* Some code cleanup

* Patch by Josef Baumgartner, 10 Feb 2004:
  Fixes for Coldfire port

* Patch by Brad Kemp, 11 Feb 2004:
  Fix CFI flash driver problems

3 files changed, 660 insertions, 648 deletions

diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index c75137ab3e..fc48ed547e 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -37,17 +37,18 @@
  */
 ulong bab7xx_get_bus_freq (void)
 {
-    /*
-     * The GPIO Port 1 on BAB7xx reflects the bus speed.
-     */
-    volatile struct GPIO *gpio = (struct GPIO *)(CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
+	/*
+	 * The GPIO Port 1 on BAB7xx reflects the bus speed.
+	 */
+	volatile struct GPIO *gpio =
+		(struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
 
-    unsigned char data = gpio->dta1;
+	unsigned char data = gpio->dta1;
 
-    if (data & 0x02)
-	return 66666666;
+	if (data & 0x02)
+		return 66666666;
 
-    return 83333333;
+	return 83333333;
 }
 
 /*---------------------------------------------------------------------------*/
@@ -57,24 +58,26 @@ ulong bab7xx_get_bus_freq (void)
  */
 ulong bab7xx_get_gclk_freq (void)
 {
-    static const int pllratio_to_factor[] = {
-	00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, 00,
-    };
+	static const int pllratio_to_factor[] = {
+		00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35,
+			00,
+	};
 
-    return pllratio_to_factor[get_hid1 () >> 28] * (bab7xx_get_bus_freq() / 10);
+	return pllratio_to_factor[get_hid1 () >> 28] *
+		(bab7xx_get_bus_freq () / 10);
 }
 
 /*----------------------------------------------------------------------------*/
 
 int checkcpu (void)
 {
-    uint pvr  = get_pvr();
+	uint pvr = get_pvr ();
 
-    printf ("MPC7xx V%d.%d",(pvr >> 8) & 0xFF, pvr & 0xFF);
-    printf (" at %ld / %ld MHz\n",  bab7xx_get_gclk_freq()/1000000,
-	    bab7xx_get_bus_freq()/1000000);
+	printf ("MPC7xx V%d.%d", (pvr >> 8) & 0xFF, pvr & 0xFF);
+	printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq () / 1000000,
+		bab7xx_get_bus_freq () / 1000000);
 
-    return (0);
+	return (0);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -82,20 +85,20 @@ int checkcpu (void)
 int checkboard (void)
 {
 #ifdef CFG_ADDRESS_MAP_A
-    puts ("Board: ELTEC BAB7xx PReP\n");
+	puts ("Board: ELTEC BAB7xx PReP\n");
 #else
-    puts ("Board: ELTEC BAB7xx CHRP\n");
+	puts ("Board: ELTEC BAB7xx CHRP\n");
 #endif
-    return (0);
+	return (0);
 }
 
 /* ------------------------------------------------------------------------- */
 
 int checkflash (void)
 {
-    /* TODO: XXX XXX XXX */
-    printf ("2 MB ## Test not implemented yet ##\n");
-    return (0);
+	/* TODO: XXX XXX XXX */
+	printf ("2 MB ## Test not implemented yet ##\n");
+	return (0);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -103,77 +106,75 @@ int checkflash (void)
 
 static unsigned int mpc106_read_cfg_dword (unsigned int reg)
 {
-    unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
+	unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
 
-    out32r(MPC106_REG_ADDR, reg_addr);
+	out32r (MPC106_REG_ADDR, reg_addr);
 
-    return (in32r(MPC106_REG_DATA | (reg & 0x3)));
+	return (in32r (MPC106_REG_DATA | (reg & 0x3)));
 }
 
 /* ------------------------------------------------------------------------- */
 
 long int dram_size (int board_type)
 {
-    /* No actual initialisation to do - done when setting up
-     * PICRs MCCRs ME/SARs etc in ram_init.S.
-     */
+	/* No actual initialisation to do - done when setting up
+	 * PICRs MCCRs ME/SARs etc in ram_init.S.
+	 */
 
-    register unsigned long i, msar1, mear1, memSize;
+	register unsigned long i, msar1, mear1, memSize;
 
 #if defined(CFG_MEMTEST)
-    register unsigned long reg;
+	register unsigned long reg;
 
-    printf("Testing DRAM\n");
+	printf ("Testing DRAM\n");
 
-    /* write each mem addr with it's address */
-    for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
-    *reg = reg;
+	/* write each mem addr with it's address */
+	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+		*reg = reg;
 
-    for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
-    {
-	if (*reg != reg)
-	    return -1;
-    }
+	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+		if (*reg != reg)
+			return -1;
+	}
 #endif
 
-    /*
-    * Since MPC106 memory controller chip has already been set to
-    * control all memory, just read and interpret its memory boundery register.
-    */
-    memSize = 0;
-    msar1 = mpc106_read_cfg_dword(MPC106_MSAR1);
-    mear1 = mpc106_read_cfg_dword(MPC106_MEAR1);
-    i     = mpc106_read_cfg_dword(MPC106_MBER) & 0xf;
-
-    do
-    {
-	if (i & 0x01)   /* is bank enabled ? */
-	    memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
-	msar1 >>= 8;
-	mear1 >>= 8;
-	i     >>= 1;
-    } while (i);
-
-    return (memSize * 0x100000);
+	/*
+	 * Since MPC106 memory controller chip has already been set to
+	 * control all memory, just read and interpret its memory boundery register.
+	 */
+	memSize = 0;
+	msar1 = mpc106_read_cfg_dword (MPC106_MSAR1);
+	mear1 = mpc106_read_cfg_dword (MPC106_MEAR1);
+	i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf;
+
+	do {
+		if (i & 0x01)	/* is bank enabled ? */
+			memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
+		msar1 >>= 8;
+		mear1 >>= 8;
+		i >>= 1;
+	} while (i);
+
+	return (memSize * 0x100000);
 }
 
 /* ------------------------------------------------------------------------- */
 
-long int initdram(int board_type)
+long int initdram (int board_type)
 {
-    return dram_size(board_type);
+	return dram_size (board_type);
 }
 
 /* ------------------------------------------------------------------------- */
 
 void after_reloc (ulong dest_addr)
 {
-    DECLARE_GLOBAL_DATA_PTR;
+	DECLARE_GLOBAL_DATA_PTR;
 
-    /*
-     * Jump to the main U-Boot board init code
-     */
-    board_init_r((gd_t *)gd, dest_addr);
+	/*
+	 * Jump to the main U-Boot board init code
+	 */
+	board_init_r ((gd_t *) gd, dest_addr);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -182,14 +183,13 @@ void after_reloc (ulong dest_addr)
  * do_reset is done here because in this case it is board specific, since the
  * 7xx CPUs can only be reset by external HW (the RTC in this case).
  */
-void
-do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+void do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 {
 #if defined(CONFIG_RTC_MK48T59)
-    /* trigger watchdog immediately */
-    rtc_set_watchdog(1, RTC_WD_RB_16TH);
+	/* trigger watchdog immediately */
+	rtc_set_watchdog (1, RTC_WD_RB_16TH);
 #else
-    #error "You must define the macro CONFIG_RTC_MK48T59."
+#error "You must define the macro CONFIG_RTC_MK48T59."
 #endif
 }
 
@@ -200,16 +200,16 @@ do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
  * Since the 7xx CPUs don't have an internal watchdog, this function is
  * board specific.  We use the RTC here.
  */
-void watchdog_reset(void)
+void watchdog_reset (void)
 {
 #if defined(CONFIG_RTC_MK48T59)
-    /* we use a 32 sec watchdog timer */
-    rtc_set_watchdog(8, RTC_WD_RB_4);
+	/* we use a 32 sec watchdog timer */
+	rtc_set_watchdog (8, RTC_WD_RB_4);
 #else
-    #error "You must define the macro CONFIG_RTC_MK48T59."
+#error "You must define the macro CONFIG_RTC_MK48T59."
 #endif
 }
-#endif    /* CONFIG_WATCHDOG */
+#endif /* CONFIG_WATCHDOG */
 
 /* ------------------------------------------------------------------------- */
 
@@ -218,29 +218,28 @@ extern GraphicDevice smi;
 
 void video_get_info_str (int line_number, char *info)
 {
-    /* init video info strings for graphic console */
-    switch (line_number)
-    {
-    case 1:
-	sprintf (info," MPC7xx V%d.%d at %ld / %ld MHz",
-	    (get_pvr() >> 8) & 0xFF,
-	    get_pvr() & 0xFF,
-	    bab7xx_get_gclk_freq()/1000000,
-	    bab7xx_get_bus_freq()/1000000);
+	/* init video info strings for graphic console */
+	switch (line_number) {
+	case 1:
+		sprintf (info, " MPC7xx V%d.%d at %ld / %ld MHz",
+			 (get_pvr () >> 8) & 0xFF,
+			 get_pvr () & 0xFF,
+			 bab7xx_get_gclk_freq () / 1000000,
+			 bab7xx_get_bus_freq () / 1000000);
+		return;
+	case 2:
+		sprintf (info,
+			 " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH",
+			 dram_size (0) / 0x100000, flash_init () / 0x100000);
+		return;
+	case 3:
+		sprintf (info, " %s", smi.modeIdent);
+		return;
+	}
+
+	/* no more info lines */
+	*info = 0;
 	return;
-    case 2:
-	sprintf (info, " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH",
-	    dram_size(0)/0x100000,
-	    flash_init()/0x100000);
-	return;
-    case 3:
-	sprintf (info, " %s", smi.modeIdent);
-	return;
-    }
-
-    /* no more info lines */
-    *info = 0;
-    return;
 }
 #endif
 
diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c
index f33aef71bc..15056606cb 100644
--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -31,32 +31,32 @@
 /* imports  */
 extern char console_buffer[CFG_CBSIZE];
 extern int l2_cache_enable (int l2control);
-extern int eepro100_write_eeprom (struct eth_device* dev, int location,
-		 int addr_len, unsigned short data);
-extern int read_eeprom (struct eth_device* dev, int location, int addr_len);
+extern int eepro100_write_eeprom (struct eth_device *dev, int location,
+				  int addr_len, unsigned short data);
+extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
 
 /*----------------------------------------------------------------------------*/
 /*
  * read/write to nvram is only byte access
  */
-void *nvram_read(void *dest, const long src, size_t count)
+void *nvram_read (void *dest, const long src, size_t count)
 {
-    uchar *d = (uchar *) dest;
-    uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
+	uchar *d = (uchar *) dest;
+	uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
 
-    while (count--)
-	*d++ = *s++;
+	while (count--)
+		*d++ = *s++;
 
-    return dest;
+	return dest;
 }
 
-void nvram_write(long dest, const void *src, size_t count)
+void nvram_write (long dest, const void *src, size_t count)
 {
-    uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
-    uchar *s = (uchar *) src;
+	uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
+	uchar *s = (uchar *) src;
 
-    while (count--)
-	*d++ = *s++;
+	while (count--)
+		*d++ = *s++;
 }
 
 /*----------------------------------------------------------------------------*/
@@ -67,192 +67,199 @@ void nvram_write(long dest, const void *src, size_t count)
  */
 int misc_init_r (void)
 {
-    revinfo eerev;
-    u_char *ptr;
-    u_int  i, l, initSrom, copyNv;
-    char buf[256];
-    char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
-		     0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
-
-    /* Clock setting for MPC107 i2c */
-    mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
-
-    /* Reset the EPIC */
-    out32r (MPC107_EUMB_GCR, 0xa0000000);
-    while (in32r (MPC107_EUMB_GCR) & 0x80000000);   /* Wait for reset to complete */
-    out32r (MPC107_EUMB_GCR, 0x20000000);           /* Put into into mixed mode */
-    while (in32r (MPC107_EUMB_IACKR) != 0xff);      /* Clear all pending interrupts */
-
-    /*
-     * Check/Remake revision info
-     */
-    initSrom = 0;
-    copyNv   = 0;
-
-    /* read out current revision srom contens */
-    mpc107_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo),
-		SECOND_DEVICE, FIRST_BLOCK);
-
-    /* read out current nvram shadow image */
-    nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
-
-    if (strcmp (eerev.magic, "ELTEC") != 0)
-    {
-	/* srom is not initialized -> create a default revision info */
-	for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++)
-	    *ptr++ = 0x00;
-	strcpy(eerev.magic, "ELTEC");
-	eerev.revrev[0] = 1;
-	eerev.revrev[1] = 0;
-	eerev.size = 0x00E0;
-	eerev.category[0] = 0x01;
-
-	/* node id from dead e128 as default */
-	eerev.etheraddr[0] = 0x00;
-	eerev.etheraddr[1] = 0x00;
-	eerev.etheraddr[2] = 0x5B;
-	eerev.etheraddr[3] = 0x00;
-	eerev.etheraddr[4] = 0x2E;
-	eerev.etheraddr[5] = 0x4D;
-
-	/* cache config word for ELPPC */
-	*(int*)&eerev.res[0] = 0;
-
-	initSrom = 1;  /* force dialog */
-	copyNv   = 1;  /* copy to nvram */
-    }
-
-    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum((u_char*)buf, CFG_SROM_SIZE)))
-    {
-	printf ("Invalid revision info copy in nvram !\n");
-	printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
-	printf ("  <r> to reenter revision info.\n");
-	printf ("=> ");
-	if (0 != readline (NULL))
-	{
-	    switch ((char)toupper(console_buffer[0]))
-	    {
-	    case 'C':
-		copyNv = 1;
-		break;
-	    case 'R':
-		copyNv = 1;
-		initSrom = 1;
-		break;
-	    }
-	}
-    }
-
-    if (initSrom)
-    {
-	memcpy (buf, &eerev.revision[0][0], 14);     /* save all revision info */
-	printf ("Enter revision number (0-9): %c  ", eerev.revision[0][0]);
-	if (0 != readline (NULL))
-	{
-	    eerev.revision[0][0] = (char)toupper(console_buffer[0]);
-	    memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
-	}
-
-	printf ("Enter revision character (A-Z): %c  ", eerev.revision[0][1]);
-	if (1 == readline (NULL))
-	{
-	    eerev.revision[0][1] = (char)toupper(console_buffer[0]);
+	revinfo eerev;
+	u_char *ptr;
+	u_int i, l, initSrom, copyNv;
+	char buf[256];
+	char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
+		0, 0, 0, 0, 10, 11, 12, 13, 14, 15
+	};
+
+	/* Clock setting for MPC107 i2c */
+	mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
+
+	/* Reset the EPIC */
+	out32r (MPC107_EUMB_GCR, 0xa0000000);
+	while (in32r (MPC107_EUMB_GCR) & 0x80000000);	/* Wait for reset to complete */
+	out32r (MPC107_EUMB_GCR, 0x20000000);	/* Put into into mixed mode */
+	while (in32r (MPC107_EUMB_IACKR) != 0xff);	/* Clear all pending interrupts */
+
+	/*
+	 * Check/Remake revision info
+	 */
+	initSrom = 0;
+	copyNv = 0;
+
+	/* read out current revision srom contens */
+	mpc107_srom_load (0x0000, (u_char *) & eerev, sizeof (revinfo),
+			  SECOND_DEVICE, FIRST_BLOCK);
+
+	/* read out current nvram shadow image */
+	nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+
+	if (strcmp (eerev.magic, "ELTEC") != 0) {
+		/* srom is not initialized -> create a default revision info */
+		for (i = 0, ptr = (u_char *) & eerev; i < sizeof (revinfo);
+		     i++)
+			*ptr++ = 0x00;
+		strcpy (eerev.magic, "ELTEC");
+		eerev.revrev[0] = 1;
+		eerev.revrev[1] = 0;
+		eerev.size = 0x00E0;
+		eerev.category[0] = 0x01;
+
+		/* node id from dead e128 as default */
+		eerev.etheraddr[0] = 0x00;
+		eerev.etheraddr[1] = 0x00;
+		eerev.etheraddr[2] = 0x5B;
+		eerev.etheraddr[3] = 0x00;
+		eerev.etheraddr[4] = 0x2E;
+		eerev.etheraddr[5] = 0x4D;
+
+		/* cache config word for ELPPC */
+		*(int *) &eerev.res[0] = 0;
+
+		initSrom = 1;	/* force dialog */
+		copyNv = 1;	/* copy to nvram */
 	}
 
-	printf ("Enter board name (V-XXXX-XXXX): %s  ", (char *)&eerev.board);
-	if (11 == readline (NULL))
-	{
-	    for (i=0; i<11; i++)
-		eerev.board[i] =  (char)toupper(console_buffer[i]);
-	    eerev.board[11] = '\0';
+	if ((copyNv == 0)
+	    && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) !=
+		el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) {
+		printf ("Invalid revision info copy in nvram !\n");
+		printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
+		printf ("  <r> to reenter revision info.\n");
+		printf ("=> ");
+		if (0 != readline (NULL)) {
+			switch ((char) toupper (console_buffer[0])) {
+			case 'C':
+				copyNv = 1;
+				break;
+			case 'R':
+				copyNv = 1;
+				initSrom = 1;
+				break;
+			}
+		}
 	}
 
-	printf ("Enter serial number: %s ", (char *)&eerev.serial );
-	if (6 == readline (NULL))
-	{
-	    for (i=0; i<6; i++)
-		eerev.serial[i] = console_buffer[i];
-	    eerev.serial[6] = '\0';
-	}
-
-	printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x  ",
-	    eerev.etheraddr[0], eerev.etheraddr[1],
-	    eerev.etheraddr[2], eerev.etheraddr[3],
-	    eerev.etheraddr[4], eerev.etheraddr[5]);
-	if (12 == readline (NULL))
-	{
-	    for (i=0; i<12; i+=2)
-	    eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
-			       hex[toupper(console_buffer[i+1])-'0']);
-	}
+	if (initSrom) {
+		memcpy (buf, &eerev.revision[0][0], 14);	/* save all revision info */
+		printf ("Enter revision number (0-9): %c  ",
+			eerev.revision[0][0]);
+		if (0 != readline (NULL)) {
+			eerev.revision[0][0] =
+				(char) toupper (console_buffer[0]);
+			memcpy (&eerev.revision[1][0], buf, 12);	/* shift rest of rev info */
+		}
+
+		printf ("Enter revision character (A-Z): %c  ",
+			eerev.revision[0][1]);
+		if (1 == readline (NULL)) {
+			eerev.revision[0][1] =
+				(char) toupper (console_buffer[0]);
+		}
+
+		printf ("Enter board name (V-XXXX-XXXX): %s  ",
+			(char *) &eerev.board);
+		if (11 == readline (NULL)) {
+			for (i = 0; i < 11; i++)
+				eerev.board[i] =
+					(char) toupper (console_buffer[i]);
+			eerev.board[11] = '\0';
+		}
+
+		printf ("Enter serial number: %s ", (char *) &eerev.serial);
+		if (6 == readline (NULL)) {
+			for (i = 0; i < 6; i++)
+				eerev.serial[i] = console_buffer[i];
+			eerev.serial[6] = '\0';
+		}
+
+		printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x  ", eerev.etheraddr[0], eerev.etheraddr[1], eerev.etheraddr[2], eerev.etheraddr[3], eerev.etheraddr[4], eerev.etheraddr[5]);
+		if (12 == readline (NULL)) {
+			for (i = 0; i < 12; i += 2)
+				eerev.etheraddr[i >> 1] =
+					(char) (16 *
+						hex[toupper
+						    (console_buffer[i]) -
+						    '0'] +
+						hex[toupper
+						    (console_buffer[i + 1]) -
+						    '0']);
+		}
+
+		l = strlen ((char *) &eerev.text);
+		printf ("Add to text section (max 64 chr): %s ",
+			(char *) &eerev.text);
+		if (0 != readline (NULL)) {
+			for (i = l; i < 63; i++)
+				eerev.text[i] = console_buffer[i - l];
+			eerev.text[63] = '\0';
+		}
+
+		/* prepare network eeprom */
+		memset (buf, 0, 128);
+
+		buf[0] = eerev.etheraddr[1];
+		buf[1] = eerev.etheraddr[0];
+		buf[2] = eerev.etheraddr[3];
+		buf[3] = eerev.etheraddr[2];
+		buf[4] = eerev.etheraddr[5];
+		buf[5] = eerev.etheraddr[4];
+
+		*(unsigned short *) &buf[20] = 0x48B2;
+		*(unsigned short *) &buf[22] = 0x0004;
+		*(unsigned short *) &buf[24] = 0x1433;
+
+		printf ("\nSRom:  Writing i82559 info ........ ");
+		if (eepro100_srom_store ((unsigned short *) buf) == -1)
+			printf ("FAILED\n");
+		else
+			printf ("OK\n");
+
+		/* update CRC */
+		eerev.crc =
+			el_srom_checksum ((u_char *) eerev.board, eerev.size);
+
+		/* write new values */
+		printf ("\nSRom:  Writing revision info ...... ");
+		if (mpc107_srom_store
+		    ((BLOCK_SIZE - sizeof (revinfo)), (u_char *) & eerev,
+		     sizeof (revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
+			printf ("FAILED\n\n");
+		else
+			printf ("OK\n\n");
+
+		/* write new values as shadow image to nvram */
+		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CFG_SROM_SIZE);
 
-	l = strlen ((char *)&eerev.text);
-	printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text );
-	if (0 != readline (NULL))
-	{
-	    for (i = l; i<63; i++)
-		eerev.text[i] = console_buffer[i-l];
-	    eerev.text[63] = '\0';
 	}
 
-	/* prepare network eeprom */
-	memset (buf, 0, 128);
-
-	buf[0] = eerev.etheraddr[1];
-	buf[1] = eerev.etheraddr[0];
-	buf[2] = eerev.etheraddr[3];
-	buf[3] = eerev.etheraddr[2];
-	buf[4] = eerev.etheraddr[5];
-	buf[5] = eerev.etheraddr[4];
-
-	*(unsigned short *)&buf[20] = 0x48B2;
-	*(unsigned short *)&buf[22] = 0x0004;
-	*(unsigned short *)&buf[24] = 0x1433;
-
-	printf("\nSRom:  Writing i82559 info ........ ");
-	if (eepro100_srom_store ((unsigned short *)buf) == -1)
-	    printf("FAILED\n");
-	else
-	    printf("OK\n");
-
-	/* update CRC */
-	eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size);
-
-	/* write new values */
-	printf("\nSRom:  Writing revision info ...... ");
-	if (mpc107_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev,
-			    sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
-	    printf("FAILED\n\n");
-	else
-	    printf("OK\n\n");
-
-	/* write new values as shadow image to nvram */
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
-
-    } /*if (initSrom) */
-
-    /* copy current values as shadow image to nvram */
-    if (initSrom == 0 && copyNv == 1)
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
-
-    /* update environment */
-    sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
-	    eerev.etheraddr[0], eerev.etheraddr[1],
-	    eerev.etheraddr[2], eerev.etheraddr[3],
-	    eerev.etheraddr[4], eerev.etheraddr[5]);
-    setenv ("ethaddr", buf);
-
-    /* set serial console as default */
-    if ((ptr = getenv ("console")) == NULL)
-	setenv ("console", "serial");
-
-    /* print actual board identification */
-    printf("Ident: %s  Ser %s  Rev %c%c\n",
-	    eerev.board, (char *)&eerev.serial,
-	    eerev.revision[0][0], eerev.revision[0][1]);
-
-    return (0);
+	/*if (initSrom) */
+	/* copy current values as shadow image to nvram */
+	if (initSrom == 0 && copyNv == 1)
+		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CFG_SROM_SIZE);
+
+	/* update environment */
+	sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+		 eerev.etheraddr[0], eerev.etheraddr[1],
+		 eerev.etheraddr[2], eerev.etheraddr[3],
+		 eerev.etheraddr[4], eerev.etheraddr[5]);
+	setenv ("ethaddr", buf);
+
+	/* set serial console as default */
+	if ((ptr = getenv ("console")) == NULL)
+		setenv ("console", "serial");
+
+	/* print actual board identification */
+	printf ("Ident: %s  Ser %s  Rev %c%c\n",
+		eerev.board, (char *) &eerev.serial,
+		eerev.revision[0][0], eerev.revision[0][1]);
+
+	return (0);
 }
 
 /*----------------------------------------------------------------------------*/
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 76f9f372b1..bc3d9f4c62 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -38,19 +38,19 @@
 /* imports from common/main.c */
 extern char console_buffer[CFG_CBSIZE];
 
-extern void eeprom_init  (void);
-extern int  eeprom_read  (unsigned dev_addr, unsigned offset,
-			  unsigned char *buffer, unsigned cnt);
-extern int  eeprom_write (unsigned dev_addr, unsigned offset,
-			  unsigned char *buffer, unsigned cnt);
+extern void eeprom_init (void);
+extern int eeprom_read (unsigned dev_addr, unsigned offset,
+			unsigned char *buffer, unsigned cnt);
+extern int eeprom_write (unsigned dev_addr, unsigned offset,
+			 unsigned char *buffer, unsigned cnt);
 
 /* globals */
-void *video_hw_init(void);
-void video_set_lut (unsigned int index,     /* color number */
-		    unsigned char r,        /* red */
-		    unsigned char g,        /* green */
-		    unsigned char b         /* blue */
-		    );
+void *video_hw_init (void);
+void video_set_lut (unsigned int index,	/* color number */
+		    unsigned char r,	/* red */
+		    unsigned char g,	/* green */
+		    unsigned char b	/* blue */
+	);
 
 GraphicDevice gdev;
 
@@ -60,79 +60,78 @@ static void video_test_image (void);
 static void video_default_lut (unsigned int clut_type);
 
