dts: move device tree sources to arch/$(ARCH)/dts/

Unlike Linux Kernel, U-Boot historically had *.dts files under
board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/.

I think arch/$(ARCH)/dts dicretory is a better location
to store both *.dts and *.dtsi files.

For example, before this commit, board/xilinx/dts directory
had both Microblaze dts (microblaze-generic.dts) and
ARM dts (zynq-*.dts), which are totally unrelated.

This commit moves *.dts to arch/$(ARCH)/dts/ directories,
allowing us to describe nicely mutiple DTBs generation in the next commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

27 files changed, 2310 insertions, 0 deletions

diff --git a/arch/arm/dts/exynos5250-arndale.dts b/arch/arm/dts/exynos5250-arndale.dts
new file mode 100644
index 0000000000..202f2ea6ed
--- /dev/null
+++ b/arch/arm/dts/exynos5250-arndale.dts
@@ -0,0 +1,39 @@
+/*
+ * SAMSUNG Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+*/
+
+/dts-v1/;
+#include "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG Arndale board based on EXYNOS5250";
+	compatible = "samsung,arndale", "samsung,exynos5250";
+
+	aliases {
+		serial0 = "/serial@12C20000";
+		console = "/serial@12C20000";
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts
new file mode 100644
index 0000000000..9020382d97
--- /dev/null
+++ b/arch/arm/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,151 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		i2s = "/sound@3830000";
+	};
+
+	sromc@12250000 {
+		bank = <1>;
+		srom-timing = <1 9 12 1 6 1 1>;
+		width = <2>;
+		lan@5000000 {
+			compatible = "smsc,lan9215", "smsc,lan";
+			reg = <0x5000000 0x100>;
+			phy-mode = "mii";
+		};
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	sound@12d60000 {
+		status = "disabled";
+	};
+
+	i2c@12c70000 {
+		soundcodec@1a {
+			reg = <0x1a>;
+			compatible = "wolfson,wm8994-codec";
+		};
+	};
+
+	i2c@12c60000 {
+		pmic@9 {
+			reg = <0x9>;
+			compatible = "maxim,max77686_pmic";
+		};
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */
+	};
+};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
new file mode 100644
index 0000000000..9b48a0ccd8
--- /dev/null
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -0,0 +1,187 @@
+/*
+ * SAMSUNG Snow board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow", "samsung,exynos5250";
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		i2s = "/sound@3830000";
+	};
+
+	i2c4: i2c@12ca0000 {
+		cros-ec@1e {
+			reg = <0x1e>;
+			compatible = "google,cros-ec";
+			i2c-max-frequency = <100000>;
+			ec-interrupt = <&gpio 782 1>;
+		};
+
+		power-regulator@48 {
+			compatible = "ti,tps65090";
+			reg = <0x48>;
+		};
+	};
+
+	spi@131b0000 {
+		spi-max-frequency = <1000000>;
+		spi-deactivate-delay = <100>;
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-max-frequency = <5000000>;
+			ec-interrupt = <&gpio 782 1>;
+			optimise-flash-write;
+			status = "disabled";
+		};
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "max98095";
+		codec-enable-gpio = <&gpio 0xb7 0>;
+	};
+
+	sound@12d60000 {
+		status = "disabled";
+	};
+
+	i2c@12cd0000 {
+		soundcodec@22 {
+			reg = <0x22>;
+			compatible = "maxim,max98095-codec";
+		};
+	};
+
+	i2c@12c60000 {
+		pmic@9 {
+			reg = <0x9>;
+			compatible = "maxim,max77686_pmic";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	ehci@12110000 {
+		samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	cros-ec-keyb {
+		compatible = "google,cros-ec-keyb";
+		google,key-rows = <8>;
+		google,key-columns = <13>;
+		google,repeat-delay-ms = <240>;
+		google,repeat-rate-ms = <30>;
+		google,ghost-filter;
+		/*
+		 * Keymap entries take the form of 0xRRCCKKKK where
+		 * RR=Row CC=Column KKKK=Key Code
+		 * The values below are for a US keyboard layout and
+		 * are taken from the Linux driver. Note that the
+		 * 102ND key is not used for US keyboards.
