EfikaMX: Add imximage config for Efika SB

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>

4 files changed, 125 insertions, 1 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 8182430352..287938a048 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -851,6 +851,7 @@ Marek Vasut <marek.vasut@gmail.com>
 	vpac270		xscale/pxa
 	zipitz2		xscale/pxa
  	efikamx		i.MX51
+	efikasb		i.MX51
 
 Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
 
diff --git a/board/efikamx/imximage.cfg b/board/efikamx/imximage_mx.cfg
index 6fe0ff9ac4..6fe0ff9ac4 100644
--- a/board/efikamx/imximage.cfg
+++ b/board/efikamx/imximage_mx.cfg
diff --git a/board/efikamx/imximage_sb.cfg b/board/efikamx/imximage_sb.cfg
new file mode 100644
index 0000000000..878146f442
--- /dev/null
+++ b/board/efikamx/imximage_sb.cfg
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+#
+# BASED ON: imx51evk
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+BOOT_FROM	spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type           Address        Value
+#
+# where:
+#	Addr-type register length (1,2 or 4 bytes)
+#	Address	  absolute address of the register
+#	value	  value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73fa88a0 0x200
+DATA 4 0x73fa850c 0x20c3
+DATA 4 0x73fa8510 0x20c3
+DATA 4 0x73fa883c 0x2
+DATA 4 0x73fa8848 0x2
+DATA 4 0x73fa84b8 0xe7
+DATA 4 0x73fa84bc 0x45
+DATA 4 0x73fa84c0 0x45
+DATA 4 0x73fa84c4 0x45
+DATA 4 0x73fa84c8 0x45
+DATA 4 0x73fa8820 0x0
+DATA 4 0x73fa84a4 0x5
+DATA 4 0x73fa84a8 0x5
+DATA 4 0x73fa84ac 0xe3
+DATA 4 0x73fa84b0 0xe3
+DATA 4 0x73fa84b4 0xe3
+DATA 4 0x73fa84cc 0xe3
+DATA 4 0x73fa84d0 0xe2
+
+DATA 4 0x73fa882c 0x4
+DATA 4 0x73fa88a4 0x4
+DATA 4 0x73fa88ac 0x4
+DATA 4 0x73fa88b8 0x4
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83fd9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83fd9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83fd9004 0x333574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83fd900c 0x333574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x0000801a
+DATA 4 0x83fd9014 0x0000801b
+DATA 4 0x83fd9014 0x00448019
+DATA 4 0x83fd9014 0x07328018
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x06328018
+DATA 4 0x83fd9014 0x03808019
+DATA 4 0x83fd9014 0x00408019
+DATA 4 0x83fd9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x0000801e
+DATA 4 0x83fd9014 0x0000801f
+DATA 4 0x83fd9014 0x0000801d
+DATA 4 0x83fd9014 0x0732801c
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x0632801c
+DATA 4 0x83fd9014 0x0380801d
+DATA 4 0x83fd9014 0x0040801d
+DATA 4 0x83fd9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83fd9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83fd9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83fd9034 0x90000000
+DATA 4 0x83fd9014 0x00000000
diff --git a/boards.cfg b/boards.cfg
index 271e420be8..0af96f54c6 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -157,7 +157,8 @@ dkb			     arm         arm926ejs   -                   Marvell        pantheon
 integratorap_cm946es         arm         arm946es    integrator          armltd         -               integratorap
 integratorcp_cm946es         arm         arm946es    integrator          armltd         -               integratorcp
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
-efikamx                      arm         armv7       efikamx             -              mx5		efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
+efikamx                      arm         armv7       efikamx             -              mx5		efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
+efikasb                      arm         armv7       efikamx             -              mx5		efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
 mx51evk                      arm         armv7       mx51evk             freescale      mx5		mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
 mx53ard                      arm         armv7       mx53ard             freescale      mx5		mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
 mx53evk                      arm         armv7       mx53evk             freescale      mx5		mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg