arm: Remove tt01 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 290 deletions

diff --git a/board/hale/tt01/Kconfig b/board/hale/tt01/Kconfig
deleted file mode 100644
index af9828a4bf..0000000000
--- a/board/hale/tt01/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_TT01
-
-config SYS_BOARD
-	default "tt01"
-
-config SYS_VENDOR
-	default "hale"
-
-config SYS_SOC
-	default "mx31"
-
-config SYS_CONFIG_NAME
-	default "tt01"
-
-endif
diff --git a/board/hale/tt01/MAINTAINERS b/board/hale/tt01/MAINTAINERS
deleted file mode 100644
index 2f582be8f3..0000000000
--- a/board/hale/tt01/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TT01 BOARD
-M:	Helmut Raiger <helmut.raiger@hale.at>
-S:	Maintained
-F:	board/hale/tt01/
-F:	include/configs/tt01.h
-F:	configs/tt01_defconfig
diff --git a/board/hale/tt01/Makefile b/board/hale/tt01/Makefile
deleted file mode 100644
index e06a040422..0000000000
--- a/board/hale/tt01/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2009 HALE electronic <helmut.raiger@hale.at>
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= tt01.o
-obj-y	+= lowlevel_init.o
diff --git a/board/hale/tt01/lowlevel_init.S b/board/hale/tt01/lowlevel_init.S
deleted file mode 100644
index 54132a18fb..0000000000
--- a/board/hale/tt01/lowlevel_init.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
- * (C) Copyright 2011 Helmut Raiger <helmut.raiger@hale.at>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <config.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/macro.h>
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Also setup the Peripheral Port Remap register inside the core */
-	ldr	r0, =ARM_PPMRR      /* start from AIPS 2GB region */
-	mcr	p15, 0, r0, c15, c2, 4
-	mov	pc, lr
diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c
deleted file mode 100644
index 011aed0841..0000000000
--- a/board/hale/tt01/tt01.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at>
- * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <command.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <mc13783.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BOARD_STRING	"Board: HALE TT-01"
-
-/* Clock configuration */
-#define CCM_CCMR_SETUP		0x074B0BF5
-
-static void board_setup_clocks(void)
-{
-	struct clock_control_regs *ccm = (struct clock_control_regs *) CCM_BASE;
-	volatile int wait = 0x10000;
-
-	writel(CCM_CCMR_SETUP, &ccm->ccmr);
-	while (wait--)
-		;
-
-	writel(CCM_CCMR_SETUP | CCMR_MPE, &ccm->ccmr);
-	writel((CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS, &ccm->ccmr);
-
-	/* Set up clock to 532MHz */
-	writel(PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) |
-			PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) |
-			PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) |
-			PDR0_MCU_PODF(0), &ccm->pdr0);
-	writel(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | PLL_MFN(12),
-			&ccm->mpctl);
-	writel(PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1),
-			&ccm->spctl);
-}
-
-/* DRAM configuration */
-
-#define ESDMISC_MDDR_SETUP	0x00000004
-#define ESDMISC_MDDR_RESET_DL	0x0000000c
-/*
- * decoding magic 0x6ac73a = 0b 0110 1010   1100 0111   0011 1010 below:
- *   tXP = 11, tWTR = 0, tRP = 10, tMRD = 10
- *   tWR = 1, tRAS = 100, tRRD = 01, tCAS = 11
- *   tRCD = 011, tRC = 010
- *  note: all but tWTR (1), tRC (111) are reset defaults,
- *     the same values work in the jtag configuration
- *
- *  Bluetechnix setup has 0x75e73a (for 128MB) =
- *			0b 0111 0101   1110 0111   0011 1010
- *   tXP = 11, tWTR = 1, tRP = 01, tMRD = 01
- *   tWR = 1, tRAS = 110, tRRD = 01, tCAS = 11
- *   tRCD = 011, tRC = 010
- */
-#define ESDCFG0_MDDR_SETUP	0x006ac73a
-#define ESDCTL_ROW_COL		(ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
-#define ESDCTL_SETTINGS		(ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
-				 ESDCTL_DSIZ(2) | ESDCTL_BL(1))
-#define ESDCTL_PRECHARGE	(ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
-#define ESDCTL_AUTOREFRESH	(ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
