summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-08-17 09:36:01 +0000
committerwdenk <wdenk>2002-08-17 09:36:01 +0000
commitaffae2bff825c1a8d2cfeaf7b270188d251d39d2 (patch)
treee025ca5a84cdcd70cff986e09f89e1aaa360499c
parentcf356ef708390102d493c53d18fd19a5963c6aa9 (diff)
downloadblackbird-obmc-uboot-affae2bff825c1a8d2cfeaf7b270188d251d39d2.tar.gz
blackbird-obmc-uboot-affae2bff825c1a8d2cfeaf7b270188d251d39d2.zip
Initial revision
-rw-r--r--board/c2mon/flash.c570
-rw-r--r--board/cogent/dipsw.c50
-rw-r--r--board/cogent/flash.c648
-rw-r--r--board/cu824/flash.c486
-rw-r--r--board/eltec/mhpc/flash.c453
-rw-r--r--board/ep8260/flash.c396
-rw-r--r--board/ep8260/mii_phy.c108
-rw-r--r--board/esd/adciop/flash.c113
-rw-r--r--board/esd/common/flash.c646
-rw-r--r--board/esd/cpci405/flash.c160
-rw-r--r--board/esd/dasa_sim/cmd_dasa_sim.c236
-rw-r--r--board/esd/dasa_sim/flash.c77
-rw-r--r--board/esd/du405/flash.c123
-rw-r--r--board/esd/ocrtc/flash.c156
-rw-r--r--board/esd/pci405/flash.c101
-rw-r--r--board/esteem192e/flash.c1096
-rw-r--r--board/etx094/flash.c744
-rw-r--r--board/evb64260/i2c.c315
-rw-r--r--board/evb64260/intel_flash.c277
-rw-r--r--board/fads/flash.c624
-rw-r--r--board/fads/lamp.c42
-rw-r--r--board/genietv/flash.c470
-rw-r--r--board/gth/ee_access.c335
-rw-r--r--board/gth/flash.c649
-rw-r--r--board/hermes/flash.c460
-rw-r--r--board/hymod/eeprom.c597
-rw-r--r--board/hymod/flash.c745
-rw-r--r--board/icu862/flash.c617
-rw-r--r--board/ip860/flash.c456
-rw-r--r--board/ivm/flash.c598
-rw-r--r--board/lantec/flash.c625
-rw-r--r--board/mbx8xx/flash.c408
-rw-r--r--board/mbx8xx/vpd.c196
-rw-r--r--board/mousse/flash.h78
-rw-r--r--board/mpc8260ads/flash.c508
-rw-r--r--board/mpl/common/flash.c860
-rw-r--r--board/mpl/common/isa.c469
-rw-r--r--board/mpl/common/kbd.c655
-rw-r--r--board/mpl/common/usb_uhci.c1152
-rw-r--r--board/musenki/flash.c513
-rw-r--r--board/nx823/flash.c465
-rw-r--r--board/pcippc2/flash.c573
-rw-r--r--board/pcippc2/pcippc2.h49
-rw-r--r--board/pcippc2/pcippc2_fpga.c87
-rw-r--r--board/rpxsuper/flash.c434
-rw-r--r--board/rpxsuper/mii_phy.c108
-rw-r--r--board/rsdproto/flash.c402
-rw-r--r--board/siemens/CCM/flash.c553
-rw-r--r--board/siemens/IAD210/atm.c653
-rw-r--r--board/siemens/IAD210/flash.c502
-rw-r--r--board/siemens/SCM/flash.c488
-rw-r--r--board/siemens/pcu_e/flash.c700
-rw-r--r--board/sixnet/flash.c746
-rw-r--r--board/spd8xx/flash.c57
-rw-r--r--board/tqm8260/flash.c488
-rw-r--r--board/w7o/fsboot.c90
-rw-r--r--board/w7o/watchdog.c48
-rw-r--r--board/westel/amx860/flash.c637
-rw-r--r--common/docecc.c519
-rw-r--r--common/flash.c219
-rw-r--r--common/lists.c734
-rw-r--r--common/miiphybb.c231
-rw-r--r--common/s_record.c195
-rw-r--r--common/usb.c1066
-rw-r--r--common/usb_kbd.c734
-rw-r--r--common/usb_storage.c895
-rw-r--r--cpu/74xx_7xx/traps.c234
-rw-r--r--cpu/mpc824x/drivers/epic/epic1.c513
-rw-r--r--cpu/mpc824x/traps.c205
-rw-r--r--cpu/mpc8260/ether_fcc.c347
-rw-r--r--cpu/mpc8260/traps.c246
-rw-r--r--cpu/mpc8xx/traps.c245
-rw-r--r--cpu/mpc8xx/upatch.c102
-rw-r--r--cpu/ppc4xx/miiphy.c182
-rw-r--r--cpu/ppc4xx/traps.c291
-rw-r--r--disk/part.c227
-rw-r--r--drivers/pci_indirect.c74
-rw-r--r--examples/eepro100_eeprom.c210
-rw-r--r--include/pcmcia.h301
-rw-r--r--include/syscall.h37
-rw-r--r--lib_generic/crc32.c199
-rw-r--r--lib_ppc/bat_rw.c133
-rw-r--r--lib_ppc/cache.c47
-rw-r--r--net/rarp.c106
-rw-r--r--rtc/ds1306.c274
-rw-r--r--rtc/m41t11.c202
-rw-r--r--rtc/m48t35ax.c166
-rw-r--r--rtc/mc146818.c172
-rw-r--r--rtc/mpc8xx.c75
89 files changed, 34073 insertions, 0 deletions
diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c
new file mode 100644
index 0000000000..181f82af2f
--- /dev/null
+++ b/board/c2mon/flash.c
@@ -0,0 +1,570 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#ifndef CFG_ENV_ADDR
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#endif
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+ memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+ &flash_info[1]);
+#endif
+ } else {
+ memctl->memc_br1 = 0; /* invalidate bank */
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+
+ value = addr[0];
+
+ switch (value) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *)info->start[0];
+
+ *addr = 0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x00300030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+ while ((addr[0] & 0x00800080) != 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+ addr[0] = 0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/cogent/dipsw.c b/board/cogent/dipsw.c
new file mode 100644
index 0000000000..d2027c9758
--- /dev/null
+++ b/board/cogent/dipsw.c
@@ -0,0 +1,50 @@
+#include <common.h>
+#include <board/cogent/dipsw.h>
+
+unsigned char
+dipsw_raw(void)
+{
+ return cma_mb_reg_read(&((cma_mb_dipsw *)CMA_MB_DIPSW_BASE)->dip_val);
+}
+
+unsigned char
+dipsw_cooked(void)
+{
+ unsigned char val1, val2, mask1, mask2;
+
+ val1 = dipsw_raw();
+
+ /*
+ * we want to mirror the bits because the low bit is switch 1 and high
+ * bit is switch 8 and also invert them because 1=off and 0=on, according
+ * to manual.
+ *
+ * this makes the value more intuitive i.e.
+ * - left most, or high, or top, bit is left most switch (1);
+ * - right most, or low, or bottom, bit is right most switch (8)
+ * - a set bit means "on" and a clear bit means "off"
+ */
+
+ val2 = 0;
+ for (mask1 = 1 << 7, mask2 = 1; mask1 > 0; mask1 >>= 1, mask2 <<= 1)
+ if ((val1 & mask1) == 0)
+ val2 |= mask2;
+
+ return (val2);
+}
+
+void
+dipsw_init(void)
+{
+ unsigned char val, mask;
+
+ val = dipsw_cooked();
+
+ printf("|");
+ for (mask = 1 << 7; mask > 0; mask >>= 1)
+ if (val & mask)
+ printf("on |");
+ else
+ printf("off|");
+ printf("\n");
+}
diff --git a/board/cogent/flash.c b/board/cogent/flash.c
new file mode 100644
index 0000000000..86da80edb8
--- /dev/null
+++ b/board/cogent/flash.c
@@ -0,0 +1,648 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <board/cogent/flash.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+
+#if defined(CONFIG_CMA302)
+
+/*
+ * probe for the existence of flash at address "addr"
+ * 0 = yes, 1 = bad Manufacturer's Id, 2 = bad Device Id
+ */
+static int
+c302f_probe_word(c302f_addr_t addr)
+{
+ /* reset the flash */
+ *addr = C302F_BNK_CMD_RST;
+
+ /* check the manufacturer id */
+ *addr = C302F_BNK_CMD_RD_ID;
+ if (*C302F_BNK_ADDR_MAN(addr) != C302F_BNK_RD_ID_MAN)
+ return 1;
+
+ /* check the device id */
+ *addr = C302F_BNK_CMD_RD_ID;
+ if (*C302F_BNK_ADDR_DEV(addr) != C302F_BNK_RD_ID_DEV)
+ return 2;
+
+#ifdef FLASH_DEBUG
+ {
+ int i;
+
+ printf("\nMaster Lock Config = 0x%08lx\n",
+ *C302F_BNK_ADDR_CFGM(addr));
+ for (i = 0; i < C302F_BNK_NBLOCKS; i++)
+ printf("Block %2d Lock Config = 0x%08lx\n",
+ i, *C302F_BNK_ADDR_CFG(i, addr));
+ }
+#endif
+
+ /* reset the flash again */
+ *addr = C302F_BNK_CMD_RST;
+
+ return 0;
+}
+
+/*
+ * probe for Cogent CMA302 flash module at address "base" and store
+ * info for any found into flash_info entry "fip". Must find at least
+ * one bank.
+ */
+static void
+c302f_probe(flash_info_t *fip, c302f_addr_t base)
+{
+ c302f_addr_t addr, eaddr;
+ int nbanks;
+
+ fip->size = 0L;
+ fip->sector_count = 0;
+
+ addr = base;
+ eaddr = C302F_BNK_ADDR_BASE(addr, C302F_MAX_BANKS);
+ nbanks = 0;
+
+ while (addr < eaddr) {
+ c302f_addr_t addrw, eaddrw, addrb;
+ int i, osc, nsc;
+
+ addrw = addr;
+ eaddrw = C302F_BNK_ADDR_NEXT_WORD(addrw);
+
+ while (addrw < eaddrw)
+ if (c302f_probe_word(addrw++) != 0)
+ goto out;
+
+ /* bank exists - append info for this bank to *fip */
+ fip->flash_id = FLASH_MAN_INTEL|FLASH_28F008S5;
+ fip->size += C302F_BNK_SIZE;
+ osc = fip->sector_count;
+ fip->sector_count += C302F_BNK_NBLOCKS;
+ if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT)
+ panic("Too many sectors in flash at address 0x%08lx\n",
+ (unsigned long)base);
+
+ addrb = addr;
+ for (i = osc; i < nsc; i++) {
+ fip->start[i] = (ulong)addrb;
+ fip->protect[i] = 0;
+ addrb = C302F_BNK_ADDR_NEXT_BLK(addrb);
+ }
+
+ addr = C302F_BNK_ADDR_NEXT_BNK(addr);
+ nbanks++;
+ }
+
+out:
+ if (nbanks == 0)
+ panic("ERROR: no flash found at address 0x%08lx\n",
+ (unsigned long)base);
+}
+
+static void
+c302f_reset(flash_info_t *info, int sect)
+{
+ c302f_addr_t addrw, eaddrw;
+
+ addrw = (c302f_addr_t)info->start[sect];
+ eaddrw = C302F_BNK_ADDR_NEXT_WORD(addrw);
+
+ while (addrw < eaddrw) {
+#ifdef FLASH_DEBUG
+ printf(" writing reset cmd to addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ *addrw = C302F_BNK_CMD_RST;
+ addrw++;
+ }
+}
+
+static void
+c302f_erase_init(flash_info_t *info, int sect)
+{
+ c302f_addr_t addrw, saddrw, eaddrw;
+ int flag;
+
+#ifdef FLASH_DEBUG
+ printf("0x%08lx C302F_BNK_CMD_PROG\n", C302F_BNK_CMD_PROG);
+ printf("0x%08lx C302F_BNK_CMD_ERASE1\n", C302F_BNK_CMD_ERASE1);
+ printf("0x%08lx C302F_BNK_CMD_ERASE2\n", C302F_BNK_CMD_ERASE2);
+ printf("0x%08lx C302F_BNK_CMD_CLR_STAT\n", C302F_BNK_CMD_CLR_STAT);
+ printf("0x%08lx C302F_BNK_CMD_RST\n", C302F_BNK_CMD_RST);
+ printf("0x%08lx C302F_BNK_STAT_RDY\n", C302F_BNK_STAT_RDY);
+ printf("0x%08lx C302F_BNK_STAT_ERR\n", C302F_BNK_STAT_ERR);
+#endif
+
+ saddrw = (c302f_addr_t)info->start[sect];
+ eaddrw = C302F_BNK_ADDR_NEXT_WORD(saddrw);
+
+#ifdef FLASH_DEBUG
+ printf("erasing sector %d, start addr = 0x%08lx "
+ "(bank next word addr = 0x%08lx)\n", sect,
+ (unsigned long)saddrw, (unsigned long)eaddrw);
+#endif
+
+ /* Disable intrs which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (addrw = saddrw; addrw < eaddrw; addrw++) {
+#ifdef FLASH_DEBUG
+ printf(" writing erase cmd to addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ *addrw = C302F_BNK_CMD_ERASE1;
+ *addrw = C302F_BNK_CMD_ERASE2;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+}
+
+static int
+c302f_erase_poll(flash_info_t *info, int sect)
+{
+ c302f_addr_t addrw, saddrw, eaddrw;
+ int sectdone, haderr;
+
+ saddrw = (c302f_addr_t)info->start[sect];
+ eaddrw = C302F_BNK_ADDR_NEXT_WORD(saddrw);
+
+ sectdone = 1;
+ haderr = 0;
+
+ for (addrw = saddrw; addrw < eaddrw; addrw++) {
+ c302f_word_t stat = *addrw;
+
+#ifdef FLASH_DEBUG
+ printf(" checking status at addr "
+ "0x%08lx [0x%08lx]\n",
+ (unsigned long)addrw, stat);
+#endif
+ if ((stat & C302F_BNK_STAT_RDY) != C302F_BNK_STAT_RDY)
+ sectdone = 0;
+ else if ((stat & C302F_BNK_STAT_ERR) != 0) {
+ printf(" failed on sector %d "
+ "(stat = 0x%08lx) at "
+ "address 0x%08lx\n",
+ sect, stat,
+ (unsigned long)addrw);
+ *addrw = C302F_BNK_CMD_CLR_STAT;
+ haderr = 1;
+ }
+ }
+
+ if (haderr)
+ return (-1);
+ else
+ return (sectdone);
+}
+
+static int
+c302f_write_word(c302f_addr_t addr, c302f_word_t value)
+{
+ c302f_word_t stat;
+ ulong start;
+ int flag, retval;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = C302F_BNK_CMD_PROG;
+
+ *addr = value;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ retval = 0;
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ do {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ retval = 1;
+ goto done;
+ }
+ stat = *addr;
+ } while ((stat & C302F_BNK_STAT_RDY) != C302F_BNK_STAT_RDY);
+
+ if ((stat & C302F_BNK_STAT_ERR) != 0) {
+ printf("flash program failed (stat = 0x%08lx) "
+ "at address 0x%08lx\n", (ulong)stat, (ulong)addr);
+ *addr = C302F_BNK_CMD_CLR_STAT;
+ retval = 3;
+ }
+
+done:
+ /* reset to read mode */
+ *addr = C302F_BNK_CMD_RST;
+
+ return (retval);
+}
+
+#endif /* CONFIG_CMA302 */
+
+unsigned long
+flash_init(void)
+{
+ unsigned long total;
+ int i;
+ flash_info_t *fip;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ fip = &flash_info[0];
+ total = 0L;
+
+#if defined(CONFIG_CMA302)
+ c302f_probe(fip, (c302f_addr_t)CFG_FLASH_BASE);
+ total += fip->size;
+ fip++;
+#endif
+
+#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
+ /* not yet ...
+ cmbf_probe(fip, (cmbf_addr_t)CMA_MB_FLASH_BASE);
+ total += fip->size;
+ fip++;
+ */
+#endif
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+ return total;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F008S5: printf ("28F008S5\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 4) == 0)
+ printf ("\n ");
+ printf (" %2d - %08lX%s", i,
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+int
+flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ int prot, sect, haderr;
+ ulong start, now, last;
+ void (*erase_init)(flash_info_t *, int);
+ int (*erase_poll)(flash_info_t *, int);
+ void (*reset)(flash_info_t *, int);
+ int rcode = 0;
+
+#ifdef FLASH_DEBUG
+ printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
+ " Bank # %d: ", s_last - s_first + 1, s_first, s_last,
+ (info - flash_info) + 1);
+ flash_print_info(info);
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ switch (info->flash_id) {
+
+#if defined(CONFIG_CMA302)
+ case FLASH_MAN_INTEL|FLASH_28F008S5:
+ erase_init = c302f_erase_init;
+ erase_poll = c302f_erase_poll;
+ reset = c302f_reset;
+ break;
+#endif
+
+#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
+ case FLASH_MAN_INTEL|FLASH_28F800_B:
+ case FLASH_MAN_AMD|FLASH_AM29F800B:
+ /* not yet ...
+ erase_init = cmbf_erase_init;
+ erase_poll = cmbf_erase_poll;
+ reset = cmbf_reset;
+ break;
+ */
+#endif
+
+ default:
+ printf ("Flash type %08lx not supported - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sector%s will not be erased!\n",
+ prot, (prot > 1 ? "s" : ""));
+ }
+
+ start = get_timer (0);
+ last = 0;
+ haderr = 0;
+
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ ulong estart;
+ int sectdone;
+
+ (*erase_init)(info, sect);
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ estart = get_timer(start);
+
+ do {
+ now = get_timer(start);
+
+ if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout (sect %d)\n", sect);
+ haderr = 1;
+ break;
+ }
+
+#ifndef FLASH_DEBUG
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+#endif
+
+ sectdone = (*erase_poll)(info, sect);
+
+ if (sectdone < 0) {
+ haderr = 1;
+ break;
+ }
+
+ } while (!sectdone);
+
+ if (haderr)
+ break;
+ }
+ }
+
+ if (haderr > 0) {
+ printf (" failed\n");
+ rcode = 1;
+ }
+ else
+ printf (" done\n");
+
+ /* reset to read mode */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ (*reset)(info, sect);
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 3 - write error
+ */
+
+int
+write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+ ulong start, now, last;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ start = get_timer (0);
+ last = 0;
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+
+ /* show that we're waiting */
+ now = get_timer(start);
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 3 - write error
+ */
+static int
+write_word(flash_info_t *info, ulong dest, ulong data)
+{
+ int retval;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*(ulong *)dest & data) != data) {
+ return (2);
+ }
+
+ switch (info->flash_id) {
+
+#if defined(CONFIG_CMA302)
+ case FLASH_MAN_INTEL|FLASH_28F008S5:
+ retval = c302f_write_word((c302f_addr_t)dest, (c302f_word_t)data);
+ break;
+#endif
+
+#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
+ case FLASH_MAN_INTEL|FLASH_28F800_B:
+ case FLASH_MAN_AMD|FLASH_AM29F800B:
+ /* not yet ...
+ retval = cmbf_write_word((cmbf_addr_t)dest, (cmbf_word_t)data);
+ */
+ retval = 3;
+ break;
+#endif
+
+ default:
+ printf ("Flash type %08lx not supported - aborted\n",
+ info->flash_id);
+ retval = 3;
+ break;
+ }
+
+ return (retval);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/cu824/flash.c b/board/cu824/flash.c
new file mode 100644
index 0000000000..0cec41ebdb
--- /dev/null
+++ b/board/cu824/flash.c
@@ -0,0 +1,486 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+#define FLASH_BANK_SIZE 0x800000
+#define MAIN_SECT_SIZE 0x40000
+#define PARAM_SECT_SIZE 0x8000
+
+#define BOARD_CTRL_REG 0xFE800013
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static int write_data (flash_info_t *info, ulong dest, ulong *data);
+static void write_via_fpu(vu_long *addr, ulong *data);
+static __inline__ unsigned long get_msr(void);
+static __inline__ void set_msr(unsigned long msr);
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_FLASH
+
+/*---------------------------------------------------------------------*/
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ int i, j;
+ ulong size = 0;
+ volatile unsigned char *bcr = (volatile unsigned char *)(BOARD_CTRL_REG);
+
+ DEBUGF("Write protect was: 0x%02X\n", *bcr);
+ *bcr &= 0x1; /* FWPT must be 0 */
+ *bcr |= 0x6; /* FWP0 = FWP1 = 1 */
+ DEBUGF("Write protect is: 0x%02X\n", *bcr);
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+
+ addr[0] = 0x00900090;
+
+ DEBUGF ("Flash bank # %d:\n"
+ "\tManuf. ID @ 0x%08lX: 0x%08lX\n"
+ "\tDevice ID @ 0x%08lX: 0x%08lX\n",
+ i,
+ (ulong)(&addr[0]), addr[0],
+ (ulong)(&addr[2]), addr[2]);
+
+ if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
+ (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3B))
+ {
+ flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) |
+ (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
+ } else {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ addr[0] = 0xFFFFFFFF;
+ goto Done;
+ }
+
+ DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+
+ addr[0] = 0xFFFFFFFF;
+
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ if (j <= 7) {
+ flash_info[i].start[j] = CFG_FLASH_BASE +
+ i * FLASH_BANK_SIZE +
+ j * PARAM_SECT_SIZE;
+ } else {
+ flash_info[i].start[j] = CFG_FLASH_BASE +
+ i * FLASH_BANK_SIZE +
+ (j - 7)*MAIN_SECT_SIZE;
+ }
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[1]);
+#else
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#endif
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[1]);
+#else
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+#endif
+
+Done:
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ switch ((i = info->flash_id & FLASH_VENDMASK)) {
+ case (FLASH_MAN_INTEL & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor 0x%04x ", i);
+ break;
+ }
+
+ switch ((i = info->flash_id & FLASH_TYPEMASK)) {
+ case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
+ printf ("28F160F3B (16Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type 0x%04x\n", i);
+ goto Done;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+Done:
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ DEBUGF ("Erase flash bank %d sect %d ... %d\n",
+ info - &flash_info[0], s_first, s_last);
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (FLASH_MAN_INTEL & FLASH_VENDMASK)) {
+ printf ("Can erase only Intel flash types - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+
+ DEBUGF ("Erase sect %d @ 0x%08lX\n",
+ sect, (ulong)addr);
+
+ /* Disable interrupts which might cause a timeout
+ * here.
+ */
+ flag = disable_interrupts();
+
+ addr[0] = 0x00500050; /* clear status register */
+ addr[0] = 0x00200020; /* erase setup */
+ addr[0] = 0x00D000D0; /* erase confirm */
+
+ addr[1] = 0x00500050; /* clear status register */
+ addr[1] = 0x00200020; /* erase setup */
+ addr[1] = 0x00D000D0; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((addr[0] & 0x00800080) != 0x00800080) ||
+ ((addr[1] & 0x00800080) != 0x00800080) ) {
+ if ((now=get_timer(start)) >
+ CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ addr[0] = 0x00B000B0; /* suspend erase */
+ addr[0] = 0x00FF00FF; /* to read mode */
+ return 1;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ addr[0] = 0x00FF00FF;
+ }
+ }
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define FLASH_WIDTH 8 /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong wp, cp, msr;
+ int l, rc, i;
+ ulong data[2];
+ ulong *datah = &data[0];
+ ulong *datal = &data[1];
+
+ DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
+ addr, (ulong)src, cnt);
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ msr = get_msr();
+ set_msr(msr | MSR_FP);
+
+ wp = (addr & ~(FLASH_WIDTH-1)); /* get lower aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ *datah = *datal = 0;
+
+ for (i = 0, cp = wp; i < l; i++, cp++) {
+ if (i >= 4) {
+ *datah = (*datah << 8) |
+ ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | (*(uchar *)cp);
+ }
+ for (; i < FLASH_WIDTH && cnt > 0; ++i) {
+ char tmp;
+
+ tmp = *src;
+
+ src++;
+
+ if (i >= 4) {
+ *datah = (*datah << 8) |
+ ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | tmp;
+
+ --cnt; ++cp;
+ }
+
+ for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
+ if (i >= 4) {
+ *datah = (*datah << 8) |
+ ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datah << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_data(info, wp, data)) != 0) {
+ set_msr(msr);
+ return (rc);
+ }
+
+ wp += FLASH_WIDTH;
+ }
+
+ /*
+ * handle FLASH_WIDTH aligned part
+ */
+ while (cnt >= FLASH_WIDTH) {
+ *datah = *(ulong *)src;
+ *datal = *(ulong *)(src + 4);
+ if ((rc = write_data(info, wp, data)) != 0) {
+ set_msr(msr);
+ return (rc);
+ }
+ wp += FLASH_WIDTH;
+ cnt -= FLASH_WIDTH;
+ src += FLASH_WIDTH;
+ }
+
+ if (cnt == 0) {
+ set_msr(msr);
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ *datah = *datal = 0;
+ for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
+ char tmp;
+
+ tmp = *src;
+
+ src++;
+
+ if (i >= 4) {
+ *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | tmp;
+
+ --cnt;
+ }
+
+ for (; i < FLASH_WIDTH; ++i, ++cp) {
+ if (i >= 4) {
+ *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | (*(uchar *)cp);
+ }
+
+ rc = write_data(info, wp, data);
+ set_msr(msr);
+
+ return (rc);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, ulong *data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if (((addr[0] & data[0]) != data[0]) ||
+ ((addr[1] & data[1]) != data[1]) ) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0] = 0x00400040; /* write setup */
+ write_via_fpu(addr, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ while (((addr[0] & 0x00800080) != 0x00800080) ||
+ ((addr[1] & 0x00800080) != 0x00800080) ) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ addr[0] = 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ addr[0] = 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void write_via_fpu(vu_long *addr, ulong *data)
+{
+ __asm__ __volatile__ ("lfd 1, 0(%0)" : : "r" (data));
+ __asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr));
+}
+/*-----------------------------------------------------------------------
+ */
+static __inline__ unsigned long get_msr(void)
+{
+ unsigned long msr;
+
+ __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+ return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+ __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c
new file mode 100644
index 0000000000..58cfd7047f
--- /dev/null
+++ b/board/eltec/mhpc/flash.c
@@ -0,0 +1,453 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <linux/byteorder/swab.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) __swab16(x)
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+ size_b0 = flash_get_size((FPW *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000);
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F640J5 :
+ printf ("28F640J5 \n"); break;
+ default: printf ("Unknown Chip Type=0x%lXh\n",
+ info->flash_id & FLASH_TYPEMASK); break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+ FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW)0xAA00AA00;
+ addr[0x2AAA] = (FPW)0x55005500;
+ addr[0x5555] = (FPW)0x90009000;
+
+ value = SWAP(addr[0]);
+
+ switch (value) {
+ case (FPW)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW)0xFF00FF00; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ value = SWAP(addr[1]); /* device ID no swap !*/
+
+ switch (value) {
+ case (FPW)INTEL_ID_28F640J5 :
+ info->flash_id += FLASH_28F640J5 ;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW)0xFF00FF00; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, now, last;
+ int rc = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *)(info->start[sect]);
+ FPW status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = (FPW)0x50005000; /* clear status register */
+ *addr = (FPW)0x20002000; /* erase setup */
+ *addr = (FPW)0xD000D000; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW)0xB000B000; /* suspend erase */
+ *addr = (FPW)0xFF00FF00; /* reset to read mode */
+ rc = 1;
+ break;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ *addr = (FPW)0xFF00FF00; /* reset to read mode */
+ printf (" done\n");
+ }
+ }
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<port_width && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_data(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i=0; i<port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if ((wp & 0xfff) == 0)
+ {
+ printf("%08lX",wp);
+ printf("\x1b[8D");
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_data(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *)dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = (FPW)0x40004000; /* write setup */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW)0xFF00FF00; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW)0xFF00FF00; /* restore read mode */
+
+ return (0);
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/board/ep8260/flash.c b/board/ep8260/flash.c
new file mode 100644
index 0000000000..cae8a13dde
--- /dev/null
+++ b/board/ep8260/flash.c
@@ -0,0 +1,396 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Frank Panno <fpanno@delphintech.com>, Delphin Technology AG
+ *
+ * Flash Routines for AMD device AM29DL323DB on the EP8260 board.
+ *
+ * This file is based on board/tqm8260/flash.c.
