arm: Remove wireless_space board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 266 deletions

diff --git a/board/LaCie/wireless_space/Kconfig b/board/LaCie/wireless_space/Kconfig
deleted file mode 100644
index 75a2fc5a75..0000000000
--- a/board/LaCie/wireless_space/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_WIRELESS_SPACE
-
-config SYS_BOARD
-	default "wireless_space"
-
-config SYS_VENDOR
-	default "LaCie"
-
-config SYS_CONFIG_NAME
-	default "wireless_space"
-
-endif
diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS
deleted file mode 100644
index c32ecb8b73..0000000000
--- a/board/LaCie/wireless_space/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-WIRELESS_SPACE BOARD
-M:	Albert ARIBAUD <albert.u.boot@aribaud.net>
-S:	Maintained
-F:	board/LaCie/wireless_space/
-F:	include/configs/wireless_space.h
-F:	configs/wireless_space_defconfig
diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile
deleted file mode 100644
index 90a84f4892..0000000000
--- a/board/LaCie/wireless_space/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
-#
-# Based on Kirkwood support:
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= wireless_space.o ../common/common.o
diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg
deleted file mode 100644
index 037248b3c6..0000000000
--- a/board/LaCie/wireless_space/kwbimage.cfg
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net>
-#
-# Based on netspace_v2 kwbimage.cfg:
-# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
-#
-# Based on Kirkwood support:
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-# Refer doc/README.kwbimage for more details about how-to configure
-# and create kirkwood boot image
-#
-
-# Boot Media configurations
-BOOT_FROM	nand	# Boot from NAND flash
-NAND_PAGE_SIZE 800
-
-# SOC registers configuration using bootrom header extension
-# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
-
-# Values taken from image original LaCie U-Boot header dump!
-
-# Configure RGMII-0 interface pad voltage to 1.8V
-DATA 0xFFD100e0 0x1B1B1B9B
-
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-DATA 0xFFD01400 0x43000c30	# DDR Configuration register
-
-DATA 0xFFD01404 0x37743000	# DDR Controller Control Low
-
-DATA 0xFFD01408 0x11012228	# DDR Timing (Low) (active cycles value +1)
-
-DATA 0xFFD0140C 0x00000A19	#  DDR Timing (High)
-
-DATA 0xFFD01410 0x0000CCCC	#  DDR Address Control
-
-DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
-
-DATA 0xFFD01418 0x00000000	#  DDR Operation
-
-DATA 0xFFD0141C 0x00000662	#  DDR Mode
-
-DATA 0xFFD01420 0x00000004	#  DDR Extended Mode
-
-DATA 0xFFD01424 0x0000F07F	#  DDR Controller Control High
-
-DATA 0xFFD01428 0x00096630	# DDR2 ODT Read Timing (default values)
-
-DATA 0xFFD0147C 0x00009663	# DDR2 ODT Write Timing (default values)
-
-DATA 0xFFD01504 0x0FFFFFF1	# CS[0]n Size
-DATA 0xFFD01508 0x00000000	# CS[1]n Base address to 0x0
-DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
-DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
-DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
-DATA 0xFFD01494 0x00120012	#  DDR ODT Control (Low)
-DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
-DATA 0xFFD0149C 0x0000E40F	# CPU ODT Control
-DATA 0xFFD01480 0x00000001	# DDR Initialization Control
-DATA 0xFFD20134 0x66666666
-DATA 0xFFD20138 0x66666666
-DATA 0xFFD10000 0x01112222
-DATA 0xFFD1000C 0x00000000
-DATA 0xFFD10104 0x00000000
-DATA 0xFFD10100 0x40000000
-# End of Header extension
-DATA 0x0 0x0
diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c
deleted file mode 100644
index 8620e4b5d1..0000000000
--- a/board/LaCie/wireless_space/wireless_space.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
- *
- * Based on Kirkwood support:
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/mpp.h>
-#include <asm/arch/gpio.h>
-
-#include "../common/common.h"
-#include "netdev.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* GPIO configuration: start FAN at low speed, USB and HDD */
-
-#define WIRELESS_SPACE_OE_LOW		0xFF006808
-#define WIRELESS_SPACE_OE_HIGH		0x0000F989
-#define WIRELESS_SPACE_OE_VAL_LOW	0x00010080
-#define WIRELESS_SPACE_OE_VAL_HIGH	0x00000240
-
-#define WIRELESS_SPACE_REAR_BUTTON	13
-#define WIRELESS_SPACE_FRONT_BUTTON	43
-
-const u32 kwmpp_config[] = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_GPIO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP15_SATA0_ACTn,
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_GE1_0,		/* Gigabit Ethernet 1 */
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
-	MPP28_GE1_8,
-	MPP29_GE1_9,
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
-	MPP34_GE1_14,
-	MPP35_GE1_15,
-	MPP36_GPIO,		/* Fan speed (bit 2) */
-	MPP37_GPIO,		/* Fan speed (bit 0) */
-	MPP38_GPIO,		/* Fan power */
-	MPP39_GPIO,		/* Fan rotation fail */
-	MPP40_GPIO,		/* Ethernet switch link */
-	MPP41_GPIO,		/* USB enable host vbus */
-	MPP42_GPIO,		/* LED clock control */
-	MPP43_GPIO,		/* WPS button (0=Pushed, 1=Released) */
-	MPP44_GPIO,		/* Red LED on/off */
-	MPP45_GPIO,		/* Red LED timer blink (on=off=100ms) */
-	MPP46_GPIO,		/* Green LED on/off */
-	MPP47_GPIO,		/* LED (blue, green) SATA activity blink */
-	MPP48_GPIO,		/* Blue LED on/off */
-	0
-};
-
-struct mv88e61xx_config swcfg = {
-	.name = "egiga0",
-	.vlancfg = MV88E61XX_VLANCFG_ROUTER,
-	.rgmii_delay = MV88E61XX_RGMII_DELAY_EN,
-	.led_init = MV88E61XX_LED_INIT_EN,
-	.mdip = MV88E61XX_MDIP_NOCHANGE,
-	.portstate = MV88E61XX_PORTSTT_FORWARDING,
-	.cpuport = 0x20,
-	.ports_enabled = 0x3F,
-};
-
-int board_early_init_f(void)
-{
-	/* Gpio configuration */
-	mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
-			  WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
-
-	/* Multi-Purpose Pins Functionality configuration */
-	kirkwood_mpp_conf(kwmpp_config, NULL);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* Machine number */
-	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
-
-	/* Boot parameters address */
-	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
-	return 0;
-}
-
-#if defined(CONFIG_MISC_INIT_R)
-int misc_init_r(void)
-{
-#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
-	if (!getenv("ethaddr")) {
-		uchar mac[6];
-		if (lacie_read_mac_address(mac) == 0)
-			eth_setenv_enetaddr("ethaddr", mac);
-	}
-#endif
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
-/* Configure and initialize PHY */
-void reset_phy(void)
-{
-	/* configure switch on egiga0 */
-	mv88e61xx_switch_initialize(&swcfg);
-}
-#endif
-
-#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD)
-/* Return GPIO button status */
-static int
-do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (strcmp(argv[1], "button") == 0) {
-		if (strcmp(argv[2], "rear") == 0)
-			/* invert GPIO result for intuitive while/until use */
-			return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON);
-		else if (strcmp(argv[2], "front") == 0)
-			return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON);
-		else
-			return -1;
-	} else {
-		return -1;
-	}
-}
-
-U_BOOT_CMD(ws, 3, 0, do_ws,
-	   "Return GPIO button status 0=off 1=on",
-	   "- ws button rear|front: test buttons' states\n"
-);
-#endif