arm, at91: add axm extensions

add extensions for the axm board:
- power on LED on power up
- press both recovery buttons on power up to enter
  recovery mode
- detect 64 MiB and 128 MiB ramsize
- PHY rest at reboot because of ATMEL bug
- use siemens update concept
- add axm default environment
- set CONFIG_SPL_MAX_SIZE to 15k

Signed-off-by: Heiko Schocher <hs@denx.de>

2 files changed, 249 insertions, 18 deletions

diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index 013dac2e2f..781727e14e 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -12,6 +12,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <command.h>
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/at91sam9260_matrix.h>
@@ -79,16 +80,48 @@ void matrix_init(void)
 			&mat->scfg[3]);
 }
 
+#if defined(CONFIG_BOARD_AXM)
+static int at91_is_recovery(void)
+{
+	if ((at91_get_gpio_value(AT91_PIN_PA26) == 0) &&
+	    (at91_get_gpio_value(AT91_PIN_PA27) == 0))
+		return 1;
+
+	return 0;
+}
+#elif defined(CONFIG_BOARD_TAURUS)
+static int at91_is_recovery(void)
+{
+	if (at91_get_gpio_value(AT91_PIN_PA31) == 0)
+		return 1;
+
+	return 0;
+}
+#endif
+
 void at91_spl_board_init(void)
 {
 	taurus_nand_hw_init();
 	at91_spi0_hw_init(TAURUS_SPI_MASK);
 
+#if defined(CONFIG_BOARD_AXM)
+	/* Configure LED PINs */
+	at91_set_gpio_output(AT91_PIN_PA6, 0);
+	at91_set_gpio_output(AT91_PIN_PA8, 0);
+	at91_set_gpio_output(AT91_PIN_PA9, 0);
+	at91_set_gpio_output(AT91_PIN_PA10, 0);
+	at91_set_gpio_output(AT91_PIN_PA11, 0);
+	at91_set_gpio_output(AT91_PIN_PA12, 0);
+
 	/* Configure recovery button PINs */
+	at91_set_gpio_input(AT91_PIN_PA26, 1);
+	at91_set_gpio_input(AT91_PIN_PA27, 1);
+#elif defined(CONFIG_BOARD_TAURUS)
 	at91_set_gpio_input(AT91_PIN_PA31, 1);
+#endif
 
-	/* check if button is pressed */
-	if (at91_get_gpio_value(AT91_PIN_PA31) == 0) {
+	/* check for recovery mode */
+	if (at91_is_recovery() == 1) {
 		struct spi_flash *flash;
 
 		debug("Recovery button pressed\n");
@@ -108,35 +141,72 @@ void at91_spl_board_init(void)
 	}
 }
 
-void mem_init(void)
+#define SDRAM_BASE_CONF	(AT91_SDRAMC_NR_13 | AT91_SDRAMC_CAS_3 \
+			 |AT91_SDRAMC_NB_4 | AT91_SDRAMC_DBW_32 \
+			 | AT91_SDRAMC_TWR_VAL(3) | AT91_SDRAMC_TRC_VAL(9) \
+			 | AT91_SDRAMC_TRP_VAL(3) | AT91_SDRAMC_TRCD_VAL(3) \
+			 | AT91_SDRAMC_TRAS_VAL(6) | AT91_SDRAMC_TXSR_VAL(10))
+
+void sdramc_configure(unsigned int mask)
 {
 	struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX;
 	struct sdramc_reg setting;
 
 	at91_sdram_hw_init();
-	setting.cr = (AT91_SDRAMC_NC_9 |
-		      AT91_SDRAMC_NR_13 |
-		      AT91_SDRAMC_CAS_3 |
-		      AT91_SDRAMC_NB_4 |
-		      AT91_SDRAMC_DBW_32 |
-		      AT91_SDRAMC_TWR_VAL(3) |
-		      AT91_SDRAMC_TRC_VAL(9) |
-		      AT91_SDRAMC_TRP_VAL(3) |
-		      AT91_SDRAMC_TRCD_VAL(3) |
-		      AT91_SDRAMC_TRAS_VAL(6) |
-		      AT91_SDRAMC_TXSR_VAL(10));
+	setting.cr = SDRAM_BASE_CONF | mask;
 	setting.mdr = AT91_SDRAMC_MD_SDRAM;
 	setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000;
 
-
 	writel(readl(&ma->ebicsa) | AT91_MATRIX_CS1A_SDRAMC |
 		AT91_MATRIX_VDDIOMSEL_3_3V | AT91_MATRIX_EBI_IOSR_SEL,
 		&ma->ebicsa);
+
 	sdramc_initialize(ATMEL_BASE_CS1, &setting);
 }
+
+void mem_init(void)
+{
+	unsigned int ram_size = 0;
+
+	/* Configure SDRAM for 128MB */
+	sdramc_configure(AT91_SDRAMC_NC_10);
+
+	/* Do memtest for 128MB */
+	ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				CONFIG_SYS_SDRAM_SIZE);
+
+	/*
+	 * If 32MB or 16MB should be supported check also for
+	 * expected mirroring at A16 and A17
+	 * To find mirror addresses depends how the collumns are connected
+	 * at RAM (internaly or externaly)
+	 * If the collumns are not in inverted order the mirror size effect
+	 * behaves like normal SRAM with A0,A1,A2,etc. connected incremantal
+	 */
+
+	/* Mirrors at A15 on ATMEL G20 SDRAM Controller with 64MB*/
+	if (ram_size == 0x800) {
+		printf("\n\r 64MB");
+		sdramc_configure(AT91_SDRAMC_NC_9);
+	} else {
+		/* Size already initialized */
+		printf("\n\r 128MB");
+	}
+}
 #endif
 
 #ifdef CONFIG_MACB
+static void siemens_phy_reset(void)
+{
+	/*
+	 * we need to reset PHY for 200us
+	 * because of bug in ATMEL G20 CPU (undefined initial state of GPIO)
+	 */
+	if ((readl(AT91_ASM_RSTC_SR) & AT91_RSTC_RSTTYP) ==
+	    AT91_RSTC_RSTTYP_GENERAL)
+		at91_set_gpio_value(AT91_PIN_PA25, 0); /* reset eth switch */
+}
+
 static void taurus_macb_hw_init(void)
 {
 	/* Enable EMAC clock */
@@ -160,6 +230,8 @@ static void taurus_macb_hw_init(void)
 	at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0);
 	at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0);
 
+	siemens_phy_reset();
+
 	at91_phy_reset();
 
 	at91_set_gpio_input(AT91_PIN_PA25, 1);   /* ERST tri-state */
@@ -244,3 +316,97 @@ int board_eth_init(bd_t *bis)
 #endif
 	return rc;
 }
+
+#if !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_BOARD_AXM)
+/*
+ * Booting the Fallback Image.
+ *
+ *  The function is used to provide and
+ *  boot the image with the fallback
+ *  parameters, incase if the faulty image
+ *  in upgraded over the base firmware.
+ *
+ */
+static int upgrade_failure_fallback(void)
+{
+	char *partitionset_active = NULL;
+	char *rootfs = NULL;
+	char *rootfs_fallback = NULL;
+	char *kern_off;
+	char *kern_off_fb;
+	char *kern_size;
+	char *kern_size_fb;
+
+	partitionset_active = getenv("partitionset_active");
+	if (partitionset_active) {
+		if (partitionset_active[0] == 'A')
+			setenv("partitionset_active", "B");
+		else
+			setenv("partitionset_active", "A");
+	} else {
+		printf("partitionset_active missing.\n");
+		return -ENOENT;
+	}
+
+	rootfs = getenv("rootfs");
+	rootfs_fallback = getenv("rootfs_fallback");
+	setenv("rootfs", rootfs_fallback);
+	setenv("rootfs_fallback", rootfs);
+
+	kern_size = getenv("kernel_size");
+	kern_size_fb = getenv("kernel_size_fallback");
+	setenv("kernel_size", kern_size_fb);
+	setenv("kernel_size_fallback", kern_size);
+
+	kern_off = getenv("kernel_Off");
+	kern_off_fb = getenv("kernel_Off_fallback");
+	setenv("kernel_Off", kern_off_fb);
+	setenv("kernel_Off_fallback", kern_off);
+
+	setenv("bootargs", '\0');
+	setenv("upgrade_available", '\0');
+	setenv("boot_retries", '\0');
+	saveenv();
+
+	return 0;
+}
+
+static int do_upgrade_available(cmd_tbl_t *cmdtp, int flag, int argc,
+			char * const argv[])
+{
+	unsigned long upgrade_available = 0;
+	unsigned long boot_retry = 0;
+	char boot_buf[10];
+
+	upgrade_available = simple_strtoul(getenv("upgrade_available"), NULL,
+					   10);
+	if (upgrade_available) {
+		boot_retry = simple_strtoul(getenv("boot_retries"), NULL, 10);
+		boot_retry++;
+		sprintf(boot_buf, "%lx", boot_retry);
+		setenv("boot_retries", boot_buf);
+		saveenv();
+
+		/*
+		 * Here the boot_retries count is checked, and if the
+		 * count becomes greater than 2 switch back to the
+		 * fallback, and reset the board.
+		 */
+
+		if (boot_retry > 2) {
+			if (upgrade_failure_fallback() == 0)
+				do_reset(NULL, 0, 0, NULL);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+U_BOOT_CMD(
+	upgrade_available,	1,	1,	do_upgrade_available,
+	"check Siemens update",
+	"no parameters"
+);
+#endif
+#endif
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 2c9f5da55a..fb7c5758e4 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -20,6 +20,7 @@
  * In this case SoC is defined in boards.cfg.
  */
 #include <asm/hardware.h>
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_GENERIC_BOARD
 
@@ -158,12 +159,75 @@
 #define CONFIG_ENV_OFFSET_REDUND	0x180000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
-#define CONFIG_BOOTARGS							\
+
+#if defined(CONFIG_BOARD_TAURUS)
+#define	CONFIG_BOOTARGS_TAURUS						\
 	"console=ttyS0,115200 earlyprintk "				\
 	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
 	"256k(env),256k(env_redundant),256k(spare),"			\
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#endif
+
+#if defined(CONFIG_BOARD_AXM)
+#define CONFIG_BOOTARGS_AXM						\
+	"\0"	\
+	"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:"	\
+	"${gatewayip}:${netmask}:${hostname}:${netdev}::off\0"		\
+	"addtest=setenv bootargs ${bootargs} loglevel=4 test\0"		\
+	"baudrate=115200\0"						\
+	"boot_file=setenv bootfile /${project_dir}/kernel/uImage\0"	\
+	"boot_retries=0\0"						\
+	"bootcmd=run flash_self\0"					\
+	"bootdelay=3\0"							\
+	"ethact=macb0\0"						\
+	"flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;"\
+	"bootm ${kernel_ram};reset\0"					\
+	"flash_self=run nand_kernel;run setbootargs;upgrade_available;" \
+	"bootm ${kernel_ram};reset\0"					\
+	"flash_self_test=run nand_kernel;run setbootargs addtest; "	\
+	"upgrade_available;bootm ${kernel_ram};reset\0"			\
+	"hostname=systemone\0"						\
+	"kernel_Off=0x00200000\0"					\
+	"kernel_Off_fallback=0x03800000\0"				\
+	"kernel_ram=0x21500000\0"					\
+	"kernel_size=0x00400000\0"					\
+	"kernel_size_fallback=0x00400000\0"				\
+	"loads_echo=1\0"						\
+	"nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} "		\
+		"${kernel_size}\0"					\
+	"net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};"		\
+	"run nfsargs;run addip;upgrade_available;bootm "		\
+		"${kernel_ram};reset\0"					\
+	"netdev=eth0\0"							\
+	"nfsargs=run root_path;setenv bootargs ${bootargs} "		\
+	"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "		\
+	"at91sam9_wdt.wdt_timeout=16\0"					\
+	"partitionset_active=A\0"					\
+	"preboot=echo;echo Type 'run flash_self' to use kernel and root "\
+	"filesystem on memory;echo Type 'run flash_nfs' to use kernel "	\
+	"from memory and root filesystem over NFS;echo Type 'run net_nfs' "\
+	"to get Kernel over TFTP and mount root filesystem over NFS;echo\0"\
+	"project_dir=systemone\0"					\
+	"root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0"\
+	"rootfs=/dev/mtdblock5\0"					\
+	"rootfs_fallback=/dev/mtdblock7\0"				\
+	"setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops "\
+		"root=${rootfs} rootfstype=jffs2 panic=7 "		\
+		"at91sam9_wdt.wdt_timeout=16\0"				\
+	"stderr=serial\0"						\
+	"stdin=serial\0"						\
+	"stdout=serial\0"						\
+	"upgrade_available=0\0"
+#endif
+
+#if defined(CONFIG_BOARD_TAURUS)
+#define CONFIG_BOOTARGS		CONFIG_BOOTARGS_TAURUS
+#endif
+
+#if defined(CONFIG_BOARD_AXM)
+#define CONFIG_BOOTARGS		CONFIG_BOOTARGS_AXM
+#endif
 
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
@@ -182,8 +246,8 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x0
-#define CONFIG_SPL_MAX_SIZE		(14 * 1024)
-#define CONFIG_SPL_STACK		(16 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(31 * SZ_512)
+#define	CONFIG_SPL_STACK		(ATMEL_BASE_SRAM1 + SZ_16K)
 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 					CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
@@ -232,4 +296,5 @@
 #define CONFIG_SYS_MCKR			0x1300
 #define CONFIG_SYS_MCKR_CSS		(0x02 | CONFIG_SYS_MCKR)
 #define CONFIG_SYS_AT91_PLLB		0x10193F05
+
 #endif