summaryrefslogtreecommitdiffstats
path: root/board/logicpd/omap3som/omap3logic.c
diff options
context:
space:
mode:
authorAdam Ford <aford173@gmail.com>2016-01-29 20:12:34 -0600
committerTom Rini <trini@konsulko.com>2016-02-08 10:10:39 -0500
commit49c7303f0e526d46f8d16c5556963faf47c59d35 (patch)
treec475a37013d191b3688d9f58ec90375cc280bfab /board/logicpd/omap3som/omap3logic.c
parent7443a9c40568179492af453841fbecc69d08071b (diff)
downloadblackbird-obmc-uboot-49c7303f0e526d46f8d16c5556963faf47c59d35.tar.gz
blackbird-obmc-uboot-49c7303f0e526d46f8d16c5556963faf47c59d35.zip
OMAP3: Enable SPL on omap3_logic
Previously, Omap3_logic assumed X-loader was present. With this patch, we can finally replace X-loader with an MLO generated by U-Boot. This requires ECC to be setup to match the Linux Kernel and the PBIAS confgured for the SD card. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/logicpd/omap3som/omap3logic.c')
-rw-r--r--board/logicpd/omap3som/omap3logic.c56
1 files changed, 56 insertions, 0 deletions
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index b86da5a5d1..27ea4bbe4f 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -26,10 +26,15 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
+#include <linux/mtd/nand.h>
#include "omap3logic.h"
DECLARE_GLOBAL_DATA_PTR;
+#define CONTROL_WKUP_CTRL 0x48002a5c
+#define GPIO_IO_PWRDNZ (1 << 6)
+#define PBIASLITEVMODE1 (1 << 8)
+
/*
* two dimensional array of strucures containining board name and Linux
* machine IDs; row it selected based on CPU column is slected based
@@ -73,6 +78,57 @@ static struct board_id {
},
};
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank. This
+ * provides the timing values back to the function that configures
+ * the memory.
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+ timings->mr = MICRON_V_MR_165;
+ /* 256MB DDR */
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+}
+#endif
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+ t2_t *t2_base = (t2_t *)T2_BASE;
+ u32 pbias_lite;
+ /* set up dual-voltage GPIOs to 1.8V */
+ pbias_lite = readl(&t2_base->pbias_lite);
+ pbias_lite &= ~PBIASLITEVMODE1;
+ pbias_lite |= PBIASLITEPWRDNZ1;
+ writel(pbias_lite, &t2_base->pbias_lite);
+ if (get_cpu_family() == CPU_OMAP36XX)
+ writel(readl(CONTROL_WKUP_CTRL) | GPIO_IO_PWRDNZ,
+ CONTROL_WKUP_CTRL);
+ twl4030_power_init();
+
+ omap_die_id_display();
+ putc('\n');
+
+ return 0;
+}
+
/*
* BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
*/
OpenPOWER on IntegriCloud