Merge branch 'master' of http://git.denx.de/u-boot-samsung

36 files changed, 787 insertions, 87 deletions

diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index e9a102ce3c..f3eadb4db3 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -46,11 +46,16 @@ config TARGET_SMDK5420
 	select SUPPORT_SPL
 	select OF_CONTROL if !SPL_BUILD
 
-config TARGET_PEACH_PIT
+config TARGET_PEACH_PI
 	bool "Peach Pi board"
 	select SUPPORT_SPL
 	select OF_CONTROL if !SPL_BUILD
 
+config TARGET_PEACH_PIT
+	bool "Peach Pit board"
+	select SUPPORT_SPL
+	select OF_CONTROL if !SPL_BUILD
+
 endchoice
 
 config SYS_SOC
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index c0c95fbc83..8fab135beb 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -118,7 +118,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
 			div = PLL_DIV_1024;
 		else if (proid_is_exynos4412())
 			div = PLL_DIV_65535;
-		else if (proid_is_exynos5250() || proid_is_exynos5420())
+		else if (proid_is_exynos5250() || proid_is_exynos5420()
+			 || proid_is_exynos5800())
 			div = PLL_DIV_65536;
 		else
 			return 0;
@@ -1581,7 +1582,7 @@ static unsigned long exynos4_get_i2c_clk(void)
 unsigned long get_pll_clk(int pllreg)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_get_pll_clk(pllreg);
 		return exynos5_get_pll_clk(pllreg);
 	} else {
@@ -1617,7 +1618,7 @@ unsigned long get_i2c_clk(void)
 unsigned long get_pwm_clk(void)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_get_pwm_clk();
 		return clock_get_periph_rate(PERIPH_ID_PWM0);
 	} else {
@@ -1630,7 +1631,7 @@ unsigned long get_pwm_clk(void)
 unsigned long get_uart_clk(int dev_index)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_get_uart_clk(dev_index);
 		return exynos5_get_uart_clk(dev_index);
 	} else {
@@ -1643,7 +1644,7 @@ unsigned long get_uart_clk(int dev_index)
 unsigned long get_mmc_clk(int dev_index)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_get_mmc_clk(dev_index);
 		return exynos5_get_mmc_clk(dev_index);
 	} else {
@@ -1654,7 +1655,7 @@ unsigned long get_mmc_clk(int dev_index)
 void set_mmc_clk(int dev_index, unsigned int div)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			exynos5420_set_mmc_clk(dev_index, div);
 		else
 			exynos5_set_mmc_clk(dev_index, div);
@@ -1668,7 +1669,7 @@ unsigned long get_lcd_clk(void)
 	if (cpu_is_exynos4())
 		return exynos4_get_lcd_clk();
 	else {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_get_lcd_clk();
 		else
 			return exynos5_get_lcd_clk();
@@ -1682,7 +1683,7 @@ void set_lcd_clk(void)
 	else {
 		if (proid_is_exynos5250())
 			exynos5_set_lcd_clk();
-		else if (proid_is_exynos5420())
+		else if (proid_is_exynos5420() || proid_is_exynos5800())
 			exynos5420_set_lcd_clk();
 	}
 }
@@ -1696,7 +1697,7 @@ void set_mipi_clk(void)
 int set_spi_clk(int periph_id, unsigned int rate)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_set_spi_clk(periph_id, rate);
 		return exynos5_set_spi_clk(periph_id, rate);
 	} else {
diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
index b6a9bc1831..0aff3d0d0c 100644
--- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
@@ -971,7 +971,7 @@ static void exynos5420_system_clock_init(void)
 
 void system_clock_init(void)
 {
-	if (proid_is_exynos5420())
+	if (proid_is_exynos5420() || proid_is_exynos5800())
 		exynos5420_system_clock_init();
 	else
 		exynos5250_system_clock_init();
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index b86dd2d650..7c0b12ae51 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -464,6 +464,16 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 							+ DMC_OFFSET);
 	pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE;
 
+	if (CONFIG_NR_DRAM_BANKS > 4) {
+		/* Need both controllers. */
+		mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2;
+		mem->chips_per_channel = 2;
+		mem->chips_to_configure = 2;
+	} else {
+		/* 2GB requires a single controller */
+		mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1;
+	}
+
 	/* Enable PAUSE for DREX */
 	setbits_le32(&clk->pause, ENABLE_BIT);
 
@@ -832,6 +842,25 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
 	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
 
+	/*
+	 * As per Exynos5800 UM ver 0.00 section 17.13.2.1
+	 * CONCONTROL register bit 3 [update_mode], Exynos5800 does not
+	 * support the PHY initiated update. And it is recommended to set
+	 * this field to 1'b1 during initialization
+	 *
+	 * When we apply PHY-initiated mode, DLL lock value is determined
+	 * once at DMC init time and not updated later when we change the MIF
+	 * voltage based on ASV group in kernel. Applying MC-initiated mode
+	 * makes sure that DLL tracing is ON so that silicon is able to
+	 * compensate the voltage variation.
+	 */
+	val = readl(&drex0->concontrol);
+	val |= CONCONTROL_UPDATE_MODE;
+	writel(val , &drex0->concontrol);
+	val = readl(&drex1->concontrol);
+	val |= CONCONTROL_UPDATE_MODE;
+	writel(val , &drex1->concontrol);
+
 	return 0;
 }
 #endif
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 3d95dc3339..94d0297051 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -837,7 +837,7 @@ static int exynos4x12_pinmux_config(int peripheral, int flags)
 int exynos_pinmux_config(int peripheral, int flags)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_pinmux_config(peripheral, flags);
 		else if (proid_is_exynos5250())
 			return exynos5_pinmux_config(peripheral, flags);
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index e1ab3d6997..1520d642c5 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -53,10 +53,37 @@ void exynos5_set_usbhost_phy_ctrl(unsigned int enable)
 	}
 }
 
+void exynos4412_set_usbhost_phy_ctrl(unsigned int enable)
+{
+	struct exynos4412_power *power =
+		(struct exynos4412_power *)samsung_get_base_power();
+
+	if (enable) {
+		/* Enabling USBHOST_PHY */
+		setbits_le32(&power->usbhost_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		setbits_le32(&power->hsic1_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		setbits_le32(&power->hsic2_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+	} else {
+		/* Disabling USBHOST_PHY */
+		clrbits_le32(&power->usbhost_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		clrbits_le32(&power->hsic1_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+		clrbits_le32(&power->hsic2_phy_control,
+			     POWER_USB_HOST_PHY_CTRL_EN);
+	}
+}
+
 void set_usbhost_phy_ctrl(unsigned int enable)
 {
 	if (cpu_is_exynos5())
 		exynos5_set_usbhost_phy_ctrl(enable);
+	else if (cpu_is_exynos4())
+		if (proid_is_exynos4412())
+			exynos4412_set_usbhost_phy_ctrl(enable);
 }
 
 static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable)
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
index ae3ad0167d..bc237c969f 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -195,10 +195,16 @@ void copy_uboot_to_ram(void)
 	void (*end_bootop_from_emmc)(void);
 #endif
 #ifdef CONFIG_USB_BOOTING
-	u32 (*usb_copy)(void);
 	int is_cr_z_set;
 	unsigned int sec_boot_check;
 
+	/*
+	 * Note that older hardware (before Exynos5800) does not expect any
+	 * arguments, but it does not hurt to pass them, so a common function
+	 * prototype is used.
+	 */
+	u32 (*usb_copy)(u32 num_of_block, u32 *dst);
+
 	/* Read iRAM location to check for secondary USB boot mode */
 	sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
 	if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
@@ -240,7 +246,7 @@ void copy_uboot_to_ram(void)
 		 */
 		is_cr_z_set = config_branch_prediction(0);
 		usb_copy = get_irom_func(USB_INDEX);
-		usb_copy();
+		usb_copy(0, (u32 *)CONFIG_SYS_TEXT_BASE);
 		config_branch_prediction(is_cr_z_set);
 		break;
 #endif
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ba6dec930b..e5846eac6f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-snow.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5420-smdk5420.dtb \
-	exynos5420-peach-pit.dtb
+	exynos5420-peach-pit.dtb \
+	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
index 2a1f1dda4e..c78efec649 100644
--- a/arch/arm/dts/exynos4412-odroid.dts
+++ b/arch/arm/dts/exynos4412-odroid.dts
@@ -67,4 +67,15 @@
 		div = <0x3>;
 		index = <4>;
 	};
+
+	ehci@12580000 {
+		compatible = "samsung,exynos-ehci";
+		reg = <0x12580000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		phy {
+			compatible = "samsung,exynos-usb-phy";
+			reg = <0x125B0000 0x100>;
+		};
+	};
 };
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 6fd9275c4e..95af02534c 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -131,11 +131,11 @@
 	};
 
 	ehci@12110000 {
-		samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */
+		samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */
 	};
 
 	xhci@12000000 {
-		samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */
+		samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */
 	};
 
 	tmu@10060000 {
diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
new file mode 100644
index 0000000000..8aedf8e707
--- /dev/null
+++ b/arch/arm/dts/exynos5800-peach-pi.dts
@@ -0,0 +1,157 @@
+/*
+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "exynos54xx.dtsi"
+
+/ {
+	model = "Samsung/Google Peach Pi board based on Exynos5800";
+
+	compatible = "google,pit-rev#", "google,pit",
+		"google,peach", "samsung,exynos5800", "samsung,exynos5";
+
+	config {
+		google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+		hwid = "PIT TEST A-A 7848";
+		lazy-init = <1>;
+	};
+
+	aliases {
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		pmic = "/i2c@12ca0000";
+	};
+
+	dmc {
+		mem-manuf = "samsung";
+		mem-type = "ddr3";
+		clock-frequency = <800000000>;
+		arm-frequency = <1700000000>;
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* MAX77802 is on i2c bus 4 */
+	i2c@12ca0000 {
+		clock-frequency = <400000>;
+		power-regulator@9 {
+			compatible = "maxim,max77802-pmic";
+			reg = <0x9>;
+		};
+	};
+
+	i2c@12cd0000 { /* i2c7 */
+		clock-frequency = <100000>;
+	       soundcodec@20 {
+	              reg = <0x20>;
+	              compatible = "maxim,max98090-codec";
+	       };
+
+	        edp-lvds-bridge@48 {
+	                compatible = "parade,ps8625";
+	                reg = <0x48>;
+	        };
+	};
+
+        sound@3830000 {
+                samsung,codec-type = "max98090";
+        };
+
+	i2c@12e10000 { /* i2c9 */
+		clock-frequency = <400000>;
+                tpm@20 {
+                        compatible = "infineon,slb9645-tpm";
+                        reg = <0x20>;
+		};
+	};
+
+	spi@12d30000 { /* spi1 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+
+			/*
+			 * A region for the kernel to store a panic event
+			 * which the firmware will add to the log.
+			*/
+			elog-panic-event-offset = <0x01e00000 0x100000>;
+
+			elog-shrink-size = <0x400>;
+			elog-full-threshold = <0xc00>;
+		};
+	};
+
+	spi@12d40000 { /* spi2 */
+		spi-max-frequency = <4000000>;
+		spi-deactivate-delay = <200>;
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-half-duplex;
+			spi-max-timeout-ms = <1100>;
+			spi-frame-header = <0xec>;
+			ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+
+			/*
+			 * This describes the flash memory within the EC. Note
+			 * that the STM32L flash erases to 0, not 0xff.
+			 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			flash@8000000 {
+				reg = <0x08000000 0x20000>;
+				erase-value = <0>;
+			};
+		};
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+	};
+
+	xhci@12400000 {
+		samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1920>;
+		samsung,vl-row = <1080>;
+		samsung,vl-width = <1920>;
+		samsung,vl-height = <1080>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <80>;
+		samsung,vl-hbpd = <172>;
+		samsung,vl-hfpd = <60>;
+		samsung,vl-vspw = <10>;
+		samsung,vl-vbpd = <25>;
+		samsung,vl-vfpd = <10>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+};
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 78aceef17b..29674ad4da 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -227,6 +227,13 @@ static inline void s5p_set_cpu_id(void)
 		/* Exynos5420 */
 		s5p_cpu_id = 0x5420;
 		break;
+	case 0x422:
+		/*
+		 * Exynos5800 is a variant of Exynos5420
+		 * and has product id 0x5422
+		 */
+		s5p_cpu_id = 0x5800;
+		break;
 	}
 }
 
@@ -255,6 +262,7 @@ IS_EXYNOS_TYPE(exynos4210, 0x4210)
 IS_EXYNOS_TYPE(exynos4412, 0x4412)
 IS_EXYNOS_TYPE(exynos5250, 0x5250)
 IS_EXYNOS_TYPE(exynos5420, 0x5420)
+IS_EXYNOS_TYPE(exynos5800, 0x5800)
 
 #define SAMSUNG_BASE(device, base)				\
 static inline unsigned int __attribute__((no_instrument_function)) \
@@ -265,7 +273,7 @@ static inline unsigned int __attribute__((no_instrument_function)) \
 			return EXYNOS4X12_##base;		\
 		return EXYNOS4_##base;				\
 	} else if (cpu_is_exynos5()) {				\
-		if (proid_is_exynos5420())			\
+		if (proid_is_exynos5420() || proid_is_exynos5800())	\
 			return EXYNOS5420_##base;		\
 		return EXYNOS5_##base;				\
 	}							\
diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h
index ec3f9b6ee1..4990a1af39 100644
--- a/arch/arm/include/asm/arch-exynos/dmc.h
+++ b/arch/arm/include/asm/arch-exynos/dmc.h
@@ -450,6 +450,7 @@ enum mem_manuf {
 #define CONCONTROL_RD_FETCH_SHIFT	12
 #define CONCONTROL_RD_FETCH_MASK	(0x7 << CONCONTROL_RD_FETCH_SHIFT)
 #define CONCONTROL_AREF_EN_SHIFT	5
+#define CONCONTROL_UPDATE_MODE		(1 << 3)
 
 /* PRECHCONFIG register field */
 #define PRECHCONFIG_TP_CNT_SHIFT	24
diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h
index d2d70bd82b..3800fa9044 100644
--- a/arch/arm/include/asm/arch-exynos/ehci.h
+++ b/arch/arm/include/asm/arch-exynos/ehci.h
@@ -12,6 +12,13 @@
 
 #define CLK_24MHZ		5
 
+#define PHYPWR_NORMAL_MASK_PHY0                 (0x39 << 0)
+#define PHYPWR_NORMAL_MASK_PHY1                 (0x7 << 6)
+#define PHYPWR_NORMAL_MASK_HSIC0                (0x7 << 9)
+#define PHYPWR_NORMAL_MASK_HSIC1                (0x7 << 12)
+#define RSTCON_HOSTPHY_SWRST                    (0xf << 3)
+#define RSTCON_SWRST                            (0x1 << 0)
+
 #define HOST_CTRL0_PHYSWRSTALL			(1 << 31)
 #define HOST_CTRL0_COMMONON_N			(1 << 9)
 #define HOST_CTRL0_SIDDQ			(1 << 6)
@@ -61,6 +68,12 @@ struct exynos_usb_phy {
 	unsigned int usbotgtune;
 };
 
+struct exynos4412_usb_phy {
+	unsigned int usbphyctrl;
+	unsigned int usbphyclk;
+	unsigned int usbphyrstcon;
+};
+
 /* Switch on the VBUS power. */
 int board_usb_vbus_init(void);
 
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index 02287decc2..9699954a7d 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -1398,7 +1398,7 @@ static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = {
 static inline struct gpio_info *get_gpio_data(void)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return exynos5420_gpio_data;
 		else
 			return exynos5_gpio_data;
@@ -1415,7 +1415,7 @@ static inline struct gpio_info *get_gpio_data(void)
 static inline unsigned int get_bank_num(void)
 {
 	if (cpu_is_exynos5()) {
-		if (proid_is_exynos5420())
+		if (proid_is_exynos5420() || proid_is_exynos5800())
 			return EXYNOS5420_GPIO_NUM_PARTS;
 		else
 			return EXYNOS5_GPIO_NUM_PARTS;
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index e8a98a5471..3f97b31aea 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -210,6 +210,13 @@ struct exynos4_power {
 	unsigned int	gps_alive_option;
 };
 