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define V_ULONG(a) (*(volatile unsigned long *)( a ))
+#define V_BYTE(a) (*(volatile unsigned char *)( a ))
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+
+/*-----------------------------------------------------------------------
+ */
+void flash_reset(void)
+{
+ if( flash_info[0].flash_id != FLASH_UNKNOWN ) {
+ V_ULONG( flash_info[0].start[0] ) = 0x00F000F0;
+ V_ULONG( flash_info[0].start[0] + 4 ) = 0x00F000F0;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_get_size( ulong baseaddr, flash_info_t *info )
+{
+ short i;
+ unsigned long flashtest_h, flashtest_l;
+
+ /* Write auto select command sequence and test FLASH answer */
+ V_ULONG(baseaddr + ((ulong)0x0555 << 3)) = 0x00AA00AA;
+ V_ULONG(baseaddr + ((ulong)0x02AA << 3)) = 0x00550055;
+ V_ULONG(baseaddr + ((ulong)0x0555 << 3)) = 0x00900090;
+ V_ULONG(baseaddr + 4 + ((ulong)0x0555 << 3)) = 0x00AA00AA;
+ V_ULONG(baseaddr + 4 + ((ulong)0x02AA << 3)) = 0x00550055;
+ V_ULONG(baseaddr + 4 + ((ulong)0x0555 << 3)) = 0x00900090;
+
+ flashtest_h = V_ULONG(baseaddr); /* manufacturer ID */
+ flashtest_l = V_ULONG(baseaddr + 4);
+
+ if ((int)flashtest_h == AMD_MANUFACT) {
+ info->flash_id = FLASH_MAN_AMD;
+ } else {
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ flashtest_h = V_ULONG(baseaddr + 8); /* device ID */
+ flashtest_l = V_ULONG(baseaddr + 12);
+ if (flashtest_h != flashtest_l) {
+ info->flash_id = FLASH_UNKNOWN;
+ return(0);
+ }
+ if (flashtest_h == AMD_ID_DL323B) {
+ info->flash_id += FLASH_AMDL323B;
+ info->sector_count = 71;
+ info->size = 0x01000000; /* 4 * 4 MB = 16 MB */
+ } else {
+ info->flash_id = FLASH_UNKNOWN;
+ return(0); /* no or unknown flash */
+ }
+
+ /* set up sector start adress table (bottom sector type) */
+ for (i = 0; i < 8; i++) {
+ info->start[i] = baseaddr + (i * 0x00008000);
+ }
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = baseaddr + (i * 0x00040000) - 0x001C0000;
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ if ((V_ULONG( info->start[i] + 16 ) & 0x00010001) ||
+ (V_ULONG( info->start[i] + 20 ) & 0x00010001)) {
+ info->protect[i] = 1; /* D0 = 1 if protected */
+ } else {
+ info->protect[i] = 0;
+ }
+ }
+
+ flash_reset();
+ return(info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+ unsigned long size_b0 = 0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here (only one bank) */
+
+ size_b0 = flash_get_size(CFG_FLASH0_BASE, &flash_info[0]);
+ if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0>>20);
+ }
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch ((info->flash_id >> 16) & 0xff) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMDL323B: printf ("29DL323B (32 M, bottom sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00AA00AA;
+ V_ULONG( info->start[0] + (0x02AA << 3) ) = 0x00550055;
+ V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00800080;
+ V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00AA00AA;
+ V_ULONG( info->start[0] + (0x02AA << 3) ) = 0x00550055;
+ V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00AA00AA;
+ V_ULONG( info->start[0] + 4 + (0x02AA << 3) ) = 0x00550055;
+ V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00800080;
+ V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00AA00AA;
+ V_ULONG( info->start[0] + 4 + (0x02AA << 3) ) = 0x00550055;
+ udelay (1000);
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ V_ULONG( info->start[sect] ) = 0x00300030;
+ V_ULONG( info->start[sect] + 4 ) = 0x00300030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ while ((V_ULONG( info->start[l_sect] ) & 0x00800080) != 0x00800080 ||
+ (V_ULONG( info->start[l_sect] + 4 ) & 0x00800080) != 0x00800080)
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ flash_reset ();
+
+ printf (" done\n");
+ return 0;
+}
+
+static int write_dword (flash_info_t *, ulong, unsigned char *);
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong dp;
+ static unsigned char bb[8];
+ int i, l, rc, cc = cnt;
+
+ dp = (addr & ~7); /* get lower dword aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - dp) != 0) {
+ for (i = 0; i < 8; i++)
+ bb[i] = (i < l || (i-l) >= cc) ? V_BYTE(dp+i) : *src++;
+ if ((rc = write_dword(info, dp, bb)) != 0)
+ {
+ return (rc);
+ }
+ dp += 8;
+ cc -= 8 - l;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cc >= 8) {
+ if ((rc = write_dword(info, dp, src)) != 0) {
+ return (rc);
+ }
+ dp += 8;
+ src += 8;
+ cc -= 8;
+ }
+
+ if (cc <= 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ for (i = 0; i < 8; i++) {
+ bb[i] = (i < cc) ? *src++ : V_BYTE(dp+i);
+ }
+ return (write_dword(info, dp, bb));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a dword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_dword (flash_info_t *info, ulong dest, unsigned char * pdata)
+{
+ ulong start;
+ ulong cl = 0, ch =0;
+ int flag, i;
+
+ for (ch=0, i=0; i < 4; i++)
+ ch = (ch << 8) + *pdata++; /* high word */
+ for (cl=0, i=0; i < 4; i++)
+ cl = (cl << 8) + *pdata++; /* low word */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & ch) != ch
+ ||(*((vu_long *)(dest + 4)) & cl) != cl)
+ {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00AA00AA;
+ V_ULONG( info->start[0] + (0x02AA << 3) ) = 0x00550055;
+ V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00A000A0;
+ V_ULONG( dest ) = ch;
+ V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00AA00AA;
+ V_ULONG( info->start[0] + 4 + (0x02AA << 3) ) = 0x00550055;
+ V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00A000A0;
+ V_ULONG( dest + 4 ) = cl;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while (((V_ULONG( dest ) & 0x00800080) != (ch & 0x00800080)) ||
+ ((V_ULONG( dest + 4 ) & 0x00800080) != (cl & 0x00800080))) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
diff --git a/board/ep8260/mii_phy.c b/board/ep8260/mii_phy.c
new file mode 100644
index 0000000000..e3b7878aa1
--- /dev/null
+++ b/board/ep8260/mii_phy.c
@@ -0,0 +1,108 @@
+#include <common.h>
+#include <mii_phy.h>
+#include "ep8260.h"
+
+#define MII_MDIO 0x01
+#define MII_MDCK 0x02
+#define MII_MDIR 0x04
+
+void
+mii_discover_phy(void)
+{
+ int known;
+ unsigned short phy_reg;
+ unsigned long phy_id;
+
+ known = 0;
+ printf("Discovering phy @ 0: ");
+ phy_id = mii_phy_read(2) << 16;
+ phy_id |= mii_phy_read(3);
+ if ((phy_id & 0xFFFFFC00) == 0x00137800) {
+ printf("Level One ");
+ if ((phy_id & 0x000003F0) == 0xE0) {
+ printf("LXT971A Revision %d\n", (int)(phy_id & 0xF));
+ known = 1;
+ }
+ else printf("unknown type\n");
+ }
+ else printf("unknown OUI = 0x%08lX\n", phy_id);
+
+ phy_reg = mii_phy_read(1);
+ if (!(phy_reg & 0x0004)) printf("Link is down\n");
+ if (!(phy_reg & 0x0020)) printf("Auto-negotiation not complete\n");
+ if (phy_reg & 0x0002) printf("Jabber condition detected\n");
+ if (phy_reg & 0x0010) printf("Remote fault condition detected \n");
+
+ if (known) {
+ phy_reg = mii_phy_read(17);
+ if (phy_reg & 0x0400)
+ printf("Phy operating at %d MBit/s in %s-duplex mode\n",
+ phy_reg & 0x4000 ? 100 : 10,
+ phy_reg & 0x0200 ? "full" : "half");
+ else
+ printf("bad link!!\n");
+/*
+left off: no link, green 100MBit, yellow 10MBit
+right off: no activity, green full-duplex, yellow half-duplex
+*/
+ mii_phy_write(20, 0x0452);
+ }
+}
+
+unsigned short
+mii_phy_read(unsigned short reg)
+{
+ int i;
+ unsigned short tmp, val = 0, adr = 0;
+ t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+
+ tmp = 0x6002 | (adr << 7) | (reg << 2);
+ regs->bcsr4 = 0xC3;
+ for (i = 0; i < 64; i++) {
+ regs->bcsr4 ^= MII_MDCK;
+ }
+ for (i = 0; i < 16; i++) {
+ regs->bcsr4 &= ~MII_MDCK;
+ if (tmp & 0x8000) regs->bcsr4 |= MII_MDIO;
+ else regs->bcsr4 &= ~MII_MDIO;
+ regs->bcsr4 |= MII_MDCK;
+ tmp <<= 1;
+ }
+ regs->bcsr4 |= MII_MDIR;
+ for (i = 0; i < 16; i++) {
+ val <<= 1;
+ regs->bcsr4 = MII_MDIO | (regs->bcsr4 | MII_MDCK);
+ if (regs->bcsr4 & MII_MDIO) val |= 1;
+ regs->bcsr4 = MII_MDIO | (regs->bcsr4 &= ~MII_MDCK);
+ }
+ return val;
+}
+
+void
+mii_phy_write(unsigned short reg, unsigned short val)
+{
+ int i;
+ unsigned short tmp, adr = 0;
+ t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+
+ tmp = 0x5002 | (adr << 7) | (reg << 2);
+ regs->bcsr4 = 0xC3;
+ for (i = 0; i < 64; i++) {
+ regs->bcsr4 ^= MII_MDCK;
+ }
+ for (i = 0; i < 16; i++) {
+ regs->bcsr4 &= ~MII_MDCK;
+ if (tmp & 0x8000) regs->bcsr4 |= MII_MDIO;
+ else regs->bcsr4 &= ~MII_MDIO;
+ regs->bcsr4 |= MII_MDCK;
+ tmp <<= 1;
+ }
+ for (i = 0; i < 16; i++) {
+ regs->bcsr4 &= ~MII_MDCK;
+ if (val & 0x8000) regs->bcsr4 |= MII_MDIO;
+ else regs->bcsr4 &= ~MII_MDIO;
+ regs->bcsr4 |= MII_MDCK;
+ val <<= 1;
+ }
+}
+
diff --git a/board/esd/adciop/flash.c b/board/esd/adciop/flash.c
new file mode 100644
index 0000000000..46ae03b3c0
--- /dev/null
+++ b/board/esd/adciop/flash.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ FLASH_BASE0_PRELIM+size_b0-CFG_MONITOR_LEN,
+ FLASH_BASE0_PRELIM+size_b0-1,
+ &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(FLASH_BASE0_PRELIM + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (FLASH_BASE0_PRELIM + size_b0, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ FLASH_BASE0_PRELIM+size_b0+size_b1-CFG_MONITOR_LEN,
+ FLASH_BASE0_PRELIM+size_b0+size_b1-1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ flash_protect(FLAG_PROTECT_CLEAR,
+ FLASH_BASE0_PRELIM+size_b0-CFG_MONITOR_LEN,
+ FLASH_BASE0_PRELIM+size_b0-1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c
new file mode 100644
index 0000000000..78a1e0f298
--- /dev/null
+++ b/board/esd/common/flash.c
@@ -0,0 +1,646 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+ short n;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
+ /* set sector offsets for bottom boot block type */
+ for (i=0; i<8; ++i) { /* 8 x 8k boot sectors */
+ info->start[i] = base;
+ base += 8 << 10;
+ }
+ while (i < info->sector_count) { /* 64k regular sectors */
+ info->start[i] = base;
+ base += 64 << 10;
+ ++i;
+ }
+ } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
+ /* set sector offsets for top boot block type */
+ base += info->size;
+ i = info->sector_count;
+ for (n=0; n<8; ++n) { /* 8 x 8k boot sectors */
+ base -= 8 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ while (i > 0) { /* 64k regular sectors */
+ base -= 64 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 M, top sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 M, bottom sector)\n");
+ break;
+ case FLASH_AMDL322T: printf ("AM29DL322T (32 M, top sector)\n");
+ break;
+ case FLASH_AMDL322B: printf ("AM29DL322B (32 M, bottom sector)\n");
+ break;
+ case FLASH_AMDL323T: printf ("AM29DL323T (32 M, top sector)\n");
+ break;
+ case FLASH_AMDL323B: printf ("AM29DL323B (32 M, bottom sector)\n");
+ break;
+ case FLASH_AM640U: printf ("AM29LV640D (64 M, uniform sector)\n");
+ break;
+ case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+#ifdef CFG_FLASH_EMPTY_INFO
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+ /* print empty and read-only info */
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " ");
+#else
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+#endif
+
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ short n;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+
+ value = addr2[CFG_FLASH_READ0];
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[CFG_FLASH_READ1]; /* device ID */
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+ info->flash_id += FLASH_AMDL322T;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+ info->flash_id += FLASH_AMDL322B;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+ info->flash_id += FLASH_AMDL323T;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+ info->flash_id += FLASH_AMDL323B;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
+ info->flash_id += FLASH_AM640U;
+ info->sector_count = 128;
+ info->size = 0x00800000; break; /* => 8 MB */
+
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A:
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
+ /* set sector offsets for bottom boot block type */
+ for (i=0; i<8; ++i) { /* 8 x 8k boot sectors */
+ info->start[i] = base;
+ base += 8 << 10;
+ }
+ while (i < info->sector_count) { /* 64k regular sectors */
+ info->start[i] = base;
+ base += 64 << 10;
+ ++i;
+ }
+ } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
+ /* set sector offsets for top boot block type */
+ base += info->size;
+ i = info->sector_count;
+ for (n=0; n<8; ++n) { /* 8 x 8k boot sectors */
+ base -= 8 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ while (i > 0) { /* 64k regular sectors */
+ base -= 64 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050; /* block erase */
+ for (i=0; i<50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ if (sect == s_first) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+ }
+ addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+ ulong start;
+ int flag;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
+ (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+ {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
new file mode 100644
index 0000000000..70f7de4f08
--- /dev/null
+++ b/board/esd/cpci405/flash.c
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+ int size_val = 0;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ base_b0 = FLASH_BASE0_PRELIM;
+ size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ base_b1 = FLASH_BASE1_PRELIM;
+ size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr (ebccfga, pb0cr);
+ pbcr = mfdcr (ebccfgd);
+ mtdcr (ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ switch (size_b1) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ default:
+ size_val = 0;
+ break;
+
+ }
+ pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17);
+ mtdcr (ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr (ebccfga, pb1cr);
+ pbcr = mfdcr (ebccfgd);
+ mtdcr (ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ switch (size_b1) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+ mtdcr (ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ base_b1 + size_b1 - CFG_MONITOR_LEN,
+ base_b1 + size_b1 - 1, &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ flash_protect (FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
new file mode 100644
index 0000000000..4608da71a0
--- /dev/null
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+
+#define OK 0
+#define ERROR (-1)
+
+#define TRUE 1
+#define FALSE 0
+
+
+extern u_long pci9054_iobase;
+
+
+/***************************************************************************
+ *
+ * Routines for PLX PCI9054 eeprom access
+ *
+ */
+
+static unsigned int PciEepromReadLongVPD(int offs)
+{
+ unsigned int value;
+ unsigned int ret;
+ int count;
+
+ pci_write_config_dword(CFG_PCI9054_DEV_FN, 0x4c, (offs<<16) | 0x0003);
+ count = 0;
+
+ for (;;)
+ {
+ udelay(10 * 1000);
+ pci_read_config_dword(CFG_PCI9054_DEV_FN, 0x4c, &ret);
+ if ((ret & 0x80000000) != 0)
+ {
+ break;
+ }
+ else
+ {
+ count++;
+ if (count > 10)
+ {
+ printf("\nTimeout: ret=%08x - Please try again!\n", ret);
+ break;
+ }
+ }
+ }
+
+ pci_read_config_dword(CFG_PCI9054_DEV_FN, 0x50, &value);
+
+ return value;
+}
+
+
+static int PciEepromWriteLongVPD(int offs, unsigned int value)
+{
+ unsigned int ret;
+ int count;
+
+ pci_write_config_dword(CFG_PCI9054_DEV_FN, 0x50, value);
+ pci_write_config_dword(CFG_PCI9054_DEV_FN, 0x4c, (offs<<16) | 0x80000003);
+ count = 0;
+
+ for (;;)
+ {
+ udelay(10 * 1000);
+ pci_read_config_dword(CFG_PCI9054_DEV_FN, 0x4c, &ret);
+ if ((ret & 0x80000000) == 0)
+ {
+ break;
+ }
+ else
+ {
+ count++;
+ if (count > 10)
+ {
+ printf("\nTimeout: ret=%08x - Please try again!\n", ret);
+ break;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+
+static void showPci9054(void)
+{
+ int val;
+ int l, i;
+
+ /* read 9054-values */
+ for (l=0; l<6; l++)
+ {
+ printf("%02x: ", l*0x10);
+ for (i=0; i<4; i++)
+ {
+ pci_read_config_dword(CFG_PCI9054_DEV_FN, l*16+i*4, &val);
+ printf("%08x ", val);
+ }
+ printf("\n");
+ }
+ printf("\n");
+
+ for (l=0; l<7; l++)
+ {
+ printf("%02x: ", l*0x10);
+ for (i=0; i<4; i++)
+ printf("%08x ", PciEepromReadLongVPD((i+l*4)*4));
+ printf("\n");
+ }
+ printf("\n");
+}
+
+
+static void updatePci9054(void)
+{
+ int val;
+
+ /*
+ * Set EEPROM write-protect register to 0
+ */
+ out32(pci9054_iobase+0x0c, in32(pci9054_iobase+0x0c) & 0xffff00ff);
+
+ /* Long Serial EEPROM Load Registers... */
+ val = PciEepromWriteLongVPD(0x00, 0x905410b5);
+ val = PciEepromWriteLongVPD(0x04, 0x09800001); /* other input controller */
+ val = PciEepromWriteLongVPD(0x08, 0x28140100);
+
+ val = PciEepromWriteLongVPD(0x0c, 0x00000000); /* MBOX0... */
+ val = PciEepromWriteLongVPD(0x10, 0x00000000);
+
+ /* las0: fpga access (0x0000.0000 ... 0x0003.ffff) */
+ val = PciEepromWriteLongVPD(0x14, 0xfffc0000); /* LAS0RR... */
+ val = PciEepromWriteLongVPD(0x18, 0x00000001); /* LAS0BA */
+
+ val = PciEepromWriteLongVPD(0x1c, 0x00200000); /* MARBR... */
+ val = PciEepromWriteLongVPD(0x20, 0x00300500); /* LMISC/BIGEND */
+
+ val = PciEepromWriteLongVPD(0x24, 0x00000000); /* EROMRR... */
+ val = PciEepromWriteLongVPD(0x28, 0x00000000); /* EROMBA */
+
+ val = PciEepromWriteLongVPD(0x2c, 0x43030000); /* LBRD0... */
+
+ val = PciEepromWriteLongVPD(0x30, 0x00000000); /* DMRR... */
+ val = PciEepromWriteLongVPD(0x34, 0x00000000);
+ val = PciEepromWriteLongVPD(0x38, 0x00000000);
+
+ val = PciEepromWriteLongVPD(0x3c, 0x00000000); /* DMPBAM... */
+ val = PciEepromWriteLongVPD(0x40, 0x00000000);
+
+ /* Extra Long Serial EEPROM Load Registers... */
+ val = PciEepromWriteLongVPD(0x44, 0x010212fe); /* PCISID... */
+
+ /* las1: 505-sram access (0x0004.0000 ... 0x001f.ffff) */
+ /* Offset to LAS1: Group 1: 0x00040000 */
+ /* Group 2: 0x00080000 */
+ /* Group 3: 0x000c0000 */
+ val = PciEepromWriteLongVPD(0x48, 0xffe00000); /* LAS1RR */
+ val = PciEepromWriteLongVPD(0x4c, 0x00040001); /* LAS1BA */
+ val = PciEepromWriteLongVPD(0x50, 0x00000208); /* LBRD1 */ /* so wars bisher */
+
+ val = PciEepromWriteLongVPD(0x54, 0x00004c06); /* HotSwap... */
+
+ printf("Finished writing defaults into PLX PCI9054 EEPROM!\n");
+}
+
+
+static void clearPci9054(void)
+{
+ int val;
+
+ /*
+ * Set EEPROM write-protect register to 0
+ */
+ out32(pci9054_iobase+0x0c, in32(pci9054_iobase+0x0c) & 0xffff00ff);
+
+ /* Long Serial EEPROM Load Registers... */
+ val = PciEepromWriteLongVPD(0x00, 0xffffffff);
+ val = PciEepromWriteLongVPD(0x04, 0xffffffff); /* other input controller */
+
+ printf("Finished clearing PLX PCI9054 EEPROM!\n");
+}
+
+
+/* ------------------------------------------------------------------------- */
+int do_pci9054(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+ if (strcmp(argv[1], "info") == 0)
+ {
+ showPci9054();
+ return 0;
+ }
+
+ if (strcmp(argv[1], "update") == 0)
+ {
+ updatePci9054();
+ return 0;
+ }
+
+ if (strcmp(argv[1], "clear") == 0)
+ {
+ clearPci9054();
+ return 0;
+ }
+
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
new file mode 100644
index 0000000000..2574eac7fd
--- /dev/null
+++ b/board/esd/dasa_sim/flash.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0;
+ int i;
+ unsigned long base_b0;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Setup offsets */
+ flash_get_offsets (-size_b0, &flash_info[0]);
+
+ base_b0 = -size_b0;
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
diff --git a/board/esd/du405/flash.c b/board/esd/du405/flash.c
new file mode 100644
index 0000000000..97d832228e
--- /dev/null
+++ b/board/esd/du405/flash.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ base_b0 = FLASH_BASE0_PRELIM;
+ size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ base_b1 = FLASH_BASE1_PRELIM;
+ size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr (ebccfga, pb0cr);
+ pbcr = mfdcr (ebccfgd);
+ mtdcr (ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 |
+ (((size_b1 / 1024 / 1024) - 1) << 17);
+ mtdcr (ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr (ebccfga, pb1cr);
+ pbcr = mfdcr (ebccfgd);
+ mtdcr (ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 |
+ (((size_b0 / 1024 / 1024) - 1) << 17);
+ mtdcr (ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ base_b1 + size_b1 - CFG_MONITOR_LEN,
+ base_b1 + size_b1 - 1, &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ flash_protect (FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c
new file mode 100644
index 0000000000..90965eadf5
--- /dev/null
+++ b/board/esd/ocrtc/flash.c
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+ int size_val = 0;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ base_b0 = FLASH_BASE0_PRELIM;
+ size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ base_b1 = FLASH_BASE1_PRELIM;
+ size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr (ebccfga, pb0cr);
+ pbcr = mfdcr (ebccfgd);
+ mtdcr (ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ switch (size_b1) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17);
+ mtdcr (ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr (ebccfga, pb1cr);
+ pbcr = mfdcr (ebccfgd);
+ mtdcr (ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ switch (size_b1) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+ mtdcr (ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ base_b1 + size_b1 - CFG_MONITOR_LEN,
+ base_b1 + size_b1 - 1, &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ flash_protect (FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
diff --git a/board/esd/pci405/flash.c b/board/esd/pci405/flash.c
new file mode 100644
index 0000000000..f904affc4f
--- /dev/null
+++ b/board/esd/pci405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0;
+ int i;
+ uint pbcr;
+ unsigned long base_b0;
+ int size_val = 0;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Setup offsets */
+ flash_get_offsets (-size_b0, &flash_info[0]);
+
+ /* Re-do sizing to get full correct info */
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b0 = -size_b0;
+ switch (size_b0) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+ mtdcr(ebccfgd, pbcr);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
diff --git a/board/esteem192e/flash.c b/board/esteem192e/flash.c
new file mode 100644
index 0000000000..55845fac11
--- /dev/null
+++ b/board/esteem192e/flash.c
@@ -0,0 +1,1096 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#ifdef CONFIG_FLASH_16BIT
+#define FLASH_WORD_SIZE unsigned short
+#define FLASH_ID_MASK 0xFFFF
+#else
+#define FLASH_WORD_SIZE unsigned long
+#define FLASH_ID_MASK 0xFFFFFFFF
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
+#ifndef CONFIG_FLASH_16BIT
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#else
+static int write_short (flash_info_t *info, ulong dest, ushort data);
+#endif
+/*int flash_write (uchar *, ulong, ulong); */
+/*flash_info_t *addr2info (ulong); */
+
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE0_PRELIM,
+ &flash_info[0]);
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM,
+ &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = CFG_FLASH_BASE | 0x00000801; /* (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;*/
+
+ /* Re-do sizing to get full correct info */
+
+ size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)CFG_FLASH_BASE,
+ &flash_info[0]);
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+ memctl->memc_br1 = (CFG_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
+ /*((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_V;*/
+
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+ } else {
+ memctl->memc_br1 = 0; /* invalidate bank */
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start adress table */
+ if (info->flash_id & FLASH_BTYPE) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CONFIG_FLASH_16BIT
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00008000;
+ info->start[3] = base + 0x0000C000;
+ info->start[4] = base + 0x00010000;
+ info->start[5] = base + 0x00014000;
+ info->start[6] = base + 0x00018000;
+ info->start[7] = base + 0x0001C000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x000E0000;
+ }
+ }
+ else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ }
+#else
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00002000;
+ info->start[2] = base + 0x00004000;
+ info->start[3] = base + 0x00006000;
+ info->start[4] = base + 0x00008000;
+ info->start[5] = base + 0x0000A000;
+ info->start[6] = base + 0x0000C000;
+ info->start[7] = base + 0x0000E000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00070000;
+ }
+ }
+ else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ }
+#endif
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CONFIG_FLASH_16BIT
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00014000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x0001C000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+
+ } else {
+
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+#else
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000A000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x0000E000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+
+ } else {
+
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+#endif
+ }
+
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ uchar *boottype;
+ uchar botboot[]=", bottom boot sect)\n";
+ uchar topboot[]=", top boot sector)\n";
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ if (info->flash_id & 0x0001 ) {
+ boottype = botboot;
+ } else {
+ boottype = topboot;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit%s",boottype);
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit%s",boottype);
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit%s",boottype);
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit%s",boottype);
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit%s",boottype);
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit%s",boottype);
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit%s",boottype);
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL800B: printf ("INTEL28F800B (8 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL800T: printf ("INTEL28F800T (8 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL160B: printf ("INTEL28F160B (16 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL160T: printf ("INTEL28F160T (16 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL320B: printf ("INTEL28F320B (32 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL320T: printf ("INTEL28F320T (32 Mbit%s",boottype);
+ break;
+
+#if 0 /* enable when devices are available */
+
+ case FLASH_INTEL640B: printf ("INTEL28F640B (64 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL640T: printf ("INTEL28F640T (64 Mbit%s",boottype);
+ break;
+#endif
+
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
+{
+ short i;
+ ulong base = (ulong)addr;
+ FLASH_WORD_SIZE value;
+
+ /* Write auto select command: read Manufacturer ID */
+
+
+#ifndef CONFIG_FLASH_16BIT
+
+ /*
+ * Note: if it is an AMD flash and the word at addr[0000]
+ * is 0x00890089 this routine will think it is an Intel
+ * flash device and may(most likely) cause trouble.
+ */
+
+ addr[0x0000] = 0x00900090;
+ if(addr[0x0000] != 0x00890089){
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+#else
+
+ /*
+ * Note: if it is an AMD flash and the word at addr[0000]
+ * is 0x0089 this routine will think it is an Intel
+ * flash device and may(most likely) cause trouble.
