/* * Copyright 2017 Chen-Yu Tsai * Copyright 2017 Icenowy Zheng * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include #include #include / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; clocks { #address-cells = <1>; #size-cells = <1>; ranges; osc24M: osc24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; osc32k: osc32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; }; }; soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; reg = <0x01c00030 0x0c>; interrupts = ; }; mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; pinctrl-0 = <&mmc0_pins>; pinctrl-names = "default"; interrupts = ; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc1: mmc@1c10000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc2: mmc@1c11000 { compatible = "allwinner,sun8i-r40-emmc", "allwinner,sun50i-a64-emmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; pinctrl-0 = <&mmc2_pins>; pinctrl-names = "default"; interrupts = ; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc3: mmc@1c12000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>; clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC3>; reset-names = "ahb"; interrupts = ; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; drive-strength = <30>; bias-pull-up; }; mmc1_pg_pins: mmc1-pg-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; drive-strength = <30>; bias-pull-up; }; mmc2_pins: mmc2-pins { pins = "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; }; uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART5>; resets = <&ccu RST_BUS_UART5>; status = "disabled"; }; uart6: serial@1c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART6>; resets = <&ccu RST_BUS_UART6>; status = "disabled"; }; uart7: serial@1c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART7>; resets = <&ccu RST_BUS_UART7>; status = "disabled"; }; i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c3: i2c@1c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; i2c4: i2c@1c2c000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2c000 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; interrupts = ; }; }; timer { compatible = "arm,armv7-timer"; interrupts = , , , ; }; };