arm: Remove dig297 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 182 deletions

diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
deleted file mode 100644
index 9d4c41b00b..0000000000
--- a/board/comelit/dig297/dig297.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * (C) Copyright 2011 Comelit Group SpA
- * Luca Ceresoli <luca.ceresoli@comelit.it>
- *
- * Based on board/ti/beagle/beagle.c:
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Sunil Kumar <sunilsaini05@gmail.com>
- *	Shashi Ranjan <shashiranjanmca05@gmail.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <khasim@ti.com>
- *
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/omap3-regs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include "dig297.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_CMD_NET
-static void setup_net_chip(void);
-
-#define NET_LAN9221_RESET_GPIO 12
-
-/* GPMC CS 5 connected to an SMSC LAN9220 ethernet controller */
-#define NET_LAN9220_GPMC_CONFIG1	(DEVICESIZE_16BIT)
-#define NET_LAN9220_GPMC_CONFIG2	(CSWROFFTIME(8) | \
-					 CSRDOFFTIME(7) | \
-					 ADVONTIME(1))
-#define NET_LAN9220_GPMC_CONFIG3	(ADVWROFFTIME(2) | \
-					 ADVRDOFFTIME(2) | \
-					 ADVONTIME(1))
-#define NET_LAN9220_GPMC_CONFIG4	(WEOFFTIME(8) | \
-					 WEONTIME(1) |  \
-					 OEOFFTIME(7)|	\
-					 OEONTIME(1))
-#define NET_LAN9220_GPMC_CONFIG5	(PAGEBURSTACCESSTIME(0) | \
-					 RDACCESSTIME(6)        | \
-					 WRCYCLETIME(0x1D)      | \
-					 RDCYCLETIME(0x1D))
-#define NET_LAN9220_GPMC_CONFIG6	((1 << 31)          | \
-					 WRACCESSTIME(0x1D) | \
-					 WRDATAONADMUXBUS(3))
-
-static const u32 gpmc_lan_config[] = {
-	NET_LAN9220_GPMC_CONFIG1,
-	NET_LAN9220_GPMC_CONFIG2,
-	NET_LAN9220_GPMC_CONFIG3,
-	NET_LAN9220_GPMC_CONFIG4,
-	NET_LAN9220_GPMC_CONFIG5,
-	NET_LAN9220_GPMC_CONFIG6,
-	/* CONFIG7: computed by enable_gpmc_cs_config() */
-};
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init();		/* in SRAM or SDRAM, finish GPMC */
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-	struct gpio *gpio1_base = (struct gpio *)OMAP34XX_GPIO1_BASE;
-	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
-
-	twl4030_power_init();
-	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-
-	/*
-	 * GPIO list
-	 * - 159 OUT (GPIO5+31): reset for remote camera interface connector.
-	 * - 19  OUT (GPIO1+19): integrated speaker amplifier (1=on, 0=shdn).
-	 * - 20  OUT (GPIO1+20): handset amplifier (1=on, 0=shdn).
-	 */
-
-	/* Configure GPIOs to output */
-	writel(~(GPIO19 | GPIO20), &gpio1_base->oe);
-	writel(~(GPIO31), &gpio5_base->oe);
-
-	/* Set GPIO values */
-	writel((GPIO19 | GPIO20), &gpio1_base->setdataout);
-	writel(0, &gpio5_base->setdataout);
-
-#if defined(CONFIG_CMD_NET)
-	setup_net_chip();
-#endif
-
-	dieid_num_r();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_DIG297();
-}
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-void board_mmc_power_init(void)
-{
-	twl4030_power_mmc_init(0);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- *	      Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	/* Configure GPMC registers */
-	enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
-			      CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-	       &ctrl_base->gpmc_nadv_ale);
-
-	/* Make GPIO 12 as output pin and send a magic pulse through it */
-	if (!gpio_request(NET_LAN9221_RESET_GPIO, "")) {
-		gpio_direction_output(NET_LAN9221_RESET_GPIO, 0);
-		gpio_set_value(NET_LAN9221_RESET_GPIO, 1);
-		udelay(1);
-		gpio_set_value(NET_LAN9221_RESET_GPIO, 0);
-		udelay(31000);	/* Should be >= 30ms according to datasheet */
-		gpio_set_value(NET_LAN9221_RESET_GPIO, 1);
-	}
-}
-#endif /* CONFIG_CMD_NET */
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-	return rc;
-}