mpc8xx: remove ESTEEM192E board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Conn Clark <clark@esteem.com>

6 files changed, 0 insertions, 1457 deletions

diff --git a/board/esteem192e/Kconfig b/board/esteem192e/Kconfig
deleted file mode 100644
index f895bc4f24..0000000000
--- a/board/esteem192e/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_ESTEEM192E
-
-config SYS_BOARD
-	default "esteem192e"
-
-config SYS_CONFIG_NAME
-	default "ESTEEM192E"
-
-endif
diff --git a/board/esteem192e/MAINTAINERS b/board/esteem192e/MAINTAINERS
deleted file mode 100644
index 8d6634c657..0000000000
--- a/board/esteem192e/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ESTEEM192E BOARD
-M:	Conn Clark <clark@esteem.com>
-S:	Maintained
-F:	board/esteem192e/
-F:	include/configs/ESTEEM192E.h
-F:	configs/ESTEEM192E_defconfig
diff --git a/board/esteem192e/Makefile b/board/esteem192e/Makefile
deleted file mode 100644
index 55d80b6874..0000000000
--- a/board/esteem192e/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= esteem192e.o flash.o
diff --git a/board/esteem192e/esteem192e.c b/board/esteem192e/esteem192e.c
deleted file mode 100644
index b54c61412a..0000000000
--- a/board/esteem192e/esteem192e.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Modified By Conn Clark to work with Esteem 192E 7/31/00
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 *
-	 * active, NOP, read, precharge, NOP */
-	0x0F27CC04, 0x0EAECC04, 0x00B98C04, 0x00F74C00,
-	0x11FFCC05,		/* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 * NOP, Program
-	 */
-	0x0F0A8C34, 0x1F354C37,	/* last */
-
-	_NOT_USED_,		/* Not used */
-
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 * active, NOP, read, NOP, NOP, NOP, NOP, NOP */
-	0x0F37CC04, 0x0EFECC04, 0x00FDCC04, 0x00FFCC00,
-	0x00FFCC00, 0x01FFCC00, 0x0FFFCC00, 0x1FFFCC05,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 * active, NOP, write, NOP, precharge, NOP */
-	0x0F27CC04, 0x0EAE8C00, 0x01BD4C04, 0x0FFB8C04,
-	0x0FF74C04, 0x1FFFCC05,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 * active, NOP, write, NOP, NOP, NOP, NOP, NOP */
-	0x0F37CC04, 0x0EFE8C00, 0x00FD4C00, 0x00FFCC00,
-	0x00FFCC00, 0x01FFCC04, 0x0FFFCC04, 0x1FFFCC05,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 * precharge, NOP, auto_ref, NOP, NOP, NOP */
-	0x0FF74C34, 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34,
-	0x0FFFCCB4, 0x1FFFCC35,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x0FFB8C00, 0x1FF74C03,	/* last */
-	_NOT_USED_, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: Esteem 192E\n");
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0, size_b1;
-
-	/*
-	 * Explain frequency of refresh here
-	 */
-
-	memctl->memc_mptpr = 0x0200;	/* divide by 32 */
-
-	memctl->memc_mamr = 0x18003112;	/*CONFIG_SYS_MAMR_8COL; */ /* 0x18005112 TODO: explain here */
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Map cs 2 and 3 to the SDRAM banks 0 and 1 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;	/* not defined yet */
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
-
-	/* perform SDRAM initializsation sequence */
-	memctl->memc_mar = 0x00000088;
-	memctl->memc_mcr = 0x80004830;	/* SDRAM bank 0 execute 8 refresh */
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
-
-	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 1 execute 8 refresh */
-	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;	/* 0x18803112  start refresh timer TODO: explain here */
-
-/* printf ("banks 0 and 1 are programed\n"); */
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 */
