From df666b9c510fd27fd3b1afd9ddfa1eaa62ce12b3 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 22 Feb 2006 21:23:35 +0000 Subject: [ARM] 3325/2: GPIO function to control multi-drive (open collector) capability Patch from Andrew Victor This patch adds the at91_set_multi_drive() function to enable/disable the multi-drive (open collector) pin capability on the AT91RM9200 processor. This is necessary to fix the UDC (USB Gadget) driver for the AT91RM9200 board as it will not allow the board reset line to be pulled low if the pullup is not driven as an open collector output as the boards are wired to the USB connector on both the DK/EK. This version of the patch updates it to 2.6.16-rc4. Orignal patch by Jeff Warren. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91rm9200/gpio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-arm/arch-at91rm9200/gpio.h') diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index 0f0a61e2f129..6176ab2dc417 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -183,6 +183,7 @@ extern int at91_set_B_periph(unsigned pin, int use_pullup); extern int at91_set_gpio_input(unsigned pin, int use_pullup); extern int at91_set_gpio_output(unsigned pin, int value); extern int at91_set_deglitch(unsigned pin, int is_on); +extern int at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); -- cgit v1.2.1