+		 */
+		linux,keymap = <
+			/* CAPSLCK F1         B          F10     */
+			0x0001003a 0x0002003b 0x00030030 0x00040044
+			/* N       =          R_ALT      ESC     */
+			0x00060031 0x0008000d 0x000a0064 0x01010001
+			/* F4      G          F7         H       */
+			0x0102003e 0x01030022 0x01040041 0x01060023
+			/* '       F9         BKSPACE    L_CTRL  */
+			0x01080028 0x01090043 0x010b000e 0x0200001d
+			/* TAB     F3         T          F6      */
+			0x0201000f 0x0202003d 0x02030014 0x02040040
+			/* ]       Y          102ND      [       */
+			0x0205001b 0x02060015 0x02070056 0x0208001a
+			/* F8      GRAVE      F2         5       */
+			0x02090042 0x03010029 0x0302003c 0x03030006
+			/* F5      6          -          \       */
+			0x0304003f 0x03060007 0x0308000c 0x030b002b
+			/* R_CTRL  A          D          F       */
+			0x04000061 0x0401001e 0x04020020 0x04030021
+			/* S       K          J          ;       */
+			0x0404001f 0x04050025 0x04060024 0x04080027
+			/* L       ENTER      Z          C       */
+			0x04090026 0x040b001c 0x0501002c 0x0502002e
+			/* V       X          ,          M       */
+			0x0503002f 0x0504002d 0x05050033 0x05060032
+			/* L_SHIFT /          .          SPACE   */
+			0x0507002a 0x05080035 0x05090034 0x050B0039
+			/* 1       3          4          2       */
+			0x06010002 0x06020004 0x06030005 0x06040003
+			/* 8       7          0          9       */
+			0x06050009 0x06060008 0x0608000b 0x0609000a
+			/* L_ALT   DOWN       RIGHT      Q       */
+			0x060a0038 0x060b006c 0x060c006a 0x07010010
+			/* E       R          W          I       */
+			0x07020012 0x07030013 0x07040011 0x07050017
+			/* U       R_SHIFT    P          O       */
+			0x07060016 0x07070036 0x07080019 0x07090018
+			/* UP      LEFT    */
+			0x070b0067 0x070c0069>;
+	};
+};
diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts
new file mode 100644
index 0000000000..d73976356d
--- /dev/null
+++ b/arch/arm/dts/exynos5420-smdk5420.dts
@@ -0,0 +1,169 @@
+/*
+ * SAMSUNG SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos5420.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5420 board based on EXYNOS5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5";
+
+	config {
+		hwid = "smdk5420 TEST A-A 9382";
+	};
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		i2c8 = "/i2c@12e00000";
+		i2c9 = "/i2c@12e10000";
+		i2c10 = "/i2c@12e20000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		xhci0 = "/xhci@12000000";
+		xhci1 = "/xhci@12400000";
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* s2mps11 is on i2c bus 4 */
+	i2c@12ca0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pmic@66 {
+			reg = <0x66>;
+			compatible = "samsung,s2mps11-pmic";
+		};
+	};
+
+	spi@12d20000 { /* spi0 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+		};
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	sound@3830000 {
+		samsung,codec-type = "wm8994";
+	};
+
+	i2c@12c70000 {
+		soundcodec@1a {
+			reg = <0x1a>;
+			compatible = "wolfson,wm8994-codec";
+		};
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/dts/tegra114-dalmore.dts b/arch/arm/dts/tegra114-dalmore.dts
new file mode 100644
index 0000000000..435c01e9f6
--- /dev/null
+++ b/arch/arm/dts/tegra114-dalmore.dts
@@ -0,0 +1,71 @@
+/dts-v1/;
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA Dalmore";
+	compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000400";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000400 {
+		cd-gpios = <&gpio 170 1>; /* gpio PV2 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	sdhci@78000600 {
+		bus-width = <8>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		/* SPDIF_IN: USB_VBUS_EN1 */
+		nvidia,vbus-gpio = <&gpio 86 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/tegra20-colibri_t20_iris.dts b/arch/arm/dts/tegra20-colibri_t20_iris.dts
new file mode 100644
index 0000000000..c0e54af886
--- /dev/null
+++ b/arch/arm/dts/tegra20-colibri_t20_iris.dts
@@ -0,0 +1,45 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toradex Colibri T20";
+	compatible = "toradex,t20", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		usb2 = "/usb@c5004000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	usb@c5000000 {
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
+		nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+	};
+
+	usb@c5008000 {
+		nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+		nvidia,width = <8>;
+		nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "nand-flash";
+		};
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+		bus-width = <4>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts
new file mode 100644
index 0000000000..b115f87821
--- /dev/null
+++ b/arch/arm/dts/tegra20-harmony.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Harmony evaluation board";
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5004000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000200";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 23 0>;		/* PC7 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	};
+
+	sdhci@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		clock = <42430000>;
+		xres = <1024>;
+		yres = <600>;
+		left-margin = <138>;
+		right-margin = <34>;
+		hsync-len = <136>;
+		lower-margin = <4>;
+		upper-margin = <21>;
+		vsync-len = <4>;
+		hsync-active-high;
+		vsyncx-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 0>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>;	/* PB5 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
+		nvidia,panel-timings = <0 0 200 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-medcom-wide.dts b/arch/arm/dts/tegra20-medcom-wide.dts
new file mode 100644
index 0000000000..a9a07f9bcd
--- /dev/null
+++ b/arch/arm/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide";
+	compatible = "ad,medcom-wide", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	lcd_panel: panel {
+		clock = <61715000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <2>;
+		right-margin = <47>;
+		hsync-len = <136>;
+		lower-margin = <21>;
+		upper-margin = <11>;
+		vsync-len = <4>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+		nvidia,panel-timings = <0 0 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
new file mode 100644
index 0000000000..780203cfb3
--- /dev/null
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio 173 1>; /* gpio PV5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		/* PAZ00 has 1024x600 */
+		clock = <54030000>;
+		xres = <1024>;
+		yres = <600>;
+		right-margin = <160>;
+		left-margin = <24>;
+		hsync-len = <136>;
+		upper-margin = <3>;
+		lower-margin = <61>;
+		vsync-len = <6>;
+		hsync-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 0>;
+		nvidia,backlight-enable-gpios = <&gpio 164 0>;	/* PU4 */
+		nvidia,lvds-shutdown-gpios = <&gpio 102 0>;	/* PM6 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 4 0>;		/* PA4 */
+		nvidia,panel-timings = <400 4 203 17 15>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-plutux.dts b/arch/arm/dts/tegra20-plutux.dts
new file mode 100644
index 0000000000..20016f29bb
--- /dev/null
+++ b/arch/arm/dts/tegra20-plutux.dts
@@ -0,0 +1,45 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux";
+	compatible = "ad,plutux", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts
new file mode 100644
index 0000000000..c0e2e1e5fd
--- /dev/null
+++ b/arch/arm/dts/tegra20-seaboard.dts
@@ -0,0 +1,191 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Seaboard";
+	compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+	chosen {
+		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
+	};
+
+	aliases {
+		/* This defines the order of our ports */
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	/* This is not used in U-Boot, but is expected to be in kernel .dts */
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+
+			clk_32k: clock {
+				compatible = "fixed-clock";
+				/*
+				 * leave out for now due to CPP:
+				 * #clock-cells = <0>;
+				 */
+				clock-frequency = <32768>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 59 0>;		/* PH3 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+	};
+
+	kbc@7000e200 {
+		linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c
+			0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006
+			0x03010005 0x03020013 0x03030012 0x03040021 0x03050020
+			0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023
+			0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a
+			0x05010009 0x05020016 0x05030015 0x05040024 0x05050031
+			0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018
+			0x06030017 0x06040026 0x06050025 0x06060033 0x06070032
+			0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036
+			0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019
+			0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044
+			0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067
+			0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068
+			0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057
