Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

63 files changed, 1101 insertions, 349 deletions

diff --git a/Makefile b/Makefile
index 43b57da325..4a630a5562 100644
--- a/Makefile
+++ b/Makefile
@@ -102,10 +102,11 @@ endif # ifneq ($(BUILD_DIR),)
 
 OBJTREE		:= $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 SPLTREE		:= $(OBJTREE)/spl
+TPLTREE		:= $(OBJTREE)/tpl
 SRCTREE		:= $(CURDIR)
 TOPDIR		:= $(SRCTREE)
 LNDIR		:= $(OBJTREE)
-export	TOPDIR SRCTREE OBJTREE SPLTREE
+export	TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
 
 MKCONFIG	:= $(SRCTREE)/mkconfig
 export MKCONFIG
@@ -397,6 +398,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 ifneq ($(CONFIG_SPL_TARGET),)
 ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
@@ -475,13 +477,25 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
+# $@ is output, $(1) and $(2) are inputs, $(3) is padded intermediate,
+# $(4) is pad-to
+SPL_PAD_APPEND = \
+		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(4) -I binary -O binary \
+		$(1) $(obj)$(3); \
+		cat $(obj)$(3) $(2) > $@; \
+		rm $(obj)$(3)
 
+ifdef CONFIG_TPL
+SPL_PAYLOAD := $(obj)tpl/u-boot-with-tpl.bin
+else
+SPL_PAYLOAD := $(obj)u-boot.bin
+endif
 
-$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-			-I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(SPL_PAYLOAD)
+		$(call SPL_PAD_APPEND,$<,$(SPL_PAYLOAD),spl/u-boot-spl-pad.bin,$(CONFIG_SPL_PAD_TO))
+
+$(obj)tpl/u-boot-with-tpl.bin: $(obj)tpl/u-boot-tpl.bin $(obj)u-boot.bin
+		$(call SPL_PAD_APPEND,$<,$(obj)u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO))
 
 $(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
@@ -607,6 +621,9 @@ $(obj)u-boot-nand.bin:	nand_spl $(obj)u-boot.bin
 $(obj)spl/u-boot-spl.bin:	$(SUBDIR_TOOLS) depend
 		$(MAKE) -C spl all
 
+$(obj)tpl/u-boot-tpl.bin:	$(SUBDIR_TOOLS) depend
+		$(MAKE) -C spl all CONFIG_TPL_BUILD=y
+
 updater:
 		$(MAKE) -C tools/updater all
 
@@ -614,6 +631,7 @@ updater:
 # parallel sub-makes creating .depend files simultaneously.
 depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE) \
 		$(obj)include/spl-autoconf.mk \
+		$(obj)include/tpl-autoconf.mk \
 		$(obj)include/autoconf.mk \
 		$(obj)include/generated/generic-asm-offsets.h \
 		$(obj)include/generated/asm-offsets.h
@@ -696,6 +714,15 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
 	mv $@.tmp $@
 
 # Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL)
+$(obj)include/tpl-autoconf.mk: $(obj)include/config.h
+	@$(XECHO) Generating $@ ; \
+	set -e ; \
+	: Extract the config macros ; \
+	$(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD  -DCONFIG_SPL_BUILD\
+			-DDO_DEPS_ONLY -dM include/common.h | \
+	sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+	mv $@.tmp $@
+
 $(obj)include/spl-autoconf.mk: $(obj)include/config.h
 	@$(XECHO) Generating $@ ; \
 	set -e ; \
@@ -706,12 +733,14 @@ $(obj)include/spl-autoconf.mk: $(obj)include/config.h
 
 $(obj)include/generated/generic-asm-offsets.h:	$(obj)include/autoconf.mk.dep \
 	$(obj)include/spl-autoconf.mk \
+	$(obj)include/tpl-autoconf.mk \
 	$(obj)lib/asm-offsets.s
 	@$(XECHO) Generating $@
 	tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
 
 $(obj)lib/asm-offsets.s:	$(obj)include/autoconf.mk.dep \
 	$(obj)include/spl-autoconf.mk \
+	$(obj)include/tpl-autoconf.mk \
 	$(src)lib/asm-offsets.c
 	@mkdir -p $(obj)lib
 	$(CC) -DDO_DEPS_ONLY \
@@ -720,12 +749,14 @@ $(obj)lib/asm-offsets.s:	$(obj)include/autoconf.mk.dep \
 
 $(obj)include/generated/asm-offsets.h:	$(obj)include/autoconf.mk.dep \
 	$(obj)include/spl-autoconf.mk \
+	$(obj)include/tpl-autoconf.mk \
 	$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
 	@$(XECHO) Generating $@
 	tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
 
 $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s:	$(obj)include/autoconf.mk.dep \
-	$(obj)include/spl-autoconf.mk
+	$(obj)include/spl-autoconf.mk \
+	$(obj)include/tpl-autoconf.mk
 	@mkdir -p $(obj)$(CPUDIR)/$(SOC)
 	if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
 		$(CC) -DDO_DEPS_ONLY \
@@ -798,7 +829,8 @@ unconfig:
 	@rm -f $(obj)include/config.h $(obj)include/config.mk \
 		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \
-		$(obj)include/spl-autoconf.mk
+		$(obj)include/spl-autoconf.mk \
+		$(obj)include/tpl-autoconf.mk
 
 %_config::	unconfig
 	@$(MKCONFIG) -A $(@:_config=)
@@ -884,6 +916,8 @@ clobber:	tidy
 	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
 	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
 	@rm -f $(obj)spl/u-boot-spl.lds
+	@rm -f $(obj)tpl/{u-boot-tpl,u-boot-tpl.bin,u-boot-tpl.map}
+	@rm -f $(obj)tpl/u-boot-spl.lds
 	@rm -f $(obj)MLO MLO.byteswap
 	@rm -f $(obj)SPL
 	@rm -f $(obj)tools/xway-swap-bytes
diff --git a/README b/README
index 953ff17900..677c3dc252 100644
--- a/README
+++ b/README
@@ -3090,6 +3090,14 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+		Set for the SPL on PPC mpc8xxx targets, support for
+		arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary.
+
+		CONFIG_SPL_COMMON_INIT_DDR
+		Set for common ddr init with serial presence detect in
+		SPL binary.
+
 		CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT,
 		CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE,
 		CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS,
@@ -3159,6 +3167,17 @@ FIT uImage format:
 		option to re-enable it. This will affect the output of the
 		bootm command when booting a FIT image.
 
+- TPL framework
+		CONFIG_TPL
+		Enable building of TPL globally.
+
+		CONFIG_TPL_PAD_TO
+		Image offset to which the TPL should be padded before appending
+		the TPL payload. By default, this is defined as
+                CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
+                CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
+                payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
+
 Modem Support:
 --------------
 
@@ -4196,6 +4215,11 @@ Low Level (hardware related) configuration options:
 		that is executed before the actual U-Boot. E.g. when
 		compiling a NAND SPL.
 
+- CONFIG_TPL_BUILD
+		Modifies the behaviour of start.S  when compiling a loader
+		that is executed after the SPL and before the actual U-Boot.
+		It is loaded by the SPL.
+
 - CONFIG_SYS_MPC85XX_NO_RESETVEC
 		Only for 85xx systems. If this variable is specified, the section
 		.resetvec is not kept and the section .bootpg is placed in the
diff --git a/arch/powerpc/cpu/mpc824x/cpu.c b/arch/powerpc/cpu/mpc824x/cpu.c
index ee69e495b7..eaa4e87070 100644
--- a/arch/powerpc/cpu/mpc824x/cpu.c
+++ b/arch/powerpc/cpu/mpc824x/cpu.c
@@ -45,12 +45,10 @@ int checkcpu (void)
 		return -1;		/* no valid CPU revision info */
 	}
 
-	printf (" at %s MHz:", strmhz (buf, clock));
+	printf(" at %s MHz: ", strmhz(buf, clock));
 
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
-
-	puts ("\n");
+	print_size(checkicache(), " I-Cache ");
+	print_size(checkdcache(), " D-Cache\n");
 
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 05436f9947..eea264b151 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -245,6 +245,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A006593
 	puts("Work-around for Erratum A006593 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+	if (IS_SVR_REV(svr, 1, 0))
+		puts("Work-around for Erratum A003571 enabled\n");
+#endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A005812
 	puts("Work-around for Erratum A-005812 enabled\n");
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 66bc6a2ea3..1a0196c7c4 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -135,81 +135,82 @@ int checkcpu (void)
 		if (!(i & 3))
 			printf ("\n       ");
 		printf("CPU%d:%-4s MHz, ", core,
-			strmhz(buf1, sysinfo.freqProcessor[core]));
+			strmhz(buf1, sysinfo.freq_processor[core]));
 	}
-	printf("\n       CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("\n       CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
+	printf("\n");
 
 #ifdef CONFIG_FSL_CORENET
 	if (ddr_sync == 1) {
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Synchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 	} else {
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Asynchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 	}
 #else
 	switch (ddr_ratio) {
 	case 0x0:
 		printf("       DDR:%-4s MHz (%s MT/s data rate), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	case 0x7:
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Synchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	default:
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Asynchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	}
 #endif
 
 #if defined(CONFIG_FSL_LBC)
-	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
-		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 	} else {
 		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
-		       sysinfo.freqLocalBus);
+		       sysinfo.freq_localbus);
 	}
 #endif
 
 #if defined(CONFIG_FSL_IFC)
-	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 #endif
 
 #ifdef CONFIG_CPM2
-	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
 #endif
 
 #ifdef CONFIG_QE
-	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
 		printf("       FMAN%d: %s MHz\n", i + 1,
-			strmhz(buf1, sysinfo.freqFMan[i]));
+			strmhz(buf1, sysinfo.freq_fman[i]));
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
-	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
 #endif
 
-	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");
+	puts("L1:    D-cache 32 KiB enabled\n       I-cache 32 KiB enabled\n");
 
 #ifdef CONFIG_FSL_CORENET
 	/* Display the RCW, so that no one gets confused as to what RCW
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 2d65157c7f..6036333eaa 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -167,7 +167,8 @@ static void enable_cpc(void)
 
 	}
 
-	printf("Corenet Platform Cache: %d KB enabled\n", size);
+	puts("Corenet Platform Cache: ");
+	print_size(size * 1024, " enabled\n");
 }
 
 static void invalidate_cpc(void)
@@ -356,7 +357,9 @@ int cpu_init_r(void)
 	extern int spin_table_compat;
 	const char *spin;
 #endif
-
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+	ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+#endif
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
 	/*
@@ -457,28 +460,28 @@ int cpu_init_r(void)
 	case 0x1:
 		if (ver == SVR_8540 || ver == SVR_8560   ||
 		    ver == SVR_8541 || ver == SVR_8555) {
-			puts("128 KB ");
-			/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+			puts("128 KiB ");
+			/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
 			cache_ctl = 0xc4000000;
 		} else {
-			puts("256 KB ");
+			puts("256 KiB ");
 			cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
 		}
 		break;
 	case 0x2:
 		if (ver == SVR_8540 || ver == SVR_8560   ||
 		    ver == SVR_8541 || ver == SVR_8555) {
-			puts("256 KB ");
-			/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+			puts("256 KiB ");
+			/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
 			cache_ctl = 0xc8000000;
 		} else {
-			puts ("512 KB ");
+			puts("512 KiB ");
 			/* set L2E=1, L2I=1, & L2SRAM=0 */
 			cache_ctl = 0xc0000000;
 		}
 		break;
 	case 0x3:
-		puts("1024 KB ");
+		puts("1024 KiB ");
 		/* set L2E=1, L2I=1, & L2SRAM=0 */
 		cache_ctl = 0xc0000000;
 		break;
@@ -526,13 +529,14 @@ int cpu_init_r(void)
 	if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
 		while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
 			;
-		printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
+		print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
 	}
 
 skip_l2:
 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	if (l2cache->l2csr0 & L2CSR0_L2E)
-		printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+		print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
+			   " enabled\n");
 
 	enable_cluster_l2();
 #else
@@ -546,6 +550,12 @@ skip_l2:
 	fsl_serdes_init();
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+#define MCFGR_AXIPIPE 0x000000f0
+	if (IS_SVR_REV(svr, 1, 0))
+		clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE);
+#endif
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_A005871
 	if (IS_SVR_REV(svr, 1, 0)) {
 		int i;
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 84bb8fab8f..533d47ab43 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob)
 	get_sys_info(&sysinfo);
 #ifdef CONFIG_SYS_DPAA_FMAN
 	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
-			sysinfo.freqFMan[0]);
+			sysinfo.freq_fman[0]);
 
 #if (CONFIG_SYS_NUM_FMAN == 2)
 	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
-			sysinfo.freqFMan[1]);
+			sysinfo.freq_fman[1]);
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	do_fixup_by_compat_u32(blob, "fsl,qman",
-			"clock-frequency", sysinfo.freqQMAN, 1);
+			"clock-frequency", sysinfo.freq_qman, 1);
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
 	do_fixup_by_compat_u32(blob, "fsl,pme",
-		"clock-frequency", sysinfo.freqPME, 1);
+		"clock-frequency", sysinfo.freq_pme, 1);
 #endif
 }
 #else
@@ -476,7 +476,7 @@ void fdt_fixup_fman_firmware(void *blob)
 	if (!p)
 		return;
 
-	fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0);
+	fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16);
 	if (!fmanfw)
 		return;
 
@@ -616,7 +616,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 	while (off != -FDT_ERR_NOTFOUND) {
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-		val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+		val = cpu_to_fdt32(sysinfo.freq_processor[*reg]);
 		fdt_setprop(blob, off, "clock-frequency", &val, 4);
 		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 							"cpu", 4);
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index f093960fe7..07690f97b1 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 /* --------------------------------------------------------------- */
 
-void get_sys_info (sys_info_t * sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #ifdef CONFIG_FSL_IFC
@@ -46,7 +46,7 @@ void get_sys_info (sys_info_t * sysInfo)
 		[14] = 3,	/* CC4 PPL / 4 */
 	};
 
-	const u8 core_cplx_PLL_div[16] = {
+	const u8 core_cplx_pll_div[16] = {
 		[ 0] = 1,	/* CC1 PPL / 1 */
 		[ 1] = 2,	/* CC1 PPL / 2 */
 		[ 2] = 4,	/* CC1 PPL / 4 */
@@ -60,26 +60,26 @@ void get_sys_info (sys_info_t * sysInfo)
 		[13] = 2,	/* CC4 PPL / 2 */
 		[14] = 4,	/* CC4 PPL / 4 */
 	};
-	uint i, freqCC_PLL[6], rcw_tmp;
+	uint i, freq_cc_pll[6], rcw_tmp;
 	uint ratio[6];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;
 
-	sysInfo->freqSystemBus = sysclk;
+	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_DDR_CLK_FREQ
-	sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
 #else
-	sysInfo->freqDDRBus = sysclk;
+	sys_info->freq_ddrbus = sysclk;
 #endif
 
-	sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
+	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
 	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
 			FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
 			& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 	if (mem_pll_rat > 2)
-		sysInfo->freqDDRBus *= mem_pll_rat;
+		sys_info->freq_ddrbus *= mem_pll_rat;
 	else
-		sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat;
+		sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat;
 
 	ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
 	ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
@@ -89,9 +89,9 @@ void get_sys_info (sys_info_t * sysInfo)
 	ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
 	for (i = 0; i < 6; i++) {
 		if (ratio[i] > 4)
-			freqCC_PLL[i] = sysclk * ratio[i];
+			freq_cc_pll[i] = sysclk * ratio[i];
 		else
-			freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
+			freq_cc_pll[i] = sys_info->freq_systembus * ratio[i];
 	}
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 	/*
@@ -110,8 +110,8 @@ void get_sys_info (sys_info_t * sysInfo)
 			printf("Unsupported architecture configuration"
 				" in function %s\n", __func__);
 		cplx_pll += (cluster / 2) * 3;
-		sysInfo->freqProcessor[cpu] =
-			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+		sys_info->freq_processor[cpu] =
+			 freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 #ifdef CONFIG_PPC_B4860
 #define FM1_CLK_SEL	0xe0000000
@@ -127,63 +127,63 @@ void get_sys_info (sys_info_t * sysInfo)
 #ifdef CONFIG_SYS_DPAA_PME
 	switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
 	case 1:
-		sysInfo->freqPME = freqCC_PLL[0];
+		sys_info->freq_pme = freq_cc_pll[0];
 		break;
 	case 2:
-		sysInfo->freqPME = freqCC_PLL[0] / 2;
+		sys_info->freq_pme = freq_cc_pll[0] / 2;
 		break;
 	case 3:
-		sysInfo->freqPME = freqCC_PLL[0] / 3;
+		sys_info->freq_pme = freq_cc_pll[0] / 3;
 		break;
 	case 4:
-		sysInfo->freqPME = freqCC_PLL[0] / 4;
+		sys_info->freq_pme = freq_cc_pll[0] / 4;
 		break;
 	case 6:
-		sysInfo->freqPME = freqCC_PLL[1] / 2;
+		sys_info->freq_pme = freq_cc_pll[1] / 2;
 		break;
 	case 7:
-		sysInfo->freqPME = freqCC_PLL[1] / 3;
+		sys_info->freq_pme = freq_cc_pll[1] / 3;
 		break;
 	default:
 		printf("Error: Unknown PME clock select!\n");
 	case 0:
-		sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+		sys_info->freq_pme = sys_info->freq_systembus / 2;
 		break;
 
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+	sys_info->freq_qman = sys_info->freq_systembus / 2;
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
 	case 1:
-		sysInfo->freqFMan[0] = freqCC_PLL[3];
+		sys_info->freq_fman[0] = freq_cc_pll[3];
 		break;
 	case 2:
-		sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+		sys_info->freq_fman[0] = freq_cc_pll[3] / 2;
 		break;
 	case 3:
-		sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+		sys_info->freq_fman[0] = freq_cc_pll[3] / 3;
 		break;
 	case 4:
-		sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+		sys_info->freq_fman[0] = freq_cc_pll[3] / 4;
 		break;
 	case 5:
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+		sys_info->freq_fman[0] = sys_info->freq_systembus;
 		break;
 	case 6:
-		sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+		sys_info->freq_fman[0] = freq_cc_pll[4] / 2;
 		break;
 	case 7:
-		sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+		sys_info->freq_fman[0] = freq_cc_pll[4] / 3;
 		break;
 	default:
 		printf("Error: Unknown FMan1 clock select!\n");
 	case 0:
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
 		break;
 	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
@@ -192,27 +192,27 @@ void get_sys_info (sys_info_t * sysInfo)
 	rcw_tmp = in_be32(&gur->rcwsr[15]);
 	switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
 	case 1:
-		sysInfo->freqFMan[1] = freqCC_PLL[4];
+		sys_info->freq_fman[1] = freq_cc_pll[4];
 		break;
 	case 2:
-		sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+		sys_info->freq_fman[1] = freq_cc_pll[4] / 2;
 		break;
 	case 3:
-		sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+		sys_info->freq_fman[1] = freq_cc_pll[4] / 3;
 		break;
 	case 4:
-		sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+		sys_info->freq_fman[1] = freq_cc_pll[4] / 4;
 		break;
 	case 6:
-		sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+		sys_info->freq_fman[1] = freq_cc_pll[3] / 2;
 		break;
 	case 7:
-		sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+		sys_info->freq_fman[1] = freq_cc_pll[3] / 3;
 		break;
 	default:
 		printf("Error: Unknown FMan2 clock select!\n");
 	case 0:
-		sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
 		break;
 	}
 #endif	/* CONFIG_SYS_NUM_FMAN == 2 */
@@ -225,8 +225,8 @@ void get_sys_info (sys_info_t * sysInfo)
 				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
 
-		sysInfo->freqProcessor[cpu] =
-			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+		sys_info->freq_processor[cpu] =
+			 freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 #define PME_CLK_SEL	0x80000000
 #define FM1_CLK_SEL	0x40000000
@@ -246,43 +246,43 @@ void get_sys_info (sys_info_t * sysInfo)
 #ifdef CONFIG_SYS_DPAA_PME
 	if (rcw_tmp & PME_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
-			sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4;
+			sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 4;
 		else
-			sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2;
+			sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 2;
 	} else {
-		sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+		sys_info->freq_pme = sys_info->freq_systembus / 2;
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	if (rcw_tmp & FM1_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
-			sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4;
+			sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 4;
 		else
-			sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2;
+			sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 2;
 	} else {
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
 	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
 	if (rcw_tmp & FM2_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
-			sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4;
+			sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 4;
 		else
-			sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2;
+			sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 2;
 	} else {
-		sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
 	}
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+	sys_info->freq_qman = sys_info->freq_systembus / 2;
 #endif
 
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 #else /* CONFIG_FSL_CORENET */
-	uint plat_ratio, e500_ratio, half_freqSystemBus;
+	uint plat_ratio, e500_ratio, half_freq_systembus;
 	int i;
 #ifdef CONFIG_QE
 	__maybe_unused u32 qe_ratio;
@@ -290,40 +290,40 @@ void get_sys_info (sys_info_t * sysInfo)
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
-	sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+	sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
 
 	/* Divide before multiply to avoid integer
 	 * overflow for processor speeds above 2GHz */
-	half_freqSystemBus = sysInfo->freqSystemBus/2;
+	half_freq_systembus = sys_info->freq_systembus/2;
 	for (i = 0; i < cpu_numcores(); i++) {
 		e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
-		sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+		sys_info->freq_processor[i] = e500_ratio * half_freq_systembus;
 	}
 
-	/* Note: freqDDRBus is the MCLK frequency, not the data rate. */
-	sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+	/* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
+	sys_info->freq_ddrbus = sys_info->freq_systembus;
 
 #ifdef CONFIG_DDR_CLK_FREQ
 	{
 		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
 			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
-			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+			sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
 #endif
 
 #ifdef CONFIG_QE
 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
-	sysInfo->freqQE =  sysInfo->freqSystemBus;
+	sys_info->freq_qe =  sys_info->freq_systembus;
 #else
 	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
 			>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
-	sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
+	sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+		sys_info->freq_fman[0] = sys_info->freq_systembus;
 #endif
 
 #endif /* CONFIG_FSL_CORENET */
@@ -350,10 +350,10 @@ void get_sys_info (sys_info_t * sysInfo)
 		 */
 		lcrr_div *= 2;
 #endif
-		sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
+		sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
 	} else {
 		/* In case anyone cares what the unknown value is */
-		sysInfo->freqLocalBus = lcrr_div;
+		sys_info->freq_localbus = lcrr_div;
 	}
 #endif
 
@@ -361,7 +361,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	ccr = in_be32(&ifc_regs->ifc_ccr);
 	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
 
-	sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
 #endif
 }
 
@@ -382,13 +382,13 @@ int get_clocks (void)
 	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
 #endif
 	get_sys_info (&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor[0];
-	gd->bus_clk = sys_info.freqSystemBus;
-	gd->mem_clk = sys_info.freqDDRBus;
-	gd->arch.lbc_clk = sys_info.freqLocalBus;
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->mem_clk = sys_info.freq_ddrbus;
+	gd->arch.lbc_clk = sys_info.freq_localbus;
 
 #ifdef CONFIG_QE
-	gd->arch.qe_clk = sys_info.freqQE;
+	gd->arch.qe_clk = sys_info.freq_qe;
 	gd->arch.brg_clk = gd->arch.qe_clk / 2;
 #endif
 	/*
@@ -400,7 +400,7 @@ int get_clocks (void)
 	 */
 #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
 	defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
-	gd->arch.i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #elif defined(CONFIG_MPC8544)
 	/*
 	 * On the 8544, the I2C clock is the same as the SEC clock.  This can be
@@ -410,12 +410,12 @@ int get_clocks (void)
 	 * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
 	 */
 	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
-		gd->arch.i2c1_clk = sys_info.freqSystemBus / 3;
+		gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
 	else
-		gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+		gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #else
 	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
-	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #endif
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
@@ -429,7 +429,7 @@ int get_clocks (void)
 #endif /* defined(CONFIG_FSL_ESDHC) */
 
 #if defined(CONFIG_CPM2)
-	gd->arch.vco_out = 2*sys_info.freqSystemBus;
+	gd->arch.vco_out = 2*sys_info.freq_systembus;
 	gd->arch.cpm_clk = gd->arch.vco_out / 2;
 	gd->arch.scc_clk = gd->arch.vco_out / 4;
 	gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index ed88602c31..ff55e3c357 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -106,25 +106,25 @@ static const struct serdes_config serdes2_cfg_tbl[] = {
 		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
 		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
 	{38, {NONE, NONE, QSGMII_FM2_B, NONE,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
 		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
 		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
 		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
 		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
 		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
 		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		NONE, NONE, QSGMII_FM1_A, NONE}},
+		NONE, NONE, QSGMII_FM2_A, NONE} },
 	{56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
 		XFI_FM2_MAC10, XFI_FM2_MAC9,
 		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index da3c345d6f..8748ecd144 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -39,7 +39,8 @@ void init_tlbs(void)
 	return ;
 }
 
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_NAND_SPL) && \
+	(!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL))
 void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 		       phys_addr_t *rpn)
 {
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index 08188d75e5..85ec74ba94 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -44,6 +44,11 @@ SECTIONS
 	}
 	_edata  =  .;
 
+	. = .;
+	__start___ex_table = .;
+	__ex_table : { *(__ex_table) }
+	__stop___ex_table = .;
+
 	. = ALIGN(8);
 	__init_begin = .;
 	__init_end = .;
diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c
index d6b28dd077..30518544dd 100644
--- a/arch/powerpc/cpu/mpc86xx/cpu.c
+++ b/arch/powerpc/cpu/mpc86xx/cpu.c
@@ -72,21 +72,21 @@ checkcpu(void)
 	get_sys_info(&sysinfo);
 
 	puts("Clock Configuration:\n");
-	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
-	printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freq_processor));
+	printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
 	printf("       DDR:%-4s MHz (%s MT/s data rate), ",
-		strmhz(buf1, sysinfo.freqSystemBus / 2),
-		strmhz(buf2, sysinfo.freqSystemBus));
+		strmhz(buf1, sysinfo.freq_systembus / 2),
+		strmhz(buf2, sysinfo.freq_systembus));
 
-	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
-		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 	} else {
 		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
-		       sysinfo.freqLocalBus);
+		       sysinfo.freq_localbus);
 	}
 
-	puts("L1:    D-cache 32 KB enabled\n");
-	puts("       I-cache 32 KB enabled\n");
+	puts("L1:    D-cache 32 KiB enabled\n");
+	puts("       I-cache 32 KiB enabled\n");
 
 	puts("L2:    ");
 	if (get_l2cr() & 0x80000000) {
@@ -95,7 +95,7 @@ checkcpu(void)
 #elif defined(CONFIG_MPC8641)
 		puts("512");
 #endif
-		puts(" KB enabled\n");
+		puts(" KiB enabled\n");
 	} else {
 		puts("Disabled\n");
 	}
@@ -131,7 +131,7 @@ get_tbclk(void)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	return (sys_info.freqSystemBus + 3L) / 4L;
+	return (sys_info.freq_systembus + 3L) / 4L;
 }
 
 
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c
index ea366ab9e4..854d02b5c4 100644
--- a/arch/powerpc/cpu/mpc86xx/speed.c
+++ b/arch/powerpc/cpu/mpc86xx/speed.c
@@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* used in some defintiions of CONFIG_SYS_CLK_FREQ */
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 
-void get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -31,7 +31,7 @@ void get_sys_info(sys_info_t *sysInfo)
 
 	switch (plat_ratio) {
 	case 0x0:
-		sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
+		sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ;
 		break;
 	case 0x02:
 	case 0x03:
@@ -43,10 +43,10 @@ void get_sys_info(sys_info_t *sysInfo)
 	case 0x0a:
 	case 0x0c:
 	case 0x10:
-		sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+		sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
 		break;
 	default:
-		sysInfo->freqSystemBus = 0;
+		sys_info->freq_systembus = 0;
 		break;
 	}
 
@@ -55,25 +55,26 @@ void get_sys_info(sys_info_t *sysInfo)
 
 	switch (e600_ratio) {
 	case 0x10:
-		sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 2 * sys_info->freq_systembus;
 		break;
 	case 0x19:
-		sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 5 * sys_info->freq_systembus / 2;
 		break;
 	case 0x20:
-		sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 3 * sys_info->freq_systembus;
 		break;
 	case 0x39:
-		sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 7 * sys_info->freq_systembus / 2;
 		break;
 	case 0x28:
-		sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 4 * sys_info->freq_systembus;
 		break;
 	case 0x1d:
-		sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 9 * sys_info->freq_systembus / 2;
 		break;
 	default:
-		sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
+		sys_info->freq_processor = e600_ratio +
+						sys_info->freq_systembus;
 		break;
 	}
 
@@ -84,10 +85,11 @@ void get_sys_info(sys_info_t *sysInfo)
 	lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
+		sys_info->freq_localbus = sys_info->freq_systembus
+							/ (lcrr_div * 2);
 	} else {
 		/* In case anyone cares what the unknown value is */
-		sysInfo->freqLocalBus = lcrr_div;
+		sys_info->freq_localbus = lcrr_div;
 	}
 }
 
@@ -102,9 +104,9 @@ int get_clocks(void)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor;
-	gd->bus_clk = sys_info.freqSystemBus;
-	gd->arch.lbc_clk = sys_info.freqLocalBus;
+	gd->cpu_clk = sys_info.freq_processor;
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->arch.lbc_clk = sys_info.freq_localbus;
 
