From 15920d8afc87861672e16fa95ae2764b065d6dd3 Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Sun, 30 Aug 2009 20:18:41 -0600
Subject: wireless: hostap, fix oops due to early probing interrupt

BugLink: https://bugs.launchpad.net/ubuntu/+bug/254837

Spurious shared interrupts or early probing interrupts can cause the
hostap interrupt handler to oops before the driver has fully configured
the IO base port addresses. In some cases the oops can be because
the hardware shares an interrupt line, on other cases it is due to a
race condition between probing for the hardware and configuring
the IO base port. The latter occurs because the probing is required to
determin the hardware port address which is only determined when the probe
can interrupt the hardware (catch 22).

This patch catches this pre-configured condition to avoid the oops.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/hostap/hostap_hw.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index ff9b5c882184..d70732819423 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2618,6 +2618,15 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id)
 	int events = 0;
 	u16 ev;
 
+	/* Detect early interrupt before driver is fully configued */
+	if (!dev->base_addr) {
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
+			       dev->name);
+		}
+		return IRQ_HANDLED;
+	}
+
 	iface = netdev_priv(dev);
 	local = iface->local;
 
-- 
cgit v1.2.3


From 411132628f95dd3d51b84e0e2d8ff8f4f2d09cdb Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Wed, 25 Nov 2009 21:00:30 -0500
Subject: ath9k_hw: remove unused ath9k_hw_devname() and ath9k_hw_probe()

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 30 ------------------------------
 1 file changed, 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2ec61f08cfdb..917f70f7a28e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -343,30 +343,6 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 	return true;
 }
 
-static const char *ath9k_hw_devname(u16 devid)
-{
-	switch (devid) {
-	case AR5416_DEVID_PCI:
-		return "Atheros 5416";
-	case AR5416_DEVID_PCIE:
-		return "Atheros 5418";
-	case AR9160_DEVID_PCI:
-		return "Atheros 9160";
-	case AR5416_AR9100_DEVID:
-		return "Atheros 9100";
-	case AR9280_DEVID_PCI:
-	case AR9280_DEVID_PCIE:
-		return "Atheros 9280";
-	case AR9285_DEVID_PCIE:
-		return "Atheros 9285";
-	case AR5416_DEVID_AR9287_PCI:
-	case AR5416_DEVID_AR9287_PCIE:
-		return "Atheros 9287";
-	}
-
-	return NULL;
-}
-
 static void ath9k_hw_init_config(struct ath_hw *ah)
 {
 	int i;
@@ -1266,12 +1242,6 @@ static void ath9k_hw_init_user_settings(struct ath_hw *ah)
 		ath9k_hw_set_global_txtimeout(ah, ah->globaltxtimeout);
 }
 
-const char *ath9k_hw_probe(u16 vendorid, u16 devid)
-{
-	return vendorid == ATHEROS_VENDOR_ID ?
-		ath9k_hw_devname(devid) : NULL;
-}
-
 void ath9k_hw_detach(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-- 
cgit v1.2.3


From 5e0ec316522e0372b633407c903b88f58859303f Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 29 Nov 2009 00:51:54 +0100
Subject: ar9170: remove dead definitions

This patch removes dead infrastructure which was meant
for an out-of-tree rate control algorithm.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/ar9170.h | 2 --
 drivers/net/wireless/ath/ar9170/main.c   | 1 -
 2 files changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 9f9459860d82..d95a7d47af04 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -109,7 +109,6 @@ struct ar9170_rxstream_mpdu_merge {
 	bool has_plcp;
 };
 
-#define AR9170_NUM_MAX_BA_RETRY	5
 #define AR9170_NUM_TID	16
 #define WME_BA_BMP_SIZE         64
 #define AR9170_NUM_MAX_AGG_LEN	(2 * WME_BA_BMP_SIZE)
@@ -143,7 +142,6 @@ struct ar9170_sta_tid {
 	u16 tid;
 	enum ar9170_tid_state state;
 	bool active;
-	u8 retry;
 };
 
 #define AR9170_QUEUE_TIMEOUT		64
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index f9d6db8d013e..cbf59b1590bf 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2366,7 +2366,6 @@ static void ar9170_sta_notify(struct ieee80211_hw *hw,
 			sta_info->agg[i].state = AR9170_TID_STATE_SHUTDOWN;
 			sta_info->agg[i].active = false;
 			sta_info->agg[i].ssn = 0;
-			sta_info->agg[i].retry = 0;
 			sta_info->agg[i].tid = i;
 			INIT_LIST_HEAD(&sta_info->agg[i].list);
 			skb_queue_head_init(&sta_info->agg[i].queue);
-- 
cgit v1.2.3


From 53a76b58b66e77164c4a79c38da49b808d67477e Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 29 Nov 2009 00:52:51 +0100
Subject: ar9170: improve network latency

AR9170 has the bad habit of choking when traffic builds up.
Tests have shown that this can partially be attributed to
a huge buildup of backlogged frames.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/ar9170.h |  2 ++
 drivers/net/wireless/ath/ar9170/main.c   | 34 +++++++++++++++-----------------
 2 files changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index d95a7d47af04..44c54b834a00 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -152,6 +152,8 @@ struct ar9170_sta_tid {
 
 #define AR9170_NUM_TX_STATUS		128
 #define AR9170_NUM_TX_AGG_MAX		30
+#define AR9170_NUM_TX_LIMIT_HARD       AR9170_TXQ_DEPTH
+#define AR9170_NUM_TX_LIMIT_SOFT       (AR9170_TXQ_DEPTH - 10)
 
 struct ar9170 {
 	struct ieee80211_hw *hw;
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index cbf59b1590bf..3cec2f16c657 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -430,7 +430,7 @@ void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
 	spin_lock_irqsave(&ar->tx_stats_lock, flags);
 	ar->tx_stats[queue].len--;
 
-	if (skb_queue_empty(&ar->tx_pending[queue])) {
+	if (ar->tx_stats[queue].len < AR9170_NUM_TX_LIMIT_SOFT) {
 #ifdef AR9170_QUEUE_STOP_DEBUG
 		printk(KERN_DEBUG "%s: wake queue %d\n",
 		       wiphy_name(ar->hw->wiphy), queue);
@@ -1716,6 +1716,21 @@ static void ar9170_tx(struct ar9170 *ar)
 
 	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
 		spin_lock_irqsave(&ar->tx_stats_lock, flags);
+		frames = min(ar->tx_stats[i].limit - ar->tx_stats[i].len,
+			     skb_queue_len(&ar->tx_pending[i]));
+
+		if (remaining_space < frames) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: tx quota reached queue:%d, "
+			       "remaining slots:%d, needed:%d\n",
+			       wiphy_name(ar->hw->wiphy), i, remaining_space,
+			       frames);
+#endif /* AR9170_QUEUE_DEBUG */
+			frames = remaining_space;
+		}
+
+		ar->tx_stats[i].len += frames;
+		ar->tx_stats[i].count += frames;
 		if (ar->tx_stats[i].len >= ar->tx_stats[i].limit) {
 #ifdef AR9170_QUEUE_DEBUG
 			printk(KERN_DEBUG "%s: queue %d full\n",
@@ -1733,25 +1748,8 @@ static void ar9170_tx(struct ar9170 *ar)
 			__ar9170_dump_txstats(ar);
 #endif /* AR9170_QUEUE_STOP_DEBUG */
 			ieee80211_stop_queue(ar->hw, i);
-			spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-			continue;
-		}
-
-		frames = min(ar->tx_stats[i].limit - ar->tx_stats[i].len,
-			     skb_queue_len(&ar->tx_pending[i]));
-
-		if (remaining_space < frames) {
-#ifdef AR9170_QUEUE_DEBUG
-			printk(KERN_DEBUG "%s: tx quota reached queue:%d, "
-			       "remaining slots:%d, needed:%d\n",
-			       wiphy_name(ar->hw->wiphy), i, remaining_space,
-			       frames);
-#endif /* AR9170_QUEUE_DEBUG */
-			frames = remaining_space;
 		}
 
-		ar->tx_stats[i].len += frames;
-		ar->tx_stats[i].count += frames;
 		spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
 
 		if (!frames)
-- 
cgit v1.2.3


From 15b098bbf79f06a09d3a15b911eb43295979deed Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 29 Nov 2009 00:56:55 +0100
Subject: ar9170: remove redundant frame flags

The flags in question were once useful for debugging.
Time has passed and now they do nothing more than
duplicating txinfo->flags.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/ar9170.h |  5 ---
 drivers/net/wireless/ath/ar9170/main.c   | 55 +++++++++++++-------------------
 2 files changed, 22 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 44c54b834a00..b99a8c2053d8 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -248,13 +248,8 @@ struct ar9170_sta_info {
 	unsigned int ampdu_max_len;
 };
 
-#define AR9170_TX_FLAG_WAIT_FOR_ACK	BIT(0)
-#define AR9170_TX_FLAG_NO_ACK		BIT(1)
-#define AR9170_TX_FLAG_BLOCK_ACK	BIT(2)
-
 struct ar9170_tx_info {
 	unsigned long timeout;
-	unsigned int flags;
 };
 
 #define IS_STARTED(a)		(((struct ar9170 *)a)->state >= AR9170_STARTED)
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 3cec2f16c657..d8ecf8554d01 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -213,10 +213,10 @@ static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
 	struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
 	struct ieee80211_hdr *hdr = (void *) txc->frame_data;
 
-	printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] flags:%x s:%d "
+	printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] s:%d "
 			  "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
 	       wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb),
-	       ieee80211_get_DA(hdr), arinfo->flags, ar9170_get_seq_h(hdr),
+	       ieee80211_get_DA(hdr), ar9170_get_seq_h(hdr),
 	       le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
 	       jiffies_to_msecs(arinfo->timeout - jiffies));
 }
@@ -440,22 +440,17 @@ void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
 	}
 	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
 
-	if (arinfo->flags & AR9170_TX_FLAG_BLOCK_ACK) {
-		ar9170_tx_ampdu_callback(ar, skb);
-	} else if (arinfo->flags & AR9170_TX_FLAG_WAIT_FOR_ACK) {
-		arinfo->timeout = jiffies +
-				  msecs_to_jiffies(AR9170_TX_TIMEOUT);
-
-		skb_queue_tail(&ar->tx_status[queue], skb);
-	} else if (arinfo->flags & AR9170_TX_FLAG_NO_ACK) {
+	if (info->flags & IEEE80211_TX_CTL_NO_ACK) {
 		ar9170_tx_status(ar, skb, AR9170_TX_STATUS_FAILED);
 	} else {
-#ifdef AR9170_QUEUE_DEBUG
-		printk(KERN_DEBUG "%s: unsupported frame flags!\n",
-		       wiphy_name(ar->hw->wiphy));
-		ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
-		dev_kfree_skb_any(skb);
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+			ar9170_tx_ampdu_callback(ar, skb);
+		} else {
+			arinfo->timeout = jiffies +
+				  msecs_to_jiffies(AR9170_TX_TIMEOUT);
+
+			skb_queue_tail(&ar->tx_status[queue], skb);
+		}
 	}
 
 	if (!ar->tx_stats[queue].len &&
@@ -1407,17 +1402,6 @@ static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 
 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
 	     (is_valid_ether_addr(ieee80211_get_DA(hdr)))) {
-		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
-			if (unlikely(!info->control.sta))
-				goto err_out;
-
-			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
-			arinfo->flags = AR9170_TX_FLAG_BLOCK_ACK;
-
-			goto out;
-		}
-
-		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
 		/*
 		 * WARNING:
 		 * Putting the QoS queue bits into an unexplored territory is
@@ -1431,12 +1415,17 @@ static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 
 		txc->phy_control |=
 			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
-		arinfo->flags = AR9170_TX_FLAG_WAIT_FOR_ACK;
-	} else {
-		arinfo->flags = AR9170_TX_FLAG_NO_ACK;
+
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+			if (unlikely(!info->control.sta))
+				goto err_out;
+
+			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
+		} else {
+			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
+		}
 	}
 
-out:
 	return 0;
 
 err_out:
@@ -1771,7 +1760,7 @@ static void ar9170_tx(struct ar9170 *ar)
 			arinfo->timeout = jiffies +
 					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
 
-			if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
+			if (info->flags & IEEE80211_TX_CTL_AMPDU)
 				atomic_inc(&ar->tx_ampdu_pending);
 
 #ifdef AR9170_QUEUE_DEBUG
@@ -1782,7 +1771,7 @@ static void ar9170_tx(struct ar9170 *ar)
 
 			err = ar->tx(ar, skb);
 			if (unlikely(err)) {
-				if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
+				if (info->flags & IEEE80211_TX_CTL_AMPDU)
 					atomic_dec(&ar->tx_ampdu_pending);
 
 				frames_failed++;
-- 
cgit v1.2.3


From 07bc54575b413688d1586407a73793df8f68d115 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 29 Nov 2009 00:59:48 +0100
Subject: ar9170: small misc changes

This patch aggregates a bunch of small random changes
that won't fit really anywhere else properly.

1. move tid-locating macro into a separate function.

2. remove redundant NULL check.

3. add modulation mask definition

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/hw.h   |  1 +
 drivers/net/wireless/ath/ar9170/main.c | 12 +++++++-----
 2 files changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 701ddb7d8400..0a1d4c28e68a 100644
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -276,6 +276,7 @@ struct ar9170_tx_control {
 #define AR9170_TX_MAC_RATE_PROBE		0x8000
 
 /* either-or */
+#define AR9170_TX_PHY_MOD_MASK			0x00000003
 #define AR9170_TX_PHY_MOD_CCK			0x00000000
 #define AR9170_TX_PHY_MOD_OFDM			0x00000001
 #define AR9170_TX_PHY_MOD_HT			0x00000002
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index d8ecf8554d01..20f04ab2b13e 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -194,12 +194,15 @@ static inline u16 ar9170_get_seq(struct sk_buff *skb)
 	return ar9170_get_seq_h((void *) txc->frame_data);
 }
 
+static inline u16 ar9170_get_tid_h(struct ieee80211_hdr *hdr)
+{
+	return (ieee80211_get_qos_ctl(hdr))[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
 static inline u16 ar9170_get_tid(struct sk_buff *skb)
 {
 	struct ar9170_tx_control *txc = (void *) skb->data;
-	struct ieee80211_hdr *hdr = (void *) txc->frame_data;
-
-	return (ieee80211_get_qos_ctl(hdr))[0] & IEEE80211_QOS_CTL_TID_MASK;
+	return ar9170_get_tid_h((struct ieee80211_hdr *) txc->frame_data);
 }
 
 #define GET_NEXT_SEQ(seq)	((seq + 1) & 0x0fff)
@@ -1660,8 +1663,7 @@ static bool ar9170_tx_ampdu(struct ar9170 *ar)
 		 * tell the FW/HW that this is the last frame,
 		 * that way it will wait for the immediate block ack.
 		 */
-		if (likely(skb_peek_tail(&agg)))
-			ar9170_tx_indicate_immba(ar, skb_peek_tail(&agg));
+		ar9170_tx_indicate_immba(ar, skb_peek_tail(&agg));
 
 #ifdef AR9170_TXAGG_DEBUG
 		printk(KERN_DEBUG "%s: generated A-MPDU looks like this:\n",
-- 
cgit v1.2.3


From 7dffb55b8a73228499ee65a3439f82112f4391c7 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 29 Nov 2009 01:01:14 +0100
Subject: ar9170: fix AC_VIDEO txop parameter

This patch fixes a rather embarrassing typo.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index ddc8c09dc79e..857e86104295 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -117,7 +117,7 @@ int ar9170_set_qos(struct ar9170 *ar)
 	ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_TXOP,
 			ar->edcf[0].txop | ar->edcf[1].txop << 16);
 	ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_TXOP,
-			ar->edcf[1].txop | ar->edcf[3].txop << 16);
+			ar->edcf[2].txop | ar->edcf[3].txop << 16);
 
 	ar9170_regwrite_finish();
 
-- 
cgit v1.2.3


From b7339b1de0f7b6b8c95a6df87ea2221521328d11 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:17:38 +0200
Subject: wl1251: add tx queue status to debugfs

Sometimes when debugging the state is good info.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251.h         |  1 +
 drivers/net/wireless/wl12xx/wl1251_debugfs.c | 23 +++++++++++++++++++++++
 2 files changed, 24 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 054533f7a124..6301578d1565 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -247,6 +247,7 @@ struct wl1251_debugfs {
 	struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
 
 	struct dentry *tx_queue_len;
+	struct dentry *tx_queue_status;
 
 	struct dentry *retry_count;
 	struct dentry *excessive_retries;
diff --git a/drivers/net/wireless/wl12xx/wl1251_debugfs.c b/drivers/net/wireless/wl12xx/wl1251_debugfs.c
index a00723059f83..0ccba57fb9fb 100644
--- a/drivers/net/wireless/wl12xx/wl1251_debugfs.c
+++ b/drivers/net/wireless/wl12xx/wl1251_debugfs.c
@@ -237,6 +237,27 @@ static const struct file_operations tx_queue_len_ops = {
 	.open = wl1251_open_file_generic,
 };
 
+static ssize_t tx_queue_status_read(struct file *file, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1251 *wl = file->private_data;
+	char buf[3], status;
+	int len;
+
+	if (wl->tx_queue_stopped)
+		status = 's';
+	else
+		status = 'r';
+
+	len = scnprintf(buf, sizeof(buf), "%c\n", status);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations tx_queue_status_ops = {
+	.read = tx_queue_status_read,
+	.open = wl1251_open_file_generic,
+};
+
 static void wl1251_debugfs_delete_files(struct wl1251 *wl)
 {
 	DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
@@ -331,6 +352,7 @@ static void wl1251_debugfs_delete_files(struct wl1251 *wl)
 	DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
 
 	DEBUGFS_DEL(tx_queue_len);
+	DEBUGFS_DEL(tx_queue_status);
 	DEBUGFS_DEL(retry_count);
 	DEBUGFS_DEL(excessive_retries);
 }
@@ -431,6 +453,7 @@ static int wl1251_debugfs_add_files(struct wl1251 *wl)
 	DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
 
 	DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+	DEBUGFS_ADD(tx_queue_status, wl->debugfs.rootdir);
 	DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
 	DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
 
-- 
cgit v1.2.3


From d67e261829d405ed19a6c2e648f224e352012f52 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:17:45 +0200
Subject: wl1251: print a debug message when tx_queue is full

This debug message was missing and caused incomplete log messages.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index ff4be7bf5d36..0417745d7fc4 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -395,6 +395,7 @@ static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * the queue here, otherwise the queue will get too long.
 	 */
 	if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_MAX_LENGTH) {
+		wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
 		ieee80211_stop_queues(wl->hw);
 
 		/*
-- 
cgit v1.2.3


From 478fdf2bcef73747eb99bc6dd3565f093942647a Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:17:52 +0200
Subject: wl1251: fix error handling in wl1251_op_config()

Not all return values were checked and one exit from function didn't put
firmware sleep after the error.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 0417745d7fc4..24050d56a9de 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -645,20 +645,25 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 		 * through the bss_info_changed() hook.
 		 */
 		ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+		if (ret < 0)
+			goto out_sleep;
 	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
 		   wl->psm_requested) {
 		wl1251_debug(DEBUG_PSM, "psm disabled");
 
 		wl->psm_requested = false;
 
-		if (wl->psm)
+		if (wl->psm) {
 			ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			if (ret < 0)
+				goto out_sleep;
+		}
 	}
 
 	if (conf->power_level != wl->power_level) {
 		ret = wl1251_acx_tx_power(wl, conf->power_level);
 		if (ret < 0)
-			goto out;
+			goto out_sleep;
 
 		wl->power_level = conf->power_level;
 	}
-- 
cgit v1.2.3


From b5a167942cb388cc5f1a6085cb3506d5bf47517d Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:17:59 +0200
Subject: wl1251: reduce ELP wakeup timeout

The original TI driver uses 100 ms timeout ELP wakeup timeout, better
to use the same. Otherwise problems with wakeup might get unnoticed.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_ps.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.c b/drivers/net/wireless/wl12xx/wl1251_ps.c
index 9931b197ff77..54a27200f3b6 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.c
@@ -26,7 +26,8 @@
 #include "wl1251_cmd.h"
 #include "wl1251_io.h"
 
-#define WL1251_WAKEUP_TIMEOUT 2000
+/* in ms */
+#define WL1251_WAKEUP_TIMEOUT 100
 
 void wl1251_elp_work(struct work_struct *work)
 {
-- 
cgit v1.2.3


From 7fa6282a1775bd41508220e65ba0cb92235b67d4 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:06 +0200
Subject: wl1251: simplify ELP wakeup time calculation

The wakeup time calculation was too complicated, simplify it.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_ps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.c b/drivers/net/wireless/wl12xx/wl1251_ps.c
index 54a27200f3b6..851dfb65e474 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.c
@@ -68,7 +68,7 @@ void wl1251_ps_elp_sleep(struct wl1251 *wl)
 
 int wl1251_ps_elp_wakeup(struct wl1251 *wl)
 {
-	unsigned long timeout;
+	unsigned long timeout, start;
 	u32 elp_reg;
 
 	if (!wl->elp)
@@ -76,6 +76,7 @@ int wl1251_ps_elp_wakeup(struct wl1251 *wl)
 
 	wl1251_debug(DEBUG_PSM, "waking up chip from elp");
 
+	start = jiffies;
 	timeout = jiffies + msecs_to_jiffies(WL1251_WAKEUP_TIMEOUT);
 
 	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
@@ -96,8 +97,7 @@ int wl1251_ps_elp_wakeup(struct wl1251 *wl)
 	}
 
 	wl1251_debug(DEBUG_PSM, "wakeup time: %u ms",
-		     jiffies_to_msecs(jiffies) -
-		     (jiffies_to_msecs(timeout) - WL1251_WAKEUP_TIMEOUT));
+		     jiffies_to_msecs(jiffies - start));
 
 	wl->elp = false;
 
-- 
cgit v1.2.3


From cdd1e9a91ea55594cbcc9847dbb9392e341cbefd Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:12 +0200
Subject: wl1251: use __dev_alloc_skb() on RX

RX is handled in a workqueue therefore allocating for GFP_ATOMIC
is overkill and not required.

Based on a patch for wl1271 by Luis R. Rodriguez.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.c b/drivers/net/wireless/wl12xx/wl1251_rx.c
index f84cc89cbffc..b56732226cc0 100644
--- a/drivers/net/wireless/wl12xx/wl1251_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_rx.c
@@ -126,7 +126,7 @@ static void wl1251_rx_body(struct wl1251 *wl,
 	if (wl->rx_current_buffer)
 		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
 
-	skb = dev_alloc_skb(length);
+	skb = __dev_alloc_skb(length, GFP_KERNEL);
 	if (!skb) {
 		wl1251_error("Couldn't allocate RX frame");
 		return;
-- 
cgit v1.2.3


From 86dff7a7955f1e14c1f2c142312462fae70ea7e4 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:19 +0200
Subject: wl1251: implement acx_ac_cfg to configure hardware queues

Needed for WMM.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_acx.c  | 33 ++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_acx.h  | 32 +++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_init.c |  5 ++++
 drivers/net/wireless/wl12xx/wl1251_init.h | 47 +++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_main.c | 27 ++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_tx.h   | 20 +++++++++++++
 6 files changed, 164 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.c b/drivers/net/wireless/wl12xx/wl1251_acx.c
index acfa086dbfc5..b409c75499dd 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.c
@@ -976,3 +976,36 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
+		      u8 aifs, u16 txop)
+{
+	struct wl1251_acx_ac_cfg *acx;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_ACX, "acx ac cfg %d cw_ming %d cw_max %d "
+		     "aifs %d txop %d", ac, cw_min, cw_max, aifs, txop);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->ac = ac;
+	acx->cw_min = cw_min;
+	acx->cw_max = cw_max;
+	acx->aifsn = aifs;
+	acx->txop_limit = txop;
+
+	ret = wl1251_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("acx ac cfg failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.h b/drivers/net/wireless/wl12xx/wl1251_acx.h
index 652371432cd8..56793245b287 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.h
@@ -1166,6 +1166,36 @@ struct wl1251_acx_wr_tbtt_and_dtim {
 	u8  padding;
 } __attribute__ ((packed));
 
+struct wl1251_acx_ac_cfg {
+	struct acx_header header;
+
+	/*
+	 * Access Category - The TX queue's access category
+	 * (refer to AccessCategory_enum)
+	 */
+	u8 ac;
+
+	/*
+	 * The contention window minimum size (in slots) for
+	 * the access class.
+	 */
+	u8 cw_min;
+
+	/*
+	 * The contention window maximum size (in slots) for
+	 * the access class.
+	 */
+	u16 cw_max;
+
+	/* The AIF value (in slots) for the access class. */
+	u8 aifsn;
+
+	u8 reserved;
+
+	/* The TX Op Limit (in microseconds) for the access class. */
+	u16 txop_limit;
+} __attribute__ ((packed));
+
 /*************************************************************************
 
     Host Interrupt Register (WiLink -> Host)
@@ -1322,5 +1352,7 @@ int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime);
 int wl1251_acx_rate_policies(struct wl1251 *wl);
 int wl1251_acx_mem_cfg(struct wl1251 *wl);
 int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim);
+int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
+		      u8 aifs, u16 txop);
 
 #endif /* __WL1251_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_init.c b/drivers/net/wireless/wl12xx/wl1251_init.c
index 5cb573383eeb..5aad56ea7153 100644
--- a/drivers/net/wireless/wl12xx/wl1251_init.c
+++ b/drivers/net/wireless/wl12xx/wl1251_init.c
@@ -294,6 +294,11 @@ static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl)
 			goto out;
 	}
 
+	wl1251_acx_ac_cfg(wl, AC_BE, CWMIN_BE, CWMAX_BE, AIFS_DIFS, TXOP_BE);
+	wl1251_acx_ac_cfg(wl, AC_BK, CWMIN_BK, CWMAX_BK, AIFS_DIFS, TXOP_BK);
+	wl1251_acx_ac_cfg(wl, AC_VI, CWMIN_VI, CWMAX_VI, AIFS_DIFS, TXOP_VI);
+	wl1251_acx_ac_cfg(wl, AC_VO, CWMIN_VO, CWMAX_VO, AIFS_DIFS, TXOP_VO);
+
 out:
 	kfree(config);
 	return ret;
diff --git a/drivers/net/wireless/wl12xx/wl1251_init.h b/drivers/net/wireless/wl12xx/wl1251_init.h
index b3b25ec885ea..269cefb3e7d4 100644
--- a/drivers/net/wireless/wl12xx/wl1251_init.h
+++ b/drivers/net/wireless/wl12xx/wl1251_init.h
@@ -26,6 +26,53 @@
 
 #include "wl1251.h"
 
+enum {
+	/* best effort/legacy */
+	AC_BE = 0,
+
+	/* background */
+	AC_BK = 1,
+
+	/* video */
+	AC_VI = 2,
+
+	/* voice */
+	AC_VO = 3,
+
+	/* broadcast dummy access category */
+	AC_BCAST = 4,
+
+	NUM_ACCESS_CATEGORIES = 4
+};
+
+/* following are defult values for the IE fields*/
+#define CWMIN_BK  15
+#define CWMIN_BE  15
+#define CWMIN_VI  7
+#define CWMIN_VO  3
+#define CWMAX_BK  1023
+#define CWMAX_BE  63
+#define CWMAX_VI  15
+#define CWMAX_VO  7
+
+/* slot number setting to start transmission at PIFS interval */
+#define AIFS_PIFS 1
+
+/*
+ * slot number setting to start transmission at DIFS interval - normal DCF
+ * access
+ */
+#define AIFS_DIFS 2
+
+#define AIFSN_BK  7
+#define AIFSN_BE  3
+#define AIFSN_VI  AIFS_PIFS
+#define AIFSN_VO  AIFS_PIFS
+#define TXOP_BK   0
+#define TXOP_BE   0
+#define TXOP_VI   3008
+#define TXOP_VO   1504
+
 int wl1251_hw_init_hwenc_config(struct wl1251 *wl);
 int wl1251_hw_init_templates_config(struct wl1251 *wl);
 int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter);
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 24050d56a9de..c1c7cb5aea2b 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1285,6 +1285,32 @@ static struct ieee80211_channel wl1251_channels[] = {
 	{ .hw_value = 13, .center_freq = 2472},
 };
 
+static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	struct wl1251 *wl = hw->priv;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
+				params->cw_min, params->cw_max,
+				params->aifs, params->txop);
+
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_supported_band wl1251_band_2ghz = {
 	.channels = wl1251_channels,
@@ -1305,6 +1331,7 @@ static const struct ieee80211_ops wl1251_ops = {
 	.hw_scan = wl1251_op_hw_scan,
 	.bss_info_changed = wl1251_op_bss_info_changed,
 	.set_rts_threshold = wl1251_op_set_rts_threshold,
+	.conf_tx = wl1251_op_conf_tx,
 };
 
 static int wl1251_register_hw(struct wl1251 *wl)
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.h b/drivers/net/wireless/wl12xx/wl1251_tx.h
index 7c1c1665c810..b7bead8b0aeb 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.h
@@ -26,6 +26,7 @@
 #define __WL1251_TX_H__
 
 #include <linux/bitops.h>
+#include "wl1251_acx.h"
 
 /*
  *
@@ -209,6 +210,25 @@ struct tx_result {
 	u8 done_2;
 } __attribute__ ((packed));
 
+static inline int wl1251_tx_get_queue(int queue)
+{
+	/* FIXME: use best effort until WMM is enabled */
+	return QOS_AC_BE;
+
+	switch (queue) {
+	case 0:
+		return QOS_AC_VO;
+	case 1:
+		return QOS_AC_VI;
+	case 2:
+		return QOS_AC_BE;
+	case 3:
+		return QOS_AC_BK;
+	default:
+		return QOS_AC_BE;
+	}
+}
+
 void wl1251_tx_work(struct work_struct *work);
 void wl1251_tx_complete(struct wl1251 *wl);
 void wl1251_tx_flush(struct wl1251 *wl);
-- 
cgit v1.2.3


From 27336f1c0cd68fb9ae45493321f0d6980144230e Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:27 +0200
Subject: wl1251: implement wl1251_acx_tid_cfg()

Needed for WMM.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_acx.c  | 36 ++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_acx.h  | 55 +++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_main.c | 11 +++++++
 3 files changed, 102 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.c b/drivers/net/wireless/wl12xx/wl1251_acx.c
index b409c75499dd..beff084040b5 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.c
@@ -1009,3 +1009,39 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl1251_acx_tid_cfg(struct wl1251 *wl, u8 queue,
+		       enum wl1251_acx_channel_type type,
+		       u8 tsid, enum wl1251_acx_ps_scheme ps_scheme,
+		       enum wl1251_acx_ack_policy ack_policy)
+{
+	struct wl1251_acx_tid_cfg *acx;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_ACX, "acx tid cfg %d type %d tsid %d "
+		     "ps_scheme %d ack_policy %d", queue, type, tsid,
+		     ps_scheme, ack_policy);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->queue = queue;
+	acx->type = type;
+	acx->tsid = tsid;
+	acx->ps_scheme = ps_scheme;
+	acx->ack_policy = ack_policy;
+
+	ret = wl1251_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("acx tid cfg failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.h b/drivers/net/wireless/wl12xx/wl1251_acx.h
index 56793245b287..26160c45784c 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.h
@@ -1196,6 +1196,57 @@ struct wl1251_acx_ac_cfg {
 	u16 txop_limit;
 } __attribute__ ((packed));
 
+
+enum wl1251_acx_channel_type {
+	CHANNEL_TYPE_DCF	= 0,
+	CHANNEL_TYPE_EDCF	= 1,
+	CHANNEL_TYPE_HCCA	= 2,
+};
+
+enum wl1251_acx_ps_scheme {
+	/* regular ps: simple sending of packets */
+	WL1251_ACX_PS_SCHEME_LEGACY	= 0,
+
+	/* sending a packet triggers a unscheduled apsd downstream */
+	WL1251_ACX_PS_SCHEME_UPSD_TRIGGER	= 1,
+
+	/* a pspoll packet will be sent before every data packet */
+	WL1251_ACX_PS_SCHEME_LEGACY_PSPOLL	= 2,
+
+	/* scheduled apsd mode */
+	WL1251_ACX_PS_SCHEME_SAPSD		= 3,
+};
+
+enum wl1251_acx_ack_policy {
+	WL1251_ACX_ACK_POLICY_LEGACY	= 0,
+	WL1251_ACX_ACK_POLICY_NO_ACK	= 1,
+	WL1251_ACX_ACK_POLICY_BLOCK	= 2,
+};
+
+struct wl1251_acx_tid_cfg {
+	struct acx_header header;
+
+	/* tx queue id number (0-7) */
+	u8 queue;
+
+	/* channel access type for the queue, enum wl1251_acx_channel_type */
+	u8 type;
+
+	/* EDCA: ac index (0-3), HCCA: traffic stream id (8-15) */
+	u8 tsid;
+
+	/* ps scheme of the specified queue, enum wl1251_acx_ps_scheme */
+	u8 ps_scheme;
+
+	/* the tx queue ack policy, enum wl1251_acx_ack_policy */
+	u8 ack_policy;
+
+	u8 padding[3];
+
+	/* not supported */
+	u32 apsdconf[2];
+} __attribute__ ((packed));
+
 /*************************************************************************
 
     Host Interrupt Register (WiLink -> Host)
@@ -1354,5 +1405,9 @@ int wl1251_acx_mem_cfg(struct wl1251 *wl);
 int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim);
 int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
 		      u8 aifs, u16 txop);
+int wl1251_acx_tid_cfg(struct wl1251 *wl, u8 queue,
+		       enum wl1251_acx_channel_type type,
+		       u8 tsid, enum wl1251_acx_ps_scheme ps_scheme,
+		       enum wl1251_acx_ack_policy ack_policy);
 
 #endif /* __WL1251_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index c1c7cb5aea2b..74770ada37de 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1302,7 +1302,18 @@ static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
 				params->cw_min, params->cw_max,
 				params->aifs, params->txop);
+	if (ret < 0)
+		goto out_sleep;
+
+	ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
+				 CHANNEL_TYPE_DCF,
+				 wl1251_tx_get_queue(queue),
+				 WL1251_ACX_PS_SCHEME_LEGACY,
+				 WL1251_ACX_ACK_POLICY_LEGACY);
+	if (ret < 0)
+		goto out_sleep;
 
+out_sleep:
 	wl1251_ps_elp_sleep(wl);
 
 out:
-- 
cgit v1.2.3


From 49e1b9faed736b20ad9a785638919341b567a595 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:33 +0200
Subject: wl1251: implement WMM

Now that necessary commands for WMM are implemented, implement queue handling
for WMM. But WMM is not enabled yet, only one queue is used.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 2 +-
 drivers/net/wireless/wl12xx/wl1251_tx.c   | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 74770ada37de..563c84fc575c 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1306,7 +1306,7 @@ static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 		goto out_sleep;
 
 	ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
-				 CHANNEL_TYPE_DCF,
+				 CHANNEL_TYPE_EDCF,
 				 wl1251_tx_get_queue(queue),
 				 WL1251_ACX_PS_SCHEME_LEGACY,
 				 WL1251_ACX_ACK_POLICY_LEGACY);
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.c b/drivers/net/wireless/wl12xx/wl1251_tx.c
index f85970615849..faa23efd05a1 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.c
@@ -167,8 +167,7 @@ static int wl1251_tx_fill_hdr(struct wl1251 *wl, struct sk_buff *skb,
 	tx_hdr->expiry_time = cpu_to_le32(1 << 16);
 	tx_hdr->id = id;
 
-	/* FIXME: how to get the correct queue id? */
-	tx_hdr->xmit_queue = 0;
+	tx_hdr->xmit_queue = wl1251_tx_get_queue(skb_get_queue_mapping(skb));
 
 	wl1251_tx_control(tx_hdr, control, fc);
 	wl1251_tx_frag_block_num(tx_hdr);
@@ -237,8 +236,9 @@ static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb,
 
 	wl1251_mem_write(wl, addr, skb->data, len);
 
-	wl1251_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
-		     tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+	wl1251_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x "
+		     "queue %d", tx_hdr->id, skb, tx_hdr->length,
+		     tx_hdr->rate, tx_hdr->xmit_queue);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 46cb35f5e761306b031029af2061ea263359a764 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:40 +0200
Subject: wl1251: update tx_hdr when aliging skb in tx

Before transmission when aligning the buffer to 4-byte bounday, tx_hdr
needs to be updated. Otherwise debug logs print false data.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_tx.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.c b/drivers/net/wireless/wl12xx/wl1251_tx.c
index faa23efd05a1..c8223185efd2 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.c
@@ -219,6 +219,7 @@ static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb,
 			/* align the buffer on a 4-byte boundary */
 			skb_reserve(skb, offset);
 			memmove(skb->data, src, skb->len);
+			tx_hdr = (struct tx_double_buffer_desc *) skb->data;
 		} else {
 			wl1251_info("No handler, fixme!");
 			return -EINVAL;
-- 
cgit v1.2.3


From da2fb4e9c215b8f0f8954818691549f8a34135be Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Mon, 30 Nov 2009 10:18:47 +0200
Subject: wl1251: enable WMM

Everything is ready now and we can enable WMM in mac80211.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 2 ++
 drivers/net/wireless/wl12xx/wl1251_tx.h   | 3 ---
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 563c84fc575c..63511ca131b1 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1388,6 +1388,8 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 	wl->hw->wiphy->max_scan_ssids = 1;
 	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
 
+	wl->hw->queues = 4;
+
 	ret = wl1251_register_hw(wl);
 	if (ret)
 		goto out;
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.h b/drivers/net/wireless/wl12xx/wl1251_tx.h
index b7bead8b0aeb..55856c6bb97a 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.h
@@ -212,9 +212,6 @@ struct tx_result {
 
 static inline int wl1251_tx_get_queue(int queue)
 {
-	/* FIXME: use best effort until WMM is enabled */
-	return QOS_AC_BE;
-
 	switch (queue) {
 	case 0:
 		return QOS_AC_VO;
-- 
cgit v1.2.3


From cef6e91280b724e93b0fb8a9fd3e6bf072f54c81 Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Mon, 30 Nov 2009 21:50:07 +0200
Subject: rndis_wlan: move copy of module parameters to separate function

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rndis_wlan.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 2ecbedb26e15..8dd9224c2d4e 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2594,23 +2594,9 @@ end:
 /*
  * driver/device initialization
  */
-static int bcm4320a_early_init(struct usbnet *usbdev)
-{
-	/* bcm4320a doesn't handle configuration parameters well. Try
-	 * set any and you get partially zeroed mac and broken device.
-	 */
-
-	return 0;
-}
-
-static int bcm4320b_early_init(struct usbnet *usbdev)
+static void rndis_copy_module_params(struct usbnet *usbdev)
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
-	char buf[8];
-
-	/* Early initialization settings, setting these won't have effect
-	 * if called after generic_rndis_bind().
-	 */
 
 	priv->param_country[0] = modparam_country[0];
 	priv->param_country[1] = modparam_country[1];
@@ -2652,6 +2638,27 @@ static int bcm4320b_early_init(struct usbnet *usbdev)
 		priv->param_workaround_interval = 500;
 	else
 		priv->param_workaround_interval = modparam_workaround_interval;
+}
+
+static int bcm4320a_early_init(struct usbnet *usbdev)
+{
+	/* bcm4320a doesn't handle configuration parameters well. Try
+	 * set any and you get partially zeroed mac and broken device.
+	 */
+
+	return 0;
+}
+
+static int bcm4320b_early_init(struct usbnet *usbdev)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	char buf[8];
+
+	rndis_copy_module_params(usbdev);
+
+	/* Early initialization settings, setting these won't have effect
+	 * if called after generic_rndis_bind().
+	 */
 
 	rndis_set_config_parameter_str(usbdev, "Country", priv->param_country);
 	rndis_set_config_parameter_str(usbdev, "FrameBursting",
-- 
cgit v1.2.3


From 6e850af58f93be8f1b4b79eb9c79d06788f38e78 Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Mon, 30 Nov 2009 21:50:13 +0200
Subject: rndis_wlan: copy module parameters for bcm4320a devices too

rndis_wlan didn't copy module parameters for bcm4320a to private structure.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rndis_wlan.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 8dd9224c2d4e..305c106fdc1c 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2642,6 +2642,11 @@ static void rndis_copy_module_params(struct usbnet *usbdev)
 
 static int bcm4320a_early_init(struct usbnet *usbdev)
 {
+	/* copy module parameters for bcm4320a so that iwconfig reports txpower
+	 * and workaround parameter is copied to private structure correctly.
+	 */
+	rndis_copy_module_params(usbdev);
+
 	/* bcm4320a doesn't handle configuration parameters well. Try
 	 * set any and you get partially zeroed mac and broken device.
 	 */
-- 
cgit v1.2.3


From 4a40ccf8140d6b973d8b02dd5467b1fd876c0654 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 12 Dec 2009 18:04:46 -0600
Subject: rtl8180: Remove usage of deprecated 'qual'
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When building rtl8180, the following warning occurs:

  CC [M]  drivers/net/wireless/rtl818x/rtl8180_dev.o
drivers/net/wireless/rtl818x/rtl8180_dev.c: In function ‘rtl8180_handle_rx’:
drivers/net/wireless/rtl818x/rtl8180_dev.c:135: warning: ‘qual’ is deprecated
    (declared at include/net/mac80211.h:562)

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index a1a3dd15c664..8a40a1439984 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -132,7 +132,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 
 			rx_status.antenna = (flags2 >> 15) & 1;
 			/* TODO: improve signal/rssi reporting */
-			rx_status.qual = flags2 & 0xFF;
 			rx_status.signal = (flags2 >> 8) & 0x7F;
 			/* XXX: is this correct? */
 			rx_status.rate_idx = (flags >> 20) & 0xF;
-- 
cgit v1.2.3


From 3a41bbd515d449604f3488c5f8dd62802f09d19b Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Thu, 10 Dec 2009 14:37:24 -0800
Subject: iwlwifi: log CT_CARD_DISABLED flag

Change name from RF_CARD_DISABLED to CT_CARD_DISABLED to match the
indication from uCode, also log the debug message when the condition
detected in iwl_rx_card_state_notif()

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 12 +++++++-----
 drivers/net/wireless/iwlwifi/iwl-commands.h |  2 +-
 2 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index b8377efb3ba7..954b8ae2c880 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -689,12 +689,14 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
-	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
+	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
 			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
-			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
+			  (flags & SW_CARD_DISABLED) ? "Kill" : "On",
+			  (flags & CT_CARD_DISABLED) ?
+			  "Reached" : "Not reached");
 
 	if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
-		     RF_CARD_DISABLED)) {
+		     CT_CARD_DISABLED)) {
 
 		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 			    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
@@ -708,10 +710,10 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 			iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 		}
-		if (flags & RF_CARD_DISABLED)
+		if (flags & CT_CARD_DISABLED)
 			iwl_tt_enter_ct_kill(priv);
 	}
-	if (!(flags & RF_CARD_DISABLED))
+	if (!(flags & CT_CARD_DISABLED))
 		iwl_tt_exit_ct_kill(priv);
 
 	if (flags & HW_CARD_DISABLED)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index e91507531923..28f3800c560e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2510,7 +2510,7 @@ struct iwl_card_state_notif {
 
 #define HW_CARD_DISABLED   0x01
 #define SW_CARD_DISABLED   0x02
-#define RF_CARD_DISABLED   0x04
+#define CT_CARD_DISABLED   0x04
 #define RXON_CARD_DISABLED 0x10
 
 struct iwl_ct_kill_config {
-- 
cgit v1.2.3


From 696bdee3ba216186e21997d20a839b76158346e6 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Thu, 10 Dec 2009 14:37:25 -0800
Subject: iwlwifi: dump "Control and Status Register" when detect uCode HW/SW
 error

When uCode HW/SW error detected, dumping important CSR (Control and Status
Registers) values.
Also add "csr" debugfs file to dump the current values of CSR defined in
CSR table to syslog.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c    |  1 +
 drivers/net/wireless/iwlwifi/iwl-5000.c    |  2 +
 drivers/net/wireless/iwlwifi/iwl-6000.c    |  1 +
 drivers/net/wireless/iwlwifi/iwl-core.c    | 73 ++++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-core.h    |  2 +
 drivers/net/wireless/iwlwifi/iwl-debug.h   |  1 +
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 25 ++++++++++
 7 files changed, 105 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 8414178bcff4..9d4fdd7a1134 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -105,6 +105,7 @@ static struct iwl_lib_ops iwl1000_lib = {
 	.load_ucode = iwl5000_load_ucode,
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.dump_csr = iwl_dump_csr,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index e2f8615c8c9b..5a277cdffd07 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1465,6 +1465,7 @@ struct iwl_lib_ops iwl5000_lib = {
 	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.dump_csr = iwl_dump_csr,
 	.load_ucode = iwl5000_load_ucode,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
@@ -1517,6 +1518,7 @@ static struct iwl_lib_ops iwl5150_lib = {
 	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.dump_csr = iwl_dump_csr,
 	.load_ucode = iwl5000_load_ucode,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 74e571049273..fec43771c49e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -215,6 +215,7 @@ static struct iwl_lib_ops iwl6000_lib = {
 	.load_ucode = iwl5000_load_ucode,
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.dump_csr = iwl_dump_csr,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 574d36658702..47ece91e4505 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1363,6 +1363,8 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 
 	priv->cfg->ops->lib->dump_nic_error_log(priv);
+	if (priv->cfg->ops->lib->dump_csr)
+		priv->cfg->ops->lib->dump_csr(priv);
 	priv->cfg->ops->lib->dump_nic_event_log(priv, false);
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)
@@ -3191,6 +3193,77 @@ void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len)
 EXPORT_SYMBOL(iwl_update_stats);
 #endif
 
+const static char *get_csr_string(int cmd)
+{
+	switch (cmd) {
+		IWL_CMD(CSR_HW_IF_CONFIG_REG);
+		IWL_CMD(CSR_INT_COALESCING);
+		IWL_CMD(CSR_INT);
+		IWL_CMD(CSR_INT_MASK);
+		IWL_CMD(CSR_FH_INT_STATUS);
+		IWL_CMD(CSR_GPIO_IN);
+		IWL_CMD(CSR_RESET);
+		IWL_CMD(CSR_GP_CNTRL);
+		IWL_CMD(CSR_HW_REV);
+		IWL_CMD(CSR_EEPROM_REG);
+		IWL_CMD(CSR_EEPROM_GP);
+		IWL_CMD(CSR_OTP_GP_REG);
+		IWL_CMD(CSR_GIO_REG);
+		IWL_CMD(CSR_GP_UCODE_REG);
+		IWL_CMD(CSR_GP_DRIVER_REG);
+		IWL_CMD(CSR_UCODE_DRV_GP1);
+		IWL_CMD(CSR_UCODE_DRV_GP2);
+		IWL_CMD(CSR_LED_REG);
+		IWL_CMD(CSR_DRAM_INT_TBL_REG);
+		IWL_CMD(CSR_GIO_CHICKEN_BITS);
+		IWL_CMD(CSR_ANA_PLL_CFG);
+		IWL_CMD(CSR_HW_REV_WA_REG);
+		IWL_CMD(CSR_DBG_HPET_MEM_REG);
+	default:
+		return "UNKNOWN";
+
+	}
+}
+
+void iwl_dump_csr(struct iwl_priv *priv)
+{
+	int i;
+	u32 csr_tbl[] = {
+		CSR_HW_IF_CONFIG_REG,
+		CSR_INT_COALESCING,
+		CSR_INT,
+		CSR_INT_MASK,
+		CSR_FH_INT_STATUS,
+		CSR_GPIO_IN,
+		CSR_RESET,
+		CSR_GP_CNTRL,
+		CSR_HW_REV,
+		CSR_EEPROM_REG,
+		CSR_EEPROM_GP,
+		CSR_OTP_GP_REG,
+		CSR_GIO_REG,
+		CSR_GP_UCODE_REG,
+		CSR_GP_DRIVER_REG,
+		CSR_UCODE_DRV_GP1,
+		CSR_UCODE_DRV_GP2,
+		CSR_LED_REG,
+		CSR_DRAM_INT_TBL_REG,
+		CSR_GIO_CHICKEN_BITS,
+		CSR_ANA_PLL_CFG,
+		CSR_HW_REV_WA_REG,
+		CSR_DBG_HPET_MEM_REG
+	};
+	IWL_ERR(priv, "CSR values:\n");
+	IWL_ERR(priv, "(2nd byte of CSR_INT_COALESCING is "
+		"CSR_INT_PERIODIC_REG)\n");
+	for (i = 0; i <  ARRAY_SIZE(csr_tbl); i++) {
+		IWL_ERR(priv, "  %25s: 0X%08x\n",
+			get_csr_string(csr_tbl[i]),
+			iwl_read32(priv, csr_tbl[i]));
+	}
+}
+EXPORT_SYMBOL(iwl_dump_csr);
+
 #ifdef CONFIG_PM
 
 int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 675b7df632fc..f5e79cf0a318 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -171,6 +171,7 @@ struct iwl_lib_ops {
 	int (*load_ucode)(struct iwl_priv *priv);
 	void (*dump_nic_event_log)(struct iwl_priv *priv, bool full_log);
 	void (*dump_nic_error_log)(struct iwl_priv *priv);
+	void (*dump_csr)(struct iwl_priv *priv);
 	int (*set_channel_switch)(struct iwl_priv *priv, u16 channel);
 	/* power management */
 	struct iwl_apm_ops apm_ops;
@@ -582,6 +583,7 @@ int iwl_pci_resume(struct pci_dev *pdev);
 ******************************************************/
 void iwl_dump_nic_error_log(struct iwl_priv *priv);
 void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log);
+void iwl_dump_csr(struct iwl_priv *priv);
 #ifdef CONFIG_IWLWIFI_DEBUG
 void iwl_print_rx_config_cmd(struct iwl_priv *priv);
 #else
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index d61293ab67c9..86a67672598d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -109,6 +109,7 @@ struct iwl_debugfs {
 		struct dentry *file_power_save_status;
 		struct dentry *file_clear_ucode_statistics;
 		struct dentry *file_clear_traffic_statistics;
+		struct dentry *file_csr;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 21e0f6699daf..2be3549be01d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1845,6 +1845,28 @@ static ssize_t iwl_dbgfs_clear_ucode_statistics_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_csr_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int csr;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &csr) != 1)
+		return -EFAULT;
+
+	if (priv->cfg->ops->lib->dump_csr)
+		priv->cfg->ops->lib->dump_csr(priv);
+
+	return count;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -1859,6 +1881,7 @@ DEBUGFS_READ_FILE_OPS(tx_power);
 DEBUGFS_READ_FILE_OPS(power_save_status);
 DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics);
 DEBUGFS_WRITE_FILE_OPS(clear_traffic_statistics);
+DEBUGFS_WRITE_FILE_OPS(csr);
 
 /*
  * Create the debugfs files and directories
@@ -1909,6 +1932,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(power_save_status, debug, S_IRUSR);
 	DEBUGFS_ADD_FILE(clear_ucode_statistics, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(clear_traffic_statistics, debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(csr, debug, S_IWUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
@@ -1966,6 +1990,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 			file_clear_ucode_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_clear_traffic_statistics);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_csr);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
-- 
cgit v1.2.3


From a9e1cb6a78ea8a74c49bf76726a2942f636a833b Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Thu, 10 Dec 2009 14:37:26 -0800
Subject: iwlwifi: add continuous uCode event log capability

In order to help uCode debugging, adding the capability to provide
continuous uCode event logging function.

uCode events is located in round-robin event queue and filled by uCode,
by enable continuous event logging, driver check the write pointer
and log the newly added events in iwl_bg_ucode_trace() timer function.

There is still possibility of missing events if event queue being
wrapped before next event dump; but with this capability, we can have
much better understanding of the uCode behavior during runtime; it can
help to debug the uCode related issues.

Methods to enable/disable the continuous event log:
step 1: enable ucode trace timer
     "echo 1 >
/sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing"
step 2: start ftrace
     sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d
step 3: stop ftrace
     sudo ./trace-cmd report trace.dat
step 4: disable ucode trace timer
     "echo 0 >
/sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing"

use "ucode_tracing" debugfs file to display number of event
queue wrapped when driver attempt the continuous event logging. If event
queue being wrapped more than once when driver has opportunity to log
the event; it indicated there are events missing in the event log trace.

This continuous event log function only available for 4965 and newer
NICs.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 130 ++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-debug.h    |   1 +
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  |  56 ++++++++++++
 drivers/net/wireless/iwlwifi/iwl-dev.h      |  29 +++++++
 drivers/net/wireless/iwlwifi/iwl-devtrace.c |   2 +
 drivers/net/wireless/iwlwifi/iwl-devtrace.h |  44 ++++++++++
 6 files changed, 262 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 954b8ae2c880..4d85c28e38e2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -657,6 +657,131 @@ static void iwl_bg_statistics_periodic(unsigned long data)
 	iwl_send_statistics_request(priv, CMD_ASYNC, false);
 }
 
+
+static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
+					u32 start_idx, u32 num_events,
+					u32 mode)
+{
+	u32 i;
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+
+	if (mode == 0)
+		ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
+	else
+		ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (iwl_grab_nic_access(priv)) {
+		spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+		return;
+	}
+
+	/* Set starting address; reads will auto-increment */
+	_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
+	rmb();
+
+	/*
+	 * "time" is actually "data" for mode 0 (no timestamp).
+	 * place event id # at far right for easier visual parsing.
+	 */
+	for (i = 0; i < num_events; i++) {
+		ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			trace_iwlwifi_dev_ucode_cont_event(priv,
+							0, time, ev);
+		} else {
+			data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+			trace_iwlwifi_dev_ucode_cont_event(priv,
+						time, data, ev);
+		}
+	}
+	/* Allow device to power down */
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+}
+
+void iwl_continuous_event_trace(struct iwl_priv *priv)
+{
+	u32 capacity;   /* event log capacity in # entries */
+	u32 base;       /* SRAM byte address of event log header */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+	if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+		capacity = iwl_read_targ_mem(priv, base);
+		num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
+		mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
+		next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
+	} else
+		return;
+
+	if (num_wraps == priv->event_log.num_wraps) {
+		iwl_print_cont_event_trace(priv,
+				       base, priv->event_log.next_entry,
+				       next_entry - priv->event_log.next_entry,
+				       mode);
+		priv->event_log.non_wraps_count++;
+	} else {
+		if ((num_wraps - priv->event_log.num_wraps) > 1)
+			priv->event_log.wraps_more_count++;
+		else
+			priv->event_log.wraps_once_count++;
+		trace_iwlwifi_dev_ucode_wrap_event(priv,
+				num_wraps - priv->event_log.num_wraps,
+				next_entry, priv->event_log.next_entry);
+		if (next_entry < priv->event_log.next_entry) {
+			iwl_print_cont_event_trace(priv, base,
+			       priv->event_log.next_entry,
+			       capacity - priv->event_log.next_entry,
+			       mode);
+
+			iwl_print_cont_event_trace(priv, base, 0,
+				next_entry, mode);
+		} else {
+			iwl_print_cont_event_trace(priv, base,
+			       next_entry, capacity - next_entry,
+			       mode);
+
+			iwl_print_cont_event_trace(priv, base, 0,
+				next_entry, mode);
+		}
+	}
+	priv->event_log.num_wraps = num_wraps;
+	priv->event_log.next_entry = next_entry;
+}
+
+/**
+ * iwl_bg_ucode_trace - Timer callback to log ucode event
+ *
+ * The timer is continually set to execute every
+ * UCODE_TRACE_PERIOD milliseconds after the last timer expired
+ * this function is to perform continuous uCode event logging operation
+ * if enabled
+ */
+static void iwl_bg_ucode_trace(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (priv->event_log.ucode_trace) {
+		iwl_continuous_event_trace(priv);
+		/* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
+		mod_timer(&priv->ucode_trace,
+			 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
+	}
+}
+
 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
@@ -3128,6 +3253,10 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	priv->statistics_periodic.data = (unsigned long)priv;
 	priv->statistics_periodic.function = iwl_bg_statistics_periodic;
 
+	init_timer(&priv->ucode_trace);
+	priv->ucode_trace.data = (unsigned long)priv;
+	priv->ucode_trace.function = iwl_bg_ucode_trace;
+
 	if (!priv->cfg->use_isr_legacy)
 		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
 			iwl_irq_tasklet, (unsigned long)priv);
@@ -3146,6 +3275,7 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
 	cancel_delayed_work(&priv->alive_start);
 	cancel_work_sync(&priv->beacon_update);
 	del_timer_sync(&priv->statistics_periodic);
+	del_timer_sync(&priv->ucode_trace);
 }
 
 static void iwl_init_hw_rates(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 86a67672598d..58e0462cafa3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -110,6 +110,7 @@ struct iwl_debugfs {
 		struct dentry *file_clear_ucode_statistics;
 		struct dentry *file_clear_traffic_statistics;
 		struct dentry *file_csr;
+		struct dentry *file_ucode_tracing;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 2be3549be01d..822de46e4f34 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1867,6 +1867,58 @@ static ssize_t iwl_dbgfs_csr_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_ucode_tracing_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	char buf[128];
+	const size_t bufsz = sizeof(buf);
+	ssize_t ret;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "ucode trace timer is %s\n",
+			priv->event_log.ucode_trace ? "On" : "Off");
+	pos += scnprintf(buf + pos, bufsz - pos, "non_wraps_count:\t\t %u\n",
+			priv->event_log.non_wraps_count);
+	pos += scnprintf(buf + pos, bufsz - pos, "wraps_once_count:\t\t %u\n",
+			priv->event_log.wraps_once_count);
+	pos += scnprintf(buf + pos, bufsz - pos, "wraps_more_count:\t\t %u\n",
+			priv->event_log.wraps_more_count);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_tracing_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int trace;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &trace) != 1)
+		return -EFAULT;
+
+	if (trace) {
+		priv->event_log.ucode_trace = true;
+		/* schedule the ucode timer to occur in UCODE_TRACE_PERIOD */
+		mod_timer(&priv->ucode_trace,
+			jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
+	} else {
+		priv->event_log.ucode_trace = false;
+		del_timer_sync(&priv->ucode_trace);
+	}
+
+	return count;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -1882,6 +1934,7 @@ DEBUGFS_READ_FILE_OPS(power_save_status);
 DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics);
 DEBUGFS_WRITE_FILE_OPS(clear_traffic_statistics);
 DEBUGFS_WRITE_FILE_OPS(csr);
+DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing);
 
 /*
  * Create the debugfs files and directories
@@ -1939,6 +1992,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 		DEBUGFS_ADD_FILE(ucode_general_stats, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(sensitivity, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(chain_noise, debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_tracing, debug, S_IWUSR | S_IRUSR);
 	}
 	DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
 	DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
@@ -2002,6 +2056,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 			file_sensitivity);
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_chain_noise);
+		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+			file_ucode_tracing);
 	}
 	DEBUGFS_REMOVE(priv->dbgfs->dir_debug);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 2673e9a4db92..b3a29c7cdbc0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -984,6 +984,32 @@ struct iwl_switch_rxon {
 	__le16 channel;
 };
 
+/*
+ * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
+ * to perform continuous uCode event logging operation if enabled
+ */
+#define UCODE_TRACE_PERIOD (100)
+
+/*
+ * iwl_event_log: current uCode event log position
+ *
+ * @ucode_trace: enable/disable ucode continuous trace timer
+ * @num_wraps: how many times the event buffer wraps
+ * @next_entry:  the entry just before the next one that uCode would fill
+ * @non_wraps_count: counter for no wrap detected when dump ucode events
+ * @wraps_once_count: counter for wrap once detected when dump ucode events
+ * @wraps_more_count: counter for wrap more than once detected
+ *		      when dump ucode events
+ */
+struct iwl_event_log {
+	bool ucode_trace;
+	u32 num_wraps;
+	u32 next_entry;
+	int non_wraps_count;
+	int wraps_once_count;
+	int wraps_more_count;
+};
+
 struct iwl_priv {
 
 	/* ieee device used by generic ieee processing code */
@@ -1261,6 +1287,7 @@ struct iwl_priv {
 	u32 disable_tx_power_cal;
 	struct work_struct run_time_calib_work;
 	struct timer_list statistics_periodic;
+	struct timer_list ucode_trace;
 	bool hw_ready;
 	/*For 3945*/
 #define IWL_DEFAULT_TX_POWER 0x0F
@@ -1268,6 +1295,8 @@ struct iwl_priv {
 	struct iwl3945_notif_statistics statistics_39;
 
 	u32 sta_supp_rates;
+
+	struct iwl_event_log event_log;
 }; /*iwl_priv */
 
 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
index e7d88d1da15d..bf46308b17fa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
@@ -11,4 +11,6 @@ EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_iowrite32);
 EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_rx);
 EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_event);
 EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_error);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_cont_event);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_wrap_event);
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index 21361968ab7e..0819f990be6c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -64,6 +64,50 @@ TRACE_EVENT(iwlwifi_dev_iowrite32,
 	TP_printk("[%p] write io[%#x] = %#x)", __entry->priv, __entry->offs, __entry->val)
 );
 
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM iwlwifi_ucode
+
+TRACE_EVENT(iwlwifi_dev_ucode_cont_event,
+	TP_PROTO(struct iwl_priv *priv, u32 time, u32 data, u32 ev),
+	TP_ARGS(priv, time, data, ev),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+
+		__field(u32, time)
+		__field(u32, data)
+		__field(u32, ev)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->time = time;
+		__entry->data = data;
+		__entry->ev = ev;
+	),
+	TP_printk("[%p] EVT_LOGT:%010u:0x%08x:%04u",
+		  __entry->priv, __entry->time, __entry->data, __entry->ev)
+);
+
+TRACE_EVENT(iwlwifi_dev_ucode_wrap_event,
+	TP_PROTO(struct iwl_priv *priv, u32 wraps, u32 n_entry, u32 p_entry),
+	TP_ARGS(priv, wraps, n_entry, p_entry),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+
+		__field(u32, wraps)
+		__field(u32, n_entry)
+		__field(u32, p_entry)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->wraps = wraps;
+		__entry->n_entry = n_entry;
+		__entry->p_entry = p_entry;
+	),
+	TP_printk("[%p] wraps=#%02d n=0x%X p=0x%X",
+		  __entry->priv, __entry->wraps, __entry->n_entry,
+		  __entry->p_entry)
+);
+
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM iwlwifi
 
-- 
cgit v1.2.3


From b03d7d0fd3d23b7cf130fa702f4ae3b1bc827d4b Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Mon, 14 Dec 2009 14:12:20 -0800
Subject: iwlwifi: on-screen event log dump

This feature enables the on-screen uCode event log dump. The original
method will append the event log to syslog; with this capability,
we also enable the user to write script to capture the
events which provide additional flexibility to help uCode debugging

Method
1) change to debugfs directory (sys/kernel/debug/phyX/iwlagn/data)
2) #cat log_event

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.h     |   3 +-
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 104 +++++++++++++++++++---------
 drivers/net/wireless/iwlwifi/iwl-core.c     |   2 +-
 drivers/net/wireless/iwlwifi/iwl-core.h     |   6 +-
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  |  24 ++++++-
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 101 +++++++++++++++++++--------
 6 files changed, 171 insertions(+), 69 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ecc23ec1f6a4..28f6eb5f2cba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -227,7 +227,8 @@ extern void iwl3945_rx_replenish(void *data);
 extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
 					struct ieee80211_hdr *hdr,int left);
-extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log);
+extern int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+				       char **buf, bool display);
 extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 4d85c28e38e2..0b3669f317a4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1832,8 +1832,9 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
  * iwl_print_event_log - Dump error event log to syslog
  *
  */
-static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
-				u32 num_events, u32 mode)
+static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+			       u32 num_events, u32 mode,
+			       int pos, char **buf, size_t bufsz)
 {
 	u32 i;
 	u32 base;       /* SRAM byte address of event log header */
@@ -1843,7 +1844,7 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
 	unsigned long reg_flags;
 
 	if (num_events == 0)
-		return;
+		return pos;
 	if (priv->ucode_type == UCODE_INIT)
 		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
 	else
@@ -1871,27 +1872,44 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
 		time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 		if (mode == 0) {
 			/* data, ev */
-			trace_iwlwifi_dev_ucode_event(priv, 0, time, ev);
-			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOG:0x%08x:%04u\n",
+						time, ev);
+			} else {
+				trace_iwlwifi_dev_ucode_event(priv, 0,
+					time, ev);
+				IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
+					time, ev);
+			}
 		} else {
 			data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOGT:%010u:0x%08x:%04u\n",
+						 time, data, ev);
+			} else {
+				IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
 					time, data, ev);
-			trace_iwlwifi_dev_ucode_event(priv, time, data, ev);
+				trace_iwlwifi_dev_ucode_event(priv, time,
+					data, ev);
+			}
 		}
 	}
 
 	/* Allow device to power down */
 	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return pos;
 }
 
 /**
  * iwl_print_last_event_logs - Dump the newest # of event log to syslog
  */
-static void iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
-				      u32 num_wraps, u32 next_entry,
-				      u32 size, u32 mode)
+static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+				    u32 num_wraps, u32 next_entry,
+				    u32 size, u32 mode,
+				    int pos, char **buf, size_t bufsz)
 {
 	/*
 	 * display the newest DEFAULT_LOG_ENTRIES entries
@@ -1899,21 +1917,26 @@ static void iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
 	 */
 	if (num_wraps) {
 		if (next_entry < size) {
-			iwl_print_event_log(priv,
-					capacity - (size - next_entry),
-					size - next_entry, mode);
-			iwl_print_event_log(priv, 0,
-				    next_entry, mode);
+			pos = iwl_print_event_log(priv,
+						capacity - (size - next_entry),
+						size - next_entry, mode,
+						pos, buf, bufsz);
+			pos = iwl_print_event_log(priv, 0,
+						  next_entry, mode,
+						  pos, buf, bufsz);
 		} else
-			iwl_print_event_log(priv, next_entry - size,
-				    size, mode);
+			pos = iwl_print_event_log(priv, next_entry - size,
+						  size, mode, pos, buf, bufsz);
 	} else {
-		if (next_entry < size)
-			iwl_print_event_log(priv, 0, next_entry, mode);
-		else
-			iwl_print_event_log(priv, next_entry - size,
-					    size, mode);
+		if (next_entry < size) {
+			pos = iwl_print_event_log(priv, 0, next_entry,
+						  mode, pos, buf, bufsz);
+		} else {
+			pos = iwl_print_event_log(priv, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+		}
 	}
+	return pos;
 }
 
 /* For sanity check only.  Actual size is determined by uCode, typ. 512 */
@@ -1921,7 +1944,8 @@ static void iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
 
 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
 
-void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
+int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+			    char **buf, bool display)
 {
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
@@ -1929,6 +1953,8 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 	u32 num_wraps;  /* # times uCode wrapped to top of log */
 	u32 next_entry; /* index of next entry to be written by uCode */
 	u32 size;       /* # entries that we'll print */
+	int pos = 0;
+	size_t bufsz = 0;
 
 	if (priv->ucode_type == UCODE_INIT)
 		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
@@ -1939,7 +1965,7 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 		IWL_ERR(priv,
 			"Invalid event log pointer 0x%08X for %s uCode\n",
 			base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
-		return;
+		return pos;
 	}
 
 	/* event log header */
@@ -1965,7 +1991,7 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 	/* bail out if nothing in log */
 	if (size == 0) {
 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		return;
+		return pos;
 	}
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -1980,6 +2006,15 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 		size);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
+	if (display) {
+		if (full_log)
+			bufsz = capacity * 48;
+		else
+			bufsz = size * 48;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return pos;
+	}
 	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
 		/*
 		 * if uCode has wrapped back to top of log,
@@ -1987,17 +2022,22 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 		 * i.e the next one that uCode would fill.
 		 */
 		if (num_wraps)
-			iwl_print_event_log(priv, next_entry,
-					    capacity - next_entry, mode);
+			pos = iwl_print_event_log(priv, next_entry,
+						capacity - next_entry, mode,
+						pos, buf, bufsz);
 		/* (then/else) start at top of log */
-		iwl_print_event_log(priv, 0, next_entry, mode);
+		pos = iwl_print_event_log(priv, 0,
+					  next_entry, mode, pos, buf, bufsz);
 	} else
-		iwl_print_last_event_logs(priv, capacity, num_wraps,
-					next_entry, size, mode);
+		pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
+						next_entry, size, mode,
+						pos, buf, bufsz);
 #else
-	iwl_print_last_event_logs(priv, capacity, num_wraps,
-				next_entry, size, mode);
+	pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
+					next_entry, size, mode,
+					pos, buf, bufsz);
 #endif
+	return pos;
 }
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 47ece91e4505..c3c31dc9fd4d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1365,7 +1365,7 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 	priv->cfg->ops->lib->dump_nic_error_log(priv);
 	if (priv->cfg->ops->lib->dump_csr)
 		priv->cfg->ops->lib->dump_csr(priv);
-	priv->cfg->ops->lib->dump_nic_event_log(priv, false);
+	priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false);
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)
 		iwl_print_rx_config_cmd(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index f5e79cf0a318..650d3808d24a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -169,7 +169,8 @@ struct iwl_lib_ops {
 	int (*is_valid_rtc_data_addr)(u32 addr);
 	/* 1st ucode load */
 	int (*load_ucode)(struct iwl_priv *priv);
-	void (*dump_nic_event_log)(struct iwl_priv *priv, bool full_log);
+	int (*dump_nic_event_log)(struct iwl_priv *priv,
+				  bool full_log, char **buf, bool display);
 	void (*dump_nic_error_log)(struct iwl_priv *priv);
 	void (*dump_csr)(struct iwl_priv *priv);
 	int (*set_channel_switch)(struct iwl_priv *priv, u16 channel);
@@ -582,7 +583,8 @@ int iwl_pci_resume(struct pci_dev *pdev);
 *  Error Handling Debugging
 ******************************************************/
 void iwl_dump_nic_error_log(struct iwl_priv *priv);
-void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log);
+int iwl_dump_nic_event_log(struct iwl_priv *priv,
+			   bool full_log, char **buf, bool display);
 void iwl_dump_csr(struct iwl_priv *priv);
 #ifdef CONFIG_IWLWIFI_DEBUG
 void iwl_print_rx_config_cmd(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 822de46e4f34..ee5aed12a4b1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -420,6 +420,23 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 	return ret;
 }
 
+static ssize_t iwl_dbgfs_log_event_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char *buf;
+	int pos = 0;
+	ssize_t ret = -ENOMEM;
+
+	pos = priv->cfg->ops->lib->dump_nic_event_log(priv, true, &buf, true);
+	if (pos && buf) {
+		ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+		kfree(buf);
+	}
+	return ret;
+}
+
 static ssize_t iwl_dbgfs_log_event_write(struct file *file,
 					const char __user *user_buf,
 					size_t count, loff_t *ppos)
@@ -436,7 +453,8 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file,
 	if (sscanf(buf, "%d", &event_log_flag) != 1)
 		return -EFAULT;
 	if (event_log_flag == 1)
-		priv->cfg->ops->lib->dump_nic_event_log(priv, true);
+		priv->cfg->ops->lib->dump_nic_event_log(priv, true,
+							NULL, false);
 
 	return count;
 }
@@ -859,7 +877,7 @@ static ssize_t iwl_dbgfs_current_sleep_command_read(struct file *file,
 }
 
 DEBUGFS_READ_WRITE_FILE_OPS(sram);
-DEBUGFS_WRITE_FILE_OPS(log_event);
+DEBUGFS_READ_WRITE_FILE_OPS(log_event);
 DEBUGFS_READ_FILE_OPS(nvm);
 DEBUGFS_READ_FILE_OPS(stations);
 DEBUGFS_READ_FILE_OPS(channels);
@@ -1965,7 +1983,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_DIR(debug, dbgfs->dir_drv);
 	DEBUGFS_ADD_FILE(nvm, data, S_IRUSR);
 	DEBUGFS_ADD_FILE(sram, data, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(log_event, data, S_IWUSR);
+	DEBUGFS_ADD_FILE(log_event, data, S_IWUSR | S_IRUSR);
 	DEBUGFS_ADD_FILE(stations, data, S_IRUSR);
 	DEBUGFS_ADD_FILE(channels, data, S_IRUSR);
 	DEBUGFS_ADD_FILE(status, data, S_IRUSR);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 2a28a1f8b1fe..f7c7ff4264fb 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1560,8 +1560,9 @@ void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
  * iwl3945_print_event_log - Dump error event log to syslog
  *
  */
-static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
-				u32 num_events, u32 mode)
+static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
+				  u32 num_events, u32 mode,
+				  int pos, char **buf, size_t bufsz)
 {
 	u32 i;
 	u32 base;       /* SRAM byte address of event log header */
@@ -1571,7 +1572,7 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 	unsigned long reg_flags;
 
 	if (num_events == 0)
-		return;
+		return pos;
 
 	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 
@@ -1597,26 +1598,43 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 		time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 		if (mode == 0) {
 			/* data, ev */
-			IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
-			trace_iwlwifi_dev_ucode_event(priv, 0, time, ev);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"0x%08x:%04u\n",
+						time, ev);
+			} else {
+				IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
+				trace_iwlwifi_dev_ucode_event(priv, 0,
+							      time, ev);
+			}
 		} else {
 			data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-			IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", time, data, ev);
-			trace_iwlwifi_dev_ucode_event(priv, time, data, ev);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"%010u:0x%08x:%04u\n",
+						 time, data, ev);
+			} else {
+				IWL_ERR(priv, "%010u\t0x%08x\t%04u\n",
+					time, data, ev);
+				trace_iwlwifi_dev_ucode_event(priv, time,
+							      data, ev);
+			}
 		}
 	}
 
 	/* Allow device to power down */
 	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return pos;
 }
 
 /**
  * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
  */
-static void iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
 				      u32 num_wraps, u32 next_entry,
-				      u32 size, u32 mode)
+				      u32 size, u32 mode,
+				      int pos, char **buf, size_t bufsz)
 {
 	/*
 	 * display the newest DEFAULT_LOG_ENTRIES entries
@@ -1624,21 +1642,28 @@ static void iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
 	 */
 	if (num_wraps) {
 		if (next_entry < size) {
-			iwl3945_print_event_log(priv,
-					capacity - (size - next_entry),
-					size - next_entry, mode);
-			iwl3945_print_event_log(priv, 0,
-				    next_entry, mode);
+			pos = iwl3945_print_event_log(priv,
+					     capacity - (size - next_entry),
+					     size - next_entry, mode,
+					     pos, buf, bufsz);
+			pos = iwl3945_print_event_log(priv, 0,
+						      next_entry, mode,
+						      pos, buf, bufsz);
 		} else
-			iwl3945_print_event_log(priv, next_entry - size,
-				    size, mode);
+			pos = iwl3945_print_event_log(priv, next_entry - size,
+						      size, mode,
+						      pos, buf, bufsz);
 	} else {
 		if (next_entry < size)
-			iwl3945_print_event_log(priv, 0, next_entry, mode);
+			pos = iwl3945_print_event_log(priv, 0,
+						      next_entry, mode,
+						      pos, buf, bufsz);
 		else
-			iwl3945_print_event_log(priv, next_entry - size,
-					    size, mode);
+			pos = iwl3945_print_event_log(priv, next_entry - size,
+						      size, mode,
+						      pos, buf, bufsz);
 	}
+	return pos;
 }
 
 /* For sanity check only.  Actual size is determined by uCode, typ. 512 */
@@ -1646,7 +1671,8 @@ static void iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
 
 #define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
 
-void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
+int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+			    char **buf, bool display)
 {
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
@@ -1654,11 +1680,13 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 	u32 num_wraps;  /* # times uCode wrapped to top of log */
 	u32 next_entry; /* index of next entry to be written by uCode */
 	u32 size;       /* # entries that we'll print */
+	int pos = 0;
+	size_t bufsz = 0;
 
 	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
 		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
-		return;
+		return pos;
 	}
 
 	/* event log header */
@@ -1684,7 +1712,7 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 	/* bail out if nothing in log */
 	if (size == 0) {
 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		return;
+		return pos;
 	}
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -1700,25 +1728,38 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 		  size);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
+	if (display) {
+		if (full_log)
+			bufsz = capacity * 48;
+		else
+			bufsz = size * 48;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return pos;
+	}
 	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
 		/* if uCode has wrapped back to top of log,
 		 * start at the oldest entry,
 		 * i.e the next one that uCode would fill.
 		 */
 		if (num_wraps)
-			iwl3945_print_event_log(priv, next_entry,
-				    capacity - next_entry, mode);
+			pos = iwl3945_print_event_log(priv, next_entry,
+						capacity - next_entry, mode,
+						pos, buf, bufsz);
 
 		/* (then/else) start at top of log */
-		iwl3945_print_event_log(priv, 0, next_entry, mode);
+		pos = iwl3945_print_event_log(priv, 0, next_entry, mode,
+					      pos, buf, bufsz);
 	} else
-		iwl3945_print_last_event_logs(priv, capacity, num_wraps,
-					next_entry, size, mode);
+		pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
+						    next_entry, size, mode,
+						    pos, buf, bufsz);
 #else
-	iwl3945_print_last_event_logs(priv, capacity, num_wraps,
-				next_entry, size, mode);
+	pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
+					    next_entry, size, mode,
+					    pos, buf, bufsz);
 #endif
-
+	return pos;
 }
 
 static void iwl3945_irq_tasklet(struct iwl_priv *priv)
-- 
cgit v1.2.3


From 4309af2735825115a982acf4c2c868b5c5671e7f Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Mon, 14 Dec 2009 14:12:21 -0800
Subject: iwlwifi: remove extra error msg on sensitivity calibration

Do not need to log error when fail the sensitivity command, driver will send
sensitivity write command to uCode after each sensitivity calibration if
station is associated with AP. It is a normal case when user unload the module
or shutdown the system while still associated with the AP, since uCode already
on the way down, it will not reply the sensitivity write request; report
error in this case will give misleading information, remove the error checking
here to provide a clean shutdown if no other error detected.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-calib.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index 95a57b36a7ea..dc61906290e8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -414,7 +414,6 @@ static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
 /* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
 static int iwl_sensitivity_write(struct iwl_priv *priv)
 {
-	int ret = 0;
 	struct iwl_sensitivity_cmd cmd ;
 	struct iwl_sensitivity_data *data = NULL;
 	struct iwl_host_cmd cmd_out = {
@@ -477,11 +476,7 @@ static int iwl_sensitivity_write(struct iwl_priv *priv)
 	memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
 	       sizeof(u16)*HD_TABLE_SIZE);
 
-	ret = iwl_send_cmd(priv, &cmd_out);
-	if (ret)
-		IWL_ERR(priv, "SENSITIVITY_CMD failed\n");
-
-	return ret;
+	return iwl_send_cmd(priv, &cmd_out);
 }
 
 void iwl_init_sensitivity(struct iwl_priv *priv)
-- 
cgit v1.2.3


From 050e8a47dc8b056c880f380ffd01055669f8fe68 Mon Sep 17 00:00:00 2001
From: Kenichi HORIO <moattailk1@gmail.com>
Date: Fri, 4 Dec 2009 23:46:56 +0100
Subject: rt73usb: add WLI-U2-H54HP

Signed-off-by: Kenichi HORIO <moattailk1@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt73usb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ced3b6ab5e16..6ce88d3c3b65 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2354,6 +2354,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0411, 0x00d9), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
-- 
cgit v1.2.3


From c70762f9acad654002704f1e53436a0ba3356c31 Mon Sep 17 00:00:00 2001
From: Alban Browaeys <prahal@yahoo.com>
Date: Fri, 4 Dec 2009 23:46:57 +0100
Subject: rt2x00 : bail out of regbusy_read if device is removed.

platform rfkill is async thus we may try to read while the device is
already off.

Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00pci.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 0feb4d0e4668..801be436cf1d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -41,6 +41,9 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
 {
 	unsigned int i;
 
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return 0;
+
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 		rt2x00pci_register_read(rt2x00dev, offset, reg);
 		if (!rt2x00_get_field32(*reg, field))
-- 
cgit v1.2.3


From 6a325d856bc4509f29164fe42501b6909cf57dcf Mon Sep 17 00:00:00 2001
From: Alban Browaeys <prahal@yahoo.com>
Date: Fri, 4 Dec 2009 23:46:58 +0100
Subject: rt2x00 : modify padding location.

The padding is to be added between header and payload for the only header need
padding case.

Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr>
Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 239afc7a9c0b..842c4e3c83ca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -197,7 +197,7 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 		 * the payload is already properly aligned.
 		 */
 		skb_push(skb, header_align);
-		memmove(skb->data, skb->data + header_align, frame_length);
+		memmove(skb->data, skb->data + header_align, header_length);
 		skbdesc->flags |= SKBDESC_L2_PADDED;
 	} else {
 		/*
-- 
cgit v1.2.3


From e81e0aef32bfa7f593b14479b9c7eaa7196798ac Mon Sep 17 00:00:00 2001
From: Alban Browaeys <prahal@yahoo.com>
Date: Fri, 4 Dec 2009 23:46:59 +0100
Subject: rt2x00 : avoid timestamp for monitor injected frame.

Do not include timestamp for a frame that has been injected
 through a monitor interface.

Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr>
Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 842c4e3c83ca..b8f09547787d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -387,10 +387,13 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 
 	/*
 	 * Beacons and probe responses require the tsf timestamp
-	 * to be inserted into the frame.
+	 * to be inserted into the frame, except for a frame that has been injected
+	 * through a monitor interface. This latter is needed for testing a
+	 * monitor interface.
 	 */
-	if (ieee80211_is_beacon(hdr->frame_control) ||
-	    ieee80211_is_probe_resp(hdr->frame_control))
+	if ((ieee80211_is_beacon(hdr->frame_control) ||
+	    ieee80211_is_probe_resp(hdr->frame_control)) &&
+	    (!(tx_info->flags & IEEE80211_TX_CTL_INJECTED)))
 		__set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags);
 
 	/*
-- 
cgit v1.2.3


From 1398d4580eff2656f3a808ec24744ce5a842db35 Mon Sep 17 00:00:00 2001
From: Alban Browaeys <prahal@yahoo.com>
Date: Fri, 4 Dec 2009 23:47:00 +0100
Subject: rt2x00 : trim the skb after having the l2pad removed.

Otherwise we end up truncating the skb before removing the l2pad
thus we might have the truncated part become garbage while getting
it back in remove_l2pad.
For the same issue: remove the skb_trim from the rt2800 fill_rxdone
(it is done after l2pad removal in rt2x00lib_rxdone).

Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c | 1 -
 drivers/net/wireless/rt2x00/rt2800usb.c | 1 -
 drivers/net/wireless/rt2x00/rt2x00dev.c | 6 +++---
 3 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index dfc886fcb44d..6fcb2bb840b2 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -927,7 +927,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	 * Remove TXWI descriptor from start of buffer.
 	 */
 	skb_pull(entry->skb, RXWI_DESC_SIZE);
-	skb_trim(entry->skb, rxdesc->size);
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index af85d18cdbe7..1db8667a6ff1 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -663,7 +663,6 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	 * Remove RXWI descriptor from start of buffer.
 	 */
 	skb_pull(entry->skb, skbdesc->desc_len);
-	skb_trim(entry->skb, rxdesc->size);
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 06c43ca39bf8..cc6bcc5a20c7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -385,9 +385,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	memset(&rxdesc, 0, sizeof(rxdesc));
 	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 
-	/* Trim buffer to correct size */
-	skb_trim(entry->skb, rxdesc.size);
-
 	/*
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
@@ -409,6 +406,9 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	else
 		rt2x00queue_align_payload(entry->skb, header_length);
 
+	/* Trim buffer to correct size */
+	skb_trim(entry->skb, rxdesc.size);
+
 	/*
 	 * Check if the frame was received using HT. In that case,
 	 * the rate is the MCS index and should be passed to mac80211
-- 
cgit v1.2.3


From 77e73d1849c860d22ebba8826ad162ccfda4c535 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Fri, 4 Dec 2009 23:47:01 +0100
Subject: rt2x00: Further L2 padding fixes.

Fix a couple of more bugs in the L2 padding code:
1. Compute the amount of L2 padding correctly (in 3 places).
2. Trim the skb correctly when the L2 padding has been applied.

Also introduce a central macro the compute the L2 padding size.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00.h      | 6 ++++++
 drivers/net/wireless/rt2x00/rt2x00queue.c | 8 +++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4d841c07c970..194dae01d0c3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -103,6 +103,12 @@
 #define GET_DURATION(__size, __rate)	(((__size) * 8 * 10) / (__rate))
 #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
 
+/*
+ * Determine the number of L2 padding bytes required between the header and
+ * the payload.
+ */
+#define L2PAD_SIZE(__hdrlen)	(-(__hdrlen) & 3)
+
 /*
  * Determine the alignment requirement,
  * to make sure the 802.11 payload is padded to a 4-byte boundrary
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index b8f09547787d..21d58769a1a7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -181,7 +181,7 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 	unsigned int frame_length = skb->len;
 	unsigned int header_align = ALIGN_SIZE(skb, 0);
 	unsigned int payload_align = ALIGN_SIZE(skb, header_length);
-	unsigned int l2pad = 4 - (payload_align - header_align);
+	unsigned int l2pad = L2PAD_SIZE(header_length);
 
 	if (header_align == payload_align) {
 		/*
@@ -216,6 +216,7 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 		memmove(skb->data + header_length + l2pad,
 			skb->data + header_length + l2pad + payload_align,
 			frame_length - header_length);
+		skb_trim(skb, frame_length + l2pad);
 		skbdesc->flags |= SKBDESC_L2_PADDED;
 	}
 }
@@ -223,7 +224,7 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int l2pad = 4 - (header_length & 3);
+	unsigned int l2pad = L2PAD_SIZE(header_length);
 
 	if (!l2pad || (skbdesc->flags & SKBDESC_L2_PADDED))
 		return;
@@ -346,7 +347,8 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * Header and alignment information.
 	 */
 	txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-	txdesc->l2pad = ALIGN_SIZE(entry->skb, txdesc->header_length);
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+		txdesc->l2pad = L2PAD_SIZE(txdesc->header_length);
 
 	/*
 	 * Check whether this frame is to be acked.
-- 
cgit v1.2.3


From 354e39dbb19f29ef28a9c2db9e55ff2a7435b35a Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Fri, 4 Dec 2009 23:47:02 +0100
Subject: rt2x00: Remove SKBDESC_L2_PADDED flag.

With the improved L2 padding code, this flag is no longer necessary, as the
rt2x00queue_remove_l2pad is capable of detecting by itself if L2 padding is
applied.
For received frames the RX descriptor flag is still being checked.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c   | 5 +----
 drivers/net/wireless/rt2x00/rt2800usb.c   | 4 +---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 6 +-----
 drivers/net/wireless/rt2x00/rt2x00queue.h | 5 +----
 4 files changed, 4 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 6fcb2bb840b2..458378c4e500 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -835,7 +835,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 				  struct rxdone_entry_desc *rxdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 	__le32 *rxd = entry_priv->desc;
 	__le32 *rxwi = (__le32 *)entry->skb->data;
@@ -883,10 +882,8 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) {
+	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
-		skbdesc->flags |= SKBDESC_L2_PADDED;
-	}
 
 	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
 		rxdesc->flags |= RX_FLAG_SHORT_GI;
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 1db8667a6ff1..13baec485eb6 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -625,10 +625,8 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD)) {
+	if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
-		skbdesc->flags |= SKBDESC_L2_PADDED;
-	}
 
 	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
 		rxdesc->flags |= RX_FLAG_SHORT_GI;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 21d58769a1a7..719f4aebcaf6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -177,7 +177,6 @@ void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length)
 
 void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	unsigned int frame_length = skb->len;
 	unsigned int header_align = ALIGN_SIZE(skb, 0);
 	unsigned int payload_align = ALIGN_SIZE(skb, header_length);
@@ -198,7 +197,6 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 		 */
 		skb_push(skb, header_align);
 		memmove(skb->data, skb->data + header_align, header_length);
-		skbdesc->flags |= SKBDESC_L2_PADDED;
 	} else {
 		/*
 		 *
@@ -217,16 +215,14 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 			skb->data + header_length + l2pad + payload_align,
 			frame_length - header_length);
 		skb_trim(skb, frame_length + l2pad);
-		skbdesc->flags |= SKBDESC_L2_PADDED;
 	}
 }
 
 void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	unsigned int l2pad = L2PAD_SIZE(header_length);
 
-	if (!l2pad || (skbdesc->flags & SKBDESC_L2_PADDED))
+	if (!l2pad)
 		return;
 
 	memmove(skb->data + l2pad, skb->data, header_length);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 70775e5ba1ac..c1e482bb37b3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -92,8 +92,6 @@ enum data_queue_qid {
  * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
  * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by
  *	mac80211 but was stripped for processing by the driver.
- * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment,
- *	the padded bytes are located between header and payload.
  * @SKBDESC_NOT_MAC80211: Frame didn't originate from mac80211,
  *	don't try to pass it back.
  */
@@ -101,8 +99,7 @@ enum skb_frame_desc_flags {
 	SKBDESC_DMA_MAPPED_RX = 1 << 0,
 	SKBDESC_DMA_MAPPED_TX = 1 << 1,
 	SKBDESC_IV_STRIPPED = 1 << 2,
-	SKBDESC_L2_PADDED = 1 << 3,
-	SKBDESC_NOT_MAC80211 = 1 << 4,
+	SKBDESC_NOT_MAC80211 = 1 << 3,
 };
 
 /**
-- 
cgit v1.2.3


From 2e331462fcb3d897921d8a0af4fca1b08c1b7269 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Fri, 4 Dec 2009 23:47:03 +0100
Subject: rt2x00: Reorganize L2 padding inserting function.

Simplify the rt2x00queue_insert_l2pad function by handling the alignment
operations one by one. Do not special case special circumstances.
Basically first perform header alignment, and then perform payload alignment
(if any payload does exist). This results in a properly aligned skb.

The end result is better readable code, with better results, as now L2 padding
is inserted only when a payload is actually present in the frame.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 60 ++++++++++++++-----------------
 1 file changed, 27 insertions(+), 33 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 719f4aebcaf6..7452fa850a0f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -177,45 +177,38 @@ void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length)
 
 void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
-	unsigned int frame_length = skb->len;
+	unsigned int payload_length = skb->len - header_length;
 	unsigned int header_align = ALIGN_SIZE(skb, 0);
 	unsigned int payload_align = ALIGN_SIZE(skb, header_length);
 	unsigned int l2pad = L2PAD_SIZE(header_length);
 
-	if (header_align == payload_align) {
-		/*
-		 * Both header and payload must be moved the same
-		 * amount of bytes to align them properly. This means
-		 * we don't use the L2 padding but just move the entire
-		 * frame.
-		 */
-		rt2x00queue_align_frame(skb);
-	} else if (!payload_align) {
-		/*
-		 * Simple L2 padding, only the header needs to be moved,
-		 * the payload is already properly aligned.
-		 */
-		skb_push(skb, header_align);
-		memmove(skb->data, skb->data + header_align, header_length);
-	} else {
-		/*
-		 *
-		 * Complicated L2 padding, both header and payload need
-		 * to be moved. By default we only move to the start
-		 * of the buffer, so our header alignment needs to be
-		 * increased if there is not enough room for the header
-		 * to be moved.
-		 */
-		if (payload_align > header_align)
-			header_align += 4;
+	/*
+	 * Adjust the header alignment if the payload needs to be moved more
+	 * than the header.
+	 */
+	if (payload_align > header_align)
+		header_align += 4;
+
+	/* There is nothing to do if no alignment is needed */
+	if (!header_align)
+		return;
 
-		skb_push(skb, header_align);
-		memmove(skb->data, skb->data + header_align, header_length);
+	/* Reserve the amount of space needed in front of the frame */
+	skb_push(skb, header_align);
+
+	/*
+	 * Move the header.
+	 */
+	memmove(skb->data, skb->data + header_align, header_length);
+
+	/* Move the payload, if present and if required */
+	if (payload_length && payload_align)
 		memmove(skb->data + header_length + l2pad,
 			skb->data + header_length + l2pad + payload_align,
-			frame_length - header_length);
-		skb_trim(skb, frame_length + l2pad);
-	}
+			payload_length);
+
+	/* Trim the skb to the correct size */
+	skb_trim(skb, header_length + l2pad + payload_length);
 }
 
 void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
@@ -343,7 +336,8 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * Header and alignment information.
 	 */
 	txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags) &&
+	    (entry->skb->len > txdesc->header_length))
 		txdesc->l2pad = L2PAD_SIZE(txdesc->header_length);
 
 	/*
-- 
cgit v1.2.3


From b734083349d1f1aab1edc810cef02e8046251b48 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Fri, 4 Dec 2009 23:47:04 +0100
Subject: rt2x00: Only remove L2 padding in received frames if there is
 payload.

L2 padding will only be present when there is actual payload present.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index cc6bcc5a20c7..d7711e4d4751 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -401,7 +401,9 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	    (rxdesc.flags & RX_FLAG_IV_STRIPPED))
 		rt2x00crypto_rx_insert_iv(entry->skb, header_length,
 					  &rxdesc);
-	else if (rxdesc.dev_flags & RXDONE_L2PAD)
+	else if (header_length &&
+		 (rxdesc.size > header_length) &&
+		 (rxdesc.dev_flags & RXDONE_L2PAD))
 		rt2x00queue_remove_l2pad(entry->skb, header_length);
 	else
 		rt2x00queue_align_payload(entry->skb, header_length);
-- 
cgit v1.2.3


From 9c8427d9deca1c0c2415c8da0e731e13fc89d111 Mon Sep 17 00:00:00 2001
From: Benoit PAPILLAULT <benoit.papillault@free.fr>
Date: Fri, 4 Dec 2009 23:47:05 +0100
Subject: rt2x00: Disable RX aggregation for rt2800usb

RX aggregation is a way to receive multiple 802.11 frames in one RX buffer.
However, we don't know yet how to handle this case in rt2800usb_fill_rxdone
and this has probably no impact on RX performance as well, so we disable it

Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 13baec485eb6..9c4412b42e5b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -295,9 +295,7 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
-	/* Don't use bulk in aggregation when working with USB 1.1 */
-	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
-			   (rt2x00dev->rx->usb_maxpacket == 512));
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
 	/*
 	 * Total room for RX frames in kilobytes, PBF might still exceed
-- 
cgit v1.2.3


From 5de42f9eeafa7d54ffb833e0526d4828e194fddb Mon Sep 17 00:00:00 2001
From: Benoit Papillault <benoit.papillault@free.fr>
Date: Fri, 4 Dec 2009 23:47:06 +0100
Subject: rt2x00: Fix rt2800usb RX frame format and as such L2PAD

According to Ralink source code, the RX frame format is RXINFO + RXWI +
802.11 frame + RXD, including various padding. Before this patch, we
were using RXD + RXWI + 802.11 frame, so RXD was not correct.

Doing this, we fix the L2PAD bit which is now correctly set on received
frames.

Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>
Acked-by: Ivo van Doorn <ivdoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 38 ++++++++++----
 drivers/net/wireless/rt2x00/rt2800usb.h | 90 +++++++++++++++++++++++++--------
 2 files changed, 97 insertions(+), 31 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 9c4412b42e5b..40295b454ff6 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -571,41 +571,57 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	__le32 *rxd = (__le32 *)entry->skb->data;
+	__le32 *rxi = (__le32 *)entry->skb->data;
 	__le32 *rxwi;
-	u32 rxd0;
+	__le32 *rxd;
+	u32 rxi0;
 	u32 rxwi0;
 	u32 rxwi1;
 	u32 rxwi2;
 	u32 rxwi3;
+	u32 rxd0;
+	int rx_pkt_len;
+
+	/*
+	 * RX frame format is :
+	 * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
+	 *          |<------------ rx_pkt_len -------------->|
+	 */
+	rt2x00_desc_read(rxi, 0, &rxi0);
+	rx_pkt_len = rt2x00_get_field32(rxi0, RXINFO_W0_USB_DMA_RX_PKT_LEN);
+
+	rxwi = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE);
+
+	/*
+	 * FIXME : we need to check for rx_pkt_len validity
+	 */
+	rxd = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE + rx_pkt_len);
 
 	/*
 	 * Copy descriptor to the skbdesc->desc buffer, making it safe from
 	 * moving of frame data in rt2x00usb.
 	 */
-	memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
-	rxd = (__le32 *)skbdesc->desc;
-	rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)];
+	memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
 
 	/*
 	 * It is now safe to read the descriptor on all architectures.
 	 */
-	rt2x00_desc_read(rxd, 0, &rxd0);
 	rt2x00_desc_read(rxwi, 0, &rxwi0);
 	rt2x00_desc_read(rxwi, 1, &rxwi1);
 	rt2x00_desc_read(rxwi, 2, &rxwi2);
 	rt2x00_desc_read(rxwi, 3, &rxwi3);
+	rt2x00_desc_read(rxd, 0, &rxd0);
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_CRC_ERROR))
+	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
 		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
 		rxdesc->cipher_status =
-		    rt2x00_get_field32(rxd0, RXINFO_W0_CIPHER_ERROR);
+		    rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
 	}
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_DECRYPTED)) {
+	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
 		 * decryption. Unfortunately the descriptor doesn't contain
@@ -620,10 +636,10 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 	}
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS))
+	if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD))
+	if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
 
 	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 1e4340a182ef..d1d8ae94b4d4 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -79,6 +79,8 @@
  */
 #define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
 #define RXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
 
 /*
  * TX Info structure
@@ -100,6 +102,54 @@
 #define TXINFO_W0_USB_DMA_NEXT_VALID	FIELD32(0x40000000)
 #define TXINFO_W0_USB_DMA_TX_BURST	FIELD32(0x80000000)
 
+/*
+ * RX Info structure
+ */
+
+/*
+ * Word 0
+ */
+
+#define RXINFO_W0_USB_DMA_RX_PKT_LEN	FIELD32(0x0000ffff)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
 /*
  * RX descriptor format for RX Ring.
  */
@@ -115,25 +165,25 @@
  * AMSDU: rx with 802.3 header, not 802.11 header.
  */
 
-#define RXINFO_W0_BA			FIELD32(0x00000001)
-#define RXINFO_W0_DATA			FIELD32(0x00000002)
-#define RXINFO_W0_NULLDATA		FIELD32(0x00000004)
-#define RXINFO_W0_FRAG			FIELD32(0x00000008)
-#define RXINFO_W0_UNICAST_TO_ME		FIELD32(0x00000010)
-#define RXINFO_W0_MULTICAST		FIELD32(0x00000020)
-#define RXINFO_W0_BROADCAST		FIELD32(0x00000040)
-#define RXINFO_W0_MY_BSS		FIELD32(0x00000080)
-#define RXINFO_W0_CRC_ERROR		FIELD32(0x00000100)
-#define RXINFO_W0_CIPHER_ERROR		FIELD32(0x00000600)
-#define RXINFO_W0_AMSDU			FIELD32(0x00000800)
-#define RXINFO_W0_HTC			FIELD32(0x00001000)
-#define RXINFO_W0_RSSI			FIELD32(0x00002000)
-#define RXINFO_W0_L2PAD			FIELD32(0x00004000)
-#define RXINFO_W0_AMPDU			FIELD32(0x00008000)
-#define RXINFO_W0_DECRYPTED		FIELD32(0x00010000)
-#define RXINFO_W0_PLCP_RSSI		FIELD32(0x00020000)
-#define RXINFO_W0_CIPHER_ALG		FIELD32(0x00040000)
-#define RXINFO_W0_LAST_AMSDU		FIELD32(0x00080000)
-#define RXINFO_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
+#define RXD_W0_BA			FIELD32(0x00000001)
+#define RXD_W0_DATA			FIELD32(0x00000002)
+#define RXD_W0_NULLDATA			FIELD32(0x00000004)
+#define RXD_W0_FRAG			FIELD32(0x00000008)
+#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXD_W0_MULTICAST		FIELD32(0x00000020)
+#define RXD_W0_BROADCAST		FIELD32(0x00000040)
+#define RXD_W0_MY_BSS			FIELD32(0x00000080)
+#define RXD_W0_CRC_ERROR		FIELD32(0x00000100)
+#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXD_W0_AMSDU			FIELD32(0x00000800)
+#define RXD_W0_HTC			FIELD32(0x00001000)
+#define RXD_W0_RSSI			FIELD32(0x00002000)
+#define RXD_W0_L2PAD			FIELD32(0x00004000)
+#define RXD_W0_AMPDU			FIELD32(0x00008000)
+#define RXD_W0_DECRYPTED		FIELD32(0x00010000)
+#define RXD_W0_PLCP_RSSI		FIELD32(0x00020000)
+#define RXD_W0_CIPHER_ALG		FIELD32(0x00040000)
+#define RXD_W0_LAST_AMSDU		FIELD32(0x00080000)
+#define RXD_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
 
 #endif /* RT2800USB_H */
-- 
cgit v1.2.3


From e54be4e7356c0612b48407d3b0647a29cb82e254 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Fri, 4 Dec 2009 23:47:07 +0100
Subject: rt2x00: Fix trimming of L2 padded frames.

Ensure that frames without payload are properly trimmed in
rt2x00queue_insert_l2pad.

This should fix the bug reported by Benoit Papillault in:
http://marc.info/?l=linux-wireless&m=125974773006734&w=2

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7452fa850a0f..3d8fb684b4eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -180,7 +180,7 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 	unsigned int payload_length = skb->len - header_length;
 	unsigned int header_align = ALIGN_SIZE(skb, 0);
 	unsigned int payload_align = ALIGN_SIZE(skb, header_length);
-	unsigned int l2pad = L2PAD_SIZE(header_length);
+	unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
 
 	/*
 	 * Adjust the header alignment if the payload needs to be moved more
-- 
cgit v1.2.3


From 18974b5b0b5e758d416c550553b143e5c8038281 Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Tue, 1 Dec 2009 10:18:38 +0800
Subject: iwmc3200wifi: rx aggregation support

When the device receives an A-MSDU frame (indicated by flag
IWM_RX_TICKET_AMSDU_MSK), use ieee80211_amsdu_to_8023s to convert
it to a list of 802.3 frames and handled them to upper layer.

Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/rx.c | 46 ++++++++++++++++++++++++++++++----
 1 file changed, 41 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 72c27a3e5528..6bd253ac533f 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1534,6 +1534,33 @@ static void classify8023(struct sk_buff *skb)
 	}
 }
 
+static void iwm_rx_process_amsdu(struct iwm_priv *iwm, struct sk_buff *skb)
+{
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+	struct net_device *ndev = iwm_to_ndev(iwm);
+	struct sk_buff_head list;
+	struct sk_buff *frame;
+
+	IWM_HEXDUMP(iwm, DBG, RX, "A-MSDU: ", skb->data, skb->len);
+
+	__skb_queue_head_init(&list);
+	ieee80211_amsdu_to_8023s(skb, &list, ndev->dev_addr, wdev->iftype, 0);
+
+	while ((frame = __skb_dequeue(&list))) {
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += frame->len;
+
+		frame->protocol = eth_type_trans(frame, ndev);
+		frame->ip_summed = CHECKSUM_NONE;
+		memset(frame->cb, 0, sizeof(frame->cb));
+
+		if (netif_rx_ni(frame) == NET_RX_DROP) {
+			IWM_ERR(iwm, "Packet dropped\n");
+			ndev->stats.rx_dropped++;
+		}
+	}
+}
+
 static void iwm_rx_process_packet(struct iwm_priv *iwm,
 				  struct iwm_rx_packet *packet,
 				  struct iwm_rx_ticket_node *ticket_node)
@@ -1548,25 +1575,34 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm,
 	switch (le16_to_cpu(ticket_node->ticket->action)) {
 	case IWM_RX_TICKET_RELEASE:
 		IWM_DBG_RX(iwm, DBG, "RELEASE packet\n");
-		classify8023(skb);
+
 		iwm_rx_adjust_packet(iwm, packet, ticket_node);
+		skb->dev = iwm_to_ndev(iwm);
+		classify8023(skb);
+
+		if (le16_to_cpu(ticket_node->ticket->flags) &
+		    IWM_RX_TICKET_AMSDU_MSK) {
+			iwm_rx_process_amsdu(iwm, skb);
+			break;
+		}
+
 		ret = ieee80211_data_to_8023(skb, ndev->dev_addr, wdev->iftype);
 		if (ret < 0) {
 			IWM_DBG_RX(iwm, DBG, "Couldn't convert 802.11 header - "
 				   "%d\n", ret);
+			kfree_skb(packet->skb);
 			break;
 		}
 
 		IWM_HEXDUMP(iwm, DBG, RX, "802.3: ", skb->data, skb->len);
 
-		skb->dev = iwm_to_ndev(iwm);
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += skb->len;
+
 		skb->protocol = eth_type_trans(skb, ndev);
 		skb->ip_summed = CHECKSUM_NONE;
 		memset(skb->cb, 0, sizeof(skb->cb));
 
-		ndev->stats.rx_packets++;
-		ndev->stats.rx_bytes += skb->len;
-
 		if (netif_rx_ni(skb) == NET_RX_DROP) {
 			IWM_ERR(iwm, "Packet dropped\n");
 			ndev->stats.rx_dropped++;
-- 
cgit v1.2.3


From 0f78231bffb868a30e8533aace142213266bb811 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 1 Dec 2009 13:37:02 +0100
Subject: mac80211: enable spatial multiplexing powersave

Enable spatial multiplexing in mac80211 by telling the
driver what to do and, where necessary, sending action
frames to the AP to update the requested SMPS mode.

Also includes a trivial implementation for hwsim that
just logs the requested mode.

For now, the userspace interface is in debugfs only,
and let you toggle the requested mode at any time.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c |  24 ++++++--
 include/linux/ieee80211.h             |  25 +++++++-
 include/net/mac80211.h                |  59 ++++++++++++++++++
 net/mac80211/cfg.c                    |  49 +++++++++++++++
 net/mac80211/debugfs_netdev.c         | 111 +++++++++++++++++++++++++++++++++-
 net/mac80211/driver-trace.h           |   2 +
 net/mac80211/ht.c                     |  47 ++++++++++++++
 net/mac80211/ieee80211_i.h            |  14 +++++
 net/mac80211/main.c                   |  24 ++++++++
 net/mac80211/mlme.c                   |  63 +++++++++++++++++--
 net/mac80211/status.c                 |  38 ++++++++++++
 net/mac80211/util.c                   |  74 +++++++++++++++++++++++
 12 files changed, 518 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 88e41176e7fd..92c669ebb358 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -618,12 +618,26 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct mac80211_hwsim_data *data = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
-
-	printk(KERN_DEBUG "%s:%s (freq=%d idle=%d ps=%d)\n",
+	static const char *chantypes[4] = {
+		[NL80211_CHAN_NO_HT] = "noht",
+		[NL80211_CHAN_HT20] = "ht20",
+		[NL80211_CHAN_HT40MINUS] = "ht40-",
+		[NL80211_CHAN_HT40PLUS] = "ht40+",
+	};
+	static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
+		[IEEE80211_SMPS_AUTOMATIC] = "auto",
+		[IEEE80211_SMPS_OFF] = "off",
+		[IEEE80211_SMPS_STATIC] = "static",
+		[IEEE80211_SMPS_DYNAMIC] = "dynamic",
+	};
+
+	printk(KERN_DEBUG "%s:%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
 	       wiphy_name(hw->wiphy), __func__,
 	       conf->channel->center_freq,
+	       chantypes[conf->channel_type],
 	       !!(conf->flags & IEEE80211_CONF_IDLE),
-	       !!(conf->flags & IEEE80211_CONF_PS));
+	       !!(conf->flags & IEEE80211_CONF_PS),
+	       smps_modes[conf->smps_mode]);
 
 	data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
 
@@ -1082,7 +1096,9 @@ static int __init init_mac80211_hwsim(void)
 			BIT(NL80211_IFTYPE_MESH_POINT);
 
 		hw->flags = IEEE80211_HW_MFP_CAPABLE |
-			    IEEE80211_HW_SIGNAL_DBM;
+			    IEEE80211_HW_SIGNAL_DBM |
+			    IEEE80211_HW_SUPPORTS_STATIC_SMPS |
+			    IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
 
 		/* ask mac80211 to reserve space for magic */
 		hw->vif_data_size = sizeof(struct hwsim_vif_priv);
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d9724a28c0c2..e8d43d0ff2c3 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -707,6 +707,10 @@ struct ieee80211_mgmt {
 					u8 action;
 					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
 				} __attribute__ ((packed)) sa_query;
+				struct {
+					u8 action;
+					u8 smps_control;
+				} __attribute__ ((packed)) ht_smps;
 			} u;
 		} __attribute__ ((packed)) action;
 	} u;
@@ -824,6 +828,7 @@ struct ieee80211_ht_cap {
 #define IEEE80211_HT_CAP_LDPC_CODING		0x0001
 #define IEEE80211_HT_CAP_SUP_WIDTH_20_40	0x0002
 #define IEEE80211_HT_CAP_SM_PS			0x000C
+#define		IEEE80211_HT_CAP_SM_PS_SHIFT	2
 #define IEEE80211_HT_CAP_GRN_FLD		0x0010
 #define IEEE80211_HT_CAP_SGI_20			0x0020
 #define IEEE80211_HT_CAP_SGI_40			0x0040
@@ -839,6 +844,7 @@ struct ieee80211_ht_cap {
 /* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
 #define IEEE80211_HT_AMPDU_PARM_FACTOR		0x03
 #define IEEE80211_HT_AMPDU_PARM_DENSITY		0x1C
+#define		IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT	2
 
 /*
  * Maximum length of AMPDU that the STA can receive.
@@ -922,12 +928,17 @@ struct ieee80211_ht_info {
 #define IEEE80211_MAX_AMPDU_BUF 0x40
 
 
-/* Spatial Multiplexing Power Save Modes */
+/* Spatial Multiplexing Power Save Modes (for capability) */
 #define WLAN_HT_CAP_SM_PS_STATIC	0
 #define WLAN_HT_CAP_SM_PS_DYNAMIC	1
 #define WLAN_HT_CAP_SM_PS_INVALID	2
 #define WLAN_HT_CAP_SM_PS_DISABLED	3
 
+/* for SM power control field lower two bits */
+#define WLAN_HT_SMPS_CONTROL_DISABLED	0
+#define WLAN_HT_SMPS_CONTROL_STATIC	1
+#define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -1150,6 +1161,18 @@ enum ieee80211_spectrum_mgmt_actioncode {
 	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
 };
 
+/* HT action codes */
+enum ieee80211_ht_actioncode {
+	WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0,
+	WLAN_HT_ACTION_SMPS = 1,
+	WLAN_HT_ACTION_PSMP = 2,
+	WLAN_HT_ACTION_PCO_PHASE = 3,
+	WLAN_HT_ACTION_CSI = 4,
+	WLAN_HT_ACTION_NONCOMPRESSED_BF = 5,
+	WLAN_HT_ACTION_COMPRESSED_BF = 6,
+	WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
+};
+
 /* Security key length */
 enum ieee80211_key_len {
 	WLAN_KEY_LEN_WEP40 = 5,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e94cc526b0f6..e6b6bf81d5b9 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -597,8 +597,10 @@ enum ieee80211_conf_flags {
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
  * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
+ * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
  */
 enum ieee80211_conf_changed {
+	IEEE80211_CONF_CHANGE_SMPS		= BIT(1),
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
 	IEEE80211_CONF_CHANGE_MONITOR		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
@@ -608,6 +610,21 @@ enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_IDLE		= BIT(8),
 };
 
+/**
+ * enum ieee80211_smps_mode - spatial multiplexing power save mode
+ *
+ * @
+ */
+enum ieee80211_smps_mode {
+	IEEE80211_SMPS_AUTOMATIC,
+	IEEE80211_SMPS_OFF,
+	IEEE80211_SMPS_STATIC,
+	IEEE80211_SMPS_DYNAMIC,
+
+	/* keep last */
+	IEEE80211_SMPS_NUM_MODES,
+};
+
 /**
  * struct ieee80211_conf - configuration of the device
  *
@@ -636,6 +653,10 @@ enum ieee80211_conf_changed {
  * @short_frame_max_tx_count: Maximum number of transmissions for a "short"
  *    frame, called "dot11ShortRetryLimit" in 802.11, but actually means the
  *    number of transmissions not the number of retries
+ *
+ * @smps_mode: spatial multiplexing powersave mode; note that
+ *	%IEEE80211_SMPS_STATIC is used when the device is not
+ *	configured for an HT channel
  */
 struct ieee80211_conf {
 	u32 flags;
@@ -648,6 +669,7 @@ struct ieee80211_conf {
 
 	struct ieee80211_channel *channel;
 	enum nl80211_channel_type channel_type;
+	enum ieee80211_smps_mode smps_mode;
 };
 
 /**
@@ -930,6 +952,16 @@ enum ieee80211_tkip_key_type {
  * @IEEE80211_HW_BEACON_FILTER:
  *	Hardware supports dropping of irrelevant beacon frames to
  *	avoid waking up cpu.
+ *
+ * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
+ *	Hardware supports static spatial multiplexing powersave,
+ *	ie. can turn off all but one chain even on HT connections
+ *	that should be using more chains.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
+ *	Hardware supports dynamic spatial multiplexing powersave,
+ *	ie. can turn off all but one chain and then wake the rest
+ *	up as required after, for example, rts/cts handshake.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -947,6 +979,8 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
 	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 	IEEE80211_HW_BEACON_FILTER			= 1<<14,
+	IEEE80211_HW_SUPPORTS_STATIC_SMPS		= 1<<15,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS		= 1<<16,
 };
 
 /**
@@ -1214,6 +1248,31 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * signal strength threshold checking.
  */
 
+/**
+ * DOC: Spatial multiplexing power save
+ *
+ * SMPS (Spatial multiplexing power save) is a mechanism to conserve
+ * power in an 802.11n implementation. For details on the mechanism
+ * and rationale, please refer to 802.11 (as amended by 802.11n-2009)
+ * "11.2.3 SM power save".
+ *
+ * The mac80211 implementation is capable of sending action frames
+ * to update the AP about the station's SMPS mode, and will instruct
+ * the driver to enter the specific mode. It will also announce the
+ * requested SMPS mode during the association handshake. Hardware
+ * support for this feature is required, and can be indicated by
+ * hardware flags.
+ *
+ * The default mode will be "automatic", which nl80211/cfg80211
+ * defines to be dynamic SMPS in (regular) powersave, and SMPS
+ * turned off otherwise.
+ *
+ * To support this feature, the driver must set the appropriate
+ * hardware support flags, and handle the SMPS flag to the config()
+ * operation. It will then with this mechanism be instructed to
+ * enter the requested SMPS mode while associated to an HT AP.
+ */
+
 /**
  * DOC: Frame filtering
  *
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fcfa1bf776a7..8c35418d1c96 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1318,6 +1318,50 @@ static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len)
 }
 #endif
 
+int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
+			     enum ieee80211_smps_mode smps_mode)
+{
+	const u8 *ap;
+	enum ieee80211_smps_mode old_req;
+	int err;
+
+	old_req = sdata->u.mgd.req_smps;
+	sdata->u.mgd.req_smps = smps_mode;
+
+	if (old_req == smps_mode &&
+	    smps_mode != IEEE80211_SMPS_AUTOMATIC)
+		return 0;
+
+	/*
+	 * If not associated, or current association is not an HT
+	 * association, there's no need to send an action frame.
+	 */
+	if (!sdata->u.mgd.associated ||
+	    sdata->local->oper_channel_type == NL80211_CHAN_NO_HT) {
+		mutex_lock(&sdata->local->iflist_mtx);
+		ieee80211_recalc_smps(sdata->local, sdata);
+		mutex_unlock(&sdata->local->iflist_mtx);
+		return 0;
+	}
+
+	ap = sdata->u.mgd.associated->cbss.bssid;
+
+	if (smps_mode == IEEE80211_SMPS_AUTOMATIC) {
+		if (sdata->u.mgd.powersave)
+			smps_mode = IEEE80211_SMPS_DYNAMIC;
+		else
+			smps_mode = IEEE80211_SMPS_OFF;
+	}
+
+	/* send SM PS frame to AP */
+	err = ieee80211_send_smps_action(sdata, smps_mode,
+					 ap, ap);
+	if (err)
+		sdata->u.mgd.req_smps = old_req;
+
+	return err;
+}
+
 static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
 				    bool enabled, int timeout)
 {
@@ -1335,6 +1379,11 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
 	sdata->u.mgd.powersave = enabled;
 	conf->dynamic_ps_timeout = timeout;
 
+	/* no change, but if automatic follow powersave */
+	mutex_lock(&sdata->u.mgd.mtx);
+	__ieee80211_request_smps(sdata, sdata->u.mgd.req_smps);
+	mutex_unlock(&sdata->u.mgd.mtx);
+
 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 5d9c797635a9..355983503885 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -41,6 +41,30 @@ static ssize_t ieee80211_if_read(
 	return ret;
 }
 
+static ssize_t ieee80211_if_write(
+	struct ieee80211_sub_if_data *sdata,
+	const char __user *userbuf,
+	size_t count, loff_t *ppos,
+	ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int))
+{
+	u8 *buf;
+	ssize_t ret = -ENODEV;
+
+	buf = kzalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (copy_from_user(buf, userbuf, count))
+		return -EFAULT;
+
+	rtnl_lock();
+	if (sdata->dev->reg_state == NETREG_REGISTERED)
+		ret = (*write)(sdata, buf, count);
+	rtnl_unlock();
+
+	return ret;
+}
+
 #define IEEE80211_IF_FMT(name, field, format_string)			\
 static ssize_t ieee80211_if_fmt_##name(					\
 	const struct ieee80211_sub_if_data *sdata, char *buf,		\
@@ -71,7 +95,7 @@ static ssize_t ieee80211_if_fmt_##name(					\
 	return scnprintf(buf, buflen, "%pM\n", sdata->field);		\
 }
 
-#define __IEEE80211_IF_FILE(name)					\
+#define __IEEE80211_IF_FILE(name, _write)				\
 static ssize_t ieee80211_if_read_##name(struct file *file,		\
 					char __user *userbuf,		\
 					size_t count, loff_t *ppos)	\
@@ -82,12 +106,24 @@ static ssize_t ieee80211_if_read_##name(struct file *file,		\
 }									\
 static const struct file_operations name##_ops = {			\
 	.read = ieee80211_if_read_##name,				\
+	.write = (_write),						\
 	.open = mac80211_open_file_generic,				\
 }
 
+#define __IEEE80211_IF_FILE_W(name)					\
+static ssize_t ieee80211_if_write_##name(struct file *file,		\
+					 const char __user *userbuf,	\
+					 size_t count, loff_t *ppos)	\
+{									\
+	return ieee80211_if_write(file->private_data, userbuf, count,	\
+				  ppos, ieee80211_if_parse_##name);	\
+}									\
+__IEEE80211_IF_FILE(name, ieee80211_if_write_##name)
+
+
 #define IEEE80211_IF_FILE(name, field, format)				\
 		IEEE80211_IF_FMT_##format(name, field)			\
-		__IEEE80211_IF_FILE(name)
+		__IEEE80211_IF_FILE(name, NULL)
 
 /* common attributes */
 IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
@@ -99,6 +135,70 @@ IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
 IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
 IEEE80211_IF_FILE(capab, u.mgd.capab, HEX);
 
+static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
+			      enum ieee80211_smps_mode smps_mode)
+{
+	struct ieee80211_local *local = sdata->local;
+	int err;
+
+	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) &&
+	    smps_mode == IEEE80211_SMPS_STATIC)
+		return -EINVAL;
+
+	/* auto should be dynamic if in PS mode */
+	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) &&
+	    (smps_mode == IEEE80211_SMPS_DYNAMIC ||
+	     smps_mode == IEEE80211_SMPS_AUTOMATIC))
+		return -EINVAL;
+
+	/* supported only on managed interfaces for now */
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&local->iflist_mtx);
+	err = __ieee80211_request_smps(sdata, smps_mode);
+	mutex_unlock(&local->iflist_mtx);
+
+	return err;
+}
+
+static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
+	[IEEE80211_SMPS_AUTOMATIC] = "auto",
+	[IEEE80211_SMPS_OFF] = "off",
+	[IEEE80211_SMPS_STATIC] = "static",
+	[IEEE80211_SMPS_DYNAMIC] = "dynamic",
+};
+
+static ssize_t ieee80211_if_fmt_smps(const struct ieee80211_sub_if_data *sdata,
+				     char *buf, int buflen)
+{
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return -EOPNOTSUPP;
+
+	return snprintf(buf, buflen, "request: %s\nused: %s\n",
+			smps_modes[sdata->u.mgd.req_smps],
+			smps_modes[sdata->u.mgd.ap_smps]);
+}
+
+static ssize_t ieee80211_if_parse_smps(struct ieee80211_sub_if_data *sdata,
+				       const char *buf, int buflen)
+{
+	enum ieee80211_smps_mode mode;
+
+	for (mode = 0; mode < IEEE80211_SMPS_NUM_MODES; mode++) {
+		if (strncmp(buf, smps_modes[mode], buflen) == 0) {
+			int err = ieee80211_set_smps(sdata, mode);
+			if (!err)
+				return buflen;
+			return err;
+		}
+	}
+
+	return -EINVAL;
+}
+
+__IEEE80211_IF_FILE_W(smps);
+
 /* AP attributes */
 IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC);
 IEEE80211_IF_FILE(dtim_count, u.ap.dtim_count, DEC);
@@ -109,7 +209,7 @@ static ssize_t ieee80211_if_fmt_num_buffered_multicast(
 	return scnprintf(buf, buflen, "%u\n",
 			 skb_queue_len(&sdata->u.ap.ps_bc_buf));
 }
-__IEEE80211_IF_FILE(num_buffered_multicast);
+__IEEE80211_IF_FILE(num_buffered_multicast, NULL);
 
 /* WDS attributes */
 IEEE80211_IF_FILE(peer, u.wds.remote_addr, MAC);
@@ -158,6 +258,10 @@ IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
 	debugfs_create_file(#name, 0400, sdata->debugfs.dir, \
 			    sdata, &name##_ops);
 
+#define DEBUGFS_ADD_MODE(name, mode) \
+	debugfs_create_file(#name, mode, sdata->debugfs.dir, \
+			    sdata, &name##_ops);
+
 static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, sta);
@@ -167,6 +271,7 @@ static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 	DEBUGFS_ADD(bssid, sta);
 	DEBUGFS_ADD(aid, sta);
 	DEBUGFS_ADD(capab, sta);
+	DEBUGFS_ADD_MODE(smps, 0600);
 }
 
 static void add_ap_files(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index ee2d19a25ce1..7a849b920165 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -140,6 +140,7 @@ TRACE_EVENT(drv_config,
 		__field(u8, short_frame_max_tx_count)
 		__field(int, center_freq)
 		__field(int, channel_type)
+		__field(int, smps)
 	),
 
 	TP_fast_assign(
@@ -155,6 +156,7 @@ TRACE_EVENT(drv_config,
 		__entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count;
 		__entry->center_freq = local->hw.conf.channel->center_freq;
 		__entry->channel_type = local->hw.conf.channel_type;
+		__entry->smps = local->hw.conf.smps_mode;
 	),
 
 	TP_printk(
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 45ebd062a2fb..63b8f86b7f16 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -166,3 +166,50 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
 		spin_unlock_bh(&sta->lock);
 	}
 }
+
+int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
+			       enum ieee80211_smps_mode smps, const u8 *da,
+			       const u8 *bssid)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct ieee80211_mgmt *action_frame;
+
+	/* 27 = header + category + action + smps mode */
+	skb = dev_alloc_skb(27 + local->hw.extra_tx_headroom);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+	action_frame = (void *)skb_put(skb, 27);
+	memcpy(action_frame->da, da, ETH_ALEN);
+	memcpy(action_frame->sa, sdata->dev->dev_addr, ETH_ALEN);
+	memcpy(action_frame->bssid, bssid, ETH_ALEN);
+	action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+						  IEEE80211_STYPE_ACTION);
+	action_frame->u.action.category = WLAN_CATEGORY_HT;
+	action_frame->u.action.u.ht_smps.action = WLAN_HT_ACTION_SMPS;
+	switch (smps) {
+	case IEEE80211_SMPS_AUTOMATIC:
+	case IEEE80211_SMPS_NUM_MODES:
+		WARN_ON(1);
+	case IEEE80211_SMPS_OFF:
+		action_frame->u.action.u.ht_smps.smps_control =
+				WLAN_HT_SMPS_CONTROL_DISABLED;
+		break;
+	case IEEE80211_SMPS_STATIC:
+		action_frame->u.action.u.ht_smps.smps_control =
+				WLAN_HT_SMPS_CONTROL_STATIC;
+		break;
+	case IEEE80211_SMPS_DYNAMIC:
+		action_frame->u.action.u.ht_smps.smps_control =
+				WLAN_HT_SMPS_CONTROL_DYNAMIC;
+		break;
+	}
+
+	/* we'll do more on status of this frame */
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	ieee80211_tx_skb(sdata, skb);
+
+	return 0;
+}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 178e329f9257..e63aecbddfbe 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -297,6 +297,8 @@ struct ieee80211_if_managed {
 
 	unsigned long timers_running; /* used for quiesce/restart */
 	bool powersave; /* powersave requested for this iface */
+	enum ieee80211_smps_mode req_smps, /* requested smps mode */
+				 ap_smps; /* smps mode AP thinks we're in */
 
 	unsigned long request;
 
@@ -587,6 +589,9 @@ struct ieee80211_local {
 	/* used for uploading changed mc list */
 	struct work_struct reconfig_filter;
 
+	/* used to reconfigure hardware SM PS */
+	struct work_struct recalc_smps;
+
 	/* aggregated multicast list */
 	struct dev_addr_list *mc_list;
 	int mc_count;
@@ -760,6 +765,8 @@ struct ieee80211_local {
 	int user_power_level; /* in dBm */
 	int power_constr_level; /* in dBm */
 
+	enum ieee80211_smps_mode smps_mode;
+
 	struct work_struct restart_work;
 
 #ifdef CONFIG_MAC80211_DEBUGFS
@@ -978,6 +985,9 @@ void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u1
 void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
 			  const u8 *da, u16 tid,
 			  u16 initiator, u16 reason_code);
+int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
+			       enum ieee80211_smps_mode smps, const u8 *da,
+			       const u8 *bssid);
 
 void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da,
 				u16 tid, u16 initiator, u16 reason);
@@ -1088,6 +1098,10 @@ void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
 u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
 			    struct ieee802_11_elems *elems,
 			    enum ieee80211_band band);
+int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
+			     enum ieee80211_smps_mode smps_mode);
+void ieee80211_recalc_smps(struct ieee80211_local *local,
+			   struct ieee80211_sub_if_data *forsdata);
 
 #ifdef CONFIG_MAC80211_NOINLINE
 #define debug_noinline noinline
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 98320a94c270..e1293e8ed83a 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -113,6 +113,18 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
 	}
 
+	if (!conf_is_ht(&local->hw.conf)) {
+		/*
+		 * mac80211.h documents that this is only valid
+		 * when the channel is set to an HT type, and
+		 * that otherwise STATIC is used.
+		 */
+		local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
+	} else if (local->hw.conf.smps_mode != local->smps_mode) {
+		local->hw.conf.smps_mode = local->smps_mode;
+		changed |= IEEE80211_CONF_CHANGE_SMPS;
+	}
+
 	if (scan_chan)
 		power = chan->max_power;
 	else
@@ -297,6 +309,16 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw)
 }
 EXPORT_SYMBOL(ieee80211_restart_hw);
 
+static void ieee80211_recalc_smps_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local, recalc_smps);
+
+	mutex_lock(&local->iflist_mtx);
+	ieee80211_recalc_smps(local, NULL);
+	mutex_unlock(&local->iflist_mtx);
+}
+
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 					const struct ieee80211_ops *ops)
 {
@@ -370,6 +392,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	INIT_WORK(&local->restart_work, ieee80211_restart_work);
 
 	INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
+	INIT_WORK(&local->recalc_smps, ieee80211_recalc_smps_work);
+	local->smps_mode = IEEE80211_SMPS_OFF;
 
 	INIT_WORK(&local->dynamic_ps_enable_work,
 		  ieee80211_dynamic_ps_enable_work);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index cd5dcc3d8c2b..0a762a9ba4df 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -398,6 +398,8 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 		__le16 tmp;
 		u32 flags = local->hw.conf.channel->flags;
 
+		/* determine capability flags */
+
 		switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
 		case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 			if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
@@ -413,17 +415,64 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 			break;
 		}
 
-		tmp = cpu_to_le16(cap);
-		pos = skb_put(skb, sizeof(struct ieee80211_ht_cap)+2);
+		/* set SM PS mode properly */
+		cap &= ~IEEE80211_HT_CAP_SM_PS;
+		/* new association always uses requested smps mode */
+		if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
+			if (ifmgd->powersave)
+				ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC;
+			else
+				ifmgd->ap_smps = IEEE80211_SMPS_OFF;
+		} else
+			ifmgd->ap_smps = ifmgd->req_smps;
+
+		switch (ifmgd->ap_smps) {
+		case IEEE80211_SMPS_AUTOMATIC:
+		case IEEE80211_SMPS_NUM_MODES:
+			WARN_ON(1);
+		case IEEE80211_SMPS_OFF:
+			cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+				IEEE80211_HT_CAP_SM_PS_SHIFT;
+			break;
+		case IEEE80211_SMPS_STATIC:
+			cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+				IEEE80211_HT_CAP_SM_PS_SHIFT;
+			break;
+		case IEEE80211_SMPS_DYNAMIC:
+			cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+				IEEE80211_HT_CAP_SM_PS_SHIFT;
+			break;
+		}
+
+		/* reserve and fill IE */
+
+		pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
 		*pos++ = WLAN_EID_HT_CAPABILITY;
 		*pos++ = sizeof(struct ieee80211_ht_cap);
 		memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+
+		/* capability flags */
+		tmp = cpu_to_le16(cap);
 		memcpy(pos, &tmp, sizeof(u16));
 		pos += sizeof(u16);
-		/* TODO: needs a define here for << 2 */
+
+		/* AMPDU parameters */
 		*pos++ = sband->ht_cap.ampdu_factor |
-			 (sband->ht_cap.ampdu_density << 2);
+			 (sband->ht_cap.ampdu_density <<
+				IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
+
+		/* MCS set */
 		memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+		pos += sizeof(sband->ht_cap.mcs);
+
+		/* extended capabilities */
+		pos += sizeof(__le16);
+
+		/* BF capabilities */
+		pos += sizeof(__le32);
+
+		/* antenna selection */
+		pos += sizeof(u8);
 	}
 
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
@@ -932,6 +981,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 
 	mutex_lock(&local->iflist_mtx);
 	ieee80211_recalc_ps(local, -1);
+	ieee80211_recalc_smps(local, sdata);
 	mutex_unlock(&local->iflist_mtx);
 
 	netif_start_queue(sdata->dev);
@@ -2327,6 +2377,11 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 		ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
 
 	mutex_init(&ifmgd->mtx);
+
+	if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
+		ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
+	else
+		ifmgd->req_smps = IEEE80211_SMPS_OFF;
 }
 
 /* scan finished notification */
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index b4608f11a40f..0c0850d37dda 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -134,6 +134,40 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 	dev_kfree_skb(skb);
 }
 
+static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
+{
+	struct ieee80211_mgmt *mgmt = (void *) skb->data;
+	struct ieee80211_local *local = sta->local;
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+
+	if (ieee80211_is_action(mgmt->frame_control) &&
+	    sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    mgmt->u.action.category == WLAN_CATEGORY_HT &&
+	    mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS) {
+		/*
+		 * This update looks racy, but isn't -- if we come
+		 * here we've definitely got a station that we're
+		 * talking to, and on a managed interface that can
+		 * only be the AP. And the only other place updating
+		 * this variable is before we're associated.
+		 */
+		switch (mgmt->u.action.u.ht_smps.smps_control) {
+		case WLAN_HT_SMPS_CONTROL_DYNAMIC:
+			sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_DYNAMIC;
+			break;
+		case WLAN_HT_SMPS_CONTROL_STATIC:
+			sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_STATIC;
+			break;
+		case WLAN_HT_SMPS_CONTROL_DISABLED:
+		default: /* shouldn't happen since we don't send that */
+			sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_OFF;
+			break;
+		}
+
+		ieee80211_queue_work(&local->hw, &local->recalc_smps);
+	}
+}
+
 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct sk_buff *skb2;
@@ -210,6 +244,10 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 		rate_control_tx_status(local, sband, sta, skb);
 		if (ieee80211_vif_is_mesh(&sta->sdata->vif))
 			ieee80211s_update_metric(local, sta, skb);
+
+		if (!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+		    (info->flags & IEEE80211_TX_STAT_ACK))
+			ieee80211_frame_acked(sta, skb);
 	}
 
 	rcu_read_unlock();
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index d54dbe8e09ba..086ef6257b4b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1170,3 +1170,77 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	return 0;
 }
 
+static int check_mgd_smps(struct ieee80211_if_managed *ifmgd,
+			  enum ieee80211_smps_mode *smps_mode)
+{
+	if (ifmgd->associated) {
+		*smps_mode = ifmgd->ap_smps;
+
+		if (*smps_mode == IEEE80211_SMPS_AUTOMATIC) {
+			if (ifmgd->powersave)
+				*smps_mode = IEEE80211_SMPS_DYNAMIC;
+			else
+				*smps_mode = IEEE80211_SMPS_OFF;
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/* must hold iflist_mtx */
+void ieee80211_recalc_smps(struct ieee80211_local *local,
+			   struct ieee80211_sub_if_data *forsdata)
+{
+	struct ieee80211_sub_if_data *sdata;
+	enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_OFF;
+	int count = 0;
+
+	if (forsdata)
+		WARN_ON(!mutex_is_locked(&forsdata->u.mgd.mtx));
+
+	WARN_ON(!mutex_is_locked(&local->iflist_mtx));
+
+	/*
+	 * This function could be improved to handle multiple
+	 * interfaces better, but right now it makes any
+	 * non-station interfaces force SM PS to be turned
+	 * off. If there are multiple station interfaces it
+	 * could also use the best possible mode, e.g. if
+	 * one is in static and the other in dynamic then
+	 * dynamic is ok.
+	 */
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		if (sdata->vif.type != NL80211_IFTYPE_STATION)
+			goto set;
+		if (sdata != forsdata) {
+			/*
+			 * This nested is ok -- we are holding the iflist_mtx
+			 * so can't get here twice or so. But it's required
+			 * since normally we acquire it first and then the
+			 * iflist_mtx.
+			 */
+			mutex_lock_nested(&sdata->u.mgd.mtx, SINGLE_DEPTH_NESTING);
+			count += check_mgd_smps(&sdata->u.mgd, &smps_mode);
+			mutex_unlock(&sdata->u.mgd.mtx);
+		} else
+			count += check_mgd_smps(&sdata->u.mgd, &smps_mode);
+
+		if (count > 1) {
+			smps_mode = IEEE80211_SMPS_OFF;
+			break;
+		}
+	}
+
+	if (smps_mode == local->smps_mode)
+		return;
+
+ set:
+	local->smps_mode = smps_mode;
+	/* changed flag is auto-detected for this */
+	ieee80211_hw_config(local, 0);
+}
-- 
cgit v1.2.3


From 8b73d13a21ae889e747cac180ff27c5a0a88e6a4 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 1 Dec 2009 14:24:24 +0100
Subject: mac80211_hwsim: implement ampdu action

Not that we actually ever aggregate anything, but
it could potentially be useful anyhow to simulate
aggregation sessions.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 92c669ebb358..89f527ee1a10 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -841,6 +841,31 @@ static int mac80211_hwsim_testmode_cmd(struct ieee80211_hw *hw,
 }
 #endif
 
+static int mac80211_hwsim_ampdu_action(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       enum ieee80211_ampdu_mlme_action action,
+				       struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+{
+	switch (action) {
+	case IEEE80211_AMPDU_TX_START:
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_STOP:
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		break;
+	case IEEE80211_AMPDU_RX_START:
+	case IEEE80211_AMPDU_RX_STOP:
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+
 static const struct ieee80211_ops mac80211_hwsim_ops =
 {
 	.tx = mac80211_hwsim_tx,
@@ -855,6 +880,7 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 	.set_tim = mac80211_hwsim_set_tim,
 	.conf_tx = mac80211_hwsim_conf_tx,
 	CFG80211_TESTMODE_CMD(mac80211_hwsim_testmode_cmd)
+	.ampdu_action = mac80211_hwsim_ampdu_action,
 };
 
 
-- 
cgit v1.2.3


From c24ef46e6b1597e54f185e0b48eb9073ef155a8c Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:25:56 +0100
Subject: libertas: use priv->mesh_tlv instead of priv->mesh_fw_ver

Both variables contained the same information (no mesh, old mesh, new mesh).
So we can get rid of one variable.

Also move the mesh-version test from cmd.c into mesh.c.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cmd.c  | 13 -------------
 drivers/net/wireless/libertas/defs.h |  7 -------
 drivers/net/wireless/libertas/dev.h  |  1 -
 drivers/net/wireless/libertas/mesh.c | 23 ++++++++++++++++-------
 4 files changed, 16 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index b9b371bfa30f..dd69191f24eb 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -143,19 +143,6 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
 		    cmd.hwifversion, cmd.version);
 
-	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
-	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
-	/* 5.110.22 have mesh command with 0xa3 command id */
-	/* 10.0.0.p0 FW brings in mesh config command with different id */
-	/* Check FW version MSB and initialize mesh_fw_ver */
-	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
-		priv->mesh_fw_ver = MESH_FW_OLD;
-	else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
-		(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK))
-		priv->mesh_fw_ver = MESH_FW_NEW;
-	else
-		priv->mesh_fw_ver = MESH_NONE;
-
 	/* Clamp region code to 8-bit since FW spec indicates that it should
 	 * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
 	 * returns non-zero high 8 bits here.
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 6b6ea9f7bf5b..ea3f10ef4e00 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -397,13 +397,6 @@ enum KEY_INFO_WPA {
 	KEY_INFO_WPA_ENABLED = 0x04
 };
 
-/** mesh_fw_ver */
-enum _mesh_fw_ver {
-	MESH_NONE = 0, /* MESH is not supported */
-	MESH_FW_OLD,   /* MESH is supported in FW V5 */
-	MESH_FW_NEW,   /* MESH is supported in FW V10 and newer */
-};
-
 /* Default values for fwt commands. */
 #define FWT_DEFAULT_METRIC 0
 #define FWT_DEFAULT_DIR 1
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 6a8d2b291d8c..505b8feaa8b4 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -42,7 +42,6 @@ struct lbs_private {
 	u32 mesh_connect_status;
 	struct lbs_mesh_stats mstats;
 	int mesh_open;
-	int mesh_fw_ver;
 	int mesh_autostart_enabled;
 	uint16_t mesh_tlv;
 	u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1];
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index 2f91c9b808af..1d94f7d4efc8 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -196,7 +196,12 @@ int lbs_init_mesh(struct lbs_private *priv)
 
 	lbs_deb_enter(LBS_DEB_MESH);
 
-	if (priv->mesh_fw_ver == MESH_FW_OLD) {
+	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
+	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
+	/* 5.110.22 have mesh command with 0xa3 command id */
+	/* 10.0.0.p0 FW brings in mesh config command with different id */
+	/* Check FW version MSB and initialize mesh_fw_ver */
+	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) {
 		/* Enable mesh, if supported, and work out which TLV it uses.
 		   0x100 + 291 is an unofficial value used in 5.110.20.pXX
 		   0x100 + 37 is the official value used in 5.110.21.pXX
@@ -218,7 +223,9 @@ int lbs_init_mesh(struct lbs_private *priv)
 					    priv->channel))
 				priv->mesh_tlv = 0;
 		}
-	} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+	} else
+	if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
+		(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) {
 		/* 10.0.0.pXX new firmwares should succeed with TLV
 		 * 0x100+37; Do not invoke command with old TLV.
 		 */
@@ -227,6 +234,8 @@ int lbs_init_mesh(struct lbs_private *priv)
 				    priv->channel))
 			priv->mesh_tlv = 0;
 	}
+
+
 	if (priv->mesh_tlv) {
 		lbs_add_mesh(priv);
 
@@ -416,10 +425,10 @@ struct net_device *lbs_mesh_set_dev(struct lbs_private *priv,
 	struct net_device *dev, struct rxpd *rxpd)
 {
 	if (priv->mesh_dev) {
-		if (priv->mesh_fw_ver == MESH_FW_OLD) {
+		if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) {
 			if (rxpd->rx_control & RxPD_MESH_FRAME)
 				dev = priv->mesh_dev;
-		} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+		} else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) {
 			if (rxpd->u.bss.bss_num == MESH_IFACE_ID)
 				dev = priv->mesh_dev;
 		}
@@ -432,9 +441,9 @@ void lbs_mesh_set_txpd(struct lbs_private *priv,
 	struct net_device *dev, struct txpd *txpd)
 {
 	if (dev == priv->mesh_dev) {
-		if (priv->mesh_fw_ver == MESH_FW_OLD)
+		if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID)
 			txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
-		else if (priv->mesh_fw_ver == MESH_FW_NEW)
+		else if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
 			txpd->u.bss.bss_num = MESH_IFACE_ID;
 	}
 }
@@ -538,7 +547,7 @@ static int __lbs_mesh_config_send(struct lbs_private *priv,
 	 * Command id is 0xac for v10 FW along with mesh interface
 	 * id in bits 14-13-12.
 	 */
-	if (priv->mesh_fw_ver == MESH_FW_NEW)
+	if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
 		command = CMD_MESH_CONFIG |
 			  (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
 
-- 
cgit v1.2.3


From d6ede678c138061f5202b519f8f8d6372e2cb5bb Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:25:57 +0100
Subject: libertas: remove mesh_autostart_enabled and sync_channel

mesh_autostart_enabled was nowhere set. Rumor is that this is used in the
OLPC tree, but they never did submit their code upstream.

After removing this code, it turned out that the sync_channel stuff is now
also unused, so get rid of that as well.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cmdresp.c | 16 ++--------------
 drivers/net/wireless/libertas/dev.h     |  2 --
 drivers/net/wireless/libertas/main.c    | 13 -------------
 3 files changed, 2 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 21d57690c20a..0334a58820ee 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -485,20 +485,8 @@ int lbs_process_event(struct lbs_private *priv, u32 event)
 		break;
 
 	case MACREG_INT_CODE_MESH_AUTO_STARTED:
-		/* Ignore spurious autostart events if autostart is disabled */
-		if (!priv->mesh_autostart_enabled) {
-			lbs_pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
-			break;
-		}
-		lbs_pr_info("EVENT: MESH_AUTO_STARTED\n");
-		priv->mesh_connect_status = LBS_CONNECTED;
-		if (priv->mesh_open) {
-			netif_carrier_on(priv->mesh_dev);
-			if (!priv->tx_pending_len)
-				netif_wake_queue(priv->mesh_dev);
-		}
-		priv->mode = IW_MODE_ADHOC;
-		schedule_work(&priv->sync_channel);
+		/* Ignore spurious autostart events */
+		lbs_pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
 		break;
 
 	default:
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 505b8feaa8b4..159de3ec9c44 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -42,11 +42,9 @@ struct lbs_private {
 	u32 mesh_connect_status;
 	struct lbs_mesh_stats mstats;
 	int mesh_open;
-	int mesh_autostart_enabled;
 	uint16_t mesh_tlv;
 	u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1];
 	u8 mesh_ssid_len;
-	struct work_struct sync_channel;
 
 	/* Monitor mode */
 	struct net_device *rtap_net_dev;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index db38a5a719fa..b0799e347ba2 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -806,18 +806,6 @@ int lbs_exit_auto_deep_sleep(struct lbs_private *priv)
 	return 0;
 }
 
-static void lbs_sync_channel_worker(struct work_struct *work)
-{
-	struct lbs_private *priv = container_of(work, struct lbs_private,
-		sync_channel);
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-	if (lbs_update_channel(priv))
-		lbs_pr_info("Channel synchronization failed.");
-	lbs_deb_leave(LBS_DEB_MAIN);
-}
-
-
 static int lbs_init_adapter(struct lbs_private *priv)
 {
 	size_t bufsize;
@@ -997,7 +985,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 	INIT_DELAYED_WORK(&priv->assoc_work, lbs_association_worker);
 	INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
 	INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
-	INIT_WORK(&priv->sync_channel, lbs_sync_channel_worker);
 
 	priv->mesh_open = 0;
 	sprintf(priv->mesh_ssid, "mesh");
-- 
cgit v1.2.3


From 55e1ff924414111a6afbfde00375a1302aef9353 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:25:58 +0100
Subject: libertas: move mesh-related definitions into mesh.h

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cmd.h  | 12 ------------
 drivers/net/wireless/libertas/mesh.h |  9 +++++++++
 2 files changed, 9 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h
index 2862748aef70..cb4138a55fdf 100644
--- a/drivers/net/wireless/libertas/cmd.h
+++ b/drivers/net/wireless/libertas/cmd.h
@@ -110,18 +110,6 @@ int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val);
 int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val);
 
 
-/* Mesh related */
-
-int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
-		    struct cmd_ds_mesh_access *cmd);
-
-int lbs_mesh_config_send(struct lbs_private *priv,
-			 struct cmd_ds_mesh_config *cmd,
-			 uint16_t action, uint16_t type);
-
-int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
-
-
 /* Commands only used in wext.c, assoc. and scan.c */
 
 int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h
index fea9b5d005fc..b642d5d11699 100644
--- a/drivers/net/wireless/libertas/mesh.h
+++ b/drivers/net/wireless/libertas/mesh.h
@@ -46,11 +46,20 @@ void lbs_mesh_set_txpd(struct lbs_private *priv,
 /* Command handling */
 
 struct cmd_ds_command;
+struct cmd_ds_mesh_access;
+struct cmd_ds_mesh_config;
 
 int lbs_cmd_bt_access(struct cmd_ds_command *cmd,
 	u16 cmd_action, void *pdata_buf);
 int lbs_cmd_fwt_access(struct cmd_ds_command *cmd,
 	u16 cmd_action, void *pdata_buf);
+int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
+		    struct cmd_ds_mesh_access *cmd);
+int lbs_mesh_config_send(struct lbs_private *priv,
+			 struct cmd_ds_mesh_config *cmd,
+			 uint16_t action, uint16_t type);
+int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
+
 
 
 /* Persistent configuration */
-- 
cgit v1.2.3


From cd74468b8c56c1a809d9b7f913f11d8181c3a0b2 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:25:59 +0100
Subject: libertas: decouple mesh and rtap

While it's might be technically true that only MESH-enabled firmwares
are also RTAP-enabled, I like to have this decoupled.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/main.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index b0799e347ba2..ad3434011897 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1062,6 +1062,17 @@ void lbs_remove_card(struct lbs_private *priv)
 EXPORT_SYMBOL_GPL(lbs_remove_card);
 
 
+static int lbs_rtap_supported(struct lbs_private *priv)
+{
+	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
+		return 1;
+
+	/* newer firmware use a capability mask */
+	return ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
+		(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK));
+}
+
+
 int lbs_start_card(struct lbs_private *priv)
 {
 	struct net_device *dev = priv->dev;
@@ -1081,12 +1092,14 @@ int lbs_start_card(struct lbs_private *priv)
 
 	lbs_update_channel(priv);
 
+	lbs_init_mesh(priv);
+
 	/*
 	 * While rtap isn't related to mesh, only mesh-enabled
 	 * firmware implements the rtap functionality via
 	 * CMD_802_11_MONITOR_MODE.
 	 */
-	if (lbs_init_mesh(priv)) {
+	if (lbs_rtap_supported(priv)) {
 		if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
 			lbs_pr_err("cannot register lbs_rtap attribute\n");
 	}
@@ -1120,7 +1133,9 @@ void lbs_stop_card(struct lbs_private *priv)
 	netif_carrier_off(dev);
 
 	lbs_debugfs_remove_one(priv);
-	if (lbs_deinit_mesh(priv))
+	lbs_deinit_mesh(priv);
+
+	if (lbs_rtap_supported(priv))
 		device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
 
 	/* Delete the timeout of the currently processing command */
-- 
cgit v1.2.3


From e4da1a81a967c05dfde6f0498cff1f6fe6683f52 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:26:00 +0100
Subject: libertas: move mesh SSID initialization into mesh.c

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/main.c | 4 ----
 drivers/net/wireless/libertas/mesh.c | 3 +++
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index ad3434011897..127b7f60c320 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -986,10 +986,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 	INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
 	INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
 
-	priv->mesh_open = 0;
-	sprintf(priv->mesh_ssid, "mesh");
-	priv->mesh_ssid_len = 4;
-
 	priv->wol_criteria = 0xffffffff;
 	priv->wol_gpio = 0xff;
 
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index 1d94f7d4efc8..4f67c8b62edc 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -237,6 +237,9 @@ int lbs_init_mesh(struct lbs_private *priv)
 
 
 	if (priv->mesh_tlv) {
+		sprintf(priv->mesh_ssid, "mesh");
+		priv->mesh_ssid_len = 4;
+
 		lbs_add_mesh(priv);
 
 		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-- 
cgit v1.2.3


From 602114ae595af6c89eab149cf9f939e3f7ef4a34 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:26:01 +0100
Subject: libertas: add access functions for mesh open/connect status

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cmd.c  | 2 +-
 drivers/net/wireless/libertas/main.c | 5 ++---
 drivers/net/wireless/libertas/mesh.c | 3 ++-
 drivers/net/wireless/libertas/mesh.h | 6 ++++++
 drivers/net/wireless/libertas/scan.c | 2 +-
 drivers/net/wireless/libertas/tx.c   | 2 +-
 drivers/net/wireless/libertas/wext.c | 6 +++---
 7 files changed, 16 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index dd69191f24eb..4a198113f9be 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1304,7 +1304,7 @@ int lbs_execute_next_command(struct lbs_private *priv)
 		if ((priv->psmode != LBS802_11POWERMODECAM) &&
 		    (priv->psstate == PS_STATE_FULL_POWER) &&
 		    ((priv->connect_status == LBS_CONNECTED) ||
-		    (priv->mesh_connect_status == LBS_CONNECTED))) {
+		    lbs_mesh_connected(priv))) {
 			if (priv->secinfo.WPAenabled ||
 			    priv->secinfo.WPA2enabled) {
 				/* check for valid WPA group keys */
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 127b7f60c320..64b327d4548b 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -123,7 +123,7 @@ static ssize_t lbs_rtap_set(struct device *dev,
 		if (priv->monitormode == monitor_mode)
 			return strlen(buf);
 		if (!priv->monitormode) {
-			if (priv->infra_open || priv->mesh_open)
+			if (priv->infra_open || lbs_mesh_open(priv))
 				return -EBUSY;
 			if (priv->mode == IW_MODE_INFRA)
 				lbs_cmd_80211_deauthenticate(priv,
@@ -619,7 +619,7 @@ static int lbs_thread(void *data)
 				if (priv->connect_status == LBS_CONNECTED)
 					netif_wake_queue(priv->dev);
 				if (priv->mesh_dev &&
-				    priv->mesh_connect_status == LBS_CONNECTED)
+				    lbs_mesh_connected(priv))
 					netif_wake_queue(priv->mesh_dev);
 			}
 		}
@@ -833,7 +833,6 @@ static int lbs_init_adapter(struct lbs_private *priv)
 	memset(priv->current_addr, 0xff, ETH_ALEN);
 
 	priv->connect_status = LBS_DISCONNECTED;
-	priv->mesh_connect_status = LBS_DISCONNECTED;
 	priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
 	priv->mode = IW_MODE_INFRA;
 	priv->channel = DEFAULT_AD_HOC_CHANNEL;
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index 4f67c8b62edc..954cd00f7452 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -1,4 +1,3 @@
-#include <linux/moduleparam.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
@@ -196,6 +195,8 @@ int lbs_init_mesh(struct lbs_private *priv)
 
 	lbs_deb_enter(LBS_DEB_MESH);
 
+	priv->mesh_connect_status = LBS_DISCONNECTED;
+
 	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
 	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
 	/* 5.110.22 have mesh command with 0xa3 command id */
diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h
index b642d5d11699..388c39281b7d 100644
--- a/drivers/net/wireless/libertas/mesh.h
+++ b/drivers/net/wireless/libertas/mesh.h
@@ -84,4 +84,10 @@ void lbs_mesh_ethtool_get_strings(struct net_device *dev,
 	uint32_t stringset, uint8_t *s);
 
 
+/* Accessors */
+
+#define lbs_mesh_open(priv) (priv->mesh_open)
+#define lbs_mesh_connected(priv) (priv->mesh_connect_status == LBS_CONNECTED)
+
+
 #endif
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index c6a6c042b82f..4a0c3e3cd3b1 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -640,7 +640,7 @@ out:
 		if (!priv->tx_pending_len)
 			netif_wake_queue(priv->dev);
 	}
-	if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) {
+	if (priv->mesh_dev && lbs_mesh_connected(priv)) {
 		netif_carrier_on(priv->mesh_dev);
 		if (!priv->tx_pending_len)
 			netif_wake_queue(priv->mesh_dev);
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 315d1ce286ca..52d244ea3d97 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -198,7 +198,7 @@ void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
 	if (priv->connect_status == LBS_CONNECTED)
 		netif_wake_queue(priv->dev);
 
-	if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED))
+	if (priv->mesh_dev && lbs_mesh_connected(priv))
 		netif_wake_queue(priv->mesh_dev);
 }
 EXPORT_SYMBOL_GPL(lbs_send_tx_feedback);
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index a8eb9e1fcf36..c0c7bc40b109 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -192,7 +192,7 @@ static void copy_active_data_rates(struct lbs_private *priv, u8 *rates)
 	lbs_deb_enter(LBS_DEB_WEXT);
 
 	if ((priv->connect_status != LBS_CONNECTED) &&
-		(priv->mesh_connect_status != LBS_CONNECTED))
+		!lbs_mesh_connected(priv))
 		memcpy(rates, lbs_bg_rates, MAX_RATES);
 	else
 		memcpy(rates, priv->curbssparams.rates, MAX_RATES);
@@ -307,7 +307,7 @@ static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
 
 	/* Use nickname to indicate that mesh is on */
 
-	if (priv->mesh_connect_status == LBS_CONNECTED) {
+	if (lbs_mesh_connected(priv)) {
 		strncpy(extra, "Mesh", 12);
 		extra[12] = '\0';
 		dwrq->length = strlen(extra);
@@ -863,7 +863,7 @@ static struct iw_statistics *lbs_get_wireless_stats(struct net_device *dev)
 
 	/* If we're not associated, all quality values are meaningless */
 	if ((priv->connect_status != LBS_CONNECTED) &&
-	    (priv->mesh_connect_status != LBS_CONNECTED))
+	    !lbs_mesh_connected(priv))
 		goto out;
 
 	/* Quality by RSSI */
-- 
cgit v1.2.3


From 4143a23de096910e3ceb0939f41de6ffb8c59475 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:26:02 +0100
Subject: libertas: make mesh configurable

Mostly for the embedded people that know beforehand that they don't need
MESH at all and want to save some bytes, but also helpful for the upcoming
cfg80211 transition.

   text    data     bss     dec     hex filename
 114264    2308     140  116712   1c7e8 libertas.ko   with mesh
 105026    2000     140  107166   1a29e libertas.ko   without mesh
 --------------------------------------------------
  -9238    -308           -9546

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/Kconfig   |  6 ++++++
 drivers/net/wireless/libertas/Makefile  |  2 +-
 drivers/net/wireless/libertas/cmd.c     |  4 ++++
 drivers/net/wireless/libertas/dev.h     |  2 ++
 drivers/net/wireless/libertas/ethtool.c |  2 ++
 drivers/net/wireless/libertas/mesh.h    | 17 +++++++++++++++++
 drivers/net/wireless/libertas/wext.c    | 20 +++++++++++++++-----
 7 files changed, 47 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig
index 30aa9d48d67e..0485c9957575 100644
--- a/drivers/net/wireless/libertas/Kconfig
+++ b/drivers/net/wireless/libertas/Kconfig
@@ -37,3 +37,9 @@ config LIBERTAS_DEBUG
 	depends on LIBERTAS
 	---help---
 	  Debugging support.
+
+config LIBERTAS_MESH
+	bool "Enable mesh support"
+	depends on LIBERTAS
+	help
+	  This enables Libertas' MESH support, used by e.g. the OLPC people.
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index b188cd97a053..45e870e33117 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -5,11 +5,11 @@ libertas-y += cmdresp.o
 libertas-y += debugfs.o
 libertas-y += ethtool.o
 libertas-y += main.o
-libertas-y += mesh.o
 libertas-y += rx.o
 libertas-y += scan.o
 libertas-y += tx.o
 libertas-y += wext.o
+libertas-$(CONFIG_LIBERTAS_MESH) += mesh.o
 
 usb8xxx-objs += if_usb.o
 libertas_cs-objs += if_cs.o
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 4a198113f9be..4a0d8f4188ca 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -998,6 +998,8 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		ret = 0;
 		break;
 
+#ifdef CONFIG_LIBERTAS_MESH
+
 	case CMD_BT_ACCESS:
 		ret = lbs_cmd_bt_access(cmdptr, cmd_action, pdata_buf);
 		break;
@@ -1006,6 +1008,8 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		ret = lbs_cmd_fwt_access(cmdptr, cmd_action, pdata_buf);
 		break;
 
+#endif
+
 	case CMD_802_11_BEACON_CTRL:
 		ret = lbs_cmd_bcn_ctrl(priv, cmdptr, cmd_action);
 		break;
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 159de3ec9c44..7330ab8521cc 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -39,12 +39,14 @@ struct lbs_private {
 
 	/* Mesh */
 	struct net_device *mesh_dev; /* Virtual device */
+#ifdef CONFIG_LIBERTAS_MESH
 	u32 mesh_connect_status;
 	struct lbs_mesh_stats mstats;
 	int mesh_open;
 	uint16_t mesh_tlv;
 	u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1];
 	u8 mesh_ssid_len;
+#endif
 
 	/* Monitor mode */
 	struct net_device *rtap_net_dev;
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index 63d020374c2b..3804a58d7f4e 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -114,9 +114,11 @@ const struct ethtool_ops lbs_ethtool_ops = {
 	.get_drvinfo = lbs_ethtool_get_drvinfo,
 	.get_eeprom =  lbs_ethtool_get_eeprom,
 	.get_eeprom_len = lbs_ethtool_get_eeprom_len,
+#ifdef CONFIG_LIBERTAS_MESH
 	.get_sset_count = lbs_mesh_ethtool_get_sset_count,
 	.get_ethtool_stats = lbs_mesh_ethtool_get_stats,
 	.get_strings = lbs_mesh_ethtool_get_strings,
+#endif
 	.get_wol = lbs_ethtool_get_wol,
 	.set_wol = lbs_ethtool_set_wol,
 };
diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h
index 388c39281b7d..e2573303a328 100644
--- a/drivers/net/wireless/libertas/mesh.h
+++ b/drivers/net/wireless/libertas/mesh.h
@@ -9,6 +9,8 @@
 #include <net/lib80211.h>
 
 
+#ifdef CONFIG_LIBERTAS_MESH
+
 /* Mesh statistics */
 struct lbs_mesh_stats {
 	u32	fwd_bcast_cnt;		/* Fwd: Broadcast counter */
@@ -89,5 +91,20 @@ void lbs_mesh_ethtool_get_strings(struct net_device *dev,
 #define lbs_mesh_open(priv) (priv->mesh_open)
 #define lbs_mesh_connected(priv) (priv->mesh_connect_status == LBS_CONNECTED)
 
+#else
+
+#define lbs_init_mesh(priv)
+#define lbs_deinit_mesh(priv)
+#define lbs_add_mesh(priv)
+#define lbs_remove_mesh(priv)
+#define lbs_mesh_set_dev(priv, dev, rxpd) (dev)
+#define lbs_mesh_set_txpd(priv, dev, txpd)
+#define lbs_mesh_config(priv, enable, chan)
+#define lbs_mesh_open(priv) (0)
+#define lbs_mesh_connected(priv) (0)
+
+#endif
+
+
 
 #endif
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index c0c7bc40b109..f07ba0b6c5f1 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -298,6 +298,7 @@ static int lbs_get_nick(struct net_device *dev, struct iw_request_info *info,
 	return 0;
 }
 
+#ifdef CONFIG_LIBERTAS_MESH
 static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_point *dwrq, char *extra)
 {
@@ -321,6 +322,7 @@ static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
 	lbs_deb_leave(LBS_DEB_WEXT);
 	return 0;
 }
+#endif
 
 static int lbs_set_rts(struct net_device *dev, struct iw_request_info *info,
 			struct iw_param *vwrq, char *extra)
@@ -422,6 +424,7 @@ static int lbs_get_mode(struct net_device *dev,
 	return 0;
 }
 
+#ifdef CONFIG_LIBERTAS_MESH
 static int mesh_wlan_get_mode(struct net_device *dev,
 		              struct iw_request_info *info, u32 * uwrq,
 			      char *extra)
@@ -433,6 +436,7 @@ static int mesh_wlan_get_mode(struct net_device *dev,
 	lbs_deb_leave(LBS_DEB_WEXT);
 	return 0;
 }
+#endif
 
 static int lbs_get_txpow(struct net_device *dev,
 			  struct iw_request_info *info,
@@ -1010,6 +1014,7 @@ out:
 	return ret;
 }
 
+#ifdef CONFIG_LIBERTAS_MESH
 static int lbs_mesh_set_freq(struct net_device *dev,
 			     struct iw_request_info *info,
 			     struct iw_freq *fwrq, char *extra)
@@ -1061,6 +1066,7 @@ out:
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret);
 	return ret;
 }
+#endif
 
 static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
 		  struct iw_param *vwrq, char *extra)
@@ -2110,6 +2116,7 @@ out:
 	return ret;
 }
 
+#ifdef CONFIG_LIBERTAS_MESH
 static int lbs_mesh_get_essid(struct net_device *dev,
 			      struct iw_request_info *info,
 			      struct iw_point *dwrq, char *extra)
@@ -2163,6 +2170,7 @@ static int lbs_mesh_set_essid(struct net_device *dev,
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret);
 	return ret;
 }
+#endif
 
 /**
  *  @brief Connect to the AP or Ad-hoc Network with specific bssid
@@ -2269,7 +2277,13 @@ static const iw_handler lbs_handler[] = {
 	(iw_handler) lbs_get_encodeext,/* SIOCGIWENCODEEXT */
 	(iw_handler) NULL,		/* SIOCSIWPMKSA */
 };
+struct iw_handler_def lbs_handler_def = {
+	.num_standard	= ARRAY_SIZE(lbs_handler),
+	.standard	= (iw_handler *) lbs_handler,
+	.get_wireless_stats = lbs_get_wireless_stats,
+};
 
+#ifdef CONFIG_LIBERTAS_MESH
 static const iw_handler mesh_wlan_handler[] = {
 	(iw_handler) NULL,	/* SIOCSIWCOMMIT */
 	(iw_handler) lbs_get_name,	/* SIOCGIWNAME */
@@ -2327,14 +2341,10 @@ static const iw_handler mesh_wlan_handler[] = {
 	(iw_handler) lbs_get_encodeext,/* SIOCGIWENCODEEXT */
 	(iw_handler) NULL,		/* SIOCSIWPMKSA */
 };
-struct iw_handler_def lbs_handler_def = {
-	.num_standard	= ARRAY_SIZE(lbs_handler),
-	.standard	= (iw_handler *) lbs_handler,
-	.get_wireless_stats = lbs_get_wireless_stats,
-};
 
 struct iw_handler_def mesh_handler_def = {
 	.num_standard	= ARRAY_SIZE(mesh_wlan_handler),
 	.standard	= (iw_handler *) mesh_wlan_handler,
 	.get_wireless_stats = lbs_get_wireless_stats,
 };
+#endif
-- 
cgit v1.2.3


From 0e78ff8fcc6dabeda313719deb751afbd20bea41 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:26:03 +0100
Subject: libertas: remove priv->capability

This variable was once set to WLAN_CAPABILITY_SHORT_PREAMBLE and
there's no code that could change the variable to something else.
Therefore it seems this is not necessary :-)

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/assoc.c | 13 +++----------
 drivers/net/wireless/libertas/cmd.c   |  3 ---
 drivers/net/wireless/libertas/dev.h   |  1 -
 drivers/net/wireless/libertas/main.c  |  1 -
 4 files changed, 3 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 751067369ba8..5f58ae33405b 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -807,8 +807,7 @@ static int lbs_try_associate(struct lbs_private *priv,
 	}
 
 	/* Use short preamble only when both the BSS and firmware support it */
-	if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) &&
-	    (assoc_req->bss.capability & WLAN_CAPABILITY_SHORT_PREAMBLE))
+	if (assoc_req->bss.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
 		preamble = RADIO_PREAMBLE_SHORT;
 
 	ret = lbs_set_radio(priv, preamble, 1);
@@ -939,8 +938,7 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	}
 
 	/* Use short preamble only when both the BSS and firmware support it */
-	if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) &&
-	    (bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) {
+	if (bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) {
 		lbs_deb_join("AdhocJoin: Short preamble\n");
 		preamble = RADIO_PREAMBLE_SHORT;
 	}
@@ -1049,7 +1047,7 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 	struct assoc_request *assoc_req)
 {
 	struct cmd_ds_802_11_ad_hoc_start cmd;
-	u8 preamble = RADIO_PREAMBLE_LONG;
+	u8 preamble = RADIO_PREAMBLE_SHORT;
 	size_t ratesize = 0;
 	u16 tmpcap = 0;
 	int ret = 0;
@@ -1057,11 +1055,6 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
-	if (priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) {
-		lbs_deb_join("ADHOC_START: Will use short preamble\n");
-		preamble = RADIO_PREAMBLE_SHORT;
-	}
-
 	ret = lbs_set_radio(priv, preamble, 1);
 	if (ret)
 		goto out;
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 4a0d8f4188ca..42051f7cad6d 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -842,9 +842,6 @@ int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on)
 	if (priv->fwrelease < 0x09000000) {
 		switch (preamble) {
 		case RADIO_PREAMBLE_SHORT:
-			if (!(priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE))
-				goto out;
-			/* Fall through */
 		case RADIO_PREAMBLE_AUTO:
 		case RADIO_PREAMBLE_LONG:
 			cmd.control = cpu_to_le16(preamble);
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 7330ab8521cc..cf47cf53458f 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -175,7 +175,6 @@ struct lbs_private {
 	struct bss_descriptor *networks;
 	struct assoc_request * pending_assoc_req;
 	struct assoc_request * in_progress_assoc_req;
-	u16 capability;
 	uint16_t enablehwauto;
 	uint16_t ratebitmap;
 
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 64b327d4548b..f9f195f7b17c 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -839,7 +839,6 @@ static int lbs_init_adapter(struct lbs_private *priv)
 	priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
 	priv->radio_on = 1;
 	priv->enablehwauto = 1;
-	priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE;
 	priv->psmode = LBS802_11POWERMODECAM;
 	priv->psstate = PS_STATE_FULL_POWER;
 	priv->is_deep_sleep = 0;
-- 
cgit v1.2.3


From 48631de9218a4563a6632e105676f42db3849c57 Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@googlemail.com>
Date: Wed, 2 Dec 2009 15:26:04 +0100
Subject: libertas: remove priv->ratebitmap

Used to be a write-only-variable :-)

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/assoc.c | 4 +---
 drivers/net/wireless/libertas/dev.h   | 1 -
 2 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 5f58ae33405b..5e650f358415 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -390,10 +390,8 @@ int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
 	cmd.enablehwauto = cpu_to_le16(priv->enablehwauto);
 	cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto);
 	ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd);
-	if (!ret && cmd_action == CMD_ACT_GET) {
-		priv->ratebitmap = le16_to_cpu(cmd.bitmap);
+	if (!ret && cmd_action == CMD_ACT_GET)
 		priv->enablehwauto = le16_to_cpu(cmd.enablehwauto);
-	}
 
 	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
 	return ret;
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index cf47cf53458f..d5a9dcae4059 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -176,7 +176,6 @@ struct lbs_private {
 	struct assoc_request * pending_assoc_req;
 	struct assoc_request * in_progress_assoc_req;
 	uint16_t enablehwauto;
-	uint16_t ratebitmap;
 
 	/* ADHOC */
 	u16 beacon_period;
-- 
cgit v1.2.3


From d80050c4c321a74cea28c6ef9695d8427a928417 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 2 Dec 2009 20:56:11 -0800
Subject: iwmc3200wifi: Avoid an offset calculation for each management frame.

Determine the offset at compile time.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/rx.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 6bd253ac533f..0619d6a1103c 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -868,36 +868,35 @@ static int iwm_mlme_mgt_frame(struct iwm_priv *iwm, u8 *buf,
 	struct iwm_umac_notif_mgt_frame *mgt_frame =
 			(struct iwm_umac_notif_mgt_frame *)buf;
 	struct ieee80211_mgmt *mgt = (struct ieee80211_mgmt *)mgt_frame->frame;
-	u8 *ie;
 
 	IWM_HEXDUMP(iwm, DBG, MLME, "MGT: ", mgt_frame->frame,
 		    le16_to_cpu(mgt_frame->len));
 
 	if (ieee80211_is_assoc_req(mgt->frame_control)) {
-		ie = mgt->u.assoc_req.variable;;
-		iwm->req_ie_len =
-				le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+		iwm->req_ie_len = le16_to_cpu(mgt_frame->len)
+				  - offsetof(struct ieee80211_mgmt,
+					     u.assoc_req.variable);
 		kfree(iwm->req_ie);
 		iwm->req_ie = kmemdup(mgt->u.assoc_req.variable,
 				      iwm->req_ie_len, GFP_KERNEL);
 	} else if (ieee80211_is_reassoc_req(mgt->frame_control)) {
-		ie = mgt->u.reassoc_req.variable;;
-		iwm->req_ie_len =
-				le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+		iwm->req_ie_len = le16_to_cpu(mgt_frame->len)
+				  - offsetof(struct ieee80211_mgmt,
+					     u.reassoc_req.variable);
 		kfree(iwm->req_ie);
 		iwm->req_ie = kmemdup(mgt->u.reassoc_req.variable,
 				      iwm->req_ie_len, GFP_KERNEL);
 	} else if (ieee80211_is_assoc_resp(mgt->frame_control)) {
-		ie = mgt->u.assoc_resp.variable;;
-		iwm->resp_ie_len =
-				le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+		iwm->resp_ie_len = le16_to_cpu(mgt_frame->len)
+				   - offsetof(struct ieee80211_mgmt,
+					      u.assoc_resp.variable);
 		kfree(iwm->resp_ie);
 		iwm->resp_ie = kmemdup(mgt->u.assoc_resp.variable,
 				       iwm->resp_ie_len, GFP_KERNEL);
 	} else if (ieee80211_is_reassoc_resp(mgt->frame_control)) {
-		ie = mgt->u.reassoc_resp.variable;;
-		iwm->resp_ie_len =
-				le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+		iwm->resp_ie_len = le16_to_cpu(mgt_frame->len)
+				   - offsetof(struct ieee80211_mgmt,
+					      u.reassoc_resp.variable);
 		kfree(iwm->resp_ie);
 		iwm->resp_ie = kmemdup(mgt->u.reassoc_resp.variable,
 				       iwm->resp_ie_len, GFP_KERNEL);
-- 
cgit v1.2.3


From 265dc7f0964e4df95ab57a9d1618689301d39a55 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Fri, 4 Dec 2009 19:10:34 +0200
Subject: mac80211_hwsim: Check all local addresses for TX Ack status

Since mac80211_hwsim supports multiple virtual interfaces, we need to
iterate through all active interfaces when figuring out whether there
is a match during TX Ack status checking. This fixes TX status
reporting for cases where secondary interfaces are used.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 35 +++++++++++++++++++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 89f527ee1a10..718a5f198c30 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -436,6 +436,38 @@ static bool hwsim_ps_rx_ok(struct mac80211_hwsim_data *data,
 }
 
 
+struct mac80211_hwsim_addr_match_data {
+	bool ret;
+	const u8 *addr;
+};
+
+static void mac80211_hwsim_addr_iter(void *data, u8 *mac,
+				     struct ieee80211_vif *vif)
+{
+	struct mac80211_hwsim_addr_match_data *md = data;
+	if (memcmp(mac, md->addr, ETH_ALEN) == 0)
+		md->ret = true;
+}
+
+
+static bool mac80211_hwsim_addr_match(struct mac80211_hwsim_data *data,
+				      const u8 *addr)
+{
+	struct mac80211_hwsim_addr_match_data md;
+
+	if (memcmp(addr, data->hw->wiphy->perm_addr, ETH_ALEN) == 0)
+		return true;
+
+	md.ret = false;
+	md.addr = addr;
+	ieee80211_iterate_active_interfaces_atomic(data->hw,
+						   mac80211_hwsim_addr_iter,
+						   &md);
+
+	return md.ret;
+}
+
+
 static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 				    struct sk_buff *skb)
 {
@@ -488,8 +520,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 		if (nskb == NULL)
 			continue;
 
-		if (memcmp(hdr->addr1, data2->hw->wiphy->perm_addr,
-			   ETH_ALEN) == 0)
+		if (mac80211_hwsim_addr_match(data2, hdr->addr1))
 			ack = true;
 		memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status));
 		ieee80211_rx_irqsafe(data2->hw, nskb);
-- 
cgit v1.2.3


From c755ad34ab233afaaacd3d67190a8b74186f9fe8 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Mon, 7 Dec 2009 12:38:41 -0500
Subject: ath9k: add MCS rate index back to debufs rcstat

Speaking of 802.11n rates in terms of Mbps doesn't really developers
and is just useful for users. To aid debugging add the MCS index back
and an HT20/HT40 mode.

New screenshot:

    HT    MCS   Rate    Success    Retries   XRetries        PER
                6.0:          0          0          0          0
                9.0:          0          0          0          0
               12.0:         26        260          0         49
               18.0:         80        804          2         58
               24.0:          0          0          0          0
               36.0:          0          0          0          0
               48.0:          0          0          0          0
               54.0:          0          0          0          0
  HT20      0   6.5:       1368      13660          0         48
  HT20      1  13.0:          0          0          0          0
  HT20      2  19.5:          0          0          0          0
  HT20      3  26.0:          0          0          0          0
  HT20      4  39.0:          0          0          0          0
  HT20      5  52.0:         55        578         14         43
  HT20      6  58.5:         29        306          8         69
  HT20      7  65.0:         21        210          0         67
  HT20      8  13.0:         21        210          0         56
  HT20      9  26.0:          0          0          0          0
  HT20     10  39.0:          0          0          0          0
  HT20     11  52.0:          0          0          0          0
  HT20     12  78.0:          0          0          0          0
  HT20     13 104.0:          0          0          0          0
  HT20     14 117.0:          0          0          0          0
  HT20     15 130.0:         27        290         10         55
  HT40      0  13.5:         79        687         16         17
  HT40      1  27.5:         60        409         10         17
  HT40      2  40.5:         56        381         21         25
  HT40      3  54.0:         44        302         21         18
  HT40      4  81.5:         19        171          2         14
  HT40      5 108.0:          0          0          0          0
  HT40      6 121.5:          0          0          0          0
  HT40      7 135.0:          0          0          0          0
  HT40      7 150.0:          0          0          0          0
  HT40      8  27.0:          0          0          0          0
  HT40      9  54.0:          0          0          0          0
  HT40     10  81.0:          0          0          0          0
  HT40     11 108.0:         11        100          0         18
  HT40     12 162.0:         23        200          0         22
  HT40     13 216.0:         61        580          0         35
  HT40     14 243.0:         37        271          0         66
  HT40     15 270.0:         65        217          2         73
  HT40     15 300.0:          0          0          0          0

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 38 ++++++++++++++++++++++++++++------
 drivers/net/wireless/ath/ath9k/rc.h    |  4 ++++
 2 files changed, 36 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index b66f72dbf7b9..592f1b70f55a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -289,23 +289,49 @@ static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
 	if (sc->cur_rate_table == NULL)
 		return 0;
 
-	max = 80 + sc->cur_rate_table->rate_cnt * 64;
+	max = 80 + sc->cur_rate_table->rate_cnt * 1024;
 	buf = kmalloc(max + 1, GFP_KERNEL);
 	if (buf == NULL)
 		return 0;
 	buf[max] = 0;
 
-	len += sprintf(buf, "%5s %15s %8s %9s %3s\n\n", "Rate", "Success",
-		       "Retries", "XRetries", "PER");
+	len += sprintf(buf, "%6s %6s %6s "
+		       "%10s %10s %10s %10s\n",
+		       "HT", "MCS", "Rate",
+		       "Success", "Retries", "XRetries", "PER");
 
 	for (i = 0; i < sc->cur_rate_table->rate_cnt; i++) {
 		u32 ratekbps = sc->cur_rate_table->info[i].ratekbps;
 		struct ath_rc_stats *stats = &sc->debug.stats.rcstats[i];
+		char mcs[5];
+		char htmode[5];
+		int used_mcs = 0, used_htmode = 0;
+
+		if (WLAN_RC_PHY_HT(sc->cur_rate_table->info[i].phy)) {
+			used_mcs = snprintf(mcs, 5, "%d",
+				sc->cur_rate_table->info[i].ratecode);
+
+			if (WLAN_RC_PHY_40(sc->cur_rate_table->info[i].phy))
+				used_htmode = snprintf(htmode, 5, "HT40");
+			else if (WLAN_RC_PHY_20(sc->cur_rate_table->info[i].phy))
+				used_htmode = snprintf(htmode, 5, "HT20");
+			else
+				used_htmode = snprintf(htmode, 5, "????");
+		}
+
+		mcs[used_mcs] = '\0';
+		htmode[used_htmode] = '\0';
 
 		len += snprintf(buf + len, max - len,
-			"%3u.%d: %8u %8u %8u %8u\n", ratekbps / 1000,
-			(ratekbps % 1000) / 100, stats->success,
-			stats->retries, stats->xretries,
+			"%6s %6s %3u.%d: "
+			"%10u %10u %10u %10u\n",
+			htmode,
+			mcs,
+			ratekbps / 1000,
+			(ratekbps % 1000) / 100,
+			stats->success,
+			stats->retries,
+			stats->xretries,
 			stats->per);
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 9eb96f506998..4f6d6fd442f4 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -57,6 +57,10 @@ enum {
 				|| (_phy == WLAN_RC_PHY_HT_40_DS)	\
 				|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI)	\
 				|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_20(_phy)   ((_phy == WLAN_RC_PHY_HT_20_SS)		\
+				|| (_phy == WLAN_RC_PHY_HT_20_DS)	\
+				|| (_phy == WLAN_RC_PHY_HT_20_SS_HGI)	\
+				|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI))
 #define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)		\
 				|| (_phy == WLAN_RC_PHY_HT_40_DS)	\
 				|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI)	\
-- 
cgit v1.2.3


From 5b6e2f12edd6c46e87a2775321f1912d19be4b35 Mon Sep 17 00:00:00 2001
From: Stefan Seyfried <seife@sphairon.com>
Date: Tue, 8 Dec 2009 15:21:34 +0100
Subject: ar9170usb: add Sphairon Homelink 1202 USB ID

Signed-off-by: Stefan Seyfried <seife@sphairon.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/usb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index e0799d924057..0f361186b78f 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -84,6 +84,8 @@ static struct usb_device_id ar9170_usb_ids[] = {
 	{ USB_DEVICE(0x0cde, 0x0023) },
 	/* Z-Com UB82 ABG */
 	{ USB_DEVICE(0x0cde, 0x0026) },
+	/* Sphairon Homelink 1202 */
+	{ USB_DEVICE(0x0cde, 0x0027) },
 	/* Arcadyan WN7512 */
 	{ USB_DEVICE(0x083a, 0xf522) },
 	/* Planex GWUS300 */
-- 
cgit v1.2.3


From 11466f1342a3400dd5e03da3d8c45aa4149c62d4 Mon Sep 17 00:00:00 2001
From: Stefan Seyfried <seife@sphairon.com>
Date: Tue, 8 Dec 2009 15:21:35 +0100
Subject: zd1211rw: improve ejecting of fake CDROM

The zd1211rw always assumed that the storage device is at endpoint 1,
but there are devices (Spairon Homelink 1202) that are at endpoint 0.
Try both, starting with 1 to make sure to not break existing setups.

Signed-off-by: Stefan Seyfried <seife@sphairon.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1211rw/zd_usb.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ac19ecd19cfe..4daf1c94ec04 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1078,11 +1078,15 @@ static int eject_installer(struct usb_interface *intf)
 	int r;
 
 	/* Find bulk out endpoint */
-	endpoint = &iface_desc->endpoint[1].desc;
-	if (usb_endpoint_dir_out(endpoint) &&
-	    usb_endpoint_xfer_bulk(endpoint)) {
-		bulk_out_ep = endpoint->bEndpointAddress;
-	} else {
+	for (r = 1; r >= 0; r--) {
+		endpoint = &iface_desc->endpoint[r].desc;
+		if (usb_endpoint_dir_out(endpoint) &&
+		    usb_endpoint_xfer_bulk(endpoint)) {
+			bulk_out_ep = endpoint->bEndpointAddress;
+			break;
+		}
+	}
+	if (r == -1) {
 		dev_err(&udev->dev,
 			"zd1211rw: Could not find bulk out endpoint\n");
 		return -ENODEV;
-- 
cgit v1.2.3


From ba37a3d0395a66b3c9164c4f4d1318317da32e96 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 10 Dec 2009 14:37:27 -0800
Subject: iwlwifi: use new mac80211 SMPS

Instead of hard-coding the SM PS mode per hardware,
this makes iwlwifi support the new mac80211 API for
controlling the SM PS mode.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c |  1 -
 drivers/net/wireless/iwlwifi/iwl-4965.c |  1 -
 drivers/net/wireless/iwlwifi/iwl-5000.c |  4 ---
 drivers/net/wireless/iwlwifi/iwl-6000.c |  3 --
 drivers/net/wireless/iwlwifi/iwl-agn.c  |  5 ++++
 drivers/net/wireless/iwlwifi/iwl-core.c | 53 ++++++++++++++++-----------------
 drivers/net/wireless/iwlwifi/iwl-core.h |  2 --
 drivers/net/wireless/iwlwifi/iwl-dev.h  |  1 +
 8 files changed, 32 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 9d4fdd7a1134..5759f91343a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -174,7 +174,6 @@ struct iwl_cfg iwl1000_bgn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl1000_bg_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 386513b601f5..34778cf120fc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2239,7 +2239,6 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.broken_powersave = true,
 	.led_compensation = 61,
 	.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 /* Module firmware */
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 5a277cdffd07..3236315c75be 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1600,7 +1600,6 @@ struct iwl_cfg iwl5300_agn_cfg = {
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl5100_bgn_cfg = {
@@ -1669,7 +1668,6 @@ struct iwl_cfg iwl5100_agn_cfg = {
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -1693,7 +1691,6 @@ struct iwl_cfg iwl5350_agn_cfg = {
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl5150_agn_cfg = {
@@ -1717,7 +1714,6 @@ struct iwl_cfg iwl5150_agn_cfg = {
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl5150_abg_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index fec43771c49e..788457ae25a8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -307,7 +307,6 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl6000i_2abg_cfg = {
@@ -396,7 +395,6 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DYNAMIC,
 };
 
 struct iwl_cfg iwl6050_2abg_cfg = {
@@ -456,7 +454,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
-	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 0b3669f317a4..904b5d8da860 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2623,6 +2623,10 @@ static int iwl_setup_mac(struct iwl_priv *priv)
 		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
 			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
 
+	if (priv->cfg->sku & IWL_SKU_N)
+		hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
+			     IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+
 	hw->sta_data_size = sizeof(struct iwl_station_priv);
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
@@ -3361,6 +3365,7 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	priv->band = IEEE80211_BAND_2GHZ;
 
 	priv->iw_mode = NL80211_IFTYPE_STATION;
+	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
 
 	/* Choose which receivers/antennas to use */
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index c3c31dc9fd4d..e3b96b48b7fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -450,8 +450,6 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 	if (priv->cfg->ht_greenfield_support)
 		ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
 	ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
-	ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
-			     (priv->cfg->sm_ps_mode << 2));
 	max_bit_rate = MAX_BIT_RATE_20_MHZ;
 	if (priv->hw_params.ht40_channel & BIT(band)) {
 		ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
@@ -636,7 +634,7 @@ EXPORT_SYMBOL(iwlcore_rts_tx_cmd_flag);
 
 static bool is_single_rx_stream(struct iwl_priv *priv)
 {
-	return !priv->current_ht_config.is_ht ||
+	return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
 	       priv->current_ht_config.single_chain_sufficient;
 }
 
@@ -1003,28 +1001,18 @@ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
  */
 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
 {
-	int idle_cnt = active_cnt;
-	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
-
-	/* # Rx chains when idling and maybe trying to save power */
-	switch (priv->cfg->sm_ps_mode) {
-	case WLAN_HT_CAP_SM_PS_STATIC:
-		idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
-		break;
-	case WLAN_HT_CAP_SM_PS_DYNAMIC:
-		idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
-			IWL_NUM_IDLE_CHAINS_SINGLE;
-		break;
-	case WLAN_HT_CAP_SM_PS_DISABLED:
-		break;
-	case WLAN_HT_CAP_SM_PS_INVALID:
+	/* # Rx chains when idling, depending on SMPS mode */
+	switch (priv->current_ht_config.smps) {
+	case IEEE80211_SMPS_STATIC:
+	case IEEE80211_SMPS_DYNAMIC:
+		return IWL_NUM_IDLE_CHAINS_SINGLE;
+	case IEEE80211_SMPS_OFF:
+		return active_cnt;
 	default:
-		IWL_ERR(priv, "invalid sm_ps mode %u\n",
-			priv->cfg->sm_ps_mode);
-		WARN_ON(1);
-		break;
+		WARN(1, "invalid SMPS mode %d",
+		     priv->current_ht_config.smps);
+		return active_cnt;
 	}
-	return idle_cnt;
 }
 
 /* up to 4 chains */
@@ -2686,6 +2674,21 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
 	}
 
+	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+		       IEEE80211_CONF_CHANGE_CHANNEL)) {
+		/* mac80211 uses static for non-HT which is what we want */
+		priv->current_ht_config.smps = conf->smps_mode;
+
+		/*
+		 * Recalculate chain counts.
+		 *
+		 * If monitor mode is enabled then mac80211 will
+		 * set up the SM PS mode to OFF if an HT channel is
+		 * configured.
+		 */
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
+	}
 
 	/* during scanning mac80211 will delay channel setting until
 	 * scan finish with changed = 0
@@ -2782,10 +2785,6 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		iwl_set_tx_power(priv, conf->power_level, false);
 	}
 
-	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
 	if (!iwl_is_ready(priv)) {
 		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
 		goto out;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 650d3808d24a..f7acbb32900a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -232,7 +232,6 @@ struct iwl_mod_params {
  * @chain_noise_num_beacons: number of beacons used to compute chain noise
  * @adv_thermal_throttle: support advance thermal throttle
  * @support_ct_kill_exit: support ct kill exit condition
- * @sm_ps_mode: spatial multiplexing power save mode
  * @support_wimax_coexist: support wimax/wifi co-exist
  *
  * We enable the driver to be backward compatible wrt API version. The
@@ -289,7 +288,6 @@ struct iwl_cfg {
 	const bool supports_idle;
 	bool adv_thermal_throttle;
 	bool support_ct_kill_exit;
-	u8 sm_ps_mode;
 	const bool support_wimax_coexist;
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index b3a29c7cdbc0..1e12e7340c90 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -512,6 +512,7 @@ struct iwl_ht_config {
 	bool is_ht;
 	bool is_40mhz;
 	bool single_chain_sufficient;
+	enum ieee80211_smps_mode smps; /* current smps mode */
 	/* BSS related data */
 	u8 extension_chan_offset;
 	u8 ht_protection;
-- 
cgit v1.2.3


From 45d5d805988f1f3c0b24dac59fbba771b1f106a8 Mon Sep 17 00:00:00 2001
From: Emese Revfy <re.emese@gmail.com>
Date: Mon, 14 Dec 2009 00:59:53 +0100
Subject: iwlwifi: Constify struct iwl_ops

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945.c | 2 +-
 drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
 drivers/net/wireless/iwlwifi/iwl-5000.c | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-6000.c | 4 ++--
 5 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 5759f91343a5..0db1fda94a65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -141,7 +141,7 @@ static struct iwl_lib_ops iwl1000_lib = {
 	 },
 };
 
-static struct iwl_ops iwl1000_ops = {
+static const struct iwl_ops iwl1000_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl1000_lib,
 	.hcmd = &iwl5000_hcmd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 7da1dab933d9..3708b5c204e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2811,7 +2811,7 @@ static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
 	.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
 };
 
-static struct iwl_ops iwl3945_ops = {
+static const struct iwl_ops iwl3945_ops = {
 	.ucode = &iwl3945_ucode,
 	.lib = &iwl3945_lib,
 	.hcmd = &iwl3945_hcmd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 34778cf120fc..a5e3384d56b3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2208,7 +2208,7 @@ static struct iwl_lib_ops iwl4965_lib = {
 	},
 };
 
-static struct iwl_ops iwl4965_ops = {
+static const struct iwl_ops iwl4965_ops = {
 	.ucode = &iwl4965_ucode,
 	.lib = &iwl4965_lib,
 	.hcmd = &iwl4965_hcmd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 3236315c75be..f2b1915530e7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1556,7 +1556,7 @@ static struct iwl_lib_ops iwl5150_lib = {
 	 },
 };
 
-static struct iwl_ops iwl5000_ops = {
+static const struct iwl_ops iwl5000_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl5000_lib,
 	.hcmd = &iwl5000_hcmd,
@@ -1564,7 +1564,7 @@ static struct iwl_ops iwl5000_ops = {
 	.led = &iwlagn_led_ops,
 };
 
-static struct iwl_ops iwl5150_ops = {
+static const struct iwl_ops iwl5150_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl5150_lib,
 	.hcmd = &iwl5000_hcmd,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 788457ae25a8..a5a0ed4817a4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -253,7 +253,7 @@ static struct iwl_lib_ops iwl6000_lib = {
 	 },
 };
 
-static struct iwl_ops iwl6000_ops = {
+static const struct iwl_ops iwl6000_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl6000_lib,
 	.hcmd = &iwl5000_hcmd,
@@ -268,7 +268,7 @@ static struct iwl_hcmd_utils_ops iwl6050_hcmd_utils = {
 	.calc_rssi = iwl5000_calc_rssi,
 };
 
-static struct iwl_ops iwl6050_ops = {
+static const struct iwl_ops iwl6050_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl6000_lib,
 	.hcmd = &iwl5000_hcmd,
-- 
cgit v1.2.3


From 0ce024cbcd5837596bc82861f1d3074d53e956f6 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Mon, 14 Dec 2009 14:57:00 +0530
Subject: ath9k: Clarify Interrupt mitigation

ath9k currently supports only RX interrupt
mitigation.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 10 +++++-----
 drivers/net/wireless/ath/ath9k/hw.h |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 917f70f7a28e..9474f9f6d400 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -368,7 +368,7 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 		ah->config.spurchans[i][1] = AR_NO_SPUR;
 	}
 
-	ah->config.intr_mitigation = true;
+	ah->config.rx_intr_mitigation = true;
 
 	/*
 	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
@@ -1160,7 +1160,7 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
 		AR_IMR_RXORN |
 		AR_IMR_BCNMISC;
 
-	if (ah->config.intr_mitigation)
+	if (ah->config.rx_intr_mitigation)
 		ah->mask_reg |= AR_IMR_RXINTM | AR_IMR_RXMINTR;
 	else
 		ah->mask_reg |= AR_IMR_RXOK;
@@ -2091,7 +2091,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	REG_WRITE(ah, AR_OBS, 8);
 
-	if (ah->config.intr_mitigation) {
+	if (ah->config.rx_intr_mitigation) {
 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000);
 	}
@@ -2751,7 +2751,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 
 		*masked = isr & ATH9K_INT_COMMON;
 
-		if (ah->config.intr_mitigation) {
+		if (ah->config.rx_intr_mitigation) {
 			if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
 				*masked |= ATH9K_INT_RX;
 		}
@@ -2884,7 +2884,7 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
 	}
 	if (ints & ATH9K_INT_RX) {
 		mask |= AR_IMR_RXERR;
-		if (ah->config.intr_mitigation)
+		if (ah->config.rx_intr_mitigation)
 			mask |= AR_IMR_RXMINTR | AR_IMR_RXINTM;
 		else
 			mask |= AR_IMR_RXOK | AR_IMR_RXDESC;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index e2b0c73a616f..8849450dc591 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -212,7 +212,7 @@ struct ath9k_ops_config {
 	u32 cck_trig_low;
 	u32 enable_ani;
 	int serialize_regmode;
-	bool intr_mitigation;
+	bool rx_intr_mitigation;
 #define SPUR_DISABLE        	0
 #define SPUR_ENABLE_IOCTL   	1
 #define SPUR_ENABLE_EEPROM  	2
-- 
cgit v1.2.3


From 05c78d6d3ec5a8325398b3866e7e6bb88940d4fd Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Mon, 14 Dec 2009 14:57:04 +0530
Subject: ath9k: Remove ANI lock

Cancel/restart the ANI timer directly.
With this patch, the ANI lock can be removed.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 -
 drivers/net/wireless/ath/ath9k/main.c  | 19 ++++---------------
 2 files changed, 4 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e2cef2ff5d8f..9f1f523e02eb 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -453,7 +453,6 @@ struct ath_softc {
 	int irq;
 	spinlock_t sc_resetlock;
 	spinlock_t sc_serial_rw;
-	spinlock_t ani_lock;
 	spinlock_t sc_pm_lock;
 	struct mutex mutex;
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c48743452515..adb0edf2c8b0 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -363,14 +363,6 @@ static void ath_ani_calibrate(unsigned long data)
 	short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
 		ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
 
-	/*
-	* don't calibrate when we're scanning.
-	* we are most likely not on our home channel.
-	*/
-	spin_lock(&sc->ani_lock);
-	if (sc->sc_flags & SC_OP_SCANNING)
-		goto set_timer;
-
 	/* Only calibrate if awake */
 	if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
 		goto set_timer;
@@ -437,7 +429,6 @@ static void ath_ani_calibrate(unsigned long data)
 	ath9k_ps_restore(sc);
 
 set_timer:
-	spin_unlock(&sc->ani_lock);
 	/*
 	* Set timer interval based on previous results.
 	* The interval must be the shortest necessary to satisfy ANI,
@@ -1610,7 +1601,6 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	spin_lock_init(&sc->wiphy_lock);
 	spin_lock_init(&sc->sc_resetlock);
 	spin_lock_init(&sc->sc_serial_rw);
-	spin_lock_init(&sc->ani_lock);
 	spin_lock_init(&sc->sc_pm_lock);
 	mutex_init(&sc->mutex);
 	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
@@ -3113,6 +3103,7 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	mutex_lock(&sc->mutex);
 	if (ath9k_wiphy_scanning(sc)) {
@@ -3128,10 +3119,8 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 
 	aphy->state = ATH_WIPHY_SCAN;
 	ath9k_wiphy_pause_all_forced(sc, aphy);
-
-	spin_lock_bh(&sc->ani_lock);
 	sc->sc_flags |= SC_OP_SCANNING;
-	spin_unlock_bh(&sc->ani_lock);
+	del_timer_sync(&common->ani.timer);
 	mutex_unlock(&sc->mutex);
 }
 
@@ -3139,13 +3128,13 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	mutex_lock(&sc->mutex);
-	spin_lock_bh(&sc->ani_lock);
 	aphy->state = ATH_WIPHY_ACTIVE;
 	sc->sc_flags &= ~SC_OP_SCANNING;
 	sc->sc_flags |= SC_OP_FULL_RESET;
-	spin_unlock_bh(&sc->ani_lock);
+	ath_start_ani(common);
 	ath_beacon_config(sc, NULL);
 	mutex_unlock(&sc->mutex);
 }
-- 
cgit v1.2.3


From b6ce5c33001b1dc83e6a1a6f30c5dccccea651b6 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Mon, 14 Dec 2009 14:57:06 +0530
Subject: ath9k: Fix TX poll routine

Disable the TX hang monitoring routine when doing a scan.
Monitoring for a hung situation is not really necessary during
a scan run.

Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index adb0edf2c8b0..6401b3521049 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -3121,6 +3121,7 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 	ath9k_wiphy_pause_all_forced(sc, aphy);
 	sc->sc_flags |= SC_OP_SCANNING;
 	del_timer_sync(&common->ani.timer);
+	cancel_delayed_work_sync(&sc->tx_complete_work);
 	mutex_unlock(&sc->mutex);
 }
 
@@ -3135,6 +3136,7 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 	sc->sc_flags &= ~SC_OP_SCANNING;
 	sc->sc_flags |= SC_OP_FULL_RESET;
 	ath_start_ani(common);
+	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 	ath_beacon_config(sc, NULL);
 	mutex_unlock(&sc->mutex);
 }
-- 
cgit v1.2.3


From bc86fcbac0a86a93ee65cc31769c4e83e6ff2295 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 8 Dec 2009 20:40:54 +0000
Subject: netxen: minor suspend resume fixes

o pci device should be disable at the end and it should be enable first.
o Interface should be attached(netif_device_attach()) irrespective
  of its state.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_main.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 6cae26a5bd67..41cb0af4b556 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1448,14 +1448,14 @@ static int __netxen_nic_shutdown(struct pci_dev *pdev)
 		pci_enable_wake(pdev, PCI_D3hot, 1);
 	}
 
-	pci_disable_device(pdev);
-
 	return 0;
 }
 static void netxen_nic_shutdown(struct pci_dev *pdev)
 {
 	if (__netxen_nic_shutdown(pdev))
 		return;
+
+	pci_disable_device(pdev);
 }
 #ifdef CONFIG_PM
 static int
@@ -1468,6 +1468,8 @@ netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
 		return retval;
 
 	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	pci_disable_device(pdev);
 	return 0;
 }
 
@@ -1478,13 +1480,14 @@ netxen_nic_resume(struct pci_dev *pdev)
 	struct net_device *netdev = adapter->netdev;
 	int err;
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 
+	pci_set_power_state(pdev, PCI_D0);
+	pci_set_master(pdev);
+	pci_restore_state(pdev);
+
 	adapter->ahw.crb_win = -1;
 	adapter->ahw.ocm_win = -1;
 
@@ -1503,11 +1506,10 @@ netxen_nic_resume(struct pci_dev *pdev)
 		if (err)
 			goto err_out_detach;
 
-		netif_device_attach(netdev);
-
 		netxen_config_indev_addr(netdev, NETDEV_UP);
 	}
 
+	netif_device_attach(netdev);
 	netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
 	return 0;
 
-- 
cgit v1.2.3


From 6a808c6c02fb9f0ffa24ac7cca6cfc323cf98b21 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 8 Dec 2009 20:40:55 +0000
Subject: netxen: fix tx timeout recovery

o In case of tx timeout, firmare may be healthy, but some pci-func may
  see no response from it. Force firmware reset, if some pci-func
  explicitly requests so.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_init.c | 3 +++
 drivers/net/netxen/netxen_nic_main.c | 4 +++-
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 02f8d4b4db63..ba62411f3532 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -778,6 +778,9 @@ netxen_need_fw_reset(struct netxen_adapter *adapter)
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		return 1;
 
+	if (adapter->need_fw_reset)
+		return 1;
+
 	/* last attempt had failed */
 	if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
 		return 1;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 41cb0af4b556..1aca6260909a 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -2284,8 +2284,10 @@ netxen_check_health(struct netxen_adapter *adapter)
 	}
 
 	state = NXRD32(adapter, NX_CRB_DEV_STATE);
-	if (state == NX_DEV_NEED_RESET)
+	if (state == NX_DEV_NEED_RESET) {
+		adapter->need_fw_reset = 1;
 		goto detach;
+	}
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		return 0;
-- 
cgit v1.2.3


From e87ad5539343366e7c634c940a930157b6fa2aae Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 8 Dec 2009 20:40:56 +0000
Subject: netxen: support pci error handlers

o Support pci error detection and recovery.
o Refactor suspend and resume code, to share with io_error_detected,
  and slot_reset callbacks
o NX_NEED_AER device state added, to synchronize with firmware
  recovery.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_hdr.h  |   3 +-
 drivers/net/netxen/netxen_nic_main.c | 193 +++++++++++++++++++++++++++--------
 2 files changed, 150 insertions(+), 46 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index d138fc22927a..638369024908 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -969,7 +969,8 @@ enum {
 #define NX_DEV_READY		3
 #define NX_DEV_NEED_RESET	4
 #define NX_DEV_NEED_QUISCENT	5
-#define NX_DEV_FAILED		6
+#define NX_DEV_NEED_AER 	6
+#define NX_DEV_FAILED		7
 
 #define NX_RCODE_DRIVER_INFO		0x20000000
 #define NX_RCODE_DRIVER_CAN_RELOAD	0x40000000
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 1aca6260909a..f13a07f717c7 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -35,6 +35,7 @@
 #include <linux/ipv6.h>
 #include <linux/inetdevice.h>
 #include <linux/sysfs.h>
+#include <linux/aer.h>
 
 MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Converged Ethernet Driver");
 MODULE_LICENSE("GPL");
@@ -84,6 +85,7 @@ static void netxen_remove_sysfs_entries(struct netxen_adapter *adapter);
 static void netxen_create_diag_entries(struct netxen_adapter *adapter);
 static void netxen_remove_diag_entries(struct netxen_adapter *adapter);
 
+static int nx_dev_request_aer(struct netxen_adapter *adapter);
 static int nx_decr_dev_ref_cnt(struct netxen_adapter *adapter);
 static int netxen_can_start_firmware(struct netxen_adapter *adapter);
 
@@ -1262,6 +1264,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if ((err = pci_request_regions(pdev, netxen_nic_driver_name)))
 		goto err_out_disable_pdev;
 
+	if (NX_IS_REVISION_P3(pdev->revision))
+		pci_enable_pcie_error_reporting(pdev);
+
 	pci_set_master(pdev);
 
 	netdev = alloc_etherdev(sizeof(struct netxen_adapter));
@@ -1409,17 +1414,19 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	netxen_release_firmware(adapter);
 
+	if (NX_IS_REVISION_P3(pdev->revision))
+		pci_disable_pcie_error_reporting(pdev);
+
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 
 	free_netdev(netdev);
 }
-static int __netxen_nic_shutdown(struct pci_dev *pdev)
+
+static void netxen_nic_detach_func(struct netxen_adapter *adapter)
 {
-	struct netxen_adapter *adapter = pci_get_drvdata(pdev);
 	struct net_device *netdev = adapter->netdev;
-	int retval;
 
 	netif_device_detach(netdev);
 
@@ -1438,43 +1445,9 @@ static int __netxen_nic_shutdown(struct pci_dev *pdev)
 	nx_decr_dev_ref_cnt(adapter);
 
 	clear_bit(__NX_RESETTING, &adapter->state);
-
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
-
-	if (netxen_nic_wol_supported(adapter)) {
-		pci_enable_wake(pdev, PCI_D3cold, 1);
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-	}
-
-	return 0;
-}
-static void netxen_nic_shutdown(struct pci_dev *pdev)
-{
-	if (__netxen_nic_shutdown(pdev))
-		return;
-
-	pci_disable_device(pdev);
-}
-#ifdef CONFIG_PM
-static int
-netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	int retval;
-
-	retval = __netxen_nic_shutdown(pdev);
-	if (retval)
-		return retval;
-
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
-	pci_disable_device(pdev);
-	return 0;
 }
 
-static int
-netxen_nic_resume(struct pci_dev *pdev)
+static int netxen_nic_attach_func(struct pci_dev *pdev)
 {
 	struct netxen_adapter *adapter = pci_get_drvdata(pdev);
 	struct net_device *netdev = adapter->netdev;
@@ -1519,6 +1492,85 @@ err_out:
 	nx_decr_dev_ref_cnt(adapter);
 	return err;
 }
+
+static pci_ers_result_t netxen_io_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t state)
+{
+	struct netxen_adapter *adapter = pci_get_drvdata(pdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (nx_dev_request_aer(adapter))
+		return PCI_ERS_RESULT_RECOVERED;
+
+	netxen_nic_detach_func(adapter);
+
+	pci_disable_device(pdev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t netxen_io_slot_reset(struct pci_dev *pdev)
+{
+	int err = 0;
+
+	err = netxen_nic_attach_func(pdev);
+
+	return err ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
+}
+
+static void netxen_io_resume(struct pci_dev *pdev)
+{
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+}
+
+static void netxen_nic_shutdown(struct pci_dev *pdev)
+{
+	struct netxen_adapter *adapter = pci_get_drvdata(pdev);
+
+	netxen_nic_detach_func(adapter);
+
+	if (pci_save_state(pdev))
+		return;
+
+	if (netxen_nic_wol_supported(adapter)) {
+		pci_enable_wake(pdev, PCI_D3cold, 1);
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+	}
+
+	pci_disable_device(pdev);
+}
+
+#ifdef CONFIG_PM
+static int
+netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct netxen_adapter *adapter = pci_get_drvdata(pdev);
+	int retval;
+
+	netxen_nic_detach_func(adapter);
+
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+
+	if (netxen_nic_wol_supported(adapter)) {
+		pci_enable_wake(pdev, PCI_D3cold, 1);
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+	}
+
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int
+netxen_nic_resume(struct pci_dev *pdev)
+{
+	return netxen_nic_attach_func(pdev);
+}
 #endif
 
 static int netxen_nic_open(struct net_device *netdev)
@@ -2110,20 +2162,49 @@ nx_decr_dev_ref_cnt(struct netxen_adapter *adapter)
 	return count;
 }
 
-static void
+static int
+nx_dev_request_aer(struct netxen_adapter *adapter)
+{
+	u32 state;
+	int ret = -EINVAL;
+
+	if (netxen_api_lock(adapter))
+		return ret;
+
+	state = NXRD32(adapter, NX_CRB_DEV_STATE);
+
+	if (state == NX_DEV_NEED_AER)
+		ret = 0;
+	else if (state == NX_DEV_READY) {
+		NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_NEED_AER);
+		ret = 0;
+	}
+
+	netxen_api_unlock(adapter);
+	return ret;
+}
+
+static int
 nx_dev_request_reset(struct netxen_adapter *adapter)
 {
 	u32 state;
+	int ret = -EINVAL;
 
 	if (netxen_api_lock(adapter))
-		return;
+		return ret;
 
 	state = NXRD32(adapter, NX_CRB_DEV_STATE);
 
-	if (state != NX_DEV_INITALIZING)
+	if (state == NX_DEV_NEED_RESET)
+		ret = 0;
+	else if (state != NX_DEV_INITALIZING && state != NX_DEV_NEED_AER) {
 		NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_NEED_RESET);
+		ret = 0;
+	}
 
 	netxen_api_unlock(adapter);
+
+	return ret;
 }
 
 static int
@@ -2275,18 +2356,28 @@ netxen_check_health(struct netxen_adapter *adapter)
 	u32 state, heartbit;
 	struct net_device *netdev = adapter->netdev;
 
+	state = NXRD32(adapter, NX_CRB_DEV_STATE);
+	if (state == NX_DEV_NEED_AER)
+		return 0;
+
 	if (netxen_nic_check_temp(adapter))
 		goto detach;
 
 	if (adapter->need_fw_reset) {
-		nx_dev_request_reset(adapter);
+		if (nx_dev_request_reset(adapter))
+			return 0;
 		goto detach;
 	}
 
-	state = NXRD32(adapter, NX_CRB_DEV_STATE);
+	/* NX_DEV_NEED_RESET, this state can be marked in two cases
+	 * 1. Tx timeout 2. Fw hang
+	 * Send request to destroy context in case of tx timeout only
+	 * and doesn't required in case of Fw hang
+	 */
 	if (state == NX_DEV_NEED_RESET) {
 		adapter->need_fw_reset = 1;
-		goto detach;
+		if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+			goto detach;
 	}
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
@@ -2296,12 +2387,17 @@ netxen_check_health(struct netxen_adapter *adapter)
 	if (heartbit != adapter->heartbit) {
 		adapter->heartbit = heartbit;
 		adapter->fw_fail_cnt = 0;
+		if (adapter->need_fw_reset)
+			goto detach;
 		return 0;
 	}
 
 	if (++adapter->fw_fail_cnt < FW_FAIL_THRESH)
 		return 0;
 
+	if (nx_dev_request_reset(adapter))
+		return 0;
+
 	clear_bit(__NX_FW_ATTACHED, &adapter->state);
 
 	dev_info(&netdev->dev, "firmware hang detected\n");
@@ -2731,6 +2827,12 @@ netxen_config_indev_addr(struct net_device *dev, unsigned long event)
 { }
 #endif
 
+static struct pci_error_handlers netxen_err_handler = {
+	.error_detected = netxen_io_error_detected,
+	.slot_reset = netxen_io_slot_reset,
+	.resume = netxen_io_resume,
+};
+
 static struct pci_driver netxen_driver = {
 	.name = netxen_nic_driver_name,
 	.id_table = netxen_pci_tbl,
@@ -2740,7 +2842,8 @@ static struct pci_driver netxen_driver = {
 	.suspend = netxen_nic_suspend,
 	.resume = netxen_nic_resume,
 #endif
-	.shutdown = netxen_nic_shutdown
+	.shutdown = netxen_nic_shutdown,
+	.err_handler = &netxen_err_handler
 };
 
 static int __init netxen_init_module(void)
-- 
cgit v1.2.3


From 7ef8a2127a64d131c4dbe5b843e5708f6e75552b Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 8 Dec 2009 20:40:57 +0000
Subject: netxen: fix unified fw size check

o Unified firmware image size can be < 1 MB

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 76cd1f3e9fc8..c1223c92d566 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -420,7 +420,7 @@ struct status_desc {
 } __attribute__ ((aligned(16)));
 
 /* UNIFIED ROMIMAGE *************************/
-#define NX_UNI_FW_MIN_SIZE		0x3eb000
+#define NX_UNI_FW_MIN_SIZE		0xc8000
 #define NX_UNI_DIR_SECT_PRODUCT_TBL	0x0
 #define NX_UNI_DIR_SECT_BOOTLD		0x6
 #define NX_UNI_DIR_SECT_FW		0x7
-- 
cgit v1.2.3


From b3d18d191bb805f3effdfc083c4ce79789470b46 Mon Sep 17 00:00:00 2001
From: Scott Feldman <scofeldm@cisco.com>
Date: Wed, 23 Dec 2009 13:27:30 +0000
Subject: enic: Bug fix: use safe queue shutdown in dev->stop

Fix dev->stop shutdown bug where driver was stopping xmit queue and then
disabling intrs.  Fix is to disable intrs first and then stop the xmit
queue, otherwise an interrupt could cause the queue to be rewoken.  Also,
no need to explicitly do queue servicing because queues are cleaned and
reset back to initial state at end of dev->stop.  Servicing queues also
had the side-effect of also rewakening the xmit queue, which is not what
we want.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/enic/enic.h      |  2 +-
 drivers/net/enic/enic_main.c | 62 ++++++++++++++++++--------------------------
 drivers/net/enic/vnic_intr.h |  1 +
 3 files changed, 27 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index e1c2076228ba..8dd0105a8d9c 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -34,7 +34,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco 10G Ethernet Driver"
-#define DRV_VERSION		"1.1.0.100"
+#define DRV_VERSION		"1.1.0.241a"
 #define DRV_COPYRIGHT		"Copyright 2008-2009 Cisco Systems, Inc"
 #define PFX			DRV_NAME ": "
 
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index f875751af15e..b4a11befb3b3 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1084,34 +1084,6 @@ static int enic_rq_service(struct vnic_dev *vdev, struct cq_desc *cq_desc,
 	return 0;
 }
 
-static void enic_rq_drop_buf(struct vnic_rq *rq,
-	struct cq_desc *cq_desc, struct vnic_rq_buf *buf,
-	int skipped, void *opaque)
-{
-	struct enic *enic = vnic_dev_priv(rq->vdev);
-	struct sk_buff *skb = buf->os_buf;
-
-	if (skipped)
-		return;
-
-	pci_unmap_single(enic->pdev, buf->dma_addr,
-		buf->len, PCI_DMA_FROMDEVICE);
-
-	dev_kfree_skb_any(skb);
-}
-
-static int enic_rq_service_drop(struct vnic_dev *vdev, struct cq_desc *cq_desc,
-	u8 type, u16 q_number, u16 completed_index, void *opaque)
-{
-	struct enic *enic = vnic_dev_priv(vdev);
-
-	vnic_rq_service(&enic->rq[q_number], cq_desc,
-		completed_index, VNIC_RQ_RETURN_DESC,
-		enic_rq_drop_buf, opaque);
-
-	return 0;
-}
-
 static int enic_poll(struct napi_struct *napi, int budget)
 {
 	struct enic *enic = container_of(napi, struct enic, napi);
@@ -1304,6 +1276,24 @@ static int enic_request_intr(struct enic *enic)
 	return err;
 }
 
+static void enic_synchronize_irqs(struct enic *enic)
+{
+	unsigned int i;
+
+	switch (vnic_dev_get_intr_mode(enic->vdev)) {
+	case VNIC_DEV_INTR_MODE_INTX:
+	case VNIC_DEV_INTR_MODE_MSI:
+		synchronize_irq(enic->pdev->irq);
+		break;
+	case VNIC_DEV_INTR_MODE_MSIX:
+		for (i = 0; i < enic->intr_count; i++)
+			synchronize_irq(enic->msix_entry[i].vector);
+		break;
+	default:
+		break;
+	}
+}
+
 static int enic_notify_set(struct enic *enic)
 {
 	int err;
@@ -1409,16 +1399,19 @@ static int enic_stop(struct net_device *netdev)
 	unsigned int i;
 	int err;
 
+	for (i = 0; i < enic->intr_count; i++)
+		vnic_intr_mask(&enic->intr[i]);
+
+	enic_synchronize_irqs(enic);
+
 	del_timer_sync(&enic->notify_timer);
 
 	spin_lock(&enic->devcmd_lock);
 	vnic_dev_disable(enic->vdev);
 	spin_unlock(&enic->devcmd_lock);
 	napi_disable(&enic->napi);
-	netif_stop_queue(netdev);
-
-	for (i = 0; i < enic->intr_count; i++)
-		vnic_intr_mask(&enic->intr[i]);
+	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
 
 	for (i = 0; i < enic->wq_count; i++) {
 		err = vnic_wq_disable(&enic->wq[i]);
@@ -1436,11 +1429,6 @@ static int enic_stop(struct net_device *netdev)
 	spin_unlock(&enic->devcmd_lock);
 	enic_free_intr(enic);
 
-	(void)vnic_cq_service(&enic->cq[ENIC_CQ_RQ],
-		-1, enic_rq_service_drop, NULL);
-	(void)vnic_cq_service(&enic->cq[ENIC_CQ_WQ],
-		-1, enic_wq_service, NULL);
-
 	for (i = 0; i < enic->wq_count; i++)
 		vnic_wq_clean(&enic->wq[i], enic_free_wq_buf);
 	for (i = 0; i < enic->rq_count; i++)
diff --git a/drivers/net/enic/vnic_intr.h b/drivers/net/enic/vnic_intr.h
index 9a53604edce6..f79a722b6a03 100644
--- a/drivers/net/enic/vnic_intr.h
+++ b/drivers/net/enic/vnic_intr.h
@@ -61,6 +61,7 @@ static inline void vnic_intr_unmask(struct vnic_intr *intr)
 static inline void vnic_intr_mask(struct vnic_intr *intr)
 {
 	iowrite32(1, &intr->ctrl->mask);
+	(void)ioread32(&intr->ctrl->mask);
 }
 
 static inline void vnic_intr_return_credits(struct vnic_intr *intr,
-- 
cgit v1.2.3


From 2d6ddced5c99cf79c06b9b6ec1366ab63b970ea9 Mon Sep 17 00:00:00 2001
From: Scott Feldman <scofeldm@cisco.com>
Date: Wed, 23 Dec 2009 13:27:38 +0000
Subject: enic: Bug fix: try harder to fill Rx ring on skb allocation failures

During dev->open(), make sure we get at least one skb on the Rx ring.
Otherwise abort the interface load.  Also, if we get skb allocation
failures in NAPI poll while trying to replenish the ring, try again
later so we don't end up starving out the Rx ring completely.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/enic/enic_main.c | 54 +++++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index b4a11befb3b3..452a6b747e3e 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1091,6 +1091,7 @@ static int enic_poll(struct napi_struct *napi, int budget)
 	unsigned int rq_work_to_do = budget;
 	unsigned int wq_work_to_do = -1; /* no limit */
 	unsigned int  work_done, rq_work_done, wq_work_done;
+	int err;
 
 	/* Service RQ (first) and WQ
 	 */
@@ -1114,16 +1115,19 @@ static int enic_poll(struct napi_struct *napi, int budget)
 			0 /* don't unmask intr */,
 			0 /* don't reset intr timer */);
 
-	if (rq_work_done > 0) {
+	err = vnic_rq_fill(&enic->rq[0], enic->rq_alloc_buf);
 
-		/* Replenish RQ
-		 */
+	/* Buffer allocation failed. Stay in polling
+	 * mode so we can try to fill the ring again.
+	 */
 
-		vnic_rq_fill(&enic->rq[0], enic->rq_alloc_buf);
+	if (err)
+		rq_work_done = rq_work_to_do;
 
-	} else {
+	if (rq_work_done < rq_work_to_do) {
 
-		/* If no work done, flush all LROs and exit polling
+		/* Some work done, but not enough to stay in polling,
+		 * flush all LROs and exit polling
 		 */
 
 		if (netdev->features & NETIF_F_LRO)
@@ -1142,6 +1146,7 @@ static int enic_poll_msix(struct napi_struct *napi, int budget)
 	struct net_device *netdev = enic->netdev;
 	unsigned int work_to_do = budget;
 	unsigned int work_done;
+	int err;
 
 	/* Service RQ
 	 */
@@ -1149,25 +1154,30 @@ static int enic_poll_msix(struct napi_struct *napi, int budget)
 	work_done = vnic_cq_service(&enic->cq[ENIC_CQ_RQ],
 		work_to_do, enic_rq_service, NULL);
 
-	if (work_done > 0) {
-
-		/* Replenish RQ
-		 */
-
-		vnic_rq_fill(&enic->rq[0], enic->rq_alloc_buf);
-
-		/* Return intr event credits for this polling
-		 * cycle.  An intr event is the completion of a
-		 * RQ packet.
-		 */
+	/* Return intr event credits for this polling
+	 * cycle.  An intr event is the completion of a
+	 * RQ packet.
+	 */
 
+	if (work_done > 0)
 		vnic_intr_return_credits(&enic->intr[ENIC_MSIX_RQ],
 			work_done,
 			0 /* don't unmask intr */,
 			0 /* don't reset intr timer */);
-	} else {
 
-		/* If no work done, flush all LROs and exit polling
+	err = vnic_rq_fill(&enic->rq[0], enic->rq_alloc_buf);
+
+	/* Buffer allocation failed. Stay in polling mode
+	 * so we can try to fill the ring again.
+	 */
+
+	if (err)
+		work_done = work_to_do;
+
+	if (work_done < work_to_do) {
+
+		/* Some work done, but not enough to stay in polling,
+		 * flush all LROs and exit polling
 		 */
 
 		if (netdev->features & NETIF_F_LRO)
@@ -1350,11 +1360,13 @@ static int enic_open(struct net_device *netdev)
 	}
 
 	for (i = 0; i < enic->rq_count; i++) {
-		err = vnic_rq_fill(&enic->rq[i], enic->rq_alloc_buf);
-		if (err) {
+		vnic_rq_fill(&enic->rq[i], enic->rq_alloc_buf);
+		/* Need at least one buffer on ring to get going */
+		if (vnic_rq_desc_used(&enic->rq[i]) == 0) {
 			printk(KERN_ERR PFX
 				"%s: Unable to alloc receive buffers.\n",
 				netdev->name);
+			err = -ENOMEM;
 			goto err_out_notify_unset;
 		}
 	}
-- 
cgit v1.2.3


From 9959a18556c73ebf2936b8df183ea7b41f38d933 Mon Sep 17 00:00:00 2001
From: Scott Feldman <scofeldm@cisco.com>
Date: Wed, 23 Dec 2009 13:27:43 +0000
Subject: enic: minimize pkt filter updates to firmware

In set_multicast(), only push pkt filter changes down to firmware if
pkt filter actually changes.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/enic/enic.h      | 1 +
 drivers/net/enic/enic_main.c | 8 ++++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 8dd0105a8d9c..b090d65ad0c8 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -89,6 +89,7 @@ struct enic {
 	spinlock_t devcmd_lock;
 	u8 mac_addr[ETH_ALEN];
 	u8 mc_addr[ENIC_MULTICAST_PERFECT_FILTERS][ETH_ALEN];
+	unsigned int flags;
 	unsigned int mc_count;
 	int csum_rx_enabled;
 	u32 port_mtu;
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 452a6b747e3e..019b1480cc0c 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -771,6 +771,7 @@ static void enic_set_multicast_list(struct net_device *netdev)
 	int promisc = (netdev->flags & IFF_PROMISC) ? 1 : 0;
 	int allmulti = (netdev->flags & IFF_ALLMULTI) ||
 	    (netdev->mc_count > ENIC_MULTICAST_PERFECT_FILTERS);
+	unsigned int flags = netdev->flags | (allmulti ? IFF_ALLMULTI : 0);
 	u8 mc_addr[ENIC_MULTICAST_PERFECT_FILTERS][ETH_ALEN];
 	unsigned int mc_count = netdev->mc_count;
 	unsigned int i, j;
@@ -780,8 +781,11 @@ static void enic_set_multicast_list(struct net_device *netdev)
 
 	spin_lock(&enic->devcmd_lock);
 
-	vnic_dev_packet_filter(enic->vdev, directed,
-		multicast, broadcast, promisc, allmulti);
+	if (enic->flags != flags) {
+		enic->flags = flags;
+		vnic_dev_packet_filter(enic->vdev, directed,
+			multicast, broadcast, promisc, allmulti);
+	}
 
 	/* Is there an easier way?  Trying to minimize to
 	 * calls to add/del multicast addrs.  We keep the
-- 
cgit v1.2.3


From bd2496229e702b2eb50eab5589858a3cdb7847b2 Mon Sep 17 00:00:00 2001
From: Scott Feldman <scofeldm@cisco.com>
Date: Wed, 23 Dec 2009 13:27:48 +0000
Subject: enic: Bug fix: align desc ring sizes to 32 descs

Previous driver was aligning ring sizes to 16 descs, but hardware actually
wants desc ring sizes to be aligned to 32 descs.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/enic/enic_res.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c
index 32111144efc9..a605da1475c6 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/enic/enic_res.c
@@ -74,13 +74,13 @@ int enic_get_vnic_config(struct enic *enic)
 		min_t(u32, ENIC_MAX_WQ_DESCS,
 		max_t(u32, ENIC_MIN_WQ_DESCS,
 		c->wq_desc_count));
-	c->wq_desc_count &= 0xfffffff0; /* must be aligned to groups of 16 */
+	c->wq_desc_count &= 0xffffffe0; /* must be aligned to groups of 32 */
 
 	c->rq_desc_count =
 		min_t(u32, ENIC_MAX_RQ_DESCS,
 		max_t(u32, ENIC_MIN_RQ_DESCS,
 		c->rq_desc_count));
-	c->rq_desc_count &= 0xfffffff0; /* must be aligned to groups of 16 */
+	c->rq_desc_count &= 0xffffffe0; /* must be aligned to groups of 32 */
 
 	if (c->mtu == 0)
 		c->mtu = 1500;
-- 
cgit v1.2.3


From 7c8445991172cc17eaca9f7de0a300c02caaa49d Mon Sep 17 00:00:00 2001
From: Scott Feldman <scofeldm@cisco.com>
Date: Wed, 23 Dec 2009 13:27:54 +0000
Subject: enic: feature add: add ethtool -c/C support

Only rx_usec and tx_usec options for ethtool -C are settable as those
are the only settings that make sense to HW.  Adds driver reporting of
intr coalescing timer value in usec units rather than HW units.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/enic/enic.h      |  2 ++
 drivers/net/enic/enic_main.c | 63 +++++++++++++++++++++++++++++++++++++++++++-
 drivers/net/enic/enic_res.c  | 12 +++++----
 drivers/net/enic/vnic_enet.h |  5 ++++
 drivers/net/enic/vnic_intr.c |  8 +++++-
 drivers/net/enic/vnic_intr.h |  2 ++
 6 files changed, 85 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index b090d65ad0c8..ee01f5a6d0d4 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -93,6 +93,8 @@ struct enic {
 	unsigned int mc_count;
 	int csum_rx_enabled;
 	u32 port_mtu;
+	u32 rx_coalesce_usecs;
+	u32 tx_coalesce_usecs;
 
 	/* work queue cache line section */
 	____cacheline_aligned struct vnic_wq wq[ENIC_WQ_MAX];
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 019b1480cc0c..e56f41672b37 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -261,6 +261,62 @@ static void enic_set_msglevel(struct net_device *netdev, u32 value)
 	enic->msg_enable = value;
 }
 
+static int enic_get_coalesce(struct net_device *netdev,
+	struct ethtool_coalesce *ecmd)
+{
+	struct enic *enic = netdev_priv(netdev);
+
+	ecmd->tx_coalesce_usecs = enic->tx_coalesce_usecs;
+	ecmd->rx_coalesce_usecs = enic->rx_coalesce_usecs;
+
+	return 0;
+}
+
+static int enic_set_coalesce(struct net_device *netdev,
+	struct ethtool_coalesce *ecmd)
+{
+	struct enic *enic = netdev_priv(netdev);
+	u32 tx_coalesce_usecs;
+	u32 rx_coalesce_usecs;
+
+	tx_coalesce_usecs = min_t(u32,
+		INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX),
+		ecmd->tx_coalesce_usecs);
+	rx_coalesce_usecs = min_t(u32,
+		INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX),
+		ecmd->rx_coalesce_usecs);
+
+	switch (vnic_dev_get_intr_mode(enic->vdev)) {
+	case VNIC_DEV_INTR_MODE_INTX:
+		if (tx_coalesce_usecs != rx_coalesce_usecs)
+			return -EINVAL;
+
+		vnic_intr_coalescing_timer_set(&enic->intr[ENIC_INTX_WQ_RQ],
+			INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs));
+		break;
+	case VNIC_DEV_INTR_MODE_MSI:
+		if (tx_coalesce_usecs != rx_coalesce_usecs)
+			return -EINVAL;
+
+		vnic_intr_coalescing_timer_set(&enic->intr[0],
+			INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs));
+		break;
+	case VNIC_DEV_INTR_MODE_MSIX:
+		vnic_intr_coalescing_timer_set(&enic->intr[ENIC_MSIX_WQ],
+			INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs));
+		vnic_intr_coalescing_timer_set(&enic->intr[ENIC_MSIX_RQ],
+			INTR_COALESCE_USEC_TO_HW(rx_coalesce_usecs));
+		break;
+	default:
+		break;
+	}
+
+	enic->tx_coalesce_usecs = tx_coalesce_usecs;
+	enic->rx_coalesce_usecs = rx_coalesce_usecs;
+
+	return 0;
+}
+
 static const struct ethtool_ops enic_ethtool_ops = {
 	.get_settings = enic_get_settings,
 	.get_drvinfo = enic_get_drvinfo,
@@ -278,6 +334,8 @@ static const struct ethtool_ops enic_ethtool_ops = {
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,
 	.set_tso = enic_set_tso,
+	.get_coalesce = enic_get_coalesce,
+	.set_coalesce = enic_set_coalesce,
 	.get_flags = ethtool_op_get_flags,
 	.set_flags = ethtool_op_set_flags,
 };
@@ -363,12 +421,12 @@ static void enic_mtu_check(struct enic *enic)
 	u32 mtu = vnic_dev_mtu(enic->vdev);
 
 	if (mtu && mtu != enic->port_mtu) {
+		enic->port_mtu = mtu;
 		if (mtu < enic->netdev->mtu)
 			printk(KERN_WARNING PFX
 				"%s: interface MTU (%d) set higher "
 				"than switch port MTU (%d)\n",
 				enic->netdev->name, enic->netdev->mtu, mtu);
-		enic->port_mtu = mtu;
 	}
 }
 
@@ -1990,6 +2048,9 @@ static int __devinit enic_probe(struct pci_dev *pdev,
 		goto err_out_dev_deinit;
 	}
 
+	enic->tx_coalesce_usecs = enic->config.intr_timer_usec;
+	enic->rx_coalesce_usecs = enic->tx_coalesce_usecs;
+
 	netdev->netdev_ops = &enic_netdev_ops;
 	netdev->watchdog_timeo = 2 * HZ;
 	netdev->ethtool_ops = &enic_ethtool_ops;
diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c
index a605da1475c6..02839bf0fe8b 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/enic/enic_res.c
@@ -66,9 +66,9 @@ int enic_get_vnic_config(struct enic *enic)
 	GET_CONFIG(wq_desc_count);
 	GET_CONFIG(rq_desc_count);
 	GET_CONFIG(mtu);
-	GET_CONFIG(intr_timer);
 	GET_CONFIG(intr_timer_type);
 	GET_CONFIG(intr_mode);
+	GET_CONFIG(intr_timer_usec);
 
 	c->wq_desc_count =
 		min_t(u32, ENIC_MAX_WQ_DESCS,
@@ -88,15 +88,17 @@ int enic_get_vnic_config(struct enic *enic)
 		max_t(u16, ENIC_MIN_MTU,
 		c->mtu));
 
-	c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer);
+	c->intr_timer_usec = min_t(u32,
+		INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX),
+		c->intr_timer_usec);
 
 	printk(KERN_INFO PFX "vNIC MAC addr %pM wq/rq %d/%d\n",
 		enic->mac_addr, c->wq_desc_count, c->rq_desc_count);
 	printk(KERN_INFO PFX "vNIC mtu %d csum tx/rx %d/%d tso/lro %d/%d "
-		"intr timer %d\n",
+		"intr timer %d usec\n",
 		c->mtu, ENIC_SETTING(enic, TXCSUM),
 		ENIC_SETTING(enic, RXCSUM), ENIC_SETTING(enic, TSO),
-		ENIC_SETTING(enic, LRO), c->intr_timer);
+		ENIC_SETTING(enic, LRO), c->intr_timer_usec);
 
 	return 0;
 }
@@ -303,7 +305,7 @@ void enic_init_vnic_resources(struct enic *enic)
 
 	for (i = 0; i < enic->intr_count; i++) {
 		vnic_intr_init(&enic->intr[i],
-			enic->config.intr_timer,
+			INTR_COALESCE_USEC_TO_HW(enic->config.intr_timer_usec),
 			enic->config.intr_timer_type,
 			mask_on_assertion);
 	}
diff --git a/drivers/net/enic/vnic_enet.h b/drivers/net/enic/vnic_enet.h
index 6332ac9391b8..8eeb6758491b 100644
--- a/drivers/net/enic/vnic_enet.h
+++ b/drivers/net/enic/vnic_enet.h
@@ -20,6 +20,10 @@
 #ifndef _VNIC_ENIC_H_
 #define _VNIC_ENIC_H_
 
+/* Hardware intr coalesce timer is in units of 1.5us */
+#define INTR_COALESCE_USEC_TO_HW(usec) ((usec) * 2/3)
+#define INTR_COALESCE_HW_TO_USEC(usec) ((usec) * 3/2)
+
 /* Device-specific region: enet configuration */
 struct vnic_enet_config {
 	u32 flags;
@@ -30,6 +34,7 @@ struct vnic_enet_config {
 	u8 intr_timer_type;
 	u8 intr_mode;
 	char devname[16];
+	u32 intr_timer_usec;
 };
 
 #define VENETF_TSO		0x1	/* TSO enabled */
diff --git a/drivers/net/enic/vnic_intr.c b/drivers/net/enic/vnic_intr.c
index 1f8786d7195e..3934309a9498 100644
--- a/drivers/net/enic/vnic_intr.c
+++ b/drivers/net/enic/vnic_intr.c
@@ -50,12 +50,18 @@ int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
 void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
 	unsigned int coalescing_type, unsigned int mask_on_assertion)
 {
-	iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer);
+	vnic_intr_coalescing_timer_set(intr, coalescing_timer);
 	iowrite32(coalescing_type, &intr->ctrl->coalescing_type);
 	iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion);
 	iowrite32(0, &intr->ctrl->int_credits);
 }
 
+void vnic_intr_coalescing_timer_set(struct vnic_intr *intr,
+	unsigned int coalescing_timer)
+{
+	iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer);
+}
+
 void vnic_intr_clean(struct vnic_intr *intr)
 {
 	iowrite32(0, &intr->ctrl->int_credits);
diff --git a/drivers/net/enic/vnic_intr.h b/drivers/net/enic/vnic_intr.h
index f79a722b6a03..2fe6c6339e3c 100644
--- a/drivers/net/enic/vnic_intr.h
+++ b/drivers/net/enic/vnic_intr.h
@@ -102,6 +102,8 @@ int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
 	unsigned int index);
 void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
 	unsigned int coalescing_type, unsigned int mask_on_assertion);
+void vnic_intr_coalescing_timer_set(struct vnic_intr *intr,
+	unsigned int coalescing_timer);
 void vnic_intr_clean(struct vnic_intr *intr);
 
 #endif /* _VNIC_INTR_H_ */
-- 
cgit v1.2.3


From d87fd25d5ac4cd044e21b749a8f6cac90f093c71 Mon Sep 17 00:00:00 2001
From: Scott Feldman <scofeldm@cisco.com>
Date: Wed, 23 Dec 2009 13:27:59 +0000
Subject: enic: whitespace cleanup; #define cleanup; more verbose err msg

Some misc changes to cleanup whitespace issues and fix/remove some #define
HW defintions.

1) fix some whitespace issues
2) more verbose err msg when resources aren't available to configure vnic
3) remove unused #define
4) fix RSS #define rss hash types

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/enic/enic_main.c |  5 +++--
 drivers/net/enic/vnic_dev.c  |  1 -
 drivers/net/enic/vnic_nic.h  | 12 ++++++------
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index e56f41672b37..d87935ad1130 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -731,7 +731,7 @@ static inline void enic_queue_wq_skb(struct enic *enic,
 
 /* netif_tx_lock held, process context with BHs disabled, or BH */
 static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
-					      struct net_device *netdev)
+	struct net_device *netdev)
 {
 	struct enic *enic = netdev_priv(netdev);
 	struct vnic_wq *wq = &enic->wq[0];
@@ -1824,7 +1824,8 @@ int enic_dev_init(struct enic *enic)
 	err = enic_set_intr_mode(enic);
 	if (err) {
 		printk(KERN_ERR PFX
-			"Failed to set intr mode, aborting.\n");
+			"Failed to set intr mode based on resource "
+			"counts and system capabilities, aborting.\n");
 		return err;
 	}
 
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index 29a48e8b59d3..69b9b70c7da0 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -36,7 +36,6 @@ struct vnic_res {
 };
 
 #define VNIC_DEV_CAP_INIT	0x0001
-#define VNIC_DEV_CAP_PERBI	0x0002
 
 struct vnic_dev {
 	void *priv;
diff --git a/drivers/net/enic/vnic_nic.h b/drivers/net/enic/vnic_nic.h
index eeaf329945d8..cf80ab46d582 100644
--- a/drivers/net/enic/vnic_nic.h
+++ b/drivers/net/enic/vnic_nic.h
@@ -41,12 +41,12 @@
 #define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD	1UL
 #define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT		24
 
-#define NIC_CFG_RSS_HASH_TYPE_IPV4		(1 << 0)
-#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV4		(1 << 1)
-#define NIC_CFG_RSS_HASH_TYPE_IPV6		(1 << 2)
-#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV6		(1 << 3)
-#define NIC_CFG_RSS_HASH_TYPE_IPV6_EX		(1 << 4)
-#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV6_EX	(1 << 5)
+#define NIC_CFG_RSS_HASH_TYPE_IPV4		(1 << 1)
+#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV4		(1 << 2)
+#define NIC_CFG_RSS_HASH_TYPE_IPV6		(1 << 3)
+#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV6		(1 << 4)
+#define NIC_CFG_RSS_HASH_TYPE_IPV6_EX		(1 << 5)
+#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV6_EX	(1 << 6)
 
 static inline void vnic_set_nic_cfg(u32 *nic_cfg,
 	u8 rss_default_cpu, u8 rss_hash_type,
-- 
cgit v1.2.3


From bf9ae5386bca8836c16e69ab8fdbe46767d7452a Mon Sep 17 00:00:00 2001
From: Octavian Purdila <opurdila@ixiacom.com>
Date: Sat, 26 Dec 2009 11:50:59 +0000
Subject: llc: use dev_hard_header

Using dev_hard_header allows us to use LLC with VLANs and potentially
other Ethernet/TokernRing specific encapsulations. It also removes code
duplication between LLC and Ethernet/TokenRing core code.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/myri_sbus.c |  6 +++---
 net/8021q/vlan_dev.c    |  7 +++----
 net/ethernet/eth.c      |  6 +++---
 net/llc/llc_output.c    | 45 ++++++++-------------------------------------
 4 files changed, 17 insertions(+), 47 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index b3513ad3b703..8b4313085359 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -716,10 +716,10 @@ static int myri_header(struct sk_buff *skb, struct net_device *dev,
 	pad[0] = MYRI_PAD_LEN;
 	pad[1] = 0xab;
 
-	/* Set the protocol type. For a packet of type ETH_P_802_3 we put the length
-	 * in here instead. It is up to the 802.2 layer to carry protocol information.
+	/* Set the protocol type. For a packet of type ETH_P_802_3/2 we put the
+	 * length in here instead.
 	 */
-	if (type != ETH_P_802_3)
+	if (type != ETH_P_802_3 && type != ETH_P_802_2)
 		eth->h_proto = htons(type);
 	else
 		eth->h_proto = htons(len);
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b7889782047e..77a49ffdd0ef 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -263,11 +263,10 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 		vhdr->h_vlan_TCI = htons(vlan_tci);
 
 		/*
-		 *  Set the protocol type. For a packet of type ETH_P_802_3 we
-		 *  put the length in here instead. It is up to the 802.2
-		 *  layer to carry protocol information.
+		 *  Set the protocol type. For a packet of type ETH_P_802_3/2 we
+		 *  put the length in here instead.
 		 */
-		if (type != ETH_P_802_3)
+		if (type != ETH_P_802_3 && type != ETH_P_802_2)
 			vhdr->h_vlan_encapsulated_proto = htons(type);
 		else
 			vhdr->h_vlan_encapsulated_proto = htons(len);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index dd3db88f8f0a..205a1c12f3c0 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -73,8 +73,8 @@ __setup("ether=", netdev_boot_setup);
  * @len:   packet length (<= skb->len)
  *
  *
- * Set the protocol type. For a packet of type ETH_P_802_3 we put the length
- * in here instead. It is up to the 802.2 layer to carry protocol information.
+ * Set the protocol type. For a packet of type ETH_P_802_3/2 we put the length
+ * in here instead.
  */
 int eth_header(struct sk_buff *skb, struct net_device *dev,
 	       unsigned short type,
@@ -82,7 +82,7 @@ int eth_header(struct sk_buff *skb, struct net_device *dev,
 {
 	struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN);
 
-	if (type != ETH_P_802_3)
+	if (type != ETH_P_802_3 && type != ETH_P_802_2)
 		eth->h_proto = htons(type);
 	else
 		eth->h_proto = htons(len);
diff --git a/net/llc/llc_output.c b/net/llc/llc_output.c
index 754f4fedc852..b38a1079a98e 100644
--- a/net/llc/llc_output.c
+++ b/net/llc/llc_output.c
@@ -33,48 +33,19 @@
 int llc_mac_hdr_init(struct sk_buff *skb,
 		     const unsigned char *sa, const unsigned char *da)
 {
-	int rc = 0;
+	int rc = -EINVAL;
 
 	switch (skb->dev->type) {
-#ifdef CONFIG_TR
-	case ARPHRD_IEEE802_TR: {
-		struct net_device *dev = skb->dev;
-		struct trh_hdr *trh;
-
-		skb_push(skb, sizeof(*trh));
-		skb_reset_mac_header(skb);
-		trh = tr_hdr(skb);
-		trh->ac = AC;
-		trh->fc = LLC_FRAME;
-		if (sa)
-			memcpy(trh->saddr, sa, dev->addr_len);
-		else
-			memset(trh->saddr, 0, dev->addr_len);
-		if (da) {
-			memcpy(trh->daddr, da, dev->addr_len);
-			tr_source_route(skb, trh, dev);
-			skb_reset_mac_header(skb);
-		}
-		break;
-	}
-#endif
+	case ARPHRD_IEEE802_TR:
 	case ARPHRD_ETHER:
-	case ARPHRD_LOOPBACK: {
-		unsigned short len = skb->len;
-		struct ethhdr *eth;
-
-		skb_push(skb, sizeof(*eth));
-		skb_reset_mac_header(skb);
-		eth = eth_hdr(skb);
-		eth->h_proto = htons(len);
-		memcpy(eth->h_dest, da, ETH_ALEN);
-		memcpy(eth->h_source, sa, ETH_ALEN);
+	case ARPHRD_LOOPBACK:
+		rc = dev_hard_header(skb, skb->dev, ETH_P_802_2, da, sa,
+				     skb->len);
+		if (rc > 0)
+			rc = 0;
 		break;
-	}
 	default:
-		printk(KERN_WARNING "device type not supported: %d\n",
-		       skb->dev->type);
-		rc = -EINVAL;
+		WARN(1, "device type not supported: %d\n", skb->dev->type);
 	}
 	return rc;
 }
-- 
cgit v1.2.3


From 55489b6ed6801a42636fc3d4594b77dda9c409f2 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:31:33 +0100
Subject: mwl8k: firmware command code cleanup

Sort firmware commands by command code, get rid of the 802_11 substring
in all command names, and make sure that the command functions match the
firmware command names.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 647 +++++++++++++++++++++----------------------
 1 file changed, 323 insertions(+), 324 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 59d49159cf2a..b543defdde8a 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -221,7 +221,7 @@ struct mwl8k_vif {
 	u8	bssid[ETH_ALEN];
 	u8	mac_addr[ETH_ALEN];
 
-	 /* Index into station database.Returned by update_sta_db call */
+	/* Index into station database. Returned by UPDATE_STADB.  */
 	u8	peer_id;
 
 	/* Non AMPDU sequence number assigned by driver */
@@ -1897,9 +1897,9 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, int allmulti,
 }
 
 /*
- * CMD_802_11_GET_STAT.
+ * CMD_GET_STAT.
  */
-struct mwl8k_cmd_802_11_get_stat {
+struct mwl8k_cmd_get_stat {
 	struct mwl8k_cmd_pkt header;
 	__le32 stats[64];
 } __attribute__((packed));
@@ -1909,10 +1909,10 @@ struct mwl8k_cmd_802_11_get_stat {
 #define MWL8K_STAT_FCS_ERROR	24
 #define MWL8K_STAT_RTS_SUCCESS	11
 
-static int mwl8k_cmd_802_11_get_stat(struct ieee80211_hw *hw,
-				struct ieee80211_low_level_stats *stats)
+static int mwl8k_cmd_get_stat(struct ieee80211_hw *hw,
+			      struct ieee80211_low_level_stats *stats)
 {
-	struct mwl8k_cmd_802_11_get_stat *cmd;
+	struct mwl8k_cmd_get_stat *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -1939,9 +1939,9 @@ static int mwl8k_cmd_802_11_get_stat(struct ieee80211_hw *hw,
 }
 
 /*
- * CMD_802_11_RADIO_CONTROL.
+ * CMD_RADIO_CONTROL.
  */
-struct mwl8k_cmd_802_11_radio_control {
+struct mwl8k_cmd_radio_control {
 	struct mwl8k_cmd_pkt header;
 	__le16 action;
 	__le16 control;
@@ -1949,10 +1949,10 @@ struct mwl8k_cmd_802_11_radio_control {
 } __attribute__((packed));
 
 static int
-mwl8k_cmd_802_11_radio_control(struct ieee80211_hw *hw, bool enable, bool force)
+mwl8k_cmd_radio_control(struct ieee80211_hw *hw, bool enable, bool force)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_802_11_radio_control *cmd;
+	struct mwl8k_cmd_radio_control *cmd;
 	int rc;
 
 	if (enable == priv->radio_on && !force)
@@ -1977,14 +1977,14 @@ mwl8k_cmd_802_11_radio_control(struct ieee80211_hw *hw, bool enable, bool force)
 	return rc;
 }
 
-static int mwl8k_cmd_802_11_radio_disable(struct ieee80211_hw *hw)
+static int mwl8k_cmd_radio_disable(struct ieee80211_hw *hw)
 {
-	return mwl8k_cmd_802_11_radio_control(hw, 0, 0);
+	return mwl8k_cmd_radio_control(hw, 0, 0);
 }
 
-static int mwl8k_cmd_802_11_radio_enable(struct ieee80211_hw *hw)
+static int mwl8k_cmd_radio_enable(struct ieee80211_hw *hw)
 {
-	return mwl8k_cmd_802_11_radio_control(hw, 1, 0);
+	return mwl8k_cmd_radio_control(hw, 1, 0);
 }
 
 static int
@@ -1998,15 +1998,15 @@ mwl8k_set_radio_preamble(struct ieee80211_hw *hw, bool short_preamble)
 
 	priv->radio_short_preamble = short_preamble;
 
-	return mwl8k_cmd_802_11_radio_control(hw, 1, 1);
+	return mwl8k_cmd_radio_control(hw, 1, 1);
 }
 
 /*
- * CMD_802_11_RF_TX_POWER.
+ * CMD_RF_TX_POWER.
  */
 #define MWL8K_TX_POWER_LEVEL_TOTAL	8
 
-struct mwl8k_cmd_802_11_rf_tx_power {
+struct mwl8k_cmd_rf_tx_power {
 	struct mwl8k_cmd_pkt header;
 	__le16 action;
 	__le16 support_level;
@@ -2015,9 +2015,9 @@ struct mwl8k_cmd_802_11_rf_tx_power {
 	__le16 power_level_list[MWL8K_TX_POWER_LEVEL_TOTAL];
 } __attribute__((packed));
 
-static int mwl8k_cmd_802_11_rf_tx_power(struct ieee80211_hw *hw, int dBm)
+static int mwl8k_cmd_rf_tx_power(struct ieee80211_hw *hw, int dBm)
 {
-	struct mwl8k_cmd_802_11_rf_tx_power *cmd;
+	struct mwl8k_cmd_rf_tx_power *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2159,85 +2159,61 @@ static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw,
 }
 
 /*
- * CMD_SET_SLOT.
+ * CMD_SET_AID.
  */
-struct mwl8k_cmd_set_slot {
-	struct mwl8k_cmd_pkt header;
-	__le16 action;
-	__u8 short_slot;
-} __attribute__((packed));
-
-static int mwl8k_cmd_set_slot(struct ieee80211_hw *hw, bool short_slot_time)
-{
-	struct mwl8k_cmd_set_slot *cmd;
-	int rc;
-
-	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
-	if (cmd == NULL)
-		return -ENOMEM;
-
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_SLOT);
-	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(MWL8K_CMD_SET);
-	cmd->short_slot = short_slot_time;
-
-	rc = mwl8k_post_cmd(hw, &cmd->header);
-	kfree(cmd);
+#define MWL8K_FRAME_PROT_DISABLED			0x00
+#define MWL8K_FRAME_PROT_11G				0x07
+#define MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY		0x02
+#define MWL8K_FRAME_PROT_11N_HT_ALL			0x06
 
-	return rc;
-}
+struct mwl8k_cmd_update_set_aid {
+	struct	mwl8k_cmd_pkt header;
+	__le16	aid;
 
-/*
- * CMD_MIMO_CONFIG.
- */
-struct mwl8k_cmd_mimo_config {
-	struct mwl8k_cmd_pkt header;
-	__le32 action;
-	__u8 rx_antenna_map;
-	__u8 tx_antenna_map;
+	 /* AP's MAC address (BSSID) */
+	__u8	bssid[ETH_ALEN];
+	__le16	protection_mode;
+	__u8	supp_rates[14];
 } __attribute__((packed));
 
-static int mwl8k_cmd_mimo_config(struct ieee80211_hw *hw, __u8 rx, __u8 tx)
+static int
+mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	struct mwl8k_cmd_mimo_config *cmd;
+	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
+	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
+	struct mwl8k_cmd_update_set_aid *cmd;
+	u16 prot_mode;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_MIMO_CONFIG);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_AID);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le32((u32)MWL8K_CMD_SET);
-	cmd->rx_antenna_map = rx;
-	cmd->tx_antenna_map = tx;
-
-	rc = mwl8k_post_cmd(hw, &cmd->header);
-	kfree(cmd);
-
-	return rc;
-}
-
-/*
- * CMD_ENABLE_SNIFFER.
- */
-struct mwl8k_cmd_enable_sniffer {
-	struct mwl8k_cmd_pkt header;
-	__le32 action;
-} __attribute__((packed));
+	cmd->aid = cpu_to_le16(info->aid);
 
-static int mwl8k_enable_sniffer(struct ieee80211_hw *hw, bool enable)
-{
-	struct mwl8k_cmd_enable_sniffer *cmd;
-	int rc;
+	memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
 
-	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
-	if (cmd == NULL)
-		return -ENOMEM;
+	if (info->use_cts_prot) {
+		prot_mode = MWL8K_FRAME_PROT_11G;
+	} else {
+		switch (info->ht_operation_mode &
+			IEEE80211_HT_OP_MODE_PROTECTION) {
+		case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
+			prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
+			break;
+		case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
+			prot_mode = MWL8K_FRAME_PROT_11N_HT_ALL;
+			break;
+		default:
+			prot_mode = MWL8K_FRAME_PROT_DISABLED;
+			break;
+		}
+	}
+	cmd->protection_mode = cpu_to_le16(prot_mode);
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_ENABLE_SNIFFER);
-	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le32(!!enable);
+	memcpy(cmd->supp_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2246,37 +2222,30 @@ static int mwl8k_enable_sniffer(struct ieee80211_hw *hw, bool enable)
 }
 
 /*
- * CMD_SET_MAC_ADDR.
+ * CMD_SET_RATE.
  */
-struct mwl8k_cmd_set_mac_addr {
-	struct mwl8k_cmd_pkt header;
-	union {
-		struct {
-			__le16 mac_type;
-			__u8 mac_addr[ETH_ALEN];
-		} mbss;
-		__u8 mac_addr[ETH_ALEN];
-	};
+struct mwl8k_cmd_set_rate {
+	struct	mwl8k_cmd_pkt header;
+	__u8	legacy_rates[14];
+
+	/* Bitmap for supported MCS codes.  */
+	__u8	mcs_set[16];
+	__u8	reserved[16];
 } __attribute__((packed));
 
-static int mwl8k_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
+static int
+mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_set_mac_addr *cmd;
+	struct mwl8k_cmd_set_rate *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	if (priv->ap_fw) {
-		cmd->mbss.mac_type = 0;
-		memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
-	} else {
-		memcpy(cmd->mac_addr, mac, ETH_ALEN);
-	}
+	memcpy(cmd->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2284,29 +2253,40 @@ static int mwl8k_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
 	return rc;
 }
 
-
 /*
- * CMD_SET_RATEADAPT_MODE.
+ * CMD_FINALIZE_JOIN.
  */
-struct mwl8k_cmd_set_rate_adapt_mode {
+#define MWL8K_FJ_BEACON_MAXLEN	128
+
+struct mwl8k_cmd_finalize_join {
 	struct mwl8k_cmd_pkt header;
-	__le16 action;
-	__le16 mode;
+	__le32 sleep_interval;	/* Number of beacon periods to sleep */
+	__u8 beacon_data[MWL8K_FJ_BEACON_MAXLEN];
 } __attribute__((packed));
 
-static int mwl8k_cmd_setrateadaptmode(struct ieee80211_hw *hw, __u16 mode)
+static int mwl8k_cmd_finalize_join(struct ieee80211_hw *hw, void *frame,
+				   int framelen, int dtim)
 {
-	struct mwl8k_cmd_set_rate_adapt_mode *cmd;
+	struct mwl8k_cmd_finalize_join *cmd;
+	struct ieee80211_mgmt *payload = frame;
+	int payload_len;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATEADAPT_MODE);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_FINALIZE_JOIN);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(MWL8K_CMD_SET);
-	cmd->mode = cpu_to_le16(mode);
+	cmd->sleep_interval = cpu_to_le32(dtim ? dtim : 1);
+
+	payload_len = framelen - ieee80211_hdrlen(payload->frame_control);
+	if (payload_len < 0)
+		payload_len = 0;
+	else if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
+		payload_len = MWL8K_FJ_BEACON_MAXLEN;
+
+	memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2315,59 +2295,57 @@ static int mwl8k_cmd_setrateadaptmode(struct ieee80211_hw *hw, __u16 mode)
 }
 
 /*
- * CMD_SET_WMM_MODE.
+ * CMD_SET_RTS_THRESHOLD.
  */
-struct mwl8k_cmd_set_wmm {
+struct mwl8k_cmd_set_rts_threshold {
 	struct mwl8k_cmd_pkt header;
 	__le16 action;
+	__le16 threshold;
 } __attribute__((packed));
 
-static int mwl8k_set_wmm(struct ieee80211_hw *hw, bool enable)
+static int mwl8k_cmd_set_rts_threshold(struct ieee80211_hw *hw,
+				       u16 action, u16 threshold)
 {
-	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_set_wmm *cmd;
+	struct mwl8k_cmd_set_rts_threshold *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_WMM_MODE);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_RTS_THRESHOLD);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(!!enable);
+	cmd->action = cpu_to_le16(action);
+	cmd->threshold = cpu_to_le16(threshold);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
 
-	if (!rc)
-		priv->wmm_enabled = enable;
-
 	return rc;
 }
 
 /*
- * CMD_SET_RTS_THRESHOLD.
+ * CMD_SET_SLOT.
  */
-struct mwl8k_cmd_rts_threshold {
+struct mwl8k_cmd_set_slot {
 	struct mwl8k_cmd_pkt header;
 	__le16 action;
-	__le16 threshold;
+	__u8 short_slot;
 } __attribute__((packed));
 
-static int mwl8k_rts_threshold(struct ieee80211_hw *hw,
-			       u16 action, u16 threshold)
+static int mwl8k_cmd_set_slot(struct ieee80211_hw *hw, bool short_slot_time)
 {
-	struct mwl8k_cmd_rts_threshold *cmd;
+	struct mwl8k_cmd_set_slot *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_RTS_THRESHOLD);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_SLOT);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(action);
-	cmd->threshold = cpu_to_le16(threshold);
+	cmd->action = cpu_to_le16(MWL8K_CMD_SET);
+	cmd->short_slot = short_slot_time;
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2426,9 +2404,9 @@ struct mwl8k_cmd_set_edca_params {
 				 MWL8K_SET_EDCA_AIFS)
 
 static int
-mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
-		__u16 cw_min, __u16 cw_max,
-		__u8 aifs, __u16 txop)
+mwl8k_cmd_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
+			  __u16 cw_min, __u16 cw_max,
+			  __u8 aifs, __u16 txop)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_set_edca_params *cmd;
@@ -2467,202 +2445,60 @@ mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
 }
 
 /*
- * CMD_FINALIZE_JOIN.
+ * CMD_SET_WMM_MODE.
  */
-#define MWL8K_FJ_BEACON_MAXLEN	128
-
-struct mwl8k_cmd_finalize_join {
+struct mwl8k_cmd_set_wmm_mode {
 	struct mwl8k_cmd_pkt header;
-	__le32 sleep_interval;	/* Number of beacon periods to sleep */
-	__u8 beacon_data[MWL8K_FJ_BEACON_MAXLEN];
+	__le16 action;
 } __attribute__((packed));
 
-static int mwl8k_finalize_join(struct ieee80211_hw *hw, void *frame,
-			       int framelen, int dtim)
+static int mwl8k_cmd_set_wmm_mode(struct ieee80211_hw *hw, bool enable)
 {
-	struct mwl8k_cmd_finalize_join *cmd;
-	struct ieee80211_mgmt *payload = frame;
-	int payload_len;
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_set_wmm_mode *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_FINALIZE_JOIN);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_WMM_MODE);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->sleep_interval = cpu_to_le32(dtim ? dtim : 1);
-
-	payload_len = framelen - ieee80211_hdrlen(payload->frame_control);
-	if (payload_len < 0)
-		payload_len = 0;
-	else if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
-		payload_len = MWL8K_FJ_BEACON_MAXLEN;
-
-	memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
+	cmd->action = cpu_to_le16(!!enable);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
 
-	return rc;
-}
-
-/*
- * CMD_UPDATE_STADB.
- */
-struct mwl8k_cmd_update_sta_db {
-	struct mwl8k_cmd_pkt header;
-
-	/* See STADB_ACTION_TYPE */
-	__le32	action;
-
-	/* Peer MAC address */
-	__u8	peer_addr[ETH_ALEN];
-
-	__le32	reserved;
-
-	/* Peer info - valid during add/update.  */
-	struct peer_capability_info	peer_info;
-} __attribute__((packed));
-
-static int mwl8k_cmd_update_sta_db(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif, __u32 action)
-{
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
-	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
-	struct mwl8k_cmd_update_sta_db *cmd;
-	struct peer_capability_info *peer_info;
-	int rc;
-
-	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
-	if (cmd == NULL)
-		return -ENOMEM;
-
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
-	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-
-	cmd->action = cpu_to_le32(action);
-	peer_info = &cmd->peer_info;
-	memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
-
-	switch (action) {
-	case MWL8K_STA_DB_ADD_ENTRY:
-	case MWL8K_STA_DB_MODIFY_ENTRY:
-		/* Build peer_info block */
-		peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
-		peer_info->basic_caps = cpu_to_le16(info->assoc_capability);
-		memcpy(peer_info->legacy_rates, mwl8k_rateids,
-		       sizeof(mwl8k_rateids));
-		peer_info->interop = 1;
-		peer_info->amsdu_enabled = 0;
-
-		rc = mwl8k_post_cmd(hw, &cmd->header);
-		if (rc == 0)
-			mv_vif->peer_id = peer_info->station_id;
-
-		break;
-
-	case MWL8K_STA_DB_DEL_ENTRY:
-	case MWL8K_STA_DB_FLUSH:
-	default:
-		rc = mwl8k_post_cmd(hw, &cmd->header);
-		if (rc == 0)
-			mv_vif->peer_id = 0;
-		break;
-	}
-	kfree(cmd);
-
-	return rc;
-}
-
-/*
- * CMD_SET_AID.
- */
-#define MWL8K_FRAME_PROT_DISABLED			0x00
-#define MWL8K_FRAME_PROT_11G				0x07
-#define MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY		0x02
-#define MWL8K_FRAME_PROT_11N_HT_ALL			0x06
-
-struct mwl8k_cmd_update_set_aid {
-	struct	mwl8k_cmd_pkt header;
-	__le16	aid;
-
-	 /* AP's MAC address (BSSID) */
-	__u8	bssid[ETH_ALEN];
-	__le16	protection_mode;
-	__u8	supp_rates[14];
-} __attribute__((packed));
-
-static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif)
-{
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
-	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
-	struct mwl8k_cmd_update_set_aid *cmd;
-	u16 prot_mode;
-	int rc;
-
-	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
-	if (cmd == NULL)
-		return -ENOMEM;
-
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_AID);
-	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->aid = cpu_to_le16(info->aid);
-
-	memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
-
-	if (info->use_cts_prot) {
-		prot_mode = MWL8K_FRAME_PROT_11G;
-	} else {
-		switch (info->ht_operation_mode &
-			IEEE80211_HT_OP_MODE_PROTECTION) {
-		case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
-			prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
-			break;
-		case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
-			prot_mode = MWL8K_FRAME_PROT_11N_HT_ALL;
-			break;
-		default:
-			prot_mode = MWL8K_FRAME_PROT_DISABLED;
-			break;
-		}
-	}
-	cmd->protection_mode = cpu_to_le16(prot_mode);
-
-	memcpy(cmd->supp_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
-
-	rc = mwl8k_post_cmd(hw, &cmd->header);
-	kfree(cmd);
+	if (!rc)
+		priv->wmm_enabled = enable;
 
 	return rc;
 }
 
 /*
- * CMD_SET_RATE.
+ * CMD_MIMO_CONFIG.
  */
-struct mwl8k_cmd_update_rateset {
-	struct	mwl8k_cmd_pkt header;
-	__u8	legacy_rates[14];
-
-	/* Bitmap for supported MCS codes.  */
-	__u8	mcs_set[16];
-	__u8	reserved[16];
+struct mwl8k_cmd_mimo_config {
+	struct mwl8k_cmd_pkt header;
+	__le32 action;
+	__u8 rx_antenna_map;
+	__u8 tx_antenna_map;
 } __attribute__((packed));
 
-static int mwl8k_update_rateset(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif)
+static int mwl8k_cmd_mimo_config(struct ieee80211_hw *hw, __u8 rx, __u8 tx)
 {
-	struct mwl8k_cmd_update_rateset *cmd;
+	struct mwl8k_cmd_mimo_config *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_MIMO_CONFIG);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	memcpy(cmd->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+	cmd->action = cpu_to_le32((u32)MWL8K_CMD_SET);
+	cmd->rx_antenna_map = rx;
+	cmd->tx_antenna_map = tx;
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2755,6 +2591,169 @@ static int mwl8k_cmd_use_fixed_rate(struct ieee80211_hw *hw,
 	return rc;
 }
 
+/*
+ * CMD_ENABLE_SNIFFER.
+ */
+struct mwl8k_cmd_enable_sniffer {
+	struct mwl8k_cmd_pkt header;
+	__le32 action;
+} __attribute__((packed));
+
+static int mwl8k_cmd_enable_sniffer(struct ieee80211_hw *hw, bool enable)
+{
+	struct mwl8k_cmd_enable_sniffer *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_ENABLE_SNIFFER);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le32(!!enable);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
+ * CMD_SET_MAC_ADDR.
+ */
+struct mwl8k_cmd_set_mac_addr {
+	struct mwl8k_cmd_pkt header;
+	union {
+		struct {
+			__le16 mac_type;
+			__u8 mac_addr[ETH_ALEN];
+		} mbss;
+		__u8 mac_addr[ETH_ALEN];
+	};
+} __attribute__((packed));
+
+static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_set_mac_addr *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	if (priv->ap_fw) {
+		cmd->mbss.mac_type = 0;
+		memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
+	} else {
+		memcpy(cmd->mac_addr, mac, ETH_ALEN);
+	}
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
+ * CMD_SET_RATEADAPT_MODE.
+ */
+struct mwl8k_cmd_set_rate_adapt_mode {
+	struct mwl8k_cmd_pkt header;
+	__le16 action;
+	__le16 mode;
+} __attribute__((packed));
+
+static int mwl8k_cmd_set_rateadapt_mode(struct ieee80211_hw *hw, __u16 mode)
+{
+	struct mwl8k_cmd_set_rate_adapt_mode *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATEADAPT_MODE);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le16(MWL8K_CMD_SET);
+	cmd->mode = cpu_to_le16(mode);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
+ * CMD_UPDATE_STADB.
+ */
+struct mwl8k_cmd_update_stadb {
+	struct mwl8k_cmd_pkt header;
+
+	/* See STADB_ACTION_TYPE */
+	__le32	action;
+
+	/* Peer MAC address */
+	__u8	peer_addr[ETH_ALEN];
+
+	__le32	reserved;
+
+	/* Peer info - valid during add/update.  */
+	struct peer_capability_info	peer_info;
+} __attribute__((packed));
+
+static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif, __u32 action)
+{
+	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
+	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
+	struct mwl8k_cmd_update_stadb *cmd;
+	struct peer_capability_info *peer_info;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+	cmd->action = cpu_to_le32(action);
+	peer_info = &cmd->peer_info;
+	memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
+
+	switch (action) {
+	case MWL8K_STA_DB_ADD_ENTRY:
+	case MWL8K_STA_DB_MODIFY_ENTRY:
+		/* Build peer_info block */
+		peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
+		peer_info->basic_caps = cpu_to_le16(info->assoc_capability);
+		memcpy(peer_info->legacy_rates, mwl8k_rateids,
+		       sizeof(mwl8k_rateids));
+		peer_info->interop = 1;
+		peer_info->amsdu_enabled = 0;
+
+		rc = mwl8k_post_cmd(hw, &cmd->header);
+		if (rc == 0)
+			mv_vif->peer_id = peer_info->station_id;
+
+		break;
+
+	case MWL8K_STA_DB_DEL_ENTRY:
+	case MWL8K_STA_DB_FLUSH:
+	default:
+		rc = mwl8k_post_cmd(hw, &cmd->header);
+		if (rc == 0)
+			mv_vif->peer_id = 0;
+		break;
+	}
+	kfree(cmd);
+
+	return rc;
+}
+
 
 /*
  * Interrupt handling.
@@ -2836,11 +2835,11 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 
 	rc = mwl8k_fw_lock(hw);
 	if (!rc) {
-		rc = mwl8k_cmd_802_11_radio_enable(hw);
+		rc = mwl8k_cmd_radio_enable(hw);
 
 		if (!priv->ap_fw) {
 			if (!rc)
-				rc = mwl8k_enable_sniffer(hw, 0);
+				rc = mwl8k_cmd_enable_sniffer(hw, 0);
 
 			if (!rc)
 				rc = mwl8k_cmd_set_pre_scan(hw);
@@ -2851,10 +2850,10 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 		}
 
 		if (!rc)
-			rc = mwl8k_cmd_setrateadaptmode(hw, 0);
+			rc = mwl8k_cmd_set_rateadapt_mode(hw, 0);
 
 		if (!rc)
-			rc = mwl8k_set_wmm(hw, 0);
+			rc = mwl8k_cmd_set_wmm_mode(hw, 0);
 
 		mwl8k_fw_unlock(hw);
 	}
@@ -2873,7 +2872,7 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 	struct mwl8k_priv *priv = hw->priv;
 	int i;
 
-	mwl8k_cmd_802_11_radio_disable(hw);
+	mwl8k_cmd_radio_disable(hw);
 
 	ieee80211_stop_queues(hw);
 
@@ -2929,7 +2928,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 
 	/* Set and save the mac address */
-	mwl8k_set_mac_addr(hw, conf->mac_addr);
+	mwl8k_cmd_set_mac_addr(hw, conf->mac_addr);
 	memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
 
 	/* Back pointer to parent config block */
@@ -2952,7 +2951,7 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 	if (priv->vif == NULL)
 		return;
 
-	mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+	mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
 
 	priv->vif = NULL;
 }
@@ -2964,7 +2963,7 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	int rc;
 
 	if (conf->flags & IEEE80211_CONF_IDLE) {
-		mwl8k_cmd_802_11_radio_disable(hw);
+		mwl8k_cmd_radio_disable(hw);
 		priv->current_channel = NULL;
 		return 0;
 	}
@@ -2973,7 +2972,7 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	if (rc)
 		return rc;
 
-	rc = mwl8k_cmd_802_11_radio_enable(hw);
+	rc = mwl8k_cmd_radio_enable(hw);
 	if (rc)
 		goto out;
 
@@ -2985,7 +2984,7 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 
 	if (conf->power_level > 18)
 		conf->power_level = 18;
-	rc = mwl8k_cmd_802_11_rf_tx_power(hw, conf->power_level);
+	rc = mwl8k_cmd_rf_tx_power(hw, conf->power_level);
 	if (rc)
 		goto out;
 
@@ -3028,7 +3027,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		memcpy(mwl8k_vif->bssid, info->bssid, ETH_ALEN);
 
 		/* Install rates */
-		rc = mwl8k_update_rateset(hw, vif);
+		rc = mwl8k_cmd_set_rate(hw, vif);
 		if (rc)
 			goto out;
 
@@ -3049,7 +3048,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 			goto out;
 
 		/* Update peer rate info */
-		rc = mwl8k_cmd_update_sta_db(hw, vif,
+		rc = mwl8k_cmd_update_stadb(hw, vif,
 				MWL8K_STA_DB_MODIFY_ENTRY);
 		if (rc)
 			goto out;
@@ -3066,7 +3065,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		memcpy(priv->capture_bssid, mwl8k_vif->bssid, ETH_ALEN);
 		priv->capture_beacon = true;
 	} else {
-		rc = mwl8k_cmd_update_sta_db(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
+		rc = mwl8k_cmd_update_stadb(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
 		memset(&mwl8k_vif->bss_info, 0,
 			sizeof(struct ieee80211_bss_conf));
 		memset(mwl8k_vif->bssid, 0, ETH_ALEN);
@@ -3114,7 +3113,7 @@ mwl8k_configure_filter_sniffer(struct ieee80211_hw *hw,
 	}
 
 	if (!priv->sniffer_enabled) {
-		if (mwl8k_enable_sniffer(hw, 1))
+		if (mwl8k_cmd_enable_sniffer(hw, 1))
 			return 0;
 		priv->sniffer_enabled = true;
 	}
@@ -3161,7 +3160,7 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 		return;
 
 	if (priv->sniffer_enabled) {
-		mwl8k_enable_sniffer(hw, 0);
+		mwl8k_cmd_enable_sniffer(hw, 0);
 		priv->sniffer_enabled = false;
 	}
 
@@ -3211,7 +3210,7 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 
 static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 {
-	return mwl8k_rts_threshold(hw, MWL8K_CMD_SET, value);
+	return mwl8k_cmd_set_rts_threshold(hw, MWL8K_CMD_SET, value);
 }
 
 static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
@@ -3223,14 +3222,14 @@ static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	rc = mwl8k_fw_lock(hw);
 	if (!rc) {
 		if (!priv->wmm_enabled)
-			rc = mwl8k_set_wmm(hw, 1);
+			rc = mwl8k_cmd_set_wmm_mode(hw, 1);
 
 		if (!rc)
-			rc = mwl8k_set_edca_params(hw, queue,
-						   params->cw_min,
-						   params->cw_max,
-						   params->aifs,
-						   params->txop);
+			rc = mwl8k_cmd_set_edca_params(hw, queue,
+						       params->cw_min,
+						       params->cw_max,
+						       params->aifs,
+						       params->txop);
 
 		mwl8k_fw_unlock(hw);
 	}
@@ -3259,7 +3258,7 @@ static int mwl8k_get_tx_stats(struct ieee80211_hw *hw,
 static int mwl8k_get_stats(struct ieee80211_hw *hw,
 			   struct ieee80211_low_level_stats *stats)
 {
-	return mwl8k_cmd_802_11_get_stat(hw, stats);
+	return mwl8k_cmd_get_stat(hw, stats);
 }
 
 static const struct ieee80211_ops mwl8k_ops = {
@@ -3302,7 +3301,7 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 	struct sk_buff *skb = priv->beacon_skb;
 	u8 dtim = MWL8K_VIF(priv->vif)->bss_info.dtim_period;
 
-	mwl8k_finalize_join(priv->hw, skb->data, skb->len, dtim);
+	mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len, dtim);
 	dev_kfree_skb(skb);
 
 	priv->beacon_skb = NULL;
@@ -3531,14 +3530,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	}
 
 	/* Turn radio off */
-	rc = mwl8k_cmd_802_11_radio_disable(hw);
+	rc = mwl8k_cmd_radio_disable(hw);
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
 	/* Clear MAC address */
-	rc = mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+	rc = mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot clear MAC address\n",
 		       wiphy_name(hw->wiphy));
-- 
cgit v1.2.3


From 99200a992e365a73dc67a6570524e5f3af4386dd Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:31:40 +0100
Subject: mwl8k: hw is never NULL in mwl8k_set_radio_preamble()

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index b543defdde8a..aba45ca43da7 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1990,11 +1990,7 @@ static int mwl8k_cmd_radio_enable(struct ieee80211_hw *hw)
 static int
 mwl8k_set_radio_preamble(struct ieee80211_hw *hw, bool short_preamble)
 {
-	struct mwl8k_priv *priv;
-
-	if (hw == NULL || hw->priv == NULL)
-		return -EINVAL;
-	priv = hw->priv;
+	struct mwl8k_priv *priv = hw->priv;
 
 	priv->radio_short_preamble = short_preamble;
 
-- 
cgit v1.2.3


From 74726e729291131ac2b9ab7e0bd2e18b7b03970d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:31:52 +0100
Subject: mwl8k: get rid of the AMSDU check in the transmit path

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index aba45ca43da7..18542fba1f43 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -677,14 +677,6 @@ static inline u16 mwl8k_qos_setbit_ack(u16 qos, u8 ack_policy)
 	return (qos & qos_mask) | ((ack_policy & val_mask) << shift);
 }
 
-static inline u16 mwl8k_qos_setbit_amsdu(u16 qos)
-{
-	u16 val_mask = 1 << 7;
-
-	/* AMSDU present Bit 7 */
-	return qos | val_mask;
-}
-
 static inline u16 mwl8k_qos_setbit_qlen(u16 qos, u8 len)
 {
 	u16 val_mask = 0xff;
@@ -1474,9 +1466,6 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 		else
 			qos = mwl8k_qos_setbit_ack(qos,
 				MWL8K_TXD_ACK_POLICY_NORMAL);
-
-		if (qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
-			qos = mwl8k_qos_setbit_amsdu(qos);
 	}
 
 	dma = pci_map_single(priv->pdev, skb->data,
-- 
cgit v1.2.3


From e0493a8dd6351a114b53790dda6bd855ae73a85c Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:32:00 +0100
Subject: mwl8k: inline qos field manipulation functions

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 51 +++++++++-----------------------------------
 1 file changed, 10 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 18542fba1f43..8cbb52cc4269 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -658,35 +658,6 @@ struct peer_capability_info {
 	__le16	amsdu_enabled;
 } __attribute__((packed));
 
-/* Inline functions to manipulate QoS field in data descriptor.  */
-static inline u16 mwl8k_qos_setbit_eosp(u16 qos)
-{
-	u16 val_mask = 1 << 4;
-
-	/* End of Service Period Bit 4 */
-	return qos | val_mask;
-}
-
-static inline u16 mwl8k_qos_setbit_ack(u16 qos, u8 ack_policy)
-{
-	u16 val_mask = 0x3;
-	u8	shift = 5;
-	u16 qos_mask = ~(val_mask << shift);
-
-	/* Ack Policy Bit 5-6 */
-	return (qos & qos_mask) | ((ack_policy & val_mask) << shift);
-}
-
-static inline u16 mwl8k_qos_setbit_qlen(u16 qos, u8 len)
-{
-	u16 val_mask = 0xff;
-	u8	shift = 8;
-	u16 qos_mask = ~(val_mask << shift);
-
-	/* Queue Length Bits 8-15 */
-	return (qos & qos_mask) | ((len & val_mask) << shift);
-}
-
 /* DMA header used by firmware and hardware.  */
 struct mwl8k_dma_data {
 	__le16 fwlen;
@@ -1145,16 +1116,18 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
  * Packet transmission.
  */
 
-/* Transmit packet ACK policy */
-#define MWL8K_TXD_ACK_POLICY_NORMAL		0
-#define MWL8K_TXD_ACK_POLICY_BLOCKACK		3
-
 #define MWL8K_TXD_STATUS_OK			0x00000001
 #define MWL8K_TXD_STATUS_OK_RETRY		0x00000002
 #define MWL8K_TXD_STATUS_OK_MORE_RETRY		0x00000004
 #define MWL8K_TXD_STATUS_MULTICAST_TX		0x00000008
 #define MWL8K_TXD_STATUS_FW_OWNED		0x80000000
 
+#define MWL8K_QOS_QLEN_UNSPEC			0xff00
+#define MWL8K_QOS_ACK_POLICY_MASK		0x0060
+#define MWL8K_QOS_ACK_POLICY_NORMAL		0x0000
+#define MWL8K_QOS_ACK_POLICY_BLOCKACK		0x0060
+#define MWL8K_QOS_EOSP				0x0010
+
 struct mwl8k_tx_desc {
 	__le32 status;
 	__u8 data_rate;
@@ -1451,21 +1424,17 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 	if (ieee80211_is_mgmt(wh->frame_control) ||
 	    ieee80211_is_ctl(wh->frame_control)) {
 		txdatarate = 0;
-		qos = mwl8k_qos_setbit_eosp(qos);
-		/* Set Queue size to unspecified */
-		qos = mwl8k_qos_setbit_qlen(qos, 0xff);
+		qos |= MWL8K_QOS_QLEN_UNSPEC | MWL8K_QOS_EOSP;
 	} else if (ieee80211_is_data(wh->frame_control)) {
 		txdatarate = 1;
 		if (is_multicast_ether_addr(wh->addr1))
 			txstatus |= MWL8K_TXD_STATUS_MULTICAST_TX;
 
-		/* Send pkt in an aggregate if AMPDU frame.  */
+		qos &= ~MWL8K_QOS_ACK_POLICY_MASK;
 		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
-			qos = mwl8k_qos_setbit_ack(qos,
-				MWL8K_TXD_ACK_POLICY_BLOCKACK);
+			qos |= MWL8K_QOS_ACK_POLICY_BLOCKACK;
 		else
-			qos = mwl8k_qos_setbit_ack(qos,
-				MWL8K_TXD_ACK_POLICY_NORMAL);
+			qos |= MWL8K_QOS_ACK_POLICY_NORMAL;
 	}
 
 	dma = pci_map_single(priv->pdev, skb->data,
-- 
cgit v1.2.3


From 49eb691c8f48a29adfdfbdeb82433f1f8cb6524d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:32:13 +0100
Subject: mwl8k: initialize the mwl8k_info_tbl table using the MWL* enums

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 8cbb52cc4269..5c849aa86139 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3267,14 +3267,14 @@ enum {
 };
 
 static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
-	{
+	[MWL8687] = {
 		.part_name	= "88w8687",
 		.helper_image	= "mwl8k/helper_8687.fw",
 		.fw_image	= "mwl8k/fmimage_8687.fw",
 		.rxd_ops	= &rxd_8687_ops,
 		.modes		= BIT(NL80211_IFTYPE_STATION),
 	},
-	{
+	[MWL8366] = {
 		.part_name	= "88w8366",
 		.helper_image	= "mwl8k/helper_8366.fw",
 		.fw_image	= "mwl8k/fmimage_8366.fw",
-- 
cgit v1.2.3


From 647ca6b01a5289948e970ea7c1f656f9d90b0a27 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:32:20 +0100
Subject: mwl8k: add 2.4GHz channels 12, 13 and 14

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 5c849aa86139..c54f8305df18 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -242,6 +242,9 @@ static const struct ieee80211_channel mwl8k_channels[] = {
 	{ .center_freq = 2452, .hw_value = 9, },
 	{ .center_freq = 2457, .hw_value = 10, },
 	{ .center_freq = 2462, .hw_value = 11, },
+	{ .center_freq = 2467, .hw_value = 12, },
+	{ .center_freq = 2472, .hw_value = 13, },
+	{ .center_freq = 2484, .hw_value = 14, },
 };
 
 static const struct ieee80211_rate mwl8k_rates[] = {
-- 
cgit v1.2.3


From 22be40d9c53faa10d03a679160e0854ad115b610 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:32:38 +0100
Subject: mwl8k: get rid of the struct mwl8k_firmware abstraction

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index c54f8305df18..19fe7124d93a 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -126,15 +126,6 @@ struct mwl8k_tx_queue {
 	struct sk_buff **skb;
 };
 
-/* Pointers to the firmware data and meta information about it.  */
-struct mwl8k_firmware {
-	/* Boot helper code */
-	struct firmware *helper;
-
-	/* Microcode */
-	struct firmware *ucode;
-};
-
 struct mwl8k_priv {
 	void __iomem *sram;
 	void __iomem *regs;
@@ -147,7 +138,8 @@ struct mwl8k_priv {
 	struct rxd_ops *rxd_ops;
 
 	/* firmware files and meta data */
-	struct mwl8k_firmware fw;
+	struct firmware *fw_helper;
+	struct firmware *fw_ucode;
 
 	/* firmware access */
 	struct mutex fw_mutex;
@@ -358,8 +350,8 @@ static void mwl8k_release_fw(struct firmware **fw)
 
 static void mwl8k_release_firmware(struct mwl8k_priv *priv)
 {
-	mwl8k_release_fw(&priv->fw.ucode);
-	mwl8k_release_fw(&priv->fw.helper);
+	mwl8k_release_fw(&priv->fw_ucode);
+	mwl8k_release_fw(&priv->fw_helper);
 }
 
 /* Request fw image */
@@ -380,7 +372,7 @@ static int mwl8k_request_firmware(struct mwl8k_priv *priv)
 	int rc;
 
 	if (di->helper_image != NULL) {
-		rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw.helper);
+		rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw_helper);
 		if (rc) {
 			printk(KERN_ERR "%s: Error requesting helper "
 			       "firmware file %s\n", pci_name(priv->pdev),
@@ -389,11 +381,11 @@ static int mwl8k_request_firmware(struct mwl8k_priv *priv)
 		}
 	}
 
-	rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw.ucode);
+	rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw_ucode);
 	if (rc) {
 		printk(KERN_ERR "%s: Error requesting firmware file %s\n",
 		       pci_name(priv->pdev), di->fw_image);
-		mwl8k_release_fw(&priv->fw.helper);
+		mwl8k_release_fw(&priv->fw_helper);
 		return rc;
 	}
 
@@ -554,13 +546,13 @@ static int mwl8k_feed_fw_image(struct mwl8k_priv *priv,
 static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct firmware *fw = priv->fw.ucode;
+	struct firmware *fw = priv->fw_ucode;
 	struct mwl8k_device_info *di = priv->device_info;
 	int rc;
 	int loops;
 
 	if (!memcmp(fw->data, "\x01\x00\x00\x00", 4)) {
-		struct firmware *helper = priv->fw.helper;
+		struct firmware *helper = priv->fw_helper;
 
 		if (helper == NULL) {
 			printk(KERN_ERR "%s: helper image needed but none "
-- 
cgit v1.2.3


From be695fc4f0a7ff9c9f91d59536b029b781cfea62 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:32:46 +0100
Subject: mwl8k: do rx/tx ring initialisation after loading firmware

Whether the firmware we have loaded is AP or STA firmware decides
which receive descriptor format we have to use.  Therefore, move
rx/tx ring initialisation to be after firmware loading.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 104 ++++++++++++++++++++++++-------------------
 1 file changed, 57 insertions(+), 47 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 19fe7124d93a..0ae56cb6b0b3 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -127,20 +127,22 @@ struct mwl8k_tx_queue {
 };
 
 struct mwl8k_priv {
-	void __iomem *sram;
-	void __iomem *regs;
 	struct ieee80211_hw *hw;
-
 	struct pci_dev *pdev;
 
 	struct mwl8k_device_info *device_info;
-	bool ap_fw;
-	struct rxd_ops *rxd_ops;
 
-	/* firmware files and meta data */
+	void __iomem *sram;
+	void __iomem *regs;
+
+	/* firmware */
 	struct firmware *fw_helper;
 	struct firmware *fw_ucode;
 
+	/* hardware/firmware parameters */
+	bool ap_fw;
+	struct rxd_ops *rxd_ops;
+
 	/* firmware access */
 	struct mutex fw_mutex;
 	struct task_struct *fw_mutex_owner;
@@ -547,7 +549,6 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct firmware *fw = priv->fw_ucode;
-	struct mwl8k_device_info *di = priv->device_info;
 	int rc;
 	int loops;
 
@@ -579,7 +580,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 		return rc;
 	}
 
-	if (di->modes & BIT(NL80211_IFTYPE_AP))
+	if (priv->device_info->modes & BIT(NL80211_IFTYPE_AP))
 		iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
 	else
 		iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
@@ -3300,6 +3301,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		printed_version = 1;
 	}
 
+
 	rc = pci_enable_device(pdev);
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot enable new PCI device\n",
@@ -3316,6 +3318,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
+
 	hw = ieee80211_alloc_hw(sizeof(*priv), &mwl8k_ops);
 	if (hw == NULL) {
 		printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME);
@@ -3323,17 +3326,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		goto err_free_reg;
 	}
 
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+	pci_set_drvdata(pdev, hw);
+
 	priv = hw->priv;
 	priv->hw = hw;
 	priv->pdev = pdev;
 	priv->device_info = &mwl8k_info_tbl[id->driver_data];
-	priv->rxd_ops = priv->device_info->rxd_ops;
-	priv->sniffer_enabled = false;
-	priv->wmm_enabled = false;
-	priv->pending_tx_pkts = 0;
 
-	SET_IEEE80211_DEV(hw, &pdev->dev);
-	pci_set_drvdata(pdev, hw);
 
 	priv->sram = pci_iomap(pdev, 0, 0x10000);
 	if (priv->sram == NULL) {
@@ -3356,6 +3356,37 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		}
 	}
 
+
+	/* Reset firmware and hardware */
+	mwl8k_hw_reset(priv);
+
+	/* Ask userland hotplug daemon for the device firmware */
+	rc = mwl8k_request_firmware(priv);
+	if (rc) {
+		printk(KERN_ERR "%s: Firmware files not found\n",
+		       wiphy_name(hw->wiphy));
+		goto err_stop_firmware;
+	}
+
+	/* Load firmware into hardware */
+	rc = mwl8k_load_firmware(hw);
+	if (rc) {
+		printk(KERN_ERR "%s: Cannot start firmware\n",
+		       wiphy_name(hw->wiphy));
+		goto err_stop_firmware;
+	}
+
+	/* Reclaim memory once firmware is successfully loaded */
+	mwl8k_release_firmware(priv);
+
+
+	priv->rxd_ops = priv->device_info->rxd_ops;
+
+	priv->sniffer_enabled = false;
+	priv->wmm_enabled = false;
+	priv->pending_tx_pkts = 0;
+
+
 	memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels));
 	priv->band.band = IEEE80211_BAND_2GHZ;
 	priv->band.channels = priv->channels;
@@ -3400,11 +3431,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	/* Power management cookie */
 	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
 	if (priv->cookie == NULL)
-		goto err_iounmap;
+		goto err_stop_firmware;
 
 	rc = mwl8k_rxq_init(hw, 0);
 	if (rc)
-		goto err_iounmap;
+		goto err_free_cookie;
 	rxq_refill(hw, 0, INT_MAX);
 
 	mutex_init(&priv->fw_mutex);
@@ -3435,28 +3466,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		goto err_free_queues;
 	}
 
-	/* Reset firmware and hardware */
-	mwl8k_hw_reset(priv);
-
-	/* Ask userland hotplug daemon for the device firmware */
-	rc = mwl8k_request_firmware(priv);
-	if (rc) {
-		printk(KERN_ERR "%s: Firmware files not found\n",
-		       wiphy_name(hw->wiphy));
-		goto err_free_irq;
-	}
-
-	/* Load firmware into hardware */
-	rc = mwl8k_load_firmware(hw);
-	if (rc) {
-		printk(KERN_ERR "%s: Cannot start firmware\n",
-		       wiphy_name(hw->wiphy));
-		goto err_stop_firmware;
-	}
-
-	/* Reclaim memory once firmware is successfully loaded */
-	mwl8k_release_firmware(priv);
-
 	/*
 	 * Temporarily enable interrupts.  Initial firmware host
 	 * commands use interrupts and avoids polling.  Disable
@@ -3475,14 +3484,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot initialise firmware\n",
 		       wiphy_name(hw->wiphy));
-		goto err_stop_firmware;
+		goto err_free_irq;
 	}
 
 	/* Turn radio off */
 	rc = mwl8k_cmd_radio_disable(hw);
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
-		goto err_stop_firmware;
+		goto err_free_irq;
 	}
 
 	/* Clear MAC address */
@@ -3490,7 +3499,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot clear MAC address\n",
 		       wiphy_name(hw->wiphy));
-		goto err_stop_firmware;
+		goto err_free_irq;
 	}
 
 	/* Disable interrupts */
@@ -3501,7 +3510,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot register device\n",
 		       wiphy_name(hw->wiphy));
-		goto err_stop_firmware;
+		goto err_free_irq;
 	}
 
 	printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
@@ -3513,10 +3522,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	return 0;
 
-err_stop_firmware:
-	mwl8k_hw_reset(priv);
-	mwl8k_release_firmware(priv);
-
 err_free_irq:
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
 	free_irq(priv->pdev->irq, hw);
@@ -3526,11 +3531,16 @@ err_free_queues:
 		mwl8k_txq_deinit(hw, i);
 	mwl8k_rxq_deinit(hw, 0);
 
-err_iounmap:
+err_free_cookie:
 	if (priv->cookie != NULL)
 		pci_free_consistent(priv->pdev, 4,
 				priv->cookie, priv->cookie_dma);
 
+err_stop_firmware:
+	mwl8k_hw_reset(priv);
+	mwl8k_release_firmware(priv);
+
+err_iounmap:
 	if (priv->regs != NULL)
 		pci_iounmap(pdev, priv->regs);
 
-- 
cgit v1.2.3


From 89a91f4f4cdae92daf3693d4852ae4958abb6c58 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:32:54 +0100
Subject: mwl8k: fix up AP vs. STA firmware image receive descriptor handling

The receive descriptor ops that are currently marked as being for
8687 only are actually used for all STA firmware images, whereas the
receive descriptor ops marked as 8366 are only used on 8366 when an
AP firmware image is in use.

Rename the receive descriptor ops to reflect this, use the STA ops
unconditionally if the firmware image loaded reported the STA ready
code, and rename the mwl8k_device_info::rxd_ops member to ap_rxd_ops
to indicate that it should only be used if we are running on AP
firmware.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 124 +++++++++++++++++++++----------------------
 1 file changed, 60 insertions(+), 64 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 0ae56cb6b0b3..b20820a015cc 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -92,8 +92,7 @@ struct mwl8k_device_info {
 	char *part_name;
 	char *helper_image;
 	char *fw_image;
-	struct rxd_ops *rxd_ops;
-	u16 modes;
+	struct rxd_ops *ap_rxd_ops;
 };
 
 struct mwl8k_rx_queue {
@@ -580,10 +579,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 		return rc;
 	}
 
-	if (priv->device_info->modes & BIT(NL80211_IFTYPE_AP))
-		iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
-	else
-		iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
+	iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
 
 	loops = 500000;
 	do {
@@ -720,9 +716,9 @@ static inline void mwl8k_add_dma_header(struct sk_buff *skb)
 
 
 /*
- * Packet reception for 88w8366.
+ * Packet reception for 88w8366 AP firmware.
  */
-struct mwl8k_rxd_8366 {
+struct mwl8k_rxd_8366_ap {
 	__le16 pkt_len;
 	__u8 sq2;
 	__u8 rate;
@@ -740,23 +736,23 @@ struct mwl8k_rxd_8366 {
 	__u8 rx_ctrl;
 } __attribute__((packed));
 
-#define MWL8K_8366_RATE_INFO_MCS_FORMAT		0x80
-#define MWL8K_8366_RATE_INFO_40MHZ		0x40
-#define MWL8K_8366_RATE_INFO_RATEID(x)		((x) & 0x3f)
+#define MWL8K_8366_AP_RATE_INFO_MCS_FORMAT	0x80
+#define MWL8K_8366_AP_RATE_INFO_40MHZ		0x40
+#define MWL8K_8366_AP_RATE_INFO_RATEID(x)	((x) & 0x3f)
 
-#define MWL8K_8366_RX_CTRL_OWNED_BY_HOST	0x80
+#define MWL8K_8366_AP_RX_CTRL_OWNED_BY_HOST	0x80
 
-static void mwl8k_rxd_8366_init(void *_rxd, dma_addr_t next_dma_addr)
+static void mwl8k_rxd_8366_ap_init(void *_rxd, dma_addr_t next_dma_addr)
 {
-	struct mwl8k_rxd_8366 *rxd = _rxd;
+	struct mwl8k_rxd_8366_ap *rxd = _rxd;
 
 	rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
-	rxd->rx_ctrl = MWL8K_8366_RX_CTRL_OWNED_BY_HOST;
+	rxd->rx_ctrl = MWL8K_8366_AP_RX_CTRL_OWNED_BY_HOST;
 }
 
-static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len)
+static void mwl8k_rxd_8366_ap_refill(void *_rxd, dma_addr_t addr, int len)
 {
-	struct mwl8k_rxd_8366 *rxd = _rxd;
+	struct mwl8k_rxd_8366_ap *rxd = _rxd;
 
 	rxd->pkt_len = cpu_to_le16(len);
 	rxd->pkt_phys_addr = cpu_to_le32(addr);
@@ -765,12 +761,12 @@ static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len)
 }
 
 static int
-mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status,
-		       __le16 *qos)
+mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status,
+			  __le16 *qos)
 {
-	struct mwl8k_rxd_8366 *rxd = _rxd;
+	struct mwl8k_rxd_8366_ap *rxd = _rxd;
 
-	if (!(rxd->rx_ctrl & MWL8K_8366_RX_CTRL_OWNED_BY_HOST))
+	if (!(rxd->rx_ctrl & MWL8K_8366_AP_RX_CTRL_OWNED_BY_HOST))
 		return -1;
 	rmb();
 
@@ -779,11 +775,11 @@ mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status,
 	status->signal = -rxd->rssi;
 	status->noise = -rxd->noise_floor;
 
-	if (rxd->rate & MWL8K_8366_RATE_INFO_MCS_FORMAT) {
+	if (rxd->rate & MWL8K_8366_AP_RATE_INFO_MCS_FORMAT) {
 		status->flag |= RX_FLAG_HT;
-		if (rxd->rate & MWL8K_8366_RATE_INFO_40MHZ)
+		if (rxd->rate & MWL8K_8366_AP_RATE_INFO_40MHZ)
 			status->flag |= RX_FLAG_40MHZ;
-		status->rate_idx = MWL8K_8366_RATE_INFO_RATEID(rxd->rate);
+		status->rate_idx = MWL8K_8366_AP_RATE_INFO_RATEID(rxd->rate);
 	} else {
 		int i;
 
@@ -803,17 +799,17 @@ mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status,
 	return le16_to_cpu(rxd->pkt_len);
 }
 
-static struct rxd_ops rxd_8366_ops = {
-	.rxd_size	= sizeof(struct mwl8k_rxd_8366),
-	.rxd_init	= mwl8k_rxd_8366_init,
-	.rxd_refill	= mwl8k_rxd_8366_refill,
-	.rxd_process	= mwl8k_rxd_8366_process,
+static struct rxd_ops rxd_8366_ap_ops = {
+	.rxd_size	= sizeof(struct mwl8k_rxd_8366_ap),
+	.rxd_init	= mwl8k_rxd_8366_ap_init,
+	.rxd_refill	= mwl8k_rxd_8366_ap_refill,
+	.rxd_process	= mwl8k_rxd_8366_ap_process,
 };
 
 /*
- * Packet reception for 88w8687.
+ * Packet reception for STA firmware.
  */
-struct mwl8k_rxd_8687 {
+struct mwl8k_rxd_sta {
 	__le16 pkt_len;
 	__u8 link_quality;
 	__u8 noise_level;
@@ -830,26 +826,26 @@ struct mwl8k_rxd_8687 {
 	__u8 pad2[2];
 } __attribute__((packed));
 
-#define MWL8K_8687_RATE_INFO_SHORTPRE		0x8000
-#define MWL8K_8687_RATE_INFO_ANTSELECT(x)	(((x) >> 11) & 0x3)
-#define MWL8K_8687_RATE_INFO_RATEID(x)		(((x) >> 3) & 0x3f)
-#define MWL8K_8687_RATE_INFO_40MHZ		0x0004
-#define MWL8K_8687_RATE_INFO_SHORTGI		0x0002
-#define MWL8K_8687_RATE_INFO_MCS_FORMAT		0x0001
+#define MWL8K_STA_RATE_INFO_SHORTPRE		0x8000
+#define MWL8K_STA_RATE_INFO_ANTSELECT(x)	(((x) >> 11) & 0x3)
+#define MWL8K_STA_RATE_INFO_RATEID(x)		(((x) >> 3) & 0x3f)
+#define MWL8K_STA_RATE_INFO_40MHZ		0x0004
+#define MWL8K_STA_RATE_INFO_SHORTGI		0x0002
+#define MWL8K_STA_RATE_INFO_MCS_FORMAT		0x0001
 
-#define MWL8K_8687_RX_CTRL_OWNED_BY_HOST	0x02
+#define MWL8K_STA_RX_CTRL_OWNED_BY_HOST		0x02
 
-static void mwl8k_rxd_8687_init(void *_rxd, dma_addr_t next_dma_addr)
+static void mwl8k_rxd_sta_init(void *_rxd, dma_addr_t next_dma_addr)
 {
-	struct mwl8k_rxd_8687 *rxd = _rxd;
+	struct mwl8k_rxd_sta *rxd = _rxd;
 
 	rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
-	rxd->rx_ctrl = MWL8K_8687_RX_CTRL_OWNED_BY_HOST;
+	rxd->rx_ctrl = MWL8K_STA_RX_CTRL_OWNED_BY_HOST;
 }
 
-static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len)
+static void mwl8k_rxd_sta_refill(void *_rxd, dma_addr_t addr, int len)
 {
-	struct mwl8k_rxd_8687 *rxd = _rxd;
+	struct mwl8k_rxd_sta *rxd = _rxd;
 
 	rxd->pkt_len = cpu_to_le16(len);
 	rxd->pkt_phys_addr = cpu_to_le32(addr);
@@ -858,13 +854,13 @@ static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len)
 }
 
 static int
-mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status,
+mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status,
 		       __le16 *qos)
 {
-	struct mwl8k_rxd_8687 *rxd = _rxd;
+	struct mwl8k_rxd_sta *rxd = _rxd;
 	u16 rate_info;
 
-	if (!(rxd->rx_ctrl & MWL8K_8687_RX_CTRL_OWNED_BY_HOST))
+	if (!(rxd->rx_ctrl & MWL8K_STA_RX_CTRL_OWNED_BY_HOST))
 		return -1;
 	rmb();
 
@@ -874,16 +870,16 @@ mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status,
 
 	status->signal = -rxd->rssi;
 	status->noise = -rxd->noise_level;
-	status->antenna = MWL8K_8687_RATE_INFO_ANTSELECT(rate_info);
-	status->rate_idx = MWL8K_8687_RATE_INFO_RATEID(rate_info);
+	status->antenna = MWL8K_STA_RATE_INFO_ANTSELECT(rate_info);
+	status->rate_idx = MWL8K_STA_RATE_INFO_RATEID(rate_info);
 
-	if (rate_info & MWL8K_8687_RATE_INFO_SHORTPRE)
+	if (rate_info & MWL8K_STA_RATE_INFO_SHORTPRE)
 		status->flag |= RX_FLAG_SHORTPRE;
-	if (rate_info & MWL8K_8687_RATE_INFO_40MHZ)
+	if (rate_info & MWL8K_STA_RATE_INFO_40MHZ)
 		status->flag |= RX_FLAG_40MHZ;
-	if (rate_info & MWL8K_8687_RATE_INFO_SHORTGI)
+	if (rate_info & MWL8K_STA_RATE_INFO_SHORTGI)
 		status->flag |= RX_FLAG_SHORT_GI;
-	if (rate_info & MWL8K_8687_RATE_INFO_MCS_FORMAT)
+	if (rate_info & MWL8K_STA_RATE_INFO_MCS_FORMAT)
 		status->flag |= RX_FLAG_HT;
 
 	status->band = IEEE80211_BAND_2GHZ;
@@ -894,11 +890,11 @@ mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status,
 	return le16_to_cpu(rxd->pkt_len);
 }
 
-static struct rxd_ops rxd_8687_ops = {
-	.rxd_size	= sizeof(struct mwl8k_rxd_8687),
-	.rxd_init	= mwl8k_rxd_8687_init,
-	.rxd_refill	= mwl8k_rxd_8687_refill,
-	.rxd_process	= mwl8k_rxd_8687_process,
+static struct rxd_ops rxd_sta_ops = {
+	.rxd_size	= sizeof(struct mwl8k_rxd_sta),
+	.rxd_init	= mwl8k_rxd_sta_init,
+	.rxd_refill	= mwl8k_rxd_sta_refill,
+	.rxd_process	= mwl8k_rxd_sta_process,
 };
 
 
@@ -3267,15 +3263,12 @@ static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
 		.part_name	= "88w8687",
 		.helper_image	= "mwl8k/helper_8687.fw",
 		.fw_image	= "mwl8k/fmimage_8687.fw",
-		.rxd_ops	= &rxd_8687_ops,
-		.modes		= BIT(NL80211_IFTYPE_STATION),
 	},
 	[MWL8366] = {
 		.part_name	= "88w8366",
 		.helper_image	= "mwl8k/helper_8366.fw",
 		.fw_image	= "mwl8k/fmimage_8366.fw",
-		.rxd_ops	= &rxd_8366_ops,
-		.modes		= 0,
+		.ap_rxd_ops	= &rxd_8366_ap_ops,
 	},
 };
 
@@ -3380,7 +3373,10 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	mwl8k_release_firmware(priv);
 
 
-	priv->rxd_ops = priv->device_info->rxd_ops;
+	if (priv->ap_fw)
+		priv->rxd_ops = priv->device_info->ap_rxd_ops;
+	else
+		priv->rxd_ops = &rxd_sta_ops;
 
 	priv->sniffer_enabled = false;
 	priv->wmm_enabled = false;
@@ -3409,8 +3405,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	hw->queues = MWL8K_TX_QUEUES;
 
-	hw->wiphy->interface_modes = priv->device_info->modes;
-
 	/* Set rssi and noise values to dBm */
 	hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
 	hw->vif_data_size = sizeof(struct mwl8k_vif);
@@ -3480,6 +3474,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 			rc = mwl8k_cmd_set_hw_spec(hw);
 	} else {
 		rc = mwl8k_cmd_get_hw_spec_sta(hw);
+
+		hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	}
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot initialise firmware\n",
-- 
cgit v1.2.3


From 97474782959af87f5dc8049fca3bd3b25eb68308 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:33:04 +0100
Subject: mwl8k: remove unused mwl8k_vif::priv

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index b20820a015cc..6fa2bde5b618 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -204,9 +204,6 @@ struct mwl8k_priv {
 
 /* Per interface specific private data */
 struct mwl8k_vif {
-	/* backpointer to parent config block */
-	struct mwl8k_priv *priv;
-
 	/* BSS config of AP or IBSS from mac80211*/
 	struct ieee80211_bss_conf bss_info;
 
@@ -2877,9 +2874,6 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	mwl8k_cmd_set_mac_addr(hw, conf->mac_addr);
 	memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
 
-	/* Back pointer to parent config block */
-	mwl8k_vif->priv = priv;
-
 	/* Set Initial sequence number to zero */
 	mwl8k_vif->seqno = 0;
 
-- 
cgit v1.2.3


From 7dc6a7a7635365b140af969e972900866d0bf34b Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:33:09 +0100
Subject: mwl8k: remove duplicate local per-vif copy of ieee80211_bss_conf

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 38 ++++++++++++++++----------------------
 1 file changed, 16 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 6fa2bde5b618..97a95decf9a8 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -204,12 +204,11 @@ struct mwl8k_priv {
 
 /* Per interface specific private data */
 struct mwl8k_vif {
-	/* BSS config of AP or IBSS from mac80211*/
-	struct ieee80211_bss_conf bss_info;
+	/* Local MAC address.  */
+	u8 mac_addr[ETH_ALEN];
 
-	/* BSSID of AP or IBSS */
-	u8	bssid[ETH_ALEN];
-	u8	mac_addr[ETH_ALEN];
+	/* BSSID of AP.  */
+	u8 bssid[ETH_ALEN];
 
 	/* Index into station database. Returned by UPDATE_STADB.  */
 	u8	peer_id;
@@ -2123,7 +2122,6 @@ static int
 mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
 	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
-	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
 	struct mwl8k_cmd_update_set_aid *cmd;
 	u16 prot_mode;
 	int rc;
@@ -2134,14 +2132,14 @@ mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_AID);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->aid = cpu_to_le16(info->aid);
+	cmd->aid = cpu_to_le16(vif->bss_conf.aid);
 
 	memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
 
-	if (info->use_cts_prot) {
+	if (vif->bss_conf.use_cts_prot) {
 		prot_mode = MWL8K_FRAME_PROT_11G;
 	} else {
-		switch (info->ht_operation_mode &
+		switch (vif->bss_conf.ht_operation_mode &
 			IEEE80211_HT_OP_MODE_PROTECTION) {
 		case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
 			prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
@@ -2651,7 +2649,6 @@ static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
 		struct ieee80211_vif *vif, __u32 action)
 {
 	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
-	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
 	struct mwl8k_cmd_update_stadb *cmd;
 	struct peer_capability_info *peer_info;
 	int rc;
@@ -2672,7 +2669,8 @@ static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
 	case MWL8K_STA_DB_MODIFY_ENTRY:
 		/* Build peer_info block */
 		peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
-		peer_info->basic_caps = cpu_to_le16(info->assoc_capability);
+		peer_info->basic_caps =
+			cpu_to_le16(vif->bss_conf.assoc_capability);
 		memcpy(peer_info->legacy_rates, mwl8k_rateids,
 		       sizeof(mwl8k_rateids));
 		peer_info->interop = 1;
@@ -2960,11 +2958,8 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 	if (rc)
 		return;
 
-	if (info->assoc) {
-		memcpy(&mwl8k_vif->bss_info, info,
-			sizeof(struct ieee80211_bss_conf));
-
-		memcpy(mwl8k_vif->bssid, info->bssid, ETH_ALEN);
+	if (vif->bss_conf.assoc) {
+		memcpy(mwl8k_vif->bssid, vif->bss_conf.bssid, ETH_ALEN);
 
 		/* Install rates */
 		rc = mwl8k_cmd_set_rate(hw, vif);
@@ -2978,12 +2973,13 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 			goto out;
 
 		/* Set radio preamble */
-		rc = mwl8k_set_radio_preamble(hw, info->use_short_preamble);
+		rc = mwl8k_set_radio_preamble(hw,
+				vif->bss_conf.use_short_preamble);
 		if (rc)
 			goto out;
 
 		/* Set slot time */
-		rc = mwl8k_cmd_set_slot(hw, info->use_short_slot);
+		rc = mwl8k_cmd_set_slot(hw, vif->bss_conf.use_short_slot);
 		if (rc)
 			goto out;
 
@@ -3006,8 +3002,6 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		priv->capture_beacon = true;
 	} else {
 		rc = mwl8k_cmd_update_stadb(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
-		memset(&mwl8k_vif->bss_info, 0,
-			sizeof(struct ieee80211_bss_conf));
 		memset(mwl8k_vif->bssid, 0, ETH_ALEN);
 	}
 
@@ -3239,9 +3233,9 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 	struct mwl8k_priv *priv =
 		container_of(work, struct mwl8k_priv, finalize_join_worker);
 	struct sk_buff *skb = priv->beacon_skb;
-	u8 dtim = MWL8K_VIF(priv->vif)->bss_info.dtim_period;
 
-	mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len, dtim);
+	mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len,
+				priv->vif->bss_conf.dtim_period);
 	dev_kfree_skb(skb);
 
 	priv->beacon_skb = NULL;
-- 
cgit v1.2.3


From b02914af4d7020828ce921a572589dd793517c09 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Thu, 10 Dec 2009 17:35:01 -0600
Subject: b43: Allow PIO mode to be selected at module load

If userencounter the "Fatal DMA Problem" with a BCM43XX device, and
still wish to use b43 as the driver, their only option is to rebuild
the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and
allows PIO mode to be selected with a load-time parameter for the module.
Note that the configuration variable CONFIG_B43_PIO is also removed.

Once the DMA problem with the BCM4312 devices is solved, this patch will
likely be reverted.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: John Daiker <daikerjohn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/Kconfig  | 17 +----------------
 drivers/net/wireless/b43/Makefile |  2 +-
 drivers/net/wireless/b43/b43.h    | 13 -------------
 drivers/net/wireless/b43/dma.c    |  2 --
 drivers/net/wireless/b43/main.c   |  9 ++++++---
 drivers/net/wireless/b43/pio.h    | 40 ---------------------------------------
 6 files changed, 8 insertions(+), 75 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 64c12e1bced3..073be566d05e 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,6 +3,7 @@ config B43
 	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
+	select SSB_BLOCKIO
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
 
@@ -78,14 +79,6 @@ config B43_SDIO
 
 	  If unsure, say N.
 
-# Data transfers to the device via PIO
-# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
-config B43_PIO
-	bool
-	depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
-	select SSB_BLOCKIO
-	default y
-
 config B43_NPHY
 	bool "Pre IEEE 802.11n support (BROKEN)"
 	depends on B43 && EXPERIMENTAL && BROKEN
@@ -137,12 +130,4 @@ config B43_DEBUG
 	  for production use.
 	  Only say Y, if you are debugging a problem in the b43 driver sourcecode.
 
-config B43_FORCE_PIO
-	bool "Force usage of PIO instead of DMA"
-	depends on B43 && B43_DEBUG
-	---help---
-	  This will disable DMA and always enable PIO instead.
 
-	  Say N!
-	  This is only for debugging the PIO engine code. You do
-	  _NOT_ want to enable this.
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 84772a2542dc..5e83b6f0a3a0 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -12,7 +12,7 @@ b43-y				+= xmit.o
 b43-y				+= lo.o
 b43-y				+= wa.o
 b43-y				+= dma.o
-b43-$(CONFIG_B43_PIO)		+= pio.o
+b43-y				+= pio.o
 b43-y				+= rfkill.o
 b43-$(CONFIG_B43_LEDS)		+= leds.o
 b43-$(CONFIG_B43_PCMCIA)	+= pcmcia.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf9491997..2f12a750bc98 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -821,11 +821,9 @@ struct b43_wl {
 	/* The device LEDs. */
 	struct b43_leds leds;
 
-#ifdef CONFIG_B43_PIO
 	/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
 	u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
 	u8 pio_tailspace[4] __attribute__((__aligned__(8)));
-#endif /* CONFIG_B43_PIO */
 };
 
 static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
@@ -876,20 +874,9 @@ static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value)
 
 static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 {
-#ifdef CONFIG_B43_PIO
 	return dev->__using_pio_transfers;
-#else
-	return 0;
-#endif
 }
 
-#ifdef CONFIG_B43_FORCE_PIO
-# define B43_FORCE_PIO	1
-#else
-# define B43_FORCE_PIO	0
-#endif
-
-
 /* Message printing */
 void b43info(struct b43_wl *wl, const char *fmt, ...)
     __attribute__ ((format(printf, 2, 3)));
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 027be275e035..5dd8a210ac21 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1760,7 +1760,6 @@ void b43_dma_tx_resume(struct b43_wldev *dev)
 	b43_power_saving_ctl_bits(dev, 0);
 }
 
-#ifdef CONFIG_B43_PIO
 static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type,
 			   u16 mmio_base, bool enable)
 {
@@ -1794,4 +1793,3 @@ void b43_dma_direct_fifo_rx(struct b43_wldev *dev,
 	mmio_base = b43_dmacontroller_base(type, engine_index);
 	direct_fifo_rx(dev, type, mmio_base, enable);
 }
-#endif /* CONFIG_B43_PIO */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 19b4eae47b59..b0b5ce950008 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -102,6 +102,9 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
 module_param_named(verbose, b43_modparam_verbose, int, 0644);
 MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
 
+static int modparam_pio;
+module_param_named(pio, modparam_pio, int, 0444);
+MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
 
 static const struct ssb_device_id b43_ssb_tbl[] = {
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -1786,8 +1789,8 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
 			       dma_reason[4], dma_reason[5]);
 			b43err(dev->wl, "This device does not support DMA "
 			       "on your system. Please use PIO instead.\n");
-			b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in "
-			       "your kernel configuration.\n");
+			b43err(dev->wl, "Unload the b43 module and reload "
+			       "with 'pio=1'\n");
 			return;
 		}
 		if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -4353,7 +4356,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 
 	if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
 	    (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
-	    B43_FORCE_PIO) {
+	    modparam_pio) {
 		dev->__using_pio_transfers = 1;
 		err = b43_pio_init(dev);
 	} else {
diff --git a/drivers/net/wireless/b43/pio.h b/drivers/net/wireless/b43/pio.h
index 7dd649c9ddad..7b3c42f93a16 100644
--- a/drivers/net/wireless/b43/pio.h
+++ b/drivers/net/wireless/b43/pio.h
@@ -55,8 +55,6 @@
 #define B43_PIO_MAX_NR_TXPACKETS	32
 
 
-#ifdef CONFIG_B43_PIO
-
 struct b43_pio_txpacket {
 	/* Pointer to the TX queue we belong to. */
 	struct b43_pio_txqueue *queue;
@@ -169,42 +167,4 @@ void b43_pio_rx(struct b43_pio_rxqueue *q);
 void b43_pio_tx_suspend(struct b43_wldev *dev);
 void b43_pio_tx_resume(struct b43_wldev *dev);
 
-
-#else /* CONFIG_B43_PIO */
-
-
-static inline int b43_pio_init(struct b43_wldev *dev)
-{
-	return 0;
-}
-static inline void b43_pio_free(struct b43_wldev *dev)
-{
-}
-static inline void b43_pio_stop(struct b43_wldev *dev)
-{
-}
-static inline int b43_pio_tx(struct b43_wldev *dev,
-			     struct sk_buff *skb)
-{
-	return 0;
-}
-static inline void b43_pio_handle_txstatus(struct b43_wldev *dev,
-					   const struct b43_txstatus *status)
-{
-}
-static inline void b43_pio_get_tx_stats(struct b43_wldev *dev,
-					struct ieee80211_tx_queue_stats *stats)
-{
-}
-static inline void b43_pio_rx(struct b43_pio_rxqueue *q)
-{
-}
-static inline void b43_pio_tx_suspend(struct b43_wldev *dev)
-{
-}
-static inline void b43_pio_tx_resume(struct b43_wldev *dev)
-{
-}
-
-#endif /* CONFIG_B43_PIO */
 #endif /* B43_PIO_H_ */
-- 
cgit v1.2.3


From 937a67e75a93b63f0b5d33612901906b8eb2a688 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:40 +0200
Subject: wl1271: updated radio parameters structure for newer firmwares

In revision 6.1.0.0.288 the radio parameters structure has changed.  This
patch updates the driver code accordingly.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.h | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index b4fa4acb9229..de23c08738a0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -458,11 +458,12 @@ struct wl1271_radio_parms_cmd {
 	/* Dynamic radio parameters */
 	/* 2.4GHz */
 	__le16 tx_ref_pd_voltage;
-	s8  tx_ref_power;
+	u8  tx_ref_power;
 	s8  tx_offset_db;
 
 	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
 	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
 
 	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
 	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
@@ -471,15 +472,19 @@ struct wl1271_radio_parms_cmd {
 	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
 	u8  rx_fem_insertion_loss;
 
-	u8 padding2;
+	u8  degraded_low_to_normal_threshold;
+	u8  degraded_normal_to_high_threshold;
+
+	u8  padding1; /* our own padding, not in ref driver */
 
 	/* 5GHz */
 	__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
 	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
 
 	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
 	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
 
 	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
 	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
@@ -488,7 +493,10 @@ struct wl1271_radio_parms_cmd {
 	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
 	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
 
-	u8 padding3[2];
+	u8  degraded_low_to_normal_threshold_5;
+	u8  degraded_normal_to_high_threshold_5;
+
+	u8 padding2[2];
 } __attribute__ ((packed));
 
 struct wl1271_cmd_cal_channel_tune {
-- 
cgit v1.2.3


From 76c0f8d396bd306111d349cfe770e1c4fcf70248 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:41 +0200
Subject: wl1271: updated general parameters structure for newer firmwares

In revision 6.1.0.0.288 the general parameters structure has changed.  This
patch updates the driver code accordingly.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c  | 20 ++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_cmd.h  | 15 +++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_conf.h | 17 +++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_main.c | 13 +++++++++++++
 4 files changed, 65 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 886a9bc39cc1..fe9b187f476e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -209,6 +209,26 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
 	gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
 	gen_parms->settings = g->settings;
 
+	gen_parms->sr_state = g->sr_state;
+
+	memcpy(gen_parms->srf1,
+	       g->srf1,
+	       CONF_MAX_SMART_REFLEX_PARAMS);
+	memcpy(gen_parms->srf2,
+	       g->srf2,
+	       CONF_MAX_SMART_REFLEX_PARAMS);
+	memcpy(gen_parms->srf3,
+	       g->srf3,
+	       CONF_MAX_SMART_REFLEX_PARAMS);
+	memcpy(gen_parms->sr_debug_table,
+	       g->sr_debug_table,
+	       CONF_MAX_SMART_REFLEX_PARAMS);
+
+	gen_parms->sr_sen_n_p = g->sr_sen_n_p;
+	gen_parms->sr_sen_n_p_gain = g->sr_sen_n_p_gain;
+	gen_parms->sr_sen_nrn = g->sr_sen_nrn;
+	gen_parms->sr_sen_prn = g->sr_sen_prn;
+
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
 	if (ret < 0)
 		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index de23c08738a0..057f925db2aa 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -437,6 +437,21 @@ struct wl1271_general_parms_cmd {
 	u8 tx_bip_fem_autodetect;
 	u8 tx_bip_fem_manufacturer;
 	u8 settings;
+
+	u8 sr_state;
+
+	s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
+	s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
+	s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
+
+	s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
+
+	u8 sr_sen_n_p;
+	u8 sr_sen_n_p_gain;
+	u8 sr_sen_nrn;
+	u8 sr_sen_prn;
+
+	u8 padding[3];
 } __attribute__ ((packed));
 
 struct wl1271_radio_parms_cmd {
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 565373ede265..5e36cd90d0c6 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -759,6 +759,9 @@ enum single_dual_band_enum {
 	CONF_DUAL_BAND
 };
 
+
+#define CONF_MAX_SMART_REFLEX_PARAMS 16
+
 struct conf_general_parms {
 	/*
 	 * RF Reference Clock type / speed
@@ -815,6 +818,20 @@ struct conf_general_parms {
 	 * Range: Unknown
 	 */
 	u8 settings;
+
+	/* Smart reflex settings */
+	u8 sr_state;
+
+	s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
+	s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
+	s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
+
+	s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
+
+	u8 sr_sen_n_p;
+	u8 sr_sen_n_p_gain;
+	u8 sr_sen_nrn;
+	u8 sr_sen_prn;
 };
 
 #define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b62c00ff42fe..7ab45c446ab8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -259,6 +259,19 @@ static struct conf_drv_settings default_conf = {
 			.tx_bip_fem_autodetect = 0,
 			.tx_bip_fem_manufacturer = 1,
 			.settings = 1,
+			.sr_state = 1,
+			.srf1 = { 0, 0, 0, 0, 0, 0, 0, 0,
+				  0, 0, 0, 0, 0, 0, 0, 0 },
+			.srf2 = { 0, 0, 0, 0, 0, 0, 0, 0,
+				  0, 0, 0, 0, 0, 0, 0, 0 },
+			.srf3 = { 0, 0, 0, 0, 0, 0, 0, 0,
+				  0, 0, 0, 0, 0, 0, 0, 0 },
+			.sr_debug_table = { 0, 0, 0, 0, 0, 0, 0, 0,
+					    0, 0, 0, 0, 0, 0, 0, 0 },
+			.sr_sen_n_p = 0,
+			.sr_sen_n_p_gain = 0,
+			.sr_sen_nrn = 0,
+			.sr_sen_prn = 0,
 		},
 		.radioparam = {
 			.rx_trace_loss       = 10,
-- 
cgit v1.2.3


From a3e84847b042f10262f8ef66db66a0e527a00cff Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:42 +0200
Subject: wl1271: update radio and general parameters values

There were some changes in the values we have to use for these settings.  This
patches updates them.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 7ab45c446ab8..1d5b73ca23b7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -256,7 +256,7 @@ static struct conf_drv_settings default_conf = {
 			.clk_valid_on_wakeup = 0,
 			.dc2dcmode           = 0,
 			.single_dual_band    = CONF_SINGLE_BAND,
-			.tx_bip_fem_autodetect = 0,
+			.tx_bip_fem_autodetect = 1,
 			.tx_bip_fem_manufacturer = 1,
 			.settings = 1,
 			.sr_state = 1,
@@ -274,8 +274,8 @@ static struct conf_drv_settings default_conf = {
 			.sr_sen_prn = 0,
 		},
 		.radioparam = {
-			.rx_trace_loss       = 10,
-			.tx_trace_loss       = 10,
+			.rx_trace_loss       = 0x24,
+			.tx_trace_loss       = 0x0,
 			.rx_rssi_and_proc_compens = {
 				0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
 				0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
@@ -286,13 +286,13 @@ static struct conf_drv_settings default_conf = {
 				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 				0x00, 0x00, 0x00 },
-			.tx_ref_pd_voltage   = 0x24e,
-			.tx_ref_power        = 0x78,
+			.tx_ref_pd_voltage   = 0x1a9,
+			.tx_ref_power        = 0x80,
 			.tx_offset_db        = 0x0,
 			.tx_rate_limits_normal = {
-				0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+				0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
 			.tx_rate_limits_degraded = {
-				0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+				0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
 			.tx_channel_limits_11b = {
 				0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
 				0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
@@ -302,10 +302,10 @@ static struct conf_drv_settings default_conf = {
 				0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
 				0x20, 0x50 },
 			.tx_pdv_rate_offsets = {
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+				0x07, 0x08, 0x04, 0x02, 0x02, 0x00 },
 			.tx_ibias            = {
-				0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
-			.rx_fem_insertion_loss = 0x14,
+				0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
+			.rx_fem_insertion_loss = 0x0e,
 			.tx_ref_pd_voltage_5 = {
 				0x0190, 0x01a4, 0x01c3, 0x01d8,
 				0x020a, 0x021c },
-- 
cgit v1.2.3


From cf18be4467b5aca1ccf3b5a72b67fc33a0b30c59 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:43 +0200
Subject: wl1271: added radio parameters configuration values newer firmwares

Add new radio parameters for new structures based on firmware revision
6.1.0.0.288.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c  | 13 +++++++++++++
 drivers/net/wireless/wl12xx/wl1271_conf.h | 17 +++++++++++++----
 drivers/net/wireless/wl12xx/wl1271_main.c | 10 +++++++++-
 3 files changed, 35 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index fe9b187f476e..57c21454e543 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -273,6 +273,8 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	       CONF_NUMBER_OF_RATE_GROUPS);
 	memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
 	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_extreme, r->tx_rate_limits_extreme,
+	       CONF_NUMBER_OF_RATE_GROUPS);
 
 	memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
 	       CONF_NUMBER_OF_CHANNELS_2_4);
@@ -283,6 +285,11 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
 
 	radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
+	radio_parms->degraded_low_to_normal_threshold =
+		r->degraded_low_to_normal_threshold;
+	radio_parms->degraded_normal_to_high_threshold =
+		r->degraded_normal_to_high_threshold;
+
 
 	for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
 		radio_parms->tx_ref_pd_voltage_5[i] =
@@ -295,6 +302,8 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	       r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
 	memcpy(radio_parms->tx_rate_limits_degraded_5,
 	       r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_extreme_5,
+	       r->tx_rate_limits_extreme_5, CONF_NUMBER_OF_RATE_GROUPS);
 	memcpy(radio_parms->tx_channel_limits_ofdm_5,
 	       r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
 	memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
@@ -303,6 +312,10 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	       CONF_NUMBER_OF_RATE_GROUPS);
 	memcpy(radio_parms->rx_fem_insertion_loss_5,
 	       r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
+	radio_parms->degraded_low_to_normal_threshold_5 =
+		r->degraded_low_to_normal_threshold_5;
+	radio_parms->degraded_normal_to_high_threshold_5 =
+		r->degraded_normal_to_high_threshold_5;
 
 	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
 		    radio_parms, sizeof(*radio_parms));
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 5e36cd90d0c6..a4bd35b0f9fd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -864,12 +864,13 @@ struct conf_radio_parms {
 	 *
 	 * Range: unknown
 	 */
-	s16 tx_ref_pd_voltage;
-	s8  tx_ref_power;
+	u16 tx_ref_pd_voltage;
+	u8  tx_ref_power;
 	s8  tx_offset_db;
 
 	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
 	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
 
 	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
 	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
@@ -878,17 +879,22 @@ struct conf_radio_parms {
 	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
 	u8  rx_fem_insertion_loss;
 
+	u8  degraded_low_to_normal_threshold;
+	u8  degraded_normal_to_high_threshold;
+
+
 	/*
 	 * Dynamic radio parameters for 5GHz
 	 *
 	 * Range: unknown
 	 */
-	s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
 	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
 
 	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
 	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
 
 	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
 	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
@@ -896,6 +902,9 @@ struct conf_radio_parms {
 	/* FIXME: this is inconsistent with the types for 2.4GHz */
 	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
 	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	u8  degraded_low_to_normal_threshold_5;
+	u8  degraded_normal_to_high_threshold_5;
 };
 
 #define CONF_SR_ERR_TBL_COUNT        3
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 1d5b73ca23b7..f1cb7cbd7c1c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -293,6 +293,8 @@ static struct conf_drv_settings default_conf = {
 				0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
 			.tx_rate_limits_degraded = {
 				0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
+			.tx_rate_limits_extreme = {
+				0x19, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
 			.tx_channel_limits_11b = {
 				0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
 				0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
@@ -306,6 +308,8 @@ static struct conf_drv_settings default_conf = {
 			.tx_ibias            = {
 				0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
 			.rx_fem_insertion_loss = 0x0e,
+			.degraded_low_to_normal_threshold = 0x1e,
+			.degraded_normal_to_high_threshold = 0x2d,
 			.tx_ref_pd_voltage_5 = {
 				0x0190, 0x01a4, 0x01c3, 0x01d8,
 				0x020a, 0x021c },
@@ -317,6 +321,8 @@ static struct conf_drv_settings default_conf = {
 				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
 			.tx_rate_limits_degraded_5 = {
 				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+			.tx_rate_limits_extreme_5 = {
+				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
 			.tx_channel_limits_ofdm_5 = {
 				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
 				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
@@ -328,7 +334,9 @@ static struct conf_drv_settings default_conf = {
 			.tx_ibias_5          = {
 				0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
 			.rx_fem_insertion_loss_5 = {
-				0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 }
+				0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
+			.degraded_low_to_normal_threshold_5 = 0x00,
+			.degraded_normal_to_high_threshold_5 = 0x00
 		}
 	}
 };
-- 
cgit v1.2.3


From c7f43e451ba40e66a89d51e63bc21a57824592f2 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:44 +0200
Subject: wl1271: use join command with dummy BSSID

When we need to change the channel before association, we have to send a join
command with a valid BSSID.  With this patch we use 0baddeadbeef as the
BSSID.  There are ongoing discussions with TI to get this done in a cleaner
way.

When we go back to idle, we issue a CMD_DISCONNECT to make sure the firmware
stops listening to the channel and cleans things up internally.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 75 ++++++++++++++++++++++++++-----
 1 file changed, 65 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index f1cb7cbd7c1c..f6d42e613a56 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1130,6 +1130,47 @@ out:
 }
 #endif
 
+static int wl1271_join_channel(struct wl1271 *wl, int channel)
+{
+	int ret;
+	/* we need to use a dummy BSSID for now */
+	static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
+						  0xad, 0xbe, 0xef };
+
+	/* disable mac filter, so we hear everything */
+	wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+
+	wl->channel = channel;
+	memcpy(wl->bssid, dummy_bssid, ETH_ALEN);
+
+	ret = wl1271_cmd_join(wl);
+	if (ret < 0)
+		goto out;
+
+	wl->joined = true;
+
+out:
+	return ret;
+}
+
+static int wl1271_unjoin_channel(struct wl1271 *wl)
+{
+	int ret;
+
+	/* to stop listening to a channel, we disconnect */
+	ret = wl1271_cmd_disconnect(wl);
+	if (ret < 0)
+		goto out;
+
+	wl->joined = false;
+	wl->channel = 0;
+	memset(wl->bssid, 0, ETH_ALEN);
+	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+
+out:
+	return ret;
+}
+
 static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct wl1271 *wl = hw->priv;
@@ -1138,10 +1179,11 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 
 	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
 
-	wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+	wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s",
 		     channel,
 		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
-		     conf->power_level);
+		     conf->power_level,
+		     conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use");
 
 	mutex_lock(&wl->mutex);
 
@@ -1151,16 +1193,17 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (ret < 0)
 		goto out;
 
-	if (channel != wl->channel) {
-		/*
-		 * We assume that the stack will configure the right channel
-		 * before associating, so we don't need to send a join
-		 * command here.  We will join the right channel when the
-		 * BSSID changes
-		 */
-		wl->channel = channel;
+	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+		if (conf->flags & IEEE80211_CONF_IDLE && wl->joined)
+			wl1271_unjoin_channel(wl);
+		else
+			wl1271_join_channel(wl, channel);
 	}
 
+	/* if the channel changes while joined, join again */
+	if (channel != wl->channel && wl->joined)
+		wl1271_join_channel(wl, channel);
+
 	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
 		wl1271_info("psm enabled");
 
@@ -1494,6 +1537,18 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out;
 
+	if ((changed & BSS_CHANGED_BSSID) &&
+	    /*
+	     * Now we know the correct bssid, so we send a new join command
+	     * and enable the BSSID filter
+	     */
+	    memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
+			wl->rx_config |= CFG_BSSID_FILTER_EN;
+			memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+			wl1271_cmd_join(wl);
+			wl->joined = true;
+	}
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
-- 
cgit v1.2.3


From 9cf25fed6a3b1c0792cbab3e934a4e2b6736d284 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:45 +0200
Subject: wl1271: remove workaround for disconnection

Now we're using a the idle information coming from mac80211 to decide when to
disconnect.  If we have joined (ie. we're listening to a channel), whenever
the interface goes to idle, we will issue a disconnect command.  So the
workaround to send a disconnect command before joining is not needed anymore.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 57c21454e543..ceb1ca63c43a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -344,19 +344,6 @@ int wl1271_cmd_join(struct wl1271 *wl)
 			do_cal = false;
 	}
 
-	/* FIXME: This is a workaround, because with the current stack, we
-	 * cannot know when we have disassociated.  So, if we have already
-	 * joined, we disconnect before joining again. */
-	if (wl->joined) {
-		ret = wl1271_cmd_disconnect(wl);
-		if (ret < 0) {
-			wl1271_error("failed to disconnect before rejoining");
-			goto out;
-		}
-
-		wl->joined = false;
-	}
-
 	join = kzalloc(sizeof(*join), GFP_KERNEL);
 	if (!join) {
 		ret = -ENOMEM;
@@ -421,8 +408,6 @@ int wl1271_cmd_join(struct wl1271 *wl)
 		goto out_free;
 	}
 
-	wl->joined = true;
-
 	/*
 	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
 	 * simplify locking we just sleep instead, for now
-- 
cgit v1.2.3


From a2d0e3f13037fa7dc4094c47e0378800a064ee26 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:46 +0200
Subject: wl1271: limit TX power to 25dBm for every channel

The wl1271 firmware supports maximun 25.5dBm, so the driver was returning
-EINVALID to anything above that.  This patch uses the channel max_power
option to limit the TX power to 25dBm.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index f6d42e613a56..7f164e532211 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1675,19 +1675,19 @@ static struct ieee80211_rate wl1271_rates[] = {
 
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_channel wl1271_channels[] = {
-	{ .hw_value = 1, .center_freq = 2412},
-	{ .hw_value = 2, .center_freq = 2417},
-	{ .hw_value = 3, .center_freq = 2422},
-	{ .hw_value = 4, .center_freq = 2427},
-	{ .hw_value = 5, .center_freq = 2432},
-	{ .hw_value = 6, .center_freq = 2437},
-	{ .hw_value = 7, .center_freq = 2442},
-	{ .hw_value = 8, .center_freq = 2447},
-	{ .hw_value = 9, .center_freq = 2452},
-	{ .hw_value = 10, .center_freq = 2457},
-	{ .hw_value = 11, .center_freq = 2462},
-	{ .hw_value = 12, .center_freq = 2467},
-	{ .hw_value = 13, .center_freq = 2472},
+	{ .hw_value = 1, .center_freq = 2412, .max_power = 25 },
+	{ .hw_value = 2, .center_freq = 2417, .max_power = 25 },
+	{ .hw_value = 3, .center_freq = 2422, .max_power = 25 },
+	{ .hw_value = 4, .center_freq = 2427, .max_power = 25 },
+	{ .hw_value = 5, .center_freq = 2432, .max_power = 25 },
+	{ .hw_value = 6, .center_freq = 2437, .max_power = 25 },
+	{ .hw_value = 7, .center_freq = 2442, .max_power = 25 },
+	{ .hw_value = 8, .center_freq = 2447, .max_power = 25 },
+	{ .hw_value = 9, .center_freq = 2452, .max_power = 25 },
+	{ .hw_value = 10, .center_freq = 2457, .max_power = 25 },
+	{ .hw_value = 11, .center_freq = 2462, .max_power = 25 },
+	{ .hw_value = 12, .center_freq = 2467, .max_power = 25 },
+	{ .hw_value = 13, .center_freq = 2472, .max_power = 25 },
 };
 
 /* can't be const, mac80211 writes to this */
-- 
cgit v1.2.3


From cd264769f7a571fc2a61765757ed85c56f02e9d3 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:47 +0200
Subject: wl1271: check result code from the join command

We were not checking the return value from the call to wl1271_cmd_join().
Added a check to make things more reliable.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 7f164e532211..bf1d0fd93bcc 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1545,7 +1545,11 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	    memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
 			wl->rx_config |= CFG_BSSID_FILTER_EN;
 			memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
-			wl1271_cmd_join(wl);
+			ret = wl1271_cmd_join(wl);
+			if (ret < 0) {
+				wl1271_warning("cmd join failed %d", ret);
+				goto out_sleep;
+			}
 			wl->joined = true;
 	}
 
-- 
cgit v1.2.3


From bdcbbb947be9778f740797a2bfc69c44a0d54776 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:48 +0200
Subject: wl1271: set null data template when BSSID is known

The call to wl1271_cmd_build_null_data() was missing when we got associated,
this was causing PS to fail.  This patch adds the call and now PS seems to
work.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index bf1d0fd93bcc..64f8623e0325 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1545,6 +1545,12 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	    memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
 			wl->rx_config |= CFG_BSSID_FILTER_EN;
 			memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+			ret = wl1271_cmd_build_null_data(wl);
+			if (ret < 0) {
+				wl1271_warning("cmd buld null data failed %d",
+					       ret);
+				goto out_sleep;
+			}
 			ret = wl1271_cmd_join(wl);
 			if (ret < 0) {
 				wl1271_warning("cmd join failed %d", ret);
-- 
cgit v1.2.3


From ac9b40fac6983ab30e8b5019a5d2abda200c89d5 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:49 +0200
Subject: wl1271: use the correct macro when setting the basic rates

We were using CONF_TX_RATE_MASK_ALL when calling wl1271_acx_rate_policies()
during init.  We should use WL1271_DEFAULT_BASIC_RATE_SET instead.  The
values are the same, but the latter is just the correct macro to use.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 11249b436cf1..d72ccc68b855 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -280,7 +280,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Configure TX rate classes */
-	ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_ALL);
+	ret = wl1271_acx_rate_policies(wl, WL1271_DEFAULT_BASIC_RATE_SET);
 	if (ret < 0)
 		goto out_free_memmap;
 
-- 
cgit v1.2.3


From 6e92b416b0aa6a59629cc32ee2b27129d73b98b8 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:50 +0200
Subject: wl1271: implement dco itrim parameters setting

Newer firmwares require the dco itrim parameters to be set during
initialization.  This patch implements the new ACX function and calls it.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.c  | 29 +++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_acx.h  | 10 ++++++++++
 drivers/net/wireless/wl12xx/wl1271_conf.h |  9 +++++++++
 drivers/net/wireless/wl12xx/wl1271_init.c |  4 ++++
 drivers/net/wireless/wl12xx/wl1271_main.c |  4 ++++
 5 files changed, 56 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 5cc89bbdac7a..a38a967ba78a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -390,6 +390,35 @@ out:
 	return ret;
 }
 
+int wl1271_acx_dco_itrim_params(struct wl1271 *wl)
+{
+	struct acx_dco_itrim_params *dco;
+	struct conf_itrim_settings *c = &wl->conf.itrim;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx dco itrim parameters");
+
+	dco = kzalloc(sizeof(*dco), GFP_KERNEL);
+	if (!dco) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	dco->enable = c->enable;
+	dco->timeout = cpu_to_le32(c->timeout);
+
+	ret = wl1271_cmd_configure(wl, ACX_SET_DCO_ITRIM_PARAMS,
+				   dco, sizeof(*dco));
+	if (ret < 0) {
+		wl1271_warning("failed to set dco itrim parameters: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(dco);
+	return ret;
+}
+
 int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter)
 {
 	struct acx_beacon_filter_option *beacon_filter = NULL;
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 2ce0a8128542..fa5d9539440d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -434,6 +434,14 @@ struct acx_smart_reflex_config_params {
 	struct smart_reflex_err_table error_table[3];
 } __attribute__ ((packed));
 
+struct acx_dco_itrim_params {
+	struct acx_header header;
+
+	u8 enable;
+	u8 padding[3];
+	__le32 timeout;
+} __attribute__ ((packed));
+
 #define PTA_ANTENNA_TYPE_DEF		  (0)
 #define PTA_BT_HP_MAXTIME_DEF		  (2000)
 #define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
@@ -1029,6 +1037,7 @@ enum {
 	ACX_SET_SMART_REFLEX_DEBUG  = 0x005A,
 	ACX_SET_SMART_REFLEX_STATE  = 0x005B,
 	ACX_SET_SMART_REFLEX_PARAMS = 0x005F,
+	ACX_SET_DCO_ITRIM_PARAMS    = 0x0061,
 	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
 	DOT11_CUR_TX_PWR            = 0x100D,
 	DOT11_RX_DOT11_MODE         = 0x1012,
@@ -1056,6 +1065,7 @@ int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
 				 void *mc_list, u32 mc_list_len);
 int wl1271_acx_service_period_timeout(struct wl1271 *wl);
 int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
+int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
 int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
 int wl1271_acx_conn_monit_params(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index a4bd35b0f9fd..905d4287915b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -934,12 +934,21 @@ struct conf_init_settings {
 
 };
 
+struct conf_itrim_settings {
+	/* enable dco itrim */
+	u8 enable;
+
+	/* moderation timeout in microsecs from the last TX */
+	u32 timeout;
+};
+
 struct conf_drv_settings {
 	struct conf_sg_settings sg;
 	struct conf_rx_settings rx;
 	struct conf_tx_settings tx;
 	struct conf_conn_settings conn;
 	struct conf_init_settings init;
+	struct conf_itrim_settings itrim;
 };
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index d72ccc68b855..39f01d875703 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -229,6 +229,10 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		goto out_free_memmap;
 
+	ret = wl1271_acx_dco_itrim_params(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	/* Initialize connection monitoring thresholds */
 	ret = wl1271_acx_conn_monit_params(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 64f8623e0325..8c44f4cd688d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -338,6 +338,10 @@ static struct conf_drv_settings default_conf = {
 			.degraded_low_to_normal_threshold_5 = 0x00,
 			.degraded_normal_to_high_threshold_5 = 0x00
 		}
+	},
+	.itrim = {
+		.enable = false,
+		.timeout = 50000,
 	}
 };
 
-- 
cgit v1.2.3


From 1b38ea8858fd169064683e27add43511308e521a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:51 +0200
Subject: wl1271: fix one typo in the rx_rssi_and_proc_compens values

There was a typo in one of the values in the rx_rssi_and_proc_compens elemt
of the Radio Parameters struct.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 8c44f4cd688d..147aab222354 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -278,7 +278,7 @@ static struct conf_drv_settings default_conf = {
 			.tx_trace_loss       = 0x0,
 			.rx_rssi_and_proc_compens = {
 				0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
-				0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
+				0xfc, 0x00, 0x80, 0x10, 0xf0, 0xf8,
 				0x00, 0x0a, 0x14 },
 			.rx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
 			.tx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
-- 
cgit v1.2.3


From 98b2a68473ae975bc4abdeb66cd719ccfdad9d4a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:52 +0200
Subject: wl1271: add gpio_power file in debugfs to power the chip on and off

Some debugging tools require the chip to be powered on before they can work.
With these tools, we shouldn't upload the firmware nor boot the firmware
ourselves, so this debufs file is provided.  It always contains the gpio
power setting (0 = off, 1 = on).  To change the power setting, just write 0
or 1 to the file.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h         |  3 ++
 drivers/net/wireless/wl12xx/wl1271_debugfs.c | 55 ++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_main.c    |  3 ++
 3 files changed, 61 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 94359b1a861f..3bec6f3b1c7f 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -276,6 +276,7 @@ struct wl1271_debugfs {
 
 	struct dentry *retry_count;
 	struct dentry *excessive_retries;
+	struct dentry *gpio_power;
 };
 
 #define NUM_TX_QUEUES              4
@@ -442,6 +443,8 @@ struct wl1271 {
 	struct conf_drv_settings conf;
 
 	struct list_head list;
+
+	bool gpio_power;
 };
 
 int wl1271_plt_start(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
index c1805e5f8964..4eaf40c57567 100644
--- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c
+++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
@@ -237,6 +237,57 @@ static const struct file_operations tx_queue_len_ops = {
 	.open = wl1271_open_file_generic,
 };
 
+static ssize_t gpio_power_read(struct file *file, char __user *user_buf,
+			  size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	int res;
+	char buf[10];
+
+	res = scnprintf(buf, sizeof(buf), "%d\n", wl->gpio_power);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static ssize_t gpio_power_write(struct file *file,
+			   const char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	char buf[10];
+	size_t len;
+	unsigned long value;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len)) {
+		ret = -EFAULT;
+		goto out;
+	}
+	buf[len] = '\0';
+
+	ret = strict_strtoul(buf, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value in gpio_power");
+		goto out;
+	}
+
+	wl->set_power(!!value);
+	wl->gpio_power = !!value;
+
+out:
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations gpio_power_ops = {
+	.read = gpio_power_read,
+	.write = gpio_power_write,
+	.open = wl1271_open_file_generic
+};
+
 static void wl1271_debugfs_delete_files(struct wl1271 *wl)
 {
 	DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
@@ -333,6 +384,8 @@ static void wl1271_debugfs_delete_files(struct wl1271 *wl)
 	DEBUGFS_DEL(tx_queue_len);
 	DEBUGFS_DEL(retry_count);
 	DEBUGFS_DEL(excessive_retries);
+
+	DEBUGFS_DEL(gpio_power);
 }
 
 static int wl1271_debugfs_add_files(struct wl1271 *wl)
@@ -434,6 +487,8 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl)
 	DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
 	DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
 
+	DEBUGFS_ADD(gpio_power, wl->debugfs.rootdir);
+
 out:
 	if (ret < 0)
 		wl1271_debugfs_delete_files(wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 147aab222354..b33bdcc1eb4e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -399,11 +399,13 @@ static void wl1271_disable_interrupts(struct wl1271 *wl)
 static void wl1271_power_off(struct wl1271 *wl)
 {
 	wl->set_power(false);
+	wl->gpio_power = false;
 }
 
 static void wl1271_power_on(struct wl1271 *wl)
 {
 	wl->set_power(true);
+	wl->gpio_power = true;
 }
 
 static void wl1271_fw_status(struct wl1271 *wl,
@@ -1923,6 +1925,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	wl->band = IEEE80211_BAND_2GHZ;
 	wl->vif = NULL;
 	wl->joined = false;
+	wl->gpio_power = false;
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
-- 
cgit v1.2.3


From 8cf5e8e509950237fa0982235a703348d8b6e670 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:53 +0200
Subject: wl1271: upload only the first 468 bytes from the NVS file

We were uploading the whole NVS file, but that is wrong, because the same
file also contains the initialization values.  For the latest firmwares, we
should upload only the initial 468 bytes from the file.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      | 1 +
 drivers/net/wireless/wl12xx/wl1271_boot.c | 8 +++++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 3bec6f3b1c7f..8dfc9ec9590d 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -111,6 +111,7 @@ enum {
 
 #define WL1271_FW_NAME "wl1271-fw.bin"
 #define WL1271_NVS_NAME "wl1271-nvs.bin"
+#define WL1271_NVS_LEN  468
 
 /*
  * Enable/disable 802.11a support for WL1273
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index b7c96454cca3..e803b876f3f0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -225,9 +225,15 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	if (nvs == NULL)
 		return -ENODEV;
 
+	if (wl->nvs_len < WL1271_NVS_LEN)
+		return -EINVAL;
+
 	nvs_ptr = nvs;
 
-	nvs_len = wl->nvs_len;
+	/* only the first part of the NVS needs to be uploaded */
+	nvs_len = WL1271_NVS_LEN;
+
+	/* FIXME: read init settings from the remaining part of the NVS */
 
 	/* Update the device MAC address into the nvs */
 	nvs[11] = wl->mac_addr[0];
-- 
cgit v1.2.3


From 3ed8f2c61466f10d99585365fd2aaafaf2d4c949 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:54 +0200
Subject: wl1271: some new configuration values according to new reference

In the new reference driver, some of the firmware configuration values have
been changed.  This patch changes them in the wl1271 driver accordingly.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.h  |  4 ++--
 drivers/net/wireless/wl12xx/wl1271_main.c | 16 ++++++++--------
 2 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index fa5d9539440d..dcd64b7919eb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -885,8 +885,8 @@ struct acx_tx_config_options {
 	__le16 tx_compl_threshold;   /* number of packets */
 } __attribute__ ((packed));
 
-#define ACX_RX_MEM_BLOCKS     64
-#define ACX_TX_MIN_MEM_BLOCKS 64
+#define ACX_RX_MEM_BLOCKS     70
+#define ACX_TX_MIN_MEM_BLOCKS 40
 #define ACX_TX_DESCRIPTORS    32
 #define ACX_NUM_SSID_PROFILES 1
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b33bdcc1eb4e..fb2221749f7b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -67,10 +67,10 @@ static struct conf_drv_settings default_conf = {
 		.ps_poll_timeout             = 15,
 		.upsd_timeout                = 15,
 		.rts_threshold               = 2347,
-		.rx_cca_threshold            = 0xFFEF,
-		.irq_blk_threshold           = 0,
-		.irq_pkt_threshold           = USHORT_MAX,
-		.irq_timeout                 = 5,
+		.rx_cca_threshold            = 0,
+		.irq_blk_threshold           = 0xFFFF,
+		.irq_pkt_threshold           = 0,
+		.irq_timeout                 = 600,
 		.queue_type                  = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
 	},
 	.tx = {
@@ -172,8 +172,8 @@ static struct conf_drv_settings default_conf = {
 			}
 		},
 		.frag_threshold              = IEEE80211_MAX_FRAG_THRESHOLD,
-		.tx_compl_timeout            = 5,
-		.tx_compl_threshold          = 5
+		.tx_compl_timeout            = 700,
+		.tx_compl_threshold          = 4
 	},
 	.conn = {
 		.wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
@@ -186,12 +186,12 @@ static struct conf_drv_settings default_conf = {
 				.rule        = CONF_BCN_RULE_PASS_ON_APPEARANCE,
 			}
 		},
-		.synch_fail_thold            = 5,
+		.synch_fail_thold            = 10,
 		.bss_lose_timeout            = 100,
 		.beacon_rx_timeout           = 10000,
 		.broadcast_timeout           = 20000,
 		.rx_broadcast_in_ps          = 1,
-		.ps_poll_threshold           = 4,
+		.ps_poll_threshold           = 20,
 		.sig_trigger_count           = 2,
 		.sig_trigger = {
 			[0] = {
-- 
cgit v1.2.3


From 94210897e2b7df8446fdecd360342149e5b4a400 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Fri, 11 Dec 2009 15:40:55 +0200
Subject: wl1271: use channel 1 when configuring the data path

In the data path configuration, one of the parameters is the channel.  We
have been setting it to wl->channel, which is not correct in this case.  This
channel has nothing to do with the channel we're currently tuned to, since it
is only used for calibration during this phase.  Hardcoded the channel to 1,
according to the reference driver.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c  | 13 +++++++------
 drivers/net/wireless/wl12xx/wl1271_cmd.h  |  2 +-
 drivers/net/wireless/wl12xx/wl1271_init.c |  2 +-
 drivers/net/wireless/wl12xx/wl1271_main.c |  2 +-
 4 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index ceb1ca63c43a..20f3e67c8e48 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -505,7 +505,7 @@ int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
 	return 0;
 }
 
-int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
+int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
 {
 	struct cmd_enabledisable_path *cmd;
 	int ret;
@@ -519,7 +519,8 @@ int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
 		goto out;
 	}
 
-	cmd->channel = channel;
+	/* the channel here is only used for calibration, so hardcoded to 1 */
+	cmd->channel = 1;
 
 	if (enable) {
 		cmd_rx = CMD_ENABLE_RX;
@@ -532,22 +533,22 @@ int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
 	ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("rx %s cmd for channel %d failed",
-			     enable ? "start" : "stop", channel);
+			     enable ? "start" : "stop", cmd->channel);
 		goto out;
 	}
 
 	wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
-		     enable ? "start" : "stop", channel);
+		     enable ? "start" : "stop", cmd->channel);
 
 	ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("tx %s cmd for channel %d failed",
-			     enable ? "start" : "stop", channel);
+			     enable ? "start" : "stop", cmd->channel);
 		return ret;
 	}
 
 	wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
-		     enable ? "start" : "stop", channel);
+		     enable ? "start" : "stop", cmd->channel);
 
 out:
 	kfree(cmd);
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 057f925db2aa..09fe91297acf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -37,7 +37,7 @@ int wl1271_cmd_join(struct wl1271 *wl);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
 int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
-int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable);
+int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
 int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode);
 int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
 			   size_t len);
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 39f01d875703..bdd4a968b37d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -289,7 +289,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Enable data path */
-	ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+	ret = wl1271_cmd_data_path(wl, 1);
 	if (ret < 0)
 		goto out_free_memmap;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index fb2221749f7b..55a45d339184 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -384,7 +384,7 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+	ret = wl1271_cmd_data_path(wl, 1);
 	if (ret < 0)
 		return ret;
 
-- 
cgit v1.2.3


From 149e38789f3fea74b581f8ebb7eb947d3c6d8a4e Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:40:56 +0200
Subject: wl1271: Configure smart-reflex paramter values.

Configure correct values to be used with the smart-reflex configuration of the
firmware.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 55a45d339184..b0f4c6efa415 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -260,12 +260,12 @@ static struct conf_drv_settings default_conf = {
 			.tx_bip_fem_manufacturer = 1,
 			.settings = 1,
 			.sr_state = 1,
-			.srf1 = { 0, 0, 0, 0, 0, 0, 0, 0,
-				  0, 0, 0, 0, 0, 0, 0, 0 },
-			.srf2 = { 0, 0, 0, 0, 0, 0, 0, 0,
-				  0, 0, 0, 0, 0, 0, 0, 0 },
-			.srf3 = { 0, 0, 0, 0, 0, 0, 0, 0,
-				  0, 0, 0, 0, 0, 0, 0, 0 },
+			.srf1 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+			.srf2 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+			.srf3 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
 			.sr_debug_table = { 0, 0, 0, 0, 0, 0, 0, 0,
 					    0, 0, 0, 0, 0, 0, 0, 0 },
 			.sr_sen_n_p = 0,
-- 
cgit v1.2.3


From 018b171c40b613da867e054f9b6b258ae9298133 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:40:57 +0200
Subject: wl1271: Remove smart reflex ACX

Remove the smart-reflex ACX - the associated parameters are now configured
in the radio parameters config.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.c  | 53 -------------------------------
 drivers/net/wireless/wl12xx/wl1271_acx.h  | 21 ------------
 drivers/net/wireless/wl12xx/wl1271_conf.h | 39 -----------------------
 drivers/net/wireless/wl12xx/wl1271_init.c |  5 ---
 drivers/net/wireless/wl12xx/wl1271_main.c | 24 --------------
 5 files changed, 142 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index a38a967ba78a..ea6427ad1bcb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -1041,59 +1041,6 @@ out:
 	return ret;
 }
 
-int wl1271_acx_smart_reflex(struct wl1271 *wl)
-{
-	struct acx_smart_reflex_state *sr_state = NULL;
-	struct acx_smart_reflex_config_params *sr_param = NULL;
-	int i, ret;
-
-	wl1271_debug(DEBUG_ACX, "acx smart reflex");
-
-	sr_param = kzalloc(sizeof(*sr_param), GFP_KERNEL);
-	if (!sr_param) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	for (i = 0; i < CONF_SR_ERR_TBL_COUNT; i++) {
-		struct conf_mart_reflex_err_table *e =
-			&(wl->conf.init.sr_err_tbl[i]);
-
-		sr_param->error_table[i].len = e->len;
-		sr_param->error_table[i].upper_limit = e->upper_limit;
-		memcpy(sr_param->error_table[i].values, e->values, e->len);
-	}
-
-	ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_PARAMS,
-				   sr_param, sizeof(*sr_param));
-	if (ret < 0) {
-		wl1271_warning("failed to set smart reflex params: %d", ret);
-		goto out;
-	}
-
-	sr_state = kzalloc(sizeof(*sr_state), GFP_KERNEL);
-	if (!sr_state) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/* enable smart reflex */
-	sr_state->enable = wl->conf.init.sr_enable;
-
-	ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_STATE,
-				   sr_state, sizeof(*sr_state));
-	if (ret < 0) {
-		wl1271_warning("failed to set smart reflex params: %d", ret);
-		goto out;
-	}
-
-out:
-	kfree(sr_state);
-	kfree(sr_param);
-	return ret;
-
-}
-
 int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable)
 {
 	struct wl1271_acx_bet_enable *acx = NULL;
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index dcd64b7919eb..6640ebfb6162 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -415,25 +415,6 @@ struct acx_bt_wlan_coex {
 	u8 pad[3];
 } __attribute__ ((packed));
 
-struct acx_smart_reflex_state {
-	struct acx_header header;
-
-	u8 enable;
-	u8 padding[3];
-} __attribute__ ((packed));
-
-struct smart_reflex_err_table {
-	u8 len;
-	s8 upper_limit;
-	s8 values[14];
-} __attribute__ ((packed));
-
-struct acx_smart_reflex_config_params {
-	struct acx_header header;
-
-	struct smart_reflex_err_table error_table[3];
-} __attribute__ ((packed));
-
 struct acx_dco_itrim_params {
 	struct acx_header header;
 
@@ -1035,8 +1016,6 @@ enum {
 	ACX_HT_BSS_OPERATION        = 0x0058,
 	ACX_COEX_ACTIVITY           = 0x0059,
 	ACX_SET_SMART_REFLEX_DEBUG  = 0x005A,
-	ACX_SET_SMART_REFLEX_STATE  = 0x005B,
-	ACX_SET_SMART_REFLEX_PARAMS = 0x005F,
 	ACX_SET_DCO_ITRIM_PARAMS    = 0x0061,
 	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
 	DOT11_CUR_TX_PWR            = 0x100D,
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 905d4287915b..c87ae56ce42a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -722,31 +722,6 @@ struct conf_conn_settings {
 	u8 psm_entry_retries;
 };
 
-#define CONF_SR_ERR_TBL_MAX_VALUES   14
-
-struct conf_mart_reflex_err_table {
-	/*
-	 * Length of the error table values table.
-	 *
-	 * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
-	 */
-	u8 len;
-
-	/*
-	 * Smart Reflex error table upper limit.
-	 *
-	 * Range: s8
-	 */
-	s8 upper_limit;
-
-	/*
-	 * Smart Reflex error table values.
-	 *
-	 * Range: s8
-	 */
-	s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
-};
-
 enum {
 	CONF_REF_CLK_19_2_E,
 	CONF_REF_CLK_26_E,
@@ -907,21 +882,7 @@ struct conf_radio_parms {
 	u8  degraded_normal_to_high_threshold_5;
 };
 
-#define CONF_SR_ERR_TBL_COUNT        3
-
 struct conf_init_settings {
-	/*
-	 * Configure Smart Reflex error table values.
-	 */
-	struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
-
-	/*
-	 * Smart Reflex enable flag.
-	 *
-	 * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
-	 */
-	u8 sr_enable;
-
 	/*
 	 * Configure general parameters.
 	 */
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index bdd4a968b37d..7bfd6c6a4c77 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -303,11 +303,6 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		goto out_free_memmap;
 
-	/* Configure smart reflex */
-	ret = wl1271_acx_smart_reflex(wl);
-	if (ret < 0)
-		goto out_free_memmap;
-
 	return 0;
 
  out_free_memmap:
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b0f4c6efa415..5a6e4d446962 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -226,30 +226,6 @@ static struct conf_drv_settings default_conf = {
 		.psm_entry_retries           = 3
 	},
 	.init = {
-		.sr_err_tbl = {
-			[0] = {
-				.len         = 7,
-				.upper_limit = 0x03,
-				.values      = {
-					0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
-					0x00 }
-			},
-			[1] = {
-				.len         = 7,
-				.upper_limit = 0x03,
-				.values      = {
-					0x18, 0x10, 0x05, 0xf6, 0xf0, 0xe8,
-					0x00 }
-			},
-			[2] = {
-				.len         = 7,
-				.upper_limit = 0x03,
-				.values      = {
-					0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
-					0x00 }
-			}
-		},
-		.sr_enable                   = 1,
 		.genparam                    = {
 			.ref_clk             = CONF_REF_CLK_38_4_E,
 			.settling_time       = 5,
-- 
cgit v1.2.3


From a6fe231361e35e3d068a63bbfd2318fa4e961ec5 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:40:58 +0200
Subject: wl1271: Use slow rates for association messages

While not associated, default the data rates to 1 and 2mbps, so that only
those rates will be used for association related message transfer. Once
associated, configure the full rate-set supported by the AP.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      | 2 --
 drivers/net/wireless/wl12xx/wl1271_conf.h | 3 ++-
 drivers/net/wireless/wl12xx/wl1271_init.c | 2 +-
 drivers/net/wireless/wl12xx/wl1271_main.c | 8 ++++++--
 4 files changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 8dfc9ec9590d..4b5ddba96f0b 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -107,8 +107,6 @@ enum {
 				  CFG_RX_CTL_EN | CFG_RX_BCN_EN |     \
 				  CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
 
-#define WL1271_DEFAULT_BASIC_RATE_SET (CONF_TX_RATE_MASK_ALL)
-
 #define WL1271_FW_NAME "wl1271-fw.bin"
 #define WL1271_NVS_NAME "wl1271-nvs.bin"
 #define WL1271_NVS_LEN  468
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index c87ae56ce42a..5d1b5b6493e9 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -258,7 +258,8 @@ struct conf_rx_settings {
 #define CONF_TX_MAX_RATE_CLASSES       8
 
 #define CONF_TX_RATE_MASK_UNSPECIFIED  0
-#define CONF_TX_RATE_MASK_ALL          0x1eff
+#define CONF_TX_RATE_MASK_BASIC        (CONF_HW_BIT_RATE_1MBPS | \
+					CONF_HW_BIT_RATE_2MBPS)
 #define CONF_TX_RATE_RETRY_LIMIT       10
 
 struct conf_tx_rate_class {
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 7bfd6c6a4c77..c67889dd18fc 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -284,7 +284,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Configure TX rate classes */
-	ret = wl1271_acx_rate_policies(wl, WL1271_DEFAULT_BASIC_RATE_SET);
+	ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_BASIC);
 	if (ret < 0)
 		goto out_free_memmap;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 5a6e4d446962..272a8fa677ef 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1180,6 +1180,11 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 			wl1271_unjoin_channel(wl);
 		else
 			wl1271_join_channel(wl, channel);
+
+		if (conf->flags & IEEE80211_CONF_IDLE) {
+			wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+			wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_BASIC);
+		}
 	}
 
 	/* if the channel changes while joined, join again */
@@ -1568,7 +1573,6 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			}
 		} else {
 			/* use defaults when not associated */
-			wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
 			wl->aid = 0;
 		}
 
@@ -1897,7 +1901,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
-	wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+	wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
 	wl->band = IEEE80211_BAND_2GHZ;
 	wl->vif = NULL;
 	wl->joined = false;
-- 
cgit v1.2.3


From 13f2dc52c69bcca074cd12d4806953b2af45c386 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:40:59 +0200
Subject: wl1271: Fix event acknowledging functionality

In reference source, events are acknowledged separately - fix the driver to
do the same.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_event.c | 6 ++----
 drivers/net/wireless/wl12xx/wl1271_event.h | 2 +-
 drivers/net/wireless/wl12xx/wl1271_main.c  | 5 ++---
 3 files changed, 5 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index d13fdd99c85c..227caa14cbc5 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -184,7 +184,7 @@ void wl1271_event_mbox_config(struct wl1271 *wl)
 		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
 }
 
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num, bool do_ack)
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 {
 	struct event_mailbox mbox;
 	int ret;
@@ -204,9 +204,7 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num, bool do_ack)
 		return ret;
 
 	/* then we let the firmware know it can go on...*/
-	if (do_ack)
-		wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG,
-				   INTR_TRIG_EVENT_ACK);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
index 4e3f55ebb1a8..278f9206aa56 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -112,6 +112,6 @@ struct event_mailbox {
 
 int wl1271_event_unmask(struct wl1271 *wl);
 void wl1271_event_mbox_config(struct wl1271 *wl);
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox, bool do_ack);
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 272a8fa677ef..d507dae19e17 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -450,14 +450,13 @@ static void wl1271_irq_work(struct work_struct *work)
 	intr &= WL1271_INTR_MASK;
 
 	if (intr & WL1271_ACX_INTR_EVENT_A) {
-		bool do_ack = (intr & WL1271_ACX_INTR_EVENT_B) ? false : true;
 		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
-		wl1271_event_handle(wl, 0, do_ack);
+		wl1271_event_handle(wl, 0);
 	}
 
 	if (intr & WL1271_ACX_INTR_EVENT_B) {
 		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
-		wl1271_event_handle(wl, 1, true);
+		wl1271_event_handle(wl, 1);
 	}
 
 	if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
-- 
cgit v1.2.3


From af5e084b3200ab6e3033068a34fe16fd139be17b Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:00 +0200
Subject: wl1271: prevent power save entry while not associated

The mac80211 sometimes requests power save entry while not associated - this
will cause problems, so prevent it if not associated. Go to powersave once
association is complete.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      |  1 +
 drivers/net/wireless/wl12xx/wl1271_main.c | 11 ++++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 4b5ddba96f0b..81e1c9531a3a 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -416,6 +416,7 @@ struct wl1271 {
 
 	/* PSM mode requested */
 	bool psm_requested;
+	bool associated;
 
 	/* retry counter for PSM entries */
 	u8 psm_entry_retry;
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index d507dae19e17..d07f03565196 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -978,6 +978,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->elp = false;
 	wl->psm = 0;
 	wl->psm_entry_retry = 0;
+	wl->associated = false;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->tx_blocks_available = 0;
@@ -1191,8 +1192,6 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		wl1271_join_channel(wl, channel);
 
 	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
-		wl1271_info("psm enabled");
-
 		wl->psm_requested = true;
 
 		/*
@@ -1200,7 +1199,10 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		 * If we're not, we'll enter it when joining an SSID,
 		 * through the bss_info_changed() hook.
 		 */
-		ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+		if (wl->associated) {
+			wl1271_info("psm enabled");
+			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+		}
 	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
 		   wl->psm_requested) {
 		wl1271_info("psm disabled");
@@ -1548,6 +1550,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
+			wl->associated = true;
 
 			/*
 			 * with wl1271, we don't need to update the
@@ -1572,6 +1575,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			}
 		} else {
 			/* use defaults when not associated */
+			wl->associated = false;
 			wl->aid = 0;
 		}
 
@@ -1898,6 +1902,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	wl->psm = 0;
 	wl->psm_requested = false;
 	wl->psm_entry_retry = 0;
+	wl->associated = false;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
-- 
cgit v1.2.3


From 9ccd921792e5b6719ff9e561438e095cba757727 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:01 +0200
Subject: wl1271: Implement chipset boot retry

The wl1271 has a hardware bug which causes it to randomly (very infrequently)
to fail powering up properly. This patch implements retry for the chipset boot
sequence, to work around the hardware problem.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 130 ++++++++++++++++++------------
 1 file changed, 77 insertions(+), 53 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index d07f03565196..0795bf3c60da 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -47,6 +47,8 @@
 #include "wl1271_cmd.h"
 #include "wl1271_boot.h"
 
+#define WL1271_BOOT_RETRIES 3
+
 static struct conf_drv_settings default_conf = {
 	.sg = {
 		.per_threshold               = 7500,
@@ -645,7 +647,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 
 		ret = wl1271_setup(wl);
 		if (ret < 0)
-			goto out_power_off;
+			goto out;
 		break;
 	case CHIP_ID_1271_PG20:
 		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
@@ -653,38 +655,34 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 
 		ret = wl1271_setup(wl);
 		if (ret < 0)
-			goto out_power_off;
+			goto out;
 		break;
 	default:
-		wl1271_error("unsupported chip id: 0x%x", wl->chip.id);
+		wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
 		ret = -ENODEV;
-		goto out_power_off;
+		goto out;
 	}
 
 	if (wl->fw == NULL) {
 		ret = wl1271_fetch_firmware(wl);
 		if (ret < 0)
-			goto out_power_off;
+			goto out;
 	}
 
 	/* No NVS from netlink, try to get it from the filesystem */
 	if (wl->nvs == NULL) {
 		ret = wl1271_fetch_nvs(wl);
 		if (ret < 0)
-			goto out_power_off;
+			goto out;
 	}
 
-	goto out;
-
-out_power_off:
-	wl1271_power_off(wl);
-
 out:
 	return ret;
 }
 
 int wl1271_plt_start(struct wl1271 *wl)
 {
+	int retries = WL1271_BOOT_RETRIES;
 	int ret;
 
 	mutex_lock(&wl->mutex);
@@ -698,35 +696,48 @@ int wl1271_plt_start(struct wl1271 *wl)
 		goto out;
 	}
 
-	wl->state = WL1271_STATE_PLT;
-
-	ret = wl1271_chip_wakeup(wl);
-	if (ret < 0)
-		goto out;
-
-	ret = wl1271_boot(wl);
-	if (ret < 0)
-		goto out_power_off;
-
-	wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+	while (retries) {
+		retries--;
+		ret = wl1271_chip_wakeup(wl);
+		if (ret < 0)
+			goto power_off;
 
-	ret = wl1271_plt_init(wl);
-	if (ret < 0)
-		goto out_irq_disable;
+		ret = wl1271_boot(wl);
+		if (ret < 0)
+			goto power_off;
 
-	/* Make sure power saving is disabled */
-	ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
-	if (ret < 0)
-		goto out_irq_disable;
+		ret = wl1271_plt_init(wl);
+		if (ret < 0)
+			goto irq_disable;
 
-	goto out;
+		/* Make sure power saving is disabled */
+		ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+		if (ret < 0)
+			goto irq_disable;
 
-out_irq_disable:
-	wl1271_disable_interrupts(wl);
+		wl->state = WL1271_STATE_PLT;
+		wl1271_notice("firmware booted in PLT mode (%s)",
+			      wl->chip.fw_ver);
+		goto out;
 
-out_power_off:
-	wl1271_power_off(wl);
+irq_disable:
+		wl1271_disable_interrupts(wl);
+		mutex_unlock(&wl->mutex);
+		/* Unlocking the mutex in the middle of handling is
+		   inherently unsafe. In this case we deem it safe to do,
+		   because we need to let any possibly pending IRQ out of
+		   the system (and while we are WL1271_STATE_OFF the IRQ
+		   work function will not do anything.) Also, any other
+		   possible concurrent operations will fail due to the
+		   current state, hence the wl1271 struct should be safe. */
+		cancel_work_sync(&wl->irq_work);
+		mutex_lock(&wl->mutex);
+power_off:
+		wl1271_power_off(wl);
+	}
 
+	wl1271_error("firmware boot in PLT mode failed despite %d retries",
+		     WL1271_BOOT_RETRIES);
 out:
 	mutex_unlock(&wl->mutex);
 
@@ -882,6 +893,7 @@ static struct notifier_block wl1271_dev_notifier = {
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
 	struct wl1271 *wl = hw->priv;
+	int retries = WL1271_BOOT_RETRIES;
 	int ret = 0;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 start");
@@ -895,30 +907,42 @@ static int wl1271_op_start(struct ieee80211_hw *hw)
 		goto out;
 	}
 
-	ret = wl1271_chip_wakeup(wl);
-	if (ret < 0)
-		goto out;
-
-	ret = wl1271_boot(wl);
-	if (ret < 0)
-		goto out_power_off;
-
-	ret = wl1271_hw_init(wl);
-	if (ret < 0)
-		goto out_irq_disable;
-
-	wl->state = WL1271_STATE_ON;
+	while (retries) {
+		retries--;
+		ret = wl1271_chip_wakeup(wl);
+		if (ret < 0)
+			goto power_off;
 
-	wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
+		ret = wl1271_boot(wl);
+		if (ret < 0)
+			goto power_off;
 
-	goto out;
+		ret = wl1271_hw_init(wl);
+		if (ret < 0)
+			goto irq_disable;
 
-out_irq_disable:
-	wl1271_disable_interrupts(wl);
+		wl->state = WL1271_STATE_ON;
+		wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
+		goto out;
 
-out_power_off:
-	wl1271_power_off(wl);
+irq_disable:
+		wl1271_disable_interrupts(wl);
+		mutex_unlock(&wl->mutex);
+		/* Unlocking the mutex in the middle of handling is
+		   inherently unsafe. In this case we deem it safe to do,
+		   because we need to let any possibly pending IRQ out of
+		   the system (and while we are WL1271_STATE_OFF the IRQ
+		   work function will not do anything.) Also, any other
+		   possible concurrent operations will fail due to the
+		   current state, hence the wl1271 struct should be safe. */
+		cancel_work_sync(&wl->irq_work);
+		mutex_lock(&wl->mutex);
+power_off:
+		wl1271_power_off(wl);
+	}
 
+	wl1271_error("firmware boot failed despite %d retries",
+		     WL1271_BOOT_RETRIES);
 out:
 	mutex_unlock(&wl->mutex);
 
-- 
cgit v1.2.3


From 01ac17ecb6292ceab9bfc498145491b78552b239 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:02 +0200
Subject: wl1271: Add pre-power-on sleep

This patch adds a short delay before powering on the wl1271. Normally, it is
not needed, but if the wl1271 has been powered off shortly before, for reliable
firmware-booting this small stabilization delay is required.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      | 4 +++-
 drivers/net/wireless/wl12xx/wl1271_main.c | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 81e1c9531a3a..c965c4a718f3 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -458,7 +458,9 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 #define WL1271_TX_QUEUE_MAX_LENGTH 20
 
-/* WL1271 needs a 200ms sleep after power on */
+/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
+   on in case is has been shut down shortly before */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
 #define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
 
 static inline bool wl1271_11a_enabled(void)
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 0795bf3c60da..0520b38e8e72 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -618,6 +618,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 	struct wl1271_partition_set partition;
 	int ret = 0;
 
+	msleep(WL1271_PRE_POWER_ON_SLEEP);
 	wl1271_power_on(wl);
 	msleep(WL1271_POWER_ON_SLEEP);
 	wl1271_spi_reset(wl);
-- 
cgit v1.2.3


From 26a63f6af58144818d4979cce1cbb8e49329f732 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:03 +0200
Subject: wl1271: Remove beacon-loss-ind from PSM entry failure handling

Remove the beacon-loss indication to stack from PSM entry failure handling -
this will cause more problems than it will solve due to the design of the
mac80211.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_event.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 227caa14cbc5..8d0c18dec2cd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -89,7 +89,6 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 		} else {
 			wl1271_error("PSM entry failed, giving up.\n");
 			wl->psm_entry_retry = 0;
-			*beacon_loss = true;
 		}
 		break;
 	case EVENT_ENTER_POWER_SAVE_SUCCESS:
-- 
cgit v1.2.3


From e0d8bbf0d23e6b82f13b29f39593d5d13d923b2b Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:04 +0200
Subject: wl1271: Add rudimentary ad-hoc support

This patch adds rudimentary a-hoc support for the driver. It will allow
setting up ad-hoc, and for other devices to scan and join. The beacon and probe
response template setting is slightly dirty, and need to be properly
implemented with support from mac80211. Also, the SSID is not configured to the
firmware - the FW will not be able to respond to probe requests autonomously.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 45 +++++++++++++++++++++++++++++--
 1 file changed, 43 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 0520b38e8e72..d7b1bb3e08a8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1139,11 +1139,15 @@ out:
 
 static int wl1271_join_channel(struct wl1271 *wl, int channel)
 {
-	int ret;
+	int ret = 0;
 	/* we need to use a dummy BSSID for now */
 	static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
 						  0xad, 0xbe, 0xef };
 
+	/* the dummy join is not required for ad-hoc */
+	if (wl->bss_type == BSS_TYPE_IBSS)
+		goto out;
+
 	/* disable mac filter, so we hear everything */
 	wl->rx_config &= ~CFG_BSSID_FILTER_EN;
 
@@ -1572,6 +1576,42 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			wl->joined = true;
 	}
 
+	if (wl->bss_type == BSS_TYPE_IBSS) {
+		/* FIXME: This implements rudimentary ad-hoc support -
+		   proper templates are on the wish list and notification
+		   on when they change. This patch will update the templates
+		   on every call to this function. Also, the firmware will not
+		   answer to probe-requests as it does not have the proper
+		   SSID set in the JOIN command. The probe-response template
+		   is set nevertheless, as the FW will ASSERT without it */
+		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+		if (beacon) {
+			struct ieee80211_hdr *hdr;
+			ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
+						      beacon->data,
+						      beacon->len);
+
+			if (ret < 0) {
+				dev_kfree_skb(beacon);
+				goto out_sleep;
+			}
+
+			hdr = (struct ieee80211_hdr *) beacon->data;
+			hdr->frame_control = cpu_to_le16(
+				IEEE80211_FTYPE_MGMT |
+				IEEE80211_STYPE_PROBE_RESP);
+
+			ret = wl1271_cmd_template_set(wl,
+						      CMD_TEMPL_PROBE_RESPONSE,
+						      beacon->data,
+						      beacon->len);
+			dev_kfree_skb(beacon);
+			if (ret < 0)
+				goto out_sleep;
+		}
+	}
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
@@ -1857,7 +1897,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 		IEEE80211_HW_BEACON_FILTER |
 		IEEE80211_HW_SUPPORTS_PS;
 
-	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
 	wl->hw->wiphy->max_scan_ssids = 1;
 	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
 
-- 
cgit v1.2.3


From ec078d943b89c03e55ac9c8b28f39256d4d4045e Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:05 +0200
Subject: wl1271: Change rates configured for templates

Previously a "firmware chooses" value was used for the rates of all control
message templates set to the firmware. This resulted in a too high rate to be
chosen to transmit those messages. Change this by configuring a fixed low rate
for the templates.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index d7b1bb3e08a8..7a73aaadd04c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -78,7 +78,8 @@ static struct conf_drv_settings default_conf = {
 	.tx = {
 		.tx_energy_detection         = 0,
 		.rc_conf                     = {
-			.enabled_rates       = CONF_TX_RATE_MASK_UNSPECIFIED,
+			.enabled_rates       = CONF_HW_BIT_RATE_1MBPS |
+					       CONF_HW_BIT_RATE_2MBPS,
 			.short_retry_limit   = 10,
 			.long_retry_limit    = 10,
 			.aflags              = 0
-- 
cgit v1.2.3


From 830fb67b8e37fb03cf703b4e1217fe30ce32d579 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:06 +0200
Subject: wl1271: Fix supported rate management

Previously, only basic rates were used for data transmission - resulting in
reduced transfer rates. This patch takes enables the firmware to take advantage
of the full set of data rates supported by the AP.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      |  7 +++-
 drivers/net/wireless/wl12xx/wl1271_acx.c  | 24 +++++++++----
 drivers/net/wireless/wl12xx/wl1271_acx.h  |  5 ++-
 drivers/net/wireless/wl12xx/wl1271_init.c |  2 +-
 drivers/net/wireless/wl12xx/wl1271_main.c | 59 +++++++++++++------------------
 drivers/net/wireless/wl12xx/wl1271_tx.c   | 37 +++++++++++++++++++
 6 files changed, 90 insertions(+), 44 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index c965c4a718f3..9290c92522b4 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -322,6 +322,10 @@ struct wl1271 {
 	enum wl1271_state state;
 	struct mutex mutex;
 
+#define WL1271_FLAG_STA_RATES_CHANGED  (0)
+#define WL1271_FLAG_STA_ASSOCIATED     (1)
+	unsigned long flags;
+
 	struct wl1271_partition_set part;
 
 	struct wl1271_chip chip;
@@ -394,7 +398,9 @@ struct wl1271 {
 	u16 aid;
 
 	/* currently configured rate set */
+	u32 sta_rate_set;
 	u32 basic_rate_set;
+	u32 rate_set;
 
 	/* The current band */
 	enum ieee80211_band band;
@@ -416,7 +422,6 @@ struct wl1271 {
 
 	/* PSM mode requested */
 	bool psm_requested;
-	bool associated;
 
 	/* retry counter for PSM entries */
 	u8 psm_entry_retry;
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index ea6427ad1bcb..0ea1a48c45fa 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -787,10 +787,11 @@ int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats)
 	return 0;
 }
 
-int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates)
+int wl1271_acx_rate_policies(struct wl1271 *wl)
 {
 	struct acx_rate_policy *acx;
 	struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf;
+	int idx = 0;
 	int ret = 0;
 
 	wl1271_debug(DEBUG_ACX, "acx rate policies");
@@ -802,12 +803,21 @@ int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates)
 		goto out;
 	}
 
-	/* configure one default (one-size-fits-all) rate class */
-	acx->rate_class_cnt = cpu_to_le32(1);
-	acx->rate_class[0].enabled_rates = cpu_to_le32(enabled_rates);
-	acx->rate_class[0].short_retry_limit = c->short_retry_limit;
-	acx->rate_class[0].long_retry_limit = c->long_retry_limit;
-	acx->rate_class[0].aflags = c->aflags;
+	/* configure one basic rate class */
+	idx = ACX_TX_BASIC_RATE;
+	acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate_set);
+	acx->rate_class[idx].short_retry_limit = c->short_retry_limit;
+	acx->rate_class[idx].long_retry_limit = c->long_retry_limit;
+	acx->rate_class[idx].aflags = c->aflags;
+
+	/* configure one AP supported rate class */
+	idx = ACX_TX_AP_FULL_RATE;
+	acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->rate_set);
+	acx->rate_class[idx].short_retry_limit = c->short_retry_limit;
+	acx->rate_class[idx].long_retry_limit = c->long_retry_limit;
+	acx->rate_class[idx].aflags = c->aflags;
+
+	acx->rate_class_cnt = cpu_to_le32(ACX_TX_RATE_POLICY_CNT);
 
 	ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 6640ebfb6162..b6a473f60658 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -826,6 +826,9 @@ struct acx_rate_class {
 	u8 reserved;
 };
 
+#define ACX_TX_BASIC_RATE      0
+#define ACX_TX_AP_FULL_RATE    1
+#define ACX_TX_RATE_POLICY_CNT 2
 struct acx_rate_policy {
 	struct acx_header header;
 
@@ -1058,7 +1061,7 @@ int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble);
 int wl1271_acx_cts_protect(struct wl1271 *wl,
 			   enum acx_ctsprotect_type ctsprotect);
 int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
-int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates);
+int wl1271_acx_rate_policies(struct wl1271 *wl);
 int wl1271_acx_ac_cfg(struct wl1271 *wl);
 int wl1271_acx_tid_cfg(struct wl1271 *wl);
 int wl1271_acx_frag_threshold(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index c67889dd18fc..3b4ed070f439 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -284,7 +284,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Configure TX rate classes */
-	ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_BASIC);
+	ret = wl1271_acx_rate_policies(wl);
 	if (ret < 0)
 		goto out_free_memmap;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 7a73aaadd04c..775b1e82ca81 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -777,7 +777,20 @@ out:
 static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct wl1271 *wl = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+	struct ieee80211_sta *sta = txinfo->control.sta;
+	unsigned long flags;
 
+	/* peek into the rates configured in the STA entry */
+	spin_lock_irqsave(&wl->wl_lock, flags);
+	if (sta && sta->supp_rates[conf->channel->band] != wl->sta_rate_set) {
+		wl->sta_rate_set = sta->supp_rates[conf->channel->band];
+		set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
+	}
+	spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+	/* queue the packet */
 	skb_queue_tail(&wl->tx_queue, skb);
 
 	/*
@@ -1004,7 +1017,6 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->elp = false;
 	wl->psm = 0;
 	wl->psm_entry_retry = 0;
-	wl->associated = false;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->tx_blocks_available = 0;
@@ -1016,6 +1028,9 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->time_offset = 0;
 	wl->session_counter = 0;
 	wl->joined = false;
+	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+	wl->sta_rate_set = 0;
+	wl->flags = 0;
 
 	for (i = 0; i < NUM_TX_QUEUES; i++)
 		wl->tx_blocks_freed[i] = 0;
@@ -1212,8 +1227,9 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 			wl1271_join_channel(wl, channel);
 
 		if (conf->flags & IEEE80211_CONF_IDLE) {
-			wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
-			wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_BASIC);
+			wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+			wl->sta_rate_set = 0;
+			wl1271_acx_rate_policies(wl);
 		}
 	}
 
@@ -1229,7 +1245,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		 * If we're not, we'll enter it when joining an SSID,
 		 * through the bss_info_changed() hook.
 		 */
-		if (wl->associated) {
+		if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
 			wl1271_info("psm enabled");
 			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
 		}
@@ -1522,22 +1538,6 @@ out:
 	return ret;
 }
 
-static u32 wl1271_enabled_rates_get(struct wl1271 *wl, u64 basic_rate_set)
-{
-	struct ieee80211_supported_band *band;
-	u32 enabled_rates = 0;
-	int bit;
-
-	band = wl->hw->wiphy->bands[wl->band];
-	for (bit = 0; bit < band->n_bitrates; bit++) {
-		if (basic_rate_set & 0x1)
-			enabled_rates |= band->bitrates[bit].hw_value;
-		basic_rate_set >>= 1;
-	}
-
-	return enabled_rates;
-}
-
 static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
 				       struct ieee80211_bss_conf *bss_conf,
@@ -1616,7 +1616,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
-			wl->associated = true;
+			set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 
 			/*
 			 * with wl1271, we don't need to update the
@@ -1641,7 +1641,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			}
 		} else {
 			/* use defaults when not associated */
-			wl->associated = false;
+			clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 			wl->aid = 0;
 		}
 
@@ -1676,17 +1676,6 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
-	if (changed & BSS_CHANGED_BASIC_RATES) {
-		wl->basic_rate_set = wl1271_enabled_rates_get(
-			wl, bss_conf->basic_rates);
-
-		ret = wl1271_acx_rate_policies(wl, wl->basic_rate_set);
-		if (ret < 0) {
-			wl1271_warning("Set rate policies failed %d", ret);
-			goto out_sleep;
-		}
-	}
-
 out_sleep:
 	wl1271_ps_elp_sleep(wl);
 
@@ -1969,14 +1958,16 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	wl->psm = 0;
 	wl->psm_requested = false;
 	wl->psm_entry_retry = 0;
-	wl->associated = false;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+	wl->sta_rate_set = 0;
 	wl->band = IEEE80211_BAND_2GHZ;
 	wl->vif = NULL;
 	wl->joined = false;
 	wl->gpio_power = false;
+	wl->flags = 0;
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index 00af065c77c2..75f532706332 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -121,6 +121,11 @@ static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	pad = pad - skb->len;
 	tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
 
+	/* if the packets are destined for AP (have a STA entry) send them
+	   with AP rate policies, otherwise use default basic rates */
+	if (control->control.sta)
+		tx_attr |= ACX_TX_AP_FULL_RATE << TX_HW_ATTR_OFST_RATE_POLICY;
+
 	desc->tx_attr = cpu_to_le16(tx_attr);
 
 	wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
@@ -214,18 +219,50 @@ static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
 	return ret;
 }
 
+static u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
+{
+	struct ieee80211_supported_band *band;
+	u32 enabled_rates = 0;
+	int bit;
+
+	band = wl->hw->wiphy->bands[wl->band];
+	for (bit = 0; bit < band->n_bitrates; bit++) {
+		if (rate_set & 0x1)
+			enabled_rates |= band->bitrates[bit].hw_value;
+		rate_set >>= 1;
+	}
+
+	return enabled_rates;
+}
+
 void wl1271_tx_work(struct work_struct *work)
 {
 	struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
 	struct sk_buff *skb;
 	bool woken_up = false;
+	u32 sta_rates = 0;
 	int ret;
 
+	/* check if the rates supported by the AP have changed */
+	if (unlikely(test_and_clear_bit(WL1271_FLAG_STA_RATES_CHANGED,
+					&wl->flags))) {
+		unsigned long flags;
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		sta_rates = wl->sta_rate_set;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+	}
+
 	mutex_lock(&wl->mutex);
 
 	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
+	/* if rates have changed, re-configure the rate policy */
+	if (unlikely(sta_rates)) {
+		wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates);
+		wl1271_acx_rate_policies(wl);
+	}
+
 	while ((skb = skb_dequeue(&wl->tx_queue))) {
 		if (!woken_up) {
 			ret = wl1271_ps_elp_wakeup(wl, false);
-- 
cgit v1.2.3


From 71449f8d7059b69e6e45063997d225d8202221a2 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:07 +0200
Subject: wl1271: Change booleans in struct wl1271 into a flags bitmask

For cleaner implementation, change the bunch of booleans in the struct wl1271
structure into a flags bitmask.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h         | 23 +++++---------
 drivers/net/wireless/wl12xx/wl1271_cmd.c     |  6 ++--
 drivers/net/wireless/wl12xx/wl1271_debugfs.c | 13 ++++++--
 drivers/net/wireless/wl12xx/wl1271_event.c   | 11 +++----
 drivers/net/wireless/wl12xx/wl1271_main.c    | 45 +++++++++++-----------------
 drivers/net/wireless/wl12xx/wl1271_ps.c      | 15 +++++-----
 drivers/net/wireless/wl12xx/wl1271_tx.c      |  6 ++--
 7 files changed, 55 insertions(+), 64 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 9290c92522b4..d0938db043b3 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -324,6 +324,13 @@ struct wl1271 {
 
 #define WL1271_FLAG_STA_RATES_CHANGED  (0)
 #define WL1271_FLAG_STA_ASSOCIATED     (1)
+#define WL1271_FLAG_JOINED             (2)
+#define WL1271_FLAG_GPIO_POWER         (3)
+#define WL1271_FLAG_TX_QUEUE_STOPPED   (4)
+#define WL1271_FLAG_SCANNING           (5)
+#define WL1271_FLAG_IN_ELP             (6)
+#define WL1271_FLAG_PSM                (7)
+#define WL1271_FLAG_PSM_REQUESTED      (8)
 	unsigned long flags;
 
 	struct wl1271_partition_set part;
@@ -363,7 +370,6 @@ struct wl1271 {
 
 	/* Frames scheduled for transmission, not handled yet */
 	struct sk_buff_head tx_queue;
-	bool tx_queue_stopped;
 
 	struct work_struct tx_work;
 
@@ -391,7 +397,6 @@ struct wl1271 {
 	u32 mbox_ptr[2];
 
 	/* Are we currently scanning */
-	bool scanning;
 	struct wl1271_scan scan;
 
 	/* Our association ID */
@@ -411,18 +416,9 @@ struct wl1271 {
 	unsigned int rx_config;
 	unsigned int rx_filter;
 
-	/* is firmware in elp mode */
-	bool elp;
-
 	struct completion *elp_compl;
 	struct delayed_work elp_work;
 
-	/* we can be in psm, but not in elp, we have to differentiate */
-	bool psm;
-
-	/* PSM mode requested */
-	bool psm_requested;
-
 	/* retry counter for PSM entries */
 	u8 psm_entry_retry;
 
@@ -441,15 +437,10 @@ struct wl1271 {
 
 	struct ieee80211_vif *vif;
 
-	/* Used for a workaround to send disconnect before rejoining */
-	bool joined;
-
 	/* Current chipset configuration */
 	struct conf_drv_settings conf;
 
 	struct list_head list;
-
-	bool gpio_power;
 };
 
 int wl1271_plt_start(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 20f3e67c8e48..b5eb9edc63aa 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -655,7 +655,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 	channels = wl->hw->wiphy->bands[ieee_band]->channels;
 	n_ch = wl->hw->wiphy->bands[ieee_band]->n_channels;
 
-	if (wl->scanning)
+	if (test_bit(WL1271_FLAG_SCANNING, &wl->flags))
 		return -EINVAL;
 
 	params = kzalloc(sizeof(*params), GFP_KERNEL);
@@ -730,7 +730,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 
 	wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
 
-	wl->scanning = true;
+	set_bit(WL1271_FLAG_SCANNING, &wl->flags);
 	if (wl1271_11a_enabled()) {
 		wl->scan.state = band;
 		if (band == WL1271_SCAN_BAND_DUAL) {
@@ -748,7 +748,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0);
 	if (ret < 0) {
 		wl1271_error("SCAN failed");
-		wl->scanning = false;
+		clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
 		goto out;
 	}
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
index 4eaf40c57567..8d7588ca68fd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c
+++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
@@ -241,10 +241,12 @@ static ssize_t gpio_power_read(struct file *file, char __user *user_buf,
 			  size_t count, loff_t *ppos)
 {
 	struct wl1271 *wl = file->private_data;
+	bool state = test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+
 	int res;
 	char buf[10];
 
-	res = scnprintf(buf, sizeof(buf), "%d\n", wl->gpio_power);
+	res = scnprintf(buf, sizeof(buf), "%d\n", state);
 
 	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
 }
@@ -274,8 +276,13 @@ static ssize_t gpio_power_write(struct file *file,
 		goto out;
 	}
 
-	wl->set_power(!!value);
-	wl->gpio_power = !!value;
+	if (value) {
+		wl->set_power(true);
+		set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+	} else {
+		wl->set_power(false);
+		clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+	}
 
 out:
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 8d0c18dec2cd..6ff535d5c7ee 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -35,7 +35,7 @@ static int wl1271_event_scan_complete(struct wl1271 *wl,
 	wl1271_debug(DEBUG_EVENT, "status: 0x%x",
 		     mbox->scheduled_scan_status);
 
-	if (wl->scanning) {
+	if (test_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
 		if (wl->scan.state == WL1271_SCAN_BAND_DUAL) {
 			wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
 						NULL, size);
@@ -43,7 +43,7 @@ static int wl1271_event_scan_complete(struct wl1271 *wl,
 			 * to the wl1271_cmd_scan function that we are not
 			 * scanning as it checks that.
 			 */
-			wl->scanning = false;
+			clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
 			wl1271_cmd_scan(wl, wl->scan.ssid, wl->scan.ssid_len,
 						wl->scan.active,
 						wl->scan.high_prio,
@@ -62,7 +62,7 @@ static int wl1271_event_scan_complete(struct wl1271 *wl,
 			mutex_unlock(&wl->mutex);
 			ieee80211_scan_completed(wl->hw, false);
 			mutex_lock(&wl->mutex);
-			wl->scanning = false;
+			clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
 		}
 	}
 	return 0;
@@ -78,7 +78,7 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 	switch (mbox->ps_status) {
 	case EVENT_ENTER_POWER_SAVE_FAIL:
-		if (!wl->psm) {
+		if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
 			wl->psm_entry_retry = 0;
 			break;
 		}
@@ -135,7 +135,8 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	 * filtering) is enabled. Without PSM, the stack will receive all
 	 * beacons and can detect beacon loss by itself.
 	 */
-	if (vector & BSS_LOSE_EVENT_ID && wl->psm) {
+	if (vector & BSS_LOSE_EVENT_ID &&
+	    test_bit(WL1271_FLAG_PSM, &wl->flags)) {
 		wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
 
 		/* indicate to the stack, that beacons have been lost */
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 775b1e82ca81..90a60c1147a8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -378,13 +378,13 @@ static void wl1271_disable_interrupts(struct wl1271 *wl)
 static void wl1271_power_off(struct wl1271 *wl)
 {
 	wl->set_power(false);
-	wl->gpio_power = false;
+	clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
 }
 
 static void wl1271_power_on(struct wl1271 *wl)
 {
 	wl->set_power(true);
-	wl->gpio_power = true;
+	set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
 }
 
 static void wl1271_fw_status(struct wl1271 *wl,
@@ -812,7 +812,7 @@ static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		 * protected. Maybe fix this by removing the stupid
 		 * variable altogether and checking the real queue state?
 		 */
-		wl->tx_queue_stopped = true;
+		set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
 	}
 
 	return NETDEV_TX_OK;
@@ -985,11 +985,10 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 
 	WARN_ON(wl->state != WL1271_STATE_ON);
 
-	if (wl->scanning) {
+	if (test_and_clear_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
 		mutex_unlock(&wl->mutex);
 		ieee80211_scan_completed(wl->hw, true);
 		mutex_lock(&wl->mutex);
-		wl->scanning = false;
 	}
 
 	wl->state = WL1271_STATE_OFF;
@@ -1014,10 +1013,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->band = IEEE80211_BAND_2GHZ;
 
 	wl->rx_counter = 0;
-	wl->elp = false;
-	wl->psm = 0;
 	wl->psm_entry_retry = 0;
-	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->tx_blocks_available = 0;
 	wl->tx_results_count = 0;
@@ -1027,7 +1023,6 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->tx_security_seq_32 = 0;
 	wl->time_offset = 0;
 	wl->session_counter = 0;
-	wl->joined = false;
 	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
 	wl->sta_rate_set = 0;
 	wl->flags = 0;
@@ -1174,7 +1169,7 @@ static int wl1271_join_channel(struct wl1271 *wl, int channel)
 	if (ret < 0)
 		goto out;
 
-	wl->joined = true;
+	set_bit(WL1271_FLAG_JOINED, &wl->flags);
 
 out:
 	return ret;
@@ -1189,7 +1184,7 @@ static int wl1271_unjoin_channel(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl->joined = false;
+	clear_bit(WL1271_FLAG_JOINED, &wl->flags);
 	wl->channel = 0;
 	memset(wl->bssid, 0, ETH_ALEN);
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
@@ -1221,7 +1216,8 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		goto out;
 
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
-		if (conf->flags & IEEE80211_CONF_IDLE && wl->joined)
+		if (conf->flags & IEEE80211_CONF_IDLE &&
+		    test_bit(WL1271_FLAG_JOINED, &wl->flags))
 			wl1271_unjoin_channel(wl);
 		else
 			wl1271_join_channel(wl, channel);
@@ -1234,11 +1230,12 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 	/* if the channel changes while joined, join again */
-	if (channel != wl->channel && wl->joined)
+	if (channel != wl->channel && test_bit(WL1271_FLAG_JOINED, &wl->flags))
 		wl1271_join_channel(wl, channel);
 
-	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
-		wl->psm_requested = true;
+	if (conf->flags & IEEE80211_CONF_PS &&
+	    !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
+		set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
 
 		/*
 		 * We enter PSM only if we're already associated.
@@ -1250,12 +1247,12 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
 		}
 	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
-		   wl->psm_requested) {
+		   test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
 		wl1271_info("psm disabled");
 
-		wl->psm_requested = false;
+		clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
 
-		if (wl->psm)
+		if (test_bit(WL1271_FLAG_PSM, &wl->flags))
 			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
 	}
 
@@ -1574,7 +1571,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				wl1271_warning("cmd join failed %d", ret);
 				goto out_sleep;
 			}
-			wl->joined = true;
+			set_bit(WL1271_FLAG_JOINED, &wl->flags);
 	}
 
 	if (wl->bss_type == BSS_TYPE_IBSS) {
@@ -1633,7 +1630,8 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				goto out_sleep;
 
 			/* If we want to go in PSM but we're not there yet */
-			if (wl->psm_requested && !wl->psm) {
+			if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) &&
+			    !test_bit(WL1271_FLAG_PSM, &wl->flags)) {
 				mode = STATION_POWER_SAVE_MODE;
 				ret = wl1271_ps_set_mode(wl, mode);
 				if (ret < 0)
@@ -1949,24 +1947,17 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 
 	INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
 	wl->channel = WL1271_DEFAULT_CHANNEL;
-	wl->scanning = false;
 	wl->default_key = 0;
 	wl->rx_counter = 0;
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
-	wl->elp = false;
-	wl->psm = 0;
-	wl->psm_requested = false;
 	wl->psm_entry_retry = 0;
-	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
 	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
 	wl->sta_rate_set = 0;
 	wl->band = IEEE80211_BAND_2GHZ;
 	wl->vif = NULL;
-	wl->joined = false;
-	wl->gpio_power = false;
 	wl->flags = 0;
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index 507cd91d7eed..e407790f6771 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -39,12 +39,13 @@ void wl1271_elp_work(struct work_struct *work)
 
 	mutex_lock(&wl->mutex);
 
-	if (wl->elp || !wl->psm)
+	if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
+	    !test_bit(WL1271_FLAG_PSM, &wl->flags))
 		goto out;
 
 	wl1271_debug(DEBUG_PSM, "chip to elp");
 	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
-	wl->elp = true;
+	set_bit(WL1271_FLAG_IN_ELP, &wl->flags);
 
 out:
 	mutex_unlock(&wl->mutex);
@@ -55,7 +56,7 @@ out:
 /* Routines to toggle sleep mode while in ELP */
 void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
-	if (wl->psm) {
+	if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
 		cancel_delayed_work(&wl->elp_work);
 		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
 					msecs_to_jiffies(ELP_ENTRY_DELAY));
@@ -70,7 +71,7 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake)
 	u32 start_time = jiffies;
 	bool pending = false;
 
-	if (!wl->elp)
+	if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags))
 		return 0;
 
 	wl1271_debug(DEBUG_PSM, "waking up chip from elp");
@@ -101,7 +102,7 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake)
 		}
 	}
 
-	wl->elp = false;
+	clear_bit(WL1271_FLAG_IN_ELP, &wl->flags);
 
 	wl1271_debug(DEBUG_PSM, "wakeup time: %u ms",
 		     jiffies_to_msecs(jiffies - start_time));
@@ -143,7 +144,7 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode)
 		if (ret < 0)
 			return ret;
 
-		wl->psm = 1;
+		set_bit(WL1271_FLAG_PSM, &wl->flags);
 		break;
 	case STATION_ACTIVE_MODE:
 	default:
@@ -166,7 +167,7 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode)
 		if (ret < 0)
 			return ret;
 
-		wl->psm = 0;
+		clear_bit(WL1271_FLAG_PSM, &wl->flags);
 		break;
 	}
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index 75f532706332..a288cc317d7b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -277,18 +277,18 @@ void wl1271_tx_work(struct work_struct *work)
 			wl1271_debug(DEBUG_TX, "tx_work: fw buffer full, "
 				     "stop queues");
 			ieee80211_stop_queues(wl->hw);
-			wl->tx_queue_stopped = true;
+			set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
 			skb_queue_head(&wl->tx_queue, skb);
 			goto out;
 		} else if (ret < 0) {
 			dev_kfree_skb(skb);
 			goto out;
-		} else if (wl->tx_queue_stopped) {
+		} else if (test_and_clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED,
+					      &wl->flags)) {
 			/* firmware buffer has space, restart queues */
 			wl1271_debug(DEBUG_TX,
 				     "complete_packet: waking queues");
 			ieee80211_wake_queues(wl->hw);
-			wl->tx_queue_stopped = false;
 		}
 	}
 
-- 
cgit v1.2.3


From 38ad2d87d42ba847c100ef132e8e363513982c8b Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:08 +0200
Subject: wl1271: Add support for acx_pm_config

This acx configures host clock parameters in correspondence with the clock
request line - the settling time of the clock, and whether fast wake-up is
supported.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.c  | 28 ++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_acx.h  |  9 +++++++++
 drivers/net/wireless/wl12xx/wl1271_conf.h | 17 +++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_init.c |  5 +++++
 drivers/net/wireless/wl12xx/wl1271_main.c |  4 ++++
 5 files changed, 63 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 0ea1a48c45fa..0b3434843476 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -1118,3 +1118,31 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl1271_acx_pm_config(struct wl1271 *wl)
+{
+	struct wl1271_acx_pm_config *acx = NULL;
+	struct  conf_pm_config_settings *c = &wl->conf.pm_config;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx pm config");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->host_clk_settling_time = cpu_to_le32(c->host_clk_settling_time);
+	acx->host_fast_wakeup_support = c->host_fast_wakeup_support;
+
+	ret = wl1271_cmd_configure(wl, ACX_PM_CONFIG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx pm config failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index b6a473f60658..1bb63af64f0e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -961,6 +961,13 @@ struct wl1271_acx_arp_filter {
 			       used. */
 } __attribute__((packed));
 
+struct wl1271_acx_pm_config {
+	struct acx_header header;
+
+	__le32 host_clk_settling_time;
+	u8 host_fast_wakeup_support;
+	u8 padding[3];
+} __attribute__ ((packed));
 
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
@@ -1025,6 +1032,7 @@ enum {
 	DOT11_RX_DOT11_MODE         = 0x1012,
 	DOT11_RTS_THRESHOLD         = 0x1013,
 	DOT11_GROUP_ADDRESS_TBL     = 0x1014,
+	ACX_PM_CONFIG               = 0x1016,
 
 	MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
 
@@ -1073,5 +1081,6 @@ int wl1271_acx_smart_reflex(struct wl1271 *wl);
 int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
 int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
 			     u8 version);
+int wl1271_acx_pm_config(struct wl1271 *wl);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 5d1b5b6493e9..1993d63c214e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -904,6 +904,22 @@ struct conf_itrim_settings {
 	u32 timeout;
 };
 
+struct conf_pm_config_settings {
+	/*
+	 * Host clock settling time
+	 *
+	 * Range: 0 - 30000 us
+	 */
+	u32 host_clk_settling_time;
+
+	/*
+	 * Host fast wakeup support
+	 *
+	 * Range: true, false
+	 */
+	bool host_fast_wakeup_support;
+};
+
 struct conf_drv_settings {
 	struct conf_sg_settings sg;
 	struct conf_rx_settings rx;
@@ -911,6 +927,7 @@ struct conf_drv_settings {
 	struct conf_conn_settings conn;
 	struct conf_init_settings init;
 	struct conf_itrim_settings itrim;
+	struct conf_pm_config_settings pm_config;
 };
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 3b4ed070f439..c9848eecb767 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -303,6 +303,11 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* configure PM */
+	ret = wl1271_acx_pm_config(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	return 0;
 
  out_free_memmap:
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 90a60c1147a8..7e6b500dfb6f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -321,6 +321,10 @@ static struct conf_drv_settings default_conf = {
 	.itrim = {
 		.enable = false,
 		.timeout = 50000,
+	},
+	.pm_config = {
+		.host_clk_settling_time = 5000,
+		.host_fast_wakeup_support = false
 	}
 };
 
-- 
cgit v1.2.3


From 04477bf095afd008b73717f7a4ea1fdf18b1b5e2 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:09 +0200
Subject: wl1271: Check vif for NULL when indicating beacon-loss

Because the interface is started and the vif are created and destroyed
separately, there is a slim possibility beacon-loss indications occur while
there is no vif - causing a kernel-oops unless checked.

Add checking for the vif.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 6ff535d5c7ee..0a145afc9905 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -150,7 +150,7 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			return ret;
 	}
 
-	if (beacon_loss) {
+	if (wl->vif && beacon_loss) {
 		/* Obviously, it's dangerous to release the mutex while
 		   we are holding many of the variables in the wl struct.
 		   That's why it's done last in the function, and care must
-- 
cgit v1.2.3


From 8f648c00039a42e67a9dff034c77d41502dab1f3 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Fri, 11 Dec 2009 15:41:10 +0200
Subject: wl1271: Prevent performing "join" before association

There is a minor bug in the code causing a "join" to be performed before
there is an intention to associate. Fix this.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 7e6b500dfb6f..4a997381a8d0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1223,7 +1223,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		if (conf->flags & IEEE80211_CONF_IDLE &&
 		    test_bit(WL1271_FLAG_JOINED, &wl->flags))
 			wl1271_unjoin_channel(wl);
-		else
+		else if (!(conf->flags & IEEE80211_CONF_IDLE))
 			wl1271_join_channel(wl, channel);
 
 		if (conf->flags & IEEE80211_CONF_IDLE) {
-- 
cgit v1.2.3


From 00e23ce219a9ac6c5f764342ca13f8ac1bab0382 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 23 Dec 2009 00:03:22 +0100
Subject: rt2x00: Fix checks for rt2800 SOC support.

Fix checking for SOC support in rt2800pci. The wrong config (an unexisting
one) was checked.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 458378c4e500..96e024477b2f 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -52,8 +52,8 @@
 #define CONFIG_RT2800PCI_PCI
 #endif
 
-#ifdef CONFIG_RT2800PCI_WISOC_MODULE
-#define CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC_MODULE
+#define CONFIG_RT2800PCI_SOC
 #endif
 
 /*
@@ -87,7 +87,7 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 }
 
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
 static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 {
 	u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
@@ -98,7 +98,7 @@ static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 {
 }
-#endif /* CONFIG_RT2800PCI_WISOC */
+#endif /* CONFIG_RT2800PCI_SOC */
 
 #ifdef CONFIG_RT2800PCI_PCI
 static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
@@ -1251,7 +1251,7 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
 #endif /* CONFIG_RT2800PCI_PCI */
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
 #if defined(CONFIG_RALINK_RT288X)
 __rt2x00soc_probe(RT2880, &rt2800pci_ops);
 #elif defined(CONFIG_RALINK_RT305X)
@@ -1269,7 +1269,7 @@ static struct platform_driver rt2800soc_driver = {
 	.suspend	= rt2x00soc_suspend,
 	.resume		= rt2x00soc_resume,
 };
-#endif /* CONFIG_RT2800PCI_WISOC */
+#endif /* CONFIG_RT2800PCI_SOC */
 
 #ifdef CONFIG_RT2800PCI_PCI
 static struct pci_driver rt2800pci_driver = {
@@ -1286,7 +1286,7 @@ static int __init rt2800pci_init(void)
 {
 	int ret = 0;
 
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
 	ret = platform_driver_register(&rt2800soc_driver);
 	if (ret)
 		return ret;
@@ -1294,7 +1294,7 @@ static int __init rt2800pci_init(void)
 #ifdef CONFIG_RT2800PCI_PCI
 	ret = pci_register_driver(&rt2800pci_driver);
 	if (ret) {
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
 		platform_driver_unregister(&rt2800soc_driver);
 #endif
 		return ret;
@@ -1309,7 +1309,7 @@ static void __exit rt2800pci_exit(void)
 #ifdef CONFIG_RT2800PCI_PCI
 	pci_unregister_driver(&rt2800pci_driver);
 #endif
-#ifdef CONFIG_RT2800PCI_WISOC
+#ifdef CONFIG_RT2800PCI_SOC
 	platform_driver_unregister(&rt2800soc_driver);
 #endif
 }
-- 
cgit v1.2.3


From ac394917f5138f9bb2774718312dec179164f3dc Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 23 Dec 2009 00:03:23 +0100
Subject: rt2x00: Let rt2800lib check CONFIG_RT2X00_LIB_USB instead of
 CONFIG_RT2800USB

rt2800lib currently checks whether RT2800USB is enabled in the configuration.
Strictly speaking this is not necessary, it only needs to know whether the
generic rt2x00usb library functions are available. Therefore check for
RT2X00_LIB_USB instead.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 27bf887f1453..a654551b7325 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -37,7 +37,7 @@
 #include <linux/module.h>
 
 #include "rt2x00.h"
-#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE)
+#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
 #include "rt2x00usb.h"
 #endif
 #include "rt2800lib.h"
@@ -1121,7 +1121,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2x00_intf_is_usb(rt2x00dev)) {
 		rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE)
+#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
 		rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
 					    USB_MODE_RESET, REGISTER_TIMEOUT);
 #endif
-- 
cgit v1.2.3


From 73a2f1259ebb49f9768aa12eee2a1071345eb7f2 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 23 Dec 2009 00:03:24 +0100
Subject: rt2x00: convert RT2800PCI_PCI and RT2800PCI_SOC Kconfig symbols to
 booleans.

There is no need for Kconfig symbols RT2800PCI_PCI and RT2800PCI_SOC to be
tristates, as they are only used to check whether RT2800 PCI or SOC support
is to be compiled in.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/Kconfig     | 4 ++--
 drivers/net/wireless/rt2x00/rt2800pci.c | 8 --------
 2 files changed, 2 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bf60689aaabb..3ca824a91ad9 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -54,12 +54,12 @@ config RT61PCI
 	  When compiled as a module, this driver will be called rt61pci.
 
 config RT2800PCI_PCI
-	tristate
+	boolean
 	depends on PCI
 	default y
 
 config RT2800PCI_SOC
-	tristate
+	boolean
 	depends on RALINK_RT288X || RALINK_RT305X
 	default y
 
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 96e024477b2f..2f9deddaf75b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -48,14 +48,6 @@
 #include "rt2800.h"
 #include "rt2800pci.h"
 
-#ifdef CONFIG_RT2800PCI_PCI_MODULE
-#define CONFIG_RT2800PCI_PCI
-#endif
-
-#ifdef CONFIG_RT2800PCI_SOC_MODULE
-#define CONFIG_RT2800PCI_SOC
-#endif
-
 /*
  * Allow hardware encryption to be disabled.
  */
-- 
cgit v1.2.3


From 5122d8986232ef2a761f5cf70c31666c4d65c3e4 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 23 Dec 2009 00:03:25 +0100
Subject: rt2x00: Cleanup chip handling helper functions.

Let each of them take a struct rt2x00_dev pointer as argument instead of
a mixture of struct rt2x00_chip and struct rt2x00_dev pointers.
Preparation for further clean ups in the rt2x00 chip handling, especially
for rt2800 devices.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c |  5 +-
 drivers/net/wireless/rt2x00/rt2500pci.c | 39 +++++++-------
 drivers/net/wireless/rt2x00/rt2500usb.c | 38 +++++++-------
 drivers/net/wireless/rt2x00/rt2800lib.c | 90 ++++++++++++++++-----------------
 drivers/net/wireless/rt2x00/rt2800pci.c |  3 +-
 drivers/net/wireless/rt2x00/rt2800usb.c |  4 +-
 drivers/net/wireless/rt2x00/rt2x00.h    | 24 ++++-----
 drivers/net/wireless/rt2x00/rt61pci.c   | 29 +++++------
 drivers/net/wireless/rt2x00/rt73usb.c   | 36 ++++++-------
 9 files changed, 125 insertions(+), 143 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index e7f46405a418..d86d233c6810 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -451,7 +451,7 @@ static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * RF2420 chipset don't need any additional actions.
 	 */
-	if (rt2x00_rf(&rt2x00dev->chip, RF2420))
+	if (rt2x00_rf(rt2x00dev, RF2420))
 		return;
 
 	/*
@@ -1343,8 +1343,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
+	if (!rt2x00_rf(rt2x00dev, RF2420) && !rt2x00_rf(rt2x00dev, RF2421)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 408fcfc120f5..46cbc6ef66ab 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -440,8 +440,7 @@ static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * RT2525E and RT5222 need to flip TX I/Q
 	 */
-	if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+	if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
 		rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 		rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
 		rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
@@ -449,7 +448,7 @@ static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
 		/*
 		 * RT2525E does not need RX I/Q Flip.
 		 */
-		if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+		if (rt2x00_rf(rt2x00dev, RF2525E))
 			rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 	} else {
 		rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
@@ -475,14 +474,14 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
 	 * Switch on tuning bits.
 	 * For RT2523 devices we do not need to update the R1 register.
 	 */
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
+	if (!rt2x00_rf(rt2x00dev, RF2523))
 		rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
 	rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 
 	/*
 	 * For RT2525 we should first set the channel to half band higher.
 	 */
-	if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+	if (rt2x00_rf(rt2x00dev, RF2525)) {
 		static const u32 vals[] = {
 			0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
 			0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
@@ -516,7 +515,7 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
 	 * Switch off tuning bits.
 	 * For RT2523 devices we do not need to update the R1 register.
 	 */
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+	if (!rt2x00_rf(rt2x00dev, RF2523)) {
 		rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
 		rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 	}
@@ -640,7 +639,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 	 * up to version C the link tuning should halt after 20
 	 * seconds while being associated.
 	 */
-	if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
+	if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D &&
 	    rt2x00dev->intf_associated && count > 20)
 		return;
 
@@ -650,7 +649,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 	 * should go straight to dynamic CCA tuning when they
 	 * are not associated.
 	 */
-	if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
+	if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D ||
 	    !rt2x00dev->intf_associated)
 		goto dynamic_cca_tune;
 
@@ -1507,12 +1506,12 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+	if (!rt2x00_rf(rt2x00dev, RF2522) &&
+	    !rt2x00_rf(rt2x00dev, RF2523) &&
+	    !rt2x00_rf(rt2x00dev, RF2524) &&
+	    !rt2x00_rf(rt2x00dev, RF2525) &&
+	    !rt2x00_rf(rt2x00dev, RF2525E) &&
+	    !rt2x00_rf(rt2x00dev, RF5222)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -1744,22 +1743,22 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+	if (rt2x00_rf(rt2x00dev, RF2522)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
 		spec->channels = rf_vals_bg_2522;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2523)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
 		spec->channels = rf_vals_bg_2523;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2524)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
 		spec->channels = rf_vals_bg_2524;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2525)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
 		spec->channels = rf_vals_bg_2525;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2525E)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
 		spec->channels = rf_vals_bg_2525e;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+	} else if (rt2x00_rf(rt2x00dev, RF5222)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_5222);
 		spec->channels = rf_vals_5222;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 83f2592c59de..9e6f865c57f2 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -565,8 +565,7 @@ static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * RT2525E and RT5222 need to flip TX I/Q
 	 */
-	if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+	if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
 		rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 		rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
 		rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
@@ -574,7 +573,7 @@ static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
 		/*
 		 * RT2525E does not need RX I/Q Flip.
 		 */
-		if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+		if (rt2x00_rf(rt2x00dev, RF2525E))
 			rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 	} else {
 		rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
@@ -598,7 +597,7 @@ static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * For RT2525E we should first set the channel to half band higher.
 	 */
-	if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+	if (rt2x00_rf(rt2x00dev, RF2525E)) {
 		static const u32 vals[] = {
 			0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
 			0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
@@ -793,7 +792,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 
-	if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
+	if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) {
 		rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 		rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
 	} else {
@@ -1411,19 +1410,18 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
-	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
-
+	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0) ||
+	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+	if (!rt2x00_rf(rt2x00dev, RF2522) &&
+	    !rt2x00_rf(rt2x00dev, RF2523) &&
+	    !rt2x00_rf(rt2x00dev, RF2524) &&
+	    !rt2x00_rf(rt2x00dev, RF2525) &&
+	    !rt2x00_rf(rt2x00dev, RF2525E) &&
+	    !rt2x00_rf(rt2x00dev, RF5222)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -1667,22 +1665,22 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+	if (rt2x00_rf(rt2x00dev, RF2522)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
 		spec->channels = rf_vals_bg_2522;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2523)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
 		spec->channels = rf_vals_bg_2523;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2524)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
 		spec->channels = rf_vals_bg_2524;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2525)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
 		spec->channels = rf_vals_bg_2525;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2525E)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
 		spec->channels = rf_vals_bg_2525e;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+	} else if (rt2x00_rf(rt2x00dev, RF5222)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_5222);
 		spec->channels = rf_vals_5222;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index a654551b7325..8ff7db853286 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -220,8 +220,7 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * RT2880 and RT3052 don't support MCU requests.
 	 */
-	if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
-	    rt2x00_rt(&rt2x00dev->chip, RT3052))
+	if (rt2x00_rt(rt2x00dev, RT2880) || rt2x00_rt(rt2x00dev, RT3052))
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
@@ -806,12 +805,12 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	unsigned int tx_pin;
 	u8 bbp;
 
-	if ((rt2x00_rt(&rt2x00dev->chip, RT3070) ||
-	     rt2x00_rt(&rt2x00dev->chip, RT3090)) &&
-	    (rt2x00_rf(&rt2x00dev->chip, RF2020) ||
-	     rt2x00_rf(&rt2x00dev->chip, RF3020) ||
-	     rt2x00_rf(&rt2x00dev->chip, RF3021) ||
-	     rt2x00_rf(&rt2x00dev->chip, RF3022)))
+	if ((rt2x00_rt(rt2x00dev, RT3070) ||
+	     rt2x00_rt(rt2x00dev, RT3090)) &&
+	    (rt2x00_rf(rt2x00dev, RF2020) ||
+	     rt2x00_rf(rt2x00dev, RF3020) ||
+	     rt2x00_rf(rt2x00dev, RF3021) ||
+	     rt2x00_rf(rt2x00dev, RF3022)))
 		rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info);
 	else
 		rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info);
@@ -878,7 +877,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
 	rt2800_bbp_write(rt2x00dev, 3, bbp);
 
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+	if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION) {
 		if (conf_is_ht40(conf)) {
 			rt2800_bbp_write(rt2x00dev, 69, 0x1a);
 			rt2800_bbp_write(rt2x00dev, 70, 0x0a);
@@ -1041,7 +1040,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
 {
 	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
 		if (rt2x00_intf_is_usb(rt2x00dev) &&
-		    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+		    rt2x00_rev(rt2x00dev) == RT3070_VERSION)
 			return 0x1c + (2 * rt2x00dev->lna_gain);
 		else
 			return 0x2e + rt2x00dev->lna_gain;
@@ -1072,7 +1071,7 @@ EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 		       const u32 count)
 {
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+	if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION)
 		return;
 
 	/*
@@ -1158,7 +1157,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
 	if (rt2x00_intf_is_usb(rt2x00dev) &&
-	    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+	    rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -1185,8 +1184,8 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+	if (rt2x00_rev(rt2x00dev) >= RT2880E_VERSION &&
+	    rt2x00_rev(rt2x00dev) < RT3070_VERSION)
 		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
 	else
 		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
@@ -1465,22 +1464,22 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	rt2800_bbp_write(rt2x00dev, 103, 0x00);
 	rt2800_bbp_write(rt2x00dev, 105, 0x05);
 
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+	if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION) {
 		rt2800_bbp_write(rt2x00dev, 69, 0x16);
 		rt2800_bbp_write(rt2x00dev, 73, 0x12);
 	}
 
-	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+	if (rt2x00_rev(rt2x00dev) > RT2860D_VERSION)
 		rt2800_bbp_write(rt2x00dev, 84, 0x19);
 
 	if (rt2x00_intf_is_usb(rt2x00dev) &&
-	    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+	    rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
 		rt2800_bbp_write(rt2x00dev, 70, 0x0a);
 		rt2800_bbp_write(rt2x00dev, 84, 0x99);
 		rt2800_bbp_write(rt2x00dev, 105, 0x05);
 	}
 
-	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+	if (rt2x00_rt(rt2x00dev, RT3052)) {
 		rt2800_bbp_write(rt2x00dev, 31, 0x08);
 		rt2800_bbp_write(rt2x00dev, 78, 0x0e);
 		rt2800_bbp_write(rt2x00dev, 80, 0x08);
@@ -1566,13 +1565,13 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	u8 bbp;
 
 	if (rt2x00_intf_is_usb(rt2x00dev) &&
-	    rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+	    rt2x00_rev(rt2x00dev) != RT3070_VERSION)
 		return 0;
 
 	if (rt2x00_intf_is_pci(rt2x00dev)) {
-		if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-		    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-		    !rt2x00_rf(&rt2x00dev->chip, RF3022))
+		if (!rt2x00_rf(rt2x00dev, RF3020) &&
+		    !rt2x00_rf(rt2x00dev, RF3021) &&
+		    !rt2x00_rf(rt2x00dev, RF3022))
 			return 0;
 	}
 
@@ -1737,7 +1736,7 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
 		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
-	} else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+	} else if (rt2x00_rev(rt2x00dev) < RT2883_VERSION) {
 		/*
 		 * There is a max of 2 RX streams for RT28x0 series
 		 */
@@ -1839,17 +1838,15 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (rt2x00_intf_is_usb(rt2x00dev)) {
-		struct rt2x00_chip *chip = &rt2x00dev->chip;
-
 		/*
 		 * The check for rt2860 is not a typo, some rt2870 hardware
 		 * identifies itself as rt2860 in the CSR register.
 		 */
-		if (rt2x00_check_rev(chip, 0xfff00000, 0x28600000) ||
-		    rt2x00_check_rev(chip, 0xfff00000, 0x28700000) ||
-		    rt2x00_check_rev(chip, 0xfff00000, 0x28800000)) {
+		if (rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28600000) ||
+		    rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28700000) ||
+		    rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28800000)) {
 			rt2x00_set_chip_rt(rt2x00dev, RT2870);
-		} else if (rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) {
+		} else if (rt2x00_check_rev(rt2x00dev, 0xffff0000, 0x30700000)) {
 			rt2x00_set_chip_rt(rt2x00dev, RT3070);
 		} else {
 			ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
@@ -1858,14 +1855,14 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	}
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+	if (!rt2x00_rf(rt2x00dev, RF2820) &&
+	    !rt2x00_rf(rt2x00dev, RF2850) &&
+	    !rt2x00_rf(rt2x00dev, RF2720) &&
+	    !rt2x00_rf(rt2x00dev, RF2750) &&
+	    !rt2x00_rf(rt2x00dev, RF3020) &&
+	    !rt2x00_rf(rt2x00dev, RF2020) &&
+	    !rt2x00_rf(rt2x00dev, RF3021) &&
+	    !rt2x00_rf(rt2x00dev, RF3022)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2013,7 +2010,6 @@ static const struct rf_channel rf_vals_302x[] = {
 
 int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
-	struct rt2x00_chip *chip = &rt2x00dev->chip;
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
 	char *tx_power1;
@@ -2049,19 +2045,19 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-	if (rt2x00_rf(chip, RF2820) ||
-	    rt2x00_rf(chip, RF2720) ||
-	    (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(chip, RF3052))) {
+	if (rt2x00_rf(rt2x00dev, RF2820) ||
+	    rt2x00_rf(rt2x00dev, RF2720) ||
+	    (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(rt2x00dev, RF3052))) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals;
-	} else if (rt2x00_rf(chip, RF2850) || rt2x00_rf(chip, RF2750)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals);
 		spec->channels = rf_vals;
-	} else if (rt2x00_rf(chip, RF3020) ||
-		   rt2x00_rf(chip, RF2020) ||
-		   rt2x00_rf(chip, RF3021) ||
-		   rt2x00_rf(chip, RF3022)) {
+	} else if (rt2x00_rf(rt2x00dev, RF3020) ||
+		   rt2x00_rf(rt2x00dev, RF2020) ||
+		   rt2x00_rf(rt2x00dev, RF3021) ||
+		   rt2x00_rf(rt2x00dev, RF3022)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_302x);
 		spec->channels = rf_vals_302x;
 	}
@@ -2069,7 +2065,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize HT information.
 	 */
-	if (!rt2x00_rf(chip, RF2020))
+	if (!rt2x00_rf(rt2x00dev, RF2020))
 		spec->ht.ht_supported = true;
 	else
 		spec->ht.ht_supported = false;
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 2f9deddaf75b..b93eabb4fbe1 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1121,8 +1121,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * This device requires firmware.
 	 */
-	if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
-	    !rt2x00_rt(&rt2x00dev->chip, RT3052))
+	if (!rt2x00_rt(rt2x00dev, RT2880) && !rt2x00_rt(rt2x00dev, RT3052))
 		__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 40295b454ff6..411655ecaf3a 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -92,7 +92,7 @@ static bool rt2800usb_check_crc(const u8 *data, const size_t len)
 static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 				    const u8 *data, const size_t len)
 {
-	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+	u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
 	size_t offset = 0;
 
 	/*
@@ -138,7 +138,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 	u32 offset;
 	u32 length;
-	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+	u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
 
 	/*
 	 * Check which section of the firmware we need.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 194dae01d0c3..a664a999b2b0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -937,25 +937,25 @@ static inline void rt2x00_print_chip(struct rt2x00_dev *rt2x00dev)
 	     rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
 }
 
-static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
+static inline char rt2x00_rt(struct rt2x00_dev *rt2x00dev, const u16 rt)
 {
-	return (chipset->rt == chip);
+	return (rt2x00dev->chip.rt == rt);
 }
 
-static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip)
+static inline char rt2x00_rf(struct rt2x00_dev *rt2x00dev, const u16 rf)
 {
-	return (chipset->rf == chip);
+	return (rt2x00dev->chip.rf == rf);
 }
 
-static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
+static inline u32 rt2x00_rev(struct rt2x00_dev *rt2x00dev)
 {
-	return chipset->rev;
+	return rt2x00dev->chip.rev;
 }
 
-static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset,
+static inline bool rt2x00_check_rev(struct rt2x00_dev *rt2x00dev,
 				    const u32 mask, const u32 rev)
 {
-	return ((chipset->rev & mask) == rev);
+	return ((rt2x00dev->chip.rev & mask) == rev);
 }
 
 static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
@@ -964,20 +964,20 @@ static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
 	rt2x00dev->chip.intf = intf;
 }
 
-static inline bool rt2x00_intf(const struct rt2x00_chip *chipset,
+static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev,
 			       enum rt2x00_chip_intf intf)
 {
-	return (chipset->intf == intf);
+	return (rt2x00dev->chip.intf == intf);
 }
 
 static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev)
 {
-	return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_PCI);
+	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
 }
 
 static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev)
 {
-	return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_USB);
+	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
 }
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 0ca589306d71..c353b497a65d 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -637,8 +637,7 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 	rt61pci_bbp_read(rt2x00dev, 4, &r4);
 	rt61pci_bbp_read(rt2x00dev, 77, &r77);
 
-	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
-			  rt2x00_rf(&rt2x00dev->chip, RF5325));
+	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF5325));
 
 	/*
 	 * Configure the RX antenna.
@@ -684,8 +683,7 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 	rt61pci_bbp_read(rt2x00dev, 4, &r4);
 	rt61pci_bbp_read(rt2x00dev, 77, &r77);
 
-	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
-			  rt2x00_rf(&rt2x00dev->chip, RF2529));
+	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529));
 	rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 			  !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
 
@@ -833,12 +831,11 @@ static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5325))
+	if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325))
 		rt61pci_config_antenna_5x(rt2x00dev, ant);
-	else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
+	else if (rt2x00_rf(rt2x00dev, RF2527))
 		rt61pci_config_antenna_2x(rt2x00dev, ant);
-	else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
+	else if (rt2x00_rf(rt2x00dev, RF2529)) {
 		if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
 			rt61pci_config_antenna_2x(rt2x00dev, ant);
 		else
@@ -879,8 +876,7 @@ static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 
-	smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-		  rt2x00_rf(&rt2x00dev->chip, RF2527));
+	smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
 
 	rt61pci_bbp_read(rt2x00dev, 3, &r3);
 	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
@@ -2302,10 +2298,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2527) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2529)) {
+	if (!rt2x00_rf(rt2x00dev, RF5225) &&
+	    !rt2x00_rf(rt2x00dev, RF5325) &&
+	    !rt2x00_rf(rt2x00dev, RF2527) &&
+	    !rt2x00_rf(rt2x00dev, RF2529)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2360,7 +2356,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * the antenna settings should be gathered from the NIC
 	 * eeprom word.
 	 */
-	if (rt2x00_rf(&rt2x00dev->chip, RF2529) &&
+	if (rt2x00_rf(rt2x00dev, RF2529) &&
 	    !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
 		rt2x00dev->default_ant.rx =
 		    ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED);
@@ -2571,8 +2567,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		spec->channels = rf_vals_seq;
 	}
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5325)) {
+	if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_seq);
 	}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6ce88d3c3b65..a02691294395 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -136,8 +136,8 @@ static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
 		 * all others contain 20 bits.
 		 */
 		rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS,
-				   20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-					 rt2x00_rf(&rt2x00dev->chip, RF2527)));
+				   20 + (rt2x00_rf(rt2x00dev, RF5225) ||
+					 rt2x00_rf(rt2x00dev, RF2527)));
 		rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 		rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 
@@ -741,11 +741,9 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5225))
+	if (rt2x00_rf(rt2x00dev, RF5226) || rt2x00_rf(rt2x00dev, RF5225))
 		rt73usb_config_antenna_5x(rt2x00dev, ant);
-	else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
-		 rt2x00_rf(&rt2x00dev->chip, RF2527))
+	else if (rt2x00_rf(rt2x00dev, RF2528) || rt2x00_rf(rt2x00dev, RF2527))
 		rt73usb_config_antenna_2x(rt2x00dev, ant);
 }
 
@@ -779,8 +777,7 @@ static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 
-	smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-		  rt2x00_rf(&rt2x00dev->chip, RF2527));
+	smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
 
 	rt73usb_bbp_read(rt2x00dev, 3, &r3);
 	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
@@ -1210,8 +1207,7 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
 
 	reg = 0x000023b0;
-	if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF2527))
+	if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527))
 		rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
 	rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg);
 
@@ -1827,16 +1823,16 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
-	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0x25730) ||
+	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
+	if (!rt2x00_rf(rt2x00dev, RF5226) &&
+	    !rt2x00_rf(rt2x00dev, RF2528) &&
+	    !rt2x00_rf(rt2x00dev, RF5225) &&
+	    !rt2x00_rf(rt2x00dev, RF2527)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2081,17 +2077,17 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
+	if (rt2x00_rf(rt2x00dev, RF2528)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
 		spec->channels = rf_vals_bg_2528;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
+	} else if (rt2x00_rf(rt2x00dev, RF5226)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_5226);
 		spec->channels = rf_vals_5226;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2527)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals_5225_2527;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
+	} else if (rt2x00_rf(rt2x00dev, RF5225)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
 		spec->channels = rf_vals_5225_2527;
-- 
cgit v1.2.3


From 643aab6733799586c798a7b54b85c34d587b25e3 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 22 Dec 2009 18:13:04 -0500
Subject: rtl8180: remove priv->mode

It is only checked in add_interface, and there it is easily replaced
with a check of priv->vif.  If that information should become necessary,
it is available in vif->type anyway.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180.h     |  1 -
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 14 +++++---------
 2 files changed, 5 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180.h
index 8721282a8185..de3844fe06d8 100644
--- a/drivers/net/wireless/rtl818x/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180.h
@@ -60,7 +60,6 @@ struct rtl8180_priv {
 	struct rtl818x_csr __iomem *map;
 	const struct rtl818x_rf_ops *rf;
 	struct ieee80211_vif *vif;
-	int mode;
 
 	/* rtl8180 driver specific */
 	spinlock_t lock;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 8a40a1439984..f01f1ef9e3be 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -82,8 +82,6 @@ static const struct ieee80211_channel rtl818x_channels[] = {
 };
 
 
-
-
 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
 {
 	struct rtl8180_priv *priv = dev->priv;
@@ -615,7 +613,6 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	reg |= RTL818X_CMD_TX_ENABLE;
 	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
 
-	priv->mode = NL80211_IFTYPE_MONITOR;
 	return 0;
 
  err_free_rings:
@@ -633,8 +630,6 @@ static void rtl8180_stop(struct ieee80211_hw *dev)
 	u8 reg;
 	int i;
 
-	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
-
 	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CMD);
@@ -661,12 +656,14 @@ static int rtl8180_add_interface(struct ieee80211_hw *dev,
 {
 	struct rtl8180_priv *priv = dev->priv;
 
-	if (priv->mode != NL80211_IFTYPE_MONITOR)
-		return -EOPNOTSUPP;
+	/*
+	 * We only support one active interface at a time.
+	 */
+	if (priv->vif)
+		return -EBUSY;
 
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
-		priv->mode = conf->type;
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -688,7 +685,6 @@ static void rtl8180_remove_interface(struct ieee80211_hw *dev,
 				     struct ieee80211_if_init_conf *conf)
 {
 	struct rtl8180_priv *priv = dev->priv;
-	priv->mode = NL80211_IFTYPE_MONITOR;
 	priv->vif = NULL;
 }
 
-- 
cgit v1.2.3


From d30506e0357e5448c7d38bb3739c451dbe4c174e Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 22 Dec 2009 18:13:05 -0500
Subject: rtl8187: remove priv->mode

It is checked in add_interface, but there it is easily replaced with
a check of priv->vif.  If that information should become necessary,
it is available in vif->type anyway.

It is also checked in led_turn_on and led_turn_off, where I made the
substitutions as described above.  Of course, these checks seem to
have been incorrect since the driver was using NL80211_IFTYPE_MONITOR
to indicate no interface rather than NL80211_IFTYPE_UNSPECIFIED.
Anyway, I think these checks may be extraneous...?

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187.h      | 2 +-
 drivers/net/wireless/rtl818x/rtl8187_dev.c  | 5 +----
 drivers/net/wireless/rtl818x/rtl8187_leds.c | 4 ++--
 3 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index 6af0f3f71f3a..6bb32112e65c 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -92,7 +92,7 @@ struct rtl8187_priv {
 	struct rtl818x_csr *map;
 	const struct rtl818x_rf_ops *rf;
 	struct ieee80211_vif *vif;
-	int mode;
+
 	/* The mutex protects the TX loopback state.
 	 * Any attempt to set channels concurrently locks the device.
 	 */
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index bc5726dd5fe4..1cb0eff46223 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1025,12 +1025,11 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 	int ret = -EOPNOTSUPP;
 
 	mutex_lock(&priv->conf_mutex);
-	if (priv->mode != NL80211_IFTYPE_MONITOR)
+	if (priv->vif)
 		goto exit;
 
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
-		priv->mode = conf->type;
 		break;
 	default:
 		goto exit;
@@ -1055,7 +1054,6 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev,
 {
 	struct rtl8187_priv *priv = dev->priv;
 	mutex_lock(&priv->conf_mutex);
-	priv->mode = NL80211_IFTYPE_MONITOR;
 	priv->vif = NULL;
 	mutex_unlock(&priv->conf_mutex);
 }
@@ -1365,7 +1363,6 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
 
 
-	priv->mode = NL80211_IFTYPE_MONITOR;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		     IEEE80211_HW_SIGNAL_DBM |
 		     IEEE80211_HW_RX_INCLUDES_FCS;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index ded44c045eb2..f82aa8b4bdde 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -33,7 +33,7 @@ static void led_turn_on(struct work_struct *work)
 	struct rtl8187_led *led = &priv->led_tx;
 
 	/* Don't change the LED, when the device is down. */
-	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
 		return ;
 
 	/* Skip if the LED is not registered. */
@@ -71,7 +71,7 @@ static void led_turn_off(struct work_struct *work)
 	struct rtl8187_led *led = &priv->led_tx;
 
 	/* Don't change the LED, when the device is down. */
-	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
 		return ;
 
 	/* Skip if the LED is not registered. */
-- 
cgit v1.2.3


From a80f7c0b088187c8471b441d461e937991870661 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 23 Dec 2009 13:15:32 +0100
Subject: mac80211: introduce flush operation

We've long lacked a good confirmation that frames
have really gone out, e.g. before going off-channel
for a scan. Add a flush() operation that drivers
can implement to provide that confirmation, and use
it in a few places:
 * before scanning sends the nullfunc frames
 * after scanning sends the nullfunc frames, if any
 * when going idle, to send any pending frames

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 11 +++++++++++
 include/net/mac80211.h                |  5 +++++
 net/mac80211/driver-ops.h             |  7 +++++++
 net/mac80211/driver-trace.h           | 21 +++++++++++++++++++++
 net/mac80211/iface.c                  |  2 ++
 net/mac80211/scan.c                   | 13 +++++++++++--
 6 files changed, 57 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 718a5f198c30..4dee69a38c1d 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -896,6 +896,16 @@ static int mac80211_hwsim_ampdu_action(struct ieee80211_hw *hw,
 	return 0;
 }
 
+static void mac80211_hwsim_flush(struct ieee80211_hw *hw, bool drop)
+{
+	/*
+	 * In this special case, there's nothing we need to
+	 * do because hwsim does transmission synchronously.
+	 * In the future, when it does transmissions via
+	 * userspace, we may need to do something.
+	 */
+}
+
 
 static const struct ieee80211_ops mac80211_hwsim_ops =
 {
@@ -912,6 +922,7 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 	.conf_tx = mac80211_hwsim_conf_tx,
 	CFG80211_TESTMODE_CMD(mac80211_hwsim_testmode_cmd)
 	.ampdu_action = mac80211_hwsim_ampdu_action,
+	.flush = mac80211_hwsim_flush,
 };
 
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 494ac69ff477..77ea34b03285 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1545,6 +1545,10 @@ enum ieee80211_ampdu_mlme_action {
  *	and need to call wiphy_rfkill_set_hw_state() in the callback.
  *
  * @testmode_cmd: Implement a cfg80211 test mode command.
+ *
+ * @flush: Flush all pending frames from the hardware queue, making sure
+ *	that the hardware queues are empty. If the parameter @drop is set
+ *	to %true, pending frames may be dropped.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1601,6 +1605,7 @@ struct ieee80211_ops {
 #ifdef CONFIG_NL80211_TESTMODE
 	int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
 #endif
+	void (*flush)(struct ieee80211_hw *hw, bool drop);
 };
 
 /**
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 727e4cf7b8a6..cbe133bcdf34 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -259,4 +259,11 @@ static inline void drv_rfkill_poll(struct ieee80211_local *local)
 	if (local->ops->rfkill_poll)
 		local->ops->rfkill_poll(&local->hw);
 }
+
+static inline void drv_flush(struct ieee80211_local *local, bool drop)
+{
+	trace_drv_flush(local, drop);
+	if (local->ops->flush)
+		local->ops->flush(&local->hw, drop);
+}
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 7a849b920165..977cc7528bc6 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -690,6 +690,27 @@ TRACE_EVENT(drv_ampdu_action,
 		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->action, __entry->tid, __entry->ret
 	)
 );
+
+TRACE_EVENT(drv_flush,
+	TP_PROTO(struct ieee80211_local *local, bool drop),
+
+	TP_ARGS(local, drop),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(bool, drop)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->drop = drop;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " drop:%d",
+		LOCAL_PR_ARG, __entry->drop
+	)
+);
 #endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
 
 #undef TRACE_INCLUDE_PATH
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 1ceca14331d4..389dc8d880f3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -917,6 +917,8 @@ static u32 ieee80211_idle_on(struct ieee80211_local *local)
 	       wiphy_name(local->hw.wiphy));
 #endif
 
+	drv_flush(local, false);
+
 	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
 	return IEEE80211_CONF_CHANGE_IDLE;
 }
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index ae1830056521..d98c45e5528b 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -418,9 +418,10 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local)
 	local->next_scan_state = SCAN_DECISION;
 	local->scan_channel_idx = 0;
 
+	drv_flush(local, false);
+
 	ieee80211_configure_filter(local);
 
-	/* TODO: start scan as soon as all nullfunc frames are ACKed */
 	ieee80211_queue_delayed_work(&local->hw,
 				     &local->scan_work,
 				     IEEE80211_CHANNEL_TIME);
@@ -584,8 +585,16 @@ static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *loca
 
 	__set_bit(SCAN_OFF_CHANNEL, &local->scanning);
 
+	/*
+	 * What if the nullfunc frames didn't arrive?
+	 */
+	drv_flush(local, false);
+	if (local->ops->flush)
+		*next_delay = 0;
+	else
+		*next_delay = HZ / 10;
+
 	/* advance to the next channel to be scanned */
-	*next_delay = HZ / 10;
 	local->next_scan_state = SCAN_SET_CHANNEL;
 }
 
-- 
cgit v1.2.3


From 1ed32e4fc8cfc9656cc1101e7f9617d485fcbe7b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 23 Dec 2009 13:15:45 +0100
Subject: mac80211: remove struct ieee80211_if_init_conf

All its members (vif, mac_addr, type) are now available
in the vif struct directly, so we can pass that instead
of the conf struct. I generated this patch (except the
mac80211 and header file changes) with this semantic
patch:

@@
identifier conf, fn, hw;
type tp;
@@
tp fn(struct ieee80211_hw *hw,
-struct ieee80211_if_init_conf *conf)
+struct ieee80211_vif *vif)
{
<...
(
-conf->type
+vif->type
|
-conf->mac_addr
+vif->addr
|
-conf->vif
+vif
)
...>
}

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/adm8211.c             | 12 +++----
 drivers/net/wireless/at76c50x-usb.c        |  6 ++--
 drivers/net/wireless/ath/ar9170/main.c     |  8 ++---
 drivers/net/wireless/ath/ath5k/base.c      | 18 +++++-----
 drivers/net/wireless/ath/ath9k/main.c      | 28 +++++++--------
 drivers/net/wireless/b43/main.c            | 26 +++++++-------
 drivers/net/wireless/b43legacy/main.c      | 24 ++++++-------
 drivers/net/wireless/iwlwifi/iwl-core.c    | 20 +++++------
 drivers/net/wireless/iwlwifi/iwl-core.h    |  4 +--
 drivers/net/wireless/libertas_tf/main.c    | 10 +++---
 drivers/net/wireless/mac80211_hwsim.c      | 18 +++++-----
 drivers/net/wireless/mwl8k.c               | 14 ++++----
 drivers/net/wireless/p54/main.c            | 12 +++----
 drivers/net/wireless/rt2x00/rt2x00.h       |  4 +--
 drivers/net/wireless/rt2x00/rt2x00mac.c    | 26 +++++++-------
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 12 +++----
 drivers/net/wireless/rtl818x/rtl8187_dev.c | 10 +++---
 drivers/net/wireless/wl12xx/wl1251_main.c  | 14 ++++----
 drivers/net/wireless/wl12xx/wl1271_main.c  | 10 +++---
 drivers/net/wireless/zd1211rw/zd_mac.c     | 10 +++---
 include/net/mac80211.h                     | 57 ++++++++----------------------
 net/mac80211/driver-ops.h                  | 12 +++----
 net/mac80211/iface.c                       | 14 ++------
 net/mac80211/pm.c                          |  6 +---
 net/mac80211/util.c                        |  9 ++---
 25 files changed, 170 insertions(+), 214 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 39410016b4ff..e1f04bb437e3 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1400,15 +1400,15 @@ static void adm8211_configure_filter(struct ieee80211_hw *dev,
 }
 
 static int adm8211_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
+				 struct ieee80211_vif *vif)
 {
 	struct adm8211_priv *priv = dev->priv;
 	if (priv->mode != NL80211_IFTYPE_MONITOR)
 		return -EOPNOTSUPP;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
-		priv->mode = conf->type;
+		priv->mode = vif->type;
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -1416,8 +1416,8 @@ static int adm8211_add_interface(struct ieee80211_hw *dev,
 
 	ADM8211_IDLE();
 
-	ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)conf->mac_addr));
-	ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
+	ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)vif->addr));
+	ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(vif->addr + 4)));
 
 	adm8211_update_mode(dev);
 
@@ -1427,7 +1427,7 @@ static int adm8211_add_interface(struct ieee80211_hw *dev,
 }
 
 static void adm8211_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_if_init_conf *conf)
+				     struct ieee80211_vif *vif)
 {
 	struct adm8211_priv *priv = dev->priv;
 	priv->mode = NL80211_IFTYPE_MONITOR;
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 2517364d3ebe..0fb419936dff 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1789,7 +1789,7 @@ static void at76_mac80211_stop(struct ieee80211_hw *hw)
 }
 
 static int at76_add_interface(struct ieee80211_hw *hw,
-			      struct ieee80211_if_init_conf *conf)
+			      struct ieee80211_vif *vif)
 {
 	struct at76_priv *priv = hw->priv;
 	int ret = 0;
@@ -1798,7 +1798,7 @@ static int at76_add_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mtx);
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		priv->iw_mode = IW_MODE_INFRA;
 		break;
@@ -1814,7 +1814,7 @@ exit:
 }
 
 static void at76_remove_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_if_init_conf *conf)
+				  struct ieee80211_vif *vif)
 {
 	at76_dbg(DBG_MAC80211, "%s()", __func__);
 }
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 20f04ab2b13e..4d27f7f67c76 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1939,7 +1939,7 @@ err_free:
 }
 
 static int ar9170_op_add_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct ar9170 *ar = hw->priv;
 	struct ath_common *common = &ar->common;
@@ -1952,8 +1952,8 @@ static int ar9170_op_add_interface(struct ieee80211_hw *hw,
 		goto unlock;
 	}
 
-	ar->vif = conf->vif;
-	memcpy(common->macaddr, conf->mac_addr, ETH_ALEN);
+	ar->vif = vif;
+	memcpy(common->macaddr, vif->addr, ETH_ALEN);
 
 	if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
 		ar->rx_software_decryption = true;
@@ -1973,7 +1973,7 @@ unlock:
 }
 
 static void ar9170_op_remove_interface(struct ieee80211_hw *hw,
-				       struct ieee80211_if_init_conf *conf)
+				       struct ieee80211_vif *vif)
 {
 	struct ar9170 *ar = hw->priv;
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index a4c086f069b1..20c7e5b450aa 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -225,9 +225,9 @@ static int ath5k_reset_wake(struct ath5k_softc *sc);
 static int ath5k_start(struct ieee80211_hw *hw);
 static void ath5k_stop(struct ieee80211_hw *hw);
 static int ath5k_add_interface(struct ieee80211_hw *hw,
-		struct ieee80211_if_init_conf *conf);
+		struct ieee80211_vif *vif);
 static void ath5k_remove_interface(struct ieee80211_hw *hw,
-		struct ieee80211_if_init_conf *conf);
+		struct ieee80211_vif *vif);
 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
 static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
 				   int mc_count, struct dev_addr_list *mc_list);
@@ -2785,7 +2785,7 @@ static void ath5k_stop(struct ieee80211_hw *hw)
 }
 
 static int ath5k_add_interface(struct ieee80211_hw *hw,
-		struct ieee80211_if_init_conf *conf)
+		struct ieee80211_vif *vif)
 {
 	struct ath5k_softc *sc = hw->priv;
 	int ret;
@@ -2796,22 +2796,22 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		goto end;
 	}
 
-	sc->vif = conf->vif;
+	sc->vif = vif;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_MONITOR:
-		sc->opmode = conf->type;
+		sc->opmode = vif->type;
 		break;
 	default:
 		ret = -EOPNOTSUPP;
 		goto end;
 	}
 
-	ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
+	ath5k_hw_set_lladdr(sc->ah, vif->addr);
 	ath5k_mode_setup(sc);
 
 	ret = 0;
@@ -2822,13 +2822,13 @@ end:
 
 static void
 ath5k_remove_interface(struct ieee80211_hw *hw,
-			struct ieee80211_if_init_conf *conf)
+			struct ieee80211_vif *vif)
 {
 	struct ath5k_softc *sc = hw->priv;
 	u8 mac[ETH_ALEN] = {};
 
 	mutex_lock(&sc->lock);
-	if (sc->vif != conf->vif)
+	if (sc->vif != vif)
 		goto end;
 
 	ath5k_hw_set_lladdr(sc->ah, mac);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3f5b887d0fcd..446bd23756e5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2534,12 +2534,12 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 }
 
 static int ath9k_add_interface(struct ieee80211_hw *hw,
-			       struct ieee80211_if_init_conf *conf)
+			       struct ieee80211_vif *vif)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_vif *avp = (void *)conf->vif->drv_priv;
+	struct ath_vif *avp = (void *)vif->drv_priv;
 	enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
 	int ret = 0;
 
@@ -2551,7 +2551,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		ic_opmode = NL80211_IFTYPE_STATION;
 		break;
@@ -2562,11 +2562,11 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 			ret = -ENOBUFS;
 			goto out;
 		}
-		ic_opmode = conf->type;
+		ic_opmode = vif->type;
 		break;
 	default:
 		ath_print(common, ATH_DBG_FATAL,
-			"Interface type %d not yet supported\n", conf->type);
+			"Interface type %d not yet supported\n", vif->type);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -2598,18 +2598,18 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	 * Enable MIB interrupts when there are hardware phy counters.
 	 * Note we only do this (at the moment) for station mode.
 	 */
-	if ((conf->type == NL80211_IFTYPE_STATION) ||
-	    (conf->type == NL80211_IFTYPE_ADHOC) ||
-	    (conf->type == NL80211_IFTYPE_MESH_POINT)) {
+	if ((vif->type == NL80211_IFTYPE_STATION) ||
+	    (vif->type == NL80211_IFTYPE_ADHOC) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
 		sc->imask |= ATH9K_INT_MIB;
 		sc->imask |= ATH9K_INT_TSFOOR;
 	}
 
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-	if (conf->type == NL80211_IFTYPE_AP    ||
-	    conf->type == NL80211_IFTYPE_ADHOC ||
-	    conf->type == NL80211_IFTYPE_MONITOR)
+	if (vif->type == NL80211_IFTYPE_AP    ||
+	    vif->type == NL80211_IFTYPE_ADHOC ||
+	    vif->type == NL80211_IFTYPE_MONITOR)
 		ath_start_ani(common);
 
 out:
@@ -2618,12 +2618,12 @@ out:
 }
 
 static void ath9k_remove_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_vif *avp = (void *)conf->vif->drv_priv;
+	struct ath_vif *avp = (void *)vif->drv_priv;
 	int i;
 
 	ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
@@ -2644,7 +2644,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	sc->sc_flags &= ~SC_OP_BEACONS;
 
 	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
-		if (sc->beacon.bslot[i] == conf->vif) {
+		if (sc->beacon.bslot[i] == vif) {
 			printk(KERN_DEBUG "%s: vif had allocated beacon "
 			       "slot\n", __func__);
 			sc->beacon.bslot[i] = NULL;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b0b5ce950008..6634a77fc766 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4391,7 +4391,7 @@ err_busdown:
 }
 
 static int b43_op_add_interface(struct ieee80211_hw *hw,
-				struct ieee80211_if_init_conf *conf)
+				struct ieee80211_vif *vif)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
@@ -4399,24 +4399,24 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
 
 	/* TODO: allow WDS/AP devices to coexist */
 
-	if (conf->type != NL80211_IFTYPE_AP &&
-	    conf->type != NL80211_IFTYPE_MESH_POINT &&
-	    conf->type != NL80211_IFTYPE_STATION &&
-	    conf->type != NL80211_IFTYPE_WDS &&
-	    conf->type != NL80211_IFTYPE_ADHOC)
+	if (vif->type != NL80211_IFTYPE_AP &&
+	    vif->type != NL80211_IFTYPE_MESH_POINT &&
+	    vif->type != NL80211_IFTYPE_STATION &&
+	    vif->type != NL80211_IFTYPE_WDS &&
+	    vif->type != NL80211_IFTYPE_ADHOC)
 		return -EOPNOTSUPP;
 
 	mutex_lock(&wl->mutex);
 	if (wl->operating)
 		goto out_mutex_unlock;
 
-	b43dbg(wl, "Adding Interface type %d\n", conf->type);
+	b43dbg(wl, "Adding Interface type %d\n", vif->type);
 
 	dev = wl->current_dev;
 	wl->operating = 1;
-	wl->vif = conf->vif;
-	wl->if_type = conf->type;
-	memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+	wl->vif = vif;
+	wl->if_type = vif->type;
+	memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
 
 	b43_adjust_opmode(dev);
 	b43_set_pretbtt(dev);
@@ -4431,17 +4431,17 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
 }
 
 static void b43_op_remove_interface(struct ieee80211_hw *hw,
-				    struct ieee80211_if_init_conf *conf)
+				    struct ieee80211_vif *vif)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev = wl->current_dev;
 
-	b43dbg(wl, "Removing Interface type %d\n", conf->type);
+	b43dbg(wl, "Removing Interface type %d\n", vif->type);
 
 	mutex_lock(&wl->mutex);
 
 	B43_WARN_ON(!wl->operating);
-	B43_WARN_ON(wl->vif != conf->vif);
+	B43_WARN_ON(wl->vif != vif);
 	wl->vif = NULL;
 
 	wl->operating = 0;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index ab6a18c2e9d9..494017e4fcc9 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3361,7 +3361,7 @@ err_kfree_lo_control:
 }
 
 static int b43legacy_op_add_interface(struct ieee80211_hw *hw,
-				      struct ieee80211_if_init_conf *conf)
+				      struct ieee80211_vif *vif)
 {
 	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
 	struct b43legacy_wldev *dev;
@@ -3370,23 +3370,23 @@ static int b43legacy_op_add_interface(struct ieee80211_hw *hw,
 
 	/* TODO: allow WDS/AP devices to coexist */
 
-	if (conf->type != NL80211_IFTYPE_AP &&
-	    conf->type != NL80211_IFTYPE_STATION &&
-	    conf->type != NL80211_IFTYPE_WDS &&
-	    conf->type != NL80211_IFTYPE_ADHOC)
+	if (vif->type != NL80211_IFTYPE_AP &&
+	    vif->type != NL80211_IFTYPE_STATION &&
+	    vif->type != NL80211_IFTYPE_WDS &&
+	    vif->type != NL80211_IFTYPE_ADHOC)
 		return -EOPNOTSUPP;
 
 	mutex_lock(&wl->mutex);
 	if (wl->operating)
 		goto out_mutex_unlock;
 
-	b43legacydbg(wl, "Adding Interface type %d\n", conf->type);
+	b43legacydbg(wl, "Adding Interface type %d\n", vif->type);
 
 	dev = wl->current_dev;
 	wl->operating = 1;
-	wl->vif = conf->vif;
-	wl->if_type = conf->type;
-	memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+	wl->vif = vif;
+	wl->if_type = vif->type;
+	memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
 
 	spin_lock_irqsave(&wl->irq_lock, flags);
 	b43legacy_adjust_opmode(dev);
@@ -3403,18 +3403,18 @@ static int b43legacy_op_add_interface(struct ieee80211_hw *hw,
 }
 
 static void b43legacy_op_remove_interface(struct ieee80211_hw *hw,
-					  struct ieee80211_if_init_conf *conf)
+					  struct ieee80211_vif *vif)
 {
 	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
 	struct b43legacy_wldev *dev = wl->current_dev;
 	unsigned long flags;
 
-	b43legacydbg(wl, "Removing Interface type %d\n", conf->type);
+	b43legacydbg(wl, "Removing Interface type %d\n", vif->type);
 
 	mutex_lock(&wl->mutex);
 
 	B43legacy_WARN_ON(!wl->operating);
-	B43legacy_WARN_ON(wl->vif != conf->vif);
+	B43legacy_WARN_ON(wl->vif != vif);
 	wl->vif = NULL;
 
 	wl->operating = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index e3b96b48b7fe..14f482960d7f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2584,12 +2584,12 @@ int iwl_set_mode(struct iwl_priv *priv, int mode)
 EXPORT_SYMBOL(iwl_set_mode);
 
 int iwl_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf)
+				 struct ieee80211_vif *vif)
 {
 	struct iwl_priv *priv = hw->priv;
 	unsigned long flags;
 
-	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
+	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", vif->type);
 
 	if (priv->vif) {
 		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
@@ -2597,19 +2597,19 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw,
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
-	priv->vif = conf->vif;
-	priv->iw_mode = conf->type;
+	priv->vif = vif;
+	priv->iw_mode = vif->type;
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	mutex_lock(&priv->mutex);
 
-	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
-		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+	if (vif->addr) {
+		IWL_DEBUG_MAC80211(priv, "Set %pM\n", vif->addr);
+		memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
 	}
 
-	if (iwl_set_mode(priv, conf->type) == -EAGAIN)
+	if (iwl_set_mode(priv, vif->type) == -EAGAIN)
 		/* we are not ready, will run again when ready */
 		set_bit(STATUS_MODE_PENDING, &priv->status);
 
@@ -2621,7 +2621,7 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw,
 EXPORT_SYMBOL(iwl_mac_add_interface);
 
 void iwl_mac_remove_interface(struct ieee80211_hw *hw,
-				     struct ieee80211_if_init_conf *conf)
+				     struct ieee80211_vif *vif)
 {
 	struct iwl_priv *priv = hw->priv;
 
@@ -2634,7 +2634,7 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 		iwlcore_commit_rxon(priv);
 	}
-	if (priv->vif == conf->vif) {
+	if (priv->vif == vif) {
 		priv->vif = NULL;
 		memset(priv->bssid, 0, ETH_ALEN);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index f7acbb32900a..1728f961dcba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -332,9 +332,9 @@ int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb);
 int iwl_commit_rxon(struct iwl_priv *priv);
 int iwl_set_mode(struct iwl_priv *priv, int mode);
 int iwl_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf);
+			  struct ieee80211_vif *vif);
 void iwl_mac_remove_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf);
+			      struct ieee80211_vif *vif);
 int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
 void iwl_config_ap(struct iwl_priv *priv);
 int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 019431d2f8a9..15a367680f59 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -318,14 +318,14 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
 }
 
 static int lbtf_op_add_interface(struct ieee80211_hw *hw,
-			struct ieee80211_if_init_conf *conf)
+			struct ieee80211_vif *vif)
 {
 	struct lbtf_private *priv = hw->priv;
 	if (priv->vif != NULL)
 		return -EOPNOTSUPP;
 
-	priv->vif = conf->vif;
-	switch (conf->type) {
+	priv->vif = vif;
+	switch (vif->type) {
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_AP:
 		lbtf_set_mode(priv, LBTF_AP_MODE);
@@ -337,12 +337,12 @@ static int lbtf_op_add_interface(struct ieee80211_hw *hw,
 		priv->vif = NULL;
 		return -EOPNOTSUPP;
 	}
-	lbtf_set_mac_address(priv, (u8 *) conf->mac_addr);
+	lbtf_set_mac_address(priv, (u8 *) vif->addr);
 	return 0;
 }
 
 static void lbtf_op_remove_interface(struct ieee80211_hw *hw,
-			struct ieee80211_if_init_conf *conf)
+			struct ieee80211_vif *vif)
 {
 	struct lbtf_private *priv = hw->priv;
 
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 4dee69a38c1d..84df3fcf37b3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -584,24 +584,24 @@ static void mac80211_hwsim_stop(struct ieee80211_hw *hw)
 
 
 static int mac80211_hwsim_add_interface(struct ieee80211_hw *hw,
-					struct ieee80211_if_init_conf *conf)
+					struct ieee80211_vif *vif)
 {
 	printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%pM)\n",
-	       wiphy_name(hw->wiphy), __func__, conf->type,
-	       conf->mac_addr);
-	hwsim_set_magic(conf->vif);
+	       wiphy_name(hw->wiphy), __func__, vif->type,
+	       vif->addr);
+	hwsim_set_magic(vif);
 	return 0;
 }
 
 
 static void mac80211_hwsim_remove_interface(
-	struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf)
+	struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
 	printk(KERN_DEBUG "%s:%s (type=%d mac_addr=%pM)\n",
-	       wiphy_name(hw->wiphy), __func__, conf->type,
-	       conf->mac_addr);
-	hwsim_check_magic(conf->vif);
-	hwsim_clear_magic(conf->vif);
+	       wiphy_name(hw->wiphy), __func__, vif->type,
+	       vif->addr);
+	hwsim_check_magic(vif);
+	hwsim_clear_magic(vif);
 }
 
 
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 97a95decf9a8..c1c6ecd0c5b3 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2835,7 +2835,7 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 }
 
 static int mwl8k_add_interface(struct ieee80211_hw *hw,
-				struct ieee80211_if_init_conf *conf)
+				struct ieee80211_vif *vif)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_vif *mwl8k_vif;
@@ -2849,7 +2849,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	/*
 	 * We only support managed interfaces for now.
 	 */
-	if (conf->type != NL80211_IFTYPE_STATION)
+	if (vif->type != NL80211_IFTYPE_STATION)
 		return -EINVAL;
 
 	/*
@@ -2865,24 +2865,24 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	}
 
 	/* Clean out driver private area */
-	mwl8k_vif = MWL8K_VIF(conf->vif);
+	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 
 	/* Set and save the mac address */
-	mwl8k_cmd_set_mac_addr(hw, conf->mac_addr);
-	memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
+	mwl8k_cmd_set_mac_addr(hw, vif->addr);
+	memcpy(mwl8k_vif->mac_addr, vif->addr, ETH_ALEN);
 
 	/* Set Initial sequence number to zero */
 	mwl8k_vif->seqno = 0;
 
-	priv->vif = conf->vif;
+	priv->vif = vif;
 	priv->current_channel = NULL;
 
 	return 0;
 }
 
 static void mwl8k_remove_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct mwl8k_priv *priv = hw->priv;
 
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 18012dbfb45d..26428e4c9c60 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -216,7 +216,7 @@ static void p54_stop(struct ieee80211_hw *dev)
 }
 
 static int p54_add_interface(struct ieee80211_hw *dev,
-			     struct ieee80211_if_init_conf *conf)
+			     struct ieee80211_vif *vif)
 {
 	struct p54_common *priv = dev->priv;
 
@@ -226,28 +226,28 @@ static int p54_add_interface(struct ieee80211_hw *dev,
 		return -EOPNOTSUPP;
 	}
 
-	priv->vif = conf->vif;
+	priv->vif = vif;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_MESH_POINT:
-		priv->mode = conf->type;
+		priv->mode = vif->type;
 		break;
 	default:
 		mutex_unlock(&priv->conf_mutex);
 		return -EOPNOTSUPP;
 	}
 
-	memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+	memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
 	p54_setup_mac(priv);
 	mutex_unlock(&priv->conf_mutex);
 	return 0;
 }
 
 static void p54_remove_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
+				 struct ieee80211_vif *vif)
 {
 	struct p54_common *priv = dev->priv;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index a664a999b2b0..b4c6e0a6d7e0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1019,9 +1019,9 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
 int rt2x00mac_start(struct ieee80211_hw *hw);
 void rt2x00mac_stop(struct ieee80211_hw *hw);
 int rt2x00mac_add_interface(struct ieee80211_hw *hw,
-			    struct ieee80211_if_init_conf *conf);
+			    struct ieee80211_vif *vif);
 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
-				struct ieee80211_if_init_conf *conf);
+				struct ieee80211_vif *vif);
 int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index de549c244ed8..00f1f939f1bb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -187,10 +187,10 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
 EXPORT_SYMBOL_GPL(rt2x00mac_stop);
 
 int rt2x00mac_add_interface(struct ieee80211_hw *hw,
-			    struct ieee80211_if_init_conf *conf)
+			    struct ieee80211_vif *vif)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct rt2x00_intf *intf = vif_to_intf(conf->vif);
+	struct rt2x00_intf *intf = vif_to_intf(vif);
 	struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON);
 	struct queue_entry *entry = NULL;
 	unsigned int i;
@@ -203,7 +203,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	    !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		return -ENODEV;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_AP:
 		/*
 		 * We don't support mixed combinations of
@@ -263,7 +263,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 * increase interface count and start initialization.
 	 */
 
-	if (conf->type == NL80211_IFTYPE_AP)
+	if (vif->type == NL80211_IFTYPE_AP)
 		rt2x00dev->intf_ap_count++;
 	else
 		rt2x00dev->intf_sta_count++;
@@ -273,16 +273,16 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	mutex_init(&intf->beacon_skb_mutex);
 	intf->beacon = entry;
 
-	if (conf->type == NL80211_IFTYPE_AP)
-		memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
-	memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
+	if (vif->type == NL80211_IFTYPE_AP)
+		memcpy(&intf->bssid, vif->addr, ETH_ALEN);
+	memcpy(&intf->mac, vif->addr, ETH_ALEN);
 
 	/*
 	 * The MAC adddress must be configured after the device
 	 * has been initialized. Otherwise the device can reset
 	 * the MAC registers.
 	 */
-	rt2x00lib_config_intf(rt2x00dev, intf, conf->type, intf->mac, NULL);
+	rt2x00lib_config_intf(rt2x00dev, intf, vif->type, intf->mac, NULL);
 
 	/*
 	 * Some filters depend on the current working mode. We can force
@@ -296,10 +296,10 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 EXPORT_SYMBOL_GPL(rt2x00mac_add_interface);
 
 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
-				struct ieee80211_if_init_conf *conf)
+				struct ieee80211_vif *vif)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct rt2x00_intf *intf = vif_to_intf(conf->vif);
+	struct rt2x00_intf *intf = vif_to_intf(vif);
 
 	/*
 	 * Don't allow interfaces to be remove while
@@ -307,11 +307,11 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 	 * no interface is present.
 	 */
 	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
-	    (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
-	    (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
+	    (vif->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
+	    (vif->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
 		return;
 
-	if (conf->type == NL80211_IFTYPE_AP)
+	if (vif->type == NL80211_IFTYPE_AP)
 		rt2x00dev->intf_ap_count--;
 	else
 		rt2x00dev->intf_sta_count--;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index f01f1ef9e3be..5a2b7199f5d5 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -652,7 +652,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev)
 }
 
 static int rtl8180_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
+				 struct ieee80211_vif *vif)
 {
 	struct rtl8180_priv *priv = dev->priv;
 
@@ -662,27 +662,27 @@ static int rtl8180_add_interface(struct ieee80211_hw *dev,
 	if (priv->vif)
 		return -EBUSY;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
-	priv->vif = conf->vif;
+	priv->vif = vif;
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
-			  le32_to_cpu(*(__le32 *)conf->mac_addr));
+			  le32_to_cpu(*(__le32 *)vif->addr));
 	rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
-			  le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
+			  le16_to_cpu(*(__le16 *)(vif->addr + 4)));
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
 	return 0;
 }
 
 static void rtl8180_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_if_init_conf *conf)
+				     struct ieee80211_vif *vif)
 {
 	struct rtl8180_priv *priv = dev->priv;
 	priv->vif = NULL;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 1cb0eff46223..f336c63053c1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1018,7 +1018,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 }
 
 static int rtl8187_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
+				 struct ieee80211_vif *vif)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	int i;
@@ -1028,7 +1028,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 	if (priv->vif)
 		goto exit;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		break;
 	default:
@@ -1036,12 +1036,12 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev,
 	}
 
 	ret = 0;
-	priv->vif = conf->vif;
+	priv->vif = vif;
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	for (i = 0; i < ETH_ALEN; i++)
 		rtl818x_iowrite8(priv, &priv->map->MAC[i],
-				 ((u8 *)conf->mac_addr)[i]);
+				 ((u8 *)vif->addr)[i]);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
 exit:
@@ -1050,7 +1050,7 @@ exit:
 }
 
 static void rtl8187_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_if_init_conf *conf)
+				     struct ieee80211_vif *vif)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	mutex_lock(&priv->conf_mutex);
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 6aeffbe9e401..4e373f3dbc43 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -511,13 +511,13 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
 }
 
 static int wl1251_op_add_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct wl1251 *wl = hw->priv;
 	int ret = 0;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
-		     conf->type, conf->mac_addr);
+		     vif->type, vif->addr);
 
 	mutex_lock(&wl->mutex);
 	if (wl->vif) {
@@ -525,9 +525,9 @@ static int wl1251_op_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	wl->vif = conf->vif;
+	wl->vif = vif;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		wl->bss_type = BSS_TYPE_STA_BSS;
 		break;
@@ -539,8 +539,8 @@ static int wl1251_op_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
-		memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+	if (memcmp(wl->mac_addr, vif->addr, ETH_ALEN)) {
+		memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
 		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
 		ret = wl1251_acx_station_id(wl);
 		if (ret < 0)
@@ -553,7 +553,7 @@ out:
 }
 
 static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
-					 struct ieee80211_if_init_conf *conf)
+					 struct ieee80211_vif *vif)
 {
 	struct wl1251 *wl = hw->priv;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 4a997381a8d0..e4867b895c43 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1039,13 +1039,13 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 }
 
 static int wl1271_op_add_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct wl1271 *wl = hw->priv;
 	int ret = 0;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
-		     conf->type, conf->mac_addr);
+		     vif->type, vif->addr);
 
 	mutex_lock(&wl->mutex);
 	if (wl->vif) {
@@ -1053,9 +1053,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	wl->vif = conf->vif;
+	wl->vif = vif;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		wl->bss_type = BSS_TYPE_STA_BSS;
 		break;
@@ -1075,7 +1075,7 @@ out:
 }
 
 static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
-					 struct ieee80211_if_init_conf *conf)
+					 struct ieee80211_vif *vif)
 {
 	struct wl1271 *wl = hw->priv;
 
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8a243732c519..c4f41d0016c5 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -872,7 +872,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 }
 
 static int zd_op_add_interface(struct ieee80211_hw *hw,
-				struct ieee80211_if_init_conf *conf)
+				struct ieee80211_vif *vif)
 {
 	struct zd_mac *mac = zd_hw_mac(hw);
 
@@ -880,22 +880,22 @@ static int zd_op_add_interface(struct ieee80211_hw *hw,
 	if (mac->type != NL80211_IFTYPE_UNSPECIFIED)
 		return -EOPNOTSUPP;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
-		mac->type = conf->type;
+		mac->type = vif->type;
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
-	return zd_write_mac_addr(&mac->chip, conf->mac_addr);
+	return zd_write_mac_addr(&mac->chip, vif->addr);
 }
 
 static void zd_op_remove_interface(struct ieee80211_hw *hw,
-				    struct ieee80211_if_init_conf *conf)
+				    struct ieee80211_vif *vif)
 {
 	struct zd_mac *mac = zd_hw_mac(hw);
 	mac->type = NL80211_IFTYPE_UNSPECIFIED;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 77ea34b03285..08d41357dcbe 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -701,33 +701,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
 	return false;
 }
 
-/**
- * struct ieee80211_if_init_conf - initial configuration of an interface
- *
- * @vif: pointer to a driver-use per-interface structure. The pointer
- *	itself is also used for various functions including
- *	ieee80211_beacon_get() and ieee80211_get_buffered_bc().
- * @type: one of &enum nl80211_iftype constants. Determines the type of
- *	added/removed interface.
- * @mac_addr: pointer to MAC address of the interface. This pointer is valid
- *	until the interface is removed (i.e. it cannot be used after
- *	remove_interface() callback was called for this interface).
- *
- * This structure is used in add_interface() and remove_interface()
- * callbacks of &struct ieee80211_hw.
- *
- * When you allow multiple interfaces to be added to your PHY, take care
- * that the hardware can actually handle multiple MAC addresses. However,
- * also take care that when there's no interface left with mac_addr != %NULL
- * you remove the MAC address from the device to avoid acknowledging packets
- * in pure monitor mode.
- */
-struct ieee80211_if_init_conf {
-	enum nl80211_iftype type;
-	struct ieee80211_vif *vif;
-	void *mac_addr;
-};
-
 /**
  * enum ieee80211_key_alg - key algorithm
  * @ALG_WEP: WEP40 or WEP104
@@ -1555,9 +1528,9 @@ struct ieee80211_ops {
 	int (*start)(struct ieee80211_hw *hw);
 	void (*stop)(struct ieee80211_hw *hw);
 	int (*add_interface)(struct ieee80211_hw *hw,
-			     struct ieee80211_if_init_conf *conf);
+			     struct ieee80211_vif *vif);
 	void (*remove_interface)(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf);
+				 struct ieee80211_vif *vif);
 	int (*config)(struct ieee80211_hw *hw, u32 changed);
 	void (*bss_info_changed)(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
@@ -1845,7 +1818,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
 /**
  * ieee80211_beacon_get_tim - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @tim_offset: pointer to variable that will receive the TIM IE offset.
  *	Set to 0 if invalid (in non-AP modes).
  * @tim_length: pointer to variable that will receive the TIM IE length,
@@ -1873,7 +1846,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 /**
  * ieee80211_beacon_get - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * See ieee80211_beacon_get_tim().
  */
@@ -1886,7 +1859,7 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 /**
  * ieee80211_rts_get - RTS frame generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @frame: pointer to the frame that is going to be protected by the RTS.
  * @frame_len: the frame length (in octets).
  * @frame_txctl: &struct ieee80211_tx_info of the frame.
@@ -1905,7 +1878,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 /**
  * ieee80211_rts_duration - Get the duration field for an RTS frame
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @frame_len: the length of the frame that is going to be protected by the RTS.
  * @frame_txctl: &struct ieee80211_tx_info of the frame.
  *
@@ -1920,7 +1893,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
 /**
  * ieee80211_ctstoself_get - CTS-to-self frame generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @frame: pointer to the frame that is going to be protected by the CTS-to-self.
  * @frame_len: the frame length (in octets).
  * @frame_txctl: &struct ieee80211_tx_info of the frame.
@@ -1940,7 +1913,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
 /**
  * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
  * @frame_txctl: &struct ieee80211_tx_info of the frame.
  *
@@ -1956,7 +1929,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
 /**
  * ieee80211_generic_frame_duration - Calculate the duration field for a frame
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @frame_len: the length of the frame.
  * @rate: the rate at which the frame is going to be transmitted.
  *
@@ -1971,7 +1944,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
 /**
  * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
  * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * Function for accessing buffered broadcast and multicast frames. If
  * hardware/firmware does not implement buffering of broadcast/multicast
@@ -2139,7 +2112,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
 
 /**
  * ieee80211_start_tx_ba_cb - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
  * @ra: receiver address of the BA session recipient.
  * @tid: the TID to BA on.
  *
@@ -2150,7 +2123,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid);
 
 /**
  * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
  * @ra: receiver address of the BA session recipient.
  * @tid: the TID to BA on.
  *
@@ -2178,7 +2151,7 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
 
 /**
  * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
  * @ra: receiver address of the BA session recipient.
  * @tid: the desired TID to BA on.
  *
@@ -2189,7 +2162,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid);
 
 /**
  * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
  * @ra: receiver address of the BA session recipient.
  * @tid: the desired TID to BA on.
  *
@@ -2268,7 +2241,7 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
 /**
  * ieee80211_beacon_loss - inform hardware does not receive beacons
  *
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * When beacon filtering is enabled with IEEE80211_HW_BEACON_FILTERING and
  * IEEE80211_CONF_PS is set, the driver needs to inform whenever the
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index cbe133bcdf34..bc7c8f55487a 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -36,18 +36,18 @@ static inline void drv_stop(struct ieee80211_local *local)
 }
 
 static inline int drv_add_interface(struct ieee80211_local *local,
-				    struct ieee80211_if_init_conf *conf)
+				    struct ieee80211_vif *vif)
 {
-	int ret = local->ops->add_interface(&local->hw, conf);
-	trace_drv_add_interface(local, vif_to_sdata(conf->vif), ret);
+	int ret = local->ops->add_interface(&local->hw, vif);
+	trace_drv_add_interface(local, vif_to_sdata(vif), ret);
 	return ret;
 }
 
 static inline void drv_remove_interface(struct ieee80211_local *local,
-					struct ieee80211_if_init_conf *conf)
+					struct ieee80211_vif *vif)
 {
-	local->ops->remove_interface(&local->hw, conf);
-	trace_drv_remove_interface(local, vif_to_sdata(conf->vif));
+	local->ops->remove_interface(&local->hw, vif);
+	trace_drv_remove_interface(local, vif_to_sdata(vif));
 }
 
 static inline int drv_config(struct ieee80211_local *local, u32 changed)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 7d410f15281a..00a1f4ccdaf1 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -96,7 +96,6 @@ static int ieee80211_open(struct net_device *dev)
 	struct ieee80211_sub_if_data *nsdata;
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
-	struct ieee80211_if_init_conf conf;
 	u32 changed = 0;
 	int res;
 	u32 hw_reconf_flags = 0;
@@ -248,10 +247,7 @@ static int ieee80211_open(struct net_device *dev)
 		ieee80211_configure_filter(local);
 		break;
 	default:
-		conf.vif = &sdata->vif;
-		conf.type = sdata->vif.type;
-		conf.mac_addr = sdata->vif.addr;
-		res = drv_add_interface(local, &conf);
+		res = drv_add_interface(local, &sdata->vif);
 		if (res)
 			goto err_stop;
 
@@ -334,7 +330,7 @@ static int ieee80211_open(struct net_device *dev)
 
 	return 0;
  err_del_interface:
-	drv_remove_interface(local, &conf);
+	drv_remove_interface(local, &sdata->vif);
  err_stop:
 	if (!local->open_count)
 		drv_stop(local);
@@ -349,7 +345,6 @@ static int ieee80211_stop(struct net_device *dev)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_if_init_conf conf;
 	struct sta_info *sta;
 	unsigned long flags;
 	struct sk_buff *skb, *tmp;
@@ -533,12 +528,9 @@ static int ieee80211_stop(struct net_device *dev)
 				BSS_CHANGED_BEACON_ENABLED);
 		}
 
-		conf.vif = &sdata->vif;
-		conf.type = sdata->vif.type;
-		conf.mac_addr = sdata->vif.addr;
 		/* disable all keys for as long as this netdev is down */
 		ieee80211_disable_keys(sdata);
-		drv_remove_interface(local, &conf);
+		drv_remove_interface(local, &sdata->vif);
 	}
 
 	sdata->bss = NULL;
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 913dc7e3b29e..47f818959ad7 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -10,7 +10,6 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_if_init_conf conf;
 	struct sta_info *sta;
 	unsigned long flags;
 
@@ -100,10 +99,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 		ieee80211_bss_info_change_notify(sdata,
 			BSS_CHANGED_BEACON_ENABLED);
 
-		conf.vif = &sdata->vif;
-		conf.type = sdata->vif.type;
-		conf.mac_addr = sdata->vif.addr;
-		drv_remove_interface(local, &conf);
+		drv_remove_interface(local, &sdata->vif);
 	}
 
 	/* stop hardware - this must stop RX */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 1fdb80ff9241..4b930308b1fb 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1075,7 +1075,6 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 {
 	struct ieee80211_hw *hw = &local->hw;
 	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_if_init_conf conf;
 	struct sta_info *sta;
 	unsigned long flags;
 	int res;
@@ -1094,12 +1093,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
 		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
-		    ieee80211_sdata_running(sdata)) {
-			conf.vif = &sdata->vif;
-			conf.type = sdata->vif.type;
-			conf.mac_addr = sdata->vif.addr;
-			res = drv_add_interface(local, &conf);
-		}
+		    ieee80211_sdata_running(sdata))
+			res = drv_add_interface(local, &sdata->vif);
 	}
 
 	/* add STAs back */
-- 
cgit v1.2.3


From 557b0bbd62389ab438424e9f895197607666ea4d Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:01:46 -0800
Subject: drivers/net/lib82596.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation instead of
space-separated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/lib82596.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index b117f7f8b194..b60efd4bd017 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1094,11 +1094,9 @@ static int __devinit i82596_probe(struct net_device *dev)
 		return i;
 	};
 
-	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx,",
-			      dev->name, dev->base_addr));
-	for (i = 0; i < 6; i++)
-		DEB(DEB_PROBE, printk(" %2.2X", dev->dev_addr[i]));
-	DEB(DEB_PROBE, printk(" IRQ %d.\n", dev->irq));
+	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx, %pM IRQ %d.\n",
+			      dev->name, dev->base_addr, dev->dev_addr,
+			      dev->irq));
 	DEB(DEB_INIT, printk(KERN_INFO
 			     "%s: dma at 0x%p (%d bytes), lp->scb at 0x%p\n",
 			     dev->name, dma, (int)sizeof(struct i596_dma),
-- 
cgit v1.2.3


From 753cdc3304f0612766a81cddab9d8af01fcf8218 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:02:29 -0800
Subject: drivers/net/igbvf/netdev.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igbvf/netdev.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index e9dd95f136aa..1326232c1d32 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2608,11 +2608,7 @@ static void igbvf_print_device_info(struct igbvf_adapter *adapter)
 	struct pci_dev *pdev = adapter->pdev;
 
 	dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n");
-	dev_info(&pdev->dev, "Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
-	         /* MAC address */
-	         netdev->dev_addr[0], netdev->dev_addr[1],
-	         netdev->dev_addr[2], netdev->dev_addr[3],
-	         netdev->dev_addr[4], netdev->dev_addr[5]);
+	dev_info(&pdev->dev, "Address: %pM\n", netdev->dev_addr);
 	dev_info(&pdev->dev, "MAC: %d\n", hw->mac.type);
 }
 
@@ -2777,11 +2773,8 @@ static int __devinit igbvf_probe(struct pci_dev *pdev,
 	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		dev_err(&pdev->dev, "Invalid MAC Address: "
-		        "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		        netdev->dev_addr[0], netdev->dev_addr[1],
-		        netdev->dev_addr[2], netdev->dev_addr[3],
-		        netdev->dev_addr[4], netdev->dev_addr[5]);
+		dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
+		        netdev->dev_addr);
 		err = -EIO;
 		goto err_hw_init;
 	}
-- 
cgit v1.2.3


From d649a2844e49ece6309cf28cb941ef64eb69228f Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:03:28 -0800
Subject: drivers/net/usb/rtl8150.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/rtl8150.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index f14d225404da..dfc7e9fec3ea 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -313,20 +313,17 @@ static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
 {
 	struct sockaddr *addr = p;
 	rtl8150_t *dev = netdev_priv(netdev);
-	int i;
 
 	if (netif_running(netdev))
 		return -EBUSY;
 
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-	dbg("%s: Setting MAC address to ", netdev->name);
-	for (i = 0; i < 5; i++)
-		dbg("%02X:", netdev->dev_addr[i]);
-	dbg("%02X\n", netdev->dev_addr[i]);
+	dbg("%s: Setting MAC address to %pM\n", netdev->name, netdev->dev_addr);
 	/* Set the IDR registers. */
 	set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr);
 #ifdef EEPROM_WRITE
 	{
+	int i;
 	u8 cr;
 	/* Get the CR contents. */
 	get_registers(dev, CR, 1, &cr);
-- 
cgit v1.2.3


From aa7c68a5f75cf04e79348e8baca67c7393d8f7e4 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:04:14 -0800
Subject: drivers/net/via-velocity.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/via-velocity.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 4ceb441f2687..cee8fa2d2a9f 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2702,10 +2702,8 @@ static void __devinit velocity_print_info(struct velocity_info *vptr)
 	struct net_device *dev = vptr->dev;
 
 	printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
-	printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
-		dev->name,
-		dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-		dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+	printk(KERN_INFO "%s: Ethernet Address: %pM\n",
+		dev->name, dev->dev_addr);
 }
 
 static u32 velocity_get_link(struct net_device *dev)
-- 
cgit v1.2.3


From 5491f3a5623129f3d4e0c62e691c2a5e56c75d41 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:04:53 -0800
Subject: drivers/net/xilinx_emaclite.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xilinx_emaclite.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 8c777ba4e2b3..f7fe1aa03b42 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -925,11 +925,7 @@ static int __devinit xemaclite_of_probe(struct of_device *ofdev,
 	/* Set the MAC address in the EmacLite device */
 	xemaclite_set_mac_address(lp, ndev->dev_addr);
 
-	dev_info(dev,
-		 "MAC address is now %2x:%2x:%2x:%2x:%2x:%2x\n",
-		 ndev->dev_addr[0], ndev->dev_addr[1],
-		 ndev->dev_addr[2], ndev->dev_addr[3],
-		 ndev->dev_addr[4], ndev->dev_addr[5]);
+	dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr);
 
 	ndev->netdev_ops = &xemaclite_netdev_ops;
 	ndev->flags &= ~IFF_MULTICAST;
-- 
cgit v1.2.3


From 3b8dff3622a813d093a8601dc90fb6f12183f87c Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:06:45 -0800
Subject: drivers/net/usb/catc.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/catc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 22b87e64a810..7d3fa06980c1 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -897,11 +897,9 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id
 		f5u011_rxmode(catc, catc->rxmode);
 	}
 	dbg("Init done.");
-	printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, ",
+	printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n",
 	       netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
-	       usbdev->bus->bus_name, usbdev->devpath);
-	for (i = 0; i < 5; i++) printk("%2.2x:", netdev->dev_addr[i]);
-	printk("%2.2x.\n", netdev->dev_addr[i]);
+	       usbdev->bus->bus_name, usbdev->devpath, netdev->dev_addr);
 	usb_set_intfdata(intf, catc);
 
 	SET_NETDEV_DEV(netdev, &intf->dev);
-- 
cgit v1.2.3


From b18fe4777f1cf7095fbe78652b72c076e300eaee Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:07:27 -0800
Subject: drivers/net/sunvnet.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sunvnet.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index bc74db0d12f3..d65764ea1d83 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -1062,10 +1062,7 @@ static struct vnet * __devinit vnet_new(const u64 *local_mac)
 		goto err_out_free_dev;
 	}
 
-	printk(KERN_INFO "%s: Sun LDOM vnet ", dev->name);
-
-	for (i = 0; i < 6; i++)
-		printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
+	printk(KERN_INFO "%s: Sun LDOM vnet %pM\n", dev->name, dev->dev_addr);
 
 	list_add(&vp->list, &vnet_list);
 
-- 
cgit v1.2.3


From fa876b474aa15cd1448790502a5a13f81f923446 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:08:09 -0800
Subject: drivers/net/smc911x.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smc911x.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 44ebbaa7457b..3c5a4f52345c 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -2017,10 +2017,8 @@ static int __devinit smc911x_probe(struct net_device *dev)
 					"set using ifconfig\n", dev->name);
 		} else {
 			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: ", dev->name);
-			for (i = 0; i < 5; i++)
-				printk("%2.2x:", dev->dev_addr[i]);
-			printk("%2.2x\n", dev->dev_addr[5]);
+			printk("%s: Ethernet addr: %pM\n",
+				dev->name, dev->dev_addr);
 		}
 
 		if (lp->phy_type == 0) {
-- 
cgit v1.2.3


From e583482091d207265953f501564056bd2c90b985 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:09:07 -0800
Subject: drivers/net/octeon/octeon_mgmt.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/octeon/octeon_mgmt.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c
index 050538bf155a..6fd8789ef487 100644
--- a/drivers/net/octeon/octeon_mgmt.c
+++ b/drivers/net/octeon/octeon_mgmt.c
@@ -1119,11 +1119,8 @@ static int __init octeon_mgmt_probe(struct platform_device *pdev)
 
 	if (p->port >= octeon_bootinfo->mac_addr_count)
 		dev_err(&pdev->dev,
-			"Error %s: Using MAC outside of the assigned range: "
-			"%02x:%02x:%02x:%02x:%02x:%02x\n", netdev->name,
-			netdev->dev_addr[0], netdev->dev_addr[1],
-			netdev->dev_addr[2], netdev->dev_addr[3],
-			netdev->dev_addr[4], netdev->dev_addr[5]);
+			"Error %s: Using MAC outside of the assigned range: %pM\n",
+			netdev->name, netdev->dev_addr);
 
 	if (register_netdev(netdev))
 		goto err;
-- 
cgit v1.2.3


From 30a6ae8d477dc90254eb785d8ccff6dfe7d9082e Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:10:01 -0800
Subject: drivers/net/r8169.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 60f96c468a24..c403ce0a3d3a 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3188,15 +3188,10 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (netif_msg_probe(tp)) {
 		u32 xid = RTL_R32(TxConfig) & 0x9cf0f8ff;
 
-		printk(KERN_INFO "%s: %s at 0x%lx, "
-		       "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
-		       "XID %08x IRQ %d\n",
+		printk(KERN_INFO "%s: %s at 0x%lx, %pM, XID %08x IRQ %d\n",
 		       dev->name,
 		       rtl_chip_info[tp->chipset].name,
-		       dev->base_addr,
-		       dev->dev_addr[0], dev->dev_addr[1],
-		       dev->dev_addr[2], dev->dev_addr[3],
-		       dev->dev_addr[4], dev->dev_addr[5], xid, dev->irq);
+		       dev->base_addr, dev->dev_addr, xid, dev->irq);
 	}
 
 	rtl8169_init_phy(dev, tp);
-- 
cgit v1.2.3


From 6cd9b49d7328c4656bfc17fcb47fb814955d40d2 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 29 Dec 2009 20:10:35 -0800
Subject: Subject: drivers/net/sh_eth.c: use %pM to shown MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sh_eth.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index ca6285016dfd..ed52c0063a65 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1473,13 +1473,9 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_unregister;
 
-	/* pritnt device infomation */
-	pr_info("Base address at 0x%x, ",
-	       (u32)ndev->base_addr);
-
-	for (i = 0; i < 5; i++)
-		printk("%02X:", ndev->dev_addr[i]);
-	printk("%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
+	/* print device infomation */
+	pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
+	       (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
 	platform_set_drvdata(pdev, ndev);
 
-- 
cgit v1.2.3


From 1f3c8804acba841b5573b953f5560d2683d2db0d Mon Sep 17 00:00:00 2001
From: Andy Gospodarek <andy@greyhouse.net>
Date: Mon, 14 Dec 2009 10:48:58 +0000
Subject: bonding: allow arp_ip_targets on separate vlans to use arp validation

This allows a bond device to specify an arp_ip_target as a host that is
not on the same vlan as the base bond device and still use arp
validation.  A configuration like this, now works:

BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3"

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000
    link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000
    link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
    link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::213:21ff:febe:33e9/64 scope link
       valid_lft forever preferred_lft forever
9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
    link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff
    inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100
    inet6 fe80::213:21ff:febe:33e9/64 scope link
       valid_lft forever preferred_lft forever

Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)

Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth1
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 1000
ARP IP target/s (n.n.n.n form): 10.0.100.1

Slave Interface: eth1
MII Status: up
Link Failure Count: 1
Permanent HW addr: 00:40:05:30:ff:30

Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:13:21:be:33:e9

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 11 +++++++++++
 net/8021q/vlan_core.c           |  2 ++
 net/core/dev.c                  | 20 +++++++++++++++++---
 3 files changed, 30 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3f0071cfe56b..6a42a1453afa 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2615,6 +2615,17 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
 
+	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+		/*
+		 * When using VLANS and bonding, dev and oriv_dev may be
+		 * incorrect if the physical interface supports VLAN
+		 * acceleration.  With this change ARP validation now
+		 * works for hosts only reachable on the VLAN interface.
+		 */
+		dev = vlan_dev_real_dev(dev);
+		orig_dev = dev_get_by_index_rcu(dev_net(skb->dev),skb->skb_iif);
+	}
+
 	if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
 		goto out;
 
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index e75a2f3b10af..c0316e0ca6e8 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -14,6 +14,7 @@ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 	if (skb_bond_should_drop(skb))
 		goto drop;
 
+	skb->skb_iif = skb->dev->ifindex;
 	__vlan_hwaccel_put_tag(skb, vlan_tci);
 	skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK);
 
@@ -85,6 +86,7 @@ vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
 	if (skb_bond_should_drop(skb))
 		goto drop;
 
+	skb->skb_iif = skb->dev->ifindex;
 	__vlan_hwaccel_put_tag(skb, vlan_tci);
 	skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK);
 
diff --git a/net/core/dev.c b/net/core/dev.c
index a8d68cdedbbe..f9aa699ab6cb 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2495,12 +2495,26 @@ ncls:
 	if (!skb)
 		goto out;
 
+	/*
+	 * Make sure frames received on VLAN interfaces stacked on
+	 * bonding interfaces still make their way to any base bonding
+	 * device that may have registered for a specific ptype.  The
+	 * handler may have to adjust skb->dev and orig_dev.
+	 *
+	 * null_or_orig can be overloaded since it will not be set when
+	 * using VLANs on top of bonding.  Putting it here prevents
+	 * disturbing the ptype_all handlers above.
+	 */
+	if ((skb->dev->priv_flags & IFF_802_1Q_VLAN) &&
+	    (vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING)) {
+		null_or_orig = vlan_dev_real_dev(skb->dev);
+	}
+
 	type = skb->protocol;
 	list_for_each_entry_rcu(ptype,
 			&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
-		if (ptype->type == type &&
-		    (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
-		     ptype->dev == orig_dev)) {
+		if (ptype->type == type && (ptype->dev == null_or_orig ||
+		     ptype->dev == skb->dev || ptype->dev == orig_dev)) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
-- 
cgit v1.2.3


From 75ed0a897208c3273fd8dc0f71e1417dba5a049b Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 18 Dec 2009 21:16:52 +0000
Subject: drivers/net/cxgb3: Use kzalloc for allocating only one thing

Use kzalloc rather than kcalloc(1,...)

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/cxgb3_offload.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index 75064eea1d87..9498361119d6 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1252,7 +1252,7 @@ int cxgb3_offload_activate(struct adapter *adapter)
 	struct mtutab mtutab;
 	unsigned int l2t_capacity;
 
-	t = kcalloc(1, sizeof(*t), GFP_KERNEL);
+	t = kzalloc(sizeof(*t), GFP_KERNEL);
 	if (!t)
 		return -ENOMEM;
 
-- 
cgit v1.2.3


From ceba0b29e002e6151b6b5ead8db9c664b58d8d21 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Mon, 28 Dec 2009 15:17:24 +0000
Subject: axnet_cs: remove unnecessary spin_unlock_irqrestore

axnet_cs:
    remove unnecessary spin_unlock_irqrestore,spin_lock_irqsave.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/axnet_cs.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d431b59e7d11..2ee57bd52a01 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1065,14 +1065,11 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb,
 	   
 	spin_lock_irqsave(&ei_local->page_lock, flags);
 	outb_p(0x00, e8390_base + EN0_IMR);
-	spin_unlock_irqrestore(&ei_local->page_lock, flags);
 	
 	/*
 	 *	Slow phase with lock held.
 	 */
 	 
-	spin_lock_irqsave(&ei_local->page_lock, flags);
-	
 	ei_local->irqlock = 1;
 
 	send_length = max(length, ETH_ZLEN);
-- 
cgit v1.2.3


From 51633632ef614ef045f25d76fc7f0133d7cc60c6 Mon Sep 17 00:00:00 2001
From: Juha Leppanen <juha_motorsportcom@luukku.com>
Date: Mon, 4 Jan 2010 15:52:50 -0500
Subject: wl1271: fix timeout in wl1271_top_reg_read

I noticed a timeout bug in

/drivers/net/wireless/wl12xx/wl1271_spi.c

In the current code you cannot tell why you exited
the "poll for data ready" do-while loop if exiting
was done after the last possible loop.

Then timeout==0 regardless of (val & OCP_READY_MASK) or
!(val & OCP_READY_MASK), leading to possible false timeout...

Simple correction could be decreasing timeout after checking
for !(val & OCP_READY_MASK), not before

(Manually converted from email to an actual patch by me. -- JWL)

Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com>
Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_spi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 02978a16e732..ee9564aa6ecc 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -397,8 +397,7 @@ u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
 	/* poll for data ready */
 	do {
 		val = wl1271_spi_read32(wl, OCP_DATA_READ);
-		timeout--;
-	} while (!(val & OCP_READY_MASK) && timeout);
+	} while (!(val & OCP_READY_MASK) && --timeout);
 
 	if (!timeout) {
 		wl1271_warning("Top register access timed out.");
-- 
cgit v1.2.3


From 61b91c1ea31d0d3ae5f848f7f7eab53dd691f8d0 Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Thu, 24 Dec 2009 15:31:10 +0800
Subject: iwlwifi: remove linux/utsrelease.h dependency

Commit 250cce26d5d03337aec4ff8405121f026adb4a89 uses UTS_RELEASE
as the the in-tree iwlwifi driver version. However the inclusion
of generated/utsrelease.h makes it a unpleasant behaviour to
recompile the driver everytime when utsrelease.h is updated. In
fact, the driver module is already built with the UTS_RELEASE
information via vermagic of modinfo. Mark the in-tree driver
with the version string "in-tree" to distinguish with those old
out-of-tree drivers.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 1728f961dcba..8deb83bfe182 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -63,8 +63,6 @@
 #ifndef __iwl_core_h__
 #define __iwl_core_h__
 
-#include <linux/utsrelease.h>
-
 /************************
  * forward declarations *
  ************************/
@@ -72,7 +70,7 @@ struct iwl_host_cmd;
 struct iwl_cmd;
 
 
-#define IWLWIFI_VERSION UTS_RELEASE "-k"
+#define IWLWIFI_VERSION "in-tree:"
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2009 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 
-- 
cgit v1.2.3


From 6976b665fc2b19900659b964bba3b55de08f264f Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sat, 2 Jan 2010 10:31:50 +0100
Subject: mwl8k: update version number to 0.11

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index c1c6ecd0c5b3..9545ff8d6422 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -26,7 +26,7 @@
 
 #define MWL8K_DESC	"Marvell TOPDOG(R) 802.11 Wireless Network Driver"
 #define MWL8K_NAME	KBUILD_MODNAME
-#define MWL8K_VERSION	"0.10"
+#define MWL8K_VERSION	"0.11"
 
 /* Register definitions */
 #define MWL8K_HIU_GEN_PTR			0x00000c10
-- 
cgit v1.2.3


From 91942230689c1758685499e82e53769d5e7f32eb Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:53:54 +0100
Subject: mwl8k: bail out if there is no AP firmware image support for this
 chip

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 9545ff8d6422..bfaa7911b336 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3361,10 +3361,17 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	mwl8k_release_firmware(priv);
 
 
-	if (priv->ap_fw)
+	if (priv->ap_fw) {
 		priv->rxd_ops = priv->device_info->ap_rxd_ops;
-	else
+		if (priv->rxd_ops == NULL) {
+			printk(KERN_ERR "%s: Driver does not have AP "
+			       "firmware image support for this hardware\n",
+			       wiphy_name(hw->wiphy));
+			goto err_stop_firmware;
+		}
+	} else {
 		priv->rxd_ops = &rxd_sta_ops;
+	}
 
 	priv->sniffer_enabled = false;
 	priv->wmm_enabled = false;
-- 
cgit v1.2.3


From 153458ff7ed5949cd5b07a2355a34aad9891ad98 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:54:08 +0100
Subject: mwl8k: prevent freeing free IRQ if ieee80211_register_hw() fails

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index bfaa7911b336..2c286d18bae3 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3501,7 +3501,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot register device\n",
 		       wiphy_name(hw->wiphy));
-		goto err_free_irq;
+		goto err_free_queues;
 	}
 
 	printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
-- 
cgit v1.2.3


From 9a2303b93039d0f3dd578cd75fe20ebaf075f1cb Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:54:25 +0100
Subject: mwl8k: make the tx ring drain status messages somewhat more friendly

Old:
> phy0: timeout waiting for tx rings to drain (9 -> 5 pkts), retrying
> phy0: timeout waiting for tx rings to drain (5 -> 2 pkts), retrying
> phy0: tx rings drained

New:
> phy0: waiting for tx rings to drain (9 -> 5 pkts)
> phy0: waiting for tx rings to drain (5 -> 2 pkts)
> phy0: tx rings drained

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 2c286d18bae3..46a5cf214a20 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1269,8 +1269,8 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 		}
 
 		if (priv->pending_tx_pkts < oldcount) {
-			printk(KERN_NOTICE "%s: timeout waiting for tx "
-			       "rings to drain (%d -> %d pkts), retrying\n",
+			printk(KERN_NOTICE "%s: waiting for tx rings "
+			       "to drain (%d -> %d pkts)\n",
 			       wiphy_name(hw->wiphy), oldcount,
 			       priv->pending_tx_pkts);
 			retry = 1;
-- 
cgit v1.2.3


From 25d81b1e1a0cca41a71a08468a7d3a4c751c8565 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:54:41 +0100
Subject: mwl8k: move struct peer_capability_info to its only user

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 91 +++++++++++++++++++++-----------------------
 1 file changed, 43 insertions(+), 48 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 46a5cf214a20..3dbdea904833 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -598,54 +598,6 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 }
 
 
-/*
- * Defines shared between transmission and reception.
- */
-/* HT control fields for firmware */
-struct ewc_ht_info {
-	__le16	control1;
-	__le16	control2;
-	__le16	control3;
-} __attribute__((packed));
-
-/* Firmware Station database operations */
-#define MWL8K_STA_DB_ADD_ENTRY		0
-#define MWL8K_STA_DB_MODIFY_ENTRY	1
-#define MWL8K_STA_DB_DEL_ENTRY		2
-#define MWL8K_STA_DB_FLUSH		3
-
-/* Peer Entry flags - used to define the type of the peer node */
-#define MWL8K_PEER_TYPE_ACCESSPOINT	2
-
-struct peer_capability_info {
-	/* Peer type - AP vs. STA.  */
-	__u8	peer_type;
-
-	/* Basic 802.11 capabilities from assoc resp.  */
-	__le16	basic_caps;
-
-	/* Set if peer supports 802.11n high throughput (HT).  */
-	__u8	ht_support;
-
-	/* Valid if HT is supported.  */
-	__le16	ht_caps;
-	__u8	extended_ht_caps;
-	struct ewc_ht_info	ewc_info;
-
-	/* Legacy rate table. Intersection of our rates and peer rates.  */
-	__u8	legacy_rates[12];
-
-	/* HT rate table. Intersection of our rates and peer rates.  */
-	__u8	ht_rates[16];
-	__u8	pad[16];
-
-	/* If set, interoperability mode, no proprietary extensions.  */
-	__u8	interop;
-	__u8	pad2;
-	__u8	station_id;
-	__le16	amsdu_enabled;
-} __attribute__((packed));
-
 /* DMA header used by firmware and hardware.  */
 struct mwl8k_dma_data {
 	__le16 fwlen;
@@ -2630,6 +2582,49 @@ static int mwl8k_cmd_set_rateadapt_mode(struct ieee80211_hw *hw, __u16 mode)
 /*
  * CMD_UPDATE_STADB.
  */
+#define MWL8K_STA_DB_ADD_ENTRY		0
+#define MWL8K_STA_DB_MODIFY_ENTRY	1
+#define MWL8K_STA_DB_DEL_ENTRY		2
+#define MWL8K_STA_DB_FLUSH		3
+
+/* Peer Entry flags - used to define the type of the peer node */
+#define MWL8K_PEER_TYPE_ACCESSPOINT	2
+
+struct ewc_ht_info {
+	__le16	control1;
+	__le16	control2;
+	__le16	control3;
+} __attribute__((packed));
+
+struct peer_capability_info {
+	/* Peer type - AP vs. STA.  */
+	__u8	peer_type;
+
+	/* Basic 802.11 capabilities from assoc resp.  */
+	__le16	basic_caps;
+
+	/* Set if peer supports 802.11n high throughput (HT).  */
+	__u8	ht_support;
+
+	/* Valid if HT is supported.  */
+	__le16	ht_caps;
+	__u8	extended_ht_caps;
+	struct ewc_ht_info	ewc_info;
+
+	/* Legacy rate table. Intersection of our rates and peer rates.  */
+	__u8	legacy_rates[12];
+
+	/* HT rate table. Intersection of our rates and peer rates.  */
+	__u8	ht_rates[16];
+	__u8	pad[16];
+
+	/* If set, interoperability mode, no proprietary extensions.  */
+	__u8	interop;
+	__u8	pad2;
+	__u8	station_id;
+	__le16	amsdu_enabled;
+} __attribute__((packed));
+
 struct mwl8k_cmd_update_stadb {
 	struct mwl8k_cmd_pkt header;
 
-- 
cgit v1.2.3


From bbfd9128d3b4a80bea017ebdd47b31a80dc7eadf Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:55:12 +0100
Subject: mwl8k: handle station database update for AP's sta entry via
 ->sta_notify()

Inserting and removing a hardware station database entry for the AP
when we are in managed mode is currently done in ->bss_info_changed().

To prepare for adding AP mode support, implement the ->sta_notify()
driver method, and let that handle inserting and removing the hardware
station database entry for our AP instead.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 82 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 73 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 3dbdea904833..df0596ca710d 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -185,6 +185,10 @@ struct mwl8k_priv {
 	bool sniffer_enabled;
 	bool wmm_enabled;
 
+	struct work_struct sta_notify_worker;
+	spinlock_t sta_notify_list_lock;
+	struct list_head sta_notify_list;
+
 	/* XXX need to convert this to handle multiple interfaces */
 	bool capture_beacon;
 	u8 capture_bssid[ETH_ALEN];
@@ -2641,7 +2645,7 @@ struct mwl8k_cmd_update_stadb {
 } __attribute__((packed));
 
 static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif, __u32 action)
+		struct ieee80211_vif *vif, __u32 action, u8 *addr)
 {
 	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	struct mwl8k_cmd_update_stadb *cmd;
@@ -2657,7 +2661,7 @@ static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
 
 	cmd->action = cpu_to_le32(action);
 	peer_info = &cmd->peer_info;
-	memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
+	memcpy(cmd->peer_addr, addr, ETH_ALEN);
 
 	switch (action) {
 	case MWL8K_STA_DB_ADD_ENTRY:
@@ -2978,12 +2982,6 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		if (rc)
 			goto out;
 
-		/* Update peer rate info */
-		rc = mwl8k_cmd_update_stadb(hw, vif,
-				MWL8K_STA_DB_MODIFY_ENTRY);
-		if (rc)
-			goto out;
-
 		/* Set AID */
 		rc = mwl8k_cmd_set_aid(hw, vif);
 		if (rc)
@@ -2996,7 +2994,6 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		memcpy(priv->capture_bssid, mwl8k_vif->bssid, ETH_ALEN);
 		priv->capture_beacon = true;
 	} else {
-		rc = mwl8k_cmd_update_stadb(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
 		memset(mwl8k_vif->bssid, 0, ETH_ALEN);
 	}
 
@@ -3142,6 +3139,67 @@ static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	return mwl8k_cmd_set_rts_threshold(hw, MWL8K_CMD_SET, value);
 }
 
+struct mwl8k_sta_notify_item
+{
+	struct list_head list;
+	struct ieee80211_vif *vif;
+	enum sta_notify_cmd cmd;
+	u8 addr[ETH_ALEN];
+};
+
+static void mwl8k_sta_notify_worker(struct work_struct *work)
+{
+	struct mwl8k_priv *priv =
+		container_of(work, struct mwl8k_priv, sta_notify_worker);
+
+	spin_lock_bh(&priv->sta_notify_list_lock);
+	while (!list_empty(&priv->sta_notify_list)) {
+		struct mwl8k_sta_notify_item *s;
+		int action;
+
+		s = list_entry(priv->sta_notify_list.next,
+			       struct mwl8k_sta_notify_item, list);
+		list_del(&s->list);
+
+		spin_unlock_bh(&priv->sta_notify_list_lock);
+
+		if (s->cmd == STA_NOTIFY_ADD)
+			action = MWL8K_STA_DB_MODIFY_ENTRY;
+		else
+			action = MWL8K_STA_DB_DEL_ENTRY;
+		mwl8k_cmd_update_stadb(priv->hw, s->vif, action, s->addr);
+
+		kfree(s);
+
+		spin_lock_bh(&priv->sta_notify_list_lock);
+	}
+	spin_unlock_bh(&priv->sta_notify_list_lock);
+}
+
+static void
+mwl8k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		 enum sta_notify_cmd cmd, struct ieee80211_sta *sta)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_sta_notify_item *s;
+
+	if (cmd != STA_NOTIFY_ADD && cmd != STA_NOTIFY_REMOVE)
+		return;
+
+	s = kmalloc(sizeof(*s), GFP_ATOMIC);
+	if (s != NULL) {
+		s->vif = vif;
+		s->cmd = cmd;
+		memcpy(s->addr, sta->addr, ETH_ALEN);
+
+		spin_lock(&priv->sta_notify_list_lock);
+		list_add_tail(&s->list, &priv->sta_notify_list);
+		spin_unlock(&priv->sta_notify_list_lock);
+
+		ieee80211_queue_work(hw, &priv->sta_notify_worker);
+	}
+}
+
 static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 			 const struct ieee80211_tx_queue_params *params)
 {
@@ -3201,6 +3259,7 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.prepare_multicast	= mwl8k_prepare_multicast,
 	.configure_filter	= mwl8k_configure_filter,
 	.set_rts_threshold	= mwl8k_set_rts_threshold,
+	.sta_notify		= mwl8k_sta_notify,
 	.conf_tx		= mwl8k_conf_tx,
 	.get_tx_stats		= mwl8k_get_tx_stats,
 	.get_stats		= mwl8k_get_stats,
@@ -3404,6 +3463,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	priv->radio_on = 0;
 	priv->radio_short_preamble = 0;
 
+	/* Station database handling */
+	INIT_WORK(&priv->sta_notify_worker, mwl8k_sta_notify_worker);
+	spin_lock_init(&priv->sta_notify_list_lock);
+	INIT_LIST_HEAD(&priv->sta_notify_list);
+
 	/* Finalize join worker */
 	INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
 
-- 
cgit v1.2.3


From 0a11dfc36604d9b24deda17461b7ea69851846aa Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:55:21 +0100
Subject: mwl8k: remove mwl8k_vif::bssid, which is now useless

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index df0596ca710d..ed666b7e7e41 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -211,9 +211,6 @@ struct mwl8k_vif {
 	/* Local MAC address.  */
 	u8 mac_addr[ETH_ALEN];
 
-	/* BSSID of AP.  */
-	u8 bssid[ETH_ALEN];
-
 	/* Index into station database. Returned by UPDATE_STADB.  */
 	u8	peer_id;
 
@@ -2001,7 +1998,7 @@ struct mwl8k_cmd_set_post_scan {
 } __attribute__((packed));
 
 static int
-mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, __u8 *mac)
+mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, const __u8 *mac)
 {
 	struct mwl8k_cmd_set_post_scan *cmd;
 	int rc;
@@ -2077,7 +2074,6 @@ struct mwl8k_cmd_update_set_aid {
 static int
 mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	struct mwl8k_cmd_update_set_aid *cmd;
 	u16 prot_mode;
 	int rc;
@@ -2090,7 +2086,7 @@ mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->aid = cpu_to_le16(vif->bss_conf.aid);
 
-	memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
+	memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN);
 
 	if (vif->bss_conf.use_cts_prot) {
 		prot_mode = MWL8K_FRAME_PROT_11G;
@@ -2945,7 +2941,6 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 				   u32 changed)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif);
 	int rc;
 
 	if ((changed & BSS_CHANGED_ASSOC) == 0)
@@ -2958,8 +2953,6 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		return;
 
 	if (vif->bss_conf.assoc) {
-		memcpy(mwl8k_vif->bssid, vif->bss_conf.bssid, ETH_ALEN);
-
 		/* Install rates */
 		rc = mwl8k_cmd_set_rate(hw, vif);
 		if (rc)
@@ -2991,10 +2984,8 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		 * Finalize the join.  Tell rx handler to process
 		 * next beacon from our BSSID.
 		 */
-		memcpy(priv->capture_bssid, mwl8k_vif->bssid, ETH_ALEN);
+		memcpy(priv->capture_bssid, vif->bss_conf.bssid, ETH_ALEN);
 		priv->capture_beacon = true;
-	} else {
-		memset(mwl8k_vif->bssid, 0, ETH_ALEN);
 	}
 
 out:
@@ -3097,7 +3088,7 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 			 */
 			mwl8k_cmd_set_pre_scan(hw);
 		} else {
-			u8 *bssid;
+			const u8 *bssid;
 
 			/*
 			 * Enable the BSS filter.
@@ -3109,7 +3100,7 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 			 */
 			bssid = "\x01\x00\x00\x00\x00\x00";
 			if (priv->vif != NULL)
-				bssid = MWL8K_VIF(priv->vif)->bssid;
+				bssid = priv->vif->bss_conf.bssid;
 
 			mwl8k_cmd_set_post_scan(hw, bssid);
 		}
-- 
cgit v1.2.3


From a680400e8ac32adda81b5e2d7f23dfac63e064fe Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:55:42 +0100
Subject: mwl8k: move ->peer_id from mwl8k_vif to mwl8k_sta

For STA firmware, move the per-peer hardware station ID to the
driver-private part of struct ieee80211_sta, where it belongs.

(Since issuing a hardware station database maintenance command sleeps,
we can't hold a reference to the ieee80211_sta * across the command,
and since we won't know the station ID until after the command
completes, we need to re-lookup the sta when the command is done to
write the returned station ID back to its driver-private part.)

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 119 ++++++++++++++++++++++++-------------------
 1 file changed, 67 insertions(+), 52 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index ed666b7e7e41..5b5cf9357dbf 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -211,15 +211,17 @@ struct mwl8k_vif {
 	/* Local MAC address.  */
 	u8 mac_addr[ETH_ALEN];
 
-	/* Index into station database. Returned by UPDATE_STADB.  */
-	u8	peer_id;
-
 	/* Non AMPDU sequence number assigned by driver */
-	u16	seqno;
+	u16 seqno;
 };
-
 #define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
 
+struct mwl8k_sta {
+	/* Index into station database. Returned by UPDATE_STADB.  */
+	u8 peer_id;
+};
+#define MWL8K_STA(_sta) ((struct mwl8k_sta *)&((_sta)->drv_priv))
+
 static const struct ieee80211_channel mwl8k_channels[] = {
 	{ .center_freq = 2412, .hw_value = 1, },
 	{ .center_freq = 2417, .hw_value = 2, },
@@ -1402,7 +1404,10 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 	tx->pkt_phys_addr = cpu_to_le32(dma);
 	tx->pkt_len = cpu_to_le16(skb->len);
 	tx->rate_info = 0;
-	tx->peer_id = mwl8k_vif->peer_id;
+	if (!priv->ap_fw && tx_info->control.sta != NULL)
+		tx->peer_id = MWL8K_STA(tx_info->control.sta)->peer_id;
+	else
+		tx->peer_id = 0;
 	wmb();
 	tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
 
@@ -2582,14 +2587,6 @@ static int mwl8k_cmd_set_rateadapt_mode(struct ieee80211_hw *hw, __u16 mode)
 /*
  * CMD_UPDATE_STADB.
  */
-#define MWL8K_STA_DB_ADD_ENTRY		0
-#define MWL8K_STA_DB_MODIFY_ENTRY	1
-#define MWL8K_STA_DB_DEL_ENTRY		2
-#define MWL8K_STA_DB_FLUSH		3
-
-/* Peer Entry flags - used to define the type of the peer node */
-#define MWL8K_PEER_TYPE_ACCESSPOINT	2
-
 struct ewc_ht_info {
 	__le16	control1;
 	__le16	control2;
@@ -2640,12 +2637,17 @@ struct mwl8k_cmd_update_stadb {
 	struct peer_capability_info	peer_info;
 } __attribute__((packed));
 
-static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif, __u32 action, u8 *addr)
+#define MWL8K_STA_DB_MODIFY_ENTRY	1
+#define MWL8K_STA_DB_DEL_ENTRY		2
+
+/* Peer Entry flags - used to define the type of the peer node */
+#define MWL8K_PEER_TYPE_ACCESSPOINT	2
+
+static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif, u8 *addr)
 {
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	struct mwl8k_cmd_update_stadb *cmd;
-	struct peer_capability_info *peer_info;
+	struct peer_capability_info *p;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2654,37 +2656,38 @@ static int mwl8k_cmd_update_stadb(struct ieee80211_hw *hw,
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le32(MWL8K_STA_DB_MODIFY_ENTRY);
+	memcpy(cmd->peer_addr, addr, ETH_ALEN);
 
-	cmd->action = cpu_to_le32(action);
-	peer_info = &cmd->peer_info;
+	p = &cmd->peer_info;
+	p->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
+	p->basic_caps = cpu_to_le16(vif->bss_conf.assoc_capability);
+	memcpy(p->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+	p->interop = 1;
+	p->amsdu_enabled = 0;
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc ? rc : p->station_id;
+}
+
+static int mwl8k_cmd_update_stadb_del(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif, u8 *addr)
+{
+	struct mwl8k_cmd_update_stadb *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le32(MWL8K_STA_DB_DEL_ENTRY);
 	memcpy(cmd->peer_addr, addr, ETH_ALEN);
 
-	switch (action) {
-	case MWL8K_STA_DB_ADD_ENTRY:
-	case MWL8K_STA_DB_MODIFY_ENTRY:
-		/* Build peer_info block */
-		peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
-		peer_info->basic_caps =
-			cpu_to_le16(vif->bss_conf.assoc_capability);
-		memcpy(peer_info->legacy_rates, mwl8k_rateids,
-		       sizeof(mwl8k_rateids));
-		peer_info->interop = 1;
-		peer_info->amsdu_enabled = 0;
-
-		rc = mwl8k_post_cmd(hw, &cmd->header);
-		if (rc == 0)
-			mv_vif->peer_id = peer_info->station_id;
-
-		break;
-
-	case MWL8K_STA_DB_DEL_ENTRY:
-	case MWL8K_STA_DB_FLUSH:
-	default:
-		rc = mwl8k_post_cmd(hw, &cmd->header);
-		if (rc == 0)
-			mv_vif->peer_id = 0;
-		break;
-	}
+	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -3142,11 +3145,11 @@ static void mwl8k_sta_notify_worker(struct work_struct *work)
 {
 	struct mwl8k_priv *priv =
 		container_of(work, struct mwl8k_priv, sta_notify_worker);
+	struct ieee80211_hw *hw = priv->hw;
 
 	spin_lock_bh(&priv->sta_notify_list_lock);
 	while (!list_empty(&priv->sta_notify_list)) {
 		struct mwl8k_sta_notify_item *s;
-		int action;
 
 		s = list_entry(priv->sta_notify_list.next,
 			       struct mwl8k_sta_notify_item, list);
@@ -3154,11 +3157,22 @@ static void mwl8k_sta_notify_worker(struct work_struct *work)
 
 		spin_unlock_bh(&priv->sta_notify_list_lock);
 
-		if (s->cmd == STA_NOTIFY_ADD)
-			action = MWL8K_STA_DB_MODIFY_ENTRY;
-		else
-			action = MWL8K_STA_DB_DEL_ENTRY;
-		mwl8k_cmd_update_stadb(priv->hw, s->vif, action, s->addr);
+		if (s->cmd == STA_NOTIFY_ADD) {
+			int rc;
+
+			rc = mwl8k_cmd_update_stadb_add(hw, s->vif, s->addr);
+			if (rc >= 0) {
+				struct ieee80211_sta *sta;
+
+				rcu_read_lock();
+				sta = ieee80211_find_sta(s->vif, s->addr);
+				if (sta != NULL)
+					MWL8K_STA(sta)->peer_id = rc;
+				rcu_read_unlock();
+			}
+		} else {
+			mwl8k_cmd_update_stadb_del(hw, s->vif, s->addr);
+		}
 
 		kfree(s);
 
@@ -3448,6 +3462,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	/* Set rssi and noise values to dBm */
 	hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
 	hw->vif_data_size = sizeof(struct mwl8k_vif);
+	hw->sta_data_size = sizeof(struct mwl8k_sta);
 	priv->vif = NULL;
 
 	/* Set default radio state and preamble */
-- 
cgit v1.2.3


From c6e9601071173fed2a77f9c435c41f3b33d1018f Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:55:52 +0100
Subject: mwl8k: honor peer rate set

When calling SET_RATE, SET_AID, or when creating a station database
entry for our AP, pass in the AP's rate set instead of just blindly
enabling all legacy rates, so as to end up doing the right thing when
talking to 11b-only APs.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 57 +++++++++++++++++++++++++++++++++-----------
 1 file changed, 43 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 5b5cf9357dbf..d8eff68978f1 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -256,10 +256,6 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 	{ .bitrate = 720, .hw_value = 144, },
 };
 
-static const u8 mwl8k_rateids[12] = {
-	2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108,
-};
-
 /* Set or get info from Firmware */
 #define MWL8K_CMD_SET			0x0001
 #define MWL8K_CMD_GET			0x0000
@@ -2076,8 +2072,25 @@ struct mwl8k_cmd_update_set_aid {
 	__u8	supp_rates[14];
 } __attribute__((packed));
 
+static void legacy_rate_mask_to_array(u8 *rates, u32 mask)
+{
+	int i;
+	int j;
+
+	/*
+	 * Clear nonstandard rates 4 and 13.
+	 */
+	mask &= 0x1fef;
+
+	for (i = 0, j = 0; i < 14; i++) {
+		if (mask & (1 << i))
+			rates[j++] = mwl8k_rates[i].hw_value;
+	}
+}
+
 static int
-mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
+		  struct ieee80211_vif *vif, u32 legacy_rate_mask)
 {
 	struct mwl8k_cmd_update_set_aid *cmd;
 	u16 prot_mode;
@@ -2090,7 +2103,6 @@ mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_AID);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->aid = cpu_to_le16(vif->bss_conf.aid);
-
 	memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN);
 
 	if (vif->bss_conf.use_cts_prot) {
@@ -2111,7 +2123,7 @@ mwl8k_cmd_set_aid(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	}
 	cmd->protection_mode = cpu_to_le16(prot_mode);
 
-	memcpy(cmd->supp_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+	legacy_rate_mask_to_array(cmd->supp_rates, legacy_rate_mask);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2132,7 +2144,8 @@ struct mwl8k_cmd_set_rate {
 } __attribute__((packed));
 
 static int
-mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		   u32 legacy_rate_mask)
 {
 	struct mwl8k_cmd_set_rate *cmd;
 	int rc;
@@ -2143,7 +2156,7 @@ mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	memcpy(cmd->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+	legacy_rate_mask_to_array(cmd->legacy_rates, legacy_rate_mask);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2644,7 +2657,8 @@ struct mwl8k_cmd_update_stadb {
 #define MWL8K_PEER_TYPE_ACCESSPOINT	2
 
 static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif, u8 *addr)
+				      struct ieee80211_vif *vif,
+				      u8 *addr, u32 legacy_rate_mask)
 {
 	struct mwl8k_cmd_update_stadb *cmd;
 	struct peer_capability_info *p;
@@ -2662,7 +2676,7 @@ static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
 	p = &cmd->peer_info;
 	p->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
 	p->basic_caps = cpu_to_le16(vif->bss_conf.assoc_capability);
-	memcpy(p->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
+	legacy_rate_mask_to_array(p->legacy_rates, legacy_rate_mask);
 	p->interop = 1;
 	p->amsdu_enabled = 0;
 
@@ -2956,8 +2970,20 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		return;
 
 	if (vif->bss_conf.assoc) {
+		struct ieee80211_sta *ap;
+		u32 legacy_rate_mask;
+
+		rcu_read_lock();
+		ap = ieee80211_find_sta(vif, vif->bss_conf.bssid);
+		if (ap != NULL)
+			legacy_rate_mask = ap->supp_rates[IEEE80211_BAND_2GHZ];
+		rcu_read_unlock();
+
+		if (ap == NULL)
+			goto out;
+
 		/* Install rates */
-		rc = mwl8k_cmd_set_rate(hw, vif);
+		rc = mwl8k_cmd_set_rate(hw, vif, legacy_rate_mask);
 		if (rc)
 			goto out;
 
@@ -2979,7 +3005,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 			goto out;
 
 		/* Set AID */
-		rc = mwl8k_cmd_set_aid(hw, vif);
+		rc = mwl8k_cmd_set_aid(hw, vif, legacy_rate_mask);
 		if (rc)
 			goto out;
 
@@ -3139,6 +3165,7 @@ struct mwl8k_sta_notify_item
 	struct ieee80211_vif *vif;
 	enum sta_notify_cmd cmd;
 	u8 addr[ETH_ALEN];
+	u32 legacy_rate_mask;
 };
 
 static void mwl8k_sta_notify_worker(struct work_struct *work)
@@ -3160,7 +3187,8 @@ static void mwl8k_sta_notify_worker(struct work_struct *work)
 		if (s->cmd == STA_NOTIFY_ADD) {
 			int rc;
 
-			rc = mwl8k_cmd_update_stadb_add(hw, s->vif, s->addr);
+			rc = mwl8k_cmd_update_stadb_add(hw, s->vif,
+						s->addr, s->legacy_rate_mask);
 			if (rc >= 0) {
 				struct ieee80211_sta *sta;
 
@@ -3196,6 +3224,7 @@ mwl8k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		s->vif = vif;
 		s->cmd = cmd;
 		memcpy(s->addr, sta->addr, ETH_ALEN);
+		s->legacy_rate_mask = sta->supp_rates[IEEE80211_BAND_2GHZ];
 
 		spin_lock(&priv->sta_notify_list_lock);
 		list_add_tail(&s->list, &priv->sta_notify_list);
-- 
cgit v1.2.3


From c3cbbe8a5cd2886e13e9c93e059d9761f3715665 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:56:07 +0100
Subject: mwl8k: fix changed flags handling in mwl8k_bss_info_changed()

Previously, mwl8k_bss_info_changed() would refuse to do anything if
the 'changed' argument indicated that the association status hadn't
changed.  Fix this up so that it will allow changing things like the
preamble type, the slot time and the CTS-to-self protection method
without having to reassociate.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 52 ++++++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index d8eff68978f1..fa7b4fe074f5 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2958,57 +2958,71 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 				   u32 changed)
 {
 	struct mwl8k_priv *priv = hw->priv;
+	u32 ap_legacy_rates;
 	int rc;
 
-	if ((changed & BSS_CHANGED_ASSOC) == 0)
+	if (mwl8k_fw_lock(hw))
 		return;
 
-	priv->capture_beacon = false;
-
-	rc = mwl8k_fw_lock(hw);
-	if (rc)
-		return;
+	/*
+	 * No need to capture a beacon if we're no longer associated.
+	 */
+	if ((changed & BSS_CHANGED_ASSOC) && !vif->bss_conf.assoc)
+		priv->capture_beacon = false;
 
+	/*
+	 * Get the AP's legacy rates.
+	 */
+	ap_legacy_rates = 0;
 	if (vif->bss_conf.assoc) {
 		struct ieee80211_sta *ap;
-		u32 legacy_rate_mask;
 
 		rcu_read_lock();
-		ap = ieee80211_find_sta(vif, vif->bss_conf.bssid);
-		if (ap != NULL)
-			legacy_rate_mask = ap->supp_rates[IEEE80211_BAND_2GHZ];
-		rcu_read_unlock();
 
-		if (ap == NULL)
+		ap = ieee80211_find_sta(vif, vif->bss_conf.bssid);
+		if (ap == NULL) {
+			rcu_read_unlock();
 			goto out;
+		}
 
-		/* Install rates */
-		rc = mwl8k_cmd_set_rate(hw, vif, legacy_rate_mask);
+		ap_legacy_rates = ap->supp_rates[IEEE80211_BAND_2GHZ];
+
+		rcu_read_unlock();
+	}
+
+	if ((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc) {
+		rc = mwl8k_cmd_set_rate(hw, vif, ap_legacy_rates);
 		if (rc)
 			goto out;
 
-		/* Turn on rate adaptation */
 		rc = mwl8k_cmd_use_fixed_rate(hw, MWL8K_USE_AUTO_RATE,
 			MWL8K_UCAST_RATE, NULL);
 		if (rc)
 			goto out;
+	}
 
-		/* Set radio preamble */
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
 		rc = mwl8k_set_radio_preamble(hw,
 				vif->bss_conf.use_short_preamble);
 		if (rc)
 			goto out;
+	}
 
-		/* Set slot time */
+	if (changed & BSS_CHANGED_ERP_SLOT) {
 		rc = mwl8k_cmd_set_slot(hw, vif->bss_conf.use_short_slot);
 		if (rc)
 			goto out;
+	}
 
-		/* Set AID */
-		rc = mwl8k_cmd_set_aid(hw, vif, legacy_rate_mask);
+	if (((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc) ||
+	    (changed & (BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_HT))) {
+		rc = mwl8k_cmd_set_aid(hw, vif, ap_legacy_rates);
 		if (rc)
 			goto out;
+	}
 
+	if (vif->bss_conf.assoc &&
+	    (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_BEACON_INT))) {
 		/*
 		 * Finalize the join.  Tell rx handler to process
 		 * next beacon from our BSSID.
-- 
cgit v1.2.3


From 9e1b17ead81e72d3db37b4cf15cde1f613603822 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:56:19 +0100
Subject: mwl8k: add support for 88w8363 in STA mode

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index fa7b4fe074f5..de74c111d967 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3344,11 +3344,17 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 }
 
 enum {
-	MWL8687 = 0,
+	MWL8363 = 0,
+	MWL8687,
 	MWL8366,
 };
 
 static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
+	[MWL8363] = {
+		.part_name	= "88w8363",
+		.helper_image	= "mwl8k/helper_8363.fw",
+		.fw_image	= "mwl8k/fmimage_8363.fw",
+	},
 	[MWL8687] = {
 		.part_name	= "88w8687",
 		.helper_image	= "mwl8k/helper_8687.fw",
@@ -3363,6 +3369,8 @@ static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
+	{ PCI_VDEVICE(MARVELL, 0x2a0c), .driver_data = MWL8363, },
+	{ PCI_VDEVICE(MARVELL, 0x2a24), .driver_data = MWL8363, },
 	{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, },
 	{ PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, },
 	{ PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, },
-- 
cgit v1.2.3


From 610677d2f0415570a7590790e8be376a946cd08b Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:56:46 +0100
Subject: mwl8k: allow setting HT channels

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index de74c111d967..2ae6c363f374 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2030,8 +2030,9 @@ struct mwl8k_cmd_set_rf_channel {
 } __attribute__((packed));
 
 static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw,
-				    struct ieee80211_channel *channel)
+				    struct ieee80211_conf *conf)
 {
+	struct ieee80211_channel *channel = conf->channel;
 	struct mwl8k_cmd_set_rf_channel *cmd;
 	int rc;
 
@@ -2043,10 +2044,17 @@ static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw,
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->action = cpu_to_le16(MWL8K_CMD_SET);
 	cmd->current_channel = channel->hw_value;
+
 	if (channel->band == IEEE80211_BAND_2GHZ)
-		cmd->channel_flags = cpu_to_le32(0x00000081);
-	else
-		cmd->channel_flags = cpu_to_le32(0x00000000);
+		cmd->channel_flags |= cpu_to_le32(0x00000001);
+
+	if (conf->channel_type == NL80211_CHAN_NO_HT ||
+	    conf->channel_type == NL80211_CHAN_HT20)
+		cmd->channel_flags |= cpu_to_le32(0x00000080);
+	else if (conf->channel_type == NL80211_CHAN_HT40MINUS)
+		cmd->channel_flags |= cpu_to_le32(0x000001900);
+	else if (conf->channel_type == NL80211_CHAN_HT40PLUS)
+		cmd->channel_flags |= cpu_to_le32(0x000000900);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2926,7 +2934,7 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	if (rc)
 		goto out;
 
-	rc = mwl8k_cmd_set_rf_channel(hw, conf->channel);
+	rc = mwl8k_cmd_set_rf_channel(hw, conf);
 	if (rc)
 		goto out;
 
-- 
cgit v1.2.3


From 13935e2cf39b124c9a2ff0349b294e0b1e2e3aef Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:57:59 +0100
Subject: mwl8k: pass in HT capabilities and rates when associating

Pass the AP's MCS rate mask to SET_RATE when associating, and make
UPDATE_STADB pass in the peer's HT caps and rates when adding a new
hardware station database entry.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 2ae6c363f374..e0301b6310f9 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2153,7 +2153,7 @@ struct mwl8k_cmd_set_rate {
 
 static int
 mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-		   u32 legacy_rate_mask)
+		   u32 legacy_rate_mask, u8 *mcs_rates)
 {
 	struct mwl8k_cmd_set_rate *cmd;
 	int rc;
@@ -2165,6 +2165,7 @@ mwl8k_cmd_set_rate(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	legacy_rate_mask_to_array(cmd->legacy_rates, legacy_rate_mask);
+	memcpy(cmd->mcs_set, mcs_rates, 16);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2666,7 +2667,7 @@ struct mwl8k_cmd_update_stadb {
 
 static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
 				      struct ieee80211_vif *vif,
-				      u8 *addr, u32 legacy_rate_mask)
+				      struct ieee80211_sta *sta)
 {
 	struct mwl8k_cmd_update_stadb *cmd;
 	struct peer_capability_info *p;
@@ -2679,12 +2680,18 @@ static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_UPDATE_STADB);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->action = cpu_to_le32(MWL8K_STA_DB_MODIFY_ENTRY);
-	memcpy(cmd->peer_addr, addr, ETH_ALEN);
+	memcpy(cmd->peer_addr, sta->addr, ETH_ALEN);
 
 	p = &cmd->peer_info;
 	p->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
 	p->basic_caps = cpu_to_le16(vif->bss_conf.assoc_capability);
-	legacy_rate_mask_to_array(p->legacy_rates, legacy_rate_mask);
+	p->ht_support = sta->ht_cap.ht_supported;
+	p->ht_caps = sta->ht_cap.cap;
+	p->extended_ht_caps = (sta->ht_cap.ampdu_factor & 3) |
+		((sta->ht_cap.ampdu_density & 7) << 2);
+	legacy_rate_mask_to_array(p->legacy_rates,
+				  sta->supp_rates[IEEE80211_BAND_2GHZ]);
+	memcpy(p->ht_rates, sta->ht_cap.mcs.rx_mask, 16);
 	p->interop = 1;
 	p->amsdu_enabled = 0;
 
@@ -2967,6 +2974,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct mwl8k_priv *priv = hw->priv;
 	u32 ap_legacy_rates;
+	u8 ap_mcs_rates[16];
 	int rc;
 
 	if (mwl8k_fw_lock(hw))
@@ -2979,12 +2987,11 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		priv->capture_beacon = false;
 
 	/*
-	 * Get the AP's legacy rates.
+	 * Get the AP's legacy and MCS rates.
 	 */
 	ap_legacy_rates = 0;
 	if (vif->bss_conf.assoc) {
 		struct ieee80211_sta *ap;
-
 		rcu_read_lock();
 
 		ap = ieee80211_find_sta(vif, vif->bss_conf.bssid);
@@ -2994,12 +3001,13 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		}
 
 		ap_legacy_rates = ap->supp_rates[IEEE80211_BAND_2GHZ];
+		memcpy(ap_mcs_rates, ap->ht_cap.mcs.rx_mask, 16);
 
 		rcu_read_unlock();
 	}
 
 	if ((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc) {
-		rc = mwl8k_cmd_set_rate(hw, vif, ap_legacy_rates);
+		rc = mwl8k_cmd_set_rate(hw, vif, ap_legacy_rates, ap_mcs_rates);
 		if (rc)
 			goto out;
 
@@ -3186,8 +3194,7 @@ struct mwl8k_sta_notify_item
 	struct list_head list;
 	struct ieee80211_vif *vif;
 	enum sta_notify_cmd cmd;
-	u8 addr[ETH_ALEN];
-	u32 legacy_rate_mask;
+	struct ieee80211_sta sta;
 };
 
 static void mwl8k_sta_notify_worker(struct work_struct *work)
@@ -3209,19 +3216,18 @@ static void mwl8k_sta_notify_worker(struct work_struct *work)
 		if (s->cmd == STA_NOTIFY_ADD) {
 			int rc;
 
-			rc = mwl8k_cmd_update_stadb_add(hw, s->vif,
-						s->addr, s->legacy_rate_mask);
+			rc = mwl8k_cmd_update_stadb_add(hw, s->vif, &s->sta);
 			if (rc >= 0) {
 				struct ieee80211_sta *sta;
 
 				rcu_read_lock();
-				sta = ieee80211_find_sta(s->vif, s->addr);
+				sta = ieee80211_find_sta(s->vif, s->sta.addr);
 				if (sta != NULL)
 					MWL8K_STA(sta)->peer_id = rc;
 				rcu_read_unlock();
 			}
 		} else {
-			mwl8k_cmd_update_stadb_del(hw, s->vif, s->addr);
+			mwl8k_cmd_update_stadb_del(hw, s->vif, s->sta.addr);
 		}
 
 		kfree(s);
@@ -3245,8 +3251,7 @@ mwl8k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	if (s != NULL) {
 		s->vif = vif;
 		s->cmd = cmd;
-		memcpy(s->addr, sta->addr, ETH_ALEN);
-		s->legacy_rate_mask = sta->supp_rates[IEEE80211_BAND_2GHZ];
+		s->sta = *sta;
 
 		spin_lock(&priv->sta_notify_list_lock);
 		list_add_tail(&s->list, &priv->sta_notify_list);
-- 
cgit v1.2.3


From a2292d83b5dcb7f378956a124854d2b17fa53aa3 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:58:12 +0100
Subject: mwl8k: trivial rx-only ampdu implementation

AMPDU receive doesn't need any special handling, so let's enable
this before tackling the transmit side.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index e0301b6310f9..57ced0db910a 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3309,6 +3309,22 @@ static int mwl8k_get_stats(struct ieee80211_hw *hw,
 	return mwl8k_cmd_get_stat(hw, stats);
 }
 
+static int
+mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		   enum ieee80211_ampdu_mlme_action action,
+		   struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+{
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+	case IEEE80211_AMPDU_RX_STOP:
+		if (!(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
+			return -ENOTSUPP;
+		return 0;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
 static const struct ieee80211_ops mwl8k_ops = {
 	.tx			= mwl8k_tx,
 	.start			= mwl8k_start,
@@ -3324,6 +3340,7 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.conf_tx		= mwl8k_conf_tx,
 	.get_tx_stats		= mwl8k_get_tx_stats,
 	.get_stats		= mwl8k_get_stats,
+	.ampdu_action		= mwl8k_ampdu_action,
 };
 
 static void mwl8k_tx_reclaim_handler(unsigned long data)
-- 
cgit v1.2.3


From 341c97918ab7e84a155ea8b18759425304d213b6 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 4 Jan 2010 21:58:40 +0100
Subject: mwl8k: pass GET_HW_SPEC capability bitmask up the stack

This enables HT association and AMPDU in the receive direction for
STA firmware images on hardware that supports it.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 64 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 57ced0db910a..23a5a3442623 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1578,6 +1578,68 @@ struct mwl8k_cmd_get_hw_spec_sta {
 	__le32 total_rxd;
 } __attribute__((packed));
 
+#define MWL8K_CAP_MAX_AMSDU		0x20000000
+#define MWL8K_CAP_GREENFIELD		0x08000000
+#define MWL8K_CAP_AMPDU			0x04000000
+#define MWL8K_CAP_RX_STBC		0x01000000
+#define MWL8K_CAP_TX_STBC		0x00800000
+#define MWL8K_CAP_SHORTGI_40MHZ		0x00400000
+#define MWL8K_CAP_SHORTGI_20MHZ		0x00200000
+#define MWL8K_CAP_RX_ANTENNA_MASK	0x000e0000
+#define MWL8K_CAP_TX_ANTENNA_MASK	0x0001c000
+#define MWL8K_CAP_DELAY_BA		0x00003000
+#define MWL8K_CAP_MIMO			0x00000200
+#define MWL8K_CAP_40MHZ			0x00000100
+
+static void mwl8k_set_ht_caps(struct ieee80211_hw *hw, u32 cap)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	int rx_streams;
+	int tx_streams;
+
+	priv->band.ht_cap.ht_supported = 1;
+
+	if (cap & MWL8K_CAP_MAX_AMSDU)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+	if (cap & MWL8K_CAP_GREENFIELD)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_GRN_FLD;
+	if (cap & MWL8K_CAP_AMPDU) {
+		hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+		priv->band.ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+		priv->band.ht_cap.ampdu_density =
+				IEEE80211_HT_MPDU_DENSITY_NONE;
+	}
+	if (cap & MWL8K_CAP_RX_STBC)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_RX_STBC;
+	if (cap & MWL8K_CAP_TX_STBC)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+	if (cap & MWL8K_CAP_SHORTGI_40MHZ)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+	if (cap & MWL8K_CAP_SHORTGI_20MHZ)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+	if (cap & MWL8K_CAP_DELAY_BA)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_DELAY_BA;
+	if (cap & MWL8K_CAP_40MHZ)
+		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+	rx_streams = hweight32(cap & MWL8K_CAP_RX_ANTENNA_MASK);
+	tx_streams = hweight32(cap & MWL8K_CAP_TX_ANTENNA_MASK);
+
+	priv->band.ht_cap.mcs.rx_mask[0] = 0xff;
+	if (rx_streams >= 2)
+		priv->band.ht_cap.mcs.rx_mask[1] = 0xff;
+	if (rx_streams >= 3)
+		priv->band.ht_cap.mcs.rx_mask[2] = 0xff;
+	priv->band.ht_cap.mcs.rx_mask[4] = 0x01;
+	priv->band.ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+
+	if (rx_streams != tx_streams) {
+		priv->band.ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+		priv->band.ht_cap.mcs.tx_params |= (tx_streams - 1) <<
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+	}
+}
+
 static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
@@ -1608,6 +1670,8 @@ static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
+		if (cmd->caps & cpu_to_le32(MWL8K_CAP_MIMO))
+			mwl8k_set_ht_caps(hw, le32_to_cpu(cmd->caps));
 	}
 
 	kfree(cmd);
-- 
cgit v1.2.3


From c32bbff81c04096c7888aed3946ee90fdbfbc3a3 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Thu, 31 Dec 2009 00:49:43 +0000
Subject: sky2: Refactor sky2_get_regs into two functions

Separate code deciding which registers can be accessed out of
sky2_get_regs in preparation for adding more conditions into it.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 94 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 48 insertions(+), 46 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1c01b96c9611..faa48410195e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3837,6 +3837,50 @@ static int sky2_get_regs_len(struct net_device *dev)
 	return 0x4000;
 }
 
+static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
+{
+	/* This complicated switch statement is to make sure and
+	 * only access regions that are unreserved.
+	 * Some blocks are only valid on dual port cards.
+	 */
+	switch (b) {
+	/* second port */
+	case 5:		/* Tx Arbiter 2 */
+	case 9:		/* RX2 */
+	case 14 ... 15:	/* TX2 */
+	case 17: case 19: /* Ram Buffer 2 */
+	case 22 ... 23: /* Tx Ram Buffer 2 */
+	case 25:	/* Rx MAC Fifo 1 */
+	case 27:	/* Tx MAC Fifo 2 */
+	case 31:	/* GPHY 2 */
+	case 40 ... 47: /* Pattern Ram 2 */
+	case 52: case 54: /* TCP Segmentation 2 */
+	case 112 ... 116: /* GMAC 2 */
+		return hw->ports > 1;
+
+	case 0:		/* Control */
+	case 2:		/* Mac address */
+	case 4:		/* Tx Arbiter 1 */
+	case 7:		/* PCI express reg */
+	case 8:		/* RX1 */
+	case 12 ... 13: /* TX1 */
+	case 16: case 18:/* Rx Ram Buffer 1 */
+	case 20 ... 21: /* Tx Ram Buffer 1 */
+	case 24:	/* Rx MAC Fifo 1 */
+	case 26:	/* Tx MAC Fifo 1 */
+	case 28 ... 29: /* Descriptor and status unit */
+	case 30:	/* GPHY 1*/
+	case 32 ... 39: /* Pattern Ram 1 */
+	case 48: case 50: /* TCP Segmentation 1 */
+	case 56 ... 60:	/* PCI space */
+	case 80 ... 84:	/* GMAC 1 */
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
 /*
  * Returns copy of control register region
  * Note: ethtool_get_regs always provides full size (16k) buffer
@@ -3851,55 +3895,13 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	regs->version = 1;
 
 	for (b = 0; b < 128; b++) {
-		/* This complicated switch statement is to make sure and
-		 * only access regions that are unreserved.
-		 * Some blocks are only valid on dual port cards.
-		 * and block 3 has some special diagnostic registers that
-		 * are poison.
-		 */
-		switch (b) {
-		case 3:
-			/* skip diagnostic ram region */
+		/* skip poisonous diagnostic ram region in block 3 */
+		if (b == 3)
 			memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
-			break;
-
-		/* dual port cards only */
-		case 5:		/* Tx Arbiter 2 */
-		case 9: 	/* RX2 */
-		case 14 ... 15:	/* TX2 */
-		case 17: case 19: /* Ram Buffer 2 */
-		case 22 ... 23: /* Tx Ram Buffer 2 */
-		case 25: 	/* Rx MAC Fifo 1 */
-		case 27: 	/* Tx MAC Fifo 2 */
-		case 31:	/* GPHY 2 */
-		case 40 ... 47: /* Pattern Ram 2 */
-		case 52: case 54: /* TCP Segmentation 2 */
-		case 112 ... 116: /* GMAC 2 */
-			if (sky2->hw->ports == 1)
-				goto reserved;
-			/* fall through */
-		case 0:		/* Control */
-		case 2:		/* Mac address */
-		case 4:		/* Tx Arbiter 1 */
-		case 7:		/* PCI express reg */
-		case 8:		/* RX1 */
-		case 12 ... 13: /* TX1 */
-		case 16: case 18:/* Rx Ram Buffer 1 */
-		case 20 ... 21: /* Tx Ram Buffer 1 */
-		case 24: 	/* Rx MAC Fifo 1 */
-		case 26: 	/* Tx MAC Fifo 1 */
-		case 28 ... 29: /* Descriptor and status unit */
-		case 30:	/* GPHY 1*/
-		case 32 ... 39: /* Pattern Ram 1 */
-		case 48: case 50: /* TCP Segmentation 1 */
-		case 56 ... 60:	/* PCI space */
-		case 80 ... 84:	/* GMAC 1 */
+		else if (sky2_reg_access_ok(sky2->hw, b))
 			memcpy_fromio(p, io, 128);
-			break;
-		default:
-reserved:
+		else
 			memset(p, 0, 128);
-		}
 
 		p += 128;
 		io += 128;
-- 
cgit v1.2.3


From c36531b9b2e00d9715c3a0f5788ac5311435e078 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Thu, 31 Dec 2009 00:55:31 +0000
Subject: sky2: Lock transmit queue while disabling device

netif_device_detach() does not take the tx_lock, so it's possible that
a call to sky2_xmit_frame is still in progress after
netif_device_detach() is complete.

Take netif_tx_lock() to make sure all transmits have stopped while
we're disabling the devices and that no other CPU is still
transmitting a frame after we've disabling the device.

Proposed fix for "sky2 panic under load" reported by Berck E. Nash.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index faa48410195e..8ae8520baaf3 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3176,7 +3176,9 @@ static void sky2_reset(struct sky2_hw *hw)
 static void sky2_detach(struct net_device *dev)
 {
 	if (netif_running(dev)) {
+		netif_tx_lock(dev);
 		netif_device_detach(dev);	/* stop txq */
+		netif_tx_unlock(dev);
 		sky2_down(dev);
 	}
 }
-- 
cgit v1.2.3


From 572c526fb19a9a24098de814ab0601c1ce1bac82 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Sat, 2 Jan 2010 10:37:42 +0000
Subject: qlge: Turn on RX header split based on platform.

Using 4-byte aligned headers is problematic for some architectures.
Since qlge uses 4-byte aligned rx buffers we split headers for these
architectures into a separate buffer and then recopy to align on 2-byte boundary.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      | 19 +++++++++++++++----
 drivers/net/qlge/qlge_main.c |  6 +++---
 2 files changed, 18 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 862c1aaf3860..ee0e2bd4842f 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -54,12 +54,8 @@
 #define RX_RING_SHADOW_SPACE	(sizeof(u64) + \
 		MAX_DB_PAGES_PER_BQ(NUM_SMALL_BUFFERS) * sizeof(u64) + \
 		MAX_DB_PAGES_PER_BQ(NUM_LARGE_BUFFERS) * sizeof(u64))
-#define SMALL_BUFFER_SIZE 512
-#define SMALL_BUF_MAP_SIZE (SMALL_BUFFER_SIZE / 2)
 #define LARGE_BUFFER_MAX_SIZE 8192
 #define LARGE_BUFFER_MIN_SIZE 2048
-#define MAX_SPLIT_SIZE 1023
-#define QLGE_SB_PAD 32
 
 #define MAX_CQ 128
 #define DFLT_COALESCE_WAIT 100	/* 100 usec wait for coalescing */
@@ -737,6 +733,21 @@ enum {
 	PRB_MX_DATA = 0xfc,	/* Use semaphore */
 };
 
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#define SMALL_BUFFER_SIZE 256
+#define SMALL_BUF_MAP_SIZE SMALL_BUFFER_SIZE
+#define SPLT_SETTING  FSC_DBRST_1024
+#define SPLT_LEN 0
+#define QLGE_SB_PAD 0
+#else
+#define SMALL_BUFFER_SIZE 512
+#define SMALL_BUF_MAP_SIZE (SMALL_BUFFER_SIZE / 2)
+#define SPLT_SETTING  FSC_SH
+#define SPLT_LEN (SPLT_HDR_EP | \
+	min(SMALL_BUF_MAP_SIZE, 1023))
+#define QLGE_SB_PAD 32
+#endif
+
 /*
  * CAM output format.
  */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 707b391afa02..c3034786965d 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3332,15 +3332,15 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 
 	/* Enable the function, set pagesize, enable error checking. */
 	value = FSC_FE | FSC_EPC_INBOUND | FSC_EPC_OUTBOUND |
-	    FSC_EC | FSC_VM_PAGE_4K | FSC_SH;
+	    FSC_EC | FSC_VM_PAGE_4K;
+	value |= SPLT_SETTING;
 
 	/* Set/clear header splitting. */
 	mask = FSC_VM_PAGESIZE_MASK |
 	    FSC_DBL_MASK | FSC_DBRST_MASK | (value << 16);
 	ql_write32(qdev, FSC, mask | value);
 
-	ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
-		min(SMALL_BUF_MAP_SIZE, MAX_SPLIT_SIZE));
+	ql_write32(qdev, SPLT_HDR, SPLT_LEN);
 
 	/* Set RX packet routing to use port/pci function on which the
 	 * packet arrived on in addition to usual frame routing.
-- 
cgit v1.2.3


From 4f848c0a9c265cb3457fbf842dbffd28e82a44fd Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Sat, 2 Jan 2010 10:37:43 +0000
Subject: qlge: Add RX frame handlers for non-split frames.

New handlers are added here to handle:
1) Small frames (<256 bytes) in a single small buffer.  Allocate a new
skb and copy the frame.

2) Large frame (>256 bytes) in a page chunk. Allocate an skb, tack it on frags,
post to napi_gro_receive().

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 261 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 257 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c3034786965d..109bd0abe9b4 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1433,6 +1433,209 @@ map_error:
 	return NETDEV_TX_BUSY;
 }
 
+/* Process an inbound completion from an rx ring. */
+static void ql_process_mac_rx_page(struct ql_adapter *qdev,
+					struct rx_ring *rx_ring,
+					struct ib_mac_iocb_rsp *ib_mac_rsp,
+					u32 length,
+					u16 vlan_id)
+{
+	struct net_device *ndev = qdev->ndev;
+	struct sk_buff *skb = NULL;
+	void *addr;
+	struct bq_desc *lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
+	struct napi_struct *napi = &rx_ring->napi;
+
+	skb = netdev_alloc_skb(ndev, length);
+	if (!skb) {
+		QPRINTK(qdev, DRV, ERR, "Couldn't get an skb, "
+				"need to unwind!.\n");
+		rx_ring->rx_dropped++;
+		put_page(lbq_desc->p.pg_chunk.page);
+		return;
+	}
+
+	addr = lbq_desc->p.pg_chunk.va;
+	prefetch(addr);
+
+
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
+				ib_mac_rsp->flags2);
+		rx_ring->rx_errors++;
+		goto err_out;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		QPRINTK(qdev, DRV, ERR, "Segment too small, dropping.\n");
+		rx_ring->rx_dropped++;
+		goto err_out;
+	}
+	memcpy(skb_put(skb, ETH_HLEN), addr, ETH_HLEN);
+	QPRINTK(qdev, RX_STATUS, DEBUG,
+		"%d bytes of headers and data in large. Chain "
+		"page to new skb and pull tail.\n", length);
+	skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
+				lbq_desc->p.pg_chunk.offset+ETH_HLEN,
+				length-ETH_HLEN);
+	skb->len += length-ETH_HLEN;
+	skb->data_len += length-ETH_HLEN;
+	skb->truesize += length-ETH_HLEN;
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
+	skb->protocol = eth_type_trans(skb, ndev);
+	skb->ip_summed = CHECKSUM_NONE;
+
+	if (qdev->rx_csum &&
+		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+		/* TCP frame. */
+		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+			QPRINTK(qdev, RX_STATUS, DEBUG,
+					"TCP checksum done!\n");
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+				(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+			/* Unfragmented ipv4 UDP frame. */
+			struct iphdr *iph = (struct iphdr *) skb->data;
+			if (!(iph->frag_off &
+				cpu_to_be16(IP_MF|IP_OFFSET))) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				QPRINTK(qdev, RX_STATUS, DEBUG,
+						"TCP checksum done!\n");
+			}
+		}
+	}
+
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
+		if (qdev->vlgrp && (vlan_id != 0xffff))
+			vlan_gro_receive(napi, qdev->vlgrp, vlan_id, skb);
+		else
+			napi_gro_receive(napi, skb);
+	} else {
+		if (qdev->vlgrp && (vlan_id != 0xffff))
+			vlan_hwaccel_receive_skb(skb, qdev->vlgrp, vlan_id);
+		else
+			netif_receive_skb(skb);
+	}
+	return;
+err_out:
+	dev_kfree_skb_any(skb);
+	put_page(lbq_desc->p.pg_chunk.page);
+}
+
+/* Process an inbound completion from an rx ring. */
+static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
+					struct rx_ring *rx_ring,
+					struct ib_mac_iocb_rsp *ib_mac_rsp,
+					u32 length,
+					u16 vlan_id)
+{
+	struct net_device *ndev = qdev->ndev;
+	struct sk_buff *skb = NULL;
+	struct sk_buff *new_skb = NULL;
+	struct bq_desc *sbq_desc = ql_get_curr_sbuf(rx_ring);
+
+	skb = sbq_desc->p.skb;
+	/* Allocate new_skb and copy */
+	new_skb = netdev_alloc_skb(qdev->ndev, length + NET_IP_ALIGN);
+	if (new_skb == NULL) {
+		QPRINTK(qdev, PROBE, ERR,
+			"No skb available, drop the packet.\n");
+		rx_ring->rx_dropped++;
+		return;
+	}
+	skb_reserve(new_skb, NET_IP_ALIGN);
+	memcpy(skb_put(new_skb, length), skb->data, length);
+	skb = new_skb;
+
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
+					ib_mac_rsp->flags2);
+		dev_kfree_skb_any(skb);
+		rx_ring->rx_errors++;
+		return;
+	}
+
+	/* loopback self test for ethtool */
+	if (test_bit(QL_SELFTEST, &qdev->flags)) {
+		ql_check_lb_frame(qdev, skb);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		dev_kfree_skb_any(skb);
+		rx_ring->rx_dropped++;
+		return;
+	}
+
+	prefetch(skb->data);
+	skb->dev = ndev;
+	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
+		QPRINTK(qdev, RX_STATUS, DEBUG, "%s%s%s Multicast.\n",
+			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "",
+			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			IB_MAC_IOCB_RSP_M_REG ? "Registered" : "",
+			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+	}
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P)
+		QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
+	skb->protocol = eth_type_trans(skb, ndev);
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* If rx checksum is on, and there are no
+	 * csum or frame errors.
+	 */
+	if (qdev->rx_csum &&
+		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+		/* TCP frame. */
+		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+			QPRINTK(qdev, RX_STATUS, DEBUG,
+					"TCP checksum done!\n");
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+				(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+			/* Unfragmented ipv4 UDP frame. */
+			struct iphdr *iph = (struct iphdr *) skb->data;
+			if (!(iph->frag_off &
+				cpu_to_be16(IP_MF|IP_OFFSET))) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				QPRINTK(qdev, RX_STATUS, DEBUG,
+						"TCP checksum done!\n");
+			}
+		}
+	}
+
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
+		if (qdev->vlgrp && (vlan_id != 0xffff))
+			vlan_gro_receive(&rx_ring->napi, qdev->vlgrp,
+						vlan_id, skb);
+		else
+			napi_gro_receive(&rx_ring->napi, skb);
+	} else {
+		if (qdev->vlgrp && (vlan_id != 0xffff))
+			vlan_hwaccel_receive_skb(skb, qdev->vlgrp, vlan_id);
+		else
+			netif_receive_skb(skb);
+	}
+}
+
 static void ql_realign_skb(struct sk_buff *skb, int len)
 {
 	void *temp_addr = skb->data;
@@ -1646,14 +1849,13 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 }
 
 /* Process an inbound completion from an rx ring. */
-static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
+static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 				   struct rx_ring *rx_ring,
-				   struct ib_mac_iocb_rsp *ib_mac_rsp)
+				   struct ib_mac_iocb_rsp *ib_mac_rsp,
+				   u16 vlan_id)
 {
 	struct net_device *ndev = qdev->ndev;
 	struct sk_buff *skb = NULL;
-	u16 vlan_id = (le16_to_cpu(ib_mac_rsp->vlan_id) &
-			IB_MAC_IOCB_RSP_VLAN_MASK)
 
 	QL_DUMP_IB_MAC_RSP(ib_mac_rsp);
 
@@ -1753,6 +1955,57 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 	}
 }
 
+/* Process an inbound completion from an rx ring. */
+static unsigned long ql_process_mac_rx_intr(struct ql_adapter *qdev,
+					struct rx_ring *rx_ring,
+					struct ib_mac_iocb_rsp *ib_mac_rsp)
+{
+	u32 length = le32_to_cpu(ib_mac_rsp->data_len);
+	u16 vlan_id = (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
+			((le16_to_cpu(ib_mac_rsp->vlan_id) &
+			IB_MAC_IOCB_RSP_VLAN_MASK)) : 0xffff;
+
+	QL_DUMP_IB_MAC_RSP(ib_mac_rsp);
+
+	if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV) {
+		/* The data and headers are split into
+		 * separate buffers.
+		 */
+		ql_process_mac_split_rx_intr(qdev, rx_ring, ib_mac_rsp,
+						vlan_id);
+	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
+		/* The data fit in a single small buffer.
+		 * Allocate a new skb, copy the data and
+		 * return the buffer to the free pool.
+		 */
+		ql_process_mac_rx_skb(qdev, rx_ring, ib_mac_rsp,
+						length, vlan_id);
+	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
+		/* Non-TCP packet in a page chunk. Allocate an
+		 * skb, tack it on frags, and send it up.
+		 */
+		ql_process_mac_rx_page(qdev, rx_ring, ib_mac_rsp,
+						length, vlan_id);
+	} else {
+		struct bq_desc *lbq_desc;
+
+		/* Free small buffer that holds the IAL */
+		lbq_desc = ql_get_curr_sbuf(rx_ring);
+		QPRINTK(qdev, RX_ERR, ERR, "Dropping frame, len %d > mtu %d\n",
+			length, qdev->ndev->mtu);
+
+		/* Unwind the large buffers for this frame. */
+		while (length > 0) {
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
+			length -= (length < rx_ring->lbq_buf_size) ?
+				length : rx_ring->lbq_buf_size;
+			put_page(lbq_desc->p.pg_chunk.page);
+		}
+	}
+
+	return (unsigned long)length;
+}
+
 /* Process an outbound completion from an rx ring. */
 static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
 				   struct ob_mac_iocb_rsp *mac_rsp)
-- 
cgit v1.2.3


From 635267130855e91f4681df5e4d26ca9ce908447f Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Sat, 2 Jan 2010 10:37:44 +0000
Subject: qlge: Add napi gro frags interface.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 109bd0abe9b4..e9d6481ed9eb 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1433,6 +1433,51 @@ map_error:
 	return NETDEV_TX_BUSY;
 }
 
+/* Process an inbound completion from an rx ring. */
+static void ql_process_mac_rx_gro_page(struct ql_adapter *qdev,
+					struct rx_ring *rx_ring,
+					struct ib_mac_iocb_rsp *ib_mac_rsp,
+					u32 length,
+					u16 vlan_id)
+{
+	struct sk_buff *skb;
+	struct bq_desc *lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
+	struct skb_frag_struct *rx_frag;
+	int nr_frags;
+	struct napi_struct *napi = &rx_ring->napi;
+
+	napi->dev = qdev->ndev;
+
+	skb = napi_get_frags(napi);
+	if (!skb) {
+		QPRINTK(qdev, DRV, ERR, "Couldn't get an skb, exiting.\n");
+		rx_ring->rx_dropped++;
+		put_page(lbq_desc->p.pg_chunk.page);
+		return;
+	}
+	prefetch(lbq_desc->p.pg_chunk.va);
+	rx_frag = skb_shinfo(skb)->frags;
+	nr_frags = skb_shinfo(skb)->nr_frags;
+	rx_frag += nr_frags;
+	rx_frag->page = lbq_desc->p.pg_chunk.page;
+	rx_frag->page_offset = lbq_desc->p.pg_chunk.offset;
+	rx_frag->size = length;
+
+	skb->len += length;
+	skb->data_len += length;
+	skb->truesize += length;
+	skb_shinfo(skb)->nr_frags++;
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += length;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (qdev->vlgrp && (vlan_id != 0xffff))
+		vlan_gro_frags(&rx_ring->napi, qdev->vlgrp, vlan_id);
+	else
+		napi_gro_frags(napi);
+}
+
 /* Process an inbound completion from an rx ring. */
 static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 					struct rx_ring *rx_ring,
@@ -1980,6 +2025,14 @@ static unsigned long ql_process_mac_rx_intr(struct ql_adapter *qdev,
 		 */
 		ql_process_mac_rx_skb(qdev, rx_ring, ib_mac_rsp,
 						length, vlan_id);
+	} else if ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) &&
+		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK) &&
+		(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T)) {
+		/* TCP packet in a page chunk that's been checksummed.
+		 * Tack it on to our GRO skb and let it go.
+		 */
+		ql_process_mac_rx_gro_page(qdev, rx_ring, ib_mac_rsp,
+						length, vlan_id);
 	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
 		/* Non-TCP packet in a page chunk. Allocate an
 		 * skb, tack it on frags, and send it up.
-- 
cgit v1.2.3


From 698244ace8b63896565022143ab19f141bc48993 Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 20:35:14 -0800
Subject: phy: SMSC device Energy Detect power-down mode

SMSC Ethernet Transceivers (LAN88710, LAN8710, LAN8720, LAN8187,
LAN8700, LAN83C185) provide a mechanism to conserve power when
the device is not connected to an active link partner
(Energy Detect Mode).
So this patch enables the Energy Detect power-down mode
for these Transceivers.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/smsc.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 5123bb954dd7..ed2644a57500 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -25,6 +25,7 @@
 
 #define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */
 #define MII_LAN83C185_IM  30 /* Interrupt Mask */
+#define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */
 
 #define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */
 #define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */
@@ -37,8 +38,10 @@
 #define MII_LAN83C185_ISF_INT_ALL (0x0e)
 
 #define MII_LAN83C185_ISF_INT_PHYLIB_EVENTS \
-	(MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4)
+	(MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4 | \
+	 MII_LAN83C185_ISF_INT7)
 
+#define MII_LAN83C185_EDPWRDOWN	(1 << 13) /* EDPWRDOWN */
 
 static int smsc_phy_config_intr(struct phy_device *phydev)
 {
@@ -59,9 +62,23 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 
 static int smsc_phy_config_init(struct phy_device *phydev)
 {
+	int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+	if (rc < 0)
+		return rc;
+
+	/* Enable energy detect mode for this SMSC Transceivers */
+	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+		       rc | MII_LAN83C185_EDPWRDOWN);
+	if (rc < 0)
+		return rc;
+
 	return smsc_phy_ack_interrupt (phydev);
 }
 
+static int lan911x_config_init(struct phy_device *phydev)
+{
+	return smsc_phy_ack_interrupt(phydev);
+}
 
 static struct phy_driver lan83c185_driver = {
 	.phy_id		= 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
@@ -147,7 +164,7 @@ static struct phy_driver lan911x_int_driver = {
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.config_init	= smsc_phy_config_init,
+	.config_init	= lan911x_config_init,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
-- 
cgit v1.2.3


From 35076402a9936fa8a73b57a1f97fecbeceeec34a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 4 Jan 2010 11:52:59 +0000
Subject: drivers/net/mac8390.c: Indent case labels

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mac8390.c | 252 +++++++++++++++++++++++++-------------------------
 1 file changed, 126 insertions(+), 126 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index f8fa0c3f0f64..6b6f375440a2 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -164,70 +164,70 @@ static void word_memcpy_fromcard(void *tp, const void *fp, int count);
 static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev)
 {
 	switch (dev->dr_sw) {
-		case NUBUS_DRSW_3COM:
-			switch (dev->dr_hw) {
-				case NUBUS_DRHW_APPLE_SONIC_NB:
-				case NUBUS_DRHW_APPLE_SONIC_LC:
-				case NUBUS_DRHW_SONNET:
-					return MAC8390_NONE;
-					break;
-				default:
-					return MAC8390_APPLE;
-					break;
-			}
+	case NUBUS_DRSW_3COM:
+		switch (dev->dr_hw) {
+		case NUBUS_DRHW_APPLE_SONIC_NB:
+		case NUBUS_DRHW_APPLE_SONIC_LC:
+		case NUBUS_DRHW_SONNET:
+			return MAC8390_NONE;
 			break;
-
-		case NUBUS_DRSW_APPLE:
-			switch (dev->dr_hw) {
-				case NUBUS_DRHW_ASANTE_LC:
-					return MAC8390_NONE;
-					break;
-				case NUBUS_DRHW_CABLETRON:
-					return MAC8390_CABLETRON;
-					break;
-				default:
-					return MAC8390_APPLE;
-					break;
-			}
+		default:
+			return MAC8390_APPLE;
 			break;
+		}
+		break;
 
-		case NUBUS_DRSW_ASANTE:
-			return MAC8390_ASANTE;
+	case NUBUS_DRSW_APPLE:
+		switch (dev->dr_hw) {
+		case NUBUS_DRHW_ASANTE_LC:
+			return MAC8390_NONE;
 			break;
-
-		case NUBUS_DRSW_TECHWORKS:
-		case NUBUS_DRSW_DAYNA2:
-		case NUBUS_DRSW_DAYNA_LC:
-			if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
-				return MAC8390_CABLETRON;
-			else
-				return MAC8390_APPLE;
+		case NUBUS_DRHW_CABLETRON:
+			return MAC8390_CABLETRON;
 			break;
-
-		case NUBUS_DRSW_FARALLON:
-			return MAC8390_FARALLON;
+		default:
+			return MAC8390_APPLE;
 			break;
+		}
+		break;
 
-		case NUBUS_DRSW_KINETICS:
-			switch (dev->dr_hw) {
-				case NUBUS_DRHW_INTERLAN:
-					return MAC8390_INTERLAN;
-					break;
-				default:
-					return MAC8390_KINETICS;
-					break;
-			}
-			break;
+	case NUBUS_DRSW_ASANTE:
+		return MAC8390_ASANTE;
+		break;
+
+	case NUBUS_DRSW_TECHWORKS:
+	case NUBUS_DRSW_DAYNA2:
+	case NUBUS_DRSW_DAYNA_LC:
+		if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
+			return MAC8390_CABLETRON;
+		else
+			return MAC8390_APPLE;
+		break;
+
+	case NUBUS_DRSW_FARALLON:
+		return MAC8390_FARALLON;
+		break;
 
-		case NUBUS_DRSW_DAYNA:
-			// These correspond to Dayna Sonic cards
-			// which use the macsonic driver
-			if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
-				dev->dr_hw == NUBUS_DRHW_INTERLAN )
-				return MAC8390_NONE;
-			else
-				return MAC8390_DAYNA;
+	case NUBUS_DRSW_KINETICS:
+		switch (dev->dr_hw) {
+		case NUBUS_DRHW_INTERLAN:
+			return MAC8390_INTERLAN;
 			break;
+		default:
+			return MAC8390_KINETICS;
+			break;
+		}
+		break;
+
+	case NUBUS_DRSW_DAYNA:
+		// These correspond to Dayna Sonic cards
+		// which use the macsonic driver
+		if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
+		    dev->dr_hw == NUBUS_DRHW_INTERLAN )
+			return MAC8390_NONE;
+		else
+			return MAC8390_DAYNA;
+		break;
 	}
 	return MAC8390_NONE;
 }
@@ -373,54 +373,54 @@ struct net_device * __init mac8390_probe(int unit)
 			dev->mem_end = dev->mem_start + offset;
 		} else {
 			switch (cardtype) {
-				case MAC8390_KINETICS:
-				case MAC8390_DAYNA: /* it's the same */
-					dev->base_addr =
-						(int)(ndev->board->slot_addr +
-						DAYNA_8390_BASE);
-					dev->mem_start =
-						(int)(ndev->board->slot_addr +
-						DAYNA_8390_MEM);
-					dev->mem_end =
-						dev->mem_start +
-						mac8390_memsize(dev->mem_start);
-					break;
-				case MAC8390_INTERLAN:
-					dev->base_addr =
-						(int)(ndev->board->slot_addr +
-						INTERLAN_8390_BASE);
-					dev->mem_start =
-						(int)(ndev->board->slot_addr +
-						INTERLAN_8390_MEM);
-					dev->mem_end =
-						dev->mem_start +
-						mac8390_memsize(dev->mem_start);
-					break;
-				case MAC8390_CABLETRON:
-					dev->base_addr =
-						(int)(ndev->board->slot_addr +
-						CABLETRON_8390_BASE);
-					dev->mem_start =
-						(int)(ndev->board->slot_addr +
-						CABLETRON_8390_MEM);
-					/* The base address is unreadable if 0x00
-					 * has been written to the command register
-					 * Reset the chip by writing E8390_NODMA +
-					 *   E8390_PAGE0 + E8390_STOP just to be
-					 *   sure
-					 */
-					i = (void *)dev->base_addr;
-					*i = 0x21;
-					dev->mem_end =
-						dev->mem_start +
-						mac8390_memsize(dev->mem_start);
-					break;
-
-				default:
-					printk(KERN_ERR "Card type %s is"
-					       " unsupported, sorry\n",
-					       ndev->board->name);
-					continue;
+			case MAC8390_KINETICS:
+			case MAC8390_DAYNA: /* it's the same */
+				dev->base_addr =
+					(int)(ndev->board->slot_addr +
+					      DAYNA_8390_BASE);
+				dev->mem_start =
+					(int)(ndev->board->slot_addr +
+					      DAYNA_8390_MEM);
+				dev->mem_end =
+					dev->mem_start +
+					mac8390_memsize(dev->mem_start);
+				break;
+			case MAC8390_INTERLAN:
+				dev->base_addr =
+					(int)(ndev->board->slot_addr +
+					      INTERLAN_8390_BASE);
+				dev->mem_start =
+					(int)(ndev->board->slot_addr +
+					      INTERLAN_8390_MEM);
+				dev->mem_end =
+					dev->mem_start +
+					mac8390_memsize(dev->mem_start);
+				break;
+			case MAC8390_CABLETRON:
+				dev->base_addr =
+					(int)(ndev->board->slot_addr +
+					      CABLETRON_8390_BASE);
+				dev->mem_start =
+					(int)(ndev->board->slot_addr +
+					      CABLETRON_8390_MEM);
+				/* The base address is unreadable if 0x00
+				 * has been written to the command register
+				 * Reset the chip by writing E8390_NODMA +
+				 *   E8390_PAGE0 + E8390_STOP just to be
+				 *   sure
+				 */
+				i = (void *)dev->base_addr;
+				*i = 0x21;
+				dev->mem_end =
+					dev->mem_start +
+					mac8390_memsize(dev->mem_start);
+				break;
+
+			default:
+				printk(KERN_ERR "Card type %s is"
+				       " unsupported, sorry\n",
+				       ndev->board->name);
+				continue;
 			}
 		}
 
@@ -540,33 +540,33 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 	}
 
 	/* Fill in model-specific information and functions */
-	switch(type) {
+	switch (type) {
 	case MAC8390_FARALLON:
 	case MAC8390_APPLE:
-		switch(mac8390_testio(dev->mem_start)) {
-			case ACCESS_UNKNOWN:
-				printk("Don't know how to access card memory!\n");
-				return -ENODEV;
-				break;
+		switch (mac8390_testio(dev->mem_start)) {
+		case ACCESS_UNKNOWN:
+			printk("Don't know how to access card memory!\n");
+			return -ENODEV;
+			break;
 
-			case ACCESS_16:
-				/* 16 bit card, register map is reversed */
-				ei_status.reset_8390 = &mac8390_no_reset;
-				ei_status.block_input = &slow_sane_block_input;
-				ei_status.block_output = &slow_sane_block_output;
-				ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
-				ei_status.reg_offset = back4_offsets;
-				break;
+		case ACCESS_16:
+			/* 16 bit card, register map is reversed */
+			ei_status.reset_8390 = &mac8390_no_reset;
+			ei_status.block_input = &slow_sane_block_input;
+			ei_status.block_output = &slow_sane_block_output;
+			ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
+			ei_status.reg_offset = back4_offsets;
+			break;
 
-			case ACCESS_32:
-				/* 32 bit card, register map is reversed */
-				ei_status.reset_8390 = &mac8390_no_reset;
-				ei_status.block_input = &sane_block_input;
-				ei_status.block_output = &sane_block_output;
-				ei_status.get_8390_hdr = &sane_get_8390_hdr;
-				ei_status.reg_offset = back4_offsets;
-				access_bitmode = 1;
-				break;
+		case ACCESS_32:
+			/* 32 bit card, register map is reversed */
+			ei_status.reset_8390 = &mac8390_no_reset;
+			ei_status.block_input = &sane_block_input;
+			ei_status.block_output = &sane_block_output;
+			ei_status.get_8390_hdr = &sane_get_8390_hdr;
+			ei_status.reg_offset = back4_offsets;
+			access_bitmode = 1;
+			break;
 		}
 		break;
 
-- 
cgit v1.2.3


From 5c7fffd0e3b57cb63f50bbd710868f012d67654f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 4 Jan 2010 11:53:00 +0000
Subject: drivers/net/mac8390.c: Remove useless memcpy casting

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mac8390.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 6b6f375440a2..517cee45c086 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -237,14 +237,14 @@ static enum mac8390_access __init mac8390_testio(volatile unsigned long membase)
 	unsigned long outdata = 0xA5A0B5B0;
 	unsigned long indata =  0x00000000;
 	/* Try writing 32 bits */
-	memcpy((char *)membase, (char *)&outdata, 4);
+	memcpy(membase, &outdata, 4);
 	/* Now compare them */
 	if (memcmp((char *)&outdata, (char *)membase, 4) == 0)
 		return ACCESS_32;
 	/* Write 16 bit output */
-	word_memcpy_tocard((char *)membase, (char *)&outdata, 4);
+	word_memcpy_tocard(membase, &outdata, 4);
 	/* Now read it back */
-	word_memcpy_fromcard((char *)&indata, (char *)membase, 4);
+	word_memcpy_fromcard(&indata, membase, 4);
 	if (outdata == indata)
 		return ACCESS_16;
 	return ACCESS_UNKNOWN;
@@ -759,7 +759,7 @@ static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
 
-	dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4);
+	dayna_memcpy_fromcard(dev, hdr, hdr_start, 4);
 	/* Fix endianness */
 	hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8);
 }
@@ -801,7 +801,7 @@ static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr
 	int ring_page)
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
-	word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4);
+	word_memcpy_fromcard(hdr, (char *)dev->mem_start + hdr_start, 4);
 	/* Register endianism - fix here rather than 8390.c */
 	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
 }
@@ -816,16 +816,17 @@ static void slow_sane_block_input(struct net_device *dev, int count, struct sk_b
 	{
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
-		word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
-			xfer_base, semi_count);
+		word_memcpy_fromcard(skb->data,
+				     (char *)dev->mem_start + xfer_base,
+				     semi_count);
 		count -= semi_count;
 		word_memcpy_fromcard(skb->data + semi_count,
 				     (char *)ei_status.rmem_start, count);
 	}
 	else
 	{
-		word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
-			xfer_base, count);
+		word_memcpy_fromcard(skb->data,
+				     (char *)dev->mem_start + xfer_base, count);
 	}
 }
 
-- 
cgit v1.2.3


From 18c0019102228875cb0f6f252dad5148491e96b2 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 4 Jan 2010 11:53:01 +0000
Subject: drivers/net/mac8390.c: Convert printk(KERN_<level> to pr_<level>(

Use printk_once
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks without KERN_<level> to pr_info and pr_cont

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mac8390.c | 57 ++++++++++++++++++++++-----------------------------
 1 file changed, 25 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 517cee45c086..8bd09e280c9e 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -17,6 +17,8 @@
 /* 2002-12-30: Try to support more cards, some clues from NetBSD driver */
 /* 2003-12-26: Make sure Asante cards always work. */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -42,7 +44,7 @@
 #include <asm/macints.h>
 
 static char version[] =
-	"mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
+	"v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
 
 #define EI_SHIFT(x)	(ei_local->reg_offset[x])
 #define ei_inb(port)   in_8(port)
@@ -288,7 +290,6 @@ struct net_device * __init mac8390_probe(int unit)
 {
 	struct net_device *dev;
 	volatile unsigned short *i;
-	int version_disp = 0;
 	struct nubus_dev * ndev = NULL;
 	int err = -ENODEV;
 
@@ -320,10 +321,7 @@ struct net_device * __init mac8390_probe(int unit)
 		if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
 			continue;
 
-		if (version_disp == 0) {
-			version_disp = 1;
-			printk(version);
-		}
+		printk_once(KERN_INFO pr_fmt(version));
 
 		dev->irq = SLOT2IRQ(ndev->board->slot);
 		/* This is getting to be a habit */
@@ -333,16 +331,14 @@ struct net_device * __init mac8390_probe(int unit)
 		   of where its memory and registers are. */
 
 		if (nubus_get_func_dir(ndev, &dir) == -1) {
-			printk(KERN_ERR "%s: Unable to get Nubus functional"
-					" directory for slot %X!\n",
+			pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
 			       dev->name, ndev->board->slot);
 			continue;
 		}
 
 		/* Get the MAC address */
 		if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
-			printk(KERN_INFO "%s: Couldn't get MAC address!\n",
-					dev->name);
+			pr_info("%s: Couldn't get MAC address!\n", dev->name);
 			continue;
 		} else {
 			nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
@@ -351,8 +347,7 @@ struct net_device * __init mac8390_probe(int unit)
 		if (useresources[cardtype] == 1) {
 			nubus_rewinddir(&dir);
 			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
-				printk(KERN_ERR "%s: Memory offset resource"
-						" for slot %X not found!\n",
+				pr_err("%s: Memory offset resource for slot %X not found!\n",
 				       dev->name, ndev->board->slot);
 				continue;
 			}
@@ -362,10 +357,8 @@ struct net_device * __init mac8390_probe(int unit)
 			dev->base_addr = dev->mem_start + 0x10000;
 			nubus_rewinddir(&dir);
 			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
-				printk(KERN_INFO "%s: Memory length resource"
-						 " for slot %X not found"
-						 ", probing\n",
-				       dev->name, ndev->board->slot);
+				pr_info("%s: Memory length resource for slot %X not found, probing\n",
+					dev->name, ndev->board->slot);
 				offset = mac8390_memsize(dev->mem_start);
 				} else {
 					nubus_get_rsrc_mem(&offset, &ent, 4);
@@ -417,8 +410,7 @@ struct net_device * __init mac8390_probe(int unit)
 				break;
 
 			default:
-				printk(KERN_ERR "Card type %s is"
-				       " unsupported, sorry\n",
+				pr_err("Card type %s is unsupported, sorry\n",
 				       ndev->board->name);
 				continue;
 			}
@@ -458,7 +450,7 @@ int init_module(void)
 		dev_mac890[i] = dev;
 	}
 	if (!i) {
-		printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n");
+		pr_notice("No useable cards found, driver NOT installed.\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -545,7 +537,7 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 	case MAC8390_APPLE:
 		switch (mac8390_testio(dev->mem_start)) {
 		case ACCESS_UNKNOWN:
-			printk("Don't know how to access card memory!\n");
+			pr_info("Don't know how to access card memory!\n");
 			return -ENODEV;
 			break;
 
@@ -612,20 +604,21 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 	        break;
 
 	default:
-		printk(KERN_ERR "Card type %s is unsupported, sorry\n", ndev->board->name);
+		pr_err("Card type %s is unsupported, sorry\n",
+		       ndev->board->name);
 		return -ENODEV;
 	}
 
 	__NS8390_init(dev, 0);
 
 	/* Good, done, now spit out some messages */
-	printk(KERN_INFO "%s: %s in slot %X (type %s)\n",
-	       dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
-	printk(KERN_INFO
-	       "MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
-	       dev->dev_addr, dev->irq,
-	       (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
-	       dev->mem_start, access_bitmode ? 32 : 16);
+	pr_info("%s: %s in slot %X (type %s)\n",
+		dev->name, ndev->board->name, ndev->board->slot,
+		cardname[type]);
+	pr_info("MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
+		dev->dev_addr, dev->irq,
+		(unsigned int)(dev->mem_end - dev->mem_start) >> 10,
+		dev->mem_start, access_bitmode ? 32 : 16);
 	return 0;
 }
 
@@ -633,7 +626,7 @@ static int mac8390_open(struct net_device *dev)
 {
 	__ei_open(dev);
 	if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) {
-		printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
+		pr_info("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
 	return 0;
@@ -650,7 +643,7 @@ static void mac8390_no_reset(struct net_device *dev)
 {
 	ei_status.txing = 0;
 	if (ei_debug > 1)
-		printk("reset not supported\n");
+		pr_info("reset not supported\n");
 	return;
 }
 
@@ -658,11 +651,11 @@ static void interlan_reset(struct net_device *dev)
 {
 	unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq));
 	if (ei_debug > 1)
-		printk("Need to reset the NS8390 t=%lu...", jiffies);
+		pr_info("Need to reset the NS8390 t=%lu...", jiffies);
 	ei_status.txing = 0;
 	target[0xC0000] = 0;
 	if (ei_debug > 1)
-		printk("reset complete\n");
+		pr_cont("reset complete\n");
 	return;
 }
 
-- 
cgit v1.2.3


From 8e4d9696b45d966c7af5b2aeb6f98ff687c58964 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 4 Jan 2010 11:53:02 +0000
Subject: drivers/net/mac8390.c: Checkpatch cleanups

Use #include <linux/ not #include <asm/
Add spaces after arguments
Comment neatening
Make a couple of arrays static const
Align function arguments
Wrap text at 80 columns where reasonable
Cuddle brace else

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mac8390.c | 229 +++++++++++++++++++++++++++-----------------------
 1 file changed, 122 insertions(+), 107 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 8bd09e280c9e..8f168893caa9 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -36,9 +36,9 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/bitops.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/hwtest.h>
 #include <asm/macints.h>
@@ -47,20 +47,25 @@ static char version[] =
 	"v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
 
 #define EI_SHIFT(x)	(ei_local->reg_offset[x])
-#define ei_inb(port)   in_8(port)
-#define ei_outb(val,port)  out_8(port,val)
-#define ei_inb_p(port)   in_8(port)
-#define ei_outb_p(val,port)  out_8(port,val)
+#define ei_inb(port)	in_8(port)
+#define ei_outb(val, port)	out_8(port, val)
+#define ei_inb_p(port)	in_8(port)
+#define ei_outb_p(val, port)	out_8(port, val)
 
 #include "lib8390.c"
 
 #define WD_START_PG			0x00	/* First page of TX buffer */
 #define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */
 #define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */
-#define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG  /* First page of TX buffer */
+#define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG
+						/* First page of TX buffer */
 
-/* Unfortunately it seems we have to hardcode these for the moment */
-/* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */
+/*
+ * Unfortunately it seems we have to hardcode these for the moment
+ * Shouldn't the card know about this?
+ * Does anyone know where to read it off the card?
+ * Do we trust the data provided by the card?
+ */
 
 #define DAYNA_8390_BASE		0x80000
 #define DAYNA_8390_MEM		0x00000
@@ -82,7 +87,7 @@ enum mac8390_type {
 	MAC8390_KINETICS,
 };
 
-static const char * cardname[] = {
+static const char *cardname[] = {
 	"apple",
 	"asante",
 	"farallon",
@@ -92,7 +97,7 @@ static const char * cardname[] = {
 	"kinetics",
 };
 
-static int word16[] = {
+static const int word16[] = {
 	1, /* apple */
 	1, /* asante */
 	1, /* farallon */
@@ -103,7 +108,7 @@ static int word16[] = {
 };
 
 /* on which cards do we use NuBus resources? */
-static int useresources[] = {
+static const int useresources[] = {
 	1, /* apple */
 	1, /* asante */
 	1, /* farallon */
@@ -119,22 +124,22 @@ enum mac8390_access {
 	ACCESS_16,
 };
 
-extern int mac8390_memtest(struct net_device * dev);
-static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
+extern int mac8390_memtest(struct net_device *dev);
+static int mac8390_initdev(struct net_device *dev, struct nubus_dev *ndev,
 			   enum mac8390_type type);
 
-static int mac8390_open(struct net_device * dev);
-static int mac8390_close(struct net_device * dev);
+static int mac8390_open(struct net_device *dev);
+static int mac8390_close(struct net_device *dev);
 static void mac8390_no_reset(struct net_device *dev);
 static void interlan_reset(struct net_device *dev);
 
 /* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/
 static void sane_get_8390_hdr(struct net_device *dev,
 			      struct e8390_pkt_hdr *hdr, int ring_page);
-static void sane_block_input(struct net_device * dev, int count,
-			     struct sk_buff * skb, int ring_offset);
-static void sane_block_output(struct net_device * dev, int count,
-			      const unsigned char * buf, const int start_page);
+static void sane_block_input(struct net_device *dev, int count,
+			     struct sk_buff *skb, int ring_offset);
+static void sane_block_output(struct net_device *dev, int count,
+			      const unsigned char *buf, const int start_page);
 
 /* dayna_memcpy to and from card */
 static void dayna_memcpy_fromcard(struct net_device *dev, void *to,
@@ -150,8 +155,8 @@ static void dayna_block_input(struct net_device *dev, int count,
 static void dayna_block_output(struct net_device *dev, int count,
 			       const unsigned char *buf, int start_page);
 
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
 
 /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
 static void slow_sane_get_8390_hdr(struct net_device *dev,
@@ -222,10 +227,12 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev)
 		break;
 
 	case NUBUS_DRSW_DAYNA:
-		// These correspond to Dayna Sonic cards
-		// which use the macsonic driver
+		/*
+		 * These correspond to Dayna Sonic cards
+		 * which use the macsonic driver
+		 */
 		if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
-		    dev->dr_hw == NUBUS_DRHW_INTERLAN )
+		    dev->dr_hw == NUBUS_DRHW_INTERLAN)
 			return MAC8390_NONE;
 		else
 			return MAC8390_DAYNA;
@@ -260,7 +267,7 @@ static int __init mac8390_memsize(unsigned long membase)
 	local_irq_save(flags);
 	/* Check up to 32K in 4K increments */
 	for (i = 0; i < 8; i++) {
-		volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000));
+		volatile unsigned short *m = (unsigned short *)(membase + (i * 0x1000));
 
 		/* Unwriteable - we have a fully decoded card and the
 		   RAM end located */
@@ -275,22 +282,24 @@ static int __init mac8390_memsize(unsigned long membase)
 
 		/* check for partial decode and wrap */
 		for (j = 0; j < i; j++) {
-			volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000));
+			volatile unsigned short *p = (unsigned short *)(membase + (j * 0x1000));
 			if (*p != (0xA5A0 | j))
 				break;
- 		}
- 	}
+		}
+	}
 	local_irq_restore(flags);
-	/* in any case, we stopped once we tried one block too many,
-           or once we reached 32K */
- 	return i * 0x1000;
+	/*
+	 * in any case, we stopped once we tried one block too many,
+	 * or once we reached 32K
+	 */
+	return i * 0x1000;
 }
 
 struct net_device * __init mac8390_probe(int unit)
 {
 	struct net_device *dev;
 	volatile unsigned short *i;
-	struct nubus_dev * ndev = NULL;
+	struct nubus_dev *ndev = NULL;
 	int err = -ENODEV;
 
 	struct nubus_dir dir;
@@ -312,20 +321,23 @@ struct net_device * __init mac8390_probe(int unit)
 	if (unit >= 0)
 		sprintf(dev->name, "eth%d", unit);
 
-	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) {
+	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET,
+				       ndev))) {
 		/* Have we seen it already? */
 		if (slots & (1<<ndev->board->slot))
 			continue;
 		slots |= 1<<ndev->board->slot;
 
-		if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
+		cardtype = mac8390_ident(ndev);
+		if (cardtype == MAC8390_NONE)
 			continue;
 
 		printk_once(KERN_INFO pr_fmt(version));
 
 		dev->irq = SLOT2IRQ(ndev->board->slot);
 		/* This is getting to be a habit */
-		dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20);
+		dev->base_addr = (ndev->board->slot_addr |
+				  ((ndev->board->slot & 0xf) << 20));
 
 		/* Get some Nubus info - we will trust the card's idea
 		   of where its memory and registers are. */
@@ -337,7 +349,7 @@ struct net_device * __init mac8390_probe(int unit)
 		}
 
 		/* Get the MAC address */
-		if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
+		if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
 			pr_info("%s: Couldn't get MAC address!\n", dev->name);
 			continue;
 		} else {
@@ -346,7 +358,8 @@ struct net_device * __init mac8390_probe(int unit)
 
 		if (useresources[cardtype] == 1) {
 			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
+			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
+					    &ent) == -1) {
 				pr_err("%s: Memory offset resource for slot %X not found!\n",
 				       dev->name, ndev->board->slot);
 				continue;
@@ -356,7 +369,8 @@ struct net_device * __init mac8390_probe(int unit)
 			/* yes, this is how the Apple driver does it */
 			dev->base_addr = dev->mem_start + 0x10000;
 			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
+			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
+					    &ent) == -1) {
 				pr_info("%s: Memory length resource for slot %X not found, probing\n",
 					dev->name, ndev->board->slot);
 				offset = mac8390_memsize(dev->mem_start);
@@ -485,22 +499,23 @@ static const struct net_device_ops mac8390_netdev_ops = {
 #endif
 };
 
-static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
-			    enum mac8390_type type)
+static int __init mac8390_initdev(struct net_device *dev,
+				  struct nubus_dev *ndev,
+				  enum mac8390_type type)
 {
-	static u32 fwrd4_offsets[16]={
+	static u32 fwrd4_offsets[16] = {
 		0,      4,      8,      12,
 		16,     20,     24,     28,
 		32,     36,     40,     44,
 		48,     52,     56,     60
 	};
-	static u32 back4_offsets[16]={
+	static u32 back4_offsets[16] = {
 		60,     56,     52,     48,
 		44,     40,     36,     32,
 		28,     24,     20,     16,
 		12,     8,      4,      0
 	};
-	static u32 fwrd2_offsets[16]={
+	static u32 fwrd2_offsets[16] = {
 		0,      2,      4,      6,
 		8,     10,     12,     14,
 		16,    18,     20,     22,
@@ -518,17 +533,17 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 
 	/* Cabletron's TX/RX buffers are backwards */
 	if (type == MAC8390_CABLETRON) {
-               ei_status.tx_start_page = CABLETRON_TX_START_PG;
-               ei_status.rx_start_page = CABLETRON_RX_START_PG;
-               ei_status.stop_page = CABLETRON_RX_STOP_PG;
-               ei_status.rmem_start = dev->mem_start;
-               ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
+		ei_status.tx_start_page = CABLETRON_TX_START_PG;
+		ei_status.rx_start_page = CABLETRON_RX_START_PG;
+		ei_status.stop_page = CABLETRON_RX_STOP_PG;
+		ei_status.rmem_start = dev->mem_start;
+		ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
 	} else {
-               ei_status.tx_start_page = WD_START_PG;
-               ei_status.rx_start_page = WD_START_PG + TX_PAGES;
-               ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
-               ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
-               ei_status.rmem_end = dev->mem_end;
+		ei_status.tx_start_page = WD_START_PG;
+		ei_status.rx_start_page = WD_START_PG + TX_PAGES;
+		ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
+		ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
+		ei_status.rmem_end = dev->mem_end;
 	}
 
 	/* Fill in model-specific information and functions */
@@ -600,8 +615,8 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 		ei_status.block_input = &slow_sane_block_input;
 		ei_status.block_output = &slow_sane_block_output;
 		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
-	        ei_status.reg_offset = fwrd4_offsets;
-	        break;
+		ei_status.reg_offset = fwrd4_offsets;
+		break;
 
 	default:
 		pr_err("Card type %s is unsupported, sorry\n",
@@ -649,7 +664,7 @@ static void mac8390_no_reset(struct net_device *dev)
 
 static void interlan_reset(struct net_device *dev)
 {
-	unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq));
+	unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq));
 	if (ei_debug > 1)
 		pr_info("Need to reset the NS8390 t=%lu...", jiffies);
 	ei_status.txing = 0;
@@ -661,54 +676,53 @@ static void interlan_reset(struct net_device *dev)
 
 /* dayna_memcpy_fromio/dayna_memcpy_toio */
 /* directly from daynaport.c by Alan Cox */
-static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count)
+static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from,
+				  int count)
 {
 	volatile unsigned char *ptr;
-	unsigned char *target=to;
-	from<<=1;	/* word, skip overhead */
-	ptr=(unsigned char *)(dev->mem_start+from);
+	unsigned char *target = to;
+	from <<= 1;	/* word, skip overhead */
+	ptr = (unsigned char *)(dev->mem_start+from);
 	/* Leading byte? */
-	if (from&2) {
+	if (from & 2) {
 		*target++ = ptr[-1];
 		ptr += 2;
 		count--;
 	}
-	while(count>=2)
-	{
+	while (count >= 2) {
 		*(unsigned short *)target = *(unsigned short volatile *)ptr;
 		ptr += 4;			/* skip cruft */
 		target += 2;
-		count-=2;
+		count -= 2;
 	}
 	/* Trailing byte? */
-	if(count)
+	if (count)
 		*target = *ptr;
 }
 
-static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count)
+static void dayna_memcpy_tocard(struct net_device *dev, int to,
+				const void *from, int count)
 {
 	volatile unsigned short *ptr;
-	const unsigned char *src=from;
-	to<<=1;	/* word, skip overhead */
-	ptr=(unsigned short *)(dev->mem_start+to);
+	const unsigned char *src = from;
+	to <<= 1;	/* word, skip overhead */
+	ptr = (unsigned short *)(dev->mem_start+to);
 	/* Leading byte? */
-	if (to&2) { /* avoid a byte write (stomps on other data) */
+	if (to & 2) {		/* avoid a byte write (stomps on other data) */
 		ptr[-1] = (ptr[-1]&0xFF00)|*src++;
 		ptr++;
 		count--;
 	}
-	while(count>=2)
-	{
-		*ptr++=*(unsigned short *)src;		/* Copy and */
+	while (count >= 2) {
+		*ptr++ = *(unsigned short *)src;	/* Copy and */
 		ptr++;			/* skip cruft */
 		src += 2;
-		count-=2;
+		count -= 2;
 	}
 	/* Trailing byte? */
-	if(count)
-	{
+	if (count) {
 		/* card doesn't like byte writes */
-		*ptr=(*ptr&0x00FF)|(*src << 8);
+		*ptr = (*ptr & 0x00FF) | (*src << 8);
 	}
 }
 
@@ -731,11 +745,14 @@ static void sane_block_input(struct net_device *dev, int count,
 	if (xfer_start + count > ei_status.rmem_end) {
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
-		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count);
+		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base,
+			      semi_count);
 		count -= semi_count;
-		memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count);
+		memcpy_toio(skb->data + semi_count,
+			    (char *)ei_status.rmem_start, count);
 	} else {
-		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count);
+		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base,
+			      count);
 	}
 }
 
@@ -748,16 +765,18 @@ static void sane_block_output(struct net_device *dev, int count,
 }
 
 /* dayna block input/output */
-static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+static void dayna_get_8390_hdr(struct net_device *dev,
+			       struct e8390_pkt_hdr *hdr, int ring_page)
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
 
 	dayna_memcpy_fromcard(dev, hdr, hdr_start, 4);
 	/* Fix endianness */
-	hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8);
+	hdr->count = (hdr->count & 0xFF) << 8 | (hdr->count >> 8);
 }
 
-static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+static void dayna_block_input(struct net_device *dev, int count,
+			      struct sk_buff *skb, int ring_offset)
 {
 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
 	unsigned long xfer_start = xfer_base+dev->mem_start;
@@ -765,8 +784,7 @@ static void dayna_block_input(struct net_device *dev, int count, struct sk_buff
 	/* Note the offset math is done in card memory space which is word
 	   per long onto our space. */
 
-	if (xfer_start + count > ei_status.rmem_end)
-	{
+	if (xfer_start + count > ei_status.rmem_end) {
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
 		dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count);
@@ -774,15 +792,14 @@ static void dayna_block_input(struct net_device *dev, int count, struct sk_buff
 		dayna_memcpy_fromcard(dev, skb->data + semi_count,
 				      ei_status.rmem_start - dev->mem_start,
 				      count);
-	}
-	else
-	{
+	} else {
 		dayna_memcpy_fromcard(dev, skb->data, xfer_base, count);
 	}
 }
 
-static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf,
-				int start_page)
+static void dayna_block_output(struct net_device *dev, int count,
+			       const unsigned char *buf,
+			       int start_page)
 {
 	long shmem = (start_page - WD_START_PG)<<8;
 
@@ -790,8 +807,9 @@ static void dayna_block_output(struct net_device *dev, int count, const unsigned
 }
 
 /* Cabletron block I/O */
-static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
-	int ring_page)
+static void slow_sane_get_8390_hdr(struct net_device *dev,
+				   struct e8390_pkt_hdr *hdr,
+				   int ring_page)
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
 	word_memcpy_fromcard(hdr, (char *)dev->mem_start + hdr_start, 4);
@@ -799,14 +817,13 @@ static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr
 	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
 }
 
-static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb,
-	int ring_offset)
+static void slow_sane_block_input(struct net_device *dev, int count,
+				  struct sk_buff *skb, int ring_offset)
 {
 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
 	unsigned long xfer_start = xfer_base+dev->mem_start;
 
-	if (xfer_start + count > ei_status.rmem_end)
-	{
+	if (xfer_start + count > ei_status.rmem_end) {
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
 		word_memcpy_fromcard(skb->data,
@@ -815,16 +832,14 @@ static void slow_sane_block_input(struct net_device *dev, int count, struct sk_b
 		count -= semi_count;
 		word_memcpy_fromcard(skb->data + semi_count,
 				     (char *)ei_status.rmem_start, count);
-	}
-	else
-	{
+	} else {
 		word_memcpy_fromcard(skb->data,
 				     (char *)dev->mem_start + xfer_base, count);
 	}
 }
 
-static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf,
-	int start_page)
+static void slow_sane_block_output(struct net_device *dev, int count,
+				   const unsigned char *buf, int start_page)
 {
 	long shmem = (start_page - WD_START_PG)<<8;
 
@@ -837,10 +852,10 @@ static void word_memcpy_tocard(void *tp, const void *fp, int count)
 	const unsigned short *from = fp;
 
 	count++;
-	count/=2;
+	count /= 2;
 
-	while(count--)
-		*to++=*from++;
+	while (count--)
+		*to++ = *from++;
 }
 
 static void word_memcpy_fromcard(void *tp, const void *fp, int count)
@@ -849,10 +864,10 @@ static void word_memcpy_fromcard(void *tp, const void *fp, int count)
 	const volatile unsigned short *from = fp;
 
 	count++;
-	count/=2;
+	count /= 2;
 
-	while(count--)
-		*to++=*from++;
+	while (count--)
+		*to++ = *from++;
 }
 
 
-- 
cgit v1.2.3


From f6de7acc42de909ccc7f00916ddb4d2064f42b67 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 4 Jan 2010 11:53:03 +0000
Subject: drivers/net/mac8390.c: Add mac8390_init function

Reduce indentation, make code a little neater.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mac8390.c | 207 +++++++++++++++++++++++++-------------------------
 1 file changed, 105 insertions(+), 102 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 8f168893caa9..c70bd6888c89 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -295,16 +295,114 @@ static int __init mac8390_memsize(unsigned long membase)
 	return i * 0x1000;
 }
 
+static bool __init mac8390_init(struct net_device *dev, struct nubus_dev *ndev,
+				enum mac8390_type cardtype)
+{
+	struct nubus_dir dir;
+	struct nubus_dirent ent;
+	int offset;
+	volatile unsigned short *i;
+
+	printk_once(KERN_INFO pr_fmt(version));
+
+	dev->irq = SLOT2IRQ(ndev->board->slot);
+	/* This is getting to be a habit */
+	dev->base_addr = (ndev->board->slot_addr |
+			  ((ndev->board->slot & 0xf) << 20));
+
+	/*
+	 * Get some Nubus info - we will trust the card's idea
+	 * of where its memory and registers are.
+	 */
+
+	if (nubus_get_func_dir(ndev, &dir) == -1) {
+		pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
+		       dev->name, ndev->board->slot);
+		return false;
+	}
+
+	/* Get the MAC address */
+	if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
+		pr_info("%s: Couldn't get MAC address!\n", dev->name);
+		return false;
+	}
+
+	nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
+
+	if (useresources[cardtype] == 1) {
+		nubus_rewinddir(&dir);
+		if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
+				    &ent) == -1) {
+			pr_err("%s: Memory offset resource for slot %X not found!\n",
+			       dev->name, ndev->board->slot);
+			return false;
+		}
+		nubus_get_rsrc_mem(&offset, &ent, 4);
+		dev->mem_start = dev->base_addr + offset;
+		/* yes, this is how the Apple driver does it */
+		dev->base_addr = dev->mem_start + 0x10000;
+		nubus_rewinddir(&dir);
+		if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
+				    &ent) == -1) {
+			pr_info("%s: Memory length resource for slot %X not found, probing\n",
+				dev->name, ndev->board->slot);
+			offset = mac8390_memsize(dev->mem_start);
+		} else {
+			nubus_get_rsrc_mem(&offset, &ent, 4);
+		}
+		dev->mem_end = dev->mem_start + offset;
+	} else {
+		switch (cardtype) {
+		case MAC8390_KINETICS:
+		case MAC8390_DAYNA: /* it's the same */
+			dev->base_addr = (int)(ndev->board->slot_addr +
+					       DAYNA_8390_BASE);
+			dev->mem_start = (int)(ndev->board->slot_addr +
+					       DAYNA_8390_MEM);
+			dev->mem_end = dev->mem_start +
+				       mac8390_memsize(dev->mem_start);
+			break;
+		case MAC8390_INTERLAN:
+			dev->base_addr = (int)(ndev->board->slot_addr +
+					       INTERLAN_8390_BASE);
+			dev->mem_start = (int)(ndev->board->slot_addr +
+					       INTERLAN_8390_MEM);
+			dev->mem_end = dev->mem_start +
+				       mac8390_memsize(dev->mem_start);
+			break;
+		case MAC8390_CABLETRON:
+			dev->base_addr = (int)(ndev->board->slot_addr +
+					       CABLETRON_8390_BASE);
+			dev->mem_start = (int)(ndev->board->slot_addr +
+					       CABLETRON_8390_MEM);
+			/* The base address is unreadable if 0x00
+			 * has been written to the command register
+			 * Reset the chip by writing E8390_NODMA +
+			 *   E8390_PAGE0 + E8390_STOP just to be
+			 *   sure
+			 */
+			i = (void *)dev->base_addr;
+			*i = 0x21;
+			dev->mem_end = dev->mem_start +
+				       mac8390_memsize(dev->mem_start);
+			break;
+
+		default:
+			pr_err("Card type %s is unsupported, sorry\n",
+			       ndev->board->name);
+			return false;
+		}
+	}
+
+	return true;
+}
+
 struct net_device * __init mac8390_probe(int unit)
 {
 	struct net_device *dev;
-	volatile unsigned short *i;
 	struct nubus_dev *ndev = NULL;
 	int err = -ENODEV;
 
-	struct nubus_dir dir;
-	struct nubus_dirent ent;
-	int offset;
 	static unsigned int slots;
 
 	enum mac8390_type cardtype;
@@ -324,111 +422,16 @@ struct net_device * __init mac8390_probe(int unit)
 	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET,
 				       ndev))) {
 		/* Have we seen it already? */
-		if (slots & (1<<ndev->board->slot))
+		if (slots & (1 << ndev->board->slot))
 			continue;
-		slots |= 1<<ndev->board->slot;
+		slots |= 1 << ndev->board->slot;
 
 		cardtype = mac8390_ident(ndev);
 		if (cardtype == MAC8390_NONE)
 			continue;
 
-		printk_once(KERN_INFO pr_fmt(version));
-
-		dev->irq = SLOT2IRQ(ndev->board->slot);
-		/* This is getting to be a habit */
-		dev->base_addr = (ndev->board->slot_addr |
-				  ((ndev->board->slot & 0xf) << 20));
-
-		/* Get some Nubus info - we will trust the card's idea
-		   of where its memory and registers are. */
-
-		if (nubus_get_func_dir(ndev, &dir) == -1) {
-			pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
-			       dev->name, ndev->board->slot);
-			continue;
-		}
-
-		/* Get the MAC address */
-		if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
-			pr_info("%s: Couldn't get MAC address!\n", dev->name);
+		if (!mac8390_init(dev, ndev, cardtype))
 			continue;
-		} else {
-			nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
-		}
-
-		if (useresources[cardtype] == 1) {
-			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
-					    &ent) == -1) {
-				pr_err("%s: Memory offset resource for slot %X not found!\n",
-				       dev->name, ndev->board->slot);
-				continue;
-			}
-			nubus_get_rsrc_mem(&offset, &ent, 4);
-			dev->mem_start = dev->base_addr + offset;
-			/* yes, this is how the Apple driver does it */
-			dev->base_addr = dev->mem_start + 0x10000;
-			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
-					    &ent) == -1) {
-				pr_info("%s: Memory length resource for slot %X not found, probing\n",
-					dev->name, ndev->board->slot);
-				offset = mac8390_memsize(dev->mem_start);
-				} else {
-					nubus_get_rsrc_mem(&offset, &ent, 4);
-				}
-			dev->mem_end = dev->mem_start + offset;
-		} else {
-			switch (cardtype) {
-			case MAC8390_KINETICS:
-			case MAC8390_DAYNA: /* it's the same */
-				dev->base_addr =
-					(int)(ndev->board->slot_addr +
-					      DAYNA_8390_BASE);
-				dev->mem_start =
-					(int)(ndev->board->slot_addr +
-					      DAYNA_8390_MEM);
-				dev->mem_end =
-					dev->mem_start +
-					mac8390_memsize(dev->mem_start);
-				break;
-			case MAC8390_INTERLAN:
-				dev->base_addr =
-					(int)(ndev->board->slot_addr +
-					      INTERLAN_8390_BASE);
-				dev->mem_start =
-					(int)(ndev->board->slot_addr +
-					      INTERLAN_8390_MEM);
-				dev->mem_end =
-					dev->mem_start +
-					mac8390_memsize(dev->mem_start);
-				break;
-			case MAC8390_CABLETRON:
-				dev->base_addr =
-					(int)(ndev->board->slot_addr +
-					      CABLETRON_8390_BASE);
-				dev->mem_start =
-					(int)(ndev->board->slot_addr +
-					      CABLETRON_8390_MEM);
-				/* The base address is unreadable if 0x00
-				 * has been written to the command register
-				 * Reset the chip by writing E8390_NODMA +
-				 *   E8390_PAGE0 + E8390_STOP just to be
-				 *   sure
-				 */
-				i = (void *)dev->base_addr;
-				*i = 0x21;
-				dev->mem_end =
-					dev->mem_start +
-					mac8390_memsize(dev->mem_start);
-				break;
-
-			default:
-				pr_err("Card type %s is unsupported, sorry\n",
-				       ndev->board->name);
-				continue;
-			}
-		}
 
 		/* Do the nasty 8390 stuff */
 		if (!mac8390_initdev(dev, ndev, cardtype))
-- 
cgit v1.2.3


From d160439e7753aa19092bb12d8f4c6c918f8267e0 Mon Sep 17 00:00:00 2001
From: Márton Németh <nm127@freemail.hu>
Date: Mon, 4 Jan 2010 13:03:02 +0000
Subject: 8139too: make PCI device ids constant
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make pci_device_id also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/8139too.c      | 2 +-
 drivers/net/pci-skeleton.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 25f7339daabd..907f2d583db8 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -231,7 +231,7 @@ static const struct {
 };
 
 
-static struct pci_device_id rtl8139_pci_tbl[] = {
+static const struct pci_device_id rtl8139_pci_tbl[] = {
 	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 480af402affd..8ff5536a3757 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -211,7 +211,7 @@ static struct {
 };
 
 
-static struct pci_device_id netdrv_pci_tbl[] = {
+static const struct pci_device_id netdrv_pci_tbl[] = {
 	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
 	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
-- 
cgit v1.2.3


From ce7194d889996fb8f724148bc85a0c2c79da7b8e Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 06:56:52 +0000
Subject: drivers/net/ixgbe/ixgbe_common.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_common.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 688b8ca5da32..1cedb9af63dc 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1278,19 +1278,11 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
 		/* Get the MAC address from the RAR0 for later reference */
 		hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
 
-		hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
-		       hw->mac.addr[0], hw->mac.addr[1],
-		       hw->mac.addr[2]);
-		hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
-		       hw->mac.addr[4], hw->mac.addr[5]);
+		hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr);
 	} else {
 		/* Setup the receive address. */
 		hw_dbg(hw, "Overriding MAC Address in RAR[0]\n");
-		hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ",
-		       hw->mac.addr[0], hw->mac.addr[1],
-		       hw->mac.addr[2]);
-		hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
-		       hw->mac.addr[4], hw->mac.addr[5]);
+		hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr);
 
 		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
 	}
-- 
cgit v1.2.3


From bf54e73691158a634ff72ebc139f38c4fa7b83f0 Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 06:59:23 +0000
Subject: drivers/net/vxge/vxge-main.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vxge/vxge-main.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index f1c4b2a1e867..5f0e7ea0d493 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -4297,10 +4297,8 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 	vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter",
 		vdev->ndev->name, ll_config.device_hw_info.product_desc);
 
-	vxge_debug_init(VXGE_TRACE,
-		"%s: MAC ADDR: %02X:%02X:%02X:%02X:%02X:%02X",
-		vdev->ndev->name, macaddr[0], macaddr[1], macaddr[2],
-		macaddr[3], macaddr[4], macaddr[5]);
+	vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM",
+		vdev->ndev->name, macaddr);
 
 	vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d",
 		vdev->ndev->name, vxge_hw_device_link_width_get(hldev));
-- 
cgit v1.2.3


From 829911725f4bb72c30480aab756704d588c7cd1e Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 06:54:01 +0000
Subject: drivers/net/atl1c/atl1c_main.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/atl1c/atl1c_main.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 2f4be59b9c0b..77cde859620c 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -2596,11 +2596,8 @@ static int __devinit atl1c_probe(struct pci_dev *pdev,
 	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
 	if (netif_msg_probe(adapter))
-		dev_dbg(&pdev->dev,
-			"mac address : %02x-%02x-%02x-%02x-%02x-%02x\n",
-			adapter->hw.mac_addr[0], adapter->hw.mac_addr[1],
-			adapter->hw.mac_addr[2], adapter->hw.mac_addr[3],
-			adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]);
+		dev_dbg(&pdev->dev, "mac address : %pM\n",
+			adapter->hw.mac_addr);
 
 	atl1c_hw_set_mac_addr(&adapter->hw);
 	INIT_WORK(&adapter->common_task, atl1c_common_task);
-- 
cgit v1.2.3


From 595acf270e098ee3af92890253c5db41bc85de88 Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 07:01:54 +0000
Subject: drivers/net/wimax/i2400m/fw.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wimax/i2400m/fw.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 64cdfeb299ca..e803a7dc6502 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -1041,21 +1041,14 @@ int i2400m_read_mac_addr(struct i2400m *i2400m)
 		dev_err(dev, "BM: read mac addr failed: %d\n", result);
 		goto error_read_mac;
 	}
-	d_printf(2, dev,
-		 "mac addr is %02x:%02x:%02x:%02x:%02x:%02x\n",
-		 ack_buf.ack_pl[0], ack_buf.ack_pl[1],
-		 ack_buf.ack_pl[2], ack_buf.ack_pl[3],
-		 ack_buf.ack_pl[4], ack_buf.ack_pl[5]);
+	d_printf(2, dev, "mac addr is %pM\n", ack_buf.ack_pl);
 	if (i2400m->bus_bm_mac_addr_impaired == 1) {
 		ack_buf.ack_pl[0] = 0x00;
 		ack_buf.ack_pl[1] = 0x16;
 		ack_buf.ack_pl[2] = 0xd3;
 		get_random_bytes(&ack_buf.ack_pl[3], 3);
 		dev_err(dev, "BM is MAC addr impaired, faking MAC addr to "
-			"mac addr is %02x:%02x:%02x:%02x:%02x:%02x\n",
-			ack_buf.ack_pl[0], ack_buf.ack_pl[1],
-			ack_buf.ack_pl[2], ack_buf.ack_pl[3],
-			ack_buf.ack_pl[4], ack_buf.ack_pl[5]);
+			"mac addr is %pM\n", ack_buf.ack_pl);
 		result = 0;
 	}
 	net_dev->addr_len = ETH_ALEN;
-- 
cgit v1.2.3


From 1b8e664d34f2f551fd6c2d40033d29c13551292c Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 06:55:40 +0000
Subject: drivers/net/atl1e/atl1e_main.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/atl1e/atl1e_main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 08f8c0969e9b..2080d444068b 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -2378,10 +2378,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
 
 	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
-	dev_dbg(&pdev->dev, "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n",
-			adapter->hw.mac_addr[0], adapter->hw.mac_addr[1],
-			adapter->hw.mac_addr[2], adapter->hw.mac_addr[3],
-			adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]);
+	dev_dbg(&pdev->dev, "mac address : %pM\n", adapter->hw.mac_addr);
 
 	INIT_WORK(&adapter->reset_task, atl1e_reset_task);
 	INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
-- 
cgit v1.2.3


From fcb635e8c6d68bf06531603a1caa6e59ba7e356d Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 06:58:12 +0000
Subject: drivers/net/qlge/qlge_main.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index e9d6481ed9eb..25561fbdb203 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -452,9 +452,7 @@ static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
 	if (set) {
 		addr = &qdev->ndev->dev_addr[0];
 		QPRINTK(qdev, IFUP, DEBUG,
-			"Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
-			addr[0], addr[1], addr[2], addr[3],
-			addr[4], addr[5]);
+			"Set Mac addr %pM\n", addr);
 	} else {
 		memset(zero_mac_addr, 0, ETH_ALEN);
 		addr = &zero_mac_addr[0];
-- 
cgit v1.2.3


From 4754b3de93f893e85d811031ff742fc7a4f53db4 Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Tue, 5 Jan 2010 07:00:57 +0000
Subject: drivers/net/wimax/i2400m/driver.c: use %pM to show MAC address

Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wimax/i2400m/driver.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 96a615fe09de..6cead321bc15 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -301,24 +301,15 @@ int i2400m_check_mac_addr(struct i2400m *i2400m)
 	/* Extract MAC addresss */
 	ddi = (void *) skb->data;
 	BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
-	d_printf(2, dev, "GET DEVICE INFO: mac addr "
-		 "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		 ddi->mac_address[0], ddi->mac_address[1],
-		 ddi->mac_address[2], ddi->mac_address[3],
-		 ddi->mac_address[4], ddi->mac_address[5]);
+	d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
+		 ddi->mac_address);
 	if (!memcmp(net_dev->perm_addr, ddi->mac_address,
 		   sizeof(ddi->mac_address)))
 		goto ok;
 	dev_warn(dev, "warning: device reports a different MAC address "
 		 "to that of boot mode's\n");
-	dev_warn(dev, "device reports     %02x:%02x:%02x:%02x:%02x:%02x\n",
-		 ddi->mac_address[0], ddi->mac_address[1],
-		 ddi->mac_address[2], ddi->mac_address[3],
-		 ddi->mac_address[4], ddi->mac_address[5]);
-	dev_warn(dev, "boot mode reported %02x:%02x:%02x:%02x:%02x:%02x\n",
-		 net_dev->perm_addr[0], net_dev->perm_addr[1],
-		 net_dev->perm_addr[2], net_dev->perm_addr[3],
-		 net_dev->perm_addr[4], net_dev->perm_addr[5]);
+	dev_warn(dev, "device reports     %pM\n", ddi->mac_address);
+	dev_warn(dev, "boot mode reported %pM\n", net_dev->perm_addr);
 	if (!memcmp(zeromac, ddi->mac_address, sizeof(zeromac)))
 		dev_err(dev, "device reports an invalid MAC address, "
 			"not updating\n");
-- 
cgit v1.2.3


From 69d279eaf8f23c7d7cfc0e879c629a92bfc3e3e0 Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Thu, 7 Jan 2010 13:24:19 +0000
Subject: drivers/net/defxx.c: use %pMF to show MAC address

Use the %pMF kernel extension to display the MAC address.

The address will still be displayed in the FDDI Canonical format.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/defxx.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 6a6ea038d7a3..e4eac4bcdf83 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -1052,12 +1052,9 @@ static int __devinit dfx_driver_init(struct net_device *dev,
 		board_name = "DEFEA";
 	if (dfx_bus_pci)
 		board_name = "DEFPA";
-	pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, "
-		"Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+	pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
 		print_name, board_name, dfx_use_mmio ? "" : "I/O ",
-		(long long)bar_start, dev->irq,
-		dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-		dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+		(long long)bar_start, dev->irq, dev->dev_addr);
 
 	/*
 	 * Get memory for descriptor block, consumer block, and other buffers
-- 
cgit v1.2.3


From 596a530bb3af746d33ea2910a0569b9825279979 Mon Sep 17 00:00:00 2001
From: hartleys <hartleys@visionengravers.com>
Date: Thu, 7 Jan 2010 13:27:46 +0000
Subject: drivers/net/skfp/skfddi.c: use %pMF to show MAC address

Use the %pMF kernel extension to display the MAC address.

The address will still be displayed in the FDDI Canonical format.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/skfp/skfddi.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index db216a728503..1f9698c0fb64 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -435,13 +435,7 @@ static  int skfp_driver_init(struct net_device *dev)
 		goto fail;
 	}
 	read_address(smc, NULL);
-	pr_debug(KERN_INFO "HW-Addr: %02x %02x %02x %02x %02x %02x\n",
-	       smc->hw.fddi_canon_addr.a[0],
-	       smc->hw.fddi_canon_addr.a[1],
-	       smc->hw.fddi_canon_addr.a[2],
-	       smc->hw.fddi_canon_addr.a[3],
-	       smc->hw.fddi_canon_addr.a[4],
-	       smc->hw.fddi_canon_addr.a[5]);
+	pr_debug(KERN_INFO "HW-Addr: %pMF\n", smc->hw.fddi_canon_addr.a);
 	memcpy(dev->dev_addr, smc->hw.fddi_canon_addr.a, 6);
 
 	smt_reset_defaults(smc, 0);
@@ -890,15 +884,8 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 							  (struct fddi_addr *)dmi->dmi_addr, 
 							  1);
 
-					pr_debug(KERN_INFO "ENABLE MC ADDRESS:");
-					pr_debug(" %02x %02x %02x ",
-					       dmi->dmi_addr[0],
-					       dmi->dmi_addr[1],
-					       dmi->dmi_addr[2]);
-					pr_debug("%02x %02x %02x\n",
-					       dmi->dmi_addr[3],
-					       dmi->dmi_addr[4],
-					       dmi->dmi_addr[5]);
+					pr_debug(KERN_INFO "ENABLE MC ADDRESS: %pMF\n",
+						dmi->dmi_addr);
 					dmi = dmi->next;
 				}	// for
 
-- 
cgit v1.2.3


From 109cdd66485b639b2fbfcbf59ae7ef1286520705 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:11 +0000
Subject: stmmac: use MII_BUS_ID_SIZE instead of BUS_ID_SIZE

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac_main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 508fba8fa07f..79a938117878 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -305,8 +305,8 @@ static int stmmac_init_phy(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev;
-	char phy_id[BUS_ID_SIZE];	/* PHY to connect */
-	char bus_id[BUS_ID_SIZE];
+	char phy_id[MII_BUS_ID_SIZE + 3];
+	char bus_id[MII_BUS_ID_SIZE];
 
 	priv->oldlink = 0;
 	priv->speed = 0;
@@ -318,7 +318,8 @@ static int stmmac_init_phy(struct net_device *dev)
 	}
 
 	snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
-	snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr);
+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+		 priv->phy_addr);
 	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id);
 
 	phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0,
-- 
cgit v1.2.3


From 609634799eba48bb9e80ce56dfd87930f17bf6fa Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:12 +0000
Subject: stmmac: convert unicast addr list to list_head

This patch converts unicast address list to standard list_head using
previously introduced struct netdev_hw_addr.

Note: this patch also removes a debug printk used for displaying the
mac addresses. Indeed, it's is possible to dump the registers with
ethtool.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/gmac.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index 52586ee68953..982875646725 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -435,7 +435,7 @@ static void gmac_set_filter(struct net_device *dev)
 	unsigned int value = 0;
 
 	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
-	    __func__, dev->mc_count, dev->uc_count);
+	    __func__, dev->mc_count, dev->uc.count);
 
 	if (dev->flags & IFF_PROMISC)
 		value = GMAC_FRAME_FILTER_PR;
@@ -469,25 +469,17 @@ static void gmac_set_filter(struct net_device *dev)
 	}
 
 	/* Handle multiple unicast addresses (perfect filtering)*/
-	if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES)
+	if (dev->uc.count > GMAC_MAX_UNICAST_ADDRESSES)
 		/* Switch to promiscuous mode is more than 16 addrs
 		   are required */
 		value |= GMAC_FRAME_FILTER_PR;
 	else {
-		int i;
-		struct dev_addr_list *uc_ptr = dev->uc_list;
-
-			for (i = 0; i < dev->uc_count; i++) {
-				gmac_set_umac_addr(ioaddr, uc_ptr->da_addr,
-						i + 1);
-
-				DBG(KERN_INFO "\t%d "
-				"- Unicast addr %02x:%02x:%02x:%02x:%02x:"
-				"%02x\n", i + 1,
-				uc_ptr->da_addr[0], uc_ptr->da_addr[1],
-				uc_ptr->da_addr[2], uc_ptr->da_addr[3],
-				uc_ptr->da_addr[4], uc_ptr->da_addr[5]);
-				uc_ptr = uc_ptr->next;
+		int reg = 1;
+		struct netdev_hw_addr *ha;
+
+		list_for_each_entry(ha, &dev->uc.list, list) {
+			gmac_set_umac_addr(ioaddr, ha->addr, reg);
+			reg++;
 		}
 	}
 
-- 
cgit v1.2.3


From ee7946a77858f417227cf57cd647729d0dd75761 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:14 +0000
Subject: stmmac: rewiew platform data

This patch rewiews and reorganises all the data
come from the platform removing any dependency
from the stm code.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac.h      | 24 ++++++++++++++++++++++++
 drivers/net/stmmac/stmmac_main.c | 16 +++++++++-------
 2 files changed, 33 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 6d2eae3040e5..0d5529fa579a 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -21,6 +21,7 @@
 *******************************************************************************/
 
 #define DRV_MODULE_VERSION	"Oct_09"
+#include <linux/stmmac.h>
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define STMMAC_VLAN_TAG_USED
@@ -69,6 +70,7 @@ struct stmmac_priv {
 	int phy_mask;
 	int (*phy_reset) (void *priv);
 	void (*fix_mac_speed) (void *priv, unsigned int speed);
+	void (*bus_setup)(unsigned long ioaddr);
 	void *bsp_priv;
 
 	int phy_irq;
@@ -93,6 +95,28 @@ struct stmmac_priv {
 #endif
 };
 
+#ifdef CONFIG_STM_DRIVERS
+#include <linux/stm/pad.h>
+static inline int stmmac_claim_resource(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct plat_stmmacenet_data *plat_dat = pdev->dev.platform_data;
+
+	/* Pad routing setup */
+	if (IS_ERR(devm_stm_pad_claim(&pdev->dev, plat_dat->pad_config,
+			dev_name(&pdev->dev)))) {
+		printk(KERN_ERR "%s: Failed to request pads!\n", __func__);
+		ret = -ENODEV;
+	}
+	return ret;
+}
+#else
+static inline int stmmac_claim_resource(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 extern int stmmac_mdio_unregister(struct net_device *ndev);
 extern int stmmac_mdio_register(struct net_device *ndev);
 extern void stmmac_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 79a938117878..d50fe6f171ef 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -45,7 +45,6 @@
 #include <linux/phy.h>
 #include <linux/if_vlan.h>
 #include <linux/dma-mapping.h>
-#include <linux/stm/soc.h>
 #include "stmmac.h"
 
 #define STMMAC_RESOURCE_NAME	"stmmaceth"
@@ -1798,8 +1797,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 
 static int stmmacphy_dvr_probe(struct platform_device *pdev)
 {
-	struct plat_stmmacphy_data *plat_dat;
-	plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data);
+	struct plat_stmmacphy_data *plat_dat = pdev->dev.platform_data;
 
 	pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
 	       plat_dat->bus_id);
@@ -1831,9 +1829,7 @@ static struct platform_driver stmmacphy_driver = {
 static int stmmac_associate_phy(struct device *dev, void *data)
 {
 	struct stmmac_priv *priv = (struct stmmac_priv *)data;
-	struct plat_stmmacphy_data *plat_dat;
-
-	plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data);
+	struct plat_stmmacphy_data *plat_dat = dev->platform_data;
 
 	DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
 		plat_dat->bus_id);
@@ -1923,7 +1919,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	priv = netdev_priv(ndev);
 	priv->device = &(pdev->dev);
 	priv->dev = ndev;
-	plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data);
+	plat_dat = pdev->dev.platform_data;
 	priv->bus_id = plat_dat->bus_id;
 	priv->pbl = plat_dat->pbl;	/* TLI */
 	priv->is_gmac = plat_dat->has_gmac;	/* GMAC is on board */
@@ -1933,6 +1929,11 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	/* Set the I/O base addr */
 	ndev->base_addr = (unsigned long)addr;
 
+	/* Verify embedded resource for the platform */
+	ret = stmmac_claim_resource(pdev);
+	if (ret < 0)
+		goto out;
+
 	/* MAC HW revice detection */
 	ret = stmmac_mac_device_setup(ndev);
 	if (ret < 0)
@@ -1953,6 +1954,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	}
 
 	priv->fix_mac_speed = plat_dat->fix_mac_speed;
+	priv->bus_setup = plat_dat->bus_setup;
 	priv->bsp_priv = plat_dat->bsp_priv;
 
 	pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
-- 
cgit v1.2.3


From ca5f12c1a82cf72ce73617dfc8ef56faf6fec30a Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:15 +0000
Subject: stmmac: perform hw bus configuration

On some platforms it can be required a different
configuration of the bus. This can be done
by invoking the bus_setup. It is defined
for all the platforms that needs this kind of
configuration.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/gmac.c        | 3 ---
 drivers/net/stmmac/stmmac_main.c | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index 982875646725..c1278876ef25 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -400,9 +400,6 @@ static void gmac_core_init(unsigned long ioaddr)
 	value |= GMAC_CORE_INIT;
 	writel(value, ioaddr + GMAC_CONTROL);
 
-	/* STBus Bridge Configuration */
-	/*writel(0xc5608, ioaddr + 0x00007000);*/
-
 	/* Freeze MMC counters */
 	writel(0x8, ioaddr + GMAC_MMC_CTRL);
 	/* Mask GMAC interrupts */
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index d50fe6f171ef..a02006d57a59 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1067,6 +1067,9 @@ static int stmmac_open(struct net_device *dev)
 
 	/* Copy the MAC addr into the HW  */
 	priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0);
+	/* If required, perform hw setup of the bus. */
+	if (priv->bus_setup)
+		priv->bus_setup(ioaddr);
 	/* Initialize the MAC Core */
 	priv->mac_type->ops->core_init(ioaddr);
 
-- 
cgit v1.2.3


From 65818fa744e70a58d230083dda1f1cd8e5c5e2ee Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:16 +0000
Subject: stmmac: do not call fix_mac_speed if NULL

On some platforms, fix_mac_speed is used for
configuring some sysconf registers according
to the working speed.
This patch fixes the fix_mac_speed invocation
that cannot be done if it is a NULL pointer.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index a02006d57a59..82ebbc0c8839 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -258,8 +258,9 @@ static void stmmac_adjust_link(struct net_device *dev)
 				} else {
 					ctrl &= ~priv->mac_type->hw.link.port;
 				}
-				priv->fix_mac_speed(priv->bsp_priv,
-						    phydev->speed);
+				if (likely(priv->fix_mac_speed))
+					priv->fix_mac_speed(priv->bsp_priv,
+							    phydev->speed);
 				break;
 			default:
 				if (netif_msg_link(priv))
-- 
cgit v1.2.3


From db98a0b001df79ffcdd4f231c3516411786a1113 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:17 +0000
Subject: stmmac: reorganise class operations.

This patch reorganises the internal stmmac ops structure.
The stmmac_ops has been splitted into other three structures named:
 stmmac_ops
 stmmac_dma_ops
 stmmac_desc_ops

This makes the code more clear and also helps the next work to
make the driver more generic.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/common.h         |  64 +++++++++--------
 drivers/net/stmmac/gmac.c           |  43 ++++++-----
 drivers/net/stmmac/mac100.c         |  43 ++++++-----
 drivers/net/stmmac/stmmac.h         |   2 +-
 drivers/net/stmmac/stmmac_ethtool.c |   8 +--
 drivers/net/stmmac/stmmac_main.c    | 138 +++++++++++++++++-------------------
 drivers/net/stmmac/stmmac_mdio.c    |  10 +--
 7 files changed, 162 insertions(+), 146 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index e49e5188e887..95782ccf44b4 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -239,25 +239,11 @@ static inline void stmmac_get_mac_addr(unsigned long ioaddr,
 	return;
 }
 
-struct stmmac_ops {
-	/* MAC core initialization */
-	void (*core_init) (unsigned long ioaddr) ____cacheline_aligned;
-	/* DMA core initialization */
-	int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx);
-	/* Dump MAC registers */
-	void (*dump_mac_regs) (unsigned long ioaddr);
-	/* Dump DMA registers */
-	void (*dump_dma_regs) (unsigned long ioaddr);
-	/* Set tx/rx threshold in the csr6 register
-	 * An invalid value enables the store-and-forward mode */
-	void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode);
-	/* To track extra statistic (if supported) */
-	void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
-				   unsigned long ioaddr);
-	/* RX descriptor ring initialization */
+struct stmmac_desc_ops {
+	/* DMA RX descriptor ring initialization */
 	void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size,
-				int disable_rx_ic);
-	/* TX descriptor ring initialization */
+			      int disable_rx_ic);
+	/* DMA TX descriptor ring initialization */
 	void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size);
 
 	/* Invoked by the xmit function to prepare the tx descriptor */
@@ -281,7 +267,6 @@ struct stmmac_ops {
 	/* Get the buffer size from the descriptor */
 	int (*get_tx_len) (struct dma_desc *p);
 	/* Handle extra events on specific interrupts hw dependent */
-	void (*host_irq_status) (unsigned long ioaddr);
 	int (*get_rx_owner) (struct dma_desc *p);
 	void (*set_rx_owner) (struct dma_desc *p);
 	/* Get the receive frame size */
@@ -289,6 +274,28 @@ struct stmmac_ops {
 	/* Return the reception status looking at the RDES1 */
 	int (*rx_status) (void *data, struct stmmac_extra_stats *x,
 			  struct dma_desc *p);
+};
+
+struct stmmac_dma_ops {
+	/* DMA core initialization */
+	int (*init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx);
+	/* Dump DMA registers */
+	void (*dump_regs) (unsigned long ioaddr);
+	/* Set tx/rx threshold in the csr6 register
+	 * An invalid value enables the store-and-forward mode */
+	void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode);
+	/* To track extra statistic (if supported) */
+	void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
+				   unsigned long ioaddr);
+};
+
+struct stmmac_ops {
+	/* MAC core initialization */
+	void (*core_init) (unsigned long ioaddr) ____cacheline_aligned;
+	/* Dump MAC registers */
+	void (*dump_regs) (unsigned long ioaddr);
+	/* Handle extra events on specific interrupts hw dependent */
+	void (*host_irq_status) (unsigned long ioaddr);
 	/* Multicast filter setting */
 	void (*set_filter) (struct net_device *dev);
 	/* Flow control setting */
@@ -298,9 +305,9 @@ struct stmmac_ops {
 	void (*pmt) (unsigned long ioaddr, unsigned long mode);
 	/* Set/Get Unicast MAC addresses */
 	void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr,
-			     unsigned int reg_n);
+			       unsigned int reg_n);
 	void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr,
-			     unsigned int reg_n);
+			       unsigned int reg_n);
 };
 
 struct mac_link {
@@ -314,16 +321,13 @@ struct mii_regs {
 	unsigned int data;	/* MII Data */
 };
 
-struct hw_cap {
-	unsigned int version;	/* Core Version register (GMAC) */
-	unsigned int pmt;	/* Power-Down mode (GMAC) */
-	struct mac_link link;
-	struct mii_regs mii;
-};
-
 struct mac_device_info {
-	struct hw_cap hw;
-	struct stmmac_ops *ops;
+	struct stmmac_ops	*mac;
+	struct stmmac_desc_ops	*desc;
+	struct stmmac_dma_ops	*dma;
+	unsigned int pmt;	/* support Power-Down */
+	struct mii_regs mii;	/* MII register Addresses */
+	struct mac_link link;
 };
 
 struct mac_device_info *gmac_setup(unsigned long addr);
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index c1278876ef25..cf199d969227 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -630,19 +630,28 @@ static int gmac_get_rx_frame_len(struct dma_desc *p)
 	return p->des01.erx.frame_length;
 }
 
-struct stmmac_ops gmac_driver = {
+struct stmmac_ops gmac_ops = {
 	.core_init = gmac_core_init,
-	.dump_mac_regs = gmac_dump_regs,
-	.dma_init = gmac_dma_init,
-	.dump_dma_regs = gmac_dump_dma_regs,
+	.dump_regs = gmac_dump_regs,
+	.host_irq_status = gmac_irq_status,
+	.set_filter = gmac_set_filter,
+	.flow_ctrl = gmac_flow_ctrl,
+	.pmt = gmac_pmt,
+	.set_umac_addr = gmac_set_umac_addr,
+	.get_umac_addr = gmac_get_umac_addr,
+};
+
+struct stmmac_dma_ops gmac_dma_ops = {
+	.init = gmac_dma_init,
+	.dump_regs = gmac_dump_dma_regs,
 	.dma_mode = gmac_dma_operation_mode,
 	.dma_diagnostic_fr = gmac_dma_diagnostic_fr,
+};
+
+struct stmmac_desc_ops gmac_desc_ops = {
 	.tx_status = gmac_get_tx_frame_status,
 	.rx_status = gmac_get_rx_frame_status,
 	.get_tx_len = gmac_get_tx_len,
-	.set_filter = gmac_set_filter,
-	.flow_ctrl = gmac_flow_ctrl,
-	.pmt = gmac_pmt,
 	.init_rx_desc = gmac_init_rx_desc,
 	.init_tx_desc = gmac_init_tx_desc,
 	.get_tx_owner = gmac_get_tx_owner,
@@ -655,9 +664,6 @@ struct stmmac_ops gmac_driver = {
 	.set_tx_owner = gmac_set_tx_owner,
 	.set_rx_owner = gmac_set_rx_owner,
 	.get_rx_frame_len = gmac_get_rx_frame_len,
-	.host_irq_status = gmac_irq_status,
-	.set_umac_addr = gmac_set_umac_addr,
-	.get_umac_addr = gmac_get_umac_addr,
 };
 
 struct mac_device_info *gmac_setup(unsigned long ioaddr)
@@ -670,13 +676,16 @@ struct mac_device_info *gmac_setup(unsigned long ioaddr)
 
 	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
 
-	mac->ops = &gmac_driver;
-	mac->hw.pmt = PMT_SUPPORTED;
-	mac->hw.link.port = GMAC_CONTROL_PS;
-	mac->hw.link.duplex = GMAC_CONTROL_DM;
-	mac->hw.link.speed = GMAC_CONTROL_FES;
-	mac->hw.mii.addr = GMAC_MII_ADDR;
-	mac->hw.mii.data = GMAC_MII_DATA;
+	mac->mac = &gmac_ops;
+	mac->desc = &gmac_desc_ops;
+	mac->dma = &gmac_dma_ops;
+
+	mac->pmt = PMT_SUPPORTED;
+	mac->link.port = GMAC_CONTROL_PS;
+	mac->link.duplex = GMAC_CONTROL_DM;
+	mac->link.speed = GMAC_CONTROL_FES;
+	mac->mii.addr = GMAC_MII_ADDR;
+	mac->mii.data = GMAC_MII_DATA;
 
 	return mac;
 }
diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c
index 625171b6062b..45d0457ddb6e 100644
--- a/drivers/net/stmmac/mac100.c
+++ b/drivers/net/stmmac/mac100.c
@@ -467,19 +467,28 @@ static int mac100_get_rx_frame_len(struct dma_desc *p)
 	return p->des01.rx.frame_length;
 }
 
-struct stmmac_ops mac100_driver = {
+struct stmmac_ops mac100_ops = {
 	.core_init = mac100_core_init,
-	.dump_mac_regs = mac100_dump_mac_regs,
-	.dma_init = mac100_dma_init,
-	.dump_dma_regs = mac100_dump_dma_regs,
+	.dump_regs = mac100_dump_mac_regs,
+	.host_irq_status = mac100_irq_status,
+	.set_filter = mac100_set_filter,
+	.flow_ctrl = mac100_flow_ctrl,
+	.pmt = mac100_pmt,
+	.set_umac_addr = mac100_set_umac_addr,
+	.get_umac_addr = mac100_get_umac_addr,
+};
+
+struct stmmac_dma_ops mac100_dma_ops = {
+	.init = mac100_dma_init,
+	.dump_regs = mac100_dump_dma_regs,
 	.dma_mode = mac100_dma_operation_mode,
 	.dma_diagnostic_fr = mac100_dma_diagnostic_fr,
+};
+
+struct stmmac_desc_ops mac100_desc_ops = {
 	.tx_status = mac100_get_tx_frame_status,
 	.rx_status = mac100_get_rx_frame_status,
 	.get_tx_len = mac100_get_tx_len,
-	.set_filter = mac100_set_filter,
-	.flow_ctrl = mac100_flow_ctrl,
-	.pmt = mac100_pmt,
 	.init_rx_desc = mac100_init_rx_desc,
 	.init_tx_desc = mac100_init_tx_desc,
 	.get_tx_owner = mac100_get_tx_owner,
@@ -492,9 +501,6 @@ struct stmmac_ops mac100_driver = {
 	.set_tx_owner = mac100_set_tx_owner,
 	.set_rx_owner = mac100_set_rx_owner,
 	.get_rx_frame_len = mac100_get_rx_frame_len,
-	.host_irq_status = mac100_irq_status,
-	.set_umac_addr = mac100_set_umac_addr,
-	.get_umac_addr = mac100_get_umac_addr,
 };
 
 struct mac_device_info *mac100_setup(unsigned long ioaddr)
@@ -505,13 +511,16 @@ struct mac_device_info *mac100_setup(unsigned long ioaddr)
 
 	pr_info("\tMAC 10/100\n");
 
-	mac->ops = &mac100_driver;
-	mac->hw.pmt = PMT_NOT_SUPPORTED;
-	mac->hw.link.port = MAC_CONTROL_PS;
-	mac->hw.link.duplex = MAC_CONTROL_F;
-	mac->hw.link.speed = 0;
-	mac->hw.mii.addr = MAC_MII_ADDR;
-	mac->hw.mii.data = MAC_MII_DATA;
+	mac->mac = &mac100_ops;
+	mac->desc = &mac100_desc_ops;
+	mac->dma = &mac100_dma_ops;
+
+	mac->pmt = PMT_NOT_SUPPORTED;
+	mac->link.port = MAC_CONTROL_PS;
+	mac->link.duplex = MAC_CONTROL_F;
+	mac->link.speed = 0;
+	mac->mii.addr = MAC_MII_ADDR;
+	mac->mii.data = MAC_MII_DATA;
 
 	return mac;
 }
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 0d5529fa579a..44421d9667a8 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -58,7 +58,7 @@ struct stmmac_priv {
 	int rx_csum;
 	unsigned int dma_buf_sz;
 	struct device *device;
-	struct mac_device_info *mac_type;
+	struct mac_device_info *hw;
 
 	struct stmmac_extra_stats xstats;
 	struct napi_struct napi;
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 694ebe6a0758..9c7ce1ea3aea 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -268,8 +268,8 @@ stmmac_set_pauseparam(struct net_device *netdev,
 		}
 	} else {
 		unsigned long ioaddr = netdev->base_addr;
-		priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex,
-					       priv->flow_ctrl, priv->pause);
+		priv->hw->mac->flow_ctrl(ioaddr, phy->duplex,
+					 priv->flow_ctrl, priv->pause);
 	}
 	spin_unlock(&priv->lock);
 	return ret;
@@ -283,8 +283,8 @@ static void stmmac_get_ethtool_stats(struct net_device *dev,
 	int i;
 
 	/* Update HW stats if supported */
-	priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats,
-					       ioaddr);
+	priv->hw->dma->dma_diagnostic_fr(&dev->stats, (void *) &priv->xstats,
+					 ioaddr);
 
 	for (i = 0; i < STMMAC_STATS_LEN; i++) {
 		char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 82ebbc0c8839..86e910300969 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -225,38 +225,34 @@ static void stmmac_adjust_link(struct net_device *dev)
 		if (phydev->duplex != priv->oldduplex) {
 			new_state = 1;
 			if (!(phydev->duplex))
-				ctrl &= ~priv->mac_type->hw.link.duplex;
+				ctrl &= ~priv->hw->link.duplex;
 			else
-				ctrl |= priv->mac_type->hw.link.duplex;
+				ctrl |= priv->hw->link.duplex;
 			priv->oldduplex = phydev->duplex;
 		}
 		/* Flow Control operation */
 		if (phydev->pause)
-			priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex,
-						       fc, pause_time);
+			priv->hw->mac->flow_ctrl(ioaddr, phydev->duplex,
+						 fc, pause_time);
 
 		if (phydev->speed != priv->speed) {
 			new_state = 1;
 			switch (phydev->speed) {
 			case 1000:
 				if (likely(priv->is_gmac))
-					ctrl &= ~priv->mac_type->hw.link.port;
+					ctrl &= ~priv->hw->link.port;
 				break;
 			case 100:
 			case 10:
 				if (priv->is_gmac) {
-					ctrl |= priv->mac_type->hw.link.port;
+					ctrl |= priv->hw->link.port;
 					if (phydev->speed == SPEED_100) {
-						ctrl |=
-						    priv->mac_type->hw.link.
-						    speed;
+						ctrl |= priv->hw->link.speed;
 					} else {
-						ctrl &=
-						    ~(priv->mac_type->hw.
-						      link.speed);
+						ctrl &= ~(priv->hw->link.speed);
 					}
 				} else {
-					ctrl &= ~priv->mac_type->hw.link.port;
+					ctrl &= ~priv->hw->link.port;
 				}
 				if (likely(priv->fix_mac_speed))
 					priv->fix_mac_speed(priv->bsp_priv,
@@ -509,8 +505,8 @@ static void init_dma_desc_rings(struct net_device *dev)
 	priv->cur_tx = 0;
 
 	/* Clear the Rx/Tx descriptors */
-	priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
-	priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize);
+	priv->hw->desc->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
+	priv->hw->desc->init_tx_desc(priv->dma_tx, txsize);
 
 	if (netif_msg_hw(priv)) {
 		pr_info("RX descriptor ring:\n");
@@ -545,8 +541,8 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv)
 			struct dma_desc *p = priv->dma_tx + i;
 			if (p->des2)
 				dma_unmap_single(priv->device, p->des2,
-				 priv->mac_type->ops->get_tx_len(p),
-				 DMA_TO_DEVICE);
+						 priv->hw->desc->get_tx_len(p),
+						 DMA_TO_DEVICE);
 			dev_kfree_skb_any(priv->tx_skbuff[i]);
 			priv->tx_skbuff[i] = NULL;
 		}
@@ -630,18 +626,18 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 {
 	if (!priv->is_gmac) {
 		/* MAC 10/100 */
-		priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0);
+		priv->hw->dma->dma_mode(priv->dev->base_addr, tc, 0);
 		priv->tx_coe = NO_HW_CSUM;
 	} else {
 		if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
-			priv->mac_type->ops->dma_mode(priv->dev->base_addr,
-						      SF_DMA_MODE, SF_DMA_MODE);
+			priv->hw->dma->dma_mode(priv->dev->base_addr,
+						SF_DMA_MODE, SF_DMA_MODE);
 			tc = SF_DMA_MODE;
 			priv->tx_coe = HW_CSUM;
 		} else {
 			/* Checksum computation is performed in software. */
-			priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc,
-						      SF_DMA_MODE);
+			priv->hw->dma->dma_mode(priv->dev->base_addr, tc,
+						SF_DMA_MODE);
 			priv->tx_coe = NO_HW_CSUM;
 		}
 	}
@@ -749,16 +745,16 @@ static void stmmac_tx(struct stmmac_priv *priv)
 		struct dma_desc *p = priv->dma_tx + entry;
 
 		/* Check if the descriptor is owned by the DMA. */
-		if (priv->mac_type->ops->get_tx_owner(p))
+		if (priv->hw->desc->get_tx_owner(p))
 			break;
 
 		/* Verify tx error by looking at the last segment */
-		last = priv->mac_type->ops->get_tx_ls(p);
+		last = priv->hw->desc->get_tx_ls(p);
 		if (likely(last)) {
 			int tx_error =
-			    priv->mac_type->ops->tx_status(&priv->dev->stats,
-							   &priv->xstats,
-							   p, ioaddr);
+				priv->hw->desc->tx_status(&priv->dev->stats,
+							  &priv->xstats, p,
+							  ioaddr);
 			if (likely(tx_error == 0)) {
 				priv->dev->stats.tx_packets++;
 				priv->xstats.tx_pkt_n++;
@@ -770,7 +766,7 @@ static void stmmac_tx(struct stmmac_priv *priv)
 
 		if (likely(p->des2))
 			dma_unmap_single(priv->device, p->des2,
-					 priv->mac_type->ops->get_tx_len(p),
+					 priv->hw->desc->get_tx_len(p),
 					 DMA_TO_DEVICE);
 		if (unlikely(p->des3))
 			p->des3 = 0;
@@ -791,7 +787,7 @@ static void stmmac_tx(struct stmmac_priv *priv)
 			priv->tx_skbuff[entry] = NULL;
 		}
 
-		priv->mac_type->ops->release_tx_desc(p);
+		priv->hw->desc->release_tx_desc(p);
 
 		entry = (++priv->dirty_tx) % txsize;
 	}
@@ -833,7 +829,7 @@ static int stmmac_has_work(struct stmmac_priv *priv)
 	unsigned int has_work = 0;
 	int rxret, tx_work = 0;
 
-	rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx +
+	rxret = priv->hw->desc->get_rx_owner(priv->dma_rx +
 		(priv->cur_rx % priv->dma_rx_size));
 
 	if (priv->dirty_tx != priv->cur_tx)
@@ -886,7 +882,7 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
 
 	stmmac_dma_stop_tx(priv->dev->base_addr);
 	dma_free_tx_skbufs(priv);
-	priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+	priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
 	priv->dirty_tx = 0;
 	priv->cur_tx = 0;
 	stmmac_dma_start_tx(priv->dev->base_addr);
@@ -926,8 +922,8 @@ static void stmmac_dma_interrupt(struct net_device *dev)
 			if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
 				/* Try to bump up the threshold */
 				tc += 64;
-				priv->mac_type->ops->dma_mode(ioaddr, tc,
-					      SF_DMA_MODE);
+				priv->hw->dma->dma_mode(ioaddr, tc,
+							SF_DMA_MODE);
 				priv->xstats.threshold = tc;
 			}
 			stmmac_tx_err(priv);
@@ -1059,20 +1055,20 @@ static int stmmac_open(struct net_device *dev)
 	init_dma_desc_rings(dev);
 
 	/* DMA initialization and SW reset */
-	if (unlikely(priv->mac_type->ops->dma_init(ioaddr,
-		priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) {
+	if (unlikely(priv->hw->dma->init(ioaddr, priv->pbl, priv->dma_tx_phy,
+					 priv->dma_rx_phy) < 0)) {
 
 		pr_err("%s: DMA initialization failed\n", __func__);
 		return -1;
 	}
 
 	/* Copy the MAC addr into the HW  */
-	priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0);
+	priv->hw->mac->set_umac_addr(ioaddr, dev->dev_addr, 0);
 	/* If required, perform hw setup of the bus. */
 	if (priv->bus_setup)
 		priv->bus_setup(ioaddr);
 	/* Initialize the MAC Core */
-	priv->mac_type->ops->core_init(ioaddr);
+	priv->hw->mac->core_init(ioaddr);
 
 	priv->shutdown = 0;
 
@@ -1101,8 +1097,8 @@ static int stmmac_open(struct net_device *dev)
 #endif
 	/* Dump DMA/MAC registers */
 	if (netif_msg_hw(priv)) {
-		priv->mac_type->ops->dump_mac_regs(ioaddr);
-		priv->mac_type->ops->dump_dma_regs(ioaddr);
+		priv->hw->mac->dump_regs(ioaddr);
+		priv->hw->dma->dump_regs(ioaddr);
 	}
 
 	if (priv->phydev)
@@ -1218,8 +1214,8 @@ static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
 		desc->des2 = dma_map_single(priv->device, skb->data,
 					    BUF_SIZE_8KiB, DMA_TO_DEVICE);
 		desc->des3 = desc->des2 + BUF_SIZE_4KiB;
-		priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
-						     csum_insertion);
+		priv->hw->desc->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
+						csum_insertion);
 
 		entry = (++priv->cur_tx) % txsize;
 		desc = priv->dma_tx + entry;
@@ -1228,16 +1224,17 @@ static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
 					skb->data + BUF_SIZE_8KiB,
 					buf2_size, DMA_TO_DEVICE);
 		desc->des3 = desc->des2 + BUF_SIZE_4KiB;
-		priv->mac_type->ops->prepare_tx_desc(desc, 0,
-						     buf2_size, csum_insertion);
-		priv->mac_type->ops->set_tx_owner(desc);
+		priv->hw->desc->prepare_tx_desc(desc, 0, buf2_size,
+						csum_insertion);
+		priv->hw->desc->set_tx_owner(desc);
+
 		priv->tx_skbuff[entry] = NULL;
 	} else {
 		desc->des2 = dma_map_single(priv->device, skb->data,
 					nopaged_len, DMA_TO_DEVICE);
 		desc->des3 = desc->des2 + BUF_SIZE_4KiB;
-		priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
-						     csum_insertion);
+		priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len,
+						csum_insertion);
 	}
 	return entry;
 }
@@ -1305,8 +1302,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		unsigned int nopaged_len = skb_headlen(skb);
 		desc->des2 = dma_map_single(priv->device, skb->data,
 					nopaged_len, DMA_TO_DEVICE);
-		priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
-						     csum_insertion);
+		priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len,
+						csum_insertion);
 	}
 
 	for (i = 0; i < nfrags; i++) {
@@ -1321,21 +1318,20 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 					  frag->page_offset,
 					  len, DMA_TO_DEVICE);
 		priv->tx_skbuff[entry] = NULL;
-		priv->mac_type->ops->prepare_tx_desc(desc, 0, len,
-						     csum_insertion);
-		priv->mac_type->ops->set_tx_owner(desc);
+		priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion);
+		priv->hw->desc->set_tx_owner(desc);
 	}
 
 	/* Interrupt on completition only for the latest segment */
-	priv->mac_type->ops->close_tx_desc(desc);
+	priv->hw->desc->close_tx_desc(desc);
 
 #ifdef CONFIG_STMMAC_TIMER
 	/* Clean IC while using timer */
 	if (likely(priv->tm->enable))
-		priv->mac_type->ops->clear_tx_ic(desc);
+		priv->hw->desc->clear_tx_ic(desc);
 #endif
 	/* To avoid raise condition */
-	priv->mac_type->ops->set_tx_owner(first);
+	priv->hw->desc->set_tx_owner(first);
 
 	priv->cur_tx++;
 
@@ -1395,7 +1391,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
 			}
 			RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
 		}
-		priv->mac_type->ops->set_rx_owner(p + entry);
+		priv->hw->desc->set_rx_owner(p + entry);
 	}
 	return;
 }
@@ -1416,7 +1412,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
 	}
 #endif
 	count = 0;
-	while (!priv->mac_type->ops->get_rx_owner(p)) {
+	while (!priv->hw->desc->get_rx_owner(p)) {
 		int status;
 
 		if (count >= limit)
@@ -1429,15 +1425,14 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
 		prefetch(p_next);
 
 		/* read the status of the incoming frame */
-		status = (priv->mac_type->ops->rx_status(&priv->dev->stats,
-							 &priv->xstats, p));
+		status = (priv->hw->desc->rx_status(&priv->dev->stats,
+						    &priv->xstats, p));
 		if (unlikely(status == discard_frame))
 			priv->dev->stats.rx_errors++;
 		else {
 			struct sk_buff *skb;
 			/* Length should omit the CRC */
-			int frame_len =
-			    priv->mac_type->ops->get_rx_frame_len(p) - 4;
+			int frame_len = priv->hw->desc->get_rx_frame_len(p) - 4;
 
 #ifdef STMMAC_RX_DEBUG
 			if (frame_len > ETH_FRAME_LEN)
@@ -1573,7 +1568,7 @@ static void stmmac_multicast_list(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 
 	spin_lock(&priv->lock);
-	priv->mac_type->ops->set_filter(dev);
+	priv->hw->mac->set_filter(dev);
 	spin_unlock(&priv->lock);
 	return;
 }
@@ -1627,7 +1622,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 	if (priv->is_gmac) {
 		unsigned long ioaddr = dev->base_addr;
 		/* To handle GMAC own interrupts */
-		priv->mac_type->ops->host_irq_status(ioaddr);
+		priv->hw->mac->host_irq_status(ioaddr);
 	}
 	stmmac_dma_interrupt(dev);
 
@@ -1748,7 +1743,7 @@ static int stmmac_probe(struct net_device *dev)
 	netif_napi_add(dev, &priv->napi, stmmac_poll, 64);
 
 	/* Get the MAC address */
-	priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
+	priv->hw->mac->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
 
 	if (!is_valid_ether_addr(dev->dev_addr))
 		pr_warning("\tno valid MAC address;"
@@ -1790,9 +1785,9 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 	if (!device)
 		return -ENOMEM;
 
-	priv->mac_type = device;
+	priv->hw = device;
 
-	priv->wolenabled = priv->mac_type->hw.pmt;	/* PMT supported */
+	priv->wolenabled = priv->hw->pmt;	/* PMT supported */
 	if (priv->wolenabled == PMT_SUPPORTED)
 		priv->wolopts = WAKE_MAGIC;		/* Magic Frame */
 
@@ -2048,18 +2043,17 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
 		stmmac_dma_stop_tx(dev->base_addr);
 		stmmac_dma_stop_rx(dev->base_addr);
 		/* Clear the Rx/Tx descriptors */
-		priv->mac_type->ops->init_rx_desc(priv->dma_rx,
-						  priv->dma_rx_size, dis_ic);
-		priv->mac_type->ops->init_tx_desc(priv->dma_tx,
-						  priv->dma_tx_size);
+		priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
+					     dis_ic);
+		priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
 
 		stmmac_mac_disable_tx(dev->base_addr);
 
 		if (device_may_wakeup(&(pdev->dev))) {
 			/* Enable Power down mode by programming the PMT regs */
 			if (priv->wolenabled == PMT_SUPPORTED)
-				priv->mac_type->ops->pmt(dev->base_addr,
-							 priv->wolopts);
+				priv->hw->mac->pmt(dev->base_addr,
+						   priv->wolopts);
 		} else {
 			stmmac_mac_disable_rx(dev->base_addr);
 		}
@@ -2100,7 +2094,7 @@ static int stmmac_resume(struct platform_device *pdev)
 	 * from another devices (e.g. serial console). */
 	if (device_may_wakeup(&(pdev->dev)))
 		if (priv->wolenabled == PMT_SUPPORTED)
-			priv->mac_type->ops->pmt(dev->base_addr, 0);
+			priv->hw->mac->pmt(dev->base_addr, 0);
 
 	netif_device_attach(dev);
 
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
index 8498552a22fc..131e0a603711 100644
--- a/drivers/net/stmmac/stmmac_mdio.c
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -48,8 +48,8 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned long ioaddr = ndev->base_addr;
-	unsigned int mii_address = priv->mac_type->hw.mii.addr;
-	unsigned int mii_data = priv->mac_type->hw.mii.data;
+	unsigned int mii_address = priv->hw->mii.addr;
+	unsigned int mii_data = priv->hw->mii.data;
 
 	int data;
 	u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
@@ -80,8 +80,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned long ioaddr = ndev->base_addr;
-	unsigned int mii_address = priv->mac_type->hw.mii.addr;
-	unsigned int mii_data = priv->mac_type->hw.mii.data;
+	unsigned int mii_address = priv->hw->mii.addr;
+	unsigned int mii_data = priv->hw->mii.data;
 
 	u16 value =
 	    (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
@@ -112,7 +112,7 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned long ioaddr = ndev->base_addr;
-	unsigned int mii_address = priv->mac_type->hw.mii.addr;
+	unsigned int mii_address = priv->hw->mii.addr;
 
 	if (priv->phy_reset) {
 		pr_debug("stmmac_mdio_reset: calling phy_reset\n");
-- 
cgit v1.2.3


From aec7ff278145280c2c78377aeb98feed02c8b636 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:18 +0000
Subject: stmmac: move the dma out from the main

This patch moves the dma related functions (interrupt, start, stop etc.)
out from the main driver code. This will help to support new DMA
engines.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/Makefile         |   2 +-
 drivers/net/stmmac/common.h         | 209 ++++++++--------------------
 drivers/net/stmmac/dwmac_dma.h      | 107 ++++++++++++++
 drivers/net/stmmac/dwmac_lib.c      | 263 +++++++++++++++++++++++++++++++++++
 drivers/net/stmmac/gmac.c           |   9 ++
 drivers/net/stmmac/mac100.c         |   9 ++
 drivers/net/stmmac/stmmac_ethtool.c |   1 +
 drivers/net/stmmac/stmmac_main.c    | 268 +++++-------------------------------
 8 files changed, 481 insertions(+), 387 deletions(-)
 create mode 100644 drivers/net/stmmac/dwmac_dma.h
 create mode 100644 drivers/net/stmmac/dwmac_lib.c

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile
index b2d7a5564dfa..c8f499a71251 100644
--- a/drivers/net/stmmac/Makefile
+++ b/drivers/net/stmmac/Makefile
@@ -1,4 +1,4 @@
 obj-$(CONFIG_STMMAC_ETH) += stmmac.o
 stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
-stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
+stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o dwmac_lib.o \
 		mac100.o  gmac.o $(stmmac-y)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 95782ccf44b4..6f8fe64dd226 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -25,131 +25,6 @@
 #include "descs.h"
 #include <linux/io.h>
 
-/* *********************************************
-   DMA CRS Control and Status Register Mapping
- * *********************************************/
-#define DMA_BUS_MODE		0x00001000	/* Bus Mode */
-#define DMA_XMT_POLL_DEMAND	0x00001004	/* Transmit Poll Demand */
-#define DMA_RCV_POLL_DEMAND	0x00001008	/* Received Poll Demand */
-#define DMA_RCV_BASE_ADDR	0x0000100c	/* Receive List Base */
-#define DMA_TX_BASE_ADDR	0x00001010	/* Transmit List Base */
-#define DMA_STATUS		0x00001014	/* Status Register */
-#define DMA_CONTROL		0x00001018	/* Ctrl (Operational Mode) */
-#define DMA_INTR_ENA		0x0000101c	/* Interrupt Enable */
-#define DMA_MISSED_FRAME_CTR	0x00001020	/* Missed Frame Counter */
-#define DMA_CUR_TX_BUF_ADDR	0x00001050	/* Current Host Tx Buffer */
-#define DMA_CUR_RX_BUF_ADDR	0x00001054	/* Current Host Rx Buffer */
-
-/* ********************************
-   DMA Control register defines
- * ********************************/
-#define DMA_CONTROL_ST		0x00002000	/* Start/Stop Transmission */
-#define DMA_CONTROL_SR		0x00000002	/* Start/Stop Receive */
-
-/* **************************************
-   DMA Interrupt Enable register defines
- * **************************************/
-/**** NORMAL INTERRUPT ****/
-#define DMA_INTR_ENA_NIE 0x00010000	/* Normal Summary */
-#define DMA_INTR_ENA_TIE 0x00000001	/* Transmit Interrupt */
-#define DMA_INTR_ENA_TUE 0x00000004	/* Transmit Buffer Unavailable */
-#define DMA_INTR_ENA_RIE 0x00000040	/* Receive Interrupt */
-#define DMA_INTR_ENA_ERE 0x00004000	/* Early Receive */
-
-#define DMA_INTR_NORMAL	(DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
-			DMA_INTR_ENA_TIE)
-
-/**** ABNORMAL INTERRUPT ****/
-#define DMA_INTR_ENA_AIE 0x00008000	/* Abnormal Summary */
-#define DMA_INTR_ENA_FBE 0x00002000	/* Fatal Bus Error */
-#define DMA_INTR_ENA_ETE 0x00000400	/* Early Transmit */
-#define DMA_INTR_ENA_RWE 0x00000200	/* Receive Watchdog */
-#define DMA_INTR_ENA_RSE 0x00000100	/* Receive Stopped */
-#define DMA_INTR_ENA_RUE 0x00000080	/* Receive Buffer Unavailable */
-#define DMA_INTR_ENA_UNE 0x00000020	/* Tx Underflow */
-#define DMA_INTR_ENA_OVE 0x00000010	/* Receive Overflow */
-#define DMA_INTR_ENA_TJE 0x00000008	/* Transmit Jabber */
-#define DMA_INTR_ENA_TSE 0x00000002	/* Transmit Stopped */
-
-#define DMA_INTR_ABNORMAL	(DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
-				DMA_INTR_ENA_UNE)
-
-/* DMA default interrupt mask */
-#define DMA_INTR_DEFAULT_MASK	(DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
-
-/* ****************************
- *  DMA Status register defines
- * ****************************/
-#define DMA_STATUS_GPI		0x10000000	/* PMT interrupt */
-#define DMA_STATUS_GMI		0x08000000	/* MMC interrupt */
-#define DMA_STATUS_GLI		0x04000000	/* GMAC Line interface int. */
-#define DMA_STATUS_GMI		0x08000000
-#define DMA_STATUS_GLI		0x04000000
-#define DMA_STATUS_EB_MASK	0x00380000	/* Error Bits Mask */
-#define DMA_STATUS_EB_TX_ABORT	0x00080000	/* Error Bits - TX Abort */
-#define DMA_STATUS_EB_RX_ABORT	0x00100000	/* Error Bits - RX Abort */
-#define DMA_STATUS_TS_MASK	0x00700000	/* Transmit Process State */
-#define DMA_STATUS_TS_SHIFT	20
-#define DMA_STATUS_RS_MASK	0x000e0000	/* Receive Process State */
-#define DMA_STATUS_RS_SHIFT	17
-#define DMA_STATUS_NIS	0x00010000	/* Normal Interrupt Summary */
-#define DMA_STATUS_AIS	0x00008000	/* Abnormal Interrupt Summary */
-#define DMA_STATUS_ERI	0x00004000	/* Early Receive Interrupt */
-#define DMA_STATUS_FBI	0x00002000	/* Fatal Bus Error Interrupt */
-#define DMA_STATUS_ETI	0x00000400	/* Early Transmit Interrupt */
-#define DMA_STATUS_RWT	0x00000200	/* Receive Watchdog Timeout */
-#define DMA_STATUS_RPS	0x00000100	/* Receive Process Stopped */
-#define DMA_STATUS_RU	0x00000080	/* Receive Buffer Unavailable */
-#define DMA_STATUS_RI	0x00000040	/* Receive Interrupt */
-#define DMA_STATUS_UNF	0x00000020	/* Transmit Underflow */
-#define DMA_STATUS_OVF	0x00000010	/* Receive Overflow */
-#define DMA_STATUS_TJT	0x00000008	/* Transmit Jabber Timeout */
-#define DMA_STATUS_TU	0x00000004	/* Transmit Buffer Unavailable */
-#define DMA_STATUS_TPS	0x00000002	/* Transmit Process Stopped */
-#define DMA_STATUS_TI	0x00000001	/* Transmit Interrupt */
-
-/* Other defines */
-#define HASH_TABLE_SIZE 64
-#define PAUSE_TIME 0x200
-
-/* Flow Control defines */
-#define FLOW_OFF	0
-#define FLOW_RX		1
-#define FLOW_TX		2
-#define FLOW_AUTO	(FLOW_TX | FLOW_RX)
-
-/* DMA STORE-AND-FORWARD Operation Mode */
-#define SF_DMA_MODE 1
-
-#define HW_CSUM 1
-#define NO_HW_CSUM 0
-
-/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
-#define BUF_SIZE_16KiB 16384
-#define BUF_SIZE_8KiB 8192
-#define BUF_SIZE_4KiB 4096
-#define BUF_SIZE_2KiB 2048
-
-/* Power Down and WOL */
-#define PMT_NOT_SUPPORTED 0
-#define PMT_SUPPORTED 1
-
-/* Common MAC defines */
-#define MAC_CTRL_REG		0x00000000	/* MAC Control */
-#define MAC_ENABLE_TX		0x00000008	/* Transmitter Enable */
-#define MAC_RNABLE_RX		0x00000004	/* Receiver Enable */
-
-/* MAC Management Counters register */
-#define MMC_CONTROL		0x00000100	/* MMC Control */
-#define MMC_HIGH_INTR		0x00000104	/* MMC High Interrupt */
-#define MMC_LOW_INTR		0x00000108	/* MMC Low Interrupt */
-#define MMC_HIGH_INTR_MASK	0x0000010c	/* MMC High Interrupt Mask */
-#define MMC_LOW_INTR_MASK	0x00000110	/* MMC Low Interrupt Mask */
-
-#define MMC_CONTROL_MAX_FRM_MASK	0x0003ff8	/* Maximum Frame Size */
-#define MMC_CONTROL_MAX_FRM_SHIFT	3
-#define MMC_CONTROL_MAX_FRAME		0x7FF
-
 struct stmmac_extra_stats {
 	/* Transmit errors */
 	unsigned long tx_underflow ____cacheline_aligned;
@@ -198,46 +73,56 @@ struct stmmac_extra_stats {
 	unsigned long normal_irq_n;
 };
 
-/* GMAC core can compute the checksums in HW. */
-enum rx_frame_status {
+#define HASH_TABLE_SIZE 64
+#define PAUSE_TIME 0x200
+
+/* Flow Control defines */
+#define FLOW_OFF	0
+#define FLOW_RX		1
+#define FLOW_TX		2
+#define FLOW_AUTO	(FLOW_TX | FLOW_RX)
+
+#define SF_DMA_MODE 1 /* DMA STORE-AND-FORWARD Operation Mode */
+
+#define HW_CSUM 1
+#define NO_HW_CSUM 0
+enum rx_frame_status { /* IPC status */
 	good_frame = 0,
 	discard_frame = 1,
 	csum_none = 2,
 };
 
-static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
-			 unsigned int high, unsigned int low)
-{
-	unsigned long data;
-
-	data = (addr[5] << 8) | addr[4];
-	writel(data, ioaddr + high);
-	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
-	writel(data, ioaddr + low);
+enum tx_dma_irq_status {
+	tx_hard_error = 1,
+	tx_hard_error_bump_tc = 2,
+	handle_tx_rx = 3,
+};
 
-	return;
-}
+/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
 
-static inline void stmmac_get_mac_addr(unsigned long ioaddr,
-				unsigned char *addr, unsigned int high,
-				unsigned int low)
-{
-	unsigned int hi_addr, lo_addr;
+/* Power Down and WOL */
+#define PMT_NOT_SUPPORTED 0
+#define PMT_SUPPORTED 1
 
-	/* Read the MAC address from the hardware */
-	hi_addr = readl(ioaddr + high);
-	lo_addr = readl(ioaddr + low);
+/* Common MAC defines */
+#define MAC_CTRL_REG		0x00000000	/* MAC Control */
+#define MAC_ENABLE_TX		0x00000008	/* Transmitter Enable */
+#define MAC_RNABLE_RX		0x00000004	/* Receiver Enable */
 
-	/* Extract the MAC address from the high and low words */
-	addr[0] = lo_addr & 0xff;
-	addr[1] = (lo_addr >> 8) & 0xff;
-	addr[2] = (lo_addr >> 16) & 0xff;
-	addr[3] = (lo_addr >> 24) & 0xff;
-	addr[4] = hi_addr & 0xff;
-	addr[5] = (hi_addr >> 8) & 0xff;
+/* MAC Management Counters register */
+#define MMC_CONTROL		0x00000100	/* MMC Control */
+#define MMC_HIGH_INTR		0x00000104	/* MMC High Interrupt */
+#define MMC_LOW_INTR		0x00000108	/* MMC Low Interrupt */
+#define MMC_HIGH_INTR_MASK	0x0000010c	/* MMC High Interrupt Mask */
+#define MMC_LOW_INTR_MASK	0x00000110	/* MMC Low Interrupt Mask */
 
-	return;
-}
+#define MMC_CONTROL_MAX_FRM_MASK	0x0003ff8	/* Maximum Frame Size */
+#define MMC_CONTROL_MAX_FRM_SHIFT	3
+#define MMC_CONTROL_MAX_FRAME		0x7FF
 
 struct stmmac_desc_ops {
 	/* DMA RX descriptor ring initialization */
@@ -287,6 +172,15 @@ struct stmmac_dma_ops {
 	/* To track extra statistic (if supported) */
 	void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
 				   unsigned long ioaddr);
+	void (*enable_dma_transmission) (unsigned long ioaddr);
+	void (*enable_dma_irq) (unsigned long ioaddr);
+	void (*disable_dma_irq) (unsigned long ioaddr);
+	void (*start_tx) (unsigned long ioaddr);
+	void (*stop_tx) (unsigned long ioaddr);
+	void (*start_rx) (unsigned long ioaddr);
+	void (*stop_rx) (unsigned long ioaddr);
+	int (*dma_interrupt) (unsigned long ioaddr,
+			      struct stmmac_extra_stats *x);
 };
 
 struct stmmac_ops {
@@ -332,3 +226,8 @@ struct mac_device_info {
 
 struct mac_device_info *gmac_setup(unsigned long addr);
 struct mac_device_info *mac100_setup(unsigned long addr);
+
+extern void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+				unsigned int high, unsigned int low);
+extern void stmmac_get_mac_addr(unsigned long ioaddr, unsigned char *addr,
+				unsigned int high, unsigned int low);
diff --git a/drivers/net/stmmac/dwmac_dma.h b/drivers/net/stmmac/dwmac_dma.h
new file mode 100644
index 000000000000..de848d9f6060
--- /dev/null
+++ b/drivers/net/stmmac/dwmac_dma.h
@@ -0,0 +1,107 @@
+/*******************************************************************************
+  DWMAC DMA Header file.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_BUS_MODE		0x00001000	/* Bus Mode */
+#define DMA_XMT_POLL_DEMAND	0x00001004	/* Transmit Poll Demand */
+#define DMA_RCV_POLL_DEMAND	0x00001008	/* Received Poll Demand */
+#define DMA_RCV_BASE_ADDR	0x0000100c	/* Receive List Base */
+#define DMA_TX_BASE_ADDR	0x00001010	/* Transmit List Base */
+#define DMA_STATUS		0x00001014	/* Status Register */
+#define DMA_CONTROL		0x00001018	/* Ctrl (Operational Mode) */
+#define DMA_INTR_ENA		0x0000101c	/* Interrupt Enable */
+#define DMA_MISSED_FRAME_CTR	0x00001020	/* Missed Frame Counter */
+#define DMA_CUR_TX_BUF_ADDR	0x00001050	/* Current Host Tx Buffer */
+#define DMA_CUR_RX_BUF_ADDR	0x00001054	/* Current Host Rx Buffer */
+
+/* DMA Control register defines */
+#define DMA_CONTROL_ST		0x00002000	/* Start/Stop Transmission */
+#define DMA_CONTROL_SR		0x00000002	/* Start/Stop Receive */
+
+/* DMA Normal interrupt */
+#define DMA_INTR_ENA_NIE 0x00010000	/* Normal Summary */
+#define DMA_INTR_ENA_TIE 0x00000001	/* Transmit Interrupt */
+#define DMA_INTR_ENA_TUE 0x00000004	/* Transmit Buffer Unavailable */
+#define DMA_INTR_ENA_RIE 0x00000040	/* Receive Interrupt */
+#define DMA_INTR_ENA_ERE 0x00004000	/* Early Receive */
+
+#define DMA_INTR_NORMAL	(DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+			DMA_INTR_ENA_TIE)
+
+/* DMA Abnormal interrupt */
+#define DMA_INTR_ENA_AIE 0x00008000	/* Abnormal Summary */
+#define DMA_INTR_ENA_FBE 0x00002000	/* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE 0x00000400	/* Early Transmit */
+#define DMA_INTR_ENA_RWE 0x00000200	/* Receive Watchdog */
+#define DMA_INTR_ENA_RSE 0x00000100	/* Receive Stopped */
+#define DMA_INTR_ENA_RUE 0x00000080	/* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_UNE 0x00000020	/* Tx Underflow */
+#define DMA_INTR_ENA_OVE 0x00000010	/* Receive Overflow */
+#define DMA_INTR_ENA_TJE 0x00000008	/* Transmit Jabber */
+#define DMA_INTR_ENA_TSE 0x00000002	/* Transmit Stopped */
+
+#define DMA_INTR_ABNORMAL	(DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+				DMA_INTR_ENA_UNE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK	(DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+
+/* DMA Status register defines */
+#define DMA_STATUS_GPI		0x10000000	/* PMT interrupt */
+#define DMA_STATUS_GMI		0x08000000	/* MMC interrupt */
+#define DMA_STATUS_GLI		0x04000000	/* GMAC Line interface int */
+#define DMA_STATUS_GMI		0x08000000
+#define DMA_STATUS_GLI		0x04000000
+#define DMA_STATUS_EB_MASK	0x00380000	/* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT	0x00080000	/* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT	0x00100000	/* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK	0x00700000	/* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT	20
+#define DMA_STATUS_RS_MASK	0x000e0000	/* Receive Process State */
+#define DMA_STATUS_RS_SHIFT	17
+#define DMA_STATUS_NIS	0x00010000	/* Normal Interrupt Summary */
+#define DMA_STATUS_AIS	0x00008000	/* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI	0x00004000	/* Early Receive Interrupt */
+#define DMA_STATUS_FBI	0x00002000	/* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI	0x00000400	/* Early Transmit Interrupt */
+#define DMA_STATUS_RWT	0x00000200	/* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS	0x00000100	/* Receive Process Stopped */
+#define DMA_STATUS_RU	0x00000080	/* Receive Buffer Unavailable */
+#define DMA_STATUS_RI	0x00000040	/* Receive Interrupt */
+#define DMA_STATUS_UNF	0x00000020	/* Transmit Underflow */
+#define DMA_STATUS_OVF	0x00000010	/* Receive Overflow */
+#define DMA_STATUS_TJT	0x00000008	/* Transmit Jabber Timeout */
+#define DMA_STATUS_TU	0x00000004	/* Transmit Buffer Unavailable */
+#define DMA_STATUS_TPS	0x00000002	/* Transmit Process Stopped */
+#define DMA_STATUS_TI	0x00000001	/* Transmit Interrupt */
+
+extern void dwmac_enable_dma_transmission(unsigned long ioaddr);
+extern void dwmac_enable_dma_irq(unsigned long ioaddr);
+extern void dwmac_disable_dma_irq(unsigned long ioaddr);
+extern void dwmac_dma_start_tx(unsigned long ioaddr);
+extern void dwmac_dma_stop_tx(unsigned long ioaddr);
+extern void dwmac_dma_start_rx(unsigned long ioaddr);
+extern void dwmac_dma_stop_rx(unsigned long ioaddr);
+extern int dwmac_dma_interrupt(unsigned long ioaddr,
+				struct stmmac_extra_stats *x);
diff --git a/drivers/net/stmmac/dwmac_lib.c b/drivers/net/stmmac/dwmac_lib.c
new file mode 100644
index 000000000000..d4adb1eaa447
--- /dev/null
+++ b/drivers/net/stmmac/dwmac_lib.c
@@ -0,0 +1,263 @@
+/*******************************************************************************
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/io.h>
+#include "common.h"
+#include "dwmac_dma.h"
+
+#undef DWMAC_DMA_DEBUG
+#ifdef DWMAC_DMA_DEBUG
+#define DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define DBG(fmt, args...)  do { } while (0)
+#endif
+
+/* CSR1 enables the transmit DMA to check for new descriptor */
+void dwmac_enable_dma_transmission(unsigned long ioaddr)
+{
+	writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
+}
+
+void dwmac_enable_dma_irq(unsigned long ioaddr)
+{
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
+
+void dwmac_disable_dma_irq(unsigned long ioaddr)
+{
+	writel(0, ioaddr + DMA_INTR_ENA);
+}
+
+void dwmac_dma_start_tx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value |= DMA_CONTROL_ST;
+	writel(value, ioaddr + DMA_CONTROL);
+	return;
+}
+
+void dwmac_dma_stop_tx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value &= ~DMA_CONTROL_ST;
+	writel(value, ioaddr + DMA_CONTROL);
+	return;
+}
+
+void dwmac_dma_start_rx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value |= DMA_CONTROL_SR;
+	writel(value, ioaddr + DMA_CONTROL);
+
+	return;
+}
+
+void dwmac_dma_stop_rx(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + DMA_CONTROL);
+	value &= ~DMA_CONTROL_SR;
+	writel(value, ioaddr + DMA_CONTROL);
+
+	return;
+}
+
+#ifdef DWMAC_DMA_DEBUG
+static void show_tx_process_state(unsigned int status)
+{
+	unsigned int state;
+	state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
+
+	switch (state) {
+	case 0:
+		pr_info("- TX (Stopped): Reset or Stop command\n");
+		break;
+	case 1:
+		pr_info("- TX (Running):Fetching the Tx desc\n");
+		break;
+	case 2:
+		pr_info("- TX (Running): Waiting for end of tx\n");
+		break;
+	case 3:
+		pr_info("- TX (Running): Reading the data "
+		       "and queuing the data into the Tx buf\n");
+		break;
+	case 6:
+		pr_info("- TX (Suspended): Tx Buff Underflow "
+		       "or an unavailable Transmit descriptor\n");
+		break;
+	case 7:
+		pr_info("- TX (Running): Closing Tx descriptor\n");
+		break;
+	default:
+		break;
+	}
+	return;
+}
+
+static void show_rx_process_state(unsigned int status)
+{
+	unsigned int state;
+	state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
+
+	switch (state) {
+	case 0:
+		pr_info("- RX (Stopped): Reset or Stop command\n");
+		break;
+	case 1:
+		pr_info("- RX (Running): Fetching the Rx desc\n");
+		break;
+	case 2:
+		pr_info("- RX (Running):Checking for end of pkt\n");
+		break;
+	case 3:
+		pr_info("- RX (Running): Waiting for Rx pkt\n");
+		break;
+	case 4:
+		pr_info("- RX (Suspended): Unavailable Rx buf\n");
+		break;
+	case 5:
+		pr_info("- RX (Running): Closing Rx descriptor\n");
+		break;
+	case 6:
+		pr_info("- RX(Running): Flushing the current frame"
+		       " from the Rx buf\n");
+		break;
+	case 7:
+		pr_info("- RX (Running): Queuing the Rx frame"
+		       " from the Rx buf into memory\n");
+		break;
+	default:
+		break;
+	}
+	return;
+}
+#endif
+
+int dwmac_dma_interrupt(unsigned long ioaddr,
+			struct stmmac_extra_stats *x)
+{
+	int ret = 0;
+	/* read the status register (CSR5) */
+	u32 intr_status = readl(ioaddr + DMA_STATUS);
+
+	DBG(INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+#ifdef DWMAC_DMA_DEBUG
+	/* It displays the DMA process states (CSR5 register) */
+	show_tx_process_state(intr_status);
+	show_rx_process_state(intr_status);
+#endif
+	/* ABNORMAL interrupts */
+	if (unlikely(intr_status & DMA_STATUS_AIS)) {
+		DBG(INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+		if (unlikely(intr_status & DMA_STATUS_UNF)) {
+			DBG(INFO, "transmit underflow\n");
+			ret = tx_hard_error_bump_tc;
+			x->tx_undeflow_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_TJT)) {
+			DBG(INFO, "transmit jabber\n");
+			x->tx_jabber_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_OVF)) {
+			DBG(INFO, "recv overflow\n");
+			x->rx_overflow_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_RU)) {
+			DBG(INFO, "receive buffer unavailable\n");
+			x->rx_buf_unav_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_RPS)) {
+			DBG(INFO, "receive process stopped\n");
+			x->rx_process_stopped_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_RWT)) {
+			DBG(INFO, "receive watchdog\n");
+			x->rx_watchdog_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_ETI)) {
+			DBG(INFO, "transmit early interrupt\n");
+			x->tx_early_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_TPS)) {
+			DBG(INFO, "transmit process stopped\n");
+			x->tx_process_stopped_irq++;
+			ret = tx_hard_error;
+		}
+		if (unlikely(intr_status & DMA_STATUS_FBI)) {
+			DBG(INFO, "fatal bus error\n");
+			x->fatal_bus_error_irq++;
+			ret = tx_hard_error;
+		}
+	}
+	/* TX/RX NORMAL interrupts */
+	if (intr_status & DMA_STATUS_NIS) {
+		x->normal_irq_n++;
+		if (likely((intr_status & DMA_STATUS_RI) ||
+			 (intr_status & (DMA_STATUS_TI))))
+				ret = handle_tx_rx;
+	}
+	/* Optional hardware blocks, interrupts should be disabled */
+	if (unlikely(intr_status &
+		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+		pr_info("%s: unexpected status %08x\n", __func__, intr_status);
+	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+
+	DBG(INFO, "\n\n");
+	return ret;
+}
+
+
+void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+			 unsigned int high, unsigned int low)
+{
+	unsigned long data;
+
+	data = (addr[5] << 8) | addr[4];
+	writel(data, ioaddr + high);
+	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+	writel(data, ioaddr + low);
+
+	return;
+}
+
+void stmmac_get_mac_addr(unsigned long ioaddr, unsigned char *addr,
+			 unsigned int high, unsigned int low)
+{
+	unsigned int hi_addr, lo_addr;
+
+	/* Read the MAC address from the hardware */
+	hi_addr = readl(ioaddr + high);
+	lo_addr = readl(ioaddr + low);
+
+	/* Extract the MAC address from the high and low words */
+	addr[0] = lo_addr & 0xff;
+	addr[1] = (lo_addr >> 8) & 0xff;
+	addr[2] = (lo_addr >> 16) & 0xff;
+	addr[3] = (lo_addr >> 24) & 0xff;
+	addr[4] = hi_addr & 0xff;
+	addr[5] = (hi_addr >> 8) & 0xff;
+
+	return;
+}
+
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index cf199d969227..07880922ff46 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -31,6 +31,7 @@
 
 #include "stmmac.h"
 #include "gmac.h"
+#include "dwmac_dma.h"
 
 #undef GMAC_DEBUG
 /*#define GMAC_DEBUG*/
@@ -646,6 +647,14 @@ struct stmmac_dma_ops gmac_dma_ops = {
 	.dump_regs = gmac_dump_dma_regs,
 	.dma_mode = gmac_dma_operation_mode,
 	.dma_diagnostic_fr = gmac_dma_diagnostic_fr,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
 };
 
 struct stmmac_desc_ops gmac_desc_ops = {
diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c
index 45d0457ddb6e..b675f7c67f6e 100644
--- a/drivers/net/stmmac/mac100.c
+++ b/drivers/net/stmmac/mac100.c
@@ -33,6 +33,7 @@
 
 #include "common.h"
 #include "mac100.h"
+#include "dwmac_dma.h"
 
 #undef MAC100_DEBUG
 /*#define MAC100_DEBUG*/
@@ -483,6 +484,14 @@ struct stmmac_dma_ops mac100_dma_ops = {
 	.dump_regs = mac100_dump_dma_regs,
 	.dma_mode = mac100_dma_operation_mode,
 	.dma_diagnostic_fr = mac100_dma_diagnostic_fr,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
 };
 
 struct stmmac_desc_ops mac100_desc_ops = {
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 9c7ce1ea3aea..0abeff6193a1 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -28,6 +28,7 @@
 #include <linux/phy.h>
 
 #include "stmmac.h"
+#include "dwmac_dma.h"
 
 #define REG_SPACE_SIZE	0x1054
 #define MAC100_ETHTOOL_NAME	"st_mac100"
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 86e910300969..e6c5a3cf4af2 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -571,50 +571,6 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
 	return;
 }
 
-/**
- * stmmac_dma_start_tx
- * @ioaddr: device I/O address
- * Description:  this function starts the DMA tx process.
- */
-static void stmmac_dma_start_tx(unsigned long ioaddr)
-{
-	u32 value = readl(ioaddr + DMA_CONTROL);
-	value |= DMA_CONTROL_ST;
-	writel(value, ioaddr + DMA_CONTROL);
-	return;
-}
-
-static void stmmac_dma_stop_tx(unsigned long ioaddr)
-{
-	u32 value = readl(ioaddr + DMA_CONTROL);
-	value &= ~DMA_CONTROL_ST;
-	writel(value, ioaddr + DMA_CONTROL);
-	return;
-}
-
-/**
- * stmmac_dma_start_rx
- * @ioaddr: device I/O address
- * Description:  this function starts the DMA rx process.
- */
-static void stmmac_dma_start_rx(unsigned long ioaddr)
-{
-	u32 value = readl(ioaddr + DMA_CONTROL);
-	value |= DMA_CONTROL_SR;
-	writel(value, ioaddr + DMA_CONTROL);
-
-	return;
-}
-
-static void stmmac_dma_stop_rx(unsigned long ioaddr)
-{
-	u32 value = readl(ioaddr + DMA_CONTROL);
-	value &= ~DMA_CONTROL_SR;
-	writel(value, ioaddr + DMA_CONTROL);
-
-	return;
-}
-
 /**
  *  stmmac_dma_operation_mode - HW DMA operation mode
  *  @priv : pointer to the private device structure.
@@ -646,88 +602,6 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 	return;
 }
 
-#ifdef STMMAC_DEBUG
-/**
- * show_tx_process_state
- * @status: tx descriptor status field
- * Description: it shows the Transmit Process State for CSR5[22:20]
- */
-static void show_tx_process_state(unsigned int status)
-{
-	unsigned int state;
-	state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
-
-	switch (state) {
-	case 0:
-		pr_info("- TX (Stopped): Reset or Stop command\n");
-		break;
-	case 1:
-		pr_info("- TX (Running):Fetching the Tx desc\n");
-		break;
-	case 2:
-		pr_info("- TX (Running): Waiting for end of tx\n");
-		break;
-	case 3:
-		pr_info("- TX (Running): Reading the data "
-		       "and queuing the data into the Tx buf\n");
-		break;
-	case 6:
-		pr_info("- TX (Suspended): Tx Buff Underflow "
-		       "or an unavailable Transmit descriptor\n");
-		break;
-	case 7:
-		pr_info("- TX (Running): Closing Tx descriptor\n");
-		break;
-	default:
-		break;
-	}
-	return;
-}
-
-/**
- * show_rx_process_state
- * @status: rx descriptor status field
- * Description: it shows the  Receive Process State for CSR5[19:17]
- */
-static void show_rx_process_state(unsigned int status)
-{
-	unsigned int state;
-	state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
-
-	switch (state) {
-	case 0:
-		pr_info("- RX (Stopped): Reset or Stop command\n");
-		break;
-	case 1:
-		pr_info("- RX (Running): Fetching the Rx desc\n");
-		break;
-	case 2:
-		pr_info("- RX (Running):Checking for end of pkt\n");
-		break;
-	case 3:
-		pr_info("- RX (Running): Waiting for Rx pkt\n");
-		break;
-	case 4:
-		pr_info("- RX (Suspended): Unavailable Rx buf\n");
-		break;
-	case 5:
-		pr_info("- RX (Running): Closing Rx descriptor\n");
-		break;
-	case 6:
-		pr_info("- RX(Running): Flushing the current frame"
-		       " from the Rx buf\n");
-		break;
-	case 7:
-		pr_info("- RX (Running): Queuing the Rx frame"
-		       " from the Rx buf into memory\n");
-		break;
-	default:
-		break;
-	}
-	return;
-}
-#endif
-
 /**
  * stmmac_tx:
  * @priv: private driver structure
@@ -811,7 +685,7 @@ static inline void stmmac_enable_irq(struct stmmac_priv *priv)
 		priv->tm->timer_start(tmrate);
 	else
 #endif
-	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
+		priv->hw->dma->enable_dma_irq(priv->dev->base_addr);
 }
 
 static inline void stmmac_disable_irq(struct stmmac_priv *priv)
@@ -821,7 +695,7 @@ static inline void stmmac_disable_irq(struct stmmac_priv *priv)
 		priv->tm->timer_stop();
 	else
 #endif
-	writel(0, priv->dev->base_addr + DMA_INTR_ENA);
+		priv->hw->dma->disable_dma_irq(priv->dev->base_addr);
 }
 
 static int stmmac_has_work(struct stmmac_priv *priv)
@@ -880,12 +754,12 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
 {
 	netif_stop_queue(priv->dev);
 
-	stmmac_dma_stop_tx(priv->dev->base_addr);
+	priv->hw->dma->stop_tx(priv->dev->base_addr);
 	dma_free_tx_skbufs(priv);
 	priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
 	priv->dirty_tx = 0;
 	priv->cur_tx = 0;
-	stmmac_dma_start_tx(priv->dev->base_addr);
+	priv->hw->dma->start_tx(priv->dev->base_addr);
 
 	priv->dev->stats.tx_errors++;
 	netif_wake_queue(priv->dev);
@@ -893,95 +767,27 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
 	return;
 }
 
-/**
- * stmmac_dma_interrupt - Interrupt handler for the driver
- * @dev: net device structure
- * Description: Interrupt handler for the driver (DMA).
- */
-static void stmmac_dma_interrupt(struct net_device *dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	struct stmmac_priv *priv = netdev_priv(dev);
-	/* read the status register (CSR5) */
-	u32 intr_status = readl(ioaddr + DMA_STATUS);
-
-	DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
 
-#ifdef STMMAC_DEBUG
-	/* It displays the DMA transmit process state (CSR5 register) */
-	if (netif_msg_tx_done(priv))
-		show_tx_process_state(intr_status);
-	if (netif_msg_rx_status(priv))
-		show_rx_process_state(intr_status);
-#endif
-	/* ABNORMAL interrupts */
-	if (unlikely(intr_status & DMA_STATUS_AIS)) {
-		DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
-		if (unlikely(intr_status & DMA_STATUS_UNF)) {
-			DBG(intr, INFO, "transmit underflow\n");
-			if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
-				/* Try to bump up the threshold */
-				tc += 64;
-				priv->hw->dma->dma_mode(ioaddr, tc,
-							SF_DMA_MODE);
-				priv->xstats.threshold = tc;
-			}
-			stmmac_tx_err(priv);
-			priv->xstats.tx_undeflow_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_TJT)) {
-			DBG(intr, INFO, "transmit jabber\n");
-			priv->xstats.tx_jabber_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_OVF)) {
-			DBG(intr, INFO, "recv overflow\n");
-			priv->xstats.rx_overflow_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_RU)) {
-			DBG(intr, INFO, "receive buffer unavailable\n");
-			priv->xstats.rx_buf_unav_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_RPS)) {
-			DBG(intr, INFO, "receive process stopped\n");
-			priv->xstats.rx_process_stopped_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_RWT)) {
-			DBG(intr, INFO, "receive watchdog\n");
-			priv->xstats.rx_watchdog_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_ETI)) {
-			DBG(intr, INFO, "transmit early interrupt\n");
-			priv->xstats.tx_early_irq++;
-		}
-		if (unlikely(intr_status & DMA_STATUS_TPS)) {
-			DBG(intr, INFO, "transmit process stopped\n");
-			priv->xstats.tx_process_stopped_irq++;
-			stmmac_tx_err(priv);
-		}
-		if (unlikely(intr_status & DMA_STATUS_FBI)) {
-			DBG(intr, INFO, "fatal bus error\n");
-			priv->xstats.fatal_bus_error_irq++;
-			stmmac_tx_err(priv);
+static void stmmac_dma_interrupt(struct stmmac_priv *priv)
+{
+	unsigned long ioaddr = priv->dev->base_addr;
+	int status;
+
+	status = priv->hw->dma->dma_interrupt(priv->dev->base_addr,
+					      &priv->xstats);
+	if (likely(status == handle_tx_rx))
+		_stmmac_schedule(priv);
+
+	else if (unlikely(status == tx_hard_error_bump_tc)) {
+		/* Try to bump up the dma threshold on this failure */
+		if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
+			tc += 64;
+			priv->hw->dma->dma_mode(ioaddr, tc, SF_DMA_MODE);
+			priv->xstats.threshold = tc;
 		}
-	}
-
-	/* TX/RX NORMAL interrupts */
-	if (intr_status & DMA_STATUS_NIS) {
-		priv->xstats.normal_irq_n++;
-		if (likely((intr_status & DMA_STATUS_RI) ||
-			 (intr_status & (DMA_STATUS_TI))))
-				_stmmac_schedule(priv);
-	}
-
-	/* Optional hardware blocks, interrupts should be disabled */
-	if (unlikely(intr_status &
-		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
-		pr_info("%s: unexpected status %08x\n", __func__, intr_status);
-
-	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
-	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
-
-	DBG(intr, INFO, "\n\n");
+		stmmac_tx_err(priv);
+	} else if (unlikely(status == tx_hard_error))
+		stmmac_tx_err(priv);
 
 	return;
 }
@@ -1089,8 +895,8 @@ static int stmmac_open(struct net_device *dev)
 
 	/* Start the ball rolling... */
 	DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
-	stmmac_dma_start_tx(ioaddr);
-	stmmac_dma_start_rx(ioaddr);
+	priv->hw->dma->start_tx(ioaddr);
+	priv->hw->dma->start_rx(ioaddr);
 
 #ifdef CONFIG_STMMAC_TIMER
 	priv->tm->timer_start(tmrate);
@@ -1142,8 +948,8 @@ static int stmmac_release(struct net_device *dev)
 	free_irq(dev->irq, dev);
 
 	/* Stop TX/RX DMA and clear the descriptors */
-	stmmac_dma_stop_tx(dev->base_addr);
-	stmmac_dma_stop_rx(dev->base_addr);
+	priv->hw->dma->stop_tx(dev->base_addr);
+	priv->hw->dma->stop_rx(dev->base_addr);
 
 	/* Release and free the Rx/Tx resources */
 	free_dma_desc_resources(priv);
@@ -1227,7 +1033,6 @@ static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
 		priv->hw->desc->prepare_tx_desc(desc, 0, buf2_size,
 						csum_insertion);
 		priv->hw->desc->set_tx_owner(desc);
-
 		priv->tx_skbuff[entry] = NULL;
 	} else {
 		desc->des2 = dma_map_single(priv->device, skb->data,
@@ -1353,8 +1158,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev->stats.tx_bytes += skb->len;
 
-	/* CSR1 enables the transmit DMA to check for new descriptor */
-	writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND);
+	priv->hw->dma->enable_dma_transmission(dev->base_addr);
 
 	return NETDEV_TX_OK;
 }
@@ -1624,7 +1428,8 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 		/* To handle GMAC own interrupts */
 		priv->hw->mac->host_irq_status(ioaddr);
 	}
-	stmmac_dma_interrupt(dev);
+
+	stmmac_dma_interrupt(priv);
 
 	return IRQ_HANDLED;
 }
@@ -1988,12 +1793,13 @@ out:
 static int stmmac_dvr_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
 	struct resource *res;
 
 	pr_info("%s:\n\tremoving driver", __func__);
 
-	stmmac_dma_stop_rx(ndev->base_addr);
-	stmmac_dma_stop_tx(ndev->base_addr);
+	priv->hw->dma->stop_rx(ndev->base_addr);
+	priv->hw->dma->stop_tx(ndev->base_addr);
 
 	stmmac_mac_disable_rx(ndev->base_addr);
 	stmmac_mac_disable_tx(ndev->base_addr);
@@ -2040,8 +1846,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
 		napi_disable(&priv->napi);
 
 		/* Stop TX/RX DMA */
-		stmmac_dma_stop_tx(dev->base_addr);
-		stmmac_dma_stop_rx(dev->base_addr);
+		priv->hw->dma->stop_tx(dev->base_addr);
+		priv->hw->dma->stop_rx(dev->base_addr);
 		/* Clear the Rx/Tx descriptors */
 		priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
 					     dis_ic);
@@ -2101,8 +1907,8 @@ static int stmmac_resume(struct platform_device *pdev)
 	/* Enable the MAC and DMA */
 	stmmac_mac_enable_rx(ioaddr);
 	stmmac_mac_enable_tx(ioaddr);
-	stmmac_dma_start_tx(ioaddr);
-	stmmac_dma_start_rx(ioaddr);
+	priv->hw->dma->start_tx(ioaddr);
+	priv->hw->dma->start_rx(ioaddr);
 
 #ifdef CONFIG_STMMAC_TIMER
 	priv->tm->timer_start(tmrate);
-- 
cgit v1.2.3


From 7e848ae113ca7442ba6b44168fa2238224f37e8a Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:19 +0000
Subject: stmmac: rename mac100 as dwmac100 and fix spare coding style

This patch renames the mac100.[ch] as dwmac100.[ch]; this
looks more specific and appropriate for these chip series.
The patch also fixes some spare coding style issues.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/Makefile      |   2 +-
 drivers/net/stmmac/common.h      |   2 +-
 drivers/net/stmmac/dwmac100.c    | 540 +++++++++++++++++++++++++++++++++++++++
 drivers/net/stmmac/dwmac100.h    | 116 +++++++++
 drivers/net/stmmac/mac100.c      | 535 --------------------------------------
 drivers/net/stmmac/mac100.h      | 116 ---------
 drivers/net/stmmac/stmmac_main.c |   2 +-
 7 files changed, 659 insertions(+), 654 deletions(-)
 create mode 100644 drivers/net/stmmac/dwmac100.c
 create mode 100644 drivers/net/stmmac/dwmac100.h
 delete mode 100644 drivers/net/stmmac/mac100.c
 delete mode 100644 drivers/net/stmmac/mac100.h

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile
index c8f499a71251..2ed83859fd59 100644
--- a/drivers/net/stmmac/Makefile
+++ b/drivers/net/stmmac/Makefile
@@ -1,4 +1,4 @@
 obj-$(CONFIG_STMMAC_ETH) += stmmac.o
 stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
 stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o dwmac_lib.o \
-		mac100.o  gmac.o $(stmmac-y)
+		dwmac100.o  gmac.o $(stmmac-y)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 6f8fe64dd226..987faaaa1920 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -225,7 +225,7 @@ struct mac_device_info {
 };
 
 struct mac_device_info *gmac_setup(unsigned long addr);
-struct mac_device_info *mac100_setup(unsigned long addr);
+struct mac_device_info *dwmac100_setup(unsigned long addr);
 
 extern void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
 				unsigned int high, unsigned int low);
diff --git a/drivers/net/stmmac/dwmac100.c b/drivers/net/stmmac/dwmac100.c
new file mode 100644
index 000000000000..010c8b206359
--- /dev/null
+++ b/drivers/net/stmmac/dwmac100.c
@@ -0,0 +1,540 @@
+/*******************************************************************************
+  This is the driver for the MAC 10/100 on-chip Ethernet controller
+  currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
+
+  DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
+  this code.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "common.h"
+#include "dwmac100.h"
+#include "dwmac_dma.h"
+
+#undef DWMAC100_DEBUG
+/*#define DWMAC100_DEBUG*/
+#ifdef DWMAC100_DEBUG
+#define DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define DBG(fmt, args...)  do { } while (0)
+#endif
+
+static void dwmac100_core_init(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + MAC_CONTROL);
+
+	writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL);
+
+#ifdef STMMAC_VLAN_TAG_USED
+	writel(ETH_P_8021Q, ioaddr + MAC_VLAN1);
+#endif
+	return;
+}
+
+static void dwmac100_dump_mac_regs(unsigned long ioaddr)
+{
+	pr_info("\t----------------------------------------------\n"
+		"\t  DWMAC 100 CSR (base addr = 0x%8x)\n"
+		"\t----------------------------------------------\n",
+		(unsigned int)ioaddr);
+	pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
+		readl(ioaddr + MAC_CONTROL));
+	pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
+		readl(ioaddr + MAC_ADDR_HIGH));
+	pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
+		readl(ioaddr + MAC_ADDR_LOW));
+	pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
+		MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
+	pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
+		MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
+	pr_info("\tflow control (offset 0x%x): 0x%08x\n",
+		MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
+	pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
+		readl(ioaddr + MAC_VLAN1));
+	pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
+		readl(ioaddr + MAC_VLAN2));
+	pr_info("\n\tMAC management counter registers\n");
+	pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n",
+		MMC_CONTROL, readl(ioaddr + MMC_CONTROL));
+	pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n",
+		MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR));
+	pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n",
+		MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR));
+	pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n",
+		MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK));
+	pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n",
+		MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK));
+	return;
+}
+
+static int dwmac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
+			   u32 dma_rx)
+{
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	/* DMA SW reset */
+	value |= DMA_BUS_MODE_SFT_RESET;
+	writel(value, ioaddr + DMA_BUS_MODE);
+	do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+	/* Enable Application Access by writing to DMA CSR0 */
+	writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
+	       ioaddr + DMA_BUS_MODE);
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+	/* The base address of the RX/TX descriptor lists must be written into
+	 * DMA CSR3 and CSR4, respectively. */
+	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+	return 0;
+}
+
+/* Store and Forward capability is not used at all..
+ * The transmit threshold can be programmed by
+ * setting the TTC bits in the DMA control register.*/
+static void dwmac100_dma_operation_mode(unsigned long ioaddr, int txmode,
+				      int rxmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (txmode <= 32)
+		csr6 |= DMA_CONTROL_TTC_32;
+	else if (txmode <= 64)
+		csr6 |= DMA_CONTROL_TTC_64;
+	else
+		csr6 |= DMA_CONTROL_TTC_128;
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+
+	return;
+}
+
+static void dwmac100_dump_dma_regs(unsigned long ioaddr)
+{
+	int i;
+
+	DBG(KERN_DEBUG "DWMAC 100 DMA CSR \n");
+	for (i = 0; i < 9; i++)
+		pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
+		       (DMA_BUS_MODE + i * 4),
+		       readl(ioaddr + DMA_BUS_MODE + i * 4));
+	DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n",
+	    DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR));
+	DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n",
+	    DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
+	return;
+}
+
+/* DMA controller has two counters to track the number of
+ * the receive missed frames. */
+static void dwmac100_dma_diagnostic_fr(void *data,
+				     struct stmmac_extra_stats *x,
+				     unsigned long ioaddr)
+{
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+	u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
+
+	if (unlikely(csr8)) {
+		if (csr8 & DMA_MISSED_FRAME_OVE) {
+			stats->rx_over_errors += 0x800;
+			x->rx_overflow_cntr += 0x800;
+		} else {
+			unsigned int ove_cntr;
+			ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17);
+			stats->rx_over_errors += ove_cntr;
+			x->rx_overflow_cntr += ove_cntr;
+		}
+
+		if (csr8 & DMA_MISSED_FRAME_OVE_M) {
+			stats->rx_missed_errors += 0xffff;
+			x->rx_missed_cntr += 0xffff;
+		} else {
+			unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR);
+			stats->rx_missed_errors += miss_f;
+			x->rx_missed_cntr += miss_f;
+		}
+	}
+	return;
+}
+
+static int dwmac100_get_tx_frame_status(void *data,
+				      struct stmmac_extra_stats *x,
+				      struct dma_desc *p, unsigned long ioaddr)
+{
+	int ret = 0;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.tx.error_summary)) {
+		if (unlikely(p->des01.tx.underflow_error)) {
+			x->tx_underflow++;
+			stats->tx_fifo_errors++;
+		}
+		if (unlikely(p->des01.tx.no_carrier)) {
+			x->tx_carrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely(p->des01.tx.loss_carrier)) {
+			x->tx_losscarrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely((p->des01.tx.excessive_deferral) ||
+			     (p->des01.tx.excessive_collisions) ||
+			     (p->des01.tx.late_collision)))
+			stats->collisions += p->des01.tx.collision_count;
+		ret = -1;
+	}
+	if (unlikely(p->des01.tx.heartbeat_fail)) {
+		x->tx_heartbeat++;
+		stats->tx_heartbeat_errors++;
+		ret = -1;
+	}
+	if (unlikely(p->des01.tx.deferred))
+		x->tx_deferred++;
+
+	return ret;
+}
+
+static int dwmac100_get_tx_len(struct dma_desc *p)
+{
+	return p->des01.tx.buffer1_size;
+}
+
+/* This function verifies if each incoming frame has some errors
+ * and, if required, updates the multicast statistics.
+ * In case of success, it returns csum_none becasue the device
+ * is not able to compute the csum in HW. */
+static int dwmac100_get_rx_frame_status(void *data,
+				      struct stmmac_extra_stats *x,
+				      struct dma_desc *p)
+{
+	int ret = csum_none;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.rx.last_descriptor == 0)) {
+		pr_warning("dwmac100 Error: Oversized Ethernet "
+			   "frame spanned multiple buffers\n");
+		stats->rx_length_errors++;
+		return discard_frame;
+	}
+
+	if (unlikely(p->des01.rx.error_summary)) {
+		if (unlikely(p->des01.rx.descriptor_error))
+			x->rx_desc++;
+		if (unlikely(p->des01.rx.partial_frame_error))
+			x->rx_partial++;
+		if (unlikely(p->des01.rx.run_frame))
+			x->rx_runt++;
+		if (unlikely(p->des01.rx.frame_too_long))
+			x->rx_toolong++;
+		if (unlikely(p->des01.rx.collision)) {
+			x->rx_collision++;
+			stats->collisions++;
+		}
+		if (unlikely(p->des01.rx.crc_error)) {
+			x->rx_crc++;
+			stats->rx_crc_errors++;
+		}
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.rx.dribbling))
+		ret = discard_frame;
+
+	if (unlikely(p->des01.rx.length_error)) {
+		x->rx_lenght++;
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.rx.mii_error)) {
+		x->rx_mii++;
+		ret = discard_frame;
+	}
+	if (p->des01.rx.multicast_frame) {
+		x->rx_multicast++;
+		stats->multicast++;
+	}
+	return ret;
+}
+
+static void dwmac100_irq_status(unsigned long ioaddr)
+{
+	return;
+}
+
+static void dwmac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+			  unsigned int reg_n)
+{
+	stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void dwmac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+			  unsigned int reg_n)
+{
+	stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void dwmac100_set_filter(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	u32 value = readl(ioaddr + MAC_CONTROL);
+
+	if (dev->flags & IFF_PROMISC) {
+		value |= MAC_CONTROL_PR;
+		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
+			   MAC_CONTROL_HP);
+	} else if ((dev->mc_count > HASH_TABLE_SIZE)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		value |= MAC_CONTROL_PM;
+		value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
+		writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
+		writel(0xffffffff, ioaddr + MAC_HASH_LOW);
+	} else if (dev->mc_count == 0) {	/* no multicast */
+		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
+			   MAC_CONTROL_HO | MAC_CONTROL_HP);
+	} else {
+		int i;
+		u32 mc_filter[2];
+		struct dev_mc_list *mclist;
+
+		/* Perfect filter mode for physical address and Hash
+		   filter for multicast */
+		value |= MAC_CONTROL_HP;
+		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR |
+			   MAC_CONTROL_IF | MAC_CONTROL_HO);
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+			/* The upper 6 bits of the calculated CRC are used to
+			 * index the contens of the hash table */
+			int bit_nr =
+			    ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+			/* The most significant bit determines the register to
+			 * use (H/L) while the other 5 bits determine the bit
+			 * within the register. */
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		writel(mc_filter[0], ioaddr + MAC_HASH_LOW);
+		writel(mc_filter[1], ioaddr + MAC_HASH_HIGH);
+	}
+
+	writel(value, ioaddr + MAC_CONTROL);
+
+	DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: "
+	    "HI 0x%08x, LO 0x%08x\n",
+	    __func__, readl(ioaddr + MAC_CONTROL),
+	    readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW));
+	return;
+}
+
+static void dwmac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+			     unsigned int fc, unsigned int pause_time)
+{
+	unsigned int flow = MAC_FLOW_CTRL_ENABLE;
+
+	if (duplex)
+		flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT);
+	writel(flow, ioaddr + MAC_FLOW_CTRL);
+
+	return;
+}
+
+/* No PMT module supported for this Ethernet Controller.
+ * Tested on ST platforms only.
+ */
+static void dwmac100_pmt(unsigned long ioaddr, unsigned long mode)
+{
+	return;
+}
+
+static void dwmac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
+				int disable_rx_ic)
+{
+	int i;
+	for (i = 0; i < ring_size; i++) {
+		p->des01.rx.own = 1;
+		p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
+		if (i == ring_size - 1)
+			p->des01.rx.end_ring = 1;
+		if (disable_rx_ic)
+			p->des01.rx.disable_ic = 1;
+		p++;
+	}
+	return;
+}
+
+static void dwmac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+	int i;
+	for (i = 0; i < ring_size; i++) {
+		p->des01.tx.own = 0;
+		if (i == ring_size - 1)
+			p->des01.tx.end_ring = 1;
+		p++;
+	}
+	return;
+}
+
+static int dwmac100_get_tx_owner(struct dma_desc *p)
+{
+	return p->des01.tx.own;
+}
+
+static int dwmac100_get_rx_owner(struct dma_desc *p)
+{
+	return p->des01.rx.own;
+}
+
+static void dwmac100_set_tx_owner(struct dma_desc *p)
+{
+	p->des01.tx.own = 1;
+}
+
+static void dwmac100_set_rx_owner(struct dma_desc *p)
+{
+	p->des01.rx.own = 1;
+}
+
+static int dwmac100_get_tx_ls(struct dma_desc *p)
+{
+	return p->des01.tx.last_segment;
+}
+
+static void dwmac100_release_tx_desc(struct dma_desc *p)
+{
+	int ter = p->des01.tx.end_ring;
+
+	/* clean field used within the xmit */
+	p->des01.tx.first_segment = 0;
+	p->des01.tx.last_segment = 0;
+	p->des01.tx.buffer1_size = 0;
+
+	/* clean status reported */
+	p->des01.tx.error_summary = 0;
+	p->des01.tx.underflow_error = 0;
+	p->des01.tx.no_carrier = 0;
+	p->des01.tx.loss_carrier = 0;
+	p->des01.tx.excessive_deferral = 0;
+	p->des01.tx.excessive_collisions = 0;
+	p->des01.tx.late_collision = 0;
+	p->des01.tx.heartbeat_fail = 0;
+	p->des01.tx.deferred = 0;
+
+	/* set termination field */
+	p->des01.tx.end_ring = ter;
+
+	return;
+}
+
+static void dwmac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+				   int csum_flag)
+{
+	p->des01.tx.first_segment = is_fs;
+	p->des01.tx.buffer1_size = len;
+}
+
+static void dwmac100_clear_tx_ic(struct dma_desc *p)
+{
+	p->des01.tx.interrupt = 0;
+}
+
+static void dwmac100_close_tx_desc(struct dma_desc *p)
+{
+	p->des01.tx.last_segment = 1;
+	p->des01.tx.interrupt = 1;
+}
+
+static int dwmac100_get_rx_frame_len(struct dma_desc *p)
+{
+	return p->des01.rx.frame_length;
+}
+
+struct stmmac_ops dwmac100_ops = {
+	.core_init = dwmac100_core_init,
+	.dump_regs = dwmac100_dump_mac_regs,
+	.host_irq_status = dwmac100_irq_status,
+	.set_filter = dwmac100_set_filter,
+	.flow_ctrl = dwmac100_flow_ctrl,
+	.pmt = dwmac100_pmt,
+	.set_umac_addr = dwmac100_set_umac_addr,
+	.get_umac_addr = dwmac100_get_umac_addr,
+};
+
+struct stmmac_dma_ops dwmac100_dma_ops = {
+	.init = dwmac100_dma_init,
+	.dump_regs = dwmac100_dump_dma_regs,
+	.dma_mode = dwmac100_dma_operation_mode,
+	.dma_diagnostic_fr = dwmac100_dma_diagnostic_fr,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
+};
+
+struct stmmac_desc_ops dwmac100_desc_ops = {
+	.tx_status = dwmac100_get_tx_frame_status,
+	.rx_status = dwmac100_get_rx_frame_status,
+	.get_tx_len = dwmac100_get_tx_len,
+	.init_rx_desc = dwmac100_init_rx_desc,
+	.init_tx_desc = dwmac100_init_tx_desc,
+	.get_tx_owner = dwmac100_get_tx_owner,
+	.get_rx_owner = dwmac100_get_rx_owner,
+	.release_tx_desc = dwmac100_release_tx_desc,
+	.prepare_tx_desc = dwmac100_prepare_tx_desc,
+	.clear_tx_ic = dwmac100_clear_tx_ic,
+	.close_tx_desc = dwmac100_close_tx_desc,
+	.get_tx_ls = dwmac100_get_tx_ls,
+	.set_tx_owner = dwmac100_set_tx_owner,
+	.set_rx_owner = dwmac100_set_rx_owner,
+	.get_rx_frame_len = dwmac100_get_rx_frame_len,
+};
+
+struct mac_device_info *dwmac100_setup(unsigned long ioaddr)
+{
+	struct mac_device_info *mac;
+
+	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+
+	pr_info("\tDWMAC100\n");
+
+	mac->mac = &dwmac100_ops;
+	mac->desc = &dwmac100_desc_ops;
+	mac->dma = &dwmac100_dma_ops;
+
+	mac->pmt = PMT_NOT_SUPPORTED;
+	mac->link.port = MAC_CONTROL_PS;
+	mac->link.duplex = MAC_CONTROL_F;
+	mac->link.speed = 0;
+	mac->mii.addr = MAC_MII_ADDR;
+	mac->mii.data = MAC_MII_DATA;
+
+	return mac;
+}
diff --git a/drivers/net/stmmac/dwmac100.h b/drivers/net/stmmac/dwmac100.h
new file mode 100644
index 000000000000..0f8f110d004a
--- /dev/null
+++ b/drivers/net/stmmac/dwmac100.h
@@ -0,0 +1,116 @@
+/*******************************************************************************
+  MAC 10/100 Header File
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+/*----------------------------------------------------------------------------
+ *	 			MAC BLOCK defines
+ *---------------------------------------------------------------------------*/
+/* MAC CSR offset */
+#define MAC_CONTROL	0x00000000	/* MAC Control */
+#define MAC_ADDR_HIGH	0x00000004	/* MAC Address High */
+#define MAC_ADDR_LOW	0x00000008	/* MAC Address Low */
+#define MAC_HASH_HIGH	0x0000000c	/* Multicast Hash Table High */
+#define MAC_HASH_LOW	0x00000010	/* Multicast Hash Table Low */
+#define MAC_MII_ADDR	0x00000014	/* MII Address */
+#define MAC_MII_DATA	0x00000018	/* MII Data */
+#define MAC_FLOW_CTRL	0x0000001c	/* Flow Control */
+#define MAC_VLAN1	0x00000020	/* VLAN1 Tag */
+#define MAC_VLAN2	0x00000024	/* VLAN2 Tag */
+
+/* MAC CTRL defines */
+#define MAC_CONTROL_RA	0x80000000	/* Receive All Mode */
+#define MAC_CONTROL_BLE	0x40000000	/* Endian Mode */
+#define MAC_CONTROL_HBD	0x10000000	/* Heartbeat Disable */
+#define MAC_CONTROL_PS	0x08000000	/* Port Select */
+#define MAC_CONTROL_DRO	0x00800000	/* Disable Receive Own */
+#define MAC_CONTROL_EXT_LOOPBACK 0x00400000	/* Reserved (ext loopback?) */
+#define MAC_CONTROL_OM	0x00200000	/* Loopback Operating Mode */
+#define MAC_CONTROL_F	0x00100000	/* Full Duplex Mode */
+#define MAC_CONTROL_PM	0x00080000	/* Pass All Multicast */
+#define MAC_CONTROL_PR	0x00040000	/* Promiscuous Mode */
+#define MAC_CONTROL_IF	0x00020000	/* Inverse Filtering */
+#define MAC_CONTROL_PB	0x00010000	/* Pass Bad Frames */
+#define MAC_CONTROL_HO	0x00008000	/* Hash Only Filtering Mode */
+#define MAC_CONTROL_HP	0x00002000	/* Hash/Perfect Filtering Mode */
+#define MAC_CONTROL_LCC	0x00001000	/* Late Collision Control */
+#define MAC_CONTROL_DBF	0x00000800	/* Disable Broadcast Frames */
+#define MAC_CONTROL_DRTY	0x00000400	/* Disable Retry */
+#define MAC_CONTROL_ASTP	0x00000100	/* Automatic Pad Stripping */
+#define MAC_CONTROL_BOLMT_10	0x00000000	/* Back Off Limit 10 */
+#define MAC_CONTROL_BOLMT_8	0x00000040	/* Back Off Limit 8 */
+#define MAC_CONTROL_BOLMT_4	0x00000080	/* Back Off Limit 4 */
+#define MAC_CONTROL_BOLMT_1	0x000000c0	/* Back Off Limit 1 */
+#define MAC_CONTROL_DC		0x00000020	/* Deferral Check */
+#define MAC_CONTROL_TE		0x00000008	/* Transmitter Enable */
+#define MAC_CONTROL_RE		0x00000004	/* Receiver Enable */
+
+#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP)
+
+/* MAC FLOW CTRL defines */
+#define MAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
+#define MAC_FLOW_CTRL_PT_SHIFT	16
+#define MAC_FLOW_CTRL_PASS	0x00000004	/* Pass Control Frames */
+#define MAC_FLOW_CTRL_ENABLE	0x00000002	/* Flow Control Enable */
+#define MAC_FLOW_CTRL_PAUSE	0x00000001	/* Flow Control Busy ... */
+
+/* MII ADDR  defines */
+#define MAC_MII_ADDR_WRITE	0x00000002	/* MII Write */
+#define MAC_MII_ADDR_BUSY	0x00000001	/* MII Busy */
+
+/*----------------------------------------------------------------------------
+ * 				DMA BLOCK defines
+ *---------------------------------------------------------------------------*/
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_DBO	0x00100000	/* Descriptor Byte Ordering */
+#define DMA_BUS_MODE_BLE	0x00000080	/* Big Endian/Little Endian */
+#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT	8
+#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT	2	/*   (in DWORDS)      */
+#define DMA_BUS_MODE_BAR_BUS	0x00000002	/* Bar-Bus Arbitration */
+#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
+#define DMA_BUS_MODE_DEFAULT	0x00000000
+
+/* DMA Control register defines */
+#define DMA_CONTROL_SF		0x00200000	/* Store And Forward */
+
+/* Transmit Threshold Control */
+enum ttc_control {
+	DMA_CONTROL_TTC_DEFAULT = 0x00000000,	/* Threshold is 32 DWORDS */
+	DMA_CONTROL_TTC_64 = 0x00004000,	/* Threshold is 64 DWORDS */
+	DMA_CONTROL_TTC_128 = 0x00008000,	/* Threshold is 128 DWORDS */
+	DMA_CONTROL_TTC_256 = 0x0000c000,	/* Threshold is 256 DWORDS */
+	DMA_CONTROL_TTC_18 = 0x00400000,	/* Threshold is 18 DWORDS */
+	DMA_CONTROL_TTC_24 = 0x00404000,	/* Threshold is 24 DWORDS */
+	DMA_CONTROL_TTC_32 = 0x00408000,	/* Threshold is 32 DWORDS */
+	DMA_CONTROL_TTC_40 = 0x0040c000,	/* Threshold is 40 DWORDS */
+	DMA_CONTROL_SE = 0x00000008,	/* Stop On Empty */
+	DMA_CONTROL_OSF = 0x00000004,	/* Operate On 2nd Frame */
+};
+
+/* STMAC110 DMA Missed Frame Counter register defines */
+#define DMA_MISSED_FRAME_OVE	0x10000000	/* FIFO Overflow Overflow */
+#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000	/* Overflow Frame Counter */
+#define DMA_MISSED_FRAME_OVE_M	0x00010000	/* Missed Frame Overflow */
+#define DMA_MISSED_FRAME_M_CNTR	0x0000ffff	/* Missed Frame Couinter */
diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c
deleted file mode 100644
index b675f7c67f6e..000000000000
--- a/drivers/net/stmmac/mac100.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*******************************************************************************
-  This is the driver for the MAC 10/100 on-chip Ethernet controller
-  currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
-
-  DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
-  this code.
-
-  Copyright (C) 2007-2009  STMicroelectronics Ltd
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
-*******************************************************************************/
-
-#include <linux/netdevice.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-
-#include "common.h"
-#include "mac100.h"
-#include "dwmac_dma.h"
-
-#undef MAC100_DEBUG
-/*#define MAC100_DEBUG*/
-#ifdef MAC100_DEBUG
-#define DBG(fmt, args...)  printk(fmt, ## args)
-#else
-#define DBG(fmt, args...)  do { } while (0)
-#endif
-
-static void mac100_core_init(unsigned long ioaddr)
-{
-	u32 value = readl(ioaddr + MAC_CONTROL);
-
-	writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL);
-
-#ifdef STMMAC_VLAN_TAG_USED
-	writel(ETH_P_8021Q, ioaddr + MAC_VLAN1);
-#endif
-	return;
-}
-
-static void mac100_dump_mac_regs(unsigned long ioaddr)
-{
-	pr_info("\t----------------------------------------------\n"
-	       "\t  MAC100 CSR (base addr = 0x%8x)\n"
-	       "\t----------------------------------------------\n",
-	       (unsigned int)ioaddr);
-	pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
-	       readl(ioaddr + MAC_CONTROL));
-	pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
-	       readl(ioaddr + MAC_ADDR_HIGH));
-	pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
-	       readl(ioaddr + MAC_ADDR_LOW));
-	pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
-			MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
-	pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
-			MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
-	pr_info("\tflow control (offset 0x%x): 0x%08x\n",
-		MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
-	pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
-	       readl(ioaddr + MAC_VLAN1));
-	pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
-	       readl(ioaddr + MAC_VLAN2));
-	pr_info("\n\tMAC management counter registers\n");
-	pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n",
-	       MMC_CONTROL, readl(ioaddr + MMC_CONTROL));
-	pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n",
-	       MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR));
-	pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n",
-	       MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR));
-	pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n",
-	       MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK));
-	pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n",
-	       MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK));
-	return;
-}
-
-static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
-			   u32 dma_rx)
-{
-	u32 value = readl(ioaddr + DMA_BUS_MODE);
-	/* DMA SW reset */
-	value |= DMA_BUS_MODE_SFT_RESET;
-	writel(value, ioaddr + DMA_BUS_MODE);
-	do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
-
-	/* Enable Application Access by writing to DMA CSR0 */
-	writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
-	       ioaddr + DMA_BUS_MODE);
-
-	/* Mask interrupts by writing to CSR7 */
-	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
-
-	/* The base address of the RX/TX descriptor lists must be written into
-	 * DMA CSR3 and CSR4, respectively. */
-	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
-	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
-
-	return 0;
-}
-
-/* Store and Forward capability is not used at all..
- * The transmit threshold can be programmed by
- * setting the TTC bits in the DMA control register.*/
-static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode,
-				      int rxmode)
-{
-	u32 csr6 = readl(ioaddr + DMA_CONTROL);
-
-	if (txmode <= 32)
-		csr6 |= DMA_CONTROL_TTC_32;
-	else if (txmode <= 64)
-		csr6 |= DMA_CONTROL_TTC_64;
-	else
-		csr6 |= DMA_CONTROL_TTC_128;
-
-	writel(csr6, ioaddr + DMA_CONTROL);
-
-	return;
-}
-
-static void mac100_dump_dma_regs(unsigned long ioaddr)
-{
-	int i;
-
-	DBG(KERN_DEBUG "MAC100 DMA CSR \n");
-	for (i = 0; i < 9; i++)
-		pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
-		       (DMA_BUS_MODE + i * 4),
-		       readl(ioaddr + DMA_BUS_MODE + i * 4));
-	DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n",
-	    DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR));
-	DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n",
-	    DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
-	return;
-}
-
-/* DMA controller has two counters to track the number of
-   the receive missed frames. */
-static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
-				     unsigned long ioaddr)
-{
-	struct net_device_stats *stats = (struct net_device_stats *)data;
-	u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
-
-	if (unlikely(csr8)) {
-		if (csr8 & DMA_MISSED_FRAME_OVE) {
-			stats->rx_over_errors += 0x800;
-			x->rx_overflow_cntr += 0x800;
-		} else {
-			unsigned int ove_cntr;
-			ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17);
-			stats->rx_over_errors += ove_cntr;
-			x->rx_overflow_cntr += ove_cntr;
-		}
-
-		if (csr8 & DMA_MISSED_FRAME_OVE_M) {
-			stats->rx_missed_errors += 0xffff;
-			x->rx_missed_cntr += 0xffff;
-		} else {
-			unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR);
-			stats->rx_missed_errors += miss_f;
-			x->rx_missed_cntr += miss_f;
-		}
-	}
-	return;
-}
-
-static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
-				      struct dma_desc *p, unsigned long ioaddr)
-{
-	int ret = 0;
-	struct net_device_stats *stats = (struct net_device_stats *)data;
-
-	if (unlikely(p->des01.tx.error_summary)) {
-		if (unlikely(p->des01.tx.underflow_error)) {
-			x->tx_underflow++;
-			stats->tx_fifo_errors++;
-		}
-		if (unlikely(p->des01.tx.no_carrier)) {
-			x->tx_carrier++;
-			stats->tx_carrier_errors++;
-		}
-		if (unlikely(p->des01.tx.loss_carrier)) {
-			x->tx_losscarrier++;
-			stats->tx_carrier_errors++;
-		}
-		if (unlikely((p->des01.tx.excessive_deferral) ||
-			     (p->des01.tx.excessive_collisions) ||
-			     (p->des01.tx.late_collision)))
-			stats->collisions += p->des01.tx.collision_count;
-		ret = -1;
-	}
-	if (unlikely(p->des01.tx.heartbeat_fail)) {
-		x->tx_heartbeat++;
-		stats->tx_heartbeat_errors++;
-		ret = -1;
-	}
-	if (unlikely(p->des01.tx.deferred))
-		x->tx_deferred++;
-
-	return ret;
-}
-
-static int mac100_get_tx_len(struct dma_desc *p)
-{
-	return p->des01.tx.buffer1_size;
-}
-
-/* This function verifies if each incoming frame has some errors
- * and, if required, updates the multicast statistics.
- * In case of success, it returns csum_none becasue the device
- * is not able to compute the csum in HW. */
-static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
-				      struct dma_desc *p)
-{
-	int ret = csum_none;
-	struct net_device_stats *stats = (struct net_device_stats *)data;
-
-	if (unlikely(p->des01.rx.last_descriptor == 0)) {
-		pr_warning("mac100 Error: Oversized Ethernet "
-			   "frame spanned multiple buffers\n");
-		stats->rx_length_errors++;
-		return discard_frame;
-	}
-
-	if (unlikely(p->des01.rx.error_summary)) {
-		if (unlikely(p->des01.rx.descriptor_error))
-			x->rx_desc++;
-		if (unlikely(p->des01.rx.partial_frame_error))
-			x->rx_partial++;
-		if (unlikely(p->des01.rx.run_frame))
-			x->rx_runt++;
-		if (unlikely(p->des01.rx.frame_too_long))
-			x->rx_toolong++;
-		if (unlikely(p->des01.rx.collision)) {
-			x->rx_collision++;
-			stats->collisions++;
-		}
-		if (unlikely(p->des01.rx.crc_error)) {
-			x->rx_crc++;
-			stats->rx_crc_errors++;
-		}
-		ret = discard_frame;
-	}
-	if (unlikely(p->des01.rx.dribbling))
-		ret = discard_frame;
-
-	if (unlikely(p->des01.rx.length_error)) {
-		x->rx_lenght++;
-		ret = discard_frame;
-	}
-	if (unlikely(p->des01.rx.mii_error)) {
-		x->rx_mii++;
-		ret = discard_frame;
-	}
-	if (p->des01.rx.multicast_frame) {
-		x->rx_multicast++;
-		stats->multicast++;
-	}
-	return ret;
-}
-
-static void mac100_irq_status(unsigned long ioaddr)
-{
-	return;
-}
-
-static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
-			  unsigned int reg_n)
-{
-	stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
-}
-
-static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
-			  unsigned int reg_n)
-{
-	stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
-}
-
-static void mac100_set_filter(struct net_device *dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	u32 value = readl(ioaddr + MAC_CONTROL);
-
-	if (dev->flags & IFF_PROMISC) {
-		value |= MAC_CONTROL_PR;
-		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
-			   MAC_CONTROL_HP);
-	} else if ((dev->mc_count > HASH_TABLE_SIZE)
-		   || (dev->flags & IFF_ALLMULTI)) {
-		value |= MAC_CONTROL_PM;
-		value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
-		writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
-		writel(0xffffffff, ioaddr + MAC_HASH_LOW);
-	} else if (dev->mc_count == 0) {	/* no multicast */
-		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
-			   MAC_CONTROL_HO | MAC_CONTROL_HP);
-	} else {
-		int i;
-		u32 mc_filter[2];
-		struct dev_mc_list *mclist;
-
-		/* Perfect filter mode for physical address and Hash
-		   filter for multicast */
-		value |= MAC_CONTROL_HP;
-		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF
-			   | MAC_CONTROL_HO);
-
-		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
-			/* The upper 6 bits of the calculated CRC are used to
-			 * index the contens of the hash table */
-			int bit_nr =
-			    ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
-			/* The most significant bit determines the register to
-			 * use (H/L) while the other 5 bits determine the bit
-			 * within the register. */
-			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-		}
-		writel(mc_filter[0], ioaddr + MAC_HASH_LOW);
-		writel(mc_filter[1], ioaddr + MAC_HASH_HIGH);
-	}
-
-	writel(value, ioaddr + MAC_CONTROL);
-
-	DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: "
-	    "HI 0x%08x, LO 0x%08x\n",
-	    __func__, readl(ioaddr + MAC_CONTROL),
-	    readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW));
-	return;
-}
-
-static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
-			     unsigned int fc, unsigned int pause_time)
-{
-	unsigned int flow = MAC_FLOW_CTRL_ENABLE;
-
-	if (duplex)
-		flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT);
-	writel(flow, ioaddr + MAC_FLOW_CTRL);
-
-	return;
-}
-
-/* No PMT module supported in our SoC  for the Ethernet Controller. */
-static void mac100_pmt(unsigned long ioaddr, unsigned long mode)
-{
-	return;
-}
-
-static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
-				int disable_rx_ic)
-{
-	int i;
-	for (i = 0; i < ring_size; i++) {
-		p->des01.rx.own = 1;
-		p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
-		if (i == ring_size - 1)
-			p->des01.rx.end_ring = 1;
-		if (disable_rx_ic)
-			p->des01.rx.disable_ic = 1;
-		p++;
-	}
-	return;
-}
-
-static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
-{
-	int i;
-	for (i = 0; i < ring_size; i++) {
-		p->des01.tx.own = 0;
-		if (i == ring_size - 1)
-			p->des01.tx.end_ring = 1;
-		p++;
-	}
-	return;
-}
-
-static int mac100_get_tx_owner(struct dma_desc *p)
-{
-	return p->des01.tx.own;
-}
-
-static int mac100_get_rx_owner(struct dma_desc *p)
-{
-	return p->des01.rx.own;
-}
-
-static void mac100_set_tx_owner(struct dma_desc *p)
-{
-	p->des01.tx.own = 1;
-}
-
-static void mac100_set_rx_owner(struct dma_desc *p)
-{
-	p->des01.rx.own = 1;
-}
-
-static int mac100_get_tx_ls(struct dma_desc *p)
-{
-	return p->des01.tx.last_segment;
-}
-
-static void mac100_release_tx_desc(struct dma_desc *p)
-{
-	int ter = p->des01.tx.end_ring;
-
-	/* clean field used within the xmit */
-	p->des01.tx.first_segment = 0;
-	p->des01.tx.last_segment = 0;
-	p->des01.tx.buffer1_size = 0;
-
-	/* clean status reported */
-	p->des01.tx.error_summary = 0;
-	p->des01.tx.underflow_error = 0;
-	p->des01.tx.no_carrier = 0;
-	p->des01.tx.loss_carrier = 0;
-	p->des01.tx.excessive_deferral = 0;
-	p->des01.tx.excessive_collisions = 0;
-	p->des01.tx.late_collision = 0;
-	p->des01.tx.heartbeat_fail = 0;
-	p->des01.tx.deferred = 0;
-
-	/* set termination field */
-	p->des01.tx.end_ring = ter;
-
-	return;
-}
-
-static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
-				   int csum_flag)
-{
-	p->des01.tx.first_segment = is_fs;
-	p->des01.tx.buffer1_size = len;
-}
-
-static void mac100_clear_tx_ic(struct dma_desc *p)
-{
-	p->des01.tx.interrupt = 0;
-}
-
-static void mac100_close_tx_desc(struct dma_desc *p)
-{
-	p->des01.tx.last_segment = 1;
-	p->des01.tx.interrupt = 1;
-}
-
-static int mac100_get_rx_frame_len(struct dma_desc *p)
-{
-	return p->des01.rx.frame_length;
-}
-
-struct stmmac_ops mac100_ops = {
-	.core_init = mac100_core_init,
-	.dump_regs = mac100_dump_mac_regs,
-	.host_irq_status = mac100_irq_status,
-	.set_filter = mac100_set_filter,
-	.flow_ctrl = mac100_flow_ctrl,
-	.pmt = mac100_pmt,
-	.set_umac_addr = mac100_set_umac_addr,
-	.get_umac_addr = mac100_get_umac_addr,
-};
-
-struct stmmac_dma_ops mac100_dma_ops = {
-	.init = mac100_dma_init,
-	.dump_regs = mac100_dump_dma_regs,
-	.dma_mode = mac100_dma_operation_mode,
-	.dma_diagnostic_fr = mac100_dma_diagnostic_fr,
-	.enable_dma_transmission = dwmac_enable_dma_transmission,
-	.enable_dma_irq = dwmac_enable_dma_irq,
-	.disable_dma_irq = dwmac_disable_dma_irq,
-	.start_tx = dwmac_dma_start_tx,
-	.stop_tx = dwmac_dma_stop_tx,
-	.start_rx = dwmac_dma_start_rx,
-	.stop_rx = dwmac_dma_stop_rx,
-	.dma_interrupt = dwmac_dma_interrupt,
-};
-
-struct stmmac_desc_ops mac100_desc_ops = {
-	.tx_status = mac100_get_tx_frame_status,
-	.rx_status = mac100_get_rx_frame_status,
-	.get_tx_len = mac100_get_tx_len,
-	.init_rx_desc = mac100_init_rx_desc,
-	.init_tx_desc = mac100_init_tx_desc,
-	.get_tx_owner = mac100_get_tx_owner,
-	.get_rx_owner = mac100_get_rx_owner,
-	.release_tx_desc = mac100_release_tx_desc,
-	.prepare_tx_desc = mac100_prepare_tx_desc,
-	.clear_tx_ic = mac100_clear_tx_ic,
-	.close_tx_desc = mac100_close_tx_desc,
-	.get_tx_ls = mac100_get_tx_ls,
-	.set_tx_owner = mac100_set_tx_owner,
-	.set_rx_owner = mac100_set_rx_owner,
-	.get_rx_frame_len = mac100_get_rx_frame_len,
-};
-
-struct mac_device_info *mac100_setup(unsigned long ioaddr)
-{
-	struct mac_device_info *mac;
-
-	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
-
-	pr_info("\tMAC 10/100\n");
-
-	mac->mac = &mac100_ops;
-	mac->desc = &mac100_desc_ops;
-	mac->dma = &mac100_dma_ops;
-
-	mac->pmt = PMT_NOT_SUPPORTED;
-	mac->link.port = MAC_CONTROL_PS;
-	mac->link.duplex = MAC_CONTROL_F;
-	mac->link.speed = 0;
-	mac->mii.addr = MAC_MII_ADDR;
-	mac->mii.data = MAC_MII_DATA;
-
-	return mac;
-}
diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h
deleted file mode 100644
index 0f8f110d004a..000000000000
--- a/drivers/net/stmmac/mac100.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*******************************************************************************
-  MAC 10/100 Header File
-
-  Copyright (C) 2007-2009  STMicroelectronics Ltd
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
-*******************************************************************************/
-
-/*----------------------------------------------------------------------------
- *	 			MAC BLOCK defines
- *---------------------------------------------------------------------------*/
-/* MAC CSR offset */
-#define MAC_CONTROL	0x00000000	/* MAC Control */
-#define MAC_ADDR_HIGH	0x00000004	/* MAC Address High */
-#define MAC_ADDR_LOW	0x00000008	/* MAC Address Low */
-#define MAC_HASH_HIGH	0x0000000c	/* Multicast Hash Table High */
-#define MAC_HASH_LOW	0x00000010	/* Multicast Hash Table Low */
-#define MAC_MII_ADDR	0x00000014	/* MII Address */
-#define MAC_MII_DATA	0x00000018	/* MII Data */
-#define MAC_FLOW_CTRL	0x0000001c	/* Flow Control */
-#define MAC_VLAN1	0x00000020	/* VLAN1 Tag */
-#define MAC_VLAN2	0x00000024	/* VLAN2 Tag */
-
-/* MAC CTRL defines */
-#define MAC_CONTROL_RA	0x80000000	/* Receive All Mode */
-#define MAC_CONTROL_BLE	0x40000000	/* Endian Mode */
-#define MAC_CONTROL_HBD	0x10000000	/* Heartbeat Disable */
-#define MAC_CONTROL_PS	0x08000000	/* Port Select */
-#define MAC_CONTROL_DRO	0x00800000	/* Disable Receive Own */
-#define MAC_CONTROL_EXT_LOOPBACK 0x00400000	/* Reserved (ext loopback?) */
-#define MAC_CONTROL_OM	0x00200000	/* Loopback Operating Mode */
-#define MAC_CONTROL_F	0x00100000	/* Full Duplex Mode */
-#define MAC_CONTROL_PM	0x00080000	/* Pass All Multicast */
-#define MAC_CONTROL_PR	0x00040000	/* Promiscuous Mode */
-#define MAC_CONTROL_IF	0x00020000	/* Inverse Filtering */
-#define MAC_CONTROL_PB	0x00010000	/* Pass Bad Frames */
-#define MAC_CONTROL_HO	0x00008000	/* Hash Only Filtering Mode */
-#define MAC_CONTROL_HP	0x00002000	/* Hash/Perfect Filtering Mode */
-#define MAC_CONTROL_LCC	0x00001000	/* Late Collision Control */
-#define MAC_CONTROL_DBF	0x00000800	/* Disable Broadcast Frames */
-#define MAC_CONTROL_DRTY	0x00000400	/* Disable Retry */
-#define MAC_CONTROL_ASTP	0x00000100	/* Automatic Pad Stripping */
-#define MAC_CONTROL_BOLMT_10	0x00000000	/* Back Off Limit 10 */
-#define MAC_CONTROL_BOLMT_8	0x00000040	/* Back Off Limit 8 */
-#define MAC_CONTROL_BOLMT_4	0x00000080	/* Back Off Limit 4 */
-#define MAC_CONTROL_BOLMT_1	0x000000c0	/* Back Off Limit 1 */
-#define MAC_CONTROL_DC		0x00000020	/* Deferral Check */
-#define MAC_CONTROL_TE		0x00000008	/* Transmitter Enable */
-#define MAC_CONTROL_RE		0x00000004	/* Receiver Enable */
-
-#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP)
-
-/* MAC FLOW CTRL defines */
-#define MAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
-#define MAC_FLOW_CTRL_PT_SHIFT	16
-#define MAC_FLOW_CTRL_PASS	0x00000004	/* Pass Control Frames */
-#define MAC_FLOW_CTRL_ENABLE	0x00000002	/* Flow Control Enable */
-#define MAC_FLOW_CTRL_PAUSE	0x00000001	/* Flow Control Busy ... */
-
-/* MII ADDR  defines */
-#define MAC_MII_ADDR_WRITE	0x00000002	/* MII Write */
-#define MAC_MII_ADDR_BUSY	0x00000001	/* MII Busy */
-
-/*----------------------------------------------------------------------------
- * 				DMA BLOCK defines
- *---------------------------------------------------------------------------*/
-
-/* DMA Bus Mode register defines */
-#define DMA_BUS_MODE_DBO	0x00100000	/* Descriptor Byte Ordering */
-#define DMA_BUS_MODE_BLE	0x00000080	/* Big Endian/Little Endian */
-#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
-#define DMA_BUS_MODE_PBL_SHIFT	8
-#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
-#define DMA_BUS_MODE_DSL_SHIFT	2	/*   (in DWORDS)      */
-#define DMA_BUS_MODE_BAR_BUS	0x00000002	/* Bar-Bus Arbitration */
-#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
-#define DMA_BUS_MODE_DEFAULT	0x00000000
-
-/* DMA Control register defines */
-#define DMA_CONTROL_SF		0x00200000	/* Store And Forward */
-
-/* Transmit Threshold Control */
-enum ttc_control {
-	DMA_CONTROL_TTC_DEFAULT = 0x00000000,	/* Threshold is 32 DWORDS */
-	DMA_CONTROL_TTC_64 = 0x00004000,	/* Threshold is 64 DWORDS */
-	DMA_CONTROL_TTC_128 = 0x00008000,	/* Threshold is 128 DWORDS */
-	DMA_CONTROL_TTC_256 = 0x0000c000,	/* Threshold is 256 DWORDS */
-	DMA_CONTROL_TTC_18 = 0x00400000,	/* Threshold is 18 DWORDS */
-	DMA_CONTROL_TTC_24 = 0x00404000,	/* Threshold is 24 DWORDS */
-	DMA_CONTROL_TTC_32 = 0x00408000,	/* Threshold is 32 DWORDS */
-	DMA_CONTROL_TTC_40 = 0x0040c000,	/* Threshold is 40 DWORDS */
-	DMA_CONTROL_SE = 0x00000008,	/* Stop On Empty */
-	DMA_CONTROL_OSF = 0x00000004,	/* Operate On 2nd Frame */
-};
-
-/* STMAC110 DMA Missed Frame Counter register defines */
-#define DMA_MISSED_FRAME_OVE	0x10000000	/* FIFO Overflow Overflow */
-#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000	/* Overflow Frame Counter */
-#define DMA_MISSED_FRAME_OVE_M	0x00010000	/* Missed Frame Overflow */
-#define DMA_MISSED_FRAME_M_CNTR	0x0000ffff	/* Missed Frame Couinter */
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index e6c5a3cf4af2..e79e00b6f147 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1585,7 +1585,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 	if (priv->is_gmac)
 		device = gmac_setup(ioaddr);
 	else
-		device = mac100_setup(ioaddr);
+		device = dwmac100_setup(ioaddr);
 
 	if (!device)
 		return -ENOMEM;
-- 
cgit v1.2.3


From 21d437cc66dcfd0119a4905214fbbe19f3e276dc Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:20 +0000
Subject: stmmac: rename the gmac as dwmac1000 and split core and dma parts

Use dwmac1000 naming instead of gmac.
The patch also splits the gmac.c file in two new ones:
dwmac1000_core.c and dwmac1000_dma.c.
This could actually help on some architectures where different
DMA engines are used.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/Makefile         |   5 +-
 drivers/net/stmmac/common.h         |   2 +-
 drivers/net/stmmac/descs.h          |   4 +-
 drivers/net/stmmac/dwmac1000.h      | 221 ++++++++++++
 drivers/net/stmmac/dwmac1000_core.c | 245 +++++++++++++
 drivers/net/stmmac/dwmac1000_dma.c  | 474 ++++++++++++++++++++++++
 drivers/net/stmmac/gmac.c           | 700 ------------------------------------
 drivers/net/stmmac/gmac.h           | 204 -----------
 drivers/net/stmmac/stmmac_main.c    |   2 +-
 9 files changed, 947 insertions(+), 910 deletions(-)
 create mode 100644 drivers/net/stmmac/dwmac1000.h
 create mode 100644 drivers/net/stmmac/dwmac1000_core.c
 create mode 100644 drivers/net/stmmac/dwmac1000_dma.c
 delete mode 100644 drivers/net/stmmac/gmac.c
 delete mode 100644 drivers/net/stmmac/gmac.h

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile
index 2ed83859fd59..c776af15fe1a 100644
--- a/drivers/net/stmmac/Makefile
+++ b/drivers/net/stmmac/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_STMMAC_ETH) += stmmac.o
 stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
-stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o dwmac_lib.o \
-		dwmac100.o  gmac.o $(stmmac-y)
+stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o	\
+	      dwmac_lib.o dwmac1000_core.o  dwmac1000_dma.o	\
+	      dwmac100.o $(stmmac-y)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 987faaaa1920..25b53d411516 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -224,7 +224,7 @@ struct mac_device_info {
 	struct mac_link link;
 };
 
-struct mac_device_info *gmac_setup(unsigned long addr);
+struct mac_device_info *dwmac1000_setup(unsigned long addr);
 struct mac_device_info *dwmac100_setup(unsigned long addr);
 
 extern void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h
index 6d2a0b2f5e57..63a03e264694 100644
--- a/drivers/net/stmmac/descs.h
+++ b/drivers/net/stmmac/descs.h
@@ -1,6 +1,6 @@
 /*******************************************************************************
-  Header File to describe the DMA descriptors
-  Use enhanced descriptors in case of GMAC Cores.
+  Header File to describe the DMA descriptors.
+  Enhanced descriptors have been in case of DWMAC1000 Cores.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/stmmac/dwmac1000.h b/drivers/net/stmmac/dwmac1000.h
new file mode 100644
index 000000000000..3d54d6c99129
--- /dev/null
+++ b/drivers/net/stmmac/dwmac1000.h
@@ -0,0 +1,221 @@
+/*******************************************************************************
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "common.h"
+
+#define GMAC_CONTROL		0x00000000	/* Configuration */
+#define GMAC_FRAME_FILTER	0x00000004	/* Frame Filter */
+#define GMAC_HASH_HIGH		0x00000008	/* Multicast Hash Table High */
+#define GMAC_HASH_LOW		0x0000000c	/* Multicast Hash Table Low */
+#define GMAC_MII_ADDR		0x00000010	/* MII Address */
+#define GMAC_MII_DATA		0x00000014	/* MII Data */
+#define GMAC_FLOW_CTRL		0x00000018	/* Flow Control */
+#define GMAC_VLAN_TAG		0x0000001c	/* VLAN Tag */
+#define GMAC_VERSION		0x00000020	/* GMAC CORE Version */
+#define GMAC_WAKEUP_FILTER	0x00000028	/* Wake-up Frame Filter */
+
+#define GMAC_INT_STATUS		0x00000038	/* interrupt status register */
+enum dwmac1000_irq_status {
+	time_stamp_irq = 0x0200,
+	mmc_rx_csum_offload_irq = 0x0080,
+	mmc_tx_irq = 0x0040,
+	mmc_rx_irq = 0x0020,
+	mmc_irq = 0x0010,
+	pmt_irq = 0x0008,
+	pcs_ane_irq = 0x0004,
+	pcs_link_irq = 0x0002,
+	rgmii_irq = 0x0001,
+};
+#define GMAC_INT_MASK		0x0000003c	/* interrupt mask register */
+
+/* PMT Control and Status */
+#define GMAC_PMT		0x0000002c
+enum power_event {
+	pointer_reset = 0x80000000,
+	global_unicast = 0x00000200,
+	wake_up_rx_frame = 0x00000040,
+	magic_frame = 0x00000020,
+	wake_up_frame_en = 0x00000004,
+	magic_pkt_en = 0x00000002,
+	power_down = 0x00000001,
+};
+
+/* GMAC HW ADDR regs */
+#define GMAC_ADDR_HIGH(reg)		(0x00000040+(reg * 8))
+#define GMAC_ADDR_LOW(reg)		(0x00000044+(reg * 8))
+#define GMAC_MAX_UNICAST_ADDRESSES	16
+
+#define GMAC_AN_CTRL	0x000000c0	/* AN control */
+#define GMAC_AN_STATUS	0x000000c4	/* AN status */
+#define GMAC_ANE_ADV	0x000000c8	/* Auto-Neg. Advertisement */
+#define GMAC_ANE_LINK	0x000000cc	/* Auto-Neg. link partener ability */
+#define GMAC_ANE_EXP	0x000000d0	/* ANE expansion */
+#define GMAC_TBI	0x000000d4	/* TBI extend status */
+#define GMAC_GMII_STATUS 0x000000d8	/* S/R-GMII status */
+
+/* GMAC Configuration defines */
+#define GMAC_CONTROL_TC	0x01000000	/* Transmit Conf. in RGMII/SGMII */
+#define GMAC_CONTROL_WD	0x00800000	/* Disable Watchdog on receive */
+#define GMAC_CONTROL_JD	0x00400000	/* Jabber disable */
+#define GMAC_CONTROL_BE	0x00200000	/* Frame Burst Enable */
+#define GMAC_CONTROL_JE	0x00100000	/* Jumbo frame */
+enum inter_frame_gap {
+	GMAC_CONTROL_IFG_88 = 0x00040000,
+	GMAC_CONTROL_IFG_80 = 0x00020000,
+	GMAC_CONTROL_IFG_40 = 0x000e0000,
+};
+#define GMAC_CONTROL_DCRS	0x00010000 /* Disable carrier sense during tx */
+#define GMAC_CONTROL_PS		0x00008000 /* Port Select 0:GMI 1:MII */
+#define GMAC_CONTROL_FES	0x00004000 /* Speed 0:10 1:100 */
+#define GMAC_CONTROL_DO		0x00002000 /* Disable Rx Own */
+#define GMAC_CONTROL_LM		0x00001000 /* Loop-back mode */
+#define GMAC_CONTROL_DM		0x00000800 /* Duplex Mode */
+#define GMAC_CONTROL_IPC	0x00000400 /* Checksum Offload */
+#define GMAC_CONTROL_DR		0x00000200 /* Disable Retry */
+#define GMAC_CONTROL_LUD	0x00000100 /* Link up/down */
+#define GMAC_CONTROL_ACS	0x00000080 /* Automatic Pad Stripping */
+#define GMAC_CONTROL_DC		0x00000010 /* Deferral Check */
+#define GMAC_CONTROL_TE		0x00000008 /* Transmitter Enable */
+#define GMAC_CONTROL_RE		0x00000004 /* Receiver Enable */
+
+#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
+			GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE)
+
+/* GMAC Frame Filter defines */
+#define GMAC_FRAME_FILTER_PR	0x00000001	/* Promiscuous Mode */
+#define GMAC_FRAME_FILTER_HUC	0x00000002	/* Hash Unicast */
+#define GMAC_FRAME_FILTER_HMC	0x00000004	/* Hash Multicast */
+#define GMAC_FRAME_FILTER_DAIF	0x00000008	/* DA Inverse Filtering */
+#define GMAC_FRAME_FILTER_PM	0x00000010	/* Pass all multicast */
+#define GMAC_FRAME_FILTER_DBF	0x00000020	/* Disable Broadcast frames */
+#define GMAC_FRAME_FILTER_SAIF	0x00000100	/* Inverse Filtering */
+#define GMAC_FRAME_FILTER_SAF	0x00000200	/* Source Address Filter */
+#define GMAC_FRAME_FILTER_HPF	0x00000400	/* Hash or perfect Filter */
+#define GMAC_FRAME_FILTER_RA	0x80000000	/* Receive all mode */
+/* GMII ADDR  defines */
+#define GMAC_MII_ADDR_WRITE	0x00000002	/* MII Write */
+#define GMAC_MII_ADDR_BUSY	0x00000001	/* MII Busy */
+/* GMAC FLOW CTRL defines */
+#define GMAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
+#define GMAC_FLOW_CTRL_PT_SHIFT	16
+#define GMAC_FLOW_CTRL_RFE	0x00000004	/* Rx Flow Control Enable */
+#define GMAC_FLOW_CTRL_TFE	0x00000002	/* Tx Flow Control Enable */
+#define GMAC_FLOW_CTRL_FCB_BPA	0x00000001	/* Flow Control Busy ... */
+
+/*--- DMA BLOCK defines ---*/
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
+#define DMA_BUS_MODE_DA		0x00000002	/* Arbitration scheme */
+#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT	2	/*   (in DWORDS)      */
+/* Programmable burst length (passed thorugh platform)*/
+#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT	8
+
+enum rx_tx_priority_ratio {
+	double_ratio = 0x00004000,	/*2:1 */
+	triple_ratio = 0x00008000,	/*3:1 */
+	quadruple_ratio = 0x0000c000,	/*4:1 */
+};
+
+#define DMA_BUS_MODE_FB		0x00010000	/* Fixed burst */
+#define DMA_BUS_MODE_RPBL_MASK	0x003e0000	/* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT	17
+#define DMA_BUS_MODE_USP	0x00800000
+#define DMA_BUS_MODE_4PBL	0x01000000
+#define DMA_BUS_MODE_AAL	0x02000000
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_HOST_TX_DESC	  0x00001048	/* Current Host Tx descriptor */
+#define DMA_HOST_RX_DESC	  0x0000104c	/* Current Host Rx descriptor */
+/*  DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK	  0x0000c000	/* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT	  14
+#define DMA_BUS_FB	  	  0x00010000	/* Fixed Burst */
+
+/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
+#define DMA_CONTROL_DT		0x04000000 /* Disable Drop TCP/IP csum error */
+#define DMA_CONTROL_RSF		0x02000000 /* Receive Store and Forward */
+#define DMA_CONTROL_DFF		0x01000000 /* Disaable flushing */
+/* Threshold for Activating the FC */
+enum rfa {
+	act_full_minus_1 = 0x00800000,
+	act_full_minus_2 = 0x00800200,
+	act_full_minus_3 = 0x00800400,
+	act_full_minus_4 = 0x00800600,
+};
+/* Threshold for Deactivating the FC */
+enum rfd {
+	deac_full_minus_1 = 0x00400000,
+	deac_full_minus_2 = 0x00400800,
+	deac_full_minus_3 = 0x00401000,
+	deac_full_minus_4 = 0x00401800,
+};
+#define DMA_CONTROL_TSF		0x00200000 /* Transmit  Store and Forward */
+#define DMA_CONTROL_FTF		0x00100000 /* Flush transmit FIFO */
+
+enum ttc_control {
+	DMA_CONTROL_TTC_64 = 0x00000000,
+	DMA_CONTROL_TTC_128 = 0x00004000,
+	DMA_CONTROL_TTC_192 = 0x00008000,
+	DMA_CONTROL_TTC_256 = 0x0000c000,
+	DMA_CONTROL_TTC_40 = 0x00010000,
+	DMA_CONTROL_TTC_32 = 0x00014000,
+	DMA_CONTROL_TTC_24 = 0x00018000,
+	DMA_CONTROL_TTC_16 = 0x0001c000,
+};
+#define DMA_CONTROL_TC_TX_MASK	0xfffe3fff
+
+#define DMA_CONTROL_EFC		0x00000100
+#define DMA_CONTROL_FEF		0x00000080
+#define DMA_CONTROL_FUF		0x00000040
+
+enum rtc_control {
+	DMA_CONTROL_RTC_64 = 0x00000000,
+	DMA_CONTROL_RTC_32 = 0x00000008,
+	DMA_CONTROL_RTC_96 = 0x00000010,
+	DMA_CONTROL_RTC_128 = 0x00000018,
+};
+#define DMA_CONTROL_TC_RX_MASK	0xffffffe7
+
+#define DMA_CONTROL_OSF	0x00000004	/* Operate on second frame */
+
+/* MMC registers offset */
+#define GMAC_MMC_CTRL      0x100
+#define GMAC_MMC_RX_INTR   0x104
+#define GMAC_MMC_TX_INTR   0x108
+#define GMAC_MMC_RX_CSUM_OFFLOAD   0x208
+
+#undef DWMAC1000_DEBUG
+/* #define DWMAC1000__DEBUG */
+#undef FRAME_FILTER_DEBUG
+/* #define FRAME_FILTER_DEBUG */
+#ifdef DWMAC1000__DEBUG
+#define DBG(fmt, args...)  printk(fmt, ## args)
+#else
+#define DBG(fmt, args...)  do { } while (0)
+#endif
+
+extern struct stmmac_dma_ops dwmac1000_dma_ops;
+extern struct stmmac_desc_ops dwmac1000_desc_ops;
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
new file mode 100644
index 000000000000..928eac05b912
--- /dev/null
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -0,0 +1,245 @@
+/*******************************************************************************
+  This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+  DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
+  developing this code.
+
+  This only implements the mac core functions for this chip.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/crc32.h>
+#include "dwmac1000.h"
+
+static void dwmac1000_core_init(unsigned long ioaddr)
+{
+	u32 value = readl(ioaddr + GMAC_CONTROL);
+	value |= GMAC_CORE_INIT;
+	writel(value, ioaddr + GMAC_CONTROL);
+
+	/* STBus Bridge Configuration */
+	/*writel(0xc5608, ioaddr + 0x00007000);*/
+
+	/* Freeze MMC counters */
+	writel(0x8, ioaddr + GMAC_MMC_CTRL);
+	/* Mask GMAC interrupts */
+	writel(0x207, ioaddr + GMAC_INT_MASK);
+
+#ifdef STMMAC_VLAN_TAG_USED
+	/* Tag detection without filtering */
+	writel(0x0, ioaddr + GMAC_VLAN_TAG);
+#endif
+	return;
+}
+
+static void dwmac1000_dump_regs(unsigned long ioaddr)
+{
+	int i;
+	pr_info("\tDWMAC1000 regs (base addr = 0x%8x)\n", (unsigned int)ioaddr);
+
+	for (i = 0; i < 55; i++) {
+		int offset = i * 4;
+		pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
+			offset, readl(ioaddr + offset));
+	}
+	return;
+}
+
+static void dwmac1000_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+				unsigned int reg_n)
+{
+	stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+				GMAC_ADDR_LOW(reg_n));
+}
+
+static void dwmac1000_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+				unsigned int reg_n)
+{
+	stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+				GMAC_ADDR_LOW(reg_n));
+}
+
+static void dwmac1000_set_filter(struct net_device *dev)
+{
+	unsigned long ioaddr = dev->base_addr;
+	unsigned int value = 0;
+
+	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
+	    __func__, dev->mc_count, dev->uc.count);
+
+	if (dev->flags & IFF_PROMISC)
+		value = GMAC_FRAME_FILTER_PR;
+	else if ((dev->mc_count > HASH_TABLE_SIZE)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		value = GMAC_FRAME_FILTER_PM;	/* pass all multi */
+		writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
+		writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
+	} else if (dev->mc_count > 0) {
+		int i;
+		u32 mc_filter[2];
+		struct dev_mc_list *mclist;
+
+		/* Hash filter for multicast */
+		value = GMAC_FRAME_FILTER_HMC;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+			/* The upper 6 bits of the calculated CRC are used to
+			   index the contens of the hash table */
+			int bit_nr =
+			    bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26;
+			/* The most significant bit determines the register to
+			 * use (H/L) while the other 5 bits determine the bit
+			 * within the register. */
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		writel(mc_filter[0], ioaddr + GMAC_HASH_LOW);
+		writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH);
+	}
+
+	/* Handle multiple unicast addresses (perfect filtering)*/
+	if (dev->uc.count > GMAC_MAX_UNICAST_ADDRESSES)
+		/* Switch to promiscuous mode is more than 16 addrs
+		   are required */
+		value |= GMAC_FRAME_FILTER_PR;
+	else {
+		int reg = 1;
+		struct netdev_hw_addr *ha;
+
+			list_for_each_entry(ha, &dev->uc.list, list) {
+				dwmac1000_set_umac_addr(ioaddr, ha->addr, reg);
+				reg++;
+		}
+	}
+
+#ifdef FRAME_FILTER_DEBUG
+	/* Enable Receive all mode (to debug filtering_fail errors) */
+	value |= GMAC_FRAME_FILTER_RA;
+#endif
+	writel(value, ioaddr + GMAC_FRAME_FILTER);
+
+	DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
+	    "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER),
+	    readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW));
+
+	return;
+}
+
+static void dwmac1000_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+			   unsigned int fc, unsigned int pause_time)
+{
+	unsigned int flow = 0;
+
+	DBG(KERN_DEBUG "GMAC Flow-Control:\n");
+	if (fc & FLOW_RX) {
+		DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
+		flow |= GMAC_FLOW_CTRL_RFE;
+	}
+	if (fc & FLOW_TX) {
+		DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
+		flow |= GMAC_FLOW_CTRL_TFE;
+	}
+
+	if (duplex) {
+		DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time);
+		flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT);
+	}
+
+	writel(flow, ioaddr + GMAC_FLOW_CTRL);
+	return;
+}
+
+static void dwmac1000_pmt(unsigned long ioaddr, unsigned long mode)
+{
+	unsigned int pmt = 0;
+
+	if (mode == WAKE_MAGIC) {
+		DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
+		pmt |= power_down | magic_pkt_en;
+	} else if (mode == WAKE_UCAST) {
+		DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
+		pmt |= global_unicast;
+	}
+
+	writel(pmt, ioaddr + GMAC_PMT);
+	return;
+}
+
+
+static void dwmac1000_irq_status(unsigned long ioaddr)
+{
+	u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+
+	/* Not used events (e.g. MMC interrupts) are not handled. */
+	if ((intr_status & mmc_tx_irq))
+		DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+		    readl(ioaddr + GMAC_MMC_TX_INTR));
+	if (unlikely(intr_status & mmc_rx_irq))
+		DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+		    readl(ioaddr + GMAC_MMC_RX_INTR));
+	if (unlikely(intr_status & mmc_rx_csum_offload_irq))
+		DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+		    readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+	if (unlikely(intr_status & pmt_irq)) {
+		DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+		/* clear the PMT bits 5 and 6 by reading the PMT
+		 * status register. */
+		readl(ioaddr + GMAC_PMT);
+	}
+
+	return;
+}
+
+struct stmmac_ops dwmac1000_ops = {
+	.core_init = dwmac1000_core_init,
+	.dump_regs = dwmac1000_dump_regs,
+	.host_irq_status = dwmac1000_irq_status,
+	.set_filter = dwmac1000_set_filter,
+	.flow_ctrl = dwmac1000_flow_ctrl,
+	.pmt = dwmac1000_pmt,
+	.set_umac_addr = dwmac1000_set_umac_addr,
+	.get_umac_addr = dwmac1000_get_umac_addr,
+};
+
+struct mac_device_info *dwmac1000_setup(unsigned long ioaddr)
+{
+	struct mac_device_info *mac;
+	u32 uid = readl(ioaddr + GMAC_VERSION);
+
+	pr_info("\tDWMAC1000 - user ID: 0x%x, Synopsys ID: 0x%x\n",
+		((uid & 0x0000ff00) >> 8), (uid & 0x000000ff));
+
+	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+
+	mac->mac = &dwmac1000_ops;
+	mac->desc = &dwmac1000_desc_ops;
+	mac->dma = &dwmac1000_dma_ops;
+
+	mac->pmt = PMT_SUPPORTED;
+	mac->link.port = GMAC_CONTROL_PS;
+	mac->link.duplex = GMAC_CONTROL_DM;
+	mac->link.speed = GMAC_CONTROL_FES;
+	mac->mii.addr = GMAC_MII_ADDR;
+	mac->mii.data = GMAC_MII_DATA;
+
+	return mac;
+}
diff --git a/drivers/net/stmmac/dwmac1000_dma.c b/drivers/net/stmmac/dwmac1000_dma.c
new file mode 100644
index 000000000000..68245508e2de
--- /dev/null
+++ b/drivers/net/stmmac/dwmac1000_dma.c
@@ -0,0 +1,474 @@
+/*******************************************************************************
+  This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+  DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
+  developing this code.
+
+  This contains the functions to handle the dma and descriptors.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include "dwmac1000.h"
+#include "dwmac_dma.h"
+
+static int dwmac1000_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
+			      u32 dma_rx)
+{
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	/* DMA SW reset */
+	value |= DMA_BUS_MODE_SFT_RESET;
+	writel(value, ioaddr + DMA_BUS_MODE);
+	do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+	value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL |
+	    ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
+	     (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+
+#ifdef CONFIG_STMMAC_DA
+	value |= DMA_BUS_MODE_DA;	/* Rx has priority over tx */
+#endif
+	writel(value, ioaddr + DMA_BUS_MODE);
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+	/* The base address of the RX/TX descriptor lists must be written into
+	 * DMA CSR3 and CSR4, respectively. */
+	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+	return 0;
+}
+
+/* Transmit FIFO flush operation */
+static void dwmac1000_flush_tx_fifo(unsigned long ioaddr)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+	writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
+
+	do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
+}
+
+static void dwmac1000_dma_operation_mode(unsigned long ioaddr, int txmode,
+				    int rxmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (txmode == SF_DMA_MODE) {
+		DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n");
+		/* Transmit COE type 2 cannot be done in cut-through mode. */
+		csr6 |= DMA_CONTROL_TSF;
+		/* Operating on second frame increase the performance
+		 * especially when transmit store-and-forward is used.*/
+		csr6 |= DMA_CONTROL_OSF;
+	} else {
+		DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
+			      " (threshold = %d)\n", txmode);
+		csr6 &= ~DMA_CONTROL_TSF;
+		csr6 &= DMA_CONTROL_TC_TX_MASK;
+		/* Set the transmit threshold */
+		if (txmode <= 32)
+			csr6 |= DMA_CONTROL_TTC_32;
+		else if (txmode <= 64)
+			csr6 |= DMA_CONTROL_TTC_64;
+		else if (txmode <= 128)
+			csr6 |= DMA_CONTROL_TTC_128;
+		else if (txmode <= 192)
+			csr6 |= DMA_CONTROL_TTC_192;
+		else
+			csr6 |= DMA_CONTROL_TTC_256;
+	}
+
+	if (rxmode == SF_DMA_MODE) {
+		DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n");
+		csr6 |= DMA_CONTROL_RSF;
+	} else {
+		DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
+			      " (threshold = %d)\n", rxmode);
+		csr6 &= ~DMA_CONTROL_RSF;
+		csr6 &= DMA_CONTROL_TC_RX_MASK;
+		if (rxmode <= 32)
+			csr6 |= DMA_CONTROL_RTC_32;
+		else if (rxmode <= 64)
+			csr6 |= DMA_CONTROL_RTC_64;
+		else if (rxmode <= 96)
+			csr6 |= DMA_CONTROL_RTC_96;
+		else
+			csr6 |= DMA_CONTROL_RTC_128;
+	}
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+	return;
+}
+
+/* Not yet implemented --- no RMON module */
+static void dwmac1000_dma_diagnostic_fr(void *data,
+		  struct stmmac_extra_stats *x, unsigned long ioaddr)
+{
+	return;
+}
+
+static void dwmac1000_dump_dma_regs(unsigned long ioaddr)
+{
+	int i;
+	pr_info(" DMA registers\n");
+	for (i = 0; i < 22; i++) {
+		if ((i < 9) || (i > 17)) {
+			int offset = i * 4;
+			pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
+			       (DMA_BUS_MODE + offset),
+			       readl(ioaddr + DMA_BUS_MODE + offset));
+		}
+	}
+	return;
+}
+
+static int dwmac1000_get_tx_frame_status(void *data,
+				struct stmmac_extra_stats *x,
+				struct dma_desc *p, unsigned long ioaddr)
+{
+	int ret = 0;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.etx.error_summary)) {
+		DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx);
+		if (unlikely(p->des01.etx.jabber_timeout)) {
+			DBG(KERN_ERR "\tjabber_timeout error\n");
+			x->tx_jabber++;
+		}
+
+		if (unlikely(p->des01.etx.frame_flushed)) {
+			DBG(KERN_ERR "\tframe_flushed error\n");
+			x->tx_frame_flushed++;
+			dwmac1000_flush_tx_fifo(ioaddr);
+		}
+
+		if (unlikely(p->des01.etx.loss_carrier)) {
+			DBG(KERN_ERR "\tloss_carrier error\n");
+			x->tx_losscarrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely(p->des01.etx.no_carrier)) {
+			DBG(KERN_ERR "\tno_carrier error\n");
+			x->tx_carrier++;
+			stats->tx_carrier_errors++;
+		}
+		if (unlikely(p->des01.etx.late_collision)) {
+			DBG(KERN_ERR "\tlate_collision error\n");
+			stats->collisions += p->des01.etx.collision_count;
+		}
+		if (unlikely(p->des01.etx.excessive_collisions)) {
+			DBG(KERN_ERR "\texcessive_collisions\n");
+			stats->collisions += p->des01.etx.collision_count;
+		}
+		if (unlikely(p->des01.etx.excessive_deferral)) {
+			DBG(KERN_INFO "\texcessive tx_deferral\n");
+			x->tx_deferred++;
+		}
+
+		if (unlikely(p->des01.etx.underflow_error)) {
+			DBG(KERN_ERR "\tunderflow error\n");
+			dwmac1000_flush_tx_fifo(ioaddr);
+			x->tx_underflow++;
+		}
+
+		if (unlikely(p->des01.etx.ip_header_error)) {
+			DBG(KERN_ERR "\tTX IP header csum error\n");
+			x->tx_ip_header_error++;
+		}
+
+		if (unlikely(p->des01.etx.payload_error)) {
+			DBG(KERN_ERR "\tAddr/Payload csum error\n");
+			x->tx_payload_error++;
+			dwmac1000_flush_tx_fifo(ioaddr);
+		}
+
+		ret = -1;
+	}
+
+	if (unlikely(p->des01.etx.deferred)) {
+		DBG(KERN_INFO "GMAC TX status: tx deferred\n");
+		x->tx_deferred++;
+	}
+#ifdef STMMAC_VLAN_TAG_USED
+	if (p->des01.etx.vlan_frame) {
+		DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+		x->tx_vlan++;
+	}
+#endif
+
+	return ret;
+}
+
+static int dwmac1000_get_tx_len(struct dma_desc *p)
+{
+	return p->des01.etx.buffer1_size;
+}
+
+static int dwmac1000_coe_rdes0(int ipc_err, int type, int payload_err)
+{
+	int ret = good_frame;
+	u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7;
+
+	/* bits 5 7 0 | Frame status
+	 * ----------------------------------------------------------
+	 *      0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects)
+	 *      1 0 0 | IPv4/6 No CSUM errorS.
+	 *      1 0 1 | IPv4/6 CSUM PAYLOAD error
+	 *      1 1 0 | IPv4/6 CSUM IP HR error
+	 *      1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS
+	 *      0 0 1 | IPv4/6 unsupported IP PAYLOAD
+	 *      0 1 1 | COE bypassed.. no IPv4/6 frame
+	 *      0 1 0 | Reserved.
+	 */
+	if (status == 0x0) {
+		DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n");
+		ret = good_frame;
+	} else if (status == 0x4) {
+		DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n");
+		ret = good_frame;
+	} else if (status == 0x5) {
+		DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n");
+		ret = csum_none;
+	} else if (status == 0x6) {
+		DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n");
+		ret = csum_none;
+	} else if (status == 0x7) {
+		DBG(KERN_ERR
+		    "RX Des0 status: IPv4/6 Header and Payload Error.\n");
+		ret = csum_none;
+	} else if (status == 0x1) {
+		DBG(KERN_ERR
+		    "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n");
+		ret = discard_frame;
+	} else if (status == 0x3) {
+		DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n");
+		ret = discard_frame;
+	}
+	return ret;
+}
+
+static int dwmac1000_get_rx_frame_status(void *data,
+			struct stmmac_extra_stats *x, struct dma_desc *p)
+{
+	int ret = good_frame;
+	struct net_device_stats *stats = (struct net_device_stats *)data;
+
+	if (unlikely(p->des01.erx.error_summary)) {
+		DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx);
+		if (unlikely(p->des01.erx.descriptor_error)) {
+			DBG(KERN_ERR "\tdescriptor error\n");
+			x->rx_desc++;
+			stats->rx_length_errors++;
+		}
+		if (unlikely(p->des01.erx.overflow_error)) {
+			DBG(KERN_ERR "\toverflow error\n");
+			x->rx_gmac_overflow++;
+		}
+
+		if (unlikely(p->des01.erx.ipc_csum_error))
+			DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n");
+
+		if (unlikely(p->des01.erx.late_collision)) {
+			DBG(KERN_ERR "\tlate_collision error\n");
+			stats->collisions++;
+			stats->collisions++;
+		}
+		if (unlikely(p->des01.erx.receive_watchdog)) {
+			DBG(KERN_ERR "\treceive_watchdog error\n");
+			x->rx_watchdog++;
+		}
+		if (unlikely(p->des01.erx.error_gmii)) {
+			DBG(KERN_ERR "\tReceive Error\n");
+			x->rx_mii++;
+		}
+		if (unlikely(p->des01.erx.crc_error)) {
+			DBG(KERN_ERR "\tCRC error\n");
+			x->rx_crc++;
+			stats->rx_crc_errors++;
+		}
+		ret = discard_frame;
+	}
+
+	/* After a payload csum error, the ES bit is set.
+	 * It doesn't match with the information reported into the databook.
+	 * At any rate, we need to understand if the CSUM hw computation is ok
+	 * and report this info to the upper layers. */
+	ret = dwmac1000_coe_rdes0(p->des01.erx.ipc_csum_error,
+		p->des01.erx.frame_type, p->des01.erx.payload_csum_error);
+
+	if (unlikely(p->des01.erx.dribbling)) {
+		DBG(KERN_ERR "GMAC RX: dribbling error\n");
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.erx.sa_filter_fail)) {
+		DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
+		x->sa_rx_filter_fail++;
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.erx.da_filter_fail)) {
+		DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n");
+		x->da_rx_filter_fail++;
+		ret = discard_frame;
+	}
+	if (unlikely(p->des01.erx.length_error)) {
+		DBG(KERN_ERR "GMAC RX: length_error error\n");
+		x->rx_lenght++;
+		ret = discard_frame;
+	}
+#ifdef STMMAC_VLAN_TAG_USED
+	if (p->des01.erx.vlan_tag) {
+		DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n");
+		x->rx_vlan++;
+	}
+#endif
+	return ret;
+}
+
+static void dwmac1000_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
+				int disable_rx_ic)
+{
+	int i;
+	for (i = 0; i < ring_size; i++) {
+		p->des01.erx.own = 1;
+		p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
+		/* To support jumbo frames */
+		p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1;
+		if (i == ring_size - 1)
+			p->des01.erx.end_ring = 1;
+		if (disable_rx_ic)
+			p->des01.erx.disable_ic = 1;
+		p++;
+	}
+	return;
+}
+
+static void dwmac1000_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+	int i;
+
+	for (i = 0; i < ring_size; i++) {
+		p->des01.etx.own = 0;
+		if (i == ring_size - 1)
+			p->des01.etx.end_ring = 1;
+		p++;
+	}
+
+	return;
+}
+
+static int dwmac1000_get_tx_owner(struct dma_desc *p)
+{
+	return p->des01.etx.own;
+}
+
+static int dwmac1000_get_rx_owner(struct dma_desc *p)
+{
+	return p->des01.erx.own;
+}
+
+static void dwmac1000_set_tx_owner(struct dma_desc *p)
+{
+	p->des01.etx.own = 1;
+}
+
+static void dwmac1000_set_rx_owner(struct dma_desc *p)
+{
+	p->des01.erx.own = 1;
+}
+
+static int dwmac1000_get_tx_ls(struct dma_desc *p)
+{
+	return p->des01.etx.last_segment;
+}
+
+static void dwmac1000_release_tx_desc(struct dma_desc *p)
+{
+	int ter = p->des01.etx.end_ring;
+
+	memset(p, 0, sizeof(struct dma_desc));
+	p->des01.etx.end_ring = ter;
+
+	return;
+}
+
+static void dwmac1000_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+				 int csum_flag)
+{
+	p->des01.etx.first_segment = is_fs;
+	if (unlikely(len > BUF_SIZE_4KiB)) {
+		p->des01.etx.buffer1_size = BUF_SIZE_4KiB;
+		p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB;
+	} else {
+		p->des01.etx.buffer1_size = len;
+	}
+	if (likely(csum_flag))
+		p->des01.etx.checksum_insertion = cic_full;
+}
+
+static void dwmac1000_clear_tx_ic(struct dma_desc *p)
+{
+	p->des01.etx.interrupt = 0;
+}
+
+static void dwmac1000_close_tx_desc(struct dma_desc *p)
+{
+	p->des01.etx.last_segment = 1;
+	p->des01.etx.interrupt = 1;
+}
+
+static int dwmac1000_get_rx_frame_len(struct dma_desc *p)
+{
+	return p->des01.erx.frame_length;
+}
+
+struct stmmac_dma_ops dwmac1000_dma_ops = {
+	.init = dwmac1000_dma_init,
+	.dump_regs = dwmac1000_dump_dma_regs,
+	.dma_mode = dwmac1000_dma_operation_mode,
+	.dma_diagnostic_fr = dwmac1000_dma_diagnostic_fr,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
+};
+
+struct stmmac_desc_ops dwmac1000_desc_ops = {
+	.tx_status = dwmac1000_get_tx_frame_status,
+	.rx_status = dwmac1000_get_rx_frame_status,
+	.get_tx_len = dwmac1000_get_tx_len,
+	.init_rx_desc = dwmac1000_init_rx_desc,
+	.init_tx_desc = dwmac1000_init_tx_desc,
+	.get_tx_owner = dwmac1000_get_tx_owner,
+	.get_rx_owner = dwmac1000_get_rx_owner,
+	.release_tx_desc = dwmac1000_release_tx_desc,
+	.prepare_tx_desc = dwmac1000_prepare_tx_desc,
+	.clear_tx_ic = dwmac1000_clear_tx_ic,
+	.close_tx_desc = dwmac1000_close_tx_desc,
+	.get_tx_ls = dwmac1000_get_tx_ls,
+	.set_tx_owner = dwmac1000_set_tx_owner,
+	.set_rx_owner = dwmac1000_set_rx_owner,
+	.get_rx_frame_len = dwmac1000_get_rx_frame_len,
+};
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
deleted file mode 100644
index 07880922ff46..000000000000
--- a/drivers/net/stmmac/gmac.c
+++ /dev/null
@@ -1,700 +0,0 @@
-/*******************************************************************************
-  This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
-  DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
-  developing this code.
-
-  Copyright (C) 2007-2009  STMicroelectronics Ltd
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
-*******************************************************************************/
-
-#include <linux/netdevice.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-
-#include "stmmac.h"
-#include "gmac.h"
-#include "dwmac_dma.h"
-
-#undef GMAC_DEBUG
-/*#define GMAC_DEBUG*/
-#undef FRAME_FILTER_DEBUG
-/*#define FRAME_FILTER_DEBUG*/
-#ifdef GMAC_DEBUG
-#define DBG(fmt, args...)  printk(fmt, ## args)
-#else
-#define DBG(fmt, args...)  do { } while (0)
-#endif
-
-static void gmac_dump_regs(unsigned long ioaddr)
-{
-	int i;
-	pr_info("\t----------------------------------------------\n"
-	       "\t  GMAC registers (base addr = 0x%8x)\n"
-	       "\t----------------------------------------------\n",
-	       (unsigned int)ioaddr);
-
-	for (i = 0; i < 55; i++) {
-		int offset = i * 4;
-		pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
-		       offset, readl(ioaddr + offset));
-	}
-	return;
-}
-
-static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx)
-{
-	u32 value = readl(ioaddr + DMA_BUS_MODE);
-	/* DMA SW reset */
-	value |= DMA_BUS_MODE_SFT_RESET;
-	writel(value, ioaddr + DMA_BUS_MODE);
-	do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
-
-	value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL |
-	    ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
-	     (pbl << DMA_BUS_MODE_RPBL_SHIFT));
-
-#ifdef CONFIG_STMMAC_DA
-	value |= DMA_BUS_MODE_DA;	/* Rx has priority over tx */
-#endif
-	writel(value, ioaddr + DMA_BUS_MODE);
-
-	/* Mask interrupts by writing to CSR7 */
-	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
-
-	/* The base address of the RX/TX descriptor lists must be written into
-	 * DMA CSR3 and CSR4, respectively. */
-	writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
-	writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
-
-	return 0;
-}
-
-/* Transmit FIFO flush operation */
-static void gmac_flush_tx_fifo(unsigned long ioaddr)
-{
-	u32 csr6 = readl(ioaddr + DMA_CONTROL);
-	writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
-
-	do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
-}
-
-static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
-				    int rxmode)
-{
-	u32 csr6 = readl(ioaddr + DMA_CONTROL);
-
-	if (txmode == SF_DMA_MODE) {
-		DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n");
-		/* Transmit COE type 2 cannot be done in cut-through mode. */
-		csr6 |= DMA_CONTROL_TSF;
-		/* Operating on second frame increase the performance
-		 * especially when transmit store-and-forward is used.*/
-		csr6 |= DMA_CONTROL_OSF;
-	} else {
-		DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
-			      " (threshold = %d)\n", txmode);
-		csr6 &= ~DMA_CONTROL_TSF;
-		csr6 &= DMA_CONTROL_TC_TX_MASK;
-		/* Set the transmit threshold */
-		if (txmode <= 32)
-			csr6 |= DMA_CONTROL_TTC_32;
-		else if (txmode <= 64)
-			csr6 |= DMA_CONTROL_TTC_64;
-		else if (txmode <= 128)
-			csr6 |= DMA_CONTROL_TTC_128;
-		else if (txmode <= 192)
-			csr6 |= DMA_CONTROL_TTC_192;
-		else
-			csr6 |= DMA_CONTROL_TTC_256;
-	}
-
-	if (rxmode == SF_DMA_MODE) {
-		DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n");
-		csr6 |= DMA_CONTROL_RSF;
-	} else {
-		DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
-			      " (threshold = %d)\n", rxmode);
-		csr6 &= ~DMA_CONTROL_RSF;
-		csr6 &= DMA_CONTROL_TC_RX_MASK;
-		if (rxmode <= 32)
-			csr6 |= DMA_CONTROL_RTC_32;
-		else if (rxmode <= 64)
-			csr6 |= DMA_CONTROL_RTC_64;
-		else if (rxmode <= 96)
-			csr6 |= DMA_CONTROL_RTC_96;
-		else
-			csr6 |= DMA_CONTROL_RTC_128;
-	}
-
-	writel(csr6, ioaddr + DMA_CONTROL);
-	return;
-}
-
-/* Not yet implemented --- no RMON module */
-static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
-				   unsigned long ioaddr)
-{
-	return;
-}
-
-static void gmac_dump_dma_regs(unsigned long ioaddr)
-{
-	int i;
-	pr_info(" DMA registers\n");
-	for (i = 0; i < 22; i++) {
-		if ((i < 9) || (i > 17)) {
-			int offset = i * 4;
-			pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
-			       (DMA_BUS_MODE + offset),
-			       readl(ioaddr + DMA_BUS_MODE + offset));
-		}
-	}
-	return;
-}
-
-static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
-				    struct dma_desc *p, unsigned long ioaddr)
-{
-	int ret = 0;
-	struct net_device_stats *stats = (struct net_device_stats *)data;
-
-	if (unlikely(p->des01.etx.error_summary)) {
-		DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx);
-		if (unlikely(p->des01.etx.jabber_timeout)) {
-			DBG(KERN_ERR "\tjabber_timeout error\n");
-			x->tx_jabber++;
-		}
-
-		if (unlikely(p->des01.etx.frame_flushed)) {
-			DBG(KERN_ERR "\tframe_flushed error\n");
-			x->tx_frame_flushed++;
-			gmac_flush_tx_fifo(ioaddr);
-		}
-
-		if (unlikely(p->des01.etx.loss_carrier)) {
-			DBG(KERN_ERR "\tloss_carrier error\n");
-			x->tx_losscarrier++;
-			stats->tx_carrier_errors++;
-		}
-		if (unlikely(p->des01.etx.no_carrier)) {
-			DBG(KERN_ERR "\tno_carrier error\n");
-			x->tx_carrier++;
-			stats->tx_carrier_errors++;
-		}
-		if (unlikely(p->des01.etx.late_collision)) {
-			DBG(KERN_ERR "\tlate_collision error\n");
-			stats->collisions += p->des01.etx.collision_count;
-		}
-		if (unlikely(p->des01.etx.excessive_collisions)) {
-			DBG(KERN_ERR "\texcessive_collisions\n");
-			stats->collisions += p->des01.etx.collision_count;
-		}
-		if (unlikely(p->des01.etx.excessive_deferral)) {
-			DBG(KERN_INFO "\texcessive tx_deferral\n");
-			x->tx_deferred++;
-		}
-
-		if (unlikely(p->des01.etx.underflow_error)) {
-			DBG(KERN_ERR "\tunderflow error\n");
-			gmac_flush_tx_fifo(ioaddr);
-			x->tx_underflow++;
-		}
-
-		if (unlikely(p->des01.etx.ip_header_error)) {
-			DBG(KERN_ERR "\tTX IP header csum error\n");
-			x->tx_ip_header_error++;
-		}
-
-		if (unlikely(p->des01.etx.payload_error)) {
-			DBG(KERN_ERR "\tAddr/Payload csum error\n");
-			x->tx_payload_error++;
-			gmac_flush_tx_fifo(ioaddr);
-		}
-
-		ret = -1;
-	}
-
-	if (unlikely(p->des01.etx.deferred)) {
-		DBG(KERN_INFO "GMAC TX status: tx deferred\n");
-		x->tx_deferred++;
-	}
-#ifdef STMMAC_VLAN_TAG_USED
-	if (p->des01.etx.vlan_frame) {
-		DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
-		x->tx_vlan++;
-	}
-#endif
-
-	return ret;
-}
-
-static int gmac_get_tx_len(struct dma_desc *p)
-{
-	return p->des01.etx.buffer1_size;
-}
-
-static int gmac_coe_rdes0(int ipc_err, int type, int payload_err)
-{
-	int ret = good_frame;
-	u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7;
-
-	/* bits 5 7 0 | Frame status
-	 * ----------------------------------------------------------
-	 *      0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects)
-	 *      1 0 0 | IPv4/6 No CSUM errorS.
-	 *      1 0 1 | IPv4/6 CSUM PAYLOAD error
-	 *      1 1 0 | IPv4/6 CSUM IP HR error
-	 *      1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS
-	 *      0 0 1 | IPv4/6 unsupported IP PAYLOAD
-	 *      0 1 1 | COE bypassed.. no IPv4/6 frame
-	 *      0 1 0 | Reserved.
-	 */
-	if (status == 0x0) {
-		DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n");
-		ret = good_frame;
-	} else if (status == 0x4) {
-		DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n");
-		ret = good_frame;
-	} else if (status == 0x5) {
-		DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n");
-		ret = csum_none;
-	} else if (status == 0x6) {
-		DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n");
-		ret = csum_none;
-	} else if (status == 0x7) {
-		DBG(KERN_ERR
-		    "RX Des0 status: IPv4/6 Header and Payload Error.\n");
-		ret = csum_none;
-	} else if (status == 0x1) {
-		DBG(KERN_ERR
-		    "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n");
-		ret = discard_frame;
-	} else if (status == 0x3) {
-		DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n");
-		ret = discard_frame;
-	}
-	return ret;
-}
-
-static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
-				    struct dma_desc *p)
-{
-	int ret = good_frame;
-	struct net_device_stats *stats = (struct net_device_stats *)data;
-
-	if (unlikely(p->des01.erx.error_summary)) {
-		DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx);
-		if (unlikely(p->des01.erx.descriptor_error)) {
-			DBG(KERN_ERR "\tdescriptor error\n");
-			x->rx_desc++;
-			stats->rx_length_errors++;
-		}
-		if (unlikely(p->des01.erx.overflow_error)) {
-			DBG(KERN_ERR "\toverflow error\n");
-			x->rx_gmac_overflow++;
-		}
-
-		if (unlikely(p->des01.erx.ipc_csum_error))
-			DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n");
-
-		if (unlikely(p->des01.erx.late_collision)) {
-			DBG(KERN_ERR "\tlate_collision error\n");
-			stats->collisions++;
-			stats->collisions++;
-		}
-		if (unlikely(p->des01.erx.receive_watchdog)) {
-			DBG(KERN_ERR "\treceive_watchdog error\n");
-			x->rx_watchdog++;
-		}
-		if (unlikely(p->des01.erx.error_gmii)) {
-			DBG(KERN_ERR "\tReceive Error\n");
-			x->rx_mii++;
-		}
-		if (unlikely(p->des01.erx.crc_error)) {
-			DBG(KERN_ERR "\tCRC error\n");
-			x->rx_crc++;
-			stats->rx_crc_errors++;
-		}
-		ret = discard_frame;
-	}
-
-	/* After a payload csum error, the ES bit is set.
-	 * It doesn't match with the information reported into the databook.
-	 * At any rate, we need to understand if the CSUM hw computation is ok
-	 * and report this info to the upper layers. */
-	ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error,
-		p->des01.erx.frame_type, p->des01.erx.payload_csum_error);
-
-	if (unlikely(p->des01.erx.dribbling)) {
-		DBG(KERN_ERR "GMAC RX: dribbling error\n");
-		ret = discard_frame;
-	}
-	if (unlikely(p->des01.erx.sa_filter_fail)) {
-		DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
-		x->sa_rx_filter_fail++;
-		ret = discard_frame;
-	}
-	if (unlikely(p->des01.erx.da_filter_fail)) {
-		DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n");
-		x->da_rx_filter_fail++;
-		ret = discard_frame;
-	}
-	if (unlikely(p->des01.erx.length_error)) {
-		DBG(KERN_ERR "GMAC RX: length_error error\n");
-		x->rx_lenght++;
-		ret = discard_frame;
-	}
-#ifdef STMMAC_VLAN_TAG_USED
-	if (p->des01.erx.vlan_tag) {
-		DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n");
-		x->rx_vlan++;
-	}
-#endif
-	return ret;
-}
-
-static void gmac_irq_status(unsigned long ioaddr)
-{
-	u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
-
-	/* Not used events (e.g. MMC interrupts) are not handled. */
-	if ((intr_status & mmc_tx_irq))
-		DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
-		    readl(ioaddr + GMAC_MMC_TX_INTR));
-	if (unlikely(intr_status & mmc_rx_irq))
-		DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
-		    readl(ioaddr + GMAC_MMC_RX_INTR));
-	if (unlikely(intr_status & mmc_rx_csum_offload_irq))
-		DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
-		    readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
-	if (unlikely(intr_status & pmt_irq)) {
-		DBG(KERN_DEBUG "GMAC: received Magic frame\n");
-		/* clear the PMT bits 5 and 6 by reading the PMT
-		 * status register. */
-		readl(ioaddr + GMAC_PMT);
-	}
-
-	return;
-}
-
-static void gmac_core_init(unsigned long ioaddr)
-{
-	u32 value = readl(ioaddr + GMAC_CONTROL);
-	value |= GMAC_CORE_INIT;
-	writel(value, ioaddr + GMAC_CONTROL);
-
-	/* Freeze MMC counters */
-	writel(0x8, ioaddr + GMAC_MMC_CTRL);
-	/* Mask GMAC interrupts */
-	writel(0x207, ioaddr + GMAC_INT_MASK);
-
-#ifdef STMMAC_VLAN_TAG_USED
-	/* Tag detection without filtering */
-	writel(0x0, ioaddr + GMAC_VLAN_TAG);
-#endif
-	return;
-}
-
-static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
-				unsigned int reg_n)
-{
-	stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
-				GMAC_ADDR_LOW(reg_n));
-}
-
-static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
-				unsigned int reg_n)
-{
-	stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
-				GMAC_ADDR_LOW(reg_n));
-}
-
-static void gmac_set_filter(struct net_device *dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	unsigned int value = 0;
-
-	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
-	    __func__, dev->mc_count, dev->uc.count);
-
-	if (dev->flags & IFF_PROMISC)
-		value = GMAC_FRAME_FILTER_PR;
-	else if ((dev->mc_count > HASH_TABLE_SIZE)
-		   || (dev->flags & IFF_ALLMULTI)) {
-		value = GMAC_FRAME_FILTER_PM;	/* pass all multi */
-		writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
-		writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
-	} else if (dev->mc_count > 0) {
-		int i;
-		u32 mc_filter[2];
-		struct dev_mc_list *mclist;
-
-		/* Hash filter for multicast */
-		value = GMAC_FRAME_FILTER_HMC;
-
-		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
-			/* The upper 6 bits of the calculated CRC are used to
-			   index the contens of the hash table */
-			int bit_nr =
-			    bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26;
-			/* The most significant bit determines the register to
-			 * use (H/L) while the other 5 bits determine the bit
-			 * within the register. */
-			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-		}
-		writel(mc_filter[0], ioaddr + GMAC_HASH_LOW);
-		writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH);
-	}
-
-	/* Handle multiple unicast addresses (perfect filtering)*/
-	if (dev->uc.count > GMAC_MAX_UNICAST_ADDRESSES)
-		/* Switch to promiscuous mode is more than 16 addrs
-		   are required */
-		value |= GMAC_FRAME_FILTER_PR;
-	else {
-		int reg = 1;
-		struct netdev_hw_addr *ha;
-
-		list_for_each_entry(ha, &dev->uc.list, list) {
-			gmac_set_umac_addr(ioaddr, ha->addr, reg);
-			reg++;
-		}
-	}
-
-#ifdef FRAME_FILTER_DEBUG
-	/* Enable Receive all mode (to debug filtering_fail errors) */
-	value |= GMAC_FRAME_FILTER_RA;
-#endif
-	writel(value, ioaddr + GMAC_FRAME_FILTER);
-
-	DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
-	    "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER),
-	    readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW));
-
-	return;
-}
-
-static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
-			   unsigned int fc, unsigned int pause_time)
-{
-	unsigned int flow = 0;
-
-	DBG(KERN_DEBUG "GMAC Flow-Control:\n");
-	if (fc & FLOW_RX) {
-		DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
-		flow |= GMAC_FLOW_CTRL_RFE;
-	}
-	if (fc & FLOW_TX) {
-		DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
-		flow |= GMAC_FLOW_CTRL_TFE;
-	}
-
-	if (duplex) {
-		DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time);
-		flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT);
-	}
-
-	writel(flow, ioaddr + GMAC_FLOW_CTRL);
-	return;
-}
-
-static void gmac_pmt(unsigned long ioaddr, unsigned long mode)
-{
-	unsigned int pmt = 0;
-
-	if (mode == WAKE_MAGIC) {
-		DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
-		pmt |= power_down | magic_pkt_en;
-	} else if (mode == WAKE_UCAST) {
-		DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
-		pmt |= global_unicast;
-	}
-
-	writel(pmt, ioaddr + GMAC_PMT);
-	return;
-}
-
-static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
-				int disable_rx_ic)
-{
-	int i;
-	for (i = 0; i < ring_size; i++) {
-		p->des01.erx.own = 1;
-		p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
-		/* To support jumbo frames */
-		p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1;
-		if (i == ring_size - 1)
-			p->des01.erx.end_ring = 1;
-		if (disable_rx_ic)
-			p->des01.erx.disable_ic = 1;
-		p++;
-	}
-	return;
-}
-
-static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
-{
-	int i;
-
-	for (i = 0; i < ring_size; i++) {
-		p->des01.etx.own = 0;
-		if (i == ring_size - 1)
-			p->des01.etx.end_ring = 1;
-		p++;
-	}
-
-	return;
-}
-
-static int gmac_get_tx_owner(struct dma_desc *p)
-{
-	return p->des01.etx.own;
-}
-
-static int gmac_get_rx_owner(struct dma_desc *p)
-{
-	return p->des01.erx.own;
-}
-
-static void gmac_set_tx_owner(struct dma_desc *p)
-{
-	p->des01.etx.own = 1;
-}
-
-static void gmac_set_rx_owner(struct dma_desc *p)
-{
-	p->des01.erx.own = 1;
-}
-
-static int gmac_get_tx_ls(struct dma_desc *p)
-{
-	return p->des01.etx.last_segment;
-}
-
-static void gmac_release_tx_desc(struct dma_desc *p)
-{
-	int ter = p->des01.etx.end_ring;
-
-	memset(p, 0, sizeof(struct dma_desc));
-	p->des01.etx.end_ring = ter;
-
-	return;
-}
-
-static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
-				 int csum_flag)
-{
-	p->des01.etx.first_segment = is_fs;
-	if (unlikely(len > BUF_SIZE_4KiB)) {
-		p->des01.etx.buffer1_size = BUF_SIZE_4KiB;
-		p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB;
-	} else {
-		p->des01.etx.buffer1_size = len;
-	}
-	if (likely(csum_flag))
-		p->des01.etx.checksum_insertion = cic_full;
-}
-
-static void gmac_clear_tx_ic(struct dma_desc *p)
-{
-	p->des01.etx.interrupt = 0;
-}
-
-static void gmac_close_tx_desc(struct dma_desc *p)
-{
-	p->des01.etx.last_segment = 1;
-	p->des01.etx.interrupt = 1;
-}
-
-static int gmac_get_rx_frame_len(struct dma_desc *p)
-{
-	return p->des01.erx.frame_length;
-}
-
-struct stmmac_ops gmac_ops = {
-	.core_init = gmac_core_init,
-	.dump_regs = gmac_dump_regs,
-	.host_irq_status = gmac_irq_status,
-	.set_filter = gmac_set_filter,
-	.flow_ctrl = gmac_flow_ctrl,
-	.pmt = gmac_pmt,
-	.set_umac_addr = gmac_set_umac_addr,
-	.get_umac_addr = gmac_get_umac_addr,
-};
-
-struct stmmac_dma_ops gmac_dma_ops = {
-	.init = gmac_dma_init,
-	.dump_regs = gmac_dump_dma_regs,
-	.dma_mode = gmac_dma_operation_mode,
-	.dma_diagnostic_fr = gmac_dma_diagnostic_fr,
-	.enable_dma_transmission = dwmac_enable_dma_transmission,
-	.enable_dma_irq = dwmac_enable_dma_irq,
-	.disable_dma_irq = dwmac_disable_dma_irq,
-	.start_tx = dwmac_dma_start_tx,
-	.stop_tx = dwmac_dma_stop_tx,
-	.start_rx = dwmac_dma_start_rx,
-	.stop_rx = dwmac_dma_stop_rx,
-	.dma_interrupt = dwmac_dma_interrupt,
-};
-
-struct stmmac_desc_ops gmac_desc_ops = {
-	.tx_status = gmac_get_tx_frame_status,
-	.rx_status = gmac_get_rx_frame_status,
-	.get_tx_len = gmac_get_tx_len,
-	.init_rx_desc = gmac_init_rx_desc,
-	.init_tx_desc = gmac_init_tx_desc,
-	.get_tx_owner = gmac_get_tx_owner,
-	.get_rx_owner = gmac_get_rx_owner,
-	.release_tx_desc = gmac_release_tx_desc,
-	.prepare_tx_desc = gmac_prepare_tx_desc,
-	.clear_tx_ic = gmac_clear_tx_ic,
-	.close_tx_desc = gmac_close_tx_desc,
-	.get_tx_ls = gmac_get_tx_ls,
-	.set_tx_owner = gmac_set_tx_owner,
-	.set_rx_owner = gmac_set_rx_owner,
-	.get_rx_frame_len = gmac_get_rx_frame_len,
-};
-
-struct mac_device_info *gmac_setup(unsigned long ioaddr)
-{
-	struct mac_device_info *mac;
-	u32 uid = readl(ioaddr + GMAC_VERSION);
-
-	pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
-	       ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff));
-
-	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
-
-	mac->mac = &gmac_ops;
-	mac->desc = &gmac_desc_ops;
-	mac->dma = &gmac_dma_ops;
-
-	mac->pmt = PMT_SUPPORTED;
-	mac->link.port = GMAC_CONTROL_PS;
-	mac->link.duplex = GMAC_CONTROL_DM;
-	mac->link.speed = GMAC_CONTROL_FES;
-	mac->mii.addr = GMAC_MII_ADDR;
-	mac->mii.data = GMAC_MII_DATA;
-
-	return mac;
-}
diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h
deleted file mode 100644
index 2e82d6c9a148..000000000000
--- a/drivers/net/stmmac/gmac.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*******************************************************************************
-  Copyright (C) 2007-2009  STMicroelectronics Ltd
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
-*******************************************************************************/
-
-#define GMAC_CONTROL		0x00000000	/* Configuration */
-#define GMAC_FRAME_FILTER	0x00000004	/* Frame Filter */
-#define GMAC_HASH_HIGH		0x00000008	/* Multicast Hash Table High */
-#define GMAC_HASH_LOW		0x0000000c	/* Multicast Hash Table Low */
-#define GMAC_MII_ADDR		0x00000010	/* MII Address */
-#define GMAC_MII_DATA		0x00000014	/* MII Data */
-#define GMAC_FLOW_CTRL		0x00000018	/* Flow Control */
-#define GMAC_VLAN_TAG		0x0000001c	/* VLAN Tag */
-#define GMAC_VERSION		0x00000020	/* GMAC CORE Version */
-#define GMAC_WAKEUP_FILTER	0x00000028	/* Wake-up Frame Filter */
-
-#define GMAC_INT_STATUS		0x00000038	/* interrupt status register */
-enum gmac_irq_status {
-	time_stamp_irq = 0x0200,
-	mmc_rx_csum_offload_irq = 0x0080,
-	mmc_tx_irq = 0x0040,
-	mmc_rx_irq = 0x0020,
-	mmc_irq = 0x0010,
-	pmt_irq = 0x0008,
-	pcs_ane_irq = 0x0004,
-	pcs_link_irq = 0x0002,
-	rgmii_irq = 0x0001,
-};
-#define GMAC_INT_MASK		0x0000003c	/* interrupt mask register */
-
-/* PMT Control and Status */
-#define GMAC_PMT		0x0000002c
-enum power_event {
-	pointer_reset = 0x80000000,
-	global_unicast = 0x00000200,
-	wake_up_rx_frame = 0x00000040,
-	magic_frame = 0x00000020,
-	wake_up_frame_en = 0x00000004,
-	magic_pkt_en = 0x00000002,
-	power_down = 0x00000001,
-};
-
-/* GMAC HW ADDR regs */
-#define GMAC_ADDR_HIGH(reg)		(0x00000040+(reg * 8))
-#define GMAC_ADDR_LOW(reg)		(0x00000044+(reg * 8))
-#define GMAC_MAX_UNICAST_ADDRESSES	16
-
-#define GMAC_AN_CTRL	0x000000c0	/* AN control */
-#define GMAC_AN_STATUS	0x000000c4	/* AN status */
-#define GMAC_ANE_ADV	0x000000c8	/* Auto-Neg. Advertisement */
-#define GMAC_ANE_LINK	0x000000cc	/* Auto-Neg. link partener ability */
-#define GMAC_ANE_EXP	0x000000d0	/* ANE expansion */
-#define GMAC_TBI	0x000000d4	/* TBI extend status */
-#define GMAC_GMII_STATUS 0x000000d8	/* S/R-GMII status */
-
-/* GMAC Configuration defines */
-#define GMAC_CONTROL_TC	0x01000000	/* Transmit Conf. in RGMII/SGMII */
-#define GMAC_CONTROL_WD	0x00800000	/* Disable Watchdog on receive */
-#define GMAC_CONTROL_JD	0x00400000	/* Jabber disable */
-#define GMAC_CONTROL_BE	0x00200000	/* Frame Burst Enable */
-#define GMAC_CONTROL_JE	0x00100000	/* Jumbo frame */
-enum inter_frame_gap {
-	GMAC_CONTROL_IFG_88 = 0x00040000,
-	GMAC_CONTROL_IFG_80 = 0x00020000,
-	GMAC_CONTROL_IFG_40 = 0x000e0000,
-};
-#define GMAC_CONTROL_DCRS	0x00010000 /* Disable carrier sense during tx */
-#define GMAC_CONTROL_PS		0x00008000 /* Port Select 0:GMI 1:MII */
-#define GMAC_CONTROL_FES	0x00004000 /* Speed 0:10 1:100 */
-#define GMAC_CONTROL_DO		0x00002000 /* Disable Rx Own */
-#define GMAC_CONTROL_LM		0x00001000 /* Loop-back mode */
-#define GMAC_CONTROL_DM		0x00000800 /* Duplex Mode */
-#define GMAC_CONTROL_IPC	0x00000400 /* Checksum Offload */
-#define GMAC_CONTROL_DR		0x00000200 /* Disable Retry */
-#define GMAC_CONTROL_LUD	0x00000100 /* Link up/down */
-#define GMAC_CONTROL_ACS	0x00000080 /* Automatic Pad Stripping */
-#define GMAC_CONTROL_DC		0x00000010 /* Deferral Check */
-#define GMAC_CONTROL_TE		0x00000008 /* Transmitter Enable */
-#define GMAC_CONTROL_RE		0x00000004 /* Receiver Enable */
-
-#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
-			GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE)
-
-/* GMAC Frame Filter defines */
-#define GMAC_FRAME_FILTER_PR	0x00000001	/* Promiscuous Mode */
-#define GMAC_FRAME_FILTER_HUC	0x00000002	/* Hash Unicast */
-#define GMAC_FRAME_FILTER_HMC	0x00000004	/* Hash Multicast */
-#define GMAC_FRAME_FILTER_DAIF	0x00000008	/* DA Inverse Filtering */
-#define GMAC_FRAME_FILTER_PM	0x00000010	/* Pass all multicast */
-#define GMAC_FRAME_FILTER_DBF	0x00000020	/* Disable Broadcast frames */
-#define GMAC_FRAME_FILTER_SAIF	0x00000100	/* Inverse Filtering */
-#define GMAC_FRAME_FILTER_SAF	0x00000200	/* Source Address Filter */
-#define GMAC_FRAME_FILTER_HPF	0x00000400	/* Hash or perfect Filter */
-#define GMAC_FRAME_FILTER_RA	0x80000000	/* Receive all mode */
-/* GMII ADDR  defines */
-#define GMAC_MII_ADDR_WRITE	0x00000002	/* MII Write */
-#define GMAC_MII_ADDR_BUSY	0x00000001	/* MII Busy */
-/* GMAC FLOW CTRL defines */
-#define GMAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
-#define GMAC_FLOW_CTRL_PT_SHIFT	16
-#define GMAC_FLOW_CTRL_RFE	0x00000004	/* Rx Flow Control Enable */
-#define GMAC_FLOW_CTRL_TFE	0x00000002	/* Tx Flow Control Enable */
-#define GMAC_FLOW_CTRL_FCB_BPA	0x00000001	/* Flow Control Busy ... */
-
-/*--- DMA BLOCK defines ---*/
-/* DMA Bus Mode register defines */
-#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
-#define DMA_BUS_MODE_DA		0x00000002	/* Arbitration scheme */
-#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
-#define DMA_BUS_MODE_DSL_SHIFT	2	/*   (in DWORDS)      */
-/* Programmable burst length (passed thorugh platform)*/
-#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
-#define DMA_BUS_MODE_PBL_SHIFT	8
-
-enum rx_tx_priority_ratio {
-	double_ratio = 0x00004000,	/*2:1 */
-	triple_ratio = 0x00008000,	/*3:1 */
-	quadruple_ratio = 0x0000c000,	/*4:1 */
-};
-
-#define DMA_BUS_MODE_FB		0x00010000	/* Fixed burst */
-#define DMA_BUS_MODE_RPBL_MASK	0x003e0000	/* Rx-Programmable Burst Len */
-#define DMA_BUS_MODE_RPBL_SHIFT	17
-#define DMA_BUS_MODE_USP	0x00800000
-#define DMA_BUS_MODE_4PBL	0x01000000
-#define DMA_BUS_MODE_AAL	0x02000000
-
-/* DMA CRS Control and Status Register Mapping */
-#define DMA_HOST_TX_DESC	  0x00001048	/* Current Host Tx descriptor */
-#define DMA_HOST_RX_DESC	  0x0000104c	/* Current Host Rx descriptor */
-/*  DMA Bus Mode register defines */
-#define DMA_BUS_PR_RATIO_MASK	  0x0000c000	/* Rx/Tx priority ratio */
-#define DMA_BUS_PR_RATIO_SHIFT	  14
-#define DMA_BUS_FB	  	  0x00010000	/* Fixed Burst */
-
-/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
-#define DMA_CONTROL_DT		0x04000000 /* Disable Drop TCP/IP csum error */
-#define DMA_CONTROL_RSF		0x02000000 /* Receive Store and Forward */
-#define DMA_CONTROL_DFF		0x01000000 /* Disaable flushing */
-/* Threshold for Activating the FC */
-enum rfa {
-	act_full_minus_1 = 0x00800000,
-	act_full_minus_2 = 0x00800200,
-	act_full_minus_3 = 0x00800400,
-	act_full_minus_4 = 0x00800600,
-};
-/* Threshold for Deactivating the FC */
-enum rfd {
-	deac_full_minus_1 = 0x00400000,
-	deac_full_minus_2 = 0x00400800,
-	deac_full_minus_3 = 0x00401000,
-	deac_full_minus_4 = 0x00401800,
-};
-#define DMA_CONTROL_TSF		0x00200000 /* Transmit  Store and Forward */
-#define DMA_CONTROL_FTF		0x00100000 /* Flush transmit FIFO */
-
-enum ttc_control {
-	DMA_CONTROL_TTC_64 = 0x00000000,
-	DMA_CONTROL_TTC_128 = 0x00004000,
-	DMA_CONTROL_TTC_192 = 0x00008000,
-	DMA_CONTROL_TTC_256 = 0x0000c000,
-	DMA_CONTROL_TTC_40 = 0x00010000,
-	DMA_CONTROL_TTC_32 = 0x00014000,
-	DMA_CONTROL_TTC_24 = 0x00018000,
-	DMA_CONTROL_TTC_16 = 0x0001c000,
-};
-#define DMA_CONTROL_TC_TX_MASK	0xfffe3fff
-
-#define DMA_CONTROL_EFC		0x00000100
-#define DMA_CONTROL_FEF		0x00000080
-#define DMA_CONTROL_FUF		0x00000040
-
-enum rtc_control {
-	DMA_CONTROL_RTC_64 = 0x00000000,
-	DMA_CONTROL_RTC_32 = 0x00000008,
-	DMA_CONTROL_RTC_96 = 0x00000010,
-	DMA_CONTROL_RTC_128 = 0x00000018,
-};
-#define DMA_CONTROL_TC_RX_MASK	0xffffffe7
-
-#define DMA_CONTROL_OSF	0x00000004	/* Operate on second frame */
-
-/* MMC registers offset */
-#define GMAC_MMC_CTRL      0x100
-#define GMAC_MMC_RX_INTR   0x104
-#define GMAC_MMC_TX_INTR   0x108
-#define GMAC_MMC_RX_CSUM_OFFLOAD   0x208
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index e79e00b6f147..16d4e1cecf8f 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1583,7 +1583,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 	struct mac_device_info *device;
 
 	if (priv->is_gmac)
-		device = gmac_setup(ioaddr);
+		device = dwmac1000_setup(ioaddr);
 	else
 		device = dwmac100_setup(ioaddr);
 
-- 
cgit v1.2.3


From 5e33c791233b7da47b5403344a915c1b7edaaad8 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:21 +0000
Subject: stmmac: include netdevice.h into the common.h header

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/common.h      | 2 +-
 drivers/net/stmmac/dwmac100.c    | 1 -
 drivers/net/stmmac/dwmac1000.h   | 1 -
 drivers/net/stmmac/stmmac_main.c | 1 -
 drivers/net/stmmac/stmmac_mdio.c | 1 -
 5 files changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 25b53d411516..7267bcd43d06 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -23,7 +23,7 @@
 *******************************************************************************/
 
 #include "descs.h"
-#include <linux/io.h>
+#include <linux/netdevice.h>
 
 struct stmmac_extra_stats {
 	/* Transmit errors */
diff --git a/drivers/net/stmmac/dwmac100.c b/drivers/net/stmmac/dwmac100.c
index 010c8b206359..82dde774d4c5 100644
--- a/drivers/net/stmmac/dwmac100.c
+++ b/drivers/net/stmmac/dwmac100.c
@@ -26,7 +26,6 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#include <linux/netdevice.h>
 #include <linux/crc32.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
diff --git a/drivers/net/stmmac/dwmac1000.h b/drivers/net/stmmac/dwmac1000.h
index 3d54d6c99129..62dca0e384e7 100644
--- a/drivers/net/stmmac/dwmac1000.h
+++ b/drivers/net/stmmac/dwmac1000.h
@@ -20,7 +20,6 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#include <linux/netdevice.h>
 #include <linux/phy.h>
 #include "common.h"
 
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 16d4e1cecf8f..a6733612d64a 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -32,7 +32,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/ip.h>
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
index 131e0a603711..fffe1d037fe6 100644
--- a/drivers/net/stmmac/stmmac_mdio.c
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -24,7 +24,6 @@
   Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#include <linux/netdevice.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 
-- 
cgit v1.2.3


From 7187c1ad1a2a005fa24aa14fa5b0e4c8322c0cd2 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:22 +0000
Subject: stmmac: improve Kconfig help

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/Kconfig | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig
index 35eaa5251d7f..fb287649a305 100644
--- a/drivers/net/stmmac/Kconfig
+++ b/drivers/net/stmmac/Kconfig
@@ -4,8 +4,9 @@ config STMMAC_ETH
 	select PHYLIB
 	depends on NETDEVICES && CPU_SUBTYPE_ST40
 	help
-	  This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
-	  controllers. ST Ethernet IPs are built around a Synopsys IP Core.
+	  This is the driver for the Ethernet IPs are built around a
+	  Synopsys IP Core and fully tested on the STMicroelectronics
+	  platforms.
 
 if STMMAC_ETH
 
@@ -32,7 +33,8 @@ config STMMAC_TIMER
 	default n
 	help
 	  Use an external timer for mitigating the number of network
-	  interrupts.
+	  interrupts. Currently, for SH architectures, it is possible
+	  to use the TMU channel 2 and the SH-RTC device.
 
 choice
         prompt "Select Timer device"
-- 
cgit v1.2.3


From 108316c1bd0a75ba855ce4a6540c530e1562bfb0 Mon Sep 17 00:00:00 2001
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Wed, 6 Jan 2010 23:07:23 +0000
Subject: stmmac: update the driver's module version

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/stmmac.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 44421d9667a8..ba35e6943cf4 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -20,7 +20,7 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#define DRV_MODULE_VERSION	"Oct_09"
+#define DRV_MODULE_VERSION	"Jan_2010"
 #include <linux/stmmac.h>
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-- 
cgit v1.2.3


From a3aa18842a5303fc28fcc4d57dbd16618bd830a0 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 7 Jan 2010 11:58:11 +0000
Subject: drivers/net/: use DEFINE_PCI_DEVICE_TABLE()

Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section
in every case.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/3c59x.c                           | 2 +-
 drivers/net/8139cp.c                          | 2 +-
 drivers/net/8139too.c                         | 2 +-
 drivers/net/acenic.c                          | 2 +-
 drivers/net/amd8111e.c                        | 2 +-
 drivers/net/arcnet/com20020-pci.c             | 2 +-
 drivers/net/atl1c/atl1c_main.c                | 2 +-
 drivers/net/atl1e/atl1e_main.c                | 2 +-
 drivers/net/atlx/atl1.c                       | 2 +-
 drivers/net/atlx/atl2.c                       | 2 +-
 drivers/net/b44.c                             | 2 +-
 drivers/net/bnx2x_main.c                      | 2 +-
 drivers/net/can/sja1000/ems_pci.c             | 2 +-
 drivers/net/can/sja1000/kvaser_pci.c          | 2 +-
 drivers/net/cassini.c                         | 2 +-
 drivers/net/chelsio/common.h                  | 2 +-
 drivers/net/chelsio/subr.c                    | 2 +-
 drivers/net/cxgb3/cxgb3_main.c                | 2 +-
 drivers/net/defxx.c                           | 2 +-
 drivers/net/dl2k.h                            | 2 +-
 drivers/net/e100.c                            | 2 +-
 drivers/net/e1000/e1000_main.c                | 2 +-
 drivers/net/e1000e/netdev.c                   | 2 +-
 drivers/net/enic/enic_main.c                  | 2 +-
 drivers/net/epic100.c                         | 2 +-
 drivers/net/fealnx.c                          | 2 +-
 drivers/net/forcedeth.c                       | 2 +-
 drivers/net/hamachi.c                         | 2 +-
 drivers/net/hp100.c                           | 2 +-
 drivers/net/igb/igb_main.c                    | 2 +-
 drivers/net/igbvf/netdev.c                    | 2 +-
 drivers/net/ioc3-eth.c                        | 2 +-
 drivers/net/ipg.c                             | 2 +-
 drivers/net/irda/donauboe.c                   | 2 +-
 drivers/net/irda/via-ircc.c                   | 2 +-
 drivers/net/irda/vlsi_ir.c                    | 2 +-
 drivers/net/ixgb/ixgb_main.c                  | 2 +-
 drivers/net/ixgbe/ixgbe_main.c                | 2 +-
 drivers/net/jme.c                             | 2 +-
 drivers/net/mlx4/main.c                       | 2 +-
 drivers/net/myri10ge/myri10ge.c               | 2 +-
 drivers/net/natsemi.c                         | 2 +-
 drivers/net/ne2k-pci.c                        | 2 +-
 drivers/net/netxen/netxen_nic_main.c          | 2 +-
 drivers/net/niu.c                             | 2 +-
 drivers/net/ns83820.c                         | 2 +-
 drivers/net/pasemi_mac.c                      | 2 +-
 drivers/net/pci-skeleton.c                    | 2 +-
 drivers/net/pcnet32.c                         | 2 +-
 drivers/net/qla3xxx.c                         | 2 +-
 drivers/net/qlge/qlge_main.c                  | 2 +-
 drivers/net/r6040.c                           | 2 +-
 drivers/net/r8169.c                           | 2 +-
 drivers/net/rrunner.c                         | 2 +-
 drivers/net/s2io.c                            | 2 +-
 drivers/net/sc92031.c                         | 2 +-
 drivers/net/sfc/efx.c                         | 2 +-
 drivers/net/sis190.c                          | 2 +-
 drivers/net/sis900.c                          | 2 +-
 drivers/net/skfp/skfddi.c                     | 2 +-
 drivers/net/skge.c                            | 2 +-
 drivers/net/smsc9420.c                        | 2 +-
 drivers/net/spider_net.c                      | 2 +-
 drivers/net/starfire.c                        | 2 +-
 drivers/net/sundance.c                        | 2 +-
 drivers/net/sungem.c                          | 2 +-
 drivers/net/sunhme.c                          | 2 +-
 drivers/net/tc35815.c                         | 2 +-
 drivers/net/tehuti.c                          | 2 +-
 drivers/net/tg3.c                             | 2 +-
 drivers/net/tlan.c                            | 2 +-
 drivers/net/tokenring/3c359.c                 | 2 +-
 drivers/net/tokenring/abyss.c                 | 2 +-
 drivers/net/tokenring/lanstreamer.c           | 2 +-
 drivers/net/tokenring/olympic.c               | 2 +-
 drivers/net/tokenring/tmspci.c                | 2 +-
 drivers/net/tulip/de2104x.c                   | 2 +-
 drivers/net/tulip/dmfe.c                      | 2 +-
 drivers/net/tulip/tulip_core.c                | 2 +-
 drivers/net/tulip/uli526x.c                   | 2 +-
 drivers/net/tulip/winbond-840.c               | 2 +-
 drivers/net/tulip/xircom_cb.c                 | 2 +-
 drivers/net/typhoon.c                         | 2 +-
 drivers/net/via-rhine.c                       | 2 +-
 drivers/net/via-velocity.c                    | 2 +-
 drivers/net/vmxnet3/vmxnet3_drv.c             | 2 +-
 drivers/net/vxge/vxge-main.c                  | 2 +-
 drivers/net/wan/dscc4.c                       | 2 +-
 drivers/net/wan/farsync.c                     | 2 +-
 drivers/net/wan/lmc/lmc_main.c                | 2 +-
 drivers/net/wan/pc300_drv.c                   | 2 +-
 drivers/net/wan/pc300too.c                    | 2 +-
 drivers/net/wan/pci200syn.c                   | 2 +-
 drivers/net/wan/wanxl.c                       | 2 +-
 drivers/net/wireless/adm8211.c                | 2 +-
 drivers/net/wireless/airo.c                   | 2 +-
 drivers/net/wireless/ath/ath5k/base.c         | 2 +-
 drivers/net/wireless/ath/ath9k/pci.c          | 2 +-
 drivers/net/wireless/atmel_pci.c              | 2 +-
 drivers/net/wireless/hostap/hostap_pci.c      | 2 +-
 drivers/net/wireless/hostap/hostap_plx.c      | 2 +-
 drivers/net/wireless/ipw2x00/ipw2100.c        | 2 +-
 drivers/net/wireless/ipw2x00/ipw2200.c        | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945.c       | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945.h       | 2 +-
 drivers/net/wireless/iwlwifi/iwl-agn.c        | 2 +-
 drivers/net/wireless/orinoco/orinoco_nortel.c | 2 +-
 drivers/net/wireless/orinoco/orinoco_pci.c    | 2 +-
 drivers/net/wireless/orinoco/orinoco_plx.c    | 2 +-
 drivers/net/wireless/orinoco/orinoco_tmd.c    | 2 +-
 drivers/net/wireless/p54/p54pci.c             | 2 +-
 drivers/net/wireless/prism54/islpci_hotplug.c | 2 +-
 drivers/net/wireless/rt2x00/rt2400pci.c       | 2 +-
 drivers/net/wireless/rt2x00/rt2500pci.c       | 2 +-
 drivers/net/wireless/rt2x00/rt2800pci.c       | 2 +-
 drivers/net/wireless/rt2x00/rt61pci.c         | 2 +-
 drivers/net/wireless/rtl818x/rtl8180_dev.c    | 2 +-
 drivers/net/yellowfin.c                       | 2 +-
 118 files changed, 118 insertions(+), 118 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 39db0e96815d..5df46c230b07 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -375,7 +375,7 @@ static struct vortex_chip_info {
 };
 
 
-static struct pci_device_id vortex_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(vortex_pci_tbl) = {
 	{ 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 },
 	{ 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 },
 	{ 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 },
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 3f452bcbfb9e..9d59654748b1 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -394,7 +394,7 @@ static int cp_get_eeprom(struct net_device *dev,
 static int cp_set_eeprom(struct net_device *dev,
 			 struct ethtool_eeprom *eeprom, u8 *data);
 
-static struct pci_device_id cp_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(cp_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	PCI_DEVICE_ID_REALTEK_8139), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TTTECH,	PCI_DEVICE_ID_TTTECH_MC322), },
 	{ },
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 907f2d583db8..321e73aabb2b 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -231,7 +231,7 @@ static const struct {
 };
 
 
-static const struct pci_device_id rtl8139_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
 	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index d82a9a994753..ec624ab03e88 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -134,7 +134,7 @@
 #define PCI_DEVICE_ID_SGI_ACENIC	0x0009
 #endif
 
-static struct pci_device_id acenic_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(acenic_pci_tbl) = {
 	{ PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE,
 	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, },
 	{ PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_COPPER,
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 766aabfdfc75..545c791f477e 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -113,7 +113,7 @@ MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0
 module_param_array(dynamic_ipg, bool, NULL, 0);
 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
 
-static struct pci_device_id amd8111e_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(amd8111e_pci_tbl) = {
 
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index dbf4de39754d..b68e1eb405ff 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -144,7 +144,7 @@ static void __devexit com20020pci_remove(struct pci_dev *pdev)
 	free_netdev(dev);
 }
 
-static struct pci_device_id com20020pci_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(com20020pci_id_table) = {
 	{ 0x1571, 0xa001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1571, 0xa002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1571, 0xa003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 77cde859620c..d98095df05be 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -35,7 +35,7 @@ char atl1c_driver_version[] = ATL1C_DRV_VERSION;
  * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
  *   Class, Class Mask, private data (not used) }
  */
-static struct pci_device_id atl1c_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)},
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)},
 	/* required last entry */
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 2080d444068b..d59f8e89c65d 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -35,7 +35,7 @@ char atl1e_driver_version[] = DRV_VERSION;
  * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
  *   Class, Class Mask, private data (not used) }
  */
-static struct pci_device_id atl1e_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(atl1e_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
 	/* required last entry */
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index b6cf3263127c..9ba547069db3 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -232,7 +232,7 @@ static void __devinit atl1_check_options(struct atl1_adapter *adapter)
 /*
  * atl1_pci_tbl - PCI Device ID Table
  */
-static const struct pci_device_id atl1_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(atl1_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
 	/* required last entry */
 	{0,}
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index c0451d75cdcf..255e4e7ea0ee 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -63,7 +63,7 @@ MODULE_VERSION(ATL2_DRV_VERSION);
 /*
  * atl2_pci_tbl - PCI Device ID Table
  */
-static struct pci_device_id atl2_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(atl2_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)},
 	/* required last entry */
 	{0,}
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 4869adb69586..44b66be38134 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -102,7 +102,7 @@ MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
 
 
 #ifdef CONFIG_B44_PCI
-static const struct pci_device_id b44_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(b44_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1) },
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 77ba13520d87..0bfdf30ea4d1 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -140,7 +140,7 @@ static struct {
 };
 
 
-static const struct pci_device_id bnx2x_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index fd04789d3370..87300606abb9 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -102,7 +102,7 @@ struct ems_pci_card {
 
 #define EMS_PCI_BASE_SIZE  4096 /* size of controller area */
 
-static struct pci_device_id ems_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(ems_pci_tbl) = {
 	/* CPC-PCI v1 */
 	{PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,},
 	/* CPC-PCI v2 */
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
index 7dd7769b9713..441e776a7f59 100644
--- a/drivers/net/can/sja1000/kvaser_pci.c
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -109,7 +109,7 @@ struct kvaser_pci {
 #define KVASER_PCI_VENDOR_ID2     0x1a07    /* the PCI device and vendor IDs */
 #define KVASER_PCI_DEVICE_ID2     0x0008
 
-static struct pci_device_id kvaser_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(kvaser_pci_tbl) = {
 	{KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
 	{KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
 	{ 0,}
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index f857afe8e488..b3a038c23af1 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -236,7 +236,7 @@ static u16 link_modes[] __devinitdata = {
 	CAS_BMCR_SPEED1000|BMCR_FULLDPLX /* 5 : 1000bt full duplex */
 };
 
-static struct pci_device_id cas_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(cas_pci_tbl) = {
 	{ PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_CASSINI,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SATURN,
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 699d22c5fe09..f6462b54f823 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -334,7 +334,7 @@ static inline int t1_is_asic(const adapter_t *adapter)
 	return adapter->params.is_asic;
 }
 
-extern struct pci_device_id t1_pci_tbl[];
+extern const struct pci_device_id t1_pci_tbl[];
 
 static inline int adapter_matches_type(const adapter_t *adapter,
 				       int version, int revision)
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 17720c6e5bfe..2402d372c886 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -528,7 +528,7 @@ static const struct board_info t1_board[] = {
 
 };
 
-struct pci_device_id t1_pci_tbl[] = {
+DEFINE_PCI_DEVICE_TABLE(t1_pci_tbl) = {
 	CH_DEVICE(8, 0, CH_BRD_T110_1CU),
 	CH_DEVICE(8, 1, CH_BRD_T110_1CU),
 	CH_DEVICE(7, 0, CH_BRD_N110_1F),
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 89bec9c3c141..73622f5312cb 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -80,7 +80,7 @@ enum {
 #define CH_DEVICE(devid, idx) \
 	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx }
 
-static const struct pci_device_id cxgb3_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(cxgb3_pci_tbl) = {
 	CH_DEVICE(0x20, 0),	/* PE9000 */
 	CH_DEVICE(0x21, 1),	/* T302E */
 	CH_DEVICE(0x22, 2),	/* T310E */
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index e4eac4bcdf83..98da085445e6 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -3628,7 +3628,7 @@ static int __devinit dfx_pci_register(struct pci_dev *,
 				      const struct pci_device_id *);
 static void __devexit dfx_pci_unregister(struct pci_dev *);
 
-static struct pci_device_id dfx_pci_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(dfx_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI) },
 	{ }
 };
diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h
index 266ec8777ca8..7caab3d26a9e 100644
--- a/drivers/net/dl2k.h
+++ b/drivers/net/dl2k.h
@@ -537,7 +537,7 @@ struct netdev_private {
         driver_data             Data private to the driver.
 */
 
-static const struct pci_device_id rio_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(rio_pci_tbl) = {
 	{0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, },
 	{0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, },
 	{ }
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 839fb2b136d3..5c7a155e849a 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -208,7 +208,7 @@ MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
 #define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
 	PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
 	PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
-static struct pci_device_id e100_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(e100_id_table) = {
 	INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
 	INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
 	INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 7e855f9bbd97..9ec7480be1d8 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -42,7 +42,7 @@ static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation
  * Macro expands to...
  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  */
-static struct pci_device_id e1000_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 	INTEL_E1000_ETHERNET_DEVICE(0x1000),
 	INTEL_E1000_ETHERNET_DEVICE(0x1001),
 	INTEL_E1000_ETHERNET_DEVICE(0x1004),
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 762b697ce731..9ccb9010dc5b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -5325,7 +5325,7 @@ static struct pci_error_handlers e1000_err_handler = {
 	.resume = e1000_io_resume,
 };
 
-static struct pci_device_id e1000_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index d87935ad1130..c81bc4b1816f 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -51,7 +51,7 @@
 #define PCI_DEVICE_ID_CISCO_VIC_ENET         0x0043  /* ethernet vnic */
 
 /* Supported devices */
-static struct pci_device_id enic_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(enic_id_table) = {
 	{ PCI_VDEVICE(CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET) },
 	{ 0, }	/* end of table */
 };
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 41494f7b2ec8..1f8b11449fad 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -167,7 +167,7 @@ static const struct epic_chip_info pci_id_tbl[] = {
 };
 
 
-static struct pci_device_id epic_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(epic_pci_tbl) = {
 	{ 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
 	{ 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
 	{ 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index dac4e595589e..e6a98129d787 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1941,7 +1941,7 @@ static int netdev_close(struct net_device *dev)
 	return 0;
 }
 
-static struct pci_device_id fealnx_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(fealnx_pci_tbl) = {
 	{0x1516, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1516, 0x0803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
 	{0x1516, 0x0891, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 3c340489804a..3eb713b014f9 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -6198,7 +6198,7 @@ static void nv_shutdown(struct pci_dev *pdev)
 #define nv_resume NULL
 #endif /* CONFIG_PM */
 
-static struct pci_device_id pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(pci_tbl) = {
 	{	/* nForce Ethernet Controller */
 		PCI_DEVICE(0x10DE, 0x01C3),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index ea85075a89a2..dd72c5025e6a 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1990,7 +1990,7 @@ static void __devexit hamachi_remove_one (struct pci_dev *pdev)
 	}
 }
 
-static struct pci_device_id hamachi_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(hamachi_pci_tbl) = {
 	{ 0x1318, 0x0911, PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, }
 };
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 90f890e7c5e1..0c2f2e8b1c47 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -210,7 +210,7 @@ MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl);
 #endif
 
 #ifdef CONFIG_PCI
-static struct pci_device_id hp100_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(hp100_pci_tbl) = {
 	{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,},
 	{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,},
 	{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2970A, PCI_ANY_ID, PCI_ANY_ID,},
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 78963a0e128d..484fbc83739f 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -60,7 +60,7 @@ static const struct e1000_info *igb_info_tbl[] = {
 	[board_82575] = &e1000_82575_info,
 };
 
-static struct pci_device_id igb_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 1326232c1d32..ca0d1906e83e 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2876,7 +2876,7 @@ static struct pci_error_handlers igbvf_err_handler = {
 	.resume = igbvf_io_resume,
 };
 
-static struct pci_device_id igbvf_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(igbvf_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
 	{ } /* terminate list */
 };
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 8ec15ab8c8c2..81a4c5d30733 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1383,7 +1383,7 @@ static void __devexit ioc3_remove_one (struct pci_dev *pdev)
 	 */
 }
 
-static struct pci_device_id ioc3_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(ioc3_pci_tbl) = {
 	{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
 	{ 0 }
 };
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index ba8d246d05a0..49f35e2ed19f 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -92,7 +92,7 @@ static const char *ipg_brand_name[] = {
 	"D-Link NIC IP1000A"
 };
 
-static struct pci_device_id ipg_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(ipg_pci_tbl) = {
 	{ PCI_VDEVICE(SUNDANCE,	0x1023), 0 },
 	{ PCI_VDEVICE(SUNDANCE,	0x2021), 1 },
 	{ PCI_VDEVICE(SUNDANCE,	0x1021), 2 },
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 2d7b5c1d5572..b7e6625ca75e 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -184,7 +184,7 @@
 #define CONFIG0H_DMA_ON_NORX CONFIG0H_DMA_OFF| OBOE_CONFIG0H_ENDMAC
 #define CONFIG0H_DMA_ON CONFIG0H_DMA_ON_NORX | OBOE_CONFIG0H_ENRX
 
-static struct pci_device_id toshoboe_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(toshoboe_pci_tbl) = {
 	{ PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701, PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIRD01, PCI_ANY_ID, PCI_ANY_ID, },
 	{ }			/* Terminating entry */
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index fddb4efd5453..6533c010cf5c 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -121,7 +121,7 @@ static void iodelay(int udelay)
 	}
 }
 
-static struct pci_device_id via_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(via_pci_tbl) = {
 	{ PCI_VENDOR_ID_VIA, 0x8231, PCI_ANY_ID, PCI_ANY_ID,0,0,0 },
 	{ PCI_VENDOR_ID_VIA, 0x3109, PCI_ANY_ID, PCI_ANY_ID,0,0,1 },
 	{ PCI_VENDOR_ID_VIA, 0x3074, PCI_ANY_ID, PCI_ANY_ID,0,0,2 },
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index bd3c6b5ee76a..209d4bcfaced 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -59,7 +59,7 @@ MODULE_LICENSE("GPL");
 
 static /* const */ char drivername[] = DRIVER_NAME;
 
-static struct pci_device_id vlsi_irda_table [] = {
+static DEFINE_PCI_DEVICE_TABLE(vlsi_irda_table) = {
 	{
 		.class =        PCI_CLASS_WIRELESS_IRDA << 8,
 		.class_mask =	PCI_CLASS_SUBCLASS_MASK << 8, 
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index bcd0f01d5feb..6c2d9366fe5e 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -50,7 +50,7 @@ MODULE_PARM_DESC(copybreak,
  * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
  *   Class, Class Mask, private data (not used) }
  */
-static struct pci_device_id ixgb_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(ixgb_pci_tbl) = {
 	{INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_CX4,
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index bd64387563f0..b2f11d45e225 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -67,7 +67,7 @@ static const struct ixgbe_info *ixgbe_info_tbl[] = {
  * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
  *   Class, Class Mask, private data (not used) }
  */
-static struct pci_device_id ixgbe_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598),
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT),
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 792b88fc3574..26eed49d3208 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2994,7 +2994,7 @@ jme_resume(struct pci_dev *pdev)
 }
 #endif
 
-static struct pci_device_id jme_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(jme_pci_tbl) = {
 	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMC250) },
 	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMC260) },
 	{ }
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 291a505fd4fc..58f7f979cd2b 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1271,7 +1271,7 @@ int mlx4_restart_one(struct pci_dev *pdev)
 	return __mlx4_init_one(pdev, NULL);
 }
 
-static struct pci_device_id mlx4_pci_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = {
 	{ PCI_VDEVICE(MELLANOX, 0x6340) }, /* MT25408 "Hermon" SDR */
 	{ PCI_VDEVICE(MELLANOX, 0x634a) }, /* MT25408 "Hermon" DDR */
 	{ PCI_VDEVICE(MELLANOX, 0x6354) }, /* MT25408 "Hermon" QDR */
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 3fcb1c356e0d..c0884a9cba3c 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -4085,7 +4085,7 @@ static void myri10ge_remove(struct pci_dev *pdev)
 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 	0x0008
 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9	0x0009
 
-static struct pci_device_id myri10ge_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(myri10ge_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
 	{PCI_DEVICE
 	 (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 797fe164ce27..2d7b3bbfed01 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -247,7 +247,7 @@ static struct {
 	{ "NatSemi DP8381[56]", 0, 24 },
 };
 
-static struct pci_device_id natsemi_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(natsemi_pci_tbl) = {
 	{ PCI_VENDOR_ID_NS, 0x0020, 0x12d9,     0x000c,     0, 0, 0 },
 	{ PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 	{ }	/* terminate list */
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 3fcebb70151c..85aec4f10131 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -136,7 +136,7 @@ static struct {
 };
 
 
-static struct pci_device_id ne2k_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(ne2k_pci_tbl) = {
 	{ 0x10ec, 0x8029, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_RealTek_RTL_8029 },
 	{ 0x1050, 0x0940, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_89C940 },
 	{ 0x11f6, 0x1401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Compex_RL2000 },
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index f13a07f717c7..3fdfc9b7c5b2 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -100,7 +100,7 @@ static void netxen_config_indev_addr(struct net_device *dev, unsigned long);
 	{PCI_DEVICE(PCI_VENDOR_ID_NETXEN, (device)), \
 	.class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0}
 
-static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(netxen_pci_tbl) = {
 	ENTRY(PCI_DEVICE_ID_NX2031_10GXSR),
 	ENTRY(PCI_DEVICE_ID_NX2031_10GCX4),
 	ENTRY(PCI_DEVICE_ID_NX2031_4GCU),
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ce58c4c7dd3..920f0ecf7a0a 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -58,7 +58,7 @@ static void writeq(u64 val, void __iomem *reg)
 }
 #endif
 
-static struct pci_device_id niu_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(niu_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_SUN, 0xabcd)},
 	{}
 };
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 1f6327d41536..a3b6aa0f375d 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -2292,7 +2292,7 @@ static void __devexit ns83820_remove_one(struct pci_dev *pci_dev)
 	pci_set_drvdata(pci_dev, NULL);
 }
 
-static struct pci_device_id ns83820_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(ns83820_pci_tbl) = {
 	{ 0x100b, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, .driver_data = 0, },
 	{ 0, },
 };
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 1673eb045e1e..d44d4a208bbf 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -1875,7 +1875,7 @@ static void __devexit pasemi_mac_remove(struct pci_dev *pdev)
 	free_netdev(netdev);
 }
 
-static struct pci_device_id pasemi_mac_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(pasemi_mac_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa005) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa006) },
 	{ },
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8ff5536a3757..20273832bfce 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -211,7 +211,7 @@ static struct {
 };
 
 
-static const struct pci_device_id netdrv_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
 	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
 	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
 	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index dcc67a35e8f2..ed62ac6d9c0e 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -58,7 +58,7 @@ static const char *const version =
 /*
  * PCI device identifiers for "new style" Linux PCI Device Drivers
  */
-static struct pci_device_id pcnet32_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(pcnet32_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE), },
 
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index dd35066a7f8d..f922294fd349 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -61,7 +61,7 @@ static int msi;
 module_param(msi, int, 0);
 MODULE_PARM_DESC(msi, "Turn on Message Signaled Interrupts.");
 
-static struct pci_device_id ql3xxx_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(ql3xxx_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3022_DEVICE_ID)},
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3032_DEVICE_ID)},
 	/* required last entry */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 25561fbdb203..167a3dab2f18 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -73,7 +73,7 @@ static int qlge_irq_type = MSIX_IRQ;
 module_param(qlge_irq_type, int, MSIX_IRQ);
 MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
-static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(qlge_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8000)},
 	/* required last entry */
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index f03e2e4a15a8..d68ba7a58631 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1222,7 +1222,7 @@ static void __devexit r6040_remove_one(struct pci_dev *pdev)
 }
 
 
-static struct pci_device_id r6040_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(r6040_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RDC, 0x6040) },
 	{ 0 }
 };
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c403ce0a3d3a..c1bb24cf0793 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -168,7 +168,7 @@ static void rtl_hw_start_8169(struct net_device *);
 static void rtl_hw_start_8168(struct net_device *);
 static void rtl_hw_start_8101(struct net_device *);
 
-static struct pci_device_id rtl8169_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8129), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8136), 0, 0, RTL_CFG_2 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8167), 0, 0, RTL_CFG_0 },
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 20a71749154a..085f4ec896d3 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1688,7 +1688,7 @@ static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	}
 }
 
-static struct pci_device_id rr_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(rr_pci_tbl) = {
 	{ PCI_VENDOR_ID_ESSENTIAL, PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER,
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0,}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index cc4218667cba..ac6189005c79 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -523,7 +523,7 @@ module_param_array(rts_frm_len, uint, NULL, 0);
  * S2IO device table.
  * This table lists all the devices that this driver supports.
  */
-static struct pci_device_id s2io_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(s2io_tbl) = {
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
 	 PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index e35050322f97..fd8cb506a2bb 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1589,7 +1589,7 @@ out:
 	return 0;
 }
 
-static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(sc92031_pci_device_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
 	{ PCI_DEVICE(0x1088, 0x2031) },
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index f983e3b507cc..3591cc9c39c8 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1940,7 +1940,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
  **************************************************************************/
 
 /* PCI device ID table */
-static struct pci_device_id efx_pci_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(efx_pci_table) = {
 	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID),
 	 .driver_data = (unsigned long) &falcon_a1_nic_type},
 	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID),
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 31233b4c44a0..626de766443a 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -334,7 +334,7 @@ static const struct {
 	{ "SiS 191 PCI Gigabit Ethernet adapter" },
 };
 
-static struct pci_device_id sis190_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(sis190_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 },
 	{ 0, },
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 7360d4bbf75e..20c5ce474891 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -106,7 +106,7 @@ static const char * card_names[] = {
 	"SiS 900 PCI Fast Ethernet",
 	"SiS 7016 PCI Fast Ethernet"
 };
-static struct pci_device_id sis900_pci_tbl [] = {
+static DEFINE_PCI_DEVICE_TABLE(sis900_pci_tbl) = {
 	{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_900},
 	{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016,
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 1f9698c0fb64..6b955a4f19b2 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -149,7 +149,7 @@ extern void mac_drv_rx_mode(struct s_smc *smc, int mode);
 extern void mac_drv_clear_rx_queue(struct s_smc *smc);
 extern void enable_tx_irq(struct s_smc *smc, u_short queue);
 
-static struct pci_device_id skfddi_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(skfddi_pci_tbl) = {
 	{ PCI_VENDOR_ID_SK, PCI_DEVICE_ID_SK_FP, PCI_ANY_ID, PCI_ANY_ID, },
 	{ }			/* Terminating entry */
 };
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 379a3dc00163..5ff46eb18d0c 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,7 +78,7 @@ static int debug = -1;	/* defaults above */
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
-static const struct pci_device_id skge_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(skge_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 12f0f5d74e3c..1495a5dd4b46 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -80,7 +80,7 @@ struct smsc9420_pdata {
 	int last_carrier;
 };
 
-static const struct pci_device_id smsc9420_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(smsc9420_id_table) = {
 	{ PCI_VENDOR_ID_9420, PCI_DEVICE_ID_9420, PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, }
 };
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 218524857bfc..16191998ac67 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -72,7 +72,7 @@ MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
 
 char spider_net_driver_name[] = "spidernet";
 
-static struct pci_device_id spider_net_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(spider_net_pci_tbl) = {
 	{ PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 	{ 0, }
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 95db60adde41..c81252d9a57c 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -301,7 +301,7 @@ enum chipset {
 	CH_6915 = 0,
 };
 
-static struct pci_device_id starfire_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(starfire_pci_tbl) = {
 	{ 0x9004, 0x6915, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_6915 },
 	{ 0, }
 };
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index d58e1891ca60..0c972e560cf3 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -206,7 +206,7 @@ IVc. Errata
 #define USE_IO_OPS 1
 #endif
 
-static const struct pci_device_id sundance_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(sundance_pci_tbl) = {
 	{ 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 },
 	{ 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 },
 	{ 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 },
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index b571a1babab9..b55ceb88d93f 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -107,7 +107,7 @@ MODULE_LICENSE("GPL");
 #define GEM_MODULE_NAME	"gem"
 #define PFX GEM_MODULE_NAME ": "
 
-static struct pci_device_id gem_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(gem_pci_tbl) = {
 	{ PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_GEM,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
 
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 6762f1c6ec8a..76ccd31cbf50 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -3211,7 +3211,7 @@ static void __devexit happy_meal_pci_remove(struct pci_dev *pdev)
 	dev_set_drvdata(&pdev->dev, NULL);
 }
 
-static struct pci_device_id happymeal_pci_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(happymeal_pci_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_HAPPYMEAL) },
 	{ }			/* Terminating entry */
 };
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 75a669d48e5e..033408f589fb 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -65,7 +65,7 @@ static const struct {
 	{ "TOSHIBA TC35815/TX4939" },
 };
 
-static const struct pci_device_id tc35815_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tc35815_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815CF), .driver_data = TC35815CF },
 	{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_NWU), .driver_data = TC35815_NWU },
 	{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939), .driver_data = TC35815_TX4939 },
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 80b404f2b938..b907bee31fd5 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -64,7 +64,7 @@
 
 #include "tehuti.h"
 
-static struct pci_device_id __devinitdata bdx_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(bdx_pci_tbl) = {
 	{0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1FC9, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1FC9, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3a74d2168598..b0630cd093a3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -174,7 +174,7 @@ static int tg3_debug = -1;	/* -1 == use TG3_DEF_MSG_ENABLE as value */
 module_param(tg3_debug, int, 0);
 MODULE_PARM_DESC(tg3_debug, "Tigon3 bitmapped debugging message enable value");
 
-static struct pci_device_id tg3_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5700)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5701)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5702)},
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index fabaeffb3155..613943eb6e75 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -254,7 +254,7 @@ static struct board {
 	{ "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
 };
 
-static struct pci_device_id tlan_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tlan_pci_tbl) = {
 	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index cf552d1d9629..b0d7db9d8bb4 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -117,7 +117,7 @@ MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
  *	will be stuck with 1555 lines of hex #'s in the code.
  */
 
-static struct pci_device_id xl_pci_tbl[] =
+static DEFINE_PCI_DEVICE_TABLE(xl_pci_tbl) =
 {
 	{PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, },
 	{ }			/* terminate list */
diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index b9db1b5a58a3..515f122777ab 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c
@@ -45,7 +45,7 @@ static char version[] __devinitdata =
 
 #define ABYSS_IO_EXTENT 64
 
-static struct pci_device_id abyss_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(abyss_pci_tbl) = {
 	{ PCI_VENDOR_ID_MADGE, PCI_DEVICE_ID_MADGE_MK2,
 	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_TOKEN_RING << 8, 0x00ffffff, },
 	{ }			/* Terminating entry */
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index d6ccd59c7d07..3f9d5a25562e 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -146,7 +146,7 @@
 static char version[] = "LanStreamer.c v0.4.0 03/08/01 - Mike Sullivan\n"
                         "              v0.5.3 11/13/02 - Kent Yoder";
 
-static struct pci_device_id streamer_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(streamer_pci_tbl) = {
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_TR, PCI_ANY_ID, PCI_ANY_ID,},
 	{}	/* terminating entry */
 };
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index df32025c5132..f010a4dc5f19 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -172,7 +172,7 @@ module_param_array(message_level, int, NULL, 0) ;
 static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,};
 module_param_array(network_monitor, int, NULL, 0);
 
-static struct pci_device_id olympic_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(olympic_pci_tbl) = {
 	{PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,},
 	{ } 	/* Terminating Entry */
 };
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index f92fe86fdcae..d4c7c0c0a3d6 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -57,7 +57,7 @@ static struct card_info card_info_table[] = {
 	{ {0x03, 0x01}, "3Com Token Link Velocity"},
 };
 
-static struct pci_device_id tmspci_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tmspci_pci_tbl) = {
 	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TOKENRING, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_TR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 	{ PCI_VENDOR_ID_TCONRAD, PCI_DEVICE_ID_TCONRAD_TOKENRING, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d4255d44cb75..87ea39e2037d 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -337,7 +337,7 @@ static void de21041_media_timer (unsigned long data);
 static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media);
 
 
-static struct pci_device_id de_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(de_pci_tbl) = {
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index ad63621913c3..8153fdd0af91 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -2068,7 +2068,7 @@ static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
 
 
 
-static struct pci_device_id dmfe_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(dmfe_pci_tbl) = {
 	{ 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID },
 	{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
 	{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 0fa3140d65bf..64aa2d6af08b 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -207,7 +207,7 @@ struct tulip_chip_table tulip_tbl[] = {
 };
 
 
-static struct pci_device_id tulip_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tulip_pci_tbl) = {
 	{ 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
 	{ 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
 	{ 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 },
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index fa019cabc355..d549042a01df 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -1783,7 +1783,7 @@ static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
 }
 
 
-static struct pci_device_id uli526x_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = {
 	{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
 	{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
 	{ 0, }
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 869a7a0005f9..23395e1ff238 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -218,7 +218,7 @@ enum chip_capability_flags {
 	CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,
 };
 
-static const struct pci_device_id w840_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = {
 	{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153,     0, 0, 0 },
 	{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 	{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 9924c4c7e2d6..c84123fd635c 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -144,7 +144,7 @@ static int link_status(struct xircom_private *card);
 
 
 
-static struct pci_device_id xircom_pci_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = {
 	{0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,},
 	{0,},
 };
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 39f1fc650be6..6e4f754c4baf 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -215,7 +215,7 @@ static struct typhoon_card_info typhoon_card_info[] __devinitdata = {
  * bit 8 indicates if this is a (0) copper or (1) fiber card
  * bits 12-16 indicate card type: (0) client and (1) server
  */
-static struct pci_device_id typhoon_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(typhoon_pci_tbl) = {
 	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0,TYPHOON_TX },
 	{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_95,
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 593e01f64e9b..6bc924cd4583 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -266,7 +266,7 @@ enum rhine_quirks {
 /* Beware of PCI posted writes */
 #define IOSYNC	do { ioread8(ioaddr + StationAddr); } while (0)
 
-static const struct pci_device_id rhine_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = {
 	{ 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, },	/* VT86C100A */
 	{ 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6102 */
 	{ 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, },	/* 6105{,L,LOM} */
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index cee8fa2d2a9f..83fc3a8dd254 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -361,7 +361,7 @@ static struct velocity_info_tbl chip_info_table[] = {
  *	Describe the PCI device identifiers that we support in this
  *	device driver. Used for hotplug autoloading.
  */
-static const struct pci_device_id velocity_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
 	{ }
 };
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 9cc438282d77..b896f9386110 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -35,7 +35,7 @@ char vmxnet3_driver_name[] = "vmxnet3";
  * PCI Device ID Table
  * Last entry must be all 0s
  */
-static const struct pci_device_id vmxnet3_pciid_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(vmxnet3_pciid_table) = {
 	{PCI_VDEVICE(VMWARE, PCI_DEVICE_ID_VMWARE_VMXNET3)},
 	{0}
 };
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 5f0e7ea0d493..6466bc840e6d 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -54,7 +54,7 @@ MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O"
 	"Virtualized Server Adapter");
 
-static struct pci_device_id vxge_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(vxge_id_table) = {
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID,
 	PCI_ANY_ID},
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID,
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 3f759daf3ca4..f88c07c13197 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -2050,7 +2050,7 @@ static int __init dscc4_setup(char *str)
 __setup("dscc4.setup=", dscc4_setup);
 #endif
 
-static struct pci_device_id dscc4_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(dscc4_pci_tbl) = {
 	{ PCI_VENDOR_ID_SIEMENS, PCI_DEVICE_ID_SIEMENS_DSCC4,
 	        PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0,}
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 9bc2e3649157..40d724a8e020 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -528,7 +528,7 @@ static int fst_debug_mask = { FST_DEBUG };
 /*
  *      PCI ID lookup table
  */
-static struct pci_device_id fst_pci_dev_id[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(fst_pci_dev_id) = {
 	{PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID, 
 	 PCI_ANY_ID, 0, 0, FST_TYPE_T2P},
 
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 4b6f27e7c820..b27850377121 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -77,7 +77,7 @@
 
 static int LMC_PKT_BUF_SZ = 1542;
 
-static struct pci_device_id lmc_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(lmc_pci_tbl) = {
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
 	  PCI_VENDOR_ID_LMC, PCI_ANY_ID },
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index aec4d3955420..f4f1c00d0d23 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -251,7 +251,7 @@ static char rcsid[] =
 #undef	PC300_DEBUG_RX
 #undef	PC300_DEBUG_OTHER
 
-static struct pci_device_id cpc_pci_dev_id[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(cpc_pci_dev_id) = {
 	/* PC300/RSV or PC300/X21, 2 chan */
 	{0x120e, 0x300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x300},
 	/* PC300/RSV or PC300/X21, 1 chan */
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index 60ece54bdd94..c7ab3becd261 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -481,7 +481,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 
 
 
-static struct pci_device_id pc300_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(pc300_pci_tbl) = {
 	{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
 	  PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index f1340faaf022..e2cff64a446a 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -417,7 +417,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 
 
 
-static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(pci200_pci_tbl) = {
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
 	  PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
 	{ 0, }
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index daee8a0624ee..541c700dceef 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -814,7 +814,7 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
 	return 0;
 }
 
-static struct pci_device_id wanxl_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(wanxl_pci_tbl) = {
 	{ PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID,
 	  PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID,
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index e1f04bb437e3..e6ca3eb4c0d3 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -39,7 +39,7 @@ static unsigned int rx_ring_size __read_mostly = 16;
 module_param(tx_ring_size, uint, 0);
 module_param(rx_ring_size, uint, 0);
 
-static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(adm8211_pci_id_table) = {
 	/* ADMtek ADM8211 */
 	{ PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */
 	{ PCI_DEVICE(0x1200, 0x8201) }, /* ? */
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4331d675fcc6..37e4ab737f2a 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -57,7 +57,7 @@
 #define DRV_NAME "airo"
 
 #ifdef CONFIG_PCI
-static struct pci_device_id card_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(card_ids) = {
 	{ 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0x14b9, 0x4500, PCI_ANY_ID, PCI_ANY_ID },
 	{ 0x14b9, 0x4800, PCI_ANY_ID, PCI_ANY_ID, },
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index fdfaf0f618f1..72e5ed51c0af 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -83,7 +83,7 @@ MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
 
 
 /* Known PCI ids */
-static const struct pci_device_id ath5k_pci_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
 	{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
 	{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f7af5ea54753..ee617205cb4a 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -18,7 +18,7 @@
 #include <linux/pci.h>
 #include "ath9k.h"
 
-static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c
index 92f87fbe750f..9ab1192004c0 100644
--- a/drivers/net/wireless/atmel_pci.c
+++ b/drivers/net/wireless/atmel_pci.c
@@ -31,7 +31,7 @@ MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.")
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("Atmel at76c506 PCI wireless cards");
 
-static struct pci_device_id card_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(card_ids) = {
 	{ 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },
 	{ 0, }
 };
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 8fdd41f4b4f2..4d97ae37499b 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -39,7 +39,7 @@ struct hostap_pci_priv {
 /* FIX: do we need mb/wmb/rmb with memory operations? */
 
 
-static struct pci_device_id prism2_pci_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(prism2_pci_id_table) = {
 	/* Intersil Prism3 ISL3872 11Mb/s WLAN Controller */
 	{ 0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
 	/* Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller */
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 0e5d51086a44..fc04ccdc5bef 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -60,7 +60,7 @@ struct hostap_plx_priv {
 
 #define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID }
 
-static struct pci_device_id prism2_plx_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(prism2_plx_id_table) = {
 	PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"),
 	PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"),
 	PLXDEV(0x126c, 0x8030, "Nortel emobility"),
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 56afcf041f81..9b72c45a7748 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -6585,7 +6585,7 @@ static void ipw2100_shutdown(struct pci_dev *pci_dev)
 
 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
 
-static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table) = {
 	IPW2100_DEV_ID(0x2520),	/* IN 2100A mPCI 3A */
 	IPW2100_DEV_ID(0x2521),	/* IN 2100A mPCI 3B */
 	IPW2100_DEV_ID(0x2524),	/* IN 2100A mPCI 3B */
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 09ddd3e6bedc..63c2a7ade5fb 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11524,7 +11524,7 @@ out:
 }
 
 /* PCI driver stuff */
-static struct pci_device_id card_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(card_ids) = {
 	{PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2701, 0, 0, 0},
 	{PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2702, 0, 0, 0},
 	{PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2711, 0, 0, 0},
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 28ffe4c826d8..6cde661ce0bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2849,7 +2849,7 @@ static struct iwl_cfg iwl3945_abg_cfg = {
 	.broken_powersave = true,
 };
 
-struct pci_device_id iwl3945_hw_card_ids[] = {
+DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
 	{IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
 	{IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 3ec2fe370b58..bc532ff4f883 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -37,7 +37,7 @@
 #include <net/ieee80211_radiotap.h>
 
 /* Hardware specific file defines the PCI IDs table for that hardware module */
-extern struct pci_device_id iwl3945_hw_card_ids[];
+extern const struct pci_device_id iwl3945_hw_card_ids[];
 
 #include "iwl-csr.h"
 #include "iwl-prph.h"
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 771b03c1c7c5..c8fec626b714 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3766,7 +3766,7 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
  *****************************************************************************/
 
 /* Hardware specific file defines the PCI IDs table for that hardware module */
-static struct pci_device_id iwl_hw_card_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 #ifdef CONFIG_IWL4965
 	{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
 	{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c
index c13a4c383410..075f446b3139 100644
--- a/drivers/net/wireless/orinoco/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco/orinoco_nortel.c
@@ -274,7 +274,7 @@ static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static struct pci_device_id orinoco_nortel_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(orinoco_nortel_id_table) = {
 	/* Nortel emobility PCI */
 	{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
 	/* Symbol LA-4123 PCI */
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index fea7781948e7..bda5317cc596 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -212,7 +212,7 @@ static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static struct pci_device_id orinoco_pci_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(orinoco_pci_id_table) = {
 	/* Intersil Prism 3 */
 	{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
 	/* Intersil Prism 2.5 */
diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index 3f2942a1e4f5..e0d5874ab42f 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -310,7 +310,7 @@ static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static struct pci_device_id orinoco_plx_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(orinoco_plx_id_table) = {
 	{0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,},	/* Siemens SpeedStream SS1023 */
 	{0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,},	/* Netgear MA301 */
 	{0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,},	/* Correga  - does this work? */
diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index d3452548cc71..88cbc7902aa0 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -203,7 +203,7 @@ static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static struct pci_device_id orinoco_tmd_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(orinoco_tmd_id_table) = {
 	{0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,},      /* NDC and OEMs, e.g. pheecom */
 	{0,},
 };
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index a15962a19b2a..fab41f507bd3 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -31,7 +31,7 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS("prism54pci");
 MODULE_FIRMWARE("isl3886pci");
 
-static struct pci_device_id p54p_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(p54p_table) = {
 	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
 	{ PCI_DEVICE(0x1260, 0x3890) },
 	/* 3COM 3CRWE154G72 Wireless LAN adapter */
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index e4f2bb7368f2..dc14420a9adc 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -39,7 +39,7 @@ module_param(init_pcitm, int, 0);
  * driver_data
  * If you have an update for this please contact prism54-devel@prism54.org
  * The latest list can be found at http://prism54.org/supported_cards.php */
-static const struct pci_device_id prism54_id_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
 	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
 	{
 	 0x1260, 0x3890,
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d86d233c6810..aa579eb8723f 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1642,7 +1642,7 @@ static const struct rt2x00_ops rt2400pci_ops = {
 /*
  * RT2400pci module information.
  */
-static struct pci_device_id rt2400pci_device_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(rt2400pci_device_table) = {
 	{ PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) },
 	{ 0, }
 };
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 46cbc6ef66ab..77ee1df7933f 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1940,7 +1940,7 @@ static const struct rt2x00_ops rt2500pci_ops = {
 /*
  * RT2500pci module information.
  */
-static struct pci_device_id rt2500pci_device_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
 	{ PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
 	{ 0, }
 };
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b93eabb4fbe1..99095e1ee13b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1208,7 +1208,7 @@ static const struct rt2x00_ops rt2800pci_ops = {
 /*
  * RT2800pci module information.
  */
-static struct pci_device_id rt2800pci_device_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
 	{ PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index c353b497a65d..1f97a797bc41 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2807,7 +2807,7 @@ static const struct rt2x00_ops rt61pci_ops = {
 /*
  * RT61pci module information.
  */
-static struct pci_device_id rt61pci_device_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(rt61pci_device_table) = {
 	/* RT2561s */
 	{ PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
 	/* RT2561 v2 */
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 5a2b7199f5d5..b9192bfcc557 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -33,7 +33,7 @@ MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
 MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
 MODULE_LICENSE("GPL");
 
-static struct pci_device_id rtl8180_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(rtl8180_table) = {
 	/* rtl8185 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 0f773a9a3ff2..8b231b30fd12 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -237,7 +237,7 @@ static const struct pci_id_info pci_id_tbl[] = {
 	{ }
 };
 
-static const struct pci_device_id yellowfin_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(yellowfin_pci_tbl) = {
 	{ 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 	{ }
-- 
cgit v1.2.3


From 368c0ca2f0a69b0818fbc1796d8e21ff02a61b4c Mon Sep 17 00:00:00 2001
From: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Date: Fri, 8 Jan 2010 00:07:27 -0800
Subject: be2net: implements ethtool function to read eeprom data.

The patch implements a firmware command to fetch the eeprom data.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_cmds.c    | 30 ++++++++++++++++++++++++++++
 drivers/net/benet/be_cmds.h    | 16 +++++++++++++++
 drivers/net/benet/be_ethtool.c | 45 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 91 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 1b68bd98dc0c..b748c197408f 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1571,3 +1571,33 @@ err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
+
+extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
+				struct be_dma_mem *nonemb_cmd)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_seeprom_read *req;
+	struct be_sge *sge;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = nonemb_cmd->va;
+	sge = nonembedded_sgl(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+			OPCODE_COMMON_SEEPROM_READ);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			OPCODE_COMMON_SEEPROM_READ, sizeof(*req));
+
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd->size);
+
+	status = be_mcc_notify_wait(adapter);
+
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 92b87ef156ed..6eed512bb6d4 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -124,6 +124,7 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_CQ_CREATE				12
 #define OPCODE_COMMON_EQ_CREATE				13
 #define OPCODE_COMMON_MCC_CREATE        		21
+#define OPCODE_COMMON_SEEPROM_READ			30
 #define OPCODE_COMMON_NTWK_RX_FILTER    		34
 #define OPCODE_COMMON_GET_FW_VERSION			35
 #define OPCODE_COMMON_SET_FLOW_CONTROL			36
@@ -840,6 +841,19 @@ struct be_cmd_resp_ddrdma_test {
 	u8  rcv_buff[4096];
 };
 
+/*********************** SEEPROM Read ***********************/
+
+#define BE_READ_SEEPROM_LEN 1024
+struct be_cmd_req_seeprom_read {
+	struct be_cmd_req_hdr hdr;
+	u8 rsvd0[BE_READ_SEEPROM_LEN];
+};
+
+struct be_cmd_resp_seeprom_read {
+	struct be_cmd_req_hdr hdr;
+	u8 seeprom_data[BE_READ_SEEPROM_LEN];
+};
+
 extern int be_pci_fnum_get(struct be_adapter *adapter);
 extern int be_cmd_POST(struct be_adapter *adapter);
 extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 				u32 num_pkts, u64 pattern);
 extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
 			u32 byte_cnt, struct be_dma_mem *cmd);
+extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
+				struct be_dma_mem *nonemb_cmd);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 298b92cbd689..c5afc0286d4d 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -536,12 +536,57 @@ be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
 	return be_load_fw(adapter, file_name);
 }
 
+static int
+be_get_eeprom_len(struct net_device *netdev)
+{
+	return BE_READ_SEEPROM_LEN;
+}
+
+static int
+be_read_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom,
+			uint8_t *data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_dma_mem eeprom_cmd;
+	struct be_cmd_resp_seeprom_read *resp;
+	int status;
+
+	if (!eeprom->len)
+		return -EINVAL;
+
+	eeprom->magic = BE_VENDOR_ID | (adapter->pdev->device<<16);
+
+	memset(&eeprom_cmd, 0, sizeof(struct be_dma_mem));
+	eeprom_cmd.size = sizeof(struct be_cmd_req_seeprom_read);
+	eeprom_cmd.va = pci_alloc_consistent(adapter->pdev, eeprom_cmd.size,
+				&eeprom_cmd.dma);
+
+	if (!eeprom_cmd.va) {
+		dev_err(&adapter->pdev->dev,
+			"Memory allocation failure. Could not read eeprom\n");
+		return -ENOMEM;
+	}
+
+	status = be_cmd_get_seeprom_data(adapter, &eeprom_cmd);
+
+	if (!status) {
+		resp = (struct be_cmd_resp_seeprom_read *) eeprom_cmd.va;
+		memcpy(data, resp->seeprom_data, eeprom->len);
+	}
+	pci_free_consistent(adapter->pdev, eeprom_cmd.size, eeprom_cmd.va,
+			eeprom_cmd.dma);
+
+	return status;
+}
+
 const struct ethtool_ops be_ethtool_ops = {
 	.get_settings = be_get_settings,
 	.get_drvinfo = be_get_drvinfo,
 	.get_wol = be_get_wol,
 	.set_wol = be_set_wol,
 	.get_link = ethtool_op_get_link,
+	.get_eeprom_len = be_get_eeprom_len,
+	.get_eeprom = be_read_eeprom,
 	.get_coalesce = be_get_coalesce,
 	.set_coalesce = be_set_coalesce,
 	.get_ringparam = be_get_ringparam,
-- 
cgit v1.2.3


From e2eb8e38592f28d8be4a518f44d3385272dedddb Mon Sep 17 00:00:00 2001
From: Benjamin Li <benli@broadcom.com>
Date: Fri, 8 Jan 2010 00:51:21 -0800
Subject: bnx2: Flush the register writes which setup the MSI-X table

The MSI-X table size needs to be properly set before pci_enable_msix()
is called.  But on certain machines, the writes are delayed and the
MSI-X table size is incorrectly read.  By reading the
BNX2_PCI_MSIX_CONTROL register, the writes are flushed and now
ensure that the MSI-X table is set correctly before MSI-X
is enable on the device.

This patch was originally diagnosed and authored by
Kalyan Ram Chintalapati <kalyanc@vmware.com>.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Kalyan Ram Chintalapati <kalyanc@vmware.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 65df1de447e4..b1c20e5f7de8 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6145,6 +6145,10 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
 	REG_WR(bp, BNX2_PCI_MSIX_TBL_OFF_BIR, BNX2_PCI_GRC_WINDOW2_BASE);
 	REG_WR(bp, BNX2_PCI_MSIX_PBA_OFF_BIT, BNX2_PCI_GRC_WINDOW3_BASE);
 
+	/*  Need to flush the previous three writes to ensure MSI-X
+	 *  is setup properly */
+	REG_RD(bp, BNX2_PCI_MSIX_CONTROL);
+
 	for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
 		msix_ent[i].entry = i;
 		msix_ent[i].vector = 0;
-- 
cgit v1.2.3


From df2f7ec8c09ce879245c3309d859218188123ef1 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Fri, 8 Jan 2010 00:53:03 -0800
Subject: ep93xx_eth.c general cleanup

General cleanup of the ep93xx_eth driver.

1) Use pr_fmt() to prefix the module name and __func__ to the error
   messages.
2) <linux/io.h> instead of <asm/io.h>
3) <mach/hardware.h> instead of <mach/ep93xx-regs.h> and <mach/platform.h>
4) Move the ep93xx_mdio_read (and ep93xx_mdio_write) function to eliminate
   the function prototype.
5) Change all the printk(<level> messages to pr_<level> and remove the
   __func__ argument.
6) Use platform_get_{resource/irq} to get the platform resources and add
   an error check.
7) Use resource_size() for request_mem_region() and ioremap().
8) Use %pM to print the MAC address at the end of the probe.
9) Use dev->dev_addr not data->dev_addr for the MAC argument because a
   random address could be used if the platform does not supply one.

The message at the end of the probe is left as a printk since it displays
cleaner without the function name that would be displayed with pr_info().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/arm/ep93xx_eth.c | 140 +++++++++++++++++++++----------------------
 1 file changed, 68 insertions(+), 72 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index b25467ac895c..bf72d57a0afd 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -9,6 +9,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
+
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -20,9 +22,9 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <mach/ep93xx-regs.h>
-#include <mach/platform.h>
-#include <asm/io.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
 
 #define DRV_MODULE_NAME		"ep93xx-eth"
 #define DRV_MODULE_VERSION	"0.1"
@@ -185,7 +187,47 @@ struct ep93xx_priv
 #define wrw(ep, off, val)	__raw_writew((val), (ep)->base_addr + (off))
 #define wrl(ep, off, val)	__raw_writel((val), (ep)->base_addr + (off))
 
-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg);
+static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+	struct ep93xx_priv *ep = netdev_priv(dev);
+	int data;
+	int i;
+
+	wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
+
+	for (i = 0; i < 10; i++) {
+		if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+			break;
+		msleep(1);
+	}
+
+	if (i == 10) {
+		pr_info("mdio read timed out\n");
+		data = 0xffff;
+	} else {
+		data = rdl(ep, REG_MIIDATA);
+	}
+
+	return data;
+}
+
+static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
+{
+	struct ep93xx_priv *ep = netdev_priv(dev);
+	int i;
+
+	wrl(ep, REG_MIIDATA, data);
+	wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
+
+	for (i = 0; i < 10; i++) {
+		if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+			break;
+		msleep(1);
+	}
+
+	if (i == 10)
+		pr_info("mdio write timed out\n");
+}
 
 static struct net_device_stats *ep93xx_get_stats(struct net_device *dev)
 {
@@ -217,14 +259,11 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
 		rstat->rstat1 = 0;
 
 		if (!(rstat0 & RSTAT0_EOF))
-			printk(KERN_CRIT "ep93xx_rx: not end-of-frame "
-					 " %.8x %.8x\n", rstat0, rstat1);
+			pr_crit("not end-of-frame %.8x %.8x\n", rstat0, rstat1);
 		if (!(rstat0 & RSTAT0_EOB))
-			printk(KERN_CRIT "ep93xx_rx: not end-of-buffer "
-					 " %.8x %.8x\n", rstat0, rstat1);
+			pr_crit("not end-of-buffer %.8x %.8x\n", rstat0, rstat1);
 		if ((rstat1 & RSTAT1_BUFFER_INDEX) >> 16 != entry)
-			printk(KERN_CRIT "ep93xx_rx: entry mismatch "
-					 " %.8x %.8x\n", rstat0, rstat1);
+			pr_crit("entry mismatch %.8x %.8x\n", rstat0, rstat1);
 
 		if (!(rstat0 & RSTAT0_RWE)) {
 			ep->stats.rx_errors++;
@@ -241,8 +280,7 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
 
 		length = rstat1 & RSTAT1_FRAME_LENGTH;
 		if (length > MAX_PKT_SIZE) {
-			printk(KERN_NOTICE "ep93xx_rx: invalid length "
-					 " %.8x %.8x\n", rstat0, rstat1);
+			pr_notice("invalid length %.8x %.8x\n", rstat0, rstat1);
 			goto err;
 		}
 
@@ -371,11 +409,9 @@ static void ep93xx_tx_complete(struct net_device *dev)
 		tstat->tstat0 = 0;
 
 		if (tstat0 & TSTAT0_FA)
-			printk(KERN_CRIT "ep93xx_tx_complete: frame aborted "
-					 " %.8x\n", tstat0);
+			pr_crit("frame aborted %.8x\n", tstat0);
 		if ((tstat0 & TSTAT0_BUFFER_INDEX) != entry)
-			printk(KERN_CRIT "ep93xx_tx_complete: entry mismatch "
-					 " %.8x\n", tstat0);
+			pr_crit("entry mismatch %.8x\n", tstat0);
 
 		if (tstat0 & TSTAT0_TXWE) {
 			int length = ep->descs->tdesc[entry].tdesc1 & 0xfff;
@@ -536,7 +572,7 @@ static int ep93xx_start_hw(struct net_device *dev)
 	}
 
 	if (i == 10) {
-		printk(KERN_CRIT DRV_MODULE_NAME ": hw failed to reset\n");
+		pr_crit("hw failed to reset\n");
 		return 1;
 	}
 
@@ -581,7 +617,7 @@ static int ep93xx_start_hw(struct net_device *dev)
 	}
 
 	if (i == 10) {
-		printk(KERN_CRIT DRV_MODULE_NAME ": hw failed to start\n");
+		pr_crit("hw failed to start\n");
 		return 1;
 	}
 
@@ -617,7 +653,7 @@ static void ep93xx_stop_hw(struct net_device *dev)
 	}
 
 	if (i == 10)
-		printk(KERN_CRIT DRV_MODULE_NAME ": hw failed to reset\n");
+		pr_crit("hw failed to reset\n");
 }
 
 static int ep93xx_open(struct net_device *dev)
@@ -681,48 +717,6 @@ static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
 }
 
-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
-{
-	struct ep93xx_priv *ep = netdev_priv(dev);
-	int data;
-	int i;
-
-	wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
-
-	for (i = 0; i < 10; i++) {
-		if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
-			break;
-		msleep(1);
-	}
-
-	if (i == 10) {
-		printk(KERN_INFO DRV_MODULE_NAME ": mdio read timed out\n");
-		data = 0xffff;
-	} else {
-		data = rdl(ep, REG_MIIDATA);
-	}
-
-	return data;
-}
-
-static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
-{
-	struct ep93xx_priv *ep = netdev_priv(dev);
-	int i;
-
-	wrl(ep, REG_MIIDATA, data);
-	wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
-
-	for (i = 0; i < 10; i++) {
-		if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
-			break;
-		msleep(1);
-	}
-
-	if (i == 10)
-		printk(KERN_INFO DRV_MODULE_NAME ": mdio write timed out\n");
-}
-
 static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
 	strcpy(info->driver, DRV_MODULE_NAME);
@@ -825,12 +819,19 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 	struct ep93xx_eth_data *data;
 	struct net_device *dev;
 	struct ep93xx_priv *ep;
+	struct resource *mem;
+	int irq;
 	int err;
 
 	if (pdev == NULL)
 		return -ENODEV;
 	data = pdev->dev.platform_data;
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!mem || irq < 0)
+		return -ENXIO;
+
 	dev = ep93xx_dev_alloc(data);
 	if (dev == NULL) {
 		err = -ENOMEM;
@@ -842,23 +843,21 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
-	ep->res = request_mem_region(pdev->resource[0].start,
-			pdev->resource[0].end - pdev->resource[0].start + 1,
-			dev_name(&pdev->dev));
+	ep->res = request_mem_region(mem->start, resource_size(mem),
+				     dev_name(&pdev->dev));
 	if (ep->res == NULL) {
 		dev_err(&pdev->dev, "Could not reserve memory region\n");
 		err = -ENOMEM;
 		goto err_out;
 	}
 
-	ep->base_addr = ioremap(pdev->resource[0].start,
-			pdev->resource[0].end - pdev->resource[0].start);
+	ep->base_addr = ioremap(mem->start, resource_size(mem));
 	if (ep->base_addr == NULL) {
 		dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
 		err = -EIO;
 		goto err_out;
 	}
-	ep->irq = pdev->resource[1].start;
+	ep->irq = irq;
 
 	ep->mii.phy_id = data->phy_id;
 	ep->mii.phy_id_mask = 0x1f;
@@ -877,11 +876,8 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 		goto err_out;
 	}
 
-	printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, "
-			 "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
-			ep->irq, data->dev_addr[0], data->dev_addr[1],
-			data->dev_addr[2], data->dev_addr[3],
-			data->dev_addr[4], data->dev_addr[5]);
+	printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, %pM\n",
+			dev->name, ep->irq, dev->dev_addr);
 
 	return 0;
 
-- 
cgit v1.2.3


From 2d4b6faf7d1818e9a52ae9f068ab4ffd9c3be923 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@denx.de>
Date: Thu, 7 Jan 2010 09:43:06 +0000
Subject: can: mscan: fix improper return if dlc < 8 in start_xmit function

The start_xmit function of the MSCAN Driver did return improperly if
the CAN dlc check failed (skb not freed and invalid return code). This
patch adds a proper check of the frame lenght and data size and returns
now correctly. The invalid skb packets are dropped silently as suggested
by David Miller in the thread "[RFC] ndo_validate_skb: Let the netdev
check a valid skb content" on the netdev mailing list.

Furthermore, a typo has been fixed.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/mscan/mscan.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 07346f880ca6..0dcbe8cfab64 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>,
  *                         Varma Electronics Oy
  * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
- * Copytight (C) 2008-2009 Pengutronix <kernel@pengutronix.de>
+ * Copyright (C) 2008-2009 Pengutronix <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the version 2 of the GNU General Public License
@@ -177,8 +177,11 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int i, rtr, buf_id;
 	u32 can_id;
 
-	if (frame->can_dlc > 8)
-		return -EINVAL;
+	if (skb->len != sizeof(*frame) || frame->can_dlc > 8) {
+		kfree_skb(skb);
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
 
 	out_8(&regs->cantier, 0);
 
-- 
cgit v1.2.3


From bf3af54732bea5894ccc2cbde3ab566f0af7da56 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@denx.de>
Date: Thu, 7 Jan 2010 09:43:07 +0000
Subject: can: mscan-mpc5xxx: add support for the MPC512x processor

The main differences compared to the MSCAN on the MPC5200 are:

- More flexibility in choosing the CAN source clock and frequency:

  Three different clock sources can be selected: "ip", "ref" or "sys".
  For the latter two, a clock divider can be defined as well. If the
  clock source is not specified by the device tree, we first try to
  find an optimal CAN source clock based on the system clock. If that
  is not possible, the reference clock will be used.

- The behavior of bus-off recovery is configurable:

  To comply with the usual handling of Socket-CAN bus-off recovery,
  "recovery on request" is selected (instead of automatic recovery).

Note that only MPC5121 Rev. 2 and later is supported.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/mscan/Kconfig       |   7 +-
 drivers/net/can/mscan/mpc5xxx_can.c | 246 ++++++++++++++++++++++++++++++------
 drivers/net/can/mscan/mscan.c       |  51 ++++++--
 drivers/net/can/mscan/mscan.h       |  86 +++++++------
 4 files changed, 295 insertions(+), 95 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index cd0f2d6f375d..27d1d398e25e 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -11,12 +11,13 @@ if CAN_MSCAN
 
 config CAN_MPC5XXX
 	tristate "Freescale MPC5xxx onboard CAN controller"
-	depends on PPC_MPC52xx
+	depends on (PPC_MPC52xx || PPC_MPC512x)
 	---help---
 	  If you say yes here you get support for Freescale's MPC5xxx
-	  onboard CAN controller.
+	  onboard CAN controller. Currently, the MPC5200, MPC5200B and
+	  MPC5121 (Rev. 2 and later) are supported.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called mscan-mpc5xxx.ko.
 
 endif
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 1de6f6349b16..f73487f723b8 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -29,6 +29,7 @@
 #include <linux/can/dev.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/mpc52xx.h>
 
@@ -36,22 +37,21 @@
 
 #define DRV_NAME "mpc5xxx_can"
 
-static struct of_device_id mpc52xx_cdm_ids[] __devinitdata = {
+struct mpc5xxx_can_data {
+	unsigned int type;
+	u32 (*get_clock)(struct of_device *ofdev, const char *clock_name,
+			 int *mscan_clksrc);
+};
+
+#ifdef CONFIG_PPC_MPC5200
+static struct of_device_id __devinitdata mpc52xx_cdm_ids[] = {
 	{ .compatible = "fsl,mpc5200-cdm", },
 	{}
 };
 
-/*
- * Get frequency of the MSCAN clock source
- *
- * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock (IP_CLK)
- * can be selected. According to the MPC5200 user's manual, the oscillator
- * clock is the better choice as it has less jitter but due to a hardware
- * bug, it can not be selected for the old MPC5200 Rev. A chips.
- */
-
-static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
-						      int clock_src)
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
 {
 	unsigned int pvr;
 	struct mpc52xx_cdm  __iomem *cdm;
@@ -61,11 +61,24 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 
 	pvr = mfspr(SPRN_PVR);
 
-	freq = mpc5xxx_get_bus_frequency(of->node);
+	/*
+	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
+	 * (IP_CLK) can be selected as MSCAN clock source. According to
+	 * the MPC5200 user's manual, the oscillator clock is the better
+	 * choice as it has less jitter. For this reason, it is selected
+	 * by default. Unfortunately, it can not be selected for the old
+	 * MPC5200 Rev. A chips due to a hardware bug (check errata).
+	 */
+	if (clock_name && strcmp(clock_name, "ip") == 0)
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+	else
+		*mscan_clksrc = MSCAN_CLKSRC_XTAL;
+
+	freq = mpc5xxx_get_bus_frequency(ofdev->node);
 	if (!freq)
 		return 0;
 
-	if (clock_src == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
+	if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
 		return freq;
 
 	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
@@ -75,7 +88,6 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 		return 0;
 	}
 	cdm = of_iomap(np_cdm, 0);
-	of_node_put(np_cdm);
 
 	if (in_8(&cdm->ipb_clk_sel) & 0x1)
 		freq *= 2;
@@ -84,26 +96,174 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 	freq *= (val & (1 << 5)) ? 8 : 4;
 	freq /= (val & (1 << 6)) ? 12 : 16;
 
+	of_node_put(np_cdm);
 	iounmap(cdm);
 
 	return freq;
 }
+#else /* !CONFIG_PPC_MPC5200 */
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC5200 */
+
+#ifdef CONFIG_PPC_MPC512x
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[12];		/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+	u32 mccr[4];		/* MSCAN Clk Ctrl Reg 1-3 */
+};
+
+static struct of_device_id __devinitdata mpc512x_clock_ids[] = {
+	{ .compatible = "fsl,mpc5121-clock", },
+	{}
+};
+
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	struct mpc512x_clockctl __iomem *clockctl;
+	struct device_node *np_clock;
+	struct clk *sys_clk, *ref_clk;
+	int plen, clockidx, clocksrc = -1;
+	u32 sys_freq, val, clockdiv = 1, freq = 0;
+	const u32 *pval;
+
+	np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
+	if (!np_clock) {
+		dev_err(&ofdev->dev, "couldn't find clock node\n");
+		return -ENODEV;
+	}
+	clockctl = of_iomap(np_clock, 0);
+	if (!clockctl) {
+		dev_err(&ofdev->dev, "couldn't map clock registers\n");
+		return 0;
+	}
+
+	/* Determine the MSCAN device index from the physical address */
+	pval = of_get_property(ofdev->node, "reg", &plen);
+	BUG_ON(!pval || plen < sizeof(*pval));
+	clockidx = (*pval & 0x80) ? 1 : 0;
+	if (*pval & 0x2000)
+		clockidx += 2;
+
+	/*
+	 * Clock source and divider selection: 3 different clock sources
+	 * can be selected: "ip", "ref" or "sys". For the latter two, a
+	 * clock divider can be defined as well. If the clock source is
+	 * not specified by the device tree, we first try to find an
+	 * optimal CAN source clock based on the system clock. If that
+	 * is not posslible, the reference clock will be used.
+	 */
+	if (clock_name && !strcmp(clock_name, "ip")) {
+		*mscan_clksrc = MSCAN_CLKSRC_IPS;
+		freq = mpc5xxx_get_bus_frequency(ofdev->node);
+	} else {
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+
+		pval = of_get_property(ofdev->node,
+				       "fsl,mscan-clock-divider", &plen);
+		if (pval && plen == sizeof(*pval))
+			clockdiv = *pval;
+		if (!clockdiv)
+			clockdiv = 1;
+
+		if (!clock_name || !strcmp(clock_name, "sys")) {
+			sys_clk = clk_get(&ofdev->dev, "sys_clk");
+			if (!sys_clk) {
+				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
+				goto exit_unmap;
+			}
+			/* Get and round up/down sys clock rate */
+			sys_freq = 1000000 *
+				((clk_get_rate(sys_clk) + 499999) / 1000000);
+
+			if (!clock_name) {
+				/* A multiple of 16 MHz would be optimal */
+				if ((sys_freq % 16000000) == 0) {
+					clocksrc = 0;
+					clockdiv = sys_freq / 16000000;
+					freq = sys_freq / clockdiv;
+				}
+			} else {
+				clocksrc = 0;
+				freq = sys_freq / clockdiv;
+			}
+		}
+
+		if (clocksrc < 0) {
+			ref_clk = clk_get(&ofdev->dev, "ref_clk");
+			if (!ref_clk) {
+				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
+				goto exit_unmap;
+			}
+			clocksrc = 1;
+			freq = clk_get_rate(ref_clk) / clockdiv;
+		}
+	}
+
+	/* Disable clock */
+	out_be32(&clockctl->mccr[clockidx], 0x0);
+	if (clocksrc >= 0) {
+		/* Set source and divider */
+		val = (clocksrc << 14) | ((clockdiv - 1) << 17);
+		out_be32(&clockctl->mccr[clockidx], val);
+		/* Enable clock */
+		out_be32(&clockctl->mccr[clockidx], val | 0x10000);
+	}
+
+	/* Enable MSCAN clock domain */
+	val = in_be32(&clockctl->sccr[1]);
+	if (!(val & (1 << 25)))
+		out_be32(&clockctl->sccr[1], val | (1 << 25));
+
+	dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
+		*mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
+		clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
+
+exit_unmap:
+	of_node_put(np_clock);
+	iounmap(clockctl);
+
+	return freq;
+}
+#else /* !CONFIG_PPC_MPC512x */
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
 
 static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 				       const struct of_device_id *id)
 {
+	struct mpc5xxx_can_data *data = (struct mpc5xxx_can_data *)id->data;
 	struct device_node *np = ofdev->node;
 	struct net_device *dev;
 	struct mscan_priv *priv;
 	void __iomem *base;
-	const char *clk_src;
-	int err, irq, clock_src;
+	const char *clock_name = NULL;
+	int irq, mscan_clksrc = 0;
+	int err = -ENOMEM;
 
-	base = of_iomap(ofdev->node, 0);
+	base = of_iomap(np, 0);
 	if (!base) {
 		dev_err(&ofdev->dev, "couldn't ioremap\n");
-		err = -ENOMEM;
-		goto exit_release_mem;
+		return err;
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
@@ -114,37 +274,27 @@ static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 	}
 
 	dev = alloc_mscandev();
-	if (!dev) {
-		err = -ENOMEM;
+	if (!dev)
 		goto exit_dispose_irq;
-	}
 
 	priv = netdev_priv(dev);
 	priv->reg_base = base;
 	dev->irq = irq;
 
-	/*
-	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
-	 * (IP_CLK) can be selected as MSCAN clock source. According to
-	 * the MPC5200 user's manual, the oscillator clock is the better
-	 * choice as it has less jitter. For this reason, it is selected
-	 * by default.
-	 */
-	clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
-	if (clk_src && strcmp(clk_src, "ip") == 0)
-		clock_src = MSCAN_CLKSRC_BUS;
-	else
-		clock_src = MSCAN_CLKSRC_XTAL;
-	priv->can.clock.freq = mpc52xx_can_clock_freq(ofdev, clock_src);
+	clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);
+
+	BUG_ON(!data);
+	priv->type = data->type;
+	priv->can.clock.freq = data->get_clock(ofdev, clock_name,
+					       &mscan_clksrc);
 	if (!priv->can.clock.freq) {
-		dev_err(&ofdev->dev, "couldn't get MSCAN clock frequency\n");
-		err = -ENODEV;
+		dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
 		goto exit_free_mscan;
 	}
 
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
-	err = register_mscandev(dev, clock_src);
+	err = register_mscandev(dev, mscan_clksrc);
 	if (err) {
 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
@@ -164,7 +314,7 @@ exit_dispose_irq:
 	irq_dispose_mapping(irq);
 exit_unmap_mem:
 	iounmap(base);
-exit_release_mem:
+
 	return err;
 }
 
@@ -225,8 +375,20 @@ static int mpc5xxx_can_resume(struct of_device *ofdev)
 }
 #endif
 
+static struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+	.type = MSCAN_TYPE_MPC5200,
+	.get_clock = mpc52xx_can_get_clock,
+};
+
+static struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+	.type = MSCAN_TYPE_MPC5121,
+	.get_clock = mpc512x_can_get_clock,
+};
+
 static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
-	{.compatible = "fsl,mpc5200-mscan"},
+	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
+	/* Note that only MPC5121 Rev. 2 (and later) is supported */
+	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },
 	{},
 };
 
@@ -255,5 +417,5 @@ static void __exit mpc5xxx_can_exit(void)
 module_exit(mpc5xxx_can_exit);
 
 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
-MODULE_DESCRIPTION("Freescale MPC5200 CAN driver");
+MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 0dcbe8cfab64..500d18918bd5 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -152,6 +152,12 @@ static int mscan_start(struct net_device *dev)
 	priv->shadow_canrier = 0;
 	priv->flags = 0;
 
+	if (priv->type == MSCAN_TYPE_MPC5121) {
+		/* Clear pending bus-off condition */
+		if (in_8(&regs->canmisc) & MSCAN_BOHOLD)
+			out_8(&regs->canmisc, MSCAN_BOHOLD);
+	}
+
 	err = mscan_set_mode(dev, MSCAN_NORMAL_MODE);
 	if (err)
 		return err;
@@ -163,8 +169,29 @@ static int mscan_start(struct net_device *dev)
 	out_8(&regs->cantier, 0);
 
 	/* Enable receive interrupts. */
-	out_8(&regs->canrier, MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE |
-	      MSCAN_RSTATE1 | MSCAN_RSTATE0 | MSCAN_TSTATE1 | MSCAN_TSTATE0);
+	out_8(&regs->canrier, MSCAN_RX_INTS_ENABLE);
+
+	return 0;
+}
+
+static int mscan_restart(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+
+	if (priv->type == MSCAN_TYPE_MPC5121) {
+		struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		WARN(!(in_8(&regs->canmisc) & MSCAN_BOHOLD),
+		     "bus-off state expected");
+		out_8(&regs->canmisc, MSCAN_BOHOLD);
+		/* Re-enable receive interrupts. */
+		out_8(&regs->canrier, MSCAN_RX_INTS_ENABLE);
+	} else {
+		if (priv->can.state <= CAN_STATE_BUS_OFF)
+			mscan_set_mode(dev, MSCAN_INIT_MODE);
+		return mscan_start(dev);
+	}
 
 	return 0;
 }
@@ -362,9 +389,12 @@ static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
 			 * automatically. To avoid that we stop the chip doing
 			 * a light-weight stop (we are in irq-context).
 			 */
-			out_8(&regs->cantier, 0);
-			out_8(&regs->canrier, 0);
-			setbits8(&regs->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ);
+			if (priv->type != MSCAN_TYPE_MPC5121) {
+				out_8(&regs->cantier, 0);
+				out_8(&regs->canrier, 0);
+				setbits8(&regs->canctl0,
+					 MSCAN_SLPRQ | MSCAN_INITRQ);
+			}
 			can_bus_off(dev);
 			break;
 		default:
@@ -494,9 +524,7 @@ static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
 
 	switch (mode) {
 	case CAN_MODE_START:
-		if (priv->can.state <= CAN_STATE_BUS_OFF)
-			mscan_set_mode(dev, MSCAN_INIT_MODE);
-		ret = mscan_start(dev);
+		ret = mscan_restart(dev);
 		if (ret)
 			break;
 		if (netif_queue_stopped(dev))
@@ -595,18 +623,21 @@ static const struct net_device_ops mscan_netdev_ops = {
        .ndo_start_xmit         = mscan_start_xmit,
 };
 
-int register_mscandev(struct net_device *dev, int clock_src)
+int register_mscandev(struct net_device *dev, int mscan_clksrc)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
 	u8 ctl1;
 
 	ctl1 = in_8(&regs->canctl1);
-	if (clock_src)
+	if (mscan_clksrc)
 		ctl1 |= MSCAN_CLKSRC;
 	else
 		ctl1 &= ~MSCAN_CLKSRC;
 
+	if (priv->type == MSCAN_TYPE_MPC5121)
+		ctl1 |= MSCAN_BORM; /* bus-off recovery upon request */
+
 	ctl1 |= MSCAN_CANE;
 	out_8(&regs->canctl1, ctl1);
 	udelay(100);
diff --git a/drivers/net/can/mscan/mscan.h b/drivers/net/can/mscan/mscan.h
index 00fc4aaf1ed8..4ff966473bc9 100644
--- a/drivers/net/can/mscan/mscan.h
+++ b/drivers/net/can/mscan/mscan.h
@@ -38,18 +38,20 @@
 #define MSCAN_CLKSRC		0x40
 #define MSCAN_LOOPB		0x20
 #define MSCAN_LISTEN		0x10
+#define MSCAN_BORM		0x08
 #define MSCAN_WUPM		0x04
 #define MSCAN_SLPAK		0x02
 #define MSCAN_INITAK		0x01
 
-/* Use the MPC5200 MSCAN variant? */
+/* Use the MPC5XXX MSCAN variant? */
 #ifdef CONFIG_PPC
-#define MSCAN_FOR_MPC5200
+#define MSCAN_FOR_MPC5XXX
 #endif
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define MSCAN_CLKSRC_BUS	0
 #define MSCAN_CLKSRC_XTAL	MSCAN_CLKSRC
+#define MSCAN_CLKSRC_IPS	MSCAN_CLKSRC
 #else
 #define MSCAN_CLKSRC_BUS	MSCAN_CLKSRC
 #define MSCAN_CLKSRC_XTAL	0
@@ -136,7 +138,7 @@
 #define MSCAN_EFF_RTR_SHIFT	0
 #define MSCAN_EFF_FLAGS		0x18	/* IDE + SRR */
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define _MSCAN_RESERVED_(n, num) u8 _res##n[num]
 #define _MSCAN_RESERVED_DSR_SIZE	2
 #else
@@ -165,67 +167,66 @@ struct mscan_regs {
 	u8 cantbsel;				/* + 0x14     0x0a */
 	u8 canidac;				/* + 0x15     0x0b */
 	u8 reserved;				/* + 0x16     0x0c */
-	_MSCAN_RESERVED_(6, 5);			/* + 0x17          */
-#ifndef MSCAN_FOR_MPC5200
-	u8 canmisc;				/*            0x0d */
-#endif
+	_MSCAN_RESERVED_(6, 2);			/* + 0x17          */
+	u8 canmisc;				/* + 0x19     0x0d */
+	_MSCAN_RESERVED_(7, 2);			/* + 0x1a          */
 	u8 canrxerr;				/* + 0x1c     0x0e */
 	u8 cantxerr;				/* + 0x1d     0x0f */
-	_MSCAN_RESERVED_(7, 2);			/* + 0x1e          */
+	_MSCAN_RESERVED_(8, 2);			/* + 0x1e          */
 	u16 canidar1_0;				/* + 0x20     0x10 */
-	_MSCAN_RESERVED_(8, 2);			/* + 0x22          */
+	_MSCAN_RESERVED_(9, 2);			/* + 0x22          */
 	u16 canidar3_2;				/* + 0x24     0x12 */
-	_MSCAN_RESERVED_(9, 2);			/* + 0x26          */
+	_MSCAN_RESERVED_(10, 2);		/* + 0x26          */
 	u16 canidmr1_0;				/* + 0x28     0x14 */
-	_MSCAN_RESERVED_(10, 2);		/* + 0x2a          */
+	_MSCAN_RESERVED_(11, 2);		/* + 0x2a          */
 	u16 canidmr3_2;				/* + 0x2c     0x16 */
-	_MSCAN_RESERVED_(11, 2);		/* + 0x2e          */
+	_MSCAN_RESERVED_(12, 2);		/* + 0x2e          */
 	u16 canidar5_4;				/* + 0x30     0x18 */
-	_MSCAN_RESERVED_(12, 2);		/* + 0x32          */
+	_MSCAN_RESERVED_(13, 2);		/* + 0x32          */
 	u16 canidar7_6;				/* + 0x34     0x1a */
-	_MSCAN_RESERVED_(13, 2);		/* + 0x36          */
+	_MSCAN_RESERVED_(14, 2);		/* + 0x36          */
 	u16 canidmr5_4;				/* + 0x38     0x1c */
-	_MSCAN_RESERVED_(14, 2);		/* + 0x3a          */
+	_MSCAN_RESERVED_(15, 2);		/* + 0x3a          */
 	u16 canidmr7_6;				/* + 0x3c     0x1e */
-	_MSCAN_RESERVED_(15, 2);		/* + 0x3e          */
+	_MSCAN_RESERVED_(16, 2);		/* + 0x3e          */
 	struct {
 		u16 idr1_0;			/* + 0x40     0x20 */
-		 _MSCAN_RESERVED_(16, 2);	/* + 0x42          */
+		_MSCAN_RESERVED_(17, 2);	/* + 0x42          */
 		u16 idr3_2;			/* + 0x44     0x22 */
-		 _MSCAN_RESERVED_(17, 2);	/* + 0x46          */
+		_MSCAN_RESERVED_(18, 2);	/* + 0x46          */
 		u16 dsr1_0;			/* + 0x48     0x24 */
-		 _MSCAN_RESERVED_(18, 2);	/* + 0x4a          */
+		_MSCAN_RESERVED_(19, 2);	/* + 0x4a          */
 		u16 dsr3_2;			/* + 0x4c     0x26 */
-		 _MSCAN_RESERVED_(19, 2);	/* + 0x4e          */
+		_MSCAN_RESERVED_(20, 2);	/* + 0x4e          */
 		u16 dsr5_4;			/* + 0x50     0x28 */
-		 _MSCAN_RESERVED_(20, 2);	/* + 0x52          */
+		_MSCAN_RESERVED_(21, 2);	/* + 0x52          */
 		u16 dsr7_6;			/* + 0x54     0x2a */
-		 _MSCAN_RESERVED_(21, 2);	/* + 0x56          */
+		_MSCAN_RESERVED_(22, 2);	/* + 0x56          */
 		u8 dlr;				/* + 0x58     0x2c */
-		 u8:8;				/* + 0x59     0x2d */
-		 _MSCAN_RESERVED_(22, 2);	/* + 0x5a          */
+		u8 reserved;			/* + 0x59     0x2d */
+		_MSCAN_RESERVED_(23, 2);	/* + 0x5a          */
 		u16 time;			/* + 0x5c     0x2e */
 	} rx;
-	 _MSCAN_RESERVED_(23, 2);		/* + 0x5e          */
+	_MSCAN_RESERVED_(24, 2);		/* + 0x5e          */
 	struct {
 		u16 idr1_0;			/* + 0x60     0x30 */
-		 _MSCAN_RESERVED_(24, 2);	/* + 0x62          */
+		_MSCAN_RESERVED_(25, 2);	/* + 0x62          */
 		u16 idr3_2;			/* + 0x64     0x32 */
-		 _MSCAN_RESERVED_(25, 2);	/* + 0x66          */
+		_MSCAN_RESERVED_(26, 2);	/* + 0x66          */
 		u16 dsr1_0;			/* + 0x68     0x34 */
-		 _MSCAN_RESERVED_(26, 2);	/* + 0x6a          */
+		_MSCAN_RESERVED_(27, 2);	/* + 0x6a          */
 		u16 dsr3_2;			/* + 0x6c     0x36 */
-		 _MSCAN_RESERVED_(27, 2);	/* + 0x6e          */
+		_MSCAN_RESERVED_(28, 2);	/* + 0x6e          */
 		u16 dsr5_4;			/* + 0x70     0x38 */
-		 _MSCAN_RESERVED_(28, 2);	/* + 0x72          */
+		_MSCAN_RESERVED_(29, 2);	/* + 0x72          */
 		u16 dsr7_6;			/* + 0x74     0x3a */
-		 _MSCAN_RESERVED_(29, 2);	/* + 0x76          */
+		_MSCAN_RESERVED_(30, 2);	/* + 0x76          */
 		u8 dlr;				/* + 0x78     0x3c */
 		u8 tbpr;			/* + 0x79     0x3d */
-		 _MSCAN_RESERVED_(30, 2);	/* + 0x7a          */
+		_MSCAN_RESERVED_(31, 2);	/* + 0x7a          */
 		u16 time;			/* + 0x7c     0x3e */
 	} tx;
-	 _MSCAN_RESERVED_(31, 2);		/* + 0x7e          */
+	_MSCAN_RESERVED_(32, 2);		/* + 0x7e          */
 } __attribute__ ((packed));
 
 #undef _MSCAN_RESERVED_
@@ -237,6 +238,15 @@ struct mscan_regs {
 #define MSCAN_POWEROFF_MODE	(MSCAN_CSWAI | MSCAN_SLPRQ)
 #define MSCAN_SET_MODE_RETRIES	255
 #define MSCAN_ECHO_SKB_MAX	3
+#define MSCAN_RX_INTS_ENABLE	(MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE | \
+				 MSCAN_RSTATE1 | MSCAN_RSTATE0 | \
+				 MSCAN_TSTATE1 | MSCAN_TSTATE0)
+
+/* MSCAN type variants */
+enum {
+	MSCAN_TYPE_MPC5200,
+	MSCAN_TYPE_MPC5121
+};
 
 #define BTR0_BRP_MASK		0x3f
 #define BTR0_SJW_SHIFT		6
@@ -270,6 +280,7 @@ struct tx_queue_entry {
 
 struct mscan_priv {
 	struct can_priv can;	/* must be the first member */
+	unsigned int type; 	/* MSCAN type variants */
 	long open_time;
 	unsigned long flags;
 	void __iomem *reg_base;	/* ioremap'ed address to registers */
@@ -285,12 +296,7 @@ struct mscan_priv {
 };
 
 extern struct net_device *alloc_mscandev(void);
-/*
- * clock_src:
- *	1 = The MSCAN clock source is the onchip Bus Clock.
- *	0 = The MSCAN clock source is the chip Oscillator Clock.
- */
-extern int register_mscandev(struct net_device *dev, int clock_src);
+extern int register_mscandev(struct net_device *dev, int mscan_clksrc);
 extern void unregister_mscandev(struct net_device *dev);
 
 #endif /* __MSCAN_H__ */
-- 
cgit v1.2.3


From 7f081d405adb5f905db11c6449319ab7c670722e Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Thu, 7 Jan 2010 17:41:00 +0000
Subject: igb: add support for device reset interrupt

This patch adds support for the global device reset interrupt.  Without
this change the drivers will report tx hangs on all ports when a global
device reset occurs.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 484fbc83739f..e959b88be314 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -4110,6 +4110,9 @@ static irqreturn_t igb_msix_other(int irq, void *data)
 	u32 icr = rd32(E1000_ICR);
 	/* reading ICR causes bit 31 of EICR to be cleared */
 
+	if (icr & E1000_ICR_DRSTA)
+		schedule_work(&adapter->reset_task);
+
 	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
@@ -4733,6 +4736,9 @@ static irqreturn_t igb_intr_msi(int irq, void *data)
 
 	igb_write_itr(q_vector);
 
+	if (icr & E1000_ICR_DRSTA)
+		schedule_work(&adapter->reset_task);
+
 	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
@@ -4772,6 +4778,9 @@ static irqreturn_t igb_intr(int irq, void *data)
 	if (!(icr & E1000_ICR_INT_ASSERTED))
 		return IRQ_NONE;
 
+	if (icr & E1000_ICR_DRSTA)
+		schedule_work(&adapter->reset_task);
+
 	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
-- 
cgit v1.2.3


From 51f5300682f5925a11edfddfd47ed47376871974 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sat, 9 Jan 2010 23:00:32 -0800
Subject: mac8390: Fix build breakage

commit 18c0019102228875cb0f6f252dad5148491e96b2 ("drivers/net/mac8390.c:
Convert printk(KERN_<level> to pr_<level>(") broke the build:

| drivers/net/mac8390.c:306: error: expected ')' before 'version'

as "version" is not a string literal, but a variable.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mac8390.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index c70bd6888c89..a8768672dc5a 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -303,7 +303,7 @@ static bool __init mac8390_init(struct net_device *dev, struct nubus_dev *ndev,
 	int offset;
 	volatile unsigned short *i;
 
-	printk_once(KERN_INFO pr_fmt(version));
+	printk_once(KERN_INFO pr_fmt("%s"), version);
 
 	dev->irq = SLOT2IRQ(ndev->board->slot);
 	/* This is getting to be a habit */
-- 
cgit v1.2.3


From 50d9c84ee522ce6f61cd6a7dfce1b82a260edd3c Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:23:11 +0000
Subject: ixgbevf: Macros, data structures, useful defines and registers

These two headers define the commonly used macros, data structures,
register bits and register offsets used by the ixgbevf driver on the
82599 virtual function device

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/defines.h | 292 ++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbevf/regs.h    |  85 ++++++++++++
 2 files changed, 377 insertions(+)
 create mode 100644 drivers/net/ixgbevf/defines.h
 create mode 100644 drivers/net/ixgbevf/regs.h

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/defines.h b/drivers/net/ixgbevf/defines.h
new file mode 100644
index 000000000000..c44fdb05447a
--- /dev/null
+++ b/drivers/net/ixgbevf/defines.h
@@ -0,0 +1,292 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBEVF_DEFINES_H_
+#define _IXGBEVF_DEFINES_H_
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82599_VF           0x10ED
+
+#define IXGBE_VF_IRQ_CLEAR_MASK         7
+#define IXGBE_VF_MAX_TX_QUEUES          1
+#define IXGBE_VF_MAX_RX_QUEUES          1
+#define IXGBE_ETH_LENGTH_OF_ADDRESS     6
+
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_1GB_FULL       0x0020
+#define IXGBE_LINK_SPEED_10GB_FULL      0x0080
+
+#define IXGBE_CTRL_RST          0x04000000 /* Reset (SW) */
+#define IXGBE_RXDCTL_ENABLE     0x02000000 /* Enable specific Rx Queue */
+#define IXGBE_TXDCTL_ENABLE     0x02000000 /* Enable specific Tx Queue */
+#define IXGBE_LINKS_UP          0x40000000
+#define IXGBE_LINKS_SPEED       0x20000000
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE  8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY   1024
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_ALLOC_VAL    0x80 /* Interrupt Allocation valid */
+
+#define IXGBE_VF_INIT_TIMEOUT   200 /* Number of retries to clear RSTI */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN       0x00000001  /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS     0x00000002  /* Descriptor Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE     0x02000000  /* Enable specific Rx Queue */
+#define IXGBE_RXDCTL_VME        0x40000000  /* VLAN mode enable */
+
+/* DCA Control */
+#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR    0x00000010
+#define IXGBE_PSRTYPE_UDPHDR    0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR   0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR   0x00000200
+#define IXGBE_PSRTYPE_L2HDR     0x00001000
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT     10     /* so many KBs */
+#define IXGBE_SRRCTL_RDMTS_SHIFT        22
+#define IXGBE_SRRCTL_RDMTS_MASK         0x01C00000
+#define IXGBE_SRRCTL_DROP_EN            0x10000000
+#define IXGBE_SRRCTL_BSIZEPKT_MASK      0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK      0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY    0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT  0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK      0x0E000000
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD         0x01    /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP        0x02    /* End of Packet */
+#define IXGBE_RXD_STAT_FLM        0x04    /* FDir Match */
+#define IXGBE_RXD_STAT_VP         0x08    /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK   0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT  0x00000004
+#define IXGBE_RXD_STAT_UDPCS      0x10    /* UDP xsum calculated */
+#define IXGBE_RXD_STAT_L4CS       0x20    /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS       0x40    /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF        0x80    /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV       0x100   /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_VEXT       0x200   /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV       0x400   /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT     0x800   /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_TS         0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP       0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB         0x40000 /* Loopback Status */
+#define IXGBE_RXD_STAT_ACK        0x8000  /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE          0x01    /* CRC Error */
+#define IXGBE_RXD_ERR_LE          0x02    /* Length Error */
+#define IXGBE_RXD_ERR_PE          0x08    /* Packet Error */
+#define IXGBE_RXD_ERR_OSE         0x10    /* Oversize Error */
+#define IXGBE_RXD_ERR_USE         0x20    /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE        0x40    /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE         0x80    /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK     0xFFF00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT    20         /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_HBO      0x00800000 /*Header Buffer Overflow */
+#define IXGBE_RXDADV_ERR_CE       0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE       0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE       0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE      0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE      0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE     0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE      0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK    0x0FFF  /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK        0xE000  /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT       13
+#define IXGBE_RXD_CFI_MASK        0x1000  /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT       12
+
+#define IXGBE_RXDADV_STAT_DD            IXGBE_RXD_STAT_DD  /* Done */
+#define IXGBE_RXDADV_STAT_EOP           IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM           IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP            IXGBE_RXD_STAT_VP  /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK          0x000FFFFF /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS        0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT        0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP  0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP    0x00000030 /* 11: Ctxt w/ DDP */
+
+#define IXGBE_RXDADV_RSSTYPE_MASK       0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK       0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX    0x0001FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK     0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK        0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT       17
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT    5
+#define IXGBE_RXDADV_SPLITHEADER_EN     0x00001000
+#define IXGBE_RXDADV_SPH                0x8000
+
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+				      IXGBE_RXD_ERR_CE |  \
+				      IXGBE_RXD_ERR_LE |  \
+				      IXGBE_RXD_ERR_PE |  \
+				      IXGBE_RXD_ERR_OSE | \
+				      IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+					 IXGBE_RXDADV_ERR_CE |  \
+					 IXGBE_RXDADV_ERR_LE |  \
+					 IXGBE_RXDADV_ERR_PE |  \
+					 IXGBE_RXDADV_ERR_OSE | \
+					 IXGBE_RXDADV_ERR_USE)
+
+#define IXGBE_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP    0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC     0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS     0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD    0x00000001 /* Descriptor Done */
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+	struct {
+		__le64 buffer_addr;      /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd;       /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+	struct {
+		__le64 pkt_addr; /* Packet buffer address */
+		__le64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			union {
+				__le32 data;
+				struct {
+					__le16 pkt_info; /* RSS, Pkt type */
+					__le16 hdr_info; /* Splithdr, hdrlen */
+				} hs_rss;
+			} lo_dword;
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id; /* IP id */
+					__le16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error; /* ext status/error */
+			__le16 length; /* Packet length */
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTYP_MASK  0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT  0x00200000 /* Advanced Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA  0x00300000 /* Advanced Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP   IXGBE_TXD_CMD_EOP  /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS  IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RS    IXGBE_TXD_CMD_RS   /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DEXT  IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
+#define IXGBE_ADVTXD_DCMD_VLE   IXGBE_TXD_CMD_VLE  /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE   0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD    IXGBE_TXD_STAT_DD  /* Descriptor Done */
+#define IXGBE_ADVTXD_TUCMD_IPV4      0x00000400  /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6      0x00000000  /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP   0x00000000  /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP   0x00000800  /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP  0x00001000  /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_IDX_SHIFT  4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_POPTS_SHIFT      8  /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
+				 IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
+				 IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_PAYLEN_SHIFT    14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT      16  /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT       16  /* Adv ctxt MSS shift */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE    0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_MAILBOX      0x00080000 /* VF to PF Mailbox Interrupt */
+#define IXGBE_EICR_OTHER        0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EICS_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EIMS_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EIMC_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+				IXGBE_EIMS_RTX_QUEUE       | \
+				IXGBE_EIMS_MAILBOX         | \
+				IXGBE_EIMS_OTHER)
+
+#define IXGBE_EITR_CNT_WDIS     0x80000000
+
+/* Error Codes */
+#define IXGBE_ERR_INVALID_MAC_ADDR              -1
+#define IXGBE_ERR_RESET_FAILED                  -2
+
+#endif /* _IXGBEVF_DEFINES_H_ */
diff --git a/drivers/net/ixgbevf/regs.h b/drivers/net/ixgbevf/regs.h
new file mode 100644
index 000000000000..12f75960aec1
--- /dev/null
+++ b/drivers/net/ixgbevf/regs.h
@@ -0,0 +1,85 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBEVF_REGS_H_
+#define _IXGBEVF_REGS_H_
+
+#define IXGBE_VFCTRL           0x00000
+#define IXGBE_VFSTATUS         0x00008
+#define IXGBE_VFLINKS          0x00010
+#define IXGBE_VFRTIMER         0x00048
+#define IXGBE_VFRXMEMWRAP      0x03190
+#define IXGBE_VTEICR           0x00100
+#define IXGBE_VTEICS           0x00104
+#define IXGBE_VTEIMS           0x00108
+#define IXGBE_VTEIMC           0x0010C
+#define IXGBE_VTEIAC           0x00110
+#define IXGBE_VTEIAM           0x00114
+#define IXGBE_VTEITR(x)        (0x00820 + (4 * x))
+#define IXGBE_VTIVAR(x)        (0x00120 + (4 * x))
+#define IXGBE_VTIVAR_MISC      0x00140
+#define IXGBE_VTRSCINT(x)      (0x00180 + (4 * x))
+#define IXGBE_VFRDBAL(x)       (0x01000 + (0x40 * x))
+#define IXGBE_VFRDBAH(x)       (0x01004 + (0x40 * x))
+#define IXGBE_VFRDLEN(x)       (0x01008 + (0x40 * x))
+#define IXGBE_VFRDH(x)         (0x01010 + (0x40 * x))
+#define IXGBE_VFRDT(x)         (0x01018 + (0x40 * x))
+#define IXGBE_VFRXDCTL(x)      (0x01028 + (0x40 * x))
+#define IXGBE_VFSRRCTL(x)      (0x01014 + (0x40 * x))
+#define IXGBE_VFRSCCTL(x)      (0x0102C + (0x40 * x))
+#define IXGBE_VFPSRTYPE        0x00300
+#define IXGBE_VFTDBAL(x)       (0x02000 + (0x40 * x))
+#define IXGBE_VFTDBAH(x)       (0x02004 + (0x40 * x))
+#define IXGBE_VFTDLEN(x)       (0x02008 + (0x40 * x))
+#define IXGBE_VFTDH(x)         (0x02010 + (0x40 * x))
+#define IXGBE_VFTDT(x)         (0x02018 + (0x40 * x))
+#define IXGBE_VFTXDCTL(x)      (0x02028 + (0x40 * x))
+#define IXGBE_VFTDWBAL(x)      (0x02038 + (0x40 * x))
+#define IXGBE_VFTDWBAH(x)      (0x0203C + (0x40 * x))
+#define IXGBE_VFDCA_RXCTRL(x)  (0x0100C + (0x40 * x))
+#define IXGBE_VFDCA_TXCTRL(x)  (0x0200c + (0x40 * x))
+#define IXGBE_VFGPRC           0x0101C
+#define IXGBE_VFGPTC           0x0201C
+#define IXGBE_VFGORC_LSB       0x01020
+#define IXGBE_VFGORC_MSB       0x01024
+#define IXGBE_VFGOTC_LSB       0x02020
+#define IXGBE_VFGOTC_MSB       0x02024
+#define IXGBE_VFMPRC           0x01034
+
+#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+
+#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
+
+#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+    writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
+
+#define IXGBE_READ_REG_ARRAY(a, reg, offset) ( \
+    readl((a)->hw_addr + (reg) + ((offset) << 2)))
+
+#define IXGBE_WRITE_FLUSH(a) (IXGBE_READ_REG(a, IXGBE_VFSTATUS))
+
+#endif /* _IXGBEVF_REGS_H_ */
-- 
cgit v1.2.3


From 3047f90bd515b38e62094eff90b299f379ab7243 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:23:31 +0000
Subject: ixgbevf: 82599 Virtual Function core functions and header

This module and header file contain the core functions for the 82599
virtual function device.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/vf.c | 387 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbevf/vf.h | 168 ++++++++++++++++++++
 2 files changed, 555 insertions(+)
 create mode 100644 drivers/net/ixgbevf/vf.c
 create mode 100644 drivers/net/ixgbevf/vf.h

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ixgbevf/vf.c
new file mode 100644
index 000000000000..4b5dec0ec140
--- /dev/null
+++ b/drivers/net/ixgbevf/vf.c
@@ -0,0 +1,387 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "vf.h"
+
+/**
+ *  ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type, clears
+ *  all on chip counters, initializes receive address registers, multicast
+ *  table, VLAN filter table, calls routine to set up link and flow control
+ *  settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
+{
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = false;
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_init_hw_vf - virtual function hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting the hardware and then starting
+ *  the hardware
+ **/
+static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
+{
+	s32 status = hw->mac.ops.start_hw(hw);
+
+	hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+	return status;
+}
+
+/**
+ *  ixgbevf_reset_hw_vf - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by reseting the transmit and receive units, masks and
+ *  clears all interrupts.
+ **/
+static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+	s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+	u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+	u8 *addr = (u8 *)(&msgbuf[1]);
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	hw->mac.ops.stop_adapter(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* we cannot reset while the RSTI / RSTD bits are asserted */
+	while (!mbx->ops.check_for_rst(hw) && timeout) {
+		timeout--;
+		udelay(5);
+	}
+
+	if (!timeout)
+		return IXGBE_ERR_RESET_FAILED;
+
+	/* mailbox timeout can now become active */
+	mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+	msgbuf[0] = IXGBE_VF_RESET;
+	mbx->ops.write_posted(hw, msgbuf, 1);
+
+	msleep(10);
+
+	/* set our "perm_addr" based on info provided by PF */
+	/* also set up the mc_filter_type which is piggy backed
+	 * on the mac address in word 3 */
+	ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
+	if (ret_val)
+		return ret_val;
+
+	if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
+		return IXGBE_ERR_INVALID_MAC_ADDR;
+
+	memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+	hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
+{
+	u32 number_of_queues;
+	u32 reg_val;
+	u16 i;
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = true;
+
+	/* Disable the receive unit by stopped each queue */
+	number_of_queues = hw->mac.max_rx_queues;
+	for (i = 0; i < number_of_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
+		if (reg_val & IXGBE_RXDCTL_ENABLE) {
+			reg_val &= ~IXGBE_RXDCTL_ENABLE;
+			IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+		}
+	}
+
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Clear interrupt mask to stop from interrupts being generated */
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+	/* Clear any pending interrupts */
+	IXGBE_READ_REG(hw, IXGBE_VTEICR);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	number_of_queues = hw->mac.max_tx_queues;
+	for (i = 0; i < number_of_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
+		if (reg_val & IXGBE_TXDCTL_ENABLE) {
+			reg_val &= ~IXGBE_TXDCTL_ENABLE;
+			IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
+ *  to mc_filter_type.
+ **/
+static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:   /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:   /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:   /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:   /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:  /* Invalid mc_filter_type */
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+/**
+ *  ixgbevf_get_mac_addr_vf - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *  @mac_addr: pointer to storage for retrieved MAC address
+ **/
+static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	memcpy(mac_addr, hw->mac.perm_addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_set_rar_vf - set device MAC address
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: Unused in this implementation
+ **/
+static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
+			      u32 vmdq)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[3];
+	u8 *msg_addr = (u8 *)(&msgbuf[1]);
+	s32 ret_val;
+
+	memset(msgbuf, 0, sizeof(msgbuf));
+	msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+	memcpy(msg_addr, addr, 6);
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+	/* if nacked the address was rejected, use "perm_addr" */
+	if (!ret_val &&
+	    (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+		ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *  @next: caller supplied function to return next address in list
+ *
+ *  Updates the Multicast Table Array.
+ **/
+static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+					u32 mc_addr_count,
+					ixgbe_mc_addr_itr next)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+	u16 *vector_list = (u16 *)&msgbuf[1];
+	u32 vector;
+	u32 cnt, i;
+	u32 vmdq;
+
+	/* Each entry in the list uses 1 16 bit word.  We have 30
+	 * 16 bit words available in our HW msg buffer (minus 1 for the
+	 * msg type).  That's 30 hash values if we pack 'em right.  If
+	 * there are more than 30 MC addresses to add then punt the
+	 * extras for now and then add code to handle more than 30 later.
+	 * It would be unusual for a server to request that many multi-cast
+	 * addresses except for in large enterprise network environments.
+	 */
+
+	cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+	msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+	msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+	for (i = 0; i < cnt; i++) {
+		vector = ixgbevf_mta_vector(hw, next(hw, &mc_addr_list, &vmdq));
+		vector_list[i] = vector;
+	}
+
+	mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
+ *  @hw: pointer to the HW structure
+ *  @vlan: 12 bit VLAN ID
+ *  @vind: unused by VF drivers
+ *  @vlan_on: if true then set bit, else clear bit
+ **/
+static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			       bool vlan_on)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[2];
+
+	msgbuf[0] = IXGBE_VF_SET_VLAN;
+	msgbuf[1] = vlan;
+	/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+	msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+	return mbx->ops.write_posted(hw, msgbuf, 2);
+}
+
+/**
+ *  ixgbevf_setup_mac_link_vf - Setup MAC link settings
+ *  @hw: pointer to hardware structure
+ *  @speed: Unused in this implementation
+ *  @autoneg: Unused in this implementation
+ *  @autoneg_wait_to_complete: Unused in this implementation
+ *
+ *  Do nothing and return success.  VF drivers are not allowed to change
+ *  global settings.  Maintained for driver compatibility.
+ **/
+static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed, bool autoneg,
+				     bool autoneg_wait_to_complete)
+{
+	return 0;
+}
+
+/**
+ *  ixgbevf_check_mac_link_vf - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true is link is up, false otherwise
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
+				     ixgbe_link_speed *speed,
+				     bool *link_up,
+				     bool autoneg_wait_to_complete)
+{
+	u32 links_reg;
+
+	if (!(hw->mbx.ops.check_for_rst(hw))) {
+		*link_up = false;
+		*speed = 0;
+		return -1;
+	}
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+	if (links_reg & IXGBE_LINKS_UP)
+		*link_up = true;
+	else
+		*link_up = false;
+
+	if (links_reg & IXGBE_LINKS_SPEED)
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	else
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+	return 0;
+}
+
+struct ixgbe_mac_operations ixgbevf_mac_ops = {
+	.init_hw             = ixgbevf_init_hw_vf,
+	.reset_hw            = ixgbevf_reset_hw_vf,
+	.start_hw            = ixgbevf_start_hw_vf,
+	.get_mac_addr        = ixgbevf_get_mac_addr_vf,
+	.stop_adapter        = ixgbevf_stop_hw_vf,
+	.setup_link          = ixgbevf_setup_mac_link_vf,
+	.check_link          = ixgbevf_check_mac_link_vf,
+	.set_rar             = ixgbevf_set_rar_vf,
+	.update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
+	.set_vfta            = ixgbevf_set_vfta_vf,
+};
+
+struct ixgbevf_info ixgbevf_vf_info = {
+	.mac = ixgbe_mac_82599_vf,
+	.mac_ops = &ixgbevf_mac_ops,
+};
+
diff --git a/drivers/net/ixgbevf/vf.h b/drivers/net/ixgbevf/vf.h
new file mode 100644
index 000000000000..799600e92700
--- /dev/null
+++ b/drivers/net/ixgbevf/vf.h
@@ -0,0 +1,168 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef __IXGBE_VF_H__
+#define __IXGBE_VF_H__
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+
+#include "defines.h"
+#include "regs.h"
+#include "mbx.h"
+
+struct ixgbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+				  u32 *vmdq);
+struct ixgbe_mac_operations {
+	s32 (*init_hw)(struct ixgbe_hw *);
+	s32 (*reset_hw)(struct ixgbe_hw *);
+	s32 (*start_hw)(struct ixgbe_hw *);
+	s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
+	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+	u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*stop_adapter)(struct ixgbe_hw *);
+	s32 (*get_bus_info)(struct ixgbe_hw *);
+
+	/* Link */
+	s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
+	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+	s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+				     bool *);
+
+	/* RAR, Multicast, VLAN */
+	s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32);
+	s32 (*init_rx_addrs)(struct ixgbe_hw *);
+	s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+				   ixgbe_mc_addr_itr);
+	s32 (*enable_mc)(struct ixgbe_hw *);
+	s32 (*disable_mc)(struct ixgbe_hw *);
+	s32 (*clear_vfta)(struct ixgbe_hw *);
+	s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+};
+
+enum ixgbe_mac_type {
+	ixgbe_mac_unknown = 0,
+	ixgbe_mac_82599_vf,
+	ixgbe_num_macs
+};
+
+struct ixgbe_mac_info {
+	struct ixgbe_mac_operations ops;
+	u8 addr[6];
+	u8 perm_addr[6];
+
+	enum ixgbe_mac_type type;
+
+	s32  mc_filter_type;
+
+	bool get_link_status;
+	u32  max_tx_queues;
+	u32  max_rx_queues;
+	u32  max_msix_vectors;
+};
+
+struct ixgbe_mbx_operations {
+	s32 (*init_params)(struct ixgbe_hw *hw);
+	s32 (*read)(struct ixgbe_hw *, u32 *, u16);
+	s32 (*write)(struct ixgbe_hw *, u32 *, u16);
+	s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16);
+	s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16);
+	s32 (*check_for_msg)(struct ixgbe_hw *);
+	s32 (*check_for_ack)(struct ixgbe_hw *);
+	s32 (*check_for_rst)(struct ixgbe_hw *);
+};
+
+struct ixgbe_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+	struct ixgbe_mbx_operations ops;
+	struct ixgbe_mbx_stats stats;
+	u32 timeout;
+	u32 udelay;
+	u32 v2p_mailbox;
+	u16 size;
+};
+
+struct ixgbe_hw {
+	void *back;
+
+	u8 __iomem *hw_addr;
+	u8 *flash_address;
+	unsigned long io_base;
+
+	struct ixgbe_mac_info mac;
+	struct ixgbe_mbx_info mbx;
+
+	u16 device_id;
+	u16 subsystem_vendor_id;
+	u16 subsystem_device_id;
+	u16 vendor_id;
+
+	u8  revision_id;
+	bool adapter_stopped;
+};
+
+struct ixgbevf_hw_stats {
+	u64 base_vfgprc;
+	u64 base_vfgptc;
+	u64 base_vfgorc;
+	u64 base_vfgotc;
+	u64 base_vfmprc;
+
+	u64 last_vfgprc;
+	u64 last_vfgptc;
+	u64 last_vfgorc;
+	u64 last_vfgotc;
+	u64 last_vfmprc;
+
+	u64 vfgprc;
+	u64 vfgptc;
+	u64 vfgorc;
+	u64 vfgotc;
+	u64 vfmprc;
+};
+
+struct ixgbevf_info {
+	enum ixgbe_mac_type		mac;
+	struct ixgbe_mac_operations	*mac_ops;
+};
+
+#endif /* __IXGBE_VF_H__ */
+
-- 
cgit v1.2.3


From cbf698dbba25741ee1b2e734a6dd4f3070a1706f Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:23:50 +0000
Subject: ixgbevf: Mailbox communication

The 82599 virtual function device and the master 82599 physical function
device implement a mailbox utility for communication between the devices
using some SRAM scratch memory and a doorbell/answering mechanism enabled
via interrupt and/or polling.  This C module and accompanying header
file implement the base functions for use of this feature.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/mbx.c | 341 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbevf/mbx.h | 100 ++++++++++++++
 2 files changed, 441 insertions(+)
 create mode 100644 drivers/net/ixgbevf/mbx.c
 create mode 100644 drivers/net/ixgbevf/mbx.h

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ixgbevf/mbx.c
new file mode 100644
index 000000000000..b8143501e6fc
--- /dev/null
+++ b/drivers/net/ixgbevf/mbx.c
@@ -0,0 +1,341 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "mbx.h"
+
+/**
+ *  ixgbevf_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *
+ *  returns 0 if it successfully received a message notification
+ **/
+static s32 ixgbevf_poll_for_msg(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	while (countdown && mbx->ops.check_for_msg(hw)) {
+		countdown--;
+		udelay(mbx->udelay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+
+	return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbevf_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *
+ *  returns 0 if it successfully received a message acknowledgement
+ **/
+static s32 ixgbevf_poll_for_ack(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	while (countdown && mbx->ops.check_for_ack(hw)) {
+		countdown--;
+		udelay(mbx->udelay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+
+	return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbevf_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns 0 if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+static s32 ixgbevf_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	ret_val = ixgbevf_poll_for_msg(hw);
+
+	/* if ack received read message, otherwise we timed out */
+	if (!ret_val)
+		ret_val = mbx->ops.read(hw, msg, size);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns 0 if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+static s32 ixgbevf_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val;
+
+	/* send msg */
+	ret_val = mbx->ops.write(hw, msg, size);
+
+	/* if msg sent wait until we receive an ack */
+	if (!ret_val)
+		ret_val = ixgbevf_poll_for_ack(hw);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_read_v2p_mailbox - read v2p mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  This function is used to read the v2p mailbox without losing the read to
+ *  clear status bits.
+ **/
+static u32 ixgbevf_read_v2p_mailbox(struct ixgbe_hw *hw)
+{
+	u32 v2p_mailbox = IXGBE_READ_REG(hw, IXGBE_VFMAILBOX);
+
+	v2p_mailbox |= hw->mbx.v2p_mailbox;
+	hw->mbx.v2p_mailbox |= v2p_mailbox & IXGBE_VFMAILBOX_R2C_BITS;
+
+	return v2p_mailbox;
+}
+
+/**
+ *  ixgbevf_check_for_bit_vf - Determine if a status bit was set
+ *  @hw: pointer to the HW structure
+ *  @mask: bitmask for bits to be tested and cleared
+ *
+ *  This function is used to check for the read to clear bits within
+ *  the V2P mailbox.
+ **/
+static s32 ixgbevf_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 v2p_mailbox = ixgbevf_read_v2p_mailbox(hw);
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (v2p_mailbox & mask)
+		ret_val = 0;
+
+	hw->mbx.v2p_mailbox &= ~mask;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_check_for_msg_vf - checks to see if the PF has sent mail
+ *  @hw: pointer to the HW structure
+ *
+ *  returns 0 if the PF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbevf_check_for_msg_vf(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (!ixgbevf_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFSTS)) {
+		ret_val = 0;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_check_for_ack_vf - checks to see if the PF has ACK'd
+ *  @hw: pointer to the HW structure
+ *
+ *  returns 0 if the PF has set the ACK bit or else ERR_MBX
+ **/
+static s32 ixgbevf_check_for_ack_vf(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (!ixgbevf_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFACK)) {
+		ret_val = 0;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_check_for_rst_vf - checks to see if the PF has reset
+ *  @hw: pointer to the HW structure
+ *
+ *  returns true if the PF has set the reset done bit or else false
+ **/
+static s32 ixgbevf_check_for_rst_vf(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (!ixgbevf_check_for_bit_vf(hw, (IXGBE_VFMAILBOX_RSTD |
+					 IXGBE_VFMAILBOX_RSTI))) {
+		ret_val = 0;
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_obtain_mbx_lock_vf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *
+ *  return 0 if we obtained the mailbox lock
+ **/
+static s32 ixgbevf_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	/* Take ownership of the buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_VFU);
+
+	/* reserve mailbox for vf use */
+	if (ixgbevf_read_v2p_mailbox(hw) & IXGBE_VFMAILBOX_VFU)
+		ret_val = 0;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_write_mbx_vf - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns 0 if it successfully copied message into the buffer
+ **/
+static s32 ixgbevf_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+	s32 ret_val;
+	u16 i;
+
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbevf_obtain_mbx_lock_vf(hw);
+	if (ret_val)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ixgbevf_check_for_msg_vf(hw);
+	ixgbevf_check_for_ack_vf(hw);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, msg[i]);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+	/* Drop VFU and interrupt the PF to tell it a message has been sent */
+	IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_REQ);
+
+out_no_write:
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_read_mbx_vf - Reads a message from the inbox intended for vf
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns 0 if it successfuly read message from buffer
+ **/
+static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+	s32 ret_val = 0;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbevf_obtain_mbx_lock_vf(hw);
+	if (ret_val)
+		goto out_no_read;
+
+	/* copy the message from the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_VFMBMEM, i);
+
+	/* Acknowledge receipt and release mailbox, then we're done */
+	IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_init_mbx_params_vf - set initial values for vf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+s32 ixgbevf_init_mbx_params_vf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	/* start mailbox as timed out and let the reset_hw call set the timeout
+	 * value to begin communications */
+	mbx->timeout = 0;
+	mbx->udelay = IXGBE_VF_MBX_INIT_DELAY;
+
+	mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+
+	return 0;
+}
+
+struct ixgbe_mbx_operations ixgbevf_mbx_ops = {
+	.init_params   = ixgbevf_init_mbx_params_vf,
+	.read          = ixgbevf_read_mbx_vf,
+	.write         = ixgbevf_write_mbx_vf,
+	.read_posted   = ixgbevf_read_posted_mbx,
+	.write_posted  = ixgbevf_write_posted_mbx,
+	.check_for_msg = ixgbevf_check_for_msg_vf,
+	.check_for_ack = ixgbevf_check_for_ack_vf,
+	.check_for_rst = ixgbevf_check_for_rst_vf,
+};
+
diff --git a/drivers/net/ixgbevf/mbx.h b/drivers/net/ixgbevf/mbx.h
new file mode 100644
index 000000000000..1b0e0bf4c0f5
--- /dev/null
+++ b/drivers/net/ixgbevf/mbx.h
@@ -0,0 +1,100 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "vf.h"
+
+#define IXGBE_VFMAILBOX_SIZE        16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX               -100
+
+#define IXGBE_VFMAILBOX             0x002FC
+#define IXGBE_VFMBMEM               0x00200
+
+/* Define mailbox register bits */
+#define IXGBE_VFMAILBOX_REQ      0x00000001 /* Request for PF Ready bit */
+#define IXGBE_VFMAILBOX_ACK      0x00000002 /* Ack PF message received */
+#define IXGBE_VFMAILBOX_VFU      0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFU      0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFSTS    0x00000010 /* PF wrote a message in the MB */
+#define IXGBE_VFMAILBOX_PFACK    0x00000020 /* PF ack the previous VF msg */
+#define IXGBE_VFMAILBOX_RSTI     0x00000040 /* PF has reset indication */
+#define IXGBE_VFMAILBOX_RSTD     0x00000080 /* PF has indicated reset done */
+#define IXGBE_VFMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
+
+#define IXGBE_PFMAILBOX(x)          (0x04B00 + (4 * x))
+#define IXGBE_PFMBMEM(vfn)          (0x13000 + (64 * vfn))
+
+#define IXGBE_PFMAILBOX_STS   0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK   0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU   0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU   0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU  0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1  0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1  0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK      0x80000000  /* Messages below or'd with
+					       * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK     0x40000000  /* Messages below or'd with
+					       * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS      0x20000000  /* Indicates that VF is still
+					       *  clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT    16
+/* bits 23:16 are used for exra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK     (0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+#define IXGBE_VF_RESET            0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR     0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
+#define IXGBE_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN 4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD     3
+
+#define IXGBE_PF_CONTROL_MSG      0x0100 /* PF control message */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY   500  /* microseconds between retries */
+
+/* forward declaration of the HW struct */
+struct ixgbe_hw;
+
+s32 ixgbevf_init_mbx_params_vf(struct ixgbe_hw *);
+
+#endif /* _IXGBE_MBX_H_ */
-- 
cgit v1.2.3


From 92915f71201b43762fbe05dbfb1a1a0de9c8adb9 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:24:10 +0000
Subject: ixgbevf: Driver main and ethool interface module and main header

These modules and header contain the Linux OS network interface code and core
interrupt and network send/receive handlers.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/ethtool.c      |  716 ++++++++
 drivers/net/ixgbevf/ixgbevf.h      |  318 ++++
 drivers/net/ixgbevf/ixgbevf_main.c | 3571 ++++++++++++++++++++++++++++++++++++
 3 files changed, 4605 insertions(+)
 create mode 100644 drivers/net/ixgbevf/ethtool.c
 create mode 100644 drivers/net/ixgbevf/ixgbevf.h
 create mode 100644 drivers/net/ixgbevf/ixgbevf_main.c

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ixgbevf/ethtool.c
new file mode 100644
index 000000000000..399be0c34c36
--- /dev/null
+++ b/drivers/net/ixgbevf/ethtool.c
@@ -0,0 +1,716 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for ixgbevf */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/vmalloc.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+
+#include "ixgbevf.h"
+
+#define IXGBE_ALL_RAR_ENTRIES 16
+
+#ifdef ETHTOOL_GSTATS
+struct ixgbe_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+	int base_stat_offset;
+};
+
+#define IXGBEVF_STAT(m, b)  sizeof(((struct ixgbevf_adapter *)0)->m), \
+			    offsetof(struct ixgbevf_adapter, m),      \
+			    offsetof(struct ixgbevf_adapter, b)
+static struct ixgbe_stats ixgbe_gstrings_stats[] = {
+	{"rx_packets", IXGBEVF_STAT(stats.vfgprc, stats.base_vfgprc)},
+	{"tx_packets", IXGBEVF_STAT(stats.vfgptc, stats.base_vfgptc)},
+	{"rx_bytes", IXGBEVF_STAT(stats.vfgorc, stats.base_vfgorc)},
+	{"tx_bytes", IXGBEVF_STAT(stats.vfgotc, stats.base_vfgotc)},
+	{"tx_busy", IXGBEVF_STAT(tx_busy, zero_base)},
+	{"multicast", IXGBEVF_STAT(stats.vfmprc, stats.base_vfmprc)},
+	{"rx_csum_offload_good", IXGBEVF_STAT(hw_csum_rx_good, zero_base)},
+	{"rx_csum_offload_errors", IXGBEVF_STAT(hw_csum_rx_error, zero_base)},
+	{"tx_csum_offload_ctxt", IXGBEVF_STAT(hw_csum_tx_good, zero_base)},
+	{"rx_header_split", IXGBEVF_STAT(rx_hdr_split, zero_base)},
+};
+
+#define IXGBE_QUEUE_STATS_LEN 0
+#define IXGBE_GLOBAL_STATS_LEN	ARRAY_SIZE(ixgbe_gstrings_stats)
+
+#define IXGBEVF_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + IXGBE_QUEUE_STATS_LEN)
+#endif /* ETHTOOL_GSTATS */
+#ifdef ETHTOOL_TEST
+static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)",
+	"Link test   (on/offline)"
+};
+#define IXGBE_TEST_LEN (sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN)
+#endif /* ETHTOOL_TEST */
+
+static int ixgbevf_get_settings(struct net_device *netdev,
+				struct ethtool_cmd *ecmd)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 link_speed = 0;
+	bool link_up;
+
+	ecmd->supported = SUPPORTED_10000baseT_Full;
+	ecmd->autoneg = AUTONEG_DISABLE;
+	ecmd->transceiver = XCVR_DUMMY1;
+	ecmd->port = -1;
+
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+
+	if (link_up) {
+		ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+			       SPEED_10000 : SPEED_1000;
+		ecmd->duplex = DUPLEX_FULL;
+	} else {
+		ecmd->speed = -1;
+		ecmd->duplex = -1;
+	}
+
+	return 0;
+}
+
+static u32 ixgbevf_get_rx_csum(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	return adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED;
+}
+
+static int ixgbevf_set_rx_csum(struct net_device *netdev, u32 data)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	if (data)
+		adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+	else
+		adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
+
+	if (netif_running(netdev)) {
+		if (!adapter->dev_closed)
+			ixgbevf_reinit_locked(adapter);
+	} else {
+		ixgbevf_reset(adapter);
+	}
+
+	return 0;
+}
+
+static int ixgbevf_set_tso(struct net_device *netdev, u32 data)
+{
+	if (data) {
+		netdev->features |= NETIF_F_TSO;
+		netdev->features |= NETIF_F_TSO6;
+	} else {
+		netif_tx_stop_all_queues(netdev);
+		netdev->features &= ~NETIF_F_TSO;
+		netdev->features &= ~NETIF_F_TSO6;
+		netif_tx_start_all_queues(netdev);
+	}
+	return 0;
+}
+
+static u32 ixgbevf_get_msglevel(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	return adapter->msg_enable;
+}
+
+static void ixgbevf_set_msglevel(struct net_device *netdev, u32 data)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	adapter->msg_enable = data;
+}
+
+#define IXGBE_GET_STAT(_A_, _R_) (_A_->stats._R_)
+
+static char *ixgbevf_reg_names[] = {
+	"IXGBE_VFCTRL",
+	"IXGBE_VFSTATUS",
+	"IXGBE_VFLINKS",
+	"IXGBE_VFRXMEMWRAP",
+	"IXGBE_VFRTIMER",
+	"IXGBE_VTEICR",
+	"IXGBE_VTEICS",
+	"IXGBE_VTEIMS",
+	"IXGBE_VTEIMC",
+	"IXGBE_VTEIAC",
+	"IXGBE_VTEIAM",
+	"IXGBE_VTEITR",
+	"IXGBE_VTIVAR",
+	"IXGBE_VTIVAR_MISC",
+	"IXGBE_VFRDBAL0",
+	"IXGBE_VFRDBAL1",
+	"IXGBE_VFRDBAH0",
+	"IXGBE_VFRDBAH1",
+	"IXGBE_VFRDLEN0",
+	"IXGBE_VFRDLEN1",
+	"IXGBE_VFRDH0",
+	"IXGBE_VFRDH1",
+	"IXGBE_VFRDT0",
+	"IXGBE_VFRDT1",
+	"IXGBE_VFRXDCTL0",
+	"IXGBE_VFRXDCTL1",
+	"IXGBE_VFSRRCTL0",
+	"IXGBE_VFSRRCTL1",
+	"IXGBE_VFPSRTYPE",
+	"IXGBE_VFTDBAL0",
+	"IXGBE_VFTDBAL1",
+	"IXGBE_VFTDBAH0",
+	"IXGBE_VFTDBAH1",
+	"IXGBE_VFTDLEN0",
+	"IXGBE_VFTDLEN1",
+	"IXGBE_VFTDH0",
+	"IXGBE_VFTDH1",
+	"IXGBE_VFTDT0",
+	"IXGBE_VFTDT1",
+	"IXGBE_VFTXDCTL0",
+	"IXGBE_VFTXDCTL1",
+	"IXGBE_VFTDWBAL0",
+	"IXGBE_VFTDWBAL1",
+	"IXGBE_VFTDWBAH0",
+	"IXGBE_VFTDWBAH1"
+};
+
+
+static int ixgbevf_get_regs_len(struct net_device *netdev)
+{
+	return (ARRAY_SIZE(ixgbevf_reg_names)) * sizeof(u32);
+}
+
+static void ixgbevf_get_regs(struct net_device *netdev,
+			     struct ethtool_regs *regs,
+			     void *p)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u32 regs_len = ixgbevf_get_regs_len(netdev);
+	u8 i;
+
+	memset(p, 0, regs_len);
+
+	regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id;
+
+	/* General Registers */
+	regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_VFCTRL);
+	regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_VFSTATUS);
+	regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+	regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_VFRXMEMWRAP);
+	regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_VFRTIMER);
+
+	/* Interrupt */
+	/* don't read EICR because it can clear interrupt causes, instead
+	 * read EICS which is a shadow but doesn't clear EICR */
+	regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_VTEICS);
+	regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_VTEICS);
+	regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
+	regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_VTEIMC);
+	regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_VTEIAC);
+	regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_VTEIAM);
+	regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_VTEITR(0));
+	regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_VTIVAR(0));
+	regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
+
+	/* Receive DMA */
+	for (i = 0; i < 2; i++)
+		regs_buff[14 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDBAL(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[16 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDBAH(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[18 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDLEN(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[20 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDH(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[22 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDT(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[24 + i] = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[26 + i] = IXGBE_READ_REG(hw, IXGBE_VFSRRCTL(i));
+
+	/* Receive */
+	regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_VFPSRTYPE);
+
+	/* Transmit */
+	for (i = 0; i < 2; i++)
+		regs_buff[29 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDBAL(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[31 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDBAH(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[33 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDLEN(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDH(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[37 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDT(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[39 + i] = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[41 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDWBAL(i));
+	for (i = 0; i < 2; i++)
+		regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDWBAH(i));
+
+	for (i = 0; i < ARRAY_SIZE(ixgbevf_reg_names); i++)
+		hw_dbg(hw, "%s\t%8.8x\n", ixgbevf_reg_names[i], regs_buff[i]);
+}
+
+static void ixgbevf_get_drvinfo(struct net_device *netdev,
+				struct ethtool_drvinfo *drvinfo)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	strlcpy(drvinfo->driver, ixgbevf_driver_name, 32);
+	strlcpy(drvinfo->version, ixgbevf_driver_version, 32);
+
+	strlcpy(drvinfo->fw_version, "N/A", 4);
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+}
+
+static void ixgbevf_get_ringparam(struct net_device *netdev,
+				  struct ethtool_ringparam *ring)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbevf_ring *tx_ring = adapter->tx_ring;
+	struct ixgbevf_ring *rx_ring = adapter->rx_ring;
+
+	ring->rx_max_pending = IXGBEVF_MAX_RXD;
+	ring->tx_max_pending = IXGBEVF_MAX_TXD;
+	ring->rx_mini_max_pending = 0;
+	ring->rx_jumbo_max_pending = 0;
+	ring->rx_pending = rx_ring->count;
+	ring->tx_pending = tx_ring->count;
+	ring->rx_mini_pending = 0;
+	ring->rx_jumbo_pending = 0;
+}
+
+static int ixgbevf_set_ringparam(struct net_device *netdev,
+				 struct ethtool_ringparam *ring)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbevf_ring *tx_ring = NULL, *rx_ring = NULL;
+	int i, err;
+	u32 new_rx_count, new_tx_count;
+	bool need_tx_update = false;
+	bool need_rx_update = false;
+
+	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+		return -EINVAL;
+
+	new_rx_count = max(ring->rx_pending, (u32)IXGBEVF_MIN_RXD);
+	new_rx_count = min(new_rx_count, (u32)IXGBEVF_MAX_RXD);
+	new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+	new_tx_count = max(ring->tx_pending, (u32)IXGBEVF_MIN_TXD);
+	new_tx_count = min(new_tx_count, (u32)IXGBEVF_MAX_TXD);
+	new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+	if ((new_tx_count == adapter->tx_ring->count) &&
+	    (new_rx_count == adapter->rx_ring->count)) {
+		/* nothing to do */
+		return 0;
+	}
+
+	while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
+		msleep(1);
+
+	if (new_tx_count != adapter->tx_ring_count) {
+		tx_ring = kcalloc(adapter->num_tx_queues,
+				  sizeof(struct ixgbevf_ring), GFP_KERNEL);
+		if (!tx_ring) {
+			err = -ENOMEM;
+			goto err_setup;
+		}
+		memcpy(tx_ring, adapter->tx_ring,
+		       adapter->num_tx_queues * sizeof(struct ixgbevf_ring));
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			tx_ring[i].count = new_tx_count;
+			err = ixgbevf_setup_tx_resources(adapter,
+							 &tx_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					ixgbevf_free_tx_resources(adapter,
+								  &tx_ring[i]);
+				}
+				kfree(tx_ring);
+				goto err_setup;
+			}
+			tx_ring[i].v_idx = adapter->tx_ring[i].v_idx;
+		}
+		need_tx_update = true;
+	}
+
+	if (new_rx_count != adapter->rx_ring_count) {
+		rx_ring = kcalloc(adapter->num_rx_queues,
+				  sizeof(struct ixgbevf_ring), GFP_KERNEL);
+		if ((!rx_ring) && (need_tx_update)) {
+			err = -ENOMEM;
+			goto err_rx_setup;
+		}
+		memcpy(rx_ring, adapter->rx_ring,
+		       adapter->num_rx_queues * sizeof(struct ixgbevf_ring));
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			rx_ring[i].count = new_rx_count;
+			err = ixgbevf_setup_rx_resources(adapter,
+							 &rx_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					ixgbevf_free_rx_resources(adapter,
+								  &rx_ring[i]);
+				}
+				kfree(rx_ring);
+				goto err_rx_setup;
+			}
+			rx_ring[i].v_idx = adapter->rx_ring[i].v_idx;
+		}
+		need_rx_update = true;
+	}
+
+err_rx_setup:
+	/* if rings need to be updated, here's the place to do it in one shot */
+	if (need_tx_update || need_rx_update) {
+		if (netif_running(netdev))
+			ixgbevf_down(adapter);
+	}
+
+	/* tx */
+	if (need_tx_update) {
+		kfree(adapter->tx_ring);
+		adapter->tx_ring = tx_ring;
+		tx_ring = NULL;
+		adapter->tx_ring_count = new_tx_count;
+	}
+
+	/* rx */
+	if (need_rx_update) {
+		kfree(adapter->rx_ring);
+		adapter->rx_ring = rx_ring;
+		rx_ring = NULL;
+		adapter->rx_ring_count = new_rx_count;
+	}
+
+	/* success! */
+	err = 0;
+	if (netif_running(netdev))
+		ixgbevf_up(adapter);
+
+err_setup:
+	clear_bit(__IXGBEVF_RESETTING, &adapter->state);
+	return err;
+}
+
+static int ixgbevf_get_sset_count(struct net_device *dev, int stringset)
+{
+       switch (stringset) {
+       case ETH_SS_TEST:
+	       return IXGBE_TEST_LEN;
+       case ETH_SS_STATS:
+	       return IXGBE_GLOBAL_STATS_LEN;
+       default:
+	       return -EINVAL;
+       }
+}
+
+static void ixgbevf_get_ethtool_stats(struct net_device *netdev,
+				      struct ethtool_stats *stats, u64 *data)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	int i;
+
+	ixgbevf_update_stats(adapter);
+	for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+		char *p = (char *)adapter +
+			ixgbe_gstrings_stats[i].stat_offset;
+		char *b = (char *)adapter +
+			ixgbe_gstrings_stats[i].base_stat_offset;
+		data[i] = ((ixgbe_gstrings_stats[i].sizeof_stat ==
+			    sizeof(u64)) ? *(u64 *)p : *(u32 *)p) -
+			  ((ixgbe_gstrings_stats[i].sizeof_stat ==
+			    sizeof(u64)) ? *(u64 *)b : *(u32 *)b);
+	}
+}
+
+static void ixgbevf_get_strings(struct net_device *netdev, u32 stringset,
+				u8 *data)
+{
+	char *p = (char *)data;
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, *ixgbe_gstrings_test,
+		       IXGBE_TEST_LEN * ETH_GSTRING_LEN);
+		break;
+	case ETH_SS_STATS:
+		for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+			memcpy(p, ixgbe_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		break;
+	}
+}
+
+static int ixgbevf_link_test(struct ixgbevf_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	bool link_up;
+	u32 link_speed = 0;
+	*data = 0;
+
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
+	if (!link_up)
+		*data = 1;
+
+	return *data;
+}
+
+/* ethtool register test data */
+struct ixgbevf_reg_test {
+	u16 reg;
+	u8  array_len;
+	u8  test_type;
+	u32 mask;
+	u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables.  We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST	1
+#define SET_READ_TEST	2
+#define WRITE_NO_TEST	3
+#define TABLE32_TEST	4
+#define TABLE64_TEST_LO	5
+#define TABLE64_TEST_HI	6
+
+/* default VF register test */
+static struct ixgbevf_reg_test reg_test_vf[] = {
+	{ IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+	{ IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_VFRXDCTL(0), 2, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	{ IXGBE_VFRDT(0), 2, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_VFRXDCTL(0), 2, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_VFTDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_VFTDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VFTDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
+	{ 0, 0, 0, 0 }
+};
+
+#define REG_PATTERN_TEST(R, M, W)                                             \
+{                                                                             \
+	u32 pat, val, before;                                                 \
+	const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
+	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {                       \
+		before = readl(adapter->hw.hw_addr + R);                      \
+		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
+		val = readl(adapter->hw.hw_addr + R);                         \
+		if (val != (_test[pat] & W & M)) {                            \
+			hw_dbg(&adapter->hw,                                  \
+			"pattern test reg %04X failed: got "                  \
+			"0x%08X expected 0x%08X\n",                           \
+			R, val, (_test[pat] & W & M));                        \
+			*data = R;                                            \
+			writel(before, adapter->hw.hw_addr + R);              \
+			return 1;                                             \
+		}                                                             \
+		writel(before, adapter->hw.hw_addr + R);                      \
+	}                                                                     \
+}
+
+#define REG_SET_AND_CHECK(R, M, W)                                            \
+{                                                                             \
+	u32 val, before;                                                      \
+	before = readl(adapter->hw.hw_addr + R);                              \
+	writel((W & M), (adapter->hw.hw_addr + R));                           \
+	val = readl(adapter->hw.hw_addr + R);                                 \
+	if ((W & M) != (val & M)) {                                           \
+		printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
+				 "expected 0x%08X\n", R, (val & M), (W & M)); \
+		*data = R;                                                    \
+		writel(before, (adapter->hw.hw_addr + R));                    \
+		return 1;                                                     \
+	}                                                                     \
+	writel(before, (adapter->hw.hw_addr + R));                            \
+}
+
+static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
+{
+	struct ixgbevf_reg_test *test;
+	u32 i;
+
+	test = reg_test_vf;
+
+	/*
+	 * Perform the register test, looping through the test table
+	 * until we either fail or reach the null entry.
+	 */
+	while (test->reg) {
+		for (i = 0; i < test->array_len; i++) {
+			switch (test->test_type) {
+			case PATTERN_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 0x40),
+						test->mask,
+						test->write);
+				break;
+			case SET_READ_TEST:
+				REG_SET_AND_CHECK(test->reg + (i * 0x40),
+						test->mask,
+						test->write);
+				break;
+			case WRITE_NO_TEST:
+				writel(test->write,
+				       (adapter->hw.hw_addr + test->reg)
+				       + (i * 0x40));
+				break;
+			case TABLE32_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 4),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_LO:
+				REG_PATTERN_TEST(test->reg + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_HI:
+				REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			}
+		}
+		test++;
+	}
+
+	*data = 0;
+	return *data;
+}
+
+static void ixgbevf_diag_test(struct net_device *netdev,
+			      struct ethtool_test *eth_test, u64 *data)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	bool if_running = netif_running(netdev);
+
+	set_bit(__IXGBEVF_TESTING, &adapter->state);
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		/* Offline tests */
+
+		hw_dbg(&adapter->hw, "offline testing starting\n");
+
+		/* Link test performed before hardware reset so autoneg doesn't
+		 * interfere with test result */
+		if (ixgbevf_link_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			ixgbevf_reset(adapter);
+
+		hw_dbg(&adapter->hw, "register testing starting\n");
+		if (ixgbevf_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbevf_reset(adapter);
+
+		clear_bit(__IXGBEVF_TESTING, &adapter->state);
+		if (if_running)
+			dev_open(netdev);
+	} else {
+		hw_dbg(&adapter->hw, "online testing starting\n");
+		/* Online tests */
+		if (ixgbevf_link_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* Online tests aren't run; pass by default */
+		data[0] = 0;
+
+		clear_bit(__IXGBEVF_TESTING, &adapter->state);
+	}
+	msleep_interruptible(4 * 1000);
+}
+
+static int ixgbevf_nway_reset(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	if (netif_running(netdev)) {
+		if (!adapter->dev_closed)
+			ixgbevf_reinit_locked(adapter);
+	}
+
+	return 0;
+}
+
+static struct ethtool_ops ixgbevf_ethtool_ops = {
+	.get_settings           = ixgbevf_get_settings,
+	.get_drvinfo            = ixgbevf_get_drvinfo,
+	.get_regs_len           = ixgbevf_get_regs_len,
+	.get_regs               = ixgbevf_get_regs,
+	.nway_reset             = ixgbevf_nway_reset,
+	.get_link               = ethtool_op_get_link,
+	.get_ringparam          = ixgbevf_get_ringparam,
+	.set_ringparam          = ixgbevf_set_ringparam,
+	.get_rx_csum            = ixgbevf_get_rx_csum,
+	.set_rx_csum            = ixgbevf_set_rx_csum,
+	.get_tx_csum            = ethtool_op_get_tx_csum,
+	.set_tx_csum            = ethtool_op_set_tx_ipv6_csum,
+	.get_sg                 = ethtool_op_get_sg,
+	.set_sg                 = ethtool_op_set_sg,
+	.get_msglevel           = ixgbevf_get_msglevel,
+	.set_msglevel           = ixgbevf_set_msglevel,
+	.get_tso                = ethtool_op_get_tso,
+	.set_tso                = ixgbevf_set_tso,
+	.self_test              = ixgbevf_diag_test,
+	.get_sset_count         = ixgbevf_get_sset_count,
+	.get_strings            = ixgbevf_get_strings,
+	.get_ethtool_stats      = ixgbevf_get_ethtool_stats,
+};
+
+void ixgbevf_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &ixgbevf_ethtool_ops);
+}
diff --git a/drivers/net/ixgbevf/ixgbevf.h b/drivers/net/ixgbevf/ixgbevf.h
new file mode 100644
index 000000000000..f7015efbff05
--- /dev/null
+++ b/drivers/net/ixgbevf/ixgbevf.h
@@ -0,0 +1,318 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBEVF_H_
+#define _IXGBEVF_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+
+#include "vf.h"
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ixgbevf_tx_buffer {
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	unsigned long time_stamp;
+	u16 length;
+	u16 next_to_watch;
+	u16 mapped_as_page;
+};
+
+struct ixgbevf_rx_buffer {
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	struct page *page;
+	dma_addr_t page_dma;
+	unsigned int page_offset;
+};
+
+struct ixgbevf_ring {
+	struct ixgbevf_adapter *adapter;  /* backlink */
+	void *desc;			/* descriptor ring memory */
+	dma_addr_t dma;			/* phys. address of descriptor ring */
+	unsigned int size;		/* length in bytes */
+	unsigned int count;		/* amount of descriptors */
+	unsigned int next_to_use;
+	unsigned int next_to_clean;
+
+	int queue_index; /* needed for multiqueue queue management */
+	union {
+		struct ixgbevf_tx_buffer *tx_buffer_info;
+		struct ixgbevf_rx_buffer *rx_buffer_info;
+	};
+
+	u16 head;
+	u16 tail;
+
+	unsigned int total_bytes;
+	unsigned int total_packets;
+
+	u16 reg_idx; /* holds the special value that gets the hardware register
+		      * offset associated with this ring, which is different
+		      * for DCB and RSS modes */
+
+#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
+	/* cpu for tx queue */
+	int cpu;
+#endif
+
+	u64 v_idx; /* maps directly to the index for this ring in the hardware
+		    * vector array, can also be used for finding the bit in EICR
+		    * and friends that represents the vector for this ring */
+
+	u16 work_limit;                /* max work per interrupt */
+	u16 rx_buf_len;
+};
+
+enum ixgbevf_ring_f_enum {
+	RING_F_NONE = 0,
+	RING_F_ARRAY_SIZE      /* must be last in enum set */
+};
+
+struct ixgbevf_ring_feature {
+	int indices;
+	int mask;
+};
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IXGBEVF_RX_BUFFER_WRITE	16	/* Must be power of 2 */
+
+#define MAX_RX_QUEUES 1
+#define MAX_TX_QUEUES 1
+
+#define IXGBEVF_DEFAULT_TXD   1024
+#define IXGBEVF_DEFAULT_RXD   512
+#define IXGBEVF_MAX_TXD       4096
+#define IXGBEVF_MIN_TXD       64
+#define IXGBEVF_MAX_RXD       4096
+#define IXGBEVF_MIN_RXD       64
+
+/* Supported Rx Buffer Sizes */
+#define IXGBEVF_RXBUFFER_64    64     /* Used for packet split */
+#define IXGBEVF_RXBUFFER_128   128    /* Used for packet split */
+#define IXGBEVF_RXBUFFER_256   256    /* Used for packet split */
+#define IXGBEVF_RXBUFFER_2048  2048
+#define IXGBEVF_MAX_RXBUFFER   16384  /* largest size for single descriptor */
+
+#define IXGBEVF_RX_HDR_SIZE IXGBEVF_RXBUFFER_256
+
+#define MAXIMUM_ETHERNET_VLAN_SIZE (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
+
+#define IXGBE_TX_FLAGS_CSUM		(u32)(1)
+#define IXGBE_TX_FLAGS_VLAN		(u32)(1 << 1)
+#define IXGBE_TX_FLAGS_TSO		(u32)(1 << 2)
+#define IXGBE_TX_FLAGS_IPV4		(u32)(1 << 3)
+#define IXGBE_TX_FLAGS_FCOE		(u32)(1 << 4)
+#define IXGBE_TX_FLAGS_FSO		(u32)(1 << 5)
+#define IXGBE_TX_FLAGS_VLAN_MASK	0xffff0000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK	0x0000e000
+#define IXGBE_TX_FLAGS_VLAN_SHIFT	16
+
+/* MAX_MSIX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct ixgbevf_q_vector {
+	struct ixgbevf_adapter *adapter;
+	struct napi_struct napi;
+	DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
+	DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
+	u8 rxr_count;     /* Rx ring count assigned to this vector */
+	u8 txr_count;     /* Tx ring count assigned to this vector */
+	u8 tx_itr;
+	u8 rx_itr;
+	u32 eitr;
+	int v_idx;	  /* vector index in list */
+};
+
+/* Helper macros to switch between ints/sec and what the register uses.
+ * And yes, it's the same math going both ways.  The lowest value
+ * supported by all of the ixgbe hardware is 8.
+ */
+#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
+	((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
+#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
+
+#define IXGBE_DESC_UNUSED(R) \
+	((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+	(R)->next_to_clean - (R)->next_to_use - 1)
+
+#define IXGBE_RX_DESC_ADV(R, i)	    \
+	(&(((union ixgbe_adv_rx_desc *)((R).desc))[i]))
+#define IXGBE_TX_DESC_ADV(R, i)	    \
+	(&(((union ixgbe_adv_tx_desc *)((R).desc))[i]))
+#define IXGBE_TX_CTXTDESC_ADV(R, i)	    \
+	(&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i]))
+
+#define IXGBE_MAX_JUMBO_FRAME_SIZE        16128
+
+#define OTHER_VECTOR 1
+#define NON_Q_VECTORS (OTHER_VECTOR)
+
+#define MAX_MSIX_Q_VECTORS 2
+#define MAX_MSIX_COUNT 2
+
+#define MIN_MSIX_Q_VECTORS 2
+#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
+/* board specific private data structure */
+struct ixgbevf_adapter {
+	struct timer_list watchdog_timer;
+#ifdef NETIF_F_HW_VLAN_TX
+	struct vlan_group *vlgrp;
+#endif
+	u16 bd_number;
+	struct work_struct reset_task;
+	struct ixgbevf_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
+	char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
+
+	/* Interrupt Throttle Rate */
+	u32 itr_setting;
+	u16 eitr_low;
+	u16 eitr_high;
+
+	/* TX */
+	struct ixgbevf_ring *tx_ring;	/* One per active queue */
+	int num_tx_queues;
+	u64 restart_queue;
+	u64 hw_csum_tx_good;
+	u64 lsc_int;
+	u64 hw_tso_ctxt;
+	u64 hw_tso6_ctxt;
+	u32 tx_timeout_count;
+	bool detect_tx_hung;
+
+	/* RX */
+	struct ixgbevf_ring *rx_ring;	/* One per active queue */
+	int num_rx_queues;
+	int num_rx_pools;               /* == num_rx_queues in 82598 */
+	int num_rx_queues_per_pool;	/* 1 if 82598, can be many if 82599 */
+	u64 hw_csum_rx_error;
+	u64 hw_rx_no_dma_resources;
+	u64 hw_csum_rx_good;
+	u64 non_eop_descs;
+	int num_msix_vectors;
+	int max_msix_q_vectors;         /* true count of q_vectors for device */
+	struct ixgbevf_ring_feature ring_feature[RING_F_ARRAY_SIZE];
+	struct msix_entry *msix_entries;
+
+	u64 rx_hdr_split;
+	u32 alloc_rx_page_failed;
+	u32 alloc_rx_buff_failed;
+
+	/* Some features need tri-state capability,
+	 * thus the additional *_CAPABLE flags.
+	 */
+	u32 flags;
+#define IXGBE_FLAG_RX_CSUM_ENABLED              (u32)(1)
+#define IXGBE_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 1)
+#define IXGBE_FLAG_RX_PS_CAPABLE                (u32)(1 << 2)
+#define IXGBE_FLAG_RX_PS_ENABLED                (u32)(1 << 3)
+#define IXGBE_FLAG_IN_NETPOLL                   (u32)(1 << 4)
+#define IXGBE_FLAG_IMIR_ENABLED                 (u32)(1 << 5)
+#define IXGBE_FLAG_MQ_CAPABLE                   (u32)(1 << 6)
+#define IXGBE_FLAG_NEED_LINK_UPDATE             (u32)(1 << 7)
+#define IXGBE_FLAG_IN_WATCHDOG_TASK             (u32)(1 << 8)
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct net_device_stats net_stats;
+
+	/* structs defined in ixgbe_vf.h */
+	struct ixgbe_hw hw;
+	u16 msg_enable;
+	struct ixgbevf_hw_stats stats;
+	u64 zero_base;
+	/* Interrupt Throttle Rate */
+	u32 eitr_param;
+
+	unsigned long state;
+	u32 *config_space;
+	u64 tx_busy;
+	unsigned int tx_ring_count;
+	unsigned int rx_ring_count;
+
+	u32 link_speed;
+	bool link_up;
+	unsigned long link_check_timeout;
+
+	struct work_struct watchdog_task;
+	bool netdev_registered;
+	bool dev_closed;
+};
+
+enum ixbgevf_state_t {
+	__IXGBEVF_TESTING,
+	__IXGBEVF_RESETTING,
+	__IXGBEVF_DOWN
+};
+
+enum ixgbevf_boards {
+	board_82599_vf,
+};
+
+extern struct ixgbevf_info ixgbevf_vf_info;
+extern struct ixgbe_mac_operations ixgbevf_mbx_ops;
+
+/* needed by ethtool.c */
+extern char ixgbevf_driver_name[];
+extern const char ixgbevf_driver_version[];
+
+extern int ixgbevf_up(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_down(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_reset(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_set_ethtool_ops(struct net_device *netdev);
+extern int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *,
+				      struct ixgbevf_ring *);
+extern int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *,
+				      struct ixgbevf_ring *);
+extern void ixgbevf_free_rx_resources(struct ixgbevf_adapter *,
+				      struct ixgbevf_ring *);
+extern void ixgbevf_free_tx_resources(struct ixgbevf_adapter *,
+				      struct ixgbevf_ring *);
+extern void ixgbevf_update_stats(struct ixgbevf_adapter *adapter);
+
+#ifdef ETHTOOL_OPS_COMPAT
+extern int ethtool_ioctl(struct ifreq *ifr);
+
+#endif
+extern void ixgbe_napi_add_all(struct ixgbevf_adapter *adapter);
+extern void ixgbe_napi_del_all(struct ixgbevf_adapter *adapter);
+
+#ifdef DEBUG
+extern char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw);
+#define hw_dbg(hw, format, arg...) \
+	printk(KERN_DEBUG "%s: " format, ixgbevf_get_hw_dev_name(hw), ##arg)
+#else
+#define hw_dbg(hw, format, arg...) do {} while (0)
+#endif
+
+#endif /* _IXGBEVF_H_ */
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
new file mode 100644
index 000000000000..39544afdc57f
--- /dev/null
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -0,0 +1,3571 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/******************************************************************************
+ Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
+******************************************************************************/
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#include "ixgbevf.h"
+
+char ixgbevf_driver_name[] = "ixgbevf";
+static const char ixgbevf_driver_string[] =
+	"Intel(R) 82599 Virtual Function";
+
+#define DRV_VERSION "1.0.0-k0"
+const char ixgbevf_driver_version[] = DRV_VERSION;
+static char ixgbevf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
+
+static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
+	[board_82599_vf] = &ixgbevf_vf_info,
+};
+
+/* ixgbevf_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ *   Class, Class Mask, private data (not used) }
+ */
+static struct pci_device_id ixgbevf_pci_tbl[] = {
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF),
+	board_82599_vf},
+
+	/* required last entry */
+	{0, }
+};
+MODULE_DEVICE_TABLE(pci, ixgbevf_pci_tbl);
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) 82599 Virtual Function Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+
+/* forward decls */
+static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector);
+static void ixgbevf_write_eitr(struct ixgbevf_adapter *adapter, int v_idx,
+			       u32 itr_reg);
+
+static inline void ixgbevf_release_rx_desc(struct ixgbe_hw *hw,
+					   struct ixgbevf_ring *rx_ring,
+					   u32 val)
+{
+	/*
+	 * Force memory writes to complete before letting h/w
+	 * know there are new descriptors to fetch.  (Only
+	 * applicable for weak-ordered memory model archs,
+	 * such as IA-64).
+	 */
+	wmb();
+	IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rx_ring->reg_idx), val);
+}
+
+/*
+ * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
+ * @adapter: pointer to adapter struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ *
+ */
+static void ixgbevf_set_ivar(struct ixgbevf_adapter *adapter, s8 direction,
+			     u8 queue, u8 msix_vector)
+{
+	u32 ivar, index;
+	struct ixgbe_hw *hw = &adapter->hw;
+	if (direction == -1) {
+		/* other causes */
+		msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+		ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
+		ivar &= ~0xFF;
+		ivar |= msix_vector;
+		IXGBE_WRITE_REG(hw, IXGBE_VTIVAR_MISC, ivar);
+	} else {
+		/* tx or rx causes */
+		msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+		index = ((16 * (queue & 1)) + (8 * direction));
+		ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR(queue >> 1));
+		ivar &= ~(0xFF << index);
+		ivar |= (msix_vector << index);
+		IXGBE_WRITE_REG(hw, IXGBE_VTIVAR(queue >> 1), ivar);
+	}
+}
+
+static void ixgbevf_unmap_and_free_tx_resource(struct ixgbevf_adapter *adapter,
+					       struct ixgbevf_tx_buffer
+					       *tx_buffer_info)
+{
+	if (tx_buffer_info->dma) {
+		if (tx_buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev,
+				       tx_buffer_info->dma,
+				       tx_buffer_info->length,
+				       PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev,
+					 tx_buffer_info->dma,
+					 tx_buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		tx_buffer_info->dma = 0;
+	}
+	if (tx_buffer_info->skb) {
+		dev_kfree_skb_any(tx_buffer_info->skb);
+		tx_buffer_info->skb = NULL;
+	}
+	tx_buffer_info->time_stamp = 0;
+	/* tx_buffer_info must be completely set up in the transmit path */
+}
+
+static inline bool ixgbevf_check_tx_hang(struct ixgbevf_adapter *adapter,
+					 struct ixgbevf_ring *tx_ring,
+					 unsigned int eop)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 head, tail;
+
+	/* Detect a transmit hang in hardware, this serializes the
+	 * check with the clearing of time_stamp and movement of eop */
+	head = readl(hw->hw_addr + tx_ring->head);
+	tail = readl(hw->hw_addr + tx_ring->tail);
+	adapter->detect_tx_hung = false;
+	if ((head != tail) &&
+	    tx_ring->tx_buffer_info[eop].time_stamp &&
+	    time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ)) {
+		/* detected Tx unit hang */
+		union ixgbe_adv_tx_desc *tx_desc;
+		tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
+		printk(KERN_ERR "Detected Tx Unit Hang\n"
+		       "  Tx Queue             <%d>\n"
+		       "  TDH, TDT             <%x>, <%x>\n"
+		       "  next_to_use          <%x>\n"
+		       "  next_to_clean        <%x>\n"
+		       "tx_buffer_info[next_to_clean]\n"
+		       "  time_stamp           <%lx>\n"
+		       "  jiffies              <%lx>\n",
+		       tx_ring->queue_index,
+		       head, tail,
+		       tx_ring->next_to_use, eop,
+		       tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+		return true;
+	}
+
+	return false;
+}
+
+#define IXGBE_MAX_TXD_PWR	14
+#define IXGBE_MAX_DATA_PER_TXD	(1 << IXGBE_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) (((S) >> IXGBE_MAX_TXD_PWR) + \
+			 (((S) & (IXGBE_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
+#ifdef MAX_SKB_FRAGS
+#define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \
+	MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1)      /* for context */
+#else
+#define DESC_NEEDED TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD)
+#endif
+
+static void ixgbevf_tx_timeout(struct net_device *netdev);
+
+/**
+ * ixgbevf_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ * @tx_ring: tx ring to clean
+ **/
+static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
+				 struct ixgbevf_ring *tx_ring)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
+	struct ixgbevf_tx_buffer *tx_buffer_info;
+	unsigned int i, eop, count = 0;
+	unsigned int total_bytes = 0, total_packets = 0;
+
+	i = tx_ring->next_to_clean;
+	eop = tx_ring->tx_buffer_info[i].next_to_watch;
+	eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
+
+	while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
+	       (count < tx_ring->work_limit)) {
+		bool cleaned = false;
+		for ( ; !cleaned; count++) {
+			struct sk_buff *skb;
+			tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
+			tx_buffer_info = &tx_ring->tx_buffer_info[i];
+			cleaned = (i == eop);
+			skb = tx_buffer_info->skb;
+
+			if (cleaned && skb) {
+				unsigned int segs, bytecount;
+
+				/* gso_segs is currently only valid for tcp */
+				segs = skb_shinfo(skb)->gso_segs ?: 1;
+				/* multiply data chunks by size of headers */
+				bytecount = ((segs - 1) * skb_headlen(skb)) +
+					    skb->len;
+				total_packets += segs;
+				total_bytes += bytecount;
+			}
+
+			ixgbevf_unmap_and_free_tx_resource(adapter,
+							   tx_buffer_info);
+
+			tx_desc->wb.status = 0;
+
+			i++;
+			if (i == tx_ring->count)
+				i = 0;
+		}
+
+		eop = tx_ring->tx_buffer_info[i].next_to_watch;
+		eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
+	}
+
+	tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+	if (unlikely(count && netif_carrier_ok(netdev) &&
+		     (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
+		/* Make sure that anybody stopping the queue after this
+		 * sees the new next_to_clean.
+		 */
+		smp_mb();
+#ifdef HAVE_TX_MQ
+		if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
+		    !test_bit(__IXGBEVF_DOWN, &adapter->state)) {
+			netif_wake_subqueue(netdev, tx_ring->queue_index);
+			++adapter->restart_queue;
+		}
+#else
+		if (netif_queue_stopped(netdev) &&
+		    !test_bit(__IXGBEVF_DOWN, &adapter->state)) {
+			netif_wake_queue(netdev);
+			++adapter->restart_queue;
+		}
+#endif
+	}
+
+	if (adapter->detect_tx_hung) {
+		if (ixgbevf_check_tx_hang(adapter, tx_ring, i)) {
+			/* schedule immediate reset if we believe we hung */
+			printk(KERN_INFO
+			       "tx hang %d detected, resetting adapter\n",
+			       adapter->tx_timeout_count + 1);
+			ixgbevf_tx_timeout(adapter->netdev);
+		}
+	}
+
+	/* re-arm the interrupt */
+	if ((count >= tx_ring->work_limit) &&
+	    (!test_bit(__IXGBEVF_DOWN, &adapter->state))) {
+		IXGBE_WRITE_REG(hw, IXGBE_VTEICS, tx_ring->v_idx);
+	}
+
+	tx_ring->total_bytes += total_bytes;
+	tx_ring->total_packets += total_packets;
+
+	adapter->net_stats.tx_bytes += total_bytes;
+	adapter->net_stats.tx_packets += total_packets;
+
+	return (count < tx_ring->work_limit);
+}
+
+/**
+ * ixgbevf_receive_skb - Send a completed packet up the stack
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: packet to send up
+ * @status: hardware indication of status of receive
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ * @rx_desc: rx descriptor
+ **/
+static void ixgbevf_receive_skb(struct ixgbevf_q_vector *q_vector,
+				struct sk_buff *skb, u8 status,
+				struct ixgbevf_ring *ring,
+				union ixgbe_adv_rx_desc *rx_desc)
+{
+	struct ixgbevf_adapter *adapter = q_vector->adapter;
+	bool is_vlan = (status & IXGBE_RXD_STAT_VP);
+	u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
+	int ret;
+
+	if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
+		if (adapter->vlgrp && is_vlan)
+			vlan_gro_receive(&q_vector->napi,
+					 adapter->vlgrp,
+					 tag, skb);
+		else
+			napi_gro_receive(&q_vector->napi, skb);
+	} else {
+		if (adapter->vlgrp && is_vlan)
+			ret = vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
+		else
+			ret = netif_rx(skb);
+	}
+}
+
+/**
+ * ixgbevf_rx_checksum - indicate in skb if hw indicated a good cksum
+ * @adapter: address of board private structure
+ * @status_err: hardware indication of status of receive
+ * @skb: skb currently being received and modified
+ **/
+static inline void ixgbevf_rx_checksum(struct ixgbevf_adapter *adapter,
+				       u32 status_err, struct sk_buff *skb)
+{
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* Rx csum disabled */
+	if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED))
+		return;
+
+	/* if IP and error */
+	if ((status_err & IXGBE_RXD_STAT_IPCS) &&
+	    (status_err & IXGBE_RXDADV_ERR_IPE)) {
+		adapter->hw_csum_rx_error++;
+		return;
+	}
+
+	if (!(status_err & IXGBE_RXD_STAT_L4CS))
+		return;
+
+	if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+		adapter->hw_csum_rx_error++;
+		return;
+	}
+
+	/* It must be a TCP or UDP packet with a valid checksum */
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	adapter->hw_csum_rx_good++;
+}
+
+/**
+ * ixgbevf_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+static void ixgbevf_alloc_rx_buffers(struct ixgbevf_adapter *adapter,
+				     struct ixgbevf_ring *rx_ring,
+				     int cleaned_count)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	union ixgbe_adv_rx_desc *rx_desc;
+	struct ixgbevf_rx_buffer *bi;
+	struct sk_buff *skb;
+	unsigned int i;
+	unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
+
+	i = rx_ring->next_to_use;
+	bi = &rx_ring->rx_buffer_info[i];
+
+	while (cleaned_count--) {
+		rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
+
+		if (!bi->page_dma &&
+		    (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
+			if (!bi->page) {
+				bi->page = netdev_alloc_page(adapter->netdev);
+				if (!bi->page) {
+					adapter->alloc_rx_page_failed++;
+					goto no_buffers;
+				}
+				bi->page_offset = 0;
+			} else {
+				/* use a half page if we're re-using */
+				bi->page_offset ^= (PAGE_SIZE / 2);
+			}
+
+			bi->page_dma = pci_map_page(pdev, bi->page,
+						    bi->page_offset,
+						    (PAGE_SIZE / 2),
+						    PCI_DMA_FROMDEVICE);
+		}
+
+		skb = bi->skb;
+		if (!skb) {
+			skb = netdev_alloc_skb(adapter->netdev,
+							       bufsz);
+
+			if (!skb) {
+				adapter->alloc_rx_buff_failed++;
+				goto no_buffers;
+			}
+
+			/*
+			 * Make buffer alignment 2 beyond a 16 byte boundary
+			 * this will result in a 16 byte aligned IP header after
+			 * the 14 byte MAC header is removed
+			 */
+			skb_reserve(skb, NET_IP_ALIGN);
+
+			bi->skb = skb;
+		}
+		if (!bi->dma) {
+			bi->dma = pci_map_single(pdev, skb->data,
+						 rx_ring->rx_buf_len,
+						 PCI_DMA_FROMDEVICE);
+		}
+		/* Refresh the desc even if buffer_addrs didn't change because
+		 * each write-back erases this info. */
+		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+			rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
+			rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
+		} else {
+			rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
+		}
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		bi = &rx_ring->rx_buffer_info[i];
+	}
+
+no_buffers:
+	if (rx_ring->next_to_use != i) {
+		rx_ring->next_to_use = i;
+		if (i-- == 0)
+			i = (rx_ring->count - 1);
+
+		ixgbevf_release_rx_desc(&adapter->hw, rx_ring, i);
+	}
+}
+
+static inline void ixgbevf_irq_enable_queues(struct ixgbevf_adapter *adapter,
+					     u64 qmask)
+{
+	u32 mask;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	mask = (qmask & 0xFFFFFFFF);
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
+}
+
+static inline u16 ixgbevf_get_hdr_info(union ixgbe_adv_rx_desc *rx_desc)
+{
+	return rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
+}
+
+static inline u16 ixgbevf_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
+{
+	return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+}
+
+static bool ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
+				 struct ixgbevf_ring *rx_ring,
+				 int *work_done, int work_to_do)
+{
+	struct ixgbevf_adapter *adapter = q_vector->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
+	struct ixgbevf_rx_buffer *rx_buffer_info, *next_buffer;
+	struct sk_buff *skb;
+	unsigned int i;
+	u32 len, staterr;
+	u16 hdr_info;
+	bool cleaned = false;
+	int cleaned_count = 0;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+	i = rx_ring->next_to_clean;
+	rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	rx_buffer_info = &rx_ring->rx_buffer_info[i];
+
+	while (staterr & IXGBE_RXD_STAT_DD) {
+		u32 upper_len = 0;
+		if (*work_done >= work_to_do)
+			break;
+		(*work_done)++;
+
+		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+			hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc));
+			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
+			       IXGBE_RXDADV_HDRBUFLEN_SHIFT;
+			if (hdr_info & IXGBE_RXDADV_SPH)
+				adapter->rx_hdr_split++;
+			if (len > IXGBEVF_RX_HDR_SIZE)
+				len = IXGBEVF_RX_HDR_SIZE;
+			upper_len = le16_to_cpu(rx_desc->wb.upper.length);
+		} else {
+			len = le16_to_cpu(rx_desc->wb.upper.length);
+		}
+		cleaned = true;
+		skb = rx_buffer_info->skb;
+		prefetch(skb->data - NET_IP_ALIGN);
+		rx_buffer_info->skb = NULL;
+
+		if (rx_buffer_info->dma) {
+			pci_unmap_single(pdev, rx_buffer_info->dma,
+					 rx_ring->rx_buf_len,
+					 PCI_DMA_FROMDEVICE);
+			rx_buffer_info->dma = 0;
+			skb_put(skb, len);
+		}
+
+		if (upper_len) {
+			pci_unmap_page(pdev, rx_buffer_info->page_dma,
+				       PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
+			rx_buffer_info->page_dma = 0;
+			skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+					   rx_buffer_info->page,
+					   rx_buffer_info->page_offset,
+					   upper_len);
+
+			if ((rx_ring->rx_buf_len > (PAGE_SIZE / 2)) ||
+			    (page_count(rx_buffer_info->page) != 1))
+				rx_buffer_info->page = NULL;
+			else
+				get_page(rx_buffer_info->page);
+
+			skb->len += upper_len;
+			skb->data_len += upper_len;
+			skb->truesize += upper_len;
+		}
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+
+		next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i);
+		prefetch(next_rxd);
+		cleaned_count++;
+
+		next_buffer = &rx_ring->rx_buffer_info[i];
+
+		if (!(staterr & IXGBE_RXD_STAT_EOP)) {
+			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+				rx_buffer_info->skb = next_buffer->skb;
+				rx_buffer_info->dma = next_buffer->dma;
+				next_buffer->skb = skb;
+				next_buffer->dma = 0;
+			} else {
+				skb->next = next_buffer->skb;
+				skb->next->prev = skb;
+			}
+			adapter->non_eop_descs++;
+			goto next_desc;
+		}
+
+		/* ERR_MASK will only have valid bits if EOP set */
+		if (unlikely(staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)) {
+			dev_kfree_skb_irq(skb);
+			goto next_desc;
+		}
+
+		ixgbevf_rx_checksum(adapter, staterr, skb);
+
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += skb->len;
+		total_rx_packets++;
+
+		/*
+		 * Work around issue of some types of VM to VM loop back
+		 * packets not getting split correctly
+		 */
+		if (staterr & IXGBE_RXD_STAT_LB) {
+			u32 header_fixup_len = skb->len - skb->data_len;
+			if (header_fixup_len < 14)
+				skb_push(skb, header_fixup_len);
+		}
+		skb->protocol = eth_type_trans(skb, adapter->netdev);
+
+		ixgbevf_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
+		adapter->netdev->last_rx = jiffies;
+
+next_desc:
+		rx_desc->wb.upper.status_error = 0;
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= IXGBEVF_RX_BUFFER_WRITE) {
+			ixgbevf_alloc_rx_buffers(adapter, rx_ring,
+						 cleaned_count);
+			cleaned_count = 0;
+		}
+
+		/* use prefetched values */
+		rx_desc = next_rxd;
+		rx_buffer_info = &rx_ring->rx_buffer_info[i];
+
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	}
+
+	rx_ring->next_to_clean = i;
+	cleaned_count = IXGBE_DESC_UNUSED(rx_ring);
+
+	if (cleaned_count)
+		ixgbevf_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
+
+	rx_ring->total_packets += total_rx_packets;
+	rx_ring->total_bytes += total_rx_bytes;
+	adapter->net_stats.rx_bytes += total_rx_bytes;
+	adapter->net_stats.rx_packets += total_rx_packets;
+
+	return cleaned;
+}
+
+/**
+ * ixgbevf_clean_rxonly - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function is optimized for cleaning one queue only on a single
+ * q_vector!!!
+ **/
+static int ixgbevf_clean_rxonly(struct napi_struct *napi, int budget)
+{
+	struct ixgbevf_q_vector *q_vector =
+		container_of(napi, struct ixgbevf_q_vector, napi);
+	struct ixgbevf_adapter *adapter = q_vector->adapter;
+	struct ixgbevf_ring *rx_ring = NULL;
+	int work_done = 0;
+	long r_idx;
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	rx_ring = &(adapter->rx_ring[r_idx]);
+
+	ixgbevf_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
+
+	/* If all Rx work done, exit the polling mode */
+	if (work_done < budget) {
+		napi_complete(napi);
+		if (adapter->itr_setting & 1)
+			ixgbevf_set_itr_msix(q_vector);
+		if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+			ixgbevf_irq_enable_queues(adapter, rx_ring->v_idx);
+	}
+
+	return work_done;
+}
+
+/**
+ * ixgbevf_clean_rxonly_many - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function will clean more than one rx queue associated with a
+ * q_vector.
+ **/
+static int ixgbevf_clean_rxonly_many(struct napi_struct *napi, int budget)
+{
+	struct ixgbevf_q_vector *q_vector =
+		container_of(napi, struct ixgbevf_q_vector, napi);
+	struct ixgbevf_adapter *adapter = q_vector->adapter;
+	struct ixgbevf_ring *rx_ring = NULL;
+	int work_done = 0, i;
+	long r_idx;
+	u64 enable_mask = 0;
+
+	/* attempt to distribute budget to each queue fairly, but don't allow
+	 * the budget to go below 1 because we'll exit polling */
+	budget /= (q_vector->rxr_count ?: 1);
+	budget = max(budget, 1);
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	for (i = 0; i < q_vector->rxr_count; i++) {
+		rx_ring = &(adapter->rx_ring[r_idx]);
+		ixgbevf_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
+		enable_mask |= rx_ring->v_idx;
+		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+				      r_idx + 1);
+	}
+
+#ifndef HAVE_NETDEV_NAPI_LIST
+	if (!netif_running(adapter->netdev))
+		work_done = 0;
+
+#endif
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	rx_ring = &(adapter->rx_ring[r_idx]);
+
+	/* If all Rx work done, exit the polling mode */
+	if (work_done < budget) {
+		napi_complete(napi);
+		if (adapter->itr_setting & 1)
+			ixgbevf_set_itr_msix(q_vector);
+		if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+			ixgbevf_irq_enable_queues(adapter, enable_mask);
+	}
+
+	return work_done;
+}
+
+
+/**
+ * ixgbevf_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
+ *
+ * ixgbevf_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ **/
+static void ixgbevf_configure_msix(struct ixgbevf_adapter *adapter)
+{
+	struct ixgbevf_q_vector *q_vector;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, j, q_vectors, v_idx, r_idx;
+	u32 mask;
+
+	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+	/*
+	 * Populate the IVAR table and set the ITR values to the
+	 * corresponding register.
+	 */
+	for (v_idx = 0; v_idx < q_vectors; v_idx++) {
+		q_vector = adapter->q_vector[v_idx];
+		/* XXX for_each_bit(...) */
+		r_idx = find_first_bit(q_vector->rxr_idx,
+				       adapter->num_rx_queues);
+
+		for (i = 0; i < q_vector->rxr_count; i++) {
+			j = adapter->rx_ring[r_idx].reg_idx;
+			ixgbevf_set_ivar(adapter, 0, j, v_idx);
+			r_idx = find_next_bit(q_vector->rxr_idx,
+					      adapter->num_rx_queues,
+					      r_idx + 1);
+		}
+		r_idx = find_first_bit(q_vector->txr_idx,
+				       adapter->num_tx_queues);
+
+		for (i = 0; i < q_vector->txr_count; i++) {
+			j = adapter->tx_ring[r_idx].reg_idx;
+			ixgbevf_set_ivar(adapter, 1, j, v_idx);
+			r_idx = find_next_bit(q_vector->txr_idx,
+					      adapter->num_tx_queues,
+					      r_idx + 1);
+		}
+
+		/* if this is a tx only vector halve the interrupt rate */
+		if (q_vector->txr_count && !q_vector->rxr_count)
+			q_vector->eitr = (adapter->eitr_param >> 1);
+		else if (q_vector->rxr_count)
+			/* rx only */
+			q_vector->eitr = adapter->eitr_param;
+
+		ixgbevf_write_eitr(adapter, v_idx, q_vector->eitr);
+	}
+
+	ixgbevf_set_ivar(adapter, -1, 1, v_idx);
+
+	/* set up to autoclear timer, and the vectors */
+	mask = IXGBE_EIMS_ENABLE_MASK;
+	mask &= ~IXGBE_EIMS_OTHER;
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIAC, mask);
+}
+
+enum latency_range {
+	lowest_latency = 0,
+	low_latency = 1,
+	bulk_latency = 2,
+	latency_invalid = 255
+};
+
+/**
+ * ixgbevf_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @eitr: eitr setting (ints per sec) to give last timeslice
+ * @itr_setting: current throttle rate in ints/second
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ *      Stores a new ITR value based on packets and byte
+ *      counts during the last interrupt.  The advantage of per interrupt
+ *      computation is faster updates and more accurate ITR for the current
+ *      traffic pattern.  Constants in this function were computed
+ *      based on theoretical maximum wire speed and thresholds were set based
+ *      on testing data as well as attempting to minimize response time
+ *      while increasing bulk throughput.
+ **/
+static u8 ixgbevf_update_itr(struct ixgbevf_adapter *adapter,
+			     u32 eitr, u8 itr_setting,
+			     int packets, int bytes)
+{
+	unsigned int retval = itr_setting;
+	u32 timepassed_us;
+	u64 bytes_perint;
+
+	if (packets == 0)
+		goto update_itr_done;
+
+
+	/* simple throttlerate management
+	 *    0-20MB/s lowest (100000 ints/s)
+	 *   20-100MB/s low   (20000 ints/s)
+	 *  100-1249MB/s bulk (8000 ints/s)
+	 */
+	/* what was last interrupt timeslice? */
+	timepassed_us = 1000000/eitr;
+	bytes_perint = bytes / timepassed_us; /* bytes/usec */
+
+	switch (itr_setting) {
+	case lowest_latency:
+		if (bytes_perint > adapter->eitr_low)
+			retval = low_latency;
+		break;
+	case low_latency:
+		if (bytes_perint > adapter->eitr_high)
+			retval = bulk_latency;
+		else if (bytes_perint <= adapter->eitr_low)
+			retval = lowest_latency;
+		break;
+	case bulk_latency:
+		if (bytes_perint <= adapter->eitr_high)
+			retval = low_latency;
+		break;
+	}
+
+update_itr_done:
+	return retval;
+}
+
+/**
+ * ixgbevf_write_eitr - write VTEITR register in hardware specific way
+ * @adapter: pointer to adapter struct
+ * @v_idx: vector index into q_vector array
+ * @itr_reg: new value to be written in *register* format, not ints/s
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update VTEITR registers at runtime.  Hardware
+ * specific quirks/differences are taken care of here.
+ */
+static void ixgbevf_write_eitr(struct ixgbevf_adapter *adapter, int v_idx,
+			       u32 itr_reg)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	itr_reg = EITR_INTS_PER_SEC_TO_REG(itr_reg);
+
+	/*
+	 * set the WDIS bit to not clear the timer bits and cause an
+	 * immediate assertion of the interrupt
+	 */
+	itr_reg |= IXGBE_EITR_CNT_WDIS;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VTEITR(v_idx), itr_reg);
+}
+
+static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector)
+{
+	struct ixgbevf_adapter *adapter = q_vector->adapter;
+	u32 new_itr;
+	u8 current_itr, ret_itr;
+	int i, r_idx, v_idx = q_vector->v_idx;
+	struct ixgbevf_ring *rx_ring, *tx_ring;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		tx_ring = &(adapter->tx_ring[r_idx]);
+		ret_itr = ixgbevf_update_itr(adapter, q_vector->eitr,
+					     q_vector->tx_itr,
+					     tx_ring->total_packets,
+					     tx_ring->total_bytes);
+		/* if the result for this queue would decrease interrupt
+		 * rate for this vector then use that result */
+		q_vector->tx_itr = ((q_vector->tx_itr > ret_itr) ?
+				    q_vector->tx_itr - 1 : ret_itr);
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+				      r_idx + 1);
+	}
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	for (i = 0; i < q_vector->rxr_count; i++) {
+		rx_ring = &(adapter->rx_ring[r_idx]);
+		ret_itr = ixgbevf_update_itr(adapter, q_vector->eitr,
+					     q_vector->rx_itr,
+					     rx_ring->total_packets,
+					     rx_ring->total_bytes);
+		/* if the result for this queue would decrease interrupt
+		 * rate for this vector then use that result */
+		q_vector->rx_itr = ((q_vector->rx_itr > ret_itr) ?
+				    q_vector->rx_itr - 1 : ret_itr);
+		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+				      r_idx + 1);
+	}
+
+	current_itr = max(q_vector->rx_itr, q_vector->tx_itr);
+
+	switch (current_itr) {
+	/* counts and packets in update_itr are dependent on these numbers */
+	case lowest_latency:
+		new_itr = 100000;
+		break;
+	case low_latency:
+		new_itr = 20000; /* aka hwitr = ~200 */
+		break;
+	case bulk_latency:
+	default:
+		new_itr = 8000;
+		break;
+	}
+
+	if (new_itr != q_vector->eitr) {
+		u32 itr_reg;
+
+		/* save the algorithm value here, not the smoothed one */
+		q_vector->eitr = new_itr;
+		/* do an exponential smoothing */
+		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
+		itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
+		ixgbevf_write_eitr(adapter, v_idx, itr_reg);
+	}
+
+	return;
+}
+
+static irqreturn_t ixgbevf_msix_mbx(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 eicr;
+
+	eicr = IXGBE_READ_REG(hw, IXGBE_VTEICS);
+	IXGBE_WRITE_REG(hw, IXGBE_VTEICR, eicr);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data)
+{
+	struct ixgbevf_q_vector *q_vector = data;
+	struct ixgbevf_adapter  *adapter = q_vector->adapter;
+	struct ixgbevf_ring     *tx_ring;
+	int i, r_idx;
+
+	if (!q_vector->txr_count)
+		return IRQ_HANDLED;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		tx_ring = &(adapter->tx_ring[r_idx]);
+		tx_ring->total_bytes = 0;
+		tx_ring->total_packets = 0;
+		ixgbevf_clean_tx_irq(adapter, tx_ring);
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+				      r_idx + 1);
+	}
+
+	if (adapter->itr_setting & 1)
+		ixgbevf_set_itr_msix(q_vector);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ixgbe_msix_clean_rx - single unshared vector rx clean (all queues)
+ * @irq: unused
+ * @data: pointer to our q_vector struct for this interrupt vector
+ **/
+static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data)
+{
+	struct ixgbevf_q_vector *q_vector = data;
+	struct ixgbevf_adapter  *adapter = q_vector->adapter;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbevf_ring  *rx_ring;
+	int r_idx;
+	int i;
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	for (i = 0; i < q_vector->rxr_count; i++) {
+		rx_ring = &(adapter->rx_ring[r_idx]);
+		rx_ring->total_bytes = 0;
+		rx_ring->total_packets = 0;
+		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+				      r_idx + 1);
+	}
+
+	if (!q_vector->rxr_count)
+		return IRQ_HANDLED;
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	rx_ring = &(adapter->rx_ring[r_idx]);
+	/* disable interrupts on this vector only */
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, rx_ring->v_idx);
+	napi_schedule(&q_vector->napi);
+
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbevf_msix_clean_many(int irq, void *data)
+{
+	ixgbevf_msix_clean_rx(irq, data);
+	ixgbevf_msix_clean_tx(irq, data);
+
+	return IRQ_HANDLED;
+}
+
+static inline void map_vector_to_rxq(struct ixgbevf_adapter *a, int v_idx,
+				     int r_idx)
+{
+	struct ixgbevf_q_vector *q_vector = a->q_vector[v_idx];
+
+	set_bit(r_idx, q_vector->rxr_idx);
+	q_vector->rxr_count++;
+	a->rx_ring[r_idx].v_idx = 1 << v_idx;
+}
+
+static inline void map_vector_to_txq(struct ixgbevf_adapter *a, int v_idx,
+				     int t_idx)
+{
+	struct ixgbevf_q_vector *q_vector = a->q_vector[v_idx];
+
+	set_bit(t_idx, q_vector->txr_idx);
+	q_vector->txr_count++;
+	a->tx_ring[t_idx].v_idx = 1 << v_idx;
+}
+
+/**
+ * ixgbevf_map_rings_to_vectors - Maps descriptor rings to vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function maps descriptor rings to the queue-specific vectors
+ * we were allotted through the MSI-X enabling code.  Ideally, we'd have
+ * one vector per ring/queue, but on a constrained vector budget, we
+ * group the rings as "efficiently" as possible.  You would add new
+ * mapping configurations in here.
+ **/
+static int ixgbevf_map_rings_to_vectors(struct ixgbevf_adapter *adapter)
+{
+	int q_vectors;
+	int v_start = 0;
+	int rxr_idx = 0, txr_idx = 0;
+	int rxr_remaining = adapter->num_rx_queues;
+	int txr_remaining = adapter->num_tx_queues;
+	int i, j;
+	int rqpv, tqpv;
+	int err = 0;
+
+	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+	/*
+	 * The ideal configuration...
+	 * We have enough vectors to map one per queue.
+	 */
+	if (q_vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
+		for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
+			map_vector_to_rxq(adapter, v_start, rxr_idx);
+
+		for (; txr_idx < txr_remaining; v_start++, txr_idx++)
+			map_vector_to_txq(adapter, v_start, txr_idx);
+		goto out;
+	}
+
+	/*
+	 * If we don't have enough vectors for a 1-to-1
+	 * mapping, we'll have to group them so there are
+	 * multiple queues per vector.
+	 */
+	/* Re-adjusting *qpv takes care of the remainder. */
+	for (i = v_start; i < q_vectors; i++) {
+		rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - i);
+		for (j = 0; j < rqpv; j++) {
+			map_vector_to_rxq(adapter, i, rxr_idx);
+			rxr_idx++;
+			rxr_remaining--;
+		}
+	}
+	for (i = v_start; i < q_vectors; i++) {
+		tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - i);
+		for (j = 0; j < tqpv; j++) {
+			map_vector_to_txq(adapter, i, txr_idx);
+			txr_idx++;
+			txr_remaining--;
+		}
+	}
+
+out:
+	return err;
+}
+
+/**
+ * ixgbevf_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * ixgbevf_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int ixgbevf_request_msix_irqs(struct ixgbevf_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	irqreturn_t (*handler)(int, void *);
+	int i, vector, q_vectors, err;
+	int ri = 0, ti = 0;
+
+	/* Decrement for Other and TCP Timer vectors */
+	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+#define SET_HANDLER(_v) (((_v)->rxr_count && (_v)->txr_count)          \
+					  ? &ixgbevf_msix_clean_many : \
+			  (_v)->rxr_count ? &ixgbevf_msix_clean_rx   : \
+			  (_v)->txr_count ? &ixgbevf_msix_clean_tx   : \
+			  NULL)
+	for (vector = 0; vector < q_vectors; vector++) {
+		handler = SET_HANDLER(adapter->q_vector[vector]);
+
+		if (handler == &ixgbevf_msix_clean_rx) {
+			sprintf(adapter->name[vector], "%s-%s-%d",
+				netdev->name, "rx", ri++);
+		} else if (handler == &ixgbevf_msix_clean_tx) {
+			sprintf(adapter->name[vector], "%s-%s-%d",
+				netdev->name, "tx", ti++);
+		} else if (handler == &ixgbevf_msix_clean_many) {
+			sprintf(adapter->name[vector], "%s-%s-%d",
+				netdev->name, "TxRx", vector);
+		} else {
+			/* skip this unused q_vector */
+			continue;
+		}
+		err = request_irq(adapter->msix_entries[vector].vector,
+				  handler, 0, adapter->name[vector],
+				  adapter->q_vector[vector]);
+		if (err) {
+			hw_dbg(&adapter->hw,
+			       "request_irq failed for MSIX interrupt "
+			       "Error: %d\n", err);
+			goto free_queue_irqs;
+		}
+	}
+
+	sprintf(adapter->name[vector], "%s:mbx", netdev->name);
+	err = request_irq(adapter->msix_entries[vector].vector,
+			  &ixgbevf_msix_mbx, 0, adapter->name[vector], netdev);
+	if (err) {
+		hw_dbg(&adapter->hw,
+		       "request_irq for msix_mbx failed: %d\n", err);
+		goto free_queue_irqs;
+	}
+
+	return 0;
+
+free_queue_irqs:
+	for (i = vector - 1; i >= 0; i--)
+		free_irq(adapter->msix_entries[--vector].vector,
+			 &(adapter->q_vector[i]));
+	pci_disable_msix(adapter->pdev);
+	kfree(adapter->msix_entries);
+	adapter->msix_entries = NULL;
+	return err;
+}
+
+static inline void ixgbevf_reset_q_vectors(struct ixgbevf_adapter *adapter)
+{
+	int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+	for (i = 0; i < q_vectors; i++) {
+		struct ixgbevf_q_vector *q_vector = adapter->q_vector[i];
+		bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
+		bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
+		q_vector->rxr_count = 0;
+		q_vector->txr_count = 0;
+		q_vector->eitr = adapter->eitr_param;
+	}
+}
+
+/**
+ * ixgbevf_request_irq - initialize interrupts
+ * @adapter: board private structure
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int ixgbevf_request_irq(struct ixgbevf_adapter *adapter)
+{
+	int err = 0;
+
+	err = ixgbevf_request_msix_irqs(adapter);
+
+	if (err)
+		hw_dbg(&adapter->hw,
+		       "request_irq failed, Error %d\n", err);
+
+	return err;
+}
+
+static void ixgbevf_free_irq(struct ixgbevf_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int i, q_vectors;
+
+	q_vectors = adapter->num_msix_vectors;
+
+	i = q_vectors - 1;
+
+	free_irq(adapter->msix_entries[i].vector, netdev);
+	i--;
+
+	for (; i >= 0; i--) {
+		free_irq(adapter->msix_entries[i].vector,
+			 adapter->q_vector[i]);
+	}
+
+	ixgbevf_reset_q_vectors(adapter);
+}
+
+/**
+ * ixgbevf_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static inline void ixgbevf_irq_disable(struct ixgbevf_adapter *adapter)
+{
+	int i;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, ~0);
+
+	IXGBE_WRITE_FLUSH(hw);
+
+	for (i = 0; i < adapter->num_msix_vectors; i++)
+		synchronize_irq(adapter->msix_entries[i].vector);
+}
+
+/**
+ * ixgbevf_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static inline void ixgbevf_irq_enable(struct ixgbevf_adapter *adapter,
+				      bool queues, bool flush)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 mask;
+	u64 qmask;
+
+	mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
+	qmask = ~0;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
+
+	if (queues)
+		ixgbevf_irq_enable_queues(adapter, qmask);
+
+	if (flush)
+		IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbevf_configure_tx - Configure 82599 VF Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void ixgbevf_configure_tx(struct ixgbevf_adapter *adapter)
+{
+	u64 tdba;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 i, j, tdlen, txctrl;
+
+	/* Setup the HW Tx Head and Tail descriptor pointers */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbevf_ring *ring = &adapter->tx_ring[i];
+		j = ring->reg_idx;
+		tdba = ring->dma;
+		tdlen = ring->count * sizeof(union ixgbe_adv_tx_desc);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDBAL(j),
+				(tdba & DMA_BIT_MASK(32)));
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDBAH(j), (tdba >> 32));
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDLEN(j), tdlen);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDH(j), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTDT(j), 0);
+		adapter->tx_ring[i].head = IXGBE_VFTDH(j);
+		adapter->tx_ring[i].tail = IXGBE_VFTDT(j);
+		/* Disable Tx Head Writeback RO bit, since this hoses
+		 * bookkeeping if things aren't delivered in order.
+		 */
+		txctrl = IXGBE_READ_REG(hw, IXGBE_VFDCA_TXCTRL(j));
+		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(j), txctrl);
+	}
+}
+
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT	2
+
+static void ixgbevf_configure_srrctl(struct ixgbevf_adapter *adapter, int index)
+{
+	struct ixgbevf_ring *rx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 srrctl;
+
+	rx_ring = &adapter->rx_ring[index];
+
+	srrctl = IXGBE_SRRCTL_DROP_EN;
+
+	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+		u16 bufsz = IXGBEVF_RXBUFFER_2048;
+		/* grow the amount we can receive on large page machines */
+		if (bufsz < (PAGE_SIZE / 2))
+			bufsz = (PAGE_SIZE / 2);
+		/* cap the bufsz at our largest descriptor size */
+		bufsz = min((u16)IXGBEVF_MAX_RXBUFFER, bufsz);
+
+		srrctl |= bufsz >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+		srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+		srrctl |= ((IXGBEVF_RX_HDR_SIZE <<
+			   IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
+			   IXGBE_SRRCTL_BSIZEHDR_MASK);
+	} else {
+		srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
+
+		if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
+			srrctl |= IXGBEVF_RXBUFFER_2048 >>
+				IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+		else
+			srrctl |= rx_ring->rx_buf_len >>
+				IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(index), srrctl);
+}
+
+/**
+ * ixgbevf_configure_rx - Configure 82599 VF Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void ixgbevf_configure_rx(struct ixgbevf_adapter *adapter)
+{
+	u64 rdba;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+	int i, j;
+	u32 rdlen;
+	int rx_buf_len;
+
+	/* Decide whether to use packet split mode or not */
+	if (netdev->mtu > ETH_DATA_LEN) {
+		if (adapter->flags & IXGBE_FLAG_RX_PS_CAPABLE)
+			adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+		else
+			adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+	} else {
+		if (adapter->flags & IXGBE_FLAG_RX_1BUF_CAPABLE)
+			adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+		else
+			adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+	}
+
+	/* Set the RX buffer length according to the mode */
+	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+		/* PSRTYPE must be initialized in 82599 */
+		u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
+			IXGBE_PSRTYPE_UDPHDR |
+			IXGBE_PSRTYPE_IPV4HDR |
+			IXGBE_PSRTYPE_IPV6HDR |
+			IXGBE_PSRTYPE_L2HDR;
+		IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, psrtype);
+		rx_buf_len = IXGBEVF_RX_HDR_SIZE;
+	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+		if (netdev->mtu <= ETH_DATA_LEN)
+			rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+		else
+			rx_buf_len = ALIGN(max_frame, 1024);
+	}
+
+	rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
+	/* Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring */
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		rdba = adapter->rx_ring[i].dma;
+		j = adapter->rx_ring[i].reg_idx;
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDBAL(j),
+				(rdba & DMA_BIT_MASK(32)));
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDBAH(j), (rdba >> 32));
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDLEN(j), rdlen);
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDH(j), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFRDT(j), 0);
+		adapter->rx_ring[i].head = IXGBE_VFRDH(j);
+		adapter->rx_ring[i].tail = IXGBE_VFRDT(j);
+		adapter->rx_ring[i].rx_buf_len = rx_buf_len;
+
+		ixgbevf_configure_srrctl(adapter, j);
+	}
+}
+
+static void ixgbevf_vlan_rx_register(struct net_device *netdev,
+				     struct vlan_group *grp)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, j;
+	u32 ctrl;
+
+	adapter->vlgrp = grp;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		j = adapter->rx_ring[i].reg_idx;
+		ctrl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j));
+		ctrl |= IXGBE_RXDCTL_VME;
+		IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(j), ctrl);
+	}
+}
+
+static void ixgbevf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *v_netdev;
+
+	/* add VID to filter table */
+	if (hw->mac.ops.set_vfta)
+		hw->mac.ops.set_vfta(hw, vid, 0, true);
+	/*
+	 * Copy feature flags from netdev to the vlan netdev for this vid.
+	 * This allows things like TSO to bubble down to our vlan device.
+	 */
+	v_netdev = vlan_group_get_device(adapter->vlgrp, vid);
+	v_netdev->features |= adapter->netdev->features;
+	vlan_group_set_device(adapter->vlgrp, vid, v_netdev);
+}
+
+static void ixgbevf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+		ixgbevf_irq_disable(adapter);
+
+	vlan_group_set_device(adapter->vlgrp, vid, NULL);
+
+	if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+		ixgbevf_irq_enable(adapter, true, true);
+
+	/* remove VID from filter table */
+	if (hw->mac.ops.set_vfta)
+		hw->mac.ops.set_vfta(hw, vid, 0, false);
+}
+
+static void ixgbevf_restore_vlan(struct ixgbevf_adapter *adapter)
+{
+	ixgbevf_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+	if (adapter->vlgrp) {
+		u16 vid;
+		for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+			if (!vlan_group_get_device(adapter->vlgrp, vid))
+				continue;
+			ixgbevf_vlan_rx_add_vid(adapter->netdev, vid);
+		}
+	}
+}
+
+static u8 *ixgbevf_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+				 u32 *vmdq)
+{
+	struct dev_mc_list *mc_ptr;
+	u8 *addr = *mc_addr_ptr;
+	*vmdq = 0;
+
+	mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]);
+	if (mc_ptr->next)
+		*mc_addr_ptr = mc_ptr->next->dmi_addr;
+	else
+		*mc_addr_ptr = NULL;
+
+	return addr;
+}
+
+/**
+ * ixgbevf_set_rx_mode - Multicast set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_method entry point is called whenever the multicast address
+ * list or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper multicast mode.
+ **/
+static void ixgbevf_set_rx_mode(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u8 *addr_list = NULL;
+	int addr_count = 0;
+
+	/* reprogram multicast list */
+	addr_count = netdev->mc_count;
+	if (addr_count)
+		addr_list = netdev->mc_list->dmi_addr;
+	if (hw->mac.ops.update_mc_addr_list)
+		hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
+						ixgbevf_addr_list_itr);
+}
+
+static void ixgbevf_napi_enable_all(struct ixgbevf_adapter *adapter)
+{
+	int q_idx;
+	struct ixgbevf_q_vector *q_vector;
+	int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+		struct napi_struct *napi;
+		q_vector = adapter->q_vector[q_idx];
+		if (!q_vector->rxr_count)
+			continue;
+		napi = &q_vector->napi;
+		if (q_vector->rxr_count > 1)
+			napi->poll = &ixgbevf_clean_rxonly_many;
+
+		napi_enable(napi);
+	}
+}
+
+static void ixgbevf_napi_disable_all(struct ixgbevf_adapter *adapter)
+{
+	int q_idx;
+	struct ixgbevf_q_vector *q_vector;
+	int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+		q_vector = adapter->q_vector[q_idx];
+		if (!q_vector->rxr_count)
+			continue;
+		napi_disable(&q_vector->napi);
+	}
+}
+
+static void ixgbevf_configure(struct ixgbevf_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int i;
+
+	ixgbevf_set_rx_mode(netdev);
+
+	ixgbevf_restore_vlan(adapter);
+
+	ixgbevf_configure_tx(adapter);
+	ixgbevf_configure_rx(adapter);
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ixgbevf_ring *ring = &adapter->rx_ring[i];
+		ixgbevf_alloc_rx_buffers(adapter, ring, ring->count);
+		ring->next_to_use = ring->count - 1;
+		writel(ring->next_to_use, adapter->hw.hw_addr + ring->tail);
+	}
+}
+
+#define IXGBE_MAX_RX_DESC_POLL 10
+static inline void ixgbevf_rx_desc_queue_enable(struct ixgbevf_adapter *adapter,
+						int rxr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int j = adapter->rx_ring[rxr].reg_idx;
+	int k;
+
+	for (k = 0; k < IXGBE_MAX_RX_DESC_POLL; k++) {
+		if (IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j)) & IXGBE_RXDCTL_ENABLE)
+			break;
+		else
+			msleep(1);
+	}
+	if (k >= IXGBE_MAX_RX_DESC_POLL) {
+		hw_dbg(hw, "RXDCTL.ENABLE on Rx queue %d "
+		       "not set within the polling period\n", rxr);
+	}
+
+	ixgbevf_release_rx_desc(&adapter->hw, &adapter->rx_ring[rxr],
+				(adapter->rx_ring[rxr].count - 1));
+}
+
+static int ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, j = 0;
+	int num_rx_rings = adapter->num_rx_queues;
+	u32 txdctl, rxdctl;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		j = adapter->tx_ring[i].reg_idx;
+		txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
+		/* enable WTHRESH=8 descriptors, to encourage burst writeback */
+		txdctl |= (8 << 16);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j), txdctl);
+	}
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		j = adapter->tx_ring[i].reg_idx;
+		txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
+		txdctl |= IXGBE_TXDCTL_ENABLE;
+		IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j), txdctl);
+	}
+
+	for (i = 0; i < num_rx_rings; i++) {
+		j = adapter->rx_ring[i].reg_idx;
+		rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j));
+		rxdctl |= IXGBE_RXDCTL_ENABLE;
+		IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(j), rxdctl);
+		ixgbevf_rx_desc_queue_enable(adapter, i);
+	}
+
+	ixgbevf_configure_msix(adapter);
+
+	if (hw->mac.ops.set_rar) {
+		if (is_valid_ether_addr(hw->mac.addr))
+			hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
+		else
+			hw->mac.ops.set_rar(hw, 0, hw->mac.perm_addr, 0);
+	}
+
+	clear_bit(__IXGBEVF_DOWN, &adapter->state);
+	ixgbevf_napi_enable_all(adapter);
+
+	/* enable transmits */
+	netif_tx_start_all_queues(netdev);
+
+	/* bring the link up in the watchdog, this could race with our first
+	 * link up interrupt but shouldn't be a problem */
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+	adapter->link_check_timeout = jiffies;
+	mod_timer(&adapter->watchdog_timer, jiffies);
+	return 0;
+}
+
+int ixgbevf_up(struct ixgbevf_adapter *adapter)
+{
+	int err;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	ixgbevf_configure(adapter);
+
+	err = ixgbevf_up_complete(adapter);
+
+	/* clear any pending interrupts, may auto mask */
+	IXGBE_READ_REG(hw, IXGBE_VTEICR);
+
+	ixgbevf_irq_enable(adapter, true, true);
+
+	return err;
+}
+
+/**
+ * ixgbevf_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+static void ixgbevf_clean_rx_ring(struct ixgbevf_adapter *adapter,
+				  struct ixgbevf_ring *rx_ring)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	unsigned long size;
+	unsigned int i;
+
+	/* Free all the Rx ring sk_buffs */
+
+	for (i = 0; i < rx_ring->count; i++) {
+		struct ixgbevf_rx_buffer *rx_buffer_info;
+
+		rx_buffer_info = &rx_ring->rx_buffer_info[i];
+		if (rx_buffer_info->dma) {
+			pci_unmap_single(pdev, rx_buffer_info->dma,
+					 rx_ring->rx_buf_len,
+					 PCI_DMA_FROMDEVICE);
+			rx_buffer_info->dma = 0;
+		}
+		if (rx_buffer_info->skb) {
+			struct sk_buff *skb = rx_buffer_info->skb;
+			rx_buffer_info->skb = NULL;
+			do {
+				struct sk_buff *this = skb;
+				skb = skb->prev;
+				dev_kfree_skb(this);
+			} while (skb);
+		}
+		if (!rx_buffer_info->page)
+			continue;
+		pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2,
+			       PCI_DMA_FROMDEVICE);
+		rx_buffer_info->page_dma = 0;
+		put_page(rx_buffer_info->page);
+		rx_buffer_info->page = NULL;
+		rx_buffer_info->page_offset = 0;
+	}
+
+	size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
+	memset(rx_ring->rx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(rx_ring->desc, 0, rx_ring->size);
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+
+	if (rx_ring->head)
+		writel(0, adapter->hw.hw_addr + rx_ring->head);
+	if (rx_ring->tail)
+		writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
+/**
+ * ixgbevf_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+static void ixgbevf_clean_tx_ring(struct ixgbevf_adapter *adapter,
+				  struct ixgbevf_ring *tx_ring)
+{
+	struct ixgbevf_tx_buffer *tx_buffer_info;
+	unsigned long size;
+	unsigned int i;
+
+	/* Free all the Tx ring sk_buffs */
+
+	for (i = 0; i < tx_ring->count; i++) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		ixgbevf_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+	}
+
+	size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
+	memset(tx_ring->tx_buffer_info, 0, size);
+
+	memset(tx_ring->desc, 0, tx_ring->size);
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+
+	if (tx_ring->head)
+		writel(0, adapter->hw.hw_addr + tx_ring->head);
+	if (tx_ring->tail)
+		writel(0, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+/**
+ * ixgbevf_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbevf_clean_all_rx_rings(struct ixgbevf_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		ixgbevf_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbevf_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbevf_clean_all_tx_rings(struct ixgbevf_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		ixgbevf_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+void ixgbevf_down(struct ixgbevf_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 txdctl;
+	int i, j;
+
+	/* signal that we are down to the interrupt handler */
+	set_bit(__IXGBEVF_DOWN, &adapter->state);
+	/* disable receives */
+
+	netif_tx_disable(netdev);
+
+	msleep(10);
+
+	netif_tx_stop_all_queues(netdev);
+
+	ixgbevf_irq_disable(adapter);
+
+	ixgbevf_napi_disable_all(adapter);
+
+	del_timer_sync(&adapter->watchdog_timer);
+	/* can't call flush scheduled work here because it can deadlock
+	 * if linkwatch_event tries to acquire the rtnl_lock which we are
+	 * holding */
+	while (adapter->flags & IXGBE_FLAG_IN_WATCHDOG_TASK)
+		msleep(1);
+
+	/* disable transmits in the hardware now that interrupts are off */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		j = adapter->tx_ring[i].reg_idx;
+		txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
+		IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j),
+				(txdctl & ~IXGBE_TXDCTL_ENABLE));
+	}
+
+	netif_carrier_off(netdev);
+
+	if (!pci_channel_offline(adapter->pdev))
+		ixgbevf_reset(adapter);
+
+	ixgbevf_clean_all_tx_rings(adapter);
+	ixgbevf_clean_all_rx_rings(adapter);
+}
+
+void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
+		msleep(1);
+
+	ixgbevf_down(adapter);
+	ixgbevf_up(adapter);
+
+	clear_bit(__IXGBEVF_RESETTING, &adapter->state);
+}
+
+void ixgbevf_reset(struct ixgbevf_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+
+	if (hw->mac.ops.reset_hw(hw))
+		hw_dbg(hw, "PF still resetting\n");
+	else
+		hw->mac.ops.init_hw(hw);
+
+	if (is_valid_ether_addr(adapter->hw.mac.addr)) {
+		memcpy(netdev->dev_addr, adapter->hw.mac.addr,
+		       netdev->addr_len);
+		memcpy(netdev->perm_addr, adapter->hw.mac.addr,
+		       netdev->addr_len);
+	}
+}
+
+static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
+					 int vectors)
+{
+	int err, vector_threshold;
+
+	/* We'll want at least 3 (vector_threshold):
+	 * 1) TxQ[0] Cleanup
+	 * 2) RxQ[0] Cleanup
+	 * 3) Other (Link Status Change, etc.)
+	 */
+	vector_threshold = MIN_MSIX_COUNT;
+
+	/* The more we get, the more we will assign to Tx/Rx Cleanup
+	 * for the separate queues...where Rx Cleanup >= Tx Cleanup.
+	 * Right now, we simply care about how many we'll get; we'll
+	 * set them up later while requesting irq's.
+	 */
+	while (vectors >= vector_threshold) {
+		err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+				      vectors);
+		if (!err) /* Success in acquiring all requested vectors. */
+			break;
+		else if (err < 0)
+			vectors = 0; /* Nasty failure, quit now */
+		else /* err == number of vectors we should try again with */
+			vectors = err;
+	}
+
+	if (vectors < vector_threshold) {
+		/* Can't allocate enough MSI-X interrupts?  Oh well.
+		 * This just means we'll go with either a single MSI
+		 * vector or fall back to legacy interrupts.
+		 */
+		hw_dbg(&adapter->hw,
+		       "Unable to allocate MSI-X interrupts\n");
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+	} else {
+		/*
+		 * Adjust for only the vectors we'll use, which is minimum
+		 * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
+		 * vectors we were allocated.
+		 */
+		adapter->num_msix_vectors = vectors;
+	}
+}
+
+/*
+ * ixgbe_set_num_queues: Allocate queues for device, feature dependant
+ * @adapter: board private structure to initialize
+ *
+ * This is the top level queue allocation routine.  The order here is very
+ * important, starting with the "most" number of features turned on at once,
+ * and ending with the smallest set of features.  This way large combinations
+ * can be allocated if they're turned on, and smaller combinations are the
+ * fallthrough conditions.
+ *
+ **/
+static void ixgbevf_set_num_queues(struct ixgbevf_adapter *adapter)
+{
+	/* Start with base case */
+	adapter->num_rx_queues = 1;
+	adapter->num_tx_queues = 1;
+	adapter->num_rx_pools = adapter->num_rx_queues;
+	adapter->num_rx_queues_per_pool = 1;
+}
+
+/**
+ * ixgbevf_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.  The polling_netdev array is
+ * intended for Multiqueue, but should work fine with a single queue.
+ **/
+static int ixgbevf_alloc_queues(struct ixgbevf_adapter *adapter)
+{
+	int i;
+
+	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+				   sizeof(struct ixgbevf_ring), GFP_KERNEL);
+	if (!adapter->tx_ring)
+		goto err_tx_ring_allocation;
+
+	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+				   sizeof(struct ixgbevf_ring), GFP_KERNEL);
+	if (!adapter->rx_ring)
+		goto err_rx_ring_allocation;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		adapter->tx_ring[i].count = adapter->tx_ring_count;
+		adapter->tx_ring[i].queue_index = i;
+		adapter->tx_ring[i].reg_idx = i;
+	}
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		adapter->rx_ring[i].count = adapter->rx_ring_count;
+		adapter->rx_ring[i].queue_index = i;
+		adapter->rx_ring[i].reg_idx = i;
+	}
+
+	return 0;
+
+err_rx_ring_allocation:
+	kfree(adapter->tx_ring);
+err_tx_ring_allocation:
+	return -ENOMEM;
+}
+
+/**
+ * ixgbevf_set_interrupt_capability - set MSI-X or FAIL if not supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+static int ixgbevf_set_interrupt_capability(struct ixgbevf_adapter *adapter)
+{
+	int err = 0;
+	int vector, v_budget;
+
+	/*
+	 * It's easy to be greedy for MSI-X vectors, but it really
+	 * doesn't do us much good if we have a lot more vectors
+	 * than CPU's.  So let's be conservative and only ask for
+	 * (roughly) twice the number of vectors as there are CPU's.
+	 */
+	v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
+		       (int)(num_online_cpus() * 2)) + NON_Q_VECTORS;
+
+	/* A failure in MSI-X entry allocation isn't fatal, but it does
+	 * mean we disable MSI-X capabilities of the adapter. */
+	adapter->msix_entries = kcalloc(v_budget,
+					sizeof(struct msix_entry), GFP_KERNEL);
+	if (!adapter->msix_entries) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	for (vector = 0; vector < v_budget; vector++)
+		adapter->msix_entries[vector].entry = vector;
+
+	ixgbevf_acquire_msix_vectors(adapter, v_budget);
+
+out:
+	return err;
+}
+
+/**
+ * ixgbevf_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ixgbevf_alloc_q_vectors(struct ixgbevf_adapter *adapter)
+{
+	int q_idx, num_q_vectors;
+	struct ixgbevf_q_vector *q_vector;
+	int napi_vectors;
+	int (*poll)(struct napi_struct *, int);
+
+	num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	napi_vectors = adapter->num_rx_queues;
+	poll = &ixgbevf_clean_rxonly;
+
+	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+		q_vector = kzalloc(sizeof(struct ixgbevf_q_vector), GFP_KERNEL);
+		if (!q_vector)
+			goto err_out;
+		q_vector->adapter = adapter;
+		q_vector->v_idx = q_idx;
+		q_vector->eitr = adapter->eitr_param;
+		if (q_idx < napi_vectors)
+			netif_napi_add(adapter->netdev, &q_vector->napi,
+				       (*poll), 64);
+		adapter->q_vector[q_idx] = q_vector;
+	}
+
+	return 0;
+
+err_out:
+	while (q_idx) {
+		q_idx--;
+		q_vector = adapter->q_vector[q_idx];
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+		adapter->q_vector[q_idx] = NULL;
+	}
+	return -ENOMEM;
+}
+
+/**
+ * ixgbevf_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbevf_free_q_vectors(struct ixgbevf_adapter *adapter)
+{
+	int q_idx, num_q_vectors;
+	int napi_vectors;
+
+	num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	napi_vectors = adapter->num_rx_queues;
+
+	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+		struct ixgbevf_q_vector *q_vector = adapter->q_vector[q_idx];
+
+		adapter->q_vector[q_idx] = NULL;
+		if (q_idx < napi_vectors)
+			netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+	}
+}
+
+/**
+ * ixgbevf_reset_interrupt_capability - Reset MSIX setup
+ * @adapter: board private structure
+ *
+ **/
+static void ixgbevf_reset_interrupt_capability(struct ixgbevf_adapter *adapter)
+{
+	pci_disable_msix(adapter->pdev);
+	kfree(adapter->msix_entries);
+	adapter->msix_entries = NULL;
+
+	return;
+}
+
+/**
+ * ixgbevf_init_interrupt_scheme - Determine if MSIX is supported and init
+ * @adapter: board private structure to initialize
+ *
+ **/
+static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
+{
+	int err;
+
+	/* Number of supported queues */
+	ixgbevf_set_num_queues(adapter);
+
+	err = ixgbevf_set_interrupt_capability(adapter);
+	if (err) {
+		hw_dbg(&adapter->hw,
+		       "Unable to setup interrupt capabilities\n");
+		goto err_set_interrupt;
+	}
+
+	err = ixgbevf_alloc_q_vectors(adapter);
+	if (err) {
+		hw_dbg(&adapter->hw, "Unable to allocate memory for queue "
+		       "vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	err = ixgbevf_alloc_queues(adapter);
+	if (err) {
+		printk(KERN_ERR "Unable to allocate memory for queues\n");
+		goto err_alloc_queues;
+	}
+
+	hw_dbg(&adapter->hw, "Multiqueue %s: Rx Queue count = %u, "
+	       "Tx Queue count = %u\n",
+	       (adapter->num_rx_queues > 1) ? "Enabled" :
+	       "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+
+	set_bit(__IXGBEVF_DOWN, &adapter->state);
+
+	return 0;
+err_alloc_queues:
+	ixgbevf_free_q_vectors(adapter);
+err_alloc_q_vectors:
+	ixgbevf_reset_interrupt_capability(adapter);
+err_set_interrupt:
+	return err;
+}
+
+/**
+ * ixgbevf_sw_init - Initialize general software structures
+ * (struct ixgbevf_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ixgbevf_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+
+	/* PCI config space info */
+
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_device_id = pdev->subsystem_device;
+
+	hw->mbx.ops.init_params(hw);
+	hw->mac.max_tx_queues = MAX_TX_QUEUES;
+	hw->mac.max_rx_queues = MAX_RX_QUEUES;
+	err = hw->mac.ops.reset_hw(hw);
+	if (err) {
+		dev_info(&pdev->dev,
+		         "PF still in reset state, assigning new address\n");
+		random_ether_addr(hw->mac.addr);
+	} else {
+		err = hw->mac.ops.init_hw(hw);
+		if (err) {
+			printk(KERN_ERR "init_shared_code failed: %d\n", err);
+			goto out;
+		}
+	}
+
+	/* Enable dynamic interrupt throttling rates */
+	adapter->eitr_param = 20000;
+	adapter->itr_setting = 1;
+
+	/* set defaults for eitr in MegaBytes */
+	adapter->eitr_low = 10;
+	adapter->eitr_high = 20;
+
+	/* set default ring sizes */
+	adapter->tx_ring_count = IXGBEVF_DEFAULT_TXD;
+	adapter->rx_ring_count = IXGBEVF_DEFAULT_RXD;
+
+	/* enable rx csum by default */
+	adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+
+	set_bit(__IXGBEVF_DOWN, &adapter->state);
+
+out:
+	return err;
+}
+
+static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	adapter->stats.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
+	adapter->stats.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
+	adapter->stats.last_vfgorc |=
+		(((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
+	adapter->stats.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
+	adapter->stats.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
+	adapter->stats.last_vfgotc |=
+		(((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
+	adapter->stats.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
+
+	adapter->stats.base_vfgprc = adapter->stats.last_vfgprc;
+	adapter->stats.base_vfgorc = adapter->stats.last_vfgorc;
+	adapter->stats.base_vfgptc = adapter->stats.last_vfgptc;
+	adapter->stats.base_vfgotc = adapter->stats.last_vfgotc;
+	adapter->stats.base_vfmprc = adapter->stats.last_vfmprc;
+}
+
+#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter)	\
+	{							\
+		u32 current_counter = IXGBE_READ_REG(hw, reg);	\
+		if (current_counter < last_counter)		\
+			counter += 0x100000000LL;		\
+		last_counter = current_counter;			\
+		counter &= 0xFFFFFFFF00000000LL;		\
+		counter |= current_counter;			\
+	}
+
+#define UPDATE_VF_COUNTER_36bit(reg_lsb, reg_msb, last_counter, counter) \
+	{								 \
+		u64 current_counter_lsb = IXGBE_READ_REG(hw, reg_lsb);	 \
+		u64 current_counter_msb = IXGBE_READ_REG(hw, reg_msb);	 \
+		u64 current_counter = (current_counter_msb << 32) |      \
+			current_counter_lsb;                             \
+		if (current_counter < last_counter)			 \
+			counter += 0x1000000000LL;			 \
+		last_counter = current_counter;				 \
+		counter &= 0xFFFFFFF000000000LL;			 \
+		counter |= current_counter;				 \
+	}
+/**
+ * ixgbevf_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+void ixgbevf_update_stats(struct ixgbevf_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	UPDATE_VF_COUNTER_32bit(IXGBE_VFGPRC, adapter->stats.last_vfgprc,
+				adapter->stats.vfgprc);
+	UPDATE_VF_COUNTER_32bit(IXGBE_VFGPTC, adapter->stats.last_vfgptc,
+				adapter->stats.vfgptc);
+	UPDATE_VF_COUNTER_36bit(IXGBE_VFGORC_LSB, IXGBE_VFGORC_MSB,
+				adapter->stats.last_vfgorc,
+				adapter->stats.vfgorc);
+	UPDATE_VF_COUNTER_36bit(IXGBE_VFGOTC_LSB, IXGBE_VFGOTC_MSB,
+				adapter->stats.last_vfgotc,
+				adapter->stats.vfgotc);
+	UPDATE_VF_COUNTER_32bit(IXGBE_VFMPRC, adapter->stats.last_vfmprc,
+				adapter->stats.vfmprc);
+
+	/* Fill out the OS statistics structure */
+	adapter->net_stats.multicast = adapter->stats.vfmprc -
+		adapter->stats.base_vfmprc;
+}
+
+/**
+ * ixgbevf_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ixgbevf_watchdog(unsigned long data)
+{
+	struct ixgbevf_adapter *adapter = (struct ixgbevf_adapter *)data;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 eics = 0;
+	int i;
+
+	/*
+	 * Do the watchdog outside of interrupt context due to the lovely
+	 * delays that some of the newer hardware requires
+	 */
+
+	if (test_bit(__IXGBEVF_DOWN, &adapter->state))
+		goto watchdog_short_circuit;
+
+	/* get one bit for every active tx/rx interrupt vector */
+	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+		struct ixgbevf_q_vector *qv = adapter->q_vector[i];
+		if (qv->rxr_count || qv->txr_count)
+			eics |= (1 << i);
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_VTEICS, (u32)eics);
+
+watchdog_short_circuit:
+	schedule_work(&adapter->watchdog_task);
+}
+
+/**
+ * ixgbevf_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void ixgbevf_tx_timeout(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	/* Do the reset outside of interrupt context */
+	schedule_work(&adapter->reset_task);
+}
+
+static void ixgbevf_reset_task(struct work_struct *work)
+{
+	struct ixgbevf_adapter *adapter;
+	adapter = container_of(work, struct ixgbevf_adapter, reset_task);
+
+	/* If we're already down or resetting, just bail */
+	if (test_bit(__IXGBEVF_DOWN, &adapter->state) ||
+	    test_bit(__IXGBEVF_RESETTING, &adapter->state))
+		return;
+
+	adapter->tx_timeout_count++;
+
+	ixgbevf_reinit_locked(adapter);
+}
+
+/**
+ * ixgbevf_watchdog_task - worker thread to bring link up
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbevf_watchdog_task(struct work_struct *work)
+{
+	struct ixgbevf_adapter *adapter = container_of(work,
+						       struct ixgbevf_adapter,
+						       watchdog_task);
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 link_speed = adapter->link_speed;
+	bool link_up = adapter->link_up;
+
+	adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
+
+	/*
+	 * Always check the link on the watchdog because we have
+	 * no LSC interrupt
+	 */
+	if (hw->mac.ops.check_link) {
+		if ((hw->mac.ops.check_link(hw, &link_speed,
+					    &link_up, false)) != 0) {
+			adapter->link_up = link_up;
+			adapter->link_speed = link_speed;
+			schedule_work(&adapter->reset_task);
+			goto pf_has_reset;
+		}
+	} else {
+		/* always assume link is up, if no check link
+		 * function */
+		link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+		link_up = true;
+	}
+	adapter->link_up = link_up;
+	adapter->link_speed = link_speed;
+
+	if (link_up) {
+		if (!netif_carrier_ok(netdev)) {
+			hw_dbg(&adapter->hw, "NIC Link is Up %s, ",
+			       ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+				"10 Gbps" : "1 Gbps"));
+			netif_carrier_on(netdev);
+			netif_tx_wake_all_queues(netdev);
+		} else {
+			/* Force detection of hung controller */
+			adapter->detect_tx_hung = true;
+		}
+	} else {
+		adapter->link_up = false;
+		adapter->link_speed = 0;
+		if (netif_carrier_ok(netdev)) {
+			hw_dbg(&adapter->hw, "NIC Link is Down\n");
+			netif_carrier_off(netdev);
+			netif_tx_stop_all_queues(netdev);
+		}
+	}
+
+pf_has_reset:
+	ixgbevf_update_stats(adapter);
+
+	/* Force detection of hung controller every watchdog period */
+	adapter->detect_tx_hung = true;
+
+	/* Reset the timer */
+	if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+		mod_timer(&adapter->watchdog_timer,
+			  round_jiffies(jiffies + (2 * HZ)));
+
+	adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
+}
+
+/**
+ * ixgbevf_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void ixgbevf_free_tx_resources(struct ixgbevf_adapter *adapter,
+			       struct ixgbevf_ring *tx_ring)
+{
+	struct pci_dev *pdev = adapter->pdev;
+
+
+	ixgbevf_clean_tx_ring(adapter, tx_ring);
+
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+
+	pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+	tx_ring->desc = NULL;
+}
+
+/**
+ * ixgbevf_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void ixgbevf_free_all_tx_resources(struct ixgbevf_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		if (adapter->tx_ring[i].desc)
+			ixgbevf_free_tx_resources(adapter,
+						  &adapter->tx_ring[i]);
+
+}
+
+/**
+ * ixgbevf_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @tx_ring:    tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *adapter,
+			       struct ixgbevf_ring *tx_ring)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int size;
+
+	size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
+	tx_ring->tx_buffer_info = vmalloc(size);
+	if (!tx_ring->tx_buffer_info)
+		goto err;
+	memset(tx_ring->tx_buffer_info, 0, size);
+
+	/* round up to nearest 4K */
+	tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+	tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+					     &tx_ring->dma);
+	if (!tx_ring->desc)
+		goto err;
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+	tx_ring->work_limit = tx_ring->count;
+	return 0;
+
+err:
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+	hw_dbg(&adapter->hw, "Unable to allocate memory for the transmit "
+	       "descriptor ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * ixgbevf_setup_all_tx_resources - allocate all queues Tx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not).  It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbevf_setup_all_tx_resources(struct ixgbevf_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		err = ixgbevf_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+		if (!err)
+			continue;
+		hw_dbg(&adapter->hw,
+		       "Allocation for Tx Queue %u failed\n", i);
+		break;
+	}
+
+	return err;
+}
+
+/**
+ * ixgbevf_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rx_ring:    rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *adapter,
+			       struct ixgbevf_ring *rx_ring)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int size;
+
+	size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
+	rx_ring->rx_buffer_info = vmalloc(size);
+	if (!rx_ring->rx_buffer_info) {
+		hw_dbg(&adapter->hw,
+		       "Unable to vmalloc buffer memory for "
+		       "the receive descriptor ring\n");
+		goto alloc_failed;
+	}
+	memset(rx_ring->rx_buffer_info, 0, size);
+
+	/* Round up to nearest 4K */
+	rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+	rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
+					     &rx_ring->dma);
+
+	if (!rx_ring->desc) {
+		hw_dbg(&adapter->hw,
+		       "Unable to allocate memory for "
+		       "the receive descriptor ring\n");
+		vfree(rx_ring->rx_buffer_info);
+		rx_ring->rx_buffer_info = NULL;
+		goto alloc_failed;
+	}
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+
+	return 0;
+alloc_failed:
+	return -ENOMEM;
+}
+
+/**
+ * ixgbevf_setup_all_rx_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not).  It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbevf_setup_all_rx_resources(struct ixgbevf_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		err = ixgbevf_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+		if (!err)
+			continue;
+		hw_dbg(&adapter->hw,
+		       "Allocation for Rx Queue %u failed\n", i);
+		break;
+	}
+	return err;
+}
+
+/**
+ * ixgbevf_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void ixgbevf_free_rx_resources(struct ixgbevf_adapter *adapter,
+			       struct ixgbevf_ring *rx_ring)
+{
+	struct pci_dev *pdev = adapter->pdev;
+
+	ixgbevf_clean_rx_ring(adapter, rx_ring);
+
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+
+	pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+	rx_ring->desc = NULL;
+}
+
+/**
+ * ixgbevf_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void ixgbevf_free_all_rx_resources(struct ixgbevf_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		if (adapter->rx_ring[i].desc)
+			ixgbevf_free_rx_resources(adapter,
+						  &adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbevf_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int ixgbevf_open(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	int err;
+
+	/* disallow open during test */
+	if (test_bit(__IXGBEVF_TESTING, &adapter->state))
+		return -EBUSY;
+
+	if (hw->adapter_stopped) {
+		ixgbevf_reset(adapter);
+		/* if adapter is still stopped then PF isn't up and
+		 * the vf can't start. */
+		if (hw->adapter_stopped) {
+			err = IXGBE_ERR_MBX;
+			printk(KERN_ERR "Unable to start - perhaps the PF"
+			       "Driver isn't up yet\n");
+			goto err_setup_reset;
+		}
+	}
+
+	/* allocate transmit descriptors */
+	err = ixgbevf_setup_all_tx_resources(adapter);
+	if (err)
+		goto err_setup_tx;
+
+	/* allocate receive descriptors */
+	err = ixgbevf_setup_all_rx_resources(adapter);
+	if (err)
+		goto err_setup_rx;
+
+	ixgbevf_configure(adapter);
+
+	/*
+	 * Map the Tx/Rx rings to the vectors we were allotted.
+	 * if request_irq will be called in this function map_rings
+	 * must be called *before* up_complete
+	 */
+	ixgbevf_map_rings_to_vectors(adapter);
+
+	err = ixgbevf_up_complete(adapter);
+	if (err)
+		goto err_up;
+
+	/* clear any pending interrupts, may auto mask */
+	IXGBE_READ_REG(hw, IXGBE_VTEICR);
+	err = ixgbevf_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
+	ixgbevf_irq_enable(adapter, true, true);
+
+	return 0;
+
+err_req_irq:
+	ixgbevf_down(adapter);
+err_up:
+	ixgbevf_free_irq(adapter);
+err_setup_rx:
+	ixgbevf_free_all_rx_resources(adapter);
+err_setup_tx:
+	ixgbevf_free_all_tx_resources(adapter);
+	ixgbevf_reset(adapter);
+
+err_setup_reset:
+
+	return err;
+}
+
+/**
+ * ixgbevf_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int ixgbevf_close(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	ixgbevf_down(adapter);
+	ixgbevf_free_irq(adapter);
+
+	ixgbevf_free_all_tx_resources(adapter);
+	ixgbevf_free_all_rx_resources(adapter);
+
+	return 0;
+}
+
+static int ixgbevf_tso(struct ixgbevf_adapter *adapter,
+		       struct ixgbevf_ring *tx_ring,
+		       struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
+{
+	struct ixgbe_adv_tx_context_desc *context_desc;
+	unsigned int i;
+	int err;
+	struct ixgbevf_tx_buffer *tx_buffer_info;
+	u32 vlan_macip_lens = 0, type_tucmd_mlhl;
+	u32 mss_l4len_idx, l4len;
+
+	if (skb_is_gso(skb)) {
+		if (skb_header_cloned(skb)) {
+			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+			if (err)
+				return err;
+		}
+		l4len = tcp_hdrlen(skb);
+		*hdr_len += l4len;
+
+		if (skb->protocol == htons(ETH_P_IP)) {
+			struct iphdr *iph = ip_hdr(skb);
+			iph->tot_len = 0;
+			iph->check = 0;
+			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+								 iph->daddr, 0,
+								 IPPROTO_TCP,
+								 0);
+			adapter->hw_tso_ctxt++;
+		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+			ipv6_hdr(skb)->payload_len = 0;
+			tcp_hdr(skb)->check =
+			    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+					     &ipv6_hdr(skb)->daddr,
+					     0, IPPROTO_TCP, 0);
+			adapter->hw_tso6_ctxt++;
+		}
+
+		i = tx_ring->next_to_use;
+
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
+
+		/* VLAN MACLEN IPLEN */
+		if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+			vlan_macip_lens |=
+				(tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
+		vlan_macip_lens |= ((skb_network_offset(skb)) <<
+				    IXGBE_ADVTXD_MACLEN_SHIFT);
+		*hdr_len += skb_network_offset(skb);
+		vlan_macip_lens |=
+			(skb_transport_header(skb) - skb_network_header(skb));
+		*hdr_len +=
+			(skb_transport_header(skb) - skb_network_header(skb));
+		context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+		context_desc->seqnum_seed = 0;
+
+		/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+		type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
+				    IXGBE_ADVTXD_DTYP_CTXT);
+
+		if (skb->protocol == htons(ETH_P_IP))
+			type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+		type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+		context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
+
+		/* MSS L4LEN IDX */
+		mss_l4len_idx =
+			(skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT);
+		mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT);
+		/* use index 1 for TSO */
+		mss_l4len_idx |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+		context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+
+		tx_buffer_info->time_stamp = jiffies;
+		tx_buffer_info->next_to_watch = i;
+
+		i++;
+		if (i == tx_ring->count)
+			i = 0;
+		tx_ring->next_to_use = i;
+
+		return true;
+	}
+
+	return false;
+}
+
+static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
+			    struct ixgbevf_ring *tx_ring,
+			    struct sk_buff *skb, u32 tx_flags)
+{
+	struct ixgbe_adv_tx_context_desc *context_desc;
+	unsigned int i;
+	struct ixgbevf_tx_buffer *tx_buffer_info;
+	u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL ||
+	    (tx_flags & IXGBE_TX_FLAGS_VLAN)) {
+		i = tx_ring->next_to_use;
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
+
+		if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+			vlan_macip_lens |= (tx_flags &
+					    IXGBE_TX_FLAGS_VLAN_MASK);
+		vlan_macip_lens |= (skb_network_offset(skb) <<
+				    IXGBE_ADVTXD_MACLEN_SHIFT);
+		if (skb->ip_summed == CHECKSUM_PARTIAL)
+			vlan_macip_lens |= (skb_transport_header(skb) -
+					    skb_network_header(skb));
+
+		context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+		context_desc->seqnum_seed = 0;
+
+		type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT |
+				    IXGBE_ADVTXD_DTYP_CTXT);
+
+		if (skb->ip_summed == CHECKSUM_PARTIAL) {
+			switch (skb->protocol) {
+			case __constant_htons(ETH_P_IP):
+				type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+					type_tucmd_mlhl |=
+					    IXGBE_ADVTXD_TUCMD_L4T_TCP;
+				break;
+			case __constant_htons(ETH_P_IPV6):
+				/* XXX what about other V6 headers?? */
+				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+					type_tucmd_mlhl |=
+						IXGBE_ADVTXD_TUCMD_L4T_TCP;
+				break;
+			default:
+				if (unlikely(net_ratelimit())) {
+					printk(KERN_WARNING
+					       "partial checksum but "
+					       "proto=%x!\n",
+					       skb->protocol);
+				}
+				break;
+			}
+		}
+
+		context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
+		/* use index zero for tx checksum offload */
+		context_desc->mss_l4len_idx = 0;
+
+		tx_buffer_info->time_stamp = jiffies;
+		tx_buffer_info->next_to_watch = i;
+
+		adapter->hw_csum_tx_good++;
+		i++;
+		if (i == tx_ring->count)
+			i = 0;
+		tx_ring->next_to_use = i;
+
+		return true;
+	}
+
+	return false;
+}
+
+static int ixgbevf_tx_map(struct ixgbevf_adapter *adapter,
+			  struct ixgbevf_ring *tx_ring,
+			  struct sk_buff *skb, u32 tx_flags,
+			  unsigned int first)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct ixgbevf_tx_buffer *tx_buffer_info;
+	unsigned int len;
+	unsigned int total = skb->len;
+	unsigned int offset = 0, size, count = 0, i;
+	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+	unsigned int f;
+
+	i = tx_ring->next_to_use;
+
+	len = min(skb_headlen(skb), total);
+	while (len) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
+
+		tx_buffer_info->length = size;
+		tx_buffer_info->mapped_as_page = false;
+		tx_buffer_info->dma = pci_map_single(adapter->pdev,
+						     skb->data + offset,
+						     size, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, tx_buffer_info->dma))
+			goto dma_error;
+		tx_buffer_info->time_stamp = jiffies;
+		tx_buffer_info->next_to_watch = i;
+
+		len -= size;
+		total -= size;
+		offset += size;
+		count++;
+		i++;
+		if (i == tx_ring->count)
+			i = 0;
+	}
+
+	for (f = 0; f < nr_frags; f++) {
+		struct skb_frag_struct *frag;
+
+		frag = &skb_shinfo(skb)->frags[f];
+		len = min((unsigned int)frag->size, total);
+		offset = frag->page_offset;
+
+		while (len) {
+			tx_buffer_info = &tx_ring->tx_buffer_info[i];
+			size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
+
+			tx_buffer_info->length = size;
+			tx_buffer_info->dma = pci_map_page(adapter->pdev,
+							   frag->page,
+							   offset,
+							   size,
+							   PCI_DMA_TODEVICE);
+			tx_buffer_info->mapped_as_page = true;
+			if (pci_dma_mapping_error(pdev, tx_buffer_info->dma))
+				goto dma_error;
+			tx_buffer_info->time_stamp = jiffies;
+			tx_buffer_info->next_to_watch = i;
+
+			len -= size;
+			total -= size;
+			offset += size;
+			count++;
+			i++;
+			if (i == tx_ring->count)
+				i = 0;
+		}
+		if (total == 0)
+			break;
+	}
+
+	if (i == 0)
+		i = tx_ring->count - 1;
+	else
+		i = i - 1;
+	tx_ring->tx_buffer_info[i].skb = skb;
+	tx_ring->tx_buffer_info[first].next_to_watch = i;
+
+	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+
+	/* clear timestamp and dma mappings for failed tx_buffer_info map */
+	tx_buffer_info->dma = 0;
+	tx_buffer_info->time_stamp = 0;
+	tx_buffer_info->next_to_watch = 0;
+	count--;
+
+	/* clear timestamp and dma mappings for remaining portion of packet */
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		ixgbevf_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+	}
+
+	return count;
+}
+
+static void ixgbevf_tx_queue(struct ixgbevf_adapter *adapter,
+			     struct ixgbevf_ring *tx_ring, int tx_flags,
+			     int count, u32 paylen, u8 hdr_len)
+{
+	union ixgbe_adv_tx_desc *tx_desc = NULL;
+	struct ixgbevf_tx_buffer *tx_buffer_info;
+	u32 olinfo_status = 0, cmd_type_len = 0;
+	unsigned int i;
+
+	u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
+
+	cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
+
+	cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
+
+	if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+		cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
+
+	if (tx_flags & IXGBE_TX_FLAGS_TSO) {
+		cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+
+		olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
+			IXGBE_ADVTXD_POPTS_SHIFT;
+
+		/* use index 1 context for tso */
+		olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+		if (tx_flags & IXGBE_TX_FLAGS_IPV4)
+			olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
+				IXGBE_ADVTXD_POPTS_SHIFT;
+
+	} else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
+		olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
+			IXGBE_ADVTXD_POPTS_SHIFT;
+
+	olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
+
+	i = tx_ring->next_to_use;
+	while (count--) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
+		tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
+		tx_desc->read.cmd_type_len =
+			cpu_to_le32(cmd_type_len | tx_buffer_info->length);
+		tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+		i++;
+		if (i == tx_ring->count)
+			i = 0;
+	}
+
+	tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
+
+	/*
+	 * Force memory writes to complete before letting h/w
+	 * know there are new descriptors to fetch.  (Only
+	 * applicable for weak-ordered memory model archs,
+	 * such as IA-64).
+	 */
+	wmb();
+
+	tx_ring->next_to_use = i;
+	writel(i, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+static int __ixgbevf_maybe_stop_tx(struct net_device *netdev,
+				   struct ixgbevf_ring *tx_ring, int size)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	netif_stop_subqueue(netdev, tx_ring->queue_index);
+	/* Herbert's original patch had:
+	 *  smp_mb__after_netif_stop_queue();
+	 * but since that doesn't exist yet, just open code it. */
+	smp_mb();
+
+	/* We need to check again in a case another CPU has just
+	 * made room available. */
+	if (likely(IXGBE_DESC_UNUSED(tx_ring) < size))
+		return -EBUSY;
+
+	/* A reprieve! - use start_queue because it doesn't call schedule */
+	netif_start_subqueue(netdev, tx_ring->queue_index);
+	++adapter->restart_queue;
+	return 0;
+}
+
+static int ixgbevf_maybe_stop_tx(struct net_device *netdev,
+				 struct ixgbevf_ring *tx_ring, int size)
+{
+	if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size))
+		return 0;
+	return __ixgbevf_maybe_stop_tx(netdev, tx_ring, size);
+}
+
+static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbevf_ring *tx_ring;
+	unsigned int first;
+	unsigned int tx_flags = 0;
+	u8 hdr_len = 0;
+	int r_idx = 0, tso;
+	int count = 0;
+
+	unsigned int f;
+
+	tx_ring = &adapter->tx_ring[r_idx];
+
+	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
+		tx_flags |= vlan_tx_tag_get(skb);
+		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= IXGBE_TX_FLAGS_VLAN;
+	}
+
+	/* four things can cause us to need a context descriptor */
+	if (skb_is_gso(skb) ||
+	    (skb->ip_summed == CHECKSUM_PARTIAL) ||
+	    (tx_flags & IXGBE_TX_FLAGS_VLAN))
+		count++;
+
+	count += TXD_USE_COUNT(skb_headlen(skb));
+	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+		count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+
+	if (ixgbevf_maybe_stop_tx(netdev, tx_ring, count)) {
+		adapter->tx_busy++;
+		return NETDEV_TX_BUSY;
+	}
+
+	first = tx_ring->next_to_use;
+
+	if (skb->protocol == htons(ETH_P_IP))
+		tx_flags |= IXGBE_TX_FLAGS_IPV4;
+	tso = ixgbevf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+	if (tso < 0) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (tso)
+		tx_flags |= IXGBE_TX_FLAGS_TSO;
+	else if (ixgbevf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+		 (skb->ip_summed == CHECKSUM_PARTIAL))
+		tx_flags |= IXGBE_TX_FLAGS_CSUM;
+
+	ixgbevf_tx_queue(adapter, tx_ring, tx_flags,
+			 ixgbevf_tx_map(adapter, tx_ring, skb, tx_flags, first),
+			 skb->len, hdr_len);
+
+	netdev->trans_start = jiffies;
+
+	ixgbevf_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * ixgbevf_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+static struct net_device_stats *ixgbevf_get_stats(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	/* only return the current stats */
+	return &adapter->net_stats;
+}
+
+/**
+ * ixgbevf_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbevf_set_mac(struct net_device *netdev, void *p)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+	if (hw->mac.ops.set_rar)
+		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
+
+	return 0;
+}
+
+/**
+ * ixgbevf_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+	/* MTU < 68 is an error and causes problems on some kernels */
+	if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE))
+		return -EINVAL;
+
+	hw_dbg(&adapter->hw, "changing MTU from %d to %d\n",
+	       netdev->mtu, new_mtu);
+	/* must set new MTU before calling down or up */
+	netdev->mtu = new_mtu;
+
+	if (netif_running(netdev))
+		ixgbevf_reinit_locked(adapter);
+
+	return 0;
+}
+
+static void ixgbevf_shutdown(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev)) {
+		ixgbevf_down(adapter);
+		ixgbevf_free_irq(adapter);
+		ixgbevf_free_all_tx_resources(adapter);
+		ixgbevf_free_all_rx_resources(adapter);
+	}
+
+#ifdef CONFIG_PM
+	pci_save_state(pdev);
+#endif
+
+	pci_disable_device(pdev);
+}
+
+#ifdef HAVE_NET_DEVICE_OPS
+static const struct net_device_ops ixgbe_netdev_ops = {
+	.ndo_open		= &ixgbevf_open,
+	.ndo_stop		= &ixgbevf_close,
+	.ndo_start_xmit		= &ixgbevf_xmit_frame,
+	.ndo_get_stats		= &ixgbevf_get_stats,
+	.ndo_set_rx_mode	= &ixgbevf_set_rx_mode,
+	.ndo_set_multicast_list	= &ixgbevf_set_rx_mode,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= &ixgbevf_set_mac,
+	.ndo_change_mtu		= &ixgbevf_change_mtu,
+	.ndo_tx_timeout		= &ixgbevf_tx_timeout,
+	.ndo_vlan_rx_register	= &ixgbevf_vlan_rx_register,
+	.ndo_vlan_rx_add_vid	= &ixgbevf_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= &ixgbevf_vlan_rx_kill_vid,
+};
+#endif /* HAVE_NET_DEVICE_OPS */
+
+static void ixgbevf_assign_netdev_ops(struct net_device *dev)
+{
+	struct ixgbevf_adapter *adapter;
+	adapter = netdev_priv(dev);
+#ifdef HAVE_NET_DEVICE_OPS
+	dev->netdev_ops = &ixgbe_netdev_ops;
+#else /* HAVE_NET_DEVICE_OPS */
+	dev->open = &ixgbevf_open;
+	dev->stop = &ixgbevf_close;
+
+	dev->hard_start_xmit = &ixgbevf_xmit_frame;
+
+	dev->get_stats = &ixgbevf_get_stats;
+	dev->set_multicast_list = &ixgbevf_set_rx_mode;
+	dev->set_mac_address = &ixgbevf_set_mac;
+	dev->change_mtu = &ixgbevf_change_mtu;
+	dev->tx_timeout = &ixgbevf_tx_timeout;
+	dev->vlan_rx_register = &ixgbevf_vlan_rx_register;
+	dev->vlan_rx_add_vid = &ixgbevf_vlan_rx_add_vid;
+	dev->vlan_rx_kill_vid = &ixgbevf_vlan_rx_kill_vid;
+#endif /* HAVE_NET_DEVICE_OPS */
+	ixgbevf_set_ethtool_ops(dev);
+	dev->watchdog_timeo = 5 * HZ;
+}
+
+/**
+ * ixgbevf_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ixgbevf_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ixgbevf_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit ixgbevf_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	struct net_device *netdev;
+	struct ixgbevf_adapter *adapter = NULL;
+	struct ixgbe_hw *hw = NULL;
+	const struct ixgbevf_info *ii = ixgbevf_info_tbl[ent->driver_data];
+	static int cards_found;
+	int err, pci_using_dac;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+	    !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		pci_using_dac = 1;
+	} else {
+		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (err) {
+			err = pci_set_consistent_dma_mask(pdev,
+							  DMA_BIT_MASK(32));
+			if (err) {
+				dev_err(&pdev->dev, "No usable DMA "
+					"configuration, aborting\n");
+				goto err_dma;
+			}
+		}
+		pci_using_dac = 0;
+	}
+
+	err = pci_request_regions(pdev, ixgbevf_driver_name);
+	if (err) {
+		dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err);
+		goto err_pci_reg;
+	}
+
+	pci_set_master(pdev);
+
+#ifdef HAVE_TX_MQ
+	netdev = alloc_etherdev_mq(sizeof(struct ixgbevf_adapter),
+				   MAX_TX_QUEUES);
+#else
+	netdev = alloc_etherdev(sizeof(struct ixgbevf_adapter));
+#endif
+	if (!netdev) {
+		err = -ENOMEM;
+		goto err_alloc_etherdev;
+	}
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	pci_set_drvdata(pdev, netdev);
+	adapter = netdev_priv(netdev);
+
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	hw = &adapter->hw;
+	hw->back = adapter;
+	adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+
+	/*
+	 * call save state here in standalone driver because it relies on
+	 * adapter struct to exist, and needs to call netdev_priv
+	 */
+	pci_save_state(pdev);
+
+	hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
+			      pci_resource_len(pdev, 0));
+	if (!hw->hw_addr) {
+		err = -EIO;
+		goto err_ioremap;
+	}
+
+	ixgbevf_assign_netdev_ops(netdev);
+
+	adapter->bd_number = cards_found;
+
+	/* Setup hw api */
+	memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
+	hw->mac.type  = ii->mac;
+
+	memcpy(&hw->mbx.ops, &ixgbevf_mbx_ops,
+	       sizeof(struct ixgbe_mac_operations));
+
+	adapter->flags &= ~IXGBE_FLAG_RX_PS_CAPABLE;
+	adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+	adapter->flags |= IXGBE_FLAG_RX_1BUF_CAPABLE;
+
+	/* setup the private structure */
+	err = ixgbevf_sw_init(adapter);
+
+	ixgbevf_init_last_counter_stats(adapter);
+
+#ifdef MAX_SKB_FRAGS
+	netdev->features = NETIF_F_SG |
+			   NETIF_F_IP_CSUM |
+			   NETIF_F_HW_VLAN_TX |
+			   NETIF_F_HW_VLAN_RX |
+			   NETIF_F_HW_VLAN_FILTER;
+
+	netdev->features |= NETIF_F_IPV6_CSUM;
+	netdev->features |= NETIF_F_TSO;
+	netdev->features |= NETIF_F_TSO6;
+	netdev->vlan_features |= NETIF_F_TSO;
+	netdev->vlan_features |= NETIF_F_TSO6;
+	netdev->vlan_features |= NETIF_F_IP_CSUM;
+	netdev->vlan_features |= NETIF_F_SG;
+
+	if (pci_using_dac)
+		netdev->features |= NETIF_F_HIGHDMA;
+
+#endif /* MAX_SKB_FRAGS */
+
+	/* The HW MAC address was set and/or determined in sw_init */
+	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+		printk(KERN_ERR "invalid MAC address\n");
+		err = -EIO;
+		goto err_sw_init;
+	}
+
+	init_timer(&adapter->watchdog_timer);
+	adapter->watchdog_timer.function = &ixgbevf_watchdog;
+	adapter->watchdog_timer.data = (unsigned long)adapter;
+
+	INIT_WORK(&adapter->reset_task, ixgbevf_reset_task);
+	INIT_WORK(&adapter->watchdog_task, ixgbevf_watchdog_task);
+
+	err = ixgbevf_init_interrupt_scheme(adapter);
+	if (err)
+		goto err_sw_init;
+
+	/* pick up the PCI bus settings for reporting later */
+	if (hw->mac.ops.get_bus_info)
+		hw->mac.ops.get_bus_info(hw);
+
+
+	netif_carrier_off(netdev);
+	netif_tx_stop_all_queues(netdev);
+
+	strcpy(netdev->name, "eth%d");
+
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	adapter->netdev_registered = true;
+
+	/* print the MAC address */
+	hw_dbg(hw, "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+	       netdev->dev_addr[0],
+	       netdev->dev_addr[1],
+	       netdev->dev_addr[2],
+	       netdev->dev_addr[3],
+	       netdev->dev_addr[4],
+	       netdev->dev_addr[5]);
+
+	hw_dbg(hw, "MAC: %d\n", hw->mac.type);
+
+	hw_dbg(hw, "LRO is disabled \n");
+
+	hw_dbg(hw, "Intel(R) 82599 Virtual Function\n");
+	cards_found++;
+	return 0;
+
+err_register:
+err_sw_init:
+	ixgbevf_reset_interrupt_capability(adapter);
+	iounmap(hw->hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * ixgbevf_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ixgbevf_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit ixgbevf_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+	set_bit(__IXGBEVF_DOWN, &adapter->state);
+
+	del_timer_sync(&adapter->watchdog_timer);
+
+	cancel_work_sync(&adapter->watchdog_task);
+
+	flush_scheduled_work();
+
+	if (adapter->netdev_registered) {
+		unregister_netdev(netdev);
+		adapter->netdev_registered = false;
+	}
+
+	ixgbevf_reset_interrupt_capability(adapter);
+
+	iounmap(adapter->hw.hw_addr);
+	pci_release_regions(pdev);
+
+	hw_dbg(&adapter->hw, "Remove complete\n");
+
+	kfree(adapter->tx_ring);
+	kfree(adapter->rx_ring);
+
+	free_netdev(netdev);
+
+	pci_disable_device(pdev);
+}
+
+static struct pci_driver ixgbevf_driver = {
+	.name     = ixgbevf_driver_name,
+	.id_table = ixgbevf_pci_tbl,
+	.probe    = ixgbevf_probe,
+	.remove   = __devexit_p(ixgbevf_remove),
+	.shutdown = ixgbevf_shutdown,
+};
+
+/**
+ * ixgbe_init_module - Driver Registration Routine
+ *
+ * ixgbe_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init ixgbevf_init_module(void)
+{
+	int ret;
+	printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
+	       ixgbevf_driver_version);
+
+	printk(KERN_INFO "%s\n", ixgbevf_copyright);
+
+	ret = pci_register_driver(&ixgbevf_driver);
+	return ret;
+}
+
+module_init(ixgbevf_init_module);
+
+/**
+ * ixgbe_exit_module - Driver Exit Cleanup Routine
+ *
+ * ixgbe_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit ixgbevf_exit_module(void)
+{
+	pci_unregister_driver(&ixgbevf_driver);
+}
+
+#ifdef DEBUG
+/**
+ * ixgbe_get_hw_dev_name - return device name string
+ * used by hardware layer to print debugging information
+ **/
+char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw)
+{
+	struct ixgbevf_adapter *adapter = hw->back;
+	return adapter->netdev->name;
+}
+
+#endif
+module_exit(ixgbevf_exit_module);
+
+/* ixgbevf_main.c */
-- 
cgit v1.2.3


From 0d3592fa28965a3083d670b430bb59c19efb6abe Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:24:31 +0000
Subject: ixgbevf: Driver Makefile

82599 Virtual Function Device Driver Makefile

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/Makefile | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 drivers/net/ixgbevf/Makefile

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/Makefile b/drivers/net/ixgbevf/Makefile
new file mode 100644
index 000000000000..dd4e0d27e8cc
--- /dev/null
+++ b/drivers/net/ixgbevf/Makefile
@@ -0,0 +1,38 @@
+################################################################################
+#
+# Intel 82599 Virtual Function driver
+# Copyright(c) 1999 - 2009 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82599 VF ethernet driver
+#
+
+obj-$(CONFIG_IXGBEVF) += ixgbevf.o
+
+ixgbevf-objs := vf.o \
+                mbx.o \
+                ethtool.o \
+                ixgbevf_main.o
+
-- 
cgit v1.2.3


From ecc6703cbb2bb648c7345c652a704f7af56322b8 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:24:50 +0000
Subject: ixgbevf: Kconfig, Makefile and Documentation

Modifications for the Kconfig and network device Makefile to add the ixgbevf
driver module to the kernel plus basic driver documentation.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/ixgbevf.txt | 90 ++++++++++++++++++++++++++++++++++++
 drivers/net/Kconfig                  | 22 +++++++++
 drivers/net/Makefile                 |  1 +
 3 files changed, 113 insertions(+)
 create mode 100755 Documentation/networking/ixgbevf.txt

(limited to 'drivers/net')

diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
new file mode 100755
index 000000000000..19015de6725f
--- /dev/null
+++ b/Documentation/networking/ixgbevf.txt
@@ -0,0 +1,90 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+November 24, 2009
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Known Issues/Troubleshooting
+- Support
+
+In This Release
+===============
+
+This file describes the ixgbevf Linux* Base Driver for Intel Network
+Connection.
+
+The ixgbevf driver supports 82599-based virtual function devices that can only
+be activated on kernels with CONFIG_PCI_IOV enabled.
+
+The ixgbevf driver supports virtual functions generated by the ixgbe driver
+with a max_vfs value of 1 or greater.
+
+The guest OS loading the ixgbevf driver must support MSI-X interrupts.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/network/sb/CS-008441.htm
+
+Known Issues/Troubleshooting
+============================
+
+  Unloading Physical Function (PF) Driver Causes System Reboots When VM is
+  Running and VF is Loaded on the VM
+  ------------------------------------------------------------------------
+  Do not unload the PF driver (ixgbe) while VFs are assigned to guests.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
+
+License
+=======
+
+Intel 10 Gigabit Linux driver.
+Copyright(c) 1999 - 2009 Intel Corporation.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms and conditions of the GNU General Public License,
+version 2, as published by the Free Software Foundation.
+
+This program is distributed in the hope it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+The full GNU General Public License is included in this distribution in
+the file called "COPYING".
+
+Trademarks
+==========
+
+Intel, Itanium, and Pentium are trademarks or registered trademarks of
+Intel Corporation or its subsidiaries in the United States and other
+countries.
+
+* Other names and brands may be claimed as the property of others.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dd9a09c72dff..5be6a2376f4f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2618,6 +2618,28 @@ config IXGBE_DCB
 
 	  If unsure, say N.
 
+config IXGBEVF
+       tristate "Intel(R) 82599 Virtual Function Ethernet support"
+       depends on PCI_MSI
+       ---help---
+         This driver supports Intel(R) 82599 virtual functions.  For more
+         information on how to identify your adapter, go to the Adapter &
+         Driver ID Guide at:
+
+         <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+         For general information and support, go to the Intel support
+         website at:
+
+         <http://support.intel.com>
+
+         More specific information on configuring the driver is in
+         <file:Documentation/networking/ixgbevf.txt>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called ixgbevf.  MSI-X interrupt support is required
+         for this driver to work correctly.
+
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ad1346dd9da9..6746e8b8bdfc 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
 obj-$(CONFIG_IGB) += igb/
 obj-$(CONFIG_IGBVF) += igbvf/
 obj-$(CONFIG_IXGBE) += ixgbe/
+obj-$(CONFIG_IXGBEVF) += ixgbevf/
 obj-$(CONFIG_IXGB) += ixgb/
 obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CHELSIO_T1) += chelsio/
-- 
cgit v1.2.3


From 10ca132c41ecc1b55bc22667493ab75c4f6eec0d Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:25:10 +0000
Subject: ixgbe: Mailbox header and code module

The 82599 virtual function device and the master 82599 physical function
device implement a mailbox utility for communication between the devices
using some SRAM scratch memory and a doorbell/answering mechanism enabled
via interrupt and/or polling.  This C module and accompanying header
file implement the base functions for use of this feature.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_mbx.c | 479 ++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbe/ixgbe_mbx.h |  96 +++++++++
 2 files changed, 575 insertions(+)
 create mode 100644 drivers/net/ixgbe/ixgbe_mbx.c
 create mode 100644 drivers/net/ixgbe/ixgbe_mbx.h

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c
new file mode 100644
index 000000000000..d75f9148eb1f
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_mbx.c
@@ -0,0 +1,479 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_mbx.h"
+
+/**
+ *  ixgbe_read_mbx - Reads a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfuly read message from buffer
+ **/
+s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	/* limit read to size of mailbox */
+	if (size > mbx->size)
+		size = mbx->size;
+
+	if (mbx->ops.read)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_mbx - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = 0;
+
+	if (size > mbx->size)
+		ret_val = IXGBE_ERR_MBX;
+
+	else if (mbx->ops.write)
+		ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_msg - checks to see if someone sent us mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (mbx->ops.check_for_msg)
+		ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_ack - checks to see if someone sent us ACK
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (mbx->ops.check_for_ack)
+		ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_rst - checks to see if other side has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (mbx->ops.check_for_rst)
+		ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_msg)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		udelay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_ack)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			break;
+		udelay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (!mbx->ops.read)
+		goto out;
+
+	ret_val = ixgbe_poll_for_msg(hw, mbx_id);
+
+	/* if ack received read message, otherwise we timed out */
+	if (!ret_val)
+		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+                           u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
+		goto out;
+
+	/* send msg */
+	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+	/* if msg sent wait until we receive an ack */
+	if (!ret_val)
+		ret_val = ixgbe_poll_for_ack(hw, mbx_id);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_mbx_ops_generic - Initialize MB function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Setup the mailbox read and write message function pointers
+ **/
+void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	mbx->ops.read_posted = ixgbe_read_posted_mbx;
+	mbx->ops.write_posted = ixgbe_write_posted_mbx;
+}
+
+static s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
+{
+	u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index));
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (mbvficr & mask) {
+		ret_val = 0;
+		IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+	s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+	u32 vf_bit = vf_number % 16;
+
+	if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit,
+	                            index)) {
+		ret_val = 0;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+	s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+	u32 vf_bit = vf_number % 16;
+
+	if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit,
+	                            index)) {
+		ret_val = 0;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_check_for_rst_pf - checks to see if the VF has reset
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	u32 reg_offset = (vf_number < 32) ? 0 : 1;
+	u32 vf_shift = vf_number % 32;
+	u32 vflre = 0;
+	s32 ret_val = IXGBE_ERR_MBX;
+
+	if (hw->mac.type == ixgbe_mac_82599EB)
+		vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
+
+	if (vflre & (1 << vf_shift)) {
+		ret_val = 0;
+		IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift));
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 ret_val = IXGBE_ERR_MBX;
+	u32 p2v_mailbox;
+
+	/* Take ownership of the buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number));
+	if (p2v_mailbox & IXGBE_PFMAILBOX_PFU)
+		ret_val = 0;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_write_mbx_pf - Places a message in the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+                              u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_write;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ixgbe_check_for_msg_pf(hw, vf_number);
+	ixgbe_check_for_ack_pf(hw, vf_number);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]);
+
+	/* Interrupt VF to tell it a message has been sent and release buffer*/
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+	return ret_val;
+
+}
+
+/**
+ *  ixgbe_read_mbx_pf - Read a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  This function copies a message from the mailbox buffer to the caller's
+ *  memory buffer.  The presumption is that the caller knows that there was
+ *  a message due to a VF request so no polling for message is needed.
+ **/
+static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+                             u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		goto out_no_read;
+
+	/* copy the message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i);
+
+	/* Acknowledge the message and release buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_init_mbx_params_pf - set initial values for pf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (hw->mac.type != ixgbe_mac_82599EB)
+		return;
+
+	mbx->timeout = 0;
+	mbx->usec_delay = 0;
+
+	mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+}
+
+struct ixgbe_mbx_operations mbx_ops_82599 = {
+	.read                   = ixgbe_read_mbx_pf,
+	.write                  = ixgbe_write_mbx_pf,
+	.read_posted            = ixgbe_read_posted_mbx,
+	.write_posted           = ixgbe_write_posted_mbx,
+	.check_for_msg          = ixgbe_check_for_msg_pf,
+	.check_for_ack          = ixgbe_check_for_ack_pf,
+	.check_for_rst          = ixgbe_check_for_rst_pf,
+};
+
diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ixgbe/ixgbe_mbx.h
new file mode 100644
index 000000000000..be7ab3309ab7
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_mbx.h
@@ -0,0 +1,96 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "ixgbe_type.h"
+
+#define IXGBE_VFMAILBOX_SIZE        16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX               -100
+
+#define IXGBE_VFMAILBOX             0x002FC
+#define IXGBE_VFMBMEM               0x00200
+
+#define IXGBE_PFMAILBOX(x)          (0x04B00 + (4 * x))
+#define IXGBE_PFMBMEM(vfn)          (0x13000 + (64 * vfn))
+
+#define IXGBE_PFMAILBOX_STS   0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK   0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU   0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU   0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU  0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1  0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1  0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK      0x80000000  /* Messages below or'd with
+                                               * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK     0x40000000  /* Messages below or'd with
+                                               * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS      0x20000000  /* Indicates that VF is still
+                                                 clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT    16
+/* bits 23:16 are used for exra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK     (0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+#define IXGBE_VF_RESET            0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR     0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
+#define IXGBE_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN 4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD     3
+
+#define IXGBE_PF_CONTROL_MSG      0x0100 /* PF control message */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY   500  /* microseconds between retries */
+
+s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_read_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
+void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw);
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
+
+extern struct ixgbe_mbx_operations mbx_ops_82599;
+
+#endif /* _IXGBE_MBX_H_ */
-- 
cgit v1.2.3


From 7f870475c8f102469df44a86387a03cb23e79b90 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:25:29 +0000
Subject: ixgbe: Add SR-IOV register, structure and bit defines

This patch adds register definitions, bit definitions and structures used by
the driver to support SR-IOV features of the 82599 controller.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h      | 31 ++++++++++++++++++++++--
 drivers/net/ixgbe/ixgbe_main.c |  2 +-
 drivers/net/ixgbe/ixgbe_type.h | 53 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 83 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8da8eb535084..ed735857695c 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -98,6 +98,23 @@
 
 #define IXGBE_MAX_RSC_INT_RATE          162760
 
+#define IXGBE_MAX_VF_MC_ENTRIES         30
+#define IXGBE_MAX_VF_FUNCTIONS          64
+#define IXGBE_MAX_VFTA_ENTRIES          128
+#define MAX_EMULATION_MAC_ADDRS         16
+#define VMDQ_P(p)   ((p) + adapter->num_vfs)
+
+struct vf_data_storage {
+	unsigned char vf_mac_addresses[ETH_ALEN];
+	u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES];
+	u16 num_vf_mc_hashes;
+	u16 default_vf_vlan_id;
+	u16 vlans_enabled;
+	unsigned char em_mac_addresses[MAX_EMULATION_MAC_ADDRS * ETH_ALEN];
+	bool clear_to_send;
+	int rar;
+};
+
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer */
 struct ixgbe_tx_buffer {
@@ -171,7 +188,7 @@ struct ixgbe_ring {
 enum ixgbe_ring_f_enum {
 	RING_F_NONE = 0,
 	RING_F_DCB,
-	RING_F_VMDQ,
+	RING_F_VMDQ,  /* SR-IOV uses the same ring feature */
 	RING_F_RSS,
 	RING_F_FDIR,
 #ifdef IXGBE_FCOE
@@ -183,7 +200,7 @@ enum ixgbe_ring_f_enum {
 
 #define IXGBE_MAX_DCB_INDICES   8
 #define IXGBE_MAX_RSS_INDICES  16
-#define IXGBE_MAX_VMDQ_INDICES 16
+#define IXGBE_MAX_VMDQ_INDICES 64
 #define IXGBE_MAX_FDIR_INDICES 64
 #ifdef IXGBE_FCOE
 #define IXGBE_MAX_FCOE_INDICES  8
@@ -288,6 +305,8 @@ struct ixgbe_adapter {
 	/* RX */
 	struct ixgbe_ring *rx_ring ____cacheline_aligned_in_smp; /* One per active queue */
 	int num_rx_queues;
+	int num_rx_pools;		/* == num_rx_queues in 82598 */
+	int num_rx_queues_per_pool;	/* 1 if 82598, can be many if 82599 */
 	u64 hw_csum_rx_error;
 	u64 hw_rx_no_dma_resources;
 	u64 non_eop_descs;
@@ -330,6 +349,8 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
 #define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 28)
 #define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
+#define IXGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 30)
+#define IXGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 31)
 
 	u32 flags2;
 #define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1)
@@ -379,6 +400,11 @@ struct ixgbe_adapter {
 	u64 rsc_total_flush;
 	u32 wol;
 	u16 eeprom_version;
+
+	/* SR-IOV */
+	DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
+	unsigned int num_vfs;
+	struct vf_data_storage *vfinfo;
 };
 
 enum ixbge_state_t {
@@ -440,6 +466,7 @@ extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
                                          u16 flex_byte);
 extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
                                       u8 l4type);
+extern void ixgbe_set_rx_mode(struct net_device *netdev);
 #ifdef IXGBE_FCOE
 extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
 extern int ixgbe_fso(struct ixgbe_adapter *adapter,
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b2f11d45e225..233c3917427e 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2409,7 +2409,7 @@ static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq)
  * responsible for configuring the hardware for proper unicast, multicast and
  * promiscuous mode.
  **/
-static void ixgbe_set_rx_mode(struct net_device *netdev)
+void ixgbe_set_rx_mode(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 84650c6ebe03..ec8ad182e2f5 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -277,6 +277,7 @@
 #define IXGBE_DTXCTL    0x07E00
 
 #define IXGBE_DMATXCTL  0x04A80
+#define IXGBE_PFDTXGSWC     0x08220
 #define IXGBE_DTXMXSZRQ     0x08100
 #define IXGBE_DTXTCPFLGL    0x04A88
 #define IXGBE_DTXTCPFLGH    0x04A8C
@@ -287,6 +288,8 @@
 #define IXGBE_DMATXCTL_NS       0x2 /* No Snoop LSO hdr buffer */
 #define IXGBE_DMATXCTL_GDV      0x8 /* Global Double VLAN */
 #define IXGBE_DMATXCTL_VT_SHIFT 16  /* VLAN EtherType */
+
+#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
 #define IXGBE_DCA_TXCTRL(_i)    (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
 /* Tx DCA Control register : 128 of these (0-127) */
 #define IXGBE_DCA_TXCTRL_82599(_i)  (0x0600C + ((_i) * 0x40))
@@ -497,6 +500,7 @@
 /* DCB registers */
 #define IXGBE_RTRPCS      0x02430
 #define IXGBE_RTTDCS      0x04900
+#define IXGBE_RTTDCS_ARBDIS     0x00000040 /* DCB arbiter disable */
 #define IXGBE_RTTPCS      0x0CD00
 #define IXGBE_RTRUP2TC    0x03020
 #define IXGBE_RTTUP2TC    0x0C800
@@ -730,6 +734,13 @@
 #define IXGBE_GCR_CMPL_TMOUT_RESEND     0x00010000
 #define IXGBE_GCR_CAP_VER2              0x00040000
 
+#define IXGBE_GCR_EXT_MSIX_EN           0x80000000
+#define IXGBE_GCR_EXT_VT_MODE_16        0x00000001
+#define IXGBE_GCR_EXT_VT_MODE_32        0x00000002
+#define IXGBE_GCR_EXT_VT_MODE_64        0x00000003
+#define IXGBE_GCR_EXT_SRIOV             (IXGBE_GCR_EXT_MSIX_EN | \
+                                         IXGBE_GCR_EXT_VT_MODE_64)
+
 /* Time Sync Registers */
 #define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
 #define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
@@ -1065,6 +1076,8 @@
 /* VFRE bitmask */
 #define IXGBE_VFRE_ENABLE_ALL   0xFFFFFFFF
 
+#define IXGBE_VF_INIT_TIMEOUT   200 /* Number of retries to clear RSTI */
+
 /* RDHMPN and TDHMPN bitmasks */
 #define IXGBE_RDHMPN_RDICADDR       0x007FF800
 #define IXGBE_RDHMPN_RDICRDREQ      0x00800000
@@ -1295,6 +1308,7 @@
 /* VLAN pool filtering masks */
 #define IXGBE_VLVF_VIEN         0x80000000  /* filter is valid */
 #define IXGBE_VLVF_ENTRIES      64
+#define IXGBE_VLVF_VLANID_MASK  0x00000FFF
 
 #define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.1q protocol */
 
@@ -1843,6 +1857,12 @@
 #define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT  0x000D /* Priority in upper 3 of 16 */
 #define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT  IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
 
+/* SR-IOV specific macros */
+#define IXGBE_MBVFICR_INDEX(vf_number)   (vf_number >> 4)
+#define IXGBE_MBVFICR(_i)                (0x00710 + (_i * 4))
+#define IXGBE_VFLRE(_i)                  (((_i & 1) ? 0x001C0 : 0x00600))
+#define IXGBE_VFLREC(_i)                 (0x00700 + (_i * 4))
+
 /* Little Endian defines */
 #ifndef __le32
 #define __le32  u32
@@ -2463,6 +2483,37 @@ struct ixgbe_phy_info {
 	bool                            multispeed_fiber;
 };
 
+#include "ixgbe_mbx.h"
+
+struct ixgbe_mbx_operations {
+	s32 (*init_params)(struct ixgbe_hw *hw);
+	s32 (*read)(struct ixgbe_hw *, u32 *, u16,  u16);
+	s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16);
+	s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16,  u16);
+	s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+	s32 (*check_for_msg)(struct ixgbe_hw *, u16);
+	s32 (*check_for_ack)(struct ixgbe_hw *, u16);
+	s32 (*check_for_rst)(struct ixgbe_hw *, u16);
+};
+
+struct ixgbe_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+	struct ixgbe_mbx_operations ops;
+	struct ixgbe_mbx_stats stats;
+	u32 timeout;
+	u32 usec_delay;
+	u32 v2p_mailbox;
+	u16 size;
+};
+
 struct ixgbe_hw {
 	u8 __iomem			*hw_addr;
 	void				*back;
@@ -2472,6 +2523,7 @@ struct ixgbe_hw {
 	struct ixgbe_phy_info		phy;
 	struct ixgbe_eeprom_info	eeprom;
 	struct ixgbe_bus_info		bus;
+	struct ixgbe_mbx_info		mbx;
 	u16				device_id;
 	u16				vendor_id;
 	u16				subsystem_device_id;
@@ -2486,6 +2538,7 @@ struct ixgbe_info {
 	struct ixgbe_mac_operations	*mac_ops;
 	struct ixgbe_eeprom_operations	*eeprom_ops;
 	struct ixgbe_phy_operations	*phy_ops;
+	struct ixgbe_mbx_operations	*mbx_ops;
 };
 
 
-- 
cgit v1.2.3


From 17367270b1d7f529f5d72e8f2cf76672829eb335 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:25:48 +0000
Subject: ixgbe: Add SR-IOV specific features

This module and header file add functions to support SR-IOV features of the
82599 10Gbe controller.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_sriov.c | 336 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbe/ixgbe_sriov.h |  45 ++++++
 2 files changed, 381 insertions(+)
 create mode 100644 drivers/net/ixgbe/ixgbe_sriov.c
 create mode 100644 drivers/net/ixgbe/ixgbe_sriov.h

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
new file mode 100644
index 000000000000..74bca74d57c1
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -0,0 +1,336 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#ifdef NETIF_F_HW_VLAN_TX
+#include <linux/if_vlan.h>
+#endif
+
+#include "ixgbe.h"
+
+#include "ixgbe_sriov.h"
+
+int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
+			    int entries, u16 *hash_list, u32 vf)
+{
+	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+	int i;
+
+	/* only so many hash values supported */
+	entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
+
+	/*
+	 * salt away the number of multi cast addresses assigned
+	 * to this VF for later use to restore when the PF multi cast
+	 * list changes
+	 */
+	vfinfo->num_vf_mc_hashes = entries;
+
+	/*
+	 * VFs are limited to using the MTA hash table for their multicast
+	 * addresses
+	 */
+	for (i = 0; i < entries; i++) {
+		vfinfo->vf_mc_hashes[i] = hash_list[i];;
+	}
+
+	/* Flush and reset the mta with the new values */
+	ixgbe_set_rx_mode(adapter->netdev);
+
+	return 0;
+}
+
+void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct vf_data_storage *vfinfo;
+	int i, j;
+	u32 vector_bit;
+	u32 vector_reg;
+	u32 mta_reg;
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		vfinfo = &adapter->vfinfo[i];
+		for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
+			hw->addr_ctrl.mta_in_use++;
+			vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
+			vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
+			mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+			mta_reg |= (1 << vector_bit);
+			IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+		}
+	}
+}
+
+int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, u32 vf)
+{
+	u32 ctrl;
+
+	/* Check if global VLAN already set, if not set it */
+	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+	if (!(ctrl & IXGBE_VLNCTRL_VFE)) {
+		/* enable VLAN tag insert/strip */
+		ctrl |= IXGBE_VLNCTRL_VFE;
+		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	}
+
+	return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
+}
+
+
+void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf)
+{
+	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
+	vmolr |= (IXGBE_VMOLR_AUPE |
+		  IXGBE_VMOLR_ROMPE |
+		  IXGBE_VMOLR_ROPE |
+		  IXGBE_VMOLR_BAM);
+	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
+}
+
+inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	/* reset offloads to defaults */
+	ixgbe_set_vmolr(hw, vf);
+
+
+	/* reset multicast table array for vf */
+	adapter->vfinfo[vf].num_vf_mc_hashes = 0;
+
+	/* Flush and reset the mta with the new values */
+	ixgbe_set_rx_mode(adapter->netdev);
+
+	if (adapter->vfinfo[vf].rar > 0) {
+		adapter->hw.mac.ops.clear_rar(&adapter->hw,
+		                              adapter->vfinfo[vf].rar);
+		adapter->vfinfo[vf].rar = -1;
+	}
+}
+
+int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
+                          int vf, unsigned char *mac_addr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	adapter->vfinfo[vf].rar = hw->mac.ops.set_rar(hw, vf + 1, mac_addr,
+	                                              vf, IXGBE_RAH_AV);
+	if (adapter->vfinfo[vf].rar < 0) {
+		DPRINTK(DRV, ERR, "Could not set MAC Filter for VF %d\n", vf);
+		return -1;
+	}
+
+	memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, 6);
+
+	return 0;
+}
+
+int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
+{
+	unsigned char vf_mac_addr[6];
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	unsigned int vfn = (event_mask & 0x3f);
+
+	bool enable = ((event_mask & 0x10000000U) != 0);
+
+	if (enable) {
+		random_ether_addr(vf_mac_addr);
+		DPRINTK(PROBE, INFO, "IOV: VF %d is enabled "
+		       "mac %02X:%02X:%02X:%02X:%02X:%02X\n",
+		       vfn,
+		       vf_mac_addr[0], vf_mac_addr[1], vf_mac_addr[2],
+		       vf_mac_addr[3], vf_mac_addr[4], vf_mac_addr[5]);
+		/*
+		 * Store away the VF "permananet" MAC address, it will ask
+		 * for it later.
+		 */
+		memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
+	}
+
+	return 0;
+}
+
+inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg;
+	u32 reg_offset, vf_shift;
+
+	vf_shift = vf % 32;
+	reg_offset = vf / 32;
+
+	/* enable transmit and receive for vf */
+	reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
+	reg |= (reg | (1 << vf_shift));
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
+
+	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
+	reg |= (reg | (1 << vf_shift));
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
+
+	ixgbe_vf_reset_event(adapter, vf);
+}
+
+static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
+{
+	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
+	u32 msgbuf[mbx_size];
+	struct ixgbe_hw *hw = &adapter->hw;
+	s32 retval;
+	int entries;
+	u16 *hash_list;
+	int add, vid;
+
+	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
+
+	if (retval)
+		printk(KERN_ERR "Error receiving message from VF\n");
+
+	/* this is a message we already processed, do nothing */
+	if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
+		return retval;
+
+	/*
+	 * until the vf completes a virtual function reset it should not be
+	 * allowed to start any configuration.
+	 */
+
+	if (msgbuf[0] == IXGBE_VF_RESET) {
+		unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
+		u8 *addr = (u8 *)(&msgbuf[1]);
+		DPRINTK(PROBE, INFO, "VF Reset msg received from vf %d\n", vf);
+		adapter->vfinfo[vf].clear_to_send = false;
+		ixgbe_vf_reset_msg(adapter, vf);
+		adapter->vfinfo[vf].clear_to_send = true;
+
+		/* reply to reset with ack and vf mac address */
+		msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
+		memcpy(addr, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
+		/*
+		 * Piggyback the multicast filter type so VF can compute the
+		 * correct vectors
+		 */
+		msgbuf[3] = hw->mac.mc_filter_type;
+		ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
+
+		return retval;
+	}
+
+	if (!adapter->vfinfo[vf].clear_to_send) {
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+		ixgbe_write_mbx(hw, msgbuf, 1, vf);
+		return retval;
+	}
+
+	switch ((msgbuf[0] & 0xFFFF)) {
+	case IXGBE_VF_SET_MAC_ADDR:
+		{
+			u8 *new_mac = ((u8 *)(&msgbuf[1]));
+			if (is_valid_ether_addr(new_mac))
+				ixgbe_set_vf_mac(adapter, vf, new_mac);
+			else
+				retval = -1;
+		}
+		break;
+	case IXGBE_VF_SET_MULTICAST:
+		entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
+		          >> IXGBE_VT_MSGINFO_SHIFT;
+		hash_list = (u16 *)&msgbuf[1];
+		retval = ixgbe_set_vf_multicasts(adapter, entries,
+		                                 hash_list, vf);
+		break;
+	case IXGBE_VF_SET_LPE:
+		WARN_ON((msgbuf[0] & 0xFFFF) == IXGBE_VF_SET_LPE);
+		break;
+	case IXGBE_VF_SET_VLAN:
+		add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
+		      >> IXGBE_VT_MSGINFO_SHIFT;
+		vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
+		retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
+		break;
+	default:
+		DPRINTK(DRV, ERR, "Unhandled Msg %8.8x\n", msgbuf[0]);
+		retval = IXGBE_ERR_MBX;
+		break;
+	}
+
+	/* notify the VF of the results of what it sent us */
+	if (retval)
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+	else
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
+
+	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
+
+	ixgbe_write_mbx(hw, msgbuf, 1, vf);
+
+	return retval;
+}
+
+static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 msg = IXGBE_VT_MSGTYPE_NACK;
+
+	/* if device isn't clear to send it shouldn't be reading either */
+	if (!adapter->vfinfo[vf].clear_to_send)
+		ixgbe_write_mbx(hw, &msg, 1, vf);
+}
+
+void ixgbe_msg_task(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vf;
+
+	for (vf = 0; vf < adapter->num_vfs; vf++) {
+		/* process any reset requests */
+		if (!ixgbe_check_for_rst(hw, vf))
+			ixgbe_vf_reset_event(adapter, vf);
+
+		/* process any messages pending */
+		if (!ixgbe_check_for_msg(hw, vf))
+			ixgbe_rcv_msg_from_vf(adapter, vf);
+
+		/* process any acks */
+		if (!ixgbe_check_for_ack(hw, vf))
+			ixgbe_rcv_ack_from_vf(adapter, vf);
+	}
+}
+
diff --git a/drivers/net/ixgbe/ixgbe_sriov.h b/drivers/net/ixgbe/ixgbe_sriov.h
new file mode 100644
index 000000000000..664b237eacb9
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_sriov.h
@@ -0,0 +1,45 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_SRIOV_H_
+#define _IXGBE_SRIOV_H_
+
+int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
+                            int entries, u16 *hash_list, u32 vf);
+void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter);
+int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, u32 vf);
+void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf);
+void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf);
+void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf);
+void ixgbe_msg_task(struct ixgbe_adapter *adapter);
+int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
+                     int vf, unsigned char *mac_addr);
+int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask);
+void ixgbe_dump_registers(struct ixgbe_adapter *adapter);
+
+#endif /* _IXGBE_SRIOV_H_ */
+
-- 
cgit v1.2.3


From 92ed72d536445334829af65c63516557fd50f554 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:26:07 +0000
Subject: ixgbe: Add SR-IOV specific modules to driver Makefile

Add the mailbox and SR-IOV feature modules to the ixgbe driver Makefile.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 21b41f42b61c..1dd867df2967 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -33,7 +33,8 @@
 obj-$(CONFIG_IXGBE) += ixgbe.o
 
 ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
-              ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o
+              ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
+              ixgbe_mbx.o
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o
-- 
cgit v1.2.3


From 096a58fdec72335d9cbee94bd10b312c5f14f8af Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:26:26 +0000
Subject: ixgbe: Add SR-IOV feature enablement code

Adds code to the core 82599 module to support SR-IOV features of the 82599
network controller

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_82599.c | 126 ++++++++++++++++++++++------------------
 1 file changed, 68 insertions(+), 58 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 538340527aa6..9ec296cf4c40 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -31,6 +31,7 @@
 
 #include "ixgbe.h"
 #include "ixgbe_phy.h"
+#include "ixgbe_mbx.h"
 
 #define IXGBE_82599_MAX_TX_QUEUES 128
 #define IXGBE_82599_MAX_RX_QUEUES 128
@@ -951,8 +952,6 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 
 	msleep(50);
 
-
-
 	/*
 	 * Store the original AUTOC/AUTOC2 values if they have not been
 	 * stored off yet.  Otherwise restore the stored original
@@ -1095,9 +1094,11 @@ static s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
                                 bool vlan_on)
 {
 	u32 regindex;
+	u32 vlvf_index;
 	u32 bitindex;
 	u32 bits;
 	u32 first_empty_slot;
+	u32 vt_ctl;
 
 	if (vlan > 4095)
 		return IXGBE_ERR_PARAM;
@@ -1124,76 +1125,84 @@ static s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 
 
 	/* Part 2
-	 * If the vind is set
+	 * If VT mode is set
 	 *   Either vlan_on
 	 *     make sure the vlan is in VLVF
 	 *     set the vind bit in the matching VLVFB
 	 *   Or !vlan_on
 	 *     clear the pool bit and possibly the vind
 	 */
-	if (vind) {
-		/* find the vlanid or the first empty slot */
-		first_empty_slot = 0;
-
-		for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
-			bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
-			if (!bits && !first_empty_slot)
-				first_empty_slot = regindex;
-			else if ((bits & 0x0FFF) == vlan)
-				break;
-		}
+	vt_ctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	if (!(vt_ctl & IXGBE_VT_CTL_VT_ENABLE))
+		goto out;
 
-		if (regindex >= IXGBE_VLVF_ENTRIES) {
-			if (first_empty_slot)
-				regindex = first_empty_slot;
-			else {
-				hw_dbg(hw, "No space in VLVF.\n");
-				goto out;
-			}
+	/* find the vlanid or the first empty slot */
+	first_empty_slot = 0;
+
+	for (vlvf_index = 1; vlvf_index < IXGBE_VLVF_ENTRIES; vlvf_index++) {
+		bits = IXGBE_READ_REG(hw, IXGBE_VLVF(vlvf_index));
+		if (!bits && !first_empty_slot)
+			first_empty_slot = vlvf_index;
+		else if ((bits & 0x0FFF) == vlan)
+			break;
+	}
+
+	if (vlvf_index >= IXGBE_VLVF_ENTRIES) {
+		if (first_empty_slot)
+			vlvf_index = first_empty_slot;
+		else {
+			hw_dbg(hw, "No space in VLVF.\n");
+			goto out;
 		}
+	}
 
-		if (vlan_on) {
-			/* set the pool bit */
-			if (vind < 32) {
-				bits = IXGBE_READ_REG(hw,
-				                    IXGBE_VLVFB(regindex * 2));
-				bits |= (1 << vind);
-				IXGBE_WRITE_REG(hw,
-				              IXGBE_VLVFB(regindex * 2), bits);
-			} else {
-				bits = IXGBE_READ_REG(hw,
-				              IXGBE_VLVFB((regindex * 2) + 1));
-				bits |= (1 << vind);
-				IXGBE_WRITE_REG(hw,
-				        IXGBE_VLVFB((regindex * 2) + 1), bits);
-			}
+	if (vlan_on) {
+		/* set the pool bit */
+		if (vind < 32) {
+			bits = IXGBE_READ_REG(hw,
+					      IXGBE_VLVFB(vlvf_index * 2));
+			bits |= (1 << vind);
+			IXGBE_WRITE_REG(hw,
+					IXGBE_VLVFB(vlvf_index * 2), bits);
 		} else {
-			/* clear the pool bit */
-			if (vind < 32) {
-				bits = IXGBE_READ_REG(hw,
-				     IXGBE_VLVFB(regindex * 2));
+			bits = IXGBE_READ_REG(hw,
+				IXGBE_VLVFB((vlvf_index * 2) + 1));
+			bits |= (1 << (vind - 32));
+			IXGBE_WRITE_REG(hw,
+				IXGBE_VLVFB((vlvf_index * 2) + 1), bits);
+		}
+	} else {
+		/* clear the pool bit */
+		if (vind < 32) {
+			bits = IXGBE_READ_REG(hw,
+					      IXGBE_VLVFB(vlvf_index * 2));
 			bits &= ~(1 << vind);
-				IXGBE_WRITE_REG(hw,
-				              IXGBE_VLVFB(regindex * 2), bits);
-				bits |= IXGBE_READ_REG(hw,
-				              IXGBE_VLVFB((regindex * 2) + 1));
-			} else {
-				bits = IXGBE_READ_REG(hw,
-				              IXGBE_VLVFB((regindex * 2) + 1));
-				bits &= ~(1 << vind);
-				IXGBE_WRITE_REG(hw,
-				        IXGBE_VLVFB((regindex * 2) + 1), bits);
-				bits |= IXGBE_READ_REG(hw,
-				                    IXGBE_VLVFB(regindex * 2));
-			}
+			IXGBE_WRITE_REG(hw,
+					IXGBE_VLVFB(vlvf_index * 2), bits);
+			bits |= IXGBE_READ_REG(hw,
+					IXGBE_VLVFB((vlvf_index * 2) + 1));
+		} else {
+			bits = IXGBE_READ_REG(hw,
+				IXGBE_VLVFB((vlvf_index * 2) + 1));
+			bits &= ~(1 << (vind - 32));
+			IXGBE_WRITE_REG(hw,
+				IXGBE_VLVFB((vlvf_index * 2) + 1), bits);
+			bits |= IXGBE_READ_REG(hw,
+					       IXGBE_VLVFB(vlvf_index * 2));
 		}
+	}
 
-		if (bits)
-			IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex),
-			                (IXGBE_VLVF_VIEN | vlan));
-		else
-			IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), 0);
+	if (bits) {
+		IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
+				(IXGBE_VLVF_VIEN | vlan));
+		/* if bits is non-zero then some pools/VFs are still
+		 * using this VLAN ID.  Force the VFTA entry to on */
+		bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+		bits |= (1 << bitindex);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
 	}
+	else
+		IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
 
 out:
 	return 0;
@@ -2655,4 +2664,5 @@ struct ixgbe_info ixgbe_82599_info = {
 	.mac_ops                = &mac_ops_82599,
 	.eeprom_ops             = &eeprom_ops_82599,
 	.phy_ops                = &phy_ops_82599,
+	.mbx_ops                = &mbx_ops_82599,
 };
-- 
cgit v1.2.3


From 1cdd1ec8784399eef55a60887a45f3f46a1c240a Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:26:46 +0000
Subject: ixgbe: Add SR-IOV features to main module

Adds SR-IOV features supported by the 82599 controller to the main driver
module.  If the CONFIG_PCI_IOV kernel option is selected then the SR-IOV
features are enabled.  Use the max_vfs module option to allocate up to 63
virtual functions per physical port.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 278 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 268 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 233c3917427e..a938dba7bdfe 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -45,6 +45,7 @@
 #include "ixgbe.h"
 #include "ixgbe_common.h"
 #include "ixgbe_dcb_82599.h"
+#include "ixgbe_sriov.h"
 
 char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
@@ -124,6 +125,13 @@ static struct notifier_block dca_notifier = {
 };
 #endif
 
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
+                 "per physical function");
+#endif /* CONFIG_PCI_IOV */
+
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
 MODULE_LICENSE("GPL");
@@ -131,6 +139,41 @@ MODULE_VERSION(DRV_VERSION);
 
 #define DEFAULT_DEBUG_LEVEL_SHIFT 3
 
+static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 gcr;
+	u32 gpie;
+	u32 vmdctl;
+
+#ifdef CONFIG_PCI_IOV
+	/* disable iov and allow time for transactions to clear */
+	pci_disable_sriov(adapter->pdev);
+#endif
+
+	/* turn off device IOV mode */
+	gcr = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+	gcr &= ~(IXGBE_GCR_EXT_SRIOV);
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr);
+	gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+	gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+
+	/* set default pool back to 0 */
+	vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
+	IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
+
+	/* take a breather then clean up driver data */
+	msleep(100);
+	if (adapter->vfinfo)
+		kfree(adapter->vfinfo);
+	adapter->vfinfo = NULL;
+
+	adapter->num_vfs = 0;
+	adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+}
+
 static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
 {
 	u32 ctrl_ext;
@@ -1020,7 +1063,12 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 
 	/* set up to autoclear timer, and the vectors */
 	mask = IXGBE_EIMS_ENABLE_MASK;
-	mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
+	if (adapter->num_vfs)
+		mask &= ~(IXGBE_EIMS_OTHER |
+			  IXGBE_EIMS_MAILBOX |
+			  IXGBE_EIMS_LSC);
+	else
+		mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
 }
 
@@ -1249,6 +1297,9 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 	if (eicr & IXGBE_EICR_LSC)
 		ixgbe_check_lsc(adapter);
 
+	if (eicr & IXGBE_EICR_MAILBOX)
+		ixgbe_msg_task(adapter);
+
 	if (hw->mac.type == ixgbe_mac_82598EB)
 		ixgbe_check_fan_failure(adapter, eicr);
 
@@ -1763,6 +1814,8 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
 		mask |= IXGBE_EIMS_ECC;
 		mask |= IXGBE_EIMS_GPI_SDP1;
 		mask |= IXGBE_EIMS_GPI_SDP2;
+		if (adapter->num_vfs)
+			mask |= IXGBE_EIMS_MAILBOX;
 	}
 	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
 	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
@@ -1771,6 +1824,11 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
 	ixgbe_irq_enable_queues(adapter, ~0);
 	IXGBE_WRITE_FLUSH(&adapter->hw);
+
+	if (adapter->num_vfs > 32) {
+		u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
+	}
 }
 
 /**
@@ -1900,6 +1958,8 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
+		if (adapter->num_vfs > 32)
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
 	}
 	IXGBE_WRITE_FLUSH(&adapter->hw);
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -1984,18 +2044,32 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
 
 	if (hw->mac.type == ixgbe_mac_82599EB) {
 		u32 rttdcs;
+		u32 mask;
 
 		/* disable the arbiter while setting MTQC */
 		rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
 		rttdcs |= IXGBE_RTTDCS_ARBDIS;
 		IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
 
-		/* We enable 8 traffic classes, DCB only */
-		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
-			IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
-			                IXGBE_MTQC_8TC_8TQ));
-		else
+		/* set transmit pool layout */
+		mask = (IXGBE_FLAG_SRIOV_ENABLED | IXGBE_FLAG_DCB_ENABLED);
+		switch (adapter->flags & mask) {
+
+		case (IXGBE_FLAG_SRIOV_ENABLED):
+			IXGBE_WRITE_REG(hw, IXGBE_MTQC,
+					(IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF));
+			break;
+
+		case (IXGBE_FLAG_DCB_ENABLED):
+			/* We enable 8 traffic classes, DCB only */
+			IXGBE_WRITE_REG(hw, IXGBE_MTQC,
+				      (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ));
+			break;
+
+		default:
 			IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+			break;
+		}
 
 		/* re-eable the arbiter */
 		rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
@@ -2054,12 +2128,16 @@ static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
 #ifdef CONFIG_IXGBE_DCB
 				 | IXGBE_FLAG_DCB_ENABLED
 #endif
+				 | IXGBE_FLAG_SRIOV_ENABLED
 				);
 
 	switch (mask) {
 	case (IXGBE_FLAG_RSS_ENABLED):
 		mrqc = IXGBE_MRQC_RSSEN;
 		break;
+	case (IXGBE_FLAG_SRIOV_ENABLED):
+		mrqc = IXGBE_MRQC_VMDQEN;
+		break;
 #ifdef CONFIG_IXGBE_DCB
 	case (IXGBE_FLAG_DCB_ENABLED):
 		mrqc = IXGBE_MRQC_RT8TCEN;
@@ -2140,7 +2218,9 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	int rx_buf_len;
 
 	/* Decide whether to use packet split mode or not */
-	adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+	/* Do not use packet split if we're in SR-IOV Mode */
+	if (!adapter->num_vfs)
+		adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
 
 	/* Set the RX buffer length according to the mode */
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
@@ -2152,7 +2232,9 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			              IXGBE_PSRTYPE_IPV4HDR |
 			              IXGBE_PSRTYPE_IPV6HDR |
 			              IXGBE_PSRTYPE_L2HDR;
-			IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
+			IXGBE_WRITE_REG(hw,
+					IXGBE_PSRTYPE(adapter->num_vfs),
+					psrtype);
 		}
 	} else {
 		if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
@@ -2238,6 +2320,30 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
 	}
 
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		u32 vt_reg_bits;
+		u32 reg_offset, vf_shift;
+		u32 vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+		vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN
+			| IXGBE_VT_CTL_REPLEN;
+		vt_reg_bits |= (adapter->num_vfs <<
+				IXGBE_VT_CTL_POOL_SHIFT);
+		IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits);
+		IXGBE_WRITE_REG(hw, IXGBE_MRQC, 0);
+
+		vf_shift = adapter->num_vfs % 32;
+		reg_offset = adapter->num_vfs / 32;
+		IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
+		/* Enable only the PF's pool for Tx/Rx */
+		IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift));
+		IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift));
+		IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+		ixgbe_set_vmolr(hw, adapter->num_vfs);
+	}
+
 	/* Program MRQC for the distribution of queues */
 	mrqc = ixgbe_setup_mrqc(adapter);
 
@@ -2269,6 +2375,20 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	}
 	IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
 
+	if (adapter->num_vfs) {
+		u32 reg;
+
+		/* Map PF MAC address in RAR Entry 0 to first pool
+		 * following VFs */
+		hw->mac.ops.set_vmdq(hw, 0, adapter->num_vfs);
+
+		/* Set up VF register offsets for selected VT Mode, i.e.
+		 * 64 VFs for SR-IOV */
+		reg = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+		reg |= IXGBE_GCR_EXT_SRIOV;
+		IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, reg);
+	}
+
 	rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
 
 	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED ||
@@ -2449,6 +2569,8 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 		addr_list = netdev->mc_list->dmi_addr;
 	hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
 	                                ixgbe_addr_list_itr);
+	if (adapter->num_vfs)
+		ixgbe_restore_vf_multicasts(adapter);
 }
 
 static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@@ -2709,6 +2831,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			/* MSI only */
 			gpie = 0;
 		}
+		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+			gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+			gpie |= IXGBE_GPIE_VTMODE_64;
+		}
 		/* XXX: to interrupt immediately for EICS writes, enable this */
 		/* gpie |= IXGBE_GPIE_EIMEN; */
 		IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
@@ -2783,6 +2909,18 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
 		txdctl |= IXGBE_TXDCTL_ENABLE;
 		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
+		if (hw->mac.type == ixgbe_mac_82599EB) {
+			int wait_loop = 10;
+			/* poll for Tx Enable ready */
+			do {
+				msleep(1);
+				txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
+			} while (--wait_loop &&
+			         !(txdctl & IXGBE_TXDCTL_ENABLE));
+			if (!wait_loop)
+				DPRINTK(DRV, ERR, "Could not enable "
+				        "Tx Queue %d\n", j);
+		}
 	}
 
 	for (i = 0; i < num_rx_rings; i++) {
@@ -2918,7 +3056,8 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
 	}
 
 	/* reprogram the RAR[0] in case user changed it. */
-	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
+			    IXGBE_RAH_AV);
 }
 
 /**
@@ -3286,6 +3425,19 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
 }
 
 #endif /* IXGBE_FCOE */
+/**
+ * ixgbe_set_sriov_queues: Allocate queues for IOV use
+ * @adapter: board private structure to initialize
+ *
+ * IOV doesn't actually use anything, so just NAK the
+ * request for now and let the other queue routines
+ * figure out what to do.
+ */
+static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
+{
+	return false;
+}
+
 /*
  * ixgbe_set_num_queues: Allocate queues for device, feature dependant
  * @adapter: board private structure to initialize
@@ -3299,6 +3451,15 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
  **/
 static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
 {
+	/* Start with base case */
+	adapter->num_rx_queues = 1;
+	adapter->num_tx_queues = 1;
+	adapter->num_rx_pools = adapter->num_rx_queues;
+	adapter->num_rx_queues_per_pool = 1;
+
+	if (ixgbe_set_sriov_queues(adapter))
+		return;
+
 #ifdef IXGBE_FCOE
 	if (ixgbe_set_fcoe_queues(adapter))
 		goto done;
@@ -3569,6 +3730,24 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
 }
 
 #endif /* IXGBE_FCOE */
+/**
+ * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov
+ * @adapter: board private structure to initialize
+ *
+ * SR-IOV doesn't use any descriptor rings but changes the default if
+ * no other mapping is used.
+ *
+ */
+static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
+{
+	adapter->rx_ring[0].reg_idx = adapter->num_vfs * 2;
+	adapter->tx_ring[0].reg_idx = adapter->num_vfs * 2;
+	if (adapter->num_vfs)
+		return true;
+	else
+		return false;
+}
+
 /**
  * ixgbe_cache_ring_register - Descriptor ring to register mapping
  * @adapter: board private structure to initialize
@@ -3586,6 +3765,9 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 	adapter->rx_ring[0].reg_idx = 0;
 	adapter->tx_ring[0].reg_idx = 0;
 
+	if (ixgbe_cache_ring_sriov(adapter))
+		return;
+
 #ifdef IXGBE_FCOE
 	if (ixgbe_cache_ring_fcoe(adapter))
 		return;
@@ -3695,6 +3877,9 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
 	adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
 	adapter->atr_sample_rate = 0;
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		ixgbe_disable_sriov(adapter);
+
 	ixgbe_set_num_queues(adapter);
 
 	err = pci_enable_msi(adapter->pdev);
@@ -5474,7 +5659,8 @@ static int ixgbe_set_mac(struct net_device *netdev, void *p)
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
 
-	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
+			    IXGBE_RAH_AV);
 
 	return 0;
 }
@@ -5607,6 +5793,61 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 #endif /* IXGBE_FCOE */
 };
 
+static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
+			   const struct ixgbe_info *ii)
+{
+#ifdef CONFIG_PCI_IOV
+	struct ixgbe_hw *hw = &adapter->hw;
+	int err;
+
+	if (hw->mac.type != ixgbe_mac_82599EB || !max_vfs)
+		return;
+
+	/* The 82599 supports up to 64 VFs per physical function
+	 * but this implementation limits allocation to 63 so that
+	 * basic networking resources are still available to the
+	 * physical function
+	 */
+	adapter->num_vfs = (max_vfs > 63) ? 63 : max_vfs;
+	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
+	err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
+	if (err) {
+		DPRINTK(PROBE, ERR,
+			"Failed to enable PCI sriov: %d\n", err);
+		goto err_novfs;
+	}
+	/* If call to enable VFs succeeded then allocate memory
+	 * for per VF control structures.
+	 */
+	adapter->vfinfo =
+		kcalloc(adapter->num_vfs,
+			sizeof(struct vf_data_storage), GFP_KERNEL);
+	if (adapter->vfinfo) {
+		/* Now that we're sure SR-IOV is enabled
+		 * and memory allocated set up the mailbox parameters
+		 */
+		ixgbe_init_mbx_params_pf(hw);
+		memcpy(&hw->mbx.ops, ii->mbx_ops,
+		       sizeof(hw->mbx.ops));
+
+		/* Disable RSC when in SR-IOV mode */
+		adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
+				     IXGBE_FLAG2_RSC_ENABLED);
+		return;
+	}
+
+	/* Oh oh */
+	DPRINTK(PROBE, ERR,
+		"Unable to allocate memory for VF "
+		"Data Storage - SRIOV disabled\n");
+	pci_disable_sriov(adapter->pdev);
+
+err_novfs:
+	adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+	adapter->num_vfs = 0;
+#endif /* CONFIG_PCI_IOV */
+}
+
 /**
  * ixgbe_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -5781,6 +6022,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 	}
 
+	ixgbe_probe_vf(adapter, ii);
+
 	netdev->features = NETIF_F_SG |
 	                   NETIF_F_IP_CSUM |
 	                   NETIF_F_HW_VLAN_TX |
@@ -5801,6 +6044,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->vlan_features |= NETIF_F_IPV6_CSUM;
 	netdev->vlan_features |= NETIF_F_SG;
 
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED |
+				    IXGBE_FLAG_DCB_ENABLED);
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
 		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
 
@@ -5927,6 +6173,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		ixgbe_setup_dca(adapter);
 	}
 #endif
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n",
+			adapter->num_vfs);
+		for (i = 0; i < adapter->num_vfs; i++)
+			ixgbe_vf_configuration(pdev, (i | 0x10000000));
+	}
+
 	/* add san mac addr to netdev */
 	ixgbe_add_sanmac_netdev(netdev);
 
@@ -5939,6 +6192,8 @@ err_register:
 	ixgbe_clear_interrupt_scheme(adapter);
 err_sw_init:
 err_eeprom:
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		ixgbe_disable_sriov(adapter);
 	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
 	del_timer_sync(&adapter->sfp_timer);
 	cancel_work_sync(&adapter->sfp_task);
@@ -6007,6 +6262,9 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	if (netdev->reg_state == NETREG_REGISTERED)
 		unregister_netdev(netdev);
 
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		ixgbe_disable_sriov(adapter);
+
 	ixgbe_clear_interrupt_scheme(adapter);
 
 	ixgbe_release_hw_control(adapter);
-- 
cgit v1.2.3


From bdbec4b86ee99b020e159f9bd604003a3ae3b0ab Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Sat, 9 Jan 2010 02:27:05 +0000
Subject: ixgbe: Fix ethtool diag test for VT mode operation

Skip MAC loopback test when the adapter is set to a VT mode such as SR-IOV
or VMDq

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_ethtool.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0bd49d3b9f65..a0107b5a28e7 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1867,11 +1867,22 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		if (ixgbe_intr_test(adapter, &data[2]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
+		/* If SRIOV or VMDq is enabled then skip MAC
+		 * loopback diagnostic. */
+		if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
+				      IXGBE_FLAG_VMDQ_ENABLED)) {
+			DPRINTK(HW, INFO, "Skip MAC loopback diagnostic in VT "
+				"mode\n");
+			data[3] = 0;
+			goto skip_loopback;
+		}
+
 		ixgbe_reset(adapter);
 		DPRINTK(HW, INFO, "loopback testing starting\n");
 		if (ixgbe_loopback_test(adapter, &data[3]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
+skip_loopback:
 		ixgbe_reset(adapter);
 
 		clear_bit(__IXGBE_TESTING, &adapter->state);
-- 
cgit v1.2.3


From 3ccd4c6167d3b39d52631767ebbf8b5677c5855d Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <oliver@hartkopp.net>
Date: Tue, 12 Jan 2010 02:00:46 -0800
Subject: can: Unify droping of invalid tx skbs and netdev stats

To prevent the CAN drivers to operate on invalid socketbuffers the skbs are
now checked and silently dropped at the xmit-function consistently.

Also the netdev stats are consistently using the CAN data length code (dlc)
for [rx|tx]_bytes now.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/at91_can.c        |  3 +++
 drivers/net/can/bfin_can.c        |  3 +++
 drivers/net/can/mcp251x.c         |  6 +-----
 drivers/net/can/mscan/mscan.c     |  5 +----
 drivers/net/can/sja1000/sja1000.c |  3 +++
 drivers/net/can/ti_hecc.c         |  4 +++-
 drivers/net/can/usb/ems_usb.c     |  3 +++
 drivers/net/can/vcan.c            | 12 +++++++++---
 include/linux/can/dev.h           | 15 +++++++++++++++
 9 files changed, 41 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 166cc7e579c0..f7287497ba6e 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -342,6 +342,9 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int mb, prio;
 	u32 reg_mid, reg_mcr;
 
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
 	mb = get_tx_next_mb(priv);
 	prio = get_tx_next_prio(priv);
 
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index 0ec1524523cc..7e1926e79e98 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -318,6 +318,9 @@ static int bfin_can_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u16 val;
 	int i;
 
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
 	netif_stop_queue(dev);
 
 	/* fill id */
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 1a72ca066a17..afa2fa45fed9 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -494,12 +494,8 @@ static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
 		return NETDEV_TX_BUSY;
 	}
 
-	if (skb->len != sizeof(struct can_frame)) {
-		dev_err(&spi->dev, "dropping packet - bad length\n");
-		dev_kfree_skb(skb);
-		net->stats.tx_dropped++;
+	if (can_dropped_invalid_skb(net, skb))
 		return NETDEV_TX_OK;
-	}
 
 	netif_stop_queue(net);
 	priv->tx_skb = skb;
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 500d18918bd5..40827c128b65 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -204,11 +204,8 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int i, rtr, buf_id;
 	u32 can_id;
 
-	if (skb->len != sizeof(*frame) || frame->can_dlc > 8) {
-		kfree_skb(skb);
-		dev->stats.tx_dropped++;
+	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
-	}
 
 	out_8(&regs->cantier, 0);
 
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 542a4f7255b4..345304d779b9 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -249,6 +249,9 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
 	uint8_t dreg;
 	int i;
 
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
 	netif_stop_queue(dev);
 
 	fi = dlc = cf->can_dlc;
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 5c993c2da528..7d370e32a7a8 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -477,6 +477,9 @@ static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev)
 	u32 mbxno, mbx_mask, data;
 	unsigned long flags;
 
+	if (can_dropped_invalid_skb(ndev, skb))
+		return NETDEV_TX_OK;
+
 	mbxno = get_tx_head_mb(priv);
 	mbx_mask = BIT(mbxno);
 	spin_lock_irqsave(&priv->mbx_lock, flags);
@@ -491,7 +494,6 @@ static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev)
 	spin_unlock_irqrestore(&priv->mbx_lock, flags);
 
 	/* Prepare mailbox for transmission */
-	data = min_t(u8, cf->can_dlc, 8);
 	if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */
 		data |= HECC_CANMCF_RTR;
 	data |= get_tx_head_prio(priv) << 8;
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index efbb05c71bf4..ddb17e256656 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -767,6 +767,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	size_t size = CPC_HEADER_SIZE + CPC_MSG_HEADER_LEN
 			+ sizeof(struct cpc_can_msg);
 
+	if (can_dropped_invalid_skb(netdev, skb))
+		return NETDEV_TX_OK;
+
 	/* create a URB, and a buffer for it, and copy the data to the URB */
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index 80ac56313981..d124d837ae58 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -47,6 +47,7 @@
 #include <linux/if_arp.h>
 #include <linux/if_ether.h>
 #include <linux/can.h>
+#include <linux/can/dev.h>
 #include <net/rtnetlink.h>
 
 static __initdata const char banner[] =
@@ -70,10 +71,11 @@ MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
 
 static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
 {
+	struct can_frame *cf = (struct can_frame *)skb->data;
 	struct net_device_stats *stats = &dev->stats;
 
 	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
+	stats->rx_bytes += cf->can_dlc;
 
 	skb->protocol  = htons(ETH_P_CAN);
 	skb->pkt_type  = PACKET_BROADCAST;
@@ -85,11 +87,15 @@ static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
 
 static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
 {
+	struct can_frame *cf = (struct can_frame *)skb->data;
 	struct net_device_stats *stats = &dev->stats;
 	int loop;
 
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
 	stats->tx_packets++;
-	stats->tx_bytes += skb->len;
+	stats->tx_bytes += cf->can_dlc;
 
 	/* set flag whether this packet has to be looped back */
 	loop = skb->pkt_type == PACKET_LOOPBACK;
@@ -103,7 +109,7 @@ static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
 			 * CAN core already did the echo for us
 			 */
 			stats->rx_packets++;
-			stats->rx_bytes += skb->len;
+			stats->rx_bytes += cf->can_dlc;
 		}
 		kfree_skb(skb);
 		return NETDEV_TX_OK;
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 3db7767d2a17..7e7c98a3e908 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -60,6 +60,21 @@ struct can_priv {
  */
 #define get_can_dlc(i)	(min_t(__u8, (i), 8))
 
+/* Drop a given socketbuffer if it does not contain a valid CAN frame. */
+static inline int can_dropped_invalid_skb(struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	const struct can_frame *cf = (struct can_frame *)skb->data;
+
+	if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) {
+		kfree_skb(skb);
+		dev->stats.tx_dropped++;
+		return 1;
+	}
+
+	return 0;
+}
+
 struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
 void free_candev(struct net_device *dev);
 
-- 
cgit v1.2.3


From 14acdde6e527950f66c084dbf19bad6fbfcaeedc Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Fri, 18 Dec 2009 11:26:04 -0500
Subject: ath9k: re-enable ps by default for new single chip families

The newer single chip hardware family of chipsets have not been
experiencing issues with power saving set by default with recent
fixes merged (even into stable). The remaining issues are only
reported with AR5416 and since enabling PS by default can increase
power savings considerably best to take advantage of that feature
as this has been tested properly.

For more details on this issue see the bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=14267

We leave AR5416 with PS disabled by default, that seems to require
some more work.

Cc: stable@kernel.org
Cc: Peter Stuge <peter@stuge.se>
Cc: Justin P. Mattock  <justinmattock@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 79fbbda15493..3777b8449789 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1838,6 +1838,8 @@ bad_free_hw:
 
 void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
+	struct ath_hw *ah = sc->sc_ah;
+
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		IEEE80211_HW_SIGNAL_DBM |
@@ -1855,7 +1857,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
-	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+	if (AR_SREV_5416(ah))
+		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	hw->queues = 4;
 	hw->max_rates = 4;
-- 
cgit v1.2.3


From e1aa369ec8fb981ef78bc5be3b3c58de7c5ff769 Mon Sep 17 00:00:00 2001
From: Lukáš Turek <8an@praha12.net>
Date: Mon, 21 Dec 2009 22:50:49 +0100
Subject: ath5k: Fix functions for getting/setting slot time

Functions ath5k_hw_get_slot_time and ath5k_hw_set_slot_time were
converting microseconds to clocks only for AR5210, although it's needed
for all supported devices. The conversion was moved outside the
hardware-specific branches.

The original code also limited minimum slot time to 9, while turbo modes
use 6, this was fixed too.

Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/qcu.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index eeebb9aef206..e322a104e7fe 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -520,12 +520,16 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
  */
 unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
 {
+	unsigned int slot_time_clock;
+
 	ATH5K_TRACE(ah->ah_sc);
+
 	if (ah->ah_version == AR5K_AR5210)
-		return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
-				AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
+		slot_time_clock = ath5k_hw_reg_read(ah, AR5K_SLOT_TIME);
 	else
-		return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
+		slot_time_clock = ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT);
+
+	return ath5k_hw_clocktoh(slot_time_clock & 0xffff, ah->ah_turbo);
 }
 
 /*
@@ -533,15 +537,17 @@ unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
  */
 int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
 {
+	u32 slot_time_clock = ath5k_hw_htoclock(slot_time, ah->ah_turbo);
+
 	ATH5K_TRACE(ah->ah_sc);
-	if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
+
+	if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX)
 		return -EINVAL;
 
 	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
-				ah->ah_turbo), AR5K_SLOT_TIME);
+		ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME);
 	else
-		ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
+		ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 3578e6ebb305e6bf7519f6e86741772892f4d51a Mon Sep 17 00:00:00 2001
From: Lukáš Turek <8an@praha12.net>
Date: Mon, 21 Dec 2009 22:50:50 +0100
Subject: ath5k: Reimplement clock rate to usec conversion

The original code was correct in 802.11a mode only, 802.11b/g uses
different clock rates. The new code uses values taken from FreeBSD HAL
and should be correct for all modes including turbo modes.

The former rate calculation was used by slope coefficient calculation
function ath5k_hw_write_ofdm_timings. However, this function requires
the 802.11a values even in 802.11g mode. Thus the use of
ath5k_hw_htoclock was replaced by hardcoded values. Possibly the slope
coefficient calculation is not related to clock rate at all.

Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/ath5k.h | 22 +++---------
 drivers/net/wireless/ath/ath5k/pcu.c   | 64 ++++++++++++++++++++++++++++------
 drivers/net/wireless/ath/ath5k/qcu.c   |  4 +--
 drivers/net/wireless/ath/ath5k/reset.c |  5 ++-
 4 files changed, 62 insertions(+), 33 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6a2a96761111..ae311d2dcc16 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1231,6 +1231,10 @@ extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
 extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
 extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
 extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
+/* Clock rate related functions */
+unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
+unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
+unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah);
 /* Key table (WEP) functions */
 extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
@@ -1310,24 +1314,6 @@ extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
  * Functions used internaly
  */
 
-/*
- * Translate usec to hw clock units
- * TODO: Half/quarter rate
- */
-static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
-{
-	return turbo ? (usec * 80) : (usec * 40);
-}
-
-/*
- * Translate hw clock units to usec
- * TODO: Half/quarter rate
- */
-static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
-{
-	return turbo ? (clock / 80) : (clock / 40);
-}
-
 static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
 {
         return &ah->common;
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 64fc1eb9b6d9..b601ff9865fd 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -187,8 +187,8 @@ unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
 
-	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
-			AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+	return ath5k_hw_clocktoh(ah, AR5K_REG_MS(ath5k_hw_reg_read(ah,
+			AR5K_TIME_OUT), AR5K_TIME_OUT_ACK));
 }
 
 /**
@@ -200,12 +200,12 @@ unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
 int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
-			ah->ah_turbo) <= timeout)
+	if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK))
+			<= timeout)
 		return -EINVAL;
 
 	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
-		ath5k_hw_htoclock(timeout, ah->ah_turbo));
+		ath5k_hw_htoclock(ah, timeout));
 
 	return 0;
 }
@@ -218,8 +218,8 @@ int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
 unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
-			AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+	return ath5k_hw_clocktoh(ah, AR5K_REG_MS(ath5k_hw_reg_read(ah,
+			AR5K_TIME_OUT), AR5K_TIME_OUT_CTS));
 }
 
 /**
@@ -231,16 +231,60 @@ unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
 int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
-			ah->ah_turbo) <= timeout)
+	if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS))
+			<= timeout)
 		return -EINVAL;
 
 	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
-			ath5k_hw_htoclock(timeout, ah->ah_turbo));
+			ath5k_hw_htoclock(ah, timeout));
 
 	return 0;
 }
 
+/**
+ * ath5k_hw_htoclock - Translate usec to hw clock units
+ *
+ * @ah: The &struct ath5k_hw
+ * @usec: value in microseconds
+ */
+unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
+{
+	return usec * ath5k_hw_get_clockrate(ah);
+}
+
+/**
+ * ath5k_hw_clocktoh - Translate hw clock units to usec
+ * @clock: value in hw clock units
+ */
+unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
+{
+	return clock / ath5k_hw_get_clockrate(ah);
+}
+
+/**
+ * ath5k_hw_get_clockrate - Get the clock rate for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah)
+{
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+	int clock;
+
+	if (channel->hw_value & CHANNEL_5GHZ)
+		clock = 40; /* 802.11a */
+	else if (channel->hw_value & CHANNEL_CCK)
+		clock = 22; /* 802.11b */
+	else
+		clock = 44; /* 802.11g */
+
+	/* Clock rate in turbo modes is twice the normal rate */
+	if (channel->hw_value & CHANNEL_TURBO)
+		clock *= 2;
+
+	return clock;
+}
+
 /**
  * ath5k_hw_set_lladdr - Set station id
  *
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index e322a104e7fe..abe36c0d139c 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -529,7 +529,7 @@ unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
 	else
 		slot_time_clock = ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT);
 
-	return ath5k_hw_clocktoh(slot_time_clock & 0xffff, ah->ah_turbo);
+	return ath5k_hw_clocktoh(ah, slot_time_clock & 0xffff);
 }
 
 /*
@@ -537,7 +537,7 @@ unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
  */
 int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
 {
-	u32 slot_time_clock = ath5k_hw_htoclock(slot_time, ah->ah_turbo);
+	u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time);
 
 	ATH5K_TRACE(ah->ah_sc);
 
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 62954fc77869..299b33a03979 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -60,12 +60,11 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 		!(channel->hw_value & CHANNEL_OFDM));
 
 	/* Get coefficient
-	 * ALGO: coef = (5 * clock * carrier_freq) / 2)
+	 * ALGO: coef = (5 * clock / carrier_freq) / 2
 	 * we scale coef by shifting clock value by 24 for
 	 * better precision since we use integers */
 	/* TODO: Half/quarter rate */
-	clock =  ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);
-
+	clock =  (channel->hw_value & CHANNEL_TURBO) ? 80 : 40;
 	coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
 
 	/* Get exponent
-- 
cgit v1.2.3


From 6e08d228b6d8e93d7b25b3573c6da7da179c2ae1 Mon Sep 17 00:00:00 2001
From: Lukáš Turek <8an@praha12.net>
Date: Mon, 21 Dec 2009 22:50:51 +0100
Subject: ath5k: Implement mac80211 callback set_coverage_class

The callback sets slot time as specified in IEEE 802.11-2007 section
17.3.8.6 (for 20MHz channels only for now) and raises ACK and CTS
timeouts accordingly. The values are persistent, they are restored after
device reset.

Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/ath5k.h |  2 ++
 drivers/net/wireless/ath/ath5k/base.c  | 22 +++++++++++++
 drivers/net/wireless/ath/ath5k/pcu.c   | 57 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath5k/reset.c |  4 +++
 4 files changed, 85 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index ae311d2dcc16..66bcb506a112 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1063,6 +1063,7 @@ struct ath5k_hw {
 	u32			ah_cw_min;
 	u32			ah_cw_max;
 	u32			ah_limit_tx_retries;
+	u8			ah_coverage_class;
 
 	/* Antenna Control */
 	u32			ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
@@ -1200,6 +1201,7 @@ extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah);
 
 /* Protocol Control Unit Functions */
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
+extern void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
 /* BSSID Functions */
 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
 extern void ath5k_hw_set_associd(struct ath5k_hw *ah);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index fdfaf0f618f1..b5015376d4ba 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -254,6 +254,8 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 		u32 changes);
 static void ath5k_sw_scan_start(struct ieee80211_hw *hw);
 static void ath5k_sw_scan_complete(struct ieee80211_hw *hw);
+static void ath5k_set_coverage_class(struct ieee80211_hw *hw,
+		u8 coverage_class);
 
 static const struct ieee80211_ops ath5k_hw_ops = {
 	.tx 		= ath5k_tx,
@@ -274,6 +276,7 @@ static const struct ieee80211_ops ath5k_hw_ops = {
 	.bss_info_changed = ath5k_bss_info_changed,
 	.sw_scan_start	= ath5k_sw_scan_start,
 	.sw_scan_complete = ath5k_sw_scan_complete,
+	.set_coverage_class = ath5k_set_coverage_class,
 };
 
 /*
@@ -3262,3 +3265,22 @@ static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
 	ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
 		AR5K_LED_ASSOC : AR5K_LED_INIT);
 }
+
+/**
+ * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
+ *
+ * @hw: struct ieee80211_hw pointer
+ * @coverage_class: IEEE 802.11 coverage class number
+ *
+ * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
+ * coverage class. The values are persistent, they are restored after device
+ * reset.
+ */
+static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	mutex_lock(&sc->lock);
+	ath5k_hw_set_coverage_class(sc->ah, coverage_class);
+	mutex_unlock(&sc->lock);
+}
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index b601ff9865fd..aefe84f9c04b 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -285,6 +285,42 @@ unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah)
 	return clock;
 }
 
+/**
+ * ath5k_hw_get_default_slottime - Get the default slot time for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
+{
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+
+	if (channel->hw_value & CHANNEL_TURBO)
+		return 6; /* both turbo modes */
+
+	if (channel->hw_value & CHANNEL_CCK)
+		return 20; /* 802.11b */
+
+	return 9; /* 802.11 a/g */
+}
+
+/**
+ * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
+{
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+
+	if (channel->hw_value & CHANNEL_TURBO)
+		return 8; /* both turbo modes */
+
+	if (channel->hw_value & CHANNEL_5GHZ)
+		return 16; /* 802.11a */
+
+	return 10; /* 802.11 b/g */
+}
+
 /**
  * ath5k_hw_set_lladdr - Set station id
  *
@@ -1094,3 +1130,24 @@ int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
 	return 0;
 }
 
+/**
+ * ath5k_hw_set_coverage_class - Set IEEE 802.11 coverage class
+ *
+ * @ah: The &struct ath5k_hw
+ * @coverage_class: IEEE 802.11 coverage class number
+ *
+ * Sets slot time, ACK timeout and CTS timeout for given coverage class.
+ */
+void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
+{
+	/* As defined by IEEE 802.11-2007 17.3.8.6 */
+	int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class;
+	int ack_timeout = ath5k_hw_get_default_sifs(ah) + slot_time;
+	int cts_timeout = ack_timeout;
+
+	ath5k_hw_set_slot_time(ah, slot_time);
+	ath5k_hw_set_ack_timeout(ah, ack_timeout);
+	ath5k_hw_set_cts_timeout(ah, cts_timeout);
+
+	ah->ah_coverage_class = coverage_class;
+}
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 299b33a03979..6690923fd78c 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1316,6 +1316,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	/* Restore antenna mode */
 	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
+	/* Restore slot time and ACK timeouts */
+	if (ah->ah_coverage_class > 0)
+		ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class);
+
 	/*
 	 * Configure QCUs/DCUs
 	 */
-- 
cgit v1.2.3


From 6c0fe26581406bff3d15fd6051453e80cfe70fd6 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 30 Dec 2009 11:36:31 +0100
Subject: rt2x00: RF3052 is a valid RF chipset for USB devices as well.

The RF3052 chipset is now also being integrated onto USB devices, so
allow the RF chipset and don't treat it as PCI/SOC only.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 126899091707..d300ff84b717 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1862,7 +1862,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	    !rt2x00_rf(rt2x00dev, RF3020) &&
 	    !rt2x00_rf(rt2x00dev, RF2020) &&
 	    !rt2x00_rf(rt2x00dev, RF3021) &&
-	    !rt2x00_rf(rt2x00dev, RF3022)) {
+	    !rt2x00_rf(rt2x00dev, RF3022) &&
+	    !rt2x00_rf(rt2x00dev, RF3052)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2047,7 +2048,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2x00_rf(rt2x00dev, RF2820) ||
 	    rt2x00_rf(rt2x00dev, RF2720) ||
-	    (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(rt2x00dev, RF3052))) {
+	    rt2x00_rf(rt2x00dev, RF3052)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals;
 	} else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) {
-- 
cgit v1.2.3


From 67a4c1e24d58e0d88ed88539641631f6fc8a0cfd Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 30 Dec 2009 11:36:32 +0100
Subject: rt2x00: Unify rt2800 WPDMA ready waiting functions.

The rt2800pci_wait_wpdma_ready and rt2800usb_wait_wpdma_ready functions are
exactly the same, so unify them into rt200lib.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 19 +++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2800lib.h |  1 +
 drivers/net/wireless/rt2x00/rt2800pci.c | 24 +++---------------------
 drivers/net/wireless/rt2x00/rt2800usb.c | 22 ++--------------------
 4 files changed, 25 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index d300ff84b717..ca700a402e64 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -245,6 +245,25 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2800_mcu_request);
 
+int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+	return -EACCES;
+}
+EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
+
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 const struct rt2x00debug rt2800_rt2x00debug = {
 	.owner	= THIS_MODULE,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 535ce22f2ac8..9adb3431374d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -139,6 +139,7 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 int rt2800_init_registers(struct rt2x00_dev *rt2x00dev);
 int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev);
 int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev);
+int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev);
 
 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
 void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b93eabb4fbe1..daea0b7c416e 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -453,24 +453,6 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
 }
 
-static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-			return 0;
-
-		msleep(1);
-	}
-
-	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-	return -EACCES;
-}
-
 static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -479,10 +461,10 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all registers.
 	 */
-	if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800pci_init_queues(rt2x00dev) ||
 		     rt2800_init_registers(rt2x00dev) ||
-		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800_init_bbp(rt2x00dev) ||
 		     rt2800_init_rfcsr(rt2x00dev)))
 		return -EIO;
@@ -562,7 +544,7 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
 
 	/* Wait for DMA, ignore error */
-	rt2800pci_wait_wpdma_ready(rt2x00dev);
+	rt2800_wait_wpdma_ready(rt2x00dev);
 }
 
 static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 0510f020dcf5..82755cf8b73e 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -248,24 +248,6 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 }
 
-static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-			return 0;
-
-		msleep(1);
-	}
-
-	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-	return -EACCES;
-}
-
 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -274,7 +256,7 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all registers.
 	 */
-	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800_init_registers(rt2x00dev) ||
 		     rt2800_init_bbp(rt2x00dev) ||
 		     rt2800_init_rfcsr(rt2x00dev)))
@@ -344,7 +326,7 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
 
 	/* Wait for DMA, ignore error */
-	rt2800usb_wait_wpdma_ready(rt2x00dev);
+	rt2800_wait_wpdma_ready(rt2x00dev);
 
 	rt2x00usb_disable_radio(rt2x00dev);
 }
-- 
cgit v1.2.3


From b3579d6adcf7b24464274967a96d12467cfb11a7 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Wed, 30 Dec 2009 11:36:34 +0100
Subject: rt2x00: Make rt2800_init_led static and don't export it.

It is only used within the rt2800lib module itself.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 3 +--
 drivers/net/wireless/rt2x00/rt2800lib.h | 2 --
 2 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index ca700a402e64..529a37364eb0 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -366,7 +366,7 @@ static int rt2800_blink_set(struct led_classdev *led_cdev,
 	return 0;
 }
 
-void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+static void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
 		     struct rt2x00_led *led, enum led_type type)
 {
 	led->rt2x00dev = rt2x00dev;
@@ -375,7 +375,6 @@ void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt2800_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-EXPORT_SYMBOL_GPL(rt2800_init_led);
 #endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 9adb3431374d..ebabeae62d1b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -114,8 +114,6 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 extern const struct rt2x00debug rt2800_rt2x00debug;
 
 int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
-void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
-		     struct rt2x00_led *led, enum led_type type);
 int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
 			     struct rt2x00lib_crypto *crypto,
 			     struct ieee80211_key_conf *key);
-- 
cgit v1.2.3


From f7f70579340dba1e551c0e52349fde0370592174 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 5 Jan 2010 20:16:32 +0200
Subject: wl1251: get PS Poll and Nullfunc templates from mac80211

Now that mac80211 creates templates for PS Poll and Nullfunc frames, use
them instead of creating our own.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 58 +++++++++----------------------
 1 file changed, 16 insertions(+), 42 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 4e373f3dbc43..6cce86462fac 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -563,45 +563,6 @@ static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
 	mutex_unlock(&wl->mutex);
 }
 
-static int wl1251_build_null_data(struct wl1251 *wl)
-{
-	struct wl12xx_null_data_template template;
-
-	if (!is_zero_ether_addr(wl->bssid)) {
-		memcpy(template.header.da, wl->bssid, ETH_ALEN);
-		memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
-	} else {
-		memset(template.header.da, 0xff, ETH_ALEN);
-		memset(template.header.bssid, 0xff, ETH_ALEN);
-	}
-
-	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
-	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
-						IEEE80211_STYPE_NULLFUNC |
-						IEEE80211_FCTL_TODS);
-
-	return wl1251_cmd_template_set(wl, CMD_NULL_DATA, &template,
-				       sizeof(template));
-
-}
-
-static int wl1251_build_ps_poll(struct wl1251 *wl, u16 aid)
-{
-	struct wl12xx_ps_poll_template template;
-
-	memcpy(template.bssid, wl->bssid, ETH_ALEN);
-	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
-
-	/* aid in PS-Poll has its two MSBs each set to 1 */
-	template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid);
-
-	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
-
-	return wl1251_cmd_template_set(wl, CMD_PS_POLL, &template,
-				       sizeof(template));
-
-}
-
 static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct wl1251 *wl = hw->priv;
@@ -1101,7 +1062,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	enum wl1251_cmd_ps_mode mode;
 	struct wl1251 *wl = hw->priv;
-	struct sk_buff *beacon;
+	struct sk_buff *beacon, *skb;
 	int ret;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
@@ -1115,7 +1076,13 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_BSSID) {
 		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
 
-		ret = wl1251_build_null_data(wl);
+		skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
+		if (!skb)
+			goto out_sleep;
+
+		ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA,
+					      skb->data, skb->len);
+		dev_kfree_skb(skb);
 		if (ret < 0)
 			goto out;
 
@@ -1136,7 +1103,14 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 							  wl->dtim_period);
 			wl->aid = bss_conf->aid;
 
-			ret = wl1251_build_ps_poll(wl, wl->aid);
+			skb = ieee80211_pspoll_get(wl->hw, wl->vif);
+			if (!skb)
+				goto out_sleep;
+
+			ret = wl1251_cmd_template_set(wl, CMD_PS_POLL,
+						      skb->data,
+						      skb->len);
+			dev_kfree_skb(skb);
 			if (ret < 0)
 				goto out_sleep;
 
-- 
cgit v1.2.3


From 3a98c30f3e8bb1f32b5bcb74a39647b3670de275 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 5 Jan 2010 20:16:51 +0200
Subject: wl1251: cleanup scanning code

The current scanning code wasn't following the preferred style. Move code
related to scan and trigger scan to commans to wl1251_cmd.c. Because
there's now less code in wl1251_hw_scan(), the function can be now
merged with wl1251_op_hw_scan().

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_cmd.c  |  82 ++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1251_cmd.h  |  17 ++--
 drivers/net/wireless/wl12xx/wl1251_main.c | 125 ++++++------------------------
 3 files changed, 117 insertions(+), 107 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.c b/drivers/net/wireless/wl12xx/wl1251_cmd.c
index 770f260726bd..fcbfbd7585f8 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.c
@@ -410,3 +410,85 @@ out:
 	kfree(cmd);
 	return ret;
 }
+
+int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    unsigned int n_channels, unsigned int n_probes)
+{
+	struct wl1251_cmd_scan *cmd;
+	int i, ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd scan");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+	cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
+						    CFG_RX_MGMT_EN |
+						    CFG_RX_BCN_EN);
+	cmd->params.scan_options = 0;
+	cmd->params.num_channels = n_channels;
+	cmd->params.num_probe_requests = n_probes;
+	cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+	cmd->params.tid_trigger = 0;
+
+	for (i = 0; i < n_channels; i++) {
+		cmd->channels[i].min_duration =
+			cpu_to_le32(WL1251_SCAN_MIN_DURATION);
+		cmd->channels[i].max_duration =
+			cpu_to_le32(WL1251_SCAN_MAX_DURATION);
+		memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
+		memset(&cmd->channels[i].bssid_msb, 0xff, 2);
+		cmd->channels[i].early_termination = 0;
+		cmd->channels[i].tx_power_att = 0;
+		cmd->channels[i].channel = i + 1;
+	}
+
+	cmd->params.ssid_len = ssid_len;
+	if (ssid)
+		memcpy(cmd->params.ssid, ssid, ssid_len);
+
+	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("cmd scan failed: %d", ret);
+		goto out;
+	}
+
+	wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+	if (cmd->header.status != CMD_STATUS_SUCCESS) {
+		wl1251_error("cmd scan status wasn't success: %d",
+			     cmd->header.status);
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
+{
+	struct wl1251_cmd_trigger_scan_to *cmd;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->timeout = timeout;
+
+	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("cmd trigger scan to failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.h b/drivers/net/wireless/wl12xx/wl1251_cmd.h
index dff798ad0ef5..63ae3193f7c6 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.h
@@ -43,6 +43,9 @@ int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
 			   size_t len);
 int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
 			    void *buf, size_t buf_len);
+int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    unsigned int n_channels, unsigned int n_probes);
+int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout);
 
 /* unit ms */
 #define WL1251_COMMAND_TIMEOUT 2000
@@ -163,8 +166,10 @@ struct cmd_read_write_memory {
 #define CMDMBOX_HEADER_LEN 4
 #define CMDMBOX_INFO_ELEM_HEADER_LEN 4
 
+#define WL1251_SCAN_MIN_DURATION 30000
+#define WL1251_SCAN_MAX_DURATION 60000
 
-struct basic_scan_parameters {
+struct wl1251_scan_parameters {
 	u32 rx_config_options;
 	u32 rx_filter_options;
 
@@ -189,11 +194,11 @@ struct basic_scan_parameters {
 
 	u8 tid_trigger;
 	u8 ssid_len;
-	u32 ssid[8];
+	u8 ssid[32];
 
 } __attribute__ ((packed));
 
-struct basic_scan_channel_parameters {
+struct wl1251_scan_ch_parameters {
 	u32 min_duration; /* in TU */
 	u32 max_duration; /* in TU */
 	u32 bssid_lsb;
@@ -213,11 +218,11 @@ struct basic_scan_channel_parameters {
 /* SCAN parameters */
 #define SCAN_MAX_NUM_OF_CHANNELS 16
 
-struct cmd_scan {
+struct wl1251_cmd_scan {
 	struct wl1251_cmd_header header;
 
-	struct basic_scan_parameters params;
-	struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+	struct wl1251_scan_parameters params;
+	struct wl1251_scan_ch_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
 } __attribute__ ((packed));
 
 enum {
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 6cce86462fac..e038707294a5 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -903,111 +903,13 @@ static int wl1251_build_probe_req(struct wl1251 *wl, u8 *ssid, size_t ssid_len)
 				      size);
 }
 
-static int wl1251_hw_scan(struct wl1251 *wl, u8 *ssid, size_t len,
-			  u8 active_scan, u8 high_prio, u8 num_channels,
-			  u8 probe_requests)
-{
-	struct wl1251_cmd_trigger_scan_to *trigger = NULL;
-	struct cmd_scan *params = NULL;
-	int i, ret;
-	u16 scan_options = 0;
-
-	if (wl->scanning)
-		return -EINVAL;
-
-	params = kzalloc(sizeof(*params), GFP_KERNEL);
-	if (!params)
-		return -ENOMEM;
-
-	params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
-	params->params.rx_filter_options =
-		cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
-
-	/* High priority scan */
-	if (!active_scan)
-		scan_options |= SCAN_PASSIVE;
-	if (high_prio)
-		scan_options |= SCAN_PRIORITY_HIGH;
-	params->params.scan_options = scan_options;
-
-	params->params.num_channels = num_channels;
-	params->params.num_probe_requests = probe_requests;
-	params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
-	params->params.tid_trigger = 0;
-
-	for (i = 0; i < num_channels; i++) {
-		params->channels[i].min_duration = cpu_to_le32(30000);
-		params->channels[i].max_duration = cpu_to_le32(60000);
-		memset(&params->channels[i].bssid_lsb, 0xff, 4);
-		memset(&params->channels[i].bssid_msb, 0xff, 2);
-		params->channels[i].early_termination = 0;
-		params->channels[i].tx_power_att = 0;
-		params->channels[i].channel = i + 1;
-		memset(params->channels[i].pad, 0, 3);
-	}
-
-	for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
-		memset(&params->channels[i], 0,
-		       sizeof(struct basic_scan_channel_parameters));
-
-	if (len && ssid) {
-		params->params.ssid_len = len;
-		memcpy(params->params.ssid, ssid, len);
-	} else {
-		params->params.ssid_len = 0;
-		memset(params->params.ssid, 0, 32);
-	}
-
-	ret = wl1251_build_probe_req(wl, ssid, len);
-	if (ret < 0) {
-		wl1251_error("PROBE request template failed");
-		goto out;
-	}
-
-	trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
-	if (!trigger)
-		goto out;
-
-	trigger->timeout = 0;
-
-	ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
-			      sizeof(*trigger));
-	if (ret < 0) {
-		wl1251_error("trigger scan to failed for hw scan");
-		goto out;
-	}
-
-	wl1251_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
-
-	wl->scanning = true;
-
-	ret = wl1251_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
-	if (ret < 0)
-		wl1251_error("SCAN failed");
-
-	wl1251_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
-
-	if (params->header.status != CMD_STATUS_SUCCESS) {
-		wl1251_error("TEST command answer error: %d",
-			     params->header.status);
-		wl->scanning = false;
-		ret = -EIO;
-		goto out;
-	}
-
-out:
-	kfree(params);
-	return ret;
-
-}
-
 static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 			     struct cfg80211_scan_request *req)
 {
 	struct wl1251 *wl = hw->priv;
-	int ret;
-	u8 *ssid = NULL;
 	size_t ssid_len = 0;
+	u8 *ssid = NULL;
+	int ret;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
 
@@ -1018,12 +920,33 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_lock(&wl->mutex);
 
+	if (wl->scanning) {
+		wl1251_debug(DEBUG_SCAN, "scan already in progress");
+		ret = -EINVAL;
+		goto out;
+	}
+
 	ret = wl1251_ps_elp_wakeup(wl);
 	if (ret < 0)
 		goto out;
 
-	ret = wl1251_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+	ret = wl1251_build_probe_req(wl, ssid, ssid_len);
+	if (ret < 0)
+		wl1251_error("probe request template build failed");
+
+	ret = wl1251_cmd_trigger_scan_to(wl, 0);
+	if (ret < 0)
+		goto out_sleep;
+
+	wl->scanning = true;
 
+	ret = wl1251_cmd_scan(wl, ssid, ssid_len, 13, 3);
+	if (ret < 0) {
+		wl->scanning = false;
+		goto out_sleep;
+	}
+
+out_sleep:
 	wl1251_ps_elp_sleep(wl);
 
 out:
-- 
cgit v1.2.3


From e477c56e852c4c6db1f7665c642c9f45f76616a9 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 5 Jan 2010 20:16:57 +0200
Subject: wl1251: get probe request template from mac80211

Instead of creating the template in driver, get it from mac80211 instead.
Thanks to this, three functions can be now removed.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 86 +++++--------------------------
 1 file changed, 12 insertions(+), 74 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index e038707294a5..1db97229af47 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -831,82 +831,11 @@ out:
 	return ret;
 }
 
-static int wl1251_build_basic_rates(char *rates)
-{
-	u8 index = 0;
-
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-
-	return index;
-}
-
-static int wl1251_build_extended_rates(char *rates)
-{
-	u8 index = 0;
-
-	rates[index++] = IEEE80211_OFDM_RATE_6MB;
-	rates[index++] = IEEE80211_OFDM_RATE_9MB;
-	rates[index++] = IEEE80211_OFDM_RATE_12MB;
-	rates[index++] = IEEE80211_OFDM_RATE_18MB;
-	rates[index++] = IEEE80211_OFDM_RATE_24MB;
-	rates[index++] = IEEE80211_OFDM_RATE_36MB;
-	rates[index++] = IEEE80211_OFDM_RATE_48MB;
-	rates[index++] = IEEE80211_OFDM_RATE_54MB;
-
-	return index;
-}
-
-
-static int wl1251_build_probe_req(struct wl1251 *wl, u8 *ssid, size_t ssid_len)
-{
-	struct wl12xx_probe_req_template template;
-	struct wl12xx_ie_rates *rates;
-	char *ptr;
-	u16 size;
-
-	ptr = (char *)&template;
-	size = sizeof(struct ieee80211_header);
-
-	memset(template.header.da, 0xff, ETH_ALEN);
-	memset(template.header.bssid, 0xff, ETH_ALEN);
-	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
-	template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-
-	/* IEs */
-	/* SSID */
-	template.ssid.header.id = WLAN_EID_SSID;
-	template.ssid.header.len = ssid_len;
-	if (ssid_len && ssid)
-		memcpy(template.ssid.ssid, ssid, ssid_len);
-	size += sizeof(struct wl12xx_ie_header) + ssid_len;
-	ptr += size;
-
-	/* Basic Rates */
-	rates = (struct wl12xx_ie_rates *)ptr;
-	rates->header.id = WLAN_EID_SUPP_RATES;
-	rates->header.len = wl1251_build_basic_rates(rates->rates);
-	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
-	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
-
-	/* Extended rates */
-	rates = (struct wl12xx_ie_rates *)ptr;
-	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
-	rates->header.len = wl1251_build_extended_rates(rates->rates);
-	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
-
-	wl1251_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
-
-	return wl1251_cmd_template_set(wl, CMD_PROBE_REQ, &template,
-				      size);
-}
-
 static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 			     struct cfg80211_scan_request *req)
 {
 	struct wl1251 *wl = hw->priv;
+	struct sk_buff *skb;
 	size_t ssid_len = 0;
 	u8 *ssid = NULL;
 	int ret;
@@ -930,9 +859,18 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out;
 
-	ret = wl1251_build_probe_req(wl, ssid, ssid_len);
+	skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
+				     req->ie, req->ie_len);
+	if (!skb) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data,
+				      skb->len);
+	dev_kfree_skb(skb);
 	if (ret < 0)
-		wl1251_error("probe request template build failed");
+		goto out_sleep;
 
 	ret = wl1251_cmd_trigger_scan_to(wl, 0);
 	if (ret < 0)
-- 
cgit v1.2.3


From dc52f0a8e50303eb67ff8856cd8d1b461462ceec Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 5 Jan 2010 20:17:03 +0200
Subject: wl1251: use mac80211 provided channel parameters in scanning

The number of channels to be used in scan was hard coded in wl1251. The
proper way is to use the channels array provided by mac80211.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_cmd.c  | 3 ++-
 drivers/net/wireless/wl12xx/wl1251_cmd.h  | 5 +++++
 drivers/net/wireless/wl12xx/wl1251_main.c | 3 ++-
 3 files changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.c b/drivers/net/wireless/wl12xx/wl1251_cmd.c
index fcbfbd7585f8..0320b478bb3f 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.c
@@ -412,6 +412,7 @@ out:
 }
 
 int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    struct ieee80211_channel *channels[],
 		    unsigned int n_channels, unsigned int n_probes)
 {
 	struct wl1251_cmd_scan *cmd;
@@ -442,7 +443,7 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 		memset(&cmd->channels[i].bssid_msb, 0xff, 2);
 		cmd->channels[i].early_termination = 0;
 		cmd->channels[i].tx_power_att = 0;
-		cmd->channels[i].channel = i + 1;
+		cmd->channels[i].channel = channels[i]->hw_value;
 	}
 
 	cmd->params.ssid_len = ssid_len;
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.h b/drivers/net/wireless/wl12xx/wl1251_cmd.h
index 63ae3193f7c6..4ad67cae94d2 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.h
@@ -27,6 +27,8 @@
 
 #include "wl1251.h"
 
+#include <net/cfg80211.h>
+
 struct acx_header;
 
 int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len);
@@ -44,6 +46,7 @@ int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
 int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
 			    void *buf, size_t buf_len);
 int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    struct ieee80211_channel *channels[],
 		    unsigned int n_channels, unsigned int n_probes);
 int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout);
 
@@ -169,6 +172,8 @@ struct cmd_read_write_memory {
 #define WL1251_SCAN_MIN_DURATION 30000
 #define WL1251_SCAN_MAX_DURATION 60000
 
+#define WL1251_SCAN_NUM_PROBES 3
+
 struct wl1251_scan_parameters {
 	u32 rx_config_options;
 	u32 rx_filter_options;
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 1db97229af47..4728983b4383 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -878,7 +878,8 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
 
 	wl->scanning = true;
 
-	ret = wl1251_cmd_scan(wl, ssid, ssid_len, 13, 3);
+	ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
+			      req->n_channels, WL1251_SCAN_NUM_PROBES);
 	if (ret < 0) {
 		wl->scanning = false;
 		goto out_sleep;
-- 
cgit v1.2.3


From 80a112ffe8dbada25f3780ecc4beebf23451d755 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 5 Jan 2010 20:17:10 +0200
Subject: wl1251: fix sleep related error paths in wl1251_op_bss_info_changed()

In various cases wl1251_op_bss_info_changed() did not call elp_sleep()
after an error was noticed. Fix it by using correct goto label.

The bug was a theoretical one, in practise it doesn't matter because
if commands start returning errors there will be lots of other problems.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 4728983b4383..f17ce06b6c24 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -946,7 +946,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 					      skb->data, skb->len);
 		dev_kfree_skb(skb);
 		if (ret < 0)
-			goto out;
+			goto out_sleep;
 
 		if (wl->bss_type != BSS_TYPE_IBSS) {
 			ret = wl1251_join(wl, wl->bss_type, wl->channel,
@@ -1018,7 +1018,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
 		if (ret < 0) {
 			wl1251_warning("Set ctsprotect failed %d", ret);
-			goto out;
+			goto out_sleep;
 		}
 	}
 
@@ -1029,7 +1029,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 
 		if (ret < 0) {
 			dev_kfree_skb(beacon);
-			goto out;
+			goto out_sleep;
 		}
 
 		ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
@@ -1038,13 +1038,13 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 		dev_kfree_skb(beacon);
 
 		if (ret < 0)
-			goto out;
+			goto out_sleep;
 
 		ret = wl1251_join(wl, wl->bss_type, wl->beacon_int,
 				  wl->channel, wl->dtim_period);
 
 		if (ret < 0)
-			goto out;
+			goto out_sleep;
 	}
 
 out_sleep:
-- 
cgit v1.2.3


From 81f14df0b3909875902b0253d7059e8a73dd0c7f Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 7 Jan 2010 14:09:27 +0100
Subject: b43: LP-PHY: note and explain specs inconsistency
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_lp.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 3e046ec1ff86..eb4fb4581edb 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -80,6 +80,7 @@ static void b43_lpphy_op_free(struct b43_wldev *dev)
 	dev->phy.lp = NULL;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */
 static void lpphy_read_band_sprom(struct b43_wldev *dev)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
@@ -101,6 +102,12 @@ static void lpphy_read_band_sprom(struct b43_wldev *dev)
 		maxpwr = bus->sprom.maxpwr_bg;
 		lpphy->max_tx_pwr_med_band = maxpwr;
 		cckpo = bus->sprom.cck2gpo;
+		/*
+		 * We don't read SPROM's opo as specs say. On rev8 SPROMs
+		 * opo == ofdm2gpo and we don't know any SSB with LP-PHY
+		 * and SPROM rev below 8.
+		 */
+		B43_WARN_ON(bus->sprom.revision < 8);
 		ofdmpo = bus->sprom.ofdm2gpo;
 		if (cckpo) {
 			for (i = 0; i < 4; i++) {
-- 
cgit v1.2.3


From 0fca65c1c0569d6a143e978b6f4974c519033e63 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:00 +0530
Subject: ath9k: Add a new file for GPIO

Move all LED/RFKILL/BTCOEX related code
to gpio.c

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/Makefile |   1 +
 drivers/net/wireless/ath/ath9k/ath9k.h  |  15 ++
 drivers/net/wireless/ath/ath9k/gpio.c   | 428 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/main.c   | 406 ------------------------------
 4 files changed, 444 insertions(+), 406 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/gpio.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 4985b2b1b0a9..332d6f20c6b6 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,4 +1,5 @@
 ath9k-y +=	beacon.o \
+		gpio.o \
 		main.o \
 		recv.o \
 		xmit.o \
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9efebac5ed0e..bbdca5edcfbf 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -341,6 +341,10 @@ int ath_beaconq_config(struct ath_softc *sc);
 #define ATH_LONG_CALINTERVAL      30000   /* 30 seconds */
 #define ATH_RESTART_CALINTERVAL   1200000 /* 20 minutes */
 
+/**********/
+/* BTCOEX */
+/**********/
+
 /* Defines the BT AR_BT_COEX_WGHT used */
 enum ath_stomp_type {
 	ATH_BTCOEX_NO_STOMP,
@@ -361,6 +365,10 @@ struct ath_btcoex {
 	struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
 };
 
+int ath_init_btcoex_timer(struct ath_softc *sc);
+void ath9k_btcoex_timer_resume(struct ath_softc *sc);
+void ath9k_btcoex_timer_pause(struct ath_softc *sc);
+
 /********************/
 /*   LED Control    */
 /********************/
@@ -385,6 +393,9 @@ struct ath_led {
 	bool registered;
 };
 
+void ath_init_leds(struct ath_softc *sc);
+void ath_deinit_leds(struct ath_softc *sc);
+
 /********************/
 /* Main driver core */
 /********************/
@@ -582,4 +593,8 @@ void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue);
 void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue);
 
 int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
+
+void ath_start_rfkill_poll(struct ath_softc *sc);
+extern void ath9k_rfkill_poll_state(struct ieee80211_hw *hw);
+
 #endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
new file mode 100644
index 000000000000..e204bd25ff65
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+/********************************/
+/*	 LED functions		*/
+/********************************/
+
+static void ath_led_blink_work(struct work_struct *work)
+{
+	struct ath_softc *sc = container_of(work, struct ath_softc,
+					    ath_led_blink_work.work);
+
+	if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
+		return;
+
+	if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
+	    (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
+		ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
+	else
+		ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin,
+				  (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
+
+	ieee80211_queue_delayed_work(sc->hw,
+				     &sc->ath_led_blink_work,
+				     (sc->sc_flags & SC_OP_LED_ON) ?
+					msecs_to_jiffies(sc->led_off_duration) :
+					msecs_to_jiffies(sc->led_on_duration));
+
+	sc->led_on_duration = sc->led_on_cnt ?
+			max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) :
+			ATH_LED_ON_DURATION_IDLE;
+	sc->led_off_duration = sc->led_off_cnt ?
+			max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) :
+			ATH_LED_OFF_DURATION_IDLE;
+	sc->led_on_cnt = sc->led_off_cnt = 0;
+	if (sc->sc_flags & SC_OP_LED_ON)
+		sc->sc_flags &= ~SC_OP_LED_ON;
+	else
+		sc->sc_flags |= SC_OP_LED_ON;
+}
+
+static void ath_led_brightness(struct led_classdev *led_cdev,
+			       enum led_brightness brightness)
+{
+	struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
+	struct ath_softc *sc = led->sc;
+
+	switch (brightness) {
+	case LED_OFF:
+		if (led->led_type == ATH_LED_ASSOC ||
+		    led->led_type == ATH_LED_RADIO) {
+			ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin,
+				(led->led_type == ATH_LED_RADIO));
+			sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
+			if (led->led_type == ATH_LED_RADIO)
+				sc->sc_flags &= ~SC_OP_LED_ON;
+		} else {
+			sc->led_off_cnt++;
+		}
+		break;
+	case LED_FULL:
+		if (led->led_type == ATH_LED_ASSOC) {
+			sc->sc_flags |= SC_OP_LED_ASSOCIATED;
+			ieee80211_queue_delayed_work(sc->hw,
+						     &sc->ath_led_blink_work, 0);
+		} else if (led->led_type == ATH_LED_RADIO) {
+			ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
+			sc->sc_flags |= SC_OP_LED_ON;
+		} else {
+			sc->led_on_cnt++;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
+			    char *trigger)
+{
+	int ret;
+
+	led->sc = sc;
+	led->led_cdev.name = led->name;
+	led->led_cdev.default_trigger = trigger;
+	led->led_cdev.brightness_set = ath_led_brightness;
+
+	ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
+	if (ret)
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Failed to register led:%s", led->name);
+	else
+		led->registered = 1;
+	return ret;
+}
+
+static void ath_unregister_led(struct ath_led *led)
+{
+	if (led->registered) {
+		led_classdev_unregister(&led->led_cdev);
+		led->registered = 0;
+	}
+}
+
+void ath_deinit_leds(struct ath_softc *sc)
+{
+	ath_unregister_led(&sc->assoc_led);
+	sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
+	ath_unregister_led(&sc->tx_led);
+	ath_unregister_led(&sc->rx_led);
+	ath_unregister_led(&sc->radio_led);
+	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
+}
+
+void ath_init_leds(struct ath_softc *sc)
+{
+	char *trigger;
+	int ret;
+
+	if (AR_SREV_9287(sc->sc_ah))
+		sc->sc_ah->led_pin = ATH_LED_PIN_9287;
+	else
+		sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
+
+	/* Configure gpio 1 for output */
+	ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
+			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	/* LED off, active low */
+	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
+
+	INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
+
+	trigger = ieee80211_get_radio_led_name(sc->hw);
+	snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
+		"ath9k-%s::radio", wiphy_name(sc->hw->wiphy));
+	ret = ath_register_led(sc, &sc->radio_led, trigger);
+	sc->radio_led.led_type = ATH_LED_RADIO;
+	if (ret)
+		goto fail;
+
+	trigger = ieee80211_get_assoc_led_name(sc->hw);
+	snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
+		"ath9k-%s::assoc", wiphy_name(sc->hw->wiphy));
+	ret = ath_register_led(sc, &sc->assoc_led, trigger);
+	sc->assoc_led.led_type = ATH_LED_ASSOC;
+	if (ret)
+		goto fail;
+
+	trigger = ieee80211_get_tx_led_name(sc->hw);
+	snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
+		"ath9k-%s::tx", wiphy_name(sc->hw->wiphy));
+	ret = ath_register_led(sc, &sc->tx_led, trigger);
+	sc->tx_led.led_type = ATH_LED_TX;
+	if (ret)
+		goto fail;
+
+	trigger = ieee80211_get_rx_led_name(sc->hw);
+	snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
+		"ath9k-%s::rx", wiphy_name(sc->hw->wiphy));
+	ret = ath_register_led(sc, &sc->rx_led, trigger);
+	sc->rx_led.led_type = ATH_LED_RX;
+	if (ret)
+		goto fail;
+
+	return;
+
+fail:
+	cancel_delayed_work_sync(&sc->ath_led_blink_work);
+	ath_deinit_leds(sc);
+}
+
+/*******************/
+/*	Rfkill	   */
+/*******************/
+
+static bool ath_is_rfkill_set(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	return ath9k_hw_gpio_get(ah, ah->rfkill_gpio) ==
+				  ah->rfkill_polarity;
+}
+
+void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
+{
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	bool blocked = !!ath_is_rfkill_set(sc);
+
+	wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+}
+
+void ath_start_rfkill_poll(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+		wiphy_rfkill_start_polling(sc->hw->wiphy);
+}
+
+/******************/
+/*     BTCOEX     */
+/******************/
+
+/*
+ * Detects if there is any priority bt traffic
+ */
+static void ath_detect_bt_priority(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	if (ath9k_hw_gpio_get(sc->sc_ah, ah->btcoex_hw.btpriority_gpio))
+		btcoex->bt_priority_cnt++;
+
+	if (time_after(jiffies, btcoex->bt_priority_time +
+			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
+		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
+				  "BT priority traffic detected");
+			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
+		} else {
+			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+		}
+
+		btcoex->bt_priority_cnt = 0;
+		btcoex->bt_priority_time = jiffies;
+	}
+}
+
+/*
+ * Configures appropriate weight based on stomp type.
+ */
+static void ath9k_btcoex_bt_stomp(struct ath_softc *sc,
+				  enum ath_stomp_type stomp_type)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	switch (stomp_type) {
+	case ATH_BTCOEX_STOMP_ALL:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_ALL_WLAN_WGHT);
+		break;
+	case ATH_BTCOEX_STOMP_LOW:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_LOW_WLAN_WGHT);
+		break;
+	case ATH_BTCOEX_STOMP_NONE:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_NONE_WLAN_WGHT);
+		break;
+	default:
+		ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+			  "Invalid Stomptype\n");
+		break;
+	}
+
+	ath9k_hw_btcoex_enable(ah);
+}
+
+static void ath9k_gen_timer_start(struct ath_hw *ah,
+				  struct ath_gen_timer *timer,
+				  u32 timer_next,
+				  u32 timer_period)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	ath9k_hw_gen_timer_start(ah, timer, timer_next, timer_period);
+
+	if ((sc->imask & ATH9K_INT_GENTIMER) == 0) {
+		ath9k_hw_set_interrupts(ah, 0);
+		sc->imask |= ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+}
+
+static void ath9k_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+
+	ath9k_hw_gen_timer_stop(ah, timer);
+
+	/* if no timer is enabled, turn off interrupt mask */
+	if (timer_table->timer_mask.val == 0) {
+		ath9k_hw_set_interrupts(ah, 0);
+		sc->imask &= ~ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+}
+
+/*
+ * This is the master bt coex timer which runs for every
+ * 45ms, bt traffic will be given priority during 55% of this
+ * period while wlan gets remaining 45%
+ */
+static void ath_btcoex_period_timer(unsigned long data)
+{
+	struct ath_softc *sc = (struct ath_softc *) data;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	ath_detect_bt_priority(sc);
+
+	spin_lock_bh(&btcoex->btcoex_lock);
+
+	ath9k_btcoex_bt_stomp(sc, btcoex->bt_stomp_type);
+
+	spin_unlock_bh(&btcoex->btcoex_lock);
+
+	if (btcoex->btcoex_period != btcoex->btcoex_no_stomp) {
+		if (btcoex->hw_timer_enabled)
+			ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
+
+		ath9k_gen_timer_start(ah,
+				      btcoex->no_stomp_timer,
+				      (ath9k_hw_gettsf32(ah) +
+				       btcoex->btcoex_no_stomp),
+				       btcoex->btcoex_no_stomp * 10);
+		btcoex->hw_timer_enabled = true;
+	}
+
+	mod_timer(&btcoex->period_timer, jiffies +
+				  msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
+}
+
+/*
+ * Generic tsf based hw timer which configures weight
+ * registers to time slice between wlan and bt traffic
+ */
+static void ath_btcoex_no_stomp_timer(void *arg)
+{
+	struct ath_softc *sc = (struct ath_softc *)arg;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		  "no stomp timer running \n");
+
+	spin_lock_bh(&btcoex->btcoex_lock);
+
+	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
+		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_NONE);
+	 else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_LOW);
+
+	spin_unlock_bh(&btcoex->btcoex_lock);
+}
+
+int ath_init_btcoex_timer(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
+	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
+		btcoex->btcoex_period / 100;
+
+	setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
+			(unsigned long) sc);
+
+	spin_lock_init(&btcoex->btcoex_lock);
+
+	btcoex->no_stomp_timer = ath_gen_timer_alloc(sc->sc_ah,
+			ath_btcoex_no_stomp_timer,
+			ath_btcoex_no_stomp_timer,
+			(void *) sc, AR_FIRST_NDP_TIMER);
+
+	if (!btcoex->no_stomp_timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * (Re)start btcoex timers
+ */
+void ath9k_btcoex_timer_resume(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		  "Starting btcoex timers");
+
+	/* make sure duty cycle timer is also stopped when resuming */
+	if (btcoex->hw_timer_enabled)
+		ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+
+	btcoex->bt_priority_cnt = 0;
+	btcoex->bt_priority_time = jiffies;
+	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+
+	mod_timer(&btcoex->period_timer, jiffies);
+}
+
+
+/*
+ * Pause btcoex timer and bt duty cycle timer
+ */
+void ath9k_btcoex_timer_pause(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	del_timer_sync(&btcoex->period_timer);
+
+	if (btcoex->hw_timer_enabled)
+		ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
+
+	btcoex->hw_timer_enabled = false;
+}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3777b8449789..31a33cf762da 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1000,174 +1000,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 	}
 }
 
-/********************************/
-/*	 LED functions		*/
-/********************************/
-
-static void ath_led_blink_work(struct work_struct *work)
-{
-	struct ath_softc *sc = container_of(work, struct ath_softc,
-					    ath_led_blink_work.work);
-
-	if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
-		return;
-
-	if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
-	    (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
-		ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
-	else
-		ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin,
-				  (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
-
-	ieee80211_queue_delayed_work(sc->hw,
-				     &sc->ath_led_blink_work,
-				     (sc->sc_flags & SC_OP_LED_ON) ?
-					msecs_to_jiffies(sc->led_off_duration) :
-					msecs_to_jiffies(sc->led_on_duration));
-
-	sc->led_on_duration = sc->led_on_cnt ?
-			max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) :
-			ATH_LED_ON_DURATION_IDLE;
-	sc->led_off_duration = sc->led_off_cnt ?
-			max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) :
-			ATH_LED_OFF_DURATION_IDLE;
-	sc->led_on_cnt = sc->led_off_cnt = 0;
-	if (sc->sc_flags & SC_OP_LED_ON)
-		sc->sc_flags &= ~SC_OP_LED_ON;
-	else
-		sc->sc_flags |= SC_OP_LED_ON;
-}
-
-static void ath_led_brightness(struct led_classdev *led_cdev,
-			       enum led_brightness brightness)
-{
-	struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
-	struct ath_softc *sc = led->sc;
-
-	switch (brightness) {
-	case LED_OFF:
-		if (led->led_type == ATH_LED_ASSOC ||
-		    led->led_type == ATH_LED_RADIO) {
-			ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin,
-				(led->led_type == ATH_LED_RADIO));
-			sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-			if (led->led_type == ATH_LED_RADIO)
-				sc->sc_flags &= ~SC_OP_LED_ON;
-		} else {
-			sc->led_off_cnt++;
-		}
-		break;
-	case LED_FULL:
-		if (led->led_type == ATH_LED_ASSOC) {
-			sc->sc_flags |= SC_OP_LED_ASSOCIATED;
-			ieee80211_queue_delayed_work(sc->hw,
-						     &sc->ath_led_blink_work, 0);
-		} else if (led->led_type == ATH_LED_RADIO) {
-			ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
-			sc->sc_flags |= SC_OP_LED_ON;
-		} else {
-			sc->led_on_cnt++;
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
-			    char *trigger)
-{
-	int ret;
-
-	led->sc = sc;
-	led->led_cdev.name = led->name;
-	led->led_cdev.default_trigger = trigger;
-	led->led_cdev.brightness_set = ath_led_brightness;
-
-	ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
-	if (ret)
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Failed to register led:%s", led->name);
-	else
-		led->registered = 1;
-	return ret;
-}
-
-static void ath_unregister_led(struct ath_led *led)
-{
-	if (led->registered) {
-		led_classdev_unregister(&led->led_cdev);
-		led->registered = 0;
-	}
-}
-
-static void ath_deinit_leds(struct ath_softc *sc)
-{
-	ath_unregister_led(&sc->assoc_led);
-	sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-	ath_unregister_led(&sc->tx_led);
-	ath_unregister_led(&sc->rx_led);
-	ath_unregister_led(&sc->radio_led);
-	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-}
-
-static void ath_init_leds(struct ath_softc *sc)
-{
-	char *trigger;
-	int ret;
-
-	if (AR_SREV_9287(sc->sc_ah))
-		sc->sc_ah->led_pin = ATH_LED_PIN_9287;
-	else
-		sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
-
-	/* Configure gpio 1 for output */
-	ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	/* LED off, active low */
-	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
-	INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
-
-	trigger = ieee80211_get_radio_led_name(sc->hw);
-	snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
-		"ath9k-%s::radio", wiphy_name(sc->hw->wiphy));
-	ret = ath_register_led(sc, &sc->radio_led, trigger);
-	sc->radio_led.led_type = ATH_LED_RADIO;
-	if (ret)
-		goto fail;
-
-	trigger = ieee80211_get_assoc_led_name(sc->hw);
-	snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
-		"ath9k-%s::assoc", wiphy_name(sc->hw->wiphy));
-	ret = ath_register_led(sc, &sc->assoc_led, trigger);
-	sc->assoc_led.led_type = ATH_LED_ASSOC;
-	if (ret)
-		goto fail;
-
-	trigger = ieee80211_get_tx_led_name(sc->hw);
-	snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
-		"ath9k-%s::tx", wiphy_name(sc->hw->wiphy));
-	ret = ath_register_led(sc, &sc->tx_led, trigger);
-	sc->tx_led.led_type = ATH_LED_TX;
-	if (ret)
-		goto fail;
-
-	trigger = ieee80211_get_rx_led_name(sc->hw);
-	snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
-		"ath9k-%s::rx", wiphy_name(sc->hw->wiphy));
-	ret = ath_register_led(sc, &sc->rx_led, trigger);
-	sc->rx_led.led_type = ATH_LED_RX;
-	if (ret)
-		goto fail;
-
-	return;
-
-fail:
-	cancel_delayed_work_sync(&sc->ath_led_blink_work);
-	ath_deinit_leds(sc);
-}
-
 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_hw *ah = sc->sc_ah;
@@ -1252,35 +1084,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 }
 
-/*******************/
-/*	Rfkill	   */
-/*******************/
-
-static bool ath_is_rfkill_set(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	return ath9k_hw_gpio_get(ah, ah->rfkill_gpio) ==
-				  ah->rfkill_polarity;
-}
-
-static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
-{
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	bool blocked = !!ath_is_rfkill_set(sc);
-
-	wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
-}
-
-static void ath_start_rfkill_poll(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		wiphy_rfkill_start_polling(sc->hw->wiphy);
-}
-
 static void ath9k_uninit_hw(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
@@ -1364,177 +1167,6 @@ static int ath9k_reg_notifier(struct wiphy *wiphy,
 	return ath_reg_notifier_apply(wiphy, request, reg);
 }
 
-/*
- * Detects if there is any priority bt traffic
- */
-static void ath_detect_bt_priority(struct ath_softc *sc)
-{
-	struct ath_btcoex *btcoex = &sc->btcoex;
-	struct ath_hw *ah = sc->sc_ah;
-
-	if (ath9k_hw_gpio_get(sc->sc_ah, ah->btcoex_hw.btpriority_gpio))
-		btcoex->bt_priority_cnt++;
-
-	if (time_after(jiffies, btcoex->bt_priority_time +
-			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
-		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
-			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
-				  "BT priority traffic detected");
-			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
-		} else {
-			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
-		}
-
-		btcoex->bt_priority_cnt = 0;
-		btcoex->bt_priority_time = jiffies;
-	}
-}
-
-/*
- * Configures appropriate weight based on stomp type.
- */
-static void ath9k_btcoex_bt_stomp(struct ath_softc *sc,
-				  enum ath_stomp_type stomp_type)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	switch (stomp_type) {
-	case ATH_BTCOEX_STOMP_ALL:
-		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
-					   AR_STOMP_ALL_WLAN_WGHT);
-		break;
-	case ATH_BTCOEX_STOMP_LOW:
-		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
-					   AR_STOMP_LOW_WLAN_WGHT);
-		break;
-	case ATH_BTCOEX_STOMP_NONE:
-		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
-					   AR_STOMP_NONE_WLAN_WGHT);
-		break;
-	default:
-		ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-			  "Invalid Stomptype\n");
-		break;
-	}
-
-	ath9k_hw_btcoex_enable(ah);
-}
-
-static void ath9k_gen_timer_start(struct ath_hw *ah,
-				  struct ath_gen_timer *timer,
-				  u32 timer_next,
-				  u32 timer_period)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-
-	ath9k_hw_gen_timer_start(ah, timer, timer_next, timer_period);
-
-	if ((sc->imask & ATH9K_INT_GENTIMER) == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
-		sc->imask |= ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah, sc->imask);
-	}
-}
-
-static void ath9k_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
-
-	ath9k_hw_gen_timer_stop(ah, timer);
-
-	/* if no timer is enabled, turn off interrupt mask */
-	if (timer_table->timer_mask.val == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
-		sc->imask &= ~ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah, sc->imask);
-	}
-}
-
-/*
- * This is the master bt coex timer which runs for every
- * 45ms, bt traffic will be given priority during 55% of this
- * period while wlan gets remaining 45%
- */
-static void ath_btcoex_period_timer(unsigned long data)
-{
-	struct ath_softc *sc = (struct ath_softc *) data;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_btcoex *btcoex = &sc->btcoex;
-
-	ath_detect_bt_priority(sc);
-
-	spin_lock_bh(&btcoex->btcoex_lock);
-
-	ath9k_btcoex_bt_stomp(sc, btcoex->bt_stomp_type);
-
-	spin_unlock_bh(&btcoex->btcoex_lock);
-
-	if (btcoex->btcoex_period != btcoex->btcoex_no_stomp) {
-		if (btcoex->hw_timer_enabled)
-			ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
-
-		ath9k_gen_timer_start(ah,
-				      btcoex->no_stomp_timer,
-				      (ath9k_hw_gettsf32(ah) +
-				       btcoex->btcoex_no_stomp),
-				       btcoex->btcoex_no_stomp * 10);
-		btcoex->hw_timer_enabled = true;
-	}
-
-	mod_timer(&btcoex->period_timer, jiffies +
-				  msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
-}
-
-/*
- * Generic tsf based hw timer which configures weight
- * registers to time slice between wlan and bt traffic
- */
-static void ath_btcoex_no_stomp_timer(void *arg)
-{
-	struct ath_softc *sc = (struct ath_softc *)arg;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_btcoex *btcoex = &sc->btcoex;
-
-	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-		  "no stomp timer running \n");
-
-	spin_lock_bh(&btcoex->btcoex_lock);
-
-	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
-		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_NONE);
-	 else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
-		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_LOW);
-
-	spin_unlock_bh(&btcoex->btcoex_lock);
-}
-
-static int ath_init_btcoex_timer(struct ath_softc *sc)
-{
-	struct ath_btcoex *btcoex = &sc->btcoex;
-
-	btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
-	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
-		btcoex->btcoex_period / 100;
-
-	setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
-			(unsigned long) sc);
-
-	spin_lock_init(&btcoex->btcoex_lock);
-
-	btcoex->no_stomp_timer = ath_gen_timer_alloc(sc->sc_ah,
-			ath_btcoex_no_stomp_timer,
-			ath_btcoex_no_stomp_timer,
-			(void *) sc, AR_FIRST_NDP_TIMER);
-
-	if (!btcoex->no_stomp_timer)
-		return -ENOMEM;
-
-	return 0;
-}
-
 /*
  * Read and write, they both share the same lock. We do this to serialize
  * reads and writes on Atheros 802.11n PCI devices only. This is required
@@ -2213,28 +1845,6 @@ void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
 /* mac80211 callbacks */
 /**********************/
 
-/*
- * (Re)start btcoex timers
- */
-static void ath9k_btcoex_timer_resume(struct ath_softc *sc)
-{
-	struct ath_btcoex *btcoex = &sc->btcoex;
-	struct ath_hw *ah = sc->sc_ah;
-
-	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-		  "Starting btcoex timers");
-
-	/* make sure duty cycle timer is also stopped when resuming */
-	if (btcoex->hw_timer_enabled)
-		ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
-
-	btcoex->bt_priority_cnt = 0;
-	btcoex->bt_priority_time = jiffies;
-	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
-
-	mod_timer(&btcoex->period_timer, jiffies);
-}
-
 static int ath9k_start(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
@@ -2461,22 +2071,6 @@ exit:
 	return 0;
 }
 
-/*
- * Pause btcoex timer and bt duty cycle timer
- */
-static void ath9k_btcoex_timer_pause(struct ath_softc *sc)
-{
-	struct ath_btcoex *btcoex = &sc->btcoex;
-	struct ath_hw *ah = sc->sc_ah;
-
-	del_timer_sync(&btcoex->period_timer);
-
-	if (btcoex->hw_timer_enabled)
-		ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
-
-	btcoex->hw_timer_enabled = false;
-}
-
 static void ath9k_stop(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
-- 
cgit v1.2.3


From 556242049cc3992d0ee625e9f15c4b00ea4baac8 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:02 +0530
Subject: ath9k: Add new file init.c

Move initialization/de-initialization related
code to this file.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/Makefile |   1 +
 drivers/net/wireless/ath/ath9k/ath9k.h  |   5 +
 drivers/net/wireless/ath/ath9k/init.c   | 856 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/main.c   | 842 +------------------------------
 4 files changed, 865 insertions(+), 839 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/init.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 332d6f20c6b6..6b50d5eb9ec3 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,5 +1,6 @@
 ath9k-y +=	beacon.o \
 		gpio.o \
+		init.o \
 		main.o \
 		recv.o \
 		xmit.o \
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bbdca5edcfbf..68a423054e6c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -341,6 +341,8 @@ int ath_beaconq_config(struct ath_softc *sc);
 #define ATH_LONG_CALINTERVAL      30000   /* 30 seconds */
 #define ATH_RESTART_CALINTERVAL   1200000 /* 20 minutes */
 
+void ath_ani_calibrate(unsigned long data);
+
 /**********/
 /* BTCOEX */
 /**********/
@@ -519,6 +521,7 @@ struct ath_wiphy {
 	int chan_is_ht;
 };
 
+void ath9k_tasklet(unsigned long data);
 int ath_reset(struct ath_softc *sc, bool retry_tx);
 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
@@ -535,6 +538,7 @@ static inline void ath_bus_cleanup(struct ath_common *common)
 }
 
 extern struct ieee80211_ops ath9k_ops;
+extern int modparam_nohwcrypt;
 
 irqreturn_t ath_isr(int irq, void *dev);
 void ath_cleanup(struct ath_softc *sc);
@@ -552,6 +556,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 
 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw);
 void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
+bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode);
 
 #ifdef CONFIG_PCI
 int ath_pci_init(void);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
new file mode 100644
index 000000000000..2bea0892918e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -0,0 +1,856 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static char *dev_info = "ath9k";
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
+module_param_named(debug, ath9k_debug, uint, 0);
+MODULE_PARM_DESC(debug, "Debugging mask");
+
+int modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
+
+/* We use the hw_value as an index into our private channel structure */
+
+#define CHAN2G(_freq, _idx)  { \
+	.center_freq = (_freq), \
+	.hw_value = (_idx), \
+	.max_power = 20, \
+}
+
+#define CHAN5G(_freq, _idx) { \
+	.band = IEEE80211_BAND_5GHZ, \
+	.center_freq = (_freq), \
+	.hw_value = (_idx), \
+	.max_power = 20, \
+}
+
+/* Some 2 GHz radios are actually tunable on 2312-2732
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static struct ieee80211_channel ath9k_2ghz_chantable[] = {
+	CHAN2G(2412, 0), /* Channel 1 */
+	CHAN2G(2417, 1), /* Channel 2 */
+	CHAN2G(2422, 2), /* Channel 3 */
+	CHAN2G(2427, 3), /* Channel 4 */
+	CHAN2G(2432, 4), /* Channel 5 */
+	CHAN2G(2437, 5), /* Channel 6 */
+	CHAN2G(2442, 6), /* Channel 7 */
+	CHAN2G(2447, 7), /* Channel 8 */
+	CHAN2G(2452, 8), /* Channel 9 */
+	CHAN2G(2457, 9), /* Channel 10 */
+	CHAN2G(2462, 10), /* Channel 11 */
+	CHAN2G(2467, 11), /* Channel 12 */
+	CHAN2G(2472, 12), /* Channel 13 */
+	CHAN2G(2484, 13), /* Channel 14 */
+};
+
+/* Some 5 GHz radios are actually tunable on XXXX-YYYY
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static struct ieee80211_channel ath9k_5ghz_chantable[] = {
+	/* _We_ call this UNII 1 */
+	CHAN5G(5180, 14), /* Channel 36 */
+	CHAN5G(5200, 15), /* Channel 40 */
+	CHAN5G(5220, 16), /* Channel 44 */
+	CHAN5G(5240, 17), /* Channel 48 */
+	/* _We_ call this UNII 2 */
+	CHAN5G(5260, 18), /* Channel 52 */
+	CHAN5G(5280, 19), /* Channel 56 */
+	CHAN5G(5300, 20), /* Channel 60 */
+	CHAN5G(5320, 21), /* Channel 64 */
+	/* _We_ call this "Middle band" */
+	CHAN5G(5500, 22), /* Channel 100 */
+	CHAN5G(5520, 23), /* Channel 104 */
+	CHAN5G(5540, 24), /* Channel 108 */
+	CHAN5G(5560, 25), /* Channel 112 */
+	CHAN5G(5580, 26), /* Channel 116 */
+	CHAN5G(5600, 27), /* Channel 120 */
+	CHAN5G(5620, 28), /* Channel 124 */
+	CHAN5G(5640, 29), /* Channel 128 */
+	CHAN5G(5660, 30), /* Channel 132 */
+	CHAN5G(5680, 31), /* Channel 136 */
+	CHAN5G(5700, 32), /* Channel 140 */
+	/* _We_ call this UNII 3 */
+	CHAN5G(5745, 33), /* Channel 149 */
+	CHAN5G(5765, 34), /* Channel 153 */
+	CHAN5G(5785, 35), /* Channel 157 */
+	CHAN5G(5805, 36), /* Channel 161 */
+	CHAN5G(5825, 37), /* Channel 165 */
+};
+
+/* Atheros hardware rate code addition for short premble */
+#define SHPCHECK(__hw_rate, __flags) \
+	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
+
+#define RATE(_bitrate, _hw_rate, _flags) {              \
+	.bitrate        = (_bitrate),                   \
+	.flags          = (_flags),                     \
+	.hw_value       = (_hw_rate),                   \
+	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
+}
+
+static struct ieee80211_rate ath9k_legacy_rates[] = {
+	RATE(10, 0x1b, 0),
+	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(60, 0x0b, 0),
+	RATE(90, 0x0f, 0),
+	RATE(120, 0x0a, 0),
+	RATE(180, 0x0e, 0),
+	RATE(240, 0x09, 0),
+	RATE(360, 0x0d, 0),
+	RATE(480, 0x08, 0),
+	RATE(540, 0x0c, 0),
+};
+
+static void ath9k_uninit_hw(struct ath_softc *sc);
+
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests.
+ */
+
+static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		iowrite32(val, sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, sc->mem + reg_offset);
+}
+
+static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	u32 val;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		val = ioread32(sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(sc->mem + reg_offset);
+	return val;
+}
+
+static const struct ath_ops ath9k_common_ops = {
+	.read = ath9k_ioread32,
+	.write = ath9k_iowrite32,
+};
+
+/**************************/
+/*     Initialization     */
+/**************************/
+
+static void setup_ht_cap(struct ath_softc *sc,
+			 struct ieee80211_sta_ht_cap *ht_info)
+{
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	u8 tx_streams, rx_streams;
+
+	ht_info->ht_supported = true;
+	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+		       IEEE80211_HT_CAP_SM_PS |
+		       IEEE80211_HT_CAP_SGI_40 |
+		       IEEE80211_HT_CAP_DSSSCCK40;
+
+	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+
+	/* set up supported mcs set */
+	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+	tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
+		     1 : 2;
+	rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
+		     1 : 2;
+
+	if (tx_streams != rx_streams) {
+		ath_print(common, ATH_DBG_CONFIG,
+			  "TX streams %d, RX streams: %d\n",
+			  tx_streams, rx_streams);
+		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+	}
+
+	ht_info->mcs.rx_mask[0] = 0xff;
+	if (rx_streams >= 2)
+		ht_info->mcs.rx_mask[1] = 0xff;
+
+	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+}
+
+static int ath9k_reg_notifier(struct wiphy *wiphy,
+			      struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
+
+	return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
+/*
+ *  This function will allocate both the DMA descriptor structure, and the
+ *  buffers it contains.  These are used to contain the descriptors used
+ *  by the system.
+*/
+int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
+		      struct list_head *head, const char *name,
+		      int nbuf, int ndesc)
+{
+#define	DS2PHYS(_dd, _ds)						\
+	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
+#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
+#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct ath_desc *ds;
+	struct ath_buf *bf;
+	int i, bsize, error;
+
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
+		  name, nbuf, ndesc);
+
+	INIT_LIST_HEAD(head);
+	/* ath_desc must be a multiple of DWORDs */
+	if ((sizeof(struct ath_desc) % 4) != 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "ath_desc not DWORD aligned\n");
+		BUG_ON((sizeof(struct ath_desc) % 4) != 0);
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
+
+	/*
+	 * Need additional DMA memory because we can't use
+	 * descriptors that cross the 4K page boundary. Assume
+	 * one skipped descriptor per 4K page.
+	 */
+	if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+		u32 ndesc_skipped =
+			ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
+		u32 dma_len;
+
+		while (ndesc_skipped) {
+			dma_len = ndesc_skipped * sizeof(struct ath_desc);
+			dd->dd_desc_len += dma_len;
+
+			ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
+		};
+	}
+
+	/* allocate descriptors */
+	dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
+					 &dd->dd_desc_paddr, GFP_KERNEL);
+	if (dd->dd_desc == NULL) {
+		error = -ENOMEM;
+		goto fail;
+	}
+	ds = dd->dd_desc;
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
+		  name, ds, (u32) dd->dd_desc_len,
+		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+
+	/* allocate buffers */
+	bsize = sizeof(struct ath_buf) * nbuf;
+	bf = kzalloc(bsize, GFP_KERNEL);
+	if (bf == NULL) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+	dd->dd_bufptr = bf;
+
+	for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
+		bf->bf_desc = ds;
+		bf->bf_daddr = DS2PHYS(dd, ds);
+
+		if (!(sc->sc_ah->caps.hw_caps &
+		      ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+			/*
+			 * Skip descriptor addresses which can cause 4KB
+			 * boundary crossing (addr + length) with a 32 dword
+			 * descriptor fetch.
+			 */
+			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+				BUG_ON((caddr_t) bf->bf_desc >=
+				       ((caddr_t) dd->dd_desc +
+					dd->dd_desc_len));
+
+				ds += ndesc;
+				bf->bf_desc = ds;
+				bf->bf_daddr = DS2PHYS(dd, ds);
+			}
+		}
+		list_add_tail(&bf->list, head);
+	}
+	return 0;
+fail2:
+	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
+			  dd->dd_desc_paddr);
+fail:
+	memset(dd, 0, sizeof(*dd));
+	return error;
+#undef ATH_DESC_4KB_BOUND_CHECK
+#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
+#undef DS2PHYS
+}
+
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
+			  const struct ath_bus_ops *bus_ops)
+{
+	struct ath_hw *ah = NULL;
+	struct ath_common *common;
+	int r = 0, i;
+	int csz = 0;
+	int qnum;
+
+	/* XXX: hardware will not be ready until ath_open() being called */
+	sc->sc_flags |= SC_OP_INVALID;
+
+	spin_lock_init(&sc->wiphy_lock);
+	spin_lock_init(&sc->sc_resetlock);
+	spin_lock_init(&sc->sc_serial_rw);
+	spin_lock_init(&sc->sc_pm_lock);
+	mutex_init(&sc->mutex);
+	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
+		     (unsigned long)sc);
+
+	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
+	if (!ah)
+		return -ENOMEM;
+
+	ah->hw_version.devid = devid;
+	ah->hw_version.subsysid = subsysid;
+	sc->sc_ah = ah;
+
+	common = ath9k_hw_common(ah);
+	common->ops = &ath9k_common_ops;
+	common->bus_ops = bus_ops;
+	common->ah = ah;
+	common->hw = sc->hw;
+	common->priv = sc;
+	common->debug_mask = ath9k_debug;
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	ath_read_cachesize(common, &csz);
+	/* XXX assert csz is non-zero */
+	common->cachelsz = csz << 2;	/* convert to bytes */
+
+	r = ath9k_hw_init(ah);
+	if (r) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to initialize hardware; "
+			  "initialization status: %d\n", r);
+		goto bad_free_hw;
+	}
+
+	if (ath9k_init_debug(ah) < 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to create debugfs files\n");
+		goto bad_free_hw;
+	}
+
+	/* Get the hardware key cache size. */
+	common->keymax = ah->caps.keycache_size;
+	if (common->keymax > ATH_KEYMAX) {
+		ath_print(common, ATH_DBG_ANY,
+			  "Warning, using only %u entries in %u key cache\n",
+			  ATH_KEYMAX, common->keymax);
+		common->keymax = ATH_KEYMAX;
+	}
+
+	/*
+	 * Reset the key cache since some parts do not
+	 * reset the contents on initial power up.
+	 */
+	for (i = 0; i < common->keymax; i++)
+		ath9k_hw_keyreset(ah, (u16) i);
+
+	/* default to MONITOR mode */
+	sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+
+	/*
+	 * Allocate hardware transmit queues: one queue for
+	 * beacon frames and one data queue for each QoS
+	 * priority.  Note that the hal handles reseting
+	 * these queues at the needed time.
+	 */
+	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
+	if (sc->beacon.beaconq == -1) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup a beacon xmit queue\n");
+		r = -EIO;
+		goto bad2;
+	}
+	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
+	if (sc->beacon.cabq == NULL) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup CAB xmit queue\n");
+		r = -EIO;
+		goto bad2;
+	}
+
+	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
+	ath_cabq_update(sc);
+
+	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
+		sc->tx.hwq_map[i] = -1;
+
+	/* Setup data queues */
+	/* NB: ensure BK queue is the lowest priority h/w queue */
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BK traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BE traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VI traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VO traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+
+	/* Initializes the noise floor to a reasonable default value.
+	 * Later on this will be updated during ANI processing. */
+
+	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
+	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
+
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)) {
+		/*
+		 * Whether we should enable h/w TKIP MIC.
+		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
+		 * report WMM capable, so it's always safe to turn on
+		 * TKIP MIC in this case.
+		 */
+		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
+				       0, 1, NULL);
+	}
+
+	/*
+	 * Check whether the separate key cache entries
+	 * are required to handle both tx+rx MIC keys.
+	 * With split mic keys the number of stations is limited
+	 * to 27 otherwise 59.
+	 */
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				      ATH9K_CIPHER_MIC, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+				      0, NULL))
+		common->splitmic = 1;
+
+	/* turn on mcast key search if possible */
+	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
+					     1, NULL);
+
+	sc->config.txpowlimit = ATH_TXPOWER_MAX;
+
+	/* 11n Capabilities */
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		sc->sc_flags |= SC_OP_TXAGGR;
+		sc->sc_flags |= SC_OP_RXAGGR;
+	}
+
+	common->tx_chainmask = ah->caps.tx_chainmask;
+	common->rx_chainmask = ah->caps.rx_chainmask;
+
+	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+	sc->rx.defant = ath9k_hw_getdefantenna(ah);
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
+
+	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
+
+	/* initialize beacon slots */
+	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
+		sc->beacon.bslot[i] = NULL;
+		sc->beacon.bslot_aphy[i] = NULL;
+	}
+
+	/* setup channels and rates */
+
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
+			ARRAY_SIZE(ath9k_2ghz_chantable);
+		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates);
+	}
+
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
+		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
+			ARRAY_SIZE(ath9k_5ghz_chantable);
+		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			ath9k_legacy_rates + 4;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates) - 4;
+	}
+
+	switch (ah->btcoex_hw.scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_init_2wire(ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_init_3wire(ah);
+		r = ath_init_btcoex_timer(sc);
+		if (r)
+			goto bad2;
+		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+		ath9k_hw_init_btcoex_hw(ah, qnum);
+		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	return 0;
+bad2:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+bad_free_hw:
+	ath9k_uninit_hw(sc);
+	return r;
+}
+
+void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+{
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+		IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_AMPDU_AGGREGATION |
+		IEEE80211_HW_SUPPORTS_PS |
+		IEEE80211_HW_PS_NULLFUNC_STACK |
+		IEEE80211_HW_SPECTRUM_MGMT;
+
+	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
+		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
+
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_MESH_POINT);
+
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+	hw->queues = 4;
+	hw->max_rates = 4;
+	hw->channel_change_time = 5000;
+	hw->max_listen_interval = 10;
+	/* Hardware supports 10 but we use 4 */
+	hw->max_rate_tries = 4;
+	hw->sta_data_size = sizeof(struct ath_node);
+	hw->vif_data_size = sizeof(struct ath_vif);
+
+	hw->rate_control_algorithm = "ath9k_rate_control";
+
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
+		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&sc->sbands[IEEE80211_BAND_2GHZ];
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
+		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&sc->sbands[IEEE80211_BAND_5GHZ];
+}
+
+/* Device driver core initialization */
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+		    const struct ath_bus_ops *bus_ops)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_common *common;
+	struct ath_hw *ah;
+	int error = 0, i;
+	struct ath_regulatory *reg;
+
+	dev_dbg(sc->dev, "Attach ATH hw\n");
+
+	error = ath_init_softc(devid, sc, subsysid, bus_ops);
+	if (error != 0)
+		return error;
+
+	ah = sc->sc_ah;
+	common = ath9k_hw_common(ah);
+
+	/* get mac address from hardware and set in mac80211 */
+
+	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
+
+	ath_set_hw_capab(sc, hw);
+
+	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
+			      ath9k_reg_notifier);
+	if (error)
+		return error;
+
+	reg = &common->regulatory;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
+			setup_ht_cap(sc,
+				     &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
+			setup_ht_cap(sc,
+				     &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+	}
+
+	/* initialize tx/rx engine */
+	error = ath_tx_init(sc, ATH_TXBUF);
+	if (error != 0)
+		goto error_attach;
+
+	error = ath_rx_init(sc, ATH_RXBUF);
+	if (error != 0)
+		goto error_attach;
+
+	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
+	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
+	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
+
+	error = ieee80211_register_hw(hw);
+
+	if (!ath_is_world_regd(reg)) {
+		error = regulatory_hint(hw->wiphy, reg->alpha2);
+		if (error)
+			goto error_attach;
+	}
+
+	/* Initialize LED control */
+	ath_init_leds(sc);
+
+	ath_start_rfkill_poll(sc);
+
+	return 0;
+
+error_attach:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+	ath9k_uninit_hw(sc);
+
+	return error;
+}
+
+/*****************************/
+/*     De-Initialization     */
+/*****************************/
+
+static void ath9k_uninit_hw(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	BUG_ON(!ah);
+
+	ath9k_exit_debug(ah);
+	ath9k_hw_detach(ah);
+	sc->sc_ah = NULL;
+}
+
+static void ath_clean_core(struct ath_softc *sc)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_hw *ah = sc->sc_ah;
+	int i = 0;
+
+	ath9k_ps_wakeup(sc);
+
+	dev_dbg(sc->dev, "Detach ATH hw\n");
+
+	ath_deinit_leds(sc);
+	wiphy_rfkill_stop_polling(sc->hw->wiphy);
+
+	for (i = 0; i < sc->num_sec_wiphy; i++) {
+		struct ath_wiphy *aphy = sc->sec_wiphy[i];
+		if (aphy == NULL)
+			continue;
+		sc->sec_wiphy[i] = NULL;
+		ieee80211_unregister_hw(aphy->hw);
+		ieee80211_free_hw(aphy->hw);
+	}
+	ieee80211_unregister_hw(hw);
+	ath_rx_cleanup(sc);
+	ath_tx_cleanup(sc);
+
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
+
+	if (!(sc->sc_flags & SC_OP_INVALID))
+		ath9k_setpower(sc, ATH9K_PM_AWAKE);
+
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+	if ((sc->btcoex.no_stomp_timer) &&
+	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
+}
+
+void ath_descdma_cleanup(struct ath_softc *sc,
+			 struct ath_descdma *dd,
+			 struct list_head *head)
+{
+	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
+			  dd->dd_desc_paddr);
+
+	INIT_LIST_HEAD(head);
+	kfree(dd->dd_bufptr);
+	memset(dd, 0, sizeof(*dd));
+}
+
+void ath_detach(struct ath_softc *sc)
+{
+	ath_clean_core(sc);
+	ath9k_uninit_hw(sc);
+}
+
+void ath_cleanup(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_clean_core(sc);
+	free_irq(sc->irq, sc);
+	ath_bus_cleanup(common);
+	kfree(sc->sec_wiphy);
+	ieee80211_free_hw(sc->hw);
+
+	ath9k_uninit_hw(sc);
+}
+
+/************************/
+/*     Module Hooks     */
+/************************/
+
+static int __init ath9k_init(void)
+{
+	int error;
+
+	/* Register rate control algorithm */
+	error = ath_rate_control_register();
+	if (error != 0) {
+		printk(KERN_ERR
+			"ath9k: Unable to register rate control "
+			"algorithm: %d\n",
+			error);
+		goto err_out;
+	}
+
+	error = ath9k_debug_create_root();
+	if (error) {
+		printk(KERN_ERR
+			"ath9k: Unable to create debugfs root: %d\n",
+			error);
+		goto err_rate_unregister;
+	}
+
+	error = ath_pci_init();
+	if (error < 0) {
+		printk(KERN_ERR
+			"ath9k: No PCI devices found, driver not installed.\n");
+		error = -ENODEV;
+		goto err_remove_root;
+	}
+
+	error = ath_ahb_init();
+	if (error < 0) {
+		error = -ENODEV;
+		goto err_pci_exit;
+	}
+
+	return 0;
+
+ err_pci_exit:
+	ath_pci_exit();
+
+ err_remove_root:
+	ath9k_debug_remove_root();
+ err_rate_unregister:
+	ath_rate_control_unregister();
+ err_out:
+	return error;
+}
+module_init(ath9k_init);
+
+static void __exit ath9k_exit(void)
+{
+	ath_ahb_exit();
+	ath_pci_exit();
+	ath9k_debug_remove_root();
+	ath_rate_control_unregister();
+	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
+}
+module_exit(ath9k_exit);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 31a33cf762da..48bd5d50f4d6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -18,118 +18,6 @@
 #include "ath9k.h"
 #include "btcoex.h"
 
-static char *dev_info = "ath9k";
-
-MODULE_AUTHOR("Atheros Communications");
-MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
-MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
-MODULE_LICENSE("Dual BSD/GPL");
-
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
-
-static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
-module_param_named(debug, ath9k_debug, uint, 0);
-MODULE_PARM_DESC(debug, "Debugging mask");
-
-/* We use the hw_value as an index into our private channel structure */
-
-#define CHAN2G(_freq, _idx)  { \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-#define CHAN5G(_freq, _idx) { \
-	.band = IEEE80211_BAND_5GHZ, \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-/* Some 2 GHz radios are actually tunable on 2312-2732
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static struct ieee80211_channel ath9k_2ghz_chantable[] = {
-	CHAN2G(2412, 0), /* Channel 1 */
-	CHAN2G(2417, 1), /* Channel 2 */
-	CHAN2G(2422, 2), /* Channel 3 */
-	CHAN2G(2427, 3), /* Channel 4 */
-	CHAN2G(2432, 4), /* Channel 5 */
-	CHAN2G(2437, 5), /* Channel 6 */
-	CHAN2G(2442, 6), /* Channel 7 */
-	CHAN2G(2447, 7), /* Channel 8 */
-	CHAN2G(2452, 8), /* Channel 9 */
-	CHAN2G(2457, 9), /* Channel 10 */
-	CHAN2G(2462, 10), /* Channel 11 */
-	CHAN2G(2467, 11), /* Channel 12 */
-	CHAN2G(2472, 12), /* Channel 13 */
-	CHAN2G(2484, 13), /* Channel 14 */
-};
-
-/* Some 5 GHz radios are actually tunable on XXXX-YYYY
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static struct ieee80211_channel ath9k_5ghz_chantable[] = {
-	/* _We_ call this UNII 1 */
-	CHAN5G(5180, 14), /* Channel 36 */
-	CHAN5G(5200, 15), /* Channel 40 */
-	CHAN5G(5220, 16), /* Channel 44 */
-	CHAN5G(5240, 17), /* Channel 48 */
-	/* _We_ call this UNII 2 */
-	CHAN5G(5260, 18), /* Channel 52 */
-	CHAN5G(5280, 19), /* Channel 56 */
-	CHAN5G(5300, 20), /* Channel 60 */
-	CHAN5G(5320, 21), /* Channel 64 */
-	/* _We_ call this "Middle band" */
-	CHAN5G(5500, 22), /* Channel 100 */
-	CHAN5G(5520, 23), /* Channel 104 */
-	CHAN5G(5540, 24), /* Channel 108 */
-	CHAN5G(5560, 25), /* Channel 112 */
-	CHAN5G(5580, 26), /* Channel 116 */
-	CHAN5G(5600, 27), /* Channel 120 */
-	CHAN5G(5620, 28), /* Channel 124 */
-	CHAN5G(5640, 29), /* Channel 128 */
-	CHAN5G(5660, 30), /* Channel 132 */
-	CHAN5G(5680, 31), /* Channel 136 */
-	CHAN5G(5700, 32), /* Channel 140 */
-	/* _We_ call this UNII 3 */
-	CHAN5G(5745, 33), /* Channel 149 */
-	CHAN5G(5765, 34), /* Channel 153 */
-	CHAN5G(5785, 35), /* Channel 157 */
-	CHAN5G(5805, 36), /* Channel 161 */
-	CHAN5G(5825, 37), /* Channel 165 */
-};
-
-/* Atheros hardware rate code addition for short premble */
-#define SHPCHECK(__hw_rate, __flags) \
-	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
-
-#define RATE(_bitrate, _hw_rate, _flags) {              \
-	.bitrate        = (_bitrate),                   \
-	.flags          = (_flags),                     \
-	.hw_value       = (_hw_rate),                   \
-	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
-}
-
-static struct ieee80211_rate ath9k_legacy_rates[] = {
-	RATE(10, 0x1b, 0),
-	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(60, 0x0b, 0),
-	RATE(90, 0x0f, 0),
-	RATE(120, 0x0a, 0),
-	RATE(180, 0x0e, 0),
-	RATE(240, 0x09, 0),
-	RATE(360, 0x0d, 0),
-	RATE(480, 0x08, 0),
-	RATE(540, 0x0c, 0),
-};
-
 static void ath_cache_conf_rate(struct ath_softc *sc,
 				struct ieee80211_conf *conf)
 {
@@ -221,7 +109,7 @@ static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
 	return channel;
 }
 
-static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
+bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
 {
 	unsigned long flags;
 	bool ret;
@@ -349,7 +237,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
  *  When the task is complete, it reschedules itself depending on the
  *  appropriate interval that was calculated.
  */
-static void ath_ani_calibrate(unsigned long data)
+void ath_ani_calibrate(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
@@ -504,7 +392,7 @@ static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 		ath_tx_node_cleanup(sc, an);
 }
 
-static void ath9k_tasklet(unsigned long data)
+void ath9k_tasklet(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
@@ -924,44 +812,6 @@ static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf
 	}
 }
 
-static void setup_ht_cap(struct ath_softc *sc,
-			 struct ieee80211_sta_ht_cap *ht_info)
-{
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	u8 tx_streams, rx_streams;
-
-	ht_info->ht_supported = true;
-	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-		       IEEE80211_HT_CAP_SM_PS |
-		       IEEE80211_HT_CAP_SGI_40 |
-		       IEEE80211_HT_CAP_DSSSCCK40;
-
-	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-
-	/* set up supported mcs set */
-	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-	tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
-		     1 : 2;
-	rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
-		     1 : 2;
-
-	if (tx_streams != rx_streams) {
-		ath_print(common, ATH_DBG_CONFIG,
-			  "TX streams %d, RX streams: %d\n",
-			  tx_streams, rx_streams);
-		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
-		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
-				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-	}
-
-	ht_info->mcs.rx_mask[0] = 0xff;
-	if (rx_streams >= 2)
-		ht_info->mcs.rx_mask[1] = 0xff;
-
-	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-}
-
 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
@@ -1084,513 +934,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 }
 
-static void ath9k_uninit_hw(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	BUG_ON(!ah);
-
-	ath9k_exit_debug(ah);
-	ath9k_hw_detach(ah);
-	sc->sc_ah = NULL;
-}
-
-static void ath_clean_core(struct ath_softc *sc)
-{
-	struct ieee80211_hw *hw = sc->hw;
-	struct ath_hw *ah = sc->sc_ah;
-	int i = 0;
-
-	ath9k_ps_wakeup(sc);
-
-	dev_dbg(sc->dev, "Detach ATH hw\n");
-
-	ath_deinit_leds(sc);
-	wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
-	for (i = 0; i < sc->num_sec_wiphy; i++) {
-		struct ath_wiphy *aphy = sc->sec_wiphy[i];
-		if (aphy == NULL)
-			continue;
-		sc->sec_wiphy[i] = NULL;
-		ieee80211_unregister_hw(aphy->hw);
-		ieee80211_free_hw(aphy->hw);
-	}
-	ieee80211_unregister_hw(hw);
-	ath_rx_cleanup(sc);
-	ath_tx_cleanup(sc);
-
-	tasklet_kill(&sc->intr_tq);
-	tasklet_kill(&sc->bcon_tasklet);
-
-	if (!(sc->sc_flags & SC_OP_INVALID))
-		ath9k_setpower(sc, ATH9K_PM_AWAKE);
-
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	if ((sc->btcoex.no_stomp_timer) &&
-	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
-		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
-}
-
-void ath_detach(struct ath_softc *sc)
-{
-	ath_clean_core(sc);
-	ath9k_uninit_hw(sc);
-}
-
-void ath_cleanup(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	ath_clean_core(sc);
-	free_irq(sc->irq, sc);
-	ath_bus_cleanup(common);
-	kfree(sc->sec_wiphy);
-	ieee80211_free_hw(sc->hw);
-
-	ath9k_uninit_hw(sc);
-}
-
-static int ath9k_reg_notifier(struct wiphy *wiphy,
-			      struct regulatory_request *request)
-{
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
-
-	return ath_reg_notifier_apply(wiphy, request, reg);
-}
-
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
-{
-	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&sc->sc_serial_rw, flags);
-		iowrite32(val, sc->mem + reg_offset);
-		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
-	} else
-		iowrite32(val, sc->mem + reg_offset);
-}
-
-static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
-{
-	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-	u32 val;
-
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&sc->sc_serial_rw, flags);
-		val = ioread32(sc->mem + reg_offset);
-		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
-	} else
-		val = ioread32(sc->mem + reg_offset);
-	return val;
-}
-
-static const struct ath_ops ath9k_common_ops = {
-	.read = ath9k_ioread32,
-	.write = ath9k_iowrite32,
-};
-
-/*
- * Initialize and fill ath_softc, ath_sofct is the
- * "Software Carrier" struct. Historically it has existed
- * to allow the separation between hardware specific
- * variables (now in ath_hw) and driver specific variables.
- */
-static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
-			  const struct ath_bus_ops *bus_ops)
-{
-	struct ath_hw *ah = NULL;
-	struct ath_common *common;
-	int r = 0, i;
-	int csz = 0;
-	int qnum;
-
-	/* XXX: hardware will not be ready until ath_open() being called */
-	sc->sc_flags |= SC_OP_INVALID;
-
-	spin_lock_init(&sc->wiphy_lock);
-	spin_lock_init(&sc->sc_resetlock);
-	spin_lock_init(&sc->sc_serial_rw);
-	spin_lock_init(&sc->sc_pm_lock);
-	mutex_init(&sc->mutex);
-	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
-	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
-		     (unsigned long)sc);
-
-	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
-	if (!ah)
-		return -ENOMEM;
-
-	ah->hw_version.devid = devid;
-	ah->hw_version.subsysid = subsysid;
-	sc->sc_ah = ah;
-
-	common = ath9k_hw_common(ah);
-	common->ops = &ath9k_common_ops;
-	common->bus_ops = bus_ops;
-	common->ah = ah;
-	common->hw = sc->hw;
-	common->priv = sc;
-	common->debug_mask = ath9k_debug;
-
-	/*
-	 * Cache line size is used to size and align various
-	 * structures used to communicate with the hardware.
-	 */
-	ath_read_cachesize(common, &csz);
-	/* XXX assert csz is non-zero */
-	common->cachelsz = csz << 2;	/* convert to bytes */
-
-	r = ath9k_hw_init(ah);
-	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to initialize hardware; "
-			  "initialization status: %d\n", r);
-		goto bad_free_hw;
-	}
-
-	if (ath9k_init_debug(ah) < 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to create debugfs files\n");
-		goto bad_free_hw;
-	}
-
-	/* Get the hardware key cache size. */
-	common->keymax = ah->caps.keycache_size;
-	if (common->keymax > ATH_KEYMAX) {
-		ath_print(common, ATH_DBG_ANY,
-			  "Warning, using only %u entries in %u key cache\n",
-			  ATH_KEYMAX, common->keymax);
-		common->keymax = ATH_KEYMAX;
-	}
-
-	/*
-	 * Reset the key cache since some parts do not
-	 * reset the contents on initial power up.
-	 */
-	for (i = 0; i < common->keymax; i++)
-		ath9k_hw_keyreset(ah, (u16) i);
-
-	/* default to MONITOR mode */
-	sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
-
-	/*
-	 * Allocate hardware transmit queues: one queue for
-	 * beacon frames and one data queue for each QoS
-	 * priority.  Note that the hal handles reseting
-	 * these queues at the needed time.
-	 */
-	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
-	if (sc->beacon.beaconq == -1) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup a beacon xmit queue\n");
-		r = -EIO;
-		goto bad2;
-	}
-	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
-	if (sc->beacon.cabq == NULL) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup CAB xmit queue\n");
-		r = -EIO;
-		goto bad2;
-	}
-
-	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
-	ath_cabq_update(sc);
-
-	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
-		sc->tx.hwq_map[i] = -1;
-
-	/* Setup data queues */
-	/* NB: ensure BK queue is the lowest priority h/w queue */
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BK traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BE traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VI traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VO traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-
-	/* Initializes the noise floor to a reasonable default value.
-	 * Later on this will be updated during ANI processing. */
-
-	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
-	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
-
-	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				   ATH9K_CIPHER_TKIP, NULL)) {
-		/*
-		 * Whether we should enable h/w TKIP MIC.
-		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
-		 * report WMM capable, so it's always safe to turn on
-		 * TKIP MIC in this case.
-		 */
-		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
-				       0, 1, NULL);
-	}
-
-	/*
-	 * Check whether the separate key cache entries
-	 * are required to handle both tx+rx MIC keys.
-	 * With split mic keys the number of stations is limited
-	 * to 27 otherwise 59.
-	 */
-	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				   ATH9K_CIPHER_TKIP, NULL)
-	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				      ATH9K_CIPHER_MIC, NULL)
-	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
-				      0, NULL))
-		common->splitmic = 1;
-
-	/* turn on mcast key search if possible */
-	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
-		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
-					     1, NULL);
-
-	sc->config.txpowlimit = ATH_TXPOWER_MAX;
-
-	/* 11n Capabilities */
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		sc->sc_flags |= SC_OP_TXAGGR;
-		sc->sc_flags |= SC_OP_RXAGGR;
-	}
-
-	common->tx_chainmask = ah->caps.tx_chainmask;
-	common->rx_chainmask = ah->caps.rx_chainmask;
-
-	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
-	sc->rx.defant = ath9k_hw_getdefantenna(ah);
-
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
-		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
-
-	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
-
-	/* initialize beacon slots */
-	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
-		sc->beacon.bslot[i] = NULL;
-		sc->beacon.bslot_aphy[i] = NULL;
-	}
-
-	/* setup channels and rates */
-
-	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
-		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
-			ARRAY_SIZE(ath9k_2ghz_chantable);
-		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates);
-	}
-
-	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
-		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
-			ARRAY_SIZE(ath9k_5ghz_chantable);
-		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			ath9k_legacy_rates + 4;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates) - 4;
-	}
-
-	switch (ah->btcoex_hw.scheme) {
-	case ATH_BTCOEX_CFG_NONE:
-		break;
-	case ATH_BTCOEX_CFG_2WIRE:
-		ath9k_hw_btcoex_init_2wire(ah);
-		break;
-	case ATH_BTCOEX_CFG_3WIRE:
-		ath9k_hw_btcoex_init_3wire(ah);
-		r = ath_init_btcoex_timer(sc);
-		if (r)
-			goto bad2;
-		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
-		ath9k_hw_init_btcoex_hw(ah, qnum);
-		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
-		break;
-	default:
-		WARN_ON(1);
-		break;
-	}
-
-	return 0;
-bad2:
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-bad_free_hw:
-	ath9k_uninit_hw(sc);
-	return r;
-}
-
-void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_AMPDU_AGGREGATION |
-		IEEE80211_HW_SUPPORTS_PS |
-		IEEE80211_HW_PS_NULLFUNC_STACK |
-		IEEE80211_HW_SPECTRUM_MGMT;
-
-	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
-		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
-
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_AP) |
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC) |
-		BIT(NL80211_IFTYPE_MESH_POINT);
-
-	if (AR_SREV_5416(ah))
-		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
-
-	hw->queues = 4;
-	hw->max_rates = 4;
-	hw->channel_change_time = 5000;
-	hw->max_listen_interval = 10;
-	/* Hardware supports 10 but we use 4 */
-	hw->max_rate_tries = 4;
-	hw->sta_data_size = sizeof(struct ath_node);
-	hw->vif_data_size = sizeof(struct ath_vif);
-
-	hw->rate_control_algorithm = "ath9k_rate_control";
-
-	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
-		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&sc->sbands[IEEE80211_BAND_2GHZ];
-	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
-		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&sc->sbands[IEEE80211_BAND_5GHZ];
-}
-
-/* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
-		    const struct ath_bus_ops *bus_ops)
-{
-	struct ieee80211_hw *hw = sc->hw;
-	struct ath_common *common;
-	struct ath_hw *ah;
-	int error = 0, i;
-	struct ath_regulatory *reg;
-
-	dev_dbg(sc->dev, "Attach ATH hw\n");
-
-	error = ath_init_softc(devid, sc, subsysid, bus_ops);
-	if (error != 0)
-		return error;
-
-	ah = sc->sc_ah;
-	common = ath9k_hw_common(ah);
-
-	/* get mac address from hardware and set in mac80211 */
-
-	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
-
-	ath_set_hw_capab(sc, hw);
-
-	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
-			      ath9k_reg_notifier);
-	if (error)
-		return error;
-
-	reg = &common->regulatory;
-
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
-			setup_ht_cap(sc,
-				     &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
-			setup_ht_cap(sc,
-				     &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
-	}
-
-	/* initialize tx/rx engine */
-	error = ath_tx_init(sc, ATH_TXBUF);
-	if (error != 0)
-		goto error_attach;
-
-	error = ath_rx_init(sc, ATH_RXBUF);
-	if (error != 0)
-		goto error_attach;
-
-	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
-	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
-	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
-
-	error = ieee80211_register_hw(hw);
-
-	if (!ath_is_world_regd(reg)) {
-		error = regulatory_hint(hw->wiphy, reg->alpha2);
-		if (error)
-			goto error_attach;
-	}
-
-	/* Initialize LED control */
-	ath_init_leds(sc);
-
-	ath_start_rfkill_poll(sc);
-
-	return 0;
-
-error_attach:
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	ath9k_uninit_hw(sc);
-
-	return error;
-}
-
 int ath_reset(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
@@ -1648,125 +991,6 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	return r;
 }
 
-/*
- *  This function will allocate both the DMA descriptor structure, and the
- *  buffers it contains.  These are used to contain the descriptors used
- *  by the system.
-*/
-int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
-		      struct list_head *head, const char *name,
-		      int nbuf, int ndesc)
-{
-#define	DS2PHYS(_dd, _ds)						\
-	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
-#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
-#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_desc *ds;
-	struct ath_buf *bf;
-	int i, bsize, error;
-
-	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
-		  name, nbuf, ndesc);
-
-	INIT_LIST_HEAD(head);
-	/* ath_desc must be a multiple of DWORDs */
-	if ((sizeof(struct ath_desc) % 4) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "ath_desc not DWORD aligned\n");
-		BUG_ON((sizeof(struct ath_desc) % 4) != 0);
-		error = -ENOMEM;
-		goto fail;
-	}
-
-	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
-
-	/*
-	 * Need additional DMA memory because we can't use
-	 * descriptors that cross the 4K page boundary. Assume
-	 * one skipped descriptor per 4K page.
-	 */
-	if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
-		u32 ndesc_skipped =
-			ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
-		u32 dma_len;
-
-		while (ndesc_skipped) {
-			dma_len = ndesc_skipped * sizeof(struct ath_desc);
-			dd->dd_desc_len += dma_len;
-
-			ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
-		};
-	}
-
-	/* allocate descriptors */
-	dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
-					 &dd->dd_desc_paddr, GFP_KERNEL);
-	if (dd->dd_desc == NULL) {
-		error = -ENOMEM;
-		goto fail;
-	}
-	ds = dd->dd_desc;
-	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		  name, ds, (u32) dd->dd_desc_len,
-		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
-
-	/* allocate buffers */
-	bsize = sizeof(struct ath_buf) * nbuf;
-	bf = kzalloc(bsize, GFP_KERNEL);
-	if (bf == NULL) {
-		error = -ENOMEM;
-		goto fail2;
-	}
-	dd->dd_bufptr = bf;
-
-	for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
-		bf->bf_desc = ds;
-		bf->bf_daddr = DS2PHYS(dd, ds);
-
-		if (!(sc->sc_ah->caps.hw_caps &
-		      ATH9K_HW_CAP_4KB_SPLITTRANS)) {
-			/*
-			 * Skip descriptor addresses which can cause 4KB
-			 * boundary crossing (addr + length) with a 32 dword
-			 * descriptor fetch.
-			 */
-			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
-				BUG_ON((caddr_t) bf->bf_desc >=
-				       ((caddr_t) dd->dd_desc +
-					dd->dd_desc_len));
-
-				ds += ndesc;
-				bf->bf_desc = ds;
-				bf->bf_daddr = DS2PHYS(dd, ds);
-			}
-		}
-		list_add_tail(&bf->list, head);
-	}
-	return 0;
-fail2:
-	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
-			  dd->dd_desc_paddr);
-fail:
-	memset(dd, 0, sizeof(*dd));
-	return error;
-#undef ATH_DESC_4KB_BOUND_CHECK
-#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
-#undef DS2PHYS
-}
-
-void ath_descdma_cleanup(struct ath_softc *sc,
-			 struct ath_descdma *dd,
-			 struct list_head *head)
-{
-	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
-			  dd->dd_desc_paddr);
-
-	INIT_LIST_HEAD(head);
-	kfree(dd->dd_bufptr);
-	memset(dd, 0, sizeof(*dd));
-}
-
 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
 {
 	int qnum;
@@ -2778,63 +2002,3 @@ struct ieee80211_ops ath9k_ops = {
 	.sw_scan_complete   = ath9k_sw_scan_complete,
 	.rfkill_poll        = ath9k_rfkill_poll_state,
 };
-
-static int __init ath9k_init(void)
-{
-	int error;
-
-	/* Register rate control algorithm */
-	error = ath_rate_control_register();
-	if (error != 0) {
-		printk(KERN_ERR
-			"ath9k: Unable to register rate control "
-			"algorithm: %d\n",
-			error);
-		goto err_out;
-	}
-
-	error = ath9k_debug_create_root();
-	if (error) {
-		printk(KERN_ERR
-			"ath9k: Unable to create debugfs root: %d\n",
-			error);
-		goto err_rate_unregister;
-	}
-
-	error = ath_pci_init();
-	if (error < 0) {
-		printk(KERN_ERR
-			"ath9k: No PCI devices found, driver not installed.\n");
-		error = -ENODEV;
-		goto err_remove_root;
-	}
-
-	error = ath_ahb_init();
-	if (error < 0) {
-		error = -ENODEV;
-		goto err_pci_exit;
-	}
-
-	return 0;
-
- err_pci_exit:
-	ath_pci_exit();
-
- err_remove_root:
-	ath9k_debug_remove_root();
- err_rate_unregister:
-	ath_rate_control_unregister();
- err_out:
-	return error;
-}
-module_init(ath9k_init);
-
-static void __exit ath9k_exit(void)
-{
-	ath_ahb_exit();
-	ath_pci_exit();
-	ath9k_debug_remove_root();
-	ath_rate_control_unregister();
-	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
-}
-module_exit(ath9k_exit);
-- 
cgit v1.2.3


From 1b04b9308ebc7f6accb319cf51c9b8ec29f79707 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:05 +0530
Subject: ath9k: Cleanup Powersave flags

sc_flags has slowly become a kitchen sink over time.
Move powersave related flags to a separate variable.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 43 ++++++++++++++++++----------------
 drivers/net/wireless/ath/ath9k/main.c  | 36 ++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/recv.c  | 36 ++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/xmit.c  | 18 +++++++-------
 4 files changed, 68 insertions(+), 65 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 68a423054e6c..f4645a45ef3c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -416,26 +416,28 @@ void ath_deinit_leds(struct ath_softc *sc);
 #define ATH_TXPOWER_MAX         100     /* .5 dBm units */
 #define ATH_RATE_DUMMY_MARKER   0
 
-#define SC_OP_INVALID           BIT(0)
-#define SC_OP_BEACONS           BIT(1)
-#define SC_OP_RXAGGR            BIT(2)
-#define SC_OP_TXAGGR            BIT(3)
-#define SC_OP_FULL_RESET        BIT(4)
-#define SC_OP_PREAMBLE_SHORT    BIT(5)
-#define SC_OP_PROTECT_ENABLE    BIT(6)
-#define SC_OP_RXFLUSH           BIT(7)
-#define SC_OP_LED_ASSOCIATED    BIT(8)
-#define SC_OP_WAIT_FOR_BEACON   BIT(12)
-#define SC_OP_LED_ON            BIT(13)
-#define SC_OP_SCANNING          BIT(14)
-#define SC_OP_TSF_RESET         BIT(15)
-#define SC_OP_WAIT_FOR_CAB      BIT(16)
-#define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
-#define SC_OP_WAIT_FOR_TX_ACK   BIT(18)
-#define SC_OP_BEACON_SYNC       BIT(19)
-#define SC_OP_BT_PRIORITY_DETECTED BIT(21)
-#define SC_OP_NULLFUNC_COMPLETED BIT(22)
-#define SC_OP_PS_ENABLED	BIT(23)
+#define SC_OP_INVALID                BIT(0)
+#define SC_OP_BEACONS                BIT(1)
+#define SC_OP_RXAGGR                 BIT(2)
+#define SC_OP_TXAGGR                 BIT(3)
+#define SC_OP_FULL_RESET             BIT(4)
+#define SC_OP_PREAMBLE_SHORT         BIT(5)
+#define SC_OP_PROTECT_ENABLE         BIT(6)
+#define SC_OP_RXFLUSH                BIT(7)
+#define SC_OP_LED_ASSOCIATED         BIT(8)
+#define SC_OP_LED_ON                 BIT(9)
+#define SC_OP_SCANNING               BIT(10)
+#define SC_OP_TSF_RESET              BIT(11)
+#define SC_OP_BT_PRIORITY_DETECTED   BIT(12)
+
+/* Powersave flags */
+#define PS_WAIT_FOR_BEACON        BIT(0)
+#define PS_WAIT_FOR_CAB           BIT(1)
+#define PS_WAIT_FOR_PSPOLL_DATA   BIT(2)
+#define PS_WAIT_FOR_TX_ACK        BIT(3)
+#define PS_BEACON_SYNC            BIT(4)
+#define PS_NULLFUNC_COMPLETED     BIT(5)
+#define PS_ENABLED                BIT(6)
 
 struct ath_wiphy;
 struct ath_rate_table;
@@ -471,6 +473,7 @@ struct ath_softc {
 
 	u32 intrstatus;
 	u32 sc_flags; /* SC_OP_* */
+	u16 ps_flags; /* PS_* */
 	u16 curtxpow;
 	u8 nbcnvifs;
 	u16 nvifs;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 48bd5d50f4d6..974de2056b4a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -144,10 +144,10 @@ void ath9k_ps_restore(struct ath_softc *sc)
 		goto unlock;
 
 	if (sc->ps_enabled &&
-	    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
-			      SC_OP_WAIT_FOR_CAB |
-			      SC_OP_WAIT_FOR_PSPOLL_DATA |
-			      SC_OP_WAIT_FOR_TX_ACK)))
+	    !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
+			      PS_WAIT_FOR_CAB |
+			      PS_WAIT_FOR_PSPOLL_DATA |
+			      PS_WAIT_FOR_TX_ACK)))
 		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 
  unlock:
@@ -424,7 +424,7 @@ void ath9k_tasklet(unsigned long data)
 		 */
 		ath_print(common, ATH_DBG_PS,
 			  "TSFOOR - Sync with next Beacon\n");
-		sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
+		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
 	}
 
 	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
@@ -525,7 +525,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 			 * receive frames */
 			ath9k_setpower(sc, ATH9K_PM_AWAKE);
 			ath9k_hw_setrxabort(sc->sc_ah, 0);
-			sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
+			sc->ps_flags |= PS_WAIT_FOR_BEACON;
 		}
 
 chip_reset:
@@ -833,7 +833,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		 * on the receipt of the first Beacon frame (i.e.,
 		 * after time sync with the AP).
 		 */
-		sc->sc_flags |= SC_OP_BEACON_SYNC;
+		sc->ps_flags |= PS_BEACON_SYNC;
 
 		/* Configure the beacon */
 		ath_beacon_config(sc, vif);
@@ -1238,11 +1238,11 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 		if (ieee80211_is_pspoll(hdr->frame_control)) {
 			ath_print(common, ATH_DBG_PS,
 				  "Sending PS-Poll to pick a buffered frame\n");
-			sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
+			sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
 		} else {
 			ath_print(common, ATH_DBG_PS,
 				  "Wake up to complete TX\n");
-			sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
+			sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
 		}
 		/*
 		 * The actual restore operation will happen only after
@@ -1538,7 +1538,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	 */
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
-			sc->sc_flags |= SC_OP_PS_ENABLED;
+			sc->ps_flags |= PS_ENABLED;
 			if (!(ah->caps.hw_caps &
 			      ATH9K_HW_CAP_AUTOSLEEP)) {
 				if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
@@ -1551,23 +1551,23 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 			 * At this point we know hardware has received an ACK
 			 * of a previously sent null data frame.
 			 */
-			if ((sc->sc_flags & SC_OP_NULLFUNC_COMPLETED)) {
-				sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
+			if ((sc->ps_flags & PS_NULLFUNC_COMPLETED)) {
+				sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
 				sc->ps_enabled = true;
 				ath9k_hw_setrxabort(sc->sc_ah, 1);
                         }
 		} else {
 			sc->ps_enabled = false;
-			sc->sc_flags &= ~(SC_OP_PS_ENABLED |
-					  SC_OP_NULLFUNC_COMPLETED);
+			sc->ps_flags &= ~(PS_ENABLED |
+					  PS_NULLFUNC_COMPLETED);
 			ath9k_setpower(sc, ATH9K_PM_AWAKE);
 			if (!(ah->caps.hw_caps &
 			      ATH9K_HW_CAP_AUTOSLEEP)) {
 				ath9k_hw_setrxabort(sc->sc_ah, 0);
-				sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
-						  SC_OP_WAIT_FOR_CAB |
-						  SC_OP_WAIT_FOR_PSPOLL_DATA |
-						  SC_OP_WAIT_FOR_TX_ACK);
+				sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
+						  PS_WAIT_FOR_CAB |
+						  PS_WAIT_FOR_PSPOLL_DATA |
+						  PS_WAIT_FOR_TX_ACK);
 				if (sc->imask & ATH9K_INT_TIM_TIMER) {
 					sc->imask &= ~ATH9K_INT_TIM_TIMER;
 					ath9k_hw_set_interrupts(sc->sc_ah,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 477365e5ae69..17b0a6dd8caf 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -364,10 +364,10 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 	if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0)
 		return; /* not from our current AP */
 
-	sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
+	sc->ps_flags &= ~PS_WAIT_FOR_BEACON;
 
-	if (sc->sc_flags & SC_OP_BEACON_SYNC) {
-		sc->sc_flags &= ~SC_OP_BEACON_SYNC;
+	if (sc->ps_flags & PS_BEACON_SYNC) {
+		sc->ps_flags &= ~PS_BEACON_SYNC;
 		ath_print(common, ATH_DBG_PS,
 			  "Reconfigure Beacon timers based on "
 			  "timestamp from the AP\n");
@@ -384,17 +384,17 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		 */
 		ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
 			  "buffered broadcast/multicast frame(s)\n");
-		sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
+		sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
 		return;
 	}
 
-	if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) {
+	if (sc->ps_flags & PS_WAIT_FOR_CAB) {
 		/*
 		 * This can happen if a broadcast frame is dropped or the AP
 		 * fails to send a frame indicating that all CAB frames have
 		 * been delivered.
 		 */
-		sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
+		sc->ps_flags &= ~PS_WAIT_FOR_CAB;
 		ath_print(common, ATH_DBG_PS,
 			  "PS wait for CAB frames timed out\n");
 	}
@@ -408,10 +408,10 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 	hdr = (struct ieee80211_hdr *)skb->data;
 
 	/* Process Beacon and CAB receive in PS state */
-	if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) &&
+	if ((sc->ps_flags & PS_WAIT_FOR_BEACON) &&
 	    ieee80211_is_beacon(hdr->frame_control))
 		ath_rx_ps_beacon(sc, skb);
-	else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) &&
+	else if ((sc->ps_flags & PS_WAIT_FOR_CAB) &&
 		 (ieee80211_is_data(hdr->frame_control) ||
 		  ieee80211_is_action(hdr->frame_control)) &&
 		 is_multicast_ether_addr(hdr->addr1) &&
@@ -420,20 +420,20 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 		 * No more broadcast/multicast frames to be received at this
 		 * point.
 		 */
-		sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
+		sc->ps_flags &= ~PS_WAIT_FOR_CAB;
 		ath_print(common, ATH_DBG_PS,
 			  "All PS CAB frames received, back to sleep\n");
-	} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
+	} else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
 		   !is_multicast_ether_addr(hdr->addr1) &&
 		   !ieee80211_has_morefrags(hdr->frame_control)) {
-		sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
+		sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
 		ath_print(common, ATH_DBG_PS,
 			  "Going back to sleep after having received "
 			  "PS-Poll data (0x%x)\n",
-			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
-					SC_OP_WAIT_FOR_CAB |
-					SC_OP_WAIT_FOR_PSPOLL_DATA |
-					SC_OP_WAIT_FOR_TX_ACK));
+			sc->ps_flags & (PS_WAIT_FOR_BEACON |
+					PS_WAIT_FOR_CAB |
+					PS_WAIT_FOR_PSPOLL_DATA |
+					PS_WAIT_FOR_TX_ACK));
 	}
 }
 
@@ -631,9 +631,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 			sc->rx.rxotherant = 0;
 		}
 
-		if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
-					     SC_OP_WAIT_FOR_CAB |
-					     SC_OP_WAIT_FOR_PSPOLL_DATA)))
+		if (unlikely(sc->ps_flags & (PS_WAIT_FOR_BEACON |
+					     PS_WAIT_FOR_CAB |
+					     PS_WAIT_FOR_PSPOLL_DATA)))
 			ath_rx_ps(sc, skb);
 
 		ath_rx_send_to_mac80211(hw, sc, skb, rxs);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fa12b9060b0b..a821bb687b3b 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1648,7 +1648,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 	/* tag if this is a nullfunc frame to enable PS when AP acks it */
 	if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc)) {
 		bf->bf_isnullfunc = true;
-		sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
+		sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
 	} else
 		bf->bf_isnullfunc = false;
 
@@ -1858,15 +1858,15 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		skb_pull(skb, padsize);
 	}
 
-	if (sc->sc_flags & SC_OP_WAIT_FOR_TX_ACK) {
-		sc->sc_flags &= ~SC_OP_WAIT_FOR_TX_ACK;
+	if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
+		sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
 		ath_print(common, ATH_DBG_PS,
 			  "Going back to sleep after having "
 			  "received TX status (0x%x)\n",
-			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
-					SC_OP_WAIT_FOR_CAB |
-					SC_OP_WAIT_FOR_PSPOLL_DATA |
-					SC_OP_WAIT_FOR_TX_ACK));
+			sc->ps_flags & (PS_WAIT_FOR_BEACON |
+					PS_WAIT_FOR_CAB |
+					PS_WAIT_FOR_PSPOLL_DATA |
+					PS_WAIT_FOR_TX_ACK));
 	}
 
 	if (unlikely(tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_INTERNAL))
@@ -2053,11 +2053,11 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		 */
 		if (bf->bf_isnullfunc &&
 		    (ds->ds_txstat.ts_status & ATH9K_TX_ACKED)) {
-			if ((sc->sc_flags & SC_OP_PS_ENABLED)) {
+			if ((sc->ps_flags & PS_ENABLED)) {
 				sc->ps_enabled = true;
 				ath9k_hw_setrxabort(sc->sc_ah, 1);
 			} else
-				sc->sc_flags |= SC_OP_NULLFUNC_COMPLETED;
+				sc->ps_flags |= PS_NULLFUNC_COMPLETED;
 		}
 
 		/*
-- 
cgit v1.2.3


From 285f2ddae03ca207877262f5a9dbd9cddd8b3913 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:07 +0530
Subject: ath9k: Cleanup init/deinit routines

The device initialization and termination functions
were messy and convoluted. Introduce helper functions
to clarify init_softc() and simplify things in general.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ahb.c     |  20 +-
 drivers/net/wireless/ath/ath9k/ath9k.h   |   7 +-
 drivers/net/wireless/ath/ath9k/hw.c      |   4 +-
 drivers/net/wireless/ath/ath9k/hw.h      |   2 +-
 drivers/net/wireless/ath/ath9k/init.c    | 515 ++++++++++++++++---------------
 drivers/net/wireless/ath/ath9k/pci.c     |  57 ++--
 drivers/net/wireless/ath/ath9k/virtual.c |   2 +-
 7 files changed, 309 insertions(+), 298 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 329e6bc137ab..f24b1f4c3e29 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -121,16 +121,16 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	sc->mem = mem;
 	sc->irq = irq;
 
-	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0, &ath_ahb_bus_ops);
+	ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize device\n");
+		dev_err(&pdev->dev, "request_irq failed\n");
 		goto err_free_hw;
 	}
 
-	ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
+	ret = ath9k_init_device(AR5416_AR9100_DEVID, sc, 0x0, &ath_ahb_bus_ops);
 	if (ret) {
-		dev_err(&pdev->dev, "request_irq failed\n");
-		goto err_detach;
+		dev_err(&pdev->dev, "failed to initialize device\n");
+		goto err_irq;
 	}
 
 	ah = sc->sc_ah;
@@ -143,8 +143,8 @@ static int ath_ahb_probe(struct platform_device *pdev)
 
 	return 0;
 
- err_detach:
-	ath_detach(sc);
+ err_irq:
+	free_irq(irq, sc);
  err_free_hw:
 	ieee80211_free_hw(hw);
 	platform_set_drvdata(pdev, NULL);
@@ -161,8 +161,12 @@ static int ath_ahb_remove(struct platform_device *pdev)
 	if (hw) {
 		struct ath_wiphy *aphy = hw->priv;
 		struct ath_softc *sc = aphy->sc;
+		struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
-		ath_cleanup(sc);
+		ath9k_deinit_device(sc);
+		free_irq(sc->irq, sc);
+		ieee80211_free_hw(sc->hw);
+		ath_bus_cleanup(common);
 		platform_set_drvdata(pdev, NULL);
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index f4645a45ef3c..bf3d4c4bfa52 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -544,13 +544,12 @@ extern struct ieee80211_ops ath9k_ops;
 extern int modparam_nohwcrypt;
 
 irqreturn_t ath_isr(int irq, void *dev);
-void ath_cleanup(struct ath_softc *sc);
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 		    const struct ath_bus_ops *bus_ops);
-void ath_detach(struct ath_softc *sc);
+void ath9k_deinit_device(struct ath_softc *sc);
 const char *ath_mac_bb_name(u32 mac_bb_version);
 const char *ath_rf_name(u16 rf_version);
-void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
+void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
 			   struct ath9k_channel *ichan);
 void ath_update_chainmask(struct ath_softc *sc, int is_ht);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 9474f9f6d400..2311fe7a0bf2 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1242,7 +1242,7 @@ static void ath9k_hw_init_user_settings(struct ath_hw *ah)
 		ath9k_hw_set_global_txtimeout(ah, ah->globaltxtimeout);
 }
 
-void ath9k_hw_detach(struct ath_hw *ah)
+void ath9k_hw_deinit(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 
@@ -1260,7 +1260,7 @@ free_hw:
 	kfree(ah);
 	ah = NULL;
 }
-EXPORT_SYMBOL(ath9k_hw_detach);
+EXPORT_SYMBOL(ath9k_hw_deinit);
 
 /*******/
 /* INI */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 8849450dc591..3f0f055ea39b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -616,7 +616,7 @@ static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
 
 /* Initialization, Detach, Reset */
 const char *ath9k_hw_probe(u16 vendorid, u16 devid);
-void ath9k_hw_detach(struct ath_hw *ah);
+void ath9k_hw_deinit(struct ath_hw *ah);
 int ath9k_hw_init(struct ath_hw *ah);
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   bool bChannelChange);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 2bea0892918e..16d1efb4b8b2 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -128,7 +128,7 @@ static struct ieee80211_rate ath9k_legacy_rates[] = {
 	RATE(540, 0x0c, 0),
 };
 
-static void ath9k_uninit_hw(struct ath_softc *sc);
+static void ath9k_deinit_softc(struct ath_softc *sc);
 
 /*
  * Read and write, they both share the same lock. We do this to serialize
@@ -333,67 +333,13 @@ fail:
 #undef DS2PHYS
 }
 
-static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
-			  const struct ath_bus_ops *bus_ops)
+static void ath9k_init_crypto(struct ath_softc *sc)
 {
-	struct ath_hw *ah = NULL;
-	struct ath_common *common;
-	int r = 0, i;
-	int csz = 0;
-	int qnum;
-
-	/* XXX: hardware will not be ready until ath_open() being called */
-	sc->sc_flags |= SC_OP_INVALID;
-
-	spin_lock_init(&sc->wiphy_lock);
-	spin_lock_init(&sc->sc_resetlock);
-	spin_lock_init(&sc->sc_serial_rw);
-	spin_lock_init(&sc->sc_pm_lock);
-	mutex_init(&sc->mutex);
-	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
-	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
-		     (unsigned long)sc);
-
-	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
-	if (!ah)
-		return -ENOMEM;
-
-	ah->hw_version.devid = devid;
-	ah->hw_version.subsysid = subsysid;
-	sc->sc_ah = ah;
-
-	common = ath9k_hw_common(ah);
-	common->ops = &ath9k_common_ops;
-	common->bus_ops = bus_ops;
-	common->ah = ah;
-	common->hw = sc->hw;
-	common->priv = sc;
-	common->debug_mask = ath9k_debug;
-
-	/*
-	 * Cache line size is used to size and align various
-	 * structures used to communicate with the hardware.
-	 */
-	ath_read_cachesize(common, &csz);
-	/* XXX assert csz is non-zero */
-	common->cachelsz = csz << 2;	/* convert to bytes */
-
-	r = ath9k_hw_init(ah);
-	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to initialize hardware; "
-			  "initialization status: %d\n", r);
-		goto bad_free_hw;
-	}
-
-	if (ath9k_init_debug(ah) < 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to create debugfs files\n");
-		goto bad_free_hw;
-	}
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	int i = 0;
 
 	/* Get the hardware key cache size. */
-	common->keymax = ah->caps.keycache_size;
+	common->keymax = sc->sc_ah->caps.keycache_size;
 	if (common->keymax > ATH_KEYMAX) {
 		ath_print(common, ATH_DBG_ANY,
 			  "Warning, using only %u entries in %u key cache\n",
@@ -406,185 +352,273 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	 * reset the contents on initial power up.
 	 */
 	for (i = 0; i < common->keymax; i++)
-		ath9k_hw_keyreset(ah, (u16) i);
+		ath9k_hw_keyreset(sc->sc_ah, (u16) i);
 
-	/* default to MONITOR mode */
-	sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+	if (ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)) {
+		/*
+		 * Whether we should enable h/w TKIP MIC.
+		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
+		 * report WMM capable, so it's always safe to turn on
+		 * TKIP MIC in this case.
+		 */
+		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, 0, 1, NULL);
+	}
 
 	/*
-	 * Allocate hardware transmit queues: one queue for
-	 * beacon frames and one data queue for each QoS
-	 * priority.  Note that the hal handles reseting
-	 * these queues at the needed time.
+	 * Check whether the separate key cache entries
+	 * are required to handle both tx+rx MIC keys.
+	 * With split mic keys the number of stations is limited
+	 * to 27 otherwise 59.
 	 */
-	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
+	if (ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)
+	    && ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_CIPHER,
+				      ATH9K_CIPHER_MIC, NULL)
+	    && ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_TKIP_SPLIT,
+				      0, NULL))
+		common->splitmic = 1;
+
+	/* turn on mcast key search if possible */
+	if (!ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+		(void)ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_MCAST_KEYSRCH,
+					     1, 1, NULL);
+
+}
+
+static int ath9k_init_btcoex(struct ath_softc *sc)
+{
+	int r, qnum;
+
+	switch (sc->sc_ah->btcoex_hw.scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_init_2wire(sc->sc_ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_init_3wire(sc->sc_ah);
+		r = ath_init_btcoex_timer(sc);
+		if (r)
+			return -1;
+		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+		ath9k_hw_init_btcoex_hw(sc->sc_ah, qnum);
+		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	return 0;
+}
+
+static int ath9k_init_queues(struct ath_softc *sc)
+{
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
+		sc->tx.hwq_map[i] = -1;
+
+	sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah);
 	if (sc->beacon.beaconq == -1) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to setup a beacon xmit queue\n");
-		r = -EIO;
-		goto bad2;
+		goto err;
 	}
+
 	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
 	if (sc->beacon.cabq == NULL) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to setup CAB xmit queue\n");
-		r = -EIO;
-		goto bad2;
+		goto err;
 	}
 
 	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
 	ath_cabq_update(sc);
 
-	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
-		sc->tx.hwq_map[i] = -1;
-
-	/* Setup data queues */
-	/* NB: ensure BK queue is the lowest priority h/w queue */
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to setup xmit queue for BK traffic\n");
-		r = -EIO;
-		goto bad2;
+		goto err;
 	}
 
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to setup xmit queue for BE traffic\n");
-		r = -EIO;
-		goto bad2;
+		goto err;
 	}
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to setup xmit queue for VI traffic\n");
-		r = -EIO;
-		goto bad2;
+		goto err;
 	}
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to setup xmit queue for VO traffic\n");
-		r = -EIO;
-		goto bad2;
+		goto err;
 	}
 
-	/* Initializes the noise floor to a reasonable default value.
-	 * Later on this will be updated during ANI processing. */
+	return 0;
 
-	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
-	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
+err:
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 
-	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				   ATH9K_CIPHER_TKIP, NULL)) {
-		/*
-		 * Whether we should enable h/w TKIP MIC.
-		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
-		 * report WMM capable, so it's always safe to turn on
-		 * TKIP MIC in this case.
-		 */
-		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
-				       0, 1, NULL);
+	return -EIO;
+}
+
+static void ath9k_init_channels_rates(struct ath_softc *sc)
+{
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
+			ARRAY_SIZE(ath9k_2ghz_chantable);
+		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates);
 	}
 
-	/*
-	 * Check whether the separate key cache entries
-	 * are required to handle both tx+rx MIC keys.
-	 * With split mic keys the number of stations is limited
-	 * to 27 otherwise 59.
-	 */
-	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				   ATH9K_CIPHER_TKIP, NULL)
-	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				      ATH9K_CIPHER_MIC, NULL)
-	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
-				      0, NULL))
-		common->splitmic = 1;
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
+		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
+			ARRAY_SIZE(ath9k_5ghz_chantable);
+		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			ath9k_legacy_rates + 4;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates) - 4;
+	}
+}
 
-	/* turn on mcast key search if possible */
-	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
-		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
-					     1, NULL);
+static void ath9k_init_misc(struct ath_softc *sc)
+{
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	int i = 0;
+
+	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
+	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
 
 	sc->config.txpowlimit = ATH_TXPOWER_MAX;
 
-	/* 11n Capabilities */
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		sc->sc_flags |= SC_OP_TXAGGR;
 		sc->sc_flags |= SC_OP_RXAGGR;
 	}
 
-	common->tx_chainmask = ah->caps.tx_chainmask;
-	common->rx_chainmask = ah->caps.rx_chainmask;
+	common->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
+	common->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
 
-	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
-	sc->rx.defant = ath9k_hw_getdefantenna(ah);
+	ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+	sc->rx.defant = ath9k_hw_getdefantenna(sc->sc_ah);
 
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
 		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
 
-	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
+	sc->beacon.slottime = ATH9K_SLOT_TIME_9;
 
-	/* initialize beacon slots */
 	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
 		sc->beacon.bslot[i] = NULL;
 		sc->beacon.bslot_aphy[i] = NULL;
 	}
+}
 
-	/* setup channels and rates */
+static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
+			    const struct ath_bus_ops *bus_ops)
+{
+	struct ath_hw *ah = NULL;
+	struct ath_common *common;
+	int ret = 0, i;
+	int csz = 0;
 
-	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
-		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
-			ARRAY_SIZE(ath9k_2ghz_chantable);
-		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates);
-	}
+	sc->sc_flags |= SC_OP_INVALID;
 
-	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
-		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
-			ARRAY_SIZE(ath9k_5ghz_chantable);
-		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			ath9k_legacy_rates + 4;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates) - 4;
+	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
+	if (!ah)
+		return -ENOMEM;
+
+	ah->hw_version.devid = devid;
+	ah->hw_version.subsysid = subsysid;
+	sc->sc_ah = ah;
+
+	common = ath9k_hw_common(ah);
+	common->ops = &ath9k_common_ops;
+	common->bus_ops = bus_ops;
+	common->ah = ah;
+	common->hw = sc->hw;
+	common->priv = sc;
+	common->debug_mask = ath9k_debug;
+
+	spin_lock_init(&sc->wiphy_lock);
+	spin_lock_init(&sc->sc_resetlock);
+	spin_lock_init(&sc->sc_serial_rw);
+	spin_lock_init(&sc->sc_pm_lock);
+	mutex_init(&sc->mutex);
+	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
+		     (unsigned long)sc);
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	ath_read_cachesize(common, &csz);
+	common->cachelsz = csz << 2; /* convert to bytes */
+
+	ret = ath9k_hw_init(ah);
+	if (ret) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to initialize hardware; "
+			  "initialization status: %d\n", ret);
+		goto err_hw;
 	}
 
-	switch (ah->btcoex_hw.scheme) {
-	case ATH_BTCOEX_CFG_NONE:
-		break;
-	case ATH_BTCOEX_CFG_2WIRE:
-		ath9k_hw_btcoex_init_2wire(ah);
-		break;
-	case ATH_BTCOEX_CFG_3WIRE:
-		ath9k_hw_btcoex_init_3wire(ah);
-		r = ath_init_btcoex_timer(sc);
-		if (r)
-			goto bad2;
-		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
-		ath9k_hw_init_btcoex_hw(ah, qnum);
-		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
-		break;
-	default:
-		WARN_ON(1);
-		break;
+	ret = ath9k_init_debug(ah);
+	if (ret) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to create debugfs files\n");
+		goto err_debug;
 	}
 
+	ret = ath9k_init_queues(sc);
+	if (ret)
+		goto err_queues;
+
+	ret =  ath9k_init_btcoex(sc);
+	if (ret)
+		goto err_btcoex;
+
+	ath9k_init_crypto(sc);
+	ath9k_init_channels_rates(sc);
+	ath9k_init_misc(sc);
+
 	return 0;
-bad2:
-	/* cleanup tx queues */
+
+err_btcoex:
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+err_queues:
+	ath9k_exit_debug(ah);
+err_debug:
+	ath9k_hw_deinit(ah);
+err_hw:
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
 
-bad_free_hw:
-	ath9k_uninit_hw(sc);
-	return r;
+	kfree(ah);
+	sc->sc_ah = NULL;
+
+	return ret;
 }
 
-void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		IEEE80211_HW_SIGNAL_DBM |
@@ -621,85 +655,85 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 			&sc->sbands[IEEE80211_BAND_5GHZ];
+
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
+			setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+		if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
+			setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+	}
+
+	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
 }
 
-/* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 		    const struct ath_bus_ops *bus_ops)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	struct ath_common *common;
 	struct ath_hw *ah;
-	int error = 0, i;
+	int error = 0;
 	struct ath_regulatory *reg;
 
-	dev_dbg(sc->dev, "Attach ATH hw\n");
-
-	error = ath_init_softc(devid, sc, subsysid, bus_ops);
+	/* Bring up device */
+	error = ath9k_init_softc(devid, sc, subsysid, bus_ops);
 	if (error != 0)
-		return error;
+		goto error_init;
 
 	ah = sc->sc_ah;
 	common = ath9k_hw_common(ah);
+	ath9k_set_hw_capab(sc, hw);
 
-	/* get mac address from hardware and set in mac80211 */
-
-	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
-
-	ath_set_hw_capab(sc, hw);
-
+	/* Initialize regulatory */
 	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
 			      ath9k_reg_notifier);
 	if (error)
-		return error;
+		goto error_regd;
 
 	reg = &common->regulatory;
 
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
-			setup_ht_cap(sc,
-				     &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
-			setup_ht_cap(sc,
-				     &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
-	}
-
-	/* initialize tx/rx engine */
+	/* Setup TX DMA */
 	error = ath_tx_init(sc, ATH_TXBUF);
 	if (error != 0)
-		goto error_attach;
+		goto error_tx;
 
+	/* Setup RX DMA */
 	error = ath_rx_init(sc, ATH_RXBUF);
 	if (error != 0)
-		goto error_attach;
-
-	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
-	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
-	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
+		goto error_rx;
 
+	/* Register with mac80211 */
 	error = ieee80211_register_hw(hw);
+	if (error)
+		goto error_register;
 
+	/* Handle world regulatory */
 	if (!ath_is_world_regd(reg)) {
 		error = regulatory_hint(hw->wiphy, reg->alpha2);
 		if (error)
-			goto error_attach;
+			goto error_world;
 	}
 
-	/* Initialize LED control */
-	ath_init_leds(sc);
+	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
+	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
+	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
 
+	ath_init_leds(sc);
 	ath_start_rfkill_poll(sc);
 
 	return 0;
 
-error_attach:
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	ath9k_uninit_hw(sc);
-
+error_world:
+	ieee80211_unregister_hw(hw);
+error_register:
+	ath_rx_cleanup(sc);
+error_rx:
+	ath_tx_cleanup(sc);
+error_tx:
+	/* Nothing */
+error_regd:
+	ath9k_deinit_softc(sc);
+error_init:
 	return error;
 }
 
@@ -707,29 +741,34 @@ error_attach:
 /*     De-Initialization     */
 /*****************************/
 
-static void ath9k_uninit_hw(struct ath_softc *sc)
+static void ath9k_deinit_softc(struct ath_softc *sc)
 {
-	struct ath_hw *ah = sc->sc_ah;
+	int i = 0;
 
-	BUG_ON(!ah);
+        if ((sc->btcoex.no_stomp_timer) &&
+	    sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+		ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
 
-	ath9k_exit_debug(ah);
-	ath9k_hw_detach(ah);
-	sc->sc_ah = NULL;
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+	ath9k_exit_debug(sc->sc_ah);
+	ath9k_hw_deinit(sc->sc_ah);
+
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
 }
 
-static void ath_clean_core(struct ath_softc *sc)
+void ath9k_deinit_device(struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
-	struct ath_hw *ah = sc->sc_ah;
 	int i = 0;
 
 	ath9k_ps_wakeup(sc);
 
-	dev_dbg(sc->dev, "Detach ATH hw\n");
-
-	ath_deinit_leds(sc);
 	wiphy_rfkill_stop_polling(sc->hw->wiphy);
+	ath_deinit_leds(sc);
 
 	for (i = 0; i < sc->num_sec_wiphy; i++) {
 		struct ath_wiphy *aphy = sc->sec_wiphy[i];
@@ -739,24 +778,12 @@ static void ath_clean_core(struct ath_softc *sc)
 		ieee80211_unregister_hw(aphy->hw);
 		ieee80211_free_hw(aphy->hw);
 	}
+	kfree(sc->sec_wiphy);
+
 	ieee80211_unregister_hw(hw);
 	ath_rx_cleanup(sc);
 	ath_tx_cleanup(sc);
-
-	tasklet_kill(&sc->intr_tq);
-	tasklet_kill(&sc->bcon_tasklet);
-
-	if (!(sc->sc_flags & SC_OP_INVALID))
-		ath9k_setpower(sc, ATH9K_PM_AWAKE);
-
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	if ((sc->btcoex.no_stomp_timer) &&
-	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
-		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
+	ath9k_deinit_softc(sc);
 }
 
 void ath_descdma_cleanup(struct ath_softc *sc,
@@ -771,26 +798,6 @@ void ath_descdma_cleanup(struct ath_softc *sc,
 	memset(dd, 0, sizeof(*dd));
 }
 
-void ath_detach(struct ath_softc *sc)
-{
-	ath_clean_core(sc);
-	ath9k_uninit_hw(sc);
-}
-
-void ath_cleanup(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	ath_clean_core(sc);
-	free_irq(sc->irq, sc);
-	ath_bus_cleanup(common);
-	kfree(sc->sec_wiphy);
-	ieee80211_free_hw(sc->hw);
-
-	ath9k_uninit_hw(sc);
-}
-
 /************************/
 /*     Module Hooks     */
 /************************/
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f7af5ea54753..95b9a07597ef 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -113,25 +113,22 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	u16 subsysid;
 	u32 val;
 	int ret = 0;
-	struct ath_hw *ah;
 	char hw_name[64];
 
 	if (pci_enable_device(pdev))
 		return -EIO;
 
 	ret =  pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-
 	if (ret) {
 		printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
-		goto bad;
+		goto err_dma;
 	}
 
 	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-
 	if (ret) {
 		printk(KERN_ERR "ath9k: 32-bit DMA consistent "
 			"DMA enable failed\n");
-		goto bad;
+		goto err_dma;
 	}
 
 	/*
@@ -171,22 +168,22 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (ret) {
 		dev_err(&pdev->dev, "PCI memory region reserve error\n");
 		ret = -ENODEV;
-		goto bad;
+		goto err_region;
 	}
 
 	mem = pci_iomap(pdev, 0, 0);
 	if (!mem) {
 		printk(KERN_ERR "PCI memory map error\n") ;
 		ret = -EIO;
-		goto bad1;
+		goto err_iomap;
 	}
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
 				sizeof(struct ath_softc), &ath9k_ops);
 	if (!hw) {
-		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+		dev_err(&pdev->dev, "No memory for ieee80211_hw\n");
 		ret = -ENOMEM;
-		goto bad2;
+		goto err_alloc_hw;
 	}
 
 	SET_IEEE80211_DEV(hw, &pdev->dev);
@@ -201,25 +198,22 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->dev = &pdev->dev;
 	sc->mem = mem;
 
-	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
-	ret = ath_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to initialize device\n");
-		goto bad3;
-	}
-
-	/* setup interrupt service routine */
-
 	ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
-		goto bad4;
+		goto err_irq;
 	}
 
 	sc->irq = pdev->irq;
 
-	ah = sc->sc_ah;
-	ath9k_hw_name(ah, hw_name, sizeof(hw_name));
+	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
+	ret = ath9k_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize device\n");
+		goto err_init;
+	}
+
+	ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
 	printk(KERN_INFO
 	       "%s: %s mem=0x%lx, irq=%d\n",
 	       wiphy_name(hw->wiphy),
@@ -227,15 +221,18 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	       (unsigned long)mem, pdev->irq);
 
 	return 0;
-bad4:
-	ath_detach(sc);
-bad3:
+
+err_init:
+	free_irq(sc->irq, sc);
+err_irq:
 	ieee80211_free_hw(hw);
-bad2:
+err_alloc_hw:
 	pci_iounmap(pdev, mem);
-bad1:
+err_iomap:
 	pci_release_region(pdev, 0);
-bad:
+err_region:
+	/* Nothing */
+err_dma:
 	pci_disable_device(pdev);
 	return ret;
 }
@@ -245,8 +242,12 @@ static void ath_pci_remove(struct pci_dev *pdev)
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
-	ath_cleanup(sc);
+	ath9k_deinit_device(sc);
+	free_irq(sc->irq, sc);
+	ieee80211_free_hw(sc->hw);
+	ath_bus_cleanup(common);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index cd26caaf44e7..a43fbf84dab9 100644
--- a/drivers/net/wireless/ath/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
@@ -152,7 +152,7 @@ int ath9k_wiphy_add(struct ath_softc *sc)
 
 	SET_IEEE80211_PERM_ADDR(hw, addr);
 
-	ath_set_hw_capab(sc, hw);
+	ath9k_set_hw_capab(sc, hw);
 
 	error = ieee80211_register_hw(hw);
 
-- 
cgit v1.2.3


From cc9c378aa57817003a094e4bb9a953337ebf035a Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:09 +0530
Subject: ath9k: Fix queue handling

The TX queues have to be stopped during an
internal reset. Not handling this would result
in packet loss - fix this.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 974de2056b4a..1f7222aef89f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -944,6 +944,8 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	/* Stop ANI */
 	del_timer_sync(&common->ani.timer);
 
+	ieee80211_stop_queues(hw);
+
 	ath9k_hw_set_interrupts(ah, 0);
 	ath_drain_all_txq(sc, retry_tx);
 	ath_stoprecv(sc);
@@ -985,6 +987,8 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 		}
 	}
 
+	ieee80211_wake_queues(hw);
+
 	/* Start ANI */
 	ath_start_ani(common);
 
-- 
cgit v1.2.3


From 1395d3f00a4164caae168b041855d48e0fa9ea4c Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:11 +0530
Subject: ath9k: Add debugfs file for RX errors

This file can be used to track frame reception errors.
PHY error counts are also added.

Location: ath9k/phy#/recv

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 118 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/debug.h |  32 +++++++++
 drivers/net/wireless/ath/ath9k/mac.h   |  34 ++++++++++
 drivers/net/wireless/ath/ath9k/recv.c  |   2 +
 4 files changed, 186 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 592f1b70f55a..9489b6b25b5f 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -580,6 +580,116 @@ static const struct file_operations fops_xmit = {
 	.owner = THIS_MODULE
 };
 
+static ssize_t read_file_recv(struct file *file, char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+#define PHY_ERR(s, p) \
+	len += snprintf(buf + len, size - len, "%18s : %10u\n", s, \
+			sc->debug.stats.rxstats.phy_err_stats[p]);
+
+	struct ath_softc *sc = file->private_data;
+	char *buf;
+	unsigned int len = 0, size = 1152;
+	ssize_t retval = 0;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (buf == NULL)
+		return 0;
+
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "CRC ERR",
+			sc->debug.stats.rxstats.crc_err);
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "DECRYPT CRC ERR",
+			sc->debug.stats.rxstats.decrypt_crc_err);
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "PHY ERR",
+			sc->debug.stats.rxstats.phy_err);
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "MIC ERR",
+			sc->debug.stats.rxstats.mic_err);
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "PRE-DELIM CRC ERR",
+			sc->debug.stats.rxstats.pre_delim_crc_err);
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "POST-DELIM CRC ERR",
+			sc->debug.stats.rxstats.post_delim_crc_err);
+	len += snprintf(buf + len, size - len,
+			"%18s : %10u\n", "DECRYPT BUSY ERR",
+			sc->debug.stats.rxstats.decrypt_busy_err);
+
+	PHY_ERR("UNDERRUN", ATH9K_PHYERR_UNDERRUN);
+	PHY_ERR("TIMING", ATH9K_PHYERR_TIMING);
+	PHY_ERR("PARITY", ATH9K_PHYERR_PARITY);
+	PHY_ERR("RATE", ATH9K_PHYERR_RATE);
+	PHY_ERR("LENGTH", ATH9K_PHYERR_LENGTH);
+	PHY_ERR("RADAR", ATH9K_PHYERR_RADAR);
+	PHY_ERR("SERVICE", ATH9K_PHYERR_SERVICE);
+	PHY_ERR("TOR", ATH9K_PHYERR_TOR);
+	PHY_ERR("OFDM-TIMING", ATH9K_PHYERR_OFDM_TIMING);
+	PHY_ERR("OFDM-SIGNAL-PARITY", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
+	PHY_ERR("OFDM-RATE", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
+	PHY_ERR("OFDM-LENGTH", ATH9K_PHYERR_OFDM_LENGTH_ILLEGAL);
+	PHY_ERR("OFDM-POWER-DROP", ATH9K_PHYERR_OFDM_POWER_DROP);
+	PHY_ERR("OFDM-SERVICE", ATH9K_PHYERR_OFDM_SERVICE);
+	PHY_ERR("OFDM-RESTART", ATH9K_PHYERR_OFDM_RESTART);
+	PHY_ERR("FALSE-RADAR-EXT", ATH9K_PHYERR_FALSE_RADAR_EXT);
+	PHY_ERR("CCK-TIMING", ATH9K_PHYERR_CCK_TIMING);
+	PHY_ERR("CCK-HEADER-CRC", ATH9K_PHYERR_CCK_HEADER_CRC);
+	PHY_ERR("CCK-RATE", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
+	PHY_ERR("CCK-SERVICE", ATH9K_PHYERR_CCK_SERVICE);
+	PHY_ERR("CCK-RESTART", ATH9K_PHYERR_CCK_RESTART);
+	PHY_ERR("CCK-LENGTH", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
+	PHY_ERR("CCK-POWER-DROP", ATH9K_PHYERR_CCK_POWER_DROP);
+	PHY_ERR("HT-CRC", ATH9K_PHYERR_HT_CRC_ERROR);
+	PHY_ERR("HT-LENGTH", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
+	PHY_ERR("HT-RATE", ATH9K_PHYERR_HT_RATE_ILLEGAL);
+
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+
+	return retval;
+
+#undef PHY_ERR
+}
+
+void ath_debug_stat_rx(struct ath_softc *sc, struct ath_buf *bf)
+{
+#define RX_STAT_INC(c) sc->debug.stats.rxstats.c++
+#define RX_PHY_ERR_INC(c) sc->debug.stats.rxstats.phy_err_stats[c]++
+
+	struct ath_desc *ds = bf->bf_desc;
+	u32 phyerr;
+
+	if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC)
+		RX_STAT_INC(crc_err);
+	if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT)
+		RX_STAT_INC(decrypt_crc_err);
+	if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC)
+		RX_STAT_INC(mic_err);
+	if (ds->ds_rxstat.rs_status & ATH9K_RX_DELIM_CRC_PRE)
+		RX_STAT_INC(pre_delim_crc_err);
+	if (ds->ds_rxstat.rs_status & ATH9K_RX_DELIM_CRC_POST)
+		RX_STAT_INC(post_delim_crc_err);
+	if (ds->ds_rxstat.rs_status & ATH9K_RX_DECRYPT_BUSY)
+		RX_STAT_INC(decrypt_busy_err);
+
+	if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) {
+		RX_STAT_INC(phy_err);
+		phyerr = ds->ds_rxstat.rs_phyerr & 0x24;
+		RX_PHY_ERR_INC(phyerr);
+	}
+
+#undef RX_STAT_INC
+#undef RX_PHY_ERR_INC
+}
+
+static const struct file_operations fops_recv = {
+	.read = read_file_recv,
+	.open = ath9k_debugfs_open,
+	.owner = THIS_MODULE
+};
+
 int ath9k_init_debug(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
@@ -632,6 +742,13 @@ int ath9k_init_debug(struct ath_hw *ah)
 	if (!sc->debug.debugfs_xmit)
 		goto err;
 
+	sc->debug.debugfs_recv = debugfs_create_file("recv",
+						     S_IRUSR,
+						     sc->debug.debugfs_phy,
+						     sc, &fops_recv);
+	if (!sc->debug.debugfs_recv)
+		goto err;
+
 	return 0;
 err:
 	ath9k_exit_debug(ah);
@@ -643,6 +760,7 @@ void ath9k_exit_debug(struct ath_hw *ah)
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_softc *sc = (struct ath_softc *) common->priv;
 
+	debugfs_remove(sc->debug.debugfs_recv);
 	debugfs_remove(sc->debug.debugfs_xmit);
 	debugfs_remove(sc->debug.debugfs_wiphy);
 	debugfs_remove(sc->debug.debugfs_rcstat);
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 536663e3ee11..86780e68b31e 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -116,10 +116,35 @@ struct ath_tx_stats {
 	u32 delim_underrun;
 };
 
+/**
+ * struct ath_rx_stats - RX Statistics
+ * @crc_err: No. of frames with incorrect CRC value
+ * @decrypt_crc_err: No. of frames whose CRC check failed after
+	decryption process completed
+ * @phy_err: No. of frames whose reception failed because the PHY
+	encountered an error
+ * @mic_err: No. of frames with incorrect TKIP MIC verification failure
+ * @pre_delim_crc_err: Pre-Frame delimiter CRC error detections
+ * @post_delim_crc_err: Post-Frame delimiter CRC error detections
+ * @decrypt_busy_err: Decryption interruptions counter
+ * @phy_err_stats: Individual PHY error statistics
+ */
+struct ath_rx_stats {
+	u32 crc_err;
+	u32 decrypt_crc_err;
+	u32 phy_err;
+	u32 mic_err;
+	u32 pre_delim_crc_err;
+	u32 post_delim_crc_err;
+	u32 decrypt_busy_err;
+	u32 phy_err_stats[ATH9K_PHYERR_MAX];
+};
+
 struct ath_stats {
 	struct ath_interrupt_stats istats;
 	struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
 	struct ath_tx_stats txstats[ATH9K_NUM_TX_QUEUES];
+	struct ath_rx_stats rxstats;
 };
 
 struct ath9k_debug {
@@ -130,6 +155,7 @@ struct ath9k_debug {
 	struct dentry *debugfs_rcstat;
 	struct dentry *debugfs_wiphy;
 	struct dentry *debugfs_xmit;
+	struct dentry *debugfs_recv;
 	struct ath_stats stats;
 };
 
@@ -142,6 +168,7 @@ void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
 void ath_debug_stat_rc(struct ath_softc *sc, int final_rate);
 void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq,
 		       struct ath_buf *bf);
+void ath_debug_stat_rx(struct ath_softc *sc, struct ath_buf *bf);
 void ath_debug_stat_retries(struct ath_softc *sc, int rix,
 			    int xretries, int retries, u8 per);
 
@@ -181,6 +208,11 @@ static inline void ath_debug_stat_tx(struct ath_softc *sc,
 {
 }
 
+static inline void ath_debug_stat_rx(struct ath_softc *sc,
+				     struct ath_buf *bf)
+{
+}
+
 static inline void ath_debug_stat_retries(struct ath_softc *sc, int rix,
 					  int xretries, int retries, u8 per)
 {
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index e185479e295e..29851e6376a9 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -167,6 +167,40 @@ struct ath_rx_status {
 #define ATH9K_RXKEYIX_INVALID	((u8)-1)
 #define ATH9K_TXKEYIX_INVALID	((u32)-1)
 
+enum ath9k_phyerr {
+	ATH9K_PHYERR_UNDERRUN             = 0,  /* Transmit underrun */
+	ATH9K_PHYERR_TIMING               = 1,  /* Timing error */
+	ATH9K_PHYERR_PARITY               = 2,  /* Illegal parity */
+	ATH9K_PHYERR_RATE                 = 3,  /* Illegal rate */
+	ATH9K_PHYERR_LENGTH               = 4,  /* Illegal length */
+	ATH9K_PHYERR_RADAR                = 5,  /* Radar detect */
+	ATH9K_PHYERR_SERVICE              = 6,  /* Illegal service */
+	ATH9K_PHYERR_TOR                  = 7,  /* Transmit override receive */
+
+	ATH9K_PHYERR_OFDM_TIMING          = 17,
+	ATH9K_PHYERR_OFDM_SIGNAL_PARITY   = 18,
+	ATH9K_PHYERR_OFDM_RATE_ILLEGAL    = 19,
+	ATH9K_PHYERR_OFDM_LENGTH_ILLEGAL  = 20,
+	ATH9K_PHYERR_OFDM_POWER_DROP      = 21,
+	ATH9K_PHYERR_OFDM_SERVICE         = 22,
+	ATH9K_PHYERR_OFDM_RESTART         = 23,
+	ATH9K_PHYERR_FALSE_RADAR_EXT      = 24,
+
+	ATH9K_PHYERR_CCK_TIMING           = 25,
+	ATH9K_PHYERR_CCK_HEADER_CRC       = 26,
+	ATH9K_PHYERR_CCK_RATE_ILLEGAL     = 27,
+	ATH9K_PHYERR_CCK_SERVICE          = 30,
+	ATH9K_PHYERR_CCK_RESTART          = 31,
+	ATH9K_PHYERR_CCK_LENGTH_ILLEGAL   = 32,
+	ATH9K_PHYERR_CCK_POWER_DROP       = 33,
+
+	ATH9K_PHYERR_HT_CRC_ERROR         = 34,
+	ATH9K_PHYERR_HT_LENGTH_ILLEGAL    = 35,
+	ATH9K_PHYERR_HT_RATE_ILLEGAL      = 36,
+
+	ATH9K_PHYERR_MAX                  = 37,
+};
+
 struct ath_desc {
 	u32 ds_link;
 	u32 ds_data;
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 17b0a6dd8caf..40b5d05edcce 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -571,6 +571,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 		hw = ath_get_virt_hw(sc, hdr);
 		rx_stats = &ds->ds_rxstat;
 
+		ath_debug_stat_rx(sc, bf);
+
 		/*
 		 * If we're asked to flush receive queue, directly
 		 * chain it back at the queue without processing it.
-- 
cgit v1.2.3


From 199afd9d89b18e8b530734ed73788518e19bed9b Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Fri, 8 Jan 2010 10:36:13 +0530
Subject: ath9k: Fix monitor mode handling

mac80211 passes appropriate flags indicating whether
monitor mode is being used. Use this to set the HW opmode.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 1f7222aef89f..b39c7bc41143 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1581,6 +1581,14 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		}
 	}
 
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		if (conf->flags & IEEE80211_CONF_MONITOR) {
+			ath_print(common, ATH_DBG_CONFIG,
+				  "HW opmode set to Monitor mode\n");
+			sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+		}
+	}
+
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 		struct ieee80211_channel *curchan = hw->conf.channel;
 		int pos = curchan->hw_value;
-- 
cgit v1.2.3


From c2c2b12a8b6cd23d4abbc086642647c656bf406c Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:27:59 +0100
Subject: mwl8k: minor cleanups

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a04863633d1a..cc160418e6c5 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -208,10 +208,7 @@ struct mwl8k_priv {
 
 /* Per interface specific private data */
 struct mwl8k_vif {
-	/* Local MAC address.  */
-	u8 mac_addr[ETH_ALEN];
-
-	/* Non AMPDU sequence number assigned by driver */
+	/* Non AMPDU sequence number assigned by driver.  */
 	u16 seqno;
 };
 #define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
@@ -2287,8 +2284,8 @@ struct mwl8k_cmd_set_rts_threshold {
 	__le16 threshold;
 } __attribute__((packed));
 
-static int mwl8k_cmd_set_rts_threshold(struct ieee80211_hw *hw,
-				       u16 action, u16 threshold)
+static int
+mwl8k_cmd_set_rts_threshold(struct ieee80211_hw *hw, int rts_thresh)
 {
 	struct mwl8k_cmd_set_rts_threshold *cmd;
 	int rc;
@@ -2299,8 +2296,8 @@ static int mwl8k_cmd_set_rts_threshold(struct ieee80211_hw *hw,
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_RTS_THRESHOLD);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(action);
-	cmd->threshold = cpu_to_le16(threshold);
+	cmd->action = cpu_to_le16(MWL8K_CMD_SET);
+	cmd->threshold = cpu_to_le16(rts_thresh);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2955,14 +2952,13 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 		return -EINVAL;
 	}
 
+	/* Set the mac address.  */
+	mwl8k_cmd_set_mac_addr(hw, vif->addr);
+
 	/* Clean out driver private area */
 	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 
-	/* Set and save the mac address */
-	mwl8k_cmd_set_mac_addr(hw, vif->addr);
-	memcpy(mwl8k_vif->mac_addr, vif->addr, ETH_ALEN);
-
 	/* Set Initial sequence number to zero */
 	mwl8k_vif->seqno = 0;
 
@@ -2977,9 +2973,6 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 {
 	struct mwl8k_priv *priv = hw->priv;
 
-	if (priv->vif == NULL)
-		return;
-
 	mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
 
 	priv->vif = NULL;
@@ -3252,7 +3245,7 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 
 static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 {
-	return mwl8k_cmd_set_rts_threshold(hw, MWL8K_CMD_SET, value);
+	return mwl8k_cmd_set_rts_threshold(hw, value);
 }
 
 struct mwl8k_sta_notify_item
@@ -3669,7 +3662,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	/*
 	 * Temporarily enable interrupts.  Initial firmware host
-	 * commands use interrupts and avoids polling.  Disable
+	 * commands use interrupts and avoid polling.  Disable
 	 * interrupts when done.
 	 */
 	iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
-- 
cgit v1.2.3


From b569e924a9ea7c6f03dcf9b8a98d78d341925b87 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:28:14 +0100
Subject: mwl8k: undo transmit queue 0/1 swapping in
 mwl8k_cmd_set_edca_params()

The comment and code in mwl8k_cmd_set_edca_params() suggest that the
mapping between SET_EDCA_PARAMS queue numbers and transmit rings isn't
actually 1:1, while tests show that the mapping is in fact 1:1.  So,
get rid of the transmit queue 0/1 swapping.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index cc160418e6c5..3f5fdb69a2be 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2397,12 +2397,6 @@ mwl8k_cmd_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
 	if (cmd == NULL)
 		return -ENOMEM;
 
-	/*
-	 * Queues 0 (BE) and 1 (BK) are swapped in hardware for
-	 * this call.
-	 */
-	qnum ^= !(qnum >> 1);
-
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_EDCA_PARAMS);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->action = cpu_to_le16(MWL8K_SET_EDCA_ALL);
-- 
cgit v1.2.3


From 62abd3cfb2f1a0ab1963ac4c4087c477da6b1f2a Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:28:34 +0100
Subject: mwl8k: bump the transmit wait timeout to 5 seconds

While it is reasonable to expect that at least one transmit ring entry
will be processed per second while we are waiting for the transmit
rings to drain, the firmware can end up doing batching of transmit ring
status writeback, which means that the transmit rings can appear stuck
for more than a second at a time.

Bump the TX drain wait timeout up from 1 to 5 seconds to account for
this.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 3f5fdb69a2be..8f5f7c9f75f7 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1173,7 +1173,7 @@ static void mwl8k_dump_tx_rings(struct ieee80211_hw *hw)
 /*
  * Must be called with priv->fw_mutex held and tx queues stopped.
  */
-#define MWL8K_TX_WAIT_TIMEOUT_MS	1000
+#define MWL8K_TX_WAIT_TIMEOUT_MS	5000
 
 static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 {
-- 
cgit v1.2.3


From b71ed2c6ce8b5c3782ed70d67dc9adbd7ed07684 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:30:16 +0100
Subject: mwl8k: simplify mwl8k_cmd_use_fixed_rate()

As we always use the auto rate adaptation feature and never pass in
a rate table, USE_FIXED_RATE can be simplified somewhat.  While we're
at it, rename it to *_sta, as this is the STA version of the command.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 88 +++++++++++---------------------------------
 1 file changed, 22 insertions(+), 66 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 8f5f7c9f75f7..20e7cf2e266c 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2482,49 +2482,30 @@ static int mwl8k_cmd_mimo_config(struct ieee80211_hw *hw, __u8 rx, __u8 tx)
 }
 
 /*
- * CMD_USE_FIXED_RATE.
+ * CMD_USE_FIXED_RATE (STA version).
  */
-#define MWL8K_RATE_TABLE_SIZE	8
-#define MWL8K_UCAST_RATE	0
-#define MWL8K_USE_AUTO_RATE	0x0002
-
-struct mwl8k_rate_entry {
-	/* Set to 1 if HT rate, 0 if legacy.  */
-	__le32	is_ht_rate;
-
-	/* Set to 1 to use retry_count field.  */
-	__le32	enable_retry;
-
-	/* Specified legacy rate or MCS.  */
-	__le32	rate;
-
-	/* Number of allowed retries.  */
-	__le32	retry_count;
-} __attribute__((packed));
-
-struct mwl8k_rate_table {
-	/* 1 to allow specified rate and below */
-	__le32	allow_rate_drop;
-	__le32	num_rates;
-	struct mwl8k_rate_entry rate_entry[MWL8K_RATE_TABLE_SIZE];
+struct mwl8k_cmd_use_fixed_rate_sta {
+	struct mwl8k_cmd_pkt header;
+	__le32 action;
+	__le32 allow_rate_drop;
+	__le32 num_rates;
+	struct {
+		__le32 is_ht_rate;
+		__le32 enable_retry;
+		__le32 rate;
+		__le32 retry_count;
+	} rate_entry[8];
+	__le32 rate_type;
+	__le32 reserved1;
+	__le32 reserved2;
 } __attribute__((packed));
 
-struct mwl8k_cmd_use_fixed_rate {
-	struct	mwl8k_cmd_pkt header;
-	__le32	action;
-	struct mwl8k_rate_table rate_table;
-
-	/* Unicast, Broadcast or Multicast */
-	__le32	rate_type;
-	__le32	reserved1;
-	__le32	reserved2;
-} __attribute__((packed));
+#define MWL8K_USE_AUTO_RATE	0x0002
+#define MWL8K_UCAST_RATE	0
 
-static int mwl8k_cmd_use_fixed_rate(struct ieee80211_hw *hw,
-	u32 action, u32 rate_type, struct mwl8k_rate_table *rate_table)
+static int mwl8k_cmd_use_fixed_rate_sta(struct ieee80211_hw *hw)
 {
-	struct mwl8k_cmd_use_fixed_rate *cmd;
-	int count;
+	struct mwl8k_cmd_use_fixed_rate_sta *cmd;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2533,32 +2514,8 @@ static int mwl8k_cmd_use_fixed_rate(struct ieee80211_hw *hw,
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_USE_FIXED_RATE);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-
-	cmd->action = cpu_to_le32(action);
-	cmd->rate_type = cpu_to_le32(rate_type);
-
-	if (rate_table != NULL) {
-		/*
-		 * Copy over each field manually so that endian
-		 * conversion can be done.
-		 */
-		cmd->rate_table.allow_rate_drop =
-				cpu_to_le32(rate_table->allow_rate_drop);
-		cmd->rate_table.num_rates =
-				cpu_to_le32(rate_table->num_rates);
-
-		for (count = 0; count < rate_table->num_rates; count++) {
-			struct mwl8k_rate_entry *dst =
-				&cmd->rate_table.rate_entry[count];
-			struct mwl8k_rate_entry *src =
-				&rate_table->rate_entry[count];
-
-			dst->is_ht_rate = cpu_to_le32(src->is_ht_rate);
-			dst->enable_retry = cpu_to_le32(src->enable_retry);
-			dst->rate = cpu_to_le32(src->rate);
-			dst->retry_count = cpu_to_le32(src->retry_count);
-		}
-	}
+	cmd->action = cpu_to_le32(MWL8K_USE_AUTO_RATE);
+	cmd->rate_type = cpu_to_le32(MWL8K_UCAST_RATE);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -3062,8 +3019,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		if (rc)
 			goto out;
 
-		rc = mwl8k_cmd_use_fixed_rate(hw, MWL8K_USE_AUTO_RATE,
-			MWL8K_UCAST_RATE, NULL);
+		rc = mwl8k_cmd_use_fixed_rate_sta(hw);
 		if (rc)
 			goto out;
 	}
-- 
cgit v1.2.3


From 088aab8b62666a002907c912cd346ae6dc9f42b7 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:30:36 +0100
Subject: mwl8k: add the AP version of USE_FIXED_RATE

As with the STA version, unicast will use auto rate adaptation, but
the AP version allows setting the rates to be used for management and
multicast transmissions, which can be set based on the BSS basic rate
set.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 20e7cf2e266c..ec79033801ab 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2523,6 +2523,47 @@ static int mwl8k_cmd_use_fixed_rate_sta(struct ieee80211_hw *hw)
 	return rc;
 }
 
+/*
+ * CMD_USE_FIXED_RATE (AP version).
+ */
+struct mwl8k_cmd_use_fixed_rate_ap {
+	struct mwl8k_cmd_pkt header;
+	__le32 action;
+	__le32 allow_rate_drop;
+	__le32 num_rates;
+	struct mwl8k_rate_entry_ap {
+		__le32 is_ht_rate;
+		__le32 enable_retry;
+		__le32 rate;
+		__le32 retry_count;
+	} rate_entry[4];
+	u8 multicast_rate;
+	u8 multicast_rate_type;
+	u8 management_rate;
+} __attribute__((packed));
+
+static int
+mwl8k_cmd_use_fixed_rate_ap(struct ieee80211_hw *hw, int mcast, int mgmt)
+{
+	struct mwl8k_cmd_use_fixed_rate_ap *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_USE_FIXED_RATE);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le32(MWL8K_USE_AUTO_RATE);
+	cmd->multicast_rate = mcast;
+	cmd->management_rate = mgmt;
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
 /*
  * CMD_ENABLE_SNIFFER.
  */
-- 
cgit v1.2.3


From 3f5610ff560aeaccf051a6f93f25535c219599a0 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:30:58 +0100
Subject: mwl8k: implement AP firmware station database maintenance

STA firmware uses UPDATE_STADB to manipulate the hardware station
database, whereas AP firmware uses SET_NEW_STN -- this implements the
latter, and hooks it into mwl8k_sta_notify(), to be used if we're
running on AP firmware.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 134 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 117 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index ec79033801ab..f0026f33232d 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -281,6 +281,7 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 #define MWL8K_CMD_ENABLE_SNIFFER	0x0150
 #define MWL8K_CMD_SET_MAC_ADDR		0x0202
 #define MWL8K_CMD_SET_RATEADAPT_MODE	0x0203
+#define MWL8K_CMD_SET_NEW_STN		0x1111
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 
 static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
@@ -313,6 +314,7 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
 		MWL8K_CMDNAME(ENABLE_SNIFFER);
 		MWL8K_CMDNAME(SET_MAC_ADDR);
 		MWL8K_CMDNAME(SET_RATEADAPT_MODE);
+		MWL8K_CMDNAME(SET_NEW_STN);
 		MWL8K_CMDNAME(UPDATE_STADB);
 	default:
 		snprintf(buf, bufsize, "0x%x", cmd);
@@ -2659,6 +2661,90 @@ static int mwl8k_cmd_set_rateadapt_mode(struct ieee80211_hw *hw, __u16 mode)
 	return rc;
 }
 
+/*
+ * CMD_SET_NEW_STN.
+ */
+struct mwl8k_cmd_set_new_stn {
+	struct mwl8k_cmd_pkt header;
+	__le16 aid;
+	__u8 mac_addr[6];
+	__le16 stn_id;
+	__le16 action;
+	__le16 rsvd;
+	__le32 legacy_rates;
+	__u8 ht_rates[4];
+	__le16 cap_info;
+	__le16 ht_capabilities_info;
+	__u8 mac_ht_param_info;
+	__u8 rev;
+	__u8 control_channel;
+	__u8 add_channel;
+	__le16 op_mode;
+	__le16 stbc;
+	__u8 add_qos_info;
+	__u8 is_qos_sta;
+	__le32 fw_sta_ptr;
+} __attribute__((packed));
+
+#define MWL8K_STA_ACTION_ADD		0
+#define MWL8K_STA_ACTION_REMOVE		2
+
+static int mwl8k_cmd_set_new_stn_add(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_sta *sta)
+{
+	struct mwl8k_cmd_set_new_stn *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_NEW_STN);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->aid = cpu_to_le16(sta->aid);
+	memcpy(cmd->mac_addr, sta->addr, ETH_ALEN);
+	cmd->stn_id = cpu_to_le16(sta->aid);
+	cmd->action = cpu_to_le16(MWL8K_STA_ACTION_ADD);
+	cmd->legacy_rates = cpu_to_le32(sta->supp_rates[IEEE80211_BAND_2GHZ]);
+	if (sta->ht_cap.ht_supported) {
+		cmd->ht_rates[0] = sta->ht_cap.mcs.rx_mask[0];
+		cmd->ht_rates[1] = sta->ht_cap.mcs.rx_mask[1];
+		cmd->ht_rates[2] = sta->ht_cap.mcs.rx_mask[2];
+		cmd->ht_rates[3] = sta->ht_cap.mcs.rx_mask[3];
+		cmd->ht_capabilities_info = cpu_to_le16(sta->ht_cap.cap);
+		cmd->mac_ht_param_info = (sta->ht_cap.ampdu_factor & 3) |
+			((sta->ht_cap.ampdu_density & 7) << 2);
+		cmd->is_qos_sta = 1;
+	}
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+static int mwl8k_cmd_set_new_stn_del(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif, u8 *addr)
+{
+	struct mwl8k_cmd_set_new_stn *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_NEW_STN);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	memcpy(cmd->mac_addr, addr, ETH_ALEN);
+	cmd->action = cpu_to_le16(MWL8K_STA_ACTION_REMOVE);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
 /*
  * CMD_UPDATE_STADB.
  */
@@ -3247,6 +3333,36 @@ struct mwl8k_sta_notify_item
 	struct ieee80211_sta sta;
 };
 
+static void
+mwl8k_do_sta_notify(struct ieee80211_hw *hw, struct mwl8k_sta_notify_item *s)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	/*
+	 * STA firmware uses UPDATE_STADB, AP firmware uses SET_NEW_STN.
+	 */
+	if (!priv->ap_fw && s->cmd == STA_NOTIFY_ADD) {
+		int rc;
+
+		rc = mwl8k_cmd_update_stadb_add(hw, s->vif, &s->sta);
+		if (rc >= 0) {
+			struct ieee80211_sta *sta;
+
+			rcu_read_lock();
+			sta = ieee80211_find_sta(s->vif, s->sta.addr);
+			if (sta != NULL)
+				MWL8K_STA(sta)->peer_id = rc;
+			rcu_read_unlock();
+		}
+	} else if (!priv->ap_fw && s->cmd == STA_NOTIFY_REMOVE) {
+		mwl8k_cmd_update_stadb_del(hw, s->vif, s->sta.addr);
+	} else if (priv->ap_fw && s->cmd == STA_NOTIFY_ADD) {
+		mwl8k_cmd_set_new_stn_add(hw, s->vif, &s->sta);
+	} else if (priv->ap_fw && s->cmd == STA_NOTIFY_REMOVE) {
+		mwl8k_cmd_set_new_stn_del(hw, s->vif, s->sta.addr);
+	}
+}
+
 static void mwl8k_sta_notify_worker(struct work_struct *work)
 {
 	struct mwl8k_priv *priv =
@@ -3263,23 +3379,7 @@ static void mwl8k_sta_notify_worker(struct work_struct *work)
 
 		spin_unlock_bh(&priv->sta_notify_list_lock);
 
-		if (s->cmd == STA_NOTIFY_ADD) {
-			int rc;
-
-			rc = mwl8k_cmd_update_stadb_add(hw, s->vif, &s->sta);
-			if (rc >= 0) {
-				struct ieee80211_sta *sta;
-
-				rcu_read_lock();
-				sta = ieee80211_find_sta(s->vif, s->sta.addr);
-				if (sta != NULL)
-					MWL8K_STA(sta)->peer_id = rc;
-				rcu_read_unlock();
-			}
-		} else {
-			mwl8k_cmd_update_stadb_del(hw, s->vif, s->sta.addr);
-		}
-
+		mwl8k_do_sta_notify(hw, s);
 		kfree(s);
 
 		spin_lock_bh(&priv->sta_notify_list_lock);
-- 
cgit v1.2.3


From a9e00b151ec2121b7ae09d84a2b5a68b6461e98a Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:31:30 +0100
Subject: mwl8k: correctly set the mac_type field for AP SET_MAC_ADDR

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index f0026f33232d..428575beb8d0 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2607,6 +2607,9 @@ struct mwl8k_cmd_set_mac_addr {
 	};
 } __attribute__((packed));
 
+#define MWL8K_MAC_TYPE_PRIMARY_CLIENT	0
+#define MWL8K_MAC_TYPE_PRIMARY_AP	2
+
 static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
 {
 	struct mwl8k_priv *priv = hw->priv;
@@ -2620,7 +2623,7 @@ static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	if (priv->ap_fw) {
-		cmd->mbss.mac_type = 0;
+		cmd->mbss.mac_type = cpu_to_le16(MWL8K_MAC_TYPE_PRIMARY_AP);
 		memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
 	} else {
 		memcpy(cmd->mac_addr, mac, ETH_ALEN);
-- 
cgit v1.2.3


From b64fe619e371fc17d8d686d6d44aef1b41317880 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:31:39 +0100
Subject: mwl8k: basic AP interface support

Add support for creating AP interfaces, and enabling beaconing.
This allows running a basic AP (11b/g mode only for now).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 171 +++++++++++++++++++++++++++++++++++++++----
 1 file changed, 158 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 428575beb8d0..759c94fb8e77 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -266,6 +266,7 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 #define MWL8K_CMD_RADIO_CONTROL		0x001c
 #define MWL8K_CMD_RF_TX_POWER		0x001e
 #define MWL8K_CMD_RF_ANTENNA		0x0020
+#define MWL8K_CMD_SET_BEACON		0x0100
 #define MWL8K_CMD_SET_PRE_SCAN		0x0107
 #define MWL8K_CMD_SET_POST_SCAN		0x0108
 #define MWL8K_CMD_SET_RF_CHANNEL	0x010a
@@ -281,6 +282,7 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 #define MWL8K_CMD_ENABLE_SNIFFER	0x0150
 #define MWL8K_CMD_SET_MAC_ADDR		0x0202
 #define MWL8K_CMD_SET_RATEADAPT_MODE	0x0203
+#define MWL8K_CMD_BSS_START		0x1100
 #define MWL8K_CMD_SET_NEW_STN		0x1111
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 
@@ -299,6 +301,7 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
 		MWL8K_CMDNAME(RADIO_CONTROL);
 		MWL8K_CMDNAME(RF_TX_POWER);
 		MWL8K_CMDNAME(RF_ANTENNA);
+		MWL8K_CMDNAME(SET_BEACON);
 		MWL8K_CMDNAME(SET_PRE_SCAN);
 		MWL8K_CMDNAME(SET_POST_SCAN);
 		MWL8K_CMDNAME(SET_RF_CHANNEL);
@@ -314,6 +317,7 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
 		MWL8K_CMDNAME(ENABLE_SNIFFER);
 		MWL8K_CMDNAME(SET_MAC_ADDR);
 		MWL8K_CMDNAME(SET_RATEADAPT_MODE);
+		MWL8K_CMDNAME(BSS_START);
 		MWL8K_CMDNAME(SET_NEW_STN);
 		MWL8K_CMDNAME(UPDATE_STADB);
 	default:
@@ -1769,7 +1773,9 @@ struct mwl8k_cmd_set_hw_spec {
 	__le32 total_rxd;
 } __attribute__((packed));
 
-#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT	0x00000080
+#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT		0x00000080
+#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP	0x00000020
+#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON		0x00000010
 
 static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw)
 {
@@ -1790,7 +1796,9 @@ static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw)
 	cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma);
-	cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT);
+	cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT |
+				 MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP |
+				 MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON);
 	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
 	cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
 
@@ -2027,6 +2035,35 @@ mwl8k_cmd_rf_antenna(struct ieee80211_hw *hw, int antenna, int mask)
 	return rc;
 }
 
+/*
+ * CMD_SET_BEACON.
+ */
+struct mwl8k_cmd_set_beacon {
+	struct mwl8k_cmd_pkt header;
+	__le16 beacon_len;
+	__u8 beacon[0];
+};
+
+static int mwl8k_cmd_set_beacon(struct ieee80211_hw *hw, u8 *beacon, int len)
+{
+	struct mwl8k_cmd_set_beacon *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd) + len, GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_BEACON);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd) + len);
+	cmd->beacon_len = cpu_to_le16(len);
+	memcpy(cmd->beacon, beacon, len);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
 /*
  * CMD_SET_PRE_SCAN.
  */
@@ -2664,6 +2701,33 @@ static int mwl8k_cmd_set_rateadapt_mode(struct ieee80211_hw *hw, __u16 mode)
 	return rc;
 }
 
+/*
+ * CMD_BSS_START.
+ */
+struct mwl8k_cmd_bss_start {
+	struct mwl8k_cmd_pkt header;
+	__le32 enable;
+} __attribute__((packed));
+
+static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw, int enable)
+{
+	struct mwl8k_cmd_bss_start *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_BSS_START);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->enable = cpu_to_le32(enable);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
 /*
  * CMD_SET_NEW_STN.
  */
@@ -2727,6 +2791,26 @@ static int mwl8k_cmd_set_new_stn_add(struct ieee80211_hw *hw,
 	return rc;
 }
 
+static int mwl8k_cmd_set_new_stn_add_self(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif)
+{
+	struct mwl8k_cmd_set_new_stn *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_NEW_STN);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	memcpy(cmd->mac_addr, vif->addr, ETH_ALEN);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
 static int mwl8k_cmd_set_new_stn_del(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif, u8 *addr)
 {
@@ -3015,16 +3099,10 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	if (priv->vif != NULL)
 		return -EBUSY;
 
-	/*
-	 * We only support managed interfaces for now.
-	 */
-	if (vif->type != NL80211_IFTYPE_STATION)
-		return -EINVAL;
-
 	/*
 	 * Reject interface creation if sniffer mode is active, as
 	 * STA operation is mutually exclusive with hardware sniffer
-	 * mode.
+	 * mode.  (Sniffer mode is only used on STA firmware.)
 	 */
 	if (priv->sniffer_enabled) {
 		printk(KERN_INFO "%s: unable to create STA "
@@ -3036,6 +3114,9 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	/* Set the mac address.  */
 	mwl8k_cmd_set_mac_addr(hw, vif->addr);
 
+	if (priv->ap_fw)
+		mwl8k_cmd_set_new_stn_add_self(hw, vif);
+
 	/* Clean out driver private area */
 	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
@@ -3054,6 +3135,9 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 {
 	struct mwl8k_priv *priv = hw->priv;
 
+	if (priv->ap_fw)
+		mwl8k_cmd_set_new_stn_del(hw, vif, vif->addr);
+
 	mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
 
 	priv->vif = NULL;
@@ -3105,10 +3189,9 @@ out:
 	return rc;
 }
 
-static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
-				   struct ieee80211_vif *vif,
-				   struct ieee80211_bss_conf *info,
-				   u32 changed)
+static void
+mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			   struct ieee80211_bss_conf *info, u32 changed)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	u32 ap_legacy_rates;
@@ -3188,6 +3271,66 @@ out:
 	mwl8k_fw_unlock(hw);
 }
 
+static void
+mwl8k_bss_info_changed_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			  struct ieee80211_bss_conf *info, u32 changed)
+{
+	int rc;
+
+	if (mwl8k_fw_lock(hw))
+		return;
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		rc = mwl8k_set_radio_preamble(hw,
+				vif->bss_conf.use_short_preamble);
+		if (rc)
+			goto out;
+	}
+
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		int idx;
+		int rate;
+
+		/*
+		 * Use lowest supported basic rate for multicasts
+		 * and management frames (such as probe responses --
+		 * beacons will always go out at 1 Mb/s).
+		 */
+		idx = ffs(vif->bss_conf.basic_rates);
+		rate = idx ? mwl8k_rates[idx - 1].hw_value : 2;
+
+		mwl8k_cmd_use_fixed_rate_ap(hw, rate, rate);
+	}
+
+	if (changed & (BSS_CHANGED_BEACON_INT | BSS_CHANGED_BEACON)) {
+		struct sk_buff *skb;
+
+		skb = ieee80211_beacon_get(hw, vif);
+		if (skb != NULL) {
+			mwl8k_cmd_set_beacon(hw, skb->data, skb->len);
+			kfree_skb(skb);
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		mwl8k_cmd_bss_start(hw, info->enable_beacon);
+
+out:
+	mwl8k_fw_unlock(hw);
+}
+
+static void
+mwl8k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       struct ieee80211_bss_conf *info, u32 changed)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	if (!priv->ap_fw)
+		mwl8k_bss_info_changed_sta(hw, vif, info, changed);
+	else
+		mwl8k_bss_info_changed_ap(hw, vif, info, changed);
+}
+
 static u64 mwl8k_prepare_multicast(struct ieee80211_hw *hw,
 				   int mc_count, struct dev_addr_list *mclist)
 {
@@ -3766,6 +3909,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		rc = mwl8k_cmd_get_hw_spec_ap(hw);
 		if (!rc)
 			rc = mwl8k_cmd_set_hw_spec(hw);
+
+		hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP);
 	} else {
 		rc = mwl8k_cmd_get_hw_spec_sta(hw);
 
-- 
cgit v1.2.3


From efb7c49a68cf206f35793d7799608e1d69a209f9 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:31:47 +0100
Subject: mwl8k: allow limiting the amount of transmit reclaim done

Add a limit argument to mwl8k_txq_reclaim(), to allow limiting the
number of packets that it will reclaim, and make it return the number
of packets that it reclaimed.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 759c94fb8e77..6598efcda5cc 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1249,13 +1249,15 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 		     MWL8K_TXD_STATUS_OK_RETRY |		\
 		     MWL8K_TXD_STATUS_OK_MORE_RETRY))
 
-static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
+static int
+mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int limit, int force)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_tx_queue *txq = priv->txq + index;
-	int wake = 0;
+	int processed;
 
-	while (txq->stats.len > 0) {
+	processed = 0;
+	while (txq->stats.len > 0 && limit--) {
 		int tx;
 		struct mwl8k_tx_desc *tx_desc;
 		unsigned long addr;
@@ -1302,11 +1304,13 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
 
 		ieee80211_tx_status_irqsafe(hw, skb);
 
-		wake = 1;
+		processed++;
 	}
 
-	if (wake && priv->radio_on && !mutex_is_locked(&priv->fw_mutex))
+	if (processed && priv->radio_on && !mutex_is_locked(&priv->fw_mutex))
 		ieee80211_wake_queue(hw, index);
+
+	return processed;
 }
 
 /* must be called only when the card's transmit is completely halted */
@@ -1315,7 +1319,7 @@ static void mwl8k_txq_deinit(struct ieee80211_hw *hw, int index)
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_tx_queue *txq = priv->txq + index;
 
-	mwl8k_txq_reclaim(hw, index, 1);
+	mwl8k_txq_reclaim(hw, index, INT_MAX, 1);
 
 	kfree(txq->skb);
 	txq->skb = NULL;
@@ -3084,7 +3088,7 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 
 	/* Return all skbs to mac80211 */
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
-		mwl8k_txq_reclaim(hw, i, 1);
+		mwl8k_txq_reclaim(hw, i, INT_MAX, 1);
 }
 
 static int mwl8k_add_interface(struct ieee80211_hw *hw,
@@ -3647,7 +3651,7 @@ static void mwl8k_tx_reclaim_handler(unsigned long data)
 
 	spin_lock_bh(&priv->tx_lock);
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
-		mwl8k_txq_reclaim(hw, i, 0);
+		mwl8k_txq_reclaim(hw, i, INT_MAX, 0);
 
 	if (priv->tx_wait != NULL && !priv->pending_tx_pkts) {
 		complete(priv->tx_wait);
@@ -4021,7 +4025,7 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 
 	/* Return all skbs to mac80211 */
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
-		mwl8k_txq_reclaim(hw, i, 1);
+		mwl8k_txq_reclaim(hw, i, INT_MAX, 1);
 
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_deinit(hw, i);
-- 
cgit v1.2.3


From 1e9f9de3b17db3aa358f39d6932662324178350d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:32:01 +0100
Subject: mwl8k: keep TX_DONE interrupt masked while transmit reclaim is
 running

By making use of the CLEAR_SEL feature of the mwl8k host interface
interrupt controller, we can keep the TX_DONE interrupt source masked
while the transmit reclaim tasklet is running (NAPI style) without
having to touch the interrupt controller's interrupt mask register
when entering or exiting polling mode, and without having to do any
more register reads/writes than we do now.

When CLEAR_SEL is enabled on the TX_DONE interrupt source, reading
the interrupt status register will clear the TX_DONE status bit if
it was set, allowing it to be set again if a new TX_DONE event arrives
while we are running the TX reclaim tasklet, but such a new event will
then not trigger another PCI interrupt until a zero is written to the
TX_DONE interrupt status register bit.

I.e., if we write a zero to the TX_DONE interrupt source bit in the
interrupt status register when the TX reclaim tasklet thinks it's
done, a PCI interrupt will be triggered if a new TX_DONE event arrived
from the hardware between us deciding that there is no more work to do
and re-enabling the TX_DONE interrupt source, thereby avoiding the
classic NAPI poll mode exit race that would otherwise occur.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 77 ++++++++++++++++++++++++++------------------
 1 file changed, 46 insertions(+), 31 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 6598efcda5cc..3f55aa0c8db3 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -202,8 +202,8 @@ struct mwl8k_priv {
 	 */
 	struct work_struct finalize_join_worker;
 
-	/* Tasklet to reclaim TX descriptors and buffers after tx */
-	struct tasklet_struct tx_reclaim_task;
+	/* Tasklet to perform TX reclaim.  */
+	struct tasklet_struct poll_tx_task;
 };
 
 /* Per interface specific private data */
@@ -2963,13 +2963,16 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id)
 	u32 status;
 
 	status = ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
-	iowrite32(~status, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
-
 	if (!status)
 		return IRQ_NONE;
 
-	if (status & MWL8K_A2H_INT_TX_DONE)
-		tasklet_schedule(&priv->tx_reclaim_task);
+	if (status & MWL8K_A2H_INT_TX_DONE) {
+		status &= ~MWL8K_A2H_INT_TX_DONE;
+		tasklet_schedule(&priv->poll_tx_task);
+	}
+
+	if (status)
+		iowrite32(~status, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
 
 	if (status & MWL8K_A2H_INT_RX_READY) {
 		while (rxq_process(hw, 0, 1))
@@ -2990,6 +2993,35 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void mwl8k_tx_poll(unsigned long data)
+{
+	struct ieee80211_hw *hw = (struct ieee80211_hw *)data;
+	struct mwl8k_priv *priv = hw->priv;
+	int limit;
+	int i;
+
+	limit = 32;
+
+	spin_lock_bh(&priv->tx_lock);
+
+	for (i = 0; i < MWL8K_TX_QUEUES; i++)
+		limit -= mwl8k_txq_reclaim(hw, i, limit, 0);
+
+	if (!priv->pending_tx_pkts && priv->tx_wait != NULL) {
+		complete(priv->tx_wait);
+		priv->tx_wait = NULL;
+	}
+
+	spin_unlock_bh(&priv->tx_lock);
+
+	if (limit) {
+		writel(~MWL8K_A2H_INT_TX_DONE,
+		       priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
+	} else {
+		tasklet_schedule(&priv->poll_tx_task);
+	}
+}
+
 
 /*
  * Core driver operations.
@@ -3026,7 +3058,7 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 	}
 
 	/* Enable tx reclaim tasklet */
-	tasklet_enable(&priv->tx_reclaim_task);
+	tasklet_enable(&priv->poll_tx_task);
 
 	/* Enable interrupts */
 	iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
@@ -3059,7 +3091,7 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 	if (rc) {
 		iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
 		free_irq(priv->pdev->irq, hw);
-		tasklet_disable(&priv->tx_reclaim_task);
+		tasklet_disable(&priv->poll_tx_task);
 	}
 
 	return rc;
@@ -3084,7 +3116,7 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 		dev_kfree_skb(priv->beacon_skb);
 
 	/* Stop tx reclaim tasklet */
-	tasklet_disable(&priv->tx_reclaim_task);
+	tasklet_disable(&priv->poll_tx_task);
 
 	/* Return all skbs to mac80211 */
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
@@ -3643,23 +3675,6 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.ampdu_action		= mwl8k_ampdu_action,
 };
 
-static void mwl8k_tx_reclaim_handler(unsigned long data)
-{
-	int i;
-	struct ieee80211_hw *hw = (struct ieee80211_hw *) data;
-	struct mwl8k_priv *priv = hw->priv;
-
-	spin_lock_bh(&priv->tx_lock);
-	for (i = 0; i < MWL8K_TX_QUEUES; i++)
-		mwl8k_txq_reclaim(hw, i, INT_MAX, 0);
-
-	if (priv->tx_wait != NULL && !priv->pending_tx_pkts) {
-		complete(priv->tx_wait);
-		priv->tx_wait = NULL;
-	}
-	spin_unlock_bh(&priv->tx_lock);
-}
-
 static void mwl8k_finalize_join_worker(struct work_struct *work)
 {
 	struct mwl8k_priv *priv =
@@ -3859,9 +3874,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
 
 	/* TX reclaim tasklet */
-	tasklet_init(&priv->tx_reclaim_task,
-			mwl8k_tx_reclaim_handler, (unsigned long)hw);
-	tasklet_disable(&priv->tx_reclaim_task);
+	tasklet_init(&priv->poll_tx_task, mwl8k_tx_poll, (unsigned long)hw);
+	tasklet_disable(&priv->poll_tx_task);
 
 	/* Power management cookie */
 	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
@@ -3890,7 +3904,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
-	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL);
+	iowrite32(MWL8K_A2H_INT_TX_DONE,
+		  priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL);
 	iowrite32(0xffffffff, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
 
 	rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
@@ -4018,7 +4033,7 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 	ieee80211_unregister_hw(hw);
 
 	/* Remove tx reclaim tasklet */
-	tasklet_kill(&priv->tx_reclaim_task);
+	tasklet_kill(&priv->poll_tx_task);
 
 	/* Stop hardware */
 	mwl8k_hw_reset(priv);
-- 
cgit v1.2.3


From 67e2eb27958cae758ccbc86443c360ec285acc3e Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 8 Jan 2010 18:32:18 +0100
Subject: mwl8k: move receive processing to tasklet

Like how TX reclaim is done in a tasklet, move receive processing
to tasklet context as well.  This can have nice benefits for CPU
utilisation and throughput, especially at 3-stream rates.

(Use the same CLEAR_SEL trick as the TX reclaim tasklet does, to
avoid having to touch the interrupt mask registers.)

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 47 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 37 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 3f55aa0c8db3..13b0e32b051a 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -204,6 +204,9 @@ struct mwl8k_priv {
 
 	/* Tasklet to perform TX reclaim.  */
 	struct tasklet_struct poll_tx_task;
+
+	/* Tasklet to perform RX.  */
+	struct tasklet_struct poll_rx_task;
 };
 
 /* Per interface specific private data */
@@ -2971,14 +2974,14 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id)
 		tasklet_schedule(&priv->poll_tx_task);
 	}
 
-	if (status)
-		iowrite32(~status, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
-
 	if (status & MWL8K_A2H_INT_RX_READY) {
-		while (rxq_process(hw, 0, 1))
-			rxq_refill(hw, 0, 1);
+		status &= ~MWL8K_A2H_INT_RX_READY;
+		tasklet_schedule(&priv->poll_rx_task);
 	}
 
+	if (status)
+		iowrite32(~status, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
+
 	if (status & MWL8K_A2H_INT_OPC_DONE) {
 		if (priv->hostcmd_wait != NULL)
 			complete(priv->hostcmd_wait);
@@ -3022,6 +3025,24 @@ static void mwl8k_tx_poll(unsigned long data)
 	}
 }
 
+static void mwl8k_rx_poll(unsigned long data)
+{
+	struct ieee80211_hw *hw = (struct ieee80211_hw *)data;
+	struct mwl8k_priv *priv = hw->priv;
+	int limit;
+
+	limit = 32;
+	limit -= rxq_process(hw, 0, limit);
+	limit -= rxq_refill(hw, 0, limit);
+
+	if (limit) {
+		writel(~MWL8K_A2H_INT_RX_READY,
+		       priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
+	} else {
+		tasklet_schedule(&priv->poll_rx_task);
+	}
+}
+
 
 /*
  * Core driver operations.
@@ -3057,8 +3078,9 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 		return -EIO;
 	}
 
-	/* Enable tx reclaim tasklet */
+	/* Enable TX reclaim and RX tasklets.  */
 	tasklet_enable(&priv->poll_tx_task);
+	tasklet_enable(&priv->poll_rx_task);
 
 	/* Enable interrupts */
 	iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
@@ -3092,6 +3114,7 @@ static int mwl8k_start(struct ieee80211_hw *hw)
 		iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
 		free_irq(priv->pdev->irq, hw);
 		tasklet_disable(&priv->poll_tx_task);
+		tasklet_disable(&priv->poll_rx_task);
 	}
 
 	return rc;
@@ -3115,8 +3138,9 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 	if (priv->beacon_skb != NULL)
 		dev_kfree_skb(priv->beacon_skb);
 
-	/* Stop tx reclaim tasklet */
+	/* Stop TX reclaim and RX tasklets.  */
 	tasklet_disable(&priv->poll_tx_task);
+	tasklet_disable(&priv->poll_rx_task);
 
 	/* Return all skbs to mac80211 */
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
@@ -3873,9 +3897,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	/* Finalize join worker */
 	INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
 
-	/* TX reclaim tasklet */
+	/* TX reclaim and RX tasklets.  */
 	tasklet_init(&priv->poll_tx_task, mwl8k_tx_poll, (unsigned long)hw);
 	tasklet_disable(&priv->poll_tx_task);
+	tasklet_init(&priv->poll_rx_task, mwl8k_rx_poll, (unsigned long)hw);
+	tasklet_disable(&priv->poll_rx_task);
 
 	/* Power management cookie */
 	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
@@ -3904,7 +3930,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
-	iowrite32(MWL8K_A2H_INT_TX_DONE,
+	iowrite32(MWL8K_A2H_INT_TX_DONE | MWL8K_A2H_INT_RX_READY,
 		  priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL);
 	iowrite32(0xffffffff, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
 
@@ -4032,8 +4058,9 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 
 	ieee80211_unregister_hw(hw);
 
-	/* Remove tx reclaim tasklet */
+	/* Remove TX reclaim and RX tasklets.  */
 	tasklet_kill(&priv->poll_tx_task);
+	tasklet_kill(&priv->poll_rx_task);
 
 	/* Stop hardware */
 	mwl8k_hw_reset(priv);
-- 
cgit v1.2.3


From f05279711b9a59ac10e0b6e5f3a7447886c72704 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 8 Jan 2010 10:04:41 -0800
Subject: iwlwifi: add IEEE80211_AMPDU_TX_OPERATIONAL

mac80211 do not check the return code now, what if mac80211 does start
using the return code? IEEE80211_AMPDU_TX_OPERATIONAL is a valid action,
just iwlwifi driver do not need to take any action for it; so instead of
return "-EINVAL", it is a good program practice to return "-EOPNOTSUPP"
to make sure mac80211 will not get wrong impression.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 771b03c1c7c5..c78063312ea9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2955,6 +2955,9 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			return 0;
 		else
 			return ret;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		/* do nothing */
+		return -EOPNOTSUPP;
 	default:
 		IWL_DEBUG_HT(priv, "unknown\n");
 		return -EINVAL;
-- 
cgit v1.2.3


From f0118a4575d45ce3074c830660de938bc6e17bda Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 8 Jan 2010 10:04:42 -0800
Subject: iwlwifi: ucode statistics data structure update

Update data structure to match latest statistics report from uCode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h | 6 +++---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  | 3 +++
 2 files changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 28f3800c560e..6bfc63f54b5e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2984,7 +2984,7 @@ struct statistics_rx_ht_phy {
 	__le32 agg_crc32_good;
 	__le32 agg_mpdu_cnt;
 	__le32 agg_cnt;
-	__le32 reserved2;
+	__le32 unsupport_mcs;
 } __attribute__ ((packed));
 
 #define INTERFERENCE_DATA_AVAILABLE      cpu_to_le32(1)
@@ -3087,8 +3087,8 @@ struct statistics_div {
 } __attribute__ ((packed));
 
 struct statistics_general {
-	__le32 temperature;
-	__le32 temperature_m;
+	__le32 temperature;   /* radio temperature */
+	__le32 temperature_m; /* for 5000 and up, this is radio voltage */
 	struct statistics_dbg dbg;
 	__le32 sleep_time;
 	__le32 slots_out;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index ee5aed12a4b1..510bad918f20 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1387,6 +1387,9 @@ static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
 			 accum_ht->agg_mpdu_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt:\t\t%u\t\t\t%u\n",
 			 le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "unsupport_mcs:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->unsupport_mcs),
+			 accum_ht->unsupport_mcs);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
-- 
cgit v1.2.3


From c15867f15f98e5ecbdbee5993db7f6f4b7100481 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 8 Jan 2010 10:04:43 -0800
Subject: iwlwifi: remove obsoleted host command

"RADAR_NOTIFICATION" host command is not used and not supported by uCode,
remove it from driver code.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h | 1 -
 drivers/net/wireless/iwlwifi/iwl-hcmd.c     | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 6bfc63f54b5e..3320cce3d57b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -120,7 +120,6 @@ enum {
 	CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
 
 	/* 802.11h related */
-	RADAR_NOTIFICATION = 0x70,	/* not used */
 	REPLY_QUIET_CMD = 0x71,		/* not used */
 	REPLY_CHANNEL_SWITCH = 0x72,
 	CHANNEL_SWITCH_NOTIFICATION = 0x73,
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 30e9ea6d54ec..87d684efe110 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -58,7 +58,6 @@ const char *get_cmd_string(u8 cmd)
 		IWL_CMD(COEX_PRIORITY_TABLE_CMD);
 		IWL_CMD(COEX_MEDIUM_NOTIFICATION);
 		IWL_CMD(COEX_EVENT_CMD);
-		IWL_CMD(RADAR_NOTIFICATION);
 		IWL_CMD(REPLY_QUIET_CMD);
 		IWL_CMD(REPLY_CHANNEL_SWITCH);
 		IWL_CMD(CHANNEL_SWITCH_NOTIFICATION);
-- 
cgit v1.2.3


From 8ce1ef4a914aef8b9b90a2a2c670494168a2cca9 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 8 Jan 2010 10:04:44 -0800
Subject: iwlwifi: fix bug in tx byte count table

When setting invalid byte count in txq byte count table, read pointer
should be used instead of write pointer.

Reported-by: Guo, Chaohong <chaohong.guo@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-5000.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index ec6b27689fa8..c3f8ec0a38b1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -781,7 +781,7 @@ void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 
 	scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
 
-	if (txq->q.write_ptr < TFD_QUEUE_SIZE_BC_DUP)
+	if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
 		scd_bc_tbl[txq_id].
 			tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
 }
@@ -800,12 +800,12 @@ void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
 	if (txq_id != IWL_CMD_QUEUE_NUM)
 		sta_id = txq->cmd[read_ptr]->cmd.tx.sta_id;
 
-	bc_ent =  cpu_to_le16(1 | (sta_id << 12));
+	bc_ent = cpu_to_le16(1 | (sta_id << 12));
 	scd_bc_tbl[txq_id].tfd_offset[read_ptr] = bc_ent;
 
-	if (txq->q.write_ptr < TFD_QUEUE_SIZE_BC_DUP)
+	if (read_ptr < TFD_QUEUE_SIZE_BC_DUP)
 		scd_bc_tbl[txq_id].
-			tfd_offset[TFD_QUEUE_SIZE_MAX + read_ptr] =  bc_ent;
+			tfd_offset[TFD_QUEUE_SIZE_MAX + read_ptr] = bc_ent;
 }
 
 static int iwl5000_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
-- 
cgit v1.2.3


From 28f63a4bb744ea81030219aba2337fddb10b380b Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 8 Jan 2010 16:14:10 -0700
Subject: iwl-debugfs.c: remove unnecessary casts of void *

void pointers do not need to be cast to other pointer types.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 46 +++++++++++++++---------------
 1 file changed, 23 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 510bad918f20..4a2ac9311ba8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -125,7 +125,7 @@ static ssize_t iwl_dbgfs_tx_statistics_read(struct file *file,
 						char __user *user_buf,
 						size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char *buf;
 	int pos = 0;
 
@@ -184,7 +184,7 @@ static ssize_t iwl_dbgfs_rx_statistics_read(struct file *file,
 						char __user *user_buf,
 						size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char *buf;
 	int pos = 0;
 	int cnt;
@@ -232,7 +232,7 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	ssize_t ret;
 	int i;
 	int pos = 0;
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	size_t bufsz;
 
 	/* default is to dump the entire data segment */
@@ -306,7 +306,7 @@ static ssize_t iwl_dbgfs_sram_write(struct file *file,
 static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf,
 					size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	struct iwl_station_entry *station;
 	int max_sta = priv->hw_params.max_stations;
 	char *buf;
@@ -376,7 +376,7 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 				       loff_t *ppos)
 {
 	ssize_t ret;
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0, ofs = 0, buf_size = 0;
 	const u8 *ptr;
 	char *buf;
@@ -464,7 +464,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file,
 static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
 				       size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	struct ieee80211_channel *channels = NULL;
 	const struct ieee80211_supported_band *supp_band = NULL;
 	int pos = 0, i, bufsz = PAGE_SIZE;
@@ -537,7 +537,7 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 						char __user *user_buf,
 						size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char buf[512];
 	int pos = 0;
 	const size_t bufsz = sizeof(buf);
@@ -585,7 +585,7 @@ static ssize_t iwl_dbgfs_interrupt_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	int cnt = 0;
 	char *buf;
@@ -672,7 +672,7 @@ static ssize_t iwl_dbgfs_interrupt_write(struct file *file,
 static ssize_t iwl_dbgfs_qos_read(struct file *file, char __user *user_buf,
 				       size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0, i;
 	char buf[256];
 	const size_t bufsz = sizeof(buf);
@@ -695,7 +695,7 @@ static ssize_t iwl_dbgfs_qos_read(struct file *file, char __user *user_buf,
 static ssize_t iwl_dbgfs_led_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char buf[256];
 	const size_t bufsz = sizeof(buf);
@@ -721,7 +721,7 @@ static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file,
 				char __user *user_buf,
 				size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
 	struct iwl_tt_restriction *restriction;
 	char buf[100];
@@ -781,7 +781,7 @@ static ssize_t iwl_dbgfs_disable_ht40_read(struct file *file,
 					 char __user *user_buf,
 					 size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char buf[100];
 	int pos = 0;
 	const size_t bufsz = sizeof(buf);
@@ -838,7 +838,7 @@ static ssize_t iwl_dbgfs_sleep_level_override_read(struct file *file,
 						   char __user *user_buf,
 						   size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char buf[10];
 	int pos, value;
 	const size_t bufsz = sizeof(buf);
@@ -856,7 +856,7 @@ static ssize_t iwl_dbgfs_current_sleep_command_read(struct file *file,
 						    char __user *user_buf,
 						    size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char buf[200];
 	int pos = 0, i;
 	const size_t bufsz = sizeof(buf);
@@ -994,7 +994,7 @@ static ssize_t iwl_dbgfs_tx_queue_read(struct file *file,
 						char __user *user_buf,
 						size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	struct iwl_tx_queue *txq;
 	struct iwl_queue *q;
 	char *buf;
@@ -1040,7 +1040,7 @@ static ssize_t iwl_dbgfs_rx_queue_read(struct file *file,
 						char __user *user_buf,
 						size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	char buf[256];
 	int pos = 0;
@@ -1086,7 +1086,7 @@ static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
 	int bufsz = sizeof(struct statistics_rx_phy) * 20 +
@@ -1400,7 +1400,7 @@ static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
 	int bufsz = (sizeof(struct statistics_tx) * 24) + 250;
@@ -1542,7 +1542,7 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
 	int bufsz = sizeof(struct statistics_general) * 4 + 250;
@@ -1633,7 +1633,7 @@ static ssize_t iwl_dbgfs_sensitivity_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	int cnt = 0;
 	char *buf;
@@ -1714,7 +1714,7 @@ static ssize_t iwl_dbgfs_chain_noise_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	int cnt = 0;
 	char *buf;
@@ -1772,7 +1772,7 @@ static ssize_t iwl_dbgfs_tx_power_read(struct file *file,
 					char __user *user_buf,
 					size_t count, loff_t *ppos) {
 
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char buf[128];
 	int pos = 0;
 	ssize_t ret;
@@ -1823,7 +1823,7 @@ static ssize_t iwl_dbgfs_power_save_status_read(struct file *file,
 						    char __user *user_buf,
 						    size_t count, loff_t *ppos)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	struct iwl_priv *priv = file->private_data;
 	char buf[60];
 	int pos = 0;
 	const size_t bufsz = sizeof(buf);
-- 
cgit v1.2.3


From 8f8ff91652fcf62b9fced5387956b4b269fde634 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 12 Jan 2010 10:43:07 +0200
Subject: wl1251: create qos null data template

The qos null data template is needed for U-APSD.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index f17ce06b6c24..d469d3dcd054 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -563,6 +563,27 @@ static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
 	mutex_unlock(&wl->mutex);
 }
 
+static int wl1251_build_qos_null_data(struct wl1251 *wl)
+{
+	struct ieee80211_qos_hdr template;
+
+	memset(&template, 0, sizeof(template));
+
+	memcpy(template.addr1, wl->bssid, ETH_ALEN);
+	memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
+	memcpy(template.addr3, wl->bssid, ETH_ALEN);
+
+	template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+					     IEEE80211_STYPE_QOS_NULLFUNC |
+					     IEEE80211_FCTL_TODS);
+
+	/* FIXME: not sure what priority to use here */
+	template.qos_ctrl = cpu_to_le16(0);
+
+	return wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, &template,
+				       sizeof(template));
+}
+
 static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct wl1251 *wl = hw->priv;
@@ -948,6 +969,10 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 		if (ret < 0)
 			goto out_sleep;
 
+		ret = wl1251_build_qos_null_data(wl);
+		if (ret < 0)
+			goto out;
+
 		if (wl->bss_type != BSS_TYPE_IBSS) {
 			ret = wl1251_join(wl, wl->bss_type, wl->channel,
 					  wl->beacon_int, wl->dtim_period);
-- 
cgit v1.2.3


From 4ff6ffa107ba1c6ba9a1cc75a1f304eaa79e8bf4 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 12 Jan 2010 10:43:15 +0200
Subject: wl1251: add U-APSD support

wl1251 firmware supports U-APSD just with a simple queue configuration
change so enable it.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index d469d3dcd054..595f0f94d16e 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1143,6 +1143,7 @@ static struct ieee80211_channel wl1251_channels[] = {
 static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 			     const struct ieee80211_tx_queue_params *params)
 {
+	enum wl1251_acx_ps_scheme ps_scheme;
 	struct wl1251 *wl = hw->priv;
 	int ret;
 
@@ -1160,10 +1161,14 @@ static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	if (ret < 0)
 		goto out_sleep;
 
+	if (params->uapsd)
+		ps_scheme = WL1251_ACX_PS_SCHEME_UPSD_TRIGGER;
+	else
+		ps_scheme = WL1251_ACX_PS_SCHEME_LEGACY;
+
 	ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
 				 CHANNEL_TYPE_EDCF,
-				 wl1251_tx_get_queue(queue),
-				 WL1251_ACX_PS_SCHEME_LEGACY,
+				 wl1251_tx_get_queue(queue), ps_scheme,
 				 WL1251_ACX_ACK_POLICY_LEGACY);
 	if (ret < 0)
 		goto out_sleep;
@@ -1237,7 +1242,8 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		IEEE80211_HW_NOISE_DBM |
 		IEEE80211_HW_SUPPORTS_PS |
-		IEEE80211_HW_BEACON_FILTER;
+		IEEE80211_HW_BEACON_FILTER |
+		IEEE80211_HW_SUPPORTS_UAPSD;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	wl->hw->wiphy->max_scan_ssids = 1;
-- 
cgit v1.2.3


From c92d4edecf489dbcbb2e5dd3c513790e57e2ea0e Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:47:22 +0100
Subject: mwl8k: update MODULE_FIRMWARE tags

Add MODULE_FIRMWARE tags for the mwl8k firmware images that don't
have them yet, and move them to where the firmware image names are
declared.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 13b0e32b051a..01cababfefa8 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -394,9 +394,6 @@ static int mwl8k_request_firmware(struct mwl8k_priv *priv)
 	return 0;
 }
 
-MODULE_FIRMWARE("mwl8k/helper_8687.fw");
-MODULE_FIRMWARE("mwl8k/fmimage_8687.fw");
-
 struct mwl8k_cmd_pkt {
 	__le16	code;
 	__le16	length;
@@ -3737,6 +3734,13 @@ static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
 	},
 };
 
+MODULE_FIRMWARE("mwl8k/helper_8363.fw");
+MODULE_FIRMWARE("mwl8k/fmimage_8363.fw");
+MODULE_FIRMWARE("mwl8k/helper_8687.fw");
+MODULE_FIRMWARE("mwl8k/fmimage_8687.fw");
+MODULE_FIRMWARE("mwl8k/helper_8366.fw");
+MODULE_FIRMWARE("mwl8k/fmimage_8366.fw");
+
 static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
 	{ PCI_VDEVICE(MARVELL, 0x2a0c), .driver_data = MWL8363, },
 	{ PCI_VDEVICE(MARVELL, 0x2a24), .driver_data = MWL8363, },
-- 
cgit v1.2.3


From 9189c10087a738c764046fa27651d332594cd8e6 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:47:32 +0100
Subject: mwl8k: remove (mostly) write-only variable priv->current_channel

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 01cababfefa8..f2c4524888a8 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -156,8 +156,6 @@ struct mwl8k_priv {
 
 	struct ieee80211_vif *vif;
 
-	struct ieee80211_channel *current_channel;
-
 	/* power management status cookie from firmware */
 	u32 *cookie;
 	dma_addr_t cookie_dma;
@@ -3050,7 +3048,7 @@ static int mwl8k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	int index = skb_get_queue_mapping(skb);
 	int rc;
 
-	if (priv->current_channel == NULL) {
+	if (!priv->radio_on) {
 		printk(KERN_DEBUG "%s: dropped TX frame since radio "
 		       "disabled\n", wiphy_name(hw->wiphy));
 		dev_kfree_skb(skb);
@@ -3182,7 +3180,6 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	mwl8k_vif->seqno = 0;
 
 	priv->vif = vif;
-	priv->current_channel = NULL;
 
 	return 0;
 }
@@ -3208,7 +3205,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 
 	if (conf->flags & IEEE80211_CONF_IDLE) {
 		mwl8k_cmd_radio_disable(hw);
-		priv->current_channel = NULL;
 		return 0;
 	}
 
@@ -3224,8 +3220,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	if (rc)
 		goto out;
 
-	priv->current_channel = conf->channel;
-
 	if (conf->power_level > 18)
 		conf->power_level = 18;
 	rc = mwl8k_cmd_rf_tx_power(hw, conf->power_level);
-- 
cgit v1.2.3


From c97470dd253831e880c72ea5d022ed7f3aee45c3 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:47:37 +0100
Subject: mwl8k: don't call SET_AID if we're not associated

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index f2c4524888a8..67ee3da33264 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3261,9 +3261,9 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	/*
 	 * Get the AP's legacy and MCS rates.
 	 */
-	ap_legacy_rates = 0;
 	if (vif->bss_conf.assoc) {
 		struct ieee80211_sta *ap;
+
 		rcu_read_lock();
 
 		ap = ieee80211_find_sta(vif, vif->bss_conf.bssid);
@@ -3301,8 +3301,9 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			goto out;
 	}
 
-	if (((changed & BSS_CHANGED_ASSOC) && vif->bss_conf.assoc) ||
-	    (changed & (BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_HT))) {
+	if (vif->bss_conf.assoc &&
+	    (changed & (BSS_CHANGED_ASSOC | BSS_CHANGED_ERP_CTS_PROT |
+			BSS_CHANGED_HT))) {
 		rc = mwl8k_cmd_set_aid(hw, vif, ap_legacy_rates);
 		if (rc)
 			goto out;
-- 
cgit v1.2.3


From 657232b625890f202867ede0ed67ecf15827ff80 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:47:47 +0100
Subject: mwl8k: simplify sequence number assignment

By storing the sequence counter in << 4 format, like other drivers do.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 67ee3da33264..7d165befb0d7 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1355,11 +1355,9 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 	mwl8k_vif = MWL8K_VIF(tx_info->control.vif);
 
 	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		u16 seqno = mwl8k_vif->seqno;
-
 		wh->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		wh->seq_ctrl |= cpu_to_le16(seqno << 4);
-		mwl8k_vif->seqno = seqno++ % 4096;
+		wh->seq_ctrl |= cpu_to_le16(mwl8k_vif->seqno);
+		mwl8k_vif->seqno += 0x10;
 	}
 
 	/* Setup firmware control bit fields for each frame type.  */
-- 
cgit v1.2.3


From ca66527c60385dcec878ebd90749d1fdc43bc870 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:47:53 +0100
Subject: mwl8k: add another 88w8366 PCI ID

0x2a43 is a single-band (2.4GHz only) 88w8366 mini-PCIe card.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 7d165befb0d7..76da583df321 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3740,6 +3740,7 @@ static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
 	{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, },
 	{ PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, },
 	{ PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, },
+	{ PCI_VDEVICE(MARVELL, 0x2a43), .driver_data = MWL8366, },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci, mwl8k_pci_id_table);
-- 
cgit v1.2.3


From 777ad375d5960e0d2a945a34032b182eb2952d45 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:48:04 +0100
Subject: mwl8k: rename 2.4 GHz band/channels/rates related variables from FOO
 to FOO_24

To prepare for adding 5 GHz band/channels/rates.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 76 +++++++++++++++++++++-----------------------
 1 file changed, 37 insertions(+), 39 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 76da583df321..37cbfbf21567 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -141,6 +141,9 @@ struct mwl8k_priv {
 	/* hardware/firmware parameters */
 	bool ap_fw;
 	struct rxd_ops *rxd_ops;
+	struct ieee80211_supported_band band_24;
+	struct ieee80211_channel channels_24[14];
+	struct ieee80211_rate rates_24[14];
 
 	/* firmware access */
 	struct mutex fw_mutex;
@@ -173,11 +176,6 @@ struct mwl8k_priv {
 	struct mwl8k_rx_queue rxq[MWL8K_RX_QUEUES];
 	struct mwl8k_tx_queue txq[MWL8K_TX_QUEUES];
 
-	/* PHY parameters */
-	struct ieee80211_supported_band band;
-	struct ieee80211_channel channels[14];
-	struct ieee80211_rate rates[14];
-
 	bool radio_on;
 	bool radio_short_preamble;
 	bool sniffer_enabled;
@@ -220,7 +218,7 @@ struct mwl8k_sta {
 };
 #define MWL8K_STA(_sta) ((struct mwl8k_sta *)&((_sta)->drv_priv))
 
-static const struct ieee80211_channel mwl8k_channels[] = {
+static const struct ieee80211_channel mwl8k_channels_24[] = {
 	{ .center_freq = 2412, .hw_value = 1, },
 	{ .center_freq = 2417, .hw_value = 2, },
 	{ .center_freq = 2422, .hw_value = 3, },
@@ -237,7 +235,7 @@ static const struct ieee80211_channel mwl8k_channels[] = {
 	{ .center_freq = 2484, .hw_value = 14, },
 };
 
-static const struct ieee80211_rate mwl8k_rates[] = {
+static const struct ieee80211_rate mwl8k_rates_24[] = {
 	{ .bitrate = 10, .hw_value = 2, },
 	{ .bitrate = 20, .hw_value = 4, },
 	{ .bitrate = 55, .hw_value = 11, },
@@ -731,8 +729,8 @@ mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status,
 	} else {
 		int i;
 
-		for (i = 0; i < ARRAY_SIZE(mwl8k_rates); i++) {
-			if (mwl8k_rates[i].hw_value == rxd->rate) {
+		for (i = 0; i < ARRAY_SIZE(mwl8k_rates_24); i++) {
+			if (mwl8k_rates_24[i].hw_value == rxd->rate) {
 				status->rate_idx = i;
 				break;
 			}
@@ -1597,48 +1595,48 @@ struct mwl8k_cmd_get_hw_spec_sta {
 static void mwl8k_set_ht_caps(struct ieee80211_hw *hw, u32 cap)
 {
 	struct mwl8k_priv *priv = hw->priv;
+	struct ieee80211_supported_band *band = &priv->band_24;
 	int rx_streams;
 	int tx_streams;
 
-	priv->band.ht_cap.ht_supported = 1;
+	band->ht_cap.ht_supported = 1;
 
 	if (cap & MWL8K_CAP_MAX_AMSDU)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 	if (cap & MWL8K_CAP_GREENFIELD)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_GRN_FLD;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_GRN_FLD;
 	if (cap & MWL8K_CAP_AMPDU) {
 		hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
-		priv->band.ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-		priv->band.ht_cap.ampdu_density =
-				IEEE80211_HT_MPDU_DENSITY_NONE;
+		band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+		band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE;
 	}
 	if (cap & MWL8K_CAP_RX_STBC)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_RX_STBC;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_RX_STBC;
 	if (cap & MWL8K_CAP_TX_STBC)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
 	if (cap & MWL8K_CAP_SHORTGI_40MHZ)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
 	if (cap & MWL8K_CAP_SHORTGI_20MHZ)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
 	if (cap & MWL8K_CAP_DELAY_BA)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_DELAY_BA;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_DELAY_BA;
 	if (cap & MWL8K_CAP_40MHZ)
-		priv->band.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+		band->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 
 	rx_streams = hweight32(cap & MWL8K_CAP_RX_ANTENNA_MASK);
 	tx_streams = hweight32(cap & MWL8K_CAP_TX_ANTENNA_MASK);
 
-	priv->band.ht_cap.mcs.rx_mask[0] = 0xff;
+	band->ht_cap.mcs.rx_mask[0] = 0xff;
 	if (rx_streams >= 2)
-		priv->band.ht_cap.mcs.rx_mask[1] = 0xff;
+		band->ht_cap.mcs.rx_mask[1] = 0xff;
 	if (rx_streams >= 3)
-		priv->band.ht_cap.mcs.rx_mask[2] = 0xff;
-	priv->band.ht_cap.mcs.rx_mask[4] = 0x01;
-	priv->band.ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+		band->ht_cap.mcs.rx_mask[2] = 0xff;
+	band->ht_cap.mcs.rx_mask[4] = 0x01;
+	band->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 
 	if (rx_streams != tx_streams) {
-		priv->band.ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
-		priv->band.ht_cap.mcs.tx_params |= (tx_streams - 1) <<
+		band->ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+		band->ht_cap.mcs.tx_params |= (tx_streams - 1) <<
 				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
 	}
 }
@@ -2192,7 +2190,7 @@ static void legacy_rate_mask_to_array(u8 *rates, u32 mask)
 
 	for (i = 0, j = 0; i < 14; i++) {
 		if (mask & (1 << i))
-			rates[j++] = mwl8k_rates[i].hw_value;
+			rates[j++] = mwl8k_rates_24[i].hw_value;
 	}
 }
 
@@ -3347,7 +3345,7 @@ mwl8k_bss_info_changed_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		 * beacons will always go out at 1 Mb/s).
 		 */
 		idx = ffs(vif->bss_conf.basic_rates);
-		rate = idx ? mwl8k_rates[idx - 1].hw_value : 2;
+		rate = idx ? mwl8k_rates_24[idx - 1].hw_value : 2;
 
 		mwl8k_cmd_use_fixed_rate_ap(hw, rate, rate);
 	}
@@ -3855,16 +3853,16 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	priv->pending_tx_pkts = 0;
 
 
-	memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels));
-	priv->band.band = IEEE80211_BAND_2GHZ;
-	priv->band.channels = priv->channels;
-	priv->band.n_channels = ARRAY_SIZE(mwl8k_channels);
-	priv->band.bitrates = priv->rates;
-	priv->band.n_bitrates = ARRAY_SIZE(mwl8k_rates);
-	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+	memcpy(priv->channels_24, mwl8k_channels_24, sizeof(mwl8k_channels_24));
+	priv->band_24.band = IEEE80211_BAND_2GHZ;
+	priv->band_24.channels = priv->channels_24;
+	priv->band_24.n_channels = ARRAY_SIZE(mwl8k_channels_24);
+	priv->band_24.bitrates = priv->rates_24;
+	priv->band_24.n_bitrates = ARRAY_SIZE(mwl8k_rates_24);
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band_24;
 
-	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(mwl8k_rates));
-	memcpy(priv->rates, mwl8k_rates, sizeof(mwl8k_rates));
+	BUILD_BUG_ON(sizeof(priv->rates_24) != sizeof(mwl8k_rates_24));
+	memcpy(priv->rates_24, mwl8k_rates_24, sizeof(mwl8k_rates_24));
 
 	/*
 	 * Extra headroom is the size of the required DMA header
-- 
cgit v1.2.3


From 1349ad2f06f86f41415cf7ffa9e068fd4f89be87 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:48:17 +0100
Subject: mwl8k: move responsibility for initialising wiphy bands to
 GET_HW_SPEC

So that we can make 2.4 GHz and 5 GHz band registration conditional
on the capability bitmask returned by the firmware.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 37cbfbf21567..a17111f40266 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1557,6 +1557,28 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 	return rc;
 }
 
+/*
+ * Setup code shared between STA and AP firmware images.
+ */
+static void mwl8k_setup_2ghz_band(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	BUILD_BUG_ON(sizeof(priv->channels_24) != sizeof(mwl8k_channels_24));
+	memcpy(priv->channels_24, mwl8k_channels_24, sizeof(mwl8k_channels_24));
+
+	BUILD_BUG_ON(sizeof(priv->rates_24) != sizeof(mwl8k_rates_24));
+	memcpy(priv->rates_24, mwl8k_rates_24, sizeof(mwl8k_rates_24));
+
+	priv->band_24.band = IEEE80211_BAND_2GHZ;
+	priv->band_24.channels = priv->channels_24;
+	priv->band_24.n_channels = ARRAY_SIZE(mwl8k_channels_24);
+	priv->band_24.bitrates = priv->rates_24;
+	priv->band_24.n_bitrates = ARRAY_SIZE(mwl8k_rates_24);
+
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band_24;
+}
+
 /*
  * CMD_GET_HW_SPEC (STA version).
  */
@@ -1671,6 +1693,7 @@ static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
+		mwl8k_setup_2ghz_band(hw);
 		if (cmd->caps & cpu_to_le32(MWL8K_CAP_MIMO))
 			mwl8k_set_ht_caps(hw, le32_to_cpu(cmd->caps));
 	}
@@ -1726,6 +1749,7 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
 		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
+		mwl8k_setup_2ghz_band(hw);
 
 		off = le32_to_cpu(cmd->wcbbase0) & 0xffff;
 		iowrite32(cpu_to_le32(priv->txq[0].txd_dma), priv->sram + off);
@@ -3853,17 +3877,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	priv->pending_tx_pkts = 0;
 
 
-	memcpy(priv->channels_24, mwl8k_channels_24, sizeof(mwl8k_channels_24));
-	priv->band_24.band = IEEE80211_BAND_2GHZ;
-	priv->band_24.channels = priv->channels_24;
-	priv->band_24.n_channels = ARRAY_SIZE(mwl8k_channels_24);
-	priv->band_24.bitrates = priv->rates_24;
-	priv->band_24.n_bitrates = ARRAY_SIZE(mwl8k_rates_24);
-	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band_24;
-
-	BUILD_BUG_ON(sizeof(priv->rates_24) != sizeof(mwl8k_rates_24));
-	memcpy(priv->rates_24, mwl8k_rates_24, sizeof(mwl8k_rates_24));
-
 	/*
 	 * Extra headroom is the size of the required DMA header
 	 * minus the size of the smallest 802.11 frame (CTS frame).
-- 
cgit v1.2.3


From 4eae9edd38c0a9ce34e39100ccc69ff520bc1224 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:48:32 +0100
Subject: mwl8k: add 5 GHz band channels and rates

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a17111f40266..13dded49323e 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -144,6 +144,9 @@ struct mwl8k_priv {
 	struct ieee80211_supported_band band_24;
 	struct ieee80211_channel channels_24[14];
 	struct ieee80211_rate rates_24[14];
+	struct ieee80211_supported_band band_50;
+	struct ieee80211_channel channels_50[4];
+	struct ieee80211_rate rates_50[9];
 
 	/* firmware access */
 	struct mutex fw_mutex;
@@ -252,6 +255,25 @@ static const struct ieee80211_rate mwl8k_rates_24[] = {
 	{ .bitrate = 720, .hw_value = 144, },
 };
 
+static const struct ieee80211_channel mwl8k_channels_50[] = {
+	{ .center_freq = 5180, .hw_value = 36, },
+	{ .center_freq = 5200, .hw_value = 40, },
+	{ .center_freq = 5220, .hw_value = 44, },
+	{ .center_freq = 5240, .hw_value = 48, },
+};
+
+static const struct ieee80211_rate mwl8k_rates_50[] = {
+	{ .bitrate = 60, .hw_value = 12, },
+	{ .bitrate = 90, .hw_value = 18, },
+	{ .bitrate = 120, .hw_value = 24, },
+	{ .bitrate = 180, .hw_value = 36, },
+	{ .bitrate = 240, .hw_value = 48, },
+	{ .bitrate = 360, .hw_value = 72, },
+	{ .bitrate = 480, .hw_value = 96, },
+	{ .bitrate = 540, .hw_value = 108, },
+	{ .bitrate = 720, .hw_value = 144, },
+};
+
 /* Set or get info from Firmware */
 #define MWL8K_CMD_SET			0x0001
 #define MWL8K_CMD_GET			0x0000
@@ -1579,6 +1601,25 @@ static void mwl8k_setup_2ghz_band(struct ieee80211_hw *hw)
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band_24;
 }
 
+static void mwl8k_setup_5ghz_band(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	BUILD_BUG_ON(sizeof(priv->channels_50) != sizeof(mwl8k_channels_50));
+	memcpy(priv->channels_50, mwl8k_channels_50, sizeof(mwl8k_channels_50));
+
+	BUILD_BUG_ON(sizeof(priv->rates_50) != sizeof(mwl8k_rates_50));
+	memcpy(priv->rates_50, mwl8k_rates_50, sizeof(mwl8k_rates_50));
+
+	priv->band_50.band = IEEE80211_BAND_5GHZ;
+	priv->band_50.channels = priv->channels_50;
+	priv->band_50.n_channels = ARRAY_SIZE(mwl8k_channels_50);
+	priv->band_50.bitrates = priv->rates_50;
+	priv->band_50.n_bitrates = ARRAY_SIZE(mwl8k_rates_50);
+
+	hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &priv->band_50;
+}
+
 /*
  * CMD_GET_HW_SPEC (STA version).
  */
-- 
cgit v1.2.3


From 854783444bab0024556c0aefdb0a860f2f1da286 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:48:56 +0100
Subject: mwl8k: properly set receive status rate index on 5 GHz receive

The mwl8k firmware uses indices into the 2.4 GHz band rate table for
the receive descriptor channel field even if the packet was received
on a 5 GHz channel, while mac80211 expects an index into the 5 GHz
band rate table when packets are received on the 5 GHz band, which
presents a mismatch as the 5 GHz band rate table lacks the five
non-OFDM rates that the 2.4 GHz rate table starts with.

To handle this properly, we need to substract 5 from the rate index
field if the packet was received on a 5 GHz channel (and was not
received at an MCS rate).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 13dded49323e..cc2ce61b7992 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -759,7 +759,13 @@ mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status,
 		}
 	}
 
-	status->band = IEEE80211_BAND_2GHZ;
+	if (rxd->channel > 14) {
+		status->band = IEEE80211_BAND_5GHZ;
+		if (!(status->flag & RX_FLAG_HT))
+			status->rate_idx -= 5;
+	} else {
+		status->band = IEEE80211_BAND_2GHZ;
+	}
 	status->freq = ieee80211_channel_to_frequency(rxd->channel);
 
 	*qos = rxd->qos_control;
@@ -850,7 +856,13 @@ mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status,
 	if (rate_info & MWL8K_STA_RATE_INFO_MCS_FORMAT)
 		status->flag |= RX_FLAG_HT;
 
-	status->band = IEEE80211_BAND_2GHZ;
+	if (rxd->channel > 14) {
+		status->band = IEEE80211_BAND_5GHZ;
+		if (!(status->flag & RX_FLAG_HT))
+			status->rate_idx -= 5;
+	} else {
+		status->band = IEEE80211_BAND_2GHZ;
+	}
 	status->freq = ieee80211_channel_to_frequency(rxd->channel);
 
 	*qos = rxd->qos_control;
-- 
cgit v1.2.3


From 8707d0262585423cdc053bf8db0912e53915e5e4 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:49:15 +0100
Subject: mwl8k: handle 5 GHz legacy rate bitmaps in firmware commands

Whenever mac80211 gives us a legacy rate bitmap in the context of the
5 GHz band, we need to remember to shift the bitmap left by 5 positions
before giving it to the firmware, as the firmware follows the bitmap
bit assignment of the 2.4 GHz rate table even if we're on the 5 GHz
band, and the 2.4 GHz rate table includes five non-OFDM rates at the
start that are not valid in the 5 GHz band.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index cc2ce61b7992..e370245b3901 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2836,6 +2836,7 @@ static int mwl8k_cmd_set_new_stn_add(struct ieee80211_hw *hw,
 				     struct ieee80211_sta *sta)
 {
 	struct mwl8k_cmd_set_new_stn *cmd;
+	u32 rates;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2848,7 +2849,11 @@ static int mwl8k_cmd_set_new_stn_add(struct ieee80211_hw *hw,
 	memcpy(cmd->mac_addr, sta->addr, ETH_ALEN);
 	cmd->stn_id = cpu_to_le16(sta->aid);
 	cmd->action = cpu_to_le16(MWL8K_STA_ACTION_ADD);
-	cmd->legacy_rates = cpu_to_le32(sta->supp_rates[IEEE80211_BAND_2GHZ]);
+	if (hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+		rates = sta->supp_rates[IEEE80211_BAND_2GHZ];
+	else
+		rates = sta->supp_rates[IEEE80211_BAND_5GHZ] << 5;
+	cmd->legacy_rates = cpu_to_le32(rates);
 	if (sta->ht_cap.ht_supported) {
 		cmd->ht_rates[0] = sta->ht_cap.mcs.rx_mask[0];
 		cmd->ht_rates[1] = sta->ht_cap.mcs.rx_mask[1];
@@ -2972,6 +2977,7 @@ static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
 {
 	struct mwl8k_cmd_update_stadb *cmd;
 	struct peer_capability_info *p;
+	u32 rates;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2990,8 +2996,11 @@ static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw,
 	p->ht_caps = sta->ht_cap.cap;
 	p->extended_ht_caps = (sta->ht_cap.ampdu_factor & 3) |
 		((sta->ht_cap.ampdu_density & 7) << 2);
-	legacy_rate_mask_to_array(p->legacy_rates,
-				  sta->supp_rates[IEEE80211_BAND_2GHZ]);
+	if (hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+		rates = sta->supp_rates[IEEE80211_BAND_2GHZ];
+	else
+		rates = sta->supp_rates[IEEE80211_BAND_5GHZ] << 5;
+	legacy_rate_mask_to_array(p->legacy_rates, rates);
 	memcpy(p->ht_rates, sta->ht_cap.mcs.rx_mask, 16);
 	p->interop = 1;
 	p->amsdu_enabled = 0;
@@ -3345,7 +3354,12 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			goto out;
 		}
 
-		ap_legacy_rates = ap->supp_rates[IEEE80211_BAND_2GHZ];
+		if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
+			ap_legacy_rates = ap->supp_rates[IEEE80211_BAND_2GHZ];
+		} else {
+			ap_legacy_rates =
+				ap->supp_rates[IEEE80211_BAND_5GHZ] << 5;
+		}
 		memcpy(ap_mcs_rates, ap->ht_cap.mcs.rx_mask, 16);
 
 		rcu_read_unlock();
@@ -3422,7 +3436,13 @@ mwl8k_bss_info_changed_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		 * beacons will always go out at 1 Mb/s).
 		 */
 		idx = ffs(vif->bss_conf.basic_rates);
-		rate = idx ? mwl8k_rates_24[idx - 1].hw_value : 2;
+		if (idx)
+			idx--;
+
+		if (hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+			rate = mwl8k_rates_24[idx].hw_value;
+		else
+			rate = mwl8k_rates_50[idx].hw_value;
 
 		mwl8k_cmd_use_fixed_rate_ap(hw, rate, rate);
 	}
-- 
cgit v1.2.3


From 42574ea2274ec0a2a9c58ab01be91b65e60a2291 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:49:18 +0100
Subject: mwl8k: allow selecting 5 GHz channels

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index e370245b3901..6e8c126aa5e0 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2222,6 +2222,8 @@ static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw,
 
 	if (channel->band == IEEE80211_BAND_2GHZ)
 		cmd->channel_flags |= cpu_to_le32(0x00000001);
+	else if (channel->band == IEEE80211_BAND_5GHZ)
+		cmd->channel_flags |= cpu_to_le32(0x00000004);
 
 	if (conf->channel_type == NL80211_CHAN_NO_HT ||
 	    conf->channel_type == NL80211_CHAN_HT20)
-- 
cgit v1.2.3


From 06953235f48c696b22c5ed45570680fb070f7277 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:49:41 +0100
Subject: mwl8k: use firmware capability field to decide which bands to
 register

Make the decision about whether to register the 2.4 and 5 GHz bands
with mac80211 by looking at the capability field in GET_HW_SPEC (STA
firmware only for now).  This enables 5 GHz STA operation.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 6e8c126aa5e0..382ef4305a3e 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1666,11 +1666,14 @@ struct mwl8k_cmd_get_hw_spec_sta {
 #define MWL8K_CAP_DELAY_BA		0x00003000
 #define MWL8K_CAP_MIMO			0x00000200
 #define MWL8K_CAP_40MHZ			0x00000100
+#define MWL8K_CAP_BAND_MASK		0x00000007
+#define MWL8K_CAP_5GHZ			0x00000004
+#define MWL8K_CAP_2GHZ4			0x00000001
 
-static void mwl8k_set_ht_caps(struct ieee80211_hw *hw, u32 cap)
+static void
+mwl8k_set_ht_caps(struct ieee80211_hw *hw,
+		  struct ieee80211_supported_band *band, u32 cap)
 {
-	struct mwl8k_priv *priv = hw->priv;
-	struct ieee80211_supported_band *band = &priv->band_24;
 	int rx_streams;
 	int tx_streams;
 
@@ -1716,6 +1719,24 @@ static void mwl8k_set_ht_caps(struct ieee80211_hw *hw, u32 cap)
 	}
 }
 
+static void
+mwl8k_set_caps(struct ieee80211_hw *hw, u32 caps)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	if ((caps & MWL8K_CAP_2GHZ4) || !(caps & MWL8K_CAP_BAND_MASK)) {
+		mwl8k_setup_2ghz_band(hw);
+		if (caps & MWL8K_CAP_MIMO)
+			mwl8k_set_ht_caps(hw, &priv->band_24, caps);
+	}
+
+	if (caps & MWL8K_CAP_5GHZ) {
+		mwl8k_setup_5ghz_band(hw);
+		if (caps & MWL8K_CAP_MIMO)
+			mwl8k_set_ht_caps(hw, &priv->band_50, caps);
+	}
+}
+
 static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
@@ -1746,9 +1767,7 @@ static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
-		mwl8k_setup_2ghz_band(hw);
-		if (cmd->caps & cpu_to_le32(MWL8K_CAP_MIMO))
-			mwl8k_set_ht_caps(hw, le32_to_cpu(cmd->caps));
+		mwl8k_set_caps(hw, le32_to_cpu(cmd->caps));
 	}
 
 	kfree(cmd);
-- 
cgit v1.2.3


From f5bb87cfba5ae9dd3724b846ac2fa7e033425c1c Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:49:51 +0100
Subject: mwl8k: convert the priv->vif pointer to a list of vifs

To prepare for adding multi-BSS support.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 51 ++++++++++++++++++++++++++++++--------------
 1 file changed, 35 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 382ef4305a3e..ee7d8a6329f8 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -160,7 +160,8 @@ struct mwl8k_priv {
 	/* TX quiesce completion, protected by fw_mutex and tx_lock */
 	struct completion *tx_wait;
 
-	struct ieee80211_vif *vif;
+	/* List of interfaces.  */
+	struct list_head vif_list;
 
 	/* power management status cookie from firmware */
 	u32 *cookie;
@@ -210,6 +211,9 @@ struct mwl8k_priv {
 
 /* Per interface specific private data */
 struct mwl8k_vif {
+	struct list_head list;
+	struct ieee80211_vif *vif;
+
 	/* Non AMPDU sequence number assigned by driver.  */
 	u16 seqno;
 };
@@ -3246,7 +3250,7 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 }
 
 static int mwl8k_add_interface(struct ieee80211_hw *hw,
-				struct ieee80211_vif *vif)
+			       struct ieee80211_vif *vif)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_vif *mwl8k_vif;
@@ -3254,7 +3258,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	/*
 	 * We only support one active interface at a time.
 	 */
-	if (priv->vif != NULL)
+	if (!list_empty(&priv->vif_list))
 		return -EBUSY;
 
 	/*
@@ -3275,14 +3279,13 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	if (priv->ap_fw)
 		mwl8k_cmd_set_new_stn_add_self(hw, vif);
 
-	/* Clean out driver private area */
+	/* Setup driver private area. */
 	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
-
-	/* Set Initial sequence number to zero */
+	mwl8k_vif->vif = vif;
 	mwl8k_vif->seqno = 0;
 
-	priv->vif = vif;
+	list_add_tail(&mwl8k_vif->list, &priv->vif_list);
 
 	return 0;
 }
@@ -3291,13 +3294,14 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 				   struct ieee80211_vif *vif)
 {
 	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif);
 
 	if (priv->ap_fw)
 		mwl8k_cmd_set_new_stn_del(hw, vif, vif->addr);
 
 	mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
 
-	priv->vif = NULL;
+	list_del(&mwl8k_vif->list);
 }
 
 static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
@@ -3526,7 +3530,7 @@ mwl8k_configure_filter_sniffer(struct ieee80211_hw *hw,
 	 * operation, so refuse to enable sniffer mode if a STA
 	 * interface is active.
 	 */
-	if (priv->vif != NULL) {
+	if (!list_empty(&priv->vif_list)) {
 		if (net_ratelimit())
 			printk(KERN_INFO "%s: not enabling sniffer "
 			       "mode because STA interface is active\n",
@@ -3547,6 +3551,14 @@ mwl8k_configure_filter_sniffer(struct ieee80211_hw *hw,
 	return 1;
 }
 
+static struct mwl8k_vif *mwl8k_first_vif(struct mwl8k_priv *priv)
+{
+	if (!list_empty(&priv->vif_list))
+		return list_entry(priv->vif_list.next, struct mwl8k_vif, list);
+
+	return NULL;
+}
+
 static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 				   unsigned int changed_flags,
 				   unsigned int *total_flags,
@@ -3595,6 +3607,7 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 			 */
 			mwl8k_cmd_set_pre_scan(hw);
 		} else {
+			struct mwl8k_vif *mwl8k_vif;
 			const u8 *bssid;
 
 			/*
@@ -3605,9 +3618,11 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 			 * (where the OUI part needs to be nonzero for
 			 * the BSSID to be accepted by POST_SCAN).
 			 */
-			bssid = "\x01\x00\x00\x00\x00\x00";
-			if (priv->vif != NULL)
-				bssid = priv->vif->bss_conf.bssid;
+			mwl8k_vif = mwl8k_first_vif(priv);
+			if (mwl8k_vif != NULL)
+				bssid = mwl8k_vif->vif->bss_conf.bssid;
+			else
+				bssid = "\x01\x00\x00\x00\x00\x00";
 
 			mwl8k_cmd_set_post_scan(hw, bssid);
 		}
@@ -3810,11 +3825,14 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 	struct mwl8k_priv *priv =
 		container_of(work, struct mwl8k_priv, finalize_join_worker);
 	struct sk_buff *skb = priv->beacon_skb;
+	struct mwl8k_vif *mwl8k_vif;
 
-	mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len,
-				priv->vif->bss_conf.dtim_period);
-	dev_kfree_skb(skb);
+	mwl8k_vif = mwl8k_first_vif(priv);
+	if (mwl8k_vif != NULL)
+		mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len,
+					mwl8k_vif->vif->bss_conf.dtim_period);
 
+	dev_kfree_skb(skb);
 	priv->beacon_skb = NULL;
 }
 
@@ -3986,7 +4004,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
 	hw->vif_data_size = sizeof(struct mwl8k_vif);
 	hw->sta_data_size = sizeof(struct mwl8k_sta);
-	priv->vif = NULL;
+
+	INIT_LIST_HEAD(&priv->vif_list);
 
 	/* Set default radio state and preamble */
 	priv->radio_on = 0;
-- 
cgit v1.2.3


From f57ca9c1af3c1e30a40ad99d75940176d8c3ff3a Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:50:14 +0100
Subject: mwl8k: prepare for posting per-vif firmware commands

One of the bytes in the mwl8k firmware command header is the 'macid'
byte, which for per-vif commands indicates which of the BSSes this
command is intended for.  (For commands that are not per-vif commands,
this byte can just be 0.)

This patch adds mwl8k_post_pervif_cmd(), which will take the macid
assigned to this interface (to be done in ->add_interface()), copy it
into the command packet macid field, and post the command as usual.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index ee7d8a6329f8..ea39ef64defe 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -214,6 +214,9 @@ struct mwl8k_vif {
 	struct list_head list;
 	struct ieee80211_vif *vif;
 
+	/* Firmware macid for this vif.  */
+	int macid;
+
 	/* Non AMPDU sequence number assigned by driver.  */
 	u16 seqno;
 };
@@ -419,7 +422,8 @@ static int mwl8k_request_firmware(struct mwl8k_priv *priv)
 struct mwl8k_cmd_pkt {
 	__le16	code;
 	__le16	length;
-	__le16	seq_num;
+	__u8	seq_num;
+	__u8	macid;
 	__le16	result;
 	char	payload[0];
 } __attribute__((packed));
@@ -477,6 +481,7 @@ static int mwl8k_load_fw_image(struct mwl8k_priv *priv,
 
 	cmd->code = cpu_to_le16(MWL8K_CMD_CODE_DNLD);
 	cmd->seq_num = 0;
+	cmd->macid = 0;
 	cmd->result = 0;
 
 	done = 0;
@@ -1595,6 +1600,15 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 	return rc;
 }
 
+static int mwl8k_post_pervif_cmd(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct mwl8k_cmd_pkt *cmd)
+{
+	if (vif != NULL)
+		cmd->macid = MWL8K_VIF(vif)->macid;
+	return mwl8k_post_cmd(hw, cmd);
+}
+
 /*
  * Setup code shared between STA and AP firmware images.
  */
@@ -3283,6 +3297,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 	mwl8k_vif->vif = vif;
+	mwl8k_vif->macid = 0;
 	mwl8k_vif->seqno = 0;
 
 	list_add_tail(&mwl8k_vif->list, &priv->vif_list);
-- 
cgit v1.2.3


From aa21d0f69a5ca28d33f584b8952cca154115fd26 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:50:36 +0100
Subject: mwl8k: post per-vif firmware commands as per-vif commands

SET_BEACON, SET_MAC_ADDR, BSS_START and SET_NEW_STN are the currently
supported firmware commands that are actually per-vif commands.  Use
mwl8k_post_pervif_cmd() for these commands, so that the macid of the
vif they operate on gets passed down into the firmware.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 49 +++++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index ea39ef64defe..d8cf43853de1 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -294,7 +294,7 @@ static const struct ieee80211_rate mwl8k_rates_50[] = {
 #define MWL8K_CMD_RADIO_CONTROL		0x001c
 #define MWL8K_CMD_RF_TX_POWER		0x001e
 #define MWL8K_CMD_RF_ANTENNA		0x0020
-#define MWL8K_CMD_SET_BEACON		0x0100
+#define MWL8K_CMD_SET_BEACON		0x0100		/* per-vif */
 #define MWL8K_CMD_SET_PRE_SCAN		0x0107
 #define MWL8K_CMD_SET_POST_SCAN		0x0108
 #define MWL8K_CMD_SET_RF_CHANNEL	0x010a
@@ -308,10 +308,10 @@ static const struct ieee80211_rate mwl8k_rates_50[] = {
 #define MWL8K_CMD_MIMO_CONFIG		0x0125
 #define MWL8K_CMD_USE_FIXED_RATE	0x0126
 #define MWL8K_CMD_ENABLE_SNIFFER	0x0150
-#define MWL8K_CMD_SET_MAC_ADDR		0x0202
+#define MWL8K_CMD_SET_MAC_ADDR		0x0202		/* per-vif */
 #define MWL8K_CMD_SET_RATEADAPT_MODE	0x0203
-#define MWL8K_CMD_BSS_START		0x1100
-#define MWL8K_CMD_SET_NEW_STN		0x1111
+#define MWL8K_CMD_BSS_START		0x1100		/* per-vif */
+#define MWL8K_CMD_SET_NEW_STN		0x1111		/* per-vif */
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 
 static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
@@ -2156,7 +2156,8 @@ struct mwl8k_cmd_set_beacon {
 	__u8 beacon[0];
 };
 
-static int mwl8k_cmd_set_beacon(struct ieee80211_hw *hw, u8 *beacon, int len)
+static int mwl8k_cmd_set_beacon(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif, u8 *beacon, int len)
 {
 	struct mwl8k_cmd_set_beacon *cmd;
 	int rc;
@@ -2170,7 +2171,7 @@ static int mwl8k_cmd_set_beacon(struct ieee80211_hw *hw, u8 *beacon, int len)
 	cmd->beacon_len = cpu_to_le16(len);
 	memcpy(cmd->beacon, beacon, len);
 
-	rc = mwl8k_post_cmd(hw, &cmd->header);
+	rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -2761,7 +2762,8 @@ struct mwl8k_cmd_set_mac_addr {
 #define MWL8K_MAC_TYPE_PRIMARY_CLIENT	0
 #define MWL8K_MAC_TYPE_PRIMARY_AP	2
 
-static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
+static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif, u8 *mac)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_set_mac_addr *cmd;
@@ -2780,7 +2782,7 @@ static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
 		memcpy(cmd->mac_addr, mac, ETH_ALEN);
 	}
 
-	rc = mwl8k_post_cmd(hw, &cmd->header);
+	rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -2823,7 +2825,8 @@ struct mwl8k_cmd_bss_start {
 	__le32 enable;
 } __attribute__((packed));
 
-static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw, int enable)
+static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif, int enable)
 {
 	struct mwl8k_cmd_bss_start *cmd;
 	int rc;
@@ -2836,7 +2839,7 @@ static int mwl8k_cmd_bss_start(struct ieee80211_hw *hw, int enable)
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->enable = cpu_to_le32(enable);
 
-	rc = mwl8k_post_cmd(hw, &cmd->header);
+	rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -2904,7 +2907,7 @@ static int mwl8k_cmd_set_new_stn_add(struct ieee80211_hw *hw,
 		cmd->is_qos_sta = 1;
 	}
 
-	rc = mwl8k_post_cmd(hw, &cmd->header);
+	rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -2924,7 +2927,7 @@ static int mwl8k_cmd_set_new_stn_add_self(struct ieee80211_hw *hw,
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	memcpy(cmd->mac_addr, vif->addr, ETH_ALEN);
 
-	rc = mwl8k_post_cmd(hw, &cmd->header);
+	rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -2945,7 +2948,7 @@ static int mwl8k_cmd_set_new_stn_del(struct ieee80211_hw *hw,
 	memcpy(cmd->mac_addr, addr, ETH_ALEN);
 	cmd->action = cpu_to_le16(MWL8K_STA_ACTION_REMOVE);
 
-	rc = mwl8k_post_cmd(hw, &cmd->header);
+	rc = mwl8k_post_pervif_cmd(hw, vif, &cmd->header);
 	kfree(cmd);
 
 	return rc;
@@ -3287,12 +3290,6 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 		return -EINVAL;
 	}
 
-	/* Set the mac address.  */
-	mwl8k_cmd_set_mac_addr(hw, vif->addr);
-
-	if (priv->ap_fw)
-		mwl8k_cmd_set_new_stn_add_self(hw, vif);
-
 	/* Setup driver private area. */
 	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
@@ -3300,6 +3297,12 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	mwl8k_vif->macid = 0;
 	mwl8k_vif->seqno = 0;
 
+	/* Set the mac address.  */
+	mwl8k_cmd_set_mac_addr(hw, vif, vif->addr);
+
+	if (priv->ap_fw)
+		mwl8k_cmd_set_new_stn_add_self(hw, vif);
+
 	list_add_tail(&mwl8k_vif->list, &priv->vif_list);
 
 	return 0;
@@ -3314,7 +3317,7 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 	if (priv->ap_fw)
 		mwl8k_cmd_set_new_stn_del(hw, vif, vif->addr);
 
-	mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+	mwl8k_cmd_set_mac_addr(hw, vif, "\x00\x00\x00\x00\x00\x00");
 
 	list_del(&mwl8k_vif->list);
 }
@@ -3492,13 +3495,13 @@ mwl8k_bss_info_changed_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 
 		skb = ieee80211_beacon_get(hw, vif);
 		if (skb != NULL) {
-			mwl8k_cmd_set_beacon(hw, skb->data, skb->len);
+			mwl8k_cmd_set_beacon(hw, vif, skb->data, skb->len);
 			kfree_skb(skb);
 		}
 	}
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED)
-		mwl8k_cmd_bss_start(hw, info->enable_beacon);
+		mwl8k_cmd_bss_start(hw, vif, info->enable_beacon);
 
 out:
 	mwl8k_fw_unlock(hw);
@@ -4112,7 +4115,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	}
 
 	/* Clear MAC address */
-	rc = mwl8k_cmd_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+	rc = mwl8k_cmd_set_mac_addr(hw, NULL, "\x00\x00\x00\x00\x00\x00");
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot clear MAC address\n",
 		       wiphy_name(hw->wiphy));
-- 
cgit v1.2.3


From ee0ddf1865954f44ee929d963e2c968eb377f447 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:51:30 +0100
Subject: mwl8k: enable multi-BSS AP operation

As follows:
- GET_HW_SPEC is now responsible for setting
  priv->{ap,sta}_macids_supported, which are bitmasks of supported
  macids for AP and STA mode.  (Typically, STA firmware images will
  support only one macid, #0, in STA mode, and AP firmware images
  will support macids #0-7, in AP mode.)
- Our wiphy ->interfaces_modes is now set based on the non-zero-ness
  of these two bitmasks.
- We main priv->macids_used, a bitmask of which macids are currently
  in use.  ->add_interface() will assign the lowest free macid for
  this interface type as it is created, or bail out if there are no
  more free macids to assign.  ->delete_interface() will mark the
  macid as being free again.

This enables the multi-BSS code added in the previous commits.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 70 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 56 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index d8cf43853de1..06dc7a0978a0 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -147,6 +147,8 @@ struct mwl8k_priv {
 	struct ieee80211_supported_band band_50;
 	struct ieee80211_channel channels_50[4];
 	struct ieee80211_rate rates_50[9];
+	u32 ap_macids_supported;
+	u32 sta_macids_supported;
 
 	/* firmware access */
 	struct mutex fw_mutex;
@@ -161,6 +163,7 @@ struct mwl8k_priv {
 	struct completion *tx_wait;
 
 	/* List of interfaces.  */
+	u32 macids_used;
 	struct list_head vif_list;
 
 	/* power management status cookie from firmware */
@@ -1786,6 +1789,8 @@ static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
 		mwl8k_set_caps(hw, le32_to_cpu(cmd->caps));
+		priv->ap_macids_supported = 0x00000000;
+		priv->sta_macids_supported = 0x00000001;
 	}
 
 	kfree(cmd);
@@ -1840,6 +1845,8 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
 		priv->hw_rev = cmd->hw_rev;
 		mwl8k_setup_2ghz_band(hw);
+		priv->ap_macids_supported = 0x000000ff;
+		priv->sta_macids_supported = 0x00000000;
 
 		off = le32_to_cpu(cmd->wcbbase0) & 0xffff;
 		iowrite32(cpu_to_le32(priv->txq[0].txd_dma), priv->sram + off);
@@ -2759,16 +2766,33 @@ struct mwl8k_cmd_set_mac_addr {
 	};
 } __attribute__((packed));
 
-#define MWL8K_MAC_TYPE_PRIMARY_CLIENT	0
-#define MWL8K_MAC_TYPE_PRIMARY_AP	2
+#define MWL8K_MAC_TYPE_PRIMARY_CLIENT		0
+#define MWL8K_MAC_TYPE_SECONDARY_CLIENT		1
+#define MWL8K_MAC_TYPE_PRIMARY_AP		2
+#define MWL8K_MAC_TYPE_SECONDARY_AP		3
 
 static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw,
 				  struct ieee80211_vif *vif, u8 *mac)
 {
 	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif);
 	struct mwl8k_cmd_set_mac_addr *cmd;
+	int mac_type;
 	int rc;
 
+	mac_type = MWL8K_MAC_TYPE_PRIMARY_AP;
+	if (vif != NULL && vif->type == NL80211_IFTYPE_STATION) {
+		if (mwl8k_vif->macid + 1 == ffs(priv->sta_macids_supported))
+			mac_type = MWL8K_MAC_TYPE_PRIMARY_CLIENT;
+		else
+			mac_type = MWL8K_MAC_TYPE_SECONDARY_CLIENT;
+	} else if (vif != NULL && vif->type == NL80211_IFTYPE_AP) {
+		if (mwl8k_vif->macid + 1 == ffs(priv->ap_macids_supported))
+			mac_type = MWL8K_MAC_TYPE_PRIMARY_AP;
+		else
+			mac_type = MWL8K_MAC_TYPE_SECONDARY_AP;
+	}
+
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
@@ -2776,7 +2800,7 @@ static int mwl8k_cmd_set_mac_addr(struct ieee80211_hw *hw,
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	if (priv->ap_fw) {
-		cmd->mbss.mac_type = cpu_to_le16(MWL8K_MAC_TYPE_PRIMARY_AP);
+		cmd->mbss.mac_type = cpu_to_le16(mac_type);
 		memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
 	} else {
 		memcpy(cmd->mac_addr, mac, ETH_ALEN);
@@ -3271,12 +3295,8 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_vif *mwl8k_vif;
-
-	/*
-	 * We only support one active interface at a time.
-	 */
-	if (!list_empty(&priv->vif_list))
-		return -EBUSY;
+	u32 macids_supported;
+	int macid;
 
 	/*
 	 * Reject interface creation if sniffer mode is active, as
@@ -3290,11 +3310,27 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 		return -EINVAL;
 	}
 
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_AP:
+		macids_supported = priv->ap_macids_supported;
+		break;
+	case NL80211_IFTYPE_STATION:
+		macids_supported = priv->sta_macids_supported;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	macid = ffs(macids_supported & ~priv->macids_used);
+	if (!macid--)
+		return -EBUSY;
+
 	/* Setup driver private area. */
 	mwl8k_vif = MWL8K_VIF(vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 	mwl8k_vif->vif = vif;
-	mwl8k_vif->macid = 0;
+	mwl8k_vif->macid = macid;
 	mwl8k_vif->seqno = 0;
 
 	/* Set the mac address.  */
@@ -3303,6 +3339,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	if (priv->ap_fw)
 		mwl8k_cmd_set_new_stn_add_self(hw, vif);
 
+	priv->macids_used |= 1 << mwl8k_vif->macid;
 	list_add_tail(&mwl8k_vif->list, &priv->vif_list);
 
 	return 0;
@@ -3319,6 +3356,7 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw,
 
 	mwl8k_cmd_set_mac_addr(hw, vif, "\x00\x00\x00\x00\x00\x00");
 
+	priv->macids_used &= ~(1 << mwl8k_vif->macid);
 	list_del(&mwl8k_vif->list);
 }
 
@@ -4023,6 +4061,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	hw->vif_data_size = sizeof(struct mwl8k_vif);
 	hw->sta_data_size = sizeof(struct mwl8k_sta);
 
+	priv->macids_used = 0;
 	INIT_LIST_HEAD(&priv->vif_list);
 
 	/* Set default radio state and preamble */
@@ -4094,12 +4133,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		rc = mwl8k_cmd_get_hw_spec_ap(hw);
 		if (!rc)
 			rc = mwl8k_cmd_set_hw_spec(hw);
-
-		hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP);
 	} else {
 		rc = mwl8k_cmd_get_hw_spec_sta(hw);
-
-		hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	}
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot initialise firmware\n",
@@ -4107,6 +4142,13 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		goto err_free_irq;
 	}
 
+	hw->wiphy->interface_modes = 0;
+	if (priv->ap_macids_supported)
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP);
+	if (priv->sta_macids_supported)
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_STATION);
+
+
 	/* Turn radio off */
 	rc = mwl8k_cmd_radio_disable(hw);
 	if (rc) {
-- 
cgit v1.2.3


From a5fb297d634ba20bd53a7d6fecd611bbfd342e78 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 12 Jan 2010 13:51:38 +0100
Subject: mwl8k: update version number (to 0.12) and copyright

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 06dc7a0978a0..68546ca0ba37 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2,7 +2,7 @@
  * drivers/net/wireless/mwl8k.c
  * Driver for Marvell TOPDOG 802.11 Wireless cards
  *
- * Copyright (C) 2008-2009 Marvell Semiconductor Inc.
+ * Copyright (C) 2008, 2009, 2010 Marvell Semiconductor Inc.
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -26,7 +26,7 @@
 
 #define MWL8K_DESC	"Marvell TOPDOG(R) 802.11 Wireless Network Driver"
 #define MWL8K_NAME	KBUILD_MODNAME
-#define MWL8K_VERSION	"0.11"
+#define MWL8K_VERSION	"0.12"
 
 /* Register definitions */
 #define MWL8K_HIU_GEN_PTR			0x00000c10
-- 
cgit v1.2.3


From 608f8a0d014db6cd18d4f535934d4b5d556e3013 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Wed, 13 Jan 2010 02:04:58 +0000
Subject: e1000e: use alternate MAC address on ESB2 if available

Similar to 82571/2/3 parts that already do this, if ESB2/80003es2lan parts
have an alternate MAC address provided in the EEPROM use it instead of the
default MAC address.  This patch makes the the actual code that does this
generic so that it can be better used by both MAC families.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/82571.c   |  33 ++++++++++--
 drivers/net/e1000e/defines.h |   2 +
 drivers/net/e1000e/e1000.h   |  11 +++-
 drivers/net/e1000e/es2lan.c  |  28 +++++++++-
 drivers/net/e1000e/hw.h      |   5 +-
 drivers/net/e1000e/lib.c     | 124 +++++++++++++++++++++++++------------------
 drivers/net/e1000e/netdev.c  |   2 +-
 7 files changed, 147 insertions(+), 58 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 02d67d047d96..d1a45143c2aa 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -922,9 +922,12 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	ew32(IMC, 0xffffffff);
 	icr = er32(ICR);
 
-	if (hw->mac.type == e1000_82571 &&
-		hw->dev_spec.e82571.alt_mac_addr_is_present)
-			e1000e_set_laa_state_82571(hw, true);
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	e1000e_set_laa_state_82571(hw, true);
 
 	/* Reinitialize the 82571 serdes link state machine */
 	if (hw->phy.media_type == e1000_media_type_internal_serdes)
@@ -1620,6 +1623,29 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
 	return 0;
 }
 
+/**
+ *  e1000_read_mac_addr_82571 - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	/*
+	 * If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_read_mac_addr_generic(hw);
+
+out:
+	return ret_val;
+}
+
 /**
  * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
  * @hw: pointer to the HW structure
@@ -1706,6 +1732,7 @@ static struct e1000_mac_operations e82571_mac_ops = {
 	.setup_link		= e1000_setup_link_82571,
 	/* .setup_physical_interface: media type dependent */
 	.setup_led		= e1000e_setup_led_generic,
+	.read_mac_addr		= e1000_read_mac_addr_82571,
 };
 
 static struct e1000_phy_operations e82_phy_ops_igp = {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index e02e38221ed4..db05ec355749 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -460,6 +460,8 @@
  */
 #define E1000_RAR_ENTRIES     15
 #define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
 
 /* Error Codes */
 #define E1000_ERR_NVM      1
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index cebbd9079d53..7c91e4bdd361 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -529,6 +529,7 @@ extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
 extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
 extern s32 e1000e_blink_led(struct e1000_hw *hw);
 extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
 extern void e1000e_reset_adaptive(struct e1000_hw *hw);
 extern void e1000e_update_adaptive(struct e1000_hw *hw);
 
@@ -629,7 +630,15 @@ extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16
 extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
 extern void e1000e_release_nvm(struct e1000_hw *hw);
 extern void e1000e_reload_nvm(struct e1000_hw *hw);
-extern s32 e1000e_read_mac_addr(struct e1000_hw *hw);
+extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
+
+static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.read_mac_addr)
+		return hw->mac.ops.read_mac_addr(hw);
+
+	return e1000_read_mac_addr_generic(hw);
+}
 
 static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
 {
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index e2aa3b788564..4bb9d88ad976 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -814,7 +814,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	ew32(IMC, 0xffffffff);
 	icr = er32(ICR);
 
-	return 0;
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+
+	return ret_val;
 }
 
 /**
@@ -1339,6 +1341,29 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 	return ret_val;
 }
 
+/**
+ *  e1000_read_mac_addr_80003es2lan - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	/*
+	 * If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = e1000_read_mac_addr_generic(hw);
+
+out:
+	return ret_val;
+}
+
 /**
  * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
  * @hw: pointer to the HW structure
@@ -1403,6 +1428,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 }
 
 static struct e1000_mac_operations es2_mac_ops = {
+	.read_mac_addr		= e1000_read_mac_addr_80003es2lan,
 	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000e_check_mng_mode_generic,
 	/* check_for_link dependent on media type */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index eccf29b75c41..127e6a226da1 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -389,6 +389,9 @@ enum e1e_registers {
 
 #define E1000_FUNC_1 1
 
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0   0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1   3
+
 enum e1000_mac_type {
 	e1000_82571,
 	e1000_82572,
@@ -756,6 +759,7 @@ struct e1000_mac_operations {
 	s32  (*setup_physical_interface)(struct e1000_hw *);
 	s32  (*setup_led)(struct e1000_hw *);
 	void (*write_vfta)(struct e1000_hw *, u32, u32);
+	s32  (*read_mac_addr)(struct e1000_hw *);
 };
 
 /* Function pointers for the PHY. */
@@ -897,7 +901,6 @@ struct e1000_fc_info {
 
 struct e1000_dev_spec_82571 {
 	bool laa_is_present;
-	bool alt_mac_addr_is_present;
 	u32 smb_counter;
 };
 
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 2fa9b36a2c5a..547542428edc 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -138,6 +138,68 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
 		e1000e_rar_set(hw, mac_addr, i);
 }
 
+/**
+ *  e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the nvm for an alternate MAC address.  An alternate MAC address
+ *  can be setup by pre-boot software and must be treated like a permanent
+ *  address and must override the actual permanent MAC address. If an
+ *  alternate MAC address is found it is programmed into RAR0, replacing
+ *  the permanent address that was installed into RAR0 by the Si on reset.
+ *  This function will return SUCCESS unless it encounters an error while
+ *  reading the EEPROM.
+ **/
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
+{
+	u32 i;
+	s32 ret_val = 0;
+	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+	u8 alt_mac_addr[ETH_ALEN];
+
+	ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+	                         &nvm_alt_mac_addr_offset);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if (nvm_alt_mac_addr_offset == 0xFFFF) {
+		/* There is no Alternate MAC Address */
+		goto out;
+	}
+
+	if (hw->bus.func == E1000_FUNC_1)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+	for (i = 0; i < ETH_ALEN; i += 2) {
+		offset = nvm_alt_mac_addr_offset + (i >> 1);
+		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
+		if (ret_val) {
+			e_dbg("NVM Read Error\n");
+			goto out;
+		}
+
+		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+	}
+
+	/* if multicast bit is set, the alternate address will not be used */
+	if (alt_mac_addr[0] & 0x01) {
+		e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+		goto out;
+	}
+
+	/*
+	 * We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	e1000e_rar_set(hw, alt_mac_addr, 0);
+
+out:
+	return ret_val;
+}
+
 /**
  *  e1000e_rar_set - Set receive address register
  *  @hw: pointer to the HW structure
@@ -2072,67 +2134,27 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 }
 
 /**
- *  e1000e_read_mac_addr - Read device MAC address
+ *  e1000_read_mac_addr_generic - Read device MAC address
  *  @hw: pointer to the HW structure
  *
  *  Reads the device MAC address from the EEPROM and stores the value.
  *  Since devices with two ports use the same EEPROM, we increment the
  *  last bit in the MAC address for the second port.
  **/
-s32 e1000e_read_mac_addr(struct e1000_hw *hw)
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
 {
-	s32 ret_val;
-	u16 offset, nvm_data, i;
-	u16 mac_addr_offset = 0;
-
-	if (hw->mac.type == e1000_82571) {
-		/* Check for an alternate MAC address.  An alternate MAC
-		 * address can be setup by pre-boot software and must be
-		 * treated like a permanent address and must override the
-		 * actual permanent MAC address.*/
-		ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
-					 &mac_addr_offset);
-		if (ret_val) {
-			e_dbg("NVM Read Error\n");
-			return ret_val;
-		}
-		if (mac_addr_offset == 0xFFFF)
-			mac_addr_offset = 0;
-
-		if (mac_addr_offset) {
-			if (hw->bus.func == E1000_FUNC_1)
-				mac_addr_offset += ETH_ALEN/sizeof(u16);
-
-			/* make sure we have a valid mac address here
-			* before using it */
-			ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
-						 &nvm_data);
-			if (ret_val) {
-				e_dbg("NVM Read Error\n");
-				return ret_val;
-			}
-			if (nvm_data & 0x0001)
-				mac_addr_offset = 0;
-		}
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
 
-		if (mac_addr_offset)
-		hw->dev_spec.e82571.alt_mac_addr_is_present = 1;
-	}
+	rar_high = er32(RAH(0));
+	rar_low = er32(RAL(0));
 
-	for (i = 0; i < ETH_ALEN; i += 2) {
-		offset = mac_addr_offset + (i >> 1);
-		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
-		if (ret_val) {
-			e_dbg("NVM Read Error\n");
-			return ret_val;
-		}
-		hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
-		hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8);
-	}
+	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
 
-	/* Flip last bit of mac address if we're on second port */
-	if (!mac_addr_offset && hw->bus.func == E1000_FUNC_1)
-		hw->mac.perm_addr[5] ^= 1;
+	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
 
 	for (i = 0; i < ETH_ALEN; i++)
 		hw->mac.addr[i] = hw->mac.perm_addr[i];
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c3745c9d21aa..0d5ef4c5c6db 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -5135,7 +5135,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	e1000_eeprom_checks(adapter);
 
-	/* copy the MAC address out of the NVM */
+	/* copy the MAC address */
 	if (e1000e_read_mac_addr(&adapter->hw))
 		e_err("NVM Read Error while reading MAC address\n");
 
-- 
cgit v1.2.3


From f4d2dd4cd4d001f5dc20fc76c780c0c20c000c23 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Wed, 13 Jan 2010 02:05:18 +0000
Subject: e1000e: provide MAC-family-specific function to set LAN ID

Provide MAC-specific function pointer to determine the LAN ID (PCI func).
The LAN ID is used internally by the driver to determine which h/w lock
to use to protect accessing the PHY on ESB2 as well as help to determine
the alternate MAC address on some parts.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/82571.c   |  7 +++++++
 drivers/net/e1000e/e1000.h   |  2 ++
 drivers/net/e1000e/es2lan.c  |  4 ++++
 drivers/net/e1000e/hw.h      |  1 +
 drivers/net/e1000e/ich8lan.c |  1 +
 drivers/net/e1000e/lib.c     | 48 ++++++++++++++++++++++++++++++++++----------
 6 files changed, 52 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index d1a45143c2aa..7674a91824bc 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -267,8 +267,14 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	}
 
 	switch (hw->mac.type) {
+	case e1000_82573:
+		func->set_lan_id = e1000_set_lan_id_single_port;
+		func->check_mng_mode = e1000e_check_mng_mode_generic;
+		func->led_on = e1000e_led_on_generic;
+		break;
 	case e1000_82574:
 	case e1000_82583:
+		func->set_lan_id = e1000_set_lan_id_single_port;
 		func->check_mng_mode = e1000_check_mng_mode_82574;
 		func->led_on = e1000_led_on_82574;
 		break;
@@ -1721,6 +1727,7 @@ static struct e1000_mac_operations e82571_mac_ops = {
 	.cleanup_led		= e1000e_cleanup_led_generic,
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_82571,
 	.get_bus_info		= e1000e_get_bus_info_pcie,
+	.set_lan_id		= e1000_set_lan_id_multi_port_pcie,
 	/* .get_link_up_info: media type dependent */
 	/* .led_on: mac type dependent */
 	.led_off		= e1000e_led_off_generic,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 7c91e4bdd361..8b311ce0400e 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -502,6 +502,8 @@ extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
 extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
 extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
 extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
+extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
+extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
 extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
 extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
 extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 4bb9d88ad976..27d21589a69a 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -246,6 +246,9 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 		break;
 	}
 
+	/* set lan id for port to determine which phy lock to use */
+	hw->mac.ops.set_lan_id(hw);
+
 	return 0;
 }
 
@@ -1435,6 +1438,7 @@ static struct e1000_mac_operations es2_mac_ops = {
 	.cleanup_led		= e1000e_cleanup_led_generic,
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_80003es2lan,
 	.get_bus_info		= e1000e_get_bus_info_pcie,
+	.set_lan_id		= e1000_set_lan_id_multi_port_pcie,
 	.get_link_up_info	= e1000_get_link_up_info_80003es2lan,
 	.led_on			= e1000e_led_on_generic,
 	.led_off		= e1000e_led_off_generic,
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 127e6a226da1..9cac5d9b94b8 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -749,6 +749,7 @@ struct e1000_mac_operations {
 	void (*clear_hw_cntrs)(struct e1000_hw *);
 	void (*clear_vfta)(struct e1000_hw *);
 	s32  (*get_bus_info)(struct e1000_hw *);
+	void (*set_lan_id)(struct e1000_hw *);
 	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
 	s32  (*led_on)(struct e1000_hw *);
 	s32  (*led_off)(struct e1000_hw *);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index ad08cf3f40c0..061cd100aac2 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -3302,6 +3302,7 @@ static struct e1000_mac_operations ich8_mac_ops = {
 	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
 	.get_bus_info		= e1000_get_bus_info_ich8lan,
+	.set_lan_id		= e1000_set_lan_id_single_port,
 	.get_link_up_info	= e1000_get_link_up_info_ich8lan,
 	/* led_on dependent on mac type */
 	/* led_off dependent on mac type */
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 547542428edc..5f6b17148d34 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -51,10 +51,10 @@ enum e1000_mng_mode {
  **/
 s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 {
+	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_bus_info *bus = &hw->bus;
 	struct e1000_adapter *adapter = hw->adapter;
-	u32 status;
-	u16 pcie_link_status, pci_header_type, cap_offset;
+	u16 pcie_link_status, cap_offset;
 
 	cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
 	if (!cap_offset) {
@@ -68,19 +68,45 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 						    PCIE_LINK_WIDTH_SHIFT);
 	}
 
-	pci_read_config_word(adapter->pdev, PCI_HEADER_TYPE_REGISTER,
-			     &pci_header_type);
-	if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) {
-		status = er32(STATUS);
-		bus->func = (status & E1000_STATUS_FUNC_MASK)
-			    >> E1000_STATUS_FUNC_SHIFT;
-	} else {
-		bus->func = 0;
-	}
+	mac->ops.set_lan_id(hw);
 
 	return 0;
 }
 
+/**
+ *  e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	/*
+	 * The status register reports the correct function number
+	 * for the device regardless of function swap state.
+	 */
+	reg = er32(STATUS);
+	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+}
+
+/**
+ *  e1000_set_lan_id_single_port - Set LAN id for a single port device
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the LAN function id to zero for a single port device.
+ **/
+void e1000_set_lan_id_single_port(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+
+	bus->func = 0;
+}
+
 /**
  *  e1000_clear_vfta_generic - Clear VLAN filter table
  *  @hw: pointer to the HW structure
-- 
cgit v1.2.3


From ab8932f3e8e07df92d6ce3fa41f5af0dda865429 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Wed, 13 Jan 2010 02:05:38 +0000
Subject: e1000e: genericize the update multicast address list

Make updating the multicast address list generic for all families and
enforce the requirement to update the entire multicast table array all at
once instead of piecemeal which causes problems on some parts.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/82571.c  | 28 +---------------------
 drivers/net/e1000e/e1000.h  |  4 +---
 drivers/net/e1000e/hw.h     |  6 ++++-
 drivers/net/e1000e/lib.c    | 58 ++++++++++++---------------------------------
 drivers/net/e1000e/netdev.c | 20 ++++------------
 5 files changed, 27 insertions(+), 89 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 7674a91824bc..3c95acb3a87d 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1233,32 +1233,6 @@ static s32 e1000_led_on_82574(struct e1000_hw *hw)
 	return 0;
 }
 
-/**
- *  e1000_update_mc_addr_list_82571 - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
- *
- *  Updates the Receive Address Registers and Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.
- **/
-static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw,
-					    u8 *mc_addr_list,
-					    u32 mc_addr_count,
-					    u32 rar_used_count,
-					    u32 rar_count)
-{
-	if (e1000e_get_laa_state_82571(hw))
-		rar_count--;
-
-	e1000e_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count,
-					   rar_used_count, rar_count);
-}
-
 /**
  *  e1000_setup_link_82571 - Setup flow control and link settings
  *  @hw: pointer to the HW structure
@@ -1731,7 +1705,7 @@ static struct e1000_mac_operations e82571_mac_ops = {
 	/* .get_link_up_info: media type dependent */
 	/* .led_on: mac type dependent */
 	.led_off		= e1000e_led_off_generic,
-	.update_mc_addr_list	= e1000_update_mc_addr_list_82571,
+	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
 	.write_vfta		= e1000_write_vfta_generic,
 	.clear_vfta		= e1000_clear_vfta_82571,
 	.reset_hw		= e1000_reset_hw_82571,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 8b311ce0400e..aec378e7441d 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -518,9 +518,7 @@ extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
 extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
 extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
 					       u8 *mc_addr_list,
-					       u32 mc_addr_count,
-					       u32 rar_used_count,
-					       u32 rar_count);
+					       u32 mc_addr_count);
 extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
 extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
 extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 9cac5d9b94b8..8bdcd5f24eff 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -753,7 +753,7 @@ struct e1000_mac_operations {
 	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
 	s32  (*led_on)(struct e1000_hw *);
 	s32  (*led_off)(struct e1000_hw *);
-	void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32, u32);
+	void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
 	s32  (*reset_hw)(struct e1000_hw *);
 	s32  (*init_hw)(struct e1000_hw *);
 	s32  (*setup_link)(struct e1000_hw *);
@@ -819,6 +819,10 @@ struct e1000_mac_info {
 	u16 ifs_ratio;
 	u16 ifs_step_size;
 	u16 mta_reg_count;
+
+	/* Maximum size of the MTA register table in all supported adapters */
+	#define MAX_MTA_REG 128
+	u32 mta_shadow[MAX_MTA_REG];
 	u16 rar_entry_count;
 
 	u8  forced_speed_duplex;
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 5f6b17148d34..2425ed11d5cc 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -340,62 +340,34 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
  *  @hw: pointer to the HW structure
  *  @mc_addr_list: array of multicast addresses to program
  *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
  *
- *  Updates the Receive Address Registers and Multicast Table Array.
+ *  Updates entire Multicast Table Array.
  *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.
  **/
 void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
-					u8 *mc_addr_list, u32 mc_addr_count,
-					u32 rar_used_count, u32 rar_count)
+					u8 *mc_addr_list, u32 mc_addr_count)
 {
-	u32 i;
-	u32 *mcarray = kzalloc(hw->mac.mta_reg_count * sizeof(u32), GFP_ATOMIC);
+	u32 hash_value, hash_bit, hash_reg;
+	int i;
 
-	if (!mcarray) {
-		printk(KERN_ERR "multicast array memory allocation failed\n");
-		return;
-	}
+	/* clear mta_shadow */
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
 
-	/*
-	 * Load the first set of multicast addresses into the exact
-	 * filters (RAR).  If there are not enough to fill the RAR
-	 * array, clear the filters.
-	 */
-	for (i = rar_used_count; i < rar_count; i++) {
-		if (mc_addr_count) {
-			e1000e_rar_set(hw, mc_addr_list, i);
-			mc_addr_count--;
-			mc_addr_list += ETH_ALEN;
-		} else {
-			E1000_WRITE_REG_ARRAY(hw, E1000_RA, i << 1, 0);
-			e1e_flush();
-			E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1) + 1, 0);
-			e1e_flush();
-		}
-	}
-
-	/* Load any remaining multicast addresses into the hash table. */
-	for (; mc_addr_count > 0; mc_addr_count--) {
-		u32 hash_value, hash_reg, hash_bit, mta;
+	/* update mta_shadow from mc_addr_list */
+	for (i = 0; (u32) i < mc_addr_count; i++) {
 		hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-		e_dbg("Hash value = 0x%03X\n", hash_value);
+
 		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
 		hash_bit = hash_value & 0x1F;
-		mta = (1 << hash_bit);
-		mcarray[hash_reg] |= mta;
-		mc_addr_list += ETH_ALEN;
-	}
 
-	/* write the hash table completely */
-	for (i = 0; i < hw->mac.mta_reg_count; i++)
-		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, mcarray[i]);
+		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+		mc_addr_list += (ETH_ALEN);
+	}
 
+	/* replace the entire MTA table */
+	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
 	e1e_flush();
-	kfree(mcarray);
 }
 
 /**
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0d5ef4c5c6db..3d57ca5482f4 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2536,22 +2536,14 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
  *  @hw: pointer to the HW structure
  *  @mc_addr_list: array of multicast addresses to program
  *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
  *
- *  Updates the Receive Address Registers and Multicast Table Array.
+ *  Updates the Multicast Table Array.
  *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.  Currently no func pointer
- *  exists and all implementations are handled in the generic version of this
- *  function.
  **/
 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
-				      u32 mc_addr_count, u32 rar_used_count,
-				      u32 rar_count)
+				      u32 mc_addr_count)
 {
-	hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count,
-				        rar_used_count, rar_count);
+	hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
 }
 
 /**
@@ -2567,7 +2559,6 @@ static void e1000_set_multi(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	struct e1000_mac_info *mac = &hw->mac;
 	struct dev_mc_list *mc_ptr;
 	u8  *mta_list;
 	u32 rctl;
@@ -2609,15 +2600,14 @@ static void e1000_set_multi(struct net_device *netdev)
 			mc_ptr = mc_ptr->next;
 		}
 
-		e1000_update_mc_addr_list(hw, mta_list, i, 1,
-					  mac->rar_entry_count);
+		e1000_update_mc_addr_list(hw, mta_list, i);
 		kfree(mta_list);
 	} else {
 		/*
 		 * if we're called from probe, we might not have
 		 * anything to do here, so clear out the list
 		 */
-		e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count);
+		e1000_update_mc_addr_list(hw, NULL, 0);
 	}
 }
 
-- 
cgit v1.2.3


From 37fce430dd66a6251bde6ef0004a1da69b26c028 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 12 Jan 2010 20:59:13 +0000
Subject: drivers/net/tlan: Remove TRUE/FALSE defines, use bool

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tlan.c | 28 ++++++++++++++--------------
 drivers/net/tlan.h |  3 ---
 2 files changed, 14 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 613943eb6e75..3ec31dce99f9 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -338,7 +338,7 @@ static int	TLan_PhyInternalService( struct net_device * );
 static int	TLan_PhyDp83840aCheck( struct net_device * );
 */
 
-static int	TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
+static bool	TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
 static void	TLan_MiiSendData( u16, u32, unsigned );
 static void	TLan_MiiSync( u16 );
 static void	TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
@@ -2204,7 +2204,7 @@ TLan_ResetAdapter( struct net_device *dev )
 	u32		data;
 	u8		data8;
 
-	priv->tlanFullDuplex = FALSE;
+	priv->tlanFullDuplex = false;
 	priv->phyOnline=0;
 	netif_carrier_off(dev);
 
@@ -2259,7 +2259,7 @@ TLan_ResetAdapter( struct net_device *dev )
 			TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
 		} else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
 			TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
-			priv->tlanFullDuplex = TRUE;
+			priv->tlanFullDuplex = true;
 		} else {
 			TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
 		}
@@ -2651,14 +2651,14 @@ static void TLan_PhyStartLink( struct net_device *dev )
 			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
 		} else if ( priv->speed == TLAN_SPEED_10 &&
 			    priv->duplex == TLAN_DUPLEX_FULL) {
-			priv->tlanFullDuplex = TRUE;
+			priv->tlanFullDuplex = true;
 			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
 		} else if ( priv->speed == TLAN_SPEED_100 &&
 			    priv->duplex == TLAN_DUPLEX_HALF) {
 			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
 		} else if ( priv->speed == TLAN_SPEED_100 &&
 			    priv->duplex == TLAN_DUPLEX_FULL) {
-			priv->tlanFullDuplex = TRUE;
+			priv->tlanFullDuplex = true;
 			TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
 		} else {
 
@@ -2695,7 +2695,7 @@ static void TLan_PhyStartLink( struct net_device *dev )
                 	tctl &= ~TLAN_TC_AUISEL;
 			if ( priv->duplex == TLAN_DUPLEX_FULL ) {
 				control |= MII_GC_DUPLEX;
-				priv->tlanFullDuplex = TRUE;
+				priv->tlanFullDuplex = true;
 			}
 			if ( priv->speed == TLAN_SPEED_100 ) {
 				control |= MII_GC_SPEEDSEL;
@@ -2750,9 +2750,9 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
 	TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
 	mode = an_adv & an_lpa & 0x03E0;
 	if ( mode & 0x0100 ) {
-		priv->tlanFullDuplex = TRUE;
+		priv->tlanFullDuplex = true;
 	} else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
-		priv->tlanFullDuplex = TRUE;
+		priv->tlanFullDuplex = true;
 	}
 
 	if ( ( ! ( mode & 0x0180 ) ) &&
@@ -2855,8 +2855,8 @@ void TLan_PhyMonitor( struct net_device *dev )
 	 *	TLan_MiiReadReg
 	 *
 	 *	Returns:
-	 *		0	if ack received ok
-	 *		1	otherwise.
+	 *		false	if ack received ok
+	 *		true	if no ack received or other error
 	 *
 	 *	Parms:
 	 *		dev		The device structure containing
@@ -2875,17 +2875,17 @@ void TLan_PhyMonitor( struct net_device *dev )
 	 *
 	 **************************************************************/
 
-static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+static bool TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
 {
 	u8	nack;
 	u16	sio, tmp;
  	u32	i;
-	int	err;
+	bool	err;
 	int	minten;
 	TLanPrivateInfo *priv = netdev_priv(dev);
 	unsigned long flags = 0;
 
-	err = FALSE;
+	err = false;
 	outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
 	sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
 
@@ -2918,7 +2918,7 @@ static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
 			TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
 		}
 		tmp = 0xffff;
-		err = TRUE;
+		err = true;
 	} else {					/* ACK, so read data */
 		for (tmp = 0, i = 0x8000; i; i >>= 1) {
 			TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
diff --git a/drivers/net/tlan.h b/drivers/net/tlan.h
index 4b82f283e985..d13ff12d7500 100644
--- a/drivers/net/tlan.h
+++ b/drivers/net/tlan.h
@@ -31,9 +31,6 @@
 	 *
 	 ****************************************************************/
 
-#define FALSE			0
-#define TRUE			1
-
 #define TLAN_MIN_FRAME_SIZE	64
 #define TLAN_MAX_FRAME_SIZE	1600
 
-- 
cgit v1.2.3


From 79b6a5110abf6fd4454ba34e0960783a4a2c801a Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Thu, 14 Jan 2010 17:00:54 -0500
Subject: Revert "iwmc3200wifi: fix array out-of-boundary access"

This reverts commit 6c853da3f30c93eae847ecbcd9fdf10ba0da04c2.

From Message-ID: <1262663293.551.117.camel@debian>
On Sat, 2010-01-02 at 22:09 +0800, Dan Carpenter wrote:
> It don't think 6c853da3f30c93 is right.  That's the patch
> titled "iwmc3200wifi: fix array out-of-boundary access"
>
>       Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array
>       index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH().
>
> In 2.6.33-rc2 IWM_RX_ID_GET_HASH() doesn't go as high as IWM_RX_ID_HASH
> and I don't see any array out-of-bounds.
>
> #define IWM_RX_ID_GET_HASH(id) ((id) % IWM_RX_ID_HASH)

Ah, you are right. I took '%' for '&'. John, would you revert it? Sorry
for the false alarm.

Thanks,
-yi

Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/iwm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 842811142bef..79ffa3b98d73 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -268,7 +268,7 @@ struct iwm_priv {
 
 	struct sk_buff_head rx_list;
 	struct list_head rx_tickets;
-	struct list_head rx_packets[IWM_RX_ID_HASH + 1];
+	struct list_head rx_packets[IWM_RX_ID_HASH];
 	struct workqueue_struct *rx_wq;
 	struct work_struct rx_worker;
 
-- 
cgit v1.2.3


From a0e803a2112398150daa4d88c9d58409e0cf0b6c Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Wed, 13 Jan 2010 12:09:08 +0100
Subject: iwmc3200wifi: Add UMAC wifi headers to the pmkid command

Without this header, we can trigger a UMAC crash with debug enabled UMACs.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/commands.c | 4 ++++
 drivers/net/wireless/iwmc3200wifi/commands.h | 1 +
 2 files changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 777584d76a88..1e41ad0fcad5 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -973,6 +973,10 @@ int iwm_send_pmkid_update(struct iwm_priv *iwm,
 
 	memset(&update, 0, sizeof(struct iwm_umac_pmkid_update));
 
+	update.hdr.oid = UMAC_WIFI_IF_CMD_PMKID_UPDATE;
+	update.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_pmkid_update) -
+					  sizeof(struct iwm_umac_wifi_if));
+
 	update.command = cpu_to_le32(command);
 	if (pmksa->bssid)
 		memcpy(&update.bssid, pmksa->bssid, ETH_ALEN);
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
index 06af0552cd75..3dfd9f0e9003 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.h
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -463,6 +463,7 @@ struct iwm_umac_cmd_stop_resume_tx {
 #define IWM_CMD_PMKID_FLUSH 3
 
 struct iwm_umac_pmkid_update {
+	struct iwm_umac_wifi_if hdr;
 	__le32 command;
 	u8 bssid[ETH_ALEN];
 	__le16 reserved;
-- 
cgit v1.2.3


From 6021e08db47386507108a475e6c820a7006a4632 Mon Sep 17 00:00:00 2001
From: Tim Gardner <tim.gardner@canonical.com>
Date: Thu, 7 Jan 2010 11:10:38 -0700
Subject: b43: Declare at least one real firmware file using MODULE_FIRMWARE.

BugLink: http://bugs.launchpad.net/bugs/488636

Enhances module information with the names of the firmware files
that could be used by this driver. This helps tools like Jockey to
correctly detect and/or install the firmware files relevant to
this driver.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6634a77fc766..881afff86bd3 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -67,7 +67,12 @@ MODULE_AUTHOR("Gábor Stefanik");
 MODULE_LICENSE("GPL");
 
 MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
-
+MODULE_FIRMWARE("b43/ucode11.fw");
+MODULE_FIRMWARE("b43/ucode13.fw");
+MODULE_FIRMWARE("b43/ucode14.fw");
+MODULE_FIRMWARE("b43/ucode15.fw");
+MODULE_FIRMWARE("b43/ucode5.fw");
+MODULE_FIRMWARE("b43/ucode9.fw");
 
 static int modparam_bad_frames_preempt;
 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
-- 
cgit v1.2.3


From c2f4f527edab37f2f2130bd7813cd41db907ab6b Mon Sep 17 00:00:00 2001
From: Tim Gardner <tim.gardner@canonical.com>
Date: Tue, 12 Jan 2010 12:58:17 -0600
Subject: b43legacy: Declare all possible ucodeX.fw files

Enhance module information with the names of the firmware files
that could be used by this driver. This helps tools like Jockey to
correctly detect and/or install the firmware files relevant to
this driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 494017e4fcc9..9e268b6240fb 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -61,6 +61,8 @@ MODULE_AUTHOR("Michael Buesch");
 MODULE_LICENSE("GPL");
 
 MODULE_FIRMWARE(B43legacy_SUPPORTED_FIRMWARE_ID);
+MODULE_FIRMWARE("b43legacy/ucode2.fw");
+MODULE_FIRMWARE("b43legacy/ucode4.fw");
 
 #if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
 static int modparam_pio;
-- 
cgit v1.2.3


From ececeecee8c60be96368bcc416057f38822012df Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Tue, 12 Jan 2010 18:23:04 -0500
Subject: wl1271: remove unused flags

These are unused and as with a previous patch 5ef5da for wl1251
this removes some other unused flags. the IRQ_MASK specifically
conflicts with include/pcmcia/cs.h when using compat-wireless.

Cc: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_reg.h | 99 --------------------------------
 1 file changed, 99 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h
index 1f237389d1c7..990960771528 100644
--- a/drivers/net/wireless/wl12xx/wl1271_reg.h
+++ b/drivers/net/wireless/wl12xx/wl1271_reg.h
@@ -62,73 +62,10 @@
 #define WL1271_SLV_REG_DATA            (REGISTERS_BASE + 0x0008)
 #define WL1271_SLV_REG_ADATA           (REGISTERS_BASE + 0x000c)
 #define WL1271_SLV_MEM_DATA            (REGISTERS_BASE + 0x0018)
-/*
- * Interrupt registers.
- * 64 bit interrupt sources registers ws ced.
- * sme interupts were removed and new ones were added.
- * Order was changed.
- */
-#define FIQ_MASK                       (REGISTERS_BASE + 0x0400)
-#define FIQ_MASK_L                     (REGISTERS_BASE + 0x0400)
-#define FIQ_MASK_H                     (REGISTERS_BASE + 0x0404)
-#define FIQ_MASK_SET                   (REGISTERS_BASE + 0x0408)
-#define FIQ_MASK_SET_L                 (REGISTERS_BASE + 0x0408)
-#define FIQ_MASK_SET_H                 (REGISTERS_BASE + 0x040C)
-#define FIQ_MASK_CLR                   (REGISTERS_BASE + 0x0410)
-#define FIQ_MASK_CLR_L                 (REGISTERS_BASE + 0x0410)
-#define FIQ_MASK_CLR_H                 (REGISTERS_BASE + 0x0414)
-#define IRQ_MASK                       (REGISTERS_BASE + 0x0418)
-#define IRQ_MASK_L                     (REGISTERS_BASE + 0x0418)
-#define IRQ_MASK_H                     (REGISTERS_BASE + 0x041C)
-#define IRQ_MASK_SET                   (REGISTERS_BASE + 0x0420)
-#define IRQ_MASK_SET_L                 (REGISTERS_BASE + 0x0420)
-#define IRQ_MASK_SET_H                 (REGISTERS_BASE + 0x0424)
-#define IRQ_MASK_CLR                   (REGISTERS_BASE + 0x0428)
-#define IRQ_MASK_CLR_L                 (REGISTERS_BASE + 0x0428)
-#define IRQ_MASK_CLR_H                 (REGISTERS_BASE + 0x042C)
-#define ECPU_MASK                      (REGISTERS_BASE + 0x0448)
-#define FIQ_STS_L                      (REGISTERS_BASE + 0x044C)
-#define FIQ_STS_H                      (REGISTERS_BASE + 0x0450)
-#define IRQ_STS_L                      (REGISTERS_BASE + 0x0454)
-#define IRQ_STS_H                      (REGISTERS_BASE + 0x0458)
-#define INT_STS_ND                     (REGISTERS_BASE + 0x0464)
-#define INT_STS_RAW_L                  (REGISTERS_BASE + 0x0464)
-#define INT_STS_RAW_H                  (REGISTERS_BASE + 0x0468)
-#define INT_STS_CLR                    (REGISTERS_BASE + 0x04B4)
-#define INT_STS_CLR_L                  (REGISTERS_BASE + 0x04B4)
-#define INT_STS_CLR_H                  (REGISTERS_BASE + 0x04B8)
-#define INT_ACK                        (REGISTERS_BASE + 0x046C)
-#define INT_ACK_L                      (REGISTERS_BASE + 0x046C)
-#define INT_ACK_H                      (REGISTERS_BASE + 0x0470)
-#define INT_TRIG                       (REGISTERS_BASE + 0x0474)
-#define INT_TRIG_L                     (REGISTERS_BASE + 0x0474)
-#define INT_TRIG_H                     (REGISTERS_BASE + 0x0478)
-#define HOST_STS_L                     (REGISTERS_BASE + 0x045C)
-#define HOST_STS_H                     (REGISTERS_BASE + 0x0460)
-#define HOST_MASK                      (REGISTERS_BASE + 0x0430)
-#define HOST_MASK_L                    (REGISTERS_BASE + 0x0430)
-#define HOST_MASK_H                    (REGISTERS_BASE + 0x0434)
-#define HOST_MASK_SET                  (REGISTERS_BASE + 0x0438)
-#define HOST_MASK_SET_L                (REGISTERS_BASE + 0x0438)
-#define HOST_MASK_SET_H                (REGISTERS_BASE + 0x043C)
-#define HOST_MASK_CLR                  (REGISTERS_BASE + 0x0440)
-#define HOST_MASK_CLR_L                (REGISTERS_BASE + 0x0440)
-#define HOST_MASK_CLR_H                (REGISTERS_BASE + 0x0444)
 
 #define ACX_REG_INTERRUPT_TRIG         (REGISTERS_BASE + 0x0474)
 #define ACX_REG_INTERRUPT_TRIG_H       (REGISTERS_BASE + 0x0478)
 
-/* Host Interrupts*/
-#define HINT_MASK                      (REGISTERS_BASE + 0x0494)
-#define HINT_MASK_SET                  (REGISTERS_BASE + 0x0498)
-#define HINT_MASK_CLR                  (REGISTERS_BASE + 0x049C)
-#define HINT_STS_ND_MASKED             (REGISTERS_BASE + 0x04A0)
-/*1150 spec calls this HINT_STS_RAW*/
-#define HINT_STS_ND		       (REGISTERS_BASE + 0x04B0)
-#define HINT_STS_CLR                   (REGISTERS_BASE + 0x04A4)
-#define HINT_ACK                       (REGISTERS_BASE + 0x04A8)
-#define HINT_TRIG                      (REGISTERS_BASE + 0x04AC)
-
 /*=============================================
   Host Interrupt Mask Register - 32bit (RW)
   ------------------------------------------
@@ -432,16 +369,6 @@
 				      | CFG_RX_PRSP_EN)
 
 
-/*===============================================
-  Phy regs
- ===============================================*/
-#define ACX_PHY_ADDR_REG                SBB_ADDR
-#define ACX_PHY_DATA_REG                SBB_DATA
-#define ACX_PHY_CTRL_REG                SBB_CTL
-#define ACX_PHY_REG_WR_MASK             0x00000001ul
-#define ACX_PHY_REG_RD_MASK             0x00000002ul
-
-
 /*===============================================
  EEPROM Read/Write Request 32bit RW
  ------------------------------------------
@@ -511,28 +438,6 @@
 #define ACX_CONT_WIND_MIN_MASK   0x0000007f
 #define ACX_CONT_WIND_MAX        0x03ff0000
 
-/*
- * Indirect slave register/memory registers
- * ----------------------------------------
- */
-#define HW_SLAVE_REG_ADDR_REG		0x00000004
-#define HW_SLAVE_REG_DATA_REG		0x00000008
-#define HW_SLAVE_REG_CTRL_REG		0x0000000c
-
-#define SLAVE_AUTO_INC				0x00010000
-#define SLAVE_NO_AUTO_INC			0x00000000
-#define SLAVE_HOST_LITTLE_ENDIAN	0x00000000
-
-#define HW_SLAVE_MEM_ADDR_REG		SLV_MEM_ADDR
-#define HW_SLAVE_MEM_DATA_REG		SLV_MEM_DATA
-#define HW_SLAVE_MEM_CTRL_REG		SLV_MEM_CTL
-#define HW_SLAVE_MEM_ENDIAN_REG		SLV_END_CTL
-
-#define HW_FUNC_EVENT_INT_EN		0x8000
-#define HW_FUNC_EVENT_MASK_REG		0x00000034
-
-#define ACX_MAC_TIMESTAMP_REG	(MAC_TIMESTAMP)
-
 /*===============================================
   HI_CFG Interface Configuration Register Values
   ------------------------------------------
@@ -647,10 +552,6 @@ b12-b0 - Supported Rate indicator bits as defined below.
 ******************************************************************************/
 
 
-#define TNETW1251_CHIP_ID_PG1_0         0x07010101
-#define TNETW1251_CHIP_ID_PG1_1         0x07020101
-#define TNETW1251_CHIP_ID_PG1_2	        0x07030101
-
 /*************************************************************************
 
     Interrupt Trigger Register (Host -> WiLink)
-- 
cgit v1.2.3


From 2f1f00fc9b477481ad5c63976385c345851fee3d Mon Sep 17 00:00:00 2001
From: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Date: Wed, 13 Jan 2010 14:36:24 +0100
Subject: Remove config option B43_LEGACY_RFKILL completely

In f41f3f373dd72344c65d801d6381fe83ef3a2c54 the B43 driver was ported
to use the cfg80211 API for rfkill and consequently the config option
was dropped (RFKILL is now unconditionally enabled).

However in the Kernel Info the feature is still checked and reported
missing. This patch just removes the conditional and the relevant code
blocks while still reporting that feature unconditionally would be
another option (it's always there).

Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/main.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 9e268b6240fb..174ac6bde2b1 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3962,7 +3962,7 @@ static struct ssb_driver b43legacy_ssb_driver = {
 
 static void b43legacy_print_driverinfo(void)
 {
-	const char *feat_pci = "", *feat_leds = "", *feat_rfkill = "",
+	const char *feat_pci = "", *feat_leds = "",
 		   *feat_pio = "", *feat_dma = "";
 
 #ifdef CONFIG_B43LEGACY_PCI_AUTOSELECT
@@ -3971,9 +3971,6 @@ static void b43legacy_print_driverinfo(void)
 #ifdef CONFIG_B43LEGACY_LEDS
 	feat_leds = "L";
 #endif
-#ifdef CONFIG_B43LEGACY_RFKILL
-	feat_rfkill = "R";
-#endif
 #ifdef CONFIG_B43LEGACY_PIO
 	feat_pio = "I";
 #endif
@@ -3981,9 +3978,9 @@ static void b43legacy_print_driverinfo(void)
 	feat_dma = "D";
 #endif
 	printk(KERN_INFO "Broadcom 43xx-legacy driver loaded "
-	       "[ Features: %s%s%s%s%s, Firmware-ID: "
+	       "[ Features: %s%s%s%s, Firmware-ID: "
 	       B43legacy_SUPPORTED_FIRMWARE_ID " ]\n",
-	       feat_pci, feat_leds, feat_rfkill, feat_pio, feat_dma);
+	       feat_pci, feat_leds, feat_pio, feat_dma);
 }
 
 static int __init b43legacy_init(void)
-- 
cgit v1.2.3


From 5e4ea1f0ed256382d6d839fbd7a5c7f1b99b6cb0 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Thu, 14 Jan 2010 10:20:57 +0530
Subject: ath9k: Fix panic on driver load

The device has to be marked as invalid before
registering the ISR. HW initialization takes place
after the ISR has been registered, and the invalid
flag is eventually cleared in the ->stop() callback.

Reported-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ahb.c  | 3 +++
 drivers/net/wireless/ath/ath9k/init.c | 2 --
 drivers/net/wireless/ath/ath9k/pci.c  | 3 +++
 3 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index f24b1f4c3e29..9e62a569e816 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -121,6 +121,9 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	sc->mem = mem;
 	sc->irq = irq;
 
+	/* Will be cleared in ath9k_start() */
+	sc->sc_flags |= SC_OP_INVALID;
+
 	ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 16d1efb4b8b2..5f78d7a5ff22 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -534,8 +534,6 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	int ret = 0, i;
 	int csz = 0;
 
-	sc->sc_flags |= SC_OP_INVALID;
-
 	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
 	if (!ah)
 		return -ENOMEM;
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 95b9a07597ef..4ae7b5f12029 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -198,6 +198,9 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->dev = &pdev->dev;
 	sc->mem = mem;
 
+	/* Will be cleared in ath9k_start() */
+	sc->sc_flags |= SC_OP_INVALID;
+
 	ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
-- 
cgit v1.2.3


From a03d2451998e09e87eb573a9e04cc41fde2bb77f Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Thu, 14 Jan 2010 01:53:21 +0000
Subject: netxen: fix endianness read mac address

In netxen_read_mac_addr, mac_addr should be declared
u64 instead of __le64, used by host only.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h      | 4 ++--
 drivers/net/netxen/netxen_nic_hw.c   | 4 ++--
 drivers/net/netxen/netxen_nic_main.c | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 8264ae0cbf1d..1e9c8fa46c71 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1427,8 +1427,8 @@ static inline u32 netxen_tx_avail(struct nx_host_tx_ring *tx_ring)
 
 }
 
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
-int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, u64 *mac);
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, u64 *mac);
 extern void netxen_change_ringparam(struct netxen_adapter *adapter);
 extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
 				int *valp);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 85e28e60ecf1..0db36f190ba2 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1033,7 +1033,7 @@ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 	return 0;
 }
 
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, u64 *mac)
 {
 	__le32 *pmac = (__le32 *) mac;
 	u32 offset;
@@ -1058,7 +1058,7 @@ int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 	return 0;
 }
 
-int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, u64 *mac)
 {
 	uint32_t crbaddr, mac_hi, mac_lo;
 	int pci_func = adapter->ahw.pci_func;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index def4a07357d6..b69cb3c7dfb6 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -432,7 +432,7 @@ netxen_read_mac_addr(struct netxen_adapter *adapter)
 {
 	int i;
 	unsigned char *p;
-	__le64 mac_addr;
+	u64 mac_addr;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 
-- 
cgit v1.2.3


From c070395009e1e153395837cd256dffc931dd6f98 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Thu, 14 Jan 2010 01:53:22 +0000
Subject: netxen: fix endianness intr coalesce

Before sending Interrupt coalesce parameters to device,
convert them in little endian.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_hw.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 0db36f190ba2..9548e5967399 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -777,17 +777,20 @@ int netxen_p3_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
 {
 	nx_nic_req_t req;
-	u64 word;
-	int rv;
+	u64 word[6];
+	int rv, i;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
+	memset(word, 0, sizeof(word));
 
 	req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
 
-	word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
-	req.req_hdr = cpu_to_le64(word);
+	word[0] = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word[0]);
 
-	memcpy(&req.words[0], &adapter->coal, sizeof(adapter->coal));
+	memcpy(&word[0], &adapter->coal, sizeof(adapter->coal));
+	for (i = 0; i < 6; i++)
+		req.words[i] = cpu_to_le64(word[i]);
 
 	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0) {
-- 
cgit v1.2.3


From 4d21fef426c5cbbdf6da607de4c0adcaa3d4bbb0 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Thu, 14 Jan 2010 01:53:23 +0000
Subject: netxen: fix license header

GNU General Public License is in file "COPYING".

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/Makefile             | 2 +-
 drivers/net/netxen/netxen_nic.h         | 2 +-
 drivers/net/netxen/netxen_nic_ctx.c     | 2 +-
 drivers/net/netxen/netxen_nic_ethtool.c | 2 +-
 drivers/net/netxen/netxen_nic_hdr.h     | 2 +-
 drivers/net/netxen/netxen_nic_hw.c      | 2 +-
 drivers/net/netxen/netxen_nic_hw.h      | 2 +-
 drivers/net/netxen/netxen_nic_init.c    | 2 +-
 drivers/net/netxen/netxen_nic_main.c    | 2 +-
 9 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/Makefile b/drivers/net/netxen/Makefile
index 11d94e2434e4..861a0590b1f4 100644
--- a/drivers/net/netxen/Makefile
+++ b/drivers/net/netxen/Makefile
@@ -18,7 +18,7 @@
 # MA  02111-1307, USA.
 # 
 # The full GNU General Public License is included in this distribution
-# in the file called LICENSE.
+# in the file called "COPYING".
 # 
 #
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 1e9c8fa46c71..144d2e880422 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 9cb8f6878047..2a8ef5fc9663 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 542f408333ff..f8499e56cbee 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 638369024908..622e4c8be937 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 9548e5967399..dd45c7a9122e 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 3fd1dcb3583a..e2c5b6f2df03 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 333bd325f58e..1c63610ead42 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index b69cb3c7dfb6..e5bdd4de7731 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -19,7 +19,7 @@
  * MA  02111-1307, USA.
  *
  * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
+ * in the file called "COPYING".
  *
  */
 
-- 
cgit v1.2.3


From 1954dc11776ef8c06263ba4cd21bf4d25c79a19c Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Thu, 14 Jan 2010 01:53:24 +0000
Subject: netxen: fix sparse warning

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index e5bdd4de7731..076f826d5a50 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -2596,7 +2596,7 @@ netxen_sysfs_read_mem(struct kobject *kobj, struct bin_attribute *attr,
 	return size;
 }
 
-ssize_t netxen_sysfs_write_mem(struct kobject *kobj,
+static ssize_t netxen_sysfs_write_mem(struct kobject *kobj,
 		struct bin_attribute *attr, char *buf,
 		loff_t offset, size_t size)
 {
-- 
cgit v1.2.3


From ad72c347e56bf3a0231b9d686e17764157d2961c Mon Sep 17 00:00:00 2001
From: Christian Pellegrin <chripell@fsfe.org>
Date: Thu, 14 Jan 2010 07:08:34 +0000
Subject: can: Proper ctrlmode handling for CAN devices

This patch adds error checking of ctrlmode values for CAN devices. As
an example all availabe bits are implemented in the mcp251x driver.

Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/at91_can.c        |  1 +
 drivers/net/can/bfin_can.c        |  1 +
 drivers/net/can/dev.c             |  2 ++
 drivers/net/can/mcp251x.c         | 11 ++++++++++-
 drivers/net/can/mscan/mscan.c     |  1 +
 drivers/net/can/sja1000/sja1000.c |  1 +
 drivers/net/can/ti_hecc.c         |  1 +
 drivers/net/can/usb/ems_usb.c     |  1 +
 include/linux/can/dev.h           |  1 +
 9 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f7287497ba6e..a2f29a38798a 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1073,6 +1073,7 @@ static int __init at91_can_probe(struct platform_device *pdev)
 	priv->can.bittiming_const = &at91_bittiming_const;
 	priv->can.do_set_bittiming = at91_set_bittiming;
 	priv->can.do_set_mode = at91_set_mode;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 	priv->reg_base = addr;
 	priv->dev = dev;
 	priv->clk = clk;
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index 7e1926e79e98..bf7f9ba2d903 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -603,6 +603,7 @@ struct net_device *alloc_bfin_candev(void)
 	priv->can.bittiming_const = &bfin_can_bittiming_const;
 	priv->can.do_set_bittiming = bfin_can_set_bittiming;
 	priv->can.do_set_mode = bfin_can_set_mode;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 
 	return dev;
 }
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index c1bb29f0322b..f08f1202ff00 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -592,6 +592,8 @@ static int can_changelink(struct net_device *dev,
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
 		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+		if (cm->flags & ~priv->ctrlmode_supported)
+			return -EOPNOTSUPP;
 		priv->ctrlmode &= ~cm->mask;
 		priv->ctrlmode |= cm->flags;
 	}
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index afa2fa45fed9..bbe186b5a0ed 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -539,9 +539,14 @@ static void mcp251x_set_normal_mode(struct spi_device *spi)
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
 		/* Put device into loopback mode */
 		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK);
+	} else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
+		/* Put device into listen-only mode */
+		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LISTEN_ONLY);
 	} else {
 		/* Put device into normal mode */
-		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
+		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL |
+				  (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT ?
+				   CANCTRL_OSM : 0));
 
 		/* Wait for the device to enter normal mode */
 		timeout = jiffies + HZ;
@@ -948,6 +953,10 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
 	priv->can.bittiming_const = &mcp251x_bittiming_const;
 	priv->can.do_set_mode = mcp251x_do_set_mode;
 	priv->can.clock.freq = pdata->oscillator_frequency / 2;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
+		CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
+	if (pdata->model == CAN_MCP251X_MCP2515)
+		priv->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
 	priv->net = net;
 	dev_set_drvdata(&spi->dev, priv);
 
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 40827c128b65..6b7dd578d417 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -686,6 +686,7 @@ struct net_device *alloc_mscandev(void)
 	priv->can.bittiming_const = &mscan_bittiming_const;
 	priv->can.do_set_bittiming = mscan_do_set_bittiming;
 	priv->can.do_set_mode = mscan_do_set_mode;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 
 	for (i = 0; i < TX_QUEUE_SIZE; i++) {
 		priv->tx_queue[i].id = i;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 345304d779b9..ace103a44833 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -567,6 +567,7 @@ struct net_device *alloc_sja1000dev(int sizeof_priv)
 	priv->can.bittiming_const = &sja1000_bittiming_const;
 	priv->can.do_set_bittiming = sja1000_set_bittiming;
 	priv->can.do_set_mode = sja1000_set_mode;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 
 	if (sizeof_priv)
 		priv->priv = (void *)priv + sizeof(struct sja1000_priv);
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 7d370e32a7a8..8332e242b0be 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -909,6 +909,7 @@ static int ti_hecc_probe(struct platform_device *pdev)
 	priv->can.bittiming_const = &ti_hecc_bittiming_const;
 	priv->can.do_set_mode = ti_hecc_do_set_mode;
 	priv->can.do_get_state = ti_hecc_get_state;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 
 	ndev->irq = irq->start;
 	ndev->flags |= IFF_ECHO;
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index ddb17e256656..bfab283ba9b1 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -1022,6 +1022,7 @@ static int ems_usb_probe(struct usb_interface *intf,
 	dev->can.bittiming_const = &ems_usb_bittiming_const;
 	dev->can.do_set_bittiming = ems_usb_set_bittiming;
 	dev->can.do_set_mode = ems_usb_set_mode;
+	dev->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 
 	netdev->flags |= IFF_ECHO; /* we support local echo */
 
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 7e7c98a3e908..c8c660a79f90 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -38,6 +38,7 @@ struct can_priv {
 
 	enum can_state state;
 	u32 ctrlmode;
+	u32 ctrlmode_supported;
 
 	int restart_ms;
 	struct timer_list restart_timer;
-- 
cgit v1.2.3


From 05c2828c72c4eabf62376adfe27bd24797621f62 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Thu, 14 Jan 2010 06:17:09 +0000
Subject: tun: export underlying socket

Tun device looks similar to a packet socket
in that both pass complete frames from/to userspace.

This patch fills in enough fields in the socket underlying tun driver
to support sendmsg/recvmsg operations, and message flags
MSG_TRUNC and MSG_DONTWAIT, and exports access to this socket
to modules.  Regular read/write behaviour is unchanged.

This way, code using raw sockets to inject packets
into a physical device, can support injecting
packets into host network stack almost without modification.

First user of this interface will be vhost virtualization
accelerator.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c      | 101 +++++++++++++++++++++++++++++++++++++++----------
 include/linux/if_tun.h |  14 +++++++
 2 files changed, 96 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 2834a01bae24..5adb3d150552 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -144,6 +144,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file)
 	err = 0;
 	tfile->tun = tun;
 	tun->tfile = tfile;
+	tun->socket.file = file;
 	dev_hold(tun->dev);
 	sock_hold(tun->socket.sk);
 	atomic_inc(&tfile->count);
@@ -158,6 +159,7 @@ static void __tun_detach(struct tun_struct *tun)
 	/* Detach from net device */
 	netif_tx_lock_bh(tun->dev);
 	tun->tfile = NULL;
+	tun->socket.file = NULL;
 	netif_tx_unlock_bh(tun->dev);
 
 	/* Drop read queue */
@@ -387,7 +389,8 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Notify and wake up reader process */
 	if (tun->flags & TUN_FASYNC)
 		kill_fasync(&tun->fasync, SIGIO, POLL_IN);
-	wake_up_interruptible(&tun->socket.wait);
+	wake_up_interruptible_poll(&tun->socket.wait, POLLIN |
+				   POLLRDNORM | POLLRDBAND);
 	return NETDEV_TX_OK;
 
 drop:
@@ -743,7 +746,7 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 	len = min_t(int, skb->len, len);
 
 	skb_copy_datagram_const_iovec(skb, 0, iv, total, len);
-	total += len;
+	total += skb->len;
 
 	tun->dev->stats.tx_packets++;
 	tun->dev->stats.tx_bytes += len;
@@ -751,34 +754,23 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 	return total;
 }
 
-static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
-			    unsigned long count, loff_t pos)
+static ssize_t tun_do_read(struct tun_struct *tun,
+			   struct kiocb *iocb, const struct iovec *iv,
+			   ssize_t len, int noblock)
 {
-	struct file *file = iocb->ki_filp;
-	struct tun_file *tfile = file->private_data;
-	struct tun_struct *tun = __tun_get(tfile);
 	DECLARE_WAITQUEUE(wait, current);
 	struct sk_buff *skb;
-	ssize_t len, ret = 0;
-
-	if (!tun)
-		return -EBADFD;
+	ssize_t ret = 0;
 
 	DBG(KERN_INFO "%s: tun_chr_read\n", tun->dev->name);
 
-	len = iov_length(iv, count);
-	if (len < 0) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	add_wait_queue(&tun->socket.wait, &wait);
 	while (len) {
 		current->state = TASK_INTERRUPTIBLE;
 
 		/* Read frames from the queue */
 		if (!(skb=skb_dequeue(&tun->socket.sk->sk_receive_queue))) {
-			if (file->f_flags & O_NONBLOCK) {
+			if (noblock) {
 				ret = -EAGAIN;
 				break;
 			}
@@ -805,6 +797,27 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&tun->socket.wait, &wait);
 
+	return ret;
+}
+
+static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
+			    unsigned long count, loff_t pos)
+{
+	struct file *file = iocb->ki_filp;
+	struct tun_file *tfile = file->private_data;
+	struct tun_struct *tun = __tun_get(tfile);
+	ssize_t len, ret;
+
+	if (!tun)
+		return -EBADFD;
+	len = iov_length(iv, count);
+	if (len < 0) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = tun_do_read(tun, iocb, iv, len, file->f_flags & O_NONBLOCK);
+	ret = min_t(ssize_t, ret, len);
 out:
 	tun_put(tun);
 	return ret;
@@ -847,7 +860,8 @@ static void tun_sock_write_space(struct sock *sk)
 		return;
 
 	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
-		wake_up_interruptible_sync(sk->sk_sleep);
+		wake_up_interruptible_sync_poll(sk->sk_sleep, POLLOUT |
+						POLLWRNORM | POLLWRBAND);
 
 	tun = tun_sk(sk)->tun;
 	kill_fasync(&tun->fasync, SIGIO, POLL_OUT);
@@ -858,6 +872,37 @@ static void tun_sock_destruct(struct sock *sk)
 	free_netdev(tun_sk(sk)->tun->dev);
 }
 
+static int tun_sendmsg(struct kiocb *iocb, struct socket *sock,
+		       struct msghdr *m, size_t total_len)
+{
+	struct tun_struct *tun = container_of(sock, struct tun_struct, socket);
+	return tun_get_user(tun, m->msg_iov, total_len,
+			    m->msg_flags & MSG_DONTWAIT);
+}
+
+static int tun_recvmsg(struct kiocb *iocb, struct socket *sock,
+		       struct msghdr *m, size_t total_len,
+		       int flags)
+{
+	struct tun_struct *tun = container_of(sock, struct tun_struct, socket);
+	int ret;
+	if (flags & ~(MSG_DONTWAIT|MSG_TRUNC))
+		return -EINVAL;
+	ret = tun_do_read(tun, iocb, m->msg_iov, total_len,
+			  flags & MSG_DONTWAIT);
+	if (ret > total_len) {
+		m->msg_flags |= MSG_TRUNC;
+		ret = flags & MSG_TRUNC ? ret : total_len;
+	}
+	return ret;
+}
+
+/* Ops structure to mimic raw sockets with tun */
+static const struct proto_ops tun_socket_ops = {
+	.sendmsg = tun_sendmsg,
+	.recvmsg = tun_recvmsg,
+};
+
 static struct proto tun_proto = {
 	.name		= "tun",
 	.owner		= THIS_MODULE,
@@ -986,6 +1031,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 			goto err_free_dev;
 
 		init_waitqueue_head(&tun->socket.wait);
+		tun->socket.ops = &tun_socket_ops;
 		sock_init_data(&tun->socket, sk);
 		sk->sk_write_space = tun_sock_write_space;
 		sk->sk_sndbuf = INT_MAX;
@@ -1525,6 +1571,23 @@ static void tun_cleanup(void)
 	rtnl_link_unregister(&tun_link_ops);
 }
 
+/* Get an underlying socket object from tun file.  Returns error unless file is
+ * attached to a device.  The returned object works like a packet socket, it
+ * can be used for sock_sendmsg/sock_recvmsg.  The caller is responsible for
+ * holding a reference to the file for as long as the socket is in use. */
+struct socket *tun_get_socket(struct file *file)
+{
+	struct tun_struct *tun;
+	if (file->f_op != &tun_fops)
+		return ERR_PTR(-EINVAL);
+	tun = tun_get(file);
+	if (!tun)
+		return ERR_PTR(-EBADFD);
+	tun_put(tun);
+	return &tun->socket;
+}
+EXPORT_SYMBOL_GPL(tun_get_socket);
+
 module_init(tun_init);
 module_exit(tun_cleanup);
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 3f5fd523b49d..404abe00162c 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -86,4 +86,18 @@ struct tun_filter {
 	__u8   addr[0][ETH_ALEN];
 };
 
+#ifdef __KERNEL__
+#if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
+struct socket *tun_get_socket(struct file *);
+#else
+#include <linux/err.h>
+#include <linux/errno.h>
+struct file;
+struct socket;
+static inline struct socket *tun_get_socket(struct file *f)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif /* CONFIG_TUN */
+#endif /* __KERNEL__ */
 #endif /* __IF_TUN_H */
-- 
cgit v1.2.3


From c5bab5e94d148aee2c852450374143c89aa56511 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@denx.de>
Date: Thu, 14 Jan 2010 01:05:48 +0000
Subject: can: mscan-mpc5xxx: fix broken support for the MPC5200

Due to an invalid "#ifdef CONFIG_PPC_MPC5200", the real clock setup
function was not called for the MPC5200.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/mscan/mpc5xxx_can.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index f73487f723b8..03e7c48465a2 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -43,7 +43,7 @@ struct mpc5xxx_can_data {
 			 int *mscan_clksrc);
 };
 
-#ifdef CONFIG_PPC_MPC5200
+#ifdef CONFIG_PPC_MPC52xx
 static struct of_device_id __devinitdata mpc52xx_cdm_ids[] = {
 	{ .compatible = "fsl,mpc5200-cdm", },
 	{}
@@ -84,7 +84,7 @@ static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
 	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
 	np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids);
 	if (!np_cdm) {
-		dev_err(&of->dev, "can't get clock node!\n");
+		dev_err(&ofdev->dev, "can't get clock node!\n");
 		return 0;
 	}
 	cdm = of_iomap(np_cdm, 0);
@@ -101,14 +101,14 @@ static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
 
 	return freq;
 }
-#else /* !CONFIG_PPC_MPC5200 */
+#else /* !CONFIG_PPC_MPC52xx */
 static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
 					   const char *clock_name,
 					   int *mscan_clksrc)
 {
 	return 0;
 }
-#endif /* CONFIG_PPC_MPC5200 */
+#endif /* CONFIG_PPC_MPC52xx */
 
 #ifdef CONFIG_PPC_MPC512x
 struct mpc512x_clockctl {
-- 
cgit v1.2.3


From d86458471aadffe93b741024b5a879ea5dc8df35 Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Fri, 15 Jan 2010 01:48:22 -0800
Subject: ethoc: Use resource_size

Use the resource_size function instead of manually calculating the
resource size.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethoc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index bd1db92aec1b..f9d5ca078743 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -904,7 +904,7 @@ static int ethoc_probe(struct platform_device *pdev)
 	}
 
 	mmio = devm_request_mem_region(&pdev->dev, res->start,
-			res->end - res->start + 1, res->name);
+			resource_size(res), res->name);
 	if (!mmio) {
 		dev_err(&pdev->dev, "cannot request I/O memory space\n");
 		ret = -ENXIO;
@@ -917,7 +917,7 @@ static int ethoc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (res) {
 		mem = devm_request_mem_region(&pdev->dev, res->start,
-			res->end - res->start + 1, res->name);
+			resource_size(res), res->name);
 		if (!mem) {
 			dev_err(&pdev->dev, "cannot request memory space\n");
 			ret = -ENXIO;
@@ -945,7 +945,7 @@ static int ethoc_probe(struct platform_device *pdev)
 	priv->dma_alloc = 0;
 
 	priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr,
-			mmio->end - mmio->start + 1);
+			resource_size(mmio));
 	if (!priv->iobase) {
 		dev_err(&pdev->dev, "cannot remap I/O memory space\n");
 		ret = -ENXIO;
@@ -954,7 +954,7 @@ static int ethoc_probe(struct platform_device *pdev)
 
 	if (netdev->mem_end) {
 		priv->membase = devm_ioremap_nocache(&pdev->dev,
-			netdev->mem_start, mem->end - mem->start + 1);
+			netdev->mem_start, resource_size(mem));
 		if (!priv->membase) {
 			dev_err(&pdev->dev, "cannot remap memory space\n");
 			ret = -ENXIO;
-- 
cgit v1.2.3


From 0005baf4a31efe6de6f922f73ccbd3762a110062 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jan 2010 02:33:40 +0100
Subject: ath9k: cleanup slot time and ack/cts timeout handling

Previously ath9k left the initialization of slot timing and ACK/CTS
timeout to the mode specific initvals. This does not handle short vs
long slot in 2.4 GHz and uses a rather strange value for the 2.4 GHz
ACK timeout (64 usec).
This patch uses the proper ath9k_hw functions for setting slot time and
timeouts and also implements the switch between short and long slot
time in 2.4 GHz

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c |   3 +-
 drivers/net/wireless/ath/ath9k/hw.c     | 103 ++++++++++----------------------
 drivers/net/wireless/ath/ath9k/hw.h     |   4 +-
 drivers/net/wireless/ath/ath9k/main.c   |  20 +++++++
 4 files changed, 55 insertions(+), 75 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 1660ef17aaf5..422454fe4ff0 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -480,7 +480,8 @@ void ath_beacon_tasklet(unsigned long data)
 		sc->beacon.updateslot = COMMIT; /* commit next beacon */
 		sc->beacon.slotupdate = slot;
 	} else if (sc->beacon.updateslot == COMMIT && sc->beacon.slotupdate == slot) {
-		ath9k_hw_setslottime(sc->sc_ah, sc->beacon.slottime);
+		ah->slottime = sc->beacon.slottime;
+		ath9k_hw_init_global_settings(ah);
 		sc->beacon.updateslot = OK;
 	}
 	if (bfaddr != 0) {
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2311fe7a0bf2..e1fd4cc9fae2 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -52,28 +52,6 @@ module_exit(ath9k_exit);
 /* Helper Functions */
 /********************/
 
-static u32 ath9k_hw_mac_usec(struct ath_hw *ah, u32 clks)
-{
-	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
-
-	if (!ah->curchan) /* should really check for CCK instead */
-		return clks / ATH9K_CLOCK_RATE_CCK;
-	if (conf->channel->band == IEEE80211_BAND_2GHZ)
-		return clks / ATH9K_CLOCK_RATE_2GHZ_OFDM;
-
-	return clks / ATH9K_CLOCK_RATE_5GHZ_OFDM;
-}
-
-static u32 ath9k_hw_mac_to_usec(struct ath_hw *ah, u32 clks)
-{
-	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
-
-	if (conf_is_ht40(conf))
-		return ath9k_hw_mac_usec(ah, clks) / 2;
-	else
-		return ath9k_hw_mac_usec(ah, clks);
-}
-
 static u32 ath9k_hw_mac_clks(struct ath_hw *ah, u32 usecs)
 {
 	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
@@ -413,8 +391,6 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah)
 	ah->beacon_interval = 100;
 	ah->enable_32kHz_clock = DONT_USE_32KHZ;
 	ah->slottime = (u32) -1;
-	ah->acktimeout = (u32) -1;
-	ah->ctstimeout = (u32) -1;
 	ah->globaltxtimeout = (u32) -1;
 	ah->power_mode = ATH9K_PM_UNDEFINED;
 }
@@ -1180,34 +1156,25 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
 	}
 }
 
-static bool ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
+static void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
 {
-	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
-			  "bad ack timeout %u\n", us);
-		ah->acktimeout = (u32) -1;
-		return false;
-	} else {
-		REG_RMW_FIELD(ah, AR_TIME_OUT,
-			      AR_TIME_OUT_ACK, ath9k_hw_mac_to_clks(ah, us));
-		ah->acktimeout = us;
-		return true;
-	}
+	u32 val = ath9k_hw_mac_to_clks(ah, us);
+	val = min(val, (u32) 0xFFFF);
+	REG_WRITE(ah, AR_D_GBL_IFS_SLOT, val);
 }
 
-static bool ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+static void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
 {
-	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
-			  "bad cts timeout %u\n", us);
-		ah->ctstimeout = (u32) -1;
-		return false;
-	} else {
-		REG_RMW_FIELD(ah, AR_TIME_OUT,
-			      AR_TIME_OUT_CTS, ath9k_hw_mac_to_clks(ah, us));
-		ah->ctstimeout = us;
-		return true;
-	}
+	u32 val = ath9k_hw_mac_to_clks(ah, us);
+	val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_ACK));
+	REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_ACK, val);
+}
+
+static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+{
+	u32 val = ath9k_hw_mac_to_clks(ah, us);
+	val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_CTS));
+	REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_CTS, val);
 }
 
 static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
@@ -1224,23 +1191,32 @@ static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
 	}
 }
 
-static void ath9k_hw_init_user_settings(struct ath_hw *ah)
+void ath9k_hw_init_global_settings(struct ath_hw *ah)
 {
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
+	int acktimeout;
+	int sifstime;
+
 	ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
 		  ah->misc_mode);
 
 	if (ah->misc_mode != 0)
 		REG_WRITE(ah, AR_PCU_MISC,
 			  REG_READ(ah, AR_PCU_MISC) | ah->misc_mode);
-	if (ah->slottime != (u32) -1)
-		ath9k_hw_setslottime(ah, ah->slottime);
-	if (ah->acktimeout != (u32) -1)
-		ath9k_hw_set_ack_timeout(ah, ah->acktimeout);
-	if (ah->ctstimeout != (u32) -1)
-		ath9k_hw_set_cts_timeout(ah, ah->ctstimeout);
+
+	if (conf->channel && conf->channel->band == IEEE80211_BAND_5GHZ)
+		sifstime = 16;
+	else
+		sifstime = 10;
+
+	acktimeout = ah->slottime + sifstime;
+	ath9k_hw_setslottime(ah, ah->slottime);
+	ath9k_hw_set_ack_timeout(ah, acktimeout);
+	ath9k_hw_set_cts_timeout(ah, acktimeout);
 	if (ah->globaltxtimeout != (u32) -1)
 		ath9k_hw_set_global_txtimeout(ah, ah->globaltxtimeout);
 }
+EXPORT_SYMBOL(ath9k_hw_init_global_settings);
 
 void ath9k_hw_deinit(struct ath_hw *ah)
 {
@@ -2061,7 +2037,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
 		ath9k_enable_rfkill(ah);
 
-	ath9k_hw_init_user_settings(ah);
+	ath9k_hw_init_global_settings(ah);
 
 	if (AR_SREV_9287_12_OR_LATER(ah)) {
 		REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
@@ -3658,21 +3634,6 @@ u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp)
 }
 EXPORT_SYMBOL(ath9k_hw_extend_tsf);
 
-bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
-{
-	if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
-			  "bad slot time %u\n", us);
-		ah->slottime = (u32) -1;
-		return false;
-	} else {
-		REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath9k_hw_mac_to_clks(ah, us));
-		ah->slottime = us;
-		return true;
-	}
-}
-EXPORT_SYMBOL(ath9k_hw_setslottime);
-
 void ath9k_hw_set11nmac2040(struct ath_hw *ah)
 {
 	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 3f0f055ea39b..a7ff07537bc4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -553,8 +553,6 @@ struct ath_hw {
 	int16_t txpower_indexoffset;
 	u32 beacon_interval;
 	u32 slottime;
-	u32 acktimeout;
-	u32 ctstimeout;
 	u32 globaltxtimeout;
 
 	/* ANI */
@@ -668,7 +666,7 @@ void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64);
 void ath9k_hw_reset_tsf(struct ath_hw *ah);
 void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
 u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp);
-bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
+void ath9k_hw_init_global_settings(struct ath_hw *ah);
 void ath9k_hw_set11nmac2040(struct ath_hw *ah);
 void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
 void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b39c7bc41143..580ecca0182c 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1789,6 +1789,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_vif *avp = (void *)vif->drv_priv;
+	int slottime;
 	int error;
 
 	mutex_lock(&sc->mutex);
@@ -1824,6 +1825,25 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 			ath_beacon_config(sc, vif);
 	}
 
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		if (bss_conf->use_short_slot)
+			slottime = 9;
+		else
+			slottime = 20;
+		if (vif->type == NL80211_IFTYPE_AP) {
+			/*
+			 * Defer update, so that connected stations can adjust
+			 * their settings at the same time.
+			 * See beacon.c for more details
+			 */
+			sc->beacon.slottime = slottime;
+			sc->beacon.updateslot = UPDATE;
+		} else {
+			ah->slottime = slottime;
+			ath9k_hw_init_global_settings(ah);
+		}
+	}
+
 	/* Disable transmission of beacons */
 	if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-- 
cgit v1.2.3


From e239d8591843945630521ec85edca08289f1a751 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jan 2010 02:34:58 +0100
Subject: ath9k: implement coverage class support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c   |  7 +++++--
 drivers/net/wireless/ath/ath9k/hw.h   |  1 +
 drivers/net/wireless/ath/ath9k/main.c | 13 +++++++++++++
 3 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e1fd4cc9fae2..0b1dd10f1d84 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1195,6 +1195,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
 {
 	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	int acktimeout;
+	int slottime;
 	int sifstime;
 
 	ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
@@ -1209,8 +1210,10 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
 	else
 		sifstime = 10;
 
-	acktimeout = ah->slottime + sifstime;
-	ath9k_hw_setslottime(ah, ah->slottime);
+	/* As defined by IEEE 802.11-2007 17.3.8.6 */
+	slottime = ah->slottime + 3 * ah->coverage_class;
+	acktimeout = slottime + sifstime;
+	ath9k_hw_setslottime(ah, slottime);
 	ath9k_hw_set_ack_timeout(ah, acktimeout);
 	ath9k_hw_set_cts_timeout(ah, acktimeout);
 	if (ah->globaltxtimeout != (u32) -1)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index a7ff07537bc4..ab1f1981d857 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -551,6 +551,7 @@ struct ath_hw {
 	u32 *bank6Temp;
 
 	int16_t txpower_indexoffset;
+	int coverage_class;
 	u32 beacon_interval;
 	u32 slottime;
 	u32 globaltxtimeout;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 580ecca0182c..c0c571c2e8c4 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2014,6 +2014,18 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 	mutex_unlock(&sc->mutex);
 }
 
+static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
+{
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+
+	mutex_lock(&sc->mutex);
+	ah->coverage_class = coverage_class;
+	ath9k_hw_init_global_settings(ah);
+	mutex_unlock(&sc->mutex);
+}
+
 struct ieee80211_ops ath9k_ops = {
 	.tx 		    = ath9k_tx,
 	.start 		    = ath9k_start,
@@ -2033,4 +2045,5 @@ struct ieee80211_ops ath9k_ops = {
 	.sw_scan_start      = ath9k_sw_scan_start,
 	.sw_scan_complete   = ath9k_sw_scan_complete,
 	.rfkill_poll        = ath9k_rfkill_poll_state,
+	.set_coverage_class = ath9k_set_coverage_class,
 };
-- 
cgit v1.2.3


From 857c0fc490d8474d1a232d9b6568a4b229634bcd Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:01:49 +0100
Subject: b43: use standard fls for finding the most significant bit
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_lp.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index eb4fb4581edb..b58d6cf26580 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -1710,19 +1710,6 @@ static const struct lpphy_rx_iq_comp lpphy_rev2plus_iq_comp = {
 	.c0 = 0,
 };
 
-static u8 lpphy_nbits(s32 val)
-{
-	u32 tmp = abs(val);
-	u8 nbits = 0;
-
-	while (tmp != 0) {
-		nbits++;
-		tmp >>= 1;
-	}
-
-	return nbits;
-}
-
 static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples)
 {
 	struct lpphy_iq_est iq_est;
@@ -1749,8 +1736,8 @@ static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples)
 		goto out;
 	}
 
-	prod_msb = lpphy_nbits(prod);
-	q_msb = lpphy_nbits(qpwr);
+	prod_msb = fls(abs(prod));
+	q_msb = fls(abs(qpwr));
 	tmp1 = prod_msb - 20;
 
 	if (tmp1 >= 0) {
-- 
cgit v1.2.3


From 003d6d2792bebb2b66966ce5f1da11849e855180 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:10:53 +0100
Subject: b43: add new SSB's core id for BCM4328
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Following line shows my BCM4328 detected on SSB. We didn't include 0x0C rev.
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor 0x4243)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 881afff86bd3..c238468bca7f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -118,6 +118,7 @@ static const struct ssb_device_id b43_ssb_tbl[] = {
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 12),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16),
-- 
cgit v1.2.3


From 4772ae107c42cdce1d3864d8d540ea0401eb09d6 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:18:21 +0100
Subject: b43: N-PHY: clean table init, check PHY rev
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Move table init to tables_nphy.c, detect newer PHY which use different init.
We don't init newer PHYs yet but this at least shows what more is needed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       |  38 +++----------
 drivers/net/wireless/b43/tables_nphy.c | 100 ++++++++++++++++++++++++---------
 drivers/net/wireless/b43/tables_nphy.h |  29 +---------
 3 files changed, 84 insertions(+), 83 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 992318a78077..6b995b92af7a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -203,38 +203,16 @@ void b43_nphy_radio_turn_off(struct b43_wldev *dev)
 			b43_ntab_write(dev, (offset) + i, (data)[i]);	\
 	} while (0)
 
-/* Upload the N-PHY tables. */
+/*
+ * Upload the N-PHY tables.
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
+ */
 static void b43_nphy_tables_init(struct b43_wldev *dev)
 {
-	/* Static tables */
-	ntab_upload(dev, B43_NTAB_FRAMESTRUCT, b43_ntab_framestruct);
-	ntab_upload(dev, B43_NTAB_FRAMELT, b43_ntab_framelookup);
-	ntab_upload(dev, B43_NTAB_TMAP, b43_ntab_tmap);
-	ntab_upload(dev, B43_NTAB_TDTRN, b43_ntab_tdtrn);
-	ntab_upload(dev, B43_NTAB_INTLEVEL, b43_ntab_intlevel);
-	ntab_upload(dev, B43_NTAB_PILOT, b43_ntab_pilot);
-	ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt);
-	ntab_upload(dev, B43_NTAB_TDI20A0, b43_ntab_tdi20a0);
-	ntab_upload(dev, B43_NTAB_TDI20A1, b43_ntab_tdi20a1);
-	ntab_upload(dev, B43_NTAB_TDI40A0, b43_ntab_tdi40a0);
-	ntab_upload(dev, B43_NTAB_TDI40A1, b43_ntab_tdi40a1);
-	ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi);
-	ntab_upload(dev, B43_NTAB_CHANEST, b43_ntab_channelest);
-	ntab_upload(dev, B43_NTAB_MCS, b43_ntab_mcs);
-
-	/* Volatile tables */
-	ntab_upload(dev, B43_NTAB_NOISEVAR10, b43_ntab_noisevar10);
-	ntab_upload(dev, B43_NTAB_NOISEVAR11, b43_ntab_noisevar11);
-	ntab_upload(dev, B43_NTAB_C0_ESTPLT, b43_ntab_estimatepowerlt0);
-	ntab_upload(dev, B43_NTAB_C1_ESTPLT, b43_ntab_estimatepowerlt1);
-	ntab_upload(dev, B43_NTAB_C0_ADJPLT, b43_ntab_adjustpower0);
-	ntab_upload(dev, B43_NTAB_C1_ADJPLT, b43_ntab_adjustpower1);
-	ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0);
-	ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1);
-	ntab_upload(dev, B43_NTAB_C0_IQLT, b43_ntab_iqlt0);
-	ntab_upload(dev, B43_NTAB_C1_IQLT, b43_ntab_iqlt1);
-	ntab_upload(dev, B43_NTAB_C0_LOFEEDTH, b43_ntab_loftlt0);
-	ntab_upload(dev, B43_NTAB_C1_LOFEEDTH, b43_ntab_loftlt1);
+	if (dev->phy.rev < 3)
+		b43_nphy_rev0_1_2_tables_init(dev);
+	else
+		b43_nphy_rev3plus_tables_init(dev);
 }
 
 static void b43_nphy_workarounds(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 4e2336315545..d0b91b561fb8 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -1336,7 +1336,7 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel)
 }
 
 
-const u8 b43_ntab_adjustpower0[] = {
+static const u8 b43_ntab_adjustpower0[] = {
 	0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
 	0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03,
 	0x04, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
@@ -1355,7 +1355,7 @@ const u8 b43_ntab_adjustpower0[] = {
 	0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F,
 };
 
-const u8 b43_ntab_adjustpower1[] = {
+static const u8 b43_ntab_adjustpower1[] = {
 	0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
 	0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03,
 	0x04, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
@@ -1374,11 +1374,11 @@ const u8 b43_ntab_adjustpower1[] = {
 	0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F,
 };
 
-const u16 b43_ntab_bdi[] = {
+static const u16 b43_ntab_bdi[] = {
 	0x0070, 0x0126, 0x012C, 0x0246, 0x048D, 0x04D2,
 };
 
-const u32 b43_ntab_channelest[] = {
+static const u32 b43_ntab_channelest[] = {
 	0x44444444, 0x44444444, 0x44444444, 0x44444444,
 	0x44444444, 0x44444444, 0x44444444, 0x44444444,
 	0x10101010, 0x10101010, 0x10101010, 0x10101010,
@@ -1405,7 +1405,7 @@ const u32 b43_ntab_channelest[] = {
 	0x10101010, 0x10101010, 0x10101010, 0x10101010,
 };
 
-const u8 b43_ntab_estimatepowerlt0[] = {
+static const u8 b43_ntab_estimatepowerlt0[] = {
 	0x50, 0x4F, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A, 0x49,
 	0x48, 0x47, 0x46, 0x45, 0x44, 0x43, 0x42, 0x41,
 	0x40, 0x3F, 0x3E, 0x3D, 0x3C, 0x3B, 0x3A, 0x39,
@@ -1416,7 +1416,7 @@ const u8 b43_ntab_estimatepowerlt0[] = {
 	0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11,
 };
 
-const u8 b43_ntab_estimatepowerlt1[] = {
+static const u8 b43_ntab_estimatepowerlt1[] = {
 	0x50, 0x4F, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A, 0x49,
 	0x48, 0x47, 0x46, 0x45, 0x44, 0x43, 0x42, 0x41,
 	0x40, 0x3F, 0x3E, 0x3D, 0x3C, 0x3B, 0x3A, 0x39,
@@ -1427,14 +1427,14 @@ const u8 b43_ntab_estimatepowerlt1[] = {
 	0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11,
 };
 
-const u8 b43_ntab_framelookup[] = {
+static const u8 b43_ntab_framelookup[] = {
 	0x02, 0x04, 0x14, 0x14, 0x03, 0x05, 0x16, 0x16,
 	0x0A, 0x0C, 0x1C, 0x1C, 0x0B, 0x0D, 0x1E, 0x1E,
 	0x06, 0x08, 0x18, 0x18, 0x07, 0x09, 0x1A, 0x1A,
 	0x0E, 0x10, 0x20, 0x28, 0x0F, 0x11, 0x22, 0x2A,
 };
 
-const u32 b43_ntab_framestruct[] = {
+static const u32 b43_ntab_framestruct[] = {
 	0x08004A04, 0x00100000, 0x01000A05, 0x00100020,
 	0x09804506, 0x00100030, 0x09804507, 0x00100030,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -1645,7 +1645,7 @@ const u32 b43_ntab_framestruct[] = {
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 };
 
-const u32 b43_ntab_gainctl0[] = {
+static const u32 b43_ntab_gainctl0[] = {
 	0x007F003F, 0x007E013F, 0x007D023E, 0x007C033E,
 	0x007B043D, 0x007A053D, 0x0079063C, 0x0078073C,
 	0x0077083B, 0x0076093B, 0x00750A3A, 0x00740B3A,
@@ -1680,7 +1680,7 @@ const u32 b43_ntab_gainctl0[] = {
 	0x00030C01, 0x00020D01, 0x00010E00, 0x00000F00,
 };
 
-const u32 b43_ntab_gainctl1[] = {
+static const u32 b43_ntab_gainctl1[] = {
 	0x007F003F, 0x007E013F, 0x007D023E, 0x007C033E,
 	0x007B043D, 0x007A053D, 0x0079063C, 0x0078073C,
 	0x0077083B, 0x0076093B, 0x00750A3A, 0x00740B3A,
@@ -1715,12 +1715,12 @@ const u32 b43_ntab_gainctl1[] = {
 	0x00030C01, 0x00020D01, 0x00010E00, 0x00000F00,
 };
 
-const u32 b43_ntab_intlevel[] = {
+static const u32 b43_ntab_intlevel[] = {
 	0x00802070, 0x0671188D, 0x0A60192C, 0x0A300E46,
 	0x00C1188D, 0x080024D2, 0x00000070,
 };
 
-const u32 b43_ntab_iqlt0[] = {
+static const u32 b43_ntab_iqlt0[] = {
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
@@ -1755,7 +1755,7 @@ const u32 b43_ntab_iqlt0[] = {
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
 };
 
-const u32 b43_ntab_iqlt1[] = {
+static const u32 b43_ntab_iqlt1[] = {
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
@@ -1790,7 +1790,7 @@ const u32 b43_ntab_iqlt1[] = {
 	0x0000007F, 0x0000007F, 0x0000007F, 0x0000007F,
 };
 
-const u16 b43_ntab_loftlt0[] = {
+static const u16 b43_ntab_loftlt0[] = {
 	0x0000, 0x0101, 0x0002, 0x0103, 0x0000, 0x0101,
 	0x0002, 0x0103, 0x0000, 0x0101, 0x0002, 0x0103,
 	0x0000, 0x0101, 0x0002, 0x0103, 0x0000, 0x0101,
@@ -1815,7 +1815,7 @@ const u16 b43_ntab_loftlt0[] = {
 	0x0002, 0x0103,
 };
 
-const u16 b43_ntab_loftlt1[] = {
+static const u16 b43_ntab_loftlt1[] = {
 	0x0000, 0x0101, 0x0002, 0x0103, 0x0000, 0x0101,
 	0x0002, 0x0103, 0x0000, 0x0101, 0x0002, 0x0103,
 	0x0000, 0x0101, 0x0002, 0x0103, 0x0000, 0x0101,
@@ -1840,7 +1840,7 @@ const u16 b43_ntab_loftlt1[] = {
 	0x0002, 0x0103,
 };
 
-const u8 b43_ntab_mcs[] = {
+static const u8 b43_ntab_mcs[] = {
 	0x00, 0x08, 0x0A, 0x10, 0x12, 0x19, 0x1A, 0x1C,
 	0x40, 0x48, 0x4A, 0x50, 0x52, 0x59, 0x5A, 0x5C,
 	0x80, 0x88, 0x8A, 0x90, 0x92, 0x99, 0x9A, 0x9C,
@@ -1859,7 +1859,7 @@ const u8 b43_ntab_mcs[] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
 
-const u32 b43_ntab_noisevar10[] = {
+static const u32 b43_ntab_noisevar10[] = {
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
@@ -1926,7 +1926,7 @@ const u32 b43_ntab_noisevar10[] = {
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
 };
 
-const u32 b43_ntab_noisevar11[] = {
+static const u32 b43_ntab_noisevar11[] = {
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
@@ -1993,7 +1993,7 @@ const u32 b43_ntab_noisevar11[] = {
 	0x020C020C, 0x0000014D, 0x020C020C, 0x0000014D,
 };
 
-const u16 b43_ntab_pilot[] = {
+static const u16 b43_ntab_pilot[] = {
 	0xFF08, 0xFF08, 0xFF08, 0xFF08, 0xFF08, 0xFF08,
 	0xFF08, 0xFF08, 0x80D5, 0x80D5, 0x80D5, 0x80D5,
 	0x80D5, 0x80D5, 0x80D5, 0x80D5, 0xFF0A, 0xFF82,
@@ -2011,12 +2011,12 @@ const u16 b43_ntab_pilot[] = {
 	0xF0A0, 0xF028, 0xFFFF, 0xFFFF,
 };
 
-const u32 b43_ntab_pilotlt[] = {
+static const u32 b43_ntab_pilotlt[] = {
 	0x76540123, 0x62407351, 0x76543201, 0x76540213,
 	0x76540123, 0x76430521,
 };
 
-const u32 b43_ntab_tdi20a0[] = {
+static const u32 b43_ntab_tdi20a0[] = {
 	0x00091226, 0x000A1429, 0x000B56AD, 0x000C58B0,
 	0x000D5AB3, 0x000E9CB6, 0x000F9EBA, 0x0000C13D,
 	0x00020301, 0x00030504, 0x00040708, 0x0005090B,
@@ -2033,7 +2033,7 @@ const u32 b43_ntab_tdi20a0[] = {
 	0x00000000, 0x00000000, 0x00000000,
 };
 
-const u32 b43_ntab_tdi20a1[] = {
+static const u32 b43_ntab_tdi20a1[] = {
 	0x00014B26, 0x00028D29, 0x000393AD, 0x00049630,
 	0x0005D833, 0x0006DA36, 0x00099C3A, 0x000A9E3D,
 	0x000BC081, 0x000CC284, 0x000DC488, 0x000F068B,
@@ -2050,7 +2050,7 @@ const u32 b43_ntab_tdi20a1[] = {
 	0x00000000, 0x00000000, 0x00000000,
 };
 
-const u32 b43_ntab_tdi40a0[] = {
+static const u32 b43_ntab_tdi40a0[] = {
 	0x0011A346, 0x00136CCF, 0x0014F5D9, 0x001641E2,
 	0x0017CB6B, 0x00195475, 0x001B2383, 0x001CAD0C,
 	0x001E7616, 0x0000821F, 0x00020BA8, 0x0003D4B2,
@@ -2081,7 +2081,7 @@ const u32 b43_ntab_tdi40a0[] = {
 	0x00000000, 0x00000000,
 };
 
-const u32 b43_ntab_tdi40a1[] = {
+static const u32 b43_ntab_tdi40a1[] = {
 	0x001EDB36, 0x000129CA, 0x0002B353, 0x00047CDD,
 	0x0005C8E6, 0x000791EF, 0x00091BF9, 0x000AAA07,
 	0x000C3391, 0x000DFD1A, 0x00120923, 0x0013D22D,
@@ -2112,7 +2112,7 @@ const u32 b43_ntab_tdi40a1[] = {
 	0x00000000, 0x00000000,
 };
 
-const u32 b43_ntab_tdtrn[] = {
+static const u32 b43_ntab_tdtrn[] = {
 	0x061C061C, 0x0050EE68, 0xF592FE36, 0xFE5212F6,
 	0x00000C38, 0xFE5212F6, 0xF592FE36, 0x0050EE68,
 	0x061C061C, 0xEE680050, 0xFE36F592, 0x12F6FE52,
@@ -2291,7 +2291,7 @@ const u32 b43_ntab_tdtrn[] = {
 	0xFA58FC00, 0x0B64FC7E, 0x0800F7B6, 0x00F006BE,
 };
 
-const u32 b43_ntab_tmap[] = {
+static const u32 b43_ntab_tmap[] = {
 	0x8A88AA80, 0x8AAAAA8A, 0x8A8A8AA8, 0x00000888,
 	0x88000000, 0x8A8A88AA, 0x8AA88888, 0x8888A8A8,
 	0xF1111110, 0x11111111, 0x11F11111, 0x00000111,
@@ -2474,3 +2474,51 @@ void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value)
 	/* Some compiletime assertions... */
 	assert_ntab_array_sizes();
 }
+
+#define ntab_upload(dev, offset, data) do { \
+		unsigned int i;						\
+		for (i = 0; i < (offset##_SIZE); i++)			\
+			b43_ntab_write(dev, (offset) + i, (data)[i]);	\
+	} while (0)
+
+void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev)
+{
+	/* Static tables */
+	ntab_upload(dev, B43_NTAB_FRAMESTRUCT, b43_ntab_framestruct);
+	ntab_upload(dev, B43_NTAB_FRAMELT, b43_ntab_framelookup);
+	ntab_upload(dev, B43_NTAB_TMAP, b43_ntab_tmap);
+	ntab_upload(dev, B43_NTAB_TDTRN, b43_ntab_tdtrn);
+	ntab_upload(dev, B43_NTAB_INTLEVEL, b43_ntab_intlevel);
+	ntab_upload(dev, B43_NTAB_PILOT, b43_ntab_pilot);
+	ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt);
+	ntab_upload(dev, B43_NTAB_TDI20A0, b43_ntab_tdi20a0);
+	ntab_upload(dev, B43_NTAB_TDI20A1, b43_ntab_tdi20a1);
+	ntab_upload(dev, B43_NTAB_TDI40A0, b43_ntab_tdi40a0);
+	ntab_upload(dev, B43_NTAB_TDI40A1, b43_ntab_tdi40a1);
+	ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi);
+	ntab_upload(dev, B43_NTAB_CHANEST, b43_ntab_channelest);
+	ntab_upload(dev, B43_NTAB_MCS, b43_ntab_mcs);
+
+	/* Volatile tables */
+	ntab_upload(dev, B43_NTAB_NOISEVAR10, b43_ntab_noisevar10);
+	ntab_upload(dev, B43_NTAB_NOISEVAR11, b43_ntab_noisevar11);
+	ntab_upload(dev, B43_NTAB_C0_ESTPLT, b43_ntab_estimatepowerlt0);
+	ntab_upload(dev, B43_NTAB_C1_ESTPLT, b43_ntab_estimatepowerlt1);
+	ntab_upload(dev, B43_NTAB_C0_ADJPLT, b43_ntab_adjustpower0);
+	ntab_upload(dev, B43_NTAB_C1_ADJPLT, b43_ntab_adjustpower1);
+	ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0);
+	ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1);
+	ntab_upload(dev, B43_NTAB_C0_IQLT, b43_ntab_iqlt0);
+	ntab_upload(dev, B43_NTAB_C1_IQLT, b43_ntab_iqlt1);
+	ntab_upload(dev, B43_NTAB_C0_LOFEEDTH, b43_ntab_loftlt0);
+	ntab_upload(dev, B43_NTAB_C1_LOFEEDTH, b43_ntab_loftlt1);
+}
+
+void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev)
+{
+	/* Static tables */
+	/* TODO */
+
+	/* Volatile tables */
+	/* TODO */
+}
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 4d498b053ec7..1f0a602fd247 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -128,32 +128,7 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel);
 
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
 
-extern const u8 b43_ntab_adjustpower0[];
-extern const u8 b43_ntab_adjustpower1[];
-extern const u16 b43_ntab_bdi[];
-extern const u32 b43_ntab_channelest[];
-extern const u8 b43_ntab_estimatepowerlt0[];
-extern const u8 b43_ntab_estimatepowerlt1[];
-extern const u8 b43_ntab_framelookup[];
-extern const u32 b43_ntab_framestruct[];
-extern const u32 b43_ntab_gainctl0[];
-extern const u32 b43_ntab_gainctl1[];
-extern const u32 b43_ntab_intlevel[];
-extern const u32 b43_ntab_iqlt0[];
-extern const u32 b43_ntab_iqlt1[];
-extern const u16 b43_ntab_loftlt0[];
-extern const u16 b43_ntab_loftlt1[];
-extern const u8 b43_ntab_mcs[];
-extern const u32 b43_ntab_noisevar10[];
-extern const u32 b43_ntab_noisevar11[];
-extern const u16 b43_ntab_pilot[];
-extern const u32 b43_ntab_pilotlt[];
-extern const u32 b43_ntab_tdi20a0[];
-extern const u32 b43_ntab_tdi20a1[];
-extern const u32 b43_ntab_tdi40a0[];
-extern const u32 b43_ntab_tdi40a1[];
-extern const u32 b43_ntab_tdtrn[];
-extern const u32 b43_ntab_tmap[];
-
+void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev);
+void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev);
 
 #endif /* B43_TABLES_NPHY_H_ */
-- 
cgit v1.2.3


From 76a4db303d06066792bbc0e886def2cf99b232ef Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:27:46 +0100
Subject: b43: N-PHY: add shared memory offsets definitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/b43.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 2f12a750bc98..54d6085a887b 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -253,6 +253,14 @@ enum {
 #define B43_SHM_SH_MAXBFRAMES		0x0080	/* Maximum number of frames in a burst */
 #define B43_SHM_SH_SPUWKUP		0x0094	/* pre-wakeup for synth PU in us */
 #define B43_SHM_SH_PRETBTT		0x0096	/* pre-TBTT in us */
+/* SHM_SHARED tx iq workarounds */
+#define B43_SHM_SH_NPHY_TXIQW0		0x0700
+#define B43_SHM_SH_NPHY_TXIQW1		0x0702
+#define B43_SHM_SH_NPHY_TXIQW2		0x0704
+#define B43_SHM_SH_NPHY_TXIQW3		0x0706
+/* SHM_SHARED tx pwr ctrl */
+#define B43_SHM_SH_NPHY_TXPWR_INDX0	0x0708
+#define B43_SHM_SH_NPHY_TXPWR_INDX1	0x070E
 
 /* SHM_SCRATCH offsets */
 #define B43_SHM_SC_MINCONT		0x0003	/* Minimum contention window */
-- 
cgit v1.2.3


From f8187b5b9780a9ac3c12c70413615a0fdf321cd5 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:34:21 +0100
Subject: b43: N-PHY: add needed struct definitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       | 24 +++++++++++++++++++++
 drivers/net/wireless/b43/phy_n.h       | 38 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h |  5 +++++
 3 files changed, 67 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 6b995b92af7a..cb784a2504a6 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -29,6 +29,30 @@
 #include "phy_n.h"
 #include "tables_nphy.h"
 
+struct nphy_txgains {
+	u16 txgm[2];
+	u16 pga[2];
+	u16 pad[2];
+	u16 ipa[2];
+};
+
+struct nphy_iqcal_params {
+	u16 txgm;
+	u16 pga;
+	u16 pad;
+	u16 ipa;
+	u16 cal_gain;
+	u16 ncorr[5];
+};
+
+struct nphy_iq_est {
+	s32 iq0_prod;
+	u32 i0_pwr;
+	u32 q0_pwr;
+	s32 iq1_prod;
+	u32 i1_pwr;
+	u32 q1_pwr;
+};
 
 void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
 {//TODO
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 1749aef4147d..f829e4e397e8 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -919,6 +919,44 @@
 
 struct b43_wldev;
 
+struct b43_phy_n_iq_comp {
+	s16 a0;
+	s16 b0;
+	s16 a1;
+	s16 b1;
+};
+
+struct b43_phy_n_rssical_cache {
+	u16 rssical_radio_regs_2G[2];
+	u16 rssical_phy_regs_2G[12];
+
+	u16 rssical_radio_regs_5G[2];
+	u16 rssical_phy_regs_5G[12];
+};
+
+struct b43_phy_n_cal_cache {
+	u16 txcal_radio_regs_2G[8];
+	u16 txcal_coeffs_2G[8];
+	struct b43_phy_n_iq_comp rxcal_coeffs_2G;
+
+	u16 txcal_radio_regs_5G[8];
+	u16 txcal_coeffs_5G[8];
+	struct b43_phy_n_iq_comp rxcal_coeffs_5G;
+};
+
+struct b43_phy_n_txpwrindex {
+	s8 index;
+	s8 index_internal;
+	s8 index_internal_save;
+	u16 AfectrlOverride;
+	u16 AfeCtrlDacGain;
+	u16 rad_gain;
+	u8 bbmult;
+	u16 iqcomp_a;
+	u16 iqcomp_b;
+	u16 locomp;
+};
+
 struct b43_phy_n {
 	//TODO lots of missing stuff
 };
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 1f0a602fd247..f6753c4b96b2 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -46,6 +46,11 @@ struct b43_nphy_channeltab_entry {
 
 struct b43_wldev;
 
+struct nphy_txiqcal_ladder {
+	u8 percent;
+	u8 g_env;
+};
+
 /* Upload the default register value table.
  * If "ghz5" is true, we upload the 5Ghz table. Otherwise the 2.4Ghz
  * table is uploaded. If "ignore_uploadflag" is true, we upload any value
-- 
cgit v1.2.3


From 5b0ade3377b91da14410612b2051d66d26d31069 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:40:03 +0100
Subject: b43: N-PHY: add missing register definitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index f829e4e397e8..c5084a4e30cd 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -231,6 +231,7 @@
 #define B43_NPHY_C2_TXIQ_COMP_OFF		B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */
 #define B43_NPHY_C1_TXCTL			B43_PHY_N(0x08B) /* Core 1 TX control */
 #define B43_NPHY_C2_TXCTL			B43_PHY_N(0x08C) /* Core 2 TX control */
+#define B43_NPHY_AFECTL_OVER1			B43_PHY_N(0x08F) /* AFE control override 1 */
 #define B43_NPHY_SCRAM_SIGCTL			B43_PHY_N(0x090) /* Scram signal control */
 #define  B43_NPHY_SCRAM_SIGCTL_INITST		0x007F /* Initial state value */
 #define  B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT	0
@@ -705,6 +706,10 @@
 #define B43_NPHY_TXPCTL_INIT			B43_PHY_N(0x222) /* TX power controll init */
 #define  B43_NPHY_TXPCTL_INIT_PIDXI1		0x00FF /* Power index init 1 */
 #define  B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT	0
+#define B43_NPHY_PAPD_EN0			B43_PHY_N(0x297) /* PAPD Enable0 TBD */
+#define B43_NPHY_EPS_TABLE_ADJ0			B43_PHY_N(0x298) /* EPS Table Adj0 TBD */
+#define B43_NPHY_PAPD_EN1			B43_PHY_N(0x29B) /* PAPD Enable1 TBD */
+#define B43_NPHY_EPS_TABLE_ADJ1			B43_PHY_N(0x29C) /* EPS Table Adj1 TBD */
 
 
 
-- 
cgit v1.2.3


From 2a448bfc70f4fd4a54996d1c7a371ba28ec0568f Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 12:54:30 +0100
Subject: b43: N-PHY: add global variables to b43_phy_n struct
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.h | 44 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index c5084a4e30cd..4572866756fc 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -963,7 +963,49 @@ struct b43_phy_n_txpwrindex {
 };
 
 struct b43_phy_n {
-	//TODO lots of missing stuff
+	u8 antsel_type;
+	u8 cal_orig_pwr_idx[2];
+	u8 measure_hold;
+	u8 phyrxchain;
+	u8 perical;
+	u32 deaf_count;
+	u32 rxcalparams;
+	bool hang_avoid;
+	bool mute;
+	u16 papd_epsilon_offset[2];
+
+	u8 mphase_cal_phase_id;
+	u16 mphase_txcal_cmdidx;
+	u16 mphase_txcal_numcmds;
+	u16 mphase_txcal_bestcoeffs[11];
+
+	u8 txpwrctrl;
+	u16 txcal_bbmult;
+	u16 txiqlocal_bestc[11];
+	bool txiqlocal_coeffsvalid;
+	struct b43_phy_n_txpwrindex txpwrindex[2];
+
+	u16 tx_rx_cal_phy_saveregs[11];
+	u16 tx_rx_cal_radio_saveregs[22];
+
+	u16 rfctrl_intc1_save;
+	u16 rfctrl_intc2_save;
+
+	u16 classifier_state;
+	u16 clip_state[2];
+
+	bool ipa2g_on;
+	u8 iqcal_chanspec_2G;
+	u8 rssical_chanspec_2G;
+
+	bool ipa5g_on;
+	u8 iqcal_chanspec_5G;
+	u8 rssical_chanspec_5G;
+
+	struct b43_phy_n_rssical_cache rssical_cache;
+	struct b43_phy_n_cal_cache cal_cache;
+	bool crsminpwr_adjusted;
+	bool noisevars_adjusted;
 };
 
 
-- 
cgit v1.2.3


From 088e56b44a52bbd58a790627148cf75ed71ae34b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 13:02:45 +0100
Subject: b43: N-PHY: add various tables
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/tables_nphy.c | 477 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h |  37 +++
 2 files changed, 514 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index d0b91b561fb8..7dff853ab962 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2406,6 +2406,483 @@ static const u32 b43_ntab_tmap[] = {
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 };
 
+const u32 b43_ntab_tx_gain_rev0_1_2[] = {
+	0x03cc2b44, 0x03cc2b42, 0x03cc2a44, 0x03cc2a42,
+	0x03cc2944, 0x03c82b44, 0x03c82b42, 0x03c82a44,
+	0x03c82a42, 0x03c82944, 0x03c82942, 0x03c82844,
+	0x03c82842, 0x03c42b44, 0x03c42b42, 0x03c42a44,
+	0x03c42a42, 0x03c42944, 0x03c42942, 0x03c42844,
+	0x03c42842, 0x03c42744, 0x03c42742, 0x03c42644,
+	0x03c42642, 0x03c42544, 0x03c42542, 0x03c42444,
+	0x03c42442, 0x03c02b44, 0x03c02b42, 0x03c02a44,
+	0x03c02a42, 0x03c02944, 0x03c02942, 0x03c02844,
+	0x03c02842, 0x03c02744, 0x03c02742, 0x03b02b44,
+	0x03b02b42, 0x03b02a44, 0x03b02a42, 0x03b02944,
+	0x03b02942, 0x03b02844, 0x03b02842, 0x03b02744,
+	0x03b02742, 0x03b02644, 0x03b02642, 0x03b02544,
+	0x03b02542, 0x03a02b44, 0x03a02b42, 0x03a02a44,
+	0x03a02a42, 0x03a02944, 0x03a02942, 0x03a02844,
+	0x03a02842, 0x03a02744, 0x03a02742, 0x03902b44,
+	0x03902b42, 0x03902a44, 0x03902a42, 0x03902944,
+	0x03902942, 0x03902844, 0x03902842, 0x03902744,
+	0x03902742, 0x03902644, 0x03902642, 0x03902544,
+	0x03902542, 0x03802b44, 0x03802b42, 0x03802a44,
+	0x03802a42, 0x03802944, 0x03802942, 0x03802844,
+	0x03802842, 0x03802744, 0x03802742, 0x03802644,
+	0x03802642, 0x03802544, 0x03802542, 0x03802444,
+	0x03802442, 0x03802344, 0x03802342, 0x03802244,
+	0x03802242, 0x03802144, 0x03802142, 0x03802044,
+	0x03802042, 0x03801f44, 0x03801f42, 0x03801e44,
+	0x03801e42, 0x03801d44, 0x03801d42, 0x03801c44,
+	0x03801c42, 0x03801b44, 0x03801b42, 0x03801a44,
+	0x03801a42, 0x03801944, 0x03801942, 0x03801844,
+	0x03801842, 0x03801744, 0x03801742, 0x03801644,
+	0x03801642, 0x03801544, 0x03801542, 0x03801444,
+	0x03801442, 0x03801344, 0x03801342, 0x00002b00,
+};
+
+const u32 b43_ntab_tx_gain_rev3plus_2ghz[] = {
+	0x1f410044, 0x1f410042, 0x1f410040, 0x1f41003e,
+	0x1f41003c, 0x1f41003b, 0x1f410039, 0x1f410037,
+	0x1e410044, 0x1e410042, 0x1e410040, 0x1e41003e,
+	0x1e41003c, 0x1e41003b, 0x1e410039, 0x1e410037,
+	0x1d410044, 0x1d410042, 0x1d410040, 0x1d41003e,
+	0x1d41003c, 0x1d41003b, 0x1d410039, 0x1d410037,
+	0x1c410044, 0x1c410042, 0x1c410040, 0x1c41003e,
+	0x1c41003c, 0x1c41003b, 0x1c410039, 0x1c410037,
+	0x1b410044, 0x1b410042, 0x1b410040, 0x1b41003e,
+	0x1b41003c, 0x1b41003b, 0x1b410039, 0x1b410037,
+	0x1a410044, 0x1a410042, 0x1a410040, 0x1a41003e,
+	0x1a41003c, 0x1a41003b, 0x1a410039, 0x1a410037,
+	0x19410044, 0x19410042, 0x19410040, 0x1941003e,
+	0x1941003c, 0x1941003b, 0x19410039, 0x19410037,
+	0x18410044, 0x18410042, 0x18410040, 0x1841003e,
+	0x1841003c, 0x1841003b, 0x18410039, 0x18410037,
+	0x17410044, 0x17410042, 0x17410040, 0x1741003e,
+	0x1741003c, 0x1741003b, 0x17410039, 0x17410037,
+	0x16410044, 0x16410042, 0x16410040, 0x1641003e,
+	0x1641003c, 0x1641003b, 0x16410039, 0x16410037,
+	0x15410044, 0x15410042, 0x15410040, 0x1541003e,
+	0x1541003c, 0x1541003b, 0x15410039, 0x15410037,
+	0x14410044, 0x14410042, 0x14410040, 0x1441003e,
+	0x1441003c, 0x1441003b, 0x14410039, 0x14410037,
+	0x13410044, 0x13410042, 0x13410040, 0x1341003e,
+	0x1341003c, 0x1341003b, 0x13410039, 0x13410037,
+	0x12410044, 0x12410042, 0x12410040, 0x1241003e,
+	0x1241003c, 0x1241003b, 0x12410039, 0x12410037,
+	0x11410044, 0x11410042, 0x11410040, 0x1141003e,
+	0x1141003c, 0x1141003b, 0x11410039, 0x11410037,
+	0x10410044, 0x10410042, 0x10410040, 0x1041003e,
+	0x1041003c, 0x1041003b, 0x10410039, 0x10410037,
+};
+
+const u32 b43_ntab_tx_gain_rev3_5ghz[] = {
+	0xcff70044, 0xcff70042, 0xcff70040, 0xcff7003e,
+	0xcff7003c, 0xcff7003b, 0xcff70039, 0xcff70037,
+	0xcef70044, 0xcef70042, 0xcef70040, 0xcef7003e,
+	0xcef7003c, 0xcef7003b, 0xcef70039, 0xcef70037,
+	0xcdf70044, 0xcdf70042, 0xcdf70040, 0xcdf7003e,
+	0xcdf7003c, 0xcdf7003b, 0xcdf70039, 0xcdf70037,
+	0xccf70044, 0xccf70042, 0xccf70040, 0xccf7003e,
+	0xccf7003c, 0xccf7003b, 0xccf70039, 0xccf70037,
+	0xcbf70044, 0xcbf70042, 0xcbf70040, 0xcbf7003e,
+	0xcbf7003c, 0xcbf7003b, 0xcbf70039, 0xcbf70037,
+	0xcaf70044, 0xcaf70042, 0xcaf70040, 0xcaf7003e,
+	0xcaf7003c, 0xcaf7003b, 0xcaf70039, 0xcaf70037,
+	0xc9f70044, 0xc9f70042, 0xc9f70040, 0xc9f7003e,
+	0xc9f7003c, 0xc9f7003b, 0xc9f70039, 0xc9f70037,
+	0xc8f70044, 0xc8f70042, 0xc8f70040, 0xc8f7003e,
+	0xc8f7003c, 0xc8f7003b, 0xc8f70039, 0xc8f70037,
+	0xc7f70044, 0xc7f70042, 0xc7f70040, 0xc7f7003e,
+	0xc7f7003c, 0xc7f7003b, 0xc7f70039, 0xc7f70037,
+	0xc6f70044, 0xc6f70042, 0xc6f70040, 0xc6f7003e,
+	0xc6f7003c, 0xc6f7003b, 0xc6f70039, 0xc6f70037,
+	0xc5f70044, 0xc5f70042, 0xc5f70040, 0xc5f7003e,
+	0xc5f7003c, 0xc5f7003b, 0xc5f70039, 0xc5f70037,
+	0xc4f70044, 0xc4f70042, 0xc4f70040, 0xc4f7003e,
+	0xc4f7003c, 0xc4f7003b, 0xc4f70039, 0xc4f70037,
+	0xc3f70044, 0xc3f70042, 0xc3f70040, 0xc3f7003e,
+	0xc3f7003c, 0xc3f7003b, 0xc3f70039, 0xc3f70037,
+	0xc2f70044, 0xc2f70042, 0xc2f70040, 0xc2f7003e,
+	0xc2f7003c, 0xc2f7003b, 0xc2f70039, 0xc2f70037,
+	0xc1f70044, 0xc1f70042, 0xc1f70040, 0xc1f7003e,
+	0xc1f7003c, 0xc1f7003b, 0xc1f70039, 0xc1f70037,
+	0xc0f70044, 0xc0f70042, 0xc0f70040, 0xc0f7003e,
+	0xc0f7003c, 0xc0f7003b, 0xc0f70039, 0xc0f70037,
+};
+
+const u32 b43_ntab_tx_gain_rev4_5ghz[] = {
+	0x2ff20044, 0x2ff20042, 0x2ff20040, 0x2ff2003e,
+	0x2ff2003c, 0x2ff2003b, 0x2ff20039, 0x2ff20037,
+	0x2ef20044, 0x2ef20042, 0x2ef20040, 0x2ef2003e,
+	0x2ef2003c, 0x2ef2003b, 0x2ef20039, 0x2ef20037,
+	0x2df20044, 0x2df20042, 0x2df20040, 0x2df2003e,
+	0x2df2003c, 0x2df2003b, 0x2df20039, 0x2df20037,
+	0x2cf20044, 0x2cf20042, 0x2cf20040, 0x2cf2003e,
+	0x2cf2003c, 0x2cf2003b, 0x2cf20039, 0x2cf20037,
+	0x2bf20044, 0x2bf20042, 0x2bf20040, 0x2bf2003e,
+	0x2bf2003c, 0x2bf2003b, 0x2bf20039, 0x2bf20037,
+	0x2af20044, 0x2af20042, 0x2af20040, 0x2af2003e,
+	0x2af2003c, 0x2af2003b, 0x2af20039, 0x2af20037,
+	0x29f20044, 0x29f20042, 0x29f20040, 0x29f2003e,
+	0x29f2003c, 0x29f2003b, 0x29f20039, 0x29f20037,
+	0x28f20044, 0x28f20042, 0x28f20040, 0x28f2003e,
+	0x28f2003c, 0x28f2003b, 0x28f20039, 0x28f20037,
+	0x27f20044, 0x27f20042, 0x27f20040, 0x27f2003e,
+	0x27f2003c, 0x27f2003b, 0x27f20039, 0x27f20037,
+	0x26f20044, 0x26f20042, 0x26f20040, 0x26f2003e,
+	0x26f2003c, 0x26f2003b, 0x26f20039, 0x26f20037,
+	0x25f20044, 0x25f20042, 0x25f20040, 0x25f2003e,
+	0x25f2003c, 0x25f2003b, 0x25f20039, 0x25f20037,
+	0x24f20044, 0x24f20042, 0x24f20040, 0x24f2003e,
+	0x24f2003c, 0x24f2003b, 0x24f20039, 0x24f20038,
+	0x23f20041, 0x23f20040, 0x23f2003f, 0x23f2003e,
+	0x23f2003c, 0x23f2003b, 0x23f20039, 0x23f20037,
+	0x22f20044, 0x22f20042, 0x22f20040, 0x22f2003e,
+	0x22f2003c, 0x22f2003b, 0x22f20039, 0x22f20037,
+	0x21f20044, 0x21f20042, 0x21f20040, 0x21f2003e,
+	0x21f2003c, 0x21f2003b, 0x21f20039, 0x21f20037,
+	0x20d20043, 0x20d20041, 0x20d2003e, 0x20d2003c,
+	0x20d2003a, 0x20d20038, 0x20d20036, 0x20d20034,
+};
+
+const u32 b43_ntab_tx_gain_rev5plus_5ghz[] = {
+	0x0f62004a, 0x0f620048, 0x0f620046, 0x0f620044,
+	0x0f620042, 0x0f620040, 0x0f62003e, 0x0f62003c,
+	0x0e620044, 0x0e620042, 0x0e620040, 0x0e62003e,
+	0x0e62003c, 0x0e62003d, 0x0e62003b, 0x0e62003a,
+	0x0d620043, 0x0d620041, 0x0d620040, 0x0d62003e,
+	0x0d62003d, 0x0d62003c, 0x0d62003b, 0x0d62003a,
+	0x0c620041, 0x0c620040, 0x0c62003f, 0x0c62003e,
+	0x0c62003c, 0x0c62003b, 0x0c620039, 0x0c620037,
+	0x0b620046, 0x0b620044, 0x0b620042, 0x0b620040,
+	0x0b62003e, 0x0b62003c, 0x0b62003b, 0x0b62003a,
+	0x0a620041, 0x0a620040, 0x0a62003e, 0x0a62003c,
+	0x0a62003b, 0x0a62003a, 0x0a620039, 0x0a620038,
+	0x0962003e, 0x0962003d, 0x0962003c, 0x0962003b,
+	0x09620039, 0x09620037, 0x09620035, 0x09620033,
+	0x08620044, 0x08620042, 0x08620040, 0x0862003e,
+	0x0862003c, 0x0862003b, 0x0862003a, 0x08620039,
+	0x07620043, 0x07620042, 0x07620040, 0x0762003f,
+	0x0762003d, 0x0762003b, 0x0762003a, 0x07620039,
+	0x0662003e, 0x0662003d, 0x0662003c, 0x0662003b,
+	0x06620039, 0x06620037, 0x06620035, 0x06620033,
+	0x05620046, 0x05620044, 0x05620042, 0x05620040,
+	0x0562003e, 0x0562003c, 0x0562003b, 0x05620039,
+	0x04620044, 0x04620042, 0x04620040, 0x0462003e,
+	0x0462003c, 0x0462003b, 0x04620039, 0x04620038,
+	0x0362003c, 0x0362003b, 0x0362003a, 0x03620039,
+	0x03620038, 0x03620037, 0x03620035, 0x03620033,
+	0x0262004c, 0x0262004a, 0x02620048, 0x02620047,
+	0x02620046, 0x02620044, 0x02620043, 0x02620042,
+	0x0162004a, 0x01620048, 0x01620046, 0x01620044,
+	0x01620043, 0x01620042, 0x01620041, 0x01620040,
+	0x00620042, 0x00620040, 0x0062003e, 0x0062003c,
+	0x0062003b, 0x00620039, 0x00620037, 0x00620035,
+};
+
+const u32 txpwrctrl_tx_gain_ipa[] = {
+	0x5ff7002d, 0x5ff7002b, 0x5ff7002a, 0x5ff70029,
+	0x5ff70028, 0x5ff70027, 0x5ff70026, 0x5ff70025,
+	0x5ef7002d, 0x5ef7002b, 0x5ef7002a, 0x5ef70029,
+	0x5ef70028, 0x5ef70027, 0x5ef70026, 0x5ef70025,
+	0x5df7002d, 0x5df7002b, 0x5df7002a, 0x5df70029,
+	0x5df70028, 0x5df70027, 0x5df70026, 0x5df70025,
+	0x5cf7002d, 0x5cf7002b, 0x5cf7002a, 0x5cf70029,
+	0x5cf70028, 0x5cf70027, 0x5cf70026, 0x5cf70025,
+	0x5bf7002d, 0x5bf7002b, 0x5bf7002a, 0x5bf70029,
+	0x5bf70028, 0x5bf70027, 0x5bf70026, 0x5bf70025,
+	0x5af7002d, 0x5af7002b, 0x5af7002a, 0x5af70029,
+	0x5af70028, 0x5af70027, 0x5af70026, 0x5af70025,
+	0x59f7002d, 0x59f7002b, 0x59f7002a, 0x59f70029,
+	0x59f70028, 0x59f70027, 0x59f70026, 0x59f70025,
+	0x58f7002d, 0x58f7002b, 0x58f7002a, 0x58f70029,
+	0x58f70028, 0x58f70027, 0x58f70026, 0x58f70025,
+	0x57f7002d, 0x57f7002b, 0x57f7002a, 0x57f70029,
+	0x57f70028, 0x57f70027, 0x57f70026, 0x57f70025,
+	0x56f7002d, 0x56f7002b, 0x56f7002a, 0x56f70029,
+	0x56f70028, 0x56f70027, 0x56f70026, 0x56f70025,
+	0x55f7002d, 0x55f7002b, 0x55f7002a, 0x55f70029,
+	0x55f70028, 0x55f70027, 0x55f70026, 0x55f70025,
+	0x54f7002d, 0x54f7002b, 0x54f7002a, 0x54f70029,
+	0x54f70028, 0x54f70027, 0x54f70026, 0x54f70025,
+	0x53f7002d, 0x53f7002b, 0x53f7002a, 0x53f70029,
+	0x53f70028, 0x53f70027, 0x53f70026, 0x53f70025,
+	0x52f7002d, 0x52f7002b, 0x52f7002a, 0x52f70029,
+	0x52f70028, 0x52f70027, 0x52f70026, 0x52f70025,
+	0x51f7002d, 0x51f7002b, 0x51f7002a, 0x51f70029,
+	0x51f70028, 0x51f70027, 0x51f70026, 0x51f70025,
+	0x50f7002d, 0x50f7002b, 0x50f7002a, 0x50f70029,
+	0x50f70028, 0x50f70027, 0x50f70026, 0x50f70025,
+};
+
+const u32 txpwrctrl_tx_gain_ipa_rev5[] = {
+	0x1ff7002d, 0x1ff7002b, 0x1ff7002a, 0x1ff70029,
+	0x1ff70028, 0x1ff70027, 0x1ff70026, 0x1ff70025,
+	0x1ef7002d, 0x1ef7002b, 0x1ef7002a, 0x1ef70029,
+	0x1ef70028, 0x1ef70027, 0x1ef70026, 0x1ef70025,
+	0x1df7002d, 0x1df7002b, 0x1df7002a, 0x1df70029,
+	0x1df70028, 0x1df70027, 0x1df70026, 0x1df70025,
+	0x1cf7002d, 0x1cf7002b, 0x1cf7002a, 0x1cf70029,
+	0x1cf70028, 0x1cf70027, 0x1cf70026, 0x1cf70025,
+	0x1bf7002d, 0x1bf7002b, 0x1bf7002a, 0x1bf70029,
+	0x1bf70028, 0x1bf70027, 0x1bf70026, 0x1bf70025,
+	0x1af7002d, 0x1af7002b, 0x1af7002a, 0x1af70029,
+	0x1af70028, 0x1af70027, 0x1af70026, 0x1af70025,
+	0x19f7002d, 0x19f7002b, 0x19f7002a, 0x19f70029,
+	0x19f70028, 0x19f70027, 0x19f70026, 0x19f70025,
+	0x18f7002d, 0x18f7002b, 0x18f7002a, 0x18f70029,
+	0x18f70028, 0x18f70027, 0x18f70026, 0x18f70025,
+	0x17f7002d, 0x17f7002b, 0x17f7002a, 0x17f70029,
+	0x17f70028, 0x17f70027, 0x17f70026, 0x17f70025,
+	0x16f7002d, 0x16f7002b, 0x16f7002a, 0x16f70029,
+	0x16f70028, 0x16f70027, 0x16f70026, 0x16f70025,
+	0x15f7002d, 0x15f7002b, 0x15f7002a, 0x15f70029,
+	0x15f70028, 0x15f70027, 0x15f70026, 0x15f70025,
+	0x14f7002d, 0x14f7002b, 0x14f7002a, 0x14f70029,
+	0x14f70028, 0x14f70027, 0x14f70026, 0x14f70025,
+	0x13f7002d, 0x13f7002b, 0x13f7002a, 0x13f70029,
+	0x13f70028, 0x13f70027, 0x13f70026, 0x13f70025,
+	0x12f7002d, 0x12f7002b, 0x12f7002a, 0x12f70029,
+	0x12f70028, 0x12f70027, 0x12f70026, 0x12f70025,
+	0x11f7002d, 0x11f7002b, 0x11f7002a, 0x11f70029,
+	0x11f70028, 0x11f70027, 0x11f70026, 0x11f70025,
+	0x10f7002d, 0x10f7002b, 0x10f7002a, 0x10f70029,
+	0x10f70028, 0x10f70027, 0x10f70026, 0x10f70025,
+};
+
+const u32 txpwrctrl_tx_gain_ipa_rev6[] = {
+	0x0ff7002d, 0x0ff7002b, 0x0ff7002a, 0x0ff70029,
+	0x0ff70028, 0x0ff70027, 0x0ff70026, 0x0ff70025,
+	0x0ef7002d, 0x0ef7002b, 0x0ef7002a, 0x0ef70029,
+	0x0ef70028, 0x0ef70027, 0x0ef70026, 0x0ef70025,
+	0x0df7002d, 0x0df7002b, 0x0df7002a, 0x0df70029,
+	0x0df70028, 0x0df70027, 0x0df70026, 0x0df70025,
+	0x0cf7002d, 0x0cf7002b, 0x0cf7002a, 0x0cf70029,
+	0x0cf70028, 0x0cf70027, 0x0cf70026, 0x0cf70025,
+	0x0bf7002d, 0x0bf7002b, 0x0bf7002a, 0x0bf70029,
+	0x0bf70028, 0x0bf70027, 0x0bf70026, 0x0bf70025,
+	0x0af7002d, 0x0af7002b, 0x0af7002a, 0x0af70029,
+	0x0af70028, 0x0af70027, 0x0af70026, 0x0af70025,
+	0x09f7002d, 0x09f7002b, 0x09f7002a, 0x09f70029,
+	0x09f70028, 0x09f70027, 0x09f70026, 0x09f70025,
+	0x08f7002d, 0x08f7002b, 0x08f7002a, 0x08f70029,
+	0x08f70028, 0x08f70027, 0x08f70026, 0x08f70025,
+	0x07f7002d, 0x07f7002b, 0x07f7002a, 0x07f70029,
+	0x07f70028, 0x07f70027, 0x07f70026, 0x07f70025,
+	0x06f7002d, 0x06f7002b, 0x06f7002a, 0x06f70029,
+	0x06f70028, 0x06f70027, 0x06f70026, 0x06f70025,
+	0x05f7002d, 0x05f7002b, 0x05f7002a, 0x05f70029,
+	0x05f70028, 0x05f70027, 0x05f70026, 0x05f70025,
+	0x04f7002d, 0x04f7002b, 0x04f7002a, 0x04f70029,
+	0x04f70028, 0x04f70027, 0x04f70026, 0x04f70025,
+	0x03f7002d, 0x03f7002b, 0x03f7002a, 0x03f70029,
+	0x03f70028, 0x03f70027, 0x03f70026, 0x03f70025,
+	0x02f7002d, 0x02f7002b, 0x02f7002a, 0x02f70029,
+	0x02f70028, 0x02f70027, 0x02f70026, 0x02f70025,
+	0x01f7002d, 0x01f7002b, 0x01f7002a, 0x01f70029,
+	0x01f70028, 0x01f70027, 0x01f70026, 0x01f70025,
+	0x00f7002d, 0x00f7002b, 0x00f7002a, 0x00f70029,
+	0x00f70028, 0x00f70027, 0x00f70026, 0x00f70025,
+};
+
+const u32 txpwrctrl_tx_gain_ipa_5g[] = {
+	0x7ff70035, 0x7ff70033, 0x7ff70032, 0x7ff70031,
+	0x7ff7002f, 0x7ff7002e, 0x7ff7002d, 0x7ff7002b,
+	0x7ff7002a, 0x7ff70029, 0x7ff70028, 0x7ff70027,
+	0x7ff70026, 0x7ff70024, 0x7ff70023, 0x7ff70022,
+	0x7ef70028, 0x7ef70027, 0x7ef70026, 0x7ef70025,
+	0x7ef70024, 0x7ef70023, 0x7df70028, 0x7df70027,
+	0x7df70026, 0x7df70025, 0x7df70024, 0x7df70023,
+	0x7df70022, 0x7cf70029, 0x7cf70028, 0x7cf70027,
+	0x7cf70026, 0x7cf70025, 0x7cf70023, 0x7cf70022,
+	0x7bf70029, 0x7bf70028, 0x7bf70026, 0x7bf70025,
+	0x7bf70024, 0x7bf70023, 0x7bf70022, 0x7bf70021,
+	0x7af70029, 0x7af70028, 0x7af70027, 0x7af70026,
+	0x7af70025, 0x7af70024, 0x7af70023, 0x7af70022,
+	0x79f70029, 0x79f70028, 0x79f70027, 0x79f70026,
+	0x79f70025, 0x79f70024, 0x79f70023, 0x79f70022,
+	0x78f70029, 0x78f70028, 0x78f70027, 0x78f70026,
+	0x78f70025, 0x78f70024, 0x78f70023, 0x78f70022,
+	0x77f70029, 0x77f70028, 0x77f70027, 0x77f70026,
+	0x77f70025, 0x77f70024, 0x77f70023, 0x77f70022,
+	0x76f70029, 0x76f70028, 0x76f70027, 0x76f70026,
+	0x76f70024, 0x76f70023, 0x76f70022, 0x76f70021,
+	0x75f70029, 0x75f70028, 0x75f70027, 0x75f70026,
+	0x75f70025, 0x75f70024, 0x75f70023, 0x74f70029,
+	0x74f70028, 0x74f70026, 0x74f70025, 0x74f70024,
+	0x74f70023, 0x74f70022, 0x73f70029, 0x73f70027,
+	0x73f70026, 0x73f70025, 0x73f70024, 0x73f70023,
+	0x73f70022, 0x72f70028, 0x72f70027, 0x72f70026,
+	0x72f70025, 0x72f70024, 0x72f70023, 0x72f70022,
+	0x71f70028, 0x71f70027, 0x71f70026, 0x71f70025,
+	0x71f70024, 0x71f70023, 0x70f70028, 0x70f70027,
+	0x70f70026, 0x70f70024, 0x70f70023, 0x70f70022,
+	0x70f70021, 0x70f70020, 0x70f70020, 0x70f7001f,
+};
+
+const u16 tbl_iqcal_gainparams[2][9][8] = {
+	{
+		{ 0x000, 0, 0, 2, 0x69, 0x69, 0x69, 0x69 },
+		{ 0x700, 7, 0, 0, 0x69, 0x69, 0x69, 0x69 },
+		{ 0x710, 7, 1, 0, 0x68, 0x68, 0x68, 0x68 },
+		{ 0x720, 7, 2, 0, 0x67, 0x67, 0x67, 0x67 },
+		{ 0x730, 7, 3, 0, 0x66, 0x66, 0x66, 0x66 },
+		{ 0x740, 7, 4, 0, 0x65, 0x65, 0x65, 0x65 },
+		{ 0x741, 7, 4, 1, 0x65, 0x65, 0x65, 0x65 },
+		{ 0x742, 7, 4, 2, 0x65, 0x65, 0x65, 0x65 },
+		{ 0x743, 7, 4, 3, 0x65, 0x65, 0x65, 0x65 }
+	},
+	{
+		{ 0x000, 7, 0, 0, 0x79, 0x79, 0x79, 0x79 },
+		{ 0x700, 7, 0, 0, 0x79, 0x79, 0x79, 0x79 },
+		{ 0x710, 7, 1, 0, 0x79, 0x79, 0x79, 0x79 },
+		{ 0x720, 7, 2, 0, 0x78, 0x78, 0x78, 0x78 },
+		{ 0x730, 7, 3, 0, 0x78, 0x78, 0x78, 0x78 },
+		{ 0x740, 7, 4, 0, 0x78, 0x78, 0x78, 0x78 },
+		{ 0x741, 7, 4, 1, 0x78, 0x78, 0x78, 0x78 },
+		{ 0x742, 7, 4, 2, 0x78, 0x78, 0x78, 0x78 },
+		{ 0x743, 7, 4, 3, 0x78, 0x78, 0x78, 0x78 }
+	}
+};
+
+const struct nphy_txiqcal_ladder ladder_lo[] = {
+	{ 3, 0 },
+	{ 4, 0 },
+	{ 6, 0 },
+	{ 9, 0 },
+	{ 13, 0 },
+	{ 18, 0 },
+	{ 25, 0 },
+	{ 25, 1 },
+	{ 25, 2 },
+	{ 25, 3 },
+	{ 25, 4 },
+	{ 25, 5 },
+	{ 25, 6 },
+	{ 25, 7 },
+	{ 35, 7 },
+	{ 50, 7 },
+	{ 71, 7 },
+	{ 100, 7 }
+};
+
+const struct nphy_txiqcal_ladder ladder_iq[] = {
+	{ 3, 0 },
+	{ 4, 0 },
+	{ 6, 0 },
+	{ 9, 0 },
+	{ 13, 0 },
+	{ 18, 0 },
+	{ 25, 0 },
+	{ 35, 0 },
+	{ 50, 0 },
+	{ 71, 0 },
+	{ 100, 0 },
+	{ 100, 1 },
+	{ 100, 2 },
+	{ 100, 3 },
+	{ 100, 4 },
+	{ 100, 5 },
+	{ 100, 6 },
+	{ 100, 7 }
+};
+
+const u16 loscale[] = {
+	256, 256, 271, 271,
+	287, 256, 256, 271,
+	271, 287, 287, 304,
+	304, 256, 256, 271,
+	271, 287, 287, 304,
+	304, 322, 322, 341,
+	341, 362, 362, 383,
+	383, 256, 256, 271,
+	271, 287, 287, 304,
+	304, 322, 322, 256,
+	256, 271, 271, 287,
+	287, 304, 304, 322,
+	322, 341, 341, 362,
+	362, 256, 256, 271,
+	271, 287, 287, 304,
+	304, 322, 322, 256,
+	256, 271, 271, 287,
+	287, 304, 304, 322,
+	322, 341, 341, 362,
+	362, 256, 256, 271,
+	271, 287, 287, 304,
+	304, 322, 322, 341,
+	341, 362, 362, 383,
+	383, 406, 406, 430,
+	430, 455, 455, 482,
+	482, 511, 511, 541,
+	541, 573, 573, 607,
+	607, 643, 643, 681,
+	681, 722, 722, 764,
+	764, 810, 810, 858,
+	858, 908, 908, 962,
+	962, 1019, 1019, 256
+};
+
+const u16 tbl_tx_iqlo_cal_loft_ladder_40[] = {
+	0x0200, 0x0300, 0x0400, 0x0700,
+	0x0900, 0x0c00, 0x1200, 0x1201,
+	0x1202, 0x1203, 0x1204, 0x1205,
+	0x1206, 0x1207, 0x1907, 0x2307,
+	0x3207, 0x4707
+};
+
+const u16 tbl_tx_iqlo_cal_loft_ladder_20[] = {
+	0x0300, 0x0500, 0x0700, 0x0900,
+	0x0d00, 0x1100, 0x1900, 0x1901,
+	0x1902, 0x1903, 0x1904, 0x1905,
+	0x1906, 0x1907, 0x2407, 0x3207,
+	0x4607, 0x6407
+};
+
+const u16 tbl_tx_iqlo_cal_iqimb_ladder_40[] = {
+	0x0100, 0x0200, 0x0400, 0x0700,
+	0x0900, 0x0c00, 0x1200, 0x1900,
+	0x2300, 0x3200, 0x4700, 0x4701,
+	0x4702, 0x4703, 0x4704, 0x4705,
+	0x4706, 0x4707
+};
+
+const u16 tbl_tx_iqlo_cal_iqimb_ladder_20[] = {
+	0x0200, 0x0300, 0x0600, 0x0900,
+	0x0d00, 0x1100, 0x1900, 0x2400,
+	0x3200, 0x4600, 0x6400, 0x6401,
+	0x6402, 0x6403, 0x6404, 0x6405,
+	0x6406, 0x6407
+};
+
+const u16 tbl_tx_iqlo_cal_startcoefs_nphyrev3[B43_NTAB_TX_IQLO_CAL_STARTCOEFS_REV3] = { };
+
+const u16 tbl_tx_iqlo_cal_startcoefs[B43_NTAB_TX_IQLO_CAL_STARTCOEFS] = { };
+
+const u16 tbl_tx_iqlo_cal_cmds_recal_nphyrev3[] = {
+	0x8423, 0x8323, 0x8073, 0x8256,
+	0x8045, 0x8223, 0x9423, 0x9323,
+	0x9073, 0x9256, 0x9045, 0x9223
+};
+
+const u16 tbl_tx_iqlo_cal_cmds_recal[] = {
+	0x8101, 0x8253, 0x8053, 0x8234,
+	0x8034, 0x9101, 0x9253, 0x9053,
+	0x9234, 0x9034
+};
+
+const u16 tbl_tx_iqlo_cal_cmds_fullcal[] = {
+	0x8123, 0x8264, 0x8086, 0x8245,
+	0x8056, 0x9123, 0x9264, 0x9086,
+	0x9245, 0x9056
+};
+
+const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
+	0x8434, 0x8334, 0x8084, 0x8267,
+	0x8056, 0x8234, 0x9434, 0x9334,
+	0x9084, 0x9267, 0x9056, 0x9234
+};
+
 static inline void assert_ntab_array_sizes(void)
 {
 #undef check
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index f6753c4b96b2..51636d02f8b1 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -131,9 +131,46 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel);
 #define B43_NTAB_C1_LOFEEDTH		B43_NTAB16(0x1B, 0x1C0) /* Local Oscillator Feed Through Lookup Table Core 1 */
 #define B43_NTAB_C1_LOFEEDTH_SIZE	128
 
+#define B43_NTAB_TX_IQLO_CAL_LOFT_LADDER_40_SIZE	18
+#define B43_NTAB_TX_IQLO_CAL_LOFT_LADDER_20_SIZE	18
+#define B43_NTAB_TX_IQLO_CAL_IQIMB_LADDER_40_SIZE	18
+#define B43_NTAB_TX_IQLO_CAL_IQIMB_LADDER_20_SIZE	18
+#define B43_NTAB_TX_IQLO_CAL_STARTCOEFS_REV3		11
+#define B43_NTAB_TX_IQLO_CAL_STARTCOEFS			9
+#define B43_NTAB_TX_IQLO_CAL_CMDS_RECAL_REV3		12
+#define B43_NTAB_TX_IQLO_CAL_CMDS_RECAL			10
+#define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL		10
+#define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL_REV3		12
+
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
 
 void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev);
 void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev);
 
+extern const u32 b43_ntab_tx_gain_rev0_1_2[];
+extern const u32 b43_ntab_tx_gain_rev3plus_2ghz[];
+extern const u32 b43_ntab_tx_gain_rev3_5ghz[];
+extern const u32 b43_ntab_tx_gain_rev4_5ghz[];
+extern const u32 b43_ntab_tx_gain_rev5plus_5ghz[];
+
+extern const u32 txpwrctrl_tx_gain_ipa[];
+extern const u32 txpwrctrl_tx_gain_ipa_rev5[];
+extern const u32 txpwrctrl_tx_gain_ipa_rev6[];
+extern const u32 txpwrctrl_tx_gain_ipa_5g[];
+extern const u16 tbl_iqcal_gainparams[2][9][8];
+extern const struct nphy_txiqcal_ladder ladder_lo[];
+extern const struct nphy_txiqcal_ladder ladder_iq[];
+extern const u16 loscale[];
+
+extern const u16 tbl_tx_iqlo_cal_loft_ladder_40[];
+extern const u16 tbl_tx_iqlo_cal_loft_ladder_20[];
+extern const u16 tbl_tx_iqlo_cal_iqimb_ladder_40[];
+extern const u16 tbl_tx_iqlo_cal_iqimb_ladder_20[];
+extern const u16 tbl_tx_iqlo_cal_startcoefs_nphyrev3[];
+extern const u16 tbl_tx_iqlo_cal_startcoefs[];
+extern const u16 tbl_tx_iqlo_cal_cmds_recal_nphyrev3[];
+extern const u16 tbl_tx_iqlo_cal_cmds_recal[];
+extern const u16 tbl_tx_iqlo_cal_cmds_fullcal[];
+extern const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[];
+
 #endif /* B43_TABLES_NPHY_H_ */
-- 
cgit v1.2.3


From 0988a7a1a98300e90a6613b33738e07cdf8ce786 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 13:27:29 +0100
Subject: b43: N-PHY: update init code to match current specs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Previous init path was based on old specs from old driver. Update it
as much as possible leaving some TODOs for not implemented functions.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 201 +++++++++++++++++++++++++++++++--------
 1 file changed, 161 insertions(+), 40 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index cb784a2504a6..c16c98538f65 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -419,75 +419,196 @@ static void b43_nphy_rssi_cal(struct b43_wldev *dev, u8 type)
 	//TODO
 }
 
+/*
+ * Init N-PHY
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
+ */
 int b43_phy_initn(struct b43_wldev *dev)
 {
+	struct ssb_bus *bus = dev->dev->bus;
 	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = phy->n;
+	u8 tx_pwr_state;
+	struct nphy_txgains target;
 	u16 tmp;
+	enum ieee80211_band tmp2;
+	bool do_rssi_cal;
+
+	u16 clip[2];
+	bool do_cal = false;
 
-	//TODO: Spectral management
+	if ((dev->phy.rev >= 3) &&
+	   (bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
+	   (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) {
+		chipco_set32(&dev->dev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40);
+	}
+	nphy->deaf_count = 0;
 	b43_nphy_tables_init(dev);
+	nphy->crsminpwr_adjusted = false;
+	nphy->noisevars_adjusted = false;
 
 	/* Clear all overrides */
-	b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
+	if (dev->phy.rev >= 3) {
+		b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, 0);
+		b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
+		b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, 0);
+		b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, 0);
+	} else {
+		b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
+	}
 	b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, 0);
 	b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, 0);
-	b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0);
-	b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0);
+	if (dev->phy.rev < 6) {
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0);
+	}
 	b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
 		     ~(B43_NPHY_RFSEQMODE_CAOVER |
 		       B43_NPHY_RFSEQMODE_TROVER));
+	if (dev->phy.rev >= 3)
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, 0);
 	b43_phy_write(dev, B43_NPHY_AFECTL_OVER, 0);
 
-	tmp = (phy->rev < 2) ? 64 : 59;
-	b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
-			~B43_NPHY_BPHY_CTL3_SCALE,
-			tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT);
-
+	if (dev->phy.rev <= 2) {
+		tmp = (dev->phy.rev == 2) ? 0x3B : 0x40;
+		b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
+				~B43_NPHY_BPHY_CTL3_SCALE,
+				tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT);
+	}
 	b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20);
 	b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20);
 
-	b43_phy_write(dev, B43_NPHY_TXREALFD, 184);
-	b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 200);
-	b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 80);
-	b43_phy_write(dev, B43_NPHY_C2_BCLIPBKOFF, 511);
+	if (bus->sprom.boardflags2_lo & 0x100 ||
+	    (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
+	     bus->boardinfo.type == 0x8B))
+		b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0);
+	else
+		b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8);
+	b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 0xC8);
+	b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x50);
+	b43_phy_write(dev, B43_NPHY_TXRIFS_FRDEL, 0x30);
 
-	//TODO MIMO-Config
-	//TODO Update TX/RX chain
+	/* TODO MIMO-Config */
+	/* TODO Update TX/RX chain */
 
 	if (phy->rev < 2) {
 		b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8);
 		b43_phy_write(dev, B43_NPHY_DUP40_BL, 0x9A4);
 	}
+
+	tmp2 = b43_current_band(dev->wl);
+	if ((nphy->ipa2g_on && tmp2 == IEEE80211_BAND_2GHZ) ||
+	    (nphy->ipa5g_on && tmp2 == IEEE80211_BAND_5GHZ)) {
+		b43_phy_set(dev, B43_NPHY_PAPD_EN0, 0x1);
+		b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ0, 0x007F,
+				nphy->papd_epsilon_offset[0] << 7);
+		b43_phy_set(dev, B43_NPHY_PAPD_EN1, 0x1);
+		b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ1, 0x007F,
+				nphy->papd_epsilon_offset[1] << 7);
+		/* TODO N PHY IPA Set TX Dig Filters */
+	} else if (phy->rev >= 5) {
+		/* TODO N PHY Ext PA Set TX Dig Filters */
+	}
+
 	b43_nphy_workarounds(dev);
-	b43_nphy_reset_cca(dev);
 
-	ssb_write32(dev->dev, SSB_TMSLOW,
-		    ssb_read32(dev->dev, SSB_TMSLOW) | B43_TMSLOW_MACPHYCLKEN);
+	/* Reset CCA, in init code it differs a little from standard way */
+	/* b43_nphy_bmac_clock_fgc(dev, 1); */
+	tmp = b43_phy_read(dev, B43_NPHY_BBCFG);
+	b43_phy_write(dev, B43_NPHY_BBCFG, tmp | B43_NPHY_BBCFG_RSTCCA);
+	b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA);
+	/* b43_nphy_bmac_clock_fgc(dev, 0); */
+
+	/* TODO N PHY MAC PHY Clock Set with argument 1 */
+
+	/* b43_nphy_pa_override(dev, false); */
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+	/* b43_nphy_pa_override(dev, true); */
+
+	/* b43_nphy_classifier(dev, 0, 0); */
+	/* b43_nphy_read_clip_detection(dev, clip); */
+	tx_pwr_state = nphy->txpwrctrl;
+	/* TODO N PHY TX power control with argument 0
+		(turning off power control) */
+	/* TODO Fix the TX Power Settings */
+	/* TODO N PHY TX Power Control Idle TSSI */
+	/* TODO N PHY TX Power Control Setup */
+
+	if (phy->rev >= 3) {
+		/* TODO */
+	} else {
+		/* TODO Write an N PHY table with ID 26, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */
+		/* TODO Write an N PHY table with ID 27, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */
+	}
 
-	b43_phy_read(dev, B43_NPHY_CLASSCTL); /* dummy read */
-	//TODO read core1/2 clip1 thres regs
-
-	if (1 /* FIXME Band is 2.4GHz */)
-		b43_nphy_bphy_init(dev);
-	//TODO disable TX power control
-	//TODO Fix the TX power settings
-	//TODO Init periodic calibration with reason 3
-	b43_nphy_rssi_cal(dev, 2);
-	b43_nphy_rssi_cal(dev, 0);
-	b43_nphy_rssi_cal(dev, 1);
-	//TODO get TX gain
-	//TODO init superswitch
-	//TODO calibrate LO
-	//TODO idle TSSI TX pctl
-	//TODO TX power control power setup
-	//TODO table writes
-	//TODO TX power control coefficients
-	//TODO enable TX power control
-	//TODO control antenna selection
-	//TODO init radar detection
-	//TODO reset channel if changed
+	if (nphy->phyrxchain != 3)
+		;/* TODO N PHY RX Core Set State with phyrxchain as argument */
+	if (nphy->mphase_cal_phase_id > 0)
+		;/* TODO PHY Periodic Calibration Multi-Phase Restart */
+
+	do_rssi_cal = false;
+	if (phy->rev >= 3) {
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+			do_rssi_cal = (nphy->rssical_chanspec_2G == 0);
+		else
+			do_rssi_cal = (nphy->rssical_chanspec_5G == 0);
+
+		if (do_rssi_cal)
+			;/* b43_nphy_rssi_cal(dev); */
+		else
+			;/* b43_nphy_restore_rssi_cal(dev); */
+	} else {
+		/* b43_nphy_rssi_cal(dev); */
+	}
+
+	if (!((nphy->measure_hold & 0x6) != 0)) {
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+			do_cal = (nphy->iqcal_chanspec_2G == 0);
+		else
+			do_cal = (nphy->iqcal_chanspec_5G == 0);
+
+		if (nphy->mute)
+			do_cal = false;
+
+		if (do_cal) {
+			/* target = b43_nphy_get_tx_gains(dev); */
+
+			if (nphy->antsel_type == 2)
+				;/*TODO NPHY Superswitch Init with argument 1*/
+			if (nphy->perical != 2) {
+				/* b43_nphy_rssi_cal(dev); */
+				if (phy->rev >= 3) {
+					nphy->cal_orig_pwr_idx[0] =
+					    nphy->txpwrindex[0].index_internal;
+					nphy->cal_orig_pwr_idx[1] =
+					    nphy->txpwrindex[1].index_internal;
+					/* TODO N PHY Pre Calibrate TX Gain */
+					/*target = b43_nphy_get_tx_gains(dev)*/
+				}
+			}
+		}
+	}
+
+	/*
+	if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) {
+		if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
+			Call N PHY Save Cal
+		else if (nphy->mphase_cal_phase_id == 0)
+			N PHY Periodic Calibration with argument 3
+	} else {
+		b43_nphy_restore_cal(dev);
+	}
+	*/
+
+	/* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
+	/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
+	b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
+	b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);
+	if (phy->rev >= 3 && phy->rev <= 6)
+		b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014);
+	/* b43_nphy_tx_lp_fbw(dev); */
+	/* TODO N PHY Spur Workaround */
 
 	b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
 	return 0;
-- 
cgit v1.2.3


From 4a933c8566da3e2b164ea74b1632bf2f43c8ee9b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 13:36:43 +0100
Subject: b43: N-PHY: update CCA reset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index c16c98538f65..c9d2b7738aef 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -343,18 +343,34 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
+static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
+{
+	u32 tmslow;
+
+	if (dev->phy.type != B43_PHYTYPE_N)
+		return;
+
+	tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
+	if (force)
+		tmslow |= SSB_TMSLOW_FGC;
+	else
+		tmslow &= ~SSB_TMSLOW_FGC;
+	ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CCA */
 static void b43_nphy_reset_cca(struct b43_wldev *dev)
 {
 	u16 bbcfg;
 
-	ssb_write32(dev->dev, SSB_TMSLOW,
-		    ssb_read32(dev->dev, SSB_TMSLOW) | SSB_TMSLOW_FGC);
+	b43_nphy_bmac_clock_fgc(dev, 1);
 	bbcfg = b43_phy_read(dev, B43_NPHY_BBCFG);
-	b43_phy_set(dev, B43_NPHY_BBCFG, B43_NPHY_BBCFG_RSTCCA);
-	b43_phy_write(dev, B43_NPHY_BBCFG,
-		      bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
-	ssb_write32(dev->dev, SSB_TMSLOW,
-		    ssb_read32(dev->dev, SSB_TMSLOW) & ~SSB_TMSLOW_FGC);
+	b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg | B43_NPHY_BBCFG_RSTCCA);
+	udelay(1);
+	b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
+	b43_nphy_bmac_clock_fgc(dev, 0);
+	/* TODO: N PHY Force RF Seq with argument 2 */
 }
 
 enum b43_nphy_rf_sequence {
-- 
cgit v1.2.3


From 4cb9977516d0f52a779d12a430ccf263d35802fc Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 13:40:58 +0100
Subject: b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index c9d2b7738aef..30b9dacb666c 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -429,10 +429,31 @@ static void b43_nphy_bphy_init(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
 }
 
-/* RSSI Calibration */
-static void b43_nphy_rssi_cal(struct b43_wldev *dev, u8 type)
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
+static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 {
-	//TODO
+	/* TODO */
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
+static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
+{
+	/* TODO */
+}
+
+/*
+ * RSSI Calibration
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal
+ */
+static void b43_nphy_rssi_cal(struct b43_wldev *dev)
+{
+	if (dev->phy.rev >= 3) {
+		b43_nphy_rev3_rssi_cal(dev);
+	} else {
+		b43_nphy_rev2_rssi_cal(dev, 2);
+		b43_nphy_rev2_rssi_cal(dev, 0);
+		b43_nphy_rev2_rssi_cal(dev, 1);
+	}
 }
 
 /*
@@ -571,11 +592,11 @@ int b43_phy_initn(struct b43_wldev *dev)
 			do_rssi_cal = (nphy->rssical_chanspec_5G == 0);
 
 		if (do_rssi_cal)
-			;/* b43_nphy_rssi_cal(dev); */
+			b43_nphy_rssi_cal(dev);
 		else
 			;/* b43_nphy_restore_rssi_cal(dev); */
 	} else {
-		/* b43_nphy_rssi_cal(dev); */
+		b43_nphy_rssi_cal(dev);
 	}
 
 	if (!((nphy->measure_hold & 0x6) != 0)) {
-- 
cgit v1.2.3


From bbec398c1b7baa1dbde1e49446d1cbf4c6c20fa1 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 14:31:39 +0100
Subject: b43: N-PHY: add clip detection reading/writing and some classifier
 function
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 40 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 30b9dacb666c..72b1c410b7ff 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -28,6 +28,7 @@
 #include "b43.h"
 #include "phy_n.h"
 #include "tables_nphy.h"
+#include "main.h"
 
 struct nphy_txgains {
 	u16 txgm[2];
@@ -373,6 +374,41 @@ static void b43_nphy_reset_cca(struct b43_wldev *dev)
 	/* TODO: N PHY Force RF Seq with argument 2 */
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
+static void b43_nphy_write_clip_detection(struct b43_wldev *dev, u16 *clip_st)
+{
+	b43_phy_write(dev, B43_NPHY_C1_CLIP1THRES, clip_st[0]);
+	b43_phy_write(dev, B43_NPHY_C2_CLIP1THRES, clip_st[1]);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
+static void b43_nphy_read_clip_detection(struct b43_wldev *dev, u16 *clip_st)
+{
+	clip_st[0] = b43_phy_read(dev, B43_NPHY_C1_CLIP1THRES);
+	clip_st[1] = b43_phy_read(dev, B43_NPHY_C2_CLIP1THRES);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/classifier */
+static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
+{
+	u16 tmp;
+
+	if (dev->dev->id.revision == 16)
+		b43_mac_suspend(dev);
+
+	tmp = b43_phy_read(dev, B43_NPHY_CLASSCTL);
+	tmp &= (B43_NPHY_CLASSCTL_CCKEN | B43_NPHY_CLASSCTL_OFDMEN |
+		B43_NPHY_CLASSCTL_WAITEDEN);
+	tmp &= ~mask;
+	tmp |= (val & mask);
+	b43_phy_maskset(dev, B43_NPHY_CLASSCTL, 0xFFF8, tmp);
+
+	if (dev->dev->id.revision == 16)
+		b43_mac_enable(dev);
+
+	return tmp;
+}
+
 enum b43_nphy_rf_sequence {
 	B43_RFSEQ_RX2TX,
 	B43_RFSEQ_TX2RX,
@@ -563,8 +599,8 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
 	/* b43_nphy_pa_override(dev, true); */
 
-	/* b43_nphy_classifier(dev, 0, 0); */
-	/* b43_nphy_read_clip_detection(dev, clip); */
+	b43_nphy_classifier(dev, 0, 0);
+	b43_nphy_read_clip_detection(dev, clip);
 	tx_pwr_state = nphy->txpwrctrl;
 	/* TODO N PHY TX power control with argument 0
 		(turning off power control) */
-- 
cgit v1.2.3


From 3c95627d404e1094313f2dcb87424e2ae462e814 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 14:38:32 +0100
Subject: b43: N-PHY: implement RSSI selection and offset scaling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 121 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 72b1c410b7ff..494c95246954 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -465,6 +465,127 @@ static void b43_nphy_bphy_init(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ScaleOffsetRssi */
+static void b43_nphy_scale_offset_rssi(struct b43_wldev *dev, u16 scale,
+				       s8 offset, u8 core, u8 rail, u8 type)
+{
+	u16 tmp;
+	bool core1or5 = (core == 1) || (core == 5);
+	bool core2or5 = (core == 2) || (core == 5);
+
+	offset = clamp_val(offset, -32, 31);
+	tmp = ((scale & 0x3F) << 8) | (offset & 0x3F);
+
+	if (core1or5 && (rail == 0) && (type == 2))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Z, tmp);
+	if (core1or5 && (rail == 1) && (type == 2))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z, tmp);
+	if (core2or5 && (rail == 0) && (type == 2))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Z, tmp);
+	if (core2or5 && (rail == 1) && (type == 2))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Z, tmp);
+	if (core1or5 && (rail == 0) && (type == 0))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_X, tmp);
+	if (core1or5 && (rail == 1) && (type == 0))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_X, tmp);
+	if (core2or5 && (rail == 0) && (type == 0))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_X, tmp);
+	if (core2or5 && (rail == 1) && (type == 0))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_X, tmp);
+	if (core1or5 && (rail == 0) && (type == 1))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Y, tmp);
+	if (core1or5 && (rail == 1) && (type == 1))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Y, tmp);
+	if (core2or5 && (rail == 0) && (type == 1))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Y, tmp);
+	if (core2or5 && (rail == 1) && (type == 1))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y, tmp);
+	if (core1or5 && (rail == 0) && (type == 6))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_TBD, tmp);
+	if (core1or5 && (rail == 1) && (type == 6))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_TBD, tmp);
+	if (core2or5 && (rail == 0) && (type == 6))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_TBD, tmp);
+	if (core2or5 && (rail == 1) && (type == 6))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TBD, tmp);
+	if (core1or5 && (rail == 0) && (type == 3))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_PWRDET, tmp);
+	if (core1or5 && (rail == 1) && (type == 3))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_PWRDET, tmp);
+	if (core2or5 && (rail == 0) && (type == 3))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_PWRDET, tmp);
+	if (core2or5 && (rail == 1) && (type == 3))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_PWRDET, tmp);
+	if (core1or5 && (type == 4))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_TSSI, tmp);
+	if (core2or5 && (type == 4))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_TSSI, tmp);
+	if (core1or5 && (type == 5))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_TSSI, tmp);
+	if (core2or5 && (type == 5))
+		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TSSI, tmp);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSISel */
+static void b43_nphy_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
+{
+	u16 val;
+
+	if (dev->phy.rev >= 3) {
+		/* TODO */
+	} else {
+		if (type < 3)
+			val = 0;
+		else if (type == 6)
+			val = 1;
+		else if (type == 3)
+			val = 2;
+		else
+			val = 3;
+
+		val = (val << 12) | (val << 14);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, val);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, val);
+
+		if (type < 3) {
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO1, 0xFFCF,
+					(type + 1) << 4);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO2, 0xFFCF,
+					(type + 1) << 4);
+		}
+
+		/* TODO use some definitions */
+		if (code == 0) {
+			b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF, 0);
+			if (type < 3) {
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
+						0xFEC7, 0);
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
+						0xEFDC, 0);
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
+						0xFFFE, 0);
+				udelay(20);
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
+						0xFFFE, 0);
+			}
+		} else {
+			b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF,
+					0x3000);
+			if (type < 3) {
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
+						0xFEC7, 0x0180);
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
+						0xEFDC, (code << 1 | 0x1021));
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
+						0xFFFE, 0x0001);
+				udelay(20);
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
+						0xFFFE, 0);
+			}
+		}
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
 static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 {
-- 
cgit v1.2.3


From dfb4aa5dd0a9b61a6eaa64e9209b2f8839c0a256 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 14:45:13 +0100
Subject: b43: N-PHY: add RSSI polling and setting 2055 (radio) VCM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 96 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 494c95246954..a0e84c428e79 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -586,6 +586,102 @@ static void b43_nphy_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SetRssi2055Vcm */
+static void b43_nphy_set_rssi_2055_vcm(struct b43_wldev *dev, u8 type, u8 *buf)
+{
+	int i;
+	for (i = 0; i < 2; i++) {
+		if (type == 2) {
+			if (i == 0) {
+				b43_radio_maskset(dev, B2055_C1_B0NB_RSSIVCM,
+						  0xFC, buf[0]);
+				b43_radio_maskset(dev, B2055_C1_RX_BB_RSSICTL5,
+						  0xFC, buf[1]);
+			} else {
+				b43_radio_maskset(dev, B2055_C2_B0NB_RSSIVCM,
+						  0xFC, buf[2 * i]);
+				b43_radio_maskset(dev, B2055_C2_RX_BB_RSSICTL5,
+						  0xFC, buf[2 * i + 1]);
+			}
+		} else {
+			if (i == 0)
+				b43_radio_maskset(dev, B2055_C1_RX_BB_RSSICTL5,
+						  0xF3, buf[0] << 2);
+			else
+				b43_radio_maskset(dev, B2055_C2_RX_BB_RSSICTL5,
+						  0xF3, buf[2 * i + 1] << 2);
+		}
+	}
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PollRssi */
+static int b43_nphy_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
+				u8 nsamp)
+{
+	int i;
+	int out;
+	u16 save_regs_phy[9];
+	u16 s[2];
+
+	if (dev->phy.rev >= 3) {
+		save_regs_phy[0] = b43_phy_read(dev,
+						B43_NPHY_RFCTL_LUT_TRSW_UP1);
+		save_regs_phy[1] = b43_phy_read(dev,
+						B43_NPHY_RFCTL_LUT_TRSW_UP2);
+		save_regs_phy[2] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
+		save_regs_phy[3] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
+		save_regs_phy[4] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER1);
+		save_regs_phy[5] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		save_regs_phy[6] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B1S0);
+		save_regs_phy[7] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B32S1);
+	}
+
+	b43_nphy_rssi_select(dev, 5, type);
+
+	if (dev->phy.rev < 2) {
+		save_regs_phy[8] = b43_phy_read(dev, B43_NPHY_GPIO_SEL);
+		b43_phy_write(dev, B43_NPHY_GPIO_SEL, 5);
+	}
+
+	for (i = 0; i < 4; i++)
+		buf[i] = 0;
+
+	for (i = 0; i < nsamp; i++) {
+		if (dev->phy.rev < 2) {
+			s[0] = b43_phy_read(dev, B43_NPHY_GPIO_LOOUT);
+			s[1] = b43_phy_read(dev, B43_NPHY_GPIO_HIOUT);
+		} else {
+			s[0] = b43_phy_read(dev, B43_NPHY_RSSI1);
+			s[1] = b43_phy_read(dev, B43_NPHY_RSSI2);
+		}
+
+		buf[0] += ((s8)((s[0] & 0x3F) << 2)) >> 2;
+		buf[1] += ((s8)(((s[0] >> 8) & 0x3F) << 2)) >> 2;
+		buf[2] += ((s8)((s[1] & 0x3F) << 2)) >> 2;
+		buf[3] += ((s8)(((s[1] >> 8) & 0x3F) << 2)) >> 2;
+	}
+	out = (buf[0] & 0xFF) << 24 | (buf[1] & 0xFF) << 16 |
+		(buf[2] & 0xFF) << 8 | (buf[3] & 0xFF);
+
+	if (dev->phy.rev < 2)
+		b43_phy_write(dev, B43_NPHY_GPIO_SEL, save_regs_phy[8]);
+
+	if (dev->phy.rev >= 3) {
+		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1,
+				save_regs_phy[0]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2,
+				save_regs_phy[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_C1, save_regs_phy[2]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_C2, save_regs_phy[3]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, save_regs_phy[4]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, save_regs_phy[5]);
+		b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, save_regs_phy[6]);
+		b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, save_regs_phy[7]);
+	}
+
+	return out;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
 static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 {
-- 
cgit v1.2.3


From 90b9738d85395d46ffdc961e1a0c80a17e8f4d32 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 14:48:21 +0100
Subject: b43: N-PHY: RSSI calibration for rev < 3
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 157 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 155 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index a0e84c428e79..126c0afa5da2 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -685,7 +685,160 @@ static int b43_nphy_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
 static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 {
-	/* TODO */
+	int i, j;
+	u8 state[4];
+	u8 code, val;
+	u16 class, override;
+	u8 regs_save_radio[2];
+	u16 regs_save_phy[2];
+	s8 offset[4];
+
+	u16 clip_state[2];
+	u16 clip_off[2] = { 0xFFFF, 0xFFFF };
+	s32 results_min[4] = { };
+	u8 vcm_final[4] = { };
+	s32 results[4][4] = { };
+	s32 miniq[4][2] = { };
+
+	if (type == 2) {
+		code = 0;
+		val = 6;
+	} else if (type < 2) {
+		code = 25;
+		val = 4;
+	} else {
+		B43_WARN_ON(1);
+		return;
+	}
+
+	class = b43_nphy_classifier(dev, 0, 0);
+	b43_nphy_classifier(dev, 7, 4);
+	b43_nphy_read_clip_detection(dev, clip_state);
+	b43_nphy_write_clip_detection(dev, clip_off);
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+		override = 0x140;
+	else
+		override = 0x110;
+
+	regs_save_phy[0] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+	regs_save_radio[0] = b43_radio_read16(dev, B2055_C1_PD_RXTX);
+	b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, override);
+	b43_radio_write16(dev, B2055_C1_PD_RXTX, val);
+
+	regs_save_phy[1] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+	regs_save_radio[1] = b43_radio_read16(dev, B2055_C2_PD_RXTX);
+	b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, override);
+	b43_radio_write16(dev, B2055_C2_PD_RXTX, val);
+
+	state[0] = b43_radio_read16(dev, B2055_C1_PD_RSSIMISC) & 0x07;
+	state[1] = b43_radio_read16(dev, B2055_C2_PD_RSSIMISC) & 0x07;
+	b43_radio_mask(dev, B2055_C1_PD_RSSIMISC, 0xF8);
+	b43_radio_mask(dev, B2055_C2_PD_RSSIMISC, 0xF8);
+	state[2] = b43_radio_read16(dev, B2055_C1_SP_RSSI) & 0x07;
+	state[3] = b43_radio_read16(dev, B2055_C2_SP_RSSI) & 0x07;
+
+	b43_nphy_rssi_select(dev, 5, type);
+	b43_nphy_scale_offset_rssi(dev, 0, 0, 5, 0, type);
+	b43_nphy_scale_offset_rssi(dev, 0, 0, 5, 1, type);
+
+	for (i = 0; i < 4; i++) {
+		u8 tmp[4];
+		for (j = 0; j < 4; j++)
+			tmp[j] = i;
+		if (type != 1)
+			b43_nphy_set_rssi_2055_vcm(dev, type, tmp);
+		b43_nphy_poll_rssi(dev, type, results[i], 8);
+		if (type < 2)
+			for (j = 0; j < 2; j++)
+				miniq[i][j] = min(results[i][2 * j],
+						results[i][2 * j + 1]);
+	}
+
+	for (i = 0; i < 4; i++) {
+		s32 mind = 40;
+		u8 minvcm = 0;
+		s32 minpoll = 249;
+		s32 curr;
+		for (j = 0; j < 4; j++) {
+			if (type == 2)
+				curr = abs(results[j][i]);
+			else
+				curr = abs(miniq[j][i / 2] - code * 8);
+
+			if (curr < mind) {
+				mind = curr;
+				minvcm = j;
+			}
+
+			if (results[j][i] < minpoll)
+				minpoll = results[j][i];
+		}
+		results_min[i] = minpoll;
+		vcm_final[i] = minvcm;
+	}
+
+	if (type != 1)
+		b43_nphy_set_rssi_2055_vcm(dev, type, vcm_final);
+
+	for (i = 0; i < 4; i++) {
+		offset[i] = (code * 8) - results[vcm_final[i]][i];
+
+		if (offset[i] < 0)
+			offset[i] = -((abs(offset[i]) + 4) / 8);
+		else
+			offset[i] = (offset[i] + 4) / 8;
+
+		if (results_min[i] == 248)
+			offset[i] = code - 32;
+
+		if (i % 2 == 0)
+			b43_nphy_scale_offset_rssi(dev, 0, offset[i], 1, 0,
+							type);
+		else
+			b43_nphy_scale_offset_rssi(dev, 0, offset[i], 2, 1,
+							type);
+	}
+
+	b43_radio_maskset(dev, B2055_C1_PD_RSSIMISC, 0xF8, state[0]);
+	b43_radio_maskset(dev, B2055_C1_PD_RSSIMISC, 0xF8, state[1]);
+
+	switch (state[2]) {
+	case 1:
+		b43_nphy_rssi_select(dev, 1, 2);
+		break;
+	case 4:
+		b43_nphy_rssi_select(dev, 1, 0);
+		break;
+	case 2:
+		b43_nphy_rssi_select(dev, 1, 1);
+		break;
+	default:
+		b43_nphy_rssi_select(dev, 1, 1);
+		break;
+	}
+
+	switch (state[3]) {
+	case 1:
+		b43_nphy_rssi_select(dev, 2, 2);
+		break;
+	case 4:
+		b43_nphy_rssi_select(dev, 2, 0);
+		break;
+	default:
+		b43_nphy_rssi_select(dev, 2, 1);
+		break;
+	}
+
+	b43_nphy_rssi_select(dev, 0, type);
+
+	b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs_save_phy[0]);
+	b43_radio_write16(dev, B2055_C1_PD_RXTX, regs_save_radio[0]);
+	b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs_save_phy[1]);
+	b43_radio_write16(dev, B2055_C2_PD_RXTX, regs_save_radio[1]);
+
+	b43_nphy_classifier(dev, 7, class);
+	b43_nphy_write_clip_detection(dev, clip_state);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
@@ -867,7 +1020,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 			if (nphy->antsel_type == 2)
 				;/*TODO NPHY Superswitch Init with argument 1*/
 			if (nphy->perical != 2) {
-				/* b43_nphy_rssi_cal(dev); */
+				b43_nphy_rssi_cal(dev);
 				if (phy->rev >= 3) {
 					nphy->cal_orig_pwr_idx[0] =
 					    nphy->txpwrindex[0].index_internal;
-- 
cgit v1.2.3


From e50cbcf6741684753da401722f337efacfa4a98f Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:02:38 +0100
Subject: b43: N-PHY: implement PA overriding (RF control related)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 38 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 126c0afa5da2..0e379427270a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -344,6 +344,40 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PA%20override */
+static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	enum ieee80211_band band;
+	u16 tmp;
+
+	if (!enable) {
+		nphy->rfctrl_intc1_save = b43_phy_read(dev,
+						       B43_NPHY_RFCTL_INTC1);
+		nphy->rfctrl_intc2_save = b43_phy_read(dev,
+						       B43_NPHY_RFCTL_INTC2);
+		band = b43_current_band(dev->wl);
+		if (dev->phy.rev >= 3) {
+			if (band == IEEE80211_BAND_5GHZ)
+				tmp = 0x600;
+			else
+				tmp = 0x480;
+		} else {
+			if (band == IEEE80211_BAND_5GHZ)
+				tmp = 0x180;
+			else
+				tmp = 0x120;
+		}
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, tmp);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, tmp);
+	} else {
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1,
+				nphy->rfctrl_intc1_save);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2,
+				nphy->rfctrl_intc2_save);
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
 static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
 {
@@ -964,10 +998,10 @@ int b43_phy_initn(struct b43_wldev *dev)
 
 	/* TODO N PHY MAC PHY Clock Set with argument 1 */
 
-	/* b43_nphy_pa_override(dev, false); */
+	b43_nphy_pa_override(dev, false);
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
-	/* b43_nphy_pa_override(dev, true); */
+	b43_nphy_pa_override(dev, true);
 
 	b43_nphy_classifier(dev, 0, 0);
 	b43_nphy_read_clip_detection(dev, clip);
-- 
cgit v1.2.3


From 42e1547e5199ebfd41e3fb63db69dac8c4ed8d1c Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:06:47 +0100
Subject: b43: N-PHY: add RSSI calibration restore
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>`
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 45 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 0e379427270a..b0ff3a3aaa7b 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -896,6 +896,49 @@ static void b43_nphy_rssi_cal(struct b43_wldev *dev)
 	}
 }
 
+/*
+ * Restore RSSI Calibration
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreRssiCal
+ */
+static void b43_nphy_restore_rssi_cal(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	u16 *rssical_radio_regs = NULL;
+	u16 *rssical_phy_regs = NULL;
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		if (!nphy->rssical_chanspec_2G)
+			return;
+		rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_2G;
+		rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_2G;
+	} else {
+		if (!nphy->rssical_chanspec_5G)
+			return;
+		rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_5G;
+		rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_5G;
+	}
+
+	/* TODO use some definitions */
+	b43_radio_maskset(dev, 0x602B, 0xE3, rssical_radio_regs[0]);
+	b43_radio_maskset(dev, 0x702B, 0xE3, rssical_radio_regs[1]);
+
+	b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Z, rssical_phy_regs[0]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z, rssical_phy_regs[1]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Z, rssical_phy_regs[2]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Z, rssical_phy_regs[3]);
+
+	b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_X, rssical_phy_regs[4]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_X, rssical_phy_regs[5]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_X, rssical_phy_regs[6]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_X, rssical_phy_regs[7]);
+
+	b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Y, rssical_phy_regs[8]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Y, rssical_phy_regs[9]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Y, rssical_phy_regs[10]);
+	b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y, rssical_phy_regs[11]);
+}
+
 /*
  * Init N-PHY
  * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
@@ -1034,7 +1077,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 		if (do_rssi_cal)
 			b43_nphy_rssi_cal(dev);
 		else
-			;/* b43_nphy_restore_rssi_cal(dev); */
+			b43_nphy_restore_rssi_cal(dev);
 	} else {
 		b43_nphy_rssi_cal(dev);
 	}
-- 
cgit v1.2.3


From 5c1a140afbd3abeec92b74c91ad495cf69af4de3 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:10:54 +0100
Subject: b43: N-PHY: add function than forces (not) staying in carrier search
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index b0ff3a3aaa7b..62ed7b7f6452 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -443,6 +443,29 @@ static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
 	return tmp;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/carriersearch */
+static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = phy->n;
+
+	if (enable) {
+		u16 clip[] = { 0xFFFF, 0xFFFF };
+		if (nphy->deaf_count++ == 0) {
+			nphy->classifier_state = b43_nphy_classifier(dev, 0, 0);
+			b43_nphy_classifier(dev, 0x7, 0);
+			b43_nphy_read_clip_detection(dev, nphy->clip_state);
+			b43_nphy_write_clip_detection(dev, clip);
+		}
+		b43_nphy_reset_cca(dev);
+	} else {
+		if (--nphy->deaf_count == 0) {
+			b43_nphy_classifier(dev, 0x7, nphy->classifier_state);
+			b43_nphy_write_clip_detection(dev, nphy->clip_state);
+		}
+	}
+}
+
 enum b43_nphy_rf_sequence {
 	B43_RFSEQ_RX2TX,
 	B43_RFSEQ_TX2RX,
-- 
cgit v1.2.3


From a67162ab00d5f0d28f58a62ccd48e6a9cab07645 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:16:25 +0100
Subject: b43: N-PHY: implement RX IQ coeffs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 62ed7b7f6452..3232a465e0a5 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -408,6 +408,23 @@ static void b43_nphy_reset_cca(struct b43_wldev *dev)
 	/* TODO: N PHY Force RF Seq with argument 2 */
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqCoeffs */
+static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
+					struct b43_phy_n_iq_comp *pcomp)
+{
+	if (write) {
+		b43_phy_write(dev, B43_NPHY_C1_RXIQ_COMPA0, pcomp->a0);
+		b43_phy_write(dev, B43_NPHY_C1_RXIQ_COMPB0, pcomp->b0);
+		b43_phy_write(dev, B43_NPHY_C2_RXIQ_COMPA1, pcomp->a1);
+		b43_phy_write(dev, B43_NPHY_C2_RXIQ_COMPB1, pcomp->b1);
+	} else {
+		pcomp->a0 = b43_phy_read(dev, B43_NPHY_C1_RXIQ_COMPA0);
+		pcomp->b0 = b43_phy_read(dev, B43_NPHY_C1_RXIQ_COMPB0);
+		pcomp->a1 = b43_phy_read(dev, B43_NPHY_C2_RXIQ_COMPA1);
+		pcomp->b1 = b43_phy_read(dev, B43_NPHY_C2_RXIQ_COMPB1);
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
 static void b43_nphy_write_clip_detection(struct b43_wldev *dev, u16 *clip_st)
 {
-- 
cgit v1.2.3


From 0914640072570f5867818884b8b78c0468b9747f Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:17:10 +0100
Subject: b43: N-PHY: implement workaround for TX IQ
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3232a465e0a5..d67ba207783a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -425,6 +425,22 @@ static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxIqWar */
+static void b43_nphy_tx_iq_workaround(struct b43_wldev *dev)
+{
+	u16 array[4];
+	int i;
+
+	b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x3C50);
+	for (i = 0; i < 4; i++)
+		array[i] = b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_NPHY_TXIQW0, array[0]);
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_NPHY_TXIQW1, array[1]);
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_NPHY_TXIQW2, array[2]);
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_NPHY_TXIQW3, array[3]);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
 static void b43_nphy_write_clip_detection(struct b43_wldev *dev, u16 *clip_st)
 {
-- 
cgit v1.2.3


From 2f258b74d13c200944ef018c71ed9d9a7d4da0b0 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:18:35 +0100
Subject: b43: N-PHY: implement restoring general configuration
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 90 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d67ba207783a..68c1582db712 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -995,6 +995,96 @@ static void b43_nphy_restore_rssi_cal(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y, rssical_phy_regs[11]);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetIpaGainTbl */
+static const u32 *b43_nphy_get_ipa_gain_table(struct b43_wldev *dev)
+{
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		if (dev->phy.rev >= 6) {
+			/* TODO If the chip is 47162
+				return txpwrctrl_tx_gain_ipa_rev5 */
+			return txpwrctrl_tx_gain_ipa_rev6;
+		} else if (dev->phy.rev >= 5) {
+			return txpwrctrl_tx_gain_ipa_rev5;
+		} else {
+			return txpwrctrl_tx_gain_ipa;
+		}
+	} else {
+		return txpwrctrl_tx_gain_ipa_5g;
+	}
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal */
+static void b43_nphy_restore_cal(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	u16 coef[4];
+	u16 *loft = NULL;
+	u16 *table = NULL;
+
+	int i;
+	u16 *txcal_radio_regs = NULL;
+	struct b43_phy_n_iq_comp *rxcal_coeffs = NULL;
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		if (nphy->iqcal_chanspec_2G == 0)
+			return;
+		table = nphy->cal_cache.txcal_coeffs_2G;
+		loft = &nphy->cal_cache.txcal_coeffs_2G[5];
+	} else {
+		if (nphy->iqcal_chanspec_5G == 0)
+			return;
+		table = nphy->cal_cache.txcal_coeffs_5G;
+		loft = &nphy->cal_cache.txcal_coeffs_5G[5];
+	}
+
+	/* TODO: Write an N PHY table with ID 15, length 4, offset 80,
+		width 16, and data from table */
+
+	for (i = 0; i < 4; i++) {
+		if (dev->phy.rev >= 3)
+			table[i] = coef[i];
+		else
+			coef[i] = 0;
+	}
+
+	/* TODO: Write an N PHY table with ID 15, length 4, offset 88,
+		width 16, and data from coef */
+	/* TODO: Write an N PHY table with ID 15, length 2, offset 85,
+		width 16 and data from loft */
+	/* TODO: Write an N PHY table with ID 15, length 2, offset 93,
+		width 16 and data from loft */
+
+	if (dev->phy.rev < 2)
+		b43_nphy_tx_iq_workaround(dev);
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		txcal_radio_regs = nphy->cal_cache.txcal_radio_regs_2G;
+		rxcal_coeffs = &nphy->cal_cache.rxcal_coeffs_2G;
+	} else {
+		txcal_radio_regs = nphy->cal_cache.txcal_radio_regs_5G;
+		rxcal_coeffs = &nphy->cal_cache.rxcal_coeffs_5G;
+	}
+
+	/* TODO use some definitions */
+	if (dev->phy.rev >= 3) {
+		b43_radio_write(dev, 0x2021, txcal_radio_regs[0]);
+		b43_radio_write(dev, 0x2022, txcal_radio_regs[1]);
+		b43_radio_write(dev, 0x3021, txcal_radio_regs[2]);
+		b43_radio_write(dev, 0x3022, txcal_radio_regs[3]);
+		b43_radio_write(dev, 0x2023, txcal_radio_regs[4]);
+		b43_radio_write(dev, 0x2024, txcal_radio_regs[5]);
+		b43_radio_write(dev, 0x3023, txcal_radio_regs[6]);
+		b43_radio_write(dev, 0x3024, txcal_radio_regs[7]);
+	} else {
+		b43_radio_write(dev, 0x8B, txcal_radio_regs[0]);
+		b43_radio_write(dev, 0xBA, txcal_radio_regs[1]);
+		b43_radio_write(dev, 0x8D, txcal_radio_regs[2]);
+		b43_radio_write(dev, 0xBC, txcal_radio_regs[3]);
+	}
+	b43_nphy_rx_iq_coeffs(dev, true, rxcal_coeffs);
+}
+
 /*
  * Init N-PHY
  * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
-- 
cgit v1.2.3


From 2faa6b832fb44b1910fe668a4ae127a69e998936 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:26:12 +0100
Subject: b43: N-PHY: implement RX IQ estimation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 68c1582db712..776d0082ef1c 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -408,6 +408,45 @@ static void b43_nphy_reset_cca(struct b43_wldev *dev)
 	/* TODO: N PHY Force RF Seq with argument 2 */
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqEst */
+static void b43_nphy_rx_iq_est(struct b43_wldev *dev, struct nphy_iq_est *est,
+				u16 samps, u8 time, bool wait)
+{
+	int i;
+	u16 tmp;
+
+	b43_phy_write(dev, B43_NPHY_IQEST_SAMCNT, samps);
+	b43_phy_maskset(dev, B43_NPHY_IQEST_WT, ~B43_NPHY_IQEST_WT_VAL, time);
+	if (wait)
+		b43_phy_set(dev, B43_NPHY_IQEST_CMD, B43_NPHY_IQEST_CMD_MODE);
+	else
+		b43_phy_mask(dev, B43_NPHY_IQEST_CMD, ~B43_NPHY_IQEST_CMD_MODE);
+
+	b43_phy_set(dev, B43_NPHY_IQEST_CMD, B43_NPHY_IQEST_CMD_START);
+
+	for (i = 1000; i; i--) {
+		tmp = b43_phy_read(dev, B43_NPHY_IQEST_CMD);
+		if (!(tmp & B43_NPHY_IQEST_CMD_START)) {
+			est->i0_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_IPACC_HI0) << 16) |
+					b43_phy_read(dev, B43_NPHY_IQEST_IPACC_LO0);
+			est->q0_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_QPACC_HI0) << 16) |
+					b43_phy_read(dev, B43_NPHY_IQEST_QPACC_LO0);
+			est->iq0_prod = (b43_phy_read(dev, B43_NPHY_IQEST_IQACC_HI0) << 16) |
+					b43_phy_read(dev, B43_NPHY_IQEST_IQACC_LO0);
+
+			est->i1_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_IPACC_HI1) << 16) |
+					b43_phy_read(dev, B43_NPHY_IQEST_IPACC_LO1);
+			est->q1_pwr = (b43_phy_read(dev, B43_NPHY_IQEST_QPACC_HI1) << 16) |
+					b43_phy_read(dev, B43_NPHY_IQEST_QPACC_LO1);
+			est->iq1_prod = (b43_phy_read(dev, B43_NPHY_IQEST_IQACC_HI1) << 16) |
+					b43_phy_read(dev, B43_NPHY_IQEST_IQACC_LO1);
+			return;
+		}
+		udelay(10);
+	}
+	memset(est, 0, sizeof(*est));
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqCoeffs */
 static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
 					struct b43_phy_n_iq_comp *pcomp)
-- 
cgit v1.2.3


From 34a56f2cae865224829d3fa7b8d7ddeee139191f Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:29:05 +0100
Subject: b43: N-PHY: implement calculating RX IQ comp
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 99 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 776d0082ef1c..d08feffdce68 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -464,6 +464,105 @@ static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalcRxIqComp */
+static void b43_nphy_calc_rx_iq_comp(struct b43_wldev *dev, u8 mask)
+{
+	int i;
+	s32 iq;
+	u32 ii;
+	u32 qq;
+	int iq_nbits, qq_nbits;
+	int arsh, brsh;
+	u16 tmp, a, b;
+
+	struct nphy_iq_est est;
+	struct b43_phy_n_iq_comp old;
+	struct b43_phy_n_iq_comp new = { };
+	bool error = false;
+
+	if (mask == 0)
+		return;
+
+	b43_nphy_rx_iq_coeffs(dev, false, &old);
+	b43_nphy_rx_iq_coeffs(dev, true, &new);
+	b43_nphy_rx_iq_est(dev, &est, 0x4000, 32, false);
+	new = old;
+
+	for (i = 0; i < 2; i++) {
+		if (i == 0 && (mask & 1)) {
+			iq = est.iq0_prod;
+			ii = est.i0_pwr;
+			qq = est.q0_pwr;
+		} else if (i == 1 && (mask & 2)) {
+			iq = est.iq1_prod;
+			ii = est.i1_pwr;
+			qq = est.q1_pwr;
+		} else {
+			B43_WARN_ON(1);
+			continue;
+		}
+
+		if (ii + qq < 2) {
+			error = true;
+			break;
+		}
+
+		iq_nbits = fls(abs(iq));
+		qq_nbits = fls(qq);
+
+		arsh = iq_nbits - 20;
+		if (arsh >= 0) {
+			a = -((iq << (30 - iq_nbits)) + (ii >> (1 + arsh)));
+			tmp = ii >> arsh;
+		} else {
+			a = -((iq << (30 - iq_nbits)) + (ii << (-1 - arsh)));
+			tmp = ii << -arsh;
+		}
+		if (tmp == 0) {
+			error = true;
+			break;
+		}
+		a /= tmp;
+
+		brsh = qq_nbits - 11;
+		if (brsh >= 0) {
+			b = (qq << (31 - qq_nbits));
+			tmp = ii >> brsh;
+		} else {
+			b = (qq << (31 - qq_nbits));
+			tmp = ii << -brsh;
+		}
+		if (tmp == 0) {
+			error = true;
+			break;
+		}
+		b = int_sqrt(b / tmp - a * a) - (1 << 10);
+
+		if (i == 0 && (mask & 0x1)) {
+			if (dev->phy.rev >= 3) {
+				new.a0 = a & 0x3FF;
+				new.b0 = b & 0x3FF;
+			} else {
+				new.a0 = b & 0x3FF;
+				new.b0 = a & 0x3FF;
+			}
+		} else if (i == 1 && (mask & 0x2)) {
+			if (dev->phy.rev >= 3) {
+				new.a1 = a & 0x3FF;
+				new.b1 = b & 0x3FF;
+			} else {
+				new.a1 = b & 0x3FF;
+				new.b1 = a & 0x3FF;
+			}
+		}
+	}
+
+	if (error)
+		new = old;
+
+	b43_nphy_rx_iq_coeffs(dev, true, &new);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxIqWar */
 static void b43_nphy_tx_iq_workaround(struct b43_wldev *dev)
 {
-- 
cgit v1.2.3


From b0022e15cc39abebd997fefa18cf3b6e141f76bd Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:40:50 +0100
Subject: b43: N-PHY: implement getting TX gains
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 87 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d08feffdce68..e21526f2f24c 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1151,6 +1151,89 @@ static const u32 *b43_nphy_get_ipa_gain_table(struct b43_wldev *dev)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetTxGain */
+static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	u16 curr_gain[2];
+	struct nphy_txgains target;
+	const u32 *table = NULL;
+
+	if (nphy->txpwrctrl == 0) {
+		int i;
+
+		if (nphy->hang_avoid)
+			b43_nphy_stay_in_carrier_search(dev, true);
+		/* TODO: Read an N PHY Table with ID 7, length 2,
+			offset 0x110, width 16, and curr_gain */
+		if (nphy->hang_avoid)
+			b43_nphy_stay_in_carrier_search(dev, false);
+
+		for (i = 0; i < 2; ++i) {
+			if (dev->phy.rev >= 3) {
+				target.ipa[i] = curr_gain[i] & 0x000F;
+				target.pad[i] = (curr_gain[i] & 0x00F0) >> 4;
+				target.pga[i] = (curr_gain[i] & 0x0F00) >> 8;
+				target.txgm[i] = (curr_gain[i] & 0x7000) >> 12;
+			} else {
+				target.ipa[i] = curr_gain[i] & 0x0003;
+				target.pad[i] = (curr_gain[i] & 0x000C) >> 2;
+				target.pga[i] = (curr_gain[i] & 0x0070) >> 4;
+				target.txgm[i] = (curr_gain[i] & 0x0380) >> 7;
+			}
+		}
+	} else {
+		int i;
+		u16 index[2];
+		index[0] = (b43_phy_read(dev, B43_NPHY_C1_TXPCTL_STAT) &
+			B43_NPHY_TXPCTL_STAT_BIDX) >>
+			B43_NPHY_TXPCTL_STAT_BIDX_SHIFT;
+		index[1] = (b43_phy_read(dev, B43_NPHY_C2_TXPCTL_STAT) &
+			B43_NPHY_TXPCTL_STAT_BIDX) >>
+			B43_NPHY_TXPCTL_STAT_BIDX_SHIFT;
+
+		for (i = 0; i < 2; ++i) {
+			if (dev->phy.rev >= 3) {
+				enum ieee80211_band band =
+					b43_current_band(dev->wl);
+
+				if ((nphy->ipa2g_on &&
+				     band == IEEE80211_BAND_2GHZ) ||
+				    (nphy->ipa5g_on &&
+				     band == IEEE80211_BAND_5GHZ)) {
+					table = b43_nphy_get_ipa_gain_table(dev);
+				} else {
+					if (band == IEEE80211_BAND_5GHZ) {
+						if (dev->phy.rev == 3)
+							table = b43_ntab_tx_gain_rev3_5ghz;
+						else if (dev->phy.rev == 4)
+							table = b43_ntab_tx_gain_rev4_5ghz;
+						else
+							table = b43_ntab_tx_gain_rev5plus_5ghz;
+					} else {
+						table = b43_ntab_tx_gain_rev3plus_2ghz;
+					}
+				}
+
+				target.ipa[i] = (table[index[i]] >> 16) & 0xF;
+				target.pad[i] = (table[index[i]] >> 20) & 0xF;
+				target.pga[i] = (table[index[i]] >> 24) & 0xF;
+				target.txgm[i] = (table[index[i]] >> 28) & 0xF;
+			} else {
+				table = b43_ntab_tx_gain_rev0_1_2;
+
+				target.ipa[i] = (table[index[i]] >> 16) & 0x3;
+				target.pad[i] = (table[index[i]] >> 18) & 0x3;
+				target.pga[i] = (table[index[i]] >> 20) & 0x7;
+				target.txgm[i] = (table[index[i]] >> 23) & 0x7;
+			}
+		}
+	}
+
+	return target;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal */
 static void b43_nphy_restore_cal(struct b43_wldev *dev)
 {
@@ -1376,7 +1459,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 			do_cal = false;
 
 		if (do_cal) {
-			/* target = b43_nphy_get_tx_gains(dev); */
+			target = b43_nphy_get_tx_gains(dev);
 
 			if (nphy->antsel_type == 2)
 				;/*TODO NPHY Superswitch Init with argument 1*/
@@ -1388,7 +1471,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 					nphy->cal_orig_pwr_idx[1] =
 					    nphy->txpwrindex[1].index_internal;
 					/* TODO N PHY Pre Calibrate TX Gain */
-					/*target = b43_nphy_get_tx_gains(dev)*/
+					target = b43_nphy_get_tx_gains(dev);
 				}
 			}
 		}
-- 
cgit v1.2.3


From fe3e46e881daad2c7e3886e767bda90871d5f4d6 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:51:55 +0100
Subject: b43: N-PHY: add TX LP FBW (TX filter 40 related)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index e21526f2f24c..242f16d489fa 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -378,6 +378,28 @@ static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxLpFbw */
+static void b43_nphy_tx_lp_fbw(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u16 tmp;
+	enum ieee80211_band band = b43_current_band(dev->wl);
+	bool ipa = (nphy->ipa2g_on && band == IEEE80211_BAND_2GHZ) ||
+			(nphy->ipa5g_on && band == IEEE80211_BAND_5GHZ);
+
+	if (dev->phy.rev >= 3) {
+		if (ipa) {
+			tmp = 4;
+			b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S2,
+			      (((((tmp << 3) | tmp) << 3) | tmp) << 3) | tmp);
+		}
+
+		tmp = 1;
+		b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S2,
+			      (((((tmp << 3) | tmp) << 3) | tmp) << 3) | tmp);
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
 static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
 {
@@ -1494,7 +1516,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);
 	if (phy->rev >= 3 && phy->rev <= 6)
 		b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014);
-	/* b43_nphy_tx_lp_fbw(dev); */
+	b43_nphy_tx_lp_fbw(dev);
 	/* TODO N PHY Spur Workaround */
 
 	b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
-- 
cgit v1.2.3


From c4a92003b0d02367bb1be94867a79651897e91ed Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 15:55:18 +0100
Subject: b43: N-PHY: add RX radio cores calibration
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 43 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 242f16d489fa..3e587d73619e 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1173,6 +1173,49 @@ static const u32 *b43_nphy_get_ipa_gain_table(struct b43_wldev *dev)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxCalRadioSetup */
+static void b43_nphy_tx_cal_radio_setup(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u16 *save = nphy->tx_rx_cal_radio_saveregs;
+
+	if (dev->phy.rev >= 3) {
+		/* TODO */
+	} else {
+		save[0] = b43_radio_read16(dev, B2055_C1_TX_RF_IQCAL1);
+		b43_radio_write16(dev, B2055_C1_TX_RF_IQCAL1, 0x29);
+
+		save[1] = b43_radio_read16(dev, B2055_C1_TX_RF_IQCAL2);
+		b43_radio_write16(dev, B2055_C1_TX_RF_IQCAL2, 0x54);
+
+		save[2] = b43_radio_read16(dev, B2055_C2_TX_RF_IQCAL1);
+		b43_radio_write16(dev, B2055_C2_TX_RF_IQCAL1, 0x29);
+
+		save[3] = b43_radio_read16(dev, B2055_C2_TX_RF_IQCAL2);
+		b43_radio_write16(dev, B2055_C2_TX_RF_IQCAL2, 0x54);
+
+		save[3] = b43_radio_read16(dev, B2055_C1_PWRDET_RXTX);
+		save[4] = b43_radio_read16(dev, B2055_C2_PWRDET_RXTX);
+
+		if (!(b43_phy_read(dev, B43_NPHY_BANDCTL) &
+		    B43_NPHY_BANDCTL_5GHZ)) {
+			b43_radio_write16(dev, B2055_C1_PWRDET_RXTX, 0x04);
+			b43_radio_write16(dev, B2055_C2_PWRDET_RXTX, 0x04);
+		} else {
+			b43_radio_write16(dev, B2055_C1_PWRDET_RXTX, 0x20);
+			b43_radio_write16(dev, B2055_C2_PWRDET_RXTX, 0x20);
+		}
+
+		if (dev->phy.rev < 2) {
+			b43_radio_set(dev, B2055_C1_TX_BB_MXGM, 0x20);
+			b43_radio_set(dev, B2055_C2_TX_BB_MXGM, 0x20);
+		} else {
+			b43_radio_mask(dev, B2055_C1_TX_BB_MXGM, ~0x20);
+			b43_radio_mask(dev, B2055_C2_TX_BB_MXGM, ~0x20);
+		}
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetTxGain */
 static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 {
-- 
cgit v1.2.3


From de7ed0c6245276eaa62523ffb36512d88bf1efb3 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 16:06:35 +0100
Subject: b43: N-PHY: update TX calibration ladder
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3e587d73619e..d09a16f76007 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1216,6 +1216,31 @@ static void b43_nphy_tx_cal_radio_setup(struct b43_wldev *dev)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/UpdateTxCalLadder */
+static void b43_nphy_update_tx_cal_ladder(struct b43_wldev *dev, u16 core)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	int i;
+	u16 scale, entry;
+
+	u16 tmp = nphy->txcal_bbmult;
+	if (core == 0)
+		tmp >>= 8;
+	tmp &= 0xff;
+
+	for (i = 0; i < 18; i++) {
+		scale = (ladder_lo[i].percent * tmp) / 100;
+		entry = ((scale & 0xFF) << 8) | ladder_lo[i].g_env;
+		/* TODO: Write an N PHY Table with ID 15, length 1,
+			offset i, width 16, and data entry */
+
+		scale = (ladder_iq[i].percent * tmp) / 100;
+		entry = ((scale & 0xFF) << 8) | ladder_iq[i].g_env;
+		/* TODO: Write an N PHY Table with ID 15, length 1,
+			offset i + 32, width 16, and data entry */
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetTxGain */
 static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 {
-- 
cgit v1.2.3


From e9762492f5c7176660ed030e9dd816b3208def12 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 16:08:25 +0100
Subject: b43: N-PHY: implement calculating IQ gain params
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d09a16f76007..8a3bc2c58a81 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1216,6 +1216,44 @@ static void b43_nphy_tx_cal_radio_setup(struct b43_wldev *dev)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/IqCalGainParams */
+static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core,
+					struct nphy_txgains target,
+					struct nphy_iqcal_params *params)
+{
+	int i, j, indx;
+	u16 gain;
+
+	if (dev->phy.rev >= 3) {
+		params->txgm = target.txgm[core];
+		params->pga = target.pga[core];
+		params->pad = target.pad[core];
+		params->ipa = target.ipa[core];
+		params->cal_gain = (params->txgm << 12) | (params->pga << 8) |
+					(params->pad << 4) | (params->ipa);
+		for (j = 0; j < 5; j++)
+			params->ncorr[j] = 0x79;
+	} else {
+		gain = (target.pad[core]) | (target.pga[core] << 4) |
+			(target.txgm[core] << 8);
+
+		indx = (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ?
+			1 : 0;
+		for (i = 0; i < 9; i++)
+			if (tbl_iqcal_gainparams[indx][i][0] == gain)
+				break;
+		i = min(i, 8);
+
+		params->txgm = tbl_iqcal_gainparams[indx][i][1];
+		params->pga = tbl_iqcal_gainparams[indx][i][2];
+		params->pad = tbl_iqcal_gainparams[indx][i][3];
+		params->cal_gain = (params->txgm << 7) | (params->pga << 4) |
+					(params->pad << 2);
+		for (j = 0; j < 4; j++)
+			params->ncorr[j] = tbl_iqcal_gainparams[indx][i][4 + j];
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/UpdateTxCalLadder */
 static void b43_nphy_update_tx_cal_ladder(struct b43_wldev *dev, u16 core)
 {
-- 
cgit v1.2.3


From fb43b8e23519f853f142202bb341c21382f39070 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 16:10:48 +0100
Subject: b43: N-PHY: add huge calculating TX IQ LO
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 226 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 226 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8a3bc2c58a81..4111a4626001 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1434,6 +1434,232 @@ static void b43_nphy_restore_cal(struct b43_wldev *dev)
 	b43_nphy_rx_iq_coeffs(dev, true, rxcal_coeffs);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalTxIqlo */
+static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
+				struct nphy_txgains target,
+				bool full, bool mphase)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	int i;
+	int error = 0;
+	int freq;
+	bool avoid = false;
+	u8 length;
+	u16 tmp, core, type, count, max, numb, last, cmd;
+	const u16 *table;
+	bool phy6or5x;
+
+	u16 buffer[11];
+	u16 diq_start = 0;
+	u16 save[2];
+	u16 gain[2];
+	struct nphy_iqcal_params params[2];
+	bool updated[2] = { };
+
+	b43_nphy_stay_in_carrier_search(dev, true);
+
+	if (dev->phy.rev >= 4) {
+		avoid = nphy->hang_avoid;
+		nphy->hang_avoid = 0;
+	}
+
+	/* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
+		width 16, and data pointer save */
+
+	for (i = 0; i < 2; i++) {
+		b43_nphy_iq_cal_gain_params(dev, i, target, &params[i]);
+		gain[i] = params[i].cal_gain;
+	}
+	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
+		width 16, and data pointer gain */
+
+	b43_nphy_tx_cal_radio_setup(dev);
+	/* TODO: Call N PHY TX Cal PHY Setup */
+
+	phy6or5x = dev->phy.rev >= 6 ||
+		(dev->phy.rev == 5 && nphy->ipa2g_on &&
+		b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ);
+	if (phy6or5x) {
+		/* TODO */
+	}
+
+	b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AA9);
+
+	if (1 /* FIXME: the band width is 20 MHz */)
+		freq = 2500;
+	else
+		freq = 5000;
+
+	if (nphy->mphase_cal_phase_id > 2)
+		;/* TODO: Call N PHY Run Samples with (band width * 8),
+			0xFFFF, 0, 1, 0 as arguments */
+	else
+		;/* TODO: Call N PHY TX Tone with freq, 250, 1, 0 as arguments
+			and save result as error */
+
+	if (error == 0) {
+		if (nphy->mphase_cal_phase_id > 2) {
+			table = nphy->mphase_txcal_bestcoeffs;
+			length = 11;
+			if (dev->phy.rev < 3)
+				length -= 2;
+		} else {
+			if (!full && nphy->txiqlocal_coeffsvalid) {
+				table = nphy->txiqlocal_bestc;
+				length = 11;
+				if (dev->phy.rev < 3)
+					length -= 2;
+			} else {
+				full = true;
+				if (dev->phy.rev >= 3) {
+					table = tbl_tx_iqlo_cal_startcoefs_nphyrev3;
+					length = B43_NTAB_TX_IQLO_CAL_STARTCOEFS_REV3;
+				} else {
+					table = tbl_tx_iqlo_cal_startcoefs;
+					length = B43_NTAB_TX_IQLO_CAL_STARTCOEFS;
+				}
+			}
+		}
+
+		/* TODO: Write an N PHY Table with ID 15, length from above,
+			offset 64, width 16, and the data pointer from above */
+
+		if (full) {
+			if (dev->phy.rev >= 3)
+				max = B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL_REV3;
+			else
+				max = B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL;
+		} else {
+			if (dev->phy.rev >= 3)
+				max = B43_NTAB_TX_IQLO_CAL_CMDS_RECAL_REV3;
+			else
+				max = B43_NTAB_TX_IQLO_CAL_CMDS_RECAL;
+		}
+
+		if (mphase) {
+			count = nphy->mphase_txcal_cmdidx;
+			numb = min(max,
+				(u16)(count + nphy->mphase_txcal_numcmds));
+		} else {
+			count = 0;
+			numb = max;
+		}
+
+		for (; count < numb; count++) {
+			if (full) {
+				if (dev->phy.rev >= 3)
+					cmd = tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[count];
+				else
+					cmd = tbl_tx_iqlo_cal_cmds_fullcal[count];
+			} else {
+				if (dev->phy.rev >= 3)
+					cmd = tbl_tx_iqlo_cal_cmds_recal_nphyrev3[count];
+				else
+					cmd = tbl_tx_iqlo_cal_cmds_recal[count];
+			}
+
+			core = (cmd & 0x3000) >> 12;
+			type = (cmd & 0x0F00) >> 8;
+
+			if (phy6or5x && updated[core] == 0) {
+				b43_nphy_update_tx_cal_ladder(dev, core);
+				updated[core] = 1;
+			}
+
+			tmp = (params[core].ncorr[type] << 8) | 0x66;
+			b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDNNUM, tmp);
+
+			if (type == 1 || type == 3 || type == 4) {
+				/* TODO: Read an N PHY Table with ID 15,
+					length 1, offset 69 + core,
+					width 16, and data pointer buffer */
+				diq_start = buffer[0];
+				buffer[0] = 0;
+				/* TODO: Write an N PHY Table with ID 15,
+					length 1, offset 69 + core, width 16,
+					and data of 0 */
+			}
+
+			b43_phy_write(dev, B43_NPHY_IQLOCAL_CMD, cmd);
+			for (i = 0; i < 2000; i++) {
+				tmp = b43_phy_read(dev, B43_NPHY_IQLOCAL_CMD);
+				if (tmp & 0xC000)
+					break;
+				udelay(10);
+			}
+
+			/* TODO: Read an N PHY Table with ID 15,
+				length table_length, offset 96, width 16,
+				and data pointer buffer */
+			/* TODO: Write an N PHY Table with ID 15,
+				length table_length, offset 64, width 16,
+				and data pointer buffer */
+
+			if (type == 1 || type == 3 || type == 4)
+				buffer[0] = diq_start;
+		}
+
+		if (mphase)
+			nphy->mphase_txcal_cmdidx = (numb >= max) ? 0 : numb;
+
+		last = (dev->phy.rev < 3) ? 6 : 7;
+
+		if (!mphase || nphy->mphase_cal_phase_id == last) {
+			/* TODO: Write an N PHY Table with ID 15, length 4,
+				offset 96, width 16, and data pointer buffer */
+			/* TODO: Read an N PHY Table with ID 15, length 4,
+				offset 80, width 16, and data pointer buffer */
+			if (dev->phy.rev < 3) {
+				buffer[0] = 0;
+				buffer[1] = 0;
+				buffer[2] = 0;
+				buffer[3] = 0;
+			}
+			/* TODO: Write an N PHY Table with ID 15, length 4,
+				offset 88, width 16, and data pointer buffer */
+			/* TODO: Read an N PHY Table with ID 15, length 2,
+				offset 101, width 16, and data pointer buffer*/
+			/* TODO: Write an N PHY Table with ID 15, length 2,
+				offset 85, width 16, and data pointer buffer */
+			/* TODO: Write an N PHY Table with ID 15, length 2,
+				offset 93, width 16, and data pointer buffer */
+			length = 11;
+			if (dev->phy.rev < 3)
+				length -= 2;
+			/* TODO: Read an N PHY Table with ID 15, length length,
+				offset 96, width 16, and data pointer
+				nphy->txiqlocal_bestc */
+			nphy->txiqlocal_coeffsvalid = true;
+			/* TODO: Set nphy->txiqlocal_chanspec to
+				the current channel */
+		} else {
+			length = 11;
+			if (dev->phy.rev < 3)
+				length -= 2;
+			/* TODO: Read an N PHY Table with ID 5, length length,
+				offset 96, width 16, and data pointer
+				nphy->mphase_txcal_bestcoeffs */
+		}
+
+		/* TODO: Call N PHY Stop Playback */
+		b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0);
+	}
+
+	/* TODO: Call N PHY TX Cal PHY Cleanup */
+	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
+		width 16, and data from save */
+
+	if (dev->phy.rev < 2 && (!mphase || nphy->mphase_cal_phase_id == last))
+		b43_nphy_tx_iq_workaround(dev);
+
+	if (dev->phy.rev >= 4)
+		nphy->hang_avoid = avoid;
+
+	b43_nphy_stay_in_carrier_search(dev, false);
+
+	return error;
+}
+
 /*
  * Init N-PHY
  * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
-- 
cgit v1.2.3


From 15931e318b27e85ea06f44d53abc3d3e6a3fc9ff Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 16:20:56 +0100
Subject: b43: N-PHY: add RX IQ calibrationi for rev < 3
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 206 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 202 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 4111a4626001..f982f56d5bf3 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1660,6 +1660,206 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 	return error;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIqRev2 */
+static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
+			struct nphy_txgains target, u8 type, bool debug)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	int i, j, index;
+	u8 rfctl[2];
+	u8 afectl_core;
+	u16 tmp[6];
+	u16 cur_hpf1, cur_hpf2, cur_lna;
+	u32 real, imag;
+	enum ieee80211_band band;
+
+	u8 use;
+	u16 cur_hpf;
+	u16 lna[3] = { 3, 3, 1 };
+	u16 hpf1[3] = { 7, 2, 0 };
+	u16 hpf2[3] = { 2, 0, 0 };
+	u32 power[3];
+	u16 gain_save[2];
+	u16 cal_gain[2];
+	struct nphy_iqcal_params cal_params[2];
+	struct nphy_iq_est est;
+	int ret = 0;
+	bool playtone = true;
+	int desired = 13;
+
+	b43_nphy_stay_in_carrier_search(dev, 1);
+
+	if (dev->phy.rev < 2)
+		;/* TODO: Call N PHY Reapply TX Cal Coeffs */
+	/* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
+		width 16, and data gain_save */
+	for (i = 0; i < 2; i++) {
+		b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
+		cal_gain[i] = cal_params[i].cal_gain;
+	}
+	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
+		width 16, and data from cal_gain */
+
+	for (i = 0; i < 2; i++) {
+		if (i == 0) {
+			rfctl[0] = B43_NPHY_RFCTL_INTC1;
+			rfctl[1] = B43_NPHY_RFCTL_INTC2;
+			afectl_core = B43_NPHY_AFECTL_C1;
+		} else {
+			rfctl[0] = B43_NPHY_RFCTL_INTC2;
+			rfctl[1] = B43_NPHY_RFCTL_INTC1;
+			afectl_core = B43_NPHY_AFECTL_C2;
+		}
+
+		tmp[1] = b43_phy_read(dev, B43_NPHY_RFSEQCA);
+		tmp[2] = b43_phy_read(dev, afectl_core);
+		tmp[3] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		tmp[4] = b43_phy_read(dev, rfctl[0]);
+		tmp[5] = b43_phy_read(dev, rfctl[1]);
+
+		b43_phy_maskset(dev, B43_NPHY_RFSEQCA,
+				(u16)~B43_NPHY_RFSEQCA_RXDIS,
+				((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
+		b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_TXEN,
+				(1 - i));
+		b43_phy_set(dev, afectl_core, 0x0006);
+		b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0006);
+
+		band = b43_current_band(dev->wl);
+
+		if (nphy->rxcalparams & 0xFF000000) {
+			if (band == IEEE80211_BAND_5GHZ)
+				b43_phy_write(dev, rfctl[0], 0x140);
+			else
+				b43_phy_write(dev, rfctl[0], 0x110);
+		} else {
+			if (band == IEEE80211_BAND_5GHZ)
+				b43_phy_write(dev, rfctl[0], 0x180);
+			else
+				b43_phy_write(dev, rfctl[0], 0x120);
+		}
+
+		if (band == IEEE80211_BAND_5GHZ)
+			b43_phy_write(dev, rfctl[1], 0x148);
+		else
+			b43_phy_write(dev, rfctl[1], 0x114);
+
+		if (nphy->rxcalparams & 0x10000) {
+			b43_radio_maskset(dev, B2055_C1_GENSPARE2, 0xFC,
+					(i + 1));
+			b43_radio_maskset(dev, B2055_C2_GENSPARE2, 0xFC,
+					(2 - i));
+		}
+
+		for (j = 0; i < 4; j++) {
+			if (j < 3) {
+				cur_lna = lna[j];
+				cur_hpf1 = hpf1[j];
+				cur_hpf2 = hpf2[j];
+			} else {
+				if (power[1] > 10000) {
+					use = 1;
+					cur_hpf = cur_hpf1;
+					index = 2;
+				} else {
+					if (power[0] > 10000) {
+						use = 1;
+						cur_hpf = cur_hpf1;
+						index = 1;
+					} else {
+						index = 0;
+						use = 2;
+						cur_hpf = cur_hpf2;
+					}
+				}
+				cur_lna = lna[index];
+				cur_hpf1 = hpf1[index];
+				cur_hpf2 = hpf2[index];
+				cur_hpf += desired - hweight32(power[index]);
+				cur_hpf = clamp_val(cur_hpf, 0, 10);
+				if (use == 1)
+					cur_hpf1 = cur_hpf;
+				else
+					cur_hpf2 = cur_hpf;
+			}
+
+			tmp[0] = ((cur_hpf2 << 8) | (cur_hpf1 << 4) |
+					(cur_lna << 2));
+			/* TODO:Call N PHY RF Ctrl Override with 0x400, tmp[0],
+				3, 0 as arguments */
+			/* TODO: Call N PHY Force RF Seq with 2 as argument */
+			/* TODO: Call N PHT Stop Playback */
+
+			if (playtone) {
+				/* TODO: Call N PHY TX Tone with 4000,
+					(nphy_rxcalparams & 0xffff), 0, 0
+					as arguments and save result as ret */
+				playtone = false;
+			} else {
+				/* TODO: Call N PHY Run Samples with 160,
+					0xFFFF, 0, 0, 0 as arguments */
+			}
+
+			if (ret == 0) {
+				if (j < 3) {
+					b43_nphy_rx_iq_est(dev, &est, 1024, 32,
+									false);
+					if (i == 0) {
+						real = est.i0_pwr;
+						imag = est.q0_pwr;
+					} else {
+						real = est.i1_pwr;
+						imag = est.q1_pwr;
+					}
+					power[i] = ((real + imag) / 1024) + 1;
+				} else {
+					b43_nphy_calc_rx_iq_comp(dev, 1 << i);
+				}
+				/* TODO: Call N PHY Stop Playback */
+			}
+
+			if (ret != 0)
+				break;
+		}
+
+		b43_radio_mask(dev, B2055_C1_GENSPARE2, 0xFC);
+		b43_radio_mask(dev, B2055_C2_GENSPARE2, 0xFC);
+		b43_phy_write(dev, rfctl[1], tmp[5]);
+		b43_phy_write(dev, rfctl[0], tmp[4]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp[3]);
+		b43_phy_write(dev, afectl_core, tmp[2]);
+		b43_phy_write(dev, B43_NPHY_RFSEQCA, tmp[1]);
+
+		if (ret != 0)
+			break;
+	}
+
+	/* TODO: Call N PHY RF Ctrl Override with 0x400, 0, 3, 1 as arguments*/
+	/* TODO: Call N PHY Force RF Seq with 2 as argument */
+	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
+		width 16, and data from gain_save */
+
+	b43_nphy_stay_in_carrier_search(dev, 0);
+
+	return ret;
+}
+
+static int b43_nphy_rev3_cal_rx_iq(struct b43_wldev *dev,
+			struct nphy_txgains target, u8 type, bool debug)
+{
+	return -1;
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIq */
+static int b43_nphy_cal_rx_iq(struct b43_wldev *dev,
+			struct nphy_txgains target, u8 type, bool debug)
+{
+	if (dev->phy.rev >= 3)
+		return b43_nphy_rev3_cal_rx_iq(dev, target, type, debug);
+	else
+		return b43_nphy_rev2_cal_rx_iq(dev, target, type, debug);
+}
+
 /*
  * Init N-PHY
  * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
@@ -1831,16 +2031,14 @@ int b43_phy_initn(struct b43_wldev *dev)
 		}
 	}
 
-	/*
 	if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) {
 		if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
-			Call N PHY Save Cal
+			;/* Call N PHY Save Cal */
 		else if (nphy->mphase_cal_phase_id == 0)
-			N PHY Periodic Calibration with argument 3
+			;/* N PHY Periodic Calibration with argument 3 */
 	} else {
 		b43_nphy_restore_cal(dev);
 	}
-	*/
 
 	/* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
 	/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
-- 
cgit v1.2.3


From 6dcd9d911cace479ff5612dab3896c8fceb60773 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 16:24:57 +0100
Subject: b43: N-PHY: implement TX power control coef setup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 69 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index f982f56d5bf3..a0e8283519fd 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -659,6 +659,73 @@ static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
+static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	int i, j;
+	u32 tmp;
+	u32 cur_real, cur_imag, real_part, imag_part;
+
+	u16 buffer[7];
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, true);
+
+	/* TODO: Read an N PHY Table with ID 15, length 7, offset 80,
+		width 16, and data pointer buffer */
+
+	for (i = 0; i < 2; i++) {
+		tmp = ((buffer[i * 2] & 0x3FF) << 10) |
+			(buffer[i * 2 + 1] & 0x3FF);
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+				(((i + 26) << 10) | 320));
+		for (j = 0; j < 128; j++) {
+			b43_phy_write(dev, B43_NPHY_TABLE_DATAHI,
+					((tmp >> 16) & 0xFFFF));
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					(tmp & 0xFFFF));
+		}
+	}
+
+	for (i = 0; i < 2; i++) {
+		tmp = buffer[5 + i];
+		real_part = (tmp >> 8) & 0xFF;
+		imag_part = (tmp & 0xFF);
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+				(((i + 26) << 10) | 448));
+
+		if (dev->phy.rev >= 3) {
+			cur_real = real_part;
+			cur_imag = imag_part;
+			tmp = ((cur_real & 0xFF) << 8) | (cur_imag & 0xFF);
+		}
+
+		for (j = 0; j < 128; j++) {
+			if (dev->phy.rev < 3) {
+				cur_real = (real_part * loscale[j] + 128) >> 8;
+				cur_imag = (imag_part * loscale[j] + 128) >> 8;
+				tmp = ((cur_real & 0xFF) << 8) |
+					(cur_imag & 0xFF);
+			}
+			b43_phy_write(dev, B43_NPHY_TABLE_DATAHI,
+					((tmp >> 16) & 0xFFFF));
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					(tmp & 0xFFFF));
+		}
+	}
+
+	if (dev->phy.rev >= 3) {
+		b43_shm_write16(dev, B43_SHM_SHARED,
+				B43_SHM_SH_NPHY_TXPWR_INDX0, 0xFFFF);
+		b43_shm_write16(dev, B43_SHM_SHARED,
+				B43_SHM_SH_NPHY_TXPWR_INDX1, 0xFFFF);
+	}
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, false);
+}
+
 enum b43_nphy_rf_sequence {
 	B43_RFSEQ_RX2TX,
 	B43_RFSEQ_TX2RX,
@@ -2040,7 +2107,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 		b43_nphy_restore_cal(dev);
 	}
 
-	/* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
+	b43_nphy_tx_pwr_ctrl_coef_setup(dev);
 	/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
 	b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
 	b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);
-- 
cgit v1.2.3


From 730dd70549e0ec755dd55615ba5cfc38a482a947 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 15 Jan 2010 16:38:07 +0100
Subject: b43: N-PHY: drop unused definition, uncomment needed call
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index a0e8283519fd..4a817e3da163 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -222,12 +222,6 @@ void b43_nphy_radio_turn_off(struct b43_wldev *dev)
 		     ~B43_NPHY_RFCTL_CMD_EN);
 }
 
-#define ntab_upload(dev, offset, data) do { \
-		unsigned int i;						\
-		for (i = 0; i < (offset##_SIZE); i++)			\
-			b43_ntab_write(dev, (offset) + i, (data)[i]);	\
-	} while (0)
-
 /*
  * Upload the N-PHY tables.
  * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
@@ -2021,11 +2015,11 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43_nphy_workarounds(dev);
 
 	/* Reset CCA, in init code it differs a little from standard way */
-	/* b43_nphy_bmac_clock_fgc(dev, 1); */
+	b43_nphy_bmac_clock_fgc(dev, 1);
 	tmp = b43_phy_read(dev, B43_NPHY_BBCFG);
 	b43_phy_write(dev, B43_NPHY_BBCFG, tmp | B43_NPHY_BBCFG_RSTCCA);
 	b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA);
-	/* b43_nphy_bmac_clock_fgc(dev, 0); */
+	b43_nphy_bmac_clock_fgc(dev, 0);
 
 	/* TODO N PHY MAC PHY Clock Set with argument 1 */
 
-- 
cgit v1.2.3


From b87babeb40aaf879d20268792390ce831805a557 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:27 +0000
Subject: qlge: Add data for firmware dump.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h | 403 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 398 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index ee0e2bd4842f..a265325abb15 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -75,15 +75,43 @@
 #define TX_DESC_PER_OAL 0
 #endif
 
+/* Word shifting for converting 64-bit
+ * address to a series of 16-bit words.
+ * This is used for some MPI firmware
+ * mailbox commands.
+ */
+#define LSW(x)  ((u16)(x))
+#define MSW(x)  ((u16)((u32)(x) >> 16))
+#define LSD(x)  ((u32)((u64)(x)))
+#define MSD(x)  ((u32)((((u64)(x)) >> 32)))
+
 /* MPI test register definitions. This register
  * is used for determining alternate NIC function's
  * PCI->func number.
  */
 enum {
 	MPI_TEST_FUNC_PORT_CFG = 0x1002,
+	MPI_TEST_FUNC_PRB_CTL = 0x100e,
+		MPI_TEST_FUNC_PRB_EN = 0x18a20000,
+	MPI_TEST_FUNC_RST_STS = 0x100a,
+		MPI_TEST_FUNC_RST_FRC = 0x00000003,
+	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+	MPI_TEST_NIC1_FUNCTION_ENABLE = (1 << 0),
+	MPI_TEST_NIC1_FUNCTION_MASK = 0x0000000e,
 	MPI_TEST_NIC1_FUNC_SHIFT = 1,
+	MPI_TEST_NIC2_FUNCTION_ENABLE = (1 << 4),
+	MPI_TEST_NIC2_FUNCTION_MASK = 0x000000e0,
 	MPI_TEST_NIC2_FUNC_SHIFT = 5,
-	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+	MPI_TEST_FC1_FUNCTION_ENABLE = (1 << 8),
+	MPI_TEST_FC1_FUNCTION_MASK	= 0x00000e00,
+	MPI_TEST_FC1_FUNCTION_SHIFT = 9,
+	MPI_TEST_FC2_FUNCTION_ENABLE = (1 << 12),
+	MPI_TEST_FC2_FUNCTION_MASK = 0x0000e000,
+	MPI_TEST_FC2_FUNCTION_SHIFT = 13,
+
+	MPI_NIC_READ = 0x00000000,
+	MPI_NIC_REG_BLOCK = 0x00020000,
+	MPI_NIC_FUNCTION_SHIFT = 6,
 };
 
 /*
@@ -464,7 +492,7 @@ enum {
 	MDIO_PORT = 0x00000440,
 	MDIO_STATUS = 0x00000450,
 
-	/* XGMAC AUX statistics  registers */
+	XGMAC_REGISTER_END = 0x00000740,
 };
 
 /*
@@ -505,6 +533,7 @@ enum {
 enum {
 	MAC_ADDR_IDX_SHIFT = 4,
 	MAC_ADDR_TYPE_SHIFT = 16,
+	MAC_ADDR_TYPE_COUNT = 10,
 	MAC_ADDR_TYPE_MASK = 0x000f0000,
 	MAC_ADDR_TYPE_CAM_MAC = 0x00000000,
 	MAC_ADDR_TYPE_MULTI_MAC = 0x00010000,
@@ -522,6 +551,30 @@ enum {
 	MAC_ADDR_MR = (1 << 30),
 	MAC_ADDR_MW = (1 << 31),
 	MAX_MULTICAST_ENTRIES = 32,
+
+	/* Entry count and words per entry
+	 * for each address type in the filter.
+	 */
+	MAC_ADDR_MAX_CAM_ENTRIES = 512,
+	MAC_ADDR_MAX_CAM_WCOUNT = 3,
+	MAC_ADDR_MAX_MULTICAST_ENTRIES = 32,
+	MAC_ADDR_MAX_MULTICAST_WCOUNT = 2,
+	MAC_ADDR_MAX_VLAN_ENTRIES = 4096,
+	MAC_ADDR_MAX_VLAN_WCOUNT = 1,
+	MAC_ADDR_MAX_MCAST_FLTR_ENTRIES = 4096,
+	MAC_ADDR_MAX_MCAST_FLTR_WCOUNT = 1,
+	MAC_ADDR_MAX_FC_MAC_ENTRIES = 4,
+	MAC_ADDR_MAX_FC_MAC_WCOUNT = 2,
+	MAC_ADDR_MAX_MGMT_MAC_ENTRIES = 8,
+	MAC_ADDR_MAX_MGMT_MAC_WCOUNT = 2,
+	MAC_ADDR_MAX_MGMT_VLAN_ENTRIES = 16,
+	MAC_ADDR_MAX_MGMT_VLAN_WCOUNT = 1,
+	MAC_ADDR_MAX_MGMT_V4_ENTRIES = 4,
+	MAC_ADDR_MAX_MGMT_V4_WCOUNT = 1,
+	MAC_ADDR_MAX_MGMT_V6_ENTRIES = 4,
+	MAC_ADDR_MAX_MGMT_V6_WCOUNT = 4,
+	MAC_ADDR_MAX_MGMT_TU_DP_ENTRIES = 4,
+	MAC_ADDR_MAX_MGMT_TU_DP_WCOUNT = 1,
 };
 
 /*
@@ -592,6 +645,7 @@ enum {
 enum {
 	RT_IDX_IDX_SHIFT = 8,
 	RT_IDX_TYPE_MASK = 0x000f0000,
+	RT_IDX_TYPE_SHIFT = 16,
 	RT_IDX_TYPE_RT = 0x00000000,
 	RT_IDX_TYPE_RT_INV = 0x00010000,
 	RT_IDX_TYPE_NICQ = 0x00020000,
@@ -660,7 +714,89 @@ enum {
 	RT_IDX_UNUSED013 = 13,
 	RT_IDX_UNUSED014 = 14,
 	RT_IDX_PROMISCUOUS_SLOT = 15,
-	RT_IDX_MAX_SLOTS = 16,
+	RT_IDX_MAX_RT_SLOTS = 8,
+	RT_IDX_MAX_NIC_SLOTS = 16,
+};
+
+/*
+ * Serdes Address Register (XG_SERDES_ADDR) bit definitions.
+ */
+enum {
+	XG_SERDES_ADDR_RDY = (1 << 31),
+	XG_SERDES_ADDR_R = (1 << 30),
+
+	XG_SERDES_ADDR_STS = 0x00001E06,
+	XG_SERDES_ADDR_XFI1_PWR_UP = 0x00000005,
+	XG_SERDES_ADDR_XFI2_PWR_UP = 0x0000000a,
+	XG_SERDES_ADDR_XAUI_PWR_DOWN = 0x00000001,
+
+	/* Serdes coredump definitions. */
+	XG_SERDES_XAUI_AN_START = 0x00000000,
+	XG_SERDES_XAUI_AN_END = 0x00000034,
+	XG_SERDES_XAUI_HSS_PCS_START = 0x00000800,
+	XG_SERDES_XAUI_HSS_PCS_END = 0x0000880,
+	XG_SERDES_XFI_AN_START = 0x00001000,
+	XG_SERDES_XFI_AN_END = 0x00001034,
+	XG_SERDES_XFI_TRAIN_START = 0x10001050,
+	XG_SERDES_XFI_TRAIN_END = 0x1000107C,
+	XG_SERDES_XFI_HSS_PCS_START = 0x00001800,
+	XG_SERDES_XFI_HSS_PCS_END = 0x00001838,
+	XG_SERDES_XFI_HSS_TX_START = 0x00001c00,
+	XG_SERDES_XFI_HSS_TX_END = 0x00001c1f,
+	XG_SERDES_XFI_HSS_RX_START = 0x00001c40,
+	XG_SERDES_XFI_HSS_RX_END = 0x00001c5f,
+	XG_SERDES_XFI_HSS_PLL_START = 0x00001e00,
+	XG_SERDES_XFI_HSS_PLL_END = 0x00001e1f,
+};
+
+/*
+ *  NIC Probe Mux Address Register (PRB_MX_ADDR) bit definitions.
+ */
+enum {
+	PRB_MX_ADDR_ARE = (1 << 16),
+	PRB_MX_ADDR_UP = (1 << 15),
+	PRB_MX_ADDR_SWP = (1 << 14),
+
+	/* Module select values. */
+	PRB_MX_ADDR_MAX_MODS = 21,
+	PRB_MX_ADDR_MOD_SEL_SHIFT = 9,
+	PRB_MX_ADDR_MOD_SEL_TBD = 0,
+	PRB_MX_ADDR_MOD_SEL_IDE1 = 1,
+	PRB_MX_ADDR_MOD_SEL_IDE2 = 2,
+	PRB_MX_ADDR_MOD_SEL_FRB = 3,
+	PRB_MX_ADDR_MOD_SEL_ODE1 = 4,
+	PRB_MX_ADDR_MOD_SEL_ODE2 = 5,
+	PRB_MX_ADDR_MOD_SEL_DA1 = 6,
+	PRB_MX_ADDR_MOD_SEL_DA2 = 7,
+	PRB_MX_ADDR_MOD_SEL_IMP1 = 8,
+	PRB_MX_ADDR_MOD_SEL_IMP2 = 9,
+	PRB_MX_ADDR_MOD_SEL_OMP1 = 10,
+	PRB_MX_ADDR_MOD_SEL_OMP2 = 11,
+	PRB_MX_ADDR_MOD_SEL_ORS1 = 12,
+	PRB_MX_ADDR_MOD_SEL_ORS2 = 13,
+	PRB_MX_ADDR_MOD_SEL_REG = 14,
+	PRB_MX_ADDR_MOD_SEL_MAC1 = 16,
+	PRB_MX_ADDR_MOD_SEL_MAC2 = 17,
+	PRB_MX_ADDR_MOD_SEL_VQM1 = 18,
+	PRB_MX_ADDR_MOD_SEL_VQM2 = 19,
+	PRB_MX_ADDR_MOD_SEL_MOP = 20,
+	/* Bit fields indicating which modules
+	 * are valid for each clock domain.
+	 */
+	PRB_MX_ADDR_VALID_SYS_MOD = 0x000f7ff7,
+	PRB_MX_ADDR_VALID_PCI_MOD = 0x000040c1,
+	PRB_MX_ADDR_VALID_XGM_MOD = 0x00037309,
+	PRB_MX_ADDR_VALID_FC_MOD = 0x00003001,
+	PRB_MX_ADDR_VALID_TOTAL = 34,
+
+	/* Clock domain values. */
+	PRB_MX_ADDR_CLOCK_SHIFT = 6,
+	PRB_MX_ADDR_SYS_CLOCK = 0,
+	PRB_MX_ADDR_PCI_CLOCK = 2,
+	PRB_MX_ADDR_FC_CLOCK = 5,
+	PRB_MX_ADDR_XGM_CLOCK = 6,
+
+	PRB_MX_ADDR_MAX_MUX = 64,
 };
 
 /*
@@ -1432,7 +1568,7 @@ struct nic_stats {
 	u64 rx_nic_fifo_drop;
 };
 
-/* Address/Length pairs for the coredump. */
+/* Firmware coredump internal register address/length pairs. */
 enum {
 	MPI_CORE_REGS_ADDR = 0x00030000,
 	MPI_CORE_REGS_CNT = 127,
@@ -1487,7 +1623,7 @@ struct mpi_coredump_segment_header {
 	u8	description[16];
 };
 
-/* Reg dump segment numbers. */
+/* Firmware coredump header segment numbers. */
 enum {
 	CORE_SEG_NUM = 1,
 	TEST_LOGIC_SEG_NUM = 2,
@@ -1538,6 +1674,67 @@ enum {
 
 };
 
+/* There are 64 generic NIC registers. */
+#define NIC_REGS_DUMP_WORD_COUNT		64
+/* XGMAC word count. */
+#define XGMAC_DUMP_WORD_COUNT		(XGMAC_REGISTER_END / 4)
+/* Word counts for the SERDES blocks. */
+#define XG_SERDES_XAUI_AN_COUNT		14
+#define XG_SERDES_XAUI_HSS_PCS_COUNT	33
+#define XG_SERDES_XFI_AN_COUNT		14
+#define XG_SERDES_XFI_TRAIN_COUNT		12
+#define XG_SERDES_XFI_HSS_PCS_COUNT	15
+#define XG_SERDES_XFI_HSS_TX_COUNT		32
+#define XG_SERDES_XFI_HSS_RX_COUNT		32
+#define XG_SERDES_XFI_HSS_PLL_COUNT	32
+
+/* There are 2 CNA ETS and 8 NIC ETS registers. */
+#define ETS_REGS_DUMP_WORD_COUNT		10
+
+/* Each probe mux entry stores the probe type plus 64 entries
+ * that are each each 64-bits in length. There are a total of
+ * 34 (PRB_MX_ADDR_VALID_TOTAL) valid probes.
+ */
+#define PRB_MX_ADDR_PRB_WORD_COUNT		(1 + (PRB_MX_ADDR_MAX_MUX * 2))
+#define PRB_MX_DUMP_TOT_COUNT		(PRB_MX_ADDR_PRB_WORD_COUNT * \
+							PRB_MX_ADDR_VALID_TOTAL)
+/* Each routing entry consists of 4 32-bit words.
+ * They are route type, index, index word, and result.
+ * There are 2 route blocks with 8 entries each and
+ *  2 NIC blocks with 16 entries each.
+ * The totol entries is 48 with 4 words each.
+ */
+#define RT_IDX_DUMP_ENTRIES			48
+#define RT_IDX_DUMP_WORDS_PER_ENTRY	4
+#define RT_IDX_DUMP_TOT_WORDS		(RT_IDX_DUMP_ENTRIES * \
+						RT_IDX_DUMP_WORDS_PER_ENTRY)
+/* There are 10 address blocks in filter, each with
+ * different entry counts and different word-count-per-entry.
+ */
+#define MAC_ADDR_DUMP_ENTRIES \
+	((MAC_ADDR_MAX_CAM_ENTRIES * MAC_ADDR_MAX_CAM_WCOUNT) + \
+	(MAC_ADDR_MAX_MULTICAST_ENTRIES * MAC_ADDR_MAX_MULTICAST_WCOUNT) + \
+	(MAC_ADDR_MAX_VLAN_ENTRIES * MAC_ADDR_MAX_VLAN_WCOUNT) + \
+	(MAC_ADDR_MAX_MCAST_FLTR_ENTRIES * MAC_ADDR_MAX_MCAST_FLTR_WCOUNT) + \
+	(MAC_ADDR_MAX_FC_MAC_ENTRIES * MAC_ADDR_MAX_FC_MAC_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_MAC_ENTRIES * MAC_ADDR_MAX_MGMT_MAC_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_VLAN_ENTRIES * MAC_ADDR_MAX_MGMT_VLAN_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_V4_ENTRIES * MAC_ADDR_MAX_MGMT_V4_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_V6_ENTRIES * MAC_ADDR_MAX_MGMT_V6_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_TU_DP_ENTRIES * MAC_ADDR_MAX_MGMT_TU_DP_WCOUNT))
+#define MAC_ADDR_DUMP_WORDS_PER_ENTRY	2
+#define MAC_ADDR_DUMP_TOT_WORDS		(MAC_ADDR_DUMP_ENTRIES * \
+						MAC_ADDR_DUMP_WORDS_PER_ENTRY)
+/* Maximum of 4 functions whose semaphore registeres are
+ * in the coredump.
+ */
+#define MAX_SEMAPHORE_FUNCTIONS		4
+/* Defines for access the MPI shadow registers. */
+#define RISC_124		0x0003007c
+#define RISC_127		0x0003007f
+#define SHADOW_OFFSET	0xb0000000
+#define SHADOW_REG_SHIFT	20
+
 struct ql_nic_misc {
 	u32 rx_ring_count;
 	u32 tx_ring_count;
@@ -1579,6 +1776,199 @@ struct ql_reg_dump {
 	u32 ets[8+2];
 };
 
+struct ql_mpi_coredump {
+	/* segment 0 */
+	struct mpi_coredump_global_header mpi_global_header;
+
+	/* segment 1 */
+	struct mpi_coredump_segment_header core_regs_seg_hdr;
+	u32 mpi_core_regs[MPI_CORE_REGS_CNT];
+	u32 mpi_core_sh_regs[MPI_CORE_SH_REGS_CNT];
+
+	/* segment 2 */
+	struct mpi_coredump_segment_header test_logic_regs_seg_hdr;
+	u32 test_logic_regs[TEST_REGS_CNT];
+
+	/* segment 3 */
+	struct mpi_coredump_segment_header rmii_regs_seg_hdr;
+	u32 rmii_regs[RMII_REGS_CNT];
+
+	/* segment 4 */
+	struct mpi_coredump_segment_header fcmac1_regs_seg_hdr;
+	u32 fcmac1_regs[FCMAC_REGS_CNT];
+
+	/* segment 5 */
+	struct mpi_coredump_segment_header fcmac2_regs_seg_hdr;
+	u32 fcmac2_regs[FCMAC_REGS_CNT];
+
+	/* segment 6 */
+	struct mpi_coredump_segment_header fc1_mbx_regs_seg_hdr;
+	u32 fc1_mbx_regs[FC_MBX_REGS_CNT];
+
+	/* segment 7 */
+	struct mpi_coredump_segment_header ide_regs_seg_hdr;
+	u32 ide_regs[IDE_REGS_CNT];
+
+	/* segment 8 */
+	struct mpi_coredump_segment_header nic1_mbx_regs_seg_hdr;
+	u32 nic1_mbx_regs[NIC_MBX_REGS_CNT];
+
+	/* segment 9 */
+	struct mpi_coredump_segment_header smbus_regs_seg_hdr;
+	u32 smbus_regs[SMBUS_REGS_CNT];
+
+	/* segment 10 */
+	struct mpi_coredump_segment_header fc2_mbx_regs_seg_hdr;
+	u32 fc2_mbx_regs[FC_MBX_REGS_CNT];
+
+	/* segment 11 */
+	struct mpi_coredump_segment_header nic2_mbx_regs_seg_hdr;
+	u32 nic2_mbx_regs[NIC_MBX_REGS_CNT];
+
+	/* segment 12 */
+	struct mpi_coredump_segment_header i2c_regs_seg_hdr;
+	u32 i2c_regs[I2C_REGS_CNT];
+	/* segment 13 */
+	struct mpi_coredump_segment_header memc_regs_seg_hdr;
+	u32 memc_regs[MEMC_REGS_CNT];
+
+	/* segment 14 */
+	struct mpi_coredump_segment_header pbus_regs_seg_hdr;
+	u32 pbus_regs[PBUS_REGS_CNT];
+
+	/* segment 15 */
+	struct mpi_coredump_segment_header mde_regs_seg_hdr;
+	u32 mde_regs[MDE_REGS_CNT];
+
+	/* segment 16 */
+	struct mpi_coredump_segment_header nic_regs_seg_hdr;
+	u32 nic_regs[NIC_REGS_DUMP_WORD_COUNT];
+
+	/* segment 17 */
+	struct mpi_coredump_segment_header nic2_regs_seg_hdr;
+	u32 nic2_regs[NIC_REGS_DUMP_WORD_COUNT];
+
+	/* segment 18 */
+	struct mpi_coredump_segment_header xgmac1_seg_hdr;
+	u32 xgmac1[XGMAC_DUMP_WORD_COUNT];
+
+	/* segment 19 */
+	struct mpi_coredump_segment_header xgmac2_seg_hdr;
+	u32 xgmac2[XGMAC_DUMP_WORD_COUNT];
+
+	/* segment 20 */
+	struct mpi_coredump_segment_header code_ram_seg_hdr;
+	u32 code_ram[CODE_RAM_CNT];
+
+	/* segment 21 */
+	struct mpi_coredump_segment_header memc_ram_seg_hdr;
+	u32 memc_ram[MEMC_RAM_CNT];
+
+	/* segment 22 */
+	struct mpi_coredump_segment_header xaui_an_hdr;
+	u32 serdes_xaui_an[XG_SERDES_XAUI_AN_COUNT];
+
+	/* segment 23 */
+	struct mpi_coredump_segment_header xaui_hss_pcs_hdr;
+	u32 serdes_xaui_hss_pcs[XG_SERDES_XAUI_HSS_PCS_COUNT];
+
+	/* segment 24 */
+	struct mpi_coredump_segment_header xfi_an_hdr;
+	u32 serdes_xfi_an[XG_SERDES_XFI_AN_COUNT];
+
+	/* segment 25 */
+	struct mpi_coredump_segment_header xfi_train_hdr;
+	u32 serdes_xfi_train[XG_SERDES_XFI_TRAIN_COUNT];
+
+	/* segment 26 */
+	struct mpi_coredump_segment_header xfi_hss_pcs_hdr;
+	u32 serdes_xfi_hss_pcs[XG_SERDES_XFI_HSS_PCS_COUNT];
+
+	/* segment 27 */
+	struct mpi_coredump_segment_header xfi_hss_tx_hdr;
+	u32 serdes_xfi_hss_tx[XG_SERDES_XFI_HSS_TX_COUNT];
+
+	/* segment 28 */
+	struct mpi_coredump_segment_header xfi_hss_rx_hdr;
+	u32 serdes_xfi_hss_rx[XG_SERDES_XFI_HSS_RX_COUNT];
+
+	/* segment 29 */
+	struct mpi_coredump_segment_header xfi_hss_pll_hdr;
+	u32 serdes_xfi_hss_pll[XG_SERDES_XFI_HSS_PLL_COUNT];
+
+	/* segment 30 */
+	struct mpi_coredump_segment_header misc_nic_seg_hdr;
+	struct ql_nic_misc misc_nic_info;
+
+	/* segment 31 */
+	/* one interrupt state for each CQ */
+	struct mpi_coredump_segment_header intr_states_seg_hdr;
+	u32 intr_states[MAX_RX_RINGS];
+
+	/* segment 32 */
+	/* 3 cam words each for 16 unicast,
+	 * 2 cam words for each of 32 multicast.
+	 */
+	struct mpi_coredump_segment_header cam_entries_seg_hdr;
+	u32 cam_entries[(16 * 3) + (32 * 3)];
+
+	/* segment 33 */
+	struct mpi_coredump_segment_header nic_routing_words_seg_hdr;
+	u32 nic_routing_words[16];
+	/* segment 34 */
+	struct mpi_coredump_segment_header ets_seg_hdr;
+	u32 ets[ETS_REGS_DUMP_WORD_COUNT];
+
+	/* segment 35 */
+	struct mpi_coredump_segment_header probe_dump_seg_hdr;
+	u32 probe_dump[PRB_MX_DUMP_TOT_COUNT];
+
+	/* segment 36 */
+	struct mpi_coredump_segment_header routing_reg_seg_hdr;
+	u32 routing_regs[RT_IDX_DUMP_TOT_WORDS];
+
+	/* segment 37 */
+	struct mpi_coredump_segment_header mac_prot_reg_seg_hdr;
+	u32 mac_prot_regs[MAC_ADDR_DUMP_TOT_WORDS];
+
+	/* segment 38 */
+	struct mpi_coredump_segment_header xaui2_an_hdr;
+	u32 serdes2_xaui_an[XG_SERDES_XAUI_AN_COUNT];
+
+	/* segment 39 */
+	struct mpi_coredump_segment_header xaui2_hss_pcs_hdr;
+	u32 serdes2_xaui_hss_pcs[XG_SERDES_XAUI_HSS_PCS_COUNT];
+
+	/* segment 40 */
+	struct mpi_coredump_segment_header xfi2_an_hdr;
+	u32 serdes2_xfi_an[XG_SERDES_XFI_AN_COUNT];
+
+	/* segment 41 */
+	struct mpi_coredump_segment_header xfi2_train_hdr;
+	u32 serdes2_xfi_train[XG_SERDES_XFI_TRAIN_COUNT];
+
+	/* segment 42 */
+	struct mpi_coredump_segment_header xfi2_hss_pcs_hdr;
+	u32 serdes2_xfi_hss_pcs[XG_SERDES_XFI_HSS_PCS_COUNT];
+
+	/* segment 43 */
+	struct mpi_coredump_segment_header xfi2_hss_tx_hdr;
+	u32 serdes2_xfi_hss_tx[XG_SERDES_XFI_HSS_TX_COUNT];
+
+	/* segment 44 */
+	struct mpi_coredump_segment_header xfi2_hss_rx_hdr;
+	u32 serdes2_xfi_hss_rx[XG_SERDES_XFI_HSS_RX_COUNT];
+
+	/* segment 45 */
+	struct mpi_coredump_segment_header xfi2_hss_pll_hdr;
+	u32 serdes2_xfi_hss_pll[XG_SERDES_XFI_HSS_PLL_COUNT];
+
+	/* segment 50 */
+	/* semaphore register for all 5 functions */
+	struct mpi_coredump_segment_header sem_regs_seg_hdr;
+	u32 sem_regs[MAX_SEMAPHORE_FUNCTIONS];
+};
+
 /*
  * intr_context structure is used during initialization
  * to hook the interrupts.  It is also used in a single
@@ -1735,6 +2125,8 @@ struct ql_adapter {
 	u32 port_link_up;
 	u32 port_init;
 	u32 link_status;
+	struct ql_mpi_coredump *mpi_coredump;
+	u32 core_is_dumped;
 	u32 link_config;
 	u32 led_config;
 	u32 max_frame_size;
@@ -1747,6 +2139,7 @@ struct ql_adapter {
 	struct delayed_work mpi_work;
 	struct delayed_work mpi_port_cfg_work;
 	struct delayed_work mpi_idc_work;
+	struct delayed_work mpi_core_to_log;
 	struct completion ide_completion;
 	struct nic_operations *nic_ops;
 	u16 device_id;
-- 
cgit v1.2.3


From 8aae2600030f54494f9061d2cde141802d774be9 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:28 +0000
Subject: qlge: Add basic firmware dump.

Adding the infrstructure and basic data for the firmware
core dump.
The firmware coredump is turned OFF by default.  There will be no
memory allocations for data dumps to the log.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      |   6 +
 drivers/net/qlge/qlge_dbg.c  | 523 +++++++++++++++++++++++++++++++++++++++++++
 drivers/net/qlge/qlge_main.c |  20 ++
 drivers/net/qlge/qlge_mpi.c  |  73 ++++++
 4 files changed, 622 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index a265325abb15..bbdd388aa9b7 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2211,6 +2211,7 @@ extern int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 void ql_queue_fw_error(struct ql_adapter *qdev);
 void ql_mpi_work(struct work_struct *work);
 void ql_mpi_reset_work(struct work_struct *work);
+void ql_mpi_core_to_log(struct work_struct *work);
 int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 ebit);
 void ql_queue_asic_error(struct ql_adapter *qdev);
 u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr);
@@ -2221,6 +2222,11 @@ void ql_mpi_port_cfg_work(struct work_struct *work);
 int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
+int ql_write_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 data);
+int ql_unpause_mpi_risc(struct ql_adapter *qdev);
+int ql_pause_mpi_risc(struct ql_adapter *qdev);
+int ql_core_dump(struct ql_adapter *qdev,
+		struct ql_mpi_coredump *mpi_coredump);
 int ql_mb_about_fw(struct ql_adapter *qdev);
 int ql_wol(struct ql_adapter *qdev);
 int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol);
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 9f58c4710761..1d026141b78d 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -91,6 +91,179 @@ err:
 	return status;
 }
 
+/* Read the MPI Processor shadow registers */
+static int ql_get_mpi_shadow_regs(struct ql_adapter *qdev, u32 * buf)
+{
+	u32 i;
+	int status;
+
+	for (i = 0; i < MPI_CORE_SH_REGS_CNT; i++, buf++) {
+		status = ql_write_mpi_reg(qdev, RISC_124,
+				(SHADOW_OFFSET | i << SHADOW_REG_SHIFT));
+		if (status)
+			goto end;
+		status = ql_read_mpi_reg(qdev, RISC_127, buf);
+		if (status)
+			goto end;
+	}
+end:
+	return status;
+}
+
+/* Read the MPI Processor core registers */
+static int ql_get_mpi_regs(struct ql_adapter *qdev, u32 * buf,
+				u32 offset, u32 count)
+{
+	int i, status = 0;
+	for (i = 0; i < count; i++, buf++) {
+		status = ql_read_mpi_reg(qdev, offset + i, buf);
+		if (status)
+			return status;
+	}
+	return status;
+}
+
+
+/* Read out the routing index registers */
+static int ql_get_routing_index_registers(struct ql_adapter *qdev, u32 *buf)
+{
+	int status;
+	u32 type, index, index_max;
+	u32 result_index;
+	u32 result_data;
+	u32 val;
+
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	for (type = 0; type < 4; type++) {
+		if (type < 2)
+			index_max = 8;
+		else
+			index_max = 16;
+		for (index = 0; index < index_max; index++) {
+			val = RT_IDX_RS
+				| (type << RT_IDX_TYPE_SHIFT)
+				| (index << RT_IDX_IDX_SHIFT);
+			ql_write32(qdev, RT_IDX, val);
+			result_index = 0;
+			while ((result_index & RT_IDX_MR) == 0)
+				result_index = ql_read32(qdev, RT_IDX);
+			result_data = ql_read32(qdev, RT_DATA);
+			*buf = type;
+			buf++;
+			*buf = index;
+			buf++;
+			*buf = result_index;
+			buf++;
+			*buf = result_data;
+			buf++;
+		}
+	}
+	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Read out the MAC protocol registers */
+static void ql_get_mac_protocol_registers(struct ql_adapter *qdev, u32 *buf)
+{
+	u32 result_index, result_data;
+	u32 type;
+	u32 index;
+	u32 offset;
+	u32 val;
+	u32 initial_val = MAC_ADDR_RS;
+	u32 max_index;
+	u32 max_offset;
+
+	for (type = 0; type < MAC_ADDR_TYPE_COUNT; type++) {
+		switch (type) {
+
+		case 0: /* CAM */
+			initial_val |= MAC_ADDR_ADR;
+			max_index = MAC_ADDR_MAX_CAM_ENTRIES;
+			max_offset = MAC_ADDR_MAX_CAM_WCOUNT;
+			break;
+		case 1: /* Multicast MAC Address */
+			max_index = MAC_ADDR_MAX_CAM_WCOUNT;
+			max_offset = MAC_ADDR_MAX_CAM_WCOUNT;
+			break;
+		case 2: /* VLAN filter mask */
+		case 3: /* MC filter mask */
+			max_index = MAC_ADDR_MAX_CAM_WCOUNT;
+			max_offset = MAC_ADDR_MAX_CAM_WCOUNT;
+			break;
+		case 4: /* FC MAC addresses */
+			max_index = MAC_ADDR_MAX_FC_MAC_ENTRIES;
+			max_offset = MAC_ADDR_MAX_FC_MAC_WCOUNT;
+			break;
+		case 5: /* Mgmt MAC addresses */
+			max_index = MAC_ADDR_MAX_MGMT_MAC_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_MAC_WCOUNT;
+			break;
+		case 6: /* Mgmt VLAN addresses */
+			max_index = MAC_ADDR_MAX_MGMT_VLAN_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_VLAN_WCOUNT;
+			break;
+		case 7: /* Mgmt IPv4 address */
+			max_index = MAC_ADDR_MAX_MGMT_V4_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_V4_WCOUNT;
+			break;
+		case 8: /* Mgmt IPv6 address */
+			max_index = MAC_ADDR_MAX_MGMT_V6_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_V6_WCOUNT;
+			break;
+		case 9: /* Mgmt TCP/UDP Dest port */
+			max_index = MAC_ADDR_MAX_MGMT_TU_DP_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_TU_DP_WCOUNT;
+			break;
+		default:
+			printk(KERN_ERR"Bad type!!! 0x%08x\n", type);
+			max_index = 0;
+			max_offset = 0;
+			break;
+		}
+		for (index = 0; index < max_index; index++) {
+			for (offset = 0; offset < max_offset; offset++) {
+				val = initial_val
+					| (type << MAC_ADDR_TYPE_SHIFT)
+					| (index << MAC_ADDR_IDX_SHIFT)
+					| (offset);
+				ql_write32(qdev, MAC_ADDR_IDX, val);
+				result_index = 0;
+				while ((result_index & MAC_ADDR_MR) == 0) {
+					result_index = ql_read32(qdev,
+								MAC_ADDR_IDX);
+				}
+				result_data = ql_read32(qdev, MAC_ADDR_DATA);
+				*buf = result_index;
+				buf++;
+				*buf = result_data;
+				buf++;
+			}
+		}
+	}
+}
+
+static void ql_get_sem_registers(struct ql_adapter *qdev, u32 *buf)
+{
+	u32 func_num, reg, reg_val;
+	int status;
+
+	for (func_num = 0; func_num < MAX_SEMAPHORE_FUNCTIONS ; func_num++) {
+		reg = MPI_NIC_REG_BLOCK
+			| (func_num << MPI_NIC_FUNCTION_SHIFT)
+			| (SEM / 4);
+		status = ql_read_mpi_reg(qdev, reg, &reg_val);
+		*buf = reg_val;
+		/* if the read failed then dead fill the element. */
+		if (!status)
+			*buf = 0xdeadbeef;
+		buf++;
+	}
+}
+
 /* Create a coredump segment header */
 static void ql_build_coredump_seg_header(
 		struct mpi_coredump_segment_header *seg_hdr,
@@ -103,6 +276,329 @@ static void ql_build_coredump_seg_header(
 	memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
 }
 
+/*
+ * This function should be called when a coredump / probedump
+ * is to be extracted from the HBA. It is assumed there is a
+ * qdev structure that contains the base address of the register
+ * space for this function as well as a coredump structure that
+ * will contain the dump.
+ */
+int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
+{
+	int status;
+	int i;
+
+	if (!mpi_coredump) {
+		QPRINTK(qdev, DRV, ERR,
+			"No memory available.\n");
+		return -ENOMEM;
+	}
+
+	/* Try to get the spinlock, but dont worry if
+	 * it isn't available.  If the firmware died it
+	 * might be holding the sem.
+	 */
+	ql_sem_spinlock(qdev, SEM_PROC_REG_MASK);
+
+	status = ql_pause_mpi_risc(qdev);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed RISC pause. Status = 0x%.08x\n", status);
+		goto err;
+	}
+
+	/* Insert the global header */
+	memset(&(mpi_coredump->mpi_global_header), 0,
+		sizeof(struct mpi_coredump_global_header));
+	mpi_coredump->mpi_global_header.cookie = MPI_COREDUMP_COOKIE;
+	mpi_coredump->mpi_global_header.headerSize =
+		sizeof(struct mpi_coredump_global_header);
+	mpi_coredump->mpi_global_header.imageSize =
+		sizeof(struct ql_mpi_coredump);
+	memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+		sizeof(mpi_coredump->mpi_global_header.idString));
+
+	/* Get generic NIC reg dump */
+	ql_build_coredump_seg_header(&mpi_coredump->nic_regs_seg_hdr,
+			NIC1_CONTROL_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->nic_regs), "NIC1 Registers");
+
+	if (qdev->func & 1) {
+		/* Odd means our function is NIC 2 */
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic2_regs[i] =
+					 ql_read32(qdev, i * sizeof(u32));
+	} else {
+		/* Even means our function is NIC 1 */
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic_regs[i] =
+					ql_read32(qdev, i * sizeof(u32));
+	}
+
+	ql_build_coredump_seg_header(&mpi_coredump->core_regs_seg_hdr,
+				CORE_SEG_NUM,
+				sizeof(mpi_coredump->core_regs_seg_hdr) +
+				sizeof(mpi_coredump->mpi_core_regs) +
+				sizeof(mpi_coredump->mpi_core_sh_regs),
+				"Core Registers");
+
+	/* Get the MPI Core Registers */
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->mpi_core_regs[0],
+				 MPI_CORE_REGS_ADDR, MPI_CORE_REGS_CNT);
+	if (status)
+		goto err;
+	/* Get the 16 MPI shadow registers */
+	status = ql_get_mpi_shadow_regs(qdev,
+					&mpi_coredump->mpi_core_sh_regs[0]);
+	if (status)
+		goto err;
+
+	/* Get the Test Logic Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->test_logic_regs_seg_hdr,
+				TEST_LOGIC_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->test_logic_regs),
+				"Test Logic Regs");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->test_logic_regs[0],
+				 TEST_REGS_ADDR, TEST_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the RMII Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->rmii_regs_seg_hdr,
+				RMII_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->rmii_regs),
+				"RMII Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->rmii_regs[0],
+				 RMII_REGS_ADDR, RMII_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FCMAC1 Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->fcmac1_regs_seg_hdr,
+				FCMAC1_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->fcmac1_regs),
+				"FCMAC1 Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->fcmac1_regs[0],
+				 FCMAC1_REGS_ADDR, FCMAC_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FCMAC2 Registers */
+
+	ql_build_coredump_seg_header(&mpi_coredump->fcmac2_regs_seg_hdr,
+				FCMAC2_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->fcmac2_regs),
+				"FCMAC2 Registers");
+
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->fcmac2_regs[0],
+				 FCMAC2_REGS_ADDR, FCMAC_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FC1 MBX Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->fc1_mbx_regs_seg_hdr,
+				FC1_MBOX_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->fc1_mbx_regs),
+				"FC1 MBox Regs");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->fc1_mbx_regs[0],
+				 FC1_MBX_REGS_ADDR, FC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the IDE Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->ide_regs_seg_hdr,
+				IDE_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->ide_regs),
+				"IDE Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->ide_regs[0],
+				 IDE_REGS_ADDR, IDE_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the NIC1 MBX Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->nic1_mbx_regs_seg_hdr,
+				NIC1_MBOX_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic1_mbx_regs),
+				"NIC1 MBox Regs");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->nic1_mbx_regs[0],
+				 NIC1_MBX_REGS_ADDR, NIC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the SMBus Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->smbus_regs_seg_hdr,
+				SMBUS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->smbus_regs),
+				"SMBus Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->smbus_regs[0],
+				 SMBUS_REGS_ADDR, SMBUS_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FC2 MBX Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->fc2_mbx_regs_seg_hdr,
+				FC2_MBOX_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->fc2_mbx_regs),
+				"FC2 MBox Regs");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->fc2_mbx_regs[0],
+				 FC2_MBX_REGS_ADDR, FC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the NIC2 MBX Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->nic2_mbx_regs_seg_hdr,
+				NIC2_MBOX_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic2_mbx_regs),
+				"NIC2 MBox Regs");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->nic2_mbx_regs[0],
+				 NIC2_MBX_REGS_ADDR, NIC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the I2C Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->i2c_regs_seg_hdr,
+				I2C_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->i2c_regs),
+				"I2C Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->i2c_regs[0],
+				 I2C_REGS_ADDR, I2C_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the MEMC Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->memc_regs_seg_hdr,
+				MEMC_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->memc_regs),
+				"MEMC Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->memc_regs[0],
+				 MEMC_REGS_ADDR, MEMC_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the PBus Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->pbus_regs_seg_hdr,
+				PBUS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->pbus_regs),
+				"PBUS Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->pbus_regs[0],
+				 PBUS_REGS_ADDR, PBUS_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the MDE Registers */
+	ql_build_coredump_seg_header(&mpi_coredump->mde_regs_seg_hdr,
+				MDE_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->mde_regs),
+				"MDE Registers");
+	status = ql_get_mpi_regs(qdev, &mpi_coredump->mde_regs[0],
+				 MDE_REGS_ADDR, MDE_REGS_CNT);
+	if (status)
+		goto err;
+
+	ql_build_coredump_seg_header(&mpi_coredump->misc_nic_seg_hdr,
+				MISC_NIC_INFO_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->misc_nic_info),
+				"MISC NIC INFO");
+	mpi_coredump->misc_nic_info.rx_ring_count = qdev->rx_ring_count;
+	mpi_coredump->misc_nic_info.tx_ring_count = qdev->tx_ring_count;
+	mpi_coredump->misc_nic_info.intr_count = qdev->intr_count;
+	mpi_coredump->misc_nic_info.function = qdev->func;
+
+	/* Segment 31 */
+	/* Get indexed register values. */
+	ql_build_coredump_seg_header(&mpi_coredump->intr_states_seg_hdr,
+				INTR_STATES_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->intr_states),
+				"INTR States");
+	ql_get_intr_states(qdev, &mpi_coredump->intr_states[0]);
+
+	ql_build_coredump_seg_header(&mpi_coredump->cam_entries_seg_hdr,
+				CAM_ENTRIES_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->cam_entries),
+				"CAM Entries");
+	status = ql_get_cam_entries(qdev, &mpi_coredump->cam_entries[0]);
+	if (status)
+		goto err;
+
+	ql_build_coredump_seg_header(&mpi_coredump->nic_routing_words_seg_hdr,
+				ROUTING_WORDS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic_routing_words),
+				"Routing Words");
+	status = ql_get_routing_entries(qdev,
+			 &mpi_coredump->nic_routing_words[0]);
+	if (status)
+		goto err;
+
+	/* Segment 34 (Rev C. step 23) */
+	ql_build_coredump_seg_header(&mpi_coredump->ets_seg_hdr,
+				ETS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->ets),
+				"ETS Registers");
+	status = ql_get_ets_regs(qdev, &mpi_coredump->ets[0]);
+	if (status)
+		goto err;
+
+	ql_build_coredump_seg_header(&mpi_coredump->routing_reg_seg_hdr,
+				ROUTING_INDEX_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->routing_regs),
+				"Routing Regs");
+	status = ql_get_routing_index_registers(qdev,
+					&mpi_coredump->routing_regs[0]);
+	if (status)
+		goto err;
+
+	ql_build_coredump_seg_header(&mpi_coredump->mac_prot_reg_seg_hdr,
+				MAC_PROTOCOL_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->mac_prot_regs),
+				"MAC Prot Regs");
+	ql_get_mac_protocol_registers(qdev, &mpi_coredump->mac_prot_regs[0]);
+
+	/* Get the semaphore registers for all 5 functions */
+	ql_build_coredump_seg_header(&mpi_coredump->sem_regs_seg_hdr,
+			SEM_REGS_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->sem_regs),	"Sem Registers");
+
+	ql_get_sem_registers(qdev, &mpi_coredump->sem_regs[0]);
+
+	/* Prevent the mpi restarting while we dump the memory.*/
+	ql_write_mpi_reg(qdev, MPI_TEST_FUNC_RST_STS, MPI_TEST_FUNC_RST_FRC);
+
+	/* clear the pause */
+	status = ql_unpause_mpi_risc(qdev);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed RISC unpause. Status = 0x%.08x\n", status);
+		goto err;
+	}
+err:
+	ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */
+	return status;
+
+}
+
 void ql_gen_reg_dump(struct ql_adapter *qdev,
 			struct ql_reg_dump *mpi_coredump)
 {
@@ -180,6 +676,33 @@ void ql_gen_reg_dump(struct ql_adapter *qdev,
 		return;
 }
 
+/* Coredump to messages log file using separate worker thread */
+void ql_mpi_core_to_log(struct work_struct *work)
+{
+	struct ql_adapter *qdev =
+		container_of(work, struct ql_adapter, mpi_core_to_log.work);
+	u32 *tmp, count;
+	int i;
+
+	count = sizeof(struct ql_mpi_coredump) / sizeof(u32);
+	tmp = (u32 *)qdev->mpi_coredump;
+	QPRINTK(qdev, DRV, DEBUG, "Core is dumping to log file!\n");
+
+	for (i = 0; i < count; i += 8) {
+		printk(KERN_ERR "%.08x: %.08x %.08x %.08x %.08x %.08x "
+			"%.08x %.08x %.08x \n", i,
+			tmp[i + 0],
+			tmp[i + 1],
+			tmp[i + 2],
+			tmp[i + 3],
+			tmp[i + 4],
+			tmp[i + 5],
+			tmp[i + 6],
+			tmp[i + 7]);
+		msleep(5);
+	}
+}
+
 #ifdef QL_REG_DUMP
 static void ql_dump_intr_states(struct ql_adapter *qdev)
 {
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 167a3dab2f18..e58892304e19 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -73,6 +73,13 @@ static int qlge_irq_type = MSIX_IRQ;
 module_param(qlge_irq_type, int, MSIX_IRQ);
 MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
+static int qlge_mpi_coredump;
+module_param(qlge_mpi_coredump, int, 0);
+MODULE_PARM_DESC(qlge_mpi_coredump,
+		"Option to enable MPI firmware dump. "
+		"Default is OFF - Do Not allocate memory. "
+		"Do not perform firmware coredump.");
+
 static DEFINE_PCI_DEVICE_TABLE(qlge_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8000)},
@@ -3842,6 +3849,7 @@ static int ql_adapter_down(struct ql_adapter *qdev)
 	cancel_delayed_work_sync(&qdev->mpi_reset_work);
 	cancel_delayed_work_sync(&qdev->mpi_work);
 	cancel_delayed_work_sync(&qdev->mpi_idc_work);
+	cancel_delayed_work_sync(&qdev->mpi_core_to_log);
 	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
 
 	for (i = 0; i < qdev->rss_ring_count; i++)
@@ -4398,6 +4406,7 @@ static void ql_release_all(struct pci_dev *pdev)
 		iounmap(qdev->reg_base);
 	if (qdev->doorbell_area)
 		iounmap(qdev->doorbell_area);
+	vfree(qdev->mpi_coredump);
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
@@ -4479,6 +4488,15 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	spin_lock_init(&qdev->hw_lock);
 	spin_lock_init(&qdev->stats_lock);
 
+	if (qlge_mpi_coredump) {
+		qdev->mpi_coredump =
+			vmalloc(sizeof(struct ql_mpi_coredump));
+		if (qdev->mpi_coredump == NULL) {
+			dev_err(&pdev->dev, "Coredump alloc failed.\n");
+			err = -ENOMEM;
+			goto err_out;
+		}
+	}
 	/* make sure the EEPROM is good */
 	err = qdev->nic_ops->get_flash(qdev);
 	if (err) {
@@ -4508,6 +4526,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work);
 	INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work);
 	INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
+	INIT_DELAYED_WORK(&qdev->mpi_core_to_log, ql_mpi_core_to_log);
 	init_completion(&qdev->ide_completion);
 
 	if (!cards_found) {
@@ -4630,6 +4649,7 @@ static void ql_eeh_close(struct net_device *ndev)
 	cancel_delayed_work_sync(&qdev->mpi_reset_work);
 	cancel_delayed_work_sync(&qdev->mpi_work);
 	cancel_delayed_work_sync(&qdev->mpi_idc_work);
+	cancel_delayed_work_sync(&qdev->mpi_core_to_log);
 	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
 
 	for (i = 0; i < qdev->rss_ring_count; i++)
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index e2b2286102d4..242b1ea955e4 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,5 +1,35 @@
 #include "qlge.h"
 
+int ql_unpause_mpi_risc(struct ql_adapter *qdev)
+{
+	u32 tmp;
+
+	/* Un-pause the RISC */
+	tmp = ql_read32(qdev, CSR);
+	if (!(tmp & CSR_RP))
+		return -EIO;
+
+	ql_write32(qdev, CSR, CSR_CMD_CLR_PAUSE);
+	return 0;
+}
+
+int ql_pause_mpi_risc(struct ql_adapter *qdev)
+{
+	u32 tmp;
+	int count = UDELAY_COUNT;
+
+	/* Pause the RISC */
+	ql_write32(qdev, CSR, CSR_CMD_SET_PAUSE);
+	do {
+		tmp = ql_read32(qdev, CSR);
+		if (tmp & CSR_RP)
+			break;
+		mdelay(UDELAY_DELAY);
+		count--;
+	} while (count);
+	return (count == 0) ? -ETIMEDOUT : 0;
+}
+
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
 {
 	int status;
@@ -45,6 +75,35 @@ int ql_soft_reset_mpi_risc(struct ql_adapter *qdev)
 	return status;
 }
 
+/* Determine if we are in charge of the firwmare. If
+ * we are the lower of the 2 NIC pcie functions, or if
+ * we are the higher function and the lower function
+ * is not enabled.
+ */
+int ql_own_firmware(struct ql_adapter *qdev)
+{
+	u32 temp;
+
+	/* If we are the lower of the 2 NIC functions
+	 * on the chip the we are responsible for
+	 * core dump and firmware reset after an error.
+	 */
+	if (qdev->func < qdev->alt_func)
+		return 1;
+
+	/* If we are the higher of the 2 NIC functions
+	 * on the chip and the lower function is not
+	 * enabled, then we are responsible for
+	 * core dump and firmware reset after an error.
+	 */
+	temp =  ql_read32(qdev, STS);
+	if (!(temp & (1 << (8 + qdev->alt_func))))
+		return 1;
+
+	return 0;
+
+}
+
 static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
 {
 	int i, status;
@@ -1143,5 +1202,19 @@ void ql_mpi_reset_work(struct work_struct *work)
 	cancel_delayed_work_sync(&qdev->mpi_work);
 	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
 	cancel_delayed_work_sync(&qdev->mpi_idc_work);
+	/* If we're not the dominant NIC function,
+	 * then there is nothing to do.
+	 */
+	if (!ql_own_firmware(qdev)) {
+		QPRINTK(qdev, DRV, ERR, "Don't own firmware!\n");
+		return;
+	}
+
+	if (!ql_core_dump(qdev, qdev->mpi_coredump)) {
+		QPRINTK(qdev, DRV, ERR, "Core is dumped!\n");
+		qdev->core_is_dumped = 1;
+		queue_delayed_work(qdev->workqueue,
+			&qdev->mpi_core_to_log, 5 * HZ);
+	}
 	ql_soft_reset_mpi_risc(qdev);
 }
-- 
cgit v1.2.3


From c89ec8b9de887cda0879d27036fce8d2a2fd6400 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:29 +0000
Subject: qlge: Add probe regs to firmware dump.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_dbg.c | 54 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 1d026141b78d..913ca1e10e3e 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -123,6 +123,53 @@ static int ql_get_mpi_regs(struct ql_adapter *qdev, u32 * buf,
 	return status;
 }
 
+/* Read the ASIC probe dump */
+static unsigned int *ql_get_probe(struct ql_adapter *qdev, u32 clock,
+					u32 valid, u32 *buf)
+{
+	u32 module, mux_sel, probe, lo_val, hi_val;
+
+	for (module = 0; module < PRB_MX_ADDR_MAX_MODS; module++) {
+		if (!((valid >> module) & 1))
+			continue;
+		for (mux_sel = 0; mux_sel < PRB_MX_ADDR_MAX_MUX; mux_sel++) {
+			probe = clock
+				| PRB_MX_ADDR_ARE
+				| mux_sel
+				| (module << PRB_MX_ADDR_MOD_SEL_SHIFT);
+			ql_write32(qdev, PRB_MX_ADDR, probe);
+			lo_val = ql_read32(qdev, PRB_MX_DATA);
+			if (mux_sel == 0) {
+				*buf = probe;
+				buf++;
+			}
+			probe |= PRB_MX_ADDR_UP;
+			ql_write32(qdev, PRB_MX_ADDR, probe);
+			hi_val = ql_read32(qdev, PRB_MX_DATA);
+			*buf = lo_val;
+			buf++;
+			*buf = hi_val;
+			buf++;
+		}
+	}
+	return buf;
+}
+
+static int ql_get_probe_dump(struct ql_adapter *qdev, unsigned int *buf)
+{
+	/* First we have to enable the probe mux */
+	ql_write_mpi_reg(qdev, MPI_TEST_FUNC_PRB_CTL, MPI_TEST_FUNC_PRB_EN);
+	buf = ql_get_probe(qdev, PRB_MX_ADDR_SYS_CLOCK,
+			PRB_MX_ADDR_VALID_SYS_MOD, buf);
+	buf = ql_get_probe(qdev, PRB_MX_ADDR_PCI_CLOCK,
+			PRB_MX_ADDR_VALID_PCI_MOD, buf);
+	buf = ql_get_probe(qdev, PRB_MX_ADDR_XGM_CLOCK,
+			PRB_MX_ADDR_VALID_XGM_MOD, buf);
+	buf = ql_get_probe(qdev, PRB_MX_ADDR_FC_CLOCK,
+			PRB_MX_ADDR_VALID_FC_MOD, buf);
+	return 0;
+
+}
 
 /* Read out the routing index registers */
 static int ql_get_routing_index_registers(struct ql_adapter *qdev, u32 *buf)
@@ -558,6 +605,13 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 	if (status)
 		goto err;
 
+	ql_build_coredump_seg_header(&mpi_coredump->probe_dump_seg_hdr,
+				PROBE_DUMP_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->probe_dump),
+				"Probe Dump");
+	ql_get_probe_dump(qdev, &mpi_coredump->probe_dump[0]);
+
 	ql_build_coredump_seg_header(&mpi_coredump->routing_reg_seg_hdr,
 				ROUTING_INDEX_SEG_NUM,
 				sizeof(struct mpi_coredump_segment_header)
-- 
cgit v1.2.3


From 2c1f73c3ddfd526750b003bc49a255641ac1f0ca Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:30 +0000
Subject: qlge: Add RAM dump to firmware dump.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h     |  3 ++
 drivers/net/qlge/qlge_dbg.c | 35 +++++++++++++++++++++
 drivers/net/qlge/qlge_mpi.c | 76 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 114 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index bbdd388aa9b7..05feb03e9da6 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2225,6 +2225,9 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_write_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 data);
 int ql_unpause_mpi_risc(struct ql_adapter *qdev);
 int ql_pause_mpi_risc(struct ql_adapter *qdev);
+int ql_hard_reset_mpi_risc(struct ql_adapter *qdev);
+int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf,
+		u32 ram_addr, int word_count);
 int ql_core_dump(struct ql_adapter *qdev,
 		struct ql_mpi_coredump *mpi_coredump);
 int ql_mb_about_fw(struct ql_adapter *qdev);
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 913ca1e10e3e..833cfd7a22c1 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -647,6 +647,41 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 			"Failed RISC unpause. Status = 0x%.08x\n", status);
 		goto err;
 	}
+
+	/* Reset the RISC so we can dump RAM */
+	status = ql_hard_reset_mpi_risc(qdev);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed RISC reset. Status = 0x%.08x\n", status);
+		goto err;
+	}
+
+	ql_build_coredump_seg_header(&mpi_coredump->code_ram_seg_hdr,
+				WCS_RAM_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->code_ram),
+				"WCS RAM");
+	status = ql_dump_risc_ram_area(qdev, &mpi_coredump->code_ram[0],
+					CODE_RAM_ADDR, CODE_RAM_CNT);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed Dump of CODE RAM. Status = 0x%.08x\n", status);
+		goto err;
+	}
+
+	/* Insert the segment header */
+	ql_build_coredump_seg_header(&mpi_coredump->memc_ram_seg_hdr,
+				MEMC_RAM_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->memc_ram),
+				"MEMC RAM");
+	status = ql_dump_risc_ram_area(qdev, &mpi_coredump->memc_ram[0],
+					MEMC_RAM_ADDR, MEMC_RAM_CNT);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed Dump of MEMC RAM. Status = 0x%.08x\n", status);
+		goto err;
+	}
 err:
 	ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */
 	return status;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 242b1ea955e4..3304eb7df581 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -30,6 +30,25 @@ int ql_pause_mpi_risc(struct ql_adapter *qdev)
 	return (count == 0) ? -ETIMEDOUT : 0;
 }
 
+int ql_hard_reset_mpi_risc(struct ql_adapter *qdev)
+{
+	u32 tmp;
+	int count = UDELAY_COUNT;
+
+	/* Reset the RISC */
+	ql_write32(qdev, CSR, CSR_CMD_SET_RST);
+	do {
+		tmp = ql_read32(qdev, CSR);
+		if (tmp & CSR_RR) {
+			ql_write32(qdev, CSR, CSR_CMD_CLR_RST);
+			break;
+		}
+		mdelay(UDELAY_DELAY);
+		count--;
+	} while (count);
+	return (count == 0) ? -ETIMEDOUT : 0;
+}
+
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
 {
 	int status;
@@ -728,6 +747,63 @@ int ql_mb_set_port_cfg(struct ql_adapter *qdev)
 	return status;
 }
 
+int ql_mb_dump_ram(struct ql_adapter *qdev, u64 req_dma, u32 addr,
+	u32 size)
+{
+	int status = 0;
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 9;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_DUMP_RISC_RAM;
+	mbcp->mbox_in[1] = LSW(addr);
+	mbcp->mbox_in[2] = MSW(req_dma);
+	mbcp->mbox_in[3] = LSW(req_dma);
+	mbcp->mbox_in[4] = MSW(size);
+	mbcp->mbox_in[5] = LSW(size);
+	mbcp->mbox_in[6] = MSW(MSD(req_dma));
+	mbcp->mbox_in[7] = LSW(MSD(req_dma));
+	mbcp->mbox_in[8] = MSW(addr);
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to dump risc RAM.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+/* Issue a mailbox command to dump RISC RAM. */
+int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf,
+		u32 ram_addr, int word_count)
+{
+	int status;
+	char *my_buf;
+	dma_addr_t buf_dma;
+
+	my_buf = pci_alloc_consistent(qdev->pdev, word_count * sizeof(u32),
+					&buf_dma);
+	if (!my_buf)
+		return -EIO;
+
+	status = ql_mb_dump_ram(qdev, buf_dma, ram_addr, word_count);
+	if (!status)
+		memcpy(buf, my_buf, word_count * sizeof(u32));
+
+	pci_free_consistent(qdev->pdev, word_count * sizeof(u32), my_buf,
+				buf_dma);
+	return status;
+}
+
 /* Get link settings and maximum frame size settings
  * for the current port.
  * Most likely will block.
-- 
cgit v1.2.3


From 24bb55b480f16f4cd8d64c2d46e28f0c82df0409 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:31 +0000
Subject: qlge: Add alternate function's reg dump to fw dump.

Get the 2nd (other) nic function register values.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_dbg.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 833cfd7a22c1..181281390129 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -1,5 +1,23 @@
 #include "qlge.h"
 
+/* Read a NIC register from the alternate function. */
+static u32 ql_read_other_func_reg(struct ql_adapter *qdev,
+						u32 reg)
+{
+	u32 register_to_read;
+	u32 reg_val;
+	unsigned int status = 0;
+
+	register_to_read = MPI_NIC_REG_BLOCK
+				| MPI_NIC_READ
+				| (qdev->alt_func << MPI_NIC_FUNCTION_SHIFT)
+				| reg;
+	status = ql_read_mpi_reg(qdev, register_to_read, &reg_val);
+	if (status != 0)
+		return 0xffffffff;
+
+	return reg_val;
+}
 
 static int ql_get_ets_regs(struct ql_adapter *qdev, u32 * buf)
 {
@@ -371,16 +389,28 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 			sizeof(struct mpi_coredump_segment_header) +
 			sizeof(mpi_coredump->nic_regs), "NIC1 Registers");
 
+	ql_build_coredump_seg_header(&mpi_coredump->nic2_regs_seg_hdr,
+			NIC2_CONTROL_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->nic2_regs), "NIC2 Registers");
+
 	if (qdev->func & 1) {
 		/* Odd means our function is NIC 2 */
 		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
 			mpi_coredump->nic2_regs[i] =
 					 ql_read32(qdev, i * sizeof(u32));
+
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic_regs[i] =
+			ql_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
 	} else {
 		/* Even means our function is NIC 1 */
 		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
 			mpi_coredump->nic_regs[i] =
 					ql_read32(qdev, i * sizeof(u32));
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic2_regs[i] =
+			ql_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
 	}
 
 	ql_build_coredump_seg_header(&mpi_coredump->core_regs_seg_hdr,
-- 
cgit v1.2.3


From a48c86fdb1253f36167bab1fc30a51211d49a901 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:32 +0000
Subject: qlge: Add serdes reg blocks dump to firmware dump.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_dbg.c | 417 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 417 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 181281390129..87e50d9c3350 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -19,6 +19,318 @@ static u32 ql_read_other_func_reg(struct ql_adapter *qdev,
 	return reg_val;
 }
 
+/* Write a NIC register from the alternate function. */
+static int ql_write_other_func_reg(struct ql_adapter *qdev,
+					u32 reg, u32 reg_val)
+{
+	u32 register_to_read;
+	int status = 0;
+
+	register_to_read = MPI_NIC_REG_BLOCK
+				| MPI_NIC_READ
+				| (qdev->alt_func << MPI_NIC_FUNCTION_SHIFT)
+				| reg;
+	status = ql_write_mpi_reg(qdev, register_to_read, reg_val);
+
+	return status;
+}
+
+static int ql_wait_other_func_reg_rdy(struct ql_adapter *qdev, u32 reg,
+					u32 bit, u32 err_bit)
+{
+	u32 temp;
+	int count = 10;
+
+	while (count) {
+		temp = ql_read_other_func_reg(qdev, reg);
+
+		/* check for errors */
+		if (temp & err_bit)
+			return -1;
+		else if (temp & bit)
+			return 0;
+		mdelay(10);
+		count--;
+	}
+	return -1;
+}
+
+static int ql_read_other_func_serdes_reg(struct ql_adapter *qdev, u32 reg,
+							u32 *data)
+{
+	int status;
+
+	/* wait for reg to come ready */
+	status = ql_wait_other_func_reg_rdy(qdev, XG_SERDES_ADDR / 4,
+						XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* set up for reg read */
+	ql_write_other_func_reg(qdev, XG_SERDES_ADDR/4, reg | PROC_ADDR_R);
+
+	/* wait for reg to come ready */
+	status = ql_wait_other_func_reg_rdy(qdev, XG_SERDES_ADDR / 4,
+						XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* get the data */
+	*data = ql_read_other_func_reg(qdev, (XG_SERDES_DATA / 4));
+exit:
+	return status;
+}
+
+/* Read out the SERDES registers */
+static int ql_read_serdes_reg(struct ql_adapter *qdev, u32 reg, u32 * data)
+{
+	int status;
+
+	/* wait for reg to come ready */
+	status = ql_wait_reg_rdy(qdev, XG_SERDES_ADDR, XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* set up for reg read */
+	ql_write32(qdev, XG_SERDES_ADDR, reg | PROC_ADDR_R);
+
+	/* wait for reg to come ready */
+	status = ql_wait_reg_rdy(qdev, XG_SERDES_ADDR, XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* get the data */
+	*data = ql_read32(qdev, XG_SERDES_DATA);
+exit:
+	return status;
+}
+
+static void ql_get_both_serdes(struct ql_adapter *qdev, u32 addr,
+			u32 *direct_ptr, u32 *indirect_ptr,
+			unsigned int direct_valid, unsigned int indirect_valid)
+{
+	unsigned int status;
+
+	status = 1;
+	if (direct_valid)
+		status = ql_read_serdes_reg(qdev, addr, direct_ptr);
+	/* Dead fill any failures or invalids. */
+	if (status)
+		*direct_ptr = 0xDEADBEEF;
+
+	status = 1;
+	if (indirect_valid)
+		status = ql_read_other_func_serdes_reg(
+						qdev, addr, indirect_ptr);
+	/* Dead fill any failures or invalids. */
+	if (status)
+		*indirect_ptr = 0xDEADBEEF;
+}
+
+static int ql_get_serdes_regs(struct ql_adapter *qdev,
+				struct ql_mpi_coredump *mpi_coredump)
+{
+	int status;
+	unsigned int xfi_direct_valid, xfi_indirect_valid, xaui_direct_valid;
+	unsigned int xaui_indirect_valid, i;
+	u32 *direct_ptr, temp;
+	u32 *indirect_ptr;
+
+	xfi_direct_valid = xfi_indirect_valid = 0;
+	xaui_direct_valid = xaui_indirect_valid = 1;
+
+	/* The XAUI needs to be read out per port */
+	if (qdev->func & 1) {
+		/* We are NIC 2	*/
+		status = ql_read_other_func_serdes_reg(qdev,
+				XG_SERDES_XAUI_HSS_PCS_START, &temp);
+		if (status)
+			temp = XG_SERDES_ADDR_XAUI_PWR_DOWN;
+		if ((temp & XG_SERDES_ADDR_XAUI_PWR_DOWN) ==
+					XG_SERDES_ADDR_XAUI_PWR_DOWN)
+			xaui_indirect_valid = 0;
+
+		status = ql_read_serdes_reg(qdev,
+				XG_SERDES_XAUI_HSS_PCS_START, &temp);
+		if (status)
+			temp = XG_SERDES_ADDR_XAUI_PWR_DOWN;
+
+		if ((temp & XG_SERDES_ADDR_XAUI_PWR_DOWN) ==
+					XG_SERDES_ADDR_XAUI_PWR_DOWN)
+			xaui_direct_valid = 0;
+	} else {
+		/* We are NIC 1	*/
+		status = ql_read_other_func_serdes_reg(qdev,
+				XG_SERDES_XAUI_HSS_PCS_START, &temp);
+		if (status)
+			temp = XG_SERDES_ADDR_XAUI_PWR_DOWN;
+		if ((temp & XG_SERDES_ADDR_XAUI_PWR_DOWN) ==
+					XG_SERDES_ADDR_XAUI_PWR_DOWN)
+			xaui_indirect_valid = 0;
+
+		status = ql_read_serdes_reg(qdev,
+				XG_SERDES_XAUI_HSS_PCS_START, &temp);
+		if (status)
+			temp = XG_SERDES_ADDR_XAUI_PWR_DOWN;
+		if ((temp & XG_SERDES_ADDR_XAUI_PWR_DOWN) ==
+					XG_SERDES_ADDR_XAUI_PWR_DOWN)
+			xaui_direct_valid = 0;
+	}
+
+	/*
+	 * XFI register is shared so only need to read one
+	 * functions and then check the bits.
+	 */
+	status = ql_read_serdes_reg(qdev, XG_SERDES_ADDR_STS, &temp);
+	if (status)
+		temp = 0;
+
+	if ((temp & XG_SERDES_ADDR_XFI1_PWR_UP) ==
+					XG_SERDES_ADDR_XFI1_PWR_UP) {
+		/* now see if i'm NIC 1 or NIC 2 */
+		if (qdev->func & 1)
+			/* I'm NIC 2, so the indirect (NIC1) xfi is up. */
+			xfi_indirect_valid = 1;
+		else
+			xfi_direct_valid = 1;
+	}
+	if ((temp & XG_SERDES_ADDR_XFI2_PWR_UP) ==
+					XG_SERDES_ADDR_XFI2_PWR_UP) {
+		/* now see if i'm NIC 1 or NIC 2 */
+		if (qdev->func & 1)
+			/* I'm NIC 2, so the indirect (NIC1) xfi is up. */
+			xfi_direct_valid = 1;
+		else
+			xfi_indirect_valid = 1;
+	}
+
+	/* Get XAUI_AN register block. */
+	if (qdev->func & 1) {
+		/* Function 2 is direct	*/
+		direct_ptr = mpi_coredump->serdes2_xaui_an;
+		indirect_ptr = mpi_coredump->serdes_xaui_an;
+	} else {
+		/* Function 1 is direct	*/
+		direct_ptr = mpi_coredump->serdes_xaui_an;
+		indirect_ptr = mpi_coredump->serdes2_xaui_an;
+	}
+
+	for (i = 0; i <= 0x000000034; i += 4, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xaui_direct_valid, xaui_indirect_valid);
+
+	/* Get XAUI_HSS_PCS register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xaui_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes_xaui_hss_pcs;
+	} else {
+		direct_ptr =
+			mpi_coredump->serdes_xaui_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes2_xaui_hss_pcs;
+	}
+
+	for (i = 0x800; i <= 0x880; i += 4, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xaui_direct_valid, xaui_indirect_valid);
+
+	/* Get XAUI_XFI_AN register block. */
+	if (qdev->func & 1) {
+		direct_ptr = mpi_coredump->serdes2_xfi_an;
+		indirect_ptr = mpi_coredump->serdes_xfi_an;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_an;
+		indirect_ptr = mpi_coredump->serdes2_xfi_an;
+	}
+
+	for (i = 0x1000; i <= 0x1034; i += 4, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_TRAIN register block. */
+	if (qdev->func & 1) {
+		direct_ptr = mpi_coredump->serdes2_xfi_train;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_train;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_train;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_train;
+	}
+
+	for (i = 0x1050; i <= 0x107c; i += 4, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_PCS register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_pcs;
+	} else {
+		direct_ptr =
+			mpi_coredump->serdes_xfi_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_pcs;
+	}
+
+	for (i = 0x1800; i <= 0x1838; i += 4, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_TX register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_tx;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_tx;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_hss_tx;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_tx;
+	}
+	for (i = 0x1c00; i <= 0x1c1f; i++, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_RX register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_rx;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_rx;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_hss_rx;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_rx;
+	}
+
+	for (i = 0x1c40; i <= 0x1c5f; i++, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xfi_direct_valid, xfi_indirect_valid);
+
+
+	/* Get XAUI_XFI_HSS_PLL register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_pll;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_pll;
+	} else {
+		direct_ptr =
+			mpi_coredump->serdes_xfi_hss_pll;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_pll;
+	}
+	for (i = 0x1e00; i <= 0x1e1f; i++, direct_ptr++, indirect_ptr++)
+		ql_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+					xfi_direct_valid, xfi_indirect_valid);
+	return 0;
+}
+
 static int ql_get_ets_regs(struct ql_adapter *qdev, u32 * buf)
 {
 	int status = 0;
@@ -413,6 +725,111 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 			ql_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
 	}
 
+	/* Rev C. Step 20a */
+	ql_build_coredump_seg_header(&mpi_coredump->xaui_an_hdr,
+			XAUI_AN_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xaui_an),
+			"XAUI AN Registers");
+
+	/* Rev C. Step 20b */
+	ql_build_coredump_seg_header(&mpi_coredump->xaui_hss_pcs_hdr,
+			XAUI_HSS_PCS_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xaui_hss_pcs),
+			"XAUI HSS PCS Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi_an_hdr, XFI_AN_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xfi_an),
+			"XFI AN Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi_train_hdr,
+			XFI_TRAIN_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xfi_train),
+			"XFI TRAIN Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi_hss_pcs_hdr,
+			XFI_HSS_PCS_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xfi_hss_pcs),
+			"XFI HSS PCS Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi_hss_tx_hdr,
+			XFI_HSS_TX_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xfi_hss_tx),
+			"XFI HSS TX Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi_hss_rx_hdr,
+			XFI_HSS_RX_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xfi_hss_rx),
+			"XFI HSS RX Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi_hss_pll_hdr,
+			XFI_HSS_PLL_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes_xfi_hss_pll),
+			"XFI HSS PLL Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xaui2_an_hdr,
+			XAUI2_AN_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xaui_an),
+			"XAUI2 AN Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xaui2_hss_pcs_hdr,
+			XAUI2_HSS_PCS_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xaui_hss_pcs),
+			"XAUI2 HSS PCS Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi2_an_hdr,
+			XFI2_AN_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xfi_an),
+			"XFI2 AN Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi2_train_hdr,
+			XFI2_TRAIN_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xfi_train),
+			"XFI2 TRAIN Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi2_hss_pcs_hdr,
+			XFI2_HSS_PCS_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xfi_hss_pcs),
+			"XFI2 HSS PCS Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi2_hss_tx_hdr,
+			XFI2_HSS_TX_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xfi_hss_tx),
+			"XFI2 HSS TX Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi2_hss_rx_hdr,
+			XFI2_HSS_RX_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xfi_hss_rx),
+			"XFI2 HSS RX Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xfi2_hss_pll_hdr,
+			XFI2_HSS_PLL_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->serdes2_xfi_hss_pll),
+			"XFI2 HSS PLL Registers");
+
+	status = ql_get_serdes_regs(qdev, mpi_coredump);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed Dump of Serdes Registers. Status = 0x%.08x\n",
+			status);
+		goto err;
+	}
+
 	ql_build_coredump_seg_header(&mpi_coredump->core_regs_seg_hdr,
 				CORE_SEG_NUM,
 				sizeof(mpi_coredump->core_regs_seg_hdr) +
-- 
cgit v1.2.3


From a2f982328427157eaa819c02986a65b9b168733a Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:33 +0000
Subject: qlge: Add xgmac reg blocks to firwmare dump.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_dbg.c | 87 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 87e50d9c3350..ec4349a254cc 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -331,6 +331,76 @@ static int ql_get_serdes_regs(struct ql_adapter *qdev,
 	return 0;
 }
 
+static int ql_read_other_func_xgmac_reg(struct ql_adapter *qdev, u32 reg,
+							u32 *data)
+{
+	int status = 0;
+
+	/* wait for reg to come ready */
+	status = ql_wait_other_func_reg_rdy(qdev, XGMAC_ADDR / 4,
+						XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		goto exit;
+
+	/* set up for reg read */
+	ql_write_other_func_reg(qdev, XGMAC_ADDR / 4, reg | XGMAC_ADDR_R);
+
+	/* wait for reg to come ready */
+	status = ql_wait_other_func_reg_rdy(qdev, XGMAC_ADDR / 4,
+						XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		goto exit;
+
+	/* get the data */
+	*data = ql_read_other_func_reg(qdev, XGMAC_DATA / 4);
+exit:
+	return status;
+}
+
+/* Read the 400 xgmac control/statistics registers
+ * skipping unused locations.
+ */
+static int ql_get_xgmac_regs(struct ql_adapter *qdev, u32 * buf,
+					unsigned int other_function)
+{
+	int status = 0;
+	int i;
+
+	for (i = PAUSE_SRC_LO; i < XGMAC_REGISTER_END; i += 4, buf++) {
+		/* We're reading 400 xgmac registers, but we filter out
+		 * serveral locations that are non-responsive to reads.
+		 */
+		if ((i == 0x00000114) ||
+			(i == 0x00000118) ||
+			(i == 0x0000013c) ||
+			(i == 0x00000140) ||
+			(i > 0x00000150 && i < 0x000001fc) ||
+			(i > 0x00000278 && i < 0x000002a0) ||
+			(i > 0x000002c0 && i < 0x000002cf) ||
+			(i > 0x000002dc && i < 0x000002f0) ||
+			(i > 0x000003c8 && i < 0x00000400) ||
+			(i > 0x00000400 && i < 0x00000410) ||
+			(i > 0x00000410 && i < 0x00000420) ||
+			(i > 0x00000420 && i < 0x00000430) ||
+			(i > 0x00000430 && i < 0x00000440) ||
+			(i > 0x00000440 && i < 0x00000450) ||
+			(i > 0x00000450 && i < 0x00000500) ||
+			(i > 0x0000054c && i < 0x00000568) ||
+			(i > 0x000005c8 && i < 0x00000600)) {
+			if (other_function)
+				status =
+				ql_read_other_func_xgmac_reg(qdev, i, buf);
+			else
+				status = ql_read_xgmac_reg(qdev, i, buf);
+
+			if (status)
+				*buf = 0xdeadbeef;
+			break;
+		}
+	}
+	return status;
+}
+
 static int ql_get_ets_regs(struct ql_adapter *qdev, u32 * buf)
 {
 	int status = 0;
@@ -706,6 +776,17 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 			sizeof(struct mpi_coredump_segment_header) +
 			sizeof(mpi_coredump->nic2_regs), "NIC2 Registers");
 
+	/* Get XGMac registers. (Segment 18, Rev C. step 21) */
+	ql_build_coredump_seg_header(&mpi_coredump->xgmac1_seg_hdr,
+			NIC1_XGMAC_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->xgmac1), "NIC1 XGMac Registers");
+
+	ql_build_coredump_seg_header(&mpi_coredump->xgmac2_seg_hdr,
+			NIC2_XGMAC_SEG_NUM,
+			sizeof(struct mpi_coredump_segment_header) +
+			sizeof(mpi_coredump->xgmac2), "NIC2 XGMac Registers");
+
 	if (qdev->func & 1) {
 		/* Odd means our function is NIC 2 */
 		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
@@ -715,6 +796,9 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
 			mpi_coredump->nic_regs[i] =
 			ql_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
+
+		ql_get_xgmac_regs(qdev, &mpi_coredump->xgmac2[0], 0);
+		ql_get_xgmac_regs(qdev, &mpi_coredump->xgmac1[0], 1);
 	} else {
 		/* Even means our function is NIC 1 */
 		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
@@ -723,6 +807,9 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
 			mpi_coredump->nic2_regs[i] =
 			ql_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
+
+		ql_get_xgmac_regs(qdev, &mpi_coredump->xgmac1[0], 0);
+		ql_get_xgmac_regs(qdev, &mpi_coredump->xgmac2[0], 1);
 	}
 
 	/* Rev C. Step 20a */
-- 
cgit v1.2.3


From d5c1da56afb8a6b232393fb3fdef4909389d05fe Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 15 Jan 2010 13:31:34 +0000
Subject: qlge: Add module param to force firmware core dump.

Default setting is 'off', don't allow force firmware dump.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      |  3 +++
 drivers/net/qlge/qlge_dbg.c  | 25 +++++++++++++++++++++++++
 drivers/net/qlge/qlge_main.c | 11 +++++++++--
 drivers/net/qlge/qlge_mpi.c  | 16 ++++++++++++++++
 4 files changed, 53 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 05feb03e9da6..9169c4cf413a 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2004,6 +2004,7 @@ enum {
 	QL_CAM_RT_SET = 8,
 	QL_SELFTEST = 9,
 	QL_LB_LINK_UP = 10,
+	QL_FRC_COREDUMP = 11,
 };
 
 /* link_status bit definitions */
@@ -2230,6 +2231,7 @@ int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf,
 		u32 ram_addr, int word_count);
 int ql_core_dump(struct ql_adapter *qdev,
 		struct ql_mpi_coredump *mpi_coredump);
+int ql_mb_sys_err(struct ql_adapter *qdev);
 int ql_mb_about_fw(struct ql_adapter *qdev);
 int ql_wol(struct ql_adapter *qdev);
 int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol);
@@ -2246,6 +2248,7 @@ void ql_gen_reg_dump(struct ql_adapter *qdev,
 			struct ql_reg_dump *mpi_coredump);
 netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev);
 void ql_check_lb_frame(struct ql_adapter *, struct sk_buff *);
+int ql_own_firmware(struct ql_adapter *qdev);
 int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget);
 
 #if 1
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index ec4349a254cc..57df835147eb 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -1222,6 +1222,28 @@ err:
 
 }
 
+static void ql_get_core_dump(struct ql_adapter *qdev)
+{
+	if (!ql_own_firmware(qdev)) {
+		QPRINTK(qdev, DRV, ERR, "%s: Don't own firmware!\n",
+					qdev->ndev->name);
+		return;
+	}
+
+	if (!netif_running(qdev->ndev)) {
+		QPRINTK(qdev, IFUP, ERR,
+			"Force Coredump can only be done from interface "
+			"that is up.\n");
+		return;
+	}
+
+	if (ql_mb_sys_err(qdev)) {
+		QPRINTK(qdev, IFUP, ERR,
+			"Fail force coredump with ql_mb_sys_err().\n");
+		return;
+	}
+}
+
 void ql_gen_reg_dump(struct ql_adapter *qdev,
 			struct ql_reg_dump *mpi_coredump)
 {
@@ -1297,6 +1319,9 @@ void ql_gen_reg_dump(struct ql_adapter *qdev,
 	status = ql_get_ets_regs(qdev, &mpi_coredump->ets[0]);
 	if (status)
 		return;
+
+	if (test_bit(QL_FRC_COREDUMP, &qdev->flags))
+		ql_get_core_dump(qdev);
 }
 
 /* Coredump to messages log file using separate worker thread */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index e58892304e19..95fb63dcd9e4 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -77,8 +77,13 @@ static int qlge_mpi_coredump;
 module_param(qlge_mpi_coredump, int, 0);
 MODULE_PARM_DESC(qlge_mpi_coredump,
 		"Option to enable MPI firmware dump. "
-		"Default is OFF - Do Not allocate memory. "
-		"Do not perform firmware coredump.");
+		"Default is OFF - Do Not allocate memory. ");
+
+static int qlge_force_coredump;
+module_param(qlge_force_coredump, int, 0);
+MODULE_PARM_DESC(qlge_force_coredump,
+		"Option to allow force of firmware core dump. "
+		"Default is OFF - Do not allow.");
 
 static DEFINE_PCI_DEVICE_TABLE(qlge_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
@@ -4496,6 +4501,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 			err = -ENOMEM;
 			goto err_out;
 		}
+		if (qlge_force_coredump)
+			set_bit(QL_FRC_COREDUMP, &qdev->flags);
 	}
 	/* make sure the EEPROM is good */
 	err = qdev->nic_ops->get_flash(qdev);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 3304eb7df581..e2c846f17fc7 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -607,6 +607,22 @@ end:
 	return status;
 }
 
+int ql_mb_sys_err(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 0;
+
+	mbcp->mbox_in[0] = MB_CMD_MAKE_SYS_ERR;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	return status;
+}
 
 /* Get MPI firmware version. This will be used for
  * driver banner and for ethtool info.
-- 
cgit v1.2.3


From 6eb3a8553345ba2b4efd5390709e158289b9ece4 Mon Sep 17 00:00:00 2001
From: Patrick Mullaney <pmullaney@novell.com>
Date: Sat, 16 Jan 2010 01:05:38 -0800
Subject: macvlan: add GRO bit to features mask

Allow macvlan devices to support GRO.

Signed-off-by: Patrick Mullaney <pmullaney@novell.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvlan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 21a9c9ab4b34..fa0dc514dbaf 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -418,7 +418,7 @@ static struct lock_class_key macvlan_netdev_addr_lock_key;
 #define MACVLAN_FEATURES \
 	(NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
 	 NETIF_F_GSO | NETIF_F_TSO | NETIF_F_UFO | NETIF_F_GSO_ROBUST | \
-	 NETIF_F_TSO_ECN | NETIF_F_TSO6)
+	 NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO)
 
 #define MACVLAN_STATE_MASK \
 	((1<<__LINK_STATE_NOCARRIER) | (1<<__LINK_STATE_DORMANT))
-- 
cgit v1.2.3


From af19b49152bdb68fda894183e88096d6d1aa5c3d Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Wed, 13 Jan 2010 00:37:25 +0000
Subject: qlcnic: Qlogic ethernet driver for CNA devices

o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/Makefile         |    8 +
 drivers/net/qlcnic/qlcnic.h         | 1106 +++++++++++++++
 drivers/net/qlcnic/qlcnic_ctx.c     |  536 +++++++
 drivers/net/qlcnic/qlcnic_ethtool.c |  870 ++++++++++++
 drivers/net/qlcnic/qlcnic_hdr.h     |  937 +++++++++++++
 drivers/net/qlcnic/qlcnic_hw.c      | 1201 ++++++++++++++++
 drivers/net/qlcnic/qlcnic_init.c    | 1466 ++++++++++++++++++++
 drivers/net/qlcnic/qlcnic_main.c    | 2604 +++++++++++++++++++++++++++++++++++
 8 files changed, 8728 insertions(+)
 create mode 100644 drivers/net/qlcnic/Makefile
 create mode 100644 drivers/net/qlcnic/qlcnic.h
 create mode 100644 drivers/net/qlcnic/qlcnic_ctx.c
 create mode 100644 drivers/net/qlcnic/qlcnic_ethtool.c
 create mode 100644 drivers/net/qlcnic/qlcnic_hdr.h
 create mode 100644 drivers/net/qlcnic/qlcnic_hw.c
 create mode 100644 drivers/net/qlcnic/qlcnic_init.c
 create mode 100644 drivers/net/qlcnic/qlcnic_main.c

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/Makefile b/drivers/net/qlcnic/Makefile
new file mode 100644
index 000000000000..ddba83ef3f44
--- /dev/null
+++ b/drivers/net/qlcnic/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Qlogic 1G/10G Ethernet Driver for CNA devices
+#
+
+obj-$(CONFIG_QLCNIC) := qlcnic.o
+
+qlcnic-y := qlcnic_hw.o qlcnic_main.o qlcnic_init.o \
+	qlcnic_ethtool.o qlcnic_ctx.o
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
new file mode 100644
index 000000000000..abec46846539
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -0,0 +1,1106 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#ifndef _QLCNIC_H_
+#define _QLCNIC_H_
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/timer.h>
+
+#include <linux/vmalloc.h>
+
+#include <linux/io.h>
+#include <asm/byteorder.h>
+
+#include "qlcnic_hdr.h"
+
+#define _QLCNIC_LINUX_MAJOR 5
+#define _QLCNIC_LINUX_MINOR 0
+#define _QLCNIC_LINUX_SUBVERSION 0
+#define QLCNIC_LINUX_VERSIONID  "5.0.0"
+
+#define QLCNIC_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
+#define _major(v)	(((v) >> 24) & 0xff)
+#define _minor(v)	(((v) >> 16) & 0xff)
+#define _build(v)	((v) & 0xffff)
+
+/* version in image has weird encoding:
+ *  7:0  - major
+ * 15:8  - minor
+ * 31:16 - build (little endian)
+ */
+#define QLCNIC_DECODE_VERSION(v) \
+	QLCNIC_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
+
+#define QLCNIC_NUM_FLASH_SECTORS (64)
+#define QLCNIC_FLASH_SECTOR_SIZE (64 * 1024)
+#define QLCNIC_FLASH_TOTAL_SIZE  (QLCNIC_NUM_FLASH_SECTORS \
+					* QLCNIC_FLASH_SECTOR_SIZE)
+
+#define RCV_DESC_RINGSIZE(rds_ring)	\
+	(sizeof(struct rcv_desc) * (rds_ring)->num_desc)
+#define RCV_BUFF_RINGSIZE(rds_ring)	\
+	(sizeof(struct qlcnic_rx_buffer) * rds_ring->num_desc)
+#define STATUS_DESC_RINGSIZE(sds_ring)	\
+	(sizeof(struct status_desc) * (sds_ring)->num_desc)
+#define TX_BUFF_RINGSIZE(tx_ring)	\
+	(sizeof(struct qlcnic_cmd_buffer) * tx_ring->num_desc)
+#define TX_DESC_RINGSIZE(tx_ring)	\
+	(sizeof(struct cmd_desc_type0) * tx_ring->num_desc)
+
+#define QLCNIC_P3P_A0		0x50
+
+#define QLCNIC_IS_REVISION_P3P(REVISION)     (REVISION >= QLCNIC_P3P_A0)
+
+#define FIRST_PAGE_GROUP_START	0
+#define FIRST_PAGE_GROUP_END	0x100000
+
+#define P3_MAX_MTU                     (9600)
+#define QLCNIC_MAX_ETHERHDR                32 /* This contains some padding */
+
+#define QLCNIC_P3_RX_BUF_MAX_LEN         (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
+#define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN   (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU)
+#define QLCNIC_CT_DEFAULT_RX_BUF_LEN	2048
+#define QLCNIC_LRO_BUFFER_EXTRA		2048
+
+#define QLCNIC_RX_LRO_BUFFER_LENGTH		(8060)
+
+/* Opcodes to be used with the commands */
+#define TX_ETHER_PKT	0x01
+#define TX_TCP_PKT	0x02
+#define TX_UDP_PKT	0x03
+#define TX_IP_PKT	0x04
+#define TX_TCP_LSO	0x05
+#define TX_TCP_LSO6	0x06
+#define TX_IPSEC	0x07
+#define TX_IPSEC_CMD	0x0a
+#define TX_TCPV6_PKT	0x0b
+#define TX_UDPV6_PKT	0x0c
+
+/* Tx defines */
+#define MAX_BUFFERS_PER_CMD	32
+#define TX_STOP_THRESH		((MAX_SKB_FRAGS >> 2) + 4)
+#define QLCNIC_MAX_TX_TIMEOUTS	2
+
+/*
+ * Following are the states of the Phantom. Phantom will set them and
+ * Host will read to check if the fields are correct.
+ */
+#define PHAN_INITIALIZE_FAILED		0xffff
+#define PHAN_INITIALIZE_COMPLETE	0xff01
+
+/* Host writes the following to notify that it has done the init-handshake */
+#define PHAN_INITIALIZE_ACK		0xf00f
+#define PHAN_PEG_RCV_INITIALIZED	0xff01
+
+#define NUM_RCV_DESC_RINGS	3
+#define NUM_STS_DESC_RINGS	4
+
+#define RCV_RING_NORMAL 0
+#define RCV_RING_JUMBO	1
+#define RCV_RING_LRO	2
+
+#define MIN_CMD_DESCRIPTORS		64
+#define MIN_RCV_DESCRIPTORS		64
+#define MIN_JUMBO_DESCRIPTORS		32
+
+#define MAX_CMD_DESCRIPTORS		1024
+#define MAX_RCV_DESCRIPTORS_1G		4096
+#define MAX_RCV_DESCRIPTORS_10G 	8192
+#define MAX_JUMBO_RCV_DESCRIPTORS_1G	512
+#define MAX_JUMBO_RCV_DESCRIPTORS_10G	1024
+#define MAX_LRO_RCV_DESCRIPTORS		8
+
+#define DEFAULT_RCV_DESCRIPTORS_1G	2048
+#define DEFAULT_RCV_DESCRIPTORS_10G	4096
+
+#define get_next_index(index, length)	\
+	(((index) + 1) & ((length) - 1))
+
+#define MPORT_MULTI_FUNCTION_MODE 0x2222
+
+/*
+ * Following data structures describe the descriptors that will be used.
+ * Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
+ * we are doing LSO (above the 1500 size packet) only.
+ */
+
+#define FLAGS_VLAN_TAGGED	0x10
+#define FLAGS_VLAN_OOB		0x40
+
+#define qlcnic_set_tx_vlan_tci(cmd_desc, v)	\
+	(cmd_desc)->vlan_TCI = cpu_to_le16(v);
+#define qlcnic_set_cmd_desc_port(cmd_desc, var)	\
+	((cmd_desc)->port_ctxid |= ((var) & 0x0F))
+#define qlcnic_set_cmd_desc_ctxid(cmd_desc, var)	\
+	((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
+
+#define qlcnic_set_tx_port(_desc, _port) \
+	((_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0))
+
+#define qlcnic_set_tx_flags_opcode(_desc, _flags, _opcode) \
+	((_desc)->flags_opcode = \
+	cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7)))
+
+#define qlcnic_set_tx_frags_len(_desc, _frags, _len) \
+	((_desc)->nfrags__length = \
+	cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8)))
+
+struct cmd_desc_type0 {
+	u8 tcp_hdr_offset;	/* For LSO only */
+	u8 ip_hdr_offset;	/* For LSO only */
+	__le16 flags_opcode;	/* 15:13 unused, 12:7 opcode, 6:0 flags */
+	__le32 nfrags__length;	/* 31:8 total len, 7:0 frag count */
+
+	__le64 addr_buffer2;
+
+	__le16 reference_handle;
+	__le16 mss;
+	u8 port_ctxid;		/* 7:4 ctxid 3:0 port */
+	u8 total_hdr_length;	/* LSO only : MAC+IP+TCP Hdr size */
+	__le16 conn_id;		/* IPSec offoad only */
+
+	__le64 addr_buffer3;
+	__le64 addr_buffer1;
+
+	__le16 buffer_length[4];
+
+	__le64 addr_buffer4;
+
+	__le32 reserved2;
+	__le16 reserved;
+	__le16 vlan_TCI;
+
+} __attribute__ ((aligned(64)));
+
+/* Note: sizeof(rcv_desc) should always be a mutliple of 2 */
+struct rcv_desc {
+	__le16 reference_handle;
+	__le16 reserved;
+	__le32 buffer_length;	/* allocated buffer length (usually 2K) */
+	__le64 addr_buffer;
+};
+
+/* opcode field in status_desc */
+#define QLCNIC_SYN_OFFLOAD	0x03
+#define QLCNIC_RXPKT_DESC  	0x04
+#define QLCNIC_OLD_RXPKT_DESC	0x3f
+#define QLCNIC_RESPONSE_DESC	0x05
+#define QLCNIC_LRO_DESC  	0x12
+
+/* for status field in status_desc */
+#define STATUS_CKSUM_OK		(2)
+
+/* owner bits of status_desc */
+#define STATUS_OWNER_HOST	(0x1ULL << 56)
+#define STATUS_OWNER_PHANTOM	(0x2ULL << 56)
+
+/* Status descriptor:
+   0-3 port, 4-7 status, 8-11 type, 12-27 total_length
+   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
+   53-55 desc_cnt, 56-57 owner, 58-63 opcode
+ */
+#define qlcnic_get_sts_port(sts_data)	\
+	((sts_data) & 0x0F)
+#define qlcnic_get_sts_status(sts_data)	\
+	(((sts_data) >> 4) & 0x0F)
+#define qlcnic_get_sts_type(sts_data)	\
+	(((sts_data) >> 8) & 0x0F)
+#define qlcnic_get_sts_totallength(sts_data)	\
+	(((sts_data) >> 12) & 0xFFFF)
+#define qlcnic_get_sts_refhandle(sts_data)	\
+	(((sts_data) >> 28) & 0xFFFF)
+#define qlcnic_get_sts_prot(sts_data)	\
+	(((sts_data) >> 44) & 0x0F)
+#define qlcnic_get_sts_pkt_offset(sts_data)	\
+	(((sts_data) >> 48) & 0x1F)
+#define qlcnic_get_sts_desc_cnt(sts_data)	\
+	(((sts_data) >> 53) & 0x7)
+#define qlcnic_get_sts_opcode(sts_data)	\
+	(((sts_data) >> 58) & 0x03F)
+
+#define qlcnic_get_lro_sts_refhandle(sts_data) 	\
+	((sts_data) & 0x0FFFF)
+#define qlcnic_get_lro_sts_length(sts_data)	\
+	(((sts_data) >> 16) & 0x0FFFF)
+#define qlcnic_get_lro_sts_l2_hdr_offset(sts_data)	\
+	(((sts_data) >> 32) & 0x0FF)
+#define qlcnic_get_lro_sts_l4_hdr_offset(sts_data)	\
+	(((sts_data) >> 40) & 0x0FF)
+#define qlcnic_get_lro_sts_timestamp(sts_data)	\
+	(((sts_data) >> 48) & 0x1)
+#define qlcnic_get_lro_sts_type(sts_data)	\
+	(((sts_data) >> 49) & 0x7)
+#define qlcnic_get_lro_sts_push_flag(sts_data)		\
+	(((sts_data) >> 52) & 0x1)
+#define qlcnic_get_lro_sts_seq_number(sts_data)		\
+	((sts_data) & 0x0FFFFFFFF)
+
+
+struct status_desc {
+	__le64 status_desc_data[2];
+} __attribute__ ((aligned(16)));
+
+/* UNIFIED ROMIMAGE */
+#define QLCNIC_UNI_FW_MIN_SIZE		0xc8000
+#define QLCNIC_UNI_DIR_SECT_PRODUCT_TBL	0x0
+#define QLCNIC_UNI_DIR_SECT_BOOTLD	0x6
+#define QLCNIC_UNI_DIR_SECT_FW		0x7
+
+/*Offsets */
+#define QLCNIC_UNI_CHIP_REV_OFF		10
+#define QLCNIC_UNI_FLAGS_OFF		11
+#define QLCNIC_UNI_BIOS_VERSION_OFF 	12
+#define QLCNIC_UNI_BOOTLD_IDX_OFF	27
+#define QLCNIC_UNI_FIRMWARE_IDX_OFF 	29
+
+struct uni_table_desc{
+	u32	findex;
+	u32	num_entries;
+	u32	entry_size;
+	u32	reserved[5];
+};
+
+struct uni_data_desc{
+	u32	findex;
+	u32	size;
+	u32	reserved[5];
+};
+
+/* Magic number to let user know flash is programmed */
+#define	QLCNIC_BDINFO_MAGIC 0x12345678
+
+#define QLCNIC_BRDTYPE_P3_REF_QG	0x0021
+#define QLCNIC_BRDTYPE_P3_HMEZ		0x0022
+#define QLCNIC_BRDTYPE_P3_10G_CX4_LP	0x0023
+#define QLCNIC_BRDTYPE_P3_4_GB		0x0024
+#define QLCNIC_BRDTYPE_P3_IMEZ		0x0025
+#define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS	0x0026
+#define QLCNIC_BRDTYPE_P3_10000_BASE_T	0x0027
+#define QLCNIC_BRDTYPE_P3_XG_LOM	0x0028
+#define QLCNIC_BRDTYPE_P3_4_GB_MM	0x0029
+#define QLCNIC_BRDTYPE_P3_10G_SFP_CT	0x002a
+#define QLCNIC_BRDTYPE_P3_10G_SFP_QT	0x002b
+#define QLCNIC_BRDTYPE_P3_10G_CX4	0x0031
+#define QLCNIC_BRDTYPE_P3_10G_XFP	0x0032
+#define QLCNIC_BRDTYPE_P3_10G_TP	0x0080
+
+/* Flash memory map */
+#define QLCNIC_BRDCFG_START	0x4000		/* board config */
+#define QLCNIC_BOOTLD_START	0x10000		/* bootld */
+#define QLCNIC_IMAGE_START	0x43000		/* compressed image */
+#define QLCNIC_USER_START	0x3E8000	/* Firmare info */
+
+#define QLCNIC_FW_VERSION_OFFSET	(QLCNIC_USER_START+0x408)
+#define QLCNIC_FW_SIZE_OFFSET		(QLCNIC_USER_START+0x40c)
+#define QLCNIC_FW_SERIAL_NUM_OFFSET	(QLCNIC_USER_START+0x81c)
+#define QLCNIC_BIOS_VERSION_OFFSET	(QLCNIC_USER_START+0x83c)
+
+#define QLCNIC_BRDTYPE_OFFSET		(QLCNIC_BRDCFG_START+0x8)
+#define QLCNIC_FW_MAGIC_OFFSET		(QLCNIC_BRDCFG_START+0x128)
+
+#define QLCNIC_FW_MIN_SIZE		(0x3fffff)
+#define QLCNIC_UNIFIED_ROMIMAGE  	0
+#define QLCNIC_FLASH_ROMIMAGE		1
+#define QLCNIC_UNKNOWN_ROMIMAGE		0xff
+
+#define QLCNIC_UNIFIED_ROMIMAGE_NAME	"phanfw.bin"
+#define QLCNIC_FLASH_ROMIMAGE_NAME	"flash"
+
+extern char qlcnic_driver_name[];
+
+/* Number of status descriptors to handle per interrupt */
+#define MAX_STATUS_HANDLE	(64)
+
+/*
+ * qlcnic_skb_frag{} is to contain mapping info for each SG list. This
+ * has to be freed when DMA is complete. This is part of qlcnic_tx_buffer{}.
+ */
+struct qlcnic_skb_frag {
+	u64 dma;
+	u64 length;
+};
+
+struct qlcnic_recv_crb {
+	u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
+	u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
+	u32 sw_int_mask[NUM_STS_DESC_RINGS];
+};
+
+/*    Following defines are for the state of the buffers    */
+#define	QLCNIC_BUFFER_FREE	0
+#define	QLCNIC_BUFFER_BUSY	1
+
+/*
+ * There will be one qlcnic_buffer per skb packet.    These will be
+ * used to save the dma info for pci_unmap_page()
+ */
+struct qlcnic_cmd_buffer {
+	struct sk_buff *skb;
+	struct qlcnic_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
+	u32 frag_count;
+};
+
+/* In rx_buffer, we do not need multiple fragments as is a single buffer */
+struct qlcnic_rx_buffer {
+	struct list_head list;
+	struct sk_buff *skb;
+	u64 dma;
+	u16 ref_handle;
+	u16 state;
+};
+
+/* Board types */
+#define	QLCNIC_GBE	0x01
+#define	QLCNIC_XGBE	0x02
+
+/*
+ * One hardware_context{} per adapter
+ * contains interrupt info as well shared hardware info.
+ */
+struct qlcnic_hardware_context {
+	void __iomem *pci_base0;
+	void __iomem *ocm_win_crb;
+
+	unsigned long pci_len0;
+
+	u32 ocm_win;
+	u32 crb_win;
+
+	rwlock_t crb_lock;
+	struct mutex mem_lock;
+
+	u8 cut_through;
+	u8 revision_id;
+	u8 pci_func;
+	u8 linkup;
+	u16 port_type;
+	u16 board_type;
+};
+
+struct qlcnic_adapter_stats {
+	u64  xmitcalled;
+	u64  xmitfinished;
+	u64  rxdropped;
+	u64  txdropped;
+	u64  csummed;
+	u64  rx_pkts;
+	u64  lro_pkts;
+	u64  rxbytes;
+	u64  txbytes;
+};
+
+/*
+ * Rcv Descriptor Context. One such per Rcv Descriptor. There may
+ * be one Rcv Descriptor for normal packets, one for jumbo and may be others.
+ */
+struct qlcnic_host_rds_ring {
+	u32 producer;
+	u32 num_desc;
+	u32 dma_size;
+	u32 skb_size;
+	u32 flags;
+	void __iomem *crb_rcv_producer;
+	struct rcv_desc *desc_head;
+	struct qlcnic_rx_buffer *rx_buf_arr;
+	struct list_head free_list;
+	spinlock_t lock;
+	dma_addr_t phys_addr;
+};
+
+struct qlcnic_host_sds_ring {
+	u32 consumer;
+	u32 num_desc;
+	void __iomem *crb_sts_consumer;
+	void __iomem *crb_intr_mask;
+
+	struct status_desc *desc_head;
+	struct qlcnic_adapter *adapter;
+	struct napi_struct napi;
+	struct list_head free_list[NUM_RCV_DESC_RINGS];
+
+	int irq;
+
+	dma_addr_t phys_addr;
+	char name[IFNAMSIZ+4];
+};
+
+struct qlcnic_host_tx_ring {
+	u32 producer;
+	__le32 *hw_consumer;
+	u32 sw_consumer;
+	void __iomem *crb_cmd_producer;
+	u32 num_desc;
+
+	struct netdev_queue *txq;
+
+	struct qlcnic_cmd_buffer *cmd_buf_arr;
+	struct cmd_desc_type0 *desc_head;
+	dma_addr_t phys_addr;
+	dma_addr_t hw_cons_phys_addr;
+};
+
+/*
+ * Receive context. There is one such structure per instance of the
+ * receive processing. Any state information that is relevant to
+ * the receive, and is must be in this structure. The global data may be
+ * present elsewhere.
+ */
+struct qlcnic_recv_context {
+	u32 state;
+	u16 context_id;
+	u16 virt_port;
+
+	struct qlcnic_host_rds_ring *rds_rings;
+	struct qlcnic_host_sds_ring *sds_rings;
+};
+
+/* HW context creation */
+
+#define QLCNIC_OS_CRB_RETRY_COUNT	4000
+#define QLCNIC_CDRP_SIGNATURE_MAKE(pcifn, version) \
+	(((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16))
+
+#define QLCNIC_CDRP_CMD_BIT		0x80000000
+
+/*
+ * All responses must have the QLCNIC_CDRP_CMD_BIT cleared
+ * in the crb QLCNIC_CDRP_CRB_OFFSET.
+ */
+#define QLCNIC_CDRP_FORM_RSP(rsp)	(rsp)
+#define QLCNIC_CDRP_IS_RSP(rsp)	(((rsp) & QLCNIC_CDRP_CMD_BIT) == 0)
+
+#define QLCNIC_CDRP_RSP_OK		0x00000001
+#define QLCNIC_CDRP_RSP_FAIL		0x00000002
+#define QLCNIC_CDRP_RSP_TIMEOUT 	0x00000003
+
+/*
+ * All commands must have the QLCNIC_CDRP_CMD_BIT set in
+ * the crb QLCNIC_CDRP_CRB_OFFSET.
+ */
+#define QLCNIC_CDRP_FORM_CMD(cmd)	(QLCNIC_CDRP_CMD_BIT | (cmd))
+#define QLCNIC_CDRP_IS_CMD(cmd)	(((cmd) & QLCNIC_CDRP_CMD_BIT) != 0)
+
+#define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES     0x00000001
+#define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX    0x00000002
+#define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX    0x00000003
+#define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX  0x00000004
+#define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX         0x00000005
+#define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX         0x00000006
+#define QLCNIC_CDRP_CMD_CREATE_RX_CTX           0x00000007
+#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX          0x00000008
+#define QLCNIC_CDRP_CMD_CREATE_TX_CTX           0x00000009
+#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX          0x0000000a
+#define QLCNIC_CDRP_CMD_SETUP_STATISTICS        0x0000000e
+#define QLCNIC_CDRP_CMD_GET_STATISTICS          0x0000000f
+#define QLCNIC_CDRP_CMD_DELETE_STATISTICS       0x00000010
+#define QLCNIC_CDRP_CMD_SET_MTU                 0x00000012
+#define QLCNIC_CDRP_CMD_READ_PHY		0x00000013
+#define QLCNIC_CDRP_CMD_WRITE_PHY		0x00000014
+#define QLCNIC_CDRP_CMD_READ_HW_REG		0x00000015
+#define QLCNIC_CDRP_CMD_GET_FLOW_CTL		0x00000016
+#define QLCNIC_CDRP_CMD_SET_FLOW_CTL		0x00000017
+#define QLCNIC_CDRP_CMD_READ_MAX_MTU		0x00000018
+#define QLCNIC_CDRP_CMD_READ_MAX_LRO		0x00000019
+#define QLCNIC_CDRP_CMD_CONFIGURE_TOE		0x0000001a
+#define QLCNIC_CDRP_CMD_FUNC_ATTRIB		0x0000001b
+#define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS	0x0000001c
+#define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES	0x0000001d
+#define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD	0x0000001e
+#define QLCNIC_CDRP_CMD_MAX			0x0000001f
+
+#define QLCNIC_RCODE_SUCCESS		0
+#define QLCNIC_RCODE_TIMEOUT		17
+#define QLCNIC_DESTROY_CTX_RESET	0
+
+/*
+ * Capabilities Announced
+ */
+#define QLCNIC_CAP0_LEGACY_CONTEXT	(1)
+#define QLCNIC_CAP0_LEGACY_MN		(1 << 2)
+#define QLCNIC_CAP0_LSO 		(1 << 6)
+#define QLCNIC_CAP0_JUMBO_CONTIGUOUS	(1 << 7)
+#define QLCNIC_CAP0_LRO_CONTIGUOUS	(1 << 8)
+
+/*
+ * Context state
+ */
+#define QLCNIC_HOST_CTX_STATE_ACTIVE	2
+
+/*
+ * Rx context
+ */
+
+struct qlcnic_hostrq_sds_ring {
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le16 msi_index;
+	__le16 rsvd;		/* Padding */
+};
+
+struct qlcnic_hostrq_rds_ring {
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le64 buff_size;		/* Packet buffer size */
+	__le32 ring_size;		/* Ring entries */
+	__le32 ring_kind;		/* Class of ring */
+};
+
+struct qlcnic_hostrq_rx_ctx {
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 host_rds_crb_mode;	/* RDS crb usage */
+	/* These ring offsets are relative to data[0] below */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
+	u8  reserved[128]; 	/* reserve space for future expansion*/
+	/* MUST BE 64-bit aligned.
+	   The following is packed:
+	   - N hostrq_rds_rings
+	   - N hostrq_sds_rings */
+	char data[0];
+};
+
+struct qlcnic_cardrsp_rds_ring{
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 rsvd1;		/* Padding */
+};
+
+struct qlcnic_cardrsp_sds_ring {
+	__le32 host_consumer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
+};
+
+struct qlcnic_cardrsp_rx_ctx {
+	/* These ring offsets are relative to data[0] below */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le32 host_ctx_state;	/* Starting State */
+	__le32 num_fn_per_port;	/* How many PCI fn share the port */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 context_id;		/* Handle for context */
+	u8  phys_port;		/* Physical id of port */
+	u8  virt_port;		/* Virtual/Logical id of port */
+	u8  reserved[128];	/* save space for future expansion */
+	/*  MUST BE 64-bit aligned.
+	   The following is packed:
+	   - N cardrsp_rds_rings
+	   - N cardrs_sds_rings */
+	char data[0];
+};
+
+#define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings)	\
+	(sizeof(HOSTRQ_RX) + 					\
+	(rds_rings)*(sizeof(struct qlcnic_hostrq_rds_ring)) +		\
+	(sds_rings)*(sizeof(struct qlcnic_hostrq_sds_ring)))
+
+#define SIZEOF_CARDRSP_RX(CARDRSP_RX, rds_rings, sds_rings) 	\
+	(sizeof(CARDRSP_RX) + 					\
+	(rds_rings)*(sizeof(struct qlcnic_cardrsp_rds_ring)) + 		\
+	(sds_rings)*(sizeof(struct qlcnic_cardrsp_sds_ring)))
+
+/*
+ * Tx context
+ */
+
+struct qlcnic_hostrq_cds_ring {
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le32 rsvd;		/* Padding */
+};
+
+struct qlcnic_hostrq_tx_ctx {
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le64 cmd_cons_dma_addr;	/*  */
+	__le64 dummy_dma_addr;	/*  */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
+	__le16 interrupt_ctl;
+	__le16 msi_index;
+	__le16 rsvd3;		/* Padding */
+	struct qlcnic_hostrq_cds_ring cds_ring;	/* Desc of cds ring */
+	u8  reserved[128];	/* future expansion */
+};
+
+struct qlcnic_cardrsp_cds_ring {
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
+};
+
+struct qlcnic_cardrsp_tx_ctx {
+	__le32 host_ctx_state;	/* Starting state */
+	__le16 context_id;		/* Handle for context */
+	u8  phys_port;		/* Physical id of port */
+	u8  virt_port;		/* Virtual/Logical id of port */
+	struct qlcnic_cardrsp_cds_ring cds_ring;	/* Card cds settings */
+	u8  reserved[128];	/* future expansion */
+};
+
+#define SIZEOF_HOSTRQ_TX(HOSTRQ_TX)	(sizeof(HOSTRQ_TX))
+#define SIZEOF_CARDRSP_TX(CARDRSP_TX)	(sizeof(CARDRSP_TX))
+
+/* CRB */
+
+#define QLCNIC_HOST_RDS_CRB_MODE_UNIQUE	0
+#define QLCNIC_HOST_RDS_CRB_MODE_SHARED	1
+#define QLCNIC_HOST_RDS_CRB_MODE_CUSTOM	2
+#define QLCNIC_HOST_RDS_CRB_MODE_MAX	3
+
+#define QLCNIC_HOST_INT_CRB_MODE_UNIQUE	0
+#define QLCNIC_HOST_INT_CRB_MODE_SHARED	1
+#define QLCNIC_HOST_INT_CRB_MODE_NORX	2
+#define QLCNIC_HOST_INT_CRB_MODE_NOTX	3
+#define QLCNIC_HOST_INT_CRB_MODE_NORXTX	4
+
+
+/* MAC */
+
+#define MC_COUNT_P3	38
+
+#define QLCNIC_MAC_NOOP	0
+#define QLCNIC_MAC_ADD	1
+#define QLCNIC_MAC_DEL	2
+
+struct qlcnic_mac_list_s {
+	struct list_head list;
+	uint8_t mac_addr[ETH_ALEN+2];
+};
+
+/*
+ * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
+ * adjusted based on configured MTU.
+ */
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US	3
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS	256
+#define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS	64
+#define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US	4
+
+#define QLCNIC_INTR_DEFAULT			0x04
+
+union qlcnic_nic_intr_coalesce_data {
+	struct {
+		u16	rx_packets;
+		u16	rx_time_us;
+		u16	tx_packets;
+		u16	tx_time_us;
+	} data;
+	u64		word;
+};
+
+struct qlcnic_nic_intr_coalesce {
+	u16		stats_time_us;
+	u16		rate_sample_time;
+	u16		flags;
+	u16		rsvd_1;
+	u32		low_threshold;
+	u32		high_threshold;
+	union qlcnic_nic_intr_coalesce_data	normal;
+	union qlcnic_nic_intr_coalesce_data	low;
+	union qlcnic_nic_intr_coalesce_data	high;
+	union qlcnic_nic_intr_coalesce_data	irq;
+};
+
+#define QLCNIC_HOST_REQUEST	0x13
+#define QLCNIC_REQUEST		0x14
+
+#define QLCNIC_MAC_EVENT	0x1
+
+#define QLCNIC_IP_UP		2
+#define QLCNIC_IP_DOWN		3
+
+/*
+ * Driver --> Firmware
+ */
+#define QLCNIC_H2C_OPCODE_START 			0
+#define QLCNIC_H2C_OPCODE_CONFIG_RSS			1
+#define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL		2
+#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE		3
+#define QLCNIC_H2C_OPCODE_CONFIG_LED			4
+#define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS		5
+#define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 		6
+#define QLCNIC_H2C_OPCODE_LRO_REQUEST			7
+#define QLCNIC_H2C_OPCODE_GET_SNMP_STATS		8
+#define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST		9
+#define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST		10
+#define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 		11
+#define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE	12
+#define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST	13
+#define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST	14
+#define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST	15
+#define QLCNIC_H2C_OPCODE_GET_NET_STATS 		16
+#define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V		17
+#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 		18
+#define QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK		19
+#define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE		20
+#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 		21
+#define QLCNIC_C2C_OPCODE				22
+#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING		23
+#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 		24
+#define QLCNIC_H2C_OPCODE_LAST				25
+/*
+ * Firmware --> Driver
+ */
+
+#define QLCNIC_C2H_OPCODE_START 			128
+#define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE		129
+#define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE	130
+#define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE		131
+#define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE	132
+#define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE	133
+#define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE		134
+#define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE	135
+#define QLCNIC_C2H_OPCODE_GET_SNMP_STATS		136
+#define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY	137
+#define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 	138
+#define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
+#define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE	140
+#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE	141
+#define QLCNIC_C2H_OPCODE_LAST				142
+
+#define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
+#define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
+#define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
+
+#define QLCNIC_LRO_REQUEST_CLEANUP	4
+
+/* Capabilites received */
+#define QLCNIC_FW_CAPABILITY_BDG		(1 << 8)
+#define QLCNIC_FW_CAPABILITY_FVLANTX		(1 << 9)
+#define QLCNIC_FW_CAPABILITY_HW_LRO		(1 << 10)
+
+/* module types */
+#define LINKEVENT_MODULE_NOT_PRESENT			1
+#define LINKEVENT_MODULE_OPTICAL_UNKNOWN		2
+#define LINKEVENT_MODULE_OPTICAL_SRLR			3
+#define LINKEVENT_MODULE_OPTICAL_LRM			4
+#define LINKEVENT_MODULE_OPTICAL_SFP_1G 		5
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE	6
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN	7
+#define LINKEVENT_MODULE_TWINAX 			8
+
+#define LINKSPEED_10GBPS	10000
+#define LINKSPEED_1GBPS 	1000
+#define LINKSPEED_100MBPS	100
+#define LINKSPEED_10MBPS	10
+
+#define LINKSPEED_ENCODED_10MBPS	0
+#define LINKSPEED_ENCODED_100MBPS	1
+#define LINKSPEED_ENCODED_1GBPS 	2
+
+#define LINKEVENT_AUTONEG_DISABLED	0
+#define LINKEVENT_AUTONEG_ENABLED	1
+
+#define LINKEVENT_HALF_DUPLEX		0
+#define LINKEVENT_FULL_DUPLEX		1
+
+#define LINKEVENT_LINKSPEED_MBPS	0
+#define LINKEVENT_LINKSPEED_ENCODED	1
+
+#define AUTO_FW_RESET_ENABLED	0x01
+/* firmware response header:
+ *	63:58 - message type
+ *	57:56 - owner
+ *	55:53 - desc count
+ *	52:48 - reserved
+ *	47:40 - completion id
+ *	39:32 - opcode
+ *	31:16 - error code
+ *	15:00 - reserved
+ */
+#define qlcnic_get_nic_msg_opcode(msg_hdr)	\
+	((msg_hdr >> 32) & 0xFF)
+
+struct qlcnic_fw_msg {
+	union {
+		struct {
+			u64 hdr;
+			u64 body[7];
+		};
+		u64 words[8];
+	};
+};
+
+struct qlcnic_nic_req {
+	__le64 qhdr;
+	__le64 req_hdr;
+	__le64 words[6];
+};
+
+struct qlcnic_mac_req {
+	u8 op;
+	u8 tag;
+	u8 mac_addr[6];
+};
+
+#define QLCNIC_MSI_ENABLED		0x02
+#define QLCNIC_MSIX_ENABLED		0x04
+#define QLCNIC_LRO_ENABLED		0x08
+#define QLCNIC_BRIDGE_ENABLED       	0X10
+#define QLCNIC_DIAG_ENABLED		0x20
+#define QLCNIC_IS_MSI_FAMILY(adapter) \
+	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
+
+#define MSIX_ENTRIES_PER_ADAPTER	NUM_STS_DESC_RINGS
+#define QLCNIC_MSIX_TBL_SPACE		8192
+#define QLCNIC_PCI_REG_MSIX_TBL 	0x44
+
+#define QLCNIC_NETDEV_WEIGHT	128
+#define QLCNIC_ADAPTER_UP_MAGIC 777
+
+#define __QLCNIC_FW_ATTACHED		0
+#define __QLCNIC_DEV_UP 		1
+#define __QLCNIC_RESETTING		2
+#define __QLCNIC_START_FW 		4
+
+struct qlcnic_adapter {
+	struct qlcnic_hardware_context ahw;
+
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct list_head mac_list;
+
+	spinlock_t tx_clean_lock;
+
+	u16 num_txd;
+	u16 num_rxd;
+	u16 num_jumbo_rxd;
+	u16 num_lro_rxd;
+
+	u8 max_rds_rings;
+	u8 max_sds_rings;
+	u8 driver_mismatch;
+	u8 msix_supported;
+	u8 rx_csum;
+	u8 pci_using_dac;
+	u8 portnum;
+	u8 physical_port;
+
+	u8 mc_enabled;
+	u8 max_mc_count;
+	u8 rss_supported;
+	u8 rsrvd1;
+	u8 fw_wait_cnt;
+	u8 fw_fail_cnt;
+	u8 tx_timeo_cnt;
+	u8 need_fw_reset;
+
+	u8 has_link_events;
+	u8 fw_type;
+	u16 tx_context_id;
+	u16 mtu;
+	u16 is_up;
+
+	u16 link_speed;
+	u16 link_duplex;
+	u16 link_autoneg;
+	u16 module_type;
+
+	u32 capabilities;
+	u32 flags;
+	u32 irq;
+	u32 temp;
+
+	u32 int_vec_bit;
+	u32 heartbit;
+
+	u8 dev_state;
+	u8 rsrd1;
+	u32 rsrd2;
+
+
+	u8 mac_addr[ETH_ALEN];
+
+	struct qlcnic_adapter_stats stats;
+
+	struct qlcnic_recv_context recv_ctx;
+	struct qlcnic_host_tx_ring *tx_ring;
+
+	void __iomem	*tgt_mask_reg;
+	void __iomem	*tgt_status_reg;
+	void __iomem	*crb_int_state_reg;
+	void __iomem	*isr_int_vec;
+
+	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+
+	struct delayed_work fw_work;
+
+	struct work_struct  tx_timeout_task;
+
+	struct qlcnic_nic_intr_coalesce coal;
+
+	unsigned long state;
+	__le32 file_prd_off;	/*File fw product offset*/
+	u32 fw_version;
+	const struct firmware *fw;
+};
+
+int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
+int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
+
+u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
+int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
+int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data);
+int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data);
+
+#define QLCRD32(adapter, off) \
+	(qlcnic_hw_read_wx_2M(adapter, off))
+#define QLCWR32(adapter, off, val) \
+	(qlcnic_hw_write_wx_2M(adapter, off, val))
+
+int qlcnic_pcie_sem_lock(struct qlcnic_adapter *, int, u32);
+void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int);
+
+#define qlcnic_rom_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 2, QLCNIC_ROM_LOCK_ID)
+#define qlcnic_rom_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 2)
+#define qlcnic_phy_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 3, QLCNIC_PHY_LOCK_ID)
+#define qlcnic_phy_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 3)
+#define qlcnic_api_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 5, 0)
+#define qlcnic_api_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 5)
+#define qlcnic_sw_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 6, 0)
+#define qlcnic_sw_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 6)
+#define crb_win_lock(a)	\
+	qlcnic_pcie_sem_lock((a), 7, QLCNIC_CRB_WIN_LOCK_ID)
+#define crb_win_unlock(a)	\
+	qlcnic_pcie_sem_unlock((a), 7)
+
+int qlcnic_get_board_info(struct qlcnic_adapter *adapter);
+int qlcnic_wol_supported(struct qlcnic_adapter *adapter);
+
+/* Functions from qlcnic_init.c */
+int qlcnic_phantom_init(struct qlcnic_adapter *adapter);
+int qlcnic_load_firmware(struct qlcnic_adapter *adapter);
+int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter);
+void qlcnic_request_firmware(struct qlcnic_adapter *adapter);
+void qlcnic_release_firmware(struct qlcnic_adapter *adapter);
+int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter);
+
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
+int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
+				u8 *bytes, size_t size);
+int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter);
+void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter);
+
+void __iomem *qlcnic_get_ioaddr(struct qlcnic_adapter *, u32);
+
+int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter);
+void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter);
+
+void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter);
+void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter);
+
+int qlcnic_init_firmware(struct qlcnic_adapter *adapter);
+void qlcnic_watchdog_task(struct work_struct *work);
+void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+		struct qlcnic_host_rds_ring *rds_ring);
+int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max);
+void qlcnic_set_multi(struct net_device *netdev);
+void qlcnic_free_mac_list(struct qlcnic_adapter *adapter);
+int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32);
+int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter);
+int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable);
+int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd);
+int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable);
+void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup);
+
+int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
+int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
+int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable);
+int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, int enable);
+int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
+void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_tx_ring *tx_ring);
+int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac);
+
+/* Functions from qlcnic_main.c */
+int qlcnic_reset_context(struct qlcnic_adapter *);
+
+/*
+ * QLOGIC Board information
+ */
+
+#define QLCNIC_MAX_BOARD_NAME_LEN 64
+struct qlcnic_brdinfo {
+	unsigned short  vendor;
+	unsigned short  device;
+	unsigned short  sub_vendor;
+	unsigned short  sub_device;
+	char short_name[QLCNIC_MAX_BOARD_NAME_LEN];
+};
+
+static const struct qlcnic_brdinfo qlcnic_boards[] = {
+	{0x1077, 0x8020, 0x1077, 0x203, "8200 Series Single Port 10GbE CNA"},
+	{0x1077, 0x8020, 0x1077, 0x207, "8200 Series Dual Port 10GbE CNA"},
+	{0x1077, 0x8020, 0x1077, 0x20b,
+		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
+	{0x1077, 0x8020, 0x1077, 0x20c,
+		"3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"},
+	{0x1077, 0x8020, 0x1077, 0x20f,
+		"3200 Series Single Port 10Gb Intelligent Ethernet Adapter"},
+	{0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"},
+};
+
+#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards)
+
+static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring)
+{
+	smp_mb();
+	if (tx_ring->producer < tx_ring->sw_consumer)
+		return tx_ring->sw_consumer - tx_ring->producer;
+	else
+		return tx_ring->sw_consumer + tx_ring->num_desc -
+				tx_ring->producer;
+}
+
+extern const struct ethtool_ops qlcnic_ethtool_ops;
+
+#endif				/* __QLCNIC_H_ */
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
new file mode 100644
index 000000000000..71c16a183458
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#include "qlcnic.h"
+
+#define QLCHAL_VERSION	1
+
+static u32
+qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
+{
+	u32 rsp;
+	int timeout = 0;
+
+	do {
+		/* give atleast 1ms for firmware to respond */
+		msleep(1);
+
+		if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT)
+			return QLCNIC_CDRP_RSP_TIMEOUT;
+
+		rsp = QLCRD32(adapter, QLCNIC_CDRP_CRB_OFFSET);
+	} while (!QLCNIC_CDRP_IS_RSP(rsp));
+
+	return rsp;
+}
+
+static u32
+qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
+	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd)
+{
+	u32 rsp;
+	u32 signature;
+	u32 rcode = QLCNIC_RCODE_SUCCESS;
+	struct pci_dev *pdev = adapter->pdev;
+
+	signature = QLCNIC_CDRP_SIGNATURE_MAKE(pci_fn, version);
+
+	/* Acquire semaphore before accessing CRB */
+	if (qlcnic_api_lock(adapter))
+		return QLCNIC_RCODE_TIMEOUT;
+
+	QLCWR32(adapter, QLCNIC_SIGN_CRB_OFFSET, signature);
+	QLCWR32(adapter, QLCNIC_ARG1_CRB_OFFSET, arg1);
+	QLCWR32(adapter, QLCNIC_ARG2_CRB_OFFSET, arg2);
+	QLCWR32(adapter, QLCNIC_ARG3_CRB_OFFSET, arg3);
+	QLCWR32(adapter, QLCNIC_CDRP_CRB_OFFSET, QLCNIC_CDRP_FORM_CMD(cmd));
+
+	rsp = qlcnic_poll_rsp(adapter);
+
+	if (rsp == QLCNIC_CDRP_RSP_TIMEOUT) {
+		dev_err(&pdev->dev, "card response timeout.\n");
+		rcode = QLCNIC_RCODE_TIMEOUT;
+	} else if (rsp == QLCNIC_CDRP_RSP_FAIL) {
+		rcode = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
+		dev_err(&pdev->dev, "failed card response code:0x%x\n",
+				rcode);
+	}
+
+	/* Release semaphore */
+	qlcnic_api_unlock(adapter);
+
+	return rcode;
+}
+
+int
+qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu)
+{
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	if (recv_ctx->state == QLCNIC_HOST_CTX_STATE_ACTIVE) {
+		if (qlcnic_issue_cmd(adapter,
+				adapter->ahw.pci_func,
+				QLCHAL_VERSION,
+				recv_ctx->context_id,
+				mtu,
+				0,
+				QLCNIC_CDRP_CMD_SET_MTU)) {
+
+			dev_err(&adapter->pdev->dev, "Failed to set mtu\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int
+qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
+{
+	void *addr;
+	struct qlcnic_hostrq_rx_ctx *prq;
+	struct qlcnic_cardrsp_rx_ctx *prsp;
+	struct qlcnic_hostrq_rds_ring *prq_rds;
+	struct qlcnic_hostrq_sds_ring *prq_sds;
+	struct qlcnic_cardrsp_rds_ring *prsp_rds;
+	struct qlcnic_cardrsp_sds_ring *prsp_sds;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+
+	dma_addr_t hostrq_phys_addr, cardrsp_phys_addr;
+	u64 phys_addr;
+
+	int i, nrds_rings, nsds_rings;
+	size_t rq_size, rsp_size;
+	u32 cap, reg, val;
+	int err;
+
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	nrds_rings = adapter->max_rds_rings;
+	nsds_rings = adapter->max_sds_rings;
+
+	rq_size =
+		SIZEOF_HOSTRQ_RX(struct qlcnic_hostrq_rx_ctx, nrds_rings,
+						nsds_rings);
+	rsp_size =
+		SIZEOF_CARDRSP_RX(struct qlcnic_cardrsp_rx_ctx, nrds_rings,
+						nsds_rings);
+
+	addr = pci_alloc_consistent(adapter->pdev,
+				rq_size, &hostrq_phys_addr);
+	if (addr == NULL)
+		return -ENOMEM;
+	prq = (struct qlcnic_hostrq_rx_ctx *)addr;
+
+	addr = pci_alloc_consistent(adapter->pdev,
+			rsp_size, &cardrsp_phys_addr);
+	if (addr == NULL) {
+		err = -ENOMEM;
+		goto out_free_rq;
+	}
+	prsp = (struct qlcnic_cardrsp_rx_ctx *)addr;
+
+	prq->host_rsp_dma_addr = cpu_to_le64(cardrsp_phys_addr);
+
+	cap = (QLCNIC_CAP0_LEGACY_CONTEXT | QLCNIC_CAP0_LEGACY_MN);
+	cap |= (QLCNIC_CAP0_JUMBO_CONTIGUOUS | QLCNIC_CAP0_LRO_CONTIGUOUS);
+
+	prq->capabilities[0] = cpu_to_le32(cap);
+	prq->host_int_crb_mode =
+		cpu_to_le32(QLCNIC_HOST_INT_CRB_MODE_SHARED);
+	prq->host_rds_crb_mode =
+		cpu_to_le32(QLCNIC_HOST_RDS_CRB_MODE_UNIQUE);
+
+	prq->num_rds_rings = cpu_to_le16(nrds_rings);
+	prq->num_sds_rings = cpu_to_le16(nsds_rings);
+	prq->rds_ring_offset = cpu_to_le32(0);
+
+	val = le32_to_cpu(prq->rds_ring_offset) +
+		(sizeof(struct qlcnic_hostrq_rds_ring) * nrds_rings);
+	prq->sds_ring_offset = cpu_to_le32(val);
+
+	prq_rds = (struct qlcnic_hostrq_rds_ring *)(prq->data +
+			le32_to_cpu(prq->rds_ring_offset));
+
+	for (i = 0; i < nrds_rings; i++) {
+
+		rds_ring = &recv_ctx->rds_rings[i];
+
+		prq_rds[i].host_phys_addr = cpu_to_le64(rds_ring->phys_addr);
+		prq_rds[i].ring_size = cpu_to_le32(rds_ring->num_desc);
+		prq_rds[i].ring_kind = cpu_to_le32(i);
+		prq_rds[i].buff_size = cpu_to_le64(rds_ring->dma_size);
+	}
+
+	prq_sds = (struct qlcnic_hostrq_sds_ring *)(prq->data +
+			le32_to_cpu(prq->sds_ring_offset));
+
+	for (i = 0; i < nsds_rings; i++) {
+
+		sds_ring = &recv_ctx->sds_rings[i];
+
+		prq_sds[i].host_phys_addr = cpu_to_le64(sds_ring->phys_addr);
+		prq_sds[i].ring_size = cpu_to_le32(sds_ring->num_desc);
+		prq_sds[i].msi_index = cpu_to_le16(i);
+	}
+
+	phys_addr = hostrq_phys_addr;
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			QLCHAL_VERSION,
+			(u32)(phys_addr >> 32),
+			(u32)(phys_addr & 0xffffffff),
+			rq_size,
+			QLCNIC_CDRP_CMD_CREATE_RX_CTX);
+	if (err) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to create rx ctx in firmware%d\n", err);
+		goto out_free_rsp;
+	}
+
+
+	prsp_rds = ((struct qlcnic_cardrsp_rds_ring *)
+			 &prsp->data[le32_to_cpu(prsp->rds_ring_offset)]);
+
+	for (i = 0; i < le16_to_cpu(prsp->num_rds_rings); i++) {
+		rds_ring = &recv_ctx->rds_rings[i];
+
+		reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
+		rds_ring->crb_rcv_producer = qlcnic_get_ioaddr(adapter,
+				QLCNIC_REG(reg - 0x200));
+	}
+
+	prsp_sds = ((struct qlcnic_cardrsp_sds_ring *)
+			&prsp->data[le32_to_cpu(prsp->sds_ring_offset)]);
+
+	for (i = 0; i < le16_to_cpu(prsp->num_sds_rings); i++) {
+		sds_ring = &recv_ctx->sds_rings[i];
+
+		reg = le32_to_cpu(prsp_sds[i].host_consumer_crb);
+		sds_ring->crb_sts_consumer = qlcnic_get_ioaddr(adapter,
+				QLCNIC_REG(reg - 0x200));
+
+		reg = le32_to_cpu(prsp_sds[i].interrupt_crb);
+		sds_ring->crb_intr_mask = qlcnic_get_ioaddr(adapter,
+				QLCNIC_REG(reg - 0x200));
+	}
+
+	recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
+	recv_ctx->context_id = le16_to_cpu(prsp->context_id);
+	recv_ctx->virt_port = prsp->virt_port;
+
+out_free_rsp:
+	pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
+out_free_rq:
+	pci_free_consistent(adapter->pdev, rq_size, prq, hostrq_phys_addr);
+	return err;
+}
+
+static void
+qlcnic_fw_cmd_destroy_rx_ctx(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	if (qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			QLCHAL_VERSION,
+			recv_ctx->context_id,
+			QLCNIC_DESTROY_CTX_RESET,
+			0,
+			QLCNIC_CDRP_CMD_DESTROY_RX_CTX)) {
+
+		dev_err(&adapter->pdev->dev,
+			"Failed to destroy rx ctx in firmware\n");
+	}
+}
+
+static int
+qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_hostrq_tx_ctx	*prq;
+	struct qlcnic_hostrq_cds_ring	*prq_cds;
+	struct qlcnic_cardrsp_tx_ctx	*prsp;
+	void	*rq_addr, *rsp_addr;
+	size_t	rq_size, rsp_size;
+	u32	temp;
+	int	err;
+	u64	phys_addr;
+	dma_addr_t	rq_phys_addr, rsp_phys_addr;
+	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
+
+	rq_size = SIZEOF_HOSTRQ_TX(struct qlcnic_hostrq_tx_ctx);
+	rq_addr = pci_alloc_consistent(adapter->pdev,
+		rq_size, &rq_phys_addr);
+	if (!rq_addr)
+		return -ENOMEM;
+
+	rsp_size = SIZEOF_CARDRSP_TX(struct qlcnic_cardrsp_tx_ctx);
+	rsp_addr = pci_alloc_consistent(adapter->pdev,
+		rsp_size, &rsp_phys_addr);
+	if (!rsp_addr) {
+		err = -ENOMEM;
+		goto out_free_rq;
+	}
+
+	memset(rq_addr, 0, rq_size);
+	prq = (struct qlcnic_hostrq_tx_ctx *)rq_addr;
+
+	memset(rsp_addr, 0, rsp_size);
+	prsp = (struct qlcnic_cardrsp_tx_ctx *)rsp_addr;
+
+	prq->host_rsp_dma_addr = cpu_to_le64(rsp_phys_addr);
+
+	temp = (QLCNIC_CAP0_LEGACY_CONTEXT | QLCNIC_CAP0_LEGACY_MN |
+					QLCNIC_CAP0_LSO);
+	prq->capabilities[0] = cpu_to_le32(temp);
+
+	prq->host_int_crb_mode =
+		cpu_to_le32(QLCNIC_HOST_INT_CRB_MODE_SHARED);
+
+	prq->interrupt_ctl = 0;
+	prq->msi_index = 0;
+	prq->cmd_cons_dma_addr = cpu_to_le64(tx_ring->hw_cons_phys_addr);
+
+	prq_cds = &prq->cds_ring;
+
+	prq_cds->host_phys_addr = cpu_to_le64(tx_ring->phys_addr);
+	prq_cds->ring_size = cpu_to_le32(tx_ring->num_desc);
+
+	phys_addr = rq_phys_addr;
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			QLCHAL_VERSION,
+			(u32)(phys_addr >> 32),
+			((u32)phys_addr & 0xffffffff),
+			rq_size,
+			QLCNIC_CDRP_CMD_CREATE_TX_CTX);
+
+	if (err == QLCNIC_RCODE_SUCCESS) {
+		temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
+		tx_ring->crb_cmd_producer = qlcnic_get_ioaddr(adapter,
+				QLCNIC_REG(temp - 0x200));
+
+		adapter->tx_context_id =
+			le16_to_cpu(prsp->context_id);
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"Failed to create tx ctx in firmware%d\n", err);
+		err = -EIO;
+	}
+
+	pci_free_consistent(adapter->pdev, rsp_size, rsp_addr, rsp_phys_addr);
+
+out_free_rq:
+	pci_free_consistent(adapter->pdev, rq_size, rq_addr, rq_phys_addr);
+
+	return err;
+}
+
+static void
+qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
+{
+	if (qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			QLCHAL_VERSION,
+			adapter->tx_context_id,
+			QLCNIC_DESTROY_CTX_RESET,
+			0,
+			QLCNIC_CDRP_CMD_DESTROY_TX_CTX)) {
+
+		dev_err(&adapter->pdev->dev,
+			"Failed to destroy tx ctx in firmware\n");
+	}
+}
+
+int
+qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
+{
+
+	if (qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			QLCHAL_VERSION,
+			reg,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_READ_PHY)) {
+
+		return -EIO;
+	}
+
+	return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
+}
+
+int
+qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val)
+{
+	return qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			QLCHAL_VERSION,
+			reg,
+			val,
+			0,
+			QLCNIC_CDRP_CMD_WRITE_PHY);
+}
+
+int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
+{
+	void *addr;
+	int err;
+	int ring;
+	struct qlcnic_recv_context *recv_ctx;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_host_tx_ring *tx_ring;
+
+	struct pci_dev *pdev = adapter->pdev;
+
+	recv_ctx = &adapter->recv_ctx;
+	tx_ring = adapter->tx_ring;
+
+	tx_ring->hw_consumer = (__le32 *)pci_alloc_consistent(pdev, sizeof(u32),
+						&tx_ring->hw_cons_phys_addr);
+	if (tx_ring->hw_consumer == NULL) {
+		dev_err(&pdev->dev, "failed to allocate tx consumer\n");
+		return -ENOMEM;
+	}
+	*(tx_ring->hw_consumer) = 0;
+
+	/* cmd desc ring */
+	addr = pci_alloc_consistent(pdev, TX_DESC_RINGSIZE(tx_ring),
+			&tx_ring->phys_addr);
+
+	if (addr == NULL) {
+		dev_err(&pdev->dev, "failed to allocate tx desc ring\n");
+		return -ENOMEM;
+	}
+
+	tx_ring->desc_head = (struct cmd_desc_type0 *)addr;
+
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		rds_ring = &recv_ctx->rds_rings[ring];
+		addr = pci_alloc_consistent(adapter->pdev,
+				RCV_DESC_RINGSIZE(rds_ring),
+				&rds_ring->phys_addr);
+		if (addr == NULL) {
+			dev_err(&pdev->dev,
+				"failed to allocate rds ring [%d]\n", ring);
+			err = -ENOMEM;
+			goto err_out_free;
+		}
+		rds_ring->desc_head = (struct rcv_desc *)addr;
+
+	}
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+
+		addr = pci_alloc_consistent(adapter->pdev,
+				STATUS_DESC_RINGSIZE(sds_ring),
+				&sds_ring->phys_addr);
+		if (addr == NULL) {
+			dev_err(&pdev->dev,
+				"failed to allocate sds ring [%d]\n", ring);
+			err = -ENOMEM;
+			goto err_out_free;
+		}
+		sds_ring->desc_head = (struct status_desc *)addr;
+	}
+
+
+	err = qlcnic_fw_cmd_create_rx_ctx(adapter);
+	if (err)
+		goto err_out_free;
+	err = qlcnic_fw_cmd_create_tx_ctx(adapter);
+	if (err)
+		goto err_out_free;
+
+	set_bit(__QLCNIC_FW_ATTACHED, &adapter->state);
+	return 0;
+
+err_out_free:
+	qlcnic_free_hw_resources(adapter);
+	return err;
+}
+
+void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_recv_context *recv_ctx;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_host_tx_ring *tx_ring;
+	int ring;
+
+
+	if (test_and_clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state)) {
+		qlcnic_fw_cmd_destroy_rx_ctx(adapter);
+		qlcnic_fw_cmd_destroy_tx_ctx(adapter);
+
+		/* Allow dma queues to drain after context reset */
+		msleep(20);
+	}
+
+	recv_ctx = &adapter->recv_ctx;
+
+	tx_ring = adapter->tx_ring;
+	if (tx_ring->hw_consumer != NULL) {
+		pci_free_consistent(adapter->pdev,
+				sizeof(u32),
+				tx_ring->hw_consumer,
+				tx_ring->hw_cons_phys_addr);
+		tx_ring->hw_consumer = NULL;
+	}
+
+	if (tx_ring->desc_head != NULL) {
+		pci_free_consistent(adapter->pdev,
+				TX_DESC_RINGSIZE(tx_ring),
+				tx_ring->desc_head, tx_ring->phys_addr);
+		tx_ring->desc_head = NULL;
+	}
+
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		rds_ring = &recv_ctx->rds_rings[ring];
+
+		if (rds_ring->desc_head != NULL) {
+			pci_free_consistent(adapter->pdev,
+					RCV_DESC_RINGSIZE(rds_ring),
+					rds_ring->desc_head,
+					rds_ring->phys_addr);
+			rds_ring->desc_head = NULL;
+		}
+	}
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+
+		if (sds_ring->desc_head != NULL) {
+			pci_free_consistent(adapter->pdev,
+				STATUS_DESC_RINGSIZE(sds_ring),
+				sds_ring->desc_head,
+				sds_ring->phys_addr);
+			sds_ring->desc_head = NULL;
+		}
+	}
+}
+
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
new file mode 100644
index 000000000000..65e9620e28f1
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -0,0 +1,870 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+
+#include "qlcnic.h"
+
+struct qlcnic_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define QLC_SIZEOF(m) FIELD_SIZEOF(struct qlcnic_adapter, m)
+#define QLC_OFF(m) offsetof(struct qlcnic_adapter, m)
+
+static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
+	{"xmit_called",
+		QLC_SIZEOF(stats.xmitcalled), QLC_OFF(stats.xmitcalled)},
+	{"xmit_finished",
+		QLC_SIZEOF(stats.xmitfinished), QLC_OFF(stats.xmitfinished)},
+	{"rx_dropped",
+		QLC_SIZEOF(stats.rxdropped), QLC_OFF(stats.rxdropped)},
+	{"tx_dropped",
+		QLC_SIZEOF(stats.txdropped), QLC_OFF(stats.txdropped)},
+	{"csummed",
+		QLC_SIZEOF(stats.csummed), QLC_OFF(stats.csummed)},
+	{"rx_pkts",
+		QLC_SIZEOF(stats.rx_pkts), QLC_OFF(stats.rx_pkts)},
+	{"lro_pkts",
+		QLC_SIZEOF(stats.lro_pkts), QLC_OFF(stats.lro_pkts)},
+	{"rx_bytes",
+		QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)},
+	{"tx_bytes",
+		QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)},
+};
+
+#define QLCNIC_STATS_LEN	ARRAY_SIZE(qlcnic_gstrings_stats)
+
+static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register_Test_on_offline",
+	"Link_Test_on_offline"
+};
+
+#define QLCNIC_TEST_LEN	ARRAY_SIZE(qlcnic_gstrings_test)
+
+#define QLCNIC_RING_REGS_COUNT	20
+#define QLCNIC_RING_REGS_LEN	(QLCNIC_RING_REGS_COUNT * sizeof(u32))
+#define QLCNIC_MAX_EEPROM_LEN   1024
+
+static const u32 diag_registers[] = {
+	CRB_CMDPEG_STATE,
+	CRB_RCVPEG_STATE,
+	CRB_XG_STATE_P3,
+	CRB_FW_CAPABILITIES_1,
+	ISR_INT_STATE_REG,
+	QLCNIC_CRB_DEV_REF_COUNT,
+	QLCNIC_CRB_DEV_STATE,
+	QLCNIC_CRB_DRV_STATE,
+	QLCNIC_CRB_DRV_SCRATCH,
+	QLCNIC_CRB_DEV_PARTITION_INFO,
+	QLCNIC_CRB_DRV_IDC_VER,
+	QLCNIC_PEG_ALIVE_COUNTER,
+	QLCNIC_PEG_HALT_STATUS1,
+	QLCNIC_PEG_HALT_STATUS2,
+	QLCNIC_CRB_PEG_NET_0+0x3c,
+	QLCNIC_CRB_PEG_NET_1+0x3c,
+	QLCNIC_CRB_PEG_NET_2+0x3c,
+	QLCNIC_CRB_PEG_NET_4+0x3c,
+	-1
+};
+
+static int qlcnic_get_regs_len(struct net_device *dev)
+{
+	return sizeof(diag_registers) + QLCNIC_RING_REGS_LEN;
+}
+
+static int qlcnic_get_eeprom_len(struct net_device *dev)
+{
+	return QLCNIC_FLASH_TOTAL_SIZE;
+}
+
+static void
+qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	u32 fw_major, fw_minor, fw_build;
+
+	fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR);
+	fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR);
+	fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB);
+	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
+
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+	strlcpy(drvinfo->driver, qlcnic_driver_name, 32);
+	strlcpy(drvinfo->version, QLCNIC_LINUX_VERSIONID, 32);
+}
+
+static int
+qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	int check_sfp_module = 0;
+	u16 pcifn = adapter->ahw.pci_func;
+
+	/* read which mode */
+	if (adapter->ahw.port_type == QLCNIC_GBE) {
+		ecmd->supported = (SUPPORTED_10baseT_Half |
+				   SUPPORTED_10baseT_Full |
+				   SUPPORTED_100baseT_Half |
+				   SUPPORTED_100baseT_Full |
+				   SUPPORTED_1000baseT_Half |
+				   SUPPORTED_1000baseT_Full);
+
+		ecmd->advertising = (ADVERTISED_100baseT_Half |
+				     ADVERTISED_100baseT_Full |
+				     ADVERTISED_1000baseT_Half |
+				     ADVERTISED_1000baseT_Full);
+
+		ecmd->speed = adapter->link_speed;
+		ecmd->duplex = adapter->link_duplex;
+		ecmd->autoneg = adapter->link_autoneg;
+
+	} else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+		u32 val;
+
+		val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
+		if (val == QLCNIC_PORT_MODE_802_3_AP) {
+			ecmd->supported = SUPPORTED_1000baseT_Full;
+			ecmd->advertising = ADVERTISED_1000baseT_Full;
+		} else {
+			ecmd->supported = SUPPORTED_10000baseT_Full;
+			ecmd->advertising = ADVERTISED_10000baseT_Full;
+		}
+
+		if (netif_running(dev) && adapter->has_link_events) {
+			ecmd->speed = adapter->link_speed;
+			ecmd->autoneg = adapter->link_autoneg;
+			ecmd->duplex = adapter->link_duplex;
+			goto skip;
+		}
+
+		val = QLCRD32(adapter, P3_LINK_SPEED_REG(pcifn));
+		ecmd->speed = P3_LINK_SPEED_MHZ *
+			P3_LINK_SPEED_VAL(pcifn, val);
+		ecmd->duplex = DUPLEX_FULL;
+		ecmd->autoneg = AUTONEG_DISABLE;
+	} else
+		return -EIO;
+
+skip:
+	ecmd->phy_address = adapter->physical_port;
+	ecmd->transceiver = XCVR_EXTERNAL;
+
+	switch (adapter->ahw.board_type) {
+	case QLCNIC_BRDTYPE_P3_REF_QG:
+	case QLCNIC_BRDTYPE_P3_4_GB:
+	case QLCNIC_BRDTYPE_P3_4_GB_MM:
+
+		ecmd->supported |= SUPPORTED_Autoneg;
+		ecmd->advertising |= ADVERTISED_Autoneg;
+	case QLCNIC_BRDTYPE_P3_10G_CX4:
+	case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
+	case QLCNIC_BRDTYPE_P3_10000_BASE_T:
+		ecmd->supported |= SUPPORTED_TP;
+		ecmd->advertising |= ADVERTISED_TP;
+		ecmd->port = PORT_TP;
+		ecmd->autoneg =  adapter->link_autoneg;
+		break;
+	case QLCNIC_BRDTYPE_P3_IMEZ:
+	case QLCNIC_BRDTYPE_P3_XG_LOM:
+	case QLCNIC_BRDTYPE_P3_HMEZ:
+		ecmd->supported |= SUPPORTED_MII;
+		ecmd->advertising |= ADVERTISED_MII;
+		ecmd->port = PORT_MII;
+		ecmd->autoneg = AUTONEG_DISABLE;
+		break;
+	case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
+	case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
+	case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
+		ecmd->advertising |= ADVERTISED_TP;
+		ecmd->supported |= SUPPORTED_TP;
+		check_sfp_module = netif_running(dev) &&
+			adapter->has_link_events;
+	case QLCNIC_BRDTYPE_P3_10G_XFP:
+		ecmd->supported |= SUPPORTED_FIBRE;
+		ecmd->advertising |= ADVERTISED_FIBRE;
+		ecmd->port = PORT_FIBRE;
+		ecmd->autoneg = AUTONEG_DISABLE;
+		break;
+	case QLCNIC_BRDTYPE_P3_10G_TP:
+		if (adapter->ahw.port_type == QLCNIC_XGBE) {
+			ecmd->autoneg = AUTONEG_DISABLE;
+			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+			ecmd->advertising |=
+				(ADVERTISED_FIBRE | ADVERTISED_TP);
+			ecmd->port = PORT_FIBRE;
+			check_sfp_module = netif_running(dev) &&
+				adapter->has_link_events;
+		} else {
+			ecmd->autoneg = AUTONEG_ENABLE;
+			ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
+			ecmd->advertising |=
+				(ADVERTISED_TP | ADVERTISED_Autoneg);
+			ecmd->port = PORT_TP;
+		}
+		break;
+	default:
+		dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
+			adapter->ahw.board_type);
+		return -EIO;
+	}
+
+	if (check_sfp_module) {
+		switch (adapter->module_type) {
+		case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
+		case LINKEVENT_MODULE_OPTICAL_SRLR:
+		case LINKEVENT_MODULE_OPTICAL_LRM:
+		case LINKEVENT_MODULE_OPTICAL_SFP_1G:
+			ecmd->port = PORT_FIBRE;
+			break;
+		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
+		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
+		case LINKEVENT_MODULE_TWINAX:
+			ecmd->port = PORT_TP;
+			break;
+		default:
+			ecmd->port = PORT_OTHER;
+		}
+	}
+
+	return 0;
+}
+
+static int
+qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	__u32 status;
+
+	/* read which mode */
+	if (adapter->ahw.port_type == QLCNIC_GBE) {
+		/* autonegotiation */
+		if (qlcnic_fw_cmd_set_phy(adapter,
+			       QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG,
+			       ecmd->autoneg) != 0)
+			return -EIO;
+		else
+			adapter->link_autoneg = ecmd->autoneg;
+
+		if (qlcnic_fw_cmd_query_phy(adapter,
+			      QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+			      &status) != 0)
+			return -EIO;
+
+		switch (ecmd->speed) {
+		case SPEED_10:
+			qlcnic_set_phy_speed(status, 0);
+			break;
+		case SPEED_100:
+			qlcnic_set_phy_speed(status, 1);
+			break;
+		case SPEED_1000:
+			qlcnic_set_phy_speed(status, 2);
+			break;
+		}
+
+		if (ecmd->duplex == DUPLEX_HALF)
+			qlcnic_clear_phy_duplex(status);
+		if (ecmd->duplex == DUPLEX_FULL)
+			qlcnic_set_phy_duplex(status);
+		if (qlcnic_fw_cmd_set_phy(adapter,
+			       QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+			       *((int *)&status)) != 0)
+			return -EIO;
+		else {
+			adapter->link_speed = ecmd->speed;
+			adapter->link_duplex = ecmd->duplex;
+		}
+	} else
+		return -EOPNOTSUPP;
+
+	if (!netif_running(dev))
+		return 0;
+
+	dev->netdev_ops->ndo_stop(dev);
+	return dev->netdev_ops->ndo_open(dev);
+}
+
+static void
+qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_host_sds_ring *sds_ring;
+	u32 *regs_buff = p;
+	int ring, i = 0;
+
+	memset(p, 0, qlcnic_get_regs_len(dev));
+	regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
+	    (adapter->pdev)->device;
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return;
+
+	for (i = 0; diag_registers[i] != -1; i++)
+		regs_buff[i] = QLCRD32(adapter, diag_registers[i]);
+
+	regs_buff[i++] = 0xFFEFCDAB; /* Marker btw regs and ring count*/
+
+	regs_buff[i++] = 1; /* No. of tx ring */
+	regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer));
+	regs_buff[i++] = readl(adapter->tx_ring->crb_cmd_producer);
+
+	regs_buff[i++] = 2; /* No. of rx ring */
+	regs_buff[i++] = readl(recv_ctx->rds_rings[0].crb_rcv_producer);
+	regs_buff[i++] = readl(recv_ctx->rds_rings[1].crb_rcv_producer);
+
+	regs_buff[i++] = adapter->max_sds_rings;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &(recv_ctx->sds_rings[ring]);
+		regs_buff[i++] = readl(sds_ring->crb_sts_consumer);
+	}
+}
+
+static u32 qlcnic_test_link(struct net_device *dev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	u32 val;
+
+	val = QLCRD32(adapter, CRB_XG_STATE_P3);
+	val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+	return (val == XG_LINK_UP_P3) ? 0 : 1;
+}
+
+static int
+qlcnic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+		      u8 *bytes)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	int offset;
+	int ret;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = (adapter->pdev)->vendor |
+			((adapter->pdev)->device << 16);
+	offset = eeprom->offset;
+
+	ret = qlcnic_rom_fast_read_words(adapter, offset, bytes,
+						eeprom->len);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void
+qlcnic_get_ringparam(struct net_device *dev,
+		struct ethtool_ringparam *ring)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+
+	ring->rx_pending = adapter->num_rxd;
+	ring->rx_jumbo_pending = adapter->num_jumbo_rxd;
+	ring->rx_jumbo_pending += adapter->num_lro_rxd;
+	ring->tx_pending = adapter->num_txd;
+
+	if (adapter->ahw.port_type == QLCNIC_GBE) {
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
+		ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+	} else {
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
+		ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+	}
+
+	ring->tx_max_pending = MAX_CMD_DESCRIPTORS;
+
+	ring->rx_mini_max_pending = 0;
+	ring->rx_mini_pending = 0;
+}
+
+static u32
+qlcnic_validate_ringparam(u32 val, u32 min, u32 max, char *r_name)
+{
+	u32 num_desc;
+	num_desc = max(val, min);
+	num_desc = min(num_desc, max);
+	num_desc = roundup_pow_of_two(num_desc);
+
+	if (val != num_desc) {
+		printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n",
+		       qlcnic_driver_name, r_name, num_desc, val);
+	}
+
+	return num_desc;
+}
+
+static int
+qlcnic_set_ringparam(struct net_device *dev,
+		struct ethtool_ringparam *ring)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	u16 max_rcv_desc = MAX_RCV_DESCRIPTORS_10G;
+	u16 max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+	u16 num_rxd, num_jumbo_rxd, num_txd;
+
+
+	if (ring->rx_mini_pending)
+		return -EOPNOTSUPP;
+
+	if (adapter->ahw.port_type == QLCNIC_GBE) {
+		max_rcv_desc = MAX_RCV_DESCRIPTORS_1G;
+		max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+	}
+
+	num_rxd = qlcnic_validate_ringparam(ring->rx_pending,
+			MIN_RCV_DESCRIPTORS, max_rcv_desc, "rx");
+
+	num_jumbo_rxd = qlcnic_validate_ringparam(ring->rx_jumbo_pending,
+			MIN_JUMBO_DESCRIPTORS, max_jumbo_desc, "rx jumbo");
+
+	num_txd = qlcnic_validate_ringparam(ring->tx_pending,
+			MIN_CMD_DESCRIPTORS, MAX_CMD_DESCRIPTORS, "tx");
+
+	if (num_rxd == adapter->num_rxd && num_txd == adapter->num_txd &&
+			num_jumbo_rxd == adapter->num_jumbo_rxd)
+		return 0;
+
+	adapter->num_rxd = num_rxd;
+	adapter->num_jumbo_rxd = num_jumbo_rxd;
+	adapter->num_txd = num_txd;
+
+	return qlcnic_reset_context(adapter);
+}
+
+static void
+qlcnic_get_pauseparam(struct net_device *netdev,
+			  struct ethtool_pauseparam *pause)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int port = adapter->physical_port;
+	__u32 val;
+
+	if (adapter->ahw.port_type == QLCNIC_GBE) {
+		if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
+			return;
+		/* get flow control settings */
+		val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port));
+		pause->rx_pause = qlcnic_gb_get_rx_flowctl(val);
+		val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL);
+		switch (port) {
+		case 0:
+			pause->tx_pause = !(qlcnic_gb_get_gb0_mask(val));
+			break;
+		case 1:
+			pause->tx_pause = !(qlcnic_gb_get_gb1_mask(val));
+			break;
+		case 2:
+			pause->tx_pause = !(qlcnic_gb_get_gb2_mask(val));
+			break;
+		case 3:
+		default:
+			pause->tx_pause = !(qlcnic_gb_get_gb3_mask(val));
+			break;
+		}
+	} else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+		if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
+			return;
+		pause->rx_pause = 1;
+		val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL);
+		if (port == 0)
+			pause->tx_pause = !(qlcnic_xg_get_xg0_mask(val));
+		else
+			pause->tx_pause = !(qlcnic_xg_get_xg1_mask(val));
+	} else {
+		dev_err(&netdev->dev, "Unknown board type: %x\n",
+					adapter->ahw.port_type);
+	}
+}
+
+static int
+qlcnic_set_pauseparam(struct net_device *netdev,
+			  struct ethtool_pauseparam *pause)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int port = adapter->physical_port;
+	__u32 val;
+
+	/* read mode */
+	if (adapter->ahw.port_type == QLCNIC_GBE) {
+		if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
+			return -EIO;
+		/* set flow control */
+		val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port));
+
+		if (pause->rx_pause)
+			qlcnic_gb_rx_flowctl(val);
+		else
+			qlcnic_gb_unset_rx_flowctl(val);
+
+		QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port),
+				val);
+		/* set autoneg */
+		val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL);
+		switch (port) {
+		case 0:
+			if (pause->tx_pause)
+				qlcnic_gb_unset_gb0_mask(val);
+			else
+				qlcnic_gb_set_gb0_mask(val);
+			break;
+		case 1:
+			if (pause->tx_pause)
+				qlcnic_gb_unset_gb1_mask(val);
+			else
+				qlcnic_gb_set_gb1_mask(val);
+			break;
+		case 2:
+			if (pause->tx_pause)
+				qlcnic_gb_unset_gb2_mask(val);
+			else
+				qlcnic_gb_set_gb2_mask(val);
+			break;
+		case 3:
+		default:
+			if (pause->tx_pause)
+				qlcnic_gb_unset_gb3_mask(val);
+			else
+				qlcnic_gb_set_gb3_mask(val);
+			break;
+		}
+		QLCWR32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, val);
+	} else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+		if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
+			return -EIO;
+		val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL);
+		if (port == 0) {
+			if (pause->tx_pause)
+				qlcnic_xg_unset_xg0_mask(val);
+			else
+				qlcnic_xg_set_xg0_mask(val);
+		} else {
+			if (pause->tx_pause)
+				qlcnic_xg_unset_xg1_mask(val);
+			else
+				qlcnic_xg_set_xg1_mask(val);
+		}
+		QLCWR32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, val);
+	} else {
+		dev_err(&netdev->dev, "Unknown board type: %x\n",
+				adapter->ahw.port_type);
+	}
+	return 0;
+}
+
+static int qlcnic_reg_test(struct net_device *dev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	u32 data_read, data_written;
+
+	data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0));
+	if ((data_read & 0xffff) != adapter->pdev->vendor)
+		return 1;
+
+	data_written = (u32)0xa5a5a5a5;
+
+	QLCWR32(adapter, CRB_SCRATCHPAD_TEST, data_written);
+	data_read = QLCRD32(adapter, CRB_SCRATCHPAD_TEST);
+	if (data_written != data_read)
+		return 1;
+
+	return 0;
+}
+
+static int qlcnic_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		return QLCNIC_TEST_LEN;
+	case ETH_SS_STATS:
+		return QLCNIC_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void
+qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
+		     u64 *data)
+{
+	memset(data, 0, sizeof(u64) * QLCNIC_TEST_LEN);
+	data[0] = qlcnic_reg_test(dev);
+	if (data[0])
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+
+	/* link test */
+	data[1] = (u64) qlcnic_test_link(dev);
+	if (data[1])
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+}
+
+static void
+qlcnic_get_strings(struct net_device *dev, u32 stringset, u8 * data)
+{
+	int index;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, *qlcnic_gstrings_test,
+		       QLCNIC_TEST_LEN * ETH_GSTRING_LEN);
+		break;
+	case ETH_SS_STATS:
+		for (index = 0; index < QLCNIC_STATS_LEN; index++) {
+			memcpy(data + index * ETH_GSTRING_LEN,
+			       qlcnic_gstrings_stats[index].stat_string,
+			       ETH_GSTRING_LEN);
+		}
+		break;
+	}
+}
+
+static void
+qlcnic_get_ethtool_stats(struct net_device *dev,
+			     struct ethtool_stats *stats, u64 * data)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	int index;
+
+	for (index = 0; index < QLCNIC_STATS_LEN; index++) {
+		char *p =
+		    (char *)adapter +
+		    qlcnic_gstrings_stats[index].stat_offset;
+		data[index] =
+		    (qlcnic_gstrings_stats[index].sizeof_stat ==
+		     sizeof(u64)) ? *(u64 *)p:(*(u32 *)p);
+	}
+}
+
+static u32 qlcnic_get_rx_csum(struct net_device *dev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	return adapter->rx_csum;
+}
+
+static int qlcnic_set_rx_csum(struct net_device *dev, u32 data)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	adapter->rx_csum = !!data;
+	return 0;
+}
+
+static u32 qlcnic_get_tso(struct net_device *dev)
+{
+	return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
+}
+
+static int qlcnic_set_tso(struct net_device *dev, u32 data)
+{
+	if (data)
+		dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
+	else
+		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+	return 0;
+}
+
+static void
+qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	u32 wol_cfg;
+
+	wol->supported = 0;
+	wol->wolopts = 0;
+
+	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
+	if (wol_cfg & (1UL << adapter->portnum))
+		wol->supported |= WAKE_MAGIC;
+
+	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
+	if (wol_cfg & (1UL << adapter->portnum))
+		wol->wolopts |= WAKE_MAGIC;
+}
+
+static int
+qlcnic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	u32 wol_cfg;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EOPNOTSUPP;
+
+	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
+	if (!(wol_cfg & (1 << adapter->portnum)))
+		return -EOPNOTSUPP;
+
+	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
+	if (wol->wolopts & WAKE_MAGIC)
+		wol_cfg |= 1UL << adapter->portnum;
+	else
+		wol_cfg &= ~(1UL << adapter->portnum);
+
+	QLCWR32(adapter, QLCNIC_WOL_CONFIG, wol_cfg);
+
+	return 0;
+}
+
+/*
+ * Set the coalescing parameters. Currently only normal is supported.
+ * If rx_coalesce_usecs == 0 or rx_max_coalesced_frames == 0 then set the
+ * firmware coalescing to default.
+ */
+static int qlcnic_set_intr_coalesce(struct net_device *netdev,
+			struct ethtool_coalesce *ethcoal)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return -EINVAL;
+
+	/*
+	* Return Error if unsupported values or
+	* unsupported parameters are set.
+	*/
+	if (ethcoal->rx_coalesce_usecs > 0xffff ||
+		ethcoal->rx_max_coalesced_frames > 0xffff ||
+		ethcoal->tx_coalesce_usecs > 0xffff ||
+		ethcoal->tx_max_coalesced_frames > 0xffff ||
+		ethcoal->rx_coalesce_usecs_irq ||
+		ethcoal->rx_max_coalesced_frames_irq ||
+		ethcoal->tx_coalesce_usecs_irq ||
+		ethcoal->tx_max_coalesced_frames_irq ||
+		ethcoal->stats_block_coalesce_usecs ||
+		ethcoal->use_adaptive_rx_coalesce ||
+		ethcoal->use_adaptive_tx_coalesce ||
+		ethcoal->pkt_rate_low ||
+		ethcoal->rx_coalesce_usecs_low ||
+		ethcoal->rx_max_coalesced_frames_low ||
+		ethcoal->tx_coalesce_usecs_low ||
+		ethcoal->tx_max_coalesced_frames_low ||
+		ethcoal->pkt_rate_high ||
+		ethcoal->rx_coalesce_usecs_high ||
+		ethcoal->rx_max_coalesced_frames_high ||
+		ethcoal->tx_coalesce_usecs_high ||
+		ethcoal->tx_max_coalesced_frames_high)
+		return -EINVAL;
+
+	if (!ethcoal->rx_coalesce_usecs ||
+		!ethcoal->rx_max_coalesced_frames) {
+		adapter->coal.flags = QLCNIC_INTR_DEFAULT;
+		adapter->coal.normal.data.rx_time_us =
+			QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
+		adapter->coal.normal.data.rx_packets =
+			QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
+	} else {
+		adapter->coal.flags = 0;
+		adapter->coal.normal.data.rx_time_us =
+		ethcoal->rx_coalesce_usecs;
+		adapter->coal.normal.data.rx_packets =
+		ethcoal->rx_max_coalesced_frames;
+	}
+	adapter->coal.normal.data.tx_time_us = ethcoal->tx_coalesce_usecs;
+	adapter->coal.normal.data.tx_packets =
+	ethcoal->tx_max_coalesced_frames;
+
+	qlcnic_config_intr_coalesce(adapter);
+
+	return 0;
+}
+
+static int qlcnic_get_intr_coalesce(struct net_device *netdev,
+			struct ethtool_coalesce *ethcoal)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return -EINVAL;
+
+	ethcoal->rx_coalesce_usecs = adapter->coal.normal.data.rx_time_us;
+	ethcoal->tx_coalesce_usecs = adapter->coal.normal.data.tx_time_us;
+	ethcoal->rx_max_coalesced_frames =
+		adapter->coal.normal.data.rx_packets;
+	ethcoal->tx_max_coalesced_frames =
+		adapter->coal.normal.data.tx_packets;
+
+	return 0;
+}
+
+static int qlcnic_set_flags(struct net_device *netdev, u32 data)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int hw_lro;
+
+	if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO))
+		return -EINVAL;
+
+	ethtool_op_set_flags(netdev, data);
+
+	hw_lro = (data & ETH_FLAG_LRO) ? QLCNIC_LRO_ENABLED : 0;
+
+	if (qlcnic_config_hw_lro(adapter, hw_lro))
+		return -EIO;
+
+	if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
+		return -EIO;
+
+
+	return 0;
+}
+
+const struct ethtool_ops qlcnic_ethtool_ops = {
+	.get_settings = qlcnic_get_settings,
+	.set_settings = qlcnic_set_settings,
+	.get_drvinfo = qlcnic_get_drvinfo,
+	.get_regs_len = qlcnic_get_regs_len,
+	.get_regs = qlcnic_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_eeprom_len = qlcnic_get_eeprom_len,
+	.get_eeprom = qlcnic_get_eeprom,
+	.get_ringparam = qlcnic_get_ringparam,
+	.set_ringparam = qlcnic_set_ringparam,
+	.get_pauseparam = qlcnic_get_pauseparam,
+	.set_pauseparam = qlcnic_set_pauseparam,
+	.set_tx_csum = ethtool_op_set_tx_csum,
+	.set_sg = ethtool_op_set_sg,
+	.get_tso = qlcnic_get_tso,
+	.set_tso = qlcnic_set_tso,
+	.get_wol = qlcnic_get_wol,
+	.set_wol = qlcnic_set_wol,
+	.self_test = qlcnic_diag_test,
+	.get_strings = qlcnic_get_strings,
+	.get_ethtool_stats = qlcnic_get_ethtool_stats,
+	.get_sset_count = qlcnic_get_sset_count,
+	.get_rx_csum = qlcnic_get_rx_csum,
+	.set_rx_csum = qlcnic_set_rx_csum,
+	.get_coalesce = qlcnic_get_intr_coalesce,
+	.set_coalesce = qlcnic_set_intr_coalesce,
+	.get_flags = ethtool_op_get_flags,
+	.set_flags = qlcnic_set_flags,
+};
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/qlcnic/qlcnic_hdr.h
new file mode 100644
index 000000000000..0469f84360a4
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic_hdr.h
@@ -0,0 +1,937 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#ifndef __QLCNIC_HDR_H_
+#define __QLCNIC_HDR_H_
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+/*
+ * The basic unit of access when reading/writing control registers.
+ */
+
+enum {
+	QLCNIC_HW_H0_CH_HUB_ADR = 0x05,
+	QLCNIC_HW_H1_CH_HUB_ADR = 0x0E,
+	QLCNIC_HW_H2_CH_HUB_ADR = 0x03,
+	QLCNIC_HW_H3_CH_HUB_ADR = 0x01,
+	QLCNIC_HW_H4_CH_HUB_ADR = 0x06,
+	QLCNIC_HW_H5_CH_HUB_ADR = 0x07,
+	QLCNIC_HW_H6_CH_HUB_ADR = 0x08
+};
+
+/*  Hub 0 */
+enum {
+	QLCNIC_HW_MN_CRB_AGT_ADR = 0x15,
+	QLCNIC_HW_MS_CRB_AGT_ADR = 0x25
+};
+
+/*  Hub 1 */
+enum {
+	QLCNIC_HW_PS_CRB_AGT_ADR = 0x73,
+	QLCNIC_HW_SS_CRB_AGT_ADR = 0x20,
+	QLCNIC_HW_RPMX3_CRB_AGT_ADR = 0x0b,
+	QLCNIC_HW_QMS_CRB_AGT_ADR = 0x00,
+	QLCNIC_HW_SQGS0_CRB_AGT_ADR = 0x01,
+	QLCNIC_HW_SQGS1_CRB_AGT_ADR = 0x02,
+	QLCNIC_HW_SQGS2_CRB_AGT_ADR = 0x03,
+	QLCNIC_HW_SQGS3_CRB_AGT_ADR = 0x04,
+	QLCNIC_HW_C2C0_CRB_AGT_ADR = 0x58,
+	QLCNIC_HW_C2C1_CRB_AGT_ADR = 0x59,
+	QLCNIC_HW_C2C2_CRB_AGT_ADR = 0x5a,
+	QLCNIC_HW_RPMX2_CRB_AGT_ADR = 0x0a,
+	QLCNIC_HW_RPMX4_CRB_AGT_ADR = 0x0c,
+	QLCNIC_HW_RPMX7_CRB_AGT_ADR = 0x0f,
+	QLCNIC_HW_RPMX9_CRB_AGT_ADR = 0x12,
+	QLCNIC_HW_SMB_CRB_AGT_ADR = 0x18
+};
+
+/*  Hub 2 */
+enum {
+	QLCNIC_HW_NIU_CRB_AGT_ADR = 0x31,
+	QLCNIC_HW_I2C0_CRB_AGT_ADR = 0x19,
+	QLCNIC_HW_I2C1_CRB_AGT_ADR = 0x29,
+
+	QLCNIC_HW_SN_CRB_AGT_ADR = 0x10,
+	QLCNIC_HW_I2Q_CRB_AGT_ADR = 0x20,
+	QLCNIC_HW_LPC_CRB_AGT_ADR = 0x22,
+	QLCNIC_HW_ROMUSB_CRB_AGT_ADR = 0x21,
+	QLCNIC_HW_QM_CRB_AGT_ADR = 0x66,
+	QLCNIC_HW_SQG0_CRB_AGT_ADR = 0x60,
+	QLCNIC_HW_SQG1_CRB_AGT_ADR = 0x61,
+	QLCNIC_HW_SQG2_CRB_AGT_ADR = 0x62,
+	QLCNIC_HW_SQG3_CRB_AGT_ADR = 0x63,
+	QLCNIC_HW_RPMX1_CRB_AGT_ADR = 0x09,
+	QLCNIC_HW_RPMX5_CRB_AGT_ADR = 0x0d,
+	QLCNIC_HW_RPMX6_CRB_AGT_ADR = 0x0e,
+	QLCNIC_HW_RPMX8_CRB_AGT_ADR = 0x11
+};
+
+/*  Hub 3 */
+enum {
+	QLCNIC_HW_PH_CRB_AGT_ADR = 0x1A,
+	QLCNIC_HW_SRE_CRB_AGT_ADR = 0x50,
+	QLCNIC_HW_EG_CRB_AGT_ADR = 0x51,
+	QLCNIC_HW_RPMX0_CRB_AGT_ADR = 0x08
+};
+
+/*  Hub 4 */
+enum {
+	QLCNIC_HW_PEGN0_CRB_AGT_ADR = 0x40,
+	QLCNIC_HW_PEGN1_CRB_AGT_ADR,
+	QLCNIC_HW_PEGN2_CRB_AGT_ADR,
+	QLCNIC_HW_PEGN3_CRB_AGT_ADR,
+	QLCNIC_HW_PEGNI_CRB_AGT_ADR,
+	QLCNIC_HW_PEGND_CRB_AGT_ADR,
+	QLCNIC_HW_PEGNC_CRB_AGT_ADR,
+	QLCNIC_HW_PEGR0_CRB_AGT_ADR,
+	QLCNIC_HW_PEGR1_CRB_AGT_ADR,
+	QLCNIC_HW_PEGR2_CRB_AGT_ADR,
+	QLCNIC_HW_PEGR3_CRB_AGT_ADR,
+	QLCNIC_HW_PEGN4_CRB_AGT_ADR
+};
+
+/*  Hub 5 */
+enum {
+	QLCNIC_HW_PEGS0_CRB_AGT_ADR = 0x40,
+	QLCNIC_HW_PEGS1_CRB_AGT_ADR,
+	QLCNIC_HW_PEGS2_CRB_AGT_ADR,
+	QLCNIC_HW_PEGS3_CRB_AGT_ADR,
+	QLCNIC_HW_PEGSI_CRB_AGT_ADR,
+	QLCNIC_HW_PEGSD_CRB_AGT_ADR,
+	QLCNIC_HW_PEGSC_CRB_AGT_ADR
+};
+
+/*  Hub 6 */
+enum {
+	QLCNIC_HW_CAS0_CRB_AGT_ADR = 0x46,
+	QLCNIC_HW_CAS1_CRB_AGT_ADR = 0x47,
+	QLCNIC_HW_CAS2_CRB_AGT_ADR = 0x48,
+	QLCNIC_HW_CAS3_CRB_AGT_ADR = 0x49,
+	QLCNIC_HW_NCM_CRB_AGT_ADR = 0x16,
+	QLCNIC_HW_TMR_CRB_AGT_ADR = 0x17,
+	QLCNIC_HW_XDMA_CRB_AGT_ADR = 0x05,
+	QLCNIC_HW_OCM0_CRB_AGT_ADR = 0x06,
+	QLCNIC_HW_OCM1_CRB_AGT_ADR = 0x07
+};
+
+/*  Floaters - non existent modules */
+#define QLCNIC_HW_EFC_RPMX0_CRB_AGT_ADR	0x67
+
+/*  This field defines PCI/X adr [25:20] of agents on the CRB */
+enum {
+	QLCNIC_HW_PX_MAP_CRB_PH = 0,
+	QLCNIC_HW_PX_MAP_CRB_PS,
+	QLCNIC_HW_PX_MAP_CRB_MN,
+	QLCNIC_HW_PX_MAP_CRB_MS,
+	QLCNIC_HW_PX_MAP_CRB_PGR1,
+	QLCNIC_HW_PX_MAP_CRB_SRE,
+	QLCNIC_HW_PX_MAP_CRB_NIU,
+	QLCNIC_HW_PX_MAP_CRB_QMN,
+	QLCNIC_HW_PX_MAP_CRB_SQN0,
+	QLCNIC_HW_PX_MAP_CRB_SQN1,
+	QLCNIC_HW_PX_MAP_CRB_SQN2,
+	QLCNIC_HW_PX_MAP_CRB_SQN3,
+	QLCNIC_HW_PX_MAP_CRB_QMS,
+	QLCNIC_HW_PX_MAP_CRB_SQS0,
+	QLCNIC_HW_PX_MAP_CRB_SQS1,
+	QLCNIC_HW_PX_MAP_CRB_SQS2,
+	QLCNIC_HW_PX_MAP_CRB_SQS3,
+	QLCNIC_HW_PX_MAP_CRB_PGN0,
+	QLCNIC_HW_PX_MAP_CRB_PGN1,
+	QLCNIC_HW_PX_MAP_CRB_PGN2,
+	QLCNIC_HW_PX_MAP_CRB_PGN3,
+	QLCNIC_HW_PX_MAP_CRB_PGND,
+	QLCNIC_HW_PX_MAP_CRB_PGNI,
+	QLCNIC_HW_PX_MAP_CRB_PGS0,
+	QLCNIC_HW_PX_MAP_CRB_PGS1,
+	QLCNIC_HW_PX_MAP_CRB_PGS2,
+	QLCNIC_HW_PX_MAP_CRB_PGS3,
+	QLCNIC_HW_PX_MAP_CRB_PGSD,
+	QLCNIC_HW_PX_MAP_CRB_PGSI,
+	QLCNIC_HW_PX_MAP_CRB_SN,
+	QLCNIC_HW_PX_MAP_CRB_PGR2,
+	QLCNIC_HW_PX_MAP_CRB_EG,
+	QLCNIC_HW_PX_MAP_CRB_PH2,
+	QLCNIC_HW_PX_MAP_CRB_PS2,
+	QLCNIC_HW_PX_MAP_CRB_CAM,
+	QLCNIC_HW_PX_MAP_CRB_CAS0,
+	QLCNIC_HW_PX_MAP_CRB_CAS1,
+	QLCNIC_HW_PX_MAP_CRB_CAS2,
+	QLCNIC_HW_PX_MAP_CRB_C2C0,
+	QLCNIC_HW_PX_MAP_CRB_C2C1,
+	QLCNIC_HW_PX_MAP_CRB_TIMR,
+	QLCNIC_HW_PX_MAP_CRB_PGR3,
+	QLCNIC_HW_PX_MAP_CRB_RPMX1,
+	QLCNIC_HW_PX_MAP_CRB_RPMX2,
+	QLCNIC_HW_PX_MAP_CRB_RPMX3,
+	QLCNIC_HW_PX_MAP_CRB_RPMX4,
+	QLCNIC_HW_PX_MAP_CRB_RPMX5,
+	QLCNIC_HW_PX_MAP_CRB_RPMX6,
+	QLCNIC_HW_PX_MAP_CRB_RPMX7,
+	QLCNIC_HW_PX_MAP_CRB_XDMA,
+	QLCNIC_HW_PX_MAP_CRB_I2Q,
+	QLCNIC_HW_PX_MAP_CRB_ROMUSB,
+	QLCNIC_HW_PX_MAP_CRB_CAS3,
+	QLCNIC_HW_PX_MAP_CRB_RPMX0,
+	QLCNIC_HW_PX_MAP_CRB_RPMX8,
+	QLCNIC_HW_PX_MAP_CRB_RPMX9,
+	QLCNIC_HW_PX_MAP_CRB_OCM0,
+	QLCNIC_HW_PX_MAP_CRB_OCM1,
+	QLCNIC_HW_PX_MAP_CRB_SMB,
+	QLCNIC_HW_PX_MAP_CRB_I2C0,
+	QLCNIC_HW_PX_MAP_CRB_I2C1,
+	QLCNIC_HW_PX_MAP_CRB_LPC,
+	QLCNIC_HW_PX_MAP_CRB_PGNC,
+	QLCNIC_HW_PX_MAP_CRB_PGR0
+};
+
+/*  This field defines CRB adr [31:20] of the agents */
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_MN	\
+	((QLCNIC_HW_H0_CH_HUB_ADR << 7) | QLCNIC_HW_MN_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PH	\
+	((QLCNIC_HW_H0_CH_HUB_ADR << 7) | QLCNIC_HW_PH_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_MS	\
+	((QLCNIC_HW_H0_CH_HUB_ADR << 7) | QLCNIC_HW_MS_CRB_AGT_ADR)
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PS	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_PS_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SS	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_SS_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX3	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX3_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_QMS	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_QMS_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQS0	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_SQGS0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQS1	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_SQGS1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQS2	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_SQGS2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQS3	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_SQGS3_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_C2C0	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_C2C0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_C2C1	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_C2C1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX2	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX4	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX4_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX7	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX7_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX9	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX9_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SMB	\
+	((QLCNIC_HW_H1_CH_HUB_ADR << 7) | QLCNIC_HW_SMB_CRB_AGT_ADR)
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_NIU	\
+	((QLCNIC_HW_H2_CH_HUB_ADR << 7) | QLCNIC_HW_NIU_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_I2C0	\
+	((QLCNIC_HW_H2_CH_HUB_ADR << 7) | QLCNIC_HW_I2C0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_I2C1	\
+	((QLCNIC_HW_H2_CH_HUB_ADR << 7) | QLCNIC_HW_I2C1_CRB_AGT_ADR)
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SRE	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_SRE_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_EG	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_EG_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX0	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_QMN	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_QM_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQN0	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_SQG0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQN1	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_SQG1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQN2	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_SQG2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SQN3	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_SQG3_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX1	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX5	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX5_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX6	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX6_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX8	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_RPMX8_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_CAS0	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_CAS0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_CAS1	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_CAS1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_CAS2	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_CAS2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_CAS3	\
+	((QLCNIC_HW_H3_CH_HUB_ADR << 7) | QLCNIC_HW_CAS3_CRB_AGT_ADR)
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGNI	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGNI_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGND	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGND_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGN0	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGN0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGN1	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGN1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGN2	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGN2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGN3	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGN3_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGN4	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGN4_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGNC	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGNC_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGR0	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGR0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGR1	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGR1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGR2	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGR2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGR3	\
+	((QLCNIC_HW_H4_CH_HUB_ADR << 7) | QLCNIC_HW_PEGR3_CRB_AGT_ADR)
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGSI	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGSI_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGSD	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGSD_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGS0	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGS0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGS1	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGS1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGS2	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGS2_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGS3	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGS3_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_PGSC	\
+	((QLCNIC_HW_H5_CH_HUB_ADR << 7) | QLCNIC_HW_PEGSC_CRB_AGT_ADR)
+
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_CAM	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_NCM_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_TIMR	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_TMR_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_XDMA	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_XDMA_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_SN	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_SN_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_I2Q	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_I2Q_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_ROMUSB	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_ROMUSB_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_OCM0	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_OCM0_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_OCM1	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_OCM1_CRB_AGT_ADR)
+#define QLCNIC_HW_CRB_HUB_AGT_ADR_LPC	\
+	((QLCNIC_HW_H6_CH_HUB_ADR << 7) | QLCNIC_HW_LPC_CRB_AGT_ADR)
+
+#define QLCNIC_SRE_MISC		(QLCNIC_CRB_SRE + 0x0002c)
+
+#define QLCNIC_I2Q_CLR_PCI_HI	(QLCNIC_CRB_I2Q + 0x00034)
+
+#define ROMUSB_GLB		(QLCNIC_CRB_ROMUSB + 0x00000)
+#define ROMUSB_ROM		(QLCNIC_CRB_ROMUSB + 0x10000)
+
+#define QLCNIC_ROMUSB_GLB_STATUS	(ROMUSB_GLB + 0x0004)
+#define QLCNIC_ROMUSB_GLB_SW_RESET	(ROMUSB_GLB + 0x0008)
+#define QLCNIC_ROMUSB_GLB_PAD_GPIO_I	(ROMUSB_GLB + 0x000c)
+#define QLCNIC_ROMUSB_GLB_CAS_RST	(ROMUSB_GLB + 0x0038)
+#define QLCNIC_ROMUSB_GLB_TEST_MUX_SEL	(ROMUSB_GLB + 0x0044)
+#define QLCNIC_ROMUSB_GLB_PEGTUNE_DONE	(ROMUSB_GLB + 0x005c)
+#define QLCNIC_ROMUSB_GLB_CHIP_CLK_CTRL	(ROMUSB_GLB + 0x00A8)
+
+#define QLCNIC_ROMUSB_GPIO(n)		(ROMUSB_GLB + 0x60 + (4 * (n)))
+
+#define QLCNIC_ROMUSB_ROM_INSTR_OPCODE	(ROMUSB_ROM + 0x0004)
+#define QLCNIC_ROMUSB_ROM_ADDRESS	(ROMUSB_ROM + 0x0008)
+#define QLCNIC_ROMUSB_ROM_WDATA		(ROMUSB_ROM + 0x000c)
+#define QLCNIC_ROMUSB_ROM_ABYTE_CNT	(ROMUSB_ROM + 0x0010)
+#define QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT (ROMUSB_ROM + 0x0014)
+#define QLCNIC_ROMUSB_ROM_RDATA		(ROMUSB_ROM + 0x0018)
+
+/* Lock IDs for ROM lock */
+#define ROM_LOCK_DRIVER	0x0d417340
+
+/******************************************************************************
+*
+*    Definitions specific to M25P flash
+*
+*******************************************************************************
+*/
+
+/* all are 1MB windows */
+
+#define QLCNIC_PCI_CRB_WINDOWSIZE	0x00100000
+#define QLCNIC_PCI_CRB_WINDOW(A)	\
+	(QLCNIC_PCI_CRBSPACE + (A)*QLCNIC_PCI_CRB_WINDOWSIZE)
+
+#define QLCNIC_CRB_NIU		QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_NIU)
+#define QLCNIC_CRB_SRE		QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_SRE)
+#define QLCNIC_CRB_ROMUSB	\
+	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_ROMUSB)
+#define QLCNIC_CRB_I2Q		QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_I2Q)
+#define QLCNIC_CRB_I2C0 	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_I2C0)
+#define QLCNIC_CRB_SMB		QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_SMB)
+#define QLCNIC_CRB_MAX		QLCNIC_PCI_CRB_WINDOW(64)
+
+#define QLCNIC_CRB_PCIX_HOST	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PH)
+#define QLCNIC_CRB_PCIX_HOST2	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PH2)
+#define QLCNIC_CRB_PEG_NET_0	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PGN0)
+#define QLCNIC_CRB_PEG_NET_1	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PGN1)
+#define QLCNIC_CRB_PEG_NET_2	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PGN2)
+#define QLCNIC_CRB_PEG_NET_3	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PGN3)
+#define QLCNIC_CRB_PEG_NET_4	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_SQS2)
+#define QLCNIC_CRB_PEG_NET_D	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PGND)
+#define QLCNIC_CRB_PEG_NET_I	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PGNI)
+#define QLCNIC_CRB_DDR_NET	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_MN)
+#define QLCNIC_CRB_QDR_NET	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_SN)
+
+#define QLCNIC_CRB_PCIX_MD	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_PS)
+#define QLCNIC_CRB_PCIE 	QLCNIC_CRB_PCIX_MD
+
+#define ISR_INT_VECTOR		(QLCNIC_PCIX_PS_REG(PCIX_INT_VECTOR))
+#define ISR_INT_MASK		(QLCNIC_PCIX_PS_REG(PCIX_INT_MASK))
+#define ISR_INT_MASK_SLOW	(QLCNIC_PCIX_PS_REG(PCIX_INT_MASK))
+#define ISR_INT_TARGET_STATUS	(QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS))
+#define ISR_INT_TARGET_MASK	(QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK))
+#define ISR_INT_TARGET_STATUS_F1   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F1))
+#define ISR_INT_TARGET_MASK_F1     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F1))
+#define ISR_INT_TARGET_STATUS_F2   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F2))
+#define ISR_INT_TARGET_MASK_F2     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F2))
+#define ISR_INT_TARGET_STATUS_F3   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F3))
+#define ISR_INT_TARGET_MASK_F3     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F3))
+#define ISR_INT_TARGET_STATUS_F4   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F4))
+#define ISR_INT_TARGET_MASK_F4     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F4))
+#define ISR_INT_TARGET_STATUS_F5   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F5))
+#define ISR_INT_TARGET_MASK_F5     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F5))
+#define ISR_INT_TARGET_STATUS_F6   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F6))
+#define ISR_INT_TARGET_MASK_F6     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F6))
+#define ISR_INT_TARGET_STATUS_F7   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F7))
+#define ISR_INT_TARGET_MASK_F7     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F7))
+
+#define QLCNIC_PCI_MN_2M	(0)
+#define QLCNIC_PCI_MS_2M	(0x80000)
+#define QLCNIC_PCI_OCM0_2M	(0x000c0000UL)
+#define QLCNIC_PCI_CRBSPACE	(0x06000000UL)
+#define QLCNIC_PCI_2MB_SIZE	(0x00200000UL)
+#define QLCNIC_PCI_CAMQM_2M_BASE	(0x000ff800UL)
+#define QLCNIC_PCI_CAMQM_2M_END 	(0x04800800UL)
+
+#define QLCNIC_CRB_CAM	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_CAM)
+
+#define QLCNIC_ADDR_DDR_NET	(0x0000000000000000ULL)
+#define QLCNIC_ADDR_DDR_NET_MAX (0x000000000fffffffULL)
+#define QLCNIC_ADDR_OCM0	(0x0000000200000000ULL)
+#define QLCNIC_ADDR_OCM0_MAX	(0x00000002000fffffULL)
+#define QLCNIC_ADDR_OCM1	(0x0000000200400000ULL)
+#define QLCNIC_ADDR_OCM1_MAX	(0x00000002004fffffULL)
+#define QLCNIC_ADDR_QDR_NET	(0x0000000300000000ULL)
+#define QLCNIC_ADDR_QDR_NET_MAX_P3 (0x0000000303ffffffULL)
+
+/*
+ *   Register offsets for MN
+ */
+#define QLCNIC_MIU_CONTROL	(0x000)
+#define QLCNIC_MIU_MN_CONTROL	(QLCNIC_CRB_DDR_NET+QLCNIC_MIU_CONTROL)
+
+/* 200ms delay in each loop */
+#define QLCNIC_NIU_PHY_WAITLEN		200000
+/* 10 seconds before we give up */
+#define QLCNIC_NIU_PHY_WAITMAX		50
+#define QLCNIC_NIU_MAX_GBE_PORTS	4
+#define QLCNIC_NIU_MAX_XG_PORTS		2
+
+#define QLCNIC_NIU_MODE			(QLCNIC_CRB_NIU + 0x00000)
+#define QLCNIC_NIU_GB_PAUSE_CTL		(QLCNIC_CRB_NIU + 0x0030c)
+#define QLCNIC_NIU_XG_PAUSE_CTL		(QLCNIC_CRB_NIU + 0x00098)
+
+#define QLCNIC_NIU_GB_MAC_CONFIG_0(I)		\
+		(QLCNIC_CRB_NIU + 0x30000 + (I)*0x10000)
+#define QLCNIC_NIU_GB_MAC_CONFIG_1(I)		\
+		(QLCNIC_CRB_NIU + 0x30004 + (I)*0x10000)
+
+
+#define TEST_AGT_CTRL	(0x00)
+
+#define TA_CTL_START	1
+#define TA_CTL_ENABLE	2
+#define TA_CTL_WRITE	4
+#define TA_CTL_BUSY	8
+
+/*
+ *   Register offsets for MN
+ */
+#define MIU_TEST_AGT_BASE		(0x90)
+
+#define MIU_TEST_AGT_ADDR_LO		(0x04)
+#define MIU_TEST_AGT_ADDR_HI		(0x08)
+#define MIU_TEST_AGT_WRDATA_LO		(0x10)
+#define MIU_TEST_AGT_WRDATA_HI		(0x14)
+#define MIU_TEST_AGT_WRDATA_UPPER_LO	(0x20)
+#define MIU_TEST_AGT_WRDATA_UPPER_HI	(0x24)
+#define MIU_TEST_AGT_WRDATA(i)		(0x10+(0x10*((i)>>1))+(4*((i)&1)))
+#define MIU_TEST_AGT_RDDATA_LO		(0x18)
+#define MIU_TEST_AGT_RDDATA_HI		(0x1c)
+#define MIU_TEST_AGT_RDDATA_UPPER_LO	(0x28)
+#define MIU_TEST_AGT_RDDATA_UPPER_HI	(0x2c)
+#define MIU_TEST_AGT_RDDATA(i)		(0x18+(0x10*((i)>>1))+(4*((i)&1)))
+
+#define MIU_TEST_AGT_ADDR_MASK		0xfffffff8
+#define MIU_TEST_AGT_UPPER_ADDR(off)	(0)
+
+/*
+ *   Register offsets for MS
+ */
+#define SIU_TEST_AGT_BASE		(0x60)
+
+#define SIU_TEST_AGT_ADDR_LO		(0x04)
+#define SIU_TEST_AGT_ADDR_HI		(0x18)
+#define SIU_TEST_AGT_WRDATA_LO		(0x08)
+#define SIU_TEST_AGT_WRDATA_HI		(0x0c)
+#define SIU_TEST_AGT_WRDATA(i)		(0x08+(4*(i)))
+#define SIU_TEST_AGT_RDDATA_LO		(0x10)
+#define SIU_TEST_AGT_RDDATA_HI		(0x14)
+#define SIU_TEST_AGT_RDDATA(i)		(0x10+(4*(i)))
+
+#define SIU_TEST_AGT_ADDR_MASK		0x3ffff8
+#define SIU_TEST_AGT_UPPER_ADDR(off)	((off)>>22)
+
+/* XG Link status */
+#define XG_LINK_UP	0x10
+#define XG_LINK_DOWN	0x20
+
+#define XG_LINK_UP_P3	0x01
+#define XG_LINK_DOWN_P3	0x02
+#define XG_LINK_STATE_P3_MASK 0xf
+#define XG_LINK_STATE_P3(pcifn, val) \
+	(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
+
+#define P3_LINK_SPEED_MHZ	100
+#define P3_LINK_SPEED_MASK	0xff
+#define P3_LINK_SPEED_REG(pcifn)	\
+	(CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4))
+#define P3_LINK_SPEED_VAL(pcifn, reg)	\
+	(((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK)
+
+#define QLCNIC_CAM_RAM_BASE	(QLCNIC_CRB_CAM + 0x02000)
+#define QLCNIC_CAM_RAM(reg)	(QLCNIC_CAM_RAM_BASE + (reg))
+#define QLCNIC_FW_VERSION_MAJOR (QLCNIC_CAM_RAM(0x150))
+#define QLCNIC_FW_VERSION_MINOR (QLCNIC_CAM_RAM(0x154))
+#define QLCNIC_FW_VERSION_SUB	(QLCNIC_CAM_RAM(0x158))
+#define QLCNIC_ROM_LOCK_ID	(QLCNIC_CAM_RAM(0x100))
+#define QLCNIC_PHY_LOCK_ID	(QLCNIC_CAM_RAM(0x120))
+#define QLCNIC_CRB_WIN_LOCK_ID	(QLCNIC_CAM_RAM(0x124))
+
+#define NIC_CRB_BASE		(QLCNIC_CAM_RAM(0x200))
+#define NIC_CRB_BASE_2		(QLCNIC_CAM_RAM(0x700))
+#define QLCNIC_REG(X)		(NIC_CRB_BASE+(X))
+#define QLCNIC_REG_2(X) 	(NIC_CRB_BASE_2+(X))
+
+#define QLCNIC_CDRP_CRB_OFFSET		(QLCNIC_REG(0x18))
+#define QLCNIC_ARG1_CRB_OFFSET		(QLCNIC_REG(0x1c))
+#define QLCNIC_ARG2_CRB_OFFSET		(QLCNIC_REG(0x20))
+#define QLCNIC_ARG3_CRB_OFFSET		(QLCNIC_REG(0x24))
+#define QLCNIC_SIGN_CRB_OFFSET		(QLCNIC_REG(0x28))
+
+#define CRB_CMDPEG_STATE		(QLCNIC_REG(0x50))
+#define CRB_RCVPEG_STATE		(QLCNIC_REG(0x13c))
+
+#define CRB_XG_STATE_P3 		(QLCNIC_REG(0x98))
+#define CRB_PF_LINK_SPEED_1		(QLCNIC_REG(0xe8))
+#define CRB_PF_LINK_SPEED_2		(QLCNIC_REG(0xec))
+
+#define CRB_MPORT_MODE			(QLCNIC_REG(0xc4))
+#define CRB_DMA_SHIFT			(QLCNIC_REG(0xcc))
+
+#define CRB_TEMP_STATE			(QLCNIC_REG(0x1b4))
+
+#define CRB_V2P_0			(QLCNIC_REG(0x290))
+#define CRB_V2P(port)			(CRB_V2P_0+((port)*4))
+#define CRB_DRIVER_VERSION		(QLCNIC_REG(0x2a0))
+
+#define CRB_SW_INT_MASK_0		(QLCNIC_REG(0x1d8))
+#define CRB_SW_INT_MASK_1		(QLCNIC_REG(0x1e0))
+#define CRB_SW_INT_MASK_2		(QLCNIC_REG(0x1e4))
+#define CRB_SW_INT_MASK_3		(QLCNIC_REG(0x1e8))
+
+#define CRB_FW_CAPABILITIES_1		(QLCNIC_CAM_RAM(0x128))
+#define CRB_MAC_BLOCK_START		(QLCNIC_CAM_RAM(0x1c0))
+
+/*
+ * capabilities register, can be used to selectively enable/disable features
+ * for backward compability
+ */
+#define CRB_NIC_CAPABILITIES_HOST	QLCNIC_REG(0x1a8)
+#define CRB_NIC_CAPABILITIES_FW 	QLCNIC_REG(0x1dc)
+#define CRB_NIC_MSI_MODE_HOST		QLCNIC_REG(0x270)
+#define CRB_NIC_MSI_MODE_FW	  	QLCNIC_REG(0x274)
+
+#define INTR_SCHEME_PERPORT	      	0x1
+#define MSI_MODE_MULTIFUNC	      	0x1
+
+/* used for ethtool tests */
+#define CRB_SCRATCHPAD_TEST	    QLCNIC_REG(0x280)
+
+/*
+ * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
+ * which can be read by the Phantom host to get producer/consumer indexes from
+ * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
+ * registers will be used for the addresses of the ring's shared memory
+ * on the Phantom.
+ */
+
+#define qlcnic_get_temp_val(x)		((x) >> 16)
+#define qlcnic_get_temp_state(x)	((x) & 0xffff)
+#define qlcnic_encode_temp(val, state)	(((val) << 16) | (state))
+
+/*
+ * Temperature control.
+ */
+enum {
+	QLCNIC_TEMP_NORMAL = 0x1,	/* Normal operating range */
+	QLCNIC_TEMP_WARN,	/* Sound alert, temperature getting high */
+	QLCNIC_TEMP_PANIC	/* Fatal error, hardware has shut down. */
+};
+
+/* Lock IDs for PHY lock */
+#define PHY_LOCK_DRIVER		0x44524956
+
+/* Used for PS PCI Memory access */
+#define PCIX_PS_OP_ADDR_LO	(0x10000)
+/*   via CRB  (PS side only)     */
+#define PCIX_PS_OP_ADDR_HI	(0x10004)
+
+#define PCIX_INT_VECTOR 	(0x10100)
+#define PCIX_INT_MASK		(0x10104)
+
+#define PCIX_OCM_WINDOW		(0x10800)
+#define PCIX_OCM_WINDOW_REG(func)	(PCIX_OCM_WINDOW + 0x20 * (func))
+
+#define PCIX_TARGET_STATUS	(0x10118)
+#define PCIX_TARGET_STATUS_F1	(0x10160)
+#define PCIX_TARGET_STATUS_F2	(0x10164)
+#define PCIX_TARGET_STATUS_F3	(0x10168)
+#define PCIX_TARGET_STATUS_F4	(0x10360)
+#define PCIX_TARGET_STATUS_F5	(0x10364)
+#define PCIX_TARGET_STATUS_F6	(0x10368)
+#define PCIX_TARGET_STATUS_F7	(0x1036c)
+
+#define PCIX_TARGET_MASK	(0x10128)
+#define PCIX_TARGET_MASK_F1	(0x10170)
+#define PCIX_TARGET_MASK_F2	(0x10174)
+#define PCIX_TARGET_MASK_F3	(0x10178)
+#define PCIX_TARGET_MASK_F4	(0x10370)
+#define PCIX_TARGET_MASK_F5	(0x10374)
+#define PCIX_TARGET_MASK_F6	(0x10378)
+#define PCIX_TARGET_MASK_F7	(0x1037c)
+
+#define PCIX_MSI_F(i)		(0x13000+((i)*4))
+
+#define QLCNIC_PCIX_PH_REG(reg)	(QLCNIC_CRB_PCIE + (reg))
+#define QLCNIC_PCIX_PS_REG(reg)	(QLCNIC_CRB_PCIX_MD + (reg))
+#define QLCNIC_PCIE_REG(reg)	(QLCNIC_CRB_PCIE + (reg))
+
+#define PCIE_SEM0_LOCK		(0x1c000)
+#define PCIE_SEM0_UNLOCK	(0x1c004)
+#define PCIE_SEM_LOCK(N)	(PCIE_SEM0_LOCK + 8*(N))
+#define PCIE_SEM_UNLOCK(N)	(PCIE_SEM0_UNLOCK + 8*(N))
+
+#define PCIE_SETUP_FUNCTION	(0x12040)
+#define PCIE_SETUP_FUNCTION2	(0x12048)
+#define PCIE_MISCCFG_RC         (0x1206c)
+#define PCIE_TGT_SPLIT_CHICKEN	(0x12080)
+#define PCIE_CHICKEN3		(0x120c8)
+
+#define ISR_INT_STATE_REG       (QLCNIC_PCIX_PS_REG(PCIE_MISCCFG_RC))
+#define PCIE_MAX_MASTER_SPLIT	(0x14048)
+
+#define QLCNIC_PORT_MODE_NONE		0
+#define QLCNIC_PORT_MODE_XG		1
+#define QLCNIC_PORT_MODE_GB		2
+#define QLCNIC_PORT_MODE_802_3_AP	3
+#define QLCNIC_PORT_MODE_AUTO_NEG	4
+#define QLCNIC_PORT_MODE_AUTO_NEG_1G	5
+#define QLCNIC_PORT_MODE_AUTO_NEG_XG	6
+#define QLCNIC_PORT_MODE_ADDR		(QLCNIC_CAM_RAM(0x24))
+#define QLCNIC_WOL_PORT_MODE		(QLCNIC_CAM_RAM(0x198))
+
+#define QLCNIC_WOL_CONFIG_NV		(QLCNIC_CAM_RAM(0x184))
+#define QLCNIC_WOL_CONFIG		(QLCNIC_CAM_RAM(0x188))
+
+#define QLCNIC_PEG_TUNE_MN_PRESENT	0x1
+#define QLCNIC_PEG_TUNE_CAPABILITY	(QLCNIC_CAM_RAM(0x02c))
+
+#define QLCNIC_DMA_WATCHDOG_CTRL	(QLCNIC_CAM_RAM(0x14))
+#define QLCNIC_PEG_ALIVE_COUNTER	(QLCNIC_CAM_RAM(0xb0))
+#define QLCNIC_PEG_HALT_STATUS1 	(QLCNIC_CAM_RAM(0xa8))
+#define QLCNIC_PEG_HALT_STATUS2 	(QLCNIC_CAM_RAM(0xac))
+#define QLCNIC_CRB_DEV_REF_COUNT	(QLCNIC_CAM_RAM(0x138))
+#define QLCNIC_CRB_DEV_STATE		(QLCNIC_CAM_RAM(0x140))
+
+#define QLCNIC_CRB_DRV_STATE               (QLCNIC_CAM_RAM(0x144))
+#define QLCNIC_CRB_DRV_SCRATCH             (QLCNIC_CAM_RAM(0x148))
+#define QLCNIC_CRB_DEV_PARTITION_INFO      (QLCNIC_CAM_RAM(0x14c))
+#define QLCNIC_CRB_DRV_IDC_VER             (QLCNIC_CAM_RAM(0x14c))
+
+		 /* Device State */
+#define QLCNIC_DEV_COLD 		1
+#define QLCNIC_DEV_INITALIZING		2
+#define QLCNIC_DEV_READY		3
+#define QLCNIC_DEV_NEED_RESET		4
+#define QLCNIC_DEV_NEED_QUISCENT	5
+#define QLCNIC_DEV_FAILED		6
+
+#define QLCNIC_RCODE_DRIVER_INFO		0x20000000
+#define QLCNIC_RCODE_DRIVER_CAN_RELOAD		0x40000000
+#define QLCNIC_RCODE_FATAL_ERROR		0x80000000
+#define QLCNIC_FWERROR_PEGNUM(code)		((code) & 0xff)
+#define QLCNIC_FWERROR_CODE(code)		((code >> 8) & 0xfffff)
+
+#define FW_POLL_DELAY			(2 * HZ)
+#define FW_FAIL_THRESH			3
+#define FW_POLL_THRESH			10
+
+#define	ISR_MSI_INT_TRIGGER(FUNC) (QLCNIC_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
+#define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
+
+/*
+ * PCI Interrupt Vector Values.
+ */
+#define	PCIX_INT_VECTOR_BIT_F0	0x0080
+#define	PCIX_INT_VECTOR_BIT_F1	0x0100
+#define	PCIX_INT_VECTOR_BIT_F2	0x0200
+#define	PCIX_INT_VECTOR_BIT_F3	0x0400
+#define	PCIX_INT_VECTOR_BIT_F4	0x0800
+#define	PCIX_INT_VECTOR_BIT_F5	0x1000
+#define	PCIX_INT_VECTOR_BIT_F6	0x2000
+#define	PCIX_INT_VECTOR_BIT_F7	0x4000
+
+struct qlcnic_legacy_intr_set {
+	u32	int_vec_bit;
+	u32	tgt_status_reg;
+	u32	tgt_mask_reg;
+	u32	pci_int_reg;
+};
+
+#define	QLCNIC_LEGACY_INTR_CONFIG					\
+{									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F0,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS,		\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(0) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F1,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F1,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F1,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(1) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F2,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F2,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F2,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(2) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F3,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F3,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F3,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(3) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F4,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F4,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F4,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(4) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F5,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F5,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F5,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(5) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F6,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F6,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F6,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(6) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F7,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F7,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F7,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(7) },	\
+}
+
+/* NIU REGS */
+
+#define _qlcnic_crb_get_bit(var, bit)  ((var >> bit) & 0x1)
+
+/*
+ * NIU GB MAC Config Register 0 (applies to GB0, GB1, GB2, GB3)
+ *
+ *	Bit 0 : enable_tx => 1:enable frame xmit, 0:disable
+ *	Bit 1 : tx_synced => R/O: xmit enable synched to xmit stream
+ *	Bit 2 : enable_rx => 1:enable frame recv, 0:disable
+ *	Bit 3 : rx_synced => R/O: recv enable synched to recv stream
+ *	Bit 4 : tx_flowctl => 1:enable pause frame generation, 0:disable
+ *	Bit 5 : rx_flowctl => 1:act on recv'd pause frames, 0:ignore
+ *	Bit 8 : loopback => 1:loop MAC xmits to MAC recvs, 0:normal
+ *	Bit 16: tx_reset_pb => 1:reset frame xmit protocol blk, 0:no-op
+ *	Bit 17: rx_reset_pb => 1:reset frame recv protocol blk, 0:no-op
+ *	Bit 18: tx_reset_mac => 1:reset data/ctl multiplexer blk, 0:no-op
+ *	Bit 19: rx_reset_mac => 1:reset ctl frames & timers blk, 0:no-op
+ *	Bit 31: soft_reset => 1:reset the MAC and the SERDES, 0:no-op
+ */
+#define qlcnic_gb_rx_flowctl(config_word)	\
+	((config_word) |= 1 << 5)
+#define qlcnic_gb_get_rx_flowctl(config_word)	\
+	_qlcnic_crb_get_bit((config_word), 5)
+#define qlcnic_gb_unset_rx_flowctl(config_word)	\
+	((config_word) &= ~(1 << 5))
+
+/*
+ * NIU GB Pause Ctl Register
+ */
+
+#define qlcnic_gb_set_gb0_mask(config_word)    \
+	((config_word) |= 1 << 0)
+#define qlcnic_gb_set_gb1_mask(config_word)    \
+	((config_word) |= 1 << 2)
+#define qlcnic_gb_set_gb2_mask(config_word)    \
+	((config_word) |= 1 << 4)
+#define qlcnic_gb_set_gb3_mask(config_word)    \
+	((config_word) |= 1 << 6)
+
+#define qlcnic_gb_get_gb0_mask(config_word)    \
+	_qlcnic_crb_get_bit((config_word), 0)
+#define qlcnic_gb_get_gb1_mask(config_word)    \
+	_qlcnic_crb_get_bit((config_word), 2)
+#define qlcnic_gb_get_gb2_mask(config_word)    \
+	_qlcnic_crb_get_bit((config_word), 4)
+#define qlcnic_gb_get_gb3_mask(config_word)    \
+	_qlcnic_crb_get_bit((config_word), 6)
+
+#define qlcnic_gb_unset_gb0_mask(config_word)  \
+	((config_word) &= ~(1 << 0))
+#define qlcnic_gb_unset_gb1_mask(config_word)  \
+	((config_word) &= ~(1 << 2))
+#define qlcnic_gb_unset_gb2_mask(config_word)  \
+	((config_word) &= ~(1 << 4))
+#define qlcnic_gb_unset_gb3_mask(config_word)  \
+	((config_word) &= ~(1 << 6))
+
+/*
+ * NIU XG Pause Ctl Register
+ *
+ *      Bit 0       : xg0_mask => 1:disable tx pause frames
+ *      Bit 1       : xg0_request => 1:request single pause frame
+ *      Bit 2       : xg0_on_off => 1:request is pause on, 0:off
+ *      Bit 3       : xg1_mask => 1:disable tx pause frames
+ *      Bit 4       : xg1_request => 1:request single pause frame
+ *      Bit 5       : xg1_on_off => 1:request is pause on, 0:off
+ */
+
+#define qlcnic_xg_set_xg0_mask(config_word)    \
+	((config_word) |= 1 << 0)
+#define qlcnic_xg_set_xg1_mask(config_word)    \
+	((config_word) |= 1 << 3)
+
+#define qlcnic_xg_get_xg0_mask(config_word)    \
+	_qlcnic_crb_get_bit((config_word), 0)
+#define qlcnic_xg_get_xg1_mask(config_word)    \
+	_qlcnic_crb_get_bit((config_word), 3)
+
+#define qlcnic_xg_unset_xg0_mask(config_word)  \
+	((config_word) &= ~(1 << 0))
+#define qlcnic_xg_unset_xg1_mask(config_word)  \
+	((config_word) &= ~(1 << 3))
+
+/*
+ * NIU XG Pause Ctl Register
+ *
+ *      Bit 0       : xg0_mask => 1:disable tx pause frames
+ *      Bit 1       : xg0_request => 1:request single pause frame
+ *      Bit 2       : xg0_on_off => 1:request is pause on, 0:off
+ *      Bit 3       : xg1_mask => 1:disable tx pause frames
+ *      Bit 4       : xg1_request => 1:request single pause frame
+ *      Bit 5       : xg1_on_off => 1:request is pause on, 0:off
+ */
+
+/*
+ * PHY-Specific MII control/status registers.
+ */
+#define QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG		4
+#define QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS		17
+
+/*
+ * PHY-Specific Status Register (reg 17).
+ *
+ * Bit 0      : jabber => 1:jabber detected, 0:not
+ * Bit 1      : polarity => 1:polarity reversed, 0:normal
+ * Bit 2      : recvpause => 1:receive pause enabled, 0:disabled
+ * Bit 3      : xmitpause => 1:transmit pause enabled, 0:disabled
+ * Bit 4      : energydetect => 1:sleep, 0:active
+ * Bit 5      : downshift => 1:downshift, 0:no downshift
+ * Bit 6      : crossover => 1:MDIX (crossover), 0:MDI (no crossover)
+ * Bits 7-9   : cablelen => not valid in 10Mb/s mode
+ *			0:<50m, 1:50-80m, 2:80-110m, 3:110-140m, 4:>140m
+ * Bit 10     : link => 1:link up, 0:link down
+ * Bit 11     : resolved => 1:speed and duplex resolved, 0:not yet
+ * Bit 12     : pagercvd => 1:page received, 0:page not received
+ * Bit 13     : duplex => 1:full duplex, 0:half duplex
+ * Bits 14-15 : speed => 0:10Mb/s, 1:100Mb/s, 2:1000Mb/s, 3:rsvd
+ */
+
+#define qlcnic_get_phy_speed(config_word) (((config_word) >> 14) & 0x03)
+
+#define qlcnic_set_phy_speed(config_word, val)	\
+		((config_word) |= ((val & 0x03) << 14))
+#define qlcnic_set_phy_duplex(config_word)	\
+		((config_word) |= 1 << 13)
+#define qlcnic_clear_phy_duplex(config_word)	\
+		((config_word) &= ~(1 << 13))
+
+#define qlcnic_get_phy_link(config_word)	\
+		_qlcnic_crb_get_bit(config_word, 10)
+#define qlcnic_get_phy_duplex(config_word)	\
+		_qlcnic_crb_get_bit(config_word, 13)
+
+#define QLCNIC_NIU_NON_PROMISC_MODE	0
+#define QLCNIC_NIU_PROMISC_MODE		1
+#define QLCNIC_NIU_ALLMULTI_MODE	2
+
+struct crb_128M_2M_sub_block_map {
+	unsigned valid;
+	unsigned start_128M;
+	unsigned end_128M;
+	unsigned start_2M;
+};
+
+struct crb_128M_2M_block_map{
+	struct crb_128M_2M_sub_block_map sub_block[16];
+};
+#endif				/* __QLCNIC_HDR_H_ */
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
new file mode 100644
index 000000000000..91234e7b39e4
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -0,0 +1,1201 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#include "qlcnic.h"
+
+#include <net/ip.h>
+
+#define MASK(n) ((1ULL<<(n))-1)
+#define OCM_WIN_P3P(addr) (addr & 0xffc0000)
+
+#define GET_MEM_OFFS_2M(addr) (addr & MASK(18))
+
+#define CRB_BLK(off)	((off >> 20) & 0x3f)
+#define CRB_SUBBLK(off)	((off >> 16) & 0xf)
+#define CRB_WINDOW_2M	(0x130060)
+#define CRB_HI(off)	((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000))
+#define CRB_INDIRECT_2M	(0x1e0000UL)
+
+
+#ifndef readq
+static inline u64 readq(void __iomem *addr)
+{
+	return readl(addr) | (((u64) readl(addr + 4)) << 32LL);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(u64 val, void __iomem *addr)
+{
+	writel(((u32) (val)), (addr));
+	writel(((u32) (val >> 32)), (addr + 4));
+}
+#endif
+
+#define ADDR_IN_RANGE(addr, low, high)	\
+	(((addr) < (high)) && ((addr) >= (low)))
+
+#define PCI_OFFSET_FIRST_RANGE(adapter, off)    \
+	((adapter)->ahw.pci_base0 + (off))
+
+static void __iomem *pci_base_offset(struct qlcnic_adapter *adapter,
+					    unsigned long off)
+{
+	if (ADDR_IN_RANGE(off, FIRST_PAGE_GROUP_START, FIRST_PAGE_GROUP_END))
+		return PCI_OFFSET_FIRST_RANGE(adapter, off);
+
+	return NULL;
+}
+
+static const struct crb_128M_2M_block_map
+crb_128M_2M_map[64] __cacheline_aligned_in_smp = {
+    {{{0, 0,         0,         0} } },		/* 0: PCI */
+    {{{1, 0x0100000, 0x0102000, 0x120000},	/* 1: PCIE */
+	  {1, 0x0110000, 0x0120000, 0x130000},
+	  {1, 0x0120000, 0x0122000, 0x124000},
+	  {1, 0x0130000, 0x0132000, 0x126000},
+	  {1, 0x0140000, 0x0142000, 0x128000},
+	  {1, 0x0150000, 0x0152000, 0x12a000},
+	  {1, 0x0160000, 0x0170000, 0x110000},
+	  {1, 0x0170000, 0x0172000, 0x12e000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {1, 0x01e0000, 0x01e0800, 0x122000},
+	  {0, 0x0000000, 0x0000000, 0x000000} } },
+	{{{1, 0x0200000, 0x0210000, 0x180000} } },/* 2: MN */
+    {{{0, 0,         0,         0} } },	    /* 3: */
+    {{{1, 0x0400000, 0x0401000, 0x169000} } },/* 4: P2NR1 */
+    {{{1, 0x0500000, 0x0510000, 0x140000} } },/* 5: SRE   */
+    {{{1, 0x0600000, 0x0610000, 0x1c0000} } },/* 6: NIU   */
+    {{{1, 0x0700000, 0x0704000, 0x1b8000} } },/* 7: QM    */
+    {{{1, 0x0800000, 0x0802000, 0x170000},  /* 8: SQM0  */
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x08f0000, 0x08f2000, 0x172000} } },
+    {{{1, 0x0900000, 0x0902000, 0x174000},	/* 9: SQM1*/
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x09f0000, 0x09f2000, 0x176000} } },
+    {{{0, 0x0a00000, 0x0a02000, 0x178000},	/* 10: SQM2*/
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x0af0000, 0x0af2000, 0x17a000} } },
+    {{{0, 0x0b00000, 0x0b02000, 0x17c000},	/* 11: SQM3*/
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x0bf0000, 0x0bf2000, 0x17e000} } },
+	{{{1, 0x0c00000, 0x0c04000, 0x1d4000} } },/* 12: I2Q */
+	{{{1, 0x0d00000, 0x0d04000, 0x1a4000} } },/* 13: TMR */
+	{{{1, 0x0e00000, 0x0e04000, 0x1a0000} } },/* 14: ROMUSB */
+	{{{1, 0x0f00000, 0x0f01000, 0x164000} } },/* 15: PEG4 */
+	{{{0, 0x1000000, 0x1004000, 0x1a8000} } },/* 16: XDMA */
+	{{{1, 0x1100000, 0x1101000, 0x160000} } },/* 17: PEG0 */
+	{{{1, 0x1200000, 0x1201000, 0x161000} } },/* 18: PEG1 */
+	{{{1, 0x1300000, 0x1301000, 0x162000} } },/* 19: PEG2 */
+	{{{1, 0x1400000, 0x1401000, 0x163000} } },/* 20: PEG3 */
+	{{{1, 0x1500000, 0x1501000, 0x165000} } },/* 21: P2ND */
+	{{{1, 0x1600000, 0x1601000, 0x166000} } },/* 22: P2NI */
+	{{{0, 0,         0,         0} } },	/* 23: */
+	{{{0, 0,         0,         0} } },	/* 24: */
+	{{{0, 0,         0,         0} } },	/* 25: */
+	{{{0, 0,         0,         0} } },	/* 26: */
+	{{{0, 0,         0,         0} } },	/* 27: */
+	{{{0, 0,         0,         0} } },	/* 28: */
+	{{{1, 0x1d00000, 0x1d10000, 0x190000} } },/* 29: MS */
+    {{{1, 0x1e00000, 0x1e01000, 0x16a000} } },/* 30: P2NR2 */
+    {{{1, 0x1f00000, 0x1f10000, 0x150000} } },/* 31: EPG */
+	{{{0} } },				/* 32: PCI */
+	{{{1, 0x2100000, 0x2102000, 0x120000},	/* 33: PCIE */
+	  {1, 0x2110000, 0x2120000, 0x130000},
+	  {1, 0x2120000, 0x2122000, 0x124000},
+	  {1, 0x2130000, 0x2132000, 0x126000},
+	  {1, 0x2140000, 0x2142000, 0x128000},
+	  {1, 0x2150000, 0x2152000, 0x12a000},
+	  {1, 0x2160000, 0x2170000, 0x110000},
+	  {1, 0x2170000, 0x2172000, 0x12e000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000} } },
+	{{{1, 0x2200000, 0x2204000, 0x1b0000} } },/* 34: CAM */
+	{{{0} } },				/* 35: */
+	{{{0} } },				/* 36: */
+	{{{0} } },				/* 37: */
+	{{{0} } },				/* 38: */
+	{{{0} } },				/* 39: */
+	{{{1, 0x2800000, 0x2804000, 0x1a4000} } },/* 40: TMR */
+	{{{1, 0x2900000, 0x2901000, 0x16b000} } },/* 41: P2NR3 */
+	{{{1, 0x2a00000, 0x2a00400, 0x1ac400} } },/* 42: RPMX1 */
+	{{{1, 0x2b00000, 0x2b00400, 0x1ac800} } },/* 43: RPMX2 */
+	{{{1, 0x2c00000, 0x2c00400, 0x1acc00} } },/* 44: RPMX3 */
+	{{{1, 0x2d00000, 0x2d00400, 0x1ad000} } },/* 45: RPMX4 */
+	{{{1, 0x2e00000, 0x2e00400, 0x1ad400} } },/* 46: RPMX5 */
+	{{{1, 0x2f00000, 0x2f00400, 0x1ad800} } },/* 47: RPMX6 */
+	{{{1, 0x3000000, 0x3000400, 0x1adc00} } },/* 48: RPMX7 */
+	{{{0, 0x3100000, 0x3104000, 0x1a8000} } },/* 49: XDMA */
+	{{{1, 0x3200000, 0x3204000, 0x1d4000} } },/* 50: I2Q */
+	{{{1, 0x3300000, 0x3304000, 0x1a0000} } },/* 51: ROMUSB */
+	{{{0} } },				/* 52: */
+	{{{1, 0x3500000, 0x3500400, 0x1ac000} } },/* 53: RPMX0 */
+	{{{1, 0x3600000, 0x3600400, 0x1ae000} } },/* 54: RPMX8 */
+	{{{1, 0x3700000, 0x3700400, 0x1ae400} } },/* 55: RPMX9 */
+	{{{1, 0x3800000, 0x3804000, 0x1d0000} } },/* 56: OCM0 */
+	{{{1, 0x3900000, 0x3904000, 0x1b4000} } },/* 57: CRYPTO */
+	{{{1, 0x3a00000, 0x3a04000, 0x1d8000} } },/* 58: SMB */
+	{{{0} } },				/* 59: I2C0 */
+	{{{0} } },				/* 60: I2C1 */
+	{{{1, 0x3d00000, 0x3d04000, 0x1d8000} } },/* 61: LPC */
+	{{{1, 0x3e00000, 0x3e01000, 0x167000} } },/* 62: P2NC */
+	{{{1, 0x3f00000, 0x3f01000, 0x168000} } }	/* 63: P2NR0 */
+};
+
+/*
+ * top 12 bits of crb internal address (hub, agent)
+ */
+static const unsigned crb_hub_agt[64] = {
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PS,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_MN,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_MS,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SRE,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_NIU,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_QMN,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SQN0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SQN1,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SQN2,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SQN3,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_I2Q,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_TIMR,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_ROMUSB,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGN4,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_XDMA,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGN0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGN1,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGN2,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGN3,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGND,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGNI,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGS0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGS1,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGS2,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGS3,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGSI,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SN,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_EG,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PS,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_CAM,
+	0,
+	0,
+	0,
+	0,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_TIMR,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX1,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX2,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX3,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX4,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX5,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX6,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX7,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_XDMA,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_I2Q,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_ROMUSB,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX8,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_RPMX9,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_OCM0,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_SMB,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_I2C0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_I2C1,
+	0,
+	QLCNIC_HW_CRB_HUB_AGT_ADR_PGNC,
+	0,
+};
+
+/*  PCI Windowing for DDR regions.  */
+
+#define QLCNIC_PCIE_SEM_TIMEOUT	10000
+
+int
+qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg)
+{
+	int done = 0, timeout = 0;
+
+	while (!done) {
+		done = QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_LOCK(sem)));
+		if (done == 1)
+			break;
+		if (++timeout >= QLCNIC_PCIE_SEM_TIMEOUT)
+			return -EIO;
+		msleep(1);
+	}
+
+	if (id_reg)
+		QLCWR32(adapter, id_reg, adapter->portnum);
+
+	return 0;
+}
+
+void
+qlcnic_pcie_sem_unlock(struct qlcnic_adapter *adapter, int sem)
+{
+	QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_UNLOCK(sem)));
+}
+
+static int
+qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
+		struct cmd_desc_type0 *cmd_desc_arr, int nr_desc)
+{
+	u32 i, producer, consumer;
+	struct qlcnic_cmd_buffer *pbuf;
+	struct cmd_desc_type0 *cmd_desc;
+	struct qlcnic_host_tx_ring *tx_ring;
+
+	i = 0;
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return -EIO;
+
+	tx_ring = adapter->tx_ring;
+	__netif_tx_lock_bh(tx_ring->txq);
+
+	producer = tx_ring->producer;
+	consumer = tx_ring->sw_consumer;
+
+	if (nr_desc >= qlcnic_tx_avail(tx_ring)) {
+		netif_tx_stop_queue(tx_ring->txq);
+		__netif_tx_unlock_bh(tx_ring->txq);
+		return -EBUSY;
+	}
+
+	do {
+		cmd_desc = &cmd_desc_arr[i];
+
+		pbuf = &tx_ring->cmd_buf_arr[producer];
+		pbuf->skb = NULL;
+		pbuf->frag_count = 0;
+
+		memcpy(&tx_ring->desc_head[producer],
+			&cmd_desc_arr[i], sizeof(struct cmd_desc_type0));
+
+		producer = get_next_index(producer, tx_ring->num_desc);
+		i++;
+
+	} while (i != nr_desc);
+
+	tx_ring->producer = producer;
+
+	qlcnic_update_cmd_producer(adapter, tx_ring);
+
+	__netif_tx_unlock_bh(tx_ring->txq);
+
+	return 0;
+}
+
+static int
+qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
+				unsigned op)
+{
+	struct qlcnic_nic_req req;
+	struct qlcnic_mac_req *mac_req;
+	u64 word;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_REQUEST << 23);
+
+	word = QLCNIC_MAC_EVENT | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	mac_req = (struct qlcnic_mac_req *)&req.words[0];
+	mac_req->op = op;
+	memcpy(mac_req->mac_addr, addr, 6);
+
+	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+}
+
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter,
+		u8 *addr, struct list_head *del_list)
+{
+	struct list_head *head;
+	struct qlcnic_mac_list_s *cur;
+
+	/* look up if already exists */
+	list_for_each(head, del_list) {
+		cur = list_entry(head, struct qlcnic_mac_list_s, list);
+
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
+			list_move_tail(head, &adapter->mac_list);
+			return 0;
+		}
+	}
+
+	cur = kzalloc(sizeof(struct qlcnic_mac_list_s), GFP_ATOMIC);
+	if (cur == NULL) {
+		dev_err(&adapter->netdev->dev,
+			"failed to add mac address filter\n");
+		return -ENOMEM;
+	}
+	memcpy(cur->mac_addr, addr, ETH_ALEN);
+	list_add_tail(&cur->list, &adapter->mac_list);
+
+	return qlcnic_sre_macaddr_change(adapter,
+				cur->mac_addr, QLCNIC_MAC_ADD);
+}
+
+void qlcnic_set_multi(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct dev_mc_list *mc_ptr;
+	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	u32 mode = VPORT_MISS_MODE_DROP;
+	LIST_HEAD(del_list);
+	struct list_head *head;
+	struct qlcnic_mac_list_s *cur;
+
+	list_splice_tail_init(&adapter->mac_list, &del_list);
+
+	qlcnic_nic_add_mac(adapter, adapter->mac_addr, &del_list);
+	qlcnic_nic_add_mac(adapter, bcast_addr, &del_list);
+
+	if (netdev->flags & IFF_PROMISC) {
+		mode = VPORT_MISS_MODE_ACCEPT_ALL;
+		goto send_fw_cmd;
+	}
+
+	if ((netdev->flags & IFF_ALLMULTI) ||
+			(netdev->mc_count > adapter->max_mc_count)) {
+		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
+		goto send_fw_cmd;
+	}
+
+	if (netdev->mc_count > 0) {
+		for (mc_ptr = netdev->mc_list; mc_ptr;
+				     mc_ptr = mc_ptr->next) {
+			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
+							&del_list);
+		}
+	}
+
+send_fw_cmd:
+	qlcnic_nic_set_promisc(adapter, mode);
+	head = &del_list;
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
+
+		qlcnic_sre_macaddr_change(adapter,
+				cur->mac_addr, QLCNIC_MAC_DEL);
+		list_del(&cur->list);
+		kfree(cur);
+	}
+}
+
+int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+			((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	req.words[0] = cpu_to_le64(mode);
+
+	return qlcnic_send_cmd_descs(adapter,
+				(struct cmd_desc_type0 *)&req, 1);
+}
+
+void qlcnic_free_mac_list(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_mac_list_s *cur;
+	struct list_head *head = &adapter->mac_list;
+
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
+		qlcnic_sre_macaddr_change(adapter,
+				cur->mac_addr, QLCNIC_MAC_DEL);
+		list_del(&cur->list);
+		kfree(cur);
+	}
+}
+
+#define	QLCNIC_CONFIG_INTR_COALESCE	3
+
+/*
+ * Send the interrupt coalescing parameter set by ethtool to the card.
+ */
+int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_nic_req req;
+	u64 word[6];
+	int rv, i;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word[0] = QLCNIC_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word[0]);
+
+	memcpy(&word[0], &adapter->coal, sizeof(adapter->coal));
+	for (i = 0; i < 6; i++)
+		req.words[i] = cpu_to_le64(word[i]);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev,
+			"Could not send interrupt coalescing parameters\n");
+
+	return rv;
+}
+
+int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+	int rv;
+
+	if ((adapter->flags & QLCNIC_LRO_ENABLED) == enable)
+		return 0;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_CONFIG_HW_LRO | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	req.words[0] = cpu_to_le64(enable);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev,
+			"Could not send configure hw lro request\n");
+
+	adapter->flags ^= QLCNIC_LRO_ENABLED;
+
+	return rv;
+}
+
+int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, int enable)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+	int rv;
+
+	if (!!(adapter->flags & QLCNIC_BRIDGE_ENABLED) == enable)
+		return 0;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_CONFIG_BRIDGING |
+		((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	req.words[0] = cpu_to_le64(enable);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev,
+			"Could not send configure bridge mode request\n");
+
+	adapter->flags ^= QLCNIC_BRIDGE_ENABLED;
+
+	return rv;
+}
+
+
+#define RSS_HASHTYPE_IP_TCP	0x3
+
+int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+	int i, rv;
+
+	const u64 key[] = { 0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
+			0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
+			0x255b0ec26d5a56daULL };
+
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_CONFIG_RSS | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	/*
+	 * RSS request:
+	 * bits 3-0: hash_method
+	 *      5-4: hash_type_ipv4
+	 *	7-6: hash_type_ipv6
+	 *	  8: enable
+	 *        9: use indirection table
+	 *    47-10: reserved
+	 *    63-48: indirection table mask
+	 */
+	word =  ((u64)(RSS_HASHTYPE_IP_TCP & 0x3) << 4) |
+		((u64)(RSS_HASHTYPE_IP_TCP & 0x3) << 6) |
+		((u64)(enable & 0x1) << 8) |
+		((0x7ULL) << 48);
+	req.words[0] = cpu_to_le64(word);
+	for (i = 0; i < 5; i++)
+		req.words[i+1] = cpu_to_le64(key[i]);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev, "could not configure RSS\n");
+
+	return rv;
+}
+
+int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+	int rv;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_CONFIG_IPADDR | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	req.words[0] = cpu_to_le64(cmd);
+	req.words[1] = cpu_to_le64(ip);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev,
+				"could not notify %s IP 0x%x reuqest\n",
+				(cmd == QLCNIC_IP_UP) ? "Add" : "Remove", ip);
+
+	return rv;
+}
+
+int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+	int rv;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_GET_LINKEVENT | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+	req.words[0] = cpu_to_le64(enable | (enable << 8));
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev,
+				"could not configure link notification\n");
+
+	return rv;
+}
+
+int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_nic_req req;
+	u64 word;
+	int rv;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_LRO_REQUEST |
+		((u64)adapter->portnum << 16) |
+		((u64)QLCNIC_LRO_REQUEST_CLEANUP << 56) ;
+
+	req.req_hdr = cpu_to_le64(word);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0)
+		dev_err(&adapter->netdev->dev,
+				 "could not cleanup lro flows\n");
+
+	return rv;
+}
+
+/*
+ * qlcnic_change_mtu - Change the Maximum Transfer Unit
+ * @returns 0 on success, negative on failure
+ */
+
+int qlcnic_change_mtu(struct net_device *netdev, int mtu)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int rc = 0;
+
+	if (mtu > P3_MAX_MTU) {
+		dev_err(&adapter->netdev->dev, "mtu > %d bytes unsupported\n",
+						P3_MAX_MTU);
+		return -EINVAL;
+	}
+
+	rc = qlcnic_fw_cmd_set_mtu(adapter, mtu);
+
+	if (!rc)
+		netdev->mtu = mtu;
+
+	return rc;
+}
+
+int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac)
+{
+	u32 crbaddr, mac_hi, mac_lo;
+	int pci_func = adapter->ahw.pci_func;
+
+	crbaddr = CRB_MAC_BLOCK_START +
+		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
+
+	mac_lo = QLCRD32(adapter, crbaddr);
+	mac_hi = QLCRD32(adapter, crbaddr+4);
+
+	if (pci_func & 1)
+		*mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
+	else
+		*mac = le64_to_cpu((u64)mac_lo | ((u64)mac_hi << 32));
+
+	return 0;
+}
+
+/*
+ * Changes the CRB window to the specified window.
+ */
+ /* Returns < 0 if off is not valid,
+ *	 1 if window access is needed. 'off' is set to offset from
+ *	   CRB space in 128M pci map
+ *	 0 if no window access is needed. 'off' is set to 2M addr
+ * In: 'off' is offset from base in 128M pci map
+ */
+static int
+qlcnic_pci_get_crb_addr_2M(struct qlcnic_adapter *adapter,
+		ulong off, void __iomem **addr)
+{
+	const struct crb_128M_2M_sub_block_map *m;
+
+	if ((off >= QLCNIC_CRB_MAX) || (off < QLCNIC_PCI_CRBSPACE))
+		return -EINVAL;
+
+	off -= QLCNIC_PCI_CRBSPACE;
+
+	/*
+	 * Try direct map
+	 */
+	m = &crb_128M_2M_map[CRB_BLK(off)].sub_block[CRB_SUBBLK(off)];
+
+	if (m->valid && (m->start_128M <= off) && (m->end_128M > off)) {
+		*addr = adapter->ahw.pci_base0 + m->start_2M +
+			(off - m->start_128M);
+		return 0;
+	}
+
+	/*
+	 * Not in direct map, use crb window
+	 */
+	*addr = adapter->ahw.pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
+	return 1;
+}
+
+/*
+ * In: 'off' is offset from CRB space in 128M pci map
+ * Out: 'off' is 2M pci map addr
+ * side effect: lock crb window
+ */
+static void
+qlcnic_pci_set_crbwindow_2M(struct qlcnic_adapter *adapter, ulong off)
+{
+	u32 window;
+	void __iomem *addr = adapter->ahw.pci_base0 + CRB_WINDOW_2M;
+
+	off -= QLCNIC_PCI_CRBSPACE;
+
+	window = CRB_HI(off);
+
+	if (adapter->ahw.crb_win == window)
+		return;
+
+	writel(window, addr);
+	if (readl(addr) != window) {
+		if (printk_ratelimit())
+			dev_warn(&adapter->pdev->dev,
+				"failed to set CRB window to %d off 0x%lx\n",
+				window, off);
+	}
+	adapter->ahw.crb_win = window;
+}
+
+int
+qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, u32 data)
+{
+	unsigned long flags;
+	int rv;
+	void __iomem *addr = NULL;
+
+	rv = qlcnic_pci_get_crb_addr_2M(adapter, off, &addr);
+
+	if (rv == 0) {
+		writel(data, addr);
+		return 0;
+	}
+
+	if (rv > 0) {
+		/* indirect access */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		crb_win_lock(adapter);
+		qlcnic_pci_set_crbwindow_2M(adapter, off);
+		writel(data, addr);
+		crb_win_unlock(adapter);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		return 0;
+	}
+
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -EIO;
+}
+
+u32
+qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off)
+{
+	unsigned long flags;
+	int rv;
+	u32 data;
+	void __iomem *addr = NULL;
+
+	rv = qlcnic_pci_get_crb_addr_2M(adapter, off, &addr);
+
+	if (rv == 0)
+		return readl(addr);
+
+	if (rv > 0) {
+		/* indirect access */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		crb_win_lock(adapter);
+		qlcnic_pci_set_crbwindow_2M(adapter, off);
+		data = readl(addr);
+		crb_win_unlock(adapter);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		return data;
+	}
+
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -1;
+}
+
+
+void __iomem *
+qlcnic_get_ioaddr(struct qlcnic_adapter *adapter, u32 offset)
+{
+	void __iomem *addr = NULL;
+
+	WARN_ON(qlcnic_pci_get_crb_addr_2M(adapter, offset, &addr));
+
+	return addr;
+}
+
+
+static int
+qlcnic_pci_set_window_2M(struct qlcnic_adapter *adapter,
+		u64 addr, u32 *start)
+{
+	u32 window;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if ((addr & 0x00ff800) == 0xff800) {
+		if (printk_ratelimit())
+			dev_warn(&pdev->dev, "QM access not handled\n");
+		return -EIO;
+	}
+
+	window = OCM_WIN_P3P(addr);
+
+	writel(window, adapter->ahw.ocm_win_crb);
+	/* read back to flush */
+	readl(adapter->ahw.ocm_win_crb);
+
+	adapter->ahw.ocm_win = window;
+	*start = QLCNIC_PCI_OCM0_2M + GET_MEM_OFFS_2M(addr);
+	return 0;
+}
+
+static int
+qlcnic_pci_mem_access_direct(struct qlcnic_adapter *adapter, u64 off,
+		u64 *data, int op)
+{
+	void __iomem *addr, *mem_ptr = NULL;
+	resource_size_t mem_base;
+	int ret;
+	u32 start;
+
+	mutex_lock(&adapter->ahw.mem_lock);
+
+	ret = qlcnic_pci_set_window_2M(adapter, off, &start);
+	if (ret != 0)
+		goto unlock;
+
+	addr = pci_base_offset(adapter, start);
+	if (addr)
+		goto noremap;
+
+	mem_base = pci_resource_start(adapter->pdev, 0) + (start & PAGE_MASK);
+
+	mem_ptr = ioremap(mem_base, PAGE_SIZE);
+	if (mem_ptr == NULL) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	addr = mem_ptr + (start & (PAGE_SIZE - 1));
+
+noremap:
+	if (op == 0)	/* read */
+		*data = readq(addr);
+	else		/* write */
+		writeq(*data, addr);
+
+unlock:
+	mutex_unlock(&adapter->ahw.mem_lock);
+
+	if (mem_ptr)
+		iounmap(mem_ptr);
+	return ret;
+}
+
+#define MAX_CTL_CHECK   1000
+
+int
+qlcnic_pci_mem_write_2M(struct qlcnic_adapter *adapter,
+		u64 off, u64 data)
+{
+	int i, j, ret;
+	u32 temp, off8;
+	u64 stride;
+	void __iomem *mem_crb;
+
+	/* Only 64-bit aligned access */
+	if (off & 7)
+		return -EIO;
+
+	/* P3 onward, test agent base for MIU and SIU is same */
+	if (ADDR_IN_RANGE(off, QLCNIC_ADDR_QDR_NET,
+				QLCNIC_ADDR_QDR_NET_MAX_P3)) {
+		mem_crb = qlcnic_get_ioaddr(adapter,
+				QLCNIC_CRB_QDR_NET+MIU_TEST_AGT_BASE);
+		goto correct;
+	}
+
+	if (ADDR_IN_RANGE(off, QLCNIC_ADDR_DDR_NET, QLCNIC_ADDR_DDR_NET_MAX)) {
+		mem_crb = qlcnic_get_ioaddr(adapter,
+				QLCNIC_CRB_DDR_NET+MIU_TEST_AGT_BASE);
+		goto correct;
+	}
+
+	if (ADDR_IN_RANGE(off, QLCNIC_ADDR_OCM0, QLCNIC_ADDR_OCM0_MAX))
+		return qlcnic_pci_mem_access_direct(adapter, off, &data, 1);
+
+	return -EIO;
+
+correct:
+	stride = QLCNIC_IS_REVISION_P3P(adapter->ahw.revision_id) ? 16 : 8;
+
+	off8 = off & ~(stride-1);
+
+	mutex_lock(&adapter->ahw.mem_lock);
+
+	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
+
+	i = 0;
+	if (stride == 16) {
+		writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+		writel((TA_CTL_START | TA_CTL_ENABLE),
+				(mem_crb + TEST_AGT_CTRL));
+
+		for (j = 0; j < MAX_CTL_CHECK; j++) {
+			temp = readl(mem_crb + TEST_AGT_CTRL);
+			if ((temp & TA_CTL_BUSY) == 0)
+				break;
+		}
+
+		if (j >= MAX_CTL_CHECK) {
+			ret = -EIO;
+			goto done;
+		}
+
+		i = (off & 0xf) ? 0 : 2;
+		writel(readl(mem_crb + MIU_TEST_AGT_RDDATA(i)),
+				mem_crb + MIU_TEST_AGT_WRDATA(i));
+		writel(readl(mem_crb + MIU_TEST_AGT_RDDATA(i+1)),
+				mem_crb + MIU_TEST_AGT_WRDATA(i+1));
+		i = (off & 0xf) ? 2 : 0;
+	}
+
+	writel(data & 0xffffffff,
+			mem_crb + MIU_TEST_AGT_WRDATA(i));
+	writel((data >> 32) & 0xffffffff,
+			mem_crb + MIU_TEST_AGT_WRDATA(i+1));
+
+	writel((TA_CTL_ENABLE | TA_CTL_WRITE), (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE | TA_CTL_WRITE),
+			(mem_crb + TEST_AGT_CTRL));
+
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
+			break;
+	}
+
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to write through agent\n");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+done:
+	mutex_unlock(&adapter->ahw.mem_lock);
+
+	return ret;
+}
+
+int
+qlcnic_pci_mem_read_2M(struct qlcnic_adapter *adapter,
+		u64 off, u64 *data)
+{
+	int j, ret;
+	u32 temp, off8;
+	u64 val, stride;
+	void __iomem *mem_crb;
+
+	/* Only 64-bit aligned access */
+	if (off & 7)
+		return -EIO;
+
+	/* P3 onward, test agent base for MIU and SIU is same */
+	if (ADDR_IN_RANGE(off, QLCNIC_ADDR_QDR_NET,
+				QLCNIC_ADDR_QDR_NET_MAX_P3)) {
+		mem_crb = qlcnic_get_ioaddr(adapter,
+				QLCNIC_CRB_QDR_NET+MIU_TEST_AGT_BASE);
+		goto correct;
+	}
+
+	if (ADDR_IN_RANGE(off, QLCNIC_ADDR_DDR_NET, QLCNIC_ADDR_DDR_NET_MAX)) {
+		mem_crb = qlcnic_get_ioaddr(adapter,
+				QLCNIC_CRB_DDR_NET+MIU_TEST_AGT_BASE);
+		goto correct;
+	}
+
+	if (ADDR_IN_RANGE(off, QLCNIC_ADDR_OCM0, QLCNIC_ADDR_OCM0_MAX)) {
+		return qlcnic_pci_mem_access_direct(adapter,
+				off, data, 0);
+	}
+
+	return -EIO;
+
+correct:
+	stride = QLCNIC_IS_REVISION_P3P(adapter->ahw.revision_id) ? 16 : 8;
+
+	off8 = off & ~(stride-1);
+
+	mutex_lock(&adapter->ahw.mem_lock);
+
+	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
+	writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE), (mem_crb + TEST_AGT_CTRL));
+
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
+			break;
+	}
+
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+		ret = -EIO;
+	} else {
+		off8 = MIU_TEST_AGT_RDDATA_LO;
+		if ((stride == 16) && (off & 0xf))
+			off8 = MIU_TEST_AGT_RDDATA_UPPER_LO;
+
+		temp = readl(mem_crb + off8 + 4);
+		val = (u64)temp << 32;
+		val |= readl(mem_crb + off8);
+		*data = val;
+		ret = 0;
+	}
+
+	mutex_unlock(&adapter->ahw.mem_lock);
+
+	return ret;
+}
+
+int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
+{
+	int offset, board_type, magic;
+	struct pci_dev *pdev = adapter->pdev;
+
+	offset = QLCNIC_FW_MAGIC_OFFSET;
+	if (qlcnic_rom_fast_read(adapter, offset, &magic))
+		return -EIO;
+
+	if (magic != QLCNIC_BDINFO_MAGIC) {
+		dev_err(&pdev->dev, "invalid board config, magic=%08x\n",
+			magic);
+		return -EIO;
+	}
+
+	offset = QLCNIC_BRDTYPE_OFFSET;
+	if (qlcnic_rom_fast_read(adapter, offset, &board_type))
+		return -EIO;
+
+	adapter->ahw.board_type = board_type;
+
+	if (board_type == QLCNIC_BRDTYPE_P3_4_GB_MM) {
+		u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
+		if ((gpio & 0x8000) == 0)
+			board_type = QLCNIC_BRDTYPE_P3_10G_TP;
+	}
+
+	switch (board_type) {
+	case QLCNIC_BRDTYPE_P3_HMEZ:
+	case QLCNIC_BRDTYPE_P3_XG_LOM:
+	case QLCNIC_BRDTYPE_P3_10G_CX4:
+	case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
+	case QLCNIC_BRDTYPE_P3_IMEZ:
+	case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
+	case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
+	case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
+	case QLCNIC_BRDTYPE_P3_10G_XFP:
+	case QLCNIC_BRDTYPE_P3_10000_BASE_T:
+		adapter->ahw.port_type = QLCNIC_XGBE;
+		break;
+	case QLCNIC_BRDTYPE_P3_REF_QG:
+	case QLCNIC_BRDTYPE_P3_4_GB:
+	case QLCNIC_BRDTYPE_P3_4_GB_MM:
+		adapter->ahw.port_type = QLCNIC_GBE;
+		break;
+	case QLCNIC_BRDTYPE_P3_10G_TP:
+		adapter->ahw.port_type = (adapter->portnum < 2) ?
+			QLCNIC_XGBE : QLCNIC_GBE;
+		break;
+	default:
+		dev_err(&pdev->dev, "unknown board type %x\n", board_type);
+		adapter->ahw.port_type = QLCNIC_XGBE;
+		break;
+	}
+
+	return 0;
+}
+
+int
+qlcnic_wol_supported(struct qlcnic_adapter *adapter)
+{
+	u32 wol_cfg;
+
+	wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
+	if (wol_cfg & (1UL << adapter->portnum)) {
+		wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
+		if (wol_cfg & (1 << adapter->portnum))
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
new file mode 100644
index 000000000000..7ae8bcc1e439
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -0,0 +1,1466 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include "qlcnic.h"
+
+struct crb_addr_pair {
+	u32 addr;
+	u32 data;
+};
+
+#define QLCNIC_MAX_CRB_XFORM 60
+static unsigned int crb_addr_xform[QLCNIC_MAX_CRB_XFORM];
+
+#define crb_addr_transform(name) \
+	(crb_addr_xform[QLCNIC_HW_PX_MAP_CRB_##name] = \
+	QLCNIC_HW_CRB_HUB_AGT_ADR_##name << 20)
+
+#define QLCNIC_ADDR_ERROR (0xffffffff)
+
+static void
+qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_rds_ring *rds_ring);
+
+static void crb_addr_transform_setup(void)
+{
+	crb_addr_transform(XDMA);
+	crb_addr_transform(TIMR);
+	crb_addr_transform(SRE);
+	crb_addr_transform(SQN3);
+	crb_addr_transform(SQN2);
+	crb_addr_transform(SQN1);
+	crb_addr_transform(SQN0);
+	crb_addr_transform(SQS3);
+	crb_addr_transform(SQS2);
+	crb_addr_transform(SQS1);
+	crb_addr_transform(SQS0);
+	crb_addr_transform(RPMX7);
+	crb_addr_transform(RPMX6);
+	crb_addr_transform(RPMX5);
+	crb_addr_transform(RPMX4);
+	crb_addr_transform(RPMX3);
+	crb_addr_transform(RPMX2);
+	crb_addr_transform(RPMX1);
+	crb_addr_transform(RPMX0);
+	crb_addr_transform(ROMUSB);
+	crb_addr_transform(SN);
+	crb_addr_transform(QMN);
+	crb_addr_transform(QMS);
+	crb_addr_transform(PGNI);
+	crb_addr_transform(PGND);
+	crb_addr_transform(PGN3);
+	crb_addr_transform(PGN2);
+	crb_addr_transform(PGN1);
+	crb_addr_transform(PGN0);
+	crb_addr_transform(PGSI);
+	crb_addr_transform(PGSD);
+	crb_addr_transform(PGS3);
+	crb_addr_transform(PGS2);
+	crb_addr_transform(PGS1);
+	crb_addr_transform(PGS0);
+	crb_addr_transform(PS);
+	crb_addr_transform(PH);
+	crb_addr_transform(NIU);
+	crb_addr_transform(I2Q);
+	crb_addr_transform(EG);
+	crb_addr_transform(MN);
+	crb_addr_transform(MS);
+	crb_addr_transform(CAS2);
+	crb_addr_transform(CAS1);
+	crb_addr_transform(CAS0);
+	crb_addr_transform(CAM);
+	crb_addr_transform(C2C1);
+	crb_addr_transform(C2C0);
+	crb_addr_transform(SMB);
+	crb_addr_transform(OCM0);
+	crb_addr_transform(I2C0);
+}
+
+void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_recv_context *recv_ctx;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct qlcnic_rx_buffer *rx_buf;
+	int i, ring;
+
+	recv_ctx = &adapter->recv_ctx;
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		rds_ring = &recv_ctx->rds_rings[ring];
+		for (i = 0; i < rds_ring->num_desc; ++i) {
+			rx_buf = &(rds_ring->rx_buf_arr[i]);
+			if (rx_buf->state == QLCNIC_BUFFER_FREE)
+				continue;
+			pci_unmap_single(adapter->pdev,
+					rx_buf->dma,
+					rds_ring->dma_size,
+					PCI_DMA_FROMDEVICE);
+			if (rx_buf->skb != NULL)
+				dev_kfree_skb_any(rx_buf->skb);
+		}
+	}
+}
+
+void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_cmd_buffer *cmd_buf;
+	struct qlcnic_skb_frag *buffrag;
+	int i, j;
+	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
+
+	cmd_buf = tx_ring->cmd_buf_arr;
+	for (i = 0; i < tx_ring->num_desc; i++) {
+		buffrag = cmd_buf->frag_array;
+		if (buffrag->dma) {
+			pci_unmap_single(adapter->pdev, buffrag->dma,
+					 buffrag->length, PCI_DMA_TODEVICE);
+			buffrag->dma = 0ULL;
+		}
+		for (j = 0; j < cmd_buf->frag_count; j++) {
+			buffrag++;
+			if (buffrag->dma) {
+				pci_unmap_page(adapter->pdev, buffrag->dma,
+					       buffrag->length,
+					       PCI_DMA_TODEVICE);
+				buffrag->dma = 0ULL;
+			}
+		}
+		if (cmd_buf->skb) {
+			dev_kfree_skb_any(cmd_buf->skb);
+			cmd_buf->skb = NULL;
+		}
+		cmd_buf++;
+	}
+}
+
+void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_recv_context *recv_ctx;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct qlcnic_host_tx_ring *tx_ring;
+	int ring;
+
+	recv_ctx = &adapter->recv_ctx;
+
+	if (recv_ctx->rds_rings == NULL)
+		goto skip_rds;
+
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		rds_ring = &recv_ctx->rds_rings[ring];
+		vfree(rds_ring->rx_buf_arr);
+		rds_ring->rx_buf_arr = NULL;
+	}
+	kfree(recv_ctx->rds_rings);
+
+skip_rds:
+	if (adapter->tx_ring == NULL)
+		return;
+
+	tx_ring = adapter->tx_ring;
+	vfree(tx_ring->cmd_buf_arr);
+	kfree(adapter->tx_ring);
+}
+
+int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_recv_context *recv_ctx;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_host_tx_ring *tx_ring;
+	struct qlcnic_rx_buffer *rx_buf;
+	int ring, i, size;
+
+	struct qlcnic_cmd_buffer *cmd_buf_arr;
+	struct net_device *netdev = adapter->netdev;
+
+	size = sizeof(struct qlcnic_host_tx_ring);
+	tx_ring = kzalloc(size, GFP_KERNEL);
+	if (tx_ring == NULL) {
+		dev_err(&netdev->dev, "failed to allocate tx ring struct\n");
+		return -ENOMEM;
+	}
+	adapter->tx_ring = tx_ring;
+
+	tx_ring->num_desc = adapter->num_txd;
+	tx_ring->txq = netdev_get_tx_queue(netdev, 0);
+
+	cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
+	if (cmd_buf_arr == NULL) {
+		dev_err(&netdev->dev, "failed to allocate cmd buffer ring\n");
+		return -ENOMEM;
+	}
+	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
+	tx_ring->cmd_buf_arr = cmd_buf_arr;
+
+	recv_ctx = &adapter->recv_ctx;
+
+	size = adapter->max_rds_rings * sizeof(struct qlcnic_host_rds_ring);
+	rds_ring = kzalloc(size, GFP_KERNEL);
+	if (rds_ring == NULL) {
+		dev_err(&netdev->dev, "failed to allocate rds ring struct\n");
+		return -ENOMEM;
+	}
+	recv_ctx->rds_rings = rds_ring;
+
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		rds_ring = &recv_ctx->rds_rings[ring];
+		switch (ring) {
+		case RCV_RING_NORMAL:
+			rds_ring->num_desc = adapter->num_rxd;
+			if (adapter->ahw.cut_through) {
+				rds_ring->dma_size =
+					QLCNIC_CT_DEFAULT_RX_BUF_LEN;
+				rds_ring->skb_size =
+					QLCNIC_CT_DEFAULT_RX_BUF_LEN;
+			} else {
+				rds_ring->dma_size =
+					QLCNIC_P3_RX_BUF_MAX_LEN;
+				rds_ring->skb_size =
+					rds_ring->dma_size + NET_IP_ALIGN;
+			}
+			break;
+
+		case RCV_RING_JUMBO:
+			rds_ring->num_desc = adapter->num_jumbo_rxd;
+			rds_ring->dma_size =
+				QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN;
+
+			if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
+				rds_ring->dma_size += QLCNIC_LRO_BUFFER_EXTRA;
+
+			rds_ring->skb_size =
+				rds_ring->dma_size + NET_IP_ALIGN;
+			break;
+
+		case RCV_RING_LRO:
+			rds_ring->num_desc = adapter->num_lro_rxd;
+			rds_ring->dma_size = QLCNIC_RX_LRO_BUFFER_LENGTH;
+			rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN;
+			break;
+
+		}
+		rds_ring->rx_buf_arr = (struct qlcnic_rx_buffer *)
+			vmalloc(RCV_BUFF_RINGSIZE(rds_ring));
+		if (rds_ring->rx_buf_arr == NULL) {
+			dev_err(&netdev->dev, "Failed to allocate "
+				"rx buffer ring %d\n", ring);
+			goto err_out;
+		}
+		memset(rds_ring->rx_buf_arr, 0, RCV_BUFF_RINGSIZE(rds_ring));
+		INIT_LIST_HEAD(&rds_ring->free_list);
+		/*
+		 * Now go through all of them, set reference handles
+		 * and put them in the queues.
+		 */
+		rx_buf = rds_ring->rx_buf_arr;
+		for (i = 0; i < rds_ring->num_desc; i++) {
+			list_add_tail(&rx_buf->list,
+					&rds_ring->free_list);
+			rx_buf->ref_handle = i;
+			rx_buf->state = QLCNIC_BUFFER_FREE;
+			rx_buf++;
+		}
+		spin_lock_init(&rds_ring->lock);
+	}
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		sds_ring->irq = adapter->msix_entries[ring].vector;
+		sds_ring->adapter = adapter;
+		sds_ring->num_desc = adapter->num_rxd;
+
+		for (i = 0; i < NUM_RCV_DESC_RINGS; i++)
+			INIT_LIST_HEAD(&sds_ring->free_list[i]);
+	}
+
+	return 0;
+
+err_out:
+	qlcnic_free_sw_resources(adapter);
+	return -ENOMEM;
+}
+
+/*
+ * Utility to translate from internal Phantom CRB address
+ * to external PCI CRB address.
+ */
+static u32 qlcnic_decode_crb_addr(u32 addr)
+{
+	int i;
+	u32 base_addr, offset, pci_base;
+
+	crb_addr_transform_setup();
+
+	pci_base = QLCNIC_ADDR_ERROR;
+	base_addr = addr & 0xfff00000;
+	offset = addr & 0x000fffff;
+
+	for (i = 0; i < QLCNIC_MAX_CRB_XFORM; i++) {
+		if (crb_addr_xform[i] == base_addr) {
+			pci_base = i << 20;
+			break;
+		}
+	}
+	if (pci_base == QLCNIC_ADDR_ERROR)
+		return pci_base;
+	else
+		return pci_base + offset;
+}
+
+#define QLCNIC_MAX_ROM_WAIT_USEC	100
+
+static int qlcnic_wait_rom_done(struct qlcnic_adapter *adapter)
+{
+	long timeout = 0;
+	long done = 0;
+
+	cond_resched();
+
+	while (done == 0) {
+		done = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_STATUS);
+		done &= 2;
+		if (++timeout >= QLCNIC_MAX_ROM_WAIT_USEC) {
+			dev_err(&adapter->pdev->dev,
+				"Timeout reached  waiting for rom done");
+			return -EIO;
+		}
+		udelay(1);
+	}
+	return 0;
+}
+
+static int do_rom_fast_read(struct qlcnic_adapter *adapter,
+			    int addr, int *valp)
+{
+	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ADDRESS, addr);
+	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ABYTE_CNT, 3);
+	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_INSTR_OPCODE, 0xb);
+	if (qlcnic_wait_rom_done(adapter)) {
+		dev_err(&adapter->pdev->dev, "Error waiting for rom done\n");
+		return -EIO;
+	}
+	/* reset abyte_cnt and dummy_byte_cnt */
+	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ABYTE_CNT, 0);
+	udelay(10);
+	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+
+	*valp = QLCRD32(adapter, QLCNIC_ROMUSB_ROM_RDATA);
+	return 0;
+}
+
+static int do_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
+				  u8 *bytes, size_t size)
+{
+	int addridx;
+	int ret = 0;
+
+	for (addridx = addr; addridx < (addr + size); addridx += 4) {
+		int v;
+		ret = do_rom_fast_read(adapter, addridx, &v);
+		if (ret != 0)
+			break;
+		*(__le32 *)bytes = cpu_to_le32(v);
+		bytes += 4;
+	}
+
+	return ret;
+}
+
+int
+qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
+				u8 *bytes, size_t size)
+{
+	int ret;
+
+	ret = qlcnic_rom_lock(adapter);
+	if (ret < 0)
+		return ret;
+
+	ret = do_rom_fast_read_words(adapter, addr, bytes, size);
+
+	qlcnic_rom_unlock(adapter);
+	return ret;
+}
+
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp)
+{
+	int ret;
+
+	if (qlcnic_rom_lock(adapter) != 0)
+		return -EIO;
+
+	ret = do_rom_fast_read(adapter, addr, valp);
+	qlcnic_rom_unlock(adapter);
+	return ret;
+}
+
+int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter)
+{
+	int addr, val;
+	int i, n, init_delay;
+	struct crb_addr_pair *buf;
+	unsigned offset;
+	u32 off;
+	struct pci_dev *pdev = adapter->pdev;
+
+	/* resetall */
+	qlcnic_rom_lock(adapter);
+	QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0xffffffff);
+	qlcnic_rom_unlock(adapter);
+
+	if (qlcnic_rom_fast_read(adapter, 0, &n) != 0 || (n != 0xcafecafe) ||
+			qlcnic_rom_fast_read(adapter, 4, &n) != 0) {
+		dev_err(&pdev->dev, "ERROR Reading crb_init area: val:%x\n", n);
+		return -EIO;
+	}
+	offset = n & 0xffffU;
+	n = (n >> 16) & 0xffffU;
+
+	if (n >= 1024) {
+		dev_err(&pdev->dev, "QLOGIC card flash not initialized.\n");
+		return -EIO;
+	}
+
+	buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL);
+	if (buf == NULL) {
+		dev_err(&pdev->dev, "Unable to calloc memory for rom read.\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < n; i++) {
+		if (qlcnic_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
+		qlcnic_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
+			kfree(buf);
+			return -EIO;
+		}
+
+		buf[i].addr = addr;
+		buf[i].data = val;
+	}
+
+	for (i = 0; i < n; i++) {
+
+		off = qlcnic_decode_crb_addr(buf[i].addr);
+		if (off == QLCNIC_ADDR_ERROR) {
+			dev_err(&pdev->dev, "CRB init value out of range %x\n",
+					buf[i].addr);
+			continue;
+		}
+		off += QLCNIC_PCI_CRBSPACE;
+
+		if (off & 1)
+			continue;
+
+		/* skipping cold reboot MAGIC */
+		if (off == QLCNIC_CAM_RAM(0x1fc))
+			continue;
+		if (off == (QLCNIC_CRB_I2C0 + 0x1c))
+			continue;
+		if (off == (ROMUSB_GLB + 0xbc)) /* do not reset PCI */
+			continue;
+		if (off == (ROMUSB_GLB + 0xa8))
+			continue;
+		if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
+			continue;
+		if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
+			continue;
+		if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
+			continue;
+		if ((off & 0x0ff00000) == QLCNIC_CRB_DDR_NET)
+			continue;
+		/* skip the function enable register */
+		if (off == QLCNIC_PCIE_REG(PCIE_SETUP_FUNCTION))
+			continue;
+		if (off == QLCNIC_PCIE_REG(PCIE_SETUP_FUNCTION2))
+			continue;
+		if ((off & 0x0ff00000) == QLCNIC_CRB_SMB)
+			continue;
+
+		init_delay = 1;
+		/* After writing this register, HW needs time for CRB */
+		/* to quiet down (else crb_window returns 0xffffffff) */
+		if (off == QLCNIC_ROMUSB_GLB_SW_RESET)
+			init_delay = 1000;
+
+		QLCWR32(adapter, off, buf[i].data);
+
+		msleep(init_delay);
+	}
+	kfree(buf);
+
+	/* p2dn replyCount */
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_D + 0xec, 0x1e);
+	/* disable_peg_cache 0 & 1*/
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_D + 0x4c, 8);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_I + 0x4c, 8);
+
+	/* peg_clr_all */
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x8, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0xc, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x8, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_1 + 0xc, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_2 + 0x8, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_2 + 0xc, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x8, 0);
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_3 + 0xc, 0);
+	return 0;
+}
+
+static int
+qlcnic_has_mn(struct qlcnic_adapter *adapter)
+{
+	u32 capability, flashed_ver;
+	capability = 0;
+
+	qlcnic_rom_fast_read(adapter,
+			QLCNIC_FW_VERSION_OFFSET, (int *)&flashed_ver);
+	flashed_ver = QLCNIC_DECODE_VERSION(flashed_ver);
+
+	if (flashed_ver >= QLCNIC_VERSION_CODE(4, 0, 220)) {
+
+		capability = QLCRD32(adapter, QLCNIC_PEG_TUNE_CAPABILITY);
+		if (capability & QLCNIC_PEG_TUNE_MN_PRESENT)
+			return 1;
+	}
+	return 0;
+}
+
+static
+struct uni_table_desc *qlcnic_get_table_desc(const u8 *unirom, int section)
+{
+	u32 i;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 entries = cpu_to_le32(directory->num_entries);
+
+	for (i = 0; i < entries; i++) {
+
+		__le32 offs = cpu_to_le32(directory->findex) +
+				(i * cpu_to_le32(directory->entry_size));
+		__le32 tab_type = cpu_to_le32(*((u32 *)&unirom[offs] + 8));
+
+		if (tab_type == section)
+			return (struct uni_table_desc *) &unirom[offs];
+	}
+
+	return NULL;
+}
+
+static int
+qlcnic_set_product_offs(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *ptab_descr;
+	const u8 *unirom = adapter->fw->data;
+	u32 i;
+	__le32 entries;
+	int mn_present = qlcnic_has_mn(adapter);
+
+	ptab_descr = qlcnic_get_table_desc(unirom,
+				QLCNIC_UNI_DIR_SECT_PRODUCT_TBL);
+	if (ptab_descr == NULL)
+		return -1;
+
+	entries = cpu_to_le32(ptab_descr->num_entries);
+nomn:
+	for (i = 0; i < entries; i++) {
+
+		__le32 flags, file_chiprev, offs;
+		u8 chiprev = adapter->ahw.revision_id;
+		u32 flagbit;
+
+		offs = cpu_to_le32(ptab_descr->findex) +
+				(i * cpu_to_le32(ptab_descr->entry_size));
+		flags = cpu_to_le32(*((int *)&unirom[offs] +
+						QLCNIC_UNI_FLAGS_OFF));
+		file_chiprev = cpu_to_le32(*((int *)&unirom[offs] +
+						QLCNIC_UNI_CHIP_REV_OFF));
+
+		flagbit = mn_present ? 1 : 2;
+
+		if ((chiprev == file_chiprev) &&
+					((1ULL << flagbit) & flags)) {
+			adapter->file_prd_off = offs;
+			return 0;
+		}
+	}
+	if (mn_present) {
+		mn_present = 0;
+		goto nomn;
+	}
+	return -1;
+}
+
+static
+struct uni_data_desc *qlcnic_get_data_desc(struct qlcnic_adapter *adapter,
+			u32 section, u32 idx_offset)
+{
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+								idx_offset));
+	struct uni_table_desc *tab_desc;
+	__le32 offs;
+
+	tab_desc = qlcnic_get_table_desc(unirom, section);
+
+	if (tab_desc == NULL)
+		return NULL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size) * idx);
+
+	return (struct uni_data_desc *)&unirom[offs];
+}
+
+static u8 *
+qlcnic_get_bootld_offs(struct qlcnic_adapter *adapter)
+{
+	u32 offs = QLCNIC_BOOTLD_START;
+
+	if (adapter->fw_type == QLCNIC_UNIFIED_ROMIMAGE)
+		offs = cpu_to_le32((qlcnic_get_data_desc(adapter,
+					QLCNIC_UNI_DIR_SECT_BOOTLD,
+					QLCNIC_UNI_BOOTLD_IDX_OFF))->findex);
+
+	return (u8 *)&adapter->fw->data[offs];
+}
+
+static u8 *
+qlcnic_get_fw_offs(struct qlcnic_adapter *adapter)
+{
+	u32 offs = QLCNIC_IMAGE_START;
+
+	if (adapter->fw_type == QLCNIC_UNIFIED_ROMIMAGE)
+		offs = cpu_to_le32((qlcnic_get_data_desc(adapter,
+					QLCNIC_UNI_DIR_SECT_FW,
+					QLCNIC_UNI_FIRMWARE_IDX_OFF))->findex);
+
+	return (u8 *)&adapter->fw->data[offs];
+}
+
+static __le32
+qlcnic_get_fw_size(struct qlcnic_adapter *adapter)
+{
+	if (adapter->fw_type == QLCNIC_UNIFIED_ROMIMAGE)
+		return cpu_to_le32((qlcnic_get_data_desc(adapter,
+					QLCNIC_UNI_DIR_SECT_FW,
+					QLCNIC_UNI_FIRMWARE_IDX_OFF))->size);
+	else
+		return cpu_to_le32(
+			*(u32 *)&adapter->fw->data[QLCNIC_FW_SIZE_OFFSET]);
+}
+
+static __le32
+qlcnic_get_fw_version(struct qlcnic_adapter *adapter)
+{
+	struct uni_data_desc *fw_data_desc;
+	const struct firmware *fw = adapter->fw;
+	__le32 major, minor, sub;
+	const u8 *ver_str;
+	int i, ret;
+
+	if (adapter->fw_type != QLCNIC_UNIFIED_ROMIMAGE)
+		return cpu_to_le32(*(u32 *)&fw->data[QLCNIC_FW_VERSION_OFFSET]);
+
+	fw_data_desc = qlcnic_get_data_desc(adapter, QLCNIC_UNI_DIR_SECT_FW,
+			QLCNIC_UNI_FIRMWARE_IDX_OFF);
+	ver_str = fw->data + cpu_to_le32(fw_data_desc->findex) +
+		cpu_to_le32(fw_data_desc->size) - 17;
+
+	for (i = 0; i < 12; i++) {
+		if (!strncmp(&ver_str[i], "REV=", 4)) {
+			ret = sscanf(&ver_str[i+4], "%u.%u.%u ",
+					&major, &minor, &sub);
+			if (ret != 3)
+				return 0;
+			else
+				return major + (minor << 8) + (sub << 16);
+		}
+	}
+
+	return 0;
+}
+
+static __le32
+qlcnic_get_bios_version(struct qlcnic_adapter *adapter)
+{
+	const struct firmware *fw = adapter->fw;
+	__le32 bios_ver, prd_off = adapter->file_prd_off;
+
+	if (adapter->fw_type != QLCNIC_UNIFIED_ROMIMAGE)
+		return cpu_to_le32(
+			*(u32 *)&fw->data[QLCNIC_BIOS_VERSION_OFFSET]);
+
+	bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
+				+ QLCNIC_UNI_BIOS_VERSION_OFF));
+
+	return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
+}
+
+int
+qlcnic_need_fw_reset(struct qlcnic_adapter *adapter)
+{
+	u32 count, old_count;
+	u32 val, version, major, minor, build;
+	int i, timeout;
+
+	if (adapter->need_fw_reset)
+		return 1;
+
+	/* last attempt had failed */
+	if (QLCRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+		return 1;
+
+	old_count = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
+
+	for (i = 0; i < 10; i++) {
+
+		timeout = msleep_interruptible(200);
+		if (timeout) {
+			QLCWR32(adapter, CRB_CMDPEG_STATE,
+					PHAN_INITIALIZE_FAILED);
+			return -EINTR;
+		}
+
+		count = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
+		if (count != old_count)
+			break;
+	}
+
+	/* firmware is dead */
+	if (count == old_count)
+		return 1;
+
+	/* check if we have got newer or different file firmware */
+	if (adapter->fw) {
+
+		val = qlcnic_get_fw_version(adapter);
+
+		version = QLCNIC_DECODE_VERSION(val);
+
+		major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR);
+		minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR);
+		build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB);
+
+		if (version > QLCNIC_VERSION_CODE(major, minor, build))
+			return 1;
+	}
+
+	return 0;
+}
+
+static const char *fw_name[] = {
+	QLCNIC_UNIFIED_ROMIMAGE_NAME,
+	QLCNIC_FLASH_ROMIMAGE_NAME,
+};
+
+int
+qlcnic_load_firmware(struct qlcnic_adapter *adapter)
+{
+	u64 *ptr64;
+	u32 i, flashaddr, size;
+	const struct firmware *fw = adapter->fw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	dev_info(&pdev->dev, "loading firmware from %s\n",
+			fw_name[adapter->fw_type]);
+
+	if (fw) {
+		__le64 data;
+
+		size = (QLCNIC_IMAGE_START - QLCNIC_BOOTLD_START) / 8;
+
+		ptr64 = (u64 *)qlcnic_get_bootld_offs(adapter);
+		flashaddr = QLCNIC_BOOTLD_START;
+
+		for (i = 0; i < size; i++) {
+			data = cpu_to_le64(ptr64[i]);
+
+			if (qlcnic_pci_mem_write_2M(adapter, flashaddr, data))
+				return -EIO;
+
+			flashaddr += 8;
+		}
+
+		size = (__force u32)qlcnic_get_fw_size(adapter) / 8;
+
+		ptr64 = (u64 *)qlcnic_get_fw_offs(adapter);
+		flashaddr = QLCNIC_IMAGE_START;
+
+		for (i = 0; i < size; i++) {
+			data = cpu_to_le64(ptr64[i]);
+
+			if (qlcnic_pci_mem_write_2M(adapter,
+						flashaddr, data))
+				return -EIO;
+
+			flashaddr += 8;
+		}
+	} else {
+		u64 data;
+		u32 hi, lo;
+
+		size = (QLCNIC_IMAGE_START - QLCNIC_BOOTLD_START) / 8;
+		flashaddr = QLCNIC_BOOTLD_START;
+
+		for (i = 0; i < size; i++) {
+			if (qlcnic_rom_fast_read(adapter,
+					flashaddr, (int *)&lo) != 0)
+				return -EIO;
+			if (qlcnic_rom_fast_read(adapter,
+					flashaddr + 4, (int *)&hi) != 0)
+				return -EIO;
+
+			data = (((u64)hi << 32) | lo);
+
+			if (qlcnic_pci_mem_write_2M(adapter,
+						flashaddr, data))
+				return -EIO;
+
+			flashaddr += 8;
+		}
+	}
+	msleep(1);
+
+	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x18, 0x1020);
+	QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0x80001e);
+	return 0;
+}
+
+static int
+qlcnic_validate_firmware(struct qlcnic_adapter *adapter)
+{
+	__le32 val;
+	u32 ver, min_ver, bios, min_size;
+	struct pci_dev *pdev = adapter->pdev;
+	const struct firmware *fw = adapter->fw;
+	u8 fw_type = adapter->fw_type;
+
+	if (fw_type == QLCNIC_UNIFIED_ROMIMAGE) {
+		if (qlcnic_set_product_offs(adapter))
+			return -EINVAL;
+
+		min_size = QLCNIC_UNI_FW_MIN_SIZE;
+	} else {
+		val = cpu_to_le32(*(u32 *)&fw->data[QLCNIC_FW_MAGIC_OFFSET]);
+		if ((__force u32)val != QLCNIC_BDINFO_MAGIC)
+			return -EINVAL;
+
+		min_size = QLCNIC_FW_MIN_SIZE;
+	}
+
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	val = qlcnic_get_fw_version(adapter);
+
+	min_ver = QLCNIC_VERSION_CODE(4, 0, 216);
+
+	ver = QLCNIC_DECODE_VERSION(val);
+
+	if ((_major(ver) > _QLCNIC_LINUX_MAJOR) || (ver < min_ver)) {
+		dev_err(&pdev->dev,
+				"%s: firmware version %d.%d.%d unsupported\n",
+		fw_name[fw_type], _major(ver), _minor(ver), _build(ver));
+		return -EINVAL;
+	}
+
+	val = qlcnic_get_bios_version(adapter);
+	qlcnic_rom_fast_read(adapter, QLCNIC_BIOS_VERSION_OFFSET, (int *)&bios);
+	if ((__force u32)val != bios) {
+		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
+				fw_name[fw_type]);
+		return -EINVAL;
+	}
+
+	/* check if flashed firmware is newer */
+	if (qlcnic_rom_fast_read(adapter,
+			QLCNIC_FW_VERSION_OFFSET, (int *)&val))
+		return -EIO;
+
+	val = QLCNIC_DECODE_VERSION(val);
+	if (val > ver) {
+		dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+				fw_name[fw_type]);
+		return -EINVAL;
+	}
+
+	QLCWR32(adapter, QLCNIC_CAM_RAM(0x1fc), QLCNIC_BDINFO_MAGIC);
+	return 0;
+}
+
+static void
+qlcnic_get_next_fwtype(struct qlcnic_adapter *adapter)
+{
+	u8 fw_type;
+
+	switch (adapter->fw_type) {
+	case QLCNIC_UNKNOWN_ROMIMAGE:
+		fw_type = QLCNIC_UNIFIED_ROMIMAGE;
+		break;
+
+	case QLCNIC_UNIFIED_ROMIMAGE:
+	default:
+		fw_type = QLCNIC_FLASH_ROMIMAGE;
+		break;
+	}
+
+	adapter->fw_type = fw_type;
+}
+
+
+
+void qlcnic_request_firmware(struct qlcnic_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int rc;
+
+	adapter->fw_type = QLCNIC_UNKNOWN_ROMIMAGE;
+
+next:
+	qlcnic_get_next_fwtype(adapter);
+
+	if (adapter->fw_type == QLCNIC_FLASH_ROMIMAGE) {
+		adapter->fw = NULL;
+	} else {
+		rc = request_firmware(&adapter->fw,
+				fw_name[adapter->fw_type], &pdev->dev);
+		if (rc != 0)
+			goto next;
+
+		rc = qlcnic_validate_firmware(adapter);
+		if (rc != 0) {
+			release_firmware(adapter->fw);
+			msleep(1);
+			goto next;
+		}
+	}
+}
+
+
+void
+qlcnic_release_firmware(struct qlcnic_adapter *adapter)
+{
+	if (adapter->fw)
+		release_firmware(adapter->fw);
+	adapter->fw = NULL;
+}
+
+int qlcnic_phantom_init(struct qlcnic_adapter *adapter)
+{
+	u32 val;
+	int retries = 60;
+
+	do {
+		val = QLCRD32(adapter, CRB_CMDPEG_STATE);
+
+		switch (val) {
+		case PHAN_INITIALIZE_COMPLETE:
+		case PHAN_INITIALIZE_ACK:
+			return 0;
+		case PHAN_INITIALIZE_FAILED:
+			goto out_err;
+		default:
+			break;
+		}
+
+		msleep(500);
+
+	} while (--retries);
+
+	QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);
+
+out_err:
+	dev_err(&adapter->pdev->dev, "firmware init failed\n");
+	return -EIO;
+}
+
+static int
+qlcnic_receive_peg_ready(struct qlcnic_adapter *adapter)
+{
+	u32 val;
+	int retries = 2000;
+
+	do {
+		val = QLCRD32(adapter, CRB_RCVPEG_STATE);
+
+		if (val == PHAN_PEG_RCV_INITIALIZED)
+			return 0;
+
+		msleep(10);
+
+	} while (--retries);
+
+	if (!retries) {
+		dev_err(&adapter->pdev->dev, "Receive Peg initialization not "
+			      "complete, state: 0x%x.\n", val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+int qlcnic_init_firmware(struct qlcnic_adapter *adapter)
+{
+	int err;
+
+	err = qlcnic_receive_peg_ready(adapter);
+	if (err)
+		return err;
+
+	QLCWR32(adapter, CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
+	QLCWR32(adapter, CRB_NIC_MSI_MODE_HOST, MSI_MODE_MULTIFUNC);
+	QLCWR32(adapter, CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
+	QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
+
+	return err;
+}
+
+static void
+qlcnic_handle_linkevent(struct qlcnic_adapter *adapter,
+				struct qlcnic_fw_msg *msg)
+{
+	u32 cable_OUI;
+	u16 cable_len;
+	u16 link_speed;
+	u8  link_status, module, duplex, autoneg;
+	struct net_device *netdev = adapter->netdev;
+
+	adapter->has_link_events = 1;
+
+	cable_OUI = msg->body[1] & 0xffffffff;
+	cable_len = (msg->body[1] >> 32) & 0xffff;
+	link_speed = (msg->body[1] >> 48) & 0xffff;
+
+	link_status = msg->body[2] & 0xff;
+	duplex = (msg->body[2] >> 16) & 0xff;
+	autoneg = (msg->body[2] >> 24) & 0xff;
+
+	module = (msg->body[2] >> 8) & 0xff;
+	if (module == LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE)
+		dev_info(&netdev->dev, "unsupported cable: OUI 0x%x, "
+				"length %d\n", cable_OUI, cable_len);
+	else if (module == LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN)
+		dev_info(&netdev->dev, "unsupported cable length %d\n",
+				cable_len);
+
+	qlcnic_advert_link_change(adapter, link_status);
+
+	if (duplex == LINKEVENT_FULL_DUPLEX)
+		adapter->link_duplex = DUPLEX_FULL;
+	else
+		adapter->link_duplex = DUPLEX_HALF;
+
+	adapter->module_type = module;
+	adapter->link_autoneg = autoneg;
+	adapter->link_speed = link_speed;
+}
+
+static void
+qlcnic_handle_fw_message(int desc_cnt, int index,
+		struct qlcnic_host_sds_ring *sds_ring)
+{
+	struct qlcnic_fw_msg msg;
+	struct status_desc *desc;
+	int i = 0, opcode;
+
+	while (desc_cnt > 0 && i < 8) {
+		desc = &sds_ring->desc_head[index];
+		msg.words[i++] = le64_to_cpu(desc->status_desc_data[0]);
+		msg.words[i++] = le64_to_cpu(desc->status_desc_data[1]);
+
+		index = get_next_index(index, sds_ring->num_desc);
+		desc_cnt--;
+	}
+
+	opcode = qlcnic_get_nic_msg_opcode(msg.body[0]);
+	switch (opcode) {
+	case QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE:
+		qlcnic_handle_linkevent(sds_ring->adapter, &msg);
+		break;
+	default:
+		break;
+	}
+}
+
+static int
+qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_rds_ring *rds_ring,
+		struct qlcnic_rx_buffer *buffer)
+{
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	struct pci_dev *pdev = adapter->pdev;
+
+	buffer->skb = dev_alloc_skb(rds_ring->skb_size);
+	if (!buffer->skb)
+		return -ENOMEM;
+
+	skb = buffer->skb;
+
+	if (!adapter->ahw.cut_through)
+		skb_reserve(skb, 2);
+
+	dma = pci_map_single(pdev, skb->data,
+			rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+
+	if (pci_dma_mapping_error(pdev, dma)) {
+		dev_kfree_skb_any(skb);
+		buffer->skb = NULL;
+		return -ENOMEM;
+	}
+
+	buffer->skb = skb;
+	buffer->dma = dma;
+	buffer->state = QLCNIC_BUFFER_BUSY;
+
+	return 0;
+}
+
+static struct sk_buff *qlcnic_process_rxbuf(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_rds_ring *rds_ring, u16 index, u16 cksum)
+{
+	struct qlcnic_rx_buffer *buffer;
+	struct sk_buff *skb;
+
+	buffer = &rds_ring->rx_buf_arr[index];
+
+	pci_unmap_single(adapter->pdev, buffer->dma, rds_ring->dma_size,
+			PCI_DMA_FROMDEVICE);
+
+	skb = buffer->skb;
+	if (!skb)
+		goto no_skb;
+
+	if (likely(adapter->rx_csum && cksum == STATUS_CKSUM_OK)) {
+		adapter->stats.csummed++;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+	} else {
+		skb->ip_summed = CHECKSUM_NONE;
+	}
+
+	skb->dev = adapter->netdev;
+
+	buffer->skb = NULL;
+no_skb:
+	buffer->state = QLCNIC_BUFFER_FREE;
+	return skb;
+}
+
+static struct qlcnic_rx_buffer *
+qlcnic_process_rcv(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_sds_ring *sds_ring,
+		int ring, u64 sts_data0)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_rx_buffer *buffer;
+	struct sk_buff *skb;
+	struct qlcnic_host_rds_ring *rds_ring;
+	int index, length, cksum, pkt_offset;
+
+	if (unlikely(ring >= adapter->max_rds_rings))
+		return NULL;
+
+	rds_ring = &recv_ctx->rds_rings[ring];
+
+	index = qlcnic_get_sts_refhandle(sts_data0);
+	if (unlikely(index >= rds_ring->num_desc))
+		return NULL;
+
+	buffer = &rds_ring->rx_buf_arr[index];
+
+	length = qlcnic_get_sts_totallength(sts_data0);
+	cksum  = qlcnic_get_sts_status(sts_data0);
+	pkt_offset = qlcnic_get_sts_pkt_offset(sts_data0);
+
+	skb = qlcnic_process_rxbuf(adapter, rds_ring, index, cksum);
+	if (!skb)
+		return buffer;
+
+	if (length > rds_ring->skb_size)
+		skb_put(skb, rds_ring->skb_size);
+	else
+		skb_put(skb, length);
+
+	if (pkt_offset)
+		skb_pull(skb, pkt_offset);
+
+	skb->truesize = skb->len + sizeof(struct sk_buff);
+	skb->protocol = eth_type_trans(skb, netdev);
+
+	napi_gro_receive(&sds_ring->napi, skb);
+
+	adapter->stats.rx_pkts++;
+	adapter->stats.rxbytes += length;
+
+	return buffer;
+}
+
+#define QLC_TCP_HDR_SIZE            20
+#define QLC_TCP_TS_OPTION_SIZE      12
+#define QLC_TCP_TS_HDR_SIZE         (QLC_TCP_HDR_SIZE + QLC_TCP_TS_OPTION_SIZE)
+
+static struct qlcnic_rx_buffer *
+qlcnic_process_lro(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_sds_ring *sds_ring,
+		int ring, u64 sts_data0, u64 sts_data1)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_rx_buffer *buffer;
+	struct sk_buff *skb;
+	struct qlcnic_host_rds_ring *rds_ring;
+	struct iphdr *iph;
+	struct tcphdr *th;
+	bool push, timestamp;
+	int l2_hdr_offset, l4_hdr_offset;
+	int index;
+	u16 lro_length, length, data_offset;
+	u32 seq_number;
+
+	if (unlikely(ring > adapter->max_rds_rings))
+		return NULL;
+
+	rds_ring = &recv_ctx->rds_rings[ring];
+
+	index = qlcnic_get_lro_sts_refhandle(sts_data0);
+	if (unlikely(index > rds_ring->num_desc))
+		return NULL;
+
+	buffer = &rds_ring->rx_buf_arr[index];
+
+	timestamp = qlcnic_get_lro_sts_timestamp(sts_data0);
+	lro_length = qlcnic_get_lro_sts_length(sts_data0);
+	l2_hdr_offset = qlcnic_get_lro_sts_l2_hdr_offset(sts_data0);
+	l4_hdr_offset = qlcnic_get_lro_sts_l4_hdr_offset(sts_data0);
+	push = qlcnic_get_lro_sts_push_flag(sts_data0);
+	seq_number = qlcnic_get_lro_sts_seq_number(sts_data1);
+
+	skb = qlcnic_process_rxbuf(adapter, rds_ring, index, STATUS_CKSUM_OK);
+	if (!skb)
+		return buffer;
+
+	if (timestamp)
+		data_offset = l4_hdr_offset + QLC_TCP_TS_HDR_SIZE;
+	else
+		data_offset = l4_hdr_offset + QLC_TCP_HDR_SIZE;
+
+	skb_put(skb, lro_length + data_offset);
+
+	skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb);
+
+	skb_pull(skb, l2_hdr_offset);
+	skb->protocol = eth_type_trans(skb, netdev);
+
+	iph = (struct iphdr *)skb->data;
+	th = (struct tcphdr *)(skb->data + (iph->ihl << 2));
+
+	length = (iph->ihl << 2) + (th->doff << 2) + lro_length;
+	iph->tot_len = htons(length);
+	iph->check = 0;
+	iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
+	th->psh = push;
+	th->seq = htonl(seq_number);
+
+	length = skb->len;
+
+	netif_receive_skb(skb);
+
+	adapter->stats.lro_pkts++;
+	adapter->stats.rxbytes += length;
+
+	return buffer;
+}
+
+int
+qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max)
+{
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+	struct list_head *cur;
+	struct status_desc *desc;
+	struct qlcnic_rx_buffer *rxbuf;
+	u64 sts_data0, sts_data1;
+
+	int count = 0;
+	int opcode, ring, desc_cnt;
+	u32 consumer = sds_ring->consumer;
+
+	while (count < max) {
+		desc = &sds_ring->desc_head[consumer];
+		sts_data0 = le64_to_cpu(desc->status_desc_data[0]);
+
+		if (!(sts_data0 & STATUS_OWNER_HOST))
+			break;
+
+		desc_cnt = qlcnic_get_sts_desc_cnt(sts_data0);
+		opcode = qlcnic_get_sts_opcode(sts_data0);
+
+		switch (opcode) {
+		case QLCNIC_RXPKT_DESC:
+		case QLCNIC_OLD_RXPKT_DESC:
+		case QLCNIC_SYN_OFFLOAD:
+			ring = qlcnic_get_sts_type(sts_data0);
+			rxbuf = qlcnic_process_rcv(adapter, sds_ring,
+					ring, sts_data0);
+			break;
+		case QLCNIC_LRO_DESC:
+			ring = qlcnic_get_lro_sts_type(sts_data0);
+			sts_data1 = le64_to_cpu(desc->status_desc_data[1]);
+			rxbuf = qlcnic_process_lro(adapter, sds_ring,
+					ring, sts_data0, sts_data1);
+			break;
+		case QLCNIC_RESPONSE_DESC:
+			qlcnic_handle_fw_message(desc_cnt, consumer, sds_ring);
+		default:
+			goto skip;
+		}
+
+		WARN_ON(desc_cnt > 1);
+
+		if (rxbuf)
+			list_add_tail(&rxbuf->list, &sds_ring->free_list[ring]);
+
+skip:
+		for (; desc_cnt > 0; desc_cnt--) {
+			desc = &sds_ring->desc_head[consumer];
+			desc->status_desc_data[0] =
+				cpu_to_le64(STATUS_OWNER_PHANTOM);
+			consumer = get_next_index(consumer, sds_ring->num_desc);
+		}
+		count++;
+	}
+
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		struct qlcnic_host_rds_ring *rds_ring =
+			&adapter->recv_ctx.rds_rings[ring];
+
+		if (!list_empty(&sds_ring->free_list[ring])) {
+			list_for_each(cur, &sds_ring->free_list[ring]) {
+				rxbuf = list_entry(cur,
+						struct qlcnic_rx_buffer, list);
+				qlcnic_alloc_rx_skb(adapter, rds_ring, rxbuf);
+			}
+			spin_lock(&rds_ring->lock);
+			list_splice_tail_init(&sds_ring->free_list[ring],
+						&rds_ring->free_list);
+			spin_unlock(&rds_ring->lock);
+		}
+
+		qlcnic_post_rx_buffers_nodb(adapter, rds_ring);
+	}
+
+	if (count) {
+		sds_ring->consumer = consumer;
+		writel(consumer, sds_ring->crb_sts_consumer);
+	}
+
+	return count;
+}
+
+void
+qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+	struct qlcnic_host_rds_ring *rds_ring)
+{
+	struct rcv_desc *pdesc;
+	struct qlcnic_rx_buffer *buffer;
+	int producer, count = 0;
+	struct list_head *head;
+
+	producer = rds_ring->producer;
+
+	spin_lock(&rds_ring->lock);
+	head = &rds_ring->free_list;
+	while (!list_empty(head)) {
+
+		buffer = list_entry(head->next, struct qlcnic_rx_buffer, list);
+
+		if (!buffer->skb) {
+			if (qlcnic_alloc_rx_skb(adapter, rds_ring, buffer))
+				break;
+		}
+
+		count++;
+		list_del(&buffer->list);
+
+		/* make a rcv descriptor  */
+		pdesc = &rds_ring->desc_head[producer];
+		pdesc->addr_buffer = cpu_to_le64(buffer->dma);
+		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
+		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
+
+		producer = get_next_index(producer, rds_ring->num_desc);
+	}
+	spin_unlock(&rds_ring->lock);
+
+	if (count) {
+		rds_ring->producer = producer;
+		writel((producer-1) & (rds_ring->num_desc-1),
+				rds_ring->crb_rcv_producer);
+	}
+}
+
+static void
+qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_rds_ring *rds_ring)
+{
+	struct rcv_desc *pdesc;
+	struct qlcnic_rx_buffer *buffer;
+	int producer, count = 0;
+	struct list_head *head;
+
+	producer = rds_ring->producer;
+	if (!spin_trylock(&rds_ring->lock))
+		return;
+
+	head = &rds_ring->free_list;
+	while (!list_empty(head)) {
+
+		buffer = list_entry(head->next, struct qlcnic_rx_buffer, list);
+
+		if (!buffer->skb) {
+			if (qlcnic_alloc_rx_skb(adapter, rds_ring, buffer))
+				break;
+		}
+
+		count++;
+		list_del(&buffer->list);
+
+		/* make a rcv descriptor  */
+		pdesc = &rds_ring->desc_head[producer];
+		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
+		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
+		pdesc->addr_buffer = cpu_to_le64(buffer->dma);
+
+		producer = get_next_index(producer, rds_ring->num_desc);
+	}
+
+	if (count) {
+		rds_ring->producer = producer;
+		writel((producer - 1) & (rds_ring->num_desc - 1),
+				rds_ring->crb_rcv_producer);
+	}
+	spin_unlock(&rds_ring->lock);
+}
+
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
new file mode 100644
index 000000000000..1698b6a68ed1
--- /dev/null
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -0,0 +1,2604 @@
+/*
+ * Copyright (C) 2009 - QLogic Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called "COPYING".
+ *
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+
+#include "qlcnic.h"
+
+#include <linux/dma-mapping.h>
+#include <linux/if_vlan.h>
+#include <net/ip.h>
+#include <linux/ipv6.h>
+#include <linux/inetdevice.h>
+#include <linux/sysfs.h>
+
+MODULE_DESCRIPTION("QLogic 10 GbE Converged Ethernet Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(QLCNIC_LINUX_VERSIONID);
+MODULE_FIRMWARE(QLCNIC_UNIFIED_ROMIMAGE_NAME);
+
+char qlcnic_driver_name[] = "qlcnic";
+static const char qlcnic_driver_string[] = "QLogic Converged Ethernet Driver v"
+    QLCNIC_LINUX_VERSIONID;
+
+static int port_mode = QLCNIC_PORT_MODE_AUTO_NEG;
+
+/* Default to restricted 1G auto-neg mode */
+static int wol_port_mode = 5;
+
+static int use_msi = 1;
+module_param(use_msi, int, 0644);
+MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
+
+static int use_msi_x = 1;
+module_param(use_msi_x, int, 0644);
+MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
+
+static int auto_fw_reset = AUTO_FW_RESET_ENABLED;
+module_param(auto_fw_reset, int, 0644);
+MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
+
+static int __devinit qlcnic_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent);
+static void __devexit qlcnic_remove(struct pci_dev *pdev);
+static int qlcnic_open(struct net_device *netdev);
+static int qlcnic_close(struct net_device *netdev);
+static netdev_tx_t qlcnic_xmit_frame(struct sk_buff *,
+					       struct net_device *);
+static void qlcnic_tx_timeout(struct net_device *netdev);
+static void qlcnic_tx_timeout_task(struct work_struct *work);
+static void qlcnic_attach_work(struct work_struct *work);
+static void qlcnic_fwinit_work(struct work_struct *work);
+static void qlcnic_fw_poll_work(struct work_struct *work);
+static void qlcnic_schedule_work(struct qlcnic_adapter *adapter,
+		work_func_t func, int delay);
+static void qlcnic_cancel_fw_work(struct qlcnic_adapter *adapter);
+static int qlcnic_poll(struct napi_struct *napi, int budget);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void qlcnic_poll_controller(struct net_device *netdev);
+#endif
+
+static void qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter);
+static void qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter);
+static void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter);
+static void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter);
+
+static void qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter);
+static int qlcnic_can_start_firmware(struct qlcnic_adapter *adapter);
+
+static irqreturn_t qlcnic_intr(int irq, void *data);
+static irqreturn_t qlcnic_msi_intr(int irq, void *data);
+static irqreturn_t qlcnic_msix_intr(int irq, void *data);
+
+static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev);
+static void qlcnic_config_indev_addr(struct net_device *dev, unsigned long);
+
+/*  PCI Device ID Table  */
+#define ENTRY(device) \
+	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \
+	.class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0}
+
+#define PCI_DEVICE_ID_QLOGIC_QLE824X  0x8020
+
+static const struct pci_device_id qlcnic_pci_tbl[] __devinitdata = {
+	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE824X),
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, qlcnic_pci_tbl);
+
+
+void
+qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_tx_ring *tx_ring)
+{
+	writel(tx_ring->producer, tx_ring->crb_cmd_producer);
+
+	if (qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH) {
+		netif_stop_queue(adapter->netdev);
+		smp_mb();
+	}
+}
+
+static const u32 msi_tgt_status[8] = {
+	ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
+	ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3,
+	ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5,
+	ISR_INT_TARGET_STATUS_F6, ISR_INT_TARGET_STATUS_F7
+};
+
+static const
+struct qlcnic_legacy_intr_set legacy_intr[] = QLCNIC_LEGACY_INTR_CONFIG;
+
+static inline void qlcnic_disable_int(struct qlcnic_host_sds_ring *sds_ring)
+{
+	writel(0, sds_ring->crb_intr_mask);
+}
+
+static inline void qlcnic_enable_int(struct qlcnic_host_sds_ring *sds_ring)
+{
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+
+	writel(0x1, sds_ring->crb_intr_mask);
+
+	if (!QLCNIC_IS_MSI_FAMILY(adapter))
+		writel(0xfbff, adapter->tgt_mask_reg);
+}
+
+static int
+qlcnic_alloc_sds_rings(struct qlcnic_recv_context *recv_ctx, int count)
+{
+	int size = sizeof(struct qlcnic_host_sds_ring) * count;
+
+	recv_ctx->sds_rings = kzalloc(size, GFP_KERNEL);
+
+	return (recv_ctx->sds_rings == NULL);
+}
+
+static void
+qlcnic_free_sds_rings(struct qlcnic_recv_context *recv_ctx)
+{
+	if (recv_ctx->sds_rings != NULL)
+		kfree(recv_ctx->sds_rings);
+
+	recv_ctx->sds_rings = NULL;
+}
+
+static int
+qlcnic_napi_add(struct qlcnic_adapter *adapter, struct net_device *netdev)
+{
+	int ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	if (qlcnic_alloc_sds_rings(recv_ctx, adapter->max_sds_rings))
+		return -ENOMEM;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		netif_napi_add(netdev, &sds_ring->napi,
+				qlcnic_poll, QLCNIC_NETDEV_WEIGHT);
+	}
+
+	return 0;
+}
+
+static void
+qlcnic_napi_del(struct qlcnic_adapter *adapter)
+{
+	int ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		netif_napi_del(&sds_ring->napi);
+	}
+
+	qlcnic_free_sds_rings(&adapter->recv_ctx);
+}
+
+static void
+qlcnic_napi_enable(struct qlcnic_adapter *adapter)
+{
+	int ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		napi_enable(&sds_ring->napi);
+		qlcnic_enable_int(sds_ring);
+	}
+}
+
+static void
+qlcnic_napi_disable(struct qlcnic_adapter *adapter)
+{
+	int ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		qlcnic_disable_int(sds_ring);
+		napi_synchronize(&sds_ring->napi);
+		napi_disable(&sds_ring->napi);
+	}
+}
+
+static void qlcnic_clear_stats(struct qlcnic_adapter *adapter)
+{
+	memset(&adapter->stats, 0, sizeof(adapter->stats));
+	return;
+}
+
+static int qlcnic_set_dma_mask(struct qlcnic_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	u64 mask, cmask;
+
+	adapter->pci_using_dac = 0;
+
+	mask = DMA_BIT_MASK(39);
+	cmask = mask;
+
+	if (pci_set_dma_mask(pdev, mask) == 0 &&
+			pci_set_consistent_dma_mask(pdev, cmask) == 0) {
+		adapter->pci_using_dac = 1;
+		return 0;
+	}
+
+	return -EIO;
+}
+
+/* Update addressable range if firmware supports it */
+static int
+qlcnic_update_dma_mask(struct qlcnic_adapter *adapter)
+{
+	int change, shift, err;
+	u64 mask, old_mask, old_cmask;
+	struct pci_dev *pdev = adapter->pdev;
+
+	change = 0;
+
+	shift = QLCRD32(adapter, CRB_DMA_SHIFT);
+	if (shift > 32)
+		return 0;
+
+	if (shift > 9)
+		change = 1;
+
+	if (change) {
+		old_mask = pdev->dma_mask;
+		old_cmask = pdev->dev.coherent_dma_mask;
+
+		mask = DMA_BIT_MASK(32+shift);
+
+		err = pci_set_dma_mask(pdev, mask);
+		if (err)
+			goto err_out;
+
+		err = pci_set_consistent_dma_mask(pdev, mask);
+		if (err)
+			goto err_out;
+		dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
+	}
+
+	return 0;
+
+err_out:
+	pci_set_dma_mask(pdev, old_mask);
+	pci_set_consistent_dma_mask(pdev, old_cmask);
+	return err;
+}
+
+static void qlcnic_set_port_mode(struct qlcnic_adapter *adapter)
+{
+	u32 val, data;
+
+	val = adapter->ahw.board_type;
+	if ((val == QLCNIC_BRDTYPE_P3_HMEZ) ||
+		(val == QLCNIC_BRDTYPE_P3_XG_LOM)) {
+		if (port_mode == QLCNIC_PORT_MODE_802_3_AP) {
+			data = QLCNIC_PORT_MODE_802_3_AP;
+			QLCWR32(adapter, QLCNIC_PORT_MODE_ADDR, data);
+		} else if (port_mode == QLCNIC_PORT_MODE_XG) {
+			data = QLCNIC_PORT_MODE_XG;
+			QLCWR32(adapter, QLCNIC_PORT_MODE_ADDR, data);
+		} else if (port_mode == QLCNIC_PORT_MODE_AUTO_NEG_1G) {
+			data = QLCNIC_PORT_MODE_AUTO_NEG_1G;
+			QLCWR32(adapter, QLCNIC_PORT_MODE_ADDR, data);
+		} else if (port_mode == QLCNIC_PORT_MODE_AUTO_NEG_XG) {
+			data = QLCNIC_PORT_MODE_AUTO_NEG_XG;
+			QLCWR32(adapter, QLCNIC_PORT_MODE_ADDR, data);
+		} else {
+			data = QLCNIC_PORT_MODE_AUTO_NEG;
+			QLCWR32(adapter, QLCNIC_PORT_MODE_ADDR, data);
+		}
+
+		if ((wol_port_mode != QLCNIC_PORT_MODE_802_3_AP) &&
+			(wol_port_mode != QLCNIC_PORT_MODE_XG) &&
+			(wol_port_mode != QLCNIC_PORT_MODE_AUTO_NEG_1G) &&
+			(wol_port_mode != QLCNIC_PORT_MODE_AUTO_NEG_XG)) {
+			wol_port_mode = QLCNIC_PORT_MODE_AUTO_NEG;
+		}
+		QLCWR32(adapter, QLCNIC_WOL_PORT_MODE, wol_port_mode);
+	}
+}
+
+static void qlcnic_set_msix_bit(struct pci_dev *pdev, int enable)
+{
+	u32 control;
+	int pos;
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+	if (pos) {
+		pci_read_config_dword(pdev, pos, &control);
+		if (enable)
+			control |= PCI_MSIX_FLAGS_ENABLE;
+		else
+			control = 0;
+		pci_write_config_dword(pdev, pos, control);
+	}
+}
+
+static void qlcnic_init_msix_entries(struct qlcnic_adapter *adapter, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		adapter->msix_entries[i].entry = i;
+}
+
+static int
+qlcnic_read_mac_addr(struct qlcnic_adapter *adapter)
+{
+	int i;
+	unsigned char *p;
+	u64 mac_addr;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if (qlcnic_get_mac_addr(adapter, &mac_addr) != 0)
+		return -EIO;
+
+	p = (unsigned char *)&mac_addr;
+	for (i = 0; i < 6; i++)
+		netdev->dev_addr[i] = *(p + 5 - i);
+
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+	memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len);
+
+	/* set station address */
+
+	if (!is_valid_ether_addr(netdev->perm_addr))
+		dev_warn(&pdev->dev, "Bad MAC address %pM.\n",
+					netdev->dev_addr);
+
+	return 0;
+}
+
+static int qlcnic_set_mac(struct net_device *netdev, void *p)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	if (netif_running(netdev)) {
+		netif_device_detach(netdev);
+		qlcnic_napi_disable(adapter);
+	}
+
+	memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len);
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	qlcnic_set_multi(adapter->netdev);
+
+	if (netif_running(netdev)) {
+		netif_device_attach(netdev);
+		qlcnic_napi_enable(adapter);
+	}
+	return 0;
+}
+
+static const struct net_device_ops qlcnic_netdev_ops = {
+	.ndo_open	   = qlcnic_open,
+	.ndo_stop	   = qlcnic_close,
+	.ndo_start_xmit    = qlcnic_xmit_frame,
+	.ndo_get_stats	   = qlcnic_get_stats,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_set_multicast_list = qlcnic_set_multi,
+	.ndo_set_mac_address    = qlcnic_set_mac,
+	.ndo_change_mtu	   = qlcnic_change_mtu,
+	.ndo_tx_timeout	   = qlcnic_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = qlcnic_poll_controller,
+#endif
+};
+
+static void
+qlcnic_setup_intr(struct qlcnic_adapter *adapter)
+{
+	const struct qlcnic_legacy_intr_set *legacy_intrp;
+	struct pci_dev *pdev = adapter->pdev;
+	int err, num_msix;
+
+	if (adapter->rss_supported) {
+		num_msix = (num_online_cpus() >= MSIX_ENTRIES_PER_ADAPTER) ?
+			MSIX_ENTRIES_PER_ADAPTER : 2;
+	} else
+		num_msix = 1;
+
+	adapter->max_sds_rings = 1;
+
+	adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);
+
+	legacy_intrp = &legacy_intr[adapter->ahw.pci_func];
+
+	adapter->int_vec_bit = legacy_intrp->int_vec_bit;
+	adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
+			legacy_intrp->tgt_status_reg);
+	adapter->tgt_mask_reg = qlcnic_get_ioaddr(adapter,
+			legacy_intrp->tgt_mask_reg);
+	adapter->isr_int_vec = qlcnic_get_ioaddr(adapter, ISR_INT_VECTOR);
+
+	adapter->crb_int_state_reg = qlcnic_get_ioaddr(adapter,
+			ISR_INT_STATE_REG);
+
+	qlcnic_set_msix_bit(pdev, 0);
+
+	if (adapter->msix_supported) {
+
+		qlcnic_init_msix_entries(adapter, num_msix);
+		err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
+		if (err == 0) {
+			adapter->flags |= QLCNIC_MSIX_ENABLED;
+			qlcnic_set_msix_bit(pdev, 1);
+
+			if (adapter->rss_supported)
+				adapter->max_sds_rings = num_msix;
+
+			dev_info(&pdev->dev, "using msi-x interrupts\n");
+			return;
+		}
+
+		if (err > 0)
+			pci_disable_msix(pdev);
+
+		/* fall through for msi */
+	}
+
+	if (use_msi && !pci_enable_msi(pdev)) {
+		adapter->flags |= QLCNIC_MSI_ENABLED;
+		adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
+				msi_tgt_status[adapter->ahw.pci_func]);
+		dev_info(&pdev->dev, "using msi interrupts\n");
+		adapter->msix_entries[0].vector = pdev->irq;
+		return;
+	}
+
+	dev_info(&pdev->dev, "using legacy interrupts\n");
+	adapter->msix_entries[0].vector = pdev->irq;
+}
+
+static void
+qlcnic_teardown_intr(struct qlcnic_adapter *adapter)
+{
+	if (adapter->flags & QLCNIC_MSIX_ENABLED)
+		pci_disable_msix(adapter->pdev);
+	if (adapter->flags & QLCNIC_MSI_ENABLED)
+		pci_disable_msi(adapter->pdev);
+}
+
+static void
+qlcnic_cleanup_pci_map(struct qlcnic_adapter *adapter)
+{
+	if (adapter->ahw.pci_base0 != NULL)
+		iounmap(adapter->ahw.pci_base0);
+}
+
+static int
+qlcnic_setup_pci_map(struct qlcnic_adapter *adapter)
+{
+	void __iomem *mem_ptr0 = NULL;
+	resource_size_t mem_base;
+	unsigned long mem_len, pci_len0 = 0;
+
+	struct pci_dev *pdev = adapter->pdev;
+	int pci_func = adapter->ahw.pci_func;
+
+	/*
+	 * Set the CRB window to invalid. If any register in window 0 is
+	 * accessed it should set the window to 0 and then reset it to 1.
+	 */
+	adapter->ahw.crb_win = -1;
+	adapter->ahw.ocm_win = -1;
+
+	/* remap phys address */
+	mem_base = pci_resource_start(pdev, 0);	/* 0 is for BAR 0 */
+	mem_len = pci_resource_len(pdev, 0);
+
+	if (mem_len == QLCNIC_PCI_2MB_SIZE) {
+
+		mem_ptr0 = pci_ioremap_bar(pdev, 0);
+		if (mem_ptr0 == NULL) {
+			dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+			return -EIO;
+		}
+		pci_len0 = mem_len;
+	} else {
+		return -EIO;
+	}
+
+	dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
+
+	adapter->ahw.pci_base0 = mem_ptr0;
+	adapter->ahw.pci_len0 = pci_len0;
+
+	adapter->ahw.ocm_win_crb = qlcnic_get_ioaddr(adapter,
+		QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(pci_func)));
+
+	return 0;
+}
+
+static void get_brd_name(struct qlcnic_adapter *adapter, char *name)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int i, found = 0;
+
+	for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) {
+		if (qlcnic_boards[i].vendor == pdev->vendor &&
+			qlcnic_boards[i].device == pdev->device &&
+			qlcnic_boards[i].sub_vendor == pdev->subsystem_vendor &&
+			qlcnic_boards[i].sub_device == pdev->subsystem_device) {
+				strcpy(name, qlcnic_boards[i].short_name);
+				found = 1;
+				break;
+		}
+
+	}
+
+	if (!found)
+		name = "Unknown";
+}
+
+static void
+qlcnic_check_options(struct qlcnic_adapter *adapter)
+{
+	u32 fw_major, fw_minor, fw_build;
+	char brd_name[QLCNIC_MAX_BOARD_NAME_LEN];
+	char serial_num[32];
+	int i, offset, val;
+	int *ptr32;
+	struct pci_dev *pdev = adapter->pdev;
+
+	adapter->driver_mismatch = 0;
+
+	ptr32 = (int *)&serial_num;
+	offset = QLCNIC_FW_SERIAL_NUM_OFFSET;
+	for (i = 0; i < 8; i++) {
+		if (qlcnic_rom_fast_read(adapter, offset, &val) == -1) {
+			dev_err(&pdev->dev, "error reading board info\n");
+			adapter->driver_mismatch = 1;
+			return;
+		}
+		ptr32[i] = cpu_to_le32(val);
+		offset += sizeof(u32);
+	}
+
+	fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR);
+	fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR);
+	fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB);
+
+	adapter->fw_version = QLCNIC_VERSION_CODE(fw_major, fw_minor, fw_build);
+
+	if (adapter->portnum == 0) {
+		get_brd_name(adapter, brd_name);
+
+		pr_info("%s: %s Board Chip rev 0x%x\n",
+				module_name(THIS_MODULE),
+				brd_name, adapter->ahw.revision_id);
+	}
+
+	if (adapter->fw_version < QLCNIC_VERSION_CODE(3, 4, 216)) {
+		adapter->driver_mismatch = 1;
+		dev_warn(&pdev->dev, "firmware version %d.%d.%d unsupported\n",
+				fw_major, fw_minor, fw_build);
+		return;
+	}
+
+	i = QLCRD32(adapter, QLCNIC_SRE_MISC);
+	adapter->ahw.cut_through = (i & 0x8000) ? 1 : 0;
+
+	dev_info(&pdev->dev, "firmware v%d.%d.%d [%s]\n",
+			fw_major, fw_minor, fw_build,
+			adapter->ahw.cut_through ? "cut-through" : "legacy");
+
+	if (adapter->fw_version >= QLCNIC_VERSION_CODE(4, 0, 222))
+		adapter->capabilities = QLCRD32(adapter, CRB_FW_CAPABILITIES_1);
+
+	adapter->flags &= ~QLCNIC_LRO_ENABLED;
+
+	if (adapter->ahw.port_type == QLCNIC_XGBE) {
+		adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
+		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+	} else if (adapter->ahw.port_type == QLCNIC_GBE) {
+		adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
+		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+	}
+
+	adapter->msix_supported = !!use_msi_x;
+	adapter->rss_supported = !!use_msi_x;
+
+	adapter->num_txd = MAX_CMD_DESCRIPTORS;
+
+	adapter->num_lro_rxd = 0;
+	adapter->max_rds_rings = 2;
+}
+
+static int
+qlcnic_start_firmware(struct qlcnic_adapter *adapter)
+{
+	int val, err, first_boot;
+
+	err = qlcnic_set_dma_mask(adapter);
+	if (err)
+		return err;
+
+	if (!qlcnic_can_start_firmware(adapter))
+		goto wait_init;
+
+	first_boot = QLCRD32(adapter, QLCNIC_CAM_RAM(0x1fc));
+	if (first_boot == 0x55555555)
+		/* This is the first boot after power up */
+		QLCWR32(adapter, QLCNIC_CAM_RAM(0x1fc), QLCNIC_BDINFO_MAGIC);
+
+	qlcnic_request_firmware(adapter);
+
+	err = qlcnic_need_fw_reset(adapter);
+	if (err < 0)
+		goto err_out;
+	if (err == 0)
+		goto wait_init;
+
+	if (first_boot != 0x55555555) {
+		QLCWR32(adapter, CRB_CMDPEG_STATE, 0);
+		qlcnic_pinit_from_rom(adapter);
+		msleep(1);
+	}
+
+	QLCWR32(adapter, CRB_DMA_SHIFT, 0x55555555);
+	QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
+	QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
+
+	qlcnic_set_port_mode(adapter);
+
+	err = qlcnic_load_firmware(adapter);
+	if (err)
+		goto err_out;
+
+	qlcnic_release_firmware(adapter);
+
+	val = (_QLCNIC_LINUX_MAJOR << 16)
+		| ((_QLCNIC_LINUX_MINOR << 8))
+		| (_QLCNIC_LINUX_SUBVERSION);
+	QLCWR32(adapter, CRB_DRIVER_VERSION, val);
+
+wait_init:
+	/* Handshake with the card before we register the devices. */
+	err = qlcnic_phantom_init(adapter);
+	if (err)
+		goto err_out;
+
+	QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY);
+
+	qlcnic_update_dma_mask(adapter);
+
+	qlcnic_check_options(adapter);
+
+	adapter->need_fw_reset = 0;
+
+	/* fall through and release firmware */
+
+err_out:
+	qlcnic_release_firmware(adapter);
+	return err;
+}
+
+static int
+qlcnic_request_irq(struct qlcnic_adapter *adapter)
+{
+	irq_handler_t handler;
+	struct qlcnic_host_sds_ring *sds_ring;
+	int err, ring;
+
+	unsigned long flags = 0;
+	struct net_device *netdev = adapter->netdev;
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	if (adapter->flags & QLCNIC_MSIX_ENABLED)
+		handler = qlcnic_msix_intr;
+	else if (adapter->flags & QLCNIC_MSI_ENABLED)
+		handler = qlcnic_msi_intr;
+	else {
+		flags |= IRQF_SHARED;
+		handler = qlcnic_intr;
+	}
+	adapter->irq = netdev->irq;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		sprintf(sds_ring->name, "%s[%d]", netdev->name, ring);
+		err = request_irq(sds_ring->irq, handler,
+				  flags, sds_ring->name, sds_ring);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static void
+qlcnic_free_irq(struct qlcnic_adapter *adapter)
+{
+	int ring;
+	struct qlcnic_host_sds_ring *sds_ring;
+
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+		free_irq(sds_ring->irq, sds_ring);
+	}
+}
+
+static void
+qlcnic_init_coalesce_defaults(struct qlcnic_adapter *adapter)
+{
+	adapter->coal.flags = QLCNIC_INTR_DEFAULT;
+	adapter->coal.normal.data.rx_time_us =
+		QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
+	adapter->coal.normal.data.rx_packets =
+		QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
+	adapter->coal.normal.data.tx_time_us =
+		QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US;
+	adapter->coal.normal.data.tx_packets =
+		QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS;
+}
+
+static int
+__qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
+{
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return -EIO;
+
+	qlcnic_set_multi(netdev);
+	qlcnic_fw_cmd_set_mtu(adapter, netdev->mtu);
+
+	adapter->ahw.linkup = 0;
+
+	if (adapter->max_sds_rings > 1)
+		qlcnic_config_rss(adapter, 1);
+
+	qlcnic_config_intr_coalesce(adapter);
+
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
+		qlcnic_config_hw_lro(adapter, QLCNIC_LRO_ENABLED);
+
+	qlcnic_napi_enable(adapter);
+
+	qlcnic_linkevent_request(adapter, 1);
+
+	set_bit(__QLCNIC_DEV_UP, &adapter->state);
+	return 0;
+}
+
+/* Usage: During resume and firmware recovery module.*/
+
+static int
+qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
+{
+	int err = 0;
+
+	rtnl_lock();
+	if (netif_running(netdev))
+		err = __qlcnic_up(adapter, netdev);
+	rtnl_unlock();
+
+	return err;
+}
+
+static void
+__qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev)
+{
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return;
+
+	if (!test_and_clear_bit(__QLCNIC_DEV_UP, &adapter->state))
+		return;
+
+	smp_mb();
+	spin_lock(&adapter->tx_clean_lock);
+	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
+
+	qlcnic_free_mac_list(adapter);
+
+	qlcnic_nic_set_promisc(adapter, QLCNIC_NIU_NON_PROMISC_MODE);
+
+	qlcnic_napi_disable(adapter);
+
+	qlcnic_release_tx_buffers(adapter);
+	spin_unlock(&adapter->tx_clean_lock);
+}
+
+/* Usage: During suspend and firmware recovery module */
+
+static void
+qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev)
+{
+	rtnl_lock();
+	if (netif_running(netdev))
+		__qlcnic_down(adapter, netdev);
+	rtnl_unlock();
+
+}
+
+static int
+qlcnic_attach(struct qlcnic_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	int err, ring;
+	struct qlcnic_host_rds_ring *rds_ring;
+
+	if (adapter->is_up == QLCNIC_ADAPTER_UP_MAGIC)
+		return 0;
+
+	err = qlcnic_init_firmware(adapter);
+	if (err)
+		return err;
+
+	err = qlcnic_napi_add(adapter, netdev);
+	if (err)
+		return err;
+
+	err = qlcnic_alloc_sw_resources(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Error in setting sw resources\n");
+		return err;
+	}
+
+	err = qlcnic_alloc_hw_resources(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Error in setting hw resources\n");
+		goto err_out_free_sw;
+	}
+
+
+	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+		rds_ring = &adapter->recv_ctx.rds_rings[ring];
+		qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+	}
+
+	err = qlcnic_request_irq(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "failed to setup interrupt\n");
+		goto err_out_free_rxbuf;
+	}
+
+	qlcnic_init_coalesce_defaults(adapter);
+
+	qlcnic_create_sysfs_entries(adapter);
+
+	adapter->is_up = QLCNIC_ADAPTER_UP_MAGIC;
+	return 0;
+
+err_out_free_rxbuf:
+	qlcnic_release_rx_buffers(adapter);
+	qlcnic_free_hw_resources(adapter);
+err_out_free_sw:
+	qlcnic_free_sw_resources(adapter);
+	return err;
+}
+
+static void
+qlcnic_detach(struct qlcnic_adapter *adapter)
+{
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return;
+
+	qlcnic_remove_sysfs_entries(adapter);
+
+	qlcnic_free_hw_resources(adapter);
+	qlcnic_release_rx_buffers(adapter);
+	qlcnic_free_irq(adapter);
+	qlcnic_napi_del(adapter);
+	qlcnic_free_sw_resources(adapter);
+
+	adapter->is_up = 0;
+}
+
+int
+qlcnic_reset_context(struct qlcnic_adapter *adapter)
+{
+	int err = 0;
+	struct net_device *netdev = adapter->netdev;
+
+	if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		return -EBUSY;
+
+	if (adapter->is_up == QLCNIC_ADAPTER_UP_MAGIC) {
+
+		netif_device_detach(netdev);
+
+		if (netif_running(netdev))
+			__qlcnic_down(adapter, netdev);
+
+		qlcnic_detach(adapter);
+
+		if (netif_running(netdev)) {
+			err = qlcnic_attach(adapter);
+			if (!err)
+				err = __qlcnic_up(adapter, netdev);
+
+			if (err)
+				goto done;
+		}
+
+		netif_device_attach(netdev);
+	}
+
+done:
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	return err;
+}
+
+static int
+qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
+		struct net_device *netdev)
+{
+	int err;
+	struct pci_dev *pdev = adapter->pdev;
+
+	adapter->rx_csum = 1;
+	adapter->mc_enabled = 0;
+	adapter->max_mc_count = 38;
+
+	netdev->netdev_ops	   = &qlcnic_netdev_ops;
+	netdev->watchdog_timeo     = 2*HZ;
+
+	qlcnic_change_mtu(netdev, netdev->mtu);
+
+	SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops);
+
+	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->features |= (NETIF_F_GRO);
+	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
+	netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+	netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+
+	if (adapter->pci_using_dac) {
+		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
+
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_FVLANTX)
+		netdev->features |= (NETIF_F_HW_VLAN_TX);
+
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
+		netdev->features |= NETIF_F_LRO;
+
+	netdev->irq = adapter->msix_entries[0].vector;
+
+	INIT_WORK(&adapter->tx_timeout_task, qlcnic_tx_timeout_task);
+
+	if (qlcnic_read_mac_addr(adapter))
+		dev_warn(&pdev->dev, "failed to read mac addr\n");
+
+	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
+
+	err = register_netdev(netdev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register net device\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int __devinit
+qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *netdev = NULL;
+	struct qlcnic_adapter *adapter = NULL;
+	int err;
+	int pci_func_id = PCI_FUNC(pdev->devfn);
+	uint8_t revision_id;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		err = -ENODEV;
+		goto err_out_disable_pdev;
+	}
+
+	err = pci_request_regions(pdev, qlcnic_driver_name);
+	if (err)
+		goto err_out_disable_pdev;
+
+	pci_set_master(pdev);
+
+	netdev = alloc_etherdev(sizeof(struct qlcnic_adapter));
+	if (!netdev) {
+		dev_err(&pdev->dev, "failed to allocate net_device\n");
+		err = -ENOMEM;
+		goto err_out_free_res;
+	}
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	adapter = netdev_priv(netdev);
+	adapter->netdev  = netdev;
+	adapter->pdev    = pdev;
+	adapter->ahw.pci_func  = pci_func_id;
+
+	revision_id = pdev->revision;
+	adapter->ahw.revision_id = revision_id;
+
+	rwlock_init(&adapter->ahw.crb_lock);
+	mutex_init(&adapter->ahw.mem_lock);
+
+	spin_lock_init(&adapter->tx_clean_lock);
+	INIT_LIST_HEAD(&adapter->mac_list);
+
+	err = qlcnic_setup_pci_map(adapter);
+	if (err)
+		goto err_out_free_netdev;
+
+	/* This will be reset for mezz cards  */
+	adapter->portnum = pci_func_id;
+
+	err = qlcnic_get_board_info(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Error getting board config info.\n");
+		goto err_out_iounmap;
+	}
+
+
+	err = qlcnic_start_firmware(adapter);
+	if (err)
+		goto err_out_decr_ref;
+
+	/*
+	 * See if the firmware gave us a virtual-physical port mapping.
+	 */
+	adapter->physical_port = adapter->portnum;
+
+	qlcnic_clear_stats(adapter);
+
+	qlcnic_setup_intr(adapter);
+
+	err = qlcnic_setup_netdev(adapter, netdev);
+	if (err)
+		goto err_out_disable_msi;
+
+	pci_set_drvdata(pdev, adapter);
+
+	qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
+
+	switch (adapter->ahw.port_type) {
+	case QLCNIC_GBE:
+		dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
+				adapter->netdev->name);
+		break;
+	case QLCNIC_XGBE:
+		dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
+				adapter->netdev->name);
+		break;
+	}
+
+	qlcnic_create_diag_entries(adapter);
+
+	return 0;
+
+err_out_disable_msi:
+	qlcnic_teardown_intr(adapter);
+
+err_out_decr_ref:
+	qlcnic_clr_all_drv_state(adapter);
+
+err_out_iounmap:
+	qlcnic_cleanup_pci_map(adapter);
+
+err_out_free_netdev:
+	free_netdev(netdev);
+
+err_out_free_res:
+	pci_release_regions(pdev);
+
+err_out_disable_pdev:
+	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
+	return err;
+}
+
+static void __devexit qlcnic_remove(struct pci_dev *pdev)
+{
+	struct qlcnic_adapter *adapter;
+	struct net_device *netdev;
+
+	adapter = pci_get_drvdata(pdev);
+	if (adapter == NULL)
+		return;
+
+	netdev = adapter->netdev;
+
+	qlcnic_cancel_fw_work(adapter);
+
+	unregister_netdev(netdev);
+
+	cancel_work_sync(&adapter->tx_timeout_task);
+
+	qlcnic_detach(adapter);
+
+	qlcnic_clr_all_drv_state(adapter);
+
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+
+	qlcnic_teardown_intr(adapter);
+
+	qlcnic_remove_diag_entries(adapter);
+
+	qlcnic_cleanup_pci_map(adapter);
+
+	qlcnic_release_firmware(adapter);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	free_netdev(netdev);
+}
+static int __qlcnic_shutdown(struct pci_dev *pdev)
+{
+	struct qlcnic_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+	int retval;
+
+	netif_device_detach(netdev);
+
+	qlcnic_cancel_fw_work(adapter);
+
+	if (netif_running(netdev))
+		qlcnic_down(adapter, netdev);
+
+	cancel_work_sync(&adapter->tx_timeout_task);
+
+	qlcnic_detach(adapter);
+
+	qlcnic_clr_all_drv_state(adapter);
+
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+
+	if (qlcnic_wol_supported(adapter)) {
+		pci_enable_wake(pdev, PCI_D3cold, 1);
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+	}
+
+	return 0;
+}
+
+static void qlcnic_shutdown(struct pci_dev *pdev)
+{
+	if (__qlcnic_shutdown(pdev))
+		return;
+
+	pci_disable_device(pdev);
+}
+
+#ifdef CONFIG_PM
+static int
+qlcnic_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int retval;
+
+	retval = __qlcnic_shutdown(pdev);
+	if (retval)
+		return retval;
+
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int
+qlcnic_resume(struct pci_dev *pdev)
+{
+	struct qlcnic_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_set_master(pdev);
+	pci_restore_state(pdev);
+
+	adapter->ahw.crb_win = -1;
+	adapter->ahw.ocm_win = -1;
+
+	err = qlcnic_start_firmware(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "failed to start firmware\n");
+		return err;
+	}
+
+	if (netif_running(netdev)) {
+		err = qlcnic_attach(adapter);
+		if (err)
+			goto err_out;
+
+		err = qlcnic_up(adapter, netdev);
+		if (err)
+			goto err_out_detach;
+
+
+		qlcnic_config_indev_addr(netdev, NETDEV_UP);
+	}
+
+	netif_device_attach(netdev);
+	qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
+	return 0;
+
+err_out_detach:
+	qlcnic_detach(adapter);
+err_out:
+	qlcnic_clr_all_drv_state(adapter);
+	return err;
+}
+#endif
+
+static int qlcnic_open(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int err;
+
+	if (adapter->driver_mismatch)
+		return -EIO;
+
+	err = qlcnic_attach(adapter);
+	if (err)
+		return err;
+
+	err = __qlcnic_up(adapter, netdev);
+	if (err)
+		goto err_out;
+
+	netif_start_queue(netdev);
+
+	return 0;
+
+err_out:
+	qlcnic_detach(adapter);
+	return err;
+}
+
+/*
+ * qlcnic_close - Disables a network interface entry point
+ */
+static int qlcnic_close(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	__qlcnic_down(adapter, netdev);
+	return 0;
+}
+
+static void
+qlcnic_tso_check(struct net_device *netdev,
+		struct qlcnic_host_tx_ring *tx_ring,
+		struct cmd_desc_type0 *first_desc,
+		struct sk_buff *skb)
+{
+	u8 opcode = TX_ETHER_PKT;
+	__be16 protocol = skb->protocol;
+	u16 flags = 0, vid = 0;
+	u32 producer;
+	int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
+	struct cmd_desc_type0 *hwdesc;
+	struct vlan_ethhdr *vh;
+
+	if (protocol == cpu_to_be16(ETH_P_8021Q)) {
+
+		vh = (struct vlan_ethhdr *)skb->data;
+		protocol = vh->h_vlan_encapsulated_proto;
+		flags = FLAGS_VLAN_TAGGED;
+
+	} else if (vlan_tx_tag_present(skb)) {
+
+		flags = FLAGS_VLAN_OOB;
+		vid = vlan_tx_tag_get(skb);
+		qlcnic_set_tx_vlan_tci(first_desc, vid);
+		vlan_oob = 1;
+	}
+
+	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+			skb_shinfo(skb)->gso_size > 0) {
+
+		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+
+		first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+		first_desc->total_hdr_length = hdr_len;
+		if (vlan_oob) {
+			first_desc->total_hdr_length += VLAN_HLEN;
+			first_desc->tcp_hdr_offset = VLAN_HLEN;
+			first_desc->ip_hdr_offset = VLAN_HLEN;
+			/* Only in case of TSO on vlan device */
+			flags |= FLAGS_VLAN_TAGGED;
+		}
+
+		opcode = (protocol == cpu_to_be16(ETH_P_IPV6)) ?
+				TX_TCP_LSO6 : TX_TCP_LSO;
+		tso = 1;
+
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		u8 l4proto;
+
+		if (protocol == cpu_to_be16(ETH_P_IP)) {
+			l4proto = ip_hdr(skb)->protocol;
+
+			if (l4proto == IPPROTO_TCP)
+				opcode = TX_TCP_PKT;
+			else if (l4proto == IPPROTO_UDP)
+				opcode = TX_UDP_PKT;
+		} else if (protocol == cpu_to_be16(ETH_P_IPV6)) {
+			l4proto = ipv6_hdr(skb)->nexthdr;
+
+			if (l4proto == IPPROTO_TCP)
+				opcode = TX_TCPV6_PKT;
+			else if (l4proto == IPPROTO_UDP)
+				opcode = TX_UDPV6_PKT;
+		}
+	}
+
+	first_desc->tcp_hdr_offset += skb_transport_offset(skb);
+	first_desc->ip_hdr_offset += skb_network_offset(skb);
+	qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
+
+	if (!tso)
+		return;
+
+	/* For LSO, we need to copy the MAC/IP/TCP headers into
+	 * the descriptor ring
+	 */
+	producer = tx_ring->producer;
+	copied = 0;
+	offset = 2;
+
+	if (vlan_oob) {
+		/* Create a TSO vlan header template for firmware */
+
+		hwdesc = &tx_ring->desc_head[producer];
+		tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+		copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
+				hdr_len + VLAN_HLEN);
+
+		vh = (struct vlan_ethhdr *)((char *)hwdesc + 2);
+		skb_copy_from_linear_data(skb, vh, 12);
+		vh->h_vlan_proto = htons(ETH_P_8021Q);
+		vh->h_vlan_TCI = htons(vid);
+		skb_copy_from_linear_data_offset(skb, 12,
+				(char *)vh + 16, copy_len - 16);
+
+		copied = copy_len - VLAN_HLEN;
+		offset = 0;
+
+		producer = get_next_index(producer, tx_ring->num_desc);
+	}
+
+	while (copied < hdr_len) {
+
+		copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
+				(hdr_len - copied));
+
+		hwdesc = &tx_ring->desc_head[producer];
+		tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+		skb_copy_from_linear_data_offset(skb, copied,
+				 (char *)hwdesc + offset, copy_len);
+
+		copied += copy_len;
+		offset = 0;
+
+		producer = get_next_index(producer, tx_ring->num_desc);
+	}
+
+	tx_ring->producer = producer;
+	barrier();
+}
+
+static int
+qlcnic_map_tx_skb(struct pci_dev *pdev,
+		struct sk_buff *skb, struct qlcnic_cmd_buffer *pbuf)
+{
+	struct qlcnic_skb_frag *nf;
+	struct skb_frag_struct *frag;
+	int i, nr_frags;
+	dma_addr_t map;
+
+	nr_frags = skb_shinfo(skb)->nr_frags;
+	nf = &pbuf->frag_array[0];
+
+	map = pci_map_single(pdev, skb->data,
+			skb_headlen(skb), PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(pdev, map))
+		goto out_err;
+
+	nf->dma = map;
+	nf->length = skb_headlen(skb);
+
+	for (i = 0; i < nr_frags; i++) {
+		frag = &skb_shinfo(skb)->frags[i];
+		nf = &pbuf->frag_array[i+1];
+
+		map = pci_map_page(pdev, frag->page, frag->page_offset,
+				frag->size, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, map))
+			goto unwind;
+
+		nf->dma = map;
+		nf->length = frag->size;
+	}
+
+	return 0;
+
+unwind:
+	while (--i >= 0) {
+		nf = &pbuf->frag_array[i+1];
+		pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE);
+	}
+
+	nf = &pbuf->frag_array[0];
+	pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
+
+out_err:
+	return -ENOMEM;
+}
+
+static inline void
+qlcnic_clear_cmddesc(u64 *desc)
+{
+	desc[0] = 0ULL;
+	desc[2] = 0ULL;
+}
+
+static netdev_tx_t
+qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
+	struct qlcnic_cmd_buffer *pbuf;
+	struct qlcnic_skb_frag *buffrag;
+	struct cmd_desc_type0 *hwdesc, *first_desc;
+	struct pci_dev *pdev;
+	int i, k;
+
+	u32 producer;
+	int frag_count, no_of_desc;
+	u32 num_txd = tx_ring->num_desc;
+
+	frag_count = skb_shinfo(skb)->nr_frags + 1;
+
+	/* 4 fragments per cmd des */
+	no_of_desc = (frag_count + 3) >> 2;
+
+	if (unlikely(no_of_desc + 2 > qlcnic_tx_avail(tx_ring))) {
+		netif_stop_queue(netdev);
+		return NETDEV_TX_BUSY;
+	}
+
+	producer = tx_ring->producer;
+	pbuf = &tx_ring->cmd_buf_arr[producer];
+
+	pdev = adapter->pdev;
+
+	if (qlcnic_map_tx_skb(pdev, skb, pbuf))
+		goto drop_packet;
+
+	pbuf->skb = skb;
+	pbuf->frag_count = frag_count;
+
+	first_desc = hwdesc = &tx_ring->desc_head[producer];
+	qlcnic_clear_cmddesc((u64 *)hwdesc);
+
+	qlcnic_set_tx_frags_len(first_desc, frag_count, skb->len);
+	qlcnic_set_tx_port(first_desc, adapter->portnum);
+
+	for (i = 0; i < frag_count; i++) {
+
+		k = i % 4;
+
+		if ((k == 0) && (i > 0)) {
+			/* move to next desc.*/
+			producer = get_next_index(producer, num_txd);
+			hwdesc = &tx_ring->desc_head[producer];
+			qlcnic_clear_cmddesc((u64 *)hwdesc);
+			tx_ring->cmd_buf_arr[producer].skb = NULL;
+		}
+
+		buffrag = &pbuf->frag_array[i];
+
+		hwdesc->buffer_length[k] = cpu_to_le16(buffrag->length);
+		switch (k) {
+		case 0:
+			hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
+			break;
+		case 1:
+			hwdesc->addr_buffer2 = cpu_to_le64(buffrag->dma);
+			break;
+		case 2:
+			hwdesc->addr_buffer3 = cpu_to_le64(buffrag->dma);
+			break;
+		case 3:
+			hwdesc->addr_buffer4 = cpu_to_le64(buffrag->dma);
+			break;
+		}
+	}
+
+	tx_ring->producer = get_next_index(producer, num_txd);
+
+	qlcnic_tso_check(netdev, tx_ring, first_desc, skb);
+
+	qlcnic_update_cmd_producer(adapter, tx_ring);
+
+	adapter->stats.txbytes += skb->len;
+	adapter->stats.xmitcalled++;
+
+	return NETDEV_TX_OK;
+
+drop_packet:
+	adapter->stats.txdropped++;
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+static int qlcnic_check_temp(struct qlcnic_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	u32 temp, temp_state, temp_val;
+	int rv = 0;
+
+	temp = QLCRD32(adapter, CRB_TEMP_STATE);
+
+	temp_state = qlcnic_get_temp_state(temp);
+	temp_val = qlcnic_get_temp_val(temp);
+
+	if (temp_state == QLCNIC_TEMP_PANIC) {
+		dev_err(&netdev->dev,
+		       "Device temperature %d degrees C exceeds"
+		       " maximum allowed. Hardware has been shut down.\n",
+		       temp_val);
+		rv = 1;
+	} else if (temp_state == QLCNIC_TEMP_WARN) {
+		if (adapter->temp == QLCNIC_TEMP_NORMAL) {
+			dev_err(&netdev->dev,
+			       "Device temperature %d degrees C "
+			       "exceeds operating range."
+			       " Immediate action needed.\n",
+			       temp_val);
+		}
+	} else {
+		if (adapter->temp == QLCNIC_TEMP_WARN) {
+			dev_info(&netdev->dev,
+			       "Device temperature is now %d degrees C"
+			       " in normal range.\n", temp_val);
+		}
+	}
+	adapter->temp = temp_state;
+	return rv;
+}
+
+void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	if (adapter->ahw.linkup && !linkup) {
+		dev_info(&netdev->dev, "NIC Link is down\n");
+		adapter->ahw.linkup = 0;
+		if (netif_running(netdev)) {
+			netif_carrier_off(netdev);
+			netif_stop_queue(netdev);
+		}
+	} else if (!adapter->ahw.linkup && linkup) {
+		dev_info(&netdev->dev, "NIC Link is up\n");
+		adapter->ahw.linkup = 1;
+		if (netif_running(netdev)) {
+			netif_carrier_on(netdev);
+			netif_wake_queue(netdev);
+		}
+	}
+}
+
+static void qlcnic_tx_timeout(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	if (test_bit(__QLCNIC_RESETTING, &adapter->state))
+		return;
+
+	dev_err(&netdev->dev, "transmit timeout, resetting.\n");
+	schedule_work(&adapter->tx_timeout_task);
+}
+
+static void qlcnic_tx_timeout_task(struct work_struct *work)
+{
+	struct qlcnic_adapter *adapter =
+		container_of(work, struct qlcnic_adapter, tx_timeout_task);
+
+	if (!netif_running(adapter->netdev))
+		return;
+
+	if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		return;
+
+	if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS)
+		goto request_reset;
+
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	if (!qlcnic_reset_context(adapter)) {
+		adapter->netdev->trans_start = jiffies;
+		return;
+
+		/* context reset failed, fall through for fw reset */
+	}
+
+request_reset:
+	adapter->need_fw_reset = 1;
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+}
+
+static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct net_device_stats *stats = &netdev->stats;
+
+	memset(stats, 0, sizeof(*stats));
+
+	stats->rx_packets = adapter->stats.rx_pkts + adapter->stats.lro_pkts;
+	stats->tx_packets = adapter->stats.xmitfinished;
+	stats->rx_bytes = adapter->stats.rxbytes;
+	stats->tx_bytes = adapter->stats.txbytes;
+	stats->rx_dropped = adapter->stats.rxdropped;
+	stats->tx_dropped = adapter->stats.txdropped;
+
+	return stats;
+}
+
+static irqreturn_t qlcnic_intr(int irq, void *data)
+{
+	struct qlcnic_host_sds_ring *sds_ring = data;
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+	u32 status;
+
+	status = readl(adapter->isr_int_vec);
+
+	if (!(status & adapter->int_vec_bit))
+		return IRQ_NONE;
+
+	/* check interrupt state machine, to be sure */
+	status = readl(adapter->crb_int_state_reg);
+	if (!ISR_LEGACY_INT_TRIGGERED(status))
+		return IRQ_NONE;
+
+	writel(0xffffffff, adapter->tgt_status_reg);
+	/* read twice to ensure write is flushed */
+	readl(adapter->isr_int_vec);
+	readl(adapter->isr_int_vec);
+
+	napi_schedule(&sds_ring->napi);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t qlcnic_msi_intr(int irq, void *data)
+{
+	struct qlcnic_host_sds_ring *sds_ring = data;
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+
+	/* clear interrupt */
+	writel(0xffffffff, adapter->tgt_status_reg);
+
+	napi_schedule(&sds_ring->napi);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t qlcnic_msix_intr(int irq, void *data)
+{
+	struct qlcnic_host_sds_ring *sds_ring = data;
+
+	napi_schedule(&sds_ring->napi);
+	return IRQ_HANDLED;
+}
+
+static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter)
+{
+	u32 sw_consumer, hw_consumer;
+	int count = 0, i;
+	struct qlcnic_cmd_buffer *buffer;
+	struct pci_dev *pdev = adapter->pdev;
+	struct net_device *netdev = adapter->netdev;
+	struct qlcnic_skb_frag *frag;
+	int done;
+	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
+
+	if (!spin_trylock(&adapter->tx_clean_lock))
+		return 1;
+
+	sw_consumer = tx_ring->sw_consumer;
+	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
+
+	while (sw_consumer != hw_consumer) {
+		buffer = &tx_ring->cmd_buf_arr[sw_consumer];
+		if (buffer->skb) {
+			frag = &buffer->frag_array[0];
+			pci_unmap_single(pdev, frag->dma, frag->length,
+					 PCI_DMA_TODEVICE);
+			frag->dma = 0ULL;
+			for (i = 1; i < buffer->frag_count; i++) {
+				frag++;
+				pci_unmap_page(pdev, frag->dma, frag->length,
+					       PCI_DMA_TODEVICE);
+				frag->dma = 0ULL;
+			}
+
+			adapter->stats.xmitfinished++;
+			dev_kfree_skb_any(buffer->skb);
+			buffer->skb = NULL;
+		}
+
+		sw_consumer = get_next_index(sw_consumer, tx_ring->num_desc);
+		if (++count >= MAX_STATUS_HANDLE)
+			break;
+	}
+
+	if (count && netif_running(netdev)) {
+		tx_ring->sw_consumer = sw_consumer;
+
+		smp_mb();
+
+		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
+			__netif_tx_lock(tx_ring->txq, smp_processor_id());
+			if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH) {
+				netif_wake_queue(netdev);
+				adapter->tx_timeo_cnt = 0;
+			}
+			__netif_tx_unlock(tx_ring->txq);
+		}
+	}
+	/*
+	 * If everything is freed up to consumer then check if the ring is full
+	 * If the ring is full then check if more needs to be freed and
+	 * schedule the call back again.
+	 *
+	 * This happens when there are 2 CPUs. One could be freeing and the
+	 * other filling it. If the ring is full when we get out of here and
+	 * the card has already interrupted the host then the host can miss the
+	 * interrupt.
+	 *
+	 * There is still a possible race condition and the host could miss an
+	 * interrupt. The card has to take care of this.
+	 */
+	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
+	done = (sw_consumer == hw_consumer);
+	spin_unlock(&adapter->tx_clean_lock);
+
+	return done;
+}
+
+static int qlcnic_poll(struct napi_struct *napi, int budget)
+{
+	struct qlcnic_host_sds_ring *sds_ring =
+		container_of(napi, struct qlcnic_host_sds_ring, napi);
+
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+
+	int tx_complete;
+	int work_done;
+
+	tx_complete = qlcnic_process_cmd_ring(adapter);
+
+	work_done = qlcnic_process_rcv_ring(sds_ring, budget);
+
+	if ((work_done < budget) && tx_complete) {
+		napi_complete(&sds_ring->napi);
+		if (test_bit(__QLCNIC_DEV_UP, &adapter->state))
+			qlcnic_enable_int(sds_ring);
+	}
+
+	return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void qlcnic_poll_controller(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	disable_irq(adapter->irq);
+	qlcnic_intr(adapter->irq, adapter);
+	enable_irq(adapter->irq);
+}
+#endif
+
+static void
+qlcnic_set_drv_state(struct qlcnic_adapter *adapter, int state)
+{
+	u32  val;
+
+	WARN_ON(state != QLCNIC_DEV_NEED_RESET &&
+			state != QLCNIC_DEV_NEED_QUISCENT);
+
+	if (qlcnic_api_lock(adapter))
+		return ;
+
+	val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+
+	if (state == QLCNIC_DEV_NEED_RESET)
+		val |= ((u32)0x1 << (adapter->portnum * 4));
+	else if (state == QLCNIC_DEV_NEED_QUISCENT)
+		val |= ((u32)0x1 << ((adapter->portnum * 4) + 1));
+
+	QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val);
+
+	qlcnic_api_unlock(adapter);
+}
+
+static void
+qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter)
+{
+	u32  val;
+
+	if (qlcnic_api_lock(adapter))
+		goto err;
+
+	val = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
+	val &= ~((u32)0x1 << (adapter->portnum * 4));
+	QLCWR32(adapter, QLCNIC_CRB_DEV_REF_COUNT, val);
+
+	if (!(val & 0x11111111))
+		QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_COLD);
+
+	val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+	val &= ~((u32)0x3 << (adapter->portnum * 4));
+	QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val);
+
+	qlcnic_api_unlock(adapter);
+err:
+	adapter->fw_fail_cnt = 0;
+	clear_bit(__QLCNIC_START_FW, &adapter->state);
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+}
+
+static int
+qlcnic_check_drv_state(struct qlcnic_adapter *adapter)
+{
+	int act, state;
+
+	state = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+	act = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
+
+	if (((state & 0x11111111) == (act & 0x11111111)) ||
+			((act & 0x11111111) == ((state >> 1) & 0x11111111)))
+		return 0;
+	else
+		return 1;
+}
+
+static int
+qlcnic_can_start_firmware(struct qlcnic_adapter *adapter)
+{
+	u32 val, prev_state;
+	int cnt = 0;
+	int portnum = adapter->portnum;
+
+	if (qlcnic_api_lock(adapter))
+		return -1;
+
+	val = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
+	if (!(val & ((int)0x1 << (portnum * 4)))) {
+		val |= ((u32)0x1 << (portnum * 4));
+		QLCWR32(adapter, QLCNIC_CRB_DEV_REF_COUNT, val);
+	} else if (test_and_clear_bit(__QLCNIC_START_FW, &adapter->state)) {
+		goto start_fw;
+	}
+
+	prev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
+
+	switch (prev_state) {
+	case QLCNIC_DEV_COLD:
+start_fw:
+		QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_INITALIZING);
+		qlcnic_api_unlock(adapter);
+		return 1;
+
+	case QLCNIC_DEV_READY:
+		qlcnic_api_unlock(adapter);
+		return 0;
+
+	case QLCNIC_DEV_NEED_RESET:
+		val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+		val |= ((u32)0x1 << (portnum * 4));
+		QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val);
+		break;
+
+	case QLCNIC_DEV_NEED_QUISCENT:
+		val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+		val |= ((u32)0x1 << ((portnum * 4) + 1));
+		QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val);
+		break;
+
+	case QLCNIC_DEV_FAILED:
+		qlcnic_api_unlock(adapter);
+		return -1;
+	}
+
+	qlcnic_api_unlock(adapter);
+	msleep(1000);
+	while ((QLCRD32(adapter, QLCNIC_CRB_DEV_STATE) != QLCNIC_DEV_READY) &&
+			++cnt < 20)
+		msleep(1000);
+
+	if (cnt >= 20)
+		return -1;
+
+	if (qlcnic_api_lock(adapter))
+		return -1;
+
+	val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+	val &= ~((u32)0x3 << (portnum * 4));
+	QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val);
+
+	qlcnic_api_unlock(adapter);
+
+	return 0;
+}
+
+static void
+qlcnic_fwinit_work(struct work_struct *work)
+{
+	struct qlcnic_adapter *adapter = container_of(work,
+			struct qlcnic_adapter, fw_work.work);
+	int dev_state;
+
+	if (++adapter->fw_wait_cnt > FW_POLL_THRESH)
+		goto err_ret;
+
+	if (test_bit(__QLCNIC_START_FW, &adapter->state)) {
+
+		if (qlcnic_check_drv_state(adapter)) {
+			qlcnic_schedule_work(adapter,
+					qlcnic_fwinit_work, FW_POLL_DELAY);
+			return;
+		}
+
+		if (!qlcnic_start_firmware(adapter)) {
+			qlcnic_schedule_work(adapter, qlcnic_attach_work, 0);
+			return;
+		}
+
+		goto err_ret;
+	}
+
+	dev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
+	switch (dev_state) {
+	case QLCNIC_DEV_READY:
+		if (!qlcnic_start_firmware(adapter)) {
+			qlcnic_schedule_work(adapter, qlcnic_attach_work, 0);
+			return;
+		}
+	case QLCNIC_DEV_FAILED:
+		break;
+
+	default:
+		qlcnic_schedule_work(adapter,
+			qlcnic_fwinit_work, 2 * FW_POLL_DELAY);
+		return;
+	}
+
+err_ret:
+	qlcnic_clr_all_drv_state(adapter);
+}
+
+static void
+qlcnic_detach_work(struct work_struct *work)
+{
+	struct qlcnic_adapter *adapter = container_of(work,
+			struct qlcnic_adapter, fw_work.work);
+	struct net_device *netdev = adapter->netdev;
+	u32 status;
+
+	netif_device_detach(netdev);
+
+	qlcnic_down(adapter, netdev);
+
+	qlcnic_detach(adapter);
+
+	status = QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1);
+
+	if (status & QLCNIC_RCODE_FATAL_ERROR)
+		goto err_ret;
+
+	if (adapter->temp == QLCNIC_TEMP_PANIC)
+		goto err_ret;
+
+	qlcnic_set_drv_state(adapter, adapter->dev_state);
+
+	adapter->fw_wait_cnt = 0;
+
+	qlcnic_schedule_work(adapter, qlcnic_fwinit_work, FW_POLL_DELAY);
+
+	return;
+
+err_ret:
+	qlcnic_clr_all_drv_state(adapter);
+
+}
+
+static void
+qlcnic_dev_request_reset(struct qlcnic_adapter *adapter)
+{
+	u32 state;
+
+	if (qlcnic_api_lock(adapter))
+		return;
+
+	state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
+
+	if (state != QLCNIC_DEV_INITALIZING && state != QLCNIC_DEV_NEED_RESET) {
+		QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_NEED_RESET);
+		set_bit(__QLCNIC_START_FW, &adapter->state);
+	}
+
+	qlcnic_api_unlock(adapter);
+}
+
+static void
+qlcnic_schedule_work(struct qlcnic_adapter *adapter,
+		work_func_t func, int delay)
+{
+	INIT_DELAYED_WORK(&adapter->fw_work, func);
+	schedule_delayed_work(&adapter->fw_work, round_jiffies_relative(delay));
+}
+
+static void
+qlcnic_cancel_fw_work(struct qlcnic_adapter *adapter)
+{
+	while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		msleep(10);
+
+	cancel_delayed_work_sync(&adapter->fw_work);
+}
+
+static void
+qlcnic_attach_work(struct work_struct *work)
+{
+	struct qlcnic_adapter *adapter = container_of(work,
+				struct qlcnic_adapter, fw_work.work);
+	struct net_device *netdev = adapter->netdev;
+	int err;
+
+	if (netif_running(netdev)) {
+		err = qlcnic_attach(adapter);
+		if (err)
+			goto done;
+
+		err = qlcnic_up(adapter, netdev);
+		if (err) {
+			qlcnic_detach(adapter);
+			goto done;
+		}
+
+		qlcnic_config_indev_addr(netdev, NETDEV_UP);
+	}
+
+	netif_device_attach(netdev);
+
+done:
+	adapter->fw_fail_cnt = 0;
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
+}
+
+static int
+qlcnic_check_health(struct qlcnic_adapter *adapter)
+{
+	u32 state = 0, heartbit;
+	struct net_device *netdev = adapter->netdev;
+
+	if (qlcnic_check_temp(adapter))
+		goto detach;
+
+	if (adapter->need_fw_reset) {
+		qlcnic_dev_request_reset(adapter);
+		goto detach;
+	}
+
+	state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
+	if (state == QLCNIC_DEV_NEED_RESET || state == QLCNIC_DEV_NEED_QUISCENT)
+		adapter->need_fw_reset = 1;
+
+	heartbit = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
+	if (heartbit != adapter->heartbit) {
+		adapter->heartbit = heartbit;
+		adapter->fw_fail_cnt = 0;
+		if (adapter->need_fw_reset)
+			goto detach;
+		return 0;
+	}
+
+	if (++adapter->fw_fail_cnt < FW_FAIL_THRESH)
+		return 0;
+
+	qlcnic_dev_request_reset(adapter);
+
+	clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state);
+
+	dev_info(&netdev->dev, "firmware hang detected\n");
+
+detach:
+	adapter->dev_state = (state == QLCNIC_DEV_NEED_QUISCENT) ? state :
+		QLCNIC_DEV_NEED_RESET;
+
+	if ((auto_fw_reset == AUTO_FW_RESET_ENABLED) &&
+			!test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		qlcnic_schedule_work(adapter, qlcnic_detach_work, 0);
+
+	return 1;
+}
+
+static void
+qlcnic_fw_poll_work(struct work_struct *work)
+{
+	struct qlcnic_adapter *adapter = container_of(work,
+				struct qlcnic_adapter, fw_work.work);
+
+	if (test_bit(__QLCNIC_RESETTING, &adapter->state))
+		goto reschedule;
+
+
+	if (qlcnic_check_health(adapter))
+		return;
+
+reschedule:
+	qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
+}
+
+static ssize_t
+qlcnic_store_bridged_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	unsigned long new;
+	int ret = -EINVAL;
+
+	if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_BDG))
+		goto err_out;
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		goto err_out;
+
+	if (strict_strtoul(buf, 2, &new))
+		goto err_out;
+
+	if (!qlcnic_config_bridged_mode(adapter, !!new))
+		ret = len;
+
+err_out:
+	return ret;
+}
+
+static ssize_t
+qlcnic_show_bridged_mode(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	int bridged_mode = 0;
+
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_BDG)
+		bridged_mode = !!(adapter->flags & QLCNIC_BRIDGE_ENABLED);
+
+	return sprintf(buf, "%d\n", bridged_mode);
+}
+
+static struct device_attribute dev_attr_bridged_mode = {
+       .attr = {.name = "bridged_mode", .mode = (S_IRUGO | S_IWUSR)},
+       .show = qlcnic_show_bridged_mode,
+       .store = qlcnic_store_bridged_mode,
+};
+
+static ssize_t
+qlcnic_store_diag_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	unsigned long new;
+
+	if (strict_strtoul(buf, 2, &new))
+		return -EINVAL;
+
+	if (!!new != !!(adapter->flags & QLCNIC_DIAG_ENABLED))
+		adapter->flags ^= QLCNIC_DIAG_ENABLED;
+
+	return len;
+}
+
+static ssize_t
+qlcnic_show_diag_mode(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n",
+			!!(adapter->flags & QLCNIC_DIAG_ENABLED));
+}
+
+static struct device_attribute dev_attr_diag_mode = {
+	.attr = {.name = "diag_mode", .mode = (S_IRUGO | S_IWUSR)},
+	.show = qlcnic_show_diag_mode,
+	.store = qlcnic_store_diag_mode,
+};
+
+static int
+qlcnic_sysfs_validate_crb(struct qlcnic_adapter *adapter,
+		loff_t offset, size_t size)
+{
+	if (!(adapter->flags & QLCNIC_DIAG_ENABLED))
+		return -EIO;
+
+	if ((size != 4) || (offset & 0x3))
+		return  -EINVAL;
+
+	if (offset < QLCNIC_PCI_CRBSPACE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static ssize_t
+qlcnic_sysfs_read_crb(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	u32 data;
+	int ret;
+
+	ret = qlcnic_sysfs_validate_crb(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	data = QLCRD32(adapter, offset);
+	memcpy(buf, &data, size);
+	return size;
+}
+
+static ssize_t
+qlcnic_sysfs_write_crb(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	u32 data;
+	int ret;
+
+	ret = qlcnic_sysfs_validate_crb(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	memcpy(&data, buf, size);
+	QLCWR32(adapter, offset, data);
+	return size;
+}
+
+static int
+qlcnic_sysfs_validate_mem(struct qlcnic_adapter *adapter,
+		loff_t offset, size_t size)
+{
+	if (!(adapter->flags & QLCNIC_DIAG_ENABLED))
+		return -EIO;
+
+	if ((size != 8) || (offset & 0x7))
+		return  -EIO;
+
+	return 0;
+}
+
+static ssize_t
+qlcnic_sysfs_read_mem(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	u64 data;
+	int ret;
+
+	ret = qlcnic_sysfs_validate_mem(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	if (qlcnic_pci_mem_read_2M(adapter, offset, &data))
+		return -EIO;
+
+	memcpy(buf, &data, size);
+
+	return size;
+}
+
+static ssize_t
+qlcnic_sysfs_write_mem(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+	u64 data;
+	int ret;
+
+	ret = qlcnic_sysfs_validate_mem(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	memcpy(&data, buf, size);
+
+	if (qlcnic_pci_mem_write_2M(adapter, offset, data))
+		return -EIO;
+
+	return size;
+}
+
+
+static struct bin_attribute bin_attr_crb = {
+	.attr = {.name = "crb", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = qlcnic_sysfs_read_crb,
+	.write = qlcnic_sysfs_write_crb,
+};
+
+static struct bin_attribute bin_attr_mem = {
+	.attr = {.name = "mem", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = qlcnic_sysfs_read_mem,
+	.write = qlcnic_sysfs_write_mem,
+};
+
+static void
+qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter)
+{
+	struct device *dev = &adapter->pdev->dev;
+
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_BDG)
+		if (device_create_file(dev, &dev_attr_bridged_mode))
+			dev_warn(dev,
+				"failed to create bridged_mode sysfs entry\n");
+}
+
+static void
+qlcnic_remove_sysfs_entries(struct qlcnic_adapter *adapter)
+{
+	struct device *dev = &adapter->pdev->dev;
+
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_BDG)
+		device_remove_file(dev, &dev_attr_bridged_mode);
+}
+
+static void
+qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
+{
+	struct device *dev = &adapter->pdev->dev;
+
+	if (device_create_file(dev, &dev_attr_diag_mode))
+		dev_info(dev, "failed to create diag_mode sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_crb))
+		dev_info(dev, "failed to create crb sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_mem))
+		dev_info(dev, "failed to create mem sysfs entry\n");
+}
+
+
+static void
+qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
+{
+	struct device *dev = &adapter->pdev->dev;
+
+	device_remove_file(dev, &dev_attr_diag_mode);
+	device_remove_bin_file(dev, &bin_attr_crb);
+	device_remove_bin_file(dev, &bin_attr_mem);
+}
+
+#ifdef CONFIG_INET
+
+#define is_qlcnic_netdev(dev) (dev->netdev_ops == &qlcnic_netdev_ops)
+
+static int
+qlcnic_destip_supported(struct qlcnic_adapter *adapter)
+{
+	if (adapter->ahw.cut_through)
+		return 0;
+
+	return 1;
+}
+
+static void
+qlcnic_config_indev_addr(struct net_device *dev, unsigned long event)
+{
+	struct in_device *indev;
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+
+	if (!qlcnic_destip_supported(adapter))
+		return;
+
+	indev = in_dev_get(dev);
+	if (!indev)
+		return;
+
+	for_ifa(indev) {
+		switch (event) {
+		case NETDEV_UP:
+			qlcnic_config_ipaddr(adapter,
+					ifa->ifa_address, QLCNIC_IP_UP);
+			break;
+		case NETDEV_DOWN:
+			qlcnic_config_ipaddr(adapter,
+					ifa->ifa_address, QLCNIC_IP_DOWN);
+			break;
+		default:
+			break;
+		}
+	} endfor_ifa(indev);
+
+	in_dev_put(indev);
+	return;
+}
+
+static int qlcnic_netdev_event(struct notifier_block *this,
+				 unsigned long event, void *ptr)
+{
+	struct qlcnic_adapter *adapter;
+	struct net_device *dev = (struct net_device *)ptr;
+
+recheck:
+	if (dev == NULL)
+		goto done;
+
+	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+		dev = vlan_dev_real_dev(dev);
+		goto recheck;
+	}
+
+	if (!is_qlcnic_netdev(dev))
+		goto done;
+
+	adapter = netdev_priv(dev);
+
+	if (!adapter)
+		goto done;
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		goto done;
+
+	qlcnic_config_indev_addr(dev, event);
+done:
+	return NOTIFY_DONE;
+}
+
+static int
+qlcnic_inetaddr_event(struct notifier_block *this,
+		unsigned long event, void *ptr)
+{
+	struct qlcnic_adapter *adapter;
+	struct net_device *dev;
+
+	struct in_ifaddr *ifa = (struct in_ifaddr *)ptr;
+
+	dev = ifa->ifa_dev ? ifa->ifa_dev->dev : NULL;
+
+recheck:
+	if (dev == NULL || !netif_running(dev))
+		goto done;
+
+	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+		dev = vlan_dev_real_dev(dev);
+		goto recheck;
+	}
+
+	if (!is_qlcnic_netdev(dev))
+		goto done;
+
+	adapter = netdev_priv(dev);
+
+	if (!adapter || !qlcnic_destip_supported(adapter))
+		goto done;
+
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		goto done;
+
+	switch (event) {
+	case NETDEV_UP:
+		qlcnic_config_ipaddr(adapter, ifa->ifa_address, QLCNIC_IP_UP);
+		break;
+	case NETDEV_DOWN:
+		qlcnic_config_ipaddr(adapter, ifa->ifa_address, QLCNIC_IP_DOWN);
+		break;
+	default:
+		break;
+	}
+
+done:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block	qlcnic_netdev_cb = {
+	.notifier_call = qlcnic_netdev_event,
+};
+
+static struct notifier_block qlcnic_inetaddr_cb = {
+	.notifier_call = qlcnic_inetaddr_event,
+};
+#else
+static void
+qlcnic_config_indev_addr(struct net_device *dev, unsigned long event)
+{ }
+#endif
+
+static struct pci_driver qlcnic_driver = {
+	.name = qlcnic_driver_name,
+	.id_table = qlcnic_pci_tbl,
+	.probe = qlcnic_probe,
+	.remove = __devexit_p(qlcnic_remove),
+#ifdef CONFIG_PM
+	.suspend = qlcnic_suspend,
+	.resume = qlcnic_resume,
+#endif
+	.shutdown = qlcnic_shutdown
+};
+
+static int __init qlcnic_init_module(void)
+{
+
+	printk(KERN_INFO "%s\n", qlcnic_driver_string);
+
+#ifdef CONFIG_INET
+	register_netdevice_notifier(&qlcnic_netdev_cb);
+	register_inetaddr_notifier(&qlcnic_inetaddr_cb);
+#endif
+
+
+	return pci_register_driver(&qlcnic_driver);
+}
+
+module_init(qlcnic_init_module);
+
+static void __exit qlcnic_exit_module(void)
+{
+
+	pci_unregister_driver(&qlcnic_driver);
+
+#ifdef CONFIG_INET
+	unregister_inetaddr_notifier(&qlcnic_inetaddr_cb);
+	unregister_netdevice_notifier(&qlcnic_netdev_cb);
+#endif
+}
+
+module_exit(qlcnic_exit_module);
-- 
cgit v1.2.3


From 0ec00f0392b807d57a2281576a96552d7694b6bb Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Wed, 13 Jan 2010 00:37:26 +0000
Subject: NET: Add Qlogic ethernet driver for CNA devices

o Separate Ethernet driver for Qlogic CNA devices

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 MAINTAINERS          | 7 +++++++
 drivers/net/Kconfig  | 7 +++++++
 drivers/net/Makefile | 1 +
 3 files changed, 15 insertions(+)

(limited to 'drivers/net')

diff --git a/MAINTAINERS b/MAINTAINERS
index 337dffbe9a47..61367ec865cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4452,6 +4452,13 @@ S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/qla3xxx.*
 
+QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
+M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
+M:	linux-driver@qlogic.com
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/qlcnic/
+
 QLOGIC QLGE 10Gb ETHERNET DRIVER
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5be6a2376f4f..cb0e534418e3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2778,6 +2778,13 @@ config BNX2X
 	  To compile this driver as a module, choose M here: the module
 	  will be called bnx2x.  This is recommended.
 
+config QLCNIC
+	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+	depends on PCI
+	help
+	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+	  devices.
+
 config QLGE
 	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6746e8b8bdfc..0b763cbe9b1f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -149,6 +149,7 @@ ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
 obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
 obj-$(CONFIG_QLA3XXX) += qla3xxx.o
+obj-$(CONFIG_QLCNIC) += qlcnic/
 obj-$(CONFIG_QLGE) += qlge/
 
 obj-$(CONFIG_PPP) += ppp_generic.o
-- 
cgit v1.2.3


From cd2e18fe785082b132d960063df83a02acc9a4f2 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Fri, 1 Jan 2010 17:43:08 +0100
Subject: pcmcia: remove remaining unused IRQ_FIRST_SHARED parameter

Komuro pointed out correctly that I missed one IRQ_FIRST_SHARED
parameter in smc91c92_cs.c, and that another line could be writter
more beautifully.

CC: netdev@vger.kernel.org
CC: Komuro <komurojun-mbn@nifty.com>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/net/pcmcia/smc91c92_cs.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 6dd486d2977b..aa57cfd1e3fb 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -453,8 +453,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->irq.Attributes =
-	IRQ_TYPE_DYNAMIC_SHARING;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->io.IOAddrLines = 16;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
@@ -652,8 +651,7 @@ static int osi_config(struct pcmcia_device *link)
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->irq.Attributes =
-	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->io.NumPorts1 = 64;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
-- 
cgit v1.2.3


From 2c8c1e7297e19bdef3c178c3ea41d898a7716e3e Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 17 Jan 2010 03:35:32 +0000
Subject: net: spread __net_init, __net_exit

__net_init/__net_exit are apparently not going away, so use them
to full extent.

In some cases __net_init was removed, because it was called from
__net_exit code.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 12 ++++++------
 net/8021q/vlan.c                |  4 ++--
 net/8021q/vlanproc.c            |  2 +-
 net/bridge/br_if.c              |  2 +-
 net/core/fib_rules.c            |  2 +-
 net/core/rtnetlink.c            |  4 ++--
 net/core/sock.c                 |  4 ++--
 net/dccp/ipv4.c                 |  4 ++--
 net/dccp/ipv6.c                 |  4 ++--
 net/ipv4/fib_frontend.c         |  4 ++--
 net/ipv4/igmp.c                 |  4 ++--
 net/ipv4/ip_fragment.c          |  8 ++++----
 net/ipv4/ip_gre.c               |  4 ++--
 net/ipv4/ipip.c                 |  7 +++----
 net/ipv4/tcp_ipv4.c             |  4 ++--
 net/ipv4/udp.c                  |  4 ++--
 net/ipv4/udplite.c              |  4 ++--
 net/ipv6/addrconf.c             |  8 ++++----
 net/ipv6/af_inet6.c             |  4 ++--
 net/ipv6/anycast.c              |  2 +-
 net/ipv6/fib6_rules.c           |  4 ++--
 net/ipv6/icmp.c                 |  2 +-
 net/ipv6/ip6_fib.c              |  6 +++---
 net/ipv6/ip6_flowlabel.c        |  9 ++++-----
 net/ipv6/ip6_tunnel.c           |  9 ++++-----
 net/ipv6/mcast.c                | 13 ++++++-------
 net/ipv6/ndisc.c                |  4 ++--
 net/ipv6/proc.c                 |  4 ++--
 net/ipv6/raw.c                  |  4 ++--
 net/ipv6/reassembly.c           |  8 ++++----
 net/ipv6/route.c                |  6 +++---
 net/ipv6/sit.c                  |  9 ++++-----
 net/ipv6/sysctl_net_ipv6.c      |  4 ++--
 net/ipv6/tcp_ipv6.c             |  8 ++++----
 net/ipv6/udp.c                  |  2 +-
 net/ipv6/udplite.c              |  4 ++--
 net/key/af_key.c                |  6 +++---
 net/packet/af_packet.c          |  4 ++--
 net/phonet/pn_dev.c             |  4 ++--
 net/sysctl_net.c                |  4 ++--
 net/unix/af_unix.c              |  4 ++--
 net/unix/sysctl_net_unix.c      |  2 +-
 net/wireless/wext-proc.c        |  4 ++--
 net/xfrm/xfrm_sysctl.c          |  4 ++--
 44 files changed, 107 insertions(+), 112 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6a42a1453afa..99a0ff3889ee 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3307,7 +3307,7 @@ static void bond_remove_proc_entry(struct bonding *bond)
 /* Create the bonding directory under /proc/net, if doesn't exist yet.
  * Caller must hold rtnl_lock.
  */
-static void bond_create_proc_dir(struct bond_net *bn)
+static void __net_init bond_create_proc_dir(struct bond_net *bn)
 {
 	if (!bn->proc_dir) {
 		bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
@@ -3320,7 +3320,7 @@ static void bond_create_proc_dir(struct bond_net *bn)
 /* Destroy the bonding directory under /proc/net, if empty.
  * Caller must hold rtnl_lock.
  */
-static void bond_destroy_proc_dir(struct bond_net *bn)
+static void __net_exit bond_destroy_proc_dir(struct bond_net *bn)
 {
 	if (bn->proc_dir) {
 		remove_proc_entry(DRV_NAME, bn->net->proc_net);
@@ -3338,11 +3338,11 @@ static void bond_remove_proc_entry(struct bonding *bond)
 {
 }
 
-static void bond_create_proc_dir(struct bond_net *bn)
+static inline void bond_create_proc_dir(struct bond_net *bn)
 {
 }
 
-static void bond_destroy_proc_dir(struct bond_net *bn)
+static inline void bond_destroy_proc_dir(struct bond_net *bn)
 {
 }
 
@@ -4955,7 +4955,7 @@ out_netdev:
 	goto out;
 }
 
-static int bond_net_init(struct net *net)
+static int __net_init bond_net_init(struct net *net)
 {
 	struct bond_net *bn = net_generic(net, bond_net_id);
 
@@ -4967,7 +4967,7 @@ static int bond_net_init(struct net *net)
 	return 0;
 }
 
-static void bond_net_exit(struct net *net)
+static void __net_exit bond_net_exit(struct net *net)
 {
 	struct bond_net *bn = net_generic(net, bond_net_id);
 
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 33f90e7362cc..453512266ea1 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -663,7 +663,7 @@ out:
 	return err;
 }
 
-static int vlan_init_net(struct net *net)
+static int __net_init vlan_init_net(struct net *net)
 {
 	struct vlan_net *vn = net_generic(net, vlan_net_id);
 	int err;
@@ -675,7 +675,7 @@ static int vlan_init_net(struct net *net)
 	return err;
 }
 
-static void vlan_exit_net(struct net *net)
+static void __net_exit vlan_exit_net(struct net *net)
 {
 	vlan_proc_cleanup(net);
 }
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 9ec1f057c03a..afead353e215 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -140,7 +140,7 @@ void vlan_proc_cleanup(struct net *net)
  *	Create /proc/net/vlan entries
  */
 
-int vlan_proc_init(struct net *net)
+int __net_init vlan_proc_init(struct net *net)
 {
 	struct vlan_net *vn = net_generic(net, vlan_net_id);
 
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index a2cbe61f6e65..7bc0604069c7 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -467,7 +467,7 @@ int br_del_if(struct net_bridge *br, struct net_device *dev)
 	return 0;
 }
 
-void br_net_exit(struct net *net)
+void __net_exit br_net_exit(struct net *net)
 {
 	struct net_device *dev;
 	LIST_HEAD(list);
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 02a3b2c69c1e..9a24377146bf 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -708,7 +708,7 @@ static struct notifier_block fib_rules_notifier = {
 	.notifier_call = fib_rules_event,
 };
 
-static int fib_rules_net_init(struct net *net)
+static int __net_init fib_rules_net_init(struct net *net)
 {
 	INIT_LIST_HEAD(&net->rules_ops);
 	spin_lock_init(&net->rules_mod_lock);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 794bcb897ff0..62f3878a6010 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1386,7 +1386,7 @@ static struct notifier_block rtnetlink_dev_notifier = {
 };
 
 
-static int rtnetlink_net_init(struct net *net)
+static int __net_init rtnetlink_net_init(struct net *net)
 {
 	struct sock *sk;
 	sk = netlink_kernel_create(net, NETLINK_ROUTE, RTNLGRP_MAX,
@@ -1397,7 +1397,7 @@ static int rtnetlink_net_init(struct net *net)
 	return 0;
 }
 
-static void rtnetlink_net_exit(struct net *net)
+static void __net_exit rtnetlink_net_exit(struct net *net)
 {
 	netlink_kernel_release(net->rtnl);
 	net->rtnl = NULL;
diff --git a/net/core/sock.c b/net/core/sock.c
index 10b1d3243a72..ceef50bd131b 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2140,13 +2140,13 @@ int sock_prot_inuse_get(struct net *net, struct proto *prot)
 }
 EXPORT_SYMBOL_GPL(sock_prot_inuse_get);
 
-static int sock_inuse_init_net(struct net *net)
+static int __net_init sock_inuse_init_net(struct net *net)
 {
 	net->core.inuse = alloc_percpu(struct prot_inuse);
 	return net->core.inuse ? 0 : -ENOMEM;
 }
 
-static void sock_inuse_exit_net(struct net *net)
+static void __net_exit sock_inuse_exit_net(struct net *net)
 {
 	free_percpu(net->core.inuse);
 }
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index dad7bc4878e0..b195c4feaa0a 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -996,7 +996,7 @@ static struct inet_protosw dccp_v4_protosw = {
 	.flags		= INET_PROTOSW_ICSK,
 };
 
-static int dccp_v4_init_net(struct net *net)
+static int __net_init dccp_v4_init_net(struct net *net)
 {
 	int err;
 
@@ -1005,7 +1005,7 @@ static int dccp_v4_init_net(struct net *net)
 	return err;
 }
 
-static void dccp_v4_exit_net(struct net *net)
+static void __net_exit dccp_v4_exit_net(struct net *net)
 {
 	inet_ctl_sock_destroy(net->dccp.v4_ctl_sk);
 }
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index baf05cf43c28..1aec6349e858 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -1189,7 +1189,7 @@ static struct inet_protosw dccp_v6_protosw = {
 	.flags		= INET_PROTOSW_ICSK,
 };
 
-static int dccp_v6_init_net(struct net *net)
+static int __net_init dccp_v6_init_net(struct net *net)
 {
 	int err;
 
@@ -1198,7 +1198,7 @@ static int dccp_v6_init_net(struct net *net)
 	return err;
 }
 
-static void dccp_v6_exit_net(struct net *net)
+static void __net_exit dccp_v6_exit_net(struct net *net)
 {
 	inet_ctl_sock_destroy(net->dccp.v6_ctl_sk);
 }
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 82dbf711d6d0..9b3e28ed5240 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -883,7 +883,7 @@ static void nl_fib_input(struct sk_buff *skb)
 	netlink_unicast(net->ipv4.fibnl, skb, pid, MSG_DONTWAIT);
 }
 
-static int nl_fib_lookup_init(struct net *net)
+static int __net_init nl_fib_lookup_init(struct net *net)
 {
 	struct sock *sk;
 	sk = netlink_kernel_create(net, NETLINK_FIB_LOOKUP, 0,
@@ -1004,7 +1004,7 @@ fail:
 	return err;
 }
 
-static void __net_exit ip_fib_net_exit(struct net *net)
+static void ip_fib_net_exit(struct net *net)
 {
 	unsigned int i;
 
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 76c08402c933..8f5468393f01 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2603,7 +2603,7 @@ static const struct file_operations igmp_mcf_seq_fops = {
 	.release	=	seq_release_net,
 };
 
-static int igmp_net_init(struct net *net)
+static int __net_init igmp_net_init(struct net *net)
 {
 	struct proc_dir_entry *pde;
 
@@ -2621,7 +2621,7 @@ out_igmp:
 	return -ENOMEM;
 }
 
-static void igmp_net_exit(struct net *net)
+static void __net_exit igmp_net_exit(struct net *net)
 {
 	proc_net_remove(net, "mcfilter");
 	proc_net_remove(net, "igmp");
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 86964b353c31..891c72aea520 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -646,7 +646,7 @@ static struct ctl_table ip4_frags_ctl_table[] = {
 	{ }
 };
 
-static int ip4_frags_ns_ctl_register(struct net *net)
+static int __net_init ip4_frags_ns_ctl_register(struct net *net)
 {
 	struct ctl_table *table;
 	struct ctl_table_header *hdr;
@@ -676,7 +676,7 @@ err_alloc:
 	return -ENOMEM;
 }
 
-static void ip4_frags_ns_ctl_unregister(struct net *net)
+static void __net_exit ip4_frags_ns_ctl_unregister(struct net *net)
 {
 	struct ctl_table *table;
 
@@ -704,7 +704,7 @@ static inline void ip4_frags_ctl_register(void)
 }
 #endif
 
-static int ipv4_frags_init_net(struct net *net)
+static int __net_init ipv4_frags_init_net(struct net *net)
 {
 	/*
 	 * Fragment cache limits. We will commit 256K at one time. Should we
@@ -726,7 +726,7 @@ static int ipv4_frags_init_net(struct net *net)
 	return ip4_frags_ns_ctl_register(net);
 }
 
-static void ipv4_frags_exit_net(struct net *net)
+static void __net_exit ipv4_frags_exit_net(struct net *net)
 {
 	ip4_frags_ns_ctl_unregister(net);
 	inet_frags_exit_net(&net->ipv4.frags, &ip4_frags);
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index f36ce156cac6..7631b20490f5 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1307,7 +1307,7 @@ static void ipgre_destroy_tunnels(struct ipgre_net *ign, struct list_head *head)
 	}
 }
 
-static int ipgre_init_net(struct net *net)
+static int __net_init ipgre_init_net(struct net *net)
 {
 	struct ipgre_net *ign = net_generic(net, ipgre_net_id);
 	int err;
@@ -1334,7 +1334,7 @@ err_alloc_dev:
 	return err;
 }
 
-static void ipgre_exit_net(struct net *net)
+static void __net_exit ipgre_exit_net(struct net *net)
 {
 	struct ipgre_net *ign;
 	LIST_HEAD(list);
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index eda04fed3379..95db732e542b 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -130,7 +130,6 @@ struct ipip_net {
 	struct net_device *fb_tunnel_dev;
 };
 
-static void ipip_fb_tunnel_init(struct net_device *dev);
 static void ipip_tunnel_init(struct net_device *dev);
 static void ipip_tunnel_setup(struct net_device *dev);
 
@@ -730,7 +729,7 @@ static void ipip_tunnel_init(struct net_device *dev)
 	ipip_tunnel_bind_dev(dev);
 }
 
-static void ipip_fb_tunnel_init(struct net_device *dev)
+static void __net_init ipip_fb_tunnel_init(struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
 	struct iphdr *iph = &tunnel->parms.iph;
@@ -773,7 +772,7 @@ static void ipip_destroy_tunnels(struct ipip_net *ipn, struct list_head *head)
 	}
 }
 
-static int ipip_init_net(struct net *net)
+static int __net_init ipip_init_net(struct net *net)
 {
 	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 	int err;
@@ -806,7 +805,7 @@ err_alloc_dev:
 	return err;
 }
 
-static void ipip_exit_net(struct net *net)
+static void __net_exit ipip_exit_net(struct net *net)
 {
 	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 	LIST_HEAD(list);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 356f544c4c10..c3588b4fd979 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2430,12 +2430,12 @@ static struct tcp_seq_afinfo tcp4_seq_afinfo = {
 	},
 };
 
-static int tcp4_proc_init_net(struct net *net)
+static int __net_init tcp4_proc_init_net(struct net *net)
 {
 	return tcp_proc_register(net, &tcp4_seq_afinfo);
 }
 
-static void tcp4_proc_exit_net(struct net *net)
+static void __net_exit tcp4_proc_exit_net(struct net *net)
 {
 	tcp_proc_unregister(net, &tcp4_seq_afinfo);
 }
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index f0126fdd7e04..4f7d2122d818 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2027,12 +2027,12 @@ static struct udp_seq_afinfo udp4_seq_afinfo = {
 	},
 };
 
-static int udp4_proc_init_net(struct net *net)
+static int __net_init udp4_proc_init_net(struct net *net)
 {
 	return udp_proc_register(net, &udp4_seq_afinfo);
 }
 
-static void udp4_proc_exit_net(struct net *net)
+static void __net_exit udp4_proc_exit_net(struct net *net)
 {
 	udp_proc_unregister(net, &udp4_seq_afinfo);
 }
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index 66f79513f4a5..6610bf76369f 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -81,12 +81,12 @@ static struct udp_seq_afinfo udplite4_seq_afinfo = {
 	},
 };
 
-static int udplite4_proc_init_net(struct net *net)
+static int __net_init udplite4_proc_init_net(struct net *net)
 {
 	return udp_proc_register(net, &udplite4_seq_afinfo);
 }
 
-static void udplite4_proc_exit_net(struct net *net)
+static void __net_exit udplite4_proc_exit_net(struct net *net)
 {
 	udp_proc_unregister(net, &udplite4_seq_afinfo);
 }
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index de7a194a64ab..1593289155ff 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3027,14 +3027,14 @@ static const struct file_operations if6_fops = {
 	.release	= seq_release_net,
 };
 
-static int if6_proc_net_init(struct net *net)
+static int __net_init if6_proc_net_init(struct net *net)
 {
 	if (!proc_net_fops_create(net, "if_inet6", S_IRUGO, &if6_fops))
 		return -ENOMEM;
 	return 0;
 }
 
-static void if6_proc_net_exit(struct net *net)
+static void __net_exit if6_proc_net_exit(struct net *net)
 {
        proc_net_remove(net, "if_inet6");
 }
@@ -4418,7 +4418,7 @@ static void addrconf_sysctl_unregister(struct inet6_dev *idev)
 
 #endif
 
-static int addrconf_init_net(struct net *net)
+static int __net_init addrconf_init_net(struct net *net)
 {
 	int err;
 	struct ipv6_devconf *all, *dflt;
@@ -4467,7 +4467,7 @@ err_alloc_all:
 	return err;
 }
 
-static void addrconf_exit_net(struct net *net)
+static void __net_exit addrconf_exit_net(struct net *net)
 {
 #ifdef CONFIG_SYSCTL
 	__addrconf_sysctl_unregister(net->ipv6.devconf_dflt);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 12e69d364dd5..e29160ff4a0f 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -999,7 +999,7 @@ err_udplite_mib:
 	return -ENOMEM;
 }
 
-static void __net_exit ipv6_cleanup_mibs(struct net *net)
+static void ipv6_cleanup_mibs(struct net *net)
 {
 	snmp_mib_free((void **)net->mib.udp_stats_in6);
 	snmp_mib_free((void **)net->mib.udplite_stats_in6);
@@ -1042,7 +1042,7 @@ out:
 #endif
 }
 
-static void inet6_net_exit(struct net *net)
+static void __net_exit inet6_net_exit(struct net *net)
 {
 #ifdef CONFIG_PROC_FS
 	udp6_proc_exit(net);
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index f1c74c8ef9de..c4f6ca32fa74 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -538,7 +538,7 @@ static const struct file_operations ac6_seq_fops = {
 	.release	=	seq_release_net,
 };
 
-int ac6_proc_init(struct net *net)
+int __net_init ac6_proc_init(struct net *net)
 {
 	if (!proc_net_fops_create(net, "anycast6", S_IRUGO, &ac6_seq_fops))
 		return -ENOMEM;
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index b7aa7c64cc4a..551882b9dfd6 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -262,7 +262,7 @@ static struct fib_rules_ops fib6_rules_ops_template = {
 	.fro_net		= &init_net,
 };
 
-static int fib6_rules_net_init(struct net *net)
+static int __net_init fib6_rules_net_init(struct net *net)
 {
 	struct fib_rules_ops *ops;
 	int err = -ENOMEM;
@@ -291,7 +291,7 @@ out_fib6_rules_ops:
 	goto out;
 }
 
-static void fib6_rules_net_exit(struct net *net)
+static void __net_exit fib6_rules_net_exit(struct net *net)
 {
 	fib_rules_unregister(net->ipv6.fib6_rules_ops);
 }
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 4ae661bc3677..217dbc2e28d4 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -951,7 +951,7 @@ ctl_table ipv6_icmp_table_template[] = {
 	{ },
 };
 
-struct ctl_table *ipv6_icmp_sysctl_init(struct net *net)
+struct ctl_table * __net_init ipv6_icmp_sysctl_init(struct net *net)
 {
 	struct ctl_table *table;
 
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 0e93ca56eb69..f626ea2b304f 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -239,7 +239,7 @@ struct fib6_table *fib6_get_table(struct net *net, u32 id)
 	return NULL;
 }
 
-static void fib6_tables_init(struct net *net)
+static void __net_init fib6_tables_init(struct net *net)
 {
 	fib6_link_table(net, net->ipv6.fib6_main_tbl);
 	fib6_link_table(net, net->ipv6.fib6_local_tbl);
@@ -262,7 +262,7 @@ struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi *fl,
 	return (struct dst_entry *) lookup(net, net->ipv6.fib6_main_tbl, fl, flags);
 }
 
-static void fib6_tables_init(struct net *net)
+static void __net_init fib6_tables_init(struct net *net)
 {
 	fib6_link_table(net, net->ipv6.fib6_main_tbl);
 }
@@ -1469,7 +1469,7 @@ static void fib6_gc_timer_cb(unsigned long arg)
 	fib6_run_gc(0, (struct net *)arg);
 }
 
-static int fib6_net_init(struct net *net)
+static int __net_init fib6_net_init(struct net *net)
 {
 	setup_timer(&net->ipv6.ip6_fib_timer, fib6_gc_timer_cb, (unsigned long)net);
 
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index 6e7bffa2205e..e41eba8aacf1 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -154,7 +154,7 @@ static void ip6_fl_gc(unsigned long dummy)
 	write_unlock(&ip6_fl_lock);
 }
 
-static void ip6_fl_purge(struct net *net)
+static void __net_exit ip6_fl_purge(struct net *net)
 {
 	int i;
 
@@ -735,7 +735,7 @@ static const struct file_operations ip6fl_seq_fops = {
 	.release	=	seq_release_net,
 };
 
-static int ip6_flowlabel_proc_init(struct net *net)
+static int __net_init ip6_flowlabel_proc_init(struct net *net)
 {
 	if (!proc_net_fops_create(net, "ip6_flowlabel",
 				  S_IRUGO, &ip6fl_seq_fops))
@@ -743,7 +743,7 @@ static int ip6_flowlabel_proc_init(struct net *net)
 	return 0;
 }
 
-static void ip6_flowlabel_proc_fini(struct net *net)
+static void __net_exit ip6_flowlabel_proc_fini(struct net *net)
 {
 	proc_net_remove(net, "ip6_flowlabel");
 }
@@ -754,11 +754,10 @@ static inline int ip6_flowlabel_proc_init(struct net *net)
 }
 static inline void ip6_flowlabel_proc_fini(struct net *net)
 {
-	return ;
 }
 #endif
 
-static inline void ip6_flowlabel_net_exit(struct net *net)
+static void __net_exit ip6_flowlabel_net_exit(struct net *net)
 {
 	ip6_fl_purge(net);
 	ip6_flowlabel_proc_fini(net);
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index d453d07b0dfe..fbd786981aa9 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -74,7 +74,6 @@ MODULE_LICENSE("GPL");
 		     (addr)->s6_addr32[2] ^ (addr)->s6_addr32[3]) & \
 		    (HASH_SIZE - 1))
 
-static void ip6_fb_tnl_dev_init(struct net_device *dev);
 static void ip6_tnl_dev_init(struct net_device *dev);
 static void ip6_tnl_dev_setup(struct net_device *dev);
 
@@ -1364,7 +1363,7 @@ static void ip6_tnl_dev_init(struct net_device *dev)
  * Return: 0
  **/
 
-static void ip6_fb_tnl_dev_init(struct net_device *dev)
+static void __net_init ip6_fb_tnl_dev_init(struct net_device *dev)
 {
 	struct ip6_tnl *t = netdev_priv(dev);
 	struct net *net = dev_net(dev);
@@ -1388,7 +1387,7 @@ static struct xfrm6_tunnel ip6ip6_handler = {
 	.priority	=	1,
 };
 
-static void ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n)
+static void __net_exit ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n)
 {
 	int h;
 	struct ip6_tnl *t;
@@ -1407,7 +1406,7 @@ static void ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n)
 	unregister_netdevice_many(&list);
 }
 
-static int ip6_tnl_init_net(struct net *net)
+static int __net_init ip6_tnl_init_net(struct net *net)
 {
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 	int err;
@@ -1436,7 +1435,7 @@ err_alloc_dev:
 	return err;
 }
 
-static void ip6_tnl_exit_net(struct net *net)
+static void __net_exit ip6_tnl_exit_net(struct net *net)
 {
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 1f9c44442e65..25f6cca79e6b 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2646,7 +2646,7 @@ static const struct file_operations igmp6_mcf_seq_fops = {
 	.release	=	seq_release_net,
 };
 
-static int igmp6_proc_init(struct net *net)
+static int __net_init igmp6_proc_init(struct net *net)
 {
 	int err;
 
@@ -2666,23 +2666,22 @@ out_proc_net_igmp6:
 	goto out;
 }
 
-static void igmp6_proc_exit(struct net *net)
+static void __net_exit igmp6_proc_exit(struct net *net)
 {
 	proc_net_remove(net, "mcfilter6");
 	proc_net_remove(net, "igmp6");
 }
 #else
-static int igmp6_proc_init(struct net *net)
+static inline int igmp6_proc_init(struct net *net)
 {
 	return 0;
 }
-static void igmp6_proc_exit(struct net *net)
+static inline void igmp6_proc_exit(struct net *net)
 {
-	;
 }
 #endif
 
-static int igmp6_net_init(struct net *net)
+static int __net_init igmp6_net_init(struct net *net)
 {
 	int err;
 
@@ -2708,7 +2707,7 @@ out_sock_create:
 	goto out;
 }
 
-static void igmp6_net_exit(struct net *net)
+static void __net_exit igmp6_net_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv6.igmp_sk);
 	igmp6_proc_exit(net);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index c45852798092..2dfec6bb8ada 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1772,7 +1772,7 @@ int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, void __user *bu
 
 #endif
 
-static int ndisc_net_init(struct net *net)
+static int __net_init ndisc_net_init(struct net *net)
 {
 	struct ipv6_pinfo *np;
 	struct sock *sk;
@@ -1797,7 +1797,7 @@ static int ndisc_net_init(struct net *net)
 	return 0;
 }
 
-static void ndisc_net_exit(struct net *net)
+static void __net_exit ndisc_net_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv6.ndisc_sk);
 }
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 7b197b7132e0..02f20016b4c9 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -267,7 +267,7 @@ int snmp6_unregister_dev(struct inet6_dev *idev)
 	return 0;
 }
 
-static int ipv6_proc_init_net(struct net *net)
+static int __net_init ipv6_proc_init_net(struct net *net)
 {
 	if (!proc_net_fops_create(net, "sockstat6", S_IRUGO,
 			&sockstat6_seq_fops))
@@ -288,7 +288,7 @@ proc_dev_snmp6_fail:
 	return -ENOMEM;
 }
 
-static void ipv6_proc_exit_net(struct net *net)
+static void __net_exit ipv6_proc_exit_net(struct net *net)
 {
 	proc_net_remove(net, "sockstat6");
 	proc_net_remove(net, "dev_snmp6");
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 926ce8eeffaf..ed31c37c6e39 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -1275,7 +1275,7 @@ static const struct file_operations raw6_seq_fops = {
 	.release =	seq_release_net,
 };
 
-static int raw6_init_net(struct net *net)
+static int __net_init raw6_init_net(struct net *net)
 {
 	if (!proc_net_fops_create(net, "raw6", S_IRUGO, &raw6_seq_fops))
 		return -ENOMEM;
@@ -1283,7 +1283,7 @@ static int raw6_init_net(struct net *net)
 	return 0;
 }
 
-static void raw6_exit_net(struct net *net)
+static void __net_exit raw6_exit_net(struct net *net)
 {
 	proc_net_remove(net, "raw6");
 }
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 2cddea3bd6be..fa38fc7cc6e9 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -672,7 +672,7 @@ static struct ctl_table ip6_frags_ctl_table[] = {
 	{ }
 };
 
-static int ip6_frags_ns_sysctl_register(struct net *net)
+static int __net_init ip6_frags_ns_sysctl_register(struct net *net)
 {
 	struct ctl_table *table;
 	struct ctl_table_header *hdr;
@@ -702,7 +702,7 @@ err_alloc:
 	return -ENOMEM;
 }
 
-static void ip6_frags_ns_sysctl_unregister(struct net *net)
+static void __net_exit ip6_frags_ns_sysctl_unregister(struct net *net)
 {
 	struct ctl_table *table;
 
@@ -745,7 +745,7 @@ static inline void ip6_frags_sysctl_unregister(void)
 }
 #endif
 
-static int ipv6_frags_init_net(struct net *net)
+static int __net_init ipv6_frags_init_net(struct net *net)
 {
 	net->ipv6.frags.high_thresh = 256 * 1024;
 	net->ipv6.frags.low_thresh = 192 * 1024;
@@ -756,7 +756,7 @@ static int ipv6_frags_init_net(struct net *net)
 	return ip6_frags_ns_sysctl_register(net);
 }
 
-static void ipv6_frags_exit_net(struct net *net)
+static void __net_exit ipv6_frags_exit_net(struct net *net)
 {
 	ip6_frags_ns_sysctl_unregister(net);
 	inet_frags_exit_net(&net->ipv6.frags, &ip6_frags);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index c2bd74c5f8d9..8500156f2637 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2612,7 +2612,7 @@ ctl_table ipv6_route_table_template[] = {
 	{ }
 };
 
-struct ctl_table *ipv6_route_sysctl_init(struct net *net)
+struct ctl_table * __net_init ipv6_route_sysctl_init(struct net *net)
 {
 	struct ctl_table *table;
 
@@ -2637,7 +2637,7 @@ struct ctl_table *ipv6_route_sysctl_init(struct net *net)
 }
 #endif
 
-static int ip6_route_net_init(struct net *net)
+static int __net_init ip6_route_net_init(struct net *net)
 {
 	int ret = -ENOMEM;
 
@@ -2702,7 +2702,7 @@ out_ip6_dst_ops:
 	goto out;
 }
 
-static void ip6_route_net_exit(struct net *net)
+static void __net_exit ip6_route_net_exit(struct net *net)
 {
 #ifdef CONFIG_PROC_FS
 	proc_net_remove(net, "ipv6_route");
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 976e68244b99..10207cc8cc0e 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -62,7 +62,6 @@
 #define HASH_SIZE  16
 #define HASH(addr) (((__force u32)addr^((__force u32)addr>>4))&0xF)
 
-static void ipip6_fb_tunnel_init(struct net_device *dev);
 static void ipip6_tunnel_init(struct net_device *dev);
 static void ipip6_tunnel_setup(struct net_device *dev);
 
@@ -1120,7 +1119,7 @@ static void ipip6_tunnel_init(struct net_device *dev)
 	ipip6_tunnel_bind_dev(dev);
 }
 
-static void ipip6_fb_tunnel_init(struct net_device *dev)
+static void __net_init ipip6_fb_tunnel_init(struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
 	struct iphdr *iph = &tunnel->parms.iph;
@@ -1145,7 +1144,7 @@ static struct xfrm_tunnel sit_handler = {
 	.priority	=	1,
 };
 
-static void sit_destroy_tunnels(struct sit_net *sitn, struct list_head *head)
+static void __net_exit sit_destroy_tunnels(struct sit_net *sitn, struct list_head *head)
 {
 	int prio;
 
@@ -1162,7 +1161,7 @@ static void sit_destroy_tunnels(struct sit_net *sitn, struct list_head *head)
 	}
 }
 
-static int sit_init_net(struct net *net)
+static int __net_init sit_init_net(struct net *net)
 {
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 	int err;
@@ -1195,7 +1194,7 @@ err_alloc_dev:
 	return err;
 }
 
-static void sit_exit_net(struct net *net)
+static void __net_exit sit_exit_net(struct net *net)
 {
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 	LIST_HEAD(list);
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index c690736885b4..f841d93bf987 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -55,7 +55,7 @@ struct ctl_path net_ipv6_ctl_path[] = {
 };
 EXPORT_SYMBOL_GPL(net_ipv6_ctl_path);
 
-static int ipv6_sysctl_net_init(struct net *net)
+static int __net_init ipv6_sysctl_net_init(struct net *net)
 {
 	struct ctl_table *ipv6_table;
 	struct ctl_table *ipv6_route_table;
@@ -98,7 +98,7 @@ out_ipv6_table:
 	goto out;
 }
 
-static void ipv6_sysctl_net_exit(struct net *net)
+static void __net_exit ipv6_sysctl_net_exit(struct net *net)
 {
 	struct ctl_table *ipv6_table;
 	struct ctl_table *ipv6_route_table;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 82f2dea0e39e..6963a6b6763e 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2113,7 +2113,7 @@ static struct tcp_seq_afinfo tcp6_seq_afinfo = {
 	},
 };
 
-int tcp6_proc_init(struct net *net)
+int __net_init tcp6_proc_init(struct net *net)
 {
 	return tcp_proc_register(net, &tcp6_seq_afinfo);
 }
@@ -2182,18 +2182,18 @@ static struct inet_protosw tcpv6_protosw = {
 				INET_PROTOSW_ICSK,
 };
 
-static int tcpv6_net_init(struct net *net)
+static int __net_init tcpv6_net_init(struct net *net)
 {
 	return inet_ctl_sock_create(&net->ipv6.tcp_sk, PF_INET6,
 				    SOCK_RAW, IPPROTO_TCP, net);
 }
 
-static void tcpv6_net_exit(struct net *net)
+static void __net_exit tcpv6_net_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv6.tcp_sk);
 }
 
-static void tcpv6_net_exit_batch(struct list_head *net_exit_list)
+static void __net_exit tcpv6_net_exit_batch(struct list_head *net_exit_list)
 {
 	inet_twsk_purge(&tcp_hashinfo, &tcp_death_row, AF_INET6);
 }
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 69ebdbe78c47..34efb3589ffa 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1396,7 +1396,7 @@ static struct udp_seq_afinfo udp6_seq_afinfo = {
 	},
 };
 
-int udp6_proc_init(struct net *net)
+int __net_init udp6_proc_init(struct net *net)
 {
 	return udp_proc_register(net, &udp6_seq_afinfo);
 }
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 6ea6938919e6..5f48fadc27f7 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -104,12 +104,12 @@ static struct udp_seq_afinfo udplite6_seq_afinfo = {
 	},
 };
 
-static int udplite6_proc_init_net(struct net *net)
+static int __net_init udplite6_proc_init_net(struct net *net)
 {
 	return udp_proc_register(net, &udplite6_seq_afinfo);
 }
 
-static void udplite6_proc_exit_net(struct net *net)
+static void __net_exit udplite6_proc_exit_net(struct net *net)
 {
 	udp_proc_unregister(net, &udplite6_seq_afinfo);
 }
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 76fa6fef6473..4744b1f6372f 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3738,17 +3738,17 @@ static int __net_init pfkey_init_proc(struct net *net)
 	return 0;
 }
 
-static void pfkey_exit_proc(struct net *net)
+static void __net_exit pfkey_exit_proc(struct net *net)
 {
 	proc_net_remove(net, "pfkey");
 }
 #else
-static int __net_init pfkey_init_proc(struct net *net)
+static inline int pfkey_init_proc(struct net *net)
 {
 	return 0;
 }
 
-static void pfkey_exit_proc(struct net *net)
+static inline void pfkey_exit_proc(struct net *net)
 {
 }
 #endif
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index e0516a22be2e..a97acfe7e770 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2448,7 +2448,7 @@ static const struct file_operations packet_seq_fops = {
 
 #endif
 
-static int packet_net_init(struct net *net)
+static int __net_init packet_net_init(struct net *net)
 {
 	rwlock_init(&net->packet.sklist_lock);
 	INIT_HLIST_HEAD(&net->packet.sklist);
@@ -2459,7 +2459,7 @@ static int packet_net_init(struct net *net)
 	return 0;
 }
 
-static void packet_net_exit(struct net *net)
+static void __net_exit packet_net_exit(struct net *net)
 {
 	proc_net_remove(net, "packet");
 }
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index bc4a33bf2d3d..c597cc53a6fb 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -311,7 +311,7 @@ static struct notifier_block phonet_device_notifier = {
 };
 
 /* Per-namespace Phonet devices handling */
-static int phonet_init_net(struct net *net)
+static int __net_init phonet_init_net(struct net *net)
 {
 	struct phonet_net *pnn = net_generic(net, phonet_net_id);
 
@@ -324,7 +324,7 @@ static int phonet_init_net(struct net *net)
 	return 0;
 }
 
-static void phonet_exit_net(struct net *net)
+static void __net_exit phonet_exit_net(struct net *net)
 {
 	struct phonet_net *pnn = net_generic(net, phonet_net_id);
 	struct net_device *dev;
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index 0b15d7250c40..53196009160a 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -71,7 +71,7 @@ static struct ctl_table_root net_sysctl_ro_root = {
 	.permissions = net_ctl_ro_header_perms,
 };
 
-static int sysctl_net_init(struct net *net)
+static int __net_init sysctl_net_init(struct net *net)
 {
 	setup_sysctl_set(&net->sysctls,
 			 &net_sysctl_ro_root.default_set,
@@ -79,7 +79,7 @@ static int sysctl_net_init(struct net *net)
 	return 0;
 }
 
-static void sysctl_net_exit(struct net *net)
+static void __net_exit sysctl_net_exit(struct net *net)
 {
 	WARN_ON(!list_empty(&net->sysctls.list));
 	return;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index f25511903115..9bc9b92bc099 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -2224,7 +2224,7 @@ static const struct net_proto_family unix_family_ops = {
 };
 
 
-static int unix_net_init(struct net *net)
+static int __net_init unix_net_init(struct net *net)
 {
 	int error = -ENOMEM;
 
@@ -2243,7 +2243,7 @@ out:
 	return error;
 }
 
-static void unix_net_exit(struct net *net)
+static void __net_exit unix_net_exit(struct net *net)
 {
 	unix_sysctl_unregister(net);
 	proc_net_remove(net, "unix");
diff --git a/net/unix/sysctl_net_unix.c b/net/unix/sysctl_net_unix.c
index 708f5df6b7f0..d095c7be10d0 100644
--- a/net/unix/sysctl_net_unix.c
+++ b/net/unix/sysctl_net_unix.c
@@ -31,7 +31,7 @@ static struct ctl_path unix_path[] = {
 	{ },
 };
 
-int unix_sysctl_register(struct net *net)
+int __net_init unix_sysctl_register(struct net *net)
 {
 	struct ctl_table *table;
 
diff --git a/net/wireless/wext-proc.c b/net/wireless/wext-proc.c
index 273a7f77c834..8bafa31fa9f8 100644
--- a/net/wireless/wext-proc.c
+++ b/net/wireless/wext-proc.c
@@ -140,7 +140,7 @@ static const struct file_operations wireless_seq_fops = {
 	.release = seq_release_net,
 };
 
-int wext_proc_init(struct net *net)
+int __net_init wext_proc_init(struct net *net)
 {
 	/* Create /proc/net/wireless entry */
 	if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops))
@@ -149,7 +149,7 @@ int wext_proc_init(struct net *net)
 	return 0;
 }
 
-void wext_proc_exit(struct net *net)
+void __net_exit wext_proc_exit(struct net *net)
 {
 	proc_net_remove(net, "wireless");
 }
diff --git a/net/xfrm/xfrm_sysctl.c b/net/xfrm/xfrm_sysctl.c
index 2e221f2cad7e..2c4d6cdcba49 100644
--- a/net/xfrm/xfrm_sysctl.c
+++ b/net/xfrm/xfrm_sysctl.c
@@ -2,7 +2,7 @@
 #include <net/net_namespace.h>
 #include <net/xfrm.h>
 
-static void __xfrm_sysctl_init(struct net *net)
+static void __net_init __xfrm_sysctl_init(struct net *net)
 {
 	net->xfrm.sysctl_aevent_etime = XFRM_AE_ETIME;
 	net->xfrm.sysctl_aevent_rseqth = XFRM_AE_SEQT_SIZE;
@@ -64,7 +64,7 @@ out_kmemdup:
 	return -ENOMEM;
 }
 
-void xfrm_sysctl_fini(struct net *net)
+void __net_exit xfrm_sysctl_fini(struct net *net)
 {
 	struct ctl_table *table;
 
-- 
cgit v1.2.3


From a47430583dab67b23161b0e75226781deed50138 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Sun, 17 Jan 2010 07:30:43 +0000
Subject: bnx2: Refine statistics code.

Refine the statistics macros by passing in just the name of the
counter field.  This makes it a lot easier and cleaner to add
counters saved before the last reset in the next patch.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 62 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 32 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b1c20e5f7de8..47fb5086cf56 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6542,92 +6542,94 @@ bnx2_close(struct net_device *dev)
 	return 0;
 }
 
-#define GET_NET_STATS64(ctr)					\
+#define GET_64BIT_NET_STATS64(ctr)				\
 	(unsigned long) ((unsigned long) (ctr##_hi) << 32) +	\
 	(unsigned long) (ctr##_lo)
 
-#define GET_NET_STATS32(ctr)		\
+#define GET_64BIT_NET_STATS32(ctr)				\
 	(ctr##_lo)
 
 #if (BITS_PER_LONG == 64)
-#define GET_NET_STATS	GET_NET_STATS64
+#define GET_64BIT_NET_STATS(ctr)				\
+	GET_64BIT_NET_STATS64(bp->stats_blk->ctr)
 #else
-#define GET_NET_STATS	GET_NET_STATS32
+#define GET_64BIT_NET_STATS(ctr)				\
+	GET_64BIT_NET_STATS32(bp->stats_blk->ctr)
 #endif
 
+#define GET_32BIT_NET_STATS(ctr)				\
+	(unsigned long) (bp->stats_blk->ctr)
+
 static struct net_device_stats *
 bnx2_get_stats(struct net_device *dev)
 {
 	struct bnx2 *bp = netdev_priv(dev);
-	struct statistics_block *stats_blk = bp->stats_blk;
 	struct net_device_stats *net_stats = &dev->stats;
 
 	if (bp->stats_blk == NULL) {
 		return net_stats;
 	}
 	net_stats->rx_packets =
-		GET_NET_STATS(stats_blk->stat_IfHCInUcastPkts) +
-		GET_NET_STATS(stats_blk->stat_IfHCInMulticastPkts) +
-		GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts);
+		GET_64BIT_NET_STATS(stat_IfHCInUcastPkts) +
+		GET_64BIT_NET_STATS(stat_IfHCInMulticastPkts) +
+		GET_64BIT_NET_STATS(stat_IfHCInBroadcastPkts);
 
 	net_stats->tx_packets =
-		GET_NET_STATS(stats_blk->stat_IfHCOutUcastPkts) +
-		GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) +
-		GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts);
+		GET_64BIT_NET_STATS(stat_IfHCOutUcastPkts) +
+		GET_64BIT_NET_STATS(stat_IfHCOutMulticastPkts) +
+		GET_64BIT_NET_STATS(stat_IfHCOutBroadcastPkts);
 
 	net_stats->rx_bytes =
-		GET_NET_STATS(stats_blk->stat_IfHCInOctets);
+		GET_64BIT_NET_STATS(stat_IfHCInOctets);
 
 	net_stats->tx_bytes =
-		GET_NET_STATS(stats_blk->stat_IfHCOutOctets);
+		GET_64BIT_NET_STATS(stat_IfHCOutOctets);
 
 	net_stats->multicast =
-		GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts);
+		GET_64BIT_NET_STATS(stat_IfHCOutMulticastPkts);
 
 	net_stats->collisions =
-		(unsigned long) stats_blk->stat_EtherStatsCollisions;
+		GET_32BIT_NET_STATS(stat_EtherStatsCollisions);
 
 	net_stats->rx_length_errors =
-		(unsigned long) (stats_blk->stat_EtherStatsUndersizePkts +
-		stats_blk->stat_EtherStatsOverrsizePkts);
+		GET_32BIT_NET_STATS(stat_EtherStatsUndersizePkts) +
+		GET_32BIT_NET_STATS(stat_EtherStatsOverrsizePkts);
 
 	net_stats->rx_over_errors =
-		(unsigned long) (stats_blk->stat_IfInFTQDiscards +
-		stats_blk->stat_IfInMBUFDiscards);
+		GET_32BIT_NET_STATS(stat_IfInFTQDiscards) +
+		GET_32BIT_NET_STATS(stat_IfInMBUFDiscards);
 
 	net_stats->rx_frame_errors =
-		(unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors;
+		GET_32BIT_NET_STATS(stat_Dot3StatsAlignmentErrors);
 
 	net_stats->rx_crc_errors =
-		(unsigned long) stats_blk->stat_Dot3StatsFCSErrors;
+		GET_32BIT_NET_STATS(stat_Dot3StatsFCSErrors);
 
 	net_stats->rx_errors = net_stats->rx_length_errors +
 		net_stats->rx_over_errors + net_stats->rx_frame_errors +
 		net_stats->rx_crc_errors;
 
 	net_stats->tx_aborted_errors =
-    		(unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions +
-		stats_blk->stat_Dot3StatsLateCollisions);
+		GET_32BIT_NET_STATS(stat_Dot3StatsExcessiveCollisions) +
+		GET_32BIT_NET_STATS(stat_Dot3StatsLateCollisions);
 
 	if ((CHIP_NUM(bp) == CHIP_NUM_5706) ||
 	    (CHIP_ID(bp) == CHIP_ID_5708_A0))
 		net_stats->tx_carrier_errors = 0;
 	else {
 		net_stats->tx_carrier_errors =
-			(unsigned long)
-			stats_blk->stat_Dot3StatsCarrierSenseErrors;
+			GET_32BIT_NET_STATS(stat_Dot3StatsCarrierSenseErrors);
 	}
 
 	net_stats->tx_errors =
-    		(unsigned long)
-		stats_blk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors
-		+
+		GET_32BIT_NET_STATS(stat_emac_tx_stat_dot3statsinternalmactransmiterrors) +
 		net_stats->tx_aborted_errors +
 		net_stats->tx_carrier_errors;
 
 	net_stats->rx_missed_errors =
-		(unsigned long) (stats_blk->stat_IfInFTQDiscards +
-		stats_blk->stat_IfInMBUFDiscards + stats_blk->stat_FwRxDrop);
+		GET_32BIT_NET_STATS(stat_IfInFTQDiscards) +
+		GET_32BIT_NET_STATS(stat_IfInMBUFDiscards) +
+		GET_32BIT_NET_STATS(stat_FwRxDrop);
 
 	return net_stats;
 }
-- 
cgit v1.2.3


From 354fcd7774a00809ebefdba75e747364cb22a940 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Sun, 17 Jan 2010 07:30:44 +0000
Subject: bnx2: Save statistics during reset.

MTU changes, ring size changes, etc cause the chip to be reset and the
statisctics flushed.  To keep track of the accumulated statistics, we
add code to save the whole statistics block before reset.  We also
modify the macros and statistics functions to return the sum of the
saved and current counters.

Based on original patch by Breno Leitao <leitao@linux.vnet.ibm.com>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++-------
 drivers/net/bnx2.h |  1 +
 2 files changed, 57 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 47fb5086cf56..d83512d3e02f 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6231,6 +6231,8 @@ bnx2_open(struct net_device *dev)
 
 	atomic_set(&bp->intr_sem, 0);
 
+	memset(bp->temp_stats_blk, 0, sizeof(struct statistics_block));
+
 	bnx2_enable_int(bp);
 
 	if (bp->flags & BNX2_FLAG_USING_MSI) {
@@ -6542,6 +6544,30 @@ bnx2_close(struct net_device *dev)
 	return 0;
 }
 
+static void
+bnx2_save_stats(struct bnx2 *bp)
+{
+	u32 *hw_stats = (u32 *) bp->stats_blk;
+	u32 *temp_stats = (u32 *) bp->temp_stats_blk;
+	int i;
+
+	/* The 1st 10 counters are 64-bit counters */
+	for (i = 0; i < 20; i += 2) {
+		u32 hi;
+		u64 lo;
+
+		hi = *(temp_stats + i) + *(hw_stats + i);
+		lo = *(temp_stats + i + 1) + *(hw_stats + i + 1);
+		if (lo > 0xffffffff)
+			hi++;
+		*(temp_stats + i) = hi;
+		*(temp_stats + i + 1) = lo & 0xffffffff;
+	}
+
+	for ( ; i < sizeof(struct statistics_block) / 4; i++)
+		*(temp_stats + i) = *(temp_stats + i) + *(hw_stats + i);
+}
+
 #define GET_64BIT_NET_STATS64(ctr)				\
 	(unsigned long) ((unsigned long) (ctr##_hi) << 32) +	\
 	(unsigned long) (ctr##_lo)
@@ -6551,14 +6577,17 @@ bnx2_close(struct net_device *dev)
 
 #if (BITS_PER_LONG == 64)
 #define GET_64BIT_NET_STATS(ctr)				\
-	GET_64BIT_NET_STATS64(bp->stats_blk->ctr)
+	GET_64BIT_NET_STATS64(bp->stats_blk->ctr) +		\
+	GET_64BIT_NET_STATS64(bp->temp_stats_blk->ctr)
 #else
 #define GET_64BIT_NET_STATS(ctr)				\
-	GET_64BIT_NET_STATS32(bp->stats_blk->ctr)
+	GET_64BIT_NET_STATS32(bp->stats_blk->ctr) +		\
+	GET_64BIT_NET_STATS32(bp->temp_stats_blk->ctr)
 #endif
 
 #define GET_32BIT_NET_STATS(ctr)				\
-	(unsigned long) (bp->stats_blk->ctr)
+	(unsigned long) (bp->stats_blk->ctr +			\
+			 bp->temp_stats_blk->ctr)
 
 static struct net_device_stats *
 bnx2_get_stats(struct net_device *dev)
@@ -7089,6 +7118,9 @@ static int
 bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx)
 {
 	if (netif_running(bp->dev)) {
+		/* Reset will erase chipset stats; save them */
+		bnx2_save_stats(bp);
+
 		bnx2_netif_stop(bp);
 		bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
 		bnx2_free_skbs(bp);
@@ -7433,6 +7465,7 @@ bnx2_get_ethtool_stats(struct net_device *dev,
 	struct bnx2 *bp = netdev_priv(dev);
 	int i;
 	u32 *hw_stats = (u32 *) bp->stats_blk;
+	u32 *temp_stats = (u32 *) bp->temp_stats_blk;
 	u8 *stats_len_arr = NULL;
 
 	if (hw_stats == NULL) {
@@ -7449,21 +7482,26 @@ bnx2_get_ethtool_stats(struct net_device *dev,
 		stats_len_arr = bnx2_5708_stats_len_arr;
 
 	for (i = 0; i < BNX2_NUM_STATS; i++) {
+		unsigned long offset;
+
 		if (stats_len_arr[i] == 0) {
 			/* skip this counter */
 			buf[i] = 0;
 			continue;
 		}
+
+		offset = bnx2_stats_offset_arr[i];
 		if (stats_len_arr[i] == 4) {
 			/* 4-byte counter */
-			buf[i] = (u64)
-				*(hw_stats + bnx2_stats_offset_arr[i]);
+			buf[i] = (u64) *(hw_stats + offset) +
+				 *(temp_stats + offset);
 			continue;
 		}
 		/* 8-byte counter */
-		buf[i] = (((u64) *(hw_stats +
-					bnx2_stats_offset_arr[i])) << 32) +
-				*(hw_stats + bnx2_stats_offset_arr[i] + 1);
+		buf[i] = (((u64) *(hw_stats + offset)) << 32) +
+			 *(hw_stats + offset + 1) +
+			 (((u64) *(temp_stats + offset)) << 32) +
+			 *(temp_stats + offset + 1);
 	}
 }
 
@@ -7831,6 +7869,14 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->flags = 0;
 	bp->phy_flags = 0;
 
+	bp->temp_stats_blk =
+		kzalloc(sizeof(struct statistics_block), GFP_KERNEL);
+
+	if (bp->temp_stats_blk == NULL) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
 	/* enable device (incl. PCI PM wakeup), and bus-mastering */
 	rc = pci_enable_device(pdev);
 	if (rc) {
@@ -8352,6 +8398,8 @@ bnx2_remove_one(struct pci_dev *pdev)
 	if (bp->regview)
 		iounmap(bp->regview);
 
+	kfree(bp->temp_stats_blk);
+
 	free_netdev(dev);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 939dc44d50a0..b860fbbff355 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6851,6 +6851,7 @@ struct bnx2 {
 	dma_addr_t		status_blk_mapping;
 
 	struct statistics_block	*stats_blk;
+	struct statistics_block	*temp_stats_blk;
 	dma_addr_t		stats_blk_mapping;
 
 	int			ctx_pages;
-- 
cgit v1.2.3


From 2ae3111eafd797e24cc390bb5ce6a8fa0deacdb2 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 18 Jan 2010 00:29:19 -0800
Subject: drivers/net: Eliminate useless code

The variable qdev is initialized twice to the same (side effect-free)
expression.  Drop one initialization.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@

x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qla3xxx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index f922294fd349..4ef0afbcbe1b 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -4087,7 +4087,6 @@ static void __devexit ql3xxx_remove(struct pci_dev *pdev)
 	struct ql3_adapter *qdev = netdev_priv(ndev);
 
 	unregister_netdev(ndev);
-	qdev = netdev_priv(ndev);
 
 	ql_disable_interrupts(qdev);
 
-- 
cgit v1.2.3


From 1152dcc28c66a74b5b3f1a3ede0aa6729bfd48e4 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:42:58 -0800
Subject: iwlwifi: Fix throughput stall issue in HT mode for 5000

Similar to 6000 and 1000 series, RTS/CTS is the recommended protection
mechanism for 5000 series in HT mode based on the HW design.

Using RTS/CTS will better protect the inner exchange from interference,
especially in highly-congested environment, it also prevent uCode encounter
TX FIFO underrun and other HT mode related performance issues.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-5000.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 33a5866538e7..de45f308b744 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1598,6 +1598,7 @@ struct iwl_cfg iwl5300_agn_cfg = {
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
@@ -1622,6 +1623,7 @@ struct iwl_cfg iwl5100_bgn_cfg = {
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
@@ -1667,6 +1669,7 @@ struct iwl_cfg iwl5100_agn_cfg = {
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
@@ -1691,6 +1694,7 @@ struct iwl_cfg iwl5350_agn_cfg = {
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
@@ -1715,6 +1719,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
-- 
cgit v1.2.3


From bb5d2db5709e469f4a8c01eaaee9a275ed9772aa Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 15 Jan 2010 13:42:59 -0800
Subject: iwlwifi: add license to tracing files

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-devtrace.c | 26 ++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-devtrace.h | 26 ++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
index e7d88d1da15d..83cc4e500a96 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
@@ -1,3 +1,29 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
 #include <linux/module.h>
 
 /* sparse doesn't like tracepoint macros */
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index 21361968ab7e..d9c7363b1bbb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -1,3 +1,29 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
 #if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ)
 #define __IWLWIFI_DEVICE_TRACE
 
-- 
cgit v1.2.3


From f5300e04df78feae8107c1846dd3a9e27c071b2f Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Mon, 18 Jan 2010 00:07:38 +0100
Subject: p54pci: rx frame length check

A long time ago, a user reported several crashes due to
data corruptions which are likely the result of a
not-100%-supported, or faulty? PCI bridge.
( http://patchwork.kernel.org/patch/53004/ )

This patch fixes entry #1.
"1.  p54p_check_rx_ring - skb_over_panic: Under a ping flood
or just left running for a bit would panic with a skb_over_panic."
As described in the mail: The invalid frame length causes
skb_put to bailout and trigger a crash.

Note:
Simply dropping the frame is problematic, because if its content
contains a tx feedback we would lose some portion of the device
memory space.... And the driver/mac80211 should handle all other
invalid data.

Reported-by: Quintin Pitts <geek4linux@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54pci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index a15962a19b2a..a72f7c2577de 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -197,6 +197,14 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
 			i %= ring_limit;
 			continue;
 		}
+
+		if (unlikely(len > priv->common.rx_mtu)) {
+			if (net_ratelimit())
+				dev_err(&priv->pdev->dev, "rx'd frame size "
+					"exceeds length threshold.\n");
+
+			len = priv->common.rx_mtu;
+		}
 		skb_put(skb, len);
 
 		if (p54_rx(dev, skb)) {
-- 
cgit v1.2.3


From ad580db50ee8dccd069ffcd76d6f70fa6d4a62a8 Mon Sep 17 00:00:00 2001
From: Hin-Tak Leung <hintak.leung@gmail.com>
Date: Mon, 18 Jan 2010 01:24:11 +0000
Subject: zd1211rw: adding 0409:0248 to supported device list

Yasuhiro ABE <yadiary@gmail.com> reported success in sourceforge zd1211-dev list.
The device is a NEC Aterm WL54GU usb wireless stick.

The brand and retail product name
    NEC, Aterm PA-WL54GU
The USB ID's (duh)
    ID 0409:0248
The chip ID string
    zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N-
The FCC ID
    unknown

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Yasuhiro ABE <yadiary@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1211rw/zd_usb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ac19ecd19cfe..72d3e437e190 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -62,6 +62,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
 	{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
-- 
cgit v1.2.3


From 4f9c85a1b03bfa5c0a0d8488a3a7766f3c9fb756 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Mon, 18 Jan 2010 05:37:16 +0000
Subject: phylib: Move workqueue initialization to a proper place

commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock
on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume:

 PM: resume of devices complete after 237.098 msecs
 Restarting tasks ... done.
 kernel BUG at kernel/workqueue.c:354!
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 [...]
 Backtrace:
 [<c002c598>] (__bug+0x0/0x2c) from [<c0052a54>] (queue_delayed_work_on+0x74/0xf8)
 [<c00529e0>] (queue_delayed_work_on+0x0/0xf8) from [<c0052b30>] (queue_delayed_work+0x2c/0x30)

The oops pops up because TI DaVinci EMAC driver detaches PHY on
suspend and attaches it back on resume. Attaching makes phylib call
phy_start_machine() that initializes a workqueue. On the other hand,
PHY's resume routine will call phy_start_machine() again, and that
will cause the oops since we just destroyed the already scheduled
workqueue.

This patch fixes the issue by moving workqueue initialization to
phy_device_create().

p.s. We don't see this oops with ucc_geth and gianfar drivers because
they perform a fine-grained suspend, i.e. they just stop the PHYs
without detaching.

Reported-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy.c        | 4 +---
 drivers/net/phy/phy_device.c | 1 +
 include/linux/phy.h          | 1 +
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index b0e9f9c51721..0295097d6c44 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -410,7 +410,6 @@ EXPORT_SYMBOL(phy_start_aneg);
 
 
 static void phy_change(struct work_struct *work);
-static void phy_state_machine(struct work_struct *work);
 
 /**
  * phy_start_machine - start PHY state machine tracking
@@ -430,7 +429,6 @@ void phy_start_machine(struct phy_device *phydev,
 {
 	phydev->adjust_state = handler;
 
-	INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine);
 	schedule_delayed_work(&phydev->state_queue, HZ);
 }
 
@@ -761,7 +759,7 @@ EXPORT_SYMBOL(phy_start);
  * phy_state_machine - Handle the state machine
  * @work: work_struct that describes the work to be done
  */
-static void phy_state_machine(struct work_struct *work)
+void phy_state_machine(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct phy_device *phydev =
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8212b2b93422..adbc0fded130 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -177,6 +177,7 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 	dev->state = PHY_DOWN;
 
 	mutex_init(&dev->lock);
+	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
 
 	return dev;
 }
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7968defd2fa7..6a7eb402165d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -485,6 +485,7 @@ void phy_driver_unregister(struct phy_driver *drv);
 int phy_driver_register(struct phy_driver *new_driver);
 void phy_prepare_link(struct phy_device *phydev,
 		void (*adjust_link)(struct net_device *));
+void phy_state_machine(struct work_struct *work);
 void phy_start_machine(struct phy_device *phydev,
 		void (*handler)(struct net_device *));
 void phy_stop_machine(struct phy_device *phydev);
-- 
cgit v1.2.3


From 34692421bc7d6145ef383b014860f4fde10b7505 Mon Sep 17 00:00:00 2001
From: Jiajun Wu <b06378@freescale.com>
Date: Mon, 18 Jan 2010 05:47:50 +0000
Subject: ucc_geth: Fix full TX queue processing

commit 7583605b6d29f1f7f6fc505b883328089f3485ad ("ucc_geth: Fix empty
TX queue processing") fixed empty TX queue mishandling, but didn't
account another corner case: when TX queue becomes full.

Without this patch the driver will stop transmiting when TX queue
becomes full since 'bd == ugeth->txBd[txQ]' actually checks for
two things: queue empty or full.

Let's better check for NULL skb, which unambiguously signals an empty
queue.

Signed-off-by: Jiajun Wu <b06378@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Stable <stable@vger.kernel.org> [2.6.32]
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 96bdc0b43889..eb8fe7e16c6c 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3279,13 +3279,12 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ)
 		/* Handle the transmitted buffer and release */
 		/* the BD to be used with the current frame  */
 
-		if (bd == ugeth->txBd[txQ]) /* queue empty? */
+		skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
+		if (!skb)
 			break;
 
 		dev->stats.tx_packets++;
 
-		skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
-
 		if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN &&
 			     skb_recycle_check(skb,
 				    ugeth->ug_info->uf_info.max_rx_buf_length +
-- 
cgit v1.2.3


From 357d46a17e54c9a87e0e6ef3930ff4ab2d232b81 Mon Sep 17 00:00:00 2001
From: Matthew Slattery <mslattery@solarflare.com>
Date: Mon, 18 Jan 2010 05:47:16 +0000
Subject: sfc: QT202x: Remove unreliable MMD check at initialisation

Checking the PHY XS MMD here is unnecessary and can give false negatives.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/qt202x_phy.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index ff8f0a417fa3..e0d13a451019 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -318,12 +318,6 @@ static int qt202x_reset_phy(struct efx_nic *efx)
 	/* Wait 250ms for the PHY to complete bootup */
 	msleep(250);
 
-	/* Check that all the MMDs we expect are present and responding. We
-	 * expect faults on some if the link is down, but not on the PHY XS */
-	rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
-	if (rc < 0)
-		goto fail;
-
 	falcon_board(efx)->type->init_phy(efx);
 
 	return rc;
-- 
cgit v1.2.3


From 98f672ca9978c6e5997dbe905c91a73593148a7e Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 18 Jan 2010 21:14:12 +0000
Subject: bfin_mac: use the newer CLKBUFOE bit name via asm/dpmc.h

This driver tweaks VR_CTL, so pull in the header for the bit defines.
Also switch to the new define name as the old one has gone away.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bfin_mac.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 8ffea3990d07..0b23bc4f56c6 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -33,6 +33,7 @@
 #include <asm/dma.h>
 #include <linux/dma-mapping.h>
 
+#include <asm/dpmc.h>
 #include <asm/blackfin.h>
 #include <asm/cacheflush.h>
 #include <asm/portmux.h>
@@ -386,8 +387,8 @@ static int mii_probe(struct net_device *dev)
 	u32 sclk, mdc_div;
 
 	/* Enable PHY output early */
-	if (!(bfin_read_VR_CTL() & PHYCLKOE))
-		bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
+	if (!(bfin_read_VR_CTL() & CLKBUFOE))
+		bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
 
 	sclk = get_sclk();
 	mdc_div = ((sclk / MDC_CLK) / 2) - 1;
-- 
cgit v1.2.3


From fa44a73cc766c7f3bac71a66d564e0049b800325 Mon Sep 17 00:00:00 2001
From: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Date: Mon, 18 Jan 2010 12:59:55 +0000
Subject: ppp_generic.c severly whitespace damanged by
 9c705260feea6ae329bc6b6d5f6d2ef0227eda0a

I was just looking at ppp_generic, and noticed that it fairly recently
(as in the last year) got rather mangled with many spaces turned into tabs
in places they very much shouldn't have been.  I tracked it down to commit
9c705260feea6ae329bc6b6d5f6d2ef0227eda0a (ppp: ppp_mp_explode() redesign).

I am amazed if that patch passed the patch checking script.  I have no
idea what kind of weird editor setting did this, but it has to have been a
weird editor setting or a very unfortunate search and replace gone wrong.
I only found it trying to apply a patch I was playing with and wondering
why it wouldn't apply.  Then I found there were tabs in the middle of
comments that used to be spaces.

Well here is a patch that should fix it up as far as I can tell.

Purely whitespace repair.  No actual code changes.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ppp_generic.c | 122 +++++++++++++++++++++++-----------------------
 1 file changed, 61 insertions(+), 61 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 2282e729edbe..6d61602208c1 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -167,7 +167,7 @@ struct channel {
 	u8		avail;		/* flag used in multilink stuff */
 	u8		had_frag;	/* >= 1 fragments have been sent */
 	u32		lastseq;	/* MP: last sequence # received */
-	int     speed;		/* speed of the corresponding ppp channel*/
+	int		speed;		/* speed of the corresponding ppp channel*/
 #endif /* CONFIG_PPP_MULTILINK */
 };
 
@@ -1293,13 +1293,13 @@ ppp_push(struct ppp *ppp)
  */
 static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 {
-	int	len, totlen;
-	int	i, bits, hdrlen, mtu;
-	int	flen;
-	int	navail,	nfree, nzero;
-	int	nbigger;
-	int	totspeed;
-	int	totfree;
+	int len, totlen;
+	int i, bits, hdrlen, mtu;
+	int flen;
+	int navail, nfree, nzero;
+	int nbigger;
+	int totspeed;
+	int totfree;
 	unsigned char *p, *q;
 	struct list_head *list;
 	struct channel *pch;
@@ -1307,21 +1307,21 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 	struct ppp_channel *chan;
 
 	totspeed = 0; /*total bitrate of the bundle*/
-	nfree =	0;	/* # channels which	have no	packet already queued */
-	navail = 0;	/* total # of usable channels (not deregistered) */
-	nzero =	0; /* number of	channels with zero speed associated*/
-	totfree	= 0; /*total # of channels available and
+	nfree = 0; /* # channels which have no packet already queued */
+	navail = 0; /* total # of usable channels (not deregistered) */
+	nzero = 0; /* number of channels with zero speed associated*/
+	totfree = 0; /*total # of channels available and
 				  *having no queued packets before
 				  *starting the fragmentation*/
 
 	hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN;
-	i =	0;
-	list_for_each_entry(pch, &ppp->channels, clist)	{
+	i = 0;
+	list_for_each_entry(pch, &ppp->channels, clist) {
 		navail += pch->avail = (pch->chan != NULL);
 		pch->speed = pch->chan->speed;
-		if (pch->avail)	{
+		if (pch->avail) {
 			if (skb_queue_empty(&pch->file.xq) ||
-				!pch->had_frag)	{
+				!pch->had_frag) {
 					if (pch->speed == 0)
 						nzero++;
 					else
@@ -1331,60 +1331,60 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 					++nfree;
 					++totfree;
 				}
-			if (!pch->had_frag && i	< ppp->nxchan)
-				ppp->nxchan	= i;
+			if (!pch->had_frag && i < ppp->nxchan)
+				ppp->nxchan = i;
 		}
 		++i;
 	}
 	/*
-	 * Don't start sending this	packet unless at least half	of
-	 * the channels	are	free.  This	gives much better TCP
-	 * performance if we have a	lot	of channels.
+	 * Don't start sending this packet unless at least half of
+	 * the channels are free.  This gives much better TCP
+	 * performance if we have a lot of channels.
 	 */
-	if (nfree == 0 || nfree	< navail / 2)
-		return 0; /* can't take now, leave it in xmit_pending	*/
+	if (nfree == 0 || nfree < navail / 2)
+		return 0; /* can't take now, leave it in xmit_pending */
 
 	/* Do protocol field compression (XXX this should be optional) */
-	p =	skb->data;
-	len	= skb->len;
+	p = skb->data;
+	len = skb->len;
 	if (*p == 0) {
 		++p;
 		--len;
 	}
 
 	totlen = len;
-	nbigger	= len %	nfree;
+	nbigger = len % nfree;
 
-	/* skip	to the channel after the one we	last used
-	   and start at	that one */
+	/* skip to the channel after the one we last used
+	   and start at that one */
 	list = &ppp->channels;
-	for	(i = 0;	i <	ppp->nxchan; ++i) {
+	for (i = 0; i < ppp->nxchan; ++i) {
 		list = list->next;
-		if (list ==	&ppp->channels)	{
-			i =	0;
+		if (list == &ppp->channels) {
+			i = 0;
 			break;
 		}
 	}
 
-	/* create a	fragment for each channel */
+	/* create a fragment for each channel */
 	bits = B;
-	while (len	> 0) {
+	while (len > 0) {
 		list = list->next;
-		if (list ==	&ppp->channels)	{
-			i =	0;
+		if (list == &ppp->channels) {
+			i = 0;
 			continue;
 		}
-		pch	= list_entry(list, struct channel, clist);
+		pch = list_entry(list, struct channel, clist);
 		++i;
 		if (!pch->avail)
 			continue;
 
 		/*
-		 * Skip	this channel if	it has a fragment pending already and
-		 * we haven't given	a fragment to all of the free channels.
+		 * Skip this channel if it has a fragment pending already and
+		 * we haven't given a fragment to all of the free channels.
 		 */
 		if (pch->avail == 1) {
-			if (nfree >	0)
+			if (nfree > 0)
 				continue;
 		} else {
 			pch->avail = 1;
@@ -1393,32 +1393,32 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 		/* check the channel's mtu and whether it is still attached. */
 		spin_lock_bh(&pch->downl);
 		if (pch->chan == NULL) {
-			/* can't use this channel, it's	being deregistered */
+			/* can't use this channel, it's being deregistered */
 			if (pch->speed == 0)
 				nzero--;
 			else
-				totspeed -=	pch->speed;
+				totspeed -= pch->speed;
 
 			spin_unlock_bh(&pch->downl);
 			pch->avail = 0;
 			totlen = len;
 			totfree--;
 			nfree--;
-			if (--navail ==	0)
+			if (--navail == 0)
 				break;
 			continue;
 		}
 
 		/*
 		*if the channel speed is not set divide
-		*the packet	evenly among the free channels;
+		*the packet evenly among the free channels;
 		*otherwise divide it according to the speed
 		*of the channel we are going to transmit on
 		*/
 		flen = len;
 		if (nfree > 0) {
 			if (pch->speed == 0) {
-				flen = totlen/nfree	;
+				flen = totlen/nfree;
 				if (nbigger > 0) {
 					flen++;
 					nbigger--;
@@ -1436,8 +1436,8 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 		}
 
 		/*
-		 *check	if we are on the last channel or
-		 *we exceded the lenght	of the data	to
+		 *check if we are on the last channel or
+		 *we exceded the lenght of the data to
 		 *fragment
 		 */
 		if ((nfree <= 0) || (flen > len))
@@ -1448,29 +1448,29 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 		 *above formula will be equal or less than zero.
 		 *Skip the channel in this case
 		 */
-		if (flen <=	0) {
+		if (flen <= 0) {
 			pch->avail = 2;
 			spin_unlock_bh(&pch->downl);
 			continue;
 		}
 
-		mtu	= pch->chan->mtu - hdrlen;
-		if (mtu	< 4)
-			mtu	= 4;
+		mtu = pch->chan->mtu - hdrlen;
+		if (mtu < 4)
+			mtu = 4;
 		if (flen > mtu)
 			flen = mtu;
-		if (flen ==	len)
-			bits |=	E;
-		frag = alloc_skb(flen +	hdrlen + (flen == 0), GFP_ATOMIC);
+		if (flen == len)
+			bits |= E;
+		frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC);
 		if (!frag)
 			goto noskb;
-		q =	skb_put(frag, flen + hdrlen);
+		q = skb_put(frag, flen + hdrlen);
 
-		/* make	the	MP header */
+		/* make the MP header */
 		q[0] = PPP_MP >> 8;
 		q[1] = PPP_MP;
 		if (ppp->flags & SC_MP_XSHORTSEQ) {
-			q[2] = bits	+ ((ppp->nxseq >> 8) & 0xf);
+			q[2] = bits + ((ppp->nxseq >> 8) & 0xf);
 			q[3] = ppp->nxseq;
 		} else {
 			q[2] = bits;
@@ -1483,24 +1483,24 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 
 		/* try to send it down the channel */
 		chan = pch->chan;
-		if (!skb_queue_empty(&pch->file.xq)	||
+		if (!skb_queue_empty(&pch->file.xq) ||
 			!chan->ops->start_xmit(chan, frag))
 			skb_queue_tail(&pch->file.xq, frag);
-		pch->had_frag =	1;
+		pch->had_frag = 1;
 		p += flen;
-		len	-= flen;
+		len -= flen;
 		++ppp->nxseq;
 		bits = 0;
 		spin_unlock_bh(&pch->downl);
 	}
-	ppp->nxchan	= i;
+	ppp->nxchan = i;
 
 	return 1;
 
  noskb:
 	spin_unlock_bh(&pch->downl);
 	if (ppp->debug & 1)
-		printk(KERN_ERR	"PPP: no memory	(fragment)\n");
+		printk(KERN_ERR "PPP: no memory (fragment)\n");
 	++ppp->dev->stats.tx_errors;
 	++ppp->nxseq;
 	return 1;	/* abandon the frame */
-- 
cgit v1.2.3


From 2d146eb172d5f754e3973a3f761f7619ebb12df9 Mon Sep 17 00:00:00 2001
From: Ram Vepa <ram.vepa@neterion.com>
Date: Tue, 19 Jan 2010 12:36:20 -0800
Subject: S2io: two branches the same in wait_for_cmd_complete()

Fix check to verify if a register bit is set. We have not hit this bug because
wait_for_cmd_complete() is always called with S2IO_BIT_RESET.
Reported by Roel Kluin <roel.kluin@gmail.com>.

Signed-off-by: Ram Vepa <ram.vepa@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/s2io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index cc4218667cba..3c4836d0898f 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3421,7 +3421,7 @@ static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
 				break;
 			}
 		} else {
-			if (!(val64 & busy_bit)) {
+			if (val64 & busy_bit) {
 				ret = SUCCESS;
 				break;
 			}
-- 
cgit v1.2.3


From 9ed333e0298c8f12cf7f3b4aec4258e81ef588a0 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:33 -0800
Subject: iwlwifi: fix clear statistics counter command

When receive reply statistics command with "clear" mask, just reset the
accumulated statistics counters, but not the current statistics counters,
so the accumulated statistics counter can provide the correct
information.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-rx.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 6f36b6e79f5e..10db97327452 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -638,8 +638,6 @@ void iwl_reply_statistics(struct iwl_priv *priv,
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 
 	if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATISTICS_CLEAR_MSK) {
-		memset(&priv->statistics, 0,
-			sizeof(struct iwl_notif_statistics));
 #ifdef CONFIG_IWLWIFI_DEBUG
 		memset(&priv->accum_statistics, 0,
 			sizeof(struct iwl_notif_statistics));
-- 
cgit v1.2.3


From e3ef2164386a13a37714ec033e30811d052c7999 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:34 -0800
Subject: iwlwifi: format and show statistics counter from uCode

To help debug uCode related problem, adding "delta" and "max"
information in debugfs statistics counters display.

Those information show the delta between two statistics report from
uCode, user can monitor the counters for any "un-normal" behavior.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Jay Sternberg<jay.e.sternberg@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 850 ++++++++++++++++++-----------
 drivers/net/wireless/iwlwifi/iwl-dev.h     |   2 +
 drivers/net/wireless/iwlwifi/iwl-rx.c      |  19 +-
 3 files changed, 545 insertions(+), 326 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 4a2ac9311ba8..2264cbd95a00 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1081,6 +1081,12 @@ static int iwl_dbgfs_statistics_flag(struct iwl_priv *priv, char *buf,
 	return p;
 }
 
+static const char ucode_stats_header[] =
+	"%-32s     current  acumulative       delta         max\n";
+static const char ucode_stats_short_format[] =
+	"  %-30s %10u\n";
+static const char ucode_stats_format[] =
+	"  %-30s %10u  %10u  %10u  %10u\n";
 
 static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
 					char __user *user_buf,
@@ -1089,14 +1095,15 @@ static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
 	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
-	int bufsz = sizeof(struct statistics_rx_phy) * 20 +
-		sizeof(struct statistics_rx_non_phy) * 20 +
-		sizeof(struct statistics_rx_ht_phy) * 20 + 400;
+	int bufsz = sizeof(struct statistics_rx_phy) * 40 +
+		sizeof(struct statistics_rx_non_phy) * 40 +
+		sizeof(struct statistics_rx_ht_phy) * 40 + 400;
 	ssize_t ret;
-	struct statistics_rx_phy *ofdm, *accum_ofdm;
-	struct statistics_rx_phy *cck, *accum_cck;
+	struct statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
+	struct statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
 	struct statistics_rx_non_phy *general, *accum_general;
-	struct statistics_rx_ht_phy *ht, *accum_ht;
+	struct statistics_rx_non_phy *delta_general, *max_general;
+	struct statistics_rx_ht_phy *ht, *accum_ht, *delta_ht, *max_ht;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -1129,267 +1136,401 @@ static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
 	accum_cck = &priv->accum_statistics.rx.cck;
 	accum_general = &priv->accum_statistics.rx.general;
 	accum_ht = &priv->accum_statistics.rx.ofdm_ht;
+	delta_ofdm = &priv->delta_statistics.rx.ofdm;
+	delta_cck = &priv->delta_statistics.rx.cck;
+	delta_general = &priv->delta_statistics.rx.general;
+	delta_ht = &priv->delta_statistics.rx.ofdm_ht;
+	max_ofdm = &priv->max_delta.rx.ofdm;
+	max_cck = &priv->max_delta.rx.cck;
+	max_general = &priv->max_delta.rx.general;
+	max_ht = &priv->max_delta.rx.ofdm_ht;
+
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
-	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM:\n");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"\t\t\tcurrent\t\t\taccumulative\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ofdm->ina_cnt), accum_ofdm->ina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err);
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "overrun_err:\t\t%u\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_header,
+			 "Statistics_Rx - OFDM:");
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "ina_cnt:", le32_to_cpu(ofdm->ina_cnt),
+			 accum_ofdm->ina_cnt,
+			 delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "fina_cnt:",
+			 le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
+			 delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "plcp_err:",
+			 le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
+			 delta_ofdm->plcp_err, max_ofdm->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "crc32_err:",
+			 le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
+			 delta_ofdm->crc32_err, max_ofdm->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "overrun_err:",
 			 le32_to_cpu(ofdm->overrun_err),
-			 accum_ofdm->overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 accum_ofdm->overrun_err,
+			 delta_ofdm->overrun_err, max_ofdm->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "early_overrun_err:",
 			 le32_to_cpu(ofdm->early_overrun_err),
-			 accum_ofdm->early_overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->early_overrun_err,
+			 delta_ofdm->early_overrun_err,
+			 max_ofdm->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "crc32_good:",
 			 le32_to_cpu(ofdm->crc32_good),
-			 accum_ofdm->crc32_good);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "false_alarm_cnt:\t%u\t\t\t%u\n",
+			 accum_ofdm->crc32_good,
+			 delta_ofdm->crc32_good, max_ofdm->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "false_alarm_cnt:",
 			 le32_to_cpu(ofdm->false_alarm_cnt),
-			 accum_ofdm->false_alarm_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "fina_sync_err_cnt:\t%u\t\t\t%u\n",
+			 accum_ofdm->false_alarm_cnt,
+			 delta_ofdm->false_alarm_cnt,
+			 max_ofdm->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "fina_sync_err_cnt:",
 			 le32_to_cpu(ofdm->fina_sync_err_cnt),
-			 accum_ofdm->fina_sync_err_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sfd_timeout:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->fina_sync_err_cnt,
+			 delta_ofdm->fina_sync_err_cnt,
+			 max_ofdm->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sfd_timeout:",
 			 le32_to_cpu(ofdm->sfd_timeout),
-			 accum_ofdm->sfd_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "fina_timeout:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->sfd_timeout,
+			 delta_ofdm->sfd_timeout,
+			 max_ofdm->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "fina_timeout:",
 			 le32_to_cpu(ofdm->fina_timeout),
-			 accum_ofdm->fina_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "unresponded_rts:\t%u\t\t\t%u\n",
+			 accum_ofdm->fina_timeout,
+			 delta_ofdm->fina_timeout,
+			 max_ofdm->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "unresponded_rts:",
 			 le32_to_cpu(ofdm->unresponded_rts),
-			 accum_ofdm->unresponded_rts);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"rxe_frame_lmt_ovrun:\t%u\t\t\t%u\n",
+			 accum_ofdm->unresponded_rts,
+			 delta_ofdm->unresponded_rts,
+			 max_ofdm->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"rxe_frame_lmt_ovrun:",
 			 le32_to_cpu(ofdm->rxe_frame_limit_overrun),
-			 accum_ofdm->rxe_frame_limit_overrun);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sent_ack_cnt:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->rxe_frame_limit_overrun,
+			 delta_ofdm->rxe_frame_limit_overrun,
+			 max_ofdm->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sent_ack_cnt:",
 			 le32_to_cpu(ofdm->sent_ack_cnt),
-			 accum_ofdm->sent_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sent_cts_cnt:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->sent_ack_cnt,
+			 delta_ofdm->sent_ack_cnt,
+			 max_ofdm->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sent_cts_cnt:",
 			 le32_to_cpu(ofdm->sent_cts_cnt),
-			 accum_ofdm->sent_cts_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sent_ba_rsp_cnt:\t%u\t\t\t%u\n",
+			 accum_ofdm->sent_cts_cnt,
+			 delta_ofdm->sent_cts_cnt, max_ofdm->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sent_ba_rsp_cnt:",
 			 le32_to_cpu(ofdm->sent_ba_rsp_cnt),
-			 accum_ofdm->sent_ba_rsp_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "dsp_self_kill:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->sent_ba_rsp_cnt,
+			 delta_ofdm->sent_ba_rsp_cnt,
+			 max_ofdm->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "dsp_self_kill:",
 			 le32_to_cpu(ofdm->dsp_self_kill),
-			 accum_ofdm->dsp_self_kill);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->dsp_self_kill,
+			 delta_ofdm->dsp_self_kill,
+			 max_ofdm->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "mh_format_err:",
 			 le32_to_cpu(ofdm->mh_format_err),
-			 accum_ofdm->mh_format_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "re_acq_main_rssi_sum:\t%u\t\t\t%u\n",
+			 accum_ofdm->mh_format_err,
+			 delta_ofdm->mh_format_err,
+			 max_ofdm->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "re_acq_main_rssi_sum:",
 			 le32_to_cpu(ofdm->re_acq_main_rssi_sum),
-			 accum_ofdm->re_acq_main_rssi_sum);
-
-	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - CCK:\n");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"\t\t\tcurrent\t\t\taccumulative\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(cck->plcp_err), accum_cck->plcp_err);
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(cck->crc32_err), accum_cck->crc32_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 accum_ofdm->re_acq_main_rssi_sum,
+			 delta_ofdm->re_acq_main_rssi_sum,
+			max_ofdm->re_acq_main_rssi_sum);
+
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_header,
+			 "Statistics_Rx - CCK:");
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "ina_cnt:",
+			 le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
+			 delta_cck->ina_cnt, max_cck->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "fina_cnt:",
+			 le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
+			 delta_cck->fina_cnt, max_cck->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "plcp_err:",
+			 le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
+			 delta_cck->plcp_err, max_cck->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "crc32_err:",
+			 le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
+			 delta_cck->crc32_err, max_cck->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "overrun_err:",
 			 le32_to_cpu(cck->overrun_err),
-			 accum_cck->overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 accum_cck->overrun_err,
+			 delta_cck->overrun_err, max_cck->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "early_overrun_err:",
 			 le32_to_cpu(cck->early_overrun_err),
-			 accum_cck->early_overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(cck->crc32_good), accum_cck->crc32_good);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "false_alarm_cnt:\t%u\t\t\t%u\n",
+			 accum_cck->early_overrun_err,
+			 delta_cck->early_overrun_err,
+			 max_cck->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "crc32_good:",
+			 le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
+			 delta_cck->crc32_good,
+			 max_cck->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "false_alarm_cnt:",
 			 le32_to_cpu(cck->false_alarm_cnt),
-			 accum_cck->false_alarm_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "fina_sync_err_cnt:\t%u\t\t\t%u\n",
+			 accum_cck->false_alarm_cnt,
+			 delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "fina_sync_err_cnt:",
 			 le32_to_cpu(cck->fina_sync_err_cnt),
-			 accum_cck->fina_sync_err_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sfd_timeout:\t\t%u\t\t\t%u\n",
+			 accum_cck->fina_sync_err_cnt,
+			 delta_cck->fina_sync_err_cnt,
+			 max_cck->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sfd_timeout:",
 			 le32_to_cpu(cck->sfd_timeout),
-			 accum_cck->sfd_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "fina_timeout:\t\t%u\t\t\t%u\n",
+			 accum_cck->sfd_timeout,
+			 delta_cck->sfd_timeout, max_cck->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "fina_timeout:",
 			 le32_to_cpu(cck->fina_timeout),
-			 accum_cck->fina_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "unresponded_rts:\t%u\t\t\t%u\n",
+			 accum_cck->fina_timeout,
+			 delta_cck->fina_timeout, max_cck->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "unresponded_rts:",
 			 le32_to_cpu(cck->unresponded_rts),
-			 accum_cck->unresponded_rts);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"rxe_frame_lmt_ovrun:\t%u\t\t\t%u\n",
+			 accum_cck->unresponded_rts,
+			 delta_cck->unresponded_rts,
+			 max_cck->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"rxe_frame_lmt_ovrun:",
 			 le32_to_cpu(cck->rxe_frame_limit_overrun),
-			 accum_cck->rxe_frame_limit_overrun);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sent_ack_cnt:\t\t%u\t\t\t%u\n",
+			 accum_cck->rxe_frame_limit_overrun,
+			 delta_cck->rxe_frame_limit_overrun,
+			 max_cck->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sent_ack_cnt:",
 			 le32_to_cpu(cck->sent_ack_cnt),
-			 accum_cck->sent_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sent_cts_cnt:\t\t%u\t\t\t%u\n",
+			 accum_cck->sent_ack_cnt,
+			 delta_cck->sent_ack_cnt,
+			 max_cck->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sent_cts_cnt:",
 			 le32_to_cpu(cck->sent_cts_cnt),
-			 accum_cck->sent_cts_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sent_ba_rsp_cnt:\t%u\t\t\t%u\n",
+			 accum_cck->sent_cts_cnt,
+			 delta_cck->sent_cts_cnt,
+			 max_cck->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sent_ba_rsp_cnt:",
 			 le32_to_cpu(cck->sent_ba_rsp_cnt),
-			 accum_cck->sent_ba_rsp_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "dsp_self_kill:\t\t%u\t\t\t%u\n",
+			 accum_cck->sent_ba_rsp_cnt,
+			 delta_cck->sent_ba_rsp_cnt,
+			 max_cck->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "dsp_self_kill:",
 			 le32_to_cpu(cck->dsp_self_kill),
-			 accum_cck->dsp_self_kill);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 accum_cck->dsp_self_kill,
+			 delta_cck->dsp_self_kill,
+			 max_cck->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "mh_format_err:",
 			 le32_to_cpu(cck->mh_format_err),
-			 accum_cck->mh_format_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "re_acq_main_rssi_sum:\t%u\t\t\t%u\n",
+			 accum_cck->mh_format_err,
+			 delta_cck->mh_format_err, max_cck->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "re_acq_main_rssi_sum:",
 			 le32_to_cpu(cck->re_acq_main_rssi_sum),
-			 accum_cck->re_acq_main_rssi_sum);
-
-	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - GENERAL:\n");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"\t\t\tcurrent\t\t\taccumulative\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "bogus_cts:\t\t%u\t\t\t%u\n",
+			 accum_cck->re_acq_main_rssi_sum,
+			 delta_cck->re_acq_main_rssi_sum,
+			 max_cck->re_acq_main_rssi_sum);
+
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_header,
+			"Statistics_Rx - GENERAL:");
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "bogus_cts:",
 			 le32_to_cpu(general->bogus_cts),
-			 accum_general->bogus_cts);
-	pos += scnprintf(buf + pos, bufsz - pos, "bogus_ack:\t\t%u\t\t\t%u\n",
+			 accum_general->bogus_cts,
+			 delta_general->bogus_cts, max_general->bogus_cts);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "bogus_ack:",
 			 le32_to_cpu(general->bogus_ack),
-			 accum_general->bogus_ack);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "non_bssid_frames:\t%u\t\t\t%u\n",
+			 accum_general->bogus_ack,
+			 delta_general->bogus_ack, max_general->bogus_ack);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "non_bssid_frames:",
 			 le32_to_cpu(general->non_bssid_frames),
-			 accum_general->non_bssid_frames);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "filtered_frames:\t%u\t\t\t%u\n",
+			 accum_general->non_bssid_frames,
+			 delta_general->non_bssid_frames,
+			 max_general->non_bssid_frames);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "filtered_frames:",
 			 le32_to_cpu(general->filtered_frames),
-			 accum_general->filtered_frames);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "non_channel_beacons:\t%u\t\t\t%u\n",
+			 accum_general->filtered_frames,
+			 delta_general->filtered_frames,
+			 max_general->filtered_frames);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "non_channel_beacons:",
 			 le32_to_cpu(general->non_channel_beacons),
-			 accum_general->non_channel_beacons);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "channel_beacons:\t%u\t\t\t%u\n",
+			 accum_general->non_channel_beacons,
+			 delta_general->non_channel_beacons,
+			 max_general->non_channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "channel_beacons:",
 			 le32_to_cpu(general->channel_beacons),
-			 accum_general->channel_beacons);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "num_missed_bcon:\t%u\t\t\t%u\n",
+			 accum_general->channel_beacons,
+			 delta_general->channel_beacons,
+			 max_general->channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "num_missed_bcon:",
 			 le32_to_cpu(general->num_missed_bcon),
-			 accum_general->num_missed_bcon);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"adc_rx_saturation_time:\t%u\t\t\t%u\n",
+			 accum_general->num_missed_bcon,
+			 delta_general->num_missed_bcon,
+			 max_general->num_missed_bcon);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"adc_rx_saturation_time:",
 			 le32_to_cpu(general->adc_rx_saturation_time),
-			 accum_general->adc_rx_saturation_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"ina_detect_search_tm:\t%u\t\t\t%u\n",
+			 accum_general->adc_rx_saturation_time,
+			 delta_general->adc_rx_saturation_time,
+			 max_general->adc_rx_saturation_time);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"ina_detect_search_tm:",
 			 le32_to_cpu(general->ina_detection_search_time),
-			 accum_general->ina_detection_search_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_silence_rssi_a:\t%u\t\t\t%u\n",
+			 accum_general->ina_detection_search_time,
+			 delta_general->ina_detection_search_time,
+			 max_general->ina_detection_search_time);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_silence_rssi_a:",
 			 le32_to_cpu(general->beacon_silence_rssi_a),
-			 accum_general->beacon_silence_rssi_a);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_silence_rssi_b:\t%u\t\t\t%u\n",
+			 accum_general->beacon_silence_rssi_a,
+			 delta_general->beacon_silence_rssi_a,
+			 max_general->beacon_silence_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_silence_rssi_b:",
 			 le32_to_cpu(general->beacon_silence_rssi_b),
-			 accum_general->beacon_silence_rssi_b);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_silence_rssi_c:\t%u\t\t\t%u\n",
+			 accum_general->beacon_silence_rssi_b,
+			 delta_general->beacon_silence_rssi_b,
+			 max_general->beacon_silence_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_silence_rssi_c:",
 			 le32_to_cpu(general->beacon_silence_rssi_c),
-			 accum_general->beacon_silence_rssi_c);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"interference_data_flag:\t%u\t\t\t%u\n",
+			 accum_general->beacon_silence_rssi_c,
+			 delta_general->beacon_silence_rssi_c,
+			 max_general->beacon_silence_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"interference_data_flag:",
 			 le32_to_cpu(general->interference_data_flag),
-			 accum_general->interference_data_flag);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "channel_load:\t\t%u\t\t\t%u\n",
+			 accum_general->interference_data_flag,
+			 delta_general->interference_data_flag,
+			 max_general->interference_data_flag);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "channel_load:",
 			 le32_to_cpu(general->channel_load),
-			 accum_general->channel_load);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "dsp_false_alarms:\t%u\t\t\t%u\n",
+			 accum_general->channel_load,
+			 delta_general->channel_load,
+			 max_general->channel_load);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "dsp_false_alarms:",
 			 le32_to_cpu(general->dsp_false_alarms),
-			 accum_general->dsp_false_alarms);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_rssi_a:\t\t%u\t\t\t%u\n",
+			 accum_general->dsp_false_alarms,
+			 delta_general->dsp_false_alarms,
+			 max_general->dsp_false_alarms);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_rssi_a:",
 			 le32_to_cpu(general->beacon_rssi_a),
-			 accum_general->beacon_rssi_a);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_rssi_b:\t\t%u\t\t\t%u\n",
+			 accum_general->beacon_rssi_a,
+			 delta_general->beacon_rssi_a,
+			 max_general->beacon_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_rssi_b:",
 			 le32_to_cpu(general->beacon_rssi_b),
-			 accum_general->beacon_rssi_b);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_rssi_c:\t\t%u\t\t\t%u\n",
+			 accum_general->beacon_rssi_b,
+			 delta_general->beacon_rssi_b,
+			 max_general->beacon_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_rssi_c:",
 			 le32_to_cpu(general->beacon_rssi_c),
-			 accum_general->beacon_rssi_c);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_energy_a:\t%u\t\t\t%u\n",
+			 accum_general->beacon_rssi_c,
+			 delta_general->beacon_rssi_c,
+			 max_general->beacon_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_energy_a:",
 			 le32_to_cpu(general->beacon_energy_a),
-			 accum_general->beacon_energy_a);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_energy_b:\t%u\t\t\t%u\n",
+			 accum_general->beacon_energy_a,
+			 delta_general->beacon_energy_a,
+			 max_general->beacon_energy_a);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_energy_b:",
 			 le32_to_cpu(general->beacon_energy_b),
-			 accum_general->beacon_energy_b);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "beacon_energy_c:\t%u\t\t\t%u\n",
+			 accum_general->beacon_energy_b,
+			 delta_general->beacon_energy_b,
+			 max_general->beacon_energy_b);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "beacon_energy_c:",
 			 le32_to_cpu(general->beacon_energy_c),
-			 accum_general->beacon_energy_c);
+			 accum_general->beacon_energy_c,
+			 delta_general->beacon_energy_c,
+			 max_general->beacon_energy_c);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM_HT:\n");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"\t\t\tcurrent\t\t\taccumulative\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ht->plcp_err), accum_ht->plcp_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "overrun_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ht->overrun_err), accum_ht->overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "early_overrun_err:\t%u\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_header,
+			"Statistics_Rx - OFDM_HT:");
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "plcp_err:",
+			 le32_to_cpu(ht->plcp_err), accum_ht->plcp_err,
+			 delta_ht->plcp_err, max_ht->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "overrun_err:",
+			 le32_to_cpu(ht->overrun_err), accum_ht->overrun_err,
+			 delta_ht->overrun_err, max_ht->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "early_overrun_err:",
 			 le32_to_cpu(ht->early_overrun_err),
-			 accum_ht->early_overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ht->crc32_good), accum_ht->crc32_good);
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ht->crc32_err), accum_ht->crc32_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 accum_ht->early_overrun_err,
+			 delta_ht->early_overrun_err,
+			 max_ht->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "crc32_good:",
+			 le32_to_cpu(ht->crc32_good), accum_ht->crc32_good,
+			 delta_ht->crc32_good, max_ht->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "crc32_err:",
+			 le32_to_cpu(ht->crc32_err), accum_ht->crc32_err,
+			 delta_ht->crc32_err, max_ht->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "mh_format_err:",
 			 le32_to_cpu(ht->mh_format_err),
-			 accum_ht->mh_format_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg_crc32_good:\t\t%u\t\t\t%u\n",
+			 accum_ht->mh_format_err,
+			 delta_ht->mh_format_err, max_ht->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg_crc32_good:",
 			 le32_to_cpu(ht->agg_crc32_good),
-			 accum_ht->agg_crc32_good);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg_mpdu_cnt:\t\t%u\t\t\t%u\n",
+			 accum_ht->agg_crc32_good,
+			 delta_ht->agg_crc32_good, max_ht->agg_crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg_mpdu_cnt:",
 			 le32_to_cpu(ht->agg_mpdu_cnt),
-			 accum_ht->agg_mpdu_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt:\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos, "unsupport_mcs:\t\t%u\t\t\t%u\n",
+			 accum_ht->agg_mpdu_cnt,
+			 delta_ht->agg_mpdu_cnt, max_ht->agg_mpdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg_cnt:",
+			 le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt,
+			 delta_ht->agg_cnt, max_ht->agg_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "unsupport_mcs:",
 			 le32_to_cpu(ht->unsupport_mcs),
-			 accum_ht->unsupport_mcs);
+			 accum_ht->unsupport_mcs,
+			 delta_ht->unsupport_mcs, max_ht->unsupport_mcs);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
@@ -1403,9 +1544,9 @@ static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
 	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
-	int bufsz = (sizeof(struct statistics_tx) * 24) + 250;
+	int bufsz = (sizeof(struct statistics_tx) * 48) + 250;
 	ssize_t ret;
-	struct statistics_tx *tx, *accum_tx;
+	struct statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -1432,106 +1573,148 @@ static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
 	 */
 	tx = &priv->statistics.tx;
 	accum_tx = &priv->accum_statistics.tx;
+	delta_tx = &priv->delta_statistics.tx;
+	max_tx = &priv->max_delta.tx;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
-	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Tx:\n");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"\t\t\tcurrent\t\t\taccumulative\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "preamble:\t\t\t%u\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos,  ucode_stats_header,
+			"Statistics_Tx:");
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "preamble:",
 			 le32_to_cpu(tx->preamble_cnt),
-			 accum_tx->preamble_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "rx_detected_cnt:\t\t%u\t\t\t%u\n",
+			 accum_tx->preamble_cnt,
+			 delta_tx->preamble_cnt, max_tx->preamble_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "rx_detected_cnt:",
 			 le32_to_cpu(tx->rx_detected_cnt),
-			 accum_tx->rx_detected_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "bt_prio_defer_cnt:\t\t%u\t\t\t%u\n",
+			 accum_tx->rx_detected_cnt,
+			 delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "bt_prio_defer_cnt:",
 			 le32_to_cpu(tx->bt_prio_defer_cnt),
-			 accum_tx->bt_prio_defer_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "bt_prio_kill_cnt:\t\t%u\t\t\t%u\n",
+			 accum_tx->bt_prio_defer_cnt,
+			 delta_tx->bt_prio_defer_cnt,
+			 max_tx->bt_prio_defer_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "bt_prio_kill_cnt:",
 			 le32_to_cpu(tx->bt_prio_kill_cnt),
-			 accum_tx->bt_prio_kill_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "few_bytes_cnt:\t\t\t%u\t\t\t%u\n",
+			 accum_tx->bt_prio_kill_cnt,
+			 delta_tx->bt_prio_kill_cnt,
+			 max_tx->bt_prio_kill_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "few_bytes_cnt:",
 			 le32_to_cpu(tx->few_bytes_cnt),
-			 accum_tx->few_bytes_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "cts_timeout:\t\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "ack_timeout:\t\t\t%u\t\t\t%u\n",
+			 accum_tx->few_bytes_cnt,
+			 delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "cts_timeout:",
+			 le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
+			 delta_tx->cts_timeout, max_tx->cts_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "ack_timeout:",
 			 le32_to_cpu(tx->ack_timeout),
-			 accum_tx->ack_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "expected_ack_cnt:\t\t%u\t\t\t%u\n",
+			 accum_tx->ack_timeout,
+			 delta_tx->ack_timeout, max_tx->ack_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "expected_ack_cnt:",
 			 le32_to_cpu(tx->expected_ack_cnt),
-			 accum_tx->expected_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "actual_ack_cnt:\t\t\t%u\t\t\t%u\n",
+			 accum_tx->expected_ack_cnt,
+			 delta_tx->expected_ack_cnt,
+			 max_tx->expected_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "actual_ack_cnt:",
 			 le32_to_cpu(tx->actual_ack_cnt),
-			 accum_tx->actual_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "dump_msdu_cnt:\t\t\t%u\t\t\t%u\n",
+			 accum_tx->actual_ack_cnt,
+			 delta_tx->actual_ack_cnt,
+			 max_tx->actual_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "dump_msdu_cnt:",
 			 le32_to_cpu(tx->dump_msdu_cnt),
-			 accum_tx->dump_msdu_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "abort_nxt_frame_mismatch:"
-			 "\t%u\t\t\t%u\n",
+			 accum_tx->dump_msdu_cnt,
+			 delta_tx->dump_msdu_cnt,
+			 max_tx->dump_msdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "abort_nxt_frame_mismatch:",
 			 le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt),
-			 accum_tx->burst_abort_next_frame_mismatch_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "abort_missing_nxt_frame:"
-			 "\t%u\t\t\t%u\n",
+			 accum_tx->burst_abort_next_frame_mismatch_cnt,
+			 delta_tx->burst_abort_next_frame_mismatch_cnt,
+			 max_tx->burst_abort_next_frame_mismatch_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "abort_missing_nxt_frame:",
 			 le32_to_cpu(tx->burst_abort_missing_next_frame_cnt),
-			 accum_tx->burst_abort_missing_next_frame_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "cts_timeout_collision:\t\t%u\t\t\t%u\n",
+			 accum_tx->burst_abort_missing_next_frame_cnt,
+			 delta_tx->burst_abort_missing_next_frame_cnt,
+			 max_tx->burst_abort_missing_next_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "cts_timeout_collision:",
 			 le32_to_cpu(tx->cts_timeout_collision),
-			 accum_tx->cts_timeout_collision);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"ack_ba_timeout_collision:\t%u\t\t\t%u\n",
+			 accum_tx->cts_timeout_collision,
+			 delta_tx->cts_timeout_collision,
+			 max_tx->cts_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"ack_ba_timeout_collision:",
 			 le32_to_cpu(tx->ack_or_ba_timeout_collision),
-			 accum_tx->ack_or_ba_timeout_collision);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg ba_timeout:\t\t\t%u\t\t\t%u\n",
+			 accum_tx->ack_or_ba_timeout_collision,
+			 delta_tx->ack_or_ba_timeout_collision,
+			 max_tx->ack_or_ba_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg ba_timeout:",
 			 le32_to_cpu(tx->agg.ba_timeout),
-			 accum_tx->agg.ba_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg ba_resched_frames:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.ba_timeout,
+			 delta_tx->agg.ba_timeout,
+			 max_tx->agg.ba_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"agg ba_resched_frames:",
 			 le32_to_cpu(tx->agg.ba_reschedule_frames),
-			 accum_tx->agg.ba_reschedule_frames);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg scd_query_agg_frame:\t%u\t\t\t%u\n",
+			 accum_tx->agg.ba_reschedule_frames,
+			 delta_tx->agg.ba_reschedule_frames,
+			 max_tx->agg.ba_reschedule_frames);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"agg scd_query_agg_frame:",
 			 le32_to_cpu(tx->agg.scd_query_agg_frame_cnt),
-			 accum_tx->agg.scd_query_agg_frame_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg scd_query_no_agg:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.scd_query_agg_frame_cnt,
+			 delta_tx->agg.scd_query_agg_frame_cnt,
+			 max_tx->agg.scd_query_agg_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg scd_query_no_agg:",
 			 le32_to_cpu(tx->agg.scd_query_no_agg),
-			 accum_tx->agg.scd_query_no_agg);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg scd_query_agg:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.scd_query_no_agg,
+			 delta_tx->agg.scd_query_no_agg,
+			 max_tx->agg.scd_query_no_agg);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg scd_query_agg:",
 			 le32_to_cpu(tx->agg.scd_query_agg),
-			 accum_tx->agg.scd_query_agg);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg scd_query_mismatch:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.scd_query_agg,
+			 delta_tx->agg.scd_query_agg,
+			 max_tx->agg.scd_query_agg);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			"agg scd_query_mismatch:",
 			 le32_to_cpu(tx->agg.scd_query_mismatch),
-			 accum_tx->agg.scd_query_mismatch);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg frame_not_ready:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.scd_query_mismatch,
+			 delta_tx->agg.scd_query_mismatch,
+			 max_tx->agg.scd_query_mismatch);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg frame_not_ready:",
 			 le32_to_cpu(tx->agg.frame_not_ready),
-			 accum_tx->agg.frame_not_ready);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg underrun:\t\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.frame_not_ready,
+			 delta_tx->agg.frame_not_ready,
+			 max_tx->agg.frame_not_ready);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg underrun:",
 			 le32_to_cpu(tx->agg.underrun),
-			 accum_tx->agg.underrun);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg bt_prio_kill:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.underrun,
+			 delta_tx->agg.underrun, max_tx->agg.underrun);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg bt_prio_kill:",
 			 le32_to_cpu(tx->agg.bt_prio_kill),
-			 accum_tx->agg.bt_prio_kill);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "agg rx_ba_rsp_cnt:\t\t%u\t\t\t%u\n",
+			 accum_tx->agg.bt_prio_kill,
+			 delta_tx->agg.bt_prio_kill,
+			 max_tx->agg.bt_prio_kill);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "agg rx_ba_rsp_cnt:",
 			 le32_to_cpu(tx->agg.rx_ba_rsp_cnt),
-			 accum_tx->agg.rx_ba_rsp_cnt);
+			 accum_tx->agg.rx_ba_rsp_cnt,
+			 delta_tx->agg.rx_ba_rsp_cnt,
+			 max_tx->agg.rx_ba_rsp_cnt);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
@@ -1545,11 +1728,12 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
 	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
-	int bufsz = sizeof(struct statistics_general) * 4 + 250;
+	int bufsz = sizeof(struct statistics_general) * 8 + 250;
 	ssize_t ret;
 	struct statistics_general *general, *accum_general;
-	struct statistics_dbg *dbg, *accum_dbg;
-	struct statistics_div *div, *accum_div;
+	struct statistics_general *delta_general, *max_general;
+	struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
+	struct statistics_div *div, *accum_div, *delta_div, *max_div;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -1578,52 +1762,72 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
 	dbg = &priv->statistics.general.dbg;
 	div = &priv->statistics.general.div;
 	accum_general = &priv->accum_statistics.general;
+	delta_general = &priv->delta_statistics.general;
+	max_general = &priv->max_delta.general;
 	accum_dbg = &priv->accum_statistics.general.dbg;
+	delta_dbg = &priv->delta_statistics.general.dbg;
+	max_dbg = &priv->max_delta.general.dbg;
 	accum_div = &priv->accum_statistics.general.div;
+	delta_div = &priv->delta_statistics.general.div;
+	max_div = &priv->max_delta.general.div;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
-	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_General:\n");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"\t\t\tcurrent\t\t\taccumulative\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "temperature:\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_header,
+			"Statistics_General:");
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_short_format,
+			 "temperature:",
 			 le32_to_cpu(general->temperature));
-	pos += scnprintf(buf + pos, bufsz - pos, "temperature_m:\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_short_format,
+			 "temperature_m:",
 			 le32_to_cpu(general->temperature_m));
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "burst_check:\t\t\t%u\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "burst_check:",
 			 le32_to_cpu(dbg->burst_check),
-			 accum_dbg->burst_check);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "burst_count:\t\t\t%u\t\t\t%u\n",
+			 accum_dbg->burst_check,
+			 delta_dbg->burst_check, max_dbg->burst_check);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "burst_count:",
 			 le32_to_cpu(dbg->burst_count),
-			 accum_dbg->burst_count);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "sleep_time:\t\t\t%u\t\t\t%u\n",
+			 accum_dbg->burst_count,
+			 delta_dbg->burst_count, max_dbg->burst_count);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "sleep_time:",
 			 le32_to_cpu(general->sleep_time),
-			 accum_general->sleep_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "slots_out:\t\t\t%u\t\t\t%u\n",
+			 accum_general->sleep_time,
+			 delta_general->sleep_time, max_general->sleep_time);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "slots_out:",
 			 le32_to_cpu(general->slots_out),
-			 accum_general->slots_out);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "slots_idle:\t\t\t%u\t\t\t%u\n",
+			 accum_general->slots_out,
+			 delta_general->slots_out, max_general->slots_out);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "slots_idle:",
 			 le32_to_cpu(general->slots_idle),
-			 accum_general->slots_idle);
+			 accum_general->slots_idle,
+			 delta_general->slots_idle, max_general->slots_idle);
 	pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n",
 			 le32_to_cpu(general->ttl_timestamp));
-	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_a:\t\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(div->tx_on_a), accum_div->tx_on_a);
-	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_b:\t\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(div->tx_on_b), accum_div->tx_on_b);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "exec_time:\t\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(div->exec_time), accum_div->exec_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "probe_time:\t\t\t%u\t\t\t%u\n",
-			 le32_to_cpu(div->probe_time), accum_div->probe_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "rx_enable_counter:\t\t%u\t\t\t%u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "tx_on_a:",
+			 le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
+			 delta_div->tx_on_a, max_div->tx_on_a);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "tx_on_b:",
+			 le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
+			 delta_div->tx_on_b, max_div->tx_on_b);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "exec_time:",
+			 le32_to_cpu(div->exec_time), accum_div->exec_time,
+			 delta_div->exec_time, max_div->exec_time);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "probe_time:",
+			 le32_to_cpu(div->probe_time), accum_div->probe_time,
+			 delta_div->probe_time, max_div->probe_time);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "rx_enable_counter:",
 			 le32_to_cpu(general->rx_enable_counter),
-			 accum_general->rx_enable_counter);
+			 accum_general->rx_enable_counter,
+			 delta_general->rx_enable_counter,
+			 max_general->rx_enable_counter);
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
 	return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 70f0e79c8e4a..63e45cd3f634 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1162,6 +1162,8 @@ struct iwl_priv {
 	struct iwl_notif_statistics statistics;
 #ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_notif_statistics accum_statistics;
+	struct iwl_notif_statistics delta_statistics;
+	struct iwl_notif_statistics max_delta;
 #endif
 
 	/* context information */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 10db97327452..5bbe5f1f749c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -564,15 +564,24 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
 	int i;
 	__le32 *prev_stats;
 	u32 *accum_stats;
+	u32 *delta, *max_delta;
 
 	prev_stats = (__le32 *)&priv->statistics;
 	accum_stats = (u32 *)&priv->accum_statistics;
+	delta = (u32 *)&priv->delta_statistics;
+	max_delta = (u32 *)&priv->max_delta;
 
 	for (i = sizeof(__le32); i < sizeof(struct iwl_notif_statistics);
-	     i += sizeof(__le32), stats++, prev_stats++, accum_stats++)
-		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats))
-			*accum_stats += (le32_to_cpu(*stats) -
+	     i += sizeof(__le32), stats++, prev_stats++, delta++,
+	     max_delta++, accum_stats++) {
+		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
+			*delta = (le32_to_cpu(*stats) -
 				le32_to_cpu(*prev_stats));
+			*accum_stats += *delta;
+			if (*delta > *max_delta)
+				*max_delta = *delta;
+		}
+	}
 
 	/* reset accumulative statistics for "no-counter" type statistics */
 	priv->accum_statistics.general.temperature =
@@ -641,6 +650,10 @@ void iwl_reply_statistics(struct iwl_priv *priv,
 #ifdef CONFIG_IWLWIFI_DEBUG
 		memset(&priv->accum_statistics, 0,
 			sizeof(struct iwl_notif_statistics));
+		memset(&priv->delta_statistics, 0,
+			sizeof(struct iwl_notif_statistics));
+		memset(&priv->max_delta, 0,
+			sizeof(struct iwl_notif_statistics));
 #endif
 		IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
 	}
-- 
cgit v1.2.3


From 11fc524941248dc717f1af5dfa844eceb7c0217f Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:35 -0800
Subject: iwlwifi: add num_of_sos_stats to statistics counter

When uCode detects number of beacon missed consecutively above the
internal missed beacon threshold (set by uCode), it will reset and
re-tune the radio in order to get out of bad PHY state.

This "num_of_sos_states" counter monitors number of time uCode
encounters this bad condition and has to re-tune the radio.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h | 7 ++++++-
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  | 8 +++++++-
 2 files changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 3320cce3d57b..8dc34a3d4f7e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -3095,7 +3095,12 @@ struct statistics_general {
 	__le32 ttl_timestamp;
 	struct statistics_div div;
 	__le32 rx_enable_counter;
-	__le32 reserved1;
+	/*
+	 * num_of_sos_states:
+	 *  count the number of times we have to re-tune
+	 *  in order to get out of bad PHY status
+	 */
+	__le32 num_of_sos_states;
 	__le32 reserved2;
 	__le32 reserved3;
 } __attribute__ ((packed));
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 2264cbd95a00..19c7fab47939 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1728,7 +1728,7 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
 	struct iwl_priv *priv = file->private_data;
 	int pos = 0;
 	char *buf;
-	int bufsz = sizeof(struct statistics_general) * 8 + 250;
+	int bufsz = sizeof(struct statistics_general) * 10 + 300;
 	ssize_t ret;
 	struct statistics_general *general, *accum_general;
 	struct statistics_general *delta_general, *max_general;
@@ -1828,6 +1828,12 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
 			 accum_general->rx_enable_counter,
 			 delta_general->rx_enable_counter,
 			 max_general->rx_enable_counter);
+	pos += scnprintf(buf + pos, bufsz - pos, ucode_stats_format,
+			 "num_of_sos_states:",
+			 le32_to_cpu(general->num_of_sos_states),
+			 accum_general->num_of_sos_states,
+			 delta_general->num_of_sos_states,
+			 max_general->num_of_sos_states);
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
 	return ret;
-- 
cgit v1.2.3


From 937c397eb633b804d9a806d08c395ecfc42b1fec Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:36 -0800
Subject: iwlwifi: correct return code for log_event

When dumping event log in debugfs, iwl_dump_nic_event_log()
should return the correct error code instead of let the calling
function makes it own assumption.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  | 5 +++--
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++--
 3 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c78063312ea9..eaa309d8bee1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1965,7 +1965,7 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
 		IWL_ERR(priv,
 			"Invalid event log pointer 0x%08X for %s uCode\n",
 			base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
-		return pos;
+		return -EINVAL;
 	}
 
 	/* event log header */
@@ -2013,7 +2013,7 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
 			bufsz = size * 48;
 		*buf = kmalloc(bufsz, GFP_KERNEL);
 		if (!*buf)
-			return pos;
+			return -ENOMEM;
 	}
 	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
 		/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 19c7fab47939..a7ca06d21d59 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -429,8 +429,9 @@ static ssize_t iwl_dbgfs_log_event_read(struct file *file,
 	int pos = 0;
 	ssize_t ret = -ENOMEM;
 
-	pos = priv->cfg->ops->lib->dump_nic_event_log(priv, true, &buf, true);
-	if (pos && buf) {
+	ret = pos = priv->cfg->ops->lib->dump_nic_event_log(
+					priv, true, &buf, true);
+	if (buf) {
 		ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 		kfree(buf);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 10b0aa8024c4..8bbcc5487aa0 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1644,7 +1644,7 @@ int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
 	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
 		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
-		return pos;
+		return  -EINVAL;
 	}
 
 	/* event log header */
@@ -1693,7 +1693,7 @@ int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
 			bufsz = size * 48;
 		*buf = kmalloc(bufsz, GFP_KERNEL);
 		if (!*buf)
-			return pos;
+			return -ENOMEM;
 	}
 	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
 		/* if uCode has wrapped back to top of log,
-- 
cgit v1.2.3


From 2be76703a3afb281155894ac52d34f7f5d736633 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:37 -0800
Subject: iwlwifi: set interrupt coalescing timer range and default

For interrupt coalescing timer, the CSR_INT_COALESCING is an 8 bit
register in 32-usec unit, the range can go from 0x00 - 0xFF. set the
range and default timeout value for both calibration mode and operation mode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c |  4 ++--
 drivers/net/wireless/iwlwifi/iwl-dev.h  | 15 +++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-rx.c   |  4 ++--
 3 files changed, 19 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 5b56307a3812..29eb7b4dc7d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -257,8 +257,8 @@ int iwl_hw_nic_init(struct iwl_priv *priv)
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->cfg->ops->lib->apm_ops.init(priv);
 
-	/* Set interrupt coalescing timer to 512 usecs */
-	iwl_write8(priv, CSR_INT_COALESCING, 512 / 32);
+	/* Set interrupt coalescing calibration timer to default (512 usecs) */
+	iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 63e45cd3f634..251eb737860c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1011,6 +1011,21 @@ struct iwl_event_log {
 	int wraps_more_count;
 };
 
+/*
+ * host interrupt timeout value
+ * used with setting interrupt coalescing timer
+ * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
+ *
+ * default interrupt coalescing timer is 64 x 32 = 2048 usecs
+ * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
+ */
+#define IWL_HOST_INT_TIMEOUT_MAX	(0xFF)
+#define IWL_HOST_INT_TIMEOUT_DEF	(0x40)
+#define IWL_HOST_INT_TIMEOUT_MIN	(0x0)
+#define IWL_HOST_INT_CALIB_TIMEOUT_MAX	(0xFF)
+#define IWL_HOST_INT_CALIB_TIMEOUT_DEF	(0x10)
+#define IWL_HOST_INT_CALIB_TIMEOUT_MIN	(0x0)
+
 struct iwl_priv {
 
 	/* ieee device used by generic ieee processing code */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 5bbe5f1f749c..07bdba93c179 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -473,8 +473,8 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 			   (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 			   (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 
-	/* Set interrupt coalescing timer to 64 x 32 = 2048 usecs */
-	iwl_write8(priv, CSR_INT_COALESCING, 0x40);
+	/* Set interrupt coalescing timer to default (2048 usecs) */
+	iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 2a11df6ee58d1b1fc7e5ecd7593a04d7555dc522 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:38 -0800
Subject: iwlwifi: software w/a for h/w bug cause Rx bit get clear

This is a w/a for a hardware bug. the h/w bug may cause the Rx bit
(bit 15 before shifting it to 31) to clear when using interrupt coalescing.

This does not mean frames are lost - their processing is just delayed until
next interrupt arrives.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 29eb7b4dc7d4..9d6c144d0701 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1803,6 +1803,16 @@ irqreturn_t iwl_isr_ict(int irq, void *data)
 	if (val == 0xffffffff)
 		val = 0;
 
+	/*
+	 * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
+	 * (bit 15 before shifting it to 31) to clear when using interrupt
+	 * coalescing. fortunately, bits 18 and 19 stay set when this happens
+	 * so we use them to decide on the real state of the Rx bit.
+	 * In order words, bit 15 is set if bit 18 or bit 19 are set.
+	 */
+	if (val & 0xC0000)
+		val |= 0x8000;
+
 	inta = (0xff & val) | ((0xff00 & val) << 16);
 	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
 			inta, inta_mask, val);
-- 
cgit v1.2.3


From 1b3eb8236ad9369ae519216b61a3d22806370115 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:39 -0800
Subject: iwlwifi: display flowhandler register when sw error or on-demand

Flowhandler handle the communication between driver and uCode, when any
uCode error happen, we also like to know what is the status of the
flowhandler; it can help to debug flowhandler related problem.

Also adding debugfs file to dump current value of flowhandler registers.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c    |  1 +
 drivers/net/wireless/iwlwifi/iwl-5000.c    |  1 +
 drivers/net/wireless/iwlwifi/iwl-6000.c    |  1 +
 drivers/net/wireless/iwlwifi/iwl-core.c    | 65 ++++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-core.h    |  2 +
 drivers/net/wireless/iwlwifi/iwl-debug.h   |  1 +
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 24 +++++++++++
 drivers/net/wireless/iwlwifi/iwl-fh.h      | 19 +++++++++
 8 files changed, 114 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 0db1fda94a65..506429f00c12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -106,6 +106,7 @@ static struct iwl_lib_ops iwl1000_lib = {
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.dump_csr = iwl_dump_csr,
+	.dump_fh = iwl_dump_fh,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index c6120f0b8f98..500c410f5242 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1467,6 +1467,7 @@ struct iwl_lib_ops iwl5000_lib = {
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.dump_csr = iwl_dump_csr,
+	.dump_fh = iwl_dump_fh,
 	.load_ucode = iwl5000_load_ucode,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index a5a0ed4817a4..c5f244f3d747 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -216,6 +216,7 @@ static struct iwl_lib_ops iwl6000_lib = {
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
 	.dump_csr = iwl_dump_csr,
+	.dump_fh = iwl_dump_fh,
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 9d6c144d0701..28d97f5f8ccf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1353,6 +1353,8 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 	priv->cfg->ops->lib->dump_nic_error_log(priv);
 	if (priv->cfg->ops->lib->dump_csr)
 		priv->cfg->ops->lib->dump_csr(priv);
+	if (priv->cfg->ops->lib->dump_fh)
+		priv->cfg->ops->lib->dump_fh(priv, NULL, false);
 	priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false);
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)
@@ -3278,6 +3280,69 @@ void iwl_dump_csr(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_dump_csr);
 
+const static char *get_fh_string(int cmd)
+{
+	switch (cmd) {
+		IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
+		IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
+		IWL_CMD(FH_RSCSR_CHNL0_WPTR);
+		IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
+		IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
+		IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
+		IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
+		IWL_CMD(FH_TSSR_TX_STATUS_REG);
+		IWL_CMD(FH_TSSR_TX_ERROR_REG);
+	default:
+		return "UNKNOWN";
+
+	}
+}
+
+int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display)
+{
+	int i;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	int pos = 0;
+	size_t bufsz = 0;
+#endif
+	u32 fh_tbl[] = {
+		FH_RSCSR_CHNL0_STTS_WPTR_REG,
+		FH_RSCSR_CHNL0_RBDCB_BASE_REG,
+		FH_RSCSR_CHNL0_WPTR,
+		FH_MEM_RCSR_CHNL0_CONFIG_REG,
+		FH_MEM_RSSR_SHARED_CTRL_REG,
+		FH_MEM_RSSR_RX_STATUS_REG,
+		FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
+		FH_TSSR_TX_STATUS_REG,
+		FH_TSSR_TX_ERROR_REG
+	};
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (display) {
+		bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return -ENOMEM;
+		pos += scnprintf(*buf + pos, bufsz - pos,
+				"FH register values:\n");
+		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+			pos += scnprintf(*buf + pos, bufsz - pos,
+				"  %34s: 0X%08x\n",
+				get_fh_string(fh_tbl[i]),
+				iwl_read_direct32(priv, fh_tbl[i]));
+		}
+		return pos;
+	}
+#endif
+	IWL_ERR(priv, "FH register values:\n");
+	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++) {
+		IWL_ERR(priv, "  %34s: 0X%08x\n",
+			get_fh_string(fh_tbl[i]),
+			iwl_read_direct32(priv, fh_tbl[i]));
+	}
+	return 0;
+}
+EXPORT_SYMBOL(iwl_dump_fh);
+
 #ifdef CONFIG_PM
 
 int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 8deb83bfe182..666b0e0728b3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -171,6 +171,7 @@ struct iwl_lib_ops {
 				  bool full_log, char **buf, bool display);
 	void (*dump_nic_error_log)(struct iwl_priv *priv);
 	void (*dump_csr)(struct iwl_priv *priv);
+	int (*dump_fh)(struct iwl_priv *priv, char **buf, bool display);
 	int (*set_channel_switch)(struct iwl_priv *priv, u16 channel);
 	/* power management */
 	struct iwl_apm_ops apm_ops;
@@ -582,6 +583,7 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv);
 int iwl_dump_nic_event_log(struct iwl_priv *priv,
 			   bool full_log, char **buf, bool display);
 void iwl_dump_csr(struct iwl_priv *priv);
+int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display);
 #ifdef CONFIG_IWLWIFI_DEBUG
 void iwl_print_rx_config_cmd(struct iwl_priv *priv);
 #else
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 58e0462cafa3..1d1e655317a2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -111,6 +111,7 @@ struct iwl_debugfs {
 		struct dentry *file_clear_traffic_statistics;
 		struct dentry *file_csr;
 		struct dentry *file_ucode_tracing;
+		struct dentry *file_fh_reg;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index a7ca06d21d59..a3d461ff4a9c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2151,6 +2151,27 @@ static ssize_t iwl_dbgfs_ucode_tracing_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	char *buf;
+	int pos = 0;
+	ssize_t ret = -EFAULT;
+
+	if (priv->cfg->ops->lib->dump_fh) {
+		ret = pos = priv->cfg->ops->lib->dump_fh(priv, &buf, true);
+		if (buf) {
+			ret = simple_read_from_buffer(user_buf,
+						      count, ppos, buf, pos);
+			kfree(buf);
+		}
+	}
+
+	return ret;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -2167,6 +2188,7 @@ DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics);
 DEBUGFS_WRITE_FILE_OPS(clear_traffic_statistics);
 DEBUGFS_WRITE_FILE_OPS(csr);
 DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing);
+DEBUGFS_READ_FILE_OPS(fh_reg);
 
 /*
  * Create the debugfs files and directories
@@ -2218,6 +2240,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(clear_ucode_statistics, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(clear_traffic_statistics, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(csr, debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(fh_reg, debug, S_IRUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
@@ -2277,6 +2300,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_clear_traffic_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_csr);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_fh_reg);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 65fa8a69fd5a..1342cf40297a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -379,6 +379,25 @@
 
 #define FH_TSSR_TX_STATUS_REG		(FH_TSSR_LOWER_BOUND + 0x010)
 
+/**
+ * Bit fields for TSSR(Tx Shared Status & Control) error status register:
+ * 31:  Indicates an address error when accessed to internal memory
+ *	uCode/driver must write "1" in order to clear this flag
+ * 30:  Indicates that Host did not send the expected number of dwords to FH
+ *	uCode/driver must write "1" in order to clear this flag
+ * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA
+ *	command was received from the scheduler while the TRB was already full
+ *	with previous command
+ *	uCode/driver must write "1" in order to clear this flag
+ * 7-0: Each status bit indicates a channel's TxCredit error. When an error
+ *	bit is set, it indicates that the FH has received a full indication
+ *	from the RTC TxFIFO and the current value of the TxCredit counter was
+ *	not equal to zero. This mean that the credit mechanism was not
+ *	synchronized to the TxFIFO status
+ *	uCode/driver must write "1" in order to clear this flag
+ */
+#define FH_TSSR_TX_ERROR_REG		(FH_TSSR_LOWER_BOUND + 0x018)
+
 #define FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) ((1 << (_chnl)) << 24)
 #define FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) ((1 << (_chnl)) << 16)
 
-- 
cgit v1.2.3


From 4e9772b0a94c7d3a5f7062ba94afdbb9e692275d Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 15 Jan 2010 13:43:40 -0800
Subject: iwlwifi: remove extra statistics request from debugfs

When reading current ucode statistics information from debugfs, in
current implementation, it will always send a new "statistics request" to
uCode. In normal operation, uCode should report the statistics per beacon
interval. Remove this extra request to reduce the additional command exchanges
between driver and uCode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 41 ------------------------------
 1 file changed, 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index a3d461ff4a9c..38e2f9f9f1dc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1109,16 +1109,6 @@ static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
-	/* make request to uCode to retrieve statistics information */
-	mutex_lock(&priv->mutex);
-	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
-	mutex_unlock(&priv->mutex);
-
-	if (ret) {
-		IWL_ERR(priv,
-			"Error sending statistics request: %zd\n", ret);
-		return -EAGAIN;
-	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate Buffer\n");
@@ -1552,16 +1542,6 @@ static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
-	/* make request to uCode to retrieve statistics information */
-	mutex_lock(&priv->mutex);
-	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
-	mutex_unlock(&priv->mutex);
-
-	if (ret) {
-		IWL_ERR(priv,
-			"Error sending statistics request: %zd\n", ret);
-		return -EAGAIN;
-	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate Buffer\n");
@@ -1739,16 +1719,6 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
-	/* make request to uCode to retrieve statistics information */
-	mutex_lock(&priv->mutex);
-	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
-	mutex_unlock(&priv->mutex);
-
-	if (ret) {
-		IWL_ERR(priv,
-			"Error sending statistics request: %zd\n", ret);
-		return -EAGAIN;
-	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate Buffer\n");
@@ -1986,23 +1956,12 @@ static ssize_t iwl_dbgfs_tx_power_read(struct file *file,
 	struct iwl_priv *priv = file->private_data;
 	char buf[128];
 	int pos = 0;
-	ssize_t ret;
 	const size_t bufsz = sizeof(buf);
 	struct statistics_tx *tx;
 
 	if (!iwl_is_alive(priv))
 		pos += scnprintf(buf + pos, bufsz - pos, "N/A\n");
 	else {
-		/* make request to uCode to retrieve statistics information */
-		mutex_lock(&priv->mutex);
-		ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
-		mutex_unlock(&priv->mutex);
-
-		if (ret) {
-			IWL_ERR(priv, "Error sending statistics request: %zd\n",
-				ret);
-			return -EAGAIN;
-		}
 		tx = &priv->statistics.tx;
 		if (tx->tx_power.ant_a ||
 		    tx->tx_power.ant_b ||
-- 
cgit v1.2.3


From 1f44780827c6bbbcd1f12d5c6b6ce84f49a96bc0 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 15 Jan 2010 13:43:41 -0800
Subject: iwlwifi: update copyright year to 2010

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945-fh.h  | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-3945-hw.h  | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-3945-led.c | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945-led.h | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945-rs.c  | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-3945.h     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-4965-hw.h  | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-4965.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-5000-hw.h  | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-5000.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-6000-hw.h  | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-6000.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-agn-led.c  | 2 +-
 drivers/net/wireless/iwlwifi/iwl-agn-led.h  | 2 +-
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c   | 2 +-
 drivers/net/wireless/iwlwifi/iwl-agn-rs.h   | 2 +-
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 2 +-
 drivers/net/wireless/iwlwifi/iwl-calib.c    | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-calib.h    | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-commands.h | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-core.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-core.h     | 6 +++---
 drivers/net/wireless/iwlwifi/iwl-csr.h      | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-debug.h    | 2 +-
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  | 2 +-
 drivers/net/wireless/iwlwifi/iwl-dev.h      | 2 +-
 drivers/net/wireless/iwlwifi/iwl-eeprom.c   | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-eeprom.h   | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-fh.h       | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-hcmd.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-helpers.h  | 2 +-
 drivers/net/wireless/iwlwifi/iwl-io.h       | 2 +-
 drivers/net/wireless/iwlwifi/iwl-led.c      | 2 +-
 drivers/net/wireless/iwlwifi/iwl-led.h      | 2 +-
 drivers/net/wireless/iwlwifi/iwl-power.c    | 2 +-
 drivers/net/wireless/iwlwifi/iwl-power.h    | 2 +-
 drivers/net/wireless/iwlwifi/iwl-prph.h     | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-rx.c       | 2 +-
 drivers/net/wireless/iwlwifi/iwl-scan.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-spectrum.c | 2 +-
 drivers/net/wireless/iwlwifi/iwl-spectrum.h | 2 +-
 drivers/net/wireless/iwlwifi/iwl-sta.c      | 2 +-
 drivers/net/wireless/iwlwifi/iwl-sta.h      | 2 +-
 drivers/net/wireless/iwlwifi/iwl-tx.c       | 2 +-
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++--
 47 files changed, 63 insertions(+), 63 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 506429f00c12..d5c6edbbc95a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h b/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
index 08ce259a0e60..042f6bc0df13 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
index 6fd10d443ba3..3a876a8ece38 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index a871d09d598f..abe2b739c4dc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
index 5a1033ca7aaa..ce990adc51e7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index d4b49883b30e..47909f94271e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 28ffe4c826d8..6472910b72d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 3ec2fe370b58..db4137d9a3ab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
index c606366b582c..67ef562e8db1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 6a004abb5973..8159a0fcf5a8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
index bc056e9ab85f..714e032f6217 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 500c410f5242..aab6cf23c2bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000-hw.h b/drivers/net/wireless/iwlwifi/iwl-6000-hw.h
index 90185777d98b..ddba39999997 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-6000-hw.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index c5f244f3d747..4dab7f12e725 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.c b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
index 3bccba20f6da..1a24946bc203 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.h b/drivers/net/wireless/iwlwifi/iwl-agn-led.h
index ab55f92a161d..a594e4fdc6b8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-led.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index b93e49158196..6aebcedaca8d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index affc0c5a2f2c..2f0094a43261 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index eaa309d8bee1..8db86239bd6a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index dc61906290e8..845831ac053e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.h b/drivers/net/wireless/iwlwifi/iwl-calib.h
index b6cef989a796..2b7b1df83ba0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.h
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 8dc34a3d4f7e..cee5fb2187c8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 28d97f5f8ccf..bb3ed25f8438 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2,7 +2,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 666b0e0728b3..785331a98aa5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -71,7 +71,7 @@ struct iwl_cmd;
 
 
 #define IWLWIFI_VERSION "in-tree:"
-#define DRV_COPYRIGHT	"Copyright(c) 2003-2009 Intel Corporation"
+#define DRV_COPYRIGHT	"Copyright(c) 2003-2010 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 
 #define IWL_PCI_DEVICE(dev, subdev, cfg) \
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 1ec8cb4d5eae..1e00720bf8b1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 1d1e655317a2..0facaca9b40b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project.
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 38e2f9f9f1dc..af00ad2afa14 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2,7 +2,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 251eb737860c..c6310b0b2f12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 4a30969689ff..fd37152abae3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 0cd9c02ee044..4e1ba824dc50 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 1342cf40297a..113c3669b9ce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 87d684efe110..86783c27d97c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -2,7 +2,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index bd0b12efb5c7..45af5bbc1c56 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index e552d4c4bdbe..c719baf2585a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project.
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 46c7a95b88f0..a6f9c918aabc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index f47f053f02ea..49a70baa3fb6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 8ccc0bb1d9ed..8599444bef01 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 310c32e8f698..5db91c10dcc8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 6d95832db06d..d2d2a9174900 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 07bdba93c179..eb45f8be0746 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index fa1c89ba6459..ceb91f969e45 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -2,7 +2,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.c b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
index 1ea5cd345fe8..da166d1d1b13 100644
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.c
+++ b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.h b/drivers/net/wireless/iwlwifi/iwl-spectrum.h
index a77c1e619062..af6babee2891 100644
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.h
+++ b/drivers/net/wireless/iwlwifi/iwl-spectrum.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ieee80211 subsystem header files.
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index cde09a890b73..8afa39b4b488 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 8d052de2d405..8c6850d03e47 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 87ce2bd292c7..d365d13e3291 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 8bbcc5487aa0..c46f988d0a5b 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
@@ -77,7 +77,7 @@
 #endif
 
 #define DRV_VERSION  IWLWIFI_VERSION VD VS
-#define DRV_COPYRIGHT	"Copyright(c) 2003-2009 Intel Corporation"
+#define DRV_COPYRIGHT	"Copyright(c) 2003-2010 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
-- 
cgit v1.2.3


From 026816fce48390807859508cd5172e9c79901ef7 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:03:28 +0100
Subject: b43: N-PHY: implement RX PHY cleanup and setup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 82 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 4a817e3da163..a1dd381c6c6e 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -480,6 +480,88 @@ static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCalPhyCleanup */
+static void b43_nphy_rx_cal_phy_cleanup(struct b43_wldev *dev, u8 core)
+{
+	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+
+	b43_phy_write(dev, B43_NPHY_RFSEQCA, regs[0]);
+	if (core == 0) {
+		b43_phy_write(dev, B43_NPHY_AFECTL_C1, regs[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, regs[2]);
+	} else {
+		b43_phy_write(dev, B43_NPHY_AFECTL_C2, regs[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[2]);
+	}
+	b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[3]);
+	b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[4]);
+	b43_phy_write(dev, B43_NPHY_RFCTL_RSSIO1, regs[5]);
+	b43_phy_write(dev, B43_NPHY_RFCTL_RSSIO2, regs[6]);
+	b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, regs[7]);
+	b43_phy_write(dev, B43_NPHY_RFCTL_OVER, regs[8]);
+	b43_phy_write(dev, B43_NPHY_PAPD_EN0, regs[9]);
+	b43_phy_write(dev, B43_NPHY_PAPD_EN1, regs[10]);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCalPhySetup */
+static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
+{
+	u8 rxval, txval;
+	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+
+	regs[0] = b43_phy_read(dev, B43_NPHY_RFSEQCA);
+	if (core == 0) {
+		regs[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
+		regs[2] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER1);
+	} else {
+		regs[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
+		regs[2] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+	}
+	regs[3] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+	regs[4] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+	regs[5] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO1);
+	regs[6] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO2);
+	regs[7] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B1S1);
+	regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_OVER);
+	regs[9] = b43_phy_read(dev, B43_NPHY_PAPD_EN0);
+	regs[10] = b43_phy_read(dev, B43_NPHY_PAPD_EN1);
+
+	b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x0001);
+	b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x0001);
+
+	b43_phy_maskset(dev, B43_NPHY_RFSEQCA, (u16)~B43_NPHY_RFSEQCA_RXDIS,
+			((1 - core) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
+	b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_TXEN,
+			((1 - core) << B43_NPHY_RFSEQCA_TXEN_SHIFT));
+	b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXEN,
+			(core << B43_NPHY_RFSEQCA_RXEN_SHIFT));
+	b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_TXDIS,
+			(core << B43_NPHY_RFSEQCA_TXDIS_SHIFT));
+
+	if (core == 0) {
+		b43_phy_mask(dev, B43_NPHY_AFECTL_C1, ~0x0007);
+		b43_phy_set(dev, B43_NPHY_AFECTL_OVER1, 0x0007);
+	} else {
+		b43_phy_mask(dev, B43_NPHY_AFECTL_C2, ~0x0007);
+		b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0007);
+	}
+
+	/* TODO: Call N PHY RF Ctrl Intc Override with 2, 0, 3 as arguments */
+	/* TODO: Call N PHY RF Intc Override with 8, 0, 3, 0 as arguments */
+	/* TODO: Call N PHY RF Seq with 0 as argument */
+
+	if (core == 0) {
+		rxval = 1;
+		txval = 8;
+	} else {
+		rxval = 4;
+		txval = 2;
+	}
+
+	/* TODO: Call N PHY RF Ctrl Intc Override with 1, rxval, (core + 1) */
+	/* TODO: Call N PHY RF Ctrl Intc Override with 1, txval, (2 - core) */
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalcRxIqComp */
 static void b43_nphy_calc_rx_iq_comp(struct b43_wldev *dev, u8 mask)
 {
-- 
cgit v1.2.3


From e53de67449bbcaf5551f54e506a4dff62fc6a49c Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:03:32 +0100
Subject: b43: N-PHY: implement TX PHY cleanup and setup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 112 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 110 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index a1dd381c6c6e..fd93b2a6b494 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1505,6 +1505,114 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 	return target;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxCalPhyCleanup */
+static void b43_nphy_tx_cal_phy_cleanup(struct b43_wldev *dev)
+{
+	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+
+	if (dev->phy.rev >= 3) {
+		b43_phy_write(dev, B43_NPHY_AFECTL_C1, regs[0]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_C2, regs[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, regs[2]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[3]);
+		b43_phy_write(dev, B43_NPHY_BBCFG, regs[4]);
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 3,
+			width 16, and data from regs[5] */
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 19,
+			width 16, and data from regs[6] */
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[7]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[8]);
+		b43_phy_write(dev, B43_NPHY_PAPD_EN0, regs[9]);
+		b43_phy_write(dev, B43_NPHY_PAPD_EN1, regs[10]);
+		b43_nphy_reset_cca(dev);
+	} else {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, regs[0]);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, regs[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[2]);
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 2,
+			width 16, and data from regs[3] */
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 18,
+			width 16, and data from regs[4] */
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[5]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[6]);
+	}
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxCalPhySetup */
+static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
+{
+	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+	u16 tmp;
+
+	regs[0] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
+	regs[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
+	if (dev->phy.rev >= 3) {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0xF0FF, 0x0A00);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0xF0FF, 0x0A00);
+
+		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER1);
+		regs[2] = tmp;
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, tmp | 0x0600);
+
+		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		regs[3] = tmp;
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp | 0x0600);
+
+		regs[4] = b43_phy_read(dev, B43_NPHY_BBCFG);
+		b43_phy_mask(dev, B43_NPHY_BBCFG, ~B43_NPHY_BBCFG_RSTRX);
+
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 3,
+			width 16, and data pointing to tmp */
+		regs[5] = tmp;
+
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 3,
+			width 16, and data 0 */
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 19,
+			width 16, and data pointing to tmp */
+		regs[6] = tmp;
+
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 19,
+			width 16, and data 0 */
+		regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+		regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+
+		/* TODO: Call N PHY RF Ctrl Intc Override with 2, 1, 3 */
+		/* TODO: Call N PHY RF Ctrl Intc Override with 1, 2, 1 */
+		/* TODO: Call N PHY RF Ctrl Intc Override with 1, 8, 2 */
+
+		regs[9] = b43_phy_read(dev, B43_NPHY_PAPD_EN0);
+		regs[10] = b43_phy_read(dev, B43_NPHY_PAPD_EN1);
+		b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x0001);
+		b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x0001);
+	} else {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, 0xA000);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, 0xA000);
+		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		regs[2] = tmp;
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp | 0x3000);
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 2,
+			width 16, and data pointing to tmp */
+		regs[3] = tmp;
+		tmp |= 0x2000;
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 2,
+			width 16, and data pointer tmp */
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 18,
+			width 16, and data pointer tmp */
+		regs[4] = tmp;
+		tmp |= 0x2000;
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 18,
+			width 16, and data pointer tmp */
+		regs[5] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+		regs[6] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+			tmp = 0x0180;
+		else
+			tmp = 0x0120;
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, tmp);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, tmp);
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal */
 static void b43_nphy_restore_cal(struct b43_wldev *dev)
 {
@@ -1617,7 +1725,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		width 16, and data pointer gain */
 
 	b43_nphy_tx_cal_radio_setup(dev);
-	/* TODO: Call N PHY TX Cal PHY Setup */
+	b43_nphy_tx_cal_phy_setup(dev);
 
 	phy6or5x = dev->phy.rev >= 6 ||
 		(dev->phy.rev == 5 && nphy->ipa2g_on &&
@@ -1788,7 +1896,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0);
 	}
 
-	/* TODO: Call N PHY TX Cal PHY Cleanup */
+	b43_nphy_tx_cal_phy_cleanup(dev);
 	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
 		width 16, and data from save */
 
-- 
cgit v1.2.3


From ad9716e8e8bc39664a0d41ec94f9bffbf748b45b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:03:40 +0100
Subject: b43: N-PHY: implement MIMO config update
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 16 +++++++++++++++-
 drivers/net/wireless/b43/phy_n.h |  1 +
 2 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index fd93b2a6b494..1996843eac11 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -424,6 +424,20 @@ static void b43_nphy_reset_cca(struct b43_wldev *dev)
 	/* TODO: N PHY Force RF Seq with argument 2 */
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
+static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
+{
+	u16 mimocfg = b43_phy_read(dev, B43_NPHY_MIMOCFG);
+
+	mimocfg |= B43_NPHY_MIMOCFG_AUTO;
+	if (preamble == 1)
+		mimocfg |= B43_NPHY_MIMOCFG_GFMIX;
+	else
+		mimocfg &= ~B43_NPHY_MIMOCFG_GFMIX;
+
+	b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqEst */
 static void b43_nphy_rx_iq_est(struct b43_wldev *dev, struct nphy_iq_est *est,
 				u16 samps, u8 time, bool wait)
@@ -2180,7 +2194,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x50);
 	b43_phy_write(dev, B43_NPHY_TXRIFS_FRDEL, 0x30);
 
-	/* TODO MIMO-Config */
+	b43_nphy_update_mimo_config(dev, nphy->preamble_override);
 	/* TODO Update TX/RX chain */
 
 	if (phy->rev < 2) {
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 4572866756fc..ae00e3f2d613 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -973,6 +973,7 @@ struct b43_phy_n {
 	bool hang_avoid;
 	bool mute;
 	u16 papd_epsilon_offset[2];
+	s32 preamble_override;
 
 	u8 mphase_cal_phase_id;
 	u16 mphase_txcal_cmdidx;
-- 
cgit v1.2.3


From 53ae8e8c92b2715f27c95e8e7169bca9a8909856 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:03:48 +0100
Subject: b43: N-PHY: implement stopping playback
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 34 +++++++++++++++++++++++++++++++---
 drivers/net/wireless/b43/phy_n.h |  1 +
 2 files changed, 32 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 1996843eac11..229f2d0364f2 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -749,6 +749,34 @@ static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/stop-playback */
+static void b43_nphy_stop_playback(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u16 tmp;
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	tmp = b43_phy_read(dev, B43_NPHY_SAMP_STAT);
+	if (tmp & 0x1)
+		b43_phy_set(dev, B43_NPHY_SAMP_CMD, B43_NPHY_SAMP_CMD_STOP);
+	else if (tmp & 0x2)
+		b43_phy_mask(dev, B43_NPHY_IQLOCAL_CMDGCTL, (u16)~0x8000);
+
+	b43_phy_mask(dev, B43_NPHY_SAMP_CMD, ~0x0004);
+
+	if (nphy->bb_mult_save & 0x80000000) {
+		tmp = nphy->bb_mult_save & 0xFFFF;
+		/* TODO: Write an N PHY Table with ID 15, length 1, offset 87,
+			width 16 and data from tmp */
+		nphy->bb_mult_save = 0;
+	}
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
 static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 {
@@ -1906,7 +1934,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 				nphy->mphase_txcal_bestcoeffs */
 		}
 
-		/* TODO: Call N PHY Stop Playback */
+		b43_nphy_stop_playback(dev);
 		b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0);
 	}
 
@@ -2053,7 +2081,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 			/* TODO:Call N PHY RF Ctrl Override with 0x400, tmp[0],
 				3, 0 as arguments */
 			/* TODO: Call N PHY Force RF Seq with 2 as argument */
-			/* TODO: Call N PHT Stop Playback */
+			b43_nphy_stop_playback(dev);
 
 			if (playtone) {
 				/* TODO: Call N PHY TX Tone with 4000,
@@ -2080,7 +2108,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 				} else {
 					b43_nphy_calc_rx_iq_comp(dev, 1 << i);
 				}
-				/* TODO: Call N PHY Stop Playback */
+				b43_nphy_stop_playback(dev);
 			}
 
 			if (ret != 0)
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index ae00e3f2d613..d6c92a81d3c0 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -974,6 +974,7 @@ struct b43_phy_n {
 	bool mute;
 	u16 papd_epsilon_offset[2];
 	s32 preamble_override;
+	u32 bb_mult_save;
 
 	u8 mphase_cal_phase_id;
 	u16 mphase_txcal_cmdidx;
-- 
cgit v1.2.3


From 4f4ab6cd1486fcb0ab8d689d625ac7691198f36b Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:03:55 +0100
Subject: b43: N-PHY: implement chain selection
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 30 +++++++++++++++++++++++++++++-
 drivers/net/wireless/b43/phy_n.h |  1 +
 2 files changed, 30 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 229f2d0364f2..90a49cfaa965 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -438,6 +438,34 @@ static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
 	b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Chains */
+static void b43_nphy_update_txrx_chain(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	bool override = false;
+	u16 chain = 0x33;
+
+	if (nphy->txrx_chain == 0) {
+		chain = 0x11;
+		override = true;
+	} else if (nphy->txrx_chain == 1) {
+		chain = 0x22;
+		override = true;
+	}
+
+	b43_phy_maskset(dev, B43_NPHY_RFSEQCA,
+			~(B43_NPHY_RFSEQCA_TXEN | B43_NPHY_RFSEQCA_RXEN),
+			chain);
+
+	if (override)
+		b43_phy_set(dev, B43_NPHY_RFSEQMODE,
+				B43_NPHY_RFSEQMODE_CAOVER);
+	else
+		b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
+				~B43_NPHY_RFSEQMODE_CAOVER);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxIqEst */
 static void b43_nphy_rx_iq_est(struct b43_wldev *dev, struct nphy_iq_est *est,
 				u16 samps, u8 time, bool wait)
@@ -2223,7 +2251,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 	b43_phy_write(dev, B43_NPHY_TXRIFS_FRDEL, 0x30);
 
 	b43_nphy_update_mimo_config(dev, nphy->preamble_override);
-	/* TODO Update TX/RX chain */
+	b43_nphy_update_txrx_chain(dev);
 
 	if (phy->rev < 2) {
 		b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8);
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index d6c92a81d3c0..f5a27661f659 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -987,6 +987,7 @@ struct b43_phy_n {
 	bool txiqlocal_coeffsvalid;
 	struct b43_phy_n_txpwrindex txpwrindex[2];
 
+	u8 txrx_chain;
 	u16 tx_rx_cal_phy_saveregs[11];
 	u16 tx_rx_cal_radio_saveregs[22];
 
-- 
cgit v1.2.3


From 67c0d6e2d1abb9cbff9235143a8faaef89119628 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:04:02 +0100
Subject: b43: N-PHY: move RF sequence declarations top, add missing calls
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 90a49cfaa965..99024b02bdbd 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -55,6 +55,18 @@ struct nphy_iq_est {
 	u32 q1_pwr;
 };
 
+enum b43_nphy_rf_sequence {
+	B43_RFSEQ_RX2TX,
+	B43_RFSEQ_TX2RX,
+	B43_RFSEQ_RESET2RX,
+	B43_RFSEQ_UPDATE_GAINH,
+	B43_RFSEQ_UPDATE_GAINL,
+	B43_RFSEQ_UPDATE_GAINU,
+};
+
+static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
+				       enum b43_nphy_rf_sequence seq);
+
 void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
 {//TODO
 }
@@ -421,7 +433,7 @@ static void b43_nphy_reset_cca(struct b43_wldev *dev)
 	udelay(1);
 	b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
 	b43_nphy_bmac_clock_fgc(dev, 0);
-	/* TODO: N PHY Force RF Seq with argument 2 */
+	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
@@ -590,7 +602,7 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
 
 	/* TODO: Call N PHY RF Ctrl Intc Override with 2, 0, 3 as arguments */
 	/* TODO: Call N PHY RF Intc Override with 8, 0, 3, 0 as arguments */
-	/* TODO: Call N PHY RF Seq with 0 as argument */
+	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
 
 	if (core == 0) {
 		rxval = 1;
@@ -872,15 +884,7 @@ static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, false);
 }
 
-enum b43_nphy_rf_sequence {
-	B43_RFSEQ_RX2TX,
-	B43_RFSEQ_TX2RX,
-	B43_RFSEQ_RESET2RX,
-	B43_RFSEQ_UPDATE_GAINH,
-	B43_RFSEQ_UPDATE_GAINL,
-	B43_RFSEQ_UPDATE_GAINU,
-};
-
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ForceRFSeq */
 static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
 				       enum b43_nphy_rf_sequence seq)
 {
@@ -2156,7 +2160,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 	}
 
 	/* TODO: Call N PHY RF Ctrl Override with 0x400, 0, 3, 1 as arguments*/
-	/* TODO: Call N PHY Force RF Seq with 2 as argument */
+	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
 	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
 		width 16, and data from gain_save */
 
-- 
cgit v1.2.3


From c57199bc32ebcd914253496486d2e09b1c9a3de0 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sun, 17 Jan 2010 13:04:08 +0100
Subject: b43: N-PHY: store seq mode for proper restoring (follow specs)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 99024b02bdbd..95190d42372c 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -897,6 +897,7 @@ static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
 		[B43_RFSEQ_UPDATE_GAINU]	= B43_NPHY_RFSEQTR_UPGU,
 	};
 	int i;
+	u16 seq_mode = b43_phy_read(dev, B43_NPHY_RFSEQMODE);
 
 	B43_WARN_ON(seq >= ARRAY_SIZE(trigger));
 
@@ -910,8 +911,7 @@ static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
 	}
 	b43err(dev->wl, "RF sequence status timeout\n");
 ok:
-	b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
-		     ~(B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER));
+	b43_phy_write(dev, B43_NPHY_RFSEQMODE, seq_mode);
 }
 
 static void b43_nphy_bphy_init(struct b43_wldev *dev)
-- 
cgit v1.2.3


From 27032059677b98f33634ceb90488812db432cbc9 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 17 Jan 2010 21:08:50 +0100
Subject: ath9k: fix RTS/CTS handling

The Tx DMA descriptor has two kinds of flags that select RTS/CTS usage.
The first one (global for the frame) selects whether RTS/CTS or
CTS-to-self should be used, the second one enables RTS/CTS or
CTS-to-self usage for an individual multi-rate-retry entry.
Previously the code preparing the descriptor only enabled the global
flag, if the first MRR series selected the local one.
Fix this by enabling the global flag if any of the MRR entries need it.
With this patch, rate control can properly select the use of RTS/CTS
for all MRR entries except the first one, which is the default behavior.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 37 +++++++++++++++--------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index a821bb687b3b..a6893cf0c43b 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1498,26 +1498,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
 		ctsrate |= rate->hw_value_short;
 
-	/*
-	 * ATH9K_TXDESC_RTSENA and ATH9K_TXDESC_CTSENA are mutually exclusive.
-	 * Check the first rate in the series to decide whether RTS/CTS
-	 * or CTS-to-self has to be used.
-	 */
-	if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
-		flags = ATH9K_TXDESC_CTSENA;
-	else if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
-		flags = ATH9K_TXDESC_RTSENA;
-
-	/* FIXME: Handle aggregation protection */
-	if (sc->config.ath_aggr_prot &&
-	    (!bf_isaggr(bf) || (bf_isaggr(bf) && bf->bf_al < 8192))) {
-		flags = ATH9K_TXDESC_RTSENA;
-	}
-
-	/* For AR5416 - RTS cannot be followed by a frame larger than 8K */
-	if (bf_isaggr(bf) && (bf->bf_al > sc->sc_ah->caps.rts_aggr_limit))
-		flags &= ~(ATH9K_TXDESC_RTSENA);
-
 	for (i = 0; i < 4; i++) {
 		bool is_40, is_sgi, is_sp;
 		int phy;
@@ -1529,8 +1509,15 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 		series[i].Tries = rates[i].count;
 		series[i].ChSel = common->tx_chainmask;
 
-		if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+		if ((sc->config.ath_aggr_prot && bf_isaggr(bf)) ||
+		    (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
 			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+			flags |= ATH9K_TXDESC_RTSENA;
+		} else if (rates[i].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
+			flags |= ATH9K_TXDESC_CTSENA;
+		}
+
 		if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
 			series[i].RateFlags |= ATH9K_RATESERIES_2040;
 		if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
@@ -1568,6 +1555,14 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 			phy, rate->bitrate * 100, bf->bf_frmlen, rix, is_sp);
 	}
 
+	/* For AR5416 - RTS cannot be followed by a frame larger than 8K */
+	if (bf_isaggr(bf) && (bf->bf_al > sc->sc_ah->caps.rts_aggr_limit))
+		flags &= ~ATH9K_TXDESC_RTSENA;
+
+	/* ATH9K_TXDESC_RTSENA and ATH9K_TXDESC_CTSENA are mutually exclusive. */
+	if (flags & ATH9K_TXDESC_RTSENA)
+		flags &= ~ATH9K_TXDESC_CTSENA;
+
 	/* set dur_update_en for l-sig computation except for PS-Poll frames */
 	ath9k_hw_set11n_ratescenario(sc->sc_ah, bf->bf_desc,
 				     bf->bf_lastbf->bf_desc,
-- 
cgit v1.2.3


From 288c8ce8047695fd8872dd5db3ef21a9679c402f Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 17 Jan 2010 23:17:29 +0100
Subject: p54pci: handle dma mapping errors

This patch adds error-paths to handle pci_dma_mapping errors.

Cc: <stable@kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54pci.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index a72f7c2577de..4bf4c213baec 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -157,6 +157,14 @@ static void p54p_refill_rx_ring(struct ieee80211_hw *dev,
 						 skb_tail_pointer(skb),
 						 priv->common.rx_mtu + 32,
 						 PCI_DMA_FROMDEVICE);
+
+			if (pci_dma_mapping_error(priv->pdev, mapping)) {
+				dev_kfree_skb_any(skb);
+				dev_err(&priv->pdev->dev,
+					"RX DMA Mapping error\n");
+				break;
+			}
+
 			desc->host_addr = cpu_to_le32(mapping);
 			desc->device_addr = 0;	// FIXME: necessary?
 			desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
@@ -325,14 +333,20 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	u32 device_idx, idx, i;
 
 	spin_lock_irqsave(&priv->lock, flags);
-
 	device_idx = le32_to_cpu(ring_control->device_idx[1]);
 	idx = le32_to_cpu(ring_control->host_idx[1]);
 	i = idx % ARRAY_SIZE(ring_control->tx_data);
 
-	priv->tx_buf_data[i] = skb;
 	mapping = pci_map_single(priv->pdev, skb->data, skb->len,
 				 PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(priv->pdev, mapping)) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		p54_free_skb(dev, skb);
+		dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
+		return ;
+	}
+	priv->tx_buf_data[i] = skb;
+
 	desc = &ring_control->tx_data[i];
 	desc->host_addr = cpu_to_le32(mapping);
 	desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;
-- 
cgit v1.2.3


From d713804c6032b95cd3035014e16fadebb9655c6f Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 17 Jan 2010 23:19:25 +0100
Subject: p54pci: move tx cleanup into tasklet

This patch moves the tx cleanup routines out of the critical
interrupt context and into the (previously known as rx) tasklet.

The main goal of this operation is to remove the extensive
usage of spin_lock_irqsaves in the generic p54common library.

The next step would be to modify p54usb to do the
rx processing inside a tasklet (just like usbnet).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54pci.c | 56 ++++++++++++++++++++-------------------
 drivers/net/wireless/p54/p54pci.h |  6 ++---
 2 files changed, 32 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 4bf4c213baec..48cae48ed6eb 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -234,25 +234,26 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
 	p54p_refill_rx_ring(dev, ring_index, ring, ring_limit, rx_buf);
 }
 
-/* caller must hold priv->lock */
 static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 	int ring_index, struct p54p_desc *ring, u32 ring_limit,
-	void **tx_buf)
+	struct sk_buff **tx_buf)
 {
+	unsigned long flags;
 	struct p54p_priv *priv = dev->priv;
 	struct p54p_ring_control *ring_control = priv->ring_control;
 	struct p54p_desc *desc;
+	struct sk_buff *skb;
 	u32 idx, i;
 
 	i = (*index) % ring_limit;
 	(*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
 	idx %= ring_limit;
 
+	spin_lock_irqsave(&priv->lock, flags);
 	while (i != idx) {
 		desc = &ring[i];
-		if (tx_buf[i])
-			if (FREE_AFTER_TX((struct sk_buff *) tx_buf[i]))
-				p54_free_skb(dev, tx_buf[i]);
+
+		skb = tx_buf[i];
 		tx_buf[i] = NULL;
 
 		pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
@@ -263,17 +264,32 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 		desc->len = 0;
 		desc->flags = 0;
 
+		if (skb && FREE_AFTER_TX(skb)) {
+			spin_unlock_irqrestore(&priv->lock, flags);
+			p54_free_skb(dev, skb);
+			spin_lock_irqsave(&priv->lock, flags);
+		}
+
 		i++;
 		i %= ring_limit;
 	}
+	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static void p54p_rx_tasklet(unsigned long dev_id)
+static void p54p_tasklet(unsigned long dev_id)
 {
 	struct ieee80211_hw *dev = (struct ieee80211_hw *)dev_id;
 	struct p54p_priv *priv = dev->priv;
 	struct p54p_ring_control *ring_control = priv->ring_control;
 
+	p54p_check_tx_ring(dev, &priv->tx_idx_mgmt, 3, ring_control->tx_mgmt,
+			   ARRAY_SIZE(ring_control->tx_mgmt),
+			   priv->tx_buf_mgmt);
+
+	p54p_check_tx_ring(dev, &priv->tx_idx_data, 1, ring_control->tx_data,
+			   ARRAY_SIZE(ring_control->tx_data),
+			   priv->tx_buf_data);
+
 	p54p_check_rx_ring(dev, &priv->rx_idx_mgmt, 2, ring_control->rx_mgmt,
 		ARRAY_SIZE(ring_control->rx_mgmt), priv->rx_buf_mgmt);
 
@@ -288,38 +304,24 @@ static irqreturn_t p54p_interrupt(int irq, void *dev_id)
 {
 	struct ieee80211_hw *dev = dev_id;
 	struct p54p_priv *priv = dev->priv;
-	struct p54p_ring_control *ring_control = priv->ring_control;
 	__le32 reg;
 
 	spin_lock(&priv->lock);
 	reg = P54P_READ(int_ident);
 	if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) {
-		spin_unlock(&priv->lock);
-		return IRQ_HANDLED;
+		goto out;
 	}
-
 	P54P_WRITE(int_ack, reg);
 
 	reg &= P54P_READ(int_enable);
 
-	if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) {
-		p54p_check_tx_ring(dev, &priv->tx_idx_mgmt,
-				   3, ring_control->tx_mgmt,
-				   ARRAY_SIZE(ring_control->tx_mgmt),
-				   priv->tx_buf_mgmt);
-
-		p54p_check_tx_ring(dev, &priv->tx_idx_data,
-				   1, ring_control->tx_data,
-				   ARRAY_SIZE(ring_control->tx_data),
-				   priv->tx_buf_data);
-
-		tasklet_schedule(&priv->rx_tasklet);
-
-	} else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))
+	if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE))
+		tasklet_schedule(&priv->tasklet);
+	else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))
 		complete(&priv->boot_comp);
 
+out:
 	spin_unlock(&priv->lock);
-
 	return reg ? IRQ_HANDLED : IRQ_NONE;
 }
 
@@ -368,7 +370,7 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	unsigned int i;
 	struct p54p_desc *desc;
 
-	tasklet_kill(&priv->rx_tasklet);
+	tasklet_kill(&priv->tasklet);
 
 	P54P_WRITE(int_enable, cpu_to_le32(0));
 	P54P_READ(int_enable);
@@ -559,7 +561,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 	priv->common.tx = p54p_tx;
 
 	spin_lock_init(&priv->lock);
-	tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev);
+	tasklet_init(&priv->tasklet, p54p_tasklet, (unsigned long)dev);
 
 	err = request_firmware(&priv->firmware, "isl3886pci",
 			       &priv->pdev->dev);
diff --git a/drivers/net/wireless/p54/p54pci.h b/drivers/net/wireless/p54/p54pci.h
index fbb683953fb2..2feead617a3b 100644
--- a/drivers/net/wireless/p54/p54pci.h
+++ b/drivers/net/wireless/p54/p54pci.h
@@ -92,7 +92,7 @@ struct p54p_priv {
 	struct p54_common common;
 	struct pci_dev *pdev;
 	struct p54p_csr __iomem *map;
-	struct tasklet_struct rx_tasklet;
+	struct tasklet_struct tasklet;
 	const struct firmware *firmware;
 	spinlock_t lock;
 	struct p54p_ring_control *ring_control;
@@ -101,8 +101,8 @@ struct p54p_priv {
 	u32 rx_idx_mgmt, tx_idx_mgmt;
 	struct sk_buff *rx_buf_data[8];
 	struct sk_buff *rx_buf_mgmt[4];
-	void *tx_buf_data[32];
-	void *tx_buf_mgmt[4];
+	struct sk_buff *tx_buf_data[32];
+	struct sk_buff *tx_buf_mgmt[4];
 	struct completion boot_comp;
 };
 
-- 
cgit v1.2.3


From d41a3552f96673480d7913c170cab31fa00b7697 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 18 Jan 2010 00:21:17 +0100
Subject: b43: N-PHY: add writing one element tables
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 40 +++++++++++++---------------------------
 1 file changed, 13 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 95190d42372c..32f837049ef9 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -808,8 +808,7 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 
 	if (nphy->bb_mult_save & 0x80000000) {
 		tmp = nphy->bb_mult_save & 0xFFFF;
-		/* TODO: Write an N PHY Table with ID 15, length 1, offset 87,
-			width 16 and data from tmp */
+		b43_ntab_write(dev, B43_NTAB16(15, 87), tmp);
 		nphy->bb_mult_save = 0;
 	}
 
@@ -1486,13 +1485,11 @@ static void b43_nphy_update_tx_cal_ladder(struct b43_wldev *dev, u16 core)
 	for (i = 0; i < 18; i++) {
 		scale = (ladder_lo[i].percent * tmp) / 100;
 		entry = ((scale & 0xFF) << 8) | ladder_lo[i].g_env;
-		/* TODO: Write an N PHY Table with ID 15, length 1,
-			offset i, width 16, and data entry */
+		b43_ntab_write(dev, B43_NTAB16(15, i), entry);
 
 		scale = (ladder_iq[i].percent * tmp) / 100;
 		entry = ((scale & 0xFF) << 8) | ladder_iq[i].g_env;
-		/* TODO: Write an N PHY Table with ID 15, length 1,
-			offset i + 32, width 16, and data entry */
+		b43_ntab_write(dev, B43_NTAB16(15, i + 32), entry);
 	}
 }
 
@@ -1590,10 +1587,8 @@ static void b43_nphy_tx_cal_phy_cleanup(struct b43_wldev *dev)
 		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, regs[2]);
 		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[3]);
 		b43_phy_write(dev, B43_NPHY_BBCFG, regs[4]);
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 3,
-			width 16, and data from regs[5] */
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 19,
-			width 16, and data from regs[6] */
+		b43_ntab_write(dev, B43_NTAB16(8, 3), regs[5]);
+		b43_ntab_write(dev, B43_NTAB16(8, 19), regs[6]);
 		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[7]);
 		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[8]);
 		b43_phy_write(dev, B43_NPHY_PAPD_EN0, regs[9]);
@@ -1603,10 +1598,8 @@ static void b43_nphy_tx_cal_phy_cleanup(struct b43_wldev *dev)
 		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, regs[0]);
 		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, regs[1]);
 		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[2]);
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 2,
-			width 16, and data from regs[3] */
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 18,
-			width 16, and data from regs[4] */
+		b43_ntab_write(dev, B43_NTAB16(8, 2), regs[3]);
+		b43_ntab_write(dev, B43_NTAB16(8, 18), regs[4]);
 		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[5]);
 		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[6]);
 	}
@@ -1638,15 +1631,11 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		/* TODO: Read an N PHY Table with ID 8, length 1, offset 3,
 			width 16, and data pointing to tmp */
 		regs[5] = tmp;
-
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 3,
-			width 16, and data 0 */
+		b43_ntab_write(dev, B43_NTAB16(8, 3), 0);
 		/* TODO: Read an N PHY Table with ID 8, length 1, offset 19,
 			width 16, and data pointing to tmp */
 		regs[6] = tmp;
-
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 19,
-			width 16, and data 0 */
+		b43_ntab_write(dev, B43_NTAB16(8, 19), 0);
 		regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
 		regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
 
@@ -1668,14 +1657,12 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 			width 16, and data pointing to tmp */
 		regs[3] = tmp;
 		tmp |= 0x2000;
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 2,
-			width 16, and data pointer tmp */
+		b43_ntab_write(dev, B43_NTAB16(8, 2), tmp);
 		/* TODO: Read an N PHY Table with ID 8, length 1, offset 18,
 			width 16, and data pointer tmp */
 		regs[4] = tmp;
 		tmp |= 0x2000;
-		/* TODO: Write an N PHY Table with ID 8, length 1, offset 18,
-			width 16, and data pointer tmp */
+		b43_ntab_write(dev, B43_NTAB16(8, 18), tmp);
 		regs[5] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
 		regs[6] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
 		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
@@ -1900,9 +1887,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 					width 16, and data pointer buffer */
 				diq_start = buffer[0];
 				buffer[0] = 0;
-				/* TODO: Write an N PHY Table with ID 15,
-					length 1, offset 69 + core, width 16,
-					and data of 0 */
+				b43_ntab_write(dev, B43_NTAB16(15, 69 + core),
+						0);
 			}
 
 			b43_phy_write(dev, B43_NPHY_IQLOCAL_CMD, cmd);
-- 
cgit v1.2.3


From 2581b1434ccba6960e0b671927d87c83b5152c9d Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 18 Jan 2010 00:21:21 +0100
Subject: b43: N-PHY: implement and add multi-dimensional table writing
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       | 58 +++++++++++++++-------------------
 drivers/net/wireless/b43/tables_nphy.c | 40 +++++++++++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h |  2 ++
 3 files changed, 67 insertions(+), 33 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 32f837049ef9..671fbcfdc0ec 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1699,8 +1699,7 @@ static void b43_nphy_restore_cal(struct b43_wldev *dev)
 		loft = &nphy->cal_cache.txcal_coeffs_5G[5];
 	}
 
-	/* TODO: Write an N PHY table with ID 15, length 4, offset 80,
-		width 16, and data from table */
+	b43_ntab_write_bulk(dev, B43_NTAB16(15, 80), 4, table);
 
 	for (i = 0; i < 4; i++) {
 		if (dev->phy.rev >= 3)
@@ -1709,12 +1708,9 @@ static void b43_nphy_restore_cal(struct b43_wldev *dev)
 			coef[i] = 0;
 	}
 
-	/* TODO: Write an N PHY table with ID 15, length 4, offset 88,
-		width 16, and data from coef */
-	/* TODO: Write an N PHY table with ID 15, length 2, offset 85,
-		width 16 and data from loft */
-	/* TODO: Write an N PHY table with ID 15, length 2, offset 93,
-		width 16 and data from loft */
+	b43_ntab_write_bulk(dev, B43_NTAB16(15, 88), 4, coef);
+	b43_ntab_write_bulk(dev, B43_NTAB16(15, 85), 2, loft);
+	b43_ntab_write_bulk(dev, B43_NTAB16(15, 93), 2, loft);
 
 	if (dev->phy.rev < 2)
 		b43_nphy_tx_iq_workaround(dev);
@@ -1782,8 +1778,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		b43_nphy_iq_cal_gain_params(dev, i, target, &params[i]);
 		gain[i] = params[i].cal_gain;
 	}
-	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
-		width 16, and data pointer gain */
+
+	b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x110), 2, gain);
 
 	b43_nphy_tx_cal_radio_setup(dev);
 	b43_nphy_tx_cal_phy_setup(dev);
@@ -1833,8 +1829,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 			}
 		}
 
-		/* TODO: Write an N PHY Table with ID 15, length from above,
-			offset 64, width 16, and the data pointer from above */
+		b43_ntab_write_bulk(dev, B43_NTAB16(15, 64), length, table);
 
 		if (full) {
 			if (dev->phy.rev >= 3)
@@ -1902,9 +1897,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 			/* TODO: Read an N PHY Table with ID 15,
 				length table_length, offset 96, width 16,
 				and data pointer buffer */
-			/* TODO: Write an N PHY Table with ID 15,
-				length table_length, offset 64, width 16,
-				and data pointer buffer */
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 64), length,
+						buffer);
 
 			if (type == 1 || type == 3 || type == 4)
 				buffer[0] = diq_start;
@@ -1916,8 +1910,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		last = (dev->phy.rev < 3) ? 6 : 7;
 
 		if (!mphase || nphy->mphase_cal_phase_id == last) {
-			/* TODO: Write an N PHY Table with ID 15, length 4,
-				offset 96, width 16, and data pointer buffer */
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 96), 4, buffer);
 			/* TODO: Read an N PHY Table with ID 15, length 4,
 				offset 80, width 16, and data pointer buffer */
 			if (dev->phy.rev < 3) {
@@ -1926,14 +1919,14 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 				buffer[2] = 0;
 				buffer[3] = 0;
 			}
-			/* TODO: Write an N PHY Table with ID 15, length 4,
-				offset 88, width 16, and data pointer buffer */
-			/* TODO: Read an N PHY Table with ID 15, length 2,
-				offset 101, width 16, and data pointer buffer*/
-			/* TODO: Write an N PHY Table with ID 15, length 2,
-				offset 85, width 16, and data pointer buffer */
-			/* TODO: Write an N PHY Table with ID 15, length 2,
-				offset 93, width 16, and data pointer buffer */
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 88), 4,
+						buffer);
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 101), 2,
+						buffer);
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 85), 2,
+						buffer);
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 93), 2,
+						buffer);
 			length = 11;
 			if (dev->phy.rev < 3)
 				length -= 2;
@@ -1957,8 +1950,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 	}
 
 	b43_nphy_tx_cal_phy_cleanup(dev);
-	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
-		width 16, and data from save */
+	b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x110), 2, save);
 
 	if (dev->phy.rev < 2 && (!mphase || nphy->mphase_cal_phase_id == last))
 		b43_nphy_tx_iq_workaround(dev);
@@ -2008,8 +2000,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 		b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
 		cal_gain[i] = cal_params[i].cal_gain;
 	}
-	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
-		width 16, and data from cal_gain */
+	b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x110), 2, cal_gain);
 
 	for (i = 0; i < 2; i++) {
 		if (i == 0) {
@@ -2147,8 +2138,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 
 	/* TODO: Call N PHY RF Ctrl Override with 0x400, 0, 3, 1 as arguments*/
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
-	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
-		width 16, and data from gain_save */
+	b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x110), 2, gain_save);
 
 	b43_nphy_stay_in_carrier_search(dev, 0);
 
@@ -2290,8 +2280,10 @@ int b43_phy_initn(struct b43_wldev *dev)
 	if (phy->rev >= 3) {
 		/* TODO */
 	} else {
-		/* TODO Write an N PHY table with ID 26, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */
-		/* TODO Write an N PHY table with ID 27, length 128, offset 192, width 32, and the data from Rev 2 TX Power Control Table */
+		b43_ntab_write_bulk(dev, B43_NTAB32(26, 192), 128,
+					b43_ntab_tx_gain_rev0_1_2);
+		b43_ntab_write_bulk(dev, B43_NTAB32(27, 192), 128,
+					b43_ntab_tx_gain_rev0_1_2);
 	}
 
 	if (nphy->phyrxchain != 3)
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 7dff853ab962..fc08be0b976e 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2952,6 +2952,46 @@ void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value)
 	assert_ntab_array_sizes();
 }
 
+void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
+			  unsigned int nr_elements, const void *_data)
+{
+	u32 type, value;
+	const u8 *data = _data;
+	unsigned int i;
+
+	type = offset & B43_NTAB_TYPEMASK;
+	offset &= ~B43_NTAB_TYPEMASK;
+	B43_WARN_ON(offset > 0xFFFF);
+
+	b43_phy_write(dev, B43_NPHY_TABLE_ADDR, offset);
+
+	for (i = 0; i < nr_elements; i++) {
+		switch (type) {
+		case B43_NTAB_8BIT:
+			value = *data;
+			data++;
+			B43_WARN_ON(value & ~0xFF);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, value);
+			break;
+		case B43_NTAB_16BIT:
+			value = *((u16 *)data);
+			data += 2;
+			B43_WARN_ON(value & ~0xFFFF);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, value);
+			break;
+		case B43_NTAB_32BIT:
+			value = *((u32 *)data);
+			data += 4;
+			b43_phy_write(dev, B43_NPHY_TABLE_DATAHI, value >> 16);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					value & 0xFFFF);
+			break;
+		default:
+			B43_WARN_ON(1);
+		}
+	}
+}
+
 #define ntab_upload(dev, offset, data) do { \
 		unsigned int i;						\
 		for (i = 0; i < (offset##_SIZE); i++)			\
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 51636d02f8b1..d5605df5d6b8 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -143,6 +143,8 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel);
 #define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL_REV3		12
 
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
+void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
+			  unsigned int nr_elements, const void *_data);
 
 void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev);
 void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev);
-- 
cgit v1.2.3


From c643a66ef5ccfd4d359327fb8afa9949f1abbfdd Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 18 Jan 2010 00:21:27 +0100
Subject: b43: N-PHY: implement and add reading one element tables
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       | 18 +++++++-----------
 drivers/net/wireless/b43/tables_nphy.c | 31 +++++++++++++++++++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h |  1 +
 3 files changed, 39 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 671fbcfdc0ec..7eac0ae2b15e 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1628,12 +1628,11 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		regs[4] = b43_phy_read(dev, B43_NPHY_BBCFG);
 		b43_phy_mask(dev, B43_NPHY_BBCFG, ~B43_NPHY_BBCFG_RSTRX);
 
-		/* TODO: Read an N PHY Table with ID 8, length 1, offset 3,
-			width 16, and data pointing to tmp */
+		tmp = b43_ntab_read(dev, B43_NTAB16(8, 3));
 		regs[5] = tmp;
 		b43_ntab_write(dev, B43_NTAB16(8, 3), 0);
-		/* TODO: Read an N PHY Table with ID 8, length 1, offset 19,
-			width 16, and data pointing to tmp */
+
+		tmp = b43_ntab_read(dev, B43_NTAB16(8, 19));
 		regs[6] = tmp;
 		b43_ntab_write(dev, B43_NTAB16(8, 19), 0);
 		regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
@@ -1653,13 +1652,11 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
 		regs[2] = tmp;
 		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp | 0x3000);
-		/* TODO: Read an N PHY Table with ID 8, length 1, offset 2,
-			width 16, and data pointing to tmp */
+		tmp = b43_ntab_read(dev, B43_NTAB16(8, 2));
 		regs[3] = tmp;
 		tmp |= 0x2000;
 		b43_ntab_write(dev, B43_NTAB16(8, 2), tmp);
-		/* TODO: Read an N PHY Table with ID 8, length 1, offset 18,
-			width 16, and data pointer tmp */
+		tmp = b43_ntab_read(dev, B43_NTAB16(8, 18));
 		regs[4] = tmp;
 		tmp |= 0x2000;
 		b43_ntab_write(dev, B43_NTAB16(8, 18), tmp);
@@ -1877,9 +1874,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 			b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDNNUM, tmp);
 
 			if (type == 1 || type == 3 || type == 4) {
-				/* TODO: Read an N PHY Table with ID 15,
-					length 1, offset 69 + core,
-					width 16, and data pointer buffer */
+				buffer[0] = b43_ntab_read(dev,
+						B43_NTAB16(15, 69 + core));
 				diq_start = buffer[0];
 				buffer[0] = 0;
 				b43_ntab_write(dev, B43_NTAB16(15, 69 + core),
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index fc08be0b976e..b8aed456da1f 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2919,6 +2919,37 @@ static inline void assert_ntab_array_sizes(void)
 #undef check
 }
 
+u32 b43_ntab_read(struct b43_wldev *dev, u32 offset)
+{
+	u32 type, value;
+
+	type = offset & B43_NTAB_TYPEMASK;
+	offset &= ~B43_NTAB_TYPEMASK;
+	B43_WARN_ON(offset > 0xFFFF);
+
+	switch (type) {
+	case B43_NTAB_8BIT:
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, offset);
+		value = b43_phy_read(dev, B43_NPHY_TABLE_DATALO) & 0xFF;
+		break;
+	case B43_NTAB_16BIT:
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, offset);
+		value = b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+		break;
+	case B43_NTAB_32BIT:
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, offset);
+		value = b43_phy_read(dev, B43_NPHY_TABLE_DATAHI);
+		value <<= 16;
+		value |= b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+		break;
+	default:
+		B43_WARN_ON(1);
+		value = 0;
+	}
+
+	return value;
+}
+
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value)
 {
 	u32 type;
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index d5605df5d6b8..64e990a14de3 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -142,6 +142,7 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel);
 #define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL		10
 #define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL_REV3		12
 
+u32 b43_ntab_read(struct b43_wldev *dev, u32 offset);
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
 void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
 			  unsigned int nr_elements, const void *_data);
-- 
cgit v1.2.3


From 9145834e84805f5efcca4706edfd641047af1d55 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 18 Jan 2010 00:21:35 +0100
Subject: b43: N-PHY: implement and add multi-dimensional table reading
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       | 30 +++++++++++------------------
 drivers/net/wireless/b43/tables_nphy.c | 35 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h |  2 ++
 3 files changed, 48 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 7eac0ae2b15e..1359267a35ff 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -829,8 +829,7 @@ static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, true);
 
-	/* TODO: Read an N PHY Table with ID 15, length 7, offset 80,
-		width 16, and data pointer buffer */
+	b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 7, buffer);
 
 	for (i = 0; i < 2; i++) {
 		tmp = ((buffer[i * 2] & 0x3FF) << 10) |
@@ -1507,8 +1506,7 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 
 		if (nphy->hang_avoid)
 			b43_nphy_stay_in_carrier_search(dev, true);
-		/* TODO: Read an N PHY Table with ID 7, length 2,
-			offset 0x110, width 16, and curr_gain */
+		b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, curr_gain);
 		if (nphy->hang_avoid)
 			b43_nphy_stay_in_carrier_search(dev, false);
 
@@ -1768,8 +1766,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		nphy->hang_avoid = 0;
 	}
 
-	/* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
-		width 16, and data pointer save */
+	b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, save);
 
 	for (i = 0; i < 2; i++) {
 		b43_nphy_iq_cal_gain_params(dev, i, target, &params[i]);
@@ -1890,9 +1887,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 				udelay(10);
 			}
 
-			/* TODO: Read an N PHY Table with ID 15,
-				length table_length, offset 96, width 16,
-				and data pointer buffer */
+			b43_ntab_read_bulk(dev, B43_NTAB16(15, 96), length,
+						buffer);
 			b43_ntab_write_bulk(dev, B43_NTAB16(15, 64), length,
 						buffer);
 
@@ -1907,8 +1903,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 
 		if (!mphase || nphy->mphase_cal_phase_id == last) {
 			b43_ntab_write_bulk(dev, B43_NTAB16(15, 96), 4, buffer);
-			/* TODO: Read an N PHY Table with ID 15, length 4,
-				offset 80, width 16, and data pointer buffer */
+			b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 4, buffer);
 			if (dev->phy.rev < 3) {
 				buffer[0] = 0;
 				buffer[1] = 0;
@@ -1926,9 +1921,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 			length = 11;
 			if (dev->phy.rev < 3)
 				length -= 2;
-			/* TODO: Read an N PHY Table with ID 15, length length,
-				offset 96, width 16, and data pointer
-				nphy->txiqlocal_bestc */
+			b43_ntab_read_bulk(dev, B43_NTAB16(15, 96), length,
+						nphy->txiqlocal_bestc);
 			nphy->txiqlocal_coeffsvalid = true;
 			/* TODO: Set nphy->txiqlocal_chanspec to
 				the current channel */
@@ -1936,9 +1930,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 			length = 11;
 			if (dev->phy.rev < 3)
 				length -= 2;
-			/* TODO: Read an N PHY Table with ID 5, length length,
-				offset 96, width 16, and data pointer
-				nphy->mphase_txcal_bestcoeffs */
+			b43_ntab_read_bulk(dev, B43_NTAB16(15, 96), length,
+						nphy->mphase_txcal_bestcoeffs);
 		}
 
 		b43_nphy_stop_playback(dev);
@@ -1990,8 +1983,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 
 	if (dev->phy.rev < 2)
 		;/* TODO: Call N PHY Reapply TX Cal Coeffs */
-	/* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
-		width 16, and data gain_save */
+	b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, gain_save);
 	for (i = 0; i < 2; i++) {
 		b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
 		cal_gain[i] = cal_params[i].cal_gain;
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index b8aed456da1f..b8c9fc619ab1 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2950,6 +2950,41 @@ u32 b43_ntab_read(struct b43_wldev *dev, u32 offset)
 	return value;
 }
 
+void b43_ntab_read_bulk(struct b43_wldev *dev, u32 offset,
+			 unsigned int nr_elements, void *_data)
+{
+	u32 type;
+	u8 *data = _data;
+	unsigned int i;
+
+	type = offset & B43_NTAB_TYPEMASK;
+	offset &= ~B43_NTAB_TYPEMASK;
+	B43_WARN_ON(offset > 0xFFFF);
+
+	b43_phy_write(dev, B43_NPHY_TABLE_ADDR, offset);
+
+	for (i = 0; i < nr_elements; i++) {
+		switch (type) {
+		case B43_NTAB_8BIT:
+			*data = b43_phy_read(dev, B43_NPHY_TABLE_DATALO) & 0xFF;
+			data++;
+			break;
+		case B43_NTAB_16BIT:
+			*((u16 *)data) = b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+			data += 2;
+			break;
+		case B43_NTAB_32BIT:
+			*((u32 *)data) = b43_phy_read(dev, B43_NPHY_TABLE_DATAHI);
+			*((u32 *)data) <<= 16;
+			*((u32 *)data) |= b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+			data += 4;
+			break;
+		default:
+			B43_WARN_ON(1);
+		}
+	}
+}
+
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value)
 {
 	u32 type;
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 64e990a14de3..6bbef894010c 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -143,6 +143,8 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel);
 #define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL_REV3		12
 
 u32 b43_ntab_read(struct b43_wldev *dev, u32 offset);
+void b43_ntab_read_bulk(struct b43_wldev *dev, u32 offset,
+			 unsigned int nr_elements, void *_data);
 void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
 void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
 			  unsigned int nr_elements, const void *_data);
-- 
cgit v1.2.3


From de9a47f92795f697964f662415cb27816c2d9b76 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 18 Jan 2010 00:21:49 +0100
Subject: b43: N-PHY: silence warnings, add missing call
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 1359267a35ff..e77f1f24d101 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1624,7 +1624,7 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp | 0x0600);
 
 		regs[4] = b43_phy_read(dev, B43_NPHY_BBCFG);
-		b43_phy_mask(dev, B43_NPHY_BBCFG, ~B43_NPHY_BBCFG_RSTRX);
+		b43_phy_mask(dev, B43_NPHY_BBCFG, (u16)~B43_NPHY_BBCFG_RSTRX);
 
 		tmp = b43_ntab_read(dev, B43_NTAB16(8, 3));
 		regs[5] = tmp;
@@ -1970,7 +1970,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 	u16 lna[3] = { 3, 3, 1 };
 	u16 hpf1[3] = { 7, 2, 0 };
 	u16 hpf2[3] = { 2, 0, 0 };
-	u32 power[3];
+	u32 power[3] = { };
 	u16 gain_save[2];
 	u16 cal_gain[2];
 	struct nphy_iqcal_params cal_params[2];
@@ -2077,7 +2077,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 					(cur_lna << 2));
 			/* TODO:Call N PHY RF Ctrl Override with 0x400, tmp[0],
 				3, 0 as arguments */
-			/* TODO: Call N PHY Force RF Seq with 2 as argument */
+			b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
 			b43_nphy_stop_playback(dev);
 
 			if (playtone) {
-- 
cgit v1.2.3


From 1625c148cde23a8b4180e171ed4a17e17521b995 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Tue, 19 Jan 2010 00:19:21 +0100
Subject: libertas: Set/clear WPA keys before the WEP ones

With the v10 firmware running on 8688 HW, clearing WPA keys after setting the
WEP key prevents us from being able to associate with WEP APs.
Swapping the calling order for assoc_helper_wpa_keys() and
assoc_helper_wep_keys fixes that issue.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/assoc.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 5e650f358415..fb3dff0fdfa8 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -2052,13 +2052,6 @@ void lbs_association_worker(struct work_struct *work)
 			goto out;
 	}
 
-	if (   test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
-		ret = assoc_helper_wep_keys(priv, assoc_req);
-		if (ret)
-			goto out;
-	}
-
 	if (test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) {
 		ret = assoc_helper_secinfo(priv, assoc_req);
 		if (ret)
@@ -2078,6 +2071,14 @@ void lbs_association_worker(struct work_struct *work)
 			goto out;
 	}
 
+	if (   test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags)
+	    || test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
+		ret = assoc_helper_wep_keys(priv, assoc_req);
+		if (ret)
+			goto out;
+	}
+
+
 	/* SSID/BSSID should be the _last_ config option set, because they
 	 * trigger the association attempt.
 	 */
-- 
cgit v1.2.3


From c9f6a6567f3e8dd69dd3f80a67e73d7d10884bea Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Tue, 19 Jan 2010 14:04:19 -0500
Subject: ath9k: make tx power config changes take effect immediatley

Users wishing to tweak tx power want it to happen immediately,
try to respect that. This was tested by Lorenzo by measuring the
received signal strength from an AP with ath9k and the patch.

Changing the tx power on the AP produced these results:

1) iwconfig wlan0 txpower 20 ---> Rx power -37dbm
2) iwconfig wlan0 txpower 15 ---> Rx power -41dbm
3) iwconfig wlan0 txpower 10 ---> Rx power -45dbm
4) iwconfig wlan0 txpower 5 ---> Rx power -51dbm
5) iwconfig wlan0 txpower 0 ---> Rx power -37dbm

The result with 0 is an anomoly and would need to be
addressed through a separate patch.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c0c571c2e8c4..6f3e71c5071e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1624,8 +1624,10 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 skip_chan_change:
-	if (changed & IEEE80211_CONF_CHANGE_POWER)
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
 		sc->config.txpowlimit = 2 * conf->power_level;
+		ath_update_txpow(sc);
+	}
 
 	spin_lock_bh(&sc->wiphy_lock);
 	disable_radio = ath9k_all_wiphys_idle(sc);
-- 
cgit v1.2.3


From 64147c729732ba9c9e50966971bdfbd503c888bb Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 19 Jan 2010 17:07:41 -0500
Subject: libertas/assoc.c: rearrange some strange line breaks

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/assoc.c | 62 +++++++++++++++++------------------
 1 file changed, 30 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index fb3dff0fdfa8..0979b07799a0 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -1160,11 +1160,11 @@ int lbs_adhoc_stop(struct lbs_private *priv)
 static inline int match_bss_no_security(struct lbs_802_11_security *secinfo,
 					struct bss_descriptor *match_bss)
 {
-	if (!secinfo->wep_enabled  && !secinfo->WPAenabled
-	    && !secinfo->WPA2enabled
-	    && match_bss->wpa_ie[0] != WLAN_EID_GENERIC
-	    && match_bss->rsn_ie[0] != WLAN_EID_RSN
-	    && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+	if (!secinfo->wep_enabled &&
+	    !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+	    match_bss->wpa_ie[0] != WLAN_EID_GENERIC &&
+	    match_bss->rsn_ie[0] != WLAN_EID_RSN &&
+	    !(match_bss->capability & WLAN_CAPABILITY_PRIVACY))
 		return 1;
 	else
 		return 0;
@@ -1173,9 +1173,9 @@ static inline int match_bss_no_security(struct lbs_802_11_security *secinfo,
 static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo,
 				       struct bss_descriptor *match_bss)
 {
-	if (secinfo->wep_enabled && !secinfo->WPAenabled
-	    && !secinfo->WPA2enabled
-	    && (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+	if (secinfo->wep_enabled &&
+	    !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+	    (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
 		return 1;
 	else
 		return 0;
@@ -1184,8 +1184,8 @@ static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo,
 static inline int match_bss_wpa(struct lbs_802_11_security *secinfo,
 				struct bss_descriptor *match_bss)
 {
-	if (!secinfo->wep_enabled && secinfo->WPAenabled
-	    && (match_bss->wpa_ie[0] == WLAN_EID_GENERIC)
+	if (!secinfo->wep_enabled && secinfo->WPAenabled &&
+	    (match_bss->wpa_ie[0] == WLAN_EID_GENERIC)
 	    /* privacy bit may NOT be set in some APs like LinkSys WRT54G
 	    && (match_bss->capability & WLAN_CAPABILITY_PRIVACY) */
 	   )
@@ -1210,11 +1210,11 @@ static inline int match_bss_wpa2(struct lbs_802_11_security *secinfo,
 static inline int match_bss_dynamic_wep(struct lbs_802_11_security *secinfo,
 					struct bss_descriptor *match_bss)
 {
-	if (!secinfo->wep_enabled && !secinfo->WPAenabled
-	    && !secinfo->WPA2enabled
-	    && (match_bss->wpa_ie[0] != WLAN_EID_GENERIC)
-	    && (match_bss->rsn_ie[0] != WLAN_EID_RSN)
-	    && (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+	if (!secinfo->wep_enabled &&
+	    !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+	    (match_bss->wpa_ie[0] != WLAN_EID_GENERIC) &&
+	    (match_bss->rsn_ie[0] != WLAN_EID_RSN) &&
+	    (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
 		return 1;
 	else
 		return 0;
@@ -1525,8 +1525,8 @@ static int assoc_helper_associate(struct lbs_private *priv,
 	/* If we're given and 'any' BSSID, try associating based on SSID */
 
 	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
-		if (compare_ether_addr(bssid_any, assoc_req->bssid)
-		    && compare_ether_addr(bssid_off, assoc_req->bssid)) {
+		if (compare_ether_addr(bssid_any, assoc_req->bssid) &&
+		    compare_ether_addr(bssid_off, assoc_req->bssid)) {
 			ret = assoc_helper_bssid(priv, assoc_req);
 			done = 1;
 		}
@@ -1612,11 +1612,9 @@ static int assoc_helper_channel(struct lbs_private *priv,
 		goto restore_mesh;
 	}
 
-	if (   assoc_req->secinfo.wep_enabled
-	    &&   (assoc_req->wep_keys[0].len
-	       || assoc_req->wep_keys[1].len
-	       || assoc_req->wep_keys[2].len
-	       || assoc_req->wep_keys[3].len)) {
+	if (assoc_req->secinfo.wep_enabled &&
+	    (assoc_req->wep_keys[0].len || assoc_req->wep_keys[1].len ||
+	     assoc_req->wep_keys[2].len || assoc_req->wep_keys[3].len)) {
 		/* Make sure WEP keys are re-sent to firmware */
 		set_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags);
 	}
@@ -1983,14 +1981,14 @@ void lbs_association_worker(struct work_struct *work)
 		assoc_req->secinfo.auth_mode);
 
 	/* If 'any' SSID was specified, find an SSID to associate with */
-	if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)
-	    && !assoc_req->ssid_len)
+	if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags) &&
+	    !assoc_req->ssid_len)
 		find_any_ssid = 1;
 
 	/* But don't use 'any' SSID if there's a valid locked BSSID to use */
 	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
-		if (compare_ether_addr(assoc_req->bssid, bssid_any)
-		    && compare_ether_addr(assoc_req->bssid, bssid_off))
+		if (compare_ether_addr(assoc_req->bssid, bssid_any) &&
+		    compare_ether_addr(assoc_req->bssid, bssid_off))
 			find_any_ssid = 0;
 	}
 
@@ -2064,15 +2062,15 @@ void lbs_association_worker(struct work_struct *work)
 			goto out;
 	}
 
-	if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
+	if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags) ||
+	    test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
 		ret = assoc_helper_wpa_keys(priv, assoc_req);
 		if (ret)
 			goto out;
 	}
 
-	if (   test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
+	if (test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags) ||
+	    test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
 		ret = assoc_helper_wep_keys(priv, assoc_req);
 		if (ret)
 			goto out;
@@ -2082,8 +2080,8 @@ void lbs_association_worker(struct work_struct *work)
 	/* SSID/BSSID should be the _last_ config option set, because they
 	 * trigger the association attempt.
 	 */
-	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
+	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags) ||
+	    test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
 		int success = 1;
 
 		ret = assoc_helper_associate(priv, assoc_req);
-- 
cgit v1.2.3


From 74401773f80b6d42f7a4c6994ca0cca883b03745 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 19 Jan 2010 20:51:32 +0100
Subject: ath9k: fix beacon slot/buffer leak

When cleaning up beacon buffers and slots, ath9k currently checks if
sc->ah->opmode is set to a beacon related mode before cleaning up
buffers.
An unfortunate ordering of interface up/down commands can lead to
sc->ah->opmode being set to monitor mode, while there are AP interfaces
present on the same wiphy.
Always cleaning up beacon buffers if present fixes this issue.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 996eb90263cc..643bea35686f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2655,10 +2655,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
 		ath9k_ps_wakeup(sc);
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-		ath_beacon_return(sc, avp);
 		ath9k_ps_restore(sc);
 	}
 
+	ath_beacon_return(sc, avp);
 	sc->sc_flags &= ~SC_OP_BEACONS;
 
 	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
-- 
cgit v1.2.3


From c1fa347f20f17f14a4a1575727fa24340e8a9117 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 19 Jan 2010 14:21:45 +0000
Subject: e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in
 *_tx_map()

The variable count and i are unsigned so the (<|>=)0 tests do not work.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 10 +++++-----
 drivers/net/e1000e/netdev.c    | 10 +++++-----
 drivers/net/igbvf/netdev.c     | 10 +++++-----
 drivers/net/ixgb/ixgb_main.c   | 10 +++++-----
 drivers/net/ixgbe/ixgbe_main.c | 10 +++++-----
 5 files changed, 25 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 7e855f9bbd97..b3f67b41627f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2802,13 +2802,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		e1000_unmap_and_free_tx_resource(adapter, buffer_info);
 	}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c45965a256b6..f91f247ed6af 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3962,13 +3962,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		e1000_put_txbuf(adapter, buffer_info);;
 	}
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 0dbd0320023a..10e038adba0f 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2163,14 +2163,14 @@ dma_error:
 	buffer_info->length = 0;
 	buffer_info->next_to_watch = 0;
 	buffer_info->mapped_as_page = false;
-	count--;
+	if (count)
+		count--;
 
 	/* clear timestamp and dma mappings for remaining portion of packet */
-	while (count >= 0) {
-		count--;
-		i--;
-		if (i < 0)
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		igbvf_put_txbuf(adapter, buffer_info);
 	}
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index bcd0f01d5feb..593d1a4f217c 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1363,13 +1363,13 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
 	}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 9c9202f40b10..6d61add27a06 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5167,14 +5167,14 @@ dma_error:
 	tx_buffer_info->dma = 0;
 	tx_buffer_info->time_stamp = 0;
 	tx_buffer_info->next_to_watch = 0;
-	count--;
+	if (count)
+		count--;
 
 	/* clear timestamp and dma mappings for remaining portion of packet */
-	while (count >= 0) {
-		count--;
-		i--;
-		if (i < 0)
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		tx_buffer_info = &tx_ring->tx_buffer_info[i];
 		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
 	}
-- 
cgit v1.2.3


From 40a14deaf411592b57cb0720f0e8004293ab9865 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Tue, 19 Jan 2010 14:15:38 +0000
Subject: e1000: enhance frame fragment detection

Originally From: Neil Horman <nhorman@tuxdriver.com>
Modified by: Jesse Brandeburg <jesse.brandeburg@intel.com>

Hey all-
	A security discussion was recently given:
http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html
And a patch that I submitted awhile back was brought up.  Apparently some of
their testing revealed that they were able to force a buffer fragment in e1000
in which the trailing fragment was greater than 4 bytes.  As a result the
fragment check I introduced failed to detect the fragement and a partial
invalid frame was passed up into the network stack.  I've written this patch
to correct it.  I'm in the process of testing it now, but it makes good
logical sense to me.  Effectively it maintains a per-adapter state variable
which detects a non-EOP frame, and discards it and subsequent non-EOP frames
leading up to _and_ _including_ the next positive-EOP frame (as it is by
definition the last fragment).  This should prevent any and all partial frames
from entering the network stack from e1000.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000.h      |  2 ++
 drivers/net/e1000/e1000_main.c | 13 +++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 2a567df3ea71..e8932db7ee77 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -326,6 +326,8 @@ struct e1000_adapter {
 	/* for ioport free */
 	int bars;
 	int need_ioport;
+
+	bool discarding;
 };
 
 enum e1000_state_t {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b3f67b41627f..a53a2017c537 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3850,13 +3850,22 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 
 		length = le16_to_cpu(rx_desc->length);
 		/* !EOP means multiple descriptors were used to store a single
-		 * packet, also make sure the frame isn't just CRC only */
-		if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
+		 * packet, if thats the case we need to toss it.  In fact, we
+		 * to toss every packet with the EOP bit clear and the next
+		 * frame that _does_ have the EOP bit set, as it is by
+		 * definition only a frame fragment
+		 */
+		if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+			adapter->discarding = true;
+
+		if (adapter->discarding) {
 			/* All receives must fit into a single buffer */
 			E1000_DBG("%s: Receive packet consumed multiple"
 				  " buffers\n", netdev->name);
 			/* recycle */
 			buffer_info->skb = skb;
+			if (status & E1000_RXD_STAT_EOP)
+				adapter->discarding = false;
 			goto next_desc;
 		}
 
-- 
cgit v1.2.3


From b94b50289622e816adc9f94111cfc2679c80177c Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Tue, 19 Jan 2010 14:15:59 +0000
Subject: e1000e: enhance frame fragment detection

Originally patched by Neil Horman <nhorman@tuxdriver.com>

e1000e could with a jumbo frame enabled interface, and packet split disabled,
receive a packet that would overflow a single rx buffer.  While in practice
very hard to craft a packet that could abuse this, it is possible.

this is related to CVE-2009-4538

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/e1000.h  |  1 +
 drivers/net/e1000e/netdev.c | 25 +++++++++++++++++++++----
 2 files changed, 22 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index d6ee28f6ea08..d236efaf7478 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -421,6 +421,7 @@ struct e1000_info {
 /* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
 #define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
+#define FLAG2_IS_DISCARDING               (1 << 2)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index f91f247ed6af..1ea395b6c992 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -450,13 +450,23 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 
 		length = le16_to_cpu(rx_desc->length);
 
-		/* !EOP means multiple descriptors were used to store a single
-		 * packet, also make sure the frame isn't just CRC only */
-		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
+		/*
+		 * !EOP means multiple descriptors were used to store a single
+		 * packet, if that's the case we need to toss it.  In fact, we
+		 * need to toss every packet with the EOP bit clear and the
+		 * next frame that _does_ have the EOP bit set, as it is by
+		 * definition only a frame fragment
+		 */
+		if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 			/* All receives must fit into a single buffer */
 			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
+			if (status & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
@@ -745,10 +755,16 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				 PCI_DMA_FROMDEVICE);
 		buffer_info->dma = 0;
 
-		if (!(staterr & E1000_RXD_STAT_EOP)) {
+		/* see !EOP comment in other rx routine */
+		if (!(staterr & E1000_RXD_STAT_EOP))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 			e_dbg("Packet Split buffers didn't pick up the full "
 			      "packet\n");
 			dev_kfree_skb_irq(skb);
+			if (staterr & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
@@ -1118,6 +1134,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
+	adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 
 	writel(0, adapter->hw.hw_addr + rx_ring->head);
 	writel(0, adapter->hw.hw_addr + rx_ring->tail);
-- 
cgit v1.2.3


From 614b05900ec3516b835cd06f848ef6bc915beeea Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:02 +0000
Subject: tg3: Enable PLL PD when CLKREQ disabled for 5717A0

PCIe PLL power down cannot be used if CLKREQ is enabled because data
corruption will occur.  If CLKREQ is disabled though, enabling PCIE P1
PLL power-down saves some power.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 16 ++++++++++++++++
 drivers/net/tg3.h | 14 ++++++++++++++
 2 files changed, 30 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b0630cd093a3..b80e7eef8af9 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7569,6 +7569,20 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
 	}
 
+	if (tp->tg3_flags3 & TG3_FLG3_L1PLLPD_EN) {
+		u32 grc_mode = tr32(GRC_MODE);
+
+		/* Access the lower 1K of PL PCIE block registers. */
+		val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
+		tw32(GRC_MODE, val | GRC_MODE_PCIE_PL_SEL);
+
+		val = tr32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL1);
+		tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL1,
+		     val | TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN);
+
+		tw32(GRC_MODE, grc_mode);
+	}
+
 	/* This works around an issue with Athlon chipsets on
 	 * B3 tigon3 silicon.  This bit has no effect on any
 	 * other revision.  But do not set this on PCI Express
@@ -13096,6 +13110,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
 			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A1)
 				tp->tg3_flags3 |= TG3_FLG3_CLKREQ_BUG;
+		} else if (tp->pci_chip_rev_id == CHIPREV_ID_5717_A0) {
+			tp->tg3_flags3 |= TG3_FLG3_L1PLLPD_EN;
 		}
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
 		tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cd30889650f8..44a505d07e20 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1540,6 +1540,8 @@
 #define  GRC_MODE_HOST_SENDBDS		0x00020000
 #define  GRC_MODE_NO_TX_PHDR_CSUM	0x00100000
 #define  GRC_MODE_NVRAM_WR_ENABLE	0x00200000
+#define  GRC_MODE_PCIE_TL_SEL		0x00000000
+#define  GRC_MODE_PCIE_PL_SEL		0x00400000
 #define  GRC_MODE_NO_RX_PHDR_CSUM	0x00800000
 #define  GRC_MODE_IRQ_ON_TX_CPU_ATTN	0x01000000
 #define  GRC_MODE_IRQ_ON_RX_CPU_ATTN	0x02000000
@@ -1547,7 +1549,13 @@
 #define  GRC_MODE_IRQ_ON_DMA_ATTN	0x08000000
 #define  GRC_MODE_IRQ_ON_FLOW_ATTN	0x10000000
 #define  GRC_MODE_4X_NIC_SEND_RINGS	0x20000000
+#define  GRC_MODE_PCIE_DL_SEL		0x20000000
 #define  GRC_MODE_MCAST_FRM_ENABLE	0x40000000
+#define  GRC_MODE_PCIE_HI_1K_EN		0x80000000
+#define  GRC_MODE_PCIE_PORT_MASK	(GRC_MODE_PCIE_TL_SEL | \
+					 GRC_MODE_PCIE_PL_SEL | \
+					 GRC_MODE_PCIE_DL_SEL | \
+					 GRC_MODE_PCIE_HI_1K_EN)
 #define GRC_MISC_CFG			0x00006804
 #define  GRC_MISC_CFG_CORECLK_RESET	0x00000001
 #define  GRC_MISC_CFG_PRESCALAR_MASK	0x000000fe
@@ -1801,6 +1809,11 @@
 /* 0x7e74 --> 0x8000 unused */
 
 
+/* Alternate PCIE definitions */
+#define TG3_PCIE_TLDLPL_PORT		0x00007c00
+#define TG3_PCIE_PL_LO_PHYCTL1		 0x00000004
+#define TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN	  0x00001000
+
 /* OTP bit definitions */
 #define TG3_OTP_AGCTGT_MASK		0x000000e0
 #define TG3_OTP_AGCTGT_SHIFT		1
@@ -2809,6 +2822,7 @@ struct tg3 {
 #define TG3_FLG3_40BIT_DMA_LIMIT_BUG	0x00100000
 #define TG3_FLG3_SHORT_DMA_BUG		0x00200000
 #define TG3_FLG3_USE_JUMBO_BDFLAG	0x00400000
+#define TG3_FLG3_L1PLLPD_EN		0x00800000
 
 	struct timer_list		timer;
 	u16				timer_counter;
-- 
cgit v1.2.3


From 666bc831cf820e16cbd0c2d5be780c512b1afe15 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:03 +0000
Subject: tg3: Improve internal resource allocations

The 5717 and the 57765 have more resources at their disposal internally.
This patch tunes the driver to get better performance.  The adjustments
made here only apply to the 57765 and 5717 asic revs.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 25 +++++++++++++++++++++----
 drivers/net/tg3.h |  4 ++++
 2 files changed, 25 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b80e7eef8af9..adb579f0d75d 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -8152,7 +8152,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	/* Prevent chip from dropping frames when flow control
 	 * is enabled.
 	 */
-	tw32_f(MAC_LOW_WMARK_MAX_RX_FRAME, 2);
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		val = 1;
+	else
+		val = 2;
+	tw32_f(MAC_LOW_WMARK_MAX_RX_FRAME, val);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
 	    (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
@@ -14091,9 +14095,22 @@ static void __devinit tg3_init_link_config(struct tg3 *tp)
 
 static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
 {
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
+		tp->bufmgr_config.mbuf_read_dma_low_water =
+			DEFAULT_MB_RDMA_LOW_WATER_5705;
+		tp->bufmgr_config.mbuf_mac_rx_low_water =
+			DEFAULT_MB_MACRX_LOW_WATER_57765;
+		tp->bufmgr_config.mbuf_high_water =
+			DEFAULT_MB_HIGH_WATER_57765;
+
+		tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
+			DEFAULT_MB_RDMA_LOW_WATER_5705;
+		tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
+			DEFAULT_MB_MACRX_LOW_WATER_JUMBO_57765;
+		tp->bufmgr_config.mbuf_high_water_jumbo =
+			DEFAULT_MB_HIGH_WATER_JUMBO_57765;
+	} else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
 		tp->bufmgr_config.mbuf_read_dma_low_water =
 			DEFAULT_MB_RDMA_LOW_WATER_5705;
 		tp->bufmgr_config.mbuf_mac_rx_low_water =
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 44a505d07e20..91139fdf7f43 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1203,14 +1203,18 @@
 #define  DEFAULT_MB_MACRX_LOW_WATER	  0x00000020
 #define  DEFAULT_MB_MACRX_LOW_WATER_5705  0x00000010
 #define  DEFAULT_MB_MACRX_LOW_WATER_5906  0x00000004
+#define  DEFAULT_MB_MACRX_LOW_WATER_57765 0x0000002a
 #define  DEFAULT_MB_MACRX_LOW_WATER_JUMBO 0x00000098
 #define  DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780 0x0000004b
+#define  DEFAULT_MB_MACRX_LOW_WATER_JUMBO_57765 0x0000007e
 #define BUFMGR_MB_HIGH_WATER		0x00004418
 #define  DEFAULT_MB_HIGH_WATER		 0x00000060
 #define  DEFAULT_MB_HIGH_WATER_5705	 0x00000060
 #define  DEFAULT_MB_HIGH_WATER_5906	 0x00000010
+#define  DEFAULT_MB_HIGH_WATER_57765	 0x000000a0
 #define  DEFAULT_MB_HIGH_WATER_JUMBO	 0x0000017c
 #define  DEFAULT_MB_HIGH_WATER_JUMBO_5780 0x00000096
+#define  DEFAULT_MB_HIGH_WATER_JUMBO_57765 0x000000ea
 #define BUFMGR_RX_MB_ALLOC_REQ		0x0000441c
 #define  BUFMGR_MB_ALLOC_BIT		 0x10000000
 #define BUFMGR_RX_MB_ALLOC_RESP		0x00004420
-- 
cgit v1.2.3


From 9b952f51d019db37276bdb2924e776ca09132fc1 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:04 +0000
Subject: tg3: Add 5717 serdes phy ID

The serdes and copper phys of the 5717 asic rev have different phy IDs.
This patch adds the serdes phy ID.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 3 ++-
 drivers/net/tg3.h | 6 ++++--
 2 files changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index adb579f0d75d..4a653478edd6 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -14170,7 +14170,8 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
 	case PHY_ID_BCM5756:	return "5722/5756";
 	case PHY_ID_BCM5906:	return "5906";
 	case PHY_ID_BCM5761:	return "5761";
-	case PHY_ID_BCM5717:	return "5717";
+	case PHY_ID_BCM5718C:	return "5718C";
+	case PHY_ID_BCM5718S:	return "5718S";
 	case PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 91139fdf7f43..edb7a14cf58f 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2893,7 +2893,8 @@ struct tg3 {
 #define PHY_ID_BCM5756			0xbc050ed0
 #define PHY_ID_BCM5784			0xbc050fa0
 #define PHY_ID_BCM5761			0xbc050fd0
-#define PHY_ID_BCM5717			0x5c0d8a00
+#define PHY_ID_BCM5718C			0x5c0d8a00
+#define PHY_ID_BCM5718S			0xbc050ff0
 #define PHY_ID_BCM5906			0xdc00ac40
 #define PHY_ID_BCM8002			0x60010140
 #define PHY_ID_INVALID			0xffffffff
@@ -2936,7 +2937,8 @@ struct tg3 {
 	 (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
 	 (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
 	 (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
-	 (X) == PHY_ID_BCM5717 || (X) == PHY_ID_BCM8002)
+	 (X) == PHY_ID_BCM5718C || (X) == PHY_ID_BCM5718S || \
+	 (X) == PHY_ID_BCM8002)
 
 	struct tg3_hw_stats		*hw_stats;
 	dma_addr_t			stats_mapping;
-- 
cgit v1.2.3


From ecf1410b9d70b3034e5955e92bb0c3e02ff21e9c Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:05 +0000
Subject: tg3: Abort phy init for 5717 serdes devices

The 5717 serdes devices have a different phy register layout than all
other previous serdes devices.  This patch aborts the phy init sequence
in tg3_phy_reset() if the device is a 5717 serdes.  It also aborts the
tg3_phy_toggle_apd() operation.  Most other operations in the MII_SERDES
path are O.K.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4a653478edd6..7a36bf4dc968 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1560,7 +1560,9 @@ static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
 {
 	u32 reg;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+		(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+	     (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
 		return;
 
 	if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
@@ -1935,6 +1937,10 @@ static int tg3_phy_reset(struct tg3 *tp)
 		}
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+	    (tp->tg3_flags2 & TG3_FLG2_MII_SERDES))
+		return 0;
+
 	tg3_phy_apply_otp(tp);
 
 	if (tp->tg3_flags3 & TG3_FLG3_PHY_ENABLE_APD)
-- 
cgit v1.2.3


From 8b5a6c42e1f2277433aeefa9ee5a0c1a2473b7d8 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:06 +0000
Subject: tg3: Fix 5717 and 57765 memory selftests

Both the 5717 and the 57765 will fail 'ethtool -t' selftests at the
memory selftest portion.  The memory map for these two devices differs
from the rest of the asic revs and each other.  This patch adds a new
memory map to use for memory selftests.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 7a36bf4dc968..44ac9e233bef 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10659,12 +10659,27 @@ static int tg3_test_memory(struct tg3 *tp)
 		{ 0x00008000, 0x01000},
 		{ 0x00010000, 0x01000},
 		{ 0xffffffff, 0x00000}
+	}, mem_tbl_5717[] = {
+		{ 0x00000200, 0x00008},
+		{ 0x00010000, 0x0a000},
+		{ 0x00020000, 0x13c00},
+		{ 0xffffffff, 0x00000}
+	}, mem_tbl_57765[] = {
+		{ 0x00000200, 0x00008},
+		{ 0x00004000, 0x00800},
+		{ 0x00006000, 0x09800},
+		{ 0x00010000, 0x0a000},
+		{ 0xffffffff, 0x00000}
 	};
 	struct mem_entry *mem_tbl;
 	int err = 0;
 	int i;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+		mem_tbl = mem_tbl_5717;
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		mem_tbl = mem_tbl_57765;
+	else if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
 		mem_tbl = mem_tbl_5755;
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		mem_tbl = mem_tbl_5906;
-- 
cgit v1.2.3


From 5fd68fbdaf75505a2400826c7f314a1f3121a5f7 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:07 +0000
Subject: tg3: Supply a nicaddr for 57765 jumbo RCB

The 57765 needs the driver to supply a nic address to the jumbo RCB,
just like all other devices except the 5717.  This patch changes the
test to single out the 5717 rather than maintain a lengthy whitelist of
asic revs.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 44ac9e233bef..72d1e18a152c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7787,7 +7787,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
 			     (RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT) |
 			     BDINFO_FLAGS_USE_EXT_RECV);
-			if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+			if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
 				tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
 				     NIC_SRAM_RX_JUMBO_BUFFER_DESC);
 		} else {
-- 
cgit v1.2.3


From c2353a3214ff5813c4b719b3cdacbe939b1c63a0 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:08 +0000
Subject: tg3: Fix tx mailbox initialization

If a device supports MSI-X interrupts, the driver assumes TSS will be
available.  This is not true for the 57765.  This patch changes the code
so that only the default tx mailbox is initialized if TSS is not
available.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 72d1e18a152c..dffa51a4aafb 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7440,10 +7440,13 @@ static void tg3_rings_reset(struct tg3 *tp)
 		for (i = 1; i < TG3_IRQ_MAX_VECS; i++) {
 			tp->napi[i].tx_prod = 0;
 			tp->napi[i].tx_cons = 0;
-			tw32_mailbox(tp->napi[i].prodmbox, 0);
+			if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+				tw32_mailbox(tp->napi[i].prodmbox, 0);
 			tw32_rx_mbox(tp->napi[i].consmbox, 0);
 			tw32_mailbox_f(tp->napi[i].int_mbox, 1);
 		}
+		if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS))
+			tw32_mailbox(tp->napi[0].prodmbox, 0);
 	} else {
 		tp->napi[0].tx_prod = 0;
 		tp->napi[0].tx_cons = 0;
-- 
cgit v1.2.3


From cb4ed1fd8af963101a59c8c5fef97cbbf5f3fb88 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:09 +0000
Subject: tg3: Turn off the debug UART for 57765

If the debug UART is left enabled, the LEDs will not work properly.
This patch disables the debug UART.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index dffa51a4aafb..075d21a6b55a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -13328,7 +13328,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 
 	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
-- 
cgit v1.2.3


From 334355aa590c4b58750015c2f5710cd5074f45dd Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:10 +0000
Subject: tg3: Bypass power source switching for 57765

The 57765 repurposes all the GPIOs normally used to switch power sources
when configured as a NIC device.  This patch changes the code to avoid
touching the GPIOs for this asic rev.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 075d21a6b55a..78102023aa93 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2021,7 +2021,9 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 {
 	struct tg3 *tp_peer = tp;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0)
+	/* The GPIOs do something completely different on 57765. */
+	if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		return;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
-- 
cgit v1.2.3


From b0f752210c0aa5e3d9ece4cbfefdc43092a68b83 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 20 Jan 2010 16:58:11 +0000
Subject: tg3: Add 57765 phy ID and enable devices.

This patch rounds out the 57765 asic rev support by adding the 57765 phy
ID and entering the 57765 device IDs in the pci table.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 7 +++++++
 drivers/net/tg3.h | 3 ++-
 2 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 78102023aa93..eaed2aa09e1f 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -244,6 +244,12 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5717)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5718)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5724)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57781)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57785)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57761)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57765)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57791)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57795)},
 	{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
 	{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
 	{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
@@ -14199,6 +14205,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
 	case PHY_ID_BCM5761:	return "5761";
 	case PHY_ID_BCM5718C:	return "5718C";
 	case PHY_ID_BCM5718S:	return "5718S";
+	case PHY_ID_BCM57765:	return "57765";
 	case PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index edb7a14cf58f..34c9ef4b74a3 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2895,6 +2895,7 @@ struct tg3 {
 #define PHY_ID_BCM5761			0xbc050fd0
 #define PHY_ID_BCM5718C			0x5c0d8a00
 #define PHY_ID_BCM5718S			0xbc050ff0
+#define PHY_ID_BCM57765			0x5c0d8a40
 #define PHY_ID_BCM5906			0xdc00ac40
 #define PHY_ID_BCM8002			0x60010140
 #define PHY_ID_INVALID			0xffffffff
@@ -2938,7 +2939,7 @@ struct tg3 {
 	 (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
 	 (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
 	 (X) == PHY_ID_BCM5718C || (X) == PHY_ID_BCM5718S || \
-	 (X) == PHY_ID_BCM8002)
+	 (X) == PHY_ID_BCM57765 || (X) == PHY_ID_BCM8002)
 
 	struct tg3_hw_stats		*hw_stats;
 	dma_addr_t			stats_mapping;
-- 
cgit v1.2.3


From 81abb43a243b6d74b6f7201a7a22aa5355cd3a8a Mon Sep 17 00:00:00 2001
From: Liu Yu-B13201 <Yu.Liu@freescale.com>
Date: Wed, 13 Jan 2010 22:13:18 +0000
Subject: ucc_geth: update the tbi-phy setting

Old method only set tbi-phy for eth0.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 96bdc0b43889..6750de10a087 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -37,6 +37,7 @@
 #include <asm/qe.h>
 #include <asm/ucc.h>
 #include <asm/ucc_fast.h>
+#include <asm/machdep.h>
 
 #include "ucc_geth.h"
 #include "fsl_pq_mdio.h"
@@ -1334,7 +1335,7 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
 	struct ucc_geth __iomem *ug_regs;
 	struct ucc_fast __iomem *uf_regs;
 	int ret_val;
-	u32 upsmr, maccfg2, tbiBaseAddress;
+	u32 upsmr, maccfg2;
 	u16 value;
 
 	ugeth_vdbg("%s: IN", __func__);
@@ -1389,14 +1390,20 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
 	/* Note that this depends on proper setting in utbipar register. */
 	if ((ugeth->phy_interface == PHY_INTERFACE_MODE_TBI) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
-		tbiBaseAddress = in_be32(&ug_regs->utbipar);
-		tbiBaseAddress &= UTBIPAR_PHY_ADDRESS_MASK;
-		tbiBaseAddress >>= UTBIPAR_PHY_ADDRESS_SHIFT;
-		value = ugeth->phydev->bus->read(ugeth->phydev->bus,
-				(u8) tbiBaseAddress, ENET_TBI_MII_CR);
+		struct ucc_geth_info *ug_info = ugeth->ug_info;
+		struct phy_device *tbiphy;
+
+		if (!ug_info->tbi_node)
+			ugeth_warn("TBI mode requires that the device "
+				"tree specify a tbi-handle\n");
+
+		tbiphy = of_phy_find_device(ug_info->tbi_node);
+		if (!tbiphy)
+			ugeth_warn("Could not get TBI device\n");
+
+		value = phy_read(tbiphy, ENET_TBI_MII_CR);
 		value &= ~0x1000;	/* Turn off autonegotiation */
-		ugeth->phydev->bus->write(ugeth->phydev->bus,
-				(u8) tbiBaseAddress, ENET_TBI_MII_CR, value);
+		phy_write(tbiphy, ENET_TBI_MII_CR, value);
 	}
 
 	init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2);
-- 
cgit v1.2.3


From 5f8cbc13225eadd981c817f7d14b8deab61ebfaa Mon Sep 17 00:00:00 2001
From: Liu Yu-B13201 <Yu.Liu@freescale.com>
Date: Wed, 13 Jan 2010 22:13:19 +0000
Subject: phy: add RTBI mode for m88e1111

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/marvell.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 6f69b9ba0df8..65ed385c2ceb 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -63,6 +63,7 @@
 #define MII_M1111_HWCFG_MODE_COPPER_RGMII	0xb
 #define MII_M1111_HWCFG_MODE_FIBER_RGMII	0x3
 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK	0x4
+#define MII_M1111_HWCFG_MODE_COPPER_RTBI	0x9
 #define MII_M1111_HWCFG_FIBER_COPPER_AUTO	0x8000
 #define MII_M1111_HWCFG_FIBER_COPPER_RES	0x2000
 
@@ -269,6 +270,43 @@ static int m88e1111_config_init(struct phy_device *phydev)
 			return err;
 	}
 
+	if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
+		temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+		if (temp < 0)
+			return temp;
+		temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+		err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+		if (err < 0)
+			return err;
+
+		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+		if (temp < 0)
+			return temp;
+		temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+		temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+		if (err < 0)
+			return err;
+
+		/* soft reset */
+		err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+		if (err < 0)
+			return err;
+		do
+			temp = phy_read(phydev, MII_BMCR);
+		while (temp & BMCR_RESET);
+
+		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+		if (temp < 0)
+			return temp;
+		temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+		temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+		if (err < 0)
+			return err;
+	}
+
+
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
 		return err;
-- 
cgit v1.2.3


From b81124696e6a47d5db02b2b3561d66d1392b0f2f Mon Sep 17 00:00:00 2001
From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Date: Wed, 20 Jan 2010 12:41:13 -0800
Subject: wimax/i2400m: Add support for more i6x50 SKUs

The Intel WiMax Wireless Link 6050 can show under more than one USB
ID. Add support for all, introducing a generic flag (i2400mu->i6050)
that denotes a 6x50 based device.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
---
 drivers/net/wimax/i2400m/i2400m-usb.h |  2 ++
 drivers/net/wimax/i2400m/usb.c        | 12 +++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 5cc0f279417e..2d7c96d7e865 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -151,6 +151,7 @@ enum {
 
 	/* Device IDs */
 	USB_DEVICE_ID_I6050 = 0x0186,
+	USB_DEVICE_ID_I6050_2 = 0x0188,
 };
 
 
@@ -234,6 +235,7 @@ struct i2400mu {
 	u8 rx_size_auto_shrink;
 
 	struct dentry *debugfs_dentry;
+	unsigned i6050:1;	/* 1 if this is a 6050 based SKU */
 };
 
 
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 3b48681f8a0d..98f4f8c5fb68 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -478,7 +478,16 @@ int i2400mu_probe(struct usb_interface *iface,
 	i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
 	i2400m->bus_bm_mac_addr_impaired = 0;
 
-	if (id->idProduct == USB_DEVICE_ID_I6050) {
+	switch (id->idProduct) {
+	case USB_DEVICE_ID_I6050:
+	case USB_DEVICE_ID_I6050_2:
+		i2400mu->i6050 = 1;
+		break;
+	default:
+		break;
+	}
+
+	if (i2400mu->i6050) {
 		i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
 		i2400mu->endpoint_cfg.bulk_out = 0;
 		i2400mu->endpoint_cfg.notification = 3;
@@ -719,6 +728,7 @@ int i2400mu_post_reset(struct usb_interface *iface)
 static
 struct usb_device_id i2400mu_id_table[] = {
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
+	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
 	{ USB_DEVICE(0x8086, 0x0181) },
 	{ USB_DEVICE(0x8086, 0x1403) },
 	{ USB_DEVICE(0x8086, 0x1405) },
-- 
cgit v1.2.3


From 8f47afe080df450eedda7b29873512c2a9a9adcb Mon Sep 17 00:00:00 2001
From: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Date: Tue, 19 Jan 2010 05:15:00 +0000
Subject: be2net: ethtool self test reorganization.

The ddr dma ethtool self test needs to be performed even when ETH_TEST_FL_OFFLINE is not set.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_ethtool.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index f18c02f3a5e4..2f2ebbd678f2 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -545,10 +545,11 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 						&data[2]) != 0) {
 			test->flags |= ETH_TEST_FL_FAILED;
 		}
+	}
 
-		data[3] = be_test_ddr_dma(adapter);
-		if (data[3] != 0)
-			test->flags |= ETH_TEST_FL_FAILED;
+	if (be_test_ddr_dma(adapter) != 0) {
+		data[3] = 1;
+		test->flags |= ETH_TEST_FL_FAILED;
 	}
 
 }
-- 
cgit v1.2.3


From 4276e47e2d1c85a2477caf0d22b91c4f2377fba8 Mon Sep 17 00:00:00 2001
From: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Date: Tue, 19 Jan 2010 05:15:36 +0000
Subject: be2net: Add link test to list of ethtool self tests.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_ethtool.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 2f2ebbd678f2..09d8899b2de9 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -112,6 +112,7 @@ static const char et_self_tests[][ETH_GSTRING_LEN] = {
 	"PHY Loopback test",
 	"External Loopback test",
 	"DDR DMA test"
+	"Link test"
 };
 
 #define ETHTOOL_TESTS_NUM ARRAY_SIZE(et_self_tests)
@@ -529,6 +530,9 @@ static void
 be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
+	bool link_up;
+	u8 mac_speed = 0;
+	u16 qos_link_speed = 0;
 
 	memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
 
@@ -552,6 +556,13 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 		test->flags |= ETH_TEST_FL_FAILED;
 	}
 
+	if (be_cmd_link_status_query(adapter, &link_up, &mac_speed,
+				&qos_link_speed) != 0) {
+		test->flags |= ETH_TEST_FL_FAILED;
+		data[4] = -1;
+	} else if (mac_speed) {
+		data[4] = 1;
+	}
 }
 
 static int
-- 
cgit v1.2.3


From 26d92f9276a56d55511a427fb70bd70886af647a Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Thu, 21 Jan 2010 22:52:08 -0800
Subject: be2net: fix bug in rx page posting

Pages are posted to the rxq in such a way that more than one frag
can share the page. The last frag that uses the page unmaps the
page.  In the case when a page is not fully used (due to lack of space in rxq)
the last frag that uses the page is not being set as a "last_page_user";
instead, the next frag in the rxq is incorrectly being set.

The fix has also been tested on ppc64 with 64k pages...

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 3a1f7902c16d..33ab8c7f14fe 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -910,7 +910,7 @@ static inline struct page *be_alloc_pages(u32 size)
 static void be_post_rx_frags(struct be_adapter *adapter)
 {
 	struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
-	struct be_rx_page_info *page_info = NULL;
+	struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL;
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	struct page *pagep = NULL;
 	struct be_eth_rx_d *rxd;
@@ -941,7 +941,6 @@ static void be_post_rx_frags(struct be_adapter *adapter)
 		rxd = queue_head_node(rxq);
 		rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
 		rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
-		queue_head_inc(rxq);
 
 		/* Any space left in the current big page for another frag? */
 		if ((page_offset + rx_frag_size + rx_frag_size) >
@@ -949,10 +948,13 @@ static void be_post_rx_frags(struct be_adapter *adapter)
 			pagep = NULL;
 			page_info->last_page_user = true;
 		}
+
+		prev_page_info = page_info;
+		queue_head_inc(rxq);
 		page_info = &page_info_tbl[rxq->head];
 	}
 	if (pagep)
-		page_info->last_page_user = true;
+		prev_page_info->last_page_user = true;
 
 	if (posted) {
 		atomic_add(posted, &rxq->used);
-- 
cgit v1.2.3


From b3fbdcf49f940d0703c356441e0daf045e64e076 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 21 Jan 2010 11:40:47 +0100
Subject: mac80211: pass vif and station to update_tkip_key

When a TKIP key is updated, we should pass the station
pointer instead of just the address, since drivers can
use that to store their own data. We also need to pass
the virtual interface pointer.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c        | 11 ++++++++---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +++++++---
 include/net/mac80211.h                 |  6 ++++--
 net/mac80211/driver-ops.h              | 14 ++++++++++----
 net/mac80211/driver-trace.h            | 15 +++++++++------
 net/mac80211/tkip.c                    | 12 +++++-------
 6 files changed, 43 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index c238468bca7f..c699e46534dc 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -844,8 +844,10 @@ static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
 }
 
 static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
-			struct ieee80211_key_conf *keyconf, const u8 *addr,
-			u32 iv32, u16 *phase1key)
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_key_conf *keyconf,
+				   struct ieee80211_sta *sta,
+				   u32 iv32, u16 *phase1key)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
@@ -863,7 +865,10 @@ static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
 	keymac_write(dev, index, NULL);	/* First zero out mac to avoid race */
 
 	rx_tkip_phase1_write(dev, index, iv32, phase1key);
-	keymac_write(dev, index, addr);
+	/* only pairwise TKIP keys are supported right now */
+	if (WARN_ON(!sta))
+		goto out_unlock;
+	keymac_write(dev, index, sta->addr);
 
 out_unlock:
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 8db86239bd6a..62b6939df52e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2839,14 +2839,18 @@ void iwl_config_ap(struct iwl_priv *priv)
 }
 
 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
-			struct ieee80211_key_conf *keyconf, const u8 *addr,
-			u32 iv32, u16 *phase1key)
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_key_conf *keyconf,
+				    struct ieee80211_sta *sta,
+				    u32 iv32, u16 *phase1key)
 {
 
 	struct iwl_priv *priv = hw->priv;
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
-	iwl_update_tkip_key(priv, keyconf, addr, iv32, phase1key);
+	iwl_update_tkip_key(priv, keyconf,
+			    sta ? sta->addr : iwl_bcast_addr,
+			    iv32, phase1key);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f03f97b627fe..f56d6f479532 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1614,8 +1614,10 @@ struct ieee80211_ops {
 		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 		       struct ieee80211_key_conf *key);
 	void (*update_tkip_key)(struct ieee80211_hw *hw,
-			struct ieee80211_key_conf *conf, const u8 *address,
-			u32 iv32, u16 *phase1key);
+				struct ieee80211_vif *vif,
+				struct ieee80211_key_conf *conf,
+				struct ieee80211_sta *sta,
+				u32 iv32, u16 *phase1key);
 	int (*hw_scan)(struct ieee80211_hw *hw,
 		       struct cfg80211_scan_request *req);
 	void (*sw_scan_start)(struct ieee80211_hw *hw);
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index de91d39e0276..40c6e9a89864 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -137,16 +137,22 @@ static inline int drv_set_key(struct ieee80211_local *local,
 }
 
 static inline void drv_update_tkip_key(struct ieee80211_local *local,
+				       struct ieee80211_sub_if_data *sdata,
 				       struct ieee80211_key_conf *conf,
-				       const u8 *address, u32 iv32,
+				       struct sta_info *sta, u32 iv32,
 				       u16 *phase1key)
 {
+	struct ieee80211_sta *ista = NULL;
+
 	might_sleep();
 
+	if (sta)
+		ista = &sta->sta;
+
 	if (local->ops->update_tkip_key)
-		local->ops->update_tkip_key(&local->hw, conf, address,
-					    iv32, phase1key);
-	trace_drv_update_tkip_key(local, conf, address, iv32);
+		local->ops->update_tkip_key(&local->hw, &sdata->vif, conf,
+					    ista, iv32, phase1key);
+	trace_drv_update_tkip_key(local, sdata, conf, ista, iv32);
 }
 
 static inline int drv_hw_scan(struct ieee80211_local *local,
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 0ea258123b8e..fefa6e6b01bc 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -331,26 +331,29 @@ TRACE_EVENT(drv_set_key,
 
 TRACE_EVENT(drv_update_tkip_key,
 	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
 		 struct ieee80211_key_conf *conf,
-		 const u8 *address, u32 iv32),
+		 struct ieee80211_sta *sta, u32 iv32),
 
-	TP_ARGS(local, conf, address, iv32),
+	TP_ARGS(local, sdata, conf, sta, iv32),
 
 	TP_STRUCT__entry(
 		LOCAL_ENTRY
-		__array(u8, addr, 6)
+		VIF_ENTRY
+		STA_ENTRY
 		__field(u32, iv32)
 	),
 
 	TP_fast_assign(
 		LOCAL_ASSIGN;
-		memcpy(__entry->addr, address, 6);
+		VIF_ASSIGN;
+		STA_ASSIGN;
 		__entry->iv32 = iv32;
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT " addr:%pM iv32:%#x",
-		LOCAL_PR_ARG, __entry->addr, __entry->iv32
+		LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " iv32:%#x",
+		LOCAL_PR_ARG,VIF_PR_ARG,STA_PR_ARG, __entry->iv32
 	)
 );
 
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 14fe49332c02..7ef491e9d66d 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -304,14 +304,12 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm,
 	if (key->local->ops->update_tkip_key &&
 	    key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
 	    key->u.tkip.rx[queue].state != TKIP_STATE_PHASE1_HW_UPLOADED) {
-		static const u8 bcast[ETH_ALEN] =
-		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-		const u8 *sta_addr = key->sta->sta.addr;
+		struct ieee80211_sub_if_data *sdata = key->sdata;
 
-		if (is_multicast_ether_addr(ra))
-			sta_addr = bcast;
-
-		drv_update_tkip_key(key->local, &key->conf, sta_addr,
+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			sdata = container_of(key->sdata->bss,
+					struct ieee80211_sub_if_data, u.ap);
+		drv_update_tkip_key(key->local, sdata, &key->conf, key->sta,
 				iv32, key->u.tkip.rx[queue].p1k);
 		key->u.tkip.rx[queue].state = TKIP_STATE_PHASE1_HW_UPLOADED;
 	}
-- 
cgit v1.2.3


From ef15aac6073b27fd4f70007784d2d52ed394bf43 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 20 Jan 2010 12:02:33 +0100
Subject: cfg80211: export multiple MAC addresses in sysfs

If a device has multiple MAC addresses, userspace will
need to know about that. Similarly, if it allows the
MAC addresses to vary by a bitmask.

If a driver exports multiple addresses, it is assumed
that it will be able to deal with that many different
addresses, which need not necessarily match the ones
programmed into the device; if a mask is set then the
device should deal addresses within that mask based
on an arbitrary "base address".

To test it all and show how it is used, add support
to hwsim even though it can't actually deal with
addresses different from the default.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c |  8 +++++++-
 include/net/cfg80211.h                | 22 +++++++++++++++++++++-
 net/wireless/core.c                   | 12 ++++++++++++
 net/wireless/sysfs.c                  | 20 ++++++++++++++++++++
 4 files changed, 60 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 84df3fcf37b3..0dbda8dfbd99 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -281,6 +281,8 @@ struct mac80211_hwsim_data {
 	struct ieee80211_channel channels_5ghz[ARRAY_SIZE(hwsim_channels_5ghz)];
 	struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)];
 
+	struct mac_address addresses[2];
+
 	struct ieee80211_channel *channel;
 	unsigned long beacon_int; /* in jiffies unit */
 	unsigned int rx_filter;
@@ -1154,7 +1156,11 @@ static int __init init_mac80211_hwsim(void)
 		SET_IEEE80211_DEV(hw, data->dev);
 		addr[3] = i >> 8;
 		addr[4] = i;
-		SET_IEEE80211_PERM_ADDR(hw, addr);
+		memcpy(data->addresses[0].addr, addr, ETH_ALEN);
+		memcpy(data->addresses[1].addr, addr, ETH_ALEN);
+		data->addresses[1].addr[0] |= 0x40;
+		hw->wiphy->n_addresses = 2;
+		hw->wiphy->addresses = data->addresses;
 
 		hw->channel_change_time = 1;
 		hw->queues = 4;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2af52704e670..c5d16f299d6f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1195,6 +1195,10 @@ enum wiphy_flags {
 	WIPHY_FLAG_4ADDR_STATION	= BIT(6),
 };
 
+struct mac_address {
+	u8 addr[ETH_ALEN];
+};
+
 /**
  * struct wiphy - wireless hardware description
  * @idx: the wiphy index assigned to this item
@@ -1213,12 +1217,28 @@ enum wiphy_flags {
  *	-1 = fragmentation disabled, only odd values >= 256 used
  * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
  * @net: the network namespace this wiphy currently lives in
+ * @perm_addr: permanent MAC address of this device
+ * @addr_mask: If the device supports multiple MAC addresses by masking,
+ *	set this to a mask with variable bits set to 1, e.g. if the last
+ *	four bits are variable then set it to 00:...:00:0f. The actual
+ *	variable bits shall be determined by the interfaces added, with
+ *	interfaces not matching the mask being rejected to be brought up.
+ * @n_addresses: number of addresses in @addresses.
+ * @addresses: If the device has more than one address, set this pointer
+ *	to a list of addresses (6 bytes each). The first one will be used
+ *	by default for perm_addr. In this case, the mask should be set to
+ *	all-zeroes. In this case it is assumed that the device can handle
+ *	the same number of arbitrary MAC addresses.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
 
-	/* permanent MAC address */
+	/* permanent MAC address(es) */
 	u8 perm_addr[ETH_ALEN];
+	u8 addr_mask[ETH_ALEN];
+
+	u16 n_addresses;
+	struct mac_address *addresses;
 
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index d07f57c906db..71b6b3a9cf1f 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -413,6 +413,18 @@ int wiphy_register(struct wiphy *wiphy)
 	int i;
 	u16 ifmodes = wiphy->interface_modes;
 
+	if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
+		return -EINVAL;
+
+	if (WARN_ON(wiphy->addresses &&
+		    !is_zero_ether_addr(wiphy->perm_addr) &&
+		    memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
+			   ETH_ALEN)))
+		return -EINVAL;
+
+	if (wiphy->addresses)
+		memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
+
 	/* sanity check ifmodes */
 	WARN_ON(!ifmodes);
 	ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index efe3c5c92b2d..9f2cef3e0ca0 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -33,10 +33,30 @@ static ssize_t name ## _show(struct device *dev,			\
 
 SHOW_FMT(index, "%d", wiphy_idx);
 SHOW_FMT(macaddress, "%pM", wiphy.perm_addr);
+SHOW_FMT(address_mask, "%pM", wiphy.addr_mask);
+
+static ssize_t addresses_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct wiphy *wiphy = &dev_to_rdev(dev)->wiphy;
+	char *start = buf;
+	int i;
+
+	if (!wiphy->addresses)
+		return sprintf(buf, "%pM\n", wiphy->perm_addr);
+
+	for (i = 0; i < wiphy->n_addresses; i++)
+		buf += sprintf(buf, "%pM\n", &wiphy->addresses[i].addr);
+
+	return buf - start;
+}
 
 static struct device_attribute ieee80211_dev_attrs[] = {
 	__ATTR_RO(index),
 	__ATTR_RO(macaddress),
+	__ATTR_RO(address_mask),
+	__ATTR_RO(addresses),
 	{}
 };
 
-- 
cgit v1.2.3


From 5d6ce628f986d1a3c523cbb0a5a52095c48cc332 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Wed, 20 Jan 2010 23:51:03 -0500
Subject: ath5k: dont use external sleep clock in AP mode

When using the external sleep clock in AP mode, the
TSF increments too quickly, causing beacon interval
to be much lower than it is supposed to be, resulting
in lots of beacon-not-ready interrupts.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14802.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/reset.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 6690923fd78c..a35a7db0fc4c 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1374,8 +1374,9 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	 * Set clocks to 32KHz operation and use an
 	 * external 32KHz crystal when sleeping if one
 	 * exists */
-	if (ah->ah_version == AR5K_AR5212)
-			ath5k_hw_set_sleep_clock(ah, true);
+	if (ah->ah_version == AR5K_AR5212 &&
+	    ah->ah_op_mode != NL80211_IFTYPE_AP)
+		ath5k_hw_set_sleep_clock(ah, true);
 
 	/*
 	 * Disable beacons and reset the register
-- 
cgit v1.2.3


From a951ae2176b982574ffa197455db6c89359fd5eb Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Wed, 20 Jan 2010 23:51:04 -0500
Subject: ath5k: fix setup for CAB queue

The beacon sent gating doesn't seem to work with any combination
of flags.  Thus, buffered frames tend to stay buffered forever,
using up tx descriptors.

Instead, use the DBA gating and hold transmission of the buffered
frames until 80% of the beacon interval has elapsed using the ready
time.  This fixes the following error in AP mode:

   ath5k phy0: no further txbuf available, dropping packet

Add a comment to acknowledge that this isn't the best solution.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/ath5k.h |  2 +-
 drivers/net/wireless/ath/ath5k/base.c  | 22 +++++++++++++++++++---
 drivers/net/wireless/ath/ath5k/qcu.c   |  5 +++--
 3 files changed, 23 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 66bcb506a112..ad4d446f0264 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -535,7 +535,7 @@ struct ath5k_txq_info {
 	u32	tqi_cbr_period; /* Constant bit rate period */
 	u32	tqi_cbr_overflow_limit;
 	u32	tqi_burst_time;
-	u32	tqi_ready_time; /* Not used */
+	u32	tqi_ready_time; /* Time queue waits after an event */
 };
 
 /*
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index b5015376d4ba..535a6afb94e3 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1516,7 +1516,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
 
 	ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
 	if (ret)
-		return ret;
+		goto err;
+
 	if (sc->opmode == NL80211_IFTYPE_AP ||
 		sc->opmode == NL80211_IFTYPE_MESH_POINT) {
 		/*
@@ -1543,10 +1544,25 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
 	if (ret) {
 		ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
 			"hardware queue!\n", __func__);
-		return ret;
+		goto err;
 	}
+	ret = ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */
+	if (ret)
+		goto err;
 
-	return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
+	/* reconfigure cabq with ready time to 80% of beacon_interval */
+	ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
+	if (ret)
+		goto err;
+
+	qi.tqi_ready_time = (sc->bintval * 80) / 100;
+	ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
+	if (ret)
+		goto err;
+
+	ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
+err:
+	return ret;
 }
 
 static void
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index abe36c0d139c..9122a8556f45 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -408,12 +408,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			break;
 
 		case AR5K_TX_QUEUE_CAB:
+			/* XXX: use BCN_SENT_GT, if we can figure out how */
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_BCN_SENT_GT |
+				AR5K_QCU_MISC_FRSHED_DBA_GT |
 				AR5K_QCU_MISC_CBREXP_DIS |
 				AR5K_QCU_MISC_CBREXP_BCN_DIS);
 
-			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+			ath5k_hw_reg_write(ah, ((tq->tqi_ready_time -
 				(AR5K_TUNE_SW_BEACON_RESP -
 				AR5K_TUNE_DMA_BEACON_RESP) -
 				AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
-- 
cgit v1.2.3


From 58da1318ee92ad3fe7917278d596768bbe441850 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Date: Thu, 21 Jan 2010 11:17:27 +0530
Subject: ath9k: Fix wifi disconnection when collocated bt scan is active

As all bt packets are priority traffic during bt scan, wifi
will get disconnected when bt scan lasts for few seconds. Fix
this by allocating 10% of bt period time (4.5ms) to wifi fully.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h  |  2 ++
 drivers/net/wireless/ath/ath9k/btcoex.h |  2 ++
 drivers/net/wireless/ath/ath9k/gpio.c   | 30 ++++++++++++++++++++++--------
 drivers/net/wireless/ath/ath9k/reg.h    |  6 +++---
 4 files changed, 29 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bf3d4c4bfa52..bdbcc70df075 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -364,6 +364,7 @@ struct ath_btcoex {
 	int bt_stomp_type; /* Types of BT stomping */
 	u32 btcoex_no_stomp; /* in usec */
 	u32 btcoex_period; /* in usec */
+	u32 btscan_no_stomp; /* in usec */
 	struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
 };
 
@@ -429,6 +430,7 @@ void ath_deinit_leds(struct ath_softc *sc);
 #define SC_OP_SCANNING               BIT(10)
 #define SC_OP_TSF_RESET              BIT(11)
 #define SC_OP_BT_PRIORITY_DETECTED   BIT(12)
+#define SC_OP_BT_SCAN		     BIT(13)
 
 /* Powersave flags */
 #define PS_WAIT_FOR_BEACON        BIT(0)
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 1ba31a73317c..1ee5a15ccbb1 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -25,10 +25,12 @@
 
 #define ATH_BTCOEX_DEF_BT_PERIOD  45
 #define ATH_BTCOEX_DEF_DUTY_CYCLE 55
+#define ATH_BTCOEX_BTSCAN_DUTY_CYCLE 90
 #define ATH_BTCOEX_BMISS_THRESH   50
 
 #define ATH_BT_PRIORITY_TIME_THRESHOLD 1000 /* ms */
 #define ATH_BT_CNT_THRESHOLD	       3
+#define ATH_BT_CNT_SCAN_THRESHOLD      15
 
 enum ath_btcoex_scheme {
 	ATH_BTCOEX_CFG_NONE,
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index e204bd25ff65..deab8beb0680 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -230,12 +230,17 @@ static void ath_detect_bt_priority(struct ath_softc *sc)
 
 	if (time_after(jiffies, btcoex->bt_priority_time +
 			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
-		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
+		sc->sc_flags &= ~(SC_OP_BT_PRIORITY_DETECTED | SC_OP_BT_SCAN);
+		/* Detect if colocated bt started scanning */
+		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_SCAN_THRESHOLD) {
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
+				  "BT scan detected");
+			sc->sc_flags |= (SC_OP_BT_SCAN |
+					 SC_OP_BT_PRIORITY_DETECTED);
+		} else if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
 			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
 				  "BT priority traffic detected");
 			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
-		} else {
-			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
 		}
 
 		btcoex->bt_priority_cnt = 0;
@@ -316,12 +321,17 @@ static void ath_btcoex_period_timer(unsigned long data)
 	struct ath_softc *sc = (struct ath_softc *) data;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_btcoex *btcoex = &sc->btcoex;
+	u32 timer_period;
+	bool is_btscan;
 
 	ath_detect_bt_priority(sc);
 
+	is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
+
 	spin_lock_bh(&btcoex->btcoex_lock);
 
-	ath9k_btcoex_bt_stomp(sc, btcoex->bt_stomp_type);
+	ath9k_btcoex_bt_stomp(sc, is_btscan ? ATH_BTCOEX_STOMP_ALL :
+			      btcoex->bt_stomp_type);
 
 	spin_unlock_bh(&btcoex->btcoex_lock);
 
@@ -329,11 +339,12 @@ static void ath_btcoex_period_timer(unsigned long data)
 		if (btcoex->hw_timer_enabled)
 			ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
 
+		timer_period = is_btscan ? btcoex->btscan_no_stomp :
+					   btcoex->btcoex_no_stomp;
 		ath9k_gen_timer_start(ah,
 				      btcoex->no_stomp_timer,
 				      (ath9k_hw_gettsf32(ah) +
-				       btcoex->btcoex_no_stomp),
-				       btcoex->btcoex_no_stomp * 10);
+				       timer_period), timer_period * 10);
 		btcoex->hw_timer_enabled = true;
 	}
 
@@ -350,13 +361,14 @@ static void ath_btcoex_no_stomp_timer(void *arg)
 	struct ath_softc *sc = (struct ath_softc *)arg;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_btcoex *btcoex = &sc->btcoex;
+	bool is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
 
 	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
 		  "no stomp timer running \n");
 
 	spin_lock_bh(&btcoex->btcoex_lock);
 
-	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
+	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
 		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_NONE);
 	 else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
 		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_LOW);
@@ -371,6 +383,8 @@ int ath_init_btcoex_timer(struct ath_softc *sc)
 	btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
 	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
 		btcoex->btcoex_period / 100;
+	btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) *
+				   btcoex->btcoex_period / 100;
 
 	setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
 			(unsigned long) sc);
@@ -405,7 +419,7 @@ void ath9k_btcoex_timer_resume(struct ath_softc *sc)
 
 	btcoex->bt_priority_cnt = 0;
 	btcoex->bt_priority_time = jiffies;
-	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+	sc->sc_flags &= ~(SC_OP_BT_PRIORITY_DETECTED | SC_OP_BT_SCAN);
 
 	mod_timer(&btcoex->period_timer, jiffies);
 }
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 8e653fb937a1..72cfa8ebd9ae 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1547,9 +1547,9 @@ enum {
 
 #define AR_BT_COEX_WEIGHT          0x8174
 #define AR_BT_COEX_WGHT		   0xff55
-#define AR_STOMP_ALL_WLAN_WGHT	   0xffcc
-#define AR_STOMP_LOW_WLAN_WGHT	   0xaaa8
-#define AR_STOMP_NONE_WLAN_WGHT	   0xaa00
+#define AR_STOMP_ALL_WLAN_WGHT	   0xfcfc
+#define AR_STOMP_LOW_WLAN_WGHT	   0xa8a8
+#define AR_STOMP_NONE_WLAN_WGHT	   0x0000
 #define AR_BTCOEX_BT_WGHT          0x0000ffff
 #define AR_BTCOEX_BT_WGHT_S        0
 #define AR_BTCOEX_WL_WGHT          0xffff0000
-- 
cgit v1.2.3


From aa4c7b2a2547db95388f795f092ea286fbdd98a1 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 22 Jan 2010 01:53:12 +0100
Subject: b43: check band width
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       | 6 ++++++
 drivers/net/wireless/b43/phy_common.h | 3 +++
 drivers/net/wireless/b43/phy_n.c      | 2 +-
 3 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index c699e46534dc..6d7cf3c2f7bf 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3576,6 +3576,12 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	dev = wl->current_dev;
 	phy = &dev->phy;
 
+	if (conf_is_ht(conf))
+		phy->is_40mhz =
+			(conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf));
+	else
+		phy->is_40mhz = false;
+
 	b43_mac_suspend(dev);
 
 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 9edd4e8e0c85..f635f9e4f83d 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -212,6 +212,9 @@ struct b43_phy {
 	bool supports_2ghz;
 	bool supports_5ghz;
 
+	/* HT info */
+	bool is_40mhz;
+
 	/* GMODE bit enabled? */
 	bool gmode;
 
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index e77f1f24d101..2cdf32e5fd9b 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1787,7 +1787,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 
 	b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AA9);
 
-	if (1 /* FIXME: the band width is 20 MHz */)
+	if (!dev->phy.is_40mhz)
 		freq = 2500;
 	else
 		freq = 5000;
-- 
cgit v1.2.3


From 75377b2476d85d90c0db07e780ee95741cff3a2d Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 22 Jan 2010 01:53:13 +0100
Subject: b43: N-PHY: implement overriding RF control
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       | 82 ++++++++++++++++++++++++++++++++--
 drivers/net/wireless/b43/tables_nphy.c | 37 +++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h | 21 +++++++++
 3 files changed, 137 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 2cdf32e5fd9b..d3c9783b76ba 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -912,6 +912,82 @@ ok:
 	b43_phy_write(dev, B43_NPHY_RFSEQMODE, seq_mode);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlOverride */
+static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
+						u16 value, u8 core, bool off)
+{
+	int i;
+	u8 index = fls(field);
+	u8 addr, en_addr, val_addr;
+	/* we expect only one bit set */
+	B43_WARN_ON(field & (~(1 << index)));
+
+	if (dev->phy.rev >= 3) {
+		const struct nphy_rf_control_override_rev3 *rf_ctrl;
+		for (i = 0; i < 2; i++) {
+			if (index == 0 || index == 16) {
+				b43err(dev->wl,
+					"Unsupported RF Ctrl Override call\n");
+				return;
+			}
+
+			rf_ctrl = &tbl_rf_control_override_rev3[index - 1];
+			en_addr = B43_PHY_N((i == 0) ?
+				rf_ctrl->en_addr0 : rf_ctrl->en_addr1);
+			val_addr = B43_PHY_N((i == 0) ?
+				rf_ctrl->val_addr0 : rf_ctrl->val_addr1);
+
+			if (off) {
+				b43_phy_mask(dev, en_addr, ~(field));
+				b43_phy_mask(dev, val_addr,
+						~(rf_ctrl->val_mask));
+			} else {
+				if (core == 0 || ((1 << core) & i) != 0) {
+					b43_phy_set(dev, en_addr, field);
+					b43_phy_maskset(dev, val_addr,
+						~(rf_ctrl->val_mask),
+						(value << rf_ctrl->val_shift));
+				}
+			}
+		}
+	} else {
+		const struct nphy_rf_control_override_rev2 *rf_ctrl;
+		if (off) {
+			b43_phy_mask(dev, B43_NPHY_RFCTL_OVER, ~(field));
+			value = 0;
+		} else {
+			b43_phy_set(dev, B43_NPHY_RFCTL_OVER, field);
+		}
+
+		for (i = 0; i < 2; i++) {
+			if (index <= 1 || index == 16) {
+				b43err(dev->wl,
+					"Unsupported RF Ctrl Override call\n");
+				return;
+			}
+
+			if (index == 2 || index == 10 ||
+			    (index >= 13 && index <= 15)) {
+				core = 1;
+			}
+
+			rf_ctrl = &tbl_rf_control_override_rev2[index - 2];
+			addr = B43_PHY_N((i == 0) ?
+				rf_ctrl->addr0 : rf_ctrl->addr1);
+
+			if ((core & (1 << i)) != 0)
+				b43_phy_maskset(dev, addr, ~(rf_ctrl->bmask),
+						(value << rf_ctrl->shift));
+
+			b43_phy_set(dev, B43_NPHY_RFCTL_OVER, 0x1);
+			b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
+					B43_NPHY_RFCTL_CMD_START);
+			udelay(1);
+			b43_phy_mask(dev, B43_NPHY_RFCTL_OVER, 0xFFFE);
+		}
+	}
+}
+
 static void b43_nphy_bphy_init(struct b43_wldev *dev)
 {
 	unsigned int i;
@@ -2075,8 +2151,8 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 
 			tmp[0] = ((cur_hpf2 << 8) | (cur_hpf1 << 4) |
 					(cur_lna << 2));
-			/* TODO:Call N PHY RF Ctrl Override with 0x400, tmp[0],
-				3, 0 as arguments */
+			b43_nphy_rf_control_override(dev, 0x400, tmp[0], 3,
+									false);
 			b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
 			b43_nphy_stop_playback(dev);
 
@@ -2124,7 +2200,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 			break;
 	}
 
-	/* TODO: Call N PHY RF Ctrl Override with 0x400, 0, 3, 1 as arguments*/
+	b43_nphy_rf_control_override(dev, 0x400, 0, 3, true);
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
 	b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x110), 2, gain_save);
 
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index b8c9fc619ab1..dd9687d611d7 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2883,6 +2883,43 @@ const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
 	0x9084, 0x9267, 0x9056, 0x9234
 };
 
+/* addr0,  addr1,  bmask,  shift */
+const struct nphy_rf_control_override_rev2 tbl_rf_control_override_rev2[] = {
+	{ 0x78, 0x78, 0x0038,  3 }, /* for field == 0x0002 (fls == 2) */
+	{ 0x7A, 0x7D, 0x0001,  0 }, /* for field == 0x0004 (fls == 3) */
+	{ 0x7A, 0x7D, 0x0002,  1 }, /* for field == 0x0008 (fls == 4) */
+	{ 0x7A, 0x7D, 0x0004,  2 }, /* for field == 0x0010 (fls == 5) */
+	{ 0x7A, 0x7D, 0x0030,  4 }, /* for field == 0x0020 (fls == 6) */
+	{ 0x7A, 0x7D, 0x00C0,  6 }, /* for field == 0x0040 (fls == 7) */
+	{ 0x7A, 0x7D, 0x0100,  8 }, /* for field == 0x0080 (fls == 8) */
+	{ 0x7A, 0x7D, 0x0200,  9 }, /* for field == 0x0100 (fls == 9) */
+	{ 0x78, 0x78, 0x0004,  2 }, /* for field == 0x0200 (fls == 10) */
+	{ 0x7B, 0x7E, 0x01FF,  0 }, /* for field == 0x0400 (fls == 11) */
+	{ 0x7C, 0x7F, 0x01FF,  0 }, /* for field == 0x0800 (fls == 12) */
+	{ 0x78, 0x78, 0x0100,  8 }, /* for field == 0x1000 (fls == 13) */
+	{ 0x78, 0x78, 0x0200,  9 }, /* for field == 0x2000 (fls == 14) */
+	{ 0x78, 0x78, 0xF000, 12 }  /* for field == 0x4000 (fls == 15) */
+};
+
+/* val_mask, val_shift, en_addr0, val_addr0, en_addr1, val_addr1 */
+const struct nphy_rf_control_override_rev3 tbl_rf_control_override_rev3[] = {
+	{ 0x8000, 15, 0xE5, 0xF9, 0xE6, 0xFB }, /* field == 0x0001 (fls 1) */
+	{ 0x0001,  0, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0002 (fls 2) */
+	{ 0x0002,  1, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0004 (fls 3) */
+	{ 0x0004,  2, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0008 (fls 4) */
+	{ 0x0016,  4, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0010 (fls 5) */
+	{ 0x0020,  5, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0020 (fls 6) */
+	{ 0x0040,  6, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0040 (fls 7) */
+	{ 0x0080,  6, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0080 (fls 8) */
+	{ 0x0100,  7, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0100 (fls 9) */
+	{ 0x0007,  0, 0xE7, 0xF8, 0xEC, 0xFA }, /* field == 0x0200 (fls 10) */
+	{ 0x0070,  4, 0xE7, 0xF8, 0xEC, 0xFA }, /* field == 0x0400 (fls 11) */
+	{ 0xE000, 13, 0xE7, 0x7A, 0xEC, 0x7D }, /* field == 0x0800 (fls 12) */
+	{ 0xFFFF,  0, 0xE7, 0x7B, 0xEC, 0x7E }, /* field == 0x1000 (fls 13) */
+	{ 0xFFFF,  0, 0xE7, 0x7C, 0xEC, 0x7F }, /* field == 0x2000 (fls 14) */
+	{ 0x00C0,  6, 0xE7, 0xF9, 0xEC, 0xFB }  /* field == 0x4000 (fls 15) */
+};
+
 static inline void assert_ntab_array_sizes(void)
 {
 #undef check
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 6bbef894010c..5d38172a152d 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -51,6 +51,22 @@ struct nphy_txiqcal_ladder {
 	u8 g_env;
 };
 
+struct nphy_rf_control_override_rev2 {
+	u8 addr0;
+	u8 addr1;
+	u16 bmask;
+	u8 shift;
+};
+
+struct nphy_rf_control_override_rev3 {
+	u16 val_mask;
+	u8 val_shift;
+	u8 en_addr0;
+	u8 val_addr0;
+	u8 en_addr1;
+	u8 val_addr1;
+};
+
 /* Upload the default register value table.
  * If "ghz5" is true, we upload the 5Ghz table. Otherwise the 2.4Ghz
  * table is uploaded. If "ignore_uploadflag" is true, we upload any value
@@ -178,4 +194,9 @@ extern const u16 tbl_tx_iqlo_cal_cmds_recal[];
 extern const u16 tbl_tx_iqlo_cal_cmds_fullcal[];
 extern const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[];
 
+extern const struct nphy_rf_control_override_rev2
+	tbl_rf_control_override_rev2[];
+extern const struct nphy_rf_control_override_rev3
+	tbl_rf_control_override_rev3[];
+
 #endif /* B43_TABLES_NPHY_H_ */
-- 
cgit v1.2.3


From 10a798733e0f47923a1050231d8d39609c62be70 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 22 Jan 2010 01:53:14 +0100
Subject: b43: N-PHY: add running samples
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 68 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d3c9783b76ba..f5900f04ff5c 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -816,6 +816,66 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RunSamples */
+static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
+					u16 wait, bool iqmode, bool dac_test)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	int i;
+	u16 seq_mode;
+	u32 tmp;
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, true);
+
+	if ((nphy->bb_mult_save & 0x80000000) == 0) {
+		tmp = b43_ntab_read(dev, B43_NTAB16(15, 87));
+		nphy->bb_mult_save = (tmp & 0xFFFF) | 0x80000000;
+	}
+
+	if (!dev->phy.is_40mhz)
+		tmp = 0x6464;
+	else
+		tmp = 0x4747;
+	b43_ntab_write(dev, B43_NTAB16(15, 87), tmp);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, false);
+
+	b43_phy_write(dev, B43_NPHY_SAMP_DEPCNT, (samps - 1));
+
+	if (loops != 0xFFFF)
+		b43_phy_write(dev, B43_NPHY_SAMP_LOOPCNT, (loops - 1));
+	else
+		b43_phy_write(dev, B43_NPHY_SAMP_LOOPCNT, loops);
+
+	b43_phy_write(dev, B43_NPHY_SAMP_WAITCNT, wait);
+
+	seq_mode = b43_phy_read(dev, B43_NPHY_RFSEQMODE);
+
+	b43_phy_set(dev, B43_NPHY_RFSEQMODE, B43_NPHY_RFSEQMODE_CAOVER);
+	if (iqmode) {
+		b43_phy_mask(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x7FFF);
+		b43_phy_set(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8000);
+	} else {
+		if (dac_test)
+			b43_phy_write(dev, B43_NPHY_SAMP_CMD, 5);
+		else
+			b43_phy_write(dev, B43_NPHY_SAMP_CMD, 1);
+	}
+	for (i = 0; i < 100; i++) {
+		if (b43_phy_read(dev, B43_NPHY_RFSEQST) & 1) {
+			i = 0;
+			break;
+		}
+		udelay(10);
+	}
+	if (i)
+		b43err(dev->wl, "run samples timeout\n");
+
+	b43_phy_write(dev, B43_NPHY_RFSEQMODE, seq_mode);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
 static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 {
@@ -1869,8 +1929,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		freq = 5000;
 
 	if (nphy->mphase_cal_phase_id > 2)
-		;/* TODO: Call N PHY Run Samples with (band width * 8),
-			0xFFFF, 0, 1, 0 as arguments */
+		b43_nphy_run_samples(dev, (dev->phy.is_40mhz ? 40 : 20) * 8,
+					0xFFFF, 0, true, false);
 	else
 		;/* TODO: Call N PHY TX Tone with freq, 250, 1, 0 as arguments
 			and save result as error */
@@ -2162,8 +2222,8 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 					as arguments and save result as ret */
 				playtone = false;
 			} else {
-				/* TODO: Call N PHY Run Samples with 160,
-					0xFFFF, 0, 0, 0 as arguments */
+				b43_nphy_run_samples(dev, 160, 0xFFFF, 0,
+							false, false);
 			}
 
 			if (ret == 0) {
-- 
cgit v1.2.3


From 45ca697e60eb5d3cac4530ae3a88f96c297efb09 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 22 Jan 2010 01:53:15 +0100
Subject: b43: N-PHY: add setting power amplifier filters
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c       | 41 ++++++++++++++++++++++++++++++++--
 drivers/net/wireless/b43/tables_nphy.c | 24 ++++++++++++++++++++
 drivers/net/wireless/b43/tables_nphy.h |  1 +
 3 files changed, 64 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index f5900f04ff5c..97a44e43d057 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1628,6 +1628,43 @@ static void b43_nphy_update_tx_cal_ladder(struct b43_wldev *dev, u16 core)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ExtPaSetTxDigiFilts */
+static void b43_nphy_ext_pa_set_tx_dig_filters(struct b43_wldev *dev)
+{
+	int i;
+	for (i = 0; i < 15; i++)
+		b43_phy_write(dev, B43_PHY_N(0x2C5 + i),
+				tbl_tx_filter_coef_rev4[2][i]);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/IpaSetTxDigiFilts */
+static void b43_nphy_int_pa_set_tx_dig_filters(struct b43_wldev *dev)
+{
+	int i, j;
+	/* B43_NPHY_TXF_20CO_S0A1, B43_NPHY_TXF_40CO_S0A1, unknown */
+	u16 offset[] = { 0x186, 0x195, 0x2C5 };
+
+	for (i = 0; i < 3; i++)
+		for (j = 0; j < 15; j++)
+			b43_phy_write(dev, B43_PHY_N(offset[i] + j),
+					tbl_tx_filter_coef_rev4[i][j]);
+
+	if (dev->phy.is_40mhz) {
+		for (j = 0; j < 15; j++)
+			b43_phy_write(dev, B43_PHY_N(offset[0] + j),
+					tbl_tx_filter_coef_rev4[3][j]);
+	} else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+		for (j = 0; j < 15; j++)
+			b43_phy_write(dev, B43_PHY_N(offset[0] + j),
+					tbl_tx_filter_coef_rev4[5][j]);
+	}
+
+	if (dev->phy.channel == 14)
+		for (j = 0; j < 15; j++)
+			b43_phy_write(dev, B43_PHY_N(offset[0] + j),
+					tbl_tx_filter_coef_rev4[6][j]);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetTxGain */
 static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 {
@@ -2371,9 +2408,9 @@ int b43_phy_initn(struct b43_wldev *dev)
 		b43_phy_set(dev, B43_NPHY_PAPD_EN1, 0x1);
 		b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ1, 0x007F,
 				nphy->papd_epsilon_offset[1] << 7);
-		/* TODO N PHY IPA Set TX Dig Filters */
+		b43_nphy_int_pa_set_tx_dig_filters(dev);
 	} else if (phy->rev >= 5) {
-		/* TODO N PHY Ext PA Set TX Dig Filters */
+		b43_nphy_ext_pa_set_tx_dig_filters(dev);
 	}
 
 	b43_nphy_workarounds(dev);
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index dd9687d611d7..a00d509150f7 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2883,6 +2883,30 @@ const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
 	0x9084, 0x9267, 0x9056, 0x9234
 };
 
+const s16 tbl_tx_filter_coef_rev4[7][15] = {
+	{  -377,   137,  -407,   208, -1527,
+	    956,    93,   186,    93,   230,
+	    -44,   230,    20,  -191,   201 },
+	{   -77,    20,   -98,    49,   -93,
+	     60,    56,   111,    56,    26,
+	     -5,    26,    34,   -32,    34 },
+	{  -360,   164,  -376,   164, -1533,
+	    576,   308,  -314,   308,   121,
+	    -73,   121,    91,   124,    91 },
+	{  -295,   200,  -363,   142, -1391,
+	    826,   151,   301,   151,   151,
+	    301,   151,   602,  -752,   602 },
+	{   -92,    58,   -96,    49,  -104,
+	     44,    17,    35,    17,    12,
+	     25,    12,    13,    27,    13 },
+	{  -375,   136,  -399,   209, -1479,
+	    949,   130,   260,   130,   230,
+	    -44,   230,   201,  -191,   201 },
+	{ 0xed9,  0xc8, 0xe95,  0x8e, 0xa91,
+	  0x33a,  0x97, 0x12d,  0x97,  0x97,
+	  0x12d,  0x97, 0x25a, 0xd10, 0x25a }
+};
+
 /* addr0,  addr1,  bmask,  shift */
 const struct nphy_rf_control_override_rev2 tbl_rf_control_override_rev2[] = {
 	{ 0x78, 0x78, 0x0038,  3 }, /* for field == 0x0002 (fls == 2) */
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 5d38172a152d..9c1c6ecd3672 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -193,6 +193,7 @@ extern const u16 tbl_tx_iqlo_cal_cmds_recal_nphyrev3[];
 extern const u16 tbl_tx_iqlo_cal_cmds_recal[];
 extern const u16 tbl_tx_iqlo_cal_cmds_fullcal[];
 extern const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[];
+extern const s16 tbl_tx_filter_coef_rev4[7][15];
 
 extern const struct nphy_rf_control_override_rev2
 	tbl_rf_control_override_rev2[];
-- 
cgit v1.2.3


From 59af099b1956086b06c0d0f32ea99ce136b415b7 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Fri, 22 Jan 2010 01:53:16 +0100
Subject: b43: N-PHY: add TX tone
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 60 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 55 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 97a44e43d057..a45a1f3ced42 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -816,6 +816,43 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GenLoadSamples */
+static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
+					bool test)
+{
+	int i;
+	u16 bw, len, num, rot, angle;
+	/* TODO: *buffer; */
+
+	bw = (dev->phy.is_40mhz) ? 40 : 20;
+	len = bw << 3;
+
+	if (test) {
+		if (b43_phy_read(dev, B43_NPHY_BBCFG) & B43_NPHY_BBCFG_RSTRX)
+			bw = 82;
+		else
+			bw = 80;
+
+		if (dev->phy.is_40mhz)
+			bw <<= 1;
+
+		len = bw << 1;
+	}
+
+	/* TODO: buffer = kzalloc(len * sizeof(u32), GFP_KERNEL); */
+	num = len;
+	rot = (((freq * 36) / bw) << 16) / 100;
+	angle = 0;
+
+	for (i = 0; i < num; i++) {
+		/* TODO */
+	}
+
+	/* TODO: Call N PHY Load Sample Table with buffer, num as arguments */
+	/* TODO: kfree(buffer); */
+	return num;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RunSamples */
 static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
 					u16 wait, bool iqmode, bool dac_test)
@@ -876,6 +913,20 @@ static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
 	b43_phy_write(dev, B43_NPHY_RFSEQMODE, seq_mode);
 }
 
+/*
+ * Transmits a known value for LO calibration
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/TXTone
+ */
+static int b43_nphy_tx_tone(struct b43_wldev *dev, u32 freq, u16 max_val,
+				bool iqmode, bool dac_test)
+{
+	u16 samp = b43_nphy_gen_load_samples(dev, freq, max_val, dac_test);
+	if (samp == 0)
+		return -1;
+	b43_nphy_run_samples(dev, samp, 0xFFFF, 0, iqmode, dac_test);
+	return 0;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
 static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 {
@@ -1969,8 +2020,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		b43_nphy_run_samples(dev, (dev->phy.is_40mhz ? 40 : 20) * 8,
 					0xFFFF, 0, true, false);
 	else
-		;/* TODO: Call N PHY TX Tone with freq, 250, 1, 0 as arguments
-			and save result as error */
+		error = b43_nphy_tx_tone(dev, freq, 250, true, false);
 
 	if (error == 0) {
 		if (nphy->mphase_cal_phase_id > 2) {
@@ -2254,9 +2304,9 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 			b43_nphy_stop_playback(dev);
 
 			if (playtone) {
-				/* TODO: Call N PHY TX Tone with 4000,
-					(nphy_rxcalparams & 0xffff), 0, 0
-					as arguments and save result as ret */
+				ret = b43_nphy_tx_tone(dev, 4000,
+						(nphy->rxcalparams & 0xFFFF),
+						false, false);
 				playtone = false;
 			} else {
 				b43_nphy_run_samples(dev, 160, 0xFFFF, 0,
-- 
cgit v1.2.3


From b92f7d30830a319148df2943b7565989494e5ad1 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Fri, 22 Jan 2010 08:01:11 +0100
Subject: p54pci: revise tx locking

This patch continues the effort which began with:
"[PATCH] p54pci: move tx cleanup into tasklet".

Thanks to these changes, p54pci's interrupt & tx
cleanup routines can be made lock-less.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54pci.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 48cae48ed6eb..bda29c00f3ef 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -238,7 +238,6 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 	int ring_index, struct p54p_desc *ring, u32 ring_limit,
 	struct sk_buff **tx_buf)
 {
-	unsigned long flags;
 	struct p54p_priv *priv = dev->priv;
 	struct p54p_ring_control *ring_control = priv->ring_control;
 	struct p54p_desc *desc;
@@ -249,7 +248,6 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 	(*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
 	idx %= ring_limit;
 
-	spin_lock_irqsave(&priv->lock, flags);
 	while (i != idx) {
 		desc = &ring[i];
 
@@ -264,16 +262,12 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 		desc->len = 0;
 		desc->flags = 0;
 
-		if (skb && FREE_AFTER_TX(skb)) {
-			spin_unlock_irqrestore(&priv->lock, flags);
+		if (skb && FREE_AFTER_TX(skb))
 			p54_free_skb(dev, skb);
-			spin_lock_irqsave(&priv->lock, flags);
-		}
 
 		i++;
 		i %= ring_limit;
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static void p54p_tasklet(unsigned long dev_id)
@@ -306,7 +300,6 @@ static irqreturn_t p54p_interrupt(int irq, void *dev_id)
 	struct p54p_priv *priv = dev->priv;
 	__le32 reg;
 
-	spin_lock(&priv->lock);
 	reg = P54P_READ(int_ident);
 	if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) {
 		goto out;
@@ -321,15 +314,14 @@ static irqreturn_t p54p_interrupt(int irq, void *dev_id)
 		complete(&priv->boot_comp);
 
 out:
-	spin_unlock(&priv->lock);
 	return reg ? IRQ_HANDLED : IRQ_NONE;
 }
 
 static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
+	unsigned long flags;
 	struct p54p_priv *priv = dev->priv;
 	struct p54p_ring_control *ring_control = priv->ring_control;
-	unsigned long flags;
 	struct p54p_desc *desc;
 	dma_addr_t mapping;
 	u32 device_idx, idx, i;
@@ -370,14 +362,14 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	unsigned int i;
 	struct p54p_desc *desc;
 
-	tasklet_kill(&priv->tasklet);
-
 	P54P_WRITE(int_enable, cpu_to_le32(0));
 	P54P_READ(int_enable);
 	udelay(10);
 
 	free_irq(priv->pdev->irq, dev);
 
+	tasklet_kill(&priv->tasklet);
+
 	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
 
 	for (i = 0; i < ARRAY_SIZE(priv->rx_buf_data); i++) {
-- 
cgit v1.2.3


From 60abe78279568a7109db2bcbc71131766a91c2e5 Mon Sep 17 00:00:00 2001
From: Ron Murray <rjmx@rjmx.net>
Date: Tue, 19 Jan 2010 08:02:48 +0000
Subject: Please add support for Microsoft MN-120 PCMCIA network card

Please add support for Microsoft MN-120 PCMCIA network card. It's an
old card, I know, but adding support is very easy. You just need to
get tulip_core.c to recognise its vendor/device ID.

Patch for kernel 2.6.32.4 (and many previous) attached.

 .....Ron Murray

Signed-off-by: Ron Murray <rjmx@rjmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/tulip_core.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 595777dcadb1..20696b5d60a5 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -249,6 +249,7 @@ static struct pci_device_id tulip_pci_tbl[] = {
 	{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
 	{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
+	{ 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */
 	{ 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ } /* terminate list */
 };
-- 
cgit v1.2.3


From fa4281bbbcb44d1f8bdac894ad0696535272cc43 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Thu, 21 Jan 2010 22:51:36 +0000
Subject: be2net: swap only first 2 fields of mcc_wrb

Only the first two fields of mcc wrb - embedded, payload_len
need to be cpu_to_le32() swapped while issuing a cmd to the hw.
The fields tag0, tag1 are opaque and returned back to cpu as is...

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_cmds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 102ade134165..fee6eee7ae5b 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -286,7 +286,7 @@ static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
 				MCC_WRB_SGE_CNT_SHIFT;
 	wrb->payload_length = payload_len;
 	wrb->tag0 = opcode;
-	be_dws_cpu_to_le(wrb, 20);
+	be_dws_cpu_to_le(wrb, 8);
 }
 
 /* Don't touch the hdr after it's prepared */
-- 
cgit v1.2.3


From 33d7959a7a9ef36573bfd0cc85ebef29ed4b846d Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Fri, 22 Jan 2010 11:56:25 +0000
Subject: fmvj18x_cs: add new id (Panasonic lan & modem card)

fmvj18x_cs, serial_cs:
 add new id
 Panasonic lan & modem card (model name:AL-VML101)

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/fmvj18x_cs.c | 1 +
 drivers/serial/serial_cs.c      | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 813aca3fc433..7b17404d0858 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -717,6 +717,7 @@ static struct pcmcia_device_id fmvj18x_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 	PCMCIA_DEVICE_NULL,
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index df854401af2d..95421fa3b304 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -758,6 +758,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
-- 
cgit v1.2.3


From 9926146b15fd96d78a4f7c32e7a26d50639369f4 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Fri, 22 Jan 2010 22:56:16 +0000
Subject: e1000/e1000e: don't use small hardware rx buffers

When testing the "e1000: enhance frame fragment detection" (and e1000e)
patches we found some bugs with reducing the MTU size.  The 1024 byte
descriptor used with the 1000 mtu test also (re) introduced the
(originally) reported bug, and causes us to need the e1000_clean_tx_irq
"enhance frame fragment detection" fix.

So what has occured here is that 2.6.32 is only vulnerable for mtu <
1500 due to the jumbo specific routines in both e1000 and e1000e.
So, 2.6.32 needs the 2kB buffer len fix for those smaller MTUs, but
is not vulnerable to the original issue reported.  It has been pointed
out that this vulnerability needs to be patched in older kernels that
don't have the e1000 jumbo routine.  Without the jumbo routines, we
need the "enhance frame fragment detection" fix the e1000, old
e1000e is only vulnerable for < 1500 mtu, and needs a similar
fix.  We split the patches up to provide easy backport paths.

There is only a slight bit of extra code when this fix and the
original "enhance frame fragment detection" fixes are applied, so
please apply both, even though it is a bit of overkill.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 20 +-------------------
 drivers/net/e1000e/netdev.c    | 20 +-------------------
 2 files changed, 2 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index a53a2017c537..d29bb532eccf 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1698,18 +1698,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
 	switch (adapter->rx_buffer_len) {
-		case E1000_RXBUFFER_256:
-			rctl |= E1000_RCTL_SZ_256;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
-		case E1000_RXBUFFER_512:
-			rctl |= E1000_RCTL_SZ_512;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
-		case E1000_RXBUFFER_1024:
-			rctl |= E1000_RCTL_SZ_1024;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
 		case E1000_RXBUFFER_2048:
 		default:
 			rctl |= E1000_RCTL_SZ_2048;
@@ -3176,13 +3164,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	 *  however with the new *_jumbo_rx* routines, jumbo receives will use
 	 *  fragmented skbs */
 
-	if (max_frame <= E1000_RXBUFFER_256)
-		adapter->rx_buffer_len = E1000_RXBUFFER_256;
-	else if (max_frame <= E1000_RXBUFFER_512)
-		adapter->rx_buffer_len = E1000_RXBUFFER_512;
-	else if (max_frame <= E1000_RXBUFFER_1024)
-		adapter->rx_buffer_len = E1000_RXBUFFER_1024;
-	else if (max_frame <= E1000_RXBUFFER_2048)
+	if (max_frame <= E1000_RXBUFFER_2048)
 		adapter->rx_buffer_len = E1000_RXBUFFER_2048;
 	else
 #if (PAGE_SIZE >= E1000_RXBUFFER_16384)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 1ea395b6c992..3d887104a0d8 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2350,18 +2350,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
 	switch (adapter->rx_buffer_len) {
-	case 256:
-		rctl |= E1000_RCTL_SZ_256;
-		rctl &= ~E1000_RCTL_BSEX;
-		break;
-	case 512:
-		rctl |= E1000_RCTL_SZ_512;
-		rctl &= ~E1000_RCTL_BSEX;
-		break;
-	case 1024:
-		rctl |= E1000_RCTL_SZ_1024;
-		rctl &= ~E1000_RCTL_BSEX;
-		break;
 	case 2048:
 	default:
 		rctl |= E1000_RCTL_SZ_2048;
@@ -4334,13 +4322,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	 * fragmented skbs
 	 */
 
-	if (max_frame <= 256)
-		adapter->rx_buffer_len = 256;
-	else if (max_frame <= 512)
-		adapter->rx_buffer_len = 512;
-	else if (max_frame <= 1024)
-		adapter->rx_buffer_len = 1024;
-	else if (max_frame <= 2048)
+	if (max_frame <= 2048)
 		adapter->rx_buffer_len = 2048;
 	else
 		adapter->rx_buffer_len = 4096;
-- 
cgit v1.2.3


From 1ada1b1b41b0e54291aca67eed4bd42e61e7e529 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:45:43 +0000
Subject: ixgbe: Set the correct pool when VLANs are added in SR-IOV mode.

When VFs are allocated (as indicated by adapter->num_vfs is non-zero) then
the PF pool is no longer zero.  Instead it will be the same as the number
of VFs allocated.  When setting the VLVF entry for the PF we need to use
the correct pool otherwise the PF will get VLAN packets from the wire
because the packet will pass VFTA filtering and the PF has the default
pool, but it will not get VLAN packets from the VFs because it has
not set the correct pool bit in the VLVF entry.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index c46252520d7a..b8fd81748602 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2432,15 +2432,17 @@ static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
+	int pool_ndx = adapter->num_vfs;
 
 	/* add VID to filter table */
-	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
+	hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, true);
 }
 
 static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
+	int pool_ndx = adapter->num_vfs;
 
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
 		ixgbe_irq_disable(adapter);
@@ -2451,7 +2453,7 @@ static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 		ixgbe_irq_enable(adapter);
 
 	/* remove VID from filter table */
-	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
+	hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, false);
 }
 
 static void ixgbe_vlan_rx_register(struct net_device *netdev,
-- 
cgit v1.2.3


From ef291b8c71ee934d077676b891494c50e17ccc28 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:46:02 +0000
Subject: ixgbe: Remove unused emulation MAC storage from the per VF data
 structure.

This data storage for SW emulated MAC addresses is unlikely to ever be used
so pull it.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index db64f139f173..e576fb4740bc 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -110,7 +110,6 @@ struct vf_data_storage {
 	u16 num_vf_mc_hashes;
 	u16 default_vf_vlan_id;
 	u16 vlans_enabled;
-	unsigned char em_mac_addresses[MAX_EMULATION_MAC_ADDRS * ETH_ALEN];
 	bool clear_to_send;
 	int rar;
 };
-- 
cgit v1.2.3


From c9205697c7527173c8f8bfa9f8c9dabdbced3c49 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:46:22 +0000
Subject: ixgbe: Allow the VF driver to be loaded before the PF driver

The PF Reset Done bit should not be set in the extended control register
until the PF has actually completed the bring up process.  It is a mis-
interpretation of the purpose of this bit to assume it should be set
when the physical reset of the device is done.  Instead it should be used
to indicate to the VFs when the PF is ready to provide them with required
services.  This is not until after the PF is finished coming up and ready
to process mailbox events.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_82599.c | 6 +-----
 drivers/net/ixgbe/ixgbe_main.c  | 7 +++++++
 2 files changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index c92b5b8b3181..d4ed6adb7975 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -890,7 +890,7 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
 static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 {
 	s32 status = 0;
-	u32 ctrl, ctrl_ext;
+	u32 ctrl;
 	u32 i;
 	u32 autoc;
 	u32 autoc2;
@@ -945,10 +945,6 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 		status = IXGBE_ERR_RESET_FAILED;
 		hw_dbg(hw, "Reset polling failed to complete.\n");
 	}
-	/* Clear PF Reset Done bit so PF/VF Mail Ops can work */
-	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
-	ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
-	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
 
 	msleep(50);
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b8fd81748602..b96afd98fa3d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2826,6 +2826,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	u32 txdctl, rxdctl, mhadd;
 	u32 dmatxctl;
 	u32 gpie;
+	u32 ctrl_ext;
 
 	ixgbe_get_hw_control(adapter);
 
@@ -3015,6 +3016,12 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
 	adapter->link_check_timeout = jiffies;
 	mod_timer(&adapter->watchdog_timer, jiffies);
+
+	/* Set PF Reset Done bit so PF/VF Mail Ops can work */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 767081adbd920ce93e3f1cbe797d0631637f92b3 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:46:40 +0000
Subject: ixgbe: Improve reset coordination between the PF and the VF

Inadequate coordination between the PF driver and the VF driver results
in tx hangs in the VF driver when you perform certain actions that will
lead to a re-init of the PF.  Add feature to notify active VFs when the PF
is about to re-initialize so that the VFs can take appropriate action.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c  | 11 +++++++++++
 drivers/net/ixgbe/ixgbe_sriov.c | 26 ++++++++++++++++++++++++++
 drivers/net/ixgbe/ixgbe_sriov.h |  2 ++
 3 files changed, 39 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b96afd98fa3d..ee41d331a35f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3203,6 +3203,17 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	/* signal that we are down to the interrupt handler */
 	set_bit(__IXGBE_DOWN, &adapter->state);
 
+	/* disable receive for all VFs and wait one second */
+	if (adapter->num_vfs) {
+		for (i = 0 ; i < adapter->num_vfs; i++)
+			adapter->vfinfo[i].clear_to_send = 0;
+
+		/* ping all the active vfs to let them know we are going down */
+		ixgbe_ping_all_vfs(adapter);
+		/* Disable all VFTE/VFRE TX/RX */
+		ixgbe_disable_tx_rx(adapter);
+	}
+
 	/* disable receives */
 	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 74bca74d57c1..d4cd20f30199 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -334,3 +334,29 @@ void ixgbe_msg_task(struct ixgbe_adapter *adapter)
 	}
 }
 
+void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	/* disable transmit and receive for all vfs */
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
+
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
+}
+
+void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 ping;
+	int i;
+
+	for (i = 0 ; i < adapter->num_vfs; i++) {
+		ping = IXGBE_PF_CONTROL_MSG;
+		if (adapter->vfinfo[i].clear_to_send)
+			ping |= IXGBE_VT_MSGTYPE_CTS;
+		ixgbe_write_mbx(hw, &ping, 1, i);
+	}
+}
+
diff --git a/drivers/net/ixgbe/ixgbe_sriov.h b/drivers/net/ixgbe/ixgbe_sriov.h
index 664b237eacb9..51d1106c45a1 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ixgbe/ixgbe_sriov.h
@@ -39,6 +39,8 @@ void ixgbe_msg_task(struct ixgbe_adapter *adapter);
 int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
                      int vf, unsigned char *mac_addr);
 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask);
+void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter);
+void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
 void ixgbe_dump_registers(struct ixgbe_adapter *adapter);
 
 #endif /* _IXGBE_SRIOV_H_ */
-- 
cgit v1.2.3


From a9ee25a2b87c8077042ce23d3231f67f026719b0 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:47:00 +0000
Subject: ixgbevf: Take action when the PF notifies the VF it is resetting.

When the VF driver gets a control message from the PF that indicates the
PF is about to reset or go down we schedule the watchdog timer so that
it will detect the PF has gone offline and take appropriate action.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/ixgbevf_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 39544afdc57f..bd2fd4608ed7 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -956,10 +956,17 @@ static irqreturn_t ixgbevf_msix_mbx(int irq, void *data)
 	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 eicr;
+	u32 msg;
 
 	eicr = IXGBE_READ_REG(hw, IXGBE_VTEICS);
 	IXGBE_WRITE_REG(hw, IXGBE_VTEICR, eicr);
 
+	hw->mbx.ops.read(hw, &msg, 1);
+
+	if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG)
+		mod_timer(&adapter->watchdog_timer,
+			  round_jiffies(jiffies + 10));
+
 	return IRQ_HANDLED;
 }
 
-- 
cgit v1.2.3


From c0456c231a8b2981128cc29e211b7bad1bd997df Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:47:18 +0000
Subject: ixgbevf: Fix panics in the VF driver

Fix panics in the VF driver that occur when you bring it down after
having already brought the PF down.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/ixgbevf_main.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index bd2fd4608ed7..0a27fa17e7ff 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -1693,8 +1693,10 @@ static void ixgbevf_clean_rx_ring(struct ixgbevf_adapter *adapter,
 	unsigned long size;
 	unsigned int i;
 
-	/* Free all the Rx ring sk_buffs */
+	if (!rx_ring->rx_buffer_info)
+		return;
 
+	/* Free all the Rx ring sk_buffs */
 	for (i = 0; i < rx_ring->count; i++) {
 		struct ixgbevf_rx_buffer *rx_buffer_info;
 
@@ -1751,6 +1753,9 @@ static void ixgbevf_clean_tx_ring(struct ixgbevf_adapter *adapter,
 	unsigned long size;
 	unsigned int i;
 
+	if (!tx_ring->tx_buffer_info)
+		return;
+
 	/* Free all the Tx ring sk_buffs */
 
 	for (i = 0; i < tx_ring->count; i++) {
@@ -1843,12 +1848,24 @@ void ixgbevf_down(struct ixgbevf_adapter *adapter)
 
 void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter)
 {
+	struct ixgbe_hw *hw = &adapter->hw;
+
 	WARN_ON(in_interrupt());
+
 	while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
 		msleep(1);
 
-	ixgbevf_down(adapter);
-	ixgbevf_up(adapter);
+	/*
+	 * Check if PF is up before re-init.  If not then skip until
+	 * later when the PF is up and ready to service requests from
+	 * the VF via mailbox.  If the VF is up and running then the
+	 * watchdog task will continue to schedule reset tasks until
+	 * the PF is up and running.
+	 */
+	if (!hw->mac.ops.reset_hw(hw)) {
+		ixgbevf_down(adapter);
+		ixgbevf_up(adapter);
+	}
 
 	clear_bit(__IXGBEVF_RESETTING, &adapter->state);
 }
@@ -2423,7 +2440,6 @@ void ixgbevf_free_tx_resources(struct ixgbevf_adapter *adapter,
 {
 	struct pci_dev *pdev = adapter->pdev;
 
-
 	ixgbevf_clean_tx_ring(adapter, tx_ring);
 
 	vfree(tx_ring->tx_buffer_info);
-- 
cgit v1.2.3


From da6b33306801af7ee6479c177051e70842974932 Mon Sep 17 00:00:00 2001
From: Greg Rose <gregory.v.rose@intel.com>
Date: Fri, 22 Jan 2010 22:47:37 +0000
Subject: ixgbevf: Tell network stack to stop tx when the VF detects PF reset

When the VF detects that the PF has reset turn off carrier and stop all
tx queues.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/ixgbevf_main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 0a27fa17e7ff..623353db11ba 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -2381,6 +2381,8 @@ static void ixgbevf_watchdog_task(struct work_struct *work)
 					    &link_up, false)) != 0) {
 			adapter->link_up = link_up;
 			adapter->link_speed = link_speed;
+			netif_carrier_off(netdev);
+			netif_tx_stop_all_queues(netdev);
 			schedule_work(&adapter->reset_task);
 			goto pf_has_reset;
 		}
-- 
cgit v1.2.3


From 8581145f39c39b00cd1b6a2dcb4ce5bf7d8d6070 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Sat, 23 Jan 2010 01:35:00 -0800
Subject: igb/igbvf: cleanup exception handling in tx_map_adv

After removing the skb_dma_map/unmap calls the exception handling in
igb_tx_map_adv is not correct.  The issue is that the count value was not
being correctly handled so as a result we were not rewinding the ring as
back as we should have been.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 2 +-
 drivers/net/igbvf/netdev.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 933c64ff2465..2ca173453b66 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3584,6 +3584,7 @@ static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
 
+		count++;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
@@ -3605,7 +3606,6 @@ static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
 		if (pci_dma_mapping_error(pdev, buffer_info->dma))
 			goto dma_error;
 
-		count++;
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 10e038adba0f..43c8375f1110 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2126,6 +2126,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
 
+		count++;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
@@ -2146,7 +2147,6 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 						PCI_DMA_TODEVICE);
 		if (pci_dma_mapping_error(pdev, buffer_info->dma))
 			goto dma_error;
-		count++;
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
-- 
cgit v1.2.3


From 8e1e8a4779cb23c1d9f51e9223795e07ec54d77a Mon Sep 17 00:00:00 2001
From: Sridhar Samudrala <sri@us.ibm.com>
Date: Sat, 23 Jan 2010 02:02:21 -0800
Subject: net: Fix IPv6 GSO type checks in Intel ethernet drivers

Found this problem when testing IPv6 from a KVM guest to a remote
host via e1000e device on the host.
The following patch fixes the check for IPv6 GSO packet in Intel
ethernet drivers to use skb_is_gso_v6(). SKB_GSO_DODGY is also set
when packets are forwarded from a guest.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/netdev.c    | 2 +-
 drivers/net/igb/igb_main.c     | 2 +-
 drivers/net/igbvf/netdev.c     | 2 +-
 drivers/net/ixgbe/ixgbe_main.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3d887104a0d8..57f149b75fbe 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3786,7 +3786,7 @@ static int e1000_tso(struct e1000_adapter *adapter,
 		                                         0, IPPROTO_TCP, 0);
 		cmd_length = E1000_TXD_CMD_IP;
 		ipcse = skb_transport_offset(skb) - 1;
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 		                                       &ipv6_hdr(skb)->daddr,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 2ca173453b66..997124d2992a 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3422,7 +3422,7 @@ static inline int igb_tso_adv(struct igb_ring *tx_ring,
 							 iph->daddr, 0,
 							 IPPROTO_TCP,
 							 0);
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 						       &ipv6_hdr(skb)->daddr,
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 43c8375f1110..297a5ddd77f0 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -1963,7 +1963,7 @@ static int igbvf_tso(struct igbvf_adapter *adapter,
 		                                         iph->daddr, 0,
 		                                         IPPROTO_TCP,
 		                                         0);
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 		                                       &ipv6_hdr(skb)->daddr,
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 6d61add27a06..b5f64ad67975 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4928,7 +4928,7 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 			                                         iph->daddr, 0,
 			                                         IPPROTO_TCP,
 			                                         0);
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		} else if (skb_is_gso_v6(skb)) {
 			ipv6_hdr(skb)->payload_len = 0;
 			tcp_hdr(skb)->check =
 			    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-- 
cgit v1.2.3


From 9010bc3364db56dd88a1851e0797e597e322ce08 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Sat, 23 Jan 2010 02:06:26 -0800
Subject: ixgbevf: Fix IPv6 GSO type checks

Based on patch from Sridhar Samudrala

The following patch fixes the check for IPv6 GSO packet in ixgbevf
driver to use skb_is_gso_v6(). SKB_GSO_DODGY is also set
when packets are forwarded from a guest.

CC: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbevf/ixgbevf_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 623353db11ba..7b3af107ca84 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -2781,7 +2781,7 @@ static int ixgbevf_tso(struct ixgbevf_adapter *adapter,
 								 IPPROTO_TCP,
 								 0);
 			adapter->hw_tso_ctxt++;
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		} else if (skb_is_gso_v6(skb)) {
 			ipv6_hdr(skb)->payload_len = 0;
 			tcp_hdr(skb)->check =
 			    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-- 
cgit v1.2.3


From 2ca4231de7f7a5fd7137bac152030ba71f15e8c3 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Sat, 23 Jan 2010 02:09:26 -0800
Subject: sky2: Enable/disable WOL per hardware device

Y2_HW_WOL_ON/Y2_HW_WOL_OFF should be set and cleared per chip,
not per port.  On dual port cards, Y2_HW_WOL_ON should be
enabled if either sky2 port has WOL enabled.

Found while reviewing code for a WOL regression, though this is
probably not the cause of the regression.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 37f486b65f63..02d0b42e436c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3228,6 +3228,27 @@ static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
 	return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
 }
 
+static void sky2_hw_set_wol(struct sky2_hw *hw)
+{
+	int wol = 0;
+	int i;
+
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		if (sky2->wol)
+			wol = 1;
+	}
+
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+	    hw->chip_id == CHIP_ID_YUKON_EX ||
+	    hw->chip_id == CHIP_ID_YUKON_FE_P)
+		sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+
+	device_set_wakeup_enable(&hw->pdev->dev, wol);
+}
+
 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	const struct sky2_port *sky2 = netdev_priv(dev);
@@ -3247,13 +3268,7 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 
 	sky2->wol = wol->wolopts;
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
-	    hw->chip_id == CHIP_ID_YUKON_EX ||
-	    hw->chip_id == CHIP_ID_YUKON_FE_P)
-		sky2_write32(hw, B0_CTST, sky2->wol
-			     ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
-
-	device_set_wakeup_enable(&hw->pdev->dev, sky2->wol);
+	sky2_hw_set_wol(hw);
 
 	if (!netif_running(dev))
 		sky2_wol_init(sky2);
-- 
cgit v1.2.3


From a40ccc6868943e74ec12f26a266ce1d0373b2b32 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Sun, 24 Jan 2010 18:46:06 +0000
Subject: sky2: revert config space change

Obviously, this register had some other impact that is causing
the regression.  Either it is masking some other access or needs
to be reset in some path.

Either, way it is best to just revert the change for 2.6.33

This reverts commit 166a0fd4c788ec7f10ca8194ec6d526afa12db75.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 02d0b42e436c..d760650c5c04 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -644,6 +644,7 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
 {
 	u32 reg1;
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 &= ~phy_power[port];
 
@@ -651,6 +652,7 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
 		reg1 |= coma_mode[port];
 
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
 
 	if (hw->chip_id == CHIP_ID_YUKON_FE)
@@ -707,9 +709,11 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
 	}
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 |= phy_power[port];		/* set PHY to PowerDown/COMA Mode */
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 }
 
 /* Force a renegotiation */
@@ -2149,7 +2153,9 @@ static void sky2_qlink_intr(struct sky2_hw *hw)
 
 	/* reset PHY Link Detect */
 	phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	sky2_link_up(sky2);
 }
@@ -2640,6 +2646,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2647,12 +2654,14 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
 		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
 		u32 err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
 			     0xfffffffful);
@@ -2660,6 +2669,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
 		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -3038,6 +3048,7 @@ static void sky2_reset(struct sky2_hw *hw)
 	}
 
 	sky2_power_on(hw);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
@@ -3074,6 +3085,7 @@ static void sky2_reset(struct sky2_hw *hw)
 		reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
 
 		/* reset PHY Link Detect */
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4,
 				 reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
@@ -3091,6 +3103,7 @@ static void sky2_reset(struct sky2_hw *hw)
 			/* restore the PCIe Link Control register */
 			sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
 		}
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 		/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
 		sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
-- 
cgit v1.2.3


From 0b5d9b2689af0f59aeba67dc749b3681290d2166 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 22 Jan 2010 14:22:34 -0800
Subject: iwlwifi: fix pointer signedness warning

There are a few station addresses that are
char *, instead of the normal u8 *; gcc
gives pointer signedness warnings for some
of those, so use u8 * consistently.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-sta.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index cde09a890b73..90fbdb25399e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -297,7 +297,7 @@ u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
 }
 EXPORT_SYMBOL(iwl_add_station);
 
-static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr)
+static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr)
 {
 	unsigned long flags;
 	u8 sta_id = iwl_find_station(priv, addr);
@@ -324,7 +324,7 @@ static void iwl_remove_sta_callback(struct iwl_priv *priv,
 {
 	struct iwl_rem_sta_cmd *rm_sta =
 			(struct iwl_rem_sta_cmd *)cmd->cmd.payload;
-	const char *addr = rm_sta->addr;
+	const u8 *addr = rm_sta->addr;
 
 	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
-- 
cgit v1.2.3


From aa8bc9ef18a2c5b2b97e1f36ee9604cf15743f96 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 23 Jan 2010 20:04:18 +0100
Subject: ath9k: fix eeprom INI values override for 2GHz-only cards

Among other changes, this commit:

   commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9
   Author: Sujith <Sujith.Manoharan@atheros.com>
   Date:   Thu Feb 12 10:06:45 2009 +0530

   ath9k: Enable Fractional N mode

changed the hw attach code to fix up initialization values only for
dual band devices, however the commit message did not give a reason as
to why this would be useful or necessary.

According to tests by Jorge Boncompte, this breaks at least some
2GHz-only cards, so the code should be changed back to the
unconditional INI fixup.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Jorge Boncompte <jorge@dti2.net>
Cc: stable@kernel.org
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2ec61f08cfdb..ae371448b5a0 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -855,12 +855,11 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
 	}
 }
 
-static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah)
+static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah)
 {
 	u32 i, j;
 
-	if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
-	    test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
+	if (ah->hw_version.devid == AR9280_DEVID_PCI) {
 
 		/* EEPROM Fixup */
 		for (i = 0; i < ah->iniModes.ia_rows; i++) {
@@ -980,7 +979,7 @@ int ath9k_hw_init(struct ath_hw *ah)
 	if (r)
 		return r;
 
-	ath9k_hw_init_11a_eeprom_fix(ah);
+	ath9k_hw_init_eeprom_fix(ah);
 
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {
-- 
cgit v1.2.3


From 32e7bfc41110bc8f29ec0f293c3bcee6645fef34 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Mon, 25 Jan 2010 13:36:10 -0800
Subject: net: use helpers to access uc list V2

This patch introduces three macros to work with uc list from net drivers.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c                  |  5 ++---
 drivers/net/e1000/e1000_main.c      |  4 ++--
 drivers/net/igb/igb_main.c          |  7 ++++---
 drivers/net/ixgbe/ixgbe_common.c    |  7 +++----
 drivers/net/ixgbe/ixgbe_common.h    |  2 +-
 drivers/net/ixgbe/ixgbe_main.c      |  2 +-
 drivers/net/ixgbe/ixgbe_type.h      |  4 ++--
 drivers/net/mv643xx_eth.c           |  3 +--
 drivers/net/niu.c                   |  4 ++--
 drivers/net/stmmac/dwmac1000_core.c | 10 +++++-----
 drivers/net/virtio_net.c            | 12 +++++++-----
 drivers/s390/net/qeth_l2_main.c     |  2 +-
 include/linux/netdevice.h           |  5 +++++
 net/core/dev.c                      |  4 ++--
 14 files changed, 38 insertions(+), 33 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d83512d3e02f..a7b6b12c1c05 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -48,7 +48,6 @@
 #include <linux/cache.h>
 #include <linux/firmware.h>
 #include <linux/log2.h>
-#include <linux/list.h>
 
 #if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
 #define BCM_CNIC 1
@@ -3579,14 +3578,14 @@ bnx2_set_rx_mode(struct net_device *dev)
 		sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
 	}
 
-	if (dev->uc.count > BNX2_MAX_UNICAST_ADDRESSES) {
+	if (netdev_uc_count(dev) > BNX2_MAX_UNICAST_ADDRESSES) {
 		rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
 		sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN |
 			     BNX2_RPM_SORT_USER0_PROM_VLAN;
 	} else if (!(dev->flags & IFF_PROMISC)) {
 		/* Add all entries into to the match filter list */
 		i = 0;
-		list_for_each_entry(ha, &dev->uc.list, list) {
+		netdev_for_each_uc_addr(ha, dev) {
 			bnx2_set_mac_addr(bp, ha->addr,
 					  i + BNX2_START_UNICAST_ADDRESS_INDEX);
 			sort_mode |= (1 <<
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 87f575ca427d..2ce88c5f75c5 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2139,7 +2139,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			rctl |= E1000_RCTL_VFE;
 	}
 
-	if (netdev->uc.count > rar_entries - 1) {
+	if (netdev_uc_count(netdev) > rar_entries - 1) {
 		rctl |= E1000_RCTL_UPE;
 	} else if (!(netdev->flags & IFF_PROMISC)) {
 		rctl &= ~E1000_RCTL_UPE;
@@ -2162,7 +2162,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 */
 	i = 1;
 	if (use_uc)
-		list_for_each_entry(ha, &netdev->uc.list, list) {
+		netdev_for_each_uc_addr(ha, netdev) {
 			if (i == rar_entries)
 				break;
 			e1000_rar_set(hw, ha->addr, i++);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index d9679493c635..01cc29483e2f 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2905,12 +2905,13 @@ static int igb_write_uc_addr_list(struct net_device *netdev)
 	int count = 0;
 
 	/* return ENOMEM indicating insufficient memory for addresses */
-	if (netdev->uc.count > rar_entries)
+	if (netdev_uc_count(netdev) > rar_entries)
 		return -ENOMEM;
 
-	if (netdev->uc.count && rar_entries) {
+	if (!netdev_uc_empty(netdev) && rar_entries) {
 		struct netdev_hw_addr *ha;
-		list_for_each_entry(ha, &netdev->uc.list, list) {
+
+		netdev_for_each_uc_addr(ha, netdev) {
 			if (!rar_entries)
 				break;
 			igb_rar_set_qsel(adapter, ha->addr,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 276c2aaa800b..eb49020903c1 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -28,7 +28,6 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
-#include <linux/list.h>
 #include <linux/netdevice.h>
 
 #include "ixgbe.h"
@@ -1347,7 +1346,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
 /**
  *  ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
  *  @hw: pointer to hardware structure
- *  @uc_list: the list of new addresses
+ *  @netdev: pointer to net device structure
  *
  *  The given list replaces any existing list.  Clears the secondary addrs from
  *  receive address registers.  Uses unused receive address registers for the
@@ -1357,7 +1356,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
  *  manually putting the device into promiscuous mode.
  **/
 s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
-				      struct list_head *uc_list)
+				      struct net_device *netdev)
 {
 	u32 i;
 	u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
@@ -1381,7 +1380,7 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
 	}
 
 	/* Add the new addresses */
-	list_for_each_entry(ha, uc_list, list) {
+	netdev_for_each_uc_addr(ha, netdev) {
 		hw_dbg(hw, " Adding the secondary addresses:\n");
 		ixgbe_add_uc_addr(hw, ha->addr, 0);
 	}
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index dfff0ffaa502..13606d4809c9 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -60,7 +60,7 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
                                       u32 mc_addr_count,
                                       ixgbe_mc_addr_itr func);
 s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
-				      struct list_head *uc_list);
+				      struct net_device *netdev);
 s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index ee41d331a35f..439645d2aeef 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2568,7 +2568,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	/* reprogram secondary unicast list */
-	hw->mac.ops.update_uc_addr_list(hw, &netdev->uc.list);
+	hw->mac.ops.update_uc_addr_list(hw, netdev);
 
 	/* reprogram multicast list */
 	addr_count = netdev->mc_count;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index b4caa7011a2b..0db67c19b2c4 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -30,7 +30,7 @@
 
 #include <linux/types.h>
 #include <linux/mdio.h>
-#include <linux/list.h>
+#include <linux/netdevice.h>
 
 /* Vendor ID */
 #define IXGBE_INTEL_VENDOR_ID   0x8086
@@ -2405,7 +2405,7 @@ struct ixgbe_mac_operations {
 	s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
 	s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
 	s32 (*init_rx_addrs)(struct ixgbe_hw *);
-	s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct list_head *);
+	s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct net_device *);
 	s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
 	                           ixgbe_mc_addr_itr);
 	s32 (*enable_mc)(struct ixgbe_hw *);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index af67af55efe7..e24072a9a979 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,7 +55,6 @@
 #include <linux/types.h>
 #include <linux/inet_lro.h>
 #include <asm/system.h>
-#include <linux/list.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
 static char mv643xx_eth_driver_version[] = "1.4";
@@ -1697,7 +1696,7 @@ static u32 uc_addr_filter_mask(struct net_device *dev)
 		return 0;
 
 	nibbles = 1 << (dev->dev_addr[5] & 0x0f);
-	list_for_each_entry(ha, &dev->uc.list, list) {
+	netdev_for_each_uc_addr(ha, dev) {
 		if (memcmp(dev->dev_addr, ha->addr, 5))
 			return 0;
 		if ((dev->dev_addr[5] ^ ha->addr[5]) & 0xf0)
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 0e260cfbff7b..af9a8647c7e8 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6372,7 +6372,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
 		np->flags |= NIU_FLAGS_MCAST;
 
-	alt_cnt = dev->uc.count;
+	alt_cnt = netdev_uc_count(dev);
 	if (alt_cnt > niu_num_alt_addr(np)) {
 		alt_cnt = 0;
 		np->flags |= NIU_FLAGS_PROMISC;
@@ -6381,7 +6381,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if (alt_cnt) {
 		int index = 0;
 
-		list_for_each_entry(ha, &dev->uc.list, list) {
+		netdev_for_each_uc_addr(ha, dev) {
 			err = niu_set_alt_mac(np, index, ha->addr);
 			if (err)
 				printk(KERN_WARNING PFX "%s: Error %d "
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
index 928eac05b912..d812e9cdb3db 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -83,7 +83,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
 	unsigned int value = 0;
 
 	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
-	    __func__, dev->mc_count, dev->uc.count);
+	    __func__, dev->mc_count, netdev_uc_count(dev));
 
 	if (dev->flags & IFF_PROMISC)
 		value = GMAC_FRAME_FILTER_PR;
@@ -117,7 +117,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
 	}
 
 	/* Handle multiple unicast addresses (perfect filtering)*/
-	if (dev->uc.count > GMAC_MAX_UNICAST_ADDRESSES)
+	if (netdev_uc_count(dev) > GMAC_MAX_UNICAST_ADDRESSES)
 		/* Switch to promiscuous mode is more than 16 addrs
 		   are required */
 		value |= GMAC_FRAME_FILTER_PR;
@@ -125,9 +125,9 @@ static void dwmac1000_set_filter(struct net_device *dev)
 		int reg = 1;
 		struct netdev_hw_addr *ha;
 
-			list_for_each_entry(ha, &dev->uc.list, list) {
-				dwmac1000_set_umac_addr(ioaddr, ha->addr, reg);
-				reg++;
+		netdev_for_each_uc_addr(ha, dev) {
+			dwmac1000_set_umac_addr(ioaddr, ha->addr, reg);
+			reg++;
 		}
 	}
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c708ecc3cb2e..088332a943f7 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -675,6 +675,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	struct virtio_net_ctrl_mac *mac_data;
 	struct dev_addr_list *addr;
 	struct netdev_hw_addr *ha;
+	int uc_count;
 	void *buf;
 	int i;
 
@@ -701,8 +702,9 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 		dev_warn(&dev->dev, "Failed to %sable allmulti mode.\n",
 			 allmulti ? "en" : "dis");
 
+	uc_count = netdev_uc_count(dev);
 	/* MAC filter - use one buffer for both lists */
-	mac_data = buf = kzalloc(((dev->uc.count + dev->mc_count) * ETH_ALEN) +
+	mac_data = buf = kzalloc(((uc_count + dev->mc_count) * ETH_ALEN) +
 				 (2 * sizeof(mac_data->entries)), GFP_ATOMIC);
 	if (!buf) {
 		dev_warn(&dev->dev, "No memory for MAC address buffer\n");
@@ -712,16 +714,16 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	sg_init_table(sg, 2);
 
 	/* Store the unicast list and count in the front of the buffer */
-	mac_data->entries = dev->uc.count;
+	mac_data->entries = uc_count;
 	i = 0;
-	list_for_each_entry(ha, &dev->uc.list, list)
+	netdev_for_each_uc_addr(ha, dev)
 		memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN);
 
 	sg_set_buf(&sg[0], mac_data,
-		   sizeof(mac_data->entries) + (dev->uc.count * ETH_ALEN));
+		   sizeof(mac_data->entries) + (uc_count * ETH_ALEN));
 
 	/* multicast list and count fill the end */
-	mac_data = (void *)&mac_data->macs[dev->uc.count][0];
+	mac_data = (void *)&mac_data->macs[uc_count][0];
 
 	mac_data->entries = dev->mc_count;
 	addr = dev->mc_list;
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index c3258b0dd649..51fde6f2e0b8 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -622,7 +622,7 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	for (dm = dev->mc_list; dm; dm = dm->next)
 		qeth_l2_add_mc(card, dm->da_addr, 0);
 
-	list_for_each_entry(ha, &dev->uc.list, list)
+	netdev_for_each_uc_addr(ha, dev)
 		qeth_l2_add_mc(card, ha->addr, 1);
 
 	spin_unlock_bh(&card->mclock);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b5fb51d0b8b1..93a32a5ca74f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -263,6 +263,11 @@ struct netdev_hw_addr_list {
 	int			count;
 };
 
+#define netdev_uc_count(dev) ((dev)->uc.count)
+#define netdev_uc_empty(dev) ((dev)->uc.count == 0)
+#define netdev_for_each_uc_addr(ha, dev) \
+	list_for_each_entry(ha, &dev->uc.list, list)
+
 struct hh_cache {
 	struct hh_cache *hh_next;	/* Next entry			     */
 	atomic_t	hh_refcnt;	/* number of users                   */
diff --git a/net/core/dev.c b/net/core/dev.c
index 4fad9db417b1..2cba5c521e56 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3665,10 +3665,10 @@ void __dev_set_rx_mode(struct net_device *dev)
 		/* Unicast addresses changes may only happen under the rtnl,
 		 * therefore calling __dev_set_promiscuity here is safe.
 		 */
-		if (dev->uc.count > 0 && !dev->uc_promisc) {
+		if (!netdev_uc_empty(dev) && !dev->uc_promisc) {
 			__dev_set_promiscuity(dev, 1);
 			dev->uc_promisc = 1;
-		} else if (dev->uc.count == 0 && dev->uc_promisc) {
+		} else if (netdev_uc_empty(dev) && dev->uc_promisc) {
 			__dev_set_promiscuity(dev, -1);
 			dev->uc_promisc = 0;
 		}
-- 
cgit v1.2.3


From a13d276f1e49ae0bc4ad18ce8ea3c90656c9e8d4 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 22 Jan 2010 14:22:42 -0800
Subject: iwlwifi: configure missed beacon threshold

Add support to configure missed beacon threshold, by default, if receive
"missed beacon" notification from uCode and has more than 5 consecutive
beacon missed, then perform sensitivity calibration; with this change,
allow user to adjust the missed beacon threshold from debugfs in case
more sensitivity calibration required for better performance in noisy
environment

The default value (=5) should be good enough for the normal condition,
but for very noisy environment, more sensitivity calibration could help
improve the throughput, so by setting the missed beacon threshold to
lower number, user might experience better performance result.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      |  1 +
 drivers/net/wireless/iwlwifi/iwl-commands.h | 25 +++++++++++++---
 drivers/net/wireless/iwlwifi/iwl-debug.h    |  1 +
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  | 46 +++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-dev.h      |  1 +
 drivers/net/wireless/iwlwifi/iwl-rx.c       |  5 ++--
 drivers/net/wireless/iwlwifi/iwl3945-base.c |  1 +
 7 files changed, 74 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 62b6939df52e..e9f786443d1f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3372,6 +3372,7 @@ static int iwl_init_drv(struct iwl_priv *priv)
 
 	priv->iw_mode = NL80211_IFTYPE_STATION;
 	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
+	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
 
 	/* Choose which receivers/antennas to use */
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index cee5fb2187c8..8823d18b9f43 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -3165,13 +3165,30 @@ struct iwl_notif_statistics {
 
 /*
  * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command)
+ *
+ * uCode send MISSED_BEACONS_NOTIFICATION to driver when detect beacon missed
+ * in regardless of how many missed beacons, which mean when driver receive the
+ * notification, inside the command, it can find all the beacons information
+ * which include number of total missed beacons, number of consecutive missed
+ * beacons, number of beacons received and number of beacons expected to
+ * receive.
+ *
+ * If uCode detected consecutive_missed_beacons > 5, it will reset the radio
+ * in order to bring the radio/PHY back to working state; which has no relation
+ * to when driver will perform sensitivity calibration.
+ *
+ * Driver should set it own missed_beacon_threshold to decide when to perform
+ * sensitivity calibration based on number of consecutive missed beacons in
+ * order to improve overall performance, especially in noisy environment.
+ *
  */
-/* if ucode missed CONSECUTIVE_MISSED_BCONS_TH beacons in a row,
- * then this notification will be sent. */
-#define CONSECUTIVE_MISSED_BCONS_TH 20
+
+#define IWL_MISSED_BEACON_THRESHOLD_MIN	(1)
+#define IWL_MISSED_BEACON_THRESHOLD_DEF	(5)
+#define IWL_MISSED_BEACON_THRESHOLD_MAX	IWL_MISSED_BEACON_THRESHOLD_DEF
 
 struct iwl_missed_beacon_notif {
-	__le32 consequtive_missed_beacons;
+	__le32 consecutive_missed_beacons;
 	__le32 total_missed_becons;
 	__le32 num_expected_beacons;
 	__le32 num_recvd_beacons;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 0facaca9b40b..36b558f23325 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -112,6 +112,7 @@ struct iwl_debugfs {
 		struct dentry *file_csr;
 		struct dentry *file_ucode_tracing;
 		struct dentry *file_fh_reg;
+		struct dentry *file_missed_beacon;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index af00ad2afa14..02f80bc21307 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2131,6 +2131,49 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
 	return ret;
 }
 
+static ssize_t iwl_dbgfs_missed_beacon_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char buf[12];
+	const size_t bufsz = sizeof(buf);
+	ssize_t ret;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "%d\n",
+			priv->missed_beacon_threshold);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_missed_beacon_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int missed;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &missed) != 1)
+		return -EINVAL;
+
+	if (missed < IWL_MISSED_BEACON_THRESHOLD_MIN ||
+	    missed > IWL_MISSED_BEACON_THRESHOLD_MAX)
+		priv->missed_beacon_threshold =
+			IWL_MISSED_BEACON_THRESHOLD_DEF;
+	else
+		priv->missed_beacon_threshold = missed;
+
+	return count;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -2148,6 +2191,7 @@ DEBUGFS_WRITE_FILE_OPS(clear_traffic_statistics);
 DEBUGFS_WRITE_FILE_OPS(csr);
 DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing);
 DEBUGFS_READ_FILE_OPS(fh_reg);
+DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon);
 
 /*
  * Create the debugfs files and directories
@@ -2200,6 +2244,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(clear_traffic_statistics, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(csr, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(fh_reg, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(missed_beacon, debug, S_IWUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
@@ -2260,6 +2305,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 			file_clear_traffic_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_csr);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_fh_reg);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_missed_beacon);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index c6310b0b2f12..5e06e666f176 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1053,6 +1053,7 @@ struct iwl_priv {
 #endif
 	/* ucode beacon time */
 	u32 ucode_beacon_time;
+	int missed_beacon_threshold;
 
 	/* we allocate array of iwl4965_channel_info for NIC's valid channels.
 	 *    Access via channel # using indirect index array */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index eb45f8be0746..dc06c7bb0f5c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -499,9 +499,10 @@ void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
 	struct iwl_missed_beacon_notif *missed_beacon;
 
 	missed_beacon = &pkt->u.missed_beacon;
-	if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) {
+	if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
+	    priv->missed_beacon_threshold) {
 		IWL_DEBUG_CALIB(priv, "missed bcn cnsq %d totl %d rcd %d expctd %d\n",
-		    le32_to_cpu(missed_beacon->consequtive_missed_beacons),
+		    le32_to_cpu(missed_beacon->consecutive_missed_beacons),
 		    le32_to_cpu(missed_beacon->total_missed_becons),
 		    le32_to_cpu(missed_beacon->num_recvd_beacons),
 		    le32_to_cpu(missed_beacon->num_expected_beacons));
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index c46f988d0a5b..9c0b6ebbdc59 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3881,6 +3881,7 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	priv->band = IEEE80211_BAND_2GHZ;
 
 	priv->iw_mode = NL80211_IFTYPE_STATION;
+	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
 
 	iwl_reset_qos(priv);
 
-- 
cgit v1.2.3


From afbdd69af0e6a0c40676d4d4b94a0a4414708eaa Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 22 Jan 2010 14:22:43 -0800
Subject: iwlwifi: add function to reset/tune radio if needed

Adding "radio reset" function to help reset and stabilize the radio.

During normal operation, sometime for unknown reason, radio encounter
problem and can not recover by itself; the best way to
recover from it is to reset and re-tune the radio. Currently, there is
no RF reset command available, but since radio will get reset when
switching channel, use internal hw scan request to force radio
reset and get back to normal operation state.

The internal hw scan will only perform passive scan on the first
available channel (not the channel being used) in associated state. The
request should be ignored if already performing scan operation or STA is
not in associated state.

Also include an "internal_scan" debugfs file to help trigger the
internal scan from user mode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c    |  24 +++++
 drivers/net/wireless/iwlwifi/iwl-core.h    |   2 +
 drivers/net/wireless/iwlwifi/iwl-debug.h   |   1 +
 drivers/net/wireless/iwlwifi/iwl-debugfs.c |  24 +++++
 drivers/net/wireless/iwlwifi/iwl-dev.h     |   1 +
 drivers/net/wireless/iwlwifi/iwl-scan.c    | 155 ++++++++++++++++++++++++++---
 6 files changed, 193 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index bb3ed25f8438..645bc133577a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -3343,6 +3343,30 @@ int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display)
 }
 EXPORT_SYMBOL(iwl_dump_fh);
 
+void iwl_force_rf_reset(struct iwl_priv *priv)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (!iwl_is_associated(priv)) {
+		IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n");
+		return;
+	}
+	/*
+	 * There is no easy and better way to force reset the radio,
+	 * the only known method is switching channel which will force to
+	 * reset and tune the radio.
+	 * Use internal short scan (single channel) operation to should
+	 * achieve this objective.
+	 * Driver should reset the radio when number of consecutive missed
+	 * beacon, or any other uCode error condition detected.
+	 */
+	IWL_DEBUG_INFO(priv, "perform radio reset.\n");
+	iwl_internal_short_hw_scan(priv);
+	return;
+}
+EXPORT_SYMBOL(iwl_force_rf_reset);
+
 #ifdef CONFIG_PM
 
 int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 785331a98aa5..6de83d1e1eb8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -494,6 +494,8 @@ void iwl_init_scan_params(struct iwl_priv *priv);
 int iwl_scan_cancel(struct iwl_priv *priv);
 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
 int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
+int iwl_internal_short_hw_scan(struct iwl_priv *priv);
+void iwl_force_rf_reset(struct iwl_priv *priv);
 u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 		       const u8 *ie, int ie_len, int left);
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 36b558f23325..d81b4f39bb1d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -113,6 +113,7 @@ struct iwl_debugfs {
 		struct dentry *file_ucode_tracing;
 		struct dentry *file_fh_reg;
 		struct dentry *file_missed_beacon;
+		struct dentry *file_internal_scan;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 02f80bc21307..4944fdb31ba8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2174,6 +2174,27 @@ static ssize_t iwl_dbgfs_missed_beacon_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_internal_scan_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int scan;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &scan) != 1)
+		return -EINVAL;
+
+	iwl_internal_short_hw_scan(priv);
+
+	return count;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -2192,6 +2213,7 @@ DEBUGFS_WRITE_FILE_OPS(csr);
 DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing);
 DEBUGFS_READ_FILE_OPS(fh_reg);
 DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon);
+DEBUGFS_WRITE_FILE_OPS(internal_scan);
 
 /*
  * Create the debugfs files and directories
@@ -2245,6 +2267,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(csr, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(fh_reg, debug, S_IRUSR);
 	DEBUGFS_ADD_FILE(missed_beacon, debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(internal_scan, debug, S_IWUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
@@ -2306,6 +2329,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_csr);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_fh_reg);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_missed_beacon);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_internal_scan);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 5e06e666f176..502d7a6b0904 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1080,6 +1080,7 @@ struct iwl_priv {
 	void *scan;
 	int scan_bands;
 	struct cfg80211_scan_request *scan_request;
+	bool is_internal_short_scan;
 	u8 scan_tx_ant[IEEE80211_NUM_BANDS];
 	u8 mgmt_tx_ant;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index ceb91f969e45..fd6bafbddfca 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -314,6 +314,72 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_get_passive_dwell_time);
 
+static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
+				     enum ieee80211_band band,
+				     struct iwl_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	const struct iwl_channel_info *ch_info;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int i, added = 0;
+	u16 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	/* only scan single channel, good enough to reset the RF */
+	/* pick the first valid not in-use channel */
+	if (band == IEEE80211_BAND_5GHZ) {
+		for (i = 14; i < priv->channel_count; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+				channel = priv->channel_info[i].channel;
+				ch_info = iwl_get_channel_info(priv,
+					band, channel);
+				if (is_channel_valid(ch_info))
+					break;
+			}
+		}
+	} else {
+		for (i = 0; i < 14; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+					channel =
+						priv->channel_info[i].channel;
+					ch_info = iwl_get_channel_info(priv,
+						band, channel);
+					if (is_channel_valid(ch_info))
+						break;
+			}
+		}
+	}
+	if (channel) {
+		scan_ch->channel = cpu_to_le16(channel);
+		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
 static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 				     enum ieee80211_band band,
 				     u8 is_active, u8 n_probes,
@@ -421,6 +487,7 @@ static int iwl_scan_initiate(struct iwl_priv *priv)
 
 	IWL_DEBUG_INFO(priv, "Starting scan...\n");
 	set_bit(STATUS_SCANNING, &priv->status);
+	priv->is_internal_short_scan = false;
 	priv->scan_start = jiffies;
 	priv->scan_pass_start = priv->scan_start;
 
@@ -488,6 +555,45 @@ out_unlock:
 }
 EXPORT_SYMBOL(iwl_mac_hw_scan);
 
+/*
+ * internal short scan, this function should only been called while associated.
+ * It will reset and tune the radio to prevent possible RF related problem
+ */
+int iwl_internal_short_hw_scan(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	if (!iwl_is_ready_rf(priv)) {
+		ret = -EIO;
+		IWL_DEBUG_SCAN(priv, "not ready or exit pending\n");
+		goto out;
+	}
+	if (test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
+		ret = -EAGAIN;
+		goto out;
+	}
+	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
+		ret = -EAGAIN;
+		goto out;
+	}
+	priv->scan_bands = 0;
+	if (priv->band == IEEE80211_BAND_5GHZ)
+		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
+	else
+		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+
+	IWL_DEBUG_SCAN(priv, "Start internal short scan...\n");
+	set_bit(STATUS_SCANNING, &priv->status);
+	priv->is_internal_short_scan = true;
+	queue_work(priv->workqueue, &priv->request_scan);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(iwl_internal_short_hw_scan);
+
 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
 
 void iwl_bg_scan_check(struct work_struct *data)
@@ -551,7 +657,8 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 	if (WARN_ON(left < ie_len))
 		return len;
 
-	memcpy(pos, ies, ie_len);
+	if (ies)
+		memcpy(pos, ies, ie_len);
 	len += ie_len;
 	left -= ie_len;
 
@@ -654,7 +761,6 @@ static void iwl_bg_request_scan(struct work_struct *data)
 		unsigned long flags;
 
 		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
-
 		spin_lock_irqsave(&priv->lock, flags);
 		interval = priv->beacon_int;
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -672,7 +778,9 @@ static void iwl_bg_request_scan(struct work_struct *data)
 			       scan_suspend_time, interval);
 	}
 
-	if (priv->scan_request->n_ssids) {
+	if (priv->is_internal_short_scan) {
+		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+	} else if (priv->scan_request->n_ssids) {
 		int i, p = 0;
 		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
 		for (i = 0; i < priv->scan_request->n_ssids; i++) {
@@ -753,24 +861,38 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
 	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
 	scan->rx_chain = cpu_to_le16(rx_chain);
-	cmd_len = iwl_fill_probe_req(priv,
-				(struct ieee80211_mgmt *)scan->data,
-				priv->scan_request->ie,
-				priv->scan_request->ie_len,
-				IWL_MAX_SCAN_SIZE - sizeof(*scan));
+	if (!priv->is_internal_short_scan) {
+		cmd_len = iwl_fill_probe_req(priv,
+					(struct ieee80211_mgmt *)scan->data,
+					priv->scan_request->ie,
+					priv->scan_request->ie_len,
+					IWL_MAX_SCAN_SIZE - sizeof(*scan));
+	} else {
+		cmd_len = iwl_fill_probe_req(priv,
+					(struct ieee80211_mgmt *)scan->data,
+					NULL, 0,
+					IWL_MAX_SCAN_SIZE - sizeof(*scan));
 
+	}
 	scan->tx_cmd.len = cpu_to_le16(cmd_len);
-
 	if (iwl_is_monitor_mode(priv))
 		scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 
 	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
 			       RXON_FILTER_BCON_AWARE_MSK);
 
-	scan->channel_count =
-		iwl_get_channels_for_scan(priv, band, is_active, n_probes,
-			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
-
+	if (priv->is_internal_short_scan) {
+		scan->channel_count =
+			iwl_get_single_channel_for_scan(priv, band,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	} else {
+		scan->channel_count =
+			iwl_get_channels_for_scan(priv, band,
+				is_active, n_probes,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	}
 	if (scan->channel_count == 0) {
 		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
 		goto done;
@@ -831,7 +953,12 @@ void iwl_bg_scan_completed(struct work_struct *work)
 
 	cancel_delayed_work(&priv->scan_check);
 
-	ieee80211_scan_completed(priv->hw, false);
+	if (!priv->is_internal_short_scan)
+		ieee80211_scan_completed(priv->hw, false);
+	else {
+		priv->is_internal_short_scan = false;
+		IWL_DEBUG_SCAN(priv, "internal short scan completed\n");
+	}
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
-- 
cgit v1.2.3


From 220575f78fb0b8d2a1c41cd28115d52ae8d132ee Mon Sep 17 00:00:00 2001
From: Henry Zhangh <hongx.c.zhang@intel.com>
Date: Fri, 22 Jan 2010 14:22:44 -0800
Subject: iwlwifi: Fix A band scanning when associated

This patch allows A band to be scanned when driver is associated to AP.
Scan mechanism is that mac80211/cfg80211 requests driver to scan G band
first and then immediately to scan A band. Original code require
driver to wait for 2 seconds after any scan before another scan will be
performed. This caused driver to service G band scan request from
mac80211/cfg80211 but deny the A band scan request.

Signed-off-by: Henry Zhangh <hongx.c.zhang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-dev.h  |  1 -
 drivers/net/wireless/iwlwifi/iwl-scan.c | 17 ++---------------
 2 files changed, 2 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 502d7a6b0904..42cf1810b451 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1072,7 +1072,6 @@ struct iwl_priv {
 	struct iwl_calib_result calib_results[IWL_CALIB_MAX];
 
 	/* Scan related variables */
-	unsigned long last_scan_jiffies;
 	unsigned long next_scan_jiffies;
 	unsigned long scan_start;
 	unsigned long scan_pass_start;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index fd6bafbddfca..07fabbbfd567 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -192,18 +192,15 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 	IWL_DEBUG_SCAN(priv, "Scan ch.res: "
 		       "%d [802.11%s] "
 		       "(TSF: 0x%08X:%08X) - %d "
-		       "elapsed=%lu usec (%dms since last)\n",
+		       "elapsed=%lu usec\n",
 		       notif->channel,
 		       notif->band ? "bg" : "a",
 		       le32_to_cpu(notif->tsf_high),
 		       le32_to_cpu(notif->tsf_low),
 		       le32_to_cpu(notif->statistics[0]),
-		       le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
-		       jiffies_to_msecs(elapsed_jiffies
-					(priv->last_scan_jiffies, jiffies)));
+		       le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
 #endif
 
-	priv->last_scan_jiffies = jiffies;
 	priv->next_scan_jiffies = 0;
 }
 
@@ -250,7 +247,6 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 			goto reschedule;
 	}
 
-	priv->last_scan_jiffies = jiffies;
 	priv->next_scan_jiffies = 0;
 	IWL_DEBUG_INFO(priv, "Setting scan to off\n");
 
@@ -528,15 +524,6 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 		goto out_unlock;
 	}
 
-	/* if we just finished scan ask for delay */
-	if (iwl_is_associated(priv) && priv->last_scan_jiffies &&
-	    time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) {
-		IWL_DEBUG_SCAN(priv, "scan rejected: within previous scan period\n");
-		queue_work(priv->workqueue, &priv->scan_completed);
-		ret = 0;
-		goto out_unlock;
-	}
-
 	priv->scan_bands = 0;
 	for (i = 0; i < req->n_channels; i++)
 		priv->scan_bands |= BIT(req->channels[i]->band);
-- 
cgit v1.2.3


From d4d59e88cb746165c6fe33eacb6f582d525c6ef1 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 22 Jan 2010 14:22:45 -0800
Subject: iwlwifi: Logic to control how frequent radio should be reset if
 needed

Add additional logic for internal scan routine to control how
frequent this function should be performed.

The intent of this function is to reset/re-tune the radio and bring the
RF/PHY back to normal state, it does not make sense calling it too
frequent,
if reset the radio can not bring it back to normal state, it indicate
there are other reason to cause the radio not operate correctly.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-dev.h  |  1 +
 drivers/net/wireless/iwlwifi/iwl-scan.c | 18 ++++++++++++++++--
 2 files changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 42cf1810b451..86d38ae2ec7e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1076,6 +1076,7 @@ struct iwl_priv {
 	unsigned long scan_start;
 	unsigned long scan_pass_start;
 	unsigned long scan_start_tsf;
+	unsigned long last_internal_scan_jiffies;
 	void *scan;
 	int scan_bands;
 	struct cfg80211_scan_request *scan_request;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 07fabbbfd567..08faafae8497 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -201,7 +201,8 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 		       le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
 #endif
 
-	priv->next_scan_jiffies = 0;
+	if (!priv->is_internal_short_scan)
+		priv->next_scan_jiffies = 0;
 }
 
 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
@@ -247,7 +248,11 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 			goto reschedule;
 	}
 
-	priv->next_scan_jiffies = 0;
+	if (!priv->is_internal_short_scan)
+		priv->next_scan_jiffies = 0;
+	else
+		priv->last_internal_scan_jiffies = jiffies;
+
 	IWL_DEBUG_INFO(priv, "Setting scan to off\n");
 
 	clear_bit(STATUS_SCANNING, &priv->status);
@@ -546,6 +551,8 @@ EXPORT_SYMBOL(iwl_mac_hw_scan);
  * internal short scan, this function should only been called while associated.
  * It will reset and tune the radio to prevent possible RF related problem
  */
+#define IWL_DELAY_NEXT_INTERNAL_SCAN (HZ*1)
+
 int iwl_internal_short_hw_scan(struct iwl_priv *priv)
 {
 	int ret = 0;
@@ -565,6 +572,13 @@ int iwl_internal_short_hw_scan(struct iwl_priv *priv)
 		ret = -EAGAIN;
 		goto out;
 	}
+	if (priv->last_internal_scan_jiffies &&
+	    time_after(priv->last_internal_scan_jiffies +
+		       IWL_DELAY_NEXT_INTERNAL_SCAN, jiffies)) {
+		IWL_DEBUG_SCAN(priv, "internal scan rejected\n");
+		goto out;
+	}
+
 	priv->scan_bands = 0;
 	if (priv->band == IEEE80211_BAND_5GHZ)
 		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
-- 
cgit v1.2.3


From 3e4fb5faefb57824f2e42305b3d5907845af978c Mon Sep 17 00:00:00 2001
From: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com>
Date: Fri, 22 Jan 2010 14:22:46 -0800
Subject: iwlwifi: Tune radio to prevent unexpected behavior

We have seen the throughput dropped due to external noisy environment
and the radio is out of tune.  There are lot of plcp errors indicating
this condition. Eventually the station can get de-authenticated by the
Access Point.  By resetting and tuning the radio, the plcp errors are
reduced or eliminated and the throughput starts to rise.

To prevent unexpected behavior such as drop in throughput or deauthentication,
- The change provides the driver feature to monitor and tune the radio base on
the statistics notification from the uCode.
- It also allows the setting of the plcp error rate threshold via
the plcp_delta under debugfs interface.

Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c    |  2 ++
 drivers/net/wireless/iwlwifi/iwl-3945.c    |  2 ++
 drivers/net/wireless/iwlwifi/iwl-4965.c    |  1 +
 drivers/net/wireless/iwlwifi/iwl-5000.c    |  7 ++++
 drivers/net/wireless/iwlwifi/iwl-6000.c    |  6 ++++
 drivers/net/wireless/iwlwifi/iwl-core.h    |  3 ++
 drivers/net/wireless/iwlwifi/iwl-debug.h   |  1 +
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 44 ++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-dev.h     | 12 +++++++
 drivers/net/wireless/iwlwifi/iwl-rx.c      | 54 ++++++++++++++++++++++++++++++
 10 files changed, 132 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index d5c6edbbc95a..85162e2c35d9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -175,6 +175,7 @@ struct iwl_cfg iwl1000_bgn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl1000_bg_cfg = {
@@ -201,6 +202,7 @@ struct iwl_cfg iwl1000_bg_cfg = {
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 6472910b72d4..764479f74c8b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2830,6 +2830,7 @@ static struct iwl_cfg iwl3945_bg_cfg = {
 	.ht_greenfield_support = false,
 	.led_compensation = 64,
 	.broken_powersave = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2847,6 +2848,7 @@ static struct iwl_cfg iwl3945_abg_cfg = {
 	.ht_greenfield_support = false,
 	.led_compensation = 64,
 	.broken_powersave = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct pci_device_id iwl3945_hw_card_ids[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 8159a0fcf5a8..c36fef99b4b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2239,6 +2239,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.broken_powersave = true,
 	.led_compensation = 61,
 	.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 /* Module firmware */
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index aab6cf23c2bd..cbbc0e4f2c76 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1603,6 +1603,7 @@ struct iwl_cfg iwl5300_agn_cfg = {
 	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl5100_bgn_cfg = {
@@ -1627,6 +1628,7 @@ struct iwl_cfg iwl5100_bgn_cfg = {
 	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
@@ -1649,6 +1651,7 @@ struct iwl_cfg iwl5100_abg_cfg = {
 	.use_bsm = false,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
@@ -1673,6 +1676,7 @@ struct iwl_cfg iwl5100_agn_cfg = {
 	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -1697,6 +1701,7 @@ struct iwl_cfg iwl5350_agn_cfg = {
 	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl5150_agn_cfg = {
@@ -1721,6 +1726,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
 	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl5150_abg_cfg = {
@@ -1743,6 +1749,7 @@ struct iwl_cfg iwl5150_abg_cfg = {
 	.use_bsm = false,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 4dab7f12e725..b191c634ad92 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -308,6 +308,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl6000i_2abg_cfg = {
@@ -337,6 +338,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl6000i_2bg_cfg = {
@@ -366,6 +368,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -396,6 +399,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl6050_2abg_cfg = {
@@ -425,6 +429,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -455,6 +460,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 6de83d1e1eb8..661918347d48 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -232,6 +232,8 @@ struct iwl_mod_params {
  * @adv_thermal_throttle: support advance thermal throttle
  * @support_ct_kill_exit: support ct kill exit condition
  * @support_wimax_coexist: support wimax/wifi co-exist
+ * @plcp_delta_threshold: plcp error rate threshold used to trigger
+ *	radio tuning when there is a high receiving plcp error rate
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -288,6 +290,7 @@ struct iwl_cfg {
 	bool adv_thermal_throttle;
 	bool support_ct_kill_exit;
 	const bool support_wimax_coexist;
+	u8 plcp_delta_threshold;
 };
 
 /***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index d81b4f39bb1d..aff1dc0756fc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -114,6 +114,7 @@ struct iwl_debugfs {
 		struct dentry *file_fh_reg;
 		struct dentry *file_missed_beacon;
 		struct dentry *file_internal_scan;
+		struct dentry *file_plcp_delta;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 4944fdb31ba8..3f9c03998491 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2195,6 +2195,47 @@ static ssize_t iwl_dbgfs_internal_scan_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_plcp_delta_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	char buf[12];
+	const size_t bufsz = sizeof(buf);
+	ssize_t ret;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "%u\n",
+			priv->cfg->plcp_delta_threshold);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_plcp_delta_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int plcp;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &plcp) != 1)
+		return -EINVAL;
+	if ((plcp <= IWL_MAX_PLCP_ERR_THRESHOLD_MIN) ||
+		(plcp > IWL_MAX_PLCP_ERR_THRESHOLD_MAX))
+		priv->cfg->plcp_delta_threshold =
+			IWL_MAX_PLCP_ERR_THRESHOLD_DEF;
+	else
+		priv->cfg->plcp_delta_threshold = plcp;
+	return count;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -2214,6 +2255,7 @@ DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing);
 DEBUGFS_READ_FILE_OPS(fh_reg);
 DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon);
 DEBUGFS_WRITE_FILE_OPS(internal_scan);
+DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta);
 
 /*
  * Create the debugfs files and directories
@@ -2268,6 +2310,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(fh_reg, debug, S_IRUSR);
 	DEBUGFS_ADD_FILE(missed_beacon, debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(internal_scan, debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(plcp_delta, debug, S_IWUSR | S_IRUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
@@ -2330,6 +2373,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_fh_reg);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_missed_beacon);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_internal_scan);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_plcp_delta);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 86d38ae2ec7e..a1f3ecb69ed0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1026,6 +1026,15 @@ struct iwl_event_log {
 #define IWL_HOST_INT_CALIB_TIMEOUT_DEF	(0x10)
 #define IWL_HOST_INT_CALIB_TIMEOUT_MIN	(0x0)
 
+/*
+ * This is the threshold value of plcp error rate per 100mSecs.  It is
+ * used to set and check for the validity of plcp_delta.
+ */
+#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN	(0)
+#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF	(50)
+#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF	(100)
+#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX	(255)
+
 struct iwl_priv {
 
 	/* ieee device used by generic ieee processing code */
@@ -1055,6 +1064,9 @@ struct iwl_priv {
 	u32 ucode_beacon_time;
 	int missed_beacon_threshold;
 
+	/* storing the jiffies when the plcp error rate is received */
+	unsigned long plcp_jiffies;
+
 	/* we allocate array of iwl4965_channel_info for NIC's valid channels.
 	 *    Access via channel # using indirect index array */
 	struct iwl_channel_info *channel_info;	/* channel info array */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index dc06c7bb0f5c..ea309f42a78a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -602,11 +602,15 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
 
 #define REG_RECALIB_PERIOD (60)
 
+#define PLCP_MSG "plcp_err exceeded %u, %u, %u, %u, %u, %d, %u mSecs\n"
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb)
 {
 	int change;
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	int combined_plcp_delta;
+	unsigned int plcp_msec;
+	unsigned long plcp_received_jiffies;
 
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics),
@@ -621,6 +625,56 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 #ifdef CONFIG_IWLWIFI_DEBUG
 	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
 #endif
+	/*
+	 * check for plcp_err and trigger radio reset if it exceeds
+	 * the plcp error threshold plcp_delta.
+	 */
+	plcp_received_jiffies = jiffies;
+	plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
+					(long) priv->plcp_jiffies);
+	priv->plcp_jiffies = plcp_received_jiffies;
+	/*
+	 * check to make sure plcp_msec is not 0 to prevent division
+	 * by zero.
+	 */
+	if (plcp_msec) {
+		combined_plcp_delta =
+			(le32_to_cpu(pkt->u.stats.rx.ofdm.plcp_err) -
+			le32_to_cpu(priv->statistics.rx.ofdm.plcp_err)) +
+			(le32_to_cpu(pkt->u.stats.rx.ofdm_ht.plcp_err) -
+			le32_to_cpu(priv->statistics.rx.ofdm_ht.plcp_err));
+
+		if ((combined_plcp_delta > 0) &&
+			((combined_plcp_delta * 100) / plcp_msec) >
+			priv->cfg->plcp_delta_threshold) {
+			/*
+			 * if plcp_err exceed the threshold, the following
+			 * data is printed in csv format:
+			 *    Text: plcp_err exceeded %d,
+			 *    Received ofdm.plcp_err,
+			 *    Current ofdm.plcp_err,
+			 *    Received ofdm_ht.plcp_err,
+			 *    Current ofdm_ht.plcp_err,
+			 *    combined_plcp_delta,
+			 *    plcp_msec
+			 */
+			IWL_DEBUG_RADIO(priv, PLCP_MSG,
+				priv->cfg->plcp_delta_threshold,
+				le32_to_cpu(pkt->u.stats.rx.ofdm.plcp_err),
+				le32_to_cpu(priv->statistics.rx.ofdm.plcp_err),
+				le32_to_cpu(pkt->u.stats.rx.ofdm_ht.plcp_err),
+				le32_to_cpu(
+					priv->statistics.rx.ofdm_ht.plcp_err),
+				combined_plcp_delta, plcp_msec);
+
+			/*
+			 * Reset the RF radio due to the high plcp
+			 * error rate
+			 */
+			iwl_force_rf_reset(priv);
+		}
+	}
+
 	memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
 
 	set_bit(STATUS_STATISTICS, &priv->status);
-- 
cgit v1.2.3


From 07f33f92e8e1e6ed2ec9d4de048142e7a1d96856 Mon Sep 17 00:00:00 2001
From: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Date: Fri, 22 Jan 2010 14:22:47 -0800
Subject: iwlwifi: enable DC calibration

From: Abhijeet Kolekar <abhijeet.kolekar@intel.com>

For 6X50 DC calibration needs to be initialized
else uCode will run an endless loop.
Enbale DC calibration in hw config.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-6000.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index b191c634ad92..f89ef4aa78fd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -158,11 +158,25 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
 	/* Set initial sensitivity parameters */
 	/* Set initial calibration set */
 	priv->hw_params.sens = &iwl6000_sensitivity;
-	priv->hw_params.calib_init_cfg =
+	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+	case CSR_HW_REV_TYPE_6x50:
+		priv->hw_params.calib_init_cfg =
 			BIT(IWL_CALIB_XTAL)		|
+			BIT(IWL_CALIB_DC)		|
 			BIT(IWL_CALIB_LO)		|
 			BIT(IWL_CALIB_TX_IQ) 		|
 			BIT(IWL_CALIB_BASE_BAND);
+
+		break;
+	default:
+		priv->hw_params.calib_init_cfg =
+			BIT(IWL_CALIB_XTAL)		|
+			BIT(IWL_CALIB_LO)		|
+			BIT(IWL_CALIB_TX_IQ) 		|
+			BIT(IWL_CALIB_BASE_BAND);
+		break;
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 1fa97aaeb7fb5111f69abfdb8db656ce19e4951e Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 22 Jan 2010 14:22:48 -0800
Subject: iwlwifi: cleanup station adding code

The work done when a station is added is very similar whether the station
is added synchronously or asynchronously. Centralize this work. At the same
time increase the status flags being checked for when the command returns
with accompanying debug messages. Also increase checking when setting the
"ucode active" state with accompanying debugging.

This work is done in preparation for station notification support.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-sta.c | 114 ++++++++++++++++++++++-----------
 1 file changed, 78 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 8afa39b4b488..842f15653238 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -80,46 +80,103 @@ int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 }
 EXPORT_SYMBOL(iwl_get_ra_sta_id);
 
+/* priv->sta_lock must be held */
 static void iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
 
 	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE))
-		IWL_ERR(priv, "ACTIVATE a non DRIVER active station %d\n",
-			sta_id);
+		IWL_ERR(priv, "ACTIVATE a non DRIVER active station id %u addr %pM\n",
+			sta_id, priv->stations[sta_id].sta.sta.addr);
 
-	priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE;
-	IWL_DEBUG_ASSOC(priv, "Added STA to Ucode: %pM\n",
-			priv->stations[sta_id].sta.sta.addr);
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
+	if (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) {
+		IWL_DEBUG_ASSOC(priv,
+				"STA id %u addr %pM already present in uCode (according to driver)\n",
+				sta_id, priv->stations[sta_id].sta.sta.addr);
+	} else {
+		priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE;
+		IWL_DEBUG_ASSOC(priv, "Added STA id %u addr %pM to uCode\n",
+				sta_id, priv->stations[sta_id].sta.sta.addr);
+	}
 }
 
-static void iwl_add_sta_callback(struct iwl_priv *priv,
-				 struct iwl_device_cmd *cmd,
-				 struct iwl_rx_packet *pkt)
+static void iwl_process_add_sta_resp(struct iwl_priv *priv,
+				     struct iwl_addsta_cmd *addsta,
+				     struct iwl_rx_packet *pkt,
+				     bool sync)
 {
-	struct iwl_addsta_cmd *addsta =
-		(struct iwl_addsta_cmd *)cmd->cmd.payload;
 	u8 sta_id = addsta->sta.sta_id;
+	unsigned long flags;
 
 	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
-			  pkt->hdr.flags);
+			pkt->hdr.flags);
 		return;
 	}
 
+	IWL_DEBUG_INFO(priv, "Processing response for adding station %u\n",
+		       sta_id);
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+
 	switch (pkt->u.add_sta.status) {
 	case ADD_STA_SUCCESS_MSK:
+		IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n");
 		iwl_sta_ucode_activate(priv, sta_id);
-		 /* fall through */
+		break;
+	case ADD_STA_NO_ROOM_IN_TABLE:
+		IWL_ERR(priv, "Adding station %d failed, no room in table.\n",
+			sta_id);
+		break;
+	case ADD_STA_NO_BLOCK_ACK_RESOURCE:
+		IWL_ERR(priv, "Adding station %d failed, no block ack resource.\n",
+			sta_id);
+		break;
+	case ADD_STA_MODIFY_NON_EXIST_STA:
+		IWL_ERR(priv, "Attempting to modify non-existing station %d \n",
+			sta_id);
+		break;
 	default:
-		IWL_DEBUG_HC(priv, "Received REPLY_ADD_STA:(0x%08X)\n",
-			     pkt->u.add_sta.status);
+		IWL_DEBUG_ASSOC(priv, "Received REPLY_ADD_STA:(0x%08X)\n",
+				pkt->u.add_sta.status);
 		break;
 	}
+
+	IWL_DEBUG_INFO(priv, "%s station id %u addr %pM\n",
+		       priv->stations[sta_id].sta.mode ==
+		       STA_CONTROL_MODIFY_MSK ?  "Modified" : "Added",
+		       sta_id, priv->stations[sta_id].sta.sta.addr);
+
+	/*
+	 * XXX: The MAC address in the command buffer is often changed from
+	 * the original sent to the device. That is, the MAC address
+	 * written to the command buffer often is not the same MAC adress
+	 * read from the command buffer when the command returns. This
+	 * issue has not yet been resolved and this debugging is left to
+	 * observe the problem.
+	 */
+	IWL_DEBUG_INFO(priv, "%s station according to cmd buffer %pM\n",
+		       priv->stations[sta_id].sta.mode ==
+		       STA_CONTROL_MODIFY_MSK ? "Modified" : "Added",
+		       addsta->sta.addr);
+
+	/*
+	 * Determine if we wanted to modify or add a station,
+	 * if adding a station succeeded we have some more initialization
+	 * to do when using station notification. TODO
+	 */
+
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+}
+
+static void iwl_add_sta_callback(struct iwl_priv *priv,
+				 struct iwl_device_cmd *cmd,
+				 struct iwl_rx_packet *pkt)
+{
+	struct iwl_addsta_cmd *addsta =
+		(struct iwl_addsta_cmd *)cmd->cmd.payload;
+
+	iwl_process_add_sta_resp(priv, addsta, pkt, false);
+
 }
 
 int iwl_send_add_sta(struct iwl_priv *priv,
@@ -145,24 +202,9 @@ int iwl_send_add_sta(struct iwl_priv *priv,
 	if (ret || (flags & CMD_ASYNC))
 		return ret;
 
-	pkt = (struct iwl_rx_packet *)cmd.reply_page;
-	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
-			  pkt->hdr.flags);
-		ret = -EIO;
-	}
-
 	if (ret == 0) {
-		switch (pkt->u.add_sta.status) {
-		case ADD_STA_SUCCESS_MSK:
-			iwl_sta_ucode_activate(priv, sta->sta.sta_id);
-			IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n");
-			break;
-		default:
-			ret = -EIO;
-			IWL_WARN(priv, "REPLY_ADD_STA failed\n");
-			break;
-		}
+		pkt = (struct iwl_rx_packet *)cmd.reply_page;
+		iwl_process_add_sta_resp(priv, sta, pkt, true);
 	}
 	iwl_free_pages(priv, cmd.reply_page);
 
-- 
cgit v1.2.3


From 3459ab5a1c92eaf8b76e9fa1b6ca529cf83066f3 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 22 Jan 2010 14:22:49 -0800
Subject: iwlwifi: make broadcast station addition generic

Add function pointer for broadcast station addition so that we can call it
in from iwlcore at a later time. We only distinguish between iwlagn and
iwl3945 broadcast station addition. For the iwl3945 station addition we add
that function to iwlcore since that is where most station functionality
resides, making it part of iwl3945 will require significant code
reorganization that will dilute station management functionality. This
seems to be an efficient solution.

It may seem as though we are removing error checking when adding the 3945
broadcast station but this error checking was never really necessary since
the function returns the station id and the broadcast station id is always
set.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c |  1 +
 drivers/net/wireless/iwlwifi/iwl-3945.c |  7 ++-----
 drivers/net/wireless/iwlwifi/iwl-4965.c |  1 +
 drivers/net/wireless/iwlwifi/iwl-5000.c |  2 ++
 drivers/net/wireless/iwlwifi/iwl-6000.c |  1 +
 drivers/net/wireless/iwlwifi/iwl-agn.c  |  3 ++-
 drivers/net/wireless/iwlwifi/iwl-core.h |  2 ++
 drivers/net/wireless/iwlwifi/iwl-sta.c  | 11 +++++++++++
 drivers/net/wireless/iwlwifi/iwl-sta.h  |  1 +
 9 files changed, 23 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 85162e2c35d9..4281999cfaaa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -140,6 +140,7 @@ static struct iwl_lib_ops iwl1000_lib = {
 		.temperature = iwl5000_temperature,
 		.set_ct_kill = iwl1000_set_ct_threshold,
 	 },
+	.add_bcast_station = iwl_add_bcast_station,
 };
 
 static const struct iwl_ops iwl1000_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 764479f74c8b..57194bbd2762 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -1951,11 +1951,7 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
 	}
 
 	/* Add the broadcast address so we can send broadcast frames */
-	if (iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL) ==
-	    IWL_INVALID_STATION) {
-		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
-		return -EIO;
-	}
+	priv->cfg->ops->lib->add_bcast_station(priv);
 
 	/* If we have set the ASSOC_MSK and we are in BSS mode then
 	 * add the IWL_AP_ID to the station rate table */
@@ -2796,6 +2792,7 @@ static struct iwl_lib_ops iwl3945_lib = {
 	.post_associate = iwl3945_post_associate,
 	.isr = iwl_isr_legacy,
 	.config_ap = iwl3945_config_ap,
+	.add_bcast_station = iwl3945_add_bcast_station,
 };
 
 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index c36fef99b4b0..aebe8c51d3e1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2206,6 +2206,7 @@ static struct iwl_lib_ops iwl4965_lib = {
 		.temperature = iwl4965_temperature_calib,
 		.set_ct_kill = iwl4965_set_ct_threshold,
 	},
+	.add_bcast_station = iwl_add_bcast_station,
 };
 
 static const struct iwl_ops iwl4965_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index cbbc0e4f2c76..6027e2a658d1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1503,6 +1503,7 @@ struct iwl_lib_ops iwl5000_lib = {
 		.temperature = iwl5000_temperature,
 		.set_ct_kill = iwl5000_set_ct_threshold,
 	 },
+	.add_bcast_station = iwl_add_bcast_station,
 };
 
 static struct iwl_lib_ops iwl5150_lib = {
@@ -1556,6 +1557,7 @@ static struct iwl_lib_ops iwl5150_lib = {
 		.temperature = iwl5150_temperature,
 		.set_ct_kill = iwl5150_set_ct_threshold,
 	 },
+	.add_bcast_station = iwl_add_bcast_station,
 };
 
 static const struct iwl_ops iwl5000_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index f89ef4aa78fd..81e03e33ec73 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -266,6 +266,7 @@ static struct iwl_lib_ops iwl6000_lib = {
 		.temperature = iwl5000_temperature,
 		.set_ct_kill = iwl6000_set_ct_threshold,
 	 },
+	.add_bcast_station = iwl_add_bcast_station,
 };
 
 static const struct iwl_ops iwl6000_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index e9f786443d1f..bed5dda8d6b2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -203,7 +203,8 @@ int iwl_commit_rxon(struct iwl_priv *priv)
 	priv->start_calib = 0;
 
 	/* Add the broadcast address so we can send broadcast frames */
-	iwl_add_bcast_station(priv);
+	priv->cfg->ops->lib->add_bcast_station(priv);
+
 
 	/* If we have set the ASSOC_MSK and we are in BSS mode then
 	 * add the IWL_AP_ID to the station rate table */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 661918347d48..e14e32976b80 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -188,6 +188,8 @@ struct iwl_lib_ops {
 
 	/* temperature */
 	struct iwl_temp_ops temp_ops;
+	/* station management */
+	void (*add_bcast_station)(struct iwl_priv *priv);
 };
 
 struct iwl_led_ops {
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 842f15653238..fcac73cf82bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1127,6 +1127,7 @@ static void iwl_sta_init_bcast_lq(struct iwl_priv *priv)
  */
 void iwl_add_bcast_station(struct iwl_priv *priv)
 {
+	IWL_DEBUG_INFO(priv, "Adding broadcast station to station table\n");
 	iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL);
 
 	/* Set up default rate scaling table in device's station table */
@@ -1134,6 +1135,16 @@ void iwl_add_bcast_station(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_add_bcast_station);
 
+/**
+ * iwl3945_add_bcast_station - add broadcast station into station table.
+ */
+void iwl3945_add_bcast_station(struct iwl_priv *priv)
+{
+	IWL_DEBUG_INFO(priv, "Adding broadcast station to station table\n");
+	iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL);
+}
+EXPORT_SYMBOL(iwl3945_add_bcast_station);
+
 /**
  * iwl_get_sta_id - Find station's index within station table
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 8c6850d03e47..2dc35fe28f56 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -53,6 +53,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 
 int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_add_bcast_station(struct iwl_priv *priv);
+void iwl3945_add_bcast_station(struct iwl_priv *priv);
 int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_clear_stations_table(struct iwl_priv *priv);
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv);
-- 
cgit v1.2.3


From dab1c161fed18eb6b3472bdbfd827264caae097f Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 22 Jan 2010 14:22:50 -0800
Subject: iwlwifi: bit field description for BT Config command

Give better bit filed define and description for flag parameter
in REPLY_BT_CONFIG command:

flags:
 bit 0 - 1: BT channel announcement enabled
         0: disable
 bit 1 - 1: priority of BT device enabled
         0: disable
 bit 2 - 1: BT 2 wire support enabled
         0: disable

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h | 15 ++++++++++++---
 drivers/net/wireless/iwlwifi/iwl-core.c     |  2 +-
 2 files changed, 13 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 8823d18b9f43..ce538946f3ff 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2247,10 +2247,19 @@ struct iwl_link_quality_cmd {
 	__le32 reserved2;
 } __attribute__ ((packed));
 
+/*
+ * BT configuration enable flags:
+ *   bit 0 - 1: BT channel announcement enabled
+ *           0: disable
+ *   bit 1 - 1: priority of BT device enabled
+ *           0: disable
+ *   bit 2 - 1: BT 2 wire support enabled
+ *           0: disable
+ */
 #define BT_COEX_DISABLE (0x0)
-#define BT_COEX_MODE_2W (0x1)
-#define BT_COEX_MODE_3W (0x2)
-#define BT_COEX_MODE_4W (0x3)
+#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0)
+#define BT_ENABLE_PRIORITY	   BIT(1)
+#define BT_ENABLE_2_WIRE	   BIT(2)
 
 #define BT_LEAD_TIME_MIN (0x0)
 #define BT_LEAD_TIME_DEF (0x1E)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 645bc133577a..d625aa8fe7a2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1977,7 +1977,7 @@ EXPORT_SYMBOL(iwl_isr_legacy);
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
 	struct iwl_bt_cmd bt_cmd = {
-		.flags = BT_COEX_MODE_4W,
+		.flags = BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY,
 		.lead_time = BT_LEAD_TIME_DEF,
 		.max_kill = BT_MAX_KILL_DEF,
 		.kill_ack_mask = 0,
-- 
cgit v1.2.3


From 06702a735eacf8679e9ff0d49eb3c989bc6b96ce Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 22 Jan 2010 14:22:51 -0800
Subject: iwlwifi: module parameter to enable/disable bt co-exist

Adding "bt_coex_active" module parameter for iwlcore to enable/disable
BT coexist; if bt_coex_active is true (default), uCode will do kill/defer
every time the priority line is asserted (BT is sending signals on the
priority line in the PCIx). By disable the bt_coex_active, uCode will
ignore the BT activity and perform the normal operation.

Users might experience transmit issue on some platform due to this
WiFi/BT co-exist problem. The possible symptoms are: NetworkManager and
other similar programs can scan and find all the available APs, but will
timeout and unable to associate with any of the APs; no out-going frames
can be found with wireless sniffer tools.

On those platforms, WiFi communication can be restored by set "bt_coex_active"
module parameter to "false"

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h |  3 +++
 drivers/net/wireless/iwlwifi/iwl-core.c     | 29 ++++++++++++++++++++++++++++-
 2 files changed, 31 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index ce538946f3ff..c2f31eb26bef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2261,6 +2261,9 @@ struct iwl_link_quality_cmd {
 #define BT_ENABLE_PRIORITY	   BIT(1)
 #define BT_ENABLE_2_WIRE	   BIT(2)
 
+#define BT_COEX_DISABLE (0x0)
+#define BT_COEX_ENABLE  (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY)
+
 #define BT_LEAD_TIME_MIN (0x0)
 #define BT_LEAD_TIME_DEF (0x1E)
 #define BT_LEAD_TIME_MAX (0xFF)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index d625aa8fe7a2..1cfabd6be0b8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -47,6 +47,26 @@ MODULE_VERSION(IWLWIFI_VERSION);
 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
 MODULE_LICENSE("GPL");
 
+/*
+ * set bt_coex_active to true, uCode will do kill/defer
+ * every time the priority line is asserted (BT is sending signals on the
+ * priority line in the PCIx).
+ * set bt_coex_active to false, uCode will ignore the BT activity and
+ * perform the normal operation
+ *
+ * User might experience transmit issue on some platform due to WiFi/BT
+ * co-exist problem. The possible behaviors are:
+ *   Able to scan and finding all the available AP
+ *   Not able to associate with any AP
+ * On those platforms, WiFi communication can be restored by set
+ * "bt_coex_active" module parameter to "false"
+ *
+ * default: bt_coex_active = true (BT_COEX_ENABLE)
+ */
+static bool bt_coex_active = true;
+module_param(bt_coex_active, bool, S_IRUGO);
+MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist\n");
+
 static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = {
 	{COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP,
 	 0, COEX_UNASSOC_IDLE_FLAGS},
@@ -1977,13 +1997,20 @@ EXPORT_SYMBOL(iwl_isr_legacy);
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
 	struct iwl_bt_cmd bt_cmd = {
-		.flags = BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY,
 		.lead_time = BT_LEAD_TIME_DEF,
 		.max_kill = BT_MAX_KILL_DEF,
 		.kill_ack_mask = 0,
 		.kill_cts_mask = 0,
 	};
 
+	if (!bt_coex_active)
+		bt_cmd.flags = BT_COEX_DISABLE;
+	else
+		bt_cmd.flags = BT_COEX_ENABLE;
+
+	IWL_DEBUG_INFO(priv, "BT coex %s\n",
+		(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
+
 	return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
 				sizeof(struct iwl_bt_cmd), &bt_cmd);
 }
-- 
cgit v1.2.3


From 1d8c4ae9169ee8d8ca7fb84a7b6bb4c7a4d49397 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 22 Jan 2010 14:22:52 -0800
Subject: iwlwifi: is no longer experimental

It really hasn't been for a long time, not sure
why this stuck around.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index b16b06c2031f..e44e572acb92 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,6 +1,6 @@
 config IWLWIFI
 	tristate "Intel Wireless Wifi"
-	depends on PCI && MAC80211 && EXPERIMENTAL
+	depends on PCI && MAC80211
 	select FW_LOADER
 
 config IWLWIFI_SPECTRUM_MEASUREMENT
-- 
cgit v1.2.3


From 158bea07c6017fa67bc0c64815ce5c3a998083dc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 22 Jan 2010 14:22:53 -0800
Subject: iwlwifi: reorder device setup

It is better to first notify cfg80211 about the hw
rfkill state (so the rfkill device that will be
registered won't have the wrong state while being
registered), and the power/tt variable init can
(and probably should) also be done first.

Also rename iwl_setup_mac to
iwl_mac_setup_register to better describe what it
really does.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index bed5dda8d6b2..1853064855cd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2608,7 +2608,7 @@ void iwl_post_associate(struct iwl_priv *priv)
  * Not a mac80211 entry point function, but it fits in with all the
  * other mac80211 functions grouped here.
  */
-static int iwl_setup_mac(struct iwl_priv *priv)
+static int iwl_mac_setup_register(struct iwl_priv *priv)
 {
 	int ret;
 	struct ieee80211_hw *hw = priv->hw;
@@ -3625,9 +3625,9 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	iwl_setup_deferred_work(priv);
 	iwl_setup_rx_handlers(priv);
 
-	/**********************************
-	 * 8. Setup and register mac80211
-	 **********************************/
+	/*********************************************
+	 * 8. Enable interrupts and read RFKILL state
+	 *********************************************/
 
 	/* enable interrupts if needed: hw bug w/a */
 	pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
@@ -3638,14 +3638,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	iwl_enable_interrupts(priv);
 
-	err = iwl_setup_mac(priv);
-	if (err)
-		goto out_remove_sysfs;
-
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -3657,6 +3649,18 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	iwl_power_initialize(priv);
 	iwl_tt_initialize(priv);
+
+	/**************************************************
+	 * 9. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	err = iwl_mac_setup_register(priv);
+	if (err)
+		goto out_remove_sysfs;
+
+	err = iwl_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
 	return 0;
 
  out_remove_sysfs:
-- 
cgit v1.2.3


From 4c84a8f1679f754d6080e49892f5cae2c88c91a8 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 22 Jan 2010 14:22:54 -0800
Subject: iwlwifi: clean up debugfs code

The debugfs code can be made a whole lot more
efficient by using debugfs_remove_recursive(),
the large chunk of variables can completely go
away and by moving two variables we no longer
need to allocate an extra chunk of memory.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-debug.h   |  64 +-------
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 239 ++++++++++-------------------
 drivers/net/wireless/iwlwifi/iwl-dev.h     |   3 +-
 3 files changed, 91 insertions(+), 215 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index aff1dc0756fc..1c7b53d511c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -67,63 +67,6 @@ do {                                            			\
 			       DUMP_PREFIX_OFFSET, 16, 1, p, len, 1);	\
 } while (0)
 
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-struct iwl_debugfs {
-	const char *name;
-	struct dentry *dir_drv;
-	struct dentry *dir_data;
-	struct dentry *dir_debug;
-	struct dentry *dir_rf;
-	struct dir_data_files {
-		struct dentry *file_sram;
-		struct dentry *file_nvm;
-		struct dentry *file_stations;
-		struct dentry *file_log_event;
-		struct dentry *file_channels;
-		struct dentry *file_status;
-		struct dentry *file_interrupt;
-		struct dentry *file_qos;
-		struct dentry *file_thermal_throttling;
-		struct dentry *file_led;
-		struct dentry *file_disable_ht40;
-		struct dentry *file_sleep_level_override;
-		struct dentry *file_current_sleep_command;
-	} dbgfs_data_files;
-	struct dir_rf_files {
-		struct dentry *file_disable_sensitivity;
-		struct dentry *file_disable_chain_noise;
-		struct dentry *file_disable_tx_power;
-	} dbgfs_rf_files;
-	struct dir_debug_files {
-		struct dentry *file_rx_statistics;
-		struct dentry *file_tx_statistics;
-		struct dentry *file_traffic_log;
-		struct dentry *file_rx_queue;
-		struct dentry *file_tx_queue;
-		struct dentry *file_ucode_rx_stats;
-		struct dentry *file_ucode_tx_stats;
-		struct dentry *file_ucode_general_stats;
-		struct dentry *file_sensitivity;
-		struct dentry *file_chain_noise;
-		struct dentry *file_tx_power;
-		struct dentry *file_power_save_status;
-		struct dentry *file_clear_ucode_statistics;
-		struct dentry *file_clear_traffic_statistics;
-		struct dentry *file_csr;
-		struct dentry *file_ucode_tracing;
-		struct dentry *file_fh_reg;
-		struct dentry *file_missed_beacon;
-		struct dentry *file_internal_scan;
-		struct dentry *file_plcp_delta;
-	} dbgfs_debug_files;
-	u32 sram_offset;
-	u32 sram_len;
-};
-
-int iwl_dbgfs_register(struct iwl_priv *priv, const char *name);
-void iwl_dbgfs_unregister(struct iwl_priv *priv);
-#endif
-
 #else
 #define IWL_DEBUG(__priv, level, fmt, args...)
 #define IWL_DEBUG_LIMIT(__priv, level, fmt, args...)
@@ -132,9 +75,10 @@ static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level,
 {}
 #endif				/* CONFIG_IWLWIFI_DEBUG */
 
-
-
-#ifndef CONFIG_IWLWIFI_DEBUGFS
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+int iwl_dbgfs_register(struct iwl_priv *priv, const char *name);
+void iwl_dbgfs_unregister(struct iwl_priv *priv);
+#else
 static inline int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 {
 	return 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 3f9c03998491..5c8377b9ad9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -41,43 +41,28 @@
 #include "iwl-calib.h"
 
 /* create and remove of files */
-#define DEBUGFS_ADD_DIR(name, parent) do {                              \
-	dbgfs->dir_##name = debugfs_create_dir(#name, parent);          \
-	if (!(dbgfs->dir_##name))                                       \
-		goto err; 						\
+#define DEBUGFS_ADD_FILE(name, parent, mode) do {			\
+	if (!debugfs_create_file(#name, mode, parent, priv,		\
+				 &iwl_dbgfs_##name##_ops))		\
+		goto err;						\
 } while (0)
 
-#define DEBUGFS_ADD_FILE(name, parent, mode) do {                       \
-	dbgfs->dbgfs_##parent##_files.file_##name =                     \
-	debugfs_create_file(#name, mode,                                \
-				dbgfs->dir_##parent, priv,              \
-				&iwl_dbgfs_##name##_ops);               \
-	if (!(dbgfs->dbgfs_##parent##_files.file_##name))               \
-		goto err;                                               \
+#define DEBUGFS_ADD_BOOL(name, parent, ptr) do {			\
+	struct dentry *__tmp;						\
+	__tmp = debugfs_create_bool(#name, S_IWUSR | S_IRUSR,		\
+				    parent, ptr);			\
+	if (IS_ERR(__tmp) || !__tmp)					\
+		goto err;						\
 } while (0)
 
-#define DEBUGFS_ADD_BOOL(name, parent, ptr) do {                        \
-	dbgfs->dbgfs_##parent##_files.file_##name =                     \
-	debugfs_create_bool(#name, S_IWUSR | S_IRUSR,                   \
-			    dbgfs->dir_##parent, ptr);                  \
-	if (IS_ERR(dbgfs->dbgfs_##parent##_files.file_##name)		\
-			|| !dbgfs->dbgfs_##parent##_files.file_##name)	\
-		goto err;                                               \
+#define DEBUGFS_ADD_X32(name, parent, ptr) do {				\
+	struct dentry *__tmp;						\
+	__tmp = debugfs_create_x32(#name, S_IWUSR | S_IRUSR,		\
+				   parent, ptr);			\
+	if (IS_ERR(__tmp) || !__tmp)					\
+		goto err;						\
 } while (0)
 
-#define DEBUGFS_ADD_X32(name, parent, ptr) do {                        \
-	dbgfs->dbgfs_##parent##_files.file_##name =                     \
-	debugfs_create_x32(#name, S_IRUSR, dbgfs->dir_##parent, ptr);   \
-	if (IS_ERR(dbgfs->dbgfs_##parent##_files.file_##name)		\
-			|| !dbgfs->dbgfs_##parent##_files.file_##name)	\
-		goto err;                                               \
-} while (0)
-
-#define DEBUGFS_REMOVE(name)  do {              \
-	debugfs_remove(name);                   \
-	name = NULL;                            \
-} while (0);
-
 /* file operation */
 #define DEBUGFS_READ_FUNC(name)                                         \
 static ssize_t iwl_dbgfs_##name##_read(struct file *file,               \
@@ -236,24 +221,24 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	size_t bufsz;
 
 	/* default is to dump the entire data segment */
-	if (!priv->dbgfs->sram_offset && !priv->dbgfs->sram_len) {
-		priv->dbgfs->sram_offset = 0x800000;
+	if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
+		priv->dbgfs_sram_offset = 0x800000;
 		if (priv->ucode_type == UCODE_INIT)
-			priv->dbgfs->sram_len = priv->ucode_init_data.len;
+			priv->dbgfs_sram_len = priv->ucode_init_data.len;
 		else
-			priv->dbgfs->sram_len = priv->ucode_data.len;
+			priv->dbgfs_sram_len = priv->ucode_data.len;
 	}
-	bufsz =  30 + priv->dbgfs->sram_len * sizeof(char) * 10;
+	bufsz =  30 + priv->dbgfs_sram_len * sizeof(char) * 10;
 	buf = kmalloc(bufsz, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 	pos += scnprintf(buf + pos, bufsz - pos, "sram_len: 0x%x\n",
-			priv->dbgfs->sram_len);
+			priv->dbgfs_sram_len);
 	pos += scnprintf(buf + pos, bufsz - pos, "sram_offset: 0x%x\n",
-			priv->dbgfs->sram_offset);
-	for (i = priv->dbgfs->sram_len; i > 0; i -= 4) {
-		val = iwl_read_targ_mem(priv, priv->dbgfs->sram_offset + \
-					priv->dbgfs->sram_len - i);
+			priv->dbgfs_sram_offset);
+	for (i = priv->dbgfs_sram_len; i > 0; i -= 4) {
+		val = iwl_read_targ_mem(priv, priv->dbgfs_sram_offset + \
+					priv->dbgfs_sram_len - i);
 		if (i < 4) {
 			switch (i) {
 			case 1:
@@ -293,11 +278,11 @@ static ssize_t iwl_dbgfs_sram_write(struct file *file,
 		return -EFAULT;
 
 	if (sscanf(buf, "%x,%x", &offset, &len) == 2) {
-		priv->dbgfs->sram_offset = offset;
-		priv->dbgfs->sram_len = len;
+		priv->dbgfs_sram_offset = offset;
+		priv->dbgfs_sram_len = len;
 	} else {
-		priv->dbgfs->sram_offset = 0;
-		priv->dbgfs->sram_len = 0;
+		priv->dbgfs_sram_offset = 0;
+		priv->dbgfs_sram_len = 0;
 	}
 
 	return count;
@@ -2263,75 +2248,73 @@ DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta);
  */
 int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 {
-	struct iwl_debugfs *dbgfs;
 	struct dentry *phyd = priv->hw->wiphy->debugfsdir;
-	int ret = 0;
+	struct dentry *dir_drv, *dir_data, *dir_rf, *dir_debug;
 
-	dbgfs = kzalloc(sizeof(struct iwl_debugfs), GFP_KERNEL);
-	if (!dbgfs) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	dir_drv = debugfs_create_dir(name, phyd);
+	if (!dir_drv)
+		return -ENOMEM;
 
-	priv->dbgfs = dbgfs;
-	dbgfs->name = name;
-	dbgfs->dir_drv = debugfs_create_dir(name, phyd);
-	if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)) {
-		ret = -ENOENT;
+	priv->debugfs_dir = dir_drv;
+
+	dir_data = debugfs_create_dir("data", dir_drv);
+	if (!dir_data)
+		goto err;
+	dir_rf = debugfs_create_dir("rf", dir_drv);
+	if (!dir_rf)
+		goto err;
+	dir_debug = debugfs_create_dir("debug", dir_drv);
+	if (!dir_debug)
 		goto err;
-	}
 
-	DEBUGFS_ADD_DIR(data, dbgfs->dir_drv);
-	DEBUGFS_ADD_DIR(rf, dbgfs->dir_drv);
-	DEBUGFS_ADD_DIR(debug, dbgfs->dir_drv);
-	DEBUGFS_ADD_FILE(nvm, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(sram, data, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(log_event, data, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(stations, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(channels, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(status, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(interrupt, data, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(qos, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(led, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(sleep_level_override, data, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(current_sleep_command, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(thermal_throttling, data, S_IRUSR);
-	DEBUGFS_ADD_FILE(disable_ht40, data, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(rx_statistics, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(tx_statistics, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(traffic_log, debug, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(rx_queue, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(tx_queue, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(tx_power, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(power_save_status, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(clear_ucode_statistics, debug, S_IWUSR);
-	DEBUGFS_ADD_FILE(clear_traffic_statistics, debug, S_IWUSR);
-	DEBUGFS_ADD_FILE(csr, debug, S_IWUSR);
-	DEBUGFS_ADD_FILE(fh_reg, debug, S_IRUSR);
-	DEBUGFS_ADD_FILE(missed_beacon, debug, S_IWUSR);
-	DEBUGFS_ADD_FILE(internal_scan, debug, S_IWUSR);
-	DEBUGFS_ADD_FILE(plcp_delta, debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(nvm, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(sram, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(log_event, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(stations, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(channels, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(status, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(interrupt, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(qos, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(led, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(sleep_level_override, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(current_sleep_command, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(thermal_throttling, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(disable_ht40, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(rx_statistics, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(tx_statistics, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(traffic_log, dir_debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(rx_queue, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(tx_queue, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(tx_power, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(power_save_status, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(clear_ucode_statistics, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(clear_traffic_statistics, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(csr, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(fh_reg, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(missed_beacon, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(internal_scan, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(plcp_delta, dir_debug, S_IWUSR | S_IRUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
-		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
-		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
-		DEBUGFS_ADD_FILE(ucode_general_stats, debug, S_IRUSR);
-		DEBUGFS_ADD_FILE(sensitivity, debug, S_IRUSR);
-		DEBUGFS_ADD_FILE(chain_noise, debug, S_IRUSR);
-		DEBUGFS_ADD_FILE(ucode_tracing, debug, S_IWUSR | S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_rx_stats, dir_debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_general_stats, dir_debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_tracing, dir_debug, S_IWUSR | S_IRUSR);
 	}
-	DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
-	DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
+	DEBUGFS_ADD_BOOL(disable_sensitivity, dir_rf, &priv->disable_sens_cal);
+	DEBUGFS_ADD_BOOL(disable_chain_noise, dir_rf,
 			 &priv->disable_chain_noise_cal);
 	if (((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) ||
 	    ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_3945))
-		DEBUGFS_ADD_BOOL(disable_tx_power, rf,
+		DEBUGFS_ADD_BOOL(disable_tx_power, dir_rf,
 				&priv->disable_tx_power_cal);
 	return 0;
 
 err:
-	IWL_ERR(priv, "Can't open the debugfs directory\n");
+	IWL_ERR(priv, "Can't create the debugfs directory\n");
 	iwl_dbgfs_unregister(priv);
-	return ret;
+	return -ENOMEM;
 }
 EXPORT_SYMBOL(iwl_dbgfs_register);
 
@@ -2341,63 +2324,11 @@ EXPORT_SYMBOL(iwl_dbgfs_register);
  */
 void iwl_dbgfs_unregister(struct iwl_priv *priv)
 {
-	if (!priv->dbgfs)
+	if (!priv->debugfs_dir)
 		return;
 
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sleep_level_override);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_current_sleep_command);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_nvm);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sram);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_log_event);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_channels);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_interrupt);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_qos);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_led);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_thermal_throttling);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_disable_ht40);
-	DEBUGFS_REMOVE(priv->dbgfs->dir_data);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_rx_statistics);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_statistics);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_traffic_log);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_rx_queue);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_queue);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_power);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_power_save_status);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_clear_ucode_statistics);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_clear_traffic_statistics);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_csr);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_fh_reg);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_missed_beacon);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_internal_scan);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_plcp_delta);
-	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_ucode_rx_stats);
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_ucode_tx_stats);
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_ucode_general_stats);
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_sensitivity);
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_chain_noise);
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
-			file_ucode_tracing);
-	}
-	DEBUGFS_REMOVE(priv->dbgfs->dir_debug);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise);
-	if (((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) ||
-	    ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_3945))
-		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_tx_power);
-	DEBUGFS_REMOVE(priv->dbgfs->dir_rf);
-	DEBUGFS_REMOVE(priv->dbgfs->dir_drv);
-	kfree(priv->dbgfs);
-	priv->dbgfs = NULL;
+	debugfs_remove_recursive(priv->debugfs_dir);
+	priv->debugfs_dir = NULL;
 }
 EXPORT_SYMBOL(iwl_dbgfs_unregister);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index a1f3ecb69ed0..d9f325bd4b69 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1309,7 +1309,8 @@ struct iwl_priv {
 	u16 rx_traffic_idx;
 	u8 *tx_traffic;
 	u8 *rx_traffic;
-	struct iwl_debugfs *dbgfs;
+	struct dentry *debugfs_dir;
+	u32 dbgfs_sram_offset, dbgfs_sram_len;
 #endif /* CONFIG_IWLWIFI_DEBUGFS */
 #endif /* CONFIG_IWLWIFI_DEBUG */
 
-- 
cgit v1.2.3


From 875295f183a8cb18e9fde0edae0ab88719debcbd Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 22 Jan 2010 14:22:55 -0800
Subject: iwlwifi: fix sparse warning

sparse correctly warns about symbol not
being static, make static to shut it up.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 1853064855cd..d4500b5e0175 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -705,7 +705,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
 	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 
-void iwl_continuous_event_trace(struct iwl_priv *priv)
+static void iwl_continuous_event_trace(struct iwl_priv *priv)
 {
 	u32 capacity;   /* event log capacity in # entries */
 	u32 base;       /* SRAM byte address of event log header */
-- 
cgit v1.2.3


From 65baa90d92097ce9b7c080697e6b370d335c2efc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 22 Jan 2010 14:22:56 -0800
Subject: iwlwifi: check endianness annotations by default

sparse won't check endianness annotations by
default, but iwlwifi is and should be clean
so we can make sparse check them on it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/Makefile | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 7f82044af242..bdaa924d2853 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -20,3 +20,5 @@ iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
 # 3945
 obj-$(CONFIG_IWL3945)	+= iwl3945.o
 iwl3945-objs		:= iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
+
+ccflags-y += -D__CHECK_ENDIAN__
-- 
cgit v1.2.3


From 81963d68575d497d626ce13e42c84518a931cc12 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 22 Jan 2010 14:22:57 -0800
Subject: iwlwifi: cleanup spectrum measurement command support

In iwlagn the support for spectrum measurement command has been
disabled since v2.6.29 without any requests for it. In addition to this
when this command is indeed enabled it has been found to trigger firmware
SYSASSERT on at least 4965 and 5100 hardware (see
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1952 ). Since then
this code has been bitrotting and cannot just be enabled without porting.

Remove support for spectrum measurement command from iwlagn. It can be
added back if there is a future need and the firmware problem it triggers
has been fixed. Support for the spectrim measurement notification remains
as it has been enabled all the time.

In addition to this remove the 3945 spectrum measurement command Kconfig
option and make this command always supported. The code added by this
enabling is minimal and only run when user triggers a spectrum measurement
request via sysfs.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/Kconfig        |  12 --
 drivers/net/wireless/iwlwifi/Makefile       |   1 -
 drivers/net/wireless/iwlwifi/iwl-agn.c      |  11 +-
 drivers/net/wireless/iwlwifi/iwl-core.h     |  10 +-
 drivers/net/wireless/iwlwifi/iwl-dev.h      |   3 +-
 drivers/net/wireless/iwlwifi/iwl-rx.c       |  18 +++
 drivers/net/wireless/iwlwifi/iwl-spectrum.c | 198 ----------------------------
 drivers/net/wireless/iwlwifi/iwl3945-base.c |  27 ++--
 8 files changed, 33 insertions(+), 247 deletions(-)
 delete mode 100644 drivers/net/wireless/iwlwifi/iwl-spectrum.c

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index e44e572acb92..dc8ed1527666 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -3,12 +3,6 @@ config IWLWIFI
 	depends on PCI && MAC80211
 	select FW_LOADER
 
-config IWLWIFI_SPECTRUM_MEASUREMENT
-	bool "Enable Spectrum Measurement in iwlagn driver"
-	depends on IWLWIFI
-	---help---
-	  This option will enable spectrum measurement for the iwlagn driver.
-
 config IWLWIFI_DEBUG
 	bool "Enable full debugging output in iwlagn and iwl3945 drivers"
 	depends on IWLWIFI
@@ -120,9 +114,3 @@ config IWL3945
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
 	  module will be called iwl3945.
-
-config IWL3945_SPECTRUM_MEASUREMENT
-	bool "Enable Spectrum Measurement in iwl3945 driver"
-	depends on IWL3945
-	---help---
-	  This option will enable spectrum measurement for the iwl3945 driver.
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index bdaa924d2853..4e378faee650 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -3,7 +3,6 @@ iwlcore-objs 		:= iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
 iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
 iwlcore-objs 		+= iwl-scan.o iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
 iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
 
 CFLAGS_iwl-devtrace.o := -I$(src)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index d4500b5e0175..4a268927377b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -73,13 +73,7 @@
 #define VD
 #endif
 
-#ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
-#define VS "s"
-#else
-#define VS
-#endif
-
-#define DRV_VERSION     IWLWIFI_VERSION VD VS
+#define DRV_VERSION     IWLWIFI_VERSION VD
 
 
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
@@ -889,6 +883,8 @@ static void iwl_setup_rx_handlers(struct iwl_priv *priv)
 	priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
 	priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
 	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
+	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
+			iwl_rx_spectrum_measure_notif;
 	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
 	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
 	    iwl_rx_pm_debug_statistics_notif;
@@ -902,7 +898,6 @@ static void iwl_setup_rx_handlers(struct iwl_priv *priv)
 	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
 	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
 
-	iwl_setup_spectrum_handlers(priv);
 	iwl_setup_rx_scan_handlers(priv);
 
 	/* status change handler */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index e14e32976b80..ec1fe1d7cc9a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -429,6 +429,8 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index);
 /* Handlers */
 void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
 			       struct iwl_rx_mem_buffer *rxb);
+void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
+					  struct iwl_rx_mem_buffer *rxb);
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb);
 void iwl_reply_statistics(struct iwl_priv *priv,
@@ -531,14 +533,6 @@ int iwl_send_calib_results(struct iwl_priv *priv);
 int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len);
 void iwl_calib_free_results(struct iwl_priv *priv);
 
-/*******************************************************************************
- * Spectrum Measureemtns in  iwl-spectrum.c
- ******************************************************************************/
-#ifdef CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT
-void iwl_setup_spectrum_handlers(struct iwl_priv *priv);
-#else
-static inline void iwl_setup_spectrum_handlers(struct iwl_priv *priv) {}
-#endif
 /*****************************************************
  *   S e n d i n g     H o s t     C o m m a n d s   *
  *****************************************************/
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index d9f325bd4b69..9b0a5cbc20f9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1055,11 +1055,10 @@ struct iwl_priv {
 
 	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
 
-#if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
 	/* spectrum measurement report caching */
 	struct iwl_spectrum_notification measure_report;
 	u8 measurement_status;
-#endif
+
 	/* ucode beacon time */
 	u32 ucode_beacon_time;
 	int missed_beacon_threshold;
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index ea309f42a78a..5df66382d922 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -512,6 +512,24 @@ void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_rx_missed_beacon_notif);
 
+void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
+					  struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
+
+	if (!report->state) {
+		IWL_DEBUG_11H(priv,
+			"Spectrum Measure Notification: Start\n");
+		return;
+	}
+
+	memcpy(&priv->measure_report, report, sizeof(*report));
+	priv->measurement_status |= MEASUREMENT_READY;
+}
+EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif);
+
+
 
 /* Calculate noise level, based on measurements during network silence just
  *   before arriving beacon.  This measurement can be done only if we know
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.c b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
deleted file mode 100644
index da166d1d1b13..000000000000
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-spectrum.h"
-
-#define BEACON_TIME_MASK_LOW	0x00FFFFFF
-#define BEACON_TIME_MASK_HIGH	0xFF000000
-#define TIME_UNIT		1024
-
-/*
- * extended beacon time format
- * time in usec will be changed into a 32-bit value in 8:24 format
- * the high 1 byte is the beacon counts
- * the lower 3 bytes is the time in usec within one beacon interval
- */
-
-/* TOOD: was used in sysfs debug interface need to add to mac */
-#if 0
-static u32 iwl_usecs_to_beacons(u32 usec, u32 beacon_interval)
-{
-	u32 quot;
-	u32 rem;
-	u32 interval = beacon_interval * 1024;
-
-	if (!interval || !usec)
-		return 0;
-
-	quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
-	rem = (usec % interval) & BEACON_TIME_MASK_LOW;
-
-	return (quot << 24) + rem;
-}
-
-/* base is usually what we get from ucode with each received frame,
- * the same as HW timer counter counting down
- */
-
-static __le32 iwl_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
-{
-	u32 base_low = base & BEACON_TIME_MASK_LOW;
-	u32 addon_low = addon & BEACON_TIME_MASK_LOW;
-	u32 interval = beacon_interval * TIME_UNIT;
-	u32 res = (base & BEACON_TIME_MASK_HIGH) +
-	    (addon & BEACON_TIME_MASK_HIGH);
-
-	if (base_low > addon_low)
-		res += base_low - addon_low;
-	else if (base_low < addon_low) {
-		res += interval + base_low - addon_low;
-		res += (1 << 24);
-	} else
-		res += (1 << 24);
-
-	return cpu_to_le32(res);
-}
-static int iwl_get_measurement(struct iwl_priv *priv,
-			       struct ieee80211_measurement_params *params,
-			       u8 type)
-{
-	struct iwl4965_spectrum_cmd spectrum;
-	struct iwl_rx_packet *res;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
-		.data = (void *)&spectrum,
-		.meta.flags = CMD_WANT_SKB,
-	};
-	u32 add_time = le64_to_cpu(params->start_time);
-	int rc;
-	int spectrum_resp_status;
-	int duration = le16_to_cpu(params->duration);
-
-	if (iwl_is_associated(priv))
-		add_time =
-		    iwl_usecs_to_beacons(
-			le64_to_cpu(params->start_time) - priv->last_tsf,
-			le16_to_cpu(priv->rxon_timing.beacon_interval));
-
-	memset(&spectrum, 0, sizeof(spectrum));
-
-	spectrum.channel_count = cpu_to_le16(1);
-	spectrum.flags =
-	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
-	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
-	cmd.len = sizeof(spectrum);
-	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
-
-	if (iwl_is_associated(priv))
-		spectrum.start_time =
-		    iwl_add_beacon_time(priv->last_beacon_time,
-				add_time,
-				le16_to_cpu(priv->rxon_timing.beacon_interval));
-	else
-		spectrum.start_time = 0;
-
-	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
-	spectrum.channels[0].channel = params->channel;
-	spectrum.channels[0].type = type;
-	if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
-		spectrum.flags |= RXON_FLG_BAND_24G_MSK |
-		    RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
-	if (rc)
-		return rc;
-
-	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
-		rc = -EIO;
-	}
-
-	spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
-	switch (spectrum_resp_status) {
-	case 0:		/* Command will be handled */
-		if (res->u.spectrum.id != 0xff) {
-			IWL_DEBUG_INFO(priv,
-				"Replaced existing measurement: %d\n",
-				res->u.spectrum.id);
-			priv->measurement_status &= ~MEASUREMENT_READY;
-		}
-		priv->measurement_status |= MEASUREMENT_ACTIVE;
-		rc = 0;
-		break;
-
-	case 1:		/* Command will not be handled */
-		rc = -EAGAIN;
-		break;
-	}
-
-	dev_kfree_skb_any(cmd.meta.u.skb);
-
-	return rc;
-}
-#endif
-
-static void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
-					  struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
-
-	if (!report->state) {
-		IWL_DEBUG_11H(priv,
-			"Spectrum Measure Notification: Start\n");
-		return;
-	}
-
-	memcpy(&priv->measure_report, report, sizeof(*report));
-	priv->measurement_status |= MEASUREMENT_READY;
-}
-
-void iwl_setup_spectrum_handlers(struct iwl_priv *priv)
-{
-	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
-			iwl_rx_spectrum_measure_notif;
-}
-EXPORT_SYMBOL(iwl_setup_spectrum_handlers);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 9c0b6ebbdc59..cd42b5838b38 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -56,6 +56,7 @@
 #include "iwl-helpers.h"
 #include "iwl-core.h"
 #include "iwl-dev.h"
+#include "iwl-spectrum.h"
 
 /*
  * module name, copyright, version, etc.
@@ -70,13 +71,12 @@
 #define VD
 #endif
 
-#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
-#define VS "s"
-#else
-#define VS
-#endif
-
-#define DRV_VERSION  IWLWIFI_VERSION VD VS
+/*
+ * add "s" to indicate spectrum measurement included.
+ * we add it here to be consistent with previous releases in which
+ * this was configurable.
+ */
+#define DRV_VERSION  IWLWIFI_VERSION VD "s"
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2010 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 
@@ -689,10 +689,6 @@ drop:
 	return -1;
 }
 
-#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
-
-#include "iwl-spectrum.h"
-
 #define BEACON_TIME_MASK_LOW	0x00FFFFFF
 #define BEACON_TIME_MASK_HIGH	0xFF000000
 #define TIME_UNIT		1024
@@ -819,7 +815,6 @@ static int iwl3945_get_measurement(struct iwl_priv *priv,
 
 	return rc;
 }
-#endif
 
 static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
 			       struct iwl_rx_mem_buffer *rxb)
@@ -962,6 +957,8 @@ static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
 	priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
 	priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
 	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
+	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
+			iwl_rx_spectrum_measure_notif;
 	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
 	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
 	    iwl_rx_pm_debug_statistics_notif;
@@ -975,7 +972,6 @@ static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
 	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics;
 	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
 
-	iwl_setup_spectrum_handlers(priv);
 	iwl_setup_rx_scan_handlers(priv);
 	priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
 
@@ -3569,8 +3565,6 @@ static ssize_t store_filter_flags(struct device *d,
 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
 		   store_filter_flags);
 
-#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
-
 static ssize_t show_measurement(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
@@ -3640,7 +3634,6 @@ static ssize_t store_measurement(struct device *d,
 
 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
 		   show_measurement, store_measurement);
-#endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
 
 static ssize_t store_retry_rate(struct device *d,
 				struct device_attribute *attr,
@@ -3823,9 +3816,7 @@ static struct attribute *iwl3945_sysfs_entries[] = {
 	&dev_attr_dump_errors.attr,
 	&dev_attr_flags.attr,
 	&dev_attr_filter_flags.attr,
-#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
 	&dev_attr_measurement.attr,
-#endif
 	&dev_attr_retry_rate.attr,
 	&dev_attr_statistics.attr,
 	&dev_attr_status.attr,
-- 
cgit v1.2.3


From ff27fabe62d288038b36f41ac6a2190ed7d15993 Mon Sep 17 00:00:00 2001
From: Daniel Halperin <dhalperi@cs.washington.edu>
Date: Fri, 22 Jan 2010 14:22:58 -0800
Subject: iwlwifi: fix throughput degradation in aggregation mode

The following commit

	commit e4da8c37af626001ff704fb29ea14eb58f5f7208
	Author: Johannes Berg <johannes@sipsolutions.net>
	Date:   Wed Dec 23 13:15:43 2009 +0100

	   mac80211: make off-channel work generic

triggered a bug in iwlwifi where HT parameters would not be correctly set in
some mac80211 pathways. The aggregation (and possibly other) station flags were
not being set, which limited the size of aggregation blocks and reduced
throughput at high rates.

>From Johannes:
"""
Due to Wey-Yi's patch to use the set-channel command when the channel changes
while associated, we don't get a full new RXON. Therefore, we don't re-set the
rxon-station either. However, under some circumstances that apparently have
gotten more likely mac80211 will first set up the BSS info, then add the
station and then switch to an HT channel type.

Therefore, the check for "priv->current_ht_config.is_ht" in
iwl_rxon_add_station() will hit false and not fill in the HT information.

However, that check can just be removed, which is the easiest fix for all this,
because the HT capa struct is always there, just could possibly have the
ht_supported member set to false.
"""

A sample good link in my 3x3 network improves by approximately 25% TCP
throughput. This fixes Bug 2144
(http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2144).

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-sta.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index fcac73cf82bc..e0b13fb78653 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1045,24 +1045,19 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 	struct ieee80211_sta_ht_cap *cur_ht_config = NULL;
 	u8 sta_id;
 
-	/* Add station to device's station table */
-
 	/*
-	 * XXX: This check is definitely not correct, if we're an AP
-	 *	it'll always be false which is not what we want, but
-	 *	it doesn't look like iwlagn is prepared to be an HT
-	 *	AP anyway.
+	 * Set HT capabilities. It is ok to set this struct even if not using
+	 * HT config: the priv->current_ht_config.is_ht flag will just be false
 	 */
-	if (priv->current_ht_config.is_ht) {
-		rcu_read_lock();
-		sta = ieee80211_find_sta(priv->vif, addr);
-		if (sta) {
-			memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config));
-			cur_ht_config = &ht_config;
-		}
-		rcu_read_unlock();
+	rcu_read_lock();
+	sta = ieee80211_find_sta(priv->vif, addr);
+	if (sta) {
+		memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config));
+		cur_ht_config = &ht_config;
 	}
+	rcu_read_unlock();
 
+	/* Add station to device's station table */
 	sta_id = iwl_add_station(priv, addr, is_ap, CMD_SYNC, cur_ht_config);
 
 	/* Set up default rate scaling table in device's station table */
-- 
cgit v1.2.3


From 658965107e2a45a1a4297cb494adc55797dd9ad1 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 24 Jan 2010 03:26:11 +0100
Subject: ath9k: improve max rate retry handling

ath9k currently forces hw->max_rate_tries to 4 to work around rate
control inefficiencies. This has some negative side effects, such as
rate_control_send_low also using a maximum of 4 tries, which could
negatively affect reliability of unicast management frames.
This patch pushes the retry limit to the rate control instead, and
allows it to use more tries on the last stage to prevent unnecessary
packet loss.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/init.c |  3 +--
 drivers/net/wireless/ath/ath9k/rc.c   | 12 ++++++------
 2 files changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 5f78d7a5ff22..c3066b553546 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -640,8 +640,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->max_rates = 4;
 	hw->channel_change_time = 5000;
 	hw->max_listen_interval = 10;
-	/* Hardware supports 10 but we use 4 */
-	hw->max_rate_tries = 4;
+	hw->max_rate_tries = 10;
 	hw->sta_data_size = sizeof(struct ath_node);
 	hw->vif_data_size = sizeof(struct ath_vif);
 
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index c915954d4d5b..74290137f43d 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -678,13 +678,13 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	 * For Multi Rate Retry we use a different number of
 	 * retry attempt counts. This ends up looking like this:
 	 *
-	 * MRR[0] = 2
-	 * MRR[1] = 2
-	 * MRR[2] = 2
-	 * MRR[3] = 4
+	 * MRR[0] = 4
+	 * MRR[1] = 4
+	 * MRR[2] = 4
+	 * MRR[3] = 8
 	 *
 	 */
-	try_per_rate = sc->hw->max_rate_tries;
+	try_per_rate = 4;
 
 	rate_table = sc->cur_rate_table;
 	rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe);
@@ -714,7 +714,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	for ( ; i < 4; i++) {
 		/* Use twice the number of tries for the last MRR segment. */
 		if (i + 1 == 4)
-			try_per_rate = 4;
+			try_per_rate = 8;
 
 		ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
 		/* All other rates in the series have RTS enabled */
-- 
cgit v1.2.3


From 96869a39399269a776a94812e9fff3d38b47d838 Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Sun, 24 Jan 2010 13:13:32 +0100
Subject: b43: Workaround circular locking in hw-tkip key update callback

The TKIP key update callback is called from the RX path, where the driver
mutex is already locked. This results in a circular locking bug.
Avoid this by removing the lock.

Johannes noted that there is a separate bug: The callback still breaks on SDIO
hardware, because SDIO hardware access needs to sleep, but we are not allowed
to sleep in the callback due to mac80211's RCU locking.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: kecsa@kutfo.hit.bme.hu
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6d7cf3c2f7bf..66220cde9c49 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -856,22 +856,19 @@ static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
 	if (B43_WARN_ON(!modparam_hwtkip))
 		return;
 
-	mutex_lock(&wl->mutex);
-
+	/* This is only called from the RX path through mac80211, where
+	 * our mutex is already locked. */
+	B43_WARN_ON(!mutex_is_locked(&wl->mutex));
 	dev = wl->current_dev;
-	if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
-		goto out_unlock;
+	B43_WARN_ON(!dev || b43_status(dev) < B43_STAT_INITIALIZED);
 
 	keymac_write(dev, index, NULL);	/* First zero out mac to avoid race */
 
 	rx_tkip_phase1_write(dev, index, iv32, phase1key);
 	/* only pairwise TKIP keys are supported right now */
 	if (WARN_ON(!sta))
-		goto out_unlock;
+		return;
 	keymac_write(dev, index, sta->addr);
-
-out_unlock:
-	mutex_unlock(&wl->mutex);
 }
 
 static void do_key_write(struct b43_wldev *dev,
-- 
cgit v1.2.3


From 3ed0fac3b56504aaaa3d800e7891ed4a7068b85c Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 25 Jan 2010 18:59:58 +0100
Subject: b43: N-PHY: fix one bit off in parsing RF Ctrl Override arguments
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index a45a1f3ced42..061b01b814d1 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1031,7 +1031,7 @@ static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
 	u8 index = fls(field);
 	u8 addr, en_addr, val_addr;
 	/* we expect only one bit set */
-	B43_WARN_ON(field & (~(1 << index)));
+	B43_WARN_ON(field & (~(1 << (index - 1))));
 
 	if (dev->phy.rev >= 3) {
 		const struct nphy_rf_control_override_rev3 *rf_ctrl;
-- 
cgit v1.2.3


From 986504540306137dfc90a936f9f25086d15621c5 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 25 Jan 2010 18:59:59 +0100
Subject: b43: make cordic common (LP-PHY and N-PHY need it)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_common.c | 38 +++++++++++++++++++++++++++++
 drivers/net/wireless/b43/phy_common.h |  3 +++
 drivers/net/wireless/b43/phy_lp.c     | 45 ++---------------------------------
 3 files changed, 43 insertions(+), 43 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 75b26e175e8f..446c41bb1e9f 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -421,3 +421,41 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
 {
 	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
 }
+
+struct b43_c32 b43_cordic(int theta)
+{
+	u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
+		      58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
+		      229, 115, 57, 29, };
+	int i, tmp, signx = 1, angle = 0;
+	struct b43_c32 ret = { .i = 39797, .q = 0, };
+
+	theta = clamp_t(int, theta, -180, 180);
+
+	if (theta > 90) {
+		theta -= 180;
+		signx = -1;
+	} else if (theta < -90) {
+		theta += 180;
+		signx = -1;
+	}
+
+	for (i = 0; i <= 17; i++) {
+		if (theta > angle) {
+			tmp = ret.i - (ret.q >> i);
+			ret.q += ret.i >> i;
+			ret.i = tmp;
+			angle += arctg[i];
+		} else {
+			tmp = ret.i + (ret.q >> i);
+			ret.q -= ret.i >> i;
+			ret.i = tmp;
+			angle -= arctg[i];
+		}
+	}
+
+	ret.i *= signx;
+	ret.q *= signx;
+
+	return ret;
+}
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index f635f9e4f83d..9e4de47d0608 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -5,6 +5,8 @@
 
 struct b43_wldev;
 
+/* Complex number using 2 32-bit signed integers */
+struct b43_c32 { s32 i, q; };
 
 /* PHY register routing bits */
 #define B43_PHYROUTE			0x0C00 /* PHY register routing bits mask */
@@ -421,5 +423,6 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
  */
 void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
 
+struct b43_c32 b43_cordic(int theta);
 
 #endif /* LINUX_B43_PHY_COMMON_H_ */
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index b58d6cf26580..453585073437 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -1767,47 +1767,6 @@ out:
 	return ret;
 }
 
-/* Complex number using 2 32-bit signed integers */
-typedef struct {s32 i, q;} lpphy_c32;
-
-static lpphy_c32 lpphy_cordic(int theta)
-{
-	u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
-		      58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
-		      229, 115, 57, 29, };
-	int i, tmp, signx = 1, angle = 0;
-	lpphy_c32 ret = { .i = 39797, .q = 0, };
-
-	theta = clamp_t(int, theta, -180, 180);
-
-	if (theta > 90) {
-		theta -= 180;
-		signx = -1;
-	} else if (theta < -90) {
-		theta += 180;
-		signx = -1;
-	}
-
-	for (i = 0; i <= 17; i++) {
-		if (theta > angle) {
-			tmp = ret.i - (ret.q >> i);
-			ret.q += ret.i >> i;
-			ret.i = tmp;
-			angle += arctg[i];
-		} else {
-			tmp = ret.i + (ret.q >> i);
-			ret.q -= ret.i >> i;
-			ret.i = tmp;
-			angle -= arctg[i];
-		}
-	}
-
-	ret.i *= signx;
-	ret.q *= signx;
-
-	return ret;
-}
-
 static void lpphy_run_samples(struct b43_wldev *dev, u16 samples, u16 loops,
 			      u16 wait)
 {
@@ -1826,7 +1785,7 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	u16 buf[64];
 	int i, samples = 0, angle = 0, rotation = (9 * freq) / 500;
-	lpphy_c32 sample;
+	struct b43_c32 sample;
 
 	lpphy->tx_tone_freq = freq;
 
@@ -1842,7 +1801,7 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
 	}
 
 	for (i = 0; i < samples; i++) {
-		sample = lpphy_cordic(angle);
+		sample = b43_cordic(angle);
 		angle += rotation;
 		buf[i] = ((sample.i * max) & 0xFF) << 8;
 		buf[i] |= (sample.q * max) & 0xFF;
-- 
cgit v1.2.3


From 6f98e62a9f1bdbd83d8d1be8c2ca6f58099846ef Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 25 Jan 2010 19:00:00 +0100
Subject: b43: update cordic code to match current specs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_common.c | 19 +++++++++++++------
 drivers/net/wireless/b43/phy_common.h |  4 ++++
 drivers/net/wireless/b43/phy_lp.c     |  7 ++++---
 3 files changed, 21 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 446c41bb1e9f..8f7d7eff2d80 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -422,21 +422,28 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
 	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
 struct b43_c32 b43_cordic(int theta)
 {
 	u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
 		      58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
 		      229, 115, 57, 29, };
-	int i, tmp, signx = 1, angle = 0;
+	u8 i;
+	s32 tmp;
+	s8 signx = 1;
+	u32 angle = 0;
 	struct b43_c32 ret = { .i = 39797, .q = 0, };
 
-	theta = clamp_t(int, theta, -180, 180);
+	while (theta > (180 << 16))
+		theta -= (360 << 16);
+	while (theta < -(180 << 16))
+		theta += (360 << 16);
 
-	if (theta > 90) {
-		theta -= 180;
+	if (theta > (90 << 16)) {
+		theta -= (180 << 16);
 		signx = -1;
-	} else if (theta < -90) {
-		theta += 180;
+	} else if (theta < -(90 << 16)) {
+		theta += (180 << 16);
 		signx = -1;
 	}
 
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 9e4de47d0608..bd480b481bfc 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -8,6 +8,10 @@ struct b43_wldev;
 /* Complex number using 2 32-bit signed integers */
 struct b43_c32 { s32 i, q; };
 
+#define CORDIC_CONVERT(value)	(((value) >= 0) ? \
+				 ((((value) >> 15) + 1) >> 1) : \
+				 -((((-(value)) >> 15) + 1) >> 1))
+
 /* PHY register routing bits */
 #define B43_PHYROUTE			0x0C00 /* PHY register routing bits mask */
 #define  B43_PHYROUTE_BASE		0x0000 /* Base registers */
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 453585073437..185219e0a552 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -1784,7 +1784,8 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
 	u16 buf[64];
-	int i, samples = 0, angle = 0, rotation = (9 * freq) / 500;
+	int i, samples = 0, angle = 0;
+	int rotation = (((36 * freq) / 20) << 16) / 100;
 	struct b43_c32 sample;
 
 	lpphy->tx_tone_freq = freq;
@@ -1803,8 +1804,8 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
 	for (i = 0; i < samples; i++) {
 		sample = b43_cordic(angle);
 		angle += rotation;
-		buf[i] = ((sample.i * max) & 0xFF) << 8;
-		buf[i] |= (sample.q * max) & 0xFF;
+		buf[i] = CORDIC_CONVERT((sample.i * max) & 0xFF) << 8;
+		buf[i] |= CORDIC_CONVERT((sample.q * max) & 0xFF);
 	}
 
 	b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
-- 
cgit v1.2.3


From f2982181e0531c0b12752336a1578626f99e7828 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Mon, 25 Jan 2010 19:00:01 +0100
Subject: b43: N-PHY: use cordic to generate samples
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 061b01b814d1..df4bf435e218 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -821,8 +821,9 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 					bool test)
 {
 	int i;
-	u16 bw, len, num, rot, angle;
-	/* TODO: *buffer; */
+	u16 bw, len, rot, angle;
+	b43_c32 *samples;
+
 
 	bw = (dev->phy.is_40mhz) ? 40 : 20;
 	len = bw << 3;
@@ -839,18 +840,20 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 		len = bw << 1;
 	}
 
-	/* TODO: buffer = kzalloc(len * sizeof(u32), GFP_KERNEL); */
-	num = len;
+	samples = kzalloc(len * sizeof(b43_c32), GFP_KERNEL);
 	rot = (((freq * 36) / bw) << 16) / 100;
 	angle = 0;
 
-	for (i = 0; i < num; i++) {
-		/* TODO */
+	for (i = 0; i < len; i++) {
+		samples[i] = b43_cordic(angle);
+		angle += rot;
+		samples[i].q = CORDIC_CONVERT(samples[i].q * max);
+		samples[i].i = CORDIC_CONVERT(samples[i].i * max);
 	}
 
-	/* TODO: Call N PHY Load Sample Table with buffer, num as arguments */
-	/* TODO: kfree(buffer); */
-	return num;
+	/* TODO: Call N PHY Load Sample Table with buffer, len as arguments */
+	kfree(samples);
+	return len;
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RunSamples */
-- 
cgit v1.2.3


From 4f9a91c81273b66afe0b6a9be460b47581b28246 Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Mon, 25 Jan 2010 15:46:58 -0800
Subject: qlge: Only free resources if they were allocated

Currently qlge tries to release regions even if they were not allocated.
This causes messages like the following in the kernel log

Trying to free nonexistent resource <00000000006af400-00000000006af4ff>
Trying to free nonexistent resource <00003c04ff9f4000-00003c04ff9f7fff>
Trying to free nonexistent resource <00003c04ffc00000-00003c04ffcfffff>

This patch fixes the goto logic in order to not release the resources
if they were not allocated.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 707b391afa02..894a7c84faef 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4119,7 +4119,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	err = pcie_set_readrq(pdev, 4096);
 	if (err) {
 		dev_err(&pdev->dev, "Set readrq failed.\n");
-		goto err_out;
+		goto err_out1;
 	}
 
 	err = pci_request_regions(pdev, DRV_NAME);
@@ -4140,7 +4140,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
 	if (err) {
 		dev_err(&pdev->dev, "No usable DMA configuration.\n");
-		goto err_out;
+		goto err_out2;
 	}
 
 	/* Set PCIe reset type for EEH to fundamental. */
@@ -4152,7 +4152,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	if (!qdev->reg_base) {
 		dev_err(&pdev->dev, "Register mapping failed.\n");
 		err = -ENOMEM;
-		goto err_out;
+		goto err_out2;
 	}
 
 	qdev->doorbell_area_size = pci_resource_len(pdev, 3);
@@ -4162,14 +4162,14 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	if (!qdev->doorbell_area) {
 		dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
 		err = -ENOMEM;
-		goto err_out;
+		goto err_out2;
 	}
 
 	err = ql_get_board_info(qdev);
 	if (err) {
 		dev_err(&pdev->dev, "Register access failed.\n");
 		err = -EIO;
-		goto err_out;
+		goto err_out2;
 	}
 	qdev->msg_enable = netif_msg_init(debug, default_msg);
 	spin_lock_init(&qdev->hw_lock);
@@ -4179,7 +4179,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	err = qdev->nic_ops->get_flash(qdev);
 	if (err) {
 		dev_err(&pdev->dev, "Invalid FLASH.\n");
-		goto err_out;
+		goto err_out2;
 	}
 
 	memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
@@ -4212,8 +4212,9 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 			 DRV_NAME, DRV_VERSION);
 	}
 	return 0;
-err_out:
+err_out2:
 	ql_release_all(pdev);
+err_out1:
 	pci_disable_device(pdev);
 	return err;
 }
-- 
cgit v1.2.3


From 8704a2c8e9db24157a7b08d1678bf840f2318779 Mon Sep 17 00:00:00 2001
From: Guido Barzini <gbarzini@solarflare.com>
Date: Mon, 25 Jan 2010 15:49:19 -0800
Subject: sfc: Add workspace for GMAC bug workaround to MCDI MAC_STATS buffer

Due to a hardware bug in the SFC9000 family, the firmware must
transfer raw GMAC statistics to host memory before aggregating them
into the cooked (speed-independent) MAC statistics.  Extend the stats
buffer to support this.

The length of the buffer is explicit in the MAC_STATS command, so this
change is backward-compatible on both sides.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/mcdi_pcol.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
index 2a85360a46f0..73e71f420624 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -1090,8 +1090,10 @@
 #define MC_CMD_MAC_RX_LANES01_DISP_ERR 57
 #define MC_CMD_MAC_RX_LANES23_DISP_ERR 58
 #define MC_CMD_MAC_RX_MATCH_FAULT 59
+#define MC_CMD_GMAC_DMABUF_START 64
+#define MC_CMD_GMAC_DMABUF_END   95
 /* Insert new members here. */
-#define MC_CMD_MAC_GENERATION_END 60
+#define MC_CMD_MAC_GENERATION_END 96
 #define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1)
 
 /* MC_CMD_MAC_STATS:
-- 
cgit v1.2.3


From 5a27e86babe79cf5f575394bb1055448458df6c7 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Mon, 25 Jan 2010 15:49:59 -0800
Subject: sfc: Use fixed-size buffers for MCDI NVRAM requests

The low-level MCDI code always uses 32-bit MMIO operations, and
callers must pad input and output buffers to multiples of 4 bytes.
The MCDI NVRAM functions are not doing this.  Also, their buffers are
declared as variable-length arrays with no explicit maximum length.

Switch to a fixed buffer size based on the chunk size used by the
MTD driver (which is a multiple of 4).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/mcdi.c | 7 ++++---
 drivers/net/sfc/mcdi.h | 1 +
 drivers/net/sfc/mtd.c  | 5 ++---
 3 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 0d4eba7266ec..9f035b9f0350 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -804,7 +804,7 @@ int efx_mcdi_nvram_read(struct efx_nic *efx, unsigned int type,
 			loff_t offset, u8 *buffer, size_t length)
 {
 	u8 inbuf[MC_CMD_NVRAM_READ_IN_LEN];
-	u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(length)];
+	u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
 	size_t outlen;
 	int rc;
 
@@ -828,7 +828,7 @@ fail:
 int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
 			   loff_t offset, const u8 *buffer, size_t length)
 {
-	u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(length)];
+	u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
 	int rc;
 
 	MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_TYPE, type);
@@ -838,7 +838,8 @@ int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
 
 	BUILD_BUG_ON(MC_CMD_NVRAM_WRITE_OUT_LEN != 0);
 
-	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, sizeof(inbuf),
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf,
+			  ALIGN(MC_CMD_NVRAM_WRITE_IN_LEN(length), 4),
 			  NULL, 0, NULL);
 	if (rc)
 		goto fail;
diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/sfc/mcdi.h
index de916728c2e3..10ce98f4c0fb 100644
--- a/drivers/net/sfc/mcdi.h
+++ b/drivers/net/sfc/mcdi.h
@@ -111,6 +111,7 @@ extern int efx_mcdi_nvram_read(struct efx_nic *efx, unsigned int type,
 extern int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
 				loff_t offset, const u8 *buffer,
 				size_t length);
+#define EFX_MCDI_NVRAM_LEN_MAX 128
 extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
 				loff_t offset, size_t length);
 extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx,
diff --git a/drivers/net/sfc/mtd.c b/drivers/net/sfc/mtd.c
index 3a464529a46b..407bbaddfea6 100644
--- a/drivers/net/sfc/mtd.c
+++ b/drivers/net/sfc/mtd.c
@@ -23,7 +23,6 @@
 #include "mcdi_pcol.h"
 
 #define EFX_SPI_VERIFY_BUF_LEN 16
-#define EFX_MCDI_CHUNK_LEN 128
 
 struct efx_mtd_partition {
 	struct mtd_info mtd;
@@ -428,7 +427,7 @@ static int siena_mtd_read(struct mtd_info *mtd, loff_t start,
 	int rc = 0;
 
 	while (offset < end) {
-		chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+		chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
 		rc = efx_mcdi_nvram_read(efx, part->mcdi.nvram_type, offset,
 					 buffer, chunk);
 		if (rc)
@@ -491,7 +490,7 @@ static int siena_mtd_write(struct mtd_info *mtd, loff_t start,
 	}
 
 	while (offset < end) {
-		chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+		chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
 		rc = efx_mcdi_nvram_write(efx, part->mcdi.nvram_type, offset,
 					  buffer, chunk);
 		if (rc)
-- 
cgit v1.2.3


From 39d321577405e8e269fd238b278aaf2425fa788a Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon, 25 Jan 2010 15:51:01 -0800
Subject: virtio_net: Make delayed refill more reliable

I have seen RX stalls on a machine that experienced a suspected
OOM.  After the stall, the RX buffer is empty on the guest side
and there are exactly 16 entries available on the host side.  As
the number of entries is less than that required by a maximal
skb, the host cannot proceed.

The guest did not have a refill job scheduled.

My diagnosis is that an OOM had occured, with the delayed refill
job scheduled.  The job was able to allocate at least one skb, but
not enough to overcome the minimum required by the host to proceed.

As the refill job would only reschedule itself if it failed completely
to allocate any skbs, this would lead to an RX stall.

The following patch removes this stall possibility by always
rescheduling the refill job until the ring is totally refilled.

Testing has shown that the RX stall no longer occurs whereas
previously it would occur within a day.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/virtio_net.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c708ecc3cb2e..9ead30bd00c4 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -395,8 +395,7 @@ static void refill_work(struct work_struct *work)
 
 	vi = container_of(work, struct virtnet_info, refill.work);
 	napi_disable(&vi->napi);
-	try_fill_recv(vi, GFP_KERNEL);
-	still_empty = (vi->num == 0);
+	still_empty = !try_fill_recv(vi, GFP_KERNEL);
 	napi_enable(&vi->napi);
 
 	/* In theory, this can happen: if we don't get any buffers in
-- 
cgit v1.2.3


From b747caf365b4121903b26d1cd65454c7bc607184 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 26 Jan 2010 05:17:00 -0800
Subject: ariadne: Fix build.

References removed HAVE_MULTICAST.

Reporeted-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ariadne.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c
index c35af3e106b1..e2c202493fa7 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ariadne.c
@@ -123,9 +123,7 @@ static void ariadne_reset(struct net_device *dev);
 static irqreturn_t ariadne_interrupt(int irq, void *data);
 static int ariadne_close(struct net_device *dev);
 static struct net_device_stats *ariadne_get_stats(struct net_device *dev);
-#ifdef HAVE_MULTICAST
 static void set_multicast_list(struct net_device *dev);
-#endif
 
 
 static void memcpyw(volatile u_short *dest, u_short *src, int len)
-- 
cgit v1.2.3


From 56007a028c51cbf800a6c969d6f6431d23443b99 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 26 Jan 2010 14:19:52 +0100
Subject: mac80211: wait for beacon before enabling powersave

Because DTIM information is required for powersave
but is only conveyed in beacons, wait for a beacon
before enabling powersave, and change the way the
information is conveyed to the driver accordingly.

mwl8k doesn't currently seem to implement PS but
requires the DTIM period in a different way; after
talking to Lennert we agreed to just have mwl8k do
the parsing itself in the finalize_join work.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-power.c  |  2 +-
 drivers/net/wireless/mwl8k.c              | 14 +++++++++-----
 drivers/net/wireless/wl12xx/wl1251.h      |  3 ---
 drivers/net/wireless/wl12xx/wl1251_main.c | 25 +++++++------------------
 include/net/mac80211.h                    |  7 ++++++-
 net/mac80211/mlme.c                       | 27 ++++++++++++++++++++++++---
 net/mac80211/scan.c                       |  4 ----
 7 files changed, 47 insertions(+), 35 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 8599444bef01..9e3ca0641451 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -319,7 +319,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
 
 	if (priv->vif)
-		dtimper = priv->vif->bss_conf.dtim_period;
+		dtimper = priv->hw->conf.ps_dtim_period;
 	else
 		dtimper = 1;
 
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 68546ca0ba37..f0f08f3919cc 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3881,12 +3881,16 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 	struct mwl8k_priv *priv =
 		container_of(work, struct mwl8k_priv, finalize_join_worker);
 	struct sk_buff *skb = priv->beacon_skb;
-	struct mwl8k_vif *mwl8k_vif;
+	struct ieee80211_mgmt *mgmt = (void *)skb->data;
+	int len = skb->len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
+	const u8 *tim = cfg80211_find_ie(WLAN_EID_TIM,
+					 mgmt->u.beacon.variable, len);
+	int dtim_period = 1;
+
+	if (tim && tim[1] >= 2)
+		dtim_period = tim[3];
 
-	mwl8k_vif = mwl8k_first_vif(priv);
-	if (mwl8k_vif != NULL)
-		mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len,
-					mwl8k_vif->vif->bss_conf.dtim_period);
+	mwl8k_cmd_finalize_join(priv->hw, skb->data, skb->len, dtim_period);
 
 	dev_kfree_skb(skb);
 	priv->beacon_skb = NULL;
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 6301578d1565..37c61c19cae5 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -341,9 +341,6 @@ struct wl1251 {
 	/* Are we currently scanning */
 	bool scanning;
 
-	/* Our association ID */
-	u16 aid;
-
 	/* Default key (for WEP) */
 	u32 default_key;
 
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 595f0f94d16e..a717dde4822e 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -617,10 +617,13 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 
 		wl->psm_requested = true;
 
+		wl->dtim_period = conf->ps_dtim_period;
+
+		ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
+						  wl->dtim_period);
+
 		/*
-		 * We enter PSM only if we're already associated.
-		 * If we're not, we'll enter it when joining an SSID,
-		 * through the bss_info_changed() hook.
+		 * mac80211 enables PSM only if we're already associated.
 		 */
 		ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
 		if (ret < 0)
@@ -943,7 +946,6 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 				       struct ieee80211_bss_conf *bss_conf,
 				       u32 changed)
 {
-	enum wl1251_cmd_ps_mode mode;
 	struct wl1251 *wl = hw->priv;
 	struct sk_buff *beacon, *skb;
 	int ret;
@@ -984,11 +986,6 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->beacon_int = bss_conf->beacon_int;
-			wl->dtim_period = bss_conf->dtim_period;
-
-			ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
-							  wl->dtim_period);
-			wl->aid = bss_conf->aid;
 
 			skb = ieee80211_pspoll_get(wl->hw, wl->vif);
 			if (!skb)
@@ -1001,17 +998,9 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 			if (ret < 0)
 				goto out_sleep;
 
-			ret = wl1251_acx_aid(wl, wl->aid);
+			ret = wl1251_acx_aid(wl, bss_conf->aid);
 			if (ret < 0)
 				goto out_sleep;
-
-			/* If we want to go in PSM but we're not there yet */
-			if (wl->psm_requested && !wl->psm) {
-				mode = STATION_POWER_SAVE_MODE;
-				ret = wl1251_ps_set_mode(wl, mode);
-				if (ret < 0)
-					goto out_sleep;
-			}
 		} else {
 			/* use defaults when not associated */
 			wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f64402f6312b..1e9c93024cf2 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -186,7 +186,8 @@ enum ieee80211_bss_change {
  * @use_short_slot: use short slot time (only relevant for ERP);
  *	if the hardware cannot handle this it must set the
  *	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
- * @dtim_period: num of beacons before the next DTIM, for PSM
+ * @dtim_period: num of beacons before the next DTIM, for beaconing,
+ *	not valid in station mode (cf. hw conf ps_dtim_period)
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
@@ -648,6 +649,9 @@ enum ieee80211_smps_mode {
  *	value will be only achievable between DTIM frames, the hardware
  *	needs to check for the multicast traffic bit in DTIM beacons.
  *	This variable is valid only when the CONF_PS flag is set.
+ * @ps_dtim_period: The DTIM period of the AP we're connected to, for use
+ *	in power saving. Power saving will not be enabled until a beacon
+ *	has been received and the DTIM period is known.
  * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
  *	powersave documentation below. This variable is valid only when
  *	the CONF_PS flag is set.
@@ -674,6 +678,7 @@ struct ieee80211_conf {
 	int max_sleep_period;
 
 	u16 listen_interval;
+	u8 ps_dtim_period;
 
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 1e1d16c55ee5..86c6ad1b058d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -484,6 +484,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
 
 	if (count == 1 && found->u.mgd.powersave &&
 	    found->u.mgd.associated &&
+	    found->u.mgd.associated->beacon_ies &&
 	    !(found->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
 				    IEEE80211_STA_CONNECTION_POLL))) {
 		s32 beaconint_us;
@@ -497,14 +498,22 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
 		if (beaconint_us > latency) {
 			local->ps_sdata = NULL;
 		} else {
-			u8 dtimper = found->vif.bss_conf.dtim_period;
+			struct ieee80211_bss *bss;
 			int maxslp = 1;
+			u8 dtimper;
 
-			if (dtimper > 1)
+			bss = (void *)found->u.mgd.associated->priv;
+			dtimper = bss->dtim_period;
+
+			/* If the TIM IE is invalid, pretend the value is 1 */
+			if (!dtimper)
+				dtimper = 1;
+			else if (dtimper > 1)
 				maxslp = min_t(int, dtimper,
 						    latency / beaconint_us);
 
 			local->hw.conf.max_sleep_period = maxslp;
+			local->hw.conf.ps_dtim_period = dtimper;
 			local->ps_sdata = found;
 		}
 	} else {
@@ -702,7 +711,6 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	/* set timing information */
 	sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
 	sdata->vif.bss_conf.timestamp = cbss->tsf;
-	sdata->vif.bss_conf.dtim_period = bss->dtim_period;
 
 	bss_info_changed |= BSS_CHANGED_BEACON_INT;
 	bss_info_changed |= ieee80211_handle_bss_capability(sdata,
@@ -1168,6 +1176,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 	int freq;
 	struct ieee80211_bss *bss;
 	struct ieee80211_channel *channel;
+	bool need_ps = false;
+
+	if (sdata->u.mgd.associated) {
+		bss = (void *)sdata->u.mgd.associated->priv;
+		/* not previously set so we may need to recalc */
+		need_ps = !bss->dtim_period;
+	}
 
 	if (elems->ds_params && elems->ds_params_len == 1)
 		freq = ieee80211_channel_to_frequency(elems->ds_params[0]);
@@ -1187,6 +1202,12 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 	if (!sdata->u.mgd.associated)
 		return;
 
+	if (need_ps) {
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
+	}
+
 	if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) &&
 	    (memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid,
 							ETH_ALEN) == 0)) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 9afe2f9885dc..bc061f629674 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -111,10 +111,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 		bss->dtim_period = tim_ie->dtim_period;
 	}
 
-	/* set default value for buggy AP/no TIM element */
-	if (bss->dtim_period == 0)
-		bss->dtim_period = 1;
-
 	bss->supp_rates_len = 0;
 	if (elems->supp_rates) {
 		clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
-- 
cgit v1.2.3


From c928febf4bc703ea542340e5a208e0445d998839 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Tue, 26 Jan 2010 18:27:09 +0000
Subject: starfire: clean up properly if firmware loading fails

netdev_open() will return without cleaning up net device or hardware state
if firmware loading fails.  This results in a BUG() on a second attempt to
bring the interface up, reported in
<http://bugzilla.kernel.org/show_bug.cgi?id=15091>, and probably has even
worse effects if the driver is removed afterwards.

Call netdev_close() to clean up on failure.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Reported-by: Michael Moffatt <michael@moffatt.org.nz>
Tested-by: Michael Moffatt <michael@moffatt.org.nz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/starfire.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 95db60adde41..f9521136a869 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1063,7 +1063,7 @@ static int netdev_open(struct net_device *dev)
 	if (retval) {
 		printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
 		       FIRMWARE_RX);
-		return retval;
+		goto out_init;
 	}
 	if (fw_rx->size % 4) {
 		printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
@@ -1108,6 +1108,9 @@ out_tx:
 	release_firmware(fw_tx);
 out_rx:
 	release_firmware(fw_rx);
+out_init:
+	if (retval)
+		netdev_close(dev);
 	return retval;
 }
 
-- 
cgit v1.2.3


From 47db3a677b533489d1a5a027282aa33f46dffa79 Mon Sep 17 00:00:00 2001
From: Luca Verdesca <magooz@salug.it>
Date: Tue, 22 Dec 2009 18:10:01 +0100
Subject: ath5k: adding LED support for AR5BXB63 cards

With following patch, LED should now work with LiteOn AR5BXB63 mini
pci-e cards.

(Broken patch fixed-up by me...let's hope I did it right! -- JWL)

Signed-off-by: Luca Verdesca <magooz@salug.it>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/led.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 60f547503d75..67aa52e9bf94 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -77,6 +77,8 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
 	/* HP Compaq C700 (nitrousnrg@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
+	/* LiteOn AR5BXB63 (magooz@salug.it) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_ATHEROS, 0x3067), ATH_LED(3, 0) },
 	/* IBM-specific AR5212 (all others) */
 	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
 	/* Dell Vostro A860 (shahar@shahar-or.co.il) */
-- 
cgit v1.2.3


From d3d5621abf6d2105700795fcbdf784b9cb46b495 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Wed, 27 Jan 2010 14:23:17 -0500
Subject: libertas: add comment re: v10 firmware key handling

Comment text suggested by Dan Williams <dcbw@redhat.com> in
<1263952092.4481.2.camel@localhost.localdomain>.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/assoc.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 0979b07799a0..f03d5e4e59c3 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -2062,6 +2062,11 @@ void lbs_association_worker(struct work_struct *work)
 			goto out;
 	}
 
+	/*
+	 * v10 FW wants WPA keys to be set/cleared before WEP key operations,
+	 * otherwise it will fail to correctly associate to WEP networks.
+	 * Other firmware versions don't appear to care.
+	 */
 	if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags) ||
 	    test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
 		ret = assoc_helper_wpa_keys(priv, assoc_req);
-- 
cgit v1.2.3


From d2bb8e02810cc5844fe2bd5a81d4058b8afe6de9 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 26 Jan 2010 16:22:20 -0500
Subject: rtl8180: implement get_tsf op for mac80211

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 5a2b7199f5d5..109ab1baf625 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -761,6 +761,14 @@ static void rtl8180_configure_filter(struct ieee80211_hw *dev,
 	rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
 }
 
+static u64 rtl8180_get_tsf(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
 static const struct ieee80211_ops rtl8180_ops = {
 	.tx			= rtl8180_tx,
 	.start			= rtl8180_start,
@@ -771,6 +779,7 @@ static const struct ieee80211_ops rtl8180_ops = {
 	.bss_info_changed	= rtl8180_bss_info_changed,
 	.prepare_multicast	= rtl8180_prepare_multicast,
 	.configure_filter	= rtl8180_configure_filter,
+	.get_tsf		= rtl8180_get_tsf,
 };
 
 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-- 
cgit v1.2.3


From da8604757b1cdf79f24e118b156349543eb1b722 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 26 Jan 2010 16:42:02 -0600
Subject: b43: N PHY: Fix compilation after removal of typdef b43_c32

In the conversion between typedef and struct, two places that needed a "struct"
were missed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index df4bf435e218..8c39fb126d4f 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -822,7 +822,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 {
 	int i;
 	u16 bw, len, rot, angle;
-	b43_c32 *samples;
+	struct b43_c32 *samples;
 
 
 	bw = (dev->phy.is_40mhz) ? 40 : 20;
@@ -840,7 +840,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 		len = bw << 1;
 	}
 
-	samples = kzalloc(len * sizeof(b43_c32), GFP_KERNEL);
+	samples = kzalloc(len * sizeof(struct b43_c32), GFP_KERNEL);
 	rot = (((freq * 36) / bw) << 16) / 100;
 	angle = 0;
 
-- 
cgit v1.2.3


From 22e16e55e36ab91148592c9bf0f2444bf766cd3c Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 26 Jan 2010 17:45:28 -0600
Subject: rtl8187: Add callback for get_tsf

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187_dev.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index f336c63053c1..a05382557789 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1265,6 +1265,14 @@ static int rtl8187_conf_tx(struct ieee80211_hw *dev, u16 queue,
 	return 0;
 }
 
+static u64 rtl8187_get_tsf(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
 static const struct ieee80211_ops rtl8187_ops = {
 	.tx			= rtl8187_tx,
 	.start			= rtl8187_start,
@@ -1276,7 +1284,8 @@ static const struct ieee80211_ops rtl8187_ops = {
 	.prepare_multicast	= rtl8187_prepare_multicast,
 	.configure_filter	= rtl8187_configure_filter,
 	.conf_tx		= rtl8187_conf_tx,
-	.rfkill_poll		= rtl8187_rfkill_poll
+	.rfkill_poll		= rtl8187_rfkill_poll,
+	.get_tsf		= rtl8187_get_tsf,
 };
 
 static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-- 
cgit v1.2.3


From 7b139c83c590d4965259aad8889cbb08104b2891 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitk@serverengines.com>
Date: Wed, 27 Jan 2010 21:56:44 +0000
Subject: be2net: Bug fix to support newer generation of BE ASIC

Bug fix in be2net for newer generation of BladeEngine ASIC.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      |  5 +++++
 drivers/net/benet/be_cmds.h |  3 ++-
 drivers/net/benet/be_main.c | 25 +++++++++++++++++++++++--
 3 files changed, 30 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 9fd8e5ecd5d7..5bc74590c73e 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -276,8 +276,13 @@ struct be_adapter {
 	int link_speed;
 	u8 port_type;
 	u8 transceiver;
+	u8 generation;		/* BladeEngine ASIC generation */
 };
 
+/* BladeEngine Generation numbers */
+#define BE_GEN2 2
+#define BE_GEN3 3
+
 extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index c002b8391b4d..13b33c841083 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -164,7 +164,8 @@ struct be_cmd_req_hdr {
 	u8 domain;		/* dword 0 */
 	u32 timeout;		/* dword 1 */
 	u32 request_length;	/* dword 2 */
-	u32 rsvd;		/* dword 3 */
+	u8 version;		/* dword 3 */
+	u8 rsvd[3];		/* dword 3 */
 };
 
 #define RESP_HDR_INFO_OPCODE_SHIFT	0	/* bits 0 - 7 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 33ab8c7f14fe..90c5661b336f 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -2051,6 +2051,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter)
 static int be_map_pci_bars(struct be_adapter *adapter)
 {
 	u8 __iomem *addr;
+	int pcicfg_reg;
 
 	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
 			pci_resource_len(adapter->pdev, 2));
@@ -2064,8 +2065,13 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 		goto pci_map_err;
 	adapter->db = addr;
 
-	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
-			pci_resource_len(adapter->pdev, 1));
+	if (adapter->generation == BE_GEN2)
+		pcicfg_reg = 1;
+	else
+		pcicfg_reg = 0;
+
+	addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg),
+			pci_resource_len(adapter->pdev, pcicfg_reg));
 	if (addr == NULL)
 		goto pci_map_err;
 	adapter->pcicfg = addr;
@@ -2162,6 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter)
 	cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
 	if (cmd->va == NULL)
 		return -1;
+	memset(cmd->va, cmd->size, 0);
 	return 0;
 }
 
@@ -2240,6 +2247,20 @@ static int __devinit be_probe(struct pci_dev *pdev,
 		goto rel_reg;
 	}
 	adapter = netdev_priv(netdev);
+
+	switch (pdev->device) {
+	case BE_DEVICE_ID1:
+	case OC_DEVICE_ID1:
+		adapter->generation = BE_GEN2;
+		break;
+	case BE_DEVICE_ID2:
+	case OC_DEVICE_ID2:
+		adapter->generation = BE_GEN3;
+		break;
+	default:
+		adapter->generation = 0;
+	}
+
 	adapter->pdev = pdev;
 	pci_set_drvdata(pdev, adapter);
 	adapter->netdev = netdev;
-- 
cgit v1.2.3


From aeedba8bd2cf2f6f7b45bc7853754a03bc926797 Mon Sep 17 00:00:00 2001
From: "Choi, David" <David.Choi@Micrel.Com>
Date: Wed, 27 Jan 2010 06:03:16 +0000
Subject: drivers/net: ks8851_mll ethernet network driver

Hello David Miller,

I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6.

>From : David J. Choi <david.choi@micrel.com>

Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq().

Signed-off-by : David J. Choi <david.choi@micrel.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ks8851_mll.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index c146304d8d6c..c0ceebccaa49 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
 
 static irqreturn_t ks_irq(int irq, void *pw)
 {
-	struct ks_net *ks = pw;
-	struct net_device *netdev = ks->netdev;
+	struct net_device *netdev = pw;
+	struct ks_net *ks = netdev_priv(netdev);
 	u16 status;
 
 	/*this should be the first in IRQ handler */
-- 
cgit v1.2.3


From ac26d7d6aca9621f75f6954c159d2727c9c9cbd0 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Wed, 27 Jan 2010 15:30:39 +0000
Subject: igbvf: fix issue w/ mapped_as_page being left set after unmap

This change fixes an issue in igbvf with mapped_as_page being left set
after a page is unmapped which results in buffers which are mapped via map
single being unmapped as page.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igbvf/netdev.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 297a5ddd77f0..2aa71a766c35 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2117,6 +2117,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
+	buffer_info->mapped_as_page = false;
 	buffer_info->dma = pci_map_single(pdev, skb->data, len,
 					  PCI_DMA_TODEVICE);
 	if (pci_dma_mapping_error(pdev, buffer_info->dma))
-- 
cgit v1.2.3


From ebe1b30cd441b576fb9d0b42857af3e423dd5826 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Wed, 27 Jan 2010 16:37:44 +0000
Subject: ixgbe: set the correct DCB bit for pg tx settings

Set the correct bit BIT_PG_TX when tx PG settings are set.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 56f37f66b696..383e799c5fed 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
 
 	if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
 	    adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
-		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_PG_TX;
 		adapter->dcb_set_bitmap |= BIT_RESETLINK;
 	}
 }
-- 
cgit v1.2.3


From 3ce1cc52d2e76b6a6b9d0b52b70eb181497efa50 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Wed, 27 Jan 2010 16:38:06 +0000
Subject: ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early

Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that
we can learn if this is going to fail as early as possible.  Previously,
ixgbe_down or ixgbe_close were being called before this check and the
IXGBE_RESETTING bit was being set and cleared.  Worse if this failed
the corresponding ixgbe_up/ndo_open would not called.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_dcb_nl.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 383e799c5fed..dd4883f642be 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 	if (!adapter->dcb_set_bitmap)
 		return DCB_NO_HW_CHG;
 
+	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+				 adapter->ring_feature[RING_F_DCB].indices);
+
+	if (ret)
+		return DCB_NO_HW_CHG;
+
 	/*
 	 * Only take down the adapter if the configuration change
 	 * requires a reset.
@@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 		}
 	}
 
-	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
-				 adapter->ring_feature[RING_F_DCB].indices);
-	if (ret) {
-		if (adapter->dcb_set_bitmap & BIT_RESETLINK)
-			clear_bit(__IXGBE_RESETTING, &adapter->state);
-		return DCB_NO_HW_CHG;
-	}
-
 	if (adapter->dcb_cfg.pfc_mode_enable) {
 		if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
 			(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
-- 
cgit v1.2.3


From b473946a0853860e13b51c28add5524741117786 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Mon, 25 Jan 2010 23:34:15 +0000
Subject: bonding: bond_open error return value

The convention for API functions in kernel is to return errno value;
bond_open would return -1 if alb setup failed. The only reason that
could happen is if kmalloc() failed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3f0071cfe56b..efa0e41bf3ec 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3639,7 +3639,7 @@ static int bond_open(struct net_device *bond_dev)
 		 */
 		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
 			/* something went wrong - fail the open operation */
-			return -1;
+			return -ENOMEM;
 		}
 
 		INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
-- 
cgit v1.2.3


From 257ddbdad13cd3c4f7d03b85af632c508aa8abc9 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Wed, 27 Jan 2010 10:17:41 +0000
Subject: netdev: remove HAVE_ leftovers

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c                     |  4 ++--
 drivers/net/bnx2x_main.c               |  4 ++--
 drivers/net/cassini.c                  |  2 +-
 drivers/net/ixgbevf/ixgbevf_main.c     | 18 ------------------
 drivers/net/meth.c                     |  3 ---
 drivers/staging/wlags49_h2/wl_netdev.c |  6 ------
 6 files changed, 5 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a7b6b12c1c05..5917b941aca2 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7668,7 +7668,7 @@ bnx2_change_mtu(struct net_device *dev, int new_mtu)
 	return (bnx2_change_ring_size(bp, bp->rx_ring_size, bp->tx_ring_size));
 }
 
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
 static void
 poll_bnx2(struct net_device *dev)
 {
@@ -8280,7 +8280,7 @@ static const struct net_device_ops bnx2_netdev_ops = {
 #ifdef BCM_VLAN
 	.ndo_vlan_rx_register	= bnx2_vlan_rx_register,
 #endif
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= poll_bnx2,
 #endif
 };
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ca4ed634d55e..ffc7381969ae 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -11731,7 +11731,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev,
 
 #endif
 
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
 static void poll_bnx2x(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -11755,7 +11755,7 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 #ifdef BCM_VLAN
 	.ndo_vlan_rx_register	= bnx2x_vlan_rx_register,
 #endif
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= poll_bnx2x,
 #endif
 };
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index b3a038c23af1..ad47e5126fde 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -106,7 +106,7 @@
 #define cas_page_unmap(x)    kunmap_atomic((x), KM_SKB_DATA_SOFTIRQ)
 #define CAS_NCPUS            num_online_cpus()
 
-#if defined(CONFIG_CASSINI_NAPI) && defined(HAVE_NETDEV_POLL)
+#ifdef CONFIG_CASSINI_NAPI
 #define USE_NAPI
 #define cas_skb_release(x)  netif_receive_skb(x)
 #else
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 7b3af107ca84..b9f10d05049d 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -3262,7 +3262,6 @@ static void ixgbevf_shutdown(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-#ifdef HAVE_NET_DEVICE_OPS
 static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_open		= &ixgbevf_open,
 	.ndo_stop		= &ixgbevf_close,
@@ -3278,29 +3277,12 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_vlan_rx_add_vid	= &ixgbevf_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= &ixgbevf_vlan_rx_kill_vid,
 };
-#endif /* HAVE_NET_DEVICE_OPS */
 
 static void ixgbevf_assign_netdev_ops(struct net_device *dev)
 {
 	struct ixgbevf_adapter *adapter;
 	adapter = netdev_priv(dev);
-#ifdef HAVE_NET_DEVICE_OPS
 	dev->netdev_ops = &ixgbe_netdev_ops;
-#else /* HAVE_NET_DEVICE_OPS */
-	dev->open = &ixgbevf_open;
-	dev->stop = &ixgbevf_close;
-
-	dev->hard_start_xmit = &ixgbevf_xmit_frame;
-
-	dev->get_stats = &ixgbevf_get_stats;
-	dev->set_multicast_list = &ixgbevf_set_rx_mode;
-	dev->set_mac_address = &ixgbevf_set_mac;
-	dev->change_mtu = &ixgbevf_change_mtu;
-	dev->tx_timeout = &ixgbevf_tx_timeout;
-	dev->vlan_rx_register = &ixgbevf_vlan_rx_register;
-	dev->vlan_rx_add_vid = &ixgbevf_vlan_rx_add_vid;
-	dev->vlan_rx_kill_vid = &ixgbevf_vlan_rx_kill_vid;
-#endif /* HAVE_NET_DEVICE_OPS */
 	ixgbevf_set_ethtool_ops(dev);
 	dev->watchdog_timeo = 5 * HZ;
 }
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 2af81735386b..9f72cb45f4af 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -51,14 +51,11 @@
 
 static const char *meth_str="SGI O2 Fast Ethernet";
 
-#define HAVE_TX_TIMEOUT
 /* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */
 #define TX_TIMEOUT (400*HZ/1000)
 
-#ifdef HAVE_TX_TIMEOUT
 static int timeout = TX_TIMEOUT;
 module_param(timeout, int, 0);
-#endif
 
 /*
  * This structure is private to each device. It is used to pass
diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c
index ac3890247965..0d22e3692fe5 100644
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -1194,9 +1194,7 @@ static const struct net_device_ops wl_netdev_ops =
     .ndo_stop               = &wl_adapter_close,
     .ndo_do_ioctl           = &wl_ioctl,
 
-#ifdef HAVE_TX_TIMEOUT
     .ndo_tx_timeout         = &wl_tx_timeout,
-#endif
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
     .ndo_poll_controller    = wl_poll,
@@ -1270,9 +1268,7 @@ struct net_device * wl_device_alloc( void )
     dev->stop               = &wl_adapter_close;
     dev->do_ioctl           = &wl_ioctl;
 
-#ifdef HAVE_TX_TIMEOUT
     dev->tx_timeout         = &wl_tx_timeout;
-#endif
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
     dev->poll_controller = wl_poll;
@@ -1280,9 +1276,7 @@ struct net_device * wl_device_alloc( void )
 
 #endif // (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,30))
 
-#ifdef HAVE_TX_TIMEOUT
     dev->watchdog_timeo     = TX_TIMEOUT;
-#endif
 
     dev->ethtool_ops	    = &wl_ethtool_ops;
 
-- 
cgit v1.2.3


From ce96bc86bf2ee12e8a3bf461ca8027557c1ef42f Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 28 Jan 2010 06:13:13 -0800
Subject: net: merge fixup for qlge_main

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 4adca94a521f..5be3ae2f5a16 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4499,7 +4499,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 		if (qdev->mpi_coredump == NULL) {
 			dev_err(&pdev->dev, "Coredump alloc failed.\n");
 			err = -ENOMEM;
-			goto err_out;
+			goto err_out2;
 		}
 		if (qlge_force_coredump)
 			set_bit(QL_FRC_COREDUMP, &qdev->flags);
-- 
cgit v1.2.3


From c1596b75c29eb5b32c65ef1e186c8b08c289bf05 Mon Sep 17 00:00:00 2001
From: Hamish Guthrie <hamish.guthrie@sonycom.com>
Date: Thu, 28 Jan 2010 12:54:09 +0100
Subject: ps3_gelic_wireless: Remove PS3 gelic legacy wpa support

The current PS3 gelic wireless driver has support for wireless
extensions. The original PS3 gelic wireless driver exposed a
dedicated API for a dedicated wpa_supplicant driver. This old
API could be enabled with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE,
however, as this is not being used by any distros, and it is being
removed from the driver and from wpa_supplicant.

Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 arch/powerpc/configs/ppc64_defconfig |   1 -
 arch/powerpc/configs/ps3_defconfig   |   1 -
 drivers/net/Kconfig                  |  14 ----
 drivers/net/ps3_gelic_wireless.c     | 137 -----------------------------------
 4 files changed, 153 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 252401824575..070587ae4f74 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1000,7 +1000,6 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 CONFIG_GELIC_NET=m
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7de127e4ceef..32f7058bb173 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -593,7 +593,6 @@ CONFIG_MII=m
 CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 18ff622703be..6460505ab24c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2354,20 +2354,6 @@ config GELIC_WIRELESS
 	  the driver automatically distinguishes the models, you can
 	  safely enable this option even if you have a wireless-less model.
 
-config GELIC_WIRELESS_OLD_PSK_INTERFACE
-       bool "PS3 Wireless private PSK interface (OBSOLETE)"
-       depends on GELIC_WIRELESS
-       select WEXT_PRIV
-       help
-          This option retains the obsolete private interface to pass
-          the PSK from user space programs to the driver.  The PSK
-          stands for 'Pre Shared Key' and is used for WPA[2]-PSK
-          (WPA-Personal) environment.
-          If WPA[2]-PSK is used and you need to use old programs that
-          support only this old interface, say Y.  Otherwise N.
-
-          If unsure, say N.
-
 config FSL_PQ_MDIO
 	tristate "Freescale PQ MDIO"
 	depends on FSL_SOC
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 227b141c4fbd..7571dbba6a0a 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1389,113 +1389,6 @@ static int gelic_wl_get_mode(struct net_device *netdev,
 	return 0;
 }
 
-#ifdef CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE
-/* SIOCIWFIRSTPRIV */
-static int hex2bin(u8 *str, u8 *bin, unsigned int len)
-{
-	unsigned int i;
-	static unsigned char *hex = "0123456789ABCDEF";
-	unsigned char *p, *q;
-	u8 tmp;
-
-	if (len != WPA_PSK_LEN * 2)
-		return -EINVAL;
-
-	for (i = 0; i < WPA_PSK_LEN * 2; i += 2) {
-		p = strchr(hex, toupper(str[i]));
-		q = strchr(hex, toupper(str[i + 1]));
-		if (!p || !q) {
-			pr_info("%s: unconvertible PSK digit=%d\n",
-				__func__, i);
-			return -EINVAL;
-		}
-		tmp = ((p - hex) << 4) + (q - hex);
-		*bin++ = tmp;
-	}
-	return 0;
-};
-
-static int gelic_wl_priv_set_psk(struct net_device *net_dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *data, char *extra)
-{
-	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
-	unsigned int len;
-	unsigned long irqflag;
-	int ret = 0;
-
-	pr_debug("%s:<- len=%d\n", __func__, data->data.length);
-	len = data->data.length - 1;
-	if (len <= 2)
-		return -EINVAL;
-
-	spin_lock_irqsave(&wl->lock, irqflag);
-	if (extra[0] == '"' && extra[len - 1] == '"') {
-		pr_debug("%s: passphrase mode\n", __func__);
-		/* pass phrase */
-		if (GELIC_WL_EURUS_PSK_MAX_LEN < (len - 2)) {
-			pr_info("%s: passphrase too long\n", __func__);
-			ret = -E2BIG;
-			goto out;
-		}
-		memset(wl->psk, 0, sizeof(wl->psk));
-		wl->psk_len = len - 2;
-		memcpy(wl->psk, &(extra[1]), wl->psk_len);
-		wl->psk_type = GELIC_EURUS_WPA_PSK_PASSPHRASE;
-	} else {
-		ret = hex2bin(extra, wl->psk, len);
-		if (ret)
-			goto out;
-		wl->psk_len = WPA_PSK_LEN;
-		wl->psk_type = GELIC_EURUS_WPA_PSK_BIN;
-	}
-	set_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat);
-out:
-	spin_unlock_irqrestore(&wl->lock, irqflag);
-	pr_debug("%s:->\n", __func__);
-	return ret;
-}
-
-static int gelic_wl_priv_get_psk(struct net_device *net_dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *data, char *extra)
-{
-	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
-	char *p;
-	unsigned long irqflag;
-	unsigned int i;
-
-	pr_debug("%s:<-\n", __func__);
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	spin_lock_irqsave(&wl->lock, irqflag);
-	p = extra;
-	if (test_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat)) {
-		if (wl->psk_type == GELIC_EURUS_WPA_PSK_BIN) {
-			for (i = 0; i < wl->psk_len; i++) {
-				sprintf(p, "%02xu", wl->psk[i]);
-				p += 2;
-			}
-			*p = '\0';
-			data->data.length = wl->psk_len * 2;
-		} else {
-			*p++ = '"';
-			memcpy(p, wl->psk, wl->psk_len);
-			p += wl->psk_len;
-			*p++ = '"';
-			*p = '\0';
-			data->data.length = wl->psk_len + 2;
-		}
-	} else
-		/* no psk set */
-		data->data.length = 0;
-	spin_unlock_irqrestore(&wl->lock, irqflag);
-	pr_debug("%s:-> %d\n", __func__, data->data.length);
-	return 0;
-}
-#endif
-
 /* SIOCGIWNICKN */
 static int gelic_wl_get_nick(struct net_device *net_dev,
 				  struct iw_request_info *info,
@@ -2406,40 +2299,10 @@ static const iw_handler gelic_wl_wext_handler[] =
 	IW_IOCTL(SIOCGIWNICKN)		= gelic_wl_get_nick,
 };
 
-#ifdef CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE
-static struct iw_priv_args gelic_wl_private_args[] =
-{
-	{
-		.cmd = GELIC_WL_PRIV_SET_PSK,
-		.set_args = IW_PRIV_TYPE_CHAR |
-		(GELIC_WL_EURUS_PSK_MAX_LEN + 2),
-		.name = "set_psk"
-	},
-	{
-		.cmd = GELIC_WL_PRIV_GET_PSK,
-		.get_args = IW_PRIV_TYPE_CHAR |
-		(GELIC_WL_EURUS_PSK_MAX_LEN + 2),
-		.name = "get_psk"
-	}
-};
-
-static const iw_handler gelic_wl_private_handler[] =
-{
-	gelic_wl_priv_set_psk,
-	gelic_wl_priv_get_psk,
-};
-#endif
-
 static const struct iw_handler_def gelic_wl_wext_handler_def = {
 	.num_standard		= ARRAY_SIZE(gelic_wl_wext_handler),
 	.standard		= gelic_wl_wext_handler,
 	.get_wireless_stats	= gelic_wl_get_wireless_stats,
-#ifdef CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE
-	.num_private		= ARRAY_SIZE(gelic_wl_private_handler),
-	.num_private_args	= ARRAY_SIZE(gelic_wl_private_args),
-	.private		= gelic_wl_private_handler,
-	.private_args		= gelic_wl_private_args,
-#endif
 };
 
 static struct net_device * __devinit gelic_wl_alloc(struct gelic_card *card)
-- 
cgit v1.2.3


From f276586a8af410d2b79733daf52471605b6559e9 Mon Sep 17 00:00:00 2001
From: Hamish Guthrie <hamish.guthrie@sonycom.com>
Date: Thu, 28 Jan 2010 12:54:10 +0100
Subject: ps3_gelic_wireless: fix directed ssid scan

If the association worker requests a directed ssid scan and a bss list
already exists, the directed scan is not done. This patch corrects this
and cleans up a few typos and debug messages.

Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/ps3_gelic_wireless.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 7571dbba6a0a..d520e9e8cdb2 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1449,7 +1449,8 @@ static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan,
 	void *buf = NULL;
 	size_t len;
 
-	pr_debug("%s: <- always=%d\n", __func__, always_scan);
+	pr_debug("%s: <- always=%d essid_len=%d\n", __func__,
+		 always_scan, essid_len);
 	if (mutex_lock_interruptible(&wl->scan_lock))
 		return -ERESTARTSYS;
 
@@ -1464,8 +1465,10 @@ static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan,
 	init_completion(&wl->scan_done);
 	/*
 	 * If we have already a bss list, don't try to get new
+	 * unless we are doing an ESSID scan
 	 */
-	if (!always_scan && wl->scan_stat == GELIC_WL_SCAN_STAT_GOT_LIST) {
+	if ((!essid_len && !always_scan)
+	    && wl->scan_stat == GELIC_WL_SCAN_STAT_GOT_LIST) {
 		pr_debug("%s: already has the list\n", __func__);
 		complete(&wl->scan_done);
 		goto out;
@@ -1566,7 +1569,7 @@ static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl)
 		}
 	}
 
-	/* put them in the newtork_list */
+	/* put them in the network_list */
 	for (i = 0, scan_info_size = 0, scan_info = buf;
 	     scan_info_size < data_len;
 	     i++, scan_info_size += be16_to_cpu(scan_info->size),
@@ -1902,7 +1905,7 @@ static int gelic_wl_do_wpa_setup(struct gelic_wl_info *wl)
 	/* PSK type */
 	wpa->psk_type = cpu_to_be16(wl->psk_type);
 #ifdef DEBUG
-	pr_debug("%s: sec=%s psktype=%s\nn", __func__,
+	pr_debug("%s: sec=%s psktype=%s\n", __func__,
 		 wpasecstr(wpa->security),
 		 (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ?
 		 "BIN" : "passphrase");
@@ -1912,9 +1915,9 @@ static int gelic_wl_do_wpa_setup(struct gelic_wl_info *wl)
 	 * the debug log because this dumps your precious
 	 * passphrase/key.
 	 */
-	pr_debug("%s: psk=%s\n",
+	pr_debug("%s: psk=%s\n", __func__,
 		 (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ?
-		 (char *)"N/A" : (char *)wpa->psk);
+		 "N/A" : wpa->psk);
 #endif
 #endif
 	/* issue wpa setup */
-- 
cgit v1.2.3


From d291b9af1a1a12f59a464494900c6e0db26e2ec3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 28 Jan 2010 21:36:21 -0800
Subject: be2net: Fix memset() arg ordering.

Noticed by Ben Hutchings.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 90c5661b336f..6f2633887dc3 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -2168,7 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter)
 	cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
 	if (cmd->va == NULL)
 		return -1;
-	memset(cmd->va, cmd->size, 0);
+	memset(cmd->va, 0, cmd->size);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 71cc1fa9f2d71eb2eba9b8e71e27cff9863e55f3 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Thu, 28 Jan 2010 21:37:18 -0800
Subject: cdc_ether: Partially revert "usbnet: Set link down initially ..."

Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down
initially for drivers that update link state") changed the initial link
state in cdc_ether and other drivers based on the understanding that the
devices they support generate link change interrupts.  However, this is
optional in the CDC Ethernet protocol, and two users have reported in
<http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state
for their devices remains down.  Therefore, revert the change in
cdc_ether.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Avi Rozen <avi.rozen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 21e183a83b99..4f27f022fbf7 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -419,7 +419,7 @@ static int cdc_manage_power(struct usbnet *dev, int on)
 
 static const struct driver_info	cdc_info = {
 	.description =	"CDC Ethernet Device",
-	.flags =	FLAG_ETHER | FLAG_LINK_INTR,
+	.flags =	FLAG_ETHER,
 	// .check_connect = cdc_check_connect,
 	.bind =		cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
-- 
cgit v1.2.3


From 1dbfd9d46a6df5232ba0b12d2da950da89eff3da Mon Sep 17 00:00:00 2001
From: Vivek Natarajan <vnatarajan@atheros.com>
Date: Fri, 29 Jan 2010 16:56:51 +0530
Subject: ath9k: Handle full sleep in ps_restore.

IDLE PS (Full Sleep) doesn't work when ifconfig up
is done during Idle unassociated state.
Fix this by restoring FULL SLEEP in ps_restore if CONF_IDLE
is set.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
 drivers/net/wireless/ath/ath9k/main.c  | 8 ++++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bdbcc70df075..3f8a7e773d55 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -480,6 +480,7 @@ struct ath_softc {
 	u8 nbcnvifs;
 	u16 nvifs;
 	bool ps_enabled;
+	bool ps_idle;
 	unsigned long ps_usecount;
 	enum ath9k_int imask;
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6f3e71c5071e..e04835cb21b5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -143,8 +143,10 @@ void ath9k_ps_restore(struct ath_softc *sc)
 	if (--sc->ps_usecount != 0)
 		goto unlock;
 
-	if (sc->ps_enabled &&
-	    !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
+	if (sc->ps_idle)
+		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+	else if (sc->ps_enabled &&
+		 !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
 			      PS_WAIT_FOR_CAB |
 			      PS_WAIT_FOR_PSPOLL_DATA |
 			      PS_WAIT_FOR_TX_ACK)))
@@ -1528,6 +1530,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		spin_unlock_bh(&sc->wiphy_lock);
 
 		if (enable_radio) {
+			sc->ps_idle = false;
 			ath_radio_enable(sc, hw);
 			ath_print(common, ATH_DBG_CONFIG,
 				  "not-idle: enabling radio\n");
@@ -1635,6 +1638,7 @@ skip_chan_change:
 
 	if (disable_radio) {
 		ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
+		sc->ps_idle = true;
 		ath_radio_disable(sc, hw);
 	}
 
-- 
cgit v1.2.3


From 49dcc819b077c2d473062e17d5a1373a8b660e02 Mon Sep 17 00:00:00 2001
From: Daniel Halperin <dhalperi@cs.washington.edu>
Date: Tue, 19 Jan 2010 10:22:19 -0800
Subject: iwlwifi: optimize power saving

In hostap AP mode, every time the client sends the AP
a packet the STA_NOTIFY_AWAKE code is sent from mac80211.
This results in a command being sent to the uCode even if
the client was not asleep.

The following simple patch has fixed the issue for me without any
degradation that I can find.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 4a268927377b..380d2087bf3a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3007,6 +3007,8 @@ static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
 		break;
 	case STA_NOTIFY_AWAKE:
 		WARN_ON(!sta_priv->client);
+		if (!sta_priv->asleep)
+			break;
 		sta_priv->asleep = false;
 		sta_id = iwl_find_station(priv, sta->addr);
 		if (sta_id != IWL_INVALID_STATION)
-- 
cgit v1.2.3


From a7fce6ee8dd693fb2a9d19ddf9ee1fe380893fa1 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Tue, 19 Jan 2010 16:51:50 -0800
Subject: iwlwifi: sysassert identifier change

Change in uCode to include a unique identifier as part of sysassert,
in order to tell the difference, add the "ADVANCED SYSASSERT" description
when dump nic error to indicate the difference.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 380d2087bf3a..1c54425afe22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1757,7 +1757,7 @@ static const char *desc_lookup_text[] = {
 	"DEBUG_1",
 	"DEBUG_2",
 	"DEBUG_3",
-	"UNKNOWN"
+	"ADVANCED SYSASSERT"
 };
 
 static const char *desc_lookup(int i)
-- 
cgit v1.2.3


From 47e28f41dce90ea4317d35cf23f232c1a6b07adf Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 20 Jan 2010 11:21:06 -0800
Subject: iwlwifi: fix locking in iwl_mac_add_interface

The corresponding iwl_mac_remove_interface only
acquires the mutex, leading me to believe that
the spinlock is not necessary. However, this
doesn't actually acquire the mutex around the
vif pointer check and assignment, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 1cfabd6be0b8..02bf17ecaf54 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2631,23 +2631,21 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif)
 {
 	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
+	int err = 0;
 
 	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", vif->type);
 
+	mutex_lock(&priv->mutex);
+
 	if (priv->vif) {
 		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
-		return -EOPNOTSUPP;
+		err = -EOPNOTSUPP;
+		goto out;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
 	priv->vif = vif;
 	priv->iw_mode = vif->type;
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-
 	if (vif->addr) {
 		IWL_DEBUG_MAC80211(priv, "Set %pM\n", vif->addr);
 		memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
@@ -2657,10 +2655,11 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw,
 		/* we are not ready, will run again when ready */
 		set_bit(STATUS_MODE_PENDING, &priv->status);
 
+ out:
 	mutex_unlock(&priv->mutex);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
+	return err;
 }
 EXPORT_SYMBOL(iwl_mac_add_interface);
 
-- 
cgit v1.2.3


From 2494f63cc7394fc4424c4833b83d1831f52e54c8 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 20 Jan 2010 12:22:52 -0800
Subject: iwlwifi: update sensitivity calibration data for 6x00 series

Update sensitivity range values for 6000 & 6x50 series

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-6000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 81e03e33ec73..a9f8551e0e40 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -108,7 +108,7 @@ static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
 
 	.auto_corr_max_ofdm = 145,
 	.auto_corr_max_ofdm_mrc = 232,
-	.auto_corr_max_ofdm_x1 = 145,
+	.auto_corr_max_ofdm_x1 = 110,
 	.auto_corr_max_ofdm_mrc_x1 = 232,
 
 	.auto_corr_min_cck = 125,
-- 
cgit v1.2.3


From 9bead7632adb6341548056a80ec36e7ae098f4f4 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 20 Jan 2010 12:22:53 -0800
Subject: iwlwifi: update sensitivity calibration data for 5x00 series

Update sensitivity range values for 5x00 series

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-5000.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 6027e2a658d1..6bb433a0e535 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -263,8 +263,8 @@ static struct iwl_sensitivity_ranges iwl5000_sensitivity = {
 
 	.auto_corr_max_ofdm = 120,
 	.auto_corr_max_ofdm_mrc = 210,
-	.auto_corr_max_ofdm_x1 = 155,
-	.auto_corr_max_ofdm_mrc_x1 = 290,
+	.auto_corr_max_ofdm_x1 = 120,
+	.auto_corr_max_ofdm_mrc_x1 = 240,
 
 	.auto_corr_min_cck = 125,
 	.auto_corr_max_cck = 200,
-- 
cgit v1.2.3


From fac06108701a2a081a47d4dc6f03220aaab54486 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 20 Jan 2010 12:22:54 -0800
Subject: iwlwifi: update sensitivity calibration data for 1000 series

Update sensitivity range values for 1000 series

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c | 72 ++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 4281999cfaaa..9d1820676f30 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -89,8 +89,78 @@ static void iwl1000_nic_config(struct iwl_priv *priv)
 				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
 }
 
+static struct iwl_sensitivity_ranges iwl1000_sensitivity = {
+	.min_nrg_cck = 95,
+	.max_nrg_cck = 0, /* not used, set to 0 */
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 120,
+	.auto_corr_min_ofdm_mrc_x1 = 240,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 155,
+	.auto_corr_max_ofdm_mrc_x1 = 290,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
+
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
+	priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+	priv->hw_params.scd_bc_tbls_size =
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl5000_scd_bc_tbl);
+	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+	priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+	priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+	priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
+	priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
+
+	priv->hw_params.max_bsm_size = 0;
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+					BIT(IEEE80211_BAND_5GHZ);
+	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+	/* Set initial sensitivity parameters */
+	/* Set initial calibration set */
+	priv->hw_params.sens = &iwl1000_sensitivity;
+	priv->hw_params.calib_init_cfg =
+			BIT(IWL_CALIB_XTAL)		|
+			BIT(IWL_CALIB_LO)		|
+			BIT(IWL_CALIB_TX_IQ) 		|
+			BIT(IWL_CALIB_TX_IQ_PERD)	|
+			BIT(IWL_CALIB_BASE_BAND);
+
+	return 0;
+}
+
 static struct iwl_lib_ops iwl1000_lib = {
-	.set_hw_params = iwl5000_hw_set_hw_params,
+	.set_hw_params = iwl1000_hw_set_hw_params,
 	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwl5000_txq_set_sched,
-- 
cgit v1.2.3


From 4d6959219bb71aa34383fc1a1a520820aee6292b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jan 2010 05:24:04 -0800
Subject: iwlwifi: no need to test iw_mode in power saving

mac80211 will only enable powersaving for station mode.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-power.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 9e3ca0641451..232dd1879baf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -308,8 +308,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 {
 	int ret = 0;
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
-	bool enabled = (priv->iw_mode == NL80211_IFTYPE_STATION) &&
-			(priv->hw->conf.flags & IEEE80211_CONF_PS);
+	bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
 	bool update_chains;
 	struct iwl_powertable_cmd cmd;
 	int dtimper;
-- 
cgit v1.2.3


From 9f1f3ceacb7e52d9bc0364b4f26ae418de79656f Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jan 2010 05:28:40 -0800
Subject: iwlagn: simplify ucode loading

Move the waiting into iwl5000_load_section instead
of duplicating it in the caller.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-5000.c | 63 ++++++++++++---------------------
 1 file changed, 22 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 6bb433a0e535..6d5988901341 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -412,12 +412,14 @@ static void iwl5000_rx_calib_complete(struct iwl_priv *priv,
 /*
  * ucode
  */
-static int iwl5000_load_section(struct iwl_priv *priv,
-				struct fw_desc *image,
-				u32 dst_addr)
+static int iwl5000_load_section(struct iwl_priv *priv, const char *name,
+				struct fw_desc *image, u32 dst_addr)
 {
 	dma_addr_t phy_addr = image->p_addr;
 	u32 byte_cnt = image->len;
+	int ret;
+
+	priv->ucode_write_complete = 0;
 
 	iwl_write_direct32(priv,
 		FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
@@ -447,57 +449,36 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 		FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE	|
 		FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
 
-	return 0;
-}
-
-static int iwl5000_load_given_ucode(struct iwl_priv *priv,
-		struct fw_desc *inst_image,
-		struct fw_desc *data_image)
-{
-	int ret = 0;
-
-	ret = iwl5000_load_section(priv, inst_image,
-				   IWL50_RTC_INST_LOWER_BOUND);
-	if (ret)
-		return ret;
-
-	IWL_DEBUG_INFO(priv, "INST uCode section being loaded...\n");
+	IWL_DEBUG_INFO(priv, "%s uCode section being loaded...\n", name);
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
 					priv->ucode_write_complete, 5 * HZ);
 	if (ret == -ERESTARTSYS) {
-		IWL_ERR(priv, "Could not load the INST uCode section due "
-			"to interrupt\n");
+		IWL_ERR(priv, "Could not load the %s uCode section due "
+			"to interrupt\n", name);
 		return ret;
 	}
 	if (!ret) {
-		IWL_ERR(priv, "Could not load the INST uCode section\n");
+		IWL_ERR(priv, "Could not load the %s uCode section\n",
+			name);
 		return -ETIMEDOUT;
 	}
 
-	priv->ucode_write_complete = 0;
-
-	ret = iwl5000_load_section(
-		priv, data_image, IWL50_RTC_DATA_LOWER_BOUND);
-	if (ret)
-		return ret;
+	return 0;
+}
 
-	IWL_DEBUG_INFO(priv, "DATA uCode section being loaded...\n");
+static int iwl5000_load_given_ucode(struct iwl_priv *priv,
+		struct fw_desc *inst_image,
+		struct fw_desc *data_image)
+{
+	int ret = 0;
 
-	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
-				priv->ucode_write_complete, 5 * HZ);
-	if (ret == -ERESTARTSYS) {
-		IWL_ERR(priv, "Could not load the INST uCode section due "
-			"to interrupt\n");
+	ret = iwl5000_load_section(priv, "INST", inst_image,
+				   IWL50_RTC_INST_LOWER_BOUND);
+	if (ret)
 		return ret;
-	} else if (!ret) {
-		IWL_ERR(priv, "Could not load the DATA uCode section\n");
-		return -ETIMEDOUT;
-	} else
-		ret = 0;
-
-	priv->ucode_write_complete = 0;
 
-	return ret;
+	return iwl5000_load_section(priv, "DATA", data_image,
+				    IWL50_RTC_DATA_LOWER_BOUND);
 }
 
 int iwl5000_load_ucode(struct iwl_priv *priv)
-- 
cgit v1.2.3


From 80676518da523e926e70794ac2767829effcf3ba Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jan 2010 06:07:17 -0800
Subject: iwlwifi: remove bg_up work

There's no need to queue a work struct from
within a work struct, just move the code to
execute directly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 21 +++++++--------------
 drivers/net/wireless/iwlwifi/iwl-dev.h      |  1 -
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 21 +++++++--------------
 3 files changed, 14 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 1c54425afe22..b528a20ade4f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2439,18 +2439,6 @@ static void iwl_bg_run_time_calib_work(struct work_struct *work)
 	return;
 }
 
-static void iwl_bg_up(struct work_struct *data)
-{
-	struct iwl_priv *priv = container_of(data, struct iwl_priv, up);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	__iwl_up(priv);
-	mutex_unlock(&priv->mutex);
-}
-
 static void iwl_bg_restart(struct work_struct *data)
 {
 	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
@@ -2467,7 +2455,13 @@ static void iwl_bg_restart(struct work_struct *data)
 		ieee80211_restart_hw(priv->hw);
 	} else {
 		iwl_down(priv);
-		queue_work(priv->workqueue, &priv->up);
+
+		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+			return;
+
+		mutex_lock(&priv->mutex);
+		__iwl_up(priv);
+		mutex_unlock(&priv->mutex);
 	}
 }
 
@@ -3285,7 +3279,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 
 	init_waitqueue_head(&priv->wait_command_queue);
 
-	INIT_WORK(&priv->up, iwl_bg_up);
 	INIT_WORK(&priv->restart, iwl_bg_restart);
 	INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
 	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 9b0a5cbc20f9..1cd565aef62c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1264,7 +1264,6 @@ struct iwl_priv {
 
 	struct workqueue_struct *workqueue;
 
-	struct work_struct up;
 	struct work_struct restart;
 	struct work_struct calibrated_work;
 	struct work_struct scan_completed;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index cd42b5838b38..119da54116de 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3033,18 +3033,6 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	mutex_unlock(&priv->mutex);
 }
 
-static void iwl3945_bg_up(struct work_struct *data)
-{
-	struct iwl_priv *priv = container_of(data, struct iwl_priv, up);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	__iwl3945_up(priv);
-	mutex_unlock(&priv->mutex);
-}
-
 static void iwl3945_bg_restart(struct work_struct *data)
 {
 	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
@@ -3061,7 +3049,13 @@ static void iwl3945_bg_restart(struct work_struct *data)
 		ieee80211_restart_hw(priv->hw);
 	} else {
 		iwl3945_down(priv);
-		queue_work(priv->workqueue, &priv->up);
+
+		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+			return;
+
+		mutex_lock(&priv->mutex);
+		__iwl3945_up(priv);
+		mutex_unlock(&priv->mutex);
 	}
 }
 
@@ -3782,7 +3776,6 @@ static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
 
 	init_waitqueue_head(&priv->wait_command_queue);
 
-	INIT_WORK(&priv->up, iwl3945_bg_up);
 	INIT_WORK(&priv->restart, iwl3945_bg_restart);
 	INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
 	INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
-- 
cgit v1.2.3


From 71d75cf9ab858b99d072fece9784ab338af8e388 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jan 2010 06:08:19 -0800
Subject: iwlwifi: remove unused work structs

auth_work, calibrated_work, update_link_led
and report_work are never used, so remove them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-dev.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 1cd565aef62c..55dc5a866542 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1265,13 +1265,9 @@ struct iwl_priv {
 	struct workqueue_struct *workqueue;
 
 	struct work_struct restart;
-	struct work_struct calibrated_work;
 	struct work_struct scan_completed;
 	struct work_struct rx_replenish;
 	struct work_struct abort_scan;
-	struct work_struct update_link_led;
-	struct work_struct auth_work;
-	struct work_struct report_work;
 	struct work_struct request_scan;
 	struct work_struct beacon_update;
 	struct work_struct tt_work;
-- 
cgit v1.2.3


From 7ae810776a51dc4dc6580013b0f6ba0f34d2b165 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 21 Jan 2010 11:47:59 -0800
Subject: iwlwifi: fix typo in IWL_CCK_RATES_MASK

Due to a typo, the variable contains OFDM
rates as well. The only user doesn't care,
so this change doesn't really do anything
but fix up my confusion.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index 2f0094a43261..e71923961e69 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -191,7 +191,7 @@ enum {
 	IWL_RATE_2M_MASK)
 
 #define IWL_CCK_RATES_MASK          \
-       (IWL_BASIC_RATES_MASK      | \
+       (IWL_CCK_BASIC_RATES_MASK  | \
 	IWL_RATE_5M_MASK          | \
 	IWL_RATE_11M_MASK)
 
-- 
cgit v1.2.3


From d3a571971e5af241074947fc80f6284677f6e014 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Thu, 21 Jan 2010 11:52:28 -0800
Subject: iwlwifi: iwl_power_update_mode always hold mutex

iwl_power_update_mode expects to be called with mutex held, for example to
protect priv->vif. Only one caller currently does not do this, fix this.
Also, add a comment to iwl_power_update_mode to indicate this requirement.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 ++
 drivers/net/wireless/iwlwifi/iwl-power.c   | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 5c8377b9ad9b..d134301b553c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -815,7 +815,9 @@ static ssize_t iwl_dbgfs_sleep_level_override_write(struct file *file,
 
 	priv->power_data.debug_sleep_level_override = value;
 
+	mutex_lock(&priv->mutex);
 	iwl_power_update_mode(priv, true);
+	mutex_unlock(&priv->mutex);
 
 	return count;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 232dd1879baf..1a1a9f081cc7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -303,7 +303,7 @@ static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
 				sizeof(struct iwl_powertable_cmd), cmd);
 }
 
-
+/* priv->mutex must be held */
 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 {
 	int ret = 0;
-- 
cgit v1.2.3


From d60bec4eb7076acfc940cca3f9f219e7653a1466 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:17 +0000
Subject: tulip_core: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where appropriate
Convert printks to pr_<level>
Change print formats with %d.dx to %0dx
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/tulip_core.c | 162 +++++++++++++++++++++--------------------
 1 file changed, 82 insertions(+), 80 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index da4fc458f90c..e1a5f03a49c5 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -41,7 +41,6 @@
 static char version[] __devinitdata =
 	"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
 
-
 /* A few user-configurable values. */
 
 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
@@ -326,7 +325,8 @@ static void tulip_up(struct net_device *dev)
 	udelay(100);
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
+		printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
+		       dev->name, dev->irq);
 
 	iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
 	iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
@@ -387,8 +387,9 @@ static void tulip_up(struct net_device *dev)
 			(dev->if_port == 12 ? 0 : dev->if_port);
 		for (i = 0; i < tp->mtable->leafcount; i++)
 			if (tp->mtable->mleaf[i].media == looking_for) {
-				printk(KERN_INFO "%s: Using user-specified media %s.\n",
-					   dev->name, medianame[dev->if_port]);
+				dev_info(&dev->dev,
+					 "Using user-specified media %s\n",
+					 medianame[dev->if_port]);
 				goto media_picked;
 			}
 	}
@@ -396,8 +397,9 @@ static void tulip_up(struct net_device *dev)
 		int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
 		for (i = 0; i < tp->mtable->leafcount; i++)
 			if (tp->mtable->mleaf[i].media == looking_for) {
-				printk(KERN_INFO "%s: Using EEPROM-set media %s.\n",
-					   dev->name, medianame[looking_for]);
+				dev_info(&dev->dev,
+					 "Using EEPROM-set media %s\n",
+					 medianame[looking_for]);
 				goto media_picked;
 			}
 	}
@@ -424,9 +426,10 @@ media_picked:
 		if (tp->mii_cnt) {
 			tulip_select_media(dev, 1);
 			if (tulip_debug > 1)
-				printk(KERN_INFO "%s: Using MII transceiver %d, status "
-					   "%4.4x.\n",
-					   dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
+				dev_info(&dev->dev,
+					 "Using MII transceiver %d, status %04x\n",
+					 tp->phys[0],
+					 tulip_mdio_read(dev, tp->phys[0], 1));
 			iowrite32(csr6_mask_defstate, ioaddr + CSR6);
 			tp->csr6 = csr6_mask_hdcap;
 			dev->if_port = 11;
@@ -490,9 +493,10 @@ media_picked:
 	iowrite32(0, ioaddr + CSR2);		/* Rx poll demand */
 
 	if (tulip_debug > 2) {
-		printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
-			   dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
-			   ioread32(ioaddr + CSR6));
+		printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+		       dev->name, ioread32(ioaddr + CSR0),
+		       ioread32(ioaddr + CSR5),
+		       ioread32(ioaddr + CSR6));
 	}
 
 	/* Set the timer to switch to check for link beat and perhaps switch
@@ -540,27 +544,30 @@ static void tulip_tx_timeout(struct net_device *dev)
 	if (tulip_media_cap[dev->if_port] & MediaIsMII) {
 		/* Do nothing -- the media monitor should handle this. */
 		if (tulip_debug > 1)
-			printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
-				   dev->name);
+			dev_warn(&dev->dev,
+				 "Transmit timeout using MII device\n");
 	} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
 		   tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
 		   tp->chip_id == DM910X) {
-		printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
-			   "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
-			   dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
-			   ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+		dev_warn(&dev->dev,
+			 "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
+			 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
+			 ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
+			 ioread32(ioaddr + CSR15));
 		tp->timeout_recovery = 1;
 		schedule_work(&tp->media_work);
 		goto out_unlock;
 	} else if (tp->chip_id == PNIC2) {
-		printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
-		       "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
-		       dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
-		       (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
+		dev_warn(&dev->dev,
+			 "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
+			 (int)ioread32(ioaddr + CSR5),
+			 (int)ioread32(ioaddr + CSR6),
+			 (int)ioread32(ioaddr + CSR7),
+			 (int)ioread32(ioaddr + CSR12));
 	} else {
-		printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
-			   "%8.8x, resetting...\n",
-			   dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+		dev_warn(&dev->dev,
+			 "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
+			 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
 		dev->if_port = 0;
 	}
 
@@ -570,26 +577,26 @@ static void tulip_tx_timeout(struct net_device *dev)
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
 			int j;
-			printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x  "
-				   "%2.2x %2.2x %2.2x.\n",
-				   i, (unsigned int)tp->rx_ring[i].status,
-				   (unsigned int)tp->rx_ring[i].length,
-				   (unsigned int)tp->rx_ring[i].buffer1,
-				   (unsigned int)tp->rx_ring[i].buffer2,
-				   buf[0], buf[1], buf[2]);
+			printk(KERN_DEBUG
+			       "%2d: %08x %08x %08x %08x  %02x %02x %02x\n",
+			       i,
+			       (unsigned int)tp->rx_ring[i].status,
+			       (unsigned int)tp->rx_ring[i].length,
+			       (unsigned int)tp->rx_ring[i].buffer1,
+			       (unsigned int)tp->rx_ring[i].buffer2,
+			       buf[0], buf[1], buf[2]);
 			for (j = 0; buf[j] != 0xee && j < 1600; j++)
 				if (j < 100)
-					printk(KERN_CONT " %2.2x", buf[j]);
-			printk(KERN_CONT " j=%d.\n", j);
+					pr_cont(" %02x", buf[j]);
+			pr_cont(" j=%d\n", j);
 		}
-		printk(KERN_DEBUG "  Rx ring %8.8x: ", (int)tp->rx_ring);
+		printk(KERN_DEBUG "  Rx ring %08x: ", (int)tp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(KERN_CONT " %8.8x",
-			       (unsigned int)tp->rx_ring[i].status);
-		printk(KERN_DEBUG "  Tx ring %8.8x: ", (int)tp->tx_ring);
+			pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
+		printk(KERN_DEBUG "  Tx ring %08x: ", (int)tp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
-		printk(KERN_CONT "\n");
+			pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
+		pr_cont("\n");
 	}
 #endif
 
@@ -832,8 +839,9 @@ static int tulip_close (struct net_device *dev)
 	tulip_down (dev);
 
 	if (tulip_debug > 1)
-		printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
-			dev->name, ioread32 (ioaddr + CSR5));
+		dev_printk(KERN_DEBUG, &dev->dev,
+			   "Shutting down ethercard, status was %02x\n",
+			   ioread32 (ioaddr + CSR5));
 
 	free_irq (dev->irq, dev);
 
@@ -1073,10 +1081,10 @@ static void set_rx_mode(struct net_device *dev)
 				filterbit &= 0x3f;
 				mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
 				if (tulip_debug > 2)
-					printk(KERN_INFO "%s: Added filter for %pM"
-					       "  %8.8x bit %d.\n",
-					       dev->name, mclist->dmi_addr,
-					       ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
+					dev_info(&dev->dev,
+						 "Added filter for %pM  %08x bit %d\n",
+						 mclist->dmi_addr,
+						 ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
 			}
 			if (mc_filter[0] == tp->mc_filter[0]  &&
 				mc_filter[1] == tp->mc_filter[1])
@@ -1288,9 +1296,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	unsigned int force_csr0 = 0;
 
 #ifndef MODULE
-	static int did_version;		/* Already printed version info. */
-	if (tulip_debug > 0  &&  did_version++ == 0)
-		printk (KERN_INFO "%s", version);
+	if (tulip_debug > 0)
+		printk_once(KERN_INFO "%s", version);
 #endif
 
 	board_idx++;
@@ -1301,7 +1308,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	 */
 
         if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
-		printk (KERN_ERR PFX "skipping LMC card.\n");
+		pr_err(PFX "skipping LMC card\n");
 		return -ENODEV;
 	}
 
@@ -1317,15 +1324,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
 		if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
 		    pdev->revision < 0x30) {
-			printk(KERN_INFO PFX
-			       "skipping early DM9100 with Crc bug (use dmfe)\n");
+			pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
 			return -ENODEV;
 		}
 
 		dp = pci_device_to_OF_node(pdev);
 		if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
-			printk(KERN_INFO PFX
-			       "skipping DM910x expansion card (use dmfe)\n");
+			pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
 			return -ENODEV;
 		}
 	}
@@ -1372,9 +1377,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
 	i = pci_enable_device(pdev);
 	if (i) {
-		printk (KERN_ERR PFX
-			"Cannot enable tulip board #%d, aborting\n",
-			board_idx);
+		pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
+		       board_idx);
 		return i;
 	}
 
@@ -1383,22 +1387,22 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	/* alloc_etherdev ensures aligned and zeroed private structures */
 	dev = alloc_etherdev (sizeof (*tp));
 	if (!dev) {
-		printk (KERN_ERR PFX "ether device alloc failed, aborting\n");
+		pr_err(PFX "ether device alloc failed, aborting\n");
 		return -ENOMEM;
 	}
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
-		printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, "
-			"aborting\n", pci_name(pdev),
-			(unsigned long long)pci_resource_len (pdev, 0),
-			(unsigned long long)pci_resource_start (pdev, 0));
+		pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+		       pci_name(pdev),
+		       (unsigned long long)pci_resource_len (pdev, 0),
+		       (unsigned long long)pci_resource_start (pdev, 0));
 		goto err_out_free_netdev;
 	}
 
 	/* grab all resources from both PIO and MMIO regions, as we
 	 * don't want anyone else messing around with our hardware */
-	if (pci_request_regions (pdev, "tulip"))
+	if (pci_request_regions (pdev, DRV_NAME))
 		goto err_out_free_netdev;
 
 	ioaddr =  pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
@@ -1611,8 +1615,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	if (dev->mem_start & MEDIA_MASK)
 		tp->default_port = dev->mem_start & MEDIA_MASK;
 	if (tp->default_port) {
-		printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n",
-		       board_idx, medianame[tp->default_port & MEDIA_MASK]);
+		pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
+			board_idx, medianame[tp->default_port & MEDIA_MASK]);
 		tp->medialock = 1;
 		if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
 			tp->full_duplex = 1;
@@ -1627,7 +1631,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	}
 
 	if (tp->flags & HAS_MEDIA_TABLE) {
-		sprintf(dev->name, "tulip%d", board_idx);	/* hack */
+		sprintf(dev->name, DRV_NAME "%d", board_idx);	/* hack */
 		tulip_parse_eeprom(dev);
 		strcpy(dev->name, "eth%d");			/* un-hack */
 	}
@@ -1663,20 +1667,18 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	if (register_netdev(dev))
 		goto err_out_free_ring;
 
-	printk(KERN_INFO "%s: %s rev %d at "
+	pci_set_drvdata(pdev, dev);
+
+	dev_info(&dev->dev,
 #ifdef CONFIG_TULIP_MMIO
-		"MMIO"
+		 "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
 #else
-		"Port"
+		 "%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
 #endif
-		" %#llx,", dev->name, chip_name, pdev->revision,
-		(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
-	pci_set_drvdata(pdev, dev);
-
-	if (eeprom_missing)
-		printk(" EEPROM not present,");
-	printk(" %pM", dev->dev_addr);
-	printk(", IRQ %d.\n", irq);
+		 chip_name, pdev->revision,
+		 (unsigned long long)pci_resource_start(pdev, TULIP_BAR),
+		 eeprom_missing ? " EEPROM not present," : "",
+		 dev->dev_addr, irq);
 
         if (tp->chip_id == PNIC2)
 		tp->link_change = pnic2_lnk_change;
@@ -1799,12 +1801,12 @@ static int tulip_resume(struct pci_dev *pdev)
 		return 0;
 
 	if ((retval = pci_enable_device(pdev))) {
-		printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
+		pr_err(PFX "pci_enable_device failed in resume\n");
 		return retval;
 	}
 
 	if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
-		printk (KERN_ERR "tulip: request_irq failed in resume\n");
+		pr_err(PFX "request_irq failed in resume\n");
 		return retval;
 	}
 
@@ -1874,7 +1876,7 @@ static struct pci_driver tulip_driver = {
 static int __init tulip_init (void)
 {
 #ifdef MODULE
-	printk (KERN_INFO "%s", version);
+	pr_info("%s", version);
 #endif
 
 	/* copy module parms into globals */
-- 
cgit v1.2.3


From 985a63ed3faf0faaba840d806f5ca4d360d13ad3 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:18 +0000
Subject: tulip/21142.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/21142.c | 76 ++++++++++++++++++++++++-----------------------
 1 file changed, 39 insertions(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 9f6742fad6ca..007d8e75666d 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -43,8 +43,8 @@ void t21142_media_task(struct work_struct *work)
 	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
 		csr12 |= 6;
 	if (tulip_debug > 2)
-		printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n",
-			   dev->name, csr12, medianame[dev->if_port]);
+		dev_info(&dev->dev, "21143 negotiation status %08x, %s\n",
+			 csr12, medianame[dev->if_port]);
 	if (tulip_media_cap[dev->if_port] & MediaIsMII) {
 		if (tulip_check_duplex(dev) < 0) {
 			netif_carrier_off(dev);
@@ -56,23 +56,26 @@ void t21142_media_task(struct work_struct *work)
 	} else if (tp->nwayset) {
 		/* Don't screw up a negotiated session! */
 		if (tulip_debug > 1)
-			printk(KERN_INFO"%s: Using NWay-set %s media, csr12 %8.8x.\n",
-				   dev->name, medianame[dev->if_port], csr12);
+			dev_info(&dev->dev,
+				 "Using NWay-set %s media, csr12 %08x\n",
+				 medianame[dev->if_port], csr12);
 	} else if (tp->medialock) {
 			;
 	} else if (dev->if_port == 3) {
 		if (csr12 & 2) {	/* No 100mbps link beat, revert to 10mbps. */
 			if (tulip_debug > 1)
-				printk(KERN_INFO"%s: No 21143 100baseTx link beat, %8.8x, "
-					   "trying NWay.\n", dev->name, csr12);
+				dev_info(&dev->dev,
+					 "No 21143 100baseTx link beat, %08x, trying NWay\n",
+					 csr12);
 			t21142_start_nway(dev);
 			next_tick = 3*HZ;
 		}
 	} else if ((csr12 & 0x7000) != 0x5000) {
 		/* Negotiation failed.  Search media types. */
 		if (tulip_debug > 1)
-			printk(KERN_INFO"%s: 21143 negotiation failed, status %8.8x.\n",
-				   dev->name, csr12);
+			dev_info(&dev->dev,
+				 "21143 negotiation failed, status %08x\n",
+				 csr12);
 		if (!(csr12 & 4)) {		/* 10mbps link beat good. */
 			new_csr6 = 0x82420000;
 			dev->if_port = 0;
@@ -90,8 +93,8 @@ void t21142_media_task(struct work_struct *work)
 			iowrite32(1, ioaddr + CSR13);
 		}
 		if (tulip_debug > 1)
-			printk(KERN_INFO"%s: Testing new 21143 media %s.\n",
-				   dev->name, medianame[dev->if_port]);
+			dev_info(&dev->dev, "Testing new 21143 media %s\n",
+				 medianame[dev->if_port]);
 		if (new_csr6 != (tp->csr6 & ~0x00D5)) {
 			tp->csr6 &= 0x00D5;
 			tp->csr6 |= new_csr6;
@@ -119,8 +122,8 @@ void t21142_start_nway(struct net_device *dev)
 	tp->nway = tp->mediasense = 1;
 	tp->nwayset = tp->lpar = 0;
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%8.8x.\n",
-			   dev->name, csr14);
+		printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%08x\n",
+		       dev->name, csr14);
 	iowrite32(0x0001, ioaddr + CSR13);
 	udelay(100);
 	iowrite32(csr14, ioaddr + CSR14);
@@ -147,8 +150,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
 		csr12 |= 6;
 	if (tulip_debug > 1)
-		printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, "
-			   "%8.8x.\n", dev->name, csr12, csr5, csr14);
+		dev_info(&dev->dev,
+			 "21143 link status interrupt %08x, CSR5 %x, %08x\n",
+			 csr12, csr5, csr14);
 
 	/* If NWay finished and we have a negotiated partner capability. */
 	if (tp->nway  &&  !tp->nwayset  &&  (csr12 & 0x7000) == 0x5000) {
@@ -171,14 +175,15 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 
 		if (tulip_debug > 1) {
 			if (tp->nwayset)
-				printk(KERN_INFO "%s: Switching to %s based on link "
-					   "negotiation %4.4x & %4.4x = %4.4x.\n",
-					   dev->name, medianame[dev->if_port], tp->sym_advertise,
-					   tp->lpar, negotiated);
+				dev_info(&dev->dev,
+					 "Switching to %s based on link negotiation %04x & %04x = %04x\n",
+					 medianame[dev->if_port],
+					 tp->sym_advertise, tp->lpar,
+					 negotiated);
 			else
-				printk(KERN_INFO "%s: Autonegotiation failed, using %s,"
-					   " link beat status %4.4x.\n",
-					   dev->name, medianame[dev->if_port], csr12);
+				dev_info(&dev->dev,
+					 "Autonegotiation failed, using %s, link beat status %04x\n",
+					 medianame[dev->if_port], csr12);
 		}
 
 		if (tp->mtable) {
@@ -201,14 +206,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 #if 0							/* Restart shouldn't be needed. */
 		iowrite32(tp->csr6 | RxOn, ioaddr + CSR6);
 		if (tulip_debug > 2)
-			printk(KERN_DEBUG "%s:  Restarting Tx and Rx, CSR5 is %8.8x.\n",
-				   dev->name, ioread32(ioaddr + CSR5));
+			printk(KERN_DEBUG "%s:  Restarting Tx and Rx, CSR5 is %08x\n",
+			       dev->name, ioread32(ioaddr + CSR5));
 #endif
 		tulip_start_rxtx(tp);
 		if (tulip_debug > 2)
-			printk(KERN_DEBUG "%s:  Setting CSR6 %8.8x/%x CSR12 %8.8x.\n",
-				   dev->name, tp->csr6, ioread32(ioaddr + CSR6),
-				   ioread32(ioaddr + CSR12));
+			printk(KERN_DEBUG "%s:  Setting CSR6 %08x/%x CSR12 %08x\n",
+			       dev->name, tp->csr6, ioread32(ioaddr + CSR6),
+			       ioread32(ioaddr + CSR12));
 	} else if ((tp->nwayset  &&  (csr5 & 0x08000000) &&
 		    (dev->if_port == 3  ||  dev->if_port == 5) &&
 		    (csr12 & 2) == 2) ||
@@ -220,9 +225,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 		add_timer(&tp->timer);
 	} else if (dev->if_port == 3  ||  dev->if_port == 5) {
 		if (tulip_debug > 1)
-			printk(KERN_INFO"%s: 21143 %s link beat %s.\n",
-				   dev->name, medianame[dev->if_port],
-				   (csr12 & 2) ? "failed" : "good");
+			dev_info(&dev->dev, "21143 %s link beat %s\n",
+				 medianame[dev->if_port],
+				 (csr12 & 2) ? "failed" : "good");
 		if ((csr12 & 2)  &&  ! tp->medialock) {
 			del_timer_sync(&tp->timer);
 			t21142_start_nway(dev);
@@ -232,21 +237,18 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 			iowrite32(csr14 & ~0x080, ioaddr + CSR14);
 	} else if (dev->if_port == 0  ||  dev->if_port == 4) {
 		if ((csr12 & 4) == 0)
-			printk(KERN_INFO"%s: 21143 10baseT link beat good.\n",
-				   dev->name);
+			dev_info(&dev->dev, "21143 10baseT link beat good\n");
 	} else if (!(csr12 & 4)) {		/* 10mbps link beat good. */
 		if (tulip_debug)
-			printk(KERN_INFO"%s: 21143 10mbps sensed media.\n",
-				   dev->name);
+			dev_info(&dev->dev, "21143 10mbps sensed media\n");
 		dev->if_port = 0;
 	} else if (tp->nwayset) {
 		if (tulip_debug)
-			printk(KERN_INFO"%s: 21143 using NWay-set %s, csr6 %8.8x.\n",
-				   dev->name, medianame[dev->if_port], tp->csr6);
+			dev_info(&dev->dev, "21143 using NWay-set %s, csr6 %08x\n",
+				 medianame[dev->if_port], tp->csr6);
 	} else {		/* 100mbps link beat good. */
 		if (tulip_debug)
-			printk(KERN_INFO"%s: 21143 100baseTx sensed media.\n",
-				   dev->name);
+			dev_info(&dev->dev, "21143 100baseTx sensed media\n");
 		dev->if_port = 3;
 		tp->csr6 = 0x838E0000 | (tp->csr6 & 0x20ff);
 		iowrite32(0x0003FF7F, ioaddr + CSR14);
-- 
cgit v1.2.3


From f639dc7dadcbd97f1d666d5ffe00eab1ea3c0f6d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:19 +0000
Subject: tulip/de2104x.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/de2104x.c | 138 ++++++++++++++++++++++----------------------
 1 file changed, 68 insertions(+), 70 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 87ea39e2037d..29330209ad8b 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -382,9 +382,9 @@ static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
 		/* Ingore earlier buffers. */
 		if ((status & 0xffff) != 0x7fff) {
 			if (netif_msg_rx_err(de))
-				printk(KERN_WARNING "%s: Oversized Ethernet frame "
-					   "spanned multiple buffers, status %8.8x!\n",
-					   de->dev->name, status);
+				dev_warn(&de->dev->dev,
+					 "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+					 status);
 			de->net_stats.rx_length_errors++;
 		}
 	} else if (status & RxError) {
@@ -487,7 +487,7 @@ rx_next:
 	}
 
 	if (!rx_work)
-		printk(KERN_WARNING "%s: rx work limit reached\n", de->dev->name);
+		dev_warn(&de->dev->dev, "rx work limit reached\n");
 
 	de->rx_tail = rx_tail;
 }
@@ -504,7 +504,8 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)
 
 	if (netif_msg_intr(de))
 		printk(KERN_DEBUG "%s: intr, status %08x mode %08x desc %u/%u/%u\n",
-		        dev->name, status, dr32(MacMode), de->rx_tail, de->tx_head, de->tx_tail);
+		       dev->name, status, dr32(MacMode),
+		       de->rx_tail, de->tx_head, de->tx_tail);
 
 	dw32(MacStatus, status);
 
@@ -529,8 +530,9 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)
 
 		pci_read_config_word(de->pdev, PCI_STATUS, &pci_status);
 		pci_write_config_word(de->pdev, PCI_STATUS, pci_status);
-		printk(KERN_ERR "%s: PCI bus error, status=%08x, PCI status=%04x\n",
-		       dev->name, status, pci_status);
+		dev_err(&de->dev->dev,
+			"PCI bus error, status=%08x, PCI status=%04x\n",
+			status, pci_status);
 	}
 
 	return IRQ_HANDLED;
@@ -582,7 +584,8 @@ static void de_tx (struct de_private *de)
 				de->net_stats.tx_packets++;
 				de->net_stats.tx_bytes += skb->len;
 				if (netif_msg_tx_done(de))
-					printk(KERN_DEBUG "%s: tx done, slot %d\n", de->dev->name, tx_tail);
+					printk(KERN_DEBUG "%s: tx done, slot %d\n",
+					       de->dev->name, tx_tail);
 			}
 			dev_kfree_skb_irq(skb);
 		}
@@ -870,7 +873,7 @@ static void de_stop_rxtx (struct de_private *de)
 		udelay(100);
 	}
 
-	printk(KERN_WARNING "%s: timeout expired stopping DMA\n", de->dev->name);
+	dev_warn(&de->dev->dev, "timeout expired stopping DMA\n");
 }
 
 static inline void de_start_rxtx (struct de_private *de)
@@ -905,8 +908,8 @@ static void de_link_up(struct de_private *de)
 	if (!netif_carrier_ok(de->dev)) {
 		netif_carrier_on(de->dev);
 		if (netif_msg_link(de))
-			printk(KERN_INFO "%s: link up, media %s\n",
-			       de->dev->name, media_name[de->media_type]);
+			dev_info(&de->dev->dev, "link up, media %s\n",
+				 media_name[de->media_type]);
 	}
 }
 
@@ -915,7 +918,7 @@ static void de_link_down(struct de_private *de)
 	if (netif_carrier_ok(de->dev)) {
 		netif_carrier_off(de->dev);
 		if (netif_msg_link(de))
-			printk(KERN_INFO "%s: link down\n", de->dev->name);
+			dev_info(&de->dev->dev, "link down\n");
 	}
 }
 
@@ -925,7 +928,8 @@ static void de_set_media (struct de_private *de)
 	u32 macmode = dr32(MacMode);
 
 	if (de_is_running(de))
-		printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name);
+		dev_warn(&de->dev->dev,
+			 "chip is running while changing media!\n");
 
 	if (de->de21040)
 		dw32(CSR11, FULL_DUPLEX_MAGIC);
@@ -945,15 +949,15 @@ static void de_set_media (struct de_private *de)
 		macmode &= ~FullDuplex;
 
 	if (netif_msg_link(de)) {
-		printk(KERN_INFO
-		       "%s: set link %s\n"
-		       "%s:    mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
-		       "%s:    set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
-		       de->dev->name, media_name[media],
-		       de->dev->name, dr32(MacMode), dr32(SIAStatus),
-		       dr32(CSR13), dr32(CSR14), dr32(CSR15),
-		       de->dev->name, macmode, de->media[media].csr13,
-		       de->media[media].csr14, de->media[media].csr15);
+		dev_info(&de->dev->dev, "set link %s\n", media_name[media]);
+		dev_info(&de->dev->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
+			 dr32(MacMode), dr32(SIAStatus),
+			 dr32(CSR13), dr32(CSR14), dr32(CSR15));
+
+		dev_info(&de->dev->dev,
+			 "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+			 macmode, de->media[media].csr13,
+			 de->media[media].csr14, de->media[media].csr15);
 	}
 	if (macmode != dr32(MacMode))
 		dw32(MacMode, macmode);
@@ -992,9 +996,8 @@ static void de21040_media_timer (unsigned long data)
 			de_link_up(de);
 		else
 			if (netif_msg_timer(de))
-				printk(KERN_INFO "%s: %s link ok, status %x\n",
-				       dev->name, media_name[de->media_type],
-				       status);
+				dev_info(&dev->dev, "%s link ok, status %x\n",
+					 media_name[de->media_type], status);
 		return;
 	}
 
@@ -1022,8 +1025,8 @@ no_link_yet:
 	add_timer(&de->media_timer);
 
 	if (netif_msg_timer(de))
-		printk(KERN_INFO "%s: no link, trying media %s, status %x\n",
-		       dev->name, media_name[de->media_type], status);
+		dev_info(&dev->dev, "no link, trying media %s, status %x\n",
+			 media_name[de->media_type], status);
 }
 
 static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media)
@@ -1079,9 +1082,10 @@ static void de21041_media_timer (unsigned long data)
 			de_link_up(de);
 		else
 			if (netif_msg_timer(de))
-				printk(KERN_INFO "%s: %s link ok, mode %x status %x\n",
-				       dev->name, media_name[de->media_type],
-				       dr32(MacMode), status);
+				dev_info(&dev->dev,
+					 "%s link ok, mode %x status %x\n",
+					 media_name[de->media_type],
+					 dr32(MacMode), status);
 		return;
 	}
 
@@ -1150,8 +1154,8 @@ no_link_yet:
 	add_timer(&de->media_timer);
 
 	if (netif_msg_timer(de))
-		printk(KERN_INFO "%s: no link, trying media %s, status %x\n",
-		       dev->name, media_name[de->media_type], status);
+		dev_info(&dev->dev, "no link, trying media %s, status %x\n",
+			 media_name[de->media_type], status);
 }
 
 static void de_media_interrupt (struct de_private *de, u32 status)
@@ -1378,8 +1382,7 @@ static int de_open (struct net_device *dev)
 
 	rc = de_alloc_rings(de);
 	if (rc) {
-		printk(KERN_ERR "%s: ring allocation failure, err=%d\n",
-		       dev->name, rc);
+		dev_err(&dev->dev, "ring allocation failure, err=%d\n", rc);
 		return rc;
 	}
 
@@ -1387,15 +1390,14 @@ static int de_open (struct net_device *dev)
 
 	rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
 	if (rc) {
-		printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
-		       dev->name, dev->irq, rc);
+		dev_err(&dev->dev, "IRQ %d request failure, err=%d\n",
+			dev->irq, rc);
 		goto err_out_free;
 	}
 
 	rc = de_init_hw(de);
 	if (rc) {
-		printk(KERN_ERR "%s: h/w init failure, err=%d\n",
-		       dev->name, rc);
+		dev_err(&dev->dev, "h/w init failure, err=%d\n", rc);
 		goto err_out_free_irq;
 	}
 
@@ -1666,8 +1668,8 @@ static int de_nway_reset(struct net_device *dev)
 	status = dr32(SIAStatus);
 	dw32(SIAStatus, (status & ~NWayState) | NWayRestart);
 	if (netif_msg_link(de))
-		printk(KERN_INFO "%s: link nway restart, status %x,%x\n",
-		       de->dev->name, status, dr32(SIAStatus));
+		dev_info(&de->dev->dev, "link nway restart, status %x,%x\n",
+			 status, dr32(SIAStatus));
 	return 0;
 }
 
@@ -1711,7 +1713,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de)
 		de->dev->dev_addr[i] = value;
 		udelay(1);
 		if (boguscnt <= 0)
-			printk(KERN_WARNING PFX "timeout reading 21040 MAC address byte %u\n", i);
+			pr_warning(PFX "timeout reading 21040 MAC address byte %u\n", i);
 	}
 }
 
@@ -1830,9 +1832,8 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
 	}
 
 	if (netif_msg_probe(de))
-		printk(KERN_INFO "de%d: SROM leaf offset %u, default media %s\n",
-		       de->board_idx, ofs,
-		       media_name[de->media_type]);
+		pr_info("de%d: SROM leaf offset %u, default media %s\n",
+		       de->board_idx, ofs, media_name[de->media_type]);
 
 	/* init SIA register values to defaults */
 	for (i = 0; i < DE_MAX_MEDIA; i++) {
@@ -1879,9 +1880,9 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
 		de->media[idx].type = idx;
 
 		if (netif_msg_probe(de))
-			printk(KERN_INFO "de%d:   media block #%u: %s",
-			       de->board_idx, i,
-			       media_name[de->media[idx].type]);
+			pr_info("de%d:   media block #%u: %s",
+				de->board_idx, i,
+				media_name[de->media[idx].type]);
 
 		bufp += sizeof (ib->opts);
 
@@ -1893,13 +1894,13 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
 				sizeof(ib->csr15);
 
 			if (netif_msg_probe(de))
-				printk(" (%x,%x,%x)\n",
-				       de->media[idx].csr13,
-				       de->media[idx].csr14,
-				       de->media[idx].csr15);
+				pr_cont(" (%x,%x,%x)\n",
+					de->media[idx].csr13,
+					de->media[idx].csr14,
+					de->media[idx].csr15);
 
 		} else if (netif_msg_probe(de))
-			printk("\n");
+			pr_cont("\n");
 
 		if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3]))
 			break;
@@ -2005,7 +2006,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	/* check for invalid IRQ value */
 	if (pdev->irq < 2) {
 		rc = -EIO;
-		printk(KERN_ERR PFX "invalid irq (%d) for pci dev %s\n",
+		pr_err(PFX "invalid irq (%d) for pci dev %s\n",
 		       pdev->irq, pci_name(pdev));
 		goto err_out_res;
 	}
@@ -2016,14 +2017,14 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	pciaddr = pci_resource_start(pdev, 1);
 	if (!pciaddr) {
 		rc = -EIO;
-		printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n",
-		       pci_name(pdev));
+		pr_err(PFX "no MMIO resource for pci dev %s\n", pci_name(pdev));
 		goto err_out_res;
 	}
 	if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) {
 		rc = -EIO;
-		printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n",
-		       (unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev));
+		pr_err(PFX "MMIO resource (%llx) too small on pci dev %s\n",
+		       (unsigned long long)pci_resource_len(pdev, 1),
+		       pci_name(pdev));
 		goto err_out_res;
 	}
 
@@ -2031,9 +2032,9 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	regs = ioremap_nocache(pciaddr, DE_REGS_SIZE);
 	if (!regs) {
 		rc = -EIO;
-		printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
-			(unsigned long long)pci_resource_len(pdev, 1),
-			pciaddr, pci_name(pdev));
+		pr_err(PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
+		       (unsigned long long)pci_resource_len(pdev, 1),
+		       pciaddr, pci_name(pdev));
 		goto err_out_res;
 	}
 	dev->base_addr = (unsigned long) regs;
@@ -2044,8 +2045,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	/* make sure hardware is not running */
 	rc = de_reset_mac(de);
 	if (rc) {
-		printk(KERN_ERR PFX "Cannot reset MAC, pci dev %s\n",
-		       pci_name(pdev));
+		pr_err(PFX "Cannot reset MAC, pci dev %s\n", pci_name(pdev));
 		goto err_out_iomap;
 	}
 
@@ -2065,12 +2065,11 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 		goto err_out_iomap;
 
 	/* print info about board and interface just registered */
-	printk (KERN_INFO "%s: %s at 0x%lx, %pM, IRQ %d\n",
-		dev->name,
-		de->de21040 ? "21040" : "21041",
-		dev->base_addr,
-		dev->dev_addr,
-		dev->irq);
+	dev_info(&dev->dev, "%s at 0x%lx, %pM, IRQ %d\n",
+		 de->de21040 ? "21040" : "21041",
+		 dev->base_addr,
+		 dev->dev_addr,
+		 dev->irq);
 
 	pci_set_drvdata(pdev, dev);
 
@@ -2158,8 +2157,7 @@ static int de_resume (struct pci_dev *pdev)
 	if (!netif_running(dev))
 		goto out_attach;
 	if ((retval = pci_enable_device(pdev))) {
-		printk (KERN_ERR "%s: pci_enable_device failed in resume\n",
-			dev->name);
+		dev_err(&dev->dev, "pci_enable_device failed in resume\n");
 		goto out;
 	}
 	de_init_hw(de);
-- 
cgit v1.2.3


From dde7c8ef167996689bc464eb65d2b09ef05263c2 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:20 +0000
Subject: tulip/dmfe.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove 'DRV_NAME ": ' from logging messages
Convert commented out printks to pr_debug

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/dmfe.c | 67 ++++++++++++++++++++++--------------------------
 1 file changed, 31 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 2d9f09c6189e..5fc61c1012e5 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -61,6 +61,8 @@
     Test and make sure PCI latency is now correct for all cases.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"dmfe"
 #define DRV_VERSION	"1.36.4"
 #define DRV_RELDATE	"2002-01-17"
@@ -149,16 +151,17 @@
 #define DMFE_TX_TIMEOUT ((3*HZ)/2)	/* tx packet time-out time 1.5 s" */
 #define DMFE_TX_KICK 	(HZ/2)	/* tx packet Kick-out time 0.5 s" */
 
-#define DMFE_DBUG(dbug_now, msg, value) \
-	do { \
- 		if (dmfe_debug || (dbug_now)) \
-			printk(KERN_ERR DRV_NAME ": %s %lx\n",\
- 				(msg), (long) (value)); \
+#define DMFE_DBUG(dbug_now, msg, value)			\
+	do {						\
+		if (dmfe_debug || (dbug_now))		\
+			pr_err("%s %lx\n",		\
+			       (msg), (long) (value));	\
 	} while (0)
 
-#define SHOW_MEDIA_TYPE(mode) \
-	printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \
-		(mode & 1) ? "100":"10", (mode & 4) ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode)				\
+	pr_info("Change Speed to %sMhz %s duplex\n" ,	\
+		(mode & 1) ? "100":"10",		\
+		(mode & 4) ? "full":"half");
 
 
 /* CR9 definition: SROM/MII */
@@ -391,8 +394,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 		struct device_node *dp = pci_device_to_OF_node(pdev);
 
 		if (dp && of_get_property(dp, "local-mac-address", NULL)) {
-			printk(KERN_INFO DRV_NAME
-			       ": skipping on-board DM910x (use tulip)\n");
+			pr_info("skipping on-board DM910x (use tulip)\n");
 			return -ENODEV;
 		}
 	}
@@ -405,8 +407,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_WARNING DRV_NAME
-			": 32-bit PCI DMA not available.\n");
+		pr_warning("32-bit PCI DMA not available\n");
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -417,13 +418,13 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 		goto err_out_free;
 
 	if (!pci_resource_start(pdev, 0)) {
-		printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+		pr_err("I/O base is zero\n");
 		err = -ENODEV;
 		goto err_out_disable;
 	}
 
 	if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
-		printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+		pr_err("Allocated I/O size too small\n");
 		err = -ENODEV;
 		goto err_out_disable;
 	}
@@ -438,7 +439,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 #endif
 
 	if (pci_request_regions(pdev, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+		pr_err("Failed to request PCI regions\n");
 		err = -ENODEV;
 		goto err_out_disable;
 	}
@@ -497,12 +498,9 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	if (err)
 		goto err_out_free_buf;
 
-	printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, %pM, irq %d.\n",
-	       dev->name,
-	       ent->driver_data >> 16,
-	       pci_name(pdev),
-	       dev->dev_addr,
-	       dev->irq);
+	dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n",
+		 ent->driver_data >> 16,
+		 pci_name(pdev), dev->dev_addr, dev->irq);
 
 	pci_set_master(pdev);
 
@@ -696,7 +694,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
 
 	/* Too large packet check */
 	if (skb->len > MAX_PACKET_SIZE) {
-		printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+		pr_err("big packet = %d\n", (u16)skb->len);
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -706,8 +704,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
 	/* No Tx resource check, it never happen nromally */
 	if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
 		spin_unlock_irqrestore(&db->lock, flags);
-		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
-		       db->tx_queue_cnt);
+		pr_err("No Tx resource %ld\n", db->tx_queue_cnt);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -779,12 +776,11 @@ static int dmfe_stop(struct DEVICE *dev)
 
 #if 0
 	/* show statistic counter */
-	printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx"
-		" LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
-		db->tx_fifo_underrun, db->tx_excessive_collision,
-		db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
-		db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
-		db->reset_fatal, db->reset_TXtimeout);
+	printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+	       db->tx_fifo_underrun, db->tx_excessive_collision,
+	       db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+	       db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+	       db->reset_fatal, db->reset_TXtimeout);
 #endif
 
 	return 0;
@@ -885,7 +881,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
 	txptr = db->tx_remove_ptr;
 	while(db->tx_packet_cnt) {
 		tdes0 = le32_to_cpu(txptr->tdes0);
-		/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+		pr_debug("tdes0=%x\n", tdes0);
 		if (tdes0 & 0x80000000)
 			break;
 
@@ -895,7 +891,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
 
 		/* Transmit statistic counter */
 		if ( tdes0 != 0x7fffffff ) {
-			/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+			pr_debug("tdes0=%x\n", tdes0);
 			dev->stats.collisions += (tdes0 >> 3) & 0xf;
 			dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
 			if (tdes0 & TDES0_ERR_MASK) {
@@ -992,7 +988,7 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
 			/* error summary bit check */
 			if (rdes0 & 0x8000) {
 				/* This is a error packet */
-				//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
+				pr_debug("rdes0: %x\n", rdes0);
 				dev->stats.rx_errors++;
 				if (rdes0 & 1)
 					dev->stats.rx_fifo_errors++;
@@ -1191,8 +1187,7 @@ static void dmfe_timer(unsigned long data)
 		if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) {
 			db->reset_TXtimeout++;
 			db->wait_reset = 1;
-			printk(KERN_WARNING "%s: Tx timeout - resetting\n",
-			       dev->name);
+			dev_warn(&dev->dev, "Tx timeout - resetting\n");
 		}
 	}
 
@@ -1646,7 +1641,7 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
 		else 				/* DM9102/DM9102A */
 			phy_mode = phy_read(db->ioaddr,
 				    db->phy_addr, 17, db->chip_id) & 0xf000;
-		/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+		pr_debug("Phy_mode %x\n", phy_mode);
 		switch (phy_mode) {
 		case 0x1000: db->op_mode = DMFE_10MHF; break;
 		case 0x2000: db->op_mode = DMFE_10MFD; break;
-- 
cgit v1.2.3


From e9cd1cbcda5e21706b03b543b1b73600b07f323f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:21 +0000
Subject: tulip/eeprom.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/eeprom.c | 47 +++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 889f57aae89b..93f4e8309f81 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -161,15 +161,15 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 		if (ee_data[0] == 0xff) {
 			if (last_mediatable) {
 				controller_index++;
-				printk(KERN_INFO "%s:  Controller %d of multiport board.\n",
-					   dev->name, controller_index);
+				dev_info(&dev->dev,
+					 "Controller %d of multiport board\n",
+					 controller_index);
 				tp->mtable = last_mediatable;
 				ee_data = last_ee_data;
 				goto subsequent_board;
 			} else
-				printk(KERN_INFO "%s:  Missing EEPROM, this interface may "
-					   "not work correctly!\n",
-			   dev->name);
+				dev_info(&dev->dev,
+					 "Missing EEPROM, this interface may not work correctly!\n");
 			return;
 		}
 	  /* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,16 +181,15 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
 		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
 				 sizeof(eeprom_fixups[i].newtable));
-		  printk(KERN_INFO "%s: Old format EEPROM on '%s' board.  Using"
-				 " substitute media control info.\n",
-				 dev->name, eeprom_fixups[i].name);
+		  dev_info(&dev->dev,
+			   "Old format EEPROM on '%s' board.  Using substitute media control info\n",
+			   eeprom_fixups[i].name);
 		  break;
 		}
 	  }
 	  if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-		  printk(KERN_INFO "%s: Old style EEPROM with no media selection "
-				 "information.\n",
-			   dev->name);
+		  dev_info(&dev->dev,
+			   "Old style EEPROM with no media selection information\n");
 		return;
 	  }
 	}
@@ -218,7 +217,8 @@ subsequent_board:
 	        /* there is no phy information, don't even try to build mtable */
 	        if (count == 0) {
 			if (tulip_debug > 0)
-				printk(KERN_WARNING "%s: no phy info, aborting mtable build\n", dev->name);
+				dev_warn(&dev->dev,
+					 "no phy info, aborting mtable build\n");
 		        return;
 		}
 
@@ -234,8 +234,8 @@ subsequent_board:
 		mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
 		mtable->csr15dir = mtable->csr15val = 0;
 
-		printk(KERN_INFO "%s:  EEPROM default media type %s.\n", dev->name,
-			   media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+		dev_info(&dev->dev, "EEPROM default media type %s\n",
+			 media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
 		for (i = 0; i < count; i++) {
 			struct medialeaf *leaf = &mtable->mleaf[i];
 
@@ -298,16 +298,17 @@ subsequent_board:
 			}
 			if (tulip_debug > 1  &&  leaf->media == 11) {
 				unsigned char *bp = leaf->leafdata;
-				printk(KERN_INFO "%s:  MII interface PHY %d, setup/reset "
-					   "sequences %d/%d long, capabilities %2.2x %2.2x.\n",
-					   dev->name, bp[0], bp[1], bp[2 + bp[1]*2],
-					   bp[5 + bp[2 + bp[1]*2]*2], bp[4 + bp[2 + bp[1]*2]*2]);
+				dev_info(&dev->dev,
+					 "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+					 bp[0], bp[1], bp[2 + bp[1]*2],
+					 bp[5 + bp[2 + bp[1]*2]*2],
+					 bp[4 + bp[2 + bp[1]*2]*2]);
 			}
-			printk(KERN_INFO "%s:  Index #%d - Media %s (#%d) described "
-				   "by a %s (%d) block.\n",
-				   dev->name, i, medianame[leaf->media & 15], leaf->media,
-				   leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
-				   leaf->type);
+			dev_info(&dev->dev,
+				 "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+				 i, medianame[leaf->media & 15], leaf->media,
+				 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+				 leaf->type);
 		}
 		if (new_advertise)
 			tp->sym_advertise = new_advertise;
-- 
cgit v1.2.3


From abe02af8263ae17e201994a1be7fc5eac6642acf Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:22 +0000
Subject: tulip/interrupt.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/interrupt.c | 100 ++++++++++++++++++++++--------------------
 1 file changed, 53 insertions(+), 47 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 2e8e8ee893c7..1faf7a4d7202 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -125,12 +125,12 @@ int tulip_poll(struct napi_struct *napi, int budget)
 #endif
 
 	if (tulip_debug > 4)
-		printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
-			   tp->rx_ring[entry].status);
+		printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
+		       entry, tp->rx_ring[entry].status);
 
        do {
 		if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
-			printk(KERN_DEBUG " In tulip_poll(), hardware disappeared.\n");
+			printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
 			break;
 		}
                /* Acknowledge current RX interrupt sources. */
@@ -146,7 +146,7 @@ int tulip_poll(struct napi_struct *napi, int budget)
                                break;
 
                        if (tulip_debug > 5)
-                               printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
+                               printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
                                       dev->name, entry, status);
 
 		       if (++work_done >= budget)
@@ -177,15 +177,15 @@ int tulip_poll(struct napi_struct *napi, int budget)
                                 /* Ingore earlier buffers. */
                                        if ((status & 0xffff) != 0x7fff) {
                                                if (tulip_debug > 1)
-                                                       printk(KERN_WARNING "%s: Oversized Ethernet frame "
-                                                              "spanned multiple buffers, status %8.8x!\n",
-                                                              dev->name, status);
+                                                       dev_warn(&dev->dev,
+								"Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+								status);
                                                tp->stats.rx_length_errors++;
                                        }
 			       } else {
                                 /* There was a fatal error. */
                                        if (tulip_debug > 2)
-                                               printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
+                                               printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
                                                       dev->name, status);
                                        tp->stats.rx_errors++; /* end of a packet.*/
 				       if (pkt_len > 1518 ||
@@ -226,12 +226,11 @@ int tulip_poll(struct napi_struct *napi, int budget)
 #ifndef final_version
                                        if (tp->rx_buffers[entry].mapping !=
                                            le32_to_cpu(tp->rx_ring[entry].buffer1)) {
-                                               printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
-                                                      "do not match in tulip_rx: %08x vs. %08llx %p / %p.\n",
-                                                      dev->name,
-                                                      le32_to_cpu(tp->rx_ring[entry].buffer1),
-                                                      (unsigned long long)tp->rx_buffers[entry].mapping,
-                                                      skb->head, temp);
+                                               dev_err(&dev->dev,
+						       "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
+						       le32_to_cpu(tp->rx_ring[entry].buffer1),
+						       (unsigned long long)tp->rx_buffers[entry].mapping,
+						       skb->head, temp);
                                        }
 #endif
 
@@ -365,16 +364,16 @@ static int tulip_rx(struct net_device *dev)
 	int received = 0;
 
 	if (tulip_debug > 4)
-		printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
-			   tp->rx_ring[entry].status);
+		printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
+		       entry, tp->rx_ring[entry].status);
 	/* If we own the next entry, it is a new packet. Send it up. */
 	while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
 		s32 status = le32_to_cpu(tp->rx_ring[entry].status);
 		short pkt_len;
 
 		if (tulip_debug > 5)
-			printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
-				   dev->name, entry, status);
+			printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
+			       dev->name, entry, status);
 		if (--rx_work_limit < 0)
 			break;
 
@@ -402,16 +401,16 @@ static int tulip_rx(struct net_device *dev)
 				/* Ingore earlier buffers. */
 				if ((status & 0xffff) != 0x7fff) {
 					if (tulip_debug > 1)
-						printk(KERN_WARNING "%s: Oversized Ethernet frame "
-							   "spanned multiple buffers, status %8.8x!\n",
-							   dev->name, status);
+						dev_warn(&dev->dev,
+							 "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+							 status);
 					tp->stats.rx_length_errors++;
 				}
 			} else {
 				/* There was a fatal error. */
 				if (tulip_debug > 2)
-					printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
-						   dev->name, status);
+					printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
+					       dev->name, status);
 				tp->stats.rx_errors++; /* end of a packet.*/
 				if (pkt_len > 1518 ||
 				    (status & RxDescRunt))
@@ -450,12 +449,11 @@ static int tulip_rx(struct net_device *dev)
 #ifndef final_version
 				if (tp->rx_buffers[entry].mapping !=
 				    le32_to_cpu(tp->rx_ring[entry].buffer1)) {
-					printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
-					       "do not match in tulip_rx: %08x vs. %Lx %p / %p.\n",
-					       dev->name,
-					       le32_to_cpu(tp->rx_ring[entry].buffer1),
-					       (long long)tp->rx_buffers[entry].mapping,
-					       skb->head, temp);
+					dev_err(&dev->dev,
+						"Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n",
+						le32_to_cpu(tp->rx_ring[entry].buffer1),
+						(long long)tp->rx_buffers[entry].mapping,
+						skb->head, temp);
 				}
 #endif
 
@@ -569,7 +567,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 #endif /*  CONFIG_TULIP_NAPI */
 
 		if (tulip_debug > 4)
-			printk(KERN_DEBUG "%s: interrupt  csr5=%#8.8x new csr5=%#8.8x.\n",
+			printk(KERN_DEBUG "%s: interrupt  csr5=%#8.8x new csr5=%#8.8x\n",
 			       dev->name, csr5, ioread32(ioaddr + CSR5));
 
 
@@ -601,8 +599,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 					/* There was an major error, log it. */
 #ifndef final_version
 					if (tulip_debug > 1)
-						printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
-							   dev->name, status);
+						printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
+						       dev->name, status);
 #endif
 					tp->stats.tx_errors++;
 					if (status & 0x4104) tp->stats.tx_aborted_errors++;
@@ -631,8 +629,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 
 #ifndef final_version
 			if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
-				printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
-					   dev->name, dirty_tx, tp->cur_tx);
+				dev_err(&dev->dev,
+					"Out-of-sync dirty pointer, %d vs. %d\n",
+					dirty_tx, tp->cur_tx);
 				dirty_tx += TX_RING_SIZE;
 			}
 #endif
@@ -643,9 +642,10 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 			tp->dirty_tx = dirty_tx;
 			if (csr5 & TxDied) {
 				if (tulip_debug > 2)
-					printk(KERN_WARNING "%s: The transmitter stopped."
-						   "  CSR5 is %x, CSR6 %x, new CSR6 %x.\n",
-						   dev->name, csr5, ioread32(ioaddr + CSR6), tp->csr6);
+					dev_warn(&dev->dev,
+						 "The transmitter stopped.  CSR5 is %x, CSR6 %x, new CSR6 %x\n",
+						 csr5, ioread32(ioaddr + CSR6),
+						 tp->csr6);
 				tulip_restart_rxtx(tp);
 			}
 			spin_unlock(&tp->lock);
@@ -696,8 +696,9 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 				 * to the 21142/3 docs that is).
 				 *   -- rmk
 				 */
-				printk(KERN_ERR "%s: (%lu) System Error occurred (%d)\n",
-					dev->name, tp->nir, error);
+				dev_err(&dev->dev,
+					"(%lu) System Error occurred (%d)\n",
+					tp->nir, error);
 			}
 			/* Clear all error sources, included undocumented ones! */
 			iowrite32(0x0800f7ba, ioaddr + CSR5);
@@ -706,16 +707,17 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 		if (csr5 & TimerInt) {
 
 			if (tulip_debug > 2)
-				printk(KERN_ERR "%s: Re-enabling interrupts, %8.8x.\n",
-					   dev->name, csr5);
+				dev_err(&dev->dev,
+					"Re-enabling interrupts, %08x\n",
+					csr5);
 			iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
 			tp->ttimer = 0;
 			oi++;
 		}
 		if (tx > maxtx || rx > maxrx || oi > maxoi) {
 			if (tulip_debug > 1)
-				printk(KERN_WARNING "%s: Too much work during an interrupt, "
-					   "csr5=0x%8.8x. (%lu) (%d,%d,%d)\n", dev->name, csr5, tp->nir, tx, rx, oi);
+				dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
+					 csr5, tp->nir, tx, rx, oi);
 
                        /* Acknowledge all interrupt sources. */
                         iowrite32(0x8001ffff, ioaddr + CSR5);
@@ -764,14 +766,18 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 	entry = tp->dirty_rx % RX_RING_SIZE;
 	if (tp->rx_buffers[entry].skb == NULL) {
 		if (tulip_debug > 1)
-			printk(KERN_WARNING "%s: in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", dev->name, tp->nir, tp->cur_rx, tp->ttimer, rx);
+			dev_warn(&dev->dev,
+				 "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n",
+				 tp->nir, tp->cur_rx, tp->ttimer, rx);
 		if (tp->chip_id == LC82C168) {
 			iowrite32(0x00, ioaddr + CSR7);
 			mod_timer(&tp->timer, RUN_AT(HZ/50));
 		} else {
 			if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
 				if (tulip_debug > 1)
-					printk(KERN_WARNING "%s: in rx suspend mode: (%lu) set timer\n", dev->name, tp->nir);
+					dev_warn(&dev->dev,
+						 "in rx suspend mode: (%lu) set timer\n",
+						 tp->nir);
 				iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
 					ioaddr + CSR7);
 				iowrite32(TimerInt, ioaddr + CSR5);
@@ -787,8 +793,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 	}
 
 	if (tulip_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n",
-			   dev->name, ioread32(ioaddr + CSR5));
+		printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
+		       dev->name, ioread32(ioaddr + CSR5));
 
 	return IRQ_HANDLED;
 }
-- 
cgit v1.2.3


From fa0b9a4c41490d550ebd3bd418f4551c989fec5d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:23 +0000
Subject: tulip/media.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/media.c | 74 +++++++++++++++++++++++------------------------
 1 file changed, 36 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index d8fda83705bf..68b170ae4d15 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -182,9 +182,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 		switch (mleaf->type) {
 		case 0:					/* 21140 non-MII xcvr. */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver"
-					   " with control setting %2.2x.\n",
-					   dev->name, p[1]);
+				printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n",
+				       dev->name, p[1]);
 			dev->if_port = p[0];
 			if (startup)
 				iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
@@ -205,15 +204,15 @@ void tulip_select_media(struct net_device *dev, int startup)
 				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 				unsigned char *rst = rleaf->leafdata;
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
-						   dev->name);
+					printk(KERN_DEBUG "%s: Resetting the transceiver\n",
+					       dev->name);
 				for (i = 0; i < rst[0]; i++)
 					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 			}
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control "
-					   "%4.4x/%4.4x.\n",
-					   dev->name, medianame[dev->if_port], setup[0], setup[1]);
+				printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n",
+				       dev->name, medianame[dev->if_port],
+				       setup[0], setup[1]);
 			if (p[0] & 0x40) {	/* SIA (CSR13-15) setup values are provided. */
 				csr13val = setup[0];
 				csr14val = setup[1];
@@ -240,8 +239,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 				if (startup) iowrite32(csr13val, ioaddr + CSR13);
 			}
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s:  Setting CSR15 to %8.8x/%8.8x.\n",
-					   dev->name, csr15dir, csr15val);
+				printk(KERN_DEBUG "%s:  Setting CSR15 to %08x/%08x\n",
+				       dev->name, csr15dir, csr15val);
 			if (mleaf->type == 4)
 				new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
 			else
@@ -317,8 +316,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 				if (tp->mii_advertise == 0)
 					tp->mii_advertise = tp->advertising[phy_num];
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s:  Advertising %4.4x on MII %d.\n",
-					       dev->name, tp->mii_advertise, tp->phys[phy_num]);
+					printk(KERN_DEBUG "%s:  Advertising %04x on MII %d\n",
+					       dev->name, tp->mii_advertise,
+					       tp->phys[phy_num]);
 				tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
 			}
 			break;
@@ -335,8 +335,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 				unsigned char *rst = rleaf->leafdata;
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
-						   dev->name);
+					printk(KERN_DEBUG "%s: Resetting the transceiver\n",
+					       dev->name);
 				for (i = 0; i < rst[0]; i++)
 					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 			}
@@ -344,20 +344,20 @@ void tulip_select_media(struct net_device *dev, int startup)
 			break;
 		}
 		default:
-			printk(KERN_DEBUG "%s:  Invalid media table selection %d.\n",
-					   dev->name, mleaf->type);
+			printk(KERN_DEBUG "%s:  Invalid media table selection %d\n",
+			       dev->name, mleaf->type);
 			new_csr6 = 0x020E0000;
 		}
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %2.2x.\n",
-				   dev->name, medianame[dev->if_port],
+			printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n",
+			       dev->name, medianame[dev->if_port],
 				   ioread32(ioaddr + CSR12) & 0xff);
 	} else if (tp->chip_id == LC82C168) {
 		if (startup && ! tp->medialock)
 			dev->if_port = tp->mii_cnt ? 11 : 0;
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s.\n",
-				   dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
+			printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n",
+			       dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
 		if (tp->mii_cnt) {
 			new_csr6 = 0x810C0000;
 			iowrite32(0x0001, ioaddr + CSR15);
@@ -388,10 +388,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 		} else
 			new_csr6 = 0x03860000;
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: No media description table, assuming "
-				   "%s transceiver, CSR12 %2.2x.\n",
-				   dev->name, medianame[dev->if_port],
-				   ioread32(ioaddr + CSR12));
+			printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n",
+			       dev->name, medianame[dev->if_port],
+			       ioread32(ioaddr + CSR12));
 	}
 
 	tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
@@ -415,16 +414,17 @@ int tulip_check_duplex(struct net_device *dev)
 	bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
 	lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA);
 	if (tulip_debug > 1)
-		printk(KERN_INFO "%s: MII status %4.4x, Link partner report "
-			   "%4.4x.\n", dev->name, bmsr, lpa);
+		dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n",
+			 bmsr, lpa);
 	if (bmsr == 0xffff)
 		return -2;
 	if ((bmsr & BMSR_LSTATUS) == 0) {
 		int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
 		if ((new_bmsr & BMSR_LSTATUS) == 0) {
 			if (tulip_debug  > 1)
-				printk(KERN_INFO "%s: No link beat on the MII interface,"
-					   " status %4.4x.\n", dev->name, new_bmsr);
+				dev_info(&dev->dev,
+					 "No link beat on the MII interface, status %04x\n",
+					 new_bmsr);
 			return -1;
 		}
 	}
@@ -443,10 +443,10 @@ int tulip_check_duplex(struct net_device *dev)
 		tulip_restart_rxtx(tp);
 
 		if (tulip_debug > 0)
-			printk(KERN_INFO "%s: Setting %s-duplex based on MII"
-				   "#%d link partner capability of %4.4x.\n",
-				   dev->name, tp->full_duplex ? "full" : "half",
-				   tp->phys[0], lpa);
+			dev_info(&dev->dev,
+				 "Setting %s-duplex based on MII#%d link partner capability of %04x\n",
+				 tp->full_duplex ? "full" : "half",
+				 tp->phys[0], lpa);
 		return 1;
 	}
 
@@ -501,15 +501,13 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
 
 		tp->phys[phy_idx++] = phy;
 
-		printk (KERN_INFO "tulip%d:  MII transceiver #%d "
-			"config %4.4x status %4.4x advertising %4.4x.\n",
+		pr_info("tulip%d:  MII transceiver #%d config %04x status %04x advertising %04x\n",
 			board_idx, phy, mii_reg0, mii_status, mii_advert);
 
 		/* Fixup for DLink with miswired PHY. */
 		if (mii_advert != to_advert) {
-			printk (KERN_DEBUG "tulip%d:  Advertising %4.4x on PHY %d,"
-				" previously advertising %4.4x.\n",
-				board_idx, to_advert, phy, mii_advert);
+			printk(KERN_DEBUG "tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
+			       board_idx, to_advert, phy, mii_advert);
 			tulip_mdio_write (dev, phy, 4, to_advert);
 		}
 
@@ -554,7 +552,7 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
 	}
 	tp->mii_cnt = phy_idx;
 	if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
-		printk (KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n",
+		pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n",
 			board_idx);
 		tp->phys[0] = 1;
 	}
-- 
cgit v1.2.3


From 1df8bbd1420705277cd382b1386cda724d61a678 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:24 +0000
Subject: tulip/pnic.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/pnic.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index d3253ed09dfc..966efa1a27d7 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -40,8 +40,8 @@ void pnic_do_nway(struct net_device *dev)
 			new_csr6 |= 0x00000200;
 		}
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC autonegotiated status %8.8x, %s.\n",
-				   dev->name, phy_reg, medianame[dev->if_port]);
+			printk(KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n",
+			       dev->name, phy_reg, medianame[dev->if_port]);
 		if (tp->csr6 != new_csr6) {
 			tp->csr6 = new_csr6;
 			/* Restart Tx */
@@ -58,8 +58,8 @@ void pnic_lnk_change(struct net_device *dev, int csr5)
 	int phy_reg = ioread32(ioaddr + 0xB8);
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: PNIC link changed state %8.8x, CSR5 %8.8x.\n",
-			   dev->name, phy_reg, csr5);
+		printk(KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n",
+		       dev->name, phy_reg, csr5);
 	if (ioread32(ioaddr + CSR5) & TPLnkFail) {
 		iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
 		/* If we use an external MII, then we mustn't use the
@@ -114,9 +114,8 @@ void pnic_timer(unsigned long data)
 		int csr5 = ioread32(ioaddr + CSR5);
 
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC timer PHY status %8.8x, %s "
-				   "CSR5 %8.8x.\n",
-				   dev->name, phy_reg, medianame[dev->if_port], csr5);
+			printk(KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n",
+			       dev->name, phy_reg, medianame[dev->if_port], csr5);
 		if (phy_reg & 0x04000000) {	/* Remote link fault */
 			iowrite32(0x0201F078, ioaddr + 0xB8);
 			next_tick = 1*HZ;
@@ -126,10 +125,11 @@ void pnic_timer(unsigned long data)
 			next_tick = 60*HZ;
 		} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %4.4x, "
-					   "CSR5 %8.8x, PHY %3.3x.\n",
-					   dev->name, medianame[dev->if_port], csr12,
-					   ioread32(ioaddr + CSR5), ioread32(ioaddr + 0xB8));
+				printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
+				       dev->name, medianame[dev->if_port],
+				       csr12,
+				       ioread32(ioaddr + CSR5),
+				       ioread32(ioaddr + 0xB8));
 			next_tick = 3*HZ;
 			if (tp->medialock) {
 			} else if (tp->nwayset  &&  (dev->if_port & 1)) {
@@ -151,10 +151,11 @@ void pnic_timer(unsigned long data)
 				tulip_restart_rxtx(tp);
 				dev->trans_start = jiffies;
 				if (tulip_debug > 1)
-					printk(KERN_INFO "%s: Changing PNIC configuration to %s "
-						   "%s-duplex, CSR6 %8.8x.\n",
-						   dev->name, medianame[dev->if_port],
-						   tp->full_duplex ? "full" : "half", new_csr6);
+					dev_info(&dev->dev,
+						 "Changing PNIC configuration to %s %s-duplex, CSR6 %08x\n",
+						 medianame[dev->if_port],
+						 tp->full_duplex ? "full" : "half",
+						 new_csr6);
 			}
 		}
 	}
@@ -162,7 +163,7 @@ too_good_connection:
 	mod_timer(&tp->timer, RUN_AT(next_tick));
 	if(!ioread32(ioaddr + CSR7)) {
 		if (tulip_debug > 1)
-			printk(KERN_INFO "%s: sw timer wakeup.\n", dev->name);
+			dev_info(&dev->dev, "sw timer wakeup\n");
 		disable_irq(dev->irq);
 		tulip_refill_rx(dev);
 		enable_irq(dev->irq);
-- 
cgit v1.2.3


From 22086a1172b69b9f6200e169dc99a252a204affb Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:25 +0000
Subject: tulip/pnic2.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/pnic2.c | 59 ++++++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index d8418694bf46..b8197666021e 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -87,8 +87,8 @@ void pnic2_timer(unsigned long data)
 	int next_tick = 60*HZ;
 
 	if (tulip_debug > 3)
-		printk(KERN_INFO"%s: PNIC2 negotiation status %8.8x.\n",
-                    dev->name,ioread32(ioaddr + CSR12));
+		dev_info(&dev->dev, "PNIC2 negotiation status %08x\n",
+			 ioread32(ioaddr + CSR12));
 
 	if (next_tick) {
 		mod_timer(&tp->timer, RUN_AT(next_tick));
@@ -125,8 +125,8 @@ void pnic2_start_nway(struct net_device *dev)
         csr14 |= 0x00001184;
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, "
-                      "csr14=%8.8x.\n", dev->name, csr14);
+		printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, csr14=%08x\n",
+		       dev->name, csr14);
 
         /* tell pnic2_lnk_change we are doing an nway negotiation */
 	dev->if_port = 0;
@@ -137,8 +137,8 @@ void pnic2_start_nway(struct net_device *dev)
 
 	tp->csr6 = ioread32(ioaddr + CSR6);
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: On Entry to Nway, "
-                      "csr6=%8.8x.\n", dev->name, tp->csr6);
+		printk(KERN_DEBUG "%s: On Entry to Nway, csr6=%08x\n",
+		       dev->name, tp->csr6);
 
         /* mask off any bits not to touch
          * comment at top of file explains mask value
@@ -181,9 +181,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 	int csr12 = ioread32(ioaddr + CSR12);
 
 	if (tulip_debug > 1)
-		printk(KERN_INFO"%s: PNIC2 link status interrupt %8.8x, "
-                       " CSR5 %x, %8.8x.\n", dev->name, csr12,
-                       csr5, ioread32(ioaddr + CSR14));
+		dev_info(&dev->dev,
+			 "PNIC2 link status interrupt %08x,  CSR5 %x, %08x\n",
+			 csr12, csr5, ioread32(ioaddr + CSR14));
 
 	/* If NWay finished and we have a negotiated partner capability.
          * check bits 14:12 for bit pattern 101 - all is good
@@ -215,9 +215,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 			else if (negotiated & 0x0020)	dev->if_port = 0;
 			else {
 			     if (tulip_debug > 1)
-		                   printk(KERN_INFO "%s: funny autonegotiate result "
-                                        "csr12 %8.8x advertising %4.4x\n",
-			                 dev->name, csr12, tp->sym_advertise);
+				     dev_info(&dev->dev,
+					      "funny autonegotiate result csr12 %08x advertising %04x\n",
+					      csr12, tp->sym_advertise);
 			     tp->nwayset = 0;
 			     /* so check  if 100baseTx link state is okay */
 			     if ((csr12 & 2) == 0  &&  (tp->sym_advertise & 0x0180))
@@ -231,10 +231,11 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 
 			if (tulip_debug > 1) {
 			       if (tp->nwayset)
-			             printk(KERN_INFO "%s: Switching to %s based on link "
-				    "negotiation %4.4x & %4.4x = %4.4x.\n",
-				     dev->name, medianame[dev->if_port],
-                                     tp->sym_advertise, tp->lpar, negotiated);
+				       dev_info(&dev->dev,
+						"Switching to %s based on link negotiation %04x & %04x = %04x\n",
+						medianame[dev->if_port],
+						tp->sym_advertise, tp->lpar,
+						negotiated);
 			}
 
                         /* remember to turn off bit 7 - autonegotiate
@@ -270,9 +271,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 			iowrite32(1, ioaddr + CSR13);
 
 			if (tulip_debug > 2)
-			        printk(KERN_DEBUG "%s:  Setting CSR6 %8.8x/%x CSR12 "
-                                      "%8.8x.\n", dev->name, tp->csr6,
-                                      ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12));
+			        printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n",
+				       dev->name, tp->csr6,
+				       ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12));
 
 			/* now the following actually writes out the
 			 * new csr6 values
@@ -282,9 +283,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
                         return;
 
 	        } else {
-	                printk(KERN_INFO "%s: Autonegotiation failed, "
-                                    "using %s, link beat status %4.4x.\n",
-				     dev->name, medianame[dev->if_port], csr12);
+	                dev_info(&dev->dev,
+				 "Autonegotiation failed, using %s, link beat status %04x\n",
+				 medianame[dev->if_port], csr12);
 
                         /* remember to turn off bit 7 - autonegotiate
                          * enable so we don't forget
@@ -339,9 +340,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 	        /* we are at 100mb and a potential link change occurred */
 
 		if (tulip_debug > 1)
-			printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n",
-				   dev->name, medianame[dev->if_port],
-				   (csr12 & 2) ? "failed" : "good");
+			dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+				 medianame[dev->if_port],
+				 (csr12 & 2) ? "failed" : "good");
 
                 /* check 100 link beat */
 
@@ -364,9 +365,9 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 	        /* we are at 10mb and a potential link change occurred */
 
 		if (tulip_debug > 1)
-			printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n",
-				   dev->name, medianame[dev->if_port],
-				   (csr12 & 4) ? "failed" : "good");
+			dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+				 medianame[dev->if_port],
+				 (csr12 & 4) ? "failed" : "good");
 
 
                 tp->nway = 0;
@@ -385,7 +386,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 
 
 	if (tulip_debug > 1)
-		printk(KERN_INFO"%s: PNIC2 Link Change Default?\n",dev->name);
+		dev_info(&dev->dev, "PNIC2 Link Change Default?\n");
 
         /* if all else fails default to trying 10baseT-HD */
 	dev->if_port = 0;
-- 
cgit v1.2.3


From 27146c43c4dbb727c4a211541af46577de2984af Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:26 +0000
Subject: tulip/timer.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/timer.c | 52 +++++++++++++++++++++++------------------------
 1 file changed, 25 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index a0e084223082..36c2725ec886 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -28,11 +28,11 @@ void tulip_media_task(struct work_struct *work)
 	unsigned long flags;
 
 	if (tulip_debug > 2) {
-		printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode"
-			   " %8.8x SIA %8.8x %8.8x %8.8x %8.8x.\n",
-			   dev->name, medianame[dev->if_port], ioread32(ioaddr + CSR5),
-			   ioread32(ioaddr + CSR6), csr12, ioread32(ioaddr + CSR13),
-			   ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+		printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
+		       dev->name, medianame[dev->if_port],
+		       ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
+		       csr12, ioread32(ioaddr + CSR13),
+		       ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
 	}
 	switch (tp->chip_id) {
 	case DC21140:
@@ -48,9 +48,9 @@ void tulip_media_task(struct work_struct *work)
 			   Assume this a generic MII or SYM transceiver. */
 			next_tick = 60*HZ;
 			if (tulip_debug > 2)
-				printk(KERN_DEBUG "%s: network media monitor CSR6 %8.8x "
-					   "CSR12 0x%2.2x.\n",
-					   dev->name, ioread32(ioaddr + CSR6), csr12 & 0xff);
+				printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n",
+				       dev->name,
+				       ioread32(ioaddr + CSR6), csr12 & 0xff);
 			break;
 		}
 		mleaf = &tp->mtable->mleaf[tp->cur_index];
@@ -62,9 +62,8 @@ void tulip_media_task(struct work_struct *work)
 			s8 bitnum = p[offset];
 			if (p[offset+1] & 0x80) {
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG"%s: Transceiver monitor tick "
-						   "CSR12=%#2.2x, no media sense.\n",
-						   dev->name, csr12);
+					printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n",
+					       dev->name, csr12);
 				if (mleaf->type == 4) {
 					if (mleaf->media == 3 && (csr12 & 0x02))
 						goto select_next_media;
@@ -72,16 +71,16 @@ void tulip_media_task(struct work_struct *work)
 				break;
 			}
 			if (tulip_debug > 2)
-				printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#2.2x"
-					   " bit %d is %d, expecting %d.\n",
-					   dev->name, csr12, (bitnum >> 1) & 7,
-					   (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
-					   (bitnum >= 0));
+				printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
+				       dev->name, csr12, (bitnum >> 1) & 7,
+				       (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+				       (bitnum >= 0));
 			/* Check that the specified bit has the proper value. */
 			if ((bitnum < 0) !=
 				((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
 				if (tulip_debug > 2)
-					printk(KERN_DEBUG "%s: Link beat detected for %s.\n", dev->name,
+					printk(KERN_DEBUG "%s: Link beat detected for %s\n",
+					       dev->name,
 					       medianame[mleaf->media & MEDIA_MASK]);
 				if ((p[2] & 0x61) == 0x01)	/* Bogus Znyx board. */
 					goto actually_mii;
@@ -100,9 +99,9 @@ void tulip_media_task(struct work_struct *work)
 			if (tulip_media_cap[dev->if_port] & MediaIsFD)
 				goto select_next_media; /* Skip FD entries. */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: No link beat on media %s,"
-				       " trying transceiver type %s.\n",
-				       dev->name, medianame[mleaf->media & MEDIA_MASK],
+				printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n",
+				       dev->name,
+				       medianame[mleaf->media & MEDIA_MASK],
 				       medianame[tp->mtable->mleaf[tp->cur_index].media]);
 			tulip_select_media(dev, 0);
 			/* Restart the transmit process. */
@@ -151,8 +150,8 @@ void mxic_timer(unsigned long data)
 	int next_tick = 60*HZ;
 
 	if (tulip_debug > 3) {
-		printk(KERN_INFO"%s: MXIC negotiation status %8.8x.\n", dev->name,
-			   ioread32(ioaddr + CSR12));
+		dev_info(&dev->dev, "MXIC negotiation status %08x\n",
+			 ioread32(ioaddr + CSR12));
 	}
 	if (next_tick) {
 		mod_timer(&tp->timer, RUN_AT(next_tick));
@@ -167,11 +166,10 @@ void comet_timer(unsigned long data)
 	int next_tick = 60*HZ;
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: Comet link status %4.4x partner capability "
-			   "%4.4x.\n",
-			   dev->name,
-			   tulip_mdio_read(dev, tp->phys[0], 1),
-			   tulip_mdio_read(dev, tp->phys[0], 5));
+		printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n",
+		       dev->name,
+		       tulip_mdio_read(dev, tp->phys[0], 1),
+		       tulip_mdio_read(dev, tp->phys[0], 5));
 	/* mod_timer synchronizes us with potential add_timer calls
 	 * from interrupts.
 	 */
-- 
cgit v1.2.3


From e02fb7aa0714ca9357571bb15ef0fe278a150cc7 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:27 +0000
Subject: tulip/uli526x.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from logging messages
Add do {} while(0) to ULI526X_DBUG macro
Make SHOW_MEDIA_TYPE macro more readable

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/uli526x.c | 46 ++++++++++++++++++++++++++-------------------
 1 file changed, 27 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index d549042a01df..dc3335d906f6 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -12,6 +12,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"uli526x"
 #define DRV_VERSION	"0.9.3"
 #define DRV_RELDATE	"2005-7-29"
@@ -82,9 +84,16 @@
 #define ULI526X_TX_TIMEOUT ((16*HZ)/2)	/* tx packet time-out time 8 s" */
 #define ULI526X_TX_KICK 	(4*HZ/2)	/* tx packet Kick-out time 2 s" */
 
-#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define ULI526X_DBUG(dbug_now, msg, value)			\
+do {								\
+	if (uli526x_debug || (dbug_now))			\
+		pr_err("%s %lx\n", (msg), (long) (value));	\
+} while (0)
 
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode)					\
+	pr_err("Change Speed to %sMhz %s duplex\n",		\
+	       mode & 1 ? "100" : "10",				\
+	       mode & 4 ? "full" : "half");
 
 
 /* CR9 definition: SROM/MII */
@@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+		pr_warning("32-bit PCI DMA not available\n");
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 		goto err_out_free;
 
 	if (!pci_resource_start(pdev, 0)) {
-		printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+		pr_err("I/O base is zero\n");
 		err = -ENODEV;
 		goto err_out_disable;
 	}
 
 	if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
-		printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+		pr_err("Allocated I/O size too small\n");
 		err = -ENODEV;
 		goto err_out_disable;
 	}
 
 	if (pci_request_regions(pdev, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+		pr_err("Failed to request PCI regions\n");
 		err = -ENODEV;
 		goto err_out_disable;
 	}
@@ -382,9 +391,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	if (err)
 		goto err_out_res;
 
-	printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n",
-	       dev->name,ent->driver_data >> 16,pci_name(pdev),
-	       dev->dev_addr, dev->irq);
+	dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+		 ent->driver_data >> 16, pci_name(pdev),
+		 dev->dev_addr, dev->irq);
 
 	pci_set_master(pdev);
 
@@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev)
 		}
 	}
 	if(phy_tmp == 32)
-		printk(KERN_WARNING "Can not find the phy address!!!");
+		pr_warning("Can not find the phy address!!!");
 	/* Parser SROM and media mode */
 	db->media_mode = uli526x_media_mode;
 
@@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 
 	/* Too large packet check */
 	if (skb->len > MAX_PACKET_SIZE) {
-		printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+		pr_err("big packet = %d\n", (u16)skb->len);
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 	/* No Tx resource check, it never happen nromally */
 	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
 		spin_unlock_irqrestore(&db->lock, flags);
-		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+		pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1058,7 +1067,7 @@ static void uli526x_timer(unsigned long data)
 		/* Link Failed */
 		ULI526X_DBUG(0, "Link Failed", tmp_cr12);
 		netif_carrier_off(dev);
-		printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+		pr_info("%s NIC Link is Down\n",dev->name);
 		db->link_failed = 1;
 
 		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1090,11 +1099,11 @@ static void uli526x_timer(unsigned long data)
 				}
 				if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
 				{
-					printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+					pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
 				}
 				else
 				{
-					printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+					pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
 				}
 				netif_carrier_on(dev);
 			}
@@ -1104,7 +1113,7 @@ static void uli526x_timer(unsigned long data)
 		{
 			if(db->init==1)
 			{
-				printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+				pr_info("%s NIC Link is Down\n",dev->name);
 				netif_carrier_off(dev);
 			}
 		}
@@ -1230,8 +1239,7 @@ static int uli526x_resume(struct pci_dev *pdev)
 
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err) {
-		printk(KERN_WARNING "%s: Could not put device into D0\n",
-			dev->name);
+		dev_warn(&dev->dev, "Could not put device into D0\n");
 		return err;
 	}
 
@@ -1432,7 +1440,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
 		update_cr6(db->cr6_data, dev->base_addr);
 		dev->trans_start = jiffies;
 	} else
-		printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+		pr_err("No Tx resource - Send_filter_frame!\n");
 }
 
 
-- 
cgit v1.2.3


From a1e37bc5e2d0ff8d025221e27c2bfff762072311 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:28 +0000
Subject: tulip/winbond-840.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Convert %d.%d.%d.%d to %pI4

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/winbond-840.c | 177 ++++++++++++++++++++--------------------
 1 file changed, 90 insertions(+), 87 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 23395e1ff238..9fb89afccf7c 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -376,8 +376,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 	irq = pdev->irq;
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n",
-		       pci_name(pdev));
+		pr_warning("Winbond-840: Device %s disabled due to DMA limitations\n",
+			   pci_name(pdev));
 		return -EIO;
 	}
 	dev = alloc_etherdev(sizeof(*np));
@@ -422,8 +422,9 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 		if (option & 0x200)
 			np->mii_if.full_duplex = 1;
 		if (option & 15)
-			printk(KERN_INFO "%s: ignoring user supplied media type %d",
-				dev->name, option & 15);
+			dev_info(&dev->dev,
+				 "ignoring user supplied media type %d",
+				 option & 15);
 	}
 	if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt] > 0)
 		np->mii_if.full_duplex = 1;
@@ -440,9 +441,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 	if (i)
 		goto err_out_cleardev;
 
-	printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
-	       dev->name, pci_id_tbl[chip_idx].name, ioaddr,
-	       dev->dev_addr, irq);
+	dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n",
+		 pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq);
 
 	if (np->drv_flags & CanHaveMII) {
 		int phy, phy_idx = 0;
@@ -453,16 +453,17 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 				np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
 				np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+
 						mdio_read(dev, phy, MII_PHYSID2);
-				printk(KERN_INFO "%s: MII PHY %8.8xh found at address %d, status "
-					   "0x%4.4x advertising %4.4x.\n",
-					   dev->name, np->mii, phy, mii_status, np->mii_if.advertising);
+				dev_info(&dev->dev,
+					 "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n",
+					 np->mii, phy, mii_status,
+					 np->mii_if.advertising);
 			}
 		}
 		np->mii_cnt = phy_idx;
 		np->mii_if.phy_id = np->phys[0];
 		if (phy_idx == 0) {
-				printk(KERN_WARNING "%s: MII PHY not found -- this device may "
-					   "not operate correctly.\n", dev->name);
+			dev_warn(&dev->dev,
+				 "MII PHY not found -- this device may not operate correctly\n");
 		}
 	}
 
@@ -644,8 +645,8 @@ static int netdev_open(struct net_device *dev)
 		goto out_err;
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n",
-			   dev->name, dev->irq);
+		printk(KERN_DEBUG "%s: w89c840_open() irq %d\n",
+		       dev->name, dev->irq);
 
 	if((i=alloc_ringdesc(dev)))
 		goto out_err;
@@ -657,7 +658,7 @@ static int netdev_open(struct net_device *dev)
 
 	netif_start_queue(dev);
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
+		printk(KERN_DEBUG "%s: Done netdev_open()\n", dev->name);
 
 	/* Set the timer to check for link beat. */
 	init_timer(&np->timer);
@@ -688,16 +689,18 @@ static int update_link(struct net_device *dev)
 	if (!(mii_reg & 0x4)) {
 		if (netif_carrier_ok(dev)) {
 			if (debug)
-				printk(KERN_INFO "%s: MII #%d reports no link. Disabling watchdog.\n",
-					dev->name, np->phys[0]);
+				dev_info(&dev->dev,
+					 "MII #%d reports no link. Disabling watchdog\n",
+					 np->phys[0]);
 			netif_carrier_off(dev);
 		}
 		return np->csr6;
 	}
 	if (!netif_carrier_ok(dev)) {
 		if (debug)
-			printk(KERN_INFO "%s: MII #%d link is back. Enabling watchdog.\n",
-				dev->name, np->phys[0]);
+			dev_info(&dev->dev,
+				 "MII #%d link is back. Enabling watchdog\n",
+				 np->phys[0]);
 		netif_carrier_on(dev);
 	}
 
@@ -729,9 +732,10 @@ static int update_link(struct net_device *dev)
 	if (fasteth)
 		result |= 0x20000000;
 	if (result != np->csr6 && debug)
-		printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n",
-				 dev->name, fasteth ? 100 : 10,
-			   	duplex ? "full" : "half", np->phys[0]);
+		dev_info(&dev->dev,
+			 "Setting %dMBit-%s-duplex based on MII#%d\n",
+			 fasteth ? 100 : 10, duplex ? "full" : "half",
+			 np->phys[0]);
 	return result;
 }
 
@@ -763,8 +767,8 @@ static inline void update_csr6(struct net_device *dev, int new)
 
 		limit--;
 		if(!limit) {
-			printk(KERN_INFO "%s: couldn't stop rxtx, IntrStatus %xh.\n",
-					dev->name, csr5);
+			dev_info(&dev->dev,
+				 "couldn't stop rxtx, IntrStatus %xh\n", csr5);
 			break;
 		}
 		udelay(1);
@@ -783,10 +787,9 @@ static void netdev_timer(unsigned long data)
 	void __iomem *ioaddr = np->base_addr;
 
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
-			   "config %8.8x.\n",
-			   dev->name, ioread32(ioaddr + IntrStatus),
-			   ioread32(ioaddr + NetworkConfig));
+		printk(KERN_DEBUG "%s: Media selection timer tick, status %08x config %08x\n",
+		       dev->name, ioread32(ioaddr + IntrStatus),
+		       ioread32(ioaddr + NetworkConfig));
 	spin_lock_irq(&np->lock);
 	update_csr6(dev, update_link(dev));
 	spin_unlock_irq(&np->lock);
@@ -899,8 +902,8 @@ static void init_registers(struct net_device *dev)
 	/* When not a module we can work around broken '486 PCI boards. */
 	if (boot_cpu_data.x86 <= 4) {
 		i |= 0x4800;
-		printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache "
-			   "alignment to 8 longwords.\n", dev->name);
+		dev_info(&dev->dev,
+			 "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n");
 	} else {
 		i |= 0xE000;
 	}
@@ -931,22 +934,23 @@ static void tx_timeout(struct net_device *dev)
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem *ioaddr = np->base_addr;
 
-	printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
-		   " resetting...\n", dev->name, ioread32(ioaddr + IntrStatus));
+	dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n",
+		 ioread32(ioaddr + IntrStatus));
 
 	{
 		int i;
 		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
-		printk(KERN_DEBUG"  Tx ring %p: ", np->tx_ring);
+			printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %8.8x", np->tx_ring[i].status);
-		printk("\n");
+			printk(KERN_CONT " %08x", np->tx_ring[i].status);
+		printk(KERN_CONT "\n");
 	}
-	printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n",
-				np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
-	printk(KERN_DEBUG "Tx Descriptor addr %xh.\n",ioread32(ioaddr+0x4C));
+	printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n",
+	       np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
+	printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C));
 
 	disable_irq(dev->irq);
 	spin_lock_irq(&np->lock);
@@ -1055,8 +1059,8 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
-			   dev->name, np->cur_tx, entry);
+		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d\n",
+		       dev->name, np->cur_tx, entry);
 	}
 	return NETDEV_TX_OK;
 }
@@ -1073,8 +1077,8 @@ static void netdev_tx_done(struct net_device *dev)
 		if (tx_status & 0x8000) { 	/* There was an error, log it. */
 #ifndef final_version
 			if (debug > 1)
-				printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
-					   dev->name, tx_status);
+				printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
+				       dev->name, tx_status);
 #endif
 			np->stats.tx_errors++;
 			if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
@@ -1086,8 +1090,8 @@ static void netdev_tx_done(struct net_device *dev)
 		} else {
 #ifndef final_version
 			if (debug > 3)
-				printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %8.8x.\n",
-					   dev->name, entry, tx_status);
+				printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %08x\n",
+				       dev->name, entry, tx_status);
 #endif
 			np->stats.tx_bytes += np->tx_skbuff[entry]->len;
 			np->stats.collisions += (tx_status >> 3) & 15;
@@ -1130,8 +1134,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 		iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
 
 		if (debug > 4)
-			printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
-				   dev->name, intr_status);
+			printk(KERN_DEBUG "%s: Interrupt, status %04x\n",
+			       dev->name, intr_status);
 
 		if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
 			break;
@@ -1156,8 +1160,9 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 			netdev_error(dev, intr_status);
 
 		if (--work_limit < 0) {
-			printk(KERN_WARNING "%s: Too much work at interrupt, "
-				   "status=0x%4.4x.\n", dev->name, intr_status);
+			dev_warn(&dev->dev,
+				 "Too much work at interrupt, status=0x%04x\n",
+				 intr_status);
 			/* Set the timer to re-enable the other interrupts after
 			   10*82usec ticks. */
 			spin_lock(&np->lock);
@@ -1171,8 +1176,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 	} while (1);
 
 	if (debug > 3)
-		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
-			   dev->name, ioread32(ioaddr + IntrStatus));
+		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x\n",
+		       dev->name, ioread32(ioaddr + IntrStatus));
 	return IRQ_RETVAL(handled);
 }
 
@@ -1185,8 +1190,8 @@ static int netdev_rx(struct net_device *dev)
 	int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
 
 	if (debug > 4) {
-		printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n",
-			   entry, np->rx_ring[entry].status);
+		printk(KERN_DEBUG " In netdev_rx(), entry %d status %04x\n",
+		       entry, np->rx_ring[entry].status);
 	}
 
 	/* If EOP is set on the next entry, it's a new packet. Send it up. */
@@ -1195,24 +1200,24 @@ static int netdev_rx(struct net_device *dev)
 		s32 status = desc->status;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "  netdev_rx() status was %8.8x.\n",
-				   status);
+			printk(KERN_DEBUG "  netdev_rx() status was %08x\n",
+			       status);
 		if (status < 0)
 			break;
 		if ((status & 0x38008300) != 0x0300) {
 			if ((status & 0x38000300) != 0x0300) {
 				/* Ingore earlier buffers. */
 				if ((status & 0xffff) != 0x7fff) {
-					printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
-						   "multiple buffers, entry %#x status %4.4x!\n",
-						   dev->name, np->cur_rx, status);
+					dev_warn(&dev->dev,
+						 "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
+						 np->cur_rx, status);
 					np->stats.rx_length_errors++;
 				}
 			} else if (status & 0x8000) {
 				/* There was a fatal error. */
 				if (debug > 2)
-					printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
-						   dev->name, status);
+					printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
+					       dev->name, status);
 				np->stats.rx_errors++; /* end of a packet.*/
 				if (status & 0x0890) np->stats.rx_length_errors++;
 				if (status & 0x004C) np->stats.rx_frame_errors++;
@@ -1225,8 +1230,8 @@ static int netdev_rx(struct net_device *dev)
 
 #ifndef final_version
 			if (debug > 4)
-				printk(KERN_DEBUG "  netdev_rx() normal Rx pkt length %d"
-					   " status %x.\n", pkt_len, status);
+				printk(KERN_DEBUG "  netdev_rx() normal Rx pkt length %d status %x\n",
+				       pkt_len, status);
 #endif
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
@@ -1251,11 +1256,10 @@ static int netdev_rx(struct net_device *dev)
 #ifndef final_version				/* Remove after testing. */
 			/* You will want this info for the initial debug. */
 			if (debug > 5)
-				printk(KERN_DEBUG "  Rx data %pM %pM"
-				       " %2.2x%2.2x %d.%d.%d.%d.\n",
+				printk(KERN_DEBUG "  Rx data %pM %pM %02x%02x %pI4\n",
 				       &skb->data[0], &skb->data[6],
 				       skb->data[12], skb->data[13],
-				       skb->data[14], skb->data[15], skb->data[16], skb->data[17]);
+				       &skb->data[14]);
 #endif
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_rx(skb);
@@ -1293,8 +1297,8 @@ static void netdev_error(struct net_device *dev, int intr_status)
 	void __iomem *ioaddr = np->base_addr;
 
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Abnormal event, %8.8x.\n",
-			   dev->name, intr_status);
+		printk(KERN_DEBUG "%s: Abnormal event, %08x\n",
+		       dev->name, intr_status);
 	if (intr_status == 0xffffffff)
 		return;
 	spin_lock(&np->lock);
@@ -1314,8 +1318,8 @@ static void netdev_error(struct net_device *dev, int intr_status)
 		 	new = 127; /* load full packet before starting */
 		new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
 #endif
-		printk(KERN_DEBUG "%s: Tx underflow, new csr6 %8.8x.\n",
-			   dev->name, new);
+		printk(KERN_DEBUG "%s: Tx underflow, new csr6 %08x\n",
+		       dev->name, new);
 		update_csr6(dev, new);
 	}
 	if (intr_status & RxDied) {		/* Missed a Rx frame. */
@@ -1487,11 +1491,13 @@ static int netdev_close(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	if (debug > 1) {
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %8.8x "
-			   "Config %8.8x.\n", dev->name, ioread32(ioaddr + IntrStatus),
-			   ioread32(ioaddr + NetworkConfig));
-		printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
-			   dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
+		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %08x Config %08x\n",
+		       dev->name, ioread32(ioaddr + IntrStatus),
+		       ioread32(ioaddr + NetworkConfig));
+		printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d\n",
+		       dev->name,
+		       np->cur_tx, np->dirty_tx,
+		       np->cur_rx, np->dirty_rx);
 	}
 
  	/* Stop the chip's Tx and Rx processes. */
@@ -1512,18 +1518,16 @@ static int netdev_close(struct net_device *dev)
 	if (debug > 2) {
 		int i;
 
-		printk(KERN_DEBUG"  Tx ring at %8.8x:\n",
-			   (int)np->tx_ring);
+		printk(KERN_DEBUG"  Tx ring at %08x:\n", (int)np->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
-				   i, np->tx_ring[i].length,
-				   np->tx_ring[i].status, np->tx_ring[i].buffer1);
-		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
-			   (int)np->rx_ring);
+			printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+			       i, np->tx_ring[i].length,
+			       np->tx_ring[i].status, np->tx_ring[i].buffer1);
+		printk(KERN_DEBUG "  Rx ring %08x:\n", (int)np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++) {
-			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
-				   i, np->rx_ring[i].length,
-				   np->rx_ring[i].status, np->rx_ring[i].buffer1);
+			printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+			       i, np->rx_ring[i].length,
+			       np->rx_ring[i].status, np->rx_ring[i].buffer1);
 		}
 	}
 #endif /* __i386__ debugging only */
@@ -1622,9 +1626,8 @@ static int w840_resume (struct pci_dev *pdev)
 		goto out; /* device not suspended */
 	if (netif_running(dev)) {
 		if ((retval = pci_enable_device(pdev))) {
-			printk (KERN_ERR
-				"%s: pci_enable_device failed in resume\n",
-				dev->name);
+			dev_err(&dev->dev,
+				"pci_enable_device failed in resume\n");
 			goto out;
 		}
 		spin_lock_irq(&np->lock);
-- 
cgit v1.2.3


From 44298ec0f20c45b9be96e181976aef1152d373b2 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 28 Jan 2010 20:59:29 +0000
Subject: tulip/xircom_cb.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME and xircom_cb from pr_<level>
Convert embedded function names in logging messages to %s, __func__

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/xircom_cb.c | 44 ++++++++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index c84123fd635c..acfeeb980562 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -14,6 +14,8 @@
  * 	$Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -234,7 +236,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	pci_write_config_word (pdev, PCI_STATUS,tmp16);
 
 	if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
-		printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
+		pr_err("%s: failed to allocate io-region\n", __func__);
 		return -ENODEV;
 	}
 
@@ -245,7 +247,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	 */
 	dev = alloc_etherdev(sizeof(struct xircom_private));
 	if (!dev) {
-		printk(KERN_ERR "xircom_probe: failed to allocate etherdev\n");
+		pr_err("%s: failed to allocate etherdev\n", __func__);
 		goto device_fail;
 	}
 	private = netdev_priv(dev);
@@ -253,12 +255,12 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	/* Allocate the send/receive buffers */
 	private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
 	if (private->rx_buffer == NULL) {
- 		printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
+		pr_err("%s: no memory for rx buffer\n", __func__);
 		goto rx_buf_fail;
 	}
 	private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
 	if (private->tx_buffer == NULL) {
-		printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
+		pr_err("%s: no memory for tx buffer\n", __func__);
 		goto tx_buf_fail;
 	}
 
@@ -281,11 +283,12 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	pci_set_drvdata(pdev, dev);
 
 	if (register_netdev(dev)) {
-		printk(KERN_ERR "xircom_probe: netdevice registration failed.\n");
+		pr_err("%s: netdevice registration failed\n", __func__);
 		goto reg_fail;
 	}
 
-	printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
+	dev_info(&dev->dev, "Xircom cardbus revision %i at irq %i\n",
+		 pdev->revision, pdev->irq);
 	/* start the transmitter to get a heartbeat */
 	/* TODO: send 2 dummy packets here */
 	transceiver_voodoo(private);
@@ -347,8 +350,10 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
 
 #ifdef DEBUG
 	print_binary(status);
-	printk("tx status 0x%08x 0x%08x \n",card->tx_buffer[0],card->tx_buffer[4]);
-	printk("rx status 0x%08x 0x%08x \n",card->rx_buffer[0],card->rx_buffer[4]);
+	printk("tx status 0x%08x 0x%08x \n",
+	       card->tx_buffer[0], card->tx_buffer[4]);
+	printk("rx status 0x%08x 0x%08x \n",
+	       card->rx_buffer[0], card->rx_buffer[4]);
 #endif
 	/* Handle shared irq and hotplug */
 	if (status == 0 || status == 0xffffffff) {
@@ -358,9 +363,9 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
 
 	if (link_status_changed(card)) {
 		int newlink;
-		printk(KERN_DEBUG "xircom_cb: Link status has changed \n");
+		printk(KERN_DEBUG "xircom_cb: Link status has changed\n");
 		newlink = link_status(card);
-		printk(KERN_INFO  "xircom_cb: Link is %i mbit \n",newlink);
+		dev_info(&dev->dev, "Link is %i mbit\n", newlink);
 		if (newlink)
 			netif_carrier_on(dev);
 		else
@@ -457,7 +462,8 @@ static int xircom_open(struct net_device *dev)
 	struct xircom_private *xp = netdev_priv(dev);
 	int retval;
 	enter("xircom_open");
-	printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
+	pr_info("xircom cardbus adaptor found, registering as %s, using irq %i \n",
+		dev->name, dev->irq);
 	retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
 	if (retval) {
 		leave("xircom_open - No IRQ");
@@ -770,7 +776,7 @@ static void activate_receiver(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
+			pr_err("Receiver failed to deactivate\n");
 	}
 
 	/* enable the receiver */
@@ -787,7 +793,7 @@ static void activate_receiver(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			printk(KERN_ERR "xircom_cb: Receiver failed to re-activate\n");
+			pr_err("Receiver failed to re-activate\n");
 	}
 
 	leave("activate_receiver");
@@ -818,7 +824,7 @@ static void deactivate_receiver(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
+			pr_err("Receiver failed to deactivate\n");
 	}
 
 
@@ -861,7 +867,7 @@ static void activate_transmitter(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
+			pr_err("Transmitter failed to deactivate\n");
 	}
 
 	/* enable the transmitter */
@@ -878,7 +884,7 @@ static void activate_transmitter(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			printk(KERN_ERR "xircom_cb: Transmitter failed to re-activate\n");
+			pr_err("Transmitter failed to re-activate\n");
 	}
 
 	leave("activate_transmitter");
@@ -909,7 +915,7 @@ static void deactivate_transmitter(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
+			pr_err("Transmitter failed to deactivate\n");
 	}
 
 
@@ -1184,7 +1190,7 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri
 			struct sk_buff *skb;
 
 			if (pkt_len > 1518) {
-				printk(KERN_ERR "xircom_cb: Packet length %i is bogus \n",pkt_len);
+				pr_err("Packet length %i is bogus\n", pkt_len);
 				pkt_len = 1518;
 			}
 
@@ -1222,7 +1228,7 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p
 		status = le32_to_cpu(card->tx_buffer[4*descnr]);
 #if 0
 		if (status & 0x8000) {	/* Major error */
-			printk(KERN_ERR "Major transmit error status %x \n", status);
+			pr_err("Major transmit error status %x\n", status);
 			card->tx_buffer[4*descnr] = 0;
 			netif_wake_queue (dev);
 		}
-- 
cgit v1.2.3


From c6c97bdaa3307d0811f14c99c38c63a8dae36e1f Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 1 Feb 2010 09:55:56 -0500
Subject: ps3_gelic_wireless: fix format warning

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/ps3_gelic_wireless.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index d520e9e8cdb2..448c5b6789d3 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1449,7 +1449,7 @@ static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan,
 	void *buf = NULL;
 	size_t len;
 
-	pr_debug("%s: <- always=%d essid_len=%d\n", __func__,
+	pr_debug("%s: <- always=%d essid_len=%z\n", __func__,
 		 always_scan, essid_len);
 	if (mutex_lock_interruptible(&wl->scan_lock))
 		return -ERESTARTSYS;
-- 
cgit v1.2.3


From f643e51d717b52ac28830e8bb98559b006a73bf4 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Fri, 29 Jan 2010 17:22:12 -0500
Subject: ath: make gcc check format arguments of ath_print(), fix all misuses

Numeric channel is hard to get, so it won't be printed.  Replace Mhz
with MHz on the affected lines and add commas as needed.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 6 +++---
 drivers/net/wireless/ath/ath9k/recv.c | 2 +-
 drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
 drivers/net/wireless/ath/debug.h      | 8 ++++----
 4 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e04835cb21b5..12069aac1d6c 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -206,7 +206,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	r = ath9k_hw_reset(ah, hchan, fastcc);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset channel (%u Mhz) "
+			  "Unable to reset channel (%u MHz), "
 			  "reset status %d\n",
 			  channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
@@ -869,7 +869,7 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset channel %u (%uMhz) ",
+			  "Unable to reset channel (%u MHz), "
 			  "reset status %d\n",
 			  channel->center_freq, r);
 	}
@@ -924,7 +924,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
 		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Unable to reset channel %u (%uMhz) "
+			  "Unable to reset channel (%u MHz), "
 			  "reset status %d\n",
 			  channel->center_freq, r);
 	}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 40b5d05edcce..1ca42e5148c8 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -429,7 +429,7 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 		sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
 		ath_print(common, ATH_DBG_PS,
 			  "Going back to sleep after having received "
-			  "PS-Poll data (0x%x)\n",
+			  "PS-Poll data (0x%lx)\n",
 			sc->ps_flags & (PS_WAIT_FOR_BEACON |
 					PS_WAIT_FOR_CAB |
 					PS_WAIT_FOR_PSPOLL_DATA |
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index a6893cf0c43b..3c790a4f38f7 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1857,7 +1857,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
 		ath_print(common, ATH_DBG_PS,
 			  "Going back to sleep after having "
-			  "received TX status (0x%x)\n",
+			  "received TX status (0x%lx)\n",
 			sc->ps_flags & (PS_WAIT_FOR_BEACON |
 					PS_WAIT_FOR_CAB |
 					PS_WAIT_FOR_PSPOLL_DATA |
diff --git a/drivers/net/wireless/ath/debug.h b/drivers/net/wireless/ath/debug.h
index d6b685a06c5e..8263633c003c 100644
--- a/drivers/net/wireless/ath/debug.h
+++ b/drivers/net/wireless/ath/debug.h
@@ -65,11 +65,11 @@ enum ATH_DEBUG {
 #define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
 
 #ifdef CONFIG_ATH_DEBUG
-void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...);
+void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
+	__attribute__ ((format (printf, 3, 4)));
 #else
-static inline void ath_print(struct ath_common *common,
-			     int dbg_mask,
-			     const char *fmt, ...)
+static inline void __attribute__ ((format (printf, 3, 4)))
+ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
 {
 }
 #endif /* CONFIG_ATH_DEBUG */
-- 
cgit v1.2.3


From 991a0987d9e821df1790bbbc368cf36db0c678d3 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Fri, 29 Jan 2010 17:22:26 -0500
Subject: ath9k: allocate string buffer in read_file_dma() by kmalloc()

Using stack for that causes warnings with CONFIG_FRAME_WARN=1024

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/debug.c | 43 ++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 9489b6b25b5f..42d2a506845a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -75,17 +75,24 @@ static const struct file_operations fops_debug = {
 
 #endif
 
+#define DMA_BUF_LEN 1024
+
 static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
 	struct ath_hw *ah = sc->sc_ah;
-	char buf[1024];
+	char *buf;
+	int retval;
 	unsigned int len = 0;
 	u32 val[ATH9K_NUM_DMA_DEBUG_REGS];
 	int i, qcuOffset = 0, dcuOffset = 0;
 	u32 *qcuBase = &val[0], *dcuBase = &val[4];
 
+	buf = kmalloc(DMA_BUF_LEN, GFP_KERNEL);
+	if (!buf)
+		return 0;
+
 	ath9k_ps_wakeup(sc);
 
 	REG_WRITE_D(ah, AR_MACMISC,
@@ -93,20 +100,20 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 		   (AR_MACMISC_MISC_OBS_BUS_1 <<
 		    AR_MACMISC_MISC_OBS_BUS_MSB_S)));
 
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 			"Raw DMA Debug values:\n");
 
 	for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++) {
 		if (i % 4 == 0)
-			len += snprintf(buf + len, sizeof(buf) - len, "\n");
+			len += snprintf(buf + len, DMA_BUF_LEN - len, "\n");
 
 		val[i] = REG_READ_D(ah, AR_DMADBG_0 + (i * sizeof(u32)));
-		len += snprintf(buf + len, sizeof(buf) - len, "%d: %08x ",
+		len += snprintf(buf + len, DMA_BUF_LEN - len, "%d: %08x ",
 				i, val[i]);
 	}
 
-	len += snprintf(buf + len, sizeof(buf) - len, "\n\n");
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len, "\n\n");
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 			"Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n");
 
 	for (i = 0; i < ATH9K_NUM_QUEUES; i++, qcuOffset += 4, dcuOffset += 5) {
@@ -120,7 +127,7 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 			dcuBase++;
 		}
 
-		len += snprintf(buf + len, sizeof(buf) - len,
+		len += snprintf(buf + len, DMA_BUF_LEN - len,
 			"%2d          %2x      %1x     %2x           %2x\n",
 			i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
 			(*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset + 3),
@@ -128,35 +135,37 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 			(*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
 	}
 
-	len += snprintf(buf + len, sizeof(buf) - len, "\n");
+	len += snprintf(buf + len, DMA_BUF_LEN - len, "\n");
 
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 		"qcu_stitch state:   %2x    qcu_fetch state:        %2x\n",
 		(val[3] & 0x003c0000) >> 18, (val[3] & 0x03c00000) >> 22);
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 		"qcu_complete state: %2x    dcu_complete state:     %2x\n",
 		(val[3] & 0x1c000000) >> 26, (val[6] & 0x3));
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 		"dcu_arb state:      %2x    dcu_fp state:           %2x\n",
 		(val[5] & 0x06000000) >> 25, (val[5] & 0x38000000) >> 27);
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 		"chan_idle_dur:     %3d    chan_idle_dur_valid:     %1d\n",
 		(val[6] & 0x000003fc) >> 2, (val[6] & 0x00000400) >> 10);
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 		"txfifo_valid_0:      %1d    txfifo_valid_1:          %1d\n",
 		(val[6] & 0x00000800) >> 11, (val[6] & 0x00001000) >> 12);
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 		"txfifo_dcu_num_0:   %2d    txfifo_dcu_num_1:       %2d\n",
 		(val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
 
-	len += snprintf(buf + len, sizeof(buf) - len, "pcu observe: 0x%x \n",
+	len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x \n",
 			REG_READ_D(ah, AR_OBS_BUS_1));
-	len += snprintf(buf + len, sizeof(buf) - len,
+	len += snprintf(buf + len, DMA_BUF_LEN - len,
 			"AR_CR: 0x%x \n", REG_READ_D(ah, AR_CR));
 
 	ath9k_ps_restore(sc);
 
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+	return retval;
 }
 
 static const struct file_operations fops_dma = {
-- 
cgit v1.2.3


From 28fd7daabfb35b7a0df2f7eaf460221e16dd2608 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 00:12:19 +0100
Subject: b43: N-PHY: update general workarounds
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 215 ++++++++++++++++++++-------------------
 drivers/net/wireless/b43/phy_n.h |   4 +
 2 files changed, 115 insertions(+), 104 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8c39fb126d4f..60e730a6f1dd 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -246,110 +246,6 @@ static void b43_nphy_tables_init(struct b43_wldev *dev)
 		b43_nphy_rev3plus_tables_init(dev);
 }
 
-static void b43_nphy_workarounds(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-	unsigned int i;
-
-	b43_phy_set(dev, B43_NPHY_IQFLIP,
-		    B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2);
-	if (1 /* FIXME band is 2.4GHz */) {
-		b43_phy_set(dev, B43_NPHY_CLASSCTL,
-			    B43_NPHY_CLASSCTL_CCKEN);
-	} else {
-		b43_phy_mask(dev, B43_NPHY_CLASSCTL,
-			     ~B43_NPHY_CLASSCTL_CCKEN);
-	}
-	b43_radio_set(dev, B2055_C1_TX_RF_SPARE, 0x8);
-	b43_phy_write(dev, B43_NPHY_TXFRAMEDELAY, 8);
-
-	/* Fixup some tables */
-	b43_ntab_write(dev, B43_NTAB16(8, 0x00), 0xA);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x10), 0xA);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x08), 0);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x18), 0);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x07), 0x7AAB);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x17), 0x7AAB);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x06), 0x800);
-	b43_ntab_write(dev, B43_NTAB16(8, 0x16), 0x800);
-
-	b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
-	b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
-	b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
-	b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
-
-	//TODO set RF sequence
-
-	/* Set narrowband clip threshold */
-	b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 66);
-	b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 66);
-
-	/* Set wideband clip 2 threshold */
-	b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
-			~B43_NPHY_C1_CLIPWBTHRES_CLIP2,
-			21 << B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT);
-	b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
-			~B43_NPHY_C2_CLIPWBTHRES_CLIP2,
-			21 << B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT);
-
-	/* Set Clip 2 detect */
-	b43_phy_set(dev, B43_NPHY_C1_CGAINI,
-		    B43_NPHY_C1_CGAINI_CL2DETECT);
-	b43_phy_set(dev, B43_NPHY_C2_CGAINI,
-		    B43_NPHY_C2_CGAINI_CL2DETECT);
-
-	if (0 /*FIXME*/) {
-		/* Set dwell lengths */
-		b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 43);
-		b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 43);
-		b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 9);
-		b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 9);
-
-		/* Set gain backoff */
-		b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
-				~B43_NPHY_C1_CGAINI_GAINBKOFF,
-				1 << B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT);
-		b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
-				~B43_NPHY_C2_CGAINI_GAINBKOFF,
-				1 << B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT);
-
-		/* Set HPVGA2 index */
-		b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN,
-				~B43_NPHY_C1_INITGAIN_HPVGA2,
-				6 << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
-		b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN,
-				~B43_NPHY_C2_INITGAIN_HPVGA2,
-				6 << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
-
-		//FIXME verify that the specs really mean to use autoinc here.
-		for (i = 0; i < 3; i++)
-			b43_ntab_write(dev, B43_NTAB16(7, 0x106) + i, 0x673);
-	}
-
-	/* Set minimum gain value */
-	b43_phy_maskset(dev, B43_NPHY_C1_MINMAX_GAIN,
-			~B43_NPHY_C1_MINGAIN,
-			23 << B43_NPHY_C1_MINGAIN_SHIFT);
-	b43_phy_maskset(dev, B43_NPHY_C2_MINMAX_GAIN,
-			~B43_NPHY_C2_MINGAIN,
-			23 << B43_NPHY_C2_MINGAIN_SHIFT);
-
-	if (phy->rev < 2) {
-		b43_phy_mask(dev, B43_NPHY_SCRAM_SIGCTL,
-			     ~B43_NPHY_SCRAM_SIGCTL_SCM);
-	}
-
-	/* Set phase track alpha and beta */
-	b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x125);
-	b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x1B3);
-	b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x105);
-	b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x16E);
-	b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0xCD);
-	b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
-}
-
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PA%20override */
 static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
 {
@@ -816,6 +712,117 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Workarounds */
+static void b43_nphy_workarounds(struct b43_wldev *dev)
+{
+	struct ssb_bus *bus = dev->dev->bus;
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = phy->n;
+
+	u8 events1[7] = { 0x0, 0x1, 0x2, 0x8, 0x4, 0x5, 0x3 };
+	u8 delays1[7] = { 0x8, 0x6, 0x6, 0x2, 0x4, 0x3C, 0x1 };
+
+	u8 events2[7] = { 0x0, 0x3, 0x5, 0x4, 0x2, 0x1, 0x8 };
+	u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+		b43_nphy_classifier(dev, 1, 0);
+	else
+		b43_nphy_classifier(dev, 1, 1);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	b43_phy_set(dev, B43_NPHY_IQFLIP,
+		    B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2);
+
+	if (dev->phy.rev >= 3) {
+		/* TODO */
+	} else {
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ &&
+		    nphy->band5g_pwrgain) {
+			b43_radio_mask(dev, B2055_C1_TX_RF_SPARE, ~0x8);
+			b43_radio_mask(dev, B2055_C2_TX_RF_SPARE, ~0x8);
+		} else {
+			b43_radio_set(dev, B2055_C1_TX_RF_SPARE, 0x8);
+			b43_radio_set(dev, B2055_C2_TX_RF_SPARE, 0x8);
+		}
+
+		/* TODO: convert to b43_ntab_write? */
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2000);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x000A);
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2010);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x000A);
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2002);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0xCDAA);
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2012);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0xCDAA);
+
+		if (dev->phy.rev < 2) {
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2008);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0000);
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2018);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0000);
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2007);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x7AAB);
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2017);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x7AAB);
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2006);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0800);
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2016);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0800);
+		}
+
+		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
+		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
+		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
+		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
+
+		if (bus->sprom.boardflags2_lo & 0x100 &&
+		    bus->boardinfo.type == 0x8B) {
+			delays1[0] = 0x1;
+			delays1[5] = 0x14;
+		}
+		/*TODO:b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);*/
+		/*TODO:b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);*/
+
+		/*TODO:b43_nphy_gain_crtl_workarounds(dev);*/
+
+		if (dev->phy.rev < 2) {
+			if (b43_phy_read(dev, B43_NPHY_RXCTL) & 0x2)
+				; /*TODO: b43_mhf(dev, 2, 0x0010, 0x0010, 3);*/
+		} else if (dev->phy.rev == 2) {
+			b43_phy_write(dev, B43_NPHY_CRSCHECK2, 0);
+			b43_phy_write(dev, B43_NPHY_CRSCHECK3, 0);
+		}
+
+		if (dev->phy.rev < 2)
+			b43_phy_mask(dev, B43_NPHY_SCRAM_SIGCTL,
+					~B43_NPHY_SCRAM_SIGCTL_SCM);
+
+		/* Set phase track alpha and beta */
+		b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x125);
+		b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x1B3);
+		b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x105);
+		b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x16E);
+		b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0xCD);
+		b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
+
+		b43_phy_mask(dev, B43_NPHY_PIL_DW1,
+				(u16)~B43_NPHY_PIL_DW_64QAM);
+		b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B1, 0xB5);
+		b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B2, 0xA4);
+		b43_phy_write(dev, B43_NPHY_TXF_20CO_S2B3, 0x00);
+
+		if (dev->phy.rev == 2)
+			b43_phy_set(dev, B43_NPHY_FINERX2_CGC,
+					B43_NPHY_FINERX2_CGC_DECGC);
+	}
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GenLoadSamples */
 static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 					bool test)
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index f5a27661f659..ae82f0fc2096 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -976,6 +976,10 @@ struct b43_phy_n {
 	s32 preamble_override;
 	u32 bb_mult_save;
 
+	bool gain_boost;
+	bool elna_gain_config;
+	bool band5g_pwrgain;
+
 	u8 mphase_cal_phase_id;
 	u16 mphase_txcal_cmdidx;
 	u16 mphase_txcal_numcmds;
-- 
cgit v1.2.3


From ef5127a4d256b9c0f47caae6cdc8ccfceedb09f9 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 00:12:20 +0100
Subject: b43: N-PHY: add workarounds for gain control
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 130 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 129 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 60e730a6f1dd..d738d769b025 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -712,6 +712,134 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
+static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u8 i, j;
+	u8 code;
+
+	/* TODO: for PHY >= 3
+	s8 *lna1_gain, *lna2_gain;
+	u8 *gain_db, *gain_bits;
+	u16 *rfseq_init;
+	u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 };
+	u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 };
+	*/
+
+	u8 rfseq_events[3] = { 6, 8, 7 };
+	u8 rfseq_delays[3] = { 10, 30, 1 };
+
+	if (dev->phy.rev >= 3) {
+		/* TODO */
+	} else {
+		/* Set Clip 2 detect */
+		b43_phy_set(dev, B43_NPHY_C1_CGAINI,
+				B43_NPHY_C1_CGAINI_CL2DETECT);
+		b43_phy_set(dev, B43_NPHY_C2_CGAINI,
+				B43_NPHY_C2_CGAINI_CL2DETECT);
+
+		/* Set narrowband clip threshold */
+		b43_phy_set(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
+		b43_phy_set(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
+
+		if (!dev->phy.is_40mhz) {
+			/* Set dwell lengths */
+			b43_phy_set(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
+			b43_phy_set(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
+			b43_phy_set(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009);
+			b43_phy_set(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009);
+		}
+
+		/* Set wideband clip 2 threshold */
+		b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
+				~B43_NPHY_C1_CLIPWBTHRES_CLIP2,
+				21);
+		b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
+				~B43_NPHY_C2_CLIPWBTHRES_CLIP2,
+				21);
+
+		if (!dev->phy.is_40mhz) {
+			b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
+				~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1);
+			b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
+				~B43_NPHY_C2_CGAINI_GAINBKOFF, 0x1);
+			b43_phy_maskset(dev, B43_NPHY_C1_CCK_CGAINI,
+				~B43_NPHY_C1_CCK_CGAINI_GAINBKOFF, 0x1);
+			b43_phy_maskset(dev, B43_NPHY_C2_CCK_CGAINI,
+				~B43_NPHY_C2_CCK_CGAINI_GAINBKOFF, 0x1);
+		}
+
+		b43_phy_set(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
+
+		if (nphy->gain_boost) {
+			if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
+			    dev->phy.is_40mhz)
+				code = 4;
+			else
+				code = 5;
+		} else {
+			code = dev->phy.is_40mhz ? 6 : 7;
+		}
+
+		/* Set HPVGA2 index */
+		b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN,
+				~B43_NPHY_C1_INITGAIN_HPVGA2,
+				code << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
+		b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN,
+				~B43_NPHY_C2_INITGAIN_HPVGA2,
+				code << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
+
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					(code << 8 | 0x7C));
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					(code << 8 | 0x7C));
+
+		/* TODO: b43_nphy_adjust_lna_gain_table(dev); */
+
+		if (nphy->elna_gain_config) {
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0808);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0C08);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+
+			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					(code << 8 | 0x74));
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+					(code << 8 | 0x74));
+		}
+
+		if (dev->phy.rev == 2) {
+			for (i = 0; i < 4; i++) {
+				b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+						(0x0400 * i) + 0x0020);
+				for (j = 0; j < 21; j++)
+					b43_phy_write(dev,
+						B43_NPHY_TABLE_DATALO, 3 * j);
+			}
+
+			/* TODO: b43_nphy_set_rf_sequence(dev, 5,
+					rfseq_events, rfseq_delays, 3);*/
+			b43_phy_maskset(dev, B43_NPHY_OVER_DGAIN1,
+				(u16)~B43_NPHY_OVER_DGAIN_CCKDGECV,
+				0x5A << B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT);
+
+			if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+				b43_phy_maskset(dev, B43_PHY_N(0xC5D),
+						0xFF80, 4);
+		}
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Workarounds */
 static void b43_nphy_workarounds(struct b43_wldev *dev)
 {
@@ -786,7 +914,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 		/*TODO:b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);*/
 		/*TODO:b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);*/
 
-		/*TODO:b43_nphy_gain_crtl_workarounds(dev);*/
+		b43_nphy_gain_crtl_workarounds(dev);
 
 		if (dev->phy.rev < 2) {
 			if (b43_phy_read(dev, B43_NPHY_RXCTL) & 0x2)
-- 
cgit v1.2.3


From 99b82c419bc685c5ca3d8d815564bac41e2716e2 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 20:18:03 +0100
Subject: b43: N-PHY: split RSSI selection into two per-PHY-revision functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 101 ++++++++++++++++++++-------------------
 1 file changed, 52 insertions(+), 49 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d738d769b025..558d3c052d95 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1316,66 +1316,69 @@ static void b43_nphy_scale_offset_rssi(struct b43_wldev *dev, u16 scale,
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TSSI, tmp);
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSISel */
-static void b43_nphy_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
+static void b43_nphy_rev2_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
 {
 	u16 val;
 
-	if (dev->phy.rev >= 3) {
-		/* TODO */
-	} else {
-		if (type < 3)
-			val = 0;
-		else if (type == 6)
-			val = 1;
-		else if (type == 3)
-			val = 2;
-		else
-			val = 3;
+	if (type < 3)
+		val = 0;
+	else if (type == 6)
+		val = 1;
+	else if (type == 3)
+		val = 2;
+	else
+		val = 3;
 
-		val = (val << 12) | (val << 14);
-		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, val);
-		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, val);
+	val = (val << 12) | (val << 14);
+	b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, val);
+	b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, val);
 
+	if (type < 3) {
+		b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO1, 0xFFCF,
+				(type + 1) << 4);
+		b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO2, 0xFFCF,
+				(type + 1) << 4);
+	}
+
+	/* TODO use some definitions */
+	if (code == 0) {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF, 0);
 		if (type < 3) {
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO1, 0xFFCF,
-					(type + 1) << 4);
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_RSSIO2, 0xFFCF,
-					(type + 1) << 4);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD, 0xFEC7, 0);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER, 0xEFDC, 0);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD, 0xFFFE, 0);
+			udelay(20);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER, 0xFFFE, 0);
 		}
-
-		/* TODO use some definitions */
-		if (code == 0) {
-			b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF, 0);
-			if (type < 3) {
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
-						0xFEC7, 0);
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
-						0xEFDC, 0);
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
-						0xFFFE, 0);
-				udelay(20);
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
-						0xFFFE, 0);
-			}
-		} else {
-			b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF,
-					0x3000);
-			if (type < 3) {
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
-						0xFEC7, 0x0180);
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
-						0xEFDC, (code << 1 | 0x1021));
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
-						0xFFFE, 0x0001);
-				udelay(20);
-				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
-						0xFFFE, 0);
-			}
+	} else {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF,
+				0x3000);
+		if (type < 3) {
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
+					0xFEC7, 0x0180);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
+					0xEFDC, (code << 1 | 0x1021));
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD, 0xFFFE, 0x1);
+			udelay(20);
+			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER, 0xFFFE, 0);
 		}
 	}
 }
 
+static void b43_nphy_rev3_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
+{
+	/* TODO */
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSISel */
+static void b43_nphy_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
+{
+	if (dev->phy.rev >= 3)
+		b43_nphy_rev3_rssi_select(dev, code, type);
+	else
+		b43_nphy_rev2_rssi_select(dev, code, type);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SetRssi2055Vcm */
 static void b43_nphy_set_rssi_2055_vcm(struct b43_wldev *dev, u8 type, u8 *buf)
 {
-- 
cgit v1.2.3


From 6e3b15a9e7c3e4f22e9ade658b9e185311078648 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 20:18:04 +0100
Subject: b43: N-PHY: add RSSI selection for newer PHYs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 84 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 83 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 558d3c052d95..0e04a2668ea3 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1367,7 +1367,89 @@ static void b43_nphy_rev2_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
 
 static void b43_nphy_rev3_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
 {
-	/* TODO */
+	struct b43_phy_n *nphy = dev->phy.n;
+	u8 i;
+	u16 reg, val;
+
+	if (code == 0) {
+		b43_phy_mask(dev, B43_NPHY_AFECTL_OVER1, 0xFDFF);
+		b43_phy_mask(dev, B43_NPHY_AFECTL_OVER, 0xFDFF);
+		b43_phy_mask(dev, B43_NPHY_AFECTL_C1, 0xFCFF);
+		b43_phy_mask(dev, B43_NPHY_AFECTL_C2, 0xFCFF);
+		b43_phy_mask(dev, B43_NPHY_TXF_40CO_B1S0, 0xFFDF);
+		b43_phy_mask(dev, B43_NPHY_TXF_40CO_B32S1, 0xFFDF);
+		b43_phy_mask(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0xFFC3);
+		b43_phy_mask(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0xFFC3);
+	} else {
+		for (i = 0; i < 2; i++) {
+			if ((code == 1 && i == 1) || (code == 2 && !i))
+				continue;
+
+			reg = (i == 0) ?
+				B43_NPHY_AFECTL_OVER1 : B43_NPHY_AFECTL_OVER;
+			b43_phy_maskset(dev, reg, 0xFDFF, 0x0200);
+
+			if (type < 3) {
+				reg = (i == 0) ?
+					B43_NPHY_AFECTL_C1 :
+					B43_NPHY_AFECTL_C2;
+				b43_phy_maskset(dev, reg, 0xFCFF, 0);
+
+				reg = (i == 0) ?
+					B43_NPHY_RFCTL_LUT_TRSW_UP1 :
+					B43_NPHY_RFCTL_LUT_TRSW_UP2;
+				b43_phy_maskset(dev, reg, 0xFFC3, 0);
+
+				if (type == 0)
+					val = (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ? 4 : 8;
+				else if (type == 1)
+					val = 16;
+				else
+					val = 32;
+				b43_phy_set(dev, reg, val);
+
+				reg = (i == 0) ?
+					B43_NPHY_TXF_40CO_B1S0 :
+					B43_NPHY_TXF_40CO_B32S1;
+				b43_phy_set(dev, reg, 0x0020);
+			} else {
+				if (type == 6)
+					val = 0x0100;
+				else if (type == 3)
+					val = 0x0200;
+				else
+					val = 0x0300;
+
+				reg = (i == 0) ?
+					B43_NPHY_AFECTL_C1 :
+					B43_NPHY_AFECTL_C2;
+
+				b43_phy_maskset(dev, reg, 0xFCFF, val);
+				b43_phy_maskset(dev, reg, 0xF3FF, val << 2);
+
+				if (type != 3 && type != 6) {
+					enum ieee80211_band band =
+						b43_current_band(dev->wl);
+
+					if ((nphy->ipa2g_on &&
+						band == IEEE80211_BAND_2GHZ) ||
+						(nphy->ipa5g_on &&
+						band == IEEE80211_BAND_5GHZ))
+						val = (band == IEEE80211_BAND_5GHZ) ? 0xC : 0xE;
+					else
+						val = 0x11;
+					reg = (i == 0) ? 0x2000 : 0x3000;
+					reg |= B2055_PADDRV;
+					b43_radio_write16(dev, reg, val);
+
+					reg = (i == 0) ?
+						B43_NPHY_AFECTL_OVER1 :
+						B43_NPHY_AFECTL_OVER;
+					b43_phy_set(dev, reg, 0x0200);
+				}
+			}
+		}
+	}
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSISel */
-- 
cgit v1.2.3


From 38bb902921dc31c15a707b74ebc6896438bb357e Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 20:18:05 +0100
Subject: b43: N-PHY: fix Cal TX IQ LO for newer PHYs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 0e04a2668ea3..1dace55d243a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -2229,7 +2229,17 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		(dev->phy.rev == 5 && nphy->ipa2g_on &&
 		b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ);
 	if (phy6or5x) {
-		/* TODO */
+		if (dev->phy.is_40mhz) {
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 0), 18,
+					tbl_tx_iqlo_cal_loft_ladder_40);
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 32), 18,
+					tbl_tx_iqlo_cal_iqimb_ladder_40);
+		} else {
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 0), 18,
+					tbl_tx_iqlo_cal_loft_ladder_20);
+			b43_ntab_write_bulk(dev, B43_NTAB16(15, 32), 18,
+					tbl_tx_iqlo_cal_iqimb_ladder_20);
+		}
 	}
 
 	b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8AA9);
-- 
cgit v1.2.3


From 52cb5e978f505ba6436dfe1867da0d2818fdb9b7 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 20:18:06 +0100
Subject: b43: N-PHY: add TX radio setup for newer PHYs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 53 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 1dace55d243a..78e0cf6c78ca 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1803,9 +1803,60 @@ static void b43_nphy_tx_cal_radio_setup(struct b43_wldev *dev)
 {
 	struct b43_phy_n *nphy = dev->phy.n;
 	u16 *save = nphy->tx_rx_cal_radio_saveregs;
+	u16 tmp;
+	u8 offset, i;
 
 	if (dev->phy.rev >= 3) {
-		/* TODO */
+	    for (i = 0; i < 2; i++) {
+		tmp = (i == 0) ? 0x2000 : 0x3000;
+		offset = i * 11;
+
+		save[offset + 0] = b43_radio_read16(dev, B2055_CAL_RVARCTL);
+		save[offset + 1] = b43_radio_read16(dev, B2055_CAL_LPOCTL);
+		save[offset + 2] = b43_radio_read16(dev, B2055_CAL_TS);
+		save[offset + 3] = b43_radio_read16(dev, B2055_CAL_RCCALRTS);
+		save[offset + 4] = b43_radio_read16(dev, B2055_CAL_RCALRTS);
+		save[offset + 5] = b43_radio_read16(dev, B2055_PADDRV);
+		save[offset + 6] = b43_radio_read16(dev, B2055_XOCTL1);
+		save[offset + 7] = b43_radio_read16(dev, B2055_XOCTL2);
+		save[offset + 8] = b43_radio_read16(dev, B2055_XOREGUL);
+		save[offset + 9] = b43_radio_read16(dev, B2055_XOMISC);
+		save[offset + 10] = b43_radio_read16(dev, B2055_PLL_LFC1);
+
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+			b43_radio_write16(dev, tmp | B2055_CAL_RVARCTL, 0x0A);
+			b43_radio_write16(dev, tmp | B2055_CAL_LPOCTL, 0x40);
+			b43_radio_write16(dev, tmp | B2055_CAL_TS, 0x55);
+			b43_radio_write16(dev, tmp | B2055_CAL_RCCALRTS, 0);
+			b43_radio_write16(dev, tmp | B2055_CAL_RCALRTS, 0);
+			if (nphy->ipa5g_on) {
+				b43_radio_write16(dev, tmp | B2055_PADDRV, 4);
+				b43_radio_write16(dev, tmp | B2055_XOCTL1, 1);
+			} else {
+				b43_radio_write16(dev, tmp | B2055_PADDRV, 0);
+				b43_radio_write16(dev, tmp | B2055_XOCTL1, 0x2F);
+			}
+			b43_radio_write16(dev, tmp | B2055_XOCTL2, 0);
+		} else {
+			b43_radio_write16(dev, tmp | B2055_CAL_RVARCTL, 0x06);
+			b43_radio_write16(dev, tmp | B2055_CAL_LPOCTL, 0x40);
+			b43_radio_write16(dev, tmp | B2055_CAL_TS, 0x55);
+			b43_radio_write16(dev, tmp | B2055_CAL_RCCALRTS, 0);
+			b43_radio_write16(dev, tmp | B2055_CAL_RCALRTS, 0);
+			b43_radio_write16(dev, tmp | B2055_XOCTL1, 0);
+			if (nphy->ipa2g_on) {
+				b43_radio_write16(dev, tmp | B2055_PADDRV, 6);
+				b43_radio_write16(dev, tmp | B2055_XOCTL2,
+					(dev->phy.rev < 5) ? 0x11 : 0x01);
+			} else {
+				b43_radio_write16(dev, tmp | B2055_PADDRV, 0);
+				b43_radio_write16(dev, tmp | B2055_XOCTL2, 0);
+			}
+		}
+		b43_radio_write16(dev, tmp | B2055_XOREGUL, 0);
+		b43_radio_write16(dev, tmp | B2055_XOMISC, 0);
+		b43_radio_write16(dev, tmp | B2055_PLL_LFC1, 0);
+	    }
 	} else {
 		save[0] = b43_radio_read16(dev, B2055_C1_TX_RF_IQCAL1);
 		b43_radio_write16(dev, B2055_C1_TX_RF_IQCAL1, 0x29);
-- 
cgit v1.2.3


From 9501fefec6aa9a3319bb61edb99851ba30653f30 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 30 Jan 2010 20:18:07 +0100
Subject: b43: N-PHY: implement setting RF sequence
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 35 +++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 78e0cf6c78ca..6392da25efed 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -64,6 +64,8 @@ enum b43_nphy_rf_sequence {
 	B43_RFSEQ_UPDATE_GAINU,
 };
 
+static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
+					u8 *events, u8 *delays, u8 length);
 static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
 				       enum b43_nphy_rf_sequence seq);
 
@@ -827,8 +829,8 @@ static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev)
 						B43_NPHY_TABLE_DATALO, 3 * j);
 			}
 
-			/* TODO: b43_nphy_set_rf_sequence(dev, 5,
-					rfseq_events, rfseq_delays, 3);*/
+			b43_nphy_set_rf_sequence(dev, 5,
+					rfseq_events, rfseq_delays, 3);
 			b43_phy_maskset(dev, B43_NPHY_OVER_DGAIN1,
 				(u16)~B43_NPHY_OVER_DGAIN_CCKDGECV,
 				0x5A << B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT);
@@ -911,8 +913,8 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 			delays1[0] = 0x1;
 			delays1[5] = 0x14;
 		}
-		/*TODO:b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);*/
-		/*TODO:b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);*/
+		b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);
+		b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);
 
 		b43_nphy_gain_crtl_workarounds(dev);
 
@@ -1131,6 +1133,31 @@ static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, false);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SetRfSeq */
+static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
+					u8 *events, u8 *delays, u8 length)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u8 i;
+	u8 end = (dev->phy.rev >= 3) ? 0x1F : 0x0F;
+	u16 offset1 = cmd << 4;
+	u16 offset2 = offset1 + 0x80;
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, true);
+
+	b43_ntab_write_bulk(dev, B43_NTAB8(7, offset1), length, events);
+	b43_ntab_write_bulk(dev, B43_NTAB8(7, offset2), length, delays);
+
+	for (i = length; i < 16; i++) {
+		b43_ntab_write(dev, B43_NTAB8(7, offset1 + i), end);
+		b43_ntab_write(dev, B43_NTAB8(7, offset2 + i), 1);
+	}
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, false);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ForceRFSeq */
 static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
 				       enum b43_nphy_rf_sequence seq)
-- 
cgit v1.2.3


From e389900ed31975f3ce091764bf394b045058dad1 Mon Sep 17 00:00:00 2001
From: Hamish Guthrie <hamish.guthrie@sonycom.com>
Date: Mon, 1 Feb 2010 17:42:38 +0100
Subject: ps3_gelic_wireless: Remove superfluous debug info

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/ps3_gelic_wireless.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 448c5b6789d3..2663b2fdc0bb 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1449,8 +1449,7 @@ static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan,
 	void *buf = NULL;
 	size_t len;
 
-	pr_debug("%s: <- always=%d essid_len=%z\n", __func__,
-		 always_scan, essid_len);
+	pr_debug("%s: <- always=%d\n", __func__, always_scan);
 	if (mutex_lock_interruptible(&wl->scan_lock))
 		return -ERESTARTSYS;
 
-- 
cgit v1.2.3


From ab5132a26236e308c6d3d832a3e04fca351656d8 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Sat, 30 Jan 2010 21:37:24 -0500
Subject: ath9k: fix access to freed data on unload

Calling ath_bus_cleanup() after ieee80211_free_hw() resulted in access
to common->bus_ops, which is already freed as part of the device data.

Remove the cleanup field in struct ath_bus_ops, as it was never used
properly.  Remove ath_bus_cleanup().  Merge cleanup functions in place
of the ath_bus_cleanup() calls.  Take care not to use any device data
after ieee80211_free_hw().

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath.h         |  1 -
 drivers/net/wireless/ath/ath9k/ahb.c   | 12 ++----------
 drivers/net/wireless/ath/ath9k/ath9k.h |  5 -----
 drivers/net/wireless/ath/ath9k/pci.c   | 18 +++++-------------
 4 files changed, 7 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 9e05648356fe..71fc960814f0 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -74,7 +74,6 @@ struct ath_common;
 
 struct ath_bus_ops {
 	void		(*read_cachesize)(struct ath_common *common, int *csz);
-	void		(*cleanup)(struct ath_common *common);
 	bool		(*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
 	void		(*bt_coex_prep)(struct ath_common *common);
 };
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 9e62a569e816..ca4994f13151 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -27,12 +27,6 @@ static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
 	*csz = L1_CACHE_BYTES >> 2;
 }
 
-static void ath_ahb_cleanup(struct ath_common *common)
-{
-	struct ath_softc *sc = (struct ath_softc *)common->priv;
-	iounmap(sc->mem);
-}
-
 static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
 	struct ath_softc *sc = (struct ath_softc *)common->priv;
@@ -54,8 +48,6 @@ static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 
 static struct ath_bus_ops ath_ahb_bus_ops  = {
 	.read_cachesize = ath_ahb_read_cachesize,
-	.cleanup = ath_ahb_cleanup,
-
 	.eeprom_read = ath_ahb_eeprom_read,
 };
 
@@ -164,12 +156,12 @@ static int ath_ahb_remove(struct platform_device *pdev)
 	if (hw) {
 		struct ath_wiphy *aphy = hw->priv;
 		struct ath_softc *sc = aphy->sc;
-		struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+		void __iomem *mem = sc->mem;
 
 		ath9k_deinit_device(sc);
 		free_irq(sc->irq, sc);
 		ieee80211_free_hw(sc->hw);
-		ath_bus_cleanup(common);
+		iounmap(mem);
 		platform_set_drvdata(pdev, NULL);
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 3f8a7e773d55..0ea340fd071c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -538,11 +538,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 	common->bus_ops->read_cachesize(common, csz);
 }
 
-static inline void ath_bus_cleanup(struct ath_common *common)
-{
-	common->bus_ops->cleanup(common);
-}
-
 extern struct ieee80211_ops ath9k_ops;
 extern int modparam_nohwcrypt;
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 4ae7b5f12029..f2afcbefc076 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -49,16 +49,6 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
 		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
 }
 
-static void ath_pci_cleanup(struct ath_common *common)
-{
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-	struct pci_dev *pdev = to_pci_dev(sc->dev);
-
-	pci_iounmap(pdev, sc->mem);
-	pci_disable_device(pdev);
-	pci_release_region(pdev, 0);
-}
-
 static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
 	struct ath_hw *ah = (struct ath_hw *) common->ah;
@@ -98,7 +88,6 @@ static void ath_pci_bt_coex_prep(struct ath_common *common)
 
 static const struct ath_bus_ops ath_pci_bus_ops = {
 	.read_cachesize = ath_pci_read_cachesize,
-	.cleanup = ath_pci_cleanup,
 	.eeprom_read = ath_pci_eeprom_read,
 	.bt_coex_prep = ath_pci_bt_coex_prep,
 };
@@ -245,12 +234,15 @@ static void ath_pci_remove(struct pci_dev *pdev)
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	void __iomem *mem = sc->mem;
 
 	ath9k_deinit_device(sc);
 	free_irq(sc->irq, sc);
 	ieee80211_free_hw(sc->hw);
-	ath_bus_cleanup(common);
+
+	pci_iounmap(pdev, mem);
+	pci_disable_device(pdev);
+	pci_release_region(pdev, 0);
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.3


From 2a6ace1b3d4dc65401e71fc01af100692b9f27f8 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 2 Feb 2010 07:47:56 -0800
Subject: net/irda: sh_sir: Add SuperH IrDA driver

This is very simple IrDA SIR driver for SuperH.
This driver was tested by irdaping/ircp on SH7724 EcoVec24 board

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/irda/Kconfig  |  10 +
 drivers/net/irda/Makefile |   1 +
 drivers/net/irda/sh_sir.c | 823 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 834 insertions(+)
 create mode 100644 drivers/net/irda/sh_sir.c

(limited to 'drivers/net')

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index f76384221422..af10e97345ce 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -64,6 +64,16 @@ endchoice
 
 comment "Dongle support"
 
+config SH_SIR
+	tristate "SuperH SIR on UART"
+	depends on IRDA && SUPERH && \
+		(CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
+		 CPU_SUBTYPE_SH7724)
+	default n
+	help
+	  Say Y here if your want to enable SIR function on SuperH UART
+	  devices.
+
 config DONGLE
 	bool "Serial dongle support"
 	depends on IRTTY_SIR
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index d82e1e3bd8c8..e030d47e2793 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
 # SIR drivers
 obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
 obj-$(CONFIG_BFIN_SIR)		+= bfin_sir.o
+obj-$(CONFIG_SH_SIR)		+= sh_sir.o
 # dongle drivers for SIR drivers
 obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
 obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram-sir.o
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
new file mode 100644
index 000000000000..d7c983dc91ad
--- /dev/null
+++ b/drivers/net/irda/sh_sir.c
@@ -0,0 +1,823 @@
+/*
+ * SuperH IrDA Driver
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on bfin_sir.c
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+#include <asm/clock.h>
+
+#define DRIVER_NAME "sh_sir"
+
+#define RX_PHASE	(1 << 0)
+#define TX_PHASE	(1 << 1)
+#define TX_COMP_PHASE	(1 << 2) /* tx complete */
+#define NONE_PHASE	(1 << 31)
+
+#define IRIF_RINTCLR	0x0016 /* DMA rx interrupt source clear */
+#define IRIF_TINTCLR	0x0018 /* DMA tx interrupt source clear */
+#define IRIF_SIR0	0x0020 /* IrDA-SIR10 control */
+#define IRIF_SIR1	0x0022 /* IrDA-SIR10 baudrate error correction */
+#define IRIF_SIR2	0x0024 /* IrDA-SIR10 baudrate count */
+#define IRIF_SIR3	0x0026 /* IrDA-SIR10 status */
+#define IRIF_SIR_FRM	0x0028 /* Hardware frame processing set */
+#define IRIF_SIR_EOF	0x002A /* EOF value */
+#define IRIF_SIR_FLG	0x002C /* Flag clear */
+#define IRIF_UART_STS2	0x002E /* UART status 2 */
+#define IRIF_UART0	0x0030 /* UART control */
+#define IRIF_UART1	0x0032 /* UART status */
+#define IRIF_UART2	0x0034 /* UART mode */
+#define IRIF_UART3	0x0036 /* UART transmit data */
+#define IRIF_UART4	0x0038 /* UART receive data */
+#define IRIF_UART5	0x003A /* UART interrupt mask */
+#define IRIF_UART6	0x003C /* UART baud rate error correction */
+#define IRIF_UART7	0x003E /* UART baud rate count set */
+#define IRIF_CRC0	0x0040 /* CRC engine control */
+#define IRIF_CRC1	0x0042 /* CRC engine input data */
+#define IRIF_CRC2	0x0044 /* CRC engine calculation */
+#define IRIF_CRC3	0x0046 /* CRC engine output data 1 */
+#define IRIF_CRC4	0x0048 /* CRC engine output data 2 */
+
+/* IRIF_SIR0 */
+#define IRTPW		(1 << 1) /* transmit pulse width select */
+#define IRERRC		(1 << 0) /* Clear receive pulse width error */
+
+/* IRIF_SIR3 */
+#define IRERR		(1 << 0) /* received pulse width Error */
+
+/* IRIF_SIR_FRM */
+#define EOFD		(1 << 9) /* EOF detection flag */
+#define FRER		(1 << 8) /* Frame Error bit */
+#define FRP		(1 << 0) /* Frame processing set */
+
+/* IRIF_UART_STS2 */
+#define IRSME		(1 << 6) /* Receive Sum     Error flag */
+#define IROVE		(1 << 5) /* Receive Overrun Error flag */
+#define IRFRE		(1 << 4) /* Receive Framing Error flag */
+#define IRPRE		(1 << 3) /* Receive Parity  Error flag */
+
+/* IRIF_UART0_*/
+#define TBEC		(1 << 2) /* Transmit Data Clear */
+#define RIE		(1 << 1) /* Receive Enable */
+#define TIE		(1 << 0) /* Transmit Enable */
+
+/* IRIF_UART1 */
+#define URSME		(1 << 6) /* Receive Sum Error Flag */
+#define UROVE		(1 << 5) /* Receive Overrun Error Flag */
+#define URFRE		(1 << 4) /* Receive Framing Error Flag */
+#define URPRE		(1 << 3) /* Receive Parity Error Flag */
+#define RBF		(1 << 2) /* Receive Buffer Full Flag */
+#define TSBE		(1 << 1) /* Transmit Shift Buffer Empty Flag */
+#define TBE		(1 << 0) /* Transmit Buffer Empty flag */
+#define TBCOMP		(TSBE | TBE)
+
+/* IRIF_UART5 */
+#define RSEIM		(1 << 6) /* Receive Sum Error Flag IRQ Mask */
+#define RBFIM		(1 << 2) /* Receive Buffer Full Flag IRQ Mask */
+#define TSBEIM		(1 << 1) /* Transmit Shift Buffer Empty Flag IRQ Mask */
+#define TBEIM		(1 << 0) /* Transmit Buffer Empty Flag IRQ Mask */
+#define RX_MASK		(RSEIM  | RBFIM)
+
+/* IRIF_CRC0 */
+#define CRC_RST		(1 << 15) /* CRC Engine Reset */
+#define CRC_CT_MASK	0x0FFF
+
+/************************************************************************
+
+
+			structure
+
+
+************************************************************************/
+struct sh_sir_self {
+	void __iomem		*membase;
+	unsigned int		 irq;
+	struct clk		*clk;
+
+	struct net_device	*ndev;
+
+	struct irlap_cb		*irlap;
+	struct qos_info		qos;
+
+	iobuff_t		tx_buff;
+	iobuff_t		rx_buff;
+};
+
+/************************************************************************
+
+
+			common function
+
+
+************************************************************************/
+static void sh_sir_write(struct sh_sir_self *self, u32 offset, u16 data)
+{
+	iowrite16(data, self->membase + offset);
+}
+
+static u16 sh_sir_read(struct sh_sir_self *self, u32 offset)
+{
+	return ioread16(self->membase + offset);
+}
+
+static void sh_sir_update_bits(struct sh_sir_self *self, u32 offset,
+			       u16 mask, u16 data)
+{
+	u16 old, new;
+
+	old = sh_sir_read(self, offset);
+	new = (old & ~mask) | data;
+	if (old != new)
+		sh_sir_write(self, offset, new);
+}
+
+/************************************************************************
+
+
+			CRC function
+
+
+************************************************************************/
+static void sh_sir_crc_reset(struct sh_sir_self *self)
+{
+	sh_sir_write(self, IRIF_CRC0, CRC_RST);
+}
+
+static void sh_sir_crc_add(struct sh_sir_self *self, u8 data)
+{
+	sh_sir_write(self, IRIF_CRC1, (u16)data);
+}
+
+static u16 sh_sir_crc_cnt(struct sh_sir_self *self)
+{
+	return CRC_CT_MASK & sh_sir_read(self, IRIF_CRC0);
+}
+
+static u16 sh_sir_crc_out(struct sh_sir_self *self)
+{
+	return sh_sir_read(self, IRIF_CRC4);
+}
+
+static int sh_sir_crc_init(struct sh_sir_self *self)
+{
+	struct device *dev = &self->ndev->dev;
+	int ret = -EIO;
+	u16 val;
+
+	sh_sir_crc_reset(self);
+
+	sh_sir_crc_add(self, 0xCC);
+	sh_sir_crc_add(self, 0xF5);
+	sh_sir_crc_add(self, 0xF1);
+	sh_sir_crc_add(self, 0xA7);
+
+	val = sh_sir_crc_cnt(self);
+	if (4 != val) {
+		dev_err(dev, "CRC count error %x\n", val);
+		goto crc_init_out;
+	}
+
+	val = sh_sir_crc_out(self);
+	if (0x51DF != val) {
+		dev_err(dev, "CRC result error%x\n", val);
+		goto crc_init_out;
+	}
+
+	ret = 0;
+
+crc_init_out:
+
+	sh_sir_crc_reset(self);
+	return ret;
+}
+
+/************************************************************************
+
+
+			baud rate functions
+
+
+************************************************************************/
+#define SCLK_BASE 1843200 /* 1.8432MHz */
+
+static u32 sh_sir_find_sclk(struct clk *irda_clk)
+{
+	struct cpufreq_frequency_table *freq_table = irda_clk->freq_table;
+	struct clk *pclk = clk_get(NULL, "peripheral_clk");
+	u32 limit, min = 0xffffffff, tmp;
+	int i, index = 0;
+
+	limit = clk_get_rate(pclk);
+	clk_put(pclk);
+
+	/* IrDA can not set over peripheral_clk */
+	for (i = 0;
+	     freq_table[i].frequency != CPUFREQ_TABLE_END;
+	     i++) {
+		u32 freq = freq_table[i].frequency;
+
+		if (freq == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		/* IrDA should not over peripheral_clk */
+		if (freq > limit)
+			continue;
+
+		tmp = freq % SCLK_BASE;
+		if (tmp < min) {
+			min = tmp;
+			index = i;
+		}
+	}
+
+	return freq_table[index].frequency;
+}
+
+#define ERR_ROUNDING(a) ((a + 5000) / 10000)
+static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate)
+{
+	struct clk *clk;
+	struct device *dev = &self->ndev->dev;
+	u32 rate;
+	u16 uabca, uabc;
+	u16 irbca, irbc;
+	u32 min, rerr, tmp;
+	int i;
+
+	/* Baud Rate Error Correction x 10000 */
+	u32 rate_err_array[] = {
+		0000, 0625, 1250, 1875,
+		2500, 3125, 3750, 4375,
+		5000, 5625, 6250, 6875,
+		7500, 8125, 8750, 9375,
+	};
+
+	/*
+	 * FIXME
+	 *
+	 * it support 9600 only now
+	 */
+	switch (baudrate) {
+	case 9600:
+		break;
+	default:
+		dev_err(dev, "un-supported baudrate %d\n", baudrate);
+		return -EIO;
+	}
+
+	clk = clk_get(NULL, "irda_clk");
+	if (!clk) {
+		dev_err(dev, "can not get irda_clk\n");
+		return -EIO;
+	}
+
+	clk_set_rate(clk, sh_sir_find_sclk(clk));
+	rate = clk_get_rate(clk);
+	clk_put(clk);
+
+	dev_dbg(dev, "selected sclk = %d\n", rate);
+
+	/*
+	 * CALCULATION
+	 *
+	 * 1843200 = system rate / (irbca + (irbc + 1))
+	 */
+
+	irbc = rate / SCLK_BASE;
+
+	tmp = rate - (SCLK_BASE * irbc);
+	tmp *= 10000;
+
+	rerr = tmp / SCLK_BASE;
+
+	min = 0xffffffff;
+	irbca = 0;
+	for (i = 0; i < ARRAY_SIZE(rate_err_array); i++) {
+		tmp = abs(rate_err_array[i] - rerr);
+		if (min > tmp) {
+			min = tmp;
+			irbca = i;
+		}
+	}
+
+	tmp = rate / (irbc + ERR_ROUNDING(rate_err_array[irbca]));
+	if ((SCLK_BASE / 100) < abs(tmp - SCLK_BASE))
+		dev_warn(dev, "IrDA freq error margin over %d\n", tmp);
+
+	dev_dbg(dev, "target = %d, result = %d, infrared = %d.%d\n",
+	       SCLK_BASE, tmp, irbc, rate_err_array[irbca]);
+
+	irbca = (irbca & 0xF) << 4;
+	irbc  = (irbc - 1) & 0xF;
+
+	if (!irbc) {
+		dev_err(dev, "sh_sir can not set 0 in IRIF_SIR2\n");
+		return -EIO;
+	}
+
+	sh_sir_write(self, IRIF_SIR0, IRTPW | IRERRC);
+	sh_sir_write(self, IRIF_SIR1, irbca);
+	sh_sir_write(self, IRIF_SIR2, irbc);
+
+	/*
+	 * CALCULATION
+	 *
+	 * BaudRate[bps] = system rate / (uabca + (uabc + 1) x 16)
+	 */
+
+	uabc = rate / baudrate;
+	uabc = (uabc / 16) - 1;
+	uabc = (uabc + 1) * 16;
+
+	tmp = rate - (uabc * baudrate);
+	tmp *= 10000;
+
+	rerr = tmp / baudrate;
+
+	min = 0xffffffff;
+	uabca = 0;
+	for (i = 0; i < ARRAY_SIZE(rate_err_array); i++) {
+		tmp = abs(rate_err_array[i] - rerr);
+		if (min > tmp) {
+			min = tmp;
+			uabca = i;
+		}
+	}
+
+	tmp = rate / (uabc + ERR_ROUNDING(rate_err_array[uabca]));
+	if ((baudrate / 100) < abs(tmp - baudrate))
+		dev_warn(dev, "UART freq error margin over %d\n", tmp);
+
+	dev_dbg(dev, "target = %d, result = %d, uart = %d.%d\n",
+	       baudrate, tmp,
+	       uabc, rate_err_array[uabca]);
+
+	uabca = (uabca & 0xF) << 4;
+	uabc  = (uabc / 16) - 1;
+
+	sh_sir_write(self, IRIF_UART6, uabca);
+	sh_sir_write(self, IRIF_UART7, uabc);
+
+	return 0;
+}
+
+/************************************************************************
+
+
+			iobuf function
+
+
+************************************************************************/
+static int __sh_sir_init_iobuf(iobuff_t *io, int size)
+{
+	io->head = kmalloc(size, GFP_KERNEL);
+	if (!io->head)
+		return -ENOMEM;
+
+	io->truesize	= size;
+	io->in_frame	= FALSE;
+	io->state	= OUTSIDE_FRAME;
+	io->data	= io->head;
+
+	return 0;
+}
+
+static void sh_sir_remove_iobuf(struct sh_sir_self *self)
+{
+	kfree(self->rx_buff.head);
+	kfree(self->tx_buff.head);
+
+	self->rx_buff.head = NULL;
+	self->tx_buff.head = NULL;
+}
+
+static int sh_sir_init_iobuf(struct sh_sir_self *self, int rxsize, int txsize)
+{
+	int err = -ENOMEM;
+
+	if (self->rx_buff.head ||
+	    self->tx_buff.head) {
+		dev_err(&self->ndev->dev, "iobuff has already existed.");
+		return err;
+	}
+
+	err = __sh_sir_init_iobuf(&self->rx_buff, rxsize);
+	if (err)
+		goto iobuf_err;
+
+	err = __sh_sir_init_iobuf(&self->tx_buff, txsize);
+
+iobuf_err:
+	if (err)
+		sh_sir_remove_iobuf(self);
+
+	return err;
+}
+
+/************************************************************************
+
+
+			status function
+
+
+************************************************************************/
+static void sh_sir_clear_all_err(struct sh_sir_self *self)
+{
+	/* Clear error flag for receive pulse width */
+	sh_sir_update_bits(self, IRIF_SIR0, IRERRC, IRERRC);
+
+	/* Clear frame / EOF error flag */
+	sh_sir_write(self, IRIF_SIR_FLG, 0xffff);
+
+	/* Clear all status error */
+	sh_sir_write(self, IRIF_UART_STS2, 0);
+}
+
+static void sh_sir_set_phase(struct sh_sir_self *self, int phase)
+{
+	u16 uart5 = 0;
+	u16 uart0 = 0;
+
+	switch (phase) {
+	case TX_PHASE:
+		uart5 = TBEIM;
+		uart0 = TBEC | TIE;
+		break;
+	case TX_COMP_PHASE:
+		uart5 = TSBEIM;
+		uart0 = TIE;
+		break;
+	case RX_PHASE:
+		uart5 = RX_MASK;
+		uart0 = RIE;
+		break;
+	default:
+		break;
+	}
+
+	sh_sir_write(self, IRIF_UART5, uart5);
+	sh_sir_write(self, IRIF_UART0, uart0);
+}
+
+static int sh_sir_is_which_phase(struct sh_sir_self *self)
+{
+	u16 val = sh_sir_read(self, IRIF_UART5);
+
+	if (val & TBEIM)
+		return TX_PHASE;
+
+	if (val & TSBEIM)
+		return TX_COMP_PHASE;
+
+	if (val & RX_MASK)
+		return RX_PHASE;
+
+	return NONE_PHASE;
+}
+
+static void sh_sir_tx(struct sh_sir_self *self, int phase)
+{
+	switch (phase) {
+	case TX_PHASE:
+		if (0 >= self->tx_buff.len) {
+			sh_sir_set_phase(self, TX_COMP_PHASE);
+		} else {
+			sh_sir_write(self, IRIF_UART3, self->tx_buff.data[0]);
+			self->tx_buff.len--;
+			self->tx_buff.data++;
+		}
+		break;
+	case TX_COMP_PHASE:
+		sh_sir_set_phase(self, RX_PHASE);
+		netif_wake_queue(self->ndev);
+		break;
+	default:
+		dev_err(&self->ndev->dev, "should not happen\n");
+		break;
+	}
+}
+
+static int sh_sir_read_data(struct sh_sir_self *self)
+{
+	u16 val;
+	int timeout = 1024;
+
+	while (timeout--) {
+		val = sh_sir_read(self, IRIF_UART1);
+
+		/* data get */
+		if (val & RBF) {
+			if (val & (URSME | UROVE | URFRE | URPRE))
+				break;
+
+			return (int)sh_sir_read(self, IRIF_UART4);
+		}
+
+		udelay(1);
+	}
+
+	dev_err(&self->ndev->dev, "UART1 %04x : STATUS %04x\n",
+		val, sh_sir_read(self, IRIF_UART_STS2));
+
+	/* read data register for clear error */
+	sh_sir_read(self, IRIF_UART4);
+
+	return -1;
+}
+
+static void sh_sir_rx(struct sh_sir_self *self)
+{
+	int timeout = 1024;
+	int data;
+
+	while (timeout--) {
+		data = sh_sir_read_data(self);
+		if (data < 0)
+			break;
+
+		async_unwrap_char(self->ndev, &self->ndev->stats,
+				  &self->rx_buff, (u8)data);
+		self->ndev->last_rx = jiffies;
+
+		if (EOFD & sh_sir_read(self, IRIF_SIR_FRM))
+			continue;
+
+		break;
+	}
+}
+
+static irqreturn_t sh_sir_irq(int irq, void *dev_id)
+{
+	struct sh_sir_self *self = dev_id;
+	struct device *dev = &self->ndev->dev;
+	int phase = sh_sir_is_which_phase(self);
+
+	switch (phase) {
+	case TX_COMP_PHASE:
+	case TX_PHASE:
+		sh_sir_tx(self, phase);
+		break;
+	case RX_PHASE:
+		if (sh_sir_read(self, IRIF_SIR3))
+			dev_err(dev, "rcv pulse width error occurred\n");
+
+		sh_sir_rx(self);
+		sh_sir_clear_all_err(self);
+		break;
+	default:
+		dev_err(dev, "unknown interrupt\n");
+	}
+
+	 return IRQ_HANDLED;
+}
+
+/************************************************************************
+
+
+			net_device_ops function
+
+
+************************************************************************/
+static int sh_sir_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct sh_sir_self *self = netdev_priv(ndev);
+	int speed = irda_get_next_speed(skb);
+
+	if ((0 < speed) &&
+	    (9600 != speed)) {
+		dev_err(&ndev->dev, "support 9600 only (%d)\n", speed);
+		return -EIO;
+	}
+
+	netif_stop_queue(ndev);
+
+	self->tx_buff.data = self->tx_buff.head;
+	self->tx_buff.len = 0;
+	if (skb->len)
+		self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+						   self->tx_buff.truesize);
+
+	sh_sir_set_phase(self, TX_PHASE);
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+static int sh_sir_ioctl(struct net_device *ndev, struct ifreq *ifreq, int cmd)
+{
+	/*
+	 * FIXME
+	 *
+	 * This function is needed for irda framework.
+	 * But nothing to do now
+	 */
+	return 0;
+}
+
+static struct net_device_stats *sh_sir_stats(struct net_device *ndev)
+{
+	struct sh_sir_self *self = netdev_priv(ndev);
+
+	return &self->ndev->stats;
+}
+
+static int sh_sir_open(struct net_device *ndev)
+{
+	struct sh_sir_self *self = netdev_priv(ndev);
+	int err;
+
+	clk_enable(self->clk);
+	err = sh_sir_crc_init(self);
+	if (err)
+		goto open_err;
+
+	sh_sir_set_baudrate(self, 9600);
+
+	self->irlap = irlap_open(ndev, &self->qos, DRIVER_NAME);
+	if (!self->irlap)
+		goto open_err;
+
+	/*
+	 * Now enable the interrupt then start the queue
+	 */
+	sh_sir_update_bits(self, IRIF_SIR_FRM, FRP, FRP);
+	sh_sir_read(self, IRIF_UART1); /* flag clear */
+	sh_sir_read(self, IRIF_UART4); /* flag clear */
+	sh_sir_set_phase(self, RX_PHASE);
+
+	netif_start_queue(ndev);
+
+	dev_info(&self->ndev->dev, "opened\n");
+
+	return 0;
+
+open_err:
+	clk_disable(self->clk);
+
+	return err;
+}
+
+static int sh_sir_stop(struct net_device *ndev)
+{
+	struct sh_sir_self *self = netdev_priv(ndev);
+
+	/* Stop IrLAP */
+	if (self->irlap) {
+		irlap_close(self->irlap);
+		self->irlap = NULL;
+	}
+
+	netif_stop_queue(ndev);
+
+	dev_info(&ndev->dev, "stoped\n");
+
+	return 0;
+}
+
+static const struct net_device_ops sh_sir_ndo = {
+	.ndo_open		= sh_sir_open,
+	.ndo_stop		= sh_sir_stop,
+	.ndo_start_xmit		= sh_sir_hard_xmit,
+	.ndo_do_ioctl		= sh_sir_ioctl,
+	.ndo_get_stats		= sh_sir_stats,
+};
+
+/************************************************************************
+
+
+			platform_driver function
+
+
+************************************************************************/
+static int __devinit sh_sir_probe(struct platform_device *pdev)
+{
+	struct net_device *ndev;
+	struct sh_sir_self *self;
+	struct resource *res;
+	char clk_name[8];
+	void __iomem *base;
+	unsigned int irq;
+	int err = -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!res || irq < 0) {
+		dev_err(&pdev->dev, "Not enough platform resources.\n");
+		goto exit;
+	}
+
+	ndev = alloc_irdadev(sizeof(*self));
+	if (!ndev)
+		goto exit;
+
+	base = ioremap_nocache(res->start, resource_size(res));
+	if (!base) {
+		err = -ENXIO;
+		dev_err(&pdev->dev, "Unable to ioremap.\n");
+		goto err_mem_1;
+	}
+
+	self = netdev_priv(ndev);
+	err = sh_sir_init_iobuf(self, IRDA_SKB_MAX_MTU, IRDA_SIR_MAX_FRAME);
+	if (err)
+		goto err_mem_2;
+
+	snprintf(clk_name, sizeof(clk_name), "irda%d", pdev->id);
+	self->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(self->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		goto err_mem_3;
+	}
+
+	irda_init_max_qos_capabilies(&self->qos);
+
+	ndev->netdev_ops	= &sh_sir_ndo;
+	ndev->irq		= irq;
+
+	self->membase			= base;
+	self->ndev			= ndev;
+	self->qos.baud_rate.bits	&= IR_9600; /* FIXME */
+	self->qos.min_turn_time.bits	= 1; /* 10 ms or more */
+
+	irda_qos_bits_to_value(&self->qos);
+
+	err = register_netdev(ndev);
+	if (err)
+		goto err_mem_4;
+
+	platform_set_drvdata(pdev, ndev);
+
+	if (request_irq(irq, sh_sir_irq, IRQF_DISABLED, "sh_sir", self)) {
+		dev_warn(&pdev->dev, "Unable to attach sh_sir interrupt\n");
+		goto err_mem_4;
+	}
+
+	dev_info(&pdev->dev, "SuperH IrDA probed\n");
+
+	goto exit;
+
+err_mem_4:
+	clk_put(self->clk);
+err_mem_3:
+	sh_sir_remove_iobuf(self);
+err_mem_2:
+	iounmap(self->membase);
+err_mem_1:
+	free_netdev(ndev);
+exit:
+	return err;
+}
+
+static int __devexit sh_sir_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct sh_sir_self *self = netdev_priv(ndev);
+
+	if (!self)
+		return 0;
+
+	unregister_netdev(ndev);
+	clk_put(self->clk);
+	sh_sir_remove_iobuf(self);
+	iounmap(self->membase);
+	free_netdev(ndev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sh_sir_driver = {
+	.probe   = sh_sir_probe,
+	.remove  = __devexit_p(sh_sir_remove),
+	.driver  = {
+		.name = DRIVER_NAME,
+	},
+};
+
+static int __init sh_sir_init(void)
+{
+	return platform_driver_register(&sh_sir_driver);
+}
+
+static void __exit sh_sir_exit(void)
+{
+	platform_driver_unregister(&sh_sir_driver);
+}
+
+module_init(sh_sir_init);
+module_exit(sh_sir_exit);
+
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
+MODULE_DESCRIPTION("SuperH IrDA driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 55bdeed9f67a92f184e1ddcdd722e622d9dd10c6 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Tue, 2 Feb 2010 07:48:40 -0800
Subject: be2net: use eq-id to calculate cev-isr reg offset

cev-isr reg offset for each function is better calculated using (any) eq-id
alloted to that function instead of using pci-func number(which
does not work in some configurations...)

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 6f2633887dc3..626b76c0ebc7 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1350,7 +1350,7 @@ static irqreturn_t be_intx(int irq, void *dev)
 	int isr;
 
 	isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
-			be_pci_func(adapter) * CEV_ISR_SIZE);
+		(adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE);
 	if (!isr)
 		return IRQ_NONE;
 
-- 
cgit v1.2.3


From f09c256375c7cf1e112b8ef6306cdd313490d7c0 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue, 2 Feb 2010 15:34:50 +0100
Subject: airo: fix setting zero length WEP key

Patch prevents call set_wep_key() with zero key length. That fix long
standing regression since commit c0380693520b1a1e4f756799a0edc379378b462a
"airo: clean up WEP key operations". Additionally print call trace when
someone will try to use improper parameters, and remove key.len = 0
assignment, because it is in not possible code path.

Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
Bisected-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
Tested-by: Chris Siebenmann <cks@cs.toronto.edu>
Cc: Dan Williams <dcbw@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/airo.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4331d675fcc6..2a9f029a3c74 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5254,11 +5254,7 @@ static int set_wep_key(struct airo_info *ai, u16 index, const char *key,
 	WepKeyRid wkr;
 	int rc;
 
-	if (keylen == 0) {
-		airo_print_err(ai->dev->name, "%s: key length to set was zero",
-			       __func__);
-		return -1;
-	}
+	WARN_ON(keylen == 0);
 
 	memset(&wkr, 0, sizeof(wkr));
 	wkr.len = cpu_to_le16(sizeof(wkr));
@@ -6405,11 +6401,7 @@ static int airo_set_encode(struct net_device *dev,
 		if (dwrq->length > MIN_KEY_SIZE)
 			key.len = MAX_KEY_SIZE;
 		else
-			if (dwrq->length > 0)
-				key.len = MIN_KEY_SIZE;
-			else
-				/* Disable the key */
-				key.len = 0;
+			key.len = MIN_KEY_SIZE;
 		/* Check if the key is not marked as invalid */
 		if(!(dwrq->flags & IW_ENCODE_NOKEY)) {
 			/* Cleanup */
@@ -6590,12 +6582,22 @@ static int airo_set_encodeext(struct net_device *dev,
 		default:
 			return -EINVAL;
 		}
-		/* Send the key to the card */
-		rc = set_wep_key(local, idx, key.key, key.len, perm, 1);
-		if (rc < 0) {
-			airo_print_err(local->dev->name, "failed to set WEP key"
-			               " at index %d: %d.", idx, rc);
-			return rc;
+		if (key.len == 0) {
+			rc = set_wep_tx_idx(local, idx, perm, 1);
+			if (rc < 0) {
+				airo_print_err(local->dev->name,
+					       "failed to set WEP transmit index to %d: %d.",
+					       idx, rc);
+				return rc;
+			}
+		} else {
+			rc = set_wep_key(local, idx, key.key, key.len, perm, 1);
+			if (rc < 0) {
+				airo_print_err(local->dev->name,
+					       "failed to set WEP key at index %d: %d.",
+					       idx, rc);
+				return rc;
+			}
 		}
 	}
 
-- 
cgit v1.2.3


From 5ffaf8a361b4c9025963959a744f21d8173c7669 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Tue, 2 Feb 2010 11:58:33 -0500
Subject: ath9k: add support for 802.11n bonded out AR2427

Some single chip family devices are sold in the market with
802.11n bonded out, these have no hardware capability for
802.11n but ath9k can still support them. These are called
AR2427.

Cc: stable@kernel.org
Reported-by: Rolf Leggewie <bugzilla.kernel.org@rolf.leggewie.biz>
Tested-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c   | 7 ++++++-
 drivers/net/wireless/ath/ath9k/hw.h   | 1 +
 drivers/net/wireless/ath/ath9k/init.c | 4 +++-
 drivers/net/wireless/ath/ath9k/pci.c  | 1 +
 4 files changed, 11 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 0b1dd10f1d84..0b1b88ffa497 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -334,7 +334,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 	ah->config.pcie_clock_req = 0;
 	ah->config.pcie_waen = 0;
 	ah->config.analog_shiftreg = 1;
-	ah->config.ht_enable = 1;
 	ah->config.ofdm_trig_low = 200;
 	ah->config.ofdm_trig_high = 500;
 	ah->config.cck_trig_high = 200;
@@ -346,6 +345,11 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 		ah->config.spurchans[i][1] = AR_NO_SPUR;
 	}
 
+	if (ah->hw_version.devid != AR2427_DEVID_PCIE)
+		ah->config.ht_enable = 1;
+	else
+		ah->config.ht_enable = 0;
+
 	ah->config.rx_intr_mitigation = true;
 
 	/*
@@ -542,6 +546,7 @@ static bool ath9k_hw_devid_supported(u16 devid)
 	case AR5416_DEVID_AR9287_PCI:
 	case AR5416_DEVID_AR9287_PCIE:
 	case AR9271_USB:
+	case AR2427_DEVID_PCIE:
 		return true;
 	default:
 		break;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index ab1f1981d857..dbbf7ca5f97d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -40,6 +40,7 @@
 #define AR9280_DEVID_PCI	0x0029
 #define AR9280_DEVID_PCIE	0x002a
 #define AR9285_DEVID_PCIE	0x002b
+#define AR2427_DEVID_PCIE	0x002c
 
 #define AR5416_AR9100_DEVID	0x000b
 
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index c3066b553546..4b5e54848683 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -620,11 +620,13 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_AMPDU_AGGREGATION |
 		IEEE80211_HW_SUPPORTS_PS |
 		IEEE80211_HW_PS_NULLFUNC_STACK |
 		IEEE80211_HW_SPECTRUM_MGMT;
 
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
+		 hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+
 	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
 		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f2afcbefc076..f318b3b1abe9 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -25,6 +25,7 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = {
 	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+	{ PCI_VDEVICE(ATHEROS, 0x002C) }, /* PCI-E 802.11n bonded out */
 	{ PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
 	{ 0 }
-- 
cgit v1.2.3


From 9ab86bbcf8be755256f0a5e994e0b38af6b4d399 Mon Sep 17 00:00:00 2001
From: Shirley Ma <mashirle@us.ibm.com>
Date: Fri, 29 Jan 2010 03:20:04 +0000
Subject: virtio_net: Defer skb allocation in receive path Date: Wed, 13 Jan
 2010 12:53:38 -0800

virtio_net receives packets from its pre-allocated vring buffers, then it
delivers these packets to upper layer protocols as skb buffs. So it's not
necessary to pre-allocate skb for each mergable buffer, then frees extra
skbs when buffers are merged into a large packet. This patch has deferred
skb allocation in receiving packets for both big packets and mergeable buffers
to reduce skb pre-allocations and skb frees. It frees unused buffers by calling
detach_unused_buf in vring, so recv skb queue is not needed.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/virtio_net.c | 427 +++++++++++++++++++++++++++--------------------
 1 file changed, 248 insertions(+), 179 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 6b92e383c653..9d8984a3741c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -56,8 +56,7 @@ struct virtnet_info
 	/* Host will merge rx buffers for big packets (shake it! shake it!) */
 	bool mergeable_rx_bufs;
 
-	/* Receive & send queues. */
-	struct sk_buff_head recv;
+	/* Send queue. */
 	struct sk_buff_head send;
 
 	/* Work struct for refilling if we run low on memory. */
@@ -75,34 +74,44 @@ struct skb_vnet_hdr {
 	unsigned int num_sg;
 };
 
+struct padded_vnet_hdr {
+	struct virtio_net_hdr hdr;
+	/*
+	 * virtio_net_hdr should be in a separated sg buffer because of a
+	 * QEMU bug, and data sg buffer shares same page with this header sg.
+	 * This padding makes next sg 16 byte aligned after virtio_net_hdr.
+	 */
+	char padding[6];
+};
+
 static inline struct skb_vnet_hdr *skb_vnet_hdr(struct sk_buff *skb)
 {
 	return (struct skb_vnet_hdr *)skb->cb;
 }
 
-static void give_a_page(struct virtnet_info *vi, struct page *page)
-{
-	page->private = (unsigned long)vi->pages;
-	vi->pages = page;
-}
-
-static void trim_pages(struct virtnet_info *vi, struct sk_buff *skb)
+/*
+ * private is used to chain pages for big packets, put the whole
+ * most recent used list in the beginning for reuse
+ */
+static void give_pages(struct virtnet_info *vi, struct page *page)
 {
-	unsigned int i;
+	struct page *end;
 
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
-		give_a_page(vi, skb_shinfo(skb)->frags[i].page);
-	skb_shinfo(skb)->nr_frags = 0;
-	skb->data_len = 0;
+	/* Find end of list, sew whole thing into vi->pages. */
+	for (end = page; end->private; end = (struct page *)end->private);
+	end->private = (unsigned long)vi->pages;
+	vi->pages = page;
 }
 
 static struct page *get_a_page(struct virtnet_info *vi, gfp_t gfp_mask)
 {
 	struct page *p = vi->pages;
 
-	if (p)
+	if (p) {
 		vi->pages = (struct page *)p->private;
-	else
+		/* clear private here, it is used to chain pages */
+		p->private = 0;
+	} else
 		p = alloc_page(gfp_mask);
 	return p;
 }
@@ -118,99 +127,142 @@ static void skb_xmit_done(struct virtqueue *svq)
 	netif_wake_queue(vi->dev);
 }
 
-static void receive_skb(struct net_device *dev, struct sk_buff *skb,
-			unsigned len)
+static void set_skb_frag(struct sk_buff *skb, struct page *page,
+			 unsigned int offset, unsigned int *len)
 {
-	struct virtnet_info *vi = netdev_priv(dev);
-	struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
-	int err;
-	int i;
-
-	if (unlikely(len < sizeof(struct virtio_net_hdr) + ETH_HLEN)) {
-		pr_debug("%s: short packet %i\n", dev->name, len);
-		dev->stats.rx_length_errors++;
-		goto drop;
-	}
+	int i = skb_shinfo(skb)->nr_frags;
+	skb_frag_t *f;
+
+	f = &skb_shinfo(skb)->frags[i];
+	f->size = min((unsigned)PAGE_SIZE - offset, *len);
+	f->page_offset = offset;
+	f->page = page;
+
+	skb->data_len += f->size;
+	skb->len += f->size;
+	skb_shinfo(skb)->nr_frags++;
+	*len -= f->size;
+}
 
-	if (vi->mergeable_rx_bufs) {
-		unsigned int copy;
-		char *p = page_address(skb_shinfo(skb)->frags[0].page);
+static struct sk_buff *page_to_skb(struct virtnet_info *vi,
+				   struct page *page, unsigned int len)
+{
+	struct sk_buff *skb;
+	struct skb_vnet_hdr *hdr;
+	unsigned int copy, hdr_len, offset;
+	char *p;
 
-		if (len > PAGE_SIZE)
-			len = PAGE_SIZE;
-		len -= sizeof(struct virtio_net_hdr_mrg_rxbuf);
+	p = page_address(page);
 
-		memcpy(&hdr->mhdr, p, sizeof(hdr->mhdr));
-		p += sizeof(hdr->mhdr);
+	/* copy small packet so we can reuse these pages for small data */
+	skb = netdev_alloc_skb_ip_align(vi->dev, GOOD_COPY_LEN);
+	if (unlikely(!skb))
+		return NULL;
 
-		copy = len;
-		if (copy > skb_tailroom(skb))
-			copy = skb_tailroom(skb);
+	hdr = skb_vnet_hdr(skb);
 
-		memcpy(skb_put(skb, copy), p, copy);
+	if (vi->mergeable_rx_bufs) {
+		hdr_len = sizeof hdr->mhdr;
+		offset = hdr_len;
+	} else {
+		hdr_len = sizeof hdr->hdr;
+		offset = sizeof(struct padded_vnet_hdr);
+	}
 
-		len -= copy;
+	memcpy(hdr, p, hdr_len);
 
-		if (!len) {
-			give_a_page(vi, skb_shinfo(skb)->frags[0].page);
-			skb_shinfo(skb)->nr_frags--;
-		} else {
-			skb_shinfo(skb)->frags[0].page_offset +=
-				sizeof(hdr->mhdr) + copy;
-			skb_shinfo(skb)->frags[0].size = len;
-			skb->data_len += len;
-			skb->len += len;
-		}
+	len -= hdr_len;
+	p += offset;
 
-		while (--hdr->mhdr.num_buffers) {
-			struct sk_buff *nskb;
+	copy = len;
+	if (copy > skb_tailroom(skb))
+		copy = skb_tailroom(skb);
+	memcpy(skb_put(skb, copy), p, copy);
 
-			i = skb_shinfo(skb)->nr_frags;
-			if (i >= MAX_SKB_FRAGS) {
-				pr_debug("%s: packet too long %d\n", dev->name,
-					 len);
-				dev->stats.rx_length_errors++;
-				goto drop;
-			}
+	len -= copy;
+	offset += copy;
 
-			nskb = vi->rvq->vq_ops->get_buf(vi->rvq, &len);
-			if (!nskb) {
-				pr_debug("%s: rx error: %d buffers missing\n",
-					 dev->name, hdr->mhdr.num_buffers);
-				dev->stats.rx_length_errors++;
-				goto drop;
-			}
+	while (len) {
+		set_skb_frag(skb, page, offset, &len);
+		page = (struct page *)page->private;
+		offset = 0;
+	}
 
-			__skb_unlink(nskb, &vi->recv);
-			vi->num--;
+	if (page)
+		give_pages(vi, page);
 
-			skb_shinfo(skb)->frags[i] = skb_shinfo(nskb)->frags[0];
-			skb_shinfo(nskb)->nr_frags = 0;
-			kfree_skb(nskb);
+	return skb;
+}
 
-			if (len > PAGE_SIZE)
-				len = PAGE_SIZE;
+static int receive_mergeable(struct virtnet_info *vi, struct sk_buff *skb)
+{
+	struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
+	struct page *page;
+	int num_buf, i, len;
+
+	num_buf = hdr->mhdr.num_buffers;
+	while (--num_buf) {
+		i = skb_shinfo(skb)->nr_frags;
+		if (i >= MAX_SKB_FRAGS) {
+			pr_debug("%s: packet too long\n", skb->dev->name);
+			skb->dev->stats.rx_length_errors++;
+			return -EINVAL;
+		}
 
-			skb_shinfo(skb)->frags[i].size = len;
-			skb_shinfo(skb)->nr_frags++;
-			skb->data_len += len;
-			skb->len += len;
+		page = vi->rvq->vq_ops->get_buf(vi->rvq, &len);
+		if (!page) {
+			pr_debug("%s: rx error: %d buffers missing\n",
+				 skb->dev->name, hdr->mhdr.num_buffers);
+			skb->dev->stats.rx_length_errors++;
+			return -EINVAL;
 		}
-	} else {
-		len -= sizeof(hdr->hdr);
+		if (len > PAGE_SIZE)
+			len = PAGE_SIZE;
+
+		set_skb_frag(skb, page, 0, &len);
+
+		--vi->num;
+	}
+	return 0;
+}
+
+static void receive_buf(struct net_device *dev, void *buf, unsigned int len)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct page *page;
+	struct skb_vnet_hdr *hdr;
 
-		if (len <= MAX_PACKET_LEN)
-			trim_pages(vi, skb);
+	if (unlikely(len < sizeof(struct virtio_net_hdr) + ETH_HLEN)) {
+		pr_debug("%s: short packet %i\n", dev->name, len);
+		dev->stats.rx_length_errors++;
+		if (vi->mergeable_rx_bufs || vi->big_packets)
+			give_pages(vi, buf);
+		else
+			dev_kfree_skb(buf);
+		return;
+	}
 
-		err = pskb_trim(skb, len);
-		if (err) {
-			pr_debug("%s: pskb_trim failed %i %d\n", dev->name,
-				 len, err);
+	if (!vi->mergeable_rx_bufs && !vi->big_packets) {
+		skb = buf;
+		len -= sizeof(struct virtio_net_hdr);
+		skb_trim(skb, len);
+	} else {
+		page = buf;
+		skb = page_to_skb(vi, page, len);
+		if (unlikely(!skb)) {
 			dev->stats.rx_dropped++;
-			goto drop;
+			give_pages(vi, page);
+			return;
 		}
+		if (vi->mergeable_rx_bufs)
+			if (receive_mergeable(vi, skb)) {
+				dev_kfree_skb(skb);
+				return;
+			}
 	}
 
+	hdr = skb_vnet_hdr(skb);
 	skb->truesize += skb->data_len;
 	dev->stats.rx_bytes += skb->len;
 	dev->stats.rx_packets++;
@@ -267,110 +319,119 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 
 frame_err:
 	dev->stats.rx_frame_errors++;
-drop:
 	dev_kfree_skb(skb);
 }
 
-static bool try_fill_recv_maxbufs(struct virtnet_info *vi, gfp_t gfp)
+static int add_recvbuf_small(struct virtnet_info *vi, gfp_t gfp)
 {
 	struct sk_buff *skb;
-	struct scatterlist sg[2+MAX_SKB_FRAGS];
-	int num, err, i;
-	bool oom = false;
-
-	sg_init_table(sg, 2+MAX_SKB_FRAGS);
-	do {
-		struct skb_vnet_hdr *hdr;
+	struct skb_vnet_hdr *hdr;
+	struct scatterlist sg[2];
+	int err;
 
-		skb = netdev_alloc_skb_ip_align(vi->dev, MAX_PACKET_LEN);
-		if (unlikely(!skb)) {
-			oom = true;
-			break;
-		}
+	skb = netdev_alloc_skb_ip_align(vi->dev, MAX_PACKET_LEN);
+	if (unlikely(!skb))
+		return -ENOMEM;
 
-		skb_put(skb, MAX_PACKET_LEN);
+	skb_put(skb, MAX_PACKET_LEN);
 
-		hdr = skb_vnet_hdr(skb);
-		sg_set_buf(sg, &hdr->hdr, sizeof(hdr->hdr));
+	hdr = skb_vnet_hdr(skb);
+	sg_set_buf(sg, &hdr->hdr, sizeof hdr->hdr);
 
-		if (vi->big_packets) {
-			for (i = 0; i < MAX_SKB_FRAGS; i++) {
-				skb_frag_t *f = &skb_shinfo(skb)->frags[i];
-				f->page = get_a_page(vi, gfp);
-				if (!f->page)
-					break;
+	skb_to_sgvec(skb, sg + 1, 0, skb->len);
 
-				f->page_offset = 0;
-				f->size = PAGE_SIZE;
+	err = vi->rvq->vq_ops->add_buf(vi->rvq, sg, 0, 2, skb);
+	if (err < 0)
+		dev_kfree_skb(skb);
 
-				skb->data_len += PAGE_SIZE;
-				skb->len += PAGE_SIZE;
+	return err;
+}
 
-				skb_shinfo(skb)->nr_frags++;
-			}
+static int add_recvbuf_big(struct virtnet_info *vi, gfp_t gfp)
+{
+	struct scatterlist sg[MAX_SKB_FRAGS + 2];
+	struct page *first, *list = NULL;
+	char *p;
+	int i, err, offset;
+
+	/* page in sg[MAX_SKB_FRAGS + 1] is list tail */
+	for (i = MAX_SKB_FRAGS + 1; i > 1; --i) {
+		first = get_a_page(vi, gfp);
+		if (!first) {
+			if (list)
+				give_pages(vi, list);
+			return -ENOMEM;
 		}
+		sg_set_buf(&sg[i], page_address(first), PAGE_SIZE);
 
-		num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
-		skb_queue_head(&vi->recv, skb);
+		/* chain new page in list head to match sg */
+		first->private = (unsigned long)list;
+		list = first;
+	}
 
-		err = vi->rvq->vq_ops->add_buf(vi->rvq, sg, 0, num, skb);
-		if (err < 0) {
-			skb_unlink(skb, &vi->recv);
-			trim_pages(vi, skb);
-			kfree_skb(skb);
-			break;
-		}
-		vi->num++;
-	} while (err >= num);
-	if (unlikely(vi->num > vi->max))
-		vi->max = vi->num;
-	vi->rvq->vq_ops->kick(vi->rvq);
-	return !oom;
+	first = get_a_page(vi, gfp);
+	if (!first) {
+		give_pages(vi, list);
+		return -ENOMEM;
+	}
+	p = page_address(first);
+
+	/* sg[0], sg[1] share the same page */
+	/* a separated sg[0] for  virtio_net_hdr only during to QEMU bug*/
+	sg_set_buf(&sg[0], p, sizeof(struct virtio_net_hdr));
+
+	/* sg[1] for data packet, from offset */
+	offset = sizeof(struct padded_vnet_hdr);
+	sg_set_buf(&sg[1], p + offset, PAGE_SIZE - offset);
+
+	/* chain first in list head */
+	first->private = (unsigned long)list;
+	err = vi->rvq->vq_ops->add_buf(vi->rvq, sg, 0, MAX_SKB_FRAGS + 2,
+				       first);
+	if (err < 0)
+		give_pages(vi, first);
+
+	return err;
 }
 
-/* Returns false if we couldn't fill entirely (OOM). */
-static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
+static int add_recvbuf_mergeable(struct virtnet_info *vi, gfp_t gfp)
 {
-	struct sk_buff *skb;
-	struct scatterlist sg[1];
+	struct page *page;
+	struct scatterlist sg;
 	int err;
-	bool oom = false;
-
-	if (!vi->mergeable_rx_bufs)
-		return try_fill_recv_maxbufs(vi, gfp);
 
-	do {
-		skb_frag_t *f;
+	page = get_a_page(vi, gfp);
+	if (!page)
+		return -ENOMEM;
 
-		skb = netdev_alloc_skb_ip_align(vi->dev, GOOD_COPY_LEN);
-		if (unlikely(!skb)) {
-			oom = true;
-			break;
-		}
+	sg_init_one(&sg, page_address(page), PAGE_SIZE);
 
-		f = &skb_shinfo(skb)->frags[0];
-		f->page = get_a_page(vi, gfp);
-		if (!f->page) {
-			oom = true;
-			kfree_skb(skb);
-			break;
-		}
+	err = vi->rvq->vq_ops->add_buf(vi->rvq, &sg, 0, 1, page);
+	if (err < 0)
+		give_pages(vi, page);
 
-		f->page_offset = 0;
-		f->size = PAGE_SIZE;
+	return err;
+}
 
-		skb_shinfo(skb)->nr_frags++;
+/* Returns false if we couldn't fill entirely (OOM). */
+static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
+{
+	int err;
+	bool oom = false;
 
-		sg_init_one(sg, page_address(f->page), PAGE_SIZE);
-		skb_queue_head(&vi->recv, skb);
+	do {
+		if (vi->mergeable_rx_bufs)
+			err = add_recvbuf_mergeable(vi, gfp);
+		else if (vi->big_packets)
+			err = add_recvbuf_big(vi, gfp);
+		else
+			err = add_recvbuf_small(vi, gfp);
 
-		err = vi->rvq->vq_ops->add_buf(vi->rvq, sg, 0, 1, skb);
 		if (err < 0) {
-			skb_unlink(skb, &vi->recv);
-			kfree_skb(skb);
+			oom = true;
 			break;
 		}
-		vi->num++;
+		++vi->num;
 	} while (err > 0);
 	if (unlikely(vi->num > vi->max))
 		vi->max = vi->num;
@@ -407,15 +468,14 @@ static void refill_work(struct work_struct *work)
 static int virtnet_poll(struct napi_struct *napi, int budget)
 {
 	struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi);
-	struct sk_buff *skb = NULL;
+	void *buf;
 	unsigned int len, received = 0;
 
 again:
 	while (received < budget &&
-	       (skb = vi->rvq->vq_ops->get_buf(vi->rvq, &len)) != NULL) {
-		__skb_unlink(skb, &vi->recv);
-		receive_skb(vi->dev, skb, len);
-		vi->num--;
+	       (buf = vi->rvq->vq_ops->get_buf(vi->rvq, &len)) != NULL) {
+		receive_buf(vi->dev, buf, len);
+		--vi->num;
 		received++;
 	}
 
@@ -495,9 +555,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 
 	/* Encode metadata header at front. */
 	if (vi->mergeable_rx_bufs)
-		sg_set_buf(sg, &hdr->mhdr, sizeof(hdr->mhdr));
+		sg_set_buf(sg, &hdr->mhdr, sizeof hdr->mhdr);
 	else
-		sg_set_buf(sg, &hdr->hdr, sizeof(hdr->hdr));
+		sg_set_buf(sg, &hdr->hdr, sizeof hdr->hdr);
 
 	hdr->num_sg = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 	return vi->svq->vq_ops->add_buf(vi->svq, sg, hdr->num_sg, 0, skb);
@@ -917,8 +977,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 			dev->features |= NETIF_F_HW_VLAN_FILTER;
 	}
 
-	/* Initialize our empty receive and send queues. */
-	skb_queue_head_init(&vi->recv);
+	/* Initialize our empty send queue. */
 	skb_queue_head_init(&vi->send);
 
 	err = register_netdev(dev);
@@ -953,25 +1012,35 @@ free:
 	return err;
 }
 
+static void free_unused_bufs(struct virtnet_info *vi)
+{
+	void *buf;
+	while (1) {
+		buf = vi->rvq->vq_ops->detach_unused_buf(vi->rvq);
+		if (!buf)
+			break;
+		if (vi->mergeable_rx_bufs || vi->big_packets)
+			give_pages(vi, buf);
+		else
+			dev_kfree_skb(buf);
+		--vi->num;
+	}
+	BUG_ON(vi->num != 0);
+}
+
 static void __devexit virtnet_remove(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
-	struct sk_buff *skb;
 
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
-	/* Free our skbs in send and recv queues, if any. */
-	while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
-		kfree_skb(skb);
-		vi->num--;
-	}
+	/* Free our skbs in send queue, if any. */
 	__skb_queue_purge(&vi->send);
 
-	BUG_ON(vi->num != 0);
-
 	unregister_netdev(vi->dev);
 	cancel_delayed_work_sync(&vi->refill);
+	free_unused_bufs(vi);
 
 	vdev->config->del_vqs(vi->vdev);
 
-- 
cgit v1.2.3


From 0c2dc318e88100e1abdff07e8a7d60460984a2d2 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Mon, 1 Feb 2010 00:19:07 +0000
Subject: sky2: Fix TX_MAP_PAGE misspelling

Btw of the dma-debug problem reported by Michael Breuer I spotted
a tiny misspelling in TX_MAP_PAGE definition introduced by commit
6b84dacadbdc3.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 365d79c7d834..54cb303443e0 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2156,7 +2156,7 @@ struct tx_ring_info {
 	struct sk_buff	*skb;
 	unsigned long flags;
 #define TX_MAP_SINGLE   0x0001
-#define TX_MAP_PAGE     000002
+#define TX_MAP_PAGE     0x0002
 	DECLARE_PCI_UNMAP_ADDR(mapaddr);
 	DECLARE_PCI_UNMAP_LEN(maplen);
 };
-- 
cgit v1.2.3


From 6a902881cc6993f136906559ca04b6a4c9e260fc Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 1 Feb 2010 05:24:54 +0000
Subject: qlcnic: use DEFINE_PCI_DEVICE_TABLE

Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into
correct section in every case.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 1698b6a68ed1..05275f2153be 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -102,7 +102,7 @@ static void qlcnic_config_indev_addr(struct net_device *dev, unsigned long);
 
 #define PCI_DEVICE_ID_QLOGIC_QLE824X  0x8020
 
-static const struct pci_device_id qlcnic_pci_tbl[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(qlcnic_pci_tbl) = {
 	ENTRY(PCI_DEVICE_ID_QLOGIC_QLE824X),
 	{0,}
 };
-- 
cgit v1.2.3


From 02420be6fc5fc63526aca43b5bfc571547a1c926 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 1 Feb 2010 05:24:55 +0000
Subject: qlcnic: add ethernet identifier in board info

Added missing identifier that distinguishes between
FCOE/ISCSI/ETHERNET functions.

Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index abec46846539..9662a37bfc57 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -1068,7 +1068,7 @@ int qlcnic_reset_context(struct qlcnic_adapter *);
  * QLOGIC Board information
  */
 
-#define QLCNIC_MAX_BOARD_NAME_LEN 64
+#define QLCNIC_MAX_BOARD_NAME_LEN 100
 struct qlcnic_brdinfo {
 	unsigned short  vendor;
 	unsigned short  device;
@@ -1078,8 +1078,12 @@ struct qlcnic_brdinfo {
 };
 
 static const struct qlcnic_brdinfo qlcnic_boards[] = {
-	{0x1077, 0x8020, 0x1077, 0x203, "8200 Series Single Port 10GbE CNA"},
-	{0x1077, 0x8020, 0x1077, 0x207, "8200 Series Dual Port 10GbE CNA"},
+	{0x1077, 0x8020, 0x1077, 0x203,
+		"8200 Series Single Port 10GbE Converged Network Adapter \
+		(TCP/IP Networking)"},
+	{0x1077, 0x8020, 0x1077, 0x207,
+		"8200 Series Dual Port 10GbE Converged Network Adapter \
+		(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x20b,
 		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x1077, 0x20c,
-- 
cgit v1.2.3


From 1b95a839587f40abab2f9cb3e5254dc821b9829b Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 1 Feb 2010 05:24:56 +0000
Subject: qlcnic: clear device reset state after fw recovery

o After firmware recovery, clear device reset state transition register.
  Otherwise firmware reload can occur unnecessary.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_main.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 05275f2153be..9a98285ee791 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -1866,6 +1866,23 @@ qlcnic_set_drv_state(struct qlcnic_adapter *adapter, int state)
 	qlcnic_api_unlock(adapter);
 }
 
+static int
+qlcnic_clr_drv_state(struct qlcnic_adapter *adapter)
+{
+	u32  val;
+
+	if (qlcnic_api_lock(adapter))
+		return -EBUSY;
+
+	val = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
+	val &= ~((u32)0x3 << (adapter->portnum * 4));
+	QLCWR32(adapter, QLCNIC_CRB_DRV_STATE, val);
+
+	qlcnic_api_unlock(adapter);
+
+	return 0;
+}
+
 static void
 qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter)
 {
@@ -2119,7 +2136,10 @@ qlcnic_attach_work(struct work_struct *work)
 done:
 	adapter->fw_fail_cnt = 0;
 	clear_bit(__QLCNIC_RESETTING, &adapter->state);
-	qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
+
+	if (!qlcnic_clr_drv_state(adapter))
+		qlcnic_schedule_work(adapter, qlcnic_fw_poll_work,
+							FW_POLL_DELAY);
 }
 
 static int
-- 
cgit v1.2.3


From ce6684433fb277406dd861fd8a17133253e7c367 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 1 Feb 2010 05:24:57 +0000
Subject: qlcnic: protect resoruce cleanup by rtnl lock

o context resources can be in used, while resoruce cleanup is in progress,
  during fw recover.
o Null pointer execption can occur in send_cmd_desc, if fw recovery
  module frees tx ring without rtnl lock.
o Same applies to ethtool register dump and FW health registers should be dump
  in any case.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_ethtool.c | 6 +++---
 drivers/net/qlcnic/qlcnic_main.c    | 2 ++
 2 files changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 65e9620e28f1..37df5f6cea08 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -326,12 +326,12 @@ qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 	regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
 	    (adapter->pdev)->device;
 
-	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
-		return;
-
 	for (i = 0; diag_registers[i] != -1; i++)
 		regs_buff[i] = QLCRD32(adapter, diag_registers[i]);
 
+	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+		return;
+
 	regs_buff[i++] = 0xFFEFCDAB; /* Marker btw regs and ring count*/
 
 	regs_buff[i++] = 1; /* No. of tx ring */
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 9a98285ee791..7259adc32631 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -2051,7 +2051,9 @@ qlcnic_detach_work(struct work_struct *work)
 
 	qlcnic_down(adapter, netdev);
 
+	rtnl_lock();
 	qlcnic_detach(adapter);
+	rtnl_unlock();
 
 	status = QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1);
 
-- 
cgit v1.2.3


From 897d3596e0dfc4c25963cff00f1159c79eaf38d3 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta@dut6195.unminc.com>
Date: Mon, 1 Feb 2010 05:24:58 +0000
Subject: qlcnic: support LED blink for device identification

Added support of device identification by blinking LED for specified time.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h         |  1 +
 drivers/net/qlcnic/qlcnic_ethtool.c | 26 ++++++++++++++++++++++++++
 drivers/net/qlcnic/qlcnic_hw.c      | 22 ++++++++++++++++++++++
 3 files changed, 49 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 9662a37bfc57..514e805f3ab3 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -1015,6 +1015,7 @@ void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int);
 
 int qlcnic_get_board_info(struct qlcnic_adapter *adapter);
 int qlcnic_wol_supported(struct qlcnic_adapter *adapter);
+int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate);
 
 /* Functions from qlcnic_init.c */
 int qlcnic_phantom_init(struct qlcnic_adapter *adapter);
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 37df5f6cea08..7212319760ba 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -618,6 +618,7 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 		     u64 *data)
 {
 	memset(data, 0, sizeof(u64) * QLCNIC_TEST_LEN);
+
 	data[0] = qlcnic_reg_test(dev);
 	if (data[0])
 		eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -693,6 +694,30 @@ static int qlcnic_set_tso(struct net_device *dev, u32 data)
 	return 0;
 }
 
+static int qlcnic_blink_led(struct net_device *dev, u32 val)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	int ret;
+
+	ret = qlcnic_config_led(adapter, 1, 0xf);
+	if (ret) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to set LED blink state.\n");
+		return ret;
+	}
+
+	msleep_interruptible(val * 1000);
+
+	ret = qlcnic_config_led(adapter, 0, 0xf);
+	if (ret) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to reset LED blink state.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static void
 qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
@@ -867,4 +892,5 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 	.set_coalesce = qlcnic_set_intr_coalesce,
 	.get_flags = ethtool_op_get_flags,
 	.set_flags = qlcnic_set_flags,
+	.phys_id = qlcnic_blink_led,
 };
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 91234e7b39e4..8724e561ed72 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1199,3 +1199,25 @@ qlcnic_wol_supported(struct qlcnic_adapter *adapter)
 
 	return 0;
 }
+
+int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
+{
+	struct qlcnic_nic_req   req;
+	int rv;
+	u64 word;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_CONFIG_LED | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	req.words[0] = cpu_to_le64((u64)rate << 32);
+	req.words[1] = cpu_to_le64(state);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv)
+		dev_err(&adapter->pdev->dev, "LED configuration failed.\n");
+
+	return rv;
+}
-- 
cgit v1.2.3


From 7eb9855d68faabe0004ed18c2af1f0974d3c2c63 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 1 Feb 2010 05:24:59 +0000
Subject: qlcnic: add interrupt diagnostic test

Interrupt test (offline) added in ethtool self test.
Register a temporary interrupt handler and then send command to fw
to raise an interrupt.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h         |  13 ++++-
 drivers/net/qlcnic/qlcnic_ctx.c     |   4 +-
 drivers/net/qlcnic/qlcnic_ethtool.c |  41 ++++++++++++-
 drivers/net/qlcnic/qlcnic_main.c    | 112 ++++++++++++++++++++++++++++++++----
 4 files changed, 154 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 514e805f3ab3..a5a67e9b5e10 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -560,6 +560,8 @@ struct qlcnic_recv_context {
 /*
  * Context state
  */
+#define QLCHAL_VERSION	1
+
 #define QLCNIC_HOST_CTX_STATE_ACTIVE	2
 
 /*
@@ -894,6 +896,8 @@ struct qlcnic_mac_req {
 #define __QLCNIC_RESETTING		2
 #define __QLCNIC_START_FW 		4
 
+#define QLCNIC_INTERRUPT_TEST		1
+
 struct qlcnic_adapter {
 	struct qlcnic_hardware_context ahw;
 
@@ -946,9 +950,10 @@ struct qlcnic_adapter {
 	u32 heartbit;
 
 	u8 dev_state;
+	u8 diag_test;
+	u8 diag_cnt;
 	u8 rsrd1;
-	u32 rsrd2;
-
+	u16 rsrd2;
 
 	u8 mac_addr[ETH_ALEN];
 
@@ -1064,6 +1069,10 @@ int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac);
 
 /* Functions from qlcnic_main.c */
 int qlcnic_reset_context(struct qlcnic_adapter *);
+u32 qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
+	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd);
+void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
+int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
 
 /*
  * QLOGIC Board information
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index 71c16a183458..0a6a39914aec 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -24,8 +24,6 @@
 
 #include "qlcnic.h"
 
-#define QLCHAL_VERSION	1
-
 static u32
 qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
 {
@@ -45,7 +43,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
 	return rsp;
 }
 
-static u32
+u32
 qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
 	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd)
 {
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 7212319760ba..58c50ed791de 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -65,7 +65,8 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 
 static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = {
 	"Register_Test_on_offline",
-	"Link_Test_on_offline"
+	"Link_Test_on_offline",
+	"Interrupt_Test_offline"
 };
 
 #define QLCNIC_TEST_LEN	ARRAY_SIZE(qlcnic_gstrings_test)
@@ -613,12 +614,50 @@ static int qlcnic_get_sset_count(struct net_device *dev, int sset)
 	}
 }
 
+static int qlcnic_irq_test(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int max_sds_rings = adapter->max_sds_rings;
+	int ret;
+
+	if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		return -EIO;
+
+	ret = qlcnic_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST);
+	if (ret)
+		goto clear_it;
+
+	adapter->diag_cnt = 0;
+	ret = qlcnic_issue_cmd(adapter, adapter->ahw.pci_func,
+			QLCHAL_VERSION, adapter->portnum, 0, 0, 0x00000011);
+	if (ret)
+		goto done;
+
+	msleep(10);
+
+	ret = !adapter->diag_cnt;
+
+done:
+	qlcnic_diag_free_res(netdev, max_sds_rings);
+
+clear_it:
+	adapter->max_sds_rings = max_sds_rings;
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	return ret;
+}
+
 static void
 qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 		     u64 *data)
 {
 	memset(data, 0, sizeof(u64) * QLCNIC_TEST_LEN);
 
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		data[2] = qlcnic_irq_test(dev);
+		if (data[2])
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+	}
+
 	data[0] = qlcnic_reg_test(dev);
 	if (data[0])
 		eth_test->flags |= ETH_TEST_FL_FAILED;
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 7259adc32631..a8b07120d362 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -88,6 +88,7 @@ static void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter);
 static void qlcnic_clr_all_drv_state(struct qlcnic_adapter *adapter);
 static int qlcnic_can_start_firmware(struct qlcnic_adapter *adapter);
 
+static irqreturn_t qlcnic_tmp_intr(int irq, void *data);
 static irqreturn_t qlcnic_intr(int irq, void *data);
 static irqreturn_t qlcnic_msi_intr(int irq, void *data);
 static irqreturn_t qlcnic_msix_intr(int irq, void *data);
@@ -720,13 +721,20 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
 
-	if (adapter->flags & QLCNIC_MSIX_ENABLED)
-		handler = qlcnic_msix_intr;
-	else if (adapter->flags & QLCNIC_MSI_ENABLED)
-		handler = qlcnic_msi_intr;
-	else {
-		flags |= IRQF_SHARED;
-		handler = qlcnic_intr;
+	if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
+		handler = qlcnic_tmp_intr;
+		if (!QLCNIC_IS_MSI_FAMILY(adapter))
+			flags |= IRQF_SHARED;
+
+	} else {
+		if (adapter->flags & QLCNIC_MSIX_ENABLED)
+			handler = qlcnic_msix_intr;
+		else if (adapter->flags & QLCNIC_MSI_ENABLED)
+			handler = qlcnic_msi_intr;
+		else {
+			flags |= IRQF_SHARED;
+			handler = qlcnic_intr;
+		}
 	}
 	adapter->irq = netdev->irq;
 
@@ -923,6 +931,60 @@ qlcnic_detach(struct qlcnic_adapter *adapter)
 	adapter->is_up = 0;
 }
 
+void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_host_sds_ring *sds_ring;
+	int ring;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &adapter->recv_ctx.sds_rings[ring];
+		qlcnic_disable_int(sds_ring);
+	}
+
+	qlcnic_detach(adapter);
+
+	adapter->diag_test = 0;
+	adapter->max_sds_rings = max_sds_rings;
+
+	if (qlcnic_attach(adapter))
+		return;
+
+	if (netif_running(netdev))
+		__qlcnic_up(adapter, netdev);
+
+	netif_device_attach(netdev);
+}
+
+int qlcnic_diag_alloc_res(struct net_device *netdev, int test)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_host_sds_ring *sds_ring;
+	int ring;
+	int ret;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev))
+		__qlcnic_down(adapter, netdev);
+
+	qlcnic_detach(adapter);
+
+	adapter->max_sds_rings = 1;
+	adapter->diag_test = test;
+
+	ret = qlcnic_attach(adapter);
+	if (ret)
+		return ret;
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &adapter->recv_ctx.sds_rings[ring];
+		qlcnic_enable_int(sds_ring);
+	}
+
+	return 0;
+}
+
 int
 qlcnic_reset_context(struct qlcnic_adapter *adapter)
 {
@@ -1689,10 +1751,8 @@ static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev)
 	return stats;
 }
 
-static irqreturn_t qlcnic_intr(int irq, void *data)
+static irqreturn_t qlcnic_clear_legacy_intr(struct qlcnic_adapter *adapter)
 {
-	struct qlcnic_host_sds_ring *sds_ring = data;
-	struct qlcnic_adapter *adapter = sds_ring->adapter;
 	u32 status;
 
 	status = readl(adapter->isr_int_vec);
@@ -1710,6 +1770,38 @@ static irqreturn_t qlcnic_intr(int irq, void *data)
 	readl(adapter->isr_int_vec);
 	readl(adapter->isr_int_vec);
 
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t qlcnic_tmp_intr(int irq, void *data)
+{
+	struct qlcnic_host_sds_ring *sds_ring = data;
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+
+	if (adapter->flags & QLCNIC_MSIX_ENABLED)
+		goto done;
+	else if (adapter->flags & QLCNIC_MSI_ENABLED) {
+		writel(0xffffffff, adapter->tgt_status_reg);
+		goto done;
+	}
+
+	if (qlcnic_clear_legacy_intr(adapter) == IRQ_NONE)
+		return IRQ_NONE;
+
+done:
+	adapter->diag_cnt++;
+	qlcnic_enable_int(sds_ring);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t qlcnic_intr(int irq, void *data)
+{
+	struct qlcnic_host_sds_ring *sds_ring = data;
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+
+	if (qlcnic_clear_legacy_intr(adapter) == IRQ_NONE)
+		return IRQ_NONE;
+
 	napi_schedule(&sds_ring->napi);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From cdaff1854f32ac9ddb4733530f617d32188665ed Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 1 Feb 2010 05:25:00 +0000
Subject: qlcnic: add loopback diagnostic test

Loopback test (offline) added in ethtool self test.
o Set device in loopback mode
o Send packets
o Process receive packets in qlcnic_process_rcv_ring_diag()
o Compare packets
o Reset device in normal mode.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h         |  6 +++
 drivers/net/qlcnic/qlcnic_ethtool.c | 82 ++++++++++++++++++++++++++++++++++++-
 drivers/net/qlcnic/qlcnic_hw.c      | 52 +++++++++++++++++++++++
 drivers/net/qlcnic/qlcnic_init.c    | 75 +++++++++++++++++++++++++++++++++
 drivers/net/qlcnic/qlcnic_main.c    | 20 +++++----
 5 files changed, 225 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index a5a67e9b5e10..b40a851ec7d1 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -897,6 +897,7 @@ struct qlcnic_mac_req {
 #define __QLCNIC_START_FW 		4
 
 #define QLCNIC_INTERRUPT_TEST		1
+#define QLCNIC_LOOPBACK_TEST		2
 
 struct qlcnic_adapter {
 	struct qlcnic_hardware_context ahw;
@@ -1066,6 +1067,8 @@ int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
 void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
 		struct qlcnic_host_tx_ring *tx_ring);
 int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac);
+void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter);
+int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter);
 
 /* Functions from qlcnic_main.c */
 int qlcnic_reset_context(struct qlcnic_adapter *);
@@ -1073,6 +1076,9 @@ u32 qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
 	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd);
 void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
 int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
+int qlcnic_check_loopback_buff(unsigned char *data);
+netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring);
 
 /*
  * QLOGIC Board information
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 58c50ed791de..8da6ec8c13b9 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -66,7 +66,8 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = {
 	"Register_Test_on_offline",
 	"Link_Test_on_offline",
-	"Interrupt_Test_offline"
+	"Interrupt_Test_offline",
+	"Loopback_Test_offline"
 };
 
 #define QLCNIC_TEST_LEN	ARRAY_SIZE(qlcnic_gstrings_test)
@@ -614,6 +615,80 @@ static int qlcnic_get_sset_count(struct net_device *dev, int sset)
 	}
 }
 
+#define QLC_ILB_PKT_SIZE 64
+
+static void qlcnic_create_loopback_buff(unsigned char *data)
+{
+	unsigned char random_data[] = {0xa8, 0x06, 0x45, 0x00};
+	memset(data, 0x4e, QLC_ILB_PKT_SIZE);
+	memset(data, 0xff, 12);
+	memcpy(data + 12, random_data, sizeof(random_data));
+}
+
+int qlcnic_check_loopback_buff(unsigned char *data)
+{
+	unsigned char buff[QLC_ILB_PKT_SIZE];
+	qlcnic_create_loopback_buff(buff);
+	return memcmp(data, buff, QLC_ILB_PKT_SIZE);
+}
+
+static int qlcnic_do_ilb_test(struct qlcnic_adapter *adapter)
+{
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_host_sds_ring *sds_ring = &recv_ctx->sds_rings[0];
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		skb = dev_alloc_skb(QLC_ILB_PKT_SIZE);
+		qlcnic_create_loopback_buff(skb->data);
+		skb_put(skb, QLC_ILB_PKT_SIZE);
+
+		adapter->diag_cnt = 0;
+
+		qlcnic_xmit_frame(skb, adapter->netdev);
+
+		msleep(5);
+
+		qlcnic_process_rcv_ring_diag(sds_ring);
+
+		dev_kfree_skb_any(skb);
+		if (!adapter->diag_cnt)
+			return -1;
+	}
+	return 0;
+}
+
+static int qlcnic_loopback_test(struct net_device *netdev)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	int max_sds_rings = adapter->max_sds_rings;
+	int ret;
+
+	if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		return -EIO;
+
+	ret = qlcnic_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST);
+	if (ret)
+		goto clear_it;
+
+	ret = qlcnic_set_ilb_mode(adapter);
+	if (ret)
+		goto done;
+
+	ret = qlcnic_do_ilb_test(adapter);
+
+	qlcnic_clear_ilb_mode(adapter);
+
+done:
+	qlcnic_diag_free_res(netdev, max_sds_rings);
+
+clear_it:
+	adapter->max_sds_rings = max_sds_rings;
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	return ret;
+}
+
 static int qlcnic_irq_test(struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
@@ -656,6 +731,11 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 		data[2] = qlcnic_irq_test(dev);
 		if (data[2])
 			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		data[3] = qlcnic_loopback_test(dev);
+		if (data[3])
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
 	}
 
 	data[0] = qlcnic_reg_test(dev);
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 8724e561ed72..dc6cd69d6d93 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1221,3 +1221,55 @@ int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
 
 	return rv;
 }
+
+static int qlcnic_set_fw_loopback(struct qlcnic_adapter *adapter, u32 flag)
+{
+	struct qlcnic_nic_req	req;
+	int			rv;
+	u64			word;
+
+	memset(&req, 0, sizeof(struct qlcnic_nic_req));
+	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
+
+	word = QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK |
+			((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+	req.words[0] = cpu_to_le64(flag);
+
+	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv)
+		dev_err(&adapter->pdev->dev,
+			"%sting loopback mode failed.\n",
+					flag ? "Set" : "Reset");
+	return rv;
+}
+
+int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter)
+{
+	if (qlcnic_set_fw_loopback(adapter, 1))
+		return -EIO;
+
+	if (qlcnic_nic_set_promisc(adapter,
+				VPORT_MISS_MODE_ACCEPT_ALL)) {
+		qlcnic_set_fw_loopback(adapter, 0);
+		return -EIO;
+	}
+
+	msleep(1000);
+	return 0;
+}
+
+void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter)
+{
+	int mode = VPORT_MISS_MODE_DROP;
+	struct net_device *netdev = adapter->netdev;
+
+	qlcnic_set_fw_loopback(adapter, 0);
+
+	if (netdev->flags & IFF_PROMISC)
+		mode = VPORT_MISS_MODE_ACCEPT_ALL;
+	else if (netdev->flags & IFF_ALLMULTI)
+		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
+
+	qlcnic_nic_set_promisc(adapter, mode);
+}
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index 7ae8bcc1e439..ea00ab4d4feb 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -1464,3 +1464,78 @@ qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter,
 	spin_unlock(&rds_ring->lock);
 }
 
+static struct qlcnic_rx_buffer *
+qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter,
+		struct qlcnic_host_sds_ring *sds_ring,
+		int ring, u64 sts_data0)
+{
+	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_rx_buffer *buffer;
+	struct sk_buff *skb;
+	struct qlcnic_host_rds_ring *rds_ring;
+	int index, length, cksum, pkt_offset;
+
+	if (unlikely(ring >= adapter->max_rds_rings))
+		return NULL;
+
+	rds_ring = &recv_ctx->rds_rings[ring];
+
+	index = qlcnic_get_sts_refhandle(sts_data0);
+	if (unlikely(index >= rds_ring->num_desc))
+		return NULL;
+
+	buffer = &rds_ring->rx_buf_arr[index];
+
+	length = qlcnic_get_sts_totallength(sts_data0);
+	cksum  = qlcnic_get_sts_status(sts_data0);
+	pkt_offset = qlcnic_get_sts_pkt_offset(sts_data0);
+
+	skb = qlcnic_process_rxbuf(adapter, rds_ring, index, cksum);
+	if (!skb)
+		return buffer;
+
+	skb_put(skb, rds_ring->skb_size);
+
+	if (pkt_offset)
+		skb_pull(skb, pkt_offset);
+
+	skb->truesize = skb->len + sizeof(struct sk_buff);
+
+	if (!qlcnic_check_loopback_buff(skb->data))
+		adapter->diag_cnt++;
+
+	dev_kfree_skb_any(skb);
+
+	return buffer;
+}
+
+void
+qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring)
+{
+	struct qlcnic_adapter *adapter = sds_ring->adapter;
+	struct status_desc *desc;
+	struct qlcnic_rx_buffer *rxbuf;
+	u64 sts_data0;
+
+	int opcode, ring, desc_cnt;
+	u32 consumer = sds_ring->consumer;
+
+	desc = &sds_ring->desc_head[consumer];
+	sts_data0 = le64_to_cpu(desc->status_desc_data[0]);
+
+	if (!(sts_data0 & STATUS_OWNER_HOST))
+		return;
+
+	desc_cnt = qlcnic_get_sts_desc_cnt(sts_data0);
+	opcode = qlcnic_get_sts_opcode(sts_data0);
+
+	ring = qlcnic_get_sts_type(sts_data0);
+	rxbuf = qlcnic_process_rcv_diag(adapter, sds_ring,
+					ring, sts_data0);
+
+	desc->status_desc_data[0] = cpu_to_le64(STATUS_OWNER_PHANTOM);
+	consumer = get_next_index(consumer, sds_ring->num_desc);
+
+	sds_ring->consumer = consumer;
+	writel(consumer, sds_ring->crb_sts_consumer);
+}
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index a8b07120d362..665e8e56b6a8 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -65,8 +65,6 @@ static int __devinit qlcnic_probe(struct pci_dev *pdev,
 static void __devexit qlcnic_remove(struct pci_dev *pdev);
 static int qlcnic_open(struct net_device *netdev);
 static int qlcnic_close(struct net_device *netdev);
-static netdev_tx_t qlcnic_xmit_frame(struct sk_buff *,
-					       struct net_device *);
 static void qlcnic_tx_timeout(struct net_device *netdev);
 static void qlcnic_tx_timeout_task(struct work_struct *work);
 static void qlcnic_attach_work(struct work_struct *work);
@@ -937,9 +935,11 @@ void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings)
 	struct qlcnic_host_sds_ring *sds_ring;
 	int ring;
 
-	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
-		sds_ring = &adapter->recv_ctx.sds_rings[ring];
-		qlcnic_disable_int(sds_ring);
+	if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
+		for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+			sds_ring = &adapter->recv_ctx.sds_rings[ring];
+			qlcnic_disable_int(sds_ring);
+		}
 	}
 
 	qlcnic_detach(adapter);
@@ -977,9 +977,11 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test)
 	if (ret)
 		return ret;
 
-	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
-		sds_ring = &adapter->recv_ctx.sds_rings[ring];
-		qlcnic_enable_int(sds_ring);
+	if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
+		for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+			sds_ring = &adapter->recv_ctx.sds_rings[ring];
+			qlcnic_enable_int(sds_ring);
+		}
 	}
 
 	return 0;
@@ -1549,7 +1551,7 @@ qlcnic_clear_cmddesc(u64 *desc)
 	desc[2] = 0ULL;
 }
 
-static netdev_tx_t
+netdev_tx_t
 qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
-- 
cgit v1.2.3


From b6c3f5be7c6ac3375f44de4545c1ffe216b34022 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 2 Feb 2010 10:08:19 -0600
Subject: b43: Fix throughput regression

Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement
short slot and basic rate handling" reduced the transmit throughput for
my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling
portion is OK, the problem is in the short slot handling.

Prior to this change, the short slot enable/disable routines were never
called. Experimentation showed that the critical part was changing the
value at offset 0x0010 in the shared memory. This is supposed to contain
the 802.11 Slot Time in usec, but if it is changed from its initial value
of zero, performance is destroyed. On the other hand, changing the value
in the MMIO register corresponding to the Interframe Slot Time increased
performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic
improvement of the transmit rate from 5.3 to 19.0 Mb/s.

Other changes in the patch include removal of the magic number for the
MMIO register, and allowing the slot time to be set for any PHY operating
in the 2.4 GHz band. Previously, the routine was executed only for G PHYs.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/b43.h  |  1 +
 drivers/net/wireless/b43/main.c | 13 ++++++++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf9491997..c484cc253892 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -115,6 +115,7 @@
 #define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */
 #define B43_MMIO_TSF_3			0x638	/* core rev < 3 only */
 #define B43_MMIO_RNG			0x65A
+#define B43_MMIO_IFSSLOT		0x684	/* Interframe slot time */
 #define B43_MMIO_IFSCTL			0x688 /* Interframe space control */
 #define  B43_MMIO_IFSCTL_USE_EDCF	0x0004
 #define B43_MMIO_POWERUP_DELAY		0x6A8
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 19b4eae47b59..fcbf0e27d9f3 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev)
 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 {
 	/* slot_time is in usec. */
-	if (dev->phy.type != B43_PHYTYPE_G)
+	/* This test used to exit for all but a G PHY. */
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 		return;
-	b43_write16(dev, 0x684, 510 + slot_time);
-	b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
+	/* Shared memory location 0x0010 is the slot time and should be
+	 * set to slot_time; however, this register is initially 0 and changing
+	 * the value adversely affects the transmit rate for BCM4311
+	 * devices. Until this behavior is unterstood, delete this step
+	 *
+	 * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	 */
 }
 
 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
-- 
cgit v1.2.3


From 76802851b6e1b78b614ba611d6b5d27a83f60ded Mon Sep 17 00:00:00 2001
From: Andreas Mohr <andi@lisas.de>
Date: Sun, 31 Jan 2010 02:58:19 +0000
Subject: MCS7830 USB-Ether: add Rx error support

ChangeLog:
- evaluate Rx error statistics from trailing Rx status byte
- add driver TODO list
- add myself to authors

Quilt series run-tested, based on 2.6.33-rc4 (net-2.6.git mcs7830 has idle history,
should be good to go).

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/mcs7830.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 87374317f480..22cccda33366 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -3,11 +3,27 @@
  *
  * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
  *
+ * Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
  * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
  * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
  * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
  * Copyright (c) 2002-2003 TiVo Inc.
  *
+ * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
+ *
+ * TODO:
+ * - add .reset_resume support (iface is _gone_ after resume w/ power loss)
+ * - verify that mcs7830_get_regs() does have same output pre-/post-suspend
+ * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
+ * - implement ethtool_ops get_pauseparam/set_pauseparam
+ *   via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
+ * - implement get_eeprom/[set_eeprom]
+ * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
+ * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
+ *   can access only ~ 24, remaining user buffer is uninitialized garbage
+ * - anything else?
+ *
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -83,6 +99,17 @@ enum {
 	   HIF_REG_PAUSE_THRESHOLD_DEFAULT	= 0,
 };
 
+/* Trailing status byte in Ethernet Rx frame */
+enum {
+	MCS7830_RX_SHORT_FRAME		= 0x01, /* < 64 bytes */
+	MCS7830_RX_LENGTH_ERROR		= 0x02, /* framelen != Ethernet length field */
+	MCS7830_RX_ALIGNMENT_ERROR	= 0x04, /* non-even number of nibbles */
+	MCS7830_RX_CRC_ERROR		= 0x08,
+	MCS7830_RX_LARGE_FRAME		= 0x10, /* > 1518 bytes */
+	MCS7830_RX_FRAME_CORRECT	= 0x20, /* frame is correct */
+	/* [7:6] reserved */
+};
+
 struct mcs7830_data {
 	u8 multi_filter[8];
 	u8 config;
@@ -539,9 +566,23 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	skb_trim(skb, skb->len - 1);
 	status = skb->data[skb->len];
 
-	if (status != 0x20)
+	if (status != MCS7830_RX_FRAME_CORRECT) {
 		dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
 
+		/* hmm, perhaps usbnet.c already sees a globally visible
+		   frame error and increments rx_errors on its own already? */
+		dev->net->stats.rx_errors++;
+
+		if (status &	(MCS7830_RX_SHORT_FRAME
+				|MCS7830_RX_LENGTH_ERROR
+				|MCS7830_RX_LARGE_FRAME))
+			dev->net->stats.rx_length_errors++;
+		if (status & MCS7830_RX_ALIGNMENT_ERROR)
+			dev->net->stats.rx_frame_errors++;
+		if (status & MCS7830_RX_CRC_ERROR)
+			dev->net->stats.rx_crc_errors++;
+	}
+
 	return skb->len > 0;
 }
 
-- 
cgit v1.2.3


From 00e499131e250324a89c93d5dd88c8f2b4bf6dbb Mon Sep 17 00:00:00 2001
From: Andreas Mohr <andi@lisas.de>
Date: Sun, 31 Jan 2010 02:58:26 +0000
Subject: MCS7830 USB-Ether: Spelling corrections

ChangeLog:
- spelling corrections / whitespace

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/mcs7830.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 22cccda33366..cb164d6c9b51 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -1,5 +1,5 @@
 /*
- * MosChips MCS7830 based USB 2.0 Ethernet Devices
+ * MOSCHIP MCS7830 based USB 2.0 Ethernet Devices
  *
  * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
  *
@@ -71,7 +71,7 @@
 				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
 				 ADVERTISE_10HALF | ADVERTISE_CSMA)
 
-/* HIF_REG_XX coressponding index value */
+/* HIF_REG_XX corresponding index value */
 enum {
 	HIF_REG_MULTICAST_HASH			= 0x00,
 	HIF_REG_PACKET_GAP1			= 0x08,
@@ -92,7 +92,7 @@ enum {
 	   HIF_REG_CONFIG_TXENABLE		= 0x08,
 	   HIF_REG_CONFIG_SLEEPMODE		= 0x04,
 	   HIF_REG_CONFIG_ALLMULTICAST		= 0x02,
-	   HIF_REG_CONFIG_PROMISCIOUS		= 0x01,
+	   HIF_REG_CONFIG_PROMISCUOUS		= 0x01,
 	HIF_REG_ETHERNET_ADDR			= 0x0f,
 	HIF_REG_22				= 0x15,
 	HIF_REG_PAUSE_THRESHOLD			= 0x16,
@@ -417,7 +417,7 @@ static void mcs7830_set_multicast(struct net_device *net)
 	data->config |= HIF_REG_CONFIG_ALLMULTICAST;
 
 	if (net->flags & IFF_PROMISC) {
-		data->config |= HIF_REG_CONFIG_PROMISCIOUS;
+		data->config |= HIF_REG_CONFIG_PROMISCUOUS;
 	} else if (net->flags & IFF_ALLMULTI ||
 		   net->mc_count > MCS7830_MAX_MCAST) {
 		data->config |= HIF_REG_CONFIG_ALLMULTICAST;
@@ -522,7 +522,7 @@ static const struct net_device_ops mcs7830_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= mcs7830_ioctl,
 	.ndo_set_multicast_list = mcs7830_set_multicast,
-	.ndo_set_mac_address	 = mcs7830_set_mac_address,
+	.ndo_set_mac_address	= mcs7830_set_mac_address,
 };
 
 static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
@@ -553,7 +553,7 @@ out:
 	return ret;
 }
 
-/* The chip always appends a status bytes that we need to strip */
+/* The chip always appends a status byte that we need to strip */
 static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 {
 	u8 status;
-- 
cgit v1.2.3


From c774651a5ffc0250f82d72730753f196c86884c5 Mon Sep 17 00:00:00 2001
From: Andreas Mohr <andi@lisas.de>
Date: Sun, 31 Jan 2010 02:58:33 +0000
Subject: MCS7830 USB-Ether: change register define

ChangeLog:
- rename register, add comment

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/mcs7830.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index cb164d6c9b51..36a029218e3d 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -85,6 +85,7 @@ enum {
 	   HIF_REG_PHY_CMD2_PEND_FLAG_BIT	= 0x80,
 	   HIF_REG_PHY_CMD2_READY_FLAG_BIT	= 0x40,
 	HIF_REG_CONFIG				= 0x0e,
+	/* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
 	   HIF_REG_CONFIG_CFG			= 0x80,
 	   HIF_REG_CONFIG_SPEED100		= 0x40,
 	   HIF_REG_CONFIG_FULLDUPLEX_ENABLE	= 0x20,
@@ -94,7 +95,7 @@ enum {
 	   HIF_REG_CONFIG_ALLMULTICAST		= 0x02,
 	   HIF_REG_CONFIG_PROMISCUOUS		= 0x01,
 	HIF_REG_ETHERNET_ADDR			= 0x0f,
-	HIF_REG_22				= 0x15,
+	HIF_REG_FRAME_DROP_COUNTER		= 0x15, /* 0..ff; reset: 0 */
 	HIF_REG_PAUSE_THRESHOLD			= 0x16,
 	   HIF_REG_PAUSE_THRESHOLD_DEFAULT	= 0,
 };
@@ -334,7 +335,7 @@ static int mcs7830_get_rev(struct usbnet *dev)
 {
 	u8 dummy[2];
 	int ret;
-	ret = mcs7830_get_reg(dev, HIF_REG_22, 2, dummy);
+	ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
 	if (ret > 0)
 		return 2; /* Rev C or later */
 	return 1; /* earlier revision */
-- 
cgit v1.2.3


From ace2a4d0fbf868c00625a8fd91c44ad9fabe7012 Mon Sep 17 00:00:00 2001
From: Andreas Mohr <andi@lisas.de>
Date: Sun, 31 Jan 2010 02:58:42 +0000
Subject: MCS7830 USB-Ether: resume _with_ working link, via .reset_resume
 support

ChangeLog:
Implement .reset_resume support to retain a live network connection
during suspend despite USB power loss.
- rework operation to reference cached data in mcs7830_data and
  netdev->dev_addr
- update netdev->dev_addr only in case new MAC was set successfully
. Tests done:
  . ethtool -d pre-/post-suspend: register values match
  . running ssh session suspend, resume: works
  . ifdown device, suspend, resume: works
  . ifup, suspend, unplug, resume: WORKS (eth1 is removed, re-ifup of eth1
    after card replug works)
  . verified identical MAC in ifconfig post-resume
    (ok, should be verified on network side to be fully certain...)

Keywords: suspend resume network connection dead interface down

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/mcs7830.c | 190 ++++++++++++++++++++++++++++++----------------
 1 file changed, 123 insertions(+), 67 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 36a029218e3d..6fc098fe9ff7 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -12,8 +12,6 @@
  * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
  *
  * TODO:
- * - add .reset_resume support (iface is _gone_ after resume w/ power loss)
- * - verify that mcs7830_get_regs() does have same output pre-/post-suspend
  * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
  * - implement ethtool_ops get_pauseparam/set_pauseparam
  *   via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
@@ -137,7 +135,7 @@ static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
 	return ret;
 }
 
-static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data)
+static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
@@ -211,13 +209,43 @@ out:
 	usb_free_urb(urb);
 }
 
-static int mcs7830_get_address(struct usbnet *dev)
+static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
+{
+	int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int mcs7830_hif_set_mac_address(struct usbnet *dev, unsigned char *addr)
+{
+	int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
+
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
 {
 	int ret;
-	ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
-				   dev->net->dev_addr);
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
+
 	if (ret < 0)
 		return ret;
+
+	/* it worked --> adopt it on netdev side */
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
 	return 0;
 }
 
@@ -359,33 +387,6 @@ static void mcs7830_rev_C_fixup(struct usbnet *dev)
 	}
 }
 
-static int mcs7830_init_dev(struct usbnet *dev)
-{
-	int ret;
-	int retry;
-
-	/* Read MAC address from EEPROM */
-	ret = -EINVAL;
-	for (retry = 0; retry < 5 && ret; retry++)
-		ret = mcs7830_get_address(dev);
-	if (ret) {
-		dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
-		goto out;
-	}
-
-	/* Set up PHY */
-	ret = mcs7830_set_autoneg(dev, 0);
-	if (ret) {
-		dev_info(&dev->udev->dev, "Cannot set autoneg\n");
-		goto out;
-	}
-
-	mcs7830_rev_C_fixup(dev);
-	ret = 0;
-out:
-	return ret;
-}
-
 static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
 			     int location)
 {
@@ -406,11 +407,33 @@ static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
-/* credits go to asix_set_multicast */
-static void mcs7830_set_multicast(struct net_device *net)
+static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
+{
+	return (struct mcs7830_data *)&dev->data;
+}
+
+static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
+{
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+	mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
+				sizeof data->multi_filter,
+				data->multi_filter);
+}
+
+static void mcs7830_hif_update_config(struct usbnet *dev)
+{
+	/* implementation specific to data->config
+           (argument needs to be heap-based anyway - USB DMA!) */
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+	mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
+}
+
+static void mcs7830_data_set_multicast(struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
-	struct mcs7830_data *data = (struct mcs7830_data *)&dev->data;
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+
+	memset(data->multi_filter, 0, sizeof data->multi_filter);
 
 	data->config = HIF_REG_CONFIG_TXENABLE;
 
@@ -433,21 +456,51 @@ static void mcs7830_set_multicast(struct net_device *net)
 		u32 crc_bits;
 		int i;
 
-		memset(data->multi_filter, 0, sizeof data->multi_filter);
-
 		/* Build the multicast hash filter. */
 		for (i = 0; i < net->mc_count; i++) {
 			crc_bits = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
 			data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
 			mc_list = mc_list->next;
 		}
+	}
+}
 
-		mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
-				sizeof data->multi_filter,
-				data->multi_filter);
+static int mcs7830_apply_base_config(struct usbnet *dev)
+{
+	int ret;
+
+	/* re-configure known MAC (suspend case etc.) */
+	ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
+	if (ret) {
+		dev_info(&dev->udev->dev, "Cannot set MAC address\n");
+		goto out;
 	}
 
-	mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
+	/* Set up PHY */
+	ret = mcs7830_set_autoneg(dev, 0);
+	if (ret) {
+		dev_info(&dev->udev->dev, "Cannot set autoneg\n");
+		goto out;
+	}
+
+	mcs7830_hif_update_multicast_hash(dev);
+	mcs7830_hif_update_config(dev);
+
+	mcs7830_rev_C_fixup(dev);
+	ret = 0;
+out:
+	return ret;
+}
+
+/* credits go to asix_set_multicast */
+static void mcs7830_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	mcs7830_data_set_multicast(net);
+
+	mcs7830_hif_update_multicast_hash(dev);
+	mcs7830_hif_update_config(dev);
 }
 
 static int mcs7830_get_regs_len(struct net_device *net)
@@ -491,29 +544,6 @@ static const struct ethtool_ops mcs7830_ethtool_ops = {
 	.nway_reset		= usbnet_nway_reset,
 };
 
-static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
-{
-	int ret;
-	struct usbnet *dev = netdev_priv(netdev);
-	struct sockaddr *addr = p;
-
-	if (netif_running(netdev))
-		return -EBUSY;
-
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EINVAL;
-
-	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-
-	ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
-			netdev->dev_addr);
-
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 static const struct net_device_ops mcs7830_netdev_ops = {
 	.ndo_open		= usbnet_open,
 	.ndo_stop		= usbnet_stop,
@@ -530,14 +560,25 @@ static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 {
 	struct net_device *net = dev->net;
 	int ret;
+	int retry;
 
-	ret = mcs7830_init_dev(dev);
+	/* Initial startup: Gather MAC address setting from EEPROM */
+	ret = -EINVAL;
+	for (retry = 0; retry < 5 && ret; retry++)
+		ret = mcs7830_hif_get_mac_address(dev, net->dev_addr);
+	if (ret) {
+		dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
+		goto out;
+	}
+
+	mcs7830_data_set_multicast(net);
+
+	ret = mcs7830_apply_base_config(dev);
 	if (ret)
 		goto out;
 
 	net->ethtool_ops = &mcs7830_ethtool_ops;
 	net->netdev_ops = &mcs7830_netdev_ops;
-	mcs7830_set_multicast(net);
 
 	/* reserve space for the status byte on rx */
 	dev->rx_urb_size = ETH_FRAME_LEN + 1;
@@ -622,6 +663,20 @@ static const struct usb_device_id products[] = {
 };
 MODULE_DEVICE_TABLE(usb, products);
 
+static int mcs7830_reset_resume (struct usb_interface *intf)
+{
+ 	/* YES, this function is successful enough that ethtool -d
+           does show same output pre-/post-suspend */
+
+	struct usbnet		*dev = usb_get_intfdata(intf);
+
+	mcs7830_apply_base_config(dev);
+
+	usbnet_resume(intf);
+
+	return 0;
+}
+
 static struct usb_driver mcs7830_driver = {
 	.name = driver_name,
 	.id_table = products,
@@ -629,6 +684,7 @@ static struct usb_driver mcs7830_driver = {
 	.disconnect = usbnet_disconnect,
 	.suspend = usbnet_suspend,
 	.resume = usbnet_resume,
+	.reset_resume = mcs7830_reset_resume,
 };
 
 static int __init mcs7830_init(void)
-- 
cgit v1.2.3


From f6815077e75c5b7f55b56fc3788e328514d4e72a Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Mon, 1 Feb 2010 13:41:47 +0000
Subject: sky2: fix transmit DMA map leakage

The book keeping structure for transmit always had the flags value
cleared so transmit DMA maps were never released correctly.
Based on patch by Jarek Poplawski, problem observed by Michael Breuer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index d760650c5c04..67249c3c9f50 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1025,11 +1025,8 @@ static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
 {
 	struct sky2_tx_le *le = sky2->tx_le + *slot;
-	struct tx_ring_info *re = sky2->tx_ring + *slot;
 
 	*slot = RING_NEXT(*slot, sky2->tx_ring_size);
-	re->flags = 0;
-	re->skb = NULL;
 	le->ctrl = 0;
 	return le;
 }
@@ -1622,8 +1619,7 @@ static unsigned tx_le_req(const struct sk_buff *skb)
 	return count;
 }
 
-static void sky2_tx_unmap(struct pci_dev *pdev,
-			  const struct tx_ring_info *re)
+static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
 {
 	if (re->flags & TX_MAP_SINGLE)
 		pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1633,6 +1629,7 @@ static void sky2_tx_unmap(struct pci_dev *pdev,
 		pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
 			       pci_unmap_len(re, maplen),
 			       PCI_DMA_TODEVICE);
+	re->flags = 0;
 }
 
 /*
@@ -1839,6 +1836,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 			dev->stats.tx_packets++;
 			dev->stats.tx_bytes += skb->len;
 
+			re->skb = NULL;
 			dev_kfree_skb_any(skb);
 
 			sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
-- 
cgit v1.2.3


From 2e02644abc4b3574533b027782820b5a6dfe1920 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 1 Feb 2010 10:29:29 +0000
Subject: cxgb3: add memory barriers

Add memory barriers to fix crashes observed on newest PowerPC platforms.
The HW and driver state of the receive rings were getting out of sync.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/sge.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index bdbd14727e4b..4cf9b7962afa 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -480,6 +480,7 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
 {
 	if (q->pend_cred >= q->credits / 4) {
 		q->pend_cred = 0;
+		wmb();
 		t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
 	}
 }
@@ -2282,11 +2283,14 @@ static int process_responses(struct adapter *adap, struct sge_qset *qs,
 	while (likely(budget_left && is_new_response(r, q))) {
 		int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
 		struct sk_buff *skb = NULL;
-		u32 len, flags = ntohl(r->flags);
-		__be32 rss_hi = *(const __be32 *)r,
-		       rss_lo = r->rss_hdr.rss_hash_val;
+		u32 len, flags;
+		__be32 rss_hi, rss_lo;
 
+		rmb();
 		eth = r->rss_hdr.opcode == CPL_RX_PKT;
+		rss_hi = *(const __be32 *)r;
+		rss_lo = r->rss_hdr.rss_hash_val;
+		flags = ntohl(r->flags);
 
 		if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
 			skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
@@ -2497,7 +2501,10 @@ static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
 			refill_rspq(adap, q, q->credits);
 			q->credits = 0;
 		}
-	} while (is_new_response(r, q) && is_pure_response(r));
+		if (!is_new_response(r, q))
+			break;
+		rmb();
+	} while (is_pure_response(r));
 
 	if (sleeping)
 		check_ring_db(adap, qs, sleeping);
@@ -2531,6 +2538,7 @@ static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
 
 	if (!is_new_response(r, q))
 		return -1;
+	rmb();
 	if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
 		t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
 			     V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
-- 
cgit v1.2.3


From 24c4a3b29255f9f8bc48d93597a58256b5a1f83f Mon Sep 17 00:00:00 2001
From: Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
Date: Mon, 1 Feb 2010 09:42:44 +0000
Subject: can: add support for CAN interface cards based on the PLX90xx PCI
 bridge

This driver is for CAN interface cards based on the PLX90xx PCI bridge.
Driver supports now:
 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
 - Adlink PCI-7841/cPCI-7841 SE card
 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)

Changes since v1:
 - Added some defines for static inline int plx_pci_check_sja1000(...)
 - static struct pci_device_id plx_pci_tbl[] replaced by
   static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl)
 - Typo fixed

Signed-off-by: Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/sja1000/Kconfig   |  12 +
 drivers/net/can/sja1000/Makefile  |   1 +
 drivers/net/can/sja1000/plx_pci.c | 472 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 485 insertions(+)
 create mode 100644 drivers/net/can/sja1000/plx_pci.c

(limited to 'drivers/net')

diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 4c674927f247..9e277d64a318 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -44,4 +44,16 @@ config CAN_KVASER_PCI
 	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
 	  4 channel) from Kvaser (http://www.kvaser.com).
 
+config CAN_PLX_PCI
+	tristate "PLX90xx PCI-bridge based Cards"
+	depends on PCI
+	---help---
+	  This driver is for CAN interface cards based on
+	  the PLX90xx PCI bridge.
+	  Driver supports now:
+	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
+	   - Adlink PCI-7841/cPCI-7841 SE card
+	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
+	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
+
 endif
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 9d245ac03965..ce924553995d 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
 obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
 obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
 obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
new file mode 100644
index 000000000000..6b46a6395f80
--- /dev/null
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) 2008-2010 Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
+ *
+ * Derived from the ems_pci.c driver:
+ *	Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ *	Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
+ *	Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME  "sja1000_plx_pci"
+
+MODULE_AUTHOR("Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>");
+MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with "
+		   "the SJA1000 chips");
+MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
+			"Adlink PCI-7841/cPCI-7841 SE, "
+			"Marathon CAN-bus-PCI, "
+			"TEWS TECHNOLOGIES TPMC810");
+MODULE_LICENSE("GPL v2");
+
+#define PLX_PCI_MAX_CHAN 2
+
+struct plx_pci_card {
+	int channels;			/* detected channels count */
+	struct net_device *net_dev[PLX_PCI_MAX_CHAN];
+	void __iomem *conf_addr;
+};
+
+#define PLX_PCI_CAN_CLOCK (16000000 / 2)
+
+/* PLX90xx registers */
+#define PLX_INTCSR	0x4c		/* Interrupt Control/Status */
+#define PLX_CNTRL	0x50		/* User I/O, Direct Slave Response,
+					 * Serial EEPROM, and Initialization
+					 * Control register
+					 */
+
+#define PLX_LINT1_EN	0x1		/* Local interrupt 1 enable */
+#define PLX_LINT2_EN	(1 << 3)	/* Local interrupt 2 enable */
+#define PLX_PCI_INT_EN	(1 << 6)	/* PCI Interrupt Enable */
+#define PLX_PCI_RESET	(1 << 30)	/* PCI Adapter Software Reset */
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means normal output mode, push-pull and the correct polarity.
+ */
+#define PLX_PCI_OCR	(OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 7
+ * (meaning direct oscillator output) because the second SJA1000 chip
+ * is driven by the first one CLKOUT output.
+ */
+#define PLX_PCI_CDR			(CDR_CBP | CDR_CLKOUT_MASK)
+
+/* SJA1000 Control Register in the BasicCAN Mode */
+#define REG_CR				0x00
+
+/* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/
+#define REG_CR_BASICCAN_INITIAL		0x21
+#define REG_CR_BASICCAN_INITIAL_MASK	0xa1
+#define REG_SR_BASICCAN_INITIAL		0x0c
+#define REG_IR_BASICCAN_INITIAL		0xe0
+
+/* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/
+#define REG_MOD_PELICAN_INITIAL		0x01
+#define REG_SR_PELICAN_INITIAL		0x3c
+#define REG_IR_PELICAN_INITIAL		0x00
+
+#define ADLINK_PCI_VENDOR_ID		0x144A
+#define ADLINK_PCI_DEVICE_ID		0x7841
+
+#define MARATHON_PCI_DEVICE_ID		0x2715
+
+#define TEWS_PCI_VENDOR_ID		0x1498
+#define TEWS_PCI_DEVICE_ID_TMPC810	0x032A
+
+static void plx_pci_reset_common(struct pci_dev *pdev);
+static void plx_pci_reset_marathon(struct pci_dev *pdev);
+
+struct plx_pci_channel_map {
+	u32 bar;
+	u32 offset;
+	u32 size;		/* 0x00 - auto, e.g. length of entire bar */
+};
+
+struct plx_pci_card_info {
+	const char *name;
+	int channel_count;
+	u32 can_clock;
+	u8 ocr;			/* output control register */
+	u8 cdr;			/* clock divider register */
+
+	/* Parameters for mapping local configuration space */
+	struct plx_pci_channel_map conf_map;
+
+	/* Parameters for mapping the SJA1000 chips */
+	struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN];
+
+	/* Pointer to device-dependent reset function */
+	void (*reset_func)(struct pci_dev *pdev);
+};
+
+static struct plx_pci_card_info plx_pci_card_info_adlink __devinitdata = {
+	"Adlink PCI-7841/cPCI-7841", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
+	&plx_pci_reset_common
+	/* based on PLX9052 */
+};
+
+static struct plx_pci_card_info plx_pci_card_info_adlink_se __devinitdata = {
+	"Adlink PCI-7841/cPCI-7841 SE", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
+	&plx_pci_reset_common
+	/* based on PLX9052 */
+};
+
+static struct plx_pci_card_info plx_pci_card_info_marathon __devinitdata = {
+	"Marathon CAN-bus-PCI", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} },
+	&plx_pci_reset_marathon
+	/* based on PLX9052 */
+};
+
+static struct plx_pci_card_info plx_pci_card_info_tews __devinitdata = {
+	"TEWS TECHNOLOGIES TPMC810", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
+	&plx_pci_reset_common
+	/* based on PLX9030 */
+};
+
+static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
+	{
+		/* Adlink PCI-7841/cPCI-7841 */
+		ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_NETWORK_OTHER << 8, ~0,
+		(kernel_ulong_t)&plx_pci_card_info_adlink
+	},
+	{
+		/* Adlink PCI-7841/cPCI-7841 SE */
+		ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_OTHER << 8, ~0,
+		(kernel_ulong_t)&plx_pci_card_info_adlink_se
+	},
+	{
+		/* Marathon CAN-bus-PCI card */
+		PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_marathon
+	},
+	{
+		/* TEWS TECHNOLOGIES TPMC810 card */
+		TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_tews
+	},
+	{ 0,}
+};
+MODULE_DEVICE_TABLE(pci, plx_pci_tbl);
+
+static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return ioread8(priv->reg_base + port);
+}
+
+static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
+{
+	iowrite8(val, priv->reg_base + port);
+}
+
+/*
+ * Check if a CAN controller is present at the specified location
+ * by trying to switch 'em from the Basic mode into the PeliCAN mode.
+ * Also check states of some registers in reset mode.
+ */
+static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
+{
+	int flag = 0;
+
+	/*
+	 * Check registers after hardware reset (the Basic mode)
+	 * See states on p. 10 of the Datasheet.
+	 */
+	if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
+	    REG_CR_BASICCAN_INITIAL &&
+	    (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+	    (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
+		flag = 1;
+
+	/* Bring the SJA1000 into the PeliCAN mode*/
+	priv->write_reg(priv, REG_CDR, CDR_PELICAN);
+
+	/*
+	 * Check registers after reset in the PeliCAN mode.
+	 * See states on p. 23 of the Datasheet.
+	 */
+	if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
+	    priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+	    priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
+		return flag;
+
+	return 0;
+}
+
+/*
+ * PLX90xx software reset
+ * Also LRESET# asserts and brings to reset device on the Local Bus (if wired).
+ * For most cards it's enough for reset the SJA1000 chips.
+ */
+static void plx_pci_reset_common(struct pci_dev *pdev)
+{
+	struct plx_pci_card *card = pci_get_drvdata(pdev);
+	u32 cntrl;
+
+	cntrl = ioread32(card->conf_addr + PLX_CNTRL);
+	cntrl |= PLX_PCI_RESET;
+	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
+	udelay(100);
+	cntrl ^= PLX_PCI_RESET;
+	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
+};
+
+/* Special reset function for Marathon card */
+static void plx_pci_reset_marathon(struct pci_dev *pdev)
+{
+	void __iomem *reset_addr;
+	int i;
+	int reset_bar[2] = {3, 5};
+
+	plx_pci_reset_common(pdev);
+
+	for (i = 0; i < 2; i++) {
+		reset_addr = pci_iomap(pdev, reset_bar[i], 0);
+		if (!reset_addr) {
+			dev_err(&pdev->dev, "Failed to remap reset "
+				"space %d (BAR%d)\n", i, reset_bar[i]);
+		} else {
+			/* reset the SJA1000 chip */
+			iowrite8(0x1, reset_addr);
+			udelay(100);
+			pci_iounmap(pdev, reset_addr);
+		}
+	}
+}
+
+static void plx_pci_del_card(struct pci_dev *pdev)
+{
+	struct plx_pci_card *card = pci_get_drvdata(pdev);
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	int i = 0;
+
+	for (i = 0; i < card->channels; i++) {
+		dev = card->net_dev[i];
+		if (!dev)
+			continue;
+
+		dev_info(&pdev->dev, "Removing %s\n", dev->name);
+		unregister_sja1000dev(dev);
+		priv = netdev_priv(dev);
+		if (priv->reg_base)
+			pci_iounmap(pdev, priv->reg_base);
+		free_sja1000dev(dev);
+	}
+
+	plx_pci_reset_common(pdev);
+
+	/*
+	 * Disable interrupts from PCI-card (PLX90xx) and disable Local_1,
+	 * Local_2 interrupts
+	 */
+	iowrite32(0x0, card->conf_addr + PLX_INTCSR);
+
+	if (card->conf_addr)
+		pci_iounmap(pdev, card->conf_addr);
+
+	kfree(card);
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+/*
+ * Probe PLX90xx based device for the SJA1000 chips and register each
+ * available CAN channel to SJA1000 Socket-CAN subsystem.
+ */
+static int __devinit plx_pci_add_card(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
+{
+	struct sja1000_priv *priv;
+	struct net_device *dev;
+	struct plx_pci_card *card;
+	struct plx_pci_card_info *ci;
+	int err, i;
+	u32 val;
+	void __iomem *addr;
+
+	ci = (struct plx_pci_card_info *)ent->driver_data;
+
+	if (pci_enable_device(pdev) < 0) {
+		dev_err(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+
+	dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n",
+		 ci->name, PCI_SLOT(pdev->devfn));
+
+	/* Allocate card structures to hold addresses, ... */
+	card = kzalloc(sizeof(*card), GFP_KERNEL);
+	if (!card) {
+		dev_err(&pdev->dev, "Unable to allocate memory\n");
+		pci_disable_device(pdev);
+		return -ENOMEM;
+	}
+
+	pci_set_drvdata(pdev, card);
+
+	card->channels = 0;
+
+	/* Remap PLX90xx configuration space */
+	addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size);
+	if (!addr) {
+		err = -ENOMEM;
+		dev_err(&pdev->dev, "Failed to remap configuration space "
+			"(BAR%d)\n", ci->conf_map.bar);
+		goto failure_cleanup;
+	}
+	card->conf_addr = addr + ci->conf_map.offset;
+
+	ci->reset_func(pdev);
+
+	/* Detect available channels */
+	for (i = 0; i < ci->channel_count; i++) {
+		struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i];
+
+		dev = alloc_sja1000dev(0);
+		if (!dev) {
+			err = -ENOMEM;
+			goto failure_cleanup;
+		}
+
+		card->net_dev[i] = dev;
+		priv = netdev_priv(dev);
+		priv->priv = card;
+		priv->irq_flags = IRQF_SHARED;
+
+		dev->irq = pdev->irq;
+
+		/*
+		 * Remap IO space of the SJA1000 chips
+		 * This is device-dependent mapping
+		 */
+		addr = pci_iomap(pdev, cm->bar, cm->size);
+		if (!addr) {
+			err = -ENOMEM;
+			dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
+			goto failure_cleanup;
+		}
+
+		priv->reg_base = addr + cm->offset;
+		priv->read_reg = plx_pci_read_reg;
+		priv->write_reg = plx_pci_write_reg;
+
+		/* Check if channel is present */
+		if (plx_pci_check_sja1000(priv)) {
+			priv->can.clock.freq = ci->can_clock;
+			priv->ocr = ci->ocr;
+			priv->cdr = ci->cdr;
+
+			SET_NETDEV_DEV(dev, &pdev->dev);
+
+			/* Register SJA1000 device */
+			err = register_sja1000dev(dev);
+			if (err) {
+				dev_err(&pdev->dev, "Registering device failed "
+					"(err=%d)\n", err);
+				free_sja1000dev(dev);
+				goto failure_cleanup;
+			}
+
+			card->channels++;
+
+			dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d "
+				 "registered as %s\n", i + 1, priv->reg_base,
+				 dev->irq, dev->name);
+		} else {
+			dev_err(&pdev->dev, "Channel #%d not detected\n",
+				i + 1);
+			free_sja1000dev(dev);
+		}
+	}
+
+	if (!card->channels) {
+		err = -ENODEV;
+		goto failure_cleanup;
+	}
+
+	/*
+	 * Enable interrupts from PCI-card (PLX90xx) and enable Local_1,
+	 * Local_2 interrupts from the SJA1000 chips
+	 */
+	val = ioread32(card->conf_addr + PLX_INTCSR);
+	val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN;
+	iowrite32(val, card->conf_addr + PLX_INTCSR);
+
+	return 0;
+
+failure_cleanup:
+	dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);
+
+	plx_pci_del_card(pdev);
+
+	return err;
+}
+
+static struct pci_driver plx_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = plx_pci_tbl,
+	.probe = plx_pci_add_card,
+	.remove = plx_pci_del_card,
+};
+
+static int __init plx_pci_init(void)
+{
+	return pci_register_driver(&plx_pci_driver);
+}
+
+static void __exit plx_pci_exit(void)
+{
+	pci_unregister_driver(&plx_pci_driver);
+}
+
+module_init(plx_pci_init);
+module_exit(plx_pci_exit);
-- 
cgit v1.2.3


From 91e83432f8abc1fc93499a2323f6c4bd6026029e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 31 Jan 2010 10:02:09 +0000
Subject: drivers/net/amd8111e.c: Fix continuation line formats

String constants that are continued on subsequent lines with \
are not good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/amd8111e.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 545c791f477e..bb27b27d9672 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1176,8 +1176,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
 			/* Schedule a polling routine */
 			__napi_schedule(&lp->napi);
 		} else if (intren0 & RINTEN0) {
-			printk("************Driver bug! \
-				interrupt while in poll\n");
+			printk("************Driver bug! interrupt while in poll\n");
 			/* Fix by disable receive interrupts */
 			writel(RINTEN0, mmio + INTEN0);
 		}
-- 
cgit v1.2.3


From 5297a98d5dd6de86fe1e2ffc9ea60cdf59b71443 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 3 Feb 2010 09:28:14 +0000
Subject: sfc: Update MCDI protocol definitions

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/mcdi_pcol.h | 202 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 179 insertions(+), 23 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
index 73e71f420624..bd59302695b3 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -786,16 +786,18 @@
 #define MC_CMD_GET_PHY_CFG_OUT_FLAGS_OFST 0
 #define MC_CMD_GET_PHY_CFG_PRESENT_LBN 0
 #define MC_CMD_GET_PHY_CFG_PRESENT_WIDTH 1
-#define MC_CMD_GET_PHY_CFG_SHORTBIST_LBN 1
-#define MC_CMD_GET_PHY_CFG_SHORTBIST_WIDTH 1
-#define MC_CMD_GET_PHY_CFG_LONGBIST_LBN 2
-#define MC_CMD_GET_PHY_CFG_LONGBIST_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_LBN 1
+#define MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_LBN 2
+#define MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_WIDTH 1
 #define MC_CMD_GET_PHY_CFG_LOWPOWER_LBN 3
 #define MC_CMD_GET_PHY_CFG_LOWPOWER_WIDTH 1
 #define MC_CMD_GET_PHY_CFG_POWEROFF_LBN 4
 #define MC_CMD_GET_PHY_CFG_POWEROFF_WIDTH 1
 #define MC_CMD_GET_PHY_CFG_TXDIS_LBN 5
 #define MC_CMD_GET_PHY_CFG_TXDIS_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_BIST_LBN 6
+#define MC_CMD_GET_PHY_CFG_BIST_WIDTH 1
 #define MC_CMD_GET_PHY_CFG_OUT_TYPE_OFST 4
 /* Bitmask of supported capabilities */
 #define MC_CMD_GET_PHY_CFG_OUT_SUPPORTED_CAP_OFST 8
@@ -832,7 +834,7 @@
 #define MC_CMD_GET_PHY_CFG_OUT_REVISION_OFST 52
 #define MC_CMD_GET_PHY_CFG_OUT_REVISION_LEN 20
 
-/* MC_CMD_START_PHY_BIST:
+/* MC_CMD_START_BIST:
  * Start a BIST test on the PHY.
  *
  * Locks required: PHY_LOCK if doing a  PHY BIST
@@ -840,34 +842,71 @@
  */
 #define MC_CMD_START_BIST 0x25
 #define MC_CMD_START_BIST_IN_LEN 4
-#define MC_CMD_START_BIST_TYPE_OFST 0
+#define MC_CMD_START_BIST_IN_TYPE_OFST 0
+#define MC_CMD_START_BIST_OUT_LEN 0
 
-/* Run the PHY's short BIST */
-#define MC_CMD_PHY_BIST_SHORT  1
-/* Run the PHY's long BIST */
-#define MC_CMD_PHY_BIST_LONG   2
+/* Run the PHY's short cable BIST */
+#define MC_CMD_PHY_BIST_CABLE_SHORT  1
+/* Run the PHY's long cable BIST */
+#define MC_CMD_PHY_BIST_CABLE_LONG   2
 /* Run BIST on the currently selected BPX Serdes (XAUI or XFI) */
 #define MC_CMD_BPX_SERDES_BIST 3
+/* Run the MC loopback tests */
+#define MC_CMD_MC_LOOPBACK_BIST 4
+/* Run the PHY's standard BIST */
+#define MC_CMD_PHY_BIST 5
 
 /* MC_CMD_POLL_PHY_BIST: (variadic output)
  * Poll for BIST completion
  *
- * Returns a single status code, and a binary blob of phy-specific
- * bist output. If the driver can't succesfully parse the BIST output,
- * it should still respect the Pass/Fail in OUT.RESULT.
+ * Returns a single status code, and optionally some PHY specific
+ * bist output. The driver should only consume the BIST output
+ * after validating OUTLEN and PHY_CFG.PHY_TYPE.
  *
- * Locks required: PHY_LOCK  if doing a  PHY BIST
+ * If a driver can't succesfully parse the BIST output, it should
+ * still respect the pass/Fail in OUT.RESULT
+ *
+ * Locks required: PHY_LOCK if doing a  PHY BIST
  * Return code: 0, EACCES (if PHY_LOCK is not held)
  */
 #define MC_CMD_POLL_BIST 0x26
 #define MC_CMD_POLL_BIST_IN_LEN 0
 #define MC_CMD_POLL_BIST_OUT_LEN UNKNOWN
+#define MC_CMD_POLL_BIST_OUT_SFT9001_LEN 40
+#define MC_CMD_POLL_BIST_OUT_MRSFP_LEN 8
 #define MC_CMD_POLL_BIST_OUT_RESULT_OFST 0
 #define MC_CMD_POLL_BIST_RUNNING 1
 #define MC_CMD_POLL_BIST_PASSED 2
 #define MC_CMD_POLL_BIST_FAILED 3
 #define MC_CMD_POLL_BIST_TIMEOUT 4
+/* Generic: */
 #define MC_CMD_POLL_BIST_OUT_PRIVATE_OFST 4
+/* SFT9001-specific: */
+/* (offset 4 unused?) */
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A_OFST 8
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_B_OFST 12
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_C_OFST 16
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_D_OFST 20
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_A_OFST 24
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_B_OFST 28
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_C_OFST 32
+#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_D_OFST 36
+#define MC_CMD_POLL_BIST_SFT9001_PAIR_OK 1
+#define MC_CMD_POLL_BIST_SFT9001_PAIR_OPEN 2
+#define MC_CMD_POLL_BIST_SFT9001_INTRA_PAIR_SHORT 3
+#define MC_CMD_POLL_BIST_SFT9001_INTER_PAIR_SHORT 4
+#define MC_CMD_POLL_BIST_SFT9001_PAIR_BUSY 9
+/* mrsfp "PHY" driver: */
+#define MC_CMD_POLL_BIST_OUT_MRSFP_TEST_OFST 4
+#define MC_CMD_POLL_BIST_MRSFP_TEST_COMPLETE 0
+#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_WRITE 1
+#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_NO_ACCESS_IO_EXP 2
+#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_NO_ACCESS_MODULE 3
+#define MC_CMD_POLL_BIST_MRSFP_TEST_IO_EXP_I2C_CONFIGURE 4
+#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_I2C_NO_CROSSTALK 5
+#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_PRESENCE 6
+#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_ID_I2C_ACCESS 7
+#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_ID_SANE_VALUE 8
 
 /* MC_CMD_PHY_SPI: (variadic in, variadic out)
  * Read/Write/Erase the PHY SPI device
@@ -1206,6 +1245,13 @@
 #define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER4_OFST	\
 	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 178)
 
+#define MC_CMD_WOL_FILTER_SET_IN_LINK_MASK_OFST	\
+	MC_CMD_WOL_FILTER_SET_IN_DATA_OFST
+#define MC_CMD_WOL_FILTER_SET_IN_LINK_UP_LBN	0
+#define MC_CMD_WOL_FILTER_SET_IN_LINK_UP_WIDTH	1
+#define MC_CMD_WOL_FILTER_SET_IN_LINK_DOWN_LBN	1
+#define MC_CMD_WOL_FILTER_SET_IN_LINK_DOWN_WIDTH 1
+
 #define MC_CMD_WOL_FILTER_SET_OUT_LEN 4
 #define MC_CMD_WOL_FILTER_SET_OUT_FILTER_ID_OFST 0
 
@@ -1216,7 +1262,8 @@
 #define MC_CMD_WOL_TYPE_IPV4_SYN   0x3
 #define MC_CMD_WOL_TYPE_IPV6_SYN   0x4
 #define MC_CMD_WOL_TYPE_BITMAP     0x5
-#define MC_CMD_WOL_TYPE_MAX        0x6
+#define MC_CMD_WOL_TYPE_LINK       0x6
+#define MC_CMD_WOL_TYPE_MAX        0x7
 
 #define MC_CMD_FILTER_MODE_SIMPLE     0x0
 #define MC_CMD_FILTER_MODE_STRUCTURED 0xffffffff
@@ -1357,14 +1404,24 @@
  * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held)
  */
 #define MC_CMD_NVRAM_UPDATE_FINISH 0x3c
-#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 4
+#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 8
 #define MC_CMD_NVRAM_UPDATE_FINISH_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_UPDATE_FINISH_IN_REBOOT_OFST 4
 #define MC_CMD_NVRAM_UPDATE_FINISH_OUT_LEN 0
 
 /* MC_CMD_REBOOT:
- * Reboot the MC. The AFTER_ASSERTION flag is intended to be used
- * when the driver notices an assertion failure, to allow two ports to
- * both recover (semi-)gracefully.
+ * Reboot the MC.
+ *
+ * The AFTER_ASSERTION flag is intended to be used when the driver notices
+ * an assertion failure (at which point it is expected to perform a complete
+ * tear down and reinitialise), to allow both ports to reset the MC once
+ * in an atomic fashion.
+ *
+ * Production mc firmwares are generally compiled with REBOOT_ON_ASSERT=1,
+ * which means that they will automatically reboot out of the assertion
+ * handler, so this is in practise an optional operation. It is still
+ * recommended that drivers execute this to support custom firmwares
+ * with REBOOT_ON_ASSERT=0.
  *
  * Locks required: NONE
  * Returns: Nothing. You get back a response with ERR=1, DATALEN=0
@@ -1469,11 +1526,10 @@
 	((_ofst) + 6)
 
 /* MC_CMD_READ_SENSORS
- * Returns the current (value, state) for each sensor
+ * Returns the current reading from each sensor
  *
- * Returns the current (value, state) [each 16bit] of each sensor supported by
- * this board, by DMA'ing a sparse array (indexed by the sensor type) into host
- * memory.
+ * Returns a sparse array of sensor readings (indexed by the sensor
+ * type) into host memory.  Each array element is a dword.
  *
  * The MC will send a SENSOREVT event every time any sensor changes state. The
  * driver is responsible for ensuring that it doesn't miss any events. The board
@@ -1486,6 +1542,12 @@
 #define MC_CMD_READ_SENSORS_IN_DMA_ADDR_HI_OFST 4
 #define MC_CMD_READ_SENSORS_OUT_LEN 0
 
+/* Sensor reading fields */
+#define MC_CMD_READ_SENSOR_VALUE_LBN 0
+#define MC_CMD_READ_SENSOR_VALUE_WIDTH 16
+#define MC_CMD_READ_SENSOR_STATE_LBN 16
+#define MC_CMD_READ_SENSOR_STATE_WIDTH 8
+
 
 /* MC_CMD_GET_PHY_STATE:
  * Report current state of PHY.  A "zombie" PHY is a PHY that has failed to
@@ -1577,4 +1639,98 @@
 #define MC_CMD_MAC_RESET_RESTORE_IN_LEN 0
 #define MC_CMD_MAC_RESET_RESTORE_OUT_LEN 0
 
+
+/* MC_CMD_TEST_ASSERT:
+ * Deliberately trigger an assert-detonation in the firmware for testing
+ * purposes (i.e. to allow tests that the driver copes gracefully).
+ *
+ * Locks required: None
+ * Returns: 0
+ */
+
+#define MC_CMD_TESTASSERT 0x49
+#define MC_CMD_TESTASSERT_IN_LEN 0
+#define MC_CMD_TESTASSERT_OUT_LEN 0
+
+/* MC_CMD_WORKAROUND 0x4a
+ *
+ * Enable/Disable a given workaround. The mcfw will return EINVAL if it
+ * doesn't understand the given workaround number - which should not
+ * be treated as a hard error by client code.
+ *
+ * This op does not imply any semantics about each workaround, that's between
+ * the driver and the mcfw on a per-workaround basis.
+ *
+ * Locks required: None
+ * Returns: 0, EINVAL
+ */
+#define MC_CMD_WORKAROUND 0x4a
+#define MC_CMD_WORKAROUND_IN_LEN 8
+#define MC_CMD_WORKAROUND_IN_TYPE_OFST 0
+#define MC_CMD_WORKAROUND_BUG17230 1
+#define MC_CMD_WORKAROUND_IN_ENABLED_OFST 4
+#define MC_CMD_WORKAROUND_OUT_LEN 0
+
+/* MC_CMD_GET_PHY_MEDIA_INFO:
+ * Read media-specific data from PHY (e.g. SFP/SFP+ module ID information for
+ * SFP+ PHYs).
+ *
+ * The "media type" can be found via GET_PHY_CFG (GET_PHY_CFG_OUT_MEDIA_TYPE);
+ * the valid "page number" input values, and the output data, are interpreted
+ * on a per-type basis.
+ *
+ * For SFP+: PAGE=0 or 1 returns a 128-byte block read from module I2C address
+ *           0xA0 offset 0 or 0x80.
+ * Anything else: currently undefined.
+ *
+ * Locks required: None
+ * Return code: 0
+ */
+#define MC_CMD_GET_PHY_MEDIA_INFO 0x4b
+#define MC_CMD_GET_PHY_MEDIA_INFO_IN_LEN 4
+#define MC_CMD_GET_PHY_MEDIA_INFO_IN_PAGE_OFST 0
+#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LEN(_num_bytes) (4 + (_num_bytes))
+#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATALEN_OFST 0
+#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_OFST 4
+
+/* MC_CMD_NVRAM_TEST:
+ * Test a particular NVRAM partition for valid contents (where "valid"
+ * depends on the type of partition).
+ *
+ * Locks required: None
+ * Return code: 0
+ */
+#define MC_CMD_NVRAM_TEST 0x4c
+#define MC_CMD_NVRAM_TEST_IN_LEN 4
+#define MC_CMD_NVRAM_TEST_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_TEST_OUT_LEN 4
+#define MC_CMD_NVRAM_TEST_OUT_RESULT_OFST 0
+#define MC_CMD_NVRAM_TEST_PASS 0
+#define MC_CMD_NVRAM_TEST_FAIL 1
+#define MC_CMD_NVRAM_TEST_NOTSUPP 2
+
+/* MC_CMD_MRSFP_TWEAK: (debug)
+ * Read status and/or set parameters for the "mrsfp" driver in mr_rusty builds.
+ * I2C I/O expander bits are always read; if equaliser parameters are supplied,
+ * they are configured first.
+ *
+ * Locks required: None
+ * Return code: 0, EINVAL
+ */
+#define MC_CMD_MRSFP_TWEAK 0x4d
+#define MC_CMD_MRSFP_TWEAK_IN_LEN_READ_ONLY 0
+#define MC_CMD_MRSFP_TWEAK_IN_LEN_EQ_CONFIG 16
+#define MC_CMD_MRSFP_TWEAK_IN_TXEQ_LEVEL_OFST 0    /* 0-6 low->high de-emph. */
+#define MC_CMD_MRSFP_TWEAK_IN_TXEQ_DT_CFG_OFST 4   /* 0-8 low->high ref.V */
+#define MC_CMD_MRSFP_TWEAK_IN_RXEQ_BOOST_OFST 8    /* 0-8 low->high boost */
+#define MC_CMD_MRSFP_TWEAK_IN_RXEQ_DT_CFG_OFST 12  /* 0-8 low->high ref.V */
+#define MC_CMD_MRSFP_TWEAK_OUT_LEN 12
+#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_INPUTS_OFST 0     /* input bits */
+#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_OUTPUTS_OFST 4    /* output bits */
+#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_DIRECTION_OFST 8  /* dirs: 0=out, 1=in */
+
+/* Do NOT add new commands beyond 0x4f as part of 3.0 : 0x50 - 0x7f will be
+ * used for post-3.0 extensions. If you run out of space, look for gaps or
+ * commands that are unused in the existing range. */
+
 #endif /* MCDI_PCOL_H */
-- 
cgit v1.2.3


From 8b2103add08b79abd3ac7015b4bac744c0af534e Mon Sep 17 00:00:00 2001
From: Steve Hodgson <shodgson@solarflare.com>
Date: Wed, 3 Feb 2010 09:30:17 +0000
Subject: sfc: Handle firmware assertion failure while resetting

This allows the driver to recover if the MC firmware has crashed due
to an assertion failure.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/mcdi.c  | 63 +++++++++++++++++++++++++++++--------------------
 drivers/net/sfc/siena.c |  6 +++++
 2 files changed, 44 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 9f035b9f0350..e9f0e5ee4519 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -896,29 +896,27 @@ fail:
 	return rc;
 }
 
-int efx_mcdi_handle_assertion(struct efx_nic *efx)
+static int efx_mcdi_read_assertion(struct efx_nic *efx)
 {
-	union {
-		u8 asserts[MC_CMD_GET_ASSERTS_IN_LEN];
-		u8 reboot[MC_CMD_REBOOT_IN_LEN];
-	} inbuf;
-	u8 assertion[MC_CMD_GET_ASSERTS_OUT_LEN];
+	u8 inbuf[MC_CMD_GET_ASSERTS_IN_LEN];
+	u8 outbuf[MC_CMD_GET_ASSERTS_OUT_LEN];
 	unsigned int flags, index, ofst;
 	const char *reason;
 	size_t outlen;
 	int retry;
 	int rc;
 
-	/* Check if the MC is in the assertion handler, retrying twice. Once
+	/* Attempt to read any stored assertion state before we reboot
+	 * the mcfw out of the assertion handler. Retry twice, once
 	 * because a boot-time assertion might cause this command to fail
 	 * with EINTR. And once again because GET_ASSERTS can race with
 	 * MC_CMD_REBOOT running on the other port. */
 	retry = 2;
 	do {
-		MCDI_SET_DWORD(inbuf.asserts, GET_ASSERTS_IN_CLEAR, 0);
+		MCDI_SET_DWORD(inbuf, GET_ASSERTS_IN_CLEAR, 1);
 		rc = efx_mcdi_rpc(efx, MC_CMD_GET_ASSERTS,
-				  inbuf.asserts, MC_CMD_GET_ASSERTS_IN_LEN,
-				  assertion, sizeof(assertion), &outlen);
+				  inbuf, MC_CMD_GET_ASSERTS_IN_LEN,
+				  outbuf, sizeof(outbuf), &outlen);
 	} while ((rc == -EINTR || rc == -EIO) && retry-- > 0);
 
 	if (rc)
@@ -926,21 +924,11 @@ int efx_mcdi_handle_assertion(struct efx_nic *efx)
 	if (outlen < MC_CMD_GET_ASSERTS_OUT_LEN)
 		return -EINVAL;
 
-	flags = MCDI_DWORD(assertion, GET_ASSERTS_OUT_GLOBAL_FLAGS);
+	/* Print out any recorded assertion state */
+	flags = MCDI_DWORD(outbuf, GET_ASSERTS_OUT_GLOBAL_FLAGS);
 	if (flags == MC_CMD_GET_ASSERTS_FLAGS_NO_FAILS)
 		return 0;
 
-	/* Reset the hardware atomically such that only one port with succeed.
-	 * This command will succeed if a reboot is no longer required (because
-	 * the other port did it first), but fail with EIO if it succeeds.
-	 */
-	BUILD_BUG_ON(MC_CMD_REBOOT_OUT_LEN != 0);
-	MCDI_SET_DWORD(inbuf.reboot, REBOOT_IN_FLAGS,
-		       MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION);
-	efx_mcdi_rpc(efx, MC_CMD_REBOOT, inbuf.reboot, MC_CMD_REBOOT_IN_LEN,
-		     NULL, 0, NULL);
-
-	/* Print out the assertion */
 	reason = (flags == MC_CMD_GET_ASSERTS_FLAGS_SYS_FAIL)
 		? "system-level assertion"
 		: (flags == MC_CMD_GET_ASSERTS_FLAGS_THR_FAIL)
@@ -949,20 +937,45 @@ int efx_mcdi_handle_assertion(struct efx_nic *efx)
 		? "watchdog reset"
 		: "unknown assertion";
 	EFX_ERR(efx, "MCPU %s at PC = 0x%.8x in thread 0x%.8x\n", reason,
-		MCDI_DWORD(assertion, GET_ASSERTS_OUT_SAVED_PC_OFFS),
-		MCDI_DWORD(assertion, GET_ASSERTS_OUT_THREAD_OFFS));
+		MCDI_DWORD(outbuf, GET_ASSERTS_OUT_SAVED_PC_OFFS),
+		MCDI_DWORD(outbuf, GET_ASSERTS_OUT_THREAD_OFFS));
 
 	/* Print out the registers */
 	ofst = MC_CMD_GET_ASSERTS_OUT_GP_REGS_OFFS_OFST;
 	for (index = 1; index < 32; index++) {
 		EFX_ERR(efx, "R%.2d (?): 0x%.8x\n", index,
-			MCDI_DWORD2(assertion, ofst));
+			MCDI_DWORD2(outbuf, ofst));
 		ofst += sizeof(efx_dword_t);
 	}
 
 	return 0;
 }
 
+static void efx_mcdi_exit_assertion(struct efx_nic *efx)
+{
+	u8 inbuf[MC_CMD_REBOOT_IN_LEN];
+
+	/* Atomically reboot the mcfw out of the assertion handler */
+	BUILD_BUG_ON(MC_CMD_REBOOT_OUT_LEN != 0);
+	MCDI_SET_DWORD(inbuf, REBOOT_IN_FLAGS,
+		       MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION);
+	efx_mcdi_rpc(efx, MC_CMD_REBOOT, inbuf, MC_CMD_REBOOT_IN_LEN,
+		     NULL, 0, NULL);
+}
+
+int efx_mcdi_handle_assertion(struct efx_nic *efx)
+{
+	int rc;
+
+	rc = efx_mcdi_read_assertion(efx);
+	if (rc)
+		return rc;
+
+	efx_mcdi_exit_assertion(efx);
+
+	return 0;
+}
+
 void efx_mcdi_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
 {
 	u8 inbuf[MC_CMD_SET_ID_LED_IN_LEN];
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index f8c6771e66d8..0e4c13abf087 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -181,6 +181,12 @@ static int siena_test_registers(struct efx_nic *efx)
 
 static int siena_reset_hw(struct efx_nic *efx, enum reset_type method)
 {
+	int rc;
+
+	/* Recover from a failed assertion pre-reset */
+	rc = efx_mcdi_handle_assertion(efx);
+	if (rc)
+		return rc;
 
 	if (method == RESET_TYPE_WORLD)
 		return efx_mcdi_reset_mc(efx);
-- 
cgit v1.2.3


From 7a6b8f6f7f74085a1330b0f9765d81bcea8c58b7 Mon Sep 17 00:00:00 2001
From: Steve Hodgson <shodgson@solarflare.com>
Date: Wed, 3 Feb 2010 09:30:38 +0000
Subject: sfc: Enable autonegotiated flow-control by default if supported

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/falcon.c   |  2 ++
 drivers/net/sfc/mcdi_phy.c | 14 +++++++++++++-
 drivers/net/sfc/siena.c    |  7 +------
 3 files changed, 16 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 9d009c46e962..1e7858511e35 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -909,6 +909,8 @@ static int falcon_probe_port(struct efx_nic *efx)
 		efx->wanted_fc = EFX_FC_RX | EFX_FC_TX;
 	else
 		efx->wanted_fc = EFX_FC_RX;
+	if (efx->mdio.mmds & MDIO_DEVS_AN)
+		efx->wanted_fc |= EFX_FC_AUTO;
 
 	/* Allocate buffer for stats */
 	rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer,
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index eb694af7a473..d87e74d3994e 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -381,6 +381,18 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx)
 	 * but by convention we don't */
 	efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
 
+	/* Set the initial link mode */
+	efx_mcdi_phy_decode_link(
+		efx, &efx->link_state,
+		MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED),
+		MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS),
+		MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL));
+
+	/* Default to Autonegotiated flow control if the PHY supports it */
+	efx->wanted_fc = EFX_FC_RX | EFX_FC_TX;
+	if (phy_data->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
+		efx->wanted_fc |= EFX_FC_AUTO;
+
 	return 0;
 
 fail:
@@ -436,7 +448,7 @@ void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa)
 
 	/* The link partner capabilities are only relevent if the
 	 * link supports flow control autonegotiation */
-	if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_ASYM_LBN))
+	if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
 		return;
 
 	/* If flow control autoneg is supported and enabled, then fine */
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 0e4c13abf087..f6a53895ff27 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -106,16 +106,11 @@ static int siena_probe_port(struct efx_nic *efx)
 	efx->mdio.mdio_read = siena_mdio_read;
 	efx->mdio.mdio_write = siena_mdio_write;
 
-	/* Fill out MDIO structure and loopback modes */
+	/* Fill out MDIO structure, loopback modes, and initial link state */
 	rc = efx->phy_op->probe(efx);
 	if (rc != 0)
 		return rc;
 
-	/* Initial assumption */
-	efx->link_state.speed = 10000;
-	efx->link_state.fd = true;
-	efx->wanted_fc = EFX_FC_RX | EFX_FC_TX;
-
 	/* Allocate buffer for stats */
 	rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer,
 				  MC_CMD_MAC_NSTATS * sizeof(u64));
-- 
cgit v1.2.3


From 4f16c0739145476ba37a7fa9eea0c33850efc2ce Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 3 Feb 2010 09:30:50 +0000
Subject: sfc: Replace PHY MDIO test with an 'alive' test

SFC9000-family boards do not all use MDIO PHYs, so we need a different
test for PHY aliveness.

Introduce a PHY operation test_alive().  For PHYs attached to Falcon,
use a common implementation based on the existing PHY MDIO test.
For PHYs managed through MCDI, use the appropriate MCDI request.

Change test name in ethtool from 'core mdio' to 'phy alive'.

Rename test_results::mdio to phy_alive and test_results::phy to phy_ext.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/ethtool.c    |  6 +++---
 drivers/net/sfc/mcdi_phy.c   | 22 ++++++++++++++++++++++
 drivers/net/sfc/mdio_10g.c   | 24 ++++++++++++++++++++++++
 drivers/net/sfc/mdio_10g.h   |  3 +++
 drivers/net/sfc/net_driver.h |  4 +++-
 drivers/net/sfc/qt202x_phy.c |  1 +
 drivers/net/sfc/selftest.c   | 40 ++++++----------------------------------
 drivers/net/sfc/selftest.h   |  4 ++--
 drivers/net/sfc/tenxpress.c  |  2 ++
 9 files changed, 66 insertions(+), 40 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 6c0bbed8c477..635c4205b4fb 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -342,8 +342,8 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
 	unsigned int n = 0, i;
 	enum efx_loopback_mode mode;
 
-	efx_fill_test(n++, strings, data, &tests->mdio,
-		      "core", 0, "mdio", NULL);
+	efx_fill_test(n++, strings, data, &tests->phy_alive,
+		      "phy", 0, "alive", NULL);
 	efx_fill_test(n++, strings, data, &tests->nvram,
 		      "core", 0, "nvram", NULL);
 	efx_fill_test(n++, strings, data, &tests->interrupt,
@@ -379,7 +379,7 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
 			if (name == NULL)
 				break;
 
-			efx_fill_test(n++, strings, data, &tests->phy[i],
+			efx_fill_test(n++, strings, data, &tests->phy_ext[i],
 				      "phy", 0, name, NULL);
 		}
 	}
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index d87e74d3994e..34c22fa986e2 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -572,6 +572,27 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
 	return 0;
 }
 
+static int efx_mcdi_phy_test_alive(struct efx_nic *efx)
+{
+	u8 outbuf[MC_CMD_GET_PHY_STATE_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_GET_PHY_STATE_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_STATE, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		return rc;
+
+	if (outlen < MC_CMD_GET_PHY_STATE_OUT_LEN)
+		return -EMSGSIZE;
+	if (MCDI_DWORD(outbuf, GET_PHY_STATE_STATE) != MC_CMD_PHY_STATE_OK)
+		return -EINVAL;
+
+	return 0;
+}
+
 struct efx_phy_operations efx_mcdi_phy_ops = {
 	.probe		= efx_mcdi_phy_probe,
 	.init 	 	= efx_port_dummy_op_int,
@@ -581,6 +602,7 @@ struct efx_phy_operations efx_mcdi_phy_ops = {
 	.remove		= efx_mcdi_phy_remove,
 	.get_settings	= efx_mcdi_phy_get_settings,
 	.set_settings	= efx_mcdi_phy_set_settings,
+	.test_alive	= efx_mcdi_phy_test_alive,
 	.run_tests	= NULL,
 	.test_name	= NULL,
 };
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 1574e52f0594..0548fcbbdcd0 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -335,3 +335,27 @@ enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
 		mii_advertise_flowctrl(efx->wanted_fc),
 		efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA));
 }
+
+int efx_mdio_test_alive(struct efx_nic *efx)
+{
+	int rc;
+	int devad = __ffs(efx->mdio.mmds);
+	u16 physid1, physid2;
+
+	mutex_lock(&efx->mac_lock);
+
+	physid1 = efx_mdio_read(efx, devad, MDIO_DEVID1);
+	physid2 = efx_mdio_read(efx, devad, MDIO_DEVID2);
+
+	if ((physid1 == 0x0000) || (physid1 == 0xffff) ||
+	    (physid2 == 0x0000) || (physid2 == 0xffff)) {
+		EFX_ERR(efx, "no MDIO PHY present with ID %d\n",
+			efx->mdio.prtad);
+		rc = -EINVAL;
+	} else {
+		rc = efx_mdio_check_mmds(efx, efx->mdio.mmds, 0);
+	}
+
+	mutex_unlock(&efx->mac_lock);
+	return rc;
+}
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index f6ac9503339d..f89e71929603 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -106,4 +106,7 @@ efx_mdio_set_flag(struct efx_nic *efx, int devad, int addr,
 	mdio_set_flag(&efx->mdio, efx->mdio.prtad, devad, addr, mask, state);
 }
 
+/* Liveness self-test for MDIO PHYs */
+extern int efx_mdio_test_alive(struct efx_nic *efx);
+
 #endif /* EFX_MDIO_10G_H */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index d5aab5b3fa06..8f951e4f15be 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -516,8 +516,9 @@ struct efx_mac_operations {
  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
  * @set_npage_adv: Set abilities advertised in (Extended) Next Page
  *	(only needed where AN bit is set in mmds)
+ * @test_alive: Test that PHY is 'alive' (online)
  * @test_name: Get the name of a PHY-specific test/result
- * @run_tests: Run tests and record results as appropriate.
+ * @run_tests: Run tests and record results as appropriate (offline).
  *	Flags are the ethtool tests flags.
  */
 struct efx_phy_operations {
@@ -532,6 +533,7 @@ struct efx_phy_operations {
 	int (*set_settings) (struct efx_nic *efx,
 			     struct ethtool_cmd *ecmd);
 	void (*set_npage_adv) (struct efx_nic *efx, u32);
+	int (*test_alive) (struct efx_nic *efx);
 	const char *(*test_name) (struct efx_nic *efx, unsigned int index);
 	int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
 };
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index e0d13a451019..14793d8bd661 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -445,4 +445,5 @@ struct efx_phy_operations falcon_qt202x_phy_ops = {
 	.remove	  	 = qt202x_phy_remove,
 	.get_settings	 = qt202x_phy_get_settings,
 	.set_settings	 = efx_mdio_set_settings,
+	.test_alive	 = efx_mdio_test_alive,
 };
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 250c8827b842..8a5a7b6d042d 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -26,7 +26,6 @@
 #include "workarounds.h"
 #include "spi.h"
 #include "io.h"
-#include "mdio_10g.h"
 
 /*
  * Loopback test packet structure
@@ -76,42 +75,15 @@ struct efx_loopback_state {
  *
  **************************************************************************/
 
-static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
+static int efx_test_phy_alive(struct efx_nic *efx, struct efx_self_tests *tests)
 {
 	int rc = 0;
-	int devad;
-	u16 physid1, physid2;
-
-	if (efx->mdio.mode_support & MDIO_SUPPORTS_C45)
-		devad = __ffs(efx->mdio.mmds);
-	else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22)
-		devad = MDIO_DEVAD_NONE;
-	else
-		return 0;
-
-	mutex_lock(&efx->mac_lock);
-	tests->mdio = -1;
-
-	physid1 = efx_mdio_read(efx, devad, MDIO_DEVID1);
-	physid2 = efx_mdio_read(efx, devad, MDIO_DEVID2);
 
-	if ((physid1 == 0x0000) || (physid1 == 0xffff) ||
-	    (physid2 == 0x0000) || (physid2 == 0xffff)) {
-		EFX_ERR(efx, "no MDIO PHY present with ID %d\n",
-			efx->mdio.prtad);
-		rc = -EINVAL;
-		goto out;
+	if (efx->phy_op->test_alive) {
+		rc = efx->phy_op->test_alive(efx);
+		tests->phy_alive = rc ? -1 : 1;
 	}
 
-	if (EFX_IS10G(efx)) {
-		rc = efx_mdio_check_mmds(efx, efx->mdio.mmds, 0);
-		if (rc)
-			goto out;
-	}
-
-out:
-	mutex_unlock(&efx->mac_lock);
-	tests->mdio = rc ? -1 : 1;
 	return rc;
 }
 
@@ -258,7 +230,7 @@ static int efx_test_phy(struct efx_nic *efx, struct efx_self_tests *tests,
 		return 0;
 
 	mutex_lock(&efx->mac_lock);
-	rc = efx->phy_op->run_tests(efx, tests->phy, flags);
+	rc = efx->phy_op->run_tests(efx, tests->phy_ext, flags);
 	mutex_unlock(&efx->mac_lock);
 	return rc;
 }
@@ -684,7 +656,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	/* Online (i.e. non-disruptive) testing
 	 * This checks interrupt generation, event delivery and PHY presence. */
 
-	rc = efx_test_mdio(efx, tests);
+	rc = efx_test_phy_alive(efx, tests);
 	if (rc && !rc_test)
 		rc_test = rc;
 
diff --git a/drivers/net/sfc/selftest.h b/drivers/net/sfc/selftest.h
index f6feee04c96b..643bef72b99d 100644
--- a/drivers/net/sfc/selftest.h
+++ b/drivers/net/sfc/selftest.h
@@ -32,7 +32,7 @@ struct efx_loopback_self_tests {
  */
 struct efx_self_tests {
 	/* online tests */
-	int mdio;
+	int phy_alive;
 	int nvram;
 	int interrupt;
 	int eventq_dma[EFX_MAX_CHANNELS];
@@ -40,7 +40,7 @@ struct efx_self_tests {
 	int eventq_poll[EFX_MAX_CHANNELS];
 	/* offline tests */
 	int registers;
-	int phy[EFX_MAX_PHY_TESTS];
+	int phy_ext[EFX_MAX_PHY_TESTS];
 	struct efx_loopback_self_tests loopback[LOOPBACK_TEST_MAX + 1];
 };
 
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 3009c297c135..10db071bd837 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -842,6 +842,7 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sfx7101_set_npage_adv,
+	.test_alive	  = efx_mdio_test_alive,
 	.test_name	  = sfx7101_test_name,
 	.run_tests	  = sfx7101_run_tests,
 };
@@ -856,6 +857,7 @@ struct efx_phy_operations falcon_sft9001_phy_ops = {
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sft9001_set_npage_adv,
+	.test_alive	  = efx_mdio_test_alive,
 	.test_name	  = sft9001_test_name,
 	.run_tests	  = sft9001_run_tests,
 };
-- 
cgit v1.2.3


From 2e803407400efe592e5294993a5b1e8251f6dd49 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 3 Feb 2010 09:31:01 +0000
Subject: sfc: Implement NVRAM selftest for SFC9000 family

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/mcdi.c  | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/sfc/mcdi.h  |  1 +
 drivers/net/sfc/siena.c |  1 +
 3 files changed, 48 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index e9f0e5ee4519..86610db2cff5 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -896,6 +896,52 @@ fail:
 	return rc;
 }
 
+static int efx_mcdi_nvram_test(struct efx_nic *efx, unsigned int type)
+{
+	u8 inbuf[MC_CMD_NVRAM_TEST_IN_LEN];
+	u8 outbuf[MC_CMD_NVRAM_TEST_OUT_LEN];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_TEST_IN_TYPE, type);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_TEST, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), NULL);
+	if (rc)
+		return rc;
+
+	switch (MCDI_DWORD(outbuf, NVRAM_TEST_OUT_RESULT)) {
+	case MC_CMD_NVRAM_TEST_PASS:
+	case MC_CMD_NVRAM_TEST_NOTSUPP:
+		return 0;
+	default:
+		return -EIO;
+	}
+}
+
+int efx_mcdi_nvram_test_all(struct efx_nic *efx)
+{
+	u32 nvram_types;
+	unsigned int type;
+	int rc;
+
+	rc = efx_mcdi_nvram_types(efx, &nvram_types);
+	if (rc)
+		return rc;
+
+	type = 0;
+	while (nvram_types != 0) {
+		if (nvram_types & 1) {
+			rc = efx_mcdi_nvram_test(efx, type);
+			if (rc)
+				return rc;
+		}
+		type++;
+		nvram_types >>= 1;
+	}
+
+	return 0;
+}
+
 static int efx_mcdi_read_assertion(struct efx_nic *efx)
 {
 	u8 inbuf[MC_CMD_GET_ASSERTS_IN_LEN];
diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/sfc/mcdi.h
index 10ce98f4c0fb..f1f89ad4075a 100644
--- a/drivers/net/sfc/mcdi.h
+++ b/drivers/net/sfc/mcdi.h
@@ -116,6 +116,7 @@ extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
 				loff_t offset, size_t length);
 extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx,
 					unsigned int type);
+extern int efx_mcdi_nvram_test_all(struct efx_nic *efx);
 extern int efx_mcdi_handle_assertion(struct efx_nic *efx);
 extern void efx_mcdi_set_id_led(struct efx_nic *efx, enum efx_led_mode mode);
 extern int efx_mcdi_reset_port(struct efx_nic *efx);
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index f6a53895ff27..8e1311284718 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -583,6 +583,7 @@ struct efx_nic_type siena_a0_nic_type = {
 	.set_wol = siena_set_wol,
 	.resume_wol = siena_init_wol,
 	.test_registers = siena_test_registers,
+	.test_nvram = efx_mcdi_nvram_test_all,
 	.default_mac_ops = &efx_mcdi_mac_operations,
 
 	.revision = EFX_REV_SIENA_A0,
-- 
cgit v1.2.3


From c91f48d61c5b6fb36a6fc50de923db4db009b0dc Mon Sep 17 00:00:00 2001
From: Guido Barzini <gbarzini@solarflare.com>
Date: Wed, 3 Feb 2010 09:31:24 +0000
Subject: sfc: Survive ISR0=0 bug in the shared IRQ case

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/nic.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index db44224ed2ca..8d9696a38edf 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1384,6 +1384,15 @@ static irqreturn_t efx_legacy_interrupt(int irq, void *dev_id)
 		efx->last_irq_cpu = raw_smp_processor_id();
 		EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_DWORD_FMT "\n",
 			  irq, raw_smp_processor_id(), EFX_DWORD_VAL(reg));
+	} else if (EFX_WORKAROUND_15783(efx)) {
+		/* We can't return IRQ_HANDLED more than once on seeing ISR0=0
+		 * because this might be a shared interrupt, but we do need to
+		 * check the channel every time and preemptively rearm it if
+		 * it's idle. */
+		efx_for_each_channel(channel, efx) {
+			if (!channel->work_pending)
+				efx_nic_eventq_read_ack(channel);
+		}
 	}
 
 	return result;
-- 
cgit v1.2.3


From 4cddca5484e047fa77ce090bec96fbfb92a6eb19 Mon Sep 17 00:00:00 2001
From: Steve Hodgson <shodgson@solarflare.com>
Date: Wed, 3 Feb 2010 09:31:40 +0000
Subject: sfc: Add some missing bits to register self-test masks

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/falcon.c | 2 +-
 drivers/net/sfc/siena.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 1e7858511e35..f63a32cc9d24 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1008,7 +1008,7 @@ static int falcon_test_nvram(struct efx_nic *efx)
 
 static const struct efx_nic_register_test falcon_b0_register_tests[] = {
 	{ FR_AZ_ADR_REGION,
-	  EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) },
+	  EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) },
 	{ FR_AZ_RX_CFG,
 	  EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) },
 	{ FR_AZ_TX_CFG,
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 8e1311284718..1619fb5a64f5 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -134,7 +134,7 @@ void siena_remove_port(struct efx_nic *efx)
 
 static const struct efx_nic_register_test siena_register_tests[] = {
 	{ FR_AZ_ADR_REGION,
-	  EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) },
+	  EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) },
 	{ FR_CZ_USR_EV_CFG,
 	  EFX_OWORD32(0x000103FF, 0x00000000, 0x00000000, 0x00000000) },
 	{ FR_AZ_RX_CFG,
-- 
cgit v1.2.3


From 2291b20f4bee6a28087cf4f4b2b382a92063c8b5 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 3 Feb 2010 09:31:46 +0000
Subject: sfc: Remove declarations of nonexistent functions

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/efx.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index a615ac051530..7eff0a615cb3 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -79,8 +79,6 @@ extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok);
 
 /* Global */
 extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type);
-extern void efx_suspend(struct efx_nic *efx);
-extern void efx_resume(struct efx_nic *efx);
 extern void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs,
 				    int rx_usecs, bool rx_adaptive);
 extern int efx_request_power(struct efx_nic *efx, int mw, const char *name);
-- 
cgit v1.2.3


From 754c653a4e62bfa19b4e015c45198863c4211947 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 3 Feb 2010 09:31:57 +0000
Subject: sfc: Fix some incorrect or redundant comments

In particular, the comment about EVQ_RPTR_REG is based on inconsistent
preliminary hardware documentation, though the following code was
fixed long before release.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/ethtool.c    |  4 ++--
 drivers/net/sfc/falcon.c     |  2 +-
 drivers/net/sfc/net_driver.h | 12 ++++--------
 drivers/net/sfc/nic.c        |  4 ----
 4 files changed, 7 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 635c4205b4fb..d9f9c02a928e 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -196,7 +196,7 @@ int efx_ethtool_get_settings(struct net_device *net_dev,
 	efx->phy_op->get_settings(efx, ecmd);
 	mutex_unlock(&efx->mac_lock);
 
-	/* Falcon GMAC does not support 1000Mbps HD */
+	/* GMAC does not support 1000Mbps HD */
 	ecmd->supported &= ~SUPPORTED_1000baseT_Half;
 	/* Both MACs support pause frames (bidirectional and respond-only) */
 	ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
@@ -216,7 +216,7 @@ int efx_ethtool_set_settings(struct net_device *net_dev,
 	struct efx_nic *efx = netdev_priv(net_dev);
 	int rc;
 
-	/* Falcon GMAC does not support 1000Mbps HD */
+	/* GMAC does not support 1000Mbps HD */
 	if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
 		EFX_LOG(efx, "rejecting unsupported 1000Mbps HD"
 			" setting\n");
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index f63a32cc9d24..1b8d83657aaa 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1730,7 +1730,7 @@ static int falcon_set_wol(struct efx_nic *efx, u32 type)
 
 /**************************************************************************
  *
- * Revision-dependent attributes used by efx.c
+ * Revision-dependent attributes used by efx.c and nic.c
  *
  **************************************************************************
  */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 8f951e4f15be..ac77a252c7e2 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -101,9 +101,6 @@ do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
  * Special buffers are used for the event queues and the TX and RX
  * descriptor queues for each channel.  They are *not* used for the
  * actual transmit and receive buffers.
- *
- * Note that for Falcon, TX and RX descriptor queues live in host memory.
- * Allocation and freeing procedures must take this into account.
  */
 struct efx_special_buffer {
 	void *addr;
@@ -300,7 +297,7 @@ struct efx_rx_queue {
  * @dma_addr: DMA base address of the buffer
  * @len: Buffer length, in bytes
  *
- * Falcon uses these buffers for its interrupt status registers and
+ * The NIC uses these buffers for its interrupt status registers and
  * MAC stats dumps.
  */
 struct efx_buffer {
@@ -674,7 +671,7 @@ union efx_multicast_hash {
  * @irq_status: Interrupt status buffer
  * @last_irq_cpu: Last CPU to handle interrupt.
  *	This register is written with the SMP processor ID whenever an
- *	interrupt is handled.  It is used by falcon_test_interrupt()
+ *	interrupt is handled.  It is used by efx_nic_test_interrupt()
  *	to verify that an interrupt has occurred.
  * @spi_flash: SPI flash device
  *	This field will be %NULL if no flash device is present (or for Siena).
@@ -723,8 +720,7 @@ union efx_multicast_hash {
  * @loopback_modes: Supported loopback mode bitmask
  * @loopback_selftest: Offline self-test private state
  *
- * The @priv field of the corresponding &struct net_device points to
- * this.
+ * This is stored in the private area of the &struct net_device.
  */
 struct efx_nic {
 	char name[IFNAMSIZ];
@@ -997,7 +993,7 @@ static inline void clear_bit_le(unsigned nr, unsigned char *addr)
  * that the net driver will program into the MAC as the maximum frame
  * length.
  *
- * The 10G MAC used in Falcon requires 8-byte alignment on the frame
+ * The 10G MAC requires 8-byte alignment on the frame
  * length, so we round up to the nearest 8.
  *
  * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index 8d9696a38edf..b06f8e348307 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -623,10 +623,6 @@ void efx_nic_remove_rx(struct efx_rx_queue *rx_queue)
  *
  * This writes the EVQ_RPTR_REG register for the specified channel's
  * event queue.
- *
- * Note that EVQ_RPTR_REG contains the index of the "last read" event,
- * whereas channel->eventq_read_ptr contains the index of the "next to
- * read" event.
  */
 void efx_nic_eventq_read_ack(struct efx_channel *channel)
 {
-- 
cgit v1.2.3


From a4b97f2054af2e411c414ed4cb5e1d0dbfd24a47 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Wed, 3 Feb 2010 09:32:06 +0000
Subject: sfc: Do not include unneeded headers

Earlier refactoring has made these inclusions unnecessary.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/net_driver.h | 1 -
 drivers/net/sfc/selftest.c   | 2 --
 2 files changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index ac77a252c7e2..cb018e272097 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -18,7 +18,6 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
-#include <linux/timer.h>
 #include <linux/mdio.h>
 #include <linux/list.h>
 #include <linux/pci.h>
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 8a5a7b6d042d..cf0139a7d9a4 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -24,8 +24,6 @@
 #include "nic.h"
 #include "selftest.h"
 #include "workarounds.h"
-#include "spi.h"
-#include "io.h"
 
 /*
  * Loopback test packet structure
-- 
cgit v1.2.3


From 41f3e0b1f524c47908e944a7e55f11c371ddddec Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 2 Feb 2010 04:16:20 +0000
Subject: netxen: fix tx timeout recovery for NX2031 chip

For NX2031, first try to scrub interrupt before requesting firmware
reset. Return statement was missing after scrubbbing interrupt.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 9f9d6081959b..5209095a8739 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1941,7 +1941,7 @@ static void netxen_tx_timeout_task(struct work_struct *work)
 		netif_wake_queue(adapter->netdev);
 
 		clear_bit(__NX_RESETTING, &adapter->state);
-
+		return;
 	} else {
 		clear_bit(__NX_RESETTING, &adapter->state);
 		if (!netxen_nic_reset_context(adapter)) {
-- 
cgit v1.2.3


From e15eec2805565c7e31dbe402215637012f1e4616 Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Tue, 2 Feb 2010 04:16:21 +0000
Subject: netxen: protect resource cleanup by rtnl lock

o context resources can be in used, while resource cleanup is in progress,
  during fw recover.
o Null pointer execption can occur in send_cmd_desc, if fw recovery
  module frees tx ring without rtnl lock.
o Same applies to ethtool register dump.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 5209095a8739..24279e6e55f5 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -2240,7 +2240,9 @@ netxen_detach_work(struct work_struct *work)
 
 	netxen_nic_down(adapter, netdev);
 
+	rtnl_lock();
 	netxen_nic_detach(adapter);
+	rtnl_unlock();
 
 	status = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
 
-- 
cgit v1.2.3


From e44d38e1b72a2aa7f5e7024c5da83a879355a1cc Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Wed, 3 Feb 2010 13:12:51 +0000
Subject: ixgbe: Fix ixgbe_tx_map error path

Commit e5a43549f7a58509a91b299a51337d386697b92c (ixgbe: remove
skb_dma_map/unmap calls from driver) looks to have introduced a bug in
ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards
through count until it becomes -1 and return that.

The caller of ixgbe_tx_map expects 0 on error, so return that instead.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b5f64ad67975..37e2af0a6145 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5179,7 +5179,7 @@ dma_error:
 		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
 	}
 
-	return count;
+	return 0;
 }
 
 static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
-- 
cgit v1.2.3


From fdd3d631cddad20ad9d3e1eb7dbf26825a8a121f Mon Sep 17 00:00:00 2001
From: Krishna Kumar <krkumar2@in.ibm.com>
Date: Wed, 3 Feb 2010 13:13:10 +0000
Subject: ixgbe: Fix return of invalid txq

a developer had complained of getting lots of warnings:

"eth16 selects TX queue 98, but real number of TX queues is 64"

http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html

As there was no follow up on that bug, I am submitting this
patch assuming that the other return points will not return
invalid txq's, and also that this fixes the bug (not tested).

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 37e2af0a6145..7b7c8486c0bf 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5329,8 +5329,11 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	int txq = smp_processor_id();
 
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+		while (unlikely(txq >= dev->real_num_tx_queues))
+			txq -= dev->real_num_tx_queues;
 		return txq;
+	}
 
 #ifdef IXGBE_FCOE
 	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
-- 
cgit v1.2.3


From 10eec95569513206877769ad9336591c08015cfe Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Wed, 3 Feb 2010 14:23:32 +0000
Subject: ixgbe: only process one ixgbe_watchdog_task at a time.

Processing multiple ixgbe_watchdog_task calls may cause
the link_up variable and IXGBE_FLAG_NEED_LINK_UPDATE flag
to be set incorrectly.  In the worse case this is causing
the netif_carrier_off to be called inappropriately which
results in an interface that can't be brought up.

Although schedule_work() will only schedule the task if
it is not already on the work queue the WORK_STRUCT_PENDING
bits are cleared just before calling the work function.
This allows WORK_STRUCT_PENDING to be cleared, the work
function to start and meanwhile schedule another task.

This patch adds a mutex to the watchdog task. This bug is
actualized by changing DCB settings or doing extended
cable pull or reset tests.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h      | 17 ++++++++---------
 drivers/net/ixgbe/ixgbe_main.c | 13 +++++++++----
 2 files changed, 17 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index e576fb4740bc..55a319e3a57a 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -341,15 +341,14 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_VMDQ_ENABLED                 (u32)(1 << 19)
 #define IXGBE_FLAG_FAN_FAIL_CAPABLE             (u32)(1 << 20)
 #define IXGBE_FLAG_NEED_LINK_UPDATE             (u32)(1 << 22)
-#define IXGBE_FLAG_IN_WATCHDOG_TASK             (u32)(1 << 23)
-#define IXGBE_FLAG_IN_SFP_LINK_TASK             (u32)(1 << 24)
-#define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 25)
-#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 26)
-#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
-#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 28)
-#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
-#define IXGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 30)
-#define IXGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 31)
+#define IXGBE_FLAG_IN_SFP_LINK_TASK             (u32)(1 << 23)
+#define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 24)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 25)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 26)
+#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 28)
+#define IXGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 29)
+#define IXGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 30)
 
 	u32 flags2;
 #define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index f098816d4199..1ec3cbdf8729 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4996,6 +4996,8 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
 	netif_tx_start_all_queues(adapter->netdev);
 }
 
+static DEFINE_MUTEX(ixgbe_watchdog_lock);
+
 /**
  * ixgbe_watchdog_task - worker thread to bring link up
  * @work: pointer to work_struct containing our data
@@ -5007,13 +5009,16 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 	                                             watchdog_task);
 	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 link_speed = adapter->link_speed;
-	bool link_up = adapter->link_up;
+	u32 link_speed;
+	bool link_up;
 	int i;
 	struct ixgbe_ring *tx_ring;
 	int some_tx_pending = 0;
 
-	adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
+	mutex_lock(&ixgbe_watchdog_lock);
+
+	link_up = adapter->link_up;
+	link_speed = adapter->link_speed;
 
 	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
 		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
@@ -5102,7 +5107,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 	}
 
 	ixgbe_update_stats(adapter);
-	adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
+	mutex_unlock(&ixgbe_watchdog_lock);
 }
 
 static int ixgbe_tso(struct ixgbe_adapter *adapter,
-- 
cgit v1.2.3


From b548192acaebcb05d6a87d1e94f19835b1a18a8b Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 3 Feb 2010 14:49:28 +0000
Subject: e1000: Report link status in ethtool when interface is down

With this change ethtool will correctly report link status when
the interface is down. Currently ethtool reports the link as not
detected when the interface is down.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000.h         |  1 +
 drivers/net/e1000/e1000_ethtool.c | 19 ++++++++++++++++++-
 drivers/net/e1000/e1000_main.c    |  2 +-
 3 files changed, 20 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index e8932db7ee77..9902b33b7160 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -349,6 +349,7 @@ extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern bool e1000_has_link(struct e1000_adapter *adapter);
 extern void e1000_power_up_phy(struct e1000_adapter *);
 extern void e1000_set_ethtool_ops(struct net_device *netdev);
 extern void e1000_check_options(struct e1000_adapter *adapter);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 13e9ece16889..c67e93117271 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -215,6 +215,23 @@ static int e1000_set_settings(struct net_device *netdev,
 	return 0;
 }
 
+static u32 e1000_get_link(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	/*
+	 * If the link is not reported up to netdev, interrupts are disabled,
+	 * and so the physical link state may have changed since we last
+	 * looked. Set get_link_status to make sure that the true link
+	 * state is interrogated, rather than pulling a cached and possibly
+	 * stale link state from the driver.
+	 */
+	if (!netif_carrier_ok(netdev))
+		adapter->hw.get_link_status = 1;
+
+	return e1000_has_link(adapter);
+}
+
 static void e1000_get_pauseparam(struct net_device *netdev,
 				 struct ethtool_pauseparam *pause)
 {
@@ -1892,7 +1909,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_msglevel           = e1000_get_msglevel,
 	.set_msglevel           = e1000_set_msglevel,
 	.nway_reset             = e1000_nway_reset,
-	.get_link               = ethtool_op_get_link,
+	.get_link               = e1000_get_link,
 	.get_eeprom_len         = e1000_get_eeprom_len,
 	.get_eeprom             = e1000_get_eeprom,
 	.set_eeprom             = e1000_set_eeprom,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b608528f26fc..4ff50d6fe5e4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2246,7 +2246,7 @@ static void e1000_82547_tx_fifo_stall(unsigned long data)
 	}
 }
 
-static bool e1000_has_link(struct e1000_adapter *adapter)
+bool e1000_has_link(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	bool link_active = false;
-- 
cgit v1.2.3


From dbb5aaebc44ce7f64b12904c58fbc1dd487982a7 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 3 Feb 2010 14:49:48 +0000
Subject: e1000: call pci_save_state after pci_restore_state

This patch adds a call to pci_save_state() immediately after
the call to pci_restore_state(). Due to a change in the behavior
of pci_restore_state() it is necessary to call pci_save_state()
to keep the state_saved flag. This patch is based on a similar
patch for ixgbe.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4ff50d6fe5e4..3b14dd718ab4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -847,6 +847,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		goto err_pci_reg;
 
 	pci_set_master(pdev);
+	err = pci_save_state(pdev);
+	if (err)
+		goto err_alloc_etherdev;
 
 	err = -ENOMEM;
 	netdev = alloc_etherdev(sizeof(struct e1000_adapter));
@@ -4596,6 +4599,7 @@ static int e1000_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
+	pci_save_state(pdev);
 
 	if (adapter->need_ioport)
 		err = pci_enable_device(pdev);
-- 
cgit v1.2.3


From 1a6c14a2c7c313c584f26730e67f062f474bb744 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Wed, 3 Feb 2010 14:18:50 +0000
Subject: ixgbe: Allocate driver resources per NUMA node

The default policy for the current driver is to do all its memory
allocation on whatever processor is running insmod/modprobe.  This
is less than optimal.

This driver's default mode of operation will be to use each node for each
subsequent transmit/receive queue.  The most efficient allocation will be
to then have the interrupts bound in such a way as to match up the
interrupt of the queue to the cpu where its memory was allocated.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h      |  2 ++
 drivers/net/ixgbe/ixgbe_main.c | 37 ++++++++++++++++++++++++++++++++++---
 2 files changed, 36 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 55a319e3a57a..33b79e812b4d 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -399,6 +399,8 @@ struct ixgbe_adapter {
 	u32 wol;
 	u16 eeprom_version;
 
+	int node;
+
 	/* SR-IOV */
 	DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
 	unsigned int num_vfs;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 1ec3cbdf8729..87e1aa5ba788 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3946,7 +3946,11 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
 	}
 
 	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
-		q_vector = kzalloc(sizeof(struct ixgbe_q_vector), GFP_KERNEL);
+		q_vector = kzalloc_node(sizeof(struct ixgbe_q_vector),
+		                        GFP_KERNEL, adapter->node);
+		if (!q_vector)
+			q_vector = kzalloc(sizeof(struct ixgbe_q_vector),
+			                   GFP_KERNEL);
 		if (!q_vector)
 			goto err_out;
 		q_vector->adapter = adapter;
@@ -4246,6 +4250,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	/* enable rx csum by default */
 	adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
 
+	/* get assigned NUMA node */
+	adapter->node = dev_to_node(&pdev->dev);
+
 	set_bit(__IXGBE_DOWN, &adapter->state);
 
 	return 0;
@@ -4265,7 +4272,9 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 	int size;
 
 	size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
-	tx_ring->tx_buffer_info = vmalloc(size);
+	tx_ring->tx_buffer_info = vmalloc_node(size, adapter->node);
+	if (!tx_ring->tx_buffer_info)
+		tx_ring->tx_buffer_info = vmalloc(size);
 	if (!tx_ring->tx_buffer_info)
 		goto err;
 	memset(tx_ring->tx_buffer_info, 0, size);
@@ -4305,8 +4314,15 @@ err:
 static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 {
 	int i, err = 0;
+	int orig_node = adapter->node;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
 		err = ixgbe_setup_tx_resources(adapter, &adapter->tx_ring[i]);
 		if (!err)
 			continue;
@@ -4314,6 +4330,9 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 		break;
 	}
 
+	/* reset the node back to its starting value */
+	adapter->node = orig_node;
+
 	return err;
 }
 
@@ -4331,7 +4350,9 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
 	int size;
 
 	size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
-	rx_ring->rx_buffer_info = vmalloc(size);
+	rx_ring->rx_buffer_info = vmalloc_node(size, adapter->node);
+	if (!rx_ring->rx_buffer_info)
+		rx_ring->rx_buffer_info = vmalloc(size);
 	if (!rx_ring->rx_buffer_info) {
 		DPRINTK(PROBE, ERR,
 		        "vmalloc allocation failed for the rx desc ring\n");
@@ -4375,8 +4396,15 @@ alloc_failed:
 static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 {
 	int i, err = 0;
+	int orig_node = adapter->node;
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
 		err = ixgbe_setup_rx_resources(adapter, &adapter->rx_ring[i]);
 		if (!err)
 			continue;
@@ -4384,6 +4412,9 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 		break;
 	}
 
+	/* reset the node back to its starting value */
+	adapter->node = orig_node;
+
 	return err;
 }
 
-- 
cgit v1.2.3


From 4a0b9ca015bae64df7d97c9e0a1d33159b36e69f Mon Sep 17 00:00:00 2001
From: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Date: Wed, 3 Feb 2010 14:19:12 +0000
Subject: ixgbe: Make descriptor ring allocations NUMA-aware

This patch allocates the ring structures themselves on each
NUMA node along with the buffer_info structures.  This way we
don't allocate the entire ring memory on a single node in one
big block, thus reducing NUMA node memory crosstalk.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h         |   5 +-
 drivers/net/ixgbe/ixgbe_ethtool.c |  71 +++++-----
 drivers/net/ixgbe/ixgbe_fcoe.c    |   4 +-
 drivers/net/ixgbe/ixgbe_main.c    | 276 ++++++++++++++++++++------------------
 4 files changed, 189 insertions(+), 167 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 33b79e812b4d..bffbe0d52d33 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -175,6 +175,7 @@ struct ixgbe_ring {
 
 	struct ixgbe_queue_stats stats;
 	unsigned long reinit_state;
+	int numa_node;
 	u64 rsc_count;			/* stat for coalesced packets */
 	u64 rsc_flush;			/* stats for flushed packets */
 	u32 restart_queue;		/* track tx queue restarts */
@@ -293,7 +294,7 @@ struct ixgbe_adapter {
 	u16 eitr_high;
 
 	/* TX */
-	struct ixgbe_ring *tx_ring ____cacheline_aligned_in_smp; /* One per active queue */
+	struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
 	int num_tx_queues;
 	u32 tx_timeout_count;
 	bool detect_tx_hung;
@@ -302,7 +303,7 @@ struct ixgbe_adapter {
 	u64 lsc_int;
 
 	/* RX */
-	struct ixgbe_ring *rx_ring ____cacheline_aligned_in_smp; /* One per active queue */
+	struct ixgbe_ring *rx_ring[MAX_RX_QUEUES] ____cacheline_aligned_in_smp;
 	int num_rx_queues;
 	int num_rx_pools;		/* == num_rx_queues in 82598 */
 	int num_rx_queues_per_pool;	/* 1 if 82598, can be many if 82599 */
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 1525c86cbccf..07a9410c08d4 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -834,8 +834,8 @@ static void ixgbe_get_ringparam(struct net_device *netdev,
                                 struct ethtool_ringparam *ring)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	struct ixgbe_ring *tx_ring = adapter->tx_ring;
-	struct ixgbe_ring *rx_ring = adapter->rx_ring;
+	struct ixgbe_ring *tx_ring = adapter->tx_ring[0];
+	struct ixgbe_ring *rx_ring = adapter->rx_ring[0];
 
 	ring->rx_max_pending = IXGBE_MAX_RXD;
 	ring->tx_max_pending = IXGBE_MAX_TXD;
@@ -867,8 +867,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 	new_tx_count = min(new_tx_count, (u32)IXGBE_MAX_TXD);
 	new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
 
-	if ((new_tx_count == adapter->tx_ring->count) &&
-	    (new_rx_count == adapter->rx_ring->count)) {
+	if ((new_tx_count == adapter->tx_ring[0]->count) &&
+	    (new_rx_count == adapter->rx_ring[0]->count)) {
 		/* nothing to do */
 		return 0;
 	}
@@ -878,25 +878,24 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 
 	if (!netif_running(adapter->netdev)) {
 		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].count = new_tx_count;
+			adapter->tx_ring[i]->count = new_tx_count;
 		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].count = new_rx_count;
+			adapter->rx_ring[i]->count = new_rx_count;
 		adapter->tx_ring_count = new_tx_count;
 		adapter->rx_ring_count = new_rx_count;
-		goto err_setup;
+		goto clear_reset;
 	}
 
-	temp_tx_ring = kcalloc(adapter->num_tx_queues,
-	                       sizeof(struct ixgbe_ring), GFP_KERNEL);
+	temp_tx_ring = vmalloc(adapter->num_tx_queues * sizeof(struct ixgbe_ring));
 	if (!temp_tx_ring) {
 		err = -ENOMEM;
-		goto err_setup;
+		goto clear_reset;
 	}
 
 	if (new_tx_count != adapter->tx_ring_count) {
-		memcpy(temp_tx_ring, adapter->tx_ring,
-		       adapter->num_tx_queues * sizeof(struct ixgbe_ring));
 		for (i = 0; i < adapter->num_tx_queues; i++) {
+			memcpy(&temp_tx_ring[i], adapter->tx_ring[i],
+			       sizeof(struct ixgbe_ring));
 			temp_tx_ring[i].count = new_tx_count;
 			err = ixgbe_setup_tx_resources(adapter,
 			                               &temp_tx_ring[i]);
@@ -904,28 +903,24 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 				while (i) {
 					i--;
 					ixgbe_free_tx_resources(adapter,
-					                        &temp_tx_ring[i]);
+					                      &temp_tx_ring[i]);
 				}
-				goto err_setup;
+				goto clear_reset;
 			}
 		}
 		need_update = true;
 	}
 
-	temp_rx_ring = kcalloc(adapter->num_rx_queues,
-	                       sizeof(struct ixgbe_ring), GFP_KERNEL);
-	if ((!temp_rx_ring) && (need_update)) {
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			ixgbe_free_tx_resources(adapter, &temp_tx_ring[i]);
-		kfree(temp_tx_ring);
+	temp_rx_ring = vmalloc(adapter->num_rx_queues * sizeof(struct ixgbe_ring));
+	if (!temp_rx_ring) {
 		err = -ENOMEM;
 		goto err_setup;
 	}
 
 	if (new_rx_count != adapter->rx_ring_count) {
-		memcpy(temp_rx_ring, adapter->rx_ring,
-		       adapter->num_rx_queues * sizeof(struct ixgbe_ring));
 		for (i = 0; i < adapter->num_rx_queues; i++) {
+			memcpy(&temp_rx_ring[i], adapter->rx_ring[i],
+			       sizeof(struct ixgbe_ring));
 			temp_rx_ring[i].count = new_rx_count;
 			err = ixgbe_setup_rx_resources(adapter,
 			                               &temp_rx_ring[i]);
@@ -947,22 +942,32 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 
 		/* tx */
 		if (new_tx_count != adapter->tx_ring_count) {
-			kfree(adapter->tx_ring);
-			adapter->tx_ring = temp_tx_ring;
-			temp_tx_ring = NULL;
+			for (i = 0; i < adapter->num_tx_queues; i++) {
+				ixgbe_free_tx_resources(adapter,
+				                        adapter->tx_ring[i]);
+				memcpy(adapter->tx_ring[i], &temp_tx_ring[i],
+				       sizeof(struct ixgbe_ring));
+			}
 			adapter->tx_ring_count = new_tx_count;
 		}
 
 		/* rx */
 		if (new_rx_count != adapter->rx_ring_count) {
-			kfree(adapter->rx_ring);
-			adapter->rx_ring = temp_rx_ring;
-			temp_rx_ring = NULL;
+			for (i = 0; i < adapter->num_rx_queues; i++) {
+				ixgbe_free_rx_resources(adapter,
+				                        adapter->rx_ring[i]);
+				memcpy(adapter->rx_ring[i], &temp_rx_ring[i],
+				       sizeof(struct ixgbe_ring));
+			}
 			adapter->rx_ring_count = new_rx_count;
 		}
 		ixgbe_up(adapter);
 	}
+
+	vfree(temp_rx_ring);
 err_setup:
+	vfree(temp_tx_ring);
+clear_reset:
 	clear_bit(__IXGBE_RESETTING, &adapter->state);
 	return err;
 }
@@ -1007,13 +1012,13 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
 		           sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
 	for (j = 0; j < adapter->num_tx_queues; j++) {
-		queue_stat = (u64 *)&adapter->tx_ring[j].stats;
+		queue_stat = (u64 *)&adapter->tx_ring[j]->stats;
 		for (k = 0; k < stat_count; k++)
 			data[i + k] = queue_stat[k];
 		i += k;
 	}
 	for (j = 0; j < adapter->num_rx_queues; j++) {
-		queue_stat = (u64 *)&adapter->rx_ring[j].stats;
+		queue_stat = (u64 *)&adapter->rx_ring[j]->stats;
 		for (k = 0; k < stat_count; k++)
 			data[i + k] = queue_stat[k];
 		i += k;
@@ -1627,7 +1632,7 @@ static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
 	reg_data |= IXGBE_RXDCTL_ENABLE;
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(0), reg_data);
 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		int j = adapter->rx_ring[0].reg_idx;
+		int j = adapter->rx_ring[0]->reg_idx;
 		u32 k;
 		for (k = 0; k < 10; k++) {
 			if (IXGBE_READ_REG(&adapter->hw,
@@ -2011,7 +2016,7 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-	ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit;
+	ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0]->work_limit;
 
 	/* only valid if in constant ITR mode */
 	switch (adapter->rx_itr_setting) {
@@ -2064,7 +2069,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		return -EINVAL;
 
 	if (ec->tx_max_coalesced_frames_irq)
-		adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq;
+		adapter->tx_ring[0]->work_limit = ec->tx_max_coalesced_frames_irq;
 
 	if (ec->rx_coalesce_usecs > 1) {
 		/* check the limits */
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index e9a20c88c155..4123dec0dfb7 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -525,7 +525,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 		for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
 			fcoe_i = f->mask + i % f->indices;
 			fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
-			fcoe_q = adapter->rx_ring[fcoe_i].reg_idx;
+			fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
 			IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
 		}
 		IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
@@ -533,7 +533,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 	} else  {
 		/* Use single rx queue for FCoE */
 		fcoe_i = f->mask;
-		fcoe_q = adapter->rx_ring[fcoe_i].reg_idx;
+		fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
 		IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
 		IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
 				IXGBE_ETQS_QUEUE_EN |
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 87e1aa5ba788..2a3c8315e357 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -494,7 +494,7 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
 {
 	u32 rxctrl;
 	int cpu = get_cpu();
-	int q = rx_ring - adapter->rx_ring;
+	int q = rx_ring->reg_idx;
 
 	if (rx_ring->cpu != cpu) {
 		rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q));
@@ -522,7 +522,7 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 {
 	u32 txctrl;
 	int cpu = get_cpu();
-	int q = tx_ring - adapter->tx_ring;
+	int q = tx_ring->reg_idx;
 	struct ixgbe_hw *hw = &adapter->hw;
 
 	if (tx_ring->cpu != cpu) {
@@ -556,12 +556,12 @@ static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		adapter->tx_ring[i].cpu = -1;
-		ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]);
+		adapter->tx_ring[i]->cpu = -1;
+		ixgbe_update_tx_dca(adapter, adapter->tx_ring[i]);
 	}
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		adapter->rx_ring[i].cpu = -1;
-		ixgbe_update_rx_dca(adapter, &adapter->rx_ring[i]);
+		adapter->rx_ring[i]->cpu = -1;
+		ixgbe_update_rx_dca(adapter, adapter->rx_ring[i]);
 	}
 }
 
@@ -1032,7 +1032,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 		                       adapter->num_rx_queues);
 
 		for (i = 0; i < q_vector->rxr_count; i++) {
-			j = adapter->rx_ring[r_idx].reg_idx;
+			j = adapter->rx_ring[r_idx]->reg_idx;
 			ixgbe_set_ivar(adapter, 0, j, v_idx);
 			r_idx = find_next_bit(q_vector->rxr_idx,
 			                      adapter->num_rx_queues,
@@ -1042,7 +1042,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 		                       adapter->num_tx_queues);
 
 		for (i = 0; i < q_vector->txr_count; i++) {
-			j = adapter->tx_ring[r_idx].reg_idx;
+			j = adapter->tx_ring[r_idx]->reg_idx;
 			ixgbe_set_ivar(adapter, 1, j, v_idx);
 			r_idx = find_next_bit(q_vector->txr_idx,
 			                      adapter->num_tx_queues,
@@ -1182,7 +1182,7 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
-		tx_ring = &(adapter->tx_ring[r_idx]);
+		tx_ring = adapter->tx_ring[r_idx];
 		ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
 		                           q_vector->tx_itr,
 		                           tx_ring->total_packets,
@@ -1197,7 +1197,7 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
-		rx_ring = &(adapter->rx_ring[r_idx]);
+		rx_ring = adapter->rx_ring[r_idx];
 		ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
 		                           q_vector->rx_itr,
 		                           rx_ring->total_packets,
@@ -1319,7 +1319,7 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 			netif_tx_stop_all_queues(netdev);
 			for (i = 0; i < adapter->num_tx_queues; i++) {
 				struct ixgbe_ring *tx_ring =
-				                           &adapter->tx_ring[i];
+				                            adapter->tx_ring[i];
 				if (test_and_clear_bit(__IXGBE_FDIR_INIT_DONE,
 				                       &tx_ring->reinit_state))
 					schedule_work(&adapter->fdir_reinit_task);
@@ -1378,7 +1378,7 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
-		tx_ring = &(adapter->tx_ring[r_idx]);
+		tx_ring = adapter->tx_ring[r_idx];
 		tx_ring->total_bytes = 0;
 		tx_ring->total_packets = 0;
 		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
@@ -1406,7 +1406,7 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0;  i < q_vector->rxr_count; i++) {
-		rx_ring = &(adapter->rx_ring[r_idx]);
+		rx_ring = adapter->rx_ring[r_idx];
 		rx_ring->total_bytes = 0;
 		rx_ring->total_packets = 0;
 		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
@@ -1436,7 +1436,7 @@ static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
-		ring = &(adapter->tx_ring[r_idx]);
+		ring = adapter->tx_ring[r_idx];
 		ring->total_bytes = 0;
 		ring->total_packets = 0;
 		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
@@ -1445,7 +1445,7 @@ static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
-		ring = &(adapter->rx_ring[r_idx]);
+		ring = adapter->rx_ring[r_idx];
 		ring->total_bytes = 0;
 		ring->total_packets = 0;
 		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
@@ -1476,7 +1476,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
 	long r_idx;
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	rx_ring = &(adapter->rx_ring[r_idx]);
+	rx_ring = adapter->rx_ring[r_idx];
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 		ixgbe_update_rx_dca(adapter, rx_ring);
@@ -1517,7 +1517,7 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
-		ring = &(adapter->tx_ring[r_idx]);
+		ring = adapter->tx_ring[r_idx];
 #ifdef CONFIG_IXGBE_DCA
 		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 			ixgbe_update_tx_dca(adapter, ring);
@@ -1533,7 +1533,7 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 	budget = max(budget, 1);
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
-		ring = &(adapter->rx_ring[r_idx]);
+		ring = adapter->rx_ring[r_idx];
 #ifdef CONFIG_IXGBE_DCA
 		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 			ixgbe_update_rx_dca(adapter, ring);
@@ -1544,7 +1544,7 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 	}
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	ring = &(adapter->rx_ring[r_idx]);
+	ring = adapter->rx_ring[r_idx];
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
@@ -1577,7 +1577,7 @@ static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
 	long r_idx;
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
-	tx_ring = &(adapter->tx_ring[r_idx]);
+	tx_ring = adapter->tx_ring[r_idx];
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 		ixgbe_update_tx_dca(adapter, tx_ring);
@@ -1762,8 +1762,8 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
 	u8 current_itr;
 	u32 new_itr = q_vector->eitr;
-	struct ixgbe_ring *rx_ring = &adapter->rx_ring[0];
-	struct ixgbe_ring *tx_ring = &adapter->tx_ring[0];
+	struct ixgbe_ring *rx_ring = adapter->rx_ring[0];
+	struct ixgbe_ring *tx_ring = adapter->tx_ring[0];
 
 	q_vector->tx_itr = ixgbe_update_itr(adapter, new_itr,
 	                                    q_vector->tx_itr,
@@ -1875,10 +1875,10 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 	ixgbe_check_fan_failure(adapter, eicr);
 
 	if (napi_schedule_prep(&(q_vector->napi))) {
-		adapter->tx_ring[0].total_packets = 0;
-		adapter->tx_ring[0].total_bytes = 0;
-		adapter->rx_ring[0].total_packets = 0;
-		adapter->rx_ring[0].total_bytes = 0;
+		adapter->tx_ring[0]->total_packets = 0;
+		adapter->tx_ring[0]->total_bytes = 0;
+		adapter->rx_ring[0]->total_packets = 0;
+		adapter->rx_ring[0]->total_bytes = 0;
 		/* would disable interrupts here but EIAM disabled it */
 		__napi_schedule(&(q_vector->napi));
 	}
@@ -2010,7 +2010,7 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
 
 	/* Setup the HW Tx Head and Tail descriptor pointers */
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct ixgbe_ring *ring = &adapter->tx_ring[i];
+		struct ixgbe_ring *ring = adapter->tx_ring[i];
 		j = ring->reg_idx;
 		tdba = ring->dma;
 		tdlen = ring->count * sizeof(union ixgbe_adv_tx_desc);
@@ -2020,8 +2020,8 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen);
 		IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0);
 		IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
-		adapter->tx_ring[i].head = IXGBE_TDH(j);
-		adapter->tx_ring[i].tail = IXGBE_TDT(j);
+		adapter->tx_ring[i]->head = IXGBE_TDH(j);
+		adapter->tx_ring[i]->tail = IXGBE_TDT(j);
 		/*
 		 * Disable Tx Head Writeback RO bit, since this hoses
 		 * bookkeeping if things aren't delivered in order.
@@ -2168,7 +2168,7 @@ static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index)
 	u32 rscctrl;
 	int rx_buf_len;
 
-	rx_ring = &adapter->rx_ring[index];
+	rx_ring = adapter->rx_ring[index];
 	j = rx_ring->reg_idx;
 	rx_buf_len = rx_ring->rx_buf_len;
 	rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
@@ -2266,7 +2266,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 #endif
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 
-	rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
+	rdlen = adapter->rx_ring[0]->count * sizeof(union ixgbe_adv_rx_desc);
 	/* disable receives while setting up the descriptors */
 	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
@@ -2276,7 +2276,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	 * the Base and Length of the Rx Descriptor Ring
 	 */
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		rx_ring = &adapter->rx_ring[i];
+		rx_ring = adapter->rx_ring[i];
 		rdba = rx_ring->dma;
 		j = rx_ring->reg_idx;
 		IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32)));
@@ -2483,7 +2483,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev,
 	} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			u32 ctrl;
-			j = adapter->rx_ring[i].reg_idx;
+			j = adapter->rx_ring[i]->reg_idx;
 			ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(j));
 			ctrl |= IXGBE_RXDCTL_VME;
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(j), ctrl);
@@ -2646,7 +2646,7 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 	ixgbe_dcb_hw_config(&adapter->hw, &adapter->dcb_cfg);
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		j = adapter->tx_ring[i].reg_idx;
+		j = adapter->tx_ring[i]->reg_idx;
 		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
 		/* PThresh workaround for Tx hang with DFP enabled. */
 		txdctl |= 32;
@@ -2663,7 +2663,7 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 		vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
 		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 		for (i = 0; i < adapter->num_rx_queues; i++) {
-			j = adapter->rx_ring[i].reg_idx;
+			j = adapter->rx_ring[i]->reg_idx;
 			vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
 			vlnctrl |= IXGBE_RXDCTL_VME;
 			IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
@@ -2703,7 +2703,7 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
 #endif /* IXGBE_FCOE */
 	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
 		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].atr_sample_rate =
+			adapter->tx_ring[i]->atr_sample_rate =
 			                               adapter->atr_sample_rate;
 		ixgbe_init_fdir_signature_82599(hw, adapter->fdir_pballoc);
 	} else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
@@ -2713,8 +2713,8 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
 	ixgbe_configure_tx(adapter);
 	ixgbe_configure_rx(adapter);
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		ixgbe_alloc_rx_buffers(adapter, &adapter->rx_ring[i],
-		                       (adapter->rx_ring[i].count - 1));
+		ixgbe_alloc_rx_buffers(adapter, adapter->rx_ring[i],
+		                       (adapter->rx_ring[i]->count - 1));
 }
 
 static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
@@ -2797,7 +2797,7 @@ link_cfg_out:
 static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 	                                      int rxr)
 {
-	int j = adapter->rx_ring[rxr].reg_idx;
+	int j = adapter->rx_ring[rxr]->reg_idx;
 	int k;
 
 	for (k = 0; k < IXGBE_MAX_RX_DESC_POLL; k++) {
@@ -2811,8 +2811,8 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 		DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d "
 		        "not set within the polling period\n", rxr);
 	}
-	ixgbe_release_rx_desc(&adapter->hw, &adapter->rx_ring[rxr],
-	                      (adapter->rx_ring[rxr].count - 1));
+	ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
+	                      (adapter->rx_ring[rxr]->count - 1));
 }
 
 static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
@@ -2899,7 +2899,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	}
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		j = adapter->tx_ring[i].reg_idx;
+		j = adapter->tx_ring[i]->reg_idx;
 		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
 		/* enable WTHRESH=8 descriptors, to encourage burst writeback */
 		txdctl |= (8 << 16);
@@ -2913,7 +2913,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
 	}
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		j = adapter->tx_ring[i].reg_idx;
+		j = adapter->tx_ring[i]->reg_idx;
 		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
 		txdctl |= IXGBE_TXDCTL_ENABLE;
 		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
@@ -2932,7 +2932,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	}
 
 	for (i = 0; i < num_rx_rings; i++) {
-		j = adapter->rx_ring[i].reg_idx;
+		j = adapter->rx_ring[i]->reg_idx;
 		rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
 		/* enable PTHRESH=32 descriptors (half the internal cache)
 		 * and HTHRESH=0 descriptors (to minimize latency on fetch),
@@ -3006,7 +3006,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
 		set_bit(__IXGBE_FDIR_INIT_DONE,
-		        &(adapter->tx_ring[i].reinit_state));
+		        &(adapter->tx_ring[i]->reinit_state));
 
 	/* enable transmits */
 	netif_tx_start_all_queues(netdev);
@@ -3177,7 +3177,7 @@ static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+		ixgbe_clean_rx_ring(adapter, adapter->rx_ring[i]);
 }
 
 /**
@@ -3189,7 +3189,7 @@ static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+		ixgbe_clean_tx_ring(adapter, adapter->tx_ring[i]);
 }
 
 void ixgbe_down(struct ixgbe_adapter *adapter)
@@ -3240,7 +3240,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	/* disable transmits in the hardware now that interrupts are off */
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		j = adapter->tx_ring[i].reg_idx;
+		j = adapter->tx_ring[i]->reg_idx;
 		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
 		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j),
 		                (txdctl & ~IXGBE_TXDCTL_ENABLE));
@@ -3280,13 +3280,13 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
-		ixgbe_update_tx_dca(adapter, adapter->tx_ring);
-		ixgbe_update_rx_dca(adapter, adapter->rx_ring);
+		ixgbe_update_tx_dca(adapter, adapter->tx_ring[0]);
+		ixgbe_update_rx_dca(adapter, adapter->rx_ring[0]);
 	}
 #endif
 
-	tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring);
-	ixgbe_clean_rx_irq(q_vector, adapter->rx_ring, &work_done, budget);
+	tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring[0]);
+	ixgbe_clean_rx_irq(q_vector, adapter->rx_ring[0], &work_done, budget);
 
 	if (!tx_clean_complete)
 		work_done = budget;
@@ -3574,9 +3574,9 @@ static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
 
 	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
 		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = i;
+			adapter->rx_ring[i]->reg_idx = i;
 		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = i;
+			adapter->tx_ring[i]->reg_idx = i;
 		ret = true;
 	} else {
 		ret = false;
@@ -3603,8 +3603,8 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
 		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
 			/* the number of queues is assumed to be symmetric */
 			for (i = 0; i < dcb_i; i++) {
-				adapter->rx_ring[i].reg_idx = i << 3;
-				adapter->tx_ring[i].reg_idx = i << 2;
+				adapter->rx_ring[i]->reg_idx = i << 3;
+				adapter->tx_ring[i]->reg_idx = i << 2;
 			}
 			ret = true;
 		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
@@ -3622,18 +3622,18 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
 				 * Rx TC0-TC7 are offset by 16 queues each
 				 */
 				for (i = 0; i < 3; i++) {
-					adapter->tx_ring[i].reg_idx = i << 5;
-					adapter->rx_ring[i].reg_idx = i << 4;
+					adapter->tx_ring[i]->reg_idx = i << 5;
+					adapter->rx_ring[i]->reg_idx = i << 4;
 				}
 				for ( ; i < 5; i++) {
-					adapter->tx_ring[i].reg_idx =
+					adapter->tx_ring[i]->reg_idx =
 					                         ((i + 2) << 4);
-					adapter->rx_ring[i].reg_idx = i << 4;
+					adapter->rx_ring[i]->reg_idx = i << 4;
 				}
 				for ( ; i < dcb_i; i++) {
-					adapter->tx_ring[i].reg_idx =
+					adapter->tx_ring[i]->reg_idx =
 					                         ((i + 8) << 3);
-					adapter->rx_ring[i].reg_idx = i << 4;
+					adapter->rx_ring[i]->reg_idx = i << 4;
 				}
 
 				ret = true;
@@ -3646,12 +3646,12 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
 				 *
 				 * Rx TC0-TC3 are offset by 32 queues each
 				 */
-				adapter->tx_ring[0].reg_idx = 0;
-				adapter->tx_ring[1].reg_idx = 64;
-				adapter->tx_ring[2].reg_idx = 96;
-				adapter->tx_ring[3].reg_idx = 112;
+				adapter->tx_ring[0]->reg_idx = 0;
+				adapter->tx_ring[1]->reg_idx = 64;
+				adapter->tx_ring[2]->reg_idx = 96;
+				adapter->tx_ring[3]->reg_idx = 112;
 				for (i = 0 ; i < dcb_i; i++)
-					adapter->rx_ring[i].reg_idx = i << 5;
+					adapter->rx_ring[i]->reg_idx = i << 5;
 
 				ret = true;
 			} else {
@@ -3684,9 +3684,9 @@ static bool inline ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
 	    ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
 	     (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))) {
 		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = i;
+			adapter->rx_ring[i]->reg_idx = i;
 		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = i;
+			adapter->tx_ring[i]->reg_idx = i;
 		ret = true;
 	}
 
@@ -3714,8 +3714,8 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
 
 			ixgbe_cache_ring_dcb(adapter);
 			/* find out queues in TC for FCoE */
-			fcoe_rx_i = adapter->rx_ring[fcoe->tc].reg_idx + 1;
-			fcoe_tx_i = adapter->tx_ring[fcoe->tc].reg_idx + 1;
+			fcoe_rx_i = adapter->rx_ring[fcoe->tc]->reg_idx + 1;
+			fcoe_tx_i = adapter->tx_ring[fcoe->tc]->reg_idx + 1;
 			/*
 			 * In 82599, the number of Tx queues for each traffic
 			 * class for both 8-TC and 4-TC modes are:
@@ -3746,8 +3746,8 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
 			fcoe_tx_i = f->mask;
 		}
 		for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
-			adapter->rx_ring[f->mask + i].reg_idx = fcoe_rx_i;
-			adapter->tx_ring[f->mask + i].reg_idx = fcoe_tx_i;
+			adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i;
+			adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i;
 		}
 		ret = true;
 	}
@@ -3765,8 +3765,8 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
  */
 static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
 {
-	adapter->rx_ring[0].reg_idx = adapter->num_vfs * 2;
-	adapter->tx_ring[0].reg_idx = adapter->num_vfs * 2;
+	adapter->rx_ring[0]->reg_idx = adapter->num_vfs * 2;
+	adapter->tx_ring[0]->reg_idx = adapter->num_vfs * 2;
 	if (adapter->num_vfs)
 		return true;
 	else
@@ -3787,8 +3787,8 @@ static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
 static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 {
 	/* start with default case */
-	adapter->rx_ring[0].reg_idx = 0;
-	adapter->tx_ring[0].reg_idx = 0;
+	adapter->rx_ring[0]->reg_idx = 0;
+	adapter->tx_ring[0]->reg_idx = 0;
 
 	if (ixgbe_cache_ring_sriov(adapter))
 		return;
@@ -3821,33 +3821,63 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
 {
 	int i;
-
-	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
-	                           sizeof(struct ixgbe_ring), GFP_KERNEL);
-	if (!adapter->tx_ring)
-		goto err_tx_ring_allocation;
-
-	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
-	                           sizeof(struct ixgbe_ring), GFP_KERNEL);
-	if (!adapter->rx_ring)
-		goto err_rx_ring_allocation;
+	int orig_node = adapter->node;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		adapter->tx_ring[i].count = adapter->tx_ring_count;
-		adapter->tx_ring[i].queue_index = i;
+		struct ixgbe_ring *ring = adapter->tx_ring[i];
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
+		ring = kzalloc_node(sizeof(struct ixgbe_ring), GFP_KERNEL,
+		                    adapter->node);
+		if (!ring)
+			ring = kzalloc(sizeof(struct ixgbe_ring), GFP_KERNEL);
+		if (!ring)
+			goto err_tx_ring_allocation;
+		ring->count = adapter->tx_ring_count;
+		ring->queue_index = i;
+		ring->numa_node = adapter->node;
+
+		adapter->tx_ring[i] = ring;
 	}
 
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		adapter->rx_ring[i].count = adapter->rx_ring_count;
-		adapter->rx_ring[i].queue_index = i;
+		struct ixgbe_ring *ring = adapter->rx_ring[i];
+		if (orig_node == -1) {
+			int cur_node = next_online_node(adapter->node);
+			if (cur_node == MAX_NUMNODES)
+				cur_node = first_online_node;
+			adapter->node = cur_node;
+		}
+		ring = kzalloc_node(sizeof(struct ixgbe_ring), GFP_KERNEL,
+		                    adapter->node);
+		if (!ring)
+			ring = kzalloc(sizeof(struct ixgbe_ring), GFP_KERNEL);
+		if (!ring)
+			goto err_rx_ring_allocation;
+		ring->count = adapter->rx_ring_count;
+		ring->queue_index = i;
+		ring->numa_node = adapter->node;
+
+		adapter->rx_ring[i] = ring;
 	}
 
+	/* Restore the adapter's original node */
+	adapter->node = orig_node;
+
 	ixgbe_cache_ring_register(adapter);
 
 	return 0;
 
 err_rx_ring_allocation:
-	kfree(adapter->tx_ring);
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		kfree(adapter->tx_ring[i]);
 err_tx_ring_allocation:
 	return -ENOMEM;
 }
@@ -4077,10 +4107,16 @@ err_set_interrupt:
  **/
 void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
 {
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
-	adapter->tx_ring = NULL;
-	adapter->rx_ring = NULL;
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		kfree(adapter->tx_ring[i]);
+		adapter->tx_ring[i] = NULL;
+	}
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		kfree(adapter->rx_ring[i]);
+		adapter->rx_ring[i] = NULL;
+	}
 
 	ixgbe_free_q_vectors(adapter);
 	ixgbe_reset_interrupt_capability(adapter);
@@ -4272,7 +4308,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 	int size;
 
 	size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
-	tx_ring->tx_buffer_info = vmalloc_node(size, adapter->node);
+	tx_ring->tx_buffer_info = vmalloc_node(size, tx_ring->numa_node);
 	if (!tx_ring->tx_buffer_info)
 		tx_ring->tx_buffer_info = vmalloc(size);
 	if (!tx_ring->tx_buffer_info)
@@ -4314,25 +4350,15 @@ err:
 static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 {
 	int i, err = 0;
-	int orig_node = adapter->node;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		if (orig_node == -1) {
-			int cur_node = next_online_node(adapter->node);
-			if (cur_node == MAX_NUMNODES)
-				cur_node = first_online_node;
-			adapter->node = cur_node;
-		}
-		err = ixgbe_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+		err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
 		if (!err)
 			continue;
 		DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i);
 		break;
 	}
 
-	/* reset the node back to its starting value */
-	adapter->node = orig_node;
-
 	return err;
 }
 
@@ -4396,25 +4422,15 @@ alloc_failed:
 static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 {
 	int i, err = 0;
-	int orig_node = adapter->node;
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		if (orig_node == -1) {
-			int cur_node = next_online_node(adapter->node);
-			if (cur_node == MAX_NUMNODES)
-				cur_node = first_online_node;
-			adapter->node = cur_node;
-		}
-		err = ixgbe_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+		err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
 		if (!err)
 			continue;
 		DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i);
 		break;
 	}
 
-	/* reset the node back to its starting value */
-	adapter->node = orig_node;
-
 	return err;
 }
 
@@ -4451,8 +4467,8 @@ static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		if (adapter->tx_ring[i].desc)
-			ixgbe_free_tx_resources(adapter, &adapter->tx_ring[i]);
+		if (adapter->tx_ring[i]->desc)
+			ixgbe_free_tx_resources(adapter, adapter->tx_ring[i]);
 }
 
 /**
@@ -4488,8 +4504,8 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		if (adapter->rx_ring[i].desc)
-			ixgbe_free_rx_resources(adapter, &adapter->rx_ring[i]);
+		if (adapter->rx_ring[i]->desc)
+			ixgbe_free_rx_resources(adapter, adapter->rx_ring[i]);
 }
 
 /**
@@ -4766,8 +4782,8 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 			adapter->hw_rx_no_dma_resources +=
 			                     IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
 		for (i = 0; i < adapter->num_rx_queues; i++) {
-			rsc_count += adapter->rx_ring[i].rsc_count;
-			rsc_flush += adapter->rx_ring[i].rsc_flush;
+			rsc_count += adapter->rx_ring[i]->rsc_count;
+			rsc_flush += adapter->rx_ring[i]->rsc_flush;
 		}
 		adapter->rsc_total_count = rsc_count;
 		adapter->rsc_total_flush = rsc_flush;
@@ -4775,11 +4791,11 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 
 	/* gather some stats to the adapter struct that are per queue */
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		restart_queue += adapter->tx_ring[i].restart_queue;
+		restart_queue += adapter->tx_ring[i]->restart_queue;
 	adapter->restart_queue = restart_queue;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		non_eop_descs += adapter->rx_ring[i].non_eop_descs;
+		non_eop_descs += adapter->rx_ring[i]->non_eop_descs;
 	adapter->non_eop_descs = non_eop_descs;
 
 	adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
@@ -5018,7 +5034,7 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
 	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
 		for (i = 0; i < adapter->num_tx_queues; i++)
 			set_bit(__IXGBE_FDIR_INIT_DONE,
-			        &(adapter->tx_ring[i].reinit_state));
+			        &(adapter->tx_ring[i]->reinit_state));
 	} else {
 		DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
 		        "ignored adding FDIR ATR filters \n");
@@ -5120,7 +5136,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 
 	if (!netif_carrier_ok(netdev)) {
 		for (i = 0; i < adapter->num_tx_queues; i++) {
-			tx_ring = &adapter->tx_ring[i];
+			tx_ring = adapter->tx_ring[i];
 			if (tx_ring->next_to_use != tx_ring->next_to_clean) {
 				some_tx_pending = 1;
 				break;
@@ -5622,7 +5638,7 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
 		}
 	}
 
-	tx_ring = &adapter->tx_ring[skb->queue_mapping];
+	tx_ring = adapter->tx_ring[skb->queue_mapping];
 
 	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
 	    (skb->protocol == htons(ETH_P_FCOE))) {
-- 
cgit v1.2.3


From a112fd4ce3ed965dfb8dc6791622cb4f25ba3619 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Wed, 3 Feb 2010 07:24:11 +0000
Subject: qlge: Move reset from eeh io_resume to slot_reset.

Issue asic reset and verify functionality before continuing to the
resume call.  This allows proper error code to be returned in the case
the asic does not recover.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 5be3ae2f5a16..87ec72064158 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4717,6 +4717,12 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	pci_set_master(pdev);
+
+	if (ql_adapter_reset(qdev)) {
+		QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
@@ -4726,8 +4732,6 @@ static void qlge_io_resume(struct pci_dev *pdev)
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	int err = 0;
 
-	if (ql_adapter_reset(qdev))
-		QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
 	if (netif_running(ndev)) {
 		err = qlge_open(ndev);
 		if (err) {
-- 
cgit v1.2.3


From 4bbd1a1903639f826215d76af74f4901efc34daa Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Wed, 3 Feb 2010 07:24:12 +0000
Subject: qlge: Add check for eeh failure when closing device.

Fix crash where resources are freed twice on an eeh recovery failure.
If eeh recovery fails we set a flag to indicate to close() that
resources have been freed.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      |  1 +
 drivers/net/qlge/qlge_main.c | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 9169c4cf413a..780a38731bcc 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2005,6 +2005,7 @@ enum {
 	QL_SELFTEST = 9,
 	QL_LB_LINK_UP = 10,
 	QL_FRC_COREDUMP = 11,
+	QL_EEH_FATAL = 12,
 };
 
 /* link_status bit definitions */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 87ec72064158..7e000295f359 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3929,6 +3929,16 @@ static int qlge_close(struct net_device *ndev)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 
+	/* If we hit pci_channel_io_perm_failure
+	 * failure condition, then we already
+	 * brought the adapter down.
+	 */
+	if (test_bit(QL_EEH_FATAL, &qdev->flags)) {
+		QPRINTK(qdev, DRV, ERR, "EEH fatal did unload.\n");
+		clear_bit(QL_EEH_FATAL, &qdev->flags);
+		return 0;
+	}
+
 	/*
 	 * Wait for device to recover from a reset.
 	 * (Rarely happens, but possible.)
@@ -4677,6 +4687,7 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
 					       enum pci_channel_state state)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
+	struct ql_adapter *qdev = netdev_priv(ndev);
 
 	switch (state) {
 	case pci_channel_io_normal:
@@ -4690,6 +4701,8 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
 	case pci_channel_io_perm_failure:
 		dev_err(&pdev->dev,
 			"%s: pci_channel_io_perm_failure.\n", __func__);
+		ql_eeh_close(ndev);
+		set_bit(QL_EEH_FATAL, &qdev->flags);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
@@ -4720,6 +4733,7 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
 
 	if (ql_adapter_reset(qdev)) {
 		QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
+		set_bit(QL_EEH_FATAL, &qdev->flags);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
-- 
cgit v1.2.3


From 8a83a00b0735190384a348156837918271034144 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 30 Jan 2010 12:23:03 +0000
Subject: net: maintain namespace isolation between vlan and real device

In the vlan and macvlan drivers, the start_xmit function forwards
data to the dev_queue_xmit function for another device, which may
potentially belong to a different namespace.

To make sure that classification stays within a single namespace,
this resets the potentially critical fields.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvlan.c     |  2 +-
 include/linux/netdevice.h |  9 +++++++++
 net/8021q/vlan_dev.c      |  2 +-
 net/core/dev.c            | 35 +++++++++++++++++++++++++++++++----
 4 files changed, 42 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index fa0dc514dbaf..d32e0bdfc5e9 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -269,7 +269,7 @@ static int macvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 xmit_world:
-	skb->dev = vlan->lowerdev;
+	skb_set_dev(skb, vlan->lowerdev);
 	return dev_queue_xmit(skb);
 }
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 93a32a5ca74f..622ba5aa93c4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1004,6 +1004,15 @@ static inline bool netdev_uses_dsa_tags(struct net_device *dev)
 	return 0;
 }
 
+#ifndef CONFIG_NET_NS
+static inline void skb_set_dev(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->dev = dev;
+}
+#else /* CONFIG_NET_NS */
+void skb_set_dev(struct sk_buff *skb, struct net_device *dev);
+#endif
+
 static inline bool netdev_uses_trailer_tags(struct net_device *dev)
 {
 #ifdef CONFIG_NET_DSA_TAG_TRAILER
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index a9e1f1785614..9e83272fc5b0 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -322,7 +322,7 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
 	}
 
 
-	skb->dev = vlan_dev_info(dev)->real_dev;
+	skb_set_dev(skb, vlan_dev_info(dev)->real_dev);
 	len = skb->len;
 	ret = dev_queue_xmit(skb);
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 2cba5c521e56..94c1eeed25e5 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1448,13 +1448,10 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
 	if (skb->len > (dev->mtu + dev->hard_header_len))
 		return NET_RX_DROP;
 
-	skb_dst_drop(skb);
+	skb_set_dev(skb, dev);
 	skb->tstamp.tv64 = 0;
 	skb->pkt_type = PACKET_HOST;
 	skb->protocol = eth_type_trans(skb, dev);
-	skb->mark = 0;
-	secpath_reset(skb);
-	nf_reset(skb);
 	return netif_rx(skb);
 }
 EXPORT_SYMBOL_GPL(dev_forward_skb);
@@ -1614,6 +1611,36 @@ static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb)
 	return false;
 }
 
+/**
+ * skb_dev_set -- assign a new device to a buffer
+ * @skb: buffer for the new device
+ * @dev: network device
+ *
+ * If an skb is owned by a device already, we have to reset
+ * all data private to the namespace a device belongs to
+ * before assigning it a new device.
+ */
+#ifdef CONFIG_NET_NS
+void skb_set_dev(struct sk_buff *skb, struct net_device *dev)
+{
+	skb_dst_drop(skb);
+	if (skb->dev && !net_eq(dev_net(skb->dev), dev_net(dev))) {
+		secpath_reset(skb);
+		nf_reset(skb);
+		skb_init_secmark(skb);
+		skb->mark = 0;
+		skb->priority = 0;
+		skb->nf_trace = 0;
+		skb->ipvs_property = 0;
+#ifdef CONFIG_NET_SCHED
+		skb->tc_index = 0;
+#endif
+	}
+	skb->dev = dev;
+}
+EXPORT_SYMBOL(skb_set_dev);
+#endif /* CONFIG_NET_NS */
+
 /*
  * Invalidate hardware checksum when packet is to be mangled, and
  * complete checksum manually on outgoing path.
-- 
cgit v1.2.3


From fc0663d6b5e6d8e9b57f872a644c0aafd82361b7 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 30 Jan 2010 12:23:40 +0000
Subject: macvlan: allow multiple driver backends

This makes it possible to hook into the macvlan driver
from another kernel module. In particular, the goal is
to extend it with the macvtap backend that provides
a tun/tap compatible interface directly on the macvlan
device.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvlan.c      | 113 ++++++++++++++++++++-------------------------
 include/linux/if_macvlan.h |  70 ++++++++++++++++++++++++++++
 2 files changed, 119 insertions(+), 64 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index d32e0bdfc5e9..40faa368b07a 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -39,31 +39,6 @@ struct macvlan_port {
 	struct list_head	vlans;
 };
 
-/**
- *	struct macvlan_rx_stats - MACVLAN percpu rx stats
- *	@rx_packets: number of received packets
- *	@rx_bytes: number of received bytes
- *	@multicast: number of received multicast packets
- *	@rx_errors: number of errors
- */
-struct macvlan_rx_stats {
-	unsigned long rx_packets;
-	unsigned long rx_bytes;
-	unsigned long multicast;
-	unsigned long rx_errors;
-};
-
-struct macvlan_dev {
-	struct net_device	*dev;
-	struct list_head	list;
-	struct hlist_node	hlist;
-	struct macvlan_port	*port;
-	struct net_device	*lowerdev;
-	struct macvlan_rx_stats *rx_stats;
-	enum macvlan_mode	mode;
-};
-
-
 static struct macvlan_dev *macvlan_hash_lookup(const struct macvlan_port *port,
 					       const unsigned char *addr)
 {
@@ -118,31 +93,17 @@ static int macvlan_addr_busy(const struct macvlan_port *port,
 	return 0;
 }
 
-static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
-				    unsigned int len, bool success,
-				    bool multicast)
-{
-	struct macvlan_rx_stats *rx_stats;
-
-	rx_stats = per_cpu_ptr(vlan->rx_stats, smp_processor_id());
-	if (likely(success)) {
-		rx_stats->rx_packets++;;
-		rx_stats->rx_bytes += len;
-		if (multicast)
-			rx_stats->multicast++;
-	} else {
-		rx_stats->rx_errors++;
-	}
-}
 
-static int macvlan_broadcast_one(struct sk_buff *skb, struct net_device *dev,
+static int macvlan_broadcast_one(struct sk_buff *skb,
+				 const struct macvlan_dev *vlan,
 				 const struct ethhdr *eth, bool local)
 {
+	struct net_device *dev = vlan->dev;
 	if (!skb)
 		return NET_RX_DROP;
 
 	if (local)
-		return dev_forward_skb(dev, skb);
+		return vlan->forward(dev, skb);
 
 	skb->dev = dev;
 	if (!compare_ether_addr_64bits(eth->h_dest,
@@ -151,7 +112,7 @@ static int macvlan_broadcast_one(struct sk_buff *skb, struct net_device *dev,
 	else
 		skb->pkt_type = PACKET_MULTICAST;
 
-	return netif_rx(skb);
+	return vlan->receive(skb);
 }
 
 static void macvlan_broadcast(struct sk_buff *skb,
@@ -175,7 +136,7 @@ static void macvlan_broadcast(struct sk_buff *skb,
 				continue;
 
 			nskb = skb_clone(skb, GFP_ATOMIC);
-			err = macvlan_broadcast_one(nskb, vlan->dev, eth,
+			err = macvlan_broadcast_one(nskb, vlan, eth,
 					 mode == MACVLAN_MODE_BRIDGE);
 			macvlan_count_rx(vlan, skb->len + ETH_HLEN,
 					 err == NET_RX_SUCCESS, 1);
@@ -238,7 +199,7 @@ static struct sk_buff *macvlan_handle_frame(struct sk_buff *skb)
 	skb->dev = dev;
 	skb->pkt_type = PACKET_HOST;
 
-	netif_rx(skb);
+	vlan->receive(skb);
 	return NULL;
 }
 
@@ -260,7 +221,7 @@ static int macvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev)
 		dest = macvlan_hash_lookup(port, eth->h_dest);
 		if (dest && dest->mode == MACVLAN_MODE_BRIDGE) {
 			unsigned int length = skb->len + ETH_HLEN;
-			int ret = dev_forward_skb(dest->dev, skb);
+			int ret = dest->forward(dest->dev, skb);
 			macvlan_count_rx(dest, length,
 					 ret == NET_RX_SUCCESS, 0);
 
@@ -273,8 +234,8 @@ xmit_world:
 	return dev_queue_xmit(skb);
 }
 
-static netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
-				      struct net_device *dev)
+netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
+			       struct net_device *dev)
 {
 	int i = skb_get_queue_mapping(skb);
 	struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
@@ -290,6 +251,7 @@ static netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(macvlan_start_xmit);
 
 static int macvlan_hard_header(struct sk_buff *skb, struct net_device *dev,
 			       unsigned short type, const void *daddr,
@@ -623,8 +585,11 @@ static int macvlan_get_tx_queues(struct net *net,
 	return 0;
 }
 
-static int macvlan_newlink(struct net *src_net, struct net_device *dev,
-			   struct nlattr *tb[], struct nlattr *data[])
+int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
+			   struct nlattr *tb[], struct nlattr *data[],
+			   int (*receive)(struct sk_buff *skb),
+			   int (*forward)(struct net_device *dev,
+					  struct sk_buff *skb))
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 	struct macvlan_port *port;
@@ -664,6 +629,8 @@ static int macvlan_newlink(struct net *src_net, struct net_device *dev,
 	vlan->lowerdev = lowerdev;
 	vlan->dev      = dev;
 	vlan->port     = port;
+	vlan->receive  = receive;
+	vlan->forward  = forward;
 
 	vlan->mode     = MACVLAN_MODE_VEPA;
 	if (data && data[IFLA_MACVLAN_MODE])
@@ -677,8 +644,17 @@ static int macvlan_newlink(struct net *src_net, struct net_device *dev,
 	netif_stacked_transfer_operstate(lowerdev, dev);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(macvlan_common_newlink);
 
-static void macvlan_dellink(struct net_device *dev, struct list_head *head)
+static int macvlan_newlink(struct net *src_net, struct net_device *dev,
+			   struct nlattr *tb[], struct nlattr *data[])
+{
+	return macvlan_common_newlink(src_net, dev, tb, data,
+				      netif_rx,
+				      dev_forward_skb);
+}
+
+void macvlan_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 	struct macvlan_port *port = vlan->port;
@@ -689,6 +665,7 @@ static void macvlan_dellink(struct net_device *dev, struct list_head *head)
 	if (list_empty(&port->vlans))
 		macvlan_port_destroy(port->dev);
 }
+EXPORT_SYMBOL_GPL(macvlan_dellink);
 
 static int macvlan_changelink(struct net_device *dev,
 		struct nlattr *tb[], struct nlattr *data[])
@@ -720,19 +697,27 @@ static const struct nla_policy macvlan_policy[IFLA_MACVLAN_MAX + 1] = {
 	[IFLA_MACVLAN_MODE] = { .type = NLA_U32 },
 };
 
-static struct rtnl_link_ops macvlan_link_ops __read_mostly = {
+int macvlan_link_register(struct rtnl_link_ops *ops)
+{
+	/* common fields */
+	ops->priv_size		= sizeof(struct macvlan_dev);
+	ops->get_tx_queues	= macvlan_get_tx_queues;
+	ops->setup		= macvlan_setup;
+	ops->validate		= macvlan_validate;
+	ops->maxtype		= IFLA_MACVLAN_MAX;
+	ops->policy		= macvlan_policy;
+	ops->changelink		= macvlan_changelink;
+	ops->get_size		= macvlan_get_size;
+	ops->fill_info		= macvlan_fill_info;
+
+	return rtnl_link_register(ops);
+};
+EXPORT_SYMBOL_GPL(macvlan_link_register);
+
+static struct rtnl_link_ops macvlan_link_ops = {
 	.kind		= "macvlan",
-	.priv_size	= sizeof(struct macvlan_dev),
-	.get_tx_queues  = macvlan_get_tx_queues,
-	.setup		= macvlan_setup,
-	.validate	= macvlan_validate,
 	.newlink	= macvlan_newlink,
 	.dellink	= macvlan_dellink,
-	.maxtype	= IFLA_MACVLAN_MAX,
-	.policy		= macvlan_policy,
-	.changelink	= macvlan_changelink,
-	.get_size	= macvlan_get_size,
-	.fill_info	= macvlan_fill_info,
 };
 
 static int macvlan_device_event(struct notifier_block *unused,
@@ -761,7 +746,7 @@ static int macvlan_device_event(struct notifier_block *unused,
 		break;
 	case NETDEV_UNREGISTER:
 		list_for_each_entry_safe(vlan, next, &port->vlans, list)
-			macvlan_dellink(vlan->dev, NULL);
+			vlan->dev->rtnl_link_ops->dellink(vlan->dev, NULL);
 		break;
 	}
 	return NOTIFY_DONE;
@@ -778,7 +763,7 @@ static int __init macvlan_init_module(void)
 	register_netdevice_notifier(&macvlan_notifier_block);
 	macvlan_handle_frame_hook = macvlan_handle_frame;
 
-	err = rtnl_link_register(&macvlan_link_ops);
+	err = macvlan_link_register(&macvlan_link_ops);
 	if (err < 0)
 		goto err1;
 	return 0;
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 5f200bac3749..9a11544bb0b1 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -1,6 +1,76 @@
 #ifndef _LINUX_IF_MACVLAN_H
 #define _LINUX_IF_MACVLAN_H
 
+#include <linux/if_link.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <net/netlink.h>
+
+struct macvlan_port;
+struct macvtap_queue;
+
+/**
+ *	struct macvlan_rx_stats - MACVLAN percpu rx stats
+ *	@rx_packets: number of received packets
+ *	@rx_bytes: number of received bytes
+ *	@multicast: number of received multicast packets
+ *	@rx_errors: number of errors
+ */
+struct macvlan_rx_stats {
+	unsigned long rx_packets;
+	unsigned long rx_bytes;
+	unsigned long multicast;
+	unsigned long rx_errors;
+};
+
+struct macvlan_dev {
+	struct net_device	*dev;
+	struct list_head	list;
+	struct hlist_node	hlist;
+	struct macvlan_port	*port;
+	struct net_device	*lowerdev;
+	struct macvlan_rx_stats *rx_stats;
+	enum macvlan_mode	mode;
+	int (*receive)(struct sk_buff *skb);
+	int (*forward)(struct net_device *dev, struct sk_buff *skb);
+};
+
+static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
+				    unsigned int len, bool success,
+				    bool multicast)
+{
+	struct macvlan_rx_stats *rx_stats;
+
+	rx_stats = per_cpu_ptr(vlan->rx_stats, smp_processor_id());
+	if (likely(success)) {
+		rx_stats->rx_packets++;;
+		rx_stats->rx_bytes += len;
+		if (multicast)
+			rx_stats->multicast++;
+	} else {
+		rx_stats->rx_errors++;
+	}
+}
+
+extern int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
+				  struct nlattr *tb[], struct nlattr *data[],
+				  int (*receive)(struct sk_buff *skb),
+				  int (*forward)(struct net_device *dev,
+						 struct sk_buff *skb));
+
+extern void macvlan_count_rx(const struct macvlan_dev *vlan,
+			     unsigned int len, bool success,
+			     bool multicast);
+
+extern void macvlan_dellink(struct net_device *dev, struct list_head *head);
+
+extern int macvlan_link_register(struct rtnl_link_ops *ops);
+
+extern netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
+				      struct net_device *dev);
+
+
 extern struct sk_buff *(*macvlan_handle_frame_hook)(struct sk_buff *);
 
 #endif /* _LINUX_IF_MACVLAN_H */
-- 
cgit v1.2.3


From 20d29d7a916a47bf533b5709437fe735b6b5b79e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 30 Jan 2010 12:24:26 +0000
Subject: net: macvtap driver

In order to use macvlan with qemu and other tools that require
a tap file descriptor, the macvtap driver adds a small backend
with a character device with the same interface as the tun
driver, with a minimum set of features.

Macvtap interfaces are created in the same way as macvlan
interfaces using ip link, but the netif is just used as a
handle for configuration and accounting, while the data
goes through the chardev. Each macvtap interface has its
own character device, simplifying permission management
significantly over the generic tun/tap driver.

Cc: Patrick McHardy <kaber@trash.net>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: David S. Miller" <davem@davemloft.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Or Gerlitz <ogerlitz@voltaire.com>
Cc: netdev@vger.kernel.org
Cc: bridge@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig        |  12 +
 drivers/net/Makefile       |   1 +
 drivers/net/macvtap.c      | 581 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/if_macvlan.h |   1 +
 4 files changed, 595 insertions(+)
 create mode 100644 drivers/net/macvtap.c

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb0e534418e3..411e20703110 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -90,6 +90,18 @@ config MACVLAN
 	  To compile this driver as a module, choose M here: the module
 	  will be called macvlan.
 
+config MACVTAP
+	tristate "MAC-VLAN based tap driver (EXPERIMENTAL)"
+	depends on MACVLAN
+	help
+	  This adds a specialized tap character device driver that is based
+	  on the MAC-VLAN network interface, called macvtap. A macvtap device
+	  can be added in the same way as a macvlan device, using 'type
+	  macvlan', and then be accessed through the tap user space interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macvtap.
+
 config EQUALIZER
 	tristate "EQL (serial line load balancing) support"
 	---help---
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0b763cbe9b1f..95958032cd31 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -169,6 +169,7 @@ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
 obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
+obj-$(CONFIG_MACVTAP) += macvtap.o
 obj-$(CONFIG_DE600) += de600.o
 obj-$(CONFIG_DE620) += de620.o
 obj-$(CONFIG_LANCE) += lance.o
diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
new file mode 100644
index 000000000000..ad1f6ef89308
--- /dev/null
+++ b/drivers/net/macvtap.c
@@ -0,0 +1,581 @@
+#include <linux/etherdevice.h>
+#include <linux/if_macvlan.h>
+#include <linux/interrupt.h>
+#include <linux/nsproxy.h>
+#include <linux/compat.h>
+#include <linux/if_tun.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/cache.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+
+#include <net/net_namespace.h>
+#include <net/rtnetlink.h>
+#include <net/sock.h>
+
+/*
+ * A macvtap queue is the central object of this driver, it connects
+ * an open character device to a macvlan interface. There can be
+ * multiple queues on one interface, which map back to queues
+ * implemented in hardware on the underlying device.
+ *
+ * macvtap_proto is used to allocate queues through the sock allocation
+ * mechanism.
+ *
+ * TODO: multiqueue support is currently not implemented, even though
+ * macvtap is basically prepared for that. We will need to add this
+ * here as well as in virtio-net and qemu to get line rate on 10gbit
+ * adapters from a guest.
+ */
+struct macvtap_queue {
+	struct sock sk;
+	struct socket sock;
+	struct macvlan_dev *vlan;
+	struct file *file;
+};
+
+static struct proto macvtap_proto = {
+	.name = "macvtap",
+	.owner = THIS_MODULE,
+	.obj_size = sizeof (struct macvtap_queue),
+};
+
+/*
+ * Minor number matches netdev->ifindex, so need a potentially
+ * large value. This also makes it possible to split the
+ * tap functionality out again in the future by offering it
+ * from other drivers besides macvtap. As long as every device
+ * only has one tap, the interface numbers assure that the
+ * device nodes are unique.
+ */
+static unsigned int macvtap_major;
+#define MACVTAP_NUM_DEVS 65536
+static struct class *macvtap_class;
+static struct cdev macvtap_cdev;
+
+/*
+ * RCU usage:
+ * The macvtap_queue is referenced both from the chardev struct file
+ * and from the struct macvlan_dev using rcu_read_lock.
+ *
+ * We never actually update the contents of a macvtap_queue atomically
+ * with RCU but it is used for race-free destruction of a queue when
+ * either the file or the macvlan_dev goes away. Pointers back to
+ * the dev and the file are implicitly valid as long as the queue
+ * exists.
+ *
+ * The callbacks from macvlan are always done with rcu_read_lock held
+ * already, while in the file_operations, we get it ourselves.
+ *
+ * When destroying a queue, we remove the pointers from the file and
+ * from the dev and then synchronize_rcu to make sure no thread is
+ * still using the queue. There may still be references to the struct
+ * sock inside of the queue from outbound SKBs, but these never
+ * reference back to the file or the dev. The data structure is freed
+ * through __sk_free when both our references and any pending SKBs
+ * are gone.
+ *
+ * macvtap_lock is only used to prevent multiple concurrent open()
+ * calls to assign a new vlan->tap pointer. It could be moved into
+ * the macvlan_dev itself but is extremely rarely used.
+ */
+static DEFINE_SPINLOCK(macvtap_lock);
+
+/*
+ * Choose the next free queue, for now there is only one
+ */
+static int macvtap_set_queue(struct net_device *dev, struct file *file,
+				struct macvtap_queue *q)
+{
+	struct macvlan_dev *vlan = netdev_priv(dev);
+	int err = -EBUSY;
+
+	spin_lock(&macvtap_lock);
+	if (rcu_dereference(vlan->tap))
+		goto out;
+
+	err = 0;
+	q->vlan = vlan;
+	rcu_assign_pointer(vlan->tap, q);
+
+	q->file = file;
+	rcu_assign_pointer(file->private_data, q);
+
+out:
+	spin_unlock(&macvtap_lock);
+	return err;
+}
+
+/*
+ * We must destroy each queue exactly once, when either
+ * the netdev or the file go away.
+ *
+ * Using the spinlock makes sure that we don't get
+ * to the queue again after destroying it.
+ *
+ * synchronize_rcu serializes with the packet flow
+ * that uses rcu_read_lock.
+ */
+static void macvtap_del_queue(struct macvtap_queue **qp)
+{
+	struct macvtap_queue *q;
+
+	spin_lock(&macvtap_lock);
+	q = rcu_dereference(*qp);
+	if (!q) {
+		spin_unlock(&macvtap_lock);
+		return;
+	}
+
+	rcu_assign_pointer(q->vlan->tap, NULL);
+	rcu_assign_pointer(q->file->private_data, NULL);
+	spin_unlock(&macvtap_lock);
+
+	synchronize_rcu();
+	sock_put(&q->sk);
+}
+
+/*
+ * Since we only support one queue, just dereference the pointer.
+ */
+static struct macvtap_queue *macvtap_get_queue(struct net_device *dev,
+					       struct sk_buff *skb)
+{
+	struct macvlan_dev *vlan = netdev_priv(dev);
+
+	return rcu_dereference(vlan->tap);
+}
+
+static void macvtap_del_queues(struct net_device *dev)
+{
+	struct macvlan_dev *vlan = netdev_priv(dev);
+	macvtap_del_queue(&vlan->tap);
+}
+
+static inline struct macvtap_queue *macvtap_file_get_queue(struct file *file)
+{
+	rcu_read_lock_bh();
+	return rcu_dereference(file->private_data);
+}
+
+static inline void macvtap_file_put_queue(void)
+{
+	rcu_read_unlock_bh();
+}
+
+/*
+ * Forward happens for data that gets sent from one macvlan
+ * endpoint to another one in bridge mode. We just take
+ * the skb and put it into the receive queue.
+ */
+static int macvtap_forward(struct net_device *dev, struct sk_buff *skb)
+{
+	struct macvtap_queue *q = macvtap_get_queue(dev, skb);
+	if (!q)
+		return -ENOLINK;
+
+	skb_queue_tail(&q->sk.sk_receive_queue, skb);
+	wake_up(q->sk.sk_sleep);
+	return 0;
+}
+
+/*
+ * Receive is for data from the external interface (lowerdev),
+ * in case of macvtap, we can treat that the same way as
+ * forward, which macvlan cannot.
+ */
+static int macvtap_receive(struct sk_buff *skb)
+{
+	skb_push(skb, ETH_HLEN);
+	return macvtap_forward(skb->dev, skb);
+}
+
+static int macvtap_newlink(struct net *src_net,
+			   struct net_device *dev,
+			   struct nlattr *tb[],
+			   struct nlattr *data[])
+{
+	struct device *classdev;
+	dev_t devt;
+	int err;
+
+	err = macvlan_common_newlink(src_net, dev, tb, data,
+				     macvtap_receive, macvtap_forward);
+	if (err)
+		goto out;
+
+	devt = MKDEV(MAJOR(macvtap_major), dev->ifindex);
+
+	classdev = device_create(macvtap_class, &dev->dev, devt,
+				 dev, "tap%d", dev->ifindex);
+	if (IS_ERR(classdev)) {
+		err = PTR_ERR(classdev);
+		macvtap_del_queues(dev);
+	}
+
+out:
+	return err;
+}
+
+static void macvtap_dellink(struct net_device *dev,
+			    struct list_head *head)
+{
+	device_destroy(macvtap_class,
+		       MKDEV(MAJOR(macvtap_major), dev->ifindex));
+
+	macvtap_del_queues(dev);
+	macvlan_dellink(dev, head);
+}
+
+static struct rtnl_link_ops macvtap_link_ops __read_mostly = {
+	.kind		= "macvtap",
+	.newlink	= macvtap_newlink,
+	.dellink	= macvtap_dellink,
+};
+
+
+static void macvtap_sock_write_space(struct sock *sk)
+{
+	if (!sock_writeable(sk) ||
+	    !test_and_clear_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags))
+		return;
+
+	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		wake_up_interruptible_sync(sk->sk_sleep);
+}
+
+static int macvtap_open(struct inode *inode, struct file *file)
+{
+	struct net *net = current->nsproxy->net_ns;
+	struct net_device *dev = dev_get_by_index(net, iminor(inode));
+	struct macvtap_queue *q;
+	int err;
+
+	err = -ENODEV;
+	if (!dev)
+		goto out;
+
+	/* check if this is a macvtap device */
+	err = -EINVAL;
+	if (dev->rtnl_link_ops != &macvtap_link_ops)
+		goto out;
+
+	err = -ENOMEM;
+	q = (struct macvtap_queue *)sk_alloc(net, AF_UNSPEC, GFP_KERNEL,
+					     &macvtap_proto);
+	if (!q)
+		goto out;
+
+	init_waitqueue_head(&q->sock.wait);
+	q->sock.type = SOCK_RAW;
+	q->sock.state = SS_CONNECTED;
+	sock_init_data(&q->sock, &q->sk);
+	q->sk.sk_allocation = GFP_ATOMIC; /* for now */
+	q->sk.sk_write_space = macvtap_sock_write_space;
+
+	err = macvtap_set_queue(dev, file, q);
+	if (err)
+		sock_put(&q->sk);
+
+out:
+	if (dev)
+		dev_put(dev);
+
+	return err;
+}
+
+static int macvtap_release(struct inode *inode, struct file *file)
+{
+	macvtap_del_queue((struct macvtap_queue **)&file->private_data);
+	return 0;
+}
+
+static unsigned int macvtap_poll(struct file *file, poll_table * wait)
+{
+	struct macvtap_queue *q = macvtap_file_get_queue(file);
+	unsigned int mask = POLLERR;
+
+	if (!q)
+		goto out;
+
+	mask = 0;
+	poll_wait(file, &q->sock.wait, wait);
+
+	if (!skb_queue_empty(&q->sk.sk_receive_queue))
+		mask |= POLLIN | POLLRDNORM;
+
+	if (sock_writeable(&q->sk) ||
+	    (!test_and_set_bit(SOCK_ASYNC_NOSPACE, &q->sock.flags) &&
+	     sock_writeable(&q->sk)))
+		mask |= POLLOUT | POLLWRNORM;
+
+out:
+	macvtap_file_put_queue();
+	return mask;
+}
+
+/* Get packet from user space buffer */
+static ssize_t macvtap_get_user(struct macvtap_queue *q,
+				const struct iovec *iv, size_t count,
+				int noblock)
+{
+	struct sk_buff *skb;
+	size_t len = count;
+	int err;
+
+	if (unlikely(len < ETH_HLEN))
+		return -EINVAL;
+
+	skb = sock_alloc_send_skb(&q->sk, NET_IP_ALIGN + len, noblock, &err);
+
+	if (!skb) {
+		macvlan_count_rx(q->vlan, 0, false, false);
+		return err;
+	}
+
+	skb_reserve(skb, NET_IP_ALIGN);
+	skb_put(skb, count);
+
+	if (skb_copy_datagram_from_iovec(skb, 0, iv, 0, len)) {
+		macvlan_count_rx(q->vlan, 0, false, false);
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+
+	skb_set_network_header(skb, ETH_HLEN);
+
+	macvlan_start_xmit(skb, q->vlan->dev);
+
+	return count;
+}
+
+static ssize_t macvtap_aio_write(struct kiocb *iocb, const struct iovec *iv,
+				 unsigned long count, loff_t pos)
+{
+	struct file *file = iocb->ki_filp;
+	ssize_t result = -ENOLINK;
+	struct macvtap_queue *q = macvtap_file_get_queue(file);
+
+	if (!q)
+		goto out;
+
+	result = macvtap_get_user(q, iv, iov_length(iv, count),
+			      file->f_flags & O_NONBLOCK);
+out:
+	macvtap_file_put_queue();
+	return result;
+}
+
+/* Put packet to the user space buffer */
+static ssize_t macvtap_put_user(struct macvtap_queue *q,
+				const struct sk_buff *skb,
+				const struct iovec *iv, int len)
+{
+	struct macvlan_dev *vlan = q->vlan;
+	int ret;
+
+	len = min_t(int, skb->len, len);
+
+	ret = skb_copy_datagram_const_iovec(skb, 0, iv, 0, len);
+
+	macvlan_count_rx(vlan, len, ret == 0, 0);
+
+	return ret ? ret : len;
+}
+
+static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
+				unsigned long count, loff_t pos)
+{
+	struct file *file = iocb->ki_filp;
+	struct macvtap_queue *q = macvtap_file_get_queue(file);
+
+	DECLARE_WAITQUEUE(wait, current);
+	struct sk_buff *skb;
+	ssize_t len, ret = 0;
+
+	if (!q) {
+		ret = -ENOLINK;
+		goto out;
+	}
+
+	len = iov_length(iv, count);
+	if (len < 0) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	add_wait_queue(q->sk.sk_sleep, &wait);
+	while (len) {
+		current->state = TASK_INTERRUPTIBLE;
+
+		/* Read frames from the queue */
+		skb = skb_dequeue(&q->sk.sk_receive_queue);
+		if (!skb) {
+			if (file->f_flags & O_NONBLOCK) {
+				ret = -EAGAIN;
+				break;
+			}
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+			/* Nothing to read, let's sleep */
+			schedule();
+			continue;
+		}
+		ret = macvtap_put_user(q, skb, iv, len);
+		kfree_skb(skb);
+		break;
+	}
+
+	current->state = TASK_RUNNING;
+	remove_wait_queue(q->sk.sk_sleep, &wait);
+
+out:
+	macvtap_file_put_queue();
+	return ret;
+}
+
+/*
+ * provide compatibility with generic tun/tap interface
+ */
+static long macvtap_ioctl(struct file *file, unsigned int cmd,
+			  unsigned long arg)
+{
+	struct macvtap_queue *q;
+	void __user *argp = (void __user *)arg;
+	struct ifreq __user *ifr = argp;
+	unsigned int __user *up = argp;
+	unsigned int u;
+	char devname[IFNAMSIZ];
+
+	switch (cmd) {
+	case TUNSETIFF:
+		/* ignore the name, just look at flags */
+		if (get_user(u, &ifr->ifr_flags))
+			return -EFAULT;
+		if (u != (IFF_TAP | IFF_NO_PI))
+			return -EINVAL;
+		return 0;
+
+	case TUNGETIFF:
+		q = macvtap_file_get_queue(file);
+		if (!q)
+			return -ENOLINK;
+		memcpy(devname, q->vlan->dev->name, sizeof(devname));
+		macvtap_file_put_queue();
+
+		if (copy_to_user(&ifr->ifr_name, q->vlan->dev->name, IFNAMSIZ) ||
+		    put_user((TUN_TAP_DEV | TUN_NO_PI), &ifr->ifr_flags))
+			return -EFAULT;
+		return 0;
+
+	case TUNGETFEATURES:
+		if (put_user((IFF_TAP | IFF_NO_PI), up))
+			return -EFAULT;
+		return 0;
+
+	case TUNSETSNDBUF:
+		if (get_user(u, up))
+			return -EFAULT;
+
+		q = macvtap_file_get_queue(file);
+		q->sk.sk_sndbuf = u;
+		macvtap_file_put_queue();
+		return 0;
+
+	case TUNSETOFFLOAD:
+		/* let the user check for future flags */
+		if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
+			  TUN_F_TSO_ECN | TUN_F_UFO))
+			return -EINVAL;
+
+		/* TODO: add support for these, so far we don't
+			 support any offload */
+		if (arg & (TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
+			 TUN_F_TSO_ECN | TUN_F_UFO))
+			return -EINVAL;
+
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+#ifdef CONFIG_COMPAT
+static long macvtap_compat_ioctl(struct file *file, unsigned int cmd,
+				 unsigned long arg)
+{
+	return macvtap_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static const struct file_operations macvtap_fops = {
+	.owner		= THIS_MODULE,
+	.open		= macvtap_open,
+	.release	= macvtap_release,
+	.aio_read	= macvtap_aio_read,
+	.aio_write	= macvtap_aio_write,
+	.poll		= macvtap_poll,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= macvtap_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= macvtap_compat_ioctl,
+#endif
+};
+
+static int macvtap_init(void)
+{
+	int err;
+
+	err = alloc_chrdev_region(&macvtap_major, 0,
+				MACVTAP_NUM_DEVS, "macvtap");
+	if (err)
+		goto out1;
+
+	cdev_init(&macvtap_cdev, &macvtap_fops);
+	err = cdev_add(&macvtap_cdev, macvtap_major, MACVTAP_NUM_DEVS);
+	if (err)
+		goto out2;
+
+	macvtap_class = class_create(THIS_MODULE, "macvtap");
+	if (IS_ERR(macvtap_class)) {
+		err = PTR_ERR(macvtap_class);
+		goto out3;
+	}
+
+	err = macvlan_link_register(&macvtap_link_ops);
+	if (err)
+		goto out4;
+
+	return 0;
+
+out4:
+	class_unregister(macvtap_class);
+out3:
+	cdev_del(&macvtap_cdev);
+out2:
+	unregister_chrdev_region(macvtap_major, MACVTAP_NUM_DEVS);
+out1:
+	return err;
+}
+module_init(macvtap_init);
+
+static void macvtap_exit(void)
+{
+	rtnl_link_unregister(&macvtap_link_ops);
+	class_unregister(macvtap_class);
+	cdev_del(&macvtap_cdev);
+	unregister_chrdev_region(macvtap_major, MACVTAP_NUM_DEVS);
+}
+module_exit(macvtap_exit);
+
+MODULE_ALIAS_RTNL_LINK("macvtap");
+MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 9a11544bb0b1..51f1512045e9 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -34,6 +34,7 @@ struct macvlan_dev {
 	enum macvlan_mode	mode;
 	int (*receive)(struct sk_buff *skb);
 	int (*forward)(struct net_device *dev, struct sk_buff *skb);
+	struct macvtap_queue	*tap;
 };
 
 static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
-- 
cgit v1.2.3


From 59b26c72914920fd12695033c5a099fb0bfae935 Mon Sep 17 00:00:00 2001
From: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Date: Mon, 1 Feb 2010 07:58:59 +0000
Subject: trivial: remove duplicated "from" in CAN USB EMS Kconfig help

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/usb/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index bbc78e0b8a15..97ff6febad63 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -5,6 +5,6 @@ config CAN_EMS_USB
 	tristate "EMS CPC-USB/ARM7 CAN/USB interface"
 	---help---
 	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
-	  from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+	  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 
 endmenu
-- 
cgit v1.2.3


From 235ecb1db09f481840569fd85eda62e70d03580c Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 1 Feb 2010 21:22:11 +0000
Subject: drivers/net/davinci_emac.c: Fix continuation line formats

String constants that are continued on subsequent lines with \
are not good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/davinci_emac.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 33c4fe26178c..faffad409985 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2672,8 +2672,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
 	priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
 	size = res->end - res->start + 1;
 	if (!request_mem_region(res->start, size, ndev->name)) {
-		dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() \
-					 for regs\n");
+		dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() for regs\n");
 		rc = -ENXIO;
 		goto probe_quit;
 	}
-- 
cgit v1.2.3


From 35cfabdc5e9b99e732899db8f36c63a215e105bc Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Mon, 1 Feb 2010 14:06:52 +0000
Subject: bonding: Remove net_device_stats from bonding struct

There is no need to maintain stats in the bonding structure.
Use the instance of net_device_stats in netdevice.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 2 +-
 drivers/net/bonding/bonding.h   | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6221936e957a..1787e3c86573 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3742,7 +3742,7 @@ static int bond_close(struct net_device *bond_dev)
 static struct net_device_stats *bond_get_stats(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
-	struct net_device_stats *stats = &bond->stats;
+	struct net_device_stats *stats = &bond_dev->stats;
 	struct net_device_stats local_stats;
 	struct slave *slave;
 	int i;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 558ec1352527..257a7a4dfce9 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -197,7 +197,6 @@ struct bonding {
 	s8	 send_grat_arp;
 	s8	 send_unsol_na;
 	s8	 setup_by_slave;
-	struct   net_device_stats stats;
 #ifdef CONFIG_PROC_FS
 	struct   proc_dir_entry *proc_entry;
 	char     proc_file_name[IFNAMSIZ];
-- 
cgit v1.2.3


From bf66f3736a945dd4e92d86427276c6eeab0a6c1d Mon Sep 17 00:00:00 2001
From: Christian Pellegrin <chripell@fsfe.org>
Date: Wed, 3 Feb 2010 07:39:54 +0000
Subject: can: mcp251x: Move to threaded interrupts instead of workqueues.

This patch addresses concerns about efficiency of handling incoming
packets. Handling of interrupts is done in a threaded interrupt handler
which has a smaller latency than workqueues. This change needed a rework
of the locking scheme that was much simplified. Some other (more or less
longstanding) bugs are fixed: utilization of just half of the RX
buffers, useless wait for interrupt on open, more reliable reset
sequence. The MERR interrupt is not used anymore: it overloads the CPU
in error-passive state without any additional information. One shot mode
is disabled because it's not clear if it can be handled efficiently on
this CAN controller.

Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/mcp251x.c | 421 ++++++++++++++++++++++------------------------
 1 file changed, 203 insertions(+), 218 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index bbe186b5a0ed..f8cc168ec76c 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -180,6 +180,14 @@
 #define RXBEID0_OFF 4
 #define RXBDLC_OFF  5
 #define RXBDAT_OFF  6
+#define RXFSIDH(n) ((n) * 4)
+#define RXFSIDL(n) ((n) * 4 + 1)
+#define RXFEID8(n) ((n) * 4 + 2)
+#define RXFEID0(n) ((n) * 4 + 3)
+#define RXMSIDH(n) ((n) * 4 + 0x20)
+#define RXMSIDL(n) ((n) * 4 + 0x21)
+#define RXMEID8(n) ((n) * 4 + 0x22)
+#define RXMEID0(n) ((n) * 4 + 0x23)
 
 #define GET_BYTE(val, byte)			\
 	(((val) >> ((byte) * 8)) & 0xff)
@@ -219,7 +227,8 @@ struct mcp251x_priv {
 	struct net_device *net;
 	struct spi_device *spi;
 
-	struct mutex spi_lock; /* SPI buffer lock */
+	struct mutex mcp_lock; /* SPI device lock */
+
 	u8 *spi_tx_buf;
 	u8 *spi_rx_buf;
 	dma_addr_t spi_tx_dma;
@@ -227,11 +236,11 @@ struct mcp251x_priv {
 
 	struct sk_buff *tx_skb;
 	int tx_len;
+
 	struct workqueue_struct *wq;
 	struct work_struct tx_work;
-	struct work_struct irq_work;
-	struct completion awake;
-	int wake;
+	struct work_struct restart_work;
+
 	int force_quit;
 	int after_suspend;
 #define AFTER_SUSPEND_UP 1
@@ -245,7 +254,8 @@ static void mcp251x_clean(struct net_device *net)
 {
 	struct mcp251x_priv *priv = netdev_priv(net);
 
-	net->stats.tx_errors++;
+	if (priv->tx_skb || priv->tx_len)
+		net->stats.tx_errors++;
 	if (priv->tx_skb)
 		dev_kfree_skb(priv->tx_skb);
 	if (priv->tx_len)
@@ -300,16 +310,12 @@ static u8 mcp251x_read_reg(struct spi_device *spi, uint8_t reg)
 	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	u8 val = 0;
 
-	mutex_lock(&priv->spi_lock);
-
 	priv->spi_tx_buf[0] = INSTRUCTION_READ;
 	priv->spi_tx_buf[1] = reg;
 
 	mcp251x_spi_trans(spi, 3);
 	val = priv->spi_rx_buf[2];
 
-	mutex_unlock(&priv->spi_lock);
-
 	return val;
 }
 
@@ -317,15 +323,11 @@ static void mcp251x_write_reg(struct spi_device *spi, u8 reg, uint8_t val)
 {
 	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 
-	mutex_lock(&priv->spi_lock);
-
 	priv->spi_tx_buf[0] = INSTRUCTION_WRITE;
 	priv->spi_tx_buf[1] = reg;
 	priv->spi_tx_buf[2] = val;
 
 	mcp251x_spi_trans(spi, 3);
-
-	mutex_unlock(&priv->spi_lock);
 }
 
 static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
@@ -333,16 +335,12 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
 {
 	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 
-	mutex_lock(&priv->spi_lock);
-
 	priv->spi_tx_buf[0] = INSTRUCTION_BIT_MODIFY;
 	priv->spi_tx_buf[1] = reg;
 	priv->spi_tx_buf[2] = mask;
 	priv->spi_tx_buf[3] = val;
 
 	mcp251x_spi_trans(spi, 4);
-
-	mutex_unlock(&priv->spi_lock);
 }
 
 static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
@@ -358,10 +356,8 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 			mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx) + i,
 					  buf[i]);
 	} else {
-		mutex_lock(&priv->spi_lock);
 		memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len);
 		mcp251x_spi_trans(spi, TXBDAT_OFF + len);
-		mutex_unlock(&priv->spi_lock);
 	}
 }
 
@@ -408,13 +404,9 @@ static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
 		for (; i < (RXBDAT_OFF + len); i++)
 			buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
 	} else {
-		mutex_lock(&priv->spi_lock);
-
 		priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
 		mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
 		memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
-
-		mutex_unlock(&priv->spi_lock);
 	}
 }
 
@@ -467,21 +459,6 @@ static void mcp251x_hw_sleep(struct spi_device *spi)
 	mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_SLEEP);
 }
 
-static void mcp251x_hw_wakeup(struct spi_device *spi)
-{
-	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
-
-	priv->wake = 1;
-
-	/* Can only wake up by generating a wake-up interrupt. */
-	mcp251x_write_bits(spi, CANINTE, CANINTE_WAKIE, CANINTE_WAKIE);
-	mcp251x_write_bits(spi, CANINTF, CANINTF_WAKIF, CANINTF_WAKIF);
-
-	/* Wait until the device is awake */
-	if (!wait_for_completion_timeout(&priv->awake, HZ))
-		dev_err(&spi->dev, "MCP251x didn't wake-up\n");
-}
-
 static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
 					   struct net_device *net)
 {
@@ -490,7 +467,6 @@ static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
 
 	if (priv->tx_skb || priv->tx_len) {
 		dev_warn(&spi->dev, "hard_xmit called while tx busy\n");
-		netif_stop_queue(net);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -511,12 +487,13 @@ static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode)
 
 	switch (mode) {
 	case CAN_MODE_START:
+		mcp251x_clean(net);
 		/* We have to delay work since SPI I/O may sleep */
 		priv->can.state = CAN_STATE_ERROR_ACTIVE;
 		priv->restart_tx = 1;
 		if (priv->can.restart_ms == 0)
 			priv->after_suspend = AFTER_SUSPEND_RESTART;
-		queue_work(priv->wq, &priv->irq_work);
+		queue_work(priv->wq, &priv->restart_work);
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -525,7 +502,7 @@ static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode)
 	return 0;
 }
 
-static void mcp251x_set_normal_mode(struct spi_device *spi)
+static int mcp251x_set_normal_mode(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	unsigned long timeout;
@@ -533,8 +510,7 @@ static void mcp251x_set_normal_mode(struct spi_device *spi)
 	/* Enable interrupts */
 	mcp251x_write_reg(spi, CANINTE,
 			  CANINTE_ERRIE | CANINTE_TX2IE | CANINTE_TX1IE |
-			  CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE |
-			  CANINTF_MERRF);
+			  CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE);
 
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
 		/* Put device into loopback mode */
@@ -544,9 +520,7 @@ static void mcp251x_set_normal_mode(struct spi_device *spi)
 		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LISTEN_ONLY);
 	} else {
 		/* Put device into normal mode */
-		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL |
-				  (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT ?
-				   CANCTRL_OSM : 0));
+		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
 
 		/* Wait for the device to enter normal mode */
 		timeout = jiffies + HZ;
@@ -555,11 +529,12 @@ static void mcp251x_set_normal_mode(struct spi_device *spi)
 			if (time_after(jiffies, timeout)) {
 				dev_err(&spi->dev, "MCP251x didn't"
 					" enter in normal mode\n");
-				return;
+				return -EBUSY;
 			}
 		}
 	}
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+	return 0;
 }
 
 static int mcp251x_do_set_bittiming(struct net_device *net)
@@ -590,33 +565,39 @@ static int mcp251x_setup(struct net_device *net, struct mcp251x_priv *priv,
 {
 	mcp251x_do_set_bittiming(net);
 
-	/* Enable RX0->RX1 buffer roll over and disable filters */
-	mcp251x_write_bits(spi, RXBCTRL(0),
-			   RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1,
-			   RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1);
-	mcp251x_write_bits(spi, RXBCTRL(1),
-			   RXBCTRL_RXM0 | RXBCTRL_RXM1,
-			   RXBCTRL_RXM0 | RXBCTRL_RXM1);
+	mcp251x_write_reg(spi, RXBCTRL(0),
+			  RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1);
+	mcp251x_write_reg(spi, RXBCTRL(1),
+			  RXBCTRL_RXM0 | RXBCTRL_RXM1);
 	return 0;
 }
 
-static void mcp251x_hw_reset(struct spi_device *spi)
+static int mcp251x_hw_reset(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	int ret;
-
-	mutex_lock(&priv->spi_lock);
+	unsigned long timeout;
 
 	priv->spi_tx_buf[0] = INSTRUCTION_RESET;
-
 	ret = spi_write(spi, priv->spi_tx_buf, 1);
-
-	mutex_unlock(&priv->spi_lock);
-
-	if (ret)
+	if (ret) {
 		dev_err(&spi->dev, "reset failed: ret = %d\n", ret);
+		return -EIO;
+	}
+
 	/* Wait for reset to finish */
+	timeout = jiffies + HZ;
 	mdelay(10);
+	while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK)
+	       != CANCTRL_REQOP_CONF) {
+		schedule();
+		if (time_after(jiffies, timeout)) {
+			dev_err(&spi->dev, "MCP251x didn't"
+				" enter in conf mode after reset\n");
+			return -EBUSY;
+		}
+	}
+	return 0;
 }
 
 static int mcp251x_hw_probe(struct spi_device *spi)
@@ -640,63 +621,17 @@ static int mcp251x_hw_probe(struct spi_device *spi)
 	return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
 }
 
-static irqreturn_t mcp251x_can_isr(int irq, void *dev_id)
-{
-	struct net_device *net = (struct net_device *)dev_id;
-	struct mcp251x_priv *priv = netdev_priv(net);
-
-	/* Schedule bottom half */
-	if (!work_pending(&priv->irq_work))
-		queue_work(priv->wq, &priv->irq_work);
-
-	return IRQ_HANDLED;
-}
-
-static int mcp251x_open(struct net_device *net)
+static void mcp251x_open_clean(struct net_device *net)
 {
 	struct mcp251x_priv *priv = netdev_priv(net);
 	struct spi_device *spi = priv->spi;
 	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
-	int ret;
-
-	ret = open_candev(net);
-	if (ret) {
-		dev_err(&spi->dev, "unable to set initial baudrate!\n");
-		return ret;
-	}
 
+	free_irq(spi->irq, priv);
+	mcp251x_hw_sleep(spi);
 	if (pdata->transceiver_enable)
-		pdata->transceiver_enable(1);
-
-	priv->force_quit = 0;
-	priv->tx_skb = NULL;
-	priv->tx_len = 0;
-
-	ret = request_irq(spi->irq, mcp251x_can_isr,
-			  IRQF_TRIGGER_FALLING, DEVICE_NAME, net);
-	if (ret) {
-		dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
-		if (pdata->transceiver_enable)
-			pdata->transceiver_enable(0);
-		close_candev(net);
-		return ret;
-	}
-
-	mcp251x_hw_wakeup(spi);
-	mcp251x_hw_reset(spi);
-	ret = mcp251x_setup(net, priv, spi);
-	if (ret) {
-		free_irq(spi->irq, net);
-		mcp251x_hw_sleep(spi);
-		if (pdata->transceiver_enable)
-			pdata->transceiver_enable(0);
-		close_candev(net);
-		return ret;
-	}
-	mcp251x_set_normal_mode(spi);
-	netif_wake_queue(net);
-
-	return 0;
+		pdata->transceiver_enable(0);
+	close_candev(net);
 }
 
 static int mcp251x_stop(struct net_device *net)
@@ -707,17 +642,19 @@ static int mcp251x_stop(struct net_device *net)
 
 	close_candev(net);
 
+	priv->force_quit = 1;
+	free_irq(spi->irq, priv);
+	destroy_workqueue(priv->wq);
+	priv->wq = NULL;
+
+	mutex_lock(&priv->mcp_lock);
+
 	/* Disable and clear pending interrupts */
 	mcp251x_write_reg(spi, CANINTE, 0x00);
 	mcp251x_write_reg(spi, CANINTF, 0x00);
 
-	priv->force_quit = 1;
-	free_irq(spi->irq, net);
-	flush_workqueue(priv->wq);
-
 	mcp251x_write_reg(spi, TXBCTRL(0), 0);
-	if (priv->tx_skb || priv->tx_len)
-		mcp251x_clean(net);
+	mcp251x_clean(net);
 
 	mcp251x_hw_sleep(spi);
 
@@ -726,9 +663,27 @@ static int mcp251x_stop(struct net_device *net)
 
 	priv->can.state = CAN_STATE_STOPPED;
 
+	mutex_unlock(&priv->mcp_lock);
+
 	return 0;
 }
 
+static void mcp251x_error_skb(struct net_device *net, int can_id, int data1)
+{
+	struct sk_buff *skb;
+	struct can_frame *frame;
+
+	skb = alloc_can_err_skb(net, &frame);
+	if (skb) {
+		frame->can_id = can_id;
+		frame->data[1] = data1;
+		netif_rx(skb);
+	} else {
+		dev_err(&net->dev,
+			"cannot allocate error skb\n");
+	}
+}
+
 static void mcp251x_tx_work_handler(struct work_struct *ws)
 {
 	struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
@@ -737,33 +692,32 @@ static void mcp251x_tx_work_handler(struct work_struct *ws)
 	struct net_device *net = priv->net;
 	struct can_frame *frame;
 
+	mutex_lock(&priv->mcp_lock);
 	if (priv->tx_skb) {
-		frame = (struct can_frame *)priv->tx_skb->data;
-
 		if (priv->can.state == CAN_STATE_BUS_OFF) {
 			mcp251x_clean(net);
-			netif_wake_queue(net);
-			return;
+		} else {
+			frame = (struct can_frame *)priv->tx_skb->data;
+
+			if (frame->can_dlc > CAN_FRAME_MAX_DATA_LEN)
+				frame->can_dlc = CAN_FRAME_MAX_DATA_LEN;
+			mcp251x_hw_tx(spi, frame, 0);
+			priv->tx_len = 1 + frame->can_dlc;
+			can_put_echo_skb(priv->tx_skb, net, 0);
+			priv->tx_skb = NULL;
 		}
-		if (frame->can_dlc > CAN_FRAME_MAX_DATA_LEN)
-			frame->can_dlc = CAN_FRAME_MAX_DATA_LEN;
-		mcp251x_hw_tx(spi, frame, 0);
-		priv->tx_len = 1 + frame->can_dlc;
-		can_put_echo_skb(priv->tx_skb, net, 0);
-		priv->tx_skb = NULL;
 	}
+	mutex_unlock(&priv->mcp_lock);
 }
 
-static void mcp251x_irq_work_handler(struct work_struct *ws)
+static void mcp251x_restart_work_handler(struct work_struct *ws)
 {
 	struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
-						 irq_work);
+						 restart_work);
 	struct spi_device *spi = priv->spi;
 	struct net_device *net = priv->net;
-	u8 txbnctrl;
-	u8 intf;
-	enum can_state new_state;
 
+	mutex_lock(&priv->mcp_lock);
 	if (priv->after_suspend) {
 		mdelay(10);
 		mcp251x_hw_reset(spi);
@@ -772,45 +726,54 @@ static void mcp251x_irq_work_handler(struct work_struct *ws)
 			mcp251x_set_normal_mode(spi);
 		} else if (priv->after_suspend & AFTER_SUSPEND_UP) {
 			netif_device_attach(net);
-			/* Clean since we lost tx buffer */
-			if (priv->tx_skb || priv->tx_len) {
-				mcp251x_clean(net);
-				netif_wake_queue(net);
-			}
+			mcp251x_clean(net);
 			mcp251x_set_normal_mode(spi);
+			netif_wake_queue(net);
 		} else {
 			mcp251x_hw_sleep(spi);
 		}
 		priv->after_suspend = 0;
+		priv->force_quit = 0;
 	}
 
-	if (priv->can.restart_ms == 0 && priv->can.state == CAN_STATE_BUS_OFF)
-		return;
+	if (priv->restart_tx) {
+		priv->restart_tx = 0;
+		mcp251x_write_reg(spi, TXBCTRL(0), 0);
+		mcp251x_clean(net);
+		netif_wake_queue(net);
+		mcp251x_error_skb(net, CAN_ERR_RESTARTED, 0);
+	}
+	mutex_unlock(&priv->mcp_lock);
+}
 
-	while (!priv->force_quit && !freezing(current)) {
-		u8 eflag = mcp251x_read_reg(spi, EFLG);
-		int can_id = 0, data1 = 0;
+static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
+{
+	struct mcp251x_priv *priv = dev_id;
+	struct spi_device *spi = priv->spi;
+	struct net_device *net = priv->net;
 
-		mcp251x_write_reg(spi, EFLG, 0x00);
+	mutex_lock(&priv->mcp_lock);
+	while (!priv->force_quit) {
+		enum can_state new_state;
+		u8 intf = mcp251x_read_reg(spi, CANINTF);
+		u8 eflag;
+		int can_id = 0, data1 = 0;
 
-		if (priv->restart_tx) {
-			priv->restart_tx = 0;
-			mcp251x_write_reg(spi, TXBCTRL(0), 0);
-			if (priv->tx_skb || priv->tx_len)
-				mcp251x_clean(net);
-			netif_wake_queue(net);
-			can_id |= CAN_ERR_RESTARTED;
+		if (intf & CANINTF_RX0IF) {
+			mcp251x_hw_rx(spi, 0);
+			/* Free one buffer ASAP */
+			mcp251x_write_bits(spi, CANINTF, intf & CANINTF_RX0IF,
+					   0x00);
 		}
 
-		if (priv->wake) {
-			/* Wait whilst the device wakes up */
-			mdelay(10);
-			priv->wake = 0;
-		}
+		if (intf & CANINTF_RX1IF)
+			mcp251x_hw_rx(spi, 1);
 
-		intf = mcp251x_read_reg(spi, CANINTF);
 		mcp251x_write_bits(spi, CANINTF, intf, 0x00);
 
+		eflag = mcp251x_read_reg(spi, EFLG);
+		mcp251x_write_reg(spi, EFLG, 0x00);
+
 		/* Update can state */
 		if (eflag & EFLG_TXBO) {
 			new_state = CAN_STATE_BUS_OFF;
@@ -851,59 +814,31 @@ static void mcp251x_irq_work_handler(struct work_struct *ws)
 		}
 		priv->can.state = new_state;
 
-		if ((intf & CANINTF_ERRIF) || (can_id & CAN_ERR_RESTARTED)) {
-			struct sk_buff *skb;
-			struct can_frame *frame;
-
-			/* Create error frame */
-			skb = alloc_can_err_skb(net, &frame);
-			if (skb) {
-				/* Set error frame flags based on bus state */
-				frame->can_id = can_id;
-				frame->data[1] = data1;
-
-				/* Update net stats for overflows */
-				if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) {
-					if (eflag & EFLG_RX0OVR)
-						net->stats.rx_over_errors++;
-					if (eflag & EFLG_RX1OVR)
-						net->stats.rx_over_errors++;
-					frame->can_id |= CAN_ERR_CRTL;
-					frame->data[1] |=
-						CAN_ERR_CRTL_RX_OVERFLOW;
-				}
-
-				netif_rx(skb);
-			} else {
-				dev_info(&spi->dev,
-					 "cannot allocate error skb\n");
+		if (intf & CANINTF_ERRIF) {
+			/* Handle overflow counters */
+			if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) {
+				if (eflag & EFLG_RX0OVR)
+					net->stats.rx_over_errors++;
+				if (eflag & EFLG_RX1OVR)
+					net->stats.rx_over_errors++;
+				can_id |= CAN_ERR_CRTL;
+				data1 |= CAN_ERR_CRTL_RX_OVERFLOW;
 			}
+			mcp251x_error_skb(net, can_id, data1);
 		}
 
 		if (priv->can.state == CAN_STATE_BUS_OFF) {
 			if (priv->can.restart_ms == 0) {
+				priv->force_quit = 1;
 				can_bus_off(net);
 				mcp251x_hw_sleep(spi);
-				return;
+				break;
 			}
 		}
 
 		if (intf == 0)
 			break;
 
-		if (intf & CANINTF_WAKIF)
-			complete(&priv->awake);
-
-		if (intf & CANINTF_MERRF) {
-			/* If there are pending Tx buffers, restart queue */
-			txbnctrl = mcp251x_read_reg(spi, TXBCTRL(0));
-			if (!(txbnctrl & TXBCTRL_TXREQ)) {
-				if (priv->tx_skb || priv->tx_len)
-					mcp251x_clean(net);
-				netif_wake_queue(net);
-			}
-		}
-
 		if (intf & (CANINTF_TX2IF | CANINTF_TX1IF | CANINTF_TX0IF)) {
 			net->stats.tx_packets++;
 			net->stats.tx_bytes += priv->tx_len - 1;
@@ -914,12 +849,66 @@ static void mcp251x_irq_work_handler(struct work_struct *ws)
 			netif_wake_queue(net);
 		}
 
-		if (intf & CANINTF_RX0IF)
-			mcp251x_hw_rx(spi, 0);
+	}
+	mutex_unlock(&priv->mcp_lock);
+	return IRQ_HANDLED;
+}
 
-		if (intf & CANINTF_RX1IF)
-			mcp251x_hw_rx(spi, 1);
+static int mcp251x_open(struct net_device *net)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+	struct spi_device *spi = priv->spi;
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	int ret;
+
+	ret = open_candev(net);
+	if (ret) {
+		dev_err(&spi->dev, "unable to set initial baudrate!\n");
+		return ret;
+	}
+
+	mutex_lock(&priv->mcp_lock);
+	if (pdata->transceiver_enable)
+		pdata->transceiver_enable(1);
+
+	priv->force_quit = 0;
+	priv->tx_skb = NULL;
+	priv->tx_len = 0;
+
+	ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist,
+			  IRQF_TRIGGER_FALLING, DEVICE_NAME, priv);
+	if (ret) {
+		dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
+		if (pdata->transceiver_enable)
+			pdata->transceiver_enable(0);
+		close_candev(net);
+		goto open_unlock;
+	}
+
+	priv->wq = create_freezeable_workqueue("mcp251x_wq");
+	INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
+	INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler);
+
+	ret = mcp251x_hw_reset(spi);
+	if (ret) {
+		mcp251x_open_clean(net);
+		goto open_unlock;
+	}
+	ret = mcp251x_setup(net, priv, spi);
+	if (ret) {
+		mcp251x_open_clean(net);
+		goto open_unlock;
 	}
+	ret = mcp251x_set_normal_mode(spi);
+	if (ret) {
+		mcp251x_open_clean(net);
+		goto open_unlock;
+	}
+	netif_wake_queue(net);
+
+open_unlock:
+	mutex_unlock(&priv->mcp_lock);
+	return ret;
 }
 
 static const struct net_device_ops mcp251x_netdev_ops = {
@@ -955,13 +944,11 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
 	priv->can.clock.freq = pdata->oscillator_frequency / 2;
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
 		CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
-	if (pdata->model == CAN_MCP251X_MCP2515)
-		priv->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
 	priv->net = net;
 	dev_set_drvdata(&spi->dev, priv);
 
 	priv->spi = spi;
-	mutex_init(&priv->spi_lock);
+	mutex_init(&priv->mcp_lock);
 
 	/* If requested, allocate DMA buffers */
 	if (mcp251x_enable_dma) {
@@ -1010,18 +997,12 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
 
 	SET_NETDEV_DEV(net, &spi->dev);
 
-	priv->wq = create_freezeable_workqueue("mcp251x_wq");
-
-	INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
-	INIT_WORK(&priv->irq_work, mcp251x_irq_work_handler);
-
-	init_completion(&priv->awake);
-
 	/* Configure the SPI bus */
 	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
 	spi_setup(spi);
 
+	/* Here is OK to not lock the MCP, no one knows about it yet */
 	if (!mcp251x_hw_probe(spi)) {
 		dev_info(&spi->dev, "Probe failed\n");
 		goto error_probe;
@@ -1064,10 +1045,6 @@ static int __devexit mcp251x_can_remove(struct spi_device *spi)
 	unregister_candev(net);
 	free_candev(net);
 
-	priv->force_quit = 1;
-	flush_workqueue(priv->wq);
-	destroy_workqueue(priv->wq);
-
 	if (mcp251x_enable_dma) {
 		dma_free_coherent(&spi->dev, PAGE_SIZE,
 				  priv->spi_tx_buf, priv->spi_tx_dma);
@@ -1089,6 +1066,12 @@ static int mcp251x_can_suspend(struct spi_device *spi, pm_message_t state)
 	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	struct net_device *net = priv->net;
 
+	priv->force_quit = 1;
+	disable_irq(spi->irq);
+	/*
+	 * Note: at this point neither IST nor workqueues are running.
+	 * open/stop cannot be called anyway so locking is not needed
+	 */
 	if (netif_running(net)) {
 		netif_device_detach(net);
 
@@ -1115,16 +1098,18 @@ static int mcp251x_can_resume(struct spi_device *spi)
 
 	if (priv->after_suspend & AFTER_SUSPEND_POWER) {
 		pdata->power_enable(1);
-		queue_work(priv->wq, &priv->irq_work);
+		queue_work(priv->wq, &priv->restart_work);
 	} else {
 		if (priv->after_suspend & AFTER_SUSPEND_UP) {
 			if (pdata->transceiver_enable)
 				pdata->transceiver_enable(1);
-			queue_work(priv->wq, &priv->irq_work);
+			queue_work(priv->wq, &priv->restart_work);
 		} else {
 			priv->after_suspend = 0;
 		}
 	}
+	priv->force_quit = 0;
+	enable_irq(spi->irq);
 	return 0;
 }
 #else
-- 
cgit v1.2.3


From 3fbd9187d004149fb8a98c9cb51ef9f4a4f66aca Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Mon, 1 Feb 2010 13:45:41 +0000
Subject: sky2: hand receive DMA mapping failures

If receive buffer mapping failed, then it was possible to get
stuck with unmapped receive buffer in DMA ring.

This would be an extremely rare condition because the driver had just
released the map for the last receive so it should be able to get
another map again (in soft-irq).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 61 +++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a6ddfc1a9cb2..72c92495a9b3 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1103,18 +1103,39 @@ static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
 	int i;
 
 	re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
-	if (unlikely(pci_dma_mapping_error(pdev, re->data_addr)))
-		return -EIO;
+	if (pci_dma_mapping_error(pdev, re->data_addr))
+		goto mapping_error;
 
 	pci_unmap_len_set(re, data_size, size);
 
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
-		re->frag_addr[i] = pci_map_page(pdev,
-						skb_shinfo(skb)->frags[i].page,
-						skb_shinfo(skb)->frags[i].page_offset,
-						skb_shinfo(skb)->frags[i].size,
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		re->frag_addr[i] = pci_map_page(pdev, frag->page,
+						frag->page_offset,
+						frag->size,
 						PCI_DMA_FROMDEVICE);
+
+		if (pci_dma_mapping_error(pdev, re->frag_addr[i]))
+			goto map_page_error;
+	}
 	return 0;
+
+map_page_error:
+	while (--i >= 0) {
+		pci_unmap_page(pdev, re->frag_addr[i],
+			       skb_shinfo(skb)->frags[i].size,
+			       PCI_DMA_FROMDEVICE);
+	}
+
+	pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size),
+			 PCI_DMA_FROMDEVICE);
+
+mapping_error:
+	if (net_ratelimit())
+		dev_warn(&pdev->dev, "%s: rx mapping error\n",
+			 skb->dev->name);
+	return -EIO;
 }
 
 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
@@ -2306,30 +2327,32 @@ static struct sk_buff *receive_new(struct sky2_port *sky2,
 				   struct rx_ring_info *re,
 				   unsigned int length)
 {
-	struct sk_buff *skb, *nskb;
+	struct sk_buff *skb;
+	struct rx_ring_info nre;
 	unsigned hdr_space = sky2->rx_data_size;
 
-	/* Don't be tricky about reusing pages (yet) */
-	nskb = sky2_rx_alloc(sky2);
-	if (unlikely(!nskb))
-		return NULL;
+	nre.skb = sky2_rx_alloc(sky2);
+	if (unlikely(!nre.skb))
+		goto nobuf;
+
+	if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
+		goto nomap;
 
 	skb = re->skb;
 	sky2_rx_unmap_skb(sky2->hw->pdev, re);
-
 	prefetch(skb->data);
-	re->skb = nskb;
-	if (sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space)) {
-		dev_kfree_skb(nskb);
-		re->skb = skb;
-		return NULL;
-	}
+	*re = nre;
 
 	if (skb_shinfo(skb)->nr_frags)
 		skb_put_frags(skb, hdr_space, length);
 	else
 		skb_put(skb, length);
 	return skb;
+
+nomap:
+	dev_kfree_skb(nre.skb);
+nobuf:
+	return NULL;
 }
 
 /*
-- 
cgit v1.2.3


From 90c30335a70e96b8b8493b7deb15e6b30e6d9fce Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Wed, 3 Feb 2010 08:31:12 +0000
Subject: sky2: Flow control frames recorded as dropped packets

Thanks for your patch.  A more general solution would be to move the
rx_dropped up into sky2_receive.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 72c92495a9b3..744362272e2d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2404,6 +2404,9 @@ okay:
 		skb = receive_copy(sky2, re, length);
 	else
 		skb = receive_new(sky2, re, length);
+
+	dev->stats.rx_dropped += (skb == NULL);
+
 resubmit:
 	sky2_rx_submit(sky2, re);
 
@@ -2515,11 +2518,10 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 		case OP_RXSTAT:
 			total_packets[port]++;
 			total_bytes[port] += length;
+
 			skb = sky2_receive(dev, length, status);
-			if (unlikely(!skb)) {
-				dev->stats.rx_dropped++;
+			if (!skb)
 				break;
-			}
 
 			/* This chip reports checksum status differently */
 			if (hw->flags & SKY2_HW_NEW_LE) {
-- 
cgit v1.2.3


From 303863f43fa5106637325a213717b2f306e2efc3 Mon Sep 17 00:00:00 2001
From: Adam Buchbinder <adam.buchbinder@gmail.com>
Date: Fri, 11 Dec 2009 16:35:37 -0500
Subject: Fix a grammar error (redundant "be") in comment

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/net/wireless/zd1211rw/zd_mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index f14deb0c8514..7a24802df2e1 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
  * zd_mac_tx_failed - callback for failed frames
  * @dev: the mac80211 wireless device
  *
- * This function is called if a frame couldn't be successfully be
+ * This function is called if a frame couldn't be successfully
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */
-- 
cgit v1.2.3


From a089377f29d3af0f62f3bdc6db0c5042513fc3f3 Mon Sep 17 00:00:00 2001
From: Adam Buchbinder <adam.buchbinder@gmail.com>
Date: Fri, 11 Dec 2009 16:35:38 -0500
Subject: Fix misspelling of "truly" in a label.

A label reads 'truely_dead' rather than 'truly_dead'; this fixes it.
No change in functionality.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/net/typhoon.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 39f1fc650be6..d1a80685e3a7 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -2113,7 +2113,7 @@ typhoon_tx_timeout(struct net_device *dev)
 	if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
 		printk(KERN_WARNING "%s: could not reset in tx timeout\n",
 					dev->name);
-		goto truely_dead;
+		goto truly_dead;
 	}
 
 	/* If we ever start using the Hi ring, it will need cleaning too */
@@ -2123,13 +2123,13 @@ typhoon_tx_timeout(struct net_device *dev)
 	if(typhoon_start_runtime(tp) < 0) {
 		printk(KERN_ERR "%s: could not start runtime in tx timeout\n",
 					dev->name);
-		goto truely_dead;
+		goto truly_dead;
         }
 
 	netif_wake_queue(dev);
 	return;
 
-truely_dead:
+truly_dead:
 	/* Reset the hardware, and turn off carrier to avoid more timeouts */
 	typhoon_reset(tp->ioaddr, NoWait);
 	netif_carrier_off(dev);
-- 
cgit v1.2.3


From c41b20e721ea4f6f20f66a66e7f0c3c97a2ca9c2 Mon Sep 17 00:00:00 2001
From: Adam Buchbinder <adam.buchbinder@gmail.com>
Date: Fri, 11 Dec 2009 16:35:39 -0500
Subject: Fix misspellings of "truly" in comments.

Some comments misspell "truly"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/char/random.c                 | 2 +-
 drivers/gpu/drm/radeon/radeon_state.c | 2 +-
 drivers/net/cs89x0.c                  | 2 +-
 fs/dlm/member.c                       | 2 +-
 fs/namei.c                            | 2 +-
 include/math-emu/op-common.h          | 2 +-
 kernel/trace/ring_buffer.c            | 4 ++--
 7 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 2849713d2231..2fd3d39995d5 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1191,7 +1191,7 @@ const struct file_operations urandom_fops = {
 void generate_random_uuid(unsigned char uuid_out[16])
 {
 	get_random_bytes(uuid_out, 16);
-	/* Set UUID version to 4 --- truely random generation */
+	/* Set UUID version to 4 --- truly random generation */
 	uuid_out[6] = (uuid_out[6] & 0x0F) | 0x40;
 	/* Set the UUID variant to DCE */
 	uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80;
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 067167cb39ca..1982a87386a1 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -1065,7 +1065,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev,
 					/* judging by the first tile offset needed, could possibly
 					   directly address/clear 4x4 tiles instead of 8x2 * 4x4
 					   macro tiles, though would still need clear mask for
-					   right/bottom if truely 4x4 granularity is desired ? */
+					   right/bottom if truly 4x4 granularity is desired ? */
 					OUT_RING(tileoffset * 16);
 					/* the number of tiles to clear */
 					OUT_RING(nrtilesx + 1);
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 0e79cef95c0a..9b5bbc6ea2fa 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -580,7 +580,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	}
 
 #ifdef CONFIG_SH_HICOSH4
-	/* truely reset the chip */
+	/* truly reset the chip */
 	writeword(ioaddr, ADD_PORT, 0x0114);
 	writeword(ioaddr, DATA_PORT, 0x0040);
 #endif
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 84f70bfb0baf..b12532e553f8 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -312,7 +312,7 @@ int dlm_ls_stop(struct dlm_ls *ls)
 	/*
 	 * This in_recovery lock does two things:
 	 * 1) Keeps this function from returning until all threads are out
-	 *    of locking routines and locking is truely stopped.
+	 *    of locking routines and locking is truly stopped.
 	 * 2) Keeps any new requests from being processed until it's unlocked
 	 *    when recovery is complete.
 	 */
diff --git a/fs/namei.c b/fs/namei.c
index 94a5e60779f9..e05c243105a0 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2556,7 +2556,7 @@ SYSCALL_DEFINE2(link, const char __user *, oldname, const char __user *, newname
  *	e) conversion from fhandle to dentry may come in the wrong moment - when
  *	   we are removing the target. Solution: we will have to grab ->i_mutex
  *	   in the fhandle_to_dentry code. [FIXME - current nfsfh.c relies on
- *	   ->i_mutex on parents, which works but leads to some truely excessive
+ *	   ->i_mutex on parents, which works but leads to some truly excessive
  *	   locking].
  */
 static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index f456534dcaf9..fd882261225e 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -29,7 +29,7 @@
   _FP_FRAC_DECL_##wc(X)
 
 /*
- * Finish truely unpacking a native fp value by classifying the kind
+ * Finish truly unpacking a native fp value by classifying the kind
  * of fp value and normalizing both the exponent and the fraction.
  */
 
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 8c1b2d290718..9ab578f1bb65 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2541,7 +2541,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_record_disable);
  * @buffer: The ring buffer to enable writes
  *
  * Note, multiple disables will need the same number of enables
- * to truely enable the writing (much like preempt_disable).
+ * to truly enable the writing (much like preempt_disable).
  */
 void ring_buffer_record_enable(struct ring_buffer *buffer)
 {
@@ -2577,7 +2577,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_record_disable_cpu);
  * @cpu: The CPU to enable.
  *
  * Note, multiple disables will need the same number of enables
- * to truely enable the writing (much like preempt_disable).
+ * to truly enable the writing (much like preempt_disable).
  */
 void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu)
 {
-- 
cgit v1.2.3


From 640462cbd659990bcceaf86ab17ccbc02147e62a Mon Sep 17 00:00:00 2001
From: Rudy Matela <rudy.matela@gmail.com>
Date: Wed, 9 Dec 2009 11:35:40 -0300
Subject: Coding style correction of some wan drivers

Added a space separating some if/switch/while keywords from the following
parenthesis to conform to the CodingStyle.

Signed-off-by: Rudy Matela <rudy.matela@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/net/wan/cosa.c       | 10 +++++-----
 drivers/net/wan/hdlc_cisco.c |  8 ++++----
 drivers/net/wan/hdlc_x25.c   |  4 ++--
 3 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index b36bf96eb502..f0bd70fb650c 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -811,7 +811,7 @@ static ssize_t cosa_read(struct file *file,
 	cosa_enable_rx(chan);
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->rxwaitq, &wait);
-	while(!chan->rx_status) {
+	while (!chan->rx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -896,7 +896,7 @@ static ssize_t cosa_write(struct file *file,
 
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->txwaitq, &wait);
-	while(!chan->tx_status) {
+	while (!chan->tx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -1153,7 +1153,7 @@ static int cosa_ioctl_common(struct cosa_data *cosa,
 	struct channel_data *channel, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
-	switch(cmd) {
+	switch (cmd) {
 	case COSAIORSET:	/* Reset the device */
 		if (!capable(CAP_NET_ADMIN))
 			return -EACCES;
@@ -1704,7 +1704,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status)
 			spin_unlock_irqrestore(&cosa->lock, flags);
 			return;
 		}
-		while(1) {
+		while (1) {
 			cosa->txchan++;
 			i++;
 			if (cosa->txchan >= cosa->nchannels)
@@ -2010,7 +2010,7 @@ again:
 static void debug_status_in(struct cosa_data *cosa, int status)
 {
 	char *s;
-	switch(status & SR_CMD_FROM_SRP_MASK) {
+	switch (status & SR_CMD_FROM_SRP_MASK) {
 	case SR_UP_REQUEST:
 		s = "RX_REQ";
 		break;
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index f1bff98acd1f..1ceccf1ca6c7 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -141,7 +141,7 @@ static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev)
 	    data->address != CISCO_UNICAST)
 		return cpu_to_be16(ETH_P_HDLC);
 
-	switch(data->protocol) {
+	switch (data->protocol) {
 	case cpu_to_be16(ETH_P_IP):
 	case cpu_to_be16(ETH_P_IPX):
 	case cpu_to_be16(ETH_P_IPV6):
@@ -190,7 +190,7 @@ static int cisco_rx(struct sk_buff *skb)
 		cisco_data = (struct cisco_packet*)(skb->data + sizeof
 						    (struct hdlc_header));
 
-		switch(ntohl (cisco_data->type)) {
+		switch (ntohl (cisco_data->type)) {
 		case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */
 			in_dev = dev->ip_ptr;
 			addr = 0;
@@ -245,8 +245,8 @@ static int cisco_rx(struct sk_buff *skb)
 
 			dev_kfree_skb_any(skb);
 			return NET_RX_SUCCESS;
-		} /* switch(keepalive type) */
-	} /* switch(protocol) */
+		} /* switch (keepalive type) */
+	} /* switch (protocol) */
 
 	printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
 	       ntohs(data->protocol));
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index aa9248f8eb1a..6e1ca256effd 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -202,10 +202,10 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 		return 0; /* return protocol only, no settable parameters */
 
 	case IF_PROTO_X25:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
-- 
cgit v1.2.3


From ae06b8330aefb0338017c427d5694fc8ea9144c8 Mon Sep 17 00:00:00 2001
From: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Date: Thu, 4 Feb 2010 09:21:28 -0800
Subject: can: ems_usb: removed duplicated code setting local echo support

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/usb/ems_usb.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index bfab283ba9b1..11c87840cc00 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -1024,8 +1024,6 @@ static int ems_usb_probe(struct usb_interface *intf,
 	dev->can.do_set_mode = ems_usb_set_mode;
 	dev->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
 
-	netdev->flags |= IFF_ECHO; /* we support local echo */
-
 	netdev->netdev_ops = &ems_usb_netdev_ops;
 
 	netdev->flags |= IFF_ECHO; /* we support local echo */
-- 
cgit v1.2.3


From 1b924032533033a4dae1a239981677bdae21949b Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Thu, 4 Feb 2010 09:33:21 -0800
Subject: stmmac: fix 'lenght' typo in comments and code

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/stmmac/common.h         | 2 +-
 drivers/net/stmmac/dwmac100.c       | 2 +-
 drivers/net/stmmac/dwmac1000_dma.c  | 4 ++--
 drivers/net/stmmac/stmmac_ethtool.c | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
index 7267bcd43d06..2a58172e986a 100644
--- a/drivers/net/stmmac/common.h
+++ b/drivers/net/stmmac/common.h
@@ -44,7 +44,7 @@ struct stmmac_extra_stats {
 	unsigned long rx_toolong;
 	unsigned long rx_collision;
 	unsigned long rx_crc;
-	unsigned long rx_lenght;
+	unsigned long rx_length;
 	unsigned long rx_mii;
 	unsigned long rx_multicast;
 	unsigned long rx_gmac_overflow;
diff --git a/drivers/net/stmmac/dwmac100.c b/drivers/net/stmmac/dwmac100.c
index 82dde774d4c5..ac48ed787040 100644
--- a/drivers/net/stmmac/dwmac100.c
+++ b/drivers/net/stmmac/dwmac100.c
@@ -265,7 +265,7 @@ static int dwmac100_get_rx_frame_status(void *data,
 		ret = discard_frame;
 
 	if (unlikely(p->des01.rx.length_error)) {
-		x->rx_lenght++;
+		x->rx_length++;
 		ret = discard_frame;
 	}
 	if (unlikely(p->des01.rx.mii_error)) {
diff --git a/drivers/net/stmmac/dwmac1000_dma.c b/drivers/net/stmmac/dwmac1000_dma.c
index 68245508e2de..39d436a2da68 100644
--- a/drivers/net/stmmac/dwmac1000_dma.c
+++ b/drivers/net/stmmac/dwmac1000_dma.c
@@ -230,7 +230,7 @@ static int dwmac1000_coe_rdes0(int ipc_err, int type, int payload_err)
 
 	/* bits 5 7 0 | Frame status
 	 * ----------------------------------------------------------
-	 *      0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects)
+	 *      0 0 0 | IEEE 802.3 Type frame (length < 1536 octects)
 	 *      1 0 0 | IPv4/6 No CSUM errorS.
 	 *      1 0 1 | IPv4/6 CSUM PAYLOAD error
 	 *      1 1 0 | IPv4/6 CSUM IP HR error
@@ -331,7 +331,7 @@ static int dwmac1000_get_rx_frame_status(void *data,
 	}
 	if (unlikely(p->des01.erx.length_error)) {
 		DBG(KERN_ERR "GMAC RX: length_error error\n");
-		x->rx_lenght++;
+		x->rx_length++;
 		ret = discard_frame;
 	}
 #ifdef STMMAC_VLAN_TAG_USED
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 0abeff6193a1..c021eaa3ca69 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -62,7 +62,7 @@ static const struct  stmmac_stats stmmac_gstrings_stats[] = {
 	STMMAC_STAT(rx_toolong),
 	STMMAC_STAT(rx_collision),
 	STMMAC_STAT(rx_crc),
-	STMMAC_STAT(rx_lenght),
+	STMMAC_STAT(rx_length),
 	STMMAC_STAT(rx_mii),
 	STMMAC_STAT(rx_multicast),
 	STMMAC_STAT(rx_gmac_overflow),
-- 
cgit v1.2.3


From feeb2721a7a0bd0cfa5b8847f80aec93aa2cc00d Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Wed, 3 Feb 2010 21:59:51 +0000
Subject: igb: make certain to reassign legacy interrupt vectors after reset

This change corrects an issue that will cause false hangs when using either
82575 or 82580 in legacy interrupt mode.  The issue is caused when there is
a slow traffic flow and an "ethtool -r" is executed while using legacy or
MSI interrupts.  MSI-X is not affected by this issue due to the fact that
we were already reconfiguring the vectors after reset.

If possible it would be best to push this for net-2.6 since it is resolving
a bug but if that is not possible then net-next-2.6 will be fine.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 997124d2992a..c881347cb26d 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -421,6 +421,8 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
 			msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
 		if (tx_queue > IGB_N0_QUEUE)
 			msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+		if (!adapter->msix_entries && msix_vector == 0)
+			msixbm |= E1000_EIMS_OTHER;
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 		q_vector->eims_value = msixbm;
 		break;
@@ -877,7 +879,6 @@ static int igb_request_irq(struct igb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
-	struct e1000_hw *hw = &adapter->hw;
 	int err = 0;
 
 	if (adapter->msix_entries) {
@@ -909,20 +910,7 @@ static int igb_request_irq(struct igb_adapter *adapter)
 		igb_setup_all_tx_resources(adapter);
 		igb_setup_all_rx_resources(adapter);
 	} else {
-		switch (hw->mac.type) {
-		case e1000_82575:
-			wr32(E1000_MSIXBM(0),
-			     (E1000_EICR_RX_QUEUE0 |
-			      E1000_EICR_TX_QUEUE0 |
-			      E1000_EIMS_OTHER));
-			break;
-		case e1000_82580:
-		case e1000_82576:
-			wr32(E1000_IVAR0, E1000_IVAR_VALID);
-			break;
-		default:
-			break;
-		}
+		igb_assign_vector(adapter->q_vector[0], 0);
 	}
 
 	if (adapter->flags & IGB_FLAG_HAS_MSI) {
@@ -1140,6 +1128,8 @@ int igb_up(struct igb_adapter *adapter)
 	}
 	if (adapter->msix_entries)
 		igb_configure_msix(adapter);
+	else
+		igb_assign_vector(adapter->q_vector[0], 0);
 
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
-- 
cgit v1.2.3


From f8f76db1db369f3a130ac3fd33e2eee5f1610d9c Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 4 Feb 2010 10:23:02 -0800
Subject: libphy: add phy_find_first function

Many drivers do this in them manually. Now they can use this function.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy_device.c | 16 ++++++++++++++++
 include/linux/phy.h          |  1 +
 2 files changed, 17 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index adbc0fded130..db1794546c56 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -276,6 +276,22 @@ int phy_device_register(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_device_register);
 
+/**
+ * phy_find_first - finds the first PHY device on the bus
+ * @bus: the target MII bus
+ */
+struct phy_device *phy_find_first(struct mii_bus *bus)
+{
+	int addr;
+
+	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+		if (bus->phy_map[addr])
+			return bus->phy_map[addr];
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(phy_find_first);
+
 /**
  * phy_prepare_link - prepares the PHY layer to monitor link status
  * @phydev: target phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 6a7eb402165d..14d7fdf6a90a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -452,6 +452,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 		u32 flags, phy_interface_t interface);
 struct phy_device * phy_attach(struct net_device *dev,
 		const char *bus_id, u32 flags, phy_interface_t interface);
+struct phy_device *phy_find_first(struct mii_bus *bus);
 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 		void (*handler)(struct net_device *), u32 flags,
 		phy_interface_t interface);
-- 
cgit v1.2.3


From 8ee2bf9ab792d0c02b13ca3acbd036debb7745d9 Mon Sep 17 00:00:00 2001
From: Sriramakrishnan <srk@ti.com>
Date: Thu, 19 Nov 2009 15:58:25 +0530
Subject: TI Davinci EMAC : Re-use driver for other platforms.

The davinci EMAC peripheral is also available on other TI
platforms -notably TI AM3517 SoC. This patch modifies the
config option and the platform structure header files so that
the driver can be reused on non-davinci platforms as well.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Chaithrika U S <chaithrika@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/common.c              |  2 +-
 arch/arm/mach-davinci/include/mach/da8xx.h  |  2 +-
 arch/arm/mach-davinci/include/mach/dm365.h  |  2 +-
 arch/arm/mach-davinci/include/mach/dm644x.h |  2 +-
 arch/arm/mach-davinci/include/mach/dm646x.h |  2 +-
 arch/arm/mach-davinci/include/mach/emac.h   | 36 -----------------------------
 drivers/net/Kconfig                         |  2 +-
 drivers/net/davinci_emac.c                  |  3 +--
 include/linux/davinci_emac.h                | 36 +++++++++++++++++++++++++++++
 9 files changed, 43 insertions(+), 44 deletions(-)
 delete mode 100644 arch/arm/mach-davinci/include/mach/emac.h
 create mode 100644 include/linux/davinci_emac.h

(limited to 'drivers/net')

diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index c2de94cde56a..94f27cbcd55a 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -11,13 +11,13 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/etherdevice.h>
+#include <linux/davinci_emac.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
 #include <mach/cputype.h>
-#include <mach/emac.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index d43a4b6b6d76..d9a7f11894c4 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -13,10 +13,10 @@
 
 #include <video/da8xx-fb.h>
 
+#include <linux/davinci_emac.h>
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <mach/mmc.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index 9fc5a64a5364..c3610eb39869 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -14,8 +14,8 @@
 #define __ASM_ARCH_DM665_H
 
 #include <linux/platform_device.h>
+#include <linux/davinci_emac.h>
 #include <mach/hardware.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <mach/keyscan.h>
 #include <media/davinci/vpfe_capture.h>
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 44e8f0fae9ea..1a8b09ccc3c8 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -22,8 +22,8 @@
 #ifndef __ASM_ARCH_DM644X_H
 #define __ASM_ARCH_DM644X_H
 
+#include <linux/davinci_emac.h>
 #include <mach/hardware.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <media/davinci/vpfe_capture.h>
 
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 8221153bb2af..846da98b619a 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -12,11 +12,11 @@
 #define __ASM_ARCH_DM646X_H
 
 #include <mach/hardware.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/clk.h>
+#include <linux/davinci_emac.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
deleted file mode 100644
index beff4fb7c845..000000000000
--- a/arch/arm/mach-davinci/include/mach/emac.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci EMAC platform support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _MACH_DAVINCI_EMAC_H
-#define _MACH_DAVINCI_EMAC_H
-
-#include <linux/if_ether.h>
-#include <linux/memory.h>
-
-struct emac_platform_data {
-	char mac_addr[ETH_ALEN];
-	u32 ctrl_reg_offset;
-	u32 ctrl_mod_reg_offset;
-	u32 ctrl_ram_offset;
-	u32 mdio_reg_offset;
-	u32 ctrl_ram_size;
-	u32 phy_mask;
-	u32 mdio_max_freq;
-	u8 rmii_en;
-	u8 version;
-};
-
-enum {
-	EMAC_VERSION_1,	/* DM644x */
-	EMAC_VERSION_2,	/* DM646x */
-};
-
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
-#endif
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dd9a09c72dff..18300625b05b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -920,7 +920,7 @@ config NET_NETX
 
 config TI_DAVINCI_EMAC
 	tristate "TI DaVinci EMAC Support"
-	depends on ARM && ARCH_DAVINCI
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
 	select PHYLIB
 	help
 	  This driver supports TI's DaVinci Ethernet .
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 33c4fe26178c..9ebac35d3af0 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -62,12 +62,11 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/davinci_emac.h>
 
 #include <asm/irq.h>
 #include <asm/page.h>
 
-#include <mach/emac.h>
-
 static int debug_level;
 module_param(debug_level, int, 0);
 MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
new file mode 100644
index 000000000000..ff5548747df4
--- /dev/null
+++ b/include/linux/davinci_emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _LINUX_DAVINCI_EMAC_H
+#define _LINUX_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+	char mac_addr[ETH_ALEN];
+	u32 ctrl_reg_offset;
+	u32 ctrl_mod_reg_offset;
+	u32 ctrl_ram_offset;
+	u32 mdio_reg_offset;
+	u32 ctrl_ram_size;
+	u32 phy_mask;
+	u32 mdio_max_freq;
+	u8 rmii_en;
+	u8 version;
+};
+
+enum {
+	EMAC_VERSION_1,	/* DM644x */
+	EMAC_VERSION_2,	/* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
-- 
cgit v1.2.3


From 01a9af36cd9d25fc71e28192974732d8053bd1c0 Mon Sep 17 00:00:00 2001
From: Sriramakrishnan <srk@ti.com>
Date: Thu, 19 Nov 2009 15:58:26 +0530
Subject: TI Davinci EMAC : add platform specific interrupt enable/disable
 logic.

On certain SOCs, the EMAC controller is interfaced with a wrapper logic
for handling interrupts. This  patch implements a platform
specific hook to cater to platforms that require custom interrupt
handling logic

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Chaithrika U S <chaithrika@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 drivers/net/davinci_emac.c   | 11 +++++++++++
 include/linux/davinci_emac.h |  2 ++
 2 files changed, 13 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 9ebac35d3af0..c735b62baa03 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -487,6 +487,9 @@ struct emac_priv {
 	struct mii_bus *mii_bus;
 	struct phy_device *phydev;
 	spinlock_t lock;
+	/*platform specific members*/
+	void (*int_enable) (void);
+	void (*int_disable) (void);
 };
 
 /* clock frequency for EMAC */
@@ -1001,6 +1004,8 @@ static void emac_int_disable(struct emac_priv *priv)
 		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
 		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
 		/* NOTE: Rx Threshold and Misc interrupts are not disabled */
+		if (priv->int_disable)
+			priv->int_disable();
 
 		local_irq_restore(flags);
 
@@ -1020,6 +1025,9 @@ static void emac_int_disable(struct emac_priv *priv)
 static void emac_int_enable(struct emac_priv *priv)
 {
 	if (priv->version == EMAC_VERSION_2) {
+		if (priv->int_enable)
+			priv->int_enable();
+
 		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
 		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
 
@@ -2659,6 +2667,9 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
 	priv->phy_mask = pdata->phy_mask;
 	priv->rmii_en = pdata->rmii_en;
 	priv->version = pdata->version;
+	priv->int_enable = pdata->interrupt_enable;
+	priv->int_disable = pdata->interrupt_disable;
+
 	emac_dev = &ndev->dev;
 	/* Get EMAC platform data */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index ff5548747df4..6d894efd8a3f 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -25,6 +25,8 @@ struct emac_platform_data {
 	u32 mdio_max_freq;
 	u8 rmii_en;
 	u8 version;
+	void (*interrupt_enable) (void);
+	void (*interrupt_disable) (void);
 };
 
 enum {
-- 
cgit v1.2.3


From ad021ae8862209864dc8ebd3b7d3a55ce84b9ea2 Mon Sep 17 00:00:00 2001
From: Sriramakrishnan <srk@ti.com>
Date: Thu, 19 Nov 2009 15:58:27 +0530
Subject: TI Davinci EMAC : Abstract Buffer address translation logic.

When programming the DMA engine, the next pointers must be
programmed with physical address as seen from the DMA master
address space. This address may be different from physical
address of the buffer RAM area. This patch abstracts the
buffer address translation logic.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Chaithrika U S <chaithrika@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 drivers/net/davinci_emac.c   | 41 ++++++++++++++++++++++++-----------------
 include/linux/davinci_emac.h |  1 +
 2 files changed, 25 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index c735b62baa03..1605bc225b0c 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -464,6 +464,7 @@ struct emac_priv {
 	void __iomem *ctrl_base;
 	void __iomem *emac_ctrl_ram;
 	u32 ctrl_ram_size;
+	u32 hw_ram_addr;
 	struct emac_txch *txch[EMAC_DEF_MAX_TX_CH];
 	struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH];
 	u32 link; /* 1=link on, 0=link off */
@@ -497,11 +498,9 @@ static struct clk *emac_clk;
 static unsigned long emac_bus_frequency;
 static unsigned long mdio_max_freq;
 
-/* EMAC internal utility function */
-static inline u32 emac_virt_to_phys(void __iomem *addr)
-{
-	return (u32 __force) io_v2p(addr);
-}
+#define emac_virt_to_phys(addr, priv) \
+	(((u32 __force)(addr) - (u32 __force)(priv->emac_ctrl_ram)) \
+	+ priv->hw_ram_addr)
 
 /* Cache macros - Packet buffers would be from skb pool which is cached */
 #define EMAC_VIRT_NOCACHE(addr) (addr)
@@ -1309,7 +1308,7 @@ static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
 	curr_bd = txch->active_queue_head;
 	if (NULL == curr_bd) {
 		emac_write(EMAC_TXCP(ch),
-			   emac_virt_to_phys(txch->last_hw_bdprocessed));
+			   emac_virt_to_phys(txch->last_hw_bdprocessed, priv));
 		txch->no_active_pkts++;
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
 		return 0;
@@ -1319,7 +1318,7 @@ static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
 	while ((curr_bd) &&
 	      ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
 	      (pkts_processed < budget)) {
-		emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd));
+		emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd, priv));
 		txch->active_queue_head = curr_bd->next;
 		if (frame_status & EMAC_CPPI_EOQ_BIT) {
 			if (curr_bd->next) {	/* misqueued packet */
@@ -1406,7 +1405,7 @@ static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch)
 		txch->active_queue_tail = curr_bd;
 		if (1 != txch->queue_active) {
 			emac_write(EMAC_TXHDP(ch),
-					emac_virt_to_phys(curr_bd));
+					emac_virt_to_phys(curr_bd, priv));
 			txch->queue_active = 1;
 		}
 		++txch->queue_reinit;
@@ -1418,10 +1417,11 @@ static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch)
 		tail_bd->next = curr_bd;
 		txch->active_queue_tail = curr_bd;
 		tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
-		tail_bd->h_next = (int)emac_virt_to_phys(curr_bd);
+		tail_bd->h_next = (int)emac_virt_to_phys(curr_bd, priv);
 		frame_status = tail_bd->mode;
 		if (frame_status & EMAC_CPPI_EOQ_BIT) {
-			emac_write(EMAC_TXHDP(ch), emac_virt_to_phys(curr_bd));
+			emac_write(EMAC_TXHDP(ch),
+				emac_virt_to_phys(curr_bd, priv));
 			frame_status &= ~(EMAC_CPPI_EOQ_BIT);
 			tail_bd->mode = frame_status;
 			++txch->end_of_queue_add;
@@ -1611,7 +1611,8 @@ static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param)
 		}
 
 		/* populate the hardware descriptor */
-		curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head);
+		curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head,
+				priv);
 		/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
 		curr_bd->buff_ptr = virt_to_phys(curr_bd->data_ptr);
 		curr_bd->off_b_len = rxch->buf_size;
@@ -1886,7 +1887,7 @@ static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch,
 		rxch->active_queue_tail = curr_bd;
 		if (0 != rxch->queue_active) {
 			emac_write(EMAC_RXHDP(ch),
-				   emac_virt_to_phys(rxch->active_queue_head));
+			   emac_virt_to_phys(rxch->active_queue_head, priv));
 			rxch->queue_active = 1;
 		}
 	} else {
@@ -1897,11 +1898,11 @@ static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch,
 		rxch->active_queue_tail = curr_bd;
 		tail_bd->next = curr_bd;
 		tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
-		tail_bd->h_next = emac_virt_to_phys(curr_bd);
+		tail_bd->h_next = emac_virt_to_phys(curr_bd, priv);
 		frame_status = tail_bd->mode;
 		if (frame_status & EMAC_CPPI_EOQ_BIT) {
 			emac_write(EMAC_RXHDP(ch),
-					emac_virt_to_phys(curr_bd));
+					emac_virt_to_phys(curr_bd, priv));
 			frame_status &= ~(EMAC_CPPI_EOQ_BIT);
 			tail_bd->mode = frame_status;
 			++rxch->end_of_queue_add;
@@ -1994,7 +1995,7 @@ static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
 		curr_pkt->num_bufs = 1;
 		curr_pkt->pkt_length =
 			(frame_status & EMAC_RX_BD_PKT_LENGTH_MASK);
-		emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd));
+		emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd, priv));
 		++rxch->processed_bd;
 		last_bd = curr_bd;
 		curr_bd = last_bd->next;
@@ -2005,7 +2006,7 @@ static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
 			if (curr_bd) {
 				++rxch->mis_queued_packets;
 				emac_write(EMAC_RXHDP(ch),
-					   emac_virt_to_phys(curr_bd));
+					   emac_virt_to_phys(curr_bd, priv));
 			} else {
 				++rxch->end_of_queue;
 				rxch->queue_active = 0;
@@ -2106,7 +2107,7 @@ static int emac_hw_enable(struct emac_priv *priv)
 		emac_write(EMAC_RXINTMASKSET, BIT(ch));
 		rxch->queue_active = 1;
 		emac_write(EMAC_RXHDP(ch),
-			   emac_virt_to_phys(rxch->active_queue_head));
+			   emac_virt_to_phys(rxch->active_queue_head, priv));
 	}
 
 	/* Enable MII */
@@ -2702,6 +2703,12 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
 	priv->ctrl_ram_size = pdata->ctrl_ram_size;
 	priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset;
 
+	if (pdata->hw_ram_addr)
+		priv->hw_ram_addr = pdata->hw_ram_addr;
+	else
+		priv->hw_ram_addr = (u32 __force)res->start +
+					pdata->ctrl_ram_offset;
+
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
 		dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n");
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 6d894efd8a3f..7c930dba477c 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -19,6 +19,7 @@ struct emac_platform_data {
 	u32 ctrl_reg_offset;
 	u32 ctrl_mod_reg_offset;
 	u32 ctrl_ram_offset;
+	u32 hw_ram_addr;
 	u32 mdio_reg_offset;
 	u32 ctrl_ram_size;
 	u32 phy_mask;
-- 
cgit v1.2.3


From 15c052fc7f4a1b3544602be8af77e31bba9261bf Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 4 Feb 2010 13:32:46 -0800
Subject: qlge: Add watchdog timer.

Add periodic heartbeat register read to trigger the eeh
recovery process.
We see cases where an eeh error was injected and the slot was
suspended.  An asic access attempt is required to flush the recovery process,
but without interrupts the process can stall.
Adding this periodic register read causes the recovery process to begin.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      |  1 +
 drivers/net/qlge/qlge_main.c | 30 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 780a38731bcc..ebfd17776b53 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2145,6 +2145,7 @@ struct ql_adapter {
 	struct completion ide_completion;
 	struct nic_operations *nic_ops;
 	u16 device_id;
+	struct timer_list timer;
 	atomic_t lb_count;
 };
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 7e000295f359..87a40d168b36 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4574,6 +4574,21 @@ static const struct net_device_ops qlge_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= qlge_vlan_rx_kill_vid,
 };
 
+static void ql_timer(unsigned long data)
+{
+	struct ql_adapter *qdev = (struct ql_adapter *)data;
+	u32 var = 0;
+
+	var = ql_read32(qdev, STS);
+	if (pci_channel_offline(qdev->pdev)) {
+		QPRINTK(qdev, IFUP, ERR, "EEH STS = 0x%.08x.\n", var);
+		return;
+	}
+
+	qdev->timer.expires = jiffies + (5*HZ);
+	add_timer(&qdev->timer);
+}
+
 static int __devinit qlge_probe(struct pci_dev *pdev,
 				const struct pci_device_id *pci_entry)
 {
@@ -4625,6 +4640,14 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
 		pci_disable_device(pdev);
 		return err;
 	}
+	/* Start up the timer to trigger EEH if
+	 * the bus goes dead
+	 */
+	init_timer_deferrable(&qdev->timer);
+	qdev->timer.data = (unsigned long)qdev;
+	qdev->timer.function = ql_timer;
+	qdev->timer.expires = jiffies + (5*HZ);
+	add_timer(&qdev->timer);
 	ql_link_off(qdev);
 	ql_display_dev_info(ndev);
 	atomic_set(&qdev->lb_count, 0);
@@ -4645,6 +4668,8 @@ int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget)
 static void __devexit qlge_remove(struct pci_dev *pdev)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	del_timer_sync(&qdev->timer);
 	unregister_netdev(ndev);
 	ql_release_all(pdev);
 	pci_disable_device(pdev);
@@ -4757,6 +4782,8 @@ static void qlge_io_resume(struct pci_dev *pdev)
 		QPRINTK(qdev, IFUP, ERR,
 			"Device was not running prior to EEH.\n");
 	}
+	qdev->timer.expires = jiffies + (5*HZ);
+	add_timer(&qdev->timer);
 	netif_device_attach(ndev);
 }
 
@@ -4773,6 +4800,7 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
 	int err;
 
 	netif_device_detach(ndev);
+	del_timer_sync(&qdev->timer);
 
 	if (netif_running(ndev)) {
 		err = ql_adapter_down(qdev);
@@ -4817,6 +4845,8 @@ static int qlge_resume(struct pci_dev *pdev)
 			return err;
 	}
 
+	qdev->timer.expires = jiffies + (5*HZ);
+	add_timer(&qdev->timer);
 	netif_device_attach(ndev);
 
 	return 0;
-- 
cgit v1.2.3


From e0fee99fce97af37b1db6ed8dd6951fb9a8d7201 Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Thu, 4 Feb 2010 10:11:18 +0000
Subject: qlge: removing unreachable block of code

Currently the qlge_change_mtu() is never called if the new_mtu is
equal current MTU, due this condition on dev_set_mtu():

        if (new_mtu == dev->mtu)
                return 0;

So, this block of code is never reached and is being removed.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 87a40d168b36..0c9e00f36cd9 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4123,9 +4123,6 @@ static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
 		QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n");
 	} else if (ndev->mtu == 9000 && new_mtu == 1500) {
 		QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n");
-	} else if ((ndev->mtu == 1500 && new_mtu == 1500) ||
-		   (ndev->mtu == 9000 && new_mtu == 9000)) {
-		return 0;
 	} else
 		return -EINVAL;
 
-- 
cgit v1.2.3


From 746079dabcf74be2a16dc983ac597156e3d2e051 Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Thu, 4 Feb 2010 10:11:19 +0000
Subject: qlge: Code clean up

Just reordering this assignment that doesn't depend on any
condition.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 0c9e00f36cd9..3cb60e10d456 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4129,12 +4129,12 @@ static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
 	queue_delayed_work(qdev->workqueue,
 			&qdev->mpi_port_cfg_work, 3*HZ);
 
+	ndev->mtu = new_mtu;
+
 	if (!netif_running(qdev->ndev)) {
-		ndev->mtu = new_mtu;
 		return 0;
 	}
 
-	ndev->mtu = new_mtu;
 	status = ql_change_rx_buffers(qdev);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR,
-- 
cgit v1.2.3


From b405e8df26dfe4c56ab3f88f5cc1dfab0d220289 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 4 Feb 2010 22:31:41 -0800
Subject: e1000e: Fix namespace conflicts wrt. e1000_has_link

Reported by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/e1000.h   | 2 +-
 drivers/net/e1000e/ethtool.c | 2 +-
 drivers/net/e1000e/netdev.c  | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 318bdb28a7cd..c2ec095d2163 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -459,7 +459,7 @@ extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
 extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_update_stats(struct e1000_adapter *adapter);
-extern bool e1000_has_link(struct e1000_adapter *adapter);
+extern bool e1000e_has_link(struct e1000_adapter *adapter);
 extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
 
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 0aa50c229c79..b33e3cbe9ab0 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -202,7 +202,7 @@ static u32 e1000_get_link(struct net_device *netdev)
 	if (!netif_carrier_ok(netdev))
 		mac->get_link_status = 1;
 
-	return e1000_has_link(adapter);
+	return e1000e_has_link(adapter);
 }
 
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 14a80f8f6118..ffa37c682a00 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3472,7 +3472,7 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
 	       ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
-bool e1000_has_link(struct e1000_adapter *adapter)
+bool e1000e_has_link(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	bool link_active = 0;
@@ -3553,7 +3553,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 	u32 link, tctl;
 	int tx_pending = 0;
 
-	link = e1000_has_link(adapter);
+	link = e1000e_has_link(adapter);
 	if ((netif_carrier_ok(netdev)) && link) {
 		e1000e_enable_receives(adapter);
 		goto link_up;
-- 
cgit v1.2.3


From 947af2943576400628bba085eaa6b85143526133 Mon Sep 17 00:00:00 2001
From: Stefan Weil <weil@mail.berlios.de>
Date: Thu, 7 Jan 2010 00:03:52 +0100
Subject: Fix spelling of 'platform' in comments and doc

Replace platfrom -> platform.

This is a frequent spelling bug.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 Documentation/driver-model/platform.txt       | 2 +-
 arch/arm/mach-davinci/include/mach/i2c.h      | 2 +-
 arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 2 +-
 arch/arm/plat-s3c/include/plat/nand.h         | 2 +-
 arch/blackfin/include/asm/nand.h              | 4 ++--
 arch/powerpc/kernel/legacy_serial.c           | 2 +-
 drivers/mtd/maps/plat-ram.c                   | 2 +-
 drivers/net/cxgb3/sge.c                       | 4 ++--
 drivers/video/mbx/mbxfb.c                     | 2 +-
 include/linux/dm9000.h                        | 2 +-
 10 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 2e2c2ea90ceb..41f41632ee55 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -192,7 +192,7 @@ command line. This will execute all matching early_param() callbacks.
 User specified early platform devices will be registered at this point.
 For the early serial console case the user can specify port on the
 kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
-the class string, "serial" is the name of the platfrom driver and
+the class string, "serial" is the name of the platform driver and
 0 is the platform device id. If the id is -1 then the dot and the
 id can be omitted.
 
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index c248e9b7e825..44bdea13cc8c 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -1,5 +1,5 @@
 /*
- * DaVinci I2C controller platfrom_device info
+ * DaVinci I2C controller platform_device info
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 980a099e209c..dcef2287cb38 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - SPI Controller platfrom_device info
+ * S3C2410 - SPI Controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 226147b7e026..b64115fa93a4 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - NAND device controller platfrom_device info
+ * S3C2410 - NAND device controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index 3ae8b569edfc..3a1e79dfc8d9 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -1,5 +1,5 @@
 /*
- * BF5XX - NAND flash controller platfrom_device info
+ * BF5XX - NAND flash controller platform_device info
  *
  * Copyright 2007-2008 Analog Devices, Inc.
  *
@@ -8,7 +8,7 @@
 
 /* struct bf5xx_nand_platform
  *
- * define a interface between platfrom board specific code and
+ * define a interface between platform board specific code and
  * bf54x NFC driver.
  *
  * nr_partitions = number of partitions pointed to be partitoons (or zero)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 9ddfaef1a184..035ada5443ee 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -469,7 +469,7 @@ static int __init serial_dev_init(void)
 		return -ENODEV;
 
 	/*
-	 * Before we register the platfrom serial devices, we need
+	 * Before we register the platform serial devices, we need
 	 * to fixup their interrupts and their IO ports.
 	 */
 	DBG("Fixing serial ports interrupts and IO ports ...\n");
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index dafb91944e70..76a76be5a7bd 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -4,7 +4,7 @@
  *	http://www.simtec.co.uk/products/SWLINUX/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Generic platfrom device based RAM map
+ * Generic platform device based RAM map
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index bdbd14727e4b..5dbc125822b9 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -196,13 +196,13 @@ static inline void refill_rspq(struct adapter *adapter,
 /**
  *	need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
- *	Returns true if the platfrom needs sk_buff unmapping.  The compiler
+ *	Returns true if the platform needs sk_buff unmapping.  The compiler
  *	optimizes away unecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
 	/*
-	 * This structure is used to tell if the platfrom needs buffer
+	 * This structure is used to tell if the platform needs buffer
 	 * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
 	 */
 	struct dummy {
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index 01f77bcc68f9..afea9abbd678 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -693,7 +693,7 @@ static void __devinit setup_memc(struct fb_info *fbi)
 	unsigned long tmp;
 	int i;
 
-	/* FIXME: use platfrom specific parameters */
+	/* FIXME: use platform specific parameters */
 	/* setup SDRAM controller */
 	write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
 		LMCFG_LMA_TS),
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index c30879cf93bc..96e87693d933 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -23,7 +23,7 @@
 #define DM9000_PLATF_NO_EEPROM	(0x0010)
 #define DM9000_PLATF_SIMPLE_PHY (0x0020)  /* Use NSR to find LinkStatus */
 
-/* platfrom data for platfrom device structure's platfrom_data field */
+/* platform data for platform device structure's platform_data field */
 
 struct dm9000_plat_data {
 	unsigned int	flags;
-- 
cgit v1.2.3


From 0747e3bc54b43faaa88ab0b37eb5b6f50972965b Mon Sep 17 00:00:00 2001
From: Stefan Weil <weil@mail.berlios.de>
Date: Thu, 7 Jan 2010 00:44:08 +0100
Subject: Fix spelling of 'platform' in log messages

Replace platfrom -> platform.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/input/serio/i8042.c | 2 +-
 drivers/net/davinci_emac.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index d84a36e545f6..33f3541aaf96 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -430,7 +430,7 @@ static bool i8042_filter(unsigned char data, unsigned char str,
 	}
 
 	if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
-		dbg("Filtered out by platfrom filter\n");
+		dbg("Filtered out by platform filter\n");
 		return true;
 	}
 
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 33c4fe26178c..ea49d6ec4cba 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2651,7 +2651,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata) {
-		printk(KERN_ERR "DaVinci EMAC: No platfrom data\n");
+		printk(KERN_ERR "DaVinci EMAC: No platform data\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3


From 9ddc5b6f18fbac07d2746566b73b89e89fdd4e6a Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Wed, 20 Jan 2010 17:02:24 +0100
Subject: tree-wide: fix typos "ammount" -> "amount"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/powerpc/mm/init_32.c            | 2 +-
 drivers/char/serial167.c             | 2 +-
 drivers/isdn/sc/hardware.h           | 2 +-
 drivers/message/i2o/iop.c            | 2 +-
 drivers/net/ks8851.c                 | 2 +-
 drivers/platform/x86/thinkpad_acpi.c | 4 ++--
 drivers/scsi/libfc/fc_fcp.c          | 2 +-
 drivers/serial/samsung.c             | 2 +-
 drivers/usb/serial/opticon.c         | 2 +-
 drivers/usb/serial/symbolserial.c    | 2 +-
 10 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 4ec900af332f..b1dbd9ee87cc 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -47,7 +47,7 @@
 #include "mmu_decl.h"
 
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
 #endif
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 452370af95de..aee3c0d1759f 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1990,7 +1990,7 @@ void mvme167_serial_console_setup(int cflag)
 	/*
 	 * Attempt to set up all channels to something reasonable, and
 	 * bang out a INIT_CHAN command.  We should then be able to limit
-	 * the ammount of fiddling we have to do in normal running.
+	 * the amount of fiddling we have to do in normal running.
 	 */
 
 	for (ch = 3; ch >= 0; ch--) {
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
index 9e6d5302bf8e..627324856ead 100644
--- a/drivers/isdn/sc/hardware.h
+++ b/drivers/isdn/sc/hardware.h
@@ -87,7 +87,7 @@
 #define BRI_CHANNELS	2		/* Number of B channels */
 #define BRI_BASEPG_VAL	0x98
 #define BRI_MAGIC	0x60000		/* Magic Number */
-#define BRI_MEMSIZE	0x10000		/* Ammount of RAM (64K) */
+#define BRI_MEMSIZE	0x10000		/* Amount of RAM (64K) */
 #define BRI_PARTNO	"72-029"
 #define BRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
 /*
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index e5ab62141503..ef5ce2676f05 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c)
 		 * which is indeterminate. We need to wait until the IOP has
 		 * rebooted before we can let the system talk to it. We read
 		 * the inbound Free_List until a message is available. If we
-		 * can't read one in the given ammount of time, we assume the
+		 * can't read one in the given amount of time, we assume the
 		 * IOP could not reboot properly.
 		 */
 		osm_debug("%s: Reset in progress, waiting for reboot...\n",
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 6d3ac65bc35c..cfebe0e218fc 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw)
  * @buff: The buffer address
  * @len: The length of the data to read
  *
- * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * Issue an RXQ FIFO read command and read the @len amount of data from
  * the FIFO into the buffer specified by @buff.
  */
 static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e67e4feb35cb..215621c31c5f 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1667,7 +1667,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv)
  * Table of recommended minimum BIOS versions
  *
  * Reasons for listing:
- *    1. Stable BIOS, listed because the unknown ammount of
+ *    1. Stable BIOS, listed because the unknown amount of
  *       bugs and bad ACPI behaviour on older versions
  *
  *    2. BIOS or EC fw with known bugs that trigger on Linux
@@ -7070,7 +7070,7 @@ static struct ibm_struct volume_driver_data = {
  *
  * 	Fan speed changes of any sort (including those caused by the
  * 	disengaged mode) are usually done slowly by the firmware as the
- * 	maximum ammount of fan duty cycle change per second seems to be
+ * 	maximum amount of fan duty cycle change per second seems to be
  * 	limited.
  *
  * 	Reading is not available if GFAN exists.
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 881d5dfe8c74..96ee599d9a05 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -522,7 +522,7 @@ crc_err:
  *
  * Called after receiving a Transfer Ready data descriptor.
  * If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
  * multiple frames of the maximum frame payload supported by
  * the target port.
  */
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df113ec0..03c010af966b 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 	unsigned long ufstat, utrstat;
 
 	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		/* fifo mode - check ammount of data in fifo registers... */
+		/* fifo mode - check amount of data in fifo registers... */
 
 		ufstat = rd_regl(port, S3C2410_UFSTAT);
 		return (ufstat & info->tx_fifofull) ? 0 : 1;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4cdb975caa89..96937f1b8b97 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -120,7 +120,7 @@ static void opticon_bulk_callback(struct urb *urb)
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index b282c0f2d8e5..aebfcf699644 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -100,7 +100,7 @@ static void symbol_int_callback(struct urb *urb)
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
-- 
cgit v1.2.3


From 551e378ca1852dc51609b722014416d4da0770c6 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 28 Jan 2010 16:11:51 +0800
Subject: tree-wide: s/widht/width/g typo in comments

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/m68k/include/asm/fbio.h  | 2 +-
 arch/sparc/include/asm/fbio.h | 2 +-
 drivers/net/skfp/ess.c        | 2 +-
 drivers/video/68328fb.c       | 2 +-
 drivers/video/pm2fb.c         | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h
index b9215a0907d3..0a21da87f7d6 100644
--- a/arch/m68k/include/asm/fbio.h
+++ b/arch/m68k/include/asm/fbio.h
@@ -173,7 +173,7 @@ struct mdi_cfginfo {
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
index b9215a0907d3..0a21da87f7d6 100644
--- a/arch/sparc/include/asm/fbio.h
+++ b/arch/sparc/include/asm/fbio.h
@@ -173,7 +173,7 @@ struct mdi_cfginfo {
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index a85efcfd9d0e..e8387d25f24a 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -557,7 +557,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 
 	/*
 	 * send never allocation request where the requested payload and
-	 * overhead is zero or deallocate bandwidht when no bandwidth is
+	 * overhead is zero or deallocate bandwidth when no bandwidth is
 	 * parsed
 	 */
 	if (!smc->mib.fddiESSPayload) {
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index 0b17824b0eb5..2110556f76b3 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -308,7 +308,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = RAMDAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    RAMDAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 36436ee6c1a4..27f93aab6ddc 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -896,7 +896,7 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = DAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    DAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
-- 
cgit v1.2.3


From a56ed41d94f80e4342116318754878a045835f40 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Fri, 5 Feb 2010 02:47:28 +0000
Subject: net: 8139cp: convert to use mc helpers

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/8139cp.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 9d59654748b1..60bc0b0ad4f3 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -899,7 +899,7 @@ static void __cp_set_rx_mode (struct net_device *dev)
 {
 	struct cp_private *cp = netdev_priv(dev);
 	u32 mc_filter[2];	/* Multicast hash filter */
-	int i, rx_mode;
+	int rx_mode;
 	u32 tmp;
 
 	/* Note: do not reorder, GCC is clever about common statements. */
@@ -909,7 +909,7 @@ static void __cp_set_rx_mode (struct net_device *dev)
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
@@ -918,8 +918,7 @@ static void __cp_set_rx_mode (struct net_device *dev)
 		struct dev_mc_list *mclist;
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-- 
cgit v1.2.3


From 6d55ad4a534e7de3417819c6e894ff1c0a38f626 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Fri, 5 Feb 2010 02:48:11 +0000
Subject: net: 8139too: convert to use mc helpers

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/8139too.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 321e73aabb2b..c7d6f094cc7a 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -2509,7 +2509,7 @@ static void __set_rx_mode (struct net_device *dev)
 	struct rtl8139_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 	u32 mc_filter[2];	/* Multicast hash filter */
-	int i, rx_mode;
+	int rx_mode;
 	u32 tmp;
 
 	pr_debug("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
@@ -2521,7 +2521,7 @@ static void __set_rx_mode (struct net_device *dev)
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
@@ -2530,8 +2530,7 @@ static void __set_rx_mode (struct net_device *dev)
 		struct dev_mc_list *mclist;
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
-- 
cgit v1.2.3


From 2cc04d27c497af9e8d11181fa8ddef9c99592c78 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Fri, 5 Feb 2010 02:51:24 +0000
Subject: net: dm9601: convert to use mc helpers

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/dm9601.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 3d406f9b2f29..c820fec62041 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -381,13 +381,13 @@ static void dm9601_set_multicast(struct net_device *net)
 
 	if (net->flags & IFF_PROMISC) {
 		rx_ctl |= 0x02;
-	} else if (net->flags & IFF_ALLMULTI || net->mc_count > DM_MAX_MCAST) {
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > DM_MAX_MCAST) {
 		rx_ctl |= 0x04;
-	} else if (net->mc_count) {
-		struct dev_mc_list *mc_list = net->mc_list;
-		int i;
+	} else if (!netdev_mc_empty(net)) {
+		struct dev_mc_list *mc_list;
 
-		for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
+		netdev_for_each_mc_addr(mc_list, net) {
 			u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
 			hashes[crc >> 3] |= 1 << (crc & 0x7);
 		}
-- 
cgit v1.2.3


From 7aeef972cce30b0ab04047e07918b04d867e7a29 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Fri, 5 Feb 2010 02:52:39 +0000
Subject: net: e1000e: convert to use mc helpers

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/netdev.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ffa37c682a00..88d54d3efcef 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2589,21 +2589,16 @@ static void e1000_set_multi(struct net_device *netdev)
 
 	ew32(RCTL, rctl);
 
-	if (netdev->mc_count) {
-		mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC);
+	if (!netdev_mc_empty(netdev)) {
+		mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
 		if (!mta_list)
 			return;
 
 		/* prepare a packed array of only addresses. */
-		mc_ptr = netdev->mc_list;
-
-		for (i = 0; i < netdev->mc_count; i++) {
-			if (!mc_ptr)
-				break;
-			memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr,
-			       ETH_ALEN);
-			mc_ptr = mc_ptr->next;
-		}
+		i = 0;
+		netdev_for_each_mc_addr(mc_ptr, netdev)
+			memcpy(mta_list + (i++ * ETH_ALEN),
+			       mc_ptr->dmi_addr, ETH_ALEN);
 
 		e1000_update_mc_addr_list(hw, mta_list, i);
 		kfree(mta_list);
-- 
cgit v1.2.3


From 098dfded5b1b09927995e89c6d689f85a0f53384 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 5 Feb 2010 11:40:00 -0800
Subject: iwlwifi: Fix to set correct ht configuration

iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause
possible incorrect ht configuration. Adding the call in iwl_mac_config() if
IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon
command.

Fixes
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 5461f105bd2d..d10bea64fce3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2744,6 +2744,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
 			priv->staging_rxon.flags = 0;
 
+		iwl_set_rxon_ht(priv, ht_conf);
 		iwl_set_rxon_channel(priv, conf->channel);
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
-- 
cgit v1.2.3


From 690680360cd22b55235481ca3421a3450a96138a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 3 Feb 2010 10:47:55 +0100
Subject: mac80211_hwsim: add fake hw scan handler

For debugging hardware scan trigger/complete
functionality, it was useful to have code in
hwsim that pretends to do a hardware scan.

This code could be extended to actually do the
scan, but for now it was sufficient for me to
only pretend. Since hwsim was written to ease
debugging, it only makes sense to add it to it
permanently.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 44 ++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 0dbda8dfbd99..00ffe6dd435e 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -32,6 +32,10 @@ static int radios = 2;
 module_param(radios, int, 0444);
 MODULE_PARM_DESC(radios, "Number of simulated radios");
 
+static bool fake_hw_scan;
+module_param(fake_hw_scan, bool, 0444);
+MODULE_PARM_DESC(fake_hw_scan, "Install fake (no-op) hw-scan handler");
+
 /**
  * enum hwsim_regtest - the type of regulatory tests we offer
  *
@@ -908,8 +912,43 @@ static void mac80211_hwsim_flush(struct ieee80211_hw *hw, bool drop)
 	 */
 }
 
+struct hw_scan_done {
+	struct delayed_work w;
+	struct ieee80211_hw *hw;
+};
 
-static const struct ieee80211_ops mac80211_hwsim_ops =
+static void hw_scan_done(struct work_struct *work)
+{
+	struct hw_scan_done *hsd =
+		container_of(work, struct hw_scan_done, w.work);
+
+	ieee80211_scan_completed(hsd->hw, false);
+	kfree(hsd);
+}
+
+static int mac80211_hwsim_hw_scan(struct ieee80211_hw *hw,
+				  struct cfg80211_scan_request *req)
+{
+	struct hw_scan_done *hsd = kzalloc(sizeof(*hsd), GFP_KERNEL);
+	int i;
+
+	if (!hsd)
+		return -ENOMEM;
+
+	hsd->hw = hw;
+	INIT_DELAYED_WORK(&hsd->w, hw_scan_done);
+
+	printk(KERN_DEBUG "hwsim scan request\n");
+	for (i = 0; i < req->n_channels; i++)
+		printk(KERN_DEBUG "hwsim scan freq %d\n",
+			req->channels[i]->center_freq);
+
+	ieee80211_queue_delayed_work(hw, &hsd->w, 2 * HZ);
+
+	return 0;
+}
+
+static struct ieee80211_ops mac80211_hwsim_ops =
 {
 	.tx = mac80211_hwsim_tx,
 	.start = mac80211_hwsim_start,
@@ -1119,6 +1158,9 @@ static int __init init_mac80211_hwsim(void)
 	if (radios < 1 || radios > 100)
 		return -EINVAL;
 
+	if (fake_hw_scan)
+		mac80211_hwsim_ops.hw_scan = mac80211_hwsim_hw_scan;
+
 	spin_lock_init(&hwsim_radio_lock);
 	INIT_LIST_HEAD(&hwsim_radios);
 
-- 
cgit v1.2.3


From 1a20034a73a40b8056731f9db0c535cec2961eb7 Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Wed, 3 Feb 2010 22:50:18 +0530
Subject: ath9k: configure the beacon only if the STA is associated

beacons configuration SHOULD be done only if the STA is associated.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 422454fe4ff0..d088ebfe63a6 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -577,6 +577,13 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	u64 tsf;
 	int num_beacons, offset, dtim_dec_count, cfp_dec_count;
 
+	/* No need to configure beacon if we are not associated */
+	if (!common->curaid) {
+		ath_print(common, ATH_DBG_BEACON,
+			 "STA is not yet associated..skipping beacon config\n");
+		return;
+	}
+
 	memset(&bs, 0, sizeof(bs));
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
 
@@ -739,7 +746,6 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 	enum nl80211_iftype iftype;
 
 	/* Setup the beacon configuration parameters */
-
 	if (vif) {
 		struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
 
-- 
cgit v1.2.3


From 3f7c5c10e9dc6bf90179eb9f7c06151d508fb324 Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Wed, 3 Feb 2010 22:51:13 +0530
Subject: ath9k: Enable TIM timer interrupt only when needed.

The TIM timer interrupt is enabled even before the ACK of nullqos
is received which is unnecessary.

Also clean up the CONF_PS part of config callback properly for
better readability.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
 drivers/net/wireless/ath/ath9k/main.c  | 24 ++++++++++++++----------
 drivers/net/wireless/ath/ath9k/xmit.c  |  7 +++----
 3 files changed, 18 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 0ea340fd071c..83c7ea4c007f 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -267,6 +267,7 @@ void ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 		       u16 tid, u16 *ssn);
 void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
 void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
+void ath9k_enable_ps(struct ath_softc *sc);
 
 /********/
 /* VIFs */
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6796d5cdc293..40da7a6e4b6b 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1492,6 +1492,19 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	mutex_unlock(&sc->mutex);
 }
 
+void ath9k_enable_ps(struct ath_softc *sc)
+{
+	sc->ps_enabled = true;
+	if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+		if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
+			sc->imask |= ATH9K_INT_TIM_TIMER;
+			ath9k_hw_set_interrupts(sc->sc_ah,
+					sc->imask);
+		}
+	}
+	ath9k_hw_setrxabort(sc->sc_ah, 1);
+}
+
 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath_wiphy *aphy = hw->priv;
@@ -1546,22 +1559,13 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
 			sc->ps_flags |= PS_ENABLED;
-			if (!(ah->caps.hw_caps &
-			      ATH9K_HW_CAP_AUTOSLEEP)) {
-				if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
-					sc->imask |= ATH9K_INT_TIM_TIMER;
-					ath9k_hw_set_interrupts(sc->sc_ah,
-							sc->imask);
-				}
-			}
 			/*
 			 * At this point we know hardware has received an ACK
 			 * of a previously sent null data frame.
 			 */
 			if ((sc->ps_flags & PS_NULLFUNC_COMPLETED)) {
 				sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
-				sc->ps_enabled = true;
-				ath9k_hw_setrxabort(sc->sc_ah, 1);
+				ath9k_enable_ps(sc);
                         }
 		} else {
 			sc->ps_enabled = false;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3c790a4f38f7..f5cbbcb9a4aa 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2048,10 +2048,9 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		 */
 		if (bf->bf_isnullfunc &&
 		    (ds->ds_txstat.ts_status & ATH9K_TX_ACKED)) {
-			if ((sc->ps_flags & PS_ENABLED)) {
-				sc->ps_enabled = true;
-				ath9k_hw_setrxabort(sc->sc_ah, 1);
-			} else
+			if ((sc->ps_flags & PS_ENABLED))
+				ath9k_enable_ps(sc);
+			else
 				sc->ps_flags |= PS_NULLFUNC_COMPLETED;
 		}
 
-- 
cgit v1.2.3


From 0866b03c7d7dee8a34ffa527ecda426c0f405518 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 3 Feb 2010 13:33:44 -0600
Subject: b43/b43legacy: Wake queues in wireless_core_start

If b43 or b43legacy are deauthenticated or disconnected, there is a
possibility that a reconnection is tried with the queues stopped in
mac80211. To prevent this, start the queues before setting
STAT_INITIALIZED.

In b43, a similar change has been in place (twice) in the
wireless_core_init() routine. Remove the duplicate and add similar
code to b43legacy.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>   [2.6.32]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c       | 3 +--
 drivers/net/wireless/b43legacy/main.c | 2 ++
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ddd15c52b346..3c5143b935f2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3987,6 +3987,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
 	}
 
 	/* We are ready to run. */
+	ieee80211_wake_queues(dev->wl->hw);
 	b43_set_status(dev, B43_STAT_STARTED);
 
 	/* Start data flow (TX/RX). */
@@ -4396,8 +4397,6 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 
 	ieee80211_wake_queues(dev->wl->hw);
 
-	ieee80211_wake_queues(dev->wl->hw);
-
 	b43_set_status(dev, B43_STAT_INITIALIZED);
 
 out:
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 174ac6bde2b1..b4e89a35e3fb 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2923,6 +2923,7 @@ static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev)
 		goto out;
 	}
 	/* We are ready to run. */
+	ieee80211_wake_queues(dev->wl->hw);
 	b43legacy_set_status(dev, B43legacy_STAT_STARTED);
 
 	/* Start data flow (TX/RX) */
@@ -3343,6 +3344,7 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
 	b43legacy_security_init(dev);
 	b43legacy_rng_init(wl);
 
+	ieee80211_wake_queues(dev->wl->hw);
 	b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
 
 	b43legacy_leds_init(dev);
-- 
cgit v1.2.3


From 371ba88322ea5750ad411fdef7674dcee50f7235 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 3 Feb 2010 15:31:07 -0800
Subject: libertas/if_spi: needs linux/semaphore.h

libertas/if_spi.c needs to #include linux/semaphore.h to fix build errors:

drivers/net/wireless/libertas/if_spi.c:59: error: field 'spi_ready' has incomplete type
drivers/net/wireless/libertas/if_spi.c:60: error: field 'spi_thread_terminated' has incomplete type
drivers/net/wireless/libertas/if_spi.c:785: error: implicit declaration of function 'down_interruptible'
drivers/net/wireless/libertas/if_spi.c:787: error: implicit declaration of function 'up'
drivers/net/wireless/libertas/if_spi.c:834: error: implicit declaration of function 'down'
drivers/net/wireless/libertas/if_spi.c:943: error: implicit declaration of function 'sema_init'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/if_spi.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index bf4bfbae6227..3ea03f259ee7 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -23,6 +23,7 @@
 #include <linux/kthread.h>
 #include <linux/list.h>
 #include <linux/netdevice.h>
+#include <linux/semaphore.h>
 #include <linux/spi/libertas_spi.h>
 #include <linux/spi/spi.h>
 
-- 
cgit v1.2.3


From 67cbc3ed5b96a5acfddae142fa0e2adb1b6270d5 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 4 Feb 2010 12:23:08 +0100
Subject: b43: N-PHY: implement overriding RF control intc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 117 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 109 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 6392da25efed..8992457b0c0b 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -68,6 +68,10 @@ static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
 					u8 *events, u8 *delays, u8 length);
 static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
 				       enum b43_nphy_rf_sequence seq);
+static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
+						u16 value, u8 core, bool off);
+static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
+						u16 value, u8 core);
 
 void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
 {//TODO
@@ -498,8 +502,8 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
 		b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0007);
 	}
 
-	/* TODO: Call N PHY RF Ctrl Intc Override with 2, 0, 3 as arguments */
-	/* TODO: Call N PHY RF Intc Override with 8, 0, 3, 0 as arguments */
+	b43_nphy_rf_control_intc_override(dev, 2, 0, 3);
+	b43_nphy_rf_control_override(dev, 8, 0, 3, false);
 	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
 
 	if (core == 0) {
@@ -509,9 +513,8 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
 		rxval = 4;
 		txval = 2;
 	}
-
-	/* TODO: Call N PHY RF Ctrl Intc Override with 1, rxval, (core + 1) */
-	/* TODO: Call N PHY RF Ctrl Intc Override with 1, txval, (2 - core) */
+	b43_nphy_rf_control_intc_override(dev, 1, rxval, (core + 1));
+	b43_nphy_rf_control_intc_override(dev, 1, txval, (2 - core));
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalcRxIqComp */
@@ -1264,6 +1267,104 @@ static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlIntcOverride */
+static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
+						u16 value, u8 core)
+{
+	u8 i, j;
+	u16 reg, tmp, val;
+
+	B43_WARN_ON(dev->phy.rev < 3);
+	B43_WARN_ON(field > 4);
+
+	for (i = 0; i < 2; i++) {
+		if ((core == 1 && i == 1) || (core == 2 && !i))
+			continue;
+
+		reg = (i == 0) ?
+			B43_NPHY_RFCTL_INTC1 : B43_NPHY_RFCTL_INTC2;
+		b43_phy_mask(dev, reg, 0xFBFF);
+
+		switch (field) {
+		case 0:
+			b43_phy_write(dev, reg, 0);
+			b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+			break;
+		case 1:
+			if (!i) {
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_INTC1,
+						0xFC3F, (value << 6));
+				b43_phy_maskset(dev, B43_NPHY_TXF_40CO_B1S1,
+						0xFFFE, 1);
+				b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
+						B43_NPHY_RFCTL_CMD_START);
+				for (j = 0; j < 100; j++) {
+					if (b43_phy_read(dev, B43_NPHY_RFCTL_CMD) & B43_NPHY_RFCTL_CMD_START) {
+						j = 0;
+						break;
+					}
+					udelay(10);
+				}
+				if (j)
+					b43err(dev->wl,
+						"intc override timeout\n");
+				b43_phy_mask(dev, B43_NPHY_TXF_40CO_B1S1,
+						0xFFFE);
+			} else {
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_INTC2,
+						0xFC3F, (value << 6));
+				b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
+						0xFFFE, 1);
+				b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
+						B43_NPHY_RFCTL_CMD_RXTX);
+				for (j = 0; j < 100; j++) {
+					if (b43_phy_read(dev, B43_NPHY_RFCTL_CMD) & B43_NPHY_RFCTL_CMD_RXTX) {
+						j = 0;
+						break;
+					}
+					udelay(10);
+				}
+				if (j)
+					b43err(dev->wl,
+						"intc override timeout\n");
+				b43_phy_mask(dev, B43_NPHY_RFCTL_OVER,
+						0xFFFE);
+			}
+			break;
+		case 2:
+			if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+				tmp = 0x0020;
+				val = value << 5;
+			} else {
+				tmp = 0x0010;
+				val = value << 4;
+			}
+			b43_phy_maskset(dev, reg, ~tmp, val);
+			break;
+		case 3:
+			if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+				tmp = 0x0001;
+				val = value;
+			} else {
+				tmp = 0x0004;
+				val = value << 2;
+			}
+			b43_phy_maskset(dev, reg, ~tmp, val);
+			break;
+		case 4:
+			if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+				tmp = 0x0002;
+				val = value << 1;
+			} else {
+				tmp = 0x0008;
+				val = value << 3;
+			}
+			b43_phy_maskset(dev, reg, ~tmp, val);
+			break;
+		}
+	}
+}
+
 static void b43_nphy_bphy_init(struct b43_wldev *dev)
 {
 	unsigned int i;
@@ -2161,9 +2262,9 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 		regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
 		regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
 
-		/* TODO: Call N PHY RF Ctrl Intc Override with 2, 1, 3 */
-		/* TODO: Call N PHY RF Ctrl Intc Override with 1, 2, 1 */
-		/* TODO: Call N PHY RF Ctrl Intc Override with 1, 8, 2 */
+		b43_nphy_rf_control_intc_override(dev, 2, 1, 3);
+		b43_nphy_rf_control_intc_override(dev, 1, 2, 1);
+		b43_nphy_rf_control_intc_override(dev, 1, 8, 2);
 
 		regs[9] = b43_phy_read(dev, B43_NPHY_PAPD_EN0);
 		regs[10] = b43_phy_read(dev, B43_NPHY_PAPD_EN1);
-- 
cgit v1.2.3


From 984ff4ffb7fa36b9ac440a3802fd19658eccc84e Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 4 Feb 2010 12:23:10 +0100
Subject: b43: N-PHY: prepare code for reapplying TX cal coeffs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8992457b0c0b..3dd22bc527d0 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -2587,6 +2587,39 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 	return error;
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ReapplyTxCalCoeffs */
+static void b43_nphy_reapply_tx_cal_coeffs(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u8 i;
+	u16 buffer[7];
+	bool equal = true;
+
+	if (!nphy->txiqlocal_coeffsvalid || 1 /* FIXME */)
+		return;
+
+	b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 7, buffer);
+	for (i = 0; i < 4; i++) {
+		if (buffer[i] != nphy->txiqlocal_bestc[i]) {
+			equal = false;
+			break;
+		}
+	}
+
+	if (!equal) {
+		b43_ntab_write_bulk(dev, B43_NTAB16(15, 80), 4,
+					nphy->txiqlocal_bestc);
+		for (i = 0; i < 4; i++)
+			buffer[i] = 0;
+		b43_ntab_write_bulk(dev, B43_NTAB16(15, 88), 4,
+					buffer);
+		b43_ntab_write_bulk(dev, B43_NTAB16(15, 85), 2,
+					&nphy->txiqlocal_bestc[5]);
+		b43_ntab_write_bulk(dev, B43_NTAB16(15, 93), 2,
+					&nphy->txiqlocal_bestc[5]);
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIqRev2 */
 static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 			struct nphy_txgains target, u8 type, bool debug)
@@ -2617,7 +2650,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 	b43_nphy_stay_in_carrier_search(dev, 1);
 
 	if (dev->phy.rev < 2)
-		;/* TODO: Call N PHY Reapply TX Cal Coeffs */
+		b43_nphy_reapply_tx_cal_coeffs(dev);
 	b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, gain_save);
 	for (i = 0; i < 2; i++) {
 		b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
-- 
cgit v1.2.3


From bbc6dc121de92dee506e359eeb9b1d3973d0740a Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 4 Feb 2010 12:23:11 +0100
Subject: b43: N-PHY: save calibration for further restore
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 51 +++++++++++++++++++++++++++++++++++++++-
 drivers/net/wireless/b43/phy_n.h |  1 +
 2 files changed, 51 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3dd22bc527d0..b332ffbe59d8 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -2295,6 +2295,55 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SaveCal */
+static void b43_nphy_save_cal(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	struct b43_phy_n_iq_comp *rxcal_coeffs = NULL;
+	u16 *txcal_radio_regs = NULL;
+	u8 *iqcal_chanspec;
+	u16 *table = NULL;
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		rxcal_coeffs = &nphy->cal_cache.rxcal_coeffs_2G;
+		txcal_radio_regs = nphy->cal_cache.txcal_radio_regs_2G;
+		iqcal_chanspec = &nphy->iqcal_chanspec_2G;
+		table = nphy->cal_cache.txcal_coeffs_2G;
+	} else {
+		rxcal_coeffs = &nphy->cal_cache.rxcal_coeffs_5G;
+		txcal_radio_regs = nphy->cal_cache.txcal_radio_regs_5G;
+		iqcal_chanspec = &nphy->iqcal_chanspec_5G;
+		table = nphy->cal_cache.txcal_coeffs_5G;
+	}
+
+	b43_nphy_rx_iq_coeffs(dev, false, rxcal_coeffs);
+	/* TODO use some definitions */
+	if (dev->phy.rev >= 3) {
+		txcal_radio_regs[0] = b43_radio_read(dev, 0x2021);
+		txcal_radio_regs[1] = b43_radio_read(dev, 0x2022);
+		txcal_radio_regs[2] = b43_radio_read(dev, 0x3021);
+		txcal_radio_regs[3] = b43_radio_read(dev, 0x3022);
+		txcal_radio_regs[4] = b43_radio_read(dev, 0x2023);
+		txcal_radio_regs[5] = b43_radio_read(dev, 0x2024);
+		txcal_radio_regs[6] = b43_radio_read(dev, 0x3023);
+		txcal_radio_regs[7] = b43_radio_read(dev, 0x3024);
+	} else {
+		txcal_radio_regs[0] = b43_radio_read(dev, 0x8B);
+		txcal_radio_regs[1] = b43_radio_read(dev, 0xBA);
+		txcal_radio_regs[2] = b43_radio_read(dev, 0x8D);
+		txcal_radio_regs[3] = b43_radio_read(dev, 0xBC);
+	}
+	*iqcal_chanspec = nphy->radio_chanspec;
+	b43_ntab_write_bulk(dev, B43_NTAB16(15, 80), 8, table);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal */
 static void b43_nphy_restore_cal(struct b43_wldev *dev)
 {
@@ -2992,7 +3041,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 
 	if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) {
 		if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
-			;/* Call N PHY Save Cal */
+			b43_nphy_save_cal(dev);
 		else if (nphy->mphase_cal_phase_id == 0)
 			;/* N PHY Periodic Calibration with argument 3 */
 	} else {
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index ae82f0fc2096..0400a2cb76a9 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -975,6 +975,7 @@ struct b43_phy_n {
 	u16 papd_epsilon_offset[2];
 	s32 preamble_override;
 	u32 bb_mult_save;
+	u16 radio_chanspec;
 
 	bool gain_boost;
 	bool elna_gain_config;
-- 
cgit v1.2.3


From 9442e5b58edb4a108ec5aae420a6fff3a63acab0 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 4 Feb 2010 12:23:12 +0100
Subject: b43: N-PHY: partly implement SPUR workaround
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 64 +++++++++++++++++++++++++++++++++++++++-
 drivers/net/wireless/b43/phy_n.h |  3 ++
 2 files changed, 66 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index b332ffbe59d8..74642d43e1ff 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -717,6 +717,67 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SpurWar */
+static void b43_nphy_spur_workaround(struct b43_wldev *dev)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+
+	unsigned int channel;
+	int tone[2] = { 57, 58 };
+	u32 noise[2] = { 0x3FF, 0x3FF };
+
+	B43_WARN_ON(dev->phy.rev < 3);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	/* FIXME: channel = radio_chanspec */
+
+	if (nphy->gband_spurwar_en) {
+		/* TODO: N PHY Adjust Analog Pfbw (7) */
+		if (channel == 11 && dev->phy.is_40mhz)
+			; /* TODO: N PHY Adjust Min Noise Var(2, tone, noise)*/
+		else
+			; /* TODO: N PHY Adjust Min Noise Var(0, NULL, NULL)*/
+		/* TODO: N PHY Adjust CRS Min Power (0x1E) */
+	}
+
+	if (nphy->aband_spurwar_en) {
+		if (channel == 54) {
+			tone[0] = 0x20;
+			noise[0] = 0x25F;
+		} else if (channel == 38 || channel == 102 || channel == 118) {
+			if (0 /* FIXME */) {
+				tone[0] = 0x20;
+				noise[0] = 0x21F;
+			} else {
+				tone[0] = 0;
+				noise[0] = 0;
+			}
+		} else if (channel == 134) {
+			tone[0] = 0x20;
+			noise[0] = 0x21F;
+		} else if (channel == 151) {
+			tone[0] = 0x10;
+			noise[0] = 0x23F;
+		} else if (channel == 153 || channel == 161) {
+			tone[0] = 0x30;
+			noise[0] = 0x23F;
+		} else {
+			tone[0] = 0;
+			noise[0] = 0;
+		}
+
+		if (!tone[0] && !noise[0])
+			; /* TODO: N PHY Adjust Min Noise Var(1, tone, noise)*/
+		else
+			; /* TODO: N PHY Adjust Min Noise Var(0, NULL, NULL)*/
+	}
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
 static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev)
 {
@@ -3055,7 +3116,8 @@ int b43_phy_initn(struct b43_wldev *dev)
 	if (phy->rev >= 3 && phy->rev <= 6)
 		b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x0014);
 	b43_nphy_tx_lp_fbw(dev);
-	/* TODO N PHY Spur Workaround */
+	if (phy->rev >= 3)
+		b43_nphy_spur_workaround(dev);
 
 	b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
 	return 0;
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 0400a2cb76a9..403aad3f894f 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -1002,6 +1002,9 @@ struct b43_phy_n {
 	u16 classifier_state;
 	u16 clip_state[2];
 
+	bool aband_spurwar_en;
+	bool gband_spurwar_en;
+
 	bool ipa2g_on;
 	u8 iqcal_chanspec_2G;
 	u8 rssical_chanspec_2G;
-- 
cgit v1.2.3


From 5f6393ecf5cc7d064ba9172e0a2e1c64bcaaaf2f Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 4 Feb 2010 13:08:08 +0100
Subject: b43: N-PHY: load generated samples
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 74642d43e1ff..074b34c3b383 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1017,6 +1017,33 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/LoadSampleTable */
+static int b43_nphy_load_samples(struct b43_wldev *dev,
+					struct b43_c32 *samples, u16 len) {
+	struct b43_phy_n *nphy = dev->phy.n;
+	u16 i;
+	u32 *data;
+
+	data = kzalloc(len * sizeof(u32), GFP_KERNEL);
+	if (!data) {
+		b43err(dev->wl, "allocation for samples loading failed\n");
+		return -ENOMEM;
+	}
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	for (i = 0; i < len; i++) {
+		data[i] = (samples[i].i & 0x3FF << 10);
+		data[i] |= samples[i].q & 0x3FF;
+	}
+	b43_ntab_write_bulk(dev, B43_NTAB32(17, 0), len, data);
+
+	kfree(data);
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
+	return 0;
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GenLoadSamples */
 static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 					bool test)
@@ -1052,9 +1079,9 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 		samples[i].i = CORDIC_CONVERT(samples[i].i * max);
 	}
 
-	/* TODO: Call N PHY Load Sample Table with buffer, len as arguments */
+	i = b43_nphy_load_samples(dev, samples, len);
 	kfree(samples);
-	return len;
+	return (i < 0) ? 0 : len;
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RunSamples */
-- 
cgit v1.2.3


From 40bd5203ddb6b946b55c35d1c26dfe9ec1b232f5 Mon Sep 17 00:00:00 2001
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 4 Feb 2010 13:11:54 +0100
Subject: b43: N-PHY: handle allocation fail in samples generation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/phy_n.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 074b34c3b383..795bb1e3345d 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1069,6 +1069,10 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
 	}
 
 	samples = kzalloc(len * sizeof(struct b43_c32), GFP_KERNEL);
+	if (!samples) {
+		b43err(dev->wl, "allocation for samples generation failed\n");
+		return 0;
+	}
 	rot = (((freq * 36) / bw) << 16) / 100;
 	angle = 0;
 
-- 
cgit v1.2.3


From 85359499eec796e784e2f1e3d7bbb31d84dd4c2b Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 4 Feb 2010 15:33:25 +0200
Subject: wl1251: fix txop unit

mac80211 uses unit units of 32 usec with txop but wl1251_acx_ac_cfg()
expects it to be usecs. This fortunately didn't cause any severe problems,
only that firmware was using incorrect WMM settings.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index a717dde4822e..24ae6a360ac8 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1144,9 +1144,10 @@ static int wl1251_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	if (ret < 0)
 		goto out;
 
+	/* mac80211 uses units of 32 usec */
 	ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
 				params->cw_min, params->cw_max,
-				params->aifs, params->txop);
+				params->aifs, params->txop * 32);
 	if (ret < 0)
 		goto out_sleep;
 
-- 
cgit v1.2.3


From 40e6fa829a2544c9f8fd5a94844fe502334d6afc Mon Sep 17 00:00:00 2001
From: Holger Schurig <holgerschurig@gmail.com>
Date: Thu, 4 Feb 2010 14:37:45 +0100
Subject: libertas: don't retry commands

Retrying commands seldomly works, most often the firmware is in a
weird state anyway and needs the device to reset. So it's better
to report the broken state back to user-space.

Also rename command_timer_fn() into lbs_cmd_timeout_handler(),
which better reflect it's usage.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/cmdresp.c |  5 -----
 drivers/net/wireless/libertas/dev.h     |  1 -
 drivers/net/wireless/libertas/main.c    | 31 +++++++------------------------
 3 files changed, 7 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 0334a58820ee..e7470442f76b 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -240,11 +240,6 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
 	/* Now we got response from FW, cancel the command timer */
 	del_timer(&priv->command_timer);
 	priv->cmd_timed_out = 0;
-	if (priv->nr_retries) {
-		lbs_pr_info("Received result %x to command %x after %d retries\n",
-			    result, curcmd, priv->nr_retries);
-		priv->nr_retries = 0;
-	}
 
 	/* Store the response code to cur_cmd_retcode. */
 	priv->cur_cmd_retcode = result;
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index d5a9dcae4059..efb2519d9d74 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -109,7 +109,6 @@ struct lbs_private {
 	struct list_head cmdpendingq; /* pending command buffers */
 	wait_queue_head_t cmd_pending;
 	struct timer_list command_timer;
-	int nr_retries;
 	int cmd_timed_out;
 
 	/* Command responses sent from the hardware to the driver */
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index f9f195f7b17c..f5d641efd50a 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -533,31 +533,14 @@ static int lbs_thread(void *data)
 		if (priv->cmd_timed_out && priv->cur_cmd) {
 			struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
 
-			if (++priv->nr_retries > 3) {
-				lbs_pr_info("Excessive timeouts submitting "
-					"command 0x%04x\n",
-					le16_to_cpu(cmdnode->cmdbuf->command));
-				lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
-				priv->nr_retries = 0;
-				if (priv->reset_card)
-					priv->reset_card(priv);
-			} else {
-				priv->cur_cmd = NULL;
-				priv->dnld_sent = DNLD_RES_RECEIVED;
-				lbs_pr_info("requeueing command 0x%04x due "
-					"to timeout (#%d)\n",
-					le16_to_cpu(cmdnode->cmdbuf->command),
-					priv->nr_retries);
-
-				/* Stick it back at the _top_ of the pending queue
-				   for immediate resubmission */
-				list_add(&cmdnode->list, &priv->cmdpendingq);
-			}
+			lbs_pr_info("Timeout submitting command 0x%04x\n",
+				le16_to_cpu(cmdnode->cmdbuf->command));
+			lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
+			if (priv->reset_card)
+				priv->reset_card(priv);
 		}
 		priv->cmd_timed_out = 0;
 
-
-
 		if (!priv->fw_ready)
 			continue;
 
@@ -729,7 +712,7 @@ done:
  *  This function handles the timeout of command sending.
  *  It will re-send the same command again.
  */
-static void command_timer_fn(unsigned long data)
+static void lbs_cmd_timeout_handler(unsigned long data)
 {
 	struct lbs_private *priv = (struct lbs_private *)data;
 	unsigned long flags;
@@ -848,7 +831,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
 
 	mutex_init(&priv->lock);
 
-	setup_timer(&priv->command_timer, command_timer_fn,
+	setup_timer(&priv->command_timer, lbs_cmd_timeout_handler,
 		(unsigned long)priv);
 	setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn,
 			(unsigned long)priv);
-- 
cgit v1.2.3


From d4fe5ac9e04e6e175a7bd7e29844b351533be591 Mon Sep 17 00:00:00 2001
From: Ben Cahill <ben.m.cahill@intel.com>
Date: Fri, 5 Feb 2010 11:33:46 -0800
Subject: iwlwifi: Add chain noise scaling factor

6x50 device requires a different scaling factor for Rx gain values sent to
device via PHY_CALIBRATION_CMD (CHAIN_NOISE_GAIN_CMD).  Rather than create
a new iwlXXXX_gain_computation() function, add new chain_noise_scale member
to struct iwl_cfg, and keep using iwl5000_gain_computation().

Signed-off-by: Ben Cahill <ben.m.cahill@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c |  2 ++
 drivers/net/wireless/iwlwifi/iwl-5000.c | 21 +++++++++++++++++++--
 drivers/net/wireless/iwlwifi/iwl-6000.c |  6 ++++++
 drivers/net/wireless/iwlwifi/iwl-core.h |  1 +
 4 files changed, 28 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 9d1820676f30..694ceef88590 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -247,6 +247,7 @@ struct iwl_cfg iwl1000_bgn_cfg = {
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl1000_bg_cfg = {
@@ -274,6 +275,7 @@ struct iwl_cfg iwl1000_bg_cfg = {
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 6d5988901341..f3d662c8cbcf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -179,14 +179,24 @@ static void iwl5000_gain_computation(struct iwl_priv *priv,
 			data->delta_gain_code[i] = 0;
 			continue;
 		}
-		delta_g = (1000 * ((s32)average_noise[default_chain] -
+
+		delta_g = (priv->cfg->chain_noise_scale *
+			((s32)average_noise[default_chain] -
 			(s32)average_noise[i])) / 1500;
+
 		/* bound gain by 2 bits value max, 3rd bit is sign */
 		data->delta_gain_code[i] =
 			min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
 
 		if (delta_g < 0)
-			/* set negative sign */
+			/*
+			 * set negative sign ...
+			 * note to Intel developers:  This is uCode API format,
+			 *   not the format of any internal device registers.
+			 *   Do not change this format for e.g. 6050 or similar
+			 *   devices.  Change format only if more resolution
+			 *   (i.e. more than 2 bits magnitude) is needed.
+			 */
 			data->delta_gain_code[i] |= (1 << 2);
 	}
 
@@ -1587,6 +1597,7 @@ struct iwl_cfg iwl5300_agn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl5100_bgn_cfg = {
@@ -1612,6 +1623,7 @@ struct iwl_cfg iwl5100_bgn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
@@ -1635,6 +1647,7 @@ struct iwl_cfg iwl5100_abg_cfg = {
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
@@ -1660,6 +1673,7 @@ struct iwl_cfg iwl5100_agn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -1685,6 +1699,7 @@ struct iwl_cfg iwl5350_agn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl5150_agn_cfg = {
@@ -1710,6 +1725,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl5150_abg_cfg = {
@@ -1733,6 +1749,7 @@ struct iwl_cfg iwl5150_abg_cfg = {
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index a9f8551e0e40..17198253b0bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -324,6 +324,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl6000i_2abg_cfg = {
@@ -354,6 +355,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = {
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl6000i_2bg_cfg = {
@@ -384,6 +386,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -415,6 +418,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1500,
 };
 
 struct iwl_cfg iwl6050_2abg_cfg = {
@@ -445,6 +449,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1500,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -476,6 +481,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index ec1fe1d7cc9a..49795b90246d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -293,6 +293,7 @@ struct iwl_cfg {
 	bool support_ct_kill_exit;
 	const bool support_wimax_coexist;
 	u8 plcp_delta_threshold;
+	s32 chain_noise_scale;
 };
 
 /***************************
-- 
cgit v1.2.3


From ed56a3f15a0561e900957ecca0dee42b9b453a9e Mon Sep 17 00:00:00 2001
From: Ben Cahill <ben.m.cahill@intel.com>
Date: Fri, 5 Feb 2010 11:33:47 -0800
Subject: iwlwifi: Add chain_noise support for 6050

Existing iwl6050_ops->iwl6050_hcmd_utils structure had no pointers to chain
noise functions (gain_computation and chain_noise_reset).  As it turns out,
by adding chain_noise_scale (see related patch), there is no need for separate
chain noise function, so simply use iwl6000_ops->iwl5000_hcmd_utils, and
remove those for 6050.

Signed-off-by: Ben Cahill <ben.m.cahill@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-6000.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 17198253b0bc..782e23a26984 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -277,21 +277,6 @@ static const struct iwl_ops iwl6000_ops = {
 	.led = &iwlagn_led_ops,
 };
 
-static struct iwl_hcmd_utils_ops iwl6050_hcmd_utils = {
-	.get_hcmd_size = iwl5000_get_hcmd_size,
-	.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
-	.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
-	.calc_rssi = iwl5000_calc_rssi,
-};
-
-static const struct iwl_ops iwl6050_ops = {
-	.ucode = &iwl5000_ucode,
-	.lib = &iwl6000_lib,
-	.hcmd = &iwl5000_hcmd,
-	.utils = &iwl6050_hcmd_utils,
-	.led = &iwlagn_led_ops,
-};
-
 /*
  * "i": Internal configuration, use internal Power Amplifier
  */
@@ -395,7 +380,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6050_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
@@ -427,7 +412,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G,
-	.ops = &iwl6050_ops,
+	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-- 
cgit v1.2.3


From 21b2d8bd2f0d4e0f21ade147fd193c8b9c1fd2b9 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Fri, 5 Feb 2010 11:33:48 -0800
Subject: iwlwifi: Send broadcast probe request only when asked to

When running directed active scans we currently end up sending both the SSID
probe requests and an additional broadcast one.
This is due to the fact that we always leave the probe request template SSID IE
length to 0. Instead we should set it to the first SSID to scan, and fill the
direct_scan array with the remaining SSIDs to scan for. This way we only send
what we've been asked to: a broadcast probe request when no directed scan is
requested, and directed probe requests otherwise.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c  |  2 +-
 drivers/net/wireless/iwlwifi/iwl-scan.c | 49 ++++++++++++++++++++++-----------
 2 files changed, 34 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index b528a20ade4f..f51b8cd80de5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2631,7 +2631,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
 	 */
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 08faafae8497..f786a407638f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -651,9 +651,20 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 	if (left < 0)
 		return 0;
 	*pos++ = WLAN_EID_SSID;
-	*pos++ = 0;
-
-	len += 2;
+	if (!priv->is_internal_short_scan &&
+	    priv->scan_request->n_ssids) {
+		struct cfg80211_ssid *ssid =
+			priv->scan_request->ssids;
+
+		/* Broadcast if ssid_len is 0 */
+		*pos++ = ssid->ssid_len;
+		memcpy(pos, ssid->ssid, ssid->ssid_len);
+		pos += ssid->ssid_len;
+		len += 2 + ssid->ssid_len;
+	} else {
+		*pos++ = 0;
+		len += 2;
+	}
 
 	if (WARN_ON(left < ie_len))
 		return len;
@@ -782,20 +793,26 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	if (priv->is_internal_short_scan) {
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
 	} else if (priv->scan_request->n_ssids) {
-		int i, p = 0;
 		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-		for (i = 0; i < priv->scan_request->n_ssids; i++) {
-			/* always does wildcard anyway */
-			if (!priv->scan_request->ssids[i].ssid_len)
-				continue;
-			scan->direct_scan[p].id = WLAN_EID_SSID;
-			scan->direct_scan[p].len =
-				priv->scan_request->ssids[i].ssid_len;
-			memcpy(scan->direct_scan[p].ssid,
-			       priv->scan_request->ssids[i].ssid,
-			       priv->scan_request->ssids[i].ssid_len);
-			n_probes++;
-			p++;
+		/*
+		 * The first SSID to scan is stuffed into the probe request
+		 * template and the remaining ones are handled through the
+		 * direct_scan array.
+		 */
+		if (priv->scan_request->n_ssids > 1) {
+			int i, p = 0;
+			for (i = 1; i < priv->scan_request->n_ssids; i++) {
+				if (!priv->scan_request->ssids[i].ssid_len)
+					continue;
+				scan->direct_scan[p].id = WLAN_EID_SSID;
+				scan->direct_scan[p].len =
+					priv->scan_request->ssids[i].ssid_len;
+				memcpy(scan->direct_scan[p].ssid,
+				       priv->scan_request->ssids[i].ssid,
+				       priv->scan_request->ssids[i].ssid_len);
+				n_probes++;
+				p++;
+			}
 		}
 		is_active = true;
 	} else
-- 
cgit v1.2.3


From 733da37dab72de6b3f8b0c56b5cdea322f18a684 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sat, 6 Feb 2010 22:38:23 +0800
Subject: ath9k: fix keycache leak in split tkip case

If split tkip key is used, ath_delete_key should delete
rx key and rx mic key. This patch fixes the leak of hw
keycache in the case.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 40da7a6e4b6b..9c8f925c2093 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -809,6 +809,7 @@ static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf
 
 	clear_bit(key->hw_key_idx + 64, common->keymap);
 	if (common->splitmic) {
+		ath9k_hw_keyreset(ah, key->hw_key_idx + 32);
 		clear_bit(key->hw_key_idx + 32, common->keymap);
 		clear_bit(key->hw_key_idx + 64 + 32, common->keymap);
 	}
-- 
cgit v1.2.3


From 4046fe66ce74b66b553035c57c892f4715e074db Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:20:44 +0200
Subject: adm821: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Compile-tested only.

Cc: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/adm8211.c | 13 -------------
 1 file changed, 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index e1f04bb437e3..6508515feed3 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -302,18 +302,6 @@ static int adm8211_get_stats(struct ieee80211_hw *dev,
 	return 0;
 }
 
-static int adm8211_get_tx_stats(struct ieee80211_hw *dev,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct adm8211_priv *priv = dev->priv;
-
-	stats[0].len = priv->cur_tx - priv->dirty_tx;
-	stats[0].limit = priv->tx_ring_size - 2;
-	stats[0].count = priv->dirty_tx;
-
-	return 0;
-}
-
 static void adm8211_interrupt_tci(struct ieee80211_hw *dev)
 {
 	struct adm8211_priv *priv = dev->priv;
@@ -1773,7 +1761,6 @@ static const struct ieee80211_ops adm8211_ops = {
 	.prepare_multicast	= adm8211_prepare_multicast,
 	.configure_filter	= adm8211_configure_filter,
 	.get_stats		= adm8211_get_stats,
-	.get_tx_stats		= adm8211_get_tx_stats,
 	.get_tsf		= adm8211_get_tsft
 };
 
-- 
cgit v1.2.3


From 8ccbc3b8b0c919e8609560ca56cd777ece8d2c41 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:20:52 +0200
Subject: mwl8k: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

mwl8k used struct ieee80211_tx_queue_stats internally to track the queue
lenght. Replace struct ieee80211_tx_queue_stats with a simple len field
in struct mwl8k_tx_queue. Limit and count fields seemed to be unused.

Compile-tested only.

Cc: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 35 +++++++----------------------------
 1 file changed, 7 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index f0f08f3919cc..0cfdb9db66f7 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -119,7 +119,7 @@ struct mwl8k_tx_queue {
 	/* sw appends here */
 	int tail;
 
-	struct ieee80211_tx_queue_stats stats;
+	unsigned int len;
 	struct mwl8k_tx_desc *txd;
 	dma_addr_t txd_dma;
 	struct sk_buff **skb;
@@ -1136,8 +1136,7 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index)
 	int size;
 	int i;
 
-	memset(&txq->stats, 0, sizeof(struct ieee80211_tx_queue_stats));
-	txq->stats.limit = MWL8K_TX_DESCS;
+	txq->len = 0;
 	txq->head = 0;
 	txq->tail = 0;
 
@@ -1213,7 +1212,7 @@ static void mwl8k_dump_tx_rings(struct ieee80211_hw *hw)
 		printk(KERN_ERR "%s: txq[%d] len=%d head=%d tail=%d "
 		       "fw_owned=%d drv_owned=%d unused=%d\n",
 		       wiphy_name(hw->wiphy), i,
-		       txq->stats.len, txq->head, txq->tail,
+		       txq->len, txq->head, txq->tail,
 		       fw_owned, drv_owned, unused);
 	}
 }
@@ -1299,7 +1298,7 @@ mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int limit, int force)
 	int processed;
 
 	processed = 0;
-	while (txq->stats.len > 0 && limit--) {
+	while (txq->len > 0 && limit--) {
 		int tx;
 		struct mwl8k_tx_desc *tx_desc;
 		unsigned long addr;
@@ -1321,8 +1320,8 @@ mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int limit, int force)
 		}
 
 		txq->head = (tx + 1) % MWL8K_TX_DESCS;
-		BUG_ON(txq->stats.len == 0);
-		txq->stats.len--;
+		BUG_ON(txq->len == 0);
+		txq->len--;
 		priv->pending_tx_pkts--;
 
 		addr = le32_to_cpu(tx_desc->pkt_phys_addr);
@@ -1454,8 +1453,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
 	wmb();
 	tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
 
-	txq->stats.count++;
-	txq->stats.len++;
+	txq->len++;
 	priv->pending_tx_pkts++;
 
 	txq->tail++;
@@ -3818,24 +3816,6 @@ static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	return rc;
 }
 
-static int mwl8k_get_tx_stats(struct ieee80211_hw *hw,
-			      struct ieee80211_tx_queue_stats *stats)
-{
-	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_tx_queue *txq;
-	int index;
-
-	spin_lock_bh(&priv->tx_lock);
-	for (index = 0; index < MWL8K_TX_QUEUES; index++) {
-		txq = priv->txq + index;
-		memcpy(&stats[index], &txq->stats,
-			sizeof(struct ieee80211_tx_queue_stats));
-	}
-	spin_unlock_bh(&priv->tx_lock);
-
-	return 0;
-}
-
 static int mwl8k_get_stats(struct ieee80211_hw *hw,
 			   struct ieee80211_low_level_stats *stats)
 {
@@ -3871,7 +3851,6 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.set_rts_threshold	= mwl8k_set_rts_threshold,
 	.sta_notify		= mwl8k_sta_notify,
 	.conf_tx		= mwl8k_conf_tx,
-	.get_tx_stats		= mwl8k_get_tx_stats,
 	.get_stats		= mwl8k_get_stats,
 	.ampdu_action		= mwl8k_ampdu_action,
 };
-- 
cgit v1.2.3


From d1ace8e57a4e3af78767684c6f6b5f8b88417abb Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:21:00 +0200
Subject: ar9170: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Because ar9170 uses ieee80211_tx_queue_stats internally, create a new
identical struct ar9170_tx_queue_stats which the driver can use.

Compile-tested only.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/ar9170.h |  8 +++++++-
 drivers/net/wireless/ath/ar9170/main.c   | 13 -------------
 2 files changed, 7 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index b99a8c2053d8..8c8ce67971e9 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -144,6 +144,12 @@ struct ar9170_sta_tid {
 	bool active;
 };
 
+struct ar9170_tx_queue_stats {
+	unsigned int len;
+	unsigned int limit;
+	unsigned int count;
+};
+
 #define AR9170_QUEUE_TIMEOUT		64
 #define AR9170_TX_TIMEOUT		8
 #define AR9170_BA_TIMEOUT		4
@@ -211,7 +217,7 @@ struct ar9170 {
 
 	/* qos queue settings */
 	spinlock_t tx_stats_lock;
-	struct ieee80211_tx_queue_stats tx_stats[5];
+	struct ar9170_tx_queue_stats tx_stats[5];
 	struct ieee80211_tx_queue_params edcf[5];
 
 	spinlock_t cmdlock;
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 4d27f7f67c76..91797cb6e0e8 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2396,18 +2396,6 @@ static int ar9170_get_stats(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static int ar9170_get_tx_stats(struct ieee80211_hw *hw,
-			       struct ieee80211_tx_queue_stats *tx_stats)
-{
-	struct ar9170 *ar = hw->priv;
-
-	spin_lock_bh(&ar->tx_stats_lock);
-	memcpy(tx_stats, ar->tx_stats, sizeof(tx_stats[0]) * hw->queues);
-	spin_unlock_bh(&ar->tx_stats_lock);
-
-	return 0;
-}
-
 static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
 			  const struct ieee80211_tx_queue_params *param)
 {
@@ -2509,7 +2497,6 @@ static const struct ieee80211_ops ar9170_ops = {
 	.set_key		= ar9170_set_key,
 	.sta_notify		= ar9170_sta_notify,
 	.get_stats		= ar9170_get_stats,
-	.get_tx_stats		= ar9170_get_tx_stats,
 	.ampdu_action		= ar9170_ampdu_action,
 };
 
-- 
cgit v1.2.3


From 3b2119096d7ec4ef50427e07b562897f2c139c11 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:21:07 +0200
Subject: ath5k: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Compile-tested only.

Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/base.c | 18 ------------------
 drivers/net/wireless/ath/ath5k/base.h |  1 -
 2 files changed, 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 535a6afb94e3..97d642575550 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -241,8 +241,6 @@ static int ath5k_set_key(struct ieee80211_hw *hw,
 		struct ieee80211_key_conf *key);
 static int ath5k_get_stats(struct ieee80211_hw *hw,
 		struct ieee80211_low_level_stats *stats);
-static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
-		struct ieee80211_tx_queue_stats *stats);
 static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
 static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
@@ -269,7 +267,6 @@ static const struct ieee80211_ops ath5k_hw_ops = {
 	.set_key 	= ath5k_set_key,
 	.get_stats 	= ath5k_get_stats,
 	.conf_tx 	= NULL,
-	.get_tx_stats 	= ath5k_get_tx_stats,
 	.get_tsf 	= ath5k_get_tsf,
 	.set_tsf 	= ath5k_set_tsf,
 	.reset_tsf 	= ath5k_reset_tsf,
@@ -1332,7 +1329,6 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 
 	spin_lock_bh(&txq->lock);
 	list_add_tail(&bf->list, &txq->q);
-	sc->tx_stats[txq->qnum].len++;
 	if (txq->link == NULL) /* is this first packet? */
 		ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
 	else /* no, so only link it */
@@ -1581,7 +1577,6 @@ ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 		ath5k_txbuf_free(sc, bf);
 
 		spin_lock_bh(&sc->txbuflock);
-		sc->tx_stats[txq->qnum].len--;
 		list_move_tail(&bf->list, &sc->txbuf);
 		sc->txbuf_len++;
 		spin_unlock_bh(&sc->txbuflock);
@@ -2011,10 +2006,8 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 		}
 
 		ieee80211_tx_status(sc->hw, skb);
-		sc->tx_stats[txq->qnum].count++;
 
 		spin_lock(&sc->txbuflock);
-		sc->tx_stats[txq->qnum].len--;
 		list_move_tail(&bf->list, &sc->txbuf);
 		sc->txbuf_len++;
 		spin_unlock(&sc->txbuflock);
@@ -3116,17 +3109,6 @@ ath5k_get_stats(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static int
-ath5k_get_tx_stats(struct ieee80211_hw *hw,
-		struct ieee80211_tx_queue_stats *stats)
-{
-	struct ath5k_softc *sc = hw->priv;
-
-	memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
-
-	return 0;
-}
-
 static u64
 ath5k_get_tsf(struct ieee80211_hw *hw)
 {
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index b72338c9bde7..9c2fbf230ce7 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -117,7 +117,6 @@ struct ath5k_softc {
 	struct pci_dev		*pdev;		/* for dma mapping */
 	void __iomem		*iobase;	/* address of the device */
 	struct mutex		lock;		/* dev-level lock */
-	struct ieee80211_tx_queue_stats tx_stats[AR5K_NUM_TX_QUEUES];
 	struct ieee80211_low_level_stats ll_stats;
 	struct ieee80211_hw	*hw;		/* IEEE 802.11 common */
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
-- 
cgit v1.2.3


From 3b27521a5be8b700451d54d4fa670f754e7f9720 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 19:50:50 +0200
Subject: b43: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Compile-tested only.

Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/dma.c  | 17 -----------------
 drivers/net/wireless/b43/dma.h  |  5 -----
 drivers/net/wireless/b43/main.c | 22 ----------------------
 drivers/net/wireless/b43/pio.c  | 17 -----------------
 drivers/net/wireless/b43/pio.h  |  5 -----
 5 files changed, 66 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 615af22c49fd..be7abf8916ad 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1369,7 +1369,6 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		b43err(dev->wl, "DMA tx mapping failure\n");
 		goto out;
 	}
-	ring->nr_tx_packets++;
 	if ((free_slots(ring) < TX_SLOTS_PER_FRAME) ||
 	    should_inject_overflow(ring)) {
 		/* This TX ring is full. */
@@ -1500,22 +1499,6 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	}
 }
 
-void b43_dma_get_tx_stats(struct b43_wldev *dev,
-			  struct ieee80211_tx_queue_stats *stats)
-{
-	const int nr_queues = dev->wl->hw->queues;
-	struct b43_dmaring *ring;
-	int i;
-
-	for (i = 0; i < nr_queues; i++) {
-		ring = select_ring_by_priority(dev, i);
-
-		stats[i].len = ring->used_slots / TX_SLOTS_PER_FRAME;
-		stats[i].limit = ring->nr_slots / TX_SLOTS_PER_FRAME;
-		stats[i].count = ring->nr_tx_packets;
-	}
-}
-
 static void dma_rx(struct b43_dmaring *ring, int *slot)
 {
 	const struct b43_dma_ops *ops = ring->ops;
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index f7ab37c4cdbc..dc91944d6022 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -228,8 +228,6 @@ struct b43_dmaring {
 	int used_slots;
 	/* Currently used slot in the ring. */
 	int current_slot;
-	/* Total number of packets sent. Statistics only. */
-	unsigned int nr_tx_packets;
 	/* Frameoffset in octets. */
 	u32 frameoffset;
 	/* Descriptor buffer size. */
@@ -278,9 +276,6 @@ void b43_dma_free(struct b43_wldev *dev);
 void b43_dma_tx_suspend(struct b43_wldev *dev);
 void b43_dma_tx_resume(struct b43_wldev *dev);
 
-void b43_dma_get_tx_stats(struct b43_wldev *dev,
-			  struct ieee80211_tx_queue_stats *stats);
-
 int b43_dma_tx(struct b43_wldev *dev,
 	       struct sk_buff *skb);
 void b43_dma_handle_txstatus(struct b43_wldev *dev,
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 3c5143b935f2..8f7a8c0ec27d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3356,27 +3356,6 @@ out_unlock:
 	return err;
 }
 
-static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
-			       struct ieee80211_tx_queue_stats *stats)
-{
-	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev;
-	int err = -ENODEV;
-
-	mutex_lock(&wl->mutex);
-	dev = wl->current_dev;
-	if (dev && b43_status(dev) >= B43_STAT_STARTED) {
-		if (b43_using_pio_transfers(dev))
-			b43_pio_get_tx_stats(dev, stats);
-		else
-			b43_dma_get_tx_stats(dev, stats);
-		err = 0;
-	}
-	mutex_unlock(&wl->mutex);
-
-	return err;
-}
-
 static int b43_op_get_stats(struct ieee80211_hw *hw,
 			    struct ieee80211_low_level_stats *stats)
 {
@@ -4602,7 +4581,6 @@ static const struct ieee80211_ops b43_hw_ops = {
 	.set_key		= b43_op_set_key,
 	.update_tkip_key	= b43_op_update_tkip_key,
 	.get_stats		= b43_op_get_stats,
-	.get_tx_stats		= b43_op_get_tx_stats,
 	.get_tsf		= b43_op_get_tsf,
 	.set_tsf		= b43_op_set_tsf,
 	.start			= b43_op_start,
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index c01b8e02412f..a6062c3e89a5 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -559,7 +559,6 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 		b43err(dev->wl, "PIO transmission failure\n");
 		goto out;
 	}
-	q->nr_tx_packets++;
 
 	B43_WARN_ON(q->buffer_used > q->buffer_size);
 	if (((q->buffer_size - q->buffer_used) < roundup(2 + 2 + 6, 4)) ||
@@ -605,22 +604,6 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 	}
 }
 
-void b43_pio_get_tx_stats(struct b43_wldev *dev,
-			  struct ieee80211_tx_queue_stats *stats)
-{
-	const int nr_queues = dev->wl->hw->queues;
-	struct b43_pio_txqueue *q;
-	int i;
-
-	for (i = 0; i < nr_queues; i++) {
-		q = select_queue_by_priority(dev, i);
-
-		stats[i].len = B43_PIO_MAX_NR_TXPACKETS - q->free_packet_slots;
-		stats[i].limit = B43_PIO_MAX_NR_TXPACKETS;
-		stats[i].count = q->nr_tx_packets;
-	}
-}
-
 /* Returns whether we should fetch another frame. */
 static bool pio_rx_frame(struct b43_pio_rxqueue *q)
 {
diff --git a/drivers/net/wireless/b43/pio.h b/drivers/net/wireless/b43/pio.h
index 7b3c42f93a16..1e516147424f 100644
--- a/drivers/net/wireless/b43/pio.h
+++ b/drivers/net/wireless/b43/pio.h
@@ -90,9 +90,6 @@ struct b43_pio_txqueue {
 	struct b43_pio_txpacket packets[B43_PIO_MAX_NR_TXPACKETS];
 	struct list_head packets_list;
 
-	/* Total number of transmitted packets. */
-	unsigned int nr_tx_packets;
-
 	/* Shortcut to the 802.11 core revision. This is to
 	 * avoid horrible pointer dereferencing in the fastpaths. */
 	u8 rev;
@@ -160,8 +157,6 @@ void b43_pio_free(struct b43_wldev *dev);
 int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb);
 void b43_pio_handle_txstatus(struct b43_wldev *dev,
 			     const struct b43_txstatus *status);
-void b43_pio_get_tx_stats(struct b43_wldev *dev,
-			  struct ieee80211_tx_queue_stats *stats);
 void b43_pio_rx(struct b43_pio_rxqueue *q);
 
 void b43_pio_tx_suspend(struct b43_wldev *dev);
-- 
cgit v1.2.3


From 8b2bbe66abfdc60f73b094a56ab29bfbf939201c Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 19:51:00 +0200
Subject: b43legacy: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Compile-tested only.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/dma.c  | 20 --------------------
 drivers/net/wireless/b43legacy/dma.h  | 10 ----------
 drivers/net/wireless/b43legacy/main.c | 24 ------------------------
 drivers/net/wireless/b43legacy/pio.c  | 13 -------------
 drivers/net/wireless/b43legacy/pio.h  | 11 -----------
 5 files changed, 78 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 0a86bdf53154..8b9387c6ff36 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -1411,7 +1411,6 @@ int b43legacy_dma_tx(struct b43legacy_wldev *dev,
 		b43legacyerr(dev->wl, "DMA tx mapping failure\n");
 		goto out_unlock;
 	}
-	ring->nr_tx_packets++;
 	if ((free_slots(ring) < SLOTS_PER_PACKET) ||
 	    should_inject_overflow(ring)) {
 		/* This TX ring is full. */
@@ -1527,25 +1526,6 @@ void b43legacy_dma_handle_txstatus(struct b43legacy_wldev *dev,
 	spin_unlock(&ring->lock);
 }
 
-void b43legacy_dma_get_tx_stats(struct b43legacy_wldev *dev,
-			      struct ieee80211_tx_queue_stats *stats)
-{
-	const int nr_queues = dev->wl->hw->queues;
-	struct b43legacy_dmaring *ring;
-	unsigned long flags;
-	int i;
-
-	for (i = 0; i < nr_queues; i++) {
-		ring = priority_to_txring(dev, i);
-
-		spin_lock_irqsave(&ring->lock, flags);
-		stats[i].len = ring->used_slots / SLOTS_PER_PACKET;
-		stats[i].limit = ring->nr_slots / SLOTS_PER_PACKET;
-		stats[i].count = ring->nr_tx_packets;
-		spin_unlock_irqrestore(&ring->lock, flags);
-	}
-}
-
 static void dma_rx(struct b43legacy_dmaring *ring,
 		   int *slot)
 {
diff --git a/drivers/net/wireless/b43legacy/dma.h b/drivers/net/wireless/b43legacy/dma.h
index 2f186003c31e..f9681041c2d8 100644
--- a/drivers/net/wireless/b43legacy/dma.h
+++ b/drivers/net/wireless/b43legacy/dma.h
@@ -243,8 +243,6 @@ struct b43legacy_dmaring {
 	int used_slots;
 	/* Currently used slot in the ring. */
 	int current_slot;
-	/* Total number of packets sent. Statistics only. */
-	unsigned int nr_tx_packets;
 	/* Frameoffset in octets. */
 	u32 frameoffset;
 	/* Descriptor buffer size. */
@@ -292,9 +290,6 @@ void b43legacy_dma_free(struct b43legacy_wldev *dev);
 void b43legacy_dma_tx_suspend(struct b43legacy_wldev *dev);
 void b43legacy_dma_tx_resume(struct b43legacy_wldev *dev);
 
-void b43legacy_dma_get_tx_stats(struct b43legacy_wldev *dev,
-				struct ieee80211_tx_queue_stats *stats);
-
 int b43legacy_dma_tx(struct b43legacy_wldev *dev,
 		     struct sk_buff *skb);
 void b43legacy_dma_handle_txstatus(struct b43legacy_wldev *dev,
@@ -315,11 +310,6 @@ void b43legacy_dma_free(struct b43legacy_wldev *dev)
 {
 }
 static inline
-void b43legacy_dma_get_tx_stats(struct b43legacy_wldev *dev,
-				struct ieee80211_tx_queue_stats *stats)
-{
-}
-static inline
 int b43legacy_dma_tx(struct b43legacy_wldev *dev,
 		     struct sk_buff *skb)
 {
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index b4e89a35e3fb..08523a45e23b 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2446,29 +2446,6 @@ static int b43legacy_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	return 0;
 }
 
-static int b43legacy_op_get_tx_stats(struct ieee80211_hw *hw,
-				     struct ieee80211_tx_queue_stats *stats)
-{
-	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
-	struct b43legacy_wldev *dev = wl->current_dev;
-	unsigned long flags;
-	int err = -ENODEV;
-
-	if (!dev)
-		goto out;
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	if (likely(b43legacy_status(dev) >= B43legacy_STAT_STARTED)) {
-		if (b43legacy_using_pio(dev))
-			b43legacy_pio_get_tx_stats(dev, stats);
-		else
-			b43legacy_dma_get_tx_stats(dev, stats);
-		err = 0;
-	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-out:
-	return err;
-}
-
 static int b43legacy_op_get_stats(struct ieee80211_hw *hw,
 				  struct ieee80211_low_level_stats *stats)
 {
@@ -3513,7 +3490,6 @@ static const struct ieee80211_ops b43legacy_hw_ops = {
 	.bss_info_changed	= b43legacy_op_bss_info_changed,
 	.configure_filter	= b43legacy_op_configure_filter,
 	.get_stats		= b43legacy_op_get_stats,
-	.get_tx_stats		= b43legacy_op_get_tx_stats,
 	.start			= b43legacy_op_start,
 	.stop			= b43legacy_op_stop,
 	.set_tim		= b43legacy_op_beacon_set_tim,
diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c
index 51866c9a2769..017c0e9c37ef 100644
--- a/drivers/net/wireless/b43legacy/pio.c
+++ b/drivers/net/wireless/b43legacy/pio.c
@@ -477,7 +477,6 @@ int b43legacy_pio_tx(struct b43legacy_wldev *dev,
 
 	list_move_tail(&packet->list, &queue->txqueue);
 	queue->nr_txfree--;
-	queue->nr_tx_packets++;
 	B43legacy_WARN_ON(queue->nr_txfree >= B43legacy_PIO_MAXTXPACKETS);
 
 	tasklet_schedule(&queue->txtask);
@@ -546,18 +545,6 @@ void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev,
 		tasklet_schedule(&queue->txtask);
 }
 
-void b43legacy_pio_get_tx_stats(struct b43legacy_wldev *dev,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct b43legacy_pio *pio = &dev->pio;
-	struct b43legacy_pioqueue *queue;
-
-	queue = pio->queue1;
-	stats[0].len = B43legacy_PIO_MAXTXPACKETS - queue->nr_txfree;
-	stats[0].limit = B43legacy_PIO_MAXTXPACKETS;
-	stats[0].count = queue->nr_tx_packets;
-}
-
 static void pio_rx_error(struct b43legacy_pioqueue *queue,
 			 int clear_buffers,
 			 const char *error)
diff --git a/drivers/net/wireless/b43legacy/pio.h b/drivers/net/wireless/b43legacy/pio.h
index 464fec05a06d..8e6773ea6e75 100644
--- a/drivers/net/wireless/b43legacy/pio.h
+++ b/drivers/net/wireless/b43legacy/pio.h
@@ -74,10 +74,6 @@ struct b43legacy_pioqueue {
 	 * posted to the device. We are waiting for the txstatus.
 	 */
 	struct list_head txrunning;
-	/* Total number or packets sent.
-	 * (This counter can obviously wrap).
-	 */
-	unsigned int nr_tx_packets;
 	struct tasklet_struct txtask;
 	struct b43legacy_pio_txpacket
 			 tx_packets_cache[B43legacy_PIO_MAXTXPACKETS];
@@ -106,8 +102,6 @@ int b43legacy_pio_tx(struct b43legacy_wldev *dev,
 		   struct sk_buff *skb);
 void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev,
 				 const struct b43legacy_txstatus *status);
-void b43legacy_pio_get_tx_stats(struct b43legacy_wldev *dev,
-			      struct ieee80211_tx_queue_stats *stats);
 void b43legacy_pio_rx(struct b43legacy_pioqueue *queue);
 
 /* Suspend TX queue in hardware. */
@@ -140,11 +134,6 @@ void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev,
 {
 }
 static inline
-void b43legacy_pio_get_tx_stats(struct b43legacy_wldev *dev,
-			      struct ieee80211_tx_queue_stats *stats)
-{
-}
-static inline
 void b43legacy_pio_rx(struct b43legacy_pioqueue *queue)
 {
 }
-- 
cgit v1.2.3


From 1296d4744516aeae8809e2f47ceecd88df4b037f Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:21:37 +0200
Subject: iwlwifi: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Compile-tested only.

Cc: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      |  1 -
 drivers/net/wireless/iwlwifi/iwl-core.c     | 36 -----------------------------
 drivers/net/wireless/iwlwifi/iwl-core.h     |  2 --
 drivers/net/wireless/iwlwifi/iwl3945-base.c |  1 -
 4 files changed, 40 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index f51b8cd80de5..c1eff4c5b448 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3440,7 +3440,6 @@ static struct ieee80211_ops iwl_hw_ops = {
 	.set_key = iwl_mac_set_key,
 	.update_tkip_key = iwl_mac_update_tkip_key,
 	.get_stats = iwl_mac_get_stats,
-	.get_tx_stats = iwl_mac_get_tx_stats,
 	.conf_tx = iwl_mac_conf_tx,
 	.reset_tsf = iwl_mac_reset_tsf,
 	.bss_info_changed = iwl_bss_info_changed,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index b248fba4875e..d390eef2efe5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2851,42 +2851,6 @@ out:
 }
 EXPORT_SYMBOL(iwl_mac_config);
 
-int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
-			 struct ieee80211_tx_queue_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-	int i, avail;
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < AC_NUM; i++) {
-		txq = &priv->txq[i];
-		q = &txq->q;
-		avail = iwl_queue_space(q);
-
-		stats[i].len = q->n_window - avail;
-		stats[i].limit = q->n_window - q->high_mark;
-		stats[i].count = q->n_window;
-
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-	return 0;
-}
-EXPORT_SYMBOL(iwl_mac_get_tx_stats);
-
 void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 49795b90246d..8f0c564e68b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -342,8 +342,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif);
 int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
 void iwl_config_ap(struct iwl_priv *priv);
-int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
-			 struct ieee80211_tx_queue_stats *stats);
 void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
 int iwl_alloc_txq_mem(struct iwl_priv *priv);
 void iwl_free_txq_mem(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 119da54116de..eac2b9a95711 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3835,7 +3835,6 @@ static struct ieee80211_ops iwl3945_hw_ops = {
 	.config = iwl_mac_config,
 	.configure_filter = iwl_configure_filter,
 	.set_key = iwl3945_mac_set_key,
-	.get_tx_stats = iwl_mac_get_tx_stats,
 	.conf_tx = iwl_mac_conf_tx,
 	.reset_tsf = iwl_mac_reset_tsf,
 	.bss_info_changed = iwl_bss_info_changed,
-- 
cgit v1.2.3


From 97e93fcd866ee7cc02082fc62509378f50547936 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:21:46 +0200
Subject: p54: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

p54 uses struct ieee80211_tx_queue_stats also internally, so create a new
identical struct p54_tx_queue_stats which the driver can use.

Compile-tested only.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/main.c | 11 -----------
 drivers/net/wireless/p54/p54.h  |  8 +++++++-
 drivers/net/wireless/p54/txrx.c |  2 +-
 3 files changed, 8 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 26428e4c9c60..3fe6366e567c 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -358,16 +358,6 @@ static int p54_get_stats(struct ieee80211_hw *dev,
 	return 0;
 }
 
-static int p54_get_tx_stats(struct ieee80211_hw *dev,
-			    struct ieee80211_tx_queue_stats *stats)
-{
-	struct p54_common *priv = dev->priv;
-
-	memcpy(stats, &priv->tx_stats[P54_QUEUE_DATA],
-	       sizeof(stats[0]) * dev->queues);
-	return 0;
-}
-
 static void p54_bss_info_changed(struct ieee80211_hw *dev,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *info,
@@ -522,7 +512,6 @@ static const struct ieee80211_ops p54_ops = {
 	.configure_filter	= p54_configure_filter,
 	.conf_tx		= p54_conf_tx,
 	.get_stats		= p54_get_stats,
-	.get_tx_stats		= p54_get_tx_stats
 };
 
 struct ieee80211_hw *p54_init_common(size_t priv_data_len)
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index 1afc39410e85..43a3b2ead81a 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -157,6 +157,12 @@ struct p54_led_dev {
 
 #endif /* CONFIG_P54_LEDS */
 
+struct p54_tx_queue_stats {
+	unsigned int len;
+	unsigned int limit;
+	unsigned int count;
+};
+
 struct p54_common {
 	struct ieee80211_hw *hw;
 	struct ieee80211_vif *vif;
@@ -183,7 +189,7 @@ struct p54_common {
 	/* (e)DCF / QOS state */
 	bool use_short_slot;
 	spinlock_t tx_stats_lock;
-	struct ieee80211_tx_queue_stats tx_stats[8];
+	struct p54_tx_queue_stats tx_stats[8];
 	struct p54_edcf_queue_param qos_params[8];
 
 	/* Radio data */
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index b6dda2b27fb5..0e8f69461ffe 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -183,7 +183,7 @@ static int p54_tx_qos_accounting_alloc(struct p54_common *priv,
 				       struct sk_buff *skb,
 				       const u16 p54_queue)
 {
-	struct ieee80211_tx_queue_stats *queue;
+	struct p54_tx_queue_stats *queue;
 	unsigned long flags;
 
 	if (WARN_ON(p54_queue > P54_QUEUE_NUM))
-- 
cgit v1.2.3


From 00a08eb62f790383bcc8ea309d4afb9ef346ef0b Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Sun, 7 Feb 2010 10:21:53 +0200
Subject: rt2x00: remove get_tx_stats() mac80211 op

get_tx_stats() will be removed from mac80211.

Compile-tested only.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c |  1 -
 drivers/net/wireless/rt2x00/rt2500pci.c |  1 -
 drivers/net/wireless/rt2x00/rt2500usb.c |  1 -
 drivers/net/wireless/rt2x00/rt2800lib.c |  1 -
 drivers/net/wireless/rt2x00/rt2x00.h    |  2 --
 drivers/net/wireless/rt2x00/rt2x00mac.c | 16 ----------------
 drivers/net/wireless/rt2x00/rt61pci.c   |  1 -
 drivers/net/wireless/rt2x00/rt73usb.c   |  1 -
 8 files changed, 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d86d233c6810..184335950825 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1561,7 +1561,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2400pci_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2400pci_get_tsf,
 	.tx_last_beacon		= rt2400pci_tx_last_beacon,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 46cbc6ef66ab..7dfcffadda2a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1859,7 +1859,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2500pci_get_tsf,
 	.tx_last_beacon		= rt2500pci_tx_last_beacon,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9e6f865c57f2..81ca4ec068db 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1761,7 +1761,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 529a37364eb0..a45e027f2d1f 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2297,7 +2297,6 @@ const struct ieee80211_ops rt2800_mac80211_ops = {
 	.set_rts_threshold	= rt2800_set_rts_threshold,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2800_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt2800_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 096da85a66fa..43b70c6e4e9c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1044,8 +1044,6 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats);
-int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
-			   struct ieee80211_tx_queue_stats *stats);
 void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 				struct ieee80211_vif *vif,
 				struct ieee80211_bss_conf *bss_conf,
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 00f1f939f1bb..abbd857ec759 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -555,22 +555,6 @@ int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_get_stats);
 
-int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
-			   struct ieee80211_tx_queue_stats *stats)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	unsigned int i;
-
-	for (i = 0; i < rt2x00dev->ops->tx_queues; i++) {
-		stats[i].len = rt2x00dev->tx[i].length;
-		stats[i].limit = rt2x00dev->tx[i].limit;
-		stats[i].count = rt2x00dev->tx[i].count;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00mac_get_tx_stats);
-
 void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 				struct ieee80211_vif *vif,
 				struct ieee80211_bss_conf *bss_conf,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index c353b497a65d..881340026c2a 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2730,7 +2730,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt61pci_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt61pci_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index a02691294395..3781eb7b4aa0 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2245,7 +2245,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt73usb_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt73usb_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
-- 
cgit v1.2.3


From 641eabb0a3717020d1a93d3f91493ab0d826c910 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun, 7 Feb 2010 16:01:55 +0100
Subject: ath: fix WARN_ON with Polish (Poland) Contry code

This patch fixes a WARN_ON which is triggered
by Poland's country code.

ath: EEPROM regdomain: 0x8268
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: PL
ath: Regpair used: 0x37
  -----------[ cut here ]------------
WARNING: at drivers/net/wireless/ath/regd.c:155 ath_regd_init+0x30b
Pid: 12661, comm: firmware/carl91 2.6.33-rc5-wl #18
Call Trace:
 [<>] ? warn_slowpath_common+0x76/0x8c
 [<>] ? ar9170_reg_notifier+0x0/0x2d [carl9170usb]
 [<>] ? ath_regd_init+0x30b/0x377 [ath]
 [<>] ? ar9170_register+0x3b3/0x3ca [carl9170usb]
[...]
---[ end trace ]---

Note: Poland is just an example. But it is very likely
that more country codes are affected.

Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/regd.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 039ac490465c..04abd1f556b7 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -110,8 +110,9 @@ static const struct ieee80211_regdomain ath_world_regdom_67_68_6A = {
 
 static inline bool is_wwr_sku(u16 regd)
 {
-	return ((regd & WORLD_SKU_MASK) == WORLD_SKU_PREFIX) ||
-		(regd == WORLD);
+	return ((regd & COUNTRY_ERD_FLAG) != COUNTRY_ERD_FLAG) &&
+		(((regd & WORLD_SKU_MASK) == WORLD_SKU_PREFIX) ||
+		(regd == WORLD));
 }
 
 static u16 ath_regd_get_eepromRD(struct ath_regulatory *reg)
-- 
cgit v1.2.3


From 2d171886b183982feb03446997c65e9e212b948e Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 8 Feb 2010 22:37:24 -0800
Subject: cxgb3: fix GRO checksum check

Verify the HW checksum state for frames handed to GRO processing.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/sge.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index bdbd14727e4b..318a018ca7c5 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2079,6 +2079,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 			 struct sge_fl *fl, int len, int complete)
 {
 	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+	struct port_info *pi = netdev_priv(qs->netdev);
 	struct sk_buff *skb = NULL;
 	struct cpl_rx_pkt *cpl;
 	struct skb_frag_struct *rx_frag;
@@ -2116,11 +2117,18 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 
 	if (!nr_frags) {
 		offset = 2 + sizeof(struct cpl_rx_pkt);
-		qs->lro_va = sd->pg_chunk.va + 2;
-	}
-	len -= offset;
+		cpl = qs->lro_va = sd->pg_chunk.va + 2;
 
-	prefetch(qs->lro_va);
+		if ((pi->rx_offload & T3_RX_CSUM) &&
+		     cpl->csum_valid && cpl->csum == htons(0xffff)) {
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+			qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
+		} else
+			skb->ip_summed = CHECKSUM_NONE;
+	} else
+		cpl = qs->lro_va;
+
+	len -= offset;
 
 	rx_frag += nr_frags;
 	rx_frag->page = sd->pg_chunk.page;
@@ -2136,12 +2144,8 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 		return;
 
 	skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	cpl = qs->lro_va;
 
 	if (unlikely(cpl->vlan_valid)) {
-		struct net_device *dev = qs->netdev;
-		struct port_info *pi = netdev_priv(dev);
 		struct vlan_group *grp = pi->vlan_grp;
 
 		if (likely(grp != NULL)) {
-- 
cgit v1.2.3


From bcf4d812e66ee95f762b38063d654fd1ff7156b0 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 8 Feb 2010 22:44:18 -0800
Subject: drivers/net: Correct NULL test

Test the value that was just allocated rather than the previously tested one.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@

if (x == NULL || ...) {
    ... when forall
    return ...; }
... when != goto l;
    when != x = e
    when != &x
*x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ax88796.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 62d9c9cc5671..1dd4403247ca 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -921,7 +921,7 @@ static int ax_probe(struct platform_device *pdev)
  		size = (res->end - res->start) + 1;
 
 		ax->mem2 = request_mem_region(res->start, size, pdev->name);
-		if (ax->mem == NULL) {
+		if (ax->mem2 == NULL) {
 			dev_err(&pdev->dev, "cannot reserve registers\n");
 			ret = -ENXIO;
 			goto exit_mem1;
-- 
cgit v1.2.3


From 3ad2f3fbb961429d2aa627465ae4829758bc7e07 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 3 Feb 2010 08:01:28 +0800
Subject: tree-wide: Assorted spelling fixes

In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 Documentation/DocBook/mtdnand.tmpl                  |  6 +++---
 Documentation/DocBook/v4l/common.xml                |  2 +-
 Documentation/DocBook/v4l/vidioc-g-parm.xml         |  2 +-
 Documentation/arm/Samsung-S3C24XX/CPUfreq.txt       |  4 ++--
 Documentation/hwmon/abituguru                       |  2 +-
 Documentation/input/rotary-encoder.txt              |  2 +-
 Documentation/networking/skfp.txt                   |  2 +-
 Documentation/s390/kvm.txt                          |  2 +-
 Documentation/scsi/ChangeLog.lpfc                   | 10 +++++-----
 Documentation/trace/ftrace.txt                      |  2 +-
 arch/arm/mach-ep93xx/micro9.c                       |  2 +-
 arch/arm/mach-nomadik/board-nhk8815.c               |  2 +-
 arch/arm/mach-u300/core.c                           |  4 ++--
 arch/arm/mach-u300/include/mach/debug-macro.S       |  2 +-
 arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h   |  2 +-
 arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h |  2 +-
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h  |  2 +-
 arch/cris/arch-v10/lib/old_checksum.c               |  2 +-
 arch/cris/arch-v32/mm/tlb.c                         |  2 +-
 arch/h8300/include/asm/io.h                         |  2 +-
 arch/ia64/sn/kernel/setup.c                         |  2 +-
 arch/m68k/atari/atakeyb.c                           |  2 +-
 arch/m68k/include/asm/io_no.h                       |  2 +-
 arch/powerpc/boot/dts/kmeter1.dts                   |  2 +-
 arch/s390/include/asm/cio.h                         |  2 +-
 arch/s390/kernel/sclp.S                             |  2 +-
 arch/sparc/kernel/leon_kernel.c                     |  2 +-
 arch/sparc/kernel/perf_event.c                      |  2 +-
 arch/x86/crypto/twofish-i586-asm_32.S               | 10 +++++-----
 arch/x86/crypto/twofish-x86_64-asm_64.S             | 20 ++++++++++----------
 arch/x86/kernel/head_64.S                           |  2 +-
 arch/x86/kernel/pci-calgary_64.c                    |  2 +-
 arch/x86/kernel/tsc.c                               |  2 +-
 arch/xtensa/kernel/entry.S                          |  4 ++--
 block/bsg.c                                         |  2 +-
 drivers/acpi/dock.c                                 |  2 +-
 drivers/ata/libata-sff.c                            |  2 +-
 drivers/ata/pata_acpi.c                             |  2 +-
 drivers/ata/pata_hpt3x3.c                           |  2 +-
 drivers/ata/pata_pcmcia.c                           |  2 +-
 drivers/block/drbd/drbd_int.h                       |  4 ++--
 drivers/block/drbd/drbd_req.h                       |  2 +-
 drivers/char/agp/intel-agp.c                        |  2 +-
 drivers/char/applicom.c                             |  2 +-
 drivers/char/hvc_iseries.c                          |  2 +-
 drivers/char/hw_random/n2-drv.c                     |  2 +-
 drivers/char/ip2/i2hw.h                             |  2 +-
 drivers/char/pty.c                                  |  2 +-
 drivers/char/tty_io.c                               |  2 +-
 drivers/char/vt.c                                   |  2 +-
 drivers/dma/coh901318_lli.h                         |  2 +-
 drivers/gpu/drm/nouveau/nouveau_bios.c              |  2 +-
 drivers/gpu/drm/nouveau/nouveau_drv.h               |  2 +-
 drivers/gpu/drm/via/via_irq.c                       |  4 ++--
 drivers/i2c/busses/i2c-pxa.c                        |  2 +-
 drivers/infiniband/hw/ehca/ehca_qes.h               |  4 ++--
 drivers/infiniband/hw/ehca/ehca_reqs.c              |  2 +-
 drivers/input/misc/yealink.h                        |  2 +-
 drivers/isdn/i4l/isdn_common.c                      |  2 +-
 drivers/media/dvb/dvb-core/dvb_frontend.h           |  8 ++++----
 drivers/media/video/bt8xx/bttv-cards.c              |  4 ++--
 drivers/media/video/gspca/ov519.c                   |  2 +-
 drivers/media/video/pwc/philips.txt                 |  2 +-
 drivers/media/video/sn9c102/sn9c102_sensor.h        |  2 +-
 drivers/media/video/tea6420.c                       |  2 +-
 drivers/mfd/sm501.c                                 |  8 ++++----
 drivers/mmc/host/mxcmmc.c                           |  2 +-
 drivers/mtd/chips/jedec_probe.c                     |  2 +-
 drivers/mtd/nand/bcm_umi_nand.c                     |  4 ++--
 drivers/mtd/nand/mxc_nand.c                         |  2 +-
 drivers/net/atlx/atl2.h                             |  2 +-
 drivers/net/chelsio/sge.c                           |  2 +-
 drivers/net/e1000e/82571.c                          |  2 +-
 drivers/net/e1000e/lib.c                            |  2 +-
 drivers/net/igb/igb_main.c                          |  2 +-
 drivers/net/irda/sa1100_ir.c                        |  2 +-
 drivers/net/qlge/qlge_ethtool.c                     |  2 +-
 drivers/net/qlge/qlge_main.c                        |  2 +-
 drivers/net/sfc/regs.h                              |  2 +-
 drivers/net/smsc9420.c                              |  2 +-
 drivers/net/spider_net.c                            |  4 ++--
 drivers/net/sungem.c                                |  2 +-
 drivers/net/tehuti.c                                |  2 +-
 drivers/net/tokenring/tms380tr.c                    |  4 ++--
 drivers/net/tun.c                                   |  2 +-
 drivers/net/ucc_geth.c                              |  2 +-
 drivers/net/wimax/i2400m/fw.c                       |  2 +-
 drivers/net/wimax/i2400m/i2400m.h                   |  2 +-
 drivers/net/wimax/i2400m/sdio.c                     |  4 ++--
 drivers/net/wimax/i2400m/usb.c                      |  4 ++--
 drivers/net/wireless/ath/ar9170/main.c              |  2 +-
 drivers/net/wireless/iwmc3200wifi/lmac.h            |  2 +-
 drivers/net/wireless/rt2x00/rt2500usb.c             |  4 ++--
 drivers/net/wireless/rt2x00/rt2800usb.c             |  4 ++--
 drivers/net/wireless/rt2x00/rt2x00debug.c           |  2 +-
 drivers/net/wireless/rt2x00/rt2x00dev.c             |  2 +-
 drivers/net/wireless/rt2x00/rt2x00queue.c           |  2 +-
 drivers/net/wireless/rt2x00/rt61pci.c               |  2 +-
 drivers/net/wireless/rt2x00/rt73usb.c               |  6 +++---
 drivers/s390/char/raw3270.c                         |  2 +-
 drivers/s390/char/sclp.c                            |  2 +-
 drivers/scsi/a100u2w.c                              |  2 +-
 drivers/scsi/initio.c                               |  2 +-
 drivers/scsi/libfc/fc_fcp.c                         |  2 +-
 drivers/scsi/lpfc/lpfc_els.c                        |  4 ++--
 drivers/scsi/pcmcia/nsp_cs.h                        |  2 +-
 drivers/scsi/pm8001/pm8001_hwi.c                    |  2 +-
 drivers/scsi/pm8001/pm8001_sas.c                    |  2 +-
 drivers/scsi/pmcraid.h                              |  2 +-
 drivers/scsi/sd.c                                   |  2 +-
 drivers/spi/spi_s3c24xx.c                           |  2 +-
 drivers/usb/musb/musb_regs.h                        |  2 +-
 drivers/usb/serial/cypress_m8.c                     |  2 +-
 drivers/video/omap/lcdc.c                           |  2 +-
 drivers/video/s1d13xxxfb.c                          |  4 ++--
 drivers/video/sm501fb.c                             |  2 +-
 fs/affs/bitmap.c                                    |  2 +-
 fs/binfmt_elf_fdpic.c                               |  2 +-
 fs/cifs/cifs_dfs_ref.c                              |  2 +-
 fs/cifs/cifssmb.c                                   |  2 +-
 fs/ext4/move_extent.c                               |  2 +-
 fs/fuse/inode.c                                     |  2 +-
 fs/gfs2/ops_fstype.c                                |  2 +-
 fs/jbd/transaction.c                                |  2 +-
 fs/nfsd/nfs4xdr.c                                   |  2 +-
 fs/ocfs2/dlmglue.c                                  |  2 +-
 fs/ocfs2/extent_map.c                               |  2 +-
 fs/reiserfs/bitmap.c                                |  2 +-
 include/linux/hil.h                                 | 16 ++++++++--------
 include/linux/lru_cache.h                           |  2 +-
 include/linux/sched.h                               |  2 +-
 include/media/davinci/vpfe_capture.h                |  2 +-
 net/ipv4/tcp_timer.c                                |  2 +-
 net/mac80211/mesh_plink.c                           |  2 +-
 net/netfilter/nf_conntrack_sip.c                    |  4 ++--
 net/netfilter/xt_hashlimit.c                        |  2 +-
 net/sctp/sm_sideeffect.c                            |  2 +-
 scripts/gfp-translate                               |  2 +-
 sound/pci/rme9652/hdspm.c                           |  2 +-
 sound/soc/codecs/wm8990.c                           |  2 +-
 tools/perf/util/hist.c                              |  2 +-
 141 files changed, 192 insertions(+), 192 deletions(-)

(limited to 'drivers/net')

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 5e7d84b48505..133cd6c3f3c1 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -488,7 +488,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				The ECC bytes must be placed immidiately after the data
 				bytes in order to make the syndrome generator work. This
 				is contrary to the usual layout used by software ECC. The
-				seperation of data and out of band area is not longer
+				separation of data and out of band area is not longer
 				possible. The nand driver code handles this layout and
 				the remaining free bytes in the oob area are managed by 
 				the autoplacement code. Provide a matching oob-layout
@@ -560,7 +560,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				bad blocks. They have factory marked good blocks. The marker pattern
 				is erased when the block is erased to be reused. So in case of
 				powerloss before writing the pattern back to the chip this block 
-				would be lost and added to the bad blocks. Therefor we scan the 
+				would be lost and added to the bad blocks. Therefore we scan the 
 				chip(s) when we detect them the first time for good blocks and 
 				store this information in a bad block table before erasing any 
 				of the blocks.
@@ -1094,7 +1094,7 @@ in this page</entry>
 		manufacturers specifications. This applies similar to the spare area. 
 	</para>
 	<para>
-		Therefor NAND aware filesystems must either write in page size chunks
+		Therefore NAND aware filesystems must either write in page size chunks
 		or hold a writebuffer to collect smaller writes until they sum up to 
 		pagesize. Available NAND aware filesystems: JFFS2, YAFFS. 		
 	</para>
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index c65f0ac9b6ee..cea23e1c4fc6 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -1170,7 +1170,7 @@ frames per second. If less than this number of frames is to be
 captured or output, applications can request frame skipping or
 duplicating on the driver side. This is especially useful when using
 the &func-read; or &func-write;, which are not augmented by timestamps
-or sequence counters, and to avoid unneccessary data copying.</para>
+or sequence counters, and to avoid unnecessary data copying.</para>
 
     <para>Finally these ioctls can be used to determine the number of
 buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml
index 78332d365ce9..392aa9e5571e 100644
--- a/Documentation/DocBook/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml
@@ -55,7 +55,7 @@ captured or output, applications can request frame skipping or
 duplicating on the driver side. This is especially useful when using
 the <function>read()</function> or <function>write()</function>, which
 are not augmented by timestamps or sequence counters, and to avoid
-unneccessary data copying.</para>
+unnecessary data copying.</para>
 
     <para>Further these ioctls can be used to determine the number of
 buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
index 76b3a11e90be..fa968aa99d67 100644
--- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -14,8 +14,8 @@ Introduction
  how the clocks are arranged. The first implementation used as single
  PLL to feed the ARM, memory and peripherals via a series of dividers
  and muxes and this is the implementation that is documented here. A
- newer version where there is a seperate PLL and clock divider for the
- ARM core is available as a seperate driver.
+ newer version where there is a separate PLL and clock divider for the
+ ARM core is available as a separate driver.
 
 
 Layout
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 87ffa0f5ec70..5eb3b9d5f0d5 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -30,7 +30,7 @@ Supported chips:
 	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
 	   You may also need to specify the fan_sensors option for these boards
 	   fan_sensors=5
-	2) There is a seperate abituguru3 driver for these motherboards,
+	2) There is a separate abituguru3 driver for these motherboards,
 	   the abituguru (without the 3 !) driver will not work on these
 	   motherboards (and visa versa)!
 
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 3a6aec40c0b0..8b4129de1d2d 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -75,7 +75,7 @@ and the number of steps or will clamp at the maximum and zero depending on
 the configuration.
 
 Because GPIO to IRQ mapping is platform specific, this information must
-be given in seperately to the driver. See the example below.
+be given in separately to the driver. See the example below.
 
 ---------<snip>---------
 
diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt
index abfddf81e34a..203ec66c9fb4 100644
--- a/Documentation/networking/skfp.txt
+++ b/Documentation/networking/skfp.txt
@@ -68,7 +68,7 @@ Compaq adapters (not tested):
 =======================
 
 From v2.01 on, the driver is integrated in the linux kernel sources.
-Therefor, the installation is the same as for any other adapter
+Therefore, the installation is the same as for any other adapter
 supported by the kernel.
 Refer to the manual of your distribution about the installation
 of network adapters.
diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
index 6f5ceb0f09fc..85f3280d7ef6 100644
--- a/Documentation/s390/kvm.txt
+++ b/Documentation/s390/kvm.txt
@@ -102,7 +102,7 @@ args:		unsigned long
 see also:	include/linux/kvm.h
 This ioctl stores the state of the cpu at the guest real address given as
 argument, unless one of the following values defined in include/linux/kvm.h
-is given as arguement:
+is given as argument:
 KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
 absolute lowcore as defined by the principles of operation
 KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index ff19a52fe004..2ffc1148eb95 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -989,8 +989,8 @@ Changes from 20040709 to 20040716
 	* Remove redundant port_cmp != 2 check in if
 	  (!port_cmp) { .... if (port_cmp != 2).... }
 	* Clock changes: removed struct clk_data and timerList.
-	* Clock changes: seperate nodev_tmo and els_retry_delay into 2
-	  seperate timers and convert to 1 argument changed
+	* Clock changes: separate nodev_tmo and els_retry_delay into 2
+	  separate timers and convert to 1 argument changed
 	  LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert
 	  ipfarp_tmo to 1 argument convert target struct tmofunc and
 	  rtplunfunc to 1 argument * cr_count, cr_delay and
@@ -1514,7 +1514,7 @@ Changes from 20040402 to 20040409
 	* Remove unused elxclock declaration in elx_sli.h.
 	* Since everywhere IOCB_ENTRY is used, the return value is cast,
 	  move the cast into the macro.
-	* Split ioctls out into seperate files
+	* Split ioctls out into separate files
 
 Changes from 20040326 to 20040402
 
@@ -1534,7 +1534,7 @@ Changes from 20040326 to 20040402
 	* Unused variable cleanup
 	* Use Linux list macros for DMABUF_t
 	* Break up ioctls into 3 sections, dfc, util, hbaapi
-	  rearranged code so this could be easily seperated into a
+	  rearranged code so this could be easily separated into a
 	  differnet module later All 3 are currently turned on by
 	  defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL,
 	  LPFC_HBAAPI_IOCTL
@@ -1551,7 +1551,7 @@ Changes from 20040326 to 20040402
 	  started by lpfc_online().  lpfc_offline() only stopped
 	  els_timeout routine.  It now stops all timeout routines
 	  associated with that hba.
-	* Replace seperate next and prev pointers in struct
+	* Replace separate next and prev pointers in struct
 	  lpfc_bindlist with list_head type.  In elxHBA_t, replace
 	  fc_nlpbind_start and _end with fc_nlpbind_list and use
 	  list_head macros to access it.
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index bab3040da548..03485bfbd797 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1588,7 +1588,7 @@ module author does not need to worry about it.
 
 When tracing is enabled, kstop_machine is called to prevent
 races with the CPUS executing code being modified (which can
-cause the CPU to do undesireable things), and the nops are
+cause the CPU to do undesirable things), and the nops are
 patched back to calls. But this time, they do not call mcount
 (which is just a function stub). They now call into the ftrace
 infrastructure.
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1c5a10..c33360e82868 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
  *
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6613a3..ab3712c86d2b 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_addr",
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25be3dd8..d0cb5e940776 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -356,7 +356,7 @@ static struct resource ave_resources[] = {
 	/*
 	 * The AVE3e requires two regions of 256MB that it considers
 	 * "invisible". The hardware will not be able to access these
-	 * adresses, so they should never point to system RAM.
+	 * addresses, so they should never point to system RAM.
 	 */
 	{
 		.name  = "AVE3e Reserved 0",
@@ -571,7 +571,7 @@ static void __init u300_init_check_chip(void)
 /*
  * Some devices and their resources require reserved physical memory from
  * the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
  */
 static void __init u300_assign_physmem(void)
 {
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbbeeab3..d591fe13ed13 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 #include <mach/hardware.h>
 
 	.macro	addruart,rx
-	/* If we move the adress using MMU, use this. */
+	/* If we move the address using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?
 	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
index 652e2bbdaa20..dda19da037ad 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@ extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
  *	others = Special functions (dependant on bank)
  *
  * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
  * each case.
 */
 extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
index 36a85f5000c8..a111ad871833 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
  * needs to touch this if the clk_48m is used as the USB OHCI or other
  * peripheral source.
 */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d78bad..d623235ae961 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@ struct s3c_cpufreq_config {
  * @locktime_m: The lock-time in uS for the MPLL.
  * @locktime_u: The lock-time in uS for the UPLL.
  * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
  *	any frequency changes. This is really only need by devices like the
  *	S3C2410 where there is no or limited divider between the PLL and the
  *	ARMCLK.
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 1734b467efa6..8f79163f1394 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -77,7 +77,7 @@ __wsum csum_partial(const void *p, int len, __wsum __sum)
 		sum += *buff++;
 
 	if (endMarker > buff)
-		sum += *(const u8 *)buff;	/* add extra byte seperately */
+		sum += *(const u8 *)buff;	/* add extra byte separately */
 
 	BITOFF;
 	return (__force __wsum)sum;
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 6779bcb28ab0..c030d020660a 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -189,7 +189,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		spin_unlock(&mmu_context_lock);
 
 		/*
-		 * Remember the pgd for the fault handlers. Keep a seperate
+		 * Remember the pgd for the fault handlers. Keep a separate
 		 * copy of it because current and active_mm might be invalid
 		 * at points where * there's still a need to derefer the pgd.
 		 */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 33e842f3284b..c1a8df22080f 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -25,7 +25,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index ece1bf994499..c6c6d9381126 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -241,7 +241,7 @@ static void __cpuinit sn_check_for_wars(void)
  * Note:  This stuff is duped here because Altix requires the PCDP to
  * locate a usable VGA device due to lack of proper ACPI support.  Structures
  * could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesireable.
+ * this file to a more public location just for Altix use was undesirable.
  */
 
 struct hcdp_uart_desc {
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 4add96d13b19..5890897d28bf 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -121,7 +121,7 @@ KEYBOARD_STATE kb_state;
  * bytes have been lost and in which state of the packet structure we are now.
  * This usually causes keyboards bytes to be interpreted as mouse movements
  * and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
  * introduced the RESYNC state for IKBD data. In this state, the bytes up to
  * one that really looks like a key event (0x04..0xf2) or the start of a mouse
  * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 359065d5a9f2..6e2413e518cb 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -16,7 +16,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 65b8b4f27efe..d8b5d12fb663 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -490,7 +490,7 @@
 			compatible = "cfi-flash";
 			/*
 			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 seperate regions
+			 * one die, so we need to define 2 separate regions
 			 * that are scanned by physmap_of independantly.
 			 */
 			reg = <0 0x00000000 0x02000000
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e85679af54dd..e34347d567a6 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -20,7 +20,7 @@
 /**
  * struct ccw1 - channel command word
  * @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
+ * @flags: flags, like IDA addressing, etc.
  * @count: byte count
  * @cda: data address
  *
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index e27ca63076d1..27c1a2e236d1 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -221,7 +221,7 @@ _sclp_print:
 	lh	%r9,0(%r8)			# update sccb length
 	ar	%r9,%r6
 	sth	%r9,0(%r8)
-	ar	%r7,%r6				# update current mto adress
+	ar	%r7,%r6				# update current mto address
 	ltr	%r0,%r0				# more characters?
 	jnz	.LinitmtoS4
 	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 87f1760c0aa2..554e0b80bcde 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -124,7 +124,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 
 		if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
 		      (1<<LEON3_GPTIMER_SEPIRQ))) {
-			prom_printf("irq timer not configured with seperate irqs \n");
+			prom_printf("irq timer not configured with separate irqs \n");
 			BUG();
 		}
 
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index e856456ec02f..a565ee5146eb 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1353,7 +1353,7 @@ static void perf_callchain_user_32(struct pt_regs *regs,
 }
 
 /* Like powerpc we can't get PMU interrupts within the PMU handler,
- * so no need for seperate NMI and IRQ chains as on x86.
+ * so no need for separate NMI and IRQ chains as on x86.
  */
 static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
 
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed2c1b9..575331cb2a8a 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -22,7 +22,7 @@
 
 #include <asm/asm-offsets.h>
 
-/* return adress at 0 */
+/* return address at 0 */
 
 #define in_blk    12  /* input byte array address parameter*/
 #define out_blk   8  /* output byte array address parameter*/
@@ -230,8 +230,8 @@ twofish_enc_blk:
 	push    %edi
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
@@ -286,8 +286,8 @@ twofish_dec_blk:
 
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a586615..573aa102542e 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,11 +221,11 @@
 twofish_enc_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
@@ -274,11 +274,11 @@ twofish_enc_blk:
 twofish_dec_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2d8b5035371c..3d1e6f16b7a6 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -27,7 +27,7 @@
 #define GET_CR2_INTO_RCX movq %cr2, %rcx
 #endif
 
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
  * because we need identity-mapped pages.
  *
  */
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 2bbde6078143..fb99f7edb341 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1309,7 +1309,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
 /*
  * get_tce_space_from_tar():
  * Function for kdump case. Get the tce tables from first kernel
- * by reading the contents of the base adress register of calgary iommu
+ * by reading the contents of the base address register of calgary iommu
  */
 static void __init get_tce_space_from_tar(void)
 {
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 597683aa5ba0..dec8f68e3eda 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -50,7 +50,7 @@ u64 native_sched_clock(void)
 	 *   unstable. We do this because unlike Time Of Day,
 	 *   the scheduler clock tolerates small errors and it's
 	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
+	 *   can achieve it. )
 	 */
 	if (unlikely(tsc_disabled)) {
 		/* No locking but a rare wrong value is not a big deal: */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 80d24c485fd3..77fc9f6dc016 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -104,7 +104,7 @@
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _user_exception might be at an odd adress. Don't use call0..call12
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(user_exception)
@@ -244,7 +244,7 @@ _user_exception:
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(kernel_exception)
diff --git a/block/bsg.c b/block/bsg.c
index a9fd2d84b53a..46597a6bd112 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -260,7 +260,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm,
 		return ERR_PTR(ret);
 
 	/*
-	 * map scatter-gather elements seperately and string them to request
+	 * map scatter-gather elements separately and string them to request
 	 */
 	rq = blk_get_request(q, rw, GFP_KERNEL);
 	if (!rq)
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bbc2c1315c47..d7f363f9435f 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -605,7 +605,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops,
 	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		/*
 		 * An ATA bay can be in a dock and itself can be ejected
-		 * seperately, so there are two 'dock stations' which need the
+		 * separately, so there are two 'dock stations' which need the
 		 * ops
 		 */
 		dd = find_dock_dependent_device(dock_station, handle);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 741065c9da67..7f2c94a07c00 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2258,7 +2258,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset);
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index d8f35fe44421..9e33da9565d9 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings if
- *	neccessary.
+ *	necessary.
  */
 
 static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index c86c71639a95..727a81ce4c9f 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
  *	@id: Entry in match table
  *
  *	Perform basic initialisation. We set the device up so we access all
- *	ports via BAR4. This is neccessary to work around errata.
+ *	ports via BAR4. This is necessary to work around errata.
  */
 
 static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 1b392c9e8531..416aebb8b913 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 2bf3a6ef3684..d9301e861d9f 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -95,7 +95,7 @@ extern char usermode_helper[];
 
 /* All EEs on the free list should have ID_VACANT (== 0)
  * freshly allocated EEs get !ID_VACANT (== 1)
- * so if it says "cannot dereference null pointer at adress 0x00000001",
+ * so if it says "cannot dereference null pointer at address 0x00000001",
  * it is most likely one of these :( */
 
 #define ID_IN_SYNC      (4711ULL)
@@ -1171,7 +1171,7 @@ extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf
 /* Meta data layout
    We reserve a 128MB Block (4k aligned)
    * either at the end of the backing device
-   * or on a seperate meta data device. */
+   * or on a separate meta data device. */
 
 #define MD_RESERVED_SECT (128LU << 11)  /* 128 MB, unit sectors */
 /* The following numbers are sectors */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index f22c1bc8ec7e..16119d7056cc 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -57,7 +57,7 @@
  *
  *  It may me handed over to the local disk subsystem.
  *  It may be completed by the local disk subsystem,
- *    either sucessfully or with io-error.
+ *    either successfully or with io-error.
  *  In case it is a READ request, and it failed locally,
  *    it may be retried remotely.
  *
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 3999a5f25f38..45a22f9bfec2 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -269,7 +269,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem,
 			j++;
 		}
 	} else {
-		/* sg may merge pages, but we have to seperate
+		/* sg may merge pages, but we have to separate
 		 * per-page addr for GTT */
 		unsigned int len, m;
 
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index fe2cb2f5db17..a7424bf7eacf 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -14,7 +14,7 @@
 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
-/* adresses de base des cartes, IOCTL 6 plus complet                         */
+/* addresses de base des cartes, IOCTL 6 plus complet                         */
 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
 /* de code autre que le texte V2.6.1 en V2.8.0                               */
 /*****************************************************************************/
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index 936d05bf37fa..0794925d8042 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event)
 
 	if (!hvlpevent_is_int(event)) {
 		printk(KERN_WARNING
-			"hvc: got unexpected close acknowlegement\n");
+			"hvc: got unexpected close acknowledgement\n");
 		return;
 	}
 
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 9b3e09cd41f9..10f868eefaa6 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
  *        x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1
  *
  * The RNG_CTL_VCO value of each noise cell must be programmed
- * seperately.  This is why 4 control register values must be provided
+ * separately.  This is why 4 control register values must be provided
  * to the hypervisor.  During a write, the hypervisor writes them all,
  * one at a time, to the actual RNG_CTL register.  The first three
  * values are used to setup the desired RNG_CTL_VCO for each entropy
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 8aa6e7ab8d5b..c0ba6c05f0cd 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways:
 
 2) It may be hard-coded into your source by including a .h file (typically
 	supplied by Computone), which declares a data array and initializes every
-	element. This acheives the same result as if an entire loadware file had 
+	element. This achieves the same result as if an entire loadware file had 
 	been read into the array.
 
 	This requires more data space in your program, but access to the file system
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 385c44b3034f..5ee424817263 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty,
  *	@tty: tty being resized
  *	@ws: window size being set.
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index c6f3b48be9dd..56b11c1c7aeb 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2026,7 +2026,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
  *	@rows: rows (character)
  *	@cols: cols (character)
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 94f530a29691..bd1d1164fec5 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  *
  *	Resize a virtual console, clipping according to the actual constraints.
  *	If the caller passes a tty structure then update the termios winsize
- *	information and perform any neccessary signal handling.
+ *	information and perform any necessary signal handling.
  *
  *	Caller must hold the console semaphore. Takes the termios mutex and
  *	ctrl_lock of the tty IFF a tty is passed.
diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h
index 7bf713b79c6b..7a5c80990e9e 100644
--- a/drivers/dma/coh901318_lli.h
+++ b/drivers/dma/coh901318_lli.h
@@ -30,7 +30,7 @@ struct device;
  * @pool: pool handle
  * @dev: dma device
  * @lli_nbr: number of lli:s in the pool
- * @algin: adress alignemtn of lli:s
+ * @algin: address alignemtn of lli:s
  * returns 0 on success otherwise none zero
  */
 int coh901318_pool_create(struct coh901318_pool *pool,
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index d7f8d8b4a4b8..52fb371784e1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -3544,7 +3544,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b
 	 * at which modes should be set up in the dual link style.
 	 *
 	 * Following the header, the BMP (ver 0xa) table has several records,
-	 * indexed by a seperate xlat table, indexed in turn by the fp strap in
+	 * indexed by a separate xlat table, indexed in turn by the fp strap in
 	 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
 	 * numbers for use by INIT_SUB which controlled panel init and power,
 	 * and finally a dword of ms to sleep between power off and on
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 6b9690418bc7..23664058690f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -544,7 +544,7 @@ struct drm_nouveau_private {
 	uint32_t ramro_offset;
 	uint32_t ramro_size;
 
-	/* base physical adresses */
+	/* base physical addresses */
 	uint64_t fb_phys;
 	uint64_t fb_available_size;
 	uint64_t fb_mappable_pages;
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 5935b8842e86..34079f251cd4 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -150,7 +150,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
 		cur_irq++;
 	}
 
-	/* Acknowlege interrupts */
+	/* Acknowledge interrupts */
 	VIA_WRITE(VIA_REG_INTERRUPT, status);
 
 
@@ -165,7 +165,7 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv)
 	u32 status;
 
 	if (dev_priv) {
-		/* Acknowlege interrupts */
+		/* Acknowledge interrupts */
 		status = VIA_READ(VIA_REG_INTERRUPT);
 		VIA_WRITE(VIA_REG_INTERRUPT, status |
 			  dev_priv->irq_pending_mask);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 7647a20523a0..90ffbf6f9d4f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -12,7 +12,7 @@
  *
  *  History:
  *    Apr 2002: Initial version [CS]
- *    Jun 2002: Properly seperated algo/adap [FB]
+ *    Jun 2002: Properly separated algo/adap [FB]
  *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
  *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
  *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 5d28e3e98a20..90c4efa67586 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -46,7 +46,7 @@
 
 #include "ehca_tools.h"
 
-/* virtual scatter gather entry to specify remote adresses with length */
+/* virtual scatter gather entry to specify remote addresses with length */
 struct ehca_vsgentry {
 	u64 vaddr;
 	u32 lkey;
@@ -148,7 +148,7 @@ struct ehca_wqe {
 	u32 immediate_data;
 	union {
 		struct {
-			u64 remote_virtual_adress;
+			u64 remote_virtual_address;
 			u32 rkey;
 			u32 reserved;
 			u64 atomic_1st_op_dma_len;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index e3ec7fdd67bd..9a3fbfca9b41 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -269,7 +269,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 		/* no break is intentional here */
 	case IB_QPT_RC:
 		/* TODO: atomic not implemented */
-		wqe_p->u.nud.remote_virtual_adress =
+		wqe_p->u.nud.remote_virtual_address =
 			send_wr->wr.rdma.remote_addr;
 		wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey;
 
diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h
index 48af0be9cbdf..1e0f52397010 100644
--- a/drivers/input/misc/yealink.h
+++ b/drivers/input/misc/yealink.h
@@ -127,7 +127,7 @@ struct yld_ctl_packet {
  * yld_status struct.
  */
 
-/* LCD, each segment must be driven seperately.
+/* LCD, each segment must be driven separately.
  *
  * Layout:
  *
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index adb1e8c36b46..00c60e2e0ff7 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1347,7 +1347,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
 /*
  * isdn net devices manage lots of configuration variables as linked lists.
  * Those lists must only be manipulated from user space. Some of the ioctl's
- * service routines access user space and are not atomic. Therefor, ioctl's
+ * service routines access user space and are not atomic. Therefore, ioctl's
  * manipulating the lists and ioctl's sleeping while accessing the lists
  * are serialized by means of a semaphore.
  */
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 52e4ce4304ee..80dda308ff74 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -214,14 +214,14 @@ struct dvb_tuner_ops {
 	int (*get_status)(struct dvb_frontend *fe, u32 *status);
 	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
 
-	/** These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately. */
+	/** These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
 	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
 	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
 
 	/*
-	 * These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately.
+	 * These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
 	 */
 	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
 	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 12279f6d9bc4..716870ae85d5 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
  *
  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
- * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
+ * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
  * chips, ten eight input analog multiplexors, a not chip and a few
  * other components.
  *
@@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
  *
  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
  * determined what function (if any) it provides.  With the microcontroller
- * and sync seperator chips a guess is that it might have to do with video
+ * and sync separator chips a guess is that it might have to do with video
  * switching and maybe some digital I/O.
  */
 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index b4f965731244..e5e4c4440d39 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -503,7 +503,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
  * It does, however, give a short read at the end of a frame, if
- * neccessary, rather than run two frames together.
+ * necessary, rather than run two frames together.
  *
  * By choosing the right bulk transfer size, we are guaranteed to always
  * get a short read for the last read of each frame.  Frame sizes are
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index f9f3584281d8..d38dd791511e 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
 contains decompression routines that allow you to use higher image sizes and
 framerates; in addition the webcam uses less bandwidth on the USB bus (handy
 if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefor not be distributed as source; however, its use
+under a NDA, and may therefore not be distributed as source; however, its use
 is completely optional.
 
 You can build this code either into your kernel, or as a module. I recommend
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 4af7382da5c5..494957b10bac 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2],
 /*
    Write multiple registers with constant values. For example:
    sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
-   Register adresses must be < 256.
+   Register addresses must be < 256.
 */
 #define sn9c102_write_const_regs(sn9c102_device, data...)                     \
 	({ static const u8 _valreg[][2] = {data};                             \
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 0446524d3543..6bf6bc7dbc7f 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -6,7 +6,7 @@
 
     The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
     4 stereo outputs and gain control for each output.
-    It is cascadable, i.e. it can be found at the adresses 0x98
+    It is cascadable, i.e. it can be found at the addresses 0x98
     and 0x9a on the i2c-bus.
 
     For detailed informations download the specifications directly
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 0cc5eeff5ee8..10491e4e305d 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -523,7 +523,7 @@ unsigned long sm501_set_clock(struct device *dev,
 	unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 	unsigned char reg;
 	unsigned int pll_reg = 0;
-	unsigned long sm501_freq; /* the actual frequency acheived */
+	unsigned long sm501_freq; /* the actual frequency achieved */
 
 	struct sm501_clock to;
 
@@ -533,7 +533,7 @@ unsigned long sm501_set_clock(struct device *dev,
 
 	switch (clksrc) {
 	case SM501_CLOCK_P2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by
 		 * 2. This clock also has an additional pre divisor */
 
@@ -562,7 +562,7 @@ unsigned long sm501_set_clock(struct device *dev,
 		break;
 
 	case SM501_CLOCK_V2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by 2. */
 
 		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
@@ -648,7 +648,7 @@ unsigned long sm501_find_clock(struct device *dev,
 			       unsigned long req_freq)
 {
 	struct sm501_devdata *sm = dev_get_drvdata(dev);
-	unsigned long sm501_freq; /* the frequency achiveable by the 501 */
+	unsigned long sm501_freq; /* the frequency achieveable by the 501 */
 	struct sm501_clock to;
 
 	switch (clksrc) {
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 60a2b69e54f5..16cc91c827c9 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -4,7 +4,7 @@
  *  This is a driver for the SDHC controller found in Freescale MX2/MX3
  *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
  *  Unlike the hardware found on MX1, this hardware just works and does
- *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *  not need all the quirks found in imxmmc.c, hence the separate driver.
  *
  *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
  *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 1bec5e1ce6ac..8db1148dfa47 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -226,7 +226,7 @@ struct unlock_addr {
  * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
  * should not be used.  The  problem is that structures with
  * initializers have extra fields initialized to 0.  It is _very_
- * desireable to have the unlock address entries for unsupported
+ * desirable to have the unlock address entries for unsupported
  * data widths automatically initialized - that means that
  * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
  * must go unused.
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 087bcd745bb7..7d1cca7a31a9 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
 	if (!r)
 		return -ENXIO;
 
-	/* map physical adress */
+	/* map physical address */
 	bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
 
 	if (!bcm_umi_io_base) {
@@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(board_mtd);
 
-	/* unmap physical adress */
+	/* unmap physical address */
 	iounmap(bcm_umi_io_base);
 
 	/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 45dec5770da0..b2900d8406d3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		 * MXC NANDFC can only perform full page+spare or
 		 * spare-only read/write.  When the upper layers
 		 * layers perform a read/write buf operation,
-		 * we will used the saved column adress to index into
+		 * we will used the saved column address to index into
 		 * the full page.
 		 */
 		send_addr(host, 0, page_addr == -1);
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h
index d918bbe621ea..927e4de6474d 100644
--- a/drivers/net/atlx/atl2.h
+++ b/drivers/net/atlx/atl2.h
@@ -442,7 +442,7 @@ struct atl2_hw {
 struct atl2_ring_header {
     /* pointer to the descriptor ring memory */
     void *desc;
-    /* physical adress of the descriptor ring */
+    /* physical address of the descriptor ring */
     dma_addr_t dma;
     /* length of descriptor ring in bytes */
     unsigned int size;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 109d2783e4d8..bef02330464d 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
  *
  * Interrupts are handled by a single CPU and it is likely that on a MP system
  * the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
  * contention.
  */
 struct sge {
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 02d67d047d96..dc4eb87309c5 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1363,7 +1363,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
  *
  *  1) down
  *  2) autoneg_progress
- *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  3) autoneg_complete (the link successfully autonegotiated)
  *  4) forced_up (the link has been forced up, it did not autonegotiate)
  *
  **/
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 2fa9b36a2c5a..3af0b1b82832 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -587,7 +587,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
 					e_dbg("SERDES: Link up - autoneg "
-					   "completed sucessfully.\n");
+					   "completed successfully.\n");
 				} else {
 					mac->serdes_has_link = false;
 					e_dbg("SERDES: Link down - invalid"
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 997124d2992a..e2ce8f8a21a7 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -674,7 +674,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 	/* start with one vector for every rx queue */
 	numvecs = adapter->num_rx_queues;
 
-	/* if tx handler is seperate add 1 for every tx queue */
+	/* if tx handler is separate add 1 for every tx queue */
 	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
 		numvecs += adapter->num_tx_queues;
 
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index c412e8026173..1dcdce0631aa 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev)
 		 * If we missed a speed change, initialise at the new speed
 		 * directly.  It is debatable whether this is actually
 		 * required, but in the interests of continuing from where
-		 * we left off it is desireable.  The converse argument is
+		 * we left off it is desirable.  The converse argument is
 		 * that we should re-negotiate at 9600 baud again.
 		 */
 		if (si->newspeed) {
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 058fa0a48c6f..b8d21ab212c6 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -402,7 +402,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
 		u32 wol = 0;
 		status = ql_mb_wol_mode(qdev, wol);
 		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
-			(status == 0) ? "cleared sucessfully" : "clear failed",
+			(status == 0) ? "cleared successfully" : "clear failed",
 			wol, qdev->ndev->name);
 	}
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 894a7c84faef..a35845b48ea4 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3517,7 +3517,7 @@ int ql_wol(struct ql_adapter *qdev)
 		wol |= MB_WOL_MODE_ON;
 		status = ql_mb_wol_mode(qdev, wol);
 		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
-			(status == 0) ? "Sucessfully set" : "Failed", wol,
+			(status == 0) ? "Successfully set" : "Failed", wol,
 			qdev->ndev->name);
 	}
 
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
index 89d606fe9248..18a3be428348 100644
--- a/drivers/net/sfc/regs.h
+++ b/drivers/net/sfc/regs.h
@@ -95,7 +95,7 @@
 #define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
 #define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
 
-/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */
 #define	FR_BZ_INT_ISR0 0x00000090
 #define	FRF_BZ_INT_ISR_REG_LBN 0
 #define	FRF_BZ_INT_ISR_REG_WIDTH 64
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 12f0f5d74e3c..2ae1972bcb46 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1348,7 +1348,7 @@ static int smsc9420_open(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-	/* disable, mask and acknowlege all interrupts */
+	/* disable, mask and acknowledge all interrupts */
 	spin_lock_irqsave(&pd->int_lock, flags);
 	int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
 	smsc9420_reg_write(pd, INT_CFG, int_cfg);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 218524857bfc..839b1f065d3c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
  * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
  * @card: card structure
  *
- * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
+ * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
  * chip by writing to the appropriate register. DMA is enabled in
  * spider_net_enable_rxdmac.
  */
@@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card)
 
 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
 
-	/* set chain tail adress for RX chains and
+	/* set chain tail address for RX chains and
 	 * enable DMA */
 	spider_net_enable_rxchtails(card);
 	spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index b571a1babab9..a88fcb39ba15 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
 			break;
 
 		/* When writing back RX descriptor, GEM writes status
-		 * then buffer address, possibly in seperate transactions.
+		 * then buffer address, possibly in separate transactions.
 		 * If we don't wait for the chip to write both, we could
 		 * post a new buffer to this descriptor then have GEM spam
 		 * on the buffer address.  We sync on the RX completion
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 80b404f2b938..ed4e9c42935c 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1857,7 +1857,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
  * @data - desc's data
  * @size - desc's size
  *
- * NOTE: this func does check for available space and, if neccessary, waits for
+ * NOTE: this func does check for available space and, if necessary, waits for
  *   NIC to read existing data before writing new one.
  */
 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index e3c42f5ac4a9..4e4c402319c9 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
  * NOTE: This function should be used whenever the status of any TPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the TPL status may be executed at
- * an undesireable time. When this function is used, the status is always
+ * an undesirable time. When this function is used, the status is always
  * written when the function is called.
  */
 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
@@ -2266,7 +2266,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
  * This function should be used whenever the status of any RPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the RPL status may be executed
- * at an undesireable time. When this function is used, the status is
+ * at an undesirable time. When this function is used, the status is
  * always written when the function is called.
  */
 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 2834a01bae24..e572ecc09a44 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1365,7 +1365,7 @@ static int tun_chr_close(struct inode *inode, struct file *file)
 
 		__tun_detach(tun);
 
-		/* If desireable, unregister the netdevice. */
+		/* If desirable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST)) {
 			rtnl_lock();
 			if (dev->reg_state == NETREG_REGISTERED)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index eb8fe7e16c6c..8eec97799e05 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -429,7 +429,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth,
 	    ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num);
 
 	/* Ethernet frames are defined in Little Endian mode,
-	therefor to insert */
+	therefore to insert */
 	/* the address to the hash (Big Endian mode), we reverse the bytes.*/
 
 	set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr);
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 64cdfeb299ca..6c459f5cb5df 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m,
 		goto error_wait_for_ack;
 	}
 	rx_bytes = result;
-	/* verify the ack and read more if neccessary [result is the
+	/* verify the ack and read more if necessary [result is the
 	 * final amount of bytes we get in the ack]  */
 	result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags);
 	if (result < 0)
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 04df9bbe340f..820b128705ec 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed
  *     directly to wait for a reboot barker from the device.
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
- *     rom after reading the MAC adress. This is quite a dirty hack,
+ *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
  *     intialized after reading the MAC address.
  */
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 76a50ac02ebb..14f876b1358b 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -304,7 +304,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker that will trigger the driver
  * to reinitialize the state via __i2400m_dev_reset_handle.
@@ -314,7 +314,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 98f4f8c5fb68..99f04c475898 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -246,7 +246,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the USB bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker in the notification endpoint
  * that will trigger the driver to reinitialize the state
@@ -257,7 +257,7 @@ error_kzalloc:
  *
  * The device will be fully reset internally, disconnected from the
  * USB bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index f9d6db8d013e..46a1e19c6787 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2535,7 +2535,7 @@ void *ar9170_alloc(size_t priv_size)
 	/*
 	 * this buffer is used for rx stream reconstruction.
 	 * Under heavy load this device (or the transport layer?)
-	 * tends to split the streams into seperate rx descriptors.
+	 * tends to split the streams into separate rx descriptors.
 	 */
 
 	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index a3a79b5e2898..a855a99e49b8 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd {
 
 /* Power Management */
 #define POWER_TABLE_CMD			0x77
-#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define SAVE_RESTORE_ADDRESS_CMD		0x78
 #define REPLY_WATERMARK_CMD		0x79
 #define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
 #define PD_FLUSH_N_NOTIFICATION		0x7C
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 83f2592c59de..486c93559c29 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
 		/*
 		 * The encryption key doesn't fit within the CSR cache,
-		 * this means we should allocate it seperately and use
+		 * this means we should allocate it separately and use
 		 * rt2x00usb_vendor_request() to send the key to the hardware.
 		 */
 		reg = KEY_ENTRY(key->hw_key_idx);
@@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		/*
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it demands the data to be provided
-		 * both seperately as well as inside the frame.
+		 * both separately as well as inside the frame.
 		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 		 * to ensure rt2x00lib will not strip the data from the
 		 * frame after the copy, now we must tell mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index ab95346cf6a3..2e5c8a13758b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -100,7 +100,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 	 * There are 2 variations of the rt2870 firmware.
 	 * a) size: 4kb
 	 * b) size: 8kb
-	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * Note that (b) contains 2 separate firmware blobs of 4k
 	 * within the file. The first blob is the same firmware as (a),
 	 * but the second blob is for the additional chipsets.
 	 */
@@ -118,7 +118,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 
 	/*
 	 * 8kb firmware files must be checked as if it were
-	 * 2 seperate firmware files.
+	 * 2 separate firmware files.
 	 */
 	while (offset < len) {
 		if (!rt2800usb_check_crc(data + offset, 4096))
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 7d323a763b54..afee806affc2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -109,7 +109,7 @@ struct rt2x00debug_intf {
 
 	/*
 	 * HW crypto statistics.
-	 * All statistics are stored seperately per cipher type.
+	 * All statistics are stored separately per cipher type.
 	 */
 	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 265e66dba552..5e1d5167fff4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -397,7 +397,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
 	 * in that case it is possible that the data was
-	 * provided seperately (through hardware descriptor)
+	 * provided separately (through hardware descriptor)
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 9915a09141ef..38ffca9b0fe7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -502,7 +502,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
-	 * the frame so we can provide it to the driver seperately.
+	 * the frame so we can provide it to the driver separately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 0ca589306d71..99459db61efd 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ced3b6ab5e16..527368a45fd5 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -1665,7 +1665,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
+		 * decryption. It has provided the data separately but rt2x00lib
 		 * should decide if it should be reinserted.
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 62ddf5202b79..2a4c566456e7 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -373,7 +373,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
 					  (unsigned long) rq, 0, 0);
 		if (rq->rc == 0)
-			return;	/* Sucessfully restarted. */
+			return;	/* Successfully restarted. */
 		break;
 	case RAW3270_IO_STOP:
 		if (!rq)
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index ec88c59842e3..f6d72e1f2a38 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -196,7 +196,7 @@ __sclp_start_request(struct sclp_req *req)
 	req->start_count++;
 
 	if (rc == 0) {
-		/* Sucessfully started request */
+		/* Successfully started request */
 		req->status = SCLP_REQ_RUNNING;
 		sclp_running_state = sclp_running_state_running;
 		__sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ,
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 208d6df9ed59..ff5716d5f044 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host)
  *	init_orchid		-	initialise the host adapter
  *	@host:host adapter to initialise
  *
- *	Initialise the controller and if neccessary load the firmware.
+ *	Initialise the controller and if necessary load the firmware.
  *
  *	Returns -1 if the initialisation fails.
  */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 89a59484be02..a7714160fbc3 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base)
  *	initio_stop_bm		-	stop bus master
  *	@host: InitIO we are stopping
  *
- *	Stop any pending DMA operation, aborting the DMA if neccessary
+ *	Stop any pending DMA operation, aborting the DMA if necessary
  */
 
 static void initio_stop_bm(struct initio_host * host)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 96ee599d9a05..96446a85e008 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep;
 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
-#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowleged */
+#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 2cc39684ce97..c898f47f30ba 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -969,7 +969,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
  * function returns, it does not guarantee all the IOCBs are actually aborted.
  *
  * Return code
- *   0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ *   0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
  **/
 int
 lpfc_els_abort_flogi(struct lpfc_hba *phba)
@@ -3117,7 +3117,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 	    (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
 		/* A LS_RJT associated with Default RPI cleanup has its own
-		 * seperate code path.
+		 * separate code path.
 		 */
 		if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI))
 			ls_rjt = 1;
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 7db28cd49446..8c61a4fe1db9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -187,7 +187,7 @@
 #define S_IO		BIT(1)    /* Input/Output line from SCSI bus */
 #define S_CD		BIT(2)    /* Command/Data line from SCSI bus */
 #define S_BUSY		BIT(3)    /* Busy line from SCSI bus         */
-#define S_ACK		BIT(4)    /* Acknowlege line from SCSI bus   */
+#define S_ACK		BIT(4)    /* Acknowledge line from SCSI bus  */
 #define S_REQUEST	BIT(5)    /* Request line from SCSI bus      */
 #define S_SELECT	BIT(6)	  /*                                 */
 #define S_ATN		BIT(7)	  /*                                 */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f1b10e..7985ae45d688 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	default:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unkown device type(%x)\n", deviceType));
+			pm8001_printk("unknown device type(%x)\n", deviceType));
 		break;
 	}
 	phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a76390..3b2c98fba834 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
   * device ID(according to device's sas address) and returned it to LLDD. From
   * now on, we communicate with HBA FW with the device ID which HBA assigned
-  * rather than sas address. it is the neccessary step for our HBA but it is
+  * rather than sas address. it is the necessary step for our HBA but it is
   * the optional for other HBA driver.
   */
 static int pm8001_dev_found_notify(struct domain_device *dev)
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 92f89d50850c..b8ad07c3449e 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 
 /*
  * pmcraid_ioctl_header - definition of header structure that preceeds all the
- * buffers given as ioctl arguements.
+ * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
  * .reserved            : not used
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 255da53e5a01..5d94772d449d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2105,7 +2105,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
  *	which is followed by sdaaa.
  *
  *	This is basically 26 base counting with one extra 'nil' entry
- *	at the beggining from the second digit on and can be
+ *	at the beginning from the second digit on and can be
  *	determined using similar method as 26 base conversion with the
  *	index shifted -1 after each digit is computed.
  *
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index c010733877ae..1fabede9e061 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -275,7 +275,7 @@ static inline u32 ack_bit(unsigned int irq)
  * Claim the FIQ handler (only one can be active at any one time) and
  * then setup the correct transfer code for this transfer.
  *
- * This call updates all the necessary state information if sucessful,
+ * This call updates all the necessary state information if successful,
  * so the caller does not need to do anything more than start the transfer
  * as normal, since the IRQ will have been re-routed to the FIQ handler.
 */
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 473a94ef905f..7c14d5c5a8ac 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -436,7 +436,7 @@ static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
 
-/* Not implemented - HW has seperate Tx/Rx FIFO */
+/* Not implemented - HW has separate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000
 
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index a591ebec0f89..52a81a312b86 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -154,7 +154,7 @@ struct cypress_private {
 	int isthrottled;		   /* if throttled, discard reads */
 	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
-	/* we pass a pointer to this as the arguement sent to
+	/* we pass a pointer to this as the argument sent to
 	   cypress_set_termios old_termios */
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index a33483910dc8..9557f963662e 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -389,7 +389,7 @@ static int omap_lcdc_enable_plane(int plane, int enable)
 /*
  * Configure the LCD DMA for a palette load operation and do the palette
  * downloading synchronously. We don't use the frame+palette load mode of
- * the controller, since the palette can always be downloaded seperately.
+ * the controller, since the palette can always be downloaded separately.
  */
 static void load_palette(void)
 {
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0deb0a8867b7..7b63429f1a7c 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -517,12 +517,12 @@ s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 		src = (sy * stride) + (bpp * sx);
 	}
 
-	/* set source adress */
+	/* set source address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
 
-	/* set destination adress */
+	/* set destination address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 35370d0ecf03..b7dc1800efa9 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -411,7 +411,7 @@ static int sm501fb_set_par_common(struct fb_info *info,
 	struct sm501fb_par  *par = info->par;
 	struct sm501fb_info *fbi = par->info;
 	unsigned long pixclock;      /* pixelclock in Hz */
-	unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
+	unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */
 	unsigned int mem_type;
 	unsigned int clock_type;
 	unsigned int head_addr;
diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c
index dc5ef14bdc1c..8306d53307ed 100644
--- a/fs/affs/bitmap.c
+++ b/fs/affs/bitmap.c
@@ -128,7 +128,7 @@ err_range:
 /*
  * Allocate a block in the given allocation zone.
  * Since we have to byte-swap the bitmap on little-endian
- * machines, this is rather expensive. Therefor we will
+ * machines, this is rather expensive. Therefore we will
  * preallocate up to 16 blocks from the same word, if
  * possible. We are not doing preallocations in the
  * header zone, though.
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 18d77297ccc8..364fcfc0c5df 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1393,7 +1393,7 @@ static inline void fill_note(struct memelfnote *note, const char *name, int type
 
 /*
  * fill up all the fields in prstatus from the given task struct, except
- * registers which need to be filled up seperately.
+ * registers which need to be filled up separately.
  */
 static void fill_prstatus(struct elf_prstatus *prstatus,
 			  struct task_struct *p, long signr)
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index b44ce0a0711c..b1d61d0bdfc7 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -54,7 +54,7 @@ void cifs_dfs_release_automount_timer(void)
  * Extracts sharename form full UNC.
  * i.e. strips from UNC trailing path that is not part of share
  * name and fixup missing '\' in the begining of DFS node refferal
- * if neccessary.
+ * if necessary.
  * Returns pointer to share name on success or ERR_PTR on error.
  * Caller is responsible for freeing returned string.
  */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 941441d3e386..0e22440d2f0f 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3886,7 +3886,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		goto parse_DFS_referrals_exit;
 	}
 
-	/* collect neccessary data from referrals */
+	/* collect necessary data from referrals */
 	for (i = 0; i < *num_of_nodes; i++) {
 		char *temp;
 		int max_len;
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 82c415be87a4..12a9ec73a888 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -928,7 +928,7 @@ out2:
 }
 
 /**
- * mext_check_argumants - Check whether move extent can be done
+ * mext_check_arguments - Check whether move extent can be done
  *
  * @orig_inode:		original inode
  * @donor_inode:	donor inode
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 1a822ce2b24b..ec14d19ce501 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -850,7 +850,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req)
 	req->in.args[0].size = sizeof(*arg);
 	req->in.args[0].value = arg;
 	req->out.numargs = 1;
-	/* Variable length arguement used for backward compatibility
+	/* Variable length argument used for backward compatibility
 	   with interface version < 7.5.  Rest of init_out is zeroed
 	   by do_get_request(), so a short reply is not a problem */
 	req->out.argvar = 1;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index edfee24f3636..0556f7fededd 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -992,7 +992,7 @@ static const struct lm_lockops nolock_ops = {
 /**
  * gfs2_lm_mount - mount a locking protocol
  * @sdp: the filesystem
- * @args: mount arguements
+ * @args: mount arguments
  * @silent: if 1, don't complain if the FS isn't a GFS2 fs
  *
  * Returns: errno
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 006f9ad838a2..57ae203c8abf 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1398,7 +1398,7 @@ int journal_stop(handle_t *handle)
 	 * the case where our storage is so fast that it is more optimal to go
 	 * ahead and force a flush and wait for the transaction to be committed
 	 * than it is to wait for an arbitrary amount of time for new writers to
-	 * join the transaction.  We acheive this by measuring how long it takes
+	 * join the transaction.  We achieve this by measuring how long it takes
 	 * to commit a transaction, and compare it with how long this
 	 * transaction has been running, and if run time < commit time then we
 	 * sleep for the delta and commit.  This greatly helps super fast disks
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index a8587e90fd5a..143d43a93b72 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1528,7 +1528,7 @@ static void write_cinfo(__be32 **p, struct nfsd4_change_info *c)
 	} } while (0);
 
 /* Encode as an array of strings the string given with components
- * seperated @sep.
+ * separated @sep.
  */
 static __be32 nfsd4_encode_components(char sep, char *components,
 				   __be32 **pp, int *buflen)
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index c5e4a49e3a12..ccb9c44f478d 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1757,7 +1757,7 @@ out:
  * ocfs2_file_lock() and ocfs2_file_unlock() map to a single pair of
  * flock() calls. The locking approach this requires is sufficiently
  * different from all other cluster lock types that we implement a
- * seperate path to the "low-level" dlm calls. In particular:
+ * separate path to the "low-level" dlm calls. In particular:
  *
  * - No optimization of lock levels is done - we take at exactly
  *   what's been requested.
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index d35a27f4523e..83e9b1249aed 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -453,7 +453,7 @@ static int ocfs2_get_clusters_nocache(struct inode *inode,
 	if (i == -1) {
 		/*
 		 * Holes can be larger than the maximum size of an
-		 * extent, so we return their lengths in a seperate
+		 * extent, so we return their lengths in a separate
 		 * field.
 		 */
 		if (hole_len) {
diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
index 65c872761177..ecc04b5ede57 100644
--- a/fs/reiserfs/bitmap.c
+++ b/fs/reiserfs/bitmap.c
@@ -169,7 +169,7 @@ static int scan_bitmap_block(struct reiserfs_transaction_handle *th,
 			return 0;	// No free blocks in this bitmap
 		}
 
-		/* search for a first zero bit -- beggining of a window */
+		/* search for a first zero bit -- beginning of a window */
 		*beg = reiserfs_find_next_zero_le_bit
 		    ((unsigned long *)(bh->b_data), boundary, *beg);
 
diff --git a/include/linux/hil.h b/include/linux/hil.h
index 13352d7d0caf..523785a9de70 100644
--- a/include/linux/hil.h
+++ b/include/linux/hil.h
@@ -168,14 +168,14 @@ enum hil_command {
 	HIL_CMD_PR6	= 0x45,	/* Prompt6 */
 	HIL_CMD_PR7	= 0x46,	/* Prompt7 */
 	HIL_CMD_PRM	= 0x47,	/* Prompt (General Purpose) */
-	HIL_CMD_AK1	= 0x48,	/* Acknowlege1 */  
-	HIL_CMD_AK2	= 0x49,	/* Acknowlege2 */
-	HIL_CMD_AK3	= 0x4a,	/* Acknowlege3 */
-	HIL_CMD_AK4	= 0x4b,	/* Acknowlege4 */
-	HIL_CMD_AK5	= 0x4c,	/* Acknowlege5 */
-	HIL_CMD_AK6	= 0x4d,	/* Acknowlege6 */
-	HIL_CMD_AK7	= 0x4e,	/* Acknowlege7 */
-	HIL_CMD_ACK	= 0x4f,	/* Acknowlege (General Purpose) */
+	HIL_CMD_AK1	= 0x48,	/* Acknowledge1 */  
+	HIL_CMD_AK2	= 0x49,	/* Acknowledge2 */
+	HIL_CMD_AK3	= 0x4a,	/* Acknowledge3 */
+	HIL_CMD_AK4	= 0x4b,	/* Acknowledge4 */
+	HIL_CMD_AK5	= 0x4c,	/* Acknowledge5 */
+	HIL_CMD_AK6	= 0x4d,	/* Acknowledge6 */
+	HIL_CMD_AK7	= 0x4e,	/* Acknowledge7 */
+	HIL_CMD_ACK	= 0x4f,	/* Acknowledge (General Purpose) */
 
 	/* 0x50 to 0x78 reserved for future use  */
 	/* 0x80 to 0xEF device-specific commands */
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 3a2b2d9b0472..de48d167568b 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -64,7 +64,7 @@ For crash recovery after replication node failure,
   usually the condition is softened to regions that _may_ have been target of
   in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent
   bitmap, trading frequency of meta data transactions against amount of
-  (possibly unneccessary) resync traffic.
+  (possibly unnecessary) resync traffic.
 
   If we set a hard limit on the area that may be "hot" at any given time, we
   limit the amount of resync traffic needed for crash recovery.
diff --git a/include/linux/sched.h b/include/linux/sched.h
index abdfacc58653..a70957b138ed 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1533,7 +1533,7 @@ struct task_struct {
 
 	struct list_head	*scm_work_list;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/* Index of current stored adress in ret_stack */
+	/* Index of current stored address in ret_stack */
 	int curr_ret_stack;
 	/* Stack of return addresses for return function tracing */
 	struct ftrace_ret_stack	*ret_stack;
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
index d863e5e8426d..4314a5f6a087 100644
--- a/include/media/davinci/vpfe_capture.h
+++ b/include/media/davinci/vpfe_capture.h
@@ -165,7 +165,7 @@ struct vpfe_device {
 	u8 started;
 	/*
 	 * offset where second field starts from the starting of the
-	 * buffer for field seperated YCbCr formats
+	 * buffer for field separated YCbCr formats
 	 */
 	u32 field_off;
 };
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index 8816a20c2597..aff48d657181 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -133,7 +133,7 @@ static void tcp_mtu_probing(struct inet_connection_sock *icsk, struct sock *sk)
 }
 
 /* This function calculates a "timeout" which is equivalent to the timeout of a
- * TCP connection after "boundary" unsucessful, exponentially backed-off
+ * TCP connection after "boundary" unsuccessful, exponentially backed-off
  * retransmissions with an initial RTO of TCP_RTO_MIN.
  */
 static bool retransmits_timed_out(struct sock *sk,
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 0f7c6e6a4248..54e4c8bb23e7 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -743,7 +743,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		break;
 	default:
 		/* should not get here, PLINK_BLOCKED is dealt with at the
-		 * beggining of the function
+		 * beginning of the function
 		 */
 		spin_unlock_bh(&sta->lock);
 		break;
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 023966b569bf..fbe94adee7ac 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -276,7 +276,7 @@ EXPORT_SYMBOL_GPL(ct_sip_parse_request);
  * tabs, spaces and continuation lines, which are treated as a single whitespace
  * character.
  *
- * Some headers may appear multiple times. A comma seperated list of values is
+ * Some headers may appear multiple times. A comma separated list of values is
  * equivalent to multiple headers.
  */
 static const struct sip_header ct_sip_hdrs[] = {
@@ -412,7 +412,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr,
 }
 EXPORT_SYMBOL_GPL(ct_sip_get_header);
 
-/* Get next header field in a list of comma seperated values */
+/* Get next header field in a list of comma separated values */
 static int ct_sip_next_header(const struct nf_conn *ct, const char *dptr,
 			      unsigned int dataoff, unsigned int datalen,
 			      enum sip_header_types type,
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index dd16e404424f..cbaac92dad59 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -1,6 +1,6 @@
 /*
  *	xt_hashlimit - Netfilter module to limit the number of packets per time
- *	seperately for each hashbucket (sourceip/sourceport/dstip/dstport)
+ *	separately for each hashbucket (sourceip/sourceport/dstip/dstport)
  *
  *	(C) 2003-2004 by Harald Welte <laforge@netfilter.org>
  *	Copyright © CC Computer Consultants GmbH, 2007 - 2008
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 4e4ca65cd320..500886bda9b4 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -475,7 +475,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc,
 	 * used to provide an upper bound to this doubling operation.
 	 *
 	 * Special Case:  the first HB doesn't trigger exponential backoff.
-	 * The first unacknowleged HB triggers it.  We do this with a flag
+	 * The first unacknowledged HB triggers it.  We do this with a flag
 	 * that indicates that we have an outstanding HB.
 	 */
 	if (!is_hb || transport->hb_sent) {
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
index 073cb6d152a0..d81b968d864e 100644
--- a/scripts/gfp-translate
+++ b/scripts/gfp-translate
@@ -19,7 +19,7 @@ usage() {
 	exit 0
 }
 
-# Parse command-line arguements
+# Parse command-line arguments
 while [ $# -gt 0 ]; do
 	case $1 in
 		--source)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index a1b10d1a384d..db0ed1cbd982 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -2479,7 +2479,7 @@ static int snd_hdspm_put_qs_wire(struct snd_kcontrol *kcontrol,
    on MADICARD 
   - playback mixer matrix: [channelout+64] [output] [value]
   - input(thru) mixer matrix: [channelin] [output] [value]
-  (better do 2 kontrols for seperation ?)
+  (better do 2 kontrols for separation ?)
 */
 
 #define HDSPM_MIXER(xname, xindex) \
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 341481e0e830..427614a2762b 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -990,7 +990,7 @@ static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
 		reg = snd_soc_read(codec, WM8990_CLOCKING_2);
 		snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
 
-		/* set up N , fractional mode and pre-divisor if neccessary */
+		/* set up N , fractional mode and pre-divisor if necessary */
 		snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
 			(pll_div.div2?WM8990_PRESCALE:0));
 		snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index e8daf5ca6fd2..44408c2621cf 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -321,7 +321,7 @@ static size_t __callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
 			new_depth_mask &= ~(1 << (depth - 1));
 
 		/*
-		 * But we keep the older depth mask for the line seperator
+		 * But we keep the older depth mask for the line separator
 		 * to keep the level link until we reach the last child
 		 */
 		ret += ipchain__fprintf_graph_line(fp, depth, depth_mask,
-- 
cgit v1.2.3


From 71a157e8edca55198e808f8561dd49017a54ee34 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Mon, 1 Feb 2010 21:34:14 -0700
Subject: of: add 'of_' prefix to machine_is_compatible()

machine is compatible is an OF-specific call.  It should have
the of_ prefix to protect the global namespace.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
---
 arch/powerpc/kernel/pci_64.c                  |  2 +-
 arch/powerpc/platforms/85xx/xes_mpc85xx.c     |  4 +--
 arch/powerpc/platforms/cell/cbe_powerbutton.c |  2 +-
 arch/powerpc/platforms/cell/ras.c             |  2 +-
 arch/powerpc/platforms/pasemi/cpufreq.c       |  4 +--
 arch/powerpc/platforms/powermac/cpufreq_32.c  | 14 ++++-----
 arch/powerpc/platforms/powermac/cpufreq_64.c  | 14 ++++-----
 arch/powerpc/platforms/powermac/feature.c     |  2 +-
 arch/powerpc/platforms/powermac/smp.c         | 12 ++++----
 arch/powerpc/platforms/powermac/time.c        |  8 ++---
 arch/powerpc/platforms/powermac/udbg_scc.c    |  6 ++--
 arch/powerpc/sysdev/grackle.c                 |  4 +--
 drivers/char/hvc_beat.c                       |  2 +-
 drivers/gpu/drm/radeon/radeon_combios.c       | 44 +++++++++++++--------------
 drivers/macintosh/adb.c                       |  4 +--
 drivers/macintosh/therm_pm72.c                |  8 ++---
 drivers/macintosh/therm_windtunnel.c          |  2 +-
 drivers/macintosh/via-pmu-backlight.c         |  8 ++---
 drivers/macintosh/via-pmu.c                   |  8 ++---
 drivers/macintosh/windfarm_core.c             |  6 ++--
 drivers/macintosh/windfarm_cpufreq_clamp.c    |  6 ++--
 drivers/macintosh/windfarm_lm75_sensor.c      |  6 ++--
 drivers/macintosh/windfarm_max6690_sensor.c   |  6 ++--
 drivers/macintosh/windfarm_pm112.c            |  2 +-
 drivers/macintosh/windfarm_pm121.c            |  2 +-
 drivers/macintosh/windfarm_pm81.c             |  4 +--
 drivers/macintosh/windfarm_pm91.c             |  2 +-
 drivers/macintosh/windfarm_smu_sensors.c      |  6 ++--
 drivers/net/mace.c                            |  2 +-
 drivers/of/base.c                             |  6 ++--
 drivers/serial/pmac_zilog.c                   |  6 ++--
 drivers/video/aty/aty128fb.c                  | 14 ++++-----
 drivers/video/aty/atyfb_base.c                |  8 ++---
 drivers/video/aty/radeon_backlight.c          |  6 ++--
 include/linux/of_fdt.h                        |  2 +-
 sound/ppc/awacs.c                             | 24 +++++++--------
 sound/ppc/burgundy.c                          |  4 +--
 sound/ppc/pmac.c                              | 18 +++++------
 sound/soc/fsl/efika-audio-fabric.c            |  2 +-
 sound/soc/fsl/pcm030-audio-fabric.c           |  2 +-
 40 files changed, 142 insertions(+), 142 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ccf56ac92de5..d43fc65749c1 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -224,7 +224,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,
 	 * G5 machines... So when something asks for bus 0 io base
 	 * (bus 0 is HT root), we return the AGP one instead.
 	 */
-	if (in_bus == 0 && machine_is_compatible("MacRISC4")) {
+	if (in_bus == 0 && of_machine_is_compatible("MacRISC4")) {
 		struct device_node *agp;
 
 		agp = of_find_compatible_node(NULL, NULL, "u3-agp");
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 1b426050a2f9..0125604d096e 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -80,8 +80,8 @@ static void xes_mpc85xx_configure_l2(void __iomem *l2_base)
 	printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
 
 	ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
-	if (machine_is_compatible("MPC8540") ||
-	    machine_is_compatible("MPC8560"))
+	if (of_machine_is_compatible("MPC8540") ||
+	    of_machine_is_compatible("MPC8560"))
 		/*
 		 * Assume L2 SRAM is used fully for cache, so set
 		 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
index dcddaa5fcb66..f75a4daa4ca2 100644
--- a/arch/powerpc/platforms/cell/cbe_powerbutton.c
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -48,7 +48,7 @@ static int __init cbe_powerbutton_init(void)
 	int ret = 0;
 	struct input_dev *dev;
 
-	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+	if (!of_machine_is_compatible("IBM,CBPLUS-1.0")) {
 		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
 		ret = -ENODEV;
 		goto out;
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5e0a191764fc..608fd2b584c9 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -255,7 +255,7 @@ static int __init cbe_sysreset_init(void)
 {
 	struct cbe_pmd_regs __iomem *regs;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	sysreset_hack = of_machine_is_compatible("IBM,CBPLUS-1.0");
 	if (!sysreset_hack)
 		return 0;
 
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index be2527a516ea..d35e0520abf0 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -304,8 +304,8 @@ static struct cpufreq_driver pas_cpufreq_driver = {
 
 static int __init pas_cpufreq_init(void)
 {
-	if (!machine_is_compatible("PA6T-1682M") &&
-	    !machine_is_compatible("pasemi,pwrficient"))
+	if (!of_machine_is_compatible("PA6T-1682M") &&
+	    !of_machine_is_compatible("pasemi,pwrficient"))
 		return -ENODEV;
 
 	return cpufreq_register_driver(&pas_cpufreq_driver);
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 08d94e4cedd3..d4f127d18141 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -657,31 +657,31 @@ static int __init pmac_cpufreq_setup(void)
 	cur_freq = (*value) / 1000;
 
 	/*  Check for 7447A based MacRISC3 */
-	if (machine_is_compatible("MacRISC3") &&
+	if (of_machine_is_compatible("MacRISC3") &&
 	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
 	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 		pmac_cpufreq_init_7447A(cpunode);
 	/* Check for other MacRISC3 machines */
-	} else if (machine_is_compatible("PowerBook3,4") ||
-		   machine_is_compatible("PowerBook3,5") ||
-		   machine_is_compatible("MacRISC3")) {
+	} else if (of_machine_is_compatible("PowerBook3,4") ||
+		   of_machine_is_compatible("PowerBook3,5") ||
+		   of_machine_is_compatible("MacRISC3")) {
 		pmac_cpufreq_init_MacRISC3(cpunode);
 	/* Else check for iBook2 500/600 */
-	} else if (machine_is_compatible("PowerBook4,1")) {
+	} else if (of_machine_is_compatible("PowerBook4,1")) {
 		hi_freq = cur_freq;
 		low_freq = 400000;
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 550 */
-	else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+	else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
 		hi_freq = cur_freq;
 		low_freq = 500000;
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 400 & 500 */
-	else if (machine_is_compatible("PowerBook3,2")) {
+	else if (of_machine_is_compatible("PowerBook3,2")) {
 		/* We only know about the 400 MHz and the 500Mhz model
 		 * they both have 300 MHz as low frequency
 		 */
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 708c75133377..3ed288e68ec4 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -398,11 +398,11 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	int rc = -ENODEV;
 
 	/* Check supported platforms */
-	if (machine_is_compatible("PowerMac8,1") ||
-	    machine_is_compatible("PowerMac8,2") ||
-	    machine_is_compatible("PowerMac9,1"))
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2") ||
+	    of_machine_is_compatible("PowerMac9,1"))
 		use_volts_smu = 1;
-	else if (machine_is_compatible("PowerMac11,2"))
+	else if (of_machine_is_compatible("PowerMac11,2"))
 		use_volts_vdnap = 1;
 	else
 		return -ENODEV;
@@ -729,9 +729,9 @@ static int __init g5_cpufreq_init(void)
 		return -ENODEV;
 	}
 
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		rc = g5_pm72_cpufreq_init(cpus);
 #ifdef CONFIG_PMAC_SMU
 	else
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index fbc9bbd74dbd..33e815f4466c 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2426,7 +2426,7 @@ static int __init probe_motherboard(void)
 	    }
 	}
 	for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
-	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+	    if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
 	    }
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index b40c22d697f0..6898e8241cd0 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -693,9 +693,9 @@ static void __init smp_core99_setup(int ncpus)
 #ifdef CONFIG_PPC64
 
 	/* i2c based HW sync on some G5s */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		smp_core99_setup_i2c_hwsync(ncpus);
 
 	/* pfunc based HW sync on recent G5s */
@@ -713,7 +713,7 @@ static void __init smp_core99_setup(int ncpus)
 #else /* CONFIG_PPC64 */
 
 	/* GPIO based HW sync on ppc32 Core99 */
-	if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
+	if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
 		struct device_node *cpu;
 		const u32 *tbprop = NULL;
 
@@ -750,7 +750,7 @@ static void __init smp_core99_setup(int ncpus)
 #endif
 
 	/* 32 bits SMP can't NAP */
-	if (!machine_is_compatible("MacRISC4"))
+	if (!of_machine_is_compatible("MacRISC4"))
 		powersave_nap = 0;
 }
 
@@ -852,7 +852,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 		/* If we didn't start the second CPU, we must take
 		 * it off the bus
 		 */
-		if (machine_is_compatible("MacRISC4") &&
+		if (of_machine_is_compatible("MacRISC4") &&
 		    num_online_cpus() < 2)		
 			g5_phy_disable_cpu1();
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 1810e4226e56..48211ca134c3 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -317,9 +317,9 @@ void __init pmac_calibrate_decr(void)
 	 * calibration. That's better since the VIA itself seems
 	 * to be slightly off. --BenH
 	 */
-	if (!machine_is_compatible("MacRISC2") &&
-	    !machine_is_compatible("MacRISC3") &&
-	    !machine_is_compatible("MacRISC4"))
+	if (!of_machine_is_compatible("MacRISC2") &&
+	    !of_machine_is_compatible("MacRISC3") &&
+	    !of_machine_is_compatible("MacRISC4"))
 		if (via_calibrate_decr())
 			return;
 
@@ -328,7 +328,7 @@ void __init pmac_calibrate_decr(void)
 	 * probably implement calibration based on the KL timer on these
 	 * machines anyway... -BenH
 	 */
-	if (machine_is_compatible("PowerMac3,5"))
+	if (of_machine_is_compatible("PowerMac3,5"))
 		if (via_calibrate_decr())
 			return;
 #endif
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 9490157da62e..d83135a9830e 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -132,9 +132,9 @@ void udbg_scc_init(int force_scc)
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
-	} else if (machine_is_compatible("RackMac1,1")
-		   || machine_is_compatible("RackMac1,2")
-		   || machine_is_compatible("MacRISC4")) {
+	} else if (of_machine_is_compatible("RackMac1,1")
+		   || of_machine_is_compatible("RackMac1,2")
+		   || of_machine_is_compatible("MacRISC4")) {
 		/* Xserves and G5s default to 57600 */
 		scc_inittab[1] = 0;
 		scc_inittab[3] = 0;
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
index 5da37c2f22ee..cf27df6e508b 100644
--- a/arch/powerpc/sysdev/grackle.c
+++ b/arch/powerpc/sysdev/grackle.c
@@ -56,9 +56,9 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
 void __init setup_grackle(struct pci_controller *hose)
 {
 	setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
-	if (machine_is_compatible("PowerMac1,1"))
+	if (of_machine_is_compatible("PowerMac1,1"))
 		ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
-	if (machine_is_compatible("AAPL,PowerBook1998"))
+	if (of_machine_is_compatible("AAPL,PowerBook1998"))
 		grackle_set_loop_snoop(hose, 1);
 #if 0	/* Disabled for now, HW problems ??? */
 	grackle_set_stg(hose, 1);
diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c
index 0afc8b82212e..9b397c5ee1d7 100644
--- a/drivers/char/hvc_beat.c
+++ b/drivers/char/hvc_beat.c
@@ -99,7 +99,7 @@ static int hvc_beat_config(char *p)
 
 static int __init hvc_beat_console_init(void)
 {
-	if (hvc_beat_useit && machine_is_compatible("Beat")) {
+	if (hvc_beat_useit && of_machine_is_compatible("Beat")) {
 		hvc_instantiate(0, 0, &hvc_beat_get_put_ops);
 	}
 	return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 579c8920e081..13826a534065 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1280,47 +1280,47 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 	rdev->mode_info.connector_table = radeon_connector_table;
 	if (rdev->mode_info.connector_table == CT_NONE) {
 #ifdef CONFIG_PPC_PMAC
-		if (machine_is_compatible("PowerBook3,3")) {
+		if (of_machine_is_compatible("PowerBook3,3")) {
 			/* powerbook with VGA */
 			rdev->mode_info.connector_table = CT_POWERBOOK_VGA;
-		} else if (machine_is_compatible("PowerBook3,4") ||
-			   machine_is_compatible("PowerBook3,5")) {
+		} else if (of_machine_is_compatible("PowerBook3,4") ||
+			   of_machine_is_compatible("PowerBook3,5")) {
 			/* powerbook with internal tmds */
 			rdev->mode_info.connector_table = CT_POWERBOOK_INTERNAL;
-		} else if (machine_is_compatible("PowerBook5,1") ||
-			   machine_is_compatible("PowerBook5,2") ||
-			   machine_is_compatible("PowerBook5,3") ||
-			   machine_is_compatible("PowerBook5,4") ||
-			   machine_is_compatible("PowerBook5,5")) {
+		} else if (of_machine_is_compatible("PowerBook5,1") ||
+			   of_machine_is_compatible("PowerBook5,2") ||
+			   of_machine_is_compatible("PowerBook5,3") ||
+			   of_machine_is_compatible("PowerBook5,4") ||
+			   of_machine_is_compatible("PowerBook5,5")) {
 			/* powerbook with external single link tmds (sil164) */
 			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
-		} else if (machine_is_compatible("PowerBook5,6")) {
+		} else if (of_machine_is_compatible("PowerBook5,6")) {
 			/* powerbook with external dual or single link tmds */
 			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
-		} else if (machine_is_compatible("PowerBook5,7") ||
-			   machine_is_compatible("PowerBook5,8") ||
-			   machine_is_compatible("PowerBook5,9")) {
+		} else if (of_machine_is_compatible("PowerBook5,7") ||
+			   of_machine_is_compatible("PowerBook5,8") ||
+			   of_machine_is_compatible("PowerBook5,9")) {
 			/* PowerBook6,2 ? */
 			/* powerbook with external dual link tmds (sil1178?) */
 			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
-		} else if (machine_is_compatible("PowerBook4,1") ||
-			   machine_is_compatible("PowerBook4,2") ||
-			   machine_is_compatible("PowerBook4,3") ||
-			   machine_is_compatible("PowerBook6,3") ||
-			   machine_is_compatible("PowerBook6,5") ||
-			   machine_is_compatible("PowerBook6,7")) {
+		} else if (of_machine_is_compatible("PowerBook4,1") ||
+			   of_machine_is_compatible("PowerBook4,2") ||
+			   of_machine_is_compatible("PowerBook4,3") ||
+			   of_machine_is_compatible("PowerBook6,3") ||
+			   of_machine_is_compatible("PowerBook6,5") ||
+			   of_machine_is_compatible("PowerBook6,7")) {
 			/* ibook */
 			rdev->mode_info.connector_table = CT_IBOOK;
-		} else if (machine_is_compatible("PowerMac4,4")) {
+		} else if (of_machine_is_compatible("PowerMac4,4")) {
 			/* emac */
 			rdev->mode_info.connector_table = CT_EMAC;
-		} else if (machine_is_compatible("PowerMac10,1")) {
+		} else if (of_machine_is_compatible("PowerMac10,1")) {
 			/* mini with internal tmds */
 			rdev->mode_info.connector_table = CT_MINI_INTERNAL;
-		} else if (machine_is_compatible("PowerMac10,2")) {
+		} else if (of_machine_is_compatible("PowerMac10,2")) {
 			/* mini with external tmds */
 			rdev->mode_info.connector_table = CT_MINI_EXTERNAL;
-		} else if (machine_is_compatible("PowerMac12,1")) {
+		} else if (of_machine_is_compatible("PowerMac12,1")) {
 			/* PowerMac8,1 ? */
 			/* imac g5 isight */
 			rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 23741cec45e3..d840a109f833 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -322,8 +322,8 @@ static int __init adb_init(void)
 		adb_controller = NULL;
 	} else {
 #ifdef CONFIG_PPC
-		if (machine_is_compatible("AAPL,PowerBook1998") ||
-			machine_is_compatible("PowerBook1,1"))
+		if (of_machine_is_compatible("AAPL,PowerBook1998") ||
+			of_machine_is_compatible("PowerBook1,1"))
 			sleepy_trackpad = 1;
 #endif /* CONFIG_PPC */
 
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 454bc501df3c..5738d8bf2d97 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -1899,7 +1899,7 @@ static int create_control_loops(void)
 	 */
 	if (rackmac)
 		cpu_pid_type = CPU_PID_TYPE_RACKMAC;
-	else if (machine_is_compatible("PowerMac7,3")
+	else if (of_machine_is_compatible("PowerMac7,3")
 	    && (cpu_count > 1)
 	    && fcu_fans[CPUA_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID
 	    && fcu_fans[CPUB_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID) {
@@ -2234,10 +2234,10 @@ static int __init therm_pm72_init(void)
 {
 	struct device_node *np;
 
-	rackmac = machine_is_compatible("RackMac3,1");
+	rackmac = of_machine_is_compatible("RackMac3,1");
 
-	if (!machine_is_compatible("PowerMac7,2") &&
-	    !machine_is_compatible("PowerMac7,3") &&
+	if (!of_machine_is_compatible("PowerMac7,2") &&
+	    !of_machine_is_compatible("PowerMac7,3") &&
 	    !rackmac)
 	    	return -ENODEV;
 
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index ba48fd76396e..7fb8b4da35a7 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -490,7 +490,7 @@ g4fan_init( void )
 	info = of_get_property(np, "thermal-info", NULL);
 	of_node_put(np);
 
-	if( !info || !machine_is_compatible("PowerMac3,6") )
+	if( !info || !of_machine_is_compatible("PowerMac3,6") )
 		return -ENODEV;
 
 	if( info->id != 3 ) {
diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c
index a348bb0791d3..4f3c4479c16a 100644
--- a/drivers/macintosh/via-pmu-backlight.c
+++ b/drivers/macintosh/via-pmu-backlight.c
@@ -150,13 +150,13 @@ void __init pmu_backlight_init()
 
 	/* Special case for the old PowerBook since I can't test on it */
 	autosave =
-		machine_is_compatible("AAPL,3400/2400") ||
-		machine_is_compatible("AAPL,3500");
+		of_machine_is_compatible("AAPL,3400/2400") ||
+		of_machine_is_compatible("AAPL,3500");
 
 	if (!autosave &&
 	    !pmac_has_backlight_type("pmu") &&
-	    !machine_is_compatible("AAPL,PowerBook1998") &&
-	    !machine_is_compatible("PowerBook1,1"))
+	    !of_machine_is_compatible("AAPL,PowerBook1998") &&
+	    !of_machine_is_compatible("PowerBook1,1"))
 		return;
 
 	snprintf(name, sizeof(name), "pmubl");
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index db379c381432..42764849eb78 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -463,8 +463,8 @@ static int __init via_pmu_dev_init(void)
 #endif
 
 #ifdef CONFIG_PPC32
-  	if (machine_is_compatible("AAPL,3400/2400") ||
-  		machine_is_compatible("AAPL,3500")) {
+  	if (of_machine_is_compatible("AAPL,3400/2400") ||
+  		of_machine_is_compatible("AAPL,3500")) {
 		int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 			NULL, PMAC_MB_INFO_MODEL, 0);
 		pmu_battery_count = 1;
@@ -472,8 +472,8 @@ static int __init via_pmu_dev_init(void)
 			pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
 		else
 			pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
-	} else if (machine_is_compatible("AAPL,PowerBook1998") ||
-		machine_is_compatible("PowerBook1,1")) {
+	} else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
+		of_machine_is_compatible("PowerBook1,1")) {
 		pmu_battery_count = 2;
 		pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
 		pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 075b4d99e354..437f55c5d18d 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -468,9 +468,9 @@ static int __init windfarm_core_init(void)
 	DBG("wf: core loaded\n");
 
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 	platform_device_register(&wf_platform_device);
 	return 0;
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 900aade06198..1a77a7c97d0e 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -76,9 +76,9 @@ static int __init wf_cpufreq_clamp_init(void)
 	struct wf_control *clamp;
 
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index ed6426a10773..d8257d35afde 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -239,9 +239,9 @@ static struct i2c_driver wf_lm75_driver = {
 static int __init wf_lm75_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 	return i2c_add_driver(&wf_lm75_driver);
 }
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index a67b349319e9..b486eb929fde 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -188,9 +188,9 @@ static struct i2c_driver wf_max6690_driver = {
 static int __init wf_max6690_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 	return i2c_add_driver(&wf_max6690_driver);
 }
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
index 73d695dc9e50..e0ee80700cde 100644
--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -676,7 +676,7 @@ static int __init wf_pm112_init(void)
 {
 	struct device_node *cpu;
 
-	if (!machine_is_compatible("PowerMac11,2"))
+	if (!of_machine_is_compatible("PowerMac11,2"))
 		return -ENODEV;
 
 	/* Count the number of CPU cores */
diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c
index 66ec4fb115bb..947d4afa25ca 100644
--- a/drivers/macintosh/windfarm_pm121.c
+++ b/drivers/macintosh/windfarm_pm121.c
@@ -1008,7 +1008,7 @@ static int __init pm121_init(void)
 {
 	int rc = -ENODEV;
 
-	if (machine_is_compatible("PowerMac12,1"))
+	if (of_machine_is_compatible("PowerMac12,1"))
 		rc = pm121_init_pm();
 
 	if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index abbe206474f5..565d5b2adc95 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -779,8 +779,8 @@ static int __init wf_smu_init(void)
 {
 	int rc = -ENODEV;
 
-	if (machine_is_compatible("PowerMac8,1") ||
-	    machine_is_compatible("PowerMac8,2"))
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2"))
 		rc = wf_init_pm();
 
 	if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 764c525b2117..bea99168ff35 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -711,7 +711,7 @@ static int __init wf_smu_init(void)
 {
 	int rc = -ENODEV;
 
-	if (machine_is_compatible("PowerMac9,1"))
+	if (of_machine_is_compatible("PowerMac9,1"))
 		rc = wf_init_pm();
 
 	if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 9c567b93f417..3c193504bb80 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -363,9 +363,9 @@ smu_cpu_power_create(struct wf_sensor *volts, struct wf_sensor *amps)
 	 * I yet have to figure out what's up with 8,2 and will have to
 	 * adjust for later, unless we can 100% trust the SDB partition...
 	 */
-	if ((machine_is_compatible("PowerMac8,1") ||
-	     machine_is_compatible("PowerMac8,2") ||
-	     machine_is_compatible("PowerMac9,1")) &&
+	if ((of_machine_is_compatible("PowerMac8,1") ||
+	     of_machine_is_compatible("PowerMac8,2") ||
+	     of_machine_is_compatible("PowerMac9,1")) &&
 	    cpuvcp_version >= 2) {
 		pow->quadratic = 1;
 		DBG("windfarm: CPU Power using quadratic transform\n");
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index d9fbad386389..43aea91e3369 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -206,7 +206,7 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i
 		mp->port_aaui = port_aaui;
 	else {
 		/* Apple Network Server uses the AAUI port */
-		if (machine_is_compatible("AAPL,ShinerESB"))
+		if (of_machine_is_compatible("AAPL,ShinerESB"))
 			mp->port_aaui = 1;
 		else {
 #ifdef CONFIG_MACE_AAUI_PORT
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 785e9cc1b207..6bc8740c21ad 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -219,13 +219,13 @@ int of_device_is_compatible(const struct device_node *device,
 EXPORT_SYMBOL(of_device_is_compatible);
 
 /**
- * machine_is_compatible - Test root of device tree for a given compatible value
+ * of_machine_is_compatible - Test root of device tree for a given compatible value
  * @compat: compatible string to look for in root node's compatible property.
  *
  * Returns true if the root node has the given value in its
  * compatible property.
  */
-int machine_is_compatible(const char *compat)
+int of_machine_is_compatible(const char *compat)
 {
 	struct device_node *root;
 	int rc = 0;
@@ -237,7 +237,7 @@ int machine_is_compatible(const char *compat)
 	}
 	return rc;
 }
-EXPORT_SYMBOL(machine_is_compatible);
+EXPORT_SYMBOL(of_machine_is_compatible);
 
 /**
  *  of_device_is_available - check if a device is available for use
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 683e66f18e8c..3e2ae4807ae2 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -2031,9 +2031,9 @@ static int __init pmz_console_setup(struct console *co, char *options)
 	/*
 	 * XServe's default to 57600 bps
 	 */
-	if (machine_is_compatible("RackMac1,1")
-	    || machine_is_compatible("RackMac1,2")
-	    || machine_is_compatible("MacRISC4"))
+	if (of_machine_is_compatible("RackMac1,1")
+	    || of_machine_is_compatible("RackMac1,2")
+	    || of_machine_is_compatible("MacRISC4"))
 	 	baud = 57600;
 
 	/*
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index e4e4d433b007..9ee67d6da710 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1931,22 +1931,22 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
 			 * PowerMac2,2 summer 2000 iMacs
 			 * PowerMac4,1 january 2001 iMacs "flower power"
 			 */
-			if (machine_is_compatible("PowerMac2,1") ||
-			    machine_is_compatible("PowerMac2,2") ||
-			    machine_is_compatible("PowerMac4,1"))
+			if (of_machine_is_compatible("PowerMac2,1") ||
+			    of_machine_is_compatible("PowerMac2,2") ||
+			    of_machine_is_compatible("PowerMac4,1"))
 				default_vmode = VMODE_1024_768_75;
 
 			/* iBook SE */
-			if (machine_is_compatible("PowerBook2,2"))
+			if (of_machine_is_compatible("PowerBook2,2"))
 				default_vmode = VMODE_800_600_60;
 
 			/* PowerBook Firewire (Pismo), iBook Dual USB */
-			if (machine_is_compatible("PowerBook3,1") ||
-			    machine_is_compatible("PowerBook4,1"))
+			if (of_machine_is_compatible("PowerBook3,1") ||
+			    of_machine_is_compatible("PowerBook4,1"))
 				default_vmode = VMODE_1024_768_60;
 
 			/* PowerBook Titanium */
-			if (machine_is_compatible("PowerBook3,2"))
+			if (of_machine_is_compatible("PowerBook3,2"))
 				default_vmode = VMODE_1152_768_60;
 	
 			if (default_cmode > 16) 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 5f1b5807a48f..e45ab8db2ddc 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2439,7 +2439,7 @@ static int __devinit aty_init(struct fb_info *info)
 	 * The Apple iBook1 uses non-standard memory frequencies.
 	 * We detect it and set the frequency manually.
 	 */
-	if (machine_is_compatible("PowerBook2,1")) {
+	if (of_machine_is_compatible("PowerBook2,1")) {
 		par->pll_limits.mclk = 70;
 		par->pll_limits.xclk = 53;
 	}
@@ -2659,7 +2659,7 @@ static int __devinit aty_init(struct fb_info *info)
 		      FBINFO_HWACCEL_YPAN;
 
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (M64_HAS(G3_PB_1_1) && machine_is_compatible("PowerBook1,1")) {
+	if (M64_HAS(G3_PB_1_1) && of_machine_is_compatible("PowerBook1,1")) {
 		/*
 		 * these bits let the 101 powerbook
 		 * wake up from sleep -- paulus
@@ -2690,9 +2690,9 @@ static int __devinit aty_init(struct fb_info *info)
 				if (M64_HAS(G3_PB_1024x768))
 					/* G3 PowerBook with 1024x768 LCD */
 					default_vmode = VMODE_1024_768_60;
-				else if (machine_is_compatible("iMac"))
+				else if (of_machine_is_compatible("iMac"))
 					default_vmode = VMODE_1024_768_75;
-				else if (machine_is_compatible("PowerBook2,1"))
+				else if (of_machine_is_compatible("PowerBook2,1"))
 					/* iBook with 800x600 LCD */
 					default_vmode = VMODE_800_600_60;
 				else
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index 1a056adb61c8..fa1198c4ccc5 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -175,9 +175,9 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo)
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	pdata->negative = pdata->negative ||
-		machine_is_compatible("PowerBook4,3") ||
-		machine_is_compatible("PowerBook6,3") ||
-		machine_is_compatible("PowerBook6,5");
+		of_machine_is_compatible("PowerBook4,3") ||
+		of_machine_is_compatible("PowerBook6,3") ||
+		of_machine_is_compatible("PowerBook6,5");
 #endif
 
 	rinfo->info->bl_dev = bd;
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 8118d4559dd5..fbf29610616d 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -85,7 +85,7 @@ extern int early_init_dt_scan_root(unsigned long node, const char *uname,
 extern void finish_device_tree(void);
 extern void unflatten_device_tree(void);
 extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
+extern int of_machine_is_compatible(const char *compat);
 extern void print_properties(struct device_node *node);
 extern int prom_n_intr_cells(struct device_node* np);
 extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 2e156467b814..b36679384b27 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -751,8 +751,8 @@ static void snd_pmac_awacs_suspend(struct snd_pmac *chip)
 
 static void snd_pmac_awacs_resume(struct snd_pmac *chip)
 {
-	if (machine_is_compatible("PowerBook3,1")
-	    || machine_is_compatible("PowerBook3,2")) {
+	if (of_machine_is_compatible("PowerBook3,1")
+	    || of_machine_is_compatible("PowerBook3,2")) {
 		msleep(100);
 		snd_pmac_awacs_write_reg(chip, 1,
 			chip->awacs_reg[1] & ~MASK_PAROUT);
@@ -780,16 +780,16 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip)
 }
 #endif /* CONFIG_PM */
 
-#define IS_PM7500 (machine_is_compatible("AAPL,7500") \
-		|| machine_is_compatible("AAPL,8500") \
-		|| machine_is_compatible("AAPL,9500"))
-#define IS_PM5500 (machine_is_compatible("AAPL,e411"))
-#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer"))
-#define IS_IMAC1 (machine_is_compatible("PowerMac2,1"))
-#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \
-		|| machine_is_compatible("PowerMac4,1"))
-#define IS_G4AGP (machine_is_compatible("PowerMac3,1"))
-#define IS_LOMBARD (machine_is_compatible("PowerBook1,1"))
+#define IS_PM7500 (of_machine_is_compatible("AAPL,7500") \
+		|| of_machine_is_compatible("AAPL,8500") \
+		|| of_machine_is_compatible("AAPL,9500"))
+#define IS_PM5500 (of_machine_is_compatible("AAPL,e411"))
+#define IS_BEIGE (of_machine_is_compatible("AAPL,Gossamer"))
+#define IS_IMAC1 (of_machine_is_compatible("PowerMac2,1"))
+#define IS_IMAC2 (of_machine_is_compatible("PowerMac2,2") \
+		|| of_machine_is_compatible("PowerMac4,1"))
+#define IS_G4AGP (of_machine_is_compatible("PowerMac3,1"))
+#define IS_LOMBARD (of_machine_is_compatible("PowerBook1,1"))
 
 static int imac1, imac2;
 
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 0accfe49735b..1f72e1c786bf 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -582,7 +582,7 @@ static int snd_pmac_burgundy_detect_headphone(struct snd_pmac *chip)
 static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_notify)
 {
 	if (chip->auto_mute) {
-		int imac = machine_is_compatible("iMac");
+		int imac = of_machine_is_compatible("iMac");
 		int reg, oreg;
 		reg = oreg = snd_pmac_burgundy_rcb(chip,
 				MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES);
@@ -620,7 +620,7 @@ static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_noti
  */
 int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip)
 {
-	int imac = machine_is_compatible("iMac");
+	int imac = of_machine_is_compatible("iMac");
 	int i, err;
 
 	/* Checks to see the chip is alive and kicking */
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 7bc492ee77ec..85081172403f 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -922,11 +922,11 @@ static void __devinit detect_byte_swap(struct snd_pmac *chip)
 	}
 
 	/* it seems the Pismo & iBook can't byte-swap in hardware. */
-	if (machine_is_compatible("PowerBook3,1") ||
-	    machine_is_compatible("PowerBook2,1"))
+	if (of_machine_is_compatible("PowerBook3,1") ||
+	    of_machine_is_compatible("PowerBook2,1"))
 		chip->can_byte_swap = 0 ;
 
-	if (machine_is_compatible("PowerBook2,1"))
+	if (of_machine_is_compatible("PowerBook2,1"))
 		chip->can_duplex = 0;
 }
 
@@ -959,11 +959,11 @@ static int __devinit snd_pmac_detect(struct snd_pmac *chip)
 	chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
 
 	/* check machine type */
-	if (machine_is_compatible("AAPL,3400/2400")
-	    || machine_is_compatible("AAPL,3500"))
+	if (of_machine_is_compatible("AAPL,3400/2400")
+	    || of_machine_is_compatible("AAPL,3500"))
 		chip->is_pbook_3400 = 1;
-	else if (machine_is_compatible("PowerBook1,1")
-		 || machine_is_compatible("AAPL,PowerBook1998"))
+	else if (of_machine_is_compatible("PowerBook1,1")
+		 || of_machine_is_compatible("AAPL,PowerBook1998"))
 		chip->is_pbook_G3 = 1;
 	chip->node = of_find_node_by_name(NULL, "awacs");
 	sound = of_node_get(chip->node);
@@ -1033,8 +1033,8 @@ static int __devinit snd_pmac_detect(struct snd_pmac *chip)
 	}
 	if (of_device_is_compatible(sound, "tumbler")) {
 		chip->model = PMAC_TUMBLER;
-		chip->can_capture = machine_is_compatible("PowerMac4,2")
-				|| machine_is_compatible("PowerBook4,1");
+		chip->can_capture = of_machine_is_compatible("PowerMac4,2")
+				|| of_machine_is_compatible("PowerBook4,1");
 		chip->can_duplex = 0;
 		// chip->can_byte_swap = 0; /* FIXME: check this */
 		chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 3326e2a1e863..1a5b8e0d6a34 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -55,7 +55,7 @@ static __init int efika_fabric_init(void)
 	struct platform_device *pdev;
 	int rc;
 
-	if (!machine_is_compatible("bplan,efika"))
+	if (!of_machine_is_compatible("bplan,efika"))
 		return -ENODEV;
 
 	card.platform = &mpc5200_audio_dma_platform;
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index b928ef7d28eb..6644cba7cbf2 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -55,7 +55,7 @@ static __init int pcm030_fabric_init(void)
 	struct platform_device *pdev;
 	int rc;
 
-	if (!machine_is_compatible("phytec,pcm030"))
+	if (!of_machine_is_compatible("phytec,pcm030"))
 		return -ENODEV;
 
 	card.platform = &mpc5200_audio_dma_platform;
-- 
cgit v1.2.3


From 6c8afef551fef87a3bf24f8a74c69a7f2f72fc82 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Tue, 9 Feb 2010 10:07:00 +0530
Subject: ath9k: Fix sequence numbers for PAE frames

Currently, PAE frames are not assigned proper sequence numbers.
Since sending PAE frames as part of aggregates breaks
crupto with several APs, they are sent as normal MPDUs.
Fix the seqeuence number issue by updating the frame with the
internal sequence number.

Tested-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fa12b9060b0b..29bf33692f71 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1615,7 +1615,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 		bf->bf_frmlen -= padsize;
 	}
 
-	if (conf_is_ht(&hw->conf) && !is_pae(skb))
+	if (conf_is_ht(&hw->conf))
 		bf->bf_state.bf_type |= BUF_HT;
 
 	bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
@@ -1701,7 +1701,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
 			goto tx_done;
 		}
 
-		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+		if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
 			/*
 			 * Try aggregation if it's a unicast data frame
 			 * and the destination is HT capable.
-- 
cgit v1.2.3


From 33a5d083e786f0c3fb4efedb59b0e8e3de39963b Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 9 Feb 2010 12:07:41 +0100
Subject: iwmc3200wifi: Test of wrong pointer after kzalloc in
 iwm_mlme_update_bss_table()

The wrong pointer was tested.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwmc3200wifi/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 3db3d8b07491..64d16fe37f9a 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -794,7 +794,7 @@ static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf,
 	}
 
 	bss->bss = kzalloc(bss_len, GFP_KERNEL);
-	if (!bss) {
+	if (!bss->bss) {
 		kfree(bss);
 		IWM_ERR(iwm, "Couldn't allocate bss\n");
 		return -ENOMEM;
-- 
cgit v1.2.3


From 05df49865be08b30e7ba91b9d3d94d7d52dd3033 Mon Sep 17 00:00:00 2001
From: Vivek Natarajan <vnatarajan@atheros.com>
Date: Tue, 9 Feb 2010 11:34:50 +0530
Subject: ath9k: Enable IEEE80211_HW_REPORTS_TX_ACK_STATUS flag for ath9k.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 4b5e54848683..623c2f884987 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -622,7 +622,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		IEEE80211_HW_SIGNAL_DBM |
 		IEEE80211_HW_SUPPORTS_PS |
 		IEEE80211_HW_PS_NULLFUNC_STACK |
-		IEEE80211_HW_SPECTRUM_MGMT;
+		IEEE80211_HW_SPECTRUM_MGMT |
+		IEEE80211_HW_REPORTS_TX_ACK_STATUS;
 
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
 		 hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
-- 
cgit v1.2.3


From 174b24963eaf96dc5e093502ee09639aed13eb2f Mon Sep 17 00:00:00 2001
From: Jelle Martijn Kok <jmkok@solutionsradio.com>
Date: Wed, 10 Feb 2010 09:34:09 -0600
Subject: rtl8187: Add new device ID

Add new RTL8187B device.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187_dev.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index bc5726dd5fe4..7ba3052b0708 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -65,6 +65,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
 	/* Sphairon Access Systems GmbH */
 	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
 	/* Dick Smith Electronics */
-- 
cgit v1.2.3


From d6cade0f7f40834ff3b48f2469d00b1be0ea0db6 Mon Sep 17 00:00:00 2001
From: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date: Tue, 9 Feb 2010 23:37:54 +0000
Subject: via-velocity: Remove unused IRQ status parameter from rx_srv and
 tx_srv

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/via-velocity.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c93f58f5c6f2..133069738ba0 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1877,13 +1877,12 @@ static void velocity_error(struct velocity_info *vptr, int status)
 /**
  *	tx_srv		-	transmit interrupt service
  *	@vptr; Velocity
- *	@status:
  *
  *	Scan the queues looking for transmitted packets that
  *	we can complete and clean up. Update any statistics as
  *	necessary/
  */
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+static int velocity_tx_srv(struct velocity_info *vptr)
 {
 	struct tx_desc *td;
 	int qnum;
@@ -2090,14 +2089,12 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 /**
  *	velocity_rx_srv		-	service RX interrupt
  *	@vptr: velocity
- *	@status: adapter status (unused)
  *
  *	Walk the receive ring of the velocity adapter and remove
  *	any received packets from the receive queue. Hand the ring
  *	slots back to the adapter for reuse.
  */
-static int velocity_rx_srv(struct velocity_info *vptr, int status,
-		int budget_left)
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
 {
 	struct net_device_stats *stats = &vptr->dev->stats;
 	int rd_curr = vptr->rx.curr;
@@ -2165,10 +2162,10 @@ static int velocity_poll(struct napi_struct *napi, int budget)
 	 * Do rx and tx twice for performance (taken from the VIA
 	 * out-of-tree driver).
 	 */
-	rx_done = velocity_rx_srv(vptr, isr_status, budget / 2);
-	velocity_tx_srv(vptr, isr_status);
-	rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done);
-	velocity_tx_srv(vptr, isr_status);
+	rx_done = velocity_rx_srv(vptr, budget / 2);
+	velocity_tx_srv(vptr);
+	rx_done += velocity_rx_srv(vptr, budget - rx_done);
+	velocity_tx_srv(vptr);
 
 	spin_unlock(&vptr->lock);
 
@@ -3100,7 +3097,7 @@ static int velocity_resume(struct pci_dev *pdev)
 	velocity_init_registers(vptr, VELOCITY_INIT_WOL);
 	mac_disable_int(vptr->mac_regs);
 
-	velocity_tx_srv(vptr, 0);
+	velocity_tx_srv(vptr);
 
 	for (i = 0; i < vptr->tx.numq; i++) {
 		if (vptr->tx.used[i])
-- 
cgit v1.2.3


From 39c2ff43ea3830ccc693f965abdace96e514b1c5 Mon Sep 17 00:00:00 2001
From: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date: Tue, 9 Feb 2010 23:38:07 +0000
Subject: via-velocity: Take spinlock on set coalesce

velocity_set_coalesce touches ISR and some other sensitive registers not
covered by the rtnl lock, so take the velocity spinlock.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/via-velocity.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 133069738ba0..54bafdab1f9d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -3341,6 +3341,7 @@ static int velocity_set_coalesce(struct net_device *dev,
 {
 	struct velocity_info *vptr = netdev_priv(dev);
 	int max_us = 0x3f * 64;
+	unsigned long flags;
 
 	/* 6 bits of  */
 	if (ecmd->tx_coalesce_usecs > max_us)
@@ -3362,6 +3363,7 @@ static int velocity_set_coalesce(struct net_device *dev,
 			ecmd->tx_coalesce_usecs);
 
 	/* Setup the interrupt suppression and queue timers */
+	spin_lock_irqsave(&vptr->lock, flags);
 	mac_disable_int(vptr->mac_regs);
 	setup_adaptive_interrupts(vptr);
 	setup_queue_timers(vptr);
@@ -3369,6 +3371,7 @@ static int velocity_set_coalesce(struct net_device *dev,
 	mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
 	mac_clear_isr(vptr->mac_regs);
 	mac_enable_int(vptr->mac_regs);
+	spin_unlock_irqrestore(&vptr->lock, flags);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 3f2e8d9f13246382fbda6f03178eef867a9bfbe2 Mon Sep 17 00:00:00 2001
From: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date: Tue, 9 Feb 2010 23:38:25 +0000
Subject: via-velocity: Fix races on shared interrupts

This patch fixes two potential races in the velocity driver:

* Move the ACK and error handler to the interrupt handler. This fixes a
  potential race with shared interrupts when the other device interrupts
  before the NAPI poll handler has finished. As the velocity driver hasn't
  acked it's own interrupt, it will then steal the interrupt from the
  other device.

* Use spin_lock_irqsave in velocity_poll. In the current code, the
  interrupt handler will deadlock if e.g., the NAPI poll handler is
  executing when an interrupt (for another device) comes in since it
  tries to take the already held lock.

  Also unlock the spinlock only after enabling the interrupt in
  velocity_poll.

The error path is moved to the interrupt handler since this is where the
ISR is checked now.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Anders Grafstrom <anders.grafstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/via-velocity.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 54bafdab1f9d..317aa34b21cf 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2148,16 +2148,9 @@ static int velocity_poll(struct napi_struct *napi, int budget)
 	struct velocity_info *vptr = container_of(napi,
 			struct velocity_info, napi);
 	unsigned int rx_done;
-	u32 isr_status;
-
-	spin_lock(&vptr->lock);
-	isr_status = mac_read_isr(vptr->mac_regs);
-
-	/* Ack the interrupt */
-	mac_write_isr(vptr->mac_regs, isr_status);
-	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-		velocity_error(vptr, isr_status);
+	unsigned long flags;
 
+	spin_lock_irqsave(&vptr->lock, flags);
 	/*
 	 * Do rx and tx twice for performance (taken from the VIA
 	 * out-of-tree driver).
@@ -2167,13 +2160,12 @@ static int velocity_poll(struct napi_struct *napi, int budget)
 	rx_done += velocity_rx_srv(vptr, budget - rx_done);
 	velocity_tx_srv(vptr);
 
-	spin_unlock(&vptr->lock);
-
 	/* If budget not fully consumed, exit the polling mode */
 	if (rx_done < budget) {
 		napi_complete(napi);
 		mac_enable_int(vptr->mac_regs);
 	}
+	spin_unlock_irqrestore(&vptr->lock, flags);
 
 	return rx_done;
 }
@@ -2203,10 +2195,17 @@ static irqreturn_t velocity_intr(int irq, void *dev_instance)
 		return IRQ_NONE;
 	}
 
+	/* Ack the interrupt */
+	mac_write_isr(vptr->mac_regs, isr_status);
+
 	if (likely(napi_schedule_prep(&vptr->napi))) {
 		mac_disable_int(vptr->mac_regs);
 		__napi_schedule(&vptr->napi);
 	}
+
+	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+		velocity_error(vptr, isr_status);
+
 	spin_unlock(&vptr->lock);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From 633e7533cec78b99d806248e832fc83e689d2453 Mon Sep 17 00:00:00 2001
From: Rob Herring <r.herring@freescale.com>
Date: Fri, 5 Feb 2010 08:56:20 +0000
Subject: fec: fix uninitialized rx buffer usage

The fec driver was enabling receive buffer descriptor without allocating
the buffers. Make sure the buffer descriptors are initialized to not
start receiving packets.

Open also calls fec_restart after the rx buffers are allocated. With the code
in fec_restart, it zeroes out the buffer descriptors that have just been
setup.

Signed-off-by: Rob Herring <r.herring@freescale.com>
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fec.c | 57 ++++++++++++++++++++++++++++---------------------------
 1 file changed, 29 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 16a1d58419d9..9a8743daa3e5 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1658,6 +1658,7 @@ static int fec_enet_init(struct net_device *dev, int index)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct bufdesc *cbd_base;
+	struct bufdesc *bdp;
 	int i;
 
 	/* Allocate memory for buffer descriptors. */
@@ -1710,6 +1711,34 @@ static int fec_enet_init(struct net_device *dev, int index)
 	/* Set MII speed to 2.5 MHz */
 	fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
 					/ 2500000) / 2) & 0x3F) << 1;
+
+	/* Initialize the receive buffer descriptors. */
+	bdp = fep->rx_bd_base;
+	for (i = 0; i < RX_RING_SIZE; i++) {
+
+		/* Initialize the BD for every fragment in the page. */
+		bdp->cbd_sc = 0;
+		bdp++;
+	}
+
+	/* Set the last buffer to wrap */
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+
+	/* ...and the same for transmit */
+	bdp = fep->tx_bd_base;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+
+		/* Initialize the BD for every fragment in the page. */
+		bdp->cbd_sc = 0;
+		bdp->cbd_bufaddr = 0;
+		bdp++;
+	}
+
+	/* Set the last buffer to wrap */
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+
 	fec_restart(dev, 0);
 
 	/* Queue up command to detect the PHY and initialize the
@@ -1730,7 +1759,6 @@ static void
 fec_restart(struct net_device *dev, int duplex)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
-	struct bufdesc *bdp;
 	int i;
 
 	/* Whack a reset.  We should wait for this. */
@@ -1768,33 +1796,6 @@ fec_restart(struct net_device *dev, int duplex)
 		}
 	}
 
-	/* Initialize the receive buffer descriptors. */
-	bdp = fep->rx_bd_base;
-	for (i = 0; i < RX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page. */
-		bdp->cbd_sc = BD_ENET_RX_EMPTY;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap */
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* ...and the same for transmit */
-	bdp = fep->tx_bd_base;
-	for (i = 0; i < TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page. */
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap */
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
 	/* Enable MII mode */
 	if (duplex) {
 		/* MII enable / FD enable */
-- 
cgit v1.2.3


From fceb2919192d7a667be81c17c0bfa227fd7fa992 Mon Sep 17 00:00:00 2001
From: Amit Kucheria <amit.kucheria@canonical.com>
Date: Fri, 5 Feb 2010 08:56:21 +0000
Subject: fec: Add LAN8700 phy support

The i.MX51 babbage board has a FEC ethernet controller with this phy.

In the long term we should resurrect the phylib patches for fec.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fec.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 9a8743daa3e5..5d0d33268155 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1128,6 +1128,26 @@ static phy_info_t phy_info_dp83848= {
 	},
 };
 
+static phy_info_t phy_info_lan8700 = {
+	0x0007C0C,
+	"LAN8700",
+	(const phy_cmd_t []) { /* config */
+		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
+		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+		{ mk_mii_end, }
+	},
+	(const phy_cmd_t []) { /* startup */
+		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
+		{ mk_mii_end, }
+	},
+	(const phy_cmd_t []) { /* act_int */
+		{ mk_mii_end, }
+	},
+	(const phy_cmd_t []) { /* shutdown */
+		{ mk_mii_end, }
+	},
+};
 /* ------------------------------------------------------------------------- */
 
 static phy_info_t const * const phy_info[] = {
@@ -1137,6 +1157,7 @@ static phy_info_t const * const phy_info[] = {
 	&phy_info_am79c874,
 	&phy_info_ks8721bl,
 	&phy_info_dp83848,
+	&phy_info_lan8700,
 	NULL
 };
 
-- 
cgit v1.2.3


From bd011e8826978b0f6cd0f929edec353fd755f49b Mon Sep 17 00:00:00 2001
From: Amit Kucheria <amit.kucheria@canonical.com>
Date: Fri, 5 Feb 2010 08:56:22 +0000
Subject: fec: Add ARCH_MX5 as a dependency

i.MX51 babbage board has a FEC ethernet controller

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ef662e15c3d3..1bf1987571ff 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1895,7 +1895,8 @@ config 68360_ENET
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
+		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
-- 
cgit v1.2.3


From 2ac2927a953a01c83df255118922cce1523d1a18 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Tue, 9 Feb 2010 13:06:54 -0500
Subject: ath5k: use correct packet type when transmitting

The hardware needs to know what type of frames are being
sent in order to fill in various fields, for example the
timestamp in probe responses (before this patch, it was
always 0).  Set it correctly when initializing the TX
descriptor.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/ath5k.h |  1 -
 drivers/net/wireless/ath/ath5k/base.c  | 26 +++++++++++++++++++++++++-
 2 files changed, 25 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index ad4d446f0264..ac67f02e26d8 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -541,7 +541,6 @@ struct ath5k_txq_info {
 /*
  * Transmit packet types.
  * used on tx control descriptor
- * TODO: Use them inside base.c corectly
  */
 enum ath5k_pkt_type {
 	AR5K_PKT_TYPE_NORMAL		= 0,
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 97d642575550..2468c64d6c12 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1246,6 +1246,29 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	return 0;
 }
 
+static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr;
+	enum ath5k_pkt_type htype;
+	__le16 fc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+
+	if (ieee80211_is_beacon(fc))
+		htype = AR5K_PKT_TYPE_BEACON;
+	else if (ieee80211_is_probe_resp(fc))
+		htype = AR5K_PKT_TYPE_PROBE_RESP;
+	else if (ieee80211_is_atim(fc))
+		htype = AR5K_PKT_TYPE_ATIM;
+	else if (ieee80211_is_pspoll(fc))
+		htype = AR5K_PKT_TYPE_PSPOLL;
+	else
+		htype = AR5K_PKT_TYPE_NORMAL;
+
+	return htype;
+}
+
 static int
 ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 		  struct ath5k_txq *txq)
@@ -1300,7 +1323,8 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 			sc->vif, pktlen, info));
 	}
 	ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
-		ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
+		ieee80211_get_hdrlen_from_skb(skb),
+		get_hw_packet_type(skb),
 		(sc->power_level * 2),
 		hw_rate,
 		info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
-- 
cgit v1.2.3


From f32338319f10c4ca5499c19edc5b3618896920ba Mon Sep 17 00:00:00 2001
From: Deepak Saxena <dsaxena@plexity.net>
Date: Tue, 9 Feb 2010 13:35:43 -0800
Subject: Add Station and AdHoc mode support to libertas_tf

Add support for using the libertas_tf driver on a managed
or ad-hoc network.

Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas_tf/main.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index ba3eb0101d55..6ab30033c26c 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -555,6 +555,9 @@ struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev)
 	priv->band.n_channels = ARRAY_SIZE(lbtf_channels);
 	priv->band.channels = priv->channels;
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
 	skb_queue_head_init(&priv->bc_ps_buf);
 
 	SET_IEEE80211_DEV(hw, dmdev);
-- 
cgit v1.2.3


From a0db28b898266265c1cc2ff84f041a561a265504 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Sun, 7 Feb 2010 06:23:53 +0000
Subject: sky2: resume clocks

Change the resume path to use pci write config for a couple of reasons:
1. pci_write_config_dword() allows for more error
   checking of PCI health after resume.

2. better to toggle this register on all chip types, since that
   is what vendor driver does.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 744362272e2d..1593ed49e8fe 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4859,10 +4859,11 @@ static int sky2_resume(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D0, 0);
 
 	/* Re-enable all clocks */
-	if (hw->chip_id == CHIP_ID_YUKON_EX ||
-	    hw->chip_id == CHIP_ID_YUKON_EC_U ||
-	    hw->chip_id == CHIP_ID_YUKON_FE_P)
-		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+	err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+	if (err) {
+		dev_err(&pdev->dev, "PCI write config failed\n");
+		goto out;
+	}
 
 	sky2_reset(hw);
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
-- 
cgit v1.2.3


From acd12dde26eef5186a9d2ead9399d136932d2398 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Sun, 7 Feb 2010 06:24:50 +0000
Subject: sky2: disable ASF on Yukon Supreme

Clone of vendor code to disable ASF on Extreme and Supreme chips.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1593ed49e8fe..1aa1f3316702 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3035,11 +3035,20 @@ static void sky2_reset(struct sky2_hw *hw)
 	u32 hwe_mask = Y2_HWE_ALL_MASK;
 
 	/* disable ASF */
-	if (hw->chip_id == CHIP_ID_YUKON_EX) {
+	if (hw->chip_id == CHIP_ID_YUKON_EX
+	    || hw->chip_id == CHIP_ID_YUKON_SUPR) {
+		sky2_write32(hw, CPU_WDOG, 0);
 		status = sky2_read16(hw, HCU_CCSR);
 		status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
 			    HCU_CCSR_UC_STATE_MSK);
+		/*
+		 * CPU clock divider shouldn't be used because
+		 * - ASF firmware may malfunction
+		 * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
+		 */
+		status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
 		sky2_write16(hw, HCU_CCSR, status);
+		sky2_write32(hw, CPU_WDOG, 0);
 	} else
 		sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
 	sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
-- 
cgit v1.2.3


From 375c568844e49d292885c7485d4a255f71680e56 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Sun, 7 Feb 2010 06:28:36 +0000
Subject: sky2: receive checksum refactoring

Break the largish case for handling receive checksum into a separate
function, and if there is a problem use dev_XXX routines to
show which hardware is the problem.

Turn one corner case into a BUG().  This only happens if the driver
is expecting one behavior but the chip does the old behavior;
only ever saw this when bringing up a new chip type and driver
was buggy.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 59 ++++++++++++++++++++++++++----------------------------
 1 file changed, 28 insertions(+), 31 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1aa1f3316702..478288b8bc21 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2484,6 +2484,32 @@ static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
 	}
 }
 
+static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
+{
+	/* If this happens then driver assuming wrong format for chip type */
+	BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
+
+	/* Both checksum counters are programmed to start at
+	 * the same offset, so unless there is a problem they
+	 * should match. This failure is an early indication that
+	 * hardware receive checksumming won't work.
+	 */
+	if (likely((u16)(status >> 16) == (u16)status)) {
+		struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
+		skb->ip_summed = CHECKSUM_COMPLETE;
+		skb->csum = le16_to_cpu(status);
+	} else {
+		dev_notice(&sky2->hw->pdev->dev,
+			   "%s: receive checksum problem (status = %#x)\n",
+			   sky2->netdev->name, status);
+
+		/* Disable checksum offload */
+		sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
+		sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+			     BMU_DIS_RX_CHKSUM);
+	}
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 {
@@ -2552,37 +2578,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			/* fall through */
 #endif
 		case OP_RXCHKS:
-			if (!(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
-				break;
-
-			/* If this happens then driver assuming wrong format */
-			if (unlikely(hw->flags & SKY2_HW_NEW_LE)) {
-				if (net_ratelimit())
-					printk(KERN_NOTICE "%s: unexpected"
-					       " checksum status\n",
-					       dev->name);
-				break;
-			}
-
-			/* Both checksum counters are programmed to start at
-			 * the same offset, so unless there is a problem they
-			 * should match. This failure is an early indication that
-			 * hardware receive checksumming won't work.
-			 */
-			if (likely(status >> 16 == (status & 0xffff))) {
-				skb = sky2->rx_ring[sky2->rx_next].skb;
-				skb->ip_summed = CHECKSUM_COMPLETE;
-				skb->csum = le16_to_cpu(status);
-			} else {
-				printk(KERN_NOTICE PFX "%s: hardware receive "
-				       "checksum problem (status = %#x)\n",
-				       dev->name, status);
-				sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
-
-				sky2_write32(sky2->hw,
-					     Q_ADDR(rxqaddr[port], Q_CSR),
-					     BMU_DIS_RX_CHKSUM);
-			}
+			if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
+				sky2_rx_checksum(sky2, status);
 			break;
 
 		case OP_TXINDEXLE:
-- 
cgit v1.2.3


From 9a713e7c7cca2f31c89367bb7b48310ab8a3e630 Mon Sep 17 00:00:00 2001
From: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Date: Wed, 10 Feb 2010 16:07:54 +0000
Subject: ixgbe: Add support for the new ethtool n-tuple programming interface

This patch adds n-tuple filter programming to 82599.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h         |   4 ++
 drivers/net/ixgbe/ixgbe_82599.c   | 106 +++++++++++++++++++++++++++++++-----
 drivers/net/ixgbe/ixgbe_ethtool.c | 111 ++++++++++++++++++++++++++++++++++++--
 drivers/net/ixgbe/ixgbe_main.c    |  16 +++++-
 drivers/net/ixgbe/ixgbe_type.h    |   9 ++++
 5 files changed, 228 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index bffbe0d52d33..19e94ee155a2 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -453,6 +453,10 @@ extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
 extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
                                                  struct ixgbe_atr_input *input,
                                                  u8 queue);
+extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+                                      struct ixgbe_atr_input *input,
+                                      struct ixgbe_atr_input_masks *input_masks,
+                                      u16 soft_id, u8 queue);
 extern s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input,
                                        u16 vlan_id);
 extern s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index d4ed6adb7975..4fa8633fae3c 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1439,6 +1439,9 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
 	/* Send interrupt when 64 filters are left */
 	fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
 
+	/* Initialize the drop queue to Rx queue 127 */
+	fdirctrl |= (127 << IXGBE_FDIRCTRL_DROP_Q_SHIFT);
+
 	switch (pballoc) {
 	case IXGBE_FDIR_PBALLOC_64K:
 		/* 2k - 1 perfect filters */
@@ -1628,6 +1631,7 @@ static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
  *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
  *  @input: input stream to modify
  *  @vlan: the VLAN id to load
+ *  @vlan_mask: bitwise mask for the VLAN
  **/
 s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
 {
@@ -1641,6 +1645,7 @@ s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
  *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
  *  @input: input stream to modify
  *  @src_addr: the IP address to load
+ *  @src_addr_mask: bitwise mask for the source IP address
  **/
 s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
 {
@@ -1658,6 +1663,7 @@ s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
  *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
  *  @input: input stream to modify
  *  @dst_addr: the IP address to load
+ *  @dst_addr_mask: bitwise mask for the destination IP address
  **/
 s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
 {
@@ -1680,8 +1686,8 @@ s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
  *  @src_addr_4: the fourth 4 bytes of the IP address to load
  **/
 s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
-                                        u32 src_addr_1, u32 src_addr_2,
-                                        u32 src_addr_3, u32 src_addr_4)
+                                 u32 src_addr_1, u32 src_addr_2,
+                                 u32 src_addr_3, u32 src_addr_4)
 {
 	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET] = src_addr_4 & 0xff;
 	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] =
@@ -1723,8 +1729,8 @@ s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
  *  @dst_addr_4: the fourth 4 bytes of the IP address to load
  **/
 s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
-                                        u32 dst_addr_1, u32 dst_addr_2,
-                                        u32 dst_addr_3, u32 dst_addr_4)
+                                 u32 dst_addr_1, u32 dst_addr_2,
+                                 u32 dst_addr_3, u32 dst_addr_4)
 {
 	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET] = dst_addr_4 & 0xff;
 	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] =
@@ -1761,6 +1767,7 @@ s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
  *  ixgbe_atr_set_src_port_82599 - Sets the source port
  *  @input: input stream to modify
  *  @src_port: the source port to load
+ *  @src_port_mask: bitwise mask for the source port
  **/
 s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
 {
@@ -1774,6 +1781,7 @@ s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
  *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
  *  @input: input stream to modify
  *  @dst_port: the destination port to load
+ *  @dst_port_mask: bitwise mask for the destination port
  **/
 s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
 {
@@ -1802,7 +1810,7 @@ s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
  *  @vm_pool: the Virtual Machine pool to load
  **/
 s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input,
-                                       u8 vm_pool)
+                                u8 vm_pool)
 {
 	input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET] = vm_pool;
 
@@ -1826,8 +1834,7 @@ s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
  *  @input: input stream to search
  *  @vlan: the VLAN id to load
  **/
-static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input,
-                                       u16 *vlan)
+static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
 {
 	*vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
 	*vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
@@ -2083,23 +2090,26 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
  *  ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
  *  @hw: pointer to hardware structure
  *  @input: input bitstream
+ *  @input_masks: bitwise masks for relevant fields
+ *  @soft_id: software index into the silicon hash tables for filter storage
  *  @queue: queue index to direct traffic to
  *
  *  Note that the caller to this function must lock before calling, since the
  *  hardware writes must be protected from one another.
  **/
 s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
-                                               struct ixgbe_atr_input *input,
-                                               u16 soft_id,
-                                               u8 queue)
+                                      struct ixgbe_atr_input *input,
+                                      struct ixgbe_atr_input_masks *input_masks,
+                                      u16 soft_id, u8 queue)
 {
 	u32 fdircmd = 0;
 	u32 fdirhash;
-	u32 src_ipv4, dst_ipv4;
+	u32 src_ipv4 = 0, dst_ipv4 = 0;
 	u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
 	u16 src_port, dst_port, vlan_id, flex_bytes;
 	u16 bucket_hash;
 	u8  l4type;
+	u8  fdirm = 0;
 
 	/* Get our input values */
 	ixgbe_atr_get_l4type_82599(input, &l4type);
@@ -2154,7 +2164,6 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
 		/* IPv4 */
 		ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
 		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
-
 	}
 
 	ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
@@ -2163,7 +2172,78 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
 	                            (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
-	                       (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
+	              (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
+
+	/*
+	 * Program the relevant mask registers.  If src/dst_port or src/dst_addr
+	 * are zero, then assume a full mask for that field.  Also assume that
+	 * a VLAN of 0 is unspecified, so mask that out as well.  L4type
+	 * cannot be masked out in this implementation.
+	 *
+	 * This also assumes IPv4 only.  IPv6 masking isn't supported at this
+	 * point in time.
+	 */
+	if (src_ipv4 == 0)
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, 0xffffffff);
+	else
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, input_masks->src_ip_mask);
+
+	if (dst_ipv4 == 0)
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, 0xffffffff);
+	else
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, input_masks->dst_ip_mask);
+
+	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
+	case IXGBE_ATR_L4TYPE_TCP:
+		if (src_port == 0)
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, 0xffff);
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
+			                input_masks->src_port_mask);
+
+		if (dst_port == 0)
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
+			               (IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
+			                (0xffff << 16)));
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
+			               (IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
+			                (input_masks->dst_port_mask << 16)));
+		break;
+	case IXGBE_ATR_L4TYPE_UDP:
+		if (src_port == 0)
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, 0xffff);
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
+			                input_masks->src_port_mask);
+
+		if (dst_port == 0)
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
+			               (IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
+			                (0xffff << 16)));
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
+			               (IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
+			                (input_masks->src_port_mask << 16)));
+		break;
+	default:
+		/* this already would have failed above */
+		break;
+	}
+
+	/* Program the last mask register, FDIRM */
+	if (input_masks->vlan_id_mask || !vlan_id)
+		/* Mask both VLAN and VLANP - bits 0 and 1 */
+		fdirm |= 0x3;
+
+	if (input_masks->data_mask || !flex_bytes)
+		/* Flex bytes need masking, so mask the whole thing - bit 4 */
+		fdirm |= 0x10;
+
+	/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
+	fdirm |= 0x24;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
 
 	fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
 	fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 07a9410c08d4..0d234346a4ea 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -979,6 +979,9 @@ static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
 		return IXGBE_TEST_LEN;
 	case ETH_SS_STATS:
 		return IXGBE_STATS_LEN;
+	case ETH_SS_NTUPLE_FILTERS:
+		return (ETHTOOL_MAX_NTUPLE_LIST_ENTRY *
+		        ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -2150,23 +2153,124 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	bool need_reset = false;
 
 	ethtool_op_set_flags(netdev, data);
 
-	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
-		return 0;
-
 	/* if state changes we need to update adapter->flags and reset */
 	if ((!!(data & ETH_FLAG_LRO)) != 
 	    (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
 		adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
+		need_reset = true;
+	}
+
+	/*
+	 * Check if Flow Director n-tuple support was enabled or disabled.  If
+	 * the state changed, we need to reset.
+	 */
+	if ((adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) &&
+	    (!(data & ETH_FLAG_NTUPLE))) {
+		/* turn off Flow Director perfect, set hash and reset */
+		adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		need_reset = true;
+	} else if ((!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) &&
+	           (data & ETH_FLAG_NTUPLE)) {
+		/* turn off Flow Director hash, enable perfect and reset */
+		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+		need_reset = true;
+	} else {
+		/* no state change */
+	}
+
+	if (need_reset) {
 		if (netif_running(netdev))
 			ixgbe_reinit_locked(adapter);
 		else
 			ixgbe_reset(adapter);
 	}
+
 	return 0;
+}
+
+static int ixgbe_set_rx_ntuple(struct net_device *dev,
+                               struct ethtool_rx_ntuple *cmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ethtool_rx_ntuple_flow_spec fs = cmd->fs;
+	struct ixgbe_atr_input input_struct;
+	struct ixgbe_atr_input_masks input_masks;
+	int target_queue;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+		return -EOPNOTSUPP;
+
+	/*
+	 * Don't allow programming if the action is a queue greater than
+	 * the number of online Tx queues.
+	 */
+	if ((fs.action >= adapter->num_tx_queues) ||
+	    (fs.action < ETHTOOL_RXNTUPLE_ACTION_DROP))
+		return -EINVAL;
+
+	memset(&input_struct, 0, sizeof(struct ixgbe_atr_input));
+	memset(&input_masks, 0, sizeof(struct ixgbe_atr_input_masks));
+
+	input_masks.src_ip_mask = fs.m_u.tcp_ip4_spec.ip4src;
+	input_masks.dst_ip_mask = fs.m_u.tcp_ip4_spec.ip4dst;
+	input_masks.src_port_mask = fs.m_u.tcp_ip4_spec.psrc;
+	input_masks.dst_port_mask = fs.m_u.tcp_ip4_spec.pdst;
+	input_masks.vlan_id_mask = fs.vlan_tag_mask;
+	/* only use the lowest 2 bytes for flex bytes */
+	input_masks.data_mask = (fs.data_mask & 0xffff);
+
+	switch (fs.flow_type) {
+	case TCP_V4_FLOW:
+		ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_TCP);
+		break;
+	case UDP_V4_FLOW:
+		ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_UDP);
+		break;
+	case SCTP_V4_FLOW:
+		ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_SCTP);
+		break;
+	default:
+		return -1;
+	}
 
+	/* Mask bits from the inputs based on user-supplied mask */
+	ixgbe_atr_set_src_ipv4_82599(&input_struct,
+	            (fs.h_u.tcp_ip4_spec.ip4src & ~fs.m_u.tcp_ip4_spec.ip4src));
+	ixgbe_atr_set_dst_ipv4_82599(&input_struct,
+	            (fs.h_u.tcp_ip4_spec.ip4dst & ~fs.m_u.tcp_ip4_spec.ip4dst));
+	/* 82599 expects these to be byte-swapped for perfect filtering */
+	ixgbe_atr_set_src_port_82599(&input_struct,
+	       ((ntohs(fs.h_u.tcp_ip4_spec.psrc)) & ~fs.m_u.tcp_ip4_spec.psrc));
+	ixgbe_atr_set_dst_port_82599(&input_struct,
+	       ((ntohs(fs.h_u.tcp_ip4_spec.pdst)) & ~fs.m_u.tcp_ip4_spec.pdst));
+
+	/* VLAN and Flex bytes are either completely masked or not */
+	if (!fs.vlan_tag_mask)
+		ixgbe_atr_set_vlan_id_82599(&input_struct, fs.vlan_tag);
+
+	if (!input_masks.data_mask)
+		/* make sure we only use the first 2 bytes of user data */
+		ixgbe_atr_set_flex_byte_82599(&input_struct,
+		                              (fs.data & 0xffff));
+
+	/* determine if we need to drop or route the packet */
+	if (fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP)
+		target_queue = MAX_RX_QUEUES - 1;
+	else
+		target_queue = fs.action;
+
+	spin_lock(&adapter->fdir_perfect_lock);
+	ixgbe_fdir_add_perfect_filter_82599(&adapter->hw, &input_struct,
+	                                    &input_masks, 0, target_queue);
+	spin_unlock(&adapter->fdir_perfect_lock);
+
+	return 0;
 }
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {
@@ -2204,6 +2308,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_coalesce           = ixgbe_set_coalesce,
 	.get_flags              = ethtool_op_get_flags,
 	.set_flags              = ixgbe_set_flags,
+	.set_rx_ntuple          = ixgbe_set_rx_ntuple,
 };
 
 void ixgbe_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2a3c8315e357..f04b5396e057 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3253,6 +3253,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	netif_carrier_off(netdev);
 
+	/* clear n-tuple filters that are cached */
+	ethtool_ntuple_flush(netdev);
+
 	if (!pci_channel_offline(adapter->pdev))
 		ixgbe_reset(adapter);
 	ixgbe_clean_all_tx_rings(adapter);
@@ -4187,6 +4190,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
+	struct net_device *dev = adapter->netdev;
 	unsigned int rss;
 #ifdef CONFIG_IXGBE_DCB
 	int j;
@@ -4214,10 +4218,18 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
 		adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
 		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
-		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		if (dev->features & NETIF_F_NTUPLE) {
+			/* Flow Director perfect filter enabled */
+			adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+			adapter->atr_sample_rate = 0;
+			spin_lock_init(&adapter->fdir_perfect_lock);
+		} else {
+			/* Flow Director hash filters enabled */
+			adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+			adapter->atr_sample_rate = 20;
+		}
 		adapter->ring_feature[RING_F_FDIR].indices =
 		                                         IXGBE_MAX_FDIR_INDICES;
-		adapter->atr_sample_rate = 20;
 		adapter->fdir_pballoc = 0;
 #ifdef IXGBE_FCOE
 		adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 0db67c19b2c4..2be907466593 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2129,6 +2129,15 @@ struct ixgbe_atr_input {
 	u8 byte_stream[42];
 };
 
+struct ixgbe_atr_input_masks {
+	u32 src_ip_mask;
+	u32 dst_ip_mask;
+	u16 src_port_mask;
+	u16 dst_port_mask;
+	u16 vlan_id_mask;
+	u16 data_mask;
+};
+
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
 	ixgbe_eeprom_spi,
-- 
cgit v1.2.3


From 92eb879ff59c5995bf18f76eb0a00cb7db758e42 Mon Sep 17 00:00:00 2001
From: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Date: Wed, 10 Feb 2010 16:08:13 +0000
Subject: ixgbe: Bump driver version up

Driver has gone under significant changes, the version should
reflect that.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index f04b5396e057..382bf8945d11 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -51,7 +51,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
                               "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.44-k2"
+#define DRV_VERSION "2.0.62-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
 
-- 
cgit v1.2.3


From dff010ac8e57e43669518a14c0e945dfeb80c2a7 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Tue, 2 Feb 2010 16:58:34 -0800
Subject: iwlwifi: clear all tx queues when firmware ready

Reset and clear all the tx queues when finished downloading runtime
uCode and ready to go into operation mode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c | 2 ++
 drivers/net/wireless/iwlwifi/iwl-5000.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index aebe8c51d3e1..e4794885d079 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -581,6 +581,8 @@ static int iwl4965_alive_notify(struct iwl_priv *priv)
 
 	iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
 
+	/* reset to 0 to enable all the queue first */
+	priv->txq_ctx_active_msk = 0;
 	/* Map each Tx/cmd queue to its corresponding fifo */
 	for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
 		int ac = default_queue_to_tx_fifo[i];
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index f3d662c8cbcf..a7fa1ad7e6e5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -648,6 +648,8 @@ int iwl5000_alive_notify(struct iwl_priv *priv)
 
 	iwl5000_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
 
+	/* reset to 0 to enable all the queue first */
+	priv->txq_ctx_active_msk = 0;
 	/* map qos queues to fifos one-to-one */
 	for (i = 0; i < ARRAY_SIZE(iwl5000_default_queue_to_tx_fifo); i++) {
 		int ac = iwl5000_default_queue_to_tx_fifo[i];
-- 
cgit v1.2.3


From a93e7973d0983d22fcbe5f691244736211639fe7 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 3 Feb 2010 11:47:19 -0800
Subject: iwlwifi: multiple force reset mode

Provide the function to perform different type of uCode reset/reload operation.
When uCode detect error and can not fix itself, this iwl_force_reset()
function allow driver to perform the necessary reset/reload functions and help
to bring uCode back to normal operation state.

Currently only 2 type of force reset are available:
 - reset radio
 - reload firmware

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c | 44 +++++++++++++++++++++++++++++++--
 drivers/net/wireless/iwlwifi/iwl-core.h |  2 +-
 drivers/net/wireless/iwlwifi/iwl-dev.h  |  9 ++++++-
 drivers/net/wireless/iwlwifi/iwl-rx.c   |  2 +-
 drivers/net/wireless/iwlwifi/iwl-scan.c | 10 --------
 5 files changed, 52 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index d390eef2efe5..500ced452098 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -3334,7 +3334,7 @@ int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display)
 }
 EXPORT_SYMBOL(iwl_dump_fh);
 
-void iwl_force_rf_reset(struct iwl_priv *priv)
+static void iwl_force_rf_reset(struct iwl_priv *priv)
 {
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
@@ -3356,7 +3356,47 @@ void iwl_force_rf_reset(struct iwl_priv *priv)
 	iwl_internal_short_hw_scan(priv);
 	return;
 }
-EXPORT_SYMBOL(iwl_force_rf_reset);
+
+#define IWL_DELAY_NEXT_FORCE_RESET (HZ*3)
+
+int iwl_force_reset(struct iwl_priv *priv, int mode)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return -EINVAL;
+
+	if (priv->last_force_reset_jiffies &&
+	    time_after(priv->last_force_reset_jiffies +
+		       IWL_DELAY_NEXT_FORCE_RESET, jiffies)) {
+		IWL_DEBUG_INFO(priv, "force reset rejected\n");
+		return -EAGAIN;
+	}
+
+	IWL_DEBUG_INFO(priv, "perform force reset (%d)\n", mode);
+
+	switch (mode) {
+	case IWL_RF_RESET:
+		iwl_force_rf_reset(priv);
+		break;
+	case IWL_FW_RESET:
+		IWL_ERR(priv, "On demand firmware reload\n");
+		/* Set the FW error flag -- cleared on iwl_down */
+		set_bit(STATUS_FW_ERROR, &priv->status);
+		wake_up_interruptible(&priv->wait_command_queue);
+		/*
+		 * Keep the restart process from trying to send host
+		 * commands by clearing the INIT status bit
+		 */
+		clear_bit(STATUS_READY, &priv->status);
+		queue_work(priv->workqueue, &priv->restart);
+		break;
+	default:
+		IWL_DEBUG_INFO(priv, "invalid reset request.\n");
+		return -EINVAL;
+	}
+	priv->last_force_reset_jiffies = jiffies;
+
+	return 0;
+}
 
 #ifdef CONFIG_PM
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 8f0c564e68b0..df558796fbe6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -501,7 +501,7 @@ int iwl_scan_cancel(struct iwl_priv *priv);
 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
 int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
 int iwl_internal_short_hw_scan(struct iwl_priv *priv);
-void iwl_force_rf_reset(struct iwl_priv *priv);
+int iwl_force_reset(struct iwl_priv *priv, int mode);
 u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 		       const u8 *ie, int ie_len, int left);
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 55dc5a866542..9f1d302e3a34 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1035,6 +1035,11 @@ struct iwl_event_log {
 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF	(100)
 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX	(255)
 
+enum iwl_reset {
+	IWL_RF_RESET = 0,
+	IWL_FW_RESET,
+};
+
 struct iwl_priv {
 
 	/* ieee device used by generic ieee processing code */
@@ -1066,6 +1071,9 @@ struct iwl_priv {
 	/* storing the jiffies when the plcp error rate is received */
 	unsigned long plcp_jiffies;
 
+	/* force reset */
+	unsigned long last_force_reset_jiffies;
+
 	/* we allocate array of iwl4965_channel_info for NIC's valid channels.
 	 *    Access via channel # using indirect index array */
 	struct iwl_channel_info *channel_info;	/* channel info array */
@@ -1087,7 +1095,6 @@ struct iwl_priv {
 	unsigned long scan_start;
 	unsigned long scan_pass_start;
 	unsigned long scan_start_tsf;
-	unsigned long last_internal_scan_jiffies;
 	void *scan;
 	int scan_bands;
 	struct cfg80211_scan_request *scan_request;
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 5df66382d922..909d9c9b9ad8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -689,7 +689,7 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 			 * Reset the RF radio due to the high plcp
 			 * error rate
 			 */
-			iwl_force_rf_reset(priv);
+			iwl_force_reset(priv, IWL_RF_RESET);
 		}
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index f786a407638f..501477464e07 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -250,8 +250,6 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 
 	if (!priv->is_internal_short_scan)
 		priv->next_scan_jiffies = 0;
-	else
-		priv->last_internal_scan_jiffies = jiffies;
 
 	IWL_DEBUG_INFO(priv, "Setting scan to off\n");
 
@@ -551,8 +549,6 @@ EXPORT_SYMBOL(iwl_mac_hw_scan);
  * internal short scan, this function should only been called while associated.
  * It will reset and tune the radio to prevent possible RF related problem
  */
-#define IWL_DELAY_NEXT_INTERNAL_SCAN (HZ*1)
-
 int iwl_internal_short_hw_scan(struct iwl_priv *priv)
 {
 	int ret = 0;
@@ -572,12 +568,6 @@ int iwl_internal_short_hw_scan(struct iwl_priv *priv)
 		ret = -EAGAIN;
 		goto out;
 	}
-	if (priv->last_internal_scan_jiffies &&
-	    time_after(priv->last_internal_scan_jiffies +
-		       IWL_DELAY_NEXT_INTERNAL_SCAN, jiffies)) {
-		IWL_DEBUG_SCAN(priv, "internal scan rejected\n");
-		goto out;
-	}
 
 	priv->scan_bands = 0;
 	if (priv->band == IEEE80211_BAND_5GHZ)
-- 
cgit v1.2.3


From 04cafd7fa74d5f70efc93bef36f118177057ff74 Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 3 Feb 2010 11:47:20 -0800
Subject: iwlwifi: add debug function to reset/reload radio/firmware

Adding function to force reset radio or reload firmware from debugfs.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index d134301b553c..78298be0bdb6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2223,6 +2223,32 @@ static ssize_t iwl_dbgfs_plcp_delta_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_force_reset_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int reset, ret;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &reset) != 1)
+		return -EINVAL;
+	switch (reset) {
+	case IWL_RF_RESET:
+	case IWL_FW_RESET:
+		ret = iwl_force_reset(priv, reset);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return ret ? ret : count;
+}
+
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -2243,6 +2269,7 @@ DEBUGFS_READ_FILE_OPS(fh_reg);
 DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon);
 DEBUGFS_WRITE_FILE_OPS(internal_scan);
 DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta);
+DEBUGFS_WRITE_FILE_OPS(force_reset);
 
 /*
  * Create the debugfs files and directories
@@ -2296,6 +2323,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(missed_beacon, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(internal_scan, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(plcp_delta, dir_debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(force_reset, dir_debug, S_IWUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, dir_debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR);
-- 
cgit v1.2.3


From 45d427001b5eec03cecaacddb53c73af46bb263e Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 3 Feb 2010 12:24:44 -0800
Subject: iwlwifi: check for aggregation frame and queue

Error checking for aggregation frames should go into aggregation queue,
if aggregation queue not available, use legacy queue instead.
Also make sure the aggregation queue is available to activate,
if driver and mac80211 is out-of-sync, try to disable the queue and
sync-up with mac80211.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 15 ++++++++++++++-
 drivers/net/wireless/iwlwifi/iwl-tx.c     | 18 ++++++++++++------
 2 files changed, 26 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 6aebcedaca8d..8bf7c20b9d39 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -298,10 +298,23 @@ static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
 				      struct iwl_lq_sta *lq_data, u8 tid,
 				      struct ieee80211_sta *sta)
 {
+	int ret;
+
 	if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
 		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
 				sta->addr, tid);
-		ieee80211_start_tx_ba_session(sta, tid);
+		ret = ieee80211_start_tx_ba_session(sta, tid);
+		if (ret == -EAGAIN) {
+			/*
+			 * driver and mac80211 is out of sync
+			 * this might be cause by reloading firmware
+			 * stop the tx ba session here
+			 */
+			IWL_DEBUG_HT(priv, "Fail start Tx agg on tid: %d\n",
+				tid);
+			ret = ieee80211_stop_tx_ba_session(sta, tid,
+						WLAN_BACK_INITIATOR);
+		}
 	}
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index d365d13e3291..3788a3d4ddc2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -806,8 +806,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		hdr->seq_ctrl |= cpu_to_le16(seq_number);
 		seq_number += 0x10;
 		/* aggregation is on for this <sta,tid> */
-		if (info->flags & IEEE80211_TX_CTL_AMPDU)
+		if (info->flags & IEEE80211_TX_CTL_AMPDU &&
+		    priv->stations[sta_id].tid[tid].agg.state == IWL_AGG_ON) {
 			txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
+		}
 	}
 
 	txq = &priv->txq[txq_id];
@@ -1328,7 +1330,7 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
 {
 	int tx_fifo_id, txq_id, sta_id, ssn = -1;
 	struct iwl_tid_data *tid_data;
-	int ret, write_ptr, read_ptr;
+	int write_ptr, read_ptr;
 	unsigned long flags;
 
 	if (!ra) {
@@ -1380,13 +1382,17 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
 	priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn,
+	/*
+	 * the only reason this call can fail is queue number out of range,
+	 * which can happen if uCode is reloaded and all the station
+	 * information are lost. if it is outside the range, there is no need
+	 * to deactivate the uCode queue, just return "success" to allow
+	 *  mac80211 to clean up it own data.
+	 */
+	priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn,
 						   tx_fifo_id);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (ret)
-		return ret;
-
 	ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid);
 
 	return 0;
-- 
cgit v1.2.3


From a24dd27c47fcb31ba5c906b66e5cbc28bfa3fa5e Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Wed, 3 Feb 2010 12:51:07 -0800
Subject: iwlwifi: remove unused op-code in PHY Calibration command

Number of calibration op-code are not used by driver, remove those from
iwl-commands.h

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index c2f31eb26bef..ab3c77b92cc8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -3470,11 +3470,7 @@ enum {
 	IWL_PHY_CALIBRATE_DIFF_GAIN_CMD		= 7,
 	IWL_PHY_CALIBRATE_DC_CMD		= 8,
 	IWL_PHY_CALIBRATE_LO_CMD		= 9,
-	IWL_PHY_CALIBRATE_RX_BB_CMD		= 10,
 	IWL_PHY_CALIBRATE_TX_IQ_CMD		= 11,
-	IWL_PHY_CALIBRATE_RX_IQ_CMD		= 12,
-	IWL_PHY_CALIBRATION_NOISE_CMD		= 13,
-	IWL_PHY_CALIBRATE_AGC_TABLE_CMD		= 14,
 	IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD	= 15,
 	IWL_PHY_CALIBRATE_BASE_BAND_CMD		= 16,
 	IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD	= 17,
-- 
cgit v1.2.3


From 7bfedc59ee350727b115bbc79780c69b114f162d Mon Sep 17 00:00:00 2001
From: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Date: Wed, 3 Feb 2010 13:47:56 -0800
Subject: iwlwifi: cleanup return values

Cleanup return values and removes unnecessary code.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.h     |  6 +++---
 drivers/net/wireless/iwlwifi/iwl-rx.c       | 11 +++--------
 drivers/net/wireless/iwlwifi/iwl-tx.c       | 21 +++++++--------------
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 16 ++++------------
 4 files changed, 17 insertions(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index df558796fbe6..530fae8cf16d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -414,13 +414,13 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 void iwl_cmd_queue_free(struct iwl_priv *priv);
 int iwl_rx_queue_alloc(struct iwl_priv *priv);
 void iwl_rx_handle(struct iwl_priv *priv);
-int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
+void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
 				  struct iwl_rx_queue *q);
 void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 void iwl_rx_replenish(struct iwl_priv *priv);
 void iwl_rx_replenish_now(struct iwl_priv *priv);
 int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
-int iwl_rx_queue_restock(struct iwl_priv *priv);
+void iwl_rx_queue_restock(struct iwl_priv *priv);
 int iwl_rx_queue_space(const struct iwl_rx_queue *q);
 void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority);
 void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
@@ -450,7 +450,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb);
 void iwl_hw_txq_ctx_free(struct iwl_priv *priv);
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 			 struct iwl_tx_queue *txq);
-int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
+void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
 int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 		      int slots_num, u32 txq_id);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 909d9c9b9ad8..428c9d689d4c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -123,12 +123,11 @@ EXPORT_SYMBOL(iwl_rx_queue_space);
 /**
  * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
  */
-int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
+void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
 {
 	unsigned long flags;
 	u32 rx_wrt_ptr_reg = priv->hw_params.rx_wrt_ptr_reg;
 	u32 reg;
-	int ret = 0;
 
 	spin_lock_irqsave(&q->lock, flags);
 
@@ -161,7 +160,6 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
 
  exit_unlock:
 	spin_unlock_irqrestore(&q->lock, flags);
-	return ret;
 }
 EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr);
 /**
@@ -184,14 +182,13 @@ static inline __le32 iwl_dma_addr2rbd_ptr(struct iwl_priv *priv,
  * also updates the memory address in the firmware to reference the new
  * target buffer.
  */
-int iwl_rx_queue_restock(struct iwl_priv *priv)
+void iwl_rx_queue_restock(struct iwl_priv *priv)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
 	unsigned long flags;
 	int write;
-	int ret = 0;
 
 	spin_lock_irqsave(&rxq->lock, flags);
 	write = rxq->write & ~0x7;
@@ -220,10 +217,8 @@ int iwl_rx_queue_restock(struct iwl_priv *priv)
 		spin_lock_irqsave(&rxq->lock, flags);
 		rxq->need_update = 1;
 		spin_unlock_irqrestore(&rxq->lock, flags);
-		ret = iwl_rx_queue_update_write_ptr(priv, rxq);
+		iwl_rx_queue_update_write_ptr(priv, rxq);
 	}
-
-	return ret;
 }
 EXPORT_SYMBOL(iwl_rx_queue_restock);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 3788a3d4ddc2..2199b1bc1c28 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -80,14 +80,13 @@ static inline void iwl_free_dma_ptr(struct iwl_priv *priv,
 /**
  * iwl_txq_update_write_ptr - Send new write index to hardware
  */
-int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
+void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 {
 	u32 reg = 0;
-	int ret = 0;
 	int txq_id = txq->q.id;
 
 	if (txq->need_update == 0)
-		return ret;
+		return;
 
 	/* if we're trying to save power */
 	if (test_bit(STATUS_POWER_PMI, &priv->status)) {
@@ -101,7 +100,7 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 				      txq_id, reg);
 			iwl_set_bit(priv, CSR_GP_CNTRL,
 				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-			return ret;
+			return;
 		}
 
 		iwl_write_direct32(priv, HBUS_TARG_WRPTR,
@@ -114,8 +113,6 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 			    txq->q.write_ptr | (txq_id << 8));
 
 	txq->need_update = 0;
-
-	return ret;
 }
 EXPORT_SYMBOL(iwl_txq_update_write_ptr);
 
@@ -731,7 +728,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	u8 tid = 0;
 	u8 *qc = NULL;
 	unsigned long flags;
-	int ret;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (iwl_is_rfkill(priv)) {
@@ -951,7 +947,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
-	ret = iwl_txq_update_write_ptr(priv, txq);
+	iwl_txq_update_write_ptr(priv, txq);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/*
@@ -965,9 +961,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (sta_priv && sta_priv->client)
 		atomic_inc(&sta_priv->pending_frames);
 
-	if (ret)
-		return ret;
-
 	if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) {
 		if (wait_write_ptr) {
 			spin_lock_irqsave(&priv->lock, flags);
@@ -1006,7 +999,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	struct iwl_cmd_meta *out_meta;
 	dma_addr_t phys_addr;
 	unsigned long flags;
-	int len, ret;
+	int len;
 	u32 idx;
 	u16 fix_size;
 
@@ -1103,10 +1096,10 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 
 	/* Increment and update queue's write index */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
-	ret = iwl_txq_update_write_ptr(priv, txq);
+	iwl_txq_update_write_ptr(priv, txq);
 
 	spin_unlock_irqrestore(&priv->hcmd_lock, flags);
-	return ret ? ret : idx;
+	return idx;
 }
 
 static void iwl_tx_status(struct iwl_priv *priv, struct sk_buff *skb)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index eac2b9a95711..f6e8f45ff7f0 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -478,7 +478,6 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	u8 wait_write_ptr = 0;
 	u8 *qc = NULL;
 	unsigned long flags;
-	int rc;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (iwl_is_rfkill(priv)) {
@@ -663,12 +662,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
-	rc = iwl_txq_update_write_ptr(priv, txq);
+	iwl_txq_update_write_ptr(priv, txq);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (rc)
-		return rc;
-
 	if ((iwl_queue_space(q) < q->high_mark)
 	    && priv->mac80211_registered) {
 		if (wait_write_ptr) {
@@ -1063,13 +1059,13 @@ static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv,
  * also updates the memory address in the firmware to reference the new
  * target buffer.
  */
-static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
+static void iwl3945_rx_queue_restock(struct iwl_priv *priv)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
 	unsigned long flags;
-	int write, rc;
+	int write;
 
 	spin_lock_irqsave(&rxq->lock, flags);
 	write = rxq->write & ~0x7;
@@ -1099,12 +1095,8 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
 		spin_lock_irqsave(&rxq->lock, flags);
 		rxq->need_update = 1;
 		spin_unlock_irqrestore(&rxq->lock, flags);
-		rc = iwl_rx_queue_update_write_ptr(priv, rxq);
-		if (rc)
-			return rc;
+		iwl_rx_queue_update_write_ptr(priv, rxq);
 	}
-
-	return 0;
 }
 
 /**
-- 
cgit v1.2.3


From bbcbb9ef9735c67da303d30bd6beb9e699f0f508 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Tue, 2 Feb 2010 10:57:12 -0800
Subject: iwlwifi: fix scan race

There is a problem if an "internal short scan" is in progress when a
mac80211 requested scan arrives. If this new scan request arrives within
the "next_scan_jiffies" period then driver will immediately return success
and complete the scan. The problem here is that the scan has not been
fully initialized at this time (is_internal_short_scan is still set to true
because of the currently running scan), which results in the scan
completion never to be sent to mac80211. At this time also, evan though the
internal short scan is still running the state (is_internal_short_scan)
will be set to false, so when the internal scan does complete then mac80211
will receive a scan completion.

Fix this by checking right away if a scan is in progress when a scan
request arrives from mac80211.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-scan.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 501477464e07..dd9ff2ed645a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -469,21 +469,6 @@ EXPORT_SYMBOL(iwl_init_scan_params);
 
 static int iwl_scan_initiate(struct iwl_priv *priv)
 {
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_SCAN(priv, "Aborting scan due to not ready.\n");
-		return -EIO;
-	}
-
-	if (test_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
-		return -EAGAIN;
-	}
-
-	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
-		return -EAGAIN;
-	}
-
 	IWL_DEBUG_INFO(priv, "Starting scan...\n");
 	set_bit(STATUS_SCANNING, &priv->status);
 	priv->is_internal_short_scan = false;
@@ -515,6 +500,18 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 		goto out_unlock;
 	}
 
+	if (test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
+		ret = -EAGAIN;
+		goto out_unlock;
+	}
+
+	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
+		ret = -EAGAIN;
+		goto out_unlock;
+	}
+
 	/* We don't schedule scan within next_scan_jiffies period.
 	 * Avoid scanning during possible EAPOL exchange, return
 	 * success immediately.
-- 
cgit v1.2.3


From 4843b5a731b31916d100cfc5ba4d03ae78462ed9 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Wed, 3 Feb 2010 09:38:59 -0800
Subject: iwlwifi: reset card during probe

To ensure that card is in a sane state during probe we add a reset call.
This change was prompted by users of kdump who was not able to bring up the
wireless driver in the kdump kernel. The problem here was that the primary
kernel, which is not running at the time, left the wireless card up and
running. When the kdump kernel starts it is thus possible to immediately
receive interrupts from firmware after registering interrupt, but without
being ready to deal with interrupts from firmware yet.

Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 8 ++++++++
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 7 +++++++
 2 files changed, 15 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c1eff4c5b448..31b156d58d7f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3540,6 +3540,14 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	spin_lock_init(&priv->reg_lock);
 	spin_lock_init(&priv->lock);
+
+	/*
+	 * stop and reset the on-board processor just in case it is in a
+	 * strange state ... like being left stranded by a primary kernel
+	 * and this is now the kdump kernel trying to start up
+	 */
+	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
 	iwl_hw_detect(priv);
 	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n",
 		priv->cfg->name, priv->hw_rev);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index f6e8f45ff7f0..7af8ab80dcf1 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4039,6 +4039,13 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	spin_lock_init(&priv->reg_lock);
 	spin_lock_init(&priv->lock);
 
+	/*
+	 * stop and reset the on-board processor just in case it is in a
+	 * strange state ... like being left stranded by a primary kernel
+	 * and this is now the kdump kernel trying to start up
+	 */
+	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
 	/***********************
 	 * 4. Read EEPROM
 	 * ********************/
-- 
cgit v1.2.3


From 6c3872e1d52290dcd506473028867cacc6b7393d Mon Sep 17 00:00:00 2001
From: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com>
Date: Mon, 8 Feb 2010 13:53:05 -0800
Subject: iwlwifi: Adjusting PLCP error threshold for 1000 NIC

While testing the station with the NIC 1000 family, it is found that
the plcp error can easily exceed 50 value in 100mSecs.  This creates
unneccessary radio reset/tuning.  This patch raises the PLCP error
threshold of the NIC 1000 from 50 to 200 error count.

Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-1000.c | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-dev.h  | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 694ceef88590..3bf2e6e9b2d9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -246,7 +246,7 @@ struct iwl_cfg iwl1000_bgn_cfg = {
 	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
-	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
 };
 
@@ -274,7 +274,7 @@ struct iwl_cfg iwl1000_bg_cfg = {
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.support_ct_kill_exit = true,
-	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 9f1d302e3a34..71cf1558e640 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1033,6 +1033,7 @@ struct iwl_event_log {
 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN	(0)
 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF	(50)
 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF	(100)
+#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF	(200)
 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX	(255)
 
 enum iwl_reset {
-- 
cgit v1.2.3


From f36d04abe684f9e2b07c6ebe9f77ae20eb5c1e84 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 10 Feb 2010 05:07:45 -0800
Subject: iwlwifi: use dma_alloc_coherent

Change pci_alloc_consistent() to dma_alloc_coherent() so we can use
GFP_KERNEL flag.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c     |  8 +++-----
 drivers/net/wireless/iwlwifi/iwl-core.c     | 12 ++++++------
 drivers/net/wireless/iwlwifi/iwl-helpers.h  |  7 ++++---
 drivers/net/wireless/iwlwifi/iwl-rx.c       | 21 +++++++++++----------
 drivers/net/wireless/iwlwifi/iwl-tx.c       | 23 ++++++++++++-----------
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 16 ++++++++--------
 6 files changed, 44 insertions(+), 43 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 57194bbd2762..5913418872ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2470,11 +2470,9 @@ int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
 	memset((void *)&priv->hw_params, 0,
 	       sizeof(struct iwl_hw_params));
 
-	priv->shared_virt =
-	    pci_alloc_consistent(priv->pci_dev,
-				 sizeof(struct iwl3945_shared),
-				 &priv->shared_phys);
-
+	priv->shared_virt = dma_alloc_coherent(&priv->pci_dev->dev,
+					       sizeof(struct iwl3945_shared),
+					       &priv->shared_phys, GFP_KERNEL);
 	if (!priv->shared_virt) {
 		IWL_ERR(priv, "failed to allocate pci memory\n");
 		mutex_unlock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 500ced452098..bd56827b8fef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1670,9 +1670,9 @@ EXPORT_SYMBOL(iwl_set_tx_power);
 void iwl_free_isr_ict(struct iwl_priv *priv)
 {
 	if (priv->ict_tbl_vir) {
-		pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) +
-					PAGE_SIZE, priv->ict_tbl_vir,
-					priv->ict_tbl_dma);
+		dma_free_coherent(&priv->pci_dev->dev,
+				  (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+				  priv->ict_tbl_vir, priv->ict_tbl_dma);
 		priv->ict_tbl_vir = NULL;
 	}
 }
@@ -1688,9 +1688,9 @@ int iwl_alloc_isr_ict(struct iwl_priv *priv)
 	if (priv->cfg->use_isr_legacy)
 		return 0;
 	/* allocate shrared data table */
-	priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) *
-						  ICT_COUNT) + PAGE_SIZE,
-						  &priv->ict_tbl_dma);
+	priv->ict_tbl_vir = dma_alloc_coherent(&priv->pci_dev->dev,
+					(sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+					&priv->ict_tbl_dma, GFP_KERNEL);
 	if (!priv->ict_tbl_vir)
 		return -ENOMEM;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index 45af5bbc1c56..51a67fb2e185 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -80,8 +80,8 @@ static inline void iwl_free_fw_desc(struct pci_dev *pci_dev,
 				    struct fw_desc *desc)
 {
 	if (desc->v_addr)
-		pci_free_consistent(pci_dev, desc->len,
-				    desc->v_addr, desc->p_addr);
+		dma_free_coherent(&pci_dev->dev, desc->len,
+				  desc->v_addr, desc->p_addr);
 	desc->v_addr = NULL;
 	desc->len = 0;
 }
@@ -89,7 +89,8 @@ static inline void iwl_free_fw_desc(struct pci_dev *pci_dev,
 static inline int iwl_alloc_fw_desc(struct pci_dev *pci_dev,
 				    struct fw_desc *desc)
 {
-	desc->v_addr = pci_alloc_consistent(pci_dev, desc->len, &desc->p_addr);
+	desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len,
+					  &desc->p_addr, GFP_KERNEL);
 	return (desc->v_addr != NULL) ? 0 : -ENOMEM;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 428c9d689d4c..aba8f4c20c1b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -345,10 +345,10 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 		}
 	}
 
-	pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
-			    rxq->dma_addr);
-	pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
-			    rxq->rb_stts, rxq->rb_stts_dma);
+	dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			  rxq->dma_addr);
+	dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
+			  rxq->rb_stts, rxq->rb_stts_dma);
 	rxq->bd = NULL;
 	rxq->rb_stts  = NULL;
 }
@@ -357,7 +357,7 @@ EXPORT_SYMBOL(iwl_rx_queue_free);
 int iwl_rx_queue_alloc(struct iwl_priv *priv)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
-	struct pci_dev *dev = priv->pci_dev;
+	struct device *dev = &priv->pci_dev->dev;
 	int i;
 
 	spin_lock_init(&rxq->lock);
@@ -365,12 +365,13 @@ int iwl_rx_queue_alloc(struct iwl_priv *priv)
 	INIT_LIST_HEAD(&rxq->rx_used);
 
 	/* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
-	rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
+	rxq->bd = dma_alloc_coherent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr,
+				     GFP_KERNEL);
 	if (!rxq->bd)
 		goto err_bd;
 
-	rxq->rb_stts = pci_alloc_consistent(dev, sizeof(struct iwl_rb_status),
-					&rxq->rb_stts_dma);
+	rxq->rb_stts = dma_alloc_coherent(dev, sizeof(struct iwl_rb_status),
+					  &rxq->rb_stts_dma, GFP_KERNEL);
 	if (!rxq->rb_stts)
 		goto err_rb;
 
@@ -387,8 +388,8 @@ int iwl_rx_queue_alloc(struct iwl_priv *priv)
 	return 0;
 
 err_rb:
-	pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
-			    rxq->dma_addr);
+	dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			  rxq->dma_addr);
 err_bd:
 	return -ENOMEM;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 2199b1bc1c28..d8c11f955e42 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -60,7 +60,8 @@ static const u16 default_tid_to_tx_fifo[] = {
 static inline int iwl_alloc_dma_ptr(struct iwl_priv *priv,
 				    struct iwl_dma_ptr *ptr, size_t size)
 {
-	ptr->addr = pci_alloc_consistent(priv->pci_dev, size, &ptr->dma);
+	ptr->addr = dma_alloc_coherent(&priv->pci_dev->dev, size, &ptr->dma,
+				       GFP_KERNEL);
 	if (!ptr->addr)
 		return -ENOMEM;
 	ptr->size = size;
@@ -73,7 +74,7 @@ static inline void iwl_free_dma_ptr(struct iwl_priv *priv,
 	if (unlikely(!ptr->addr))
 		return;
 
-	pci_free_consistent(priv->pci_dev, ptr->size, ptr->addr, ptr->dma);
+	dma_free_coherent(&priv->pci_dev->dev, ptr->size, ptr->addr, ptr->dma);
 	memset(ptr, 0, sizeof(*ptr));
 }
 
@@ -129,7 +130,7 @@ void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
 {
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
-	struct pci_dev *dev = priv->pci_dev;
+	struct device *dev = &priv->pci_dev->dev;
 	int i;
 
 	if (q->n_bd == 0)
@@ -146,8 +147,8 @@ void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
 
 	/* De-alloc circular buffer of TFDs */
 	if (txq->q.n_bd)
-		pci_free_consistent(dev, priv->hw_params.tfd_size *
-				    txq->q.n_bd, txq->tfds, txq->q.dma_addr);
+		dma_free_coherent(dev, priv->hw_params.tfd_size *
+				  txq->q.n_bd, txq->tfds, txq->q.dma_addr);
 
 	/* De-alloc array of per-TFD driver data */
 	kfree(txq->txb);
@@ -176,7 +177,7 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
 {
 	struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
 	struct iwl_queue *q = &txq->q;
-	struct pci_dev *dev = priv->pci_dev;
+	struct device *dev = &priv->pci_dev->dev;
 	int i;
 
 	if (q->n_bd == 0)
@@ -188,8 +189,8 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
 
 	/* De-alloc circular buffer of TFDs */
 	if (txq->q.n_bd)
-		pci_free_consistent(dev, priv->hw_params.tfd_size *
-				    txq->q.n_bd, txq->tfds, txq->q.dma_addr);
+		dma_free_coherent(dev, priv->hw_params.tfd_size * txq->q.n_bd,
+				  txq->tfds, txq->q.dma_addr);
 
 	/* deallocate arrays */
 	kfree(txq->cmd);
@@ -280,7 +281,7 @@ static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q,
 static int iwl_tx_queue_alloc(struct iwl_priv *priv,
 			      struct iwl_tx_queue *txq, u32 id)
 {
-	struct pci_dev *dev = priv->pci_dev;
+	struct device *dev = &priv->pci_dev->dev;
 	size_t tfd_sz = priv->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX;
 
 	/* Driver private data, only for Tx (not command) queues,
@@ -299,8 +300,8 @@ static int iwl_tx_queue_alloc(struct iwl_priv *priv,
 
 	/* Circular buffer of transmit frame descriptors (TFDs),
 	 * shared with device */
-	txq->tfds = pci_alloc_consistent(dev, tfd_sz, &txq->q.dma_addr);
-
+	txq->tfds = dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr,
+				       GFP_KERNEL);
 	if (!txq->tfds) {
 		IWL_ERR(priv, "pci_alloc_consistent(%zd) failed\n", tfd_sz);
 		goto error;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 7af8ab80dcf1..3df488a8cf75 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -352,10 +352,10 @@ static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
 static void iwl3945_unset_hw_params(struct iwl_priv *priv)
 {
 	if (priv->shared_virt)
-		pci_free_consistent(priv->pci_dev,
-				    sizeof(struct iwl3945_shared),
-				    priv->shared_virt,
-				    priv->shared_phys);
+		dma_free_coherent(&priv->pci_dev->dev,
+				  sizeof(struct iwl3945_shared),
+				  priv->shared_virt,
+				  priv->shared_phys);
 }
 
 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
@@ -1241,10 +1241,10 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx
 		}
 	}
 
-	pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
-			    rxq->dma_addr);
-	pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
-			    rxq->rb_stts, rxq->rb_stts_dma);
+	dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			  rxq->dma_addr);
+	dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
+			  rxq->rb_stts, rxq->rb_stts_dma);
 	rxq->bd = NULL;
 	rxq->rb_stts  = NULL;
 }
-- 
cgit v1.2.3


From a9e10fb9b1c6ad16e73cf2656951fce3a817611e Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Tue, 9 Feb 2010 08:14:11 -0800
Subject: iwlwifi: clear all the stop_queue flag after load firmware

All the queues are awake and ready to use after loading firmware,
for firmware reload case, if any queues was stopped before
reload, mac80211 will wake those queues after restart hardware, so make
sure all the flag used to keep track of the queue status are
reset correctly.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c | 5 +++++
 drivers/net/wireless/iwlwifi/iwl-5000.c | 5 +++++
 2 files changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index e4794885d079..17e91ad3496c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -581,6 +581,11 @@ static int iwl4965_alive_notify(struct iwl_priv *priv)
 
 	iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
 
+	/* make sure all queue are not stopped */
+	memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
+	for (i = 0; i < 4; i++)
+		atomic_set(&priv->queue_stop_count[i], 0);
+
 	/* reset to 0 to enable all the queue first */
 	priv->txq_ctx_active_msk = 0;
 	/* Map each Tx/cmd queue to its corresponding fifo */
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index a7fa1ad7e6e5..94fc83671f20 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -648,6 +648,11 @@ int iwl5000_alive_notify(struct iwl_priv *priv)
 
 	iwl5000_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
 
+	/* make sure all queue are not stopped */
+	memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
+	for (i = 0; i < 4; i++)
+		atomic_set(&priv->queue_stop_count[i], 0);
+
 	/* reset to 0 to enable all the queue first */
 	priv->txq_ctx_active_msk = 0;
 	/* map qos queues to fifos one-to-one */
-- 
cgit v1.2.3


From 1db5950f1d0b82e07371b211a48317b8972da063 Mon Sep 17 00:00:00 2001
From: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com>
Date: Wed, 10 Feb 2010 10:27:34 -0800
Subject: iwlwifi: Monitor and recover the aggregation TX flow failure

This change monitors the tx statistics to detect the drop in throughput.
When the throughput drops, the ratio of the actual_ack_count and the expected_
ack_count also drops.  At the same time, the aggregated ba_timeout (the number
of ba timeout retries) also rises.  If the actual_ack_count/expected_ack_count
ratio is 0 and the number of ba timeout retries rises to 16, no tx packets
(tcp, udp, or ping - icmp) can be delivered.  The driver recovers from this
situation by reseting the uCode firmware.  If the actual_ack_count/expected_
ack_count ratio drops below 50% (but not 0) and the aggregated ba_timeout
retries just exceed 5 (but not 16), then the driver can reset the radio to
bring the throughput up.

Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 14 ++++++++++-
 drivers/net/wireless/iwlwifi/iwl-dev.h |  3 +++
 drivers/net/wireless/iwlwifi/iwl-rx.c  | 46 ++++++++++++++++++++++++++++++++++
 3 files changed, 62 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 31b156d58d7f..4157c6c8645f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2941,10 +2941,21 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			return ret;
 	case IEEE80211_AMPDU_TX_START:
 		IWL_DEBUG_HT(priv, "start Tx\n");
-		return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
+		ret = iwl_tx_agg_start(priv, sta->addr, tid, ssn);
+		if (ret == 0) {
+			priv->agg_tids_count++;
+			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
+				priv->agg_tids_count);
+		}
+		return ret;
 	case IEEE80211_AMPDU_TX_STOP:
 		IWL_DEBUG_HT(priv, "stop Tx\n");
 		ret = iwl_tx_agg_stop(priv, sta->addr, tid);
+		if ((ret == 0) && (priv->agg_tids_count > 0)) {
+			priv->agg_tids_count--;
+			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
+				priv->agg_tids_count);
+		}
 		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 			return 0;
 		else
@@ -3364,6 +3375,7 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	priv->iw_mode = NL80211_IFTYPE_STATION;
 	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
 	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
+	priv->agg_tids_count = 0;
 
 	/* Choose which receivers/antennas to use */
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 71cf1558e640..f81317d478ee 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1072,6 +1072,9 @@ struct iwl_priv {
 	/* storing the jiffies when the plcp error rate is received */
 	unsigned long plcp_jiffies;
 
+	/* reporting the number of tids has AGG on. 0 means no AGGREGATION */
+	u8 agg_tids_count;
+
 	/* force reset */
 	unsigned long last_force_reset_jiffies;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index aba8f4c20c1b..fed554accedc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -616,6 +616,11 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
 
 #define REG_RECALIB_PERIOD (60)
 
+/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
+#define ACK_CNT_RATIO (50)
+#define BA_TIMEOUT_CNT (5)
+#define BA_TIMEOUT_MAX (16)
+
 #define PLCP_MSG "plcp_err exceeded %u, %u, %u, %u, %u, %d, %u mSecs\n"
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb)
@@ -625,6 +630,9 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 	int combined_plcp_delta;
 	unsigned int plcp_msec;
 	unsigned long plcp_received_jiffies;
+	int actual_ack_cnt_delta;
+	int expected_ack_cnt_delta;
+	int ba_timeout_delta;
 
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics),
@@ -639,6 +647,44 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 #ifdef CONFIG_IWLWIFI_DEBUG
 	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
 #endif
+	actual_ack_cnt_delta = le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
+		le32_to_cpu(priv->statistics.tx.actual_ack_cnt);
+	expected_ack_cnt_delta = le32_to_cpu(
+			pkt->u.stats.tx.expected_ack_cnt) -
+		le32_to_cpu(priv->statistics.tx.expected_ack_cnt);
+	ba_timeout_delta = le32_to_cpu(
+			pkt->u.stats.tx.agg.ba_timeout) -
+		le32_to_cpu(priv->statistics.tx.agg.ba_timeout);
+	if ((priv->agg_tids_count > 0) &&
+		(expected_ack_cnt_delta > 0) &&
+		(((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta) <
+			ACK_CNT_RATIO) &&
+		(ba_timeout_delta > BA_TIMEOUT_CNT)) {
+		IWL_DEBUG_RADIO(priv,
+			"actual_ack_cnt delta = %d, expected_ack_cnt = %d\n",
+			actual_ack_cnt_delta, expected_ack_cnt_delta);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+		IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
+			priv->delta_statistics.tx.rx_detected_cnt);
+		IWL_DEBUG_RADIO(priv,
+			"ack_or_ba_timeout_collision delta = %d\n",
+			priv->delta_statistics.tx.ack_or_ba_timeout_collision);
+#endif
+		IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
+			ba_timeout_delta);
+		if ((actual_ack_cnt_delta == 0) &&
+			(ba_timeout_delta >=
+				BA_TIMEOUT_MAX)) {
+			IWL_DEBUG_RADIO(priv,
+				"call iwl_force_reset(IWL_FW_RESET)\n");
+			iwl_force_reset(priv, IWL_FW_RESET);
+		} else {
+			IWL_DEBUG_RADIO(priv,
+				"call iwl_force_reset(IWL_RF_RESET)\n");
+			iwl_force_reset(priv, IWL_RF_RESET);
+		}
+	}
 	/*
 	 * check for plcp_err and trigger radio reset if it exceeds
 	 * the plcp error threshold plcp_delta.
-- 
cgit v1.2.3


From 42c4568a4ace0adc27a9d6f02936e2047ba6fc7e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 11 Feb 2010 18:07:19 +0100
Subject: ath9k: add a workaround for ack timeout issues

Adding support for setting the coverage class in some cases broke
association and data transfer, as it overwrote the initial ACK timeout
value from the initvals with a smaller value.
I don't know why the new value works in 5 GHz (matches the initval
there), but not in 2.4 GHz (initvals use 64us here), so until the
problem is fully understood, the value should be increased again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f15fee76a4e2..f00f5c744f48 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1217,6 +1217,17 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
 	/* As defined by IEEE 802.11-2007 17.3.8.6 */
 	slottime = ah->slottime + 3 * ah->coverage_class;
 	acktimeout = slottime + sifstime;
+
+	/*
+	 * Workaround for early ACK timeouts, add an offset to match the
+	 * initval's 64us ack timeout value.
+	 * This was initially only meant to work around an issue with delayed
+	 * BA frames in some implementations, but it has been found to fix ACK
+	 * timeout issues in other cases as well.
+	 */
+	if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
+		acktimeout += 64 - sifstime - ah->slottime;
+
 	ath9k_hw_setslottime(ah, slottime);
 	ath9k_hw_set_ack_timeout(ah, acktimeout);
 	ath9k_hw_set_cts_timeout(ah, acktimeout);
-- 
cgit v1.2.3


From fafaf31bf9f965d91462ee115e27ef6c262b74ea Mon Sep 17 00:00:00 2001
From: Shanyu Zhao <shanyu.zhao@intel.com>
Date: Thu, 11 Feb 2010 10:42:22 -0800
Subject: iwlwifi: fix AMSDU Rx after paged Rx patch

Previous patch "use paged Rx" broke AMSDU Rx functionality. If an AP
sends out A-MSDU packets the station will crash.  Fix it by linearizing
skbuff for AMSDU packet before handing it to mac80211 since mac80211
doesn't support paged skbuff.

This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2155

Reported-by: Norbert Preining <preining@logic.at>
Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-rx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 6f36b6e79f5e..2dbce85404aa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -928,7 +928,10 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
 	if (ieee80211_is_mgmt(fc) ||
 	    ieee80211_has_protected(fc) ||
 	    ieee80211_has_morefrags(fc) ||
-	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
+	    (ieee80211_is_data_qos(fc) &&
+	     *ieee80211_get_qos_ctl(hdr) &
+	     IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
 		ret = skb_linearize(skb);
 	else
 		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
-- 
cgit v1.2.3


From 4cd24eaf0c6ee7f0242e34ee77ec899f255e66b5 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Mon, 8 Feb 2010 04:30:35 +0000
Subject: net: use netdev_mc_count and netdev_mc_empty when appropriate

This patch replaces dev->mc_count in all drivers (hopefully I didn't miss
anything). Used spatch and did small tweaks and conding style changes when
it was suitable.

Jirka

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/xtensa/platforms/iss/network.c    |  2 +-
 drivers/infiniband/hw/nes/nes_nic.c    |  2 +-
 drivers/media/dvb/dvb-core/dvb_net.c   |  7 +++----
 drivers/net/3c505.c                    |  6 +++---
 drivers/net/3c509.c                    | 10 ++++++----
 drivers/net/3c523.c                    |  4 ++--
 drivers/net/3c527.c                    | 11 ++++++-----
 drivers/net/7990.c                     |  2 +-
 drivers/net/82596.c                    |  8 ++++----
 drivers/net/a2065.c                    |  2 +-
 drivers/net/acenic.c                   |  2 +-
 drivers/net/amd8111e.c                 |  7 ++++---
 drivers/net/ariadne.c                  |  2 +-
 drivers/net/arm/at91_ether.c           |  4 ++--
 drivers/net/arm/ether3.c               |  2 +-
 drivers/net/arm/ixp4xx_eth.c           |  2 +-
 drivers/net/arm/ks8695net.c            |  4 ++--
 drivers/net/at1700.c                   |  6 +++---
 drivers/net/atarilance.c               |  2 +-
 drivers/net/atp.c                      |  7 ++++---
 drivers/net/au1000_eth.c               |  4 ++--
 drivers/net/b44.c                      |  4 ++--
 drivers/net/bcm63xx_enet.c             |  4 ++--
 drivers/net/benet/be_main.c            |  5 +++--
 drivers/net/bfin_mac.c                 |  4 ++--
 drivers/net/bmac.c                     |  8 ++++----
 drivers/net/bnx2.c                     |  2 +-
 drivers/net/bnx2x_main.c               |  7 ++++---
 drivers/net/chelsio/common.h           |  4 ++--
 drivers/net/cpmac.c                    |  2 +-
 drivers/net/cris/eth_v10.c             |  2 +-
 drivers/net/davinci_emac.c             |  4 ++--
 drivers/net/de620.c                    |  2 +-
 drivers/net/declance.c                 |  2 +-
 drivers/net/defxx.c                    |  4 ++--
 drivers/net/depca.c                    |  2 +-
 drivers/net/dl2k.c                     |  6 +++---
 drivers/net/dm9000.c                   |  2 +-
 drivers/net/e100.c                     |  6 +++---
 drivers/net/eepro.c                    | 15 ++++++++-------
 drivers/net/eexpress.c                 |  6 +++---
 drivers/net/ehea/ehea_main.c           |  6 +++---
 drivers/net/enc28j60.c                 |  2 +-
 drivers/net/enic/enic_main.c           |  4 ++--
 drivers/net/epic100.c                  |  6 +++---
 drivers/net/eth16i.c                   |  2 +-
 drivers/net/ewrk3.c                    |  2 +-
 drivers/net/fealnx.c                   |  4 ++--
 drivers/net/fec.c                      |  2 +-
 drivers/net/fec_mpc52xx.c              |  2 +-
 drivers/net/fs_enet/mac-fcc.c          |  2 +-
 drivers/net/fs_enet/mac-fec.c          |  2 +-
 drivers/net/fs_enet/mac-scc.c          |  2 +-
 drivers/net/gianfar.c                  |  2 +-
 drivers/net/hamachi.c                  |  6 +++---
 drivers/net/hp100.c                    |  7 ++++---
 drivers/net/ibm_newemac/core.c         |  6 +++---
 drivers/net/ibmveth.c                  |  5 +++--
 drivers/net/igb/igb_main.c             |  8 ++++----
 drivers/net/igbvf/netdev.c             |  6 +++---
 drivers/net/ioc3-eth.c                 |  5 +++--
 drivers/net/ipg.c                      |  4 ++--
 drivers/net/isa-skeleton.c             |  5 +++--
 drivers/net/iseries_veth.c             |  4 ++--
 drivers/net/ixgb/ixgb_main.c           |  6 +++---
 drivers/net/ixgbe/ixgbe_main.c         |  2 +-
 drivers/net/ixgbevf/ixgbevf_main.c     |  2 +-
 drivers/net/jme.c                      |  2 +-
 drivers/net/korina.c                   |  6 +++---
 drivers/net/ks8851.c                   |  4 ++--
 drivers/net/ks8851_mll.c               |  4 ++--
 drivers/net/lance.c                    |  2 +-
 drivers/net/lib82596.c                 |  6 +++---
 drivers/net/ll_temac_main.c            |  6 +++---
 drivers/net/lp486e.c                   | 12 +++++++-----
 drivers/net/macb.c                     |  4 ++--
 drivers/net/mace.c                     |  2 +-
 drivers/net/macmace.c                  |  2 +-
 drivers/net/natsemi.c                  |  4 ++--
 drivers/net/netxen/netxen_nic_hw.c     | 10 +++++-----
 drivers/net/ni52.c                     |  2 +-
 drivers/net/ni65.c                     |  2 +-
 drivers/net/niu.c                      |  4 ++--
 drivers/net/ns83820.c                  |  2 +-
 drivers/net/octeon/octeon_mgmt.c       |  6 +++---
 drivers/net/pci-skeleton.c             |  4 ++--
 drivers/net/pcmcia/3c574_cs.c          |  2 +-
 drivers/net/pcmcia/3c589_cs.c          |  2 +-
 drivers/net/pcmcia/fmvj18x_cs.c        |  6 +++---
 drivers/net/pcmcia/nmclan_cs.c         | 14 +++++++-------
 drivers/net/pcmcia/smc91c92_cs.c       |  4 ++--
 drivers/net/pcmcia/xirc2ps_cs.c        |  8 ++++----
 drivers/net/pcnet32.c                  |  2 +-
 drivers/net/ps3_gelic_net.c            |  2 +-
 drivers/net/qlcnic/qlcnic_hw.c         |  4 ++--
 drivers/net/qlge/qlge_main.c           |  4 ++--
 drivers/net/r6040.c                    | 11 ++++++-----
 drivers/net/r8169.c                    |  4 ++--
 drivers/net/s2io.c                     |  8 ++++----
 drivers/net/sc92031.c                  |  2 +-
 drivers/net/sfc/efx.c                  |  2 +-
 drivers/net/sgiseeq.c                  |  2 +-
 drivers/net/sis190.c                   |  4 ++--
 drivers/net/sis900.c                   |  4 ++--
 drivers/net/skfp/skfddi.c              |  6 +++---
 drivers/net/skge.c                     |  6 +++---
 drivers/net/sky2.c                     |  4 ++--
 drivers/net/smc911x.c                  |  6 +++---
 drivers/net/smc9194.c                  |  4 ++--
 drivers/net/smc91x.c                   |  6 +++---
 drivers/net/smsc911x.c                 |  4 ++--
 drivers/net/smsc9420.c                 |  2 +-
 drivers/net/sonic.c                    |  8 +++++---
 drivers/net/starfire.c                 |  8 ++++----
 drivers/net/stmmac/dwmac100.c          |  6 +++---
 drivers/net/stmmac/dwmac1000_core.c    |  8 ++++----
 drivers/net/sun3_82586.c               |  2 +-
 drivers/net/sun3lance.c                |  2 +-
 drivers/net/sunbmac.c                  |  4 ++--
 drivers/net/sundance.c                 |  6 +++---
 drivers/net/sungem.c                   |  4 ++--
 drivers/net/sunhme.c                   |  8 ++++----
 drivers/net/sunlance.c                 |  2 +-
 drivers/net/sunqe.c                    |  4 ++--
 drivers/net/tc35815.c                  |  6 +++---
 drivers/net/tehuti.c                   |  4 ++--
 drivers/net/tg3.c                      |  4 ++--
 drivers/net/tlan.c                     |  2 +-
 drivers/net/tokenring/3c359.c          |  2 +-
 drivers/net/tokenring/ibmtr.c          |  2 +-
 drivers/net/tokenring/lanstreamer.c    |  2 +-
 drivers/net/tokenring/olympic.c        |  2 +-
 drivers/net/tokenring/tms380tr.c       |  2 +-
 drivers/net/tsi108_eth.c               |  2 +-
 drivers/net/tulip/de2104x.c            |  8 ++++----
 drivers/net/tulip/de4x5.c              |  6 +++---
 drivers/net/tulip/dmfe.c               | 15 ++++++++-------
 drivers/net/tulip/tulip_core.c         | 18 +++++++++++-------
 drivers/net/tulip/uli526x.c            | 12 +++++++-----
 drivers/net/tulip/winbond-840.c        |  7 ++++---
 drivers/net/typhoon.c                  |  9 +++++----
 drivers/net/ucc_geth.c                 |  3 ++-
 drivers/net/usb/asix.c                 | 12 ++++++------
 drivers/net/usb/catc.c                 |  4 +++-
 drivers/net/usb/int51x1.c              |  2 +-
 drivers/net/usb/kaweth.c               |  2 +-
 drivers/net/usb/mcs7830.c              |  6 +++---
 drivers/net/usb/pegasus.c              |  2 +-
 drivers/net/usb/rtl8150.c              |  2 +-
 drivers/net/usb/smsc95xx.c             |  4 ++--
 drivers/net/via-rhine.c                |  5 +++--
 drivers/net/via-velocity.c             |  6 ++++--
 drivers/net/virtio_net.c               | 13 ++++++++-----
 drivers/net/vmxnet3/vmxnet3_drv.c      |  8 ++++----
 drivers/net/vxge/vxge-main.c           |  6 +++---
 drivers/net/wireless/airo.c            |  2 +-
 drivers/net/wireless/orinoco/main.c    |  4 ++--
 drivers/net/wireless/ray_cs.c          |  2 +-
 drivers/net/wireless/rndis_wlan.c      |  6 +++---
 drivers/net/wireless/zd1201.c          |  7 +++----
 drivers/net/yellowfin.c                |  7 ++++---
 drivers/staging/et131x/et131x_netdev.c | 10 +++++-----
 drivers/staging/netwave/netwave_cs.c   |  8 ++++----
 drivers/staging/slicoss/slicoss.c      |  2 +-
 drivers/staging/vt6655/device_main.c   |  4 ++--
 drivers/staging/vt6656/main_usb.c      |  5 +++--
 drivers/staging/wavelan/wavelan.c      |  8 ++++----
 drivers/staging/wavelan/wavelan_cs.c   | 11 ++++++-----
 drivers/staging/wlags49_h2/wl_netdev.c | 12 ++++++------
 net/bluetooth/bnep/netdev.c            |  6 ++++--
 net/core/dev.c                         |  2 +-
 net/irda/irlan/irlan_eth.c             |  5 +++--
 net/mac80211/iface.c                   |  2 +-
 173 files changed, 440 insertions(+), 401 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index 2f0b86b37cf9..87e218f98ef4 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -560,7 +560,7 @@ static void iss_net_set_multicast_list(struct net_device *dev)
 #if 0
 	if (dev->flags & IFF_PROMISC)
 		return;
-	else if (dev->mc_count)
+	else if (!netdev_mc_empty(dev))
 		dev->flags |= IFF_ALLMULTI;
 	else
 		dev->flags &= ~IFF_ALLMULTI;
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index ab1102780186..c04f8fc6fc2d 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -862,7 +862,7 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev)
 	}
 
 	nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscous = %d, All Multicast = %d.\n",
-		  netdev->mc_count, !!(netdev->flags & IFF_PROMISC),
+		  netdev_mc_count(netdev), !!(netdev->flags & IFF_PROMISC),
 		  !!(netdev->flags & IFF_ALLMULTI));
 	if (!mc_all_on) {
 		multicast_addr = netdev->mc_list;
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index da6552d32cfe..37d8579fc7a9 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -1138,18 +1138,18 @@ static void wq_set_multicast_list (struct work_struct *work)
 	} else if ((dev->flags & IFF_ALLMULTI)) {
 		dprintk("%s: allmulti mode\n", dev->name);
 		priv->rx_mode = RX_MODE_ALL_MULTI;
-	} else if (dev->mc_count) {
+	} else if (!netdev_mc_empty(dev)) {
 		int mci;
 		struct dev_mc_list *mc;
 
 		dprintk("%s: set_mc_list, %d entries\n",
-			dev->name, dev->mc_count);
+			dev->name, netdev_mc_count(dev));
 
 		priv->rx_mode = RX_MODE_MULTI;
 		priv->multi_num = 0;
 
 		for (mci = 0, mc=dev->mc_list;
-		     mci < dev->mc_count;
+		     mci < netdev_mc_count(dev);
 		     mc = mc->next, mci++) {
 			dvb_set_mc_filter(dev, mc);
 		}
@@ -1236,7 +1236,6 @@ static void dvb_net_setup(struct net_device *dev)
 	dev->header_ops		= &dvb_header_ops;
 	dev->netdev_ops		= &dvb_netdev_ops;
 	dev->mtu		= 4096;
-	dev->mc_count           = 0;
 
 	dev->flags |= IFF_NOARP;
 }
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index 9257d7ce0378..dadb46a8833a 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -1229,8 +1229,8 @@ static void elp_set_mc_list(struct net_device *dev)
 		/* send a "load multicast list" command to the board, max 10 addrs/cmd */
 		/* if num_addrs==0 the list will be cleared */
 		adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST;
-		adapter->tx_pcb.length = 6 * dev->mc_count;
-		for (i = 0; i < dev->mc_count; i++) {
+		adapter->tx_pcb.length = 6 * netdev_mc_count(dev);
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			memcpy(adapter->tx_pcb.data.multicast[i], dmi->dmi_addr, 6);
 			dmi = dmi->next;
 		}
@@ -1244,7 +1244,7 @@ static void elp_set_mc_list(struct net_device *dev)
 				TIMEOUT_MSG(__LINE__);
 			}
 		}
-		if (dev->mc_count)
+		if (!netdev_mc_empty(dev))
 			adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI;
 		else		/* num_addrs == 0 */
 			adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 9d85efce5916..902435a76466 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -1111,12 +1111,14 @@ set_multicast_list(struct net_device *dev)
 	unsigned long flags;
 	struct el3_private *lp = netdev_priv(dev);
 	int ioaddr = dev->base_addr;
+	int mc_count = netdev_mc_count(dev);
 
 	if (el3_debug > 1) {
 		static int old;
-		if (old != dev->mc_count) {
-			old = dev->mc_count;
-			pr_debug("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
+		if (old != mc_count) {
+			old = mc_count;
+			pr_debug("%s: Setting Rx mode to %d addresses.\n",
+				 dev->name, mc_count);
 		}
 	}
 	spin_lock_irqsave(&lp->lock, flags);
@@ -1124,7 +1126,7 @@ set_multicast_list(struct net_device *dev)
 		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
 			 ioaddr + EL3_CMD);
 	}
-	else if (dev->mc_count || (dev->flags&IFF_ALLMULTI)) {
+	else if (mc_count || (dev->flags&IFF_ALLMULTI)) {
 		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD);
 	}
 	else
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 27d80ca5e4c0..6948d667fc5e 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -626,7 +626,7 @@ static int init586(struct net_device *dev)
 	volatile struct tdr_cmd_struct *tdr_cmd;
 	volatile struct mcsetup_cmd_struct *mc_cmd;
 	struct dev_mc_list *dmi = dev->mc_list;
-	int num_addrs = dev->mc_count;
+	int num_addrs = netdev_mc_count(dev);
 
 	ptr = (void *) ((char *) p->scb + sizeof(struct scb_struct));
 
@@ -771,7 +771,7 @@ static int init586(struct net_device *dev)
 	 * Multicast setup
 	 */
 
-	if (dev->mc_count) {
+	if (num_addrs) {
 		/* I don't understand this: do we really need memory after the init? */
 		int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
 		if (len <= 0) {
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 36c4191e7bca..ce9826980517 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -1526,10 +1526,10 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 
 	if ((dev->flags&IFF_PROMISC) ||
 	    (dev->flags&IFF_ALLMULTI) ||
-	    dev->mc_count > 10)
+	    netdev_mc_count(dev) > 10)
 		/* Enable promiscuous mode */
 		filt |= 1;
-	else if(dev->mc_count)
+	else if (!netdev_mc_empty(dev))
 	{
 		unsigned char block[62];
 		unsigned char *bp;
@@ -1542,16 +1542,17 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 		if(!lp->mc_list_valid)
 		{
 			block[1]=0;
-			block[0]=dev->mc_count;
+			block[0]=netdev_mc_count(dev);
 			bp=block+2;
 
-			for(i=0;i<dev->mc_count;i++)
+			for(i=0;i<netdev_mc_count(dev);i++)
 			{
 				memcpy(bp, dmc->dmi_addr, 6);
 				bp+=6;
 				dmc=dmc->next;
 			}
-			if(mc32_command_nowait(dev, 2, block, 2+6*dev->mc_count)==-1)
+			if(mc32_command_nowait(dev, 2, block,
+					       2+6*netdev_mc_count(dev))==-1)
 			{
 				lp->mc_reload_wait = 1;
 				return;
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index b1e5764628c6..079d0be37821 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -611,7 +611,7 @@ static void lance_load_multicast (struct net_device *dev)
         ib->filter [1] = 0;
 
         /* Add addresses */
-        for (i = 0; i < dev->mc_count; i++){
+        for (i = 0; i < netdev_mc_count(dev); i++){
                 addrs = dmi->dmi_addr;
                 dmi   = dmi->next;
 
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 1663bc9e45de..638ce3b29854 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -1505,7 +1505,7 @@ static void set_multicast_list(struct net_device *dev)
 	int config = 0, cnt;
 
 	DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
-		dev->name, dev->mc_count,
+		dev->name, netdev_mc_count(dev),
 		dev->flags & IFF_PROMISC  ? "ON" : "OFF",
 		dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
 
@@ -1533,7 +1533,7 @@ static void set_multicast_list(struct net_device *dev)
 		i596_add_cmd(dev, &lp->cf_cmd.cmd);
 	}
 
-	cnt = dev->mc_count;
+	cnt = netdev_mc_count(dev);
 	if (cnt > MAX_MC_CNT)
 	{
 		cnt = MAX_MC_CNT;
@@ -1541,7 +1541,7 @@ static void set_multicast_list(struct net_device *dev)
 			dev->name, cnt);
 	}
 
-	if (dev->mc_count > 0) {
+	if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *dmi;
 		unsigned char *cp;
 		struct mc_cmd *cmd;
@@ -1550,7 +1550,7 @@ static void set_multicast_list(struct net_device *dev)
 			return;
 		cmd = &lp->mc_cmd;
 		cmd->cmd.command = CmdMulticastList;
-		cmd->mc_cnt = dev->mc_count * 6;
+		cmd->mc_cnt = netdev_mc_count(dev) * 6;
 		cp = cmd->mc_addrs;
 		for (dmi = dev->mc_list; cnt && dmi != NULL; dmi = dmi->next, cnt--, cp += 6) {
 			memcpy(cp, dmi->dmi_addr, 6);
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index b7ec0368d7e8..6a65f660c192 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -619,7 +619,7 @@ static void lance_load_multicast (struct net_device *dev)
 	ib->filter [1] = 0;
 
 	/* Add addresses */
-	for (i = 0; i < dev->mc_count; i++){
+	for (i = 0; i < netdev_mc_count(dev); i++){
 		addrs = dmi->dmi_addr;
 		dmi   = dmi->next;
 
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index ec624ab03e88..4ae750ef1e10 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -2845,7 +2845,7 @@ static void ace_set_multicast_list(struct net_device *dev)
 	 * set the entire multicast list at a time and keeping track of
 	 * it here is going to be messy.
 	 */
-	if ((dev->mc_count) && !(ap->mcast_all)) {
+	if (!netdev_mc_empty(dev) && !ap->mcast_all) {
 		cmd.evt = C_SET_MULTICAST_MODE;
 		cmd.code = C_C_MCAST_ENABLE;
 		cmd.idx = 0;
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index bb27b27d9672..bdffdfb4c88b 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1387,7 +1387,8 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 	}
 	else
 		writel( PROM, lp->mmio + CMD2);
-	if(dev->flags & IFF_ALLMULTI || dev->mc_count > MAX_FILTER_SIZE){
+	if (dev->flags & IFF_ALLMULTI ||
+	    netdev_mc_count(dev) > MAX_FILTER_SIZE) {
 		/* get all multicast packet */
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
 		lp->mc_list = dev->mc_list;
@@ -1395,7 +1396,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 		amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
 		return;
 	}
-	if( dev->mc_count == 0 ){
+	if (netdev_mc_empty(dev)) {
 		/* get only own packets */
 		mc_filter[1] = mc_filter[0] = 0;
 		lp->mc_list = NULL;
@@ -1409,7 +1410,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 	lp->options |= OPTION_MULTICAST_ENABLE;
 	lp->mc_list = dev->mc_list;
 	mc_filter[1] = mc_filter[0] = 0;
-	for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
+	for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < netdev_mc_count(dev);
 		     i++, mc_ptr = mc_ptr->next) {
 		bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
 		mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c
index e2c202493fa7..08d8be47dae0 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ariadne.c
@@ -819,7 +819,7 @@ static void set_multicast_list(struct net_device *dev)
 	lance->RDP = PROM;		/* Set promiscuous mode */
     } else {
 	short multicast_table[4];
-	int num_addrs = dev->mc_count;
+	int num_addrs = netdev_mc_count(dev);
 	int i;
 	/* We don't use the multicast table, but rely on upper-layer filtering. */
 	memset(multicast_table, (num_addrs == 0) ? 0 : -1,
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index c8bc60a7040c..17d85d98987d 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -563,7 +563,7 @@ static void at91ether_sethashtable(struct net_device *dev)
 	mc_filter[0] = mc_filter[1] = 0;
 
 	curr = dev->mc_list;
-	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
+	for (i = 0; i < netdev_mc_count(dev); i++, curr = curr->next) {
 		if (!curr) break;	/* unexpected end of list */
 
 		bitnr = hash_get_index(curr->dmi_addr);
@@ -592,7 +592,7 @@ static void at91ether_set_multicast_list(struct net_device *dev)
 		at91_emac_write(AT91_EMAC_HSH, -1);
 		at91_emac_write(AT91_EMAC_HSL, -1);
 		cfg |= AT91_EMAC_MTI;
-	} else if (dev->mc_count > 0) {			/* Enable specific multicasts */
+	} else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */
 		at91ether_sethashtable(dev);
 		cfg |= AT91_EMAC_MTI;
 	} else if (dev->flags & (~IFF_ALLMULTI)) {	/* Disable all multicast mode */
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 1f7a69c929a6..d9de9bce2395 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -463,7 +463,7 @@ static void ether3_setmulticastlist(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {
 		/* promiscuous mode */
 		priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
-	} else if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
+	} else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
 		priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
 	} else
 		priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index c3dfbdd2cdcf..1a5f78b160f9 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -737,7 +737,7 @@ static void eth_set_mcast_list(struct net_device *dev)
 	struct port *port = netdev_priv(dev);
 	struct dev_mc_list *mclist = dev->mc_list;
 	u8 diffs[ETH_ALEN], *addr;
-	int cnt = dev->mc_count, i;
+	int cnt = netdev_mc_count(dev), i;
 
 	if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
 		__raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index be256b34cea8..1dc181a9fbc3 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -1207,7 +1207,7 @@ ks8695_set_multicast(struct net_device *ndev)
 	if (ndev->flags & IFF_ALLMULTI) {
 		/* enable all multicast mode */
 		ctrl |= DRXC_RM;
-	} else if (ndev->mc_count > KS8695_NR_ADDRESSES) {
+	} else if (netdev_mc_count(ndev) > KS8695_NR_ADDRESSES) {
 		/* more specific multicast addresses than can be
 		 * handled in hardware
 		 */
@@ -1216,7 +1216,7 @@ ks8695_set_multicast(struct net_device *ndev)
 		/* enable specific multicasts */
 		ctrl &= ~DRXC_RM;
 		ks8695_init_partial_multicast(ksp, ndev->mc_list,
-					      ndev->mc_count);
+					      netdev_mc_count(ndev));
 	}
 
 	ks8695_writereg(ksp, KS8695_DRXC, ctrl);
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index b14f4799d5d1..fe60cd02c86c 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -839,12 +839,12 @@ set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
-	} else if (dev->mc_count > MC_FILTERBREAK ||
+	} else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
 			   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
-	} else if (dev->mc_count == 0) {
+	} else if (netdev_mc_empty(dev)) {
 		memset(mc_filter, 0x00, sizeof(mc_filter));
 		outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
 	} else {
@@ -852,7 +852,7 @@ set_rx_mode(struct net_device *dev)
 		int i;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next) {
 			unsigned int bit =
 				ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index cc9ed8643910..280cfff48b49 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -1097,7 +1097,7 @@ static void set_multicast_list( struct net_device *dev )
 		REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
 	} else {
 		short multicast_table[4];
-		int num_addrs = dev->mc_count;
+		int num_addrs = netdev_mc_count(dev);
 		int i;
 		/* We don't use the multicast table, but rely on upper-layer
 		 * filtering. */
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 2f8261c9614a..a841feb5df20 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -861,7 +861,7 @@ static void set_rx_mode_8002(struct net_device *dev)
 	struct net_local *lp = netdev_priv(dev);
 	long ioaddr = dev->base_addr;
 
-	if (dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC)))
+	if (!netdev_mc_empty(dev) || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC)))
 		lp->addr_mode = CMR2h_PROMISC;
 	else
 		lp->addr_mode = CMR2h_Normal;
@@ -877,7 +877,8 @@ static void set_rx_mode_8012(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		new_mode = CMR2h_PROMISC;
-	} else if ((dev->mc_count > 1000)  ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((netdev_mc_count(dev) > 1000) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		new_mode = CMR2h_Normal;
@@ -885,7 +886,7 @@ static void set_rx_mode_8012(struct net_device *dev)
 		struct dev_mc_list *mclist;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next)
 		{
 			int filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 6bac04603a88..9337d023919c 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1013,7 +1013,7 @@ static void au1000_multicast_list(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		aup->mac->control |= MAC_PROMISCUOUS;
 	} else if ((dev->flags & IFF_ALLMULTI)  ||
-			   dev->mc_count > MULTICAST_FILTER_LIMIT) {
+			   netdev_mc_count(dev) > MULTICAST_FILTER_LIMIT) {
 		aup->mac->control |= MAC_PASS_ALL_MULTI;
 		aup->mac->control &= ~MAC_PROMISCUOUS;
 		printk(KERN_INFO "%s: Pass all multicast\n", dev->name);
@@ -1023,7 +1023,7 @@ static void au1000_multicast_list(struct net_device *dev)
 		u32 mc_filter[2];	/* Multicast hash filter */
 
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next) {
 			set_bit(ether_crc(ETH_ALEN, mclist->dmi_addr)>>26,
 					(long *)mc_filter);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 44b66be38134..9091c6574b1c 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1691,7 +1691,7 @@ static int __b44_load_mcast(struct b44 *bp, struct net_device *dev)
 	struct dev_mc_list *mclist;
 	int i, num_ents;
 
-	num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE);
+	num_ents = min_t(int, netdev_mc_count(dev), B44_MCAST_TABLE_SIZE);
 	mclist = dev->mc_list;
 	for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) {
 		__b44_cam_write(bp, mclist->dmi_addr, i + 1);
@@ -1716,7 +1716,7 @@ static void __b44_set_rx_mode(struct net_device *dev)
 		__b44_set_mac_addr(bp);
 
 		if ((dev->flags & IFF_ALLMULTI) ||
-		    (dev->mc_count > B44_MCAST_TABLE_SIZE))
+		    (netdev_mc_count(dev) > B44_MCAST_TABLE_SIZE))
 			val |= RXCONFIG_ALLMULTI;
 		else
 			i = __b44_load_mcast(bp, dev);
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index 0bd47d32ec42..0927ffa0d753 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -619,7 +619,7 @@ static void bcm_enet_set_multicast_list(struct net_device *dev)
 
 	/* only 3 perfect match registers left, first one is used for
 	 * own mac address */
-	if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 3)
+	if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > 3)
 		val |= ENET_RXCFG_ALLMCAST_MASK;
 	else
 		val &= ~ENET_RXCFG_ALLMCAST_MASK;
@@ -632,7 +632,7 @@ static void bcm_enet_set_multicast_list(struct net_device *dev)
 	}
 
 	for (i = 0, mc_list = dev->mc_list;
-	     (mc_list != NULL) && (i < dev->mc_count) && (i < 3);
+	     (mc_list != NULL) && (i < netdev_mc_count(dev)) && (i < 3);
 	     i++, mc_list = mc_list->next) {
 		u8 *dmi_addr;
 		u32 tmp;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 626b76c0ebc7..0014a4e86446 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -565,14 +565,15 @@ static void be_set_multicast_list(struct net_device *netdev)
 	}
 
 	/* Enable multicast promisc if num configured exceeds what we support */
-	if (netdev->flags & IFF_ALLMULTI || netdev->mc_count > BE_MAX_MC) {
+	if (netdev->flags & IFF_ALLMULTI ||
+	    netdev_mc_count(netdev) > BE_MAX_MC) {
 		be_cmd_multicast_set(adapter, adapter->if_handle, NULL, 0,
 				&adapter->mc_cmd_mem);
 		goto done;
 	}
 
 	be_cmd_multicast_set(adapter, adapter->if_handle, netdev->mc_list,
-		netdev->mc_count, &adapter->mc_cmd_mem);
+		netdev_mc_count(netdev), &adapter->mc_cmd_mem);
 done:
 	return;
 }
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 0b23bc4f56c6..ef7f77113e26 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -819,7 +819,7 @@ static void bfin_mac_multicast_hash(struct net_device *dev)
 
 	emac_hashhi = emac_hashlo = 0;
 
-	for (i = 0; i < dev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(dev); i++) {
 		addrs = dmi->dmi_addr;
 		dmi = dmi->next;
 
@@ -862,7 +862,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= PAM;
 		bfin_write_EMAC_OPMODE(sysctl);
-	} else if (dev->mc_count) {
+	} else if (!netdev_mc_empty(dev)) {
 		/* set up multicast hash table */
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= HM;
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 9b587c344194..189fa69c2094 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -973,7 +973,7 @@ static void bmac_set_multicast(struct net_device *dev)
 {
 	struct dev_mc_list *dmi;
 	struct bmac_data *bp = netdev_priv(dev);
-	int num_addrs = dev->mc_count;
+	int num_addrs = netdev_mc_count(dev);
 	unsigned short rx_cfg;
 	int i;
 
@@ -982,7 +982,7 @@ static void bmac_set_multicast(struct net_device *dev)
 
 	XXDEBUG(("bmac: enter bmac_set_multicast, n_addrs=%d\n", num_addrs));
 
-	if((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+	if((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 64)) {
 		for (i=0; i<4; i++) bp->hash_table_mask[i] = 0xffff;
 		bmac_update_hash_table_mask(dev, bp);
 		rx_cfg = bmac_rx_on(dev, 1, 0);
@@ -1021,7 +1021,7 @@ static void bmac_set_multicast(struct net_device *dev)
 	unsigned short rx_cfg;
 	u32 crc;
 
-	if((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+	if((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 64)) {
 		bmwrite(dev, BHASH0, 0xffff);
 		bmwrite(dev, BHASH1, 0xffff);
 		bmwrite(dev, BHASH2, 0xffff);
@@ -1039,7 +1039,7 @@ static void bmac_set_multicast(struct net_device *dev)
 
 		for(i = 0; i < 4; i++) hash_table[i] = 0;
 
-		for(i = 0; i < dev->mc_count; i++) {
+		for(i = 0; i < netdev_mc_count(dev); i++) {
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5917b941aca2..c7f5515ddaa4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3560,7 +3560,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 
 		memset(mc_filter, 0, 4 * NUM_MC_HASH_REGISTERS);
 
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 
 			crc = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ffc7381969ae..6d8559052ee6 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -11471,7 +11471,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 		rx_mode = BNX2X_RX_MODE_PROMISC;
 
 	else if ((dev->flags & IFF_ALLMULTI) ||
-		 ((dev->mc_count > BNX2X_MAX_MULTICAST) && CHIP_IS_E1(bp)))
+		 ((netdev_mc_count(dev) > BNX2X_MAX_MULTICAST) &&
+		  CHIP_IS_E1(bp)))
 		rx_mode = BNX2X_RX_MODE_ALLMULTI;
 
 	else { /* some multicasts */
@@ -11482,7 +11483,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 						bnx2x_sp(bp, mcast_config);
 
 			for (i = 0, mclist = dev->mc_list;
-			     mclist && (i < dev->mc_count);
+			     mclist && (i < netdev_mc_count(dev));
 			     i++, mclist = mclist->next) {
 
 				config->config_table[i].
@@ -11554,7 +11555,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 			memset(mc_filter, 0, 4 * MC_HASH_SIZE);
 
 			for (i = 0, mclist = dev->mc_list;
-			     mclist && (i < dev->mc_count);
+			     mclist && (i < netdev_mc_count(dev));
 			     i++, mclist = mclist->next) {
 
 				DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n",
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index f6462b54f823..bb159d9603bf 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -97,13 +97,13 @@ struct t1_rx_mode {
 
 #define t1_rx_mode_promisc(rm)	(rm->dev->flags & IFF_PROMISC)
 #define t1_rx_mode_allmulti(rm)	(rm->dev->flags & IFF_ALLMULTI)
-#define t1_rx_mode_mc_cnt(rm)	(rm->dev->mc_count)
+#define t1_rx_mode_mc_cnt(rm)	(netdev_mc_count(rm->dev))
 
 static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
 {
 	u8 *addr = NULL;
 
-	if (rm->idx++ < rm->dev->mc_count) {
+	if (rm->idx++ < t1_rx_mode_mc_cnt(rm)) {
 		addr = rm->list->dmi_addr;
 		rm->list = rm->list->next;
 	}
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 8d0be26f94e3..c9c537be4ab9 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -340,7 +340,7 @@ static void cpmac_set_multicast_list(struct net_device *dev)
 			 * cpmac uses some strange mac address hashing
 			 * (not crc32)
 			 */
-			for (i = 0, iter = dev->mc_list; i < dev->mc_count;
+			for (i = 0, iter = dev->mc_list; i < netdev_mc_count(dev);
 			     i++, iter = iter->next) {
 				bit = 0;
 				tmp = iter->dmi_addr[0];
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index a24be34a3f7a..c9309eadebc1 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -1564,7 +1564,7 @@ static void
 set_multicast_list(struct net_device *dev)
 {
 	struct net_local *lp = netdev_priv(dev);
-	int num_addr = dev->mc_count;
+	int num_addr = netdev_mc_count(dev);
 	unsigned long int lo_bits;
 	unsigned long int hi_bits;
 
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index faffad409985..d1e03b5984c0 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -956,11 +956,11 @@ static void emac_dev_mcast_set(struct net_device *ndev)
 	} else {
 		mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
 		if ((ndev->flags & IFF_ALLMULTI) ||
-		    (ndev->mc_count > EMAC_DEF_MAX_MULTICAST_ADDRESSES)) {
+		    netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) {
 			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
 			emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
 		}
-		if (ndev->mc_count > 0) {
+		if (!netdev_mc_empty(ndev)) {
 			struct dev_mc_list *mc_ptr;
 			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
 			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index 45794f6cb0f6..a0a6830b5e6d 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -464,7 +464,7 @@ static int de620_close(struct net_device *dev)
 
 static void de620_set_multicast_list(struct net_device *dev)
 {
-	if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
+	if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{ /* Enable promiscuous mode */
 		de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
 	}
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index be9590253aa1..76e0de6a4263 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -960,7 +960,7 @@ static void lance_load_multicast(struct net_device *dev)
 	*lib_ptr(ib, filter[3], lp->type) = 0;
 
 	/* Add addresses */
-	for (i = 0; i < dev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(dev); i++) {
 		addrs = dmi->dmi_addr;
 		dmi = dmi->next;
 
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 98da085445e6..5adb1e03956d 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -2227,7 +2227,7 @@ static void dfx_ctl_set_multicast_list(struct net_device *dev)
 		 *		 perfect filtering will be used.
 		 */
 
-		if (dev->mc_count > (PI_CMD_ADDR_FILTER_K_SIZE - bp->uc_count))
+		if (netdev_mc_count(dev) > (PI_CMD_ADDR_FILTER_K_SIZE - bp->uc_count))
 			{
 			bp->group_prom	= PI_FSTATE_K_PASS;		/* Enable LLC group prom mode */
 			bp->mc_count	= 0;					/* Don't add mc addrs to CAM */
@@ -2235,7 +2235,7 @@ static void dfx_ctl_set_multicast_list(struct net_device *dev)
 		else
 			{
 			bp->group_prom	= PI_FSTATE_K_BLOCK;	/* Disable LLC group prom mode */
-			bp->mc_count	= dev->mc_count;		/* Add mc addrs to CAM */
+			bp->mc_count	= netdev_mc_count(dev);		/* Add mc addrs to CAM */
 			}
 
 		/* Copy addresses to multicast address table, then update adapter CAM */
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 0c1f491d20bf..314bc96689f4 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -1287,7 +1287,7 @@ static void SetMulticastFilter(struct net_device *dev)
 			lp->init_block.mcast_table[i] = 0;
 		}
 		/* Add multicast addresses */
-		for (i = 0; i < dev->mc_count; i++) {	/* for each address in the list */
+		for (i = 0; i < netdev_mc_count(dev); i++) {	/* for each address in the list */
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 			if ((*addrs & 0x01) == 1) {	/* multicast address? */
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 2a8b6a7c0b87..dea40953ed1b 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -1128,17 +1128,17 @@ set_multicast (struct net_device *dev)
 		/* Receive all frames promiscuously. */
 		rx_mode = ReceiveAllFrames;
 	} else if ((dev->flags & IFF_ALLMULTI) ||
-			(dev->mc_count > multicast_filter_limit)) {
+			(netdev_mc_count(dev) > multicast_filter_limit)) {
 		/* Receive broadcast and multicast frames */
 		rx_mode = ReceiveBroadcast | ReceiveMulticast | ReceiveUnicast;
-	} else if (dev->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev)) {
 		int i;
 		struct dev_mc_list *mclist;
 		/* Receive broadcast frames and multicast frames filtering
 		   by Hashtable */
 		rx_mode =
 		    ReceiveBroadcast | ReceiveMulticastHash | ReceiveUnicast;
-		for (i=0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i=0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 				i++, mclist=mclist->next)
 		{
 			int bit, index = 0;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b37730065688..da0985a7a87a 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -725,7 +725,7 @@ dm9000_hash_table(struct net_device *dev)
 {
 	board_info_t *db = netdev_priv(dev);
 	struct dev_mc_list *mcptr = dev->mc_list;
-	int mc_cnt = dev->mc_count;
+	int mc_cnt = netdev_mc_count(dev);
 	int i, oft;
 	u32 hash_val;
 	u16 hash_table[4];
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 5c7a155e849a..e8c0e823a06f 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1538,7 +1538,7 @@ static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct net_device *netdev = nic->netdev;
 	struct dev_mc_list *list = netdev->mc_list;
-	u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
+	u16 i, count = min(netdev_mc_count(netdev), E100_MAX_MULTICAST_ADDRS);
 
 	cb->command = cpu_to_le16(cb_multi);
 	cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
@@ -1552,7 +1552,7 @@ static void e100_set_multicast_list(struct net_device *netdev)
 	struct nic *nic = netdev_priv(netdev);
 
 	DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
-		netdev->mc_count, netdev->flags);
+		netdev_mc_count(netdev), netdev->flags);
 
 	if (netdev->flags & IFF_PROMISC)
 		nic->flags |= promiscuous;
@@ -1560,7 +1560,7 @@ static void e100_set_multicast_list(struct net_device *netdev)
 		nic->flags &= ~promiscuous;
 
 	if (netdev->flags & IFF_ALLMULTI ||
-		netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
+		netdev_mc_count(netdev) > E100_MAX_MULTICAST_ADDRS)
 		nic->flags |= multicast_all;
 	else
 		nic->flags &= ~multicast_all;
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 94c59498cdb6..488bc13cc7e6 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1288,8 +1288,9 @@ set_multicast_list(struct net_device *dev)
 	short ioaddr = dev->base_addr;
 	unsigned short mode;
 	struct dev_mc_list *dmi=dev->mc_list;
+	int mc_count = mc_count;
 
-	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63)
+	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63)
 	{
 		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
 		mode = inb(ioaddr + REG2);
@@ -1299,7 +1300,7 @@ set_multicast_list(struct net_device *dev)
 		eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
 	}
 
-	else if (dev->mc_count==0 )
+	else if (mc_count == 0)
 	{
 		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
 		mode = inb(ioaddr + REG2);
@@ -1329,9 +1330,9 @@ set_multicast_list(struct net_device *dev)
 		outw(MC_SETUP, ioaddr + IO_PORT);
 		outw(0, ioaddr + IO_PORT);
 		outw(0, ioaddr + IO_PORT);
-		outw(6*(dev->mc_count + 1), ioaddr + IO_PORT);
+		outw(6 * (mc_count + 1), ioaddr + IO_PORT);
 
-		for (i = 0; i < dev->mc_count; i++)
+		for (i = 0; i < mc_count; i++)
 		{
 			eaddrs=(unsigned short *)dmi->dmi_addr;
 			dmi=dmi->next;
@@ -1348,7 +1349,7 @@ set_multicast_list(struct net_device *dev)
 		outb(MC_SETUP, ioaddr);
 
 		/* Update the transmit queue */
-		i = lp->tx_end + XMT_HEADER + 6*(dev->mc_count + 1);
+		i = lp->tx_end + XMT_HEADER + 6 * (mc_count + 1);
 
 		if (lp->tx_start != lp->tx_end)
 		{
@@ -1380,8 +1381,8 @@ set_multicast_list(struct net_device *dev)
 					break;
 				} else if ((i & 0x0f) == 0x03)	{ /* MC-Done */
 					printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n",
-						dev->name, dev->mc_count,
-						dev->mc_count > 1 ? "es":"");
+						dev->name, mc_count,
+						mc_count > 1 ? "es":"");
 					break;
 				}
 			}
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 6fbfc8eee632..d804ff18eda8 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1578,7 +1578,7 @@ static void eexp_setup_filter(struct net_device *dev)
 {
 	struct dev_mc_list *dmi;
 	unsigned short ioaddr = dev->base_addr;
-	int count = dev->mc_count;
+	int count = netdev_mc_count(dev);
 	int i;
 	if (count > 8) {
 		printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
@@ -1627,9 +1627,9 @@ eexp_set_multicast(struct net_device *dev)
         }
         if (!(dev->flags & IFF_PROMISC)) {
                 eexp_setup_filter(dev);
-                if (lp->old_mc_count != dev->mc_count) {
+                if (lp->old_mc_count != netdev_mc_count(dev)) {
                         kick = 1;
-                        lp->old_mc_count = dev->mc_count;
+                        lp->old_mc_count = netdev_mc_count(dev);
                 }
         }
         if (kick) {
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 7b62336e6736..99e4f8360d2f 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1981,7 +1981,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
 	}
 	ehea_allmulti(dev, 0);
 
-	if (dev->mc_count) {
+	if (!netdev_mc_empty(dev)) {
 		ret = ehea_drop_multicast_list(dev);
 		if (ret) {
 			/* Dropping the current multicast list failed.
@@ -1990,14 +1990,14 @@ static void ehea_set_multicast_list(struct net_device *dev)
 			ehea_allmulti(dev, 1);
 		}
 
-		if (dev->mc_count > port->adapter->max_mc_mac) {
+		if (netdev_mc_count(dev) > port->adapter->max_mc_mac) {
 			ehea_info("Mcast registration limit reached (0x%llx). "
 				  "Use ALLMULTI!",
 				  port->adapter->max_mc_mac);
 			goto out;
 		}
 
-		for (i = 0, k_mcl_entry = dev->mc_list; i < dev->mc_count; i++,
+		for (i = 0, k_mcl_entry = dev->mc_list; i < netdev_mc_count(dev); i++,
 			     k_mcl_entry = k_mcl_entry->next)
 			ehea_add_multicast_entry(port, k_mcl_entry->dmi_addr);
 
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 66813c91a720..3ee32e58c7ec 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1413,7 +1413,7 @@ static void enc28j60_set_multicast_list(struct net_device *dev)
 		if (netif_msg_link(priv))
 			dev_info(&dev->dev, "promiscuous mode\n");
 		priv->rxfilter = RXFILTER_PROMISC;
-	} else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
+	} else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
 		if (netif_msg_link(priv))
 			dev_info(&dev->dev, "%smulticast mode\n",
 				(dev->flags & IFF_ALLMULTI) ? "all-" : "");
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index c81bc4b1816f..94749ebaaea8 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -827,11 +827,11 @@ static void enic_set_multicast_list(struct net_device *netdev)
 	int multicast = (netdev->flags & IFF_MULTICAST) ? 1 : 0;
 	int broadcast = (netdev->flags & IFF_BROADCAST) ? 1 : 0;
 	int promisc = (netdev->flags & IFF_PROMISC) ? 1 : 0;
+	unsigned int mc_count = netdev_mc_count(netdev);
 	int allmulti = (netdev->flags & IFF_ALLMULTI) ||
-	    (netdev->mc_count > ENIC_MULTICAST_PERFECT_FILTERS);
+		       mc_count > ENIC_MULTICAST_PERFECT_FILTERS;
 	unsigned int flags = netdev->flags | (allmulti ? IFF_ALLMULTI : 0);
 	u8 mc_addr[ENIC_MULTICAST_PERFECT_FILTERS][ETH_ALEN];
-	unsigned int mc_count = netdev->mc_count;
 	unsigned int i, j;
 
 	if (mc_count > ENIC_MULTICAST_PERFECT_FILTERS)
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 1f8b11449fad..31a3adb65566 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -1390,20 +1390,20 @@ static void set_rx_mode(struct net_device *dev)
 		outl(0x002C, ioaddr + RxCtrl);
 		/* Unconditionally log net taps. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
-	} else if ((dev->mc_count > 0)  ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((!netdev_mc_empty(dev)) || (dev->flags & IFF_ALLMULTI)) {
 		/* There is apparently a chip bug, so the multicast filter
 		   is never enabled. */
 		/* Too many to filter perfectly -- accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		outl(0x000C, ioaddr + RxCtrl);
-	} else if (dev->mc_count == 0) {
+	} else if (netdev_mc_empty(dev)) {
 		outl(0x0004, ioaddr + RxCtrl);
 		return;
 	} else {					/* Never executed, for now. */
 		struct dev_mc_list *mclist;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next) {
 			unsigned int bit_nr =
 				ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index 71bfeec33a0b..d3abeee3f110 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -1359,7 +1359,7 @@ static void eth16i_multicast(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr;
 
-	if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
+	if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{
 		outb(3, ioaddr + RECEIVE_MODE_REG);
 	} else {
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index dd4ba01fd92d..96817a872f47 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1213,7 +1213,7 @@ static void SetMulticastFilter(struct net_device *dev)
 		}
 
 		/* Update table */
-		for (i = 0; i < dev->mc_count; i++) {	/* for each address in the list */
+		for (i = 0; i < netdev_mc_count(dev); i++) {	/* for each address in the list */
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 			if ((*addrs & 0x01) == 1) {	/* multicast address? */
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index e6a98129d787..f95b5ff0587d 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1786,7 +1786,7 @@ static void __set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = CR_W_PROM | CR_W_AB | CR_W_AM;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
@@ -1796,7 +1796,7 @@ static void __set_rx_mode(struct net_device *dev)
 		int i;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			unsigned int bit;
 			bit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 5d0d33268155..d9d14c83f51c 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1606,7 +1606,7 @@ static void set_multicast_list(struct net_device *dev)
 
 	dmi = dev->mc_list;
 
-	for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) {
+	for (j = 0; j < netdev_mc_count(dev); j++, dmi = dmi->next) {
 		/* Only support group multicast for now */
 		if (!(dmi->dmi_addr[0] & 1))
 			continue;
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 848e8407ea8f..10903b75802f 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -581,7 +581,7 @@ static void mpc52xx_fec_set_multicast_list(struct net_device *dev)
 			u32 gaddr2 = 0x00000000;
 
 			dmi = dev->mc_list;
-			for (i=0; i<dev->mc_count; i++) {
+			for (i=0; i<netdev_mc_count(dev); i++) {
 				crc = ether_crc_le(6, dmi->dmi_addr) >> 26;
 				if (crc >= 32)
 					gaddr1 |= 1 << (crc-32);
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 22e5a847a588..482f27d5f7d4 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -218,7 +218,7 @@ static void set_multicast_finish(struct net_device *dev)
 
 	/* if all multi or too many multicasts; just enable all */
 	if ((dev->flags & IFF_ALLMULTI) != 0 ||
-	    dev->mc_count > FCC_MAX_MULTICAST_ADDRS) {
+	    netdev_mc_count(dev) > FCC_MAX_MULTICAST_ADDRS) {
 
 		W32(ep, fen_gaddrh, 0xffffffff);
 		W32(ep, fen_gaddrl, 0xffffffff);
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index ca7bcb8ab3a1..ddf13ef8ac87 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -220,7 +220,7 @@ static void set_multicast_finish(struct net_device *dev)
 
 	/* if all multi or too many multicasts; just enable all */
 	if ((dev->flags & IFF_ALLMULTI) != 0 ||
-	    dev->mc_count > FEC_MAX_MULTICAST_ADDRS) {
+	    netdev_mc_count(dev) > FEC_MAX_MULTICAST_ADDRS) {
 		fep->fec.hthi = 0xffffffffU;
 		fep->fec.htlo = 0xffffffffU;
 	}
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 008cdd9cc536..141dbc91e5e7 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -213,7 +213,7 @@ static void set_multicast_finish(struct net_device *dev)
 
 	/* if all multi or too many multicasts; just enable all */
 	if ((dev->flags & IFF_ALLMULTI) != 0 ||
-	    dev->mc_count > SCC_MAX_MULTICAST_ADDRS) {
+	    netdev_mc_count(dev) > SCC_MAX_MULTICAST_ADDRS) {
 
 		W16(ep, sen_gaddr1, 0xffff);
 		W16(ep, sen_gaddr2, 0xffff);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 8bd3c9f17532..c9be090485dd 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2863,7 +2863,7 @@ static void gfar_set_multi(struct net_device *dev)
 			em_num = 0;
 		}
 
-		if (dev->mc_count == 0)
+		if (netdev_mc_empty(dev))
 			return;
 
 		/* Parse the list, and set the appropriate bits */
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index dd72c5025e6a..c70b147b4feb 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1854,13 +1854,13 @@ static void set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		writew(0x000F, ioaddr + AddrMode);
-	} else if ((dev->mc_count > 63)  ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((netdev_mc_count(dev) > 63) || (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		writew(0x000B, ioaddr + AddrMode);
-	} else if (dev->mc_count > 0) { /* Must use the CAM filter. */
+	} else if (!netdev_mc_empty(dev)) { /* Must use the CAM filter. */
 		struct dev_mc_list *mclist;
 		int i;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next) {
 			writel(*(u32*)(mclist->dmi_addr), ioaddr + 0x100 + i*8);
 			writel(0x20000 | (*(u16*)&mclist->dmi_addr[4]),
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 0c2f2e8b1c47..debac1bc6799 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2090,7 +2090,7 @@ static void hp100_set_multicast_list(struct net_device *dev)
 		lp->mac2_mode = HP100_MAC2MODE6;	/* promiscuous mode = get all good */
 		lp->mac1_mode = HP100_MAC1MODE6;	/* packets on the net */
 		memset(&lp->hash_bytes, 0xff, 8);
-	} else if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
+	} else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) {
 		lp->mac2_mode = HP100_MAC2MODE5;	/* multicast mode = get packets for */
 		lp->mac1_mode = HP100_MAC1MODE5;	/* me, broadcasts and all multicasts */
 #ifdef HP100_MULTICAST_FILTER	/* doesn't work!!! */
@@ -2104,9 +2104,10 @@ static void hp100_set_multicast_list(struct net_device *dev)
 
 			memset(&lp->hash_bytes, 0x00, 8);
 #ifdef HP100_DEBUG
-			printk("hp100: %s: computing hash filter - mc_count = %i\n", dev->name, dev->mc_count);
+			printk("hp100: %s: computing hash filter - mc_count = %i\n",
+			       dev->name, netdev_mc_count(dev));
 #endif
-			for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) {
+			for (i = 0, dmi = dev->mc_list; i < netdev_mc_count(dev); i++, dmi = dmi->next) {
 				addrs = dmi->dmi_addr;
 				if ((*addrs & 0x01) == 0x01) {	/* multicast address? */
 #ifdef HP100_DEBUG
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index fb5e019169ee..b75d27e82a3d 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -391,7 +391,7 @@ static void emac_hash_mc(struct emac_instance *dev)
 	struct dev_mc_list *dmi;
 	int i;
 
-	DBG(dev, "hash_mc %d" NL, dev->ndev->mc_count);
+	DBG(dev, "hash_mc %d" NL, netdev_mc_count(dev->ndev));
 
 	memset(gaht_temp, 0, sizeof (gaht_temp));
 
@@ -425,9 +425,9 @@ static inline u32 emac_iff2rmr(struct net_device *ndev)
 	if (ndev->flags & IFF_PROMISC)
 		r |= EMAC_RMR_PME;
 	else if (ndev->flags & IFF_ALLMULTI ||
-			 (ndev->mc_count > EMAC_XAHT_SLOTS(dev)))
+			 (netdev_mc_count(ndev) > EMAC_XAHT_SLOTS(dev)))
 		r |= EMAC_RMR_PMME;
-	else if (ndev->mc_count > 0)
+	else if (!netdev_mc_empty(ndev))
 		r |= EMAC_RMR_MAE;
 
 	return r;
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index a86693906ac8..41b9c0efcbdd 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1062,7 +1062,8 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
 	struct ibmveth_adapter *adapter = netdev_priv(netdev);
 	unsigned long lpar_rc;
 
-	if((netdev->flags & IFF_PROMISC) || (netdev->mc_count > adapter->mcastFilterSize)) {
+	if ((netdev->flags & IFF_PROMISC) ||
+	    (netdev_mc_count(netdev) > adapter->mcastFilterSize)) {
 		lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
 					   IbmVethMcastEnableRecv |
 					   IbmVethMcastDisableFiltering,
@@ -1083,7 +1084,7 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
 			ibmveth_error_printk("h_multicast_ctrl rc=%ld when attempting to clear filter table\n", lpar_rc);
 		}
 		/* add the addresses to the filter table */
-		for(i = 0; i < netdev->mc_count; ++i, mclist = mclist->next) {
+		for(i = 0; i < netdev_mc_count(netdev); ++i, mclist = mclist->next) {
 			// add the multicast address to the filter table
 			unsigned long mcast_addr = 0;
 			memcpy(((char *)&mcast_addr)+2, mclist->dmi_addr, 6);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 83cd0d7417d0..28371d648208 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2848,14 +2848,14 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 	u32 vmolr = 0;
 	int i;
 
-	if (!netdev->mc_count) {
+	if (netdev_mc_empty(netdev)) {
 		/* nothing to program, so clear mc list */
 		igb_update_mc_addr_list(hw, NULL, 0);
 		igb_restore_vf_multicasts(adapter);
 		return 0;
 	}
 
-	mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
+	mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
 	if (!mta_list)
 		return -ENOMEM;
 
@@ -2865,7 +2865,7 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 	/* The shared function expects a packed array of only addresses. */
 	mc_ptr = netdev->mc_list;
 
-	for (i = 0; i < netdev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(netdev); i++) {
 		if (!mc_ptr)
 			break;
 		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
@@ -2874,7 +2874,7 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 	igb_update_mc_addr_list(hw, mta_list, i);
 	kfree(mta_list);
 
-	return netdev->mc_count;
+	return netdev_mc_count(netdev);
 }
 
 /**
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 23ce07d3de08..6029c400f2be 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -1403,8 +1403,8 @@ static void igbvf_set_multi(struct net_device *netdev)
 	u8  *mta_list = NULL;
 	int i;
 
-	if (netdev->mc_count) {
-		mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC);
+	if (!netdev_mc_empty(netdev)) {
+		mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
 		if (!mta_list) {
 			dev_err(&adapter->pdev->dev,
 			        "failed to allocate multicast filter list\n");
@@ -1415,7 +1415,7 @@ static void igbvf_set_multi(struct net_device *netdev)
 	/* prepare a packed array of only addresses. */
 	mc_ptr = netdev->mc_list;
 
-	for (i = 0; i < netdev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(netdev); i++) {
 		if (!mc_ptr)
 			break;
 		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr,
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 81a4c5d30733..0bd5fef22d49 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1681,14 +1681,15 @@ static void ioc3_set_multicast_list(struct net_device *dev)
 		ioc3_w_emcr(ip->emcr);			/* Clear promiscuous. */
 		(void) ioc3_r_emcr();
 
-		if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+		if ((dev->flags & IFF_ALLMULTI) ||
+		    (netdev_mc_count(dev) > 64)) {
 			/* Too many for hashing to make sense or we want all
 			   multicast packets anyway,  so skip computing all the
 			   hashes and just accept all packets.  */
 			ip->ehar_h = 0xffffffff;
 			ip->ehar_l = 0xffffffff;
 		} else {
-			for (i = 0; i < dev->mc_count; i++) {
+			for (i = 0; i < netdev_mc_count(dev); i++) {
 				char *addr = dmi->dmi_addr;
 				dmi = dmi->next;
 
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 49f35e2ed19f..dbdebd5efe86 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -585,11 +585,11 @@ static void ipg_nic_set_multicast_list(struct net_device *dev)
 		receivemode = IPG_RM_RECEIVEALLFRAMES;
 	} else if ((dev->flags & IFF_ALLMULTI) ||
 		   ((dev->flags & IFF_MULTICAST) &&
-		    (dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) {
+		    (netdev_mc_count(dev) > IPG_MULTICAST_HASHTABLE_SIZE))) {
 		/* NIC to be configured to receive all multicast
 		 * frames. */
 		receivemode |= IPG_RM_RECEIVEMULTICAST;
-	} else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) {
+	} else if ((dev->flags & IFF_MULTICAST) && !netdev_mc_empty(dev)) {
 		/* NIC to be configured to receive selected
 		 * multicast addresses. */
 		receivemode |= IPG_RM_RECEIVEMULTICASTHASH;
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index 04d0502726c0..bb4a3cda6e4b 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -655,14 +655,15 @@ set_multicast_list(struct net_device *dev)
 		/* Enable promiscuous mode */
 		outw(MULTICAST|PROMISC, ioaddr);
 	}
-	else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
+	else if ((dev->flags&IFF_ALLMULTI) ||
+		 netdev_mc_count(dev) > HW_MAX_ADDRS)
 	{
 		/* Disable promiscuous mode, use normal mode. */
 		hardware_set_filter(NULL);
 
 		outw(MULTICAST, ioaddr);
 	}
-	else if(dev->mc_count)
+	else if (!netdev_mc_empty(dev))
 	{
 		/* Walk the address list, and load the filter */
 		hardware_set_filter(dev->mc_list);
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 16c91910d6c1..ff015e15f5d1 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -958,7 +958,7 @@ static void veth_set_multicast_list(struct net_device *dev)
 	write_lock_irqsave(&port->mcast_gate, flags);
 
 	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
-			(dev->mc_count > VETH_MAX_MCAST)) {
+			(netdev_mc_count(dev) > VETH_MAX_MCAST)) {
 		port->promiscuous = 1;
 	} else {
 		struct dev_mc_list *dmi = dev->mc_list;
@@ -969,7 +969,7 @@ static void veth_set_multicast_list(struct net_device *dev)
 		/* Update table */
 		port->num_mcast = 0;
 
-		for (i = 0; i < dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			u8 *addr = dmi->dmi_addr;
 			u64 xaddr = 0;
 
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index c56ea69762cd..6a7b2ccef72c 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1077,7 +1077,7 @@ ixgb_set_multi(struct net_device *netdev)
 		rctl |= IXGB_RCTL_VFE;
 	}
 
-	if (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
+	if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
 		rctl |= IXGB_RCTL_MPE;
 		IXGB_WRITE_REG(hw, RCTL, rctl);
 	} else {
@@ -1092,7 +1092,7 @@ ixgb_set_multi(struct net_device *netdev)
 			memcpy(&mta[i * IXGB_ETH_LENGTH_OF_ADDRESS],
 			       mc_ptr->dmi_addr, IXGB_ETH_LENGTH_OF_ADDRESS);
 
-		ixgb_mc_addr_list_update(hw, mta, netdev->mc_count, 0);
+		ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
 	}
 }
 
@@ -1616,7 +1616,7 @@ ixgb_update_stats(struct ixgb_adapter *adapter)
 		return;
 
 	if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
-	   (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
+	   (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
 		u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL);
 		u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL);
 		u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 382bf8945d11..0792f151de99 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2571,7 +2571,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 	hw->mac.ops.update_uc_addr_list(hw, netdev);
 
 	/* reprogram multicast list */
-	addr_count = netdev->mc_count;
+	addr_count = netdev_mc_count(netdev);
 	if (addr_count)
 		addr_list = netdev->mc_list->dmi_addr;
 	hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index b9f10d05049d..235b5fd4b8d4 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -1527,7 +1527,7 @@ static void ixgbevf_set_rx_mode(struct net_device *netdev)
 	int addr_count = 0;
 
 	/* reprogram multicast list */
-	addr_count = netdev->mc_count;
+	addr_count = netdev_mc_count(netdev);
 	if (addr_count)
 		addr_list = netdev->mc_list->dmi_addr;
 	if (hw->mac.ops.update_mc_addr_list)
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 26eed49d3208..d44c39dfbef1 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2013,7 +2013,7 @@ jme_set_multi(struct net_device *netdev)
 
 		jme->reg_rxmcs |= RXMCS_MULFRAME | RXMCS_MULFILTERED;
 		for (i = 0, mclist = netdev->mc_list;
-			mclist && i < netdev->mc_count;
+			mclist && i < netdev_mc_count(netdev);
 			++i, mclist = mclist->next) {
 
 			bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3F;
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 25e2af6997e4..af0c764130e6 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -490,19 +490,19 @@ static void korina_multicast_list(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC)
 		recognise |= ETH_ARC_PRO;
 
-	else if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 4))
+	else if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 4))
 		/* All multicast and broadcast */
 		recognise |= ETH_ARC_AM;
 
 	/* Build the hash table */
-	if (dev->mc_count > 4) {
+	if (netdev_mc_count(dev) > 4) {
 		u16 hash_table[4];
 		u32 crc;
 
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			char *addrs = dmi->dmi_addr;
 
 			dmi = dmi->next;
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 6d3ac65bc35c..9845ab1e5573 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -965,14 +965,14 @@ static void ks8851_set_rx_mode(struct net_device *dev)
 
 		rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
 				RXCR1_RXPAFMA | RXCR1_RXMAFMA);
-	} else if (dev->flags & IFF_MULTICAST && dev->mc_count > 0) {
+	} else if (dev->flags & IFF_MULTICAST && !netdev_mc_empty(dev)) {
 		struct dev_mc_list *mcptr = dev->mc_list;
 		u32 crc;
 		int i;
 
 		/* accept some multicast */
 
-		for (i = dev->mc_count; i > 0; i--) {
+		for (i = netdev_mc_count(dev); i > 0; i--) {
 			crc = ether_crc(ETH_ALEN, mcptr->dmi_addr);
 			crc >>= (32 - 6);  /* get top six bits */
 
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index c0ceebccaa49..ffffb3889704 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -1193,8 +1193,8 @@ static void ks_set_rx_mode(struct net_device *netdev)
 	else
 		ks_set_promis(ks, false);
 
-	if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) {
-		if (netdev->mc_count <= MAX_MCAST_LST) {
+	if ((netdev->flags & IFF_MULTICAST) && netdev_mc_count(netdev)) {
+		if (netdev_mc_count(netdev) <= MAX_MCAST_LST) {
 			int i = 0;
 			for (ptr = netdev->mc_list; ptr; ptr = ptr->next) {
 				if (!(*ptr->dmi_addr & 1))
diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index 8d7d3d4625f6..7b9447646f8a 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -1288,7 +1288,7 @@ static void set_multicast_list(struct net_device *dev)
 	} else {
 		short multicast_table[4];
 		int i;
-		int num_addrs=dev->mc_count;
+		int num_addrs=netdev_mc_count(dev);
 		if(dev->flags&IFF_ALLMULTI)
 			num_addrs=1;
 		/* FIXIT: We don't use the multicast table, but rely on upper-layer filtering. */
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index b60efd4bd017..371b58b1d151 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1380,21 +1380,21 @@ static void set_multicast_list(struct net_device *dev)
 		}
 	}
 
-	cnt = dev->mc_count;
+	cnt = netdev_mc_count(dev);
 	if (cnt > MAX_MC_CNT) {
 		cnt = MAX_MC_CNT;
 		printk(KERN_NOTICE "%s: Only %d multicast addresses supported",
 			dev->name, cnt);
 	}
 
-	if (dev->mc_count > 0) {
+	if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *dmi;
 		unsigned char *cp;
 		struct mc_cmd *cmd;
 
 		cmd = &dma->mc_cmd;
 		cmd->cmd.command = SWAP16(CmdMulticastList);
-		cmd->mc_cnt = SWAP16(dev->mc_count * 6);
+		cmd->mc_cnt = SWAP16(netdev_mc_count(dev) * 6);
 		cp = cmd->mc_addrs;
 		for (dmi = dev->mc_list;
 		     cnt && dmi != NULL;
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index a8522bd73ae7..8442c47e93e8 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -232,7 +232,7 @@ static void temac_set_multicast_list(struct net_device *ndev)
 
 	mutex_lock(&lp->indirect_mutex);
 	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
-	    ndev->mc_count > MULTICAST_CAM_TABLE_NUM) {
+	    netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM) {
 		/*
 		 *	We must make the kernel realise we had to move
 		 *	into promisc mode or we start all out war on
@@ -242,9 +242,9 @@ static void temac_set_multicast_list(struct net_device *ndev)
 		ndev->flags |= IFF_PROMISC;
 		temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
 		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
-	} else if (ndev->mc_count) {
+	} else if (!netdev_mc_empty(ndev)) {
 		struct dev_mc_list *mclist = ndev->mc_list;
-		for (i = 0; mclist && i < ndev->mc_count; i++) {
+		for (i = 0; mclist && i < netdev_mc_count(ndev); i++) {
 
 			if (i >= MULTICAST_CAM_TABLE_NUM)
 				break;
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index e20fefc73c8b..b1f5d79af61f 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -1253,18 +1253,19 @@ static void set_multicast_list(struct net_device *dev) {
 
 	if (i596_debug > 1)
 		printk ("%s: set multicast list %d\n",
-			dev->name, dev->mc_count);
+			dev->name, netdev_mc_count(dev));
 
-	if (dev->mc_count > 0) {
+	if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *dmi;
 		char *cp;
-		cmd = kmalloc(sizeof(struct i596_cmd)+2+dev->mc_count*6, GFP_ATOMIC);
+		cmd = kmalloc(sizeof(struct i596_cmd) + 2 +
+			      netdev_mc_count(dev) * 6, GFP_ATOMIC);
 		if (cmd == NULL) {
 			printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name);
 			return;
 		}
 		cmd->command = CmdMulticastList;
-		*((unsigned short *) (cmd + 1)) = dev->mc_count * 6;
+		*((unsigned short *) (cmd + 1)) = netdev_mc_count(dev) * 6;
 		cp = ((char *)(cmd + 1))+2;
 		for (dmi = dev->mc_list; dmi != NULL; dmi = dmi->next) {
 			memcpy(cp, dmi,6);
@@ -1277,7 +1278,8 @@ static void set_multicast_list(struct net_device *dev) {
 		if (lp->set_conf.pa_next != I596_NULL) {
 			return;
 		}
-		if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
+		if (netdev_mc_empty(dev) &&
+		    !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
 			lp->i596_config[8] &= ~0x01;
 		} else {
 			lp->i596_config[8] |= 0x01;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 1d0d4d9ab623..fbc371fa19b5 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -901,7 +901,7 @@ static void macb_sethashtable(struct net_device *dev)
 	mc_filter[0] = mc_filter[1] = 0;
 
 	curr = dev->mc_list;
-	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
+	for (i = 0; i < netdev_mc_count(dev); i++, curr = curr->next) {
 		if (!curr) break;	/* unexpected end of list */
 
 		bitnr = hash_get_index(curr->dmi_addr);
@@ -934,7 +934,7 @@ static void macb_set_rx_mode(struct net_device *dev)
 		macb_writel(bp, HRB, -1);
 		macb_writel(bp, HRT, -1);
 		cfg |= MACB_BIT(NCFGR_MTI);
-	} else if (dev->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev)) {
 		/* Enable specific multicasts */
 		macb_sethashtable(dev);
 		cfg |= MACB_BIT(NCFGR_MTI);
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index d9fbad386389..fdb0bbdd6782 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -606,7 +606,7 @@ static void mace_set_multicast(struct net_device *dev)
 	} else {
 	    for (i = 0; i < 8; i++)
 		multicast_filter[i] = 0;
-	    for (i = 0; i < dev->mc_count; i++) {
+	    for (i = 0; i < netdev_mc_count(dev); i++) {
 	        crc = ether_crc_le(6, dmi->dmi_addr);
 		j = crc >> 26;	/* bit number in multicast_filter */
 		multicast_filter[j >> 3] |= 1 << (j & 7);
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index 44f3c2896f20..740accbf0806 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -518,7 +518,7 @@ static void mace_set_multicast(struct net_device *dev)
 		} else {
 			for (i = 0; i < 8; i++)
 				multicast_filter[i] = 0;
-			for (i = 0; i < dev->mc_count; i++) {
+			for (i = 0; i < netdev_mc_count(dev); i++) {
 				crc = ether_crc_le(6, dmi->dmi_addr);
 				j = crc >> 26;	/* bit number in multicast_filter */
 				multicast_filter[j >> 3] |= 1 << (j & 7);
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 2d7b3bbfed01..c64e5b0d3596 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2488,7 +2488,7 @@ static void __set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
 		rx_mode = RxFilterEnable | AcceptBroadcast
 			| AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		rx_mode = RxFilterEnable | AcceptBroadcast
 			| AcceptAllMulticast | AcceptMyPhys;
@@ -2496,7 +2496,7 @@ static void __set_rx_mode(struct net_device *dev)
 		struct dev_mc_list *mclist;
 		int i;
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next) {
 			int b = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
 			mc_filter[b/8] |= (1 << (b & 0x07));
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index dd45c7a9122e..25f4414cc33e 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -554,7 +554,7 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 		return;
 	}
 
-	if (netdev->mc_count == 0) {
+	if (netdev_mc_empty(netdev)) {
 		adapter->set_promisc(adapter,
 				NETXEN_NIU_NON_PROMISC_MODE);
 		netxen_nic_disable_mcast_filter(adapter);
@@ -563,7 +563,7 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 
 	adapter->set_promisc(adapter, NETXEN_NIU_ALLMULTI_MODE);
 	if (netdev->flags & IFF_ALLMULTI ||
-			netdev->mc_count > adapter->max_mc_count) {
+			netdev_mc_count(netdev) > adapter->max_mc_count) {
 		netxen_nic_disable_mcast_filter(adapter);
 		return;
 	}
@@ -573,7 +573,7 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next, index++)
 		netxen_nic_set_mcast_addr(adapter, index, mc_ptr->dmi_addr);
 
-	if (index != netdev->mc_count)
+	if (index != netdev_mc_count(netdev))
 		printk(KERN_WARNING "%s: %s multicast address count mismatch\n",
 			netxen_nic_driver_name, netdev->name);
 
@@ -704,12 +704,12 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	}
 
 	if ((netdev->flags & IFF_ALLMULTI) ||
-			(netdev->mc_count > adapter->max_mc_count)) {
+			(netdev_mc_count(netdev) > adapter->max_mc_count)) {
 		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
 		goto send_fw_cmd;
 	}
 
-	if (netdev->mc_count > 0) {
+	if (!netdev_mc_empty(netdev)) {
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 		     mc_ptr = mc_ptr->next) {
 			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr, &del_list);
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index b42f5e522f90..497c6d514a68 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -597,7 +597,7 @@ static int init586(struct net_device *dev)
 	struct tdr_cmd_struct __iomem *tdr_cmd;
 	struct mcsetup_cmd_struct __iomem *mc_cmd;
 	struct dev_mc_list *dmi = dev->mc_list;
-	int num_addrs = dev->mc_count;
+	int num_addrs = netdev_mc_count(dev);
 
 	ptr = p->scb + 1;
 
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index ae19aafd2c7e..9225c76cac40 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -849,7 +849,7 @@ static int ni65_lance_reinit(struct net_device *dev)
 
 	 if(dev->flags & IFF_PROMISC)
 		 ni65_init_lance(p,dev->dev_addr,0x00,M_PROM);
-	 else if(dev->mc_count || dev->flags & IFF_ALLMULTI)
+	 else if (netdev_mc_count(dev) || dev->flags & IFF_ALLMULTI)
 		 ni65_init_lance(p,dev->dev_addr,0xff,0x0);
 	 else
 		 ni65_init_lance(p,dev->dev_addr,0x00,0x00);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index af9a8647c7e8..7b52d9762b00 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6369,7 +6369,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	np->flags &= ~(NIU_FLAGS_MCAST | NIU_FLAGS_PROMISC);
 	if (dev->flags & IFF_PROMISC)
 		np->flags |= NIU_FLAGS_PROMISC;
-	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
+	if ((dev->flags & IFF_ALLMULTI) || (!netdev_mc_empty(dev)))
 		np->flags |= NIU_FLAGS_MCAST;
 
 	alt_cnt = netdev_uc_count(dev);
@@ -6412,7 +6412,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_ALLMULTI) {
 		for (i = 0; i < 16; i++)
 			hash[i] = 0xffff;
-	} else if (dev->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev)) {
 		for (addr = dev->mc_list; addr; addr = addr->next) {
 			u32 crc = ether_crc_le(ETH_ALEN, addr->da_addr);
 
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index a3b6aa0f375d..8dd509c09bc8 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1719,7 +1719,7 @@ static void ns83820_set_multicast(struct net_device *ndev)
 	else
 		and_mask &= ~(RFCR_AAU | RFCR_AAM);
 
-	if (ndev->flags & IFF_ALLMULTI || ndev->mc_count)
+	if (ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev))
 		or_mask |= RFCR_AAM;
 	else
 		and_mask &= ~RFCR_AAM;
diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c
index 6fd8789ef487..3a0f910924a5 100644
--- a/drivers/net/octeon/octeon_mgmt.c
+++ b/drivers/net/octeon/octeon_mgmt.c
@@ -493,8 +493,8 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
 	}
 
 	if (netdev->flags & IFF_MULTICAST) {
-		if (cam_mode == 0 || (netdev->flags & IFF_ALLMULTI)
-		    || netdev->mc_count  > available_cam_entries)
+		if (cam_mode == 0 || (netdev->flags & IFF_ALLMULTI) ||
+		    netdev_mc_count(netdev) > available_cam_entries)
 			multicast_mode = 2; /* 1 - Accept all multicast.  */
 		else
 			multicast_mode = 0; /* 0 - Use CAM.  */
@@ -511,7 +511,7 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
 		}
 	}
 	if (multicast_mode == 0) {
-		i = netdev->mc_count;
+		i = netdev_mc_count(netdev);
 		list = netdev->mc_list;
 		while (i--) {
 			octeon_mgmt_cam_state_add(&cam_state, list->da_addr);
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 20273832bfce..bbdf0398c93f 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1820,7 +1820,7 @@ static void netdrv_set_rx_mode (struct net_device *dev)
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
@@ -1829,7 +1829,7 @@ static void netdrv_set_rx_mode (struct net_device *dev)
 		struct dev_mc_list *mclist;
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 98938ea9e0bd..3d1d3a7b7ed3 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1148,7 +1148,7 @@ static void set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC)
 		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
 			 ioaddr + EL3_CMD);
-	else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
+	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
 		outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
 	else
 		outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 322e11df0097..091e0b00043e 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -886,7 +886,7 @@ static void set_rx_mode(struct net_device *dev)
 
     if (dev->flags & IFF_PROMISC)
 	opts |= RxMulticast | RxProm;
-    else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
+    else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
 	opts |= RxMulticast;
     outw(opts, ioaddr + EL3_CMD);
 }
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 7b17404d0858..3d573ed5f7c5 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -1187,19 +1187,19 @@ static void set_rx_mode(struct net_device *dev)
     if (dev->flags & IFF_PROMISC) {
 	memset(mc_filter, 0xff, sizeof(mc_filter));
 	outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
-    } else if (dev->mc_count > MC_FILTERBREAK ||
+    } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
 	       (dev->flags & IFF_ALLMULTI)) {
 	/* Too many to filter perfectly -- accept all multicasts. */
 	memset(mc_filter, 0xff, sizeof(mc_filter));
 	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
-    } else if (dev->mc_count == 0) {
+    } else if (netdev_mc_empty(dev)) {
 	memset(mc_filter, 0x00, sizeof(mc_filter));
 	outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
     } else {
 	struct dev_mc_list *mclist;
 
 	memset(mc_filter, 0, sizeof(mc_filter));
-	for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+	for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 	     i++, mclist = mclist->next) {
 	    unsigned int bit =
 	    	ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 12e3233868e9..c42a31a97fa3 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1481,8 +1481,8 @@ static void set_multicast_list(struct net_device *dev)
 #ifdef PCMCIA_DEBUG
   {
     static int old;
-    if (dev->mc_count != old) {
-      old = dev->mc_count;
+    if (netdev_mc_count(dev) != old) {
+      old = netdev_mc_count(dev);
       pr_debug("%s: setting Rx mode to %d addresses.\n",
 	    dev->name, old);
     }
@@ -1490,13 +1490,13 @@ static void set_multicast_list(struct net_device *dev)
 #endif
 
   /* Set multicast_num_addrs. */
-  lp->multicast_num_addrs = dev->mc_count;
+  lp->multicast_num_addrs = netdev_mc_count(dev);
 
   /* Set multicast_ladrf. */
   if (num_addrs > 0) {
     /* Calculate multicast logical address filter */
     memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
-    for (i = 0; i < dev->mc_count; i++) {
+    for (i = 0; i < netdev_mc_count(dev); i++) {
       memcpy(adr, dmi->dmi_addr, ETHER_ADDR_LEN);
       dmi = dmi->next;
       BuildLAF(lp->multicast_ladrf, adr);
@@ -1537,15 +1537,15 @@ static void set_multicast_list(struct net_device *dev)
 #ifdef PCMCIA_DEBUG
   {
     static int old;
-    if (dev->mc_count != old) {
-      old = dev->mc_count;
+    if (netdev_mc_count(dev) != old) {
+      old = netdev_mc_count(dev);
       pr_debug("%s: setting Rx mode to %d addresses.\n",
 	    dev->name, old);
     }
   }
 #endif
 
-  lp->multicast_num_addrs = dev->mc_count;
+  lp->multicast_num_addrs = netdev_mc_count(dev);
   restore_multicast_list(dev);
 
 } /* set_multicast_list */
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 6dd486d2977b..d2e86b8887c8 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1638,8 +1638,8 @@ static void set_rx_mode(struct net_device *dev)
     } else if (dev->flags & IFF_ALLMULTI)
 	rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
     else {
-	if (dev->mc_count)  {
-	    fill_multicast_tbl(dev->mc_count, dev->mc_list,
+	if (!netdev_mc_empty(dev)) {
+	    fill_multicast_tbl(netdev_mc_count(dev), dev->mc_list,
 			       (u_char *)multicast_table);
 	}
 	rx_cfg_setting = RxStripCRC | RxEnable;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 466fc72698c0..4ace18a71152 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1384,7 +1384,7 @@ set_addresses(struct net_device *dev)
 	    if (++n > 9)
 		break;
 	    i = 0;
-	    if (n > 1 && n <= dev->mc_count && dmi) {
+	    if (n > 1 && n <= netdev_mc_count(dev) && dmi) {
 	   	 dmi = dmi->next;
 	    }
 	}
@@ -1394,7 +1394,7 @@ set_addresses(struct net_device *dev)
 	    SelectPage(k);
 	}
 
-	if (n && n <= dev->mc_count && dmi)
+	if (n && n <= netdev_mc_count(dev) && dmi)
 	    addr = dmi->dmi_addr;
 	else
 	    addr = dev->dev_addr;
@@ -1424,9 +1424,9 @@ set_multicast_list(struct net_device *dev)
 
     if (dev->flags & IFF_PROMISC) { /* snoop */
 	PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
-    } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
+    } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) {
 	PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
-    } else if (dev->mc_count) {
+    } else if (!netdev_mc_empty(dev)) {
 	/* the chip can filter 9 addresses perfectly */
 	PutByte(XIRCREG42_SWC1, value | 0x01);
 	SelectPage(0x40);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 0dc7ff896eeb..3522794550dd 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -2698,7 +2698,7 @@ static void pcnet32_load_multicast(struct net_device *dev)
 	ib->filter[1] = 0;
 
 	/* Add addresses */
-	for (i = 0; i < dev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(dev); i++) {
 		addrs = dmi->dmi_addr;
 		dmi = dmi->next;
 
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 0c768593aad0..c19dd4a6cd76 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -568,7 +568,7 @@ void gelic_net_set_multi(struct net_device *netdev)
 			status);
 
 	if ((netdev->flags & IFF_ALLMULTI) ||
-	    (netdev->mc_count > GELIC_NET_MC_COUNT_MAX)) {
+	    (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
 		status = lv1_net_add_multicast_address(bus_id(card),
 						       dev_id(card),
 						       0, 1);
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index dc6cd69d6d93..8ea7f869e293 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -447,12 +447,12 @@ void qlcnic_set_multi(struct net_device *netdev)
 	}
 
 	if ((netdev->flags & IFF_ALLMULTI) ||
-			(netdev->mc_count > adapter->max_mc_count)) {
+	    (netdev_mc_count(netdev) > adapter->max_mc_count)) {
 		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
 		goto send_fw_cmd;
 	}
 
-	if (netdev->mc_count > 0) {
+	if (!netdev_mc_empty(netdev)) {
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 				     mc_ptr = mc_ptr->next) {
 			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 3cb60e10d456..dd3e0f1b2965 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4221,7 +4221,7 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 	 * transition is taking place.
 	 */
 	if ((ndev->flags & IFF_ALLMULTI) ||
-	    (ndev->mc_count > MAX_MULTICAST_ENTRIES)) {
+	    (netdev_mc_count(ndev) > MAX_MULTICAST_ENTRIES)) {
 		if (!test_bit(QL_ALLMULTI, &qdev->flags)) {
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) {
@@ -4243,7 +4243,7 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		}
 	}
 
-	if (ndev->mc_count) {
+	if (!netdev_mc_empty(ndev)) {
 		status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
 		if (status)
 			goto exit;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index d68ba7a58631..b8103425facb 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -958,21 +958,22 @@ static void r6040_multicast_list(struct net_device *dev)
 	}
 	/* Too many multicast addresses
 	 * accept all traffic */
-	else if ((dev->mc_count > MCAST_MAX) || (dev->flags & IFF_ALLMULTI))
+	else if ((netdev_mc_count(dev) > MCAST_MAX) ||
+		 (dev->flags & IFF_ALLMULTI))
 		reg |= 0x0020;
 
 	iowrite16(reg, ioaddr);
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	/* Build the hash table */
-	if (dev->mc_count > MCAST_MAX) {
+	if (netdev_mc_count(dev) > MCAST_MAX) {
 		u16 hash_table[4];
 		u32 crc;
 
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			char *addrs = dmi->dmi_addr;
 
 			dmi = dmi->next;
@@ -994,14 +995,14 @@ static void r6040_multicast_list(struct net_device *dev)
 		iowrite16(hash_table[3], ioaddr + MAR3);
 	}
 	/* Multicast Address 1~4 case */
-	for (i = 0, dmi; (i < dev->mc_count) && (i < MCAST_MAX); i++) {
+	for (i = 0, dmi; (i < netdev_mc_count(dev)) && (i < MCAST_MAX); i++) {
 		adrp = (u16 *)dmi->dmi_addr;
 		iowrite16(adrp[0], ioaddr + MID_1L + 8*i);
 		iowrite16(adrp[1], ioaddr + MID_1M + 8*i);
 		iowrite16(adrp[2], ioaddr + MID_1H + 8*i);
 		dmi = dmi->next;
 	}
-	for (i = dev->mc_count; i < MCAST_MAX; i++) {
+	for (i = netdev_mc_count(dev); i < MCAST_MAX; i++) {
 		iowrite16(0xffff, ioaddr + MID_0L + 8*i);
 		iowrite16(0xffff, ioaddr + MID_0M + 8*i);
 		iowrite16(0xffff, ioaddr + MID_0H + 8*i);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c1bb24cf0793..85c635f354b5 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4758,7 +4758,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
@@ -4769,7 +4769,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
 
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index d1664586e8ff..102be16e9b52 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -5055,8 +5055,8 @@ static void s2io_set_multicast(struct net_device *dev)
 	}
 
 	/*  Update individual M_CAST address list */
-	if ((!sp->m_cast_flg) && dev->mc_count) {
-		if (dev->mc_count >
+	if ((!sp->m_cast_flg) && netdev_mc_count(dev)) {
+		if (netdev_mc_count(dev) >
 		    (config->max_mc_addr - config->max_mac_addr)) {
 			DBG_PRINT(ERR_DBG,
 				  "%s: No more Rx filters can be added - "
@@ -5066,7 +5066,7 @@ static void s2io_set_multicast(struct net_device *dev)
 		}
 
 		prev_cnt = sp->mc_addr_count;
-		sp->mc_addr_count = dev->mc_count;
+		sp->mc_addr_count = netdev_mc_count(dev);
 
 		/* Clear out the previous list of Mc in the H/W. */
 		for (i = 0; i < prev_cnt; i++) {
@@ -5092,7 +5092,7 @@ static void s2io_set_multicast(struct net_device *dev)
 		}
 
 		/* Create the new Rx filter list and update the same in H/W. */
-		for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
 			       ETH_ALEN);
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index fd8cb506a2bb..00ff8995ad69 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -429,7 +429,7 @@ static void _sc92031_set_mar(struct net_device *dev)
 	u32 mar0 = 0, mar1 = 0;
 
 	if ((dev->flags & IFF_PROMISC) ||
-	    dev->mc_count > multicast_filter_limit ||
+	    netdev_mc_count(dev) > multicast_filter_limit ||
 	    (dev->flags & IFF_ALLMULTI))
 		mar0 = mar1 = 0xffffffff;
 	else if (dev->flags & IFF_MULTICAST) {
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 62d5cd51a9dd..fafaf30ecd9a 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1615,7 +1615,7 @@ static void efx_set_multicast_list(struct net_device *net_dev)
 		memset(mc_hash, 0xff, sizeof(*mc_hash));
 	} else {
 		memset(mc_hash, 0x00, sizeof(*mc_hash));
-		for (i = 0; i < net_dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(net_dev); i++) {
 			crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr);
 			bit = crc & (EFX_MCAST_HASH_ENTRIES - 1);
 			set_bit_le(bit, mc_hash->byte);
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 6b364a6c6c60..ed999d31f1fa 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -660,7 +660,7 @@ static void sgiseeq_set_multicast(struct net_device *dev)
 
 	if(dev->flags & IFF_PROMISC)
 		sp->mode = SEEQ_RCMD_RANY;
-	else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count)
+	else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
 		sp->mode = SEEQ_RCMD_RBMCAST;
 	else
 		sp->mode = SEEQ_RCMD_RBCAST;
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 626de766443a..8c4e38f9ebf7 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -841,7 +841,7 @@ static void sis190_set_rx_mode(struct net_device *dev)
 			AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 			AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
@@ -852,7 +852,7 @@ static void sis190_set_rx_mode(struct net_device *dev)
 
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			int bit_nr =
 				ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 20c5ce474891..32ae87c09f5e 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -2288,7 +2288,7 @@ static void set_rx_mode(struct net_device *net_dev)
 		rx_mode = RFPromiscuous;
 		for (i = 0; i < table_entries; i++)
 			mc_filter[i] = 0xffff;
-	} else if ((net_dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(net_dev) > multicast_filter_limit) ||
 		   (net_dev->flags & IFF_ALLMULTI)) {
 		/* too many multicast addresses or accept all multicast packet */
 		rx_mode = RFAAB | RFAAM;
@@ -2301,7 +2301,7 @@ static void set_rx_mode(struct net_device *net_dev)
 		struct dev_mc_list *mclist;
 		rx_mode = RFAAB;
 		for (i = 0, mclist = net_dev->mc_list;
-			mclist && i < net_dev->mc_count;
+			mclist && i < netdev_mc_count(net_dev);
 			i++, mclist = mclist->next) {
 			unsigned int bit_nr =
 				sis900_mcast_bitnr(mclist->dmi_addr, sis_priv->chipset_rev);
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 6b955a4f19b2..346adfae986f 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -872,14 +872,14 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 		if (dev->flags & IFF_ALLMULTI) {
 			mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
 			pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
-		} else if (dev->mc_count > 0) {
-			if (dev->mc_count <= FPMAX_MULTICAST) {
+		} else if (!netdev_mc_empty(dev)) {
+			if (netdev_mc_count(dev) <= FPMAX_MULTICAST) {
 				/* use exact filtering */
 
 				// point to first multicast addr
 				dmi = dev->mc_list;
 
-				for (i = 0; i < dev->mc_count; i++) {
+				for (i = 0; i < netdev_mc_count(dev); i++) {
 					mac_add_multicast(smc, 
 							  (struct fddi_addr *)dmi->dmi_addr, 
 							  1);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 5ff46eb18d0c..36ead52dea71 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2932,7 +2932,7 @@ static void genesis_set_multicast(struct net_device *dev)
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
-	int i, count = dev->mc_count;
+	int i, count = netdev_mc_count(dev);
 	struct dev_mc_list *list = dev->mc_list;
 	u32 mode;
 	u8 filter[8];
@@ -2987,7 +2987,7 @@ static void yukon_set_multicast(struct net_device *dev)
 		reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
 	else if (dev->flags & IFF_ALLMULTI)	/* all multicast */
 		memset(filter, 0xff, sizeof(filter));
-	else if (dev->mc_count == 0 && !rx_pause)/* no multicast */
+	else if (netdev_mc_empty(dev) && !rx_pause)/* no multicast */
 		reg &= ~GM_RXCR_MCF_ENA;
 	else {
 		int i;
@@ -2996,7 +2996,7 @@ static void yukon_set_multicast(struct net_device *dev)
 		if (rx_pause)
 			yukon_add_filter(filter, pause_mc_addr);
 
-		for (i = 0; list && i < dev->mc_count; i++, list = list->next)
+		for (i = 0; list && i < netdev_mc_count(dev); i++, list = list->next)
 			yukon_add_filter(filter, list->dmi_addr);
 	}
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 478288b8bc21..45299d663498 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3626,7 +3626,7 @@ static void sky2_set_multicast(struct net_device *dev)
 		reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
 	else if (dev->flags & IFF_ALLMULTI)
 		memset(filter, 0xff, sizeof(filter));
-	else if (dev->mc_count == 0 && !rx_pause)
+	else if (netdev_mc_empty(dev) && !rx_pause)
 		reg &= ~GM_RXCR_MCF_ENA;
 	else {
 		int i;
@@ -3635,7 +3635,7 @@ static void sky2_set_multicast(struct net_device *dev)
 		if (rx_pause)
 			sky2_add_filter(filter, pause_mc_addr);
 
-		for (i = 0; list && i < dev->mc_count; i++, list = list->next)
+		for (i = 0; list && i < netdev_mc_count(dev); i++, list = list->next)
 			sky2_add_filter(filter, list->dmi_addr);
 	}
 
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 3c5a4f52345c..ef9674c6713f 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1323,7 +1323,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	 * I don't need to zero the multicast table, because the flag is
 	 * checked before the table is
 	 */
-	else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) {
+	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
 		DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name);
 		mcr |= MAC_CR_MCPAS_;
 	}
@@ -1340,7 +1340,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	 * the number of the 32 bit register, while the low 5 bits are the bit
 	 * within that register.
 	 */
-	else if (dev->mc_count)  {
+	else if (!netdev_mc_empty(dev)) {
 		int i;
 		struct dev_mc_list *cur_addr;
 
@@ -1351,7 +1351,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 		memset(multicast_table, 0, sizeof(multicast_table));
 
 		cur_addr = dev->mc_list;
-		for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
+		for (i = 0; i < netdev_mc_count(dev); i++, cur_addr = cur_addr->next) {
 			u32 position;
 
 			/* do we have a pointer here? */
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index 8371b82323ac..41c3dddeab50 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -1542,7 +1542,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 	/* We just get all multicast packets even if we only want them
 	 . from one source.  This will be changed at some future
 	 . point. */
-	else if (dev->mc_count )  {
+	else if (!netdev_mc_empty(dev)) {
 		/* support hardware multicasting */
 
 		/* be sure I get rid of flags I might have set */
@@ -1550,7 +1550,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 			ioaddr + RCR );
 		/* NOTE: this has to set the bank, so make sure it is the
 		   last thing called.  The bank is set to zero at the top */
-		smc_setmulticast( ioaddr, dev->mc_count, dev->mc_list );
+		smc_setmulticast(ioaddr, netdev_mc_count(dev), dev->mc_list);
 	}
 	else  {
 		outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index ea4fae79d6ec..66450127c5a1 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1395,7 +1395,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 	 * I don't need to zero the multicast table, because the flag is
 	 * checked before the table is
 	 */
-	else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) {
+	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
 		DBG(2, "%s: RCR_ALMUL\n", dev->name);
 		lp->rcr_cur_mode |= RCR_ALMUL;
 	}
@@ -1412,7 +1412,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 	 * the number of the 8 bit register, while the low 3 bits are the bit
 	 * within that register.
 	 */
-	else if (dev->mc_count)  {
+	else if (!netdev_mc_empty(dev)) {
 		int i;
 		struct dev_mc_list *cur_addr;
 
@@ -1423,7 +1423,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 		memset(multicast_table, 0, sizeof(multicast_table));
 
 		cur_addr = dev->mc_list;
-		for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
+		for (i = 0; i < netdev_mc_count(dev); i++, cur_addr = cur_addr->next) {
 			int position;
 
 			/* do we have a pointer here? */
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 494cd91ea39c..3c1f9aa84cf5 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1383,7 +1383,7 @@ static void smsc911x_set_multicast_list(struct net_device *dev)
 		pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_);
 		pdata->hashhi = 0;
 		pdata->hashlo = 0;
-	} else if (dev->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev)) {
 		/* Enabling specific multicast addresses */
 		unsigned int hash_high = 0;
 		unsigned int hash_low = 0;
@@ -1408,7 +1408,7 @@ static void smsc911x_set_multicast_list(struct net_device *dev)
 			}
 			mc_list = mc_list->next;
 		}
-		if (count != (unsigned int)dev->mc_count)
+		if (count != (unsigned int)netdev_mc_count(dev))
 			SMSC_WARNING(DRV, "mc_count != dev->mc_count");
 
 		pdata->hashhi = hash_high;
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 1495a5dd4b46..2bd3c986559a 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1062,7 +1062,7 @@ static void smsc9420_set_multicast_list(struct net_device *dev)
 		mac_cr &= (~MAC_CR_PRMS_);
 		mac_cr |= MAC_CR_MCPAS_;
 		mac_cr &= (~MAC_CR_HPFILT_);
-	} else if (dev->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *mc_list = dev->mc_list;
 		u32 hash_lo = 0, hash_hi = 0;
 
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index 9599ce77ef85..bd8bc66f2e00 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -541,13 +541,15 @@ static void sonic_multicast_list(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
 		rcr |= SONIC_RCR_PRO;
 	} else {
-		if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
+		if ((dev->flags & IFF_ALLMULTI) ||
+		    (netdev_mc_count(dev) > 15)) {
 			rcr |= SONIC_RCR_AMC;
 		} else {
 			if (sonic_debug > 2)
-				printk("sonic_multicast_list: mc_count %d\n", dev->mc_count);
+				printk("sonic_multicast_list: mc_count %d\n",
+				       netdev_mc_count(dev));
 			sonic_set_cam_enable(dev, 1);  /* always enable our own address */
-			for (i = 1; i <= dev->mc_count; i++) {
+			for (i = 1; i <= netdev_mc_count(dev); i++) {
 				addr = dmi->dmi_addr;
 				dmi = dmi->next;
 				sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]);
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index d0556a9b456c..58bc7ac086cf 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1796,15 +1796,15 @@ static void set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
 		rx_mode |= AcceptAll;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		rx_mode |= AcceptBroadcast|AcceptAllMulticast|PerfectFilter;
-	} else if (dev->mc_count <= 14) {
+	} else if (netdev_mc_count(dev) <= 14) {
 		/* Use the 16 element perfect filter, skip first two entries. */
 		void __iomem *filter_addr = ioaddr + PerfFilterTable + 2 * 16;
 		__be16 *eaddrs;
-		for (i = 2, mclist = dev->mc_list; mclist && i < dev->mc_count + 2;
+		for (i = 2, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev) + 2;
 		     i++, mclist = mclist->next) {
 			eaddrs = (__be16 *)mclist->dmi_addr;
 			writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 4;
@@ -1825,7 +1825,7 @@ static void set_rx_mode(struct net_device *dev)
 		__le16 mc_filter[32] __attribute__ ((aligned(sizeof(long))));	/* Multicast hash filter */
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			/* The chip uses the upper 9 CRC bits
 			   as index into the hash table */
diff --git a/drivers/net/stmmac/dwmac100.c b/drivers/net/stmmac/dwmac100.c
index ac48ed787040..576b256ee388 100644
--- a/drivers/net/stmmac/dwmac100.c
+++ b/drivers/net/stmmac/dwmac100.c
@@ -305,13 +305,13 @@ static void dwmac100_set_filter(struct net_device *dev)
 		value |= MAC_CONTROL_PR;
 		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
 			   MAC_CONTROL_HP);
-	} else if ((dev->mc_count > HASH_TABLE_SIZE)
+	} else if ((netdev_mc_count(dev) > HASH_TABLE_SIZE)
 		   || (dev->flags & IFF_ALLMULTI)) {
 		value |= MAC_CONTROL_PM;
 		value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
 		writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
 		writel(0xffffffff, ioaddr + MAC_HASH_LOW);
-	} else if (dev->mc_count == 0) {	/* no multicast */
+	} else if (netdev_mc_empty(dev)) {	/* no multicast */
 		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
 			   MAC_CONTROL_HO | MAC_CONTROL_HP);
 	} else {
@@ -327,7 +327,7 @@ static void dwmac100_set_filter(struct net_device *dev)
 
 		memset(mc_filter, 0, sizeof(mc_filter));
 		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+		     mclist && i < netdev_mc_count(dev); i++, mclist = mclist->next) {
 			/* The upper 6 bits of the calculated CRC are used to
 			 * index the contens of the hash table */
 			int bit_nr =
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
index d812e9cdb3db..90dbb4f41ef3 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -83,16 +83,16 @@ static void dwmac1000_set_filter(struct net_device *dev)
 	unsigned int value = 0;
 
 	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
-	    __func__, dev->mc_count, netdev_uc_count(dev));
+	    __func__, netdev_mc_count(dev), netdev_uc_count(dev));
 
 	if (dev->flags & IFF_PROMISC)
 		value = GMAC_FRAME_FILTER_PR;
-	else if ((dev->mc_count > HASH_TABLE_SIZE)
+	else if ((netdev_mc_count(dev) > HASH_TABLE_SIZE)
 		   || (dev->flags & IFF_ALLMULTI)) {
 		value = GMAC_FRAME_FILTER_PM;	/* pass all multi */
 		writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
 		writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
-	} else if (dev->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev)) {
 		int i;
 		u32 mc_filter[2];
 		struct dev_mc_list *mclist;
@@ -102,7 +102,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
 
 		memset(mc_filter, 0, sizeof(mc_filter));
 		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+		     mclist && i < netdev_mc_count(dev); i++, mclist = mclist->next) {
 			/* The upper 6 bits of the calculated CRC are used to
 			   index the contens of the hash table */
 			int bit_nr =
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index b447a8719427..efedc252e4be 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -414,7 +414,7 @@ static int init586(struct net_device *dev)
 	volatile struct tdr_cmd_struct *tdr_cmd;
 	volatile struct mcsetup_cmd_struct *mc_cmd;
 	struct dev_mc_list *dmi=dev->mc_list;
-	int num_addrs=dev->mc_count;
+	int num_addrs=netdev_mc_count(dev);
 
 	ptr = (void *) ((char *)p->scb + sizeof(struct scb_struct));
 
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index 0ca4241b4f63..99998862c22e 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -917,7 +917,7 @@ static void set_multicast_list( struct net_device *dev )
 		REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
 	} else {
 		short multicast_table[4];
-		int num_addrs = dev->mc_count;
+		int num_addrs = netdev_mc_count(dev);
 		int i;
 		/* We don't use the multicast table, but rely on upper-layer
 		 * filtering. */
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 25e81ebd9cd8..dfea56fa39e3 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -1013,7 +1013,7 @@ static void bigmac_set_multicast(struct net_device *dev)
 	while ((sbus_readl(bregs + BMAC_RXCFG) & BIGMAC_RXCFG_ENABLE) != 0)
 		udelay(20);
 
-	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+	if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 64)) {
 		sbus_writel(0xffff, bregs + BMAC_HTABLE0);
 		sbus_writel(0xffff, bregs + BMAC_HTABLE1);
 		sbus_writel(0xffff, bregs + BMAC_HTABLE2);
@@ -1028,7 +1028,7 @@ static void bigmac_set_multicast(struct net_device *dev)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 0c972e560cf3..4171259590b2 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1517,18 +1517,18 @@ static void set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
-	} else if (dev->mc_count) {
+	} else if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *mclist;
 		int bit;
 		int index;
 		int crc;
 		memset (mc_filter, 0, sizeof (mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			crc = ether_crc_le (ETH_ALEN, mclist->dmi_addr);
 			for (index=0, bit=0; bit < 6; bit++, crc <<= 1)
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index b55ceb88d93f..d497ec053953 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1837,7 +1837,7 @@ static u32 gem_setup_multicast(struct gem *gp)
 	int i;
 
 	if ((gp->dev->flags & IFF_ALLMULTI) ||
-	    (gp->dev->mc_count > 256)) {
+	    (netdev_mc_count(gp->dev) > 256)) {
 	    	for (i=0; i<16; i++)
 			writel(0xffff, gp->regs + MAC_HASH0 + (i << 2));
 		rxcfg |= MAC_RXCFG_HFE;
@@ -1852,7 +1852,7 @@ static u32 gem_setup_multicast(struct gem *gp)
 		for (i = 0; i < 16; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < gp->dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(gp->dev); i++) {
 			char *addrs = dmi->dmi_addr;
 
 			dmi = dmi->next;
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 76ccd31cbf50..905df35ff78a 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1516,7 +1516,7 @@ static int happy_meal_init(struct happy_meal *hp)
 
 	HMD(("htable, "));
 	if ((hp->dev->flags & IFF_ALLMULTI) ||
-	    (hp->dev->mc_count > 64)) {
+	    (netdev_mc_count(hp->dev) > 64)) {
 		hme_write32(hp, bregs + BMAC_HTABLE0, 0xffff);
 		hme_write32(hp, bregs + BMAC_HTABLE1, 0xffff);
 		hme_write32(hp, bregs + BMAC_HTABLE2, 0xffff);
@@ -1531,7 +1531,7 @@ static int happy_meal_init(struct happy_meal *hp)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < hp->dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(hp->dev); i++) {
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 
@@ -2373,7 +2373,7 @@ static void happy_meal_set_multicast(struct net_device *dev)
 
 	spin_lock_irq(&hp->happy_lock);
 
-	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+	if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 64)) {
 		hme_write32(hp, bregs + BMAC_HTABLE0, 0xffff);
 		hme_write32(hp, bregs + BMAC_HTABLE1, 0xffff);
 		hme_write32(hp, bregs + BMAC_HTABLE2, 0xffff);
@@ -2387,7 +2387,7 @@ static void happy_meal_set_multicast(struct net_device *dev)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 64e7d08c878f..cf9d5bb9e1e9 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1196,7 +1196,7 @@ static void lance_load_multicast(struct net_device *dev)
 		return;
 
 	/* Add addresses */
-	for (i = 0; i < dev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(dev); i++) {
 		addrs = dmi->dmi_addr;
 		dmi   = dmi->next;
 
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 45c383f285ee..3bc35d86ed66 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -636,7 +636,7 @@ static void qe_set_multicast(struct net_device *dev)
 	/* Lock out others. */
 	netif_stop_queue(dev);
 
-	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) {
+	if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 64)) {
 		sbus_writeb(MREGS_IACONFIG_ACHNGE | MREGS_IACONFIG_LARESET,
 			    qep->mregs + MREGS_IACONFIG);
 		while ((sbus_readb(qep->mregs + MREGS_IACONFIG) & MREGS_IACONFIG_ACHNGE) != 0)
@@ -653,7 +653,7 @@ static void qe_set_multicast(struct net_device *dev)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < dev->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(dev); i++) {
 			addrs = dmi->dmi_addr;
 			dmi = dmi->next;
 
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 033408f589fb..d838d4015c63 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1941,18 +1941,18 @@ tc35815_set_multicast_list(struct net_device *dev)
 		/* Enable promiscuous mode */
 		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
 	} else if ((dev->flags & IFF_ALLMULTI) ||
-		  dev->mc_count > CAM_ENTRY_MAX - 3) {
+		  netdev_mc_count(dev) > CAM_ENTRY_MAX - 3) {
 		/* CAM 0, 1, 20 are reserved. */
 		/* Disable promiscuous mode, use normal mode. */
 		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl);
-	} else if (dev->mc_count) {
+	} else if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *cur_addr = dev->mc_list;
 		int i;
 		int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE);
 
 		tc_writel(0, &tr->CAM_Ctl);
 		/* Walk the address list, and load the filter */
-		for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
+		for (i = 0; i < netdev_mc_count(dev); i++, cur_addr = cur_addr->next) {
 			if (!cur_addr)
 				break;
 			/* entry 0,1 is reserved. */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index b907bee31fd5..ab9b0280317e 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -808,7 +808,7 @@ static void bdx_setmulti(struct net_device *ndev)
 		/* set IMF to accept all multicast frmaes */
 		for (i = 0; i < MAC_MCST_HASH_NUM; i++)
 			WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, ~0);
-	} else if (ndev->mc_count) {
+	} else if (!netdev_mc_empty(ndev)) {
 		u8 hash;
 		struct dev_mc_list *mclist;
 		u32 reg, val;
@@ -840,7 +840,7 @@ static void bdx_setmulti(struct net_device *ndev)
 		}
 
 	} else {
-		DBG("only own mac %d\n", ndev->mc_count);
+		DBG("only own mac %d\n", netdev_mc_count(ndev));
 		rxf_val |= GMAC_RX_FILTER_AB;
 	}
 	WRITE_REG(priv, regGMAC_RXF_A, rxf_val);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 7195bdec17f3..d29282f01c23 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9430,7 +9430,7 @@ static void __tg3_set_rx_mode(struct net_device *dev)
 	} else if (dev->flags & IFF_ALLMULTI) {
 		/* Accept all multicast. */
 		tg3_set_multi (tp, 1);
-	} else if (dev->mc_count < 1) {
+	} else if (netdev_mc_empty(dev)) {
 		/* Reject all multicast. */
 		tg3_set_multi (tp, 0);
 	} else {
@@ -9442,7 +9442,7 @@ static void __tg3_set_rx_mode(struct net_device *dev)
 		u32 bit;
 		u32 crc;
 
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 
 			crc = calc_crc (mclist->dmi_addr, ETH_ALEN);
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3ec31dce99f9..e44d5a074c69 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1335,7 +1335,7 @@ static void TLan_SetMulticastList( struct net_device *dev )
 			TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
 			TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
 		} else {
-			for ( i = 0; i < dev->mc_count; i++ ) {
+			for ( i = 0; i < netdev_mc_count(dev); i++ ) {
 				if ( i < 3 ) {
 					TLan_SetMac( dev, i + 1,
 						     (char *) &dmi->dmi_addr );
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index b0d7db9d8bb4..eff68e1d107b 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -1408,7 +1408,7 @@ static void xl_set_rx_mode(struct net_device *dev)
 
 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;
 
-        for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) {
+        for (i=0,dmi=dev->mc_list;i < netdev_mc_count(dev); i++,dmi = dmi->next) {
                 dev_mc_address[0] |= dmi->dmi_addr[2] ;
                 dev_mc_address[1] |= dmi->dmi_addr[3] ;
                 dev_mc_address[2] |= dmi->dmi_addr[4] ;
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 66272f2a0758..1ce8f85a89aa 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -996,7 +996,7 @@ static void tok_set_multicast_list(struct net_device *dev)
 	if (/*BMSHELPdev->start == 0 ||*/ ti->open_status != OPEN) return;
 	address[0] = address[1] = address[2] = address[3] = 0;
 	mclist = dev->mc_list;
-	for (i = 0; i < dev->mc_count; i++) {
+	for (i = 0; i < netdev_mc_count(dev); i++) {
 		address[0] |= mclist->dmi_addr[2];
 		address[1] |= mclist->dmi_addr[3];
 		address[2] |= mclist->dmi_addr[4];
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 3f9d5a25562e..26d84daf660b 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -1303,7 +1303,7 @@ static void streamer_set_rx_mode(struct net_device *dev)
 	writel(streamer_priv->srb,streamer_mmio+LAPA);
 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; 
   
-	for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) 
+	for (i=0,dmi=dev->mc_list;i < netdev_mc_count(dev); i++,dmi = dmi->next)
 	{ 
    	        dev_mc_address[0] |= dmi->dmi_addr[2] ; 
 		dev_mc_address[1] |= dmi->dmi_addr[3] ; 
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index f010a4dc5f19..a242d125b34c 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -1178,7 +1178,7 @@ static void olympic_set_rx_mode(struct net_device *dev)
 
 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; 
 
-	for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) { 
+	for (i=0,dmi=dev->mc_list;i < netdev_mc_count(dev); i++,dmi = dmi->next) {
 		dev_mc_address[0] |= dmi->dmi_addr[2] ; 
 		dev_mc_address[1] |= dmi->dmi_addr[3] ; 
 		dev_mc_address[2] |= dmi->dmi_addr[4] ; 
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index e3c42f5ac4a9..6b8868959b85 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -1214,7 +1214,7 @@ static void tms380tr_set_multicast_list(struct net_device *dev)
 		{
 			int i;
 			struct dev_mc_list *mclist = dev->mc_list;
-			for (i=0; i< dev->mc_count; i++)
+			for (i=0; i< netdev_mc_count(dev); i++)
 			{
 				((char *)(&tp->ocpl.FunctAddr))[0] |=
 					mclist->dmi_addr[2];
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index a69c4a48bab9..f4b30c4826fb 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1184,7 +1184,7 @@ static void tsi108_set_rx_mode(struct net_device *dev)
 
 	rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE);
 
-	if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
+	if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
 		int i;
 		struct dev_mc_list *mc = dev->mc_list;
 		rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 29330209ad8b..a4cff23dcdf9 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -677,7 +677,7 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
 	memset(hash_table, 0, sizeof(hash_table));
 	set_bit_le(255, hash_table); 			/* Broadcast entry */
 	/* This should work on big-endian machines as well. */
-	for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+	for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 	     i++, mclist = mclist->next) {
 		int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
 
@@ -706,7 +706,7 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
 
 	/* We have <= 14 addresses so we can use the wonderful
 	   16 address perfect filtering of the Tulip. */
-	for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+	for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
 	     i++, mclist = mclist->next) {
 		eaddrs = (u16 *)mclist->dmi_addr;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
@@ -741,7 +741,7 @@ static void __de_set_rx_mode (struct net_device *dev)
 		goto out;
 	}
 
-	if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) {
+	if ((netdev_mc_count(dev) > 1000) || (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter well -- accept all multicasts. */
 		macmode |= AcceptAllMulticast;
 		goto out;
@@ -749,7 +749,7 @@ static void __de_set_rx_mode (struct net_device *dev)
 
 	/* Note that only the low-address shortword of setup_frame is valid!
 	   The values are doubled for big-endian architectures. */
-	if (dev->mc_count > 14)	/* Must use a multicast hash table. */
+	if (netdev_mc_count(dev) > 14)	/* Must use a multicast hash table. */
 		build_setup_frame_hash (de->setup_frame, dev);
 	else
 		build_setup_frame_perfect (de->setup_frame, dev);
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index a8349b7200b5..0b6a9731091c 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1963,10 +1963,10 @@ SetMulticastFilter(struct net_device *dev)
     omr &= ~(OMR_PR | OMR_PM);
     pa = build_setup_frame(dev, ALL);        /* Build the basic frame */
 
-    if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) {
+    if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) {
 	omr |= OMR_PM;                       /* Pass all multicasts */
     } else if (lp->setup_f == HASH_PERF) {   /* Hash Filtering */
-	for (i=0;i<dev->mc_count;i++) {      /* for each address in the list */
+	for (i = 0; i < netdev_mc_count(dev) ;i++) {
 	    addrs=dmi->dmi_addr;
 	    dmi=dmi->next;
 	    if ((*addrs & 0x01) == 1) {      /* multicast address? */
@@ -1984,7 +1984,7 @@ SetMulticastFilter(struct net_device *dev)
 	    }
 	}
     } else {                                 /* Perfect filtering */
-	for (j=0; j<dev->mc_count; j++) {
+	for (j=0; j<netdev_mc_count(dev); j++) {
 	    addrs=dmi->dmi_addr;
 	    dmi=dmi->next;
 	    for (i=0; i<ETH_ALEN; i++) {
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 5fc61c1012e5..534afbdb9c91 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -658,9 +658,9 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
 
 	/* Send setup frame */
 	if (db->chip_id == PCI_DM9132_ID)
-		dm9132_id_table(dev, dev->mc_count);	/* DM9132 */
+		dm9132_id_table(dev, netdev_mc_count(dev));	/* DM9132 */
 	else
-		send_filter_frame(dev, dev->mc_count);	/* DM9102/DM9102A */
+		send_filter_frame(dev, netdev_mc_count(dev));	/* DM9102/DM9102A */
 
 	/* Init CR7, interrupt active bit */
 	db->cr7_data = CR7_DEFAULT;
@@ -1052,6 +1052,7 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
 {
 	struct dmfe_board_info *db = netdev_priv(dev);
 	unsigned long flags;
+	int mc_count = netdev_mc_count(dev);
 
 	DMFE_DBUG(0, "dmfe_set_filter_mode()", 0);
 	spin_lock_irqsave(&db->lock, flags);
@@ -1064,19 +1065,19 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
 		return;
 	}
 
-	if (dev->flags & IFF_ALLMULTI || dev->mc_count > DMFE_MAX_MULTICAST) {
-		DMFE_DBUG(0, "Pass all multicast address", dev->mc_count);
+	if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) {
+		DMFE_DBUG(0, "Pass all multicast address", mc_count);
 		db->cr6_data &= ~(CR6_PM | CR6_PBF);
 		db->cr6_data |= CR6_PAM;
 		spin_unlock_irqrestore(&db->lock, flags);
 		return;
 	}
 
-	DMFE_DBUG(0, "Set multicast address", dev->mc_count);
+	DMFE_DBUG(0, "Set multicast address", mc_count);
 	if (db->chip_id == PCI_DM9132_ID)
-		dm9132_id_table(dev, dev->mc_count);	/* DM9132 */
+		dm9132_id_table(dev, mc_count);		/* DM9132 */
 	else
-		send_filter_frame(dev, dev->mc_count); 	/* DM9102/DM9102A */
+		send_filter_frame(dev, mc_count);	/* DM9102/DM9102A */
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index e1a5f03a49c5..cce2ada07950 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -997,7 +997,7 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
 	memset(hash_table, 0, sizeof(hash_table));
 	set_bit_le(255, hash_table); 			/* Broadcast entry */
 	/* This should work on big-endian machines as well. */
-	for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+	for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 	     i++, mclist = mclist->next) {
 		int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
 
@@ -1026,7 +1026,7 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
 
 	/* We have <= 14 addresses so we can use the wonderful
 	   16 address perfect filtering of the Tulip. */
-	for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+	for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
 	     i++, mclist = mclist->next) {
 		eaddrs = (u16 *)mclist->dmi_addr;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
@@ -1057,7 +1057,8 @@ static void set_rx_mode(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
 		csr6 |= AcceptAllMulticast | AcceptAllPhys;
-	} else if ((dev->mc_count > 1000)  ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((netdev_mc_count(dev) > 1000) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter well -- accept all multicasts. */
 		tp->csr6 |= AcceptAllMulticast;
 		csr6 |= AcceptAllMulticast;
@@ -1066,14 +1067,16 @@ static void set_rx_mode(struct net_device *dev)
 		/* Should verify correctness on big-endian/__powerpc__ */
 		struct dev_mc_list *mclist;
 		int i;
-		if (dev->mc_count > 64) {		/* Arbitrary non-effective limit. */
+		if (netdev_mc_count(dev) > 64) {
+			/* Arbitrary non-effective limit. */
 			tp->csr6 |= AcceptAllMulticast;
 			csr6 |= AcceptAllMulticast;
 		} else {
 			u32 mc_filter[2] = {0, 0};		 /* Multicast hash filter */
 			int filterbit;
-			for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
-				 i++, mclist = mclist->next) {
+			for (i = 0, mclist = dev->mc_list;
+			     mclist && i < netdev_mc_count(dev);
+			     i++, mclist = mclist->next) {
 				if (tp->flags & COMET_MAC_ADDR)
 					filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
 				else
@@ -1107,7 +1110,8 @@ static void set_rx_mode(struct net_device *dev)
 
 		/* Note that only the low-address shortword of setup_frame is valid!
 		   The values are doubled for big-endian architectures. */
-		if (dev->mc_count > 14) { /* Must use a multicast hash table. */
+		if (netdev_mc_count(dev) > 14) {
+			/* Must use a multicast hash table. */
 			build_setup_frame_hash(tp->setup_frame, dev);
 			tx_flags = 0x08400000 | 192;
 		} else {
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index dc3335d906f6..216ceb322ed4 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -557,7 +557,7 @@ static void uli526x_init(struct net_device *dev)
 	update_cr6(db->cr6_data, ioaddr);
 
 	/* Send setup frame */
-	send_filter_frame(dev, dev->mc_count);	/* M5261/M5263 */
+	send_filter_frame(dev, netdev_mc_count(dev));	/* M5261/M5263 */
 
 	/* Init CR7, interrupt active bit */
 	db->cr7_data = CR7_DEFAULT;
@@ -906,16 +906,18 @@ static void uli526x_set_filter_mode(struct net_device * dev)
 		return;
 	}
 
-	if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
-		ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
+	if (dev->flags & IFF_ALLMULTI ||
+	    netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) {
+		ULI526X_DBUG(0, "Pass all multicast address",
+			     netdev_mc_count(dev));
 		db->cr6_data &= ~(CR6_PM | CR6_PBF);
 		db->cr6_data |= CR6_PAM;
 		spin_unlock_irqrestore(&db->lock, flags);
 		return;
 	}
 
-	ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
-	send_filter_frame(dev, dev->mc_count); 	/* M5261/M5263 */
+	ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));
+	send_filter_frame(dev, netdev_mc_count(dev)); 	/* M5261/M5263 */
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 9fb89afccf7c..98711a9f35ac 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1361,7 +1361,7 @@ static u32 __set_rx_mode(struct net_device *dev)
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
 			| AcceptMyPhys;
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
@@ -1370,8 +1370,9 @@ static u32 __set_rx_mode(struct net_device *dev)
 		struct dev_mc_list *mclist;
 		int i;
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
-			 i++, mclist = mclist->next) {
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < netdev_mc_count(dev);
+		     i++, mclist = mclist->next) {
 			int filterbit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
 			filterbit &= 0x3f;
 			mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 6e4f754c4baf..edabc49a49bc 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -924,17 +924,18 @@ typhoon_set_rx_mode(struct net_device *dev)
 	filter = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
 	if(dev->flags & IFF_PROMISC) {
 		filter |= TYPHOON_RX_FILTER_PROMISCOUS;
-	} else if((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		  (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		filter |= TYPHOON_RX_FILTER_ALL_MCAST;
-	} else if(dev->mc_count) {
+	} else if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *mclist;
 		int i;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for(i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
-		    i++, mclist = mclist->next) {
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < netdev_mc_count(dev);
+		     i++, mclist = mclist->next) {
 			int bit = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
 			mc_filter[bit >> 5] |= 1 << (bit & 0x1f);
 		}
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 225f65812f2e..a05720289c7e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2031,7 +2031,8 @@ static void ucc_geth_set_multi(struct net_device *dev)
 
 			dmi = dev->mc_list;
 
-			for (i = 0; i < dev->mc_count; i++, dmi = dmi->next) {
+			for (i = 0; i < netdev_mc_count(dev);
+			     i++, dmi = dmi->next) {
 
 				/* Only support group multicast for now.
 				 */
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index a516185cbc9f..f02551713b13 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -542,9 +542,9 @@ static void asix_set_multicast(struct net_device *net)
 	if (net->flags & IFF_PROMISC) {
 		rx_ctl |= AX_RX_CTL_PRO;
 	} else if (net->flags & IFF_ALLMULTI ||
-		   net->mc_count > AX_MAX_MCAST) {
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
 		rx_ctl |= AX_RX_CTL_AMALL;
-	} else if (net->mc_count == 0) {
+	} else if (netdev_mc_empty(net)) {
 		/* just broadcast and directed */
 	} else {
 		/* We use the 20 byte dev->data
@@ -558,7 +558,7 @@ static void asix_set_multicast(struct net_device *net)
 		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
 
 		/* Build the multicast hash filter. */
-		for (i = 0; i < net->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(net); i++) {
 			crc_bits =
 			    ether_crc(ETH_ALEN,
 				      mc_list->dmi_addr) >> 26;
@@ -754,9 +754,9 @@ static void ax88172_set_multicast(struct net_device *net)
 	if (net->flags & IFF_PROMISC) {
 		rx_ctl |= 0x01;
 	} else if (net->flags & IFF_ALLMULTI ||
-		   net->mc_count > AX_MAX_MCAST) {
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
 		rx_ctl |= 0x02;
-	} else if (net->mc_count == 0) {
+	} else if (netdev_mc_empty(net)) {
 		/* just broadcast and directed */
 	} else {
 		/* We use the 20 byte dev->data
@@ -770,7 +770,7 @@ static void ax88172_set_multicast(struct net_device *net)
 		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
 
 		/* Build the multicast hash filter. */
-		for (i = 0; i < net->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(net); i++) {
 			crc_bits =
 			    ether_crc(ETH_ALEN,
 				      mc_list->dmi_addr) >> 26;
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 7d3fa06980c1..5a13660ebd17 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -648,7 +648,9 @@ static void catc_set_multicast_list(struct net_device *netdev)
 	if (netdev->flags & IFF_ALLMULTI) {
 		memset(catc->multicast, 0xff, 64);
 	} else {
-		for (i = 0, mc = netdev->mc_list; mc && i < netdev->mc_count; i++, mc = mc->next) {
+		for (i = 0, mc = netdev->mc_list;
+		     mc && i < netdev_mc_count(netdev);
+		     i++, mc = mc->next) {
 			u32 crc = ether_crc_le(6, mc->dmi_addr);
 			if (!catc->is_f5u011) {
 				catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
index 55cf7081de10..9ab5c1983a7d 100644
--- a/drivers/net/usb/int51x1.c
+++ b/drivers/net/usb/int51x1.c
@@ -139,7 +139,7 @@ static void int51x1_set_multicast(struct net_device *netdev)
 		/* do not expect to see traffic of other PLCs */
 		filter |= PACKET_TYPE_PROMISCUOUS;
 		devinfo(dev, "promiscuous mode enabled");
-	} else if (netdev->mc_count ||
+	} else if (!netdev_mc_empty(netdev) ||
 		  (netdev->flags & IFF_ALLMULTI)) {
 		filter |= PACKET_TYPE_ALL_MULTICAST;
 		devdbg(dev, "receive all multicast enabled");
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index f1d64ef67efa..52671ea043a7 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -881,7 +881,7 @@ static void kaweth_set_rx_mode(struct net_device *net)
 	if (net->flags & IFF_PROMISC) {
 		packet_filter_bitmap |= KAWETH_PACKET_FILTER_PROMISCUOUS;
 	}
-	else if ((net->mc_count) || (net->flags & IFF_ALLMULTI)) {
+	else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
 		packet_filter_bitmap |= KAWETH_PACKET_FILTER_ALL_MULTICAST;
 	}
 
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 6fc098fe9ff7..34665137f2c3 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -443,9 +443,9 @@ static void mcs7830_data_set_multicast(struct net_device *net)
 	if (net->flags & IFF_PROMISC) {
 		data->config |= HIF_REG_CONFIG_PROMISCUOUS;
 	} else if (net->flags & IFF_ALLMULTI ||
-		   net->mc_count > MCS7830_MAX_MCAST) {
+		   netdev_mc_count(net) > MCS7830_MAX_MCAST) {
 		data->config |= HIF_REG_CONFIG_ALLMULTICAST;
-	} else if (net->mc_count == 0) {
+	} else if (netdev_mc_empty(net)) {
 		/* just broadcast and directed */
 	} else {
 		/* We use the 20 byte dev->data
@@ -457,7 +457,7 @@ static void mcs7830_data_set_multicast(struct net_device *net)
 		int i;
 
 		/* Build the multicast hash filter. */
-		for (i = 0; i < net->mc_count; i++) {
+		for (i = 0; i < netdev_mc_count(net); i++) {
 			crc_bits = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
 			data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
 			mc_list = mc_list->next;
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index ed4a508ef262..44ae8f6d3135 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1232,7 +1232,7 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
 			pr_info("%s: Promiscuous mode enabled.\n", net->name);
-	} else if (net->mc_count || (net->flags & IFF_ALLMULTI)) {
+	} else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
 		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 21ac103fbb71..e85c89c6706d 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -711,7 +711,7 @@ static void rtl8150_set_multicast(struct net_device *netdev)
 	if (netdev->flags & IFF_PROMISC) {
 		dev->rx_creg |= cpu_to_le16(0x0001);
 		dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
-	} else if (netdev->mc_count ||
+	} else if (!netdev_mc_empty(netdev) ||
 		   (netdev->flags & IFF_ALLMULTI)) {
 		dev->rx_creg &= cpu_to_le16(0xfffe);
 		dev->rx_creg |= cpu_to_le16(0x0002);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 0c3c738d7419..48555d0e374d 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -384,7 +384,7 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 			devdbg(dev, "receive all multicast enabled");
 		pdata->mac_cr |= MAC_CR_MCPAS_;
 		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
-	} else if (dev->net->mc_count > 0) {
+	} else if (!netdev_mc_empty(dev->net)) {
 		struct dev_mc_list *mc_list = dev->net->mc_list;
 		int count = 0;
 
@@ -406,7 +406,7 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 			mc_list = mc_list->next;
 		}
 
-		if (count != ((u32)dev->net->mc_count))
+		if (count != ((u32) netdev_mc_count(dev->net)))
 			devwarn(dev, "mc_count != dev->mc_count");
 
 		if (netif_msg_drv(dev))
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a7e0c84426ea..85df7ac636b5 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1697,7 +1697,7 @@ static void rhine_set_rx_mode(struct net_device *dev)
 		rx_mode = 0x1C;
 		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
 		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
-	} else if ((dev->mc_count > multicast_filter_limit) ||
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
@@ -1707,7 +1707,8 @@ static void rhine_set_rx_mode(struct net_device *dev)
 		struct dev_mc_list *mclist;
 		int i;
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < netdev_mc_count(dev);
 		     i++, mclist = mclist->next) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index f15485efe40e..bdb19c3d6568 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1132,7 +1132,7 @@ static void velocity_set_multi(struct net_device *dev)
 		writel(0xffffffff, &regs->MARCAM[0]);
 		writel(0xffffffff, &regs->MARCAM[4]);
 		rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
-	} else if ((dev->mc_count > vptr->multicast_limit) ||
+	} else if ((netdev_mc_count(dev) > vptr->multicast_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
 		writel(0xffffffff, &regs->MARCAM[0]);
 		writel(0xffffffff, &regs->MARCAM[4]);
@@ -1141,7 +1141,9 @@ static void velocity_set_multi(struct net_device *dev)
 		int offset = MCAM_SIZE - vptr->multicast_limit;
 		mac_get_cam_mask(regs, vptr->mCAMmask);
 
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+		for (i = 0, mclist = dev->mc_list;
+		     mclist && i < netdev_mc_count(dev);
+		     i++, mclist = mclist->next) {
 			mac_set_cam(regs, i + offset, mclist->dmi_addr);
 			vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
 		}
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 9d8984a3741c..4c347a3df657 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -735,6 +735,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	struct dev_addr_list *addr;
 	struct netdev_hw_addr *ha;
 	int uc_count;
+	int mc_count;
 	void *buf;
 	int i;
 
@@ -762,9 +763,11 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 			 allmulti ? "en" : "dis");
 
 	uc_count = netdev_uc_count(dev);
+	mc_count = netdev_mc_count(dev);
 	/* MAC filter - use one buffer for both lists */
-	mac_data = buf = kzalloc(((uc_count + dev->mc_count) * ETH_ALEN) +
-				 (2 * sizeof(mac_data->entries)), GFP_ATOMIC);
+	buf = kzalloc(((uc_count + mc_count) * ETH_ALEN) +
+		      (2 * sizeof(mac_data->entries)), GFP_ATOMIC);
+	mac_data = buf;
 	if (!buf) {
 		dev_warn(&dev->dev, "No memory for MAC address buffer\n");
 		return;
@@ -784,13 +787,13 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	/* multicast list and count fill the end */
 	mac_data = (void *)&mac_data->macs[uc_count][0];
 
-	mac_data->entries = dev->mc_count;
+	mac_data->entries = mc_count;
 	addr = dev->mc_list;
-	for (i = 0; i < dev->mc_count; i++, addr = addr->next)
+	for (i = 0; i < mc_count; i++, addr = addr->next)
 		memcpy(&mac_data->macs[i][0], addr->da_addr, ETH_ALEN);
 
 	sg_set_buf(&sg[1], mac_data,
-		   sizeof(mac_data->entries) + (dev->mc_count * ETH_ALEN));
+		   sizeof(mac_data->entries) + (mc_count * ETH_ALEN));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
 				  VIRTIO_NET_CTRL_MAC_TABLE_SET,
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index b896f9386110..ee1b397417f3 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1668,7 +1668,7 @@ static u8 *
 vmxnet3_copy_mc(struct net_device *netdev)
 {
 	u8 *buf = NULL;
-	u32 sz = netdev->mc_count * ETH_ALEN;
+	u32 sz = netdev_mc_count(netdev) * ETH_ALEN;
 
 	/* struct Vmxnet3_RxFilterConf.mfTableLen is u16. */
 	if (sz <= 0xffff) {
@@ -1678,7 +1678,7 @@ vmxnet3_copy_mc(struct net_device *netdev)
 			int i;
 			struct dev_mc_list *mc = netdev->mc_list;
 
-			for (i = 0; i < netdev->mc_count; i++) {
+			for (i = 0; i < netdev_mc_count(netdev); i++) {
 				BUG_ON(!mc);
 				memcpy(buf + i * ETH_ALEN, mc->dmi_addr,
 				       ETH_ALEN);
@@ -1708,12 +1708,12 @@ vmxnet3_set_mc(struct net_device *netdev)
 	if (netdev->flags & IFF_ALLMULTI)
 		new_mode |= VMXNET3_RXM_ALL_MULTI;
 	else
-		if (netdev->mc_count > 0) {
+		if (!netdev_mc_empty(netdev)) {
 			new_table = vmxnet3_copy_mc(netdev);
 			if (new_table) {
 				new_mode |= VMXNET3_RXM_MCAST;
 				rxConf->mfTableLen = cpu_to_le16(
-						netdev->mc_count * ETH_ALEN);
+					netdev_mc_count(netdev) * ETH_ALEN);
 				rxConf->mfTablePA = cpu_to_le64(virt_to_phys(
 						    new_table));
 			} else {
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index a6606b8948e9..c248b01218a1 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -1178,11 +1178,11 @@ static void vxge_set_multicast(struct net_device *dev)
 
 	memset(&mac_info, 0, sizeof(struct macInfo));
 	/* Update individual M_CAST address list */
-	if ((!vdev->all_multi_flg) && dev->mc_count) {
+	if ((!vdev->all_multi_flg) && netdev_mc_count(dev)) {
 
 		mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
 		list_head = &vdev->vpaths[0].mac_addr_list;
-		if ((dev->mc_count +
+		if ((netdev_mc_count(dev) +
 			(vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) >
 				vdev->vpaths[0].max_mac_addr_cnt)
 			goto _set_all_mcast;
@@ -1217,7 +1217,7 @@ static void vxge_set_multicast(struct net_device *dev)
 		}
 
 		/* Add new ones */
-		for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
 			i++, mclist = mclist->next) {
 
 			memcpy(mac_info.macaddr, mclist->dmi_addr, ETH_ALEN);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index ef6b78da370f..c22a34c7639c 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2310,7 +2310,7 @@ static void airo_set_multicast_list(struct net_device *dev) {
 			airo_set_promisc(ai);
 	}
 
-	if ((dev->flags&IFF_ALLMULTI)||dev->mc_count>0) {
+	if ((dev->flags&IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
 		/* Turn on multicast.  (Should be already setup...) */
 	}
 }
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 753a1804eee7..a9e9cea2d767 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -1668,12 +1668,12 @@ __orinoco_set_multicast_list(struct net_device *dev)
 	/* The Hermes doesn't seem to have an allmulti mode, so we go
 	 * into promiscuous mode and let the upper levels deal. */
 	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
-	    (dev->mc_count > MAX_MULTICAST(priv))) {
+	    (netdev_mc_count(dev) > MAX_MULTICAST(priv))) {
 		promisc = 1;
 		mc_count = 0;
 	} else {
 		promisc = 0;
-		mc_count = dev->mc_count;
+		mc_count = netdev_mc_count(dev);
 	}
 
 	err = __orinoco_hw_set_multicast_list(priv, dev->mc_list, mc_count,
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88e1e4e32b22..85905cab4f16 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -1950,7 +1950,7 @@ static void set_multicast_list(struct net_device *dev)
 	if (dev->flags & IFF_ALLMULTI)
 		ray_update_multi_list(dev, 1);
 	else {
-		if (local->num_multi != dev->mc_count)
+		if (local->num_multi != netdev_mc_count(dev))
 			ray_update_multi_list(dev, 0);
 	}
 } /* end set_multicast_list */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 305c106fdc1c..14692bc51b51 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1492,10 +1492,10 @@ static void set_multicast_list(struct usbnet *usbdev)
 		filter |= RNDIS_PACKET_TYPE_PROMISCUOUS |
 			RNDIS_PACKET_TYPE_ALL_LOCAL;
 	} else if (usbdev->net->flags & IFF_ALLMULTI ||
-		   usbdev->net->mc_count > priv->multicast_size) {
+		   netdev_mc_count(usbdev->net) > priv->multicast_size) {
 		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
-	} else if (usbdev->net->mc_count > 0) {
-		size = min(priv->multicast_size, usbdev->net->mc_count);
+	} else if (!netdev_mc_empty(usbdev->net)) {
+		size = min(priv->multicast_size, netdev_mc_count(usbdev->net));
 		buf = kmalloc(size * ETH_ALEN, GFP_KERNEL);
 		if (!buf) {
 			devwarn(usbdev,
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 33c8be7ec8e6..5d2b52f4717f 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -879,16 +879,15 @@ static void zd1201_set_multicast(struct net_device *dev)
 	unsigned char reqbuf[ETH_ALEN*ZD1201_MAXMULTI];
 	int i;
 
-	if (dev->mc_count > ZD1201_MAXMULTI)
+	if (netdev_mc_count(dev) > ZD1201_MAXMULTI)
 		return;
 
-	for (i=0; i<dev->mc_count; i++) {
+	for (i=0; i<netdev_mc_count(dev); i++) {
 		memcpy(reqbuf+i*ETH_ALEN, mc->dmi_addr, ETH_ALEN);
 		mc = mc->next;
 	}
 	zd1201_setconfig(zd, ZD1201_RID_CNFGROUPADDRESS, reqbuf,
-	    dev->mc_count*ETH_ALEN, 0);
-	
+			 netdev_mc_count(dev) * ETH_ALEN, 0);
 }
 
 static int zd1201_config_commit(struct net_device *dev, 
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 8b231b30fd12..5c880240a642 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -1301,15 +1301,16 @@ static void set_rx_mode(struct net_device *dev)
 	iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		iowrite16(0x000F, ioaddr + AddrMode);
-	} else if ((dev->mc_count > 64)  ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((netdev_mc_count(dev) > 64) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter well, or accept all multicasts. */
 		iowrite16(0x000B, ioaddr + AddrMode);
-	} else if (dev->mc_count > 0) { /* Must use the multicast hash table. */
+	} else if (!netdev_mc_empty(dev)) { /* Must use the multicast hash table. */
 		struct dev_mc_list *mclist;
 		u16 hash_table[4];
 		int i;
 		memset(hash_table, 0, sizeof(hash_table));
-		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
 			 i++, mclist = mclist->next) {
 			unsigned int bit;
 
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 24d97b4fa6fb..bc1fad248952 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -444,11 +444,11 @@ void et131x_multicast(struct net_device *netdev)
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
 	}
 
-	if (netdev->mc_count > NIC_MAX_MCAST_LIST) {
+	if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST) {
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
 	}
 
-	if (netdev->mc_count < 1) {
+	if (netdev_mc_count(netdev) < 1) {
 		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
 		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
 	} else {
@@ -456,10 +456,10 @@ void et131x_multicast(struct net_device *netdev)
 	}
 
 	/* Set values in the private adapter struct */
-	adapter->MCAddressCount = netdev->mc_count;
+	adapter->MCAddressCount = netdev_mc_count(netdev);
 
-	if (netdev->mc_count) {
-		count = netdev->mc_count - 1;
+	if (!netdev_mc_empty(netdev)) {
+		count = netdev_mc_count(netdev) - 1;
 		memcpy(adapter->MCList[count], mclist->dmi_addr, ETH_ALEN);
 	}
 
diff --git a/drivers/staging/netwave/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c
index e61e6b9440ab..e936717d1f4b 100644
--- a/drivers/staging/netwave/netwave_cs.c
+++ b/drivers/staging/netwave/netwave_cs.c
@@ -1341,15 +1341,15 @@ static void set_multicast_list(struct net_device *dev)
 #ifdef PCMCIA_DEBUG
     {
 	xstatic int old;
-	if (old != dev->mc_count) {
-	    old = dev->mc_count;
+	if (old != netdev_mc_count(dev)) {
+	    old = netdev_mc_count(dev);
 	    pr_debug("%s: setting Rx mode to %d addresses.\n",
-		  dev->name, dev->mc_count);
+		  dev->name, netdev_mc_count(dev));
 	}
     }
 #endif
 	
-    if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
+    if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) {
 	/* Multicast Mode */
 	rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
     } else if (dev->flags & IFF_PROMISC) {
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 5b191afc1442..8c9d5e5c7702 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -1365,7 +1365,7 @@ static void slic_mcast_set_list(struct net_device *dev)
 	int i;
 	char *addresses;
 	struct dev_mc_list *mc_list = dev->mc_list;
-	int mc_count = dev->mc_count;
+	int mc_count = netdev_mc_count(dev);
 
 	ASSERT(adapter);
 
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index 0db8d7b6e79c..82b3a6e0b15a 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -3093,7 +3093,7 @@ static void device_set_multi(struct net_device *dev) {
         /* Unconditionally log net taps. */
         pDevice->byRxMode |= (RCR_MULTICAST|RCR_BROADCAST|RCR_UNICAST);
     }
-    else if ((dev->mc_count > pDevice->multicast_limit)
+    else if ((netdev_mc_count(dev) > pDevice->multicast_limit)
         ||  (dev->flags & IFF_ALLMULTI)) {
         MACvSelectPage1(pDevice->PortOffset);
         VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, 0xffffffff);
@@ -3103,7 +3103,7 @@ static void device_set_multi(struct net_device *dev) {
     }
     else {
         memset(mc_filter, 0, sizeof(mc_filter));
-        for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+        for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
              i++, mclist = mclist->next) {
             int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
             mc_filter[bit_nr >> 5] |= cpu_to_le32(1 << (bit_nr & 31));
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index ef17c4958c67..2c6a5350547c 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1619,7 +1619,8 @@ static void device_set_multi(struct net_device *dev) {
         // Unconditionally log net taps.
         pDevice->byRxMode |= (RCR_MULTICAST|RCR_BROADCAST|RCR_UNICAST);
     }
-    else if ((dev->mc_count > pDevice->multicast_limit) || (dev->flags & IFF_ALLMULTI)) {
+    else if ((netdev_mc_count(dev) > pDevice->multicast_limit) ||
+	     (dev->flags & IFF_ALLMULTI)) {
         CONTROLnsRequestOut(pDevice,
                             MESSAGE_TYPE_WRITE,
                             MAC_REG_MAR0,
@@ -1631,7 +1632,7 @@ static void device_set_multi(struct net_device *dev) {
     }
     else {
         memset(mc_filter, 0, sizeof(mc_filter));
-        for (ii = 0, mclist = dev->mc_list; mclist && ii < dev->mc_count;
+        for (ii = 0, mclist = dev->mc_list; mclist && ii < netdev_mc_count(dev);
              ii++, mclist = mclist->next) {
             int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
             mc_filter[bit_nr >> 5] |= cpu_to_le32(1 << (bit_nr & 31));
diff --git a/drivers/staging/wavelan/wavelan.c b/drivers/staging/wavelan/wavelan.c
index d634b2da3b84..961f1417fb58 100644
--- a/drivers/staging/wavelan/wavelan.c
+++ b/drivers/staging/wavelan/wavelan.c
@@ -1367,7 +1367,7 @@ static void wavelan_set_multicast_list(struct net_device * dev)
 #ifdef DEBUG_IOCTL_INFO
 	printk(KERN_DEBUG
 	       "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
-	       dev->name, dev->flags, dev->mc_count);
+	       dev->name, dev->flags, netdev_mc_count(dev));
 #endif
 
 	/* Are we asking for promiscuous mode,
@@ -1375,7 +1375,7 @@ static void wavelan_set_multicast_list(struct net_device * dev)
 	 * or too many multicast addresses for the hardware filter? */
 	if ((dev->flags & IFF_PROMISC) ||
 	    (dev->flags & IFF_ALLMULTI) ||
-	    (dev->mc_count > I82586_MAX_MULTICAST_ADDRESSES)) {
+	    (netdev_mc_count(dev) > I82586_MAX_MULTICAST_ADDRESSES)) {
 		/*
 		 * Enable promiscuous mode: receive all packets.
 		 */
@@ -1393,11 +1393,11 @@ static void wavelan_set_multicast_list(struct net_device * dev)
 		 * in multicast list
 		 */
 #ifdef MULTICAST_AVOID
-		if (lp->promiscuous || (dev->mc_count != lp->mc_count))
+		if (lp->promiscuous || (netdev_mc_count(dev) != lp->mc_count))
 #endif
 		{
 			lp->promiscuous = 0;
-			lp->mc_count = dev->mc_count;
+			lp->mc_count = netdev_mc_count(dev);
 
 			wv_82586_reconfig(dev);
 		}
diff --git a/drivers/staging/wavelan/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c
index 10c702b5be4a..08fcb226d7d6 100644
--- a/drivers/staging/wavelan/wavelan_cs.c
+++ b/drivers/staging/wavelan/wavelan_cs.c
@@ -1373,7 +1373,7 @@ wavelan_set_multicast_list(struct net_device *	dev)
 
 #ifdef DEBUG_IOCTL_INFO
   printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
-	 dev->name, dev->flags, dev->mc_count);
+	 dev->name, dev->flags, netdev_mc_count(dev));
 #endif
 
   if(dev->flags & IFF_PROMISC)
@@ -1394,7 +1394,7 @@ wavelan_set_multicast_list(struct net_device *	dev)
     /* If all multicast addresses
      * or too much multicast addresses for the hardware filter */
     if((dev->flags & IFF_ALLMULTI) ||
-       (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
+       (netdev_mc_count(dev) > I82593_MAX_MULTICAST_ADDRESSES))
       {
 	/*
 	 * Disable promiscuous mode, but active the all multicast mode
@@ -1418,12 +1418,12 @@ wavelan_set_multicast_list(struct net_device *	dev)
 	   */
 #ifdef MULTICAST_AVOID
 	  if(lp->promiscuous || lp->allmulticast ||
-	     (dev->mc_count != lp->mc_count))
+	     (netdev_mc_count(dev) != lp->mc_count))
 #endif
 	    {
 	      lp->promiscuous = 0;
 	      lp->allmulticast = 0;
-	      lp->mc_count = dev->mc_count;
+	      lp->mc_count = netdev_mc_count(dev);
 
 	      wv_82593_reconfig(dev);
 	    }
@@ -3622,7 +3622,8 @@ wv_82593_config(struct net_device *	dev)
       if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
 		       OP0_MC_SETUP, SR0_MC_SETUP_DONE))
 	ret = FALSE;
-      lp->mc_count = dev->mc_count;	/* remember to avoid repeated reset */
+      /* remember to avoid repeated reset */
+      lp->mc_count = netdev_mc_count(dev);
     }
 
   /* Job done, clear the flag */
diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c
index 0d22e3692fe5..a95ebf881fcd 100644
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -1070,9 +1070,9 @@ void wl_multicast( struct net_device *dev )
             ( dev->flags & IFF_MULTICAST ) ? "Multicast " : "",
             ( dev->flags & IFF_ALLMULTI ) ? "All-Multicast" : "" );
 
-        DBG_PRINT( "  mc_count: %d\n", dev->mc_count );
+        DBG_PRINT( "  mc_count: %d\n", netdev_mc_count(dev));
 
-        for( x = 0, mclist = dev->mc_list; mclist && x < dev->mc_count;
+        for( x = 0, mclist = dev->mc_list; mclist && x < netdev_mc_count(dev);
              x++, mclist = mclist->next ) {
             DBG_PRINT( "    %s (%d)\n", DbgHwAddr(mclist->dmi_addr),
                        mclist->dmi_addrlen );
@@ -1103,7 +1103,7 @@ void wl_multicast( struct net_device *dev )
                 DBG_PRINT( "Enabling Promiscuous mode (IFF_PROMISC)\n" );
                 hcf_put_info( &( lp->hcfCtx ), (LTVP)&( lp->ltvRecord ));
             }
-            else if(( dev->mc_count > HCF_MAX_MULTICAST ) ||
+            else if ((netdev_mc_count(dev) > HCF_MAX_MULTICAST) ||
                     ( dev->flags & IFF_ALLMULTI )) {
                 /* Shutting off this filter will enable all multicast frames to
                    be sent up from the device; however, this is a static RID, so
@@ -1115,13 +1115,13 @@ void wl_multicast( struct net_device *dev )
                 hcf_put_info( &( lp->hcfCtx ), (LTVP)&( lp->ltvRecord ));
                 wl_apply( lp );
             }
-            else if( dev->mc_count != 0 ) {
+            else if (!netdev_mc_empty(dev)) {
                 /* Set the multicast addresses */
-                lp->ltvRecord.len = ( dev->mc_count * 3 ) + 1;
+                lp->ltvRecord.len = ( netdev_mc_count(dev) * 3 ) + 1;
                 lp->ltvRecord.typ = CFG_GROUP_ADDR;
 
                 for( x = 0, mclist = dev->mc_list;
-                ( x < dev->mc_count ) && ( mclist != NULL );
+                ( x < netdev_mc_count(dev)) && ( mclist != NULL );
                     x++, mclist = mclist->next ) {
                     memcpy( &( lp->ltvRecord.u.u8[x * ETH_ALEN] ),
                             mclist->dmi_addr, ETH_ALEN );
diff --git a/net/bluetooth/bnep/netdev.c b/net/bluetooth/bnep/netdev.c
index 26fb831ef7e0..b6234b73c4cf 100644
--- a/net/bluetooth/bnep/netdev.c
+++ b/net/bluetooth/bnep/netdev.c
@@ -64,7 +64,7 @@ static void bnep_net_set_mc_list(struct net_device *dev)
 	struct sk_buff *skb;
 	int size;
 
-	BT_DBG("%s mc_count %d", dev->name, dev->mc_count);
+	BT_DBG("%s mc_count %d", dev->name, netdev_mc_count(dev));
 
 	size = sizeof(*r) + (BNEP_MAX_MULTICAST_FILTERS + 1) * ETH_ALEN * 2;
 	skb  = alloc_skb(size, GFP_ATOMIC);
@@ -97,7 +97,9 @@ static void bnep_net_set_mc_list(struct net_device *dev)
 
 		/* FIXME: We should group addresses here. */
 
-		for (i = 0; i < dev->mc_count && i < BNEP_MAX_MULTICAST_FILTERS; i++) {
+		for (i = 0;
+		     i < netdev_mc_count(dev) && i < BNEP_MAX_MULTICAST_FILTERS;
+		     i++) {
 			memcpy(__skb_put(skb, ETH_ALEN), dmi->dmi_addr, ETH_ALEN);
 			memcpy(__skb_put(skb, ETH_ALEN), dmi->dmi_addr, ETH_ALEN);
 			dmi = dmi->next;
diff --git a/net/core/dev.c b/net/core/dev.c
index ae75f25ac0a5..d1cf53d0d597 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4263,7 +4263,7 @@ static void dev_addr_discard(struct net_device *dev)
 	netif_addr_lock_bh(dev);
 
 	__dev_addr_discard(&dev->mc_list);
-	dev->mc_count = 0;
+	netdev_mc_count(dev) = 0;
 
 	netif_addr_unlock_bh(dev);
 }
diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c
index d340110f5c0c..9616c32d1076 100644
--- a/net/irda/irlan/irlan_eth.c
+++ b/net/irda/irlan/irlan_eth.c
@@ -321,14 +321,15 @@ static void irlan_eth_set_multicast_list(struct net_device *dev)
 		/* Enable promiscuous mode */
 		IRDA_WARNING("Promiscuous mode not implemented by IrLAN!\n");
 	}
-	else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS) {
+	else if ((dev->flags & IFF_ALLMULTI) ||
+		 netdev_mc_count(dev) > HW_MAX_ADDRS) {
 		/* Disable promiscuous mode, use normal mode. */
 		IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __func__ );
 		/* hardware_set_filter(NULL); */
 
 		irlan_set_multicast_filter(self, TRUE);
 	}
-	else if (dev->mc_count) {
+	else if (!netdev_mc_empty(dev)) {
 		IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __func__ );
 		/* Walk the address list, and load the filter */
 		/* hardware_set_filter(dev->mc_list); */
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 09fff4662e80..f943f5fa7286 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -413,7 +413,7 @@ static int ieee80211_stop(struct net_device *dev)
 	netif_addr_lock_bh(dev);
 	spin_lock_bh(&local->filter_lock);
 	__dev_addr_unsync(&local->mc_list, &local->mc_count,
-			  &dev->mc_list, &dev->mc_count);
+			  &dev->mc_list, dev->mc_count);
 	spin_unlock_bh(&local->filter_lock);
 	netif_addr_unlock_bh(dev);
 
-- 
cgit v1.2.3


From 7455a76f170f794498d26081a5f15b797ef1a2aa Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Mon, 8 Feb 2010 05:12:08 +0000
Subject: macb: straighten out macb_mii_probe function

Use "phy_find_first" instead of manual lookup. Also use "phy_connect_direct"
instead of "phy_connect" since we already have phy_device pointer here.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macb.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index fbc371fa19b5..7a5f89728a81 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -189,18 +189,11 @@ static void macb_handle_link_change(struct net_device *dev)
 static int macb_mii_probe(struct net_device *dev)
 {
 	struct macb *bp = netdev_priv(dev);
-	struct phy_device *phydev = NULL;
+	struct phy_device *phydev;
 	struct eth_platform_data *pdata;
-	int phy_addr;
-
-	/* find the first phy */
-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-		if (bp->mii_bus->phy_map[phy_addr]) {
-			phydev = bp->mii_bus->phy_map[phy_addr];
-			break;
-		}
-	}
+	int ret;
 
+	phydev = phy_find_first(bp->mii_bus);
 	if (!phydev) {
 		printk (KERN_ERR "%s: no PHY found\n", dev->name);
 		return -1;
@@ -210,17 +203,13 @@ static int macb_mii_probe(struct net_device *dev)
 	/* TODO : add pin_irq */
 
 	/* attach the mac to the phy */
-	if (pdata && pdata->is_rmii) {
-		phydev = phy_connect(dev, dev_name(&phydev->dev),
-			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
-	} else {
-		phydev = phy_connect(dev, dev_name(&phydev->dev),
-			&macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
-	}
-
-	if (IS_ERR(phydev)) {
+	ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
+				 pdata && pdata->is_rmii ?
+				 PHY_INTERFACE_MODE_RMII :
+				 PHY_INTERFACE_MODE_MII);
+	if (ret) {
 		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
+		return ret;
 	}
 
 	/* mask with MAC supported features */
-- 
cgit v1.2.3


From 447d8c2603a417cca68240059fbf1babfd27774f Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri, 12 Feb 2010 12:10:47 -0800
Subject: net: move am79c961's probe function to .devinit.text
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A pointer to am79c961_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/arm/am79c961a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 164b37e85eea..1c3c1f94268e 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -680,7 +680,7 @@ static const struct net_device_ops am79c961_netdev_ops = {
 #endif
 };
 
-static int __init am79c961_probe(struct platform_device *pdev)
+static int __devinit am79c961_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct net_device *dev;
-- 
cgit v1.2.3


From 8ca86fd83eae6c73db5f6b23ee3a63b77d52c8ee Mon Sep 17 00:00:00 2001
From: Tristram Ha <Tristram.Ha@micrel.com>
Date: Mon, 8 Feb 2010 11:36:53 +0000
Subject: net: Micrel KSZ8841/2 PCI Ethernet driver

This is a new network driver for Micrel KSZ8841/KSZ8842 PCI Ethernet chips.  The same driver can run both chips at the same time.  It supports IPv4 TCP hardware checksumming and so can use scatter/gather transmission.

The KSZ8842 switch has 2 ports.  Some users like to take direct control of those ports.  So KSZ8842 has a multiple devices mode in which the driver creates another network device so that users can specify which port to send packets.  This mode is enabled by passing the "multi_dev=1" parameter to the driver during loading.

The KSZ884X can receive huge frames with size up to 1916 bytes.  To use this feature change the network device MTU from 1500 to 1898.

The KSZ884X driver has 3 packet receive processing functions for the normal mode, multiple devices mode, and huge frame mode.  Those functions are identical except for more checking for the new features.  In normal programming point of view the huge frame version is the one to use because it covers all the cases, but this is done for performance consideration because the target clients for the KSZ884X chips are embedded systems, which unlike desktop PC may not have powerful CPU.

Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ksz884x.c | 7335 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 7335 insertions(+)
 create mode 100644 drivers/net/ksz884x.c

(limited to 'drivers/net')

diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
new file mode 100644
index 000000000000..6f187c7e61fa
--- /dev/null
+++ b/drivers/net/ksz884x.c
@@ -0,0 +1,7335 @@
+/**
+ * drivers/net/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver
+ *
+ * Copyright (c) 2009-2010 Micrel, Inc.
+ * 	Tristram Ha <Tristram.Ha@micrel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/sched.h>
+
+
+/* DMA Registers */
+
+#define KS_DMA_TX_CTRL			0x0000
+#define DMA_TX_ENABLE			0x00000001
+#define DMA_TX_CRC_ENABLE		0x00000002
+#define DMA_TX_PAD_ENABLE		0x00000004
+#define DMA_TX_LOOPBACK			0x00000100
+#define DMA_TX_FLOW_ENABLE		0x00000200
+#define DMA_TX_CSUM_IP			0x00010000
+#define DMA_TX_CSUM_TCP			0x00020000
+#define DMA_TX_CSUM_UDP			0x00040000
+#define DMA_TX_BURST_SIZE		0x3F000000
+
+#define KS_DMA_RX_CTRL			0x0004
+#define DMA_RX_ENABLE			0x00000001
+#define KS884X_DMA_RX_MULTICAST		0x00000002
+#define DMA_RX_PROMISCUOUS		0x00000004
+#define DMA_RX_ERROR			0x00000008
+#define DMA_RX_UNICAST			0x00000010
+#define DMA_RX_ALL_MULTICAST		0x00000020
+#define DMA_RX_BROADCAST		0x00000040
+#define DMA_RX_FLOW_ENABLE		0x00000200
+#define DMA_RX_CSUM_IP			0x00010000
+#define DMA_RX_CSUM_TCP			0x00020000
+#define DMA_RX_CSUM_UDP			0x00040000
+#define DMA_RX_BURST_SIZE		0x3F000000
+
+#define DMA_BURST_SHIFT			24
+#define DMA_BURST_DEFAULT		8
+
+#define KS_DMA_TX_START			0x0008
+#define KS_DMA_RX_START			0x000C
+#define DMA_START			0x00000001
+
+#define KS_DMA_TX_ADDR			0x0010
+#define KS_DMA_RX_ADDR			0x0014
+
+#define DMA_ADDR_LIST_MASK		0xFFFFFFFC
+#define DMA_ADDR_LIST_SHIFT		2
+
+/* MTR0 */
+#define KS884X_MULTICAST_0_OFFSET	0x0020
+#define KS884X_MULTICAST_1_OFFSET	0x0021
+#define KS884X_MULTICAST_2_OFFSET	0x0022
+#define KS884x_MULTICAST_3_OFFSET	0x0023
+/* MTR1 */
+#define KS884X_MULTICAST_4_OFFSET	0x0024
+#define KS884X_MULTICAST_5_OFFSET	0x0025
+#define KS884X_MULTICAST_6_OFFSET	0x0026
+#define KS884X_MULTICAST_7_OFFSET	0x0027
+
+/* Interrupt Registers */
+
+/* INTEN */
+#define KS884X_INTERRUPTS_ENABLE	0x0028
+/* INTST */
+#define KS884X_INTERRUPTS_STATUS	0x002C
+
+#define KS884X_INT_RX_STOPPED		0x02000000
+#define KS884X_INT_TX_STOPPED		0x04000000
+#define KS884X_INT_RX_OVERRUN		0x08000000
+#define KS884X_INT_TX_EMPTY		0x10000000
+#define KS884X_INT_RX			0x20000000
+#define KS884X_INT_TX			0x40000000
+#define KS884X_INT_PHY			0x80000000
+
+#define KS884X_INT_RX_MASK		\
+	(KS884X_INT_RX | KS884X_INT_RX_OVERRUN)
+#define KS884X_INT_TX_MASK		\
+	(KS884X_INT_TX | KS884X_INT_TX_EMPTY)
+#define KS884X_INT_MASK	(KS884X_INT_RX | KS884X_INT_TX | KS884X_INT_PHY)
+
+/* MAC Additional Station Address */
+
+/* MAAL0 */
+#define KS_ADD_ADDR_0_LO		0x0080
+/* MAAH0 */
+#define KS_ADD_ADDR_0_HI		0x0084
+/* MAAL1 */
+#define KS_ADD_ADDR_1_LO		0x0088
+/* MAAH1 */
+#define KS_ADD_ADDR_1_HI		0x008C
+/* MAAL2 */
+#define KS_ADD_ADDR_2_LO		0x0090
+/* MAAH2 */
+#define KS_ADD_ADDR_2_HI		0x0094
+/* MAAL3 */
+#define KS_ADD_ADDR_3_LO		0x0098
+/* MAAH3 */
+#define KS_ADD_ADDR_3_HI		0x009C
+/* MAAL4 */
+#define KS_ADD_ADDR_4_LO		0x00A0
+/* MAAH4 */
+#define KS_ADD_ADDR_4_HI		0x00A4
+/* MAAL5 */
+#define KS_ADD_ADDR_5_LO		0x00A8
+/* MAAH5 */
+#define KS_ADD_ADDR_5_HI		0x00AC
+/* MAAL6 */
+#define KS_ADD_ADDR_6_LO		0x00B0
+/* MAAH6 */
+#define KS_ADD_ADDR_6_HI		0x00B4
+/* MAAL7 */
+#define KS_ADD_ADDR_7_LO		0x00B8
+/* MAAH7 */
+#define KS_ADD_ADDR_7_HI		0x00BC
+/* MAAL8 */
+#define KS_ADD_ADDR_8_LO		0x00C0
+/* MAAH8 */
+#define KS_ADD_ADDR_8_HI		0x00C4
+/* MAAL9 */
+#define KS_ADD_ADDR_9_LO		0x00C8
+/* MAAH9 */
+#define KS_ADD_ADDR_9_HI		0x00CC
+/* MAAL10 */
+#define KS_ADD_ADDR_A_LO		0x00D0
+/* MAAH10 */
+#define KS_ADD_ADDR_A_HI		0x00D4
+/* MAAL11 */
+#define KS_ADD_ADDR_B_LO		0x00D8
+/* MAAH11 */
+#define KS_ADD_ADDR_B_HI		0x00DC
+/* MAAL12 */
+#define KS_ADD_ADDR_C_LO		0x00E0
+/* MAAH12 */
+#define KS_ADD_ADDR_C_HI		0x00E4
+/* MAAL13 */
+#define KS_ADD_ADDR_D_LO		0x00E8
+/* MAAH13 */
+#define KS_ADD_ADDR_D_HI		0x00EC
+/* MAAL14 */
+#define KS_ADD_ADDR_E_LO		0x00F0
+/* MAAH14 */
+#define KS_ADD_ADDR_E_HI		0x00F4
+/* MAAL15 */
+#define KS_ADD_ADDR_F_LO		0x00F8
+/* MAAH15 */
+#define KS_ADD_ADDR_F_HI		0x00FC
+
+#define ADD_ADDR_HI_MASK		0x0000FFFF
+#define ADD_ADDR_ENABLE			0x80000000
+#define ADD_ADDR_INCR			8
+
+/* Miscellaneous Registers */
+
+/* MARL */
+#define KS884X_ADDR_0_OFFSET		0x0200
+#define KS884X_ADDR_1_OFFSET		0x0201
+/* MARM */
+#define KS884X_ADDR_2_OFFSET		0x0202
+#define KS884X_ADDR_3_OFFSET		0x0203
+/* MARH */
+#define KS884X_ADDR_4_OFFSET		0x0204
+#define KS884X_ADDR_5_OFFSET		0x0205
+
+/* OBCR */
+#define KS884X_BUS_CTRL_OFFSET		0x0210
+
+#define BUS_SPEED_125_MHZ		0x0000
+#define BUS_SPEED_62_5_MHZ		0x0001
+#define BUS_SPEED_41_66_MHZ		0x0002
+#define BUS_SPEED_25_MHZ		0x0003
+
+/* EEPCR */
+#define KS884X_EEPROM_CTRL_OFFSET	0x0212
+
+#define EEPROM_CHIP_SELECT		0x0001
+#define EEPROM_SERIAL_CLOCK		0x0002
+#define EEPROM_DATA_OUT			0x0004
+#define EEPROM_DATA_IN			0x0008
+#define EEPROM_ACCESS_ENABLE		0x0010
+
+/* MBIR */
+#define KS884X_MEM_INFO_OFFSET		0x0214
+
+#define RX_MEM_TEST_FAILED		0x0008
+#define RX_MEM_TEST_FINISHED		0x0010
+#define TX_MEM_TEST_FAILED		0x0800
+#define TX_MEM_TEST_FINISHED		0x1000
+
+/* GCR */
+#define KS884X_GLOBAL_CTRL_OFFSET	0x0216
+#define GLOBAL_SOFTWARE_RESET		0x0001
+
+#define KS8841_POWER_MANAGE_OFFSET	0x0218
+
+/* WFCR */
+#define KS8841_WOL_CTRL_OFFSET		0x021A
+#define KS8841_WOL_MAGIC_ENABLE		0x0080
+#define KS8841_WOL_FRAME3_ENABLE	0x0008
+#define KS8841_WOL_FRAME2_ENABLE	0x0004
+#define KS8841_WOL_FRAME1_ENABLE	0x0002
+#define KS8841_WOL_FRAME0_ENABLE	0x0001
+
+/* WF0 */
+#define KS8841_WOL_FRAME_CRC_OFFSET	0x0220
+#define KS8841_WOL_FRAME_BYTE0_OFFSET	0x0224
+#define KS8841_WOL_FRAME_BYTE2_OFFSET	0x0228
+
+/* IACR */
+#define KS884X_IACR_P			0x04A0
+#define KS884X_IACR_OFFSET		KS884X_IACR_P
+
+/* IADR1 */
+#define KS884X_IADR1_P			0x04A2
+#define KS884X_IADR2_P			0x04A4
+#define KS884X_IADR3_P			0x04A6
+#define KS884X_IADR4_P			0x04A8
+#define KS884X_IADR5_P			0x04AA
+
+#define KS884X_ACC_CTRL_SEL_OFFSET	KS884X_IACR_P
+#define KS884X_ACC_CTRL_INDEX_OFFSET	(KS884X_ACC_CTRL_SEL_OFFSET + 1)
+
+#define KS884X_ACC_DATA_0_OFFSET	KS884X_IADR4_P
+#define KS884X_ACC_DATA_1_OFFSET	(KS884X_ACC_DATA_0_OFFSET + 1)
+#define KS884X_ACC_DATA_2_OFFSET	KS884X_IADR5_P
+#define KS884X_ACC_DATA_3_OFFSET	(KS884X_ACC_DATA_2_OFFSET + 1)
+#define KS884X_ACC_DATA_4_OFFSET	KS884X_IADR2_P
+#define KS884X_ACC_DATA_5_OFFSET	(KS884X_ACC_DATA_4_OFFSET + 1)
+#define KS884X_ACC_DATA_6_OFFSET	KS884X_IADR3_P
+#define KS884X_ACC_DATA_7_OFFSET	(KS884X_ACC_DATA_6_OFFSET + 1)
+#define KS884X_ACC_DATA_8_OFFSET	KS884X_IADR1_P
+
+/* P1MBCR */
+#define KS884X_P1MBCR_P			0x04D0
+#define KS884X_P1MBSR_P			0x04D2
+#define KS884X_PHY1ILR_P		0x04D4
+#define KS884X_PHY1IHR_P		0x04D6
+#define KS884X_P1ANAR_P			0x04D8
+#define KS884X_P1ANLPR_P		0x04DA
+
+/* P2MBCR */
+#define KS884X_P2MBCR_P			0x04E0
+#define KS884X_P2MBSR_P			0x04E2
+#define KS884X_PHY2ILR_P		0x04E4
+#define KS884X_PHY2IHR_P		0x04E6
+#define KS884X_P2ANAR_P			0x04E8
+#define KS884X_P2ANLPR_P		0x04EA
+
+#define KS884X_PHY_1_CTRL_OFFSET	KS884X_P1MBCR_P
+#define PHY_CTRL_INTERVAL		(KS884X_P2MBCR_P - KS884X_P1MBCR_P)
+
+#define KS884X_PHY_CTRL_OFFSET		0x00
+
+/* Mode Control Register */
+#define PHY_REG_CTRL			0
+
+#define PHY_RESET			0x8000
+#define PHY_LOOPBACK			0x4000
+#define PHY_SPEED_100MBIT		0x2000
+#define PHY_AUTO_NEG_ENABLE		0x1000
+#define PHY_POWER_DOWN			0x0800
+#define PHY_MII_DISABLE			0x0400
+#define PHY_AUTO_NEG_RESTART		0x0200
+#define PHY_FULL_DUPLEX			0x0100
+#define PHY_COLLISION_TEST		0x0080
+#define PHY_HP_MDIX			0x0020
+#define PHY_FORCE_MDIX			0x0010
+#define PHY_AUTO_MDIX_DISABLE		0x0008
+#define PHY_REMOTE_FAULT_DISABLE	0x0004
+#define PHY_TRANSMIT_DISABLE		0x0002
+#define PHY_LED_DISABLE			0x0001
+
+#define KS884X_PHY_STATUS_OFFSET	0x02
+
+/* Mode Status Register */
+#define PHY_REG_STATUS			1
+
+#define PHY_100BT4_CAPABLE		0x8000
+#define PHY_100BTX_FD_CAPABLE		0x4000
+#define PHY_100BTX_CAPABLE		0x2000
+#define PHY_10BT_FD_CAPABLE		0x1000
+#define PHY_10BT_CAPABLE		0x0800
+#define PHY_MII_SUPPRESS_CAPABLE	0x0040
+#define PHY_AUTO_NEG_ACKNOWLEDGE	0x0020
+#define PHY_REMOTE_FAULT		0x0010
+#define PHY_AUTO_NEG_CAPABLE		0x0008
+#define PHY_LINK_STATUS			0x0004
+#define PHY_JABBER_DETECT		0x0002
+#define PHY_EXTENDED_CAPABILITY		0x0001
+
+#define KS884X_PHY_ID_1_OFFSET		0x04
+#define KS884X_PHY_ID_2_OFFSET		0x06
+
+/* PHY Identifier Registers */
+#define PHY_REG_ID_1			2
+#define PHY_REG_ID_2			3
+
+#define KS884X_PHY_AUTO_NEG_OFFSET	0x08
+
+/* Auto-Negotiation Advertisement Register */
+#define PHY_REG_AUTO_NEGOTIATION	4
+
+#define PHY_AUTO_NEG_NEXT_PAGE		0x8000
+#define PHY_AUTO_NEG_REMOTE_FAULT	0x2000
+/* Not supported. */
+#define PHY_AUTO_NEG_ASYM_PAUSE		0x0800
+#define PHY_AUTO_NEG_SYM_PAUSE		0x0400
+#define PHY_AUTO_NEG_100BT4		0x0200
+#define PHY_AUTO_NEG_100BTX_FD		0x0100
+#define PHY_AUTO_NEG_100BTX		0x0080
+#define PHY_AUTO_NEG_10BT_FD		0x0040
+#define PHY_AUTO_NEG_10BT		0x0020
+#define PHY_AUTO_NEG_SELECTOR		0x001F
+#define PHY_AUTO_NEG_802_3		0x0001
+
+#define PHY_AUTO_NEG_PAUSE  (PHY_AUTO_NEG_SYM_PAUSE | PHY_AUTO_NEG_ASYM_PAUSE)
+
+#define KS884X_PHY_REMOTE_CAP_OFFSET	0x0A
+
+/* Auto-Negotiation Link Partner Ability Register */
+#define PHY_REG_REMOTE_CAPABILITY	5
+
+#define PHY_REMOTE_NEXT_PAGE		0x8000
+#define PHY_REMOTE_ACKNOWLEDGE		0x4000
+#define PHY_REMOTE_REMOTE_FAULT		0x2000
+#define PHY_REMOTE_SYM_PAUSE		0x0400
+#define PHY_REMOTE_100BTX_FD		0x0100
+#define PHY_REMOTE_100BTX		0x0080
+#define PHY_REMOTE_10BT_FD		0x0040
+#define PHY_REMOTE_10BT			0x0020
+
+/* P1VCT */
+#define KS884X_P1VCT_P			0x04F0
+#define KS884X_P1PHYCTRL_P		0x04F2
+
+/* P2VCT */
+#define KS884X_P2VCT_P			0x04F4
+#define KS884X_P2PHYCTRL_P		0x04F6
+
+#define KS884X_PHY_SPECIAL_OFFSET	KS884X_P1VCT_P
+#define PHY_SPECIAL_INTERVAL		(KS884X_P2VCT_P - KS884X_P1VCT_P)
+
+#define KS884X_PHY_LINK_MD_OFFSET	0x00
+
+#define PHY_START_CABLE_DIAG		0x8000
+#define PHY_CABLE_DIAG_RESULT		0x6000
+#define PHY_CABLE_STAT_NORMAL		0x0000
+#define PHY_CABLE_STAT_OPEN		0x2000
+#define PHY_CABLE_STAT_SHORT		0x4000
+#define PHY_CABLE_STAT_FAILED		0x6000
+#define PHY_CABLE_10M_SHORT		0x1000
+#define PHY_CABLE_FAULT_COUNTER		0x01FF
+
+#define KS884X_PHY_PHY_CTRL_OFFSET	0x02
+
+#define PHY_STAT_REVERSED_POLARITY	0x0020
+#define PHY_STAT_MDIX			0x0010
+#define PHY_FORCE_LINK			0x0008
+#define PHY_POWER_SAVING_DISABLE	0x0004
+#define PHY_REMOTE_LOOPBACK		0x0002
+
+/* SIDER */
+#define KS884X_SIDER_P			0x0400
+#define KS884X_CHIP_ID_OFFSET		KS884X_SIDER_P
+#define KS884X_FAMILY_ID_OFFSET		(KS884X_CHIP_ID_OFFSET + 1)
+
+#define REG_FAMILY_ID			0x88
+
+#define REG_CHIP_ID_41			0x8810
+#define REG_CHIP_ID_42			0x8800
+
+#define KS884X_CHIP_ID_MASK_41		0xFF10
+#define KS884X_CHIP_ID_MASK		0xFFF0
+#define KS884X_CHIP_ID_SHIFT		4
+#define KS884X_REVISION_MASK		0x000E
+#define KS884X_REVISION_SHIFT		1
+#define KS8842_START			0x0001
+
+#define CHIP_IP_41_M			0x8810
+#define CHIP_IP_42_M			0x8800
+#define CHIP_IP_61_M			0x8890
+#define CHIP_IP_62_M			0x8880
+
+#define CHIP_IP_41_P			0x8850
+#define CHIP_IP_42_P			0x8840
+#define CHIP_IP_61_P			0x88D0
+#define CHIP_IP_62_P			0x88C0
+
+/* SGCR1 */
+#define KS8842_SGCR1_P			0x0402
+#define KS8842_SWITCH_CTRL_1_OFFSET	KS8842_SGCR1_P
+
+#define SWITCH_PASS_ALL			0x8000
+#define SWITCH_TX_FLOW_CTRL		0x2000
+#define SWITCH_RX_FLOW_CTRL		0x1000
+#define SWITCH_CHECK_LENGTH		0x0800
+#define SWITCH_AGING_ENABLE		0x0400
+#define SWITCH_FAST_AGING		0x0200
+#define SWITCH_AGGR_BACKOFF		0x0100
+#define SWITCH_PASS_PAUSE		0x0008
+#define SWITCH_LINK_AUTO_AGING		0x0001
+
+/* SGCR2 */
+#define KS8842_SGCR2_P			0x0404
+#define KS8842_SWITCH_CTRL_2_OFFSET	KS8842_SGCR2_P
+
+#define SWITCH_VLAN_ENABLE		0x8000
+#define SWITCH_IGMP_SNOOP		0x4000
+#define IPV6_MLD_SNOOP_ENABLE		0x2000
+#define IPV6_MLD_SNOOP_OPTION		0x1000
+#define PRIORITY_SCHEME_SELECT		0x0800
+#define SWITCH_MIRROR_RX_TX		0x0100
+#define UNICAST_VLAN_BOUNDARY		0x0080
+#define MULTICAST_STORM_DISABLE		0x0040
+#define SWITCH_BACK_PRESSURE		0x0020
+#define FAIR_FLOW_CTRL			0x0010
+#define NO_EXC_COLLISION_DROP		0x0008
+#define SWITCH_HUGE_PACKET		0x0004
+#define SWITCH_LEGAL_PACKET		0x0002
+#define SWITCH_BUF_RESERVE		0x0001
+
+/* SGCR3 */
+#define KS8842_SGCR3_P			0x0406
+#define KS8842_SWITCH_CTRL_3_OFFSET	KS8842_SGCR3_P
+
+#define BROADCAST_STORM_RATE_LO		0xFF00
+#define SWITCH_REPEATER			0x0080
+#define SWITCH_HALF_DUPLEX		0x0040
+#define SWITCH_FLOW_CTRL		0x0020
+#define SWITCH_10_MBIT			0x0010
+#define SWITCH_REPLACE_NULL_VID		0x0008
+#define BROADCAST_STORM_RATE_HI		0x0007
+
+#define BROADCAST_STORM_RATE		0x07FF
+
+/* SGCR4 */
+#define KS8842_SGCR4_P			0x0408
+
+/* SGCR5 */
+#define KS8842_SGCR5_P			0x040A
+#define KS8842_SWITCH_CTRL_5_OFFSET	KS8842_SGCR5_P
+
+#define LED_MODE			0x8200
+#define LED_SPEED_DUPLEX_ACT		0x0000
+#define LED_SPEED_DUPLEX_LINK_ACT	0x8000
+#define LED_DUPLEX_10_100		0x0200
+
+/* SGCR6 */
+#define KS8842_SGCR6_P			0x0410
+#define KS8842_SWITCH_CTRL_6_OFFSET	KS8842_SGCR6_P
+
+#define KS8842_PRIORITY_MASK		3
+#define KS8842_PRIORITY_SHIFT		2
+
+/* SGCR7 */
+#define KS8842_SGCR7_P			0x0412
+#define KS8842_SWITCH_CTRL_7_OFFSET	KS8842_SGCR7_P
+
+#define SWITCH_UNK_DEF_PORT_ENABLE	0x0008
+#define SWITCH_UNK_DEF_PORT_3		0x0004
+#define SWITCH_UNK_DEF_PORT_2		0x0002
+#define SWITCH_UNK_DEF_PORT_1		0x0001
+
+/* MACAR1 */
+#define KS8842_MACAR1_P			0x0470
+#define KS8842_MACAR2_P			0x0472
+#define KS8842_MACAR3_P			0x0474
+#define KS8842_MAC_ADDR_1_OFFSET	KS8842_MACAR1_P
+#define KS8842_MAC_ADDR_0_OFFSET	(KS8842_MAC_ADDR_1_OFFSET + 1)
+#define KS8842_MAC_ADDR_3_OFFSET	KS8842_MACAR2_P
+#define KS8842_MAC_ADDR_2_OFFSET	(KS8842_MAC_ADDR_3_OFFSET + 1)
+#define KS8842_MAC_ADDR_5_OFFSET	KS8842_MACAR3_P
+#define KS8842_MAC_ADDR_4_OFFSET	(KS8842_MAC_ADDR_5_OFFSET + 1)
+
+/* TOSR1 */
+#define KS8842_TOSR1_P			0x0480
+#define KS8842_TOSR2_P			0x0482
+#define KS8842_TOSR3_P			0x0484
+#define KS8842_TOSR4_P			0x0486
+#define KS8842_TOSR5_P			0x0488
+#define KS8842_TOSR6_P			0x048A
+#define KS8842_TOSR7_P			0x0490
+#define KS8842_TOSR8_P			0x0492
+#define KS8842_TOS_1_OFFSET		KS8842_TOSR1_P
+#define KS8842_TOS_2_OFFSET		KS8842_TOSR2_P
+#define KS8842_TOS_3_OFFSET		KS8842_TOSR3_P
+#define KS8842_TOS_4_OFFSET		KS8842_TOSR4_P
+#define KS8842_TOS_5_OFFSET		KS8842_TOSR5_P
+#define KS8842_TOS_6_OFFSET		KS8842_TOSR6_P
+
+#define KS8842_TOS_7_OFFSET		KS8842_TOSR7_P
+#define KS8842_TOS_8_OFFSET		KS8842_TOSR8_P
+
+/* P1CR1 */
+#define KS8842_P1CR1_P			0x0500
+#define KS8842_P1CR2_P			0x0502
+#define KS8842_P1VIDR_P			0x0504
+#define KS8842_P1CR3_P			0x0506
+#define KS8842_P1IRCR_P			0x0508
+#define KS8842_P1ERCR_P			0x050A
+#define KS884X_P1SCSLMD_P		0x0510
+#define KS884X_P1CR4_P			0x0512
+#define KS884X_P1SR_P			0x0514
+
+/* P2CR1 */
+#define KS8842_P2CR1_P			0x0520
+#define KS8842_P2CR2_P			0x0522
+#define KS8842_P2VIDR_P			0x0524
+#define KS8842_P2CR3_P			0x0526
+#define KS8842_P2IRCR_P			0x0528
+#define KS8842_P2ERCR_P			0x052A
+#define KS884X_P2SCSLMD_P		0x0530
+#define KS884X_P2CR4_P			0x0532
+#define KS884X_P2SR_P			0x0534
+
+/* P3CR1 */
+#define KS8842_P3CR1_P			0x0540
+#define KS8842_P3CR2_P			0x0542
+#define KS8842_P3VIDR_P			0x0544
+#define KS8842_P3CR3_P			0x0546
+#define KS8842_P3IRCR_P			0x0548
+#define KS8842_P3ERCR_P			0x054A
+
+#define KS8842_PORT_1_CTRL_1		KS8842_P1CR1_P
+#define KS8842_PORT_2_CTRL_1		KS8842_P2CR1_P
+#define KS8842_PORT_3_CTRL_1		KS8842_P3CR1_P
+
+#define PORT_CTRL_ADDR(port, addr)		\
+	(addr = KS8842_PORT_1_CTRL_1 + (port) *	\
+		(KS8842_PORT_2_CTRL_1 - KS8842_PORT_1_CTRL_1))
+
+#define KS8842_PORT_CTRL_1_OFFSET	0x00
+
+#define PORT_BROADCAST_STORM		0x0080
+#define PORT_DIFFSERV_ENABLE		0x0040
+#define PORT_802_1P_ENABLE		0x0020
+#define PORT_BASED_PRIORITY_MASK	0x0018
+#define PORT_BASED_PRIORITY_BASE	0x0003
+#define PORT_BASED_PRIORITY_SHIFT	3
+#define PORT_BASED_PRIORITY_0		0x0000
+#define PORT_BASED_PRIORITY_1		0x0008
+#define PORT_BASED_PRIORITY_2		0x0010
+#define PORT_BASED_PRIORITY_3		0x0018
+#define PORT_INSERT_TAG			0x0004
+#define PORT_REMOVE_TAG			0x0002
+#define PORT_PRIO_QUEUE_ENABLE		0x0001
+
+#define KS8842_PORT_CTRL_2_OFFSET	0x02
+
+#define PORT_INGRESS_VLAN_FILTER	0x4000
+#define PORT_DISCARD_NON_VID		0x2000
+#define PORT_FORCE_FLOW_CTRL		0x1000
+#define PORT_BACK_PRESSURE		0x0800
+#define PORT_TX_ENABLE			0x0400
+#define PORT_RX_ENABLE			0x0200
+#define PORT_LEARN_DISABLE		0x0100
+#define PORT_MIRROR_SNIFFER		0x0080
+#define PORT_MIRROR_RX			0x0040
+#define PORT_MIRROR_TX			0x0020
+#define PORT_USER_PRIORITY_CEILING	0x0008
+#define PORT_VLAN_MEMBERSHIP		0x0007
+
+#define KS8842_PORT_CTRL_VID_OFFSET	0x04
+
+#define PORT_DEFAULT_VID		0x0001
+
+#define KS8842_PORT_CTRL_3_OFFSET	0x06
+
+#define PORT_INGRESS_LIMIT_MODE		0x000C
+#define PORT_INGRESS_ALL		0x0000
+#define PORT_INGRESS_UNICAST		0x0004
+#define PORT_INGRESS_MULTICAST		0x0008
+#define PORT_INGRESS_BROADCAST		0x000C
+#define PORT_COUNT_IFG			0x0002
+#define PORT_COUNT_PREAMBLE		0x0001
+
+#define KS8842_PORT_IN_RATE_OFFSET	0x08
+#define KS8842_PORT_OUT_RATE_OFFSET	0x0A
+
+#define PORT_PRIORITY_RATE		0x0F
+#define PORT_PRIORITY_RATE_SHIFT	4
+
+#define KS884X_PORT_LINK_MD		0x10
+
+#define PORT_CABLE_10M_SHORT		0x8000
+#define PORT_CABLE_DIAG_RESULT		0x6000
+#define PORT_CABLE_STAT_NORMAL		0x0000
+#define PORT_CABLE_STAT_OPEN		0x2000
+#define PORT_CABLE_STAT_SHORT		0x4000
+#define PORT_CABLE_STAT_FAILED		0x6000
+#define PORT_START_CABLE_DIAG		0x1000
+#define PORT_FORCE_LINK			0x0800
+#define PORT_POWER_SAVING_DISABLE	0x0400
+#define PORT_PHY_REMOTE_LOOPBACK	0x0200
+#define PORT_CABLE_FAULT_COUNTER	0x01FF
+
+#define KS884X_PORT_CTRL_4_OFFSET	0x12
+
+#define PORT_LED_OFF			0x8000
+#define PORT_TX_DISABLE			0x4000
+#define PORT_AUTO_NEG_RESTART		0x2000
+#define PORT_REMOTE_FAULT_DISABLE	0x1000
+#define PORT_POWER_DOWN			0x0800
+#define PORT_AUTO_MDIX_DISABLE		0x0400
+#define PORT_FORCE_MDIX			0x0200
+#define PORT_LOOPBACK			0x0100
+#define PORT_AUTO_NEG_ENABLE		0x0080
+#define PORT_FORCE_100_MBIT		0x0040
+#define PORT_FORCE_FULL_DUPLEX		0x0020
+#define PORT_AUTO_NEG_SYM_PAUSE		0x0010
+#define PORT_AUTO_NEG_100BTX_FD		0x0008
+#define PORT_AUTO_NEG_100BTX		0x0004
+#define PORT_AUTO_NEG_10BT_FD		0x0002
+#define PORT_AUTO_NEG_10BT		0x0001
+
+#define KS884X_PORT_STATUS_OFFSET	0x14
+
+#define PORT_HP_MDIX			0x8000
+#define PORT_REVERSED_POLARITY		0x2000
+#define PORT_RX_FLOW_CTRL		0x0800
+#define PORT_TX_FLOW_CTRL		0x1000
+#define PORT_STATUS_SPEED_100MBIT	0x0400
+#define PORT_STATUS_FULL_DUPLEX		0x0200
+#define PORT_REMOTE_FAULT		0x0100
+#define PORT_MDIX_STATUS		0x0080
+#define PORT_AUTO_NEG_COMPLETE		0x0040
+#define PORT_STATUS_LINK_GOOD		0x0020
+#define PORT_REMOTE_SYM_PAUSE		0x0010
+#define PORT_REMOTE_100BTX_FD		0x0008
+#define PORT_REMOTE_100BTX		0x0004
+#define PORT_REMOTE_10BT_FD		0x0002
+#define PORT_REMOTE_10BT		0x0001
+
+/*
+#define STATIC_MAC_TABLE_ADDR		00-0000FFFF-FFFFFFFF
+#define STATIC_MAC_TABLE_FWD_PORTS	00-00070000-00000000
+#define STATIC_MAC_TABLE_VALID		00-00080000-00000000
+#define STATIC_MAC_TABLE_OVERRIDE	00-00100000-00000000
+#define STATIC_MAC_TABLE_USE_FID	00-00200000-00000000
+#define STATIC_MAC_TABLE_FID		00-03C00000-00000000
+*/
+
+#define STATIC_MAC_TABLE_ADDR		0x0000FFFF
+#define STATIC_MAC_TABLE_FWD_PORTS	0x00070000
+#define STATIC_MAC_TABLE_VALID		0x00080000
+#define STATIC_MAC_TABLE_OVERRIDE	0x00100000
+#define STATIC_MAC_TABLE_USE_FID	0x00200000
+#define STATIC_MAC_TABLE_FID		0x03C00000
+
+#define STATIC_MAC_FWD_PORTS_SHIFT	16
+#define STATIC_MAC_FID_SHIFT		22
+
+/*
+#define VLAN_TABLE_VID			00-00000000-00000FFF
+#define VLAN_TABLE_FID			00-00000000-0000F000
+#define VLAN_TABLE_MEMBERSHIP		00-00000000-00070000
+#define VLAN_TABLE_VALID		00-00000000-00080000
+*/
+
+#define VLAN_TABLE_VID			0x00000FFF
+#define VLAN_TABLE_FID			0x0000F000
+#define VLAN_TABLE_MEMBERSHIP		0x00070000
+#define VLAN_TABLE_VALID		0x00080000
+
+#define VLAN_TABLE_FID_SHIFT		12
+#define VLAN_TABLE_MEMBERSHIP_SHIFT	16
+
+/*
+#define DYNAMIC_MAC_TABLE_ADDR		00-0000FFFF-FFFFFFFF
+#define DYNAMIC_MAC_TABLE_FID		00-000F0000-00000000
+#define DYNAMIC_MAC_TABLE_SRC_PORT	00-00300000-00000000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP	00-00C00000-00000000
+#define DYNAMIC_MAC_TABLE_ENTRIES	03-FF000000-00000000
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY	04-00000000-00000000
+#define DYNAMIC_MAC_TABLE_RESERVED	78-00000000-00000000
+#define DYNAMIC_MAC_TABLE_NOT_READY	80-00000000-00000000
+*/
+
+#define DYNAMIC_MAC_TABLE_ADDR		0x0000FFFF
+#define DYNAMIC_MAC_TABLE_FID		0x000F0000
+#define DYNAMIC_MAC_TABLE_SRC_PORT	0x00300000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP	0x00C00000
+#define DYNAMIC_MAC_TABLE_ENTRIES	0xFF000000
+
+#define DYNAMIC_MAC_TABLE_ENTRIES_H	0x03
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY	0x04
+#define DYNAMIC_MAC_TABLE_RESERVED	0x78
+#define DYNAMIC_MAC_TABLE_NOT_READY	0x80
+
+#define DYNAMIC_MAC_FID_SHIFT		16
+#define DYNAMIC_MAC_SRC_PORT_SHIFT	20
+#define DYNAMIC_MAC_TIMESTAMP_SHIFT	22
+#define DYNAMIC_MAC_ENTRIES_SHIFT	24
+#define DYNAMIC_MAC_ENTRIES_H_SHIFT	8
+
+/*
+#define MIB_COUNTER_VALUE		00-00000000-3FFFFFFF
+#define MIB_COUNTER_VALID		00-00000000-40000000
+#define MIB_COUNTER_OVERFLOW		00-00000000-80000000
+*/
+
+#define MIB_COUNTER_VALUE		0x3FFFFFFF
+#define MIB_COUNTER_VALID		0x40000000
+#define MIB_COUNTER_OVERFLOW		0x80000000
+
+#define MIB_PACKET_DROPPED		0x0000FFFF
+
+#define KS_MIB_PACKET_DROPPED_TX_0	0x100
+#define KS_MIB_PACKET_DROPPED_TX_1	0x101
+#define KS_MIB_PACKET_DROPPED_TX	0x102
+#define KS_MIB_PACKET_DROPPED_RX_0	0x103
+#define KS_MIB_PACKET_DROPPED_RX_1	0x104
+#define KS_MIB_PACKET_DROPPED_RX	0x105
+
+/* Change default LED mode. */
+#define SET_DEFAULT_LED			LED_SPEED_DUPLEX_ACT
+
+#define MAC_ADDR_LEN			6
+#define MAC_ADDR_ORDER(i)		(MAC_ADDR_LEN - 1 - (i))
+
+#define MAX_ETHERNET_BODY_SIZE		1500
+#define ETHERNET_HEADER_SIZE		14
+
+#define MAX_ETHERNET_PACKET_SIZE	\
+	(MAX_ETHERNET_BODY_SIZE + ETHERNET_HEADER_SIZE)
+
+#define REGULAR_RX_BUF_SIZE		(MAX_ETHERNET_PACKET_SIZE + 4)
+#define MAX_RX_BUF_SIZE			(1912 + 4)
+
+#define ADDITIONAL_ENTRIES		16
+#define MAX_MULTICAST_LIST		32
+
+#define HW_MULTICAST_SIZE		8
+
+#define HW_TO_DEV_PORT(port)		(port - 1)
+
+enum {
+	media_connected,
+	media_disconnected
+};
+
+enum {
+	OID_COUNTER_UNKOWN,
+
+	OID_COUNTER_FIRST,
+
+	/* total transmit errors */
+	OID_COUNTER_XMIT_ERROR,
+
+	/* total receive errors */
+	OID_COUNTER_RCV_ERROR,
+
+	OID_COUNTER_LAST
+};
+
+/*
+ * Hardware descriptor definitions
+ */
+
+#define DESC_ALIGNMENT			16
+#define BUFFER_ALIGNMENT		8
+
+#define NUM_OF_RX_DESC			64
+#define NUM_OF_TX_DESC			64
+
+#define KS_DESC_RX_FRAME_LEN		0x000007FF
+#define KS_DESC_RX_FRAME_TYPE		0x00008000
+#define KS_DESC_RX_ERROR_CRC		0x00010000
+#define KS_DESC_RX_ERROR_RUNT		0x00020000
+#define KS_DESC_RX_ERROR_TOO_LONG	0x00040000
+#define KS_DESC_RX_ERROR_PHY		0x00080000
+#define KS884X_DESC_RX_PORT_MASK	0x00300000
+#define KS_DESC_RX_MULTICAST		0x01000000
+#define KS_DESC_RX_ERROR		0x02000000
+#define KS_DESC_RX_ERROR_CSUM_UDP	0x04000000
+#define KS_DESC_RX_ERROR_CSUM_TCP	0x08000000
+#define KS_DESC_RX_ERROR_CSUM_IP	0x10000000
+#define KS_DESC_RX_LAST			0x20000000
+#define KS_DESC_RX_FIRST		0x40000000
+#define KS_DESC_RX_ERROR_COND		\
+	(KS_DESC_RX_ERROR_CRC |		\
+	KS_DESC_RX_ERROR_RUNT |		\
+	KS_DESC_RX_ERROR_PHY |		\
+	KS_DESC_RX_ERROR_TOO_LONG)
+
+#define KS_DESC_HW_OWNED		0x80000000
+
+#define KS_DESC_BUF_SIZE		0x000007FF
+#define KS884X_DESC_TX_PORT_MASK	0x00300000
+#define KS_DESC_END_OF_RING		0x02000000
+#define KS_DESC_TX_CSUM_GEN_UDP		0x04000000
+#define KS_DESC_TX_CSUM_GEN_TCP		0x08000000
+#define KS_DESC_TX_CSUM_GEN_IP		0x10000000
+#define KS_DESC_TX_LAST			0x20000000
+#define KS_DESC_TX_FIRST		0x40000000
+#define KS_DESC_TX_INTERRUPT		0x80000000
+
+#define KS_DESC_PORT_SHIFT		20
+
+#define KS_DESC_RX_MASK			(KS_DESC_BUF_SIZE)
+
+#define KS_DESC_TX_MASK			\
+	(KS_DESC_TX_INTERRUPT |		\
+	KS_DESC_TX_FIRST |		\
+	KS_DESC_TX_LAST |		\
+	KS_DESC_TX_CSUM_GEN_IP |	\
+	KS_DESC_TX_CSUM_GEN_TCP |	\
+	KS_DESC_TX_CSUM_GEN_UDP |	\
+	KS_DESC_BUF_SIZE)
+
+struct ksz_desc_rx_stat {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32 hw_owned:1;
+	u32 first_desc:1;
+	u32 last_desc:1;
+	u32 csum_err_ip:1;
+	u32 csum_err_tcp:1;
+	u32 csum_err_udp:1;
+	u32 error:1;
+	u32 multicast:1;
+	u32 src_port:4;
+	u32 err_phy:1;
+	u32 err_too_long:1;
+	u32 err_runt:1;
+	u32 err_crc:1;
+	u32 frame_type:1;
+	u32 reserved1:4;
+	u32 frame_len:11;
+#else
+	u32 frame_len:11;
+	u32 reserved1:4;
+	u32 frame_type:1;
+	u32 err_crc:1;
+	u32 err_runt:1;
+	u32 err_too_long:1;
+	u32 err_phy:1;
+	u32 src_port:4;
+	u32 multicast:1;
+	u32 error:1;
+	u32 csum_err_udp:1;
+	u32 csum_err_tcp:1;
+	u32 csum_err_ip:1;
+	u32 last_desc:1;
+	u32 first_desc:1;
+	u32 hw_owned:1;
+#endif
+};
+
+struct ksz_desc_tx_stat {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32 hw_owned:1;
+	u32 reserved1:31;
+#else
+	u32 reserved1:31;
+	u32 hw_owned:1;
+#endif
+};
+
+struct ksz_desc_rx_buf {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32 reserved4:6;
+	u32 end_of_ring:1;
+	u32 reserved3:14;
+	u32 buf_size:11;
+#else
+	u32 buf_size:11;
+	u32 reserved3:14;
+	u32 end_of_ring:1;
+	u32 reserved4:6;
+#endif
+};
+
+struct ksz_desc_tx_buf {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32 intr:1;
+	u32 first_seg:1;
+	u32 last_seg:1;
+	u32 csum_gen_ip:1;
+	u32 csum_gen_tcp:1;
+	u32 csum_gen_udp:1;
+	u32 end_of_ring:1;
+	u32 reserved4:1;
+	u32 dest_port:4;
+	u32 reserved3:9;
+	u32 buf_size:11;
+#else
+	u32 buf_size:11;
+	u32 reserved3:9;
+	u32 dest_port:4;
+	u32 reserved4:1;
+	u32 end_of_ring:1;
+	u32 csum_gen_udp:1;
+	u32 csum_gen_tcp:1;
+	u32 csum_gen_ip:1;
+	u32 last_seg:1;
+	u32 first_seg:1;
+	u32 intr:1;
+#endif
+};
+
+union desc_stat {
+	struct ksz_desc_rx_stat rx;
+	struct ksz_desc_tx_stat tx;
+	u32 data;
+};
+
+union desc_buf {
+	struct ksz_desc_rx_buf rx;
+	struct ksz_desc_tx_buf tx;
+	u32 data;
+};
+
+/**
+ * struct ksz_hw_desc - Hardware descriptor data structure
+ * @ctrl:	Descriptor control value.
+ * @buf:	Descriptor buffer value.
+ * @addr:	Physical address of memory buffer.
+ * @next:	Pointer to next hardware descriptor.
+ */
+struct ksz_hw_desc {
+	union desc_stat ctrl;
+	union desc_buf buf;
+	u32 addr;
+	u32 next;
+};
+
+/**
+ * struct ksz_sw_desc - Software descriptor data structure
+ * @ctrl:	Descriptor control value.
+ * @buf:	Descriptor buffer value.
+ * @buf_size:	Current buffers size value in hardware descriptor.
+ */
+struct ksz_sw_desc {
+	union desc_stat ctrl;
+	union desc_buf buf;
+	u32 buf_size;
+};
+
+/**
+ * struct ksz_dma_buf - OS dependent DMA buffer data structure
+ * @skb:	Associated socket buffer.
+ * @dma:	Associated physical DMA address.
+ * len:		Actual len used.
+ */
+struct ksz_dma_buf {
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	int len;
+};
+
+/**
+ * struct ksz_desc - Descriptor structure
+ * @phw:	Hardware descriptor pointer to uncached physical memory.
+ * @sw:		Cached memory to hold hardware descriptor values for
+ * 		manipulation.
+ * @dma_buf:	Operating system dependent data structure to hold physical
+ * 		memory buffer allocation information.
+ */
+struct ksz_desc {
+	struct ksz_hw_desc *phw;
+	struct ksz_sw_desc sw;
+	struct ksz_dma_buf dma_buf;
+};
+
+#define DMA_BUFFER(desc)  ((struct ksz_dma_buf *)(&(desc)->dma_buf))
+
+/**
+ * struct ksz_desc_info - Descriptor information data structure
+ * @ring:	First descriptor in the ring.
+ * @cur:	Current descriptor being manipulated.
+ * @ring_virt:	First hardware descriptor in the ring.
+ * @ring_phys:	The physical address of the first descriptor of the ring.
+ * @size:	Size of hardware descriptor.
+ * @alloc:	Number of descriptors allocated.
+ * @avail:	Number of descriptors available for use.
+ * @last:	Index for last descriptor released to hardware.
+ * @next:	Index for next descriptor available for use.
+ * @mask:	Mask for index wrapping.
+ */
+struct ksz_desc_info {
+	struct ksz_desc *ring;
+	struct ksz_desc *cur;
+	struct ksz_hw_desc *ring_virt;
+	u32 ring_phys;
+	int size;
+	int alloc;
+	int avail;
+	int last;
+	int next;
+	int mask;
+};
+
+/*
+ * KSZ8842 switch definitions
+ */
+
+enum {
+	TABLE_STATIC_MAC = 0,
+	TABLE_VLAN,
+	TABLE_DYNAMIC_MAC,
+	TABLE_MIB
+};
+
+#define LEARNED_MAC_TABLE_ENTRIES	1024
+#define STATIC_MAC_TABLE_ENTRIES	8
+
+/**
+ * struct ksz_mac_table - Static MAC table data structure
+ * @mac_addr:	MAC address to filter.
+ * @vid:	VID value.
+ * @fid:	FID value.
+ * @ports:	Port membership.
+ * @override:	Override setting.
+ * @use_fid:	FID use setting.
+ * @valid:	Valid setting indicating the entry is being used.
+ */
+struct ksz_mac_table {
+	u8 mac_addr[MAC_ADDR_LEN];
+	u16 vid;
+	u8 fid;
+	u8 ports;
+	u8 override:1;
+	u8 use_fid:1;
+	u8 valid:1;
+};
+
+#define VLAN_TABLE_ENTRIES		16
+
+/**
+ * struct ksz_vlan_table - VLAN table data structure
+ * @vid:	VID value.
+ * @fid:	FID value.
+ * @member:	Port membership.
+ */
+struct ksz_vlan_table {
+	u16 vid;
+	u8 fid;
+	u8 member;
+};
+
+#define DIFFSERV_ENTRIES		64
+#define PRIO_802_1P_ENTRIES		8
+#define PRIO_QUEUES			4
+
+#define SWITCH_PORT_NUM			2
+#define TOTAL_PORT_NUM			(SWITCH_PORT_NUM + 1)
+#define HOST_MASK			(1 << SWITCH_PORT_NUM)
+#define PORT_MASK			7
+
+#define MAIN_PORT			0
+#define OTHER_PORT			1
+#define HOST_PORT			SWITCH_PORT_NUM
+
+#define PORT_COUNTER_NUM		0x20
+#define TOTAL_PORT_COUNTER_NUM		(PORT_COUNTER_NUM + 2)
+
+#define MIB_COUNTER_RX_LO_PRIORITY	0x00
+#define MIB_COUNTER_RX_HI_PRIORITY	0x01
+#define MIB_COUNTER_RX_UNDERSIZE	0x02
+#define MIB_COUNTER_RX_FRAGMENT		0x03
+#define MIB_COUNTER_RX_OVERSIZE		0x04
+#define MIB_COUNTER_RX_JABBER		0x05
+#define MIB_COUNTER_RX_SYMBOL_ERR	0x06
+#define MIB_COUNTER_RX_CRC_ERR		0x07
+#define MIB_COUNTER_RX_ALIGNMENT_ERR	0x08
+#define MIB_COUNTER_RX_CTRL_8808	0x09
+#define MIB_COUNTER_RX_PAUSE		0x0A
+#define MIB_COUNTER_RX_BROADCAST	0x0B
+#define MIB_COUNTER_RX_MULTICAST	0x0C
+#define MIB_COUNTER_RX_UNICAST		0x0D
+#define MIB_COUNTER_RX_OCTET_64		0x0E
+#define MIB_COUNTER_RX_OCTET_65_127	0x0F
+#define MIB_COUNTER_RX_OCTET_128_255	0x10
+#define MIB_COUNTER_RX_OCTET_256_511	0x11
+#define MIB_COUNTER_RX_OCTET_512_1023	0x12
+#define MIB_COUNTER_RX_OCTET_1024_1522	0x13
+#define MIB_COUNTER_TX_LO_PRIORITY	0x14
+#define MIB_COUNTER_TX_HI_PRIORITY	0x15
+#define MIB_COUNTER_TX_LATE_COLLISION	0x16
+#define MIB_COUNTER_TX_PAUSE		0x17
+#define MIB_COUNTER_TX_BROADCAST	0x18
+#define MIB_COUNTER_TX_MULTICAST	0x19
+#define MIB_COUNTER_TX_UNICAST		0x1A
+#define MIB_COUNTER_TX_DEFERRED		0x1B
+#define MIB_COUNTER_TX_TOTAL_COLLISION	0x1C
+#define MIB_COUNTER_TX_EXCESS_COLLISION	0x1D
+#define MIB_COUNTER_TX_SINGLE_COLLISION	0x1E
+#define MIB_COUNTER_TX_MULTI_COLLISION	0x1F
+
+#define MIB_COUNTER_RX_DROPPED_PACKET	0x20
+#define MIB_COUNTER_TX_DROPPED_PACKET	0x21
+
+/**
+ * struct ksz_port_mib - Port MIB data structure
+ * @cnt_ptr:	Current pointer to MIB counter index.
+ * @link_down:	Indication the link has just gone down.
+ * @state:	Connection status of the port.
+ * @mib_start:	The starting counter index.  Some ports do not start at 0.
+ * @counter:	64-bit MIB counter value.
+ * @dropped:	Temporary buffer to remember last read packet dropped values.
+ *
+ * MIB counters needs to be read periodically so that counters do not get
+ * overflowed and give incorrect values.  A right balance is needed to
+ * satisfy this condition and not waste too much CPU time.
+ *
+ * It is pointless to read MIB counters when the port is disconnected.  The
+ * @state provides the connection status so that MIB counters are read only
+ * when the port is connected.  The @link_down indicates the port is just
+ * disconnected so that all MIB counters are read one last time to update the
+ * information.
+ */
+struct ksz_port_mib {
+	u8 cnt_ptr;
+	u8 link_down;
+	u8 state;
+	u8 mib_start;
+
+	u64 counter[TOTAL_PORT_COUNTER_NUM];
+	u32 dropped[2];
+};
+
+/**
+ * struct ksz_port_cfg - Port configuration data structure
+ * @vid:	VID value.
+ * @member:	Port membership.
+ * @port_prio:	Port priority.
+ * @rx_rate:	Receive priority rate.
+ * @tx_rate:	Transmit priority rate.
+ * @stp_state:	Current Spanning Tree Protocol state.
+ */
+struct ksz_port_cfg {
+	u16 vid;
+	u8 member;
+	u8 port_prio;
+	u32 rx_rate[PRIO_QUEUES];
+	u32 tx_rate[PRIO_QUEUES];
+	int stp_state;
+};
+
+/**
+ * struct ksz_switch - KSZ8842 switch data structure
+ * @mac_table:	MAC table entries information.
+ * @vlan_table:	VLAN table entries information.
+ * @port_cfg:	Port configuration information.
+ * @diffserv:	DiffServ priority settings.  Possible values from 6-bit of ToS
+ * 		(bit7 ~ bit2) field.
+ * @p_802_1p:	802.1P priority settings.  Possible values from 3-bit of 802.1p
+ * 		Tag priority field.
+ * @br_addr:	Bridge address.  Used for STP.
+ * @other_addr:	Other MAC address.  Used for multiple network device mode.
+ * @broad_per:	Broadcast storm percentage.
+ * @member:	Current port membership.  Used for STP.
+ */
+struct ksz_switch {
+	struct ksz_mac_table mac_table[STATIC_MAC_TABLE_ENTRIES];
+	struct ksz_vlan_table vlan_table[VLAN_TABLE_ENTRIES];
+	struct ksz_port_cfg port_cfg[TOTAL_PORT_NUM];
+
+	u8 diffserv[DIFFSERV_ENTRIES];
+	u8 p_802_1p[PRIO_802_1P_ENTRIES];
+
+	u8 br_addr[MAC_ADDR_LEN];
+	u8 other_addr[MAC_ADDR_LEN];
+
+	u8 broad_per;
+	u8 member;
+};
+
+#define TX_RATE_UNIT			10000
+
+/**
+ * struct ksz_port_info - Port information data structure
+ * @state:	Connection status of the port.
+ * @tx_rate:	Transmit rate divided by 10000 to get Mbit.
+ * @duplex:	Duplex mode.
+ * @advertised:	Advertised auto-negotiation setting.  Used to determine link.
+ * @partner:	Auto-negotiation partner setting.  Used to determine link.
+ * @port_id:	Port index to access actual hardware register.
+ * @pdev:	Pointer to OS dependent network device.
+ */
+struct ksz_port_info {
+	uint state;
+	uint tx_rate;
+	u8 duplex;
+	u8 advertised;
+	u8 partner;
+	u8 port_id;
+	void *pdev;
+};
+
+#define MAX_TX_HELD_SIZE		52000
+
+/* Hardware features and bug fixes. */
+#define LINK_INT_WORKING		(1 << 0)
+#define SMALL_PACKET_TX_BUG		(1 << 1)
+#define HALF_DUPLEX_SIGNAL_BUG		(1 << 2)
+#define IPV6_CSUM_GEN_HACK		(1 << 3)
+#define RX_HUGE_FRAME			(1 << 4)
+#define STP_SUPPORT			(1 << 8)
+
+/* Software overrides. */
+#define PAUSE_FLOW_CTRL			(1 << 0)
+#define FAST_AGING			(1 << 1)
+
+/**
+ * struct ksz_hw - KSZ884X hardware data structure
+ * @io:			Virtual address assigned.
+ * @ksz_switch:		Pointer to KSZ8842 switch.
+ * @port_info:		Port information.
+ * @port_mib:		Port MIB information.
+ * @dev_count:		Number of network devices this hardware supports.
+ * @dst_ports:		Destination ports in switch for transmission.
+ * @id:			Hardware ID.  Used for display only.
+ * @mib_cnt:		Number of MIB counters this hardware has.
+ * @mib_port_cnt:	Number of ports with MIB counters.
+ * @tx_cfg:		Cached transmit control settings.
+ * @rx_cfg:		Cached receive control settings.
+ * @intr_mask:		Current interrupt mask.
+ * @intr_set:		Current interrup set.
+ * @intr_blocked:	Interrupt blocked.
+ * @rx_desc_info:	Receive descriptor information.
+ * @tx_desc_info:	Transmit descriptor information.
+ * @tx_int_cnt:		Transmit interrupt count.  Used for TX optimization.
+ * @tx_int_mask:	Transmit interrupt mask.  Used for TX optimization.
+ * @tx_size:		Transmit data size.  Used for TX optimization.
+ * 			The maximum is defined by MAX_TX_HELD_SIZE.
+ * @perm_addr:		Permanent MAC address.
+ * @override_addr:	Overrided MAC address.
+ * @address:		Additional MAC address entries.
+ * @addr_list_size:	Additional MAC address list size.
+ * @mac_override:	Indication of MAC address overrided.
+ * @promiscuous:	Counter to keep track of promiscuous mode set.
+ * @all_multi:		Counter to keep track of all multicast mode set.
+ * @multi_list:		Multicast address entries.
+ * @multi_bits:		Cached multicast hash table settings.
+ * @multi_list_size:	Multicast address list size.
+ * @enabled:		Indication of hardware enabled.
+ * @rx_stop:		Indication of receive process stop.
+ * @features:		Hardware features to enable.
+ * @overrides:		Hardware features to override.
+ * @parent:		Pointer to parent, network device private structure.
+ */
+struct ksz_hw {
+	void __iomem *io;
+
+	struct ksz_switch *ksz_switch;
+	struct ksz_port_info port_info[SWITCH_PORT_NUM];
+	struct ksz_port_mib port_mib[TOTAL_PORT_NUM];
+	int dev_count;
+	int dst_ports;
+	int id;
+	int mib_cnt;
+	int mib_port_cnt;
+
+	u32 tx_cfg;
+	u32 rx_cfg;
+	u32 intr_mask;
+	u32 intr_set;
+	uint intr_blocked;
+
+	struct ksz_desc_info rx_desc_info;
+	struct ksz_desc_info tx_desc_info;
+
+	int tx_int_cnt;
+	int tx_int_mask;
+	int tx_size;
+
+	u8 perm_addr[MAC_ADDR_LEN];
+	u8 override_addr[MAC_ADDR_LEN];
+	u8 address[ADDITIONAL_ENTRIES][MAC_ADDR_LEN];
+	u8 addr_list_size;
+	u8 mac_override;
+	u8 promiscuous;
+	u8 all_multi;
+	u8 multi_list[MAX_MULTICAST_LIST][MAC_ADDR_LEN];
+	u8 multi_bits[HW_MULTICAST_SIZE];
+	u8 multi_list_size;
+
+	u8 enabled;
+	u8 rx_stop;
+	u8 reserved2[1];
+
+	uint features;
+	uint overrides;
+
+	void *parent;
+};
+
+enum {
+	PHY_NO_FLOW_CTRL,
+	PHY_FLOW_CTRL,
+	PHY_TX_ONLY,
+	PHY_RX_ONLY
+};
+
+/**
+ * struct ksz_port - Virtual port data structure
+ * @duplex:		Duplex mode setting.  1 for half duplex, 2 for full
+ * 			duplex, and 0 for auto, which normally results in full
+ * 			duplex.
+ * @speed:		Speed setting.  10 for 10 Mbit, 100 for 100 Mbit, and
+ * 			0 for auto, which normally results in 100 Mbit.
+ * @force_link:		Force link setting.  0 for auto-negotiation, and 1 for
+ * 			force.
+ * @flow_ctrl:		Flow control setting.  PHY_NO_FLOW_CTRL for no flow
+ * 			control, and PHY_FLOW_CTRL for flow control.
+ * 			PHY_TX_ONLY and PHY_RX_ONLY are not supported for 100
+ * 			Mbit PHY.
+ * @first_port:		Index of first port this port supports.
+ * @mib_port_cnt:	Number of ports with MIB counters.
+ * @port_cnt:		Number of ports this port supports.
+ * @counter:		Port statistics counter.
+ * @hw:			Pointer to hardware structure.
+ * @linked:		Pointer to port information linked to this port.
+ */
+struct ksz_port {
+	u8 duplex;
+	u8 speed;
+	u8 force_link;
+	u8 flow_ctrl;
+
+	int first_port;
+	int mib_port_cnt;
+	int port_cnt;
+	u64 counter[OID_COUNTER_LAST];
+
+	struct ksz_hw *hw;
+	struct ksz_port_info *linked;
+};
+
+/**
+ * struct ksz_timer_info - Timer information data structure
+ * @timer:	Kernel timer.
+ * @cnt:	Running timer counter.
+ * @max:	Number of times to run timer; -1 for infinity.
+ * @period:	Timer period in jiffies.
+ */
+struct ksz_timer_info {
+	struct timer_list timer;
+	int cnt;
+	int max;
+	int period;
+};
+
+/**
+ * struct ksz_shared_mem - OS dependent shared memory data structure
+ * @dma_addr:	Physical DMA address allocated.
+ * @alloc_size:	Allocation size.
+ * @phys:	Actual physical address used.
+ * @alloc_virt:	Virtual address allocated.
+ * @virt:	Actual virtual address used.
+ */
+struct ksz_shared_mem {
+	dma_addr_t dma_addr;
+	uint alloc_size;
+	uint phys;
+	u8 *alloc_virt;
+	u8 *virt;
+};
+
+/**
+ * struct ksz_counter_info - OS dependent counter information data structure
+ * @counter:	Wait queue to wakeup after counters are read.
+ * @time:	Next time in jiffies to read counter.
+ * @read:	Indication of counters read in full or not.
+ */
+struct ksz_counter_info {
+	wait_queue_head_t counter;
+	unsigned long time;
+	int read;
+};
+
+/**
+ * struct dev_info - Network device information data structure
+ * @dev:		Pointer to network device.
+ * @pdev:		Pointer to PCI device.
+ * @hw:			Hardware structure.
+ * @desc_pool:		Physical memory used for descriptor pool.
+ * @hwlock:		Spinlock to prevent hardware from accessing.
+ * @lock:		Mutex lock to prevent device from accessing.
+ * @dev_rcv:		Receive process function used.
+ * @last_skb:		Socket buffer allocated for descriptor rx fragments.
+ * @skb_index:		Buffer index for receiving fragments.
+ * @skb_len:		Buffer length for receiving fragments.
+ * @mib_read:		Workqueue to read MIB counters.
+ * @mib_timer_info:	Timer to read MIB counters.
+ * @counter:		Used for MIB reading.
+ * @mtu:		Current MTU used.  The default is REGULAR_RX_BUF_SIZE;
+ * 			the maximum is MAX_RX_BUF_SIZE.
+ * @opened:		Counter to keep track of device open.
+ * @rx_tasklet:		Receive processing tasklet.
+ * @tx_tasklet:		Transmit processing tasklet.
+ * @wol_enable:		Wake-on-LAN enable set by ethtool.
+ * @wol_support:	Wake-on-LAN support used by ethtool.
+ * @pme_wait:		Used for KSZ8841 power management.
+ */
+struct dev_info {
+	struct net_device *dev;
+	struct pci_dev *pdev;
+
+	struct ksz_hw hw;
+	struct ksz_shared_mem desc_pool;
+
+	spinlock_t hwlock;
+	struct mutex lock;
+
+	int (*dev_rcv)(struct dev_info *);
+
+	struct sk_buff *last_skb;
+	int skb_index;
+	int skb_len;
+
+	struct work_struct mib_read;
+	struct ksz_timer_info mib_timer_info;
+	struct ksz_counter_info counter[TOTAL_PORT_NUM];
+
+	int mtu;
+	int opened;
+
+	struct tasklet_struct rx_tasklet;
+	struct tasklet_struct tx_tasklet;
+
+	int wol_enable;
+	int wol_support;
+	unsigned long pme_wait;
+};
+
+/**
+ * struct dev_priv - Network device private data structure
+ * @adapter:		Adapter device information.
+ * @port:		Port information.
+ * @monitor_time_info:	Timer to monitor ports.
+ * @stats:		Network statistics.
+ * @proc_sem:		Semaphore for proc accessing.
+ * @id:			Device ID.
+ * @mii_if:		MII interface information.
+ * @advertising:	Temporary variable to store advertised settings.
+ * @msg_enable:		The message flags controlling driver output.
+ * @media_state:	The connection status of the device.
+ * @multicast:		The all multicast state of the device.
+ * @promiscuous:	The promiscuous state of the device.
+ */
+struct dev_priv {
+	struct dev_info *adapter;
+	struct ksz_port port;
+	struct ksz_timer_info monitor_timer_info;
+	struct net_device_stats stats;
+
+	struct semaphore proc_sem;
+	int id;
+
+	struct mii_if_info mii_if;
+	u32 advertising;
+
+	u32 msg_enable;
+	int media_state;
+	int multicast;
+	int promiscuous;
+};
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define DRV_NAME		"KSZ884X PCI"
+#define DEVICE_NAME		"KSZ884x PCI"
+#define DRV_VERSION		"1.0.0"
+#define DRV_RELDATE		"Feb 8, 2010"
+
+static char version[] __devinitdata =
+	"Micrel " DEVICE_NAME " " DRV_VERSION " (" DRV_RELDATE ")";
+
+static u8 DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x88, 0x42, 0x01 };
+
+/*
+ * Interrupt processing primary routines
+ */
+
+static inline void hw_ack_intr(struct ksz_hw *hw, uint interrupt)
+{
+	writel(interrupt, hw->io + KS884X_INTERRUPTS_STATUS);
+}
+
+static inline void hw_dis_intr(struct ksz_hw *hw)
+{
+	hw->intr_blocked = hw->intr_mask;
+	writel(0, hw->io + KS884X_INTERRUPTS_ENABLE);
+	hw->intr_set = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
+}
+
+static inline void hw_set_intr(struct ksz_hw *hw, uint interrupt)
+{
+	hw->intr_set = interrupt;
+	writel(interrupt, hw->io + KS884X_INTERRUPTS_ENABLE);
+}
+
+static inline void hw_ena_intr(struct ksz_hw *hw)
+{
+	hw->intr_blocked = 0;
+	hw_set_intr(hw, hw->intr_mask);
+}
+
+static inline void hw_dis_intr_bit(struct ksz_hw *hw, uint bit)
+{
+	hw->intr_mask &= ~(bit);
+}
+
+static inline void hw_turn_off_intr(struct ksz_hw *hw, uint interrupt)
+{
+	u32 read_intr;
+
+	read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
+	hw->intr_set = read_intr & ~interrupt;
+	writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE);
+	hw_dis_intr_bit(hw, interrupt);
+}
+
+/**
+ * hw_turn_on_intr - turn on specified interrupts
+ * @hw: 	The hardware instance.
+ * @bit:	The interrupt bits to be on.
+ *
+ * This routine turns on the specified interrupts in the interrupt mask so that
+ * those interrupts will be enabled.
+ */
+static void hw_turn_on_intr(struct ksz_hw *hw, u32 bit)
+{
+	hw->intr_mask |= bit;
+
+	if (!hw->intr_blocked)
+		hw_set_intr(hw, hw->intr_mask);
+}
+
+static inline void hw_ena_intr_bit(struct ksz_hw *hw, uint interrupt)
+{
+	u32 read_intr;
+
+	read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
+	hw->intr_set = read_intr | interrupt;
+	writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE);
+}
+
+static inline void hw_read_intr(struct ksz_hw *hw, uint *status)
+{
+	*status = readl(hw->io + KS884X_INTERRUPTS_STATUS);
+	*status = *status & hw->intr_set;
+}
+
+static inline void hw_restore_intr(struct ksz_hw *hw, uint interrupt)
+{
+	if (interrupt)
+		hw_ena_intr(hw);
+}
+
+/**
+ * hw_block_intr - block hardware interrupts
+ *
+ * This function blocks all interrupts of the hardware and returns the current
+ * interrupt enable mask so that interrupts can be restored later.
+ *
+ * Return the current interrupt enable mask.
+ */
+static uint hw_block_intr(struct ksz_hw *hw)
+{
+	uint interrupt = 0;
+
+	if (!hw->intr_blocked) {
+		hw_dis_intr(hw);
+		interrupt = hw->intr_blocked;
+	}
+	return interrupt;
+}
+
+/*
+ * Hardware descriptor routines
+ */
+
+static inline void reset_desc(struct ksz_desc *desc, union desc_stat status)
+{
+	status.rx.hw_owned = 0;
+	desc->phw->ctrl.data = cpu_to_le32(status.data);
+}
+
+static inline void release_desc(struct ksz_desc *desc)
+{
+	desc->sw.ctrl.tx.hw_owned = 1;
+	if (desc->sw.buf_size != desc->sw.buf.data) {
+		desc->sw.buf_size = desc->sw.buf.data;
+		desc->phw->buf.data = cpu_to_le32(desc->sw.buf.data);
+	}
+	desc->phw->ctrl.data = cpu_to_le32(desc->sw.ctrl.data);
+}
+
+static void get_rx_pkt(struct ksz_desc_info *info, struct ksz_desc **desc)
+{
+	*desc = &info->ring[info->last];
+	info->last++;
+	info->last &= info->mask;
+	info->avail--;
+	(*desc)->sw.buf.data &= ~KS_DESC_RX_MASK;
+}
+
+static inline void set_rx_buf(struct ksz_desc *desc, u32 addr)
+{
+	desc->phw->addr = cpu_to_le32(addr);
+}
+
+static inline void set_rx_len(struct ksz_desc *desc, u32 len)
+{
+	desc->sw.buf.rx.buf_size = len;
+}
+
+static inline void get_tx_pkt(struct ksz_desc_info *info,
+	struct ksz_desc **desc)
+{
+	*desc = &info->ring[info->next];
+	info->next++;
+	info->next &= info->mask;
+	info->avail--;
+	(*desc)->sw.buf.data &= ~KS_DESC_TX_MASK;
+}
+
+static inline void set_tx_buf(struct ksz_desc *desc, u32 addr)
+{
+	desc->phw->addr = cpu_to_le32(addr);
+}
+
+static inline void set_tx_len(struct ksz_desc *desc, u32 len)
+{
+	desc->sw.buf.tx.buf_size = len;
+}
+
+/* Switch functions */
+
+#define TABLE_READ			0x10
+#define TABLE_SEL_SHIFT			2
+
+#define HW_DELAY(hw, reg)			\
+	do {					\
+		u16 dummy;			\
+		dummy = readw(hw->io + reg);	\
+	} while (0)
+
+/**
+ * sw_r_table - read 4 bytes of data from switch table
+ * @hw:		The hardware instance.
+ * @table:	The table selector.
+ * @addr:	The address of the table entry.
+ * @data:	Buffer to store the read data.
+ *
+ * This routine reads 4 bytes of data from the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void sw_r_table(struct ksz_hw *hw, int table, u16 addr, u32 *data)
+{
+	u16 ctrl_addr;
+	uint interrupt;
+
+	ctrl_addr = (((table << TABLE_SEL_SHIFT) | TABLE_READ) << 8) | addr;
+
+	interrupt = hw_block_intr(hw);
+
+	writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+	HW_DELAY(hw, KS884X_IACR_OFFSET);
+	*data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+	hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_w_table_64 - write 8 bytes of data to the switch table
+ * @hw:		The hardware instance.
+ * @table:	The table selector.
+ * @addr:	The address of the table entry.
+ * @data_hi:	The high part of data to be written (bit63 ~ bit32).
+ * @data_lo:	The low part of data to be written (bit31 ~ bit0).
+ *
+ * This routine writes 8 bytes of data to the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of written data.
+ */
+static void sw_w_table_64(struct ksz_hw *hw, int table, u16 addr, u32 data_hi,
+	u32 data_lo)
+{
+	u16 ctrl_addr;
+	uint interrupt;
+
+	ctrl_addr = ((table << TABLE_SEL_SHIFT) << 8) | addr;
+
+	interrupt = hw_block_intr(hw);
+
+	writel(data_hi, hw->io + KS884X_ACC_DATA_4_OFFSET);
+	writel(data_lo, hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+	writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+	HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+	hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_w_sta_mac_table - write to the static MAC table
+ * @hw: 	The hardware instance.
+ * @addr:	The address of the table entry.
+ * @mac_addr:	The MAC address.
+ * @ports:	The port members.
+ * @override:	The flag to override the port receive/transmit settings.
+ * @valid:	The flag to indicate entry is valid.
+ * @use_fid:	The flag to indicate the FID is valid.
+ * @fid:	The FID value.
+ *
+ * This routine writes an entry of the static MAC table of the switch.  It
+ * calls sw_w_table_64() to write the data.
+ */
+static void sw_w_sta_mac_table(struct ksz_hw *hw, u16 addr, u8 *mac_addr,
+	u8 ports, int override, int valid, int use_fid, u8 fid)
+{
+	u32 data_hi;
+	u32 data_lo;
+
+	data_lo = ((u32) mac_addr[2] << 24) |
+		((u32) mac_addr[3] << 16) |
+		((u32) mac_addr[4] << 8) | mac_addr[5];
+	data_hi = ((u32) mac_addr[0] << 8) | mac_addr[1];
+	data_hi |= (u32) ports << STATIC_MAC_FWD_PORTS_SHIFT;
+
+	if (override)
+		data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+	if (use_fid) {
+		data_hi |= STATIC_MAC_TABLE_USE_FID;
+		data_hi |= (u32) fid << STATIC_MAC_FID_SHIFT;
+	}
+	if (valid)
+		data_hi |= STATIC_MAC_TABLE_VALID;
+
+	sw_w_table_64(hw, TABLE_STATIC_MAC, addr, data_hi, data_lo);
+}
+
+/**
+ * sw_r_vlan_table - read from the VLAN table
+ * @hw: 	The hardware instance.
+ * @addr:	The address of the table entry.
+ * @vid:	Buffer to store the VID.
+ * @fid:	Buffer to store the VID.
+ * @member:	Buffer to store the port membership.
+ *
+ * This function reads an entry of the VLAN table of the switch.  It calls
+ * sw_r_table() to get the data.
+ *
+ * Return 0 if the entry is valid; otherwise -1.
+ */
+static int sw_r_vlan_table(struct ksz_hw *hw, u16 addr, u16 *vid, u8 *fid,
+	u8 *member)
+{
+	u32 data;
+
+	sw_r_table(hw, TABLE_VLAN, addr, &data);
+	if (data & VLAN_TABLE_VALID) {
+		*vid = (u16)(data & VLAN_TABLE_VID);
+		*fid = (u8)((data & VLAN_TABLE_FID) >> VLAN_TABLE_FID_SHIFT);
+		*member = (u8)((data & VLAN_TABLE_MEMBERSHIP) >>
+			VLAN_TABLE_MEMBERSHIP_SHIFT);
+		return 0;
+	}
+	return -1;
+}
+
+/**
+ * port_r_mib_cnt - read MIB counter
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @addr:	The address of the counter.
+ * @cnt:	Buffer to store the counter.
+ *
+ * This routine reads a MIB counter of the port.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void port_r_mib_cnt(struct ksz_hw *hw, int port, u16 addr, u64 *cnt)
+{
+	u32 data;
+	u16 ctrl_addr;
+	uint interrupt;
+	int timeout;
+
+	ctrl_addr = addr + PORT_COUNTER_NUM * port;
+
+	interrupt = hw_block_intr(hw);
+
+	ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ) << 8);
+	writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+	HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+	for (timeout = 100; timeout > 0; timeout--) {
+		data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+		if (data & MIB_COUNTER_VALID) {
+			if (data & MIB_COUNTER_OVERFLOW)
+				*cnt += MIB_COUNTER_VALUE + 1;
+			*cnt += data & MIB_COUNTER_VALUE;
+			break;
+		}
+	}
+
+	hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * port_r_mib_pkt - read dropped packet counts
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @cnt:	Buffer to store the receive and transmit dropped packet counts.
+ *
+ * This routine reads the dropped packet counts of the port.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void port_r_mib_pkt(struct ksz_hw *hw, int port, u32 *last, u64 *cnt)
+{
+	u32 cur;
+	u32 data;
+	u16 ctrl_addr;
+	uint interrupt;
+	int index;
+
+	index = KS_MIB_PACKET_DROPPED_RX_0 + port;
+	do {
+		interrupt = hw_block_intr(hw);
+
+		ctrl_addr = (u16) index;
+		ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ)
+			<< 8);
+		writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+		HW_DELAY(hw, KS884X_IACR_OFFSET);
+		data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+		hw_restore_intr(hw, interrupt);
+
+		data &= MIB_PACKET_DROPPED;
+		cur = *last;
+		if (data != cur) {
+			*last = data;
+			if (data < cur)
+				data += MIB_PACKET_DROPPED + 1;
+			data -= cur;
+			*cnt += data;
+		}
+		++last;
+		++cnt;
+		index -= KS_MIB_PACKET_DROPPED_TX -
+			KS_MIB_PACKET_DROPPED_TX_0 + 1;
+	} while (index >= KS_MIB_PACKET_DROPPED_TX_0 + port);
+}
+
+/**
+ * port_r_cnt - read MIB counters periodically
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine is used to read the counters of the port periodically to avoid
+ * counter overflow.  The hardware should be acquired first before calling this
+ * routine.
+ *
+ * Return non-zero when not all counters not read.
+ */
+static int port_r_cnt(struct ksz_hw *hw, int port)
+{
+	struct ksz_port_mib *mib = &hw->port_mib[port];
+
+	if (mib->mib_start < PORT_COUNTER_NUM)
+		while (mib->cnt_ptr < PORT_COUNTER_NUM) {
+			port_r_mib_cnt(hw, port, mib->cnt_ptr,
+				&mib->counter[mib->cnt_ptr]);
+			++mib->cnt_ptr;
+		}
+	if (hw->mib_cnt > PORT_COUNTER_NUM)
+		port_r_mib_pkt(hw, port, mib->dropped,
+			&mib->counter[PORT_COUNTER_NUM]);
+	mib->cnt_ptr = 0;
+	return 0;
+}
+
+/**
+ * port_init_cnt - initialize MIB counter values
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine is used to initialize all counters to zero if the hardware
+ * cannot do it after reset.
+ */
+static void port_init_cnt(struct ksz_hw *hw, int port)
+{
+	struct ksz_port_mib *mib = &hw->port_mib[port];
+
+	mib->cnt_ptr = 0;
+	if (mib->mib_start < PORT_COUNTER_NUM)
+		do {
+			port_r_mib_cnt(hw, port, mib->cnt_ptr,
+				&mib->counter[mib->cnt_ptr]);
+			++mib->cnt_ptr;
+		} while (mib->cnt_ptr < PORT_COUNTER_NUM);
+	if (hw->mib_cnt > PORT_COUNTER_NUM)
+		port_r_mib_pkt(hw, port, mib->dropped,
+			&mib->counter[PORT_COUNTER_NUM]);
+	memset((void *) mib->counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM);
+	mib->cnt_ptr = 0;
+}
+
+/*
+ * Port functions
+ */
+
+/**
+ * port_chk - check port register bits
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the port register.
+ * @bits:	The data bits to check.
+ *
+ * This function checks whether the specified bits of the port register are set
+ * or not.
+ *
+ * Return 0 if the bits are not set.
+ */
+static int port_chk(struct ksz_hw *hw, int port, int offset, u16 bits)
+{
+	u32 addr;
+	u16 data;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += offset;
+	data = readw(hw->io + addr);
+	return (data & bits) == bits;
+}
+
+/**
+ * port_cfg - set port register bits
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the port register.
+ * @bits:	The data bits to set.
+ * @set:	The flag indicating whether the bits are to be set or not.
+ *
+ * This routine sets or resets the specified bits of the port register.
+ */
+static void port_cfg(struct ksz_hw *hw, int port, int offset, u16 bits,
+	int set)
+{
+	u32 addr;
+	u16 data;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += offset;
+	data = readw(hw->io + addr);
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+	writew(data, hw->io + addr);
+}
+
+/**
+ * port_chk_shift - check port bit
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the register.
+ * @shift:	Number of bits to shift.
+ *
+ * This function checks whether the specified port is set in the register or
+ * not.
+ *
+ * Return 0 if the port is not set.
+ */
+static int port_chk_shift(struct ksz_hw *hw, int port, u32 addr, int shift)
+{
+	u16 data;
+	u16 bit = 1 << port;
+
+	data = readw(hw->io + addr);
+	data >>= shift;
+	return (data & bit) == bit;
+}
+
+/**
+ * port_cfg_shift - set port bit
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the register.
+ * @shift:	Number of bits to shift.
+ * @set:	The flag indicating whether the port is to be set or not.
+ *
+ * This routine sets or resets the specified port in the register.
+ */
+static void port_cfg_shift(struct ksz_hw *hw, int port, u32 addr, int shift,
+	int set)
+{
+	u16 data;
+	u16 bits = 1 << port;
+
+	data = readw(hw->io + addr);
+	bits <<= shift;
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+	writew(data, hw->io + addr);
+}
+
+/**
+ * port_r8 - read byte from port register
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the port register.
+ * @data:	Buffer to store the data.
+ *
+ * This routine reads a byte from the port register.
+ */
+static void port_r8(struct ksz_hw *hw, int port, int offset, u8 *data)
+{
+	u32 addr;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += offset;
+	*data = readb(hw->io + addr);
+}
+
+/**
+ * port_r16 - read word from port register.
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the port register.
+ * @data:	Buffer to store the data.
+ *
+ * This routine reads a word from the port register.
+ */
+static void port_r16(struct ksz_hw *hw, int port, int offset, u16 *data)
+{
+	u32 addr;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += offset;
+	*data = readw(hw->io + addr);
+}
+
+/**
+ * port_w16 - write word to port register.
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @offset:	The offset of the port register.
+ * @data:	Data to write.
+ *
+ * This routine writes a word to the port register.
+ */
+static void port_w16(struct ksz_hw *hw, int port, int offset, u16 data)
+{
+	u32 addr;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += offset;
+	writew(data, hw->io + addr);
+}
+
+/**
+ * sw_chk - check switch register bits
+ * @hw: 	The hardware instance.
+ * @addr:	The address of the switch register.
+ * @bits:	The data bits to check.
+ *
+ * This function checks whether the specified bits of the switch register are
+ * set or not.
+ *
+ * Return 0 if the bits are not set.
+ */
+static int sw_chk(struct ksz_hw *hw, u32 addr, u16 bits)
+{
+	u16 data;
+
+	data = readw(hw->io + addr);
+	return (data & bits) == bits;
+}
+
+/**
+ * sw_cfg - set switch register bits
+ * @hw: 	The hardware instance.
+ * @addr:	The address of the switch register.
+ * @bits:	The data bits to set.
+ * @set:	The flag indicating whether the bits are to be set or not.
+ *
+ * This function sets or resets the specified bits of the switch register.
+ */
+static void sw_cfg(struct ksz_hw *hw, u32 addr, u16 bits, int set)
+{
+	u16 data;
+
+	data = readw(hw->io + addr);
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+	writew(data, hw->io + addr);
+}
+
+/* Bandwidth */
+
+static inline void port_cfg_broad_storm(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM, set);
+}
+
+static inline int port_chk_broad_storm(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM);
+}
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROTECTION_RATE	10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE		9969
+
+/**
+ * sw_cfg_broad_storm - configure broadcast storm threshold
+ * @hw: 	The hardware instance.
+ * @percent:	Broadcast storm threshold in percent of transmit rate.
+ *
+ * This routine configures the broadcast storm threshold of the switch.
+ */
+static void sw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
+{
+	u16 data;
+	u32 value = ((u32) BROADCAST_STORM_VALUE * (u32) percent / 100);
+
+	if (value > BROADCAST_STORM_RATE)
+		value = BROADCAST_STORM_RATE;
+
+	data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+	data &= ~(BROADCAST_STORM_RATE_LO | BROADCAST_STORM_RATE_HI);
+	data |= ((value & 0x00FF) << 8) | ((value & 0xFF00) >> 8);
+	writew(data, hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+}
+
+/**
+ * sw_get_board_storm - get broadcast storm threshold
+ * @hw: 	The hardware instance.
+ * @percent:	Buffer to store the broadcast storm threshold percentage.
+ *
+ * This routine retrieves the broadcast storm threshold of the switch.
+ */
+static void sw_get_broad_storm(struct ksz_hw *hw, u8 *percent)
+{
+	int num;
+	u16 data;
+
+	data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+	num = (data & BROADCAST_STORM_RATE_HI);
+	num <<= 8;
+	num |= (data & BROADCAST_STORM_RATE_LO) >> 8;
+	num = (num * 100 + BROADCAST_STORM_VALUE / 2) / BROADCAST_STORM_VALUE;
+	*percent = (u8) num;
+}
+
+/**
+ * sw_dis_broad_storm - disable broadstorm
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine disables the broadcast storm limit function of the switch.
+ */
+static void sw_dis_broad_storm(struct ksz_hw *hw, int port)
+{
+	port_cfg_broad_storm(hw, port, 0);
+}
+
+/**
+ * sw_ena_broad_storm - enable broadcast storm
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine enables the broadcast storm limit function of the switch.
+ */
+static void sw_ena_broad_storm(struct ksz_hw *hw, int port)
+{
+	sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per);
+	port_cfg_broad_storm(hw, port, 1);
+}
+
+/**
+ * sw_init_broad_storm - initialize broadcast storm
+ * @hw: 	The hardware instance.
+ *
+ * This routine initializes the broadcast storm limit function of the switch.
+ */
+static void sw_init_broad_storm(struct ksz_hw *hw)
+{
+	int port;
+
+	hw->ksz_switch->broad_per = 1;
+	sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per);
+	for (port = 0; port < TOTAL_PORT_NUM; port++)
+		sw_dis_broad_storm(hw, port);
+	sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, MULTICAST_STORM_DISABLE, 1);
+}
+
+/**
+ * hw_cfg_broad_storm - configure broadcast storm
+ * @hw: 	The hardware instance.
+ * @percent:	Broadcast storm threshold in percent of transmit rate.
+ *
+ * This routine configures the broadcast storm threshold of the switch.
+ * It is called by user functions.  The hardware should be acquired first.
+ */
+static void hw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
+{
+	if (percent > 100)
+		percent = 100;
+
+	sw_cfg_broad_storm(hw, percent);
+	sw_get_broad_storm(hw, &percent);
+	hw->ksz_switch->broad_per = percent;
+}
+
+/**
+ * sw_dis_prio_rate - disable switch priority rate
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine disables the priority rate function of the switch.
+ */
+static void sw_dis_prio_rate(struct ksz_hw *hw, int port)
+{
+	u32 addr;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += KS8842_PORT_IN_RATE_OFFSET;
+	writel(0, hw->io + addr);
+}
+
+/**
+ * sw_init_prio_rate - initialize switch prioirty rate
+ * @hw: 	The hardware instance.
+ *
+ * This routine initializes the priority rate function of the switch.
+ */
+static void sw_init_prio_rate(struct ksz_hw *hw)
+{
+	int port;
+	int prio;
+	struct ksz_switch *sw = hw->ksz_switch;
+
+	for (port = 0; port < TOTAL_PORT_NUM; port++) {
+		for (prio = 0; prio < PRIO_QUEUES; prio++) {
+			sw->port_cfg[port].rx_rate[prio] =
+			sw->port_cfg[port].tx_rate[prio] = 0;
+		}
+		sw_dis_prio_rate(hw, port);
+	}
+}
+
+/* Communication */
+
+static inline void port_cfg_back_pressure(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE, set);
+}
+
+static inline void port_cfg_force_flow_ctrl(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL, set);
+}
+
+static inline int port_chk_back_pressure(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE);
+}
+
+static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL);
+}
+
+/* Spanning Tree */
+
+static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set);
+}
+
+static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_RX_ENABLE, set);
+}
+
+static inline void port_cfg_tx(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_TX_ENABLE, set);
+}
+
+static inline void sw_cfg_fast_aging(struct ksz_hw *hw, int set)
+{
+	sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, SWITCH_FAST_AGING, set);
+}
+
+static inline void sw_flush_dyn_mac_table(struct ksz_hw *hw)
+{
+	if (!(hw->overrides & FAST_AGING)) {
+		sw_cfg_fast_aging(hw, 1);
+		mdelay(1);
+		sw_cfg_fast_aging(hw, 0);
+	}
+}
+
+/* VLAN */
+
+static inline void port_cfg_ins_tag(struct ksz_hw *hw, int p, int insert)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG, insert);
+}
+
+static inline void port_cfg_rmv_tag(struct ksz_hw *hw, int p, int remove)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG, remove);
+}
+
+static inline int port_chk_ins_tag(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG);
+}
+
+static inline int port_chk_rmv_tag(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG);
+}
+
+static inline void port_cfg_dis_non_vid(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID, set);
+}
+
+static inline void port_cfg_in_filter(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER, set);
+}
+
+static inline int port_chk_dis_non_vid(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID);
+}
+
+static inline int port_chk_in_filter(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER);
+}
+
+/* Mirroring */
+
+static inline void port_cfg_mirror_sniffer(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_SNIFFER, set);
+}
+
+static inline void port_cfg_mirror_rx(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_RX, set);
+}
+
+static inline void port_cfg_mirror_tx(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_TX, set);
+}
+
+static inline void sw_cfg_mirror_rx_tx(struct ksz_hw *hw, int set)
+{
+	sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, SWITCH_MIRROR_RX_TX, set);
+}
+
+static void sw_init_mirror(struct ksz_hw *hw)
+{
+	int port;
+
+	for (port = 0; port < TOTAL_PORT_NUM; port++) {
+		port_cfg_mirror_sniffer(hw, port, 0);
+		port_cfg_mirror_rx(hw, port, 0);
+		port_cfg_mirror_tx(hw, port, 0);
+	}
+	sw_cfg_mirror_rx_tx(hw, 0);
+}
+
+static inline void sw_cfg_unk_def_deliver(struct ksz_hw *hw, int set)
+{
+	sw_cfg(hw, KS8842_SWITCH_CTRL_7_OFFSET,
+		SWITCH_UNK_DEF_PORT_ENABLE, set);
+}
+
+static inline int sw_cfg_chk_unk_def_deliver(struct ksz_hw *hw)
+{
+	return sw_chk(hw, KS8842_SWITCH_CTRL_7_OFFSET,
+		SWITCH_UNK_DEF_PORT_ENABLE);
+}
+
+static inline void sw_cfg_unk_def_port(struct ksz_hw *hw, int port, int set)
+{
+	port_cfg_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0, set);
+}
+
+static inline int sw_chk_unk_def_port(struct ksz_hw *hw, int port)
+{
+	return port_chk_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0);
+}
+
+/* Priority */
+
+static inline void port_cfg_diffserv(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE, set);
+}
+
+static inline void port_cfg_802_1p(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE, set);
+}
+
+static inline void port_cfg_replace_vid(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING, set);
+}
+
+static inline void port_cfg_prio(struct ksz_hw *hw, int p, int set)
+{
+	port_cfg(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE, set);
+}
+
+static inline int port_chk_diffserv(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE);
+}
+
+static inline int port_chk_802_1p(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE);
+}
+
+static inline int port_chk_replace_vid(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING);
+}
+
+static inline int port_chk_prio(struct ksz_hw *hw, int p)
+{
+	return port_chk(hw, p,
+		KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE);
+}
+
+/**
+ * sw_dis_diffserv - disable switch DiffServ priority
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine disables the DiffServ priority function of the switch.
+ */
+static void sw_dis_diffserv(struct ksz_hw *hw, int port)
+{
+	port_cfg_diffserv(hw, port, 0);
+}
+
+/**
+ * sw_dis_802_1p - disable switch 802.1p priority
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine disables the 802.1p priority function of the switch.
+ */
+static void sw_dis_802_1p(struct ksz_hw *hw, int port)
+{
+	port_cfg_802_1p(hw, port, 0);
+}
+
+/**
+ * sw_cfg_replace_null_vid -
+ * @hw: 	The hardware instance.
+ * @set:	The flag to disable or enable.
+ *
+ */
+static void sw_cfg_replace_null_vid(struct ksz_hw *hw, int set)
+{
+	sw_cfg(hw, KS8842_SWITCH_CTRL_3_OFFSET, SWITCH_REPLACE_NULL_VID, set);
+}
+
+/**
+ * sw_cfg_replace_vid - enable switch 802.10 priority re-mapping
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @set:	The flag to disable or enable.
+ *
+ * This routine enables the 802.1p priority re-mapping function of the switch.
+ * That allows 802.1p priority field to be replaced with the port's default
+ * tag's priority value if the ingress packet's 802.1p priority has a higher
+ * priority than port's default tag's priority.
+ */
+static void sw_cfg_replace_vid(struct ksz_hw *hw, int port, int set)
+{
+	port_cfg_replace_vid(hw, port, set);
+}
+
+/**
+ * sw_cfg_port_based - configure switch port based priority
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @prio:	The priority to set.
+ *
+ * This routine configures the port based priority of the switch.
+ */
+static void sw_cfg_port_based(struct ksz_hw *hw, int port, u8 prio)
+{
+	u16 data;
+
+	if (prio > PORT_BASED_PRIORITY_BASE)
+		prio = PORT_BASED_PRIORITY_BASE;
+
+	hw->ksz_switch->port_cfg[port].port_prio = prio;
+
+	port_r16(hw, port, KS8842_PORT_CTRL_1_OFFSET, &data);
+	data &= ~PORT_BASED_PRIORITY_MASK;
+	data |= prio << PORT_BASED_PRIORITY_SHIFT;
+	port_w16(hw, port, KS8842_PORT_CTRL_1_OFFSET, data);
+}
+
+/**
+ * sw_dis_multi_queue - disable transmit multiple queues
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ *
+ * This routine disables the transmit multiple queues selection of the switch
+ * port.  Only single transmit queue on the port.
+ */
+static void sw_dis_multi_queue(struct ksz_hw *hw, int port)
+{
+	port_cfg_prio(hw, port, 0);
+}
+
+/**
+ * sw_init_prio - initialize switch priority
+ * @hw: 	The hardware instance.
+ *
+ * This routine initializes the switch QoS priority functions.
+ */
+static void sw_init_prio(struct ksz_hw *hw)
+{
+	int port;
+	int tos;
+	struct ksz_switch *sw = hw->ksz_switch;
+
+	/*
+	 * Init all the 802.1p tag priority value to be assigned to different
+	 * priority queue.
+	 */
+	sw->p_802_1p[0] = 0;
+	sw->p_802_1p[1] = 0;
+	sw->p_802_1p[2] = 1;
+	sw->p_802_1p[3] = 1;
+	sw->p_802_1p[4] = 2;
+	sw->p_802_1p[5] = 2;
+	sw->p_802_1p[6] = 3;
+	sw->p_802_1p[7] = 3;
+
+	/*
+	 * Init all the DiffServ priority value to be assigned to priority
+	 * queue 0.
+	 */
+	for (tos = 0; tos < DIFFSERV_ENTRIES; tos++)
+		sw->diffserv[tos] = 0;
+
+	/* All QoS functions disabled. */
+	for (port = 0; port < TOTAL_PORT_NUM; port++) {
+		sw_dis_multi_queue(hw, port);
+		sw_dis_diffserv(hw, port);
+		sw_dis_802_1p(hw, port);
+		sw_cfg_replace_vid(hw, port, 0);
+
+		sw->port_cfg[port].port_prio = 0;
+		sw_cfg_port_based(hw, port, sw->port_cfg[port].port_prio);
+	}
+	sw_cfg_replace_null_vid(hw, 0);
+}
+
+/**
+ * port_get_def_vid - get port default VID.
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @vid:	Buffer to store the VID.
+ *
+ * This routine retrieves the default VID of the port.
+ */
+static void port_get_def_vid(struct ksz_hw *hw, int port, u16 *vid)
+{
+	u32 addr;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += KS8842_PORT_CTRL_VID_OFFSET;
+	*vid = readw(hw->io + addr);
+}
+
+/**
+ * sw_init_vlan - initialize switch VLAN
+ * @hw: 	The hardware instance.
+ *
+ * This routine initializes the VLAN function of the switch.
+ */
+static void sw_init_vlan(struct ksz_hw *hw)
+{
+	int port;
+	int entry;
+	struct ksz_switch *sw = hw->ksz_switch;
+
+	/* Read 16 VLAN entries from device's VLAN table. */
+	for (entry = 0; entry < VLAN_TABLE_ENTRIES; entry++) {
+		sw_r_vlan_table(hw, entry,
+			&sw->vlan_table[entry].vid,
+			&sw->vlan_table[entry].fid,
+			&sw->vlan_table[entry].member);
+	}
+
+	for (port = 0; port < TOTAL_PORT_NUM; port++) {
+		port_get_def_vid(hw, port, &sw->port_cfg[port].vid);
+		sw->port_cfg[port].member = PORT_MASK;
+	}
+}
+
+/**
+ * sw_cfg_port_base_vlan - configure port-based VLAN membership
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @member:	The port-based VLAN membership.
+ *
+ * This routine configures the port-based VLAN membership of the port.
+ */
+static void sw_cfg_port_base_vlan(struct ksz_hw *hw, int port, u8 member)
+{
+	u32 addr;
+	u8 data;
+
+	PORT_CTRL_ADDR(port, addr);
+	addr += KS8842_PORT_CTRL_2_OFFSET;
+
+	data = readb(hw->io + addr);
+	data &= ~PORT_VLAN_MEMBERSHIP;
+	data |= (member & PORT_MASK);
+	writeb(data, hw->io + addr);
+
+	hw->ksz_switch->port_cfg[port].member = member;
+}
+
+/**
+ * sw_get_addr - get the switch MAC address.
+ * @hw: 	The hardware instance.
+ * @mac_addr:	Buffer to store the MAC address.
+ *
+ * This function retrieves the MAC address of the switch.
+ */
+static inline void sw_get_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+	int i;
+
+	for (i = 0; i < 6; i += 2) {
+		mac_addr[i] = readb(hw->io + KS8842_MAC_ADDR_0_OFFSET + i);
+		mac_addr[1 + i] = readb(hw->io + KS8842_MAC_ADDR_1_OFFSET + i);
+	}
+}
+
+/**
+ * sw_set_addr - configure switch MAC address
+ * @hw: 	The hardware instance.
+ * @mac_addr:	The MAC address.
+ *
+ * This function configures the MAC address of the switch.
+ */
+static void sw_set_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+	int i;
+
+	for (i = 0; i < 6; i += 2) {
+		writeb(mac_addr[i], hw->io + KS8842_MAC_ADDR_0_OFFSET + i);
+		writeb(mac_addr[1 + i], hw->io + KS8842_MAC_ADDR_1_OFFSET + i);
+	}
+}
+
+/**
+ * sw_set_global_ctrl - set switch global control
+ * @hw: 	The hardware instance.
+ *
+ * This routine sets the global control of the switch function.
+ */
+static void sw_set_global_ctrl(struct ksz_hw *hw)
+{
+	u16 data;
+
+	/* Enable switch MII flow control. */
+	data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+	data |= SWITCH_FLOW_CTRL;
+	writew(data, hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+
+	data = readw(hw->io + KS8842_SWITCH_CTRL_1_OFFSET);
+
+	/* Enable aggressive back off algorithm in half duplex mode. */
+	data |= SWITCH_AGGR_BACKOFF;
+
+	/* Enable automatic fast aging when link changed detected. */
+	data |= SWITCH_AGING_ENABLE;
+	data |= SWITCH_LINK_AUTO_AGING;
+
+	if (hw->overrides & FAST_AGING)
+		data |= SWITCH_FAST_AGING;
+	else
+		data &= ~SWITCH_FAST_AGING;
+	writew(data, hw->io + KS8842_SWITCH_CTRL_1_OFFSET);
+
+	data = readw(hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+
+	/* Enable no excessive collision drop. */
+	data |= NO_EXC_COLLISION_DROP;
+	writew(data, hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+}
+
+enum {
+	STP_STATE_DISABLED = 0,
+	STP_STATE_LISTENING,
+	STP_STATE_LEARNING,
+	STP_STATE_FORWARDING,
+	STP_STATE_BLOCKED,
+	STP_STATE_SIMPLE
+};
+
+/**
+ * port_set_stp_state - configure port spanning tree state
+ * @hw: 	The hardware instance.
+ * @port:	The port index.
+ * @state:	The spanning tree state.
+ *
+ * This routine configures the spanning tree state of the port.
+ */
+static void port_set_stp_state(struct ksz_hw *hw, int port, int state)
+{
+	u16 data;
+
+	port_r16(hw, port, KS8842_PORT_CTRL_2_OFFSET, &data);
+	switch (state) {
+	case STP_STATE_DISABLED:
+		data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE);
+		data |= PORT_LEARN_DISABLE;
+		break;
+	case STP_STATE_LISTENING:
+/*
+ * No need to turn on transmit because of port direct mode.
+ * Turning on receive is required if static MAC table is not setup.
+ */
+		data &= ~PORT_TX_ENABLE;
+		data |= PORT_RX_ENABLE;
+		data |= PORT_LEARN_DISABLE;
+		break;
+	case STP_STATE_LEARNING:
+		data &= ~PORT_TX_ENABLE;
+		data |= PORT_RX_ENABLE;
+		data &= ~PORT_LEARN_DISABLE;
+		break;
+	case STP_STATE_FORWARDING:
+		data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+		data &= ~PORT_LEARN_DISABLE;
+		break;
+	case STP_STATE_BLOCKED:
+/*
+ * Need to setup static MAC table with override to keep receiving BPDU
+ * messages.  See sw_init_stp routine.
+ */
+		data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE);
+		data |= PORT_LEARN_DISABLE;
+		break;
+	case STP_STATE_SIMPLE:
+		data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+		data |= PORT_LEARN_DISABLE;
+		break;
+	}
+	port_w16(hw, port, KS8842_PORT_CTRL_2_OFFSET, data);
+	hw->ksz_switch->port_cfg[port].stp_state = state;
+}
+
+#define STP_ENTRY			0
+#define BROADCAST_ENTRY			1
+#define BRIDGE_ADDR_ENTRY		2
+#define IPV6_ADDR_ENTRY			3
+
+/**
+ * sw_clr_sta_mac_table - clear static MAC table
+ * @hw: 	The hardware instance.
+ *
+ * This routine clears the static MAC table.
+ */
+static void sw_clr_sta_mac_table(struct ksz_hw *hw)
+{
+	struct ksz_mac_table *entry;
+	int i;
+
+	for (i = 0; i < STATIC_MAC_TABLE_ENTRIES; i++) {
+		entry = &hw->ksz_switch->mac_table[i];
+		sw_w_sta_mac_table(hw, i,
+			entry->mac_addr, entry->ports,
+			entry->override, 0,
+			entry->use_fid, entry->fid);
+	}
+}
+
+/**
+ * sw_init_stp - initialize switch spanning tree support
+ * @hw: 	The hardware instance.
+ *
+ * This routine initializes the spanning tree support of the switch.
+ */
+static void sw_init_stp(struct ksz_hw *hw)
+{
+	struct ksz_mac_table *entry;
+
+	entry = &hw->ksz_switch->mac_table[STP_ENTRY];
+	entry->mac_addr[0] = 0x01;
+	entry->mac_addr[1] = 0x80;
+	entry->mac_addr[2] = 0xC2;
+	entry->mac_addr[3] = 0x00;
+	entry->mac_addr[4] = 0x00;
+	entry->mac_addr[5] = 0x00;
+	entry->ports = HOST_MASK;
+	entry->override = 1;
+	entry->valid = 1;
+	sw_w_sta_mac_table(hw, STP_ENTRY,
+		entry->mac_addr, entry->ports,
+		entry->override, entry->valid,
+		entry->use_fid, entry->fid);
+}
+
+/**
+ * sw_block_addr - block certain packets from the host port
+ * @hw: 	The hardware instance.
+ *
+ * This routine blocks certain packets from reaching to the host port.
+ */
+static void sw_block_addr(struct ksz_hw *hw)
+{
+	struct ksz_mac_table *entry;
+	int i;
+
+	for (i = BROADCAST_ENTRY; i <= IPV6_ADDR_ENTRY; i++) {
+		entry = &hw->ksz_switch->mac_table[i];
+		entry->valid = 0;
+		sw_w_sta_mac_table(hw, i,
+			entry->mac_addr, entry->ports,
+			entry->override, entry->valid,
+			entry->use_fid, entry->fid);
+	}
+}
+
+#define PHY_LINK_SUPPORT		\
+	(PHY_AUTO_NEG_ASYM_PAUSE |	\
+	PHY_AUTO_NEG_SYM_PAUSE |	\
+	PHY_AUTO_NEG_100BT4 |		\
+	PHY_AUTO_NEG_100BTX_FD |	\
+	PHY_AUTO_NEG_100BTX |		\
+	PHY_AUTO_NEG_10BT_FD |		\
+	PHY_AUTO_NEG_10BT)
+
+static inline void hw_r_phy_ctrl(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_w_phy_ctrl(struct ksz_hw *hw, int phy, u16 data)
+{
+	writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_r_phy_link_stat(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_STATUS_OFFSET);
+}
+
+static inline void hw_r_phy_auto_neg(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET);
+}
+
+static inline void hw_w_phy_auto_neg(struct ksz_hw *hw, int phy, u16 data)
+{
+	writew(data, hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET);
+}
+
+static inline void hw_r_phy_rem_cap(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_REMOTE_CAP_OFFSET);
+}
+
+static inline void hw_r_phy_crossover(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_w_phy_crossover(struct ksz_hw *hw, int phy, u16 data)
+{
+	writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_r_phy_polarity(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_w_phy_polarity(struct ksz_hw *hw, int phy, u16 data)
+{
+	writew(data, hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_r_phy_link_md(struct ksz_hw *hw, int phy, u16 *data)
+{
+	*data = readw(hw->io + phy + KS884X_PHY_LINK_MD_OFFSET);
+}
+
+static inline void hw_w_phy_link_md(struct ksz_hw *hw, int phy, u16 data)
+{
+	writew(data, hw->io + phy + KS884X_PHY_LINK_MD_OFFSET);
+}
+
+/**
+ * hw_r_phy - read data from PHY register
+ * @hw: 	The hardware instance.
+ * @port:	Port to read.
+ * @reg:	PHY register to read.
+ * @val:	Buffer to store the read data.
+ *
+ * This routine reads data from the PHY register.
+ */
+static void hw_r_phy(struct ksz_hw *hw, int port, u16 reg, u16 *val)
+{
+	int phy;
+
+	phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg;
+	*val = readw(hw->io + phy);
+}
+
+/**
+ * port_w_phy - write data to PHY register
+ * @hw: 	The hardware instance.
+ * @port:	Port to write.
+ * @reg:	PHY register to write.
+ * @val:	Word data to write.
+ *
+ * This routine writes data to the PHY register.
+ */
+static void hw_w_phy(struct ksz_hw *hw, int port, u16 reg, u16 val)
+{
+	int phy;
+
+	phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg;
+	writew(val, hw->io + phy);
+}
+
+/*
+ * EEPROM access functions
+ */
+
+#define AT93C_CODE			0
+#define AT93C_WR_OFF			0x00
+#define AT93C_WR_ALL			0x10
+#define AT93C_ER_ALL			0x20
+#define AT93C_WR_ON			0x30
+
+#define AT93C_WRITE			1
+#define AT93C_READ			2
+#define AT93C_ERASE			3
+
+#define EEPROM_DELAY			4
+
+static inline void drop_gpio(struct ksz_hw *hw, u8 gpio)
+{
+	u16 data;
+
+	data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET);
+	data &= ~gpio;
+	writew(data, hw->io + KS884X_EEPROM_CTRL_OFFSET);
+}
+
+static inline void raise_gpio(struct ksz_hw *hw, u8 gpio)
+{
+	u16 data;
+
+	data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET);
+	data |= gpio;
+	writew(data, hw->io + KS884X_EEPROM_CTRL_OFFSET);
+}
+
+static inline u8 state_gpio(struct ksz_hw *hw, u8 gpio)
+{
+	u16 data;
+
+	data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET);
+	return (u8)(data & gpio);
+}
+
+static void eeprom_clk(struct ksz_hw *hw)
+{
+	raise_gpio(hw, EEPROM_SERIAL_CLOCK);
+	udelay(EEPROM_DELAY);
+	drop_gpio(hw, EEPROM_SERIAL_CLOCK);
+	udelay(EEPROM_DELAY);
+}
+
+static u16 spi_r(struct ksz_hw *hw)
+{
+	int i;
+	u16 temp = 0;
+
+	for (i = 15; i >= 0; i--) {
+		raise_gpio(hw, EEPROM_SERIAL_CLOCK);
+		udelay(EEPROM_DELAY);
+
+		temp |= (state_gpio(hw, EEPROM_DATA_IN)) ? 1 << i : 0;
+
+		drop_gpio(hw, EEPROM_SERIAL_CLOCK);
+		udelay(EEPROM_DELAY);
+	}
+	return temp;
+}
+
+static void spi_w(struct ksz_hw *hw, u16 data)
+{
+	int i;
+
+	for (i = 15; i >= 0; i--) {
+		(data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+			drop_gpio(hw, EEPROM_DATA_OUT);
+		eeprom_clk(hw);
+	}
+}
+
+static void spi_reg(struct ksz_hw *hw, u8 data, u8 reg)
+{
+	int i;
+
+	/* Initial start bit */
+	raise_gpio(hw, EEPROM_DATA_OUT);
+	eeprom_clk(hw);
+
+	/* AT93C operation */
+	for (i = 1; i >= 0; i--) {
+		(data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+			drop_gpio(hw, EEPROM_DATA_OUT);
+		eeprom_clk(hw);
+	}
+
+	/* Address location */
+	for (i = 5; i >= 0; i--) {
+		(reg & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+			drop_gpio(hw, EEPROM_DATA_OUT);
+		eeprom_clk(hw);
+	}
+}
+
+#define EEPROM_DATA_RESERVED		0
+#define EEPROM_DATA_MAC_ADDR_0		1
+#define EEPROM_DATA_MAC_ADDR_1		2
+#define EEPROM_DATA_MAC_ADDR_2		3
+#define EEPROM_DATA_SUBSYS_ID		4
+#define EEPROM_DATA_SUBSYS_VEN_ID	5
+#define EEPROM_DATA_PM_CAP		6
+
+/* User defined EEPROM data */
+#define EEPROM_DATA_OTHER_MAC_ADDR	9
+
+/**
+ * eeprom_read - read from AT93C46 EEPROM
+ * @hw: 	The hardware instance.
+ * @reg:	The register offset.
+ *
+ * This function reads a word from the AT93C46 EEPROM.
+ *
+ * Return the data value.
+ */
+static u16 eeprom_read(struct ksz_hw *hw, u8 reg)
+{
+	u16 data;
+
+	raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+	spi_reg(hw, AT93C_READ, reg);
+	data = spi_r(hw);
+
+	drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+	return data;
+}
+
+/**
+ * eeprom_write - write to AT93C46 EEPROM
+ * @hw: 	The hardware instance.
+ * @reg:	The register offset.
+ * @data:	The data value.
+ *
+ * This procedure writes a word to the AT93C46 EEPROM.
+ */
+static void eeprom_write(struct ksz_hw *hw, u8 reg, u16 data)
+{
+	int timeout;
+
+	raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+	/* Enable write. */
+	spi_reg(hw, AT93C_CODE, AT93C_WR_ON);
+	drop_gpio(hw, EEPROM_CHIP_SELECT);
+	udelay(1);
+
+	/* Erase the register. */
+	raise_gpio(hw, EEPROM_CHIP_SELECT);
+	spi_reg(hw, AT93C_ERASE, reg);
+	drop_gpio(hw, EEPROM_CHIP_SELECT);
+	udelay(1);
+
+	/* Check operation complete. */
+	raise_gpio(hw, EEPROM_CHIP_SELECT);
+	timeout = 8;
+	mdelay(2);
+	do {
+		mdelay(1);
+	} while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout);
+	drop_gpio(hw, EEPROM_CHIP_SELECT);
+	udelay(1);
+
+	/* Write the register. */
+	raise_gpio(hw, EEPROM_CHIP_SELECT);
+	spi_reg(hw, AT93C_WRITE, reg);
+	spi_w(hw, data);
+	drop_gpio(hw, EEPROM_CHIP_SELECT);
+	udelay(1);
+
+	/* Check operation complete. */
+	raise_gpio(hw, EEPROM_CHIP_SELECT);
+	timeout = 8;
+	mdelay(2);
+	do {
+		mdelay(1);
+	} while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout);
+	drop_gpio(hw, EEPROM_CHIP_SELECT);
+	udelay(1);
+
+	/* Disable write. */
+	raise_gpio(hw, EEPROM_CHIP_SELECT);
+	spi_reg(hw, AT93C_CODE, AT93C_WR_OFF);
+
+	drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+}
+
+/*
+ * Link detection routines
+ */
+
+static u16 advertised_flow_ctrl(struct ksz_port *port, u16 ctrl)
+{
+	ctrl &= ~PORT_AUTO_NEG_SYM_PAUSE;
+	switch (port->flow_ctrl) {
+	case PHY_FLOW_CTRL:
+		ctrl |= PORT_AUTO_NEG_SYM_PAUSE;
+		break;
+	/* Not supported. */
+	case PHY_TX_ONLY:
+	case PHY_RX_ONLY:
+	default:
+		break;
+	}
+	return ctrl;
+}
+
+static void set_flow_ctrl(struct ksz_hw *hw, int rx, int tx)
+{
+	u32 rx_cfg;
+	u32 tx_cfg;
+
+	rx_cfg = hw->rx_cfg;
+	tx_cfg = hw->tx_cfg;
+	if (rx)
+		hw->rx_cfg |= DMA_RX_FLOW_ENABLE;
+	else
+		hw->rx_cfg &= ~DMA_RX_FLOW_ENABLE;
+	if (tx)
+		hw->tx_cfg |= DMA_TX_FLOW_ENABLE;
+	else
+		hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE;
+	if (hw->enabled) {
+		if (rx_cfg != hw->rx_cfg)
+			writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+		if (tx_cfg != hw->tx_cfg)
+			writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL);
+	}
+}
+
+static void determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port,
+	u16 local, u16 remote)
+{
+	int rx;
+	int tx;
+
+	if (hw->overrides & PAUSE_FLOW_CTRL)
+		return;
+
+	rx = tx = 0;
+	if (port->force_link)
+		rx = tx = 1;
+	if (remote & PHY_AUTO_NEG_SYM_PAUSE) {
+		if (local & PHY_AUTO_NEG_SYM_PAUSE) {
+			rx = tx = 1;
+		} else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) &&
+				(local & PHY_AUTO_NEG_PAUSE) ==
+				PHY_AUTO_NEG_ASYM_PAUSE) {
+			tx = 1;
+		}
+	} else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) {
+		if ((local & PHY_AUTO_NEG_PAUSE) == PHY_AUTO_NEG_PAUSE)
+			rx = 1;
+	}
+	if (!hw->ksz_switch)
+		set_flow_ctrl(hw, rx, tx);
+}
+
+static inline void port_cfg_change(struct ksz_hw *hw, struct ksz_port *port,
+	struct ksz_port_info *info, u16 link_status)
+{
+	if ((hw->features & HALF_DUPLEX_SIGNAL_BUG) &&
+			!(hw->overrides & PAUSE_FLOW_CTRL)) {
+		u32 cfg = hw->tx_cfg;
+
+		/* Disable flow control in the half duplex mode. */
+		if (1 == info->duplex)
+			hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE;
+		if (hw->enabled && cfg != hw->tx_cfg)
+			writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL);
+	}
+}
+
+/**
+ * port_get_link_speed - get current link status
+ * @port: 	The port instance.
+ *
+ * This routine reads PHY registers to determine the current link status of the
+ * switch ports.
+ */
+static void port_get_link_speed(struct ksz_port *port)
+{
+	uint interrupt;
+	struct ksz_port_info *info;
+	struct ksz_port_info *linked = NULL;
+	struct ksz_hw *hw = port->hw;
+	u16 data;
+	u16 status;
+	u8 local;
+	u8 remote;
+	int i;
+	int p;
+	int change = 0;
+
+	interrupt = hw_block_intr(hw);
+
+	for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+		info = &hw->port_info[p];
+		port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data);
+		port_r16(hw, p, KS884X_PORT_STATUS_OFFSET, &status);
+
+		/*
+		 * Link status is changing all the time even when there is no
+		 * cable connection!
+		 */
+		remote = status & (PORT_AUTO_NEG_COMPLETE |
+			PORT_STATUS_LINK_GOOD);
+		local = (u8) data;
+
+		/* No change to status. */
+		if (local == info->advertised && remote == info->partner)
+			continue;
+
+		info->advertised = local;
+		info->partner = remote;
+		if (status & PORT_STATUS_LINK_GOOD) {
+
+			/* Remember the first linked port. */
+			if (!linked)
+				linked = info;
+
+			info->tx_rate = 10 * TX_RATE_UNIT;
+			if (status & PORT_STATUS_SPEED_100MBIT)
+				info->tx_rate = 100 * TX_RATE_UNIT;
+
+			info->duplex = 1;
+			if (status & PORT_STATUS_FULL_DUPLEX)
+				info->duplex = 2;
+
+			if (media_connected != info->state) {
+				hw_r_phy(hw, p, KS884X_PHY_AUTO_NEG_OFFSET,
+					&data);
+				hw_r_phy(hw, p, KS884X_PHY_REMOTE_CAP_OFFSET,
+					&status);
+				determine_flow_ctrl(hw, port, data, status);
+				if (hw->ksz_switch) {
+					port_cfg_back_pressure(hw, p,
+						(1 == info->duplex));
+				}
+				change |= 1 << i;
+				port_cfg_change(hw, port, info, status);
+			}
+			info->state = media_connected;
+		} else {
+			if (media_disconnected != info->state) {
+				change |= 1 << i;
+
+				/* Indicate the link just goes down. */
+				hw->port_mib[p].link_down = 1;
+			}
+			info->state = media_disconnected;
+		}
+		hw->port_mib[p].state = (u8) info->state;
+	}
+
+	if (linked && media_disconnected == port->linked->state)
+		port->linked = linked;
+
+	hw_restore_intr(hw, interrupt);
+}
+
+#define PHY_RESET_TIMEOUT		10
+
+/**
+ * port_set_link_speed - set port speed
+ * @port: 	The port instance.
+ *
+ * This routine sets the link speed of the switch ports.
+ */
+static void port_set_link_speed(struct ksz_port *port)
+{
+	struct ksz_port_info *info;
+	struct ksz_hw *hw = port->hw;
+	u16 data;
+	u16 cfg;
+	u8 status;
+	int i;
+	int p;
+
+	for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+		info = &hw->port_info[p];
+
+		port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data);
+		port_r8(hw, p, KS884X_PORT_STATUS_OFFSET, &status);
+
+		cfg = 0;
+		if (status & PORT_STATUS_LINK_GOOD)
+			cfg = data;
+
+		data |= PORT_AUTO_NEG_ENABLE;
+		data = advertised_flow_ctrl(port, data);
+
+		data |= PORT_AUTO_NEG_100BTX_FD | PORT_AUTO_NEG_100BTX |
+			PORT_AUTO_NEG_10BT_FD | PORT_AUTO_NEG_10BT;
+
+		/* Check if manual configuration is specified by the user. */
+		if (port->speed || port->duplex) {
+			if (10 == port->speed)
+				data &= ~(PORT_AUTO_NEG_100BTX_FD |
+					PORT_AUTO_NEG_100BTX);
+			else if (100 == port->speed)
+				data &= ~(PORT_AUTO_NEG_10BT_FD |
+					PORT_AUTO_NEG_10BT);
+			if (1 == port->duplex)
+				data &= ~(PORT_AUTO_NEG_100BTX_FD |
+					PORT_AUTO_NEG_10BT_FD);
+			else if (2 == port->duplex)
+				data &= ~(PORT_AUTO_NEG_100BTX |
+					PORT_AUTO_NEG_10BT);
+		}
+		if (data != cfg) {
+			data |= PORT_AUTO_NEG_RESTART;
+			port_w16(hw, p, KS884X_PORT_CTRL_4_OFFSET, data);
+		}
+	}
+}
+
+/**
+ * port_force_link_speed - force port speed
+ * @port: 	The port instance.
+ *
+ * This routine forces the link speed of the switch ports.
+ */
+static void port_force_link_speed(struct ksz_port *port)
+{
+	struct ksz_hw *hw = port->hw;
+	u16 data;
+	int i;
+	int phy;
+	int p;
+
+	for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+		phy = KS884X_PHY_1_CTRL_OFFSET + p * PHY_CTRL_INTERVAL;
+		hw_r_phy_ctrl(hw, phy, &data);
+
+		data &= ~PHY_AUTO_NEG_ENABLE;
+
+		if (10 == port->speed)
+			data &= ~PHY_SPEED_100MBIT;
+		else if (100 == port->speed)
+			data |= PHY_SPEED_100MBIT;
+		if (1 == port->duplex)
+			data &= ~PHY_FULL_DUPLEX;
+		else if (2 == port->duplex)
+			data |= PHY_FULL_DUPLEX;
+		hw_w_phy_ctrl(hw, phy, data);
+	}
+}
+
+static void port_set_power_saving(struct ksz_port *port, int enable)
+{
+	struct ksz_hw *hw = port->hw;
+	int i;
+	int p;
+
+	for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++)
+		port_cfg(hw, p,
+			KS884X_PORT_CTRL_4_OFFSET, PORT_POWER_DOWN, enable);
+}
+
+/*
+ * KSZ8841 power management functions
+ */
+
+/**
+ * hw_chk_wol_pme_status - check PMEN pin
+ * @hw: 	The hardware instance.
+ *
+ * This function is used to check PMEN pin is asserted.
+ *
+ * Return 1 if PMEN pin is asserted; otherwise, 0.
+ */
+static int hw_chk_wol_pme_status(struct ksz_hw *hw)
+{
+	struct dev_info *hw_priv = container_of(hw, struct dev_info, hw);
+	struct pci_dev *pdev = hw_priv->pdev;
+	u16 data;
+
+	if (!pdev->pm_cap)
+		return 0;
+	pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data);
+	return (data & PCI_PM_CTRL_PME_STATUS) == PCI_PM_CTRL_PME_STATUS;
+}
+
+/**
+ * hw_clr_wol_pme_status - clear PMEN pin
+ * @hw: 	The hardware instance.
+ *
+ * This routine is used to clear PME_Status to deassert PMEN pin.
+ */
+static void hw_clr_wol_pme_status(struct ksz_hw *hw)
+{
+	struct dev_info *hw_priv = container_of(hw, struct dev_info, hw);
+	struct pci_dev *pdev = hw_priv->pdev;
+	u16 data;
+
+	if (!pdev->pm_cap)
+		return;
+
+	/* Clear PME_Status to deassert PMEN pin. */
+	pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data);
+	data |= PCI_PM_CTRL_PME_STATUS;
+	pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, data);
+}
+
+/**
+ * hw_cfg_wol_pme - enable or disable Wake-on-LAN
+ * @hw: 	The hardware instance.
+ * @set:	The flag indicating whether to enable or disable.
+ *
+ * This routine is used to enable or disable Wake-on-LAN.
+ */
+static void hw_cfg_wol_pme(struct ksz_hw *hw, int set)
+{
+	struct dev_info *hw_priv = container_of(hw, struct dev_info, hw);
+	struct pci_dev *pdev = hw_priv->pdev;
+	u16 data;
+
+	if (!pdev->pm_cap)
+		return;
+	pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data);
+	data &= ~PCI_PM_CTRL_STATE_MASK;
+	if (set)
+		data |= PCI_PM_CTRL_PME_ENABLE | PCI_D3hot;
+	else
+		data &= ~PCI_PM_CTRL_PME_ENABLE;
+	pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, data);
+}
+
+/**
+ * hw_cfg_wol - configure Wake-on-LAN features
+ * @hw: 	The hardware instance.
+ * @frame:	The pattern frame bit.
+ * @set:	The flag indicating whether to enable or disable.
+ *
+ * This routine is used to enable or disable certain Wake-on-LAN features.
+ */
+static void hw_cfg_wol(struct ksz_hw *hw, u16 frame, int set)
+{
+	u16 data;
+
+	data = readw(hw->io + KS8841_WOL_CTRL_OFFSET);
+	if (set)
+		data |= frame;
+	else
+		data &= ~frame;
+	writew(data, hw->io + KS8841_WOL_CTRL_OFFSET);
+}
+
+/**
+ * hw_set_wol_frame - program Wake-on-LAN pattern
+ * @hw: 	The hardware instance.
+ * @i:		The frame index.
+ * @mask_size:	The size of the mask.
+ * @mask:	Mask to ignore certain bytes in the pattern.
+ * @frame_size:	The size of the frame.
+ * @pattern:	The frame data.
+ *
+ * This routine is used to program Wake-on-LAN pattern.
+ */
+static void hw_set_wol_frame(struct ksz_hw *hw, int i, uint mask_size,
+	u8 *mask, uint frame_size, u8 *pattern)
+{
+	int bits;
+	int from;
+	int len;
+	int to;
+	u32 crc;
+	u8 data[64];
+	u8 val = 0;
+
+	if (frame_size > mask_size * 8)
+		frame_size = mask_size * 8;
+	if (frame_size > 64)
+		frame_size = 64;
+
+	i *= 0x10;
+	writel(0, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i);
+	writel(0, hw->io + KS8841_WOL_FRAME_BYTE2_OFFSET + i);
+
+	bits = len = from = to = 0;
+	do {
+		if (bits) {
+			if ((val & 1))
+				data[to++] = pattern[from];
+			val >>= 1;
+			++from;
+			--bits;
+		} else {
+			val = mask[len];
+			writeb(val, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i
+				+ len);
+			++len;
+			if (val)
+				bits = 8;
+			else
+				from += 8;
+		}
+	} while (from < (int) frame_size);
+	if (val) {
+		bits = mask[len - 1];
+		val <<= (from % 8);
+		bits &= ~val;
+		writeb(bits, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i + len -
+			1);
+	}
+	crc = ether_crc(to, data);
+	writel(crc, hw->io + KS8841_WOL_FRAME_CRC_OFFSET + i);
+}
+
+/**
+ * hw_add_wol_arp - add ARP pattern
+ * @hw: 	The hardware instance.
+ * @ip_addr:	The IPv4 address assigned to the device.
+ *
+ * This routine is used to add ARP pattern for waking up the host.
+ */
+static void hw_add_wol_arp(struct ksz_hw *hw, u8 *ip_addr)
+{
+	u8 mask[6] = { 0x3F, 0xF0, 0x3F, 0x00, 0xC0, 0x03 };
+	u8 pattern[42] = {
+		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x08, 0x06,
+		0x00, 0x01, 0x08, 0x00, 0x06, 0x04, 0x00, 0x01,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00 };
+
+	memcpy(&pattern[38], ip_addr, 4);
+	hw_set_wol_frame(hw, 3, 6, mask, 42, pattern);
+}
+
+/**
+ * hw_add_wol_bcast - add broadcast pattern
+ * @hw: 	The hardware instance.
+ *
+ * This routine is used to add broadcast pattern for waking up the host.
+ */
+static void hw_add_wol_bcast(struct ksz_hw *hw)
+{
+	u8 mask[] = { 0x3F };
+	u8 pattern[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+
+	hw_set_wol_frame(hw, 2, 1, mask, MAC_ADDR_LEN, pattern);
+}
+
+/**
+ * hw_add_wol_mcast - add multicast pattern
+ * @hw: 	The hardware instance.
+ *
+ * This routine is used to add multicast pattern for waking up the host.
+ *
+ * It is assumed the multicast packet is the ICMPv6 neighbor solicitation used
+ * by IPv6 ping command.  Note that multicast packets are filtred through the
+ * multicast hash table, so not all multicast packets can wake up the host.
+ */
+static void hw_add_wol_mcast(struct ksz_hw *hw)
+{
+	u8 mask[] = { 0x3F };
+	u8 pattern[] = { 0x33, 0x33, 0xFF, 0x00, 0x00, 0x00 };
+
+	memcpy(&pattern[3], &hw->override_addr[3], 3);
+	hw_set_wol_frame(hw, 1, 1, mask, 6, pattern);
+}
+
+/**
+ * hw_add_wol_ucast - add unicast pattern
+ * @hw: 	The hardware instance.
+ *
+ * This routine is used to add unicast pattern to wakeup the host.
+ *
+ * It is assumed the unicast packet is directed to the device, as the hardware
+ * can only receive them in normal case.
+ */
+static void hw_add_wol_ucast(struct ksz_hw *hw)
+{
+	u8 mask[] = { 0x3F };
+
+	hw_set_wol_frame(hw, 0, 1, mask, MAC_ADDR_LEN, hw->override_addr);
+}
+
+/**
+ * hw_enable_wol - enable Wake-on-LAN
+ * @hw: 	The hardware instance.
+ * @wol_enable:	The Wake-on-LAN settings.
+ * @net_addr:	The IPv4 address assigned to the device.
+ *
+ * This routine is used to enable Wake-on-LAN depending on driver settings.
+ */
+static void hw_enable_wol(struct ksz_hw *hw, u32 wol_enable, u8 *net_addr)
+{
+	hw_cfg_wol(hw, KS8841_WOL_MAGIC_ENABLE, (wol_enable & WAKE_MAGIC));
+	hw_cfg_wol(hw, KS8841_WOL_FRAME0_ENABLE, (wol_enable & WAKE_UCAST));
+	hw_add_wol_ucast(hw);
+	hw_cfg_wol(hw, KS8841_WOL_FRAME1_ENABLE, (wol_enable & WAKE_MCAST));
+	hw_add_wol_mcast(hw);
+	hw_cfg_wol(hw, KS8841_WOL_FRAME2_ENABLE, (wol_enable & WAKE_BCAST));
+	hw_cfg_wol(hw, KS8841_WOL_FRAME3_ENABLE, (wol_enable & WAKE_ARP));
+	hw_add_wol_arp(hw, net_addr);
+}
+
+/**
+ * hw_init - check driver is correct for the hardware
+ * @hw: 	The hardware instance.
+ *
+ * This function checks the hardware is correct for this driver and sets the
+ * hardware up for proper initialization.
+ *
+ * Return number of ports or 0 if not right.
+ */
+static int hw_init(struct ksz_hw *hw)
+{
+	int rc = 0;
+	u16 data;
+	u16 revision;
+
+	/* Set bus speed to 125MHz. */
+	writew(BUS_SPEED_125_MHZ, hw->io + KS884X_BUS_CTRL_OFFSET);
+
+	/* Check KSZ884x chip ID. */
+	data = readw(hw->io + KS884X_CHIP_ID_OFFSET);
+
+	revision = (data & KS884X_REVISION_MASK) >> KS884X_REVISION_SHIFT;
+	data &= KS884X_CHIP_ID_MASK_41;
+	if (REG_CHIP_ID_41 == data)
+		rc = 1;
+	else if (REG_CHIP_ID_42 == data)
+		rc = 2;
+	else
+		return 0;
+
+	/* Setup hardware features or bug workarounds. */
+	if (revision <= 1) {
+		hw->features |= SMALL_PACKET_TX_BUG;
+		if (1 == rc)
+			hw->features |= HALF_DUPLEX_SIGNAL_BUG;
+	}
+	hw->features |= IPV6_CSUM_GEN_HACK;
+	return rc;
+}
+
+/**
+ * hw_reset - reset the hardware
+ * @hw: 	The hardware instance.
+ *
+ * This routine resets the hardware.
+ */
+static void hw_reset(struct ksz_hw *hw)
+{
+	writew(GLOBAL_SOFTWARE_RESET, hw->io + KS884X_GLOBAL_CTRL_OFFSET);
+
+	/* Wait for device to reset. */
+	mdelay(10);
+
+	/* Write 0 to clear device reset. */
+	writew(0, hw->io + KS884X_GLOBAL_CTRL_OFFSET);
+}
+
+/**
+ * hw_setup - setup the hardware
+ * @hw: 	The hardware instance.
+ *
+ * This routine setup the hardware for proper operation.
+ */
+static void hw_setup(struct ksz_hw *hw)
+{
+#if SET_DEFAULT_LED
+	u16 data;
+
+	/* Change default LED mode. */
+	data = readw(hw->io + KS8842_SWITCH_CTRL_5_OFFSET);
+	data &= ~LED_MODE;
+	data |= SET_DEFAULT_LED;
+	writew(data, hw->io + KS8842_SWITCH_CTRL_5_OFFSET);
+#endif
+
+	/* Setup transmit control. */
+	hw->tx_cfg = (DMA_TX_PAD_ENABLE | DMA_TX_CRC_ENABLE |
+		(DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_TX_ENABLE);
+
+	/* Setup receive control. */
+	hw->rx_cfg = (DMA_RX_BROADCAST | DMA_RX_UNICAST |
+		(DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_RX_ENABLE);
+	hw->rx_cfg |= KS884X_DMA_RX_MULTICAST;
+
+	/* Hardware cannot handle UDP packet in IP fragments. */
+	hw->rx_cfg |= (DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP);
+
+	if (hw->all_multi)
+		hw->rx_cfg |= DMA_RX_ALL_MULTICAST;
+	if (hw->promiscuous)
+		hw->rx_cfg |= DMA_RX_PROMISCUOUS;
+}
+
+/**
+ * hw_setup_intr - setup interrupt mask
+ * @hw: 	The hardware instance.
+ *
+ * This routine setup the interrupt mask for proper operation.
+ */
+static void hw_setup_intr(struct ksz_hw *hw)
+{
+	hw->intr_mask = KS884X_INT_MASK | KS884X_INT_RX_OVERRUN;
+}
+
+static void ksz_check_desc_num(struct ksz_desc_info *info)
+{
+#define MIN_DESC_SHIFT  2
+
+	int alloc = info->alloc;
+	int shift;
+
+	shift = 0;
+	while (!(alloc & 1)) {
+		shift++;
+		alloc >>= 1;
+	}
+	if (alloc != 1 || shift < MIN_DESC_SHIFT) {
+		printk(KERN_ALERT "Hardware descriptor numbers not right!\n");
+		while (alloc) {
+			shift++;
+			alloc >>= 1;
+		}
+		if (shift < MIN_DESC_SHIFT)
+			shift = MIN_DESC_SHIFT;
+		alloc = 1 << shift;
+		info->alloc = alloc;
+	}
+	info->mask = info->alloc - 1;
+}
+
+static void hw_init_desc(struct ksz_desc_info *desc_info, int transmit)
+{
+	int i;
+	u32 phys = desc_info->ring_phys;
+	struct ksz_hw_desc *desc = desc_info->ring_virt;
+	struct ksz_desc *cur = desc_info->ring;
+	struct ksz_desc *previous = NULL;
+
+	for (i = 0; i < desc_info->alloc; i++) {
+		cur->phw = desc++;
+		phys += desc_info->size;
+		previous = cur++;
+		previous->phw->next = cpu_to_le32(phys);
+	}
+	previous->phw->next = cpu_to_le32(desc_info->ring_phys);
+	previous->sw.buf.rx.end_of_ring = 1;
+	previous->phw->buf.data = cpu_to_le32(previous->sw.buf.data);
+
+	desc_info->avail = desc_info->alloc;
+	desc_info->last = desc_info->next = 0;
+
+	desc_info->cur = desc_info->ring;
+}
+
+/**
+ * hw_set_desc_base - set descriptor base addresses
+ * @hw: 	The hardware instance.
+ * @tx_addr:	The transmit descriptor base.
+ * @rx_addr:	The receive descriptor base.
+ *
+ * This routine programs the descriptor base addresses after reset.
+ */
+static void hw_set_desc_base(struct ksz_hw *hw, u32 tx_addr, u32 rx_addr)
+{
+	/* Set base address of Tx/Rx descriptors. */
+	writel(tx_addr, hw->io + KS_DMA_TX_ADDR);
+	writel(rx_addr, hw->io + KS_DMA_RX_ADDR);
+}
+
+static void hw_reset_pkts(struct ksz_desc_info *info)
+{
+	info->cur = info->ring;
+	info->avail = info->alloc;
+	info->last = info->next = 0;
+}
+
+static inline void hw_resume_rx(struct ksz_hw *hw)
+{
+	writel(DMA_START, hw->io + KS_DMA_RX_START);
+}
+
+/**
+ * hw_start_rx - start receiving
+ * @hw: 	The hardware instance.
+ *
+ * This routine starts the receive function of the hardware.
+ */
+static void hw_start_rx(struct ksz_hw *hw)
+{
+	writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+
+	/* Notify when the receive stops. */
+	hw->intr_mask |= KS884X_INT_RX_STOPPED;
+
+	writel(DMA_START, hw->io + KS_DMA_RX_START);
+	hw_ack_intr(hw, KS884X_INT_RX_STOPPED);
+	hw->rx_stop++;
+
+	/* Variable overflows. */
+	if (0 == hw->rx_stop)
+		hw->rx_stop = 2;
+}
+
+/*
+ * hw_stop_rx - stop receiving
+ * @hw: 	The hardware instance.
+ *
+ * This routine stops the receive function of the hardware.
+ */
+static void hw_stop_rx(struct ksz_hw *hw)
+{
+	hw->rx_stop = 0;
+	hw_turn_off_intr(hw, KS884X_INT_RX_STOPPED);
+	writel((hw->rx_cfg & ~DMA_RX_ENABLE), hw->io + KS_DMA_RX_CTRL);
+}
+
+/**
+ * hw_start_tx - start transmitting
+ * @hw: 	The hardware instance.
+ *
+ * This routine starts the transmit function of the hardware.
+ */
+static void hw_start_tx(struct ksz_hw *hw)
+{
+	writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL);
+}
+
+/**
+ * hw_stop_tx - stop transmitting
+ * @hw: 	The hardware instance.
+ *
+ * This routine stops the transmit function of the hardware.
+ */
+static void hw_stop_tx(struct ksz_hw *hw)
+{
+	writel((hw->tx_cfg & ~DMA_TX_ENABLE), hw->io + KS_DMA_TX_CTRL);
+}
+
+/**
+ * hw_disable - disable hardware
+ * @hw: 	The hardware instance.
+ *
+ * This routine disables the hardware.
+ */
+static void hw_disable(struct ksz_hw *hw)
+{
+	hw_stop_rx(hw);
+	hw_stop_tx(hw);
+	hw->enabled = 0;
+}
+
+/**
+ * hw_enable - enable hardware
+ * @hw: 	The hardware instance.
+ *
+ * This routine enables the hardware.
+ */
+static void hw_enable(struct ksz_hw *hw)
+{
+	hw_start_tx(hw);
+	hw_start_rx(hw);
+	hw->enabled = 1;
+}
+
+/**
+ * hw_alloc_pkt - allocate enough descriptors for transmission
+ * @hw: 	The hardware instance.
+ * @length:	The length of the packet.
+ * @physical:	Number of descriptors required.
+ *
+ * This function allocates descriptors for transmission.
+ *
+ * Return 0 if not successful; 1 for buffer copy; or number of descriptors.
+ */
+static int hw_alloc_pkt(struct ksz_hw *hw, int length, int physical)
+{
+	/* Always leave one descriptor free. */
+	if (hw->tx_desc_info.avail <= 1)
+		return 0;
+
+	/* Allocate a descriptor for transmission and mark it current. */
+	get_tx_pkt(&hw->tx_desc_info, &hw->tx_desc_info.cur);
+	hw->tx_desc_info.cur->sw.buf.tx.first_seg = 1;
+
+	/* Keep track of number of transmit descriptors used so far. */
+	++hw->tx_int_cnt;
+	hw->tx_size += length;
+
+	/* Cannot hold on too much data. */
+	if (hw->tx_size >= MAX_TX_HELD_SIZE)
+		hw->tx_int_cnt = hw->tx_int_mask + 1;
+
+	if (physical > hw->tx_desc_info.avail)
+		return 1;
+
+	return hw->tx_desc_info.avail;
+}
+
+/**
+ * hw_send_pkt - mark packet for transmission
+ * @hw: 	The hardware instance.
+ *
+ * This routine marks the packet for transmission in PCI version.
+ */
+static void hw_send_pkt(struct ksz_hw *hw)
+{
+	struct ksz_desc *cur = hw->tx_desc_info.cur;
+
+	cur->sw.buf.tx.last_seg = 1;
+
+	/* Interrupt only after specified number of descriptors used. */
+	if (hw->tx_int_cnt > hw->tx_int_mask) {
+		cur->sw.buf.tx.intr = 1;
+		hw->tx_int_cnt = 0;
+		hw->tx_size = 0;
+	}
+
+	/* KSZ8842 supports port directed transmission. */
+	cur->sw.buf.tx.dest_port = hw->dst_ports;
+
+	release_desc(cur);
+
+	writel(0, hw->io + KS_DMA_TX_START);
+}
+
+static int empty_addr(u8 *addr)
+{
+	u32 *addr1 = (u32 *) addr;
+	u16 *addr2 = (u16 *) &addr[4];
+
+	return 0 == *addr1 && 0 == *addr2;
+}
+
+/**
+ * hw_set_addr - set MAC address
+ * @hw: 	The hardware instance.
+ *
+ * This routine programs the MAC address of the hardware when the address is
+ * overrided.
+ */
+static void hw_set_addr(struct ksz_hw *hw)
+{
+	int i;
+
+	for (i = 0; i < MAC_ADDR_LEN; i++)
+		writeb(hw->override_addr[MAC_ADDR_ORDER(i)],
+			hw->io + KS884X_ADDR_0_OFFSET + i);
+
+	sw_set_addr(hw, hw->override_addr);
+}
+
+/**
+ * hw_read_addr - read MAC address
+ * @hw: 	The hardware instance.
+ *
+ * This routine retrieves the MAC address of the hardware.
+ */
+static void hw_read_addr(struct ksz_hw *hw)
+{
+	int i;
+
+	for (i = 0; i < MAC_ADDR_LEN; i++)
+		hw->perm_addr[MAC_ADDR_ORDER(i)] = readb(hw->io +
+			KS884X_ADDR_0_OFFSET + i);
+
+	if (!hw->mac_override) {
+		memcpy(hw->override_addr, hw->perm_addr, MAC_ADDR_LEN);
+		if (empty_addr(hw->override_addr)) {
+			memcpy(hw->perm_addr, DEFAULT_MAC_ADDRESS,
+				MAC_ADDR_LEN);
+			memcpy(hw->override_addr, DEFAULT_MAC_ADDRESS,
+				MAC_ADDR_LEN);
+			hw->override_addr[5] += hw->id;
+			hw_set_addr(hw);
+		}
+	}
+}
+
+static void hw_ena_add_addr(struct ksz_hw *hw, int index, u8 *mac_addr)
+{
+	int i;
+	u32 mac_addr_lo;
+	u32 mac_addr_hi;
+
+	mac_addr_hi = 0;
+	for (i = 0; i < 2; i++) {
+		mac_addr_hi <<= 8;
+		mac_addr_hi |= mac_addr[i];
+	}
+	mac_addr_hi |= ADD_ADDR_ENABLE;
+	mac_addr_lo = 0;
+	for (i = 2; i < 6; i++) {
+		mac_addr_lo <<= 8;
+		mac_addr_lo |= mac_addr[i];
+	}
+	index *= ADD_ADDR_INCR;
+
+	writel(mac_addr_lo, hw->io + index + KS_ADD_ADDR_0_LO);
+	writel(mac_addr_hi, hw->io + index + KS_ADD_ADDR_0_HI);
+}
+
+static void hw_set_add_addr(struct ksz_hw *hw)
+{
+	int i;
+
+	for (i = 0; i < ADDITIONAL_ENTRIES; i++) {
+		if (empty_addr(hw->address[i]))
+			writel(0, hw->io + ADD_ADDR_INCR * i +
+				KS_ADD_ADDR_0_HI);
+		else
+			hw_ena_add_addr(hw, i, hw->address[i]);
+	}
+}
+
+static int hw_add_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+	int i;
+	int j = ADDITIONAL_ENTRIES;
+
+	if (!memcmp(hw->override_addr, mac_addr, MAC_ADDR_LEN))
+		return 0;
+	for (i = 0; i < hw->addr_list_size; i++) {
+		if (!memcmp(hw->address[i], mac_addr, MAC_ADDR_LEN))
+			return 0;
+		if (ADDITIONAL_ENTRIES == j && empty_addr(hw->address[i]))
+			j = i;
+	}
+	if (j < ADDITIONAL_ENTRIES) {
+		memcpy(hw->address[j], mac_addr, MAC_ADDR_LEN);
+		hw_ena_add_addr(hw, j, hw->address[j]);
+		return 0;
+	}
+	return -1;
+}
+
+static int hw_del_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+	int i;
+
+	for (i = 0; i < hw->addr_list_size; i++) {
+		if (!memcmp(hw->address[i], mac_addr, MAC_ADDR_LEN)) {
+			memset(hw->address[i], 0, MAC_ADDR_LEN);
+			writel(0, hw->io + ADD_ADDR_INCR * i +
+				KS_ADD_ADDR_0_HI);
+			return 0;
+		}
+	}
+	return -1;
+}
+
+/**
+ * hw_clr_multicast - clear multicast addresses
+ * @hw: 	The hardware instance.
+ *
+ * This routine removes all multicast addresses set in the hardware.
+ */
+static void hw_clr_multicast(struct ksz_hw *hw)
+{
+	int i;
+
+	for (i = 0; i < HW_MULTICAST_SIZE; i++) {
+		hw->multi_bits[i] = 0;
+
+		writeb(0, hw->io + KS884X_MULTICAST_0_OFFSET + i);
+	}
+}
+
+/**
+ * hw_set_grp_addr - set multicast addresses
+ * @hw: 	The hardware instance.
+ *
+ * This routine programs multicast addresses for the hardware to accept those
+ * addresses.
+ */
+static void hw_set_grp_addr(struct ksz_hw *hw)
+{
+	int i;
+	int index;
+	int position;
+	int value;
+
+	memset(hw->multi_bits, 0, sizeof(u8) * HW_MULTICAST_SIZE);
+
+	for (i = 0; i < hw->multi_list_size; i++) {
+		position = (ether_crc(6, hw->multi_list[i]) >> 26) & 0x3f;
+		index = position >> 3;
+		value = 1 << (position & 7);
+		hw->multi_bits[index] |= (u8) value;
+	}
+
+	for (i = 0; i < HW_MULTICAST_SIZE; i++)
+		writeb(hw->multi_bits[i], hw->io + KS884X_MULTICAST_0_OFFSET +
+			i);
+}
+
+/**
+ * hw_set_multicast - enable or disable all multicast receiving
+ * @hw: 	The hardware instance.
+ * @multicast:	To turn on or off the all multicast feature.
+ *
+ * This routine enables/disables the hardware to accept all multicast packets.
+ */
+static void hw_set_multicast(struct ksz_hw *hw, u8 multicast)
+{
+	/* Stop receiving for reconfiguration. */
+	hw_stop_rx(hw);
+
+	if (multicast)
+		hw->rx_cfg |= DMA_RX_ALL_MULTICAST;
+	else
+		hw->rx_cfg &= ~DMA_RX_ALL_MULTICAST;
+
+	if (hw->enabled)
+		hw_start_rx(hw);
+}
+
+/**
+ * hw_set_promiscuous - enable or disable promiscuous receiving
+ * @hw: 	The hardware instance.
+ * @prom:	To turn on or off the promiscuous feature.
+ *
+ * This routine enables/disables the hardware to accept all packets.
+ */
+static void hw_set_promiscuous(struct ksz_hw *hw, u8 prom)
+{
+	/* Stop receiving for reconfiguration. */
+	hw_stop_rx(hw);
+
+	if (prom)
+		hw->rx_cfg |= DMA_RX_PROMISCUOUS;
+	else
+		hw->rx_cfg &= ~DMA_RX_PROMISCUOUS;
+
+	if (hw->enabled)
+		hw_start_rx(hw);
+}
+
+/**
+ * sw_enable - enable the switch
+ * @hw: 	The hardware instance.
+ * @enable:	The flag to enable or disable the switch
+ *
+ * This routine is used to enable/disable the switch in KSZ8842.
+ */
+static void sw_enable(struct ksz_hw *hw, int enable)
+{
+	int port;
+
+	for (port = 0; port < SWITCH_PORT_NUM; port++) {
+		if (hw->dev_count > 1) {
+			/* Set port-base vlan membership with host port. */
+			sw_cfg_port_base_vlan(hw, port,
+				HOST_MASK | (1 << port));
+			port_set_stp_state(hw, port, STP_STATE_DISABLED);
+		} else {
+			sw_cfg_port_base_vlan(hw, port, PORT_MASK);
+			port_set_stp_state(hw, port, STP_STATE_FORWARDING);
+		}
+	}
+	if (hw->dev_count > 1)
+		port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE);
+	else
+		port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_FORWARDING);
+
+	if (enable)
+		enable = KS8842_START;
+	writew(enable, hw->io + KS884X_CHIP_ID_OFFSET);
+}
+
+/**
+ * sw_setup - setup the switch
+ * @hw: 	The hardware instance.
+ *
+ * This routine setup the hardware switch engine for default operation.
+ */
+static void sw_setup(struct ksz_hw *hw)
+{
+	int port;
+
+	sw_set_global_ctrl(hw);
+
+	/* Enable switch broadcast storm protection at 10% percent rate. */
+	sw_init_broad_storm(hw);
+	hw_cfg_broad_storm(hw, BROADCAST_STORM_PROTECTION_RATE);
+	for (port = 0; port < SWITCH_PORT_NUM; port++)
+		sw_ena_broad_storm(hw, port);
+
+	sw_init_prio(hw);
+
+	sw_init_mirror(hw);
+
+	sw_init_prio_rate(hw);
+
+	sw_init_vlan(hw);
+
+	if (hw->features & STP_SUPPORT)
+		sw_init_stp(hw);
+	if (!sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+			SWITCH_TX_FLOW_CTRL | SWITCH_RX_FLOW_CTRL))
+		hw->overrides |= PAUSE_FLOW_CTRL;
+	sw_enable(hw, 1);
+}
+
+/**
+ * ksz_start_timer - start kernel timer
+ * @info:	Kernel timer information.
+ * @time:	The time tick.
+ *
+ * This routine starts the kernel timer after the specified time tick.
+ */
+static void ksz_start_timer(struct ksz_timer_info *info, int time)
+{
+	info->cnt = 0;
+	info->timer.expires = jiffies + time;
+	add_timer(&info->timer);
+
+	/* infinity */
+	info->max = -1;
+}
+
+/**
+ * ksz_stop_timer - stop kernel timer
+ * @info:	Kernel timer information.
+ *
+ * This routine stops the kernel timer.
+ */
+static void ksz_stop_timer(struct ksz_timer_info *info)
+{
+	if (info->max) {
+		info->max = 0;
+		del_timer_sync(&info->timer);
+	}
+}
+
+static void ksz_init_timer(struct ksz_timer_info *info, int period,
+	void (*function)(unsigned long), void *data)
+{
+	info->max = 0;
+	info->period = period;
+	init_timer(&info->timer);
+	info->timer.function = function;
+	info->timer.data = (unsigned long) data;
+}
+
+static void ksz_update_timer(struct ksz_timer_info *info)
+{
+	++info->cnt;
+	if (info->max > 0) {
+		if (info->cnt < info->max) {
+			info->timer.expires = jiffies + info->period;
+			add_timer(&info->timer);
+		} else
+			info->max = 0;
+	} else if (info->max < 0) {
+		info->timer.expires = jiffies + info->period;
+		add_timer(&info->timer);
+	}
+}
+
+/**
+ * ksz_alloc_soft_desc - allocate software descriptors
+ * @desc_info:	Descriptor information structure.
+ * @transmit:	Indication that descriptors are for transmit.
+ *
+ * This local function allocates software descriptors for manipulation in
+ * memory.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_soft_desc(struct ksz_desc_info *desc_info, int transmit)
+{
+	desc_info->ring = kmalloc(sizeof(struct ksz_desc) * desc_info->alloc,
+		GFP_KERNEL);
+	if (!desc_info->ring)
+		return 1;
+	memset((void *) desc_info->ring, 0,
+		sizeof(struct ksz_desc) * desc_info->alloc);
+	hw_init_desc(desc_info, transmit);
+	return 0;
+}
+
+/**
+ * ksz_alloc_desc - allocate hardware descriptors
+ * @adapter:	Adapter information structure.
+ *
+ * This local function allocates hardware descriptors for receiving and
+ * transmitting.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_desc(struct dev_info *adapter)
+{
+	struct ksz_hw *hw = &adapter->hw;
+	int offset;
+
+	/* Allocate memory for RX & TX descriptors. */
+	adapter->desc_pool.alloc_size =
+		hw->rx_desc_info.size * hw->rx_desc_info.alloc +
+		hw->tx_desc_info.size * hw->tx_desc_info.alloc +
+		DESC_ALIGNMENT;
+
+	adapter->desc_pool.alloc_virt =
+		pci_alloc_consistent(
+			adapter->pdev, adapter->desc_pool.alloc_size,
+			&adapter->desc_pool.dma_addr);
+	if (adapter->desc_pool.alloc_virt == NULL) {
+		adapter->desc_pool.alloc_size = 0;
+		return 1;
+	}
+	memset(adapter->desc_pool.alloc_virt, 0, adapter->desc_pool.alloc_size);
+
+	/* Align to the next cache line boundary. */
+	offset = (((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT) ?
+		(DESC_ALIGNMENT -
+		((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT)) : 0);
+	adapter->desc_pool.virt = adapter->desc_pool.alloc_virt + offset;
+	adapter->desc_pool.phys = adapter->desc_pool.dma_addr + offset;
+
+	/* Allocate receive/transmit descriptors. */
+	hw->rx_desc_info.ring_virt = (struct ksz_hw_desc *)
+		adapter->desc_pool.virt;
+	hw->rx_desc_info.ring_phys = adapter->desc_pool.phys;
+	offset = hw->rx_desc_info.alloc * hw->rx_desc_info.size;
+	hw->tx_desc_info.ring_virt = (struct ksz_hw_desc *)
+		(adapter->desc_pool.virt + offset);
+	hw->tx_desc_info.ring_phys = adapter->desc_pool.phys + offset;
+
+	if (ksz_alloc_soft_desc(&hw->rx_desc_info, 0))
+		return 1;
+	if (ksz_alloc_soft_desc(&hw->tx_desc_info, 1))
+		return 1;
+
+	return 0;
+}
+
+/**
+ * free_dma_buf - release DMA buffer resources
+ * @adapter:	Adapter information structure.
+ *
+ * This routine is just a helper function to release the DMA buffer resources.
+ */
+static void free_dma_buf(struct dev_info *adapter, struct ksz_dma_buf *dma_buf,
+	int direction)
+{
+	pci_unmap_single(adapter->pdev, dma_buf->dma, dma_buf->len, direction);
+	dev_kfree_skb(dma_buf->skb);
+	dma_buf->skb = NULL;
+	dma_buf->dma = 0;
+}
+
+/**
+ * ksz_init_rx_buffers - initialize receive descriptors
+ * @adapter:	Adapter information structure.
+ *
+ * This routine initializes DMA buffers for receiving.
+ */
+static void ksz_init_rx_buffers(struct dev_info *adapter)
+{
+	int i;
+	struct ksz_desc *desc;
+	struct ksz_dma_buf *dma_buf;
+	struct ksz_hw *hw = &adapter->hw;
+	struct ksz_desc_info *info = &hw->rx_desc_info;
+
+	for (i = 0; i < hw->rx_desc_info.alloc; i++) {
+		get_rx_pkt(info, &desc);
+
+		dma_buf = DMA_BUFFER(desc);
+		if (dma_buf->skb && dma_buf->len != adapter->mtu)
+			free_dma_buf(adapter, dma_buf, PCI_DMA_FROMDEVICE);
+		dma_buf->len = adapter->mtu;
+		if (!dma_buf->skb)
+			dma_buf->skb = alloc_skb(dma_buf->len, GFP_ATOMIC);
+		if (dma_buf->skb && !dma_buf->dma) {
+			dma_buf->skb->dev = adapter->dev;
+			dma_buf->dma = pci_map_single(
+				adapter->pdev,
+				skb_tail_pointer(dma_buf->skb),
+				dma_buf->len,
+				PCI_DMA_FROMDEVICE);
+		}
+
+		/* Set descriptor. */
+		set_rx_buf(desc, dma_buf->dma);
+		set_rx_len(desc, dma_buf->len);
+		release_desc(desc);
+	}
+}
+
+/**
+ * ksz_alloc_mem - allocate memory for hardware descriptors
+ * @adapter:	Adapter information structure.
+ *
+ * This function allocates memory for use by hardware descriptors for receiving
+ * and transmitting.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_mem(struct dev_info *adapter)
+{
+	struct ksz_hw *hw = &adapter->hw;
+
+	/* Determine the number of receive and transmit descriptors. */
+	hw->rx_desc_info.alloc = NUM_OF_RX_DESC;
+	hw->tx_desc_info.alloc = NUM_OF_TX_DESC;
+
+	/* Determine how many descriptors to skip transmit interrupt. */
+	hw->tx_int_cnt = 0;
+	hw->tx_int_mask = NUM_OF_TX_DESC / 4;
+	if (hw->tx_int_mask > 8)
+		hw->tx_int_mask = 8;
+	while (hw->tx_int_mask) {
+		hw->tx_int_cnt++;
+		hw->tx_int_mask >>= 1;
+	}
+	if (hw->tx_int_cnt) {
+		hw->tx_int_mask = (1 << (hw->tx_int_cnt - 1)) - 1;
+		hw->tx_int_cnt = 0;
+	}
+
+	/* Determine the descriptor size. */
+	hw->rx_desc_info.size =
+		(((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) /
+		DESC_ALIGNMENT) * DESC_ALIGNMENT);
+	hw->tx_desc_info.size =
+		(((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) /
+		DESC_ALIGNMENT) * DESC_ALIGNMENT);
+	if (hw->rx_desc_info.size != sizeof(struct ksz_hw_desc))
+		printk(KERN_ALERT
+			"Hardware descriptor size not right!\n");
+	ksz_check_desc_num(&hw->rx_desc_info);
+	ksz_check_desc_num(&hw->tx_desc_info);
+
+	/* Allocate descriptors. */
+	if (ksz_alloc_desc(adapter))
+		return 1;
+
+	return 0;
+}
+
+/**
+ * ksz_free_desc - free software and hardware descriptors
+ * @adapter:	Adapter information structure.
+ *
+ * This local routine frees the software and hardware descriptors allocated by
+ * ksz_alloc_desc().
+ */
+static void ksz_free_desc(struct dev_info *adapter)
+{
+	struct ksz_hw *hw = &adapter->hw;
+
+	/* Reset descriptor. */
+	hw->rx_desc_info.ring_virt = NULL;
+	hw->tx_desc_info.ring_virt = NULL;
+	hw->rx_desc_info.ring_phys = 0;
+	hw->tx_desc_info.ring_phys = 0;
+
+	/* Free memory. */
+	if (adapter->desc_pool.alloc_virt)
+		pci_free_consistent(
+			adapter->pdev,
+			adapter->desc_pool.alloc_size,
+			adapter->desc_pool.alloc_virt,
+			adapter->desc_pool.dma_addr);
+
+	/* Reset resource pool. */
+	adapter->desc_pool.alloc_size = 0;
+	adapter->desc_pool.alloc_virt = NULL;
+
+	kfree(hw->rx_desc_info.ring);
+	hw->rx_desc_info.ring = NULL;
+	kfree(hw->tx_desc_info.ring);
+	hw->tx_desc_info.ring = NULL;
+}
+
+/**
+ * ksz_free_buffers - free buffers used in the descriptors
+ * @adapter:	Adapter information structure.
+ * @desc_info:	Descriptor information structure.
+ *
+ * This local routine frees buffers used in the DMA buffers.
+ */
+static void ksz_free_buffers(struct dev_info *adapter,
+	struct ksz_desc_info *desc_info, int direction)
+{
+	int i;
+	struct ksz_dma_buf *dma_buf;
+	struct ksz_desc *desc = desc_info->ring;
+
+	for (i = 0; i < desc_info->alloc; i++) {
+		dma_buf = DMA_BUFFER(desc);
+		if (dma_buf->skb)
+			free_dma_buf(adapter, dma_buf, direction);
+		desc++;
+	}
+}
+
+/**
+ * ksz_free_mem - free all resources used by descriptors
+ * @adapter:	Adapter information structure.
+ *
+ * This local routine frees all the resources allocated by ksz_alloc_mem().
+ */
+static void ksz_free_mem(struct dev_info *adapter)
+{
+	/* Free transmit buffers. */
+	ksz_free_buffers(adapter, &adapter->hw.tx_desc_info,
+		PCI_DMA_TODEVICE);
+
+	/* Free receive buffers. */
+	ksz_free_buffers(adapter, &adapter->hw.rx_desc_info,
+		PCI_DMA_FROMDEVICE);
+
+	/* Free descriptors. */
+	ksz_free_desc(adapter);
+}
+
+static void get_mib_counters(struct ksz_hw *hw, int first, int cnt,
+	u64 *counter)
+{
+	int i;
+	int mib;
+	int port;
+	struct ksz_port_mib *port_mib;
+
+	memset(counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM);
+	for (i = 0, port = first; i < cnt; i++, port++) {
+		port_mib = &hw->port_mib[port];
+		for (mib = port_mib->mib_start; mib < hw->mib_cnt; mib++)
+			counter[mib] += port_mib->counter[mib];
+	}
+}
+
+/**
+ * send_packet - send packet
+ * @skb:	Socket buffer.
+ * @dev:	Network device.
+ *
+ * This routine is used to send a packet out to the network.
+ */
+static void send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+	struct ksz_desc *desc;
+	struct ksz_desc *first;
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_desc_info *info = &hw->tx_desc_info;
+	struct ksz_dma_buf *dma_buf;
+	int len;
+	int last_frag = skb_shinfo(skb)->nr_frags;
+
+	/*
+	 * KSZ8842 with multiple device interfaces needs to be told which port
+	 * to send.
+	 */
+	if (hw->dev_count > 1)
+		hw->dst_ports = 1 << priv->port.first_port;
+
+	/* Hardware will pad the length to 60. */
+	len = skb->len;
+
+	/* Remember the very first descriptor. */
+	first = info->cur;
+	desc = first;
+
+	dma_buf = DMA_BUFFER(desc);
+	if (last_frag) {
+		int frag;
+		skb_frag_t *this_frag;
+
+		dma_buf->len = skb->len - skb->data_len;
+
+		dma_buf->dma = pci_map_single(
+			hw_priv->pdev, skb->data, dma_buf->len,
+			PCI_DMA_TODEVICE);
+		set_tx_buf(desc, dma_buf->dma);
+		set_tx_len(desc, dma_buf->len);
+
+		frag = 0;
+		do {
+			this_frag = &skb_shinfo(skb)->frags[frag];
+
+			/* Get a new descriptor. */
+			get_tx_pkt(info, &desc);
+
+			/* Keep track of descriptors used so far. */
+			++hw->tx_int_cnt;
+
+			dma_buf = DMA_BUFFER(desc);
+			dma_buf->len = this_frag->size;
+
+			dma_buf->dma = pci_map_single(
+				hw_priv->pdev,
+				page_address(this_frag->page) +
+				this_frag->page_offset,
+				dma_buf->len,
+				PCI_DMA_TODEVICE);
+			set_tx_buf(desc, dma_buf->dma);
+			set_tx_len(desc, dma_buf->len);
+
+			frag++;
+			if (frag == last_frag)
+				break;
+
+			/* Do not release the last descriptor here. */
+			release_desc(desc);
+		} while (1);
+
+		/* current points to the last descriptor. */
+		info->cur = desc;
+
+		/* Release the first descriptor. */
+		release_desc(first);
+	} else {
+		dma_buf->len = len;
+
+		dma_buf->dma = pci_map_single(
+			hw_priv->pdev, skb->data, dma_buf->len,
+			PCI_DMA_TODEVICE);
+		set_tx_buf(desc, dma_buf->dma);
+		set_tx_len(desc, dma_buf->len);
+	}
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		(desc)->sw.buf.tx.csum_gen_tcp = 1;
+		(desc)->sw.buf.tx.csum_gen_udp = 1;
+	}
+
+	/*
+	 * The last descriptor holds the packet so that it can be returned to
+	 * network subsystem after all descriptors are transmitted.
+	 */
+	dma_buf->skb = skb;
+
+	hw_send_pkt(hw);
+
+	/* Update transmit statistics. */
+	priv->stats.tx_packets++;
+	priv->stats.tx_bytes += len;
+}
+
+/**
+ * transmit_cleanup - clean up transmit descriptors
+ * @dev:	Network device.
+ *
+ * This routine is called to clean up the transmitted buffers.
+ */
+static void transmit_cleanup(struct dev_info *hw_priv, int normal)
+{
+	int last;
+	union desc_stat status;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_desc_info *info = &hw->tx_desc_info;
+	struct ksz_desc *desc;
+	struct ksz_dma_buf *dma_buf;
+	struct net_device *dev = NULL;
+
+	spin_lock(&hw_priv->hwlock);
+	last = info->last;
+
+	while (info->avail < info->alloc) {
+		/* Get next descriptor which is not hardware owned. */
+		desc = &info->ring[last];
+		status.data = le32_to_cpu(desc->phw->ctrl.data);
+		if (status.tx.hw_owned) {
+			if (normal)
+				break;
+			else
+				reset_desc(desc, status);
+		}
+
+		dma_buf = DMA_BUFFER(desc);
+		pci_unmap_single(
+			hw_priv->pdev, dma_buf->dma, dma_buf->len,
+			PCI_DMA_TODEVICE);
+
+		/* This descriptor contains the last buffer in the packet. */
+		if (dma_buf->skb) {
+			dev = dma_buf->skb->dev;
+
+			/* Release the packet back to network subsystem. */
+			dev_kfree_skb_irq(dma_buf->skb);
+			dma_buf->skb = NULL;
+		}
+
+		/* Free the transmitted descriptor. */
+		last++;
+		last &= info->mask;
+		info->avail++;
+	}
+	info->last = last;
+	spin_unlock(&hw_priv->hwlock);
+
+	/* Notify the network subsystem that the packet has been sent. */
+	if (dev)
+		dev->trans_start = jiffies;
+}
+
+/**
+ * transmit_done - transmit done processing
+ * @dev:	Network device.
+ *
+ * This routine is called when the transmit interrupt is triggered, indicating
+ * either a packet is sent successfully or there are transmit errors.
+ */
+static void tx_done(struct dev_info *hw_priv)
+{
+	struct ksz_hw *hw = &hw_priv->hw;
+	int port;
+
+	transmit_cleanup(hw_priv, 1);
+
+	for (port = 0; port < hw->dev_count; port++) {
+		struct net_device *dev = hw->port_info[port].pdev;
+
+		if (netif_running(dev) && netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+	}
+}
+
+static inline void copy_old_skb(struct sk_buff *old, struct sk_buff *skb)
+{
+	skb->dev = old->dev;
+	skb->protocol = old->protocol;
+	skb->ip_summed = old->ip_summed;
+	skb->csum = old->csum;
+	skb_set_network_header(skb, ETH_HLEN);
+
+	dev_kfree_skb(old);
+}
+
+/**
+ * netdev_tx - send out packet
+ * @skb:	Socket buffer.
+ * @dev:	Network device.
+ *
+ * This function is used by the upper network layer to send out a packet.
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	int left;
+	int num = 1;
+	int rc = 0;
+
+	if (hw->features & SMALL_PACKET_TX_BUG) {
+		struct sk_buff *org_skb = skb;
+
+		if (skb->len <= 48) {
+			if (skb_end_pointer(skb) - skb->data >= 50) {
+				memset(&skb->data[skb->len], 0, 50 - skb->len);
+				skb->len = 50;
+			} else {
+				skb = dev_alloc_skb(50);
+				if (!skb)
+					return NETDEV_TX_BUSY;
+				memcpy(skb->data, org_skb->data, org_skb->len);
+				memset(&skb->data[org_skb->len], 0,
+					50 - org_skb->len);
+				skb->len = 50;
+				copy_old_skb(org_skb, skb);
+			}
+		}
+	}
+
+	spin_lock_irq(&hw_priv->hwlock);
+
+	num = skb_shinfo(skb)->nr_frags + 1;
+	left = hw_alloc_pkt(hw, skb->len, num);
+	if (left) {
+		if (left < num ||
+				((hw->features & IPV6_CSUM_GEN_HACK) &&
+				(CHECKSUM_PARTIAL == skb->ip_summed) &&
+				(ETH_P_IPV6 == htons(skb->protocol)))) {
+			struct sk_buff *org_skb = skb;
+
+			skb = dev_alloc_skb(org_skb->len);
+			if (!skb)
+				return NETDEV_TX_BUSY;
+			skb_copy_and_csum_dev(org_skb, skb->data);
+			org_skb->ip_summed = 0;
+			skb->len = org_skb->len;
+			copy_old_skb(org_skb, skb);
+		}
+		send_packet(skb, dev);
+		if (left <= num)
+			netif_stop_queue(dev);
+	} else {
+		/* Stop the transmit queue until packet is allocated. */
+		netif_stop_queue(dev);
+		rc = NETDEV_TX_BUSY;
+	}
+
+	spin_unlock_irq(&hw_priv->hwlock);
+
+	return rc;
+}
+
+/**
+ * netdev_tx_timeout - transmit timeout processing
+ * @dev:	Network device.
+ *
+ * This routine is called when the transmit timer expires.  That indicates the
+ * hardware is not running correctly because transmit interrupts are not
+ * triggered to free up resources so that the transmit routine can continue
+ * sending out packets.  The hardware is reset to correct the problem.
+ */
+static void netdev_tx_timeout(struct net_device *dev)
+{
+	static unsigned long last_reset;
+
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	int port;
+
+	if (hw->dev_count > 1) {
+		/*
+		 * Only reset the hardware if time between calls is long
+		 * enough.
+		 */
+		if (jiffies - last_reset <= dev->watchdog_timeo)
+			hw_priv = NULL;
+	}
+
+	last_reset = jiffies;
+	if (hw_priv) {
+		hw_dis_intr(hw);
+		hw_disable(hw);
+
+		transmit_cleanup(hw_priv, 0);
+		hw_reset_pkts(&hw->rx_desc_info);
+		hw_reset_pkts(&hw->tx_desc_info);
+		ksz_init_rx_buffers(hw_priv);
+
+		hw_reset(hw);
+
+		hw_set_desc_base(hw,
+			hw->tx_desc_info.ring_phys,
+			hw->rx_desc_info.ring_phys);
+		hw_set_addr(hw);
+		if (hw->all_multi)
+			hw_set_multicast(hw, hw->all_multi);
+		else if (hw->multi_list_size)
+			hw_set_grp_addr(hw);
+
+		if (hw->dev_count > 1) {
+			hw_set_add_addr(hw);
+			for (port = 0; port < SWITCH_PORT_NUM; port++) {
+				struct net_device *port_dev;
+
+				port_set_stp_state(hw, port,
+					STP_STATE_DISABLED);
+
+				port_dev = hw->port_info[port].pdev;
+				if (netif_running(port_dev))
+					port_set_stp_state(hw, port,
+						STP_STATE_SIMPLE);
+			}
+		}
+
+		hw_enable(hw);
+		hw_ena_intr(hw);
+	}
+
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+}
+
+static inline void csum_verified(struct sk_buff *skb)
+{
+	unsigned short protocol;
+	struct iphdr *iph;
+
+	protocol = skb->protocol;
+	skb_reset_network_header(skb);
+	iph = (struct iphdr *) skb_network_header(skb);
+	if (protocol == htons(ETH_P_8021Q)) {
+		protocol = iph->tot_len;
+		skb_set_network_header(skb, VLAN_HLEN);
+		iph = (struct iphdr *) skb_network_header(skb);
+	}
+	if (protocol == htons(ETH_P_IP)) {
+		if (iph->protocol == IPPROTO_TCP)
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+	}
+}
+
+static inline int rx_proc(struct net_device *dev, struct ksz_hw* hw,
+	struct ksz_desc *desc, union desc_stat status)
+{
+	int packet_len;
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_dma_buf *dma_buf;
+	struct sk_buff *skb;
+	int rx_status;
+
+	/* Received length includes 4-byte CRC. */
+	packet_len = status.rx.frame_len - 4;
+
+	dma_buf = DMA_BUFFER(desc);
+	pci_dma_sync_single_for_cpu(
+		hw_priv->pdev, dma_buf->dma, packet_len + 4,
+		PCI_DMA_FROMDEVICE);
+
+	do {
+		/* skb->data != skb->head */
+		skb = dev_alloc_skb(packet_len + 2);
+		if (!skb) {
+			priv->stats.rx_dropped++;
+			return -ENOMEM;
+		}
+
+		/*
+		 * Align socket buffer in 4-byte boundary for better
+		 * performance.
+		 */
+		skb_reserve(skb, 2);
+
+		memcpy(skb_put(skb, packet_len),
+			dma_buf->skb->data, packet_len);
+	} while (0);
+
+	skb->dev = dev;
+
+	skb->protocol = eth_type_trans(skb, dev);
+
+	if (hw->rx_cfg & (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP))
+		csum_verified(skb);
+
+	/* Update receive statistics. */
+	priv->stats.rx_packets++;
+	priv->stats.rx_bytes += packet_len;
+
+	/* Notify upper layer for received packet. */
+	dev->last_rx = jiffies;
+
+	rx_status = netif_rx(skb);
+
+	return 0;
+}
+
+static int dev_rcv_packets(struct dev_info *hw_priv)
+{
+	int next;
+	union desc_stat status;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct net_device *dev = hw->port_info[0].pdev;
+	struct ksz_desc_info *info = &hw->rx_desc_info;
+	int left = info->alloc;
+	struct ksz_desc *desc;
+	int received = 0;
+
+	next = info->next;
+	while (left--) {
+		/* Get next descriptor which is not hardware owned. */
+		desc = &info->ring[next];
+		status.data = le32_to_cpu(desc->phw->ctrl.data);
+		if (status.rx.hw_owned)
+			break;
+
+		/* Status valid only when last descriptor bit is set. */
+		if (status.rx.last_desc && status.rx.first_desc) {
+			if (rx_proc(dev, hw, desc, status))
+				goto release_packet;
+			received++;
+		}
+
+release_packet:
+		release_desc(desc);
+		next++;
+		next &= info->mask;
+	}
+	info->next = next;
+
+	return received;
+}
+
+static int port_rcv_packets(struct dev_info *hw_priv)
+{
+	int next;
+	union desc_stat status;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct net_device *dev = hw->port_info[0].pdev;
+	struct ksz_desc_info *info = &hw->rx_desc_info;
+	int left = info->alloc;
+	struct ksz_desc *desc;
+	int received = 0;
+
+	next = info->next;
+	while (left--) {
+		/* Get next descriptor which is not hardware owned. */
+		desc = &info->ring[next];
+		status.data = le32_to_cpu(desc->phw->ctrl.data);
+		if (status.rx.hw_owned)
+			break;
+
+		if (hw->dev_count > 1) {
+			/* Get received port number. */
+			int p = HW_TO_DEV_PORT(status.rx.src_port);
+
+			dev = hw->port_info[p].pdev;
+			if (!netif_running(dev))
+				goto release_packet;
+		}
+
+		/* Status valid only when last descriptor bit is set. */
+		if (status.rx.last_desc && status.rx.first_desc) {
+			if (rx_proc(dev, hw, desc, status))
+				goto release_packet;
+			received++;
+		}
+
+release_packet:
+		release_desc(desc);
+		next++;
+		next &= info->mask;
+	}
+	info->next = next;
+
+	return received;
+}
+
+static int dev_rcv_special(struct dev_info *hw_priv)
+{
+	int next;
+	union desc_stat status;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct net_device *dev = hw->port_info[0].pdev;
+	struct ksz_desc_info *info = &hw->rx_desc_info;
+	int left = info->alloc;
+	struct ksz_desc *desc;
+	int received = 0;
+
+	next = info->next;
+	while (left--) {
+		/* Get next descriptor which is not hardware owned. */
+		desc = &info->ring[next];
+		status.data = le32_to_cpu(desc->phw->ctrl.data);
+		if (status.rx.hw_owned)
+			break;
+
+		if (hw->dev_count > 1) {
+			/* Get received port number. */
+			int p = HW_TO_DEV_PORT(status.rx.src_port);
+
+			dev = hw->port_info[p].pdev;
+			if (!netif_running(dev))
+				goto release_packet;
+		}
+
+		/* Status valid only when last descriptor bit is set. */
+		if (status.rx.last_desc && status.rx.first_desc) {
+			/*
+			 * Receive without error.  With receive errors
+			 * disabled, packets with receive errors will be
+			 * dropped, so no need to check the error bit.
+			 */
+			if (!status.rx.error || (status.data &
+					KS_DESC_RX_ERROR_COND) ==
+					KS_DESC_RX_ERROR_TOO_LONG) {
+				if (rx_proc(dev, hw, desc, status))
+					goto release_packet;
+				received++;
+			} else {
+				struct dev_priv *priv = netdev_priv(dev);
+
+				/* Update receive error statistics. */
+				priv->port.counter[OID_COUNTER_RCV_ERROR]++;
+			}
+		}
+
+release_packet:
+		release_desc(desc);
+		next++;
+		next &= info->mask;
+	}
+	info->next = next;
+
+	return received;
+}
+
+static void rx_proc_task(unsigned long data)
+{
+	struct dev_info *hw_priv = (struct dev_info *) data;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	if (!hw->enabled)
+		return;
+	if (unlikely(!hw_priv->dev_rcv(hw_priv))) {
+
+		/* In case receive process is suspended because of overrun. */
+		hw_resume_rx(hw);
+
+		/* tasklets are interruptible. */
+		spin_lock_irq(&hw_priv->hwlock);
+		hw_turn_on_intr(hw, KS884X_INT_RX_MASK);
+		spin_unlock_irq(&hw_priv->hwlock);
+	} else {
+		hw_ack_intr(hw, KS884X_INT_RX);
+		tasklet_schedule(&hw_priv->rx_tasklet);
+	}
+}
+
+static void tx_proc_task(unsigned long data)
+{
+	struct dev_info *hw_priv = (struct dev_info *) data;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	hw_ack_intr(hw, KS884X_INT_TX_MASK);
+
+	tx_done(hw_priv);
+
+	/* tasklets are interruptible. */
+	spin_lock_irq(&hw_priv->hwlock);
+	hw_turn_on_intr(hw, KS884X_INT_TX);
+	spin_unlock_irq(&hw_priv->hwlock);
+}
+
+static inline void handle_rx_stop(struct ksz_hw *hw)
+{
+	/* Receive just has been stopped. */
+	if (0 == hw->rx_stop)
+		hw->intr_mask &= ~KS884X_INT_RX_STOPPED;
+	else if (hw->rx_stop > 1) {
+		if (hw->enabled && (hw->rx_cfg & DMA_RX_ENABLE)) {
+			hw_start_rx(hw);
+		} else {
+			hw->intr_mask &= ~KS884X_INT_RX_STOPPED;
+			hw->rx_stop = 0;
+		}
+	} else
+		/* Receive just has been started. */
+		hw->rx_stop++;
+}
+
+/**
+ * netdev_intr - interrupt handling
+ * @irq:	Interrupt number.
+ * @dev_id:	Network device.
+ *
+ * This function is called by upper network layer to signal interrupt.
+ *
+ * Return IRQ_HANDLED if interrupt is handled.
+ */
+static irqreturn_t netdev_intr(int irq, void *dev_id)
+{
+	uint int_enable = 0;
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	hw_read_intr(hw, &int_enable);
+
+	/* Not our interrupt! */
+	if (!int_enable)
+		return IRQ_NONE;
+
+	do {
+		hw_ack_intr(hw, int_enable);
+		int_enable &= hw->intr_mask;
+
+		if (unlikely(int_enable & KS884X_INT_TX_MASK)) {
+			hw_dis_intr_bit(hw, KS884X_INT_TX_MASK);
+			tasklet_schedule(&hw_priv->tx_tasklet);
+		}
+
+		if (likely(int_enable & KS884X_INT_RX)) {
+			hw_dis_intr_bit(hw, KS884X_INT_RX);
+			tasklet_schedule(&hw_priv->rx_tasklet);
+		}
+
+		if (unlikely(int_enable & KS884X_INT_RX_OVERRUN)) {
+			priv->stats.rx_fifo_errors++;
+			hw_resume_rx(hw);
+		}
+
+		if (unlikely(int_enable & KS884X_INT_PHY)) {
+			struct ksz_port *port = &priv->port;
+
+			hw->features |= LINK_INT_WORKING;
+			port_get_link_speed(port);
+		}
+
+		if (unlikely(int_enable & KS884X_INT_RX_STOPPED)) {
+			handle_rx_stop(hw);
+			break;
+		}
+
+		if (unlikely(int_enable & KS884X_INT_TX_STOPPED)) {
+			u32 data;
+
+			hw->intr_mask &= ~KS884X_INT_TX_STOPPED;
+			printk(KERN_INFO "Tx stopped\n");
+			data = readl(hw->io + KS_DMA_TX_CTRL);
+			if (!(data & DMA_TX_ENABLE))
+				printk(KERN_INFO "Tx disabled\n");
+			break;
+		}
+	} while (0);
+
+	hw_ena_intr(hw);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Linux network device functions
+ */
+
+static unsigned long next_jiffies;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void netdev_netpoll(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+
+	hw_dis_intr(&hw_priv->hw);
+	netdev_intr(dev->irq, dev);
+}
+#endif
+
+static void bridge_change(struct ksz_hw *hw)
+{
+	int port;
+	u8  member;
+	struct ksz_switch *sw = hw->ksz_switch;
+
+	/* No ports in forwarding state. */
+	if (!sw->member) {
+		port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE);
+		sw_block_addr(hw);
+	}
+	for (port = 0; port < SWITCH_PORT_NUM; port++) {
+		if (STP_STATE_FORWARDING == sw->port_cfg[port].stp_state)
+			member = HOST_MASK | sw->member;
+		else
+			member = HOST_MASK | (1 << port);
+		if (member != sw->port_cfg[port].member)
+			sw_cfg_port_base_vlan(hw, port, member);
+	}
+}
+
+/**
+ * netdev_close - close network device
+ * @dev:	Network device.
+ *
+ * This function process the close operation of network device.  This is caused
+ * by the user command "ifconfig ethX down."
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_close(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_port *port = &priv->port;
+	struct ksz_hw *hw = &hw_priv->hw;
+	int pi;
+
+	netif_stop_queue(dev);
+
+	ksz_stop_timer(&priv->monitor_timer_info);
+
+	/* Need to shut the port manually in multiple device interfaces mode. */
+	if (hw->dev_count > 1) {
+		port_set_stp_state(hw, port->first_port, STP_STATE_DISABLED);
+
+		/* Port is closed.  Need to change bridge setting. */
+		if (hw->features & STP_SUPPORT) {
+			pi = 1 << port->first_port;
+			if (hw->ksz_switch->member & pi) {
+				hw->ksz_switch->member &= ~pi;
+				bridge_change(hw);
+			}
+		}
+	}
+	if (port->first_port > 0)
+		hw_del_addr(hw, dev->dev_addr);
+	if (!hw_priv->wol_enable)
+		port_set_power_saving(port, true);
+
+	if (priv->multicast)
+		--hw->all_multi;
+	if (priv->promiscuous)
+		--hw->promiscuous;
+
+	hw_priv->opened--;
+	if (!(hw_priv->opened)) {
+		ksz_stop_timer(&hw_priv->mib_timer_info);
+		flush_work(&hw_priv->mib_read);
+
+		hw_dis_intr(hw);
+		hw_disable(hw);
+		hw_clr_multicast(hw);
+
+		/* Delay for receive task to stop scheduling itself. */
+		msleep(2000 / HZ);
+
+		tasklet_disable(&hw_priv->rx_tasklet);
+		tasklet_disable(&hw_priv->tx_tasklet);
+		free_irq(dev->irq, hw_priv->dev);
+
+		transmit_cleanup(hw_priv, 0);
+		hw_reset_pkts(&hw->rx_desc_info);
+		hw_reset_pkts(&hw->tx_desc_info);
+
+		/* Clean out static MAC table when the switch is shutdown. */
+		if (hw->features & STP_SUPPORT)
+			sw_clr_sta_mac_table(hw);
+	}
+
+	return 0;
+}
+
+static void hw_cfg_huge_frame(struct dev_info *hw_priv, struct ksz_hw *hw)
+{
+	if (hw->ksz_switch) {
+		u32 data;
+
+		data = readw(hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+		if (hw->features & RX_HUGE_FRAME)
+			data |= SWITCH_HUGE_PACKET;
+		else
+			data &= ~SWITCH_HUGE_PACKET;
+		writew(data, hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+	}
+	if (hw->features & RX_HUGE_FRAME) {
+		hw->rx_cfg |= DMA_RX_ERROR;
+		hw_priv->dev_rcv = dev_rcv_special;
+	} else {
+		hw->rx_cfg &= ~DMA_RX_ERROR;
+		if (hw->dev_count > 1)
+			hw_priv->dev_rcv = port_rcv_packets;
+		else
+			hw_priv->dev_rcv = dev_rcv_packets;
+	}
+}
+
+static int prepare_hardware(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	int rc = 0;
+
+	/* Remember the network device that requests interrupts. */
+	hw_priv->dev = dev;
+	rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev);
+	if (rc)
+		return rc;
+	tasklet_enable(&hw_priv->rx_tasklet);
+	tasklet_enable(&hw_priv->tx_tasklet);
+
+	hw->promiscuous = 0;
+	hw->all_multi = 0;
+	hw->multi_list_size = 0;
+
+	hw_reset(hw);
+
+	hw_set_desc_base(hw,
+		hw->tx_desc_info.ring_phys, hw->rx_desc_info.ring_phys);
+	hw_set_addr(hw);
+	hw_cfg_huge_frame(hw_priv, hw);
+	ksz_init_rx_buffers(hw_priv);
+	return 0;
+}
+
+/**
+ * netdev_open - open network device
+ * @dev:	Network device.
+ *
+ * This function process the open operation of network device.  This is caused
+ * by the user command "ifconfig ethX up."
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_open(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_port *port = &priv->port;
+	int i;
+	int p;
+	int rc = 0;
+
+	priv->multicast = 0;
+	priv->promiscuous = 0;
+
+	/* Reset device statistics. */
+	memset(&priv->stats, 0, sizeof(struct net_device_stats));
+	memset((void *) port->counter, 0,
+		(sizeof(u64) * OID_COUNTER_LAST));
+
+	if (!(hw_priv->opened)) {
+		rc = prepare_hardware(dev);
+		if (rc)
+			return rc;
+		for (i = 0; i < hw->mib_port_cnt; i++) {
+			if (next_jiffies < jiffies)
+				next_jiffies = jiffies + HZ * 2;
+			else
+				next_jiffies += HZ * 1;
+			hw_priv->counter[i].time = next_jiffies;
+			hw->port_mib[i].state = media_disconnected;
+			port_init_cnt(hw, i);
+		}
+		if (hw->ksz_switch)
+			hw->port_mib[HOST_PORT].state = media_connected;
+		else {
+			hw_add_wol_bcast(hw);
+			hw_cfg_wol_pme(hw, 0);
+			hw_clr_wol_pme_status(&hw_priv->hw);
+		}
+	}
+	port_set_power_saving(port, false);
+
+	for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+		/*
+		 * Initialize to invalid value so that link detection
+		 * is done.
+		 */
+		hw->port_info[p].partner = 0xFF;
+		hw->port_info[p].state = media_disconnected;
+	}
+
+	/* Need to open the port in multiple device interfaces mode. */
+	if (hw->dev_count > 1) {
+		port_set_stp_state(hw, port->first_port, STP_STATE_SIMPLE);
+		if (port->first_port > 0)
+			hw_add_addr(hw, dev->dev_addr);
+	}
+
+	port_get_link_speed(port);
+	if (port->force_link)
+		port_force_link_speed(port);
+	else
+		port_set_link_speed(port);
+
+	if (!(hw_priv->opened)) {
+		hw_setup_intr(hw);
+		hw_enable(hw);
+		hw_ena_intr(hw);
+
+		if (hw->mib_port_cnt)
+			ksz_start_timer(&hw_priv->mib_timer_info,
+				hw_priv->mib_timer_info.period);
+	}
+
+	hw_priv->opened++;
+
+	ksz_start_timer(&priv->monitor_timer_info,
+		priv->monitor_timer_info.period);
+
+	priv->media_state = port->linked->state;
+
+	if (media_connected == priv->media_state)
+		netif_carrier_on(dev);
+	else
+		netif_carrier_off(dev);
+	if (netif_msg_link(priv))
+		printk(KERN_INFO "%s link %s\n", dev->name,
+			(media_connected == priv->media_state ?
+			"on" : "off"));
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+/* RX errors = rx_errors */
+/* RX dropped = rx_dropped */
+/* RX overruns = rx_fifo_errors */
+/* RX frame = rx_crc_errors + rx_frame_errors + rx_length_errors */
+/* TX errors = tx_errors */
+/* TX dropped = tx_dropped */
+/* TX overruns = tx_fifo_errors */
+/* TX carrier = tx_aborted_errors + tx_carrier_errors + tx_window_errors */
+/* collisions = collisions */
+
+/**
+ * netdev_query_statistics - query network device statistics
+ * @dev:	Network device.
+ *
+ * This function returns the statistics of the network device.  The device
+ * needs not be opened.
+ *
+ * Return network device statistics.
+ */
+static struct net_device_stats *netdev_query_statistics(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct ksz_port *port = &priv->port;
+	struct ksz_hw *hw = &priv->adapter->hw;
+	struct ksz_port_mib *mib;
+	int i;
+	int p;
+
+	priv->stats.rx_errors = port->counter[OID_COUNTER_RCV_ERROR];
+	priv->stats.tx_errors = port->counter[OID_COUNTER_XMIT_ERROR];
+
+	/* Reset to zero to add count later. */
+	priv->stats.multicast = 0;
+	priv->stats.collisions = 0;
+	priv->stats.rx_length_errors = 0;
+	priv->stats.rx_crc_errors = 0;
+	priv->stats.rx_frame_errors = 0;
+	priv->stats.tx_window_errors = 0;
+
+	for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) {
+		mib = &hw->port_mib[p];
+
+		priv->stats.multicast += (unsigned long)
+			mib->counter[MIB_COUNTER_RX_MULTICAST];
+
+		priv->stats.collisions += (unsigned long)
+			mib->counter[MIB_COUNTER_TX_TOTAL_COLLISION];
+
+		priv->stats.rx_length_errors += (unsigned long)(
+			mib->counter[MIB_COUNTER_RX_UNDERSIZE] +
+			mib->counter[MIB_COUNTER_RX_FRAGMENT] +
+			mib->counter[MIB_COUNTER_RX_OVERSIZE] +
+			mib->counter[MIB_COUNTER_RX_JABBER]);
+		priv->stats.rx_crc_errors += (unsigned long)
+			mib->counter[MIB_COUNTER_RX_CRC_ERR];
+		priv->stats.rx_frame_errors += (unsigned long)(
+			mib->counter[MIB_COUNTER_RX_ALIGNMENT_ERR] +
+			mib->counter[MIB_COUNTER_RX_SYMBOL_ERR]);
+
+		priv->stats.tx_window_errors += (unsigned long)
+			mib->counter[MIB_COUNTER_TX_LATE_COLLISION];
+	}
+
+	return &priv->stats;
+}
+
+/**
+ * netdev_set_mac_address - set network device MAC address
+ * @dev:	Network device.
+ * @addr:	Buffer of MAC address.
+ *
+ * This function is used to set the MAC address of the network device.
+ *
+ * Return 0 to indicate success.
+ */
+static int netdev_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct sockaddr *mac = addr;
+	uint interrupt;
+
+	if (priv->port.first_port > 0)
+		hw_del_addr(hw, dev->dev_addr);
+	else {
+		hw->mac_override = 1;
+		memcpy(hw->override_addr, mac->sa_data, MAC_ADDR_LEN);
+	}
+
+	memcpy(dev->dev_addr, mac->sa_data, MAX_ADDR_LEN);
+
+	interrupt = hw_block_intr(hw);
+
+	if (priv->port.first_port > 0)
+		hw_add_addr(hw, dev->dev_addr);
+	else
+		hw_set_addr(hw);
+	hw_restore_intr(hw, interrupt);
+
+	return 0;
+}
+
+static void dev_set_promiscuous(struct net_device *dev, struct dev_priv *priv,
+	struct ksz_hw *hw, int promiscuous)
+{
+	if (promiscuous != priv->promiscuous) {
+		u8 prev_state = hw->promiscuous;
+
+		if (promiscuous)
+			++hw->promiscuous;
+		else
+			--hw->promiscuous;
+		priv->promiscuous = promiscuous;
+
+		/* Turn on/off promiscuous mode. */
+		if (hw->promiscuous <= 1 && prev_state <= 1)
+			hw_set_promiscuous(hw, hw->promiscuous);
+
+		/*
+		 * Port is not in promiscuous mode, meaning it is released
+		 * from the bridge.
+		 */
+		if ((hw->features & STP_SUPPORT) && !promiscuous &&
+				dev->br_port) {
+			struct ksz_switch *sw = hw->ksz_switch;
+			int port = priv->port.first_port;
+
+			port_set_stp_state(hw, port, STP_STATE_DISABLED);
+			port = 1 << port;
+			if (sw->member & port) {
+				sw->member &= ~port;
+				bridge_change(hw);
+			}
+		}
+	}
+}
+
+static void dev_set_multicast(struct dev_priv *priv, struct ksz_hw *hw,
+	int multicast)
+{
+	if (multicast != priv->multicast) {
+		u8 all_multi = hw->all_multi;
+
+		if (multicast)
+			++hw->all_multi;
+		else
+			--hw->all_multi;
+		priv->multicast = multicast;
+
+		/* Turn on/off all multicast mode. */
+		if (hw->all_multi <= 1 && all_multi <= 1)
+			hw_set_multicast(hw, hw->all_multi);
+	}
+}
+
+/**
+ * netdev_set_rx_mode
+ * @dev:	Network device.
+ *
+ * This routine is used to set multicast addresses or put the network device
+ * into promiscuous mode.
+ */
+static void netdev_set_rx_mode(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct dev_mc_list *mc_ptr;
+	int multicast = (dev->flags & IFF_ALLMULTI);
+
+	dev_set_promiscuous(dev, priv, hw, (dev->flags & IFF_PROMISC));
+
+	if (hw_priv->hw.dev_count > 1)
+		multicast |= (dev->flags & IFF_MULTICAST);
+	dev_set_multicast(priv, hw, multicast);
+
+	/* Cannot use different hashes in multiple device interfaces mode. */
+	if (hw_priv->hw.dev_count > 1)
+		return;
+
+	if ((dev->flags & IFF_MULTICAST) && dev->mc_count) {
+		int i = 0;
+
+		/* List too big to support so turn on all multicast mode. */
+		if (dev->mc_count > MAX_MULTICAST_LIST) {
+			if (MAX_MULTICAST_LIST != hw->multi_list_size) {
+				hw->multi_list_size = MAX_MULTICAST_LIST;
+				++hw->all_multi;
+				hw_set_multicast(hw, hw->all_multi);
+			}
+			return;
+		}
+
+		for (mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+			if (!(*mc_ptr->dmi_addr & 1))
+				continue;
+			if (i >= MAX_MULTICAST_LIST)
+				break;
+			memcpy(hw->multi_list[i++], mc_ptr->dmi_addr,
+				MAC_ADDR_LEN);
+		}
+		hw->multi_list_size = (u8) i;
+		hw_set_grp_addr(hw);
+	} else {
+		if (MAX_MULTICAST_LIST == hw->multi_list_size) {
+			--hw->all_multi;
+			hw_set_multicast(hw, hw->all_multi);
+		}
+		hw->multi_list_size = 0;
+		hw_clr_multicast(hw);
+	}
+}
+
+static int netdev_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	int hw_mtu;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	/* Cannot use different MTU in multiple device interfaces mode. */
+	if (hw->dev_count > 1)
+		if (dev != hw_priv->dev)
+			return 0;
+	if (new_mtu < 60)
+		return -EINVAL;
+
+	if (dev->mtu != new_mtu) {
+		hw_mtu = new_mtu + ETHERNET_HEADER_SIZE + 4;
+		if (hw_mtu > MAX_RX_BUF_SIZE)
+			return -EINVAL;
+		if (hw_mtu > REGULAR_RX_BUF_SIZE) {
+			hw->features |= RX_HUGE_FRAME;
+			hw_mtu = MAX_RX_BUF_SIZE;
+		} else {
+			hw->features &= ~RX_HUGE_FRAME;
+			hw_mtu = REGULAR_RX_BUF_SIZE;
+		}
+		hw_mtu = (hw_mtu + 3) & ~3;
+		hw_priv->mtu = hw_mtu;
+		dev->mtu = new_mtu;
+	}
+	return 0;
+}
+
+/**
+ * netdev_ioctl - I/O control processing
+ * @dev:	Network device.
+ * @ifr:	Interface request structure.
+ * @cmd:	I/O control code.
+ *
+ * This function is used to process I/O control calls.
+ *
+ * Return 0 to indicate success.
+ */
+static int netdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_port *port = &priv->port;
+	int rc;
+	int result = 0;
+	struct mii_ioctl_data *data = if_mii(ifr);
+
+	if (down_interruptible(&priv->proc_sem))
+		return -ERESTARTSYS;
+
+	/* assume success */
+	rc = 0;
+	switch (cmd) {
+	/* Get address of MII PHY in use. */
+	case SIOCGMIIPHY:
+		data->phy_id = priv->id;
+
+		/* Fallthrough... */
+
+	/* Read MII PHY register. */
+	case SIOCGMIIREG:
+		if (data->phy_id != priv->id || data->reg_num >= 6)
+			result = -EIO;
+		else
+			hw_r_phy(hw, port->linked->port_id, data->reg_num,
+				&data->val_out);
+		break;
+
+	/* Write MII PHY register. */
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			result = -EPERM;
+		else if (data->phy_id != priv->id || data->reg_num >= 6)
+			result = -EIO;
+		else
+			hw_w_phy(hw, port->linked->port_id, data->reg_num,
+				data->val_in);
+		break;
+
+	default:
+		result = -EOPNOTSUPP;
+	}
+
+	up(&priv->proc_sem);
+
+	return result;
+}
+
+/*
+ * MII support
+ */
+
+/**
+ * mdio_read - read PHY register
+ * @dev:	Network device.
+ * @phy_id:	The PHY id.
+ * @reg_num:	The register number.
+ *
+ * This function returns the PHY register value.
+ *
+ * Return the register value.
+ */
+static int mdio_read(struct net_device *dev, int phy_id, int reg_num)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct ksz_port *port = &priv->port;
+	struct ksz_hw *hw = port->hw;
+	u16 val_out;
+
+	hw_r_phy(hw, port->linked->port_id, reg_num << 1, &val_out);
+	return val_out;
+}
+
+/**
+ * mdio_write - set PHY register
+ * @dev:	Network device.
+ * @phy_id:	The PHY id.
+ * @reg_num:	The register number.
+ * @val:	The register value.
+ *
+ * This procedure sets the PHY register value.
+ */
+static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct ksz_port *port = &priv->port;
+	struct ksz_hw *hw = port->hw;
+	int i;
+	int pi;
+
+	for (i = 0, pi = port->first_port; i < port->port_cnt; i++, pi++)
+		hw_w_phy(hw, pi, reg_num << 1, val);
+}
+
+/*
+ * ethtool support
+ */
+
+#define EEPROM_SIZE			0x40
+
+static u16 eeprom_data[EEPROM_SIZE] = { 0 };
+
+#define ADVERTISED_ALL			\
+	(ADVERTISED_10baseT_Half |	\
+	ADVERTISED_10baseT_Full |	\
+	ADVERTISED_100baseT_Half |	\
+	ADVERTISED_100baseT_Full)
+
+/* These functions use the MII functions in mii.c. */
+
+/**
+ * netdev_get_settings - get network device settings
+ * @dev:	Network device.
+ * @cmd:	Ethtool command.
+ *
+ * This function queries the PHY and returns its state in the ethtool command.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+
+	mutex_lock(&hw_priv->lock);
+	mii_ethtool_gset(&priv->mii_if, cmd);
+	cmd->advertising |= SUPPORTED_TP;
+	mutex_unlock(&hw_priv->lock);
+
+	/* Save advertised settings for workaround in next function. */
+	priv->advertising = cmd->advertising;
+	return 0;
+}
+
+/**
+ * netdev_set_settings - set network device settings
+ * @dev:	Network device.
+ * @cmd:	Ethtool command.
+ *
+ * This function sets the PHY according to the ethtool command.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_port *port = &priv->port;
+	int rc;
+
+	/*
+	 * ethtool utility does not change advertised setting if auto
+	 * negotiation is not specified explicitly.
+	 */
+	if (cmd->autoneg && priv->advertising == cmd->advertising) {
+		cmd->advertising |= ADVERTISED_ALL;
+		if (10 == cmd->speed)
+			cmd->advertising &=
+				~(ADVERTISED_100baseT_Full |
+				ADVERTISED_100baseT_Half);
+		else if (100 == cmd->speed)
+			cmd->advertising &=
+				~(ADVERTISED_10baseT_Full |
+				ADVERTISED_10baseT_Half);
+		if (0 == cmd->duplex)
+			cmd->advertising &=
+				~(ADVERTISED_100baseT_Full |
+				ADVERTISED_10baseT_Full);
+		else if (1 == cmd->duplex)
+			cmd->advertising &=
+				~(ADVERTISED_100baseT_Half |
+				ADVERTISED_10baseT_Half);
+	}
+	mutex_lock(&hw_priv->lock);
+	if (cmd->autoneg &&
+			(cmd->advertising & ADVERTISED_ALL) ==
+			ADVERTISED_ALL) {
+		port->duplex = 0;
+		port->speed = 0;
+		port->force_link = 0;
+	} else {
+		port->duplex = cmd->duplex + 1;
+		if (cmd->speed != 1000)
+			port->speed = cmd->speed;
+		if (cmd->autoneg)
+			port->force_link = 0;
+		else
+			port->force_link = 1;
+	}
+	rc = mii_ethtool_sset(&priv->mii_if, cmd);
+	mutex_unlock(&hw_priv->lock);
+	return rc;
+}
+
+/**
+ * netdev_nway_reset - restart auto-negotiation
+ * @dev:	Network device.
+ *
+ * This function restarts the PHY for auto-negotiation.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_nway_reset(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	int rc;
+
+	mutex_lock(&hw_priv->lock);
+	rc = mii_nway_restart(&priv->mii_if);
+	mutex_unlock(&hw_priv->lock);
+	return rc;
+}
+
+/**
+ * netdev_get_link - get network device link status
+ * @dev:	Network device.
+ *
+ * This function gets the link status from the PHY.
+ *
+ * Return true if PHY is linked and false otherwise.
+ */
+static u32 netdev_get_link(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	int rc;
+
+	rc = mii_link_ok(&priv->mii_if);
+	return rc;
+}
+
+/**
+ * netdev_get_drvinfo - get network driver information
+ * @dev:	Network device.
+ * @info:	Ethtool driver info data structure.
+ *
+ * This procedure returns the driver information.
+ */
+static void netdev_get_drvinfo(struct net_device *dev,
+	struct ethtool_drvinfo *info)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(hw_priv->pdev));
+}
+
+/**
+ * netdev_get_regs_len - get length of register dump
+ * @dev:	Network device.
+ *
+ * This function returns the length of the register dump.
+ *
+ * Return length of the register dump.
+ */
+static struct hw_regs {
+	int start;
+	int end;
+} hw_regs_range[] = {
+	{ KS_DMA_TX_CTRL,	KS884X_INTERRUPTS_STATUS },
+	{ KS_ADD_ADDR_0_LO,	KS_ADD_ADDR_F_HI },
+	{ KS884X_ADDR_0_OFFSET,	KS8841_WOL_FRAME_BYTE2_OFFSET },
+	{ KS884X_SIDER_P,	KS8842_SGCR7_P },
+	{ KS8842_MACAR1_P,	KS8842_TOSR8_P },
+	{ KS884X_P1MBCR_P,	KS8842_P3ERCR_P },
+	{ 0, 0 }
+};
+
+static int netdev_get_regs_len(struct net_device *dev)
+{
+	struct hw_regs *range = hw_regs_range;
+	int regs_len = 0x10 * sizeof(u32);
+
+	while (range->end > range->start) {
+		regs_len += (range->end - range->start + 3) / 4 * 4;
+		range++;
+	}
+	return regs_len;
+}
+
+/**
+ * netdev_get_regs - get register dump
+ * @dev:	Network device.
+ * @regs:	Ethtool registers data structure.
+ * @ptr:	Buffer to store the register values.
+ *
+ * This procedure dumps the register values in the provided buffer.
+ */
+static void netdev_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+	void *ptr)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	int *buf = (int *) ptr;
+	struct hw_regs *range = hw_regs_range;
+	int len;
+
+	mutex_lock(&hw_priv->lock);
+	regs->version = 0;
+	for (len = 0; len < 0x40; len += 4) {
+		pci_read_config_dword(hw_priv->pdev, len, buf);
+		buf++;
+	}
+	while (range->end > range->start) {
+		for (len = range->start; len < range->end; len += 4) {
+			*buf = readl(hw->io + len);
+			buf++;
+		}
+		range++;
+	}
+	mutex_unlock(&hw_priv->lock);
+}
+
+#define WOL_SUPPORT			\
+	(WAKE_PHY | WAKE_MAGIC |	\
+	WAKE_UCAST | WAKE_MCAST |	\
+	WAKE_BCAST | WAKE_ARP)
+
+/**
+ * netdev_get_wol - get Wake-on-LAN support
+ * @dev:	Network device.
+ * @wol:	Ethtool Wake-on-LAN data structure.
+ *
+ * This procedure returns Wake-on-LAN support.
+ */
+static void netdev_get_wol(struct net_device *dev,
+	struct ethtool_wolinfo *wol)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+
+	wol->supported = hw_priv->wol_support;
+	wol->wolopts = hw_priv->wol_enable;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+/**
+ * netdev_set_wol - set Wake-on-LAN support
+ * @dev:	Network device.
+ * @wol:	Ethtool Wake-on-LAN data structure.
+ *
+ * This function sets Wake-on-LAN support.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_wol(struct net_device *dev,
+	struct ethtool_wolinfo *wol)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+
+	/* Need to find a way to retrieve the device IP address. */
+	u8 net_addr[] = { 192, 168, 1, 1 };
+
+	if (wol->wolopts & ~hw_priv->wol_support)
+		return -EINVAL;
+
+	hw_priv->wol_enable = wol->wolopts;
+
+	/* Link wakeup cannot really be disabled. */
+	if (wol->wolopts)
+		hw_priv->wol_enable |= WAKE_PHY;
+	hw_enable_wol(&hw_priv->hw, hw_priv->wol_enable, net_addr);
+	return 0;
+}
+
+/**
+ * netdev_get_msglevel - get debug message level
+ * @dev:	Network device.
+ *
+ * This function returns current debug message level.
+ *
+ * Return current debug message flags.
+ */
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+
+	return priv->msg_enable;
+}
+
+/**
+ * netdev_set_msglevel - set debug message level
+ * @dev:	Network device.
+ * @value:	Debug message flags.
+ *
+ * This procedure sets debug message level.
+ */
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+
+	priv->msg_enable = value;
+}
+
+/**
+ * netdev_get_eeprom_len - get EEPROM length
+ * @dev:	Network device.
+ *
+ * This function returns the length of the EEPROM.
+ *
+ * Return length of the EEPROM.
+ */
+static int netdev_get_eeprom_len(struct net_device *dev)
+{
+	return EEPROM_SIZE * 2;
+}
+
+/**
+ * netdev_get_eeprom - get EEPROM data
+ * @dev:	Network device.
+ * @eeprom:	Ethtool EEPROM data structure.
+ * @data:	Buffer to store the EEPROM data.
+ *
+ * This function dumps the EEPROM data in the provided buffer.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+#define EEPROM_MAGIC			0x10A18842
+
+static int netdev_get_eeprom(struct net_device *dev,
+	struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	u8 *eeprom_byte = (u8 *) eeprom_data;
+	int i;
+	int len;
+
+	len = (eeprom->offset + eeprom->len + 1) / 2;
+	for (i = eeprom->offset / 2; i < len; i++)
+		eeprom_data[i] = eeprom_read(&hw_priv->hw, i);
+	eeprom->magic = EEPROM_MAGIC;
+	memcpy(data, &eeprom_byte[eeprom->offset], eeprom->len);
+
+	return 0;
+}
+
+/**
+ * netdev_set_eeprom - write EEPROM data
+ * @dev:	Network device.
+ * @eeprom:	Ethtool EEPROM data structure.
+ * @data:	Data buffer.
+ *
+ * This function modifies the EEPROM data one byte at a time.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_eeprom(struct net_device *dev,
+	struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	u16 eeprom_word[EEPROM_SIZE];
+	u8 *eeprom_byte = (u8 *) eeprom_word;
+	int i;
+	int len;
+
+	if (eeprom->magic != EEPROM_MAGIC)
+		return 1;
+
+	len = (eeprom->offset + eeprom->len + 1) / 2;
+	for (i = eeprom->offset / 2; i < len; i++)
+		eeprom_data[i] = eeprom_read(&hw_priv->hw, i);
+	memcpy(eeprom_word, eeprom_data, EEPROM_SIZE * 2);
+	memcpy(&eeprom_byte[eeprom->offset], data, eeprom->len);
+	for (i = 0; i < EEPROM_SIZE; i++)
+		if (eeprom_word[i] != eeprom_data[i]) {
+			eeprom_data[i] = eeprom_word[i];
+			eeprom_write(&hw_priv->hw, i, eeprom_data[i]);
+	}
+
+	return 0;
+}
+
+/**
+ * netdev_get_pauseparam - get flow control parameters
+ * @dev:	Network device.
+ * @pause:	Ethtool PAUSE settings data structure.
+ *
+ * This procedure returns the PAUSE control flow settings.
+ */
+static void netdev_get_pauseparam(struct net_device *dev,
+	struct ethtool_pauseparam *pause)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	pause->autoneg = (hw->overrides & PAUSE_FLOW_CTRL) ? 0 : 1;
+	if (!hw->ksz_switch) {
+		pause->rx_pause =
+			(hw->rx_cfg & DMA_RX_FLOW_ENABLE) ? 1 : 0;
+		pause->tx_pause =
+			(hw->tx_cfg & DMA_TX_FLOW_ENABLE) ? 1 : 0;
+	} else {
+		pause->rx_pause =
+			(sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+				SWITCH_RX_FLOW_CTRL)) ? 1 : 0;
+		pause->tx_pause =
+			(sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+				SWITCH_TX_FLOW_CTRL)) ? 1 : 0;
+	}
+}
+
+/**
+ * netdev_set_pauseparam - set flow control parameters
+ * @dev:	Network device.
+ * @pause:	Ethtool PAUSE settings data structure.
+ *
+ * This function sets the PAUSE control flow settings.
+ * Not implemented yet.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_pauseparam(struct net_device *dev,
+	struct ethtool_pauseparam *pause)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_port *port = &priv->port;
+
+	mutex_lock(&hw_priv->lock);
+	if (pause->autoneg) {
+		if (!pause->rx_pause && !pause->tx_pause)
+			port->flow_ctrl = PHY_NO_FLOW_CTRL;
+		else
+			port->flow_ctrl = PHY_FLOW_CTRL;
+		hw->overrides &= ~PAUSE_FLOW_CTRL;
+		port->force_link = 0;
+		if (hw->ksz_switch) {
+			sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+				SWITCH_RX_FLOW_CTRL, 1);
+			sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+				SWITCH_TX_FLOW_CTRL, 1);
+		}
+		port_set_link_speed(port);
+	} else {
+		hw->overrides |= PAUSE_FLOW_CTRL;
+		if (hw->ksz_switch) {
+			sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+				SWITCH_RX_FLOW_CTRL, pause->rx_pause);
+			sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+				SWITCH_TX_FLOW_CTRL, pause->tx_pause);
+		} else
+			set_flow_ctrl(hw, pause->rx_pause, pause->tx_pause);
+	}
+	mutex_unlock(&hw_priv->lock);
+
+	return 0;
+}
+
+/**
+ * netdev_get_ringparam - get tx/rx ring parameters
+ * @dev:	Network device.
+ * @pause:	Ethtool RING settings data structure.
+ *
+ * This procedure returns the TX/RX ring settings.
+ */
+static void netdev_get_ringparam(struct net_device *dev,
+	struct ethtool_ringparam *ring)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	ring->tx_max_pending = (1 << 9);
+	ring->tx_pending = hw->tx_desc_info.alloc;
+	ring->rx_max_pending = (1 << 9);
+	ring->rx_pending = hw->rx_desc_info.alloc;
+}
+
+#define STATS_LEN			(TOTAL_PORT_COUNTER_NUM)
+
+static struct {
+	char string[ETH_GSTRING_LEN];
+} ethtool_stats_keys[STATS_LEN] = {
+	{ "rx_lo_priority_octets" },
+	{ "rx_hi_priority_octets" },
+	{ "rx_undersize_packets" },
+	{ "rx_fragments" },
+	{ "rx_oversize_packets" },
+	{ "rx_jabbers" },
+	{ "rx_symbol_errors" },
+	{ "rx_crc_errors" },
+	{ "rx_align_errors" },
+	{ "rx_mac_ctrl_packets" },
+	{ "rx_pause_packets" },
+	{ "rx_bcast_packets" },
+	{ "rx_mcast_packets" },
+	{ "rx_ucast_packets" },
+	{ "rx_64_or_less_octet_packets" },
+	{ "rx_65_to_127_octet_packets" },
+	{ "rx_128_to_255_octet_packets" },
+	{ "rx_256_to_511_octet_packets" },
+	{ "rx_512_to_1023_octet_packets" },
+	{ "rx_1024_to_1522_octet_packets" },
+
+	{ "tx_lo_priority_octets" },
+	{ "tx_hi_priority_octets" },
+	{ "tx_late_collisions" },
+	{ "tx_pause_packets" },
+	{ "tx_bcast_packets" },
+	{ "tx_mcast_packets" },
+	{ "tx_ucast_packets" },
+	{ "tx_deferred" },
+	{ "tx_total_collisions" },
+	{ "tx_excessive_collisions" },
+	{ "tx_single_collisions" },
+	{ "tx_mult_collisions" },
+
+	{ "rx_discards" },
+	{ "tx_discards" },
+};
+
+/**
+ * netdev_get_strings - get statistics identity strings
+ * @dev:	Network device.
+ * @stringset:	String set identifier.
+ * @buf:	Buffer to store the strings.
+ *
+ * This procedure returns the strings used to identify the statistics.
+ */
+static void netdev_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	if (ETH_SS_STATS == stringset)
+		memcpy(buf, &ethtool_stats_keys,
+			ETH_GSTRING_LEN * hw->mib_cnt);
+}
+
+/**
+ * netdev_get_sset_count - get statistics size
+ * @dev:	Network device.
+ * @sset:	The statistics set number.
+ *
+ * This function returns the size of the statistics to be reported.
+ *
+ * Return size of the statistics to be reported.
+ */
+static int netdev_get_sset_count(struct net_device *dev, int sset)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	switch (sset) {
+	case ETH_SS_STATS:
+		return hw->mib_cnt;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/**
+ * netdev_get_ethtool_stats - get network device statistics
+ * @dev:	Network device.
+ * @stats:	Ethtool statistics data structure.
+ * @data:	Buffer to store the statistics.
+ *
+ * This procedure returns the statistics.
+ */
+static void netdev_get_ethtool_stats(struct net_device *dev,
+	struct ethtool_stats *stats, u64 *data)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_port *port = &priv->port;
+	int n_stats = stats->n_stats;
+	int i;
+	int n;
+	int p;
+	int rc;
+	u64 counter[TOTAL_PORT_COUNTER_NUM];
+
+	mutex_lock(&hw_priv->lock);
+	n = SWITCH_PORT_NUM;
+	for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) {
+		if (media_connected == hw->port_mib[p].state) {
+			hw_priv->counter[p].read = 1;
+
+			/* Remember first port that requests read. */
+			if (n == SWITCH_PORT_NUM)
+				n = p;
+		}
+	}
+	mutex_unlock(&hw_priv->lock);
+
+	if (n < SWITCH_PORT_NUM)
+		schedule_work(&hw_priv->mib_read);
+
+	if (1 == port->mib_port_cnt && n < SWITCH_PORT_NUM) {
+		p = n;
+		rc = wait_event_interruptible_timeout(
+			hw_priv->counter[p].counter,
+			2 == hw_priv->counter[p].read,
+			HZ * 1);
+	} else
+		for (i = 0, p = n; i < port->mib_port_cnt - n; i++, p++) {
+			if (0 == i) {
+				rc = wait_event_interruptible_timeout(
+					hw_priv->counter[p].counter,
+					2 == hw_priv->counter[p].read,
+					HZ * 2);
+			} else if (hw->port_mib[p].cnt_ptr) {
+				rc = wait_event_interruptible_timeout(
+					hw_priv->counter[p].counter,
+					2 == hw_priv->counter[p].read,
+					HZ * 1);
+			}
+		}
+
+	get_mib_counters(hw, port->first_port, port->mib_port_cnt, counter);
+	n = hw->mib_cnt;
+	if (n > n_stats)
+		n = n_stats;
+	n_stats -= n;
+	for (i = 0; i < n; i++)
+		*data++ = counter[i];
+}
+
+/**
+ * netdev_get_rx_csum - get receive checksum support
+ * @dev:	Network device.
+ *
+ * This function gets receive checksum support setting.
+ *
+ * Return true if receive checksum is enabled; false otherwise.
+ */
+static u32 netdev_get_rx_csum(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	return hw->rx_cfg &
+		(DMA_RX_CSUM_UDP |
+		DMA_RX_CSUM_TCP |
+		DMA_RX_CSUM_IP);
+}
+
+/**
+ * netdev_set_rx_csum - set receive checksum support
+ * @dev:	Network device.
+ * @data:	Zero to disable receive checksum support.
+ *
+ * This function sets receive checksum support setting.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_rx_csum(struct net_device *dev, u32 data)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	u32 new_setting = hw->rx_cfg;
+
+	if (data)
+		new_setting |=
+			(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
+			DMA_RX_CSUM_IP);
+	else
+		new_setting &=
+			~(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
+			DMA_RX_CSUM_IP);
+	new_setting &= ~DMA_RX_CSUM_UDP;
+	mutex_lock(&hw_priv->lock);
+	if (new_setting != hw->rx_cfg) {
+		hw->rx_cfg = new_setting;
+		if (hw->enabled)
+			writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+	}
+	mutex_unlock(&hw_priv->lock);
+	return 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+	.get_settings		= netdev_get_settings,
+	.set_settings		= netdev_set_settings,
+	.nway_reset		= netdev_nway_reset,
+	.get_link		= netdev_get_link,
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_regs_len		= netdev_get_regs_len,
+	.get_regs		= netdev_get_regs,
+	.get_wol		= netdev_get_wol,
+	.set_wol		= netdev_set_wol,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+	.get_eeprom_len		= netdev_get_eeprom_len,
+	.get_eeprom		= netdev_get_eeprom,
+	.set_eeprom		= netdev_set_eeprom,
+	.get_pauseparam		= netdev_get_pauseparam,
+	.set_pauseparam		= netdev_set_pauseparam,
+	.get_ringparam		= netdev_get_ringparam,
+	.get_strings		= netdev_get_strings,
+	.get_sset_count		= netdev_get_sset_count,
+	.get_ethtool_stats	= netdev_get_ethtool_stats,
+	.get_rx_csum		= netdev_get_rx_csum,
+	.set_rx_csum		= netdev_set_rx_csum,
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.set_tx_csum		= ethtool_op_set_tx_csum,
+	.get_sg			= ethtool_op_get_sg,
+	.set_sg			= ethtool_op_set_sg,
+};
+
+/*
+ * Hardware monitoring
+ */
+
+static void update_link(struct net_device *dev, struct dev_priv *priv,
+	struct ksz_port *port)
+{
+	if (priv->media_state != port->linked->state) {
+		priv->media_state = port->linked->state;
+		if (netif_running(dev)) {
+			if (media_connected == priv->media_state)
+				netif_carrier_on(dev);
+			else
+				netif_carrier_off(dev);
+			if (netif_msg_link(priv))
+				printk(KERN_INFO "%s link %s\n", dev->name,
+					(media_connected == priv->media_state ?
+					"on" : "off"));
+		}
+	}
+}
+
+static void mib_read_work(struct work_struct *work)
+{
+	struct dev_info *hw_priv =
+		container_of(work, struct dev_info, mib_read);
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_port_mib *mib;
+	int i;
+
+	next_jiffies = jiffies;
+	for (i = 0; i < hw->mib_port_cnt; i++) {
+		mib = &hw->port_mib[i];
+
+		/* Reading MIB counters or requested to read. */
+		if (mib->cnt_ptr || 1 == hw_priv->counter[i].read) {
+
+			/* Need to process receive interrupt. */
+			if (port_r_cnt(hw, i))
+				break;
+			hw_priv->counter[i].read = 0;
+
+			/* Finish reading counters. */
+			if (0 == mib->cnt_ptr) {
+				hw_priv->counter[i].read = 2;
+				wake_up_interruptible(
+					&hw_priv->counter[i].counter);
+			}
+		} else if (jiffies >= hw_priv->counter[i].time) {
+			/* Only read MIB counters when the port is connected. */
+			if (media_connected == mib->state)
+				hw_priv->counter[i].read = 1;
+			next_jiffies += HZ * 1 * hw->mib_port_cnt;
+			hw_priv->counter[i].time = next_jiffies;
+
+		/* Port is just disconnected. */
+		} else if (mib->link_down) {
+			mib->link_down = 0;
+
+			/* Read counters one last time after link is lost. */
+			hw_priv->counter[i].read = 1;
+		}
+	}
+}
+
+static void mib_monitor(unsigned long ptr)
+{
+	struct dev_info *hw_priv = (struct dev_info *) ptr;
+
+	mib_read_work(&hw_priv->mib_read);
+
+	/* This is used to verify Wake-on-LAN is working. */
+	if (hw_priv->pme_wait) {
+		if (hw_priv->pme_wait <= jiffies) {
+			hw_clr_wol_pme_status(&hw_priv->hw);
+			hw_priv->pme_wait = 0;
+		}
+	} else if (hw_chk_wol_pme_status(&hw_priv->hw)) {
+
+		/* PME is asserted.  Wait 2 seconds to clear it. */
+		hw_priv->pme_wait = jiffies + HZ * 2;
+	}
+
+	ksz_update_timer(&hw_priv->mib_timer_info);
+}
+
+/**
+ * dev_monitor - periodic monitoring
+ * @ptr:	Network device pointer.
+ *
+ * This routine is run in a kernel timer to monitor the network device.
+ */
+static void dev_monitor(unsigned long ptr)
+{
+	struct net_device *dev = (struct net_device *) ptr;
+	struct dev_priv *priv = netdev_priv(dev);
+	struct dev_info *hw_priv = priv->adapter;
+	struct ksz_hw *hw = &hw_priv->hw;
+	struct ksz_port *port = &priv->port;
+
+	if (!(hw->features & LINK_INT_WORKING))
+		port_get_link_speed(port);
+	update_link(dev, priv, port);
+
+	ksz_update_timer(&priv->monitor_timer_info);
+}
+
+/*
+ * Linux network device interface functions
+ */
+
+/* Driver exported variables */
+
+static int msg_enable;
+
+static char *macaddr = ":";
+static char *mac1addr = ":";
+
+/*
+ * This enables multiple network device mode for KSZ8842, which contains a
+ * switch with two physical ports.  Some users like to take control of the
+ * ports for running Spanning Tree Protocol.  The driver will create an
+ * additional eth? device for the other port.
+ *
+ * Some limitations are the network devices cannot have different MTU and
+ * multicast hash tables.
+ */
+static int multi_dev;
+
+/*
+ * As most users select multiple network device mode to use Spanning Tree
+ * Protocol, this enables a feature in which most unicast and multicast packets
+ * are forwarded inside the switch and not passed to the host.  Only packets
+ * that need the host's attention are passed to it.  This prevents the host
+ * wasting CPU time to examine each and every incoming packets and do the
+ * forwarding itself.
+ *
+ * As the hack requires the private bridge header, the driver cannot compile
+ * with just the kernel headers.
+ *
+ * Enabling STP support also turns on multiple network device mode.
+ */
+static int stp;
+
+/*
+ * This enables fast aging in the KSZ8842 switch.  Not sure what situation
+ * needs that.  However, fast aging is used to flush the dynamic MAC table when
+ * STP suport is enabled.
+ */
+static int fast_aging;
+
+/**
+ * netdev_init - initalize network device.
+ * @dev:	Network device.
+ *
+ * This function initializes the network device.
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int __init netdev_init(struct net_device *dev)
+{
+	struct dev_priv *priv = netdev_priv(dev);
+
+	/* 500 ms timeout */
+	ksz_init_timer(&priv->monitor_timer_info, 500 * HZ / 1000,
+		dev_monitor, dev);
+
+	/* 500 ms timeout */
+	dev->watchdog_timeo = HZ / 2;
+
+	dev->features |= NETIF_F_IP_CSUM;
+
+	/*
+	 * Hardware does not really support IPv6 checksum generation, but
+	 * driver actually runs faster with this on.  Refer IPV6_CSUM_GEN_HACK.
+	 */
+	dev->features |= NETIF_F_IPV6_CSUM;
+	dev->features |= NETIF_F_SG;
+
+	sema_init(&priv->proc_sem, 1);
+
+	priv->mii_if.phy_id_mask = 0x1;
+	priv->mii_if.reg_num_mask = 0x7;
+	priv->mii_if.dev = dev;
+	priv->mii_if.mdio_read = mdio_read;
+	priv->mii_if.mdio_write = mdio_write;
+	priv->mii_if.phy_id = priv->port.first_port + 1;
+
+	priv->msg_enable = netif_msg_init(msg_enable,
+		(NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK));
+
+	return 0;
+}
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_init		= netdev_init,
+	.ndo_open		= netdev_open,
+	.ndo_stop		= netdev_close,
+	.ndo_get_stats		= netdev_query_statistics,
+	.ndo_start_xmit		= netdev_tx,
+	.ndo_tx_timeout		= netdev_tx_timeout,
+	.ndo_change_mtu		= netdev_change_mtu,
+	.ndo_set_mac_address	= netdev_set_mac_address,
+	.ndo_do_ioctl		= netdev_ioctl,
+	.ndo_set_rx_mode	= netdev_set_rx_mode,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= netdev_netpoll,
+#endif
+};
+
+static void netdev_free(struct net_device *dev)
+{
+	if (dev->watchdog_timeo)
+		unregister_netdev(dev);
+
+	free_netdev(dev);
+}
+
+struct platform_info {
+	struct dev_info dev_info;
+	struct net_device *netdev[SWITCH_PORT_NUM];
+};
+
+static int net_device_present;
+
+static void get_mac_addr(struct dev_info *hw_priv, u8 *macaddr, int port)
+{
+	int i;
+	int j;
+	int got_num;
+	int num;
+
+	i = j = num = got_num = 0;
+	while (j < MAC_ADDR_LEN) {
+		if (macaddr[i]) {
+			got_num = 1;
+			if ('0' <= macaddr[i] && macaddr[i] <= '9')
+				num = num * 16 + macaddr[i] - '0';
+			else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
+				num = num * 16 + 10 + macaddr[i] - 'A';
+			else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
+				num = num * 16 + 10 + macaddr[i] - 'a';
+			else if (':' == macaddr[i])
+				got_num = 2;
+			else
+				break;
+		} else if (got_num)
+			got_num = 2;
+		else
+			break;
+		if (2 == got_num) {
+			if (MAIN_PORT == port) {
+				hw_priv->hw.override_addr[j++] = (u8) num;
+				hw_priv->hw.override_addr[5] +=
+					hw_priv->hw.id;
+			} else {
+				hw_priv->hw.ksz_switch->other_addr[j++] =
+					(u8) num;
+				hw_priv->hw.ksz_switch->other_addr[5] +=
+					hw_priv->hw.id;
+			}
+			num = got_num = 0;
+		}
+		i++;
+	}
+	if (MAC_ADDR_LEN == j) {
+		if (MAIN_PORT == port)
+			hw_priv->hw.mac_override = 1;
+	}
+}
+
+#define KS884X_DMA_MASK			(~0x0UL)
+
+static void read_other_addr(struct ksz_hw *hw)
+{
+	int i;
+	u16 data[3];
+	struct ksz_switch *sw = hw->ksz_switch;
+
+	for (i = 0; i < 3; i++)
+		data[i] = eeprom_read(hw, i + EEPROM_DATA_OTHER_MAC_ADDR);
+	if ((data[0] || data[1] || data[2]) && data[0] != 0xffff) {
+		sw->other_addr[5] = (u8) data[0];
+		sw->other_addr[4] = (u8)(data[0] >> 8);
+		sw->other_addr[3] = (u8) data[1];
+		sw->other_addr[2] = (u8)(data[1] >> 8);
+		sw->other_addr[1] = (u8) data[2];
+		sw->other_addr[0] = (u8)(data[2] >> 8);
+	}
+}
+
+#ifndef PCI_VENDOR_ID_MICREL_KS
+#define PCI_VENDOR_ID_MICREL_KS		0x16c6
+#endif
+
+static int __init pcidev_init(struct pci_dev *pdev,
+	const struct pci_device_id *id)
+{
+	struct net_device *dev;
+	struct dev_priv *priv;
+	struct dev_info *hw_priv;
+	struct ksz_hw *hw;
+	struct platform_info *info;
+	struct ksz_port *port;
+	unsigned long reg_base;
+	unsigned long reg_len;
+	int cnt;
+	int i;
+	int mib_port_count;
+	int pi;
+	int port_count;
+	int result;
+	char banner[80];
+	struct ksz_switch *sw = NULL;
+
+	result = pci_enable_device(pdev);
+	if (result)
+		return result;
+
+	result = -ENODEV;
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+			pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+		return result;
+
+	reg_base = pci_resource_start(pdev, 0);
+	reg_len = pci_resource_len(pdev, 0);
+	if ((pci_resource_flags(pdev, 0) & IORESOURCE_IO) != 0)
+		return result;
+
+	if (!request_mem_region(reg_base, reg_len, DRV_NAME))
+		return result;
+	pci_set_master(pdev);
+
+	result = -ENOMEM;
+
+	info = kmalloc(sizeof(struct platform_info), GFP_KERNEL);
+	if (!info)
+		goto pcidev_init_dev_err;
+	memset(info, 0, sizeof(struct platform_info));
+
+	hw_priv = &info->dev_info;
+	hw_priv->pdev = pdev;
+
+	hw = &hw_priv->hw;
+
+	hw->io = ioremap(reg_base, reg_len);
+	if (!hw->io)
+		goto pcidev_init_io_err;
+
+	cnt = hw_init(hw);
+	if (!cnt) {
+		if (msg_enable & NETIF_MSG_PROBE)
+			printk(KERN_ALERT "chip not detected\n");
+		result = -ENODEV;
+		goto pcidev_init_alloc_err;
+	}
+
+	sprintf(banner,	"%s\n", version);
+	banner[13] = cnt + '0';
+	ks_info(hw_priv, "%s", banner);
+	ks_dbg(hw_priv, "Mem = %p; IRQ = %d\n", hw->io, pdev->irq);
+
+	/* Assume device is KSZ8841. */
+	hw->dev_count = 1;
+	port_count = 1;
+	mib_port_count = 1;
+	hw->addr_list_size = 0;
+	hw->mib_cnt = PORT_COUNTER_NUM;
+	hw->mib_port_cnt = 1;
+
+	/* KSZ8842 has a switch with multiple ports. */
+	if (2 == cnt) {
+		if (fast_aging)
+			hw->overrides |= FAST_AGING;
+
+		hw->mib_cnt = TOTAL_PORT_COUNTER_NUM;
+
+		/* Multiple network device interfaces are required. */
+		if (multi_dev) {
+			hw->dev_count = SWITCH_PORT_NUM;
+			hw->addr_list_size = SWITCH_PORT_NUM - 1;
+		}
+
+		/* Single network device has multiple ports. */
+		if (1 == hw->dev_count) {
+			port_count = SWITCH_PORT_NUM;
+			mib_port_count = SWITCH_PORT_NUM;
+		}
+		hw->mib_port_cnt = TOTAL_PORT_NUM;
+		hw->ksz_switch = kmalloc(sizeof(struct ksz_switch), GFP_KERNEL);
+		if (!hw->ksz_switch)
+			goto pcidev_init_alloc_err;
+		memset(hw->ksz_switch, 0, sizeof(struct ksz_switch));
+
+		sw = hw->ksz_switch;
+	}
+	for (i = 0; i < hw->mib_port_cnt; i++)
+		hw->port_mib[i].mib_start = 0;
+
+	hw->parent = hw_priv;
+
+	/* Default MTU is 1500. */
+	hw_priv->mtu = (REGULAR_RX_BUF_SIZE + 3) & ~3;
+
+	if (ksz_alloc_mem(hw_priv))
+		goto pcidev_init_mem_err;
+
+	hw_priv->hw.id = net_device_present;
+
+	spin_lock_init(&hw_priv->hwlock);
+	mutex_init(&hw_priv->lock);
+
+	/* tasklet is enabled. */
+	tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
+		(unsigned long) hw_priv);
+	tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
+		(unsigned long) hw_priv);
+
+	/* tasklet_enable will decrement the atomic counter. */
+	tasklet_disable(&hw_priv->rx_tasklet);
+	tasklet_disable(&hw_priv->tx_tasklet);
+
+	for (i = 0; i < TOTAL_PORT_NUM; i++)
+		init_waitqueue_head(&hw_priv->counter[i].counter);
+
+	if (macaddr[0] != ':')
+		get_mac_addr(hw_priv, macaddr, MAIN_PORT);
+
+	/* Read MAC address and initialize override address if not overrided. */
+	hw_read_addr(hw);
+
+	/* Multiple device interfaces mode requires a second MAC address. */
+	if (hw->dev_count > 1) {
+		memcpy(sw->other_addr, hw->override_addr, MAC_ADDR_LEN);
+		read_other_addr(hw);
+		if (mac1addr[0] != ':')
+			get_mac_addr(hw_priv, mac1addr, OTHER_PORT);
+	}
+
+	hw_setup(hw);
+	if (hw->ksz_switch)
+		sw_setup(hw);
+	else {
+		hw_priv->wol_support = WOL_SUPPORT;
+		hw_priv->wol_enable = 0;
+	}
+
+	INIT_WORK(&hw_priv->mib_read, mib_read_work);
+
+	/* 500 ms timeout */
+	ksz_init_timer(&hw_priv->mib_timer_info, 500 * HZ / 1000,
+		mib_monitor, hw_priv);
+
+	for (i = 0; i < hw->dev_count; i++) {
+		dev = alloc_etherdev(sizeof(struct dev_priv));
+		if (!dev)
+			goto pcidev_init_reg_err;
+		info->netdev[i] = dev;
+
+		priv = netdev_priv(dev);
+		priv->adapter = hw_priv;
+		priv->id = net_device_present++;
+
+		port = &priv->port;
+		port->port_cnt = port_count;
+		port->mib_port_cnt = mib_port_count;
+		port->first_port = i;
+		port->flow_ctrl = PHY_FLOW_CTRL;
+
+		port->hw = hw;
+		port->linked = &hw->port_info[port->first_port];
+
+		for (cnt = 0, pi = i; cnt < port_count; cnt++, pi++) {
+			hw->port_info[pi].port_id = pi;
+			hw->port_info[pi].pdev = dev;
+			hw->port_info[pi].state = media_disconnected;
+		}
+
+		dev->mem_start = (unsigned long) hw->io;
+		dev->mem_end = dev->mem_start + reg_len - 1;
+		dev->irq = pdev->irq;
+		if (MAIN_PORT == i)
+			memcpy(dev->dev_addr, hw_priv->hw.override_addr,
+				MAC_ADDR_LEN);
+		else {
+			memcpy(dev->dev_addr, sw->other_addr,
+				MAC_ADDR_LEN);
+			if (!memcmp(sw->other_addr, hw->override_addr,
+					MAC_ADDR_LEN))
+				dev->dev_addr[5] += port->first_port;
+		}
+
+		dev->netdev_ops = &netdev_ops;
+		SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+		if (register_netdev(dev))
+			goto pcidev_init_reg_err;
+		port_set_power_saving(port, true);
+	}
+
+	pci_dev_get(hw_priv->pdev);
+	pci_set_drvdata(pdev, info);
+	return 0;
+
+pcidev_init_reg_err:
+	for (i = 0; i < hw->dev_count; i++) {
+		if (info->netdev[i]) {
+			netdev_free(info->netdev[i]);
+			info->netdev[i] = NULL;
+		}
+	}
+
+pcidev_init_mem_err:
+	ksz_free_mem(hw_priv);
+	kfree(hw->ksz_switch);
+
+pcidev_init_alloc_err:
+	iounmap(hw->io);
+
+pcidev_init_io_err:
+	kfree(info);
+
+pcidev_init_dev_err:
+	release_mem_region(reg_base, reg_len);
+
+	return result;
+}
+
+static void pcidev_exit(struct pci_dev *pdev)
+{
+	int i;
+	struct platform_info *info = pci_get_drvdata(pdev);
+	struct dev_info *hw_priv = &info->dev_info;
+
+	pci_set_drvdata(pdev, NULL);
+
+	release_mem_region(pci_resource_start(pdev, 0),
+		pci_resource_len(pdev, 0));
+	for (i = 0; i < hw_priv->hw.dev_count; i++) {
+		if (info->netdev[i])
+			netdev_free(info->netdev[i]);
+	}
+	if (hw_priv->hw.io)
+		iounmap(hw_priv->hw.io);
+	ksz_free_mem(hw_priv);
+	kfree(hw_priv->hw.ksz_switch);
+	pci_dev_put(hw_priv->pdev);
+	kfree(info);
+}
+
+#ifdef CONFIG_PM
+static int pcidev_resume(struct pci_dev *pdev)
+{
+	int i;
+	struct platform_info *info = pci_get_drvdata(pdev);
+	struct dev_info *hw_priv = &info->dev_info;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_wake(pdev, PCI_D0, 0);
+
+	if (hw_priv->wol_enable)
+		hw_cfg_wol_pme(hw, 0);
+	for (i = 0; i < hw->dev_count; i++) {
+		if (info->netdev[i]) {
+			struct net_device *dev = info->netdev[i];
+
+			if (netif_running(dev)) {
+				netdev_open(dev);
+				netif_device_attach(dev);
+			}
+		}
+	}
+	return 0;
+}
+
+static int pcidev_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int i;
+	struct platform_info *info = pci_get_drvdata(pdev);
+	struct dev_info *hw_priv = &info->dev_info;
+	struct ksz_hw *hw = &hw_priv->hw;
+
+	/* Need to find a way to retrieve the device IP address. */
+	u8 net_addr[] = { 192, 168, 1, 1 };
+
+	for (i = 0; i < hw->dev_count; i++) {
+		if (info->netdev[i]) {
+			struct net_device *dev = info->netdev[i];
+
+			if (netif_running(dev)) {
+				netif_device_detach(dev);
+				netdev_close(dev);
+			}
+		}
+	}
+	if (hw_priv->wol_enable) {
+		hw_enable_wol(hw, hw_priv->wol_enable, net_addr);
+		hw_cfg_wol_pme(hw, 1);
+	}
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+#endif
+
+static char pcidev_name[] = "ksz884xp";
+
+static struct pci_device_id pcidev_table[] = {
+	{ PCI_VENDOR_ID_MICREL_KS, 0x8841,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_MICREL_KS, 0x8842,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, pcidev_table);
+
+static struct pci_driver pci_device_driver = {
+#ifdef CONFIG_PM
+	.suspend	= pcidev_suspend,
+	.resume		= pcidev_resume,
+#endif
+	.name		= pcidev_name,
+	.id_table	= pcidev_table,
+	.probe		= pcidev_init,
+	.remove		= pcidev_exit
+};
+
+static int __init ksz884x_init_module(void)
+{
+	return pci_register_driver(&pci_device_driver);
+}
+
+static void __exit ksz884x_cleanup_module(void)
+{
+	pci_unregister_driver(&pci_device_driver);
+}
+
+module_init(ksz884x_init_module);
+module_exit(ksz884x_cleanup_module);
+
+MODULE_DESCRIPTION("KSZ8841/2 PCI network driver");
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@micrel.com>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+
+module_param(macaddr, charp, 0);
+module_param(mac1addr, charp, 0);
+module_param(fast_aging, int, 0);
+module_param(multi_dev, int, 0);
+module_param(stp, int, 0);
+MODULE_PARM_DESC(macaddr, "MAC address");
+MODULE_PARM_DESC(mac1addr, "Second MAC address");
+MODULE_PARM_DESC(fast_aging, "Fast aging");
+MODULE_PARM_DESC(multi_dev, "Multiple device interfaces");
+MODULE_PARM_DESC(stp, "STP support");
-- 
cgit v1.2.3


