Merge branch 'master' of git://git.denx.de/u-boot-spi

12 files changed, 224 insertions, 453 deletions

diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index b6983e60d7..055f44e8e4 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -434,6 +434,56 @@ static u32 get_mmdc_ch0_clk(void)
 }
 #endif
 
+#ifdef CONFIG_MX6SX
+/* qspi_num can be from 0 - 1 */
+void enable_qspi_clk(int qspi_num)
+{
+	u32 reg = 0;
+	/* Enable QuadSPI clock */
+	switch (qspi_num) {
+	case 0:
+		/* disable the clock gate */
+		clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
+
+		/* set 50M  : (50 = 396 / 2 / 4) */
+		reg = readl(&imx_ccm->cscmr1);
+		reg &= ~(MXC_CCM_CSCMR1_QSPI1_PODF_MASK |
+			 MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK);
+		reg |= ((1 << MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET) |
+			(2 << MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET));
+		writel(reg, &imx_ccm->cscmr1);
+
+		/* enable the clock gate */
+		setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
+		break;
+	case 1:
+		/*
+		 * disable the clock gate
+		 * QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate,
+		 * disable both of them.
+		 */
+		clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
+			     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+
+		/* set 50M  : (50 = 396 / 2 / 4) */
+		reg = readl(&imx_ccm->cs2cdr);
+		reg &= ~(MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
+			 MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
+			 MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK);
+		reg |= (MXC_CCM_CS2CDR_QSPI2_CLK_PRED(0x1) |
+			MXC_CCM_CS2CDR_QSPI2_CLK_SEL(0x3));
+		writel(reg, &imx_ccm->cs2cdr);
+
+		/*enable the clock gate*/
+		setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
+			     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+		break;
+	default:
+		break;
+	}
+}
+#endif
+
 #ifdef CONFIG_FEC_MXC
 int enable_fec_anatop_clock(enum enet_freq freq)
 {
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index 226a4cde17..a6de5ee4bc 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -67,5 +67,6 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num);
 void enable_ipu_clock(void);
 int enable_fec_anatop_clock(enum enet_freq freq);
 void enable_enet_clk(unsigned char enable);
+void enable_qspi_clk(int qspi_num);
 void enable_thermal_clk(void);
 #endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 5314298a1d..c968600b77 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -92,10 +92,10 @@
 #define AIPS3_END_ADDR			0x022FFFFF
 #define WEIM_ARB_BASE_ADDR              0x50000000
 #define WEIM_ARB_END_ADDR               0x57FFFFFF
-#define QSPI1_ARB_BASE_ADDR             0x60000000
-#define QSPI1_ARB_END_ADDR              0x6FFFFFFF
-#define QSPI2_ARB_BASE_ADDR             0x70000000
-#define QSPI2_ARB_END_ADDR              0x7FFFFFFF
+#define QSPI0_AMBA_BASE                0x60000000
+#define QSPI0_AMBA_END                 0x6FFFFFFF
+#define QSPI1_AMBA_BASE                0x70000000
+#define QSPI1_AMBA_END                 0x7FFFFFFF
 #else
 #define SATA_ARB_BASE_ADDR              0x02200000
 #define SATA_ARB_END_ADDR               0x02203FFF
@@ -262,8 +262,8 @@
 #define AUDMUX_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x58000)
 #ifdef CONFIG_MX6SX
 #define SAI2_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x5C000)
-#define QSPI1_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
-#define QSPI2_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x64000)
+#define QSPI0_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define QSPI1_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x64000)
 #else
 #define MIPI_CSI2_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x5C000)
 #define MIPI_DSI_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x60000)
diff --git a/board/freescale/mx6slevk/MAINTAINERS b/board/freescale/mx6slevk/MAINTAINERS
index 660af91aee..18d31a8d8b 100644
--- a/board/freescale/mx6slevk/MAINTAINERS
+++ b/board/freescale/mx6slevk/MAINTAINERS
@@ -4,3 +4,4 @@ S:	Maintained
 F:	board/freescale/mx6slevk/
 F:	include/configs/mx6slevk.h
 F:	configs/mx6slevk_defconfig
+F:	configs/mx6slevk_spinor_defconfig
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index fd8bc72827..5cc58ac868 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -371,6 +371,42 @@ int board_mmc_init(bd_t *bis)
 	return 0;
 }
 