 /* revision info foer MHPC EEPROM offset 480 */
-typedef struct  {
-    char    board[12];      /* 000 - Board Revision information */
-    char    sensor;         /* 012 - Sensor Type information */
-    char    serial[8];      /* 013 - Board serial number */
-    char    etheraddr[6];   /* 021 - Ethernet node addresse */
-    char    revision[2];    /* 027 - Revision code */
-    char    option[3];      /* 029 - resevered for options */
+typedef struct {
+	char board[12];		/* 000 - Board Revision information */
+	char sensor;		/* 012 - Sensor Type information */
+	char serial[8];		/* 013 - Board serial number */
+	char etheraddr[6];	/* 021 - Ethernet node addresse */
+	char revision[2];	/* 027 - Revision code */
+	char option[3];		/* 029 - resevered for options */
 } revinfo;
 
 /* ------------------------------------------------------------------------- */
 
-static const unsigned int sdram_table[] =
-{
-    /* read single beat cycle */
-    0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
-    0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
-
-    /* read burst cycle */
-    0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
-    0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
-    0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-    0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-    /* write single beat cycle */
-    0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
-    0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-    /* write burst cycle */
-    0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
-    0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
-    0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-    0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-    /* periodic timer expired */
-    0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
-    0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
-    0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-    /* exception */
-    0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
+static const unsigned int sdram_table[] = {
+	/* read single beat cycle */
+	0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
+	0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
+
+	/* read burst cycle */
+	0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
+	0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* write single beat cycle */
+	0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* write burst cycle */
+	0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
+	0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* periodic timer expired */
+	0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
+	0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* exception */
+	0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
 };
 
 /* ------------------------------------------------------------------------- */
 
 int board_early_init_f (void)
 {
-    volatile immap_t  *im = (immap_t *)CFG_IMMR;
-    volatile cpm8xx_t *cp = &(im->im_cpm);
-    volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-
-    /* reset the port A s.a. cpm-routines */
-    ip->iop_padat = 0x0000;
-    ip->iop_papar = 0x0000;
-    ip->iop_padir = 0x0800;
-    ip->iop_paodr = 0x0000;
-
-    /* reset the port B for digital and LCD output */
-    cp->cp_pbdat  = 0x0300;
-    cp->cp_pbpar  = 0x5001;
-    cp->cp_pbdir  = 0x5301;
-    cp->cp_pbodr  = 0x0000;
-
-    /* reset the port C configured for SMC1 serial port and aqc. control */
-    ip->iop_pcdat = 0x0800;
-    ip->iop_pcpar = 0x0000;
-    ip->iop_pcdir = 0x0e30;
-    ip->iop_pcso  = 0x0000;
-
-    /* Config port D for LCD output */
-    ip->iop_pdpar = 0x1fff;
-    ip->iop_pddir = 0x1fff;
-
-    return (0);
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
+
+	/* reset the port A s.a. cpm-routines */
+	ip->iop_padat = 0x0000;
+	ip->iop_papar = 0x0000;
+	ip->iop_padir = 0x0800;
+	ip->iop_paodr = 0x0000;
+
+	/* reset the port B for digital and LCD output */
+	cp->cp_pbdat = 0x0300;
+	cp->cp_pbpar = 0x5001;
+	cp->cp_pbdir = 0x5301;
+	cp->cp_pbodr = 0x0000;
+
+	/* reset the port C configured for SMC1 serial port and aqc. control */
+	ip->iop_pcdat = 0x0800;
+	ip->iop_pcpar = 0x0000;
+	ip->iop_pcdir = 0x0e30;
+	ip->iop_pcso = 0x0000;
+
+	/* Config port D for LCD output */
+	ip->iop_pdpar = 0x1fff;
+	ip->iop_pddir = 0x1fff;
+
+	return (0);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -142,322 +141,327 @@ int board_early_init_f (void)
  */
 int checkboard (void)
 {
-    puts ("Board: ELTEC miniHiperCam\n");
-    return(0);
+	puts ("Board: ELTEC miniHiperCam\n");
+	return (0);
 }
 
