diff options
| author | Tim Harvey <tharvey@gateworks.com> | 2016-05-24 11:03:53 -0700 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-05-31 17:25:02 +0200 |
| commit | 78532623303e089e7d36b3a11d293e618b927655 (patch) | |
| tree | e11daa87ee5bb4206935c3347cf771860cf8c7c6 /board/gateworks | |
| parent | ca628b74c97f3a6620e6f18aad5f917d51c2cdda (diff) | |
| download | blackbird-obmc-uboot-78532623303e089e7d36b3a11d293e618b927655.tar.gz blackbird-obmc-uboot-78532623303e089e7d36b3a11d293e618b927655.zip | |
imx: ventana: export backlight gpio after gpio driver is available
Calling request_gpio to register bklt_gpio with the GPIO driver had no effect
in setup_display called from early board init (although pinmuxing it and
configuring it as output-low does do what it should). Therefore move the
request_gpio later in enable_lvds so that its registered for use by the
gpio command if LVDS is actually enabled.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Diffstat (limited to 'board/gateworks')
| -rw-r--r-- | board/gateworks/gw_ventana/gw_ventana.c | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 3b7c82b1dc..7a3d96a039 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -317,6 +317,8 @@ static void enable_lvds(struct display_info_t const *dev) writel(reg, &iomux->gpr[2]); /* Enable Backlight */ + gpio_request(IMX_GPIO_NR(1, 10), "bklt_gpio"); + gpio_direction_output(IMX_GPIO_NR(1, 10), 0); gpio_request(IMX_GPIO_NR(1, 18), "bklt_en"); SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG); gpio_direction_output(IMX_GPIO_NR(1, 18), 1); @@ -456,8 +458,7 @@ static void setup_display(void) <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); writel(reg, &iomux->gpr[3]); - /* Backlight CABEN on LVDS connector */ - gpio_request(IMX_GPIO_NR(1, 10), "bklt_gpio"); + /* LVDS Backlight GPIO on LVDS connector - output low */ SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG); gpio_direction_output(IMX_GPIO_NR(1, 10), 0); } |