+#ifdef CONFIG_FSL_QSPI
+
+#define QSPI_PAD_CTRL1	\
+	(PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \
+	 PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm)
+
+static iomux_v3_cfg_t const quadspi_pads[] = {
+	MX6_PAD_NAND_WP_B__QSPI2_A_DATA_0	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_READY_B__QSPI2_A_DATA_1	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_CE0_B__QSPI2_A_DATA_2	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_CE1_B__QSPI2_A_DATA_3	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_ALE__QSPI2_A_SS0_B		| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_CLE__QSPI2_A_SCLK		| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_DATA07__QSPI2_A_DQS	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_DATA01__QSPI2_B_DATA_0	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_DATA00__QSPI2_B_DATA_1	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_WE_B__QSPI2_B_DATA_2	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_RE_B__QSPI2_B_DATA_3	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_DATA03__QSPI2_B_SS0_B	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_DATA02__QSPI2_B_SCLK	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+	MX6_PAD_NAND_DATA05__QSPI2_B_DQS	| MUX_PAD_CTRL(QSPI_PAD_CTRL1),
+};
+
+int board_qspi_init(void)
+{
+	/* Set the iomux */
+	imx_iomux_v3_setup_multiple_pads(quadspi_pads,
+					 ARRAY_SIZE(quadspi_pads));
+
+	/* Set the clock */
+	enable_qspi_clk(1);
+
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* Address of boot parameters */
@@ -380,6 +416,10 @@ int board_init(void)
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 #endif
 
+#ifdef CONFIG_FSL_QSPI
+	board_qspi_init();
+#endif
+
 	return 0;
 }
 
diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig
new file mode 100644
index 0000000000..93efe73014
--- /dev/null
+++ b/configs/mx6slevk_spinor_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6SLEVK=y
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 15789a07d8..c61b784e17 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -17,6 +17,5 @@ obj-$(CONFIG_SPI_FLASH) += sf_probe.o
 #endif
 obj-$(CONFIG_CMD_SF) += sf.o
 obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o
-obj-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o
 obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
 obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c
deleted file mode 100644
index a23032cca5..0000000000
--- a/drivers/mtd/spi/ramtron.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * (C) Copyright 2010
- * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Note: RAMTRON SPI FRAMs are ferroelectric, nonvolatile RAMs
- * with an interface identical to SPI flash devices.
- * However since they behave like RAM there are no delays or
- * busy polls required. They can sustain read or write at the
- * allowed SPI bus speed, which can be 40 MHz for some devices.
- *
- * Unfortunately some RAMTRON devices do not have a means of
- * identifying them. They will leave the SO line undriven when
- * the READ-ID command is issued. It is therefore mandatory
- * that the MISO line has a proper pull-up, so that READ-ID
- * will return a row of 0xff. This 0xff pseudo-id will cause
- * probes by all vendor specific functions that are designed
- * to handle it. If the MISO line is not pulled up, READ-ID
- * could return any random noise, even mimicking another
- * device.
- *
- * We use CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- * to define which device will be assumed after a simple status
- * register verify. This method is prone to false positive
- * detection and should therefore be the last to be tried.
- * Enter it in the last position in the table in spi_flash.c!
- *
- * The define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC both activates
- * compilation of the special handler and defines the device
- * to assume.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include "sf_internal.h"
-
-/*
- * Properties of supported FRAMs
- * Note: speed is currently not used because we have no method to deliver that
- * value to the upper layers
- */
-struct ramtron_spi_fram_params {
-	u32	size;		/* size in bytes */
-	u8	addr_len;	/* number of address bytes */
-	u8	merge_cmd;	/* some address bits are in the command byte */
-	u8	id1;		/* device ID 1 (family, density) */
-	u8	id2;		/* device ID 2 (sub, rev, rsvd) */
-	u32	speed;		/* max. SPI clock in Hz */
-	const char *name;	/* name for display and/or matching */
-};
-
-struct ramtron_spi_fram {
-	struct spi_flash flash;
-	const struct ramtron_spi_fram_params *params;
-};
-
-static inline struct ramtron_spi_fram *to_ramtron_spi_fram(struct spi_flash
-							     *flash)
-{
-	return container_of(flash, struct ramtron_spi_fram, flash);
-}
-
-/*
- * table describing supported FRAM chips:
- * chips without RDID command must have the values 0xff for id1 and id2
- */
-static const struct ramtron_spi_fram_params ramtron_spi_fram_table[] = {
-	{
-		.size = 32*1024,
-		.addr_len = 2,
-		.merge_cmd = 0,
-		.id1 = 0x22,
-		.id2 = 0x00,
-		.speed = 40000000,
-		.name = "FM25V02",
-	},
-	{
-		.size = 32*1024,
-		.addr_len = 2,
-		.merge_cmd = 0,
-		.id1 = 0x22,
-		.id2 = 0x01,
-		.speed = 40000000,
-		.name = "FM25VN02",
-	},
-	{
-		.size = 64*1024,
-		.addr_len = 2,
-		.merge_cmd = 0,
-		.id1 = 0x23,
-		.id2 = 0x00,
-		.speed = 40000000,
-		.name = "FM25V05",
-	},
-	{
-		.size = 64*1024,
-		.addr_len = 2,
-		.merge_cmd = 0,
-		.id1 = 0x23,
-		.id2 = 0x01,
-		.speed = 40000000,
-		.name = "FM25VN05",
-	},
-	{
-		.size = 128*1024,
-		.addr_len = 3,
-		.merge_cmd = 0,
-		.id1 = 0x24,
-		.id2 = 0x00,
-		.speed = 40000000,
-		.name = "FM25V10",
-	},
-	{
-		.size = 128*1024,
-		.addr_len = 3,
-		.merge_cmd = 0,
-		.id1 = 0x24,
-		.id2 = 0x01,
-		.speed = 40000000,
-		.name = "FM25VN10",
-	},
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
-	{
-		.size = 256*1024,
-		.addr_len = 3,
-		.merge_cmd = 0,
-		.id1 = 0xff,
-		.id2 = 0xff,
-		.speed = 40000000,
-		.name = "FM25H20",
-	},
-#endif
-};
-
-static int ramtron_common(struct spi_flash *flash,
-		u32 offset, size_t len, void *buf, u8 command)
-{
-	struct ramtron_spi_fram *sn = to_ramtron_spi_fram(flash);
-	u8 cmd[4];
-	int cmd_len;
-	int ret;
-
-	if (sn->params->addr_len == 3 && sn->params->merge_cmd == 0) {
-		cmd[0] = command;
-		cmd[1] = offset >> 16;
-		cmd[2] = offset >> 8;
-		cmd[3] = offset;
-		cmd_len = 4;
-	} else if (sn->params->addr_len == 2 && sn->params->merge_cmd == 0) {
-		cmd[0] = command;
-		cmd[1] = offset >> 8;
-		cmd[2] = offset;
-		cmd_len = 3;
-	} else {
-		printf("SF: unsupported addr_len or merge_cmd\n");
-		return -1;
-	}
-
-	/* claim the bus */
-	ret = spi_claim_bus(flash->spi);
-	if (ret) {
-		debug("SF: Unable to claim SPI bus\n");
-		return ret;
-	}
-
-	if (command == CMD_PAGE_PROGRAM) {
-		/* send WREN */
-		ret = spi_flash_cmd_write_enable(flash);
-		if (ret < 0) {
-			debug("SF: Enabling Write failed\n");
-			goto releasebus;
-		}
-	}
-
-	/* do the transaction */
-	if (command == CMD_PAGE_PROGRAM)
-		ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, buf, len);
-	else
-		ret = spi_flash_cmd_read(flash->spi, cmd, cmd_len, buf, len);
-	if (ret < 0)
-		debug("SF: Transaction failed\n");
-
-releasebus:
-	/* release the bus */
-	spi_release_bus(flash->spi);
-	return ret;
-}
-
-static int ramtron_read(struct spi_flash *flash,
-		u32 offset, size_t len, void *buf)
-{
-	return ramtron_common(flash, offset, len, buf,
-		CMD_READ_ARRAY_SLOW);
-}
-
-static int ramtron_write(struct spi_flash *flash,
-		u32 offset, size_t len, const void *buf)
-{
-	return ramtron_common(flash, offset, len, (void *)buf,
-		CMD_PAGE_PROGRAM);
-}
-
-static int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len)
-{
-	debug("SF: Erase of RAMTRON FRAMs is pointless\n");
-	return -1;
-}
-
-/*
- * nore: we are called here with idcode pointing to the first non-0x7f byte
- * already!
- */
-static struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi,
-		u8 *idcode)
-{
-	const struct ramtron_spi_fram_params *params;
-	struct ramtron_spi_fram *sn;
-	unsigned int i;
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
-	int ret;
-	u8 sr;
-#endif
-
-	/* NOTE: the bus has been claimed before this function is called! */
-	switch (idcode[0]) {
-	case 0xc2:
-		/* JEDEC conformant RAMTRON id */
-		for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
-			params = &ramtron_spi_fram_table[i];
-			if (idcode[1] == params->id1 &&
-			    idcode[2] == params->id2)
-				goto found;
-		}
-		break;
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
-	case 0xff:
-		/*
-		 * probably open MISO line, pulled up.
-		 * We COULD have a non JEDEC conformant FRAM here,
-		 * read the status register to verify
-		 */
-		ret = spi_flash_cmd(spi, CMD_READ_STATUS, &sr, 1);
-		if (ret)
-			return NULL;
-
-		/* Bits 5,4,0 are fixed 0 for all devices */
-		if ((sr & 0x31) != 0x00)
-			return NULL;
-		/* now find the device */
-		for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
-			params = &ramtron_spi_fram_table[i];
-			if (!strcmp(params->name,
-				    CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC))
-				goto found;
-		}
-		debug("SF: Unsupported non-JEDEC RAMTRON device "
-			CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC "\n");
-		break;
-#endif
-	default:
-		break;
-	}
-
-	/* arriving here means no method has found a device we can handle */
-	debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n",
-	      idcode[0], idcode[1], idcode[2]);
-	return NULL;
-
-found:
-	sn = malloc(sizeof(*sn));
-	if (!sn) {
-		debug("SF: Failed to allocate memory\n");
-		return NULL;
-	}
-
-	sn->params = params;
-
-	sn->flash.write = ramtron_write;
-	sn->flash.read = ramtron_read;
-	sn->flash.erase = ramtron_erase;
-	sn->flash.size = params->size;
-
-	return &sn->flash;
-}
-
-/*
- * The following table holds all device probe functions
- * (All flashes are removed and implemented a common probe at
- *  spi_flash_probe.c)
- *
- * shift:  number of continuation bytes before the ID
- * idcode: the expected IDCODE or 0xff for non JEDEC devices
- * probe:  the function to call
- *
- * Non JEDEC devices should be ordered in the table such that
