Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

With this, fixup a trivial build error of get_effective_memsize needing
to be updated in the new board/freescale/p1010rdb/spl.c

Signed-off-by: Tom Rini <trini@ti.com>

29 files changed, 622 insertions, 178 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 35867dffdd..adf09efa27 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -151,7 +151,8 @@ void get_sys_info(sys_info_t *sys_info)
 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
-#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080) || \
+	defined(CONFIG_PPC_T2081)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #else
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
index 068e1f26bf..0bfd447381 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
@@ -53,8 +53,10 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
 	SET_USB_LIODN(2, "fsl-usb2-dr", 554),
 
+#ifdef CONFIG_FSL_SATA_V2
 	SET_SATA_LIODN(1, 555),
 	SET_SATA_LIODN(2, 556),
+#endif
 
 	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
 	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
index f2fbdebec1..07e27deb1f 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -43,7 +43,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10,
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
-#if defined(CONFIG_PPC_T2080)
 	{0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
@@ -129,7 +128,7 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 		XFI_FM1_MAC1, XFI_FM1_MAC2,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
 
-#elif defined(CONFIG_PPC_T2081)
+#if defined(CONFIG_PPC_T2081)
 	{0xAA, {PCIE3, PCIE3, PCIE3, PCIE3,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
 	{0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile
index d6f05f3cfe..660d1bbc2a 100644
--- a/board/freescale/p1010rdb/Makefile
+++ b/board/freescale/p1010rdb/Makefile
@@ -18,6 +18,10 @@ obj-y	+= spl_minimal.o tlb.o law.o
 
 else
 
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+endif
+
 obj-y	+= p1010rdb.o
 obj-y	+= ddr.o
 obj-y	+= law.o
diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c
new file mode 100644
index 0000000000..11bd9cfccc
--- /dev/null
+++ b/board/freescale/p1010rdb/spl.c
@@ -0,0 +1,108 @@
+/* Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <nand.h>
+#include <i2c.h>
+#include <fsl_esdhc.h>
+#include <spi_flash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t get_effective_memsize(void)
+{
+	return CONFIG_SYS_L2_SIZE;
+}
+
+void board_init_f(ulong bootflag)
+{
+	u32 plat_ratio;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+	console_init_f();
+
+	/* Clock configuration to access CPLD using IFC(GPCM) */
+	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+
+#ifdef CONFIG_P1010RDB_PB
+	setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
+#endif
+
+	/* initialize selected port with appropriate baud rate */
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	plat_ratio >>= 1;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+#ifdef CONFIG_SPL_MMC_BOOT
+	puts("\nSD boot...\n");
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	puts("\nSPI Flash boot...\n");
+#endif
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	*/
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+	bd_t *bd;
+
+	memset(gd, 0, sizeof(gd_t));
+	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+	memset(bd, 0, sizeof(bd_t));
+	gd->bd = bd;
+	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+
+	probecpu();
+	get_clocks();
+	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+			CONFIG_SPL_RELOC_MALLOC_SIZE);
+
+#ifndef CONFIG_SPL_NAND_BOOT
+	env_init();
+#endif
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_initialize(bd);
+#endif
+
+	/* relocate environment function pointers etc. */
+#ifdef CONFIG_SPL_NAND_BOOT
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (uchar *)CONFIG_ENV_ADDR);
+			    gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
+	gd->env_valid = 1;
+#else
+	env_relocate();
+#endif
+
+	i2c_init_all();
+
+	gd->ram_size = initdram(0);
+#ifdef CONFIG_SPL_NAND_BOOT
+	puts("\nTertiary program loader running in sram...");
+#else
+	puts("\nSecond program loader running in sram...");
+#endif
+
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_boot();
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+	nand_boot();
+#endif
+}
diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c
index 39a5a0f37b..607957003d 100644
--- a/board/freescale/p1010rdb/spl_minimal.c
+++ b/board/freescale/p1010rdb/spl_minimal.c
@@ -16,78 +16,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-
-void sdram_init(void)
-{
-	struct ccsr_ddr __iomem *ddr =
-		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	u32 ddr_ratio;
-	unsigned long ddr_freq_mhz;
-
-	ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
-	ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000;
-
-	/* mask off E bit */
-	u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
-
-	__raw_writel(CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
-	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-
-	if (ddr_freq_mhz < 700) {
-		__raw_writel(CONFIG_SYS_DDR_TIMING_3_667, &ddr->timing_cfg_3);
-		__raw_writel(CONFIG_SYS_DDR_TIMING_0_667, &ddr->timing_cfg_0);
-		__raw_writel(CONFIG_SYS_DDR_TIMING_1_667, &ddr->timing_cfg_1);
-		__raw_writel(CONFIG_SYS_DDR_TIMING_2_667, &ddr->timing_cfg_2);
-		__raw_writel(CONFIG_SYS_DDR_MODE_1_667, &ddr->sdram_mode);
-		__raw_writel(CONFIG_SYS_DDR_MODE_2_667, &ddr->sdram_mode_2);
-		__raw_writel(CONFIG_SYS_DDR_INTERVAL_667, &ddr->sdram_interval);
-		__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_667, &ddr->sdram_clk_cntl);
-		__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_667, &ddr->ddr_wrlvl_cntl);
-	} else {
-		__raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
-		__raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
-		__raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
-		__raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
-		__raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
-		__raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
-		__raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
-		__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
-		__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
-	}
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
-	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-
-	/* P1014 and it's derivatives support max 16bit DDR width */
-	if (svr == SVR_P1014) {
-		__raw_writel(ddr->sdram_cfg & ~SDRAM_CFG_DBW_MASK, &ddr->sdram_cfg);
-		__raw_writel(ddr->sdram_cfg | SDRAM_CFG_16_BE, &ddr->sdram_cfg);
-		/* For CS0_BNDS we divide the start and end address by 2, so we can just
-		 * shift the entire register to achieve the desired result and the mask
-		 * the value so we don't write reserved fields */
-		__raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff, &ddr->cs0_bnds);
-	}
-
-	asm volatile("sync;isync");
-	udelay(500);
-
-	/* Let the controller go */
-	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
-
-	set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
-}
-
 void board_init_f(ulong bootflag)
 {
 	u32 plat_ratio;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+#endif
+
 	/* initialize selected port with appropriate baud rate */
 	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
 	plat_ratio >>= 1;
@@ -98,9 +36,6 @@ void board_init_f(ulong bootflag)
 
