summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndy Fleming <afleming@freescale.com>2011-04-13 00:37:12 -0500
committerAndy Fleming <afleming@freescale.com>2011-04-20 15:09:35 -0500
commit865ff856403fb4bec6fe7f18101364384880068f (patch)
tree10d0d27dd3ae1d484bf5920ce4d1be4fcb786ab1
parent063c12633d5ad74d52152d9c358e715475e17629 (diff)
downloadblackbird-obmc-uboot-865ff856403fb4bec6fe7f18101364384880068f.tar.gz
blackbird-obmc-uboot-865ff856403fb4bec6fe7f18101364384880068f.zip
fsl: Change fsl_phy_enet_if to phy_interface_t
The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum. This meant that drivers which used fsl_phy_enet_if to deal with PHY interfaces would have to convert between the two (or we would have to have them mirror each other, and deal with the ensuing maintenance headache). Instead, we switch all clients of fsl_phy_enet_if over to phy_interface_t, which should become the standard, anyway. Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c23
-rw-r--r--arch/powerpc/include/asm/fsl_enet.h17
-rw-r--r--board/freescale/mpc8360emds/mpc8360emds.c10
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c3
-rw-r--r--board/freescale/mpc8569mds/mpc8569mds.c4
-rw-r--r--drivers/qe/uec.c56
-rw-r--r--drivers/qe/uec.h3
-rw-r--r--drivers/qe/uec_phy.c36
-rw-r--r--include/configs/MPC8323ERDB.h4
-rw-r--r--include/configs/MPC832XEMDS.h4
-rw-r--r--include/configs/MPC8360EMDS.h4
-rw-r--r--include/configs/MPC8360ERDK.h4
-rw-r--r--include/configs/MPC8568MDS.h4
-rw-r--r--include/configs/MPC8569MDS.h20
-rw-r--r--include/configs/kmeter1.h2
15 files changed, 86 insertions, 108 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 0c166fd6c9..520cb90280 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -27,8 +27,8 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/mp.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_serdes.h>
+#include <phy.h>
#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
@@ -218,27 +218,10 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
}
#endif
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
- static const char *fsl_phy_enet_if_str[] = {
- [MII] = "mii",
- [RMII] = "rmii",
- [GMII] = "gmii",
- [RGMII] = "rgmii",
- [RGMII_ID] = "rgmii-id",
- [RGMII_RXID] = "rgmii-rxid",
- [SGMII] = "sgmii",
- [TBI] = "tbi",
- [RTBI] = "rtbi",
- [XAUI] = "xgmii",
- [FSL_ETH_IF_NONE] = "",
- };
-
- if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
- return fdt_setprop_string(blob, offset, "phy-connection-type", "");
-
return fdt_setprop_string(blob, offset, "phy-connection-type",
- fsl_phy_enet_if_str[phyc]);
+ phy_string_for_interface(phyc));
}
#ifdef CONFIG_SYS_SRIO
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 1f8f8e493f..8227b667cb 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -13,20 +13,7 @@
#ifndef __ASM_PPC_FSL_ENET_H
#define __ASM_PPC_FSL_ENET_H
-enum fsl_phy_enet_if {
- MII,
- RMII,
- GMII,
- RGMII,
- RGMII_ID,
- RGMII_RXID,
- RGMII_TXID,
- SGMII,
- TBI,
- RTBI,
- XAUI,
- FSL_ETH_IF_NONE,
-};
+#include <phy.h>
struct tsec_mii_mng {
u32 miimcfg; /* MII management configuration reg */
@@ -38,6 +25,6 @@ struct tsec_mii_mng {
u32 ifstat; /* Interface Status Register */
} __attribute__ ((packed));
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc);
#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 0babd2648a..51d8035203 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -16,6 +16,7 @@
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <phy.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
@@ -160,8 +161,9 @@ int board_eth_init(bd_t *bd)
int i;
for (i = 0; i < ARRAY_SIZE(uec_info); i++)
- uec_info[i].enet_interface_type = RGMII_RXID;
- uec_info[i].speed = 1000;
+ uec_info[i].enet_interface_type =
+ PHY_INTERFACE_MODE_RGMII_RXID;
+ uec_info[i].speed = SPEED_1000;
}
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
}
@@ -398,7 +400,7 @@ void ft_board_setup(void *blob, bd_t *bd)
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
#if defined(CONFIG_HAS_ETH1)
@@ -410,7 +412,7 @@ void ft_board_setup(void *blob, bd_t *bd)
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
}
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index ee1ebd98ba..650a4fe483 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -22,6 +22,7 @@
#include <fdt_support.h>
#include <fsl_esdhc.h>
#include <fsl_mdio.h>
+#include <phy.h>
#include "pci.h"
#include "../common/pq-mds-pib.h"
@@ -155,7 +156,7 @@ static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
return;
}
- err = fdt_fixup_phy_connection(blob, off, SGMII);
+ err = fdt_fixup_phy_connection(blob, off, PHY_INTERFACE_MODE_SGMII);
if (err) {
printf("WARNING: could not set phy-connection-type for %s: "
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index ecda222990..89557d221f 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -39,6 +39,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <phy.h>
#include "bcsr.h"
#if defined(CONFIG_PQ_MDS_PIB)
@@ -550,7 +551,8 @@ void ft_board_setup(void *blob, bd_t *bd)
break;
}
- err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
+ err = fdt_fixup_phy_connection(blob, nodeoff,
+ PHY_INTERFACE_MODE_RMII);
if (err < 0) {
printf("WARNING: could not set phy-connection-type "
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index cd80f83522..1ecb1379a5 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -30,6 +30,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
/* Default UTBIPAR SMI address */
#ifndef CONFIG_UTBIPAR_INIT_TBIPA
@@ -321,9 +322,9 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
}
static int uec_set_mac_if_mode(uec_private_t *uec,
- enum fsl_phy_enet_if if_mode, int speed)
+ phy_interface_t if_mode, int speed)
{
- enum fsl_phy_enet_if enet_if_mode;
+ phy_interface_t enet_if_mode;
uec_info_t *uec_info;
uec_t *uec_regs;
u32 upsmr;
@@ -345,15 +346,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
switch (speed) {
- case 10:
+ case SPEED_10:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= (UPSMR_RPM | UPSMR_R10M);
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= (UPSMR_R10M | UPSMR_RMM);
break;
default:
@@ -361,15 +362,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
break;
}
break;
- case 100:
+ case SPEED_100:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= UPSMR_RMM;
break;
default:
@@ -377,23 +378,24 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
break;
}
break;
- case 1000:
+ case SPEED_1000:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
switch (enet_if_mode) {
- case GMII:
+ case PHY_INTERFACE_MODE_GMII:
break;
- case TBI:
+ case PHY_INTERFACE_MODE_TBI:
upsmr |= UPSMR_TBIM;
break;
- case RTBI:
+ case PHY_INTERFACE_MODE_RTBI:
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
break;
- case RGMII_RXID:
- case RGMII_ID:
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case SGMII:
+ case PHY_INTERFACE_MODE_SGMII:
upsmr |= UPSMR_SGMM;
break;
default:
@@ -518,7 +520,7 @@ static void adjust_link(struct eth_device *dev)
struct uec_mii_info *mii_info = uec->mii_info;
extern void change_phy_interface_mode(struct eth_device *dev,
- enum fsl_phy_enet_if mode, int speed);
+ phy_interface_t mode, int speed);
uec_regs = uec->uec_regs;
if (mii_info->link) {
@@ -536,19 +538,19 @@ static void adjust_link(struct eth_device *dev)
}
if (mii_info->speed != uec->oldspeed) {
- enum fsl_phy_enet_if mode = \
+ phy_interface_t mode =
uec->uec_info->enet_interface_type;
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
switch (mii_info->speed) {
- case 1000:
+ case SPEED_1000:
break;
- case 100:
+ case SPEED_100:
printf ("switching to rgmii 100\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
- case 10:
+ case SPEED_10:
printf ("switching to rgmii 10\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
default:
printf("%s: Ack,Speed(%d)is illegal\n",
@@ -1112,8 +1114,8 @@ static int uec_startup(uec_private_t *uec)
out_be32(&uec_regs->utbipar, utbipar);
/* Configure the TBI for SGMII operation */
- if ((uec->uec_info->enet_interface_type == SGMII) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
+ (uec->uec_info->speed == SPEED_1000)) {
uec_write_phy_reg(uec->dev, uec_regs->utbipar,
ENET_TBI_MII_ANA, TBIANA_SETTINGS);
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 94eb9a26d7..e63bf3a652 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -25,6 +25,7 @@
#include "qe.h"
#include "uccf.h"
+#include <phy.h>
#include <asm/fsl_enet.h>
#define MAX_TX_THREADS 8
@@ -691,7 +692,7 @@ typedef struct uec_info {
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
- enum fsl_phy_enet_if enet_interface_type;
+ phy_interface_t enet_interface_type;
int speed;
} uec_info_t;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index c83ca4b582..e26218be88 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
@@ -456,8 +457,9 @@ static int bcm_init(struct uec_mii_info *mii_info)
gbit_config_aneg(mii_info);
- if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type ==
+ PHY_INTERFACE_MODE_RGMII_RXID) &&
+ (uec->uec_info->speed == SPEED_1000)) {
u16 val;
int cnt = 50;
@@ -485,22 +487,22 @@ static int uec_marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
- enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+ phy_interface_t iface = uec->uec_info->enet_interface_type;
int speed = uec->uec_info->speed;
- if ((speed == 1000) &&
- (iface == RGMII_ID ||
- iface == RGMII_RXID ||
- iface == RGMII_TXID)) {
+ if ((speed == SPEED_1000) &&
+ (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+ iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
int temp;
temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- if (iface == RGMII_ID) {
+ if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
- } else if (iface == RGMII_RXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
- } else if (iface == RGMII_TXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
@@ -853,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
return theInfo;
}
-void marvell_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type,
- int speed
- )
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+ int speed)
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
@@ -868,8 +868,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
}
mii_info = uec->mii_info;
- if (type == RGMII) {
- if (speed == 100) {
+ if (type == PHY_INTERFACE_MODE_RGMII) {
+ if (speed == SPEED_100) {
uec_phy_write(mii_info, 0x00, 0x9140);
uec_phy_write(mii_info, 0x1d, 0x001f);
uec_phy_write(mii_info, 0x1e, 0x200c);
@@ -890,7 +890,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
uec_phy_write(mii_info, 0x00, 0xa100);
uec_phy_write(mii_info, 0x00, 0x2100);
udelay (1000000);
- } else if (speed == 10) {
+ } else if (speed == SPEED_10) {
uec_phy_write(mii_info, 0x14, 0x8e40);
uec_phy_write(mii_info, 0x1b, 0x800b);
uec_phy_write(mii_info, 0x14, 0x0c82);
@@ -908,7 +908,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
}
void change_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type, int speed)
+ phy_interface_t type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
marvell_phy_interface_mode (dev, type, speed);
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 1191eea106..e25d5acc13 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -348,7 +348,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 4
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -360,7 +360,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK3
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index affa3a9cf8..f136a8e16a 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -361,7 +361,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 3
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -373,7 +373,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK8
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a9599405dd..49d64a55eb 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -402,7 +402,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -414,7 +414,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index b0cdc02c1d..a4f42cf22d 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -319,7 +319,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 2
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -331,7 +331,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3674e495c5..6237b23b7e 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -334,7 +334,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -346,7 +346,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
#endif /* CONFIG_QE */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5a7e99ee64..8835ef5c91 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -385,13 +385,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH1 */
@@ -406,13 +406,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH2 */
@@ -427,13 +427,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 2
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH3 */
@@ -448,13 +448,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 3
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH4 */
@@ -468,7 +468,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC6_PHY_ADDR 4
-#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH6 */
@@ -481,7 +481,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC8_PHY_ADDR 6
-#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH8 */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 8fcadfee50..b98e6a1374 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -295,7 +295,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
OpenPOWER on IntegriCloud