summaryrefslogtreecommitdiffstats
path: root/README
diff options
context:
space:
mode:
authorMatthew McClintock <msm@freescale.com>2006-06-28 10:41:37 -0500
committerJon Loeliger <jdl@freescale.com>2006-08-09 13:50:11 -0500
commit0267768eddc5ca7bc1865bc40c866829ac5efbfe (patch)
tree62f10b7bbdd53e9018ebd0f04888dcc893d75ab3 /README
parentf73e73ba0e422e6f79030d77286dd57becaee16f (diff)
downloadblackbird-obmc-uboot-0267768eddc5ca7bc1865bc40c866829ac5efbfe.tar.gz
blackbird-obmc-uboot-0267768eddc5ca7bc1865bc40c866829ac5efbfe.zip
* Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
Diffstat (limited to 'README')
-rw-r--r--README54
1 files changed, 54 insertions, 0 deletions
diff --git a/README b/README
index 5ed30f27c9..0fda03f3c2 100644
--- a/README
+++ b/README
@@ -447,6 +447,11 @@ The following options need to be configured:
Board code has addition modification that it wants to make
to the flat device tree before handing it off to the kernel
+ CONFIG_OF_BOOT_CPU
+
+ This define fills in the correct boot cpu in the boot
+ param header, the default value is zero if undefined.
+
- Serial Ports:
CFG_PL010_SERIAL
@@ -3013,6 +3018,55 @@ format!) to the "bootm" command:
bash#
+Boot Linux and pass a flat device tree:
+-----------
+
+First, U-Boot must be compiled with the appropriate defines. See the section
+titled "Linux Kernel Interface" above for a more in depth explanation. The
+following is an example of how to start a kernel and pass an updated
+flat device tree:
+
+=> print oftaddr
+oftaddr=0x300000
+=> print oft
+oft=oftrees/mpc8540ads.dtb
+=> tftp $oftaddr $oft
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.101
+Filename 'oftrees/mpc8540ads.dtb'.
+Load address: 0x300000
+Loading: #
+done
+Bytes transferred = 4106 (100a hex)
+=> tftp $loadaddr $bootfile
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.2
+Filename 'uImage'.
+Load address: 0x200000
+Loading:############
+done
+Bytes transferred = 1029407 (fb51f hex)
+=> print loadaddr
+loadaddr=200000
+=> print oftaddr
+oftaddr=0x300000
+=> bootm $loadaddr - $oftaddr
+## Booting image at 00200000 ...
+ Image Name: Linux-2.6.17-dirty
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 1029343 Bytes = 1005.2 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+Booting using flat device tree at 0x300000
+Using MPC85xx ADS machine description
+Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
+[snip]
+
+
More About U-Boot Image Types:
------------------------------
OpenPOWER on IntegriCloud