 	puts("\nNAND boot... ");
 
-	/* Initialize the DDR3 */
-	sdram_init();
-
 	/* copy code to RAM and jump to it - this should not return */
 	/* NOTE - code has to be copied out of NAND buffer before
 	 * other blocks can be read.
@@ -111,6 +46,7 @@ void board_init_f(ulong bootflag)
 
 void board_init_r(gd_t *gd, ulong dest_addr)
 {
+	puts("\nSecond program loader running in sram...");
 	nand_boot();
 }
 
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index a3d36b35d5..af40f979d3 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -73,10 +73,18 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 7, BOOKE_PAGESZ_1M, 1),
 
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+#if defined(CONFIG_SYS_RAMBOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 8, BOOKE_PAGESZ_1G, 1)
+			0, 8, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	/* *I*G - L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		      0, 11, BOOKE_PAGESZ_256K, 1)
 #endif
 };
 
diff --git a/board/freescale/t2080qds/Makefile b/board/freescale/t208xqds/Makefile
index 0b8747b877..947b7f7324 100644
--- a/board/freescale/t2080qds/Makefile
+++ b/board/freescale/t208xqds/Makefile
@@ -4,8 +4,10 @@
 # SPDX-License-Identifier:      GPL-2.0+
 #
 
-obj-$(CONFIG_T2080QDS) += t2080qds.o
-obj-$(CONFIG_T2080QDS) += eth_t2080qds.o
+obj-$(CONFIG_T2080QDS) += t208xqds.o
+obj-$(CONFIG_T2080QDS) += eth_t208xqds.o
+obj-$(CONFIG_T2081QDS) += t208xqds.o
+obj-$(CONFIG_T2081QDS) += eth_t208xqds.o
 obj-$(CONFIG_PCI)      += pci.o
 obj-y   += ddr.o
 obj-y   += law.o
diff --git a/board/freescale/t2080qds/ddr.c b/board/freescale/t208xqds/ddr.c
index ed1334d985..ed1334d985 100644
--- a/board/freescale/t2080qds/ddr.c
+++ b/board/freescale/t208xqds/ddr.c
diff --git a/board/freescale/t2080qds/ddr.h b/board/freescale/t208xqds/ddr.h
index 9fc879a4ef..9fc879a4ef 100644
--- a/board/freescale/t2080qds/ddr.h
+++ b/board/freescale/t208xqds/ddr.h
diff --git a/board/freescale/t2080qds/eth_t2080qds.c b/board/freescale/t208xqds/eth_t208xqds.c
index 3e4ab8fa57..7d8411bef7 100644
--- a/board/freescale/t2080qds/eth_t2080qds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -25,21 +25,30 @@
 #include <asm/fsl_serdes.h>
 #include "../common/qixis.h"
 #include "../common/fman.h"
-#include "t2080qds_qixis.h"
+#include "t208xqds_qixis.h"
 
 #define EMI_NONE	0xFFFFFFFF
 #define EMI1_RGMII1	0
 #define EMI1_RGMII2     1
 #define EMI1_SLOT1	2
+#if defined(CONFIG_T2080QDS)
 #define EMI1_SLOT2	6
 #define EMI1_SLOT3	3
 #define EMI1_SLOT4	4
 #define EMI1_SLOT5	5
-#define EMI2		7
+#elif defined(CONFIG_T2081QDS)
+#define EMI1_SLOT2      3
+#define EMI1_SLOT3      4
+#define EMI1_SLOT5      5
+#define EMI1_SLOT6      6
+#define EMI1_SLOT7      7
+#endif
+#define EMI2		8
 
 static int mdio_mux[NUM_FM_PORTS];
 
 static const char * const mdio_names[] = {
+#if defined(CONFIG_T2080QDS)
 	"T2080QDS_MDIO_RGMII1",
 	"T2080QDS_MDIO_RGMII2",
 	"T2080QDS_MDIO_SLOT1",
@@ -48,12 +57,27 @@ static const char * const mdio_names[] = {
 	"T2080QDS_MDIO_SLOT5",
 	"T2080QDS_MDIO_SLOT2",
 	"T2080QDS_MDIO_10GC",
+#elif defined(CONFIG_T2081QDS)
+	"T2081QDS_MDIO_RGMII1",
+	"T2081QDS_MDIO_RGMII2",
+	"T2081QDS_MDIO_SLOT1",
+	"T2081QDS_MDIO_SLOT2",
+	"T2081QDS_MDIO_SLOT3",
+	"T2081QDS_MDIO_SLOT5",
+	"T2081QDS_MDIO_SLOT6",
+	"T2081QDS_MDIO_SLOT7",
+	"T2081QDS_MDIO_10GC",
+#endif
 };
 
 /* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
+#if defined(CONFIG_T2080QDS)
 static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
+#elif defined(CONFIG_T2081QDS)
+static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
+#endif
 
-static const char *T2080qds_mdio_name_for_muxval(u8 muxval)
+static const char *t208xqds_mdio_name_for_muxval(u8 muxval)
 {
 	return mdio_names[muxval];
 }
@@ -61,7 +85,7 @@ static const char *T2080qds_mdio_name_for_muxval(u8 muxval)
 struct mii_dev *mii_dev_for_muxval(u8 muxval)
 {
 	struct mii_dev *bus;
-	const char *name = T2080qds_mdio_name_for_muxval(muxval);
+	const char *name = t208xqds_mdio_name_for_muxval(muxval);
 
 	if (!name) {
 		printf("No bus for muxval %x\n", muxval);
@@ -78,15 +102,15 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval)
 	return bus;
 }
 
-struct T2080qds_mdio {
+struct t208xqds_mdio {
 	u8 muxval;
 	struct mii_dev *realbus;
 };
 
-static void T2080qds_mux_mdio(u8 muxval)
+static void t208xqds_mux_mdio(u8 muxval)
 {
 	u8 brdcfg4;
-	if (muxval < 7) {
+	if (muxval < 8) {
 		brdcfg4 = QIXIS_READ(brdcfg[4]);
 		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
 		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
@@ -94,54 +118,54 @@ static void T2080qds_mux_mdio(u8 muxval)
 	}
 }
 
-static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+static int t208xqds_mdio_read(struct mii_dev *bus, int addr, int devad,
 				int regnum)
 {
-	struct T2080qds_mdio *priv = bus->priv;
+	struct t208xqds_mdio *priv = bus->priv;
 
-	T2080qds_mux_mdio(priv->muxval);
+	t208xqds_mux_mdio(priv->muxval);
 
 	return priv->realbus->read(priv->realbus, addr, devad, regnum);
 }
 
-static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+static int t208xqds_mdio_write(struct mii_dev *bus, int addr, int devad,
 				int regnum, u16 value)
 {
-	struct T2080qds_mdio *priv = bus->priv;
+	struct t208xqds_mdio *priv = bus->priv;
 
-	T2080qds_mux_mdio(priv->muxval);
+	t208xqds_mux_mdio(priv->muxval);
 
 	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
 }
 
-static int T2080qds_mdio_reset(struct mii_dev *bus)
+static int t208xqds_mdio_reset(struct mii_dev *bus)
 {
-	struct T2080qds_mdio *priv = bus->priv;
+	struct t208xqds_mdio *priv = bus->priv;
 
 	return priv->realbus->reset(priv->realbus);
 }
 
-static int T2080qds_mdio_init(char *realbusname, u8 muxval)
+static int t208xqds_mdio_init(char *realbusname, u8 muxval)
 {
-	struct T2080qds_mdio *pmdio;
+	struct t208xqds_mdio *pmdio;
 	struct mii_dev *bus = mdio_alloc();
 
 	if (!bus) {
-		printf("Failed to allocate T2080QDS MDIO bus\n");
+		printf("Failed to allocate t208xqds MDIO bus\n");
 		return -1;
 	}
 
 	pmdio = malloc(sizeof(*pmdio));
 	if (!pmdio) {
-		printf("Failed to allocate T2080QDS private data\n");
+		printf("Failed to allocate t208xqds private data\n");
 		free(bus);
 		return -1;
 	}
 
-	bus->read = T2080qds_mdio_read;
-	bus->write = T2080qds_mdio_write;
-	bus->reset = T2080qds_mdio_reset;
-	sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval));
+	bus->read = t208xqds_mdio_read;
+	bus->write = t208xqds_mdio_write;
+	bus->reset = t208xqds_mdio_reset;
+	sprintf(bus->name, t208xqds_mdio_name_for_muxval(muxval));
 
 	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
 
@@ -154,7 +178,6 @@ static int T2080qds_mdio_init(char *realbusname, u8 muxval)
 