- * the probe functions with best detection algorithms come first.
- *
- * Several matching entries are permitted, they will be tried
- * in sequence until a probe function returns non NULL.
- *
- * IDCODE_CONT_LEN may be redefined if a device needs to declare a
- * larger "shift" value.  IDCODE_PART_LEN generally shouldn't be
- * changed.  This is the max number of bytes probe functions may
- * examine when looking up part-specific identification info.
- *
- * Probe functions will be given the idcode buffer starting at their
- * manu id byte (the "idcode" in the table below).  In other words,
- * all of the continuation bytes will be skipped (the "shift" below).
- */
-#define IDCODE_CONT_LEN 0
-#define IDCODE_PART_LEN 5
-static const struct {
-	const u8 shift;
-	const u8 idcode;
-	struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-} flashes[] = {
-	/* Keep it sorted by define name */
-#ifdef CONFIG_SPI_FRAM_RAMTRON
-	{ 6, 0xc2, spi_fram_probe_ramtron, },
-# undef IDCODE_CONT_LEN
-# define IDCODE_CONT_LEN 6
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
-	{ 0, 0xff, spi_fram_probe_ramtron, },
-#endif
-};
-#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int spi_mode)
-{
-	struct spi_slave *spi;
-	struct spi_flash *flash = NULL;
-	int ret, i, shift;
-	u8 idcode[IDCODE_LEN], *idp;
-
-	spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
-	if (!spi) {
-		printf("SF: Failed to set up slave\n");
-		return NULL;
-	}
-
-	ret = spi_claim_bus(spi);
-	if (ret) {
-		debug("SF: Failed to claim SPI bus: %d\n", ret);
-		goto err_claim_bus;
-	}
-
-	/* Read the ID codes */
-	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
-	if (ret)
-		goto err_read_id;
-
-#ifdef DEBUG
-	printf("SF: Got idcodes\n");
-	print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
-	/* count the number of continuation bytes */
-	for (shift = 0, idp = idcode;
-	     shift < IDCODE_CONT_LEN && *idp == 0x7f;
-	     ++shift, ++idp)
-		continue;
-
-	/* search the table for matches in shift and id */
-	for (i = 0; i < ARRAY_SIZE(flashes); ++i)
-		if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
-			/* we have a match, call probe */
-			flash = flashes[i].probe(spi, idp);
-			if (flash)
-				break;
-		}
-
-	if (!flash) {
-		printf("SF: Unsupported manufacturer %02x\n", *idp);
-		goto err_manufacturer_probe;
-	}
-
-	printf("SF: Detected %s with total size ", flash->name);
-	print_size(flash->size, "");
-	puts("\n");
-
-	spi_release_bus(spi);
-
-	return flash;
-
-err_manufacturer_probe:
-err_read_id:
-	spi_release_bus(spi);
-err_claim_bus:
-	spi_free_slave(spi);
-	return NULL;
-}
-
-void spi_flash_free(struct spi_flash *flash)
-{
-	spi_free_slave(flash->spi);
-	free(flash);
-}
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index 30875b3660..c12e8c6fe7 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -51,6 +51,8 @@ const struct spi_flash_params spi_flash_params_table[] = {
 	{"S25FL016A",	   0x010214, 0x0,	64 * 1024,    32, RD_NORM,			  0},
 	{"S25FL032A",	   0x010215, 0x0,	64 * 1024,    64, RD_NORM,			  0},
 	{"S25FL064A",	   0x010216, 0x0,	64 * 1024,   128, RD_NORM,			  0},
+	{"S25FL116K",	   0x014015, 0x0,	64 * 1024,   128, RD_NORM,			  0},
+	{"S25FL164K",	   0x014017, 0x0140,	64 * 1024,   128, RD_NORM,			  0},
 	{"S25FL128P_256K", 0x012018, 0x0300,   256 * 1024,    64, RD_FULL,		     WR_QPP},
 	{"S25FL128P_64K",  0x012018, 0x0301,    64 * 1024,   256, RD_FULL,		     WR_QPP},
 	{"S25FL032P",	   0x010215, 0x4d00,    64 * 1024,    64, RD_FULL,		     WR_QPP},
@@ -98,6 +100,7 @@ const struct spi_flash_params spi_flash_params_table[] = {
 	{"SST25WF010",	   0xbf2502, 0x0,	64 * 1024,     2, RD_NORM,          SECT_4K | SST_WR},
 	{"SST25WF020",	   0xbf2503, 0x0,	64 * 1024,     4, RD_NORM,	    SECT_4K | SST_WR},
 	{"SST25WF040",	   0xbf2504, 0x0,	64 * 1024,     8, RD_NORM,	    SECT_4K | SST_WR},
+	{"SST25WF040B",	   0x621613, 0x0,	64 * 1024,     8, RD_NORM,	    SECT_4K | SST_WR},
 	{"SST25WF080",	   0xbf2505, 0x0,	64 * 1024,    16, RD_NORM,	    SECT_4K | SST_WR},
 #endif
 #ifdef CONFIG_SPI_FLASH_WINBOND		/* WINBOND */
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index ba20beff4f..d12f4201d6 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -14,7 +14,11 @@
 #include "fsl_qspi.h"
 
 #define RX_BUFFER_SIZE		0x80
+#ifdef CONFIG_MX6SX
+#define TX_BUFFER_SIZE		0x200
+#else
 #define TX_BUFFER_SIZE		0x40
+#endif
 
 #define OFFSET_BITS_MASK	0x00ffffff
 
@@ -28,20 +32,22 @@
 #define SEQID_CHIP_ERASE	5
 #define SEQID_PP		6
 #define SEQID_RDID		7
-
-/* Flash opcodes */
-#define OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
-#define OPCODE_RDSR		0x05	/* Read status register */
-#define OPCODE_WREN		0x06	/* Write enable */
-#define OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
-#define OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */
-#define OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
-#define OPCODE_RDID		0x9f	/* Read JEDEC ID */
-
-/* 4-byte address opcodes - used on Spansion and some Macronix flashes */
-#define OPCODE_FAST_READ_4B	0x0c    /* Read data bytes (high frequency) */
-#define OPCODE_PP_4B		0x12    /* Page program (up to 256 bytes) */
-#define OPCODE_SE_4B		0xdc    /* Sector erase (usually 64KiB) */
+#define SEQID_BE_4K		8
+
+/* QSPI CMD */
+#define QSPI_CMD_PP		0x02	/* Page program (up to 256 bytes) */
+#define QSPI_CMD_RDSR		0x05	/* Read status register */
+#define QSPI_CMD_WREN		0x06	/* Write enable */
+#define QSPI_CMD_FAST_READ	0x0b	/* Read data bytes (high frequency) */
+#define QSPI_CMD_BE_4K		0x20    /* 4K erase */
+#define QSPI_CMD_CHIP_ERASE	0xc7	/* Erase whole flash chip */
+#define QSPI_CMD_SE		0xd8	/* Sector erase (usually 64KiB) */
+#define QSPI_CMD_RDID		0x9f	/* Read JEDEC ID */
+
+/* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */
+#define QSPI_CMD_FAST_READ_4B	0x0c    /* Read data bytes (high frequency) */
+#define QSPI_CMD_PP_4B		0x12    /* Page program (up to 256 bytes) */
+#define QSPI_CMD_SE_4B		0xdc    /* Sector erase (usually 64KiB) */
 
 #ifdef CONFIG_SYS_FSL_QSPI_LE
 #define qspi_read32		in_le32
@@ -53,10 +59,16 @@
 
 static unsigned long spi_bases[] = {
 	QSPI0_BASE_ADDR,
+#ifdef CONFIG_MX6SX
+	QSPI1_BASE_ADDR,
+#endif
 };
 
 static unsigned long amba_bases[] = {
 	QSPI0_AMBA_BASE,
+#ifdef CONFIG_MX6SX
+	QSPI1_AMBA_BASE,
+#endif
 };
 
 struct fsl_qspi {
@@ -94,7 +106,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
 
 	/* Write Enable */
 	lut_base = SEQID_WREN * 4;
-	qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_WREN) |
+	qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_WREN) |
 		PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
 	qspi_write32(&regs->lut[lut_base + 1], 0);
 	qspi_write32(&regs->lut[lut_base + 2], 0);
@@ -103,13 +115,15 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
 	/* Fast Read */
 	lut_base = SEQID_FAST_READ * 4;
 	if (FSL_QSPI_FLASH_SIZE  <= SZ_16M)
-		qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_FAST_READ) |
+		qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) |
 			PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
 			PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
 	else
-		qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_FAST_READ_4B) |
-			PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
-			PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+		qspi_write32(&regs->lut[lut_base],
+			     OPRND0(QSPI_CMD_FAST_READ_4B) |
+			     PAD0(LUT_PAD1) | INSTR0(LUT_CMD) |
+			     OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) |
+			     INSTR1(LUT_ADDR));
 	qspi_write32(&regs->lut[lut_base + 1], OPRND0(8) | PAD0(LUT_PAD1) |
 		INSTR0(LUT_DUMMY) | OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) |
 		INSTR1(LUT_READ));
@@ -118,7 +132,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
 
 	/* Read Status */
 	lut_base = SEQID_RDSR * 4;
-	qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_RDSR) |
+	qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_RDSR) |
 		PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
 		PAD1(LUT_PAD1) | INSTR1(LUT_READ));
 	qspi_write32(&regs->lut[lut_base + 1], 0);
@@ -128,11 +142,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
 	/* Erase a sector */
 	lut_base = SEQID_SE * 4;
 	if (FSL_QSPI_FLASH_SIZE  <= SZ_16M)
-		qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_SE) |
+		qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_SE) |
 			PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
 			PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
 	else
-		qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_SE_4B) |
+		qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_SE_4B) |
 			PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
 			PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
 	qspi_write32(&regs->lut[lut_base + 1], 0);
@@ -141,7 +155,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
 
 	/* Erase the whole chip */
 	lut_base = SEQID_CHIP_ERASE * 4;
-	qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_CHIP_ERASE) |
+	qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_CHIP_ERASE) |
 		PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
 	qspi_write32(&regs->lut[lut_base + 1], 0);
 	qspi_write32(&regs->lut[lut_base + 2], 0);
@@ -150,27 +164,42 @@ static void qspi_set_lut(struct fsl_qspi *qspi)
 	/* Page Program */
 	lut_base = SEQID_PP * 4;
 	if (FSL_QSPI_FLASH_SIZE  <= SZ_16M)
-		qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_PP) |
+		qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_PP) |
 			PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
 			PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
 	else
-		qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_PP_4B) |
+		qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_PP_4B) |
 			PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
 			PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+#ifdef CONFIG_MX6SX
+	/*
+	 * To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly.
+	 * So, Use IDATSZ in IPCR to determine the size and here set 0.
+	 */
+	qspi_write32(&regs->lut[lut_base + 1], OPRND0(0) |
+		     PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
+#else
 	qspi_write32(&regs->lut[lut_base + 1], OPRND0(TX_BUFFER_SIZE) |
 		PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
+#endif
 	qspi_write32(&regs->lut[lut_base + 2], 0);
 	qspi_write32(&regs->lut[lut_base + 3], 0);
 
 	/* READ ID */
 	lut_base = SEQID_RDID * 4;
-	qspi_write32(&regs->lut[lut_base], OPRND0(OPCODE_RDID) |
+	qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_RDID) |
 		PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(8) |
 		PAD1(LUT_PAD1) | INSTR1(LUT_READ));
 	qspi_write32(&regs->lut[lut_base + 1], 0);
 	qspi_write32(&regs->lut[lut_base + 2], 0);
 	qspi_write32(&regs->lut[lut_base + 3], 0);
 
+	/* SUB SECTOR 4K ERASE */
+	lut_base = SEQID_BE_4K * 4;
+	qspi_write32(&regs->lut[lut_base], OPRND0(QSPI_CMD_BE_4K) |
+		     PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+		     PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+
 	/* Lock the LUT */
 	qspi_write32(&regs->lutkey, LUT_KEY_VALUE);
 	qspi_write32(&regs->lckcr, QSPI_LCKCR_LOCK);
@@ -192,12 +221,22 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	if (bus >= ARRAY_SIZE(spi_bases))
 		return NULL;
 
+	if (cs >= FSL_QSPI_FLASH_NUM)
+		return NULL;
+
 	qspi = spi_alloc_slave(struct fsl_qspi, bus, cs);
 	if (!qspi)
 		return NULL;
 
 	qspi->reg_base = spi_bases[bus];
-	qspi->amba_base = amba_bases[bus];
+	/*
+	 * According cs, use different amba_base to choose the
+	 * corresponding flash devices.
+	 *
+	 * If not, only one flash device is used even if passing
+	 * different cs using `sf probe`
+	 */
+	qspi->amba_base = amba_bases[bus] + cs * FSL_QSPI_FLASH_SIZE;
 
 	qspi->slave.max_write_size = TX_BUFFER_SIZE;
 
@@ -210,10 +249,20 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	qspi_write32(&regs->mcr, QSPI_MCR_RESERVED_MASK);
 
 	total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM;
-	qspi_write32(&regs->sfa1ad, FSL_QSPI_FLASH_SIZE | qspi->amba_base);
-	qspi_write32(&regs->sfa2ad, FSL_QSPI_FLASH_SIZE | qspi->amba_base);
-	qspi_write32(&regs->sfb1ad, total_size | qspi->amba_base);
-	qspi_write32(&regs->sfb2ad, total_size | qspi->amba_base);
+	/*
+	 * Any read access to non-implemented addresses will provide
+	 * undefined results.
+	 *
+	 * In case single die flash devices, TOP_ADDR_MEMA2 and
+	 * TOP_ADDR_MEMB2 should be initialized/programmed to
+	 * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
+	 * setting the size of these devices to 0.  This would ensure
+	 * that the complete memory map is assigned to only one flash device.
+	 */
+	qspi_write32(&regs->sfa1ad, FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
+	qspi_write32(&regs->sfa2ad, FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
+	qspi_write32(&regs->sfb1ad, total_size | amba_bases[bus]);
+	qspi_write32(&regs->sfb2ad, total_size | amba_bases[bus]);
 
 	qspi_set_lut(qspi);
 
@@ -409,7 +458,7 @@ static void qspi_op_rdsr(struct fsl_qspi *qspi, u32 *rxbuf)
 	qspi_write32(&regs->mcr, mcr_reg);
 }
 
-static void qspi_op_se(struct fsl_qspi *qspi)
+static void qspi_op_erase(struct fsl_qspi *qspi)
 {
 	struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base;
 	u32 mcr_reg;
@@ -428,8 +477,13 @@ static void qspi_op_se(struct fsl_qspi *qspi)
 	while (qspi_read32(&regs->sr) & QSPI_SR_BUSY_MASK)
 		;
 
-	qspi_write32(&regs->ipcr,
-		(SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0);
+	if (qspi->cur_seqid == QSPI_CMD_SE) {
+		qspi_write32(&regs->ipcr,
+			     (SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0);
+	} else if (qspi->cur_seqid == QSPI_CMD_BE_4K) {
+		qspi_write32(&regs->ipcr,
+			     (SEQID_BE_4K << QSPI_IPCR_SEQID_SHIFT) | 0);
+	}
 	while (qspi_read32(&regs->sr) & QSPI_SR_BUSY_MASK)
 		;
 
@@ -454,22 +508,23 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 			return 0;
 		}
 
-		if (qspi->cur_seqid == OPCODE_FAST_READ) {
+		if (qspi->cur_seqid == QSPI_CMD_FAST_READ) {
 			qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
-		} else if (qspi->cur_seqid == OPCODE_SE) {
+		} else if ((qspi->cur_seqid == QSPI_CMD_SE) ||
+			   (qspi->cur_seqid == QSPI_CMD_BE_4K)) {
 			qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
-			qspi_op_se(qspi);
-		} else if (qspi->cur_seqid == OPCODE_PP) {
+			qspi_op_erase(qspi);
+		} else if (qspi->cur_seqid == QSPI_CMD_PP) {
 			pp_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
 		}
 	}
 
 	if (din) {
-		if (qspi->cur_seqid == OPCODE_FAST_READ)
+		if (qspi->cur_seqid == QSPI_CMD_FAST_READ)
 			qspi_op_read(qspi, din, bytes);
-		else if (qspi->cur_seqid == OPCODE_RDID)
+		else if (qspi->cur_seqid == QSPI_CMD_RDID)
 			qspi_op_rdid(qspi, din, bytes);
-		else if (qspi->cur_seqid == OPCODE_RDSR)
+		else if (qspi->cur_seqid == QSPI_CMD_RDSR)
 			qspi_op_rdsr(qspi, din);
 	}
 
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index e3e7f7686b..e6c41306a3 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -187,9 +187,20 @@
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
+
+#if defined CONFIG_SYS_BOOT_SPINOR
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET               (768 * 1024)
+#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
+#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
+#else
+#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
 #define CONFIG_ENV_IS_IN_MMC
+#endif
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 61a7a7a07e..469d250973 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -235,6 +235,18 @@
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SYS_FSL_QSPI_LE
+#define FSL_QSPI_FLASH_SIZE		SZ_16M
+#define FSL_QSPI_FLASH_NUM		2
+#endif
+
 #define CONFIG_ENV_OFFSET		(6 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC