summaryrefslogtreecommitdiffstats
path: root/board/freescale
diff options
context:
space:
mode:
authorBin Meng <bmeng.cn@gmail.com>2016-02-05 19:30:11 -0800
committerAnatolij Gustschin <agust@denx.de>2016-02-06 12:00:59 +0100
commita187559e3d586891c917279044c5386d1b2adc6e (patch)
tree8d50525d0381f28cd41f86e6d8f42ad47d26063e /board/freescale
parent94985cc9d3d7ed991ca8b2627d5894df5ea68f49 (diff)
downloadblackbird-obmc-uboot-a187559e3d586891c917279044c5386d1b2adc6e.tar.gz
blackbird-obmc-uboot-a187559e3d586891c917279044c5386d1b2adc6e.zip
Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/b4860qds/eth_b4860qds.c2
-rw-r--r--board/freescale/bsc9131rdb/README6
-rw-r--r--board/freescale/bsc9132qds/README6
-rw-r--r--board/freescale/c29xpcie/README4
-rw-r--r--board/freescale/ls2080a/README2
-rw-r--r--board/freescale/ls2080aqds/README2
-rw-r--r--board/freescale/ls2080aqds/eth.c2
-rw-r--r--board/freescale/ls2080ardb/README2
-rw-r--r--board/freescale/m52277evb/README8
-rw-r--r--board/freescale/m5253evbe/README2
-rw-r--r--board/freescale/m53017evb/README6
-rw-r--r--board/freescale/m5373evb/README6
-rw-r--r--board/freescale/m54455evb/README10
-rw-r--r--board/freescale/m547xevb/README4
-rw-r--r--board/freescale/mpc8313erdb/README4
-rw-r--r--board/freescale/mpc8315erdb/README2
-rw-r--r--board/freescale/mpc8323erdb/README6
-rw-r--r--board/freescale/mpc832xemds/README4
-rw-r--r--board/freescale/mpc837xemds/README2
-rw-r--r--board/freescale/mpc837xerdb/README2
-rw-r--r--board/freescale/mpc8569mds/README6
-rw-r--r--board/freescale/mpc8572ds/README14
-rw-r--r--board/freescale/mpc8610hpcd/README2
-rw-r--r--board/freescale/mpc8641hpcn/README8
-rw-r--r--board/freescale/mx28evk/README2
-rw-r--r--board/freescale/mx35pdk/README4
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c2
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c2
-rw-r--r--board/freescale/mx6sxsabreauto/mx6sxsabreauto.c2
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c2
-rw-r--r--board/freescale/mx6ul_14x14_evk/README6
-rw-r--r--board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c2
-rw-r--r--board/freescale/mx7dsabresd/mx7dsabresd.c2
-rw-r--r--board/freescale/p1010rdb/README.P1010RDB-PA6
-rw-r--r--board/freescale/p1010rdb/README.P1010RDB-PB4
-rw-r--r--board/freescale/t102xqds/README30
-rw-r--r--board/freescale/t102xqds/eth_t102xqds.c2
-rw-r--r--board/freescale/t102xrdb/README38
-rw-r--r--board/freescale/t1040qds/README10
-rw-r--r--board/freescale/t104xrdb/README28
-rwxr-xr-xboard/freescale/t208xqds/README34
-rw-r--r--board/freescale/t208xqds/eth_t208xqds.c2
-rw-r--r--board/freescale/t208xrdb/README30
-rw-r--r--board/freescale/t4qds/README18
-rw-r--r--board/freescale/t4qds/eth.c4
45 files changed, 171 insertions, 171 deletions
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 4b2303e849..164ec0a47b 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -269,7 +269,7 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
/*
- * XFI does not need a PHY to work, but to make U-boot
+ * XFI does not need a PHY to work, but to make U-Boot
* happy, assign a fake PHY address for a XFI port.
*/
fm_info_set_phy_address(FM1_10GEC1, 0);
diff --git a/board/freescale/bsc9131rdb/README b/board/freescale/bsc9131rdb/README
index 4902b98ba1..c8405970c1 100644
--- a/board/freescale/bsc9131rdb/README
+++ b/board/freescale/bsc9131rdb/README
@@ -86,9 +86,9 @@ Default Boot Method
--------------------
NAND boot
-Building U-boot
+Building U-Boot
--------------
-To build the u-boot for BSC9131RDB:
+To build the U-Boot for BSC9131RDB:
1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default)
make BSC9131RDB_NAND
2. NAND Flash with sysclk 100MHz(J16 on RDB open)
@@ -123,7 +123,7 @@ DDR Memory map
Flashing Images
---------------
-To place a new u-boot image in the NAND flash and then boot
+To place a new U-Boot image in the NAND flash and then boot
with that new image temporarily, use this:
tftp 1000000 u-boot-nand.bin
nand erase 0 100000
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
index f8377c9aa4..ede95d41da 100644
--- a/board/freescale/bsc9132qds/README
+++ b/board/freescale/bsc9132qds/README
@@ -87,9 +87,9 @@ Default Boot Method
--------------------
NOR boot
-Building U-boot
+Building U-Boot
--------------
-To build the u-boot for BSC9132QDS:
+To build the U-Boot for BSC9132QDS:
1. NOR Flash
make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK
make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK
@@ -122,7 +122,7 @@ Memory map
Flashing Images
---------------
-To place a new u-boot image in the NAND flash and then boot
+To place a new U-Boot image in the NAND flash and then boot
with that new image temporarily, use this:
tftp 1000000 u-boot-nand.bin
nand erase 0 100000
diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
index 3bc396b35a..2e249cbb3a 100644
--- a/board/freescale/c29xpcie/README
+++ b/board/freescale/c29xpcie/README
@@ -53,7 +53,7 @@ Settings of DIP-switch
SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash
Note: 1 stands for 'off', 0 stands for 'on'
-Build and program u-boot to NOR flash
+Build and program U-Boot to NOR flash
==================================
1. Build u-boot.bin image example:
export ARCH=powerpc
@@ -86,7 +86,7 @@ There are four banks in C29XPCIE board, example to change bank booting:
- bank 4 on the flash 0x3000000~0x3ffffff
or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again.