 /* ------------------------------------------------------------------------- */
 
-int misc_init_r(void)
+int misc_init_r (void)
 {
-    revinfo  mhpcRevInfo;
-    char     nid[32];
-    char     *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
-				    "OMNIVISON OV7110 b&w", NULL };
-    char     hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
-			 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
-    int      i;
-
-    /* check revision data */
-    eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32);
-
-    if (strncmp((char *)&mhpcRevInfo.board[2], "MHPC", 4) != 0)
-    {
-    printf ("Enter revision number (0-9): %c  ", mhpcRevInfo.revision[0]);
-    if (0 != readline (NULL))
-    {
-	mhpcRevInfo.revision[0] = (char)toupper(console_buffer[0]);
-    }
-
-    printf ("Enter revision character (A-Z): %c  ", mhpcRevInfo.revision[1]);
-    if (1 == readline (NULL))
-    {
-	mhpcRevInfo.revision[1] = (char)toupper(console_buffer[0]);
-    }
-
-    printf("Enter board name (V-XXXX-XXXX): %s  ", (char *)&mhpcRevInfo.board);
-    if (11 == readline (NULL))
-    {
-	for (i=0; i<11; i++)
-	{
-	    mhpcRevInfo.board[i] =  (char)toupper(console_buffer[i]);
-	    mhpcRevInfo.board[11] = '\0';
-	}
-    }
-
-    printf("Supported sensor types:\n");
-    i=0;
-    do
-    {
-	printf("\n    \'%d\' : %s\n", i, mhpcSensorTypes[i]);
-    } while ( mhpcSensorTypes[++i] != NULL );
-
-    do
-    {
-	printf("\nEnter sensor number (0-255): %d  ", (int)mhpcRevInfo.sensor );
-	if (0 != readline (NULL))
-	{
-	mhpcRevInfo.sensor = (unsigned char)simple_strtoul(console_buffer, NULL, 10);
-	}
-    } while ( mhpcRevInfo.sensor >= i );
-
-    printf("Enter serial number: %s ", (char *)&mhpcRevInfo.serial );
-    if (6 == readline (NULL))
-    {
-	for (i=0; i<6; i++)
-	{
-	mhpcRevInfo.serial[i] = console_buffer[i];
-	}
-	mhpcRevInfo.serial[6] = '\0';
-    }
-
-    printf("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x  ",
-	      mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
-	      mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
-	      mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]  );
-    if (12 == readline (NULL))
-    {
-	for (i=0; i<12; i+=2)
-	{
-	mhpcRevInfo.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
-			     hex[toupper(console_buffer[i+1])-'0']);
+	revinfo mhpcRevInfo;
+	char nid[32];
+	char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
+		"OMNIVISON OV7110 b&w", NULL
+	};
+	char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
+		0, 0, 0, 0, 10, 11, 12, 13, 14, 15
+	};
+	int i;
+
+	/* check revision data */
+	eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char *) &mhpcRevInfo, 32);
+
+	if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
+		printf ("Enter revision number (0-9): %c  ",
+			mhpcRevInfo.revision[0]);
+		if (0 != readline (NULL)) {
+			mhpcRevInfo.revision[0] =
+				(char) toupper (console_buffer[0]);
+		}
+
+		printf ("Enter revision character (A-Z): %c  ",
+			mhpcRevInfo.revision[1]);
+		if (1 == readline (NULL)) {
+			mhpcRevInfo.revision[1] =
+				(char) toupper (console_buffer[0]);
+		}
+
+		printf ("Enter board name (V-XXXX-XXXX): %s  ",
+			(char *) &mhpcRevInfo.board);
+		if (11 == readline (NULL)) {
+			for (i = 0; i < 11; i++) {
+				mhpcRevInfo.board[i] =
+					(char) toupper (console_buffer[i]);
+				mhpcRevInfo.board[11] = '\0';
+			}
+		}
+
+		printf ("Supported sensor types:\n");
+		i = 0;
+		do {
+			printf ("\n    \'%d\' : %s\n", i, mhpcSensorTypes[i]);
+		} while (mhpcSensorTypes[++i] != NULL);
+
+		do {
+			printf ("\nEnter sensor number (0-255): %d  ",
+				(int) mhpcRevInfo.sensor);
+			if (0 != readline (NULL)) {
+				mhpcRevInfo.sensor =
+					(unsigned char)
+					simple_strtoul (console_buffer, NULL,
+							10);
+			}
+		} while (mhpcRevInfo.sensor >= i);
+
+		printf ("Enter serial number: %s ",
+			(char *) &mhpcRevInfo.serial);
+		if (6 == readline (NULL)) {
+			for (i = 0; i < 6; i++) {
+				mhpcRevInfo.serial[i] = console_buffer[i];
+			}
+			mhpcRevInfo.serial[6] = '\0';
+		}
+
+		printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x  ", mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
+		if (12 == readline (NULL)) {
+			for (i = 0; i < 12; i += 2) {
+				mhpcRevInfo.etheraddr[i >> 1] =
+					(char) (16 *
+						hex[toupper
+						    (console_buffer[i]) -
+						    '0'] +
+						hex[toupper
+						    (console_buffer[i + 1]) -
+						    '0']);
+			}
+		}
+
+		/* setup new revision data */
+		eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char *) &mhpcRevInfo,
+			      32);
 	}
-    }
-
-    /* setup new revision data */
-    eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32);
-    }
-
-    /* set environment */
-    sprintf( nid, "%02x:%02x:%02x:%02x:%02x:%02x",
-		  mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
-		  mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
-		  mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
-    setenv("ethaddr", nid);
-
-    /* print actual board identification */
-    printf("Ident: %s %s Ser %s Rev %c%c\n",
-	    mhpcRevInfo.board, (mhpcRevInfo.sensor==0?"color":"b&w"),
-	    (char *)&mhpcRevInfo.serial,
-	    mhpcRevInfo.revision[0], mhpcRevInfo.revision[1]);
-
-    return (0);
+
+	/* set environment */
+	sprintf (nid, "%02x:%02x:%02x:%02x:%02x:%02x",
+		 mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
+		 mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
+		 mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
+	setenv ("ethaddr", nid);
+
+	/* print actual board identification */
+	printf ("Ident: %s %s Ser %s Rev %c%c\n",
+		mhpcRevInfo.board,
+		(mhpcRevInfo.sensor == 0 ? "color" : "b&w"),
+		(char *) &mhpcRevInfo.serial, mhpcRevInfo.revision[0],
+		mhpcRevInfo.revision[1]);
+
+	return (0);
 }
 
 /* ------------------------------------------------------------------------- */
 
 long int initdram (int board_type)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-    upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
-    memctl->memc_mamr  = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
-    memctl->memc_mbmr  = MBMR_GPL_B4DIS;	/* should this be mamr? - NTL */
-    memctl->memc_mptpr = MPTPR_PTP_DIV64;
-    memctl->memc_mar   = 0x00008800;
-
-    /*
-     * Map controller SDRAM bank 0
-     */
-    memctl->memc_or1 = CFG_OR1_PRELIM;
-    memctl->memc_br1 = CFG_BR1_PRELIM;
-    udelay(200);
-
-    /*
-     * Map controller SDRAM bank 1
-     */
-    memctl->memc_or2 = CFG_OR2;
-    memctl->memc_br2 = CFG_BR2;
-
-    /*
-     * Perform SDRAM initializsation sequence
-     */
-    memctl->memc_mcr  = 0x80002105;    /* SDRAM bank 0 */
-    udelay(1);
-    memctl->memc_mcr  = 0x80002730;    /* SDRAM bank 0 - execute twice */
-    udelay(1);
-    memctl->memc_mamr |= MAMR_PTAE;    /* enable refresh */
-
-    udelay(10000);
-
-    /* leave place for framebuffers */
-    return (SDRAM_MAX_SIZE-SDRAM_RES_SIZE);
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+		   sizeof (sdram_table) / sizeof (uint));
+
+	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* should this be mamr? - NTL */
+	memctl->memc_mptpr = MPTPR_PTP_DIV64;
+	memctl->memc_mar = 0x00008800;
+
+	/*
+	 * Map controller SDRAM bank 0
+	 */
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+	udelay (200);
+
+	/*
+	 * Map controller SDRAM bank 1
+	 */
+	memctl->memc_or2 = CFG_OR2;
+	memctl->memc_br2 = CFG_BR2;
+
+	/*
+	 * Perform SDRAM initializsation sequence
+	 */
+	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
+	udelay (1);
+	memctl->memc_mcr = 0x80002730;	/* SDRAM bank 0 - execute twice */
+	udelay (1);
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	udelay (10000);
+
+	/* leave place for framebuffers */
+	return (SDRAM_MAX_SIZE - SDRAM_RES_SIZE);
 }
 