-	size_b0 = get_ram_size ( (long *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
-	size_b1 = get_ram_size ( (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
-
-	printf ("\nbank 0 size %lu\nbank 1 size %lu\n", size_b0, size_b1);
-
-/* printf ("bank 1 size %u\n",size_b1); */
-
-	if (size_b1 == 0) {
-		/*
-		 * Adjust refresh rate if bank 0 isn't stuffed
-		 */
-		memctl->memc_mptpr = 0x0400;	/* divide by 64 */
-		memctl->memc_br3 &= 0x0FFFFFFFE;
-
-		/*
-		 * Adjust OR2 for size of bank 0
-		 */
-		memctl->memc_or2 |= 7 * size_b0;
-	} else {
-		if (size_b0 < size_b1) {
-			memctl->memc_br2 &= 0x00007FFE;
-			memctl->memc_br3 &= 0x00007FFF;
-
-			/*
-			 * Adjust OR3 for size of bank 1
-			 */
-			memctl->memc_or3 |= 15 * size_b1;
-
-			/*
-			 * Adjust OR2 for size of bank 0
-			 */
-			memctl->memc_or2 |= 15 * size_b0;
-			memctl->memc_br2 += (size_b1 + 1);
-		} else {
-			memctl->memc_br3 &= 0x00007FFE;
-
-			/*
-			 * Adjust OR2 for size of bank 0
-			 */
-			memctl->memc_or2 |= 15 * size_b0;
-
-			/*
-			 * Adjust OR3 for size of bank 1
-			 */
-			memctl->memc_or3 |= 15 * size_b1;
-			memctl->memc_br3 += (size_b0 + 1);
-		}
-	}
-
-	/* before leaving set all unused i/o pins to outputs */
-
-	/*
-	 *      --*Unused Pin List*--
-	 *
-	 * group/port           bit number
-	 * IP_B                 0,1,3,4,5  Taken care of in pcmcia-cs-x.x.xx
-	 * PA                   5,7,8,9,14,15
-	 * PB                   22,23,31
-	 * PC                   4,5,6,7,10,11,12,13,14,15
-	 * PD                   5,6,7
-	 *
-	 */
-
-	/*
-	 *   --*Pin Used for I/O List*--
-	 *
-	 * port     input bit number    output bit number    either
-	 * PB                           18,26,27
-	 * PD       3,4                                      8,9,10,11,12,13,14,15
-	 *
-	 */
-
-	immap->im_ioport.iop_papar &= ~0x05C3;	/* set pins as io */
-	immap->im_ioport.iop_padir |= 0x05C3;	/* set pins as output */
-	immap->im_ioport.iop_paodr &= 0x0008;	/* config pins 9 & 14 as normal outputs */
-	immap->im_ioport.iop_padat |= 0x05C3;	/* set unused pins as high */
-
-	immap->im_cpm.cp_pbpar &= ~0x00001331;	/* set unused port b pins as io */
-	immap->im_cpm.cp_pbdir |= 0x00001331;	/* set unused port b pins as output */
-	immap->im_cpm.cp_pbodr &= ~0x00001331;	/* config bits 18,22,23,26,27 & 31 as normal outputs */
-	immap->im_cpm.cp_pbdat |= 0x00001331;	/* set T/E LED, /NV_CS, & /POWER_ADJ_CS and the rest to a high */
-
-	immap->im_ioport.iop_pcpar &= ~0x0F3F;	/* set unused port c pins as io */
-	immap->im_ioport.iop_pcdir |= 0x0F3F;	/* set unused port c pins as output */
-	immap->im_ioport.iop_pcso &= ~0x0F3F;	/* clear special purpose bit for unused port c pins for clarity */
-	immap->im_ioport.iop_pcdat |= 0x0F3F;	/* set unused port c pins high */
-
-	immap->im_ioport.iop_pdpar &= 0xE000;	/* set pins as io */
-	immap->im_ioport.iop_pddir &= 0xE000;	/* set bit 3 & 4 as inputs */
-	immap->im_ioport.iop_pddir |= 0x07FF;	/* set bits 5 - 15 as outputs */
-	immap->im_ioport.iop_pddat = 0x0055;	/* set alternating pattern on test port */
-
-	return (size_b0 + size_b1);
-}
diff --git a/board/esteem192e/flash.c b/board/esteem192e/flash.c
deleted file mode 100644
index a121104ca8..0000000000
--- a/board/esteem192e/flash.c
+++ /dev/null
@@ -1,1119 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
-
-#ifdef CONFIG_FLASH_16BIT
-#define FLASH_WORD_SIZE	unsigned short
-#define	FLASH_ID_MASK	0xFFFF
-#else
-#define FLASH_WORD_SIZE unsigned long
-#define	FLASH_ID_MASK	0xFFFFFFFF
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-ulong flash_get_size (volatile FLASH_WORD_SIZE * addr, flash_info_t * info);
-
-#ifndef CONFIG_FLASH_16BIT
-static int write_word (flash_info_t * info, ulong dest, ulong data);
-#else
-static int write_short (flash_info_t * info, ulong dest, ushort data);
-#endif
-/*int flash_write (uchar *, ulong, ulong); */
-/*flash_info_t *addr2info (ulong);   */
-
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 =
-		flash_get_size ((volatile FLASH_WORD_SIZE *)
-				FLASH_BASE0_PRELIM, &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size_b0, size_b0 << 20);
-	}
-
-	size_b1 =
-		flash_get_size ((volatile FLASH_WORD_SIZE *)
-				FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	if (size_b1 > size_b0) {
-		printf ("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1 << 20, size_b0, size_b0 << 20);
-		flash_info[0].flash_id = FLASH_UNKNOWN;
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[0].sector_count = -1;
-		flash_info[1].sector_count = -1;
-		flash_info[0].size = 0;
-		flash_info[1].size = 0;
-		return (0);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = CONFIG_SYS_FLASH_BASE | 0x00000801;	/*  (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; */
-
-	/* Re-do sizing to get full correct info */
-
-	size_b0 = flash_get_size ((volatile FLASH_WORD_SIZE *) CONFIG_SYS_FLASH_BASE,
-				  &flash_info[0]);
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	(void) flash_protect (FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-			      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-		memctl->memc_or1 =
-			CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 =
-			(CONFIG_SYS_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
-		/*((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
-		   BR_MS_GPCM | BR_V; */
-
-		/* Re-do sizing to get full correct info */
-		size_b1 =
-			flash_get_size ((volatile FLASH_WORD_SIZE
-					 *) (CONFIG_SYS_FLASH_BASE + size_b0),
-					&flash_info[1]);
-
-		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      CONFIG_SYS_MONITOR_BASE,
-				      CONFIG_SYS_MONITOR_BASE + monitor_flash_len -
-				      1, &flash_info[1]);
-#endif
-	} else {
-		memctl->memc_br1 = 0;	/* invalidate bank */
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start adress table */
-	if (info->flash_id & FLASH_BTYPE) {
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-
-#ifndef CONFIG_FLASH_16BIT
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00008000;
-			info->start[3] = base + 0x0000C000;
-			info->start[4] = base + 0x00010000;
-			info->start[5] = base + 0x00014000;
-			info->start[6] = base + 0x00018000;
-			info->start[7] = base + 0x0001C000;
-			for (i = 8; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00020000) - 0x000E0000;
-			}
-		} else {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00008000;
-			info->start[2] = base + 0x0000C000;
-			info->start[3] = base + 0x00010000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00020000) - 0x00060000;
-			}
-		}
-#else
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00002000;
-			info->start[2] = base + 0x00004000;
-			info->start[3] = base + 0x00006000;
-			info->start[4] = base + 0x00008000;
-			info->start[5] = base + 0x0000A000;
-			info->start[6] = base + 0x0000C000;
-			info->start[7] = base + 0x0000E000;
-			for (i = 8; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00010000) - 0x00070000;
-			}
-		} else {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00010000) - 0x00030000;
-			}
-		}
-#endif
-	} else {
-		/* set sector offsets for top boot block type           */
-		i = info->sector_count - 1;
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-
-#ifndef CONFIG_FLASH_16BIT
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x00010000;
-			info->start[i--] = base + info->size - 0x00014000;
-			info->start[i--] = base + info->size - 0x00018000;
-			info->start[i--] = base + info->size - 0x0001C000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00020000;
-			}
-
-		} else {
-
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x00010000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00020000;
-			}
-		}
-#else
-			info->start[i--] = base + info->size - 0x00002000;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000A000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x0000E000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-
-		} else {
-
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-#endif
-	}
-
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-	uchar *boottype;
-	uchar botboot[] = ", bottom boot sect)\n";
-	uchar topboot[] = ", top boot sector)\n";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf ("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf ("FUJITSU ");
-		break;
-	case FLASH_MAN_SST:
-		printf ("SST ");
-		break;
-	case FLASH_MAN_STM:
-		printf ("STM ");
-		break;
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	if (info->flash_id & 0x0001) {
-		boottype = botboot;
-	} else {
-		boottype = topboot;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:
-		printf ("AM29LV400B (4 Mbit%s", boottype);
-		break;
-	case FLASH_AM400T:
-		printf ("AM29LV400T (4 Mbit%s", boottype);
-		break;
-	case FLASH_AM800B:
-		printf ("AM29LV800B (8 Mbit%s", boottype);
-		break;
-	case FLASH_AM800T:
-		printf ("AM29LV800T (8 Mbit%s", boottype);
-		break;
-	case FLASH_AM160B:
-		printf ("AM29LV160B (16 Mbit%s", boottype);
-		break;
-	case FLASH_AM160T:
-		printf ("AM29LV160T (16 Mbit%s", boottype);
-		break;
-	case FLASH_AM320B:
-		printf ("AM29LV320B (32 Mbit%s", boottype);
-		break;
-	case FLASH_AM320T:
-		printf ("AM29LV320T (32 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL800B:
-		printf ("INTEL28F800B (8 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL800T:
-		printf ("INTEL28F800T (8 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL160B:
-		printf ("INTEL28F160B (16 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL160T:
-		printf ("INTEL28F160T (16 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL320B:
-		printf ("INTEL28F320B (32 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL320T:
-		printf ("INTEL28F320T (32 Mbit%s", boottype);
-		break;
-
-#if 0				/* enable when devices are available */
-
-	case FLASH_INTEL640B:
-		printf ("INTEL28F640B (64 Mbit%s", boottype);
-		break;
-	case FLASH_INTEL640T:
-		printf ("INTEL28F640T (64 Mbit%s", boottype);
-		break;
-#endif
-
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size (volatile FLASH_WORD_SIZE * addr, flash_info_t * info)
-{
-	short i;
-	ulong base = (ulong) addr;
-	FLASH_WORD_SIZE value;
-
-	/* Write auto select command: read Manufacturer ID */
-
-
-#ifndef CONFIG_FLASH_16BIT
-
-	/*
-	 * Note: if it is an AMD flash and the word at addr[0000]
-	 * is 0x00890089 this routine will think it is an Intel
-	 * flash device and may(most likely) cause trouble.
-	 */
-
-	addr[0x0000] = 0x00900090;
-	if (addr[0x0000] != 0x00890089) {
-		addr[0x0555] = 0x00AA00AA;
-		addr[0x02AA] = 0x00550055;
-		addr[0x0555] = 0x00900090;
-#else
-
-	/*
-	 * Note: if it is an AMD flash and the word at addr[0000]
-	 * is 0x0089 this routine will think it is an Intel
-	 * flash device and may(most likely) cause trouble.
-	 */
-
-	addr[0x0000] = 0x0090;
-
-	if (addr[0x0000] != 0x0089) {
-		addr[0x0555] = 0x00AA;
-		addr[0x02AA] = 0x0055;
-		addr[0x0555] = 0x0090;
-#endif
-	}
-	value = addr[0];
-
-	switch (value) {
-	case (AMD_MANUFACT & FLASH_ID_MASK):
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FUJ_MANUFACT & FLASH_ID_MASK):
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (STM_MANUFACT & FLASH_ID_MASK):
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	case (SST_MANUFACT & FLASH_ID_MASK):
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case (INTEL_MANUFACT & FLASH_ID_MASK):
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);	/* no or unknown flash  */
-
-	}
-
-	value = addr[1];	/* device ID            */
-
-	switch (value) {
-
-	case (AMD_ID_LV400T & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (AMD_ID_LV400B & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (AMD_ID_LV800T & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	case (AMD_ID_LV800B & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	case (AMD_ID_LV160T & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-
-	case (AMD_ID_LV160B & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-#if 0				/* enable when device IDs are available */
-	case (AMD_ID_LV320T & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;		/* => 8 MB              */
-
-	case (AMD_ID_LV320B & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;		/* => 8 MB              */
-#endif
-
-	case (INTEL_ID_28F800B3T & FLASH_ID_MASK):
-		info->flash_id += FLASH_INTEL800T;
-		info->sector_count = 23;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	case (INTEL_ID_28F800B3B & FLASH_ID_MASK):
-		info->flash_id += FLASH_INTEL800B;
-		info->sector_count = 23;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	case (INTEL_ID_28F160B3T & FLASH_ID_MASK):
-		info->flash_id += FLASH_INTEL160T;
-		info->sector_count = 39;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-
-	case (INTEL_ID_28F160B3B & FLASH_ID_MASK):
-		info->flash_id += FLASH_INTEL160B;
-		info->sector_count = 39;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-
-	case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
-		info->flash_id += FLASH_INTEL320T;
-		info->sector_count = 71;
-		info->size = 0x00800000;
-		break;		/* => 8 MB              */
-
-	case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 71;
-		info->size = 0x00800000;
-		break;		/* => 8 MB              */
-
-#if 0				/* enable when devices are available */
-	case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
-		info->flash_id += FLASH_INTEL320T;
-		info->sector_count = 135;
-		info->size = 0x01000000;
-		break;		/* => 16 MB             */
-
-	case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 135;
-		info->size = 0x01000000;
-		break;		/* => 16 MB             */
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);	/* => no or unknown flash */
-
-	}
-
-	/* set up sector start adress table */
-	if (info->flash_id & FLASH_BTYPE) {
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-
-#ifndef CONFIG_FLASH_16BIT
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00008000;
-			info->start[3] = base + 0x0000C000;
-			info->start[4] = base + 0x00010000;
-			info->start[5] = base + 0x00014000;
-			info->start[6] = base + 0x00018000;
-			info->start[7] = base + 0x0001C000;
-			for (i = 8; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00020000) - 0x000E0000;
-			}
-		} else {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00008000;
-			info->start[2] = base + 0x0000C000;
-			info->start[3] = base + 0x00010000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00020000) - 0x00060000;
-			}
-		}
-#else
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00002000;
-			info->start[2] = base + 0x00004000;
-			info->start[3] = base + 0x00006000;
-			info->start[4] = base + 0x00008000;
-			info->start[5] = base + 0x0000A000;
-			info->start[6] = base + 0x0000C000;
-			info->start[7] = base + 0x0000E000;
-			for (i = 8; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00010000) - 0x00070000;
-			}
-		} else {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] =
-					base + (i * 0x00010000) - 0x00030000;
-			}
-		}
-#endif
-	} else {
-		/* set sector offsets for top boot block type           */
-		i = info->sector_count - 1;
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-
-#ifndef CONFIG_FLASH_16BIT
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x00010000;
-			info->start[i--] = base + info->size - 0x00014000;
-			info->start[i--] = base + info->size - 0x00018000;
-			info->start[i--] = base + info->size - 0x0001C000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00020000;
-			}
-
-		} else {
-
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x00010000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00020000;
-			}
-		}
-#else
-			info->start[i--] = base + info->size - 0x00002000;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000A000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x0000E000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-
-		} else {
-
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-#endif
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile FLASH_WORD_SIZE *) info->start[0];
-		if ((info->flash_id & 0xFF00) == FLASH_MAN_INTEL) {
-			*addr = (0x00F000F0 & FLASH_ID_MASK);	/* reset bank */
-		} else {
-			*addr = (0x00FF00FF & FLASH_ID_MASK);	/* reset bank */
-		}
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-
-	volatile FLASH_WORD_SIZE *addr =
-		(volatile FLASH_WORD_SIZE *) (info->start[0]);
-	int flag, prot, sect, l_sect, barf;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    ((info->flash_id > FLASH_AMD_COMP) &&
-	     ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL))) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-	if (info->flash_id < FLASH_AMD_COMP) {
-#ifndef CONFIG_FLASH_16BIT
-		addr[0x0555] = 0x00AA00AA;
-		addr[0x02AA] = 0x00550055;
-		addr[0x0555] = 0x00800080;
-		addr[0x0555] = 0x00AA00AA;
-		addr[0x02AA] = 0x00550055;
-#else
-		addr[0x0555] = 0x00AA;
-		addr[0x02AA] = 0x0055;
-		addr[0x0555] = 0x0080;
-		addr[0x0555] = 0x00AA;
-		addr[0x02AA] = 0x0055;
-#endif
-		/* Start erase on unprotected sectors */
-		for (sect = s_first; sect <= s_last; sect++) {
-			if (info->protect[sect] == 0) {	/* not protected */
-				addr = (volatile FLASH_WORD_SIZE *) (info->start[sect]);
-				addr[0] = (0x00300030 & FLASH_ID_MASK);
-				l_sect = sect;
-			}
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* wait at least 80us - let's wait 1 ms */
-		udelay (1000);
-
-		/*
-		 * We wait for the last triggered sector
-		 */
-		if (l_sect < 0)
-			goto DONE;
-
-		start = get_timer (0);
-		last = start;
-		addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
-		while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
-		       (0x00800080 & FLASH_ID_MASK)) {
-			if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-				return 1;
-			}
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				serial_putc ('.');
-				last = now;
-			}
-		}
-
-	      DONE:
-		/* reset to read mode */
-		addr = (volatile FLASH_WORD_SIZE *) info->start[0];
-		addr[0] = (0x00F000F0 & FLASH_ID_MASK);	/* reset bank */
-	} else {
-
-
-		for (sect = s_first; sect <= s_last; sect++) {
-			if (info->protect[sect] == 0) {	/* not protected */
-				barf = 0;
-#ifndef CONFIG_FLASH_16BIT
-				addr = (vu_long *) (info->start[sect]);
-				addr[0] = 0x00200020;
-				addr[0] = 0x00D000D0;
-				while (!(addr[0] & 0x00800080));	/* wait for error or finish */
-				if (addr[0] & 0x003A003A) {	/* check for error */
-					barf = addr[0] & 0x003A0000;
-					if (barf) {
-						barf >>= 16;
-					} else {
-						barf = addr[0] & 0x0000003A;
-					}
-				}
-#else
-				addr = (vu_short *) (info->start[sect]);
-				addr[0] = 0x0020;
-				addr[0] = 0x00D0;
-				while (!(addr[0] & 0x0080));	/* wait for error or finish */
-				if (addr[0] & 0x003A)	/* check for error */
-					barf = addr[0] & 0x003A;
-#endif
-				if (barf) {
-					printf ("\nFlash error in sector at %lx\n", (unsigned long) addr);
-					if (barf & 0x0002)
-						printf ("Block locked, not erased.\n");
-					if ((barf & 0x0030) == 0x0030)
-						printf ("Command Sequence error.\n");
-					if ((barf & 0x0030) == 0x0020)
-						printf ("Block Erase error.\n");
-					if (barf & 0x0008)
-						printf ("Vpp Low error.\n");
-					rcode = 1;
-				} else
-					printf (".");
-				l_sect = sect;
-			}
-			addr = (volatile FLASH_WORD_SIZE *) info->start[0];
-			addr[0] = (0x00FF00FF & FLASH_ID_MASK);	/* reset bank */
-
-		}
-
-	}
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-#ifndef CONFIG_FLASH_16BIT
-	ulong cp, wp, data;
-	int l;
-#else
-	ulong cp, wp;
-	ushort data;
-#endif
-	int i, rc;
-
-#ifndef CONFIG_FLASH_16BIT
-
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_word (info, wp, data));
-
-#else
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start byte
-	 */
-	if (addr - wp) {
-		data = 0;
-		data = (data << 8) | *src++;
-		--cnt;
-		if ((rc = write_short (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-/*	l = 0; used for debuging  */
-	while (cnt >= 2) {
-		data = 0;
-		for (i = 0; i < 2; ++i) {
-			data = (data << 8) | *src++;
-		}
-
-/*		if(!l){
-			printf("%x",data);
-			l = 1;
-		}  used for debuging */
-
-		if ((rc = write_short (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 2; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_short (info, wp, data));
-
-
-#endif
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-#ifndef CONFIG_FLASH_16BIT
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *) (info->start[0]);
-	ulong start, barf;
-	int flag;
-
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *) dest) & data) != data) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	if (info->flash_id > FLASH_AMD_COMP) {
-		/* AMD stuff */
-		addr[0x0555] = 0x00AA00AA;
-		addr[0x02AA] = 0x00550055;
-		addr[0x0555] = 0x00A000A0;
-	} else {
-		/* intel stuff */
-		*addr = 0x00400040;
-	}
-	*((vu_long *) dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-
-	if (info->flash_id > FLASH_AMD_COMP) {
-
-		while ((*((vu_long *) dest) & 0x00800080) !=
-		       (data & 0x00800080)) {
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-
-	} else {
-
-		while (!(addr[0] & 0x00800080)) {	/* wait for error or finish */
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-
-			if (addr[0] & 0x003A003A) {	/* check for error */
-				barf = addr[0] & 0x003A0000;
-				if (barf) {
-					barf >>= 16;
-				} else {
-					barf = addr[0] & 0x0000003A;
-				}
-				printf ("\nFlash write error at address %lx\n", (unsigned long) dest);
-				if (barf & 0x0002)
-					printf ("Block locked, not erased.\n");
-				if (barf & 0x0010)
-					printf ("Programming error.\n");
-				if (barf & 0x0008)
-					printf ("Vpp Low error.\n");
-				return (2);
-			}
-
-
-		}
-
-		return (0);
-
-	}
-
-#else
-
-static int write_short (flash_info_t * info, ulong dest, ushort data)
-{
-	vu_short *addr = (vu_short *) (info->start[0]);
-	ulong start, barf;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_short *) dest) & data) != data) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	if (info->flash_id < FLASH_AMD_COMP) {
-		/* AMD stuff */
-		addr[0x0555] = 0x00AA;
-		addr[0x02AA] = 0x0055;
-		addr[0x0555] = 0x00A0;
-	} else {
-		/* intel stuff */
-		*addr = 0x00D0;
-		*addr = 0x0040;
-	}
-	*((vu_short *) dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-
-	if (info->flash_id < FLASH_AMD_COMP) {
-		/* AMD stuff */
-		while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-
-	} else {
-		/* intel stuff */
-		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return (1);
-		}
-
-		if (addr[0] & 0x003A) {	/* check for error */
-			barf = addr[0] & 0x003A;
-			printf ("\nFlash write error at address %lx\n",
-				(unsigned long) dest);
-			if (barf & 0x0002)
-				printf ("Block locked, not erased.\n");
-			if (barf & 0x0010)
-				printf ("Programming error.\n");
-			if (barf & 0x0008)
-				printf ("Vpp Low error.\n");
-			return (2);
-		}
-		*addr = 0x00B0;
-		*addr = 0x0070;
-		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return (1);
-		}
-		*addr = 0x00FF;
-	}
-	return (0);
-}
-
-#endif
-/*-----------------------------------------------------------------------*/
diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds
deleted file mode 100644
index 59a86bfdc0..0000000000
--- a/board/esteem192e/u-boot.lds
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    net/built-in.o			(.text*)
-    board/esteem192e/built-in.o		(.text*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}