summaryrefslogtreecommitdiffstats
path: root/board/nvidia/seaboard/seaboard.c
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2011-10-31 06:51:36 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-12-09 17:30:08 +0100
commit9877841f6bba3723f5d21cc58eb99f3417e90725 (patch)
treef49cfd7af63e74b3e02cafbbf95e2d484e39dddc /board/nvidia/seaboard/seaboard.c
parentae03661fda98465420016b410a27e6bf2a3c03f4 (diff)
downloadblackbird-obmc-uboot-9877841f6bba3723f5d21cc58eb99f3417e90725.tar.gz
blackbird-obmc-uboot-9877841f6bba3723f5d21cc58eb99f3417e90725.zip
tegra2: Modify MMC driver to handle power and cd GPIOs
Pass the GPIO numbers for power and card detect to tegra2_mmc_init(), and modify that function to perform all required GPIO initialization. This removes the need for board files to perform these operations. Move board_mmc_getcd() into tegra2_mmc.c now that the driver knows which GPIOs to use. Update affected call-sites in seaboard.c and harmony.c. Note that this change should make all SD ports work on Harmony, since the required GPIO setup is now being performed. v4: Fix prototype of tegra2_mmc_init() in board.h to match driver change. Remove prototype of gpio_config_mmc() from board.h Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Andy Fleming <afleming@gmail.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/seaboard/seaboard.c')
-rw-r--r--board/nvidia/seaboard/seaboard.c33
1 files changed, 2 insertions, 31 deletions
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 22a0e69f06..356d616ab1 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -87,19 +87,6 @@ static void pin_mux_mmc(void)
pinmux_tristate_disable(PINGRP_ATC);
}
-/*
- * Routine: gpio_config_mmc
- * Description: Set GPIOs for SDMMC3 SDIO slot.
- */
-void gpio_config_mmc(void)
-{
- /* Set EN_VDDIO_SD (GPIO I6) */
- gpio_direction_output(GPIO_PI6, 1);
-
- /* Config pin as GPI for Card Detect (GPIO I5) */
- gpio_direction_input(GPIO_PI5);
-}
-
/* this is a weak define that we are overriding */
int board_mmc_init(bd_t *bd)
{
@@ -107,31 +94,15 @@ int board_mmc_init(bd_t *bd)
/* Enable muxes, etc. for SDMMC controllers */
pin_mux_mmc();
- gpio_config_mmc();
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra2_mmc_init(0, 4);
+ tegra2_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 1, SD slot, with 4-bit bus */
- tegra2_mmc_init(1, 4);
-
- return 0;
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
-{
- debug("board_mmc_getcd called\n");
- *cd = 1; /* Assume card is inserted, or eMMC */
-
- if (IS_SD(mmc)) {
- /* Seaboard SDMMC3 = SDIO3_CD = GPIO_PI5 */
- if (gpio_get_value(GPIO_PI5))
- *cd = 0;
- }
+ tegra2_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
return 0;
}
OpenPOWER on IntegriCloud