+ */
+
+ addr[0x0000] = 0x0090;
+
+ if(addr[0x0000] != 0x0089){
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0090;
+#endif
+ }
+ value = addr[0];
+
+ switch (value) {
+ case (AMD_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FUJ_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (STM_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case (SST_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (INTEL_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+
+ case (AMD_ID_LV400T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV400B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV800T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV800B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV160T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV160B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case (AMD_ID_LV320T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (AMD_ID_LV320B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+
+ case (INTEL_ID_28F800B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL800T;
+ info->sector_count = 23;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (INTEL_ID_28F800B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL800B;
+ info->sector_count = 23;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (INTEL_ID_28F160B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL160T;
+ info->sector_count = 39;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (INTEL_ID_28F160B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL160B;
+ info->sector_count = 39;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL320T;
+ info->sector_count = 71;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+#if 0 /* enable when devices are available */
+ case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL320T;
+ info->sector_count = 135;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 135;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start adress table */
+ if (info->flash_id & FLASH_BTYPE) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CONFIG_FLASH_16BIT
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00008000;
+ info->start[3] = base + 0x0000C000;
+ info->start[4] = base + 0x00010000;
+ info->start[5] = base + 0x00014000;
+ info->start[6] = base + 0x00018000;
+ info->start[7] = base + 0x0001C000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x000E0000;
+ }
+ }
+ else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ }
+#else
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00002000;
+ info->start[2] = base + 0x00004000;
+ info->start[3] = base + 0x00006000;
+ info->start[4] = base + 0x00008000;
+ info->start[5] = base + 0x0000A000;
+ info->start[6] = base + 0x0000C000;
+ info->start[7] = base + 0x0000E000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00070000;
+ }
+ }
+ else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ }
+#endif
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CONFIG_FLASH_16BIT
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00014000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x0001C000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+
+ } else {
+
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+#else
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000A000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x0000E000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+
+ } else {
+
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+#endif
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+ if( (info->flash_id & 0xFF00) == FLASH_MAN_INTEL){
+ *addr = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
+ *addr = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+ }
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+
+ volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+ int flag, prot, sect, l_sect, barf;
+ ulong start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ ((info->flash_id > FLASH_AMD_COMP) &&
+ ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ if(info->flash_id < FLASH_AMD_COMP) {
+#ifndef CONFIG_FLASH_16BIT
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+#else
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0080;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+#endif
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
+ addr[0] = (0x00300030 & FLASH_ID_MASK);
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
+ while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
+ (0x00800080&FLASH_ID_MASK) )
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
+
+
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ barf = 0;
+#ifndef CONFIG_FLASH_16BIT
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x00200020;
+ addr[0] = 0x00D000D0;
+ while(!(addr[0] & 0x00800080)); /* wait for error or finish */
+ if( addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if( barf ) {
+ barf >>=16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ }
+#else
+ addr = (vu_short*)(info->start[sect]);
+ addr[0] = 0x0020;
+ addr[0] = 0x00D0;
+ while(!(addr[0] & 0x0080)); /* wait for error or finish */
+ if( addr[0] & 0x003A) /* check for error */
+ barf = addr[0] & 0x003A;
+#endif
+ if(barf) {
+ printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
+ if(barf & 0x0002) printf("Block locked, not erased.\n");
+ if((barf & 0x0030) == 0x0030)
+ printf("Command Sequence error.\n");
+ if((barf & 0x0030) == 0x0020)
+ printf("Block Erase error.\n");
+ if(barf & 0x0008) printf("Vpp Low error.\n");
+ rcode = 1;
+ } else printf(".");
+ l_sect = sect;
+ }
+ addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+
+ }
+
+ }
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+#ifndef CONFIG_FLASH_16BIT
+ ulong cp, wp, data;
+ int l;
+#else
+ ulong cp, wp;
+ ushort data;
+#endif
+ int i, rc;
+
+#ifndef CONFIG_FLASH_16BIT
+
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+
+#else
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start byte
+ */
+ if (addr - wp) {
+ data = 0;
+ data = (data << 8) | *src++;
+ --cnt;
+ if ((rc = write_short(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ }
+
+ /*
+ * handle word aligned part
+ */
+/* l = 0; used for debuging */
+ while (cnt >= 2) {
+ data = 0;
+ for (i=0; i<2; ++i) {
+ data = (data << 8) | *src++;
+ }
+
+/* if(!l){
+ printf("%x",data);
+ l = 1;
+ } used for debuging */
+
+ if ((rc = write_short(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ cnt -= 2;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<2; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_short(info, wp, data));
+
+
+#endif
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifndef CONFIG_FLASH_16BIT
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start,barf;
+ int flag;
+
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ if(info->flash_id > FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00400040;
+ }
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+
+ if(info->flash_id > FLASH_AMD_COMP) {
+
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+ } else {
+
+ while(!(addr[0] & 0x00800080)){ /* wait for error or finish */
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+
+ if( addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if( barf ) {
+ barf >>=16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ printf("\nFlash write error at address %lx\n",(unsigned long)dest);
+ if(barf & 0x0002) printf("Block locked, not erased.\n");
+ if(barf & 0x0010) printf("Programming error.\n");
+ if(barf & 0x0008) printf("Vpp Low error.\n");
+ return(2);
+ }
+
+
+ }
+
+ return (0);
+
+}
+
+#else
+
+static int write_short (flash_info_t *info, ulong dest, ushort data)
+{
+ vu_short *addr = (vu_short*)(info->start[0]);
+ ulong start,barf;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_short *)dest) & data) != data) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ if(info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00D0;
+ *addr = 0x0040;
+ }
+ *((vu_short *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+
+ if(info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+ } else {
+ /* intel stuff */
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+ }
+
+ if( addr[0] & 0x003A) { /* check for error */
+ barf = addr[0] & 0x003A;
+ printf("\nFlash write error at address %lx\n",(unsigned long)dest);
+ if(barf & 0x0002) printf("Block locked, not erased.\n");
+ if(barf & 0x0010) printf("Programming error.\n");
+ if(barf & 0x0008) printf("Vpp Low error.\n");
+ return(2);
+ }
+ *addr = 0x00B0;
+ *addr = 0x0070;
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+ }
+
+ *addr = 0x00FF;
+
+ }
+
+ return (0);
+
+}
+
+
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
diff --git a/board/etx094/flash.c b/board/etx094/flash.c
new file mode 100644
index 0000000000..b3c620e868
--- /dev/null
+++ b/board/etx094/flash.c
@@ -0,0 +1,744 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+#ifdef CONFIG_FLASH_16BIT
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */
+#else
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+#endif
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+#ifdef CONFIG_FLASH_16BIT
+ memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_V | BR_PS_16;
+#else
+ memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_V;
+#endif
+
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+ } else {
+ memctl->memc_br1 = 0; /* invalidate bank */
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00002000);
+ }
+ return;
+ }
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+#ifdef CONFIG_FLASH_16BIT
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+#else
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+#endif
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST200A: printf ("39xF200A (2M = 128K x 16)\n");
+ break;
+ case FLASH_SST400A: printf ("39xF400A (4M = 256K x 16)\n");
+ break;
+ case FLASH_SST800A: printf ("39xF800A (8M = 512K x 16)\n");
+ break;
+ case FLASH_STM800AB: printf ("M29W800AB (8M = 512K x 16)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+#ifdef CONFIG_FLASH_16BIT
+ vu_short *s_addr = (vu_short*)addr;
+ s_addr[0x5555] = 0x00AA;
+ s_addr[0x2AAA] = 0x0055;
+ s_addr[0x5555] = 0x0090;
+ value = s_addr[0];
+ value = value|(value<<16);
+#else
+ addr[0x5555] = 0x00AA00AA;
+ addr[0x2AAA] = 0x00550055;
+ addr[0x5555] = 0x00900090;
+ value = addr[0];
+#endif
+
+ switch (value) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+#ifdef CONFIG_FLASH_16BIT
+ value = s_addr[1];
+ value = value|(value<<16);
+#else
+ value = addr[1]; /* device ID */
+#endif
+
+ switch (value) {
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+#ifdef CONFIG_FLASH_16BIT
+ info->sector_count = 19;
+ info->size = 0x00100000; /* => 1 MB */
+#else
+ info->sector_count = 19;
+ info->size = 0x00200000; /* => 2 MB */
+#endif
+ break;
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+#ifdef CONFIG_FLASH_16BIT
+ info->sector_count = 35;
+ info->size = 0x00200000; /* => 2 MB */
+#else
+ info->sector_count = 35;
+ info->size = 0x00400000; /* => 4 MB */
+#endif
+
+ break;
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ case SST_ID_xF200A:
+ info->flash_id += FLASH_SST200A;
+ info->sector_count = 64; /* 39xF200A ID ( 2M = 128K x 16 ) */
+ info->size = 0x00080000;
+ break;
+ case SST_ID_xF400A:
+ info->flash_id += FLASH_SST400A;
+ info->sector_count = 128; /* 39xF400A ID ( 4M = 256K x 16 ) */
+ info->size = 0x00100000;
+ break;
+ case SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 256; /* 39xF800A ID ( 8M = 512K x 16 ) */
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ case STM_ID_x800AB:
+ info->flash_id += FLASH_STM800AB;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00002000);
+ }
+ } else { /* AMD and Fujitsu types */
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+#ifdef CONFIG_FLASH_16BIT
+
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+#else
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+#endif
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address:
+ * (A7 .. A0) = 0x02
+ * D0 = 1 if protected
+ */
+#ifdef CONFIG_FLASH_16BIT
+ s_addr = (volatile unsigned short *)(info->start[i]);
+ info->protect[i] = s_addr[2] & 1;
+#else
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+#endif
+ }
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+#ifdef CONFIG_FLASH_16BIT
+ s_addr = (volatile unsigned short *)(info->start[0]);
+ *s_addr = 0x00F0; /* reset bank */
+#else
+ addr = (volatile unsigned long *)info->start[0];
+ *addr = 0x00F000F0; /* reset bank */
+#endif
+
+ }
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect;
+ ulong start, now, last;
+#ifdef CONFIG_FLASH_16BIT
+ vu_short *s_addr = (vu_short*)addr;
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+/*#ifndef CONFIG_FLASH_16BIT
+ ulong type;
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_SST) && (type != FLASH_MAN_STM)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return;
+ }
+#endif*/
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+#ifdef CONFIG_FLASH_16BIT
+ vu_short *s_sect_addr = (vu_short*)(info->start[sect]);
+#else
+ vu_long *sect_addr = (vu_long*)(info->start[sect]);
+#endif
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#ifdef CONFIG_FLASH_16BIT
+
+ /*printf("\ns_sect_addr=%x",s_sect_addr);*/
+ s_addr[0x5555] = 0x00AA;
+ s_addr[0x2AAA] = 0x0055;
+ s_addr[0x5555] = 0x0080;
+ s_addr[0x5555] = 0x00AA;
+ s_addr[0x2AAA] = 0x0055;
+ s_sect_addr[0] = 0x0030;
+#else
+ addr[0x5555] = 0x00AA00AA;
+ addr[0x2AAA] = 0x00550055;
+ addr[0x5555] = 0x00800080;
+ addr[0x5555] = 0x00AA00AA;
+ addr[0x2AAA] = 0x00550055;
+ sect_addr[0] = 0x00300030;
+#endif
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+#ifdef CONFIG_FLASH_16BIT
+ while ((s_sect_addr[0] & 0x0080) != 0x0080) {
+#else
+ while ((sect_addr[0] & 0x00800080) != 0x00800080) {
+#endif
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ }
+ }
+
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+#ifdef CONFIG_FLASH_16BIT
+ s_addr[0] = 0x00F0; /* reset bank */
+#else
+ addr[0] = 0x00F000F0; /* reset bank */
+#endif
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+
+#ifdef CONFIG_FLASH_16BIT
+ vu_short high_data;
+ vu_short low_data;
+ vu_short *s_addr = (vu_short*)addr;
+#endif
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+#ifdef CONFIG_FLASH_16BIT
+ /* Write the 16 higher-bits */
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ high_data = ((data>>16) & 0x0000ffff);
+
+ s_addr[0x5555] = 0x00AA;
+ s_addr[0x2AAA] = 0x0055;
+ s_addr[0x5555] = 0x00A0;
+
+ *((vu_short *)dest) = high_data;
+
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+
+ /* Write the 16 lower-bits */
+#endif
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+#ifdef CONFIG_FLASH_16BIT
+ dest += 0x2;
+ low_data = (data & 0x0000ffff);
+
+ s_addr[0x5555] = 0x00AA;
+ s_addr[0x2AAA] = 0x0055;
+ s_addr[0x5555] = 0x00A0;
+ *((vu_short *)dest) = low_data;
+
+#else
+ addr[0x5555] = 0x00AA00AA;
+ addr[0x2AAA] = 0x00550055;
+ addr[0x5555] = 0x00A000A0;
+ *((vu_long *)dest) = data;
+#endif
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+
+#ifdef CONFIG_FLASH_16BIT
+ while ((*((vu_short *)dest) & 0x0080) != (low_data & 0x0080)) {
+#else
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+#endif
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c
new file mode 100644
index 0000000000..22cb8096c8
--- /dev/null
+++ b/board/evb64260/i2c.c
@@ -0,0 +1,315 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <malloc.h>
+#include <galileo/gt64260R.h>
+#include <galileo/core.h>
+
+#define MAX_I2C_RETRYS 10
+#define I2C_DELAY 1000 /* Should be at least the # of MHz of Tclk */
+#undef DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DP(x) x
+#else
+#define DP(x)
+#endif
+
+/* Assuming that there is only one master on the bus (us) */
+
+static void
+i2c_init(int speed, int slaveaddr)
+{
+ unsigned int n, m, freq, margin, power;
+ unsigned int actualFreq, actualN=0, actualM=0;
+ unsigned int control, status;
+ unsigned int minMargin = 0xffffffff;
+ unsigned int tclk = 125000000;
+
+ DP(puts("i2c_init\n"));
+
+ for(n = 0 ; n < 8 ; n++)
+ {
+ for(m = 0 ; m < 16 ; m++)
+ {
+ power = 2<<n; /* power = 2^(n+1) */
+ freq = tclk/(10*(m+1)*power);
+ if (speed > freq)
+ margin = speed - freq;
+ else
+ margin = freq - speed;
+ if(margin < minMargin)
+ {
+ minMargin = margin;
+ actualFreq = freq;
+ actualN = n;
+ actualM = m;
+ }
+ }
+ }
+
+ DP(puts("setup i2c bus\n"));
+
+ /* Setup bus */
+
+ GT_REG_WRITE(I2C_SOFT_RESET, 0);
+
+ DP(puts("udelay...\n"));
+
+ udelay(I2C_DELAY);
+
+ DP(puts("set baudrate\n"));
+
+ GT_REG_WRITE(I2C_STATUS_BAUDE_RATE, (actualM << 3) | actualN);
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 2) | (0x1 << 6));
+
+ udelay(I2C_DELAY * 10);
+
+ DP(puts("read control, baudrate\n"));
+
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ GT_REG_READ(I2C_CONTROL, &control);
+}
+
+static uchar
+i2c_start(void)
+{
+ unsigned int control, status;
+ int count = 0;
+
+ DP(puts("i2c_start\n"));
+
+ /* Set the start bit */
+
+ GT_REG_READ(I2C_CONTROL, &control);
+ control |= (0x1 << 5);
+ GT_REG_WRITE(I2C_CONTROL, control);
+
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+
+ count = 0;
+ while ((status & 0xff) != 0x08) {
+ udelay(I2C_DELAY);
+ if (count > 20) {
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
+ return (status);
+ }
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+
+ return (0);
+}
+
+static uchar
+i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
+{
+ unsigned int status, data, bits = 7;
+ int count = 0;
+
+ DP(puts("i2c_select_device\n"));
+
+ /* Output slave address */
+
+ if (ten_bit) {
+ bits = 10;
+ }
+
+ data = (dev_addr << 1);
+ /* set the read bit */
+ data |= read;
+ GT_REG_WRITE(I2C_DATA, data);
+ /* assert the address */
+ RESET_REG_BITS(I2C_CONTROL, BIT3);
+
+ udelay(I2C_DELAY);
+
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count = 0;
+ while (((status & 0xff) != 0x40) && ((status & 0xff) != 0x18)) {
+ udelay(I2C_DELAY);
+ if (count > 20) {
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
+ return(status);
+ }
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+
+ if (bits == 10) {
+ printf("10 bit I2C addressing not yet implemented\n");
+ return (0xff);
+ }
+
+ return (0);
+}
+
+static uchar
+i2c_get_data(uchar* return_data, int len) {
+
+ unsigned int data, status;
+ int count = 0;
+
+ DP(puts("i2c_get_data\n"));
+
+ while (len) {
+
+ /* Get and return the data */
+
+ RESET_REG_BITS(I2C_CONTROL, (0x1 << 3));
+
+ udelay(I2C_DELAY * 5);
+
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ while ((status & 0xff) != 0x50) {
+ udelay(I2C_DELAY);
+ if(count > 2) {
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
+ return 0;
+ }
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ GT_REG_READ(I2C_DATA, &data);
+ len--;
+ *return_data = (uchar)data;
+ return_data++;
+ }
+ RESET_REG_BITS(I2C_CONTROL, BIT2|BIT3);
+ while ((status & 0xff) != 0x58) {
+ udelay(I2C_DELAY);
+ if(count > 200) {
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
+ return (status);
+ }
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /* stop */
+
+ return (0);
+}
+
+static uchar
+i2c_write_data(unsigned int data, int len)
+{
+ unsigned int status;
+ int count = 0;
+
+ DP(puts("i2c_write_data\n"));
+
+ if (len > 4)
+ return -1;
+
+ while (len) {
+ /* Set and assert the data */
+
+ GT_REG_WRITE(I2C_DATA, (unsigned int)data);
+ RESET_REG_BITS(I2C_CONTROL, (0x1 << 3));
+
+ udelay(I2C_DELAY);
+
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ while ((status & 0xff) != 0x28) {
+ udelay(I2C_DELAY);
+ if(count > 20) {
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
+ return (status);
+ }
+ GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
+ count++;
+ }
+ len--;
+ }
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 3) | (0x1 << 4));
+ GT_REG_WRITE(I2C_CONTROL, (0x1 << 4));
+
+ udelay(I2C_DELAY * 10);
+
+ return (0);
+}
+
+static uchar
+i2c_set_dev_offset(uchar dev_addr, unsigned int offset, int ten_bit)
+{
+ uchar status;
+
+ DP(puts("i2c_set_dev_offset\n"));
+
+ status = i2c_select_device(dev_addr, 0, ten_bit);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Failed to select device setting offset: 0x%02x\n",
+ status);
+#endif
+ return status;
+ }
+
+ status = i2c_write_data(offset, 1);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Failed to write data: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ return (0);
+}
+
+uchar
+i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
+ int ten_bit)
+{
+ uchar status = 0;
+ unsigned int i2cFreq = 400000;
+
+ DP(puts("i2c_read\n"));
+
+ i2c_init(i2cFreq,0);
+
+ status = i2c_start();
+
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Transaction start failed: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ status = i2c_set_dev_offset(dev_addr, 0, 0);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Failed to set offset: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ i2c_init(i2cFreq,0);
+
+ status = i2c_start();
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Transaction restart failed: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ status = i2c_select_device(dev_addr, 1, ten_bit);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Address not acknowledged: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ status = i2c_get_data(data, len);
+ if (status) {
+#ifdef DEBUG_I2C
+ printf("Data not recieved: 0x%02x\n", status);
+#endif
+ return status;
+ }
+
+ return 0;
+}
diff --git a/board/evb64260/intel_flash.c b/board/evb64260/intel_flash.c
new file mode 100644
index 0000000000..ed6a2a0292
--- /dev/null
+++ b/board/evb64260/intel_flash.c
@@ -0,0 +1,277 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <galileo/gt64260R.h>
+#include <galileo/memory.h>
+#include "intel_flash.h"
+
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+static void
+bank_reset(flash_info_t *info, int sect)
+{
+ bank_addr_t addrw, eaddrw;
+
+ addrw = (bank_addr_t)info->start[sect];
+ eaddrw = BANK_ADDR_NEXT_WORD(addrw);
+
+ while (addrw < eaddrw) {
+#ifdef FLASH_DEBUG
+ printf(" writing reset cmd to addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ *addrw = BANK_CMD_RST;
+ addrw++;
+ }
+}
+
+static void
+bank_erase_init(flash_info_t *info, int sect)
+{
+ bank_addr_t addrw, saddrw, eaddrw;
+ int flag;
+
+#ifdef FLASH_DEBUG
+ printf("0x%08x BANK_CMD_PROG\n", BANK_CMD_PROG);
+ printf("0x%08x BANK_CMD_ERASE1\n", BANK_CMD_ERASE1);
+ printf("0x%08x BANK_CMD_ERASE2\n", BANK_CMD_ERASE2);
+ printf("0x%08x BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT);
+ printf("0x%08x BANK_CMD_RST\n", BANK_CMD_RST);
+ printf("0x%08x BANK_STAT_RDY\n", BANK_STAT_RDY);
+ printf("0x%08x BANK_STAT_ERR\n", BANK_STAT_ERR);
+#endif
+
+ saddrw = (bank_addr_t)info->start[sect];
+ eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
+
+#ifdef FLASH_DEBUG
+ printf("erasing sector %d, start addr = 0x%08lx "
+ "(bank next word addr = 0x%08lx)\n", sect,
+ (unsigned long)saddrw, (unsigned long)eaddrw);
+#endif
+
+ /* Disable intrs which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (addrw = saddrw; addrw < eaddrw; addrw++) {
+#ifdef FLASH_DEBUG
+ printf(" writing erase cmd to addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ *addrw = BANK_CMD_ERASE1;
+ *addrw = BANK_CMD_ERASE2;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+}
+
+static int
+bank_erase_poll(flash_info_t *info, int sect)
+{
+ bank_addr_t addrw, saddrw, eaddrw;
+ int sectdone, haderr;
+
+ saddrw = (bank_addr_t)info->start[sect];
+ eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
+
+ sectdone = 1;
+ haderr = 0;
+
+ for (addrw = saddrw; addrw < eaddrw; addrw++) {
+ bank_word_t stat = *addrw;
+
+#ifdef FLASH_DEBUG
+ printf(" checking status at addr "
+ "0x%08x [0x%08x]\n",
+ (unsigned long)addrw, stat);
+#endif
+ if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY)
+ sectdone = 0;
+ else if ((stat & BANK_STAT_ERR) != 0) {
+ printf(" failed on sector %d "
+ "(stat = 0x%08x) at "
+ "address 0x%p\n",
+ sect, stat, addrw);
+ *addrw = BANK_CMD_CLR_STAT;
+ haderr = 1;
+ }
+ }
+
+ if (haderr)
+ return (-1);
+ else
+ return (sectdone);
+}
+
+int
+write_word_intel(bank_addr_t addr, bank_word_t value)
+{
+ bank_word_t stat;
+ ulong start;
+ int flag, retval;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = BANK_CMD_PROG;
+
+ *addr = value;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ retval = 0;
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ do {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ retval = 1;
+ goto done;
+ }
+ stat = *addr;
+ } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
+
+ if ((stat & BANK_STAT_ERR) != 0) {
+ printf("flash program failed (stat = 0x%08lx) "
+ "at address 0x%08lx\n", (ulong)stat, (ulong)addr);
+ *addr = BANK_CMD_CLR_STAT;
+ retval = 3;
+ }
+
+done:
+ /* reset to read mode */
+ *addr = BANK_CMD_RST;
+
+ return (retval);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase_intel(flash_info_t *info, int s_first, int s_last)
+{
+ int prot, sect, haderr;
+ ulong start, now, last;
+
+#ifdef FLASH_DEBUG
+ printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
+ " Bank # %d: ", s_last - s_first + 1, s_first, s_last,
+ (info - flash_info) + 1);
+ flash_print_info(info);
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sector%s will not be erased!\n",
+ prot, (prot > 1 ? "s" : ""));
+ }
+
+ start = get_timer (0);
+ last = 0;
+ haderr = 0;
+
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ ulong estart;
+ int sectdone;
+
+ bank_erase_init(info, sect);
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ estart = get_timer(start);
+
+ do {
+ now = get_timer(start);
+
+ if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout (sect %d)\n", sect);
+ haderr = 1;
+ break;
+ }
+
+#ifndef FLASH_DEBUG
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+#endif
+
+ sectdone = bank_erase_poll(info, sect);
+
+ if (sectdone < 0) {
+ haderr = 1;
+ break;
+ }
+
+ } while (!sectdone);
+
+ if (haderr)
+ break;
+ }
+ }
+
+ if (haderr > 0)
+ printf (" failed\n");
+ else
+ printf (" done\n");
+
+ /* reset to read mode */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ bank_reset(info, sect);
+ }
+ }
+ return haderr;
+}
diff --git a/board/fads/flash.c b/board/fads/flash.c
new file mode 100644
index 0000000000..50b496ed97
--- /dev/null
+++ b/board/fads/flash.c
@@ -0,0 +1,624 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long total_size;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+ {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ total_size = 0;
+ size_b0 = 0xffffffff;
+
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+ {
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + total_size), &flash_info[i]);
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN)
+ {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", i, size_b1, size_b1>>20);
+ }
+
+ /* Is this really needed ? - LP */
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: Bank %d (0x%08lx = %ld MB) > Bank %d (0x%08lx = %ld MB)\n",
+ i, size_b1, size_b1>>20, i-1, size_b0, size_b0>>20);
+ goto out_error;
+ }
+ size_b0 = size_b1;
+ total_size += size_b1;
+ }
+
+ /* Compute the Address Mask */
+ for (i=0; (total_size >> i) != 0; ++i) {};
+ i--;
+
+ if (total_size != (1 << i)) {
+ printf ("## WARNING: Total FLASH size (0x%08lx = %ld MB) is not a power of 2\n",
+ total_size, total_size>>20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = ((((unsigned long)~1) << i) & OR_AM_MSK) | CFG_OR_TIMING_FLASH;
+ memctl->memc_br0 = CFG_BR0_PRELIM;
+
+ total_size = 0;
+
+ for (i=0; i < CFG_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i)
+ {
+ /* Re-do sizing to get full correct info */
+ /* Why ? - LP */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + total_size), &flash_info[i]);
+
+ /* This is done by flash_get_size - LP */
+ /* flash_get_offsets (CFG_FLASH_BASE + total_size, &flash_info[i]); */
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[i]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+ &flash_info[i]);
+#endif
+
+ total_size += size_b1;
+ }
+
+ return (total_size);
+
+out_error:
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+ {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
+ /* set sector offsets for uniform sector type */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00040000);
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK)
+ {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK)
+ {
+ case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+
+ for (i=0; i<info->sector_count; ++i)
+ {
+ if ((i % 5) == 0)
+ {
+ printf ("\n ");
+ }
+
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+#if 0
+ ulong base = (ulong)addr;
+#endif
+ uchar value;
+
+ /* Write auto select command: read Manufacturer ID */
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+#endif
+
+ value = addr[0];
+
+ switch (value + (value << 16))
+ {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value)
+ {
+ case AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+#if 0
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+#else
+ flash_get_offsets ((ulong)addr, info);
+#endif
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN)
+ {
+ addr = (volatile unsigned long *)info->start[0];
+#if 0
+ *addr = 0x00F000F0; /* reset bank */
+#else
+ *addr = 0xF0F0F0F0; /* reset bank */
+#endif
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x80808080;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+#endif
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+#if 0
+ addr[0] = 0x00300030;
+#else
+ addr[0] = 0x30303030;
+#endif
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+#if 0
+ while ((addr[0] & 0x00800080) != 0x00800080)
+#else
+ while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
+#endif
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+#if 0
+ addr[0] = 0x00F000F0; /* reset bank */
+#else
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+#endif
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0xA0A0A0A0;
+#endif
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+#if 0
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
+#else
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
+#endif
+ {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/fads/lamp.c b/board/fads/lamp.c
new file mode 100644
index 0000000000..b12147740e
--- /dev/null
+++ b/board/fads/lamp.c
@@ -0,0 +1,42 @@
+#include <config.h>
+#include <common.h>
+
+void
+signal_delay(unsigned int n)
+{
+ while (n--);
+}
+
+void
+signal_on(void)
+{
+ *((volatile uint *)BCSR4) &= ~(1<<(31-3)); /* led on */
+}
+
+void
+signal_off(void)
+{
+ *((volatile uint *)BCSR4) |= (1<<(31-3)); /* led off */
+}
+
+void
+slow_blink(unsigned int n)
+{
+ while (n--) {
+ signal_on();
+ signal_delay(0x00400000);
+ signal_off();
+ signal_delay(0x00400000);
+ }
+}
+
+void
+fast_blink(unsigned int n)
+{
+ while (n--) {
+ signal_on();
+ signal_delay(0x00100000);
+ signal_off();
+ signal_delay(0x00100000);
+ }
+}
diff --git a/board/genietv/flash.c b/board/genietv/flash.c
new file mode 100644
index 0000000000..2314a53e73
--- /dev/null
+++ b/board/genietv/flash.c
@@ -0,0 +1,470 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ /* Detect size */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ /* Setup offsets */
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* Monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ size_b1 = 0 ;
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ * Fix this to support variable sector sizes
+*/
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
+ /* set sector offsets for bottom boot block type */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ {
+ puts ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK)
+ {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK)
+ {
+ case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ if (info->size >> 20) {
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20,
+ info->sector_count);
+ } else {
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10,
+ info->sector_count);
+ }
+
+ puts (" Sector Start Addresses:");
+
+ for (i=0; i<info->sector_count; ++i)
+ {
+ if ((i % 5) == 0)
+ {
+ puts ("\n ");
+ }
+
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+
+ putc ('\n');
+ return;
+}
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ volatile unsigned char *caddr;
+ char value;
+
+ caddr = (volatile unsigned char *)addr ;
+
+ /* Write auto select command: read Manufacturer ID */
+
+#if 0
+ printf("Base address is: %08x\n", caddr);
+#endif
+
+ caddr[0x0555] = 0xAA;
+ caddr[0x02AA] = 0x55;
+ caddr[0x0555] = 0x90;
+
+ value = caddr[0];
+
+#if 0
+ printf("Manufact ID: %02x\n", value);
+#endif
+ switch (value)
+ {
+ case 0x01:
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ value = caddr[1]; /* device ID */
+#if 0
+ printf("Device ID: %02x\n", value);
+#endif
+ switch (value)
+ {
+ case AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 512Kb */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ flash_get_offsets ((ulong)addr, &flash_info[0]);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ caddr = (volatile unsigned char *)(info->start[i]);
+ info->protect[i] = caddr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN)
+ {
+ caddr = (volatile unsigned char *)info->start[0];
+ *caddr = 0xF0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0x80;
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (volatile unsigned char *)(info->start[sect]);
+ addr[0] = 0x30;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile unsigned char *)(info->start[l_sect]);
+
+ while ((addr[0] & 0xFF) != 0xFF)
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned char *)info->start[0];
+
+ addr[0] = 0xF0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile unsigned char *addr = (volatile unsigned char*)(info->start[0]),
+ *cdest,*cdata;
+ ulong start;
+ int flag, count = 4 ;
+
+ cdest = (volatile unsigned char *)dest ;
+ cdata = (volatile unsigned char *)&data ;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+ while(count--)
+ {
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0xA0;
+
+ *cdest = *cdata;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*cdest ^ *cdata) & 0x80)
+ {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+ cdata++ ;
+ cdest++ ;
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/gth/ee_access.c b/board/gth/ee_access.c
new file mode 100644
index 0000000000..716c90ed62
--- /dev/null
+++ b/board/gth/ee_access.c
@@ -0,0 +1,335 @@
+/* Module for handling DALLAS DS2438, smart battery monitor
+ Chip can store up to 40 bytes of user data in EEPROM,
+ perform temp, voltage and current measurements.
+ Chip also contains a unique serial number.
+
+ Always read/write LSb first
+
+ For documentaion, see data sheet for DS2438, 2438.pdf
+
+ By Thomas.Lange@corelatus.com 001025 */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+
+#include <../board/gth/ee_dev.h>
+
+/* We dont have kernel functions */
+#define printk printf
+#define KERN_DEBUG
+#define KERN_ERR
+#define EIO 1
+
+static int Debug = 0;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/*
+ * lookup table ripped from DS app note 17, understanding and using
+ * cyclic redundancy checks...
+ */
+
+static u8 crc_lookup[256] = {
+ 0, 94, 188, 226, 97, 63, 221, 131,
+ 194, 156, 126, 32, 163, 253, 31, 65,
+ 157, 195, 33, 127, 252, 162, 64, 30,
+ 95, 1, 227, 189, 62, 96, 130, 220,
+ 35, 125, 159, 193, 66, 28, 254, 160,
+ 225, 191, 93, 3, 128, 222, 60, 98,
+ 190, 224, 2, 92, 223, 129, 99, 61,
+ 124, 34, 192, 158, 29, 67, 161, 255,
+ 70, 24, 250, 164, 39, 121, 155, 197,
+ 132, 218, 56, 102, 229, 187, 89, 7,
+ 219, 133, 103, 57, 186, 228, 6, 88,
+ 25, 71, 165, 251, 120, 38, 196, 154,
+ 101, 59, 217, 135, 4, 90, 184, 230,
+ 167, 249, 27, 69, 198, 152, 122, 36,
+ 248, 166, 68, 26, 153, 199, 37, 123,
+ 58, 100, 134, 216, 91, 5, 231, 185,
+ 140, 210, 48, 110, 237, 179, 81, 15,
+ 78, 16, 242, 172, 47, 113, 147, 205,
+ 17, 79, 173, 243, 112, 46, 204, 146,
+ 211, 141, 111, 49, 178, 236, 14, 80,
+ 175, 241, 19, 77, 206, 144, 114, 44,
+ 109, 51, 209, 143, 12, 82, 176, 238,
+ 50, 108, 142, 208, 83, 13, 239, 177,
+ 240, 174, 76, 18, 145, 207, 45, 115,
+ 202, 148, 118, 40, 171, 245, 23, 73,
+ 8, 86, 180, 234, 105, 55, 213, 139,
+ 87, 9, 235, 181, 54, 104, 138, 212,
+ 149, 203, 41, 119, 244, 170, 72, 22,
+ 233, 183, 85, 11, 136, 214, 52, 106,
+ 43, 117, 151, 201, 74, 20, 246, 168,
+ 116, 42, 200, 150, 21, 75, 169, 247,
+ 182, 232, 10, 84, 215, 137, 107, 53
+};
+
+static u8 make_new_crc( u8 Old_crc, u8 New_value ){
+ /* Compute a new checksum with new byte, using previous checksum as input
+ See DS app note 17, understanding and using cyclic redundancy checks...
