From ace32865a3767e4e385b883868c228a2a6db225a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 6 Apr 2009 19:00:34 -0700 Subject: Blackfin SPI Driver: use len_in_bytes when we care about the number of bytes transferred Use len_in_bytes when we care about the number of bytes transferred rather than the number of spi transactions. (this value will be the same for 8bit transfers, but not any other sizes) Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Acked-by: David Brownell Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bfin5xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 7ccd18a11fad..6d3f6064871e 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -804,7 +804,7 @@ static void pump_transfers(unsigned long data) if (bfin_addr_dcachable((unsigned long) drv_data->rx)) invalidate_dcache_range((unsigned long) drv_data->rx, (unsigned long) (drv_data->rx + - drv_data->len)); + drv_data->len_in_bytes)); /* clear tx reg soformer data is not shifted out */ write_TDBR(drv_data, 0xFFFF); @@ -830,7 +830,7 @@ static void pump_transfers(unsigned long data) if (bfin_addr_dcachable((unsigned long) drv_data->tx)) flush_dcache_range((unsigned long) drv_data->tx, (unsigned long) (drv_data->tx + - drv_data->len)); + drv_data->len_in_bytes)); /* start dma */ dma_enable_irq(drv_data->dma_channel); @@ -893,7 +893,7 @@ static void pump_transfers(unsigned long data) message->state = ERROR_STATE; } else { /* Update total byte transfered */ - message->actual_length += drv_data->len; + message->actual_length += drv_data->len_in_bytes; /* Move to next transfer of this msg */ message->state = next_transfer(drv_data); -- cgit v1.2.1