+			0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d
+			0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f
+			0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040
+			0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f
+			0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050
+			0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053
+			0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072
+			0x1d0700e1 0x1e000045 0x1e010046 0x1e020071
+			0x1f04008a>;
+		linux,fn-keymap = <0x05040002>;
+	};
+
+	emc@7000f400 {
+		emc-table@190000 {
+			reg = < 190000 >;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 190000 >;
+			nvidia,emc-registers = < 0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000 >;
+		};
+		emc-table@380000 {
+			reg = < 380000 >;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = < 380000 >;
+			nvidia,emc-registers = < 0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000 >;
+		};
+	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		/* Seaboard has 1366x768 */
+		clock = <70600000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <58>;
+		right-margin = <58>;
+		hsync-len = <58>;
+		lower-margin = <4>;
+		upper-margin = <4>;
+		vsync-len = <4>;
+		hsync-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 2 0>;
+		nvidia,backlight-enable-gpios = <&gpio 28 0>;	/* PD4 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
+		nvidia,panel-timings = <400 4 203 17 15>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-tamonten.dtsi b/arch/arm/dts/tegra20-tamonten.dtsi
new file mode 100644
index 0000000000..f379622c94
--- /dev/null
+++ b/arch/arm/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,500 @@
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <0 86 0x4>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/dts/tegra20-tec.dts b/arch/arm/dts/tegra20-tec.dts
new file mode 100644
index 0000000000..4c1b08d768
--- /dev/null
+++ b/arch/arm/dts/tegra20-tec.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x {
+		status = "okay";
+
+		dc@54200000 {
+			status = "okay";
+
+			rgb {
+				nvidia,panel = <&lcd_panel>;
+				status = "okay";
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	lcd_panel: panel {
+		clock = <33260000>;
+		xres = <800>;
+		yres = <480>;
+		left-margin = <120>;
+		right-margin = <120>;
+		hsync-len = <16>;
+		lower-margin = <15>;
+		upper-margin = <15>;
+		vsync-len = <15>;
+
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 0 500000>;
+		nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+		nvidia,panel-timings = <0 0 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts
new file mode 100644
index 0000000000..ee31476c1e
--- /dev/null
+++ b/arch/arm/dts/tegra20-trimslice.dts
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000000";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	serial@70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	spi@7000c380 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 121 1>; /* gpio PP1 */
+		wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+		bus-width = <4>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-ventana.dts b/arch/arm/dts/tegra20-ventana.dts
new file mode 100644
index 0000000000..1a526bab64
--- /dev/null
+++ b/arch/arm/dts/tegra20-ventana.dts
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x {
+		status = "okay";
+		dc@54200000 {
+			status = "okay";
+			rgb {
+				status = "okay";
+				nvidia,panel = <&lcd_panel>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	lcd_panel: panel {
+		clock = <72072000>;
+		xres = <1366>;
+		yres = <768>;
+		left-margin = <58>;
+		right-margin = <58>;
+		hsync-len = <58>;
+		lower-margin = <4>;
+		upper-margin = <4>;
+		vsync-len = <4>;
+		hsync-active-high;
+		vsync-active-high;
+		nvidia,bits-per-pixel = <16>;
+		nvidia,pwm = <&pwm 2 0>;
+		nvidia,backlight-enable-gpios = <&gpio 28 0>;	/* PD4 */
+		nvidia,lvds-shutdown-gpios = <&gpio 10 0>;	/* PB2 */
+		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
+		nvidia,panel-vdd-gpios = <&gpio 22 0>;		/* PC6 */
+		nvidia,panel-timings = <0 0 200 0 0>;
+	};
+};
diff --git a/arch/arm/dts/tegra20-whistler.dts b/arch/arm/dts/tegra20-whistler.dts
new file mode 100644
index 0000000000..eb92264f9d
--- /dev/null
+++ b/arch/arm/dts/tegra20-whistler.dts
@@ -0,0 +1,73 @@
+/dts-v1/;
+
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Whistler evaluation board";
+	compatible = "nvidia,whistler", "nvidia,tegra20";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		usb0 = "/usb@c5008000";
+		sdhci0 = "/sdhci@c8000600";
+		sdhci1 = "/sdhci@c8000400";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = < 0x00000000 0x20000000 >;
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+
+		pmic@3c {
+			compatible = "maxim,max8907b";
+			reg = <0x3c>;
+
+			clk_32k: clock {
+				compatible = "fixed-clock";
+				/*
+				 * leave out for now due to CPP:
+				 * #clock-cells = <0>;
+				 */
+				clock-frequency = <32768>;
+			};
+		};
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+		bus-width = <8>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+};
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
new file mode 100644
index 0000000000..a7cc93e93f
--- /dev/null
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Beaver";
+	compatible = "nvidia,beaver", "nvidia,tegra30";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7ff00000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts
new file mode 100644
index 0000000000..ea2cf76ff3
--- /dev/null
+++ b/arch/arm/dts/tegra30-cardhu.dts
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Cardhu";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	aliases {
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		nvidia,vbus-gpio = <&gpio 236 0>;	/* PDD4 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/tegra30-tamonten.dtsi b/arch/arm/dts/tegra30-tamonten.dtsi
new file mode 100644
index 0000000000..50d5762311
--- /dev/null
+++ b/arch/arm/dts/tegra30-tamonten.dtsi
@@ -0,0 +1,69 @@
+#include "tegra30.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten NG";
+	compatible = "ad,tamonten-ng", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	aliases {
+		i2c0 = "/i2c@7000c000";
+		i2c1 = "/i2c@7000c700";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000d000";
+		sdhci0 = "/sdhci@78000600";
+		sdhci1 = "/sdhci@78000400";
+		sdhci2 = "/sdhci@78000000";
+		usb0 = "/usb@7d008000";
+	};
+
+	/* GEN1 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* GEN2 */
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	/* CAM */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* DDC */
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* PWR */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* SD slot on the base board */
+	sdhci@78000400 {
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 67 0>; /* gpio PI3 */
+		bus-width = <4>;
+	};
+
+	/* EMMC on the COM module */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+};
diff --git a/arch/arm/dts/tegra30-tec-ng.dts b/arch/arm/dts/tegra30-tec-ng.dts
new file mode 100644
index 0000000000..8a69e818ca
--- /dev/null
+++ b/arch/arm/dts/tegra30-tec-ng.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "tegra30-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten™ NG Evaluation Carrier";
+	compatible = "ad,tec-ng", "nvidia,tegra30";
+
+	/* GEN2 */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* SD card slot */
+	sdhci@78000400 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
new file mode 100644
index 0000000000..6da71c116d
--- /dev/null
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx MicroZED board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
new file mode 100644
index 0000000000..667dc28256
--- /dev/null
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC702 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC702 Board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
new file mode 100644
index 0000000000..526fc8888b
--- /dev/null
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC706 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC706 Board";
+	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
new file mode 100644
index 0000000000..8b542a109b
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC770 XM010 Board";
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
new file mode 100644
index 0000000000..0379a07068
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC770 XM012 Board";
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
new file mode 100644
index 0000000000..a4f9e05fc0
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC770 XM013 Board";
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+};
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
new file mode 100644
index 0000000000..91a5deba4a
--- /dev/null
+++ b/arch/arm/dts/zynq-zed.dts
@@ -0,0 +1,14 @@
+/*
+ * Xilinx ZED board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZED Board";
+	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+};