2] );
-
-	/* Restore FPU */
-	set_msr (msr);
-
-	/* Read manufacturer ID */
-	flashtest = *(volatile DWORD*)baseaddr;
-	switch ((int)flashtest) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		/* No, faulty or unknown flash */
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);
-	}
-
-	/* Read device ID */
-	flashtest = *(volatile DWORD*)(baseaddr + 8);
-	switch ((long)flashtest) {
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00400000;
-		break;
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00400000;
-		break;
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00800000;
-		break;
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00800000;
-		break;
-	case AMD_ID_DL322T:
-		info->flash_id += FLASH_AMDL322T;
-		info->sector_count = 71;
-		info->size = 0x01000000;
-		break;
-	case AMD_ID_DL322B:
-		info->flash_id += FLASH_AMDL322B;
-		info->sector_count = 71;
-		info->size = 0x01000000;
-		break;
-	case AMD_ID_DL323T:
-		info->flash_id += FLASH_AMDL323T;
-		info->sector_count = 71;
-		info->size = 0x01000000;
-		break;
-	case AMD_ID_DL323B:
-		info->flash_id += FLASH_AMDL323B;
-		info->sector_count = 71;
-		info->size = 0x01000000;
-		break;
-	case AMD_ID_LV640U:
-		info->flash_id += FLASH_AM640U;
-		info->sector_count = 128;
-		info->size = 0x02000000;
-		break;
-	default:
-		/* Unknown flash type */
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);
-	}
-
-	if ((long)flashtest == AMD_ID_LV640U) {
-		/* set up sector start adress table (uniform sector type) */
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = baseaddr + (i * 0x00040000);
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set up sector start adress table (bottom sector type) */
-		info->start[0] = baseaddr + 0x00000000;
-		info->start[1] = baseaddr + 0x00010000;
-		info->start[2] = baseaddr + 0x00018000;
-		info->start[3] = baseaddr + 0x00020000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
-		}
-	} else {
-		/* set up sector start adress table (top sector type) */
-		i = info->sector_count - 1;
-		info->start[i--] = baseaddr + info->size - 0x00010000;
-		info->start[i--] = baseaddr + info->size - 0x00018000;
-		info->start[i--] = baseaddr + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = baseaddr + i * 0x00040000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		if (*(volatile DWORD*)(info->start[i] + 16) & 0x0001000100010001LL) {
-			info->protect[i] = 1;	/* D0 = 1 if protected */
-		} else {
-			info->protect[i] = 0;
-		}
-	}
-
-	flash_reset ();
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 = 0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here (only one bank) */
-	size_b0 = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-				size_b0, size_b0 >> 20);
-	}
-
-	/*
-	 * protect monitor and environment sectors
-	 */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_MONITOR_BASE,
-		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR,
-		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf ("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf ("FUJITSU ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM800T:
-		printf ("29LV800T (8 M, top sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf ("29LV800T (8 M, bottom sector)\n");
-		break;
-	case FLASH_AM160T:
-		printf ("29LV160T (16 M, top sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf ("29LV160B (16 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL322T:
-		printf ("29DL322T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL322B:
-		printf ("29DL322B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL323T:
-		printf ("29DL323T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL323B:
-		printf ("29DL323B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AM640U:
-		printf ("29LV640D (64 M, uniform sector)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-	unsigned long msr;
-	DWORD cmd_erase[6] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
-						   0x0080008000800080LL, 0x00AA00AA00AA00AALL,
-						   0x0055005500550055LL, 0x0030003000300030LL };
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Enable FPU */
-	msr = get_msr();
-	set_msr ( msr | MSR_FP );
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[0] );
-	write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_erase[1] );
-	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[2] );
-	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[3] );
-	write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_erase[4] );
-	udelay (1000);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			write_via_fpu ((DWORD*)info->start[sect], &cmd_erase[5] );
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* Restore FPU */
-	set_msr (msr);
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last = start;
-	while ((*(volatile DWORD*)info->start[l_sect] & 0x0080008000800080LL )
-				!= 0x0080008000800080LL )
-	{
-		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-  DONE:
-	/* reset to read mode */
-	flash_reset ();
-
-	printf (" done\n");
-	return 0;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong dp;
-	static unsigned char bb[8];
-	int i, l, rc, cc = cnt;
-
-	dp = (addr & ~7);		/* get lower dword aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - dp) != 0) {
-		for (i = 0; i < 8; i++)
-			bb[i] = (i < l || (i - l) >= cc) ? *(char*)(dp + i) : *src++;
-		if ((rc = write_dword (info, dp, bb)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		cc -= 8 - l;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cc >= 8) {
-		if ((rc = write_dword (info, dp, src)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		src += 8;
-		cc -= 8;
-	}
-
-	if (cc <= 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	for (i = 0; i < 8; i++) {
-		bb[i] = (i < cc) ? *src++ : *(char*)(dp + i);
-	}
-	return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
-	ulong start;
-	unsigned long msr;
-	int flag, i;
-	DWORD data;
-	DWORD cmd_write[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
-						   0x00A000A000A000A0LL };
-
-	for (data = 0, i = 0; i < 8; i++)
-		data = (data << 8) + *pdata++;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*(DWORD*)dest & data) != data) {
-		return (2);
-	}
-
-	/* Enable FPU */
-	msr = get_msr();
-	set_msr( msr | MSR_FP );
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_write[0] );
-	write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_write[1] );
-	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_write[2] );
-	write_via_fpu ((DWORD*)dest, &data );
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* Restore FPU */
-	set_msr(msr);
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while (*(volatile DWORD*)dest != data ) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void write_via_fpu (volatile DWORD* addr, DWORD* data)
-{
-	__asm__ __volatile__ ("lfd  1, 0(%0)"::"r" (data));
-	__asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
-	__asm__ __volatile__ ("eieio");
-}