mini2440.h: Delete remainder of dead board

Commit af5b9b1f removed mini2440 board support,
but missed to delete include/configs/mini2440.h.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

1 files changed, 0 insertions, 170 deletions

diff --git a/include/configs/mini2440.h b/include/configs/mini2440.h
deleted file mode 100644
index 5e9e98d2fc..0000000000
--- a/include/configs/mini2440.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <gj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2009-2010
- * Michel Pollet <buserror@gmail.com>
- *
- * (C) Copyright 2012
- * Gabriel Huau <contact@huau-gabriel.fr>
- *
- * Configuation settings for the MINI2440 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_TEXT_BASE 0x0
-#define CONFIG_S3C2440_GPIO
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARM920T			/* This is an ARM920T Core	*/
-#define CONFIG_S3C24X0			/* in a SAMSUNG S3C24X0 SoC */
-#define CONFIG_S3C2440			/* in a SAMSUNG S3C2440 SoC */
-#define CONFIG_MINI2440			/* on a MIN2440 Board       */
-
-#define MACH_TYPE_MINI2440	1999
-#define CONFIG_MACH_TYPE	MACH_TYPE_MINI2440
-
-/*
- * We don't use lowlevel_init
- */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*
- * input clock of PLL
- */
-/* MINI2440 has 12.0000MHz input clock */
-#define CONFIG_SYS_CLK_FREQ	12000000
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 2048*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_DM9000
-#define CONFIG_DRIVER_DM9000_NO_EEPROM
-#define CONFIG_DM9000_BASE				0x20000300
-#define DM9000_IO		CONFIG_DM9000_BASE
-#define DM9000_DATA		(CONFIG_DM9000_BASE+4)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1
-
-/*
- * allow to overwrite serial and ethaddr
- */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Command definition
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_LONGHELP
-#define CONFIG_SYS_PROMPT	"MINI2440 => "
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	32
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START	0x30000000
-#define CONFIG_SYS_MEMTEST_END		0x34000000	/* 64MB in DRAM	*/
-
-/* default load address	*/
-#define CONFIG_SYS_LOAD_ADDR		0x32000000
-
-/* boot parameters address */
-#define CONFIG_BOOT_PARAM_ADDR		0x30000100
-
-/*
- * the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need
- * it to wrap 100 times (total 1562500) to get 1 sec.
- */
-#define CONFIG_SYS_HZ			1562500
-
-/*
- * valid baudrates
- */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BAUDRATE		115200
-
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS        1          /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_SIZE             (64*1024*1024) /* 64MB of DRAM */
-#define CONFIG_SYS_SDRAM_BASE       0x30000000
-#define CONFIG_SYS_FLASH_BASE		0x0
-
-/*
- * Stack should be on the SRAM because
- * DRAM is not init
- */
-#define CONFIG_SYS_INIT_SP_ADDR		(0x40001000 - GENERATED_GBL_DATA_SIZE)
-
-/*
- * NOR FLASH organization
- * Now uses the standard CFI interface
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_SYS_MONITOR_BASE		0x0
-/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* 512 * 4096 sectors, or 32 * 64k blocks */
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-#define CONFIG_FLASH_SHOW_PROGRESS  1
-
-/*
- * Config for NOR flash
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_MY_ENV_OFFSET	0x40000
-/* addr of environment */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_MY_ENV_OFFSET)
-/* 16k Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE		0x4000
-
-/* ATAG configuration */
-#define CONFIG_INITRD_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-#endif	/* __CONFIG_H */