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
@@ -114,9 +116,9 @@ int get_clocks(void)
 	 * AN2919.
 	 */
 #ifdef CONFIG_MPC8610
-	gd->arch.i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #else
-	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #endif
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
@@ -138,7 +140,7 @@ ulong get_bus_freq(ulong dummy)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	val = sys_info.freqSystemBus;
+	val = sys_info.freq_systembus;
 
 	return val;
 }
diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c
index 1550045e6c..5c96b5fe16 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu.c
@@ -136,10 +136,8 @@ static int check_CPU (long clock, uint pvr, uint immr)
 #else
 	printf (" at %s MHz: ", strmhz (buf, clock));
 #endif
-	printf ("%u kB I-Cache %u kB D-Cache",
-		checkicache () >> 10,
-		checkdcache () >> 10
-	);
+	print_size(checkicache(), " I-Cache ");
+	print_size(checkdcache(), " D-Cache");
 
 	/* do we have a FEC (860T/P or 852/859/866/885)? */
 
@@ -204,10 +202,10 @@ static int check_CPU (long clock, uint pvr, uint immr)
 		printf ("unknown MPC857 (0x%08x)", k);
 #endif
 
-	printf (" at %s MHz:", strmhz (buf, clock));
+	printf(" at %s MHz: ", strmhz(buf, clock));
 
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
+	print_size(checkicache(), " I-Cache ");
+	print_size(checkdcache(), " D-Cache");
 
 	/* lets check and see if we're running on a 862T (or P?) */
 
@@ -265,10 +263,10 @@ static int check_CPU (long clock, uint pvr, uint immr)
 	if (suf)
 		printf ("PPC823ZTnn%s", suf);
 
-	printf (" at %s MHz:", strmhz (buf, clock));
+	printf(" at %s MHz: ", strmhz(buf, clock));
 
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
+	print_size(checkicache(), " I-Cache ");
+	print_size(checkdcache(), " D-Cache");
 
 	/* lets check and see if we're running on a 860T (or P?) */
 
@@ -321,10 +319,10 @@ static int check_CPU (long clock, uint pvr, uint immr)
 	default:
 		printf ("unknown MPC850 (0x%08x)", k);
 	}
-	printf (" at %s MHz:", strmhz (buf, clock));
+	printf(" at %s MHz: ", strmhz(buf, clock));
 
-	printf (" %u kB I-Cache", checkicache () >> 10);
-	printf (" %u kB D-Cache", checkdcache () >> 10);
+	print_size(checkicache(), " I-Cache ");
+	print_size(checkdcache(), " D-Cache");
 
 	/* lets check and see if we're running on a 850T (or P?) */
 
diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c
index 02a0467896..fc351585be 100644
--- a/arch/powerpc/cpu/mpc8xx/video.c
+++ b/arch/powerpc/cpu/mpc8xx/video.c
@@ -1176,7 +1176,7 @@ static void *video_logo (void)
 #ifndef CONFIG_FADS		/* all normal boards */
 	/* leave one blank line */
 
-	sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
+	sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash",
 		strmhz(temp, gd->cpu_clk),
 		gd->ram_size >> 20,
 		gd->bd->bi_flashsize >> 20 );
@@ -1187,7 +1187,7 @@ static void *video_logo (void)
 	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
 					  info);
 
-	sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM");
+	sprintf(info, "2MiB FLASH - 8MiB DRAM - 4MiB SRAM");
 	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
 					  info);
 #endif
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index e958e138dd..56128a7b96 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -218,12 +218,16 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 		if (dimm_params[i].n_ranks) {
 			if (dimm_params[i].registered_dimm) {
 				temp1 = 1;
+#ifndef CONFIG_SPL_BUILD
 				printf("Detected RDIMM %s\n",
 					dimm_params[i].mpart);
+#endif
 			} else {
 				temp2 = 1;
+#ifndef CONFIG_SPL_BUILD
 				printf("Detected UDIMM %s\n",
 					dimm_params[i].mpart);
+#endif
 			}
 		}
 	}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 9f4f25343b..842bf1989e 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -683,7 +683,8 @@ phys_size_t fsl_ddr_sdram(void)
 #if !defined(CONFIG_PHYS_64BIT)
 	/* Check for 4G or more.  Bad. */
 	if (total_memory >= (1ull << 32)) {
-		printf("Detected %lld MB of memory\n", total_memory >> 20);
+		puts("Detected ");
+		print_size(total_memory, " of memory\n");
 		printf("       This U-Boot only supports < 4G of DDR\n");
 		printf("       You could rebuild it with CONFIG_PHYS_64BIT\n");
 		printf("       "); /* re-align to match init_func_ram print */
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index 89a561e0ac..a401083107 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -76,7 +76,8 @@ void disable_law(u8 idx)
 	return;
 }
 
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_NAND_SPL) && \
+	(!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL))
 static int get_law_entry(u8 i, struct law_entry *e)
 {
 	u32 lawar;
@@ -106,7 +107,8 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 	return idx;
 }
 
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_NAND_SPL) && \
+	(!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL))
 int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
 	u32 idx;
diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c
index 5cebafdbae..d1fc7f3fc2 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu.c
@@ -631,12 +631,12 @@ int checkcpu (void)
 #endif
 
 #if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
-	printf ("       16 kB I-Cache 16 kB D-Cache");
+	printf("       16 KiB I-Cache 16 KiB D-Cache");
 #elif defined(CONFIG_440)
-	printf ("       32 kB I-Cache 32 kB D-Cache");
+	printf("       32 KiB I-Cache 32 KiB D-Cache");
 #else
-	printf ("       16 kB I-Cache %d kB D-Cache",
-		((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
+	printf("       16 KiB I-Cache %d KiB D-Cache",
+	       ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
 #endif
 
 #endif /* !defined(CONFIG_405) */
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index cf1bb02797..15e44de41e 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -133,6 +133,7 @@
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
 #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+#define CONFIG_SYS_FSL_ERRATUM_SEC_A003571
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
 #define CONFIG_SYS_FSL_A004447_SVR_REV	0x10
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
index 6e64745b0f..db0cf28fff 100644
--- a/board/freescale/b4860qds/b4860qds_crossbar_con.h
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -13,10 +13,10 @@
 static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10},
 				{5, 11}, {4, 5}, {2, 6}, {12, 9} };
 
-static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0},
+static int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0},
 				{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
 
-static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1},
+static int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1},
 				{7, 8}, {9, 0}, {2, 14}, {12, 15},
 				{-1, -1}, {-1, -1} };
 
@@ -25,7 +25,7 @@ static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1},
 				{-1, -1}, {-1, -1} };
 
 #ifdef CONFIG_PPC_B4420
-static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
+static int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
 		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
 #endif
 
@@ -35,10 +35,10 @@ static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1},
 static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9},
 				{11, 11}, {5, 10}, {6, 3}, {9, 12} };
 
-static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9},
+static int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9},
 				{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
 
-static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1},
+static int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1},
 				{7, 8}, {1, 9}, {14, 3}, {15, 12},
 				{-1, -1}, {-1, -1} };
 
@@ -47,7 +47,7 @@ static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1},
 				{-1, -1}, {-1, -1} };
 
 #ifdef CONFIG_PPC_B4420
-static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
+static int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
 		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
 #endif
 
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 457d1adbdc..f9550c48ce 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -45,9 +45,7 @@ COBJS-$(CONFIG_MPC8555CDS)	+= cds_pci_ft.o
 
 COBJS-$(CONFIG_MPC8536DS)	+= ics307_clk.o
 COBJS-$(CONFIG_MPC8572DS)	+= ics307_clk.o
-ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_P1022DS)		+= ics307_clk.o
-endif
 COBJS-$(CONFIG_P2020DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P3041DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P4080DS)		+= ics307_clk.o
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
index 8a3dc33b66..97a25e838e 100644
--- a/board/freescale/common/vsc3316_3308.c
+++ b/board/freescale/common/vsc3316_3308.c
@@ -31,7 +31,7 @@ int vsc_if_enable(unsigned int vsc_addr)
 	return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
 }
 
-int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
 		unsigned int num_con)
 {
 	unsigned int i;
diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h
index 4003fcdb23..2a49187779 100644
--- a/board/freescale/common/vsc3316_3308.h
+++ b/board/freescale/common/vsc3316_3308.h
@@ -12,7 +12,7 @@
 #include <errno.h>
 
 int vsc_if_enable(unsigned int vsc_addr);
-int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
 		unsigned int num_con);
 int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
 		unsigned int num_con);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 7a84cd295a..2fb4037428 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -68,7 +68,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 3d2dabd116..1e21a664c1 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -250,7 +250,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index d4e7abebd4..ee9269504c 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -248,7 +248,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index a45a5583c9..162636ef8c 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -273,7 +273,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c
index 73289f3656..d0e712eb30 100644
--- a/board/freescale/p1010rdb/spl_minimal.c
+++ b/board/freescale/p1010rdb/spl_minimal.c
@@ -26,7 +26,7 @@ void sdram_init(void)
 
 	ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
 	ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
+	ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000;
 
 	/* mask off E bit */
 	u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile
index cfc05f7124..3bc4f4325f 100644
--- a/board/freescale/p1022ds/Makefile
+++ b/board/freescale/p1022ds/Makefile
@@ -21,6 +21,9 @@ ifdef MINIMAL
 COBJS-y        += spl_minimal.o tlb.o law.o
 
 else
+ifdef CONFIG_SPL_BUILD
+COBJS-y += spl.o
+endif
 COBJS-y	+= $(BOARD).o
 COBJS-y	+= ddr.o
 COBJS-y	+= law.o
diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c
new file mode 100644
index 0000000000..b9dbf81b3f
--- /dev/null
+++ b/board/freescale/p1022ds/spl.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <nand.h>
+#include <i2c.h>
+#include "../common/ngpixis.h"
+#include <fsl_esdhc.h>
+#include <spi_flash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const u32 sysclk_tbl[] = {
+	66666000, 7499900, 83332500, 8999900,
+	99999000, 11111000, 12499800, 13333200
+};
+
+ulong get_effective_memsize(void)
+{
+	return CONFIG_SYS_L2_SIZE;
+}
+
+void board_init_f(ulong bootflag)
+{
+	int px_spd;
+	u32 plat_ratio, sys_clk, bus_clk;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+	console_init_f();
+
+	/* Set pmuxcr to allow both i2c1 and i2c2 */
+	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
+	setbits_be32(&gur->pmuxcr,
+		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+
+#ifdef CONFIG_SPL_SPI_BOOT
+	/* Enable the SPI */
+	clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
+#endif
+
+	/* Read back the register to synchronize the write. */
+	in_be32(&gur->pmuxcr);
+
+	/* initialize selected port with appropriate baud rate */
+	px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD));
+	sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK];
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	bus_clk = sys_clk * plat_ratio / 2;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     bus_clk / 16 / CONFIG_BAUDRATE);
+#ifdef CONFIG_SPL_MMC_BOOT
+	puts("\nSD boot...\n");
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	puts("\nSPI Flash boot...\n");
+#endif
+
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+	bd_t *bd;
+
+	memset(gd, 0, sizeof(gd_t));
+	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+	memset(bd, 0, sizeof(bd_t));
+	gd->bd = bd;
+	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+
+	probecpu();
+	get_clocks();
+	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+			CONFIG_SPL_RELOC_MALLOC_SIZE);
+#ifndef CONFIG_SPL_NAND_BOOT
+	env_init();
+#endif
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_initialize(bd);
+#endif
+	/* relocate environment function pointers etc. */
+#ifdef CONFIG_SPL_NAND_BOOT
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (uchar *)CONFIG_ENV_ADDR);
+
+	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
+	gd->env_valid = 1;
+#else
+	env_relocate();
+#endif
+
+	i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+	gd->ram_size = initdram(0);
+#ifdef CONFIG_SPL_NAND_BOOT
+	puts("Tertiary program loader running in sram...");
+#else
+	puts("Second program loader running in sram...\n");
+#endif
+
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_boot();
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+	nand_boot();
+#endif
+}
diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c
index d150d95a2f..8b34396843 100644
--- a/board/freescale/p1022ds/spl_minimal.c
+++ b/board/freescale/p1022ds/spl_minimal.c
@@ -12,51 +12,6 @@
 #include <asm/fsl_ddr_sdram.h>
 
 
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-void sdram_init(void)
-{
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
-	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
-#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
-	__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
-#endif
-	__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
-
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
-	__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
-
-	__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
-	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
-	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
-
-	/* Set, but do not enable the memory */
-	__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN,
-			&ddr->sdram_cfg);
-
-	in_be32(&ddr->sdram_cfg);
-	udelay(500);
-
-	/* Let the controller go */
-	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
-	in_be32(&ddr->sdram_cfg);
-
-	set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
-}
-
 const static u32 sysclk_tbl[] = {
 	66666000, 7499900, 83332500, 8999900,
 	99999000, 11111000, 12499800, 13333200
@@ -68,6 +23,10 @@ void board_init_f(ulong bootflag)
 	u32 plat_ratio, sys_clk, bus_clk;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+#endif
 	/* for FPGA */
 	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
@@ -83,9 +42,6 @@ void board_init_f(ulong bootflag)
 
 	puts("\nNAND boot... ");
 
-	/* Initialize the DDR3 */
-	sdram_init();
-
 	/* copy code to RAM and jump to it - this should not return */
 	/* NOTE - code has to be copied out of NAND buffer before
 	 * other blocks can be read.
@@ -96,6 +52,7 @@ void board_init_f(ulong bootflag)
 
 void board_init_r(gd_t *gd, ulong dest_addr)
 {
+	puts("\nSecond program loader running in sram...");
 	nand_boot();
 }
 
diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
index 2eef6adbfa..e7ae2e25b2 100644
--- a/board/freescale/p1022ds/tlb.c
+++ b/board/freescale/p1022ds/tlb.c
@@ -71,25 +71,32 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_4K, 1),
 
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+#if defined(CONFIG_SYS_RAMBOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
 	/* **** - eSDHC/eSPI/NAND boot */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 8, BOOKE_PAGESZ_1G, 1),
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 8, BOOKE_PAGESZ_1G, 1),
 	/* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-			CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 9, BOOKE_PAGESZ_1G, 1),
+		      CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_1G, 1),
 #endif
 
 #ifdef CONFIG_SYS_NAND_BASE
 	/* *I*G - NAND */
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 10, BOOKE_PAGESZ_16K, 1),
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_16K, 1),
 #endif
 
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	/* *I*G - L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		      0, 11, BOOKE_PAGESZ_256K, 1)
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 5c51845ddf..c0b72e035e 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -247,7 +247,7 @@ phys_size_t fixed_sdram(void)
 
 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
-			strmhz(buf, sysinfo.freqDDRBus));
+			strmhz(buf, sysinfo.freq_ddrbus));
 
 	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 
diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c
index 697c0dd370..67f69d79bd 100644
--- a/board/freescale/p1_twr/ddr.c
+++ b/board/freescale/p1_twr/ddr.c
@@ -53,7 +53,7 @@ phys_size_t fixed_sdram(void)
 
 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
-			strmhz(buf, sysinfo.freqDDRBus));
+			strmhz(buf, sysinfo.freq_ddrbus));
 
 	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index c771e17952..b5f488bcba 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -172,7 +172,10 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval)
 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
 				enum fm_port port, int offset)
 {
-	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+	int interface = fm_info_get_enet_if(port);
+
+	if (interface == PHY_INTERFACE_MODE_SGMII ||
+	    interface == PHY_INTERFACE_MODE_QSGMII) {
 		switch (port) {
 		case FM1_DTSEC1:
 			if (qsgmiiphy_fix[port])
@@ -272,6 +275,7 @@ void fdt_fixup_board_enet(void *fdt)
 	for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_SGMII:
+		case PHY_INTERFACE_MODE_QSGMII:
 			switch (mdio_mux[i]) {
 			case EMI1_SLOT1:
 				fdt_status_okay_by_alias(fdt, "emi1_slot1");
@@ -393,7 +397,7 @@ static void initialize_qsgmiiphy_fix(void)
 int board_eth_init(bd_t *bis)
 {
 #if defined(CONFIG_FMAN_ENET)
-	int i, idx, lane, slot;
+	int i, idx, lane, slot, interface;
 	struct memac_mdio_info dtsec_mdio_info;
 	struct memac_mdio_info tgec_mdio_info;
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -470,9 +474,9 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
 		if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
 			fm_info_set_phy_address(FM1_DTSEC9,
-						slot_qsgmii_phyaddr[1][3]);
-			fm_info_set_phy_address(FM1_DTSEC10,
 						slot_qsgmii_phyaddr[1][2]);
+			fm_info_set_phy_address(FM1_DTSEC10,
+						slot_qsgmii_phyaddr[1][3]);
 		}
 		break;
 	case 40:
@@ -482,9 +486,9 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
 		if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
 			fm_info_set_phy_address(FM1_DTSEC10,
-						slot_qsgmii_phyaddr[1][3]);
-			fm_info_set_phy_address(FM1_DTSEC9,
 						slot_qsgmii_phyaddr[1][2]);
+			fm_info_set_phy_address(FM1_DTSEC9,
+						slot_qsgmii_phyaddr[1][3]);
 		}
 		fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
 		fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
@@ -498,15 +502,31 @@ int board_eth_init(bd_t *bis)
 
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		idx = i - FM1_DTSEC1;
-		switch (fm_info_get_enet_if(i)) {
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
 		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(FSL_SRDS_1,
+		case PHY_INTERFACE_MODE_QSGMII:
+			if (interface == PHY_INTERFACE_MODE_QSGMII) {
+				if (idx <= 3)
+					lane = serdes_get_first_lane(FSL_SRDS_1,
+							QSGMII_FM1_A);
+				else
+					lane = serdes_get_first_lane(FSL_SRDS_1,
+							QSGMII_FM1_B);
+				if (lane < 0)
+					break;
+				slot = lane_to_slot_fsm1[lane];
+				debug("FM1@DTSEC%u expects QSGMII in slot %u\n",
+				      idx + 1, slot);
+			} else {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
 						SGMII_FM1_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-			slot = lane_to_slot_fsm1[lane];
-			debug("FM1@DTSEC%u expects SGMII in slot %u\n",
-				idx + 1, slot);
+				if (lane < 0)
+					break;
+				slot = lane_to_slot_fsm1[lane];
+				debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+				      idx + 1, slot);
+			}
 			if (QIXIS_READ(present2) & (1 << (slot - 1)))
 				fm_disable_port(i);
 			switch (slot) {
@@ -600,8 +620,8 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
 		fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
 		fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
-		fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
-		fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
+		fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]);
+		fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]);
 		break;
 	case 40:
 	case 46:
@@ -641,15 +661,31 @@ int board_eth_init(bd_t *bis)
 
 	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
 		idx = i - FM2_DTSEC1;
-		switch (fm_info_get_enet_if(i)) {
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
 		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(FSL_SRDS_2,
+		case PHY_INTERFACE_MODE_QSGMII:
+			if (interface == PHY_INTERFACE_MODE_QSGMII) {
+				if (idx <= 3)
+					lane = serdes_get_first_lane(FSL_SRDS_2,
+							QSGMII_FM2_A);
+				else
+					lane = serdes_get_first_lane(FSL_SRDS_2,
+							QSGMII_FM2_B);
+				if (lane < 0)
+					break;
+				slot = lane_to_slot_fsm2[lane];
+				debug("FM2@DTSEC%u expects QSGMII in slot %u\n",
+				      idx + 1, slot);
+			} else {
+				lane = serdes_get_first_lane(FSL_SRDS_2,
 						SGMII_FM2_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-			slot = lane_to_slot_fsm2[lane];
-			debug("FM2@DTSEC%u expects SGMII in slot %u\n",
-				idx + 1, slot);
+				if (lane < 0)
+					break;
+				slot = lane_to_slot_fsm2[lane];
+				debug("FM2@DTSEC%u expects SGMII in slot %u\n",
+				      idx + 1, slot);
+			}
 			if (QIXIS_READ(present2) & (1 << (slot - 1)))
 				fm_disable_port(i);
 			switch (slot) {
diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c
index 7ee0f54786..0c1a4fbd9f 100644
--- a/board/freescale/t4qds/t4240qds.c
+++ b/board/freescale/t4qds/t4240qds.c
@@ -26,16 +26,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
+static int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
 				{8, 8}, {9, 9}, {14, 14}, {15, 15} };
 
-static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
+static int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
 				{10, 10}, {11, 11}, {12, 12}, {13, 13} };
 
-static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
+static int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
 				{10, 11}, {11, 10}, {12, 2}, {13, 3} };
 
-static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
+static int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
 				{8, 9}, {9, 8}, {14, 1}, {15, 0} };
 
 int checkboard(void)
@@ -353,25 +353,60 @@ int config_frontside_crossbar_vsc3316(void)
 	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
 			FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
-	if (srds_prtcl_s1) {
+	switch (srds_prtcl_s1) {
+	case 38:
+		/* swap first lane and third lane on slot1 */
+		vsc3316_fsm1_tx[0][1] = 14;
+		vsc3316_fsm1_tx[6][1] = 0;
+		vsc3316_fsm1_rx[1][1] = 2;
+		vsc3316_fsm1_rx[6][1] = 13;
+	case 40:
+	case 46:
+	case 48:
+		/* swap first lane and third lane on slot2 */
+		vsc3316_fsm1_tx[2][1] = 8;
+		vsc3316_fsm1_tx[4][1] = 6;
+		vsc3316_fsm1_rx[2][1] = 10;
+		vsc3316_fsm1_rx[5][1] = 5;
+	default:
 		ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8);
 		if (ret)
 			return ret;
 		ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8);
 		if (ret)
 			return ret;
+		break;
 	}
 
 	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
 				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
-	if (srds_prtcl_s2) {
+	switch (srds_prtcl_s2) {
+	case 38:
+		/* swap first lane and third lane on slot3 */
+		vsc3316_fsm2_tx[2][1] = 11;
+		vsc3316_fsm2_tx[5][1] = 4;
+		vsc3316_fsm2_rx[2][1] = 9;
+		vsc3316_fsm2_rx[4][1] = 7;
+	case 40:
+	case 46:
+	case 48:
+	case 50:
+	case 52:
+	case 54:
+		/* swap first lane and third lane on slot4 */
+		vsc3316_fsm2_tx[6][1] = 3;
+		vsc3316_fsm2_tx[1][1] = 12;
+		vsc3316_fsm2_rx[0][1] = 1;
+		vsc3316_fsm2_rx[6][1] = 15;
+	default:
 		ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8);
 		if (ret)
 			return ret;
 		ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8);
 		if (ret)
 			return ret;
+		break;
 	}
 
 	return 0;
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index dee8710316..837851838d 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -65,8 +65,8 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 
-	lbc_mhz = sysinfo.freqLocalBus / 1000000;
-	clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
+	lbc_mhz = sysinfo.freq_localbus / 1000000;
+	clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus;
 
 	debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
 
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index 97fd0e4bd1..2caefbbe58 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -143,7 +143,7 @@ void local_bus_init (void)
 
 	get_sys_info (&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	/* Disable PLL bypass for Local Bus Clock >= 66 MHz */
 	if (lbc_mhz >= 66)
diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c
index 0daa189103..c128fcb53d 100644
--- a/board/xes/xpedite537x/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
@@ -210,7 +210,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	unsigned int datarate;
 
 	get_sys_info(&sysinfo);
-	datarate = sysinfo.freqDDRBus / 1000 / 1000;
+	datarate = sysinfo.freq_ddrbus / 1000 / 1000;
 
 	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
 		if ((bopts[i].datarate_mhz_low <= datarate) &&
diff --git a/common/env_common.c b/common/env_common.c
index f387f9ab91..1ac337730c 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -140,7 +140,6 @@ int set_default_vars(int nvars, char * const vars[])
 				H_NOCLEAR | H_INTERACTIVE, nvars, vars);
 }
 
-#ifndef CONFIG_SPL_BUILD
 /*
  * Check if CRC is valid and (if yes) import the environment.
  * Note that "buf" may or may not be aligned.
@@ -172,7 +171,6 @@ int env_import(const char *buf, int check)
 
 	return 0;
 }
-#endif
 
 void env_relocate(void)
 {
diff --git a/config.mk b/config.mk
index 54e99f4da3..b3ecaa7f80 100644
--- a/config.mk
+++ b/config.mk
@@ -13,6 +13,12 @@ SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 export	SHELL
 
+ifeq ($(CONFIG_TPL_BUILD),y)
+SPL_BIN := u-boot-tpl
+else
+SPL_BIN := u-boot-spl
+endif
+
 ifeq ($(CURDIR),$(SRCTREE))
 dir :=
 else
@@ -22,7 +28,11 @@ endif
 ifneq ($(OBJTREE),$(SRCTREE))
 # Create object files for SPL in a separate directory
 ifeq ($(CONFIG_SPL_BUILD),y)
+ifeq ($(CONFIG_TPL_BUILD),y)
+obj := $(if $(dir),$(TPLTREE)/$(dir)/,$(TPLTREE)/)
+else
 obj := $(if $(dir),$(SPLTREE)/$(dir)/,$(SPLTREE)/)
+endif
 else
 obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/)
 endif
@@ -32,8 +42,12 @@ $(shell mkdir -p $(obj))
 else
 # Create object files for SPL in a separate directory
 ifeq ($(CONFIG_SPL_BUILD),y)
+ifeq ($(CONFIG_TPL_BUILD),y)
+obj := $(if $(dir),$(TPLTREE)/$(dir)/,$(TPLTREE)/)
+else
 obj := $(if $(dir),$(SPLTREE)/$(dir)/,$(SPLTREE)/)
 
+endif
 $(shell mkdir -p $(obj))
 else
 obj :=
@@ -145,6 +159,10 @@ CHECK	= sparse
 #########################################################################
 
 # Load generated board configuration
+ifeq ($(CONFIG_TPL_BUILD),y)
+# Include TPL autoconf
+sinclude $(OBJTREE)/include/tpl-autoconf.mk
+else
 ifeq ($(CONFIG_SPL_BUILD),y)
 # Include SPL autoconf
 sinclude $(OBJTREE)/include/spl-autoconf.mk
@@ -152,6 +170,7 @@ else
 # Include normal autoconf
 sinclude $(OBJTREE)/include/autoconf.mk
 endif
+endif
 sinclude $(OBJTREE)/include/config.mk
 
 # Some architecture config.mk files need to know what CPUDIR is set to,
@@ -221,12 +240,19 @@ ifneq ($(CONFIG_SPL_PAD_TO),)
 CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO)
 endif
 
+ifneq ($(CONFIG_TPL_PAD_TO),)
+CPPFLAGS += -DCONFIG_TPL_PAD_TO=$(CONFIG_TPL_PAD_TO)
+endif
+
 ifneq ($(CONFIG_UBOOT_PAD_TO),)
 CPPFLAGS += -DCONFIG_UBOOT_PAD_TO=$(CONFIG_UBOOT_PAD_TO)
 endif
 
 ifeq ($(CONFIG_SPL_BUILD),y)
 CPPFLAGS += -DCONFIG_SPL_BUILD
+ifeq ($(CONFIG_TPL_BUILD),y)
+CPPFLAGS += -DCONFIG_TPL_BUILD
+endif
 endif
 
 # Does this architecture support generic board init?
@@ -298,9 +324,9 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),)
 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
 endif
 
-LDFLAGS_u-boot-spl += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL)
+LDFLAGS_$(SPL_BIN) += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL)
 ifneq ($(CONFIG_SPL_TEXT_BASE),)
-LDFLAGS_u-boot-spl += -Ttext $(CONFIG_SPL_TEXT_BASE)
+LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
 endif
 
 # Linus' kernel sanity checking tool
diff --git a/doc/README.TPL b/doc/README.TPL
new file mode 100644
index 0000000000..1df03b958e
--- /dev/null
+++ b/doc/README.TPL
@@ -0,0 +1,45 @@
+Generic TPL framework
+=====================
+
+Overview
+--------
+
+TPL---Third Program Loader.
+
+Due to the SPL on some boards(powerpc mpc85xx) has a size limit and cannot
+be compatible with all the external device(e.g. DDR). So add a tertiary
+program loader (TPL) to enable a loader stub loaded by the code from the
+SPL. It loads the final uboot image into DDR, then jump to it to begin
+execution. Now, only the powerpc mpc85xx has this requirement and will
+implemente it.
+
+Keep consistent with SPL, with this framework almost all source files for a
+board can be reused. No code duplication or symlinking is necessary anymore.
+
+How it works
+------------
+
+There has been a directory TOPDIR/spl which contains only a Makefile. The
+Makefile is shared by SPL and TPL.
+
+The object files are built separately for SPL/TPL and placed in the
+directory spl/tpl. The final binaries which are generated are
+u-boot-{spl|tpl}, u-boot-{spl|tpl}.bin and u-boot-{spl|tpl}.map.
+
+During the TPL build a variable named CONFIG_TPL_BUILD is exported in the
+make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD.
+
+The SPL options are shared by SPL and TPL, the board config file should
+determine which SPL options to choose based on whether CONFIG_TPL_BUILD
+is set. Source files can be compiled for TPL with options choosed in the
+board config file.
+
+For example:
+
+spl/Makefile:
+LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o
+
+CONFIG_SPL_LIBCOMMON_SUPPORT is defined in board config file:
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#endif
diff --git a/doc/README.mpc85xx-sd-spi-boot b/doc/README.mpc85xx-sd-spi-boot
new file mode 100644
index 0000000000..d5043ccb66
--- /dev/null
+++ b/doc/README.mpc85xx-sd-spi-boot
@@ -0,0 +1,81 @@
+----------------------------------------
+Booting from On-Chip ROM (eSDHC or eSPI)
+----------------------------------------
+
+boot_format is a tool to write SD bootable images to a filesystem and build
+SD/SPI images to a binary file for writing later.
+
+When booting from an SD card/MMC, boot_format puts the configuration file and
+the RAM-based U-Boot image on the card.
+When booting from an EEPROM, boot_format generates a binary image that is used
+to boot from this EEPROM.
+
+Where to get boot_format:
+========================
+
+you can browse it online at:
+http://git.freescale.com/git/cgit.cgi/ppc/sdk/boot-format.git/
+
+Building
+========
+
+Run the following to build this project
+
+	$ make
+
+Execution
+=========
+
+boot_format runs under a regular Linux machine and requires a super user mode
+to run. Execute boot_format as follows.
+
+For building SD images by writing directly to a file system on SD media:
+
+	$ boot_format $config u-boot.bin -sd $device
+
+Where $config is the included config.dat file for your platform and $device
+is the target block device for the SD media on your computer.
+
+For build binary images directly a local file:
+
+	$ boot_format $config u-boot.bin -spi $file
+
+Where $file is the target file. Also keep in mind the u-boot.bin file needs
+to be the u-boot built for your particular platform and target media.
+
+Example: To generate a u-boot.bin for a P1022DS booting from SD, run the
+following in the u-boot repository:
+
+	$ make P1022DS_SDCARD
+
+Configuration Files
+===================
+
+Below are the configuration files to be used with a particular platform. Keep
+in mind that some of these config files are tied to the platforms DDR speed.
+Please see the SoC reference manual for more documentation.
+
+P1022DS		config_sram_p1022ds.dat
+P2020DS		config_sram_p2020ds.dat
+P2010DS		config_sram_p2020ds.dat
+P1020RDB	config_ddr2_1g_p1020rdb_533M.dat
+P1020RDB	config_ddr2_1g_p1020rdb_667M.dat
+P2020RDB	config_ddr2_1g_p2020rdb_800M.dat
+P2020RDB	config_ddr2_1g_p2020rdb_667M.dat
+P2020RDB	config_ddr3_1gb_64bit_p2020rdb_pc.dat
+P2010RDB	config_ddr3_1gb_64bit_p2020rdb_pc.dat
+P1020RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
+P1011RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
+P1010RDB	config_ddr3_1gb_p1010rdb_800M.dat
+P1014RDB	config_ddr3_1gb_p1014rdb_800M.dat
+P1021RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
+P1012RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
+P1022DS		config_ddr3_2gb_p1022ds.dat
+P1013DS		config_ddr3_2gb_p1022ds.dat
+P1024RDB	config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
+P1013RDB	config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
+P1025RDB	config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
+P1016RDB	config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
+P1020UTM	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
+P1020MBG	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
+MPC8536DS	config_ddr2_512m_mpc8536ds_667M.dat
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 49e5cb9c2a..bedf833f70 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -32,6 +32,9 @@ COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
 COBJS-$(CONFIG_DWMMC) += dw_mmc.o
 COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
 COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+endif
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
new file mode 100644
index 0000000000..65c52a22db
--- /dev/null
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <malloc.h>
+
+/*
+ * The environment variables are written to just after the u-boot image
+ * on SDCard, so we must read the MBR to get the start address and code
+ * length of the u-boot image, then calculate the address of the env.
+ */
+#define ESDHC_BOOT_IMAGE_SIZE	0x48
+#define ESDHC_BOOT_IMAGE_ADDR	0x50
+#define MBRDBR_BOOT_SIG_55	0x1fe
+#define MBRDBR_BOOT_SIG_AA	0x1ff
+#define CONFIG_CFG_DATA_SECTOR	0
+
+/*
+ * The main entry for mmc booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from mmc into SDRAM and starts it from there.
+ */
+
+void __noreturn mmc_boot(void)
+{
+	__attribute__((noreturn)) void (*uboot)(void);
+	uint blk_start, blk_cnt, err;
+	u32 blklen;
+	uchar *tmp_buf;
+	uchar val;
+	uint i, byte_num;
+	u32 offset, code_len;
+	struct mmc *mmc;
+
+	mmc = find_mmc_device(0);
+	if (!mmc) {
+		puts("spl: mmc device not found!!\n");
+		hang();
+	}
+
+	blklen = mmc->read_bl_len;
+	tmp_buf = malloc(blklen);
+	if (!tmp_buf) {
+		puts("spl: malloc memory failed!!\n");
+		hang();
+	}
+	memset(tmp_buf, 0, blklen);
+
+	/*
+	* Read source addr from sd card
+	*/
+	err = mmc->block_dev.block_read(0, CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
+	if (err != 1) {
+		puts("spl: mmc read failed!!\n");
+		free(tmp_buf);
+		hang();
+	}
+
+	val = *(tmp_buf + MBRDBR_BOOT_SIG_55);
+	if (0x55 != val) {
+		puts("spl: mmc signature is not valid!!\n");
+		free(tmp_buf);
+		hang();
+	}
+	val = *(tmp_buf + MBRDBR_BOOT_SIG_AA);
+	if (0xAA != val) {
+		puts("spl: mmc signature is not valid!!\n");
+		free(tmp_buf);
+		hang();
+	}
+
+	byte_num = 4;
+	offset = 0;
+	for (i = 0; i < byte_num; i++) {
+		val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i);
+		offset = (offset << 8) + val;
+	}
+	offset += CONFIG_SYS_MMC_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	byte_num = 4;
+	code_len = 0;
+	for (i = 0; i < byte_num; i++) {
+		val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i);
+		code_len = (code_len << 8) + val;
+	}
+	code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS;
+	/*
+	* Load U-Boot image from mmc into RAM
+	*/
+	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
+	err = mmc->block_dev.block_read(0, blk_start, blk_cnt,
+					(uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
+	if (err != blk_cnt) {
+		puts("spl: mmc read failed!!\n");
+		free(tmp_buf);
+		hang();
+	}
+
+	/*
+	* Clean d-cache and invalidate i-cache, to
+	* make sure that no stale data is executed.
+	*/
+	flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE);
+
+	/*
+	* Jump to U-Boot image
+	*/
+	uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START;
+	(*uboot)();
+}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 4da8db9bed..55026759ed 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1483,7 +1483,9 @@ int mmc_initialize(bd_t *bis)
 	if (board_mmc_init(bis) < 0)
 		cpu_mmc_init(bis);
 
+#ifndef CONFIG_SPL_BUILD
 	print_mmc_devices(',');
+#endif
 
 	do_preinit();
 	return 0;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index e27e0b7050..366dee6670 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -23,6 +23,7 @@ COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
 COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
 COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
 COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o
+COBJS-$(CONFIG_SPL_NAND_INIT) += nand.o
 
 else # not spl
 
diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c
index 7e5599ac63..a7476b49bb 100644
--- a/drivers/mtd/nand/fsl_elbc_spl.c
+++ b/drivers/mtd/nand/fsl_elbc_spl.c
@@ -34,7 +34,11 @@ static void nand_wait(void)
 	}
 }
 
+#ifdef CONFIG_TPL_BUILD
+int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
+#else
 static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
+#endif
 {
 	fsl_lbc_t *regs = LBC_BASE_ADDR;
 	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
@@ -114,6 +118,15 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
 }
 
 /*
+ * Defines a static function nand_load_image() here, because non-static makes
+ * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes)
+ */
+#ifndef CONFIG_TPL_BUILD
+#define nand_spl_load_image(offs, uboot_size, vdst) \
+	nand_load_image(offs, uboot_size, vdst)
+#endif
+
+/*
  * The main entry for NAND booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
  * from NAND into SDRAM and starts it from there.
@@ -124,17 +137,17 @@ void nand_boot(void)
 	/*
 	 * Load U-Boot image from NAND into RAM
 	 */
-	nand_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-			CONFIG_SYS_NAND_U_BOOT_SIZE,
-			(void *)CONFIG_SYS_NAND_U_BOOT_DST);
+	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+			    CONFIG_SYS_NAND_U_BOOT_SIZE,
+			    (void *)CONFIG_SYS_NAND_U_BOOT_DST);
 
 #ifdef CONFIG_NAND_ENV_DST
-	nand_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			(void *)CONFIG_NAND_ENV_DST);
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (void *)CONFIG_NAND_ENV_DST);
 
 #ifdef CONFIG_ENV_OFFSET_REDUND
-	nand_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
-			(void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+			    (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
 #endif
 #endif
 
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index e537fcf54c..191138ad18 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -11,6 +11,7 @@ LIB	:= $(obj)libspi_flash.o
 
 ifdef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_SPL_SPI_LOAD)	+= spi_spl_load.o
+COBJS-$(CONFIG_SPL_SPI_BOOT)	+= fsl_espi_spl.o
 endif
 
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c
new file mode 100644
index 0000000000..6263d8c221
--- /dev/null
+++ b/drivers/mtd/spi/fsl_espi_spl.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi_flash.h>
+#include <malloc.h>
+
+#define ESPI_BOOT_IMAGE_SIZE	0x48
+#define ESPI_BOOT_IMAGE_ADDR	0x50
+#define CONFIG_CFG_DATA_SECTOR	0
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void spi_boot(void)
+{
+	void (*uboot)(void) __noreturn;
+	u32 offset, code_len;
+	unsigned char *buf = NULL;
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+	/*
+	* Load U-Boot image from SPI flash into RAM
+	*/
+	buf = malloc(flash->page_size);
+	if (buf == NULL) {
+		puts("\nmalloc failed");
+		hang();
+	}
+	memset(buf, 0, flash->page_size);
+
+	spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
+		       flash->page_size, (void *)buf);
+	offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
+	/* Skip spl code */
+	offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
+	/* Skip spl code */
+	code_len = code_len - CONFIG_SPL_MAX_SIZE;
+	/* copy code to DDR */
+	spi_flash_read(flash, offset, code_len,
+		       (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST);
+	/*
+	* Jump to U-Boot image
+	*/
+	flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
+	uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
+	(*uboot)();
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 9814395b93..5d5055ff38 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -555,12 +555,14 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 		goto err_manufacturer_probe;
 	}
 #endif
+#ifndef CONFIG_SPL_BUILD
 	printf("SF: Detected %s with page size ", flash->name);
 	print_size(flash->sector_size, ", total ");
 	print_size(flash->size, "");
 	if (flash->memory_map)
 		printf(", mapped at %p", flash->memory_map);
 	puts("\n");
+#endif
 #ifndef CONFIG_SPI_FLASH_BAR
 	if (flash->size > SPI_FLASH_16MB_BOUN) {
 		puts("SF: Warning - Only lower 16MiB accessible,");
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 422c2c691e..cb099cd849 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -341,7 +341,9 @@ static int fm_eth_startup(struct fm_eth *fm_eth)
 	mac->init_mac(mac);
 
 	/* For some reason we need to set SPEED_100 */
-	if ((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) && mac->set_if_mode)
+	if (((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) ||
+	     (fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII)) &&
+	      mac->set_if_mode)
 		mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100);
 
 	/* init bmi rx port, IM mode and disable */
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 144e109fd0..592a67f2a5 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -90,6 +90,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= (IF_MODE_GMII | IF_MODE_RM);
 		break;
 	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
 		if_mode &= ~IF_MODE_MASK;
 		if_mode |= (IF_MODE_GMII);
 		break;
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
index 10c141fa26..6253f22f75 100644
--- a/drivers/net/fm/t4240.c
+++ b/drivers/net/fm/t4240.c
@@ -114,7 +114,45 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 			return PHY_INTERFACE_MODE_SGMII;
 		break;
 	default:
-		return PHY_INTERFACE_MODE_NONE;
+		break;
+	}
+
+	/* handle QSGMII */
+	switch (port) {
+	case FM1_DTSEC1:
+	case FM1_DTSEC2:
+	case FM1_DTSEC3:
+	case FM1_DTSEC4:
+		/* check lane G on SerDes1 */
+		if (is_serdes_configured(QSGMII_FM1_A))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case FM1_DTSEC5:
+	case FM1_DTSEC6:
+	case FM1_DTSEC9:
+	case FM1_DTSEC10:
+		/* check lane C on SerDes1 */
+		if (is_serdes_configured(QSGMII_FM1_B))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case FM2_DTSEC1:
+	case FM2_DTSEC2:
+	case FM2_DTSEC3:
+	case FM2_DTSEC4:
+		/* check lane G on SerDes2 */
+		if (is_serdes_configured(QSGMII_FM2_A))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case FM2_DTSEC5:
+	case FM2_DTSEC6:
+	case FM2_DTSEC9:
+	case FM2_DTSEC10:
+		/* check lane C on SerDes2 */
+		if (is_serdes_configured(QSGMII_FM2_B))
+			return PHY_INTERFACE_MODE_QSGMII;
+		break;
+	default:
+		break;
 	}
 
 	return PHY_INTERFACE_MODE_NONE;
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
index c883d3cac0..7c84582762 100644
--- a/drivers/spi/fsl_espi.c
+++ b/drivers/spi/fsl_espi.c
@@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 	/* Set eSPI BRG clock source */
 	get_sys_info(&sysinfo);
-	spibrg = sysinfo.freqSystemBus / 2;
+	spibrg = sysinfo.freq_systembus / 2;
 	fsl->div16 = 0;
 	if ((spibrg / max_hz) > 32) {
 		fsl->div16 = ESPI_CSMODE_DIV16;
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 6c6ce58fb8..ddcbfa6a26 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -24,7 +24,6 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index d1ce9fdc8d..edece1f9b5 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -16,42 +16,105 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#define CONFIG_SPL
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_MMC_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_FSL_LAW			/* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE		0x11001000
+#define CONFIG_SPL_TEXT_BASE		0xf8f81000
+#define CONFIG_SPL_PAD_TO		0x18000
+#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SYS_MMC_U_BOOT_SIZE	(512 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
+#define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SPL_MMC_BOOT
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_COMMON_INIT_DDR
+#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#define CONFIG_SPL
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_FSL_LAW		/* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE		0x11001000
+#define CONFIG_SPL_TEXT_BASE		0xf8f81000
+#define CONFIG_SPL_PAD_TO		0x18000
+#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(512 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SPL_SPI_BOOT
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_COMMON_INIT_DDR
+#endif
 #endif
 
 #define CONFIG_NAND_FSL_ELBC
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL
+#define CONFIG_TPL
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_SPL_NAND_BOOT
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NAND_INIT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_COMMON_INIT_DDR
+#define CONFIG_SPL_MAX_SIZE		(128 << 10)
+#define CONFIG_SPL_TEXT_BASE		0xf8f81000
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(576 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
+#define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
+#elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-
-#define CONFIG_SYS_TEXT_BASE           0x00201000
-#define CONFIG_SPL_TEXT_BASE           0xfffff000
-#define CONFIG_SPL_MAX_SIZE            4096
-#define CONFIG_SPL_RELOC_TEXT_BASE     0x00100000
-#define CONFIG_SPL_RELOC_STACK         0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((512 << 10) + CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_DST     (0x00200000 - CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0
-#define CONFIG_SYS_LDSCRIPT            "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SPL_TEXT_BASE		0xff800000
+#define CONFIG_SPL_MAX_SIZE		4096
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST	0xf8f80000
+#define CONFIG_SYS_NAND_U_BOOT_START	0xf8f80000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
+#endif
+#define CONFIG_SPL_PAD_TO		0x20000
+#define CONFIG_TPL_PAD_TO		0x20000
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SYS_TEXT_BASE		0x11001000
+#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 /* High Level Configuration Options */
@@ -225,11 +288,11 @@
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 #endif
 
-#define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE, }
+#define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND			1
-#define CONFIG_SYS_NAND_BLOCK_SIZE    (256 * 1024)
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(256 * 1024)
 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
 
 /* NAND flash config */
@@ -292,6 +355,43 @@
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
 /*
+ * Config the L2 Cache as L2 SRAM
+*/
+#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(96 << 10)
+#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
+#elif defined(CONFIG_NAND)
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
+#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
+#else
+#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x2000)
+#define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
+#endif
+#endif
+#endif
+
+/*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		1
@@ -299,7 +399,7 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
@@ -521,7 +621,7 @@
 /*
  * Environment
  */
-#ifdef CONFIG_RAMBOOT_SPIFLASH
+#ifdef CONFIG_SPIFLASH
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
 #define CONFIG_ENV_SPI_CS	0
@@ -530,14 +630,20 @@
 #define CONFIG_ENV_SIZE		0x2000	/* 8KB */
 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
 #define CONFIG_ENV_SECT_SIZE	0x10000
-#elif defined(CONFIG_RAMBOOT_SDCARD)
+#elif defined(CONFIG_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_SYS_MMC_ENV_DEV	0
 #elif defined(CONFIG_NAND)
-#define CONFIG_ENV_IS_IN_NAND
+#ifdef CONFIG_TPL_BUILD
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
+#else
 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#endif
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET	(1024 * 1024)
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_SYS_RAMBOOT)
 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 9657228449..5f0c4fb254 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -172,7 +172,6 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
diff --git a/include/e500.h b/include/e500.h
index 0ff8e89a1e..0c2432657b 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -10,19 +10,19 @@
 
 typedef struct
 {
-  unsigned long freqProcessor[CONFIG_MAX_CPUS];
-  unsigned long freqSystemBus;
-  unsigned long freqDDRBus;
-  unsigned long freqLocalBus;
-  unsigned long freqQE;
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+	unsigned long freq_qe;
 #ifdef CONFIG_SYS_DPAA_FMAN
-  unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
+	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
 #endif
 #ifdef CONFIG_SYS_DPAA_QBMAN
-  unsigned long freqQMAN;
+	unsigned long freq_qman;
 #endif
 #ifdef CONFIG_SYS_DPAA_PME
-  unsigned long freqPME;
+	unsigned long freq_pme;
 #endif
 } MPC85xx_SYS_INFO;
 
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 2c97398f4e..89bcbd1700 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -182,5 +182,6 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd);
 static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
 static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}
 #endif /* CONFIG_FSL_ESDHC */
+void __noreturn mmc_boot(void);
 
 #endif  /* __FSL_ESDHC_H__ */
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index 31e83f2cc9..9fe4748032 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -41,9 +41,9 @@
 #ifndef __ASSEMBLY__
 
 typedef struct {
-	unsigned long freqProcessor;
-	unsigned long freqSystemBus;
-	unsigned long freqLocalBus;
+	unsigned long freq_processor;
+	unsigned long freq_systembus;
+	unsigned long freq_localbus;
 } MPC86xx_SYS_INFO;
 
 #define l1icache_enable	icache_enable
diff --git a/spl/Makefile b/spl/Makefile
index 02f4860755..339e5e8971 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -17,10 +17,22 @@
 CONFIG_SPL_BUILD := y
 export CONFIG_SPL_BUILD
 
+ifeq ($(CONFIG_TPL_BUILD),y)
+export CONFIG_TPL_BUILD
+SPL_BIN := u-boot-tpl
+else
+SPL_BIN := u-boot-spl
+endif
+
 include $(TOPDIR)/config.mk
 
 # We want the final binaries in this directory
+ifeq ($(CONFIG_TPL_BUILD),y)
+obj := $(OBJTREE)/tpl/
+SPLTREE := $(TPLTREE)
+else
 obj := $(OBJTREE)/spl/
+endif
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(SRCTREE)/board/$(VENDOR)/common/Makefile),y,n)
 
@@ -50,6 +62,9 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 ifeq ($(CPU),mpc85xx)
 LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
+ifdef CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
+endif
 endif
 ifeq ($(CPU),mpc86xx)
 LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
@@ -158,7 +173,7 @@ $(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin
 $(OBJTREE)/SPL : $(obj)u-boot-spl.bin depend
 		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
 
-ALL-y	+= $(obj)u-boot-spl.bin
+ALL-y	+= $(obj)$(SPL_BIN).bin
 
 ifdef CONFIG_SAMSUNG
 ALL-y	+= $(obj)$(BOARD)-spl.bin
@@ -172,15 +187,15 @@ $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin
 		$(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin
 endif
 
-$(obj)u-boot-spl.bin:	$(obj)u-boot-spl
+$(obj)$(SPL_BIN).bin:	$(obj)$(SPL_BIN)
 	$(OBJCOPY) $(OBJCFLAGS) -O binary $< $@
 
 GEN_UBOOT = \
 	cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \
 		--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-		-Map u-boot-spl.map -o u-boot-spl
+		-Map $(SPL_BIN).map -o $(SPL_BIN)
 
-$(obj)u-boot-spl:	depend $(START) $(LIBS) $(obj)u-boot-spl.lds
+$(obj)$(SPL_BIN):	depend $(START) $(LIBS) $(obj)u-boot-spl.lds
 	$(GEN_UBOOT)
 
 $(START):	depend