 	pmdio->muxval = muxval;
 	bus->priv = pmdio;
-
 	return mdio_register(bus);
 }
 
@@ -173,13 +196,20 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
 		phy = fm_info_get_phy_address(port);
 		switch (port) {
+#if defined(CONFIG_T2080QDS)
 		case FM1_DTSEC1:
 		case FM1_DTSEC2:
 		case FM1_DTSEC9:
 		case FM1_DTSEC10:
-			sprintf(alias, "phy_sgmii_s3_%x", phy);
-			fdt_set_phy_handle(fdt, compat, addr, alias);
-			fdt_status_okay_by_alias(fdt, "emi1_slot3");
+			if (mdio_mux[port] == EMI1_SLOT2) {
+				sprintf(alias, "phy_sgmii_s2_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+			} else if (mdio_mux[port] == EMI1_SLOT3) {
+				sprintf(alias, "phy_sgmii_s3_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot3");
+			}
 			break;
 		case FM1_DTSEC5:
 		case FM1_DTSEC6:
@@ -193,6 +223,36 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 				fdt_status_okay_by_alias(fdt, "emi1_slot2");
 			}
 			break;
+#elif defined(CONFIG_T2081QDS)
+		case FM1_DTSEC1:
+		case FM1_DTSEC2:
+		case FM1_DTSEC5:
+		case FM1_DTSEC6:
+		case FM1_DTSEC9:
+		case FM1_DTSEC10:
+			if (mdio_mux[port] == EMI1_SLOT2) {
+				sprintf(alias, "phy_sgmii_s2_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+			} else if (mdio_mux[port] == EMI1_SLOT3) {
+				sprintf(alias, "phy_sgmii_s3_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot3");
+			} else if (mdio_mux[port] == EMI1_SLOT5) {
+				sprintf(alias, "phy_sgmii_s5_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot5");
+			} else if (mdio_mux[port] == EMI1_SLOT6) {
+				sprintf(alias, "phy_sgmii_s6_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot6");
+			} else if (mdio_mux[port] == EMI1_SLOT7) {
+				sprintf(alias, "phy_sgmii_s7_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot7");
+			}
+			break;
+#endif
 		default:
 			break;
 		}
@@ -226,8 +286,8 @@ void fdt_fixup_board_enet(void *fdt)
 }
 
 /*
- * This function reads RCW to check if Serdes1{E,F,G,H} is configured
- * as slot 1/2/3 and update the lane_to_slot[] array accordingly
+ * This function reads RCW to check if Serdes1{A:H} is configured
+ * to slot 1/2/3/4/5/6/7 and update the lane_to_slot[] array accordingly
  */
 static void initialize_lane_to_slot(void)
 {
@@ -238,6 +298,7 @@ static void initialize_lane_to_slot(void)
 	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 
 	switch (srds_s1) {
+#if defined(CONFIG_T2080QDS)
 	case 0x51:
 	case 0x5f:
 	case 0x65:
@@ -264,6 +325,31 @@ static void initialize_lane_to_slot(void)
 		lane_to_slot[6] = 3;
 		lane_to_slot[7] = 3;
 		break;
+#elif defined(CONFIG_T2081QDS)
+	case 0x6b:
+		lane_to_slot[4] = 1;
+		lane_to_slot[5] = 3;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 3;
+		break;
+	case 0xca:
+	case 0xcb:
+		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 6;
+		lane_to_slot[3] = 5;
+		lane_to_slot[5] = 3;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 3;
+		break;
+	case 0xf2:
+		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 7;
+		lane_to_slot[3] = 7;
+		lane_to_slot[5] = 4;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 7;
+		break;
+#endif
 	default:
 		break;
 	}
@@ -305,14 +391,20 @@ int board_eth_init(bd_t *bis)
 	fm_memac_mdio_init(bis, &tgec_mdio_info);
 
 	/* Register the muxing front-ends to the MDIO buses */
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
-	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
-	T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+#if defined(CONFIG_T2080QDS)
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+#endif
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+#if defined(CONFIG_T2081QDS)
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
+#endif
+	t208xqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
 
 	/* Set the two on-board RGMII PHY address */
 	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
@@ -327,21 +419,21 @@ int board_eth_init(bd_t *bis)
 	case 0x95:
 	case 0xa2:
 	case 0x94:
-		/* SGMII in Slot3 */
+		/* T2080QDS: SGMII in Slot3;  T2081QDS: SGMII in Slot2 */
 		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
-		/* SGMII in Slot2 */
+		/* T2080QDS: SGMII in Slot2;  T2081QDS: SGMII in Slot1 */
 		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
 	case 0x51:
 	case 0x5f:
 	case 0x65:
-		/* XAUI/HiGig in Slot3 */
+		/* T2080QDS: XAUI/HiGig in Slot3;  T2081QDS: in Slot2 */
 		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
-		/* SGMII in Slot2 */
+		/* T2080QDS: SGMII in Slot2;  T2081QDS: in Slot3 */
 		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
@@ -365,7 +457,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_10GEC2, 5);
 		fm_info_set_phy_address(FM1_10GEC3, 6);
 		fm_info_set_phy_address(FM1_10GEC4, 7);
-		/* SGMII in Slot2 */
+		/* T2080QDS: SGMII in Slot2;  T2081QDS: in Slot3 */
 		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
 		break;
@@ -373,7 +465,7 @@ int board_eth_init(bd_t *bis)
 	case 0x6d:
 		fm_info_set_phy_address(FM1_10GEC1, 4);
 		fm_info_set_phy_address(FM1_10GEC2, 5);
-		/* SGMII in Slot3 */
+		/* T2080QDS: SGMII in Slot3;  T2081QDS: in Slot2 */
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
@@ -408,6 +500,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
+#if defined(CONFIG_T2080QDS)
 	case 0xd9:
 	case 0xd3:
 	case 0xcb:
@@ -419,6 +512,27 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
 		break;
+#elif defined(CONFIG_T2081QDS)
+	case 0xca:
+	case 0xcb:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		/* SGMII in Slot5 */
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+		/* SGMII in Slot6 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		/* SGMII in Slot7 */
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+		break;
+#endif
+	case 0xf2:
+		/* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot7 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
 	default:
 		break;
 	}
@@ -452,8 +566,25 @@ int board_eth_init(bd_t *bis)
 			case 3:
 				mdio_mux[i] = EMI1_SLOT3;
 				fm_info_set_mdio(i, mii_dev_for_muxval(
-						mdio_mux[i]));
+						 mdio_mux[i]));
+				break;
+#if defined(CONFIG_T2081QDS)
+			case 5:
+				mdio_mux[i] = EMI1_SLOT5;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 6:
+				mdio_mux[i] = EMI1_SLOT6;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 7:
+				mdio_mux[i] = EMI1_SLOT7;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
 				break;
+#endif
 			}
 			break;
 		case PHY_INTERFACE_MODE_RGMII:
diff --git a/board/freescale/t2080qds/law.c b/board/freescale/t208xqds/law.c
index 74e2a53a8f..74e2a53a8f 100644
--- a/board/freescale/t2080qds/law.c
+++ b/board/freescale/t208xqds/law.c
diff --git a/board/freescale/t2080qds/pci.c b/board/freescale/t208xqds/pci.c
index 84a89dad4f..84a89dad4f 100644
--- a/board/freescale/t2080qds/pci.c
+++ b/board/freescale/t208xqds/pci.c
diff --git a/board/freescale/t2080qds/t2080_rcw.cfg b/board/freescale/t208xqds/t2080_rcw.cfg
index c2ad0fda55..c2ad0fda55 100644
--- a/board/freescale/t2080qds/t2080_rcw.cfg
+++ b/board/freescale/t208xqds/t2080_rcw.cfg
diff --git a/board/freescale/t208xqds/t2081_rcw.cfg b/board/freescale/t208xqds/t2081_rcw.cfg
new file mode 100644
index 0000000000..a2d5ecf4ad
--- /dev/null
+++ b/board/freescale/t208xqds/t2081_rcw.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#Default SerDes Protocol: 0x6C
+#Core/DDR: 1533Mhz/2133MT/s
+12100017 15000000 00000000 00000000
+6c000002 00008000 e8104000 c1000000
+00000000 00000000 00000000 000307fc
+00000000 00000000 00000000 00000004
diff --git a/board/freescale/t2080qds/t2080_pbi.cfg b/board/freescale/t208xqds/t208x_pbi.cfg
index e200d926fb..e200d926fb 100644
--- a/board/freescale/t2080qds/t2080_pbi.cfg
+++ b/board/freescale/t208xqds/t208x_pbi.cfg
diff --git a/board/freescale/t2080qds/t2080qds.c b/board/freescale/t208xqds/t208xqds.c
index 4fe8ccb54c..9cfc0bd7c3 100644
--- a/board/freescale/t2080qds/t2080qds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -20,8 +20,8 @@
 
 #include "../common/qixis.h"
 #include "../common/vsc3316_3308.h"
-#include "t2080qds.h"
-#include "t2080qds_qixis.h"
+#include "t208xqds.h"
+#include "t208xqds_qixis.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -89,19 +89,22 @@ int select_i2c_ch_pca9547(u8 ch)
 int brd_mux_lane_to_slot(void)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 srds_prtcl_s1, srds_prtcl_s2;
+	u32 srds_prtcl_s1;
 
 	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
 				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
-	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+#if defined(CONFIG_T2080QDS)
+	u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
 				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+#endif
 
 	switch (srds_prtcl_s1) {
 	case 0:
 		/* SerDes1 is not enabled */
 		break;
+#if defined(CONFIG_T2080QDS)
 	case 0x1c:
 	case 0xa2:
 		/* SD1(A:D) => SLOT3 SGMII
@@ -180,12 +183,89 @@ int brd_mux_lane_to_slot(void)
 		 */
 		 QIXIS_WRITE(brdcfg[12], 0x1a);
 		 break;
+#elif defined(CONFIG_T2081QDS)
+	case 0x51:
+		/* SD1(A:D) => SLOT2 XAUI
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F:H) => SLOT3 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x98);
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0x6b:
+		/* SD1(A:D) => XFI SFP Module
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F:H) => SLOT3 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x80);
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0x6c:
+		/* SD1(A:B) => XFI SFP Module
+		 * SD1(C:D) => SLOT2 SGMII
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xe8);
+		QIXIS_WRITE(brdcfg[13], 0x0);
+		break;
+	case 0x6d:
+		/* SD1(A:B) => XFI SFP Module
+		 * SD1(C:D) => SLOT2 SGMII
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xe8);
+		QIXIS_WRITE(brdcfg[13], 0x0);
+		break;
+	case 0xaa:
+	case 0xab:
+		/* SD1(A:D) => SLOT2 PCIe3 x4
+		 * SD1(F:H) => SLOT1 SGMI4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xf8);
+		QIXIS_WRITE(brdcfg[13], 0x0);
+		break;
+	case 0xca:
+	case 0xcb:
+		/* SD1(A)   => SLOT2 PCIe3 x1
+		 * SD1(B)   => SLOT7 SGMII
+		 * SD1(C)   => SLOT6 SGMII
+		 * SD1(D)   => SLOT5 SGMII
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F:H) => SLOT3 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x80);
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0xde:
+	case 0xdf:
+		/* SD1(A:D) => SLOT2 PCIe3 x4
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F)   => SLOT4 PCIe1 x1
+		 * SD1(G)   => SLOT3 PCIe2 x1
+		 * SD1(H)   => SLOT7 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x98);
+		QIXIS_WRITE(brdcfg[13], 0x25);
+		break;
+	case 0xf2:
+		/* SD1(A)   => SLOT2 PCIe3 x1
+		 * SD1(B:D) => SLOT7 SGMII
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F)   => SLOT4 PCIe1 x1
+		 * SD1(G)   => SLOT3 PCIe2 x1
+		 * SD1(H)   => SLOT7 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x81);
+		QIXIS_WRITE(brdcfg[13], 0xa5);
+		break;
+#endif
 	default:
 		printf("WARNING: unsupported for SerDes1 Protocol %d\n",
 		       srds_prtcl_s1);
 		return -1;
 	}
 
+#ifdef CONFIG_T2080QDS
 	switch (srds_prtcl_s2) {
 	case 0:
 		/* SerDes2 is not enabled */
@@ -241,6 +321,7 @@ int brd_mux_lane_to_slot(void)
 		       srds_prtcl_s2);
 		return -1;
 	}
+#endif
 	return 0;
 }
 
diff --git a/board/freescale/t2080qds/t2080qds.h b/board/freescale/t208xqds/t208xqds.h
index 39fcef28c3..39fcef28c3 100644
--- a/board/freescale/t2080qds/t2080qds.h
+++ b/board/freescale/t208xqds/t208xqds.h
diff --git a/board/freescale/t2080qds/t2080qds_qixis.h b/board/freescale/t208xqds/t208xqds_qixis.h
index fc83da707f..bdcdc12f59 100644
--- a/board/freescale/t2080qds/t2080qds_qixis.h
+++ b/board/freescale/t208xqds/t208xqds_qixis.h
@@ -4,10 +4,10 @@
  * SPDX-License-Identifier:     GPL-2.0+
  */
 
-#ifndef __T2080QDS_QIXIS_H__
-#define __T2080QDS_QIXIS_H__
+#ifndef __T208xQDS_QIXIS_H__
+#define __T208xQDS_QIXIS_H__
 
-/* Definitions of QIXIS Registers for T2080QDS */
+/* Definitions of QIXIS Registers for T208xQDS */
 
 #define QIXIS_SRDS1CLK_122		0x5a
 #define QIXIS_SRDS1CLK_125		0x5e
@@ -35,6 +35,8 @@
 
 #define BRDCFG5_IRE                     0x20    /* i2c Remote i2c1 enable */
 
+#define BRDCFG9_SFP_TX_EN		0x10
+
 #define BRDCFG12_SD3EN_MASK             0x20
 #define BRDCFG12_SD3MX_MASK             0x08
 #define BRDCFG12_SD3MX_SLOT5            0x08
diff --git a/board/freescale/t2080qds/tlb.c b/board/freescale/t208xqds/tlb.c
index 62cd11033a..62cd11033a 100644
--- a/board/freescale/t2080qds/tlb.c
+++ b/board/freescale/t208xqds/tlb.c
diff --git a/boards.cfg b/boards.cfg
index 8ce130a563..a0dda1b241 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -967,11 +967,16 @@ Active  powerpc     mpc85xx        -           freescale       p2041rdb
 Active  powerpc     mpc85xx        -           freescale       t1040qds            T1040QDS                             T1040QDS:PPC_T1040                                                                                                                Poonam Aggrwal <poonam.aggrwal@freescale.com>
 Active  powerpc     mpc85xx        -           freescale       t104xrdb            T1040RDB                             T1040RDB:PPC_T1040                                                                                                                Poonam Aggrwal  <poonam.aggrwal@freescale.com>
 Active  powerpc     mpc85xx        -           freescale       t104xrdb            T1042RDB_PI                          T1042RDB_PI:PPC_T1042                                                                                                             Poonam Aggrwal  <poonam.aggrwal@freescale.com>
-Active  powerpc     mpc85xx        -           freescale       t2080qds            T2080QDS                             T2080QDS:PPC_T2080                                                                                                                -
-Active  powerpc     mpc85xx        -           freescale       t2080qds            T2080QDS_NAND                        T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000                                                                      -
-Active  powerpc     mpc85xx        -           freescale       t2080qds            T2080QDS_SDCARD                      T2080QDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000                                                                    -
-Active  powerpc     mpc85xx        -           freescale       t2080qds            T2080QDS_SPIFLASH                    T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000                                                                  -
-Active  powerpc     mpc85xx        -           freescale       t2080qds            T2080QDS_SRIO_PCIE_BOOT              T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000                                                                  -
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2080QDS              T208xQDS:PPC_T2080
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2080QDS_SDCARD       T208xQDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2080QDS_SPIFLASH     T208xQDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2080QDS_NAND         T208xQDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2080QDS_SRIO_PCIE_BOOT      T208xQDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2081QDS              T208xQDS:PPC_T2081
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2081QDS_SDCARD       T208xQDS:PPC_T2081,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2081QDS_SPIFLASH     T208xQDS:PPC_T2081,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2081QDS_NAND         T208xQDS:PPC_T2081,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000
+Active  powerpc     mpc85xx        -           freescale       t208xqds            T2081QDS_SRIO_PCIE_BOOT      T208xQDS:PPC_T2081,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4160QDS                             T4240QDS:PPC_T4160                                                                                                                -
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4160QDS_SDCARD                      T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000                                                                    -
 Active  powerpc     mpc85xx        -           freescale       t4qds               T4160QDS_SPIFLASH                    T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000                                                                  -
diff --git a/common/env_sf.c b/common/env_sf.c
index 9f806fb090..be270f21bc 100644
--- a/common/env_sf.c
+++ b/common/env_sf.c
@@ -299,13 +299,16 @@ int saveenv(void)
 
 void env_relocate_spec(void)
 {
-	char buf[CONFIG_ENV_SIZE];
 	int ret;
+	char *buf = NULL;
 
+	buf = (char *)malloc(CONFIG_ENV_SIZE);
 	env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
 			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
 	if (!env_flash) {
 		set_default_env("!spi_flash_probe() failed");
+		if (buf)
+			free(buf);
 		return;
 	}
 
@@ -321,6 +324,8 @@ void env_relocate_spec(void)
 		gd->env_valid = 1;
 out:
 	spi_flash_free(env_flash);
+	if (buf)
+		free(buf);
 	env_flash = NULL;
 }
 #endif
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
index 994500b688..5332e1a18f 100644
--- a/drivers/net/phy/atheros.c
+++ b/drivers/net/phy/atheros.c
@@ -13,6 +13,7 @@ static int ar8021_config(struct phy_device *phydev)
 	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
 	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
 
+	phydev->supported = phydev->drv->features;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 45e5d6a5bd..1ca7cf5d9b 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -86,7 +86,7 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 #endif
 	}
 
-	if (!strcmp(phy_type, "utmi")) {
+	if (!strncmp(phy_type, "utmi", 4)) {
 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
 		setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
 		setbits_be32(&ehci->control, UTMI_PHY_EN);
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 9846118fb8..faa5495cb4 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -42,7 +42,7 @@
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xeff80000
+#define CONFIG_SYS_TEXT_BASE	0xeff40000
 #endif
 
 #ifndef	CONFIG_RESET_VECTOR_ADDRESS
@@ -326,7 +326,7 @@
 
 /* NAND boot: 4K NAND loader config */
 #define CONFIG_SYS_NAND_SPL_SIZE	0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	((768 << 10) - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
 #define CONFIG_SYS_NAND_U_BOOT_START \
 		(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
@@ -626,7 +626,7 @@
 #if defined(CONFIG_RAMBOOT_NAND)
 #define CONFIG_ENV_IS_IN_NAND	1
 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -649,11 +649,7 @@
 #endif
 #else
 	#define CONFIG_ENV_IS_IN_FLASH	1
-	#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-	#define CONFIG_ENV_ADDR		0xfff80000
-	#else
 	#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-	#endif
 	#define CONFIG_ENV_SIZE		0x2000
 	#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
 #endif
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index f82fbca77c..eabfc85f0f 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -21,19 +21,75 @@
 #define CONFIG_NAND_FSL_IFC
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
+#define CONFIG_SPL
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_MMC_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_FSL_LAW                 /* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE		0x11001000
+#define CONFIG_SPL_TEXT_BASE		0xD0001000
+#define CONFIG_SPL_PAD_TO		0x18000
+#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SYS_MMC_U_BOOT_SIZE	(512 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
+#define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SPL_MMC_BOOT
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_COMMON_INIT_DDR
+#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
+#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#else
+#define CONFIG_SPL
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_FSL_LAW         /* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE			0x11001000
+#define CONFIG_SPL_TEXT_BASE			0xD0001000
+#define CONFIG_SPL_PAD_TO			0x18000
+#define CONFIG_SPL_MAX_SIZE			(96 * 1024)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(512 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SPL_SPI_BOOT
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_COMMON_INIT_DDR
+#endif
+#endif
 #endif
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
@@ -51,8 +107,48 @@
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#else
+#define CONFIG_TPL
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_SPL_NAND_BOOT
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NAND_INIT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_COMMON_INIT_DDR
+#define CONFIG_SPL_MAX_SIZE		(128 << 10)
+#define CONFIG_SPL_TEXT_BASE		0xD0001000
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(576 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
+#define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
+#elif defined(CONFIG_SPL_BUILD)
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TEXT_BASE		0xff800000
+#define CONFIG_SPL_MAX_SIZE		8192
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST	0xD0000000
+#define CONFIG_SYS_NAND_U_BOOT_START	0xD0000000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
+#endif
+#define CONFIG_SPL_PAD_TO	0x20000
+#define CONFIG_TPL_PAD_TO	0x20000
+#define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
+#define CONFIG_SYS_TEXT_BASE	0x11001000
+#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#endif
 #endif
-
 
 #ifdef CONFIG_NAND_SECBOOT	/* NAND Boot */
 #define CONFIG_RAMBOOT_NAND
@@ -473,6 +569,43 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon*/
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/
 
+/*
+ * Config the L2 Cache as L2 SRAM
+ */
+#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_INIT_L2_ADDR		0xD0000000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	0xD0001000
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE	(16 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(128 << 10)
+#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
+#elif defined(CONFIG_NAND)
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_SYS_INIT_L2_ADDR		0xD0000000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	0xD0001000
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
+#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
+#else
+#define CONFIG_SYS_INIT_L2_ADDR		0xD0000000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x3000)
+#define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
+#endif
+#endif
+#endif
+
 /* Serial Port */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
@@ -480,7 +613,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
@@ -637,12 +770,12 @@ extern unsigned long get_sdram_size(void);
 /*
  * Environment
  */
-#if defined(CONFIG_RAMBOOT_SDCARD)
+#if defined(CONFIG_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
-#elif defined(CONFIG_RAMBOOT_SPIFLASH)
+#elif defined(CONFIG_SPIFLASH)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
 #define CONFIG_ENV_SPI_CS	0
@@ -653,6 +786,10 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_ENV_SIZE		0x2000
 #elif defined(CONFIG_NAND)
 #define CONFIG_ENV_IS_IN_NAND
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
+#else
 #if defined(CONFIG_P1010RDB_PA)
 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
@@ -660,7 +797,8 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_ENV_SIZE		(16 * 1024)
 #define CONFIG_ENV_RANGE	(32 * CONFIG_ENV_SIZE) /* new block size 512K */
 #endif
-#define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#endif
+#define CONFIG_ENV_OFFSET	(1024 * 1024)
 #elif defined(CONFIG_SYS_RAMBOOT)
 #define CONFIG_ENV_IS_NOWHERE		/* Store ENV in memory only */
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE - 0x1000)
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 6255b0ae4e..139d4fed25 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -30,12 +30,12 @@
 #define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
-#define CONFIG_SPL_PAD_TO		0x18000
-#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SPL_PAD_TO		0x20000
+#define CONFIG_SPL_MAX_SIZE		(128 * 1024)
 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
 #define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS	(128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_MMC_BOOT
@@ -60,12 +60,12 @@
 #define CONFIG_FSL_LAW		/* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
-#define CONFIG_SPL_PAD_TO		0x18000
-#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SPL_PAD_TO		0x20000
+#define CONFIG_SPL_MAX_SIZE		(128 * 1024)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_SPI_BOOT
@@ -365,10 +365,10 @@
 #define CONFIG_SYS_L2_SIZE		(256 << 10)
 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 #define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(96 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(108 << 10)
 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 #elif defined(CONFIG_NAND)
 #ifdef CONFIG_TPL_BUILD
diff --git a/include/configs/T2080QDS.h b/include/configs/T208xQDS.h
index 9448ec8c45..5b22d64467 100644
--- a/include/configs/T2080QDS.h
+++ b/include/configs/T208xQDS.h
@@ -5,21 +5,25 @@
  */
 
 /*
- * T2080 QDS board configuration file
+ * T2080/T2081 QDS board configuration file
  */
 
-#ifndef __T2080QDS_H
-#define __T2080QDS_H
+#ifndef __T208xQDS_H
+#define __T208xQDS_H
 
-#define CONFIG_T2080QDS
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #define CONFIG_MMC
 #define CONFIG_SPI_FLASH
 #define CONFIG_USB_EHCI
+#if defined(CONFIG_PPC_T2080)
+#define CONFIG_T2080QDS
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_SRIO		/* Enable Serial RapidIO Support */
 #define CONFIG_SRIO1		/* SRIO port 1 */
 #define CONFIG_SRIO2		/* SRIO port 2 */
+#elif defined(CONFIG_PPC_T2081)
+#define CONFIG_T2081QDS
+#endif
 
 /* High Level Configuration Options */
 #define CONFIG_PHYS_64BIT
@@ -44,8 +48,12 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t208xqds/t208x_pbi.cfg
+#if defined(CONFIG_PPC_T2080)
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2080_rcw.cfg
+#elif defined(CONFIG_PPC_T2081)
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2081_rcw.cfg
+#endif
 #endif
 
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
@@ -447,7 +455,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESPI
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_SPI_FLASH_STMICRO
+#if defined(CONFIG_T2080QDS)
 #define CONFIG_SPI_FLASH_SPANSION
+#elif defined(CONFIG_T2081QDS)
+#define CONFIG_SPI_FLASH_EON
+#endif
+
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED	 10000000
 #define CONFIG_SF_DEFAULT_MODE	  0
@@ -505,7 +518,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
+#define CONFIG_FSL_PCIE_RESET	   /* need PCIe reset errata */
 #define CONFIG_NET_MULTI
 #define CONFIG_E1000
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
@@ -800,4 +813,4 @@ unsigned long get_board_ddr_clk(void);
 #undef CONFIG_CMD_USB
 #endif
 
-#endif	/* __T2080QDS_H */
+#endif	/* __T208xQDS_H */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 117484da87..07b61795bb 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -159,12 +159,12 @@
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
-#define CONFIG_SPL_PAD_TO		0x18000
-#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SPL_PAD_TO		0x20000
+#define CONFIG_SPL_MAX_SIZE		(128 * 1024)
 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
 #define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS	(128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_MMC_BOOT
@@ -189,12 +189,12 @@
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE		0x11001000
 #define CONFIG_SPL_TEXT_BASE		0xf8f81000
-#define CONFIG_SPL_PAD_TO		0x18000
-#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SPL_PAD_TO		0x20000
+#define CONFIG_SPL_MAX_SIZE		(128 * 1024)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_SPI_BOOT
@@ -579,11 +579,15 @@
 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(96 << 10)
 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
+#if defined(CONFIG_P2020RDB)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(364 << 10)
+#else
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(108 << 10)
+#endif
 #elif defined(CONFIG_NAND)
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000