arm: Remove mx51_efikamx, mx51_efikasb boards

These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

11 files changed, 0 insertions, 1253 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6365e8f900..4d85e36a67 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,10 +493,6 @@ config TARGET_MX53SMD
 	bool "Support mx53smd"
 	select CPU_V7
 
-config TARGET_MX51_EFIKAMX
-	bool "Support mx51_efikamx"
-	select CPU_V7
-
 config TARGET_VISION2
 	bool "Support vision2"
 	select CPU_V7
@@ -801,7 +797,6 @@ source "board/freescale/mx53evk/Kconfig"
 source "board/freescale/mx53loco/Kconfig"
 source "board/freescale/mx53smd/Kconfig"
 source "board/freescale/vf610twr/Kconfig"
-source "board/genesi/mx51_efikamx/Kconfig"
 source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hale/tt01/Kconfig"
diff --git a/board/genesi/mx51_efikamx/Kconfig b/board/genesi/mx51_efikamx/Kconfig
deleted file mode 100644
index 355702a4b6..0000000000
--- a/board/genesi/mx51_efikamx/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_MX51_EFIKAMX
-
-config SYS_BOARD
-	default "mx51_efikamx"
-
-config SYS_VENDOR
-	default "genesi"
-
-config SYS_SOC
-	default "mx5"
-
-config SYS_CONFIG_NAME
-	default "mx51_efikamx"
-
-endif
diff --git a/board/genesi/mx51_efikamx/MAINTAINERS b/board/genesi/mx51_efikamx/MAINTAINERS
deleted file mode 100644
index f1398c4926..0000000000
--- a/board/genesi/mx51_efikamx/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MX51_EFIKAMX BOARD
-#M:	-
-S:	Maintained
-F:	board/genesi/mx51_efikamx/
-F:	include/configs/mx51_efikamx.h
-F:	configs/mx51_efikamx_defconfig
-F:	configs/mx51_efikasb_defconfig
diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile
deleted file mode 100644
index 87f5f9ede1..0000000000
--- a/board/genesi/mx51_efikamx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2010, Marek Vasut <marek.vasut@gmail.com>
-#
-# BASED ON: imx51evk
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2009 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= efikamx.o efikamx-usb.o
diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c
deleted file mode 100644
index 9dfd24961a..0000000000
--- a/board/genesi/mx51_efikamx/efikamx-usb.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <usb.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx51.h>
-#include <asm/gpio.h>
-#include <usb/ehci-fsl.h>
-#include <usb/ulpi.h>
-#include <errno.h>
-
-#include "../../../drivers/usb/host/ehci.h"
-
-/*
- * Configure the USB H1 and USB H2 IOMUX
- */
-void setup_iomux_usb(void)
-{
-	static const iomux_v3_cfg_t usb_h1_pads[] = {
-		MX51_PAD_USBH1_CLK__USBH1_CLK,
-		MX51_PAD_USBH1_DIR__USBH1_DIR,
-		MX51_PAD_USBH1_STP__USBH1_STP,
-		MX51_PAD_USBH1_NXT__USBH1_NXT,
-		MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-		MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-		MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-		MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-		MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-		MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-		MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-		MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	};
-
-	static const iomux_v3_cfg_t usb_pads[] = {
-		MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */
-		MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */
-		NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */
-		NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */
-		NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */
-	};
-
-	imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads));
-
-	if (machine_is_efikasb()) {
-		static const iomux_v3_cfg_t usb_h2_pads[] = {
-			MX51_PAD_EIM_A24__USBH2_CLK,
-			MX51_PAD_EIM_A25__USBH2_DIR,
-			MX51_PAD_EIM_A26__USBH2_STP,
-			MX51_PAD_EIM_A27__USBH2_NXT,
-			MX51_PAD_EIM_D16__USBH2_DATA0,
-			MX51_PAD_EIM_D17__USBH2_DATA1,
-			MX51_PAD_EIM_D18__USBH2_DATA2,
-			MX51_PAD_EIM_D19__USBH2_DATA3,
-			MX51_PAD_EIM_D20__USBH2_DATA4,
-			MX51_PAD_EIM_D21__USBH2_DATA5,
-			MX51_PAD_EIM_D22__USBH2_DATA6,
-			MX51_PAD_EIM_D23__USBH2_DATA7,
-		};
-
-		imx_iomux_v3_setup_multiple_pads(usb_h2_pads,
-						 ARRAY_SIZE(usb_h2_pads));
-	}
-
-	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
-}
-
-/*
- * Enable devices connected to USB BUSes
- */
-static void efika_usb_enable_devices(void)
-{
-	/* Enable Bluetooth */
-	gpio_direction_output(IMX_GPIO_NR(2, 11), 0);
-	udelay(10000);
-	gpio_set_value(IMX_GPIO_NR(2, 11), 1);
-
-	/* Enable WiFi */
-	gpio_direction_output(IMX_GPIO_NR(2, 16), 1);
-	udelay(10000);
-
-	/* Reset the WiFi chip */
-	gpio_direction_output(IMX_GPIO_NR(2, 10), 0);
-	udelay(10000);
-	gpio_set_value(IMX_GPIO_NR(2, 10), 1);
-}
-
-/*
- * Reset USB HUB (or HUBs on EfikaSB)
- */
-static void efika_usb_hub_reset(void)
-{
-	/* HUB reset */
-	gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
-	udelay(1000);
-	gpio_set_value(IMX_GPIO_NR(1, 5), 0);
-	udelay(1000);
-	gpio_set_value(IMX_GPIO_NR(1, 5), 1);
-}
-
-/*
- * Reset USB PHY (or PHYs on EfikaSB)
- */
-static void efika_usb_phy_reset(void)
-{
-	/* SMSC 3317 PHY reset */
-	gpio_direction_output(IMX_GPIO_NR(2, 9), 0);
-	udelay(1000);
-	gpio_set_value(IMX_GPIO_NR(2, 9), 1);
-}
-
-static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
-				iomux_v3_cfg_t stp_pad_gpio,
-				iomux_v3_cfg_t stp_pad_usb)
-{
-	int ret;
-	struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
-	struct ulpi_viewport ulpi_vp;
-
-	imx_iomux_v3_setup_pad(stp_pad_gpio);
-	gpio_direction_output(stp_gpio, 0);
-	udelay(1000);
-	gpio_set_value(stp_gpio, 1);
-	udelay(1000);
-
-	imx_iomux_v3_setup_pad(stp_pad_usb);
-	udelay(10000);
-
-	ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
-	ulpi_vp.port_num = 0;
-
-	ret = ulpi_init(&ulpi_vp);
-	if (ret) {
-		printf("Efika USB ULPI initialization failed\n");
-		return;
-	}
-
-	/* ULPI set flags */
-	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl,
-			ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN |
-			ULPI_OTG_EXTVBUSIND);
-	ulpi_write(&ulpi_vp, &ulpi->function_ctrl,
-			ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL |
-			ULPI_FC_SUSPENDM);
-	ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0);
-
-	/* Set VBus */
-	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	/*
-	 * Set VBusChrg
-	 *
-	 * NOTE: This violates USB specification, but otherwise, USB on Efika
-	 * doesn't work.
-	 */
-	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
-}
-
-int board_ehci_hcd_init(int port)
-{
-	/* Init iMX51 EHCI */
-	efika_usb_phy_reset();
-	efika_usb_hub_reset();
-	efika_usb_enable_devices();
-
-	return 0;
-}
-
-/* This overrides a weak function */
-void mx5_ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
-			   uint32_t *reg)
-{
-	uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT);
-	struct usb_ehci *ehci = (struct usb_ehci *)port;
-	struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
-	struct ulpi_viewport ulpi_vp;
-
-	ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
-	ulpi_vp.port_num = 0;
-
-	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
-
-	mdelay(50);
-
-	/* terminate the reset */
-	*reg = ehci_readl(status_reg);
-	*reg |= EHCI_PS_PE;
-}
-
-void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
-{
-	uint32_t tmp;
-
-	if (port == 0) {
-		/* Adjust UTMI PHY frequency to 24MHz */
-		tmp = readl(OTG_BASE_ADDR + 0x80c);
-		tmp = (tmp & ~0x3) | 0x01;
-		writel(tmp, OTG_BASE_ADDR + 0x80c);
-	} else if (port == 1) {
-		efika_ehci_init(ehci, IMX_GPIO_NR(1, 27),
-				MX51_PAD_USBH1_STP__GPIO1_27,
-				MX51_PAD_USBH1_STP__USBH1_STP);
-	} else if ((port == 2) && machine_is_efikasb()) {
-		efika_ehci_init(ehci, IMX_GPIO_NR(2, 20),
-				MX51_PAD_EIM_A26__GPIO2_20,
-				MX51_PAD_EIM_A26__USBH2_STP);
-	}
-
-	if (port)
-		mdelay(10);
-}
-
-/*
- * Ethernet on the Smarttop is on the USB bus. Rather than give an error about
- * "CPU Net Initialization Failed", just pass this test since no other settings
- * are required. Smartbook doesn't have built-in Ethernet but we will let it
- * pass anyway considering someone may have plugged in a USB stick and all
- * they need to do is run "usb start".
- */
-int board_eth_init(bd_t *bis)
-{
-	return 0;
-}
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
deleted file mode 100644
index 6ba55cd08a..0000000000
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- * Copyright (C) 2009 Freescale Semiconductor, Inc.
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2009-2012 Genesi USA, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx51.h>
-#include <asm/gpio.h>
-#include <asm/errno.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/imx-common/spi.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <mc13892.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Compile-time error checking
- */
-#ifndef	CONFIG_MXC_SPI
-#error "CONFIG_MXC_SPI not set, this is essential for board's operation!"
-#endif
-
-/*
- * Board revisions
- *
- * Note that we get these revisions here for convenience, but we only set
- * up for the production model Smarttop (1.3) and Smartbook (2.0).
- *
- */
-#define	EFIKAMX_BOARD_REV_11	0x1
-#define	EFIKAMX_BOARD_REV_12	0x2
-#define	EFIKAMX_BOARD_REV_13	0x3
-#define	EFIKAMX_BOARD_REV_14	0x4
-
-#define	EFIKASB_BOARD_REV_13	0x1
-#define	EFIKASB_BOARD_REV_20	0x2
-
-/*
- * Board identification
- */
-static u32 get_mx_rev(void)
-{
-	u32 rev = 0;
-	/*
-	 * Retrieve board ID:
-	 *
-	 *  gpio: 16 17 11
-	 *  ==============
-	 *	r1.1:  1+ 1  1
-	 *	r1.2:  1  1  0
-	 *	r1.3:  1  0  1
-	 *	r1.4:  1  0  0
-	 *
-	 * + note: r1.1 does not strap this pin properly so it needs to
-	 *         be hacked or ignored.
-	 */
-
-	/* set to 1 in order to get correct value on board rev 1.1 */
-	gpio_direction_output(IMX_GPIO_NR(3, 16), 1);
-	gpio_direction_input(IMX_GPIO_NR(3, 11));
-	gpio_direction_input(IMX_GPIO_NR(3, 16));
-	gpio_direction_input(IMX_GPIO_NR(3, 17));
-
-	rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0;
-	rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1;
-	rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2;
-
-	return (~rev & 0x7) + 1;
-}
-
-static iomux_v3_cfg_t const efikasb_revision_pads[] = {
-	MX51_PAD_EIM_CS3__GPIO2_28,
-	MX51_PAD_EIM_CS4__GPIO2_29,
-};
-
-static inline u32 get_sb_rev(void)
-{
-	u32 rev = 0;
-
-	imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads,
-				ARRAY_SIZE(efikasb_revision_pads));
-	gpio_direction_input(IMX_GPIO_NR(2, 28));
-	gpio_direction_input(IMX_GPIO_NR(2, 29));
-
-	rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0;
-	rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1;
-
-	return rev;
-}
-
-inline uint32_t get_efikamx_rev(void)
-{
-	if (machine_is_efikamx())
-		return get_mx_rev();
-	else if (machine_is_efikasb())
-		return get_sb_rev();
-}
-
-u32 get_board_rev(void)
-{
-	return get_cpu_rev() | (get_efikamx_rev() << 8);
-}
-
-/*
- * DRAM initialization
- */
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-						PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-/*
- * UART configuration
- */
-static iomux_v3_cfg_t const efikamx_uart_pads[] = {
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-};
-
-/*
- * SPI configuration
- */
-static iomux_v3_cfg_t const efikamx_spi_pads[] = {
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-	MX51_PAD_GPIO1_6__GPIO1_6,
-};
-
-#define EFIKAMX_SPI_SS0		IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_SS1		IMX_GPIO_NR(4, 25)
-#define EFIKAMX_PMIC_IRQ	IMX_GPIO_NR(1, 6)
-
-/*
- * PMIC configuration
- */
-#ifdef CONFIG_MXC_SPI
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
-	return (bus == 0 && cs == 1) ? 121 : -1;
-}
-
-static void power_init(void)
-{
-	unsigned int val;
-	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
-	struct pmic *p;
-	int ret;
-
-	ret = pmic_init(CONFIG_FSL_PMIC_BUS);
-	if (ret)
-		return;
-
-	p = pmic_get("FSL_PMIC");
-	if (!p)
-		return;
-
-	/* Write needed to Power Gate 2 register */
-	pmic_reg_read(p, REG_POWER_MISC, &val);
-	val &= ~PWGT2SPIEN;
-	pmic_reg_write(p, REG_POWER_MISC, val);
-
-	/* Externally powered */
-	pmic_reg_read(p, REG_CHARGE, &val);
-	val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
-	pmic_reg_write(p, REG_CHARGE, val);
-
-	/* power up the system first */
-	pmic_reg_write(p, REG_POWER_MISC, PWUP);
-
-	/* Set core voltage to 1.1V */
-	pmic_reg_read(p, REG_SW_0, &val);
