ppc/arm: zap EMK boards

The following bard configurations have been without active maintenance
for a long time, and the board maintainer agrees to have them removed:

MPC5200:	TOP5200, MINI5200, EVAL5200
MPC860:		TOP860
at91sam9xeXXX:	top9000eval_xe, top9000su_xe

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
[trini: Add missing Kconfig removals]
Signed-off-by: Tom Rini <trini@ti.com>

5 files changed, 0 insertions, 273 deletions

diff --git a/board/emk/top860/Kconfig b/board/emk/top860/Kconfig
deleted file mode 100644
index 7b5afdadfc..0000000000
--- a/board/emk/top860/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TOP860
-
-config SYS_BOARD
-	default "top860"
-
-config SYS_VENDOR
-	default "emk"
-
-config SYS_CONFIG_NAME
-	default "TOP860"
-
-endif
diff --git a/board/emk/top860/MAINTAINERS b/board/emk/top860/MAINTAINERS
deleted file mode 100644
index 3676acab9b..0000000000
--- a/board/emk/top860/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TOP860 BOARD
-M:	Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
-S:	Maintained
-F:	board/emk/top860/
-F:	include/configs/TOP860.h
-F:	configs/TOP860_defconfig
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
deleted file mode 100644
index 0401639ce3..0000000000
--- a/board/emk/top860/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= top860.o ../common/flash.o ../common/vpd.o ../common/am79c874.o
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
deleted file mode 100644
index 32c77f84e7..0000000000
--- a/board/emk/top860/top860.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * (C) Copyright 2003
- * EMK Elektronik GmbH <www.emk-elektronik.de>
- * Reinhard Meyer <r.meyer@emk-elektronik.de>
- *
- * Board specific routines for the TOP860
- *
- * - initialisation
- * - interface to VPD data (mac address, clock speeds)
- * - memory controller
- * - serial io initialisation
- * - ethernet io initialisation
- *
- * -----------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <mpc8xx.h>
-#include <asm/io.h>
-
-/*****************************************************************************
- * UPM table for 60ns EDO RAM at 25 MHz bus/external clock
- *****************************************************************************/
-static const uint edo_60ns_25MHz_tbl[] = {
-
-/* single read   (offset 0x00 in upm ram) */
-    0x0ff3fc04,0x08f3fc04,0x00f3fc04,0x00f3fc00,
-    0x33f7fc07,0xfffffc05,0xfffffc05,0xfffffc05,
-/* burst read    (offset 0x08 in upm ram) */
-    0x0ff3fc04,0x08f3fc04,0x00f3fc0c,0x0ff3fc40,
-    0x0cf3fc04,0x03f3fc48,0x0cf3fc04,0x03f3fc48,
-    0x0cf3fc04,0x03f3fc00,0x3ff7fc07,0xfffffc05,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* single write  (offset 0x18 in upm ram) */
-    0x0ffffc04,0x08fffc04,0x30fffc00,0xf1fffc07,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* burst write   (offset 0x20 in upm ram) */
-    0x0ffffc04,0x08fffc00,0x00fffc04,0x03fffc4c,
-    0x00fffc00,0x07fffc4c,0x00fffc00,0x0ffffc4c,
-    0x00fffc00,0x3ffffc07,0xfffffc05,0xfffffc05,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* refresh       (offset 0x30 in upm ram) */
-    0xc0fffc04,0x07fffc04,0x0ffffc04,0x0ffffc04,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
-/* exception     (offset 0x3C in upm ram) */
-    0xfffffc07,0xfffffc03,0xfffffc05,0xfffffc05,
-};
-
-/*****************************************************************************
- * Print Board Identity
- *****************************************************************************/
-int checkboard (void)
-{
-	puts ("Board:"CONFIG_IDENT_STRING"\n");
-	return (0);
-}
-
-/*****************************************************************************
- * Initialize DRAM controller
- *****************************************************************************/
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/*
-	 * Only initialize memory controller when running from FLASH.
-	 * When running from RAM, don't touch it.
-	 */
-	if ((ulong) initdram & 0xff000000) {
-		volatile uint *addr1, *addr2;
-		uint i;
-
-		upmconfig (UPMA, (uint *) edo_60ns_25MHz_tbl,
-			   sizeof (edo_60ns_25MHz_tbl) / sizeof (uint));
-		memctl->memc_mptpr = 0x0200;
-		memctl->memc_mamr = 0x0ca20330;
-		memctl->memc_or2 = -CONFIG_SYS_DRAM_MAX | OR_CSNT_SAM;
-		memctl->memc_br2 = CONFIG_SYS_DRAM_BASE | BR_MS_UPMA | BR_V;
-		/*
-		 * Do 8 read accesses to DRAM
-		 */
-		addr1 = (volatile uint *) 0;
-		addr2 = (volatile uint *) 0x00400000;
-		for (i = 0; i < 8; i++)
-			in_be32(addr1);
-
-		/*
-		 * Now check whether we got 4MB or 16MB populated
-		 */
-		addr1[0] = 0x12345678;
-		addr1[1] = 0x9abcdef0;
-		addr2[0] = 0xfeedc0de;
-		addr2[1] = 0x47110815;
-		if (addr1[0] == 0xfeedc0de && addr1[1] == 0x47110815) {
-			/* only 4MB populated */
-			memctl->memc_or2 = -(CONFIG_SYS_DRAM_MAX / 4) | OR_CSNT_SAM;
-		}
-	}
-
-	return -(memctl->memc_or2 & 0xffff0000);
-}
-
-/*****************************************************************************
- * prepare for FLASH detection
- *****************************************************************************/
-void flash_preinit(void)
-{
-}
-
-/*****************************************************************************
- * finalize FLASH setup
- *****************************************************************************/
-void flash_afterinit(uint bank, ulong start, ulong size)
-{
-}
-
-/*****************************************************************************
- * otherinits after RAM is there and we are relocated to RAM
- * note: though this is an int function, nobody cares for the result!
- *****************************************************************************/
-int misc_init_r (void)
-{
-	/* read 'factory' part of EEPROM */
-	extern void read_factory_r (void);
-	read_factory_r ();
-
-	return (0);
-}
diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug
deleted file mode 100644
index eec132d38c..0000000000
--- a/board/emk/top860/u-boot.lds.debug
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    arch/powerpc/lib/extable.o	(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}