arm: Remove da830evm board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 0 insertions, 222 deletions

diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig
index 33bfcc3558..7d0de1d0fa 100644
--- a/board/davinci/da8xxevm/Kconfig
+++ b/board/davinci/da8xxevm/Kconfig
@@ -1,16 +1,3 @@
-if TARGET_DA830EVM
-
-config SYS_BOARD
-	default "da8xxevm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "da830evm"
-
-endif
-
 if TARGET_DA850EVM
 
 config SYS_BOARD
diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
deleted file mode 100644
index c40587ff09..0000000000
--- a/board/davinci/da8xxevm/da830evm.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
- *
- * Base on code from TI. Original Notices follow:
- *
- * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
- *
- * Modified for DA8xx EVM.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/davinci_misc.h>
-
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const struct pinmux_resource pinmuxes[] = {
-#ifdef CONFIG_SPI_FLASH
-	PINMUX_ITEM(spi0_pins_base),
-	PINMUX_ITEM(spi0_pins_scs0),
-	PINMUX_ITEM(spi0_pins_ena),
-#endif
-	PINMUX_ITEM(uart2_pins_txrx),
-	PINMUX_ITEM(i2c0_pins),
-#ifdef CONFIG_USB_DA8XX
-	PINMUX_ITEM(usb_pins),
-#endif
-#ifdef CONFIG_USE_NAND
-	PINMUX_ITEM(emifa_pins),
-	PINMUX_ITEM(emifa_pins_cs0),
-	PINMUX_ITEM(emifa_pins_cs2),
-	PINMUX_ITEM(emifa_pins_cs3),
-#endif
-#if defined(CONFIG_DRIVER_TI_EMAC)
-	PINMUX_ITEM(emac_pins_rmii),
-	PINMUX_ITEM(emac_pins_mdio),
-	PINMUX_ITEM(emac_pins_rmii_clk_source),
-#endif
-#ifdef CONFIG_DAVINCI_MMC
-	PINMUX_ITEM(mmc0_pins_8bit)
-#endif
-};
-
-static const struct lpsc_resource lpsc[] = {
-	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
-	{ DAVINCI_LPSC_SPI0 },	/* Serial Flash */
-	{ DAVINCI_LPSC_EMAC },	/* image download */
-	{ DAVINCI_LPSC_UART2 },	/* console */
-	{ DAVINCI_LPSC_GPIO },
-#ifdef CONFIG_DAVINCI_MMC
-	{ DAVINCI_LPSC_MMC_SD },
-#endif
-
-};
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.host_caps = MMC_MODE_8BIT,
-	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version = MMC_CTLR_VERSION_2,
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
-
-	printf("%x\n", mmc_sd0.input_clk);
-
-	/* Add slot-0 to mmc subsystem */
-	return davinci_mmc_init(bis, &mmc_sd0);
-}
-#endif
-
-int board_init(void)
-{
-#ifndef CONFIG_USE_IRQ
-	irq_init();
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-	/* EMIFA 100MHz clock select */
-	writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2,
-	       &davinci_syscfg_regs->cfgchip3);
-	/* NAND CS setup */
-	writel((DAVINCI_ABCR_WSETUP(0) |
-		DAVINCI_ABCR_WSTROBE(2) |
-		DAVINCI_ABCR_WHOLD(0) |
-		DAVINCI_ABCR_RSETUP(0) |
-		DAVINCI_ABCR_RSTROBE(2) |
-		DAVINCI_ABCR_RHOLD(0) |
-		DAVINCI_ABCR_TA(2) |
-		DAVINCI_ABCR_ASIZE_8BIT),
-	       &davinci_emif_regs->ab2cr);
-#endif
-
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/*
-	 * Power on required peripherals
-	 * ARM does not have access by default to PSC0 and PSC1
-	 * assuming here that the DSP bootloader has set the IOPU
-	 * such that PSC access is available to ARM
-	 */
-	if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
-		return 1;
-
-	/* setup the SUSPSRC for ARM to control emulation suspend */
-	writel(readl(&davinci_syscfg_regs->suspsrc) &
-	       ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
-		 DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
-		 DAVINCI_SYSCFG_SUSPSRC_UART2),
-	       &davinci_syscfg_regs->suspsrc);
-
-	/* configure pinmux settings */
-	if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
-		return 1;
-
-	/* enable the console UART */
-	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
-		DAVINCI_UART_PWREMU_MGMT_UTRST),
-	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
-
-	return(0);
-}
-
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_DRIVER_TI_EMAC)
-
-#define PHY_SW_I2C_ADDR	0x5f /* Address of PHY on i2c bus */
-
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
-	u_int8_t mac_addr[6];
-	u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
-	struct eth_device *dev;
-
-	/* Read Ethernet MAC address from EEPROM */
-	if (dvevm_read_mac_address(mac_addr))
-		/* set address env if not already set */
-		davinci_sync_env_enetaddr(mac_addr);
-
-	/* read the address back from env */
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr))
-		return -1;
-
-	/* enable the Ethernet switch in the 3 port PHY */
-	if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
-			switch_start_cmd, sizeof(switch_start_cmd))) {
-		printf("Ethernet switch start failed!\n");
-		return -1;
-	}
-
-	/* finally, initialise the driver */
-	if (!davinci_emac_initialize()) {
-		printf("Error: Ethernet init failed!\n");
-		return -1;
-	}
-
-	dev = eth_get_dev();
-
-	/* provide the resulting addr to the driver */
-	memcpy(dev->enetaddr, mac_addr, 6);
-	dev->write_hwaddr(dev);
-
-	return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */