ARM: tegra: Use mem size from MC rather than ODMDATA

In at least Tegra124, the Tegra memory controller (MC) has a register
that controls the memory size. Read this to determine the memory size
rather than requiring this to be redundantly encoded into the ODMDATA.
This way, changes to the BCT (i.e. MC configuration) automatically
updated SW's view of the memory size, without requiring manual changes
to the ODMDATA.

Future work potentially required:
* Clip the memory size to architectural limits; U-Boot probably doesn't
  and won't support either LPAE or Tegra's "swiss cheese" memory layout,
  at least one of which would be required for >2GB RAM.
* Subtract out any carveout required by firmware on future SoCs.

Based-on-work-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 17 insertions, 1 deletions

diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index 6a6faf4b27..433da09d10 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -27,11 +27,12 @@ enum {
 	UART_COUNT = 5,
 };
 
+#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \
+	defined(CONFIG_TEGRA114)
 /*
  * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0,
  * so we are using this value to identify memory size.
  */
-
 unsigned int query_sdram_size(void)
 {
 	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
@@ -72,6 +73,21 @@ unsigned int query_sdram_size(void)
 	}
 #endif
 }
+#else
+#include <asm/arch/mc.h>
+
+/* Read the RAM size directly from the memory controller */
+unsigned int query_sdram_size(void)
+{
+	struct mc_ctlr *const mc = (struct mc_ctlr *)NV_PA_MC_BASE;
+	u32 size_mb;
+
+	size_mb = readl(&mc->mc_emem_cfg);
+	debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", size_mb);
+
+	return size_mb * 1024 * 1024;
+}
+#endif
 
 int dram_init(void)
 {