fsl/ls1021qds: Add deep sleep support

Add deep sleep support on Freescale LS1021QDS platform.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
[York Sun: Fix conflict in fdt.c]
Reviewed-by: York Sun <yorksun@freescale.com>

4 files changed, 69 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index e0288b8c3f..71a175392f 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -124,6 +124,25 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
 			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 
+#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
+#define UBOOT_HEAD_LEN	0x1000
+	/*
+	 * Reserved memory in SD boot deep sleep case.
+	 * Second stage uboot binary and malloc space should be reserved.
+	 * If the memory they occupied has not been reserved, then this
+	 * space would be used by kernel and overwritten in uboot when
+	 * deep sleep resume, which cause deep sleep failed.
+	 * Since second uboot binary has a head, that space need to be
+	 * reserved either(assuming its size is less than 0x1000).
+	 */
+	off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
+			CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
+			UBOOT_HEAD_LEN);
+	if (off < 0)
+		printf("Failed to reserve memory for SD boot deep sleep: %s\n",
+		       fdt_strerror(off));
+#endif
+
 #if defined(CONFIG_FSL_ESDHC)
 	fdt_fixup_esdhc(blob, bd);
 #endif
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index a539ff9791..6435bf9ad1 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
+#include <asm/io.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -149,6 +150,17 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 }
 #endif
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -159,6 +171,11 @@ phys_size_t initdram(int board_type)
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
 
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index f2dda22df6..20eade4651 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -20,6 +20,7 @@
 #include <fsl_sec.h>
 #include <spl.h>
 
+#include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "ls1021aqds_qixis.h"
 #ifdef CONFIG_U_QE
@@ -218,6 +219,11 @@ int board_early_init_f(void)
 	 * allow barrier transaction to DDR again */
 	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
 
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	return 0;
 }
 
@@ -251,6 +257,11 @@ void board_init_f(ulong dummy)
 
 	get_clocks();
 
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	preloader_console_init();
 
 #ifdef CONFIG_SPL_I2C_SUPPORT
@@ -544,6 +555,21 @@ int board_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_sleep_prepare(void)
+{
+	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+
+	/* Set CCI-400 control override register to
+	 * enable barrier transaction */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#endif
+}
+#endif
+
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 296ded9f5e..2874ccc6fa 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -19,6 +19,11 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
+#define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
+#define CONFIG_SILENT_CONSOLE
+#endif
+
 /*
  * Size of malloc() pool
  */
@@ -72,7 +77,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO		0x1c000
 #define CONFIG_SYS_TEXT_BASE		0x82000000
 
-#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
+		CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000