Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 44 insertions, 16 deletions

diff --git a/Makefile b/Makefile
index 86546a286a..d3766b9017 100644
--- a/Makefile
+++ b/Makefile
@@ -231,8 +231,8 @@ endif
 
 OBJS  = $(CPUDIR)/start.o
 ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
@@ -241,7 +241,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -293,7 +293,10 @@ LIBS-y += drivers/net/libnet.o
 LIBS-y += drivers/net/phy/libphy.o
 LIBS-y += drivers/pci/libpci.o
 LIBS-y += drivers/pcmcia/libpcmcia.o
-LIBS-y += drivers/power/libpower.o
+LIBS-y += drivers/power/libpower.o \
+	drivers/power/fuel_gauge/libfuel_gauge.o \
+	drivers/power/pmic/libpmic.o \
+	drivers/power/battery/libbattery.o
 LIBS-y += drivers/spi/libspi.o
 LIBS-y += drivers/dfu/libdfu.o
 ifeq ($(CPU),mpc83xx)
@@ -319,6 +322,7 @@ LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
 LIBS-y += drivers/usb/host/libusb_host.o
 LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-y += drivers/usb/phy/libusb_phy.o
 LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
 LIBS-y += drivers/video/libvideo.o
@@ -386,12 +390,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
 	@actual=`wc -c $@ | awk '{print $$1}'`; \
-	limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 	if test $$actual -gt $$limit; then \
-		echo "$@ exceeds file size limit:"; \
-		echo "  limit:  $$limit bytes"; \
-		echo "  actual: $$actual bytes"; \
-		echo "  excess: $$((actual - limit)) bytes"; \
+		echo "$@ exceeds file size limit:" >&2 ; \
+		echo "  limit:  $$limit bytes" >&2 ; \
+		echo "  actual: $$actual bytes" >&2 ; \
+		echo "  excess: $$((actual - limit)) bytes" >&2; \
 		exit 1; \
 	fi
 else
@@ -404,6 +408,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
 # enable combined SPL/u-boot/dtb rules for tegra
@@ -445,9 +450,18 @@ $(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:	$(obj)u-boot.bin
 		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_UBOOT_START) \
 		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
@@ -471,14 +485,15 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
-$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
-		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
-		rm $(obj)u-boot-ubl.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
+		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
+		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
+
 $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
 			-T aisimage \
@@ -529,6 +544,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
 		rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
 		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -638,6 +656,16 @@ checkthumb:
 		echo '*** Your board is configured for THUMB mode.'; \
 		false; \
 	fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+	@if test $(call cc-version) -lt 0400; then \
+		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+		false; \
+	fi
+
 #
 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 #
@@ -811,7 +839,7 @@ clean:
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
-	@$(MAKE) -C doc/DocBook/ cleandocs
+	@$(MAKE) -s -C doc/DocBook/ cleandocs
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
 		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \