From 1de3cd4fb49f3463679c49afe0aa9ceb133f3e49 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Wed, 8 Mar 2017 16:10:19 +0000 Subject: drm: hdlcd: Fix the calculation of the scanout start address The calculation of the framebuffer's start address was wrongly using the CRTC's x and y position rather than the one of the source framebuffer. To fix that we need to update the plane_check code to call drm_plane_helper_check_state() to clip the src and dst coordinates. While there so some minor cleanup of redundant freeing of devm_alloc-ated memory. Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/hdlcd_crtc.c | 47 ++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c index 20ebfb4fbdfa..c65116348281 100644 --- a/drivers/gpu/drm/arm/hdlcd_crtc.c +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include @@ -206,16 +207,33 @@ static const struct drm_crtc_helper_funcs hdlcd_crtc_helper_funcs = { static int hdlcd_plane_atomic_check(struct drm_plane *plane, struct drm_plane_state *state) { - u32 src_w, src_h; + struct drm_rect clip = { 0 }; + struct drm_crtc_state *crtc_state; + u32 src_h = state->src_h >> 16; - src_w = state->src_w >> 16; - src_h = state->src_h >> 16; + /* only the HDLCD_REG_FB_LINE_COUNT register has a limit */ + if (src_h >= HDLCD_MAX_YRES) { + DRM_DEBUG_KMS("Invalid source width: %d\n", src_h); + return -EINVAL; + } + + if (!state->fb || !state->crtc) + return 0; - /* we can't do any scaling of the plane source */ - if ((src_w != state->crtc_w) || (src_h != state->crtc_h)) + crtc_state = drm_atomic_get_existing_crtc_state(state->state, + state->crtc); + if (!crtc_state) { + DRM_DEBUG_KMS("Invalid crtc state\n"); return -EINVAL; + } - return 0; + clip.x2 = crtc_state->adjusted_mode.hdisplay; + clip.y2 = crtc_state->adjusted_mode.vdisplay; + + return drm_plane_helper_check_state(state, &clip, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + false, true); } static void hdlcd_plane_atomic_update(struct drm_plane *plane, @@ -224,21 +242,20 @@ static void hdlcd_plane_atomic_update(struct drm_plane *plane, struct drm_framebuffer *fb = plane->state->fb; struct hdlcd_drm_private *hdlcd; struct drm_gem_cma_object *gem; - u32 src_w, src_h, dest_w, dest_h; + u32 src_x, src_y, dest_h; dma_addr_t scanout_start; if (!fb) return; - src_w = plane->state->src_w >> 16; - src_h = plane->state->src_h >> 16; - dest_w = plane->state->crtc_w; - dest_h = plane->state->crtc_h; + src_x = plane->state->src.x1 >> 16; + src_y = plane->state->src.y1 >> 16; + dest_h = drm_rect_height(&plane->state->dst); gem = drm_fb_cma_get_gem_obj(fb, 0); + scanout_start = gem->paddr + fb->offsets[0] + - plane->state->crtc_y * fb->pitches[0] + - plane->state->crtc_x * - fb->format->cpp[0]; + src_y * fb->pitches[0] + + src_x * fb->format->cpp[0]; hdlcd = plane->dev->dev_private; hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_LENGTH, fb->pitches[0]); @@ -285,7 +302,6 @@ static struct drm_plane *hdlcd_plane_init(struct drm_device *drm) formats, ARRAY_SIZE(formats), DRM_PLANE_TYPE_PRIMARY, NULL); if (ret) { - devm_kfree(drm->dev, plane); return ERR_PTR(ret); } @@ -309,7 +325,6 @@ int hdlcd_setup_crtc(struct drm_device *drm) &hdlcd_crtc_funcs, NULL); if (ret) { hdlcd_plane_destroy(primary); - devm_kfree(drm->dev, primary); return ret; } -- cgit v1.2.1 From eb77e6b80f3bed262c7773236f0fb84649fd3091 Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Thu, 27 Apr 2017 12:11:54 -0500 Subject: EDAC, amd64: Fix reporting of Chip Select sizes on Fam17h The wrong index into the csbases/csmasks arrays was being passed to the function to compute the chip select sizes, which resulted in the wrong size being computed. Address that so that the correct values are computed and printed. Also, redo how we calculate the number of pages in a CS row. Reported-by: Benjamin Bennett Signed-off-by: Yazen Ghannam Cc: # 4.10.x Cc: linux-edac Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com [ Remove unneeded integer math comment, minor cleanups. ] Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 40 +++++++++++++++++++--------------------- 1 file changed, 19 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 82dab1692264..3aea55698165 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -782,24 +782,26 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan) static void debug_display_dimm_sizes_df(struct amd64_pvt *pvt, u8 ctrl) { - u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases; - int dimm, size0, size1; + int dimm, size0, size1, cs0, cs1; edac_printk(KERN_DEBUG, EDAC_MC, "UMC%d chip selects:\n", ctrl); for (dimm = 0; dimm < 4; dimm++) { size0 = 0; + cs0 = dimm * 2; - if (dcsb[dimm*2] & DCSB_CS_ENABLE) - size0 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, dimm); + if (csrow_enabled(cs0, ctrl, pvt)) + size0 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, cs0); size1 = 0; - if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE) - size1 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, dimm); + cs1 = dimm * 2 + 1; + + if (csrow_enabled(cs1, ctrl, pvt)) + size1 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, cs1); amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n", - dimm * 2, size0, - dimm * 2 + 1, size1); + cs0, size0, + cs1, size1); } } @@ -2756,26 +2758,22 @@ skip: * encompasses * */ -static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr) +static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig) { - u32 cs_mode, nr_pages; u32 dbam = dct ? pvt->dbam1 : pvt->dbam0; + int csrow_nr = csrow_nr_orig; + u32 cs_mode, nr_pages; + if (!pvt->umc) + csrow_nr >>= 1; - /* - * The math on this doesn't look right on the surface because x/2*4 can - * be simplified to x*2 but this expression makes use of the fact that - * it is integral math where 1/2=0. This intermediate value becomes the - * number of bits to shift the DBAM register to extract the proper CSROW - * field. - */ - cs_mode = DBAM_DIMM(csrow_nr / 2, dbam); + cs_mode = DBAM_DIMM(csrow_nr, dbam); - nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, (csrow_nr / 2)) - << (20 - PAGE_SHIFT); + nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, csrow_nr); + nr_pages <<= 20 - PAGE_SHIFT; edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n", - csrow_nr, dct, cs_mode); + csrow_nr_orig, dct, cs_mode); edac_dbg(0, "nr_pages/channel: %u\n", nr_pages); return nr_pages; -- cgit v1.2.1 From 3d05f3aed5d721c2c77d20288c29ab26c6193ed5 Mon Sep 17 00:00:00 2001 From: Julia Cartwright Date: Fri, 28 Apr 2017 12:41:02 -0500 Subject: md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock On mainline, there is no functional difference, just less code, and symmetric lock/unlock paths. On PREEMPT_RT builds, this fixes the following warning, seen by Alexander GQ Gerasiov, due to the sleeping nature of spinlocks. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993 in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1 CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G W 4.9.20-rt16-stand6-686 #1 Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: dump_stack+0x47/0x68 ? migrate_enable+0x4a/0xf0 ___might_sleep+0x101/0x180 rt_spin_lock+0x17/0x40 add_stripe_bio+0x4e3/0x6c0 [raid456] ? preempt_count_add+0x42/0xb0 raid5_make_request+0x737/0xdd0 [raid456] Reported-by: Alexander GQ Gerasiov Tested-by: Alexander GQ Gerasiov Signed-off-by: Julia Cartwright Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 2e38cfac5b1d..3809a2192132 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -103,8 +103,7 @@ static inline void unlock_device_hash_lock(struct r5conf *conf, int hash) static inline void lock_all_device_hash_locks_irq(struct r5conf *conf) { int i; - local_irq_disable(); - spin_lock(conf->hash_locks); + spin_lock_irq(conf->hash_locks); for (i = 1; i < NR_STRIPE_HASH_LOCKS; i++) spin_lock_nest_lock(conf->hash_locks + i, conf->hash_locks); spin_lock(&conf->device_lock); @@ -114,9 +113,9 @@ static inline void unlock_all_device_hash_locks_irq(struct r5conf *conf) { int i; spin_unlock(&conf->device_lock); - for (i = NR_STRIPE_HASH_LOCKS; i; i--) - spin_unlock(conf->hash_locks + i - 1); - local_irq_enable(); + for (i = NR_STRIPE_HASH_LOCKS - 1; i; i--) + spin_unlock(conf->hash_locks + i); + spin_unlock_irq(conf->hash_locks); } /* Find first data disk in a raid6 stripe */ @@ -714,12 +713,11 @@ static bool is_full_stripe_write(struct stripe_head *sh) static void lock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2) { - local_irq_disable(); if (sh1 > sh2) { - spin_lock(&sh2->stripe_lock); + spin_lock_irq(&sh2->stripe_lock); spin_lock_nested(&sh1->stripe_lock, 1); } else { - spin_lock(&sh1->stripe_lock); + spin_lock_irq(&sh1->stripe_lock); spin_lock_nested(&sh2->stripe_lock, 1); } } @@ -727,8 +725,7 @@ static void lock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2) static void unlock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2) { spin_unlock(&sh1->stripe_lock); - spin_unlock(&sh2->stripe_lock); - local_irq_enable(); + spin_unlock_irq(&sh2->stripe_lock); } /* Only freshly new full stripe normal write stripe can be added to a batch list */ -- cgit v1.2.1 From 7f48d0b48cba2ddc03d09353ba4ef6ae680da520 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 25 Apr 2017 10:05:12 +0100 Subject: drm/i915/gvt: fix typo: "supporte" -> "support" trivial fix to typo in WARN_ONCE message Signed-off-by: Colin Ian King Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 6da9ae1618e3..31624f1df893 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1240,7 +1240,7 @@ static int dma_ctrl_write(struct intel_vgpu *vgpu, unsigned int offset, mode = vgpu_vreg(vgpu, offset); if (GFX_MODE_BIT_SET_IN_MASK(mode, START_DMA)) { - WARN_ONCE(1, "VM(%d): iGVT-g doesn't supporte GuC\n", + WARN_ONCE(1, "VM(%d): iGVT-g doesn't support GuC\n", vgpu->id); return 0; } -- cgit v1.2.1 From 657314b7a5d16961e7e0ecdae4a59d28123e74c0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 28 Apr 2017 17:30:52 +0200 Subject: drm/etnaviv: don't put fence in case of submit failure If we bail out of the submit before actually adding the cmdstream to the kernel ring there is no valid fence to put. Make sure to skip the fence_put in that case. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c index e1909429837e..de80ee1b71df 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c @@ -44,6 +44,7 @@ static struct etnaviv_gem_submit *submit_create(struct drm_device *dev, /* initially, until copy_from_user() and bo lookup succeeds: */ submit->nr_bos = 0; + submit->fence = NULL; ww_acquire_init(&submit->ticket, &reservation_ww_class); } @@ -294,7 +295,8 @@ static void submit_cleanup(struct etnaviv_gem_submit *submit) } ww_acquire_fini(&submit->ticket); - dma_fence_put(submit->fence); + if (submit->fence) + dma_fence_put(submit->fence); kfree(submit); } -- cgit v1.2.1 From 2345ab1df8a9aa3cdca942142b48eb141faeb1c3 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Mon, 8 May 2017 09:27:39 +0800 Subject: drm/i915/gvt: not to restore in-context mmio Needn't to restore the in-context MMIO when SCHEDULE_OUT. Sometimes with restoring the in-context MMIO, some GPU hang can be observed. So remove the in-context MMIO restore Signed-off-by: Chuanxiao Dong Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/render.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/render.c b/drivers/gpu/drm/i915/gvt/render.c index 0beb83563b08..05b75b9f852a 100644 --- a/drivers/gpu/drm/i915/gvt/render.c +++ b/drivers/gpu/drm/i915/gvt/render.c @@ -333,6 +333,9 @@ void intel_gvt_restore_render_mmio(struct intel_vgpu *vgpu, int ring_id) } else v = mmio->value; + if (mmio->in_context) + continue; + I915_WRITE(mmio->reg, v); POSTING_READ(mmio->reg); -- cgit v1.2.1 From 2214c260c72b0bd94e6c1c19bf451686212025d3 Mon Sep 17 00:00:00 2001 From: Artur Paszkiewicz Date: Mon, 8 May 2017 11:56:55 +0200 Subject: md: don't return -EAGAIN in md_allow_write for external metadata arrays This essentially reverts commit b5470dc5fc18 ("md: resolve external metadata handling deadlock in md_allow_write") with some adjustments. Since commit 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.") changing array_state to 'active' does not use mddev_lock() and will not cause a deadlock with md_allow_write(). This revert simplifies userspace tools that write to sysfs attributes like "stripe_cache_size" or "consistency_policy" because it removes the need for special handling for external metadata arrays, checking for EAGAIN and retrying the write. Signed-off-by: Artur Paszkiewicz Signed-off-by: Shaohua Li --- drivers/md/md.c | 20 ++++++++------------ drivers/md/md.h | 2 +- drivers/md/raid1.c | 9 +++------ drivers/md/raid5.c | 12 +++--------- 4 files changed, 15 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 82f798be964f..10367ffe92e3 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8022,18 +8022,15 @@ EXPORT_SYMBOL(md_write_end); * may proceed without blocking. It is important to call this before * attempting a GFP_KERNEL allocation while holding the mddev lock. * Must be called with mddev_lock held. - * - * In the ->external case MD_SB_CHANGE_PENDING can not be cleared until mddev->lock - * is dropped, so return -EAGAIN after notifying userspace. */ -int md_allow_write(struct mddev *mddev) +void md_allow_write(struct mddev *mddev) { if (!mddev->pers) - return 0; + return; if (mddev->ro) - return 0; + return; if (!mddev->pers->sync_request) - return 0; + return; spin_lock(&mddev->lock); if (mddev->in_sync) { @@ -8046,13 +8043,12 @@ int md_allow_write(struct mddev *mddev) spin_unlock(&mddev->lock); md_update_sb(mddev, 0); sysfs_notify_dirent_safe(mddev->sysfs_state); + /* wait for the dirty state to be recorded in the metadata */ + wait_event(mddev->sb_wait, + !test_bit(MD_SB_CHANGE_CLEAN, &mddev->sb_flags) && + !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)); } else spin_unlock(&mddev->lock); - - if (test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) - return -EAGAIN; - else - return 0; } EXPORT_SYMBOL_GPL(md_allow_write); diff --git a/drivers/md/md.h b/drivers/md/md.h index 4e75d121bfcc..11f15146ce51 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -665,7 +665,7 @@ extern int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, bool metadata_op); extern void md_do_sync(struct md_thread *thread); extern void md_new_event(struct mddev *mddev); -extern int md_allow_write(struct mddev *mddev); +extern void md_allow_write(struct mddev *mddev); extern void md_wait_for_blocked_rdev(struct md_rdev *rdev, struct mddev *mddev); extern void md_set_array_sectors(struct mddev *mddev, sector_t array_sectors); extern int md_check_no_bitmap(struct mddev *mddev); diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 7ed59351fe97..7c1f73398800 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -3197,7 +3197,7 @@ static int raid1_reshape(struct mddev *mddev) struct r1conf *conf = mddev->private; int cnt, raid_disks; unsigned long flags; - int d, d2, err; + int d, d2; /* Cannot change chunk_size, layout, or level */ if (mddev->chunk_sectors != mddev->new_chunk_sectors || @@ -3209,11 +3209,8 @@ static int raid1_reshape(struct mddev *mddev) return -EINVAL; } - if (!mddev_is_clustered(mddev)) { - err = md_allow_write(mddev); - if (err) - return err; - } + if (!mddev_is_clustered(mddev)) + md_allow_write(mddev); raid_disks = mddev->raid_disks + mddev->delta_disks; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3809a2192132..f8055a7abb4b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2309,14 +2309,12 @@ static int resize_stripes(struct r5conf *conf, int newsize) struct stripe_head *osh, *nsh; LIST_HEAD(newstripes); struct disk_info *ndisks; - int err; + int err = 0; struct kmem_cache *sc; int i; int hash, cnt; - err = md_allow_write(conf->mddev); - if (err) - return err; + md_allow_write(conf->mddev); /* Step 1 */ sc = kmem_cache_create(conf->cache_name[1-conf->active_name], @@ -6310,7 +6308,6 @@ int raid5_set_cache_size(struct mddev *mddev, int size) { struct r5conf *conf = mddev->private; - int err; if (size <= 16 || size > 32768) return -EINVAL; @@ -6322,10 +6319,7 @@ raid5_set_cache_size(struct mddev *mddev, int size) ; mutex_unlock(&conf->cache_size_mutex); - - err = md_allow_write(mddev); - if (err) - return err; + md_allow_write(mddev); mutex_lock(&conf->cache_size_mutex); while (size > conf->max_nr_stripes) -- cgit v1.2.1 From c1061255031dea76ee9e082d081b88ac6d6c8265 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Thu, 27 Apr 2017 16:25:03 +0200 Subject: scsi: libfc: do not flood console with messages 'libfc: queue full ...' When the FCoE sending side becomes congested libfc tries to reduce the queue depth on the host; however due to the built-in lag before attempting to ramp down the queue depth _again_ the message log is flooded with the following message: libfc: queue full, reducing can_queue to 512 With this patch the message is printed only once (ie when it's actually changed). Signed-off-by: Hannes Reinecke Reviewed-by: Bart Van Assche Acked-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/libfc/fc_fcp.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index a808e8ef1d08..234352da5c3c 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -407,11 +407,12 @@ unlock: * can_queue. Eventually we will hit the point where we run * on all reserved structs. */ -static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport) +static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport) { struct fc_fcp_internal *si = fc_get_scsi_internal(lport); unsigned long flags; int can_queue; + bool changed = false; spin_lock_irqsave(lport->host->host_lock, flags); @@ -427,9 +428,11 @@ static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport) if (!can_queue) can_queue = 1; lport->host->can_queue = can_queue; + changed = true; unlock: spin_unlock_irqrestore(lport->host->host_lock, flags); + return changed; } /* @@ -1896,11 +1899,11 @@ int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd) if (!fc_fcp_lport_queue_ready(lport)) { if (lport->qfull) { - fc_fcp_can_queue_ramp_down(lport); - shost_printk(KERN_ERR, lport->host, - "libfc: queue full, " - "reducing can_queue to %d.\n", - lport->host->can_queue); + if (fc_fcp_can_queue_ramp_down(lport)) + shost_printk(KERN_ERR, lport->host, + "libfc: queue full, " + "reducing can_queue to %d.\n", + lport->host->can_queue); } rc = SCSI_MLQUEUE_HOST_BUSY; goto out; -- cgit v1.2.1 From 4492b739c9ccfaf828bd7c02dc779ec2a5e55ff4 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 27 Apr 2017 15:08:26 -0700 Subject: scsi: lpfc: Fix panic on BFS configuration To select the appropriate shost template, the driver is issuing a mailbox command to retrieve the wwn. Turns out the sending of the command precedes the reset of the function. On SLI-4 adapters, this is inconsequential as the mailbox command location is specified by dma via the BMBX register. However, on SLI-3 adapters, the location of the mailbox command submission area changes. When the function is first powered on or reset, the cmd is submitted via PCI bar memory. Later the driver changes the function config to use host memory and DMA. The request to start a mailbox command is the same, a simple doorbell write, regardless of submission area. So.. if there has not been a boot driver run against the adapter, the mailbox command works as defaults are ok. But, if the boot driver has configured the card and, and if no platform pci function/slot reset occurs as the os starts, the mailbox command will fail. The SLI-3 device will use the stale boot driver dma location. This can cause PCI eeh errors. Fix is to reset the sli-3 function before sending the mailbox command, thus synchronizing the function/driver on mailbox location. Note: The fix uses routines that are typically invoked later in the call flow to reset the sli-3 device. The issue in using those routines is that the normal (non-fix) flow does additional initialization, namely the allocation of the pport structure. So, rather than significantly reworking the initialization flow so that the pport is alloc'd first, pointer checks are added to work around it. Checks are limited to the routines invoked by a sli-3 adapter (s3 routines) as this fix/early call is only invoked on a sli3 adapter. Nothing changes post the fix. Subsequent initialization, and another adapter reset, still occur - both on sli-3 and sli-4 adapters. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Fixes: 96418b5e2c88 ("scsi: lpfc: Fix eh_deadline setting for sli3 adapters.") Cc: stable@vger.kernel.org # v4.11+ Reviewed-by: Ewan D. Milne Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_init.c | 7 +++++++ drivers/scsi/lpfc/lpfc_sli.c | 19 ++++++++++++------- 3 files changed, 20 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 944b32ca4931..1c55408ac718 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -294,6 +294,7 @@ int lpfc_selective_reset(struct lpfc_hba *); void lpfc_reset_barrier(struct lpfc_hba *); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); int lpfc_sli_brdkill(struct lpfc_hba *); +int lpfc_sli_chipset_init(struct lpfc_hba *phba); int lpfc_sli_brdreset(struct lpfc_hba *); int lpfc_sli_brdrestart(struct lpfc_hba *); int lpfc_sli_hba_setup(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 90ae354a9c45..e85f273e34ac 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3602,6 +3602,13 @@ lpfc_get_wwpn(struct lpfc_hba *phba) LPFC_MBOXQ_t *mboxq; MAILBOX_t *mb; + if (phba->sli_rev < LPFC_SLI_REV4) { + /* Reset the port first */ + lpfc_sli_brdrestart(phba); + rc = lpfc_sli_chipset_init(phba); + if (rc) + return (uint64_t)-1; + } mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index cf19f4976f5f..2a4fc00dfa9b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4204,13 +4204,16 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) /* Reset HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "0325 Reset HBA Data: x%x x%x\n", - phba->pport->port_state, psli->sli_flag); + (phba->pport) ? phba->pport->port_state : 0, + psli->sli_flag); /* perform board reset */ phba->fc_eventTag = 0; phba->link_events = 0; - phba->pport->fc_myDID = 0; - phba->pport->fc_prevDID = 0; + if (phba->pport) { + phba->pport->fc_myDID = 0; + phba->pport->fc_prevDID = 0; + } /* Turn off parity checking and serr during the physical reset */ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value); @@ -4336,7 +4339,8 @@ lpfc_sli_brdrestart_s3(struct lpfc_hba *phba) /* Restart HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "0337 Restart HBA Data: x%x x%x\n", - phba->pport->port_state, psli->sli_flag); + (phba->pport) ? phba->pport->port_state : 0, + psli->sli_flag); word0 = 0; mb = (MAILBOX_t *) &word0; @@ -4350,7 +4354,7 @@ lpfc_sli_brdrestart_s3(struct lpfc_hba *phba) readl(to_slim); /* flush */ /* Only skip post after fc_ffinit is completed */ - if (phba->pport->port_state) + if (phba->pport && phba->pport->port_state) word0 = 1; /* This is really setting up word1 */ else word0 = 0; /* This is really setting up word1 */ @@ -4359,7 +4363,8 @@ lpfc_sli_brdrestart_s3(struct lpfc_hba *phba) readl(to_slim); /* flush */ lpfc_sli_brdreset(phba); - phba->pport->stopped = 0; + if (phba->pport) + phba->pport->stopped = 0; phba->link_state = LPFC_INIT_START; phba->hba_flag = 0; spin_unlock_irq(&phba->hbalock); @@ -4446,7 +4451,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba) * iteration, the function will restart the HBA again. The function returns * zero if HBA successfully restarted else returns negative error code. **/ -static int +int lpfc_sli_chipset_init(struct lpfc_hba *phba) { uint32_t status, i = 0; -- cgit v1.2.1 From 4ff7adc8c7886bcf6e48f09c49d3f339f33d7e79 Mon Sep 17 00:00:00 2001 From: Zhou Zhengping Date: Fri, 28 Apr 2017 17:43:04 +0800 Subject: scsi: Skip deleted devices in __scsi_device_lookup When a device is unplugged from a SCSI controller, if the scsi_device is still in use by application layer, it won't get released until users close it. In this case, scsi_device_remove just set the scsi_device's state to be SDEV_DEL. But if you plug the disk just before the old scsi_device is released, then there will be two scsi_device structures in scsi_host->__devices. When the next unplug event happens, some low-level drivers will check whether the scsi_device has been added to host (for example the MegaRAID SAS series controller) by calling scsi_device_lookup(call __scsi_device_lookup) in function megasas_aen_polling. __scsi_device_lookup will return the first scsi_device. Because its state is SDEV_DEL, the scsi_device_lookup will return NULL, making the low-level driver assume that the scsi_device has been removed, and won't call scsi_device_remove which will lead to hot swap failure. Signed-off-by: Zhou Zhengping Tested-by: Zeng Rujia Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195607 Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 7bfbcfa7af40..61cdd99ae41e 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -763,6 +763,8 @@ struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost, struct scsi_device *sdev; list_for_each_entry(sdev, &shost->__devices, siblings) { + if (sdev->sdev_state == SDEV_DEL) + continue; if (sdev->channel == channel && sdev->id == id && sdev->lun ==lun) return sdev; -- cgit v1.2.1 From 7aa686d35598cbe58b3f7ce32e4ec17649190f3d Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 2 May 2017 10:45:03 -0700 Subject: scsi: scsi_lib: Add #include This patch avoids that when building with W=1 the compiler complains that __scsi_init_queue() has not been declared. See also commit d48777a633d6 ("scsi: remove __scsi_alloc_queue"). Signed-off-by: Bart Van Assche Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 814a4bd8405d..e31f1cc90b81 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -30,6 +30,7 @@ #include #include #include +#include /* __scsi_init_queue() */ #include #include -- cgit v1.2.1 From 87ea6bdd8da88842a8247921f58ca495b4da79ef Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 3 May 2017 14:17:55 -0500 Subject: scsi: qedf: properly update arguments position in function call Properly update the position of the arguments in function call. Addresses-Coverity-ID: 1402010 Signed-off-by: Gustavo A. R. Silva Acked-by: Chad Dupuis Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_els.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qedf/qedf_els.c b/drivers/scsi/qedf/qedf_els.c index c505d41f6dc8..90627033bde6 100644 --- a/drivers/scsi/qedf/qedf_els.c +++ b/drivers/scsi/qedf/qedf_els.c @@ -109,7 +109,7 @@ retry_els: did = fcport->rdata->ids.port_id; sid = fcport->sid; - __fc_fill_fc_hdr(fc_hdr, FC_RCTL_ELS_REQ, sid, did, + __fc_fill_fc_hdr(fc_hdr, FC_RCTL_ELS_REQ, did, sid, FC_TYPE_ELS, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); -- cgit v1.2.1 From 0d618cf4f24cebb822eaf57c27985266e4110176 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 4 May 2017 00:22:16 +0300 Subject: scsi: lpfc: double lock typo in lpfc_ns_rsp() There is a double lock bug here so this will deadlock instead of unlocking. Fixes: 1c5b12f76301 ("Fix implicit logo and RSCN handling for NVMET") Signed-off-by: Dan Carpenter Reviewed-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_ct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 1487406aea77..c7962dae4dab 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -630,7 +630,7 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint8_t fc4_type, NLP_EVT_DEVICE_RECOVERY); spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NVMET_RECOV; - spin_lock_irq(shost->host_lock); + spin_unlock_irq(shost->host_lock); } } -- cgit v1.2.1 From 0d2fc3b48ba0e267962c861c5258564c335dd1f2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 4 May 2017 00:23:57 +0300 Subject: scsi: qedf: Cleanup the type of io_log->op We store sc_cmd->cmnd[0] which is an unsigned char in io_log->op so this should also be unsigned char. The other thing is that this is displayed in the debugfs: seq_printf(s, "0x%02x:", io_log->op); Smatch complains that the formatting won't work for negative values so changing it to unsigned silences that warning as well. Signed-off-by: Dan Carpenter Acked-by: Chad Dupuis Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h index 40aeb6bb96a2..07ee88200e91 100644 --- a/drivers/scsi/qedf/qedf.h +++ b/drivers/scsi/qedf/qedf.h @@ -259,7 +259,7 @@ struct qedf_io_log { uint16_t task_id; uint32_t port_id; /* Remote port fabric ID */ int lun; - char op; /* SCSI CDB */ + unsigned char op; /* SCSI CDB */ uint8_t lba[4]; unsigned int bufflen; /* SCSI buffer length */ unsigned int sg_count; /* Number of SG elements */ -- cgit v1.2.1 From cd22874fec8fbecd4999b55e67baf3d71775f6f3 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 5 May 2017 15:42:55 -0700 Subject: scsi: qedf: Avoid reading past end of buffer Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay Signed-off-by: Kees Cook Acked-by: Chad Dupuis Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index cceddd995a4b..a5c97342fd5d 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -2895,7 +2895,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER; slowpath_params.drv_rev = QEDF_DRIVER_REV_VER; slowpath_params.drv_eng = QEDF_DRIVER_ENG_VER; - memcpy(slowpath_params.name, "qedf", QED_DRV_VER_STR_SIZE); + strncpy(slowpath_params.name, "qedf", QED_DRV_VER_STR_SIZE); rc = qed_ops->common->slowpath_start(qedf->cdev, &slowpath_params); if (rc) { QEDF_ERR(&(qedf->dbg_ctx), "Cannot start slowpath.\n"); -- cgit v1.2.1 From 07cc1ccfb84320582c9ac389a21cd81df82bc123 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 5 May 2017 16:31:47 -0700 Subject: scsi: cxlflash: Select IRQ_POLL The driver now uses IRQ_POLL and needs to select it to avoid the following build error. ERROR: ".irq_poll_complete" [drivers/scsi/cxlflash/cxlflash.ko] undefined! ERROR: ".irq_poll_sched" [drivers/scsi/cxlflash/cxlflash.ko] undefined! ERROR: ".irq_poll_disable" [drivers/scsi/cxlflash/cxlflash.ko] undefined! ERROR: ".irq_poll_init" [drivers/scsi/cxlflash/cxlflash.ko] undefined! Fixes: cba06e6de403 ("scsi: cxlflash: Implement IRQ polling for RRQ processing") Signed-off-by: Guenter Roeck Acked-by: Matthew R. Ochs Signed-off-by: Martin K. Petersen --- drivers/scsi/cxlflash/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/cxlflash/Kconfig b/drivers/scsi/cxlflash/Kconfig index c052104e523e..a011c5dbf214 100644 --- a/drivers/scsi/cxlflash/Kconfig +++ b/drivers/scsi/cxlflash/Kconfig @@ -5,6 +5,7 @@ config CXLFLASH tristate "Support for IBM CAPI Flash" depends on PCI && SCSI && CXL && EEH + select IRQ_POLL default m help Allows CAPI Accelerated IO to Flash -- cgit v1.2.1 From 019c0d66f66a8612bb867caf05e865a4766238a4 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 6 May 2017 23:13:55 +0100 Subject: scsi: lpfc: ensure els_wq is being checked before destroying it I believe there is a typo on the wq destroy of els_wq, currently the driver is checking if els_cq is not null and I think this should be a check on els_wq instead. Detected by CoverityScan, CID#1411629 ("Copy-paste error") Signed-off-by: Colin Ian King Acked-by: Dick Kennedy Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e85f273e34ac..4b1eb98c228d 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8854,7 +8854,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) lpfc_wq_destroy(phba, phba->sli4_hba.nvmels_wq); /* Unset ELS work queue */ - if (phba->sli4_hba.els_cq) + if (phba->sli4_hba.els_wq) lpfc_wq_destroy(phba, phba->sli4_hba.els_wq); /* Unset unsolicited receive queue */ -- cgit v1.2.1 From b77b36cb7272ec5b9fb000e2ff18e947d9586a22 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 3 May 2017 17:29:01 +0100 Subject: scsi: pmcraid: remove redundant check to see if request_size is less than zero The 2nd check to see if request_size is less than zero is redundant because the first check takes error exit path on this condition. So, since it is redundant, remove it. Detected by CoverityScan, CID#146149 ("Logically Dead Code") Signed-off-by: Colin Ian King Reviewed-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen --- drivers/scsi/pmcraid.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index a4aadf5f4dc6..1cc814f1505a 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3770,9 +3770,6 @@ static long pmcraid_ioctl_passthrough( pmcraid_err("couldn't build passthrough ioadls\n"); goto out_free_cmd; } - } else if (request_size < 0) { - rc = -EINVAL; - goto out_free_cmd; } /* If data is being written into the device, copy the data from user -- cgit v1.2.1 From 29efc390b9462582ae95eb9a0b8cd17ab956afc0 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sun, 7 May 2017 17:36:24 -0700 Subject: md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown Acked-by: Coly Li Signed-off-by: Shaohua Li --- drivers/md/raid0.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 102 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 84e58596594d..d6c0bc76e837 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -385,7 +385,7 @@ static int raid0_run(struct mddev *mddev) blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors); blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors); blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors); - blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); + blk_queue_max_discard_sectors(mddev->queue, UINT_MAX); blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9); blk_queue_io_opt(mddev->queue, @@ -459,6 +459,95 @@ static inline int is_io_in_chunk_boundary(struct mddev *mddev, } } +static void raid0_handle_discard(struct mddev *mddev, struct bio *bio) +{ + struct r0conf *conf = mddev->private; + struct strip_zone *zone; + sector_t start = bio->bi_iter.bi_sector; + sector_t end; + unsigned int stripe_size; + sector_t first_stripe_index, last_stripe_index; + sector_t start_disk_offset; + unsigned int start_disk_index; + sector_t end_disk_offset; + unsigned int end_disk_index; + unsigned int disk; + + zone = find_zone(conf, &start); + + if (bio_end_sector(bio) > zone->zone_end) { + struct bio *split = bio_split(bio, + zone->zone_end - bio->bi_iter.bi_sector, GFP_NOIO, + mddev->bio_set); + bio_chain(split, bio); + generic_make_request(bio); + bio = split; + end = zone->zone_end; + } else + end = bio_end_sector(bio); + + if (zone != conf->strip_zone) + end = end - zone[-1].zone_end; + + /* Now start and end is the offset in zone */ + stripe_size = zone->nb_dev * mddev->chunk_sectors; + + first_stripe_index = start; + sector_div(first_stripe_index, stripe_size); + last_stripe_index = end; + sector_div(last_stripe_index, stripe_size); + + start_disk_index = (int)(start - first_stripe_index * stripe_size) / + mddev->chunk_sectors; + start_disk_offset = ((int)(start - first_stripe_index * stripe_size) % + mddev->chunk_sectors) + + first_stripe_index * mddev->chunk_sectors; + end_disk_index = (int)(end - last_stripe_index * stripe_size) / + mddev->chunk_sectors; + end_disk_offset = ((int)(end - last_stripe_index * stripe_size) % + mddev->chunk_sectors) + + last_stripe_index * mddev->chunk_sectors; + + for (disk = 0; disk < zone->nb_dev; disk++) { + sector_t dev_start, dev_end; + struct bio *discard_bio = NULL; + struct md_rdev *rdev; + + if (disk < start_disk_index) + dev_start = (first_stripe_index + 1) * + mddev->chunk_sectors; + else if (disk > start_disk_index) + dev_start = first_stripe_index * mddev->chunk_sectors; + else + dev_start = start_disk_offset; + + if (disk < end_disk_index) + dev_end = (last_stripe_index + 1) * mddev->chunk_sectors; + else if (disk > end_disk_index) + dev_end = last_stripe_index * mddev->chunk_sectors; + else + dev_end = end_disk_offset; + + if (dev_end <= dev_start) + continue; + + rdev = conf->devlist[(zone - conf->strip_zone) * + conf->strip_zone[0].nb_dev + disk]; + if (__blkdev_issue_discard(rdev->bdev, + dev_start + zone->dev_start + rdev->data_offset, + dev_end - dev_start, GFP_NOIO, 0, &discard_bio) || + !discard_bio) + continue; + bio_chain(discard_bio, bio); + if (mddev->gendisk) + trace_block_bio_remap(bdev_get_queue(rdev->bdev), + discard_bio, disk_devt(mddev->gendisk), + bio->bi_iter.bi_sector); + generic_make_request(discard_bio); + } + bio_endio(bio); +} + static void raid0_make_request(struct mddev *mddev, struct bio *bio) { struct strip_zone *zone; @@ -473,6 +562,11 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio) return; } + if (unlikely((bio_op(bio) == REQ_OP_DISCARD))) { + raid0_handle_discard(mddev, bio); + return; + } + bio_sector = bio->bi_iter.bi_sector; sector = bio_sector; chunk_sects = mddev->chunk_sectors; @@ -498,19 +592,13 @@ static void raid0_make_request(struct mddev *mddev, struct bio *bio) bio->bi_iter.bi_sector = sector + zone->dev_start + tmp_dev->data_offset; - if (unlikely((bio_op(bio) == REQ_OP_DISCARD) && - !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) { - /* Just ignore it */ - bio_endio(bio); - } else { - if (mddev->gendisk) - trace_block_bio_remap(bdev_get_queue(bio->bi_bdev), - bio, disk_devt(mddev->gendisk), - bio_sector); - mddev_check_writesame(mddev, bio); - mddev_check_write_zeroes(mddev, bio); - generic_make_request(bio); - } + if (mddev->gendisk) + trace_block_bio_remap(bdev_get_queue(bio->bi_bdev), + bio, disk_devt(mddev->gendisk), + bio_sector); + mddev_check_writesame(mddev, bio); + mddev_check_write_zeroes(mddev, bio); + generic_make_request(bio); } static void raid0_status(struct seq_file *seq, struct mddev *mddev) -- cgit v1.2.1 From 2685df6776b2c69967eaead48f694869f7dc91ca Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 4 May 2017 13:35:33 +0200 Subject: s390/ccwgroup: increase string buffer size Avoid false positive warnings like this with gcc 7.1: drivers/s390/cio/ccwgroup.c:41:21: warning: '%d' directive writing between 1 and 10 bytes into a region of size 4 sprintf(str, "cdev%d", i); and simply increase the size of the string buffer. Reviewed-by: Sebastian Ott Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index e443b0d0b236..34b9ad6b3143 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -35,7 +35,7 @@ static struct bus_type ccwgroup_bus_type; static void __ccwgroup_remove_symlinks(struct ccwgroup_device *gdev) { int i; - char str[8]; + char str[16]; for (i = 0; i < gdev->count; i++) { sprintf(str, "cdev%d", i); @@ -238,7 +238,7 @@ static void ccwgroup_release(struct device *dev) static int __ccwgroup_create_symlinks(struct ccwgroup_device *gdev) { - char str[8]; + char str[16]; int i, rc; for (i = 0; i < gdev->count; i++) { -- cgit v1.2.1 From 6423ef691c50568e56bb7e33a35bf9f8d6142d23 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 4 May 2017 13:39:18 +0200 Subject: s390/qdio: increase string buffer size Avoid false positive warnings like this with gcc 7.1: drivers/s390/cio/qdio_debug.h:63:4: note: 'snprintf' output between 8 and 17 bytes into a destination of size 16 snprintf(debug_buffer, QDIO_DBF_LEN, text); and simply increase the size of the string buffer. Reviewed-by: Sebastian Ott Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h index f33ce8577619..1d595d17bf11 100644 --- a/drivers/s390/cio/qdio_debug.h +++ b/drivers/s390/cio/qdio_debug.h @@ -11,7 +11,7 @@ #include "qdio.h" /* that gives us 15 characters in the text event views */ -#define QDIO_DBF_LEN 16 +#define QDIO_DBF_LEN 32 extern debug_info_t *qdio_dbf_setup; extern debug_info_t *qdio_dbf_error; -- cgit v1.2.1 From ae157902aea13926e9596d091cad6bd87b3be084 Mon Sep 17 00:00:00 2001 From: Ping Gao Date: Wed, 19 Apr 2017 14:02:31 +0800 Subject: drm/i915/gvt: avoid unnecessary vgpu switch It's no need to switch vgpu if next vgpu is the same with current vgpu, otherwise it will make performance drop in some case. v2: correct the comments. Signed-off-by: Ping Gao Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/sched_policy.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/sched_policy.c b/drivers/gpu/drm/i915/gvt/sched_policy.c index 34b9acdf3479..6ac77f8cc405 100644 --- a/drivers/gpu/drm/i915/gvt/sched_policy.c +++ b/drivers/gpu/drm/i915/gvt/sched_policy.c @@ -53,9 +53,13 @@ static void try_to_schedule_next_vgpu(struct intel_gvt *gvt) enum intel_engine_id i; struct intel_engine_cs *engine; - /* no target to schedule */ - if (!scheduler->next_vgpu) + /* no need to schedule if next_vgpu is the same with current_vgpu, + * let scheduler chose next_vgpu again by setting it to NULL. + */ + if (scheduler->next_vgpu == scheduler->current_vgpu) { + scheduler->next_vgpu = NULL; return; + } gvt_dbg_sched("try to schedule next vgpu %d\n", scheduler->next_vgpu->id); -- cgit v1.2.1 From bb3338d3474e0329918fda9dae2c52751731eb58 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Mon, 8 May 2017 17:39:24 -0700 Subject: md/raid5-cache: in r5l_do_submit_io(), submit io->split_bio first In r5l_do_submit_io(), it is necessary to check io->split_bio before submit io->current_bio. This is because, endio of current_bio may free the whole IO unit, and thus change io->split_bio. Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 26ba09282e7c..a6a62e212cd3 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -622,20 +622,30 @@ static void r5l_do_submit_io(struct r5l_log *log, struct r5l_io_unit *io) __r5l_set_io_unit_state(io, IO_UNIT_IO_START); spin_unlock_irqrestore(&log->io_list_lock, flags); + /* + * In case of journal device failures, submit_bio will get error + * and calls endio, then active stripes will continue write + * process. Therefore, it is not necessary to check Faulty bit + * of journal device here. + * + * We can't check split_bio after current_bio is submitted. If + * io->split_bio is null, after current_bio is submitted, current_bio + * might already be completed and the io_unit is freed. We submit + * split_bio first to avoid the issue. + */ + if (io->split_bio) { + if (io->has_flush) + io->split_bio->bi_opf |= REQ_PREFLUSH; + if (io->has_fua) + io->split_bio->bi_opf |= REQ_FUA; + submit_bio(io->split_bio); + } + if (io->has_flush) io->current_bio->bi_opf |= REQ_PREFLUSH; if (io->has_fua) io->current_bio->bi_opf |= REQ_FUA; submit_bio(io->current_bio); - - if (!io->split_bio) - return; - - if (io->has_flush) - io->split_bio->bi_opf |= REQ_PREFLUSH; - if (io->has_fua) - io->split_bio->bi_opf |= REQ_FUA; - submit_bio(io->split_bio); } /* deferred io_unit will be dispatched here */ -- cgit v1.2.1 From e84188852a7239d7a144af12f7e5dac8fa88600b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 May 2017 21:05:16 +0200 Subject: tee: add ARM_SMCCC dependency For the moment, the tee subsystem only makes sense in combination with the op-tee driver that depends on ARM_SMCCC, so let's hide the subsystem from users that can't select that. Suggested-by: Linus Torvalds Signed-off-by: Arnd Bergmann --- drivers/tee/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig index 2330a4eb4e8b..a6df12d88f90 100644 --- a/drivers/tee/Kconfig +++ b/drivers/tee/Kconfig @@ -1,6 +1,7 @@ # Generic Trusted Execution Environment Configuration config TEE tristate "Trusted Execution Environment support" + depends on HAVE_ARM_SMCCC || COMPILE_TEST select DMA_SHARED_BUFFER select GENERIC_ALLOCATOR help -- cgit v1.2.1 From df3ed932394488e57e72dd0e73c224d1804fdc8f Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 11 May 2017 10:15:10 -0500 Subject: Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code" A change to function pointers that was meant to address a sparse warning turned out to cause hundreds of new gcc-7 warnings: include/linux/of_irq.h:11:13: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] drivers/of/of_reserved_mem.c: In function '__reserved_mem_init_node': drivers/of/of_reserved_mem.c:200:7: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] int const (*initfn)(struct reserved_mem *rmem) = i->data; Turns out the sparse warnings were spurious and have been fixed in upstream sparse since 0.5.0 in commit "sparse: treat function pointers as pointers to const data". This partially reverts commit 17a70355ea576843a7ac851f1db26872a50b2850. Fixes: 17a70355ea57 ("of: fix sparse warnings in fdt, irq, reserved mem, and resolver code") Reported-by: Arnd Bergmann Signed-off-by: Rob Herring --- drivers/of/of_reserved_mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 4dec07ea510f..d507c3569a88 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -197,7 +197,7 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem) const struct of_device_id *i; for (i = __reservedmem_of_table; i < &__rmem_of_table_sentinel; i++) { - int const (*initfn)(struct reserved_mem *rmem) = i->data; + reservedmem_of_init_fn initfn = i->data; const char *compat = i->compatible; if (!of_flat_dt_is_compatible(rmem->fdt_node, compat)) -- cgit v1.2.1 From a00ebd1cf12c378a1d4f7a1d6daf1d76c1eaad82 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Thu, 11 May 2017 10:21:46 +0200 Subject: drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub() When killing kref_sub(), the unconditional additional kref_get() was not properly paired with the necessary kref_put(), causing a leak of struct drbd_requests (~ 224 Bytes) per submitted bio, and breaking DRBD in general, as the destructor of those "drbd_requests" does more than just the mempoll_free(). Fixes: bdfafc4ffdd2 ("locking/atomic, kref: Kill kref_sub()") Signed-off-by: Lars Ellenberg Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_req.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index b5730e17b455..656624314f0d 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -315,24 +315,32 @@ void drbd_req_complete(struct drbd_request *req, struct bio_and_error *m) } /* still holds resource->req_lock */ -static int drbd_req_put_completion_ref(struct drbd_request *req, struct bio_and_error *m, int put) +static void drbd_req_put_completion_ref(struct drbd_request *req, struct bio_and_error *m, int put) { struct drbd_device *device = req->device; D_ASSERT(device, m || (req->rq_state & RQ_POSTPONED)); + if (!put) + return; + if (!atomic_sub_and_test(put, &req->completion_ref)) - return 0; + return; drbd_req_complete(req, m); + /* local completion may still come in later, + * we need to keep the req object around. */ + if (req->rq_state & RQ_LOCAL_ABORTED) + return; + if (req->rq_state & RQ_POSTPONED) { /* don't destroy the req object just yet, * but queue it for retry */ drbd_restart_request(req); - return 0; + return; } - return 1; + kref_put(&req->kref, drbd_req_destroy); } static void set_if_null_req_next(struct drbd_peer_device *peer_device, struct drbd_request *req) @@ -519,12 +527,8 @@ static void mod_rq_state(struct drbd_request *req, struct bio_and_error *m, if (req->i.waiting) wake_up(&device->misc_wait); - if (c_put) { - if (drbd_req_put_completion_ref(req, m, c_put)) - kref_put(&req->kref, drbd_req_destroy); - } else { - kref_put(&req->kref, drbd_req_destroy); - } + drbd_req_put_completion_ref(req, m, c_put); + kref_put(&req->kref, drbd_req_destroy); } static void drbd_report_io_error(struct drbd_device *device, struct drbd_request *req) @@ -1366,8 +1370,7 @@ nodata: } out: - if (drbd_req_put_completion_ref(req, &m, 1)) - kref_put(&req->kref, drbd_req_destroy); + drbd_req_put_completion_ref(req, &m, 1); spin_unlock_irq(&resource->req_lock); /* Even though above is a kref_put(), this is safe. -- cgit v1.2.1 From 1a4a5bf52a4adb477adb075e5afce925824ad132 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Tue, 9 May 2017 18:27:33 +0800 Subject: driver: vrf: Fix one possible use-after-free issue The current codes only deal with the case that the skb is dropped, it may meet one use-after-free issue when NF_HOOK returns 0 that means the skb is stolen by one netfilter rule or hook. When one netfilter rule or hook stoles the skb and return NF_STOLEN, it means the skb is taken by the rule, and other modules should not touch this skb ever. Maybe the skb is queued or freed directly by the rule. Now uses the nf_hook instead of NF_HOOK to get the result of netfilter, and check the return value of nf_hook. Only when its value equals 1, it means the skb could go ahead. Or reset the skb as NULL. BTW, because vrf_rcv_finish is empty function, so needn't invoke it even though nf_hook returns 1. But we need to modify vrf_rcv_finish to deal with the NF_STOLEN case. There are two cases when skb is stolen. 1. The skb is stolen and freed directly. There is nothing we need to do, and vrf_rcv_finish isn't invoked. 2. The skb is queued and reinjected again. The vrf_rcv_finish would be invoked as okfn, so need to free the skb in it. Signed-off-by: Gao Feng Signed-off-by: David S. Miller --- drivers/net/vrf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index ceda5861da78..db882493875c 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -989,6 +989,7 @@ static u32 vrf_fib_table(const struct net_device *dev) static int vrf_rcv_finish(struct net *net, struct sock *sk, struct sk_buff *skb) { + kfree_skb(skb); return 0; } @@ -998,7 +999,7 @@ static struct sk_buff *vrf_rcv_nfhook(u8 pf, unsigned int hook, { struct net *net = dev_net(dev); - if (NF_HOOK(pf, hook, net, NULL, skb, dev, NULL, vrf_rcv_finish) < 0) + if (nf_hook(pf, hook, net, NULL, skb, dev, NULL, vrf_rcv_finish) != 1) skb = NULL; /* kfree_skb(skb) handled by nf code */ return skb; -- cgit v1.2.1 From 8d66c30b12ed3cb533696dea8b9a9eadd5da426a Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Tue, 9 May 2017 15:40:38 +0200 Subject: net: qca_spi: Fix alignment issues in rx path The qca_spi driver causes alignment issues on ARM devices. So fix this by using netdev_alloc_skb_ip_align(). Signed-off-by: Stefan Wahren Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 513e6c74e199..24ca7df15d07 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -296,8 +296,9 @@ qcaspi_receive(struct qcaspi *qca) /* Allocate rx SKB if we don't have one available. */ if (!qca->rx_skb) { - qca->rx_skb = netdev_alloc_skb(net_dev, - net_dev->mtu + VLAN_ETH_HLEN); + qca->rx_skb = netdev_alloc_skb_ip_align(net_dev, + net_dev->mtu + + VLAN_ETH_HLEN); if (!qca->rx_skb) { netdev_dbg(net_dev, "out of RX resources\n"); qca->stats.out_of_mem++; @@ -377,7 +378,7 @@ qcaspi_receive(struct qcaspi *qca) qca->rx_skb, qca->rx_skb->dev); qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY; netif_rx_ni(qca->rx_skb); - qca->rx_skb = netdev_alloc_skb(net_dev, + qca->rx_skb = netdev_alloc_skb_ip_align(net_dev, net_dev->mtu + VLAN_ETH_HLEN); if (!qca->rx_skb) { netdev_dbg(net_dev, "out of RX resources\n"); @@ -759,7 +760,8 @@ qcaspi_netdev_init(struct net_device *dev) if (!qca->rx_buffer) return -ENOBUFS; - qca->rx_skb = netdev_alloc_skb(dev, qca->net_dev->mtu + VLAN_ETH_HLEN); + qca->rx_skb = netdev_alloc_skb_ip_align(dev, qca->net_dev->mtu + + VLAN_ETH_HLEN); if (!qca->rx_skb) { kfree(qca->rx_buffer); netdev_info(qca->net_dev, "Failed to allocate RX sk_buff.\n"); -- cgit v1.2.1 From 0fe20fafd1791f993806d417048213ec57b81045 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 9 May 2017 17:19:42 +0100 Subject: netxen_nic: set rcode to the return status from the call to netxen_issue_cmd Currently rcode is being initialized to NX_RCODE_SUCCESS and later it is checked to see if it is not NX_RCODE_SUCCESS which is never true. It appears that there is an unintentional missing assignment of rcode from the return of the call to netxen_issue_cmd() that was dropped in an earlier fix, so add it in. Detected by CoverityScan, CID#401900 ("Logically dead code") Fixes: 2dcd5d95ad6b2 ("netxen_nic: fix cdrp race condition") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c index b8d5270359cd..e30676515529 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c @@ -247,7 +247,7 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu) cmd.req.arg3 = 0; if (recv_ctx->state == NX_HOST_CTX_STATE_ACTIVE) - netxen_issue_cmd(adapter, &cmd); + rcode = netxen_issue_cmd(adapter, &cmd); if (rcode != NX_RCODE_SUCCESS) return -EIO; -- cgit v1.2.1 From b60161668199ac62011c024adc9e66713b9554e7 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 10 May 2017 11:20:27 -0400 Subject: mdio: mux: Correct mdio_mux_init error path issues There is a potential unnecessary refcount decrement on error path of put_device(&pb->mii_bus->dev), as it is possible to avoid the of_mdio_find_bus() call if mux_bus is specified by the calling function. The same put_device() is not called in the error path if the devm_kzalloc of pb fails. This caused the variable used in the put_device() to be changed, as the pb pointer was obviously not set up. There is an unnecessary of_node_get() on child_bus_node if the of_mdiobus_register() is successful, as the for_each_available_child_of_node() automatically increments this. Thus the refcount on this node will always be +1 more than it should be. There is no of_node_put() on child_bus_node if the of_mdiobus_register() call fails. Finally, it is lacking devm_kfree() of pb in the error path. While this might not be technically necessary, it was present in other parts of the function. So, I am adding it where necessary to make it uniform. Signed-off-by: Jon Mason Fixes: f20e6657a875 ("mdio: mux: Enhanced MDIO mux framework for integrated multiplexers") Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 963838d4fac1..6943c5ece44a 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -122,10 +122,9 @@ int mdio_mux_init(struct device *dev, pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL); if (pb == NULL) { ret_val = -ENOMEM; - goto err_parent_bus; + goto err_pb_kz; } - pb->switch_data = data; pb->switch_fn = switch_fn; pb->current_child = -1; @@ -154,6 +153,7 @@ int mdio_mux_init(struct device *dev, cb->mii_bus = mdiobus_alloc(); if (!cb->mii_bus) { ret_val = -ENOMEM; + devm_kfree(dev, cb); of_node_put(child_bus_node); break; } @@ -169,8 +169,8 @@ int mdio_mux_init(struct device *dev, if (r) { mdiobus_free(cb->mii_bus); devm_kfree(dev, cb); + of_node_put(child_bus_node); } else { - of_node_get(child_bus_node); cb->next = pb->children; pb->children = cb; } @@ -181,9 +181,11 @@ int mdio_mux_init(struct device *dev, return 0; } + devm_kfree(dev, pb); +err_pb_kz: /* balance the reference of_mdio_find_bus() took */ - put_device(&pb->mii_bus->dev); - + if (!mux_bus) + put_device(&parent_bus->dev); err_parent_bus: of_node_put(parent_bus_node); return ret_val; -- cgit v1.2.1 From 9111e7880ccf419548c7b0887df020b08eadb075 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 10 May 2017 19:07:51 +0200 Subject: s390/qeth: handle sysfs error during initialization When setting up the device from within the layer discipline's probe routine, creating the layer-specific sysfs attributes can fail. Report this error back to the caller, and handle it by releasing the layer discipline. Signed-off-by: Ursula Braun [jwi: updated commit msg, moved an OSN change to a subsequent patch] Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 4 +++- drivers/s390/net/qeth_core_sys.c | 2 ++ drivers/s390/net/qeth_l2_main.c | 5 ++++- drivers/s390/net/qeth_l3_main.c | 5 ++++- 4 files changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 38114a8d56e0..5bfd7c15d6a9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5731,8 +5731,10 @@ static int qeth_core_set_online(struct ccwgroup_device *gdev) if (rc) goto err; rc = card->discipline->setup(card->gdev); - if (rc) + if (rc) { + qeth_core_free_discipline(card); goto err; + } } rc = card->discipline->set_online(gdev); err: diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 75b29fd2fcf4..412ff61891ac 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -426,6 +426,8 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, goto out; rc = card->discipline->setup(card->gdev); + if (rc) + qeth_core_free_discipline(card); out: mutex_unlock(&card->discipline_mutex); return rc ? rc : count; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 1b07f382d74c..2d2623182abf 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -883,8 +883,11 @@ static int qeth_l2_stop(struct net_device *dev) static int qeth_l2_probe_device(struct ccwgroup_device *gdev) { struct qeth_card *card = dev_get_drvdata(&gdev->dev); + int rc; - qeth_l2_create_device_attributes(&gdev->dev); + rc = qeth_l2_create_device_attributes(&gdev->dev); + if (rc) + return rc; INIT_LIST_HEAD(&card->vid_list); hash_init(card->mac_htable); card->options.layer2 = 1; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 6e0354ef4b86..ae70daf33bd5 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3039,8 +3039,11 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) static int qeth_l3_probe_device(struct ccwgroup_device *gdev) { struct qeth_card *card = dev_get_drvdata(&gdev->dev); + int rc; - qeth_l3_create_device_attributes(&gdev->dev); + rc = qeth_l3_create_device_attributes(&gdev->dev); + if (rc) + return rc; card->options.layer2 = 0; card->info.hwtrap = 0; return 0; -- cgit v1.2.1 From 2d2ebb3ed0c6acfb014f98e427298673a5d07b82 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 10 May 2017 19:07:52 +0200 Subject: s390/qeth: unbreak OSM and OSN support commit b4d72c08b358 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows: As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet. Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all. For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes. When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes. This allows us to skip qeth_l2_create_device_attributes() in case of an early setup. Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes. If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice. What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM. Based on an initial patch by Ursula Braun. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 4 ++++ drivers/s390/net/qeth_core_main.c | 17 +++++++++-------- drivers/s390/net/qeth_core_sys.c | 22 ++++++++++++++-------- drivers/s390/net/qeth_l2.h | 2 ++ drivers/s390/net/qeth_l2_main.c | 17 +++++++++++++---- drivers/s390/net/qeth_l2_sys.c | 8 ++++++++ drivers/s390/net/qeth_l3_main.c | 1 + 7 files changed, 51 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index f6aa21176d89..30bc6105aac3 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -701,6 +701,7 @@ enum qeth_discipline_id { }; struct qeth_discipline { + const struct device_type *devtype; void (*start_poll)(struct ccw_device *, int, unsigned long); qdio_handler_t *input_handler; qdio_handler_t *output_handler; @@ -875,6 +876,9 @@ extern struct qeth_discipline qeth_l2_discipline; extern struct qeth_discipline qeth_l3_discipline; extern const struct attribute_group *qeth_generic_attr_groups[]; extern const struct attribute_group *qeth_osn_attr_groups[]; +extern const struct attribute_group qeth_device_attr_group; +extern const struct attribute_group qeth_device_blkt_group; +extern const struct device_type qeth_generic_devtype; extern struct workqueue_struct *qeth_wq; int qeth_card_hw_is_reachable(struct qeth_card *); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 5bfd7c15d6a9..fc6d85f2b38d 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5530,10 +5530,12 @@ void qeth_core_free_discipline(struct qeth_card *card) card->discipline = NULL; } -static const struct device_type qeth_generic_devtype = { +const struct device_type qeth_generic_devtype = { .name = "qeth_generic", .groups = qeth_generic_attr_groups, }; +EXPORT_SYMBOL_GPL(qeth_generic_devtype); + static const struct device_type qeth_osn_devtype = { .name = "qeth_osn", .groups = qeth_osn_attr_groups, @@ -5659,23 +5661,22 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev) goto err_card; } - if (card->info.type == QETH_CARD_TYPE_OSN) - gdev->dev.type = &qeth_osn_devtype; - else - gdev->dev.type = &qeth_generic_devtype; - switch (card->info.type) { case QETH_CARD_TYPE_OSN: case QETH_CARD_TYPE_OSM: rc = qeth_core_load_discipline(card, QETH_DISCIPLINE_LAYER2); if (rc) goto err_card; + + gdev->dev.type = (card->info.type != QETH_CARD_TYPE_OSN) + ? card->discipline->devtype + : &qeth_osn_devtype; rc = card->discipline->setup(card->gdev); if (rc) goto err_disc; - case QETH_CARD_TYPE_OSD: - case QETH_CARD_TYPE_OSX: + break; default: + gdev->dev.type = &qeth_generic_devtype; break; } diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 412ff61891ac..db6a285d41e0 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -413,12 +413,16 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, if (card->options.layer2 == newdis) goto out; - else { - card->info.mac_bits = 0; - if (card->discipline) { - card->discipline->remove(card->gdev); - qeth_core_free_discipline(card); - } + if (card->info.type == QETH_CARD_TYPE_OSM) { + /* fixed layer, can't switch */ + rc = -EOPNOTSUPP; + goto out; + } + + card->info.mac_bits = 0; + if (card->discipline) { + card->discipline->remove(card->gdev); + qeth_core_free_discipline(card); } rc = qeth_core_load_discipline(card, newdis); @@ -705,10 +709,11 @@ static struct attribute *qeth_blkt_device_attrs[] = { &dev_attr_inter_jumbo.attr, NULL, }; -static struct attribute_group qeth_device_blkt_group = { +const struct attribute_group qeth_device_blkt_group = { .name = "blkt", .attrs = qeth_blkt_device_attrs, }; +EXPORT_SYMBOL_GPL(qeth_device_blkt_group); static struct attribute *qeth_device_attrs[] = { &dev_attr_state.attr, @@ -728,9 +733,10 @@ static struct attribute *qeth_device_attrs[] = { &dev_attr_switch_attrs.attr, NULL, }; -static struct attribute_group qeth_device_attr_group = { +const struct attribute_group qeth_device_attr_group = { .attrs = qeth_device_attrs, }; +EXPORT_SYMBOL_GPL(qeth_device_attr_group); const struct attribute_group *qeth_generic_attr_groups[] = { &qeth_device_attr_group, diff --git a/drivers/s390/net/qeth_l2.h b/drivers/s390/net/qeth_l2.h index 29d9fb3890ad..0d59f9a45ea9 100644 --- a/drivers/s390/net/qeth_l2.h +++ b/drivers/s390/net/qeth_l2.h @@ -8,6 +8,8 @@ #include "qeth_core.h" +extern const struct attribute_group *qeth_l2_attr_groups[]; + int qeth_l2_create_device_attributes(struct device *); void qeth_l2_remove_device_attributes(struct device *); void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2d2623182abf..04666fe231aa 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -880,14 +880,21 @@ static int qeth_l2_stop(struct net_device *dev) return 0; } +static const struct device_type qeth_l2_devtype = { + .name = "qeth_layer2", + .groups = qeth_l2_attr_groups, +}; + static int qeth_l2_probe_device(struct ccwgroup_device *gdev) { struct qeth_card *card = dev_get_drvdata(&gdev->dev); int rc; - rc = qeth_l2_create_device_attributes(&gdev->dev); - if (rc) - return rc; + if (gdev->dev.type == &qeth_generic_devtype) { + rc = qeth_l2_create_device_attributes(&gdev->dev); + if (rc) + return rc; + } INIT_LIST_HEAD(&card->vid_list); hash_init(card->mac_htable); card->options.layer2 = 1; @@ -899,7 +906,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev) { struct qeth_card *card = dev_get_drvdata(&cgdev->dev); - qeth_l2_remove_device_attributes(&cgdev->dev); + if (cgdev->dev.type == &qeth_generic_devtype) + qeth_l2_remove_device_attributes(&cgdev->dev); qeth_set_allowed_threads(card, 0, 1); wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0); @@ -1272,6 +1280,7 @@ static int qeth_l2_control_event(struct qeth_card *card, } struct qeth_discipline qeth_l2_discipline = { + .devtype = &qeth_l2_devtype, .start_poll = qeth_qdio_start_poll, .input_handler = (qdio_handler_t *) qeth_qdio_input_handler, .output_handler = (qdio_handler_t *) qeth_qdio_output_handler, diff --git a/drivers/s390/net/qeth_l2_sys.c b/drivers/s390/net/qeth_l2_sys.c index 687972356d6b..9696baa49e2d 100644 --- a/drivers/s390/net/qeth_l2_sys.c +++ b/drivers/s390/net/qeth_l2_sys.c @@ -269,3 +269,11 @@ void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card) } else qeth_bridgeport_an_set(card, 0); } + +const struct attribute_group *qeth_l2_attr_groups[] = { + &qeth_device_attr_group, + &qeth_device_blkt_group, + /* l2 specific, see l2_{create,remove}_device_attributes(): */ + &qeth_l2_bridgeport_attr_group, + NULL, +}; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index ae70daf33bd5..6c2146fc831a 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3309,6 +3309,7 @@ static int qeth_l3_control_event(struct qeth_card *card, } struct qeth_discipline qeth_l3_discipline = { + .devtype = &qeth_generic_devtype, .start_poll = qeth_qdio_start_poll, .input_handler = (qdio_handler_t *) qeth_qdio_input_handler, .output_handler = (qdio_handler_t *) qeth_qdio_output_handler, -- cgit v1.2.1 From 25e2c341e7818a394da9abc403716278ee646014 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Wed, 10 May 2017 19:07:53 +0200 Subject: s390/qeth: avoid null pointer dereference on OSN Access card->dev only after checking whether's its valid. Signed-off-by: Julian Wiedmann Reviewed-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 04666fe231aa..bd2df62a5cdf 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -965,7 +965,6 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) case QETH_CARD_TYPE_OSN: card->dev = alloc_netdev(0, "osn%d", NET_NAME_UNKNOWN, ether_setup); - card->dev->flags |= IFF_NOARP; break; default: card->dev = alloc_etherdev(0); @@ -980,9 +979,12 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) card->dev->min_mtu = 64; card->dev->max_mtu = ETH_MAX_MTU; card->dev->netdev_ops = &qeth_l2_netdev_ops; - card->dev->ethtool_ops = - (card->info.type != QETH_CARD_TYPE_OSN) ? - &qeth_l2_ethtool_ops : &qeth_l2_osn_ops; + if (card->info.type == QETH_CARD_TYPE_OSN) { + card->dev->ethtool_ops = &qeth_l2_osn_ops; + card->dev->flags |= IFF_NOARP; + } else { + card->dev->ethtool_ops = &qeth_l2_ethtool_ops; + } card->dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; if (card->info.type == QETH_CARD_TYPE_OSD && !card->info.guestlan) { card->dev->hw_features = NETIF_F_SG; -- cgit v1.2.1 From ebccc7397e4a49ff64c8f44a54895de9d32fe742 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 10 May 2017 19:07:54 +0200 Subject: s390/qeth: add missing hash table initializations commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") added new hash tables, but missed to initialize them. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Ursula Braun Reviewed-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 6c2146fc831a..d8df1e635163 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3044,6 +3044,8 @@ static int qeth_l3_probe_device(struct ccwgroup_device *gdev) rc = qeth_l3_create_device_attributes(&gdev->dev); if (rc) return rc; + hash_init(card->ip_htable); + hash_init(card->ip_mc_htable); card->options.layer2 = 0; card->info.hwtrap = 0; return 0; -- cgit v1.2.1 From 5b6cb43b4d625b04a4049d727a116edbfe5cf0f4 Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Wed, 10 May 2017 10:28:05 -0700 Subject: net: ethernet: ti: netcp_core: return error while dma channel open issue Fix error path while dma open channel issue. Also, no need to check output on NULL if it's never returned. Signed-off-by: Ivan Khoronzhuk Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 6 ++++-- drivers/soc/ti/knav_dma.c | 2 +- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index 729a7da90b5b..e6222e535019 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -1353,9 +1353,10 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe) tx_pipe->dma_channel = knav_dma_open_channel(dev, tx_pipe->dma_chan_name, &config); - if (IS_ERR_OR_NULL(tx_pipe->dma_channel)) { + if (IS_ERR(tx_pipe->dma_channel)) { dev_err(dev, "failed opening tx chan(%s)\n", tx_pipe->dma_chan_name); + ret = PTR_ERR(tx_pipe->dma_channel); goto err; } @@ -1673,9 +1674,10 @@ static int netcp_setup_navigator_resources(struct net_device *ndev) netcp->rx_channel = knav_dma_open_channel(netcp->netcp_device->device, netcp->dma_chan_name, &config); - if (IS_ERR_OR_NULL(netcp->rx_channel)) { + if (IS_ERR(netcp->rx_channel)) { dev_err(netcp->ndev_dev, "failed opening rx chan(%s\n", netcp->dma_chan_name); + ret = PTR_ERR(netcp->rx_channel); goto fail; } diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c index ecebe2eecc3a..026182d3b27c 100644 --- a/drivers/soc/ti/knav_dma.c +++ b/drivers/soc/ti/knav_dma.c @@ -413,7 +413,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name, * @name: slave channel name * @config: dma configuration parameters * - * Returns pointer to appropriate DMA channel on success or NULL. + * Returns pointer to appropriate DMA channel on success or error. */ void *knav_dma_open_channel(struct device *dev, const char *name, struct knav_dma_cfg *config) -- cgit v1.2.1 From 23b245c04d0ef408087430dd4d1b214a5da1eb78 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 10 May 2017 08:47:11 -0700 Subject: md/raid1/10: avoid unnecessary locking If we add bios to block plugging list, locking is unnecessry, since the block unplug is guaranteed not to run at that time. Reviewed-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 7 +++---- drivers/md/raid10.c | 7 +++---- 2 files changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 7c1f73398800..a17ed6218d51 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1529,17 +1529,16 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio, plug = container_of(cb, struct raid1_plug_cb, cb); else plug = NULL; - spin_lock_irqsave(&conf->device_lock, flags); if (plug) { bio_list_add(&plug->pending, mbio); plug->pending_cnt++; } else { + spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; - } - spin_unlock_irqrestore(&conf->device_lock, flags); - if (!plug) + spin_unlock_irqrestore(&conf->device_lock, flags); md_wakeup_thread(mddev->thread); + } } r1_bio_write_done(r1_bio); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 6b86a0032cf8..4343d7ff9916 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1282,17 +1282,16 @@ static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio, plug = container_of(cb, struct raid10_plug_cb, cb); else plug = NULL; - spin_lock_irqsave(&conf->device_lock, flags); if (plug) { bio_list_add(&plug->pending, mbio); plug->pending_cnt++; } else { + spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; - } - spin_unlock_irqrestore(&conf->device_lock, flags); - if (!plug) + spin_unlock_irqrestore(&conf->device_lock, flags); md_wakeup_thread(mddev->thread); + } } static void raid10_write_request(struct mddev *mddev, struct bio *bio, -- cgit v1.2.1 From d86b5672b1adb98b4cdd6fbf0224bbfb03db6e2e Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Thu, 11 May 2017 13:58:06 +0200 Subject: xen-netfront: avoid crashing on resume after a failure in talk_to_netback() Unavoidable crashes in netfront_resume() and netback_changed() after a previous fail in talk_to_netback() (e.g. when we fail to read MAC from xenstore) were discovered. The failure path in talk_to_netback() does unregister/free for netdev but we don't reset drvdata and we try accessing it after resume. Fix the bug by removing the whole xen device completely with device_unregister(), this guarantees we won't have any calls into netfront after a failure. Signed-off-by: Vitaly Kuznetsov Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 6ffc482550c1..7b61adb6270c 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1934,8 +1934,7 @@ abort_transaction_no_dev_fatal: xennet_disconnect_backend(info); xennet_destroy_queues(info); out: - unregister_netdev(info->netdev); - xennet_free_netdev(info->netdev); + device_unregister(&dev->dev); return err; } -- cgit v1.2.1 From f9c3fe2f43343be7972226c2e736e7a68e383dc1 Mon Sep 17 00:00:00 2001 From: "Chopra, Manish" Date: Thu, 11 May 2017 07:12:47 -0700 Subject: qlcnic: Fix link configuration with autoneg disabled Currently driver returns error on speed configurations for 83xx adapter's non XGBE ports, due to this link doesn't come up on the ports using 1000Base-T as a connector with autoneg disabled. This patch fixes this with initializing appropriate port type based on queried module/connector types from hardware before any speed/autoneg configuration. Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 34 ++++++++++++++++++++++ .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 1 + .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 3 ++ 3 files changed, 38 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 718bf58a7da6..4fb68797630e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3168,6 +3168,40 @@ int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, return 0; } +void qlcnic_83xx_get_port_type(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + struct qlcnic_cmd_args cmd; + u32 config; + int err; + + err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_LINK_STATUS); + if (err) + return; + + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_info(&adapter->pdev->dev, + "Get Link Status Command failed: 0x%x\n", err); + goto out; + } else { + config = cmd.rsp.arg[3]; + + switch (QLC_83XX_SFP_MODULE_TYPE(config)) { + case QLC_83XX_MODULE_FIBRE_1000BASE_SX: + case QLC_83XX_MODULE_FIBRE_1000BASE_LX: + case QLC_83XX_MODULE_FIBRE_1000BASE_CX: + case QLC_83XX_MODULE_TP_1000BASE_T: + ahw->port_type = QLCNIC_GBE; + break; + default: + ahw->port_type = QLCNIC_XGBE; + } + } +out: + qlcnic_free_mbx_args(&cmd); +} + int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter) { u8 pci_func; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 3dfe8e27b51c..b75a81246856 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -637,6 +637,7 @@ void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *, int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *, struct ethtool_pauseparam *); int qlcnic_83xx_test_link(struct qlcnic_adapter *); +void qlcnic_83xx_get_port_type(struct qlcnic_adapter *adapter); int qlcnic_83xx_reg_test(struct qlcnic_adapter *); int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *); int qlcnic_83xx_get_registers(struct qlcnic_adapter *, u32 *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 9a869c15d8bf..7f7deeaf1cf0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -486,6 +486,9 @@ static int qlcnic_set_link_ksettings(struct net_device *dev, u32 ret = 0; struct qlcnic_adapter *adapter = netdev_priv(dev); + if (qlcnic_83xx_check(adapter)) + qlcnic_83xx_get_port_type(adapter); + if (adapter->ahw->port_type != QLCNIC_GBE) return -EOPNOTSUPP; -- cgit v1.2.1 From 33c16bfd5bc00bbb9823d25af46c496966e0ac0d Mon Sep 17 00:00:00 2001 From: "Chopra, Manish" Date: Thu, 11 May 2017 07:12:48 -0700 Subject: qlcnic: Update version to 5.3.66 Bumping up the version as couple of fixes added after 5.3.65 Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 49bad00a0f8f..7245b1072518 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -37,8 +37,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 3 -#define _QLCNIC_LINUX_SUBVERSION 65 -#define QLCNIC_LINUX_VERSIONID "5.3.65" +#define _QLCNIC_LINUX_SUBVERSION 66 +#define QLCNIC_LINUX_VERSIONID "5.3.66" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v1.2.1 From d2be3667f3769b3c60aa294ef7f2b03d1b16559c Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 11 May 2017 19:29:40 +0100 Subject: ethernet: aquantia: remove redundant checks on error status The error status err is initialized as zero and then being checked several times to see if it is less than zero even when it has not been updated. It may seem that the err should be assigned to the return code of the call to the various *offload_en_set calls and then we check for failure, however, these functions are void and never actually return any status. Since these error checks are redundant we can remove these as well as err and the error exit label err_exit. Detected by CoverityScan, CID#1398313 and CID#1398306 ("Logically dead code") Signed-off-by: Colin Ian King Reviewed-by: Lino Sanfilippo Acked-by: Pavel Belous Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 13 +------------ drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 12 +----------- 2 files changed, 2 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index 4ee15ff06a44..faeb4935ef3e 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -200,29 +200,18 @@ err_exit: static int hw_atl_a0_hw_offload_set(struct aq_hw_s *self, struct aq_nic_cfg_s *aq_nic_cfg) { - int err = 0; - /* TX checksums offloads*/ tpo_ipv4header_crc_offload_en_set(self, 1); tpo_tcp_udp_crc_offload_en_set(self, 1); - if (err < 0) - goto err_exit; /* RX checksums offloads*/ rpo_ipv4header_crc_offload_en_set(self, 1); rpo_tcp_udp_crc_offload_en_set(self, 1); - if (err < 0) - goto err_exit; /* LSO offloads*/ tdm_large_send_offload_en_set(self, 0xFFFFFFFFU); - if (err < 0) - goto err_exit; - - err = aq_hw_err_from_flags(self); -err_exit: - return err; + return aq_hw_err_from_flags(self); } static int hw_atl_a0_hw_init_tx_path(struct aq_hw_s *self) diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 42150708191d..1bceb7358e5c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -200,25 +200,18 @@ err_exit: static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self, struct aq_nic_cfg_s *aq_nic_cfg) { - int err = 0; unsigned int i; /* TX checksums offloads*/ tpo_ipv4header_crc_offload_en_set(self, 1); tpo_tcp_udp_crc_offload_en_set(self, 1); - if (err < 0) - goto err_exit; /* RX checksums offloads*/ rpo_ipv4header_crc_offload_en_set(self, 1); rpo_tcp_udp_crc_offload_en_set(self, 1); - if (err < 0) - goto err_exit; /* LSO offloads*/ tdm_large_send_offload_en_set(self, 0xFFFFFFFFU); - if (err < 0) - goto err_exit; /* LRO offloads */ { @@ -245,10 +238,7 @@ static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self, rpo_lro_en_set(self, aq_nic_cfg->is_lro ? 0xFFFFFFFFU : 0U); } - err = aq_hw_err_from_flags(self); - -err_exit: - return err; + return aq_hw_err_from_flags(self); } static int hw_atl_b0_hw_init_tx_path(struct aq_hw_s *self) -- cgit v1.2.1 From df0c8d911abf6ba97b2c2fc3c5a12769e0b081a3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 May 2017 11:24:16 -0700 Subject: net: phy: Call bus->reset() after releasing PHYs from reset The API convention makes it that a given MDIO bus reset should be able to access PHY devices in its reset() callback and perform additional MDIO accesses in order to bring the bus and PHYs in a working state. Commit 69226896ad63 ("mdio_bus: Issue GPIO RESET to PHYs.") broke that contract by first calling bus->reset() and then release all PHYs from reset using their shared GPIO line, so restore the expected functionality here. Fixes: 69226896ad63 ("mdio_bus: Issue GPIO RESET to PHYs.") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index a898e5c4ef1b..8e73f5f36e71 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -364,9 +364,6 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) mutex_init(&bus->mdio_lock); - if (bus->reset) - bus->reset(bus); - /* de-assert bus level PHY GPIO resets */ if (bus->num_reset_gpios > 0) { bus->reset_gpiod = devm_kcalloc(&bus->dev, @@ -396,6 +393,9 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) } } + if (bus->reset) + bus->reset(bus); + for (i = 0; i < PHY_MAX_ADDR; i++) { if ((bus->phy_mask & (1 << i)) == 0) { struct phy_device *phydev; -- cgit v1.2.1 From 70d466f760b351fe30b5f8c956354ddf29aa676b Mon Sep 17 00:00:00 2001 From: Song Liu Date: Thu, 11 May 2017 15:28:28 -0700 Subject: md/r5cache: gracefully handle journal device errors for writeback mode For the raid456 with writeback cache, when journal device failed during normal operation, it is still possible to persist all data, as all pending data is still in stripe cache. However, it is necessary to handle journal failure gracefully. During journal failures, the following logic handles the graceful shutdown of journal: 1. raid5_error() marks the device as Faulty and schedules async work log->disable_writeback_work; 2. In disable_writeback_work (r5c_disable_writeback_async), the mddev is suspended, set to write through, and then resumed. mddev_suspend() flushes all cached stripes; 3. All cached stripes need to be flushed carefully to the RAID array. This patch fixes issues within the process above: 1. In r5c_update_on_rdev_error() schedule disable_writeback_work for journal failures; 2. In r5c_disable_writeback_async(), wait for MD_SB_CHANGE_PENDING, since raid5_error() updates superblock. 3. In handle_stripe(), allow stripes with data in journal (s.injournal > 0) to make progress during log_failed; 4. In delay_towrite(), if log failed only process data in the cache (skip new writes in dev->towrite); 5. In __get_priority_stripe(), process loprio_list during journal device failures. 6. In raid5_remove_disk(), wait for all cached stripes are flushed before calling log_exit(). Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 11 +++++++++-- drivers/md/raid5-log.h | 3 ++- drivers/md/raid5.c | 29 +++++++++++++++++++++++------ 3 files changed, 34 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index a6a62e212cd3..cc3f8442f11f 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -24,6 +24,7 @@ #include "md.h" #include "raid5.h" #include "bitmap.h" +#include "raid5-log.h" /* * metadata/data stored in disk with 4k size unit (a block) regardless @@ -680,6 +681,11 @@ static void r5c_disable_writeback_async(struct work_struct *work) return; pr_info("md/raid:%s: Disabling writeback cache for degraded array.\n", mdname(mddev)); + + /* wait superblock change before suspend */ + wait_event(mddev->sb_wait, + !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)); + mddev_suspend(mddev); log->r5c_journal_mode = R5C_JOURNAL_MODE_WRITE_THROUGH; mddev_resume(mddev); @@ -2983,7 +2989,7 @@ ioerr: return ret; } -void r5c_update_on_rdev_error(struct mddev *mddev) +void r5c_update_on_rdev_error(struct mddev *mddev, struct md_rdev *rdev) { struct r5conf *conf = mddev->private; struct r5l_log *log = conf->log; @@ -2991,7 +2997,8 @@ void r5c_update_on_rdev_error(struct mddev *mddev) if (!log) return; - if (raid5_calc_degraded(conf) > 0 && + if ((raid5_calc_degraded(conf) > 0 || + test_bit(Journal, &rdev->flags)) && conf->log->r5c_journal_mode == R5C_JOURNAL_MODE_WRITE_BACK) schedule_work(&log->disable_writeback_work); } diff --git a/drivers/md/raid5-log.h b/drivers/md/raid5-log.h index 27097101ccca..328d67aedda4 100644 --- a/drivers/md/raid5-log.h +++ b/drivers/md/raid5-log.h @@ -28,7 +28,8 @@ extern void r5c_flush_cache(struct r5conf *conf, int num); extern void r5c_check_stripe_cache_usage(struct r5conf *conf); extern void r5c_check_cached_full_stripe(struct r5conf *conf); extern struct md_sysfs_entry r5c_journal_mode; -extern void r5c_update_on_rdev_error(struct mddev *mddev); +extern void r5c_update_on_rdev_error(struct mddev *mddev, + struct md_rdev *rdev); extern bool r5c_big_stripe_cached(struct r5conf *conf, sector_t sect); extern struct dma_async_tx_descriptor * diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f8055a7abb4b..0ac57a925606 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2689,7 +2689,7 @@ static void raid5_error(struct mddev *mddev, struct md_rdev *rdev) bdevname(rdev->bdev, b), mdname(mddev), conf->raid_disks - mddev->degraded); - r5c_update_on_rdev_error(mddev); + r5c_update_on_rdev_error(mddev, rdev); } /* @@ -3050,6 +3050,11 @@ sector_t raid5_compute_blocknr(struct stripe_head *sh, int i, int previous) * When LOG_CRITICAL, stripes with injournal == 0 will be sent to * no_space_stripes list. * + * 3. during journal failure + * In journal failure, we try to flush all cached data to raid disks + * based on data in stripe cache. The array is read-only to upper + * layers, so we would skip all pending writes. + * */ static inline bool delay_towrite(struct r5conf *conf, struct r5dev *dev, @@ -3063,6 +3068,9 @@ static inline bool delay_towrite(struct r5conf *conf, if (test_bit(R5C_LOG_CRITICAL, &conf->cache_state) && s->injournal > 0) return true; + /* case 3 above */ + if (s->log_failed && s->injournal) + return true; return false; } @@ -4696,10 +4704,15 @@ static void handle_stripe(struct stripe_head *sh) " to_write=%d failed=%d failed_num=%d,%d\n", s.locked, s.uptodate, s.to_read, s.to_write, s.failed, s.failed_num[0], s.failed_num[1]); - /* check if the array has lost more than max_degraded devices and, + /* + * check if the array has lost more than max_degraded devices and, * if so, some requests might need to be failed. + * + * When journal device failed (log_failed), we will only process + * the stripe if there is data need write to raid disks */ - if (s.failed > conf->max_degraded || s.log_failed) { + if (s.failed > conf->max_degraded || + (s.log_failed && s.injournal == 0)) { sh->check_state = 0; sh->reconstruct_state = 0; break_stripe_batch_list(sh, 0); @@ -5272,8 +5285,10 @@ static struct stripe_head *__get_priority_stripe(struct r5conf *conf, int group) struct stripe_head *sh, *tmp; struct list_head *handle_list = NULL; struct r5worker_group *wg; - bool second_try = !r5c_is_writeback(conf->log); - bool try_loprio = test_bit(R5C_LOG_TIGHT, &conf->cache_state); + bool second_try = !r5c_is_writeback(conf->log) && + !r5l_log_disk_error(conf); + bool try_loprio = test_bit(R5C_LOG_TIGHT, &conf->cache_state) || + r5l_log_disk_error(conf); again: wg = NULL; @@ -7521,7 +7536,9 @@ static int raid5_remove_disk(struct mddev *mddev, struct md_rdev *rdev) * neilb: there is no locking about new writes here, * so this cannot be safe. */ - if (atomic_read(&conf->active_stripes)) { + if (atomic_read(&conf->active_stripes) || + atomic_read(&conf->r5c_cached_full_stripes) || + atomic_read(&conf->r5c_cached_partial_stripes)) { return -EBUSY; } log_exit(conf); -- cgit v1.2.1 From 5ddf0440a1a28f00f69ed2e093476bab3b60c2c3 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Thu, 11 May 2017 17:03:44 -0700 Subject: md/r5cache: handle sync with data in write back cache Currently, sync of raid456 array cannot make progress when hitting data in writeback r5cache. This patch fixes this issue by flushing cached data of the stripe before processing the sync request. This is achived by: 1. In handle_stripe(), do not set STRIPE_SYNCING if the stripe is in write back cache; 2. In r5c_try_caching_write(), handle the stripe in sync with write through; 3. In do_release_stripe(), make stripe in sync write out and send it to the state machine. Shaohua: explictly set STRIPE_HANDLE after write out completed Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 8 +++++++- drivers/md/raid5.c | 21 +++++++++++++++------ 2 files changed, 22 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index cc3f8442f11f..4c00bc248287 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -2637,8 +2637,11 @@ int r5c_try_caching_write(struct r5conf *conf, * When run in degraded mode, array is set to write-through mode. * This check helps drain pending write safely in the transition to * write-through mode. + * + * When a stripe is syncing, the write is also handled in write + * through mode. */ - if (s->failed) { + if (s->failed || test_bit(STRIPE_SYNCING, &sh->state)) { r5c_make_stripe_write_out(sh); return -EAGAIN; } @@ -2841,6 +2844,9 @@ void r5c_finish_stripe_write_out(struct r5conf *conf, } r5l_append_flush_payload(log, sh->sector); + /* stripe is flused to raid disks, we can do resync now */ + if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state)) + set_bit(STRIPE_HANDLE, &sh->state); } int r5c_cache_data(struct r5l_log *log, struct stripe_head *sh) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 0ac57a925606..9c4f7659f8b1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -233,11 +233,15 @@ static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh, if (test_bit(R5_InJournal, &sh->dev[i].flags)) injournal++; /* - * When quiesce in r5c write back, set STRIPE_HANDLE for stripes with - * data in journal, so they are not released to cached lists + * In the following cases, the stripe cannot be released to cached + * lists. Therefore, we make the stripe write out and set + * STRIPE_HANDLE: + * 1. when quiesce in r5c write back; + * 2. when resync is requested fot the stripe. */ - if (conf->quiesce && r5c_is_writeback(conf->log) && - !test_bit(STRIPE_HANDLE, &sh->state) && injournal != 0) { + if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) || + (conf->quiesce && r5c_is_writeback(conf->log) && + !test_bit(STRIPE_HANDLE, &sh->state) && injournal != 0)) { if (test_bit(STRIPE_R5C_CACHING, &sh->state)) r5c_make_stripe_write_out(sh); set_bit(STRIPE_HANDLE, &sh->state); @@ -4656,8 +4660,13 @@ static void handle_stripe(struct stripe_head *sh) if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) && !sh->batch_head) { spin_lock(&sh->stripe_lock); - /* Cannot process 'sync' concurrently with 'discard' */ - if (!test_bit(STRIPE_DISCARD, &sh->state) && + /* + * Cannot process 'sync' concurrently with 'discard'. + * Flush data in r5cache before 'sync'. + */ + if (!test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state) && + !test_bit(STRIPE_R5C_FULL_STRIPE, &sh->state) && + !test_bit(STRIPE_DISCARD, &sh->state) && test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) { set_bit(STRIPE_SYNCING, &sh->state); clear_bit(STRIPE_INSYNC, &sh->state); -- cgit v1.2.1 From 5ba9b0a14132d0b8d97affe909f324045a968d03 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Fri, 12 May 2017 11:55:26 +0800 Subject: irqchip/mbigen: Fix memory mapping code Some mbigens share memory regions, and devm_ioremap_resource does not allow to share resources which will break the probe of mbigen, in opposition to devm_ioremap. This patch restores back usage of devm_ioremap function, but with proper error handling and logging. Fixes: 216646e4d82e ("irqchip/mbigen: Fix return value check in mbigen_device_probe()") Signed-off-by: Hanjun Guo Acked-by: Marc Zyngier Cc: Kefeng Wang Cc: linuxarm@huawei.com Cc: Wei Yongjun Cc: MaJun Link: http://lkml.kernel.org/r/1494561328-39514-2-git-send-email-guohanjun@huawei.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mbigen.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index d2306c821ebb..0f5e66e96bd9 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -337,9 +337,12 @@ static int mbigen_device_probe(struct platform_device *pdev) mgn_chip->pdev = pdev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mgn_chip->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mgn_chip->base)) - return PTR_ERR(mgn_chip->base); + mgn_chip->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!mgn_chip->base) { + dev_err(&pdev->dev, "failed to ioremap %pR\n", res); + return -ENOMEM; + } if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) err = mbigen_of_create_domain(pdev, mgn_chip); -- cgit v1.2.1 From ad7cc3c0c57d77b442db323056354d0e49833569 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Fri, 12 May 2017 11:55:27 +0800 Subject: irqchip/mbigen: Fix potential NULL dereferencing platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. Signed-off-by: Hanjun Guo Acked-by: Marc Zyngier Cc: Kefeng Wang Cc: linuxarm@huawei.com Cc: Wei Yongjun Cc: MaJun Link: http://lkml.kernel.org/r/1494561328-39514-3-git-send-email-guohanjun@huawei.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mbigen.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index 0f5e66e96bd9..2fa1e457190d 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -337,6 +337,9 @@ static int mbigen_device_probe(struct platform_device *pdev) mgn_chip->pdev = pdev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + mgn_chip->base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!mgn_chip->base) { -- cgit v1.2.1 From 9459a04b6a5a09967eec94a1b66f0a74312819d9 Mon Sep 17 00:00:00 2001 From: MaJun Date: Fri, 12 May 2017 11:55:28 +0800 Subject: irqchip/mbigen: Fix the clear register offset calculation The register array offset for clearing an interrupt is calculated by: offset = (hwirq - RESERVED_IRQ_PER_MBIGEN_CHIP) / 32; This is wrong because the clear register array includes the reserved interrupts. So the clear operation ends up in the wrong register. This went unnoticed so far, because the hardware clears the real bit through a timeout mechanism when the hardware is configured in debug mode. That debug mode was enabled on early generations of the hardware, so the problem was papered over. On newer hardware with updated firmware the debug mode was disabled, so the bits did not get cleared which causes the system to malfunction. Remove the subtraction of RESERVED_IRQ_PER_MBIGEN_CHIP, so the correct register is accessed. [ tglx: Rewrote changelog ] Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions") Signed-off-by: MaJun Signed-off-by: Hanjun Guo Acked-by: Marc Zyngier Cc: Kefeng Wang Cc: linuxarm@huawei.com Cc: Wei Yongjun Link: http://lkml.kernel.org/r/1494561328-39514-4-git-send-email-guohanjun@huawei.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mbigen.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index 2fa1e457190d..31d6b5a582d2 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -106,10 +106,7 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq, u32 *mask, u32 *addr) { - unsigned int ofst; - - hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; - ofst = hwirq / 32 * 4; + unsigned int ofst = (hwirq / 32) * 4; *mask = 1 << (hwirq % 32); *addr = ofst + REG_MBIGEN_CLEAR_OFFSET; -- cgit v1.2.1 From 9fc3e4dc67fde953fd26adb3cea8f92597810b64 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 11 May 2017 22:11:29 -0500 Subject: net: dsa: mv88e6xxx: add default case to switch Add default case to switch in order to avoid any chance of using an uninitialized variable _low_, in case s->type does not match any of the listed case values. Addresses-Coverity-ID: 1398130 Suggested-by: Andrew Lunn Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 19581d783d8e..d034d8cd7d22 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -849,6 +849,9 @@ static uint64_t _mv88e6xxx_get_ethtool_stat(struct mv88e6xxx_chip *chip, mv88e6xxx_g1_stats_read(chip, reg, &low); if (s->sizeof_stat == 8) mv88e6xxx_g1_stats_read(chip, reg + 1, &high); + break; + default: + return UINT64_MAX; } value = (((u64)high) << 16) | low; return value; -- cgit v1.2.1 From 75cf067953d5ee543b3bda90bbfcbee5e1f94ae8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 12 May 2017 12:11:13 +0200 Subject: net: irda: irda-usb: fix firmware name on big-endian hosts Add missing endianness conversion when using the USB device-descriptor bcdDevice field to construct a firmware file name. Fixes: 8ef80aef118e ("[IRDA]: irda-usb.c: STIR421x cleanups") Cc: stable # 2.6.18 Cc: Nick Fedchik Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/irda/irda-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 8716b8c07feb..6f3c805f7211 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1077,7 +1077,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) * are "42101001.sb" or "42101002.sb" */ sprintf(stir421x_fw_name, "4210%4X.sb", - self->usbdev->descriptor.bcdDevice); + le16_to_cpu(self->usbdev->descriptor.bcdDevice)); ret = request_firmware(&fw, stir421x_fw_name, &self->usbdev->dev); if (ret < 0) return ret; -- cgit v1.2.1 From b12ca80ca145cecadf841ba27cc061c510cd97ca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 12 May 2017 12:13:26 +0200 Subject: net: ch9200: add missing USB-descriptor endianness conversions Add the missing endianness conversions to a debug statement printing the USB device-descriptor idVendor and idProduct fields during probe. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/ch9200.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/ch9200.c b/drivers/net/usb/ch9200.c index c4f1c363e24b..9df3c1ffff35 100644 --- a/drivers/net/usb/ch9200.c +++ b/drivers/net/usb/ch9200.c @@ -310,8 +310,8 @@ static int get_mac_address(struct usbnet *dev, unsigned char *data) int rd_mac_len = 0; netdev_dbg(dev->net, "get_mac_address:\n\tusbnet VID:%0x PID:%0x\n", - dev->udev->descriptor.idVendor, - dev->udev->descriptor.idProduct); + le16_to_cpu(dev->udev->descriptor.idVendor), + le16_to_cpu(dev->udev->descriptor.idProduct)); memset(mac_addr, 0, sizeof(mac_addr)); rd_mac_len = control_read(dev, REQUEST_READ, 0, -- cgit v1.2.1 From 42e6cae1b35b186650f5abc7b24c20ab6986c5a0 Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Fri, 12 May 2017 17:18:50 +0100 Subject: sfc: revert changes to NIC revision numbers The revision enum values (eg EFX_REV_HUNT_A0) form part of our API, and are included in ethtool. If these are inconsistent then ethtool will print garbage for a register dump (ethtool -d). Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/nic.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h index 7b916aa21bde..4d7fb8af880d 100644 --- a/drivers/net/ethernet/sfc/nic.h +++ b/drivers/net/ethernet/sfc/nic.h @@ -18,8 +18,12 @@ #include "mcdi.h" enum { - EFX_REV_SIENA_A0 = 0, - EFX_REV_HUNT_A0 = 1, + /* Revisions 0-2 were Falcon A0, A1 and B0 respectively. + * They are not supported by this driver but these revision numbers + * form part of the ethtool API for register dumping. + */ + EFX_REV_SIENA_A0 = 3, + EFX_REV_HUNT_A0 = 4, }; static inline int efx_nic_rev(struct efx_nic *efx) -- cgit v1.2.1 From 1c4d5f51a812a82de97beee24f48ed05c65ebda5 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 12 May 2017 12:00:01 -0400 Subject: vmxnet3: ensure that adapter is in proper state during force_close There are several paths in vmxnet3, where settings changes cause the adapter to be brought down and back up (vmxnet3_set_ringparam among them). Should part of the reset operation fail, these paths call vmxnet3_force_close, which enables all napi instances prior to calling dev_close (with the expectation that vmxnet3_close will then properly disable them again). However, vmxnet3_force_close neglects to clear VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and leaves all the napi instances in a enabled state while the device itself is closed. If a device in this state is activated again, napi_enable will be called on already enabled napi_instances, leading to a BUG halt. The fix is to simply enausre that the QUIESCED bit is cleared in vmxnet3_force_close to allow quesence to be completed properly on close. Signed-off-by: Neil Horman CC: Shrikrishna Khare CC: "VMware, Inc." CC: "David S. Miller" Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 25bc764ae7dc..d1c7029ded7c 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2962,6 +2962,11 @@ vmxnet3_force_close(struct vmxnet3_adapter *adapter) /* we need to enable NAPI, otherwise dev_close will deadlock */ for (i = 0; i < adapter->num_rx_queues; i++) napi_enable(&adapter->rx_queue[i].napi); + /* + * Need to clear the quiesce bit to ensure that vmxnet3_close + * can quiesce the device properly + */ + clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); dev_close(adapter->netdev); } -- cgit v1.2.1 From d82dd0e34d0347be201fd274dc84cd645dccc064 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Fri, 12 May 2017 14:26:10 +0200 Subject: raid1: prefer disk without bad blocks If an array consists of two drives and the first drive has the bad block, the read request to the region overlapping the bad block chooses the same disk (with bad block) as device to read from over and over and the request gets stuck. If the first disk only partially overlaps with bad block, it becomes a candidate ("best disk") for shorter range of sectors. The second disk is capable of reading the entire requested range and it is updated accordingly, however it is not recorded as a best device for the request. In the end the request is sent to the first disk to read entire range of sectors. It fails and is re-tried in a moment but with the same outcome. Actually it is quite likely scenario but it had little exposure in my test until commit 715d40b93b10 ("md/raid1: add failfast handling for reads.") removed preference for idle disk. Such scenario had been passing as second disk was always chosen when idle. Reset a candidate ("best disk") to read from if disk can read entire range. Do it only if other disk has already been chosen as a candidate for a smaller range. The head position / disk type logic will select the best disk to read from - it is fine as disk with bad block won't be considered for it. Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a17ed6218d51..af5056d56878 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -666,8 +666,11 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect break; } continue; - } else + } else { + if ((sectors > best_good_sectors) && (best_disk >= 0)) + best_disk = -1; best_good_sectors = sectors; + } if (best_disk >= 0) /* At least two disks to choose from so failfast is OK */ -- cgit v1.2.1 From 9d109081c261d87fc84e0cce245796796ae4c460 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 13 May 2017 16:18:21 -0700 Subject: dax: fix false CONFIG_BLOCK dependency In the BLOCK=n case the dax core does not need to / must not emit the block-device-dax helpers. Otherwise it leads to compile errors. Cc: Arnd Bergmann Reported-by: Fabian Frederick Fixes: ef51042472f5 ("block, dax: move 'select DAX' from BLOCK to FS_DAX") Signed-off-by: Dan Williams --- drivers/dax/super.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/dax/super.c b/drivers/dax/super.c index ebf43f531ada..6ed32aac8bbe 100644 --- a/drivers/dax/super.c +++ b/drivers/dax/super.c @@ -44,6 +44,7 @@ void dax_read_unlock(int id) } EXPORT_SYMBOL_GPL(dax_read_unlock); +#ifdef CONFIG_BLOCK int bdev_dax_pgoff(struct block_device *bdev, sector_t sector, size_t size, pgoff_t *pgoff) { @@ -112,6 +113,7 @@ int __bdev_dax_supported(struct super_block *sb, int blocksize) return 0; } EXPORT_SYMBOL_GPL(__bdev_dax_supported); +#endif /** * struct dax_device - anchor object for dax services -- cgit v1.2.1 From 31d848aa1d85530770f0bdf1b61a042335d340ad Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 19 Apr 2017 09:58:23 -0700 Subject: soc: bcm: brcmstb: Correctly match 7435 SoC Remove the duplicate brcm,bcm7425-sun-top-ctrl compatible string and replace it with brcm,bcm7435-sun-top-ctrl which was intended. Fixes: bd0faf08dc7f ("soc: bcm: brcmstb: Match additional compatible strings") Reported-by: Andreas Oberritter Acked-by: Gregory Fong Signed-off-by: Florian Fainelli --- drivers/soc/bcm/brcmstb/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c index b6195fdf0d00..22e98a90468c 100644 --- a/drivers/soc/bcm/brcmstb/common.c +++ b/drivers/soc/bcm/brcmstb/common.c @@ -49,7 +49,7 @@ static const struct of_device_id sun_top_ctrl_match[] = { { .compatible = "brcm,bcm7420-sun-top-ctrl", }, { .compatible = "brcm,bcm7425-sun-top-ctrl", }, { .compatible = "brcm,bcm7429-sun-top-ctrl", }, - { .compatible = "brcm,bcm7425-sun-top-ctrl", }, + { .compatible = "brcm,bcm7435-sun-top-ctrl", }, { .compatible = "brcm,brcmstb-sun-top-ctrl", }, { } }; -- cgit v1.2.1 From b383b544f2666d67446b951a9a97af239dafed5d Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 3 Apr 2017 15:11:22 +0300 Subject: net/mlx5e: Use the correct pause values for ethtool advertising Query the operational pause from firmware (PFCC register) instead of always passing zeros. Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by: Gal Pressman Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index ce7b09d72ff6..d60e681b443e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -849,6 +849,8 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev, struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {0}; + u32 rx_pause = 0; + u32 tx_pause = 0; u32 eth_proto_cap; u32 eth_proto_admin; u32 eth_proto_lp; @@ -871,11 +873,13 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev, an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin); an_status = MLX5_GET(ptys_reg, out, an_status); + mlx5_query_port_pause(mdev, &rx_pause, &tx_pause); + ethtool_link_ksettings_zero_link_mode(link_ksettings, supported); ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising); get_supported(eth_proto_cap, link_ksettings); - get_advertising(eth_proto_admin, 0, 0, link_ksettings); + get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings); get_speed_duplex(netdev, eth_proto_oper, link_ksettings); eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap; -- cgit v1.2.1 From e3c19503712d6360239b19c14cded56dd63c40d7 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 19 Apr 2017 14:35:15 +0300 Subject: net/mlx5e: Fix ethtool pause support and advertise reporting Pause bit should set when RX pause is on, not TX pause. Also, setting Asym_Pause is incorrect, and should be turned off. Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by: Gal Pressman Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index d60e681b443e..8209affa75c3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -794,7 +794,6 @@ static void get_supported(u32 eth_proto_cap, ptys2ethtool_supported_port(link_ksettings, eth_proto_cap); ptys2ethtool_supported_link(supported, eth_proto_cap); ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Pause); - ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Asym_Pause); } static void get_advertising(u32 eth_proto_cap, u8 tx_pause, @@ -804,7 +803,7 @@ static void get_advertising(u32 eth_proto_cap, u8 tx_pause, unsigned long *advertising = link_ksettings->link_modes.advertising; ptys2ethtool_adver_link(advertising, eth_proto_cap); - if (tx_pause) + if (rx_pause) ethtool_link_ksettings_add_link_mode(link_ksettings, advertising, Pause); if (tx_pause ^ rx_pause) ethtool_link_ksettings_add_link_mode(link_ksettings, advertising, Asym_Pause); -- cgit v1.2.1 From 20b6a1c78280dbeb45214c463cf9cbccb3665146 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Tue, 9 May 2017 16:40:46 +0300 Subject: net/mlx5e: Fix setup TC ndo Fail-safe support patches introduced a trivial bug, setup tc callback is doing a wrong check of the netdevice state, the fix is simply to invert the condition. Fixes: 6f9485af4020 ("net/mlx5e: Fail safe tc setup") Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index a61b71b6fff3..41cd22a223dc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2976,7 +2976,7 @@ static int mlx5e_setup_tc(struct net_device *netdev, u8 tc) new_channels.params = priv->channels.params; new_channels.params.num_tc = tc ? tc : 1; - if (test_bit(MLX5E_STATE_OPENED, &priv->state)) { + if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { priv->channels.params = new_channels.params; goto out; } -- cgit v1.2.1 From 5360fd473c23f18b42722cdb13a1c6ec7acd96ff Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Thu, 4 May 2017 17:53:32 +0300 Subject: net/mlx5e: IPoIB, Only support regular RQ for now IPoIB doesn't support striding RQ at the moment, for this we need to explicitly choose non striding RQ in IPoIB init, even if the HW supports it. Fixes: 8f493ffd88ea ("net/mlx5e: IPoIB, RX steering RSS RQTs and TIRs") Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/ipoib.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c index 019c230da498..56bff3540954 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c @@ -66,6 +66,10 @@ static void mlx5i_init(struct mlx5_core_dev *mdev, mlx5e_build_nic_params(mdev, &priv->channels.params, profile->max_nch(mdev)); + /* Override RQ params as IPoIB supports only LINKED LIST RQ for now */ + mlx5e_set_rq_type_params(mdev, &priv->channels.params, MLX5_WQ_TYPE_LINKED_LIST); + priv->channels.params.lro_en = false; + mutex_init(&priv->state_lock); netdev->hw_features |= NETIF_F_SG; -- cgit v1.2.1 From 508541146af18e43072e41a31aa62fac2b01aac1 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 25 Apr 2017 10:39:57 +0300 Subject: net/mlx5: Use underlay QPN from the root name space Root flow table is dynamically changed by the underlying flow steering layer, and IPoIB/ULPs have no idea what will be the root flow table in the future, hence we need a dynamic infrastructure to move Underlay QPs with the root flow table. Fixes: b3ba51498bdd ("net/mlx5: Refactor create flow table method to accept underlay QP") Signed-off-by: Erez Shitrit Signed-off-by: Maor Gottlieb Signed-off-by: Yishai Hadas Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 5 ++--- drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 9 +++----- drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.h | 3 ++- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 25 +++++++++++++++++++---- drivers/net/ethernet/mellanox/mlx5/core/fs_core.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/ipoib.c | 7 +++++-- 7 files changed, 35 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 0099a3e397bc..2fd044b23875 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -1003,7 +1003,7 @@ int mlx5e_create_direct_tirs(struct mlx5e_priv *priv); void mlx5e_destroy_direct_tirs(struct mlx5e_priv *priv); void mlx5e_destroy_rqt(struct mlx5e_priv *priv, struct mlx5e_rqt *rqt); -int mlx5e_create_ttc_table(struct mlx5e_priv *priv, u32 underlay_qpn); +int mlx5e_create_ttc_table(struct mlx5e_priv *priv); void mlx5e_destroy_ttc_table(struct mlx5e_priv *priv); int mlx5e_create_tis(struct mlx5_core_dev *mdev, int tc, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c index 576d6787b484..53ed58320a24 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c @@ -800,7 +800,7 @@ void mlx5e_destroy_ttc_table(struct mlx5e_priv *priv) mlx5e_destroy_flow_table(&ttc->ft); } -int mlx5e_create_ttc_table(struct mlx5e_priv *priv, u32 underlay_qpn) +int mlx5e_create_ttc_table(struct mlx5e_priv *priv) { struct mlx5e_ttc_table *ttc = &priv->fs.ttc; struct mlx5_flow_table_attr ft_attr = {}; @@ -810,7 +810,6 @@ int mlx5e_create_ttc_table(struct mlx5e_priv *priv, u32 underlay_qpn) ft_attr.max_fte = MLX5E_TTC_TABLE_SIZE; ft_attr.level = MLX5E_TTC_FT_LEVEL; ft_attr.prio = MLX5E_NIC_PRIO; - ft_attr.underlay_qpn = underlay_qpn; ft->t = mlx5_create_flow_table(priv->fs.ns, &ft_attr); if (IS_ERR(ft->t)) { @@ -1147,7 +1146,7 @@ int mlx5e_create_flow_steering(struct mlx5e_priv *priv) priv->netdev->hw_features &= ~NETIF_F_NTUPLE; } - err = mlx5e_create_ttc_table(priv, 0); + err = mlx5e_create_ttc_table(priv); if (err) { netdev_err(priv->netdev, "Failed to create ttc table, err=%d\n", err); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c index 19e3d2fc2099..fcec7bedd3cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c @@ -40,28 +40,25 @@ #include "eswitch.h" int mlx5_cmd_update_root_ft(struct mlx5_core_dev *dev, - struct mlx5_flow_table *ft) + struct mlx5_flow_table *ft, u32 underlay_qpn) { u32 in[MLX5_ST_SZ_DW(set_flow_table_root_in)] = {0}; u32 out[MLX5_ST_SZ_DW(set_flow_table_root_out)] = {0}; if ((MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_IB) && - ft->underlay_qpn == 0) + underlay_qpn == 0) return 0; MLX5_SET(set_flow_table_root_in, in, opcode, MLX5_CMD_OP_SET_FLOW_TABLE_ROOT); MLX5_SET(set_flow_table_root_in, in, table_type, ft->type); MLX5_SET(set_flow_table_root_in, in, table_id, ft->id); + MLX5_SET(set_flow_table_root_in, in, underlay_qpn, underlay_qpn); if (ft->vport) { MLX5_SET(set_flow_table_root_in, in, vport_number, ft->vport); MLX5_SET(set_flow_table_root_in, in, other_vport, 1); } - if ((MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_IB) && - ft->underlay_qpn != 0) - MLX5_SET(set_flow_table_root_in, in, underlay_qpn, ft->underlay_qpn); - return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.h b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.h index 8fad80688536..0f98a7cf4877 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.h @@ -71,7 +71,8 @@ int mlx5_cmd_delete_fte(struct mlx5_core_dev *dev, unsigned int index); int mlx5_cmd_update_root_ft(struct mlx5_core_dev *dev, - struct mlx5_flow_table *ft); + struct mlx5_flow_table *ft, + u32 underlay_qpn); int mlx5_cmd_fc_alloc(struct mlx5_core_dev *dev, u16 *id); int mlx5_cmd_fc_free(struct mlx5_core_dev *dev, u16 id); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index b8a176503d38..0e487e8ca634 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -650,7 +650,7 @@ static int update_root_ft_create(struct mlx5_flow_table *ft, struct fs_prio if (ft->level >= min_level) return 0; - err = mlx5_cmd_update_root_ft(root->dev, ft); + err = mlx5_cmd_update_root_ft(root->dev, ft, root->underlay_qpn); if (err) mlx5_core_warn(root->dev, "Update root flow table of id=%u failed\n", ft->id); @@ -818,8 +818,6 @@ static struct mlx5_flow_table *__mlx5_create_flow_table(struct mlx5_flow_namespa goto unlock_root; } - ft->underlay_qpn = ft_attr->underlay_qpn; - tree_init_node(&ft->node, 1, del_flow_table); log_table_sz = ft->max_fte ? ilog2(ft->max_fte) : 0; next_ft = find_next_chained_ft(fs_prio); @@ -1489,7 +1487,8 @@ static int update_root_ft_destroy(struct mlx5_flow_table *ft) new_root_ft = find_next_ft(ft); if (new_root_ft) { - int err = mlx5_cmd_update_root_ft(root->dev, new_root_ft); + int err = mlx5_cmd_update_root_ft(root->dev, new_root_ft, + root->underlay_qpn); if (err) { mlx5_core_warn(root->dev, "Update root flow table of id=%u failed\n", @@ -2062,3 +2061,21 @@ err: mlx5_cleanup_fs(dev); return err; } + +int mlx5_fs_add_rx_underlay_qpn(struct mlx5_core_dev *dev, u32 underlay_qpn) +{ + struct mlx5_flow_root_namespace *root = dev->priv.steering->root_ns; + + root->underlay_qpn = underlay_qpn; + return 0; +} +EXPORT_SYMBOL(mlx5_fs_add_rx_underlay_qpn); + +int mlx5_fs_remove_rx_underlay_qpn(struct mlx5_core_dev *dev, u32 underlay_qpn) +{ + struct mlx5_flow_root_namespace *root = dev->priv.steering->root_ns; + + root->underlay_qpn = 0; + return 0; +} +EXPORT_SYMBOL(mlx5_fs_remove_rx_underlay_qpn); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h index 81eafc7b9dd9..990acee6fb09 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h @@ -118,7 +118,6 @@ struct mlx5_flow_table { /* FWD rules that point on this flow table */ struct list_head fwd_rules; u32 flags; - u32 underlay_qpn; }; struct mlx5_fc_cache { @@ -195,6 +194,7 @@ struct mlx5_flow_root_namespace { struct mlx5_flow_table *root_ft; /* Should be held when chaining flow tables */ struct mutex chain_lock; + u32 underlay_qpn; }; int mlx5_init_fc_stats(struct mlx5_core_dev *dev); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c index 56bff3540954..cc1858752e70 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib.c @@ -160,6 +160,8 @@ out: static void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp) { + mlx5_fs_remove_rx_underlay_qpn(mdev, qp->qpn); + mlx5_core_destroy_qp(mdev, qp); } @@ -174,6 +176,8 @@ static int mlx5i_init_tx(struct mlx5e_priv *priv) return err; } + mlx5_fs_add_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn); + err = mlx5e_create_tis(priv->mdev, 0 /* tc */, ipriv->qp.qpn, &priv->tisn[0]); if (err) { mlx5_core_warn(priv->mdev, "create tis failed, %d\n", err); @@ -193,7 +197,6 @@ static void mlx5i_cleanup_tx(struct mlx5e_priv *priv) static int mlx5i_create_flow_steering(struct mlx5e_priv *priv) { - struct mlx5i_priv *ipriv = priv->ppriv; int err; priv->fs.ns = mlx5_get_flow_namespace(priv->mdev, @@ -209,7 +212,7 @@ static int mlx5i_create_flow_steering(struct mlx5e_priv *priv) priv->netdev->hw_features &= ~NETIF_F_NTUPLE; } - err = mlx5e_create_ttc_table(priv, ipriv->qp.qpn); + err = mlx5e_create_ttc_table(priv); if (err) { netdev_err(priv->netdev, "Failed to create ttc table, err=%d\n", err); -- cgit v1.2.1 From 90b4f30b6d15222a509dacf47f29efef2b22571e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 10 May 2017 16:30:12 +0200 Subject: hwmon: (coretemp) Handle frozen hotplug state correctly The recent conversion to the hotplug state machine missed that the original hotplug notifiers did not execute in the frozen state, which is used on suspend on resume. This does not matter on single socket machines, but on multi socket systems this breaks when the device for a non-boot socket is removed when the last CPU of that socket is brought offline. The device removal locks up the machine hard w/o any debug output. Prevent executing the hotplug callbacks when cpuhp_tasks_frozen is true. Thanks to Tommi for providing debug information patiently while I failed to spot the obvious. Fixes: e00ca5df37ad ("hwmon: (coretemp) Convert to hotplug state machine") Reported-by: Tommi Rantala Tested-by: Tommi Rantala Signed-off-by: Thomas Gleixner Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 3ac4c03ba77b..c13a4fd86b3c 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -604,6 +604,13 @@ static int coretemp_cpu_online(unsigned int cpu) struct cpuinfo_x86 *c = &cpu_data(cpu); struct platform_data *pdata; + /* + * Don't execute this on resume as the offline callback did + * not get executed on suspend. + */ + if (cpuhp_tasks_frozen) + return 0; + /* * CPUID.06H.EAX[0] indicates whether the CPU has thermal * sensors. We check this bit only, all the early CPUs @@ -654,6 +661,13 @@ static int coretemp_cpu_offline(unsigned int cpu) struct temp_data *tdata; int indx, target; + /* + * Don't execute this on suspend as the device remove locks + * up the machine. + */ + if (cpuhp_tasks_frozen) + return 0; + /* If the physical CPU device does not exist, just return */ if (!pdev) return 0; -- cgit v1.2.1 From e23c7f7d57831fdae444be9d507e67716ab601d4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 May 2017 13:37:47 +0200 Subject: soc: imx: add PM dependency for IMX7_PM_DOMAINS The new pm domain driver causes a build failure when CONFIG_PM is not set: warning: (IMX7_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM) drivers/base/power/domain_governor.c: In function 'default_suspend_ok': drivers/base/power/domain_governor.c:75:17: error: 'struct dev_pm_info' has no member named 'ignore_children' This adds a dependency to ensure that we don't attempt to build the driver without CONFIG_PM. Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Signed-off-by: Arnd Bergmann Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index 357a5d8f8da0..a5b86a28f343 100644 --- a/drivers/soc/imx/Kconfig +++ b/drivers/soc/imx/Kconfig @@ -2,8 +2,9 @@ menu "i.MX SoC drivers" config IMX7_PM_DOMAINS bool "i.MX7 PM domains" - select PM_GENERIC_DOMAINS depends on SOC_IMX7D || (COMPILE_TEST && OF) + depends on PM + select PM_GENERIC_DOMAINS default y if SOC_IMX7D endmenu -- cgit v1.2.1 From 072792dcdfc8d5f91a26050e5665285f50afebf5 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 06:14:16 -0400 Subject: dm cache: fix incorrect 'idle_time' reset in IO tracker Some bios have no payload (eg, a FLUSH), don't reset the idle_time when these come in. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-target.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 1db375f50a13..0760ba409c21 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -94,6 +94,9 @@ static void iot_io_begin(struct io_tracker *iot, sector_t len) static void __iot_io_end(struct io_tracker *iot, sector_t len) { + if (!len) + return; + iot->in_flight -= len; if (!iot->in_flight) iot->idle_time = jiffies; -- cgit v1.2.1 From a8cd1eba6135e086109e2b94bf96deb17456ede8 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 05:07:34 -0400 Subject: dm cache policy smq: only demote entries in bottom half of the clean multiqueue Heavy IO load may mean there are very few clean blocks in the cache, and we risk demoting entries that get hit a lot. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-policy-smq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-policy-smq.c b/drivers/md/dm-cache-policy-smq.c index 72479bd61e11..a177559f2049 100644 --- a/drivers/md/dm-cache-policy-smq.c +++ b/drivers/md/dm-cache-policy-smq.c @@ -1190,7 +1190,7 @@ static void queue_demotion(struct smq_policy *mq) if (unlikely(WARN_ON_ONCE(!mq->migrations_allowed))) return; - e = q_peek(&mq->clean, mq->clean.nr_levels, true); + e = q_peek(&mq->clean, mq->clean.nr_levels / 2, true); if (!e) { if (!clean_target_met(mq, false)) queue_writeback(mq); -- cgit v1.2.1 From 78c45607b909fb384c47c134d89b39285a6a8b45 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 05:09:38 -0400 Subject: dm cache policy smq: be more aggressive about triggering a writeback If there are no clean entries to demote we really want to writeback immediately. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-policy-smq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-policy-smq.c b/drivers/md/dm-cache-policy-smq.c index a177559f2049..5aa8f43856c5 100644 --- a/drivers/md/dm-cache-policy-smq.c +++ b/drivers/md/dm-cache-policy-smq.c @@ -1192,7 +1192,7 @@ static void queue_demotion(struct smq_policy *mq) e = q_peek(&mq->clean, mq->clean.nr_levels / 2, true); if (!e) { - if (!clean_target_met(mq, false)) + if (!clean_target_met(mq, true)) queue_writeback(mq); return; } -- cgit v1.2.1 From 4d44ec5ab751be63c5d348f13294304d87baa8c3 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 05:11:06 -0400 Subject: dm cache policy smq: put newly promoted entries at the top of the multiqueue This stops entries bouncing in and out of the cache quickly. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-policy-smq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/md/dm-cache-policy-smq.c b/drivers/md/dm-cache-policy-smq.c index 5aa8f43856c5..54421a846a0c 100644 --- a/drivers/md/dm-cache-policy-smq.c +++ b/drivers/md/dm-cache-policy-smq.c @@ -1452,6 +1452,7 @@ static void __complete_background_work(struct smq_policy *mq, clear_pending(mq, e); if (success) { e->oblock = work->oblock; + e->level = NR_CACHE_LEVELS - 1; push(mq, e); // h, q, a } else { -- cgit v1.2.1 From 6cf4cc8f8b3b7bc9e3c04a7eab44b985d50029fc Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 07:48:18 -0400 Subject: dm cache policy smq: stop preemptively demoting blocks It causes a lot of churn if the working set's size is close to the fast device's size. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-policy-smq.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-policy-smq.c b/drivers/md/dm-cache-policy-smq.c index 54421a846a0c..758480a1893d 100644 --- a/drivers/md/dm-cache-policy-smq.c +++ b/drivers/md/dm-cache-policy-smq.c @@ -1134,13 +1134,10 @@ static bool clean_target_met(struct smq_policy *mq, bool idle) percent_to_target(mq, CLEAN_TARGET); } -static bool free_target_met(struct smq_policy *mq, bool idle) +static bool free_target_met(struct smq_policy *mq) { unsigned nr_free; - if (!idle) - return true; - nr_free = from_cblock(mq->cache_size) - mq->cache_alloc.nr_allocated; return (nr_free + btracker_nr_demotions_queued(mq->bg_work)) >= percent_to_target(mq, FREE_TARGET); @@ -1220,7 +1217,7 @@ static void queue_promotion(struct smq_policy *mq, dm_oblock_t oblock, * We always claim to be 'idle' to ensure some demotions happen * with continuous loads. */ - if (!free_target_met(mq, true)) + if (!free_target_met(mq)) queue_demotion(mq); return; } @@ -1421,14 +1418,10 @@ static int smq_get_background_work(struct dm_cache_policy *p, bool idle, spin_lock_irqsave(&mq->lock, flags); r = btracker_issue(mq->bg_work, result); if (r == -ENODATA) { - /* find some writeback work to do */ - if (mq->migrations_allowed && !free_target_met(mq, idle)) - queue_demotion(mq); - - else if (!clean_target_met(mq, idle)) + if (!clean_target_met(mq, idle)) { queue_writeback(mq); - - r = btracker_issue(mq->bg_work, result); + r = btracker_issue(mq->bg_work, result); + } } spin_unlock_irqrestore(&mq->lock, flags); -- cgit v1.2.1 From 701e03e4e180f0cd97d4139a32e2b2d879d12da2 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 08:22:31 -0400 Subject: dm cache: track all IO to the cache rather than just the origin device's IO IO tracking used to throttle writebacks when the origin device is busy. Even if all the IO is going to the fast device, writebacks can significantly degrade performance. So track all IO to gauge whether the cache is busy or not. Otherwise, synthetic IO tests (e.g. fio) that might send all IO to the fast device wouldn't cause writebacks to get throttled. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-target.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 0760ba409c21..232078e48167 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -477,7 +477,7 @@ struct cache { spinlock_t invalidation_lock; struct list_head invalidation_requests; - struct io_tracker origin_tracker; + struct io_tracker tracker; struct work_struct commit_ws; struct batcher committer; @@ -904,8 +904,7 @@ static dm_oblock_t get_bio_block(struct cache *cache, struct bio *bio) static bool accountable_bio(struct cache *cache, struct bio *bio) { - return ((bio->bi_bdev == cache->origin_dev->bdev) && - bio_op(bio) != REQ_OP_DISCARD); + return bio_op(bio) != REQ_OP_DISCARD; } static void accounted_begin(struct cache *cache, struct bio *bio) @@ -915,7 +914,7 @@ static void accounted_begin(struct cache *cache, struct bio *bio) if (accountable_bio(cache, bio)) { pb->len = bio_sectors(bio); - iot_io_begin(&cache->origin_tracker, pb->len); + iot_io_begin(&cache->tracker, pb->len); } } @@ -924,7 +923,7 @@ static void accounted_complete(struct cache *cache, struct bio *bio) size_t pb_data_size = get_per_bio_data_size(cache); struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size); - iot_io_end(&cache->origin_tracker, pb->len); + iot_io_end(&cache->tracker, pb->len); } static void accounted_request(struct cache *cache, struct bio *bio) @@ -1725,7 +1724,7 @@ enum busy { static enum busy spare_migration_bandwidth(struct cache *cache) { - bool idle = iot_idle_for(&cache->origin_tracker, HZ); + bool idle = iot_idle_for(&cache->tracker, HZ); sector_t current_volume = (atomic_read(&cache->nr_io_migrations) + 1) * cache->sectors_per_block; @@ -2720,7 +2719,7 @@ static int cache_create(struct cache_args *ca, struct cache **result) batcher_init(&cache->committer, commit_op, cache, issue_op, cache, cache->wq); - iot_init(&cache->origin_tracker); + iot_init(&cache->tracker); init_rwsem(&cache->background_work_lock); prevent_background_work(cache); @@ -2944,7 +2943,7 @@ static void cache_postsuspend(struct dm_target *ti) cancel_delayed_work(&cache->waker); flush_workqueue(cache->wq); - WARN_ON(cache->origin_tracker.in_flight); + WARN_ON(cache->tracker.in_flight); /* * If it's a flush suspend there won't be any deferred bios, so this -- cgit v1.2.1 From 49b7f768900f4084a65c3689d955b2fceac39e53 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 09:07:16 -0400 Subject: dm cache: simplify the IDLE vs BUSY state calculation Drop the MODERATE state since it wasn't buying us much. Also, in check_migrations(), prepare for the next commit ("dm cache policy smq: don't do any writebacks unless IDLE") by deferring to the policy to make the final decision on whether writebacks can be serviced. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-target.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 232078e48167..d682a0511381 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -1718,7 +1718,6 @@ static int invalidate_start(struct cache *cache, dm_cblock_t cblock, enum busy { IDLE, - MODERATE, BUSY }; @@ -1728,10 +1727,10 @@ static enum busy spare_migration_bandwidth(struct cache *cache) sector_t current_volume = (atomic_read(&cache->nr_io_migrations) + 1) * cache->sectors_per_block; - if (current_volume <= cache->migration_threshold) - return idle ? IDLE : MODERATE; + if (idle && current_volume <= cache->migration_threshold) + return IDLE; else - return idle ? MODERATE : BUSY; + return BUSY; } static void inc_hit_counter(struct cache *cache, struct bio *bio) @@ -2047,8 +2046,6 @@ static void check_migrations(struct work_struct *ws) for (;;) { b = spare_migration_bandwidth(cache); - if (b == BUSY) - break; r = policy_get_background_work(cache->policy, b == IDLE, &op); if (r == -ENODATA) -- cgit v1.2.1 From 2e63309507c818e8b631a03f02c363031c007fb7 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Thu, 11 May 2017 09:09:04 -0400 Subject: dm cache policy smq: don't do any writebacks unless IDLE If there are no clean blocks to be demoted the writeback will be triggered at that point. Preemptively writing back can hurt high IO load scenarios. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-policy-smq.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-cache-policy-smq.c b/drivers/md/dm-cache-policy-smq.c index 758480a1893d..e5eb9c9b4bc8 100644 --- a/drivers/md/dm-cache-policy-smq.c +++ b/drivers/md/dm-cache-policy-smq.c @@ -1120,8 +1120,6 @@ static bool clean_target_met(struct smq_policy *mq, bool idle) * Cache entries may not be populated. So we cannot rely on the * size of the clean queue. */ - unsigned nr_clean; - if (idle) { /* * We'd like to clean everything. @@ -1129,9 +1127,10 @@ static bool clean_target_met(struct smq_policy *mq, bool idle) return q_size(&mq->dirty) == 0u; } - nr_clean = from_cblock(mq->cache_size) - q_size(&mq->dirty); - return (nr_clean + btracker_nr_writebacks_queued(mq->bg_work)) >= - percent_to_target(mq, CLEAN_TARGET); + /* + * If we're busy we don't worry about cleaning at all. + */ + return true; } static bool free_target_met(struct smq_policy *mq) -- cgit v1.2.1 From 40dd46048c155b8f0683f468c950a1c107f77a7c Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Wed, 3 May 2017 10:28:54 +0200 Subject: usb: serial: option: add Telit ME910 support This patch adds support for Telit ME910 PID 0x1100. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index af67a0de6b5d..3bf61acfc26b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -281,6 +281,7 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE922_USBCFG0 0x1042 #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 +#define TELIT_PRODUCT_ME910 0x1100 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 @@ -640,6 +641,11 @@ static const struct option_blacklist_info simcom_sim7100e_blacklist = { .reserved = BIT(5) | BIT(6), }; +static const struct option_blacklist_info telit_me910_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(3), +}; + static const struct option_blacklist_info telit_le910_blacklist = { .sendsetup = BIT(0), .reserved = BIT(1) | BIT(2), @@ -1235,6 +1241,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), + .driver_info = (kernel_ulong_t)&telit_me910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), -- cgit v1.2.1 From bb246681b3ed0967489a7401ad528c1aaa1a4c2e Mon Sep 17 00:00:00 2001 From: Anthony Mallet Date: Fri, 5 May 2017 17:30:16 +0200 Subject: USB: serial: ftdi_sio: fix setting latency for unprivileged users Commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") enables unprivileged users to set the FTDI latency timer, but there was a logic flaw that skipped sending the corresponding USB control message to the device. Specifically, the device latency timer would not be updated until next open, something which was later also inadvertently broken by commit c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe"). A recent commit c6dce2626606 ("USB: serial: ftdi_sio: fix extreme low-latency setting") disabled the low-latency mode by default so we now need this fix to allow unprivileged users to again enable it. Signed-off-by: Anthony Mallet [johan: amend commit message] Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Fixes: c19db4c9e49a ("USB: ftdi_sio: set device latency timeout at port probe"). Cc: stable # 2.6.31 Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d38780fa8788..0e634c11abbf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1527,9 +1527,9 @@ static int set_serial_info(struct tty_struct *tty, (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; +check_and_exit: write_latency_timer(port); -check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != (priv->flags & ASYNC_SPD_MASK)) { if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) -- cgit v1.2.1 From 849ff8190eb9add34c376219b5ae319de83eeb32 Mon Sep 17 00:00:00 2001 From: Yisheng Xie Date: Sat, 6 May 2017 17:49:08 +0800 Subject: staging/android/ion: remove useless document file After commit 9828282e33a0 ("staging: android: ion: Remove old platform support"), the document about devicetree of ion is no need anymore, so just remove it. Signed-off-by: Yisheng Xie Acked-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/devicetree.txt | 51 ------------------------------ 1 file changed, 51 deletions(-) delete mode 100644 drivers/staging/android/ion/devicetree.txt (limited to 'drivers') diff --git a/drivers/staging/android/ion/devicetree.txt b/drivers/staging/android/ion/devicetree.txt deleted file mode 100644 index 168715271f06..000000000000 --- a/drivers/staging/android/ion/devicetree.txt +++ /dev/null @@ -1,51 +0,0 @@ -Ion Memory Manager - -Ion is a memory manager that allows for sharing of buffers via dma-buf. -Ion allows for different types of allocation via an abstraction called -a 'heap'. A heap represents a specific type of memory. Each heap has -a different type. There can be multiple instances of the same heap -type. - -Specific heap instances are tied to heap IDs. Heap IDs are not to be specified -in the devicetree. - -Required properties for Ion - -- compatible: "linux,ion" PLUS a compatible property for the device - -All child nodes of a linux,ion node are interpreted as heaps - -required properties for heaps - -- compatible: compatible string for a heap type PLUS a compatible property -for the specific instance of the heap. Current heap types --- linux,ion-heap-system --- linux,ion-heap-system-contig --- linux,ion-heap-carveout --- linux,ion-heap-chunk --- linux,ion-heap-dma --- linux,ion-heap-custom - -Optional properties -- memory-region: A phandle to a memory region. Required for DMA heap type -(see reserved-memory.txt for details on the reservation) - -Example: - - ion { - compatbile = "hisilicon,ion", "linux,ion"; - - ion-system-heap { - compatbile = "hisilicon,system-heap", "linux,ion-heap-system" - }; - - ion-camera-region { - compatible = "hisilicon,camera-heap", "linux,ion-heap-dma" - memory-region = <&camera_region>; - }; - - ion-fb-region { - compatbile = "hisilicon,fb-heap", "linux,ion-heap-dma" - memory-region = <&fb_region>; - }; - } -- cgit v1.2.1 From c6a9d3eaee508f53ec4f777035522565ed567692 Mon Sep 17 00:00:00 2001 From: Olivier Leveque Date: Tue, 9 May 2017 09:04:53 -0700 Subject: staging: typec: tcpci: declare private structure as static This fixes a sparse warning regarding an undeclared symbol. Since the structure tcpci_tcpc_config is private to tcpci.c, it should be declared as static. Signed-off-by: Olivier Leveque Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/tcpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/tcpci.c index 5e5be74c7850..df72d8b01e73 100644 --- a/drivers/staging/typec/tcpci.c +++ b/drivers/staging/typec/tcpci.c @@ -425,7 +425,7 @@ static const struct regmap_config tcpci_regmap_config = { .max_register = 0x7F, /* 0x80 .. 0xFF are vendor defined */ }; -const struct tcpc_config tcpci_tcpc_config = { +static const struct tcpc_config tcpci_tcpc_config = { .type = TYPEC_PORT_DFP, .default_role = TYPEC_SINK, }; -- cgit v1.2.1 From 227383f8c28ea9e53d958801790d0e2e8f985d08 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 9 May 2017 09:04:54 -0700 Subject: staging: typec: fusb302: Fix module autoload If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the OF and I2C device ID table entries as module aliases, using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/staging/typec/fusb302/fusb302.ko | grep alias $ After this patch: $ modinfo drivers/staging/typec/fusb302/fusb302.ko | grep alias alias: of:N*T*Cfcs,fusb302C* alias: of:N*T*Cfcs,fusb302 alias: i2c:typec_fusb302 Signed-off-by: Javier Martinez Canillas Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/fusb302/fusb302.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index 2cee9a952c9b..aa460f93a293 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -1787,11 +1787,13 @@ static const struct of_device_id fusb302_dt_match[] = { {.compatible = "fcs,fusb302"}, {}, }; +MODULE_DEVICE_TABLE(of, fusb302_dt_match); static const struct i2c_device_id fusb302_i2c_device_id[] = { {"typec_fusb302", 0}, {}, }; +MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id); static const struct dev_pm_ops fusb302_pm_ops = { .suspend = fusb302_pm_suspend, -- cgit v1.2.1 From aac53ee4557947d778cb6a255c719e5c70963c42 Mon Sep 17 00:00:00 2001 From: Yueyao Zhu Date: Tue, 9 May 2017 09:04:55 -0700 Subject: staging: typec: fusb302: Fix chip->vbus_present init value FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK = 0x40 & 0x80 is always zero. Fix the code to what it is intended to be: check the VBUSOK bit of the value read from address FUSB_REG_STATUS0. Reported-by: Dan Carpenter Cc: Guenter Roeck Signed-off-by: Yueyao Zhu Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/fusb302/fusb302.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index aa460f93a293..d8b50b49bb2d 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -489,7 +489,7 @@ static int tcpm_init(struct tcpc_dev *dev) ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data); if (ret < 0) return ret; - chip->vbus_present = !!(FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK); + chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK); ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data); if (ret < 0) return ret; -- cgit v1.2.1 From 5fec4b54d0bf6c3eeb176b624ce50d6aef4819c0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 May 2017 09:04:56 -0700 Subject: staging: typec: tcpm: Drop duplicate PD messages Per USB PD standard, we have to drop duplicate PD messages. We can not expect lower protocol layers to drop such messages, since lower layers don't know if a message was dropped somewhere else in the stack. Originally-from: Puma Hsu Cc: Yueyao Zhu Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/pd.h | 10 ++++++++++ drivers/staging/typec/tcpm.c | 29 +++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/typec/pd.h b/drivers/staging/typec/pd.h index 8d97bdb95f23..510ef7279900 100644 --- a/drivers/staging/typec/pd.h +++ b/drivers/staging/typec/pd.h @@ -92,6 +92,16 @@ static inline unsigned int pd_header_type_le(__le16 header) return pd_header_type(le16_to_cpu(header)); } +static inline unsigned int pd_header_msgid(u16 header) +{ + return (header >> PD_HEADER_ID_SHIFT) & PD_HEADER_ID_MASK; +} + +static inline unsigned int pd_header_msgid_le(__le16 header) +{ + return pd_header_msgid(le16_to_cpu(header)); +} + #define PD_MAX_PAYLOAD 7 struct pd_message { diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c index abba655ba00a..c5d8b129c4f4 100644 --- a/drivers/staging/typec/tcpm.c +++ b/drivers/staging/typec/tcpm.c @@ -238,6 +238,7 @@ struct tcpm_port { unsigned int hard_reset_count; bool pd_capable; bool explicit_contract; + unsigned int rx_msgid; /* Partner capabilities/requests */ u32 sink_request; @@ -1415,6 +1416,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case SOFT_RESET_SEND: port->message_id = 0; + port->rx_msgid = -1; if (port->pwr_role == TYPEC_SOURCE) next_state = SRC_SEND_CAPABILITIES; else @@ -1503,6 +1505,22 @@ static void tcpm_pd_rx_handler(struct work_struct *work) port->attached); if (port->attached) { + enum pd_ctrl_msg_type type = pd_header_type_le(msg->header); + unsigned int msgid = pd_header_msgid_le(msg->header); + + /* + * USB PD standard, 6.6.1.2: + * "... if MessageID value in a received Message is the + * same as the stored value, the receiver shall return a + * GoodCRC Message with that MessageID value and drop + * the Message (this is a retry of an already received + * Message). Note: this shall not apply to the Soft_Reset + * Message which always has a MessageID value of zero." + */ + if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET) + goto done; + port->rx_msgid = msgid; + /* * If both ends believe to be DFP/host, we have a data role * mismatch. @@ -1520,6 +1538,7 @@ static void tcpm_pd_rx_handler(struct work_struct *work) } } +done: mutex_unlock(&port->lock); kfree(event); } @@ -1957,6 +1976,12 @@ static void tcpm_reset_port(struct tcpm_port *port) port->attached = false; port->pd_capable = false; + /* + * First Rx ID should be 0; set this to a sentinel of -1 so that + * we can check tcpm_pd_rx_handler() if we had seen it before. + */ + port->rx_msgid = -1; + port->tcpc->set_pd_rx(port->tcpc, false); tcpm_init_vbus(port); /* also disables charging */ tcpm_init_vconn(port); @@ -2170,6 +2195,7 @@ static void run_state_machine(struct tcpm_port *port) port->pwr_opmode = TYPEC_PWR_MODE_USB; port->caps_count = 0; port->message_id = 0; + port->rx_msgid = -1; port->explicit_contract = false; tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); break; @@ -2329,6 +2355,7 @@ static void run_state_machine(struct tcpm_port *port) typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB); port->pwr_opmode = TYPEC_PWR_MODE_USB; port->message_id = 0; + port->rx_msgid = -1; port->explicit_contract = false; tcpm_set_state(port, SNK_DISCOVERY, 0); break; @@ -2496,6 +2523,7 @@ static void run_state_machine(struct tcpm_port *port) /* Soft_Reset states */ case SOFT_RESET: port->message_id = 0; + port->rx_msgid = -1; tcpm_pd_send_control(port, PD_CTRL_ACCEPT); if (port->pwr_role == TYPEC_SOURCE) tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); @@ -2504,6 +2532,7 @@ static void run_state_machine(struct tcpm_port *port) break; case SOFT_RESET_SEND: port->message_id = 0; + port->rx_msgid = -1; if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET)) tcpm_set_state_cond(port, hard_reset_state(port), 0); else -- cgit v1.2.1 From 931693f973507b320ecbdccd0ac3e786ddaf795f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 May 2017 09:04:57 -0700 Subject: staging: typec: tcpm: Set correct flags in PD request messages We do support USB PD communication, and devices supported by this driver typically use USB power for purposes other than USB communication. Originally-from: Puma Hsu Cc: Yueyao Zhu Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/tcpm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c index c5d8b129c4f4..a385f7e2a6fd 100644 --- a/drivers/staging/typec/tcpm.c +++ b/drivers/staging/typec/tcpm.c @@ -1738,8 +1738,7 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) } ma = min(ma, port->max_snk_ma); - /* XXX: Any other flags need to be set? */ - flags = 0; + flags = RDO_USB_COMM | RDO_NO_SUSPEND; /* Set mismatch bit if offered power is less than operating power */ mw = ma * mv / 1000; -- cgit v1.2.1 From 193a68011fdc002cc03d6e6edabf941251df5690 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 May 2017 09:04:58 -0700 Subject: staging: typec: tcpm: Respond to Discover Identity commands If the lower level driver provided a list of VDOs in its configuration data, send it to the partner as response to a Discover Identity command if in device mode (UFP). Cc: Yueyao Zhu Originally-from: Puma Hsu Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/pd_vdo.h | 4 +++- drivers/staging/typec/tcpm.c | 27 +++++++++++++++++++++++++++ drivers/staging/typec/tcpm.h | 3 +++ 3 files changed, 33 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/typec/pd_vdo.h b/drivers/staging/typec/pd_vdo.h index dba172e0e0d1..d92259f8de0a 100644 --- a/drivers/staging/typec/pd_vdo.h +++ b/drivers/staging/typec/pd_vdo.h @@ -22,6 +22,9 @@ * VDM object is minimum of VDM header + 6 additional data objects. */ +#define VDO_MAX_OBJECTS 6 +#define VDO_MAX_SIZE (VDO_MAX_OBJECTS + 1) + /* * VDM header * ---------- @@ -34,7 +37,6 @@ * <5> :: reserved (SVDM), command type (UVDM) * <4:0> :: command */ -#define VDO_MAX_SIZE 7 #define VDO(vid, type, custom) \ (((vid) << 16) | \ ((type) << 15) | \ diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c index a385f7e2a6fd..c749e980ddf9 100644 --- a/drivers/staging/typec/tcpm.c +++ b/drivers/staging/typec/tcpm.c @@ -252,6 +252,8 @@ struct tcpm_port { unsigned int nr_src_pdo; u32 snk_pdo[PDO_MAX_OBJECTS]; unsigned int nr_snk_pdo; + u32 snk_vdo[VDO_MAX_OBJECTS]; + unsigned int nr_snk_vdo; unsigned int max_snk_mv; unsigned int max_snk_ma; @@ -998,6 +1000,7 @@ static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, struct pd_mode_data *modep; int rlen = 0; u16 svid; + int i; tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d", p0, cmd_type, cmd, cnt); @@ -1008,6 +1011,14 @@ static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, case CMDT_INIT: switch (cmd) { case CMD_DISCOVER_IDENT: + /* 6.4.4.3.1: Only respond as UFP (device) */ + if (port->data_role == TYPEC_DEVICE && + port->nr_snk_vdo) { + for (i = 0; i < port->nr_snk_vdo; i++) + response[i + 1] + = cpu_to_le32(port->snk_vdo[i]); + rlen = port->nr_snk_vdo + 1; + } break; case CMD_DISCOVER_SVID: break; @@ -3320,6 +3331,20 @@ static int tcpm_copy_pdos(u32 *dest_pdo, const u32 *src_pdo, return nr_pdo; } +static int tcpm_copy_vdos(u32 *dest_vdo, const u32 *src_vdo, + unsigned int nr_vdo) +{ + unsigned int i; + + if (nr_vdo > VDO_MAX_OBJECTS) + nr_vdo = VDO_MAX_OBJECTS; + + for (i = 0; i < nr_vdo; i++) + dest_vdo[i] = src_vdo[i]; + + return nr_vdo; +} + void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo) { @@ -3410,6 +3435,8 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) tcpc->config->nr_src_pdo); port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, tcpc->config->snk_pdo, tcpc->config->nr_snk_pdo); + port->nr_snk_vdo = tcpm_copy_vdos(port->snk_vdo, tcpc->config->snk_vdo, + tcpc->config->nr_snk_vdo); port->max_snk_mv = tcpc->config->max_snk_mv; port->max_snk_ma = tcpc->config->max_snk_ma; diff --git a/drivers/staging/typec/tcpm.h b/drivers/staging/typec/tcpm.h index 969b365e6549..19c307d31a5a 100644 --- a/drivers/staging/typec/tcpm.h +++ b/drivers/staging/typec/tcpm.h @@ -60,6 +60,9 @@ struct tcpc_config { const u32 *snk_pdo; unsigned int nr_snk_pdo; + const u32 *snk_vdo; + unsigned int nr_snk_vdo; + unsigned int max_snk_mv; unsigned int max_snk_ma; unsigned int max_snk_mw; -- cgit v1.2.1 From 050161ea3268ad72d276bc2c327e9654048a82b2 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 May 2017 09:04:59 -0700 Subject: staging: typec: tcpm: Fix Port Power Role field in PS_RDY messages PS_RDY messages sent during power swap sequences are expected to reflect the new power role. Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/tcpm.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c index c749e980ddf9..20eb4ebcf8c3 100644 --- a/drivers/staging/typec/tcpm.c +++ b/drivers/staging/typec/tcpm.c @@ -2607,6 +2607,14 @@ static void run_state_machine(struct tcpm_port *port) break; case PR_SWAP_SRC_SNK_SOURCE_OFF: tcpm_set_cc(port, TYPEC_CC_RD); + /* + * USB-PD standard, 6.2.1.4, Port Power Role: + * "During the Power Role Swap Sequence, for the initial Source + * Port, the Port Power Role field shall be set to Sink in the + * PS_RDY Message indicating that the initial Source’s power + * supply is turned off" + */ + tcpm_set_pwr_role(port, TYPEC_SINK); if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { tcpm_set_state(port, ERROR_RECOVERY, 0); break; @@ -2614,7 +2622,6 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state_cond(port, SNK_UNATTACHED, PD_T_PS_SOURCE_ON); break; case PR_SWAP_SRC_SNK_SINK_ON: - tcpm_set_pwr_role(port, TYPEC_SINK); tcpm_swap_complete(port, 0); tcpm_set_state(port, SNK_STARTUP, 0); break; @@ -2626,8 +2633,15 @@ static void run_state_machine(struct tcpm_port *port) case PR_SWAP_SNK_SRC_SOURCE_ON: tcpm_set_cc(port, tcpm_rp_cc(port)); tcpm_set_vbus(port, true); - tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + /* + * USB PD standard, 6.2.1.4: + * "Subsequent Messages initiated by the Policy Engine, + * such as the PS_RDY Message sent to indicate that Vbus + * is ready, will have the Port Power Role field set to + * Source." + */ tcpm_set_pwr_role(port, TYPEC_SOURCE); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY); tcpm_swap_complete(port, 0); tcpm_set_state(port, SRC_STARTUP, 0); break; -- cgit v1.2.1 From 2c8e3f44f708a89a2c73a25a134af8c23998a2bc Mon Sep 17 00:00:00 2001 From: Rui Miguel Silva Date: Fri, 12 May 2017 21:16:13 +0100 Subject: staging: typec: fusb302: do not free gpio from managed resource When allocating a gpio using the managed resource devm_, we can avoid freeing it manually. But even if we did it we should use devm_gpio_free. So, just remove the free of the gpio in the error path. Signed-off-by: Rui Miguel Silva Acked-by: Yueyao Zhu Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/fusb302/fusb302.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index d8b50b49bb2d..ef5cceaa5967 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -1663,14 +1663,12 @@ static int init_gpio(struct fusb302_chip *chip) if (ret < 0) { fusb302_log(chip, "cannot set GPIO Int_N to input, ret=%d", ret); - gpio_free(chip->gpio_int_n); return ret; } ret = gpio_to_irq(chip->gpio_int_n); if (ret < 0) { fusb302_log(chip, "cannot request IRQ for GPIO Int_N, ret=%d", ret); - gpio_free(chip->gpio_int_n); return ret; } chip->gpio_int_n_irq = ret; -- cgit v1.2.1 From f03d95f59026d14219230795ac4dcda8c09b5321 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Wed, 10 May 2017 22:51:35 -0700 Subject: staging: typec: Fix sparse warnings about incorrect types Fix the following sparse warnings about incorrect type usage: fusb302.c:1028:32: warning: incorrect type in argument 1 (different base types) fusb302.c:1028:32: expected unsigned short [unsigned] [usertype] header fusb302.c:1028:32: got restricted __le16 const [usertype] header fusb302.c:1484:32: warning: incorrect type in argument 1 (different base types) fusb302.c:1484:32: expected unsigned short [unsigned] [usertype] header fusb302.c:1484:32: got restricted __le16 [usertype] header Signed-off-by: Guru Das Srinagesh Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/fusb302/fusb302.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index ef5cceaa5967..6bd602db11be 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -1025,7 +1025,7 @@ static int fusb302_pd_send_message(struct fusb302_chip *chip, buf[pos++] = FUSB302_TKN_SYNC1; buf[pos++] = FUSB302_TKN_SYNC2; - len = pd_header_cnt(msg->header) * 4; + len = pd_header_cnt_le(msg->header) * 4; /* plug 2 for header */ len += 2; if (len > 0x1F) { @@ -1481,7 +1481,7 @@ static int fusb302_pd_read_message(struct fusb302_chip *chip, (u8 *)&msg->header); if (ret < 0) return ret; - len = pd_header_cnt(msg->header) * 4; + len = pd_header_cnt_le(msg->header) * 4; /* add 4 to length to include the CRC */ if (len > PD_MAX_PAYLOAD * 4) { fusb302_log(chip, "PD message too long %d", len); -- cgit v1.2.1 From c21376631d6325590e53ac8720312d2b02494103 Mon Sep 17 00:00:00 2001 From: Ian Chard Date: Wed, 10 May 2017 10:20:59 +0100 Subject: staging: ccree: remove extraneous spin_unlock_bh() in error handler An early error handler in send_request() tries to release a spinlock, but the lock isn't acquired until the loop below it is entered. Signed-off-by: Ian Chard Acked-by: Gilad Ben-Yossef Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ccree/ssi_request_mgr.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/ccree/ssi_request_mgr.c b/drivers/staging/ccree/ssi_request_mgr.c index 522bd62c102e..8611adf3bb2e 100644 --- a/drivers/staging/ccree/ssi_request_mgr.c +++ b/drivers/staging/ccree/ssi_request_mgr.c @@ -376,7 +376,6 @@ int send_request( rc = ssi_power_mgr_runtime_get(&drvdata->plat_dev->dev); if (rc != 0) { SSI_LOG_ERR("ssi_power_mgr_runtime_get returned %x\n",rc); - spin_unlock_bh(&req_mgr_h->hw_lock); return rc; } #endif -- cgit v1.2.1 From ff92b9e3c9f85fa442c430d70bf075499e1193b7 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 4 May 2017 10:58:20 +0100 Subject: staging: vc04_services: Fix bulk cache maintenance vchiq_arm supports transfers less than one page and at arbitrary alignment, using the dma-mapping API to perform its cache maintenance (even though the VPU drives the DMA hardware). Read (DMA_FROM_DEVICE) operations use cache invalidation for speed, falling back to clean+invalidate on partial cache lines, with writes (DMA_TO_DEVICE) using flushes. If a read transfer has ends which aren't page-aligned, performing cache maintenance as if they were whole pages can lead to memory corruption since the partial cache lines at the ends (and any cache lines before or after the transfer area) will be invalidated. This bug was masked until the disabling of the cache flush in flush_dcache_page(). Honouring the requested transfer start- and end-points prevents the corruption. Fixes: cf9caf192988 ("staging: vc04_services: Replace dmac_map_area with dmac_map_sg") Signed-off-by: Phil Elwell Cc: stable # 4.10 Reported-by: Stefan Wahren Tested-by: Stefan Wahren Signed-off-by: Greg Kroah-Hartman --- .../interface/vchiq_arm/vchiq_2835_arm.c | 31 +++++++++++++--------- 1 file changed, 19 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c index 988ee61fb4a7..d04db3f55519 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c @@ -502,8 +502,15 @@ create_pagelist(char __user *buf, size_t count, unsigned short type, */ sg_init_table(scatterlist, num_pages); /* Now set the pages for each scatterlist */ - for (i = 0; i < num_pages; i++) - sg_set_page(scatterlist + i, pages[i], PAGE_SIZE, 0); + for (i = 0; i < num_pages; i++) { + unsigned int len = PAGE_SIZE - offset; + + if (len > count) + len = count; + sg_set_page(scatterlist + i, pages[i], len, offset); + offset = 0; + count -= len; + } dma_buffers = dma_map_sg(g_dev, scatterlist, @@ -524,20 +531,20 @@ create_pagelist(char __user *buf, size_t count, unsigned short type, u32 addr = sg_dma_address(sg); /* Note: addrs is the address + page_count - 1 - * The firmware expects the block to be page + * The firmware expects blocks after the first to be page- * aligned and a multiple of the page size */ WARN_ON(len == 0); - WARN_ON(len & ~PAGE_MASK); - WARN_ON(addr & ~PAGE_MASK); + WARN_ON(i && (i != (dma_buffers - 1)) && (len & ~PAGE_MASK)); + WARN_ON(i && (addr & ~PAGE_MASK)); if (k > 0 && - ((addrs[k - 1] & PAGE_MASK) | - ((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT) - == addr) { - addrs[k - 1] += (len >> PAGE_SHIFT); - } else { - addrs[k++] = addr | ((len >> PAGE_SHIFT) - 1); - } + ((addrs[k - 1] & PAGE_MASK) + + (((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT)) + == (addr & PAGE_MASK)) + addrs[k - 1] += ((len + PAGE_SIZE - 1) >> PAGE_SHIFT); + else + addrs[k++] = (addr & PAGE_MASK) | + (((len + PAGE_SIZE - 1) >> PAGE_SHIFT) - 1); } /* Partial cache lines (fragments) require special measures */ -- cgit v1.2.1 From baabd567f87be05330faa5140f72a91960e7405a Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 11 May 2017 18:57:43 +0100 Subject: staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory. The driver attempts to alter memory that is mapped to PCI device. This is because tx_fwinfo_8190pci points to skb->data Move the pci_map_single to when completed buffer is ready to be mapped with psdec is empty to drop on mapping error. Signed-off-by: Malcolm Priestley Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c index 4723a0bd5067..a23628f390c9 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c @@ -1182,8 +1182,7 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc, struct cb_desc *cb_desc, struct sk_buff *skb) { struct r8192_priv *priv = rtllib_priv(dev); - dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len, - PCI_DMA_TODEVICE); + dma_addr_t mapping; struct tx_fwinfo_8190pci *pTxFwInfo; pTxFwInfo = (struct tx_fwinfo_8190pci *)skb->data; @@ -1194,8 +1193,6 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc, pTxFwInfo->Short = _rtl92e_query_is_short(pTxFwInfo->TxHT, pTxFwInfo->TxRate, cb_desc); - if (pci_dma_mapping_error(priv->pdev, mapping)) - netdev_err(dev, "%s(): DMA Mapping error\n", __func__); if (cb_desc->bAMPDUEnable) { pTxFwInfo->AllowAggregation = 1; pTxFwInfo->RxMF = cb_desc->ampdu_factor; @@ -1230,6 +1227,14 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc, } memset((u8 *)pdesc, 0, 12); + + mapping = pci_map_single(priv->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) { + netdev_err(dev, "%s(): DMA Mapping error\n", __func__); + return; + } + pdesc->LINIP = 0; pdesc->CmdInit = 1; pdesc->Offset = sizeof(struct tx_fwinfo_8190pci) + 8; -- cgit v1.2.1 From 867510bde14e7b7fc6dd0f50b48f6753cfbd227a Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 11 May 2017 18:57:44 +0100 Subject: staging: rtl8192e: fix 2 byte alignment of register BSSIDR. BSSIDR has two byte alignment on PCI ioremap correct the write by swapping to 16 bits first. This fixes a problem that the device associates fail because the filter is not set correctly. Signed-off-by: Malcolm Priestley Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c index a23628f390c9..e03d0a3a6dcc 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c @@ -97,8 +97,9 @@ void rtl92e_set_reg(struct net_device *dev, u8 variable, u8 *val) switch (variable) { case HW_VAR_BSSID: - rtl92e_writel(dev, BSSIDR, ((u32 *)(val))[0]); - rtl92e_writew(dev, BSSIDR+2, ((u16 *)(val+2))[0]); + /* BSSIDR 2 byte alignment */ + rtl92e_writew(dev, BSSIDR, *(u16 *)val); + rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(val + 2)); break; case HW_VAR_MEDIA_STATUS: @@ -961,8 +962,8 @@ static void _rtl92e_net_update(struct net_device *dev) rtl92e_config_rate(dev, &rate_config); priv->dot11CurrentPreambleMode = PREAMBLE_AUTO; priv->basic_rate = rate_config &= 0x15f; - rtl92e_writel(dev, BSSIDR, ((u32 *)net->bssid)[0]); - rtl92e_writew(dev, BSSIDR+4, ((u16 *)net->bssid)[2]); + rtl92e_writew(dev, BSSIDR, *(u16 *)net->bssid); + rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(net->bssid + 2)); if (priv->rtllib->iw_mode == IW_MODE_ADHOC) { rtl92e_writew(dev, ATIMWND, 2); -- cgit v1.2.1 From 90be652c9f157d44b9c2803f902a8839796c090d Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 11 May 2017 18:57:45 +0100 Subject: staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD. EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl will return invalid data so use rtl92e_readw. The device is unable to select the right eeprom type. Signed-off-by: Malcolm Priestley Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c index e03d0a3a6dcc..1c6ed5b2a6f9 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c @@ -625,7 +625,7 @@ void rtl92e_get_eeprom_size(struct net_device *dev) struct r8192_priv *priv = rtllib_priv(dev); RT_TRACE(COMP_INIT, "===========>%s()\n", __func__); - curCR = rtl92e_readl(dev, EPROM_CMD); + curCR = rtl92e_readw(dev, EPROM_CMD); RT_TRACE(COMP_INIT, "read from Reg Cmd9346CR(%x):%x\n", EPROM_CMD, curCR); priv->epromtype = (curCR & EPROM_CMD_9356SEL) ? EEPROM_93C56 : -- cgit v1.2.1 From 95d93e271d920dfda369d4740b1cc1061d41fe7f Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Thu, 11 May 2017 18:57:46 +0100 Subject: staging: rtl8192e: GetTs Fix invalid TID 7 warning. TID 7 is a valid value for QoS IEEE 802.11e. The switch statement that follows states 7 is valid. Remove function IsACValid and use the default case to filter invalid TIDs. Signed-off-by: Malcolm Priestley Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtl819x_TSProc.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8192e/rtl819x_TSProc.c b/drivers/staging/rtl8192e/rtl819x_TSProc.c index 48bbd9e8a52f..dcc4eb691889 100644 --- a/drivers/staging/rtl8192e/rtl819x_TSProc.c +++ b/drivers/staging/rtl8192e/rtl819x_TSProc.c @@ -306,11 +306,6 @@ static void MakeTSEntry(struct ts_common_info *pTsCommonInfo, u8 *Addr, pTsCommonInfo->TClasNum = TCLAS_Num; } -static bool IsACValid(unsigned int tid) -{ - return tid < 7; -} - bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS, u8 *Addr, u8 TID, enum tr_select TxRxSelect, bool bAddNewTs) { @@ -328,12 +323,6 @@ bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS, if (ieee->current_network.qos_data.supported == 0) { UP = 0; } else { - if (!IsACValid(TID)) { - netdev_warn(ieee->dev, "%s(): TID(%d) is not valid\n", - __func__, TID); - return false; - } - switch (TID) { case 0: case 3: @@ -351,6 +340,10 @@ bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS, case 7: UP = 7; break; + default: + netdev_warn(ieee->dev, "%s(): TID(%d) is not valid\n", + __func__, TID); + return false; } } -- cgit v1.2.1 From ad0ccac76dcc92c3331f4c94c9fc54f8bf1ab20c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:19 +0200 Subject: USB: serial: ir-usb: fix big-endian baud-rate debug printk Add missing endianness conversion when printing the supported baud rates. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/ir-usb.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 73956d48a0c5..f9734a96d516 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -197,6 +197,7 @@ static u8 ir_xbof_change(u8 xbof) static int ir_startup(struct usb_serial *serial) { struct usb_irda_cs_descriptor *irda_desc; + int rates; irda_desc = irda_usb_find_class_desc(serial, 0); if (!irda_desc) { @@ -205,18 +206,20 @@ static int ir_startup(struct usb_serial *serial) return -ENODEV; } + rates = le16_to_cpu(irda_desc->wBaudRate); + dev_dbg(&serial->dev->dev, "%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n", __func__, - (irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "", - (irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : ""); + (rates & USB_IRDA_BR_2400) ? " 2400" : "", + (rates & USB_IRDA_BR_9600) ? " 9600" : "", + (rates & USB_IRDA_BR_19200) ? " 19200" : "", + (rates & USB_IRDA_BR_38400) ? " 38400" : "", + (rates & USB_IRDA_BR_57600) ? " 57600" : "", + (rates & USB_IRDA_BR_115200) ? " 115200" : "", + (rates & USB_IRDA_BR_576000) ? " 576000" : "", + (rates & USB_IRDA_BR_1152000) ? " 1152000" : "", + (rates & USB_IRDA_BR_4000000) ? " 4000000" : ""); switch (irda_desc->bmAdditionalBOFs) { case USB_IRDA_AB_48: -- cgit v1.2.1 From 26cede343656c0bc2c33cdc783771282405c7fb2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:20 +0200 Subject: USB: serial: mct_u232: fix big-endian baud-rate handling Drop erroneous cpu_to_le32 when setting the baud rate, something which corrupted the divisor on big-endian hosts. Found using sparse: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] val got restricted __le32 [usertype] Fixes: af2ac1a091bc ("USB: serial mct_usb232: move DMA buffers to heap") Cc: stable # 2.6.34 Reviewed-by: Greg Kroah-Hartman Acked-By: Pete Zaitcev Signed-off-by: Johan Hovold --- drivers/usb/serial/mct_u232.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index edbc81f205c2..70f346f1aa86 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -189,7 +189,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty, return -ENOMEM; divisor = mct_u232_calculate_baud_rate(serial, value, &speed); - put_unaligned_le32(cpu_to_le32(divisor), buf); + put_unaligned_le32(divisor, buf); rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCT_U232_SET_BAUD_RATE_REQUEST, MCT_U232_SET_REQUEST_TYPE, -- cgit v1.2.1 From 6aeb75e6adfaed16e58780309613a578fe1ee90b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:21 +0200 Subject: USB: serial: io_ti: fix div-by-zero in set_termios Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable # 2.6.12 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/io_ti.