summaryrefslogtreecommitdiffstats
path: root/board/g2000
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2008-06-02 17:37:28 +0200
committerStefan Roese <sr@denx.de>2008-06-03 20:22:19 +0200
commitbbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a (patch)
tree48f48eadf87f5bc67d2673b7f1ba58a77e882dc2 /board/g2000
parent192f90e272b3989ee7b4a666d1fdab831f20f8d2 (diff)
downloadblackbird-obmc-uboot-bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a.tar.gz
blackbird-obmc-uboot-bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a.zip
ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/g2000')
-rw-r--r--board/g2000/g2000.c35
1 files changed, 0 insertions, 35 deletions
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index 2dfd87c78e..9fcab74849 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -149,41 +149,6 @@ long int initdram (int board_type)
}
-#if 1 /* test-only */
-void sdram_init(void)
-{
- init_sdram_static_settings();
-}
-#endif
-
-
-#if 0 /* test-only */
-long int initdram (int board_type)
-{
- unsigned long val;
-
- mtdcr(memcfga, mem_mb0cf);
- val = mfdcr(memcfgd);
-
-#if 0
- printf("\nmb0cf=%x\n", val); /* test-only */
- printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
- return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-#endif
-
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: 16 MB - ok\n");
-
- return (0);
-}
-
-
#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
OpenPOWER on IntegriCloud