summaryrefslogtreecommitdiffstats
path: root/board/freescale
diff options
context:
space:
mode:
authorYork Sun <yorksun@freescale.com>2014-09-11 13:32:07 -0700
committerYork Sun <yorksun@freescale.com>2014-09-25 09:12:12 -0700
commitc7eae7fcb11bc7dab519fca8d8902f1fbc5c3c76 (patch)
tree1a521d509a9752c0f279416c7d54c98c1d854068 /board/freescale
parentf80d6472b47e73e35e4eaed6fc56ce5df2c82cdb (diff)
downloadblackbird-obmc-uboot-c7eae7fcb11bc7dab519fca8d8902f1fbc5c3c76.tar.gz
blackbird-obmc-uboot-c7eae7fcb11bc7dab519fca8d8902f1fbc5c3c76.zip
board/ls1021aqds: Add DDR4 support
LS1021AQDS has a variant with DDR4 slot. This patch adds a new defconfig for this variant to enable DDR4 support. RAW timing parameters are not added for DDR4. The board timing parameters are only tuned for single- rank 1600 and 1800MT/s with Micron DIMM 9ASF51272AZ-2G1A1 due to DIMM availability. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/ls1021aqds/MAINTAINERS1
-rw-r--r--board/freescale/ls1021aqds/ddr.c9
-rw-r--r--board/freescale/ls1021aqds/ddr.h10
3 files changed, 19 insertions, 1 deletions
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index 021d82b74d..ccf45131b8 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -4,3 +4,4 @@ S: Maintained
F: board/freescale/ls1021aqds/
F: include/configs/ls1021aqds.h
F: configs/ls1021aqds_nor_defconfig
+F: configs/ls1021aqds_ddr4_nor_defconfig
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index 679c654fb5..5898e33744 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -79,7 +79,6 @@ found:
*/
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0xf;
- popts->cswl_override = DDR_CSWL_CS0;
/*
* Rtt and Rtt_WR override
@@ -89,9 +88,17 @@ found:
/* Enable ZQ calibration */
popts->zq_en = 1;
+#ifdef CONFIG_SYS_FSL_DDR4
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+ DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
+#else
+ popts->cswl_override = DDR_CSWL_CS0;
+
/* DHC_EN =1, ODT = 75 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+#endif
}
#ifdef CONFIG_SYS_DDR_RAW_TIMING
diff --git a/board/freescale/ls1021aqds/ddr.h b/board/freescale/ls1021aqds/ddr.h
index 16d87cbe82..f819c99dba 100644
--- a/board/freescale/ls1021aqds/ddr.h
+++ b/board/freescale/ls1021aqds/ddr.h
@@ -30,6 +30,13 @@ static const struct board_specific_parameters udimm0[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
*/
+#ifdef CONFIG_SYS_FSL_DDR4
+ {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
+ {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,},
+ {1, 1666, 0, 4, 8, 0x090A0B0B, 0x0C0D0E0C,},
+ {1, 1900, 0, 4, 9, 0x0A0B0C0B, 0x0D0E0F0D,},
+ {1, 2200, 0, 4, 10, 0x0B0C0D0C, 0x0E0F110E,},
+#elif defined(CONFIG_SYS_FSL_DDR3)
{1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
{1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
{1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
@@ -39,6 +46,9 @@ static const struct board_specific_parameters udimm0[] = {
{2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
{2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
{2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
+#else
+#error DDR type not defined
+#endif
{}
};
OpenPOWER on IntegriCloud