Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

7 files changed, 46 insertions, 11 deletions

diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 1929bba20b..06d908658d 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -241,6 +241,8 @@ static void initialize_lane_to_slot(void)
 		break;
 	case 0xA7:
 		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 6;
+		lane_to_slot[3] = 5;
 		lane_to_slot[7] = 7;
 		break;
 	case 0xAA:
@@ -410,6 +412,8 @@ void t1040_handle_phy_interface_sgmii(int i)
 			fm_info_set_phy_address(i, riser_phy_addr[1]);
 		if (FM1_DTSEC3 == i)
 			fm_info_set_phy_address(i, riser_phy_addr[2]);
+		if (FM1_DTSEC5 == i)
+			fm_info_set_phy_address(i, riser_phy_addr[3]);
 
 		mdio_mux[i] = EMI1_SLOT7;
 		fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
index a4775c02e6..b61e1c0254 100644
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ b/board/freescale/t104xrdb/MAINTAINERS
@@ -6,6 +6,7 @@ F:	include/configs/T104xRDB.h
 F:	configs/T1040RDB_defconfig
 F:	configs/T1040RDB_NAND_defconfig
 F:	configs/T1040RDB_SPIFLASH_defconfig
+F:	configs/T1042RDB_defconfig
 F:	configs/T1042RDB_PI_defconfig
 F:	configs/T1042RDB_PI_NAND_defconfig
 F:	configs/T1042RDB_PI_SPIFLASH_defconfig
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index cdbe1fafd9..ac95b5e509 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -4,10 +4,23 @@ The T1040RDB is a Freescale reference board that hosts the T1040 SoC
 (and variants). Variants inclued T1042 presonality of T1040, in which
 case T1040RDB can also be called T1042RDB.
 
+The T1042RDB is a Freescale reference board that hosts the T1042 SoC
+(and variants). The board is similar to T1040RDB, T1040 is a reduced
+personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
+
 The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
 (a personality of T1040 SoC). The board is similar to T1040RDB but is
 designed specially with low power features targeted for Printing Image Market.
 
+Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
+-------------------------------------------------------------------------
+Board		Si		Protocol		Targeted Market
+-------------------------------------------------------------------------
+T1040RDB	T1040		0x66                    Networking
+T1040RDB	T1042		0x86                    Networking
+T1042RDB_PI	T1042		0x06                    Printing & Imaging
+
+
 T1040 SoC Overview
 ------------------
 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
@@ -194,10 +207,10 @@ The below commands apply to the board
    Commands for switching to alternate bank.
 
 	1. To change from vbank0 to vbank4
-		=> qixis_reset altbank (it will boot using vbank4)
+		=> cpld reset altbank (it will boot using vbank4)
 
 	2.To change from vbank4 to vbank0
-		=> qixis reset (it will boot using vbank0)
+		=> cpld reset (it will boot using vbank0)
 
 NAND boot with 2 Stage boot loader
 ----------------------------------
@@ -259,15 +272,15 @@ Switch Settings: (ON is 0, OFF is 1)
 ===============
 NAND boot SW setting:
 SW1: 10001000
-SW2: 00111001
+SW2: 00111011
 SW3: 11110001
 
 SPI boot SW setting:
 SW1: 00100010
-SW2: 10111001
+SW2: 10111011
 SW3: 11100001
 
 SD boot SW setting:
 SW1: 00100000
-SW2: 00111001
+SW2: 00111011
 SW3: 11100001
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index 34c9224adb..2c331eebf9 100644
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -105,8 +105,8 @@ found:
 	popts->zq_en = 1;
 
 	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
 }
 
 phys_size_t initdram(int board_type)
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index 63e5f900da..c8b6c672a6 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -43,6 +43,16 @@ int board_eth_init(bd_t *bis)
 						CONFIG_SYS_SGMII1_PHY_ADDR);
 			break;
 #endif
+#ifdef CONFIG_T1042RDB
+		case PHY_INTERFACE_MODE_SGMII:
+			/* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */
+			if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i))
+				fm_info_set_phy_address(i, 0);
+			/* T1042RDB only supports SGMII on DTSEC3 */
+			fm_info_set_phy_address(FM1_DTSEC3,
+						CONFIG_SYS_SGMII1_PHY_ADDR);
+			break;
+#endif
 		case PHY_INTERFACE_MODE_RGMII:
 			if (FM1_DTSEC4 == i)
 				phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
diff --git a/board/freescale/t104xrdb/t1042_pi_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_rcw.cfg
new file mode 100644
index 0000000000..57de89ad0e
--- /dev/null
+++ b/board/freescale/t104xrdb/t1042_pi_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x06
+0c18000e 0e000000 00000000 00000000
+06000002 00400002 e8106000 01000000
+00000000 00000000 00000000 00030810
+00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_rcw.cfg b/board/freescale/t104xrdb/t1042_rcw.cfg
index a3ea8ada56..db4d52f397 100644
--- a/board/freescale/t104xrdb/t1042_rcw.cfg
+++ b/board/freescale/t104xrdb/t1042_rcw.cfg
@@ -1,7 +1,7 @@
 #PBL preamble and RCW header
 aa55aa55 010e0100
-# serdes protocol 0x66
+# serdes protocol 0x86
 0c18000e 0e000000 00000000 00000000
-06000002 00400002 e8106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
+86000002 80000002 ec027000 01000000
+00000000 00000000 00000000 00032810
+00000000 0342500f 00000000 00000000