+ Also see DS2438, page 11 */
+ return( crc_lookup[Old_crc ^ New_value ]);
+}
+
+int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
+ /* Check if the checksum for this buffer is correct */
+ u8 Curr_crc=0;
+ int i;
+ u8 *Curr_byte = Buffer;
+
+ for(i=0;i<Len;i++){
+ Curr_crc = make_new_crc( Curr_crc, *Curr_byte);
+ Curr_byte++;
+ }
+ E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
+
+ if(Curr_crc == Crc){
+ /* Good */
+ return(TRUE);
+ }
+ printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n",
+ Curr_crc, Crc);
+ return(FALSE);
+}
+
+static void
+set_idle(void){
+ /* Send idle and keep start time
+ Continous 1 is idle */
+ WRITE_PORT(1);
+}
+
+static int
+do_reset(void){
+ /* Release reset and verify that chip responds with presence pulse */
+ int Retries = 0;
+ while(Retries<5){
+ udelay(RESET_LOW_TIME);
+
+ /* Send reset */
+ WRITE_PORT(0);
+ udelay(RESET_LOW_TIME);
+
+ /* Release reset */
+ WRITE_PORT(1);
+
+ /* Wait for EEPROM to drive output */
+ udelay(PRESENCE_TIMEOUT);
+ if(!READ_PORT){
+ /* Ok, EEPROM is driving a 0 */
+ E_DEBUG("Presence detected\n");
+ if(Retries){
+ E_DEBUG("Retries %d\n",Retries);
+ }
+ /* Make sure chip releases pin */
+ udelay(PRESENCE_LOW_TIME);
+ return 0;
+ }
+ Retries++;
+ }
+
+ printk(KERN_ERR"EEPROM did not respond when releasing reset\n");
+
+ /* Make sure chip releases pin */
+ udelay(PRESENCE_LOW_TIME);
+
+ /* Set to idle again */
+ set_idle();
+
+ return(-EIO);
+}
+
+static u8
+read_byte(void){
+ /* Read a single byte from EEPROM
+ Read LSb first */
+ int i;
+ int Value;
+ u8 Result=0;
+#ifndef CFG_IMMR
+ u32 Flags;
+#endif
+
+ E_DEBUG("Reading byte\n");
+
+ for(i=0;i<8;i++){
+ /* Small delay between pulses */
+ udelay(1);
+
+#ifndef CFG_IMMR
+ /* Disable irq */
+ save_flags(Flags);
+ cli();
+#endif
+
+ /* Pull down pin short time to start read
+ See page 26 in data sheet */
+
+ WRITE_PORT(0);
+ udelay(READ_LOW);
+ WRITE_PORT(1);
+
+ /* Wait for chip to drive pin */
+ udelay(READ_TIMEOUT);
+
+ Value = READ_PORT;
+ if(Value)
+ Value=1;
+
+#ifndef CFG_IMMR
+ /* Enable irq */
+ restore_flags(Flags);
+#endif
+
+ /* Wait for chip to release pin */
+ udelay(TOTAL_READ_LOW-READ_TIMEOUT);
+
+ /* LSb first */
+ Result|=Value<<i;
+ }
+
+ E_DEBUG("Read byte 0x%x\n",Result);
+
+ return(Result);
+}
+
+static void
+write_byte(u8 Byte){
+ /* Write a single byte to EEPROM
+ Write LSb first */
+ int i;
+ int Value;
+#ifndef CFG_IMMR
+ u32 Flags;
+#endif
+
+ E_DEBUG("Writing byte 0x%x\n",Byte);
+
+ for(i=0;i<8;i++){
+ /* Small delay between pulses */
+ udelay(1);
+ Value = Byte&1;
+
+#ifndef CFG_IMMR
+ /* Disable irq */
+ save_flags(Flags);
+ cli();
+#endif
+
+ /* Pull down pin short time for a 1, long time for a 0
+ See page 26 in data sheet */
+
+ WRITE_PORT(0);
+ if(Value){
+ /* Write a 1 */
+ udelay(WRITE_1_LOW);
+ }
+ else{
+ /* Write a 0 */
+ udelay(WRITE_0_LOW);
+ }
+
+ WRITE_PORT(1);
+
+#ifndef CFG_IMMR
+ /* Enable irq */
+ restore_flags(Flags);
+#endif
+
+ if(Value)
+ /* Wait for chip to read the 1 */
+ udelay(TOTAL_WRITE_LOW-WRITE_1_LOW);
+ Byte>>=1;
+ }
+}
+
+int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
+ /* Execute this command string, including
+ giving reset and setting to idle after command
+ if Rx_len is set, we read out data from EEPROM */
+ int i;
+
+ E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
+
+ if(do_reset()){
+ /* Failed! */
+ return(-EIO);
+ }
+
+ if(Send_skip)
+ /* Always send SKIP_ROM first to tell chip we are sending a command,
+ except when we read out rom data for chip */
+ write_byte(SKIP_ROM);
+
+ /* Always have Tx data */
+ for(i=0;i<Tx_len;i++){
+ write_byte(Tx[i]);
+ }
+
+ if(Rx_len){
+ for(i=0;i<Rx_len;i++){
+ Rx[i]=read_byte();
+ }
+ }
+
+ set_idle();
+
+ E_DEBUG("Command done\n");
+
+ return(0);
+}
+
+int ee_init_data(void){
+ int i;
+ u8 Tx[10];
+ int tmp;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+
+ while(0){
+ tmp = 1-tmp;
+ if(tmp)
+ immap->im_ioport.iop_padat &= ~PA_FRONT_LED;
+ else
+ immap->im_ioport.iop_padat |= PA_FRONT_LED;
+ udelay(1);
+ }
+
+ /* Set port to open drain to be able to read data from
+ port without setting it to input */
+ PORT_B_PAR &= ~PB_EEPROM;
+ PORT_B_ODR |= PB_EEPROM;
+ SET_PORT_B_OUTPUT(PB_EEPROM);
+
+ /* Set idle mode */
+ set_idle();
+
+ /* Copy all User EEPROM data to scratchpad */
+ for(i=0;i<USER_PAGES;i++){
+ Tx[0]=RECALL_MEMORY;
+ Tx[1]=EE_USER_PAGE_0+i;
+ if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO);
+ }
+
+ /* Make sure chip doesnt store measurements in NVRAM */
+ Tx[0]=WRITE_SCRATCHPAD;
+ Tx[1]=0; /* Page */
+ Tx[2]=9;
+ if(ee_do_command(Tx,3,NULL,0,TRUE)) return(-EIO);
+
+ Tx[0]=COPY_SCRATCHPAD;
+ if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO);
+
+ /* FIXME check status bit instead
+ Could take 10 ms to store in EEPROM */
+ for(i=0;i<10;i++){
+ udelay(1000);
+ }
+
+ return(0);
+}
diff --git a/board/gth/flash.c b/board/gth/flash.c
new file mode 100644
index 0000000000..562a349924
--- /dev/null
+++ b/board/gth/flash.c
@@ -0,0 +1,649 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /*printf("faking");*/
+
+ return(0x1fffff);
+
+ /* Init: no FLASHes known */
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+ {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN)
+ {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+#if 0
+ if (FLASH_BASE1_PRELIM != 0x0) {
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,size_b0, size_b0<<20);
+
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+ } else {
+#endif
+ size_b1 = 0;
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR0_PRELIM;
+ memctl->memc_br0 = CFG_BR0_PRELIM;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1)
+ {
+ /* memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM; */
+
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+ }
+ else
+ {
+/* memctl->memc_or1 = CFG_OR1_PRELIM;
+ FIXME memctl->memc_br1 = CFG_BR1_PRELIM; */
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start adress table */
+ if (info->flash_id & FLASH_BTYPE)
+ {
+ /* set sector offsets for bottom boot block type */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ info->start[i] = base + (i * 0x00040000);
+ }
+ }
+ else
+ {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ for (; i >= 0; i--)
+ {
+ info->start[i] = base + i * 0x00040000;
+ }
+ }
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+
+#if 0
+ case FLASH_AM040B:
+ printf ("AM29F040B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM040T:
+ printf ("AM29F040T (4 Mbit, top boot sect)\n");
+ break;
+#endif
+ case FLASH_AM400B:
+ printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B:
+ printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20,
+ info->sector_count);
+
+ printf (" Sector Start Addresses:");
+
+ for (i=0; i<info->sector_count; ++i)
+ {
+ if ((i % 5) == 0)
+ {
+ printf ("\n ");
+ }
+
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+#if 0
+ ulong base = (ulong)addr;
+#endif
+ uchar value;
+
+ /* Write auto select command: read Manufacturer ID */
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+#endif
+
+ value = addr[0];
+
+ switch (value)
+ {
+ case AMD_MANUFACT:case 0x01:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value)
+ {
+#if 0
+ case AMD_ID_F040B:
+ info->flash_id += FLASH_AM040B;
+ info->sector_count = 8;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+#endif
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+#if 0
+ /* set up sector start adress table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+#else
+ flash_get_offsets ((ulong)addr, &flash_info[0]);
+#endif
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN)
+ {
+ addr = (volatile unsigned long *)info->start[0];
+#if 0
+ *addr = 0x00F000F0; /* reset bank */
+#else
+ *addr = 0xF0F0F0F0; /* reset bank */
+#endif
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x80808080;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+#endif
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+#if 0
+ addr[0] = 0x00300030;
+#else
+ addr[0] = 0x30303030;
+#endif
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+#if 0
+ while ((addr[0] & 0x00800080) != 0x00800080)
+#else
+ while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
+#endif
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+#if 0
+ addr[0] = 0x00F000F0; /* reset bank */
+#else
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+#endif
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0xA0A0A0A0;
+#endif
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+#if 0
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
+#else
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
+#endif
+ {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/hermes/flash.c b/board/hermes/flash.c
new file mode 100644
index 0000000000..bb7635ecfe
--- /dev/null
+++ b/board/hermes/flash.c
@@ -0,0 +1,460 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_byte (flash_info_t *info, ulong dest, uchar data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) |
+ (memctl->memc_br0 & ~(BR_BA_MSK));
+
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ flash_info[0].size = size;
+
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ uchar value;
+ vu_char *caddr = (vu_char *)addr;
+ ulong base = (ulong)addr;
+
+
+ /* Write auto select command: read Manufacturer ID */
+ caddr[0x0AAA] = 0xAA;
+ caddr[0x0555] = 0x55;
+ caddr[0x0AAA] = 0x90;
+
+ value = caddr[0];
+ switch (value) {
+ case (AMD_MANUFACT & 0xFF):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FUJ_MANUFACT & 0xFF):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = caddr[2]; /* device ID */
+
+ switch (value) {
+ case (AMD_ID_LV400T & 0xFF):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ case (AMD_ID_LV400B & 0xFF):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ case (AMD_ID_LV800T & 0xFF):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV800B & 0xFF):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV160T & 0xFF):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV160B & 0xFF):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+#if 0 /* enable when device IDs are available */
+ case (AMD_ID_LV320T & 0xFF):
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV320B & 0xFF):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection: D0 = 1 if protected */
+ caddr = (volatile unsigned char *)(info->start[i]);
+ info->protect[i] = caddr[4] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ caddr = (vu_char *)info->start[0];
+
+ *caddr = 0xF0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_char *addr = (vu_char*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0AAA] = 0xAA;
+ addr[0x0555] = 0x55;
+ addr[0x0AAA] = 0x80;
+ addr[0x0AAA] = 0xAA;
+ addr[0x0555] = 0x55;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_char*)(info->start[sect]);
+ addr[0] = 0x30;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_char*)(info->start[l_sect]);
+ while ((addr[0] & 0x80) != 0x80) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (vu_char *)info->start[0];
+ addr[0] = 0xF0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ int rc;
+
+ while (cnt > 0) {
+ if ((rc = write_byte(info, addr++, *src++)) != 0) {
+ return (rc);
+ }
+ --cnt;
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_byte (flash_info_t *info, ulong dest, uchar data)
+{
+ vu_char *addr = (vu_char*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_char *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0AAA] = 0xAA;
+ addr[0x0555] = 0x55;
+ addr[0x0AAA] = 0xA0;
+
+ *((vu_char *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/hymod/eeprom.c b/board/hymod/eeprom.c
new file mode 100644
index 0000000000..9d506467c2
--- /dev/null
+++ b/board/hymod/eeprom.c
@@ -0,0 +1,597 @@
+/*
+ * (C) Copyright 2001
+ * Murray Jensen, CSIRO Manufacturing Science and Technology,
+ * <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+
+/* imports from fetch.c */
+extern int fetch_and_parse(bd_t *, char *, ulong, int (*)(uchar *, uchar *));
+
+int
+eeprom_load(unsigned offset, hymod_eeprom_t *ep)
+{
+ uchar data[HYMOD_EEPROM_SIZE], *dp, *edp;
+ hymod_eehdr_t *hp;
+ ulong len, crc;
+
+ memset(ep, 0, sizeof *ep);
+ memset(data, 0, HYMOD_EEPROM_SIZE);
+ crc = 0;
+
+ hp = (hymod_eehdr_t *)data;
+ eeprom_read(CFG_DEF_EEPROM_ADDR, offset, (uchar *)hp, sizeof (*hp));
+ offset += sizeof (*hp);
+
+ if (hp->id != HYMOD_EEPROM_ID || hp->ver > HYMOD_EEPROM_VER ||
+ (len = hp->len) > HYMOD_EEPROM_MAXLEN)
+ return (0);
+
+ dp = (uchar *)(hp + 1); edp = dp + len;
+ eeprom_read(CFG_DEF_EEPROM_ADDR, offset, dp, len);
+ offset += len;
+
+ eeprom_read(CFG_DEF_EEPROM_ADDR, offset, (uchar *)&crc, sizeof (ulong));
+
+ if (crc32(0, data, edp - data) != crc)
+ return (0);
+
+ ep->ver = hp->ver;
+
+ for (;;) {
+ hymod_eerec_t *rp = (hymod_eerec_t *)dp;
+ ulong rtyp;
+ uchar rlen, *rdat;
+ uint rsiz;
+
+ if (rp->small.topbit == 0) {
+ rtyp = rp->small.type;
+ rlen = rp->small.len;
+ rdat = rp->small.data;
+ rsiz = offsetof(hymod_eerec_t, small.data) + rlen;
+ }
+ else if (rp->medium.nxtbit == 0) {
+ rtyp = rp->medium.type;
+ rlen = rp->medium.len;
+ rdat = rp->medium.data;
+ rsiz = offsetof(hymod_eerec_t, medium.data) + rlen;
+ }
+ else {
+ rtyp = rp->large.type;
+ rlen = rp->large.len;
+ rdat = rp->large.data;
+ rsiz = offsetof(hymod_eerec_t, large.data) + rlen;
+ }
+
+ if (rtyp == 0)
+ break;
+
+ dp += rsiz;
+ if (dp > edp) /* error? */
+ break;
+
+ switch (rtyp) {
+
+ case HYMOD_EEREC_SERNO: /* serial number */
+ if (rlen == sizeof (ulong))
+ memcpy(&ep->serno, rdat, sizeof (ulong));
+ break;
+
+ case HYMOD_EEREC_DATE: /* date */
+ if (rlen == sizeof (hymod_date_t))
+ memcpy(&ep->date, rdat, sizeof (hymod_date_t));
+ break;
+
+ case HYMOD_EEREC_BATCH: /* batch */
+ if (rlen <= HYMOD_MAX_BATCH)
+ memcpy(ep->batch, rdat, ep->batchlen = rlen);
+ break;
+
+ case HYMOD_EEREC_TYPE: /* board type */
+ if (rlen == 1)
+ ep->bdtype = *rdat;
+ break;
+
+ case HYMOD_EEREC_REV: /* board revision */
+ if (rlen == 1)
+ ep->bdrev = *rdat;
+ break;
+
+ case HYMOD_EEREC_SDRAM: /* sdram size(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_SDRAM) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->sdramsz[i] = rdat[i];
+ ep->nsdram = rlen;
+ }
+ break;
+
+ case HYMOD_EEREC_FLASH: /* flash size(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_FLASH) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->flashsz[i] = rdat[i];
+ ep->nflash = rlen;
+ }
+ break;
+
+ case HYMOD_EEREC_ZBT: /* zbt ram size(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_ZBT) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->zbtsz[i] = rdat[i];
+ ep->nzbt = rlen;
+ }
+ break;
+
+ case HYMOD_EEREC_XLXTYP: /* xilinx fpga type(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->xlx[i].type = rdat[i];
+ ep->nxlx = rlen;
+ }
+ break;
+
+ case HYMOD_EEREC_XLXSPD: /* xilinx fpga speed(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->xlx[i].speed = rdat[i];
+ }
+ break;
+
+ case HYMOD_EEREC_XLXTMP: /* xilinx fpga temperature(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->xlx[i].temp = rdat[i];
+ }
+ break;
+
+ case HYMOD_EEREC_XLXGRD: /* xilinx fpga grade(s) */
+ if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+ int i;
+
+ for (i = 0; i < rlen; i++)
+ ep->xlx[i].grade = rdat[i];
+ }
+ break;
+
+ case HYMOD_EEREC_CPUTYP: /* CPU type */
+ if (rlen == 1)
+ ep->mpc.type = *rdat;
+ break;
+
+ case HYMOD_EEREC_CPUSPD: /* CPU speed */
+ if (rlen == 1)
+ ep->mpc.cpuspd = *rdat;
+ break;
+
+ case HYMOD_EEREC_CPMSPD: /* CPM speed */
+ if (rlen == 1)
+ ep->mpc.cpmspd = *rdat;
+ break;
+
+ case HYMOD_EEREC_BUSSPD: /* bus speed */
+ if (rlen == 1)
+ ep->mpc.busspd = *rdat;
+ break;
+
+ case HYMOD_EEREC_HSTYPE: /* high-speed serial chip type */
+ if (rlen == 1)
+ ep->hss.type = *rdat;
+ break;
+
+ case HYMOD_EEREC_HSCHIN: /* high-speed serial input channels */
+ if (rlen == 1)
+ ep->hss.nchin = *rdat;
+ break;
+
+ case HYMOD_EEREC_HSCHOUT: /* high-speed serial output channels */
+ if (rlen == 1)
+ ep->hss.nchout = *rdat;
+ break;
+
+ default: /* ignore */
+ break;
+ }
+ }
+
+ return (1);
+}
+
+/* maps an ascii "name=value" into a binary eeprom data record */
+typedef
+ struct _eerec_map {
+ char *name;
+ uint type;
+ uchar *(*handler)(struct _eerec_map *, uchar *, uchar *, uchar *);
+ uint length;
+ uint maxlen;
+ }
+eerec_map_t;
+
+static uchar *
+uint_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+{
+ uchar *eval;
+ union {
+ uchar cval[4];
+ ushort sval[2];
+ ulong lval;
+ } rdata;
+
+ rdata.lval = simple_strtol(value, (char **)&eval, 10);
+
+ if (eval == value || *eval != '\0') {
+ printf("%s record (%s) is not a valid uint\n", rp->name, value);
+ return (NULL);
+ }
+
+ if (dp + 2 + rp->length > edp) {
+ printf("can't fit %s record into eeprom\n", rp->name);
+ return (NULL);
+ }
+
+ *dp++ = rp->type;
+ *dp++ = rp->length;
+
+ switch (rp->length) {
+
+ case 1:
+ if (rdata.lval >= 256) {
+ printf("%s record value (%lu) out of range (0-255)\n",
+ rp->name, rdata.lval);
+ return (NULL);
+ }
+ *dp++ = rdata.cval[3];
+ break;
+
+ case 2:
+ if (rdata.lval >= 65536) {
+ printf("%s record value (%lu) out of range (0-65535)\n",
+ rp->name, rdata.lval);
+ return (NULL);
+ }
+ memcpy(dp, &rdata.sval[1], 2);
+ dp += 2;
+ break;
+
+ case 4:
+ memcpy(dp, &rdata.lval, 4);
+ dp += 4;
+ break;
+
+ default:
+ printf("huh? rp->length not 1, 2 or 4! (%d)\n", rp->length);
+ return (NULL);
+ }
+
+ return (dp);
+}
+
+static uchar *
+date_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+{
+ hymod_date_t date;
+ uchar *p = value, *ep;
+
+ date.year = simple_strtol(p, (char **)&ep, 10);
+ if (ep == p || *ep++ != '-') {
+bad_date:
+ printf("%s record (%s) is not a valid date\n", rp->name, value);
+ return (NULL);
+ }
+
+ date.month = simple_strtol(p = ep, (char **)&ep, 10);
+ if (ep == p || *ep++ != '-' || date.month == 0 || date.month > 12)
+ goto bad_date;
+
+ date.day = simple_strtol(p = ep, (char **)&ep, 10);
+ if (ep == p || *ep != '\0' || date.day == 0 || date.day > 31)
+ goto bad_date;
+
+ if (dp + 2 + sizeof (hymod_date_t) > edp) {
+ printf("can't fit %s record into eeprom\n", rp->name);
+ return (NULL);
+ }
+
+ *dp++ = rp->type;
+ *dp++ = sizeof (hymod_date_t);
+ memcpy(dp, &date, sizeof (hymod_date_t));
+ dp += sizeof (hymod_date_t);
+
+ return (dp);
+}
+
+static uchar *
+string_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+{
+ uint len;
+
+ if ((len = strlen(value)) > rp->maxlen) {
+ printf("%s record (%s) string is too long (%d>%d)\n",
+ rp->name, value, len, rp->maxlen);
+ return (NULL);
+ }
+
+ if (dp + 2 + len > edp) {
+ printf("can't fit %s record into eeprom\n", rp->name);
+ return (NULL);
+ }
+
+ *dp++ = rp->type;
+ *dp++ = len;
+ memcpy(dp, value, len);
+ dp += len;
+
+ return (dp);
+}
+
+static uchar *
+bytes_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+{
+ uchar bytes[HYMOD_MAX_BYTES], nbytes = 0;
+ uchar *p = value, *ep;
+
+ for (;;) {
+
+ if (nbytes >= HYMOD_MAX_BYTES) {
+ printf("%s record (%s) byte array too long\n", rp->name, value);
+ return (NULL);
+ }
+
+ bytes[nbytes++] = simple_strtol(p, (char **)&ep, 10);
+
+ if (ep == p || (*ep != '\0' && *ep != ',')) {
+ printf("%s record (%s) byte array has invalid uint\n",
+ rp->name, value);
+ return (NULL);
+ }
+
+ if (*ep++ == '\0')
+ break;
+
+ p = ep;
+ }
+
+ if (dp + 2 + nbytes > edp) {
+ printf("can't fit %s record into eeprom\n", rp->name);
+ return (NULL);
+ }
+
+ *dp++ = rp->type;
+ *dp++ = nbytes;
+ memcpy(dp, bytes, nbytes);
+ dp += nbytes;
+
+ return (dp);
+}
+
+static eerec_map_t eerec_map[] = {
+ /* name type handler len max */
+ { "serno", HYMOD_EEREC_SERNO, uint_handler, 4, 0 },
+ { "date", HYMOD_EEREC_DATE, date_handler, 4, 0 },
+ { "batch", HYMOD_EEREC_BATCH, string_handler, 0, HYMOD_MAX_BATCH },
+ { "type", HYMOD_EEREC_TYPE, uint_handler, 1, 0 },
+ { "rev", HYMOD_EEREC_REV, uint_handler, 1, 0 },
+ { "sdram", HYMOD_EEREC_SDRAM, bytes_handler, 0, HYMOD_MAX_SDRAM },
+ { "flash", HYMOD_EEREC_FLASH, bytes_handler, 0, HYMOD_MAX_FLASH },
+ { "zbt", HYMOD_EEREC_ZBT, bytes_handler, 0, HYMOD_MAX_ZBT },
+ { "xlxtyp", HYMOD_EEREC_XLXTYP, bytes_handler, 0, HYMOD_MAX_XLX },
+ { "xlxspd", HYMOD_EEREC_XLXSPD, bytes_handler, 0, HYMOD_MAX_XLX },
+ { "xlxtmp", HYMOD_EEREC_XLXTMP, bytes_handler, 0, HYMOD_MAX_XLX },
+ { "xlxgrd", HYMOD_EEREC_XLXGRD, bytes_handler, 0, HYMOD_MAX_XLX },
+ { "cputyp", HYMOD_EEREC_CPUTYP, uint_handler, 1, 0 },
+ { "cpuspd", HYMOD_EEREC_CPUSPD, uint_handler, 1, 0 },
+ { "cpmspd", HYMOD_EEREC_CPMSPD, uint_handler, 1, 0 },
+ { "busspd", HYMOD_EEREC_BUSSPD, uint_handler, 1, 0 },
+ { "hstype", HYMOD_EEREC_HSTYPE, uint_handler, 1, 0 },
+ { "hschin", HYMOD_EEREC_HSCHIN, uint_handler, 1, 0 },
+ { "hschout", HYMOD_EEREC_HSCHOUT, uint_handler, 1, 0 },
+};
+
+static int neerecs = sizeof eerec_map / sizeof eerec_map[0];
+
+static uchar data[HYMOD_EEPROM_SIZE], *sdp, *dp, *edp;
+
+static int
+eeprom_fetch_callback(uchar *name, uchar *value)
+{
+ eerec_map_t *rp;
+
+ for (rp = eerec_map; rp < &eerec_map[neerecs]; rp++)
+ if (strcmp(name, rp->name) == 0)
+ break;
+
+ if (rp >= &eerec_map[neerecs])
+ return (0);
+
+ if ((dp = (*rp->handler)(rp, value, dp, edp)) == NULL)
+ return (0);
+
+ return (1);
+}
+
+int
+eeprom_fetch(unsigned offset, bd_t *bd, char *filename, ulong addr)
+{
+ hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
+ ulong crc;
+
+ hp->id = HYMOD_EEPROM_ID;
+ hp->ver = HYMOD_EEPROM_VER;
+
+ dp = sdp = (uchar *)(hp + 1);
+ edp = dp + HYMOD_EEPROM_MAXLEN;
+
+ if (fetch_and_parse(bd, filename, addr, eeprom_fetch_callback) == 0)
+ return (0);
+
+ hp->len = dp - sdp;
+
+ crc = crc32(0, data, dp - data);
+ memcpy(dp, &crc, sizeof (ulong));
+ dp += sizeof (ulong);
+
+ eeprom_write(CFG_DEF_EEPROM_ADDR, offset, data, dp - data);
+
+ return (1);
+}
+
+static char *type_vals[] = {
+ "NONE", "IO", "CLP", "DSP", "INPUT", "ALT-INPUT", "DISPLAY"
+};
+
+static char *xlxtyp_vals[] = {
+ "NONE", "XCV300E", "XCV400E", "XCV600E"
+};
+
+static char *xlxspd_vals[] = {
+ "NONE", "6", "7", "8"
+};
+
+static char *xlxtmp_vals[] = {
+ "NONE", "COM", "IND"
+};
+
+static char *xlxgrd_vals[] = {
+ "NONE", "NORMAL", "ENGSAMP"
+};
+
+static char *cputyp_vals[] = {
+ "NONE", "MPC8260"
+};
+
+static char *clk_vals[] = {
+ "NONE", "33", "66", "100", "133", "166", "200"
+};
+
+static char *hstype_vals[] = {
+ "NONE", "AMCC-S2064A"
+};
+
+static void
+print_mem(char *l, char *s, uchar n, uchar a[])
+{
+ if (n > 0) {
+ if (n == 1)
+ printf("%s%dMB %s", s, 1 << (a[0] - 20), l);
+ else {
+ ulong t = 0;
+ int i;
+
+ for (i = 0; i < n; i++)
+ t += 1 << (a[i] - 20);
+
+ printf("%s%luMB %s (%d banks:", s, t, l, n);
+
+ for (i = 0; i < n; i++)
+ printf("%dMB%s", 1 << (a[i] - 20), (i == n - 1) ? ")" : ",");
+ }
+ }
+ else
+ printf("%sNO %s", s, l);
+}
+
+void
+eeprom_print(hymod_eeprom_t *ep)
+{
+ int i;
+
+ printf(" Hymod %s board, rev %03d\n",
+ type_vals[ep->bdtype], ep->bdrev);
+
+ printf(" serial #: %010lu, date %04d-%02d-%02d",
+ ep->serno, ep->date.year, ep->date.month, ep->date.day);
+ if (ep->batchlen > 0)
+ printf(", batch \"%.*s\"", ep->batchlen, ep->batch);
+ puts("\n");
+
+ switch (ep->bdtype) {
+
+ case HYMOD_BDTYPE_IO:
+ case HYMOD_BDTYPE_CLP:
+ case HYMOD_BDTYPE_DSP:
+ printf(" Motorola %s CPU, speeds: %s/%s/%s",
+ cputyp_vals[ep->mpc.type], clk_vals[ep->mpc.cpuspd],
+ clk_vals[ep->mpc.cpmspd], clk_vals[ep->mpc.busspd]);
+
+ print_mem("SDRAM", ", ", ep->nsdram, ep->sdramsz);
+
+ print_mem("FLASH", ", ", ep->nflash, ep->flashsz);
+
+ puts("\n");
+
+ print_mem("ZBT", " ", ep->nzbt, ep->zbtsz);
+
+ if (ep->nxlx > 0) {
+ hymod_xlx_t *xp;
+
+ if (ep->nxlx == 1) {
+ xp = &ep->xlx[0];
+ printf(", Xilinx %s FPGA (%s/%s/%s)",
+ xlxtyp_vals[xp->type], xlxspd_vals[xp->speed],
+ xlxtmp_vals[xp->temp], xlxgrd_vals[xp->grade]);
+ }
+ else {
+ printf(", %d Xilinx FPGAs (", ep->nxlx);
+ for (i = 0; i < ep->nxlx; i++) {
+ xp = &ep->xlx[i];
+ printf("%s[%s/%s/%s]%s",
+ xlxtyp_vals[xp->type], xlxspd_vals[xp->speed],
+ xlxtmp_vals[xp->temp], xlxgrd_vals[xp->grade],
+ (i == ep->nxlx - 1) ? ")" : ", ");
+ }
+ }
+ }
+ else
+ puts(", NO FPGAs");
+
+ puts("\n");
+
+ if (ep->hss.type > 0)
+ printf(" High Speed Serial: %s, %d input%s, %d output%s\n",
+ hstype_vals[ep->hss.type],
+ ep->hss.nchin, (ep->hss.nchin == 1 ? "" : "s"),
+ ep->hss.nchout, (ep->hss.nchout == 1 ? "" : "s"));
+ break;
+
+ case HYMOD_BDTYPE_INPUT:
+ case HYMOD_BDTYPE_ALTINPUT:
+ case HYMOD_BDTYPE_DISPLAY:
+ break;
+
+ default:
+ /* crap! */
+ printf(" UNKNOWN BOARD TYPE: %d\n", ep->bdtype);
+ break;
+ }
+}
diff --git a/board/hymod/flash.c b/board/hymod/flash.c
new file mode 100644
index 0000000000..ee052e3959
--- /dev/null
+++ b/board/hymod/flash.c
@@ -0,0 +1,745 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <board/hymod/flash.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+#if 0
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+#endif
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * probe for the existence of flash at bank word address "addr"
+ * 0 = yes, 1 = bad Manufacturer's Id, 2 = bad Device Id
+ */
+static int
+bank_probe_word(bank_addr_t addr)
+{
+ int retval;
+
+ /* reset the flash */
+ *addr = BANK_CMD_RST;
+
+ /* check the manufacturer id */
+ *addr = BANK_CMD_RD_ID;
+ if (*BANK_ADDR_REG_MAN(addr) != BANK_RD_ID_MAN) {
+ retval = -1;
+ goto out;
+ }
+
+ /* check the device id */
+ *addr = BANK_CMD_RD_ID;
+ if (*BANK_ADDR_REG_DEV(addr) != BANK_RD_ID_DEV) {
+ retval = -2;
+ goto out;
+ }
+
+ retval = CFG_FLASH_TYPE;
+
+out:
+ /* reset the flash again */
+ *addr = BANK_CMD_RST;
+
+ return retval;
+}
+
+/*
+ * probe for flash banks at address "base" and store info for any found
+ * into flash_info entry "fip". Must find at least one bank.
+ */
+static void
+bank_probe(flash_info_t *fip, bank_addr_t base)
+{
+ bank_addr_t addr, eaddr;
+ int nbanks;
+
+ fip->flash_id = FLASH_UNKNOWN;
+ fip->size = 0L;
+ fip->sector_count = 0;
+
+ addr = base;
+ eaddr = BANK_ADDR_BASE(addr, MAX_BANKS);
+ nbanks = 0;
+
+ while (addr < eaddr) {
+ bank_addr_t addrw, eaddrw, addrb;
+ int i, osc, nsc, curtype = -1;
+
+ addrw = addr;
+ eaddrw = BANK_ADDR_NEXT_WORD(addrw);
+
+ while (addrw < eaddrw) {
+ int thistype;
+
+#ifdef FLASH_DEBUG
+ printf(" probing for flash at addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ if ((thistype = bank_probe_word(addrw++)) < 0)
+ goto out;
+
+ if (curtype < 0)
+ curtype = thistype;
+ else {
+ if (thistype != curtype) {
+ printf("Differing flash type found!\n");
+ goto out;
+ }
+ }
+ }
+
+ if (curtype < 0)
+ goto out;
+
+ /* bank exists - append info for this bank to *fip */
+ fip->flash_id = FLASH_MAN_INTEL|curtype;
+ fip->size += BANK_SIZE;
+ osc = fip->sector_count;
+ fip->sector_count += BANK_NBLOCKS;
+ if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT)
+ panic("Too many sectors in flash at address 0x%08lx\n",
+ (unsigned long)base);
+
+ addrb = addr;
+ for (i = osc; i < nsc; i++) {
+ fip->start[i] = (ulong)addrb;
+ fip->protect[i] = 0;
+ addrb = BANK_ADDR_NEXT_BLK(addrb);
+ }
+
+ addr = BANK_ADDR_NEXT_BANK(addr);
+ nbanks++;
+ }
+
+out:
+ if (nbanks == 0)
+ panic("ERROR: no flash found at address 0x%08lx\n",
+ (unsigned long)base);
+}
+
+static void
+bank_reset(flash_info_t *info, int sect)
+{
+ bank_addr_t addrw, eaddrw;
+
+ addrw = (bank_addr_t)info->start[sect];
+ eaddrw = BANK_ADDR_NEXT_WORD(addrw);
+
+ while (addrw < eaddrw) {
+#ifdef FLASH_DEBUG
+ printf(" writing reset cmd to addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ *addrw = BANK_CMD_RST;
+ addrw++;
+ }
+}
+
+static void
+bank_erase_init(flash_info_t *info, int sect)
+{
+ bank_addr_t addrw, saddrw, eaddrw;
+ int flag;
+
+#ifdef FLASH_DEBUG
+ printf("0x%08lx BANK_CMD_PROG\n", BANK_CMD_PROG);
+ printf("0x%08lx BANK_CMD_ERASE1\n", BANK_CMD_ERASE1);
+ printf("0x%08lx BANK_CMD_ERASE2\n", BANK_CMD_ERASE2);
+ printf("0x%08lx BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT);
+ printf("0x%08lx BANK_CMD_RST\n", BANK_CMD_RST);
+ printf("0x%08lx BANK_STAT_RDY\n", BANK_STAT_RDY);
+ printf("0x%08lx BANK_STAT_ERR\n", BANK_STAT_ERR);
+#endif
+
+ saddrw = (bank_addr_t)info->start[sect];
+ eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
+
+#ifdef FLASH_DEBUG
+ printf("erasing sector %d, start addr = 0x%08lx "
+ "(bank next word addr = 0x%08lx)\n", sect,
+ (unsigned long)saddrw, (unsigned long)eaddrw);
+#endif
+
+ /* Disable intrs which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (addrw = saddrw; addrw < eaddrw; addrw++) {
+#ifdef FLASH_DEBUG
+ printf(" writing erase cmd to addr 0x%08lx\n",
+ (unsigned long)addrw);
+#endif
+ *addrw = BANK_CMD_ERASE1;
+ *addrw = BANK_CMD_ERASE2;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+}
+
+static int
+bank_erase_poll(flash_info_t *info, int sect)
+{
+ bank_addr_t addrw, saddrw, eaddrw;
+ int sectdone, haderr;
+
+ saddrw = (bank_addr_t)info->start[sect];
+ eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
+
+ sectdone = 1;
+ haderr = 0;
+
+ for (addrw = saddrw; addrw < eaddrw; addrw++) {
+ bank_word_t stat = *addrw;
+
+#ifdef FLASH_DEBUG
+ printf(" checking status at addr "
+ "0x%08lx [0x%08lx]\n",
+ (unsigned long)addrw, stat);
+#endif
+ if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY)
+ sectdone = 0;
+ else if ((stat & BANK_STAT_ERR) != 0) {
+ printf(" failed on sector %d "
+ "(stat = 0x%08lx) at "
+ "address 0x%08lx\n",
+ sect, stat,
+ (unsigned long)addrw);
+ *addrw = BANK_CMD_CLR_STAT;
+ haderr = 1;
+ }
+ }
+
+ if (haderr)
+ return (-1);
+ else
+ return (sectdone);
+}
+
+static int
+bank_write_word(bank_addr_t addr, bank_word_t value)
+{
+ bank_word_t stat;
+ ulong start;
+ int flag, retval;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = BANK_CMD_PROG;
+
+ *addr = value;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ retval = 0;
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ do {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ retval = 1;
+ goto done;
+ }
+ stat = *addr;
+ } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
+
+ if ((stat & BANK_STAT_ERR) != 0) {
+ printf("flash program failed (stat = 0x%08lx) "
+ "at address 0x%08lx\n", (ulong)stat, (ulong)addr);
+ *addr = BANK_CMD_CLR_STAT;
+ retval = 3;
+ }
+
+done:
+ /* reset to read mode */
+ *addr = BANK_CMD_RST;
+
+ return (retval);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long
+flash_init(void)
+{
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ bank_probe(&flash_info[0], (bank_addr_t)CFG_FLASH_BASE);
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#if defined(CFG_FLASH_ENV_ADDR)
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_ENV_ADDR,
+#if defined(CFG_FLASH_ENV_BUF)
+ CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_BUF - 1,
+#else
+ CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_SIZE - 1,
+#endif
+ &flash_info[0]);
+#endif
+
+ return flash_info[0].size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+#if 0
+static void
+flash_get_offsets(ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start adress table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F320J5: printf ("28F320J5 (32 Mbit, 2 x 16bit)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#if 0
+static ulong
+flash_get_size(vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+
+ value = addr[0];
+
+ switch (value) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start adress table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *)info->start[0];
+
+ *addr = 0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+#endif /* 0 */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ int prot, sect, haderr;
+ ulong start, now, last;
+ int rcode = 0;
+
+#ifdef FLASH_DEBUG
+ printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
+ " Bank # %d: ", s_last - s_first + 1, s_first, s_last,
+ (info - flash_info) + 1);
+ flash_print_info(info);
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sector%s will not be erased!\n",
+ prot, (prot > 1 ? "s" : ""));
+ }
+
+ start = get_timer (0);
+ last = 0;
+ haderr = 0;
+
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ ulong estart;
+ int sectdone;
+
+ bank_erase_init(info, sect);
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ estart = get_timer(start);
+
+ do {
+ now = get_timer(start);
+
+ if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout (sect %d)\n", sect);
+ haderr = 1;
+ rcode = 1;
+ break;
+ }
+
+#ifndef FLASH_DEBUG
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+#endif
+
+ sectdone = bank_erase_poll(info, sect);
+
+ if (sectdone < 0) {
+ haderr = 1;
+ rcode = 1;
+ break;
+ }
+
+ } while (!sectdone);
+
+ if (haderr)
+ break;
+ }
+ }
+
+ if (haderr > 0)
+ printf (" failed\n");
+ else
+ printf (" done\n");
+
+ /* reset to read mode */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ bank_reset(info, sect);
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int
+write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word(flash_info_t *info, ulong dest, ulong data)
+{
+ int retval;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*(ulong *)dest & data) != data) {
+ return (2);
+ }
+
+ retval = bank_write_word((bank_addr_t)dest, (bank_word_t)data);
+
+ return (retval);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/icu862/flash.c b/board/icu862/flash.c
new file mode 100644
index 0000000000..79e7cc28ae
--- /dev/null
+++ b/board/icu862/flash.c
@@ -0,0 +1,617 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0,
+ size_b0 >> 20);
+ }
+
+ if (FLASH_BASE1_PRELIM != 0x0) {
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: Bank 1 (0x%08lx = %ld MB)"
+ " > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1 >> 20,
+ size_b0, size_b0 >> 20);
+
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+ } else {
+ size_b1 = 0;
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ /* ICU862 Board has only one Flash Bank */
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM033C)) {
+ /* set sector offsets for uniform sector type */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00040000);
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ puts ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: puts ("AMD "); break;
+ case FLASH_MAN_FUJ: puts ("FUJITSU "); break;
+ case FLASH_MAN_BM: puts ("BRIGHT MICRO "); break;
+ default: puts ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040: puts ("29F040/29LV040 (4 Mbit, uniform sectors)\n");
+ break;
+ case FLASH_AM400B: puts ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: puts ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: puts ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: puts ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: puts ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: puts ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: puts ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: puts ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM033C: puts ("AM29LV033C (32 Mbit)\n");
+ break;
+ default: puts ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ puts (" Sector Start Addresses:");
+
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0) {
+ puts ("\n ");
+ }
+
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+
+ puts ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+#if 0
+ ulong base = (ulong)addr;
+#endif
+ uchar value;
+
+ /* Write auto select command: read Manufacturer ID */
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+#endif
+
+ value = addr[0];
+
+ switch (value + (value << 16)) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ case AMD_ID_LV033C:
+ info->flash_id += FLASH_AM033C;
+ info->sector_count = 64;
+ info->size = 0x01000000;
+ break; /* => 16Mb */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+#if 0
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+#else
+ flash_get_offsets ((ulong)addr, &flash_info[0]);
+#endif
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+#if 1
+ /* We don't know why it happens, but on ICU Board *
+ * for AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if ( i == 32 ) {
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+ }
+#endif
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *)info->start[0];
+#if 0
+ *addr = 0x00F000F0; /* reset bank */
+#else
+ *addr = 0xF0F0F0F0; /* reset bank */
+#endif
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ puts ("- missing\n");
+ } else {
+ puts ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ puts ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ puts ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x80808080;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+#endif
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+#if 0
+ addr[0] = 0x00300030;
+#else
+ addr[0] = 0x30303030;
+#endif
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+#if 0
+ while ((addr[0] & 0x00800080) != 0x00800080)
+#else
+ while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
+#endif
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ puts ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+#if 0
+ addr[0] = 0x00F000F0; /* reset bank */
+#else
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+#endif
+
+ puts (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#if 0
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+#else
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0xA0A0A0A0;
+#endif
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+#if 0
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
+#else
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
+#endif
+ {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/ip860/flash.c b/board/ip860/flash.c
new file mode 100644
index 0000000000..4b0ea9bb01
--- /dev/null
+++ b/board/ip860/flash.c
@@ -0,0 +1,456 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
+ unsigned long size;
+ int i;
+
+ /* Init: enable write,
+ * or we cannot even write flash commands
+ */
+ bcsr->bd_ctrl |= BD_CTRL_FLWE;
+
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+ memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+ (memctl->memc_br1 & ~(BR_BA_MSK));
+
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* all possible flash types
+ * (28F016SV, 28F160S3, 28F320S3)
+ * have the same erase block size: 64 kB per chip,
+ * of 128 kB per bank
+ */
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += 0x00020000;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+ break;
+ case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+ break;
+ case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+ /* Write "Intelligent Identifier" command: read Manufacturer ID */
+ *addr = 0x90909090;
+
+ value = addr[0];
+ switch (value) {
+ case (MT_MANUFACT & 0x00FF00FF): /* MT or => Intel */
+ case (INTEL_ALT_MANU & 0x00FF00FF):
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case (INTEL_ID_28F016S):
+ info->flash_id += FLASH_28F016SV;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F160S3):
+ info->flash_id += FLASH_28F160S3;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F320S3):
+ info->flash_id += FLASH_28F320S3;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 2x4 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000);
+ /* don't know how to check sector protection */
+ info->protect[i] = 0;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+
+ *addr = 0xFFFFFF; /* reset bank to read array mode */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Single Block Erase Command */
+ *addr = 0x20202020;
+ /* Confirm */
+ *addr = 0xD0D0D0D0;
+ /* Resume Command, as per errata update */
+ *addr = 0xD0D0D0D0;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while ((*addr & 0x00800080) != 0x00800080) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ /* reset to read mode */
+ *addr = 0xFFFFFFFF;
+ }
+ }
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start, csr;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = 0x10101010;
+
+ /* Write Data */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ flag = 0;
+ while (((csr = *addr) & 0x00800080) != 0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x00400040) {
+printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+
+ /* Clear Status Registers Command */
+ *addr = 0x50505050;
+ /* Reset to read array mode */
+ *addr = 0xFFFFFFFF;
+
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/ivm/flash.c b/board/ivm/flash.c
new file mode 100644
index 0000000000..b5453dff1e
--- /dev/null
+++ b/board/ivm/flash.c
@@ -0,0 +1,598 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0: "
+ "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+ flash_info[0].flash_id,
+ size_b0, size_b0<<20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | \
+ BR_MS_GPCM | BR_PS_16 | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_MT:
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + ((i-3) * 0x00020000);
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+ return;
+
+ case FLASH_MAN_SST:
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00002000);
+ }
+ return;
+
+ case FLASH_MAN_AMD:
+ case FLASH_MAN_FUJ:
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+ return;
+ default:
+ printf ("Don't know sector ofsets for flash type 0x%lx\n",
+ info->flash_id);
+ return;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_MT: printf ("MT "); break;
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST200A: printf ("39xF200A (2M = 128K x 16)\n");
+ break;
+ case FLASH_SST400A: printf ("39xF400A (4M = 256K x 16)\n");
+ break;
+ case FLASH_SST800A: printf ("39xF800A (8M = 512K x 16)\n");
+ break;
+ case FLASH_STM800AB: printf ("M29W800AB (8M = 512K x 16)\n");
+ break;
+ case FLASH_28F008S5: printf ("28F008S5 (1M = 64K x 16)\n");
+ break;
+ case FLASH_28F400_T: printf ("28F400B3 (4Mbit, top boot sector)\n");
+ break;
+ case FLASH_28F400_B: printf ("28F400B3 (4Mbit, bottom boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ if (info->size >= (1 << 20)) {
+ i = 20;
+ } else {
+ i = 10;
+ }
+ printf (" Size: %ld %cB in %d Sectors\n",
+ info->size >> i,
+ (i == 20) ? 'M' : 'k',
+ info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ ushort value;
+ vu_short *saddr = (vu_short *)addr;
+
+ /* Read Manufacturer ID */
+ saddr[0] = 0x0090;
+ value = saddr[0];
+
+ switch (value) {
+ case (AMD_MANUFACT & 0xFFFF):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FUJ_MANUFACT & 0xFFFF):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (SST_MANUFACT & 0xFFFF):
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (STM_MANUFACT & 0xFFFF):
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case (MT_MANUFACT & 0xFFFF):
+ info->flash_id = FLASH_MAN_MT;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ saddr[0] = 0x00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ value = saddr[1]; /* device ID */
+
+ switch (value) {
+ case (AMD_ID_LV400T & 0xFFFF):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV400B & 0xFFFF):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV800T & 0xFFFF):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV800B & 0xFFFF):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV160T & 0xFFFF):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV160B & 0xFFFF):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case (AMD_ID_LV320T & 0xFFFF):
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (AMD_ID_LV320B & 0xFFFF):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ case (SST_ID_xF200A & 0xFFFF):
+ info->flash_id += FLASH_SST200A;
+ info->sector_count = 64; /* 39xF200A ID ( 2M = 128K x 16 ) */
+ info->size = 0x00080000;
+ break;
+ case (SST_ID_xF400A & 0xFFFF):
+ info->flash_id += FLASH_SST400A;
+ info->sector_count = 128; /* 39xF400A ID ( 4M = 256K x 16 ) */
+ info->size = 0x00100000;
+ break;
+ case (SST_ID_xF800A & 0xFFFF):
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 256; /* 39xF800A ID ( 8M = 512K x 16 ) */
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ case (STM_ID_x800AB & 0xFFFF):
+ info->flash_id += FLASH_STM800AB;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ case (MT_ID_28F400_T & 0xFFFF):
+ info->flash_id += FLASH_28F400_T;
+ info->sector_count = 7;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+ case (MT_ID_28F400_B & 0xFFFF):
+ info->flash_id += FLASH_28F400_B;
+ info->sector_count = 7;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ saddr[0] = 0x00FF; /* restore read mode */
+ return (0); /* => no or unknown flash */
+
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ saddr[0] = 0x00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MT) {
+ printf ("Can erase only MT flash types - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_short *addr = (vu_short *)(info->start[sect]);
+ unsigned short status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = 0x0050; /* clear status register */
+ *addr = 0x0020; /* erase setup */
+ *addr = 0x00D0; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = *addr) & 0x0080) != 0x0080) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0x00FF; /* reset to read mode */
+ return 1;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ *addr = 0x00FF; /* reset to read mode */
+ }
+ }
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define FLASH_WIDTH 2 /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ wp = (addr & ~(FLASH_WIDTH-1)); /* get lower FLASH_WIDTH aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<FLASH_WIDTH && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<FLASH_WIDTH; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_data(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += FLASH_WIDTH;
+ }
+
+ /*
+ * handle FLASH_WIDTH aligned part
+ */
+ while (cnt >= FLASH_WIDTH) {
+ data = 0;
+ for (i=0; i<FLASH_WIDTH; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += FLASH_WIDTH;
+ cnt -= FLASH_WIDTH;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<FLASH_WIDTH && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<FLASH_WIDTH; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_data(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_short *addr = (vu_short *)dest;
+ ushort sdata = (ushort)data;
+ ushort status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & sdata) != sdata) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = 0x0040; /* write setup */
+ *addr = sdata;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ while (((status = *addr) & 0x0080) != 0x0080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = 0x00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = 0x00FF; /* restore read mode */
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/lantec/flash.c b/board/lantec/flash.c
new file mode 100644
index 0000000000..df58510333
--- /dev/null
+++ b/board/lantec/flash.c
@@ -0,0 +1,625 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Derived from ../tqm8xx/flash.c
+ * [Torsten Stevens, FHG IMS; Bruno Achauer, Exet AG]
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0: "
+ "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+ flash_info[0].flash_id,
+ size_b0, size_b0<<20);
+ }
+
+ DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE5_PRELIM);
+
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE5_PRELIM, &flash_info[1]);
+
+ DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+
+ DEBUGF ("## Before remap: "
+ "BR0: 0x%08x OR0: 0x%08x "
+ "BR1: 0x%08x OR1: 0x%08x\n",
+ memctl->memc_br0, memctl->memc_or0,
+ memctl->memc_br1, memctl->memc_or1);
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | \
+ BR_MS_GPCM | BR_PS_32 | BR_V;
+
+ DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n",
+ memctl->memc_br0, memctl->memc_or0);
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ memctl->memc_or5 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+ memctl->memc_br5 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_PS_32 | BR_V;
+
+ DEBUGF("## BR5: 0x%08x OR5: 0x%08x\n",
+ memctl->memc_br5, memctl->memc_or5);
+
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_info[1].size = size_b1;
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[1]);
+#endif
+ } else {
+ memctl->memc_br5 = 0; /* invalidate bank */
+ memctl->memc_or5 = 0; /* invalidate bank */
+
+ DEBUGF("## DISABLE BR5: 0x%08x OR5: 0x%08x\n",
+ memctl->memc_br5, memctl->memc_or5);
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ flash_info[1].size = 0;
+ }
+
+ DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+
+ value = addr[0];
+
+ switch (value) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *)info->start[0];
+
+ *addr = 0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x00300030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+ while ((addr[0] & 0x00800080) != 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+ addr[0] = 0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/mbx8xx/flash.c b/board/mbx8xx/flash.c
new file mode 100644
index 0000000000..e1aa47bbaa
--- /dev/null
+++ b/board/mbx8xx/flash.c
@@ -0,0 +1,408 @@
+/*
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Flash Routines for AM290[48]0B devices
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "vpd.h"
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size, totsize;
+ int i;
+ ulong addr;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ totsize = 0;
+ addr = 0xfc000000;
+ for(i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ size = flash_get_size((vu_long *)addr, &flash_info[i]);
+ if (flash_info[i].flash_id == FLASH_UNKNOWN)
+ break;
+ totsize += size;
+ addr += size;
+ }
+
+ addr = 0xfe000000;
+ for(i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+
+ size = flash_get_size((vu_long *)addr, &flash_info[i]);
+ if (flash_info[i].flash_id == FLASH_UNKNOWN)
+ break;
+ totsize += size;
+ addr += size;
+ }
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ return (totsize);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id >> 16) {
+ case 0x1:
+ printf ("AMD ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case AMD_ID_F040B:
+ printf ("AM29F040B (4 Mbit)\n");
+ break;
+ case AMD_ID_F080B:
+ printf ("AM29F080B (8 Mbit)\n");
+ break;
+ case AMD_ID_F016D:
+ printf ("AM29F016D (16 Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong vendor, devid;
+ ulong base = (ulong)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+
+ vendor = addr[0];
+ devid = addr[1] & 0xff;
+
+ /* only support AMD */
+ if (vendor != 0x01010101) {
+ return 0;
+ }
+
+ vendor &= 0xf;
+ devid &= 0xff;
+
+ if (devid == AMD_ID_F040B) {
+ info->flash_id = vendor << 16 | devid;
+ info->sector_count = 8;
+ info->size = info->sector_count * 0x10000;
+ }
+ else if (devid == AMD_ID_F080B) {
+ info->flash_id = vendor << 16 | devid;
+ info->sector_count = 16;
+ info->size = 4 * info->sector_count * 0x10000;
+ }
+ else if (devid == AMD_ID_F016D) {
+ info->flash_id = vendor << 16 | devid;
+ info->sector_count = 32;
+ info->size = 4 * info->sector_count * 0x10000;
+ }
+ else {
+ printf ("## Unknown Flash Type: %08lx\n", devid);
+ return 0;
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* sector base address */
+ info->start[i] = base + i * (info->size / info->sector_count);
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+ addr[0] = 0xF0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0XAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x80808080;
+ addr[0x0555] = 0XAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x30303030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+ while ((addr[0] & 0x80808080) != 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0xA0A0A0A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/mbx8xx/vpd.c b/board/mbx8xx/vpd.c
new file mode 100644
index 0000000000..6f883520cd
--- /dev/null
+++ b/board/mbx8xx/vpd.c
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Code in faintly related to linux/arch/ppc/8xx_io:
+ * MPC8xx CPM I2C interface. Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ * This file implements functions to read the MBX's Vital Product Data
+ * (VPD). I can't use the more general i2c code in mpc8xx/... since I need
+ * the VPD at a time where there is no RAM available yet. Hence the VPD is
+ * read into a special area in the DPRAM (see config_MBX.h::CFG_DPRAMVPD).
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#ifdef CONFIG_8xx
+#include <commproc.h>
+#endif
+#include "vpd.h"
+
+/* Location of receive/transmit buffer descriptors
+ * Allocate one transmit bd and one receive bd.
+ * IIC_BD_FREE points to free bd space which we'll use as tx buffer.
+ */
+#define IIC_BD_TX1 (BD_IIC_START + 0*sizeof(cbd_t))
+#define IIC_BD_TX2 (BD_IIC_START + 1*sizeof(cbd_t))
+#define IIC_BD_RX (BD_IIC_START + 2*sizeof(cbd_t))
+#define IIC_BD_FREE (BD_IIC_START + 3*sizeof(cbd_t))
+
+/* FIXME -- replace 0x2000 with offsetof */
+#define VPD_P ((vpd_t *)(CFG_IMMR + 0x2000 + CFG_DPRAMVPD))
+
+/* transmit/receive buffers */
+#define IIC_RX_LENGTH 128
+
+#define WITH_MICROCODE_PATCH
+
+vpd_packet_t * vpd_find_packet(u_char ident)
+{
+ vpd_packet_t *packet;
+ vpd_t *vpd = VPD_P;
+
+ packet = (vpd_packet_t *)&vpd->packets;
+ while ((packet->identifier != ident) && packet->identifier != 0xFF)
+ {
+ packet = (vpd_packet_t *)((char *)packet + packet->size + 2);
+ }
+ return packet;
+}
+
+void vpd_init(void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile i2c8xx_t *i2c = (i2c8xx_t *)&(im->im_i2c);
+ volatile iic_t *iip;
+#ifdef WITH_MICROCODE_PATCH
+ ulong reloc = 0;
+#endif
+
+ iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+
+ /*
+ * kludge: when running from flash, no microcode patch can be
+ * installed. However, the DPMEM usually contains non-zero
+ * garbage at the relocatable patch base location, so lets clear
+ * it now. This way the rest of the code can support the microcode
+ * patch dynamically.
+ */
+ if ((ulong)vpd_init & 0xff000000)
+ iip->iic_rpbase = 0;
+
+#ifdef WITH_MICROCODE_PATCH
+ /* Check for and use a microcode relocation patch. */
+ if ((reloc = iip->iic_rpbase))
+ iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#endif
+ /* Initialize Port B IIC pins */
+ cp->cp_pbpar |= 0x00000030;
+ cp->cp_pbdir |= 0x00000030;
+ cp->cp_pbodr |= 0x00000030;
+
+ i2c->i2c_i2mod = 0x04; /* filter clock */
+ i2c->i2c_i2add = 0x34; /* select an arbitrary (unique) address */
+ i2c->i2c_i2brg = 0x07; /* make clock run maximum slow */
+ i2c->i2c_i2cmr = 0x00; /* disable interrupts */
+ i2c->i2c_i2cer = 0x1f; /* clear events */
+ i2c->i2c_i2com = 0x01; /* configure i2c to work as master */
+
+ if (vpd_read(0xa4, (uchar*)VPD_P, VPD_EEPROM_SIZE, 0) != VPD_EEPROM_SIZE)
+ {
+ hang();
+ }
+}
+
+
+/* Read from I2C.
+ * This is a two step process. First, we send the "dummy" write
+ * to set the device offset for the read. Second, we perform
+ * the read operation.
+ */
+int vpd_read(uint iic_device, uchar *buf, int count, int offset)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile i2c8xx_t *i2c = (i2c8xx_t *)&(im->im_i2c);
+ volatile iic_t *iip;
+ volatile cbd_t *tbdf1, *tbdf2, *rbdf;
+ uchar *tb;
+ uchar event;
+#ifdef WITH_MICROCODE_PATCH
+ ulong reloc = 0;
+#endif
+
+ iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+#ifdef WITH_MICROCODE_PATCH
+ /* Check for and use a microcode relocation patch. */
+ if ((reloc = iip->iic_rpbase))
+ iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#endif
+ tbdf1 = (cbd_t *)&cp->cp_dpmem[IIC_BD_TX1];
+ tbdf2 = (cbd_t *)&cp->cp_dpmem[IIC_BD_TX2];
+ rbdf = (cbd_t *)&cp->cp_dpmem[IIC_BD_RX];
+
+ /* Send a "dummy write" operation. This is a write request with
+ * only the offset sent, followed by another start condition.
+ * This will ensure we start reading from the first location
+ * of the EEPROM.
+ */
+ tb = (uchar*)&cp->cp_dpmem[IIC_BD_FREE];
+ tb[0] = iic_device & 0xfe; /* device address */
+ tb[1] = offset; /* offset */
+ tbdf1->cbd_bufaddr = (uint)tb;
+ tbdf1->cbd_datlen = 2;
+ tbdf1->cbd_sc = 0x8400;
+
+ tb += 2;
+ tb[0] = iic_device | 1; /* device address */
+ tbdf2->cbd_bufaddr = (uint)tb;
+ tbdf2->cbd_datlen = count+1;
+ tbdf2->cbd_sc = 0xbc00;
+
+ rbdf->cbd_bufaddr = (uint)buf;
+ rbdf->cbd_datlen = 0;
+ rbdf->cbd_sc = 0xb000;
+
+ iip->iic_tbase = IIC_BD_TX1;
+ iip->iic_tbptr = IIC_BD_TX1;
+ iip->iic_rbase = IIC_BD_RX;
+ iip->iic_rbptr = IIC_BD_RX;
+ iip->iic_rfcr = 0x15;
+ iip->iic_tfcr = 0x15;
+ iip->iic_mrblr = count;
+ iip->iic_rstate = 0;
+ iip->iic_tstate = 0;
+
+ i2c->i2c_i2cer = 0x1f; /* clear event mask */
+ i2c->i2c_i2mod |= 1; /* enable iic operation */
+ i2c->i2c_i2com |= 0x80; /* start master */
+
+ /* wait for IIC transfer */
+ do {
+ __asm__ volatile ("eieio");
+ event = i2c->i2c_i2cer;
+ } while (event == 0);
+
+ if ((event & 0x10) || (event & 0x04)) {
+ count = -1;
+ goto bailout;
+ }
+
+bailout:
+ i2c->i2c_i2mod &= ~1; /* turn off iic operation */
+ i2c->i2c_i2cer = 0x1f; /* clear event mask */
+
+ return count;
+}
diff --git a/board/mousse/flash.h b/board/mousse/flash.h
new file mode 100644
index 0000000000..b7e4619c01
--- /dev/null
+++ b/board/mousse/flash.h
@@ -0,0 +1,78 @@
+#ifndef FLASH_LIB_H
+#define FLASH_LIB_H
+
+#include <common.h>
+
+/* PIO operations max */
+#define FLASH_PROGRAM_POLLS 100000
+
+/* 10 Seconds default */
+#define FLASH_ERASE_SECTOR_TIMEOUT (10*1000 /*SEC*/ )
+
+/* Flash device info structure */
+typedef struct flash_dev_s {
+ char name[24]; /* Bank Name */
+ int bank; /* Bank 0 or 1 */
+ unsigned int base; /* Base address */
+ int sectors; /* Sector count */
+ int lgSectorSize; /* Log2(usable bytes/sector) */
+ int vendorID; /* Expected vendor ID */
+ int deviceID; /* Expected device ID */
+ int found; /* Set if found by flashLibInit */
+ int swap; /* Set for bank 1 if byte swap req'd */
+} flash_dev_t;
+
+#define FLASH_MAX_POS(dev) \
+ ((dev)->sectors << (dev)->lgSectorSize)
+
+#define FLASH_SECTOR_POS(dev, sector) \
+ ((sector) << (dev)->lgSectorSize)
+
+/* AMD 29F040 */
+#define FLASH0_BANK 0
+#define FLASH0_VENDOR_ID 0x01
+#define FLASH0_DEVICE_ID 0x49
+
+/* AMD29LV160DB */
+#define FLASH1_BANK 1
+#define FLASH1_VENDOR_ID 0x0001
+#define FLASH1_DEVICE_ID 0x2249
+
+extern flash_dev_t flashDev[];
+extern int flashDevCount;
+
+/*
+ * Device pointers
+ *
+ * These must be kept in sync with the table in flashLib.c.
+ */
+#define FLASH_DEV_BANK0_SA0 (&flashDev[0])
+#define FLASH_DEV_BANK0_SA1 (&flashDev[1])
+#define FLASH_DEV_BANK0_SA2 (&flashDev[2])
+#define FLASH_DEV_BANK0_LOW (&flashDev[3]) /* 960K */
+#define FLASH_DEV_BANK0_BOOT (&flashDev[4]) /* PLCC */
+#define FLASH_DEV_BANK0_HIGH (&flashDev[5]) /* 512K PLCC shadow */
+
+unsigned long flash_init(void);
+int flashEraseSector(flash_dev_t *dev, int sector);
+int flashErase(flash_dev_t *dev);
+int flashRead(flash_dev_t *dev, int pos, char *buf, int len);
+int flashWrite(flash_dev_t *dev, int pos, char *buf, int len);
+int flashWritable(flash_dev_t *dev, int pos, int len);
+int flashDiag(flash_dev_t *dev);
+int flashDiagAll(void);
+
+ulong flash_get_size (vu_long *addr, flash_info_t *info);
+void flash_print_info (flash_info_t *info);
+int flash_erase (flash_info_t *info, int s_first, int s_last);
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt);
+
+/*
+ * Flash info indices.
