sun6i: Add clock functions needed for SPL / DRAM init

Add clock_init_safe and clockset_pll5 functions, as these are needed for
SPL support resp. DRAM init (which is needed for SPL too).

Also add some extra clock register constant defines.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

5 files changed, 106 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index 1eae9767d0..16ab6f3729 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -16,6 +16,33 @@
 #include <asm/arch/prcm.h>
 #include <asm/arch/sys_proto.h>
 
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_prcm_reg * const prcm =
+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+	/* Set PLL ldo voltage without this PLL6 does not work properly */
+	clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
+			PRCM_PLL_CTRL_LDO_KEY);
+	clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
+		PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
+		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
+	clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+
+	clock_set_pll1(408000000);
+
+	writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+
+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+
+	writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
+	writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
+}
+#endif
+
 void clock_init_uart(void)
 {
 	struct sunxi_ccm_reg *const ccm =
@@ -65,6 +92,56 @@ int clock_twi_onoff(int port, int state)
 	return 0;
 }
 
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int k = 1;
+	int m = 1;
+
+	if (clk > 1152000000) {
+		k = 2;
+	} else if (clk > 768000000) {
+		k = 3;
+		m = 2;
+	}
+
+	/* Switch to 24MHz clock while changing PLL1 */
+	writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+	       ATB_DIV_2 << ATB_DIV_SHIFT |
+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_axi_cfg);
+
+	/* PLL1 rate = 24000000 * n * k / m */
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_MAGIC |
+	       CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) |
+	       CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg);
+	sdelay(200);
+
+	/* Switch CPU to PLL1 */
+	writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+	       ATB_DIV_2 << ATB_DIV_SHIFT |
+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+	       &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll5(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int k = 2;
+	const int m = 1;
+
+	/* PLL5 rate = 24000000 * n * k / m */
+	writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
+	       CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) |
+	       CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg);
+
+	udelay(5500);
+}
+
 unsigned int clock_get_pll6(void)
 {
 	struct sunxi_ccm_reg *const ccm =
diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
index 42382a8ae2..b40c16b6e7 100644
--- a/arch/arm/include/asm/arch-sunxi/clock.h
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -25,6 +25,7 @@
 int clock_init(void);
 int clock_twi_onoff(int port, int state);
 void clock_set_pll1(unsigned int hz);
+void clock_set_pll5(unsigned int hz);
 unsigned int clock_get_pll5p(void);
 unsigned int clock_get_pll6(void);
 void clock_init_safe(void);
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 1397b35889..4992dbc503 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -170,7 +170,17 @@ struct sunxi_ccm_reg {
 #define CPU_CLK_SRC_OSC24M		1
 #define CPU_CLK_SRC_PLL1		2
 
-#define PLL1_CFG_DEFAULT		0x90011b21
+#define CCM_PLL1_CTRL_M(n)		((((n) - 1) & 0x3) << 0)
+#define CCM_PLL1_CTRL_K(n)		((((n) - 1) & 0x3) << 4)
+#define CCM_PLL1_CTRL_N(n)		((((n) - 1) & 0x1f) << 8)
+#define CCM_PLL1_CTRL_MAGIC		(0x1 << 16)
+#define CCM_PLL1_CTRL_EN		(0x1 << 31)
+
+#define CCM_PLL5_CTRL_M(n)		((((n) - 1) & 0x3) << 0)
+#define CCM_PLL5_CTRL_K(n)		((((n) - 1) & 0x3) << 4)
+#define CCM_PLL5_CTRL_N(n)		((((n) - 1) & 0x1f) << 8)
+#define CCM_PLL5_CTRL_UPD		(0x1 << 20)
+#define CCM_PLL5_CTRL_EN		(0x1 << 31)
 
 #define PLL6_CFG_DEFAULT		0x90041811
 
@@ -179,6 +189,11 @@ struct sunxi_ccm_reg {
 #define CCM_PLL6_CTRL_K_SHIFT		4
 #define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
 
+#define AHB1_ABP1_DIV_DEFAULT		0x00002020
+
+#define AXI_GATE_OFFSET_DRAM		0
+
+#define AHB_GATE_OFFSET_MCTL		14
 #define AHB_GATE_OFFSET_MMC3		11
 #define AHB_GATE_OFFSET_MMC2		10
 #define AHB_GATE_OFFSET_MMC1		9
@@ -190,6 +205,16 @@ struct sunxi_ccm_reg {
 
 #define CCM_MMC_CTRL_ENABLE (0x1 << 31)
 
+#define MDFS_CLK_DEFAULT		0x81000002 /* PLL6 / 3 */
+
+#define CCM_DRAMCLK_CFG_DIV0(x)		((x - 1) << 8)
+#define CCM_DRAMCLK_CFG_DIV0_MASK	(0xf << 8)
+#define CCM_DRAMCLK_CFG_UPD		(0x1 << 16)
+#define CCM_DRAMCLK_CFG_RST		(0x1 << 31)
+
+#define MBUS_CLK_DEFAULT		0x81000001 /* PLL6 / 2 */
+
+#define AHB_RESET_OFFSET_MCTL		14
 #define AHB_RESET_OFFSET_MMC3		11
 #define AHB_RESET_OFFSET_MMC2		10
 #define AHB_RESET_OFFSET_MMC1		9
diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
index 3d3bfa6cd1..88de1ff675 100644
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -119,6 +119,7 @@
 #define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
 	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
 #define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
 
 #define PRCM_CLK_1WIRE_GATE (0x1 << 31)
 
diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h
index b7144745c9..9558771515 100644
--- a/include/configs/sun6i.h
+++ b/include/configs/sun6i.h
@@ -14,6 +14,7 @@
 /*
  * A31 specific configuration
  */
+#define CONFIG_CLK_FULL_SPEED		1008000000
 
 #define CONFIG_SYS_PROMPT		"sun6i# "