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 87798e625d6c..6cefb9cb133d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty, if (!baud) { /* pick a default, any default... */ baud = 9600; - } else + } else { + /* Avoid a zero divisor. */ + baud = min(baud, 461550); tty_encode_baud_rate(tty, baud, baud); + } edge_port->baud_rate = baud; config->wBaudRate = (__u16)((461550L + baud/2) / baud); -- cgit v1.2.1 From fb317002ab4419ae7e068bee6897f2d5745aa3b9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 May 2017 12:50:53 +0200 Subject: s390/virtio: change virtio_feature_desc:features type to __le32 The feature member of virtio_feature_desc contains little endian values, given that it contents will be converted with le32_to_cpu(). The "wrong" __u32 type leads to the sparse warnings below. In order to avoid them, use the correct __le32 type instead. drivers/s390/virtio/virtio_ccw.c:749:14: warning: cast to restricted __le32 drivers/s390/virtio/virtio_ccw.c:762:28: warning: cast to restricted __le32 Acked-by: Halil Pasic Acked-by: Cornelia Huck Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/virtio/virtio_ccw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c index 0ed209f3d8b0..c7d4ef7b4b22 100644 --- a/drivers/s390/virtio/virtio_ccw.c +++ b/drivers/s390/virtio/virtio_ccw.c @@ -87,7 +87,7 @@ struct vq_info_block { } __packed; struct virtio_feature_desc { - __u32 features; + __le32 features; __u8 index; } __packed; -- cgit v1.2.1 From ca6e8cdbe1865caf7b05483e1a242e72d9bc919f Mon Sep 17 00:00:00 2001 From: Ian W MORRISON Date: Mon, 8 May 2017 23:40:35 +1000 Subject: staging: rtl8723bs: remove re-positioned call to kfree in os_dep/ioctl_cfg80211.c A re-positioned call to kfree() in drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c causes a segmentation error. This patch removed the kfree() call. Fixes 6557ddfec348 ("staging: rtl8723bs: Fix various errors in os_dep/ioctl_cfg80211.c") Signed-off-by: Ian W Morrison Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c index 5e7a61f24f8d..36c3189fc4b7 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c @@ -3531,7 +3531,6 @@ int rtw_wdev_alloc(struct adapter *padapter, struct device *dev) pwdev_priv->power_mgmt = true; else pwdev_priv->power_mgmt = false; - kfree((u8 *)wdev); return ret; -- cgit v1.2.1 From 9b5fed0daa2a9ea3355ef06bb9e87ce800e71df6 Mon Sep 17 00:00:00 2001 From: Ander Conselvan de Oliveira Date: Fri, 28 Apr 2017 11:02:22 +0300 Subject: drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages The sequence in glk_dsi_device_ready() enters ULPS then waits until it is *not* active to then disable it. The correct sequence according to the spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is zero, i.e., ULPS is active, and then disable ULPS. Fixing the condition gets rid of the following spurious error messages: [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence") Cc: Deepak M Cc: Madhav Chauhan Cc: Jani Nikula Cc: Daniel Vetter Cc: Jani Nikula Cc: intel-gfx@lists.freedesktop.org Cc: Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Madhav Chauhan Link: http://patchwork.freedesktop.org/patch/msgid/20170428080222.6147-1-ander.conselvan.de.oliveira@intel.com (cherry picked from commit 3acbec03b3c51559d01c879e9564d9c9610fe8ce) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dsi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 3ffe8b1f1d48..fc0ef492252a 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder) val |= (ULPS_STATE_ENTER | DEVICE_READY); I915_WRITE(MIPI_DEVICE_READY(port), val); - /* Wait for ULPS Not active */ + /* Wait for ULPS active */ if (intel_wait_for_register(dev_priv, - MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, - GLK_ULPS_NOT_ACTIVE, 20)) - DRM_ERROR("ULPS is still active\n"); + MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20)) + DRM_ERROR("ULPS not active\n"); /* Exit ULPS */ val = I915_READ(MIPI_DEVICE_READY(port)); -- cgit v1.2.1 From 668e3b014afb66ab29e134bca7c258527273ac75 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 27 Apr 2017 19:02:20 +0300 Subject: drm/i915: Fix runtime PM for LPE audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Not calling pm_runtime_enable() means that runtime PM can't be enabled at all via sysfs. So we definitely need to call it from somewhere. Calling it from the driver seems like a bad idea because it would have to be paired with a pm_runtime_disable() at driver unload time, otherwise the core gets upset. Also if there's no LPE audio driver loaded then we couldn't runtime suspend i915 either. So it looks like a better plan is to call it from i915 when we register the platform device. That seems to match how pci generally does things. I cargo culted the pm_runtime_forbid() and pm_runtime_set_active() calls from pci as well. The exposed runtime PM API is massive an thorougly misleading, so I don't actually know if this is how you're supposed to use the API or not. But it seems to work. I can now runtime suspend i915 again with or without the LPE audio driver loaded, and reloading the LPE audio driver also seems to work. Note that powertop won't auto-tune runtime PM for platform devices, which is a little annoying. So I'm not sure that leaving runtime PM in "on" mode by default is the best choice here. But I've left it like that for now at least. Also remove the comment about there not being much benefit from LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime PM, which will also block s0ix, and that could have a measurable impact on power consumption. Cc: stable@vger.kernel.org Cc: Takashi Iwai Cc: Pierre-Louis Bossart Fixes: 0b6b524f3915 ("ALSA: x86: Don't enable runtime PM as default") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com Reviewed-by: Takashi Iwai (cherry picked from commit 183c00350ccda86781f6695840e6c5f5b22efbd1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lpe_audio.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 25d8e76489e4..668f00480d97 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -63,6 +63,7 @@ #include #include #include +#include #include "i915_drv.h" #include @@ -121,6 +122,10 @@ lpe_audio_platdev_create(struct drm_i915_private *dev_priv) kfree(rsc); + pm_runtime_forbid(&platdev->dev); + pm_runtime_set_active(&platdev->dev); + pm_runtime_enable(&platdev->dev); + return platdev; err: -- cgit v1.2.1 From 82f2b4aca8fd90476fc3fd1786d107163ab17201 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 4 May 2017 21:15:30 +0300 Subject: drm/i915: Fix rawclk readout for g4x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Turns out our skills in decoding the CLKCFG register weren't good enough. On this particular elk the answer we got was 400 MHz when in reality the clock was running at 266 MHz, which then caused us to program a bogus AUX clock divider that caused all AUX communication to fail. Sadly the docs are now in bit heaven, so the fix will have to be based on empirical evidence. Using another elk machine I was able to frob the FSB frequency from the BIOS and see how it affects the CLKCFG register. The machine seesm to use a frequency of 266 MHz by default, and fortunately it still boot even with the 50% CPU overclock that we get when we bump the FSB up to 400 MHz. It turns out the actual FSB frequency and the register have no real link whatsoever. The register value is based on some straps or something, but fortunately those too can be configured from the BIOS on this board, although it doesn't seem to respect the settings 100%. In the end I was able to derive the following relationship: BIOS FSB / strap | CLKCFG ------------------------- 200 | 0x2 266 | 0x0 333 | 0x4 400 | 0x4 So only the 200 and 400 MHz cases actually match how we're currently decoding that register. But as the comment next to some of the defines says, we have been just guessing anyway. So let's fix things up so that at least the 266 MHz case will work correctly as that is actually the setting used by both the buggy machine and my test machine. The fact that 333 and 400 MHz BIOS settings result in the same register value is a little disappointing, as that means we can't tell them apart. However, according to the gmch datasheet for both elk and ctg 400 Mhz is not even a supported FSB frequency, so I'm going to make the assumption that we should decode it as 333 MHz instead. Cc: stable@vger.kernel.org Cc: Tomi Sarvela Reported-by: Tomi Sarvela Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100926 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20170504181530.6908-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula Tested-by: Tomi Sarvela (cherry picked from commit 6f38123ecaac446312a63523b68df84ceb5a06ed) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 10 +++++++--- drivers/gpu/drm/i915/intel_cdclk.c | 6 ++---- 2 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 11b12f412492..5a7c63e64381 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3051,10 +3051,14 @@ enum skl_disp_power_wells { #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ +#define CLKCFG_FSB_1067_ALT (0 << 0) /* hrawclk 266 */ #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ -/* Note, below two are guess */ -#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ +/* + * Note that on at least on ELK the below value is reported for both + * 333 and 400 MHz BIOS FSB setting, but given that the gmch datasheet + * lists only 200/266/333 MHz FSB as supported let's decode it as 333 MHz. + */ +#define CLKCFG_FSB_1333_ALT (4 << 0) /* hrawclk 333 */ #define CLKCFG_FSB_MASK (7 << 0) #define CLKCFG_MEM_533 (1 << 4) #define CLKCFG_MEM_667 (2 << 4) diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c index dd3ad52b7dfe..f29a226e24d8 100644 --- a/drivers/gpu/drm/i915/intel_cdclk.c +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -1798,13 +1798,11 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv) case CLKCFG_FSB_800: return 200000; case CLKCFG_FSB_1067: + case CLKCFG_FSB_1067_ALT: return 266667; case CLKCFG_FSB_1333: + case CLKCFG_FSB_1333_ALT: return 333333; - /* these two are just a guess; one of them might be right */ - case CLKCFG_FSB_1600: - case CLKCFG_FSB_1600_ALT: - return 400000; default: return 133333; } -- cgit v1.2.1 From 2f720aac936dc7a301b757d3b197d86c333d59b8 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Fri, 12 May 2017 10:14:23 +0100 Subject: drm/i915: don't do allocate_va_range again on PIN_UPDATE If a vma is already bound to a ppgtt, we incorrectly call allocate_va_range again when doing a PIN_UPDATE, which will result in over accounting within our paging structures, such that when we do unbind something we don't actually destroy the structures and end up inadvertently recycling them. In reality this probably isn't too bad, but once we start touching PDEs and PDPEs for 64K/2M/1G pages this apparent recycling will manifest into lots of really, really subtle bugs. v2: Fix the testing of vma->flags for aliasing_ppgtt_bind_vma Fixes: ff685975d97f ("drm/i915: Move allocate_va_range to GTT") Signed-off-by: Matthew Auld Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/20170512091423.26085-1-chris@chris-wilson.co.uk (cherry picked from commit 1f23475c893a85c934143cd64865ebb9b6af383f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 2aa6b97fd22f..a0563e18d753 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -195,9 +195,12 @@ static int ppgtt_bind_vma(struct i915_vma *vma, u32 pte_flags; int ret; - ret = vma->vm->allocate_va_range(vma->vm, vma->node.start, vma->size); - if (ret) - return ret; + if (!(vma->flags & I915_VMA_LOCAL_BIND)) { + ret = vma->vm->allocate_va_range(vma->vm, vma->node.start, + vma->size); + if (ret) + return ret; + } vma->pages = vma->obj->mm.pages; @@ -2306,7 +2309,8 @@ static int aliasing_gtt_bind_vma(struct i915_vma *vma, if (flags & I915_VMA_LOCAL_BIND) { struct i915_hw_ppgtt *appgtt = i915->mm.aliasing_ppgtt; - if (appgtt->base.allocate_va_range) { + if (!(vma->flags & I915_VMA_LOCAL_BIND) && + appgtt->base.allocate_va_range) { ret = appgtt->base.allocate_va_range(&appgtt->base, vma->node.start, vma->node.size); -- cgit v1.2.1 From 66c25f6e31766a9ec19c2bdc7f5f69f9c59bafd7 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Mon, 15 May 2017 10:56:06 +0200 Subject: net: stmmac: use correct pointer when printing normal descriptor ring There are two pointers in sysfs_display_ring, one that increments if using normal dma descriptors, another if using extended dma descriptors. When printing the normal dma descriptors, the wrong pointer is used, thus the printed descriptor addresses are incorrect. Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index cd8c60132390..a74c481401c4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3725,7 +3725,7 @@ static void sysfs_display_ring(void *head, int size, int extend_desc, ep++; } else { seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n", - i, (unsigned int)virt_to_phys(ep), + i, (unsigned int)virt_to_phys(p), le32_to_cpu(p->des0), le32_to_cpu(p->des1), le32_to_cpu(p->des2), le32_to_cpu(p->des3)); p++; -- cgit v1.2.1 From 68118e0e73aa3a6291c8b9eb1ee708e05f110cea Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Sun, 7 May 2017 07:16:30 +0200 Subject: i2c: mux: reg: put away the parent i2c adapter on probe failure It is only prudent to let go of resources that are not used. Fixes: b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg") Signed-off-by: Peter Rosin --- drivers/i2c/muxes/i2c-mux-reg.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 406d5059072c..11974e3cd1e5 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -196,20 +196,25 @@ static int i2c_mux_reg_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mux->data.reg_size = resource_size(res); mux->data.reg = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mux->data.reg)) - return PTR_ERR(mux->data.reg); + if (IS_ERR(mux->data.reg)) { + ret = PTR_ERR(mux->data.reg); + goto err_put_parent; + } } if (mux->data.reg_size != 4 && mux->data.reg_size != 2 && mux->data.reg_size != 1) { dev_err(&pdev->dev, "Invalid register size\n"); - return -EINVAL; + ret = -EINVAL; + goto err_put_parent; } muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0, i2c_mux_reg_select, NULL); - if (!muxc) - return -ENOMEM; + if (!muxc) { + ret = -ENOMEM; + goto err_put_parent; + } muxc->priv = mux; platform_set_drvdata(pdev, muxc); @@ -233,6 +238,8 @@ static int i2c_mux_reg_probe(struct platform_device *pdev) add_adapter_failed: i2c_mux_del_adapters(muxc); +err_put_parent: + i2c_put_adapter(parent); return ret; } -- cgit v1.2.1 From a36d4637e4a06be067b8e327a0b1118bb2a73cb8 Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Mon, 15 May 2017 18:48:55 +0200 Subject: i2c: mux: reg: rename label to indicate what it does That maintains sanity if it is ever called from some other spot, and also makes the label names coherent. Signed-off-by: Peter Rosin --- drivers/i2c/muxes/i2c-mux-reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 11974e3cd1e5..d97031804de8 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -228,7 +228,7 @@ static int i2c_mux_reg_probe(struct platform_device *pdev) ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class); if (ret) - goto add_adapter_failed; + goto err_del_mux_adapters; } dev_dbg(&pdev->dev, "%d port mux on %s adapter\n", @@ -236,7 +236,7 @@ static int i2c_mux_reg_probe(struct platform_device *pdev) return 0; -add_adapter_failed: +err_del_mux_adapters: i2c_mux_del_adapters(muxc); err_put_parent: i2c_put_adapter(parent); -- cgit v1.2.1 From 9fce894d03a98ec8e8e8106a964644633d2772ee Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Mon, 15 May 2017 09:03:50 +0200 Subject: i2c: mux: only print failure message on error As is, a failure message is printed unconditionally, which is confusing. And noisy. Fixes: 8d4d159f25a7 ("i2c: mux: provide more info on failure in i2c_mux_add_adapter") Signed-off-by: Peter Rosin --- drivers/i2c/i2c-mux.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 26f7237558ba..9669ca4937b8 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -395,18 +395,20 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc, if (force_nr) { priv->adap.nr = force_nr; ret = i2c_add_numbered_adapter(&priv->adap); - dev_err(&parent->dev, - "failed to add mux-adapter %u as bus %u (error=%d)\n", - chan_id, force_nr, ret); + if (ret < 0) { + dev_err(&parent->dev, + "failed to add mux-adapter %u as bus %u (error=%d)\n", + chan_id, force_nr, ret); + goto err_free_priv; + } } else { ret = i2c_add_adapter(&priv->adap); - dev_err(&parent->dev, - "failed to add mux-adapter %u (error=%d)\n", - chan_id, ret); - } - if (ret < 0) { - kfree(priv); - return ret; + if (ret < 0) { + dev_err(&parent->dev, + "failed to add mux-adapter %u (error=%d)\n", + chan_id, ret); + goto err_free_priv; + } } WARN(sysfs_create_link(&priv->adap.dev.kobj, &muxc->dev->kobj, @@ -422,6 +424,10 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc, muxc->adapter[muxc->num_adapters++] = &priv->adap; return 0; + +err_free_priv: + kfree(priv); + return ret; } EXPORT_SYMBOL_GPL(i2c_mux_add_adapter); -- cgit v1.2.1 From 70957eaecc2e43308e403c80293bec3d59632412 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 11 May 2017 11:09:52 -0400 Subject: macvlan: Fix performance issues with vlan tagged packets Macvlan always turns on offload features that have sofware fallback (NETIF_GSO_SOFTWARE). This allows much higher guest-guest communications over macvtap. However, macvtap does not turn on these features for vlan tagged traffic. As a result, depending on the HW that mactap is configured on, the performance of guest-guest communication over a vlan is very inconsistent. If the HW supports TSO/UFO over vlans, then the performance will be fine. If not, the the performance will suffer greatly since the VM may continue using TSO/UFO, and will force the host segment the traffic and possibly overlow the macvtap queue. This patch adds the always on offloads to vlan_features. This makes sure that any vlan tagged traffic between 2 guest will not be segmented needlessly. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index b34eaaae03fd..346ad2ff3998 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -789,10 +789,12 @@ static int macvlan_change_mtu(struct net_device *dev, int new_mtu) */ static struct lock_class_key macvlan_netdev_addr_lock_key; -#define ALWAYS_ON_FEATURES \ - (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_GSO_SOFTWARE | NETIF_F_LLTX | \ +#define ALWAYS_ON_OFFLOADS \ + (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_GSO_SOFTWARE | \ NETIF_F_GSO_ROBUST) +#define ALWAYS_ON_FEATURES (ALWAYS_ON_OFFLOADS | NETIF_F_LLTX) + #define MACVLAN_FEATURES \ (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \ NETIF_F_GSO | NETIF_F_TSO | NETIF_F_UFO | NETIF_F_LRO | \ @@ -827,6 +829,7 @@ static int macvlan_init(struct net_device *dev) dev->features |= ALWAYS_ON_FEATURES; dev->hw_features |= NETIF_F_LRO; dev->vlan_features = lowerdev->vlan_features & MACVLAN_FEATURES; + dev->vlan_features |= ALWAYS_ON_OFFLOADS; dev->gso_max_size = lowerdev->gso_max_size; dev->gso_max_segs = lowerdev->gso_max_segs; dev->hard_header_len = lowerdev->hard_header_len; -- cgit v1.2.1 From 4762010f09ac0453f613df345c5281e7f2dec510 Mon Sep 17 00:00:00 2001 From: "yuval.shaia@oracle.com" Date: Fri, 12 May 2017 09:10:51 +0300 Subject: net/mlx4_core: Use min3 to select number of MSI-X vectors Signed-off-by: Yuval Shaia Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 703205475524..83aab1e4c8c8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2862,12 +2862,10 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev) int port = 0; if (msi_x) { - int nreq = dev->caps.num_ports * num_online_cpus() + 1; - - nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, - nreq); - if (nreq > MAX_MSIX) - nreq = MAX_MSIX; + int nreq = min3(dev->caps.num_ports * + (int)num_online_cpus() + 1, + dev->caps.num_eqs - dev->caps.reserved_eqs, + MAX_MSIX); entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL); if (!entries) -- cgit v1.2.1 From 8c977f5a856a7276450ddf3a7b57b4a8815b63f9 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 12 May 2017 22:54:23 +0800 Subject: mdio: mux: fix device_node_continue.cocci warnings Device node iterators put the previous value of the index variable, so an explicit put causes a double put. In particular, of_mdiobus_register can fail before doing anything interesting, so one could view it as a no-op from the reference count point of view. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci CC: Jon Mason Signed-off-by: Julia Lawall Signed-off-by: Fengguang Wu Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 6943c5ece44a..599ce24c514f 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -169,7 +169,6 @@ int mdio_mux_init(struct device *dev, if (r) { mdiobus_free(cb->mii_bus); devm_kfree(dev, cb); - of_node_put(child_bus_node); } else { cb->next = pb->children; pb->children = cb; -- cgit v1.2.1 From aa4ad88cfcd4ee45f527fb982140576711e3b501 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sun, 14 May 2017 12:21:23 +0300 Subject: qed: Fix uninitialized data in aRFS infrastructure Current memset is using incorrect type of variable, causing the upper-half of the strucutre to be left uninitialized and causing: ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable': ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized] Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Reported-by: Arnd Bergmann Signed-off-by: Yuval Mintz Reviewed-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c b/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c index 67200c5498ab..0a8fde629991 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c +++ b/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c @@ -983,7 +983,7 @@ void qed_set_rfs_mode_disable(struct qed_hwfn *p_hwfn, memset(&camline, 0, sizeof(union gft_cam_line_union)); qed_wr(p_hwfn, p_ptt, PRS_REG_GFT_CAM + CAM_LINE_SIZE * pf_id, camline.cam_line_mapped.camline); - memset(&ramline, 0, sizeof(union gft_cam_line_union)); + memset(&ramline, 0, sizeof(ramline)); for (i = 0; i < RAM_LINE_SIZE / REG_SIZE; i++) { u32 hw_addr = PRS_REG_GFT_PROFILE_MASK_RAM; -- cgit v1.2.1 From 91bcdb92d39711d1adb40c26b653b7978d93eb98 Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Mon, 15 May 2017 09:43:05 -0400 Subject: dm thin metadata: call precommit before saving the roots These calls were the wrong way round in __write_initial_superblock. Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/dm-thin-metadata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 0f0251d0d337..d31d18d9727c 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -484,11 +484,11 @@ static int __write_initial_superblock(struct dm_pool_metadata *pmd) if (r < 0) return r; - r = save_sm_roots(pmd); + r = dm_tm_pre_commit(pmd->tm); if (r < 0) return r; - r = dm_tm_pre_commit(pmd->tm); + r = save_sm_roots(pmd); if (r < 0) return r; -- cgit v1.2.1 From 0377a07c7a035e0d033cd8b29f0cb15244c0916a Mon Sep 17 00:00:00 2001 From: Joe Thornber Date: Mon, 15 May 2017 09:45:40 -0400 Subject: dm space map disk: fix some book keeping in the disk space map When decrementing the reference count for a block, the free count wasn't being updated if the reference count went to zero. Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer --- drivers/md/persistent-data/dm-space-map-disk.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c index ebb280a14325..32adf6b4a9c7 100644 --- a/drivers/md/persistent-data/dm-space-map-disk.c +++ b/drivers/md/persistent-data/dm-space-map-disk.c @@ -142,10 +142,23 @@ static int sm_disk_inc_block(struct dm_space_map *sm, dm_block_t b) static int sm_disk_dec_block(struct dm_space_map *sm, dm_block_t b) { + int r; + uint32_t old_count; enum allocation_event ev; struct sm_disk *smd = container_of(sm, struct sm_disk, sm); - return sm_ll_dec(&smd->ll, b, &ev); + r = sm_ll_dec(&smd->ll, b, &ev); + if (!r && (ev == SM_FREE)) { + /* + * It's only free if it's also free in the last + * transaction. + */ + r = sm_ll_lookup(&smd->old_ll, b, &old_count); + if (!r && !old_count) + smd->nr_allocated_this_transaction--; + } + + return r; } static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b) -- cgit v1.2.1 From ece0728037b15f4d31198f12b359104bcb5db4c8 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 15 May 2017 17:28:36 +0200 Subject: dm rq: add a missing break to map_request We don't want to bug when receiving a DM_MAPIO_KILL value.. Fixes: 412445ac ("dm: introduce a new DM_MAPIO_KILL return value") Signed-off-by: Christoph Hellwig Signed-off-by: Mike Snitzer --- drivers/md/dm-rq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c index 2af27026aa2e..b639fa7246ee 100644 --- a/drivers/md/dm-rq.c +++ b/drivers/md/dm-rq.c @@ -507,6 +507,7 @@ static int map_request(struct dm_rq_target_io *tio) case DM_MAPIO_KILL: /* The target wants to complete the I/O */ dm_kill_unmapped_request(rq, -EIO); + break; default: DMWARN("unimplemented target map return value: %d", r); BUG(); -- cgit v1.2.1 From 18a482f5245cc875755090853e84283512b3e6bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 15 May 2017 17:28:37 +0200 Subject: dm mpath: don't return -EIO from dm_report_EIO Instead just turn the macro into a helper for the warning message. This removes an unnecessary assignment and will allow the next commit to fix a place where -EIO is the wrong return value. Signed-off-by: Christoph Hellwig Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 926a6bcb32c8..d55454f98b59 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -447,7 +447,7 @@ failed: * it has been invoked. */ #define dm_report_EIO(m) \ -({ \ +do { \ struct mapped_device *md = dm_table_get_md((m)->ti->table); \ \ pr_debug("%s: returning EIO; QIFNP = %d; SQIFNP = %d; DNFS = %d\n", \ @@ -455,8 +455,7 @@ failed: test_bit(MPATHF_QUEUE_IF_NO_PATH, &(m)->flags), \ test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &(m)->flags), \ dm_noflush_suspending((m)->ti)); \ - -EIO; \ -}) +} while (0) /* * Map cloned requests (request-based multipath) @@ -481,7 +480,8 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq, if (!pgpath) { if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) return DM_MAPIO_DELAY_REQUEUE; - return dm_report_EIO(m); /* Failed */ + dm_report_EIO(m); /* Failed */ + return -EIO; } else if (test_bit(MPATHF_QUEUE_IO, &m->flags) || test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) { if (pg_init_all_paths(m)) @@ -558,7 +558,8 @@ static int __multipath_map_bio(struct multipath *m, struct bio *bio, struct dm_m if (!pgpath) { if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) return DM_MAPIO_REQUEUE; - return dm_report_EIO(m); + dm_report_EIO(m); + return -EIO; } mpio->pgpath = pgpath; @@ -1493,7 +1494,7 @@ static int multipath_end_io(struct dm_target *ti, struct request *clone, if (atomic_read(&m->nr_valid_paths) == 0 && !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { if (error == -EIO) - error = dm_report_EIO(m); + dm_report_EIO(m); /* complete with the original error */ r = DM_ENDIO_DONE; } @@ -1524,8 +1525,10 @@ static int do_end_io_bio(struct multipath *m, struct bio *clone, fail_path(mpio->pgpath); if (atomic_read(&m->nr_valid_paths) == 0 && - !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) - return dm_report_EIO(m); + !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { + dm_report_EIO(m); + return -EIO; + } /* Queue for the daemon to resubmit */ dm_bio_restore(get_bio_details_from_bio(clone), clone); -- cgit v1.2.1 From f98e0eb68008aff9824d1c4dad7276c8bab83ca5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 15 May 2017 17:28:38 +0200 Subject: dm mpath: multipath_clone_and_map must not return -EIO Since 412445ac ("dm: introduce a new DM_MAPIO_KILL return value"), the clone_and_map_rq methods must not return errno values, so fix it up to properly return DM_MAPIO_KILL, instead of the -EIO value that snuck in due to a conflict between two patches. Signed-off-by: Christoph Hellwig Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index d55454f98b59..3df056b73b66 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -481,7 +481,7 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq, if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) return DM_MAPIO_DELAY_REQUEUE; dm_report_EIO(m); /* Failed */ - return -EIO; + return DM_MAPIO_KILL; } else if (test_bit(MPATHF_QUEUE_IO, &m->flags) || test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) { if (pg_init_all_paths(m)) -- cgit v1.2.1 From ca9df7ede41afd006d74fd6f09f36d909d0eaad7 Mon Sep 17 00:00:00 2001 From: Miroslav Lichvar Date: Mon, 15 May 2017 16:04:36 +0200 Subject: net: netcp: fix check of requested timestamping filter The driver doesn't support timestamping of all received packets and should return error when trying to enable the HWTSTAMP_FILTER_ALL filter. Cc: WingMan Kwok Cc: Richard Cochran Signed-off-by: Miroslav Lichvar Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_ethss.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c index 897176fc5043..dd92950a4615 100644 --- a/drivers/net/ethernet/ti/netcp_ethss.c +++ b/drivers/net/ethernet/ti/netcp_ethss.c @@ -2651,7 +2651,6 @@ static int gbe_hwtstamp_set(struct gbe_intf *gbe_intf, struct ifreq *ifr) case HWTSTAMP_FILTER_NONE: cpts_rx_enable(cpts, 0); break; - case HWTSTAMP_FILTER_ALL: case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: -- cgit v1.2.1 From b18e5e86b44be0dca399d8e2383f97c8077392ce Mon Sep 17 00:00:00 2001 From: Thomas Tai Date: Mon, 15 May 2017 10:51:07 -0700 Subject: ldmvsw: unregistering netdev before disable hardware When running LDom binding/unbinding test, kernel may panic in ldmvsw_open(). It is more likely that because we're removing the ldc connection before unregistering the netdev in vsw_port_remove(), we set up a window of time where one process could be removing the device while another trying to UP the device. This also sometimes causes vio handshake error due to opening a device without closing it completely. We should unregister the netdev before we disable the "hardware". Orabug: 25980913, 25925306 Signed-off-by: Thomas Tai Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/ldmvsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c index 5a90fed06260..309747c7b8ae 100644 --- a/drivers/net/ethernet/sun/ldmvsw.c +++ b/drivers/net/ethernet/sun/ldmvsw.c @@ -413,6 +413,7 @@ static int vsw_port_remove(struct vio_dev *vdev) del_timer_sync(&port->vio.timer); napi_disable(&port->napi); + unregister_netdev(port->dev); list_del_rcu(&port->list); @@ -427,7 +428,6 @@ static int vsw_port_remove(struct vio_dev *vdev) dev_set_drvdata(&vdev->dev, NULL); - unregister_netdev(port->dev); free_netdev(port->dev); } -- cgit v1.2.1 From 8b671f906c2debc4f2393438c4e7668936522e99 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 15 May 2017 10:51:08 -0700 Subject: ldmvsw: stop the clean timer at beginning of remove Stop the clean timer earlier to be sure there's no asynchronous interference while stopping the port. Orabug: 25748241 Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/ldmvsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c index 309747c7b8ae..5b56c24b6ed2 100644 --- a/drivers/net/ethernet/sun/ldmvsw.c +++ b/drivers/net/ethernet/sun/ldmvsw.c @@ -411,6 +411,7 @@ static int vsw_port_remove(struct vio_dev *vdev) if (port) { del_timer_sync(&port->vio.timer); + del_timer_sync(&port->clean_timer); napi_disable(&port->napi); unregister_netdev(port->dev); @@ -418,7 +419,6 @@ static int vsw_port_remove(struct vio_dev *vdev) list_del_rcu(&port->list); synchronize_rcu(); - del_timer_sync(&port->clean_timer); spin_lock_irqsave(&port->vp->lock, flags); sunvnet_port_rm_txq_common(port); spin_unlock_irqrestore(&port->vp->lock, flags); -- cgit v1.2.1 From 2d4456c73a487abe53863e10641c2f73537edf5c Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 11 May 2017 10:27:35 -0500 Subject: block: xen-blkback: add null check to avoid null pointer dereference Add null check before calling xen_blkif_put() to avoid potential null pointer dereference. Addresses-Coverity-ID: 1350942 Cc: Juergen Gross Signed-off-by: Gustavo A. R. Silva Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 8fe61b5dc5a6..1f3dfaa54d87 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -504,11 +504,13 @@ static int xen_blkbk_remove(struct xenbus_device *dev) dev_set_drvdata(&dev->dev, NULL); - if (be->blkif) + if (be->blkif) { xen_blkif_disconnect(be->blkif); - /* Put the reference we set in xen_blkif_alloc(). */ - xen_blkif_put(be->blkif); + /* Put the reference we set in xen_blkif_alloc(). */ + xen_blkif_put(be->blkif); + } + kfree(be->mode); kfree(be); return 0; -- cgit v1.2.1 From 682179592e48fa66056fbad1a86604be4992f885 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 1 Apr 2016 17:13:13 +0300 Subject: usb: dwc3: pci: add Intel Cannonlake PCI IDs Intel Cannonlake PCH has the same DWC3 than Intel Sunrisepoint. Add the new IDs to the supported devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index a15ec71d0423..84a2cebfc712 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -39,6 +39,8 @@ #define PCI_DEVICE_ID_INTEL_APL 0x5aaa #define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 #define PCI_DEVICE_ID_INTEL_GLK 0x31aa +#define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee +#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -270,6 +272,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.1 From f1d6826cae30e97e37a1f2481d7e1dc4faa09ce1 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 21 Apr 2017 15:58:08 +0300 Subject: usb: dwc3: gadget: Fix ISO transfer performance Commit 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()") caused a small change in the way ISO transfer is handled in the case when XferInProgress event happens on Isoc EP with an active transfer. This caused a performance degradation of 50%. e.g. using g_webcam on DUT and luvcview on host the video frame rate dropped from 16fps to 8fps @high-speed. Make the ISO transfer handling equivalent to that prior to that commit to get back the original ISO performance numbers. Fixes: 08a36b543803 ("usb: dwc3: gadget: simplify __dwc3_gadget_ep_queue()") Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 6f6f0b3be3ad..3d6180805eb8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1261,14 +1261,24 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) __dwc3_gadget_start_isoc(dwc, dep, cur_uf); dep->flags &= ~DWC3_EP_PENDING_REQUEST; } + return 0; } - return 0; + + if ((dep->flags & DWC3_EP_BUSY) && + !(dep->flags & DWC3_EP_MISSED_ISOC)) { + WARN_ON_ONCE(!dep->resource_index); + ret = __dwc3_gadget_kick_transfer(dep, + dep->resource_index); + } + + goto out; } if (!dwc3_calc_trbs_left(dep)) return 0; ret = __dwc3_gadget_kick_transfer(dep, 0); +out: if (ret == -EBUSY) ret = 0; -- cgit v1.2.1 From d325a1de49d61ee11aca58a529571c91ecea7879 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 11 May 2017 17:26:47 -0700 Subject: usb: dwc3: gadget: Prevent losing events in event cache The dwc3 driver can overwite its previous events if its top-half IRQ handler (TH) gets invoked again before processing the events in the cache. We see this as a hang in the file transfer and the host will attempt to reset the device. TH gets the event count and deasserts the interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If there's a new event coming between reading the event count and interrupt deassertion, dwc3 will lose previous pending events. More generally, we will see 0 event count, which should not affect anything. This shouldn't be possible in the current dwc3 implementation. However, through testing and reading the PCIe trace, the TH occasionally still gets invoked one more time after HW interrupt deassertion. (With PCIe legacy interrupts, TH is called repeatedly as long as the interrupt line is asserted). We suspect that there is a small detection delay in the SW. To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the events are processed in the bottom-half IRQ handler. If not, return IRQ_HANDLED and don't process new event. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3d6180805eb8..aea9a5b948b4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3036,6 +3036,15 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt) return IRQ_HANDLED; } + /* + * With PCIe legacy interrupt, test shows that top-half irq handler can + * be called again after HW interrupt deassertion. Check if bottom-half + * irq event handler completes before caching new event to prevent + * losing events. + */ + if (evt->flags & DWC3_EVENT_PENDING) + return IRQ_HANDLED; + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); count &= DWC3_GEVNTCOUNT_MASK; if (!count) -- cgit v1.2.1 From 844cf8a9d51f1d1e116d0bb18c353a2a94c70e79 Mon Sep 17 00:00:00 2001 From: Bogdan Mirea Date: Sun, 30 Apr 2017 13:21:26 +0300 Subject: usb: gadget: gserial: check if console kthread exists Check for bad pointer that may result because of kthread_create failure. This check is needed since the gserial setup callback function (gs_console_setup()) is only freeing the info->con_buf in case of kthread_create failure which will result into bad info->console_thread pointer. Without checking info->console_thread pointer validity in the gserial_console_exit() function, before calling kthread_stop(), the rmmod will generate Kernel Oops. Signed-off-by: Bogdan Mirea Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 000677c991b0..9b0805f55ad7 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -1256,7 +1256,7 @@ static void gserial_console_exit(void) struct gscons_info *info = &gscons_info; unregister_console(&gserial_cons); - if (info->console_thread != NULL) + if (!IS_ERR_OR_NULL(info->console_thread)) kthread_stop(info->console_thread); gs_buf_free(&info->con_buf); } -- cgit v1.2.1 From b7f73850bb4fac1e2209a4dd5e636d39be92f42c Mon Sep 17 00:00:00 2001 From: William Wu Date: Tue, 25 Apr 2017 17:45:48 +0800 Subject: usb: gadget: f_fs: avoid out of bounds access on comp_desc Companion descriptor is only used for SuperSpeed endpoints, if the endpoints are HighSpeed or FullSpeed, the Companion descriptor will not allocated, so we can only access it if gadget is SuperSpeed. I can reproduce this issue on Rockchip platform rk3368 SoC which supports USB 2.0, and use functionfs for ADB. Kernel build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report the following BUG: ================================================================== BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509 Read of size 1 by task swapper/0/0 ============================================================================ BUG kmalloc-256 (Not tainted): kasan: bad access detected ---------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1 alloc_debug_processing+0x128/0x17c ___slab_alloc.constprop.58+0x50c/0x610 __slab_alloc.isra.55.constprop.57+0x24/0x34 __kmalloc+0xe0/0x250 ffs_func_bind+0x52c/0x99c usb_add_function+0xd8/0x1d4 configfs_composite_bind+0x48c/0x570 udc_bind_to_driver+0x6c/0x170 usb_udc_attach_driver+0xa4/0xd0 gadget_dev_desc_UDC_store+0xcc/0x118 configfs_write_file+0x1a0/0x1f8 __vfs_write+0x64/0x174 vfs_write+0xe4/0x200 SyS_write+0x68/0xc8 el0_svc_naked+0x24/0x28 INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247 ... Call trace: [] dump_backtrace+0x0/0x230 [] show_stack+0x14/0x1c [] dump_stack+0xa0/0xc8 [] print_trailer+0x188/0x198 [] object_err+0x3c/0x4c [] kasan_report+0x324/0x4dc [] __asan_load1+0x24/0x50 [] ffs_func_set_alt+0x224/0x3a0 [] composite_setup+0xdcc/0x1ac8 [] android_setup+0x124/0x1a0 [] _setup+0x54/0x74 [] handle_ep0+0x3288/0x4390 [] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4 [] dwc_otg_pcd_handle_intr+0x1ec/0x298 [] dwc_otg_pcd_irq+0x10/0x20 [] handle_irq_event_percpu+0x124/0x3ac [] handle_irq_event+0x60/0xa0 [] handle_fasteoi_irq+0x10c/0x1d4 [] generic_handle_irq+0x30/0x40 [] __handle_domain_irq+0xac/0xdc [] gic_handle_irq+0x64/0xa4 ... Memory state around the buggy address: ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: William Wu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 71dd27c0d7f2..47dda3450abd 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1858,12 +1858,12 @@ static int ffs_func_eps_enable(struct ffs_function *func) ep->ep->driver_data = ep; ep->ep->desc = ds; - comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + - USB_DT_ENDPOINT_SIZE); - ep->ep->maxburst = comp_desc->bMaxBurst + 1; - - if (needs_comp_desc) + if (needs_comp_desc) { + comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + + USB_DT_ENDPOINT_SIZE); + ep->ep->maxburst = comp_desc->bMaxBurst + 1; ep->ep->comp_desc = comp_desc; + } ret = usb_ep_enable(ep->ep); if (likely(!ret)) { -- cgit v1.2.1 From 018047a1dba7636e1f7fdae2cc290a528991d648 Mon Sep 17 00:00:00 2001 From: Pan Bian Date: Sun, 23 Apr 2017 13:55:13 +0800 Subject: usb: dwc3: keystone: check return value Function devm_clk_get() returns an ERR_PTR when it fails. However, in function kdwc3_probe(), its return value is not checked, which may result in a bad memory access bug. This patch fixes the bug. Signed-off-by: Pan Bian Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-keystone.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c index 72664700b8a2..12ee23f53cdd 100644 --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -107,6 +107,10 @@ static int kdwc3_probe(struct platform_device *pdev) return PTR_ERR(kdwc->usbss); kdwc->clk = devm_clk_get(kdwc->dev, "usb"); + if (IS_ERR(kdwc->clk)) { + dev_err(kdwc->dev, "unable to get usb clock\n"); + return PTR_ERR(kdwc->clk); + } error = clk_prepare_enable(kdwc->clk); if (error < 0) { -- cgit v1.2.1 From f0d39a179b9cd38c739acfc4f92720a0c79e1d66 Mon Sep 17 00:00:00 2001 From: Rui Miguel Silva Date: Fri, 12 May 2017 21:16:14 +0100 Subject: staging: typec: fusb302: reset i2c_busy state in error Fix reset of i2c_busy flag if an error occurs during the i2c block read. Signed-off-by: Rui Miguel Silva Acked-by: Yueyao Zhu Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/fusb302/fusb302.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index 6bd602db11be..7b0b9e51016d 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -365,13 +365,15 @@ static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address, if (ret < 0) { fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d", address, length, ret); - return ret; + goto done; } if (ret != length) { fusb302_log(chip, "only read %d/%d bytes from 0x%02x", ret, length, address); - return -EIO; + ret = -EIO; } + +done: atomic_set(&chip->i2c_busy, 0); return ret; -- cgit v1.2.1 From 50b7c322cfc8b44a36b1373dab2177db23e3282c Mon Sep 17 00:00:00 2001 From: Rui Miguel Silva Date: Fri, 12 May 2017 21:16:15 +0100 Subject: staging: typec: fusb302: refactor resume retry mechanism The i2c functions need to test the pm_suspend state and do, if needed, some retry before i2c operations. This code was repeated 4x. To isolate this, create a new function to check suspend state and call it in every need place. As at it, move the error message from pr_err to dev_err. Signed-off-by: Rui Miguel Silva Acked-by: Yueyao Zhu Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/staging/typec/fusb302/fusb302.c | 70 +++++++++++++++++---------------- 1 file changed, 36 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index 7b0b9e51016d..4a356e509fe4 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -264,22 +264,36 @@ static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { } #define FUSB302_RESUME_RETRY 10 #define FUSB302_RESUME_RETRY_SLEEP 50 -static int fusb302_i2c_write(struct fusb302_chip *chip, - u8 address, u8 data) + +static bool fusb302_is_suspended(struct fusb302_chip *chip) { int retry_cnt; - int ret = 0; - atomic_set(&chip->i2c_busy, 1); for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { if (atomic_read(&chip->pm_suspend)) { - pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", - retry_cnt + 1, FUSB302_RESUME_RETRY); + dev_err(chip->dev, "i2c: pm suspend, retry %d/%d\n", + retry_cnt + 1, FUSB302_RESUME_RETRY); msleep(FUSB302_RESUME_RETRY_SLEEP); } else { - break; + return false; } } + + return true; +} + +static int fusb302_i2c_write(struct fusb302_chip *chip, + u8 address, u8 data) +{ + int ret = 0; + + atomic_set(&chip->i2c_busy, 1); + + if (fusb302_is_suspended(chip)) { + atomic_set(&chip->i2c_busy, 0); + return -ETIMEDOUT; + } + ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data); if (ret < 0) fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d", @@ -292,21 +306,17 @@ static int fusb302_i2c_write(struct fusb302_chip *chip, static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address, u8 length, const u8 *data) { - int retry_cnt; int ret = 0; if (length <= 0) return ret; atomic_set(&chip->i2c_busy, 1); - for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { - if (atomic_read(&chip->pm_suspend)) { - pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", - retry_cnt + 1, FUSB302_RESUME_RETRY); - msleep(FUSB302_RESUME_RETRY_SLEEP); - } else { - break; - } + + if (fusb302_is_suspended(chip)) { + atomic_set(&chip->i2c_busy, 0); + return -ETIMEDOUT; } + ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address, length, data); if (ret < 0) @@ -320,19 +330,15 @@ static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address, static int fusb302_i2c_read(struct fusb302_chip *chip, u8 address, u8 *data) { - int retry_cnt; int ret = 0; atomic_set(&chip->i2c_busy, 1); - for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { - if (atomic_read(&chip->pm_suspend)) { - pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", - retry_cnt + 1, FUSB302_RESUME_RETRY); - msleep(FUSB302_RESUME_RETRY_SLEEP); - } else { - break; - } + + if (fusb302_is_suspended(chip)) { + atomic_set(&chip->i2c_busy, 0); + return -ETIMEDOUT; } + ret = i2c_smbus_read_byte_data(chip->i2c_client, address); *data = (u8)ret; if (ret < 0) @@ -345,21 +351,17 @@ static int fusb302_i2c_read(struct fusb302_chip *chip, static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address, u8 length, u8 *data) { - int retry_cnt; int ret = 0; if (length <= 0) return ret; atomic_set(&chip->i2c_busy, 1); - for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) { - if (atomic_read(&chip->pm_suspend)) { - pr_err("fusb302_i2c: pm suspend, retry %d/%d\n", - retry_cnt + 1, FUSB302_RESUME_RETRY); - msleep(FUSB302_RESUME_RETRY_SLEEP); - } else { - break; - } + + if (fusb302_is_suspended(chip)) { + atomic_set(&chip->i2c_busy, 0); + return -ETIMEDOUT; } + ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address, length, data); if (ret < 0) { -- cgit v1.2.1 From b72d7451209a0bad4264f5f4cb389e7f71cc5ad4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 16 May 2017 13:30:05 +0200 Subject: staging: fsl-dpaa2/eth: add ETHERNET dependency The new driver cannot link correctly when the netdevice infrastructure is disabled: ERROR: "netdev_info" [drivers/staging/fsl-dpaa2/ethernet/fsl-dpaa2-eth.ko] undefined! ERROR: "skb_to_sgvec" [drivers/staging/fsl-dpaa2/ethernet/fsl-dpaa2-eth.ko] undefined! ERROR: "napi_disable" [drivers/staging/fsl-dpaa2/ethernet/fsl-dpaa2-eth.ko] undefined! ERROR: "napi_schedule_prep" [drivers/staging/fsl-dpaa2/ethernet/fsl-dpaa2-eth.ko] undefined! ERROR: "__napi_schedule_irqoff" [drivers/staging/fsl-dpaa2/ethernet/fsl-dpaa2-eth.ko] undefined! ERROR: "netif_carrier_on" [drivers/staging/fsl-dpaa2/ethernet/fsl-dpaa2-eth.ko] undefined! This adds a dependency on NETDEVICES and ETHERNET. Fixes: 0352d1d85201 ("staging: fsl-dpaa2/eth: Add APIs for DPNI objects") Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fsl-dpaa2/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/fsl-dpaa2/Kconfig b/drivers/staging/fsl-dpaa2/Kconfig index 2e325cb747ae..730fd6d4db33 100644 --- a/drivers/staging/fsl-dpaa2/Kconfig +++ b/drivers/staging/fsl-dpaa2/Kconfig @@ -12,6 +12,7 @@ config FSL_DPAA2 config FSL_DPAA2_ETH tristate "Freescale DPAA2 Ethernet" depends on FSL_DPAA2 && FSL_MC_DPIO + depends on NETDEVICES && ETHERNET ---help--- Ethernet driver for Freescale DPAA2 SoCs, using the Freescale MC bus driver -- cgit v1.2.1 From aff523fb82696f59b197ea79ea3652c216dbe4c0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 5 May 2017 15:37:06 -0700 Subject: memory: omap-gpmc: Fix debug output for access width The width needs to be configured in bytes with 1 meaning 8-bit access and 2 meaning 16-bit access. Cc: Peter Ujfalusi Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- drivers/memory/omap-gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index bf0fe0137dfe..6d1b4b707cc2 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -512,7 +512,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc) pr_info("gpmc cs%i access configuration:\n", cs); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity"); GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data"); - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13, + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1, GPMC_CONFIG1_DEVICESIZE_MAX, "device-width"); GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write"); -- cgit v1.2.1 From 6f61dd3aa35179043f1fcdb0965c5d56278ab724 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 12 May 2017 14:52:34 -0700 Subject: efi-pstore: Fix read iter after pstore API refactor During the internal pstore API refactoring, the EFI vars read entry was accidentally made to update a stack variable instead of the pstore private data pointer. This corrects the problem (and removes the now needless argument). Fixes: 125cc42baf8a ("pstore: Replace arguments for read() API") Signed-off-by: Kees Cook --- drivers/firmware/efi/efi-pstore.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 93d8cdbe7ef4..44148fd4c9f2 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -155,19 +155,14 @@ static int efi_pstore_scan_sysfs_exit(struct efivar_entry *pos, * efi_pstore_sysfs_entry_iter * * @record: pstore record to pass to callback - * @pos: entry to begin iterating from * * You MUST call efivar_enter_iter_begin() before this function, and * efivar_entry_iter_end() afterwards. * - * It is possible to begin iteration from an arbitrary entry within - * the list by passing @pos. @pos is updated on return to point to - * the next entry of the last one passed to efi_pstore_read_func(). - * To begin iterating from the beginning of the list @pos must be %NULL. */ -static int efi_pstore_sysfs_entry_iter(struct pstore_record *record, - struct efivar_entry **pos) +static int efi_pstore_sysfs_entry_iter(struct pstore_record *record) { + struct efivar_entry **pos = (struct efivar_entry **)&record->psi->data; struct efivar_entry *entry, *n; struct list_head *head = &efivar_sysfs_list; int size = 0; @@ -218,7 +213,6 @@ static int efi_pstore_sysfs_entry_iter(struct pstore_record *record, */ static ssize_t efi_pstore_read(struct pstore_record *record) { - struct efivar_entry *entry = (struct efivar_entry *)record->psi->data; ssize_t size; record->buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL); @@ -229,7 +223,7 @@ static ssize_t efi_pstore_read(struct pstore_record *record) size = -EINTR; goto out; } - size = efi_pstore_sysfs_entry_iter(record, &entry); + size = efi_pstore_sysfs_entry_iter(record); efivar_entry_iter_end(); out: -- cgit v1.2.1 From 13840d38016203f0095cd547b90352812d24b787 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 30 Apr 2017 17:32:28 -0400 Subject: dm bufio: make the parameter "retain_bytes" unsigned long Change the type of the parameter "retain_bytes" from unsigned to unsigned long, so that on 64-bit machines the user can set more than 4GiB of data to be retained. Also, change the type of the variable "count" in the function "__evict_old_buffers" to unsigned long. The assignment "count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];" could result in unsigned long to unsigned overflow and that could result in buffers not being freed when they should. While at it, avoid division in get_retain_buffers(). Division is slow, we can change it to shift because we have precalculated the log2 of block size. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-bufio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index 5db11a405129..cd8139593ccd 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -218,7 +218,7 @@ static DEFINE_SPINLOCK(param_spinlock); * Buffers are freed after this timeout */ static unsigned dm_bufio_max_age = DM_BUFIO_DEFAULT_AGE_SECS; -static unsigned dm_bufio_retain_bytes = DM_BUFIO_DEFAULT_RETAIN_BYTES; +static unsigned long dm_bufio_retain_bytes = DM_BUFIO_DEFAULT_RETAIN_BYTES; static unsigned long dm_bufio_peak_allocated; static unsigned long dm_bufio_allocated_kmem_cache; @@ -1558,10 +1558,10 @@ static bool __try_evict_buffer(struct dm_buffer *b, gfp_t gfp) return true; } -static unsigned get_retain_buffers(struct dm_bufio_client *c) +static unsigned long get_retain_buffers(struct dm_bufio_client *c) { - unsigned retain_bytes = ACCESS_ONCE(dm_bufio_retain_bytes); - return retain_bytes / c->block_size; + unsigned long retain_bytes = ACCESS_ONCE(dm_bufio_retain_bytes); + return retain_bytes >> (c->sectors_per_block_bits + SECTOR_SHIFT); } static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan, @@ -1571,7 +1571,7 @@ static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan, struct dm_buffer *b, *tmp; unsigned long freed = 0; unsigned long count = nr_to_scan; - unsigned retain_target = get_retain_buffers(c); + unsigned long retain_target = get_retain_buffers(c); for (l = 0; l < LIST_SIZE; l++) { list_for_each_entry_safe_reverse(b, tmp, &c->lru[l], lru_list) { @@ -1794,8 +1794,8 @@ static bool older_than(struct dm_buffer *b, unsigned long age_hz) static void __evict_old_buffers(struct dm_bufio_client *c, unsigned long age_hz) { struct dm_buffer *b, *tmp; - unsigned retain_target = get_retain_buffers(c); - unsigned count; + unsigned long retain_target = get_retain_buffers(c); + unsigned long count; LIST_HEAD(write_list); dm_bufio_lock(c); @@ -1955,7 +1955,7 @@ MODULE_PARM_DESC(max_cache_size_bytes, "Size of metadata cache"); module_param_named(max_age_seconds, dm_bufio_max_age, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(max_age_seconds, "Max age of a buffer in seconds"); -module_param_named(retain_bytes, dm_bufio_retain_bytes, uint, S_IRUGO | S_IWUSR); +module_param_named(retain_bytes, dm_bufio_retain_bytes, ulong, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(retain_bytes, "Try to keep at least this many bytes cached in memory"); module_param_named(peak_allocated_bytes, dm_bufio_peak_allocated, ulong, S_IRUGO | S_IWUSR); -- cgit v1.2.1 From 2432a3fb5cff026005aaad24e42226402f7fd0aa Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 16 May 2017 13:27:49 +0200 Subject: mlx5e: add CONFIG_INET dependency We now reference the arp_tbl, which requires IPv4 support to be enabled in the kernel, otherwise we get a link error: drivers/net/built-in.o: In function `mlx5e_tc_update_neigh_used_value': (.text+0x16afec): undefined reference to `arp_tbl' drivers/net/built-in.o: In function `mlx5e_rep_neigh_init': en_rep.c:(.text+0x16c16d): undefined reference to `arp_tbl' drivers/net/built-in.o: In function `mlx5e_rep_netevent_event': en_rep.c:(.text+0x16cbb5): undefined reference to `arp_tbl' This adds a Kconfig dependency for it. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index fc52d742b7f7..27251a78075c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -13,7 +13,7 @@ config MLX5_CORE config MLX5_CORE_EN bool "Mellanox Technologies ConnectX-4 Ethernet support" - depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE + depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE depends on IPV6=y || IPV6=n || MLX5_CORE=m imply PTP_1588_CLOCK default n -- cgit v1.2.1 From 3e21f4af170bebf47c187c1ff8bf155583c9f3b1 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Tue, 16 May 2017 19:18:55 +0200 Subject: char: lp: fix possible integer overflow in lp_setup() The lp_setup() code doesn't apply any bounds checking when passing "lp=none", and only in this case, resulting in an overflow of the parport_nr[] array. All versions in Git history are affected. Reported-By: Roee Hay Cc: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Willy Tarreau Signed-off-by: Greg Kroah-Hartman --- drivers/char/lp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 565e4cf04a02..8249762192d5 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -859,7 +859,11 @@ static int __init lp_setup (char *str) } else if (!strcmp(str, "auto")) { parport_nr[0] = LP_PARPORT_AUTO; } else if (!strcmp(str, "none")) { - parport_nr[parport_ptr++] = LP_PARPORT_NONE; + if (parport_ptr < LP_NO) + parport_nr[parport_ptr++] = LP_PARPORT_NONE; + else + printk(KERN_INFO "lp: too many ports, %s ignored.\n", + str); } else if (!strcmp(str, "reset")) { reset = 1; } -- cgit v1.2.1 From a20cfc1cde76047657045fc5976834f57422a8c5 Mon Sep 17 00:00:00 2001 From: Tobias Regnery Date: Tue, 9 May 2017 13:52:02 +0200 Subject: misc: pci_endpoint_test: select CRC32 There is the following link error with CONFIG_PCI_ENDPOINT_TEST=y and CONFIG_CRC32=m: drivers/built-in.o: In function 'pci_endpoint_test_ioctl': pci_endpoint_test.c:(.text+0xf1251): undefined reference to 'crc32_le' pci_endpoint_test.c:(.text+0xf1322): undefined reference to 'crc32_le' pci_endpoint_test.c:(.text+0xf13b2): undefined reference to 'crc32_le' pci_endpoint_test.c:(.text+0xf141e): undefined reference to 'crc32_le' Fix this by selecting CRC32 in the PCI_ENDPOINT_TEST kconfig entry. Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Signed-off-by: Tobias Regnery Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 2cba76e6fa3c..07bbd4cc1852 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -492,6 +492,7 @@ config ASPEED_LPC_CTRL config PCI_ENDPOINT_TEST depends on PCI + select CRC32 tristate "PCI Endpoint Test driver" ---help--- Enable this configuration option to enable the host side test driver -- cgit v1.2.1 From 0d83539092ddb1ab79b4d65bccb866bf07ea2ccd Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 9 May 2017 18:58:24 -0500 Subject: uio: fix incorrect memory leak cleanup Commit 75f0aef6220d ("uio: fix memory leak") has fixed up some memory leaks during the failure paths of the addition of uio attributes, but still is not correct entirely. A kobject_uevent() failure still needs a kobject_put() and the kobject container structure allocation failure before the kobject_init() doesn't need a kobject_put(). Fix this properly. Fixes: 75f0aef6220d ("uio: fix memory leak") Signed-off-by: Suman Anna Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 1c196f87e9d9..ff04b7f8549f 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -279,7 +279,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) map = kzalloc(sizeof(*map), GFP_KERNEL); if (!map) { ret = -ENOMEM; - goto err_map_kobj; + goto err_map; } kobject_init(&map->kobj, &map_attr_type); map->mem = mem; @@ -289,7 +289,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) goto err_map_kobj; ret = kobject_uevent(&map->kobj, KOBJ_ADD); if (ret) - goto err_map; + goto err_map_kobj; } for (pi = 0; pi < MAX_UIO_PORT_REGIONS; pi++) { @@ -308,7 +308,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) portio = kzalloc(sizeof(*portio), GFP_KERNEL); if (!portio) { ret = -ENOMEM; - goto err_portio_kobj; + goto err_portio; } kobject_init(&portio->kobj, &portio_attr_type); portio->port = port; @@ -319,7 +319,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) goto err_portio_kobj; ret = kobject_uevent(&portio->kobj, KOBJ_ADD); if (ret) - goto err_portio; + goto err_portio_kobj; } return 0; -- cgit v1.2.1 From 88ad60c23a394b2f8bf1e570c756f415435d1d35 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 16 May 2017 14:07:24 +0200 Subject: i2c: mv64xxx: don't override deferred probing when getting irq There is no reason to use platform_get_irq() for non-DT probing and irq_of_parse_and_map() for DT probing. Indeed, platform_get_irq() works fine for both. In addition, using platform_get_irq() properly returns -EPROBE_DEFER when the interrupt controller is not yet available, so instead of inventing our own error code (-ENXIO), return the one provided by platform_get_irq(). Signed-off-by: Thomas Petazzoni Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mv64xxx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index cf737ec8563b..5c4db65c5019 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -819,7 +819,6 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, rc = -EINVAL; goto out; } - drv_data->irq = irq_of_parse_and_map(np, 0); drv_data->rstc = devm_reset_control_get_optional(dev, NULL); if (IS_ERR(drv_data->rstc)) { @@ -902,10 +901,11 @@ mv64xxx_i2c_probe(struct platform_device *pd) if (!IS_ERR(drv_data->clk)) clk_prepare_enable(drv_data->clk); + drv_data->irq = platform_get_irq(pd, 0); + if (pdata) { drv_data->freq_m = pdata->freq_m; drv_data->freq_n = pdata->freq_n; - drv_data->irq = platform_get_irq(pd, 0); drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); drv_data->offload_enabled = false; memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets)); @@ -915,7 +915,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_clk; } if (drv_data->irq < 0) { - rc = -ENXIO; + rc = drv_data->irq; goto exit_reset; } -- cgit v1.2.1 From 9a2eba337cacefc95b97c2726e3efdd435b3460e Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 15 May 2017 12:04:31 +0300 Subject: drm/nouveau: Fix drm poll_helper handling Commit cae9ff036eea effectively disabled the drm poll_helper by checking the wrong flag to see if the driver should enable the poll or not: mode_config.poll_enabled is only set to true by poll_init and it is not indicating if the poll is enabled or not. nouveau_display_create() will initialize the poll and going to disable it right away. After poll_init() the mode_config.poll_enabled will be true, but the poll itself is disabled. To avoid the race caused by calling the poll_enable() from different paths, this patch will enable the poll from one place, in the nouveau_display_hpd_work(). In case the pm_runtime is disabled we will enable the poll in nouveau_drm_load() once. Fixes: cae9ff036eea ("drm/nouveau: Don't enabling polling twice on runtime resume") Signed-off-by: Peter Ujfalusi Reviewed-by: Lyude Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 6 ++---- drivers/gpu/drm/nouveau/nouveau_drm.c | 6 +++--- 2 files changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 21b10f9840c9..549763f5e17d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -360,6 +360,8 @@ nouveau_display_hpd_work(struct work_struct *work) pm_runtime_get_sync(drm->dev->dev); drm_helper_hpd_irq_event(drm->dev); + /* enable polling for external displays */ + drm_kms_helper_poll_enable(drm->dev); pm_runtime_mark_last_busy(drm->dev->dev); pm_runtime_put_sync(drm->dev->dev); @@ -413,10 +415,6 @@ nouveau_display_init(struct drm_device *dev) if (ret) return ret; - /* enable polling for external displays */ - if (!dev->mode_config.poll_enabled) - drm_kms_helper_poll_enable(dev); - /* enable hotplug interrupts */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct nouveau_connector *conn = nouveau_connector(connector); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 2b6ac24ce690..36268e1802b5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -502,6 +502,9 @@ nouveau_drm_load(struct drm_device *dev, unsigned long flags) pm_runtime_allow(dev->dev); pm_runtime_mark_last_busy(dev->dev); pm_runtime_put(dev->dev); + } else { + /* enable polling for external displays */ + drm_kms_helper_poll_enable(dev); } return 0; @@ -774,9 +777,6 @@ nouveau_pmops_runtime_resume(struct device *dev) ret = nouveau_do_resume(drm_dev, true); - if (!drm_dev->mode_config.poll_enabled) - drm_kms_helper_poll_enable(drm_dev); - /* do magic */ nvif_mask(&device->object, 0x088488, (1 << 25), (1 << 25)); vga_switcheroo_set_dynamic_switch(pdev, VGA_SWITCHEROO_ON); -- cgit v1.2.1 From 563ad2b640955a0da21aedce1aaa332c7d016dde Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 8 May 2017 14:30:43 +0200 Subject: drm/nouveau/secboot: plug memory leak in ls_ucode_img_load_gr() error path The last goto looks spurious because it releases less resources than the previous one. Also free 'img->sig' if 'ls_ucode_img_build()' fails. Fixes: 9d896f3e41a6 ("drm/nouveau/secboot: abstract LS firmware loading functions") Signed-off-by: Christophe JAILLET Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/secboot/ls_ucode_gr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/ls_ucode_gr.c b/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/ls_ucode_gr.c index d1cf02d22db1..1b0c793c0192 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/ls_ucode_gr.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/secboot/ls_ucode_gr.c @@ -116,6 +116,7 @@ ls_ucode_img_load_gr(const struct nvkm_subdev *subdev, struct ls_ucode_img *img, ret = nvkm_firmware_get(subdev->device, f, &sig); if (ret) goto free_data; + img->sig = kmemdup(sig->data, sig->size, GFP_KERNEL); if (!img->sig) { ret = -ENOMEM; @@ -126,8 +127,9 @@ ls_ucode_img_load_gr(const struct nvkm_subdev *subdev, struct ls_ucode_img *img, img->ucode_data = ls_ucode_img_build(bl, code, data, &img->ucode_desc); if (IS_ERR(img->ucode_data)) { + kfree(img->sig); ret = PTR_ERR(img->ucode_data); - goto free_data; + goto free_sig; } img->ucode_size = img->ucode_desc.image_size; -- cgit v1.2.1 From 2579b8b0ece53248b815042f8662a4531acf120d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 27 Apr 2017 12:12:56 +0300 Subject: drm/nouveau/fifo/gk104-: Silence a locking warning Presumably we can never actually hit this return, but static checkers complain that we should unlock before we return. Signed-off-by: Dan Carpenter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c index 3a24788c3185..a7e55c422501 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c @@ -148,7 +148,7 @@ gk104_fifo_runlist_commit(struct gk104_fifo *fifo, int runl) case NVKM_MEM_TARGET_NCOH: target = 3; break; default: WARN_ON(1); - return; + goto unlock; } nvkm_wr32(device, 0x002270, (nvkm_memory_addr(mem) >> 12) | @@ -160,6 +160,7 @@ gk104_fifo_runlist_commit(struct gk104_fifo *fifo, int runl) & 0x00100000), msecs_to_jiffies(2000)) == 0) nvkm_error(subdev, "runlist %d update timeout\n", runl); +unlock: mutex_unlock(&subdev->mutex); } -- cgit v1.2.1 From 83345d51a49a4b3f3b4a08a5db644dae438b0189 Mon Sep 17 00:00:00 2001 From: Tin Huynh Date: Wed, 17 May 2017 11:25:34 +0700 Subject: i2c: xgene: Set ACPI_COMPANION_I2C With ACPI, i2c-core requires ACPI companion to be set in order for it to create slave device. This patch sets the ACPI companion accordingly. Signed-off-by: Tin Huynh Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xgene-slimpro.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index dbe7e44c9321..6ba6c83ca8f1 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -416,6 +416,7 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev) adapter->class = I2C_CLASS_HWMON; adapter->dev.parent = &pdev->dev; adapter->dev.of_node = pdev->dev.of_node; + ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev)); i2c_set_adapdata(adapter, ctx); rc = i2c_add_adapter(adapter); if (rc) { -- cgit v1.2.1 From 5f63424ab7daac840df2b12dd5bcc5b38d50f779 Mon Sep 17 00:00:00 2001 From: Andrey Korolyov Date: Tue, 16 May 2017 23:54:41 +0300 Subject: USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs This patch adds support for recognition of ARM-USB-TINY(H) devices which are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack and serial console. By suggestion from Johan Hovold it is possible to replace ftdi_jtag_quirk with a bit more generic construction. Since all Olimex-ARM debuggers has exactly two ports, we could safely always use only second port within the debugger family. Signed-off-by: Andrey Korolyov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 8 ++++---- drivers/usb/serial/ftdi_sio_ids.h | 2 ++ 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0e634c11abbf..aba74f817dc6 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -809,10 +809,10 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), - .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), - .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) }, { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 71fb9e59db71..4fcf1cecb6d7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -882,6 +882,8 @@ /* Olimex */ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 +#define OLIMEX_ARM_USB_TINY_PID 0x0004 +#define OLIMEX_ARM_USB_TINY_H_PID 0x002a #define OLIMEX_ARM_USB_OCD_H_PID 0x002b /* -- cgit v1.2.1 From 628c2893d44876ddd11602400c70606ade62e129 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 16 May 2017 11:47:29 -0400 Subject: USB: ene_usb6250: fix DMA to the stack The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by: Alan Stern Reported-and-tested-by: Andreas Hartmann CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/ene_ub6250.c | 90 ++++++++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 369f3c24815a..44af719194b2 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -446,6 +446,10 @@ struct ms_lib_ctrl { #define SD_BLOCK_LEN 9 struct ene_ub6250_info { + + /* I/O bounce buffer */ + u8 *bbuf; + /* for 6250 code */ struct SD_STATUS SD_Status; struct MS_STATUS MS_Status; @@ -493,8 +497,11 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag); static void ene_ub6250_info_destructor(void *extra) { + struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra; + if (!extra) return; + kfree(info->bbuf); } static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) @@ -860,8 +867,9 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; int result; - u8 ExtBuf[4]; u32 bn = PhyBlockAddr * 0x20 + PageNum; result = ene_load_bincode(us, MS_RW_PATTERN); @@ -901,7 +909,7 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16); bcb->CDB[6] = 0x01; - result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -910,9 +918,9 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr, ExtraDat->status0 = 0x10; /* Not yet,fireware support */ ExtraDat->status1 = 0x00; /* Not yet,fireware support */ - ExtraDat->ovrflg = ExtBuf[0]; - ExtraDat->mngflg = ExtBuf[1]; - ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]); + ExtraDat->ovrflg = bbuf[0]; + ExtraDat->mngflg = bbuf[1]; + ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]); return USB_STOR_TRANSPORT_GOOD; } @@ -1332,8 +1340,9 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, u8 PageNum, struct ms_lib_type_extdat *ExtraDat) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; int result; - u8 ExtBuf[4]; memset(bcb, 0, sizeof(struct bulk_cb_wrap)); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); @@ -1347,7 +1356,7 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, bcb->CDB[2] = (unsigned char)(PhyBlock>>16); bcb->CDB[6] = 0x01; - result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -1355,9 +1364,9 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock, ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */ ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */ ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */ - ExtraDat->ovrflg = ExtBuf[0]; - ExtraDat->mngflg = ExtBuf[1]; - ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]); + ExtraDat->ovrflg = bbuf[0]; + ExtraDat->mngflg = bbuf[1]; + ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]); return USB_STOR_TRANSPORT_GOOD; } @@ -1556,9 +1565,9 @@ static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st) u16 PhyBlock, newblk, i; u16 LogStart, LogEnde; struct ms_lib_type_extdat extdat; - u8 buf[0x200]; u32 count = 0, index = 0; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) { ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde); @@ -1572,14 +1581,16 @@ static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st) } if (count == PhyBlock) { - ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf); + ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, + bbuf); count += 0x80; } index = (PhyBlock % 0x80) * 4; - extdat.ovrflg = buf[index]; - extdat.mngflg = buf[index+1]; - extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]); + extdat.ovrflg = bbuf[index]; + extdat.mngflg = bbuf[index+1]; + extdat.logadr = memstick_logaddr(bbuf[index+2], + bbuf[index+3]); if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) { ms_lib_setacquired_errorblock(us, PhyBlock); @@ -2062,9 +2073,9 @@ static int ene_ms_init(struct us_data *us) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; int result; - u8 buf[0x200]; u16 MSP_BlockSize, MSP_UserAreaBlocks; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; printk(KERN_INFO "transport --- ENE_MSInit\n"); @@ -2083,13 +2094,13 @@ static int ene_ms_init(struct us_data *us) bcb->CDB[0] = 0xF1; bcb->CDB[1] = 0x01; - result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) { printk(KERN_ERR "Execution MS Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } /* the same part to test ENE */ - info->MS_Status = *(struct MS_STATUS *)&buf[0]; + info->MS_Status = *(struct MS_STATUS *) bbuf; if (info->MS_Status.Insert && info->MS_Status.Ready) { printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert); @@ -2098,15 +2109,15 @@ static int ene_ms_init(struct us_data *us) printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG); printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP); if (info->MS_Status.IsMSPro) { - MSP_BlockSize = (buf[6] << 8) | buf[7]; - MSP_UserAreaBlocks = (buf[10] << 8) | buf[11]; + MSP_BlockSize = (bbuf[6] << 8) | bbuf[7]; + MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11]; info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks; } else { ms_card_init(us); /* Card is MS (to ms.c)*/ } usb_stor_dbg(us, "MS Init Code OK !!\n"); } else { - usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]); return USB_STOR_TRANSPORT_ERROR; } @@ -2116,9 +2127,9 @@ static int ene_ms_init(struct us_data *us) static int ene_sd_init(struct us_data *us) { int result; - u8 buf[0x200]; struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + u8 *bbuf = info->bbuf; usb_stor_dbg(us, "transport --- ENE_SDInit\n"); /* SD Init Part-1 */ @@ -2152,17 +2163,17 @@ static int ene_sd_init(struct us_data *us) bcb->Flags = US_BULK_FLAG_IN; bcb->CDB[0] = 0xF1; - result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); + result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0); if (result != USB_STOR_XFER_GOOD) { usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } - info->SD_Status = *(struct SD_STATUS *)&buf[0]; + info->SD_Status = *(struct SD_STATUS *) bbuf; if (info->SD_Status.Insert && info->SD_Status.Ready) { struct SD_STATUS *s = &info->SD_Status; - ene_get_card_status(us, (unsigned char *)&buf); + ene_get_card_status(us, bbuf); usb_stor_dbg(us, "Insert = %x\n", s->Insert); usb_stor_dbg(us, "Ready = %x\n", s->Ready); usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC); @@ -2170,7 +2181,7 @@ static int ene_sd_init(struct us_data *us) usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed); usb_stor_dbg(us, "WtP = %x\n", s->WtP); } else { - usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]); return USB_STOR_TRANSPORT_ERROR; } return USB_STOR_TRANSPORT_GOOD; @@ -2180,13 +2191,15 @@ static int ene_sd_init(struct us_data *us) static int ene_init(struct us_data *us) { int result; - u8 misc_reg03 = 0; + u8 misc_reg03; struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); + u8 *bbuf = info->bbuf; - result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03); + result = ene_get_card_type(us, REG_CARD_STATUS, bbuf); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; + misc_reg03 = bbuf[0]; if (misc_reg03 & 0x01) { if (!info->SD_Status.Ready) { result = ene_sd_init(us); @@ -2303,8 +2316,9 @@ static int ene_ub6250_probe(struct usb_interface *intf, const struct usb_device_id *id) { int result; - u8 misc_reg03 = 0; + u8 misc_reg03; struct us_data *us; + struct ene_ub6250_info *info; result = usb_stor_probe1(&us, intf, id, (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list, @@ -2313,11 +2327,16 @@ static int ene_ub6250_probe(struct usb_interface *intf, return result; /* FIXME: where should the code alloc extra buf ? */ - if (!us->extra) { - us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL); - if (!us->extra) - return -ENOMEM; - us->extra_destructor = ene_ub6250_info_destructor; + us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL); + if (!us->extra) + return -ENOMEM; + us->extra_destructor = ene_ub6250_info_destructor; + + info = (struct ene_ub6250_info *)(us->extra); + info->bbuf = kmalloc(512, GFP_KERNEL); + if (!info->bbuf) { + kfree(us->extra); + return -ENOMEM; } us->transport_name = "ene_ub6250"; @@ -2329,12 +2348,13 @@ static int ene_ub6250_probe(struct usb_interface *intf, return result; /* probe card type */ - result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03); + result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf); if (result != USB_STOR_XFER_GOOD) { usb_stor_disconnect(intf); return USB_STOR_TRANSPORT_ERROR; } + misc_reg03 = info->bbuf[0]; if (!(misc_reg03 & 0x01)) { pr_info("ums_eneub6250: This driver only supports SD/MS cards. " "It does not support SM cards.\n"); -- cgit v1.2.1 From 2f964780c03b73de269b08d12aff96a9618d13f3 Mon Sep 17 00:00:00 2001 From: Vamsi Krishna Samavedam Date: Tue, 16 May 2017 14:38:08 +0200 Subject: USB: core: replace %p with %pK Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by: Vamsi Krishna Samavedam Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 14 +++++++------- drivers/usb/core/hcd.c | 4 ++-- drivers/usb/core/urb.c | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index cfc3cff6e8d5..8e6ef671be9b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -475,11 +475,11 @@ static void snoop_urb(struct usb_device *udev, if (userurb) { /* Async */ if (when == SUBMIT) - dev_info(&udev->dev, "userurb %p, ep%d %s-%s, " + dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, " "length %u\n", userurb, ep, t, d, length); else - dev_info(&udev->dev, "userurb %p, ep%d %s-%s, " + dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, " "actual_length %u status %d\n", userurb, ep, t, d, length, timeout_or_status); @@ -1895,7 +1895,7 @@ static int proc_reapurb(struct usb_dev_state *ps, void __user *arg) if (as) { int retval; - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl(as, (void __user * __user *)arg); free_async(as); return retval; @@ -1912,7 +1912,7 @@ static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg) as = async_getcompleted(ps); if (as) { - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl(as, (void __user * __user *)arg); free_async(as); } else { @@ -2043,7 +2043,7 @@ static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg) if (as) { int retval; - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl_compat(as, (void __user * __user *)arg); free_async(as); return retval; @@ -2060,7 +2060,7 @@ static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *ar as = async_getcompleted(ps); if (as) { - snoop(&ps->dev->dev, "reap %p\n", as->userurb); + snoop(&ps->dev->dev, "reap %pK\n", as->userurb); retval = processcompl_compat(as, (void __user * __user *)arg); free_async(as); } else { @@ -2489,7 +2489,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, #endif case USBDEVFS_DISCARDURB: - snoop(&dev->dev, "%s: DISCARDURB %p\n", __func__, p); + snoop(&dev->dev, "%s: DISCARDURB %pK\n", __func__, p); ret = proc_unlinkurb(ps, p); break; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 49550790a3cb..5235d6be1bdf 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1723,7 +1723,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) if (retval == 0) retval = -EINPROGRESS; else if (retval != -EIDRM && retval != -EBUSY) - dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n", + dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n", urb, retval); usb_put_dev(udev); } @@ -1890,7 +1890,7 @@ rescan: /* kick hcd */ unlink1(hcd, urb, -ESHUTDOWN); dev_dbg (hcd->self.controller, - "shutdown urb %p ep%d%s%s\n", + "shutdown urb %pK ep%d%s%s\n", urb, usb_endpoint_num(&ep->desc), is_in ? "in" : "out", ({ char *s; diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index d75cb8c0f7df..47903d510955 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -338,7 +338,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (!urb || !urb->complete) return -EINVAL; if (urb->hcpriv) { - WARN_ONCE(1, "URB %p submitted while active\n", urb); + WARN_ONCE(1, "URB %pK submitted while active\n", urb); return -EBUSY; } -- cgit v1.2.1 From 0bd193d62b4270a2a7a09da43ad1034c7ca5b3d3 Mon Sep 17 00:00:00 2001 From: Maksim Salau Date: Sat, 13 May 2017 23:49:26 +0300 Subject: usb: misc: legousbtower: Fix memory leak get_version_reply is not freed if function returns with success. Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack") Reported-by: Heikki Krogerus Signed-off-by: Maksim Salau Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/legousbtower.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index aa3c280fdf8d..0782ac6f5edf 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -926,6 +926,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device USB_MAJOR, dev->minor); exit: + kfree(get_version_reply); return retval; error: -- cgit v1.2.1 From 41318a2b82f5d5fe1fb408f6d6e0b22aa557111d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 12 May 2017 12:06:32 +0200 Subject: uwb: fix device quirk on big-endian hosts Add missing endianness conversion when using the USB device-descriptor idProduct field to apply a hardware quirk. Fixes: 1ba47da52712 ("uwb: add the i1480 DFU driver") Cc: stable # 2.6.28 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/i1480/dfu/usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index 6345e85822a4..a50cf45e530f 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -341,6 +341,7 @@ error_submit_ep1: static int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) { + struct usb_device *udev = interface_to_usbdev(iface); struct i1480_usb *i1480_usb; struct i1480 *i1480; struct device *dev = &iface->dev; @@ -352,8 +353,8 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) iface->cur_altsetting->desc.bInterfaceNumber); goto error; } - if (iface->num_altsetting > 1 - && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) { + if (iface->num_altsetting > 1 && + le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) { /* Need altsetting #1 [HW QUIRK] or EP1 won't work */ result = usb_set_interface(interface_to_usbdev(iface), 0, 1); if (result < 0) -- cgit v1.2.1 From 7cdfe4ddea47dbc66306edf802fd2ef86a6c8867 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 12 May 2017 10:06:29 +0200 Subject: sisusb_con: fix coccinelle warning After commit d705ff3818 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff3818 but omitted. Signed-off-by: Jiri Slaby Fixes: d705ff3818 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb_con.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index 3c6948af726a..f019d80ca9e4 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -973,7 +973,7 @@ sisusbcon_set_origin(struct vc_data *c) mutex_unlock(&sisusb->lock); - return 1; + return true; } /* Interface routine */ -- cgit v1.2.1 From 63afd5cc78775018ea2dec4004428dafa5283e93 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:36:01 +0200 Subject: USB: chaoskey: fix Alea quirk on big-endian hosts Add missing endianness conversion when applying the Alea timeout quirk. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e4a886e811cd ("hwrng: chaoskey - Fix URB warning due to timeout on Alea") Cc: stable # 4.8 Cc: Bob Ham Cc: Herbert Xu Cc: Keith Packard Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/chaoskey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index e9cae4d82af2..15d4e64d3b65 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -192,7 +192,7 @@ static int chaoskey_probe(struct usb_interface *interface, dev->in_ep = in_ep; - if (udev->descriptor.idVendor != ALEA_VENDOR_ID) + if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID) dev->reads_started = 1; dev->size = size; -- cgit v1.2.1 From dd5ca753fa92fb736b1395db892bd29f78e6d408 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:36:02 +0200 Subject: USB: iowarrior: fix info ioctl on big-endian hosts Drop erroneous le16_to_cpu when returning the USB device speed which is already in host byte order. Found using sparse: warning: cast to restricted __le16 Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable # 2.6.21 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/iowarrior.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 77569531b78a..83b05a287b0c 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -554,7 +554,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice); /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */ - info.speed = le16_to_cpu(dev->udev->speed); + info.speed = dev->udev->speed; info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber; info.report_size = dev->report_size; -- cgit v1.2.1 From 1a744d2eb76aaafb997fda004ae3ae62a1538f85 Mon Sep 17 00:00:00 2001 From: Anton Bondarenko Date: Sun, 7 May 2017 01:53:46 +0200 Subject: usb: core: fix potential memory leak in error path during hcd creation Free memory allocated for address0_mutex if allocation of bandwidth_mutex failed. Fixes: feb26ac31a2a ("usb: core: hub: hub_port_init lock controller instead of bus") Signed-off-by: Anton Bondarenko Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 5235d6be1bdf..5dea98358c05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2520,6 +2520,7 @@ struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex), GFP_KERNEL); if (!hcd->bandwidth_mutex) { + kfree(hcd->address0_mutex); kfree(hcd); dev_dbg(dev, "hcd bandwidth mutex alloc failed\n"); return NULL; -- cgit v1.2.1 From dd14a3e9b92ac6f0918054f9e3477438760a4fa6 Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Thu, 27 Apr 2017 12:12:49 -0700 Subject: usb: r8a66597-hcd: decrease timeout The timeout for BULK packets was 300ms which is a long time if other endpoints or devices are waiting for their turn. Changing it to 50ms greatly increased the overall performance for multi-endpoint devices. Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by: Chris Brandt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index bfa7fa3d2eea..698ec8721403 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1269,7 +1269,7 @@ static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td) time = 30; break; default: - time = 300; + time = 50; break; } -- cgit v1.2.1 From 1f873d857b6c2fefb4dada952674aa01bcfb92bd Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Thu, 27 Apr 2017 12:12:02 -0700 Subject: usb: r8a66597-hcd: select a different endpoint on timeout If multiple endpoints on a single device have pending IN URBs and one endpoint times out due to NAKs (perfectly legal), select a different endpoint URB to try. The existing code only checked to see another device address has pending URBs and ignores other IN endpoints on the current device address. This leads to endpoints never getting serviced if one endpoint is using NAK as a flow control method. Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by: Chris Brandt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 698ec8721403..7bf78be1fd32 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1785,6 +1785,7 @@ static void r8a66597_td_timer(unsigned long _r8a66597) pipe = td->pipe; pipe_stop(r8a66597, pipe); + /* Select a different address or endpoint */ new_td = td; do { list_move_tail(&new_td->queue, @@ -1794,7 +1795,8 @@ static void r8a66597_td_timer(unsigned long _r8a66597) new_td = td; break; } - } while (td != new_td && td->address == new_td->address); + } while (td != new_td && td->address == new_td->address && + td->pipe->info.epnum == new_td->pipe->info.epnum); start_transfer(r8a66597, new_td); -- cgit v1.2.1 From a7415477a20448bbb7d13765784c0b29249a176f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 16 May 2017 16:26:13 +0200 Subject: USB: ehci-platform: fix companion-device leak Make sure do drop the reference taken to the companion device during resume. Fixes: d4d75128b8fd ("usb: host: ehci-platform: fix usb 1.1 device is not connected in system resume") Cc: stable # 4.11 Signed-off-by: Johan Hovold Acked-by: Yoshihiro Shimoda Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-platform.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index bc7b9be12f54..f1908ea9fbd8 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -384,8 +384,10 @@ static int ehci_platform_resume(struct device *dev) } companion_dev = usb_of_get_companion_dev(hcd->self.controller); - if (companion_dev) + if (companion_dev) { device_pm_wait_for_dev(hcd->self.controller, companion_dev); + put_device(companion_dev); + } ehci_resume(hcd, priv->reset_on_resume); return 0; -- cgit v1.2.1 From ef53b92ece675ed9778b50f4432e004683696d01 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 16 May 2017 16:26:14 +0200 Subject: USB: core: of: document reference taken by companion helper Document that the new companion-device lookup helper takes a reference to the companion device which needs to be dropped after use. Signed-off-by: Johan Hovold Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/of.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index d787f195a9a6..d563cbcf76cf 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -53,6 +53,9 @@ EXPORT_SYMBOL_GPL(usb_of_get_child_node); * * Find the companion device from platform bus. * + * Takes a reference to the returned struct device which needs to be dropped + * after use. + * * Return: On success, a pointer to the companion device, %NULL on failure. */ struct device *usb_of_get_companion_dev(struct device *dev) -- cgit v1.2.1 From d81182ce30dbd497a1e7047d7fda2af040347790 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:25 +0200 Subject: USB: gadget: dummy_hcd: fix hub-descriptor removable fields Flag the first and only port as removable while also leaving the remaining bits (including the reserved bit zero) unset in accordance with the specifications: "Within a byte, if no port exists for a given location, the bit field representing the port characteristics shall be 0." Also add a comment marking the legacy PortPwrCtrlMask field. Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Tatyana Brokhman Signed-off-by: Johan Hovold Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/dummy_hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index c79081952ea0..ccabb51cb98d 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2008,7 +2008,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc) HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = 1; desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ - desc->u.ss.DeviceRemovable = 0xffff; + desc->u.ss.DeviceRemovable = 0; } static inline void hub_descriptor(struct usb_hub_descriptor *desc) @@ -2020,8 +2020,8 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc) HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = 1; - desc->u.hs.DeviceRemovable[0] = 0xff; - desc->u.hs.DeviceRemovable[1] = 0xff; + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */ } static int dummy_hub_control( -- cgit v1.2.1 From ec963b412a54aac8e527708ecad06a6988a86fb4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:26 +0200 Subject: USB: usbip: fix nonconforming hub descriptor Fix up the root-hub descriptor to accommodate the variable-length DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as removable (and leaving the reserved bit zero unset). Also add a build-time constraint on VHCI_HC_PORTS which must never be greater than USB_MAXCHILDREN (but this was only enforced through a KConfig constant). This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is greater than seven (default is 8). Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver") Cc: Takahiro Hirofuchi Cc: Valentina Manea Signed-off-by: Johan Hovold Acked-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 5d8b2c261940..0585078638db 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -235,14 +235,19 @@ done: static inline void hub_descriptor(struct usb_hub_descriptor *desc) { + int width; + memset(desc, 0, sizeof(*desc)); desc->bDescriptorType = USB_DT_HUB; - desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = VHCI_HC_PORTS; - desc->u.hs.DeviceRemovable[0] = 0xff; - desc->u.hs.DeviceRemovable[1] = 0xff; + BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN); + width = desc->bNbrPorts / 8 + 1; + desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width; + memset(&desc->u.hs.DeviceRemovable[0], 0, width); + memset(&desc->u.hs.DeviceRemovable[width], 0xff, width); } static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, -- cgit v1.2.1 From 2c25a2c818023df64463aac3288a9f969491e507 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:27 +0200 Subject: USB: hub: fix SS hub-descriptor handling A SuperSpeed hub descriptor does not have any variable-length fields so bail out when reading a short descriptor. This avoids parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes. Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes") Cc: stable # 2.6.39 Cc: John Youn Acked-by: Alan Stern Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9dca59ef18b3..3ff1e9f89f2d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -380,8 +380,12 @@ static int get_hub_descriptor(struct usb_device *hdev, void *data) USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, dtype << 8, 0, data, size, USB_CTRL_GET_TIMEOUT); - if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) + if (hub_is_superspeed(hdev)) { + if (ret == size) + return ret; + } else if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) { return ret; + } } return -EINVAL; } @@ -1321,7 +1325,7 @@ static int hub_configure(struct usb_hub *hub, /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, - * but the hub can/will return fewer bytes here. + * but a (non-SS) hub can/will return fewer bytes here. */ ret = get_hub_descriptor(hdev, hub->descriptor); if (ret < 0) { -- cgit v1.2.1 From bec444cd1c94c48df409a35ad4e5b143c245c3f7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:28 +0200 Subject: USB: hub: fix non-SS hub-descriptor handling Add missing sanity check on the non-SuperSpeed hub-descriptor length in order to avoid parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes (or a compound-device debug statement). Note that we only make sure that the DeviceRemovable field is always present (and specifically ignore the unused PortPwrCtrlMask field) in order to continue support any hubs with non-compliant descriptors. As a further safeguard, the descriptor buffer is also cleared. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable # 2.6.12 Signed-off-by: Johan Hovold Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3ff1e9f89f2d..f77a4ebde7d5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -362,7 +362,8 @@ static void usb_set_lpm_parameters(struct usb_device *udev) } /* USB 2.0 spec Section 11.24.4.5 */ -static int get_hub_descriptor(struct usb_device *hdev, void *data) +static int get_hub_descriptor(struct usb_device *hdev, + struct usb_hub_descriptor *desc) { int i, ret, size; unsigned dtype; @@ -378,12 +379,16 @@ static int get_hub_descriptor(struct usb_device *hdev, void *data) for (i = 0; i < 3; i++) { ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, - dtype << 8, 0, data, size, + dtype << 8, 0, desc, size, USB_CTRL_GET_TIMEOUT); if (hub_is_superspeed(hdev)) { if (ret == size) return ret; - } else if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) { + } else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) { + /* Make sure we have the DeviceRemovable field. */ + size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1; + if (ret < size) + return -EMSGSIZE; return ret; } } @@ -1317,7 +1322,7 @@ static int hub_configure(struct usb_hub *hub, } mutex_init(&hub->status_mutex); - hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL); + hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL); if (!hub->descriptor) { ret = -ENOMEM; goto fail; -- cgit v1.2.1 From 93491ced3c87c94b12220dbac0527e1356702179 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:29 +0200 Subject: USB: hub: fix SS max number of ports Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes") Acked-by: Alan Stern Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f77a4ebde7d5..b8bb20d7acdb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1336,7 +1336,13 @@ static int hub_configure(struct usb_hub *hub, if (ret < 0) { message = "can't read hub descriptor"; goto fail; - } else if (hub->descriptor->bNbrPorts > USB_MAXCHILDREN) { + } + + maxchild = USB_MAXCHILDREN; + if (hub_is_superspeed(hdev)) + maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS); + + if (hub->descriptor->bNbrPorts > maxchild) { message = "hub has too many ports!"; ret = -ENODEV; goto fail; -- cgit v1.2.1 From 5120a266928a07231d198bb518f6fe73148786a3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 10 May 2017 18:18:30 +0200 Subject: USB: host: xhci: use max-port define Use the new define for the maximum number of SuperSpeed ports instead of a constant when allocating xHCI root hubs. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bbe22bcc550a..69428e970925 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2307,10 +2307,11 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) /* Place limits on the number of roothub ports so that the hub * descriptors aren't longer than the USB core will allocate. */ - if (xhci->num_usb3_ports > 15) { + if (xhci->num_usb3_ports > USB_SS_MAXPORTS) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Limiting USB 3.0 roothub ports to 15."); - xhci->num_usb3_ports = 15; + "Limiting USB 3.0 roothub ports to %u.", + USB_SS_MAXPORTS); + xhci->num_usb3_ports = USB_SS_MAXPORTS; } if (xhci->num_usb2_ports > USB_MAXCHILDREN) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, -- cgit v1.2.1 From 1cc896ed61fa0441dffef726ff678fd82a9e6265 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 15 May 2017 16:01:30 +0100 Subject: iommu/dma: Don't touch invalid iova_domain members When __iommu_dma_map() and iommu_dma_free_iova() are called from iommu_dma_get_msi_page(), various iova_*() helpers are still invoked in the process, whcih is unwise since they access a different member of the union (the iova_domain) from that which was last written, and there's no guarantee that sensible values will result anyway. CLean up the code paths that are valid for an MSI cookie to ensure we only do iova_domain-specific things when we're actually dealing with one. Fixes: a44e6657585b ("iommu/dma: Clean up MSI IOVA allocation") Reported-by: Nate Watterson Tested-by: Shanker Donthineni Tested-by: Bharat Bhushan Signed-off-by: Robin Murphy Tested-by: Eric Auger Signed-off-by: Joerg Roedel --- drivers/iommu/dma-iommu.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 8348f366ddd1..62618e77bedc 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -396,13 +396,13 @@ static void iommu_dma_free_iova(struct iommu_dma_cookie *cookie, dma_addr_t iova, size_t size) { struct iova_domain *iovad = &cookie->iovad; - unsigned long shift = iova_shift(iovad); /* The MSI case is only ever cleaning up its most recent allocation */ if (cookie->type == IOMMU_DMA_MSI_COOKIE) cookie->msi_iova -= size; else - free_iova_fast(iovad, iova >> shift, size >> shift); + free_iova_fast(iovad, iova_pfn(iovad, iova), + size >> iova_shift(iovad)); } static void __iommu_dma_unmap(struct iommu_domain *domain, dma_addr_t dma_addr, @@ -617,11 +617,14 @@ static dma_addr_t __iommu_dma_map(struct device *dev, phys_addr_t phys, { struct iommu_domain *domain = iommu_get_domain_for_dev(dev); struct iommu_dma_cookie *cookie = domain->iova_cookie; - struct iova_domain *iovad = &cookie->iovad; - size_t iova_off = iova_offset(iovad, phys); + size_t iova_off = 0; dma_addr_t iova; - size = iova_align(iovad, size + iova_off); + if (cookie->type == IOMMU_DMA_IOVA_COOKIE) { + iova_off = iova_offset(&cookie->iovad, phys); + size = iova_align(&cookie->iovad, size + iova_off); + } + iova = iommu_dma_alloc_iova(domain, size, dma_get_mask(dev), dev); if (!iova) return DMA_ERROR_CODE; -- cgit v1.2.1 From f73a7eee900e95404b61408a23a1df5c5811704c Mon Sep 17 00:00:00 2001 From: KarimAllah Ahmed Date: Fri, 5 May 2017 11:39:59 -0700 Subject: iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings Ever since commit 091d42e43d ("iommu/vt-d: Copy translation tables from old kernel") the kdump kernel copies the IOMMU context tables from the previous kernel. Each device mappings will be destroyed once the driver for the respective device takes over. This unfortunately breaks the workflow of mapping and unmapping a new context to the IOMMU. The mapping function assumes that either: 1) Unmapping did the proper IOMMU flushing and it only ever flush if the IOMMU unit supports caching invalid entries. 2) The system just booted and the initialization code took care of flushing all IOMMU caches. This assumption is not true for the kdump kernel since the context tables have been copied from the previous kernel and translations could have been cached ever since. So make sure to flush the IOTLB as well when we destroy these old copied mappings. Cc: Joerg Roedel Cc: David Woodhouse Cc: David Woodhouse Cc: Anthony Liguori Signed-off-by: KarimAllah Ahmed Acked-by: David Woodhouse Cc: stable@vger.kernel.org v4.2+ Fixes: 091d42e43d ("iommu/vt-d: Copy translation tables from old kernel") Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 90ab0115d78e..fc2765ccdb57 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -2055,11 +2055,14 @@ static int domain_context_mapping_one(struct dmar_domain *domain, if (context_copied(context)) { u16 did_old = context_domain_id(context); - if (did_old >= 0 && did_old < cap_ndoms(iommu->cap)) + if (did_old >= 0 && did_old < cap_ndoms(iommu->cap)) { iommu->flush.flush_context(iommu, did_old, (((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT, DMA_CCMD_DEVICE_INVL); + iommu->flush.flush_iotlb(iommu, did_old, 0, 0, + DMA_TLB_DSI_FLUSH); + } } pgd = domain->pgd; -- cgit v1.2.1 From 745b6e74704782488dd875292bc49e24d23e81fd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 May 2017 13:35:51 +0200 Subject: iommu/mediatek: Include linux/dma-mapping.h The mediatek iommu driver relied on an implicit include of dma-mapping.h, but for some reason that is no longer there in 4.12-rc1: drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_domain_finalise': drivers/iommu/mtk_iommu_v1.c:233:16: error: implicit declaration of function 'dma_zalloc_coherent'; did you mean 'debug_dma_alloc_coherent'? [-Werror=implicit-function-declaration] drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_domain_free': drivers/iommu/mtk_iommu_v1.c:265:2: error: implicit declaration of function 'dma_free_coherent'; did you mean 'debug_dma_free_coherent'? [-Werror=implicit-function-declaration] This adds an explicit #include to make it build again. Signed-off-by: Arnd Bergmann Fixes: 208480bb27 ('iommu: Remove trace-events include from iommu.h') Signed-off-by: Joerg Roedel --- drivers/iommu/mtk_iommu_v1.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c index a27ef570c328..bc1efbfb9ddf 100644 --- a/drivers/iommu/mtk_iommu_v1.c +++ b/drivers/iommu/mtk_iommu_v1.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From 7e1b9521f5a8356553f5e58b07952bf346632ea4 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 11 Mar 2017 19:09:45 +0000 Subject: dm cache: handle kmalloc failure allocating background_tracker struct Currently there is no kmalloc failure check on the allocation of the background_tracker struct in btracker_create(), and so a NULL return will lead to a NULL pointer dereference. Add a NULL check. Detected by CoverityScan, CID#1416587 ("Dereference null return value") Fixes: b29d4986d ("dm cache: significant rework to leverage dm-bio-prison-v2") Signed-off-by: Colin Ian King Signed-off-by: Mike Snitzer --- drivers/md/dm-cache-background-tracker.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-cache-background-tracker.c b/drivers/md/dm-cache-background-tracker.c index 9b1afdfb13f0..707233891291 100644 --- a/drivers/md/dm-cache-background-tracker.c +++ b/drivers/md/dm-cache-background-tracker.c @@ -33,6 +33,11 @@ struct background_tracker *btracker_create(unsigned max_work) { struct background_tracker *b = kmalloc(sizeof(*b), GFP_KERNEL); + if (!b) { + DMERR("couldn't create background_tracker"); + return NULL; + } + b->max_work = max_work; atomic_set(&b->pending_promotes, 0); atomic_set(&b->pending_writebacks, 0); -- cgit v1.2.1 From 8d7a10dd323993cc40bd37bce8bc570133b0c396 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 17 May 2017 16:30:50 +0200 Subject: USB: serial: qcserial: add more Lenovo EM74xx device IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Cc: Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 38b3f0d8cd58..fd509ed6cf70 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */ {DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */ + {DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */ + {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ -- cgit v1.2.1 From 49e67dd17649b60b4d54966e18ec9c80198227f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 May 2017 17:29:09 +0200 Subject: of: fdt: add missing allocation-failure check The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped kzalloc) can fail so add the missing sanity check to avoid dereferencing a NULL pointer. Fixes: fe14042358fa ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree") Cc: stable # 2.6.38 Signed-off-by: Johan Hovold Signed-off-by: Rob Herring --- drivers/of/fdt.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index a0972219ccfc..0373ae49d24d 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -507,6 +507,9 @@ void *__unflatten_device_tree(const void *blob, /* Allocate memory for the expanded device tree */ mem = dt_alloc(size + 4, __alignof__(struct device_node)); + if (!mem) + return NULL; + memset(mem, 0, size); *(__be32 *)(mem + size) = cpu_to_be32(0xdeadbeef); -- cgit v1.2.1 From 87fe603274aa9889c05cca3c3e45675e1997cb13 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 16 May 2017 16:39:43 -0400 Subject: bnxt_en: Call bnxt_dcb_init() after getting firmware DCBX configuration. In the current code, bnxt_dcb_init() is called too early before we determine if the firmware DCBX agent is running or not. As a result, we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED flags properly to report to DCBNL. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index b56c54d68d5e..03f55daecb20 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7630,8 +7630,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->min_mtu = ETH_ZLEN; dev->max_mtu = BNXT_MAX_MTU; - bnxt_dcb_init(bp); - #ifdef CONFIG_BNXT_SRIOV init_waitqueue_head(&bp->sriov_cfg_wait); #endif @@ -7669,6 +7667,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) bnxt_hwrm_func_qcfg(bp); bnxt_hwrm_port_led_qcaps(bp); bnxt_ethtool_init(bp); + bnxt_dcb_init(bp); bnxt_set_rx_skb_mode(bp, false); bnxt_set_tpa_flags(bp); -- cgit v1.2.1 From f667724b99ad1afc91f16064d8fb293d2805bd57 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 16 May 2017 16:39:44 -0400 Subject: bnxt_en: Check status of firmware DCBX agent before setting DCB_CAP_DCBX_HOST. Otherwise, all the host based DCBX settings from lldpad will fail if the firmware DCBX agent is running. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c index 46de2f8ff024..5c6dd0ce209f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c @@ -553,8 +553,10 @@ static u8 bnxt_dcbnl_setdcbx(struct net_device *dev, u8 mode) if ((mode & DCB_CAP_DCBX_VER_CEE) || !(mode & DCB_CAP_DCBX_VER_IEEE)) return 1; - if ((mode & DCB_CAP_DCBX_HOST) && BNXT_VF(bp)) - return 1; + if (mode & DCB_CAP_DCBX_HOST) { + if (BNXT_VF(bp) || (bp->flags & BNXT_FLAG_FW_LLDP_AGENT)) + return 1; + } if (mode == bp->dcbx_cap) return 0; -- cgit v1.2.1 From 7bc5d5aff356f3ba16c4d1e9eaf95cc99b7574ab Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 17 May 2017 18:31:59 +0300 Subject: usb: xhci: trace URB before giving it back instead of after Don't access any members of a URB after giving it back. URB might be freed by then already. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 74bf5c60a260..507ba7734b94 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -641,8 +641,8 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, xhci_urb_free_priv(urb_priv); usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(hcd, urb, status); trace_xhci_urb_giveback(urb); + usb_hcd_giveback_urb(hcd, urb, status); spin_lock(&xhci->lock); } -- cgit v1.2.1 From a0c16630d35a874e82bdf2088f58ecaca1024315 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 17 May 2017 18:32:00 +0300 Subject: xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton Intel Denverton microserver is Atom based and need the PME and CAS quirks as well. Cc: stable Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7b86508ac8cf..fcf1f3f63e7a 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -52,6 +52,7 @@ #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 +#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 static const char hcd_name[] = "xhci_hcd"; @@ -166,7 +167,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && @@ -175,7 +177,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_ETRON && -- cgit v1.2.1 From 7480d912d549f414e0ce39331870899e89a5598c Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 17 May 2017 18:32:01 +0300 Subject: usb: host: xhci-mem: allocate zeroed Scratchpad Buffer According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Cc: stable Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 69428e970925..12b573cfb846 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1724,7 +1724,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); for (i = 0; i < num_sp; i++) { dma_addr_t dma; - void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, + void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma, flags); if (!buf) goto fail_sp4; -- cgit v1.2.1 From 6a29beef9d1b16c762e469d77e28c3de3f5c3dbb Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 17 May 2017 18:32:02 +0300 Subject: usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled, then the assertion of the Interrupt Pending (IP) flag in Figure 30 generates a PCI Dword write. The IP flag is automatically cleared by the completion of the PCI write. the MSI enabled HCs don't need to clear interrupt pending bit, but hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role controller software designs, it sets hcd->irq as 0 to avoid HCD requesting interrupt, and they want to decide when to call usb_hcd_irq by software. Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 +---- drivers/usb/host/xhci.c | 5 +++-- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 507ba7734b94..0830b25f9499 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2707,12 +2707,9 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) */ status |= STS_EINT; writel(status, &xhci->op_regs->status); - /* FIXME when MSI-X is supported and there are multiple vectors */ - /* Clear the MSI-X event interrupt status */ - if (hcd->irq) { + if (!hcd->msi_enabled) { u32 irq_pending; - /* Acknowledge the PCI interrupt */ irq_pending = readl(&xhci->ir_set->irq_pending); irq_pending |= IMAN_IP; writel(irq_pending, &xhci->ir_set->irq_pending); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2d1310220832..71eb2991c698 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -359,9 +359,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) /* fall back to msi*/ ret = xhci_setup_msi(xhci); - if (!ret) - /* hcd->irq is 0, we have MSI */ + if (!ret) { + hcd->msi_enabled = 1; return 0; + } if (!pdev->irq) { xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); -- cgit v1.2.1 From 63aea0dbab90a2461faaae357cbc8cfd6c8de9fe Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 17 May 2017 18:32:03 +0300 Subject: USB: xhci: fix lock-inversion problem With threaded interrupts, bottom-half handlers are called with interrupts enabled. Therefore they can't safely use spin_lock(); they have to use spin_lock_irqsave(). Lockdep warns about a violation occurring in xhci_irq(): ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.11.0-rc8-dbg+ #1 Not tainted --------------------------------------------------------- swapper/7/0 just changed the state of lock: (&(&ehci->lock)->rlock){-.-...}, at: [] ehci_hrtimer_func+0x29/0xc0 [ehci_hcd] but this lock took another, HARDIRQ-unsafe lock in the past: (hcd_urb_list_lock){+.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hcd_urb_list_lock); local_irq_disable(); lock(&(&ehci->lock)->rlock); lock(hcd_urb_list_lock); lock(&(&ehci->lock)->rlock); *** DEADLOCK *** no locks held by swapper/7/0. the shortest dependencies between 2nd lock and 1st lock: -> (hcd_urb_list_lock){+.....} ops: 252 { HARDIRQ-ON-W at: __lock_acquire+0x602/0x1280 lock_acquire+0xd5/0x1c0 _raw_spin_lock+0x2f/0x40 usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore] xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd] finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd] xhci_irq+0xdd6/0x1fa0 [xhci_hcd] usb_hcd_irq+0x26/0x40 [usbcore] irq_forced_thread_fn+0x2f/0x70 irq_thread+0x149/0x1d0 kthread+0x113/0x150 ret_from_fork+0x2e/0x40 This patch fixes the problem. Signed-off-by: Alan Stern Reported-and-tested-by: Bart Van Assche CC: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0830b25f9499..6d2492c1c643 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2677,11 +2677,12 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) struct xhci_hcd *xhci = hcd_to_xhci(hcd); union xhci_trb *event_ring_deq; irqreturn_t ret = IRQ_NONE; + unsigned long flags; dma_addr_t deq; u64 temp_64; u32 status; - spin_lock(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); /* Check if the xHC generated the interrupt, or the irq is shared */ status = readl(&xhci->op_regs->status); if (status == ~(u32)0) { @@ -2754,7 +2755,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) ret = IRQ_HANDLED; out: - spin_unlock(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); return ret; } -- cgit v1.2.1 From 5db851cf20857c5504b146046e97cb7781f2a743 Mon Sep 17 00:00:00 2001 From: Matthias Lange Date: Wed, 17 May 2017 18:32:04 +0300 Subject: xhci: remove GFP_DMA flag from allocation There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. CC: Signed-off-by: Matthias Lange Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 12b573cfb846..1f1687e888d6 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -56,7 +56,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, } if (max_packet) { - seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA); + seg->bounce_buf = kzalloc(max_packet, flags); if (!seg->bounce_buf) { dma_pool_free(xhci->segment_pool, seg->trbs, dma); kfree(seg); -- cgit v1.2.1 From 604d02a2a66ab7f93fd3b2bde3698c29ef057b65 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 17 May 2017 18:32:05 +0300 Subject: xhci: Fix command ring stop regression in 4.11 In 4.11 TRB completion codes were renamed to match spec. Completion codes for command ring stopped and endpoint stopped were mixed, leading to failures while handling a stopped command ring. Use the correct completion code for command ring stopped events. Fixes: 0b7c105a04ca ("usb: host: xhci: rename completion codes to match spec") Cc: # 4.11 Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5e3e9d4c6956..0dde49c35dd2 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -419,7 +419,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) wait_for_completion(cmd->completion); if (cmd->status == COMP_COMMAND_ABORTED || - cmd->status == COMP_STOPPED) { + cmd->status == COMP_COMMAND_RING_STOPPED) { xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6d2492c1c643..03f63f50afb6 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -323,7 +323,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, if (i_cmd->status != COMP_COMMAND_ABORTED) continue; - i_cmd->status = COMP_STOPPED; + i_cmd->status = COMP_COMMAND_RING_STOPPED; xhci_dbg(xhci, "Turn aborted command %p to no-op\n", i_cmd->command_trb); @@ -1380,7 +1380,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); /* If CMD ring stopped we own the trbs between enqueue and dequeue */ - if (cmd_comp_code == COMP_STOPPED) { + if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) { complete_all(&xhci->cmd_ring_stop_completion); return; } @@ -1436,8 +1436,8 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, break; case TRB_CMD_NOOP: /* Is this an aborted command turned to NO-OP? */ - if (cmd->status == COMP_STOPPED) - cmd_comp_code = COMP_STOPPED; + if (cmd->status == COMP_COMMAND_RING_STOPPED) + cmd_comp_code = COMP_COMMAND_RING_STOPPED; break; case TRB_RESET_EP: WARN_ON(slot_id != TRB_TO_SLOT_ID( diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 71eb2991c698..30f47d92a610 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1764,7 +1764,7 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, switch (*cmd_status) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n"); ret = -ETIME; break; @@ -1814,7 +1814,7 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, switch (*cmd_status) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout while waiting for evaluate context command\n"); ret = -ETIME; break; @@ -3433,7 +3433,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, ret = reset_device_cmd->status; switch (ret) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout waiting for reset device command\n"); ret = -ETIME; goto command_cleanup; @@ -3818,7 +3818,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, */ switch (command->status) { case COMP_COMMAND_ABORTED: - case COMP_STOPPED: + case COMP_COMMAND_RING_STOPPED: xhci_warn(xhci, "Timeout while waiting for setup device command\n"); ret = -ETIME; break; -- cgit v1.2.1 From 4b148d5144d64ee135b8924350cb0b3a7fd21150 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 17 May 2017 18:32:06 +0300 Subject: usb: host: xhci-plat: propagate return value of platform_get_irq() platform_get_irq() returns an error code, but the xhci-plat driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. CC: Signed-off-by: Thomas Petazzoni Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 7c2a9e7c8e0f..c04144b25a67 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -177,7 +177,7 @@ static int xhci_plat_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) - return -ENODEV; + return irq; /* * sysdev must point to a device that is known to the system firmware -- cgit v1.2.1 From 3c50ffef25855a9d9e4b07b02d756a8cdd653069 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 17 May 2017 11:23:10 -0500 Subject: usb: musb: Fix trying to suspend while active for OTG configurations Commit d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") caused a regression where musb keeps trying to enable host mode with no cable connected. This seems to be caused by the fact that now phy is enabled earlier, and we are wrongly trying to force USB host mode on an OTG port. The errors we are getting are "trying to suspend as a_idle while active". For ports configured as OTG, we should not need to do anything to try to force USB host mode on it's OTG port. Trying to force host mode in this case just seems to completely confuse the musb state machine. Let's fix the issue by making musb_host_setup() attempt to force the mode only if port_mode is configured for host mode. Fixes: d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") Cc: Johan Hovold Cc: stable Reported-by: Laurent Pinchart Reported-by: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ac3a4952abb4..dbe617a735d8 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2780,10 +2780,11 @@ int musb_host_setup(struct musb *musb, int power_budget) int ret; struct usb_hcd *hcd = musb->hcd; - MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - + if (musb->port_mode == MUSB_PORT_MODE_HOST) { + MUSB_HST_MODE(musb); + musb->xceiv->otg->default_a = 1; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + } otg_set_host(musb->xceiv->otg, &hcd->self); hcd->self.otg_port = 1; musb->xceiv->otg->host = &hcd->self; -- cgit v1.2.1 From 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 17 May 2017 11:23:11 -0500 Subject: usb: musb: tusb6010_omap: Do not reset the other direction's packet size We have one register for each EP to set the maximum packet size for both TX and RX. If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side. To fix this issue, only modify the TX or RX part of the register. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Peter Ujfalusi Tested-by: Tony Lindgren Signed-off-by: Bin Liu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010_omap.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 8b43c4b99f04..7870b37e0ea5 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -219,6 +219,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, u32 dma_remaining; int src_burst, dst_burst; u16 csr; + u32 psize; int ch; s8 dmareq; s8 sync_dev; @@ -390,15 +391,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, if (chdat->tx) { /* Send transfer_packet_sz packets at a time */ - musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, - chdat->transfer_packet_sz); + psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET); + psize &= ~0x7ff; + psize |= chdat->transfer_packet_sz; + musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize); musb_writel(ep_conf, TUSB_EP_TX_OFFSET, TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); } else { /* Receive transfer_packet_sz packets at a time */ - musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, - chdat->transfer_packet_sz << 16); + psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET); + psize &= ~(0x7ff << 16); + psize |= (chdat->transfer_packet_sz << 16); + musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize); musb_writel(ep_conf, TUSB_EP_RX_OFFSET, TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len)); -- cgit v1.2.1 From 47ab37a19a8112670e63474016d5fbf86bc8737f Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Wed, 17 May 2017 15:28:19 +0800 Subject: net: ethernet: faraday: To support device tree usage. To support device tree usage for ftmac100. Signed-off-by: Greentime Hu Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftmac100.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c index 6ac336b546e6..1536356e2ea8 100644 --- a/drivers/net/ethernet/faraday/ftmac100.c +++ b/drivers/net/ethernet/faraday/ftmac100.c @@ -1174,11 +1174,17 @@ static int ftmac100_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id ftmac100_of_ids[] = { + { .compatible = "andestech,atmac100" }, + { } +}; + static struct platform_driver ftmac100_driver = { .probe = ftmac100_probe, .remove = ftmac100_remove, .driver = { .name = DRV_NAME, + .of_match_table = ftmac100_of_ids }, }; @@ -1202,3 +1208,4 @@ module_exit(ftmac100_exit); MODULE_AUTHOR("Po-Yu Chuang "); MODULE_DESCRIPTION("FTMAC100 driver"); MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(of, ftmac100_of_ids); -- cgit v1.2.1 From 486181bcb3248e2f1977f4e69387a898234a4e1e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 17 May 2017 16:31:41 +0200 Subject: qmi_wwan: add another Lenovo EM74xx device ID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use a new USB device ID for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index d7165767ca9d..8f923a147fa9 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1196,6 +1196,8 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */ {QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */ + {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ + {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ -- cgit v1.2.1 From 1ac91bff9c65d4a5e0da244495ea6275fd514c5a Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Thu, 18 May 2017 00:08:16 +0530 Subject: cxgb4: update latest firmware version supported Change t4fw_version.h to update latest firmware version number to 1.16.43.0. Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h index fa376444e57c..3549d3876278 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h @@ -37,7 +37,7 @@ #define T4FW_VERSION_MAJOR 0x01 #define T4FW_VERSION_MINOR 0x10 -#define T4FW_VERSION_MICRO 0x21 +#define T4FW_VERSION_MICRO 0x2B #define T4FW_VERSION_BUILD 0x00 #define T4FW_MIN_VERSION_MAJOR 0x01 @@ -46,7 +46,7 @@ #define T5FW_VERSION_MAJOR 0x01 #define T5FW_VERSION_MINOR 0x10 -#define T5FW_VERSION_MICRO 0x21 +#define T5FW_VERSION_MICRO 0x2B #define T5FW_VERSION_BUILD 0x00 #define T5FW_MIN_VERSION_MAJOR 0x00 @@ -55,7 +55,7 @@ #define T6FW_VERSION_MAJOR 0x01 #define T6FW_VERSION_MINOR 0x10 -#define T6FW_VERSION_MICRO 0x21 +#define T6FW_VERSION_MICRO 0x2B #define T6FW_VERSION_BUILD 0x00 #define T6FW_MIN_VERSION_MAJOR 0x00 -- cgit v1.2.1 From 52499a6ad2aef20f7baf5872e97988c385170f1b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 19 Apr 2017 20:24:41 +0200 Subject: gpu: host1x: select IOMMU_IOVA When IOMMU_IOVA is not built-in but host1x is, we get a link error: drivers/gpu/host1x/dev.o: In function `host1x_remove': dev.c:(.text.host1x_remove+0x50): undefined reference to `put_iova_domain' drivers/gpu/host1x/dev.o: In function `host1x_probe': dev.c:(.text.host1x_probe+0x31c): undefined reference to `init_iova_domain' dev.c:(.text.host1x_probe+0x38c): undefined reference to `put_iova_domain' drivers/gpu/host1x/cdma.o: In function `host1x_cdma_init': cdma.c:(.text.host1x_cdma_init+0x238): undefined reference to `alloc_iova' cdma.c:(.text.host1x_cdma_init+0x2c0): undefined reference to `__free_iova' drivers/gpu/host1x/cdma.o: In function `host1x_cdma_deinit': cdma.c:(.text.host1x_cdma_deinit+0xb0): undefined reference to `free_iova' This adds the same select statement that we have for drm_tegra. Fixes: 404bfb78daf3 ("gpu: host1x: Add IOMMU support") Signed-off-by: Arnd Bergmann Reviewed-by: Mikko Perttunen Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/20170419182449.885312-1-arnd@arndb.de --- drivers/gpu/host1x/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/host1x/Kconfig b/drivers/gpu/host1x/Kconfig index b2fd029d67b3..91916326957f 100644 --- a/drivers/gpu/host1x/Kconfig +++ b/drivers/gpu/host1x/Kconfig @@ -1,6 +1,7 @@ config TEGRA_HOST1X tristate "NVIDIA Tegra host1x driver" depends on ARCH_TEGRA || (ARM && COMPILE_TEST) + select IOMMU_IOVA if IOMMU_SUPPORT help Driver for the NVIDIA Tegra host1x hardware. -- cgit v1.2.1 From b299cde245b0b76c977f4291162cf668e087b408 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Fri, 12 May 2017 14:42:58 -0700 Subject: drivers: char: mem: Check for address space wraparound with mmap() /dev/mem currently allows mmap() mappings that wrap around the end of the physical address space, which should probably be illegal. It circumvents the existing STRICT_DEVMEM permission check because the loop immediately terminates (as the start address is already higher than the end address). On the x86_64 architecture it will then cause a panic (from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()). This patch adds an explicit check to make sure offset + size will not wrap around in the physical address type. Signed-off-by: Julius Werner Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/mem.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 7e4a9d1296bb..6e0cbe092220 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -340,6 +340,11 @@ static const struct vm_operations_struct mmap_mem_ops = { static int mmap_mem(struct file *file, struct vm_area_struct *vma) { size_t size = vma->vm_end - vma->vm_start; + phys_addr_t offset = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT; + + /* It's illegal to wrap around the end of the physical address space. */ + if (offset + (phys_addr_t)size < offset) + return -EINVAL; if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size)) return -EINVAL; -- cgit v1.2.1 From 6bee9b78a7a5ea257b24d93974538938c82b1169 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 18 May 2017 14:35:21 +0200 Subject: drm/atmel-hlcdc: Fix output initialization drm_of_find_panel_or_bridge() is expecting np to point to the encoder node, not the bridge or panel this encoder is feeding. Moreover, the endpoint parameter passed to drm_of_find_panel_or_bridge() is always set to zero, which prevents us from probing all outputs. We also move the atmel_hlcdc_rgb_output allocation after the panel/bridge detection to avoid useless allocations. Reported-by: Alexandre Belloni Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Boris Brezillon Tested-by: Alexandre Belloni Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/1495110921-4032-1-git-send-email-boris.brezillon@free-electrons.com --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 36 +++++++++--------------- 1 file changed, 14 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c index 65a3bd7a0c00..423dda2785d4 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c @@ -152,8 +152,7 @@ static const struct drm_connector_funcs atmel_hlcdc_panel_connector_funcs = { .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; -static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, - const struct device_node *np) +static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int endpoint) { struct atmel_hlcdc_dc *dc = dev->dev_private; struct atmel_hlcdc_rgb_output *output; @@ -161,6 +160,11 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, struct drm_bridge *bridge; int ret; + ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 0, endpoint, + &panel, &bridge); + if (ret) + return ret; + output = devm_kzalloc(dev->dev, sizeof(*output), GFP_KERNEL); if (!output) return -EINVAL; @@ -177,10 +181,6 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, output->encoder.possible_crtcs = 0x1; - ret = drm_of_find_panel_or_bridge(np, 0, 0, &panel, &bridge); - if (ret) - return ret; - if (panel) { output->connector.dpms = DRM_MODE_DPMS_OFF; output->connector.polled = DRM_CONNECTOR_POLL_CONNECT; @@ -220,22 +220,14 @@ err_encoder_cleanup: int atmel_hlcdc_create_outputs(struct drm_device *dev) { - struct device_node *remote; - int ret = -ENODEV; - int endpoint = 0; - - while (true) { - /* Loop thru possible multiple connections to the output */ - remote = of_graph_get_remote_node(dev->dev->of_node, 0, - endpoint++); - if (!remote) - break; - - ret = atmel_hlcdc_attach_endpoint(dev, remote); - of_node_put(remote); - if (ret) - return ret; - } + int endpoint, ret = 0; + + for (endpoint = 0; !ret; endpoint++) + ret = atmel_hlcdc_attach_endpoint(dev, endpoint); + + /* At least one device was successfully attached.*/ + if (ret == -ENODEV && endpoint) + return 0; return ret; } -- cgit v1.2.1 From 9434cec130a941e8a0698d598dfa5499dbdeb949 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 5 May 2017 21:08:44 +0200 Subject: firmware: Google VPD: Fix memory allocation error handling This patch fixes several issues: - if the 1st 'kzalloc' fails, we dereference a NULL pointer - if the 2nd 'kzalloc' fails, there is a memory leak - if 'sysfs_create_bin_file' fails there is also a memory leak Fix it by adding a test after the first memory allocation and some error handling paths to correctly free memory if needed. Signed-off-by: Christophe JAILLET Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/google/vpd.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c index 3ce813110d5e..1e7860f02f4f 100644 --- a/drivers/firmware/google/vpd.c +++ b/drivers/firmware/google/vpd.c @@ -116,9 +116,13 @@ static int vpd_section_attrib_add(const u8 *key, s32 key_len, return VPD_OK; info = kzalloc(sizeof(*info), GFP_KERNEL); - info->key = kzalloc(key_len + 1, GFP_KERNEL); - if (!info->key) + if (!info) return -ENOMEM; + info->key = kzalloc(key_len + 1, GFP_KERNEL); + if (!info->key) { + ret = -ENOMEM; + goto free_info; + } memcpy(info->key, key, key_len); @@ -135,12 +139,17 @@ static int vpd_section_attrib_add(const u8 *key, s32 key_len, list_add_tail(&info->list, &sec->attribs); ret = sysfs_create_bin_file(sec->kobj, &info->bin_attr); - if (ret) { - kfree(info->key); - return ret; - } + if (ret) + goto free_info_key; return 0; + +free_info_key: + kfree(info->key); +free_info: + kfree(info); + + return ret; } static void vpd_section_attrib_destroy(struct vpd_section *sec) -- cgit v1.2.1 From 6dd4aba36f2dca00c3b6976a0d59c5cee16ad545 Mon Sep 17 00:00:00 2001 From: Arkadi Sharshevsky Date: Thu, 18 May 2017 09:18:52 +0200 Subject: mlxsw: spectrum_dpipe: Fix incorrect entry index In case of disabled counters the entry index will be incorrect. Fix this by moving the entry index set before the counter status check. Fixes: 2ba5999f009d ("mlxsw: spectrum: Add Support for erif table entries access") Signed-off-by: Arkadi Sharshevsky Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.c index ea56f6ade6b4..5f0a7bc692a4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.c @@ -199,10 +199,11 @@ static int mlxsw_sp_erif_entry_get(struct mlxsw_sp *mlxsw_sp, entry->counter_valid = false; entry->counter = 0; + entry->index = mlxsw_sp_rif_index(rif); + if (!counters_enabled) return 0; - entry->index = mlxsw_sp_rif_index(rif); err = mlxsw_sp_rif_counter_value_get(mlxsw_sp, rif, MLXSW_SP_RIF_COUNTER_EGRESS, &cnt); -- cgit v1.2.1 From 6b1206bbbce6092b2ec412125300889e6e551bc2 Mon Sep 17 00:00:00 2001 From: Arkadi Sharshevsky Date: Thu, 18 May 2017 09:18:53 +0200 Subject: mlxsw: spectrum_router: Fix rif counter freeing routine During rif counter freeing the counter index can be invalid. Add check of validity before freeing the counter. Fixes: e0c0afd8aa4e ("mlxsw: spectrum: Support for counters on router interfaces") Signed-off-by: Arkadi Sharshevsky Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 33cec1cc1642..9f89c4137d21 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -206,6 +206,9 @@ void mlxsw_sp_rif_counter_free(struct mlxsw_sp *mlxsw_sp, { unsigned int *p_counter_index; + if (!mlxsw_sp_rif_counter_valid_get(rif, dir)) + return; + p_counter_index = mlxsw_sp_rif_p_counter_get(rif, dir); if (WARN_ON(!p_counter_index)) return; -- cgit v1.2.1 From 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 May 2017 15:01:34 +0200 Subject: sh_eth: Use platform device for printing before register_netdev() The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index f68c4db656ed..c85222b02754 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3220,7 +3220,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* MDIO bus init */ ret = sh_mdio_init(mdp, pd); if (ret) { - dev_err(&ndev->dev, "failed to initialise MDIO\n"); + dev_err(&pdev->dev, "failed to initialise MDIO\n"); goto out_release; } -- cgit v1.2.1 From b7ce520e9f71ff65d0aa0ad86223f94ae4095fae Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 May 2017 15:01:35 +0200 Subject: sh_eth: Do not print an error message for probe deferral EPROBE_DEFER is not an error, hence printing an error message like sh-eth ee700000.ethernet: failed to initialise MDIO may confuse the user. To fix this, suppress the error message in case of probe deferral. While at it, shorten the message, and add the actual error code. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index c85222b02754..2d686ccf971b 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3220,7 +3220,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* MDIO bus init */ ret = sh_mdio_init(mdp, pd); if (ret) { - dev_err(&pdev->dev, "failed to initialise MDIO\n"); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "MDIO init failed: %d\n", ret); goto out_release; } -- cgit v1.2.1 From c0e01eac7ada785fdeaea1ae5476ec1cf3b00374 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 18 May 2017 13:03:52 +0200 Subject: mlxsw: spectrum: Avoid possible NULL pointer dereference In case we got an FDB notification for a port that doesn't exist we execute an FDB entry delete to prevent it from re-appearing the next time we poll for notifications. If the operation failed we would trigger a NULL pointer dereference as 'mlxsw_sp_port' is NULL. Fix it by reporting the error using the underlying bus device instead. Fixes: 12f1501e7511 ("mlxsw: spectrum: remove FDB entry in case we get unknown object notification") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 0d8411f1f954..f4bb0c0b7c1d 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1497,8 +1497,7 @@ do_fdb_op: err = mlxsw_sp_port_fdb_uc_op(mlxsw_sp, local_port, mac, fid, adding, true); if (err) { - if (net_ratelimit()) - netdev_err(mlxsw_sp_port->dev, "Failed to set FDB entry\n"); + dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Failed to set FDB entry\n"); return; } @@ -1558,8 +1557,7 @@ do_fdb_op: err = mlxsw_sp_port_fdb_uc_lag_op(mlxsw_sp, lag_id, mac, fid, lag_vid, adding, true); if (err) { - if (net_ratelimit()) - netdev_err(mlxsw_sp_port->dev, "Failed to set FDB entry\n"); + dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Failed to set FDB entry\n"); return; } -- cgit v1.2.1 From d8f1deaa5256aba3296025e103e8abb96f3e6479 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 Mar 2017 13:09:52 +0100 Subject: watchdog: orion: fix compile-test dependencies I ran into one corner case with the orion watchdog using the atomic_io_modify interface: drivers/watchdog/orion_wdt.o: In function `orion_stop': orion_wdt.c:(.text.orion_stop+0x28): undefined reference to `atomic_io_modify' drivers/watchdog/orion_wdt.o: In function `armada375_stop': orion_wdt.c:(.text.armada375_stop+0x28): undefined reference to `atomic_io_modify' This function is available on all 32-bit ARM builds except for ebsa110, so we have to specifically exclude that from compile-testing. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 52a70ee6014f..8b9049dac094 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -452,7 +452,7 @@ config DAVINCI_WATCHDOG config ORION_WATCHDOG tristate "Orion watchdog" - depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST + depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110) depends on ARM select WATCHDOG_CORE help -- cgit v1.2.1 From 015b528644a84b0018d3286ecd6ea5f82dce0180 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 2 Mar 2017 18:31:11 +0100 Subject: watchdog: sama5d4: fix WDDIS handling The datasheet states: "When setting the WDDIS bit, and while it is set, the fields WDV and WDD must not be modified." Because the whole configuration is already cached inside .mr, wait for the user to enable the watchdog to configure it so it is enabled and configured at the same time (what the IP is actually expecting). When the watchdog is already enabled, it is not an issue to reconfigure it. Signed-off-by: Alexandre Belloni Acked-by: Wenyou.Yang Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sama5d4_wdt.c | 48 ++++++++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c index f709962018ac..5cee20caca78 100644 --- a/drivers/watchdog/sama5d4_wdt.c +++ b/drivers/watchdog/sama5d4_wdt.c @@ -44,6 +44,8 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS)) + #define wdt_read(wdt, field) \ readl_relaxed((wdt)->reg_base + (field)) @@ -89,7 +91,16 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd, wdt->mr &= ~AT91_WDT_WDD; wdt->mr |= AT91_WDT_SET_WDV(value); wdt->mr |= AT91_WDT_SET_WDD(value); - wdt_write(wdt, AT91_WDT_MR, wdt->mr); + + /* + * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When + * setting the WDDIS bit, and while it is set, the fields WDV and WDD + * must not be modified. + * If the watchdog is enabled, then the timeout can be updated. Else, + * wait that the user enables it. + */ + if (wdt_enabled) + wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS); wdd->timeout = timeout; @@ -145,23 +156,20 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt) static int sama5d4_wdt_init(struct sama5d4_wdt *wdt) { - struct watchdog_device *wdd = &wdt->wdd; - u32 value = WDT_SEC2TICKS(wdd->timeout); u32 reg; - /* - * Because the fields WDV and WDD must not be modified when the WDDIS - * bit is set, so clear the WDDIS bit before writing the WDT_MR. + * When booting and resuming, the bootloader may have changed the + * watchdog configuration. + * If the watchdog is already running, we can safely update it. + * Else, we have to disable it properly. */ - reg = wdt_read(wdt, AT91_WDT_MR); - reg &= ~AT91_WDT_WDDIS; - wdt_write(wdt, AT91_WDT_MR, reg); - - wdt->mr |= AT91_WDT_SET_WDD(value); - wdt->mr |= AT91_WDT_SET_WDV(value); - - wdt_write(wdt, AT91_WDT_MR, wdt->mr); - + if (wdt_enabled) { + wdt_write(wdt, AT91_WDT_MR, wdt->mr); + } else { + reg = wdt_read(wdt, AT91_WDT_MR); + if (!(reg & AT91_WDT_WDDIS)) + wdt_write(wdt, AT91_WDT_MR, reg | AT91_WDT_WDDIS); + } return 0; } @@ -172,6 +180,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev) struct resource *res; void __iomem *regs; u32 irq = 0; + u32 timeout; int ret; wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); @@ -221,6 +230,11 @@ static int sama5d4_wdt_probe(struct platform_device *pdev) return ret; } + timeout = WDT_SEC2TICKS(wdd->timeout); + + wdt->mr |= AT91_WDT_SET_WDD(timeout); + wdt->mr |= AT91_WDT_SET_WDV(timeout); + ret = sama5d4_wdt_init(wdt); if (ret) return ret; @@ -263,9 +277,7 @@ static int sama5d4_wdt_resume(struct device *dev) { struct sama5d4_wdt *wdt = dev_get_drvdata(dev); - wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS); - if (wdt->mr & AT91_WDT_WDDIS) - wdt_write(wdt, AT91_WDT_MR, wdt->mr); + sama5d4_wdt_init(wdt); return 0; } -- cgit v1.2.1 From ddd6d240b26dcb8b8dc98bd493eba944dd97ebc8 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 2 Mar 2017 18:31:12 +0100 Subject: watchdog: sama5d4: fix race condition WDT_MR and WDT_CR must not updated within three slow clock periods after the last ping (write to WDT_CR or WDT_MR). Ensure enough time has elapsed before writing those registers. wdt_write() waits for 4 periods to ensure at least 3 edges are seen by the IP. Signed-off-by: Alexandre Belloni Acked-by: Wenyou.Yang Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sama5d4_wdt.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c index 5cee20caca78..362fd229786d 100644 --- a/drivers/watchdog/sama5d4_wdt.c +++ b/drivers/watchdog/sama5d4_wdt.c @@ -6,6 +6,7 @@ * Licensed under GPLv2. */ +#include #include #include #include @@ -29,6 +30,7 @@ struct sama5d4_wdt { struct watchdog_device wdd; void __iomem *reg_base; u32 mr; + unsigned long last_ping; }; static int wdt_timeout = WDT_DEFAULT_TIMEOUT; @@ -49,8 +51,29 @@ MODULE_PARM_DESC(nowayout, #define wdt_read(wdt, field) \ readl_relaxed((wdt)->reg_base + (field)) -#define wdt_write(wtd, field, val) \ - writel_relaxed((val), (wdt)->reg_base + (field)) +/* 4 slow clock periods is 4/32768 = 122.07µs*/ +#define WDT_DELAY usecs_to_jiffies(123) + +static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val) +{ + /* + * WDT_CR and WDT_MR must not be modified within three slow clock + * periods following a restart of the watchdog performed by a write + * access in WDT_CR. + */ + while (time_before(jiffies, wdt->last_ping + WDT_DELAY)) + usleep_range(30, 125); + writel_relaxed(val, wdt->reg_base + field); + wdt->last_ping = jiffies; +} + +static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val) +{ + if (time_before(jiffies, wdt->last_ping + WDT_DELAY)) + udelay(123); + writel_relaxed(val, wdt->reg_base + field); + wdt->last_ping = jiffies; +} static int sama5d4_wdt_start(struct watchdog_device *wdd) { @@ -164,11 +187,12 @@ static int sama5d4_wdt_init(struct sama5d4_wdt *wdt) * Else, we have to disable it properly. */ if (wdt_enabled) { - wdt_write(wdt, AT91_WDT_MR, wdt->mr); + wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr); } else { reg = wdt_read(wdt, AT91_WDT_MR); if (!(reg & AT91_WDT_WDDIS)) - wdt_write(wdt, AT91_WDT_MR, reg | AT91_WDT_WDDIS); + wdt_write_nosleep(wdt, AT91_WDT_MR, + reg | AT91_WDT_WDDIS); } return 0; } @@ -193,6 +217,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev) wdd->ops = &sama5d4_wdt_ops; wdd->min_timeout = MIN_WDT_TIMEOUT; wdd->max_timeout = MAX_WDT_TIMEOUT; + wdt->last_ping = jiffies; watchdog_set_drvdata(wdd, wdt); -- cgit v1.2.1 From 46c319b848268dab3f0e7c4a5b6e9146d3bca8a4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 13 Mar 2017 13:49:45 +0100 Subject: watchdog: pcwd_usb: fix NULL-deref at probe Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pcwd_usb.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 99ebf6ea3de6..5615f4013924 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -630,6 +630,9 @@ static int usb_pcwd_probe(struct usb_interface *interface, return -ENODEV; } + if (iface_desc->desc.bNumEndpoints < 1) + return -ENODEV; + /* check out the endpoint: it has to be Interrupt & IN */ endpoint = &iface_desc->endpoint[0].desc; -- cgit v1.2.1 From 0ddad77b90cb52075b5a9498f0621e3e265cc19f Mon Sep 17 00:00:00 2001 From: Tomas Melin Date: Mon, 20 Mar 2017 09:29:31 +0200 Subject: watchdog: cadence_wdt: fix timeout setting wdt_timeout must not be initialized to CDNS_WDT_DEFAULT_TIMEOUT in order to allow the value to be overriddden by a device tree setting. This way, the default timeout value will be used only in case module_param has not been set, or device tree timeout-sec has not been defined. Signed-off-by: Tomas Melin Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/cadence_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/cadence_wdt.c b/drivers/watchdog/cadence_wdt.c index 8d61e8bfe60b..86e0b5d2e761 100644 --- a/drivers/watchdog/cadence_wdt.c +++ b/drivers/watchdog/cadence_wdt.c @@ -49,7 +49,7 @@ /* Counter maximum value */ #define CDNS_WDT_COUNTER_MAX 0xFFF -static int wdt_timeout = CDNS_WDT_DEFAULT_TIMEOUT; +static int wdt_timeout; static int nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_timeout, int, 0); -- cgit v1.2.1 From 455a9a60b6d4afb293b0e63ec75cc8e82912a767 Mon Sep 17 00:00:00 2001 From: Shile Zhang Date: Mon, 10 Apr 2017 22:39:33 +0800 Subject: watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOT To fix following build error when SOFTWARE_REBOOT is defined: CC [M] driver/watchdog/wdt_pci.o driver/watchdog/wdt_pci.c: In function 'wdtpci_interrupt': driver/watchdog/wdt_pci.c:335:3: error: too many arguments to function 'emergency_restart' emergency_restart(NULL); ^ In file included from driver/watchdog/wdt_pci.c:51:0: include/linux/reboot.h:80:13: note: declared here extern void emergency_restart(void); ^ Signed-off-by: Shile Zhang Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 48b2c058b009..bc7addc2dc06 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -332,7 +332,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) pr_crit("Would Reboot\n"); #else pr_crit("Initiating system reboot\n"); - emergency_restart(NULL); + emergency_restart(); #endif #else pr_crit("Reset in 5ms\n"); -- cgit v1.2.1 From 76cefef8e838304a71725a0b5007c375619d78fb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 11 Jan 2017 12:53:05 +0100 Subject: firmware: ti_sci: fix strncat length check gcc-7 notices that the length we pass to strncat is wrong: drivers/firmware/ti_sci.c: In function 'ti_sci_probe': drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of the destination [-Werror=stringop-overflow=] Instead of the total length, we must pass the length of the remaining space here. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Cc: stable@vger.kernel.org Acked-by: Nishanth Menon Acked-by: Santosh Shilimkar Signed-off-by: Arnd Bergmann --- drivers/firmware/ti_sci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 874ff32db366..00cfed3c3e1a 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -202,7 +202,8 @@ static int ti_sci_debugfs_create(struct platform_device *pdev, info->debug_buffer[info->debug_region_size] = 0; info->d = debugfs_create_file(strncat(debug_name, dev_name(dev), - sizeof(debug_name)), + sizeof(debug_name) - + sizeof("ti_sci_debug@")), 0444, NULL, info, &ti_sci_debug_fops); if (IS_ERR(info->d)) return PTR_ERR(info->d); -- cgit v1.2.1 From 1fccb73011ea8a5fa0c6d357c33fa29c695139ea Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Apr 2017 13:41:15 +0200 Subject: iTCO_wdt: all versions count down twice The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko Signed-off-by: Paolo Bonzini Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_wdt.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 347f0389b089..c4f65873bfa4 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -306,16 +306,15 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev) iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout); + /* Reset the timeout status bit so that the timer + * needs to count down twice again before rebooting */ + outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */ + /* Reload the timer by writing to the TCO Timer Counter register */ - if (p->iTCO_version >= 2) { + if (p->iTCO_version >= 2) outw(0x01, TCO_RLD(p)); - } else if (p->iTCO_version == 1) { - /* Reset the timeout status bit so that the timer - * needs to count down twice again before rebooting */ - outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */ - + else if (p->iTCO_version == 1) outb(0x01, TCO_RLD(p)); - } spin_unlock(&p->io_lock); return 0; @@ -328,11 +327,8 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) unsigned char val8; unsigned int tmrval; - tmrval = seconds_to_ticks(p, t); - - /* For TCO v1 the timer counts down twice before rebooting */ - if (p->iTCO_version == 1) - tmrval /= 2; + /* The timer counts down twice before rebooting */ + tmrval = seconds_to_ticks(p, t) / 2; /* from the specs: */ /* "Values of 0h-3h are ignored and should not be attempted" */ @@ -385,6 +381,8 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) spin_lock(&p->io_lock); val16 = inw(TCO_RLD(p)); val16 &= 0x3ff; + if (!(inw(TCO1_STS(p)) & 0x0008)) + val16 += (inw(TCOv2_TMR(p)) & 0x3ff); spin_unlock(&p->io_lock); time_left = ticks_to_seconds(p, val16); -- cgit v1.2.1 From 07441a7dd11f6855bcf55fbbfc6abba42258b2c6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 25 Apr 2017 16:17:33 +0000 Subject: watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/zx2967_wdt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/zx2967_wdt.c b/drivers/watchdog/zx2967_wdt.c index e290d5a13a6d..c98252733c30 100644 --- a/drivers/watchdog/zx2967_wdt.c +++ b/drivers/watchdog/zx2967_wdt.c @@ -211,10 +211,8 @@ static int zx2967_wdt_probe(struct platform_device *pdev) base = platform_get_resource(pdev, IORESOURCE_MEM, 0); wdt->reg_base = devm_ioremap_resource(dev, base); - if (IS_ERR(wdt->reg_base)) { - dev_err(dev, "ioremap failed\n"); + if (IS_ERR(wdt->reg_base)) return PTR_ERR(wdt->reg_base); - } zx2967_wdt_reset_sysctrl(dev); -- cgit v1.2.1 From fedf266f9955d9a019643cde199a2fd9a0259f6f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 27 Apr 2017 18:02:32 -0700 Subject: watchdog: bcm281xx: Fix use of uninitialized spinlock. The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730dc208 ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by: Eric Anholt Reviewed-by: Florian Fainelli Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/bcm_kona_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/bcm_kona_wdt.c b/drivers/watchdog/bcm_kona_wdt.c index 6fce17d5b9f1..a5775dfd8d5f 100644 --- a/drivers/watchdog/bcm_kona_wdt.c +++ b/drivers/watchdog/bcm_kona_wdt.c @@ -304,6 +304,8 @@ static int bcm_kona_wdt_probe(struct platform_device *pdev) if (!wdt) return -ENOMEM; + spin_lock_init(&wdt->lock); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); wdt->base = devm_ioremap_resource(dev, res); if (IS_ERR(wdt->base)) @@ -316,7 +318,6 @@ static int bcm_kona_wdt_probe(struct platform_device *pdev) return ret; } - spin_lock_init(&wdt->lock); platform_set_drvdata(pdev, wdt); watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt); bcm_kona_wdt_wdd.parent = &pdev->dev; -- cgit v1.2.1 From 9d6408433019bfae15e2d0d5f4498c4ff70b86c0 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 19 May 2017 09:56:40 +0100 Subject: i2c: designware: don't infer timings described by ACPI from clock rate Commit bd698d24b1b57 ("i2c: designware: Get selected speed mode sda-hold-time via ACPI") updated the logic that reads the timing parameters for various I2C bus rates from the DSDT, to only read the timing parameters for the currently selected mode. This causes a WARN_ON() splat on platforms that legally omit the clock frequency from the ACPI description, because in the new situation, the core I2C designware driver still accesses the fields in the driver struct that we no longer populate, and proceeds to calculate them from the clock frequency. Since the clock frequency is unspecified, the driver complains loudly using a WARN_ON(). So revert back to the old situation, where the struct fields for all timings are populated, but retain the new logic which chooses the SDA hold time from the timing mode that is currently in use. Fixes: bd698d24b1b57 ("i2c: designware: Get selected speed mode ...") Signed-off-by: Ard Biesheuvel Reported-by: Lorenzo Pieralisi Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index f2acd4b6bf01..6283b99d2b17 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -96,6 +96,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) struct dw_i2c_dev *dev = platform_get_drvdata(pdev); acpi_handle handle = ACPI_HANDLE(&pdev->dev); const struct acpi_device_id *id; + u32 ss_ht, fp_ht, hs_ht, fs_ht; struct acpi_device *adev; const char *uid; @@ -107,23 +108,24 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) * Try to get SDA hold time and *CNT values from an ACPI method for * selected speed modes. */ + dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht); + dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht); + dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht); + dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht); + switch (dev->clk_freq) { case 100000: - dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, - &dev->sda_hold_time); + dev->sda_hold_time = ss_ht; break; case 1000000: - dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, - &dev->sda_hold_time); + dev->sda_hold_time = fp_ht; break; case 3400000: - dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, - &dev->sda_hold_time); + dev->sda_hold_time = hs_ht; break; case 400000: default: - dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, - &dev->sda_hold_time); + dev->sda_hold_time = fs_ht; break; } -- cgit v1.2.1 From f63572dff1421b6ca6abce71d46e03411e605c94 Mon Sep 17 00:00:00 2001 From: Jon Derrick Date: Fri, 5 May 2017 14:52:06 -0600 Subject: nvme: unmap CMB and remove sysfs file in reset path CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by: Jon Derrick Acked-by: Keith Busch Reviewed-By: Stephen Bates Cc: # 4.9+ Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 56a315bd4d96..0866f64890e5 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1510,6 +1510,11 @@ static inline void nvme_release_cmb(struct nvme_dev *dev) if (dev->cmb) { iounmap(dev->cmb); dev->cmb = NULL; + if (dev->cmbsz) { + sysfs_remove_file_from_group(&dev->ctrl.device->kobj, + &dev_attr_cmb.attr, NULL); + dev->cmbsz = 0; + } } } @@ -1783,6 +1788,7 @@ static void nvme_pci_disable(struct nvme_dev *dev) { struct pci_dev *pdev = to_pci_dev(dev->dev); + nvme_release_cmb(dev); pci_free_irq_vectors(pdev); if (pci_is_enabled(pdev)) { @@ -2188,7 +2194,6 @@ static void nvme_remove(struct pci_dev *pdev) nvme_dev_disable(dev, true); nvme_dev_remove_admin(dev); nvme_free_queues(dev, 0); - nvme_release_cmb(dev); nvme_release_prp_pools(dev); nvme_dev_unmap(dev); nvme_put_ctrl(&dev->ctrl); -- cgit v1.2.1 From 85e6a6adf8de7f992e01d2c3c59d9875d658b276 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 5 May 2017 16:13:15 -0700 Subject: nvme-fc: require target or discovery role for fc-nvme targets In order to create an association, the remoteport must be serving either a target role or a discovery role. Signed-off-by: James Smart Reviewed-by: Johannes Thumshirn Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/fc.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 70e689bf1cad..912d457150d5 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2720,6 +2720,12 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, unsigned long flags; int ret, idx; + if (!(rport->remoteport.port_role & + (FC_PORT_ROLE_NVME_DISCOVERY | FC_PORT_ROLE_NVME_TARGET))) { + ret = -EBADR; + goto out_fail; + } + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); if (!ctrl) { ret = -ENOMEM; -- cgit v1.2.1 From 2952a879bacbfae8b03fd886754e64fe14b8041e Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 25 Apr 2017 15:32:01 -0700 Subject: nvme-fc: stop queues on error detection Per the recommendation by Sagi on: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html Rather than waiting for reset work thread to stop queues and abort the ios, immediately stop the queues on error detection. Reset thread will restop the queues (as it's called on other paths), but it does not appear to have a side effect. Signed-off-by: James Smart Reviewed-by: Johannes Thumshirn Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/fc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 912d457150d5..dca7165fabcf 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1754,6 +1754,10 @@ nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg) dev_info(ctrl->ctrl.device, "NVME-FC{%d}: resetting controller\n", ctrl->cnum); + /* stop the queues on error, cleanup is in reset thread */ + if (ctrl->queue_count > 1) + nvme_stop_queues(&ctrl->ctrl); + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RECONNECTING)) { dev_err(ctrl->ctrl.device, "NVME-FC{%d}: error_recovery: Couldn't change state " -- cgit v1.2.1 From 4b8ba5fa525bc8bdaaed2a5c5433f0f2008d7bc5 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 25 Apr 2017 16:23:09 -0700 Subject: nvmet-fc: remove target cpu scheduling flag Remove NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED. It's unnecessary. Signed-off-by: James Smart Reviewed-by: Johannes Thumshirn Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/target/fc.c | 4 +--- drivers/nvme/target/fcloop.c | 1 - drivers/scsi/lpfc/lpfc_nvmet.c | 1 - 3 files changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index 62eba29c85fb..2006fae61980 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -517,9 +517,7 @@ nvmet_fc_queue_to_cpu(struct nvmet_fc_tgtport *tgtport, int qid) { int cpu, idx, cnt; - if (!(tgtport->ops->target_features & - NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED) || - tgtport->ops->max_hw_queues == 1) + if (tgtport->ops->max_hw_queues == 1) return WORK_CPU_UNBOUND; /* Simple cpu selection based on qid modulo active cpu count */ diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c index 15551ef79c8c..294a6611fb24 100644 --- a/drivers/nvme/target/fcloop.c +++ b/drivers/nvme/target/fcloop.c @@ -698,7 +698,6 @@ static struct nvmet_fc_target_template tgttemplate = { .dma_boundary = FCLOOP_DMABOUND_4G, /* optional features */ .target_features = NVMET_FCTGTFEAT_CMD_IN_ISR | - NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED | NVMET_FCTGTFEAT_OPDONE_IN_ISR, /* sizes of additional private data for data structures */ .target_priv_sz = sizeof(struct fcloop_tport), diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c index 94434e621c33..0488580eea12 100644 --- a/drivers/scsi/lpfc/lpfc_nvmet.c +++ b/drivers/scsi/lpfc/lpfc_nvmet.c @@ -764,7 +764,6 @@ lpfc_nvmet_create_targetport(struct lpfc_hba *phba) lpfc_tgttemplate.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1; lpfc_tgttemplate.max_hw_queues = phba->cfg_nvme_io_channel; lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP | - NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED | NVMET_FCTGTFEAT_CMD_IN_ISR | NVMET_FCTGTFEAT_OPDONE_IN_ISR; -- cgit v1.2.1 From 549f01ae7b913355bea76100d3f17694bc9ec769 Mon Sep 17 00:00:00 2001 From: Vijay Immanuel Date: Mon, 8 May 2017 16:38:35 -0700 Subject: nvmet: release the sq ref on rdma read errors On rdma read errors, release the sq ref that was taken when the req was initialized. This avoids a hang in nvmet_sq_destroy() when the queue is being freed. Signed-off-by: Vijay Immanuel Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/target/core.c | 6 ++++++ drivers/nvme/target/nvmet.h | 1 + drivers/nvme/target/rdma.c | 1 + 3 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index cf90713043da..eb9399ac97cf 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -529,6 +529,12 @@ fail: } EXPORT_SYMBOL_GPL(nvmet_req_init); +void nvmet_req_uninit(struct nvmet_req *req) +{ + percpu_ref_put(&req->sq->ref); +} +EXPORT_SYMBOL_GPL(nvmet_req_uninit); + static inline bool nvmet_cc_en(u32 cc) { return cc & 0x1; diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h index 7cb77ba5993b..cfc5c7fb0ab7 100644 --- a/drivers/nvme/target/nvmet.h +++ b/drivers/nvme/target/nvmet.h @@ -261,6 +261,7 @@ u16 nvmet_parse_fabrics_cmd(struct nvmet_req *req); bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq, struct nvmet_sq *sq, struct nvmet_fabrics_ops *ops); +void nvmet_req_uninit(struct nvmet_req *req); void nvmet_req_complete(struct nvmet_req *req, u16 status); void nvmet_cq_setup(struct nvmet_ctrl *ctrl, struct nvmet_cq *cq, u16 qid, diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index 99c69018a35f..9e45cde63376 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -567,6 +567,7 @@ static void nvmet_rdma_read_data_done(struct ib_cq *cq, struct ib_wc *wc) rsp->n_rdma = 0; if (unlikely(wc->status != IB_WC_SUCCESS)) { + nvmet_req_uninit(&rsp->req); nvmet_rdma_release_rsp(rsp); if (wc->status != IB_WC_WR_FLUSH_ERR) { pr_info("RDMA READ for CQE 0x%p failed with status %s (%d).\n", -- cgit v1.2.1