ARM: AM43xx: GP_EVM: Add support for DDR3

GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH).
Adding details for the same.
Below is the brief description of DDR3 init sequence(SW leveling):
-> Enable VTT regulator
-> Configure VTP
-> Configure DDR IO settings
-> Disable initialization and refreshes until EMIF registers are programmed.
-> Program Timing registers
-> Program leveling registers
-> Program PHY control and Temp alert and ZQ config registers.
-> Enable initialization and refreshes and configure SDRAM CONFIG register

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

1 files changed, 0 insertions, 14 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 5a3f2858cd..cd6289b4fc 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -50,20 +50,6 @@ inline u32 emif_num(u32 base)
 		return 0;
 }
 
-/*
- * Get SDRAM type connected to EMIF.
- * Assuming similar SDRAM parts are connected to both EMIF's
- * which is typically the case. So it is sufficient to get
- * SDRAM type from EMIF1.
- */
-u32 emif_sdram_type()
-{
-	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
-
-	return (readl(&emif->emif_sdram_config) &
-		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
-}
-
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
 	u32 mr;