-	val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
-	pmic_reg_write(p, REG_SW_0, val);
-
-	/* Setup VCC (SW2) to 1.25 */
-	pmic_reg_read(p, REG_SW_1, &val);
-	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
-	pmic_reg_write(p, REG_SW_1, val);
-
-	/* Setup 1V2_DIG1 (SW3) to 1.25 */
-	pmic_reg_read(p, REG_SW_2, &val);
-	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
-	pmic_reg_write(p, REG_SW_2, val);
-	udelay(50);
-
-	/* Raise the core frequency to 800MHz */
-	writel(0x0, &mxc_ccm->cacrr);
-
-	/* Set switchers in Auto in NORMAL mode & STANDBY mode */
-	/* Setup the switcher mode for SW1 & SW2*/
-	pmic_reg_read(p, REG_SW_4, &val);
-	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
-		(SWMODE_MASK << SWMODE2_SHIFT)));
-	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
-		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
-	pmic_reg_write(p, REG_SW_4, val);
-
-	/* Setup the switcher mode for SW3 & SW4 */
-	pmic_reg_read(p, REG_SW_5, &val);
-	val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
-		(SWMODE_MASK << SWMODE4_SHIFT)));
-	val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
-		(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
-	pmic_reg_write(p, REG_SW_5, val);
-
-	/* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */
-	pmic_reg_read(p, REG_SETTING_0, &val);
-	val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
-	val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6;
-	pmic_reg_write(p, REG_SETTING_0, val);
-
-	/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
-	pmic_reg_read(p, REG_SETTING_1, &val);
-	val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
-	val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15;
-	pmic_reg_write(p, REG_SETTING_1, val);
-
-	/* Enable VGEN1, VGEN2, VDIG, VPLL */
-	pmic_reg_read(p, REG_MODE_0, &val);
-	val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN;
-	pmic_reg_write(p, REG_MODE_0, val);
-
-	/* Configure VGEN3 and VCAM regulators to use external PNP */
-	val = VGEN3CONFIG | VCAMCONFIG;
-	pmic_reg_write(p, REG_MODE_1, val);
-	udelay(200);
-
-	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
-	val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
-		VVIDEOEN | VAUDIOEN | VSDEN;
-	pmic_reg_write(p, REG_MODE_1, val);
-
-	pmic_reg_read(p, REG_POWER_CTL2, &val);
-	val |= WDIRESET;
-	pmic_reg_write(p, REG_POWER_CTL2, val);
-
-	udelay(2500);
-}
-#else
-static inline void power_init(void) { }
-#endif
-
-/*
- * MMC configuration
- */
-#ifdef CONFIG_FSL_ESDHC
-
-struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR},
-	{MMC_SDHC2_BASE_ADDR},
-};
-
-static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	MX51_PAD_GPIO1_1__SD1_WP,
-};
-
-#define EFIKAMX_SDHC1_WP	IMX_GPIO_NR(1, 1)
-
-static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
-	MX51_PAD_GPIO1_0__SD1_CD,
-	NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL),
-};
-
-#define EFIKAMX_SDHC1_CD	IMX_GPIO_NR(1, 0)
-#define EFIKASB_SDHC1_CD	IMX_GPIO_NR(2, 27)
-
-static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = {
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-	MX51_PAD_GPIO1_7__SD2_WP,
-	MX51_PAD_GPIO1_8__SD2_CD,
-};
-
-#define EFIKASB_SDHC2_CD	IMX_GPIO_NR(1, 8)
-#define EFIKASB_SDHC2_WP	IMX_GPIO_NR(1, 7)
-
-static inline uint32_t efikamx_mmc_getcd(u32 base)
-{
-	if (base == MMC_SDHC1_BASE_ADDR)
-		if (machine_is_efikamx())
-			return EFIKAMX_SDHC1_CD;
-		else
-			return EFIKASB_SDHC1_CD;
-	else
-		return EFIKASB_SDHC2_CD;
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
-	int ret = !gpio_get_value(cd);
-
-	return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	int ret;
-
-	/*
-	 * All Efika MX boards use eSDHC1 with a common write-protect GPIO
-	 */
-	imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads,
-					ARRAY_SIZE(efikamx_sdhc1_pads));
-	gpio_direction_input(EFIKAMX_SDHC1_WP);
-
-	/*
-	 * Smartbook and Smarttop differ on the location of eSDHC1
-	 * carrier-detect GPIO
-	 */
-	if (machine_is_efikamx()) {
-		imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
-		gpio_direction_input(EFIKAMX_SDHC1_CD);
-	} else if (machine_is_efikasb()) {
-		imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
-		gpio_direction_input(EFIKASB_SDHC1_CD);
-	}
-
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-
-	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-
-	if (machine_is_efikasb()) {
-
-		imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads,
-						ARRAY_SIZE(efikasb_sdhc2_pads));
-		gpio_direction_input(EFIKASB_SDHC2_CD);
-		gpio_direction_input(EFIKASB_SDHC2_WP);
-		if (!ret)
-			ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
-	}
-
-	return ret;
-}
-#endif
-
-/*
- * PATA
- */
-static iomux_v3_cfg_t const efikamx_pata_pads[] = {
-	MX51_PAD_NANDF_WE_B__PATA_DIOW,
-	MX51_PAD_NANDF_RE_B__PATA_DIOR,
-	MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
-	MX51_PAD_NANDF_CLE__PATA_RESET_B,
-	MX51_PAD_NANDF_WP_B__PATA_DMACK,
-	MX51_PAD_NANDF_RB0__PATA_DMARQ,
-	MX51_PAD_NANDF_RB1__PATA_IORDY,
-	MX51_PAD_GPIO_NAND__PATA_INTRQ,
-	MX51_PAD_NANDF_CS2__PATA_CS_0,
-	MX51_PAD_NANDF_CS3__PATA_CS_1,
-	MX51_PAD_NANDF_CS4__PATA_DA_0,
-	MX51_PAD_NANDF_CS5__PATA_DA_1,
-	MX51_PAD_NANDF_CS6__PATA_DA_2,
-	MX51_PAD_NANDF_D15__PATA_DATA15,
-	MX51_PAD_NANDF_D14__PATA_DATA14,
-	MX51_PAD_NANDF_D13__PATA_DATA13,
-	MX51_PAD_NANDF_D12__PATA_DATA12,
-	MX51_PAD_NANDF_D11__PATA_DATA11,
-	MX51_PAD_NANDF_D10__PATA_DATA10,
-	MX51_PAD_NANDF_D9__PATA_DATA9,
-	MX51_PAD_NANDF_D8__PATA_DATA8,
-	MX51_PAD_NANDF_D7__PATA_DATA7,
-	MX51_PAD_NANDF_D6__PATA_DATA6,
-	MX51_PAD_NANDF_D5__PATA_DATA5,
-	MX51_PAD_NANDF_D4__PATA_DATA4,
-	MX51_PAD_NANDF_D3__PATA_DATA3,
-	MX51_PAD_NANDF_D2__PATA_DATA2,
-	MX51_PAD_NANDF_D1__PATA_DATA1,
-	MX51_PAD_NANDF_D0__PATA_DATA0,
-};
-
-/*
- * EHCI USB
- */
-#ifdef	CONFIG_CMD_USB
-extern void setup_iomux_usb(void);
-#else
-static inline void setup_iomux_usb(void) { }
-#endif
-
-/*
- * LED configuration
- *
- * Smarttop LED pad config is done in the DCD
- *
- */
-#define EFIKAMX_LED_BLUE	IMX_GPIO_NR(3, 13)
-#define EFIKAMX_LED_GREEN	IMX_GPIO_NR(3, 14)
-#define EFIKAMX_LED_RED		IMX_GPIO_NR(3, 15)
-
-static iomux_v3_cfg_t const efikasb_led_pads[] = {
-	MX51_PAD_GPIO1_3__GPIO1_3,
-	MX51_PAD_EIM_CS0__GPIO2_25,
-};
-
-#define EFIKASB_CAPSLOCK_LED	IMX_GPIO_NR(2, 25)
-#define EFIKASB_MESSAGE_LED	IMX_GPIO_NR(1, 3) /* Note: active low */
-
-/*
- * Board initialization
- */
-int board_early_init_f(void)
-{
-	if (machine_is_efikasb()) {
-		imx_iomux_v3_setup_multiple_pads(efikasb_led_pads,
-						ARRAY_SIZE(efikasb_led_pads));
-		gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
-		gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
-	} else if (machine_is_efikamx()) {
-		/*
-		 * Set up GPIO directions for LEDs.
-		 * IOMUX has been done in the DCD already.
-		 * Turn the red LED on for pre-relocation code.
-		 */
-		gpio_direction_output(EFIKAMX_LED_BLUE, 0);
-		gpio_direction_output(EFIKAMX_LED_GREEN, 0);
-		gpio_direction_output(EFIKAMX_LED_RED, 1);
-	}
-
-	/*
-	 * Both these pad configurations for UART and SPI are kind of redundant
-	 * since they are the Power-On Defaults for the i.MX51. But, it seems we
-	 * should make absolutely sure that they are set up correctly.
-	 */
-	imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads,
-					ARRAY_SIZE(efikamx_uart_pads));
-	imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads,
-					ARRAY_SIZE(efikamx_spi_pads));
-
-	/* not technically required for U-Boot operation but do it anyway. */
-	gpio_direction_input(EFIKAMX_PMIC_IRQ);
-	/* Deselect both CS for now, otherwise NOR doesn't probe properly. */
-	gpio_direction_output(EFIKAMX_SPI_SS0, 0);
-	gpio_direction_output(EFIKAMX_SPI_SS1, 1);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	if (machine_is_efikamx()) {
-		/*
-		 * Set up Blue LED for "In U-Boot" status.
