From 2acecd58969897795cf015c9057ebd349a3fda8a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 2 Aug 2017 13:21:45 +0900 Subject: usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 The latest HW manual (Rev.0.55) shows us this UGCTRL2.VBUSSEL bit. If the bit sets to 1, the VBUS drive is controlled by phy related registers (called "UCOM Registers" on the manual). Since R-Car Gen3 environment will control VBUS by phy-rcar-gen3-usb2 driver, the UGCTRL2.VBUSSEL bit should be set to 1. So, this patch fixes the register's value. Otherwise, even if the ID pin indicates to peripheral, the R-Car will output USBn_PWEN to 1 when a host driver is running. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control" Cc: # v4.6+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/rcar3.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/usb/renesas_usbhs') diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c index d544b331c9f2..02b67abfc2a1 100644 --- a/drivers/usb/renesas_usbhs/rcar3.c +++ b/drivers/usb/renesas_usbhs/rcar3.c @@ -20,9 +20,13 @@ /* Low Power Status register (LPSTS) */ #define LPSTS_SUSPM 0x4000 -/* USB General control register 2 (UGCTRL2), bit[31:6] should be 0 */ +/* + * USB General control register 2 (UGCTRL2) + * Remarks: bit[31:11] and bit[9:6] should be 0 + */ #define UGCTRL2_RESERVED_3 0x00000001 /* bit[3:0] should be B'0001 */ #define UGCTRL2_USB0SEL_OTG 0x00000030 +#define UGCTRL2_VBUSSEL 0x00000400 static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data) { @@ -34,7 +38,8 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev, { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG); + usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG | + UGCTRL2_VBUSSEL); if (enable) { usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM); -- cgit v1.2.1 From b7d44c36a6f6d956e1539e0dd42f98b26e5a4684 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 28 Jul 2017 19:28:57 +0900 Subject: usb: renesas_usbhs: gadget: fix unused-but-set-variable warning The commit b8b9c974afee ("usb: renesas_usbhs: gadget: disable all eps when the driver stops") causes the unused-but-set-variable warning. But, if the usbhsg_ep_disable() will return non-zero value, udc/core.c doesn't clear the ep->enabled flag. So, this driver should not return non-zero value, if the pipe is zero because this means the pipe is already disabled. Otherwise, the ep->enabled flag is never cleared when the usbhsg_ep_disable() is called by the renesas_usbhs driver first. Fixes: b8b9c974afee ("usb: renesas_usbhs: gadget: disable all eps when the driver stops") Fixes: 11432050f070 ("usb: renesas_usbhs: gadget: fix NULL pointer dereference in ep_disable()") Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/usb/renesas_usbhs') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 93fba9033b00..2c8161bcf5b5 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -639,14 +639,11 @@ static int usbhsg_ep_disable(struct usb_ep *ep) struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); struct usbhs_pipe *pipe; unsigned long flags; - int ret = 0; spin_lock_irqsave(&uep->lock, flags); pipe = usbhsg_uep_to_pipe(uep); - if (!pipe) { - ret = -EINVAL; + if (!pipe) goto out; - } usbhsg_pipe_disable(uep); usbhs_pipe_free(pipe); -- cgit v1.2.1