-#define ESDCTL_LOADMODEREG	(ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
-#define ESDCTL_RW		ESDCTL_SETTINGS
-
-static void board_setup_sdram(void)
-{
-	u32 *pad;
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
-	/*
-	 * setup pad control for the controller pins
-	 * no loopback, no pull, no keeper, no open drain,
-	 * standard input, standard drive, slow slew rate
-	 */
-	for (pad = (u32 *) IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B;
-			pad <= (u32 *) IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0; pad++)
-		*pad = 0;
-
-	/* set up MX31 DDR Memory Controller */
-	writel(ESDMISC_MDDR_SETUP, &esdc->misc);
-	writel(ESDCFG0_MDDR_SETUP, &esdc->cfg0);
-
-	/* perform DDR init sequence for CSD0 */
-	writel(ESDCTL_PRECHARGE, &esdc->ctl0);
-	writel(0x12344321, CSD0_BASE+0x0f00);
-	writel(ESDCTL_AUTOREFRESH, &esdc->ctl0);
-	writel(0x12344321, CSD0_BASE);
-	writel(0x12344321, CSD0_BASE);
-	writel(ESDCTL_LOADMODEREG, &esdc->ctl0);
-	writeb(0xda, CSD0_BASE+0x33);
-	writeb(0xff, CSD0_BASE+0x1000000);
-	writel(ESDCTL_RW, &esdc->ctl0);
-	writel(0xDEADBEEF, CSD0_BASE);
-	writel(ESDMISC_MDDR_RESET_DL, &esdc->misc);
-}
-
-static void tt01_spi3_hw_init(void)
-{
-	/* CSPI3 */
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MISO, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MOSI, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_SCLK, MUX_CTL_FUNC));
-	/* CSPI3, SS0 = Atlas */
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_ALT1));
-
-	/* start CSPI3 clock (3 = always on except if PLL off) */
-	setbits_le32(CCM_CGR0, 3 << 16);
-}
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE,
-			PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	/* CS4: FPGA incl. network controller */
-	struct mxc_weimcs cs4 = {
-		/*    sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
-		CSCR_U(0, 0,  0,  0,  0,  0,   0,  0,  3, 28, 1,  7,  6),
-		/*   oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
-		CSCR_L(4,  4,   4,  10,  4,  0,  5,  4,  0,  0,   0,   1),
-		/*  ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
-		CSCR_A(4,   4,  4,  4,  0,  1,  4,  3,  0,  0,  0,  0,  1,   0)
-	};
-
-	/* this seems essential, won't start without, but why? */
-	writel(IPU_CONF_DI_EN, (u32 *) IPU_CONF);
-
-	board_setup_clocks();
-	board_setup_sdram();
-	mxc_setup_weimcs(4, &cs4);
-
-	/* Setup UART2 and SPI3 pins */
-	mx31_uart2_hw_init();
-	tt01_spi3_hw_init();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-	return 0;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_HW_WATCHDOG
-	hw_watchdog_init();
-#endif
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts(BOARD_STRING "\n");
-	return 0;
-}
-
-#ifdef CONFIG_MXC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	u32 val;
-	struct pmic *p;
-	int ret;
-
-	/*
-	* this is the first driver to use the pmic, so call
-	* pmic_init() here. board_late_init() is too late for
-	* the MMC driver.
-	*/
-
-	ret = pmic_init(I2C_PMIC);
-	if (ret)
-		return ret;
-
-	p = pmic_get("FSL_PMIC");
-	if (!p)
-		return -ENODEV;
-
-	/* configure pins for SDHC1 only */
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CMD, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA0, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA1, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA2, MUX_CTL_FUNC));
-	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA3, MUX_CTL_FUNC));
-
-	/* turn on power V_MMC1 */
-	if (pmic_reg_read(p, REG_MODE_1, &val) < 0)
-		pmic_reg_write(p, REG_MODE_1, val | VMMC1EN);
-
-	return mxc_mmc_init(bis);
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-void video_get_info_str(int line_number, char *info)
-{
-	u32 srev = get_cpu_rev();
-
-	switch (line_number) {
-	case 2:
-		sprintf(info, " CPU  : Freescale i.MX31 rev %d.%d%s at %d MHz",
-			(srev & 0xF0) >> 4, (srev & 0x0F),
-			((srev & 0x8000) ? " unknown" : ""),
-		mxc_get_clock(MXC_ARM_CLK) / 1000000);
-		break;
-	case 3:
-		strcpy(info, " " BOARD_STRING);
-		break;
-	default:
-		info[0] = 0;
-	}
-}
-#endif