summaryrefslogtreecommitdiffstats
path: root/board/keymile
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-02-17 14:22:02 -0500
committerTom Rini <trini@ti.com>2014-02-17 14:22:02 -0500
commitc4d376fd1c2bce8d64cec0431dd3f24957b6dec4 (patch)
treede17e3a67fa4a48f3b9571bff2399cb0a24558bc /board/keymile
parentb1ad03c242dae3712b9be66026f5d8c6f919c00b (diff)
parent5e77a745b24d9b98aa635293972f04fd6f0c6b38 (diff)
downloadblackbird-obmc-uboot-c4d376fd1c2bce8d64cec0431dd3f24957b6dec4.tar.gz
blackbird-obmc-uboot-c4d376fd1c2bce8d64cec0431dd3f24957b6dec4.zip
Merge branch 'master' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'board/keymile')
-rw-r--r--board/keymile/km_arm/fpga_config.c26
-rw-r--r--board/keymile/km_arm/km_arm.c20
-rw-r--r--board/keymile/scripts/develop-arm.txt1
-rw-r--r--board/keymile/scripts/develop-common.txt1
-rw-r--r--board/keymile/scripts/develop-ppc_82xx.txt1
-rw-r--r--board/keymile/scripts/develop-ppc_8xx.txt1
-rw-r--r--board/keymile/scripts/ramfs-arm.txt1
-rw-r--r--board/keymile/scripts/ramfs-common.txt1
-rw-r--r--board/keymile/scripts/ramfs-ppc_82xx.txt1
-rw-r--r--board/keymile/scripts/ramfs-ppc_8xx.txt1
10 files changed, 38 insertions, 16 deletions
diff --git a/board/keymile/km_arm/fpga_config.c b/board/keymile/km_arm/fpga_config.c
index cbfc7d2175..51a3cfe647 100644
--- a/board/keymile/km_arm/fpga_config.c
+++ b/board/keymile/km_arm/fpga_config.c
@@ -189,6 +189,31 @@ int wait_for_fpga_config(void)
return 0;
}
+#if defined(KM_PCIE_RESET_MPP7)
+
+#define KM_PEX_RST_GPIO_PIN 7
+int fpga_reset(void)
+{
+ if (!check_boco2()) {
+ /* we do not have BOCO2, this is not really used */
+ return 0;
+ }
+
+ printf("PCIe reset through GPIO7: ");
+ /* apply PCIe reset via GPIO */
+ kw_gpio_set_valid(KM_PEX_RST_GPIO_PIN, 1);
+ kw_gpio_direction_output(KM_PEX_RST_GPIO_PIN, 1);
+ kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 0);
+ udelay(1000*10);
+ kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 1);
+
+ printf(" done\n");
+
+ return 0;
+}
+
+#else
+
#define PRST1 0x4
#define PCIE_RST 0x10
#define TRAFFIC_RST 0x04
@@ -219,6 +244,7 @@ int fpga_reset(void)
return 0;
}
+#endif
/* the FPGA was configured, we configure the BOCO2 so that the EEPROM
* is available from the Bobcat SPI bus */
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 5620737bf0..35402c800b 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -46,7 +46,11 @@ static const u32 kwmpp_config[] = {
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
+#if defined(KM_PCIE_RESET_MPP7)
+ MPP7_GPO,
+#else
MPP7_PEX_RST_OUTn,
+#endif
#if defined(CONFIG_SYS_I2C_SOFT)
MPP8_GPIO, /* SDA */
MPP9_GPIO, /* SCL */
@@ -102,7 +106,7 @@ static const u32 kwmpp_config[] = {
/*
* Wait for startup OK from mgcoge3ne
*/
-int startup_allowed(void)
+static int startup_allowed(void)
{
unsigned char buf;
@@ -164,7 +168,6 @@ static int initialize_unit_leds(void)
return 0;
}
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
static void set_bootcount_addr(void)
{
uchar buf[32];
@@ -173,7 +176,6 @@ static void set_bootcount_addr(void)
sprintf((char *)buf, "0x%x", bootcountaddr);
setenv("bootcountaddr", (char *)buf);
}
-#endif
int misc_init_r(void)
{
@@ -210,9 +212,7 @@ int misc_init_r(void)
initialize_unit_leds();
set_km_env();
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
set_bootcount_addr();
-#endif
return 0;
}
@@ -322,15 +322,15 @@ void reset_phy(void)
return;
/* RGMII clk transition on data stable */
- if (!miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, &reg))
+ if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, &reg))
printf("Error reading PHY spec ctrl reg\n");
- if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG,
- reg | PHY_RGMII_CLK_STABLE | PHY_CLSA))
+ if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG,
+ reg | PHY_RGMII_CLK_STABLE | PHY_CLSA))
printf("Error writing PHY spec ctrl reg\n");
/* leds setup */
- if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG,
- PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT))
+ if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG,
+ PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT))
printf("Error writing PHY LED reg\n");
/* reset the phy */
diff --git a/board/keymile/scripts/develop-arm.txt b/board/keymile/scripts/develop-arm.txt
index 922afea277..d3c974f1f9 100644
--- a/board/keymile/scripts/develop-arm.txt
+++ b/board/keymile/scripts/develop-arm.txt
@@ -1,2 +1 @@
setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
-tftpfdt=true
diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt
index a6bb1b1d4a..a80812a5d0 100644
--- a/board/keymile/scripts/develop-common.txt
+++ b/board/keymile/scripts/develop-common.txt
@@ -3,6 +3,7 @@ bootcmd=run ${subbootcmds}
configure=run set_uimage; km_setboardid && saveenv && reset
subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
+tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi
tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
toolchain=/opt/eldk
rootfssize=0
diff --git a/board/keymile/scripts/develop-ppc_82xx.txt b/board/keymile/scripts/develop-ppc_82xx.txt
index 909f6a3cee..d3c974f1f9 100644
--- a/board/keymile/scripts/develop-ppc_82xx.txt
+++ b/board/keymile/scripts/develop-ppc_82xx.txt
@@ -1,2 +1 @@
setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
-tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb
diff --git a/board/keymile/scripts/develop-ppc_8xx.txt b/board/keymile/scripts/develop-ppc_8xx.txt
index 909f6a3cee..d3c974f1f9 100644
--- a/board/keymile/scripts/develop-ppc_8xx.txt
+++ b/board/keymile/scripts/develop-ppc_8xx.txt
@@ -1,2 +1 @@
setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
-tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb
diff --git a/board/keymile/scripts/ramfs-arm.txt b/board/keymile/scripts/ramfs-arm.txt
index 79974f1b70..87e984e179 100644
--- a/board/keymile/scripts/ramfs-arm.txt
+++ b/board/keymile/scripts/ramfs-arm.txt
@@ -1,2 +1 @@
setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
-tftpfdt=true
diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt
index 502c8631f4..d79ad2e21b 100644
--- a/board/keymile/scripts/ramfs-common.txt
+++ b/board/keymile/scripts/ramfs-common.txt
@@ -7,6 +7,7 @@ nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
configure=run set_uimage; km_setboardid && saveenv && reset
rootfsfile=${hostname}/rootfsImage
setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
+tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi
tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage
set_uimage=printenv uimage || setenv uimage uImage
diff --git a/board/keymile/scripts/ramfs-ppc_82xx.txt b/board/keymile/scripts/ramfs-ppc_82xx.txt
index 970927a2fa..87e984e179 100644
--- a/board/keymile/scripts/ramfs-ppc_82xx.txt
+++ b/board/keymile/scripts/ramfs-ppc_82xx.txt
@@ -1,2 +1 @@
setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
-tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb
diff --git a/board/keymile/scripts/ramfs-ppc_8xx.txt b/board/keymile/scripts/ramfs-ppc_8xx.txt
index 970927a2fa..87e984e179 100644
--- a/board/keymile/scripts/ramfs-ppc_8xx.txt
+++ b/board/keymile/scripts/ramfs-ppc_8xx.txt
@@ -1,2 +1 @@
setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
-tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb
OpenPOWER on IntegriCloud