-		 * We're all relocated and ready to U-Boot!
-		 */
-		gpio_set_value(EFIKAMX_LED_RED, 0);
-		gpio_set_value(EFIKAMX_LED_GREEN, 0);
-		gpio_set_value(EFIKAMX_LED_BLUE, 1);
-	}
-
-	power_init();
-
-	imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads,
-					ARRAY_SIZE(efikamx_pata_pads));
-	setup_iomux_usb();
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	u32 rev = get_efikamx_rev();
-
-	printf("Board: Genesi Efika MX ");
-	if (machine_is_efikamx())
-		printf("Smarttop (1.%i)\n", rev & 0xf);
-	else if (machine_is_efikasb())
-		printf("Smartbook\n");
-
-	return 0;
-}
diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg
deleted file mode 100644
index e2911eb401..0000000000
--- a/board/genesi/mx51_efikamx/imximage_mx.cfg
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (C) 2009 Pegatron Corporation
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2009-2012 Genesi USA, Inc.
- *
- * BASED ON: imx51evk
- *
- * (C) Copyright 2009
- * Stefano Babic DENX Software Engineering sbabic@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM	spi
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *	Addr-type register length (1,2 or 4 bytes)
- *	Address	  absolute address of the register
- *	value	  value to be stored in the register
- */
-/*
- * Essential GPIO settings to be done as early as possible
- * PCBIDn pad settings are all the defaults except #2 which needs HVE off
- */
-DATA 4 0x73fa8134 0x3			# PCBID0 ALT3 GPIO 3_16
-DATA 4 0x73fa8130 0x3			# PCBID1 ALT3 GPIO 3_17
-DATA 4 0x73fa8128 0x3			# PCBID2 ALT3 GPIO 3_11
-DATA 4 0x73fa8504 0xe4			# PCBID2 PAD ~HVE
-DATA 4 0x73fa8198 0x3			# LED0 ALT3 GPIO 3_13
-DATA 4 0x73fa81c4 0x3			# LED1 ALT3 GPIO 3_14
-DATA 4 0x73fa81c8 0x3			# LED2 ALT3 GPIO 3_15
-
-/* DDR bus IOMUX PAD settings */
-DATA 4 0x73fa850c 0x20c5		# SDODT1
-DATA 4 0x73fa8510 0x20c5		# SDODT0
-DATA 4 0x73fa84ac 0xc5			# SDWE
-DATA 4 0x73fa84b0 0xc5			# SDCKE0
-DATA 4 0x73fa84b4 0xc5			# SDCKE1
-DATA 4 0x73fa84cc 0xc5			# DRAM_CS0
-DATA 4 0x73fa84d0 0xc5			# DRAM_CS1
-DATA 4 0x73fa882c 0x2			# DRAM_B4
-DATA 4 0x73fa88a4 0x2			# DRAM_B0
-DATA 4 0x73fa88ac 0x2			# DRAM_B1
-DATA 4 0x73fa88b8 0x2			# DRAM_B2
-DATA 4 0x73fa84d4 0xc5			# DRAM_DQM0
-DATA 4 0x73fa84d8 0xc5			# DRAM_DQM1
-DATA 4 0x73fa84dc 0xc5			# DRAM_DQM2
-DATA 4 0x73fa84e0 0xc5			# DRAM_DQM3
-
-/*
- * Setting DDR for micron
- * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
- * CAS=3 BL=4
- */
-/* ESDCTL_ESDCTL0 */
-DATA 4 0x83fd9000 0x82a20000
-/* ESDCTL_ESDCTL1 */
-DATA 4 0x83fd9008 0x82a20000
-/* ESDCTL_ESDMISC */
-DATA 4 0x83fd9010 0xcaaaf6d0
-/* ESDCTL_ESDCFG0 */
-DATA 4 0x83fd9004 0x3f3574aa
-/* ESDCTL_ESDCFG1 */
-DATA 4 0x83fd900c 0x3f3574aa
-
-/* Init DRAM on CS0 */
-/* ESDCTL_ESDSCR */
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x0000801a
-DATA 4 0x83fd9014 0x0000801b
-DATA 4 0x83fd9014 0x00448019
-DATA 4 0x83fd9014 0x07328018
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x06328018
-DATA 4 0x83fd9014 0x03808019
-DATA 4 0x83fd9014 0x00408019
-DATA 4 0x83fd9014 0x00008000
-
-/* Init DRAM on CS1 */
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x0000801e
-DATA 4 0x83fd9014 0x0000801f
-DATA 4 0x83fd9014 0x0000801d
-DATA 4 0x83fd9014 0x0732801c
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x0632801c
-DATA 4 0x83fd9014 0x0380801d
-DATA 4 0x83fd9014 0x0040801d
-DATA 4 0x83fd9014 0x00008004
-
-/* Write to CTL0 */
-DATA 4 0x83fd9000 0xb2a20000
-/* Write to CTL1 */
-DATA 4 0x83fd9008 0xb2a20000
-/* ESDMISC */
-DATA 4 0x83fd9010 0x000ad6d0
-/* ESDCTL_ESDCDLYGD */
-DATA 4 0x83fd9034 0x90000000
-DATA 4 0x83fd9014 0x00000000
diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg
deleted file mode 100644
index a67d41b42e..0000000000
--- a/board/genesi/mx51_efikamx/imximage_sb.cfg
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2009 Pegatron Corporation
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2009-2012 Genesi USA, Inc.
- *
- * BASED ON: imx51evk
- *
- * (C) Copyright 2009
- * Stefano Babic DENX Software Engineering sbabic@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM	spi
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *	Addr-type register length (1,2 or 4 bytes)
- *	Address	  absolute address of the register
- *	value	  value to be stored in the register
-*/
-/* DDR bus IOMUX PAD settings */
-DATA 4 0x73fa88a0 0x200		# GRP_INMODE1
-DATA 4 0x73fa850c 0x20c5	# SDODT1
-DATA 4 0x73fa8510 0x20c5	# SDODT0
-DATA 4 0x73fa8848 0x4		# DDR_A1
-DATA 4 0x73fa84b8 0xe7		# DRAM_SDCLK
-DATA 4 0x73fa84bc 0x45		# DRAM_SDQS0
-DATA 4 0x73fa84c0 0x45		# DRAM_SDQS1
-DATA 4 0x73fa84c4 0x45		# DRAM_SDQS2
-DATA 4 0x73fa84c8 0x45		# DRAM_SDQS3
-DATA 4 0x73fa8820 0x0		# DDRPKS
-DATA 4 0x73fa84ac 0xe5		# SDWE
-DATA 4 0x73fa84b0 0xe5		# SDCKE0
-DATA 4 0x73fa84b4 0xe5		# SDCKE1
-DATA 4 0x73fa84cc 0xe5		# DRAM_CS0
-DATA 4 0x73fa84d0 0xe4		# DRAM_CS1
-
-/*
- * Setting DDR for micron
- * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
- * CAS=3 BL=4
- */
-/* ESDCTL_ESDCTL0 */
-DATA 4 0x83fd9000 0x82a20000
-/* ESDCTL_ESDCTL1 */
-DATA 4 0x83fd9008 0x82a20000
-/* ESDCTL_ESDMISC */
-DATA 4 0x83fd9010 0xcaaaf6d0
-/* ESDCTL_ESDCFG0 */
-DATA 4 0x83fd9004 0x333574aa
-/* ESDCTL_ESDCFG1 */
-DATA 4 0x83fd900c 0x333574aa
-
-/* Init DRAM on CS0 */
-/* ESDCTL_ESDSCR */
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x0000801a
-DATA 4 0x83fd9014 0x0000801b
-DATA 4 0x83fd9014 0x00448019
-DATA 4 0x83fd9014 0x07328018
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x06328018
-DATA 4 0x83fd9014 0x03808019
-DATA 4 0x83fd9014 0x00408019
-DATA 4 0x83fd9014 0x00008000
-
-/* Init DRAM on CS1 */
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x0000801e
-DATA 4 0x83fd9014 0x0000801f
-DATA 4 0x83fd9014 0x0000801d
-DATA 4 0x83fd9014 0x0732801c
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x0632801c
-DATA 4 0x83fd9014 0x0380801d
-DATA 4 0x83fd9014 0x0042801d
-DATA 4 0x83fd9014 0x00008004
-
-/* Write to CTL0 */
-DATA 4 0x83fd9000 0xb2a20000
-/* Write to CTL1 */
-DATA 4 0x83fd9008 0xb2a20000
-/* ESDMISC */
-DATA 4 0x83fd9010 0xcaaaf6d0
-/* ESDCTL_ESDCDLYGD */
-DATA 4 0x83fd9034 0x90000000
-DATA 4 0x83fd9014 0x00000000
diff --git a/configs/mx51_efikamx_defconfig b/configs/mx51_efikamx_defconfig
deleted file mode 100644
index a88c223064..0000000000
--- a/configs/mx51_efikamx_defconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_MX51_EFIKAMX=y
-CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SPI_FLASH=y
-CONFIG_SYS_PROMPT="Efika> "
diff --git a/configs/mx51_efikasb_defconfig b/configs/mx51_efikasb_defconfig
deleted file mode 100644
index 1bc7c00cb8..0000000000
--- a/configs/mx51_efikasb_defconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_MX51_EFIKAMX=y
-CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SPI_FLASH=y
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
deleted file mode 100644
index 373cfcbc79..0000000000
--- a/include/configs/mx51_efikamx.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the MX51EVK Board
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-/* An i.MX51 CPU */
-#define CONFIG_MX51
-
-#define	machine_is_efikamx()	(CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKAMX)
-#define	machine_is_efikasb()	(CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKASB)
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_TEXT_BASE		0x97800000
-
-#define	CONFIG_SYS_ICACHE_OFF
-#define	CONFIG_SYS_DCACHE_OFF
-
-/*
- * Bootloader Components Configuration
- */
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
-
-/*
- * Environmental settings
- */
-
-#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_ENV_SECT_SIZE		(1 * 64 * 1024)
-#define CONFIG_ENV_SIZE			(4 * 1024)
-
-/*
- * ATAG setup
- */
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_OF_LIBFDT		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE		UART1_BASE
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_MXC_GPIO
-
-/*
- * SPI Interface
- */
-#ifdef CONFIG_CMD_SPI
-
-#define CONFIG_HARD_SPI
-#define CONFIG_MXC_SPI
-#define CONFIG_DEFAULT_SPI_BUS		1
-#define CONFIG_DEFAULT_SPI_MODE		(SPI_MODE_0 | SPI_CS_HIGH)
-
-/* SPI FLASH */
-#ifdef CONFIG_CMD_SF
-
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SF_DEFAULT_CS		1
-#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
-#define CONFIG_SF_DEFAULT_SPEED		25000000
-
-#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_MAX_HZ		25000000
-#define CONFIG_ENV_SPI_MODE		(SPI_MODE_0)
-#define CONFIG_FSL_ENV_IN_SF
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SYS_NO_FLASH
-
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-/* SPI PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_SPI
-#define CONFIG_POWER_FSL
-#define CONFIG_FSL_PMIC_BUS		0
-#define CONFIG_FSL_PMIC_CS		(0 | 120 << 8)
-#define CONFIG_FSL_PMIC_CLK		25000000
-#define CONFIG_FSL_PMIC_MODE		(SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_FSL_PMIC_BITLEN	32
-#define CONFIG_RTC_MC13XXX
-#endif
-
-/*
- * MMC Configs
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	2
-#endif
-
-/*
- * ATA/IDE
- */
-#ifdef CONFIG_CMD_IDE
-#define CONFIG_LBA48
-#undef CONFIG_IDE_LED
-#undef CONFIG_IDE_RESET
-
-#define CONFIG_MX51_PATA
-
-#define __io
-
-#define CONFIG_SYS_IDE_MAXBUS		1
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0x83fe0000
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0xa0
-#define CONFIG_SYS_ATA_REG_OFFSET	0xa0
-#define CONFIG_SYS_ATA_ALT_OFFSET	0xd8
-
-#define CONFIG_SYS_ATA_STRIDE		4
-
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MXC_ATA_PIO_MODE		4
-#endif
-
-/*
- * USB
- */
-#define	CONFIG_CMD_USB
-#ifdef	CONFIG_CMD_USB
-#define	CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define	CONFIG_USB_EHCI_MX5
-#define	CONFIG_USB_ULPI
-#define	CONFIG_USB_ULPI_VIEWPORT
-#define	CONFIG_MXC_USB_PORT	1
-#if	(CONFIG_MXC_USB_PORT == 0)
-#define	CONFIG_MXC_USB_PORTSC	(1 << 28)
-#define	CONFIG_MXC_USB_FLAGS	MXC_EHCI_INTERNAL_PHY
-#else
-#define	CONFIG_MXC_USB_PORTSC	(2 << 30)
-#define	CONFIG_MXC_USB_FLAGS	0
-#endif
-#define	CONFIG_EHCI_IS_TDI
-#define	CONFIG_USB_STORAGE
-#define	CONFIG_USB_HOST_ETHER
-#define	CONFIG_USB_KEYBOARD
-#define	CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-#define CONFIG_PREBOOT
-/* USB NET */
-#ifdef	CONFIG_CMD_NET
-#define	CONFIG_USB_ETHER_ASIX
-#define	CONFIG_CMD_PING
-#define	CONFIG_CMD_DHCP
-#endif
-#endif /* CONFIG_CMD_USB */
-
-/*
- * Filesystems
- */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_LOADADDR			0x90800000
-
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0x90000000
-#define CONFIG_SYS_MEMTEST_END		0x90010000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE		(512 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
-#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
-#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_DDR_CLKSEL		0
-#define CONFIG_SYS_CLKTL_CBCDR		0x59E35145
-#define CONFIG_SYS_MAIN_PWR_ON
-
-#endif