+ */
+#define FLASH_BANK_KERNEL 0
+#define FLASH_BANK_BOOT 1
+#define FLASH_BANK_AUX 2
+#define FIRST_SECTOR 0
+
+#endif /* !FLASH_LIB_H */
diff --git a/board/mpc8260ads/flash.c b/board/mpc8260ads/flash.c
new file mode 100644
index 0000000000..ec6a3b3fed
--- /dev/null
+++ b/board/mpc8260ads/flash.c
@@ -0,0 +1,508 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#ifndef CONFIG_MPC8260ADS
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
+#endif
+ unsigned long size;
+ int i;
+
+ /* Init: enable write,
+ * or we cannot even write flash commands
+ */
+#ifndef CONFIG_MPC8260ADS
+ bcsr->bd_ctrl |= BD_CTRL_FLWE;
+#endif
+
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ /* set the default sector offset */
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+#ifndef CONFIG_MPC8260ADS
+ /* Remap FLASH according to real size */
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+ memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+ (memctl->memc_br1 & ~(BR_BA_MSK));
+#endif
+
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_SHARP: printf ("Sharp "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+ break;
+ case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+ break;
+ case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+ break;
+ case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+ ulong sector_offset;
+
+ /* Write "Intelligent Identifier" command: read Manufacturer ID */
+ *addr = 0x90909090;
+
+ value = addr[0] & 0x00FF00FF;
+ switch (value) {
+ case MT_MANUFACT: /* SHARP, MT or => Intel */
+ case INTEL_ALT_MANU:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ printf("unknown manufacturer: %x\n", (unsigned int)value);
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case (INTEL_ID_28F016S):
+ info->flash_id += FLASH_28F016SV;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ sector_offset = 0x20000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F160S3):
+ info->flash_id += FLASH_28F160S3;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ sector_offset = 0x20000;
+ break; /* => 2x2 MB */
+
+ case (INTEL_ID_28F320S3):
+ info->flash_id += FLASH_28F320S3;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ sector_offset = 0x20000;
+ break; /* => 2x4 MB */
+
+ case SHARP_ID_28F016SCL:
+ case SHARP_ID_28F016SCZ:
+ info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+ info->sector_count = 32;
+ info->size = 0x00800000;
+ sector_offset = 0x40000;
+ break; /* => 4x2 MB */
+
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += sector_offset;
+ /* don't know how to check sector protection */
+ info->protect[i] = 0;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+
+ *addr = 0xFFFFFF; /* reset bank to read array mode */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+ && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* Make Sure Block Lock Bit is not set. */
+ if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+ return 1;
+ }
+
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+
+ last = start = get_timer (0);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ /* Single Block Erase Command */
+ *addr = 0x20202020;
+ /* Confirm */
+ *addr = 0xD0D0D0D0;
+
+ if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+ /* Resume Command, as per errata update */
+ *addr = 0xD0D0D0D0;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+ while ((*addr & 0x80808080) != 0x80808080) {
+ if(*addr & 0x20202020){
+ printf("Error in Block Erase - Lock Bit may be set!\n");
+ printf("Status Register = 0x%X\n", (uint)*addr);
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ /* reset to read mode */
+ *addr = 0xFFFFFFFF;
+ }
+ }
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start, csr;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = 0x10101010;
+
+ /* Write Data */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ flag = 0;
+ while (((csr = *addr) & 0x80808080) != 0x80808080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x40404040) {
+ printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+
+ /* Clear Status Registers Command */
+ *addr = 0x50505050;
+ /* Reset to read array mode */
+ *addr = 0xFFFFFFFF;
+
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long * addr)
+{
+ ulong start, now;
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ /* Clear Status Register */
+ *addr = 0x50505050;
+
+ *addr = 0x60606060;
+ *addr = 0xd0d0d0d0;
+
+ start = get_timer (0);
+ while(*addr != 0x80808080){
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout on clearing Block Lock Bit\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ return 1;
+ }
+ }
+ return 0;
+}
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
new file mode 100644
index 0000000000..f0c541b44d
--- /dev/null
+++ b/board/mpl/common/flash.c
@@ -0,0 +1,860 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+/*
+ * Modified 3/7/2001
+ * - adopted for pip405, Denis Peter, MPL AG Switzerland
+ * TODO:
+ * clean-up
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#ifdef CONFIG_PIP405
+#include "../pip405/pip405.h"
+#endif
+#ifdef CONFIG_MIP405
+#include "../mip405/mip405.h"
+#endif
+#include "common_util.h"
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
+
+
+#ifdef CONFIG_ADCIOP
+#define ADDR0 0x0aa9
+#define ADDR1 0x0556
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_CPCI405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_PIP405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_MIP405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#define FALSE 0
+#define TRUE 1
+
+/*-----------------------------------------------------------------------
+ */
+
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ unsigned long pbcr;
+ unsigned long base_b0, base_b1;
+ unsigned char rc;
+
+ rc=switch_cs(FALSE); /* map Flash High */
+
+ if(rc)
+ printf("(MPS Boot) ");
+ else
+ printf("(Flash Boot) ");
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1)
+ {
+ /* Setup offsets */
+ /* flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]); */
+ /* Monitor protection ON by default */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+ size_b1 = 0 ;
+ flash_info[0].size = size_b0;
+ }
+
+ /* 2 banks */
+ else
+ {
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1)
+ {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0)
+ {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1+size_b1-CFG_MONITOR_LEN,
+ base_b1+size_b1-1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ }/* else 2 banks */
+ switch_cs(rc); /* switch mode back */
+ return (size_b0 + size_b1);
+}
+
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ return;
+}
+#if 0
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)){
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+ else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
+
+#endif
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_INTEL320T: printf ("TE28F320C3 (32 Mbit, top sector size)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+ if ((i % 5) == 0)
+ printf ("\n ");
+#if 0 /* test-only */
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+#else
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+#endif
+ );
+ }
+ printf ("\n");
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+
+ value = addr2[0];
+ /* printf("flash_get_size value: %x\n",value); */
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (FLASH_WORD_SIZE)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ case (FLASH_WORD_SIZE)SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+ value = addr2[1]; /* device ID */
+ /* printf("Device value %x\n",value); */
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+ case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+#if 0 /* enable when device IDs are available */
+ case (FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#endif
+ case (FLASH_WORD_SIZE)SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+ case (FLASH_WORD_SIZE)INTEL_ID_28F320C3T:
+ info->flash_id += FLASH_INTEL320T;
+ info->sector_count = 71;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+
+ case (FLASH_WORD_SIZE)SST_ID_xF160A:
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)){
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ if(info->sector_count==71) {
+
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000A000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x0000E000;
+ for (; i >= 0; i--)
+ info->start[i] = base + i * 0x000010000;
+ }
+ else {
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--)
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile unsigned char *)info->start[0];
+ addr2[ADDR0] = 0xAA;
+ addr2[ADDR1] = 0x55;
+ addr2[ADDR0] = 0xF0; /* reset bank */
+#else
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif
+#else /* test-only */
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif /* test-only */
+ }
+ return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+int intel_wait_for_DQ7(flash_info_t *info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ addr[0]=(FLASH_WORD_SIZE)0x00500050;
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+ /* printf("Erasing sector %p\n", addr2); */ /* CLH */
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ for (i=0; i<50; i++)
+ udelay(1000); /* wait 1 ms */
+ wait_for_DQ7(info, sect);
+ }
+ else {
+ if((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
+ addr2[0] = (FLASH_WORD_SIZE)0x00600060; /* unlock sector */
+ addr2[0] = (FLASH_WORD_SIZE)0x00D000D0; /* sector erase */
+ intel_wait_for_DQ7(info, sect);
+ addr2[0] = (FLASH_WORD_SIZE)0x00200020; /* sector erase */
+ addr2[0] = (FLASH_WORD_SIZE)0x00D000D0; /* sector erase */
+ intel_wait_for_DQ7(info, sect);
+ }
+ else {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ wait_for_DQ7(info, sect);
+ }
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ /* wait_for_DQ7(info, sect); */
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+#if 0
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+ wait_for_DQ7(info, l_sect);
+
+DONE:
+#endif
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt)
+{
+ int i;
+ volatile FLASH_WORD_SIZE *addr2;
+ long c;
+ c= (long)cnt;
+ for(i=info->sector_count-1;i>0;i--)
+ {
+ if(addr>=info->start[i])
+ break;
+ }
+ do {
+ addr2 = (FLASH_WORD_SIZE *)(info->start[i]);
+ addr2[0] = (FLASH_WORD_SIZE)0x00600060; /* unlock sector setup */
+ addr2[0] = (FLASH_WORD_SIZE)0x00D000D0; /* unlock sector */
+ intel_wait_for_DQ7(info, i);
+ i++;
+ c-=(info->start[i]-info->start[i-1]);
+ }while(c>0);
+
+
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ if((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
+ unlock_intel_sectors(info,addr,cnt);
+ }
+ wp = (addr & ~3); /* get lower word aligned address */
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ if((wp % 0x10000)==0)
+ printf("."); /* show Progress */
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ rc=write_word(info, wp, data);
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static FLASH_WORD_SIZE *read_val = (FLASH_WORD_SIZE *)0x200000;
+
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+ ulong start;
+ int flag;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *)dest) &
+ (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+ {
+ if((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
+ /* intel style writting */
+ dest2[i] = (FLASH_WORD_SIZE)0x00500050;
+ dest2[i] = (FLASH_WORD_SIZE)0x00400040;
+ *read_val++ = data2[i];
+ dest2[i] = data2[i];
+ if (flag)
+ enable_interrupts();
+ /* data polling for D7 */
+ start = get_timer (0);
+ udelay(10);
+ while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080)
+ {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
+ dest2[i] = (FLASH_WORD_SIZE)0x00FF00FF; /* return to read mode */
+ udelay(10);
+ dest2[i] = (FLASH_WORD_SIZE)0x00FF00FF; /* return to read mode */
+ if(dest2[i]!=data2[i])
+ printf("Error at %p 0x%04X != 0x%04X\n",&dest2[i],dest2[i],data2[i]);
+ }
+ else {
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0;
+ dest2[i] = data2[i];
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/mpl/common/isa.c b/board/mpl/common/isa.c
new file mode 100644
index 0000000000..40731fc79f
--- /dev/null
+++ b/board/mpl/common/isa.c
@@ -0,0 +1,469 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * TODO: clean-up
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <devices.h>
+#include "isa.h"
+#include "piix4_pci.h"
+#include "kbd.h"
+#include "video.h"
+
+extern int drv_isa_kbd_init (void);
+
+#undef ISA_DEBUG
+
+#ifdef ISA_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+
+
+/* fdc (logical device 0) */
+const SIO_LOGDEV_TABLE sio_fdc[] = {
+ {0x60, 3}, /* set IO to FDPort (3F0) */
+ {0x61, 0xF0}, /* set IO to FDPort (3F0) */
+ {0x70, 06}, /* set IRQ 6 for FDPort */
+ {0x74, 02}, /* set DMA 2 for FDPort */
+ {0xF0, 0x05}, /* set to PS2 type */
+ {0xF1, 0x00}, /* default value */
+ {0x30, 1}, /* and activate the device */
+ {0xFF, 0} /* end of device table */
+};
+/* paralell port (logical device 3) */
+const SIO_LOGDEV_TABLE sio_pport[] = {
+ {0x60, 3}, /* set IO to PPort (378) */
+ {0x61, 0x78}, /* set IO to PPort (378) */
+ {0x70, 07}, /* set IRQ 7 for PPort */
+ {0xF1, 00}, /* set PPort to normal */
+ {0x30, 1}, /* and activate the device */
+ {0xFF, 0} /* end of device table */
+};
+/* paralell port (logical device 3) Floppy assigned to lpt */
+const SIO_LOGDEV_TABLE sio_pport_fdc[] = {
+ {0x60, 3}, /* set IO to PPort (378) */
+ {0x61, 0x78}, /* set IO to PPort (378) */
+ {0x70, 07}, /* set IRQ 7 for PPort */
+ {0xF1, 02}, /* set PPort to Floppy */
+ {0x30, 1}, /* and activate the device */
+ {0xFF, 0} /* end of device table */
+};
+/* uart 1 (logical device 4) */
+const SIO_LOGDEV_TABLE sio_com1[] = {
+ {0x60, 3}, /* set IO to COM1 (3F8) */
+ {0x61, 0xF8}, /* set IO to COM1 (3F8) */
+ {0x70, 04}, /* set IRQ 4 for COM1 */
+ {0x30, 1}, /* and activate the device */
+ {0xFF, 0} /* end of device table */
+};
+/* uart 2 (logical device 5) */
+const SIO_LOGDEV_TABLE sio_com2[] = {
+ {0x60, 2}, /* set IO to COM2 (2F8) */
+ {0x61, 0xF8}, /* set IO to COM2 (2F8) */
+ {0x70, 03}, /* set IRQ 3 for COM2 */
+ {0x30, 1}, /* and activate the device */
+ {0xFF, 0} /* end of device table */
+};
+
+/* keyboard controller (logical device 7) */
+const SIO_LOGDEV_TABLE sio_keyboard[] = {
+ {0x70, 1}, /* set IRQ 1 for keyboard */
+ {0x72, 12}, /* set IRQ 12 for mouse */
+ {0xF0, 0}, /* disable Port92 (this is a PowerPC!!) */
+ {0x30, 1}, /* and activate the device */
+ {0xFF, 0} /* end of device table */
+};
+
+
+/*******************************************************************************
+* Config SuperIO FDC37C672
+********************************************************************************/
+unsigned char open_cfg_super_IO(int address)
+{
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
+ if(in8(CFG_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
+ return TRUE;
+ else
+ return FALSE;
+}
+
+void close_cfg_super_IO(int address)
+{
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,0xAA); /* close config */
+}
+
+
+unsigned char read_cfg_super_IO(int address, unsigned char function, unsigned char regaddr)
+{
+ /* assuming config reg is open */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
+ return in8(CFG_ISA_IO_BASE_ADDRESS | address | 1);
+}
+
+void write_cfg_super_IO(int address, unsigned char function, unsigned char regaddr, unsigned char data)
+{
+ /* assuming config reg is open */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
+ out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,data); /* writes the data */
+}
+
+void isa_write_table(SIO_LOGDEV_TABLE *ldt,unsigned char ldev)
+{
+ while (ldt->index != 0xFF) {
+ write_cfg_super_IO(SIO_CFG_PORT, ldev, ldt->index, ldt->val);
+ ldt++;
+ } /* endwhile */
+}
+
+void isa_sio_loadtable(void)
+{
+ unsigned char *s = getenv("floppy");
+ /* setup Floppy device 0*/
+ isa_write_table((SIO_LOGDEV_TABLE *)&sio_fdc,0);
+ /* setup parallel port device 3 */
+ if(s && !strncmp(s, "lpt", 3)) {
+ printf("SIO: Floppy assigned to LPT\n");
+ /* floppy is assigned to the LPT */
+ isa_write_table((SIO_LOGDEV_TABLE *)&sio_pport_fdc,3);
+ }
+ else {
+ /*printf("Floppy assigned to internal port\n");*/
+ isa_write_table((SIO_LOGDEV_TABLE *)&sio_pport,3);
+ }
+ /* setup Com1 port device 4 */
+ isa_write_table((SIO_LOGDEV_TABLE *)&sio_com1,4);
+ /* setup Com2 port device 5 */
+ isa_write_table((SIO_LOGDEV_TABLE *)&sio_com2,5);
+ /* setup keyboards device 7 */
+ isa_write_table((SIO_LOGDEV_TABLE *)&sio_keyboard,7);
+}
+
+
+void isa_sio_setup(void)
+{
+ if(open_cfg_super_IO(SIO_CFG_PORT)==TRUE)
+ {
+ isa_sio_loadtable();
+ close_cfg_super_IO(0x3F0);
+ }
+}
+
+
+
+/******************************************************************************
+ * IRQ Controller
+ * we use the Vector mode
+ */
+
+struct isa_irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ int count;
+};
+
+static struct isa_irq_action isa_irqs[16];
+
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+static unsigned int cached_irq_mask = 0xffff;
+
+#define cached_imr1 (unsigned char)cached_irq_mask
+#define cached_imr2 (unsigned char)(cached_irq_mask>>8)
+#define IMR_1 CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_OCW1
+#define IMR_2 CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_OCW1
+#define ICW1_1 CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW1
+#define ICW1_2 CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW1
+#define ICW2_1 CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW2
+#define ICW2_2 CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW2
+#define ICW3_1 ICW2_1
+#define ICW3_2 ICW2_2
+#define ICW4_1 ICW2_1
+#define ICW4_2 ICW2_2
+#define ISR_1 ICW1_1
+#define ISR_2 ICW1_2
+
+
+void disable_8259A_irq(unsigned int irq)
+{
+ unsigned int mask = 1 << irq;
+
+ cached_irq_mask |= mask;
+ if (irq & 8)
+ out8(IMR_2,cached_imr2);
+ else
+ out8(IMR_1,cached_imr1);
+}
+
+void enable_8259A_irq(unsigned int irq)
+{
+ unsigned int mask = ~(1 << irq);
+
+ cached_irq_mask &= mask;
+ if (irq & 8)
+ out8(IMR_2,cached_imr2);
+ else
+ out8(IMR_1,cached_imr1);
+}
+/*
+int i8259A_irq_pending(unsigned int irq)
+{
+ unsigned int mask = 1<<irq;
+ int ret;
+
+ if (irq < 8)
+ ret = inb(0x20) & mask;
+ else
+ ret = inb(0xA0) & (mask >> 8);
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ return ret;
+}
+*/
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ */
+int i8259A_irq_real(unsigned int irq)
+{
+ int value;
+ int irqmask = 1<<irq;
+
+ if (irq < 8) {
+ out8(ISR_1,0x0B); /* ISR register */
+ value = in8(ISR_1) & irqmask;
+ out8(ISR_1,0x0A); /* back to the IRR register */
+ return value;
+ }
+ out8(ISR_2,0x0B); /* ISR register */
+ value = in8(ISR_2) & (irqmask >> 8);
+ out8(ISR_2,0x0A); /* back to the IRR register */
+ return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+void mask_and_ack_8259A(unsigned int irq)
+{
+ unsigned int irqmask = 1 << irq;
+ unsigned int temp_irqmask = cached_irq_mask;
+ /*
+ * Lightweight spurious IRQ detection. We do not want
+ * to overdo spurious IRQ handling - it's usually a sign
+ * of hardware problems, so we only do the checks we can
+ * do without slowing down good hardware unnecesserily.
+ *
+ * Note that IRQ7 and IRQ15 (the two spurious IRQs
+ * usually resulting from the 8259A-1|2 PICs) occur
+ * even if the IRQ is masked in the 8259A. Thus we
+ * can check spurious 8259A IRQs without doing the
+ * quite slow i8259A_irq_real() call for every IRQ.
+ * This does not cover 100% of spurious interrupts,
+ * but should be enough to warn the user that there
+ * is something bad going on ...
+ */
+ if (temp_irqmask & irqmask)
+ goto spurious_8259A_irq;
+ temp_irqmask |= irqmask;
+
+handle_real_irq:
+ if (irq & 8) {
+ in8(IMR_2); /* DUMMY - (do we need this?) */
+ out8(IMR_2,(unsigned char)(temp_irqmask>>8));
+ out8(ISR_2,0x60+(irq&7));/* 'Specific EOI' to slave */
+ out8(ISR_1,0x62); /* 'Specific EOI' to master-IRQ2 */
+ out8(IMR_2,cached_imr2); /* turn it on again */
+ } else {
+ in8(IMR_1); /* DUMMY - (do we need this?) */
+ out8(IMR_1,(unsigned char)temp_irqmask);
+ out8(ISR_1,0x60+irq); /* 'Specific EOI' to master */
+ out8(IMR_1,cached_imr1); /* turn it on again */
+ }
+
+ return;
+
+spurious_8259A_irq:
+ /*
+ * this is the slow path - should happen rarely.
+ */
+ if (i8259A_irq_real(irq))
+ /*
+ * oops, the IRQ _is_ in service according to the
+ * 8259A - not spurious, go handle it.
+ */
+ goto handle_real_irq;
+
+ {
+ static int spurious_irq_mask;
+ /*
+ * At this point we can be sure the IRQ is spurious,
+ * lets ACK and report it. [once per IRQ]
+ */
+ if (!(spurious_irq_mask & irqmask)) {
+ PRINTF("spurious 8259A interrupt: IRQ%d.\n", irq);
+ spurious_irq_mask |= irqmask;
+ }
+ /* irq_err_count++; */
+ /*
+ * Theoretically we do not have to handle this IRQ,
+ * but in Linux this does not cause problems and is
+ * simpler for us.
+ */
+ goto handle_real_irq;
+ }
+}
+
+void init_8259A(void)
+{
+ out8(IMR_1,0xff); /* mask all of 8259A-1 */
+ out8(IMR_2,0xff); /* mask all of 8259A-2 */
+
+ out8(ICW1_1,0x11); /* ICW1: select 8259A-1 init */
+ out8(ICW2_1,0x20 + 0); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+ out8(ICW3_1,0x04); /* 8259A-1 (the master) has a slave on IR2 */
+ out8(ICW4_1,0x01); /* master expects normal EOI */
+ out8(ICW1_2,0x11); /* ICW2: select 8259A-2 init */
+ out8(ICW2_2,0x20 + 8); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+ out8(ICW3_2,0x02); /* 8259A-2 is a slave on master's IR2 */
+ out8(ICW4_2,0x01); /* (slave's support for AEOI in flat mode
+ is to be investigated) */
+ udelay(10000); /* wait for 8259A to initialize */
+ out8(IMR_1,cached_imr1); /* restore master IRQ mask */
+ udelay(10000); /* wait for 8259A to initialize */
+ out8(IMR_2,cached_imr2); /* restore slave IRQ mask */
+}
+
+
+#define PCI_INT_ACK_ADDR 0xEED00000
+
+int handle_isa_int(void)
+{
+ unsigned long irqack;
+ unsigned char isr1,isr2,irq;
+ /* first we acknokledge the int via the PCI bus */
+ irqack=in32(PCI_INT_ACK_ADDR);
+ /* now we get the ISRs */
+ isr2=in8(ISR_2);
+ isr1=in8(ISR_1);
+ irq=(unsigned char)irqack;
+ if((irq==7)&&((isr1&0x80)==0)) {
+ PRINTF("IRQ7 detected but not in ISR\n");
+ }
+ else {
+ /* we should handle cascaded interrupts here also */
+ /* printf("ISA Irq %d\n",irq); */
+ isa_irqs[irq].count++;
+ if (isa_irqs[irq].handler != NULL)
+ (*isa_irqs[irq].handler)(isa_irqs[irq].arg); /* call isr */
+ else
+ {
+ PRINTF ("bogus interrupt vector 0x%x\n", irq);
+ }
+ }
+ /* issue EOI instruction to clear the IRQ */
+ mask_and_ack_8259A(irq);
+ return 0;
+}
+
+
+
+/******************************************************************
+ * Install and free an ISA interrupt handler.
+ */
+
+void isa_irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+ if (isa_irqs[vec].handler != NULL) {
+ printf ("ISA Interrupt vector %d: handler 0x%x replacing 0x%x\n",
+ vec, (uint)handler, (uint)isa_irqs[vec].handler);
+ }
+ isa_irqs[vec].handler = handler;
+ isa_irqs[vec].arg = arg;
+ enable_8259A_irq(vec);
+ PRINTF ("Install ISA IRQ %d ==> %p, @ %p mask=%04x\n", vec, handler, &isa_irqs[vec].handler,cached_irq_mask);
+
+}
+
+void isa_irq_free_handler(int vec)
+{
+ disable_8259A_irq(vec);
+ isa_irqs[vec].handler = NULL;
+ isa_irqs[vec].arg = NULL;
+ printf ("Free ISA IRQ %d mask=%04x\n", vec, cached_irq_mask);
+
+}
+
+/****************************************************************************/
+void isa_init_irq_contr(void)
+{
+ int i;
+ /* disable all Interrupts */
+ /* first write icws controller 1 */
+ for(i=0;i<16;i++)
+ {
+ isa_irqs[i].handler=NULL;
+ isa_irqs[i].arg=NULL;
+ isa_irqs[i].count=0;
+ }
+ init_8259A();
+ out8(IMR_2,0xFF);
+}
+
+
+/******************************************************************
+ * Init the ISA bus and devices.
+ */
+
+
+int isa_init(void)
+{
+ isa_sio_setup();
+ drv_isa_kbd_init();
+ return 0;
+}
+
+
+
diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c
new file mode 100644
index 0000000000..5b87cdb539
--- /dev/null
+++ b/board/mpl/common/kbd.c
@@ -0,0 +1,655 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Source partly derived from:
+ * linux/drivers/char/pc_keyb.c
+ *
+ *
+ */
+#include <common.h>
+#include <asm/processor.h>
+#include <devices.h>
+#include "isa.h"
+#include "kbd.h"
+
+
+unsigned char kbd_read_status(void);
+unsigned char kbd_read_input(void);
+void kbd_send_data(unsigned char data);
+void disable_8259A_irq(unsigned int irq);
+void enable_8259A_irq(unsigned int irq);
+
+/* used only by send_data - set by keyboard_interrupt */
+
+
+#undef KBG_DEBUG
+
+#ifdef KBG_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+#define KBD_STAT_KOBF 0x01
+#define KBD_STAT_IBF 0x02
+#define KBD_STAT_SYS 0x04
+#define KBD_STAT_CD 0x08
+#define KBD_STAT_LOCK 0x10
+#define KBD_STAT_MOBF 0x20
+#define KBD_STAT_TI_OUT 0x40
+#define KBD_STAT_PARERR 0x80
+
+#define KBD_INIT_TIMEOUT 1000 /* Timeout in ms for initializing the keyboard */
+#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */
+#define KBD_TIMEOUT 2000 /* Timeout in ms for keyboard command acknowledge */
+/*
+ * Keyboard Controller Commands
+ */
+
+#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
+#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
+#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
+#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */
+#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
+#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
+#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
+#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
+#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
+#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
+#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if
+ initiated by the auxiliary device */
+#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
+
+/*
+ * Keyboard Commands
+ */
+
+#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
+#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
+#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
+#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
+#define KBD_CMD_RESET 0xFF /* Reset */
+
+/*
+ * Keyboard Replies
+ */
+
+#define KBD_REPLY_POR 0xAA /* Power on reset */
+#define KBD_REPLY_ACK 0xFA /* Command ACK */
+#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
+
+/*
+ * Status Register Bits
+ */
+
+#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
+#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
+#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
+#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
+#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
+#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
+#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
+#define KBD_STAT_PERR 0x80 /* Parity error */
+
+#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
+
+/*
+ * Controller Mode Register Bits
+ */
+
+#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
+#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
+#define KBD_MODE_SYS 0x04 /* The system flag (?) */
+#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
+#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
+#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
+#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
+#define KBD_MODE_RFU 0x80
+
+
+#define KDB_DATA_PORT 0x60
+#define KDB_COMMAND_PORT 0x64
+
+#define LED_SCR 0x01 /* scroll lock led */
+#define LED_CAP 0x04 /* caps lock led */
+#define LED_NUM 0x02 /* num lock led */
+
+#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
+
+
+
+
+static volatile char kbd_buffer[KBD_BUFFER_LEN];
+static volatile int in_pointer = 0;
+static volatile int out_pointer = 0;
+
+
+static unsigned char num_lock = 0;
+static unsigned char caps_lock = 0;
+static unsigned char scroll_lock = 0;
+static unsigned char shift = 0;
+static unsigned char ctrl = 0;
+static unsigned char alt = 0;
+static unsigned char e0 = 0;
+static unsigned char leds = 0;
+
+#define DEVNAME "kbd"
+
+/* Simple translation table for the keys */
+
+static unsigned char kbd_plain_xlate[] = {
+ 0xff,0x1b, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=','\b','\t', /* 0x00 - 0x0f */
+ 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']','\r',0xff, 'a', 's', /* 0x10 - 0x1f */
+ 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';','\'', '`',0xff,'\\', 'z', 'x', 'c', 'v', /* 0x20 - 0x2f */
+ 'b', 'n', 'm', ',', '.', '/',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */
+ 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */
+ '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */
+ '\r',0xff,0xff
+ };
+
+static unsigned char kbd_shift_xlate[] = {
+ 0xff,0x1b, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+','\b','\t', /* 0x00 - 0x0f */
+ 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}','\r',0xff, 'A', 'S', /* 0x10 - 0x1f */
+ 'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',0xff, '|', 'Z', 'X', 'C', 'V', /* 0x20 - 0x2f */
+ 'B', 'N', 'M', '<', '>', '?',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */
+ 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */
+ '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */
+ '\r',0xff,0xff
+ };
+
+static unsigned char kbd_ctrl_xlate[] = {
+ 0xff,0x1b, '1',0x00, '3', '4', '5',0x1E, '7', '8', '9', '0',0x1F, '=','\b','\t', /* 0x00 - 0x0f */
+ 0x11,0x17,0x05,0x12,0x14,0x18,0x15,0x09,0x0f,0x10,0x1b,0x1d,'\n',0xff,0x01,0x13, /* 0x10 - 0x1f */
+ 0x04,0x06,0x08,0x09,0x0a,0x0b,0x0c, ';','\'', '~',0x00,0x1c,0x1a,0x18,0x03,0x16, /* 0x20 - 0x2f */
+ 0x02,0x0e,0x0d, '<', '>', '?',0xff,0xff,0xff,0x00,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */
+ 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */
+ '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */
+ '\r',0xff,0xff
+ };
+
+/******************************************************************
+ * Init
+ ******************************************************************/
+int isa_kbd_init(void)
+{
+ char* result;
+ result=kbd_initialize();
+ if(result==NULL) {
+ PRINTF("AT Keyboard initialized\n");
+ irq_install_handler(25, (interrupt_handler_t *)handle_isa_int, NULL);
+ isa_irq_install_handler(KBD_INTERRUPT, (interrupt_handler_t *)kbd_interrupt, NULL);
+ return (1);
+ }
+ else {
+ printf("%s\n",result);
+ return (-1);
+ }
+}
+
+#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+extern int overwrite_console (void);
+#else
+int overwrite_console (void)
+{
+ return (0);
+}
+#endif
+
+int drv_isa_kbd_init (void)
+{
+ int error;
+ device_t kbddev ;
+ char *stdinname = getenv ("stdin");
+
+ if(isa_kbd_init()==-1)
+ return -1;
+ memset (&kbddev, 0, sizeof(kbddev));
+ strcpy(kbddev.name, DEVNAME);
+ kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ kbddev.putc = NULL ;
+ kbddev.puts = NULL ;
+ kbddev.getc = kbd_getc ;
+ kbddev.tstc = kbd_testc ;
+
+ error = device_register (&kbddev);
+ if(error==0) {
+ /* check if this is the standard input device */
+ if(strcmp(stdinname,DEVNAME)==0) {
+ /* reassign the console */
+ if(overwrite_console()) {
+ return 1;
+ }
+ error=console_assign(stdin,DEVNAME);
+ if(error==0)
+ return 1;
+ else
+ return error;
+ }
+ return 1;
+ }
+ return error;
+}
+
+/******************************************************************
+ * Queue handling
+ ******************************************************************/
+/* puts character in the queue and sets up the in and out pointer */
+void kbd_put_queue(char data)
+{
+ if((in_pointer+1)==KBD_BUFFER_LEN) {
+ if(out_pointer==0) {
+ return; /* buffer full */
+ } else{
+ in_pointer=0;
+ }
+ } else {
+ if((in_pointer+1)==out_pointer)
+ return; /* buffer full */
+ in_pointer++;
+ }
+ kbd_buffer[in_pointer]=data;
+ return;
+}
+
+/* test if a character is in the queue */
+int kbd_testc(void)
+{
+ if(in_pointer==out_pointer)
+ return(0); /* no data */
+ else
+ return(1);
+}
+/* gets the character from the queue */
+int kbd_getc(void)
+{
+ char c;
+ while(in_pointer==out_pointer);
+ if((out_pointer+1)==KBD_BUFFER_LEN)
+ out_pointer=0;
+ else
+ out_pointer++;
+ c=kbd_buffer[out_pointer];
+ return (int)c;
+
+}
+
+
+/* set LEDs */
+
+void kbd_set_leds(void)
+{
+ if(caps_lock==0)
+ leds&=~LED_CAP; /* switch caps_lock off */
+ else
+ leds|=LED_CAP; /* switch on LED */
+ if(num_lock==0)
+ leds&=~LED_NUM; /* switch LED off */
+ else
+ leds|=LED_NUM; /* switch on LED */
+ if(scroll_lock==0)
+ leds&=~LED_SCR; /* switch LED off */
+ else
+ leds|=LED_SCR; /* switch on LED */
+ kbd_send_data(KBD_CMD_SET_LEDS);
+ kbd_send_data(leds);
+}
+
+
+void handle_keyboard_event(unsigned char scancode)
+{
+ unsigned char keycode;
+
+ /* Convert scancode to keycode */
+ PRINTF("scancode %x\n",scancode);
+ if(scancode==0xe0) {
+ e0=1; /* special charakters */
+ return;
+ }
+ if(e0==1) {
+ e0=0; /* delete flag */
+ if(!( ((scancode&0x7F)==0x38)|| /* the right ctrl key */
+ ((scancode&0x7F)==0x1D)|| /* the right alt key */
+ ((scancode&0x7F)==0x35)|| /* the right '/' key */
+ ((scancode&0x7F)==0x1C) )) /* the right enter key */
+ /* we swallow unknown e0 codes */
+ return;
+ }
+ /* special cntrl keys */
+ switch(scancode)
+ {
+ case 0x2A:
+ case 0x36: /* shift pressed */
+ shift=1;
+ return; /* do nothing else */
+ case 0xAA:
+ case 0xB6: /* shift released */
+ shift=0;
+ return; /* do nothing else */
+ case 0x38: /* alt pressed */
+ alt=1;
+ return; /* do nothing else */
+ case 0xB8: /* alt released */
+ alt=0;
+ return; /* do nothing else */
+ case 0x1d: /* ctrl pressed */
+ ctrl=1;
+ return; /* do nothing else */
+ case 0x9d: /* ctrl released */
+ ctrl=0;
+ return; /* do nothing else */
+ case 0x46: /* scrollock pressed */
+ scroll_lock=~scroll_lock;
+ kbd_set_leds();
+ return; /* do nothing else */
+ case 0x3A: /* capslock pressed */
+ caps_lock=~caps_lock;
+ kbd_set_leds();
+ return;
+ case 0x45: /* numlock pressed */
+ num_lock=~num_lock;
+ kbd_set_leds();
+ return;
+ case 0xC6: /* scroll lock released */
+ case 0xC5: /* num lock released */
+ case 0xBA: /* caps lock released */
+ return; /* just swallow */
+ }
+ if((scancode&0x80)==0x80) /* key released */
+ return;
+ /* now, decide which table we need */
+ if(scancode > (sizeof(kbd_plain_xlate)/sizeof(kbd_plain_xlate[0]))) { /* scancode not in list */
+ PRINTF("unkown scancode %X\n",scancode);
+ return; /* swallow it */
+ }
+ /* setup plain code first */
+ keycode=kbd_plain_xlate[scancode];
+ if(caps_lock==1) { /* caps_lock is pressed, overwrite plain code */
+ if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
+ PRINTF("unkown caps-locked scancode %X\n",scancode);
+ return; /* swallow it */
+ }
+ keycode=kbd_shift_xlate[scancode];
+ if(keycode<'A') { /* we only want the alphas capital */
+ keycode=kbd_plain_xlate[scancode];
+ }
+ }
+ if(shift==1) { /* shift overwrites caps_lock */
+ if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
+ PRINTF("unkown shifted scancode %X\n",scancode);
+ return; /* swallow it */
+ }
+ keycode=kbd_shift_xlate[scancode];
+ }
+ if(ctrl==1) { /* ctrl overwrites caps_lock and shift */
+ if(scancode > (sizeof(kbd_ctrl_xlate)/sizeof(kbd_ctrl_xlate[0]))) { /* scancode not in list */
+ PRINTF("unkown ctrl scancode %X\n",scancode);
+ return; /* swallow it */
+ }
+ keycode=kbd_ctrl_xlate[scancode];
+ }
+ /* check if valid keycode */
+ if(keycode==0xff) {
+ PRINTF("unkown scancode %X\n",scancode);
+ return; /* swallow unknown codes */
+ }
+
+ kbd_put_queue(keycode);
+ PRINTF("%x\n",keycode);
+}
+
+/*
+ * This reads the keyboard status port, and does the
+ * appropriate action.
+ *
+ */
+unsigned char handle_kbd_event(void)
+{
+ unsigned char status = kbd_read_status();
+ unsigned int work = 10000;
+
+ while ((--work > 0) && (status & KBD_STAT_OBF)) {
+ unsigned char scancode;
+
+ scancode = kbd_read_input();
+
+ /* Error bytes must be ignored to make the
+ Synaptics touchpads compaq use work */
+ /* Ignore error bytes */
+ if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR)))
+ {
+ if (status & KBD_STAT_MOUSE_OBF)
+ ; /* not supported: handle_mouse_event(scancode); */
+ else
+ handle_keyboard_event(scancode);
+ }
+ status = kbd_read_status();
+ }
+ if (!work)
+ PRINTF("pc_keyb: controller jammed (0x%02X).\n", status);
+ return status;
+}
+
+
+
+/******************************************************************************
+ * Lowlevel Part of keyboard section
+ */
+unsigned char kbd_read_status(void)
+{
+ return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
+}
+
+unsigned char kbd_read_input(void)
+{
+ return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
+}
+
+void kbd_write_command(unsigned char cmd)
+{
+ out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
+}
+
+void kbd_write_output(unsigned char data)
+{
+ out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
+}
+
+int kbd_read_data(void)
+{
+ int val;
+ unsigned char status;
+
+ val=-1;
+ status = kbd_read_status();
+ if (status & KBD_STAT_OBF) {
+ val = kbd_read_input();
+ if (status & (KBD_STAT_GTO | KBD_STAT_PERR))
+ val = -2;
+ }
+ return val;
+}
+
+int kbd_wait_for_input(void)
+{
+ unsigned long timeout;
+ int val;
+
+ timeout = KBD_TIMEOUT;
+ val=kbd_read_data();
+ while(val < 0)
+ {
+ if(timeout--==0)
+ return -1;
+ udelay(1000);
+ val=kbd_read_data();
+ }
+ return val;
+}
+
+
+int kb_wait(void)
+{
+ unsigned long timeout = KBC_TIMEOUT * 10;
+
+ do {
+ unsigned char status = handle_kbd_event();
+ if (!(status & KBD_STAT_IBF))
+ return 0; /* ok */
+ udelay(1000);
+ timeout--;
+ } while (timeout);
+ return 1;
+}
+
+void kbd_write_command_w(int data)
+{
+ if(kb_wait())
+ PRINTF("timeout in kbd_write_command_w\n");
+ kbd_write_command(data);
+}
+
+void kbd_write_output_w(int data)
+{
+ if(kb_wait())
+ PRINTF("timeout in kbd_write_output_w\n");
+ kbd_write_output(data);
+}
+
+void kbd_send_data(unsigned char data)
+{
+ unsigned char status;
+ disable_8259A_irq(1); /* disable interrupt */
+ kbd_write_output_w(data);
+ status = kbd_wait_for_input();
+ if (status == KBD_REPLY_ACK)
+ enable_8259A_irq(1); /* enable interrupt */
+}
+
+
+char * kbd_initialize(void)
+{
+ int status;
+
+ in_pointer = 0; /* delete in Buffer */
+ out_pointer = 0;
+ /*
+ * Test the keyboard interface.
+ * This seems to be the only way to get it going.
+ * If the test is successful a x55 is placed in the input buffer.
+ */
+ kbd_write_command_w(KBD_CCMD_SELF_TEST);
+ if (kbd_wait_for_input() != 0x55)
+ return "Kbd: failed self test";
+ /*
+ * Perform a keyboard interface test. This causes the controller
+ * to test the keyboard clock and data lines. The results of the
+ * test are placed in the input buffer.
+ */
+ kbd_write_command_w(KBD_CCMD_KBD_TEST);
+ if (kbd_wait_for_input() != 0x00)
+ return "Kbd: interface failed self test";
+ /*
+ * Enable the keyboard by allowing the keyboard clock to run.
+ */
+ kbd_write_command_w(KBD_CCMD_KBD_ENABLE);
+ status = kbd_wait_for_input();
+ /*
+ * Reset keyboard. If the read times out
+ * then the assumption is that no keyboard is
+ * plugged into the machine.
+ * This defaults the keyboard to scan-code set 2.
+ *
+ * Set up to try again if the keyboard asks for RESEND.
+ */
+ do {
+ kbd_write_output_w(KBD_CMD_RESET);
+ status = kbd_wait_for_input();
+ if (status == KBD_REPLY_ACK)
+ break;
+ if (status != KBD_REPLY_RESEND)
+ {
+ PRINTF("status: %X\n",status);
+ return "Kbd: reset failed, no ACK";
+ }
+ } while (1);
+ if (kbd_wait_for_input() != KBD_REPLY_POR)
+ return "Kbd: reset failed, no POR";
+
+ /*
+ * Set keyboard controller mode. During this, the keyboard should be
+ * in the disabled state.
+ *
+ * Set up to try again if the keyboard asks for RESEND.
+ */
+ do {
+ kbd_write_output_w(KBD_CMD_DISABLE);
+ status = kbd_wait_for_input();
+ if (status == KBD_REPLY_ACK)
+ break;
+ if (status != KBD_REPLY_RESEND)
+ return "Kbd: disable keyboard: no ACK";
+ } while (1);
+
+ kbd_write_command_w(KBD_CCMD_WRITE_MODE);
+ kbd_write_output_w(KBD_MODE_KBD_INT
+ | KBD_MODE_SYS
+ | KBD_MODE_DISABLE_MOUSE
+ | KBD_MODE_KCC);
+
+ /* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+ kbd_write_command_w(KBD_CCMD_READ_MODE);
+ if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
+ /*
+ * If the controller does not support conversion,
+ * Set the keyboard to scan-code set 1.
+ */
+ kbd_write_output_w(0xF0);
+ kbd_wait_for_input();
+ kbd_write_output_w(0x01);
+ kbd_wait_for_input();
+ }
+ kbd_write_output_w(KBD_CMD_ENABLE);
+ if (kbd_wait_for_input() != KBD_REPLY_ACK)
+ return "Kbd: enable keyboard: no ACK";
+
+ /*
+ * Finally, set the typematic rate to maximum.
+ */
+ kbd_write_output_w(KBD_CMD_SET_RATE);
+ if (kbd_wait_for_input() != KBD_REPLY_ACK)
+ return "Kbd: Set rate: no ACK";
+ kbd_write_output_w(0x00);
+ if (kbd_wait_for_input() != KBD_REPLY_ACK)
+ return "Kbd: Set rate: no ACK";
+ return NULL;
+}
+
+void kbd_interrupt(void)
+{
+ handle_kbd_event();
+}
+
+
+
+/* eof */
+
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
new file mode 100644
index 0000000000..83624a9dae
--- /dev/null
+++ b/board/mpl/common/usb_uhci.c
@@ -0,0 +1,1152 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: Part of this code has been derived from linux
+ *
+ */
+
+/**********************************************************************
+ * How it works:
+ * -------------
+ * The framelist / Transfer descriptor / Queue Heads are similar like
+ * in the linux usb_uhci.c.
+ *
+ * During initialization, the following skeleton is allocated in init_skel:
+ *
+ * framespecific | common chain
+ *
+ * framelist[]
+ * [ 0 ]-----> TD ---------\
+ * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
+ * ... TD ---------/
+ * [1023]-----> TD --------/
+ *
+ * ^^ ^^ ^^ ^^ ^^
+ * 7 TDs for 1 TD for Start of Start of End Chain
+ * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
+ *
+ *
+ * Since this is a bootloader, the isochronous transfer descriptor have been removed.
+ *
+ * Interrupt Transfers.
+ * --------------------
+ * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * will be inserted after the appropriate (depending the interval setting) skeleton TD.
+ * If an interrupt has been detected the dev->irqhandler is called. The status and number
+ * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
+ * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
+ * the interrupt TD will be reactivated.
+ *
+ * Control Transfers
+ * -----------------
+ * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
+ * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
+ * the programm has to wait for completion. This does not allows asynchronous data transfer.
+ *
+ * Bulk Transfers
+ * --------------
+ * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
+ * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
+ * the programm has to wait for completion. This does not allows asynchronous data transfer.
+ *
+ *
+ */
+
+#include <common.h>
+#include <pci.h>
+
+#ifdef CONFIG_USB_UHCI
+
+#include <usb.h>
+#include "usb_uhci.h"
+
+#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
+#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
+
+
+#undef USB_UHCI_DEBUG
+
+#ifdef USB_UHCI_DEBUG
+#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define USB_UHCI_PRINTF(fmt,args...)
+#endif
+
+
+static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */
+unsigned int usb_base_addr; /* base address */
+
+static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */
+static uhci_qh_t qh_cntrl; /* control Queue Head */
+static uhci_qh_t qh_bulk; /* bulk Queue Head */
+static uhci_qh_t qh_end; /* end Queue Head */
+static uhci_td_t td_last; /* last TD (linked with end chain) */
+
+/* temporary tds */
+static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */
+static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */
+
+static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */
+
+static struct virt_root_hub rh; /* struct for root hub */
+
+/**********************************************************************
+ * some forward decleration
+ */
+int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,struct devrequest *setup);
+
+/* fill a td with the approproiate data. Link, status, info and buffer
+ * are used by the USB controller itselfes, dev is used to identify the
+ * "connected" device
+ */
+void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status,
+ unsigned long info, unsigned long buffer, unsigned long dev)
+{
+ td->link=swap_32(link);
+ td->status=swap_32(status);
+ td->info=swap_32(info);
+ td->buffer=swap_32(buffer);
+ td->dev_ptr=dev;
+}
+
+/* fill a qh with the approproiate data. Head and element are used by the USB controller
+ * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
+ * Please note, that after completion of the td chain, the entry element is removed /
+ * marked invalid by the USB controller.
+ */
+void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element)
+{
+ qh->head=swap_32(head);
+ qh->element=swap_32(element);
+ qh->dev_ptr=0L;
+}
+
+/* get the status of a td->status
+ */
+unsigned long usb_uhci_td_stat(unsigned long status)
+{
+ unsigned long result=0;
+ result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
+ result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
+ result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
+ result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
+ result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
+ result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
+ result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
+ return result;
+}
+
+/* get the status and the transfered len of a td chain.
+ * called from the completion handler
+ */
+int usb_get_td_status(uhci_td_t *td,struct usb_device *dev)
+{
+ unsigned long temp,info;
+ unsigned long stat;
+ uhci_td_t *mytd=td;
+
+ if(dev->devnum==rh.devnum)
+ return 0;
+ dev->act_len=0;
+ stat=0;
+ do {
+ temp=swap_32((unsigned long)mytd->status);
+ stat=usb_uhci_td_stat(temp);
+ info=swap_32((unsigned long)mytd->info);
+ if(((info & 0xff)!= USB_PID_SETUP) &&
+ (((info >> 21) & 0x7ff)!= 0x7ff) &&
+ (temp & 0x7FF)!=0x7ff)
+ { /* if not setup and not null data pack */
+ dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
+ }
+ if(stat) { /* status no ok */
+ dev->status=stat;
+ return -1;
+ }
+ temp=swap_32((unsigned long)mytd->link);
+ mytd=(uhci_td_t *)(temp & 0xfffffff0);
+ }while((temp & 0x1)==0); /* process all TDs */
+ dev->status=stat;
+ return 0; /* Ok */
+}
+
+
+/*-------------------------------------------------------------------
+ * LOW LEVEL STUFF
+ * assembles QHs und TDs for control, bulk and iso
+ *-------------------------------------------------------------------*/
+
+/* Submits a control message. That is a Setup, Data and Status transfer.
+ * Routine does not wait for completion.
+ */
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len,struct devrequest *setup)
+{
+ unsigned long destination, status;
+ int maxsze = usb_maxpacket(dev, pipe);
+ unsigned long dataptr;
+ int len;
+ int pktsze;
+ int i=0;
+
+ if (!maxsze) {
+ USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe);
+ return -1;
+ }
+ if(((pipe>>8)&0x7f)==rh.devnum) {
+ /* this is the root hub -> redirect it */
+ return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup);
+ }
+ USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze);
+ /* The "pipe" thing contains the destination in bits 8--18 */
+ destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
+ /* 3 errors */
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
+ /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
+ /* Build the TD for the control request, try forever, 8 bytes of data */
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev);
+#if 0
+ {
+ char *sp=(char *)setup;
+ printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
+ sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]);
+ }
+#endif
+ dataptr = (unsigned long)buffer;
+ len=transfer_len;
+
+ /* If direction is "send", change the frame from SETUP (0x2D)
+ to OUT (0xE1). Else change it from SETUP to IN (0x69). */
+ destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN);
+ while (len > 0) {
+ /* data stage */
+ pktsze = len;
+ i++;
+ if (pktsze > maxsze)
+ pktsze = maxsze;
+ destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
+ tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
+
+ dataptr += pktsze;
+ len -= pktsze;
+ }
+
+ /* Build the final TD for control status */
+ /* It's only IN if the pipe is out AND we aren't expecting data */
+
+ destination &= ~UHCI_PID;
+ if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0))
+ destination |= USB_PID_IN;
+ else
+ destination |= USB_PID_OUT;
+ destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */
+ i++;
+ status &=~TD_CTRL_SPD;
+ /* no limit on errors on final packet , 0 bytes of data */
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev);
+ tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */
+ /* usb_show_td(i+1);*/
+ USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i);
+ /* first mark the control QH element terminated */
+ qh_cntrl.element=0xffffffffL;
+ /* set qh active */
+ qh_cntrl.dev_ptr=(unsigned long)dev;
+ /* fill in tmp_td_chain */
+ qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]);
+ return 0;
+}
+
+/*-------------------------------------------------------------------
+ * Prepare TDs for bulk transfers.
+ */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len)
+{
+ unsigned long destination, status,info;
+ unsigned long dataptr;
+ int maxsze = usb_maxpacket(dev, pipe);
+ int len;
+ int i=0;
+
+ if(transfer_len < 0) {
+ printf("Negative transfer length in submit_bulk\n");
+ return -1;
+ }
+ if (!maxsze)
+ return -1;
+ /* The "pipe" thing contains the destination in bits 8--18. */
+ destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe);
+ /* 3 errors */
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
+ /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
+ /* Build the TDs for the bulk request */
+ len = transfer_len;
+ dataptr = (unsigned long)buffer;
+ do {
+ int pktsze = len;
+ if (pktsze > maxsze)
+ pktsze = maxsze;
+ /* pktsze bytes of data */
+ info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) |
+ (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE);
+
+ if((len-pktsze)==0)
+ status |= TD_CTRL_IOC; /* last one generates INT */
+
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
+ if(i>0)
+ tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
+ i++;
+ dataptr += pktsze;
+ len -= pktsze;
+ usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
+ } while (len > 0);
+ /* first mark the bulk QH element terminated */
+ qh_bulk.element=0xffffffffL;
+ /* set qh active */
+ qh_bulk.dev_ptr=(unsigned long)dev;
+ /* fill in tmp_td_chain */
+ qh_bulk.element=swap_32((unsigned long)&tmp_td[0]);
+ return 0;
+}
+
+
+/* search a free interrupt td
+ */
+uhci_td_t *uhci_alloc_int_td(void)
+{
+ int i;
+ for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
+ if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */
+ return &tmp_int_td[i];
+ }
+ return NULL;
+}
+
+#if 0
+void uhci_show_temp_int_td(void)
+{
+ int i;
+ for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
+ if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */
+ printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr);
+ }
+ printf("all others temp_tds are free\n");
+}
+#endif
+/*-------------------------------------------------------------------
+ * submits USB interrupt (ie. polling ;-)
+ */
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval)
+{
+ int nint, n;
+ unsigned long status, destination;
+ unsigned long info,tmp;
+ uhci_td_t *mytd;
+ if (interval < 0 || interval >= 256)
+ return -1;
+
+ if (interval == 0)
+ nint = 0;
+ else {
+ for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */
+ {
+ if(interval < n) {
+ interval = n / 2;
+ break;
+ }
+ }
+ nint--;
+ }
+
+ USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint);
+ mytd=uhci_alloc_int_td();
+ if(mytd==NULL) {
+ printf("No free INT TDs found\n");
+ return -1;
+ }
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
+/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
+*/
+
+ destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21);
+
+ info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
+ tmp = swap_32(td_int[nint].link);
+ usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev);
+ /* Link it */
+ tmp = swap_32((unsigned long)mytd);
+ td_int[nint].link=tmp;
+
+ usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
+
+ return 0;
+}
+
+/**********************************************************************
+ * Low Level functions
+ */
+
+
+void reset_hc(void)
+{
+
+ /* Global reset for 100ms */
+ out16r( usb_base_addr + USBPORTSC1,0x0204);
+ out16r( usb_base_addr + USBPORTSC2,0x0204);
+ out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS);
+ /* Turn off all interrupts */
+ out16r(usb_base_addr + USBINTR,0);
+ wait_ms(50);
+ out16r( usb_base_addr + USBCMD,0);
+ wait_ms(10);
+}
+
+void start_hc(void)
+{
+ int timeout = 1000;
+
+ while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
+ if (!--timeout) {
+ printf("USBCMD_HCRESET timed out!\n");
+ break;
+ }
+ }
+ /* Turn on all interrupts */
+ out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
+ /* Start at frame 0 */
+ out16r(usb_base_addr + USBFRNUM,0);
+ /* set Framebuffer base address */
+ out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist);
+ /* Run and mark it configured with a 64-byte max packet */
+ out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
+}
+
+/* Initialize the skeleton
+ */
+void usb_init_skel(void)
+{
+ unsigned long temp;
+ int n;
+
+ for(n=0;n<USB_MAX_TEMP_INT_TD;n++)
+ tmp_int_td[n].dev_ptr=0L; /* no devices connected */
+ /* last td */
+ usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L);
+ /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
+ /* End Queue Header */
+ usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last);
+ /* Bulk Queue Header */
+ temp=(unsigned long)&qh_end;
+ usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM);
+ /* Control Queue Header */
+ temp=(unsigned long)&qh_bulk;
+ usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM);
+ /* 1ms Interrupt td */
+ temp=(unsigned long)&qh_cntrl;
+ usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L);
+ temp=(unsigned long)&td_int[0];
+ for(n=1; n<8; n++)
+ usb_fill_td(&td_int[n],temp,0,0,0,0L);
+ for (n = 0; n < 1024; n++) {
+ /* link all framelist pointers to one of the interrupts */
+ int m, o;
+ if ((n&127)==127)
+ framelist[n]= swap_32((unsigned long)&td_int[0]);
+ else
+ for (o = 1, m = 2; m <= 128; o++, m += m)
+ if ((n & (m - 1)) == ((m - 1) / 2))
+ framelist[n]= swap_32((unsigned long)&td_int[o]);
+ }
+}
+
+/* check the common skeleton for completed transfers, and update the status
+ * of the "connected" device. Called from the IRQ routine.
+ */
+void usb_check_skel(void)
+{
+ struct usb_device *dev;
+ /* start with the control qh */
+ if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
+ {
+ dev=(struct usb_device *)qh_cntrl.dev_ptr;
+ usb_get_td_status(&tmp_td[0],dev); /* update status */
+ if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
+ qh_cntrl.dev_ptr=0;
+ }
+ }
+ /* now process the bulk */
+ if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
+ {
+ dev=(struct usb_device *)qh_bulk.dev_ptr;
+ usb_get_td_status(&tmp_td[0],dev); /* update status */
+ if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
+ qh_bulk.dev_ptr=0;
+ }
+ }
+}
+
+/* check the interrupt chain, ubdate the status of the appropriate device,
+ * call the appropriate irqhandler and reactivate the TD if the irqhandler
+ * returns with 1
+ */
+void usb_check_int_chain(void)
+{
+ int i,res;
+ unsigned long link,status;
+ struct usb_device *dev;
+ uhci_td_t *td,*prevtd;
+
+ for(i=0;i<8;i++) {
+ prevtd=&td_int[i]; /* the first previous td is the skeleton td */
+ link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
+ td=(uhci_td_t *)link; /* assign it */
+ /* all interrupt TDs are finally linked to the td_int[0].
+ * so we process all until we find the td_int[0].
+ * if int0 chain points to a QH, we're also done
+ */
+ while(((i>0) && (link != (unsigned long)&td_int[0])) ||
+ ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH)))
+ {
+ /* check if a device is assigned with this td */
+ status=swap_32(td->status);
+ if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) {
+ /* td is not active and a device is assigned -> call irqhandler */
+ dev=(struct usb_device *)td->dev_ptr;
+ dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
+ dev->irq_status=usb_uhci_td_stat(status); /* get status */
+ res=dev->irq_handle(dev); /* call irqhandler */
+ if(res==1) {
+ /* reactivate */
+ status|=TD_CTRL_ACTIVE;
+ td->status=swap_32(status);
+ prevtd=td; /* previous td = this td */
+ }
+ else {
+ prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */
+ /* remove device pointer */
+ td->dev_ptr=0L;
+ }
+ } /* if we call the irq handler */
+ link=swap_32(td->link) & 0xfffffff0; /* next in chain */
+ td=(uhci_td_t *)link; /* assign it */
+ } /* process all td in this int chain */
+ } /* next interrupt chain */
+}
+
+
+/* usb interrupt service routine.
+ */
+void handle_usb_interrupt(void)
+{
+ unsigned short status;
+
+ /*
+ * Read the interrupt status, and write it back to clear the
+ * interrupt cause
+ */
+
+ status = in16r(usb_base_addr + USBSTS);
+
+ if (!status) /* shared interrupt, not mine */
+ return;
+ if (status != 1) {
+ /* remove host controller halted state */
+ if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) {
+ out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD));
+ }
+ }
+ usb_check_int_chain(); /* call interrupt handlers for int tds */
+ usb_check_skel(); /* call completion handler for common transfer routines */
+ out16r(usb_base_addr+USBSTS,status);
+}
+
+
+/* init uhci
+ */
+int usb_lowlevel_init(void)
+{
+ unsigned char temp;
+ int busdevfunc;
+
+ busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */
+ if(busdevfunc==-1) {
+ printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID);
+ return -1;
+ }
+ pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp);
+ irqvec = temp;
+ irq_free_handler(irqvec);
+ USB_UHCI_PRINTF("Interrupt Line = %d, is %d\n",irqvec);
+ pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp);
+ USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp);
+ pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
+ USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
+ usb_base_addr&=0xFFFFFFF0;
+ usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+ rh.devnum = 0;
+ usb_init_skel();
+ reset_hc();
+ start_hc();
+ irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL);
+ return 0;
+}
+
+/* stop uhci
+ */
+int usb_lowlevel_stop(void)
+{
+ if(irqvec==-1)
+ return 1;
+ irq_free_handler(irqvec);
+ reset_hc();
+ irqvec=-1;
+ return 0;
+}
+
+/*******************************************************************************************
+ * Virtual Root Hub
+ * Since the uhci does not have a real HUB, we simulate one ;-)
+ */
+#undef USB_RH_DEBUG
+
+#ifdef USB_RH_DEBUG
+#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args)
+static void usb_display_wValue(unsigned short wValue,unsigned short wIndex);
+static void usb_display_Req(unsigned short req);
+#else
+#define USB_RH_PRINTF(fmt,args...)
+static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {}
+static void usb_display_Req(unsigned short req) {}
+#endif
+
+static unsigned char root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, /* __u16 bcdUSB; v1.0 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x01, /* __u8 iManufacturer; */
+ 0x00, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static unsigned char root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+
+static unsigned char root_hub_hub_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00,
+ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
+ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'U', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+
+/*
+ * Root Hub Control Pipe (interrupt Pipes are not supported)
+ */
+
+
+int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd)
+{
+ void *data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int status = 0;
+ int stat = 0;
+ int i;
+
+ unsigned short cstatus;
+
+ unsigned short bmRType_bReq;
+ unsigned short wValue;
+ unsigned short wIndex;
+ unsigned short wLength;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ printf("Root-Hub submit IRQ: NOT implemented\n");
+#if 0
+ uhci->rh.urb = urb;
+ uhci->rh.send = 1;
+ uhci->rh.interval = urb->interval;
+ rh_init_int_timer (urb);
+#endif
+ return 0;
+ }
+ bmRType_bReq = cmd->requesttype | cmd->request << 8;
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+ usb_display_Req(bmRType_bReq);
+ for (i = 0; i < 8; i++)
+ rh.c_p_r[i] = 0;
+ USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
+ dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(unsigned short *) data = swap_16(1);
+ len=2;
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(unsigned short *) data = swap_16(0);
+ len=2;
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(unsigned short *) data = swap_16(0);
+ len=2;
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ *(unsigned long *) data = swap_32(0);
+ len=4;
+ break; /* hub power ** */
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+
+ status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
+ cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
+ ((status & USBPORTSC_PEC) >> (3 - 1)) |
+ (rh.c_p_r[wIndex - 1] << (0 + 4));
+ status = (status & USBPORTSC_CCS) |
+ ((status & USBPORTSC_PE) >> (2 - 1)) |
+ ((status & USBPORTSC_SUSP) >> (12 - 2)) |
+ ((status & USBPORTSC_PR) >> (9 - 4)) |
+ (1 << 8) | /* power on ** */
+ ((status & USBPORTSC_LSDA) << (-8 + 9));
+
+ *(unsigned short *) data = swap_16(status);
+ *(unsigned short *) (data + 2) = swap_16(cstatus);
+ len=4;
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL):
+ len=0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case (RH_C_HUB_OVER_CURRENT):
+ len=0; /* hub power over current ** */
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ usb_display_wValue(wValue,wIndex);
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) & ~USBPORTSC_PE;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_SUSPEND):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) & ~USBPORTSC_SUSP;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_POWER):
+ len=0; /* port power ** */
+ break;
+ case (RH_C_PORT_CONNECTION):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_CSC;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_C_PORT_ENABLE):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_PEC;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_C_PORT_SUSPEND):
+/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
+ len=0;
+ break;
+ case (RH_C_PORT_OVER_CURRENT):
+ len=0;
+ break;
+ case (RH_C_PORT_RESET):
+ rh.c_p_r[wIndex - 1] = 0;
+ len=0;
+ break;
+ }
+ break;
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ usb_display_wValue(wValue,wIndex);
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_SUSP;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_RESET):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_PR;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ wait_ms(10);
+ status = (status & 0xfff5) & ~USBPORTSC_PR;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ udelay(10);
+ status = (status & 0xfff5) | USBPORTSC_PE;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ wait_ms(10);
+ status = (status & 0xfff5) | 0xa;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_POWER):
+ len=0; /* port power ** */
+ break;
+ case (RH_PORT_ENABLE):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_PE;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ }
+ break;
+
+ case RH_SET_ADDRESS:
+ rh.devnum = wValue;
+ len=0;
+ break;
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ i=sizeof(root_hub_config_des);
+ status=i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_dev_des, len);
+ break;
+ case (0x02): /* configuration descriptor */
+ i=sizeof(root_hub_config_des);
+ status=i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_config_des, len);
+ break;
+ case (0x03): /*string descriptors */
+ if(wValue==0x0300) {
+ i=sizeof(root_hub_str_index0);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_str_index0, len);
+ break;
+ }
+ if(wValue==0x0301) {
+ i=sizeof(root_hub_str_index1);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_str_index1, len);
+ break;
+ }
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ root_hub_hub_des[2] = 2;
+ i=sizeof(root_hub_hub_des);
+ status= i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_hub_des, len);
+ break;
+ case RH_GET_CONFIGURATION:
+ *(unsigned char *) data = 0x01;
+ len = 1;
+ break;
+ case RH_SET_CONFIGURATION:
+ len=0;
+ break;
+ default:
+ stat = USB_ST_STALLED;
+ }
+ USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat,
+ in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2));
+ dev->act_len=len;
+ dev->status=stat;
+ return stat;
+
+}
+
+/********************************************************************************
+ * Some Debug Routines
+ */
+
+#ifdef USB_RH_DEBUG
+
+static void usb_display_Req(unsigned short req)
+{
+ USB_RH_PRINTF("- Root-Hub Request: ");
+ switch (req) {
+ case RH_GET_STATUS:
+ USB_RH_PRINTF("Get Status ");
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ USB_RH_PRINTF("Get Status Interface ");
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ USB_RH_PRINTF("Get Status Endpoint ");
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ USB_RH_PRINTF("Get Status Class");
+ break; /* hub power ** */
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Get Status Class Others");
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ USB_RH_PRINTF("Clear Feature Endpoint ");
+ break;
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ USB_RH_PRINTF("Clear Feature Class ");
+ break;
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Clear Feature Other Class ");
+ break;
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Set Feature Other Class ");
+ break;
+ case RH_SET_ADDRESS:
+ USB_RH_PRINTF("Set Address ");
+ break;
+ case RH_GET_DESCRIPTOR:
+ USB_RH_PRINTF("Get Descriptor ");
+ break;
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ USB_RH_PRINTF("Get Descriptor Class ");
+ break;
+ case RH_GET_CONFIGURATION:
+ USB_RH_PRINTF("Get Configuration ");
+ break;
+ case RH_SET_CONFIGURATION:
+ USB_RH_PRINTF("Get Configuration ");
+ break;
+ default:
+ USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req);
+ }
+ USB_RH_PRINTF("\n");
+
+}
+
+static void usb_display_wValue(unsigned short wValue,unsigned short wIndex)
+{
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex);
+ break;
+ case (RH_PORT_SUSPEND):
+ USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex);
+ break;
+ case (RH_PORT_POWER):
+ USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex);
+ break;
+ case (RH_C_PORT_CONNECTION):
+ USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_ENABLE):
+ USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_SUSPEND):
+ USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_OVER_CURRENT):
+ USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_RESET):
+ USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex);
+ break;
+ default:
+ USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex);
+ break;
+ }
+}
+
+#endif
+
+
+
+#ifdef USB_UHCI_DEBUG
+
+static int usb_display_td(uhci_td_t *td)
+{
+ unsigned long tmp;
+ int valid;
+
+ printf("TD at %p:\n",td);
+
+ tmp=swap_32(td->link);
+ printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0,
+ ((tmp & 0x4)==0x4) ? "Depth" : "Breath",
+ ((tmp & 0x2)==0x2) ? "QH" : "TD",
+ ((tmp & 0x1)==0x1) ? "invalid" : "valid");
+ valid=((tmp & 0x1)==0x0);
+ tmp=swap_32(td->status);
+ printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n",
+ (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable",
+ ((tmp>>28)&0x3),
+ (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed",
+ (((tmp>>25)&0x1)==0x1) ? "ISO " : "",
+ (((tmp>>24)&0x1)==0x1) ? "IOC " : "",
+ (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ",
+ (((tmp>>22)&0x1)==0x1) ? "Stalled" : "",
+ (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "",
+ (((tmp>>20)&0x1)==0x1) ? "Babble" : "",
+ (((tmp>>19)&0x1)==0x1) ? "NAK" : "",
+ (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "",
+ (tmp&0x7ff));
+ tmp=swap_32(td->info);
+ printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF));
+ printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "",
+ ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF);
+ tmp=swap_32(td->buffer);
+ printf(" Buffer 0x%08lX\n",tmp);
+ printf(" DEV %08lX\n",td->dev_ptr);
+ return valid;
+}
+
+
+void usb_show_td(int max)
+{
+ int i;
+ if(max>0) {
+ for(i=0;i<max;i++) {
+ usb_display_td(&tmp_td[i]);
+ }
+ }
+ else {
+ i=0;
+ do {
+ printf("tmp_td[%d]\n",i);
+ }while(usb_display_td(&tmp_td[i++]));
+ }
+}
+
+
+#endif
+#endif /* CONFIG_USB_UHCI */
+
+/* EOF */
diff --git a/board/musenki/flash.c b/board/musenki/flash.c
new file mode 100644
index 0000000000..a0a038f753
--- /dev/null
+++ b/board/musenki/flash.c
@@ -0,0 +1,513 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, uchar *dest, uchar data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+
+
+/*
+ * don't ask. its stupid, but more than one soul has had to live with this mistake
+ * "swaptab[i]" is the value of "i" with the bits reversed.
+ */
+
+#define MUSENKI_BROKEN_FLASH 1
+
+#ifdef MUSENKI_BROKEN_FLASH
+unsigned char swaptab[256] = {
+ 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+ 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+ 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+ 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+ 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+ 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+ 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+ 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+ 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+ 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+ 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+ 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+ 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+ 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+ 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+ 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+ 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+ 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+ 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+ 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+ 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+ 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+ 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+ 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+ 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+ 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+ 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+ 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+ 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+ 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+ 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+ 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+
+#define BS(b) (swaptab[b])
+
+#else
+
+#define BS(b) (b)
+
+#endif
+
+#define BYTEME(x) ((x) & 0xFF)
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",CFG_FLASH_BASE0_PRELIM);
+
+ size_b0 = flash_get_size((vu_char *)CFG_FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0: "
+ "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+ flash_info[0].flash_id,
+ size_b0, size_b0<<20);
+ }
+
+ DEBUGF("## Get flash bank 2 size @ 0x%08x\n",CFG_FLASH_BASE1_PRELIM);
+ size_b1 = flash_get_size((vu_char *)CFG_FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN);
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ flash_info[1].size = size_b1;
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[1]);
+#endif
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ flash_info[1].size = 0;
+ }
+
+ DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ base += 0x00020000; /* 128k per bank */
+ }
+ return;
+
+ default:
+ printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
+ return;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_MT: printf ("MT "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F320J3A: printf ("28F320J3A (32Mbit = 128K x 32)\n");
+ break;
+ case FLASH_28F640J3A: printf ("28F640J3A (64Mbit = 128K x 64)\n");
+ break;
+ case FLASH_28F128J3A: printf ("28F128J3A (128Mbit = 128K x 128)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ if (info->size >= (1 << 20)) {
+ i = 20;
+ } else {
+ i = 10;
+ }
+ printf (" Size: %ld %cB in %d Sectors\n",
+ info->size >> i,
+ (i == 20) ? 'M' : 'k',
+ info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info)
+{
+ vu_char manuf, device;
+
+ addr[0] = BS(0x90);
+ manuf = BS(addr[0]);
+ DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (vu_char *)addr, manuf);
+
+ switch (manuf) {
+ case BYTEME(AMD_MANUFACT):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case BYTEME(FUJ_MANUFACT):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case BYTEME(SST_MANUFACT):
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case BYTEME(STM_MANUFACT):
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case BYTEME(INTEL_MANUFACT):
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = BS(0xFF); /* restore read mode, (yes, BS is a NOP) */
+ return 0; /* no or unknown flash */
+ }
+
+ device = BS(addr[2]); /* device ID */
+
+ DEBUGF("Device ID @ 0x%08x: 0x%08x\n", (&addr[1]), device);
+
+ switch (device) {
+ case BYTEME(INTEL_ID_28F320J3A):
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case BYTEME(INTEL_ID_28F640J3A):
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case BYTEME(INTEL_ID_28F128J3A):
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ addr[0] = BS(0xFF); /* restore read mode (yes, a NOP) */
+ return 0; /* => no or unknown flash */
+
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = BS(0xFF); /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+ printf ("Can erase only Intel flash types - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_char *addr = (vu_char *)(info->start[sect]);
+ unsigned long status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = BS(0x50); /* clear status register */
+ *addr = BS(0x20); /* erase setup */
+ *addr = BS(0xD0); /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = BS(0xB0); /* suspend erase */
+ *addr = BS(0xFF); /* reset to read mode */
+ return 1;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ *addr = BS(0xFF); /* reset to read mode */
+ }
+ }
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define FLASH_WIDTH 1 /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ uchar *wp = (uchar *)addr;
+ int rc;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ while (cnt > 0) {
+ if ((rc = write_data(info, wp, *src)) != 0) {
+ return rc;
+ }
+ wp++;
+ src++;
+ cnt--;
+ }
+
+ return cnt;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, uchar *dest, uchar data)
+{
+ vu_char *addr = (vu_char *)dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((BS(*addr) & data) != data) {
+ return 2;
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = BS(0x40); /* write setup */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ start = get_timer (0);
+
+ while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = BS(0xFF); /* restore read mode */
+ return 1;
+ }
+ }
+
+ *addr = BS(0xFF); /* restore read mode */
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/nx823/flash.c b/board/nx823/flash.c
new file mode 100644
index 0000000000..616a13f2c6
--- /dev/null
+++ b/board/nx823/flash.c
@@ -0,0 +1,465 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern u_long *my_sernum; /* from nx823.c */
+
+/*-----------------------------------------------------------------------
+ * Protection Flags:
+ */
+#define FLAG_PROTECT_SET 0x01
+#define FLAG_PROTECT_CLEAR 0x02
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+ size_b0 = flash_get_size((FPW *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000);
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F320J3A:
+ printf ("28F320J3A\n"); break;
+ case FLASH_28F640J3A:
+ printf ("28F640J3A\n"); break;
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n"); break;
+ default: printf ("Unknown Chip Type\n"); break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+ FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW)0x00AA00AA;
+ addr[0x2AAA] = (FPW)0x00550055;
+ addr[0x5555] = (FPW)0x00900090;
+
+ value = addr[0];
+
+ switch (value) {
+ case (FPW)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW)0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case (FPW)INTEL_ID_28F320J3A:
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (FPW)INTEL_ID_28F640J3A:
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (FPW)INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW)0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *)(info->start[sect]);
+ FPW status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = (FPW)0x00500050; /* clear status register */
+ *addr = (FPW)0x00200020; /* erase setup */
+ *addr = (FPW)0x00D000D0; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW)0x00B000B0; /* suspend erase */
+ *addr = (FPW)0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ *addr = (FPW)0x00FF00FF; /* reset to read mode */
+ printf (" done\n");
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /* save sernum if needed */
+ if (addr >= CFG_FLASH_SN_SECTOR && addr < CFG_FLASH_SN_BASE)
+ {
+ u_long dest = CFG_FLASH_SN_BASE;
+ u_short *sn = (u_short *)my_sernum;
+
+ printf("(saving sernum)");
+ for (i=0; i<4; i++)
+ {
+ if ((rc = write_data(info, dest, sn[i])) != 0) {
+ return (rc);
+ }
+ dest += port_width;
+ }
+ }
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<port_width && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_data(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i=0; i<port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800)
+ {
+ putc('.');
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_data(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *)dest;
+ ulong status;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = (FPW)0x00400040; /* write setup */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW)0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW)0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
diff --git a/board/pcippc2/flash.c b/board/pcippc2/flash.c
new file mode 100644
index 0000000000..20f4d0343b
--- /dev/null
+++ b/board/pcippc2/flash.c
@@ -0,0 +1,573 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <flash.h>
+#include <asm/io.h>
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static ulong flash_get_size (ulong addr, flash_info_t *info);
+static int flash_get_offsets (ulong base, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_reset (ulong addr);
+
+unsigned long flash_init (void)
+{
+ unsigned int i;
+ unsigned long flash_size = 0;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = 0;
+ flash_info[i].size = 0;
+ }
+
+ DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE);
+
+ flash_size = flash_get_size (CFG_FLASH_BASE, flash_info);
+
+ DEBUGF("## Flash bank size: %08lx\n", flash_size);
+
+ if (flash_size) {
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
+ CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ } else {
+ puts ("Warning: the BOOT Flash is not initialised !");
+ }
+
+ return flash_size;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (ulong addr, flash_info_t *info)
+{
+ short i;
+ uchar value;
+
+ /* Write auto select command: read Manufacturer ID */
+ out8(addr + 0x0555, 0xAA);
+ iobarrier_rw();
+ out8(addr + 0x02AA, 0x55);
+ iobarrier_rw();
+ out8(addr + 0x0555, 0x90);
+ iobarrier_rw();
+
+ value = in8(addr);
+ iobarrier_rw();
+
+ DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value);
+
+ switch (value | (value << 16)) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+
+ case STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ flash_reset (addr);
+ return 0;
+ }
+
+ value = in8(addr + 1); /* device ID */
+ iobarrier_rw();
+
+ DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value);
+
+ switch (value) {
+ case AMD_ID_F040B:
+ DEBUGF("Am29F040B\n");
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ case AMD_ID_LV040B:
+ DEBUGF("Am29LV040B\n");
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ case AMD_ID_LV400T:
+ DEBUGF("Am29LV400T\n");
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ DEBUGF("Am29LV400B\n");
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ DEBUGF("Am29LV800T\n");
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ DEBUGF("Am29LV400B\n");
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ DEBUGF("Am29LV160T\n");
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV160B:
+ DEBUGF("Am29LV160B\n");
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case AMD_ID_LV320T:
+ DEBUGF("Am29LV320T\n");
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+#if 0
+ /* Has the same ID as AMD_ID_LV320T, to be fixed */
+ case AMD_ID_LV320B:
+ DEBUGF("Am29LV320B\n");
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+
+ case AMD_ID_LV033C:
+ DEBUGF("Am29LV033C\n");
+ info->flash_id += FLASH_AM033C;
+ info->sector_count = 64;
+ info->size = 0x01000000;
+ break; /* => 16Mb */
+
+ case STM_ID_F040B:
+ DEBUGF("M29F040B\n");
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ flash_reset (addr);
+ return (0); /* => no or unknown flash */
+
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ if (! flash_get_offsets (addr, info)) {
+ flash_reset (addr);
+ return 0;
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ value = in8(info->start[i] + 2);
+ iobarrier_rw();
+ info->protect[i] = (value & 1) != 0;
+ }
+
+ /*
+ * Reset bank to read mode
+ */
+ flash_reset (addr);
+
+ return (info->size);
+}
+
+static int flash_get_offsets (ulong base, flash_info_t *info)
+{
+ unsigned int i;
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ /* set sector offsets for uniform sector type */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + i * info->size /
+ info->sector_count;
+ }
+ break;
+ default:
+ return 0;
+ }
+
+ return 1;
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile ulong addr = info->start[0];
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if (s_first < 0 || s_first > s_last) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ out8(addr + 0x555, 0xAA);
+ iobarrier_rw();
+ out8(addr + 0x2AA, 0x55);
+ iobarrier_rw();
+ out8(addr + 0x555, 0x80);
+ iobarrier_rw();
+ out8(addr + 0x555, 0xAA);
+ iobarrier_rw();
+ out8(addr + 0x2AA, 0x55);
+ iobarrier_rw();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = info->start[sect];
+ out8(addr, 0x30);
+ iobarrier_rw();
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = info->start[l_sect];
+
+ DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT);
+
+ while ((in8(addr) & 0x80) != 0x80) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ flash_reset (info->start[0]);
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ iobarrier_rw();
+ }
+
+DONE:
+ /* reset to read mode */
+ flash_reset (info->start[0]);
+
+ printf (" done\n");
+ return 0;
+}
+
+/*
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile ulong addr = info->start[0];
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((in32(dest) & data) != data) {
+ return (2);
+ }
+
+ /* write each byte out */
+ for (i = 0; i < 4; i++) {
+ char *data_ch = (char *)&data;
+ int flag = disable_interrupts();
+
+ out8(addr + 0x555, 0xAA);
+ iobarrier_rw();
+ out8(addr + 0x2AA, 0x55);
+ iobarrier_rw();
+ out8(addr + 0x555, 0xA0);
+ iobarrier_rw();
+ out8(dest+i, data_ch[i]);
+ iobarrier_rw();
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flash_reset (addr);
+ return (1);
+ }
+ iobarrier_rw();
+ }
+ }
+
+ flash_reset (addr);
+ return (0);
+}
+
+/*
+ * Reset bank to read mode
+ */
+static void flash_reset (ulong addr)
+{
+ out8(addr, 0xF0); /* reset bank */
+ iobarrier_rw();
+}
+
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
+ case FLASH_MAN_STM: printf ("SGS THOMSON "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ if (info->size % 0x100000 == 0) {
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size / 0x100000, info->sector_count);
+ } else if (info->size % 0x400 == 0) {
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size / 0x400, info->sector_count);
+ } else {
+ printf (" Size: %ld B in %d Sectors\n",
+ info->size, info->sector_count);
+ }
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
diff --git a/board/pcippc2/pcippc2.h b/board/pcippc2/pcippc2.h
new file mode 100644
index 0000000000..6e9e2ff05e
--- /dev/null
+++ b/board/pcippc2/pcippc2.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PCIPPC2_H_
+#define _PCIPPC2_H_
+
+#include <config.h>
+#include <common.h>
+
+#include "hardware.h"
+
+#define FPGA(r, p) (pcippc2_fpga0_phys + HW_FPGA0_##r##_##p)
+#define UART(r) (pcippc2_fpga0_phys + HW_FPGA0_UART1 + NS16550_##r * 4)
+#define RTC(r) (pcippc2_fpga1_phys + HW_FPGA1_RTC + r)
+
+extern u32 pcippc2_fpga0_phys;
+extern u32 pcippc2_fpga1_phys;
+
+extern u32 pcippc2_sdram_size (void);
+
+extern void pcippc2_fpga_init (void);
+
+extern void cpc710_pci_init (void);
+extern void cpc710_pci_enable_timeout (void);
+
+extern unsigned long
+ cpc710_ram_init (void);
+
+#endif
diff --git a/board/pcippc2/pcippc2_fpga.c b/board/pcippc2/pcippc2_fpga.c
new file mode 100644
index 0000000000..7f6739ddab
--- /dev/null
+++ b/board/pcippc2/pcippc2_fpga.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+
+#include "pci.h"
+
+#include "hardware.h"
+#include "pcippc2.h"
+
+u32 pcippc2_fpga0_phys;
+u32 pcippc2_fpga1_phys;
+
+void pcippc2_fpga_init (void)
+{
+ pci_dev_t bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0);
+ unsigned int addr;
+ u16 cmd;
+
+ if (bdf == -1)
+ {
+ puts("Unable to find FPGA !\n");
+ hang();
+ }
+
+ pci_read_config_word(bdf, PCI_COMMAND, &cmd);
+ if ((cmd & (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)) != (PCI_COMMAND_MEMORY | PCI_COMMAND_IO))
+ {
+ puts("FPGA is not configured !\n");
+ hang();
+ }
+
+ pci_read_config_dword(bdf, PCI_BASE_ADDRESS_0, &addr);
+ if (addr & 0x1)
+ {
+ /* IO space
+ */
+ pcippc2_fpga0_phys = pci_io_to_phys(bdf, addr & 0xfffffffc);
+ }
+ else
+ {
+ /* Memory space
+ */
+ pcippc2_fpga0_phys = pci_mem_to_phys(bdf, addr & 0xfffffff0);
+ }
+
+ pci_read_config_dword(bdf, PCI_BASE_ADDRESS_1, &addr);
+ if (addr & 0x1)
+ {
+ /* IO space
+ */
+ pcippc2_fpga1_phys = pci_io_to_phys(bdf, addr & 0xfffffffc);
+ }
+ else
+ {
+ /* Memory space
+ */
+ pcippc2_fpga1_phys = pci_mem_to_phys(bdf, addr & 0xfffffff0);
+ }
+
+ /* Interrupts are not used
+ */
+ out32(FPGA(INT, INTR_MASK), 0xffffffff);
+ iobarrier_rw();
+}
diff --git a/board/rpxsuper/flash.c b/board/rpxsuper/flash.c
new file mode 100644
index 0000000000..0c298ba858
--- /dev/null
+++ b/board/rpxsuper/flash.c
@@ -0,0 +1,434 @@
+/*
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Flash Routines for AMD 29F080B devices
+ * Added support for 64bit and AMD 29DL323B
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <asm/io.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define RD_SWP32(x) in_le32((volatile u32*)x)
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* for now, only support the 4 MB Flash SIMM */
+ size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (AMD_MANUFACT & FLASH_VENDMASK):
+ printf ("AMD ");
+ break;
+ case (FUJ_MANUFACT & FLASH_VENDMASK):
+ printf ("FUJITSU ");
+ break;
+ case (SST_MANUFACT & FLASH_VENDMASK):
+ printf ("SST ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (AMD_ID_DL323B & FLASH_TYPEMASK):
+ printf("AM29DL323B (32 MBit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0) printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ vu_long vendor[2], devid[2];
+ ulong base = (ulong)addr;
+
+ /* Reset and Write auto select command: read Manufacturer ID */
+ addr[0] = 0xf0f0f0f0;
+ addr[2 * 0x0555] = 0xAAAAAAAA;
+ addr[2 * 0x02AA] = 0x55555555;
+ addr[2 * 0x0555] = 0x90909090;
+ addr[1] = 0xf0f0f0f0;
+ addr[2 * 0x0555 + 1] = 0xAAAAAAAA;
+ addr[2 * 0x02AA + 1] = 0x55555555;
+ addr[2 * 0x0555 + 1] = 0x90909090;
+ udelay (1000);
+
+ vendor[0] = RD_SWP32(&addr[0]);
+ vendor[1] = RD_SWP32(&addr[1]);
+ if (vendor[0] != vendor[1] || vendor[0] != AMD_MANUFACT) {
+ info->size = 0;
+ goto out;
+ }
+
+ devid[0] = RD_SWP32(&addr[2]);
+ devid[1] = RD_SWP32(&addr[3]);
+
+ if (devid[0] == AMD_ID_DL323B) {
+ /*
+ * we have 2 Banks
+ * Bank 1 (23 Sectors): 0-7=8kbyte, 8-22=64kbyte
+ * Bank 2 (48 Sectors): 23-70=64kbyte
+ */
+ info->flash_id = (AMD_MANUFACT & FLASH_VENDMASK) |
+ (AMD_ID_DL323B & FLASH_TYPEMASK);
+ info->sector_count = 71;
+ info->size = 4 * (8 * 8 + 63 * 64) * 1024;
+ }
+ else {
+ info->size = 0;
+ goto out;
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < 8; i++) {
+ info->start[i] = base + (i * 0x8000);
+ }
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x40000) + 8 * 0x8000 - 8 * 0x40000;
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address */
+ addr = (volatile unsigned long *)(info->start[i]);
+ addr[2 * 0x0555] = 0xAAAAAAAA;
+ addr[2 * 0x02AA] = 0x55555555;
+ addr[2 * 0x0555] = 0x90909090;
+ addr[2 * 0x0555 + 1] = 0xAAAAAAAA;
+ addr[2 * 0x02AA + 1] = 0x55555555;
+ addr[2 * 0x0555 + 1] = 0x90909090;
+ udelay (1000);
+ base = RD_SWP32(&addr[4]);
+ base |= RD_SWP32(&addr[5]);
+ info->protect[i] = base & 0x00010001 ? 1 : 0;
+ }
+ addr = (vu_long*)info->start[0];
+
+out:
+ /* reset command */
+ addr[0] = 0xf0f0f0f0;
+ addr[1] = 0xf0f0f0f0;
+
+ return info->size;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[2 * 0x0555] = 0xAAAAAAAA;
+ addr[2 * 0x02AA] = 0x55555555;
+ addr[2 * 0x0555] = 0x80808080;
+ addr[2 * 0x0555] = 0xAAAAAAAA;
+ addr[2 * 0x02AA] = 0x55555555;
+ addr[2 * 0x0555 + 1] = 0xAAAAAAAA;
+ addr[2 * 0x02AA + 1] = 0x55555555;
+ addr[2 * 0x0555 + 1] = 0x80808080;
+ addr[2 * 0x0555 + 1] = 0xAAAAAAAA;
+ addr[2 * 0x02AA + 1] = 0x55555555;
+ udelay (100);
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x30303030;
+ addr[1] = 0x30303030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+ while ( (addr[0] & 0x80808080) != 0x80808080 ||
+ (addr[1] & 0x80808080) != 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+ addr[1] = 0xF0F0F0F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ if ((dest & 0x00000004) == 0) {
+ addr[2 * 0x0555] = 0xAAAAAAAA;
+ addr[2 * 0x02AA] = 0x55555555;
+ addr[2 * 0x0555] = 0xA0A0A0A0;
+ }
+ else {
+ addr[2 * 0x0555 + 1] = 0xAAAAAAAA;
+ addr[2 * 0x02AA + 1] = 0x55555555;
+ addr[2 * 0x0555 + 1] = 0xA0A0A0A0;
+ }
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/rpxsuper/mii_phy.c b/board/rpxsuper/mii_phy.c
new file mode 100644
index 0000000000..319f9595a3
--- /dev/null
+++ b/board/rpxsuper/mii_phy.c
@@ -0,0 +1,108 @@
+#include <common.h>
+#include <mii_phy.h>
+#include "rpxsuper.h"
+
+#define MII_MDIO 0x01
+#define MII_MDCK 0x02
+#define MII_MDIR 0x04
+
+void
+mii_discover_phy(void)
+{
+ int known;
+ unsigned short phy_reg;
+ unsigned long phy_id;
+
+ known = 0;
+ printf("Discovering phy @ 0: ");
+ phy_id = mii_phy_read(2) << 16;
+ phy_id |= mii_phy_read(3);
+ if ((phy_id & 0xFFFFFC00) == 0x00137800) {
+ printf("Level One ");
+ if ((phy_id & 0x000003F0) == 0xE0) {
+ printf("LXT971A Revision %d\n", (int)(phy_id & 0xF));
+ known = 1;
+ }
+ else printf("unknown type\n");
+ }
+ else printf("unknown OUI = 0x%08lX\n", phy_id);
+
+ phy_reg = mii_phy_read(1);
+ if (!(phy_reg & 0x0004)) printf("Link is down\n");
+ if (!(phy_reg & 0x0020)) printf("Auto-negotiation not complete\n");
+ if (phy_reg & 0x0002) printf("Jabber condition detected\n");
+ if (phy_reg & 0x0010) printf("Remote fault condition detected \n");
+
+ if (known) {
+ phy_reg = mii_phy_read(17);
+ if (phy_reg & 0x0400)
+ printf("Phy operating at %d MBit/s in %s-duplex mode\n",
+ phy_reg & 0x4000 ? 100 : 10,
+ phy_reg & 0x0200 ? "full" : "half");
+ else
+ printf("bad link!!\n");
+/*
+left off: no link, green 100MBit, yellow 10MBit
+right off: no activity, green full-duplex, yellow half-duplex
+*/
+ mii_phy_write(20, 0x0452);
+ }
+}
+
+unsigned short
+mii_phy_read(unsigned short reg)
+{
+ int i;
+ unsigned short tmp, val = 0, adr = 0;
+ t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+
+ tmp = 0x6002 | (adr << 7) | (reg << 2);
+ regs->bcsr4 = 0xC3;
+ for (i = 0; i < 64; i++) {
+ regs->bcsr4 ^= MII_MDCK;
+ }
+ for (i = 0; i < 16; i++) {
+ regs->bcsr4 &= ~MII_MDCK;
+ if (tmp & 0x8000) regs->bcsr4 |= MII_MDIO;
+ else regs->bcsr4 &= ~MII_MDIO;
+ regs->bcsr4 |= MII_MDCK;
+ tmp <<= 1;
+ }
+ regs->bcsr4 |= MII_MDIR;
+ for (i = 0; i < 16; i++) {
+ val <<= 1;
+ regs->bcsr4 = MII_MDIO | (regs->bcsr4 | MII_MDCK);
+ if (regs->bcsr4 & MII_MDIO) val |= 1;
+ regs->bcsr4 = MII_MDIO | (regs->bcsr4 &= ~MII_MDCK);
+ }
+ return val;
+}
+
+void
+mii_phy_write(unsigned short reg, unsigned short val)
+{
+ int i;
+ unsigned short tmp, adr = 0;
+ t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+
+ tmp = 0x5002 | (adr << 7) | (reg << 2);
+ regs->bcsr4 = 0xC3;
+ for (i = 0; i < 64; i++) {
+ regs->bcsr4 ^= MII_MDCK;
+ }
+ for (i = 0; i < 16; i++) {
+ regs->bcsr4 &= ~MII_MDCK;
+ if (tmp & 0x8000) regs->bcsr4 |= MII_MDIO;
+ else regs->bcsr4 &= ~MII_MDIO;
+ regs->bcsr4 |= MII_MDCK;
+ tmp <<= 1;
+ }
+ for (i = 0; i < 16; i++) {
+ regs->bcsr4 &= ~MII_MDCK;
+ if (val & 0x8000) regs->bcsr4 |= MII_MDIO;
+ else regs->bcsr4 &= ~MII_MDIO;
+ regs->bcsr4 |= MII_MDCK;
+ val <<= 1;
+ }
+}
+
diff --git a/board/rsdproto/flash.c b/board/rsdproto/flash.c
new file mode 100644
index 0000000000..654012f607
--- /dev/null
+++ b/board/rsdproto/flash.c
@@ -0,0 +1,402 @@
+/*
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Flash Routines for AM290[48]0B devices
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* flash hardware ids */
+#define VENDOR_AMD 0x0001
+#define AMD_29DL323C_B 0x2253
+
+/* Define this to include autoselect sequence in flash_init(). Does NOT
+ * work when executing from flash itself, so this should be turned
+ * on only when debugging the RAM version.
+ */
+#undef WITH_AUTOSELECT
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if 1
+#define D(x)
+#else
+#define D(x) printf x
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+static unsigned char write_ull(flash_info_t *info,
+ unsigned long address,
+ volatile unsigned long long data);
+
+/* from flash_asm.S */
+extern void ull_write(unsigned long long volatile *address,
+ unsigned long long volatile *data);
+extern void ull_read(unsigned long long volatile *address,
+ unsigned long long volatile *data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong addr;
+
+#ifdef WITH_AUTOSELECT
+ {
+ unsigned long long *f_addr = (unsigned long long *)PHYS_FLASH;
+ unsigned long long f_command, vendor, device;
+ /* Perform Autoselect */
+ f_command = 0x00AA00AA00AA00AAULL;
+ ull_write(&f_addr[0x555], &f_command);
+ f_command = 0x0055005500550055ULL;
+ ull_write(&f_addr[0x2AA], &f_command);
+ f_command = 0x0090009000900090ULL;
+ ull_write(&f_addr[0x555], &f_command);
+ ull_read(&f_addr[0], &vendor);
+ vendor &= 0xffff;
+ ull_read(&f_addr[1], &device);
+ device &= 0xffff;
+ f_command = 0x00F000F000F000F0ULL;
+ ull_write(&f_addr[0x555], &f_command);
+ if (vendor != VENDOR_AMD || device != AMD_29DL323C_B)
+ return 0;
+ }
+#endif
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* 1st bank: 8 x 32 KB sectors */
+ flash_info[0].flash_id = VENDOR_AMD << 16 | AMD_29DL323C_B;
+ flash_info[0].sector_count = 8;
+ flash_info[0].size = flash_info[0].sector_count * 32 * 1024;
+ addr = PHYS_FLASH;
+ for(i = 0; i < flash_info[0].sector_count; i++) {
+ flash_info[0].start[i] = addr;
+ addr += flash_info[0].size / flash_info[0].sector_count;
+ }
+ /* 1st bank: 63 x 256 KB sectors */
+ flash_info[1].flash_id = VENDOR_AMD << 16 | AMD_29DL323C_B;
+ flash_info[1].sector_count = 63;
+ flash_info[1].size = flash_info[1].sector_count * 256 * 1024;
+ for(i = 0; i < flash_info[1].sector_count; i++) {
+ flash_info[1].start[i] = addr;
+ addr += flash_info[1].size / flash_info[1].sector_count;
+ }
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE >= PHYS_FLASH
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[1]);
+#endif
+
+ return flash_info[0].size + flash_info[1].size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id >> 16) {
+ case VENDOR_AMD:
+ printf ("AMD ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case AMD_29DL323C_B:
+ printf ("AM29DL323CB (32 Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect, l_sect;
+ ulong start;
+ unsigned long long volatile *f_addr;
+ unsigned long long volatile f_command;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ f_addr = (unsigned long long *)info->start[0];
+ f_command = 0x00AA00AA00AA00AAULL;
+ ull_write(&f_addr[0x555], &f_command);
+ f_command = 0x0055005500550055ULL;
+ ull_write(&f_addr[0x2AA], &f_command);
+ f_command = 0x0080008000800080ULL;
+ ull_write(&f_addr[0x555], &f_command);
+ f_command = 0x00AA00AA00AA00AAULL;
+ ull_write(&f_addr[0x555], &f_command);
+ f_command = 0x0055005500550055ULL;
+ ull_write(&f_addr[0x2AA], &f_command);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (l_sect = -1, sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+
+ f_addr =
+ (unsigned long long *)(info->start[sect]);
+ f_command = 0x0030003000300030ULL;
+ ull_write(f_addr, &f_command);
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+ do
+ {
+ if (get_timer(start) > CFG_FLASH_ERASE_TOUT)
+ { /* write reset command, command address is unimportant */
+ /* this command turns the flash back to read mode */
+ f_addr =
+ (unsigned long long *)(info->start[l_sect]);
+ f_command = 0x00F000F000F000F0ULL;
+ ull_write(f_addr, &f_command);
+ printf (" timeout\n");
+ return 1;
+ }
+ } while(*f_addr != 0xFFFFFFFFFFFFFFFFULL);
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ unsigned long cp, wp;
+ unsigned long long data;
+ int i, l, rc;
+
+ wp = (addr & ~7); /* get lower long long aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<8 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<8; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_ull(info, wp, data)) != 0) {
+ return rc;
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle long long aligned part
+ */
+ while (cnt >= 8) {
+ data = 0;
+ for (i=0; i<8; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_ull(info, wp, data)) != 0) {
+ return rc;
+ }
+ wp += 8;
+ cnt -= 8;
+ }
+
+ if (cnt == 0) {
+ return ERR_OK;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<8; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return write_ull(info, wp, data);
+}
+
+/*---------------------------------------------------------------------------
+*
+* FUNCTION NAME: write_ull
+*
+* DESCRIPTION: writes 8 bytes to flash
+*
+* EXTERNAL EFFECT: nothing
+*
+* PARAMETERS: 32 bit long pointer to address, 64 bit long pointer to data
+*
+* RETURNS: 0 if OK, 1 if timeout, 4 if parameter error
+*--------------------------------------------------------------------------*/
+
+static unsigned char write_ull(flash_info_t *info,
+ unsigned long address,
+ volatile unsigned long long data)
+{
+ static unsigned long long f_command;
+ static unsigned long long *f_addr;
+ ulong start;
+
+ /* address muss be 8-aligned! */
+ if (address & 0x7)
+ return ERR_ALIGN;
+
+ f_addr = (unsigned long long *)info->start[0];
+ f_command = 0x00AA00AA00AA00AAULL;
+ ull_write(&f_addr[0x555], &f_command);
+ f_command = 0x0055005500550055ULL;
+ ull_write(&f_addr[0x2AA], &f_command);
+ f_command = 0x00A000A000A000A0ULL;
+ ull_write(&f_addr[0x555], &f_command);
+
+ f_addr = (unsigned long long *)address;
+ f_command = data;
+ ull_write(f_addr, &f_command);
+
+ start = get_timer (0);
+ do
+ {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ {
+ /* write reset command, command address is unimportant */
+ /* this command turns the flash back to read mode */
+ f_addr = (unsigned long long *)info->start[0];
+ f_command = 0x00F000F000F000F0ULL;
+ ull_write(f_addr, &f_command);
+ return ERR_TIMOUT;
+ }
+ } while(*((unsigned long long *)address) != data);
+
+ return 0;
+}
diff --git a/board/siemens/CCM/flash.c b/board/siemens/CCM/flash.c
new file mode 100644
index 0000000000..e56114f80c
--- /dev/null
+++ b/board/siemens/CCM/flash.c
@@ -0,0 +1,553 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+ memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+#endif
+ } else {
+ memctl->memc_br1 = 0; /* invalidate bank */
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+
+ value = addr[0];
+
+ switch (value) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM16