From 39387dc2cf22bc5e9c310a4991c6a40852df4217 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20B=C3=BCsch?= Date: Thu, 10 Mar 2016 18:34:23 +0100 Subject: rtc: rv3029: Add update_bits helper for eeprom access This simplifies the update of single bits in the eeprom. Signed-off-by: Michael Buesch Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-rv3029c2.c | 39 +++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 14 deletions(-) (limited to 'drivers/rtc') diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c index b416ed026168..3bbb581563c4 100644 --- a/drivers/rtc/rtc-rv3029c2.c +++ b/drivers/rtc/rtc-rv3029c2.c @@ -308,6 +308,24 @@ static int rv3029_eeprom_write(struct i2c_client *client, u8 reg, return ret; } +static int rv3029_eeprom_update_bits(struct i2c_client *client, + u8 reg, u8 mask, u8 set) +{ + u8 buf; + int ret; + + ret = rv3029_eeprom_read(client, reg, &buf, 1); + if (ret < 0) + return ret; + buf &= ~mask; + buf |= set & mask; + ret = rv3029_eeprom_write(client, reg, &buf, 1); + if (ret < 0) + return ret; + + return 0; +} + static int rv3029_i2c_read_time(struct i2c_client *client, struct rtc_time *tm) { @@ -588,23 +606,16 @@ static void rv3029_trickle_config(struct i2c_client *client) const struct rv3029_trickle_tab_elem *elem; int i, err; u32 ohms; - u8 eectrl; + u8 trickle_set_bits; if (!of_node) return; /* Configure the trickle charger. */ - err = rv3029_eeprom_read(client, RV3029_CONTROL_E2P_EECTRL, - &eectrl, 1); - if (err < 0) { - dev_err(&client->dev, - "Failed to read trickle charger config\n"); - return; - } err = of_property_read_u32(of_node, "trickle-resistor-ohms", &ohms); if (err) { /* Disable trickle charger. */ - eectrl &= ~RV3029_TRICKLE_MASK; + trickle_set_bits = 0; } else { /* Enable trickle charger. */ for (i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++) { @@ -612,17 +623,17 @@ static void rv3029_trickle_config(struct i2c_client *client) if (elem->r >= ohms) break; } - eectrl &= ~RV3029_TRICKLE_MASK; - eectrl |= elem->conf; + trickle_set_bits = elem->conf; dev_info(&client->dev, "Trickle charger enabled at %d ohms resistance.\n", elem->r); } - err = rv3029_eeprom_write(client, RV3029_CONTROL_E2P_EECTRL, - &eectrl, 1); + err = rv3029_eeprom_update_bits(client, RV3029_CONTROL_E2P_EECTRL, + RV3029_TRICKLE_MASK, + trickle_set_bits); if (err < 0) { dev_err(&client->dev, - "Failed to write trickle charger config\n"); + "Failed to update trickle charger config\n"); } } -- cgit v1.2.1