 /* ------------------------------------------------------------------------- */
 
 static void video_circle (char *center, int radius, int color, int pitch)
 {
-    int x,y,d,dE,dSE;
-
-    x   = 0;
-    y   = radius;
-    d   = 1-radius;
-    dE  = 3;
-    dSE = -2*radius+5;
-
-    *(center+x+y*pitch) = color;
-    *(center+y+x*pitch) = color;
-    *(center+y-x*pitch) = color;
-    *(center+x-y*pitch) = color;
-    *(center-x-y*pitch) = color;
-    *(center-y-x*pitch) = color;
-    *(center-y+x*pitch) = color;
-    *(center-x+y*pitch) = color;
-    while(y>x)
-    {
-	if (d<0)
-	{
-	    d   += dE;
-	    dE  += 2;
-	    dSE += 2;
-	    x++;
+	int x, y, d, dE, dSE;
+
+	x = 0;
+	y = radius;
+	d = 1 - radius;
+	dE = 3;
+	dSE = -2 * radius + 5;
+
+	*(center + x + y * pitch) = color;
+	*(center + y + x * pitch) = color;
+	*(center + y - x * pitch) = color;
+	*(center + x - y * pitch) = color;
+	*(center - x - y * pitch) = color;
+	*(center - y - x * pitch) = color;
+	*(center - y + x * pitch) = color;
+	*(center - x + y * pitch) = color;
+	while (y > x) {
+		if (d < 0) {
+			d += dE;
+			dE += 2;
+			dSE += 2;
+			x++;
+		} else {
+			d += dSE;
+			dE += 2;
+			dSE += 4;
+			x++;
+			y--;
+		}
+		*(center + x + y * pitch) = color;
+		*(center + y + x * pitch) = color;
+		*(center + y - x * pitch) = color;
+		*(center + x - y * pitch) = color;
+		*(center - x - y * pitch) = color;
+		*(center - y - x * pitch) = color;
+		*(center - y + x * pitch) = color;
+		*(center - x + y * pitch) = color;
 	}
-	else
-	{
-	    d   += dSE;
-	    dE  += 2;
-	    dSE += 4;
-	    x++;
-	    y--;
-	}
-	*(center+x+y*pitch) = color;
-	*(center+y+x*pitch) = color;
-	*(center+y-x*pitch) = color;
-	*(center+x-y*pitch) = color;
-	*(center-x-y*pitch) = color;
-	*(center-y-x*pitch) = color;
-	*(center-y+x*pitch) = color;
-	*(center-x+y*pitch) = color;
-    }
 }
 
 /* ------------------------------------------------------------------------- */
 
-static void video_test_image(void)
+static void video_test_image (void)
 {
-    char *di;
-    int i, n;
-
-    /* draw raster */
-    for (i=0; i<LCD_VIDEO_ROWS; i+=32)
-    {
-	memset((char*)(LCD_VIDEO_ADDR+i*LCD_VIDEO_COLS), LCD_VIDEO_FG, LCD_VIDEO_COLS);
-	for (n=i+1;n<i+32;n++)
-	    memset((char*)(LCD_VIDEO_ADDR+n*LCD_VIDEO_COLS), LCD_VIDEO_BG, LCD_VIDEO_COLS);
-    }
-
-    for (i=0; i<LCD_VIDEO_COLS; i+=32)
-    {
-	for (n=0; n<LCD_VIDEO_ROWS; n++)
-	    *(char*)(LCD_VIDEO_ADDR+n*LCD_VIDEO_COLS+i) = LCD_VIDEO_FG;
-    }
-
-    /* draw gray bar */
-    di = (char *)(LCD_VIDEO_ADDR + (LCD_VIDEO_COLS-256)/64*32 + 97*LCD_VIDEO_COLS);
-    for (n=0; n<63; n++)
-    {
-	for (i=0; i<256; i++)
-	{
-	    *di++ = (char)i;
-	    *(di+LCD_VIDEO_COLS*64) = (i&1)*255;
+	char *di;
+	int i, n;
+
+	/* draw raster */
+	for (i = 0; i < LCD_VIDEO_ROWS; i += 32) {
+		memset ((char *) (LCD_VIDEO_ADDR + i * LCD_VIDEO_COLS),
+			LCD_VIDEO_FG, LCD_VIDEO_COLS);
+		for (n = i + 1; n < i + 32; n++)
+			memset ((char *) (LCD_VIDEO_ADDR +
+					  n * LCD_VIDEO_COLS), LCD_VIDEO_BG,
+				LCD_VIDEO_COLS);
+	}
+
+	for (i = 0; i < LCD_VIDEO_COLS; i += 32) {
+		for (n = 0; n < LCD_VIDEO_ROWS; n++)
+			*(char *) (LCD_VIDEO_ADDR + n * LCD_VIDEO_COLS + i) =
+				LCD_VIDEO_FG;
 	}
-	di += LCD_VIDEO_COLS-256;
-    }
 
-    video_circle ((char*)LCD_VIDEO_ADDR+LCD_VIDEO_COLS/2+LCD_VIDEO_ROWS/2*LCD_VIDEO_COLS,
-		  LCD_VIDEO_ROWS/2,LCD_VIDEO_FG, LCD_VIDEO_COLS);
+	/* draw gray bar */
+	di = (char *) (LCD_VIDEO_ADDR + (LCD_VIDEO_COLS - 256) / 64 * 32 +
+		       97 * LCD_VIDEO_COLS);
+	for (n = 0; n < 63; n++) {
+		for (i = 0; i < 256; i++) {
+			*di++ = (char) i;
+			*(di + LCD_VIDEO_COLS * 64) = (i & 1) * 255;
+		}
+		di += LCD_VIDEO_COLS - 256;
+	}
+
+	video_circle ((char *) LCD_VIDEO_ADDR + LCD_VIDEO_COLS / 2 +
+		      LCD_VIDEO_ROWS / 2 * LCD_VIDEO_COLS, LCD_VIDEO_ROWS / 2,
+		      LCD_VIDEO_FG, LCD_VIDEO_COLS);
 }
 
 /* ------------------------------------------------------------------------- */
 
 static void video_default_lut (unsigned int clut_type)
 {
-    unsigned int i;
-    unsigned char RGB[] =
-	{
-	0x00, 0x00, 0x00,   /* black */
-	0x80, 0x80, 0x80,   /* gray */
-	0xff, 0x00, 0x00,   /* red */
-	0x00, 0xff, 0x00,   /* green */
-	0x00, 0x00, 0xff,   /* blue */
-	0x00, 0xff, 0xff,   /* cyan */
-	0xff, 0x00, 0xff,   /* magenta */
-	0xff, 0xff, 0x00,   /* yellow */
-	0x80, 0x00, 0x00,   /* dark red */
-	0x00, 0x80, 0x00,   /* dark green */
-	0x00, 0x00, 0x80,   /* dark blue */
-	0x00, 0x80, 0x80,   /* dark cyan */
-	0x80, 0x00, 0x80,   /* dark magenta */
-	0x80, 0x80, 0x00,   /* dark yellow */
-	0xc0, 0xc0, 0xc0,   /* light gray */
-	0xff, 0xff, 0xff,   /* white */
+	unsigned int i;
+	unsigned char RGB[] = {
+		0x00, 0x00, 0x00,	/* black */
+		0x80, 0x80, 0x80,	/* gray */
+		0xff, 0x00, 0x00,	/* red */
+		0x00, 0xff, 0x00,	/* green */
+		0x00, 0x00, 0xff,	/* blue */
+		0x00, 0xff, 0xff,	/* cyan */
+		0xff, 0x00, 0xff,	/* magenta */
+		0xff, 0xff, 0x00,	/* yellow */
+		0x80, 0x00, 0x00,	/* dark red */
+		0x00, 0x80, 0x00,	/* dark green */
+		0x00, 0x00, 0x80,	/* dark blue */
+		0x00, 0x80, 0x80,	/* dark cyan */
+		0x80, 0x00, 0x80,	/* dark magenta */
+		0x80, 0x80, 0x00,	/* dark yellow */
+		0xc0, 0xc0, 0xc0,	/* light gray */
+		0xff, 0xff, 0xff,	/* white */
 	};
 