+struct exynos4412_power {
+	unsigned char	res1[0x0704];
+	unsigned int	usbhost_phy_control;
+	unsigned int	hsic1_phy_control;
+	unsigned int	hsic2_phy_control;
+};
+
 struct exynos5_power {
 	unsigned int	om_stat;
 	unsigned char	res1[0x18];
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index 33003ee9b5..b7d23817e1 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -382,6 +382,22 @@ static void board_gpio_init(void)
 	gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP);
 	gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X);
 	gpio_direction_input(EXYNOS4X12_GPIO_X31);
+
+	/* Blue LED (Odroid X2/U2/U3) */
+	gpio_request(EXYNOS4X12_GPIO_C10, "Blue LED");
+
+	gpio_direction_output(EXYNOS4X12_GPIO_C10, 0);
+
+#ifdef CONFIG_CMD_USB
+	/* USB3503A Reference frequency */
+	gpio_request(EXYNOS4X12_GPIO_X30, "USB3503A RefFreq");
+
+	/* USB3503A Connect */
+	gpio_request(EXYNOS4X12_GPIO_X34, "USB3503A Connect");
+
+	/* USB3503A Reset */
+	gpio_request(EXYNOS4X12_GPIO_X35, "USB3503A Reset");
+#endif
 }
 
 static int pmic_init_max77686(void)
@@ -462,9 +478,39 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
 	.usb_phy_ctrl	= EXYNOS4X12_USBPHY_CONTROL,
 	.usb_flags	= PHY0_SLEEP,
 };
+#endif
+
+#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB)
 
 int board_usb_init(int index, enum usb_init_type init)
 {
+#ifdef CONFIG_CMD_USB
+	struct pmic *p_pmic;
+
+	/* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
+	/* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
+	if (gd->board_type == ODROID_TYPE_U3)
+		gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
+	else
+		gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
+
+	/* Disconnect, Reset, Connect */
+	gpio_direction_output(EXYNOS4X12_GPIO_X34, 0);
+	gpio_direction_output(EXYNOS4X12_GPIO_X35, 0);
+	gpio_direction_output(EXYNOS4X12_GPIO_X35, 1);
+	gpio_direction_output(EXYNOS4X12_GPIO_X34, 1);
+
+	/* Power off and on BUCK8 for LAN9730 */
+	debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
+
+	p_pmic = pmic_get("MAX77686_PMIC");
+	if (p_pmic && !pmic_probe(p_pmic)) {
+		max77686_set_buck_voltage(p_pmic, 8, 750000);
+		max77686_set_buck_voltage(p_pmic, 8, 3300000);
+	}
+
+#endif
+
 	debug("USB_udc_probe\n");
 	return s3c_udc_probe(&s5pc210_otg_data);
 }
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index d3a5b7f7d7..e7aafe5beb 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -1,3 +1,19 @@
+if TARGET_PEACH_PI
+
+config SYS_BOARD
+	string
+	default "smdk5420"
+
+config SYS_VENDOR
+	string
+	default "samsung"
+
+config SYS_CONFIG_NAME
+	string
+	default "peach-pi"
+
+endif
+
 if TARGET_PEACH_PIT
 
 config SYS_BOARD
diff --git a/board/samsung/smdk5420/MAINTAINERS b/board/samsung/smdk5420/MAINTAINERS
index e0f5c7a530..1423f83995 100644
--- a/board/samsung/smdk5420/MAINTAINERS
+++ b/board/samsung/smdk5420/MAINTAINERS
@@ -6,3 +6,5 @@ F:	include/configs/peach-pit.h
 F:	configs/peach-pit_defconfig
 F:	include/configs/smdk5420.h
 F:	configs/smdk5420_defconfig
+F:	include/configs/peach-pi.h
+F:	configs/peach-pi_defconfig
diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
new file mode 100644
index 0000000000..8ada0dbe40
--- /dev/null
+++ b/configs/peach-pi_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_EXYNOS=y
++S:CONFIG_TARGET_PEACH_PI=y
+CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi"
diff --git a/doc/README.odroid b/doc/README.odroid
index 528bb95279..25b962b9f1 100644
--- a/doc/README.odroid
+++ b/doc/README.odroid
@@ -141,3 +141,172 @@ And the boot sequence is:
 - boot_fit - if "Image.itb" exists
 - boot_zimg - if "zImage" exists
 - boot_uimg - if "uImage" exists
+
+11. USB host support
+====================
+
+The ethernet can be accessed after starting the USB subsystem in U-Boot.
+The adapter does not come with a preconfigured MAC address, and hence it needs
+to be set before starting USB.
+setenv usbethaddr 02:DE:AD:BE:EF:FF
+
+Note that in this example a locally managed MAC address is chosen. Care should
+be taken to make these MAC addresses unique within the same subnet.
+
+Start the USB subsystem:
+Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
+Odroid # usb start
+(Re)start USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 4 USB Device(s) found
+       scanning usb for storage devices... 1 Storage Device(s) found
+       scanning usb for ethernet devices... 1 Ethernet Device(s) found
+Odroid #
+
+Automatic IP assignment:
+------------------------
+If the ethernet is connected to a DHCP server (router maybe with DHCP enabled),
+then the below will automatically assign an ip address through DHCP.
+setenv autoload no
+dhcp
+
+Odroid # setenv autoload no
+Odroid # dhcp
+Waiting for Ethernet connection... done.
+BOOTP broadcast 1
+DHCP client bound to address 192.168.1.10 (524 ms)
+Odroid #
+
+Note that this automatically sets the many IP address related variables in
+U-Boot that is obtained from the DHCP server.
+
+Odroid # printenv ipaddr netmask gatewayip dnsip
+ipaddr=192.168.1.10
+netmask=255.255.255.0
+gatewayip=192.168.1.1
+dnsip=192.168.1.1
+
+Ping example:
+The ping command can be used a test to check connectivity. In this example,
+192.168.1.27 is a pingable server in the network.
+Odroid # ping 192.168.1.27
+Waiting for Ethernet connection... done.
+Using sms0 device
+host 192.168.1.27 is alive
+Odroid #
+
+Static IP assignment:
+---------------------
+In the case where there are no DHCP servers in the network, or you want to
+set the IP address statically, it can be done by:
+Odroid # setenv ipaddr 192.168.1.10
+Odroid # ping 192.168.1.27
+Waiting for Ethernet connection... done.
+Using sms0 device
+host 192.168.1.27 is alive
+
+TFTP booting:
+-------------
+Say there exists a tftp server in the network with address 192.168.1.27 and
+it serves a kernel image (zImage.3.17) and a DTB blob (exynos4412-odroidu3.dtb)
+that needs to be loaded and booted. It can be accomplished as below:
+(Assumes that you have setenv usbethaddr, and have not set autoload to no)
+
+Odroid # setenv serverip 192.168.1.27
+Odroid # tftpboot 0x40080000 zImage.3.17
+Waiting for Ethernet connection... done.
+Using sms0 device
+TFTP from server 192.168.1.27; our IP address is 192.168.1.10
+Filename 'zImage.3.17'.
+Load address: 0x40080000
+Loading: #################################################################
+	 #################################################################
+	 #################################################################
+	 #######################
+	 52.7 KiB/s
+done
+Bytes transferred = 3194200 (30bd58 hex)
+Odroid # tftpboot 0x42000000 exynos4412-odroidu3.dtb
+Waiting for Ethernet connection... done.
+Using sms0 device
+TFTP from server 192.168.1.27; our IP address is 192.168.1.10
+Filename 'exynos4412-odroidu3.dtb'.
+Load address: 0x42000000
+Loading: ####
+	 40 KiB/s
+done
+Bytes transferred = 46935 (b757 hex)
+Odroid # printenv bootargs
+bootargs=Please use defined boot
+Odroid # setenv bootargs console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootwait
+Odroid # bootz 40080000 - 42000000
+Kernel image @ 0x40080000 [ 0x000000 - 0x30bd58 ]
+## Flattened Device Tree blob at 42000000
+   Booting using the fdt blob at 0x42000000
+   Loading Device Tree to 4fff1000, end 4ffff756 ... OK
+
+Starting kernel ...
+
+[    0.000000] Booting Linux on physical CPU 0xa00
+... etc ...
+
+In the above example you can substitute 'dhcp' for 'tftpboot' as well.
+
+USB Storage booting:
+--------------------
+Similarly we can use the USB storage to load the kernel image/initrd/fdt etc
+and boot. For this example, there is a USB drive plugged in. It has a FAT
+1st partition and an EXT 2nd partition. Using the generic FS (ls/load) makes
+it even easier to work with FAT/EXT file systems.
+For this example the second EXT partition is used for booting and as rootfs.
+The boot files - kernel and the dtb are present in the /boot directory of the
+second partition.
+
+Odroid # usb start
+(Re)start USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 4 USB Device(s) found
+       scanning usb for storage devices... 1 Storage Device(s) found
+       scanning usb for ethernet devices...
+Error: sms0 address not set.		<----- Note the error as usbethaddr
+Warning: failed to set MAC address	<----- is not set.
+1 Ethernet Device(s) found
+Odroid # usb part 0
+
+Partition Map for USB device 0  --   Partition Type: DOS
+
+Part	Start Sector	Num Sectors	UUID		Type
+  1	3072      	263168    	000c4046-01	06
+  2	266240    	13457408  	000c4046-02	83
+
+Odroid # ls usb 0:2 /boot
+<DIR>       4096 .
+<DIR>       4096 ..
+             353 boot.scr
+             281 boot.txt
+          101420 config-3.8.13.23
+         2127254 initrd.img-3.8.13.23
+         2194825 uInitrd
+         2194825 uInitrd-3.8.13.23
+         2453112 zImage
+          101448 config-3.8.13.26
+         2127670 uInitrd-3.8.13.26
+         2127606 initrd.img-3.8.13.26
+         3194200 zImage.3.17                    <--- Kernel
+           46935 exynos4412-odroidu3.dtb        <--- DTB
+Odroid # load usb 0:2 40080000 /boot/zImage.3.17
+3194200 bytes read in 471 ms (6.5 MiB/s)
+Odroid # load usb 0:2 42000000 /boot/exynos4412-odroidu3.dtb
+46935 bytes read in 233 ms (196.3 KiB/s)
+Odroid # setenv bootargs console=ttySAC1,115200n8 root=/dev/sda2 rootwait
+Odroid # bootz 40080000 - 42000000
+Kernel image @ 0x40080000 [ 0x000000 - 0x30bd58 ]
+## Flattened Device Tree blob at 42000000
+   Booting using the fdt blob at 0x42000000
+   Loading Device Tree to 4fff1000, end 4ffff756 ... OK
+
+Starting kernel ...
+
+[    0.000000] Booting Linux on physical CPU 0xa00
+
+Please refer to README.usb for additional information.
diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
index df1fd91de3..95b1a57ca2 100644
--- a/drivers/power/pmic/pmic_max77686.c
+++ b/drivers/power/pmic/pmic_max77686.c
@@ -42,11 +42,30 @@ static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
 	return 0;
 }
 
+static int max77686_buck_volt2hex(int buck, ulong uV)
+{
+	int hex = 0;
+
+	if (buck < 5 || buck > 9) {
+		debug("%s: buck %d is not supported\n", __func__, buck);
+		return -EINVAL;
+	}
+
+	hex = (uV - 750000) / 50000;
+
+	if (hex >= 0 && hex <= MAX77686_BUCK_VOLT_MAX_HEX)
+		return hex;
+
+	debug("%s: %ld is wrong voltage value for BUCK%d\n",
+	      __func__, uV, buck);
+	return -EINVAL;
+}
+
 int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
 {
 	unsigned int val, ret, hex, adr;
 
-	if (ldo < 1 && ldo > 26) {
+	if (ldo < 1 || ldo > 26) {
 		printf("%s: %d is wrong ldo number\n", __func__, ldo);
 		return -1;
 	}
@@ -68,11 +87,38 @@ int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
 	return ret;
 }
 
+int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV)
+{
+	unsigned int val, adr;
+	int hex, ret;
+
+	if (buck < 5 || buck > 9) {
+		printf("%s: %d is an unsupported bucket number\n",
+		       __func__, buck);
+		return -EINVAL;
+	}
+
+	adr = max77686_buck_addr[buck] + 1;
+	hex = max77686_buck_volt2hex(buck, uV);
+
+	if (hex < 0)
+		return hex;
+
+	ret = pmic_reg_read(p, adr, &val);
+	if (ret)
+		return ret;
+
+	val &= ~MAX77686_BUCK_VOLT_MASK;
+	ret |= pmic_reg_write(p, adr, val | hex);
+
+	return ret;
+}
+
 int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
 {
 	unsigned int val, ret, adr, mode;
 
-	if (ldo < 1 && 26 < ldo) {
+	if (ldo < 1 || 26 < ldo) {
 		printf("%s: %d is wrong ldo number\n", __func__, ldo);
 		return -1;
 	}
@@ -157,7 +203,7 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
 	/* mode */
 	switch (opmode) {
 	case OPMODE_OFF:
-		mode = MAX77686_BUCK_MODE_OFF;
+		mode = MAX77686_BUCK_MODE_OFF << mode_shift;
 		break;
 	case OPMODE_STANDBY:
 		switch (buck) {
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index edd91a84a7..6fdbf5724f 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -85,15 +85,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
 }
 #endif
 
-/* Setup the EHCI host controller. */
-static void setup_usb_phy(struct exynos_usb_phy *usb)
+static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
 {
 	u32 hsic_ctrl;
 
-	set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
-
-	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
-
 	clrbits_le32(&usb->usbphyctrl0,
 			HOST_CTRL0_FSEL_MASK |
 			HOST_CTRL0_COMMONON_N |
@@ -150,8 +145,34 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
 			EHCICTRL_ENAINCR16);
 }
 
-/* Reset the EHCI host controller. */
-static void reset_usb_phy(struct exynos_usb_phy *usb)
+static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
+{
+	writel(CLK_24MHZ, &usb->usbphyclk);
+
+	clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
+		PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
+		PHYPWR_NORMAL_MASK_PHY0));
+
+	setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
+	udelay(10);
+	clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
+}
+
+static void setup_usb_phy(struct exynos_usb_phy *usb)
+{
+	set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
+
+	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
+
+	if (cpu_is_exynos5())
+		exynos5_setup_usb_phy(usb);
+	else if (cpu_is_exynos4())
+		if (proid_is_exynos4412())
+			exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)
+						 usb);
+}
+
+static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
 {
 	u32 hsic_ctrl;
 
@@ -171,6 +192,24 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
 
 	setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
 	setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+}
+
+static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
+{
+	setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
+		PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
+		PHYPWR_NORMAL_MASK_PHY0));
+}
+
+/* Reset the EHCI host controller. */
+static void reset_usb_phy(struct exynos_usb_phy *usb)
+{
+	if (cpu_is_exynos5())
+		exynos5_reset_usb_phy(usb);
+	else if (cpu_is_exynos4())
+		if (proid_is_exynos4412())
+			exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)
+						 usb);
 
 	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
 }
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index aa6b631c5d..81e8a7c3a3 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -9,6 +9,9 @@
 #ifndef __CONFIG_ARNDALE_H
 #define __CONFIG_ARNDALE_H
 
+#define EXYNOS_FDTFILE_SETTING \
+	"fdtfile=exynos5250-arndale.dtb\0"
+
 #include "exynos5250-common.h"
 
 /* SD/MMC configuration */
@@ -17,8 +20,6 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_CMD_EXT2
-
 /* USB */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_EXYNOS
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index b258cb93c4..1f3ee55098 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -30,9 +30,6 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
-/* Enable fdt support */
-#define CONFIG_OF_LIBFDT
-
 /* Keep L2 Cache Disabled */
 #define CONFIG_CMD_CACHE
 
@@ -42,7 +39,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_ENV_OVERWRITE
 
 /* Size of malloc() pool before and after relocation */
@@ -61,7 +57,6 @@
 #define CONFIG_EXYNOS_DWMMC
 #define CONFIG_BOUNCE_BUFFER
 
-#define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
 /* PWM */
@@ -71,22 +66,16 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
 #define CONFIG_CMD_FS_GENERIC
 
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_PART
 #define CONFIG_PARTITION_UUIDS
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		384	/* Print Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		1024	/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 
 /* Boot Argument Buffer Size */
@@ -96,4 +85,6 @@
 #define CONFIG_SYS_NO_FLASH
 #undef CONFIG_CMD_IMLS
 
+#include <config_distro_defaults.h>
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index ba591e7c1e..8f9b780003 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -47,17 +47,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_CONSOLE_MUX
 
-#define EXYNOS_DEVICE_SETTINGS \
-		"stdin=serial\0" \
-		"stdout=serial\0" \
-		"stderr=serial\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	EXYNOS_DEVICE_SETTINGS
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_HASH
 
 /* Thermal Management Unit */
@@ -174,12 +163,6 @@
 #define CONFIG_ENV_SROM_BANK		1
 #endif /*CONFIG_CMD_NET*/
 
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
 /* SHA hashing */
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
@@ -189,8 +172,6 @@
 /* Enable Time Command */
 #define CONFIG_CMD_TIME
 
-#define CONFIG_CMD_BOOTZ
-
 #define CONFIG_CMD_GPIO
 
 /* USB boot mode */
@@ -203,4 +184,41 @@
 #define CONFIG_FIT
 #define CONFIG_FIT_BEST_MATCH
 
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#ifndef MEM_LAYOUT_ENV_SETTINGS
+/* 2GB RAM, bootm size of 256M, load scripts after that */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"bootm_size=0x10000000\0" \
+	"kernel_addr_r=0x42000000\0" \
+	"fdt_addr_r=0x43000000\0" \
+	"ramdisk_addr_r=0x43300000\0" \
+	"scriptaddr=0x50000000\0" \
+	"pxefile_addr_r=0x51000000\0"
+#endif
+
+#ifndef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
+#ifndef EXYNOS_FDTFILE_SETTING
+#define EXYNOS_FDTFILE_SETTING
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	EXYNOS_DEVICE_SETTINGS \
+	EXYNOS_FDTFILE_SETTING \
+	MEM_LAYOUT_ENV_SETTINGS \
+	BOOTENV
+
 #endif	/* __CONFIG_EXYNOS5_COMMON_H */
diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h
index 66547fa34e..9cef0b0a38 100644
--- a/include/configs/exynos5-dt-common.h
+++ b/include/configs/exynos5-dt-common.h
@@ -9,6 +9,13 @@
 #ifndef __CONFIG_EXYNOS5_DT_COMMON_H
 #define __CONFIG_EXYNOS5_DT_COMMON_H
 
+/* Console configuration */
+#undef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+		"stdin=serial,cros-ec-keyb\0" \
+		"stdout=serial,lcd\0" \
+		"stderr=serial,lcd\0"
+
 #include "exynos5-common.h"
 
 /* PMIC */
@@ -22,14 +29,4 @@
 #define CONFIG_CMD_CROS_EC
 #define CONFIG_KEYBOARD
 
-/* Console configuration */
-#undef EXYNOS_DEVICE_SETTINGS
-#define EXYNOS_DEVICE_SETTINGS \
-		"stdin=serial,cros-ec-keyb\0" \
-		"stdout=serial,lcd\0" \
-		"stderr=serial,lcd\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	EXYNOS_DEVICE_SETTINGS
-
 #endif
diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h
index 713614f3ad..a0107e8b4d 100644
--- a/include/configs/exynos5250-common.h
+++ b/include/configs/exynos5250-common.h
@@ -29,8 +29,6 @@
 
 #define CONFIG_SPL_TEXT_BASE	0x02023400
 
-#define CONFIG_BOOTCOMMAND	"mmc read 40007000 451 2000; bootm 40007000"
-
 #define CONFIG_IRAM_STACK	0x02050000
 
 #define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h
index b0f940cd16..ef6e1551ab 100644
--- a/include/configs/exynos5420-common.h
+++ b/include/configs/exynos5420-common.h
@@ -10,6 +10,8 @@
 #define __CONFIG_EXYNOS5420_H
 
 #define CONFIG_EXYNOS5420
+/* A variant of Exynos5420 (Exynos5 Family) */
+#define CONFIG_EXYNOS5800
 
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SPI_FLASH
@@ -38,14 +40,13 @@
 
 #define CONFIG_SPL_MAX_FOOTPRINT	(30 * 1024)
 
-#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420"
+#define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi"	\
+				"exynos5420-peach-pit exynos5420-smdk5420"
 
 #define CONFIG_MAX_I2C_NUM	11
 
 #define CONFIG_BOARD_REV_GPIO_COUNT	2
 
-#define CONFIG_BOOTCOMMAND	"mmc read 20007000 451 2000; bootm 20007000"
-
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
 
 /*
@@ -54,10 +55,6 @@
  */
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
 
-/* DRAM Memory Banks */
-#define CONFIG_NR_DRAM_BANKS	7
-#define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
-
 /* Miscellaneous configurable options */
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
 
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index b928af839e..807e96bbaa 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -198,6 +198,19 @@
 
 #define CONFIG_CMD_GPIO
 
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
 /*
  * Supported Odroid boards: X3, U3
  * TODO: Add Odroid X support
diff --git a/include/configs/origen.h b/include/configs/origen.h
index da9d6a1ee1..8f1e25696e 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -56,6 +56,10 @@
 #undef CONFIG_CMD_PING
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
 
@@ -63,7 +67,36 @@
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 #define CONFIG_SPL_TEXT_BASE	0x02021410
 
-#define CONFIG_BOOTCOMMAND	"fatload mmc 0 40007000 uImage; bootm 40007000"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x40007000\0" \
+	"rdaddr=0x48000000\0" \
+	"kerneladdr=0x40007000\0" \
+	"ramdiskaddr=0x48000000\0" \
+	"console=ttySAC2,115200n8\0" \
+	"mmcdev=0\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t $loadaddr $filesize\0" \
+        "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+        "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+                "source ${loadaddr}\0"
+#define CONFIG_BOOTCOMMAND \
+	"if mmc rescan; then " \
+		"echo SD/MMC found on device ${mmcdev};" \
+		"if run loadbootenv; then " \
+			"echo Loaded environment from ${bootenv};" \
+			"run importbootenv;" \
+		"fi;" \
+		"if test -n $uenvcmd; then " \
+			"echo Running uenvcmd ...;" \
+			"run uenvcmd;" \
+		"fi;" \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"fi; " \
+	"fi;" \
+	"load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
 
 #define CONFIG_IDENT_STRING		" for ORIGEN"
 
diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h
new file mode 100644
index 0000000000..8a82402ec1
--- /dev/null
+++ b/include/configs/peach-pi.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG/GOOGLE PEACH-PI board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_PEACH_PI_H
+#define __CONFIG_PEACH_PI_H
+
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE	0x12D30000
+#define FLASH_SIZE		(0x4 << 20)
+#define CONFIG_ENV_OFFSET	(FLASH_SIZE - CONFIG_BL2_SIZE)
+
+#include <configs/exynos5420-common.h>
+#include <configs/exynos5-dt-common.h>
+
+#define CONFIG_BOARD_COMMON
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3		/* use SERIAL 3 */
+
+#define CONFIG_SYS_PROMPT	"Peach-Pi # "
+#define CONFIG_IDENT_STRING	" for Peach-Pi"
+
+#define CONFIG_VIDEO_PARADE
+
+/* Display */
+#define CONFIG_LCD
+#ifdef CONFIG_LCD
+#define CONFIG_EXYNOS_FB
+#define CONFIG_EXYNOS_DP
+#define LCD_BPP			LCD_COLOR16
+#endif
+
+#define CONFIG_POWER_TPS65090_EC
+#define CONFIG_CROS_EC_SPI		/* Support CROS_EC over SPI */
+#define CONFIG_DM_CROS_EC
+
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
+
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS	7
+#define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
+
+#endif	/* __CONFIG_PEACH_PI_H */
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 91bd37d6bc..ad5db57f5f 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -23,8 +23,8 @@
 /* select serial console configuration */
 #define CONFIG_SERIAL3		/* use SERIAL 3 */
 
-#define CONFIG_SYS_PROMPT	"Peach # "
-#define CONFIG_IDENT_STRING	" for Peach"
+#define CONFIG_SYS_PROMPT	"Peach-Pit # "
+#define CONFIG_IDENT_STRING	" for Peach-Pit"
 
 #define CONFIG_VIDEO_PARADE
 
@@ -43,4 +43,8 @@
 #define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_EXYNOS
 
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS	4
+#define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
+
 #endif	/* __CONFIG_PEACH_PIT_H */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index b83c15f01f..71eb81c2f7 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -23,6 +23,8 @@
 
 #define CONFIG_SYS_TEXT_BASE	0x0
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
 
 /* input clock of PLL (the SMDK2410 has 12MHz input clock) */
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
index fd2d482e4a..5c9a3c0b21 100644
--- a/include/configs/smdk5420.h
+++ b/include/configs/smdk5420.h
@@ -23,4 +23,8 @@
 #define CONFIG_IDENT_STRING	" for SMDK5420"
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
 
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS	7
+#define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
+
 #endif	/* __CONFIG_SMDK5420_H */
diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
index c2a772a895..b0e42550a2 100644
--- a/include/power/max77686_pmic.h
+++ b/include/power/max77686_pmic.h
@@ -150,6 +150,7 @@ enum {
 
 int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
 int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
+int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV);
 int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
 
 #define MAX77686_LDO_VOLT_MAX_HEX	0x3f
@@ -159,6 +160,8 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
 #define MAX77686_LDO_MODE_STANDBY	(0x01 << 0x06)
 #define MAX77686_LDO_MODE_LPM		(0x02 << 0x06)
 #define MAX77686_LDO_MODE_ON		(0x03 << 0x06)
+#define MAX77686_BUCK_VOLT_MAX_HEX	0x3f
+#define MAX77686_BUCK_VOLT_MASK		0x3f
 #define MAX77686_BUCK_MODE_MASK		0x03
 #define MAX77686_BUCK_MODE_SHIFT_1	0x00
 #define MAX77686_BUCK_MODE_SHIFT_2	0x04