-Build and program u-boot to SPI flash
+Build and program U-Boot to SPI flash
==================================
1. Build u-boot-spi.bin image
make C29xPCIE_SPIFLASH_config; make
diff --git a/board/freescale/ls2080a/README b/board/freescale/ls2080a/README
index 7e53f1f1e4..646cc02693 100644
--- a/board/freescale/ls2080a/README
+++ b/board/freescale/ls2080a/README
@@ -12,7 +12,7 @@ Memory map from core's view
0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
-Other addresses are either reserved, or not used directly by u-boot.
+Other addresses are either reserved, or not used directly by U-Boot.
This list should be updated when more addresses are used.
Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index 375e97c9b0..6ddad92f2c 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -103,7 +103,7 @@ Memory map from core's view
0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
-Other addresses are either reserved, or not used directly by u-boot.
+Other addresses are either reserved, or not used directly by U-Boot.
This list should be updated when more addresses are used.
IFC region map from core's view
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index ebc9d47468..42ff74317e 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -716,7 +716,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
switch (serdes1_prtcl) {
case 0x2A:
/*
- * XFI does not need a PHY to work, but to avoid U-boot use
+ * XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
* a MAC has no PHY address, we give a PHY address to XFI
* MAC, and should not use a real XAUI PHY address, since
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
index 7fc2569648..6708ca9cc7 100644
--- a/board/freescale/ls2080ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -87,7 +87,7 @@ Memory map from core's view
0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
-Other addresses are either reserved, or not used directly by u-boot.
+Other addresses are either reserved, or not used directly by U-Boot.
This list should be updated when more addresses are used.
IFC region map from core's view
diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README
index 3178d49d0a..92a83849ac 100644
--- a/board/freescale/m52277evb/README
+++ b/board/freescale/m52277evb/README
@@ -49,7 +49,7 @@ Changed files:
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h u-boot structure
+- include/asm-m68k/u-boot.h U-Boot structure
- include/configs/M52277EVB.h Board specific configuration file
@@ -77,7 +77,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
RTC_DEBUG -- define to show RTC debug message
-CONFIG_CMD_DATE -- enable to use date feature in u-boot
+CONFIG_CMD_DATE -- enable to use date feature in U-Boot
CONFIG_MCFTMR -- define to use DMA timer
CONFIG_MCFPIT -- define to use PIT timer
@@ -102,7 +102,7 @@ CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
-CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
+CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot,
update will be provided at later time
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
@@ -113,7 +113,7 @@ update will be provided at later time
SRAM: 0x80000000-0x8FFFFFFF (256MB)
IP: 0xF0000000-0xFFFFFFFF (256MB)
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
linux kernel, you can customize it based on your system requirements:
Flash0: 0x00000000-0x00FFFFFF (16MB)
diff --git a/board/freescale/m5253evbe/README b/board/freescale/m5253evbe/README
index f51609f3e0..2ed5c768d5 100644
--- a/board/freescale/m5253evbe/README
+++ b/board/freescale/m5253evbe/README
@@ -13,7 +13,7 @@ Created 06/05/2007
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
-2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+2.1. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
linux kernel, you can customize it based on your system requirements:
SDR: 0x00000000-0x00ffffff
SRAM0: 0x20010000-0x20017fff
diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README
index 84fc1ecfb1..224e79c46a 100644
--- a/board/freescale/m53017evb/README
+++ b/board/freescale/m53017evb/README
@@ -47,7 +47,7 @@ Changed files:
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h u-boot structure
+- include/asm-m68k/u-boot.h U-Boot structure
- include/configs/M53017EVB.h Board specific configuration file
@@ -75,7 +75,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
RTC_DEBUG -- define to show RTC debug message
-CONFIG_CMD_DATE -- enable to use date feature in u-boot
+CONFIG_CMD_DATE -- enable to use date feature in U-Boot
CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_MII -- enable to use MII driver
@@ -118,7 +118,7 @@ CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
SRAM: 0x80000000-0x8FFFFFFF (256MB)
IP: 0xFC000000-0xFFFFFFFF (256MB)
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
linux kernel, you can customize it based on your system requirements:
Flash0: 0x00000000-0x00FFFFFF (16MB)
DDR: 0x40000000-0x4FFFFFFF (256MB)
diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README
index 52eac7b2ff..582e0c3d9e 100644
--- a/board/freescale/m5373evb/README
+++ b/board/freescale/m5373evb/README
@@ -46,7 +46,7 @@ Changed files:
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h u-boot structure
+- include/asm-m68k/u-boot.h U-Boot structure
- include/configs/M5373EVB.h Board specific configuration file
@@ -74,7 +74,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
RTC_DEBUG -- define to show RTC debug message
-CONFIG_CMD_DATE -- enable to use date feature in u-boot
+CONFIG_CMD_DATE -- enable to use date feature in U-Boot
CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_MII -- enable to use MII driver
@@ -117,7 +117,7 @@ CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
SRAM: 0x80000000-0x8FFFFFFF (256MB)
IP: 0xF0000000-0xFFFFFFFF (256MB)
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
linux kernel, you can customize it based on your system requirements:
Flash0: 0x00000000-0x00FFFFFF (16MB)
diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README
index c70c4c5c25..c563ad99a7 100644
--- a/board/freescale/m54455evb/README
+++ b/board/freescale/m54455evb/README
@@ -48,7 +48,7 @@ Changed files:
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h u-boot structure
+- include/asm-m68k/u-boot.h U-Boot structure
- include/configs/M54455EVB.h Board specific configuration file
@@ -78,7 +78,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
RTC_DEBUG -- define to show RTC debug message
-CONFIG_CMD_DATE -- enable to use date feature in u-boot
+CONFIG_CMD_DATE -- enable to use date feature in U-Boot
CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_MII -- enable to use MII driver
@@ -91,7 +91,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
MCFFEC_TOUT_LOOP -- set FEC timeout loop
-CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
+CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot
CONFIG_ISO_PARTITION -- enable ISO read/write
CONFIG_DOS_PARTITION -- enable DOS read/write
@@ -136,7 +136,7 @@ CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc
CONFIG_SYS_MBAR -- define MBAR offset
-CONFIG_SYS_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel
+CONFIG_SYS_ATMEL_BOOT -- To determine the U-Boot is booted from Atmel or Intel
CONFIG_MONITOR_IS_IN_RAM -- Not support
@@ -163,7 +163,7 @@ CONFIG_SYS_SDRAM_BASE1 -- defines the DRAM Base 1
FlexBus: 0xC0000000-0xDFFFFFFF (512MB)
IP: 0xF0000000-0xFFFFFFFF (256MB)
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
linux kernel, you can customize it based on your system requirements:
Atmel boot:
Flash0: 0x00000000-0x0007FFFF (512KB)
diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README
index ce497c0d2a..30c5dedafe 100644
--- a/board/freescale/m547xevb/README
+++ b/board/freescale/m547xevb/README
@@ -54,7 +54,7 @@ Changed files:
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h u-boot structure
+- include/asm-m68k/u-boot.h U-Boot structure
- include/configs/M5475EVB.h Board specific configuration file
@@ -88,7 +88,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
MCFFEC_TOUT_LOOP -- set FEC timeout loop
-CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
+CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot
CONFIG_CMD_USB -- enable USB commands
CONFIG_USB_OHCI_NEW -- enable USB OHCI driver
diff --git a/board/freescale/mpc8313erdb/README b/board/freescale/mpc8313erdb/README
index be7ef32b45..697cee4c42 100644
--- a/board/freescale/mpc8313erdb/README
+++ b/board/freescale/mpc8313erdb/README
@@ -70,7 +70,7 @@ Freescale MPC8313ERDB Board
5. Downloading and Flashing Images
-5.1 Reflash U-boot Image using U-boot
+5.1 Reflash U-Boot Image using U-Boot
NOR flash:
@@ -81,7 +81,7 @@ Freescale MPC8313ERDB Board
first, to make sure that the TFTP load will succeed before it
goes ahead and wipes out your current firmware. And of course,
have an alternate means of programming the flash available
- if the new u-boot doesn't boot.
+ if the new U-Boot doesn't boot.
NAND flash:
diff --git a/board/freescale/mpc8315erdb/README b/board/freescale/mpc8315erdb/README
index b32132d053..8ad6d810c7 100644
--- a/board/freescale/mpc8315erdb/README
+++ b/board/freescale/mpc8315erdb/README
@@ -63,7 +63,7 @@ Freescale MPC8315ERDB Board
5. Downloading and Flashing Images
-5.1 Reflash U-boot Image using U-boot
+5.1 Reflash U-Boot Image using U-Boot
NOR flash:
diff --git a/board/freescale/mpc8323erdb/README b/board/freescale/mpc8323erdb/README
index 6f89829373..9a46da0781 100644
--- a/board/freescale/mpc8323erdb/README
+++ b/board/freescale/mpc8323erdb/README
@@ -22,10 +22,10 @@ Freescale MPC8323ERDB Board
3. Downloading and Flashing Images
-3.1 Reflash U-boot Image using U-boot
+3.1 Reflash U-Boot Image using U-Boot
N.b, have an alternate means of programming
- the flash available if the new u-boot doesn't boot.
+ the flash available if the new U-Boot doesn't boot.
First try a:
@@ -44,7 +44,7 @@ Freescale MPC8323ERDB Board
erase fe000000 +$filesize
cp.b $loadaddr fe000000 $filesize
- To keep your old u-boot's environment variables, do a:
+ To keep your old U-Boot's environment variables, do a:
saveenv
diff --git a/board/freescale/mpc832xemds/README b/board/freescale/mpc832xemds/README
index 4142aa9c8d..d141cd33e7 100644
--- a/board/freescale/mpc832xemds/README
+++ b/board/freescale/mpc832xemds/README
@@ -97,7 +97,7 @@ Freescale MPC832XEMDS Board
make MPC832XEMDS_config
make
- MPC832x support PCI 33MHz and PCI 66MHz, to make u-boot support PCI:
+ MPC832x support PCI 33MHz and PCI 66MHz, to make U-Boot support PCI:
1)Make sure the DIP SW support PCI mode as described in Section 1.1.
@@ -113,7 +113,7 @@ Freescale MPC832XEMDS Board
tftp 10000 u-boot.bin
-5.1 Reflash U-boot Image using U-boot
+5.1 Reflash U-Boot Image using U-Boot
tftp 20000 u-boot.bin
protect off fe000000 fe0fffff
diff --git a/board/freescale/mpc837xemds/README b/board/freescale/mpc837xemds/README
index faf21c9ffb..dbb15171e6 100644
--- a/board/freescale/mpc837xemds/README
+++ b/board/freescale/mpc837xemds/README
@@ -90,7 +90,7 @@ Freescale MPC837xEMDS Board
tftp 40000 u-boot.bin
-5.1 Reflash U-boot Image using U-boot
+5.1 Reflash U-Boot Image using U-Boot
tftp 40000 u-boot.bin
protect off fe000000 fe1fffff
diff --git a/board/freescale/mpc837xerdb/README b/board/freescale/mpc837xerdb/README
index cfb6efa27e..12df2f2e75 100644
--- a/board/freescale/mpc837xerdb/README
+++ b/board/freescale/mpc837xerdb/README
@@ -84,7 +84,7 @@ Freescale MPC837xE-RDB Board
tftp $loadaddr u-boot.bin
-5.1 Reflash U-boot Image using U-boot
+5.1 Reflash U-Boot Image using U-Boot
tftp $loadaddr u-boot.bin
protect off fe000000 fe0fffff
diff --git a/board/freescale/mpc8569mds/README b/board/freescale/mpc8569mds/README
index 3d12a964cd..86c3ccde79 100644
--- a/board/freescale/mpc8569mds/README
+++ b/board/freescale/mpc8569mds/README
@@ -3,7 +3,7 @@ Overview
MPC8569MDS is composed of two boards - PB (Processor Board) and PIB (Platform
I/O Board). The mpc8569 PowerTM processor is mounted on PB board.
-Building U-boot
+Building U-Boot
-----------
make MPC8569MDS_config
make
@@ -22,10 +22,10 @@ Memory Map
0xfe00_0000 0xffff_ffff Flash 32MB
-Flashing u-boot Images
+Flashing U-Boot Images
---------------
-Use the following commands to program u-boot image into flash:
+Use the following commands to program U-Boot image into flash:
=> tftp 1000000 u-boot.bin
=> protect off all
diff --git a/board/freescale/mpc8572ds/README b/board/freescale/mpc8572ds/README
index 57fd2ad616..f1ffdd1730 100644
--- a/board/freescale/mpc8572ds/README
+++ b/board/freescale/mpc8572ds/README
@@ -3,7 +3,7 @@ Overview
MPC8572DS is a high-performance computing, evaluation and development platform
supporting the mpc8572 PowerTM processor.
-Building U-boot
+Building U-Boot
-----------
make MPC8572DS_config
make
@@ -22,14 +22,14 @@ Memory Map
0xe800_0000 - 0xebff_ffff Alternate bank 64MB
0xec00_0000 - 0xefff_ffff Boot bank 64MB
-0xebf8_0000 - 0xebff_ffff Alternate u-boot address 512KB
-0xeff8_0000 - 0xefff_ffff Boot u-boot address 512KB
+0xebf8_0000 - 0xebff_ffff Alternate U-Boot address 512KB
+0xeff8_0000 - 0xefff_ffff Boot U-Boot address 512KB
Flashing Images
---------------
-To place a new u-boot image in the alternate flash bank and then reset with that
+To place a new U-Boot image in the alternate flash bank and then reset with that
new image temporarily, use this:
tftp 1000000 u-boot.bin
@@ -135,7 +135,7 @@ Implementing AMP(Asymmetric MultiProcessing)
5. Bring up two cores separately:
- a. Power on the board, under u-boot prompt:
+ a. Power on the board, under U-Boot prompt:
=> setenv <serverip>
=> setenv <ipaddr>
=> setenv bootargs root=/dev/ram rw console=ttyS0,115200
@@ -154,7 +154,7 @@ Implementing AMP(Asymmetric MultiProcessing)
=> fdt chosen $initrd_start $initrd_end
=> bootm prep
=> cpu 1 release $bootm_low - $fdtaddr -
- c. Bring up core0's kernel(on the same u-boot console):
+ c. Bring up core0's kernel(on the same U-Boot console):
=> setenv bootm_low 0
=> setenv bootm_size 0x20000000
=> tftp 1000000 8572/uImage.core0
@@ -162,5 +162,5 @@ Implementing AMP(Asymmetric MultiProcessing)
=> tftp c00000 8572/mpc8572ds_core0.dtb
=> bootm 1000000 2000000 c00000
-Please note only core0 will run u-boot, core1 starts kernel directly after
+Please note only core0 will run U-Boot, core1 starts kernel directly after
"cpu release" command is issued.
diff --git a/board/freescale/mpc8610hpcd/README b/board/freescale/mpc8610hpcd/README
index 31a9af3fee..066e625d48 100644
--- a/board/freescale/mpc8610hpcd/README
+++ b/board/freescale/mpc8610hpcd/README
@@ -27,7 +27,7 @@ To Flash U-Boot into the booting bank:
cp.b 1000000 fff00000 $filesize
-To Flash U-boot into the alternate bank
+To Flash U-Boot into the alternate bank
tftp 1000000 u-boot.bin
erase fbf00000 +$filesize
diff --git a/board/freescale/mpc8641hpcn/README b/board/freescale/mpc8641hpcn/README
index d8fe0a4a13..77909a8383 100644
--- a/board/freescale/mpc8641hpcn/README
+++ b/board/freescale/mpc8641hpcn/README
@@ -80,7 +80,7 @@ Switches:
3. Flash U-Boot
---------------
The flash range 0xEF800000 to 0xEFFFFFFF can be divided into 2 halves.
-It is possible to use either half to boot using u-boot. Switch 5 bit 2
+It is possible to use either half to boot using U-Boot. Switch 5 bit 2
is used for this purpose.
0xEF800000 to 0xEFBFFFFF - 4MB
@@ -102,7 +102,7 @@ To Flash U-Boot into the booting bank (0xEFC00000 - 0xEFFFFFFF):
or use tftpflash command:
run tftpflash
-To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF):
+To Flash U-Boot into the alternative bank (0xEF800000 - 0xEFBFFFFF):
tftp 1000000 u-boot.bin
erase efb00000 +$filesize
@@ -113,7 +113,7 @@ To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF):
-------------
NOTE: RIO and PCI are mutually exclusive, so they share an address
-For 32-bit u-boot, devices are mapped so that the virtual address ==
+For 32-bit U-Boot, devices are mapped so that the virtual address ==
the physical address, and the map looks liks this:
Memory Range Device Size
@@ -130,7 +130,7 @@ the physical address, and the map looks liks this:
0xffc1_0000 0xffc1_ffff PCI2/PEX2 IO 64K
0xef80_0000 0xefff_ffff Flash 8M
-For 36-bit-enabled u-boot, the virtual map is the same as for 32-bit.
+For 36-bit-enabled U-Boot, the virtual map is the same as for 32-bit.
However, the physical map is altered to reside in 36-bit space, as follows.
Addresses are no longer mapped with VA == PA. All accesses from
software use the VA; the PA is only used for setting up windows
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
index f9d6324114..a248fb21df 100644
--- a/board/freescale/mx28evk/README
+++ b/board/freescale/mx28evk/README
@@ -1,7 +1,7 @@
FREESCALE MX28EVK
==================
-Supported hardware: MX28EVK rev C and D are supported in U-boot.
+Supported hardware: MX28EVK rev C and D are supported in U-Boot.
Files of the MX28EVK port
--------------------------
diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README
index 7232b53357..6f6841f099 100644
--- a/board/freescale/mx35pdk/README
+++ b/board/freescale/mx35pdk/README
@@ -71,7 +71,7 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf
Flashing U-Boot
--------------------------------
-U-boot should be stored on the NOR flash.
+U-Boot should be stored on the NOR flash.
The boot storage can be select using the switches on the personality board
(SW1-SW2) and on the DEBUG board (SW4-SW10).
@@ -96,7 +96,7 @@ Creating 6 MTD partitions on "mxc_nor_flash.0":
To erase the whole partition:
$ flash_eraseall /dev/mtd0
-Writing u-boot:
+Writing U-Boot:
dd if=u-boot.bin of=/dev/mtd0
To boot from NOR, you have to select the switches as follows:
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 46b4f3f68e..e9d9664a82 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -268,7 +268,7 @@ int board_mmc_init(bd_t *bis)
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 SD2
* mmc1 SD3
* mmc2 eMMC
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index df205eac6f..4f816c4c02 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -202,7 +202,7 @@ int board_mmc_init(bd_t *bis)
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC1
* mmc1 USDHC2
* mmc2 USDHC3
diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
index c9631d2578..a240982975 100644
--- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
+++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
@@ -339,7 +339,7 @@ int board_mmc_init(bd_t *bis)
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC3
* mmc1 USDHC4
*/
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 97e9ed7df6..41319c66d2 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -348,7 +348,7 @@ int board_mmc_init(bd_t *bis)
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC2
* mmc1 USDHC3
* mmc2 USDHC4
diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README
index d48c7ba20f..1edccf688c 100644
--- a/board/freescale/mx6ul_14x14_evk/README
+++ b/board/freescale/mx6ul_14x14_evk/README
@@ -1,7 +1,7 @@
-How to use U-boot on Freescale MX6UL 14x14 EVK
+How to use U-Boot on Freescale MX6UL 14x14 EVK
-----------------------------------------------
-- Build U-boot for MX6UL 14x14 EVK:
+- Build U-Boot for MX6UL 14x14 EVK:
$ make mrproper
$ make mx6ul_14x14_evk_defconfig
@@ -28,5 +28,5 @@ switch label numbers reference).
- Connect the USB cable between the EVK and the PC for the console.
(The USB console connector is the one close the push buttons)
-- Insert the micro SD card in the board, power it up and U-boot messages should
+- Insert the micro SD card in the board, power it up and U-Boot messages should
come up.
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index b9b35736cf..98d5675ff1 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -394,7 +394,7 @@ int board_mmc_init(bd_t *bis)
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC1
* mmc1 USDHC2
*/
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 20e56f281b..fee24e2b5f 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -366,7 +366,7 @@ int board_mmc_init(bd_t *bis)
int i, ret;
/*
* According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
+ * (U-Boot device node) (Physical Port)
* mmc0 USDHC1
* mmc2 USDHC3 (eMMC)
*/
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index cde246dde2..105942f7a5 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -95,7 +95,7 @@ is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
instead of to CAN/UART1.
-Build and burn u-boot to NOR flash
+Build and burn U-Boot to NOR flash
==================================
1. Build u-boot.bin image
export ARCH=powerpc
@@ -131,7 +131,7 @@ CPLD NOR bank selection register address 0xFFB00009 Bit[0]:
1 - boot from lower 4 sectors
-Build and burn u-boot to NAND flash
+Build and burn U-Boot to NAND flash
===================================
1. Build u-boot.bin image
export ARCH=powerpc
@@ -146,7 +146,7 @@ Build and burn u-boot to NAND flash
3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
-Build and burn u-boot to SPI flash
+Build and burn U-Boot to SPI flash
==================================
1. Build u-boot-spi.bin image
make P1010RDB_SPIFLASH_config; make
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
index c5d1419445..dc82f0df09 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ b/board/freescale/p1010rdb/README.P1010RDB-PB
@@ -112,14 +112,14 @@ To enable FlexCAN:
To enable SDHC in case of NOR/NAND/SPI boot
a) For temporary use case in runtime without reboot system
- run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC.
+ run 'mux sdhc' in U-Boot to validate SDHC with invalidating IFC.
b) For long-term use case
set 'esdhc' in hwconfig and save it.
To enable IFC in case of SD boot
a) For temporary use case in runtime without reboot system
- run 'mux ifc' in u-boot to validate IFC with invalidating SDHC.
+ run 'mux ifc' in U-Boot to validate IFC with invalidating SDHC.
b) For long-term use case
set 'ifc' in hwconfig and save it.
diff --git a/board/freescale/t102xqds/README b/board/freescale/t102xqds/README
index bb0f2805dc..c00e3bafbe 100644
--- a/board/freescale/t102xqds/README
+++ b/board/freescale/t102xqds/README
@@ -172,16 +172,16 @@ Start Address End Address Description Size
128MB NOR Flash memory Map
--------------------------
Start Address End Address Definition Max size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
@@ -221,11 +221,11 @@ Software configurations and board settings
Switching between default bank0 and alternate bank4 on NOR flash
To change boot source to vbank4:
- via software: run command 'qixis_reset altbank' in u-boot.
+ via software: run command 'qixis_reset altbank' in U-Boot.
via DIP-switch: set SW6[1:4] = '0100'
To change boot source to vbank0:
- via software: run command 'qixis_reset' in u-boot.
+ via software: run command 'qixis_reset' in U-Boot.
via DIP-Switch: set SW6[1:4] = '0000'
2. NAND Boot:
@@ -273,8 +273,8 @@ e) For SDXC: set adaptor=sdxc in hwconfig
-------------------------------
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
SPL further initializes DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -294,14 +294,14 @@ Run time view of SPL framework
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
-|U-boot SPL | 0xFFFD8000 (160KB) |
+|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T1024QDS
-------------------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB
-0x100000 0x15FFFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot 1MB
+0x100000 0x15FFFF U-Boot env 8KB
0x160000 0x17FFFF FMAN Ucode 128KB
0x180000 0x19FFFF QE Firmware 128KB
@@ -309,8 +309,8 @@ Start End Definition Size
SD Card memory Map on T1024QDS
----------------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot img 1MB
-0x800 0016 u-boot env 8KB
+0x008 2048 U-Boot img 1MB
+0x800 0016 U-Boot env 8KB
0x820 0256 FMAN Ucode 128KB
0x920 0256 QE Firmware 128KB
@@ -318,8 +318,8 @@ Block #blocks Definition Size
SPI Flash memory Map on T1024QDS
----------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB
-0x100000 0x101FFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot img 1MB
+0x100000 0x101FFF U-Boot env 8KB
0x110000 0x12FFFF FMAN Ucode 128KB
0x130000 0x14FFFF QE Firmware 128KB
diff --git a/board/freescale/t102xqds/eth_t102xqds.c b/board/freescale/t102xqds/eth_t102xqds.c
index ca54e2a4f0..19543c0738 100644
--- a/board/freescale/t102xqds/eth_t102xqds.c
+++ b/board/freescale/t102xqds/eth_t102xqds.c
@@ -310,7 +310,7 @@ int board_eth_init(bd_t *bis)
case 0x95:
case 0x99:
/*
- * XFI does not need a PHY to work, but to avoid U-boot use
+ * XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
* a MAC has no PHY address, we give a PHY address to XFI
* MAC, and should not use a real XAUI PHY address, since
diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README
index 7d3794a6d6..a0af25a432 100644
--- a/board/freescale/t102xrdb/README
+++ b/board/freescale/t102xrdb/README
@@ -145,8 +145,8 @@ Start Address End Address Description Size
128MB NOR Flash Memory Layout
-----------------------------
Start Address End Address Definition Max size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB
0xED300000 0xEFDFFFFF rootfs (alt bank) 44MB
@@ -158,8 +158,8 @@ Start Address End Address Definition Max size
0xEC700000 0xEC7FFFFF HV.uImage (alternate bank) 1MB
0xEC020000 0xEC6FFFFF Linux.uImage (alt bank) ~7MB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB
0xE9300000 0xEBDFFFFF rootfs (current bank) 44MB
@@ -198,18 +198,18 @@ Software configurations and board settings
Switching between default bank0 and alternate bank4 on NOR flash
To change boot source to vbank4:
on T1024RDB:
- via software: run command 'cpld reset altbank' in u-boot.
+ via software: run command 'cpld reset altbank' in U-Boot.
via DIP-switch: set SW3[5:7] = '100'
on T1023RDB:
- via software: run command 'switch bank4' in u-boot.
+ via software: run command 'switch bank4' in U-Boot.
via DIP-switch: set SW3[5:7] = '100'
To change boot source to vbank0:
on T1024RDB:
- via software: run command 'cpld reset' in u-boot.
+ via software: run command 'cpld reset' in U-Boot.
via DIP-Switch: set SW3[5:7] = '000'
on T1023RDB:
- via software: run command 'switch bank0' in u-boot.
+ via software: run command 'switch bank0' in U-Boot.
via DIP-switch: set SW3[5:7] = '000'
2. NAND Boot:
@@ -255,8 +255,8 @@ Software configurations and board settings
-------------------------------
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
SPL further initializes DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -276,14 +276,14 @@ Run time view of SPL framework
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
-|U-boot SPL | 0xFFFD8000 (160KB) |
+|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T1024RDB
-------------------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB(2 block)
-0x100000 0x17FFFF u-boot env 512KB(1 block)
+0x000000 0x0FFFFF U-Boot 1MB(2 block)
+0x100000 0x17FFFF U-Boot env 512KB(1 block)
0x180000 0x1FFFFF FMAN Ucode 512KB(1 block)
0x200000 0x27FFFF QE Firmware 512KB(1 block)
@@ -291,16 +291,16 @@ Start End Definition Size
NAND Flash memory Map on T1023RDB
----------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB
-0x100000 0x15FFFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot 1MB
+0x100000 0x15FFFF U-Boot env 8KB
0x160000 0x17FFFF FMAN Ucode 128KB
SD Card memory Map on T102xRDB
----------------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot img 1MB
-0x800 0016 u-boot env 8KB
+0x008 2048 U-Boot img 1MB
+0x800 0016 U-Boot env 8KB
0x820 0256 FMAN Ucode 128KB
0x920 0256 QE Firmware 128KB(only T1024RDB)
@@ -308,8 +308,8 @@ Block #blocks Definition Size
64MB SPI Flash memory Map on T102xRDB
----------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB
-0x100000 0x101FFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot img 1MB
+0x100000 0x101FFF U-Boot env 8KB
0x110000 0x12FFFF FMAN Ucode 128KB
0x130000 0x14FFFF QE Firmware 128KB(only T1024RDB)
0x300000 0x3FFFFF device tree 128KB
diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README
index 8160ca0bc0..6c5ffc07f8 100644
--- a/board/freescale/t1040qds/README
+++ b/board/freescale/t1040qds/README
@@ -118,15 +118,15 @@ Start Address End Address Description Size
NOR Flash memory Map on T1040QDS
--------------------------------
Start End Definition Size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
@@ -138,7 +138,7 @@ Various Software configurations/environment variables/commands
--------------------------------------------------------------
The below commands apply to T1040QDS
-1. U-boot environment variable hwconfig
+1. U-Boot environment variable hwconfig
The default hwconfig is:
hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
dr_mode=host,phy_type=utmi
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index b9d2212000..98b3f63db2 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -186,15 +186,15 @@ Start Address End Address Description Size
NOR Flash memory Map
---------------------
Start End Definition Size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
@@ -206,7 +206,7 @@ Various Software configurations/environment variables/commands
--------------------------------------------------------------
The below commands apply to the board
-1. U-boot environment variable hwconfig
+1. U-Boot environment variable hwconfig
The default hwconfig is:
hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
dr_mode=host,phy_type=utmi
@@ -228,8 +228,8 @@ NAND boot with 2 Stage boot loader
----------------------------------
PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
SPL further initialise DDR using SPD and environment variables and copy
-u-boot(768 KB) from flash to DDR.
-Finally SPL transer control to u-boot for futher booting.
+U-Boot(768 KB) from flash to DDR.
+Finally SPL transer control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -250,30 +250,30 @@ SPL has following features:
-----------------------------------------------
STACK | 0xFFFD8000 (22KB) |
-----------------------------------------------
- U-boot SPL | 0xFFFD8000 (160KB) |
+ U-Boot SPL | 0xFFFD8000 (160KB) |
-----------------------------------------------
NAND Flash memory Map on T104xRDB
------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB
-0x180000 0x19FFFF u-boot env 128KB
+0x000000 0x0FFFFF U-Boot 1MB
+0x180000 0x19FFFF U-Boot env 128KB
0x280000 0x29FFFF FMAN Ucode 128KB
0x380000 0x39FFFF QE Firmware 128KB
SD Card memory Map on T104xRDB
------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot 1MB
-0x800 0024 u-boot env 8KB
+0x008 2048 U-Boot 1MB
+0x800 0024 U-Boot env 8KB
0x820 0256 FMAN Ucode 128KB
0x920 0256 QE Firmware 128KB
SPI Flash memory Map on T104xRDB
------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot 1MB
-0x100000 0x101FFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot 1MB
+0x100000 0x101FFF U-Boot env 8KB
0x110000 0x12FFFF FMAN Ucode 128KB
0x130000 0x14FFFF QE Firmware 128KB
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index 83060c10f3..2a2a0e514c 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -92,7 +92,7 @@ XFI:
10GBASE-KR scenario.
So, for XFI usage, there are two scenarios, one will use fiber cable,
another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
- introduced to indicate a XFI port will use copper cable, and U-boot
+ introduced to indicate a XFI port will use copper cable, and U-Boot
will fixup the dtb accordingly.
It's used as: fsl_10gkr_copper:<10g_mac_name>
The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they
@@ -108,7 +108,7 @@ XFI:
- T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane
in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration
- Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper
+ Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper
initialization.
Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
@@ -142,15 +142,15 @@ Start Address End Address Description Size
128M NOR Flash memory Map
-------------------------
Start Address End Address Definition Max size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
@@ -172,11 +172,11 @@ Software configurations and board settings
Switching between default bank0 and alternate bank4 on NOR flash
To change boot source to vbank4:
- by software: run command 'qixis_reset altbank' in u-boot.
+ by software: run command 'qixis_reset altbank' in U-Boot.
by DIP-switch: set SW6[1:4] = '0100'
To change boot source to vbank0:
- by software: run command 'qixis_reset' in u-boot.
+ by software: run command 'qixis_reset' in U-Boot.
by DIP-Switch: set SW6[1:4] = '0000'
2. NAND Boot:
@@ -216,8 +216,8 @@ Software configurations and board settings
-------------------------------
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
SPL further initializes DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -237,30 +237,30 @@ Run time view of SPL framework
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
-|U-boot SPL | 0xFFFD8000 (160KB) |
+|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T2080QDS
--------------------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB (2 blocks)
-0x100000 0x17FFFF u-boot env 512KB (1 block)
+0x000000 0x0FFFFF U-Boot img 1MB (2 blocks)
+0x100000 0x17FFFF U-Boot env 512KB (1 block)
0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
Micro SD Card memory Map on T2080QDS
----------------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot img 1MB
-0x800 0016 u-boot env 8KB
+0x008 2048 U-Boot img 1MB
+0x800 0016 U-Boot env 8KB
0x820 0128 FMAN ucode 64KB
SPI Flash memory Map on T2080QDS
----------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB
-0x100000 0x101FFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot img 1MB
+0x100000 0x101FFF U-Boot env 8KB
0x110000 0x11FFFF FMAN ucode 64KB
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index f08cff2654..e92b5d3a05 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -600,7 +600,7 @@ int board_eth_init(bd_t *bis)
case 0x66:
case 0x67:
/*
- * XFI does not need a PHY to work, but to avoid U-boot use
+ * XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
* a MAC has no PHY address, we give a PHY address to XFI
* MAC, and should not use a real XAUI PHY address, since
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index 24484cd0ff..42b2b92396 100644
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -107,16 +107,16 @@ Start Address End Address Description Size
128M NOR Flash memory Map
-------------------------
Start Address End Address Definition Max size
-0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
0xEFE00000 0xEFE3FFFF PHY CS4315 firmware 256KB
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
0xEBE00000 0xEBE3FFFF PHY CS4315 firmware (alt bank) 256KB
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
@@ -155,11 +155,11 @@ Software configurations and board settings
Switching between default bank and alternate bank on NOR flash
To change boot source to vbank4:
- via software: run command 'cpld reset altbank' in u-boot.
+ via software: run command 'cpld reset altbank' in U-Boot.
via DIP-switch: set SW3[5:7] = '100'
To change boot source to vbank0:
- via software: run command 'cpld reset' in u-boot.
+ via software: run command 'cpld reset' in U-Boot.
via DIP-Switch: set SW3[5:7] = '000'
2. NAND Boot:
@@ -197,8 +197,8 @@ Software configurations and board settings
-------------------------------
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
SPL further initializes DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -218,14 +218,14 @@ Run time view of SPL framework
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
-|U-boot SPL | 0xFFFD8000 (160KB) |
+|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T2080RDB
--------------------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB (2 blocks)
-0x100000 0x17FFFF u-boot env 512KB (1 block)
+0x000000 0x0FFFFF U-Boot img 1MB (2 blocks)
+0x100000 0x17FFFF U-Boot env 512KB (1 block)
0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
0x200000 0x27FFFF CS4315 ucode 512KB (1 block)
@@ -233,8 +233,8 @@ Start End Definition Size
Micro SD Card memory Map on T2080RDB
----------------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot img 1MB
-0x800 0016 u-boot env 8KB
+0x008 2048 U-Boot img 1MB
+0x800 0016 U-Boot env 8KB
0x820 0128 FMAN ucode 64KB
0x8a0 0512 CS4315 ucode 256KB
@@ -242,8 +242,8 @@ Block #blocks Definition Size
SPI Flash memory Map on T2080RDB
----------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB
-0x100000 0x101FFF u-boot env 8KB
+0x000000 0x0FFFFF U-Boot img 1MB
+0x100000 0x101FFF U-Boot env 8KB
0x110000 0x11FFFF FMAN ucode 64KB
0x120000 0x15FFFF CS4315 ucode 256KB
diff --git a/board/freescale/t4qds/README b/board/freescale/t4qds/README
index 3962fee7f2..bf238146db 100644
--- a/board/freescale/t4qds/README
+++ b/board/freescale/t4qds/README
@@ -86,7 +86,7 @@ Board Features
10GBASE-KR scenario.
So, for XFI usage, there are two scenarios, one will use fiber cable,
another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
- introduced to indicate a XFI port will use copper cable, and U-boot
+ introduced to indicate a XFI port will use copper cable, and U-Boot
will fixup the dtb accordingly.
It's used as: fsl_10gkr_copper:<10g_mac_name>
The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2, they
@@ -118,7 +118,7 @@ The physical address of the last (boot page translation) varies with the actual
Voltage ID and VDD override
--------------------
-T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage
+T4240 has a VID feature. U-Boot reads the VID efuses and adjust the voltage
accordingly. The voltage can also be override by command vdd_override. The
syntax is
@@ -144,8 +144,8 @@ Users can set the final voltage directly.
-------------------------------
PBL initializes the internal SRAM and copy SPL(160K) in SRAM.
SPL further initialise DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -165,21 +165,21 @@ Run time view of SPL framework
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
-|U-boot SPL | 0xFFFD8000 (160KB) |
+|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T4QDS
--------------------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB
-0x140000 0x15FFFF u-boot env 128KB
+0x000000 0x0FFFFF U-Boot img 1MB
+0x140000 0x15FFFF U-Boot env 128KB
0x160000 0x17FFFF FMAN Ucode 128KB
Micro SD Card memory Map on T4QDS
----------------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot img 1MB
-0x800 0016 u-boot env 8KB
+0x008 2048 U-Boot img 1MB
+0x800 0016 U-Boot env 8KB
0x820 0128 FMAN ucode 64KB
Switch Settings: (ON is 1, OFF is 0)
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index 83a3a9bba2..95f8c04e4d 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -658,7 +658,7 @@ int board_eth_init(bd_t *bis)
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) {
- /* A fake PHY address to make U-boot happy */
+ /* A fake PHY address to make U-Boot happy */
fm_info_set_phy_address(i, i);
} else {
lane = serdes_get_first_lane(FSL_SRDS_1,
@@ -839,7 +839,7 @@ int board_eth_init(bd_t *bis)
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) {
- /* A fake PHY address to make U-boot happy */
+ /* A fake PHY address to make U-Boot happy */
fm_info_set_phy_address(i, i);
} else {
lane = serdes_get_first_lane(FSL_SRDS_2,
OpenPOWER on IntegriCloud