summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/armv7
diff options
context:
space:
mode:
authorR Sricharan <r.sricharan@ti.com>2013-03-04 20:04:45 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-03-28 09:10:58 +0100
commitde63ac278cbaaa387da3efaf0b21b819c2b0c496 (patch)
tree0fd5fac28bf5733062dee5a14881508569f4d709 /arch/arm/cpu/armv7
parent96fdbec2f96c9e11758c8742409069eeef841722 (diff)
downloadblackbird-obmc-uboot-de63ac278cbaaa387da3efaf0b21b819c2b0c496.tar.gz
blackbird-obmc-uboot-de63ac278cbaaa387da3efaf0b21b819c2b0c496.zip
ARM: mmu: Set domain permissions to client access
The 'XN' execute never bit is set in the pagetables. This will prevent speculative prefetches to non executable regions. But the domain permissions are set as master in the DACR register. So the pagetable attribute for 'XN' is not effective. Change the permissions to client. This fixes lot of speculative prefetch aborts seen on OMAP5 secure devices. Signed-off-by: R Sricharan <r.sricharan@ti.com> Tested-by: Vincent Stehle <v-stehle@ti.com> Cc: Vincent Stehle <v-stehle@ti.com> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Diffstat (limited to 'arch/arm/cpu/armv7')
-rw-r--r--arch/arm/cpu/armv7/cache_v7.c3
-rw-r--r--arch/arm/cpu/armv7/omap-common/hwinit-common.c35
2 files changed, 38 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c
index 5f6d0396f3..8748c145c4 100644
--- a/arch/arm/cpu/armv7/cache_v7.c
+++ b/arch/arm/cpu/armv7/cache_v7.c
@@ -340,6 +340,9 @@ void mmu_page_table_flush(unsigned long start, unsigned long stop)
{
}
+void arm_init_domains(void)
+{
+}
#endif /* #ifndef CONFIG_SYS_DCACHE_OFF */
#ifndef CONFIG_SYS_ICACHE_OFF
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 05ff2e868f..70d16a8160 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -34,6 +34,12 @@
#include <asm/emif.h>
#include <asm/omap_common.h>
#include <linux/compiler.h>
+#include <asm/cache.h>
+#include <asm/system.h>
+
+#define ARMV7_DCACHE_WRITEBACK 0xe
+#define ARMV7_DOMAIN_CLIENT 1
+#define ARMV7_DOMAIN_MASK (0x3 << 0)
DECLARE_GLOBAL_DATA_PTR;
@@ -269,4 +275,33 @@ void enable_caches(void)
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
+
+void dram_bank_mmu_setup(int bank)
+{
+ bd_t *bd = gd->bd;
+ int i;
+
+ u32 start = bd->bi_dram[bank].start >> 20;
+ u32 size = bd->bi_dram[bank].size >> 20;
+ u32 end = start + size;
+
+ debug("%s: bank: %d\n", __func__, bank);
+ for (i = start; i < end; i++)
+ set_section_dcache(i, ARMV7_DCACHE_WRITEBACK);
+
+}
+
+void arm_init_domains(void)
+{
+ u32 reg;
+
+ reg = get_dacr();
+ /*
+ * Set DOMAIN to client access so that all permissions
+ * set in pagetables are validated by the mmu.
+ */
+ reg &= ~ARMV7_DOMAIN_MASK;
+ reg |= ARMV7_DOMAIN_CLIENT;
+ set_dacr(reg);
+}
#endif
OpenPOWER on IntegriCloud