-    switch (clut_type)
-    {
-    case 1:
-	for (i=0; i<240; i++)
-	    video_set_lut (i, i, i, i);
-	for (i=0; i<16; i++)
-	    video_set_lut (i+240, RGB[i*3], RGB[i*3+1], RGB[i*3+2]);
-	break;
-    default:
-	for (i=0; i<256; i++)
-	    video_set_lut (i, i, i, i);
-    }
+	switch (clut_type) {
+	case 1:
+		for (i = 0; i < 240; i++)
+			video_set_lut (i, i, i, i);
+		for (i = 0; i < 16; i++)
+			video_set_lut (i + 240, RGB[i * 3], RGB[i * 3 + 1],
+				       RGB[i * 3 + 2]);
+		break;
+	default:
+		for (i = 0; i < 256; i++)
+			video_set_lut (i, i, i, i);
+	}
 }
 
 /* ------------------------------------------------------------------------- */
 
 void *video_hw_init (void)
 {
-    unsigned int clut = 0;
-    unsigned char *penv;
-    immap_t *immr = (immap_t *) CFG_IMMR;
-
-    /* enable video only on CLUT value */
-    if ((penv = getenv ("clut")) != NULL)
-	clut = (u_int)simple_strtoul (penv, NULL, 10);
-    else
-	return NULL;
-
-    /* disable graphic before write LCD regs. */
-    immr->im_lcd.lcd_lccr = 0x96000866;
-
-    /* config LCD regs. */
-    immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
-    immr->im_lcd.lcd_lchcr = 0x010a0093;
-    immr->im_lcd.lcd_lcvcr = 0x900f0024;
-
-    printf ("Video: 640x480 8Bit Index Lut %s\n",
-	    (clut==1?"240/16 (gray/vga)":"256(gray)"));
-
-    video_default_lut (clut);
-
-    /* clear framebuffer */
-    memset ( (char*)(LCD_VIDEO_ADDR), LCD_VIDEO_BG, LCD_VIDEO_ROWS*LCD_VIDEO_COLS );
-
-    /* enable graphic */
-    immr->im_lcd.lcd_lccr = 0x96000867;
-
-    /* fill in Graphic Device */
-    gdev.frameAdrs = LCD_VIDEO_ADDR;
-    gdev.winSizeX = LCD_VIDEO_COLS;
-    gdev.winSizeY = LCD_VIDEO_ROWS;
-    gdev.gdfBytesPP = 1;
-    gdev.gdfIndex = GDF__8BIT_INDEX;
-
-    if (clut > 1)
-	/* return Graphic Device for console */
-	return (void *)&gdev;
-    else
-	/* just graphic enabled - draw something beautiful */
-	video_test_image();
-
-    return NULL;            /* this disabels cfb - console */
+	unsigned int clut = 0;
+	unsigned char *penv;
+	immap_t *immr = (immap_t *) CFG_IMMR;
+
+	/* enable video only on CLUT value */
+	if ((penv = getenv ("clut")) != NULL)
+		clut = (u_int) simple_strtoul (penv, NULL, 10);
+	else
+		return NULL;
+
+	/* disable graphic before write LCD regs. */
+	immr->im_lcd.lcd_lccr = 0x96000866;
+
+	/* config LCD regs. */
+	immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
+	immr->im_lcd.lcd_lchcr = 0x010a0093;
+	immr->im_lcd.lcd_lcvcr = 0x900f0024;
+
+	printf ("Video: 640x480 8Bit Index Lut %s\n",
+		(clut == 1 ? "240/16 (gray/vga)" : "256(gray)"));
+
+	video_default_lut (clut);
+
+	/* clear framebuffer */
+	memset ((char *) (LCD_VIDEO_ADDR), LCD_VIDEO_BG,
+		LCD_VIDEO_ROWS * LCD_VIDEO_COLS);
+
+	/* enable graphic */
+	immr->im_lcd.lcd_lccr = 0x96000867;
+
+	/* fill in Graphic Device */
+	gdev.frameAdrs = LCD_VIDEO_ADDR;
+	gdev.winSizeX = LCD_VIDEO_COLS;
+	gdev.winSizeY = LCD_VIDEO_ROWS;
+	gdev.gdfBytesPP = 1;
+	gdev.gdfIndex = GDF__8BIT_INDEX;
+
+	if (clut > 1)
+		/* return Graphic Device for console */
+		return (void *) &gdev;
+	else
+		/* just graphic enabled - draw something beautiful */
+		video_test_image ();
+
+	return NULL;		/* this disabels cfb - console */
 }
 
 /* ------------------------------------------------------------------------- */
@@ -465,13 +469,15 @@ void *video_hw_init (void)
 void video_set_lut (unsigned int index,
 		    unsigned char r, unsigned char g, unsigned char b)
 {
-    unsigned int lum;
-    unsigned short *pLut = (unsigned short *)(CFG_IMMR + 0x0e00);
-
-    /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
-    /* y = 0.299*R + 0.587*G + 0.114*B */
-    lum = (2990*r + 5870*g + 1140*b)/10000;
-    pLut[index] = ((b & 0xc0)<<4) | ((g & 0xc0)<<2) | (r & 0xc0) | (lum & 0x3f);
+	unsigned int lum;
+	unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00);
+
+	/* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
+	/* y = 0.299*R + 0.587*G + 0.114*B */
+	lum = (2990 * r + 5870 * g + 1140 * b) / 10000;
+	pLut[index] =
+		((b & 0xc0) << 4) | ((g & 0xc0) << 2) | (r & 0xc0) | (lum &
+								      0x3f);
 }
 
 /* ------------------------------------------------------------------------- */