avr32: add support for EarthLCD Favr-32 board

This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

1 files changed, 230 insertions, 0 deletions

diff --git a/board/earthlcd/favr-32-ezkit/flash.c b/board/earthlcd/favr-32-ezkit/flash.c
new file mode 100644
index 0000000000..49a715a299
--- /dev/null
+++ b/board/earthlcd/favr-32-ezkit/flash.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_FAVR32_EZKIT_EXT_FLASH
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+flash_info_t flash_info[1];
+
+static void flash_identify(uint16_t *flash, flash_info_t *info)
+{
+	unsigned long flags;
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+
+	writew(0xaa, flash + 0x555);
+	writew(0x55, flash + 0xaaa);
+	writew(0x90, flash + 0x555);
+	info->flash_id = readl(flash);
+	writew(0xff, flash);
+
+	readw(flash);
+
+	if (flags)
+		enable_interrupts();
+}
+
+unsigned long flash_init(void)
+{
+	unsigned long addr;
+	unsigned int i;
+
+	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].sector_count = 135;
+
+	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+
+	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
+		flash_info[0].start[i] = addr;
+	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
+		flash_info[0].start[i] = addr;
+
+	return CFG_FLASH_SIZE;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+	       info->flash_id >> 16, info->flash_id & 0xffff);
+	printf("Size: %ld MB in %d sectors\n",
+	       info->size >> 10, info->sector_count);
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	unsigned long flags;
+	unsigned long start_time;
+	uint16_t *fb, *sb;
+	unsigned int i;
+	int ret;
+	uint16_t status;
+
+	if ((s_first < 0) || (s_first > s_last)
+	    || (s_last >= info->sector_count)) {
+		puts("Error: first and/or last sector out of range\n");
+		return ERR_INVAL;
+	}
+
+	for (i = s_first; i < s_last; i++)
+		if (info->protect[i]) {
+			printf("Error: sector %d is protected\n", i);
+			return ERR_PROTECTED;
+		}
+
+	fb = (uint16_t *)uncached(info->start[0]);
+
+	dcache_flush_unlocked();
+
+	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
+		printf("Erasing sector %3d...", i);
+
+		sb = (uint16_t *)uncached(info->start[i]);
+
+		flags = disable_interrupts();
+
+		start_time = get_timer(0);
+
+		/* Unlock sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x70, sb);
+
+		/* Erase sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x80, fb + 0x555);
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x30, sb);
+
+		/* Wait for completion */
+		ret = ERR_OK;
+		do {
+			/* TODO: Timeout */
+			status = readw(sb);
+		} while ((status != 0xffff) && !(status & 0x28));
+
+		writew(0xf0, fb);
+
+		/*
+		 * Make sure the command actually makes it to the bus
+		 * before we re-enable interrupts.
+		 */
+		readw(fb);
+
+		if (flags)
+			enable_interrupts();
+
+		if (status != 0xffff) {
+			printf("Flash erase error at address 0x%p: 0x%02x\n",
+			       sb, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (ctrlc())
+		printf("User interrupt!\n");
+
+	return ERR_OK;
+}
+
+int write_buff(flash_info_t *info, uchar *src,
+			   ulong addr, ulong count)
+{
+	unsigned long flags;
+	uint16_t *base, *p, *s, *end;
+	uint16_t word, status, status1;
+	int ret = ERR_OK;
+
+	if (addr < info->start[0]
+	    || (addr + count) > (info->start[0] + info->size)
+	    || (addr + count) < addr) {
+		puts("Error: invalid address range\n");
+		return ERR_INVAL;
+	}
+
+	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
+		puts("Error: misaligned source, destination or count\n");
+		return ERR_ALIGN;
+	}
+
+	base = (uint16_t *)uncached(info->start[0]);
+	end = (uint16_t *)uncached(addr + count);
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+	sync_write_buffer();
+
+	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
+	     p < end && !ctrlc(); p++, s++) {
+		word = *s;
+
+		writew(0xaa, base + 0x555);
+		writew(0x55, base + 0xaaa);
+		writew(0xa0, base + 0x555);
+		writew(word, p);
+
+		sync_write_buffer();
+
+		/* Wait for completion */
+		status1 = readw(p);
+		do {
+			/* TODO: Timeout */
+			status = status1;
+			status1 = readw(p);
+		} while (((status ^ status1) & 0x40)	/* toggled */
+			 && !(status1 & 0x28));		/* error bits */
+
+		/*
+		 * We'll need to check once again for toggle bit
+		 * because the toggle bit may stop toggling as I/O5
+		 * changes to "1" (ref at49bv642.pdf p9)
+		 */
+		status1 = readw(p);
+		status = readw(p);
+		if ((status ^ status1) & 0x40) {
+			printf("Flash write error at address 0x%p: "
+			       "0x%02x != 0x%02x\n",
+			       p, status,word);
+			ret = ERR_PROG_ERROR;
+			writew(0xf0, base);
+			readw(base);
+			break;
+		}
+
+		writew(0xf0, base);
+		readw(base);
+	}
+
+	if (flags)
+		enable_interrupts();
+
+	return ret;
+}
+
+#endif /* CONFIG_FAVR32_EZKIT_EXT_FLASH */