From 1eb1cc7a209f9593312ba014f1b1f02c31eda4fb Mon Sep 17 00:00:00 2001
From: Tristram Ha <Tristram.Ha@micrel.com>
Date: Mon, 8 Feb 2010 11:38:28 +0000
Subject: net: Kconfig change for KSZ884X driver

Add Micrel KSZ8841/KSZ8842 PCI Ethernet chip support.

Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1bf1987571ff..5f646523c5ae 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1380,6 +1380,17 @@ config AC3200
 	  To compile this driver as a module, choose M here. The module
 	  will be called ac3200.
 
+config KSZ884X_PCI
+	tristate "Micrel KSZ8841/2 PCI"
+	depends on NET_PCI && PCI
+	select MII
+	select CRC32
+	help
+	  This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ksz884x.
+
 config APRICOT
 	tristate "Apricot Xen-II on board Ethernet"
 	depends on NET_PCI && ISA
-- 
cgit v1.2.3


From b25822ca5e3d6551b74506e2c69afada7c29c967 Mon Sep 17 00:00:00 2001
From: Tristram Ha <Tristram.Ha@micrel.com>
Date: Mon, 8 Feb 2010 11:40:04 +0000
Subject: net: Makefile change for KSZ884X driver

Add Micrel KSZ884X network driver for KSZ8841/KSZ8842 PCI Ethernet chips.

Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 95958032cd31..622cfd450d48 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -96,6 +96,7 @@ obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_KS8851)	+= ks8851.o
 obj-$(CONFIG_KS8851_MLL)	+= ks8851_mll.o
+obj-$(CONFIG_KSZ884X_PCI)	+= ksz884x.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
-- 
cgit v1.2.3


From 830a8a976ff2236ebc383e9a06f7872ed9243bfb Mon Sep 17 00:00:00 2001
From: Shirley Ma <mashirle@us.ibm.com>
Date: Mon, 8 Feb 2010 14:14:42 +0000
Subject: virtio_net: remove send queue

Now we have a virtio detach API (in commit
f9bfbebf34eab707b065116cdc9699d25ba4252a), we don't need to track xmit
skbs in the virio_net driver, which improves transmission performance.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/virtio_net.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 4c347a3df657..ce35b42cc2cb 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -56,9 +56,6 @@ struct virtnet_info
 	/* Host will merge rx buffers for big packets (shake it! shake it!) */
 	bool mergeable_rx_bufs;
 
-	/* Send queue. */
-	struct sk_buff_head send;
-
 	/* Work struct for refilling if we run low on memory. */
 	struct delayed_work refill;
 
@@ -505,7 +502,6 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
 
 	while ((skb = vi->svq->vq_ops->get_buf(vi->svq, &len)) != NULL) {
 		pr_debug("Sent skb %p\n", skb);
-		__skb_unlink(skb, &vi->send);
 		vi->dev->stats.tx_bytes += skb->len;
 		vi->dev->stats.tx_packets++;
 		tot_sgs += skb_vnet_hdr(skb)->num_sg;
@@ -588,15 +584,6 @@ again:
 	}
 	vi->svq->vq_ops->kick(vi->svq);
 
-	/*
-	 * Put new one in send queue.  You'd expect we'd need this before
-	 * xmit_skb calls add_buf(), since the callback can be triggered
-	 * immediately after that.  But since the callback just triggers
-	 * another call back here, normal network xmit locking prevents the
-	 * race.
-	 */
-	__skb_queue_head(&vi->send, skb);
-
 	/* Don't wait up for transmitted skbs to be freed. */
 	skb_orphan(skb);
 	nf_reset(skb);
@@ -980,9 +967,6 @@ static int virtnet_probe(struct virtio_device *vdev)
 			dev->features |= NETIF_F_HW_VLAN_FILTER;
 	}
 
-	/* Initialize our empty send queue. */
-	skb_queue_head_init(&vi->send);
-
 	err = register_netdev(dev);
 	if (err) {
 		pr_debug("virtio_net: registering device failed\n");
@@ -1018,6 +1002,12 @@ free:
 static void free_unused_bufs(struct virtnet_info *vi)
 {
 	void *buf;
+	while (1) {
+		buf = vi->svq->vq_ops->detach_unused_buf(vi->svq);
+		if (!buf)
+			break;
+		dev_kfree_skb(buf);
+	}
 	while (1) {
 		buf = vi->rvq->vq_ops->detach_unused_buf(vi->rvq);
 		if (!buf)
@@ -1038,11 +1028,11 @@ static void __devexit virtnet_remove(struct virtio_device *vdev)
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
-	/* Free our skbs in send queue, if any. */
-	__skb_queue_purge(&vi->send);
 
 	unregister_netdev(vi->dev);
 	cancel_delayed_work_sync(&vi->refill);
+
+	/* Free unused buffers in both send and recv, if any. */
 	free_unused_bufs(vi);
 
 	vdev->config->del_vqs(vi->vdev);
-- 
cgit v1.2.3


From e254f6ecaeb4e7c0588e739bf4641df0e8c22bba Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:28:35 +0000
Subject: be2net: remove unused pci device id

We are not going to use this device id.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      | 6 ++----
 drivers/net/benet/be_main.c | 1 -
 2 files changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 5bc74590c73e..242013157f20 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -44,16 +44,14 @@
 #define BE_DEVICE_ID1		0x211
 #define BE_DEVICE_ID2		0x221
 #define OC_DEVICE_ID1		0x700
-#define OC_DEVICE_ID2		0x701
-#define OC_DEVICE_ID3		0x710
+#define OC_DEVICE_ID2		0x710
 
 static inline char *nic_name(struct pci_dev *pdev)
 {
 	switch (pdev->device) {
 	case OC_DEVICE_ID1:
-	case OC_DEVICE_ID2:
 		return OC_NAME;
-	case OC_DEVICE_ID3:
+	case OC_DEVICE_ID2:
 		return OC_NAME1;
 	case BE_DEVICE_ID2:
 		return BE3_NAME;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 0014a4e86446..0779f6b5e29b 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -34,7 +34,6 @@ static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
-	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
-- 
cgit v1.2.3


From 3f0d4560aedaa67546eaeb3dc75fcdf68ec21036 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:30:35 +0000
Subject: be2net: bug fix for flashing the BladeEngine3 ASIC

Now flashing both BE2 and BE3 devices is supported.

From: Naresh G <nareshg@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_cmds.c |   9 +-
 drivers/net/benet/be_cmds.h |   3 +-
 drivers/net/benet/be_hw.h   | 119 +++++++++++++++-------
 drivers/net/benet/be_main.c | 239 +++++++++++++++++++++++---------------------
 4 files changed, 217 insertions(+), 153 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 3227b11131c4..d1a0e5ede4b3 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1374,7 +1374,7 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			u32 flash_type, u32 flash_opcode, u32 buf_size)
 {
 	struct be_mcc_wrb *wrb;
-	struct be_cmd_write_flashrom *req = cmd->va;
+	struct be_cmd_write_flashrom *req;
 	struct be_sge *sge;
 	int status;
 
@@ -1408,7 +1408,8 @@ err:
 	return status;
 }
 
-int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc)
+int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
+			 int offset)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_write_flashrom *req;
@@ -1429,9 +1430,9 @@ int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc)
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_READ_FLASHROM, sizeof(*req)+4);
 
-	req->params.op_type = cpu_to_le32(FLASHROM_TYPE_REDBOOT);
+	req->params.op_type = cpu_to_le32(IMG_TYPE_REDBOOT);
 	req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
-	req->params.offset = 0x3FFFC;
+	req->params.offset = offset;
 	req->params.data_buf_size = 0x4;
 
 	status = be_mcc_notify_wait(adapter);
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index c622a968c379..7297b5a47657 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -931,7 +931,8 @@ extern int be_cmd_read_port_type(struct be_adapter *adapter, u32 port,
 extern int be_cmd_write_flashrom(struct be_adapter *adapter,
 			struct be_dma_mem *cmd, u32 flash_oper,
 			u32 flash_opcode, u32 buf_size);
-extern int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc);
+int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
+				int offset);
 extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
 				struct be_dma_mem *nonemb_cmd);
 extern int be_cmd_fw_init(struct be_adapter *adapter);
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index e2b3beffd49d..bb2ae6f924db 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -99,6 +99,63 @@
 /* Number of entries posted */
 #define DB_MCCQ_NUM_POSTED_SHIFT	(16)	/* bits 16 - 29 */
 
+/* Flashrom related descriptors */
+#define IMAGE_TYPE_FIRMWARE		160
+#define IMAGE_TYPE_BOOTCODE		224
+#define IMAGE_TYPE_OPTIONROM		32
+
+#define NUM_FLASHDIR_ENTRIES		32
+
+#define IMG_TYPE_ISCSI_ACTIVE		0
+#define IMG_TYPE_REDBOOT		1
+#define IMG_TYPE_BIOS			2
+#define IMG_TYPE_PXE_BIOS		3
+#define IMG_TYPE_FCOE_BIOS		8
+#define IMG_TYPE_ISCSI_BACKUP		9
+#define IMG_TYPE_FCOE_FW_ACTIVE		10
+#define IMG_TYPE_FCOE_FW_BACKUP 	11
+#define IMG_TYPE_NCSI_BITFILE		13
+#define IMG_TYPE_NCSI_8051		14
+
+#define FLASHROM_OPER_FLASH		1
+#define FLASHROM_OPER_SAVE		2
+#define FLASHROM_OPER_REPORT		4
+
+#define FLASH_IMAGE_MAX_SIZE_g2            (1310720) /* Max firmware image sz */
+#define FLASH_BIOS_IMAGE_MAX_SIZE_g2       (262144)  /* Max OPTION ROM img sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2	  (262144)  /* Max Redboot image sz */
+#define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
+#define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
+
+#define FLASH_NCSI_MAGIC		(0x16032009)
+#define FLASH_NCSI_DISABLED		(0)
+#define FLASH_NCSI_ENABLED		(1)
+
+#define FLASH_NCSI_BITFILE_HDR_OFFSET	(0x600000)
+
+/* Offsets for components on Flash. */
+#define FLASH_iSCSI_PRIMARY_IMAGE_START_g2 (1048576)
+#define FLASH_iSCSI_BACKUP_IMAGE_START_g2  (2359296)
+#define FLASH_FCoE_PRIMARY_IMAGE_START_g2  (3670016)
+#define FLASH_FCoE_BACKUP_IMAGE_START_g2   (4980736)
+#define FLASH_iSCSI_BIOS_START_g2          (7340032)
+#define FLASH_PXE_BIOS_START_g2            (7864320)
+#define FLASH_FCoE_BIOS_START_g2           (524288)
+#define FLASH_REDBOOT_START_g2		  (0)
+
+#define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
+#define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
+#define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)
+#define FLASH_FCoE_BACKUP_IMAGE_START_g3   (8388608)
+#define FLASH_iSCSI_BIOS_START_g3          (12582912)
+#define FLASH_PXE_BIOS_START_g3            (13107200)
+#define FLASH_FCoE_BIOS_START_g3           (13631488)
+#define FLASH_REDBOOT_START_g3             (262144)
+
+
+
+
 /*
  * BE descriptors: host memory data structures whose formats
  * are hardwired in BE silicon.
@@ -107,6 +164,7 @@
 #define EQ_ENTRY_VALID_MASK 		0x1	/* bit 0 */
 #define EQ_ENTRY_RES_ID_MASK 		0xFFFF	/* bits 16 - 31 */
 #define EQ_ENTRY_RES_ID_SHIFT 		16
+
 struct be_eq_entry {
 	u32 evt;
 };
@@ -221,41 +279,6 @@ struct be_eth_rx_compl {
 	u32 dw[4];
 };
 
-/* Flashrom related descriptors */
-#define IMAGE_TYPE_FIRMWARE		160
-#define IMAGE_TYPE_BOOTCODE		224
-#define IMAGE_TYPE_OPTIONROM		32
-
-#define NUM_FLASHDIR_ENTRIES		32
-
-#define FLASHROM_TYPE_ISCSI_ACTIVE	0
-#define FLASHROM_TYPE_REDBOOT		1
-#define FLASHROM_TYPE_BIOS		2
-#define FLASHROM_TYPE_PXE_BIOS		3
-#define FLASHROM_TYPE_FCOE_BIOS		8
-#define FLASHROM_TYPE_ISCSI_BACKUP	9
-#define FLASHROM_TYPE_FCOE_FW_ACTIVE	10
-#define FLASHROM_TYPE_FCOE_FW_BACKUP 	11
-
-#define FLASHROM_OPER_FLASH		1
-#define FLASHROM_OPER_SAVE		2
-#define FLASHROM_OPER_REPORT		4
-
-#define FLASH_IMAGE_MAX_SIZE            (1310720) /* Max firmware image size */
-#define FLASH_BIOS_IMAGE_MAX_SIZE       (262144)  /* Max OPTION ROM image sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE    (262144)  /* Max redboot image sz */
-
-/* Offsets for components on Flash. */
-#define FLASH_iSCSI_PRIMARY_IMAGE_START (1048576)
-#define FLASH_iSCSI_BACKUP_IMAGE_START  (2359296)
-#define FLASH_FCoE_PRIMARY_IMAGE_START  (3670016)
-#define FLASH_FCoE_BACKUP_IMAGE_START   (4980736)
-#define FLASH_iSCSI_BIOS_START          (7340032)
-#define FLASH_PXE_BIOS_START            (7864320)
-#define FLASH_FCoE_BIOS_START           (524288)
-#define FLASH_REDBOOT_START		(32768)
-#define FLASH_REDBOOT_ISM_START		(0)
-
 struct controller_id {
 	u32 vendor;
 	u32 device;
@@ -263,7 +286,20 @@ struct controller_id {
 	u32 subdevice;
 };
 
-struct flash_file_hdr {
+struct flash_comp {
+	unsigned long offset;
+	int optype;
+	int size;
+};
+
+struct image_hdr {
+	u32 imageid;
+	u32 imageoffset;
+	u32 imagelength;
+	u32 image_checksum;
+	u8 image_version[32];
+};
+struct flash_file_hdr_g2 {
 	u8 sign[32];
 	u32 cksum;
 	u32 antidote;
@@ -275,6 +311,17 @@ struct flash_file_hdr {
 	u8 build[24];
 };
 
+struct flash_file_hdr_g3 {
+	u8 sign[52];
+	u8 ufi_version[4];
+	u32 file_len;
+	u32 cksum;
+	u32 antidote;
+	u32 num_imgs;
+	u8 build[24];
+	u8 rsvd[32];
+};
+
 struct flash_section_hdr {
 	u32 format_rev;
 	u32 cksum;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 0779f6b5e29b..99061488eeb3 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1798,15 +1798,19 @@ char flash_cookie[2][16] =	{"*** SE FLAS",
 				"H DIRECTORY *** "};
 
 static bool be_flash_redboot(struct be_adapter *adapter,
-			const u8 *p)
+			const u8 *p, u32 img_start, int image_size,
+			int hdr_size)
 {
 	u32 crc_offset;
 	u8 flashed_crc[4];
 	int status;
-	crc_offset = FLASH_REDBOOT_START + FLASH_REDBOOT_IMAGE_MAX_SIZE - 4
-			+ sizeof(struct flash_file_hdr) - 32*1024;
+
+	crc_offset = hdr_size + img_start + image_size - 4;
+
 	p += crc_offset;
-	status = be_cmd_get_flash_crc(adapter, flashed_crc);
+
+	status = be_cmd_get_flash_crc(adapter, flashed_crc,
+			(img_start + image_size - 4));
 	if (status) {
 		dev_err(&adapter->pdev->dev,
 		"could not get crc from flash, not flashing redboot\n");
@@ -1818,102 +1822,124 @@ static bool be_flash_redboot(struct be_adapter *adapter,
 		return false;
 	else
 		return true;
-
 }
 
-static int be_flash_image(struct be_adapter *adapter,
+static int be_flash_data(struct be_adapter *adapter,
 			const struct firmware *fw,
-			struct be_dma_mem *flash_cmd, u32 flash_type)
+			struct be_dma_mem *flash_cmd, int num_of_images)
+
 {
-	int status;
-	u32 flash_op, image_offset = 0, total_bytes, image_size = 0;
+	int status = 0, i, filehdr_size = 0;
+	u32 total_bytes = 0, flash_op;
 	int num_bytes;
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
-
-	switch (flash_type) {
-	case FLASHROM_TYPE_ISCSI_ACTIVE:
-		image_offset = FLASH_iSCSI_PRIMARY_IMAGE_START;
-		image_size = FLASH_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_ISCSI_BACKUP:
-		image_offset = FLASH_iSCSI_BACKUP_IMAGE_START;
-		image_size = FLASH_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_FCOE_FW_ACTIVE:
-		image_offset = FLASH_FCoE_PRIMARY_IMAGE_START;
-		image_size = FLASH_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_FCOE_FW_BACKUP:
-		image_offset = FLASH_FCoE_BACKUP_IMAGE_START;
-		image_size = FLASH_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_BIOS:
-		image_offset = FLASH_iSCSI_BIOS_START;
-		image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_FCOE_BIOS:
-		image_offset = FLASH_FCoE_BIOS_START;
-		image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_PXE_BIOS:
-		image_offset = FLASH_PXE_BIOS_START;
-		image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
-		break;
-	case FLASHROM_TYPE_REDBOOT:
-		if (!be_flash_redboot(adapter, fw->data))
-			return 0;
-		image_offset = FLASH_REDBOOT_ISM_START;
-		image_size = FLASH_REDBOOT_IMAGE_MAX_SIZE;
-		break;
-	default:
-		return 0;
+	struct flash_comp *pflashcomp;
+
+	struct flash_comp gen3_flash_types[8] = {
+		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
+			FLASH_REDBOOT_IMAGE_MAX_SIZE_g3},
+		{ FLASH_iSCSI_BIOS_START_g3, IMG_TYPE_BIOS,
+			FLASH_BIOS_IMAGE_MAX_SIZE_g3},
+		{ FLASH_PXE_BIOS_START_g3, IMG_TYPE_PXE_BIOS,
+			FLASH_BIOS_IMAGE_MAX_SIZE_g3},
+		{ FLASH_FCoE_BIOS_START_g3, IMG_TYPE_FCOE_BIOS,
+			FLASH_BIOS_IMAGE_MAX_SIZE_g3},
+		{ FLASH_iSCSI_BACKUP_IMAGE_START_g3, IMG_TYPE_ISCSI_BACKUP,
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
+			FLASH_IMAGE_MAX_SIZE_g3}
+	};
+	struct flash_comp gen2_flash_types[8] = {
+		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
+			FLASH_IMAGE_MAX_SIZE_g2},
+		{ FLASH_REDBOOT_START_g2, IMG_TYPE_REDBOOT,
+			FLASH_REDBOOT_IMAGE_MAX_SIZE_g2},
+		{ FLASH_iSCSI_BIOS_START_g2, IMG_TYPE_BIOS,
+			FLASH_BIOS_IMAGE_MAX_SIZE_g2},
+		{ FLASH_PXE_BIOS_START_g2, IMG_TYPE_PXE_BIOS,
+			FLASH_BIOS_IMAGE_MAX_SIZE_g2},
+		{ FLASH_FCoE_BIOS_START_g2, IMG_TYPE_FCOE_BIOS,
+			FLASH_BIOS_IMAGE_MAX_SIZE_g2},
+		{ FLASH_iSCSI_BACKUP_IMAGE_START_g2, IMG_TYPE_ISCSI_BACKUP,
+			FLASH_IMAGE_MAX_SIZE_g2},
+		{ FLASH_FCoE_PRIMARY_IMAGE_START_g2, IMG_TYPE_FCOE_FW_ACTIVE,
+			FLASH_IMAGE_MAX_SIZE_g2},
+		{ FLASH_FCoE_BACKUP_IMAGE_START_g2, IMG_TYPE_FCOE_FW_BACKUP,
+			 FLASH_IMAGE_MAX_SIZE_g2}
+	};
+
+	if (adapter->generation == BE_GEN3) {
+		pflashcomp = gen3_flash_types;
+		filehdr_size = sizeof(struct flash_file_hdr_g3);
+	} else {
+		pflashcomp = gen2_flash_types;
+		filehdr_size = sizeof(struct flash_file_hdr_g2);
 	}
-
-	p += sizeof(struct flash_file_hdr) + image_offset;
-	if (p + image_size > fw->data + fw->size)
+	for (i = 0; i < 8; i++) {
+		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
+			(!be_flash_redboot(adapter, fw->data,
+			 pflashcomp[i].offset, pflashcomp[i].size,
+			 filehdr_size)))
+			continue;
+		p = fw->data;
+		p += filehdr_size + pflashcomp[i].offset
+			+ (num_of_images * sizeof(struct image_hdr));
+	if (p + pflashcomp[i].size > fw->data + fw->size)
 		return -1;
-
-	total_bytes = image_size;
-
-	while (total_bytes) {
-		if (total_bytes > 32*1024)
-			num_bytes = 32*1024;
-		else
-			num_bytes = total_bytes;
-		total_bytes -= num_bytes;
-
-		if (!total_bytes)
-			flash_op = FLASHROM_OPER_FLASH;
-		else
-			flash_op = FLASHROM_OPER_SAVE;
-		memcpy(req->params.data_buf, p, num_bytes);
-		p += num_bytes;
-		status = be_cmd_write_flashrom(adapter, flash_cmd,
-				flash_type, flash_op, num_bytes);
-		if (status) {
-			dev_err(&adapter->pdev->dev,
-			"cmd to write to flash rom failed. type/op %d/%d\n",
-			flash_type, flash_op);
-			return -1;
+	total_bytes = pflashcomp[i].size;
+		while (total_bytes) {
+			if (total_bytes > 32*1024)
+				num_bytes = 32*1024;
+			else
+				num_bytes = total_bytes;
+			total_bytes -= num_bytes;
+
+			if (!total_bytes)
+				flash_op = FLASHROM_OPER_FLASH;
+			else
+				flash_op = FLASHROM_OPER_SAVE;
+			memcpy(req->params.data_buf, p, num_bytes);
+			p += num_bytes;
+			status = be_cmd_write_flashrom(adapter, flash_cmd,
+				pflashcomp[i].optype, flash_op, num_bytes);
+			if (status) {
+				dev_err(&adapter->pdev->dev,
+					"cmd to write to flash rom failed.\n");
+				return -1;
+			}
+			yield();
 		}
-		yield();
 	}
-
 	return 0;
 }
 
+static int get_ufigen_type(struct flash_file_hdr_g2 *fhdr)
+{
+	if (fhdr == NULL)
+		return 0;
+	if (fhdr->build[0] == '3')
+		return BE_GEN3;
+	else if (fhdr->build[0] == '2')
+		return BE_GEN2;
+	else
+		return 0;
+}
+
 int be_load_fw(struct be_adapter *adapter, u8 *func)
 {
 	char fw_file[ETHTOOL_FLASH_MAX_FILENAME];
 	const struct firmware *fw;
-	struct flash_file_hdr *fhdr;
-	struct flash_section_info *fsec = NULL;
+	struct flash_file_hdr_g2 *fhdr;
+	struct flash_file_hdr_g3 *fhdr3;
+	struct image_hdr *img_hdr_ptr = NULL;
 	struct be_dma_mem flash_cmd;
-	int status;
+	int status, i = 0;
 	const u8 *p;
-	bool entry_found = false;
-	int flash_type;
 	char fw_ver[FW_VER_LEN];
 	char fw_cfg;
 
@@ -1931,34 +1957,9 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 		goto fw_exit;
 
 	p = fw->data;
-	fhdr = (struct flash_file_hdr *) p;
-	if (memcmp(fhdr->sign, FW_FILE_HDR_SIGN, strlen(FW_FILE_HDR_SIGN))) {
-		dev_err(&adapter->pdev->dev,
-			"Firmware(%s) load error (signature did not match)\n",
-				fw_file);
-		status = -1;
-		goto fw_exit;
-	}
-
+	fhdr = (struct flash_file_hdr_g2 *) p;
 	dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
 
-	p += sizeof(struct flash_file_hdr);
-	while (p < (fw->data + fw->size)) {
-		fsec = (struct flash_section_info *)p;
-		if (!memcmp(flash_cookie, fsec->cookie, sizeof(flash_cookie))) {
-			entry_found = true;
-			break;
-		}
-		p += 32;
-	}
-
-	if (!entry_found) {
-		status = -1;
-		dev_err(&adapter->pdev->dev,
-			"Flash cookie not found in firmware image\n");
-		goto fw_exit;
-	}
-
 	flash_cmd.size = sizeof(struct be_cmd_write_flashrom) + 32*1024;
 	flash_cmd.va = pci_alloc_consistent(adapter->pdev, flash_cmd.size,
 					&flash_cmd.dma);
@@ -1969,12 +1970,26 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 		goto fw_exit;
 	}
 
-	for (flash_type = FLASHROM_TYPE_ISCSI_ACTIVE;
-		flash_type <= FLASHROM_TYPE_FCOE_FW_BACKUP; flash_type++) {
-		status = be_flash_image(adapter, fw, &flash_cmd,
-				flash_type);
-		if (status)
-			break;
+	if ((adapter->generation == BE_GEN3) &&
+			(get_ufigen_type(fhdr) == BE_GEN3)) {
+		fhdr3 = (struct flash_file_hdr_g3 *) fw->data;
+		for (i = 0; i < fhdr3->num_imgs; i++) {
+			img_hdr_ptr = (struct image_hdr *) (fw->data +
+					(sizeof(struct flash_file_hdr_g3) +
+					i * sizeof(struct image_hdr)));
+			if (img_hdr_ptr->imageid == 1) {
+				status = be_flash_data(adapter, fw,
+						&flash_cmd, fhdr3->num_imgs);
+			}
+
+		}
+	} else if ((adapter->generation == BE_GEN2) &&
+			(get_ufigen_type(fhdr) == BE_GEN2)) {
+		status = be_flash_data(adapter, fw, &flash_cmd, 0);
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"UFI and Interface are not compatible for flashing\n");
+		status = -1;
 	}
 
 	pci_free_consistent(adapter->pdev, flash_cmd.size, flash_cmd.va,
-- 
cgit v1.2.3


From 34a89b8c75abe2873a95524552cc266fdd3b6a85 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:32:43 +0000
Subject: be2net: bug fix in be_change_mtu

Current code allows the new mtu to cross the supported value.
This patch fixes the boundary checks.

From: Suresh R <sureshr@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 99061488eeb3..c65c63427d41 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -473,10 +473,12 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	if (new_mtu < BE_MIN_MTU ||
-			new_mtu > BE_MAX_JUMBO_FRAME_SIZE) {
+			new_mtu > (BE_MAX_JUMBO_FRAME_SIZE -
+					(ETH_HLEN + ETH_FCS_LEN))) {
 		dev_info(&adapter->pdev->dev,
 			"MTU must be between %d and %d bytes\n",
-			BE_MIN_MTU, BE_MAX_JUMBO_FRAME_SIZE);
+			BE_MIN_MTU,
+			(BE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN)));
 		return -EINVAL;
 	}
 	dev_info(&adapter->pdev->dev, "MTU changed from %d to %d bytes\n",
-- 
cgit v1.2.3


From 205859a2ff922d0587a819b08007398cbd0a6a30 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:34:21 +0000
Subject: be2net: minor code optimizations

Couple of code optimizations in the Rx path (to avoid a memset).

From: Sathya P <sathyap@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index c65c63427d41..1951d7620a88 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -636,9 +636,11 @@ get_rx_page_info(struct be_adapter *adapter, u16 frag_idx)
 	rx_page_info = &adapter->rx_obj.page_info_tbl[frag_idx];
 	BUG_ON(!rx_page_info->page);
 
-	if (rx_page_info->last_page_user)
+	if (rx_page_info->last_page_user) {
 		pci_unmap_page(adapter->pdev, pci_unmap_addr(rx_page_info, bus),
 			adapter->big_page_size, PCI_DMA_FROMDEVICE);
+		rx_page_info->last_page_user = false;
+	}
 
 	atomic_dec(&rxq->used);
 	return rx_page_info;
@@ -706,7 +708,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 		skb->data_len = curr_frag_len - hdr_len;
 		skb->tail += hdr_len;
 	}
-	memset(page_info, 0, sizeof(*page_info));
+	page_info->page = NULL;
 
 	if (pktsize <= rx_frag_size) {
 		BUG_ON(num_rcvd != 1);
@@ -739,7 +741,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 		skb->len += curr_frag_len;
 		skb->data_len += curr_frag_len;
 
-		memset(page_info, 0, sizeof(*page_info));
+		page_info->page = NULL;
 	}
 	BUG_ON(j > MAX_SKB_FRAGS);
 
-- 
cgit v1.2.3


From 82903e4bfca1578336a91c0c17839b484c12295d Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:34:57 +0000
Subject: be2net: fix to limit max vlans supported in certain skews

In certain skews the ASIC can support only 16 vlans per interface.
Once the limit is crossed, the ASIC is programmed in vlan promiscuous mode.
Switch off the vlan promiscuous mode once the number of vlans
falls back to the max vlans supported.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      |  3 ++-
 drivers/net/benet/be_main.c | 30 +++++++++++++++++-------------
 2 files changed, 19 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 242013157f20..476a5c455794 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -250,7 +250,8 @@ struct be_adapter {
 	bool rx_post_starved;	/* Zero rx frags have been posted to BE */
 
 	struct vlan_group *vlan_grp;
-	u16 num_vlans;
+	u16 vlans_added;
+	u16 max_vlans;	/* Number of vlans supported */
 	u8 vlan_tag[VLAN_GROUP_ARRAY_LEN];
 	struct be_dma_mem mc_cmd_mem;
 
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 1951d7620a88..92c55f679466 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -488,17 +488,16 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
 }
 
 /*
- * if there are BE_NUM_VLANS_SUPPORTED or lesser number of VLANS configured,
- * program them in BE.  If more than BE_NUM_VLANS_SUPPORTED are configured,
- * set the BE in promiscuous VLAN mode.
+ * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE.
+ * If the user configures more, place BE in vlan promiscuous mode.
  */
 static int be_vid_config(struct be_adapter *adapter)
 {
 	u16 vtag[BE_NUM_VLANS_SUPPORTED];
 	u16 ntags = 0, i;
-	int status;
+	int status = 0;
 
-	if (adapter->num_vlans <= BE_NUM_VLANS_SUPPORTED)  {
+	if (adapter->vlans_added <= adapter->max_vlans)  {
 		/* Construct VLAN Table to give to HW */
 		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
 			if (adapter->vlan_tag[i]) {
@@ -532,21 +531,21 @@ static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 
-	adapter->num_vlans++;
 	adapter->vlan_tag[vid] = 1;
-
-	be_vid_config(adapter);
+	adapter->vlans_added++;
+	if (adapter->vlans_added <= (adapter->max_vlans + 1))
+		be_vid_config(adapter);
 }
 
 static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 
-	adapter->num_vlans--;
 	adapter->vlan_tag[vid] = 0;
-
 	vlan_group_set_device(adapter->vlan_grp, vid, NULL);
-	be_vid_config(adapter);
+	adapter->vlans_added--;
+	if (adapter->vlans_added <= adapter->max_vlans)
+		be_vid_config(adapter);
 }
 
 static void be_set_multicast_list(struct net_device *netdev)
@@ -786,7 +785,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 	skb->dev = adapter->netdev;
 
 	if (vlanf) {
-		if (!adapter->vlan_grp || adapter->num_vlans == 0) {
+		if (!adapter->vlan_grp || adapter->vlans_added == 0) {
 			kfree_skb(skb);
 			return;
 		}
@@ -866,7 +865,7 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
 		vid = be16_to_cpu(vid);
 
-		if (!adapter->vlan_grp || adapter->num_vlans == 0)
+		if (!adapter->vlan_grp || adapter->vlans_added == 0)
 			return;
 
 		vlan_gro_frags(&eq_obj->napi, adapter->vlan_grp, vid);
@@ -2241,6 +2240,11 @@ static int be_get_config(struct be_adapter *adapter)
 	memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
 	memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
 
+	if (adapter->cap & 0x400)
+		adapter->max_vlans = BE_NUM_VLANS_SUPPORTED/4;
+	else
+		adapter->max_vlans = BE_NUM_VLANS_SUPPORTED;
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 35ecf03c833d9aae35df9f1d86e6efa86d3d2628 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:38:06 +0000
Subject: be2net: change the driver description

Since the driver is supporting multiple generations of the ASIC
remove ASIC generation information from the driver description.
This information is displayed by modinfo.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 476a5c455794..b39b38542623 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -38,7 +38,7 @@
 #define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
 #define OC_NAME			"Emulex OneConnect 10Gbps NIC"
 #define OC_NAME1		"Emulex OneConnect 10Gbps NIC (be3)"
-#define DRV_DESC		BE_NAME "Driver"
+#define DRV_DESC		"ServerEngines BladeEngine 10Gbps NIC Driver"
 
 #define BE_VENDOR_ID 		0x19a2
 #define BE_DEVICE_ID1		0x211
-- 
cgit v1.2.3


From 1a8cdc5d49cdbd79dedce8db3840fca825304d8d Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 9 Feb 2010 01:39:05 +0000
Subject: be2net: remove ASIC generation number from Kconfig

Since the driver is supporting multiple generations of the ASIC
don't mention any ASIC generation number.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/Kconfig b/drivers/net/benet/Kconfig
index fdb6e81a4374..1a41a49bb619 100644
--- a/drivers/net/benet/Kconfig
+++ b/drivers/net/benet/Kconfig
@@ -1,6 +1,6 @@
 config BE2NET
-	tristate "ServerEngines' 10Gbps NIC - BladeEngine 2"
+	tristate "ServerEngines' 10Gbps NIC - BladeEngine"
 	depends on PCI && INET
 	help
 	This driver implements the NIC functionality for ServerEngines'
-	10Gbps network adapter - BladeEngine 2.
+	10Gbps network adapter - BladeEngine.
-- 
cgit v1.2.3


From c0ad98453f23b98f73a1f1be2a75303a6c0dee4c Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Mon, 8 Feb 2010 17:51:26 +0000
Subject: be2net: bug fix in be_read_eeprom

The offset to read the eeprom data was missing and
wrong eeprom data was being dumped. This patch fixes this.

>From Suresh R <sureshr@serverengines.com>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 09d8899b2de9..dcc7f37b5428 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -614,7 +614,7 @@ be_read_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom,
 
 	if (!status) {
 		resp = (struct be_cmd_resp_seeprom_read *) eeprom_cmd.va;
-		memcpy(data, resp->seeprom_data, eeprom->len);
+		memcpy(data, resp->seeprom_data + eeprom->offset, eeprom->len);
 	}
 	pci_free_consistent(adapter->pdev, eeprom_cmd.size, eeprom_cmd.va,
 			eeprom_cmd.dma);
-- 
cgit v1.2.3


From 5e2a911cecc7e0fd89b1d2d001b7b89d47057ad6 Mon Sep 17 00:00:00 2001
From: Steve Hodgson <shodgson@solarflare.com>
Date: Fri, 12 Feb 2010 12:32:27 -0800
Subject: sfc: Fix SFE4002 initialisation

From: Steve Hodgson <shodgson@solarflare.com>

Commit 357d46a17e54c9a87e0e6ef3930ff4ab2d232b81 "sfc: QT202x: Remove
unreliable MMD check at initialisation" broke initialisation of the
SFE4002.  efx_mdio_reset_mmd() returns a positive value rather than 0
on success.  The above commit causes this value to be propagated up
by qt202x_reset_phy(), which is treated as a failure by its callers.
Change qt202x_reset_phy() to return 0 if successful.

The PCI layer treats >0 as "fail, but please call remove() anyway",
which means that unloading the driver would cause a crash.  Add a
WARN_ON() on the failure path of efx_pci_probe() to provide early
warning if there are any other cases where we do this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/efx.c        | 1 +
 drivers/net/sfc/qt202x_phy.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 103e8b0e2a0d..46997e177ee3 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -2284,6 +2284,7 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
  fail2:
 	efx_fini_struct(efx);
  fail1:
+	WARN_ON(rc > 0);
 	EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
 	free_netdev(net_dev);
 	return rc;
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index e0d13a451019..67eec7a6e487 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -320,7 +320,7 @@ static int qt202x_reset_phy(struct efx_nic *efx)
 
 	falcon_board(efx)->type->init_phy(efx);
 
-	return rc;
+	return 0;
 
  fail:
 	EFX_ERR(efx, "PHY reset timed out\n");
-- 
cgit v1.2.3


From ba211e3ec35820eced89bfe12e2d94e6352a4c5f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Feb 2010 11:49:48 +0000
Subject: drivers/net/atl1e: Use netdev_printk helpers

Logging messages sometimes had duplicated "ATL1E" output.

For instance:
ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
is now:
ATL1E 0000:03:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>

Add some consistency to logging messages
Add some missing \n's to logging messages
Miscellaneous typo spelling corrections
Change atl1e_validate_option argument from pdev to adapter

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/atl1e/atl1e_hw.c    |  23 +++---
 drivers/net/atl1e/atl1e_main.c  | 153 ++++++++++++++++++----------------------
 drivers/net/atl1e/atl1e_param.c |  35 +++++----
 3 files changed, 99 insertions(+), 112 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
index 4a7700620119..76cc043def8c 100644
--- a/drivers/net/atl1e/atl1e_hw.c
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -394,7 +394,6 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
 int atl1e_phy_commit(struct atl1e_hw *hw)
 {
 	struct atl1e_adapter *adapter = hw->adapter;
-	struct pci_dev *pdev = adapter->pdev;
 	int ret_val;
 	u16 phy_data;
 
@@ -415,12 +414,12 @@ int atl1e_phy_commit(struct atl1e_hw *hw)
 		}
 
 		if (0 != (val & (MDIO_START | MDIO_BUSY))) {
-			dev_err(&pdev->dev,
-				"pcie linkdown at least for 25ms\n");
+			netdev_err(adapter->netdev,
+				   "pcie linkdown at least for 25ms\n");
 			return ret_val;
 		}
 
-		dev_err(&pdev->dev, "pcie linkup after %d ms\n", i);
+		netdev_err(adapter->netdev, "pcie linkup after %d ms\n", i);
 	}
 	return 0;
 }
@@ -428,7 +427,6 @@ int atl1e_phy_commit(struct atl1e_hw *hw)
 int atl1e_phy_init(struct atl1e_hw *hw)
 {
 	struct atl1e_adapter *adapter = hw->adapter;
-	struct pci_dev *pdev = adapter->pdev;
 	s32 ret_val;
 	u16 phy_val;
 
@@ -492,20 +490,22 @@ int atl1e_phy_init(struct atl1e_hw *hw)
 	/*Enable PHY LinkChange Interrupt */
 	ret_val = atl1e_write_phy_reg(hw, MII_INT_CTRL, 0xC00);
 	if (ret_val) {
-		dev_err(&pdev->dev, "Error enable PHY linkChange Interrupt\n");
+		netdev_err(adapter->netdev,
+			   "Error enable PHY linkChange Interrupt\n");
 		return ret_val;
 	}
 	/* setup AutoNeg parameters */
 	ret_val = atl1e_phy_setup_autoneg_adv(hw);
 	if (ret_val) {
-		dev_err(&pdev->dev, "Error Setting up Auto-Negotiation\n");
+		netdev_err(adapter->netdev,
+			   "Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
 	/* SW.Reset & En-Auto-Neg to restart Auto-Neg*/
-	dev_dbg(&pdev->dev, "Restarting Auto-Neg");
+	netdev_dbg(adapter->netdev, "Restarting Auto-Negotiation\n");
 	ret_val = atl1e_phy_commit(hw);
 	if (ret_val) {
-		dev_err(&pdev->dev, "Error Resetting the phy");
+		netdev_err(adapter->netdev, "Error resetting the phy\n");
 		return ret_val;
 	}
 
@@ -559,9 +559,8 @@ int atl1e_reset_hw(struct atl1e_hw *hw)
 	}
 
 	if (timeout >= AT_HW_MAX_IDLE_DELAY) {
-		dev_err(&pdev->dev,
-			"MAC state machine cann't be idle since"
-			" disabled for 10ms second\n");
+		netdev_err(adapter->netdev,
+			   "MAC state machine can't be idle since disabled for 10ms second\n");
 		return AT_ERR_TIMEOUT;
 	}
 
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index d59f8e89c65d..7d8de10ba628 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -164,11 +164,10 @@ static int atl1e_check_link(struct atl1e_adapter *adapter)
 {
 	struct atl1e_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
-	struct pci_dev    *pdev   = adapter->pdev;
 	int err = 0;
 	u16 speed, duplex, phy_data;
 
-	/* MII_BMSR must read twise */
+	/* MII_BMSR must read twice */
 	atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
 	atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
 	if ((phy_data & BMSR_LSTATUS) == 0) {
@@ -195,12 +194,11 @@ static int atl1e_check_link(struct atl1e_adapter *adapter)
 			adapter->link_speed  = speed;
 			adapter->link_duplex = duplex;
 			atl1e_setup_mac_ctrl(adapter);
-			dev_info(&pdev->dev,
-				"%s: %s NIC Link is Up<%d Mbps %s>\n",
-				atl1e_driver_name, netdev->name,
-				adapter->link_speed,
-				adapter->link_duplex == FULL_DUPLEX ?
-				"Full Duplex" : "Half Duplex");
+			netdev_info(netdev,
+				    "NIC Link is Up <%d Mbps %s Duplex>\n",
+				    adapter->link_speed,
+				    adapter->link_duplex == FULL_DUPLEX ?
+				    "Full" : "Half");
 		}
 
 		if (!netif_carrier_ok(netdev)) {
@@ -230,7 +228,6 @@ static void atl1e_link_chg_task(struct work_struct *work)
 static void atl1e_link_chg_event(struct atl1e_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	struct pci_dev    *pdev   = adapter->pdev;
 	u16 phy_data = 0;
 	u16 link_up = 0;
 
@@ -243,8 +240,7 @@ static void atl1e_link_chg_event(struct atl1e_adapter *adapter)
 	if (!link_up) {
 		if (netif_carrier_ok(netdev)) {
 			/* old link state: Up */
-			dev_info(&pdev->dev, "%s: %s NIC Link is Down\n",
-					atl1e_driver_name, netdev->name);
+			netdev_info(netdev, "NIC Link is Down\n");
 			adapter->link_speed = SPEED_0;
 			netif_stop_queue(netdev);
 		}
@@ -321,10 +317,9 @@ static void atl1e_vlan_rx_register(struct net_device *netdev,
 				   struct vlan_group *grp)
 {
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
-	struct pci_dev *pdev = adapter->pdev;
 	u32 mac_ctrl_data = 0;
 
-	dev_dbg(&pdev->dev, "atl1e_vlan_rx_register\n");
+	netdev_dbg(adapter->netdev, "%s\n", __func__);
 
 	atl1e_irq_disable(adapter);
 
@@ -345,9 +340,7 @@ static void atl1e_vlan_rx_register(struct net_device *netdev,
 
 static void atl1e_restore_vlan(struct atl1e_adapter *adapter)
 {
-	struct pci_dev *pdev = adapter->pdev;
-
-	dev_dbg(&pdev->dev, "atl1e_restore_vlan !");
+	netdev_dbg(adapter->netdev, "%s\n", __func__);
 	atl1e_vlan_rx_register(adapter->netdev, adapter->vlgrp);
 }
 /*
@@ -391,7 +384,7 @@ static int atl1e_change_mtu(struct net_device *netdev, int new_mtu)
 
 	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
 			(max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
+		netdev_warn(adapter->netdev, "invalid MTU setting\n");
 		return -EINVAL;
 	}
 	/* set MTU */
@@ -438,7 +431,6 @@ static int atl1e_mii_ioctl(struct net_device *netdev,
 			   struct ifreq *ifr, int cmd)
 {
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
-	struct pci_dev *pdev = adapter->pdev;
 	struct mii_ioctl_data *data = if_mii(ifr);
 	unsigned long flags;
 	int retval = 0;
@@ -466,8 +458,8 @@ static int atl1e_mii_ioctl(struct net_device *netdev,
 			goto out;
 		}
 
-		dev_dbg(&pdev->dev, "<atl1e_mii_ioctl> write %x %x",
-				data->reg_num, data->val_in);
+		netdev_dbg(adapter->netdev, "<atl1e_mii_ioctl> write %x %x\n",
+			   data->reg_num, data->val_in);
 		if (atl1e_write_phy_reg(&adapter->hw,
 				     data->reg_num, data->val_in)) {
 			retval = -EIO;
@@ -602,7 +594,7 @@ static int __devinit atl1e_sw_init(struct atl1e_adapter *adapter)
 	hw->dmaw_dly_cnt = 4;
 
 	if (atl1e_alloc_queues(adapter)) {
-		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		netdev_err(adapter->netdev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;
 	}
 
@@ -800,8 +792,8 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
 			adapter->ring_size, &adapter->ring_dma);
 
 	if (adapter->ring_vir_addr == NULL) {
-		dev_err(&pdev->dev, "pci_alloc_consistent failed, "
-				    "size = D%d", size);
+		netdev_err(adapter->netdev,
+			   "pci_alloc_consistent failed, size = D%d\n", size);
 		return -ENOMEM;
 	}
 
@@ -817,7 +809,8 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
 	size = sizeof(struct atl1e_tx_buffer) * (tx_ring->count);
 	tx_ring->tx_buffer = kzalloc(size, GFP_KERNEL);
 	if (tx_ring->tx_buffer == NULL) {
-		dev_err(&pdev->dev, "kzalloc failed , size = D%d", size);
+		netdev_err(adapter->netdev, "kzalloc failed, size = D%d\n",
+			   size);
 		err = -ENOMEM;
 		goto failed;
 	}
@@ -852,8 +845,8 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
 	}
 
 	if (unlikely(offset > adapter->ring_size)) {
-		dev_err(&pdev->dev, "offset(%d) > ring size(%d) !!\n",
-				offset, adapter->ring_size);
+		netdev_err(adapter->netdev, "offset(%d) > ring size(%d) !!\n",
+			   offset, adapter->ring_size);
 		err = -1;
 		goto failed;
 	}
@@ -1077,7 +1070,6 @@ static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
 static int atl1e_configure(struct atl1e_adapter *adapter)
 {
 	struct atl1e_hw *hw = &adapter->hw;
-	struct pci_dev *pdev = adapter->pdev;
 
 	u32 intr_status_data = 0;
 
@@ -1130,8 +1122,8 @@ static int atl1e_configure(struct atl1e_adapter *adapter)
 
 	intr_status_data = AT_READ_REG(hw, REG_ISR);
 	if (unlikely((intr_status_data & ISR_PHY_LINKDOWN) != 0)) {
-		dev_err(&pdev->dev, "atl1e_configure failed,"
-				"PCIE phy link down\n");
+		netdev_err(adapter->netdev,
+			   "atl1e_configure failed, PCIE phy link down\n");
 		return -1;
 	}
 
@@ -1262,7 +1254,6 @@ static irqreturn_t atl1e_intr(int irq, void *data)
 {
 	struct net_device *netdev  = data;
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
-	struct pci_dev *pdev = adapter->pdev;
 	struct atl1e_hw *hw = &adapter->hw;
 	int max_ints = AT_MAX_INT_WORK;
 	int handled = IRQ_NONE;
@@ -1285,8 +1276,8 @@ static irqreturn_t atl1e_intr(int irq, void *data)
 		handled = IRQ_HANDLED;
 		/* check if PCIE PHY Link down */
 		if (status & ISR_PHY_LINKDOWN) {
-			dev_err(&pdev->dev,
-				"pcie phy linkdown %x\n", status);
+			netdev_err(adapter->netdev,
+				   "pcie phy linkdown %x\n", status);
 			if (netif_running(adapter->netdev)) {
 				/* reset MAC */
 				atl1e_irq_reset(adapter);
@@ -1297,9 +1288,9 @@ static irqreturn_t atl1e_intr(int irq, void *data)
 
 		/* check if DMA read/write error */
 		if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
-			dev_err(&pdev->dev,
-				"PCIE DMA RW error (status = 0x%x)\n",
-				status);
+			netdev_err(adapter->netdev,
+				   "PCIE DMA RW error (status = 0x%x)\n",
+				   status);
 			atl1e_irq_reset(adapter);
 			schedule_work(&adapter->reset_task);
 			break;
@@ -1382,7 +1373,6 @@ static struct atl1e_rx_page *atl1e_get_rx_page(struct atl1e_adapter *adapter,
 static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
 		   int *work_done, int work_to_do)
 {
-	struct pci_dev *pdev = adapter->pdev;
 	struct net_device *netdev  = adapter->netdev;
 	struct atl1e_rx_ring *rx_ring = (struct atl1e_rx_ring *)
 					 &adapter->rx_ring;
@@ -1404,11 +1394,10 @@ static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
 						 rx_page->read_offset);
 			/* check sequence number */
 			if (prrs->seq_num != rx_page_desc[que].rx_nxseq) {
-				dev_err(&pdev->dev,
-					"rx sequence number"
-					" error (rx=%d) (expect=%d)\n",
-					prrs->seq_num,
-					rx_page_desc[que].rx_nxseq);
+				netdev_err(netdev,
+					   "rx sequence number error (rx=%d) (expect=%d)\n",
+					   prrs->seq_num,
+					   rx_page_desc[que].rx_nxseq);
 				rx_page_desc[que].rx_nxseq++;
 				/* just for debug use */
 				AT_WRITE_REG(&adapter->hw, REG_DEBUG_DATA0,
@@ -1424,9 +1413,9 @@ static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
 					RRS_ERR_DRIBBLE | RRS_ERR_CODE |
 					RRS_ERR_TRUNC)) {
 				/* hardware error, discard this packet*/
-					dev_err(&pdev->dev,
-						"rx packet desc error %x\n",
-						*((u32 *)prrs + 1));
+					netdev_err(netdev,
+						   "rx packet desc error %x\n",
+						   *((u32 *)prrs + 1));
 					goto skip_pkt;
 				}
 			}
@@ -1435,8 +1424,8 @@ static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
 					RRS_PKT_SIZE_MASK) - 4; /* CRC */
 			skb = netdev_alloc_skb_ip_align(netdev, packet_size);
 			if (skb == NULL) {
-				dev_warn(&pdev->dev, "%s: Memory squeeze,"
-					"deferring packet.\n", netdev->name);
+				netdev_warn(netdev,
+					    "Memory squeeze, deferring packet\n");
 				goto skip_pkt;
 			}
 			skb->dev = netdev;
@@ -1450,9 +1439,9 @@ static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
 				u16 vlan_tag = (prrs->vtag >> 4) |
 					       ((prrs->vtag & 7) << 13) |
 					       ((prrs->vtag & 8) << 9);
-				dev_dbg(&pdev->dev,
-					"RXD VLAN TAG<RRD>=0x%04x\n",
-					prrs->vtag);
+				netdev_dbg(netdev,
+					   "RXD VLAN TAG<RRD>=0x%04x\n",
+					   prrs->vtag);
 				vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
 							 vlan_tag);
 			} else {
@@ -1500,7 +1489,6 @@ static int atl1e_clean(struct napi_struct *napi, int budget)
 {
 	struct atl1e_adapter *adapter =
 			container_of(napi, struct atl1e_adapter, napi);
-	struct pci_dev    *pdev    = adapter->pdev;
 	u32 imr_data;
 	int work_done = 0;
 
@@ -1519,8 +1507,8 @@ quit_polling:
 		/* test debug */
 		if (test_bit(__AT_DOWN, &adapter->flags)) {
 			atomic_dec(&adapter->irq_sem);
-			dev_err(&pdev->dev,
-				"atl1e_clean is called when AT_DOWN\n");
+			netdev_err(adapter->netdev,
+				   "atl1e_clean is called when AT_DOWN\n");
 		}
 		/* reenable RX intr */
 		/*atl1e_irq_enable(adapter); */
@@ -1618,7 +1606,6 @@ static u16 atl1e_cal_tdp_req(const struct sk_buff *skb)
 static int atl1e_tso_csum(struct atl1e_adapter *adapter,
 		       struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
 {
-	struct pci_dev *pdev = adapter->pdev;
 	u8 hdr_len;
 	u32 real_len;
 	unsigned short offload_type;
@@ -1642,8 +1629,8 @@ static int atl1e_tso_csum(struct atl1e_adapter *adapter,
 			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
 			if (unlikely(skb->len == hdr_len)) {
 				/* only xsum need */
-				dev_warn(&pdev->dev,
-				      "IPV4 tso with zero data??\n");
+				netdev_warn(adapter->netdev,
+					    "IPV4 tso with zero data??\n");
 				goto check_sum;
 			} else {
 				ip_hdr(skb)->check = 0;
@@ -1672,8 +1659,8 @@ check_sum:
 
 		cso = skb_transport_offset(skb);
 		if (unlikely(cso & 0x1)) {
-			dev_err(&adapter->pdev->dev,
-			   "pay load offset should not ant event number\n");
+			netdev_err(adapter->netdev,
+				   "payload offset should not ant event number\n");
 			return -1;
 		} else {
 			css = cso + skb->csum_offset;
@@ -1886,8 +1873,8 @@ static int atl1e_request_irq(struct atl1e_adapter *adapter)
 	adapter->have_msi = true;
 	err = pci_enable_msi(adapter->pdev);
 	if (err) {
-		dev_dbg(&pdev->dev,
-			"Unable to allocate MSI interrupt Error: %d\n", err);
+		netdev_dbg(adapter->netdev,
+			   "Unable to allocate MSI interrupt Error: %d\n", err);
 		adapter->have_msi = false;
 	} else
 		netdev->irq = pdev->irq;
@@ -1898,13 +1885,13 @@ static int atl1e_request_irq(struct atl1e_adapter *adapter)
 	err = request_irq(adapter->pdev->irq, atl1e_intr, flags,
 			netdev->name, netdev);
 	if (err) {
-		dev_dbg(&pdev->dev,
-			"Unable to allocate interrupt Error: %d\n", err);
+		netdev_dbg(adapter->netdev,
+			   "Unable to allocate interrupt Error: %d\n", err);
 		if (adapter->have_msi)
 			pci_disable_msi(adapter->pdev);
 		return err;
 	}
-	dev_dbg(&pdev->dev, "atl1e_request_irq OK\n");
+	netdev_dbg(adapter->netdev, "atl1e_request_irq OK\n");
 	return err;
 }
 
@@ -2078,7 +2065,7 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
 		    (atl1e_write_phy_reg(hw,
 			   MII_ADVERTISE, mii_advertise_data) != 0) ||
 		    (atl1e_phy_commit(hw)) != 0) {
-			dev_dbg(&pdev->dev, "set phy register failed\n");
+			netdev_dbg(adapter->netdev, "set phy register failed\n");
 			goto wol_dis;
 		}
 
@@ -2100,17 +2087,14 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
 				}
 
 				if ((mii_bmsr_data & BMSR_LSTATUS) == 0)
-					dev_dbg(&pdev->dev,
-						"%s: Link may change"
-						"when suspend\n",
-						atl1e_driver_name);
+					netdev_dbg(adapter->netdev,
+						   "Link may change when suspend\n");
 			}
 			wol_ctrl_data |=  WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
 			/* only link up can wake up */
 			if (atl1e_write_phy_reg(hw, MII_INT_CTRL, 0x400) != 0) {
-				dev_dbg(&pdev->dev, "%s: read write phy "
-						  "register failed.\n",
-						  atl1e_driver_name);
+				netdev_dbg(adapter->netdev,
+					   "read write phy register failed\n");
 				goto wol_dis;
 			}
 		}
@@ -2131,9 +2115,8 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
 		if (wufc & AT_WUFC_MAG)
 			mac_ctrl_data |= MAC_CTRL_BC_EN;
 
-		dev_dbg(&pdev->dev,
-			"%s: suspend MAC=0x%x\n",
-			atl1e_driver_name, mac_ctrl_data);
+		netdev_dbg(adapter->netdev, "suspend MAC=0x%x\n",
+			   mac_ctrl_data);
 
 		AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
 		AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
@@ -2183,8 +2166,8 @@ static int atl1e_resume(struct pci_dev *pdev)
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		dev_err(&pdev->dev, "ATL1e: Cannot enable PCI"
-				" device from suspend\n");
+		netdev_err(adapter->netdev,
+			   "Cannot enable PCI device from suspend\n");
 		return err;
 	}
 
@@ -2315,7 +2298,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
 
 	err = atl1e_init_netdev(netdev, pdev);
 	if (err) {
-		dev_err(&pdev->dev, "init netdevice failed\n");
+		netdev_err(netdev, "init netdevice failed\n");
 		goto err_init_netdev;
 	}
 	adapter = netdev_priv(netdev);
@@ -2326,7 +2309,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
 	adapter->hw.hw_addr = pci_iomap(pdev, BAR_0, 0);
 	if (!adapter->hw.hw_addr) {
 		err = -EIO;
-		dev_err(&pdev->dev, "cannot map device registers\n");
+		netdev_err(netdev, "cannot map device registers\n");
 		goto err_ioremap;
 	}
 	netdev->base_addr = (unsigned long)adapter->hw.hw_addr;
@@ -2356,7 +2339,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
 	/* setup the private structure */
 	err = atl1e_sw_init(adapter);
 	if (err) {
-		dev_err(&pdev->dev, "net device private data init failed\n");
+		netdev_err(netdev, "net device private data init failed\n");
 		goto err_sw_init;
 	}
 
@@ -2372,19 +2355,19 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
 
 	if (atl1e_read_mac_addr(&adapter->hw) != 0) {
 		err = -EIO;
-		dev_err(&pdev->dev, "get mac address failed\n");
+		netdev_err(netdev, "get mac address failed\n");
 		goto err_eeprom;
 	}
 
 	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
-	dev_dbg(&pdev->dev, "mac address : %pM\n", adapter->hw.mac_addr);
+	netdev_dbg(netdev, "mac address : %pM\n", adapter->hw.mac_addr);
 
 	INIT_WORK(&adapter->reset_task, atl1e_reset_task);
 	INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
 	err = register_netdev(netdev);
 	if (err) {
-		dev_err(&pdev->dev, "register netdevice failed\n");
+		netdev_err(netdev, "register netdevice failed\n");
 		goto err_register;
 	}
 
@@ -2485,8 +2468,8 @@ static pci_ers_result_t atl1e_io_slot_reset(struct pci_dev *pdev)
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 
 	if (pci_enable_device(pdev)) {
-		dev_err(&pdev->dev,
-		       "ATL1e: Cannot re-enable PCI device after reset.\n");
+		netdev_err(adapter->netdev,
+			   "Cannot re-enable PCI device after reset\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	pci_set_master(pdev);
@@ -2514,8 +2497,8 @@ static void atl1e_io_resume(struct pci_dev *pdev)
 
 	if (netif_running(netdev)) {
 		if (atl1e_up(adapter)) {
-			dev_err(&pdev->dev,
-			  "ATL1e: can't bring device back up after reset\n");
+			netdev_err(adapter->netdev,
+				   "can't bring device back up after reset\n");
 			return;
 		}
 	}
diff --git a/drivers/net/atl1e/atl1e_param.c b/drivers/net/atl1e/atl1e_param.c
index b3be59fd3fb5..0ce60b6e7ef0 100644
--- a/drivers/net/atl1e/atl1e_param.c
+++ b/drivers/net/atl1e/atl1e_param.c
@@ -116,7 +116,7 @@ struct atl1e_option {
 	} arg;
 };
 
-static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct pci_dev *pdev)
+static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct atl1e_adapter *adapter)
 {
 	if (*value == OPTION_UNSET) {
 		*value = opt->def;
@@ -127,16 +127,19 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			dev_info(&pdev->dev, "%s Enabled\n", opt->name);
+			netdev_info(adapter->netdev,
+				    "%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			dev_info(&pdev->dev, "%s Disabled\n", opt->name);
+			netdev_info(adapter->netdev,
+				    "%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			dev_info(&pdev->dev, "%s set to %i\n", opt->name, *value);
+			netdev_info(adapter->netdev, "%s set to %i\n",
+				    opt->name, *value);
 			return 0;
 		}
 		break;
@@ -148,8 +151,8 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
 				ent = &opt->arg.l.p[i];
 				if (*value == ent->i) {
 					if (ent->str[0] != '\0')
-						dev_info(&pdev->dev, "%s\n",
-							ent->str);
+						netdev_info(adapter->netdev,
+							    "%s\n", ent->str);
 					return 0;
 				}
 			}
@@ -159,8 +162,8 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
 		BUG();
 	}
 
-	dev_info(&pdev->dev, "Invalid %s specified (%i) %s\n",
-			opt->name, *value, opt->err);
+	netdev_info(adapter->netdev, "Invalid %s specified (%i) %s\n",
+		    opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
 }
@@ -176,11 +179,13 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
  */
 void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 {
-	struct pci_dev *pdev = adapter->pdev;
 	int bd = adapter->bd_number;
+
 	if (bd >= ATL1E_MAX_NIC) {
-		dev_notice(&pdev->dev, "no configuration for board #%i\n", bd);
-		dev_notice(&pdev->dev, "Using defaults for all values\n");
+		netdev_notice(adapter->netdev,
+			      "no configuration for board #%i\n", bd);
+		netdev_notice(adapter->netdev,
+			      "Using defaults for all values\n");
 	}
 
 	{ 		/* Transmit Ring Size */
@@ -196,7 +201,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_tx_desc_cnt > bd) {
 			val = tx_desc_cnt[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->tx_ring.count = (u16) val & 0xFFFC;
 		} else
 			adapter->tx_ring.count = (u16)opt.def;
@@ -215,7 +220,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_rx_mem_size > bd) {
 			val = rx_mem_size[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->rx_ring.page_size = (u32)val * 1024;
 		} else {
 			adapter->rx_ring.page_size = (u32)opt.def * 1024;
@@ -235,7 +240,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_int_mod_timer > bd) {
 			val = int_mod_timer[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->hw.imt = (u16) val;
 		} else
 			adapter->hw.imt = (u16)(opt.def);
@@ -254,7 +259,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_media_type > bd) {
 			val = media_type[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->hw.media_type = (u16) val;
 		} else
 			adapter->hw.media_type = (u16)(opt.def);
-- 
cgit v1.2.3


From bf82c189a92f06967cf790d3ab0fc9827a9d00ff Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Feb 2010 11:49:50 +0000
Subject: drivers/net/r8196.c: Use netif_printk macros

Simplify the logic a bit, make the message logs a bit more consistent.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 136 +++++++++++++++++++---------------------------------
 1 file changed, 48 insertions(+), 88 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 85c635f354b5..616ae5aa66aa 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -744,12 +744,10 @@ static void rtl8169_check_link_status(struct net_device *dev,
 	spin_lock_irqsave(&tp->lock, flags);
 	if (tp->link_ok(ioaddr)) {
 		netif_carrier_on(dev);
-		if (netif_msg_ifup(tp))
-			printk(KERN_INFO PFX "%s: link up\n", dev->name);
+		netif_info(tp, ifup, dev, "link up\n");
 	} else {
-		if (netif_msg_ifdown(tp))
-			printk(KERN_INFO PFX "%s: link down\n", dev->name);
 		netif_carrier_off(dev);
+		netif_info(tp, ifdown, dev, "link down\n");
 	}
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
@@ -862,11 +860,8 @@ static int rtl8169_set_speed_tbi(struct net_device *dev,
 	} else if (autoneg == AUTONEG_ENABLE)
 		RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart);
 	else {
-		if (netif_msg_link(tp)) {
-			printk(KERN_WARNING "%s: "
-			       "incorrect speed setting refused in TBI mode\n",
-			       dev->name);
-		}
+		netif_warn(tp, link, dev,
+			   "incorrect speed setting refused in TBI mode\n");
 		ret = -EOPNOTSUPP;
 	}
 
@@ -901,9 +896,9 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 		    (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
 		    (tp->mac_version != RTL_GIGA_MAC_VER_16)) {
 			giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
-		} else if (netif_msg_link(tp)) {
-			printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
-			       dev->name);
+		} else {
+			netif_info(tp, link, dev,
+				   "PHY does not support 1000Mbps\n");
 		}
 
 		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
@@ -2705,8 +2700,7 @@ static void rtl8169_phy_timer(unsigned long __opaque)
 	if (tp->link_ok(ioaddr))
 		goto out_unlock;
 
-	if (netif_msg_link(tp))
-		printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name);
+	netif_warn(tp, link, dev, "PHY reset until link up\n");
 
 	tp->phy_reset_enable(ioaddr);
 
@@ -2776,8 +2770,7 @@ static void rtl8169_phy_reset(struct net_device *dev,
 			return;
 		msleep(1);
 	}
-	if (netif_msg_link(tp))
-		printk(KERN_ERR "%s: PHY reset failed.\n", dev->name);
+	netif_err(tp, link, dev, "PHY reset failed\n");
 }
 
 static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
@@ -2811,8 +2804,8 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 	 */
 	rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL);
 
-	if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp))
-		printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name);
+	if (RTL_R8(PHYstatus) & TBI_Enable)
+		netif_info(tp, link, dev, "TBI auto-negotiating\n");
 }
 
 static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
@@ -3012,8 +3005,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* enable device (incl. PCI PM wakeup and hotplug setup) */
 	rc = pci_enable_device(pdev);
 	if (rc < 0) {
-		if (netif_msg_probe(tp))
-			dev_err(&pdev->dev, "enable failure\n");
+		netif_err(tp, probe, dev, "enable failure\n");
 		goto err_out_free_dev_1;
 	}
 
@@ -3023,29 +3015,24 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
-		if (netif_msg_probe(tp)) {
-			dev_err(&pdev->dev,
-				"region #%d not an MMIO resource, aborting\n",
-				region);
-		}
+		netif_err(tp, probe, dev,
+			  "region #%d not an MMIO resource, aborting\n",
+			  region);
 		rc = -ENODEV;
 		goto err_out_mwi_3;
 	}
 
 	/* check for weird/broken PCI region reporting */
 	if (pci_resource_len(pdev, region) < R8169_REGS_SIZE) {
-		if (netif_msg_probe(tp)) {
-			dev_err(&pdev->dev,
-				"Invalid PCI region size(s), aborting\n");
-		}
+		netif_err(tp, probe, dev,
+			  "Invalid PCI region size(s), aborting\n");
 		rc = -ENODEV;
 		goto err_out_mwi_3;
 	}
 
 	rc = pci_request_regions(pdev, MODULENAME);
 	if (rc < 0) {
-		if (netif_msg_probe(tp))
-			dev_err(&pdev->dev, "could not request regions.\n");
+		netif_err(tp, probe, dev, "could not request regions\n");
 		goto err_out_mwi_3;
 	}
 
@@ -3058,10 +3045,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	} else {
 		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (rc < 0) {
-			if (netif_msg_probe(tp)) {
-				dev_err(&pdev->dev,
-					"DMA configuration failed.\n");
-			}
+			netif_err(tp, probe, dev, "DMA configuration failed\n");
 			goto err_out_free_res_4;
 		}
 	}
@@ -3069,15 +3053,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* ioremap MMIO region */
 	ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
 	if (!ioaddr) {
-		if (netif_msg_probe(tp))
-			dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
+		netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
 		rc = -EIO;
 		goto err_out_free_res_4;
 	}
 
 	tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	if (!tp->pcie_cap && netif_msg_probe(tp))
-		dev_info(&pdev->dev, "no PCI Express capability\n");
+	if (!tp->pcie_cap)
+		netif_info(tp, probe, dev, "no PCI Express capability\n");
 
 	RTL_W16(IntrMask, 0x0000);
 
@@ -3100,10 +3083,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Use appropriate default if unknown */
 	if (tp->mac_version == RTL_GIGA_MAC_NONE) {
-		if (netif_msg_probe(tp)) {
-			dev_notice(&pdev->dev,
-				   "unknown MAC, using family default\n");
-		}
+		netif_notice(tp, probe, dev,
+			     "unknown MAC, using family default\n");
 		tp->mac_version = cfg->default_ver;
 	}
 
@@ -3185,14 +3166,10 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, dev);
 
-	if (netif_msg_probe(tp)) {
-		u32 xid = RTL_R32(TxConfig) & 0x9cf0f8ff;
-
-		printk(KERN_INFO "%s: %s at 0x%lx, %pM, XID %08x IRQ %d\n",
-		       dev->name,
-		       rtl_chip_info[tp->chipset].name,
-		       dev->base_addr, dev->dev_addr, xid, dev->irq);
-	}
+	netif_info(tp, probe, dev, "%s at 0x%lx, %pM, XID %08x IRQ %d\n",
+		   rtl_chip_info[tp->chipset].name,
+		   dev->base_addr, dev->dev_addr,
+		   (u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
 
 	rtl8169_init_phy(dev, tp);
 
@@ -4131,10 +4108,10 @@ static void rtl8169_reinit_task(struct work_struct *work)
 
 	ret = rtl8169_open(dev);
 	if (unlikely(ret < 0)) {
-		if (net_ratelimit() && netif_msg_drv(tp)) {
-			printk(KERN_ERR PFX "%s: reinit failure (status = %d)."
-			       " Rescheduling.\n", dev->name, ret);
-		}
+		if (net_ratelimit())
+			netif_err(tp, drv, dev,
+				  "reinit failure (status = %d). Rescheduling\n",
+				  ret);
 		rtl8169_schedule_work(dev, rtl8169_reinit_task);
 	}
 
@@ -4164,10 +4141,8 @@ static void rtl8169_reset_task(struct work_struct *work)
 		netif_wake_queue(dev);
 		rtl8169_check_link_status(dev, tp, tp->mmio_addr);
 	} else {
-		if (net_ratelimit() && netif_msg_intr(tp)) {
-			printk(KERN_EMERG PFX "%s: Rx buffers shortage\n",
-			       dev->name);
-		}
+		if (net_ratelimit())
+			netif_emerg(tp, intr, dev, "Rx buffers shortage\n");
 		rtl8169_schedule_work(dev, rtl8169_reset_task);
 	}
 
@@ -4255,11 +4230,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 	u32 opts1;
 
 	if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
-		if (netif_msg_drv(tp)) {
-			printk(KERN_ERR
-			       "%s: BUG! Tx Ring full when queue awake!\n",
-			       dev->name);
-		}
+		netif_err(tp, drv, dev, "BUG! Tx Ring full when queue awake!\n");
 		goto err_stop;
 	}
 
@@ -4321,11 +4292,8 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
 	pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
 	pci_read_config_word(pdev, PCI_STATUS, &pci_status);
 
-	if (netif_msg_intr(tp)) {
-		printk(KERN_ERR
-		       "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n",
-		       dev->name, pci_cmd, pci_status);
-	}
+	netif_err(tp, intr, dev, "PCI error (cmd = 0x%04x, status = 0x%04x)\n",
+		  pci_cmd, pci_status);
 
 	/*
 	 * The recovery sequence below admits a very elaborated explanation:
@@ -4349,8 +4317,7 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
 
 	/* The infamous DAC f*ckup only happens at boot time */
 	if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
-		if (netif_msg_intr(tp))
-			printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name);
+		netif_info(tp, intr, dev, "disabling PCI DAC\n");
 		tp->cp_cmd &= ~PCIDAC;
 		RTL_W16(CPlusCmd, tp->cp_cmd);
 		dev->features &= ~NETIF_F_HIGHDMA;
@@ -4477,11 +4444,8 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 		if (status & DescOwn)
 			break;
 		if (unlikely(status & RxRES)) {
-			if (netif_msg_rx_err(tp)) {
-				printk(KERN_INFO
-				       "%s: Rx ERROR. status = %08x\n",
-				       dev->name, status);
-			}
+			netif_info(tp, rx_err, dev, "Rx ERROR. status = %08x\n",
+				   status);
 			dev->stats.rx_errors++;
 			if (status & (RxRWT | RxRUNT))
 				dev->stats.rx_length_errors++;
@@ -4544,8 +4508,8 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 	tp->cur_rx = cur_rx;
 
 	delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
-	if (!delta && count && netif_msg_intr(tp))
-		printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name);
+	if (!delta && count)
+		netif_info(tp, intr, dev, "no Rx buffer allocated\n");
 	tp->dirty_rx += delta;
 
 	/*
@@ -4555,8 +4519,8 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 	 *   after refill ?
 	 * - how do others driver handle this condition (Uh oh...).
 	 */
-	if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp))
-		printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name);
+	if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx)
+		netif_emerg(tp, intr, dev, "Rx buffers exhausted\n");
 
 	return count;
 }
@@ -4611,10 +4575,9 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 
 			if (likely(napi_schedule_prep(&tp->napi)))
 				__napi_schedule(&tp->napi);
-			else if (netif_msg_intr(tp)) {
-				printk(KERN_INFO "%s: interrupt %04x in poll\n",
-				dev->name, status);
-			}
+			else
+				netif_info(tp, intr, dev,
+					   "interrupt %04x in poll\n", status);
 		}
 
 		/* We only get a new MSI interrupt when all active irq
@@ -4750,10 +4713,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 		/* Unconditionally log net taps. */
-		if (netif_msg_link(tp)) {
-			printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
-			       dev->name);
-		}
+		netif_notice(tp, link, dev, "Promiscuous mode enabled\n");
 		rx_mode =
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
-- 
cgit v1.2.3


From f8502ce4f986a8fd486302980285b5e786b8dabe Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Feb 2010 11:49:51 +0000
Subject: drivers/net/jme: Use netif_printk helpers

Convert uses of msg_<type> to netif_<level>(
Remove msg_<type> macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/jme.c | 54 +++++++++++++++++++++++++++---------------------------
 drivers/net/jme.h | 41 +++++++----------------------------------
 2 files changed, 34 insertions(+), 61 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index d44c39dfbef1..558b6a0b15fc 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -288,7 +288,7 @@ jme_set_rx_pcc(struct jme_adapter *jme, int p)
 	wmb();
 
 	if (!(test_bit(JME_FLAG_POLL, &jme->flags)))
-		msg_rx_status(jme, "Switched to PCC_P%d\n", p);
+		netif_info(jme, rx_status, jme->dev, "Switched to PCC_P%d\n", p);
 }
 
 static void
@@ -483,13 +483,13 @@ jme_check_link(struct net_device *netdev, int testonly)
 		strcat(linkmsg, (phylink & PHY_LINK_MDI_STAT) ?
 					"MDI-X" :
 					"MDI");
-		msg_link(jme, "Link is up at %s.\n", linkmsg);
+		netif_info(jme, link, jme->dev, "Link is up at %s.\n", linkmsg);
 		netif_carrier_on(netdev);
 	} else {
 		if (testonly)
 			goto out;
 
-		msg_link(jme, "Link is down.\n");
+		netif_info(jme, link, jme->dev, "Link is down.\n");
 		jme->phylink = 0;
 		netif_carrier_off(netdev);
 	}
@@ -883,20 +883,20 @@ jme_rxsum_ok(struct jme_adapter *jme, u16 flags)
 	if (unlikely((flags & (RXWBFLAG_MF | RXWBFLAG_TCPON | RXWBFLAG_TCPCS))
 			== RXWBFLAG_TCPON)) {
 		if (flags & RXWBFLAG_IPV4)
-			msg_rx_err(jme, "TCP Checksum error\n");
+			netif_err(jme, rx_err, jme->dev, "TCP Checksum error\n");
 		return false;
 	}
 
 	if (unlikely((flags & (RXWBFLAG_MF | RXWBFLAG_UDPON | RXWBFLAG_UDPCS))
 			== RXWBFLAG_UDPON)) {
 		if (flags & RXWBFLAG_IPV4)
-			msg_rx_err(jme, "UDP Checksum error.\n");
+			netif_err(jme, rx_err, jme->dev, "UDP Checksum error.\n");
 		return false;
 	}
 
 	if (unlikely((flags & (RXWBFLAG_IPV4 | RXWBFLAG_IPCS))
 			== RXWBFLAG_IPV4)) {
-		msg_rx_err(jme, "IPv4 Checksum error.\n");
+		netif_err(jme, rx_err, jme->dev, "IPv4 Checksum error.\n");
 		return false;
 	}
 
@@ -1186,9 +1186,9 @@ jme_link_change_tasklet(unsigned long arg)
 
 	while (!atomic_dec_and_test(&jme->link_changing)) {
 		atomic_inc(&jme->link_changing);
-		msg_intr(jme, "Get link change lock failed.\n");
+		netif_info(jme, intr, jme->dev, "Get link change lock failed.\n");
 		while (atomic_read(&jme->link_changing) != 1)
-			msg_intr(jme, "Waiting link change lock.\n");
+			netif_info(jme, intr, jme->dev, "Waiting link change lock.\n");
 	}
 
 	if (jme_check_link(netdev, 1) && jme->old_mtu == netdev->mtu)
@@ -1305,7 +1305,7 @@ jme_rx_empty_tasklet(unsigned long arg)
 	if (unlikely(!netif_carrier_ok(jme->dev)))
 		return;
 
-	msg_rx_status(jme, "RX Queue Full!\n");
+	netif_info(jme, rx_status, jme->dev, "RX Queue Full!\n");
 
 	jme_rx_clean_tasklet(arg);
 
@@ -1325,7 +1325,7 @@ jme_wake_queue_if_stopped(struct jme_adapter *jme)
 	smp_wmb();
 	if (unlikely(netif_queue_stopped(jme->dev) &&
 	atomic_read(&txring->nr_free) >= (jme->tx_wake_threshold))) {
-		msg_tx_done(jme, "TX Queue Waked.\n");
+		netif_info(jme, tx_done, jme->dev, "TX Queue Waked.\n");
 		netif_wake_queue(jme->dev);
 	}
 
@@ -1835,7 +1835,7 @@ jme_tx_csum(struct jme_adapter *jme, struct sk_buff *skb, u8 *flags)
 			*flags |= TXFLAG_UDPCS;
 			break;
 		default:
-			msg_tx_err(jme, "Error upper layer protocol.\n");
+			netif_err(jme, tx_err, jme->dev, "Error upper layer protocol.\n");
 			break;
 		}
 	}
@@ -1910,12 +1910,12 @@ jme_stop_queue_if_full(struct jme_adapter *jme)
 	smp_wmb();
 	if (unlikely(atomic_read(&txring->nr_free) < (MAX_SKB_FRAGS+2))) {
 		netif_stop_queue(jme->dev);
-		msg_tx_queued(jme, "TX Queue Paused.\n");
+		netif_info(jme, tx_queued, jme->dev, "TX Queue Paused.\n");
 		smp_wmb();
 		if (atomic_read(&txring->nr_free)
 			>= (jme->tx_wake_threshold)) {
 			netif_wake_queue(jme->dev);
-			msg_tx_queued(jme, "TX Queue Fast Waked.\n");
+			netif_info(jme, tx_queued, jme->dev, "TX Queue Fast Waked.\n");
 		}
 	}
 
@@ -1923,7 +1923,7 @@ jme_stop_queue_if_full(struct jme_adapter *jme)
 			(jiffies - txbi->start_xmit) >= TX_TIMEOUT &&
 			txbi->skb)) {
 		netif_stop_queue(jme->dev);
-		msg_tx_queued(jme, "TX Queue Stopped %d@%lu.\n", idx, jiffies);
+		netif_info(jme, tx_queued, jme->dev, "TX Queue Stopped %d@%lu.\n", idx, jiffies);
 	}
 }
 
@@ -1946,7 +1946,7 @@ jme_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	if (unlikely(idx < 0)) {
 		netif_stop_queue(netdev);
-		msg_tx_err(jme, "BUG! Tx ring full when queue awake!\n");
+		netif_err(jme, tx_err, jme->dev, "BUG! Tx ring full when queue awake!\n");
 
 		return NETDEV_TX_BUSY;
 	}
@@ -2473,7 +2473,7 @@ jme_smb_read(struct jme_adapter *jme, unsigned int addr)
 		val = jread32(jme, JME_SMBCSR);
 	}
 	if (!to) {
-		msg_hw(jme, "SMB Bus Busy.\n");
+		netif_err(jme, hw, jme->dev, "SMB Bus Busy.\n");
 		return 0xFF;
 	}
 
@@ -2489,7 +2489,7 @@ jme_smb_read(struct jme_adapter *jme, unsigned int addr)
 		val = jread32(jme, JME_SMBINTF);
 	}
 	if (!to) {
-		msg_hw(jme, "SMB Bus Busy.\n");
+		netif_err(jme, hw, jme->dev, "SMB Bus Busy.\n");
 		return 0xFF;
 	}
 
@@ -2509,7 +2509,7 @@ jme_smb_write(struct jme_adapter *jme, unsigned int addr, u8 data)
 		val = jread32(jme, JME_SMBCSR);
 	}
 	if (!to) {
-		msg_hw(jme, "SMB Bus Busy.\n");
+		netif_err(jme, hw, jme->dev, "SMB Bus Busy.\n");
 		return;
 	}
 
@@ -2526,7 +2526,7 @@ jme_smb_write(struct jme_adapter *jme, unsigned int addr, u8 data)
 		val = jread32(jme, JME_SMBINTF);
 	}
 	if (!to) {
-		msg_hw(jme, "SMB Bus Busy.\n");
+		netif_err(jme, hw, jme->dev, "SMB Bus Busy.\n");
 		return;
 	}
 
@@ -2876,14 +2876,14 @@ jme_init_one(struct pci_dev *pdev,
 		goto err_out_unmap;
 	}
 
-	msg_probe(jme, "%s%s ver:%x rev:%x macaddr:%pM\n",
-		(jme->pdev->device == PCI_DEVICE_ID_JMICRON_JMC250) ?
-			"JMC250 Gigabit Ethernet" :
-			(jme->pdev->device == PCI_DEVICE_ID_JMICRON_JMC260) ?
-				"JMC260 Fast Ethernet" : "Unknown",
-		(jme->fpgaver != 0) ? " (FPGA)" : "",
-		(jme->fpgaver != 0) ? jme->fpgaver : jme->chiprev,
-		jme->rev, netdev->dev_addr);
+	netif_info(jme, probe, jme->dev, "%s%s ver:%x rev:%x macaddr:%pM\n",
+		   (jme->pdev->device == PCI_DEVICE_ID_JMICRON_JMC250) ?
+		   "JMC250 Gigabit Ethernet" :
+		   (jme->pdev->device == PCI_DEVICE_ID_JMICRON_JMC260) ?
+		   "JMC260 Fast Ethernet" : "Unknown",
+		   (jme->fpgaver != 0) ? " (FPGA)" : "",
+		   (jme->fpgaver != 0) ? jme->fpgaver : jme->chiprev,
+		   jme->rev, netdev->dev_addr);
 
 	return 0;
 
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index 251abed3817e..c19db9146a2f 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -45,43 +45,16 @@
 	printk(KERN_ERR PFX fmt, ## args)
 
 #ifdef TX_DEBUG
-#define tx_dbg(priv, fmt, args...) \
-	printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ## args)
+#define tx_dbg(priv, fmt, args...)					\
+	printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ##args)
 #else
-#define tx_dbg(priv, fmt, args...)
+#define tx_dbg(priv, fmt, args...)					\
+do {									\
+	if (0)								\
+		printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ##args); \
+} while (0)
 #endif
 
-#define jme_msg(msglvl, type, priv, fmt, args...) \
-	if (netif_msg_##type(priv)) \
-		printk(msglvl "%s: " fmt, (priv)->dev->name, ## args)
-
-#define msg_probe(priv, fmt, args...) \
-	jme_msg(KERN_INFO, probe, priv, fmt, ## args)
-
-#define msg_link(priv, fmt, args...) \
-	jme_msg(KERN_INFO, link, priv, fmt, ## args)
-
-#define msg_intr(priv, fmt, args...) \
-	jme_msg(KERN_INFO, intr, priv, fmt, ## args)
-
-#define msg_rx_err(priv, fmt, args...) \
-	jme_msg(KERN_ERR, rx_err, priv, fmt, ## args)
-
-#define msg_rx_status(priv, fmt, args...) \
-	jme_msg(KERN_INFO, rx_status, priv, fmt, ## args)
-
-#define msg_tx_err(priv, fmt, args...) \
-	jme_msg(KERN_ERR, tx_err, priv, fmt, ## args)
-
-#define msg_tx_done(priv, fmt, args...) \
-	jme_msg(KERN_INFO, tx_done, priv, fmt, ## args)
-
-#define msg_tx_queued(priv, fmt, args...) \
-	jme_msg(KERN_INFO, tx_queued, priv, fmt, ## args)
-
-#define msg_hw(priv, fmt, args...) \
-	jme_msg(KERN_ERR, hw, priv, fmt, ## args)
-
 /*
  * Extra PCI Configuration space interface
  */
-- 
cgit v1.2.3


From ae9540f75d5a69e7604cc5391cc0726b3aa82ff6 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Feb 2010 11:49:52 +0000
Subject: drivers/net/qlge: Use netif_printk helpers

Convert QPRINTK macros to netif_<level> equivalents.
Expands and standardizes the logging message output.
Removes __func__ from most logging messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h         |   8 -
 drivers/net/qlge/qlge_dbg.c     |  58 +--
 drivers/net/qlge/qlge_ethtool.c |  49 +--
 drivers/net/qlge/qlge_main.c    | 841 +++++++++++++++++++++-------------------
 drivers/net/qlge/qlge_mpi.c     | 183 +++++----
 5 files changed, 580 insertions(+), 559 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index ebfd17776b53..57d135e3bfaf 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -19,14 +19,6 @@
 #define DRV_VERSION	"v1.00.00.23.00.00-01"
 
 #define PFX "qlge: "
-#define QPRINTK(qdev, nlevel, klevel, fmt, args...)     \
-       do {       \
-	if (!((qdev)->msg_enable & NETIF_MSG_##nlevel))		\
-		;						\
-	else							\
-		dev_printk(KERN_##klevel, &((qdev)->pdev->dev),	\
-			   "%s: " fmt, __func__, ##args);  \
-       } while (0)
 
 #define WQ_ADDR_ALIGN	0x3	/* 4 byte alignment */
 
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 57df835147eb..ff8550d2ca82 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -443,8 +443,8 @@ static int ql_get_cam_entries(struct ql_adapter *qdev, u32 * buf)
 		status = ql_get_mac_addr_reg(qdev,
 					MAC_ADDR_TYPE_CAM_MAC, i, value);
 		if (status) {
-			QPRINTK(qdev, DRV, ERR,
-				"Failed read of mac index register.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "Failed read of mac index register.\n");
 			goto err;
 		}
 		*buf++ = value[0];	/* lower MAC address */
@@ -455,8 +455,8 @@ static int ql_get_cam_entries(struct ql_adapter *qdev, u32 * buf)
 		status = ql_get_mac_addr_reg(qdev,
 					MAC_ADDR_TYPE_MULTI_MAC, i, value);
 		if (status) {
-			QPRINTK(qdev, DRV, ERR,
-				"Failed read of mac index register.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "Failed read of mac index register.\n");
 			goto err;
 		}
 		*buf++ = value[0];	/* lower Mcast address */
@@ -479,8 +479,8 @@ static int ql_get_routing_entries(struct ql_adapter *qdev, u32 * buf)
 	for (i = 0; i < 16; i++) {
 		status = ql_get_routing_reg(qdev, i, &value);
 		if (status) {
-			QPRINTK(qdev, DRV, ERR,
-				"Failed read of routing index register.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "Failed read of routing index register.\n");
 			goto err;
 		} else {
 			*buf++ = value;
@@ -736,8 +736,7 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 	int i;
 
 	if (!mpi_coredump) {
-		QPRINTK(qdev, DRV, ERR,
-			"No memory available.\n");
+		netif_err(qdev, drv, qdev->ndev, "No memory available.\n");
 		return -ENOMEM;
 	}
 
@@ -749,8 +748,8 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 
 	status = ql_pause_mpi_risc(qdev);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed RISC pause. Status = 0x%.08x\n", status);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed RISC pause. Status = 0x%.08x\n", status);
 		goto err;
 	}
 
@@ -911,9 +910,9 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 
 	status = ql_get_serdes_regs(qdev, mpi_coredump);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed Dump of Serdes Registers. Status = 0x%.08x\n",
-			status);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Dump of Serdes Registers. Status = 0x%.08x\n",
+			  status);
 		goto err;
 	}
 
@@ -1177,16 +1176,16 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 	/* clear the pause */
 	status = ql_unpause_mpi_risc(qdev);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed RISC unpause. Status = 0x%.08x\n", status);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed RISC unpause. Status = 0x%.08x\n", status);
 		goto err;
 	}
 
 	/* Reset the RISC so we can dump RAM */
 	status = ql_hard_reset_mpi_risc(qdev);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed RISC reset. Status = 0x%.08x\n", status);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed RISC reset. Status = 0x%.08x\n", status);
 		goto err;
 	}
 
@@ -1198,8 +1197,9 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 	status = ql_dump_risc_ram_area(qdev, &mpi_coredump->code_ram[0],
 					CODE_RAM_ADDR, CODE_RAM_CNT);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed Dump of CODE RAM. Status = 0x%.08x\n", status);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Dump of CODE RAM. Status = 0x%.08x\n",
+			  status);
 		goto err;
 	}
 
@@ -1212,8 +1212,9 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 	status = ql_dump_risc_ram_area(qdev, &mpi_coredump->memc_ram[0],
 					MEMC_RAM_ADDR, MEMC_RAM_CNT);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed Dump of MEMC RAM. Status = 0x%.08x\n", status);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Dump of MEMC RAM. Status = 0x%.08x\n",
+			  status);
 		goto err;
 	}
 err:
@@ -1225,21 +1226,19 @@ err:
 static void ql_get_core_dump(struct ql_adapter *qdev)
 {
 	if (!ql_own_firmware(qdev)) {
-		QPRINTK(qdev, DRV, ERR, "%s: Don't own firmware!\n",
-					qdev->ndev->name);
+		netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n");
 		return;
 	}
 
 	if (!netif_running(qdev->ndev)) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Force Coredump can only be done from interface "
-			"that is up.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Force Coredump can only be done from interface that is up.\n");
 		return;
 	}
 
 	if (ql_mb_sys_err(qdev)) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Fail force coredump with ql_mb_sys_err().\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Fail force coredump with ql_mb_sys_err().\n");
 		return;
 	}
 }
@@ -1334,7 +1333,8 @@ void ql_mpi_core_to_log(struct work_struct *work)
 
 	count = sizeof(struct ql_mpi_coredump) / sizeof(u32);
 	tmp = (u32 *)qdev->mpi_coredump;
-	QPRINTK(qdev, DRV, DEBUG, "Core is dumping to log file!\n");
+	netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+		     "Core is dumping to log file!\n");
 
 	for (i = 0; i < count; i += 8) {
 		printk(KERN_ERR "%.08x: %.08x %.08x %.08x %.08x %.08x "
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 058fa0a48c6f..4f26afeb0f38 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -67,8 +67,8 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
-				QPRINTK(qdev, IFUP, ERR,
-					"Failed to load CQICB.\n");
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Failed to load CQICB.\n");
 				goto exit;
 			}
 		}
@@ -89,8 +89,8 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
-				QPRINTK(qdev, IFUP, ERR,
-					"Failed to load CQICB.\n");
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Failed to load CQICB.\n");
 				goto exit;
 			}
 		}
@@ -107,8 +107,8 @@ static void ql_update_stats(struct ql_adapter *qdev)
 
 	spin_lock(&qdev->stats_lock);
 	if (ql_sem_spinlock(qdev, qdev->xg_sem_mask)) {
-			QPRINTK(qdev, DRV, ERR,
-				"Couldn't get xgmac sem.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "Couldn't get xgmac sem.\n");
 		goto quit;
 	}
 	/*
@@ -116,8 +116,9 @@ static void ql_update_stats(struct ql_adapter *qdev)
 	 */
 	for (i = 0x200; i < 0x280; i += 8) {
 		if (ql_read_xgmac_reg64(qdev, i, &data)) {
-			QPRINTK(qdev, DRV, ERR,
-				"Error reading status register 0x%.04x.\n", i);
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
 			goto end;
 		} else
 			*iter = data;
@@ -129,8 +130,9 @@ static void ql_update_stats(struct ql_adapter *qdev)
 	 */
 	for (i = 0x300; i < 0x3d0; i += 8) {
 		if (ql_read_xgmac_reg64(qdev, i, &data)) {
-			QPRINTK(qdev, DRV, ERR,
-				"Error reading status register 0x%.04x.\n", i);
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
 			goto end;
 		} else
 			*iter = data;
@@ -142,8 +144,9 @@ static void ql_update_stats(struct ql_adapter *qdev)
 	 */
 	for (i = 0x500; i < 0x540; i += 8) {
 		if (ql_read_xgmac_reg64(qdev, i, &data)) {
-			QPRINTK(qdev, DRV, ERR,
-				"Error reading status register 0x%.04x.\n", i);
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
 			goto end;
 		} else
 			*iter = data;
@@ -155,8 +158,9 @@ static void ql_update_stats(struct ql_adapter *qdev)
 	 */
 	for (i = 0x568; i < 0x5a8; i += 8) {
 		if (ql_read_xgmac_reg64(qdev, i, &data)) {
-			QPRINTK(qdev, DRV, ERR,
-				"Error reading status register 0x%.04x.\n", i);
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
 			goto end;
 		} else
 			*iter = data;
@@ -167,8 +171,8 @@ static void ql_update_stats(struct ql_adapter *qdev)
 	 * Get RX NIC FIFO DROP statistics.
 	 */
 	if (ql_read_xgmac_reg64(qdev, 0x5b8, &data)) {
-		QPRINTK(qdev, DRV, ERR,
-			"Error reading status register 0x%.04x.\n", i);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Error reading status register 0x%.04x.\n", i);
 		goto end;
 	} else
 		*iter = data;
@@ -396,14 +400,13 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
 		return -EINVAL;
 	qdev->wol = wol->wolopts;
 
-	QPRINTK(qdev, DRV, INFO, "Set wol option 0x%x on %s\n",
-			 qdev->wol, ndev->name);
+	netif_info(qdev, drv, qdev->ndev, "Set wol option 0x%x\n", qdev->wol);
 	if (!qdev->wol) {
 		u32 wol = 0;
 		status = ql_mb_wol_mode(qdev, wol);
-		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
-			(status == 0) ? "cleared sucessfully" : "clear failed",
-			wol, qdev->ndev->name);
+		netif_err(qdev, drv, qdev->ndev, "WOL %s (wol code 0x%x)\n",
+			  status == 0 ? "cleared sucessfully" : "clear failed",
+			  wol);
 	}
 
 	return 0;
@@ -534,8 +537,8 @@ static void ql_self_test(struct net_device *ndev,
 		}
 		clear_bit(QL_SELFTEST, &qdev->flags);
 	} else {
-		QPRINTK(qdev, DRV, ERR,
-			"%s: is down, Loopback test will fail.\n", ndev->name);
+		netif_err(qdev, drv, qdev->ndev,
+			  "is down, Loopback test will fail.\n");
 		eth_test->flags |= ETH_TEST_FL_FAILED;
 	}
 }
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index dd3e0f1b2965..2c052caee884 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -128,7 +128,7 @@ static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask)
 		sem_bits = SEM_SET << SEM_PROC_REG_SHIFT;
 		break;
 	default:
-		QPRINTK(qdev, PROBE, ALERT, "Bad Semaphore mask!.\n");
+		netif_alert(qdev, probe, qdev->ndev, "bad Semaphore mask!.\n");
 		return -EINVAL;
 	}
 
@@ -168,17 +168,17 @@ int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 err_bit)
 
 		/* check for errors */
 		if (temp & err_bit) {
-			QPRINTK(qdev, PROBE, ALERT,
-				"register 0x%.08x access error, value = 0x%.08x!.\n",
-				reg, temp);
+			netif_alert(qdev, probe, qdev->ndev,
+				    "register 0x%.08x access error, value = 0x%.08x!.\n",
+				    reg, temp);
 			return -EIO;
 		} else if (temp & bit)
 			return 0;
 		udelay(UDELAY_DELAY);
 		count--;
 	}
-	QPRINTK(qdev, PROBE, ALERT,
-		"Timed out waiting for reg %x to come ready.\n", reg);
+	netif_alert(qdev, probe, qdev->ndev,
+		    "Timed out waiting for reg %x to come ready.\n", reg);
 	return -ETIMEDOUT;
 }
 
@@ -221,7 +221,7 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 
 	map = pci_map_single(qdev->pdev, ptr, size, direction);
 	if (pci_dma_mapping_error(qdev->pdev, map)) {
-		QPRINTK(qdev, IFUP, ERR, "Couldn't map DMA area.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Couldn't map DMA area.\n");
 		return -ENOMEM;
 	}
 
@@ -231,8 +231,8 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 
 	status = ql_wait_cfg(qdev, bit);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Timed out waiting for CFG to come ready.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Timed out waiting for CFG to come ready.\n");
 		goto exit;
 	}
 
@@ -313,8 +313,8 @@ int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index,
 	case MAC_ADDR_TYPE_VLAN:
 	case MAC_ADDR_TYPE_MULTI_FLTR:
 	default:
-		QPRINTK(qdev, IFUP, CRIT,
-			"Address type %d not yet supported.\n", type);
+		netif_crit(qdev, ifup, qdev->ndev,
+			   "Address type %d not yet supported.\n", type);
 		status = -EPERM;
 	}
 exit:
@@ -371,12 +371,11 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 			    (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
 			    (addr[5]);
 
-			QPRINTK(qdev, IFUP, DEBUG,
-				"Adding %s address %pM"
-				" at index %d in the CAM.\n",
-				((type ==
-				  MAC_ADDR_TYPE_MULTI_MAC) ? "MULTICAST" :
-				 "UNICAST"), addr, index);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "Adding %s address %pM at index %d in the CAM.\n",
+				     type == MAC_ADDR_TYPE_MULTI_MAC ?
+				     "MULTICAST" : "UNICAST",
+				     addr, index);
 
 			status =
 			    ql_wait_reg_rdy(qdev,
@@ -426,9 +425,11 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 			 * addressing. It's either MAC_ADDR_E on or off.
 			 * That's bit-27 we're talking about.
 			 */
-			QPRINTK(qdev, IFUP, INFO, "%s VLAN ID %d %s the CAM.\n",
-				(enable_bit ? "Adding" : "Removing"),
-				index, (enable_bit ? "to" : "from"));
+			netif_info(qdev, ifup, qdev->ndev,
+				   "%s VLAN ID %d %s the CAM.\n",
+				   enable_bit ? "Adding" : "Removing",
+				   index,
+				   enable_bit ? "to" : "from");
 
 			status =
 			    ql_wait_reg_rdy(qdev,
@@ -443,8 +444,8 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 		}
 	case MAC_ADDR_TYPE_MULTI_FLTR:
 	default:
-		QPRINTK(qdev, IFUP, CRIT,
-			"Address type %d not yet supported.\n", type);
+		netif_crit(qdev, ifup, qdev->ndev,
+			   "Address type %d not yet supported.\n", type);
 		status = -EPERM;
 	}
 exit:
@@ -463,14 +464,13 @@ static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
 
 	if (set) {
 		addr = &qdev->ndev->dev_addr[0];
-		QPRINTK(qdev, IFUP, DEBUG,
-			"Set Mac addr %pM\n", addr);
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Set Mac addr %pM\n", addr);
 	} else {
 		memset(zero_mac_addr, 0, ETH_ALEN);
 		addr = &zero_mac_addr[0];
-		QPRINTK(qdev, IFUP, DEBUG,
-				"Clearing MAC address on %s\n",
-				qdev->ndev->name);
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Clearing MAC address\n");
 	}
 	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
 	if (status)
@@ -479,23 +479,21 @@ static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
 			MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 	if (status)
-		QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
-			"address.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init mac address.\n");
 	return status;
 }
 
 void ql_link_on(struct ql_adapter *qdev)
 {
-	QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
-				 qdev->ndev->name);
+	netif_err(qdev, link, qdev->ndev, "Link is up.\n");
 	netif_carrier_on(qdev->ndev);
 	ql_set_mac_addr(qdev, 1);
 }
 
 void ql_link_off(struct ql_adapter *qdev)
 {
-	QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
-				 qdev->ndev->name);
+	netif_err(qdev, link, qdev->ndev, "Link is down.\n");
 	netif_carrier_off(qdev->ndev);
 	ql_set_mac_addr(qdev, 0);
 }
@@ -532,27 +530,27 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
 	int status = -EINVAL; /* Return error if no mask match. */
 	u32 value = 0;
 
-	QPRINTK(qdev, IFUP, DEBUG,
-		"%s %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s mask %s the routing reg.\n",
-		(enable ? "Adding" : "Removing"),
-		((index == RT_IDX_ALL_ERR_SLOT) ? "MAC ERROR/ALL ERROR" : ""),
-		((index == RT_IDX_IP_CSUM_ERR_SLOT) ? "IP CSUM ERROR" : ""),
-		((index ==
-		  RT_IDX_TCP_UDP_CSUM_ERR_SLOT) ? "TCP/UDP CSUM ERROR" : ""),
-		((index == RT_IDX_BCAST_SLOT) ? "BROADCAST" : ""),
-		((index == RT_IDX_MCAST_MATCH_SLOT) ? "MULTICAST MATCH" : ""),
-		((index == RT_IDX_ALLMULTI_SLOT) ? "ALL MULTICAST MATCH" : ""),
-		((index == RT_IDX_UNUSED6_SLOT) ? "UNUSED6" : ""),
-		((index == RT_IDX_UNUSED7_SLOT) ? "UNUSED7" : ""),
-		((index == RT_IDX_RSS_MATCH_SLOT) ? "RSS ALL/IPV4 MATCH" : ""),
-		((index == RT_IDX_RSS_IPV6_SLOT) ? "RSS IPV6" : ""),
-		((index == RT_IDX_RSS_TCP4_SLOT) ? "RSS TCP4" : ""),
-		((index == RT_IDX_RSS_TCP6_SLOT) ? "RSS TCP6" : ""),
-		((index == RT_IDX_CAM_HIT_SLOT) ? "CAM HIT" : ""),
-		((index == RT_IDX_UNUSED013) ? "UNUSED13" : ""),
-		((index == RT_IDX_UNUSED014) ? "UNUSED14" : ""),
-		((index == RT_IDX_PROMISCUOUS_SLOT) ? "PROMISCUOUS" : ""),
-		(enable ? "to" : "from"));
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+		     "%s %s mask %s the routing reg.\n",
+		     enable ? "Adding" : "Removing",
+		     index == RT_IDX_ALL_ERR_SLOT ? "MAC ERROR/ALL ERROR" :
+		     index == RT_IDX_IP_CSUM_ERR_SLOT ? "IP CSUM ERROR" :
+		     index == RT_IDX_TCP_UDP_CSUM_ERR_SLOT ? "TCP/UDP CSUM ERROR" :
+		     index == RT_IDX_BCAST_SLOT ? "BROADCAST" :
+		     index == RT_IDX_MCAST_MATCH_SLOT ? "MULTICAST MATCH" :
+		     index == RT_IDX_ALLMULTI_SLOT ? "ALL MULTICAST MATCH" :
+		     index == RT_IDX_UNUSED6_SLOT ? "UNUSED6" :
+		     index == RT_IDX_UNUSED7_SLOT ? "UNUSED7" :
+		     index == RT_IDX_RSS_MATCH_SLOT ? "RSS ALL/IPV4 MATCH" :
+		     index == RT_IDX_RSS_IPV6_SLOT ? "RSS IPV6" :
+		     index == RT_IDX_RSS_TCP4_SLOT ? "RSS TCP4" :
+		     index == RT_IDX_RSS_TCP6_SLOT ? "RSS TCP6" :
+		     index == RT_IDX_CAM_HIT_SLOT ? "CAM HIT" :
+		     index == RT_IDX_UNUSED013 ? "UNUSED13" :
+		     index == RT_IDX_UNUSED014 ? "UNUSED14" :
+		     index == RT_IDX_PROMISCUOUS_SLOT ? "PROMISCUOUS" :
+		     "(Bad index != RT_IDX)",
+		     enable ? "to" : "from");
 
 	switch (mask) {
 	case RT_IDX_CAM_HIT:
@@ -612,8 +610,8 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
 			break;
 		}
 	default:
-		QPRINTK(qdev, IFUP, ERR, "Mask type %d not yet supported.\n",
-			mask);
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Mask type %d not yet supported.\n", mask);
 		status = -EPERM;
 		goto exit;
 	}
@@ -719,7 +717,7 @@ static int ql_validate_flash(struct ql_adapter *qdev, u32 size, const char *str)
 
 	status = strncmp((char *)&qdev->flash, str, 4);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Invalid flash signature.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Invalid flash signature.\n");
 		return	status;
 	}
 
@@ -727,8 +725,8 @@ static int ql_validate_flash(struct ql_adapter *qdev, u32 size, const char *str)
 		csum += le16_to_cpu(*flash++);
 
 	if (csum)
-		QPRINTK(qdev, IFUP, ERR,
-			"Invalid flash checksum, csum = 0x%.04x.\n", csum);
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Invalid flash checksum, csum = 0x%.04x.\n", csum);
 
 	return csum;
 }
@@ -780,7 +778,8 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 	for (i = 0; i < size; i++, p++) {
 		status = ql_read_flash_word(qdev, i+offset, p);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Error reading flash.\n");
 			goto exit;
 		}
 	}
@@ -789,7 +788,7 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 			sizeof(struct flash_params_8000) / sizeof(u16),
 			"8000");
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Invalid flash.\n");
 		status = -EINVAL;
 		goto exit;
 	}
@@ -807,7 +806,7 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 			qdev->ndev->addr_len);
 
 	if (!is_valid_ether_addr(mac_addr)) {
-		QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Invalid MAC address.\n");
 		status = -EINVAL;
 		goto exit;
 	}
@@ -841,7 +840,8 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 	for (i = 0; i < size; i++, p++) {
 		status = ql_read_flash_word(qdev, i+offset, p);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Error reading flash.\n");
 			goto exit;
 		}
 
@@ -851,7 +851,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 			sizeof(struct flash_params_8012) / sizeof(u16),
 			"8012");
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Invalid flash.\n");
 		status = -EINVAL;
 		goto exit;
 	}
@@ -969,17 +969,17 @@ static int ql_8012_port_initialize(struct ql_adapter *qdev)
 		/* Another function has the semaphore, so
 		 * wait for the port init bit to come ready.
 		 */
-		QPRINTK(qdev, LINK, INFO,
-			"Another function has the semaphore, so wait for the port init bit to come ready.\n");
+		netif_info(qdev, link, qdev->ndev,
+			   "Another function has the semaphore, so wait for the port init bit to come ready.\n");
 		status = ql_wait_reg_rdy(qdev, STS, qdev->port_init, 0);
 		if (status) {
-			QPRINTK(qdev, LINK, CRIT,
-				"Port initialize timed out.\n");
+			netif_crit(qdev, link, qdev->ndev,
+				   "Port initialize timed out.\n");
 		}
 		return status;
 	}
 
-	QPRINTK(qdev, LINK, INFO, "Got xgmac semaphore!.\n");
+	netif_info(qdev, link, qdev->ndev, "Got xgmac semaphore!.\n");
 	/* Set the core reset. */
 	status = ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data);
 	if (status)
@@ -1109,8 +1109,8 @@ static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring,
 						GFP_ATOMIC,
 						qdev->lbq_buf_order);
 		if (unlikely(!rx_ring->pg_chunk.page)) {
-			QPRINTK(qdev, DRV, ERR,
-				"page allocation failed.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "page allocation failed.\n");
 			return -ENOMEM;
 		}
 		rx_ring->pg_chunk.offset = 0;
@@ -1120,8 +1120,8 @@ static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring,
 		if (pci_dma_mapping_error(qdev->pdev, map)) {
 			__free_pages(rx_ring->pg_chunk.page,
 					qdev->lbq_buf_order);
-			QPRINTK(qdev, DRV, ERR,
-				"PCI mapping failed.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "PCI mapping failed.\n");
 			return -ENOMEM;
 		}
 		rx_ring->pg_chunk.map = map;
@@ -1158,15 +1158,15 @@ static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 
 	while (rx_ring->lbq_free_cnt > 32) {
 		for (i = 0; i < 16; i++) {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"lbq: try cleaning clean_idx = %d.\n",
-				clean_idx);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "lbq: try cleaning clean_idx = %d.\n",
+				     clean_idx);
 			lbq_desc = &rx_ring->lbq[clean_idx];
 			if (ql_get_next_chunk(qdev, rx_ring, lbq_desc)) {
-				QPRINTK(qdev, IFUP, ERR,
-					"Could not get a page chunk.\n");
-					return;
-				}
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Could not get a page chunk.\n");
+				return;
+			}
 
 			map = lbq_desc->p.pg_chunk.map +
 				lbq_desc->p.pg_chunk.offset;
@@ -1191,9 +1191,9 @@ static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	}
 
 	if (start_idx != clean_idx) {
-		QPRINTK(qdev, RX_STATUS, DEBUG,
-			"lbq: updating prod idx = %d.\n",
-			rx_ring->lbq_prod_idx);
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "lbq: updating prod idx = %d.\n",
+			     rx_ring->lbq_prod_idx);
 		ql_write_db_reg(rx_ring->lbq_prod_idx,
 				rx_ring->lbq_prod_idx_db_reg);
 	}
@@ -1211,19 +1211,20 @@ static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	while (rx_ring->sbq_free_cnt > 16) {
 		for (i = 0; i < 16; i++) {
 			sbq_desc = &rx_ring->sbq[clean_idx];
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"sbq: try cleaning clean_idx = %d.\n",
-				clean_idx);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "sbq: try cleaning clean_idx = %d.\n",
+				     clean_idx);
 			if (sbq_desc->p.skb == NULL) {
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-					"sbq: getting new skb for index %d.\n",
-					sbq_desc->index);
+				netif_printk(qdev, rx_status, KERN_DEBUG,
+					     qdev->ndev,
+					     "sbq: getting new skb for index %d.\n",
+					     sbq_desc->index);
 				sbq_desc->p.skb =
 				    netdev_alloc_skb(qdev->ndev,
 						     SMALL_BUFFER_SIZE);
 				if (sbq_desc->p.skb == NULL) {
-					QPRINTK(qdev, PROBE, ERR,
-						"Couldn't get an skb.\n");
+					netif_err(qdev, probe, qdev->ndev,
+						  "Couldn't get an skb.\n");
 					rx_ring->sbq_clean_idx = clean_idx;
 					return;
 				}
@@ -1233,7 +1234,8 @@ static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 						     rx_ring->sbq_buf_size,
 						     PCI_DMA_FROMDEVICE);
 				if (pci_dma_mapping_error(qdev->pdev, map)) {
-					QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n");
+					netif_err(qdev, ifup, qdev->ndev,
+						  "PCI mapping failed.\n");
 					rx_ring->sbq_clean_idx = clean_idx;
 					dev_kfree_skb_any(sbq_desc->p.skb);
 					sbq_desc->p.skb = NULL;
@@ -1257,9 +1259,9 @@ static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	}
 
 	if (start_idx != clean_idx) {
-		QPRINTK(qdev, RX_STATUS, DEBUG,
-			"sbq: updating prod idx = %d.\n",
-			rx_ring->sbq_prod_idx);
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "sbq: updating prod idx = %d.\n",
+			     rx_ring->sbq_prod_idx);
 		ql_write_db_reg(rx_ring->sbq_prod_idx,
 				rx_ring->sbq_prod_idx_db_reg);
 	}
@@ -1291,8 +1293,9 @@ static void ql_unmap_send(struct ql_adapter *qdev,
 			 * then its an OAL.
 			 */
 			if (i == 7) {
-				QPRINTK(qdev, TX_DONE, DEBUG,
-					"unmapping OAL area.\n");
+				netif_printk(qdev, tx_done, KERN_DEBUG,
+					     qdev->ndev,
+					     "unmapping OAL area.\n");
 			}
 			pci_unmap_single(qdev->pdev,
 					 pci_unmap_addr(&tx_ring_desc->map[i],
@@ -1301,8 +1304,8 @@ static void ql_unmap_send(struct ql_adapter *qdev,
 						       maplen),
 					 PCI_DMA_TODEVICE);
 		} else {
-			QPRINTK(qdev, TX_DONE, DEBUG, "unmapping frag %d.\n",
-				i);
+			netif_printk(qdev, tx_done, KERN_DEBUG, qdev->ndev,
+				     "unmapping frag %d.\n", i);
 			pci_unmap_page(qdev->pdev,
 				       pci_unmap_addr(&tx_ring_desc->map[i],
 						      mapaddr),
@@ -1327,7 +1330,8 @@ static int ql_map_send(struct ql_adapter *qdev,
 	int frag_cnt = skb_shinfo(skb)->nr_frags;
 
 	if (frag_cnt) {
-		QPRINTK(qdev, TX_QUEUED, DEBUG, "frag_cnt = %d.\n", frag_cnt);
+		netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
+			     "frag_cnt = %d.\n", frag_cnt);
 	}
 	/*
 	 * Map the skb buffer first.
@@ -1336,8 +1340,8 @@ static int ql_map_send(struct ql_adapter *qdev,
 
 	err = pci_dma_mapping_error(qdev->pdev, map);
 	if (err) {
-		QPRINTK(qdev, TX_QUEUED, ERR,
-			"PCI mapping failed with error: %d\n", err);
+		netif_err(qdev, tx_queued, qdev->ndev,
+			  "PCI mapping failed with error: %d\n", err);
 
 		return NETDEV_TX_BUSY;
 	}
@@ -1383,9 +1387,9 @@ static int ql_map_send(struct ql_adapter *qdev,
 					     PCI_DMA_TODEVICE);
 			err = pci_dma_mapping_error(qdev->pdev, map);
 			if (err) {
-				QPRINTK(qdev, TX_QUEUED, ERR,
-					"PCI mapping outbound address list with error: %d\n",
-					err);
+				netif_err(qdev, tx_queued, qdev->ndev,
+					  "PCI mapping outbound address list with error: %d\n",
+					  err);
 				goto map_error;
 			}
 
@@ -1413,9 +1417,9 @@ static int ql_map_send(struct ql_adapter *qdev,
 
 		err = pci_dma_mapping_error(qdev->pdev, map);
 		if (err) {
-			QPRINTK(qdev, TX_QUEUED, ERR,
-				"PCI mapping frags failed with error: %d.\n",
-				err);
+			netif_err(qdev, tx_queued, qdev->ndev,
+				  "PCI mapping frags failed with error: %d.\n",
+				  err);
 			goto map_error;
 		}
 
@@ -1460,7 +1464,8 @@ static void ql_process_mac_rx_gro_page(struct ql_adapter *qdev,
 
 	skb = napi_get_frags(napi);
 	if (!skb) {
-		QPRINTK(qdev, DRV, ERR, "Couldn't get an skb, exiting.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Couldn't get an skb, exiting.\n");
 		rx_ring->rx_dropped++;
 		put_page(lbq_desc->p.pg_chunk.page);
 		return;
@@ -1503,8 +1508,8 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 
 	skb = netdev_alloc_skb(ndev, length);
 	if (!skb) {
-		QPRINTK(qdev, DRV, ERR, "Couldn't get an skb, "
-				"need to unwind!.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Couldn't get an skb, need to unwind!.\n");
 		rx_ring->rx_dropped++;
 		put_page(lbq_desc->p.pg_chunk.page);
 		return;
@@ -1516,8 +1521,8 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 
 	/* Frame error, so drop the packet. */
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
-		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
-				ib_mac_rsp->flags2);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Receive error, flags2 = 0x%x\n", ib_mac_rsp->flags2);
 		rx_ring->rx_errors++;
 		goto err_out;
 	}
@@ -1526,14 +1531,15 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 	 * MTU since FCoE uses 2k frames.
 	 */
 	if (skb->len > ndev->mtu + ETH_HLEN) {
-		QPRINTK(qdev, DRV, ERR, "Segment too small, dropping.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Segment too small, dropping.\n");
 		rx_ring->rx_dropped++;
 		goto err_out;
 	}
 	memcpy(skb_put(skb, ETH_HLEN), addr, ETH_HLEN);
-	QPRINTK(qdev, RX_STATUS, DEBUG,
-		"%d bytes of headers and data in large. Chain "
-		"page to new skb and pull tail.\n", length);
+	netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+		     "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
+		     length);
 	skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
 				lbq_desc->p.pg_chunk.offset+ETH_HLEN,
 				length-ETH_HLEN);
@@ -1550,8 +1556,8 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-					"TCP checksum done!\n");
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "TCP checksum done!\n");
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
 				(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
@@ -1560,8 +1566,9 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 			if (!(iph->frag_off &
 				cpu_to_be16(IP_MF|IP_OFFSET))) {
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-						"TCP checksum done!\n");
+				netif_printk(qdev, rx_status, KERN_DEBUG,
+					     qdev->ndev,
+					     "TCP checksum done!\n");
 			}
 		}
 	}
@@ -1600,8 +1607,8 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 	/* Allocate new_skb and copy */
 	new_skb = netdev_alloc_skb(qdev->ndev, length + NET_IP_ALIGN);
 	if (new_skb == NULL) {
-		QPRINTK(qdev, PROBE, ERR,
-			"No skb available, drop the packet.\n");
+		netif_err(qdev, probe, qdev->ndev,
+			  "No skb available, drop the packet.\n");
 		rx_ring->rx_dropped++;
 		return;
 	}
@@ -1611,8 +1618,8 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 
 	/* Frame error, so drop the packet. */
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
-		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
-					ib_mac_rsp->flags2);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Receive error, flags2 = 0x%x\n", ib_mac_rsp->flags2);
 		dev_kfree_skb_any(skb);
 		rx_ring->rx_errors++;
 		return;
@@ -1637,16 +1644,18 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 	prefetch(skb->data);
 	skb->dev = ndev;
 	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
-		QPRINTK(qdev, RX_STATUS, DEBUG, "%s%s%s Multicast.\n",
-			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
-			IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "",
-			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
-			IB_MAC_IOCB_RSP_M_REG ? "Registered" : "",
-			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
-			IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "%s Multicast.\n",
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_HASH ? "Hash" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_REG ? "Registered" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
 	}
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P)
-		QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "Promiscuous Packet.\n");
 
 	rx_ring->rx_packets++;
 	rx_ring->rx_bytes += skb->len;
@@ -1660,8 +1669,8 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-					"TCP checksum done!\n");
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "TCP checksum done!\n");
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
 				(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
@@ -1670,8 +1679,9 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 			if (!(iph->frag_off &
 				cpu_to_be16(IP_MF|IP_OFFSET))) {
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-						"TCP checksum done!\n");
+				netif_printk(qdev, rx_status, KERN_DEBUG,
+					     qdev->ndev,
+					     "TCP checksum done!\n");
 			}
 		}
 	}
@@ -1725,7 +1735,8 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 	 */
 	if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV &&
 	    ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
-		QPRINTK(qdev, RX_STATUS, DEBUG, "Header of %d bytes in small buffer.\n", hdr_len);
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "Header of %d bytes in small buffer.\n", hdr_len);
 		/*
 		 * Headers fit nicely into a small buffer.
 		 */
@@ -1744,15 +1755,16 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 	 * Handle the data buffer(s).
 	 */
 	if (unlikely(!length)) {	/* Is there data too? */
-		QPRINTK(qdev, RX_STATUS, DEBUG,
-			"No Data buffer in this packet.\n");
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "No Data buffer in this packet.\n");
 		return skb;
 	}
 
 	if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
 		if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Headers in small, data of %d bytes in small, combine them.\n", length);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Headers in small, data of %d bytes in small, combine them.\n",
+				     length);
 			/*
 			 * Data is less than small buffer size so it's
 			 * stuffed in a small buffer.
@@ -1778,8 +1790,9 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 							maplen),
 						       PCI_DMA_FROMDEVICE);
 		} else {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"%d bytes in a single small buffer.\n", length);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "%d bytes in a single small buffer.\n",
+				     length);
 			sbq_desc = ql_get_curr_sbuf(rx_ring);
 			skb = sbq_desc->p.skb;
 			ql_realign_skb(skb, length);
@@ -1794,18 +1807,18 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 		}
 	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
 		if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Header in small, %d bytes in large. Chain large to small!\n", length);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Header in small, %d bytes in large. Chain large to small!\n",
+				     length);
 			/*
 			 * The data is in a single large buffer.  We
 			 * chain it to the header buffer's skb and let
 			 * it rip.
 			 */
 			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Chaining page at offset = %d,"
-				"for %d bytes  to skb.\n",
-				lbq_desc->p.pg_chunk.offset, length);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Chaining page at offset = %d, for %d bytes  to skb.\n",
+				     lbq_desc->p.pg_chunk.offset, length);
 			skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
 						lbq_desc->p.pg_chunk.offset,
 						length);
@@ -1821,8 +1834,8 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
 			skb = netdev_alloc_skb(qdev->ndev, length);
 			if (skb == NULL) {
-				QPRINTK(qdev, PROBE, DEBUG,
-					"No skb available, drop the packet.\n");
+				netif_printk(qdev, probe, KERN_DEBUG, qdev->ndev,
+					     "No skb available, drop the packet.\n");
 				return NULL;
 			}
 			pci_unmap_page(qdev->pdev,
@@ -1831,8 +1844,9 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 				       pci_unmap_len(lbq_desc, maplen),
 				       PCI_DMA_FROMDEVICE);
 			skb_reserve(skb, NET_IP_ALIGN);
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"%d bytes of headers and data in large. Chain page to new skb and pull tail.\n", length);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
+				     length);
 			skb_fill_page_desc(skb, 0,
 						lbq_desc->p.pg_chunk.page,
 						lbq_desc->p.pg_chunk.offset,
@@ -1873,8 +1887,9 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			 * a local buffer and use it to find the
 			 * pages to chain.
 			 */
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"%d bytes of headers & data in chain of large.\n", length);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "%d bytes of headers & data in chain of large.\n",
+				     length);
 			skb = sbq_desc->p.skb;
 			sbq_desc->p.skb = NULL;
 			skb_reserve(skb, NET_IP_ALIGN);
@@ -1884,9 +1899,9 @@ static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
 			size = (length < rx_ring->lbq_buf_size) ? length :
 				rx_ring->lbq_buf_size;
 
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Adding page %d to skb for %d bytes.\n",
-				i, size);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Adding page %d to skb for %d bytes.\n",
+				     i, size);
 			skb_fill_page_desc(skb, i,
 						lbq_desc->p.pg_chunk.page,
 						lbq_desc->p.pg_chunk.offset,
@@ -1916,16 +1931,16 @@ static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 
 	skb = ql_build_rx_skb(qdev, rx_ring, ib_mac_rsp);
 	if (unlikely(!skb)) {
-		QPRINTK(qdev, RX_STATUS, DEBUG,
-			"No skb available, drop packet.\n");
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "No skb available, drop packet.\n");
 		rx_ring->rx_dropped++;
 		return;
 	}
 
 	/* Frame error, so drop the packet. */
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
-		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
-					ib_mac_rsp->flags2);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Receive error, flags2 = 0x%x\n", ib_mac_rsp->flags2);
 		dev_kfree_skb_any(skb);
 		rx_ring->rx_errors++;
 		return;
@@ -1950,17 +1965,18 @@ static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 	prefetch(skb->data);
 	skb->dev = ndev;
 	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
-		QPRINTK(qdev, RX_STATUS, DEBUG, "%s%s%s Multicast.\n",
-			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
-			IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "",
-			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
-			IB_MAC_IOCB_RSP_M_REG ? "Registered" : "",
-			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
-			IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev, "%s Multicast.\n",
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_HASH ? "Hash" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_REG ? "Registered" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
 		rx_ring->rx_multicast++;
 	}
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
-		QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "Promiscuous Packet.\n");
 	}
 
 	skb->protocol = eth_type_trans(skb, ndev);
@@ -1973,8 +1989,8 @@ static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-					"TCP checksum done!\n");
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "TCP checksum done!\n");
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
 				(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
@@ -1983,8 +1999,8 @@ static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 			if (!(iph->frag_off &
 				cpu_to_be16(IP_MF|IP_OFFSET))) {
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-						"TCP checksum done!\n");
+				netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+					     "TCP checksum done!\n");
 			}
 		}
 	}
@@ -2054,8 +2070,9 @@ static unsigned long ql_process_mac_rx_intr(struct ql_adapter *qdev,
 
 		/* Free small buffer that holds the IAL */
 		lbq_desc = ql_get_curr_sbuf(rx_ring);
-		QPRINTK(qdev, RX_ERR, ERR, "Dropping frame, len %d > mtu %d\n",
-			length, qdev->ndev->mtu);
+		netif_err(qdev, rx_err, qdev->ndev,
+			  "Dropping frame, len %d > mtu %d\n",
+			  length, qdev->ndev->mtu);
 
 		/* Unwind the large buffers for this frame. */
 		while (length > 0) {
@@ -2090,20 +2107,20 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
 					OB_MAC_IOCB_RSP_L |
 					OB_MAC_IOCB_RSP_P | OB_MAC_IOCB_RSP_B))) {
 		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_E) {
-			QPRINTK(qdev, TX_DONE, WARNING,
-				"Total descriptor length did not match transfer length.\n");
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "Total descriptor length did not match transfer length.\n");
 		}
 		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_S) {
-			QPRINTK(qdev, TX_DONE, WARNING,
-				"Frame too short to be legal, not sent.\n");
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "Frame too short to be valid, not sent.\n");
 		}
 		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_L) {
-			QPRINTK(qdev, TX_DONE, WARNING,
-				"Frame too long, but sent anyway.\n");
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "Frame too long, but sent anyway.\n");
 		}
 		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_B) {
-			QPRINTK(qdev, TX_DONE, WARNING,
-				"PCI backplane error. Frame not sent.\n");
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "PCI backplane error. Frame not sent.\n");
 		}
 	}
 	atomic_inc(&tx_ring->tx_count);
@@ -2133,33 +2150,35 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev,
 {
 	switch (ib_ae_rsp->event) {
 	case MGMT_ERR_EVENT:
-		QPRINTK(qdev, RX_ERR, ERR,
-			"Management Processor Fatal Error.\n");
+		netif_err(qdev, rx_err, qdev->ndev,
+			  "Management Processor Fatal Error.\n");
 		ql_queue_fw_error(qdev);
 		return;
 
 	case CAM_LOOKUP_ERR_EVENT:
-		QPRINTK(qdev, LINK, ERR,
-			"Multiple CAM hits lookup occurred.\n");
-		QPRINTK(qdev, DRV, ERR, "This event shouldn't occur.\n");
+		netif_err(qdev, link, qdev->ndev,
+			  "Multiple CAM hits lookup occurred.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "This event shouldn't occur.\n");
 		ql_queue_asic_error(qdev);
 		return;
 
 	case SOFT_ECC_ERROR_EVENT:
-		QPRINTK(qdev, RX_ERR, ERR, "Soft ECC error detected.\n");
+		netif_err(qdev, rx_err, qdev->ndev,
+			  "Soft ECC error detected.\n");
 		ql_queue_asic_error(qdev);
 		break;
 
 	case PCI_ERR_ANON_BUF_RD:
-		QPRINTK(qdev, RX_ERR, ERR,
-			"PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
-			ib_ae_rsp->q_id);
+		netif_err(qdev, rx_err, qdev->ndev,
+			  "PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
+			  ib_ae_rsp->q_id);
 		ql_queue_asic_error(qdev);
 		break;
 
 	default:
-		QPRINTK(qdev, DRV, ERR, "Unexpected event %d.\n",
-			ib_ae_rsp->event);
+		netif_err(qdev, drv, qdev->ndev, "Unexpected event %d.\n",
+			  ib_ae_rsp->event);
 		ql_queue_asic_error(qdev);
 		break;
 	}
@@ -2176,9 +2195,9 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
 	/* While there are entries in the completion queue. */
 	while (prod != rx_ring->cnsmr_idx) {
 
-		QPRINTK(qdev, RX_STATUS, DEBUG,
-			"cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id,
-			prod, rx_ring->cnsmr_idx);
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "cq_id = %d, prod = %d, cnsmr = %d.\n.",
+			     rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
 
 		net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry;
 		rmb();
@@ -2189,9 +2208,9 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
 			ql_process_mac_tx_intr(qdev, net_rsp);
 			break;
 		default:
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Hit default case, not handled! dropping the packet, opcode = %x.\n",
-				net_rsp->opcode);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Hit default case, not handled! dropping the packet, opcode = %x.\n",
+				     net_rsp->opcode);
 		}
 		count++;
 		ql_update_cq(rx_ring);
@@ -2223,9 +2242,9 @@ static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
 	/* While there are entries in the completion queue. */
 	while (prod != rx_ring->cnsmr_idx) {
 
-		QPRINTK(qdev, RX_STATUS, DEBUG,
-			"cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id,
-			prod, rx_ring->cnsmr_idx);
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "cq_id = %d, prod = %d, cnsmr = %d.\n.",
+			     rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
 
 		net_rsp = rx_ring->curr_entry;
 		rmb();
@@ -2241,11 +2260,10 @@ static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
 						net_rsp);
 			break;
 		default:
-			{
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-					"Hit default case, not handled! dropping the packet, opcode = %x.\n",
-					net_rsp->opcode);
-			}
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Hit default case, not handled! dropping the packet, opcode = %x.\n",
+				     net_rsp->opcode);
+			break;
 		}
 		count++;
 		ql_update_cq(rx_ring);
@@ -2266,8 +2284,8 @@ static int ql_napi_poll_msix(struct napi_struct *napi, int budget)
 	int i, work_done = 0;
 	struct intr_context *ctx = &qdev->intr_context[rx_ring->cq_id];
 
-	QPRINTK(qdev, RX_STATUS, DEBUG, "Enter, NAPI POLL cq_id = %d.\n",
-		rx_ring->cq_id);
+	netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+		     "Enter, NAPI POLL cq_id = %d.\n", rx_ring->cq_id);
 
 	/* Service the TX rings first.  They start
 	 * right after the RSS rings. */
@@ -2279,9 +2297,9 @@ static int ql_napi_poll_msix(struct napi_struct *napi, int budget)
 		if ((ctx->irq_mask & (1 << trx_ring->cq_id)) &&
 			(ql_read_sh_reg(trx_ring->prod_idx_sh_reg) !=
 					trx_ring->cnsmr_idx)) {
-			QPRINTK(qdev, INTR, DEBUG,
-				"%s: Servicing TX completion ring %d.\n",
-				__func__, trx_ring->cq_id);
+			netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
+				     "%s: Servicing TX completion ring %d.\n",
+				     __func__, trx_ring->cq_id);
 			ql_clean_outbound_rx_ring(trx_ring);
 		}
 	}
@@ -2291,9 +2309,9 @@ static int ql_napi_poll_msix(struct napi_struct *napi, int budget)
 	 */
 	if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
 					rx_ring->cnsmr_idx) {
-		QPRINTK(qdev, INTR, DEBUG,
-			"%s: Servicing RX completion ring %d.\n",
-			__func__, rx_ring->cq_id);
+		netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
+			     "%s: Servicing RX completion ring %d.\n",
+			     __func__, rx_ring->cq_id);
 		work_done = ql_clean_inbound_rx_ring(rx_ring, budget);
 	}
 
@@ -2310,12 +2328,13 @@ static void qlge_vlan_rx_register(struct net_device *ndev, struct vlan_group *gr
 
 	qdev->vlgrp = grp;
 	if (grp) {
-		QPRINTK(qdev, IFUP, DEBUG, "Turning on VLAN in NIC_RCV_CFG.\n");
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Turning on VLAN in NIC_RCV_CFG.\n");
 		ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK |
 			   NIC_RCV_CFG_VLAN_MATCH_AND_NON);
 	} else {
-		QPRINTK(qdev, IFUP, DEBUG,
-			"Turning off VLAN in NIC_RCV_CFG.\n");
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Turning off VLAN in NIC_RCV_CFG.\n");
 		ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK);
 	}
 }
@@ -2331,7 +2350,8 @@ static void qlge_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
 		return;
 	if (ql_set_mac_addr_reg
 	    (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init vlan address.\n");
 	}
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 }
@@ -2348,7 +2368,8 @@ static void qlge_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
 
 	if (ql_set_mac_addr_reg
 	    (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to clear vlan address.\n");
 	}
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 
@@ -2377,7 +2398,8 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 
 	spin_lock(&qdev->hw_lock);
 	if (atomic_read(&qdev->intr_context[0].irq_cnt)) {
-		QPRINTK(qdev, INTR, DEBUG, "Shared Interrupt, Not ours!\n");
+		netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
+			     "Shared Interrupt, Not ours!\n");
 		spin_unlock(&qdev->hw_lock);
 		return IRQ_NONE;
 	}
@@ -2390,10 +2412,11 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 	 */
 	if (var & STS_FE) {
 		ql_queue_asic_error(qdev);
-		QPRINTK(qdev, INTR, ERR, "Got fatal error, STS = %x.\n", var);
+		netif_err(qdev, intr, qdev->ndev,
+			  "Got fatal error, STS = %x.\n", var);
 		var = ql_read32(qdev, ERR_STS);
-		QPRINTK(qdev, INTR, ERR,
-			"Resetting chip. Error Status Register = 0x%x\n", var);
+		netif_err(qdev, intr, qdev->ndev,
+			  "Resetting chip. Error Status Register = 0x%x\n", var);
 		return IRQ_HANDLED;
 	}
 
@@ -2406,7 +2429,8 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 		 * We've got an async event or mailbox completion.
 		 * Handle it and clear the source of the interrupt.
 		 */
-		QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n");
+		netif_err(qdev, intr, qdev->ndev,
+			  "Got MPI processor interrupt.\n");
 		ql_disable_completion_interrupt(qdev, intr_context->intr);
 		ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
 		queue_delayed_work_on(smp_processor_id(),
@@ -2421,8 +2445,8 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 	 */
 	var = ql_read32(qdev, ISR1);
 	if (var & intr_context->irq_mask) {
-		QPRINTK(qdev, INTR, INFO,
-			"Waking handler for rx_ring[0].\n");
+		netif_info(qdev, intr, qdev->ndev,
+			   "Waking handler for rx_ring[0].\n");
 		ql_disable_completion_interrupt(qdev, intr_context->intr);
 		napi_schedule(&rx_ring->napi);
 		work_done++;
@@ -2519,9 +2543,9 @@ static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
 		return NETDEV_TX_OK;
 
 	if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
-		QPRINTK(qdev, TX_QUEUED, INFO,
-			"%s: shutting down tx queue %d du to lack of resources.\n",
-			__func__, tx_ring_idx);
+		netif_info(qdev, tx_queued, qdev->ndev,
+			   "%s: shutting down tx queue %d du to lack of resources.\n",
+			   __func__, tx_ring_idx);
 		netif_stop_subqueue(ndev, tx_ring->wq_id);
 		atomic_inc(&tx_ring->queue_stopped);
 		tx_ring->tx_errors++;
@@ -2542,8 +2566,8 @@ static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	mac_iocb_ptr->frame_len = cpu_to_le16((u16) skb->len);
 
 	if (qdev->vlgrp && vlan_tx_tag_present(skb)) {
-		QPRINTK(qdev, TX_QUEUED, DEBUG, "Adding a vlan tag %d.\n",
-			vlan_tx_tag_get(skb));
+		netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
+			     "Adding a vlan tag %d.\n", vlan_tx_tag_get(skb));
 		mac_iocb_ptr->flags3 |= OB_MAC_IOCB_V;
 		mac_iocb_ptr->vlan_tci = cpu_to_le16(vlan_tx_tag_get(skb));
 	}
@@ -2557,8 +2581,8 @@ static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	}
 	if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) !=
 			NETDEV_TX_OK) {
-		QPRINTK(qdev, TX_QUEUED, ERR,
-				"Could not map the segments.\n");
+		netif_err(qdev, tx_queued, qdev->ndev,
+			  "Could not map the segments.\n");
 		tx_ring->tx_errors++;
 		return NETDEV_TX_BUSY;
 	}
@@ -2569,8 +2593,9 @@ static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	wmb();
 
 	ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg);
-	QPRINTK(qdev, TX_QUEUED, DEBUG, "tx queued, slot %d, len %d\n",
-		tx_ring->prod_idx, skb->len);
+	netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
+		     "tx queued, slot %d, len %d\n",
+		     tx_ring->prod_idx, skb->len);
 
 	atomic_dec(&tx_ring->tx_count);
 	return NETDEV_TX_OK;
@@ -2601,8 +2626,8 @@ static int ql_alloc_shadow_space(struct ql_adapter *qdev)
 	    pci_alloc_consistent(qdev->pdev,
 				 PAGE_SIZE, &qdev->rx_ring_shadow_reg_dma);
 	if (qdev->rx_ring_shadow_reg_area == NULL) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Allocation of RX shadow space failed.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Allocation of RX shadow space failed.\n");
 		return -ENOMEM;
 	}
 	memset(qdev->rx_ring_shadow_reg_area, 0, PAGE_SIZE);
@@ -2610,8 +2635,8 @@ static int ql_alloc_shadow_space(struct ql_adapter *qdev)
 	    pci_alloc_consistent(qdev->pdev, PAGE_SIZE,
 				 &qdev->tx_ring_shadow_reg_dma);
 	if (qdev->tx_ring_shadow_reg_area == NULL) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Allocation of TX shadow space failed.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Allocation of TX shadow space failed.\n");
 		goto err_wqp_sh_area;
 	}
 	memset(qdev->tx_ring_shadow_reg_area, 0, PAGE_SIZE);
@@ -2665,7 +2690,7 @@ static int ql_alloc_tx_resources(struct ql_adapter *qdev,
 
 	if ((tx_ring->wq_base == NULL) ||
 	    tx_ring->wq_base_dma & WQ_ADDR_ALIGN) {
-		QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n");
+		netif_err(qdev, ifup, qdev->ndev, "tx_ring alloc failed.\n");
 		return -ENOMEM;
 	}
 	tx_ring->q =
@@ -2716,7 +2741,8 @@ static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring
 	for (i = 0; i < rx_ring->sbq_len; i++) {
 		sbq_desc = &rx_ring->sbq[i];
 		if (sbq_desc == NULL) {
-			QPRINTK(qdev, IFUP, ERR, "sbq_desc %d is NULL.\n", i);
+			netif_err(qdev, ifup, qdev->ndev,
+				  "sbq_desc %d is NULL.\n", i);
 			return;
 		}
 		if (sbq_desc->p.skb) {
@@ -2843,7 +2869,7 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev,
 				 &rx_ring->cq_base_dma);
 
 	if (rx_ring->cq_base == NULL) {
-		QPRINTK(qdev, IFUP, ERR, "rx_ring alloc failed.\n");
+		netif_err(qdev, ifup, qdev->ndev, "rx_ring alloc failed.\n");
 		return -ENOMEM;
 	}
 
@@ -2856,8 +2882,8 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev,
 					 &rx_ring->sbq_base_dma);
 
 		if (rx_ring->sbq_base == NULL) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Small buffer queue allocation failed.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Small buffer queue allocation failed.\n");
 			goto err_mem;
 		}
 
@@ -2868,8 +2894,8 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev,
 		    kmalloc(rx_ring->sbq_len * sizeof(struct bq_desc),
 			    GFP_KERNEL);
 		if (rx_ring->sbq == NULL) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Small buffer queue control block allocation failed.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Small buffer queue control block allocation failed.\n");
 			goto err_mem;
 		}
 
@@ -2885,8 +2911,8 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev,
 					 &rx_ring->lbq_base_dma);
 
 		if (rx_ring->lbq_base == NULL) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Large buffer queue allocation failed.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Large buffer queue allocation failed.\n");
 			goto err_mem;
 		}
 		/*
@@ -2896,8 +2922,8 @@ static int ql_alloc_rx_resources(struct ql_adapter *qdev,
 		    kmalloc(rx_ring->lbq_len * sizeof(struct bq_desc),
 			    GFP_KERNEL);
 		if (rx_ring->lbq == NULL) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Large buffer queue control block allocation failed.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Large buffer queue control block allocation failed.\n");
 			goto err_mem;
 		}
 
@@ -2926,10 +2952,10 @@ static void ql_tx_ring_clean(struct ql_adapter *qdev)
 		for (i = 0; i < tx_ring->wq_len; i++) {
 			tx_ring_desc = &tx_ring->q[i];
 			if (tx_ring_desc && tx_ring_desc->skb) {
-				QPRINTK(qdev, IFDOWN, ERR,
-				"Freeing lost SKB %p, from queue %d, index %d.\n",
-					tx_ring_desc->skb, j,
-					tx_ring_desc->index);
+				netif_err(qdev, ifdown, qdev->ndev,
+					  "Freeing lost SKB %p, from queue %d, index %d.\n",
+					  tx_ring_desc->skb, j,
+					  tx_ring_desc->index);
 				ql_unmap_send(qdev, tx_ring_desc,
 					      tx_ring_desc->map_cnt);
 				dev_kfree_skb(tx_ring_desc->skb);
@@ -2960,16 +2986,16 @@ static int ql_alloc_mem_resources(struct ql_adapter *qdev)
 
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		if (ql_alloc_rx_resources(qdev, &qdev->rx_ring[i]) != 0) {
-			QPRINTK(qdev, IFUP, ERR,
-				"RX resource allocation failed.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "RX resource allocation failed.\n");
 			goto err_mem;
 		}
 	}
 	/* Allocate tx queue resources */
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		if (ql_alloc_tx_resources(qdev, &qdev->tx_ring[i]) != 0) {
-			QPRINTK(qdev, IFUP, ERR,
-				"TX resource allocation failed.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "TX resource allocation failed.\n");
 			goto err_mem;
 		}
 	}
@@ -3104,14 +3130,15 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 		cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames);
 		break;
 	default:
-		QPRINTK(qdev, IFUP, DEBUG, "Invalid rx_ring->type = %d.\n",
-			rx_ring->type);
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Invalid rx_ring->type = %d.\n", rx_ring->type);
 	}
-	QPRINTK(qdev, IFUP, DEBUG, "Initializing rx work queue.\n");
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+		     "Initializing rx work queue.\n");
 	err = ql_write_cfg(qdev, cqicb, sizeof(struct cqicb),
 			   CFG_LCQ, rx_ring->cq_id);
 	if (err) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to load CQICB.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to load CQICB.\n");
 		return err;
 	}
 	return err;
@@ -3157,10 +3184,11 @@ static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
 	err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
 			   (u16) tx_ring->wq_id);
 	if (err) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to load tx_ring.\n");
 		return err;
 	}
-	QPRINTK(qdev, IFUP, DEBUG, "Successfully loaded WQICB.\n");
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+		     "Successfully loaded WQICB.\n");
 	return err;
 }
 
@@ -3214,15 +3242,15 @@ static void ql_enable_msix(struct ql_adapter *qdev)
 		if (err < 0) {
 			kfree(qdev->msi_x_entry);
 			qdev->msi_x_entry = NULL;
-			QPRINTK(qdev, IFUP, WARNING,
-				"MSI-X Enable failed, trying MSI.\n");
+			netif_warn(qdev, ifup, qdev->ndev,
+				   "MSI-X Enable failed, trying MSI.\n");
 			qdev->intr_count = 1;
 			qlge_irq_type = MSI_IRQ;
 		} else if (err == 0) {
 			set_bit(QL_MSIX_ENABLED, &qdev->flags);
-			QPRINTK(qdev, IFUP, INFO,
-				"MSI-X Enabled, got %d vectors.\n",
-				qdev->intr_count);
+			netif_info(qdev, ifup, qdev->ndev,
+				   "MSI-X Enabled, got %d vectors.\n",
+				   qdev->intr_count);
 			return;
 		}
 	}
@@ -3231,13 +3259,14 @@ msi:
 	if (qlge_irq_type == MSI_IRQ) {
 		if (!pci_enable_msi(qdev->pdev)) {
 			set_bit(QL_MSI_ENABLED, &qdev->flags);
-			QPRINTK(qdev, IFUP, INFO,
-				"Running with MSI interrupts.\n");
+			netif_info(qdev, ifup, qdev->ndev,
+				   "Running with MSI interrupts.\n");
 			return;
 		}
 	}
 	qlge_irq_type = LEG_IRQ;
-	QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n");
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+		     "Running with legacy interrupts.\n");
 }
 
 /* Each vector services 1 RSS ring and and 1 or more
@@ -3409,12 +3438,12 @@ static void ql_free_irq(struct ql_adapter *qdev)
 			if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
 				free_irq(qdev->msi_x_entry[i].vector,
 					 &qdev->rx_ring[i]);
-				QPRINTK(qdev, IFDOWN, DEBUG,
-					"freeing msix interrupt %d.\n", i);
+				netif_printk(qdev, ifdown, KERN_DEBUG, qdev->ndev,
+					     "freeing msix interrupt %d.\n", i);
 			} else {
 				free_irq(qdev->pdev->irq, &qdev->rx_ring[0]);
-				QPRINTK(qdev, IFDOWN, DEBUG,
-					"freeing msi interrupt %d.\n", i);
+				netif_printk(qdev, ifdown, KERN_DEBUG, qdev->ndev,
+					     "freeing msi interrupt %d.\n", i);
 			}
 		}
 	}
@@ -3439,32 +3468,33 @@ static int ql_request_irq(struct ql_adapter *qdev)
 					     intr_context->name,
 					     &qdev->rx_ring[i]);
 			if (status) {
-				QPRINTK(qdev, IFUP, ERR,
-					"Failed request for MSIX interrupt %d.\n",
-					i);
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Failed request for MSIX interrupt %d.\n",
+					  i);
 				goto err_irq;
 			} else {
-				QPRINTK(qdev, IFUP, DEBUG,
-					"Hooked intr %d, queue type %s%s%s, with name %s.\n",
-					i,
-					qdev->rx_ring[i].type ==
-					DEFAULT_Q ? "DEFAULT_Q" : "",
-					qdev->rx_ring[i].type ==
-					TX_Q ? "TX_Q" : "",
-					qdev->rx_ring[i].type ==
-					RX_Q ? "RX_Q" : "", intr_context->name);
+				netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+					     "Hooked intr %d, queue type %s, with name %s.\n",
+					     i,
+					     qdev->rx_ring[i].type == DEFAULT_Q ?
+					     "DEFAULT_Q" :
+					     qdev->rx_ring[i].type == TX_Q ?
+					     "TX_Q" :
+					     qdev->rx_ring[i].type == RX_Q ?
+					     "RX_Q" : "",
+					     intr_context->name);
 			}
 		} else {
-			QPRINTK(qdev, IFUP, DEBUG,
-				"trying msi or legacy interrupts.\n");
-			QPRINTK(qdev, IFUP, DEBUG,
-				"%s: irq = %d.\n", __func__, pdev->irq);
-			QPRINTK(qdev, IFUP, DEBUG,
-				"%s: context->name = %s.\n", __func__,
-			       intr_context->name);
-			QPRINTK(qdev, IFUP, DEBUG,
-				"%s: dev_id = 0x%p.\n", __func__,
-			       &qdev->rx_ring[0]);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "trying msi or legacy interrupts.\n");
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "%s: irq = %d.\n", __func__, pdev->irq);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "%s: context->name = %s.\n", __func__,
+				     intr_context->name);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "%s: dev_id = 0x%p.\n", __func__,
+				     &qdev->rx_ring[0]);
 			status =
 			    request_irq(pdev->irq, qlge_isr,
 					test_bit(QL_MSI_ENABLED,
@@ -3474,20 +3504,20 @@ static int ql_request_irq(struct ql_adapter *qdev)
 			if (status)
 				goto err_irq;
 
-			QPRINTK(qdev, IFUP, ERR,
-				"Hooked intr %d, queue type %s%s%s, with name %s.\n",
-				i,
-				qdev->rx_ring[0].type ==
-				DEFAULT_Q ? "DEFAULT_Q" : "",
-				qdev->rx_ring[0].type == TX_Q ? "TX_Q" : "",
-				qdev->rx_ring[0].type == RX_Q ? "RX_Q" : "",
-				intr_context->name);
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Hooked intr %d, queue type %s, with name %s.\n",
+				  i,
+				  qdev->rx_ring[0].type == DEFAULT_Q ?
+				  "DEFAULT_Q" :
+				  qdev->rx_ring[0].type == TX_Q ? "TX_Q" :
+				  qdev->rx_ring[0].type == RX_Q ? "RX_Q" : "",
+				  intr_context->name);
 		}
 		intr_context->hooked = 1;
 	}
 	return status;
 err_irq:
-	QPRINTK(qdev, IFUP, ERR, "Failed to get the interrupts!!!/n");
+	netif_err(qdev, ifup, qdev->ndev, "Failed to get the interrupts!!!/n");
 	ql_free_irq(qdev);
 	return status;
 }
@@ -3521,14 +3551,15 @@ static int ql_start_rss(struct ql_adapter *qdev)
 	memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
 	memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
 
-	QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev, "Initializing RSS.\n");
 
 	status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to load RICB.\n");
 		return status;
 	}
-	QPRINTK(qdev, IFUP, DEBUG, "Successfully loaded RICB.\n");
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+		     "Successfully loaded RICB.\n");
 	return status;
 }
 
@@ -3543,9 +3574,8 @@ static int ql_clear_routing_entries(struct ql_adapter *qdev)
 	for (i = 0; i < 16; i++) {
 		status = ql_set_routing_reg(qdev, i, 0, 0);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Failed to init routing register for CAM "
-				"packets.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init routing register for CAM packets.\n");
 			break;
 		}
 	}
@@ -3569,14 +3599,14 @@ static int ql_route_initialize(struct ql_adapter *qdev)
 
 	status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Failed to init routing register for error packets.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for error packets.\n");
 		goto exit;
 	}
 	status = ql_set_routing_reg(qdev, RT_IDX_BCAST_SLOT, RT_IDX_BCAST, 1);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Failed to init routing register for broadcast packets.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for broadcast packets.\n");
 		goto exit;
 	}
 	/* If we have more than one inbound queue, then turn on RSS in the
@@ -3586,8 +3616,8 @@ static int ql_route_initialize(struct ql_adapter *qdev)
 		status = ql_set_routing_reg(qdev, RT_IDX_RSS_MATCH_SLOT,
 					RT_IDX_RSS_MATCH, 1);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Failed to init routing register for MATCH RSS packets.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init routing register for MATCH RSS packets.\n");
 			goto exit;
 		}
 	}
@@ -3595,8 +3625,8 @@ static int ql_route_initialize(struct ql_adapter *qdev)
 	status = ql_set_routing_reg(qdev, RT_IDX_CAM_HIT_SLOT,
 				    RT_IDX_CAM_HIT, 1);
 	if (status)
-		QPRINTK(qdev, IFUP, ERR,
-			"Failed to init routing register for CAM packets.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for CAM packets.\n");
 exit:
 	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
 	return status;
@@ -3614,13 +3644,13 @@ int ql_cam_route_initialize(struct ql_adapter *qdev)
 	set &= qdev->port_link_up;
 	status = ql_set_mac_addr(qdev, set);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to init mac address.\n");
 		return status;
 	}
 
 	status = ql_route_initialize(qdev);
 	if (status)
-		QPRINTK(qdev, IFUP, ERR, "Failed to init routing table.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to init routing table.\n");
 
 	return status;
 }
@@ -3685,8 +3715,8 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Failed to start rx ring[%d].\n", i);
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to start rx ring[%d].\n", i);
 			return status;
 		}
 	}
@@ -3697,7 +3727,7 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	if (qdev->rss_ring_count > 1) {
 		status = ql_start_rss(qdev);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR, "Failed to start RSS.\n");
+			netif_err(qdev, ifup, qdev->ndev, "Failed to start RSS.\n");
 			return status;
 		}
 	}
@@ -3706,8 +3736,8 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		status = ql_start_tx_ring(qdev, &qdev->tx_ring[i]);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Failed to start tx ring[%d].\n", i);
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to start tx ring[%d].\n", i);
 			return status;
 		}
 	}
@@ -3715,20 +3745,20 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	/* Initialize the port and set the max framesize. */
 	status = qdev->nic_ops->port_initialize(qdev);
 	if (status)
-		QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to start port.\n");
 
 	/* Set up the MAC address and frame routing filter. */
 	status = ql_cam_route_initialize(qdev);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR,
-				"Failed to init CAM/Routing tables.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init CAM/Routing tables.\n");
 		return status;
 	}
 
 	/* Start NAPI for the RSS queues. */
 	for (i = 0; i < qdev->rss_ring_count; i++) {
-		QPRINTK(qdev, IFUP, DEBUG, "Enabling NAPI for rx_ring[%d].\n",
-			i);
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Enabling NAPI for rx_ring[%d].\n", i);
 		napi_enable(&qdev->rx_ring[i].napi);
 	}
 
@@ -3745,7 +3775,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 	/* Clear all the entries in the routing table. */
 	status = ql_clear_routing_entries(qdev);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Failed to clear routing bits.\n");
 		return status;
 	}
 
@@ -3768,8 +3798,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 	} while (time_before(jiffies, end_jiffies));
 
 	if (value & RST_FO_FR) {
-		QPRINTK(qdev, IFDOWN, ERR,
-			"ETIMEDOUT!!! errored out of resetting the chip!\n");
+		netif_err(qdev, ifdown, qdev->ndev,
+			  "ETIMEDOUT!!! errored out of resetting the chip!\n");
 		status = -ETIMEDOUT;
 	}
 
@@ -3782,16 +3812,17 @@ static void ql_display_dev_info(struct net_device *ndev)
 {
 	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
-	QPRINTK(qdev, PROBE, INFO,
-		"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
-		"XG Roll = %d, XG Rev = %d.\n",
-		qdev->func,
-		qdev->port,
-		qdev->chip_rev_id & 0x0000000f,
-		qdev->chip_rev_id >> 4 & 0x0000000f,
-		qdev->chip_rev_id >> 8 & 0x0000000f,
-		qdev->chip_rev_id >> 12 & 0x0000000f);
-	QPRINTK(qdev, PROBE, INFO, "MAC address %pM\n", ndev->dev_addr);
+	netif_info(qdev, probe, qdev->ndev,
+		   "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
+		   "XG Roll = %d, XG Rev = %d.\n",
+		   qdev->func,
+		   qdev->port,
+		   qdev->chip_rev_id & 0x0000000f,
+		   qdev->chip_rev_id >> 4 & 0x0000000f,
+		   qdev->chip_rev_id >> 8 & 0x0000000f,
+		   qdev->chip_rev_id >> 12 & 0x0000000f);
+	netif_info(qdev, probe, qdev->ndev,
+		   "MAC address %pM\n", ndev->dev_addr);
 }
 
 int ql_wol(struct ql_adapter *qdev)
@@ -3808,23 +3839,23 @@ int ql_wol(struct ql_adapter *qdev)
 
 	if (qdev->wol & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY | WAKE_UCAST |
 			WAKE_MCAST | WAKE_BCAST)) {
-		QPRINTK(qdev, IFDOWN, ERR,
-			"Unsupported WOL paramter. qdev->wol = 0x%x.\n",
-			qdev->wol);
+		netif_err(qdev, ifdown, qdev->ndev,
+			  "Unsupported WOL paramter. qdev->wol = 0x%x.\n",
+			  qdev->wol);
 		return -EINVAL;
 	}
 
 	if (qdev->wol & WAKE_MAGIC) {
 		status = ql_mb_wol_set_magic(qdev, 1);
 		if (status) {
-			QPRINTK(qdev, IFDOWN, ERR,
-				"Failed to set magic packet on %s.\n",
-				qdev->ndev->name);
+			netif_err(qdev, ifdown, qdev->ndev,
+				  "Failed to set magic packet on %s.\n",
+				  qdev->ndev->name);
 			return status;
 		} else
-			QPRINTK(qdev, DRV, INFO,
-				"Enabled magic packet successfully on %s.\n",
-				qdev->ndev->name);
+			netif_info(qdev, drv, qdev->ndev,
+				   "Enabled magic packet successfully on %s.\n",
+				   qdev->ndev->name);
 
 		wol |= MB_WOL_MAGIC_PKT;
 	}
@@ -3832,9 +3863,10 @@ int ql_wol(struct ql_adapter *qdev)
 	if (qdev->wol) {
 		wol |= MB_WOL_MODE_ON;
 		status = ql_mb_wol_mode(qdev, wol);
-		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
-			(status == 0) ? "Sucessfully set" : "Failed", wol,
-			qdev->ndev->name);
+		netif_err(qdev, drv, qdev->ndev,
+			  "WOL %s (wol code 0x%x) on %s\n",
+			  (status == 0) ? "Sucessfully set" : "Failed",
+			  wol, qdev->ndev->name);
 	}
 
 	return status;
@@ -3875,8 +3907,8 @@ static int ql_adapter_down(struct ql_adapter *qdev)
 
 	status = ql_adapter_reset(qdev);
 	if (status)
-		QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n",
-			qdev->func);
+		netif_err(qdev, ifdown, qdev->ndev, "reset(func #%d) FAILED!\n",
+			  qdev->func);
 	return status;
 }
 
@@ -3886,7 +3918,7 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 
 	err = ql_adapter_initialize(qdev);
 	if (err) {
-		QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
+		netif_info(qdev, ifup, qdev->ndev, "Unable to initialize adapter.\n");
 		goto err_init;
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3918,7 +3950,7 @@ static int ql_get_adapter_resources(struct ql_adapter *qdev)
 	int status = 0;
 
 	if (ql_alloc_mem_resources(qdev)) {
-		QPRINTK(qdev, IFUP, ERR, "Unable to  allocate memory.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Unable to  allocate memory.\n");
 		return -ENOMEM;
 	}
 	status = ql_request_irq(qdev);
@@ -3934,7 +3966,7 @@ static int qlge_close(struct net_device *ndev)
 	 * brought the adapter down.
 	 */
 	if (test_bit(QL_EEH_FATAL, &qdev->flags)) {
-		QPRINTK(qdev, DRV, ERR, "EEH fatal did unload.\n");
+		netif_err(qdev, drv, qdev->ndev, "EEH fatal did unload.\n");
 		clear_bit(QL_EEH_FATAL, &qdev->flags);
 		return 0;
 	}
@@ -4008,9 +4040,10 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 			rx_ring->lbq_size =
 			    rx_ring->lbq_len * sizeof(__le64);
 			rx_ring->lbq_buf_size = (u16)lbq_buf_len;
-			QPRINTK(qdev, IFUP, DEBUG,
-				"lbq_buf_size %d, order = %d\n",
-				rx_ring->lbq_buf_size, qdev->lbq_buf_order);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "lbq_buf_size %d, order = %d\n",
+				     rx_ring->lbq_buf_size,
+				     qdev->lbq_buf_order);
 			rx_ring->sbq_len = NUM_SMALL_BUFFERS;
 			rx_ring->sbq_size =
 			    rx_ring->sbq_len * sizeof(__le64);
@@ -4074,14 +4107,14 @@ static int ql_change_rx_buffers(struct ql_adapter *qdev)
 	if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
 		int i = 3;
 		while (i-- && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
-			QPRINTK(qdev, IFUP, ERR,
-				 "Waiting for adapter UP...\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Waiting for adapter UP...\n");
 			ssleep(1);
 		}
 
 		if (!i) {
-			QPRINTK(qdev, IFUP, ERR,
-			 "Timed out waiting for adapter UP\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Timed out waiting for adapter UP\n");
 			return -ETIMEDOUT;
 		}
 	}
@@ -4107,8 +4140,8 @@ static int ql_change_rx_buffers(struct ql_adapter *qdev)
 
 	return status;
 error:
-	QPRINTK(qdev, IFUP, ALERT,
-		"Driver up/down cycle failed, closing device.\n");
+	netif_alert(qdev, ifup, qdev->ndev,
+		    "Driver up/down cycle failed, closing device.\n");
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
 	dev_close(qdev->ndev);
 	return status;
@@ -4120,9 +4153,9 @@ static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
 	int status;
 
 	if (ndev->mtu == 1500 && new_mtu == 9000) {
-		QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Changing to jumbo MTU.\n");
 	} else if (ndev->mtu == 9000 && new_mtu == 1500) {
-		QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n");
+		netif_err(qdev, ifup, qdev->ndev, "Changing to normal MTU.\n");
 	} else
 		return -EINVAL;
 
@@ -4137,8 +4170,8 @@ static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
 
 	status = ql_change_rx_buffers(qdev);
 	if (status) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Changing MTU failed.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Changing MTU failed.\n");
 	}
 
 	return status;
@@ -4198,8 +4231,8 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		if (!test_bit(QL_PROMISCUOUS, &qdev->flags)) {
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) {
-				QPRINTK(qdev, HW, ERR,
-					"Failed to set promiscous mode.\n");
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to set promiscous mode.\n");
 			} else {
 				set_bit(QL_PROMISCUOUS, &qdev->flags);
 			}
@@ -4208,8 +4241,8 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		if (test_bit(QL_PROMISCUOUS, &qdev->flags)) {
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) {
-				QPRINTK(qdev, HW, ERR,
-					"Failed to clear promiscous mode.\n");
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to clear promiscous mode.\n");
 			} else {
 				clear_bit(QL_PROMISCUOUS, &qdev->flags);
 			}
@@ -4225,8 +4258,8 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		if (!test_bit(QL_ALLMULTI, &qdev->flags)) {
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) {
-				QPRINTK(qdev, HW, ERR,
-					"Failed to set all-multi mode.\n");
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to set all-multi mode.\n");
 			} else {
 				set_bit(QL_ALLMULTI, &qdev->flags);
 			}
@@ -4235,8 +4268,8 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		if (test_bit(QL_ALLMULTI, &qdev->flags)) {
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 0)) {
-				QPRINTK(qdev, HW, ERR,
-					"Failed to clear all-multi mode.\n");
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to clear all-multi mode.\n");
 			} else {
 				clear_bit(QL_ALLMULTI, &qdev->flags);
 			}
@@ -4251,16 +4284,16 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		     i++, mc_ptr = mc_ptr->next)
 			if (ql_set_mac_addr_reg(qdev, (u8 *) mc_ptr->dmi_addr,
 						MAC_ADDR_TYPE_MULTI_MAC, i)) {
-				QPRINTK(qdev, HW, ERR,
-					"Failed to loadmulticast address.\n");
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to loadmulticast address.\n");
 				ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 				goto exit;
 			}
 		ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 		if (ql_set_routing_reg
 		    (qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) {
-			QPRINTK(qdev, HW, ERR,
-				"Failed to set multicast match mode.\n");
+			netif_err(qdev, hw, qdev->ndev,
+				  "Failed to set multicast match mode.\n");
 		} else {
 			set_bit(QL_ALLMULTI, &qdev->flags);
 		}
@@ -4285,7 +4318,7 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p)
 	status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr,
 			MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
 	if (status)
-		QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n");
+		netif_err(qdev, hw, qdev->ndev, "Failed to load MAC address.\n");
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 	return status;
 }
@@ -4318,8 +4351,8 @@ static void ql_asic_reset_work(struct work_struct *work)
 	rtnl_unlock();
 	return;
 error:
-	QPRINTK(qdev, IFUP, ALERT,
-		"Driver up/down cycle failed, closing device\n");
+	netif_alert(qdev, ifup, qdev->ndev,
+		    "Driver up/down cycle failed, closing device\n");
 
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
 	dev_close(qdev->ndev);
@@ -4578,7 +4611,7 @@ static void ql_timer(unsigned long data)
 
 	var = ql_read32(qdev, STS);
 	if (pci_channel_offline(qdev->pdev)) {
-		QPRINTK(qdev, IFUP, ERR, "EEH STS = 0x%.08x.\n", var);
+		netif_err(qdev, ifup, qdev->ndev, "EEH STS = 0x%.08x.\n", var);
 		return;
 	}
 
@@ -4747,14 +4780,14 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
 
 	pci_restore_state(pdev);
 	if (pci_enable_device(pdev)) {
-		QPRINTK(qdev, IFUP, ERR,
-			"Cannot re-enable PCI device after reset.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Cannot re-enable PCI device after reset.\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	pci_set_master(pdev);
 
 	if (ql_adapter_reset(qdev)) {
-		QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
+		netif_err(qdev, drv, qdev->ndev, "reset FAILED!\n");
 		set_bit(QL_EEH_FATAL, &qdev->flags);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
@@ -4771,13 +4804,13 @@ static void qlge_io_resume(struct pci_dev *pdev)
 	if (netif_running(ndev)) {
 		err = qlge_open(ndev);
 		if (err) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Device initialization failed after reset.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Device initialization failed after reset.\n");
 			return;
 		}
 	} else {
-		QPRINTK(qdev, IFUP, ERR,
-			"Device was not running prior to EEH.\n");
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Device was not running prior to EEH.\n");
 	}
 	qdev->timer.expires = jiffies + (5*HZ);
 	add_timer(&qdev->timer);
@@ -4828,7 +4861,7 @@ static int qlge_resume(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 	err = pci_enable_device(pdev);
 	if (err) {
-		QPRINTK(qdev, IFUP, ERR, "Cannot enable PCI device from suspend\n");
+		netif_err(qdev, ifup, qdev->ndev, "Cannot enable PCI device from suspend\n");
 		return err;
 	}
 	pci_set_master(pdev);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index e2c846f17fc7..3c00462a5d22 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -135,7 +135,7 @@ static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
 		    ql_read_mpi_reg(qdev, qdev->mailbox_out + i,
 				     &mbcp->mbox_out[i]);
 		if (status) {
-			QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n");
+			netif_err(qdev, drv, qdev->ndev, "Failed mailbox read.\n");
 			break;
 		}
 	}
@@ -208,7 +208,7 @@ static int ql_idc_req_aen(struct ql_adapter *qdev)
 	int status;
 	struct mbox_params *mbcp = &qdev->idc_mbc;
 
-	QPRINTK(qdev, DRV, ERR, "Enter!\n");
+	netif_err(qdev, drv, qdev->ndev, "Enter!\n");
 	/* Get the status data and start up a thread to
 	 * handle the request.
 	 */
@@ -216,8 +216,8 @@ static int ql_idc_req_aen(struct ql_adapter *qdev)
 	mbcp->out_count = 4;
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Could not read MPI, resetting ASIC!\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Could not read MPI, resetting ASIC!\n");
 		ql_queue_asic_error(qdev);
 	} else	{
 		/* Begin polled mode early so
@@ -240,8 +240,8 @@ static int ql_idc_cmplt_aen(struct ql_adapter *qdev)
 	mbcp->out_count = 4;
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Could not read MPI, resetting RISC!\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Could not read MPI, resetting RISC!\n");
 		ql_queue_fw_error(qdev);
 	} else
 		/* Wake up the sleeping mpi_idc_work thread that is
@@ -259,13 +259,13 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
 
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"%s: Could not get mailbox status.\n", __func__);
+		netif_err(qdev, drv, qdev->ndev,
+			  "%s: Could not get mailbox status.\n", __func__);
 		return;
 	}
 
 	qdev->link_status = mbcp->mbox_out[1];
-	QPRINTK(qdev, DRV, ERR, "Link Up.\n");
+	netif_err(qdev, drv, qdev->ndev, "Link Up.\n");
 
 	/* If we're coming back from an IDC event
 	 * then set up the CAM and frame routing.
@@ -273,8 +273,8 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	if (test_bit(QL_CAM_RT_SET, &qdev->flags)) {
 		status = ql_cam_route_initialize(qdev);
 		if (status) {
-			QPRINTK(qdev, IFUP, ERR,
-			"Failed to init CAM/Routing tables.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init CAM/Routing tables.\n");
 			return;
 		} else
 			clear_bit(QL_CAM_RT_SET, &qdev->flags);
@@ -285,7 +285,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	 * to our liking.
 	 */
 	if (!test_bit(QL_PORT_CFG, &qdev->flags)) {
-		QPRINTK(qdev, DRV, ERR, "Queue Port Config Worker!\n");
+		netif_err(qdev, drv, qdev->ndev, "Queue Port Config Worker!\n");
 		set_bit(QL_PORT_CFG, &qdev->flags);
 		/* Begin polled mode early so
 		 * we don't get another interrupt
@@ -307,7 +307,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
 
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status)
-		QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
+		netif_err(qdev, drv, qdev->ndev, "Link down AEN broken!\n");
 
 	ql_link_off(qdev);
 }
@@ -320,9 +320,9 @@ static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
 
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status)
-		QPRINTK(qdev, DRV, ERR, "SFP in AEN broken!\n");
+		netif_err(qdev, drv, qdev->ndev, "SFP in AEN broken!\n");
 	else
-		QPRINTK(qdev, DRV, ERR, "SFP insertion detected.\n");
+		netif_err(qdev, drv, qdev->ndev, "SFP insertion detected.\n");
 
 	return status;
 }
@@ -335,9 +335,9 @@ static int ql_sfp_out(struct ql_adapter *qdev, struct mbox_params *mbcp)
 
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status)
-		QPRINTK(qdev, DRV, ERR, "SFP out AEN broken!\n");
+		netif_err(qdev, drv, qdev->ndev, "SFP out AEN broken!\n");
 	else
-		QPRINTK(qdev, DRV, ERR, "SFP removal detected.\n");
+		netif_err(qdev, drv, qdev->ndev, "SFP removal detected.\n");
 
 	return status;
 }
@@ -350,13 +350,13 @@ static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp)
 
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status)
-		QPRINTK(qdev, DRV, ERR, "Lost AEN broken!\n");
+		netif_err(qdev, drv, qdev->ndev, "Lost AEN broken!\n");
 	else {
 		int i;
-		QPRINTK(qdev, DRV, ERR, "Lost AEN detected.\n");
+		netif_err(qdev, drv, qdev->ndev, "Lost AEN detected.\n");
 		for (i = 0; i < mbcp->out_count; i++)
-			QPRINTK(qdev, DRV, ERR, "mbox_out[%d] = 0x%.08x.\n",
-					i, mbcp->mbox_out[i]);
+			netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n",
+				  i, mbcp->mbox_out[i]);
 
 	}
 
@@ -371,15 +371,15 @@ static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
 
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n");
+		netif_err(qdev, drv, qdev->ndev, "Firmware did not initialize!\n");
 	} else {
-		QPRINTK(qdev, DRV, ERR, "Firmware Revision  = 0x%.08x.\n",
-			mbcp->mbox_out[1]);
+		netif_err(qdev, drv, qdev->ndev, "Firmware Revision  = 0x%.08x.\n",
+			  mbcp->mbox_out[1]);
 		qdev->fw_rev_id = mbcp->mbox_out[1];
 		status = ql_cam_route_initialize(qdev);
 		if (status)
-			QPRINTK(qdev, IFUP, ERR,
-				"Failed to init CAM/Routing tables.\n");
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init CAM/Routing tables.\n");
 	}
 }
 
@@ -398,8 +398,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	mbcp->out_count = 1;
 	status = ql_get_mb_sts(qdev, mbcp);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Could not read MPI, resetting ASIC!\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Could not read MPI, resetting ASIC!\n");
 		ql_queue_asic_error(qdev);
 		goto end;
 	}
@@ -488,15 +488,14 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 			mbcp->mbox_out[0] = MB_CMD_STS_ERR;
 			return status;
 		}
-		QPRINTK(qdev, DRV, ERR,
-			"Firmware initialization failed.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Firmware initialization failed.\n");
 		status = -EIO;
 		ql_queue_fw_error(qdev);
 		break;
 
 	case AEN_SYS_ERR:
-		QPRINTK(qdev, DRV, ERR,
-			"System Error.\n");
+		netif_err(qdev, drv, qdev->ndev, "System Error.\n");
 		ql_queue_fw_error(qdev);
 		status = -EIO;
 		break;
@@ -509,8 +508,8 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 		/* Need to support AEN 8110 */
 		break;
 	default:
-		QPRINTK(qdev, DRV, ERR,
-			"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
+		netif_err(qdev, drv, qdev->ndev,
+			  "Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
 		/* Clear the MPI firmware status. */
 	}
 end:
@@ -583,8 +582,8 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 			goto done;
 	} while (time_before(jiffies, count));
 
-	QPRINTK(qdev, DRV, ERR,
-		"Timed out waiting for mailbox complete.\n");
+	netif_err(qdev, drv, qdev->ndev,
+		  "Timed out waiting for mailbox complete.\n");
 	status = -ETIMEDOUT;
 	goto end;
 
@@ -646,8 +645,8 @@ int ql_mb_about_fw(struct ql_adapter *qdev)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed about firmware command\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed about firmware command\n");
 		status = -EIO;
 	}
 
@@ -678,8 +677,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed Get Firmware State.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Get Firmware State.\n");
 		status = -EIO;
 	}
 
@@ -688,8 +687,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev)
 	 * happen.
 	 */
 	if (mbcp->mbox_out[1] & 1) {
-		QPRINTK(qdev, DRV, ERR,
-			"Firmware waiting for initialization.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Firmware waiting for initialization.\n");
 		status = -EIO;
 	}
 
@@ -721,8 +720,7 @@ int ql_mb_idc_ack(struct ql_adapter *qdev)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed IDC ACK send.\n");
+		netif_err(qdev, drv, qdev->ndev, "Failed IDC ACK send.\n");
 		status = -EIO;
 	}
 	return status;
@@ -753,11 +751,11 @@ int ql_mb_set_port_cfg(struct ql_adapter *qdev)
 		return status;
 
 	if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) {
-		QPRINTK(qdev, DRV, ERR,
-			"Port Config sent, wait for IDC.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Port Config sent, wait for IDC.\n");
 	} else	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed Set Port Configuration.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Set Port Configuration.\n");
 		status = -EIO;
 	}
 	return status;
@@ -791,8 +789,7 @@ int ql_mb_dump_ram(struct ql_adapter *qdev, u64 req_dma, u32 addr,
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed to dump risc RAM.\n");
+		netif_err(qdev, drv, qdev->ndev, "Failed to dump risc RAM.\n");
 		status = -EIO;
 	}
 	return status;
@@ -842,12 +839,12 @@ int ql_mb_get_port_cfg(struct ql_adapter *qdev)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed Get Port Configuration.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Get Port Configuration.\n");
 		status = -EIO;
 	} else	{
-		QPRINTK(qdev, DRV, DEBUG,
-			"Passed Get Port Configuration.\n");
+		netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+			     "Passed Get Port Configuration.\n");
 		qdev->link_config = mbcp->mbox_out[1];
 		qdev->max_frame_size = mbcp->mbox_out[2];
 	}
@@ -874,8 +871,7 @@ int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed to set WOL mode.\n");
+		netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
 		status = -EIO;
 	}
 	return status;
@@ -917,8 +913,7 @@ int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed to set WOL mode.\n");
+		netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
 		status = -EIO;
 	}
 	return status;
@@ -944,8 +939,7 @@ static int ql_idc_wait(struct ql_adapter *qdev)
 			wait_for_completion_timeout(&qdev->ide_completion,
 							wait_time);
 		if (!wait_time) {
-			QPRINTK(qdev, DRV, ERR,
-				"IDC Timeout.\n");
+			netif_err(qdev, drv, qdev->ndev, "IDC Timeout.\n");
 			break;
 		}
 		/* Now examine the response from the IDC process.
@@ -953,18 +947,17 @@ static int ql_idc_wait(struct ql_adapter *qdev)
 		 * more wait time.
 		 */
 		if (mbcp->mbox_out[0] == AEN_IDC_EXT) {
-			QPRINTK(qdev, DRV, ERR,
-				"IDC Time Extension from function.\n");
+			netif_err(qdev, drv, qdev->ndev,
+				  "IDC Time Extension from function.\n");
 			wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f;
 		} else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) {
-			QPRINTK(qdev, DRV, ERR,
-				"IDC Success.\n");
+			netif_err(qdev, drv, qdev->ndev, "IDC Success.\n");
 			status = 0;
 			break;
 		} else {
-			QPRINTK(qdev, DRV, ERR,
-				"IDC: Invalid State 0x%.04x.\n",
-				mbcp->mbox_out[0]);
+			netif_err(qdev, drv, qdev->ndev,
+				  "IDC: Invalid State 0x%.04x.\n",
+				  mbcp->mbox_out[0]);
 			status = -EIO;
 			break;
 		}
@@ -993,8 +986,8 @@ int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed to set LED Configuration.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed to set LED Configuration.\n");
 		status = -EIO;
 	}
 
@@ -1019,8 +1012,8 @@ int ql_mb_get_led_cfg(struct ql_adapter *qdev)
 		return status;
 
 	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed to get LED Configuration.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed to get LED Configuration.\n");
 		status = -EIO;
 	} else
 		qdev->led_config = mbcp->mbox_out[1];
@@ -1050,16 +1043,16 @@ int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
 		return status;
 
 	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Command not supported by firmware.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Command not supported by firmware.\n");
 		status = -EINVAL;
 	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
 		/* This indicates that the firmware is
 		 * already in the state we are trying to
 		 * change it to.
 		 */
-		QPRINTK(qdev, DRV, ERR,
-			"Command parameters make no change.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Command parameters make no change.\n");
 	}
 	return status;
 }
@@ -1089,12 +1082,12 @@ static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
 	}
 
 	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Command not supported by firmware.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Command not supported by firmware.\n");
 		status = -EINVAL;
 	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed to get MPI traffic control.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed to get MPI traffic control.\n");
 		status = -EIO;
 	}
 	return status;
@@ -1150,8 +1143,8 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 	status = ql_mb_get_port_cfg(qdev);
 	rtnl_unlock();
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Bug: Failed to get port config data.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Bug: Failed to get port config data.\n");
 		goto err;
 	}
 
@@ -1164,8 +1157,8 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 	qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE;
 	status = ql_set_port_cfg(qdev);
 	if (status) {
-		QPRINTK(qdev, DRV, ERR,
-			"Bug: Failed to set port config data.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Bug: Failed to set port config data.\n");
 		goto err;
 	}
 end:
@@ -1197,8 +1190,8 @@ void ql_mpi_idc_work(struct work_struct *work)
 
 	switch (aen) {
 	default:
-		QPRINTK(qdev, DRV, ERR,
-			"Bug: Unhandled IDC action.\n");
+		netif_err(qdev, drv, qdev->ndev,
+			  "Bug: Unhandled IDC action.\n");
 		break;
 	case MB_CMD_PORT_RESET:
 	case MB_CMD_STOP_FW:
@@ -1213,11 +1206,11 @@ void ql_mpi_idc_work(struct work_struct *work)
 		if (timeout) {
 			status = ql_mb_idc_ack(qdev);
 			if (status)
-				QPRINTK(qdev, DRV, ERR,
-					"Bug: No pending IDC!\n");
+				netif_err(qdev, drv, qdev->ndev,
+					  "Bug: No pending IDC!\n");
 		} else {
-			QPRINTK(qdev, DRV, DEBUG,
-				    "IDC ACK not required\n");
+			netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+				     "IDC ACK not required\n");
 			status = 0; /* success */
 		}
 		break;
@@ -1246,11 +1239,11 @@ void ql_mpi_idc_work(struct work_struct *work)
 		if (timeout) {
 			status = ql_mb_idc_ack(qdev);
 			if (status)
-				QPRINTK(qdev, DRV, ERR,
-				    "Bug: No pending IDC!\n");
+				netif_err(qdev, drv, qdev->ndev,
+					  "Bug: No pending IDC!\n");
 		} else {
-			QPRINTK(qdev, DRV, DEBUG,
-			    "IDC ACK not required\n");
+			netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+				     "IDC ACK not required\n");
 			status = 0; /* success */
 		}
 		break;
@@ -1298,12 +1291,12 @@ void ql_mpi_reset_work(struct work_struct *work)
 	 * then there is nothing to do.
 	 */
 	if (!ql_own_firmware(qdev)) {
-		QPRINTK(qdev, DRV, ERR, "Don't own firmware!\n");
+		netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n");
 		return;
 	}
 
 	if (!ql_core_dump(qdev, qdev->mpi_coredump)) {
-		QPRINTK(qdev, DRV, ERR, "Core is dumped!\n");
+		netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n");
 		qdev->core_is_dumped = 1;
 		queue_delayed_work(qdev->workqueue,
 			&qdev->mpi_core_to_log, 5 * HZ);
-- 
cgit v1.2.3


From d707204c1fd21ab49242aad17f92f949538e1507 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Feb 2010 11:49:53 +0000
Subject: drivers/net/skge.c: Use netif_printk macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/skge.c | 73 ++++++++++++++++++++++--------------------------------
 1 file changed, 29 insertions(+), 44 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 36ead52dea71..ffa55df4d607 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -1074,13 +1074,11 @@ static void skge_link_up(struct skge_port *skge)
 	netif_carrier_on(skge->netdev);
 	netif_wake_queue(skge->netdev);
 
-	if (netif_msg_link(skge)) {
-		printk(KERN_INFO PFX
-		       "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
-		       skge->netdev->name, skge->speed,
-		       skge->duplex == DUPLEX_FULL ? "full" : "half",
-		       skge_pause(skge->flow_status));
-	}
+	netif_info(skge, link, skge->netdev,
+		   "Link is up at %d Mbps, %s duplex, flow control %s\n",
+		   skge->speed,
+		   skge->duplex == DUPLEX_FULL ? "full" : "half",
+		   skge_pause(skge->flow_status));
 }
 
 static void skge_link_down(struct skge_port *skge)
@@ -1089,8 +1087,7 @@ static void skge_link_down(struct skge_port *skge)
 	netif_carrier_off(skge->netdev);
 	netif_stop_queue(skge->netdev);
 
-	if (netif_msg_link(skge))
-		printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name);
+	netif_info(skge, link, skge->netdev, "Link is down\n");
 }
 
 
@@ -1792,9 +1789,8 @@ static void genesis_mac_intr(struct skge_hw *hw, int port)
 	struct skge_port *skge = netdev_priv(dev);
 	u16 status = xm_read16(hw, port, XM_ISRC);
 
-	if (netif_msg_intr(skge))
-		printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n",
-		       dev->name, status);
+	netif_printk(skge, intr, KERN_DEBUG, skge->netdev,
+		     "mac interrupt status 0x%x\n", status);
 
 	if (hw->phy_type == SK_PHY_XMAC && (status & XM_IS_INP_ASS)) {
   		xm_link_down(hw, port);
@@ -1898,9 +1894,8 @@ static inline void bcom_phy_intr(struct skge_port *skge)
 	u16 isrc;
 
 	isrc = xm_phy_read(hw, port, PHY_BCOM_INT_STAT);
-	if (netif_msg_intr(skge))
-		printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x\n",
-		       skge->netdev->name, isrc);
+	netif_printk(skge, intr, KERN_DEBUG, skge->netdev,
+		     "phy interrupt status 0x%x\n", isrc);
 
 	if (isrc & PHY_B_IS_PSE)
 		printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n",
@@ -2298,9 +2293,8 @@ static void yukon_mac_intr(struct skge_hw *hw, int port)
 	struct skge_port *skge = netdev_priv(dev);
 	u8 status = skge_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
 
-	if (netif_msg_intr(skge))
-		printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n",
-		       dev->name, status);
+	netif_printk(skge, intr, KERN_DEBUG, skge->netdev,
+		     "mac interrupt status 0x%x\n", status);
 
 	if (status & GM_IS_RX_FF_OR) {
 		++dev->stats.rx_fifo_errors;
@@ -2379,9 +2373,8 @@ static void yukon_phy_intr(struct skge_port *skge)
 	istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
 	phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
 
-	if (netif_msg_intr(skge))
-		printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x 0x%x\n",
-		       skge->netdev->name, istatus, phystat);
+	netif_printk(skge, intr, KERN_DEBUG, skge->netdev,
+		     "phy interrupt status 0x%x 0x%x\n", istatus, phystat);
 
 	if (istatus & PHY_M_IS_AN_COMPL) {
 		if (gm_phy_read(hw, port, PHY_MARV_AUNE_LP)
@@ -2571,8 +2564,7 @@ static int skge_up(struct net_device *dev)
 	if (!is_valid_ether_addr(dev->dev_addr))
 		return -EINVAL;
 
-	if (netif_msg_ifup(skge))
-		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+	netif_info(skge, ifup, skge->netdev, "enabling interface\n");
 
 	if (dev->mtu > RX_BUF_SIZE)
 		skge->rx_buf_size = dev->mtu + ETH_HLEN;
@@ -2670,8 +2662,7 @@ static int skge_down(struct net_device *dev)
 	if (skge->mem == NULL)
 		return 0;
 
-	if (netif_msg_ifdown(skge))
-		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+	netif_info(skge, ifdown, skge->netdev, "disabling interface\n");
 
 	netif_tx_disable(dev);
 
@@ -2825,9 +2816,9 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
 
 	skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_START);
 
-	if (unlikely(netif_msg_tx_queued(skge)))
-		printk(KERN_DEBUG "%s: tx queued, slot %td, len %d\n",
-		       dev->name, e - skge->tx_ring.start, skb->len);
+	netif_printk(skge, tx_queued, KERN_DEBUG, skge->netdev,
+		     "tx queued, slot %td, len %d\n",
+		     e - skge->tx_ring.start, skb->len);
 
 	skge->tx_ring.to_use = e->next;
 	smp_wmb();
@@ -2858,9 +2849,8 @@ static void skge_tx_free(struct skge_port *skge, struct skge_element *e,
 			       PCI_DMA_TODEVICE);
 
 	if (control & BMU_EOF) {
-		if (unlikely(netif_msg_tx_done(skge)))
-			printk(KERN_DEBUG PFX "%s: tx done slot %td\n",
-			       skge->netdev->name, e - skge->tx_ring.start);
+		netif_printk(skge, tx_done, KERN_DEBUG, skge->netdev,
+			     "tx done slot %td\n", e - skge->tx_ring.start);
 
 		dev_kfree_skb(e->skb);
 	}
@@ -2885,8 +2875,7 @@ static void skge_tx_timeout(struct net_device *dev)
 {
 	struct skge_port *skge = netdev_priv(dev);
 
-	if (netif_msg_timer(skge))
-		printk(KERN_DEBUG PFX "%s: tx timeout\n", dev->name);
+	netif_printk(skge, timer, KERN_DEBUG, skge->netdev, "tx timeout\n");
 
 	skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP);
 	skge_tx_clean(dev);
@@ -3054,10 +3043,9 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
 	struct sk_buff *skb;
 	u16 len = control & BMU_BBC;
 
-	if (unlikely(netif_msg_rx_status(skge)))
-		printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
-		       dev->name, e - skge->rx_ring.start,
-		       status, len);
+	netif_printk(skge, rx_status, KERN_DEBUG, skge->netdev,
+		     "rx slot %td status 0x%x len %d\n",
+		     e - skge->rx_ring.start, status, len);
 
 	if (len > skge->rx_buf_size)
 		goto error;
@@ -3111,10 +3099,9 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
 	return skb;
 error:
 
-	if (netif_msg_rx_err(skge))
-		printk(KERN_DEBUG PFX "%s: rx err, slot %td control 0x%x status 0x%x\n",
-		       dev->name, e - skge->rx_ring.start,
-		       control, status);
+	netif_printk(skge, rx_err, KERN_DEBUG, skge->netdev,
+		     "rx err, slot %td control 0x%x status 0x%x\n",
+		     e - skge->rx_ring.start, control, status);
 
 	if (skge->hw->chip_id == CHIP_ID_GENESIS) {
 		if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
@@ -3885,9 +3872,7 @@ static void __devinit skge_show_addr(struct net_device *dev)
 {
 	const struct skge_port *skge = netdev_priv(dev);
 
-	if (netif_msg_probe(skge))
-		printk(KERN_INFO PFX "%s: addr %pM\n",
-		       dev->name, dev->dev_addr);
+	netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr);
 }
 
 static int __devinit skge_probe(struct pci_dev *pdev,
-- 
cgit v1.2.3


From 8b05543129a5f216e08625e947a16b844bc4766d Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 12 Feb 2010 06:57:58 +0000
Subject: sky2: fix sparse warning

Warning about hidden variable

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 45299d663498..92f7ba0953ee 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3128,7 +3128,7 @@ static void sky2_reset(struct sky2_hw *hw)
 		/* check if PSMv2 was running before */
 		reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
 		if (reg & PCI_EXP_LNKCTL_ASPMC) {
-			int cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+			cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 			/* restore the PCIe Link Control register */
 			sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
 		}
-- 
cgit v1.2.3


From 5f8ae5c537d937bab9cfeb83a30a9b670c3cfb35 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 12 Feb 2010 06:57:59 +0000
Subject: sky2: WoL changes

Change Wake On Lan code to be similar to vendor driver. The definition
of Y2_HW_WOL_ON is confusing; what it means is transition to firmware SPI
setting when doing power change.

Since same code is done for both shutdown and suspend, use common
code path.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 65 ++++++++----------------------------------------------
 1 file changed, 9 insertions(+), 56 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 92f7ba0953ee..edf37aaf67f8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -251,6 +251,8 @@ static void sky2_power_on(struct sky2_hw *hw)
 
 		sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
 
+		sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
+
 		/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
 		reg = sky2_read32(hw, B2_GP_IO);
 		reg |= GLB_GPIO_STAT_RACE_DIS;
@@ -782,6 +784,9 @@ static void sky2_wol_init(struct sky2_port *sky2)
 	ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
 	sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
 
+	/* Disable PiG firmware */
+	sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
+
 	/* Turn on legacy PCI-Express PME mode */
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 |= PCI_Y2_PME_LEGACY;
@@ -789,7 +794,6 @@ static void sky2_wol_init(struct sky2_port *sky2)
 
 	/* block receiver */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
-
 }
 
 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
@@ -3272,27 +3276,6 @@ static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
 	return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
 }
 
-static void sky2_hw_set_wol(struct sky2_hw *hw)
-{
-	int wol = 0;
-	int i;
-
-	for (i = 0; i < hw->ports; i++) {
-		struct net_device *dev = hw->dev[i];
-		struct sky2_port *sky2 = netdev_priv(dev);
-
-		if (sky2->wol)
-			wol = 1;
-	}
-
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
-	    hw->chip_id == CHIP_ID_YUKON_EX ||
-	    hw->chip_id == CHIP_ID_YUKON_FE_P)
-		sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
-
-	device_set_wakeup_enable(&hw->pdev->dev, wol);
-}
-
 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	const struct sky2_port *sky2 = netdev_priv(dev);
@@ -3311,11 +3294,6 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 		return -EOPNOTSUPP;
 
 	sky2->wol = wol->wolopts;
-
-	sky2_hw_set_wol(hw);
-
-	if (!netif_running(dev))
-		sky2_wol_init(sky2);
 	return 0;
 }
 
@@ -4809,7 +4787,6 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
-#ifdef CONFIG_PM
 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
@@ -4834,6 +4811,8 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 		wol |= sky2->wol;
 	}
 
+	device_set_wakeup_enable(&pdev->dev, wol != 0);
+
 	sky2_write32(hw, B0_IMSK, 0);
 	napi_disable(&hw->napi);
 	sky2_power_aux(hw);
@@ -4846,6 +4825,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int sky2_resume(struct pci_dev *pdev)
 {
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
@@ -4895,34 +4875,7 @@ out:
 
 static void sky2_shutdown(struct pci_dev *pdev)
 {
-	struct sky2_hw *hw = pci_get_drvdata(pdev);
-	int i, wol = 0;
-
-	if (!hw)
-		return;
-
-	rtnl_lock();
-	del_timer_sync(&hw->watchdog_timer);
-
-	for (i = 0; i < hw->ports; i++) {
-		struct net_device *dev = hw->dev[i];
-		struct sky2_port *sky2 = netdev_priv(dev);
-
-		if (sky2->wol) {
-			wol = 1;
-			sky2_wol_init(sky2);
-		}
-	}
-
-	if (wol)
-		sky2_power_aux(hw);
-	rtnl_unlock();
-
-	pci_enable_wake(pdev, PCI_D3hot, wol);
-	pci_enable_wake(pdev, PCI_D3cold, wol);
-
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
+	sky2_suspend(pdev, PMSG_SUSPEND);
 }
 
 static struct pci_driver sky2_driver = {
-- 
cgit v1.2.3


From 87b09f1f25cd1e01d7c50bf423c7fe33027d7511 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 12 Feb 2010 06:58:00 +0000
Subject: sky2: dont enable PME legacy mode

This bit is not changed by vendor driver, and should be left alone.
The documentation implies this a debug bit.
  0 = WAKE# only asserted when VMAIN not available
  1 = WAKE# is depend on wake events and independent of VMAIN.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index edf37aaf67f8..249484220a5f 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -733,7 +733,6 @@ static void sky2_wol_init(struct sky2_port *sky2)
 	unsigned port = sky2->port;
 	enum flow_control save_mode;
 	u16 ctrl;
-	u32 reg1;
 
 	/* Bring hardware out of reset */
 	sky2_write16(hw, B0_CTST, CS_RST_CLR);
@@ -787,11 +786,6 @@ static void sky2_wol_init(struct sky2_port *sky2)
 	/* Disable PiG firmware */
 	sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
 
-	/* Turn on legacy PCI-Express PME mode */
-	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-	reg1 |= PCI_Y2_PME_LEGACY;
-	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-
 	/* block receiver */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 }
-- 
cgit v1.2.3


From 44dde56d37787cbad2e867a41fe87d6b0aa37fc8 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 12 Feb 2010 06:58:01 +0000
Subject: sky2: jumbo packet changes

Change how FIFO is programmed in jumbo mode (to match vendor driver).
Mostly cosmetic, the only register change is that the bits 22,23
are not programemd used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 36 ++++++++++++++----------------------
 drivers/net/sky2.h |  8 ++++----
 2 files changed, 18 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 249484220a5f..8a87e16e732f 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -798,29 +798,15 @@ static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
 	      hw->chip_rev != CHIP_REV_YU_EX_A0) ||
 	     hw->chip_id >= CHIP_ID_YUKON_FE_P) {
 		/* Yukon-Extreme B0 and further Extreme devices */
-		/* enable Store & Forward mode for TX */
+		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
+	} else if (dev->mtu > ETH_DATA_LEN) {
+		/* set Tx GMAC FIFO Almost Empty Threshold */
+		sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
+			     (ECU_JUMBO_WM << 16) | ECU_AE_THR);
 
-		if (dev->mtu <= ETH_DATA_LEN)
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-				     TX_JUMBO_DIS | TX_STFW_ENA);
-
-		else
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-				     TX_JUMBO_ENA| TX_STFW_ENA);
-	} else {
-		if (dev->mtu <= ETH_DATA_LEN)
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
-		else {
-			/* set Tx GMAC FIFO Almost Empty Threshold */
-			sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
-				     (ECU_JUMBO_WM << 16) | ECU_AE_THR);
-
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
-
-			/* Can't do offload because of lack of store/forward */
-			dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
-		}
-	}
+		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
+	} else
+		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
 }
 
 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
@@ -2206,14 +2192,20 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 	u16 ctl, mode;
 	u32 imask;
 
+	/* MTU size outside the spec */
 	if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
 		return -EINVAL;
 
+	/* MTU > 1500 on yukon FE and FE+ not allowed */
 	if (new_mtu > ETH_DATA_LEN &&
 	    (hw->chip_id == CHIP_ID_YUKON_FE ||
 	     hw->chip_id == CHIP_ID_YUKON_FE_P))
 		return -EINVAL;
 
+	/* TSO, etc on Yukon Ultra and MTU > 1500 not supported */
+	if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
+		dev->features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
+
 	if (!netif_running(dev)) {
 		dev->mtu = new_mtu;
 		return 0;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 54cb303443e0..a5e182dd9819 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1895,14 +1895,14 @@ enum {
 
 /*	TX_GMF_CTRL_T	32 bit	Tx GMAC FIFO Control/Test */
 enum {
-	TX_STFW_DIS	= 1<<31,/* Disable Store & Forward (Yukon-EC Ultra) */
-	TX_STFW_ENA	= 1<<30,/* Enable  Store & Forward (Yukon-EC Ultra) */
+	TX_STFW_DIS	= 1<<31,/* Disable Store & Forward */
+	TX_STFW_ENA	= 1<<30,/* Enable  Store & Forward */
 
 	TX_VLAN_TAG_ON	= 1<<25,/* enable  VLAN tagging */
 	TX_VLAN_TAG_OFF	= 1<<24,/* disable VLAN tagging */
 
-	TX_JUMBO_ENA	= 1<<23,/* PCI Jumbo Mode enable (Yukon-EC Ultra) */
-	TX_JUMBO_DIS	= 1<<22,/* PCI Jumbo Mode enable (Yukon-EC Ultra) */
+	TX_PCI_JUM_ENA  = 1<<23,/* PCI Jumbo Mode enable */
+	TX_PCI_JUM_DIS  = 1<<22,/* PCI Jumbo Mode enable */
 
 	GMF_WSP_TST_ON	= 1<<18,/* Write Shadow Pointer Test On */
 	GMF_WSP_TST_OFF	= 1<<17,/* Write Shadow Pointer Test Off */
-- 
cgit v1.2.3


From 39ef110ba859f44efeb9a88d0e85316cd1bbecda Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Fri, 12 Feb 2010 06:58:02 +0000
Subject: sky2: Factor out code to calculate packet sizes

Move code to calculate receive threshold and packet size out of
sky2_rx_start() so that is can be called from elsewhere easily.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 57 +++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 8a87e16e732f..c5de65c6f6e1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1049,6 +1049,40 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
 	return le;
 }
 
+static unsigned sky2_get_rx_threshold(struct sky2_port* sky2)
+{
+	unsigned size;
+
+	/* Space needed for frame data + headers rounded up */
+	size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
+
+	/* Stopping point for hardware truncation */
+	return (size - 8) / sizeof(u32);
+}
+
+static unsigned sky2_get_rx_data_size(struct sky2_port* sky2)
+{
+	struct rx_ring_info *re;
+	unsigned size;
+
+	/* Space needed for frame data + headers rounded up */
+	size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
+
+	sky2->rx_nfrags = size >> PAGE_SHIFT;
+	BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
+
+	/* Compute residue after pages */
+	size -= sky2->rx_nfrags << PAGE_SHIFT;
+
+	/* Optimize to handle small packets and headers */
+	if (size < copybreak)
+		size = copybreak;
+	if (size < ETH_HLEN)
+		size = ETH_HLEN;
+
+	return size;
+}
+
 /* Build description to hardware for one receive segment */
 static void sky2_rx_add(struct sky2_port *sky2,  u8 op,
 			dma_addr_t map, unsigned len)
@@ -1343,7 +1377,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	struct sky2_hw *hw = sky2->hw;
 	struct rx_ring_info *re;
 	unsigned rxq = rxqaddr[sky2->port];
-	unsigned i, size, thresh;
+	unsigned i, thresh;
 
 	sky2->rx_put = sky2->rx_next = 0;
 	sky2_qset(hw, rxq);
@@ -1364,25 +1398,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	if (!(hw->flags & SKY2_HW_NEW_LE))
 		rx_set_checksum(sky2);
 
-	/* Space needed for frame data + headers rounded up */
-	size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
-
-	/* Stopping point for hardware truncation */
-	thresh = (size - 8) / sizeof(u32);
-
-	sky2->rx_nfrags = size >> PAGE_SHIFT;
-	BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
-
-	/* Compute residue after pages */
-	size -= sky2->rx_nfrags << PAGE_SHIFT;
-
-	/* Optimize to handle small packets and headers */
-	if (size < copybreak)
-		size = copybreak;
-	if (size < ETH_HLEN)
-		size = ETH_HLEN;
-
-	sky2->rx_data_size = size;
+	sky2->rx_data_size = sky2_get_rx_data_size(sky2);
 
 	/* Fill Rx ring */
 	for (i = 0; i < sky2->rx_pending; i++) {
@@ -1407,6 +1423,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	 * the register is limited to 9 bits, so if you do frames > 2052
 	 * you better get the MTU right!
 	 */
+	thresh = sky2_get_rx_threshold(sky2);
 	if (thresh > 0x1ff)
 		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
 	else {
-- 
cgit v1.2.3


From 200ac492b3c366346fcabd11897fadbd1a7a6599 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Fri, 12 Feb 2010 06:58:03 +0000
Subject: sky2: Allocate initial skbs in sky2_alloc_buffers

Allocate everything in one place so there's a single point
of failure in sky2_up, and sky2_rx_start can no longer fail.

Don't leave the hardware in a partially initialized state in the
case rx ring allocation fails.

As with the old code, the rx ring still needs to be fully
allocated for sky2_up to succeed.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 66 +++++++++++++++++++++++++++++-------------------------
 1 file changed, 36 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c5de65c6f6e1..493a82018cbd 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1363,8 +1363,32 @@ static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
 	sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
 }
 
+static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
+{
+	struct sky2_hw *hw = sky2->hw;
+	unsigned i;
+
+	sky2->rx_data_size = sky2_get_rx_data_size(sky2);
+
+	/* Fill Rx ring */
+	for (i = 0; i < sky2->rx_pending; i++) {
+		struct rx_ring_info *re = sky2->rx_ring + i;
+
+		re->skb = sky2_rx_alloc(sky2);
+		if (!re->skb)
+			return -ENOMEM;
+
+		if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
+			dev_kfree_skb(re->skb);
+			re->skb = NULL;
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
 /*
- * Allocate and setup receiver buffer pool.
+ * Setup receiver buffer pool.
  * Normal case this ends up creating one list element for skb
  * in the receive ring. Worst case if using large MTU and each
  * allocation falls on a different 64 bit region, that results
@@ -1372,7 +1396,7 @@ static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
  * One element is used for checksum enable/disable, and one
  * extra to avoid wrap.
  */
-static int sky2_rx_start(struct sky2_port *sky2)
+static void sky2_rx_start(struct sky2_port *sky2)
 {
 	struct sky2_hw *hw = sky2->hw;
 	struct rx_ring_info *re;
@@ -1398,22 +1422,9 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	if (!(hw->flags & SKY2_HW_NEW_LE))
 		rx_set_checksum(sky2);
 
-	sky2->rx_data_size = sky2_get_rx_data_size(sky2);
-
-	/* Fill Rx ring */
+	/* submit Rx ring */
 	for (i = 0; i < sky2->rx_pending; i++) {
 		re = sky2->rx_ring + i;
-
-		re->skb = sky2_rx_alloc(sky2);
-		if (!re->skb)
-			goto nomem;
-
-		if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
-			dev_kfree_skb(re->skb);
-			re->skb = NULL;
-			goto nomem;
-		}
-
 		sky2_rx_submit(sky2, re);
 	}
 
@@ -1455,13 +1466,6 @@ static int sky2_rx_start(struct sky2_port *sky2)
 		sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
 			     TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
 	}
-
-
-
-	return 0;
-nomem:
-	sky2_rx_clean(sky2);
-	return -ENOMEM;
 }
 
 static int sky2_alloc_buffers(struct sky2_port *sky2)
@@ -1492,7 +1496,7 @@ static int sky2_alloc_buffers(struct sky2_port *sky2)
 	if (!sky2->rx_ring)
 		goto nomem;
 
-	return 0;
+	return sky2_alloc_rx_skbs(sky2);
 nomem:
 	return -ENOMEM;
 }
@@ -1501,6 +1505,8 @@ static void sky2_free_buffers(struct sky2_port *sky2)
 {
 	struct sky2_hw *hw = sky2->hw;
 
+	sky2_rx_clean(sky2);
+
 	if (sky2->rx_le) {
 		pci_free_consistent(hw->pdev, RX_LE_BYTES,
 				    sky2->rx_le, sky2->rx_le_map);
@@ -1590,9 +1596,7 @@ static int sky2_up(struct net_device *dev)
 	sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
 #endif
 
-	err = sky2_rx_start(sky2);
-	if (err)
-		goto err_out;
+	sky2_rx_start(sky2);
 
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
@@ -1960,8 +1964,6 @@ static int sky2_down(struct net_device *dev)
 	/* Free any pending frames stuck in HW queue */
 	sky2_tx_complete(sky2, sky2->tx_prod);
 
-	sky2_rx_clean(sky2);
-
 	sky2_free_buffers(sky2);
 
 	return 0;
@@ -2257,7 +2259,11 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 
 	sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
 
-	err = sky2_rx_start(sky2);
+	err = sky2_alloc_rx_skbs(sky2);
+	if (!err)
+		sky2_rx_start(sky2);
+	else
+		sky2_rx_clean(sky2);
 	sky2_write32(hw, B0_IMSK, imask);
 
 	sky2_read32(hw, B0_Y2_SP_LISR);
-- 
cgit v1.2.3


From ea0f71e59c20ea1e413cacfc971e051b3d6c6f64 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Fri, 12 Feb 2010 06:58:04 +0000
Subject: sky2: Refactor sky2_up into two functions

Move hardware initialization into sky2_hw_up.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 41 +++++++++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 493a82018cbd..1f0180f1f0c3 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1525,16 +1525,16 @@ static void sky2_free_buffers(struct sky2_port *sky2)
 	sky2->rx_ring = NULL;
 }
 
-/* Bring up network interface. */
-static int sky2_up(struct net_device *dev)
+static void sky2_hw_up(struct sky2_port *sky2)
 {
-	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	u32 imask, ramsize;
-	int cap, err;
+	u32 ramsize;
+	int cap;
 	struct net_device *otherdev = hw->dev[sky2->port^1];
 
+	tx_init(sky2);
+
 	/*
  	 * On dual port PCI-X card, there is an problem where status
 	 * can be received out of order due to split transactions
@@ -1546,16 +1546,7 @@ static int sky2_up(struct net_device *dev)
 		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
  		cmd &= ~PCI_X_CMD_MAX_SPLIT;
  		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
-
- 	}
-
-	netif_carrier_off(dev);
-
-	err = sky2_alloc_buffers(sky2);
-	if (err)
-		goto err_out;
-
-	tx_init(sky2);
+	}
 
 	sky2_mac_init(hw, port);
 
@@ -1564,7 +1555,7 @@ static int sky2_up(struct net_device *dev)
 	if (ramsize > 0) {
 		u32 rxspace;
 
-		pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
+		pr_debug(PFX "%s: ram buffer %dK\n", sky2->netdev->name, ramsize);
 		if (ramsize < 16)
 			rxspace = ramsize / 2;
 		else
@@ -1597,6 +1588,24 @@ static int sky2_up(struct net_device *dev)
 #endif
 
 	sky2_rx_start(sky2);
+}
+
+/* Bring up network interface. */
+static int sky2_up(struct net_device *dev)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	u32 imask;
+	int err;
+
+	netif_carrier_off(dev);
+
+	err = sky2_alloc_buffers(sky2);
+	if (err)
+		goto err_out;
+
+	sky2_hw_up(sky2);
 
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
-- 
cgit v1.2.3


From f2b31cb3ae491f9e82443cf25cc5a9ebdbc63619 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Fri, 12 Feb 2010 06:58:05 +0000
Subject: sky2: Refactor sky2_down into two functions

Create a sky2_hw_down that brings the hardware down.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminber <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1f0180f1f0c3..61a0451957b0 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1908,21 +1908,12 @@ static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 }
 
-/* Network shutdown */
-static int sky2_down(struct net_device *dev)
+static void sky2_hw_down(struct sky2_port *sky2)
 {
-	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	u16 ctrl;
 	u32 imask;
-
-	/* Never really got started! */
-	if (!sky2->tx_le)
-		return 0;
-
-	if (netif_msg_ifdown(sky2))
-		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+	u16 ctrl;
 
 	/* Force flow control off */
 	sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -1972,6 +1963,21 @@ static int sky2_down(struct net_device *dev)
 
 	/* Free any pending frames stuck in HW queue */
 	sky2_tx_complete(sky2, sky2->tx_prod);
+}
+
+/* Network shutdown */
+static int sky2_down(struct net_device *dev)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+
+	/* Never really got started! */
+	if (!sky2->tx_le)
+		return 0;
+
+	if (netif_msg_ifdown(sky2))
+		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+
+	sky2_hw_down(sky2);
 
 	sky2_free_buffers(sky2);
 
-- 
cgit v1.2.3


From 8a0c9228f110218f443d9ef8f9ab629251959733 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Fri, 12 Feb 2010 06:58:06 +0000
Subject: sky2: Avoid down and up during sky2_reset

Rewrite sky2_reset to work with interrupts disabled and
 avoid freeing and reallocing memory.

The old code used sky2_down and sky2_up to implement sky2_reset,
 which meant interrupts could not be disabled, and the transmit and
 receive ring buffers would be free'd and reallocated.

To avoid the interrupt handler waking the transmit queue while
 we're doing a reset, it's better to have interrupts and NAPI
 polls disabled.

Note: Modified Mike's patch to do IRQ disable in sky2_down before
 calling sky2_hw_down - Stephen

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 68 +++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 61a0451957b0..4147530cee02 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1880,10 +1880,6 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 
 	sky2->tx_cons = idx;
 	smp_mb();
-
-	/* Wake unless it's detached, and called e.g. from sky2_down() */
-	if (tx_avail(sky2) > MAX_SKB_TX_LE + 4 && netif_device_present(dev))
-		netif_wake_queue(dev);
 }
 
 static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
@@ -1912,7 +1908,6 @@ static void sky2_hw_down(struct sky2_port *sky2)
 {
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	u32 imask;
 	u16 ctrl;
 
 	/* Force flow control off */
@@ -1946,15 +1941,6 @@ static void sky2_hw_down(struct sky2_port *sky2)
 
 	sky2_rx_stop(sky2);
 
-	/* Disable port IRQ */
-	imask = sky2_read32(hw, B0_IMSK);
-	imask &= ~portirq_msk[port];
-	sky2_write32(hw, B0_IMSK, imask);
-	sky2_read32(hw, B0_IMSK);
-
-	synchronize_irq(hw->pdev->irq);
-	napi_synchronize(&hw->napi);
-
 	spin_lock_bh(&sky2->phy_lock);
 	sky2_phy_power_down(hw, port);
 	spin_unlock_bh(&sky2->phy_lock);
@@ -1969,6 +1955,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
 static int sky2_down(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
+	struct sky2_hw *hw = sky2->hw;
 
 	/* Never really got started! */
 	if (!sky2->tx_le)
@@ -1977,6 +1964,14 @@ static int sky2_down(struct net_device *dev)
 	if (netif_msg_ifdown(sky2))
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
+	/* Disable port IRQ */
+	sky2_write32(hw, B0_IMSK,
+		     sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
+	sky2_read32(hw, B0_IMSK);
+
+	synchronize_irq(hw->pdev->irq);
+	napi_synchronize(&hw->napi);
+
 	sky2_hw_down(sky2);
 
 	sky2_free_buffers(sky2);
@@ -2475,8 +2470,13 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 
-	if (netif_running(dev))
+	if (netif_running(dev)) {
 		sky2_tx_complete(sky2, last);
+
+		/* Wake unless it's detached, and called e.g. from sky2_down() */
+		if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
+			netif_wake_queue(dev);
+	}
 }
 
 static inline void sky2_skb_rx(const struct sky2_port *sky2,
@@ -3277,20 +3277,46 @@ static int sky2_reattach(struct net_device *dev)
 static void sky2_restart(struct work_struct *work)
 {
 	struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
+	u32 imask;
 	int i;
 
 	rtnl_lock();
-	for (i = 0; i < hw->ports; i++)
-		sky2_detach(hw->dev[i]);
 
 	napi_disable(&hw->napi);
+	synchronize_irq(hw->pdev->irq);
+	imask = sky2_read32(hw, B0_IMSK);
 	sky2_write32(hw, B0_IMSK, 0);
+
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		if (!netif_running(dev))
+			continue;
+
+		netif_carrier_off(dev);
+		netif_tx_disable(dev);
+		sky2_hw_down(sky2);
+	}
+
 	sky2_reset(hw);
-	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
-	napi_enable(&hw->napi);
 
-	for (i = 0; i < hw->ports; i++)
-		sky2_reattach(hw->dev[i]);
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		if (!netif_running(dev))
+			continue;
+
+		sky2_hw_up(sky2);
+		netif_wake_queue(dev);
+	}
+
+	sky2_write32(hw, B0_IMSK, imask);
+	sky2_read32(hw, B0_IMSK);
+
+	sky2_read32(hw, B0_Y2_SP_LISR);
+	napi_enable(&hw->napi);
 
 	rtnl_unlock();
 }
-- 
cgit v1.2.3


From cfc0861ba32643c63901832a583054bea0445961 Mon Sep 17 00:00:00 2001
From: stephen hemminger <shemminger@vyatta.com>
Date: Fri, 12 Feb 2010 06:58:07 +0000
Subject: sky2: version 1.27

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 4147530cee02..dfff8e56a51e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.26"
+#define DRV_VERSION		"1.27"
 #define PFX			DRV_NAME " "
 
 /*
-- 
cgit v1.2.3


From 8151d2948e088c20b7d29c793cf1fd744b6a2699 Mon Sep 17 00:00:00 2001
From: "Williams, Mitch A" <mitch.a.williams@intel.com>
Date: Wed, 10 Feb 2010 01:44:24 +0000
Subject: igb: support for VF configuration tools

Add support to the igb driver for VF configuration mechanisms through the
PF interface.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/e1000_82575.h |   3 +
 drivers/net/igb/e1000_regs.h  |   1 +
 drivers/net/igb/igb.h         |   3 +
 drivers/net/igb/igb_main.c    | 130 ++++++++++++++++++++++++++++++++++++++----
 4 files changed, 126 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index d51c9927c819..bb53083ec61f 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -219,6 +219,9 @@ struct e1000_adv_tx_context_desc {
 #define E1000_VLVF_LVLAN          0x00100000
 #define E1000_VLVF_VLANID_ENABLE  0x80000000
 
+#define E1000_VMVIR_VLANA_DEFAULT      0x40000000 /* Always use default VLAN */
+#define E1000_VMVIR_VLANA_NEVER        0x80000000 /* Never insert VLAN tag */
+
 #define E1000_IOVCTL 0x05BBC
 #define E1000_IOVCTL_REUSE_VFQ 0x00000001
 
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index dd4e6ffd29f5..abb7333a1fbf 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -310,6 +310,7 @@
 #define E1000_VMOLR(_n)        (0x05AD0 + (4 * (_n)))
 #define E1000_VLVF(_n)         (0x05D00 + (4 * (_n))) /* VLAN Virtual Machine
                                                        * Filter - RW */
+#define E1000_VMVIR(_n)        (0x03700 + (4 * (_n)))
 
 #define wr32(reg, value) (writel(value, hw->hw_addr + reg))
 #define rd32(reg) (readl(hw->hw_addr + reg))
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index b1c1eb88893f..83ea11701f45 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -75,11 +75,14 @@ struct vf_data_storage {
 	u16 vlans_enabled;
 	u32 flags;
 	unsigned long last_nack;
+	u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+	u16 pf_qos;
 };
 
 #define IGB_VF_FLAG_CTS            0x00000001 /* VF is clear to send data */
 #define IGB_VF_FLAG_UNI_PROMISC    0x00000002 /* VF has unicast promisc */
 #define IGB_VF_FLAG_MULTI_PROMISC  0x00000004 /* VF has multicast promisc */
+#define IGB_VF_FLAG_PF_SET_MAC     0x00000008 /* PF has set MAC address */
 
 /* RX descriptor control thresholds.
  * PTHRESH - MAC will consider prefetch if it has fewer than this number of
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 28371d648208..4fe7b0ba6310 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -133,6 +133,12 @@ static void igb_msg_task(struct igb_adapter *);
 static void igb_vmm_control(struct igb_adapter *);
 static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+			       int vf, u16 vlan, u8 qos);
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
+				 struct ifla_vf_info *ivi);
 
 #ifdef CONFIG_PM
 static int igb_suspend(struct pci_dev *, pm_message_t);
@@ -1352,6 +1358,10 @@ static const struct net_device_ops igb_netdev_ops = {
 	.ndo_vlan_rx_register	= igb_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= igb_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= igb_vlan_rx_kill_vid,
+	.ndo_set_vf_mac		= igb_ndo_set_vf_mac,
+	.ndo_set_vf_vlan	= igb_ndo_set_vf_vlan,
+	.ndo_set_vf_tx_rate	= igb_ndo_set_vf_bw,
+	.ndo_get_vf_config	= igb_ndo_get_vf_config,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= igb_netpoll,
 #endif
@@ -2479,7 +2489,8 @@ static void igb_rlpml_set(struct igb_adapter *adapter)
 	wr32(E1000_RLPML, max_frame_size);
 }
 
-static inline void igb_set_vmolr(struct igb_adapter *adapter, int vfn)
+static inline void igb_set_vmolr(struct igb_adapter *adapter,
+				 int vfn, bool aupe)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 vmolr;
@@ -2492,8 +2503,11 @@ static inline void igb_set_vmolr(struct igb_adapter *adapter, int vfn)
 		return;
 
 	vmolr = rd32(E1000_VMOLR(vfn));
-	vmolr |= E1000_VMOLR_AUPE |        /* Accept untagged packets */
-	         E1000_VMOLR_STRVLAN;      /* Strip vlan tags */
+	vmolr |= E1000_VMOLR_STRVLAN;      /* Strip vlan tags */
+	if (aupe)
+		vmolr |= E1000_VMOLR_AUPE;        /* Accept untagged packets */
+	else
+		vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
 
 	/* clear all bits that might not be set */
 	vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
@@ -2564,7 +2578,7 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
 	wr32(E1000_SRRCTL(reg_idx), srrctl);
 
 	/* set filtering for VMDQ pools */
-	igb_set_vmolr(adapter, reg_idx & 0x7);
+	igb_set_vmolr(adapter, reg_idx & 0x7, true);
 
 	/* enable receive descriptor fetching */
 	rxdctl = rd32(E1000_RXDCTL(reg_idx));
@@ -4490,10 +4504,57 @@ static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
 				reg |= size;
 				wr32(E1000_VMOLR(vf), reg);
 			}
-			return 0;
 		}
 	}
-	return -1;
+	return 0;
+}
+
+static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (vid)
+		wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
+	else
+		wr32(E1000_VMVIR(vf), 0);
+}
+
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+			       int vf, u16 vlan, u8 qos)
+{
+	int err = 0;
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
+		return -EINVAL;
+	if (vlan || qos) {
+		err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+		if (err)
+			goto out;
+		igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+		igb_set_vmolr(adapter, vf, !vlan);
+		adapter->vf_data[vf].pf_vlan = vlan;
+		adapter->vf_data[vf].pf_qos = qos;
+		dev_info(&adapter->pdev->dev,
+			 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+		if (test_bit(__IGB_DOWN, &adapter->state)) {
+			dev_warn(&adapter->pdev->dev,
+				 "The VF VLAN has been set,"
+				 " but the PF device is not up.\n");
+			dev_warn(&adapter->pdev->dev,
+				 "Bring the PF device up before"
+				 " attempting to use the VF device.\n");
+		}
+	} else {
+		igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
+				   false, vf);
+		igb_set_vmvir(adapter, vlan, vf);
+		igb_set_vmolr(adapter, vf, true);
+		adapter->vf_data[vf].pf_vlan = 0;
+		adapter->vf_data[vf].pf_qos = 0;
+       }
+out:
+       return err;
 }
 
 static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
@@ -4506,15 +4567,21 @@ static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
 
 static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
 {
-	/* clear all flags */
-	adapter->vf_data[vf].flags = 0;
+	/* clear flags */
+	adapter->vf_data[vf].flags &= ~(IGB_VF_FLAG_PF_SET_MAC);
 	adapter->vf_data[vf].last_nack = jiffies;
 
 	/* reset offloads to defaults */
-	igb_set_vmolr(adapter, vf);
+	igb_set_vmolr(adapter, vf, true);
 
 	/* reset vlans for device */
 	igb_clear_vf_vfta(adapter, vf);
+	if (adapter->vf_data[vf].pf_vlan)
+		igb_ndo_set_vf_vlan(adapter->netdev, vf,
+				    adapter->vf_data[vf].pf_vlan,
+				    adapter->vf_data[vf].pf_qos);
+	else
+		igb_clear_vf_vfta(adapter, vf);
 
 	/* reset multicast table array for vf */
 	adapter->vf_data[vf].num_vf_mc_hashes = 0;
@@ -4528,7 +4595,8 @@ static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
 	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
 
 	/* generate a new mac address as we were hotplug removed/added */
-	random_ether_addr(vf_mac);
+	if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
+		random_ether_addr(vf_mac);
 
 	/* process remaining reset events */
 	igb_vf_reset(adapter, vf);
@@ -4641,7 +4709,10 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
 		retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
 		break;
 	case E1000_VF_SET_VLAN:
-		retval = igb_set_vf_vlan(adapter, msgbuf, vf);
+		if (adapter->vf_data[vf].pf_vlan)
+			retval = -1;
+		else
+			retval = igb_set_vf_vlan(adapter, msgbuf, vf);
 		break;
 	default:
 		dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
@@ -6003,6 +6074,43 @@ static int igb_set_vf_mac(struct igb_adapter *adapter,
 	return 0;
 }
 
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+		return -EINVAL;
+	adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+	dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+	dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
+				      " change effective.");
+	if (test_bit(__IGB_DOWN, &adapter->state)) {
+		dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
+			 " but the PF device is not up.\n");
+		dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
+			 " attempting to use the VF device.\n");
+	}
+	return igb_set_vf_mac(adapter, vf, mac);
+}
+
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+{
+	return -EOPNOTSUPP;
+}
+
+static int igb_ndo_get_vf_config(struct net_device *netdev,
+				 int vf, struct ifla_vf_info *ivi)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	if (vf >= adapter->vfs_allocated_count)
+		return -EINVAL;
+	ivi->vf = vf;
+	memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
+	ivi->tx_rate = 0;
+	ivi->vlan = adapter->vf_data[vf].pf_vlan;
+	ivi->qos = adapter->vf_data[vf].pf_qos;
+	return 0;
+}
+
 static void igb_vmm_control(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-- 
cgit v1.2.3


From e4af1af900328e4aa71cd5df75bb22669ab11522 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:05 +0000
Subject: tg3: Give MSI-X vec 1 rx backlog space

RSS ring 1 is responsible for submitting new rx buffers to the
hardware on behalf of all the other RSS rx return rings.  Up until now
this ring submitted its new rx buffers to the producer ring directly.
The following patch will require that this ring have a place to put
backlogged rx packets.  As a consequence, it can no longer submit new
buffers to the producer ring.

This patch adds code to allocate an extra shadow producer ring for this
RSS ring and adds RSS ring 1 to the list of rings needing buffer
transfers.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 46 +++++++++++++++++++++-------------------------
 drivers/net/tg3.h |  2 +-
 2 files changed, 22 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d29282f01c23..661e9ddd1401 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4733,7 +4733,7 @@ next_pkt_nopost:
 	tw32_rx_mbox(tnapi->consmbox, sw_idx);
 
 	/* Refill RX ring(s). */
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) || tnapi == &tp->napi[1]) {
+	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)) {
 		if (work_mask & RXD_OPAQUE_RING_STD) {
 			tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
 			tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
@@ -4755,7 +4755,8 @@ next_pkt_nopost:
 		tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
 		tpr->rx_jmb_prod_idx = jmb_prod_idx % TG3_RX_JUMBO_RING_SIZE;
 
-		napi_schedule(&tp->napi[1].napi);
+		if (tnapi != &tp->napi[1])
+			napi_schedule(&tp->napi[1].napi);
 	}
 
 	return received;
@@ -4893,25 +4894,23 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
 		work_done += tg3_rx(tnapi, budget - work_done);
 
 	if ((tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) && tnapi == &tp->napi[1]) {
+		struct tg3_rx_prodring_set *dpr = &tp->prodring[0];
 		int i;
-		u32 std_prod_idx = tp->prodring[0].rx_std_prod_idx;
-		u32 jmb_prod_idx = tp->prodring[0].rx_jmb_prod_idx;
+		u32 std_prod_idx = dpr->rx_std_prod_idx;
+		u32 jmb_prod_idx = dpr->rx_jmb_prod_idx;
 
-		for (i = 2; i < tp->irq_cnt; i++)
-			tg3_rx_prodring_xfer(tp, tnapi->prodring,
-					     tp->napi[i].prodring);
+		for (i = 1; i < tp->irq_cnt; i++)
+			tg3_rx_prodring_xfer(tp, dpr, tp->napi[i].prodring);
 
 		wmb();
 
-		if (std_prod_idx != tp->prodring[0].rx_std_prod_idx) {
-			u32 mbox = TG3_RX_STD_PROD_IDX_REG;
-			tw32_rx_mbox(mbox, tp->prodring[0].rx_std_prod_idx);
-		}
+		if (std_prod_idx != dpr->rx_std_prod_idx)
+			tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
+				     dpr->rx_std_prod_idx);
 
-		if (jmb_prod_idx != tp->prodring[0].rx_jmb_prod_idx) {
-			u32 mbox = TG3_RX_JMB_PROD_IDX_REG;
-			tw32_rx_mbox(mbox, tp->prodring[0].rx_jmb_prod_idx);
-		}
+		if (jmb_prod_idx != dpr->rx_jmb_prod_idx)
+			tw32_rx_mbox(TG3_RX_JMB_PROD_IDX_REG,
+				     dpr->rx_jmb_prod_idx);
 
 		mmiowb();
 	}
@@ -6173,8 +6172,7 @@ static void tg3_free_rings(struct tg3 *tp)
 			dev_kfree_skb_any(skb);
 		}
 
-		if (tp->irq_cnt == 1 || j != tp->irq_cnt - 1)
-			tg3_rx_prodring_free(tp, &tp->prodring[j]);
+		tg3_rx_prodring_free(tp, &tp->prodring[j]);
 	}
 }
 
@@ -6210,9 +6208,10 @@ static int tg3_init_rings(struct tg3 *tp)
 		if (tnapi->rx_rcb)
 			memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
 
-		if ((tp->irq_cnt == 1 || i != tp->irq_cnt - 1) &&
-			tg3_rx_prodring_alloc(tp, &tp->prodring[i]))
+		if (tg3_rx_prodring_alloc(tp, &tp->prodring[i])) {
+			tg3_free_rings(tp);
 			return -ENOMEM;
+		}
 	}
 
 	return 0;
@@ -6259,7 +6258,7 @@ static void tg3_free_consistent(struct tg3 *tp)
 		tp->hw_stats = NULL;
 	}
 
-	for (i = 0; i < (tp->irq_cnt == 1 ? 1 : tp->irq_cnt - 1); i++)
+	for (i = 0; i < tp->irq_cnt; i++)
 		tg3_rx_prodring_fini(tp, &tp->prodring[i]);
 }
 
@@ -6271,7 +6270,7 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 {
 	int i;
 
-	for (i = 0; i < (tp->irq_cnt == 1 ? 1 : tp->irq_cnt - 1); i++) {
+	for (i = 0; i < tp->irq_cnt; i++) {
 		if (tg3_rx_prodring_init(tp, &tp->prodring[i]))
 			goto err_out;
 	}
@@ -6336,10 +6335,7 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 			break;
 		}
 
-		if (tp->irq_cnt == 1)
-			tnapi->prodring = &tp->prodring[0];
-		else if (i)
-			tnapi->prodring = &tp->prodring[i - 1];
+		tnapi->prodring = &tp->prodring[i];
 
 		/*
 		 * If multivector RSS is enabled, vector 0 does not handle
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index e7f6214a1680..88a87bb618c0 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2717,7 +2717,7 @@ struct tg3 {
 	struct vlan_group		*vlgrp;
 #endif
 
-	struct tg3_rx_prodring_set	prodring[TG3_IRQ_MAX_VECS - 1];
+	struct tg3_rx_prodring_set	prodring[TG3_IRQ_MAX_VECS];
 
 
 	/* begin "everything else" cacheline(s) section */
-- 
cgit v1.2.3


From e92967bfb1f4fa7da7c425df9239c4bb615dec30 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:06 +0000
Subject: tg3: Prevent rx producer ring overruns

When operating in RSS mode, it is possible for one rx return ring to
submit enough rx buffers back to the hardware such that it inadvertently
overwrites data needed by another rx return ring.  This patch addresses
the problem by looking for non-NULL skb pointers in the
rx_[std|jmb]_buffers rings that parallel the rx producer rings.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 661e9ddd1401..a46c26764ba7 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4552,6 +4552,12 @@ static void tg3_recycle_rx(struct tg3_napi *tnapi,
 			   pci_unmap_addr(src_map, mapping));
 	dest_desc->addr_hi = src_desc->addr_hi;
 	dest_desc->addr_lo = src_desc->addr_lo;
+
+	/* Ensure that the update to the skb happens after the physical
+	 * addresses have been transferred to the new BD location.
+	 */
+	smp_wmb();
+
 	src_map->skb = NULL;
 }
 
@@ -4816,6 +4822,22 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
 		si = spr->rx_std_cons_idx;
 		di = dpr->rx_std_prod_idx;
 
+		for (i = di; i < di + cpycnt; i++) {
+			if (dpr->rx_std_buffers[i].skb) {
+				cpycnt = i - di;
+				break;
+			}
+		}
+
+		if (!cpycnt)
+			break;
+
+		/* Ensure that updates to the rx_std_buffers ring and the
+		 * shadowed hardware producer ring from tg3_recycle_skb() are
+		 * ordered correctly WRT the skb check above.
+		 */
+		smp_rmb();
+
 		memcpy(&dpr->rx_std_buffers[di],
 		       &spr->rx_std_buffers[si],
 		       cpycnt * sizeof(struct ring_info));
@@ -4856,6 +4878,22 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
 		si = spr->rx_jmb_cons_idx;
 		di = dpr->rx_jmb_prod_idx;
 
+		for (i = di; i < di + cpycnt; i++) {
+			if (dpr->rx_jmb_buffers[i].skb) {
+				cpycnt = i - di;
+				break;
+			}
+		}
+
+		if (!cpycnt)
+			break;
+
+		/* Ensure that updates to the rx_jmb_buffers ring and the
+		 * shadowed hardware producer ring from tg3_recycle_skb() are
+		 * ordered correctly WRT the skb check above.
+		 */
+		smp_rmb();
+
 		memcpy(&dpr->rx_jmb_buffers[di],
 		       &spr->rx_jmb_buffers[si],
 		       cpycnt * sizeof(struct ring_info));
-- 
cgit v1.2.3


From f89f38b8ec3171664314669a1396ab70b43e8961 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:07 +0000
Subject: tg3: Unwedge stuck MSI-X vectors

The previous patch changed the code so that new rx buffer submissions to
the hardware stall if a new submission would overwrite data needed by an
unserviced rx packet.  On very busy 5717 and 57765 asic rev devices,
there is a corner case where the hardware will fail to assert an MSI-X
interrupt for rx traffic.  If that vector's interrupt never has another
reason to assert, any rx buffers held will never be serviced.  If the
buffers are never serviced and the hardware consumes all the available
rx packets for other rx rings, deadlock will result.

The most reliable and least intrusive way to work around the problem is
to detect the case where new submissions would overwrite existing data
and force all rx interrupt vectors to fire.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 29 +++++++++++++++++++----------
 drivers/net/tg3.h |  1 +
 2 files changed, 20 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index a46c26764ba7..c140e1bf6e02 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -642,7 +642,6 @@ static void tg3_disable_ints(struct tg3 *tp)
 static void tg3_enable_ints(struct tg3 *tp)
 {
 	int i;
-	u32 coal_now = 0;
 
 	tp->irq_sync = 0;
 	wmb();
@@ -650,13 +649,14 @@ static void tg3_enable_ints(struct tg3 *tp)
 	tw32(TG3PCI_MISC_HOST_CTRL,
 	     (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
 
+	tp->coal_now = tp->coalesce_mode | HOSTCC_MODE_ENABLE;
 	for (i = 0; i < tp->irq_cnt; i++) {
 		struct tg3_napi *tnapi = &tp->napi[i];
 		tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
 		if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
 			tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
 
-		coal_now |= tnapi->coal_now;
+		tp->coal_now |= tnapi->coal_now;
 	}
 
 	/* Force an initial interrupt */
@@ -664,8 +664,9 @@ static void tg3_enable_ints(struct tg3 *tp)
 	    (tp->napi[0].hw_status->status & SD_STATUS_UPDATED))
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
 	else
-		tw32(HOSTCC_MODE, tp->coalesce_mode |
-		     HOSTCC_MODE_ENABLE | coal_now);
+		tw32(HOSTCC_MODE, tp->coal_now);
+
+	tp->coal_now &= ~(tp->napi[0].coal_now | tp->napi[1].coal_now);
 }
 
 static inline unsigned int tg3_has_work(struct tg3_napi *tnapi)
@@ -4794,12 +4795,12 @@ static void tg3_poll_link(struct tg3 *tp)
 	}
 }
 
-static void tg3_rx_prodring_xfer(struct tg3 *tp,
-				 struct tg3_rx_prodring_set *dpr,
-				 struct tg3_rx_prodring_set *spr)
+static int tg3_rx_prodring_xfer(struct tg3 *tp,
+				struct tg3_rx_prodring_set *dpr,
+				struct tg3_rx_prodring_set *spr)
 {
 	u32 si, di, cpycnt, src_prod_idx;
-	int i;
+	int i, err = 0;
 
 	while (1) {
 		src_prod_idx = spr->rx_std_prod_idx;
@@ -4825,6 +4826,7 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
 		for (i = di; i < di + cpycnt; i++) {
 			if (dpr->rx_std_buffers[i].skb) {
 				cpycnt = i - di;
+				err = -ENOSPC;
 				break;
 			}
 		}
@@ -4881,6 +4883,7 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
 		for (i = di; i < di + cpycnt; i++) {
 			if (dpr->rx_jmb_buffers[i].skb) {
 				cpycnt = i - di;
+				err = -ENOSPC;
 				break;
 			}
 		}
@@ -4911,6 +4914,8 @@ static void tg3_rx_prodring_xfer(struct tg3 *tp,
 		dpr->rx_jmb_prod_idx = (dpr->rx_jmb_prod_idx + cpycnt) %
 				       TG3_RX_JUMBO_RING_SIZE;
 	}
+
+	return err;
 }
 
 static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
@@ -4933,12 +4938,13 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
 
 	if ((tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) && tnapi == &tp->napi[1]) {
 		struct tg3_rx_prodring_set *dpr = &tp->prodring[0];
-		int i;
+		int i, err = 0;
 		u32 std_prod_idx = dpr->rx_std_prod_idx;
 		u32 jmb_prod_idx = dpr->rx_jmb_prod_idx;
 
 		for (i = 1; i < tp->irq_cnt; i++)
-			tg3_rx_prodring_xfer(tp, dpr, tp->napi[i].prodring);
+			err |= tg3_rx_prodring_xfer(tp, dpr,
+						    tp->napi[i].prodring);
 
 		wmb();
 
@@ -4951,6 +4957,9 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
 				     dpr->rx_jmb_prod_idx);
 
 		mmiowb();
+
+		if (err)
+			tw32_f(HOSTCC_MODE, tp->coal_now);
 	}
 
 	return work_done;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 88a87bb618c0..cc8bf7d6823a 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2699,6 +2699,7 @@ struct tg3 {
 	struct net_device		*dev;
 	struct pci_dev			*pdev;
 
+	u32				coal_now;
 	u32				msg_enable;
 
 	/* begin "tx thread" cacheline section */
-- 
cgit v1.2.3


From 6b10c1653e425e30cff7f41d0e6f9743bfa9810f Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:08 +0000
Subject: tg3: Fix 57765 A0 bootcode race condition

On A0 revision of 57765 asic rev devices, the bootcode will perform some
hardware operations, after the magic signature is presented, that will
collide with setup operations performed by the driver.  The best way to
avoid the contention is to have the driver delay an additional 10
milliseconds.  B0 revisions of the chip will make this workaround
unnecessary.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 7 +++++++
 drivers/net/tg3.h | 1 +
 2 files changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c140e1bf6e02..2c5e1b7e1088 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -6721,6 +6721,13 @@ static int tg3_poll_fw(struct tg3 *tp)
 		       tp->dev->name);
 	}
 
+	if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
+		/* The 57765 A0 needs a little more
+		 * time to do some important work.
+		 */
+		mdelay(10);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cc8bf7d6823a..46db4ad46bbc 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -110,6 +110,7 @@
 #define  CHIPREV_ID_57780_A0		 0x57780000
 #define  CHIPREV_ID_57780_A1		 0x57780001
 #define  CHIPREV_ID_5717_A0		 0x05717000
+#define  CHIPREV_ID_57765_A0		 0x57785000
 #define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
 #define   ASIC_REV_5700			 0x07
 #define   ASIC_REV_5701			 0x00
-- 
cgit v1.2.3


From 0339e4e3effeae71e2b19c6340ef9672fb7a2cb3 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:09 +0000
Subject: tg3: Turn off multiple DMA reads for 5717

The 5717's DMA read engine has a bug when initiating multiple DMA reads
across the PCIe bus.  This patch disables the feature.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 3 +++
 drivers/net/tg3.h | 1 +
 2 files changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2c5e1b7e1088..673ea314aa18 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7915,6 +7915,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		      RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |
 		      RDMAC_MODE_LNGREAD_ENAB);
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+		rdmac_mode |= RDMAC_MODE_MULT_DMA_RD_DIS;
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 46db4ad46bbc..a8fb53aaf742 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1258,6 +1258,7 @@
 #define  RDMAC_MODE_MBUF_SBD_CRPT_ENAB	 0x00002000
 #define  RDMAC_MODE_FIFO_SIZE_128	 0x00020000
 #define  RDMAC_MODE_FIFO_LONG_BURST	 0x00030000
+#define  RDMAC_MODE_MULT_DMA_RD_DIS	 0x01000000
 #define  RDMAC_MODE_IPV4_LSO_EN		 0x08000000
 #define  RDMAC_MODE_IPV6_LSO_EN		 0x10000000
 #define RDMAC_STATUS			0x00004804
-- 
cgit v1.2.3


From 603f11738cee4d46a2a1d394ae80d718f8d37cba Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:10 +0000
Subject: tg3: Reset phy during bringup when using phylib

The driver puts the phy into low-power mode when it releases the device.
If the device were to be reacquired, the phy needs a reset to bring it
back to full powered operation.  This patch allows phylib-enabled
devices to reset the phy.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 673ea314aa18..33dfb7fda8cc 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7595,8 +7595,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tg3_abort_hw(tp, 1);
 	}
 
-	if (reset_phy &&
-	    !(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB))
+	if (reset_phy)
 		tg3_phy_reset(tp);
 
 	err = tg3_chip_reset(tp);
-- 
cgit v1.2.3


From c88734054e787542ea093b02120e324e92cad882 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:11 +0000
Subject: tg3: Fix napi assignments in loopback test

The 57765 lacks TSS support.  This renders the napi assignments
incorrect in the loopback test function.  This patch fixes the problem.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 33dfb7fda8cc..cb6967947c30 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10780,12 +10780,12 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 	struct tg3_napi *tnapi, *rnapi;
 	struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
 
+	tnapi = &tp->napi[0];
+	rnapi = &tp->napi[0];
 	if (tp->irq_cnt > 1) {
-		tnapi = &tp->napi[1];
 		rnapi = &tp->napi[1];
-	} else {
-		tnapi = &tp->napi[0];
-		rnapi = &tp->napi[0];
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+			tnapi = &tp->napi[1];
 	}
 	coal_now = tnapi->coal_now | rnapi->coal_now;
 
-- 
cgit v1.2.3


From 1061b7c56482310bbb8197045d51e2986afabfce Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:12 +0000
Subject: tg3: Fix AC131 loopback test errors for 5785

The AC131 does not enable the forced transmit clock settings
immediately.  The workaround is to read the register again to get the
setting to take effect.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 8 ++++++--
 drivers/net/tg3.h | 3 +++
 2 files changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index cb6967947c30..128126a87c34 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10822,8 +10822,12 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 
 		mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
 		if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
-			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
-				tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
+			tg3_writephy(tp, MII_TG3_FET_PTEST,
+				     MII_TG3_FET_PTEST_FRC_TX_LINK |
+				     MII_TG3_FET_PTEST_FRC_TX_LOCK);
+			/* The write needs to be flushed for the AC131 */
+			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+				tg3_readphy(tp, MII_TG3_FET_PTEST, &val);
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
 		} else
 			mac_mode |= MAC_MODE_PORT_MODE_GMII;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index a8fb53aaf742..b4fd59623cfb 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2112,6 +2112,9 @@
 
 /* Fast Ethernet Tranceiver definitions */
 #define MII_TG3_FET_PTEST		0x17
+#define  MII_TG3_FET_PTEST_FRC_TX_LINK	0x1000
+#define  MII_TG3_FET_PTEST_FRC_TX_LOCK	0x0800
+
 #define MII_TG3_FET_TEST		0x1f
 #define  MII_TG3_FET_SHADOW_EN		0x0080
 
-- 
cgit v1.2.3


From b3b3f04fb587ecb61b5baa6c1c5f0e666fd12d73 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 12 Feb 2010 14:47:13 +0000
Subject: tg3: Update driver version to 3.107

This patch updates the tg3 version to 3.107.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 128126a87c34..385434ff3960 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.106"
-#define DRV_MODULE_RELDATE	"January 12, 2010"
+#define DRV_MODULE_VERSION	"3.107"
+#define DRV_MODULE_RELDATE	"February 12, 2010"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
-- 
cgit v1.2.3


From f10a1f2e7e93a35cb603b63090ff0e70a576a641 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 14 Feb 2010 22:40:39 -0800
Subject: niu: Use pr_<level>, netdev_<level> and netif_<level> macros

Remove #define PFX
Add pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks to pr_<level>
Convert printks without levels to pr_cont
Convert pr_<level> with np->dev to netdev_<level>
Convert dev_<level> to netdev_<level>
Convert niudbg to netif_printk
Convert niuinfo, niuwarn macros to netif_<level>(priv, type, dev...
Coalesce long formats
Convert embedded function names to "%s", __func__
Always use "%s()..." when __func__ is printed

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/niu.c | 703 ++++++++++++++++++++++++------------------------------
 1 file changed, 311 insertions(+), 392 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 7b52d9762b00..347788f11c74 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -3,6 +3,8 @@
  * Copyright (C) 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
@@ -33,7 +35,6 @@
 #include "niu.h"
 
 #define DRV_MODULE_NAME		"niu"
-#define PFX DRV_MODULE_NAME	": "
 #define DRV_MODULE_VERSION	"1.0"
 #define DRV_MODULE_RELDATE	"Nov 14, 2008"
 
@@ -89,21 +90,6 @@ static int debug = -1;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "NIU debug level");
 
-#define niudbg(TYPE, f, a...) \
-do {	if ((np)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_DEBUG PFX f, ## a); \
-} while (0)
-
-#define niuinfo(TYPE, f, a...) \
-do {	if ((np)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_INFO PFX f, ## a); \
-} while (0)
-
-#define niuwarn(TYPE, f, a...) \
-do {	if ((np)->msg_enable & NETIF_MSG_##TYPE) \
-		printk(KERN_WARNING PFX f, ## a); \
-} while (0)
-
 #define niu_lock_parent(np, flags) \
 	spin_lock_irqsave(&np->parent->lock, flags)
 #define niu_unlock_parent(np, flags) \
@@ -135,10 +121,9 @@ static int __niu_set_and_wait_clear_mac(struct niu *np, unsigned long reg,
 	nw64_mac(reg, bits);
 	err = __niu_wait_bits_clear_mac(np, reg, bits, limit, delay);
 	if (err)
-		dev_err(np->device, PFX "%s: bits (%llx) of register %s "
-			"would not clear, val[%llx]\n",
-			np->dev->name, (unsigned long long) bits, reg_name,
-			(unsigned long long) nr64_mac(reg));
+		netdev_err(np->dev, "bits (%llx) of register %s would not clear, val[%llx]\n",
+			   (unsigned long long)bits, reg_name,
+			   (unsigned long long)nr64_mac(reg));
 	return err;
 }
 
@@ -175,10 +160,9 @@ static int __niu_set_and_wait_clear_ipp(struct niu *np, unsigned long reg,
 
 	err = __niu_wait_bits_clear_ipp(np, reg, bits, limit, delay);
 	if (err)
-		dev_err(np->device, PFX "%s: bits (%llx) of register %s "
-			"would not clear, val[%llx]\n",
-			np->dev->name, (unsigned long long) bits, reg_name,
-			(unsigned long long) nr64_ipp(reg));
+		netdev_err(np->dev, "bits (%llx) of register %s would not clear, val[%llx]\n",
+			   (unsigned long long)bits, reg_name,
+			   (unsigned long long)nr64_ipp(reg));
 	return err;
 }
 
@@ -216,10 +200,9 @@ static int __niu_set_and_wait_clear(struct niu *np, unsigned long reg,
 	nw64(reg, bits);
 	err = __niu_wait_bits_clear(np, reg, bits, limit, delay);
 	if (err)
-		dev_err(np->device, PFX "%s: bits (%llx) of register %s "
-			"would not clear, val[%llx]\n",
-			np->dev->name, (unsigned long long) bits, reg_name,
-			(unsigned long long) nr64(reg));
+		netdev_err(np->dev, "bits (%llx) of register %s would not clear, val[%llx]\n",
+			   (unsigned long long)bits, reg_name,
+			   (unsigned long long)nr64(reg));
 	return err;
 }
 
@@ -475,9 +458,8 @@ static int serdes_init_niu_1g_serdes(struct niu *np)
 	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
 			 ESR2_TI_PLL_CFG_L, pll_cfg);
 	if (err) {
-		dev_err(np->device, PFX "NIU Port %d "
-			"serdes_init_niu_1g_serdes: "
-			"mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+		netdev_err(np->dev, "NIU Port %d %s() mdio write to ESR2_TI_PLL_CFG_L failed\n",
+			   np->port, __func__);
 		return err;
 	}
 
@@ -486,9 +468,8 @@ static int serdes_init_niu_1g_serdes(struct niu *np)
 	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
 			 ESR2_TI_PLL_STS_L, pll_sts);
 	if (err) {
-		dev_err(np->device, PFX "NIU Port %d "
-			"serdes_init_niu_1g_serdes: "
-			"mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+		netdev_err(np->dev, "NIU Port %d %s() mdio write to ESR2_TI_PLL_STS_L failed\n",
+			   np->port, __func__);
 		return err;
 	}
 
@@ -531,8 +512,8 @@ static int serdes_init_niu_1g_serdes(struct niu *np)
 	}
 
 	if ((sig & mask) != val) {
-		dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
-			"[%08x]\n", np->port, (int) (sig & mask), (int) val);
+		netdev_err(np->dev, "Port %u signal bits [%08x] are not [%08x]\n",
+			   np->port, (int)(sig & mask), (int)val);
 		return -ENODEV;
 	}
 
@@ -569,9 +550,8 @@ static int serdes_init_niu_10g_serdes(struct niu *np)
 	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
 			 ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
 	if (err) {
-		dev_err(np->device, PFX "NIU Port %d "
-			"serdes_init_niu_10g_serdes: "
-			"mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+		netdev_err(np->dev, "NIU Port %d %s() mdio write to ESR2_TI_PLL_CFG_L failed\n",
+			   np->port, __func__);
 		return err;
 	}
 
@@ -580,9 +560,8 @@ static int serdes_init_niu_10g_serdes(struct niu *np)
 	err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
 			 ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
 	if (err) {
-		dev_err(np->device, PFX "NIU Port %d "
-			"serdes_init_niu_10g_serdes: "
-			"mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+		netdev_err(np->dev, "NIU Port %d %s() mdio write to ESR2_TI_PLL_STS_L failed\n",
+			   np->port, __func__);
 		return err;
 	}
 
@@ -639,9 +618,8 @@ static int serdes_init_niu_10g_serdes(struct niu *np)
 	}
 
 	if ((sig & mask) != val) {
-		pr_info(PFX "NIU Port %u signal bits [%08x] are not "
-			"[%08x] for 10G...trying 1G\n",
-			np->port, (int) (sig & mask), (int) val);
+		pr_info("NIU Port %u signal bits [%08x] are not [%08x] for 10G...trying 1G\n",
+			np->port, (int)(sig & mask), (int)val);
 
 		/* 10G failed, try initializing at 1G */
 		err = serdes_init_niu_1g_serdes(np);
@@ -649,8 +627,8 @@ static int serdes_init_niu_10g_serdes(struct niu *np)
 			np->flags &= ~NIU_FLAGS_10G;
 			np->mac_xcvr = MAC_XCVR_PCS;
 		}  else {
-			dev_err(np->device, PFX "Port %u 10G/1G SERDES "
-				"Link Failed \n", np->port);
+			netdev_err(np->dev, "Port %u 10G/1G SERDES Link Failed\n",
+				   np->port);
 			return -ENODEV;
 		}
 	}
@@ -764,9 +742,8 @@ static int esr_reset(struct niu *np)
 	if (err)
 		return err;
 	if (reset != 0) {
-		dev_err(np->device, PFX "Port %u ESR_RESET "
-			"did not clear [%08x]\n",
-			np->port, reset);
+		netdev_err(np->dev, "Port %u ESR_RESET did not clear [%08x]\n",
+			   np->port, reset);
 		return -ENODEV;
 	}
 
@@ -890,8 +867,8 @@ static int serdes_init_10g(struct niu *np)
 			np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
 			return 0;
 		}
-		dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
-			"[%08x]\n", np->port, (int) (sig & mask), (int) val);
+		netdev_err(np->dev, "Port %u signal bits [%08x] are not [%08x]\n",
+			   np->port, (int)(sig & mask), (int)val);
 		return -ENODEV;
 	}
 	if (np->flags & NIU_FLAGS_HOTPLUG_PHY)
@@ -1039,8 +1016,8 @@ static int serdes_init_1g_serdes(struct niu *np)
 	}
 
 	if ((sig & mask) != val) {
-		dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
-			"[%08x]\n", np->port, (int) (sig & mask), (int) val);
+		netdev_err(np->dev, "Port %u signal bits [%08x] are not [%08x]\n",
+			   np->port, (int)(sig & mask), (int)val);
 		return -ENODEV;
 	}
 
@@ -1332,8 +1309,8 @@ static int bcm8704_reset(struct niu *np)
 			break;
 	}
 	if (limit < 0) {
-		dev_err(np->device, PFX "Port %u PHY will not reset "
-			"(bmcr=%04x)\n", np->port, (err & 0xffff));
+		netdev_err(np->dev, "Port %u PHY will not reset (bmcr=%04x)\n",
+			   np->port, (err & 0xffff));
 		return -ENODEV;
 	}
 	return 0;
@@ -1515,21 +1492,18 @@ static int xcvr_diag_bcm870x(struct niu *np)
 			MII_STAT1000);
 	if (err < 0)
 		return err;
-	pr_info(PFX "Port %u PMA_PMD(MII_STAT1000) [%04x]\n",
-		np->port, err);
+	pr_info("Port %u PMA_PMD(MII_STAT1000) [%04x]\n", np->port, err);
 
 	err = mdio_read(np, np->phy_addr, BCM8704_USER_DEV3_ADDR, 0x20);
 	if (err < 0)
 		return err;
-	pr_info(PFX "Port %u USER_DEV3(0x20) [%04x]\n",
-		np->port, err);
+	pr_info("Port %u USER_DEV3(0x20) [%04x]\n", np->port, err);
 
 	err = mdio_read(np, np->phy_addr, BCM8704_PHYXS_DEV_ADDR,
 			MII_NWAYTEST);
 	if (err < 0)
 		return err;
-	pr_info(PFX "Port %u PHYXS(MII_NWAYTEST) [%04x]\n",
-		np->port, err);
+	pr_info("Port %u PHYXS(MII_NWAYTEST) [%04x]\n", np->port, err);
 #endif
 
 	/* XXX dig this out it might not be so useful XXX */
@@ -1555,11 +1529,11 @@ static int xcvr_diag_bcm870x(struct niu *np)
 
 	if (analog_stat0 != 0x03fc) {
 		if ((analog_stat0 == 0x43bc) && (tx_alarm_status != 0)) {
-			pr_info(PFX "Port %u cable not connected "
-				"or bad cable.\n", np->port);
+			pr_info("Port %u cable not connected or bad cable\n",
+				np->port);
 		} else if (analog_stat0 == 0x639c) {
-			pr_info(PFX "Port %u optical module is bad "
-				"or missing.\n", np->port);
+			pr_info("Port %u optical module is bad or missing\n",
+				np->port);
 		}
 	}
 
@@ -1699,8 +1673,8 @@ static int mii_reset(struct niu *np)
 			break;
 	}
 	if (limit < 0) {
-		dev_err(np->device, PFX "Port %u MII would not reset, "
-			"bmcr[%04x]\n", np->port, err);
+		netdev_err(np->dev, "Port %u MII would not reset, bmcr[%04x]\n",
+			   np->port, err);
 		return -ENODEV;
 	}
 
@@ -1895,7 +1869,7 @@ static int mii_init_common(struct niu *np)
 		return err;
 	bmsr = err;
 
-	pr_info(PFX "Port %u after MII init bmcr[%04x] bmsr[%04x]\n",
+	pr_info("Port %u after MII init bmcr[%04x] bmsr[%04x]\n",
 		np->port, bmcr, bmsr);
 #endif
 
@@ -1948,16 +1922,12 @@ static int niu_link_status_common(struct niu *np, int link_up)
 	unsigned long flags;
 
 	if (!netif_carrier_ok(dev) && link_up) {
-		niuinfo(LINK, "%s: Link is up at %s, %s duplex\n",
-		       dev->name,
-		       (lp->active_speed == SPEED_10000 ?
-			"10Gb/sec" :
-			(lp->active_speed == SPEED_1000 ?
-			 "1Gb/sec" :
-			 (lp->active_speed == SPEED_100 ?
-			  "100Mbit/sec" : "10Mbit/sec"))),
-		       (lp->active_duplex == DUPLEX_FULL ?
-			"full" : "half"));
+		netif_info(np, link, dev, "Link is up at %s, %s duplex\n",
+			   lp->active_speed == SPEED_10000 ? "10Gb/sec" :
+			   lp->active_speed == SPEED_1000 ? "1Gb/sec" :
+			   lp->active_speed == SPEED_100 ? "100Mbit/sec" :
+			   "10Mbit/sec",
+			   lp->active_duplex == DUPLEX_FULL ? "full" : "half");
 
 		spin_lock_irqsave(&np->lock, flags);
 		niu_init_xif(np);
@@ -1966,7 +1936,7 @@ static int niu_link_status_common(struct niu *np, int link_up)
 
 		netif_carrier_on(dev);
 	} else if (netif_carrier_ok(dev) && !link_up) {
-		niuwarn(LINK, "%s: Link is down\n", dev->name);
+		netif_warn(np, link, dev, "Link is down\n");
 		spin_lock_irqsave(&np->lock, flags);
 		niu_handle_led(np, 0);
 		spin_unlock_irqrestore(&np->lock, flags);
@@ -2232,8 +2202,8 @@ static int link_status_10g_hotplug(struct niu *np, int *link_up_p)
 			} else {
 				np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
 				*link_up_p = 0;
-				niuwarn(LINK, "%s: Hotplug PHY Removed\n",
-					np->dev->name);
+				netif_warn(np, link, np->dev,
+					   "Hotplug PHY Removed\n");
 			}
 		}
 out:
@@ -2531,8 +2501,8 @@ static int serdes_init_10g_serdes(struct niu *np)
 			np->flags &= ~NIU_FLAGS_10G;
 			np->mac_xcvr = MAC_XCVR_PCS;
 		}  else {
-			dev_err(np->device, PFX "Port %u 10G/1G SERDES Link Failed \n",
-			 np->port);
+			netdev_err(np->dev, "Port %u 10G/1G SERDES Link Failed\n",
+				   np->port);
 			return -ENODEV;
 		}
 	}
@@ -3234,23 +3204,25 @@ static int fflp_early_init(struct niu *np)
 	parent = np->parent;
 	err = 0;
 	if (!(parent->flags & PARENT_FLGS_CLS_HWINIT)) {
-		niudbg(PROBE, "fflp_early_init: Initting hw on port %u\n",
-		       np->port);
+		netif_printk(np, probe, KERN_DEBUG, np->dev,
+			     "%s() Initting hw on port %u\n",
+			     __func__, np->port);
 		if (np->parent->plat_type != PLAT_TYPE_NIU) {
 			fflp_reset(np);
 			fflp_set_timings(np);
 			err = fflp_disable_all_partitions(np);
 			if (err) {
-				niudbg(PROBE, "fflp_disable_all_partitions "
-				       "failed, err=%d\n", err);
+				netif_printk(np, probe, KERN_DEBUG, np->dev,
+					     "fflp_disable_all_partitions failed, err=%d\n",
+					     err);
 				goto out;
 			}
 		}
 
 		err = tcam_early_init(np);
 		if (err) {
-			niudbg(PROBE, "tcam_early_init failed, err=%d\n",
-			       err);
+			netif_printk(np, probe, KERN_DEBUG, np->dev,
+				     "tcam_early_init failed, err=%d\n", err);
 			goto out;
 		}
 		fflp_llcsnap_enable(np, 1);
@@ -3260,22 +3232,24 @@ static int fflp_early_init(struct niu *np)
 
 		err = tcam_flush_all(np);
 		if (err) {
-			niudbg(PROBE, "tcam_flush_all failed, err=%d\n",
-			       err);
+			netif_printk(np, probe, KERN_DEBUG, np->dev,
+				     "tcam_flush_all failed, err=%d\n", err);
 			goto out;
 		}
 		if (np->parent->plat_type != PLAT_TYPE_NIU) {
 			err = fflp_hash_clear(np);
 			if (err) {
-				niudbg(PROBE, "fflp_hash_clear failed, "
-				       "err=%d\n", err);
+				netif_printk(np, probe, KERN_DEBUG, np->dev,
+					     "fflp_hash_clear failed, err=%d\n",
+					     err);
 				goto out;
 			}
 		}
 
 		vlan_tbl_clear(np);
 
-		niudbg(PROBE, "fflp_early_init: Success\n");
+		netif_printk(np, probe, KERN_DEBUG, np->dev,
+			     "%s() Success\n", __func__);
 		parent->flags |= PARENT_FLGS_CLS_HWINIT;
 	}
 out:
@@ -3665,8 +3639,8 @@ static void niu_tx_work(struct niu *np, struct tx_ring_info *rp)
 
 	cons = rp->cons;
 
-	niudbg(TX_DONE, "%s: niu_tx_work() pkt_cnt[%u] cons[%d]\n",
-	       np->dev->name, pkt_cnt, cons);
+	netif_printk(np, tx_done, KERN_DEBUG, np->dev,
+		     "%s() pkt_cnt[%u] cons[%d]\n", __func__, pkt_cnt, cons);
 
 	while (pkt_cnt--)
 		cons = release_tx_packet(np, rp, cons);
@@ -3714,11 +3688,12 @@ static inline void niu_sync_rx_discard_stats(struct niu *np,
 		rp->rx_errors += misc & RXMISC_COUNT;
 
 		if (unlikely(misc & RXMISC_OFLOW))
-			dev_err(np->device, "rx-%d: Counter overflow "
-				"RXMISC discard\n", rx_channel);
+			dev_err(np->device, "rx-%d: Counter overflow RXMISC discard\n",
+				rx_channel);
 
-		niudbg(RX_ERR, "%s-rx-%d: MISC drop=%u over=%u\n",
-		       np->dev->name, rx_channel, misc, misc-limit);
+		netif_printk(np, rx_err, KERN_DEBUG, np->dev,
+			     "rx-%d: MISC drop=%u over=%u\n",
+			     rx_channel, misc, misc-limit);
 	}
 
 	/* WRED (Weighted Random Early Discard) by hardware */
@@ -3728,11 +3703,11 @@ static inline void niu_sync_rx_discard_stats(struct niu *np,
 		rp->rx_dropped += wred & RED_DIS_CNT_COUNT;
 
 		if (unlikely(wred & RED_DIS_CNT_OFLOW))
-			dev_err(np->device, "rx-%d: Counter overflow "
-				"WRED discard\n", rx_channel);
+			dev_err(np->device, "rx-%d: Counter overflow WRED discard\n", rx_channel);
 
-		niudbg(RX_ERR, "%s-rx-%d: WRED drop=%u over=%u\n",
-		       np->dev->name, rx_channel, wred, wred-limit);
+		netif_printk(np, rx_err, KERN_DEBUG, np->dev,
+			     "rx-%d: WRED drop=%u over=%u\n",
+			     rx_channel, wred, wred-limit);
 	}
 }
 
@@ -3753,8 +3728,9 @@ static int niu_rx_work(struct napi_struct *napi, struct niu *np,
 	mbox->rx_dma_ctl_stat = 0;
 	mbox->rcrstat_a = 0;
 
-	niudbg(RX_STATUS, "%s: niu_rx_work(chan[%d]), stat[%llx] qlen=%d\n",
-	       np->dev->name, rp->rx_channel, (unsigned long long) stat, qlen);
+	netif_printk(np, rx_status, KERN_DEBUG, np->dev,
+		     "%s(chan[%d]), stat[%llx] qlen=%d\n",
+		     __func__, rp->rx_channel, (unsigned long long)stat, qlen);
 
 	rcr_done = work_done = 0;
 	qlen = min(qlen, budget);
@@ -3791,8 +3767,8 @@ static int niu_poll_core(struct niu *np, struct niu_ldg *lp, int budget)
 	u32 rx_vec = (v0 & 0xffffffff);
 	int i, work_done = 0;
 
-	niudbg(INTR, "%s: niu_poll_core() v0[%016llx]\n",
-	       np->dev->name, (unsigned long long) v0);
+	netif_printk(np, intr, KERN_DEBUG, np->dev,
+		     "%s() v0[%016llx]\n", __func__, (unsigned long long)v0);
 
 	for (i = 0; i < np->num_tx_rings; i++) {
 		struct tx_ring_info *rp = &np->tx_rings[i];
@@ -3837,39 +3813,38 @@ static int niu_poll(struct napi_struct *napi, int budget)
 static void niu_log_rxchan_errors(struct niu *np, struct rx_ring_info *rp,
 				  u64 stat)
 {
-	dev_err(np->device, PFX "%s: RX channel %u errors ( ",
-		np->dev->name, rp->rx_channel);
+	netdev_err(np->dev, "RX channel %u errors ( ", rp->rx_channel);
 
 	if (stat & RX_DMA_CTL_STAT_RBR_TMOUT)
-		printk("RBR_TMOUT ");
+		pr_cont("RBR_TMOUT ");
 	if (stat & RX_DMA_CTL_STAT_RSP_CNT_ERR)
-		printk("RSP_CNT ");
+		pr_cont("RSP_CNT ");
 	if (stat & RX_DMA_CTL_STAT_BYTE_EN_BUS)
-		printk("BYTE_EN_BUS ");
+		pr_cont("BYTE_EN_BUS ");
 	if (stat & RX_DMA_CTL_STAT_RSP_DAT_ERR)
-		printk("RSP_DAT ");
+		pr_cont("RSP_DAT ");
 	if (stat & RX_DMA_CTL_STAT_RCR_ACK_ERR)
-		printk("RCR_ACK ");
+		pr_cont("RCR_ACK ");
 	if (stat & RX_DMA_CTL_STAT_RCR_SHA_PAR)
-		printk("RCR_SHA_PAR ");
+		pr_cont("RCR_SHA_PAR ");
 	if (stat & RX_DMA_CTL_STAT_RBR_PRE_PAR)
-		printk("RBR_PRE_PAR ");
+		pr_cont("RBR_PRE_PAR ");
 	if (stat & RX_DMA_CTL_STAT_CONFIG_ERR)
-		printk("CONFIG ");
+		pr_cont("CONFIG ");
 	if (stat & RX_DMA_CTL_STAT_RCRINCON)
-		printk("RCRINCON ");
+		pr_cont("RCRINCON ");
 	if (stat & RX_DMA_CTL_STAT_RCRFULL)
-		printk("RCRFULL ");
+		pr_cont("RCRFULL ");
 	if (stat & RX_DMA_CTL_STAT_RBRFULL)
-		printk("RBRFULL ");
+		pr_cont("RBRFULL ");
 	if (stat & RX_DMA_CTL_STAT_RBRLOGPAGE)
-		printk("RBRLOGPAGE ");
+		pr_cont("RBRLOGPAGE ");
 	if (stat & RX_DMA_CTL_STAT_CFIGLOGPAGE)
-		printk("CFIGLOGPAGE ");
+		pr_cont("CFIGLOGPAGE ");
 	if (stat & RX_DMA_CTL_STAT_DC_FIFO_ERR)
-		printk("DC_FIDO ");
+		pr_cont("DC_FIDO ");
 
-	printk(")\n");
+	pr_cont(")\n");
 }
 
 static int niu_rx_error(struct niu *np, struct rx_ring_info *rp)
@@ -3883,9 +3858,9 @@ static int niu_rx_error(struct niu *np, struct rx_ring_info *rp)
 		err = -EINVAL;
 
 	if (err) {
-		dev_err(np->device, PFX "%s: RX channel %u error, stat[%llx]\n",
-			np->dev->name, rp->rx_channel,
-			(unsigned long long) stat);
+		netdev_err(np->dev, "RX channel %u error, stat[%llx]\n",
+			   rp->rx_channel,
+			   (unsigned long long) stat);
 
 		niu_log_rxchan_errors(np, rp, stat);
 	}
@@ -3899,27 +3874,26 @@ static int niu_rx_error(struct niu *np, struct rx_ring_info *rp)
 static void niu_log_txchan_errors(struct niu *np, struct tx_ring_info *rp,
 				  u64 cs)
 {
-	dev_err(np->device, PFX "%s: TX channel %u errors ( ",
-		np->dev->name, rp->tx_channel);
+	netdev_err(np->dev, "TX channel %u errors ( ", rp->tx_channel);
 
 	if (cs & TX_CS_MBOX_ERR)
-		printk("MBOX ");
+		pr_cont("MBOX ");
 	if (cs & TX_CS_PKT_SIZE_ERR)
-		printk("PKT_SIZE ");
+		pr_cont("PKT_SIZE ");
 	if (cs & TX_CS_TX_RING_OFLOW)
-		printk("TX_RING_OFLOW ");
+		pr_cont("TX_RING_OFLOW ");
 	if (cs & TX_CS_PREF_BUF_PAR_ERR)
-		printk("PREF_BUF_PAR ");
+		pr_cont("PREF_BUF_PAR ");
 	if (cs & TX_CS_NACK_PREF)
-		printk("NACK_PREF ");
+		pr_cont("NACK_PREF ");
 	if (cs & TX_CS_NACK_PKT_RD)
-		printk("NACK_PKT_RD ");
+		pr_cont("NACK_PKT_RD ");
 	if (cs & TX_CS_CONF_PART_ERR)
-		printk("CONF_PART ");
+		pr_cont("CONF_PART ");
 	if (cs & TX_CS_PKT_PRT_ERR)
-		printk("PKT_PTR ");
+		pr_cont("PKT_PTR ");
 
-	printk(")\n");
+	pr_cont(")\n");
 }
 
 static int niu_tx_error(struct niu *np, struct tx_ring_info *rp)
@@ -3930,12 +3904,11 @@ static int niu_tx_error(struct niu *np, struct tx_ring_info *rp)
 	logh = nr64(TX_RNG_ERR_LOGH(rp->tx_channel));
 	logl = nr64(TX_RNG_ERR_LOGL(rp->tx_channel));
 
-	dev_err(np->device, PFX "%s: TX channel %u error, "
-		"cs[%llx] logh[%llx] logl[%llx]\n",
-		np->dev->name, rp->tx_channel,
-		(unsigned long long) cs,
-		(unsigned long long) logh,
-		(unsigned long long) logl);
+	netdev_err(np->dev, "TX channel %u error, cs[%llx] logh[%llx] logl[%llx]\n",
+		   rp->tx_channel,
+		   (unsigned long long)cs,
+		   (unsigned long long)logh,
+		   (unsigned long long)logl);
 
 	niu_log_txchan_errors(np, rp, cs);
 
@@ -3954,9 +3927,8 @@ static int niu_mif_interrupt(struct niu *np)
 			phy_mdint = 1;
 	}
 
-	dev_err(np->device, PFX "%s: MIF interrupt, "
-		"stat[%llx] phy_mdint(%d)\n",
-		np->dev->name, (unsigned long long) mif_status, phy_mdint);
+	netdev_err(np->dev, "MIF interrupt, stat[%llx] phy_mdint(%d)\n",
+		   (unsigned long long)mif_status, phy_mdint);
 
 	return -ENODEV;
 }
@@ -4081,41 +4053,40 @@ static int niu_mac_interrupt(struct niu *np)
 
 static void niu_log_device_error(struct niu *np, u64 stat)
 {
-	dev_err(np->device, PFX "%s: Core device errors ( ",
-		np->dev->name);
+	netdev_err(np->dev, "Core device errors ( ");
 
 	if (stat & SYS_ERR_MASK_META2)
-		printk("META2 ");
+		pr_cont("META2 ");
 	if (stat & SYS_ERR_MASK_META1)
-		printk("META1 ");
+		pr_cont("META1 ");
 	if (stat & SYS_ERR_MASK_PEU)
-		printk("PEU ");
+		pr_cont("PEU ");
 	if (stat & SYS_ERR_MASK_TXC)
-		printk("TXC ");
+		pr_cont("TXC ");
 	if (stat & SYS_ERR_MASK_RDMC)
-		printk("RDMC ");
+		pr_cont("RDMC ");
 	if (stat & SYS_ERR_MASK_TDMC)
-		printk("TDMC ");
+		pr_cont("TDMC ");
 	if (stat & SYS_ERR_MASK_ZCP)
-		printk("ZCP ");
+		pr_cont("ZCP ");
 	if (stat & SYS_ERR_MASK_FFLP)
-		printk("FFLP ");
+		pr_cont("FFLP ");
 	if (stat & SYS_ERR_MASK_IPP)
-		printk("IPP ");
+		pr_cont("IPP ");
 	if (stat & SYS_ERR_MASK_MAC)
-		printk("MAC ");
+		pr_cont("MAC ");
 	if (stat & SYS_ERR_MASK_SMX)
-		printk("SMX ");
+		pr_cont("SMX ");
 
-	printk(")\n");
+	pr_cont(")\n");
 }
 
 static int niu_device_error(struct niu *np)
 {
 	u64 stat = nr64(SYS_ERR_STAT);
 
-	dev_err(np->device, PFX "%s: Core device error, stat[%llx]\n",
-		np->dev->name, (unsigned long long) stat);
+	netdev_err(np->dev, "Core device error, stat[%llx]\n",
+		   (unsigned long long)stat);
 
 	niu_log_device_error(np, stat);
 
@@ -4197,8 +4168,8 @@ static void niu_rxchan_intr(struct niu *np, struct rx_ring_info *rp,
 		      RX_DMA_CTL_STAT_RCRTO);
 	nw64(RX_DMA_CTL_STAT(rp->rx_channel), stat_write);
 
-	niudbg(INTR, "%s: rxchan_intr stat[%llx]\n",
-	       np->dev->name, (unsigned long long) stat);
+	netif_printk(np, intr, KERN_DEBUG, np->dev,
+		     "%s() stat[%llx]\n", __func__, (unsigned long long)stat);
 }
 
 static void niu_txchan_intr(struct niu *np, struct tx_ring_info *rp,
@@ -4206,8 +4177,8 @@ static void niu_txchan_intr(struct niu *np, struct tx_ring_info *rp,
 {
 	rp->tx_cs = nr64(TX_CS(rp->tx_channel));
 
-	niudbg(INTR, "%s: txchan_intr cs[%llx]\n",
-	       np->dev->name, (unsigned long long) rp->tx_cs);
+	netif_printk(np, intr, KERN_DEBUG, np->dev,
+		     "%s() cs[%llx]\n", __func__, (unsigned long long)rp->tx_cs);
 }
 
 static void __niu_fastpath_interrupt(struct niu *np, int ldg, u64 v0)
@@ -4265,8 +4236,8 @@ static irqreturn_t niu_interrupt(int irq, void *dev_id)
 	u64 v0, v1, v2;
 
 	if (netif_msg_intr(np))
-		printk(KERN_DEBUG PFX "niu_interrupt() ldg[%p](%d) ",
-		       lp, ldg);
+		printk(KERN_DEBUG KBUILD_MODNAME ": " "%s() ldg[%p](%d)",
+		       __func__, lp, ldg);
 
 	spin_lock_irqsave(&np->lock, flags);
 
@@ -4275,11 +4246,13 @@ static irqreturn_t niu_interrupt(int irq, void *dev_id)
 	v2 = nr64(LDSV2(ldg));
 
 	if (netif_msg_intr(np))
-		printk("v0[%llx] v1[%llx] v2[%llx]\n",
+		pr_cont(" v0[%llx] v1[%llx] v2[%llx]",
 		       (unsigned long long) v0,
 		       (unsigned long long) v1,
 		       (unsigned long long) v2);
 
+	pr_cont("\n");
+
 	if (unlikely(!v0 && !v1 && !v2)) {
 		spin_unlock_irqrestore(&np->lock, flags);
 		return IRQ_NONE;
@@ -4400,8 +4373,8 @@ static int niu_alloc_rx_ring_info(struct niu *np,
 	if (!rp->mbox)
 		return -ENOMEM;
 	if ((unsigned long)rp->mbox & (64UL - 1)) {
-		dev_err(np->device, PFX "%s: Coherent alloc gives misaligned "
-			"RXDMA mailbox %p\n", np->dev->name, rp->mbox);
+		netdev_err(np->dev, "Coherent alloc gives misaligned RXDMA mailbox %p\n",
+			   rp->mbox);
 		return -EINVAL;
 	}
 
@@ -4411,8 +4384,8 @@ static int niu_alloc_rx_ring_info(struct niu *np,
 	if (!rp->rcr)
 		return -ENOMEM;
 	if ((unsigned long)rp->rcr & (64UL - 1)) {
-		dev_err(np->device, PFX "%s: Coherent alloc gives misaligned "
-			"RXDMA RCR table %p\n", np->dev->name, rp->rcr);
+		netdev_err(np->dev, "Coherent alloc gives misaligned RXDMA RCR table %p\n",
+			   rp->rcr);
 		return -EINVAL;
 	}
 	rp->rcr_table_size = MAX_RCR_RING_SIZE;
@@ -4424,8 +4397,8 @@ static int niu_alloc_rx_ring_info(struct niu *np,
 	if (!rp->rbr)
 		return -ENOMEM;
 	if ((unsigned long)rp->rbr & (64UL - 1)) {
-		dev_err(np->device, PFX "%s: Coherent alloc gives misaligned "
-			"RXDMA RBR table %p\n", np->dev->name, rp->rbr);
+		netdev_err(np->dev, "Coherent alloc gives misaligned RXDMA RBR table %p\n",
+			   rp->rbr);
 		return -EINVAL;
 	}
 	rp->rbr_table_size = MAX_RBR_RING_SIZE;
@@ -4458,8 +4431,8 @@ static int niu_alloc_tx_ring_info(struct niu *np,
 	if (!rp->mbox)
 		return -ENOMEM;
 	if ((unsigned long)rp->mbox & (64UL - 1)) {
-		dev_err(np->device, PFX "%s: Coherent alloc gives misaligned "
-			"TXDMA mailbox %p\n", np->dev->name, rp->mbox);
+		netdev_err(np->dev, "Coherent alloc gives misaligned TXDMA mailbox %p\n",
+			   rp->mbox);
 		return -EINVAL;
 	}
 
@@ -4469,8 +4442,8 @@ static int niu_alloc_tx_ring_info(struct niu *np,
 	if (!rp->descr)
 		return -ENOMEM;
 	if ((unsigned long)rp->descr & (64UL - 1)) {
-		dev_err(np->device, PFX "%s: Coherent alloc gives misaligned "
-			"TXDMA descr table %p\n", np->dev->name, rp->descr);
+		netdev_err(np->dev, "Coherent alloc gives misaligned TXDMA descr table %p\n",
+			   rp->descr);
 		return -EINVAL;
 	}
 
@@ -4726,10 +4699,8 @@ static int niu_init_one_tx_channel(struct niu *np, struct tx_ring_info *rp)
 
 	if (rp->descr_dma & ~(TX_RNG_CFIG_STADDR_BASE |
 			      TX_RNG_CFIG_STADDR)) {
-		dev_err(np->device, PFX "%s: TX ring channel %d "
-			"DMA addr (%llx) is not aligned.\n",
-			np->dev->name, channel,
-			(unsigned long long) rp->descr_dma);
+		netdev_err(np->dev, "TX ring channel %d DMA addr (%llx) is not aligned\n",
+			   channel, (unsigned long long)rp->descr_dma);
 		return -EINVAL;
 	}
 
@@ -4746,10 +4717,8 @@ static int niu_init_one_tx_channel(struct niu *np, struct tx_ring_info *rp)
 
 	if (((rp->mbox_dma >> 32) & ~TXDMA_MBH_MBADDR) ||
 	    ((u32)rp->mbox_dma & ~TXDMA_MBL_MBADDR)) {
-		dev_err(np->device, PFX "%s: TX ring channel %d "
-			"MBOX addr (%llx) is has illegal bits.\n",
-			np->dev->name, channel,
-			(unsigned long long) rp->mbox_dma);
+		netdev_err(np->dev, "TX ring channel %d MBOX addr (%llx) has invalid bits\n",
+			    channel, (unsigned long long)rp->mbox_dma);
 		return -EINVAL;
 	}
 	nw64(TXDMA_MBH(channel), rp->mbox_dma >> 32);
@@ -5146,9 +5115,8 @@ static int niu_zcp_read(struct niu *np, int index, u64 *data)
 	err = niu_wait_bits_clear(np, ZCP_RAM_ACC, ZCP_RAM_ACC_BUSY,
 				  1000, 100);
 	if (err) {
-		dev_err(np->device, PFX "%s: ZCP read busy won't clear, "
-			"ZCP_RAM_ACC[%llx]\n", np->dev->name,
-			(unsigned long long) nr64(ZCP_RAM_ACC));
+		netdev_err(np->dev, "ZCP read busy won't clear, ZCP_RAM_ACC[%llx]\n",
+			   (unsigned long long)nr64(ZCP_RAM_ACC));
 		return err;
 	}
 
@@ -5160,9 +5128,8 @@ static int niu_zcp_read(struct niu *np, int index, u64 *data)
 	err = niu_wait_bits_clear(np, ZCP_RAM_ACC, ZCP_RAM_ACC_BUSY,
 				  1000, 100);
 	if (err) {
-		dev_err(np->device, PFX "%s: ZCP read busy2 won't clear, "
-			"ZCP_RAM_ACC[%llx]\n", np->dev->name,
-			(unsigned long long) nr64(ZCP_RAM_ACC));
+		netdev_err(np->dev, "ZCP read busy2 won't clear, ZCP_RAM_ACC[%llx]\n",
+			   (unsigned long long)nr64(ZCP_RAM_ACC));
 		return err;
 	}
 
@@ -5527,8 +5494,7 @@ static int niu_reset_tx_bmac(struct niu *np)
 		udelay(100);
 	}
 	if (limit < 0) {
-		dev_err(np->device, PFX "Port %u TX BMAC would not reset, "
-			"BTXMAC_SW_RST[%llx]\n",
+		dev_err(np->device, "Port %u TX BMAC would not reset, BTXMAC_SW_RST[%llx]\n",
 			np->port,
 			(unsigned long long) nr64_mac(BTXMAC_SW_RST));
 		return -ENODEV;
@@ -5629,12 +5595,11 @@ static int niu_reset_rx_xmac(struct niu *np)
 	while (--limit >= 0) {
 		if (!(nr64_mac(XRXMAC_SW_RST) & (XRXMAC_SW_RST_REG_RS |
 						 XRXMAC_SW_RST_SOFT_RST)))
-		    break;
+			break;
 		udelay(100);
 	}
 	if (limit < 0) {
-		dev_err(np->device, PFX "Port %u RX XMAC would not reset, "
-			"XRXMAC_SW_RST[%llx]\n",
+		dev_err(np->device, "Port %u RX XMAC would not reset, XRXMAC_SW_RST[%llx]\n",
 			np->port,
 			(unsigned long long) nr64_mac(XRXMAC_SW_RST));
 		return -ENODEV;
@@ -5655,8 +5620,7 @@ static int niu_reset_rx_bmac(struct niu *np)
 		udelay(100);
 	}
 	if (limit < 0) {
-		dev_err(np->device, PFX "Port %u RX BMAC would not reset, "
-			"BRXMAC_SW_RST[%llx]\n",
+		dev_err(np->device, "Port %u RX BMAC would not reset, BRXMAC_SW_RST[%llx]\n",
 			np->port,
 			(unsigned long long) nr64_mac(BRXMAC_SW_RST));
 		return -ENODEV;
@@ -5960,11 +5924,9 @@ static void niu_disable_ipp(struct niu *np)
 	}
 	if (limit < 0 &&
 	    (rd != 0 && wr != 1)) {
-		dev_err(np->device, PFX "%s: IPP would not quiesce, "
-			"rd_ptr[%llx] wr_ptr[%llx]\n",
-			np->dev->name,
-			(unsigned long long) nr64_ipp(IPP_DFIFO_RD_PTR),
-			(unsigned long long) nr64_ipp(IPP_DFIFO_WR_PTR));
+		netdev_err(np->dev, "IPP would not quiesce, rd_ptr[%llx] wr_ptr[%llx]\n",
+			   (unsigned long long)nr64_ipp(IPP_DFIFO_RD_PTR),
+			   (unsigned long long)nr64_ipp(IPP_DFIFO_WR_PTR));
 	}
 
 	val = nr64_ipp(IPP_CFIG);
@@ -5981,12 +5943,12 @@ static int niu_init_hw(struct niu *np)
 {
 	int i, err;
 
-	niudbg(IFUP, "%s: Initialize TXC\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize TXC\n");
 	niu_txc_enable_port(np, 1);
 	niu_txc_port_dma_enable(np, 1);
 	niu_txc_set_imask(np, 0);
 
-	niudbg(IFUP, "%s: Initialize TX channels\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize TX channels\n");
 	for (i = 0; i < np->num_tx_rings; i++) {
 		struct tx_ring_info *rp = &np->tx_rings[i];
 
@@ -5995,27 +5957,27 @@ static int niu_init_hw(struct niu *np)
 			return err;
 	}
 
-	niudbg(IFUP, "%s: Initialize RX channels\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize RX channels\n");
 	err = niu_init_rx_channels(np);
 	if (err)
 		goto out_uninit_tx_channels;
 
-	niudbg(IFUP, "%s: Initialize classifier\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize classifier\n");
 	err = niu_init_classifier_hw(np);
 	if (err)
 		goto out_uninit_rx_channels;
 
-	niudbg(IFUP, "%s: Initialize ZCP\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize ZCP\n");
 	err = niu_init_zcp(np);
 	if (err)
 		goto out_uninit_rx_channels;
 
-	niudbg(IFUP, "%s: Initialize IPP\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize IPP\n");
 	err = niu_init_ipp(np);
 	if (err)
 		goto out_uninit_rx_channels;
 
-	niudbg(IFUP, "%s: Initialize MAC\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Initialize MAC\n");
 	err = niu_init_mac(np);
 	if (err)
 		goto out_uninit_ipp;
@@ -6023,16 +5985,16 @@ static int niu_init_hw(struct niu *np)
 	return 0;
 
 out_uninit_ipp:
-	niudbg(IFUP, "%s: Uninit IPP\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Uninit IPP\n");
 	niu_disable_ipp(np);
 
 out_uninit_rx_channels:
-	niudbg(IFUP, "%s: Uninit RX channels\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Uninit RX channels\n");
 	niu_stop_rx_channels(np);
 	niu_reset_rx_channels(np);
 
 out_uninit_tx_channels:
-	niudbg(IFUP, "%s: Uninit TX channels\n", np->dev->name);
+	netif_printk(np, ifup, KERN_DEBUG, np->dev, "Uninit TX channels\n");
 	niu_stop_tx_channels(np);
 	niu_reset_tx_channels(np);
 
@@ -6041,25 +6003,25 @@ out_uninit_tx_channels:
 
 static void niu_stop_hw(struct niu *np)
 {
-	niudbg(IFDOWN, "%s: Disable interrupts\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Disable interrupts\n");
 	niu_enable_interrupts(np, 0);
 
-	niudbg(IFDOWN, "%s: Disable RX MAC\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Disable RX MAC\n");
 	niu_enable_rx_mac(np, 0);
 
-	niudbg(IFDOWN, "%s: Disable IPP\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Disable IPP\n");
 	niu_disable_ipp(np);
 
-	niudbg(IFDOWN, "%s: Stop TX channels\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Stop TX channels\n");
 	niu_stop_tx_channels(np);
 
-	niudbg(IFDOWN, "%s: Stop RX channels\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Stop RX channels\n");
 	niu_stop_rx_channels(np);
 
-	niudbg(IFDOWN, "%s: Reset TX channels\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Reset TX channels\n");
 	niu_reset_tx_channels(np);
 
-	niudbg(IFDOWN, "%s: Reset RX channels\n", np->dev->name);
+	netif_printk(np, ifdown, KERN_DEBUG, np->dev, "Reset RX channels\n");
 	niu_reset_rx_channels(np);
 }
 
@@ -6384,14 +6346,12 @@ static void niu_set_rx_mode(struct net_device *dev)
 		netdev_for_each_uc_addr(ha, dev) {
 			err = niu_set_alt_mac(np, index, ha->addr);
 			if (err)
-				printk(KERN_WARNING PFX "%s: Error %d "
-				       "adding alt mac %d\n",
-				       dev->name, err, index);
+				netdev_warn(dev, "Error %d adding alt mac %d\n",
+					    err, index);
 			err = niu_enable_alt_mac(np, index, 1);
 			if (err)
-				printk(KERN_WARNING PFX "%s: Error %d "
-				       "enabling alt mac %d\n",
-				       dev->name, err, index);
+				netdev_warn(dev, "Error %d enabling alt mac %d\n",
+					    err, index);
 
 			index++;
 		}
@@ -6404,9 +6364,8 @@ static void niu_set_rx_mode(struct net_device *dev)
 		for (i = alt_start; i < niu_num_alt_addr(np); i++) {
 			err = niu_enable_alt_mac(np, i, 0);
 			if (err)
-				printk(KERN_WARNING PFX "%s: Error %d "
-				       "disabling alt mac %d\n",
-				       dev->name, err, i);
+				netdev_warn(dev, "Error %d disabling alt mac %d\n",
+					    err, i);
 		}
 	}
 	if (dev->flags & IFF_ALLMULTI) {
@@ -6570,7 +6529,7 @@ static void niu_tx_timeout(struct net_device *dev)
 {
 	struct niu *np = netdev_priv(dev);
 
-	dev_err(np->device, PFX "%s: Transmit timed out, resetting\n",
+	dev_err(np->device, "%s: Transmit timed out, resetting\n",
 		dev->name);
 
 	schedule_work(&np->reset_task);
@@ -6672,8 +6631,7 @@ static netdev_tx_t niu_start_xmit(struct sk_buff *skb,
 
 	if (niu_tx_avail(rp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_tx_stop_queue(txq);
-		dev_err(np->device, PFX "%s: BUG! Tx ring full when "
-			"queue awake!\n", dev->name);
+		dev_err(np->device, "%s: BUG! Tx ring full when queue awake!\n", dev->name);
 		rp->tx_errors++;
 		return NETDEV_TX_BUSY;
 	}
@@ -7237,8 +7195,8 @@ static int niu_get_ethtool_tcam_entry(struct niu *np,
 
 	tp = &parent->tcam[idx];
 	if (!tp->valid) {
-		pr_info(PFX "niu%d: %s entry [%d] invalid for idx[%d]\n",
-		parent->index, np->dev->name, (u16)nfc->fs.location, idx);
+		netdev_info(np->dev, "niu%d: entry [%d] invalid for idx[%d]\n",
+			    parent->index, (u16)nfc->fs.location, idx);
 		return -EINVAL;
 	}
 
@@ -7248,8 +7206,8 @@ static int niu_get_ethtool_tcam_entry(struct niu *np,
 	ret = niu_class_to_ethflow(class, &fsp->flow_type);
 
 	if (ret < 0) {
-		pr_info(PFX "niu%d: %s niu_class_to_ethflow failed\n",
-		parent->index, np->dev->name);
+		netdev_info(np->dev, "niu%d: niu_class_to_ethflow failed\n",
+			    parent->index);
 		ret = -EINVAL;
 		goto out;
 	}
@@ -7332,9 +7290,8 @@ static int niu_get_ethtool_tcam_all(struct niu *np,
 
 	if (n_entries != cnt) {
 		/* print warning, this should not happen */
-		pr_info(PFX "niu%d: %s In niu_get_ethtool_tcam_all, "
-			"n_entries[%d] != cnt[%d]!!!\n\n",
-			np->parent->index, np->dev->name, n_entries, cnt);
+		netdev_info(np->dev, "niu%d: In %s(): n_entries[%d] != cnt[%d]!!!\n",
+			    np->parent->index, __func__, n_entries, cnt);
 	}
 
 	return 0;
@@ -7561,9 +7518,8 @@ static int niu_add_ethtool_tcam_entry(struct niu *np,
 			}
 		}
 		if (!add_usr_cls) {
-			pr_info(PFX "niu%d: %s niu_add_ethtool_tcam_entry: "
-				"Could not find/insert class for pid %d\n",
-				parent->index, np->dev->name, uspec->proto);
+			netdev_info(np->dev, "niu%d: %s(): Could not find/insert class for pid %d\n",
+				    parent->index, __func__, uspec->proto);
 			ret = -EINVAL;
 			goto out;
 		}
@@ -7596,9 +7552,8 @@ static int niu_add_ethtool_tcam_entry(struct niu *np,
 	case AH_V6_FLOW:
 	case ESP_V6_FLOW:
 		/* Not yet implemented */
-		pr_info(PFX "niu%d: %s In niu_add_ethtool_tcam_entry: "
-			"flow %d for IPv6 not implemented\n\n",
-			parent->index, np->dev->name, fsp->flow_type);
+		netdev_info(np->dev, "niu%d: In %s(): flow %d for IPv6 not implemented\n",
+			    parent->index, __func__, fsp->flow_type);
 		ret = -EINVAL;
 		goto out;
 	case IP_USER_FLOW:
@@ -7607,17 +7562,15 @@ static int niu_add_ethtool_tcam_entry(struct niu *np,
 						   class);
 		} else {
 			/* Not yet implemented */
-			pr_info(PFX "niu%d: %s In niu_add_ethtool_tcam_entry: "
-			"usr flow for IPv6 not implemented\n\n",
-			parent->index, np->dev->name);
+			netdev_info(np->dev, "niu%d: In %s(): usr flow for IPv6 not implemented\n",
+				    parent->index, __func__);
 			ret = -EINVAL;
 			goto out;
 		}
 		break;
 	default:
-		pr_info(PFX "niu%d: %s In niu_add_ethtool_tcam_entry: "
-			"Unknown flow type %d\n\n",
-			parent->index, np->dev->name, fsp->flow_type);
+		netdev_info(np->dev, "niu%d: In %s(): Unknown flow type %d\n",
+			    parent->index, __func__, fsp->flow_type);
 		ret = -EINVAL;
 		goto out;
 	}
@@ -7627,10 +7580,9 @@ static int niu_add_ethtool_tcam_entry(struct niu *np,
 		tp->assoc_data = TCAM_ASSOCDATA_DISC;
 	} else {
 		if (fsp->ring_cookie >= np->num_rx_rings) {
-			pr_info(PFX "niu%d: %s In niu_add_ethtool_tcam_entry: "
-				"Invalid RX ring %lld\n\n",
-				parent->index, np->dev->name,
-				(long long) fsp->ring_cookie);
+			netdev_info(np->dev, "niu%d: In %s(): Invalid RX ring %lld\n",
+				    parent->index, __func__,
+				    (long long)fsp->ring_cookie);
 			ret = -EINVAL;
 			goto out;
 		}
@@ -7699,10 +7651,9 @@ static int niu_del_ethtool_tcam_entry(struct niu *np, u32 loc)
 			}
 		}
 		if (i == NIU_L3_PROG_CLS) {
-			pr_info(PFX "niu%d: %s In niu_del_ethtool_tcam_entry,"
-				"Usr class 0x%llx not found \n",
-				parent->index, np->dev->name,
-				(unsigned long long) class);
+			netdev_info(np->dev, "niu%d: In %s(): Usr class 0x%llx not found\n",
+				    parent->index, __func__,
+				    (unsigned long long)class);
 			ret = -EINVAL;
 			goto out;
 		}
@@ -8001,9 +7952,7 @@ static int niu_ldg_assign_ldn(struct niu *np, struct niu_parent *parent,
 		 * won't get any interrupts and that's painful to debug.
 		 */
 		if (nr64(LDG_NUM(ldn)) != ldg) {
-			dev_err(np->device, PFX "Port %u, mis-matched "
-				"LDG assignment "
-				"for ldn %d, should be %d is %llu\n",
+			dev_err(np->device, "Port %u, mis-matched LDG assignment for ldn %d, should be %d is %llu\n",
 				np->port, ldn, ldg,
 				(unsigned long long) nr64(LDG_NUM(ldn)));
 			return -EINVAL;
@@ -8056,7 +8005,7 @@ static int __devinit niu_pci_eeprom_read(struct niu *np, u32 addr)
 			break;
 	} while (limit--);
 	if (!(frame & ESPC_PIO_STAT_READ_END)) {
-		dev_err(np->device, PFX "EEPROM read timeout frame[%llx]\n",
+		dev_err(np->device, "EEPROM read timeout frame[%llx]\n",
 			(unsigned long long) frame);
 		return -ENODEV;
 	}
@@ -8071,7 +8020,7 @@ static int __devinit niu_pci_eeprom_read(struct niu *np, u32 addr)
 			break;
 	} while (limit--);
 	if (!(frame & ESPC_PIO_STAT_READ_END)) {
-		dev_err(np->device, PFX "EEPROM read timeout frame[%llx]\n",
+		dev_err(np->device, "EEPROM read timeout frame[%llx]\n",
 			(unsigned long long) frame);
 		return -ENODEV;
 	}
@@ -8152,8 +8101,9 @@ static void __devinit niu_vpd_parse_version(struct niu *np)
 	s += i + 5;
 	sscanf(s, "%d.%d", &vpd->fcode_major, &vpd->fcode_minor);
 
-	niudbg(PROBE, "VPD_SCAN: FCODE major(%d) minor(%d)\n",
-	       vpd->fcode_major, vpd->fcode_minor);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "VPD_SCAN: FCODE major(%d) minor(%d)\n",
+		     vpd->fcode_major, vpd->fcode_minor);
 	if (vpd->fcode_major > NIU_VPD_MIN_MAJOR ||
 	    (vpd->fcode_major == NIU_VPD_MIN_MAJOR &&
 	     vpd->fcode_minor >= NIU_VPD_MIN_MINOR))
@@ -8173,8 +8123,8 @@ static int __devinit niu_pci_vpd_scan_props(struct niu *np,
 #define FOUND_MASK_PHY		0x00000020
 #define FOUND_MASK_ALL		0x0000003f
 
-	niudbg(PROBE, "VPD_SCAN: start[%x] end[%x]\n",
-	       start, end);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "VPD_SCAN: start[%x] end[%x]\n", start, end);
 	while (start < end) {
 		int len, err, instance, type, prop_len;
 		char namebuf[64];
@@ -8228,8 +8178,7 @@ static int __devinit niu_pci_vpd_scan_props(struct niu *np,
 		}
 
 		if (max_len && prop_len > max_len) {
-			dev_err(np->device, PFX "Property '%s' length (%d) is "
-				"too long.\n", namebuf, prop_len);
+			dev_err(np->device, "Property '%s' length (%d) is too long\n", namebuf, prop_len);
 			return -EINVAL;
 		}
 
@@ -8237,8 +8186,9 @@ static int __devinit niu_pci_vpd_scan_props(struct niu *np,
 			u32 off = start + 5 + err;
 			int i;
 
-			niudbg(PROBE, "VPD_SCAN: Reading in property [%s] "
-			       "len[%d]\n", namebuf, prop_len);
+			netif_printk(np, probe, KERN_DEBUG, np->dev,
+				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
+				     namebuf, prop_len);
 			for (i = 0; i < prop_len; i++)
 				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
 		}
@@ -8402,8 +8352,7 @@ static void __devinit niu_pci_vpd_validate(struct niu *np)
 	u8 val8;
 
 	if (!is_valid_ether_addr(&vpd->local_mac[0])) {
-		dev_err(np->device, PFX "VPD MAC invalid, "
-			"falling back to SPROM.\n");
+		dev_err(np->device, "VPD MAC invalid, falling back to SPROM\n");
 
 		np->flags &= ~NIU_FLAGS_VPD_VALID;
 		return;
@@ -8420,14 +8369,14 @@ static void __devinit niu_pci_vpd_validate(struct niu *np)
 			np->flags &= ~NIU_FLAGS_10G;
 		}
 		if (np->flags & NIU_FLAGS_10G)
-			 np->mac_xcvr = MAC_XCVR_XPCS;
+			np->mac_xcvr = MAC_XCVR_XPCS;
 	} else if (!strcmp(np->vpd.model, NIU_FOXXY_MDL_STR)) {
 		np->flags |= (NIU_FLAGS_10G | NIU_FLAGS_FIBER |
 			      NIU_FLAGS_HOTPLUG_PHY);
 	} else if (niu_phy_type_prop_decode(np, np->vpd.phy_type)) {
-		dev_err(np->device, PFX "Illegal phy string [%s].\n",
+		dev_err(np->device, "Illegal phy string [%s]\n",
 			np->vpd.phy_type);
-		dev_err(np->device, PFX "Falling back to SPROM.\n");
+		dev_err(np->device, "Falling back to SPROM\n");
 		np->flags &= ~NIU_FLAGS_VPD_VALID;
 		return;
 	}
@@ -8455,7 +8404,8 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 
 	np->eeprom_len = len;
 
-	niudbg(PROBE, "SPROM: Image size %llu\n", (unsigned long long) val);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: Image size %llu\n", (unsigned long long)val);
 
 	sum = 0;
 	for (i = 0; i < len; i++) {
@@ -8465,10 +8415,10 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 		sum += (val >> 16) & 0xff;
 		sum += (val >> 24) & 0xff;
 	}
-	niudbg(PROBE, "SPROM: Checksum %x\n", (int)(sum & 0xff));
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: Checksum %x\n", (int)(sum & 0xff));
 	if ((sum & 0xff) != 0xab) {
-		dev_err(np->device, PFX "Bad SPROM checksum "
-			"(%x, should be 0xab)\n", (int) (sum & 0xff));
+		dev_err(np->device, "Bad SPROM checksum (%x, should be 0xab)\n", (int)(sum & 0xff));
 		return -EINVAL;
 	}
 
@@ -8491,11 +8441,12 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 			ESPC_PHY_TYPE_PORT3_SHIFT;
 		break;
 	default:
-		dev_err(np->device, PFX "Bogus port number %u\n",
+		dev_err(np->device, "Bogus port number %u\n",
 			np->port);
 		return -EINVAL;
 	}
-	niudbg(PROBE, "SPROM: PHY type %x\n", val8);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: PHY type %x\n", val8);
 
 	switch (val8) {
 	case ESPC_PHY_TYPE_1G_COPPER:
@@ -8527,30 +8478,27 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 		break;
 
 	default:
-		dev_err(np->device, PFX "Bogus SPROM phy type %u\n", val8);
+		dev_err(np->device, "Bogus SPROM phy type %u\n", val8);
 		return -EINVAL;
 	}
 
 	val = nr64(ESPC_MAC_ADDR0);
-	niudbg(PROBE, "SPROM: MAC_ADDR0[%08llx]\n",
-	       (unsigned long long) val);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: MAC_ADDR0[%08llx]\n", (unsigned long long)val);
 	dev->perm_addr[0] = (val >>  0) & 0xff;
 	dev->perm_addr[1] = (val >>  8) & 0xff;
 	dev->perm_addr[2] = (val >> 16) & 0xff;
 	dev->perm_addr[3] = (val >> 24) & 0xff;
 
 	val = nr64(ESPC_MAC_ADDR1);
-	niudbg(PROBE, "SPROM: MAC_ADDR1[%08llx]\n",
-	       (unsigned long long) val);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: MAC_ADDR1[%08llx]\n", (unsigned long long)val);
 	dev->perm_addr[4] = (val >>  0) & 0xff;
 	dev->perm_addr[5] = (val >>  8) & 0xff;
 
 	if (!is_valid_ether_addr(&dev->perm_addr[0])) {
-		dev_err(np->device, PFX "SPROM MAC address invalid\n");
-		dev_err(np->device, PFX "[ \n");
-		for (i = 0; i < 6; i++)
-			printk("%02x ", dev->perm_addr[i]);
-		printk("]\n");
+		dev_err(np->device, "SPROM MAC address invalid [ %pM ]\n",
+			dev->perm_addr);
 		return -EINVAL;
 	}
 
@@ -8562,8 +8510,8 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 	memcpy(dev->dev_addr, dev->perm_addr, dev->addr_len);
 
 	val = nr64(ESPC_MOD_STR_LEN);
-	niudbg(PROBE, "SPROM: MOD_STR_LEN[%llu]\n",
-	       (unsigned long long) val);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: MOD_STR_LEN[%llu]\n", (unsigned long long)val);
 	if (val >= 8 * 4)
 		return -EINVAL;
 
@@ -8578,8 +8526,8 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 	np->vpd.model[val] = '\0';
 
 	val = nr64(ESPC_BD_MOD_STR_LEN);
-	niudbg(PROBE, "SPROM: BD_MOD_STR_LEN[%llu]\n",
-	       (unsigned long long) val);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: BD_MOD_STR_LEN[%llu]\n", (unsigned long long)val);
 	if (val >= 4 * 4)
 		return -EINVAL;
 
@@ -8595,8 +8543,8 @@ static int __devinit niu_pci_probe_sprom(struct niu *np)
 
 	np->vpd.mac_num =
 		nr64(ESPC_NUM_PORTS_MACS) & ESPC_NUM_PORTS_MACS_VAL;
-	niudbg(PROBE, "SPROM: NUM_PORTS_MACS[%d]\n",
-	       np->vpd.mac_num);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "SPROM: NUM_PORTS_MACS[%d]\n", np->vpd.mac_num);
 
 	return 0;
 }
@@ -8629,8 +8577,9 @@ static int __devinit niu_get_and_validate_port(struct niu *np)
 		}
 	}
 
-	niudbg(PROBE, "niu_get_and_validate_port: port[%d] num_ports[%d]\n",
-	       np->port, parent->num_ports);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "%s() port[%d] num_ports[%d]\n",
+		     __func__, np->port, parent->num_ports);
 	if (np->port >= parent->num_ports)
 		return -ENODEV;
 
@@ -8659,14 +8608,12 @@ static int __devinit phy_record(struct niu_parent *parent,
 
 	pr_info("niu%d: Found PHY %08x type %s at phy_port %u\n",
 		parent->index, id,
-		(type == PHY_TYPE_PMA_PMD ?
-		 "PMA/PMD" :
-		 (type == PHY_TYPE_PCS ?
-		  "PCS" : "MII")),
+		type == PHY_TYPE_PMA_PMD ? "PMA/PMD" :
+		type == PHY_TYPE_PCS ? "PCS" : "MII",
 		phy_port);
 
 	if (p->cur[type] >= NIU_MAX_PORTS) {
-		printk(KERN_ERR PFX "Too many PHY ports.\n");
+		pr_err("Too many PHY ports\n");
 		return -EINVAL;
 	}
 	idx = p->cur[type];
@@ -8727,8 +8674,7 @@ static void __devinit niu_n2_divide_channels(struct niu_parent *parent)
 		parent->rxchan_per_port[i] = (16 / num_ports);
 		parent->txchan_per_port[i] = (16 / num_ports);
 
-		pr_info(PFX "niu%d: Port %u [%u RX chans] "
-			"[%u TX chans]\n",
+		pr_info("niu%d: Port %u [%u RX chans] [%u TX chans]\n",
 			parent->index, i,
 			parent->rxchan_per_port[i],
 			parent->txchan_per_port[i]);
@@ -8771,8 +8717,7 @@ static void __devinit niu_divide_channels(struct niu_parent *parent,
 			parent->rxchan_per_port[i] = rx_chans_per_1g;
 			parent->txchan_per_port[i] = tx_chans_per_1g;
 		}
-		pr_info(PFX "niu%d: Port %u [%u RX chans] "
-			"[%u TX chans]\n",
+		pr_info("niu%d: Port %u [%u RX chans] [%u TX chans]\n",
 			parent->index, i,
 			parent->rxchan_per_port[i],
 			parent->txchan_per_port[i]);
@@ -8781,23 +8726,20 @@ static void __devinit niu_divide_channels(struct niu_parent *parent,
 	}
 
 	if (tot_rx > NIU_NUM_RXCHAN) {
-		printk(KERN_ERR PFX "niu%d: Too many RX channels (%d), "
-		       "resetting to one per port.\n",
+		pr_err("niu%d: Too many RX channels (%d), resetting to one per port\n",
 		       parent->index, tot_rx);
 		for (i = 0; i < num_ports; i++)
 			parent->rxchan_per_port[i] = 1;
 	}
 	if (tot_tx > NIU_NUM_TXCHAN) {
-		printk(KERN_ERR PFX "niu%d: Too many TX channels (%d), "
-		       "resetting to one per port.\n",
+		pr_err("niu%d: Too many TX channels (%d), resetting to one per port\n",
 		       parent->index, tot_tx);
 		for (i = 0; i < num_ports; i++)
 			parent->txchan_per_port[i] = 1;
 	}
 	if (tot_rx < NIU_NUM_RXCHAN || tot_tx < NIU_NUM_TXCHAN) {
-		printk(KERN_WARNING PFX "niu%d: Driver bug, wasted channels, "
-		       "RX[%d] TX[%d]\n",
-		       parent->index, tot_rx, tot_tx);
+		pr_warning("niu%d: Driver bug, wasted channels, RX[%d] TX[%d]\n",
+			   parent->index, tot_rx, tot_tx);
 	}
 }
 
@@ -8825,18 +8767,18 @@ static void __devinit niu_divide_rdc_groups(struct niu_parent *parent,
 			struct rdc_table *rt = &tp->tables[grp];
 			int slot;
 
-			pr_info(PFX "niu%d: Port %d RDC tbl(%d) [ ",
+			pr_info("niu%d: Port %d RDC tbl(%d) [ ",
 				parent->index, i, tp->first_table_num + grp);
 			for (slot = 0; slot < NIU_RDC_TABLE_SLOTS; slot++) {
 				rt->rxdma_channel[slot] =
 					rdc_channel_base + this_channel_offset;
 
-				printk("%d ", rt->rxdma_channel[slot]);
+				pr_cont("%d ", rt->rxdma_channel[slot]);
 
 				if (++this_channel_offset == num_channels)
 					this_channel_offset = 0;
 			}
-			printk("]\n");
+			pr_cont("]\n");
 		}
 
 		parent->rdc_default[i] = rdc_channel_base;
@@ -8996,8 +8938,7 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
 			break;
 
 		default:
-			printk(KERN_ERR PFX "Unsupported port config "
-			       "10G[%d] 1G[%d]\n",
+			pr_err("Unsupported port config 10G[%d] 1G[%d]\n",
 			       num_10g, num_1g);
 			return -EINVAL;
 		}
@@ -9015,8 +8956,7 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
 	return 0;
 
 unknown_vg_1g_port:
-	printk(KERN_ERR PFX "Cannot identify platform type, 1gport=%d\n",
-	       lowest_1g);
+	pr_err("Cannot identify platform type, 1gport=%d\n", lowest_1g);
 	return -EINVAL;
 }
 
@@ -9025,8 +8965,8 @@ static int __devinit niu_probe_ports(struct niu *np)
 	struct niu_parent *parent = np->parent;
 	int err, i;
 
-	niudbg(PROBE, "niu_probe_ports(): port_phy[%08x]\n",
-	       parent->port_phy);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "%s() port_phy[%08x]\n", __func__, parent->port_phy);
 
 	if (parent->port_phy == PORT_PHY_UNKNOWN) {
 		err = walk_phys(np, parent);
@@ -9048,8 +8988,9 @@ static int __devinit niu_classifier_swstate_init(struct niu *np)
 {
 	struct niu_classifier *cp = &np->clas;
 
-	niudbg(PROBE, "niu_classifier_swstate_init: num_tcam(%d)\n",
-	       np->parent->tcam_num_entries);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "%s() num_tcam(%d)\n",
+		     __func__, np->parent->tcam_num_entries);
 
 	cp->tcam_top = (u16) np->port;
 	cp->tcam_sz = np->parent->tcam_num_entries / np->parent->num_ports;
@@ -9116,8 +9057,7 @@ static int __devinit niu_init_mac_ipp_pcs_base(struct niu *np)
 		break;
 
 	default:
-		dev_err(np->device, PFX "Port %u is invalid, cannot "
-			"compute MAC block offset.\n", np->port);
+		dev_err(np->device, "Port %u is invalid, cannot compute MAC block offset\n", np->port);
 		return -EINVAL;
 	}
 
@@ -9327,9 +9267,8 @@ static int __devinit niu_get_of_props(struct niu *np)
 
 	phy_type = of_get_property(dp, "phy-type", &prop_len);
 	if (!phy_type) {
-		dev_err(np->device, PFX "%s: OF node lacks "
-			"phy-type property\n",
-			dp->full_name);
+		netdev_err(dev, "%s: OF node lacks phy-type property\n",
+			   dp->full_name);
 		return -EINVAL;
 	}
 
@@ -9339,34 +9278,26 @@ static int __devinit niu_get_of_props(struct niu *np)
 	strcpy(np->vpd.phy_type, phy_type);
 
 	if (niu_phy_type_prop_decode(np, np->vpd.phy_type)) {
-		dev_err(np->device, PFX "%s: Illegal phy string [%s].\n",
-			dp->full_name, np->vpd.phy_type);
+		netdev_err(dev, "%s: Illegal phy string [%s]\n",
+			   dp->full_name, np->vpd.phy_type);
 		return -EINVAL;
 	}
 
 	mac_addr = of_get_property(dp, "local-mac-address", &prop_len);
 	if (!mac_addr) {
-		dev_err(np->device, PFX "%s: OF node lacks "
-			"local-mac-address property\n",
-			dp->full_name);
+		netdev_err(dev, "%s: OF node lacks local-mac-address property\n",
+			   dp->full_name);
 		return -EINVAL;
 	}
 	if (prop_len != dev->addr_len) {
-		dev_err(np->device, PFX "%s: OF MAC address prop len (%d) "
-			"is wrong.\n",
-			dp->full_name, prop_len);
+		netdev_err(dev, "%s: OF MAC address prop len (%d) is wrong\n",
+			   dp->full_name, prop_len);
 	}
 	memcpy(dev->perm_addr, mac_addr, dev->addr_len);
 	if (!is_valid_ether_addr(&dev->perm_addr[0])) {
-		int i;
-
-		dev_err(np->device, PFX "%s: OF MAC address is invalid\n",
-			dp->full_name);
-		dev_err(np->device, PFX "%s: [ \n",
-			dp->full_name);
-		for (i = 0; i < 6; i++)
-			printk("%02x ", dev->perm_addr[i]);
-		printk("]\n");
+		netdev_err(dev, "%s: OF MAC address is invalid\n",
+			   dp->full_name);
+		netdev_err(dev, "%s: [ %pM ]\n", dp->full_name, dev->perm_addr);
 		return -EINVAL;
 	}
 
@@ -9414,8 +9345,8 @@ static int __devinit niu_get_invariants(struct niu *np)
 
 		nw64(ESPC_PIO_EN, ESPC_PIO_EN_ENABLE);
 		offset = niu_pci_vpd_offset(np);
-		niudbg(PROBE, "niu_get_invariants: VPD offset [%08x]\n",
-		       offset);
+		netif_printk(np, probe, KERN_DEBUG, np->dev,
+			     "%s() VPD offset [%08x]\n", __func__, offset);
 		if (offset)
 			niu_pci_vpd_fetch(np, offset);
 		nw64(ESPC_PIO_EN, 0);
@@ -9575,7 +9506,8 @@ static struct niu_parent * __devinit niu_new_parent(struct niu *np,
 	struct niu_parent *p;
 	int i;
 
-	niudbg(PROBE, "niu_new_parent: Creating new parent.\n");
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "%s() Creating new parent\n", __func__);
 
 	plat_dev = platform_device_register_simple("niu", niu_parent_index,
 						   NULL, 0);
@@ -9641,8 +9573,9 @@ static struct niu_parent * __devinit niu_get_parent(struct niu *np,
 	struct niu_parent *p, *tmp;
 	int port = np->port;
 
-	niudbg(PROBE, "niu_get_parent: platform_type[%u] port[%u]\n",
-	       ptype, port);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "%s() platform_type[%u] port[%u]\n",
+		     __func__, ptype, port);
 
 	mutex_lock(&niu_parent_lock);
 	p = NULL;
@@ -9681,7 +9614,8 @@ static void niu_put_parent(struct niu *np)
 
 	BUG_ON(!p || p->ports[port] != np);
 
-	niudbg(PROBE, "niu_put_parent: port[%u]\n", port);
+	netif_printk(np, probe, KERN_DEBUG, np->dev,
+		     "%s() port[%u]\n", __func__, port);
 
 	sprintf(port_name, "port%d", port);
 
@@ -9772,7 +9706,7 @@ static struct net_device * __devinit niu_alloc_and_init(
 
 	dev = alloc_etherdev_mq(sizeof(struct niu), NIU_NUM_TXCHAN);
 	if (!dev) {
-		dev_err(gen_dev, PFX "Etherdev alloc failed, aborting.\n");
+		dev_err(gen_dev, "Etherdev alloc failed, aborting\n");
 		return NULL;
 	}
 
@@ -9858,30 +9792,26 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev,
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		dev_err(&pdev->dev, PFX "Cannot enable PCI device, "
-			"aborting.\n");
+		dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
 		return err;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
 	    !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
-		dev_err(&pdev->dev, PFX "Cannot find proper PCI device "
-			"base addresses, aborting.\n");
+		dev_err(&pdev->dev, "Cannot find proper PCI device base addresses, aborting\n");
 		err = -ENODEV;
 		goto err_out_disable_pdev;
 	}
 
 	err = pci_request_regions(pdev, DRV_MODULE_NAME);
 	if (err) {
-		dev_err(&pdev->dev, PFX "Cannot obtain PCI resources, "
-			"aborting.\n");
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
 		goto err_out_disable_pdev;
 	}
 
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (pos <= 0) {
-		dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, "
-			"aborting.\n");
+		dev_err(&pdev->dev, "Cannot find PCI Express capability, aborting\n");
 		goto err_out_free_res;
 	}
 
@@ -9920,17 +9850,14 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev,
 		dev->features |= NETIF_F_HIGHDMA;
 		err = pci_set_consistent_dma_mask(pdev, dma_mask);
 		if (err) {
-			dev_err(&pdev->dev, PFX "Unable to obtain 44 bit "
-				"DMA for consistent allocations, "
-				"aborting.\n");
+			dev_err(&pdev->dev, "Unable to obtain 44 bit DMA for consistent allocations, aborting\n");
 			goto err_out_release_parent;
 		}
 	}
 	if (err || dma_mask == DMA_BIT_MASK(32)) {
 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
-			dev_err(&pdev->dev, PFX "No usable DMA configuration, "
-				"aborting.\n");
+			dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
 			goto err_out_release_parent;
 		}
 	}
@@ -9939,8 +9866,7 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev,
 
 	np->regs = pci_ioremap_bar(pdev, 0);
 	if (!np->regs) {
-		dev_err(&pdev->dev, PFX "Cannot map device registers, "
-			"aborting.\n");
+		dev_err(&pdev->dev, "Cannot map device registers, aborting\n");
 		err = -ENOMEM;
 		goto err_out_release_parent;
 	}
@@ -9955,15 +9881,13 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev,
 	err = niu_get_invariants(np);
 	if (err) {
 		if (err != -ENODEV)
-			dev_err(&pdev->dev, PFX "Problem fetching invariants "
-				"of chip, aborting.\n");
+			dev_err(&pdev->dev, "Problem fetching invariants of chip, aborting\n");
 		goto err_out_iounmap;
 	}
 
 	err = register_netdev(dev);
 	if (err) {
-		dev_err(&pdev->dev, PFX "Cannot register net device, "
-			"aborting.\n");
+		dev_err(&pdev->dev, "Cannot register net device, aborting\n");
 		goto err_out_iounmap;
 	}
 
@@ -10157,7 +10081,7 @@ static int __devinit niu_of_probe(struct of_device *op,
 
 	reg = of_get_property(op->node, "reg", NULL);
 	if (!reg) {
-		dev_err(&op->dev, PFX "%s: No 'reg' property, aborting.\n",
+		dev_err(&op->dev, "%s: No 'reg' property, aborting\n",
 			op->node->full_name);
 		return -ENODEV;
 	}
@@ -10186,8 +10110,7 @@ static int __devinit niu_of_probe(struct of_device *op,
 			      resource_size(&op->resource[1]),
 			      "niu regs");
 	if (!np->regs) {
-		dev_err(&op->dev, PFX "Cannot map device registers, "
-			"aborting.\n");
+		dev_err(&op->dev, "Cannot map device registers, aborting\n");
 		err = -ENOMEM;
 		goto err_out_release_parent;
 	}
@@ -10196,8 +10119,7 @@ static int __devinit niu_of_probe(struct of_device *op,
 				    resource_size(&op->resource[2]),
 				    "niu vregs-1");
 	if (!np->vir_regs_1) {
-		dev_err(&op->dev, PFX "Cannot map device vir registers 1, "
-			"aborting.\n");
+		dev_err(&op->dev, "Cannot map device vir registers 1, aborting\n");
 		err = -ENOMEM;
 		goto err_out_iounmap;
 	}
@@ -10206,8 +10128,7 @@ static int __devinit niu_of_probe(struct of_device *op,
 				    resource_size(&op->resource[3]),
 				    "niu vregs-2");
 	if (!np->vir_regs_2) {
-		dev_err(&op->dev, PFX "Cannot map device vir registers 2, "
-			"aborting.\n");
+		dev_err(&op->dev, "Cannot map device vir registers 2, aborting\n");
 		err = -ENOMEM;
 		goto err_out_iounmap;
 	}
@@ -10217,15 +10138,13 @@ static int __devinit niu_of_probe(struct of_device *op,
 	err = niu_get_invariants(np);
 	if (err) {
 		if (err != -ENODEV)
-			dev_err(&op->dev, PFX "Problem fetching invariants "
-				"of chip, aborting.\n");
+			dev_err(&op->dev, "Problem fetching invariants of chip, aborting\n");
 		goto err_out_iounmap;
 	}
 
 	err = register_netdev(dev);
 	if (err) {
-		dev_err(&op->dev, PFX "Cannot register net device, "
-			"aborting.\n");
+		dev_err(&op->dev, "Cannot register net device, aborting\n");
 		goto err_out_iounmap;
 	}
 
-- 
cgit v1.2.3


From 02b1bae5e1c0f810168037be0134685085e95e88 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 15 Feb 2010 00:07:00 -0800
Subject: niu: Refinements to kernel logging.

Fix unconditional empty kerne log message every interrupt.

Kill some informational log messages that are superfluous
and anyways occur before the netdev is registered.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/niu.c | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 347788f11c74..5e604e305d95 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -3204,9 +3204,6 @@ static int fflp_early_init(struct niu *np)
 	parent = np->parent;
 	err = 0;
 	if (!(parent->flags & PARENT_FLGS_CLS_HWINIT)) {
-		netif_printk(np, probe, KERN_DEBUG, np->dev,
-			     "%s() Initting hw on port %u\n",
-			     __func__, np->port);
 		if (np->parent->plat_type != PLAT_TYPE_NIU) {
 			fflp_reset(np);
 			fflp_set_timings(np);
@@ -3248,8 +3245,6 @@ static int fflp_early_init(struct niu *np)
 
 		vlan_tbl_clear(np);
 
-		netif_printk(np, probe, KERN_DEBUG, np->dev,
-			     "%s() Success\n", __func__);
 		parent->flags |= PARENT_FLGS_CLS_HWINIT;
 	}
 out:
@@ -4246,13 +4241,11 @@ static irqreturn_t niu_interrupt(int irq, void *dev_id)
 	v2 = nr64(LDSV2(ldg));
 
 	if (netif_msg_intr(np))
-		pr_cont(" v0[%llx] v1[%llx] v2[%llx]",
+		pr_cont(" v0[%llx] v1[%llx] v2[%llx]\n",
 		       (unsigned long long) v0,
 		       (unsigned long long) v1,
 		       (unsigned long long) v2);
 
-	pr_cont("\n");
-
 	if (unlikely(!v0 && !v1 && !v2)) {
 		spin_unlock_irqrestore(&np->lock, flags);
 		return IRQ_NONE;
@@ -8577,9 +8570,6 @@ static int __devinit niu_get_and_validate_port(struct niu *np)
 		}
 	}
 
-	netif_printk(np, probe, KERN_DEBUG, np->dev,
-		     "%s() port[%d] num_ports[%d]\n",
-		     __func__, np->port, parent->num_ports);
 	if (np->port >= parent->num_ports)
 		return -ENODEV;
 
@@ -8965,9 +8955,6 @@ static int __devinit niu_probe_ports(struct niu *np)
 	struct niu_parent *parent = np->parent;
 	int err, i;
 
-	netif_printk(np, probe, KERN_DEBUG, np->dev,
-		     "%s() port_phy[%08x]\n", __func__, parent->port_phy);
-
 	if (parent->port_phy == PORT_PHY_UNKNOWN) {
 		err = walk_phys(np, parent);
 		if (err)
@@ -8988,10 +8975,6 @@ static int __devinit niu_classifier_swstate_init(struct niu *np)
 {
 	struct niu_classifier *cp = &np->clas;
 
-	netif_printk(np, probe, KERN_DEBUG, np->dev,
-		     "%s() num_tcam(%d)\n",
-		     __func__, np->parent->tcam_num_entries);
-
 	cp->tcam_top = (u16) np->port;
 	cp->tcam_sz = np->parent->tcam_num_entries / np->parent->num_ports;
 	cp->h1_init = 0xffffffff;
@@ -9506,9 +9489,6 @@ static struct niu_parent * __devinit niu_new_parent(struct niu *np,
 	struct niu_parent *p;
 	int i;
 
-	netif_printk(np, probe, KERN_DEBUG, np->dev,
-		     "%s() Creating new parent\n", __func__);
-
 	plat_dev = platform_device_register_simple("niu", niu_parent_index,
 						   NULL, 0);
 	if (IS_ERR(plat_dev))
@@ -9573,10 +9553,6 @@ static struct niu_parent * __devinit niu_get_parent(struct niu *np,
 	struct niu_parent *p, *tmp;
 	int port = np->port;
 
-	netif_printk(np, probe, KERN_DEBUG, np->dev,
-		     "%s() platform_type[%u] port[%u]\n",
-		     __func__, ptype, port);
-
 	mutex_lock(&niu_parent_lock);
 	p = NULL;
 	list_for_each_entry(tmp, &niu_parent_list, list) {
-- 
cgit v1.2.3


From 088ef950dc0dd58d2f339e1616c9092fea923f06 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 12 Feb 2010 12:26:47 -0800
Subject: omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2

Convert ARCH_OMAP24XX to ARCH_OMAP2

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig                | 16 ++++-----
 arch/arm/mach-omap2/Makefile               |  2 +-
 arch/arm/mach-omap2/clock.h                |  2 +-
 arch/arm/mach-omap2/clockdomains.h         |  2 +-
 arch/arm/mach-omap2/io.c                   |  2 +-
 arch/arm/mach-omap2/mux.c                  |  2 +-
 arch/arm/mach-omap2/powerdomains24xx.h     |  4 +--
 arch/arm/plat-omap/Kconfig                 |  4 +--
 arch/arm/plat-omap/devices.c               |  2 +-
 arch/arm/plat-omap/gpio.c                  | 56 +++++++++++++++---------------
 arch/arm/plat-omap/i2c.c                   |  4 +--
 arch/arm/plat-omap/include/plat/cpu.h      |  8 ++---
 arch/arm/plat-omap/include/plat/mcbsp.h    |  2 +-
 arch/arm/plat-omap/include/plat/menelaus.h |  2 +-
 arch/arm/plat-omap/include/plat/mux.h      |  2 +-
 arch/arm/plat-omap/include/plat/omap24xx.h |  6 ++--
 arch/arm/plat-omap/sram.c                  |  2 +-
 drivers/char/hw_random/Kconfig             |  2 +-
 drivers/mfd/Kconfig                        |  2 +-
 drivers/net/smc911x.h                      |  2 +-
 drivers/spi/Kconfig                        |  2 +-
 drivers/watchdog/Kconfig                   |  2 +-
 sound/soc/omap/omap-mcbsp.c                |  2 +-
 23 files changed, 63 insertions(+), 67 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 606bf04f51b6..69a6b2baabfe 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,19 +1,15 @@
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP24XX
-	bool "OMAP24xx Based System"
-	depends on ARCH_OMAP2
-
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
-	depends on ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
-	depends on ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config ARCH_OMAP34XX
 	bool "OMAP34xx Based System"
@@ -42,7 +38,7 @@ comment "OMAP Board Type"
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -51,16 +47,16 @@ config MACH_OMAP2_TUSB6010
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f6f151c4f089..492cf164e000 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a6e85f46a65c..fcb99cce5fc8 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -129,7 +129,7 @@ extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_CPU_FREQ)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
 extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
 extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #else
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 7db6298493fd..8fc19ff2cd89 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -84,7 +84,7 @@ static struct clkdm_dep gfx_sgx_wkdeps[] = {
 
 /* 24XX-specific possible dependencies */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 
 /* Wakeup dependency source arrays */
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 31296cbecb0b..103fc0915fb9 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,7 +55,7 @@
  * default mapping provided here.
  */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 5fedc50c58e4..fa7c8dad35ef 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -75,7 +75,7 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
 	}
 }
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
 
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
index 652a01b729e9..775093add9b6 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -30,7 +30,7 @@
 
 /* 24XX powerdomains and dependencies */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 
 /* Powerdomains */
 
@@ -82,7 +82,7 @@ static struct powerdomain core_24xx_pwrdm = {
 	},
 };
 
-#endif	   /* CONFIG_ARCH_OMAP24XX */
+#endif	   /* CONFIG_ARCH_OMAP2 */
 
 
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f195457d1b03..df497fc33f2b 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -124,7 +124,7 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -145,7 +145,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 30b5db73017a..59f92c8bfc6d 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -244,7 +244,7 @@ fail:
 
 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 #define	OMAP_RNG_BASE		0x480A0000
 #else
 #define	OMAP_RNG_BASE		0xfffe5000
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index c09b3d9bcd3b..0fb0e58fec93 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -177,12 +177,12 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) ||  \
 		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
@@ -248,7 +248,7 @@ static struct gpio_bank gpio_bank_7xx[7] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 
 static struct gpio_bank gpio_bank_242x[4] = {
 	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
@@ -426,7 +426,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -493,7 +493,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -546,7 +546,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -592,7 +592,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAOUT;
@@ -684,7 +684,7 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
@@ -856,7 +856,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -937,7 +937,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -954,7 +954,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	__raw_writel(gpio_mask, reg);
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
@@ -1008,7 +1008,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -1077,7 +1077,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -1131,7 +1131,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
@@ -1227,7 +1227,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
@@ -1286,7 +1286,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_7XX)
 		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1756,7 +1756,7 @@ static int __init _omap_gpio_init(void)
 		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 	if (cpu_is_omap242x()) {
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
@@ -1809,7 +1809,7 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
@@ -1903,7 +1903,7 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
 		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
@@ -1927,7 +1927,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1975,7 +1975,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -2013,7 +2013,7 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
@@ -2030,7 +2030,7 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -2045,7 +2045,7 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -2074,7 +2074,7 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -2113,7 +2113,7 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (gen) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | gen, bank->base +
@@ -2240,7 +2240,7 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
 		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
@@ -2300,7 +2300,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 /* FIXME for at least omap2, show pullup/pulldown state */
 
 			irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) ||	\
 		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 33fff4ef382d..7773bceca442 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -50,7 +50,7 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
 #endif
 #if	defined(CONFIG_ARCH_OMAP34XX)
@@ -72,7 +72,7 @@ static struct resource i2c_resources[][2] = {
 static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if	defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
 #endif
 #if	defined(CONFIG_ARCH_OMAP34XX)
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index ccd78fd473d1..527aaae61720 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -114,7 +114,7 @@ unsigned int omap_rev(void);
 #  define OMAP_NAME omap16xx
 # endif
 #endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX))
 # if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
 #  error "OMAP1 and OMAP2 can't be selected at the same time"
 # endif
@@ -233,7 +233,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #endif
 
 #if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
 #  undef  cpu_is_omap242x
 #  undef  cpu_is_omap243x
@@ -248,7 +248,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  define cpu_is_omap343x()		is_omap343x()
 # endif
 #else
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		1
 # endif
@@ -374,7 +374,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap1710()		is_omap1710()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP2)
 # undef  cpu_is_omap2420
 # undef  cpu_is_omap2422
 # undef  cpu_is_omap2423
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 4f22e5bb7ff7..951506277ec8 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -103,7 +103,7 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
index 3122bf68c7ce..4a970ec62dd1 100644
--- a/arch/arm/plat-omap/include/plat/menelaus.h
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
@@ -40,7 +40,7 @@ extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
 
 extern int menelaus_set_regulator_sleep(int enable, u32 val);
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
 #define omap_has_menelaus()	1
 #else
 #define omap_has_menelaus()	0
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 692c90e89ac3..c7472a28ce24 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -135,7 +135,7 @@ struct pin_config {
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 696edfc145a6..7055672a8c68 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -23,8 +23,8 @@
  *
  */
 
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
 
 /*
  * Please place only base defines here and put the rest in device
@@ -85,5 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#endif /* __ASM_ARCH_OMAP24XX_H */
+#endif /* __ASM_ARCH_OMAP2_H */
 
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index d8d5094b37ed..e0cbb9349bc1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -53,7 +53,7 @@
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 87060266ef91..c0df30faa66a 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -114,7 +114,7 @@ config HW_RANDOM_IXP4XX
 
 config HW_RANDOM_OMAP
 	tristate "OMAP Random Number Generator support"
-	depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP24XX)
+	depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP2)
 	default HW_RANDOM
  	---help---
  	  This driver provides kernel-side support for the Random Number
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 87829789243e..1380e1c44e4b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -94,7 +94,7 @@ config TPS65010
 
 config MENELAUS
 	bool "Texas Instruments TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP24XX
+	depends on I2C=y && ARCH_OMAP2
 	help
 	  If you say yes here you get support for the Texas Instruments
 	  TWL92330/Menelaus Power Management chip. This include voltage
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 05adb6a666cf..1477ff8f85f6 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -47,7 +47,7 @@
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
   #define SMC_MEM_RESERVED	1
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP2)
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f55eb0107336..23bd252f3a44 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -164,7 +164,7 @@ config SPI_OMAP_UWIRE
 
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP24xx/OMAP34xx"
-	depends on ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP2 || ARCH_OMAP34XX
 	help
 	  SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
 	  (McSPI) modules.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 050ee147592f..b45e2896ac87 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -194,7 +194,7 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX
 	help
 	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
 	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 6bbbd2ab0ee7..26e728dc1337 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -82,7 +82,7 @@ static const int omap1_dma_reqs[][2] = {};
 static const unsigned long omap1_mcbsp_port[][2] = {};
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 static const int omap24xx_dma_reqs[][2] = {
 	{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
 	{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
-- 
cgit v1.2.3


From a8eb7ca0cbb41c9cd379b8d2a2a5efb503aa65e9 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 12 Feb 2010 12:26:48 -0800
Subject: omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3

Replace ARCH_OMAP34XX with ARCH_OMAP3

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig                | 37 +++++++++----------
 arch/arm/mach-omap2/io.c                   |  4 +--
 arch/arm/mach-omap2/mcbsp.c                |  2 +-
 arch/arm/mach-omap2/mux.c                  |  4 +--
 arch/arm/mach-omap2/mux.h                  |  2 +-
 arch/arm/mach-omap2/omap_hwmod_34xx.h      |  2 +-
 arch/arm/plat-omap/Kconfig                 |  5 +--
 arch/arm/plat-omap/common.c                |  2 +-
 arch/arm/plat-omap/gpio.c                  | 58 +++++++++++++++---------------
 arch/arm/plat-omap/i2c.c                   |  8 ++---
 arch/arm/plat-omap/include/plat/cpu.h      |  8 ++---
 arch/arm/plat-omap/include/plat/io.h       |  2 +-
 arch/arm/plat-omap/include/plat/mcbsp.h    |  8 ++---
 arch/arm/plat-omap/include/plat/omap34xx.h |  6 ++--
 arch/arm/plat-omap/mcbsp.c                 |  6 ++--
 arch/arm/plat-omap/sram.c                  |  2 +-
 drivers/net/smc911x.h                      |  2 +-
 drivers/spi/Kconfig                        |  2 +-
 drivers/spi/omap2_mcspi.c                  |  2 +-
 drivers/usb/Kconfig                        |  2 +-
 drivers/usb/host/ehci-hcd.c                |  2 +-
 drivers/usb/musb/Kconfig                   |  6 ++--
 drivers/usb/musb/musb_core.c               |  2 +-
 drivers/usb/musb/musb_core.h               |  2 +-
 drivers/w1/masters/Kconfig                 |  2 +-
 drivers/watchdog/Kconfig                   |  2 +-
 sound/soc/omap/omap-mcbsp.c                |  6 ++--
 sound/soc/omap/omap-mcbsp.h                |  2 +-
 28 files changed, 92 insertions(+), 96 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 69a6b2baabfe..317b8cb375be 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,14 +11,9 @@ config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP34XX
-	bool "OMAP34xx Based System"
-	depends on ARCH_OMAP3
-	select USB_ARCH_HAS_EHCI
-
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select ARCH_OMAP_OTG
 
 config OMAP_PACKAGE_CBC
@@ -60,42 +55,42 @@ config MACH_OMAP_2430SDP
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
@@ -116,33 +111,33 @@ config MACH_NOKIA_N8X0
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBP
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_IGEP0020
 	bool "IGEP0020"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
@@ -158,7 +153,7 @@ config OMAP3_EMU
 
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	default n
 	help
 	  If you know that none of your system initiators will attempt to
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 103fc0915fb9..5a3d6f9107e4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -125,7 +125,7 @@ static struct map_desc omap243x_io_desc[] __initdata = {
 #endif
 #endif
 
-#ifdef	CONFIG_ARCH_OMAP34XX
+#ifdef	CONFIG_ARCH_OMAP3
 static struct map_desc omap34xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_34XX_VIRT,
@@ -269,7 +269,7 @@ void __init omap243x_map_common_io()
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 void __init omap34xx_map_common_io()
 {
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index baa451733850..4b6e5157520f 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -119,7 +119,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 #define OMAP2430_MCBSP_PDATA_SZ		0
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP34XX_MCBSP1_BASE,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fa7c8dad35ef..5ee2372f3b42 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -369,7 +369,7 @@ int __init omap2_mux_init(void)
 
 /*----------------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static LIST_HEAD(muxmodes);
 static DEFINE_MUTEX(muxmode_mutex);
 
@@ -1018,5 +1018,5 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	return 0;
 }
 
-#endif	/* CONFIG_ARCH_OMAP34XX */
+#endif	/* CONFIG_ARCH_OMAP3 */
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index f8c2e7a8f063..480abc56e605 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -102,7 +102,7 @@ struct omap_board_mux {
 	u16	value;
 };
 
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
 
 /**
  * omap_mux_init_gpio - initialize a signal based on the GPIO number
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
index b6076b9c364e..2e629dcb2fb1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_34xx.h
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -12,7 +12,7 @@
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 
 #include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index df497fc33f2b..1e223924da8a 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -30,6 +30,7 @@ config ARCH_OMAP3
 	bool "TI OMAP3"
 	depends on ARCH_OMAP2PLUS
 	select CPU_V7
+	select USB_ARCH_HAS_EHCI
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -124,7 +125,7 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -145,7 +146,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 7cbc0a214aab..4f29e8c0f539 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -127,7 +127,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs)
 #define omap2430_32k_read	NULL
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static cycle_t omap34xx_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 0fb0e58fec93..9608019fd6e4 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -178,11 +178,11 @@ struct gpio_bank {
 	u16 virtual_irq_start;
 	int method;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) ||  \
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+		defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
@@ -276,7 +276,7 @@ static struct gpio_bank gpio_bank_243x[5] = {
 
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static struct gpio_bank gpio_bank_34xx[6] = {
 	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
 		METHOD_GPIO_24XX },
@@ -426,7 +426,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -493,7 +493,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -546,7 +546,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -592,7 +592,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAOUT;
@@ -684,7 +684,7 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
@@ -856,7 +856,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -937,7 +937,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -954,7 +954,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	__raw_writel(gpio_mask, reg);
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
@@ -1008,7 +1008,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -1077,7 +1077,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -1131,7 +1131,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
@@ -1227,7 +1227,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
@@ -1286,7 +1286,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_7XX)
 		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1766,7 +1766,7 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_243x;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 	if (cpu_is_omap34xx()) {
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
@@ -1809,7 +1809,7 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
@@ -1904,7 +1904,7 @@ static int __init _omap_gpio_init(void)
 }
 
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+		defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1927,7 +1927,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1975,7 +1975,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -2013,7 +2013,7 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
@@ -2030,7 +2030,7 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -2045,7 +2045,7 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -2074,7 +2074,7 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -2113,7 +2113,7 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (gen) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | gen, bank->base +
@@ -2144,7 +2144,7 @@ void omap2_gpio_resume_after_retention(void)
 
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 /* save the registers of bank 2-6 */
 void omap_gpio_save_context(void)
 {
@@ -2241,7 +2241,7 @@ static int __init omap_gpio_sysinit(void)
 	mpuio_init();
 
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+		defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -2301,7 +2301,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 			irqstat = irq_desc[irq].status;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) ||	\
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+		defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 7773bceca442..96d2781ac4f5 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -50,10 +50,10 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
 #endif
-#if	defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP3)
 	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
 #endif
 };
@@ -72,10 +72,10 @@ static struct resource i2c_resources[][2] = {
 static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
 #endif
-#if	defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP3)
 	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
 #endif
 };
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 527aaae61720..995466d0432a 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -114,7 +114,7 @@ unsigned int omap_rev(void);
 #  define OMAP_NAME omap16xx
 # endif
 #endif
-#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX))
+#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
 # if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
 #  error "OMAP1 and OMAP2 can't be selected at the same time"
 # endif
@@ -241,7 +241,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  define cpu_is_omap242x()		is_omap242x()
 #  define cpu_is_omap243x()		is_omap243x()
 # endif
-# if defined(CONFIG_ARCH_OMAP34XX)
+# if defined(CONFIG_ARCH_OMAP3)
 #  undef  cpu_is_omap34xx
 #  undef  cpu_is_omap343x
 #  define cpu_is_omap34xx()		is_omap34xx()
@@ -260,7 +260,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP34XX)
+# if defined(CONFIG_ARCH_OMAP3)
 #  undef  cpu_is_omap34xx
 #  define cpu_is_omap34xx()		1
 # endif
@@ -385,7 +385,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap2430()		is_omap2430()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
 # undef cpu_is_omap3430
 # undef cpu_is_omap3503
 # undef cpu_is_omap3515
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 19257bbbc9f3..eef914d53971 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -284,7 +284,7 @@ static inline void omap243x_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 extern void omap34xx_map_common_io(void);
 #else
 static inline void omap34xx_map_common_io(void)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 951506277ec8..0d7e536a3c95 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -103,7 +103,7 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -374,7 +374,7 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 	u16 buffer_size;
 #endif
 };
@@ -410,7 +410,7 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *iclk;
 	struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 	int dma_op_mode;
 	u16 max_tx_thres;
 	u16 max_rx_thres;
@@ -423,7 +423,7 @@ int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 077f05979f86..2845fdc658b0 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -21,8 +21,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
+#ifndef __ASM_ARCH_OMAP3_H
+#define __ASM_ARCH_OMAP3_H
 
 /*
  * Please place only base defines here and put the rest in device
@@ -82,5 +82,5 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#endif /* __ASM_ARCH_OMAP34XX_H */
+#endif /* __ASM_ARCH_OMAP3_H */
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f75767278fc3..c1eb61529394 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -198,7 +198,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 /*
  * omap_mcbsp_set_tx_threshold configures how to deal
  * with transmit threshold. the threshold value and handler can be
@@ -1107,7 +1107,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 #define max_thres(m)			(mcbsp->pdata->buffer_size)
 #define valid_threshold(m, val)		((val) <= max_thres(m))
 #define THRESHOLD_PROP_BUILDER(prop)					\
@@ -1246,7 +1246,7 @@ static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
 #else
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
 static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP34XX */
+#endif /* CONFIG_ARCH_OMAP3 */
 
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e0cbb9349bc1..51f4dfb82e2b 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -53,7 +53,7 @@
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 1477ff8f85f6..3269292efecc 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -42,7 +42,7 @@
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-#elif defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP3)
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 23bd252f3a44..66c35d74a76b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -164,7 +164,7 @@ config SPI_OMAP_UWIRE
 
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP24xx/OMAP34xx"
-	depends on ARCH_OMAP2 || ARCH_OMAP34XX
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 	help
 	  SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
 	  (McSPI) modules.
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index bf5f95a19413..715c518b1b68 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1014,7 +1014,7 @@ static u8 __initdata spi2_txdma_id[] = {
 	OMAP24XX_DMA_SPI2_TX1,
 };
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) \
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
 	|| defined(CONFIG_ARCH_OMAP4)
 static u8 __initdata spi3_rxdma_id[] = {
 	OMAP24XX_DMA_SPI3_RX0,
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 81aac7f4ca59..4f5bb5698f5d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -61,7 +61,7 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_W90X900
 	default y if ARCH_AT91SAM9G45
 	default y if ARCH_MXC
-	default y if ARCH_OMAP34XX
+	default y if ARCH_OMAP3
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1ec3857f22e6..d8d6d3461d32 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1118,7 +1118,7 @@ MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 #include "ehci-omap.c"
 #define        PLATFORM_DRIVER         ehci_hcd_omap_driver
 #endif
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index d9db86498022..b4c783c284ba 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -37,7 +37,7 @@ config USB_MUSB_SOC
 	depends on USB_MUSB_HDRC
 	default y if ARCH_DAVINCI
 	default y if ARCH_OMAP2430
-	default y if ARCH_OMAP34XX
+	default y if ARCH_OMAP3
 	default y if (BF54x && !BF544)
 	default y if (BF52x && !BF522 && !BF523)
 
@@ -48,7 +48,7 @@ comment "OMAP 243x high speed USB support"
 	depends on USB_MUSB_HDRC && ARCH_OMAP2430
 
 comment "OMAP 343x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+	depends on USB_MUSB_HDRC && ARCH_OMAP3
 
 comment "Blackfin high speed USB Support"
 	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
@@ -153,7 +153,7 @@ config MUSB_PIO_ONLY
 config USB_INVENTRA_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN
+	default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN
 	help
 	  Enable DMA transfers using Mentor's engine.
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 5eb9318cff77..738efd8063b5 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1000,7 +1000,7 @@ static void musb_shutdown(struct platform_device *pdev)
  * more than selecting one of a bunch of predefined configurations.
  */
 #if defined(CONFIG_USB_TUSB6010) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
 static ushort __initdata fifo_mode = 4;
 #else
 static ushort __initdata fifo_mode = 2;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 03d50909b078..5514c7ee85bd 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -562,7 +562,7 @@ extern void musb_hnp_stop(struct musb *musb);
 extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
 
 #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
 extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
 #else
 #define musb_platform_try_idle(x, y)		do {} while (0)
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 3195fb8b7d9a..80b3b123dd7f 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -60,7 +60,7 @@ config W1_MASTER_GPIO
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
-	depends on ARCH_OMAP2430 || ARCH_OMAP34XX
+	depends on ARCH_OMAP2430 || ARCH_OMAP3
 	help
 	  Say Y here if you want support for the 1-wire or HDQ Interface
 	  on an OMAP processor.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b45e2896ac87..3da3f48720a7 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -194,7 +194,7 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3
 	help
 	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
 	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 26e728dc1337..c0039b35fb25 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -82,11 +82,11 @@ static const int omap1_dma_reqs[][2] = {};
 static const unsigned long omap1_mcbsp_port[][2] = {};
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 static const int omap24xx_dma_reqs[][2] = {
 	{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
 	{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
 	{ OMAP24XX_DMA_MCBSP3_TX, OMAP24XX_DMA_MCBSP3_RX },
 	{ OMAP24XX_DMA_MCBSP4_TX, OMAP24XX_DMA_MCBSP4_RX },
 	{ OMAP24XX_DMA_MCBSP5_TX, OMAP24XX_DMA_MCBSP5_RX },
@@ -124,7 +124,7 @@ static const unsigned long omap2430_mcbsp_port[][2] = {
 static const unsigned long omap2430_mcbsp_port[][2] = {};
 #endif
 
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
 static const unsigned long omap34xx_mcbsp_port[][2] = {
 	{ OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR,
 	  OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR },
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index 647d2f981ab0..1968d03bc532 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -50,7 +50,7 @@ enum omap_mcbsp_div {
 #undef  NUM_LINKS
 #define NUM_LINKS	3
 #endif
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
 #undef  NUM_LINKS
 #define NUM_LINKS	5
 #endif
-- 
cgit v1.2.3


From 2bf9fa6980a5ca12333634e48c8dd69024b88eba Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 12 Feb 2010 13:02:23 -0800
Subject: wireless: airo_cs build fixes

When WEXT_PRIV is not enabled, airo_cs has build errors.
It needs to include net/iw_handler.h and it should select
WEXT_PRIV, like the airo driver does.

drivers/net/wireless/airo.c:7655: error: unknown field 'num_private' specified in initializer
drivers/net/wireless/airo.c:7655: warning: initialization makes pointer from integer without a cast
drivers/net/wireless/airo.c:7656: error: unknown field 'num_private_args' specified in initializer
drivers/net/wireless/airo.c:7656: warning: excess elements in struct initializer
drivers/net/wireless/airo.c:7656: warning: (near initialization for 'airo_handler_def')
drivers/net/wireless/airo.c:7658: error: unknown field 'private' specified in initializer
drivers/net/wireless/airo.c:7658: warning: initialization makes integer from pointer without a cast
drivers/net/wireless/airo.c:7658: error: initializer element is not computable at load time
drivers/net/wireless/airo.c:7658: error: (near initialization for 'airo_handler_def.num_standard')
drivers/net/wireless/airo.c:7659: error: unknown field 'private_args' specified in initializer
drivers/net/wireless/airo.c:7659: warning: initialization from incompatible pointer type

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/Kconfig | 1 +
 drivers/net/wireless/airo.c  | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 56dd6650c97a..588943660755 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -112,6 +112,7 @@ config AIRO_CS
 	depends on PCMCIA && (BROKEN || !M32R)
 	select WIRELESS_EXT
 	select WEXT_SPY
+	select WEXT_PRIV
 	select CRYPTO
 	select CRYPTO_AES
 	---help---
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 2a9f029a3c74..260fb9905e97 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -51,6 +51,7 @@
 #include <linux/freezer.h>
 
 #include <linux/ieee80211.h>
+#include <net/iw_handler.h>
 
 #include "airo.h"
 
-- 
cgit v1.2.3


From 063b2dfffc896fc5ac6943248c940619b94f09c2 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 13 Feb 2010 18:10:52 +0100
Subject: b43legacy: fix typo in ifdef comment

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/leds.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43legacy/leds.h b/drivers/net/wireless/b43legacy/leds.h
index 82167a90088f..9ff6750dc57f 100644
--- a/drivers/net/wireless/b43legacy/leds.h
+++ b/drivers/net/wireless/b43legacy/leds.h
@@ -45,7 +45,7 @@ enum b43legacy_led_behaviour {
 void b43legacy_leds_init(struct b43legacy_wldev *dev);
 void b43legacy_leds_exit(struct b43legacy_wldev *dev);
 
-#else /* CONFIG_B43EGACY_LEDS */
+#else /* CONFIG_B43LEGACY_LEDS */
 /* LED support disabled */
 
 struct b43legacy_led {
-- 
cgit v1.2.3


From 634c8d2587abbd680603e016ae1060129abdf46f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 13 Feb 2010 18:10:53 +0100
Subject: rtl8187: fix typo in ifdef comment

Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187_leds.c | 2 +-
 drivers/net/wireless/rtl818x/rtl8187_leds.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index f82aa8b4bdde..4637337d5ce6 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -241,5 +241,5 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev)
 	cancel_delayed_work_sync(&priv->led_off);
 	cancel_delayed_work_sync(&priv->led_on);
 }
-#endif /* def CONFIG_RTL8187_LED */
+#endif /* def CONFIG_RTL8187_LEDS */
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.h b/drivers/net/wireless/rtl818x/rtl8187_leds.h
index efe8041bdda4..d743c96d4a20 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.h
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.h
@@ -54,6 +54,6 @@ struct rtl8187_led {
 void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code);
 void rtl8187_leds_exit(struct ieee80211_hw *dev);
 
-#endif /* def CONFIG_RTL8187_LED */
+#endif /* def CONFIG_RTL8187_LEDS */
 
 #endif /* RTL8187_LED_H */
-- 
cgit v1.2.3


From 15a69a81731d337a3d9db51692ff8704c1114f43 Mon Sep 17 00:00:00 2001
From: Shimada Hirofumi <hirofumi@flycat.org>
Date: Sun, 14 Feb 2010 04:16:16 +0900
Subject: p54usb: Add usbid for Corega CG-WLUSB2GT.

Signed-off-by: Shimada Hirofumi <hirofumi@flycat.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 92af9b96bb7a..dcb484bd5984 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -36,6 +36,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	/* Version 1 devices (pci chip + net2280) */
 	{USB_DEVICE(0x0506, 0x0a11)},	/* 3COM 3CRWE254G72 */
 	{USB_DEVICE(0x0707, 0xee06)},	/* SMC 2862W-G */
+	{USB_DEVICE(0x07aa, 0x001c)},	/* Corega CG-WLUSB2GT */
 	{USB_DEVICE(0x083a, 0x4501)},	/* Accton 802.11g WN4501 USB */
 	{USB_DEVICE(0x083a, 0x4502)},	/* Siemens Gigaset USB Adapter */
 	{USB_DEVICE(0x083a, 0x5501)},	/* Phillips CPWUA054 */
-- 
cgit v1.2.3


From cea90e55969ff70b970d64d564076a5469331527 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 13 Feb 2010 20:55:47 +0100
Subject: rt2x00: Introduce SoC interface type.

Introduce the SoC interface type to detect SoC devices, instead of having
them mimic being PCI devices.
This allows for easier detection of SoC devices.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 38 ++++++++++++++++-----------------
 drivers/net/wireless/rt2x00/rt2800pci.c | 18 ++++++----------
 drivers/net/wireless/rt2x00/rt2x00.h    | 10 +++++++--
 drivers/net/wireless/rt2x00/rt2x00soc.c |  6 +-----
 4 files changed, 34 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index a45e027f2d1f..e78df53b9515 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -89,7 +89,7 @@ static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-		if (rt2x00_intf_is_pci(rt2x00dev))
+		if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
 			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 
 		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
@@ -118,7 +118,7 @@ static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
-		if (rt2x00_intf_is_pci(rt2x00dev))
+		if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
 			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 
 		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
@@ -218,9 +218,9 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	/*
-	 * RT2880 and RT3052 don't support MCU requests.
+	 * SOC devices don't support MCU requests.
 	 */
-	if (rt2x00_rt(rt2x00dev, RT2880) || rt2x00_rt(rt2x00dev, RT3052))
+	if (rt2x00_is_soc(rt2x00dev))
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
@@ -660,7 +660,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
 	switch ((int)ant->tx) {
 	case 1:
 		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-		if (rt2x00_intf_is_pci(rt2x00dev))
+		if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
 			rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
 		break;
 	case 2:
@@ -1057,7 +1057,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_stats);
 static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
 {
 	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
-		if (rt2x00_intf_is_usb(rt2x00dev) &&
+		if (rt2x00_is_usb(rt2x00dev) &&
 		    rt2x00_rev(rt2x00dev) == RT3070_VERSION)
 			return 0x1c + (2 * rt2x00dev->lna_gain);
 		else
@@ -1109,7 +1109,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 	unsigned int i;
 
-	if (rt2x00_intf_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev)) {
 		/*
 		 * Wait until BBP and RF are ready.
 		 */
@@ -1128,7 +1128,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 		rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
 				      reg & ~0x00002000);
-	} else if (rt2x00_intf_is_pci(rt2x00dev))
+	} else if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
 		rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
 
 	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
@@ -1136,7 +1136,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
-	if (rt2x00_intf_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev)) {
 		rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
 #if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
 		rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
@@ -1174,7 +1174,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
-	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	if (rt2x00_is_usb(rt2x00dev) &&
 	    rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
@@ -1293,7 +1293,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
 	rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
 
-	if (rt2x00_intf_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev)) {
 		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 
 		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
@@ -1353,7 +1353,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
 	rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
 
-	if (rt2x00_intf_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev)) {
 		rt2800_register_read(rt2x00dev, USB_CYC_CFG, &reg);
 		rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
 		rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
@@ -1490,7 +1490,7 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	if (rt2x00_rev(rt2x00dev) > RT2860D_VERSION)
 		rt2800_bbp_write(rt2x00dev, 84, 0x19);
 
-	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	if (rt2x00_is_usb(rt2x00dev) &&
 	    rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
 		rt2800_bbp_write(rt2x00dev, 70, 0x0a);
 		rt2800_bbp_write(rt2x00dev, 84, 0x99);
@@ -1582,11 +1582,11 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	u8 rfcsr;
 	u8 bbp;
 
-	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	if (rt2x00_is_usb(rt2x00dev) &&
 	    rt2x00_rev(rt2x00dev) != RT3070_VERSION)
 		return 0;
 
-	if (rt2x00_intf_is_pci(rt2x00dev)) {
+	if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
 		if (!rt2x00_rf(rt2x00dev, RF3020) &&
 		    !rt2x00_rf(rt2x00dev, RF3021) &&
 		    !rt2x00_rf(rt2x00dev, RF3022))
@@ -1603,7 +1603,7 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
 	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
 
-	if (rt2x00_intf_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev)) {
 		rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
 		rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
 		rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
@@ -1624,7 +1624,7 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
 		rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
 		rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
-	} else if (rt2x00_intf_is_pci(rt2x00dev)) {
+	} else if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
 		rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
 		rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
 		rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
@@ -1855,7 +1855,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
-	if (rt2x00_intf_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev)) {
 		/*
 		 * The check for rt2860 is not a typo, some rt2870 hardware
 		 * identifies itself as rt2860 in the CSR register.
@@ -2039,7 +2039,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Disable powersaving as default on PCI devices.
 	 */
-	if (rt2x00_intf_is_pci(rt2x00dev))
+	if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
 		rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index daea0b7c416e..d57531ce1f82 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1041,18 +1041,12 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Read EEPROM into buffer
 	 */
-	switch (rt2x00dev->chip.rt) {
-	case RT2880:
-	case RT3052:
+	if (rt2x00_is_soc(rt2x00dev))
 		rt2800pci_read_eeprom_soc(rt2x00dev);
-		break;
-	default:
-		if (rt2800pci_efuse_detect(rt2x00dev))
-			rt2800pci_read_eeprom_efuse(rt2x00dev);
-		else
-			rt2800pci_read_eeprom_pci(rt2x00dev);
-		break;
-	}
+	else if (rt2800pci_efuse_detect(rt2x00dev))
+		rt2800pci_read_eeprom_efuse(rt2x00dev);
+	else
+		rt2800pci_read_eeprom_pci(rt2x00dev);
 
 	return rt2800_validate_eeprom(rt2x00dev);
 }
@@ -1103,7 +1097,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * This device requires firmware.
 	 */
-	if (!rt2x00_rt(rt2x00dev, RT2880) && !rt2x00_rt(rt2x00dev, RT3052))
+	if (!rt2x00_is_soc(rt2x00dev))
 		__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 43b70c6e4e9c..d741367304bb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -160,6 +160,7 @@ struct avg_val {
 enum rt2x00_chip_intf {
 	RT2X00_CHIP_INTF_PCI,
 	RT2X00_CHIP_INTF_USB,
+	RT2X00_CHIP_INTF_SOC,
 };
 
 /*
@@ -976,16 +977,21 @@ static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev,
 	return (rt2x00dev->chip.intf == intf);
 }
 
-static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev)
+static inline bool rt2x00_is_pci(struct rt2x00_dev *rt2x00dev)
 {
 	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
 }
 
-static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev)
+static inline bool rt2x00_is_usb(struct rt2x00_dev *rt2x00dev)
 {
 	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
 }
 
+static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC);
+}
+
 /**
  * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index 19e684f8ffa1..0d6b43afc4e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -94,11 +94,7 @@ int rt2x00soc_probe(struct platform_device *pdev,
 	rt2x00dev->irq = platform_get_irq(pdev, 0);
 	rt2x00dev->name = pdev->dev.driver->name;
 
-	/*
-	 * SoC devices mimic PCI behavior.
-	 */
-	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
-
+	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC);
 	rt2x00_set_chip_rt(rt2x00dev, chipset);
 
 	retval = rt2x00soc_alloc_reg(rt2x00dev);
-- 
cgit v1.2.3


From 714fa6636331d33c6045efe394f36c964a6c14ee Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 13 Feb 2010 20:55:48 +0100
Subject: rt2x00: Reorganize RT chipset setting for PCI/SOC devices.

Don't set the RT chipset for a device from within the generic PCI/SOC code,
but rather from the individual drivers, so that individual drivers have
more control over what RT chipset is set.
Preparation for chip handling updates for rt2800 devices.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c |  9 ++++++--
 drivers/net/wireless/rt2x00/rt2500pci.c |  9 ++++++--
 drivers/net/wireless/rt2x00/rt2500usb.c |  1 -
 drivers/net/wireless/rt2x00/rt2800lib.c | 39 ++++++++++++++++++++++++---------
 drivers/net/wireless/rt2x00/rt2800pci.c | 11 +++++-----
 drivers/net/wireless/rt2x00/rt2x00.h    | 15 -------------
 drivers/net/wireless/rt2x00/rt2x00pci.c |  7 ------
 drivers/net/wireless/rt2x00/rt2x00pci.h |  1 +
 drivers/net/wireless/rt2x00/rt2x00soc.c |  5 +----
 drivers/net/wireless/rt2x00/rt2x00soc.h | 10 +--------
 drivers/net/wireless/rt2x00/rt61pci.c   |  9 ++++++--
 drivers/net/wireless/rt2x00/rt73usb.c   |  1 -
 12 files changed, 58 insertions(+), 59 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 184335950825..9207b9b100b0 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1327,6 +1327,7 @@ static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
+	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -1335,13 +1336,17 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
+	/*
+	 * Identify RT chipset.
+	 */
+	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
+
 	/*
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip_rf(rt2x00dev, value, reg);
-	rt2x00_print_chip(rt2x00dev);
+	rt2x00_set_chip(rt2x00dev, chip, value, reg);
 
 	if (!rt2x00_rf(rt2x00dev, RF2420) && !rt2x00_rf(rt2x00dev, RF2421)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 7dfcffadda2a..0f6d001267ac 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1490,6 +1490,7 @@ static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
+	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -1498,13 +1499,17 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
+	/*
+	 * Identify RT chipset.
+	 */
+	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
+
 	/*
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip_rf(rt2x00dev, value, reg);
-	rt2x00_print_chip(rt2x00dev);
+	rt2x00_set_chip(rt2x00dev, chip, value, reg);
 
 	if (!rt2x00_rf(rt2x00dev, RF2522) &&
 	    !rt2x00_rf(rt2x00dev, RF2523) &&
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 81ca4ec068db..99b7cb88a648 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1408,7 +1408,6 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
-	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0) ||
 	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e78df53b9515..7340e487df6b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -40,6 +40,9 @@
 #if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
 #include "rt2x00usb.h"
 #endif
+#if defined(CONFIG_RT2X00_LIB_PCI) || defined(CONFIG_RT2X00_LIB_PCI_MODULE)
+#include "rt2x00pci.h"
+#endif
 #include "rt2800lib.h"
 #include "rt2800.h"
 #include "rt2800usb.h"
@@ -1839,6 +1842,7 @@ EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
 int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
+	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -1853,25 +1857,40 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 
-	rt2x00_set_chip_rf(rt2x00dev, value, reg);
-
-	if (rt2x00_is_usb(rt2x00dev)) {
+	if (rt2x00_is_pci(rt2x00dev)) {
+#if defined(CONFIG_RT2X00_LIB_PCI) || defined(CONFIG_RT2X00_LIB_PCI_MODULE)
+		pci_read_config_word(to_pci_dev(rt2x00dev->dev),
+				     PCI_DEVICE_ID,
+				     &chip);
+#else
+		BUG();
+#endif
+	} else if (rt2x00_is_usb(rt2x00dev)) {
 		/*
 		 * The check for rt2860 is not a typo, some rt2870 hardware
 		 * identifies itself as rt2860 in the CSR register.
 		 */
-		if (rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28600000) ||
-		    rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28700000) ||
-		    rt2x00_check_rev(rt2x00dev, 0xfff00000, 0x28800000)) {
-			rt2x00_set_chip_rt(rt2x00dev, RT2870);
-		} else if (rt2x00_check_rev(rt2x00dev, 0xffff0000, 0x30700000)) {
-			rt2x00_set_chip_rt(rt2x00dev, RT3070);
+		if (((reg & 0xfff00000) == 0x28600000) ||
+		    ((reg & 0xfff00000) == 0x28700000) ||
+		    ((reg & 0xfff00000) == 0x28800000)) {
+			chip = RT2870;
+		} else if ((reg & 0xffff0000) == 0x30700000) {
+			chip = RT3070;
 		} else {
 			ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 			return -ENODEV;
 		}
+	} else if (rt2x00_is_soc(rt2x00dev)) {
+#if defined(CONFIG_RALINK_RT288X)
+		chip = RT2880;
+#elif defined(CONFIG_RALINK_RT305X)
+		chip = RT3052;
+#else
+		BUG();
+#endif
 	}
-	rt2x00_print_chip(rt2x00dev);
+
+	rt2x00_set_chip(rt2x00dev, chip, value, reg);
 
 	if (!rt2x00_rf(rt2x00dev, RF2820) &&
 	    !rt2x00_rf(rt2x00dev, RF2850) &&
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index d57531ce1f82..fc351052229b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1219,11 +1219,10 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
 MODULE_LICENSE("GPL");
 
 #ifdef CONFIG_RT2800PCI_SOC
-#if defined(CONFIG_RALINK_RT288X)
-__rt2x00soc_probe(RT2880, &rt2800pci_ops);
-#elif defined(CONFIG_RALINK_RT305X)
-__rt2x00soc_probe(RT3052, &rt2800pci_ops);
-#endif
+static int rt2800soc_probe(struct platform_device *pdev)
+{
+	return rt2x00soc_probe(pdev, rt2800pci_ops);
+}
 
 static struct platform_driver rt2800soc_driver = {
 	.driver		= {
@@ -1231,7 +1230,7 @@ static struct platform_driver rt2800soc_driver = {
 		.owner		= THIS_MODULE,
 		.mod_name	= KBUILD_MODNAME,
 	},
-	.probe		= __rt2x00soc_probe,
+	.probe		= rt2800soc_probe,
 	.remove		= __devexit_p(rt2x00soc_remove),
 	.suspend	= rt2x00soc_suspend,
 	.resume		= rt2x00soc_resume,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index d741367304bb..1fed90acd198 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -923,22 +923,7 @@ static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
 	rt2x00dev->chip.rt = rt;
 	rt2x00dev->chip.rf = rf;
 	rt2x00dev->chip.rev = rev;
-}
-
-static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
-				      const u16 rt)
-{
-	rt2x00dev->chip.rt = rt;
-}
 
-static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
-				      const u16 rf, const u32 rev)
-{
-	rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
-}
-
-static inline void rt2x00_print_chip(struct rt2x00_dev *rt2x00dev)
-{
 	INFO(rt2x00dev,
 	     "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
 	     rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 801be436cf1d..047123b766fc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -272,7 +272,6 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	struct ieee80211_hw *hw;
 	struct rt2x00_dev *rt2x00dev;
 	int retval;
-	u16 chip;
 
 	retval = pci_request_regions(pci_dev, pci_name(pci_dev));
 	if (retval) {
@@ -315,12 +314,6 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 
 	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
 
-	/*
-	 * Determine RT chipset by reading PCI header.
-	 */
-	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
-	rt2x00_set_chip_rt(rt2x00dev, chip);
-
 	retval = rt2x00pci_alloc_reg(rt2x00dev);
 	if (retval)
 		goto exit_free_device;
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index d4f9449ab0a4..8149ff68410a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -27,6 +27,7 @@
 #define RT2X00PCI_H
 
 #include <linux/io.h>
+#include <linux/pci.h>
 
 /*
  * This variable should be used with the
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index 0d6b43afc4e8..4efdc96010f6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -71,9 +71,7 @@ exit:
 	return -ENOMEM;
 }
 
-int rt2x00soc_probe(struct platform_device *pdev,
-		    const unsigned short chipset,
-		    const struct rt2x00_ops *ops)
+int rt2x00soc_probe(struct platform_device *pdev, const struct rt2x00_ops *ops)
 {
 	struct ieee80211_hw *hw;
 	struct rt2x00_dev *rt2x00dev;
@@ -95,7 +93,6 @@ int rt2x00soc_probe(struct platform_device *pdev,
 	rt2x00dev->name = pdev->dev.driver->name;
 
 	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC);
-	rt2x00_set_chip_rt(rt2x00dev, chipset);
 
 	retval = rt2x00soc_alloc_reg(rt2x00dev);
 	if (retval)
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
index 8a3416624af5..4739edfe2f00 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.h
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -28,18 +28,10 @@
 
 #define KSEG1ADDR(__ptr) __ptr
 
-#define __rt2x00soc_probe(__chipset, __ops) \
-static int __rt2x00soc_probe(struct platform_device *pdev) \
-{ \
-	return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
-}
-
 /*
  * SoC driver handlers.
  */
-int rt2x00soc_probe(struct platform_device *pdev,
-		    const unsigned short chipset,
-		    const struct rt2x00_ops *ops);
+int rt2x00soc_probe(struct platform_device *pdev, const struct rt2x00_ops *ops);
 int rt2x00soc_remove(struct platform_device *pdev);
 #ifdef CONFIG_PM
 int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 881340026c2a..4ca1d48fb737 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2282,6 +2282,7 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
+	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -2290,13 +2291,17 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
+	/*
+	 * Identify RT chipset.
+	 */
+	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
+
 	/*
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
-	rt2x00_set_chip_rf(rt2x00dev, value, reg);
-	rt2x00_print_chip(rt2x00dev);
+	rt2x00_set_chip(rt2x00dev, chip, value, reg);
 
 	if (!rt2x00_rf(rt2x00dev, RF5225) &&
 	    !rt2x00_rf(rt2x00dev, RF5325) &&
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 3781eb7b4aa0..2950ac754921 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1821,7 +1821,6 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
-	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0x25730) ||
 	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
-- 
cgit v1.2.3


From 49e721ec6ca74f90ee99089ad2de1c338a95c6d5 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sat, 13 Feb 2010 20:55:49 +0100
Subject: rt2x00: rework RT chipset and revision determination for PCI an SOC
 devices.

The recent rt2800 devices are no longer really identified by their PCI
ID's, but rather by the contents of their CSR0 register. Also for the
other chipsets is the contents of this CSR0 register important.
Change the chipset determination logic to be more aligned with the rt2800
model.
Preparation for the support of rt3070 / rt3090 based devices.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c   |  9 +--
 drivers/net/wireless/rt2x00/rt2400pci.h   |  1 +
 drivers/net/wireless/rt2x00/rt2500pci.c   |  9 +--
 drivers/net/wireless/rt2x00/rt2500pci.h   |  1 +
 drivers/net/wireless/rt2x00/rt2500usb.c   |  3 +-
 drivers/net/wireless/rt2x00/rt2800.h      | 14 ++---
 drivers/net/wireless/rt2x00/rt2800lib.c   | 92 ++++++++++++++++---------------
 drivers/net/wireless/rt2x00/rt2800usb.c   | 20 +++----
 drivers/net/wireless/rt2x00/rt2x00.h      | 41 ++++++--------
 drivers/net/wireless/rt2x00/rt2x00debug.c |  4 +-
 drivers/net/wireless/rt2x00/rt61pci.c     | 19 +++----
 drivers/net/wireless/rt2x00/rt61pci.h     |  9 +++
 drivers/net/wireless/rt2x00/rt73usb.c     |  6 +-
 drivers/net/wireless/rt2x00/rt73usb.h     |  2 +
 14 files changed, 112 insertions(+), 118 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 9207b9b100b0..676814d3a81b 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1327,7 +1327,6 @@ static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
-	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -1336,17 +1335,13 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
-	/*
-	 * Identify RT chipset.
-	 */
-	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
-
 	/*
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, chip, value, reg);
+	rt2x00_set_chip(rt2x00dev, RT2460, value,
+			rt2x00_get_field32(reg, CSR0_REVISION));
 
 	if (!rt2x00_rf(rt2x00dev, RF2420) && !rt2x00_rf(rt2x00dev, RF2421)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index 6c21ef66dfe0..606137738848 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -65,6 +65,7 @@
  * CSR0: ASIC revision number.
  */
 #define CSR0				0x0000
+#define CSR0_REVISION			FIELD32(0x0000ffff)
 
 /*
  * CSR1: System control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 0f6d001267ac..c71266142ae9 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1490,7 +1490,6 @@ static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
-	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -1499,17 +1498,13 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
-	/*
-	 * Identify RT chipset.
-	 */
-	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
-
 	/*
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, chip, value, reg);
+	rt2x00_set_chip(rt2x00dev, RT2560, value,
+			rt2x00_get_field32(reg, CSR0_REVISION));
 
 	if (!rt2x00_rf(rt2x00dev, RF2522) &&
 	    !rt2x00_rf(rt2x00dev, RF2523) &&
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index b0075674c09b..6471f8e74b35 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -76,6 +76,7 @@
  * CSR0: ASIC revision number.
  */
 #define CSR0				0x0000
+#define CSR0_REVISION			FIELD32(0x0000ffff)
 
 /*
  * CSR1: System control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 99b7cb88a648..ee34c137e7cd 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1409,8 +1409,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0) ||
-	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
+	if (((reg & 0xfff0) != 0) || ((reg & 0x0000000f) == 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 1a7eae357fef..74c0433dba37 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -60,11 +60,11 @@
 /*
  * Chipset version.
  */
-#define RT2860C_VERSION			0x28600100
-#define RT2860D_VERSION			0x28600101
-#define RT2880E_VERSION			0x28720200
-#define RT2883_VERSION			0x28830300
-#define RT3070_VERSION			0x30700200
+#define RT2860C_VERSION			0x0100
+#define RT2860D_VERSION			0x0101
+#define RT2880E_VERSION			0x0200
+#define RT2883_VERSION			0x0300
+#define RT3070_VERSION			0x0200
 
 /*
  * Signal information.
@@ -408,8 +408,8 @@
  * ASIC_VER: 2860 or 2870
  */
 #define MAC_CSR0			0x1000
-#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
-#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
+#define MAC_CSR0_REVISION		FIELD32(0x0000ffff)
+#define MAC_CSR0_CHIPSET		FIELD32(0xffff0000)
 
 /*
  * MAC_SYS_CTRL:
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 7340e487df6b..18d4d8e4ae6b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -898,7 +898,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
 	rt2800_bbp_write(rt2x00dev, 3, bbp);
 
-	if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION) {
+	if (rt2x00_rt(rt2x00dev, RT2860) &&
+	    (rt2x00_rev(rt2x00dev) == RT2860C_VERSION)) {
 		if (conf_is_ht40(conf)) {
 			rt2800_bbp_write(rt2x00dev, 69, 0x1a);
 			rt2800_bbp_write(rt2x00dev, 70, 0x0a);
@@ -1061,7 +1062,8 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
 {
 	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
 		if (rt2x00_is_usb(rt2x00dev) &&
-		    rt2x00_rev(rt2x00dev) == RT3070_VERSION)
+		    rt2x00_rt(rt2x00dev, RT3070) &&
+		    (rt2x00_rev(rt2x00dev) == RT3070_VERSION))
 			return 0x1c + (2 * rt2x00dev->lna_gain);
 		else
 			return 0x2e + rt2x00dev->lna_gain;
@@ -1092,7 +1094,8 @@ EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 		       const u32 count)
 {
-	if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION)
+	if (rt2x00_rt(rt2x00dev, RT2860) &&
+	    (rt2x00_rev(rt2x00dev) == RT2860C_VERSION))
 		return;
 
 	/*
@@ -1178,7 +1181,8 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
 	if (rt2x00_is_usb(rt2x00dev) &&
-	    rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
+	    rt2x00_rt(rt2x00dev, RT3070) &&
+	    (rt2x00_rev(rt2x00dev) == RT3070_VERSION)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -1205,8 +1209,14 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
 	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-	if (rt2x00_rev(rt2x00dev) >= RT2880E_VERSION &&
-	    rt2x00_rev(rt2x00dev) < RT3070_VERSION)
+	if ((rt2x00_rt(rt2x00dev, RT2872) &&
+	     (rt2x00_rev(rt2x00dev) >= RT2880E_VERSION)) ||
+	    rt2x00_rt(rt2x00dev, RT2880) ||
+	    rt2x00_rt(rt2x00dev, RT2883) ||
+	    rt2x00_rt(rt2x00dev, RT2890) ||
+	    rt2x00_rt(rt2x00dev, RT3052) ||
+	    (rt2x00_rt(rt2x00dev, RT3070) &&
+	     (rt2x00_rev(rt2x00dev) < RT3070_VERSION)))
 		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
 	else
 		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
@@ -1485,16 +1495,19 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	rt2800_bbp_write(rt2x00dev, 103, 0x00);
 	rt2800_bbp_write(rt2x00dev, 105, 0x05);
 
-	if (rt2x00_rev(rt2x00dev) == RT2860C_VERSION) {
+	if (rt2x00_rt(rt2x00dev, RT2860) &&
+	    (rt2x00_rev(rt2x00dev) == RT2860C_VERSION)) {
 		rt2800_bbp_write(rt2x00dev, 69, 0x16);
 		rt2800_bbp_write(rt2x00dev, 73, 0x12);
 	}
 
-	if (rt2x00_rev(rt2x00dev) > RT2860D_VERSION)
+	if (rt2x00_rt(rt2x00dev, RT2860) &&
+	    (rt2x00_rev(rt2x00dev) > RT2860D_VERSION))
 		rt2800_bbp_write(rt2x00dev, 84, 0x19);
 
 	if (rt2x00_is_usb(rt2x00dev) &&
-	    rt2x00_rev(rt2x00dev) == RT3070_VERSION) {
+	    rt2x00_rt(rt2x00dev, RT3070) &&
+	    (rt2x00_rev(rt2x00dev) == RT3070_VERSION)) {
 		rt2800_bbp_write(rt2x00dev, 70, 0x0a);
 		rt2800_bbp_write(rt2x00dev, 84, 0x99);
 		rt2800_bbp_write(rt2x00dev, 105, 0x05);
@@ -1586,7 +1599,8 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	u8 bbp;
 
 	if (rt2x00_is_usb(rt2x00dev) &&
-	    rt2x00_rev(rt2x00dev) != RT3070_VERSION)
+	    rt2x00_rt(rt2x00dev, RT3070) &&
+	    (rt2x00_rev(rt2x00dev) != RT3070_VERSION))
 		return 0;
 
 	if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
@@ -1757,7 +1771,12 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
 		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
-	} else if (rt2x00_rev(rt2x00dev) < RT2883_VERSION) {
+	} else if (rt2x00_rt(rt2x00dev, RT2860) ||
+		   rt2x00_rt(rt2x00dev, RT2870) ||
+		   rt2x00_rt(rt2x00dev, RT2872) ||
+		   rt2x00_rt(rt2x00dev, RT2880) ||
+		   (rt2x00_rt(rt2x00dev, RT2883) &&
+		    (rt2x00_rev(rt2x00dev) < RT2883_VERSION))) {
 		/*
 		 * There is a max of 2 RX streams for RT28x0 series
 		 */
@@ -1842,7 +1861,6 @@ EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
 int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
-	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -1857,41 +1875,25 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 
-	if (rt2x00_is_pci(rt2x00dev)) {
-#if defined(CONFIG_RT2X00_LIB_PCI) || defined(CONFIG_RT2X00_LIB_PCI_MODULE)
-		pci_read_config_word(to_pci_dev(rt2x00dev->dev),
-				     PCI_DEVICE_ID,
-				     &chip);
-#else
-		BUG();
-#endif
-	} else if (rt2x00_is_usb(rt2x00dev)) {
-		/*
-		 * The check for rt2860 is not a typo, some rt2870 hardware
-		 * identifies itself as rt2860 in the CSR register.
-		 */
-		if (((reg & 0xfff00000) == 0x28600000) ||
-		    ((reg & 0xfff00000) == 0x28700000) ||
-		    ((reg & 0xfff00000) == 0x28800000)) {
-			chip = RT2870;
-		} else if ((reg & 0xffff0000) == 0x30700000) {
-			chip = RT3070;
-		} else {
-			ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
-			return -ENODEV;
-		}
-	} else if (rt2x00_is_soc(rt2x00dev)) {
-#if defined(CONFIG_RALINK_RT288X)
-		chip = RT2880;
-#elif defined(CONFIG_RALINK_RT305X)
-		chip = RT3052;
-#else
-		BUG();
-#endif
+	rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
+			value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
+
+	if (!rt2x00_rt(rt2x00dev, RT2860) &&
+	    !rt2x00_rt(rt2x00dev, RT2870) &&
+	    !rt2x00_rt(rt2x00dev, RT2872) &&
+	    !rt2x00_rt(rt2x00dev, RT2880) &&
+	    !rt2x00_rt(rt2x00dev, RT2883) &&
+	    !rt2x00_rt(rt2x00dev, RT2890) &&
+	    !rt2x00_rt(rt2x00dev, RT3052) &&
+	    !rt2x00_rt(rt2x00dev, RT3070) &&
+	    !rt2x00_rt(rt2x00dev, RT3071) &&
+	    !rt2x00_rt(rt2x00dev, RT3090) &&
+	    !rt2x00_rt(rt2x00dev, RT3390) &&
+	    !rt2x00_rt(rt2x00dev, RT3572)) {
+		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+		return -ENODEV;
 	}
 
-	rt2x00_set_chip(rt2x00dev, chip, value, reg);
-
 	if (!rt2x00_rf(rt2x00dev, RF2820) &&
 	    !rt2x00_rf(rt2x00dev, RF2850) &&
 	    !rt2x00_rf(rt2x00dev, RF2720) &&
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 82755cf8b73e..79ea3798d597 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -92,7 +92,6 @@ static bool rt2800usb_check_crc(const u8 *data, const size_t len)
 static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 				    const u8 *data, const size_t len)
 {
-	u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
 	size_t offset = 0;
 
 	/*
@@ -111,9 +110,9 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
 	 * Check if we need the upper 4kb firmware data or not.
 	 */
 	if ((len == 4096) &&
-	    (chipset != 0x2860) &&
-	    (chipset != 0x2872) &&
-	    (chipset != 0x3070))
+	    !rt2x00_rt(rt2x00dev, RT2860) &&
+	    !rt2x00_rt(rt2x00dev, RT2872) &&
+	    !rt2x00_rt(rt2x00dev, RT3070))
 		return FW_BAD_VERSION;
 
 	/*
@@ -138,14 +137,13 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 	u32 offset;
 	u32 length;
-	u16 chipset = (rt2x00_rev(rt2x00dev) >> 16) & 0xffff;
 
 	/*
 	 * Check which section of the firmware we need.
 	 */
-	if ((chipset == 0x2860) ||
-	    (chipset == 0x2872) ||
-	    (chipset == 0x3070)) {
+	if (rt2x00_rt(rt2x00dev, RT2860) ||
+	    rt2x00_rt(rt2x00dev, RT2872) ||
+	    rt2x00_rt(rt2x00dev, RT3070)) {
 		offset = 0;
 		length = 4096;
 	} else {
@@ -200,9 +198,9 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	 */
 	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
 
-	if ((chipset == 0x3070) ||
-	    (chipset == 0x3071) ||
-	    (chipset == 0x3572)) {
+	if (rt2x00_rt(rt2x00dev, RT3070) ||
+	    rt2x00_rt(rt2x00dev, RT3071) ||
+	    rt2x00_rt(rt2x00dev, RT3572)) {
 		udelay(200);
 		rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
 		udelay(10);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 1fed90acd198..d9daa9c406fa 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -170,25 +170,26 @@ enum rt2x00_chip_intf {
  */
 struct rt2x00_chip {
 	u16 rt;
-#define RT2460		0x0101
-#define RT2560		0x0201
-#define RT2570		0x1201
-#define RT2561s		0x0301	/* Turbo */
-#define RT2561		0x0302
-#define RT2661		0x0401
-#define RT2571		0x1300
-#define RT2860		0x0601	/* 2.4GHz PCI/CB */
-#define RT2860D		0x0681	/* 2.4GHz, 5GHz PCI/CB */
-#define RT2890		0x0701	/* 2.4GHz PCIe */
-#define RT2890D		0x0781	/* 2.4GHz, 5GHz PCIe */
+#define RT2460		0x2460
+#define RT2560		0x2560
+#define RT2570		0x2570
+#define RT2661		0x2661
+#define RT2573		0x2573
+#define RT2860		0x2860	/* 2.4GHz PCI/CB */
+#define RT2870		0x2870
+#define RT2872		0x2872
 #define RT2880		0x2880	/* WSOC */
+#define RT2883		0x2883	/* WSOC */
+#define RT2890		0x2890	/* 2.4GHz PCIe */
 #define RT3052		0x3052	/* WSOC */
+#define RT3070		0x3070
+#define RT3071		0x3071
 #define RT3090		0x3090	/* 2.4GHz PCIe */
-#define RT2870		0x1600
-#define RT3070		0x1800
+#define RT3390		0x3390
+#define RT3572		0x3572
 
 	u16 rf;
-	u32 rev;
+	u16 rev;
 
 	enum rt2x00_chip_intf intf;
 };
@@ -918,14 +919,14 @@ static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
  * Chipset handlers
  */
 static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
-				   const u16 rt, const u16 rf, const u32 rev)
+				   const u16 rt, const u16 rf, const u16 rev)
 {
 	rt2x00dev->chip.rt = rt;
 	rt2x00dev->chip.rf = rf;
 	rt2x00dev->chip.rev = rev;
 
 	INFO(rt2x00dev,
-	     "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
+	     "Chipset detected - rt: %04x, rf: %04x, rev: %04x.\n",
 	     rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
 }
 
@@ -939,17 +940,11 @@ static inline char rt2x00_rf(struct rt2x00_dev *rt2x00dev, const u16 rf)
 	return (rt2x00dev->chip.rf == rf);
 }
 
-static inline u32 rt2x00_rev(struct rt2x00_dev *rt2x00dev)
+static inline u16 rt2x00_rev(struct rt2x00_dev *rt2x00dev)
 {
 	return rt2x00dev->chip.rev;
 }
 
-static inline bool rt2x00_check_rev(struct rt2x00_dev *rt2x00dev,
-				    const u32 mask, const u32 rev)
-{
-	return ((rt2x00dev->chip.rev & mask) == rev);
-}
-
 static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
 					enum rt2x00_chip_intf intf)
 {
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 7d323a763b54..70c04c282efc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -184,7 +184,7 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 	dump_hdr->data_length = cpu_to_le32(skb->len);
 	dump_hdr->chip_rt = cpu_to_le16(rt2x00dev->chip.rt);
 	dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf);
-	dump_hdr->chip_rev = cpu_to_le32(rt2x00dev->chip.rev);
+	dump_hdr->chip_rev = cpu_to_le16(rt2x00dev->chip.rev);
 	dump_hdr->type = cpu_to_le16(type);
 	dump_hdr->queue_index = desc->entry->queue->qid;
 	dump_hdr->entry_index = desc->entry->entry_idx;
@@ -573,7 +573,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name,
 	blob->data = data;
 	data += sprintf(data, "rt chip:\t%04x\n", intf->rt2x00dev->chip.rt);
 	data += sprintf(data, "rf chip:\t%04x\n", intf->rt2x00dev->chip.rf);
-	data += sprintf(data, "revision:\t%08x\n", intf->rt2x00dev->chip.rev);
+	data += sprintf(data, "revision:\t%04x\n", intf->rt2x00dev->chip.rev);
 	data += sprintf(data, "\n");
 	data += sprintf(data, "register\tbase\twords\twordsize\n");
 	data += sprintf(data, "csr\t%d\t%d\t%d\n",
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 4ca1d48fb737..ee9c696fe1d4 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1131,16 +1131,18 @@ dynamic_cca_tune:
  */
 static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 {
+	u16 chip;
 	char *fw_name;
 
-	switch (rt2x00dev->chip.rt) {
-	case RT2561:
+	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
+	switch (chip) {
+	case RT2561_PCI_ID:
 		fw_name = FIRMWARE_RT2561;
 		break;
-	case RT2561s:
+	case RT2561s_PCI_ID:
 		fw_name = FIRMWARE_RT2561s;
 		break;
-	case RT2661:
+	case RT2661_PCI_ID:
 		fw_name = FIRMWARE_RT2661;
 		break;
 	default:
@@ -2282,7 +2284,6 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
-	u16 chip;
 	u16 value;
 	u16 eeprom;
 
@@ -2291,17 +2292,13 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
-	/*
-	 * Identify RT chipset.
-	 */
-	pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
-
 	/*
 	 * Identify RF chipset.
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, chip, value, reg);
+	rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
+			value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
 
 	if (!rt2x00_rf(rt2x00dev, RF5225) &&
 	    !rt2x00_rf(rt2x00dev, RF5325) &&
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 6f33f7f5668c..ab20c7758824 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -27,6 +27,13 @@
 #ifndef RT61PCI_H
 #define RT61PCI_H
 
+/*
+ * RT chip PCI IDs.
+ */
+#define RT2561s_PCI_ID			0x0301
+#define RT2561_PCI_ID			0x0302
+#define RT2661_PCI_ID			0x0401
+
 /*
  * RF chip defines.
  */
@@ -225,6 +232,8 @@ struct hw_pairwise_ta_entry {
  * MAC_CSR0: ASIC revision number.
  */
 #define MAC_CSR0			0x3000
+#define MAC_CSR0_REVISION		FIELD32(0x0000000f)
+#define MAC_CSR0_CHIPSET		FIELD32(0x000ffff0)
 
 /*
  * MAC_CSR1: System control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 2950ac754921..f39a8ed17841 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1820,10 +1820,10 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
+	rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
+			value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
 
-	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0x25730) ||
-	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
+	if (!rt2x00_rt(rt2x00dev, RT2573) || (rt2x00_rev(rt2x00dev) == 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index e783a099a8f1..b4e3ddda06cf 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -142,6 +142,8 @@ struct hw_pairwise_ta_entry {
  * MAC_CSR0: ASIC revision number.
  */
 #define MAC_CSR0			0x3000
+#define MAC_CSR0_REVISION		FIELD32(0x0000000f)
+#define MAC_CSR0_CHIPSET		FIELD32(0x000ffff0)
 
 /*
  * MAC_CSR1: System control register.
-- 
cgit v1.2.3


From de1ebdceb6a4fe1b7073b81d273285b7c8bed312 Mon Sep 17 00:00:00 2001
From: Gertjan van Wingerde <gwingerde@gmail.com>
Date: Sun, 14 Feb 2010 12:52:05 +0100
Subject: rt2x00: rt2800 - Make rt30xx and rt35xx chipsets configurable.

Support for rt30xx- and rt35xx-based devices is currently not functional
in rt2800pci and rt2800usb.
In order to not confuse users we shouldn't claim the PCI and USB device
ID's for these devices. However, to allow for testing it is good to still
have them available, although disabled by default.
Make support for these device configuration options that default to off.

For rt2800usb a 3rd class of devices is added, which are the unknown
devices. For these devices it is known that they are either based on
rt28xx, rt30xx or rt35xx, but it is not known on what chipset exactly.
These devices are disabled by default as well, until it can be established
on what chipset exactly they are based.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/Kconfig     |  67 +++++++-
 drivers/net/wireless/rt2x00/rt2800pci.c |  20 ++-
 drivers/net/wireless/rt2x00/rt2800usb.c | 286 ++++++++++++++++++++------------
 3 files changed, 258 insertions(+), 115 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 3ca824a91ad9..5239e082cd0f 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -64,7 +64,7 @@ config RT2800PCI_SOC
 	default y
 
 config RT2800PCI
-	tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)"
+	tristate "Ralink rt28xx/rt30xx/rt35xx (PCI/PCIe/PCMCIA) support (EXPERIMENTAL)"
 	depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
 	select RT2800_LIB
 	select RT2X00_LIB_PCI if RT2800PCI_PCI
@@ -75,7 +75,7 @@ config RT2800PCI
 	select CRC_CCITT
 	select EEPROM_93CX6
 	---help---
-	  This adds support for rt2800 wireless chipset family.
+	  This adds support for rt2800/rt3000/rt3500 wireless chipset family.
 	  Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
 
 	  This driver is non-functional at the moment and is intended for
@@ -83,6 +83,32 @@ config RT2800PCI
 
 	  When compiled as a module, this driver will be called "rt2800pci.ko".
 
+if RT2800PCI
+
+config RT2800PCI_RT30XX
+	bool "rt2800pci - Include support for rt30xx (PCI/PCIe/PCMCIA) devices"
+	default n
+	---help---
+	  This adds support for rt30xx wireless chipset family to the
+	  rt2800pci driver.
+	  Supported chips: RT3090, RT3091 & RT3092
+
+	  Support for these devices is non-functional at the moment and is
+	  intended for testers and developers.
+
+config RT2800PCI_RT35XX
+	bool "rt2800pci - Include support for rt35xx (PCI/PCIe/PCMCIA) devices"
+	default n
+	---help---
+	  This adds support for rt35xx wireless chipset family to the
+	  rt2800pci driver.
+	  Supported chips: RT3060, RT3062, RT3562, RT3592
+
+	  Support for these devices is non-functional at the moment and is
+	  intended for testers and developers.
+
+endif
+
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
 	depends on USB
@@ -126,6 +152,43 @@ config RT2800USB
 
 	  When compiled as a module, this driver will be called "rt2800usb.ko".
 
+if RT2800USB
+
+config RT2800USB_RT30XX
+	bool "rt2800usb - Include support for rt30xx (USB) devices"
+	default n
+	---help---
+	  This adds support for rt30xx wireless chipset family to the
+	  rt2800usb driver.
+	  Supported chips: RT3070, RT3071 & RT3072
+
+	  Support for these devices is non-functional at the moment and is
+	  intended for testers and developers.
+
+config RT2800USB_RT35XX
+	bool "rt2800usb - Include support for rt35xx (USB) devices"
+	default n
+	---help---
+	  This adds support for rt35xx wireless chipset family to the
+	  rt2800usb driver.
+	  Supported chips: RT3572
+
+	  Support for these devices is non-functional at the moment and is
+	  intended for testers and developers.
+
+config RT2800USB_UNKNOWN
+	bool "rt2800usb - Include support for unknown (USB) devices"
+	default n
+	---help---
+	  This adds support for rt2800 family devices that are known to
+	  have a rt2800 family chipset, but for which the exact chipset
+	  is unknown.
+
+	  Support status for these devices is unknown, and enabling these
+	  devices may or may not work.
+
+endif
+
 config RT2800_LIB
 	tristate
 
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index fc351052229b..0e4c41766edc 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1185,7 +1185,10 @@ static const struct rt2x00_ops rt2800pci_ops = {
  * RT2800pci module information.
  */
 static struct pci_device_id rt2800pci_device_table[] = {
-	{ PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -1193,18 +1196,19 @@ static struct pci_device_id rt2800pci_device_table[] = {
 	{ PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+#ifdef CONFIG_RT2800PCI_RT30XX
 	{ PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
+#endif
+#ifdef CONFIG_RT2800PCI_RT35XX
+	{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+#endif
 	{ 0, }
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 79ea3798d597..5e4ee2023fcf 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -805,51 +805,27 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* Abocom */
 	{ USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* AirTies */
-	{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Amigo */
-	{ USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Amit */
 	{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Askey */
 	{ USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* ASUS */
 	{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* AzureWave */
 	{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Belkin */
 	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Cisco */
-	{ USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -858,157 +834,257 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* D-Link */
 	{ USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Gigabyte */
+	{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Hawking */
+	{ USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Linksys */
+	{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Logitec */
+	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Motorola */
+	{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* MSI */
+	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Planex */
+	{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ralink */
+	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Samsung */
+	{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Siemens */
+	{ USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sitecom */
+	{ USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* SMC */
+	{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sparklan */
+	{ USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sweex */
+	{ USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* U-Media*/
+	{ USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* ZCOM */
+	{ USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zinwell */
+	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zyxel */
+	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+#ifdef CONFIG_RT2800USB_RT30XX
+	/* Abocom */
+	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AirTies */
+	{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AzureWave */
+	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Conceptronic */
+	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Corega */
+	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* D-Link */
 	{ USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Edimax */
 	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Encore */
 	{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* EnGenius */
-	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Gigabyte */
+	{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* I-O DATA */
+	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* MSI */
+	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Pegatron */
+	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Planex */
+	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Quanta */
+	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ralink */
+	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sitecom */
+	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* SMC */
+	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zinwell */
+	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
+#endif
+#ifdef CONFIG_RT2800USB_RT35XX
+	/* Askey */
+	{ USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Cisco */
+	{ USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* I-O DATA */
+	{ USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ralink */
+	{ USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x8070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sitecom */
+	{ USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zinwell */
+	{ USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
+#endif
+#ifdef CONFIG_RT2800USB_UNKNOWN
+	/*
+	 * Unclear what kind of devices these are (they aren't supported by the
+	 * vendor driver).
+	 */
+	/* Allwin */
+	{ USB_DEVICE(0x8516, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Amigo */
+	{ USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Askey */
+	{ USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* ASUS */
+	{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1790), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1761, 0x0b05), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AzureWave */
+	{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Belkin */
+	{ USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0411, 0x0148), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0411, 0x0150), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0411, 0x015d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Conceptronic */
+	{ USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Corega */
+	{ USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* D-Link */
+	{ USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c16), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Encore */
+	{ USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* EnGenius */
 	{ USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Gemtek */
 	{ USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Gigabyte */
-	{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Hawking */
-	{ USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* I-O DATA */
-	{ USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* LevelOne */
 	{ USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Linksys */
-	{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0078), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Logitec */
-	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Motorola */
-	{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* MSI */
-	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3822), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3871), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x822a), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x871a), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Ovislink */
 	{ USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Para */
 	{ USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Pegatron */
+	{ USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Philips */
-	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Planex */
-	{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Qcom */
 	{ USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Quanta */
-	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Ralink */
-	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Samsung */
-	{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Siemens */
-	{ USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sitecom */
-	{ USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x004a), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x004d), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* SMC */
-	{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Sparklan */
-	{ USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xd522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sweex */
 	{ USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* U-Media*/
-	{ USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* ZCOM */
-	{ USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Zinwell */
-	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zyxel */
-	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
+#endif
 	{ 0, }
 };
 
-- 
cgit v1.2.3


From d41a5b7da223f7a80844fb3e948e8d5e6181f214 Mon Sep 17 00:00:00 2001
From: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Date: Fri, 12 Feb 2010 13:48:44 +0000
Subject: ixgbe: Cleanup incorrect header comments

The recent n-tuple patches added some comments to the headers
of the Flow Director functions that aren't accurate.  This
cleans them up, and is a purely cosmetic patch.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_82599.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 4fa8633fae3c..1f30e163bd9c 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1631,7 +1631,6 @@ static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
  *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
  *  @input: input stream to modify
  *  @vlan: the VLAN id to load
- *  @vlan_mask: bitwise mask for the VLAN
  **/
 s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
 {
@@ -1645,7 +1644,6 @@ s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
  *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
  *  @input: input stream to modify
  *  @src_addr: the IP address to load
- *  @src_addr_mask: bitwise mask for the source IP address
  **/
 s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
 {
@@ -1663,7 +1661,6 @@ s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
  *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
  *  @input: input stream to modify
  *  @dst_addr: the IP address to load
- *  @dst_addr_mask: bitwise mask for the destination IP address
  **/
 s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
 {
@@ -1767,7 +1764,6 @@ s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
  *  ixgbe_atr_set_src_port_82599 - Sets the source port
  *  @input: input stream to modify
  *  @src_port: the source port to load
- *  @src_port_mask: bitwise mask for the source port
  **/
 s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
 {
@@ -1781,7 +1777,6 @@ s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
  *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
  *  @input: input stream to modify
  *  @dst_port: the destination port to load
- *  @dst_port_mask: bitwise mask for the destination port
  **/
 s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
 {
-- 
cgit v1.2.3


From 38a8fc0fcf86f131f8bddf3787f9dfa7325bd981 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Sat, 13 Feb 2010 09:44:30 +0000
Subject: cxgb3: FIx VLAN over Jumbo frames

The mac is expected to auto-inflate the Maximum Frame size for VLAN
tagged frames. It however does not work with jumbo frames.
Work around the bug adding 4 to the Maximum Frame for MTUs
greater than 1536.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/xgmac.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c
index 0109ee4f2f91..0c08de5d09fd 100644
--- a/drivers/net/cxgb3/xgmac.c
+++ b/drivers/net/cxgb3/xgmac.c
@@ -353,6 +353,9 @@ int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu)
 	 * packet size register includes header, but not FCS.
 	 */
 	mtu += 14;
+	if (mtu > 1536)
+		mtu += 4;
+
 	if (mtu > MAX_FRAME_SIZE - 4)
 		return -EINVAL;
 	t3_write_reg(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset, mtu);
-- 
cgit v1.2.3


From e9449d85c67127d6f9d01aad8963d567ab02cb96 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Sat, 13 Feb 2010 09:44:35 +0000
Subject: cxgb3: fix link flap

The driver is expected to report that the link is up
when the phy Rx signal is established and the mac
has not detected a link fault.
The code is however broken, the driver does not check the link fault
status when the phy link status changes.
The link fault status being checked within a short period of time,
it leads to link up/link down events.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/t3_hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 032cfe065570..3ab9f51918aa 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1262,7 +1262,8 @@ void t3_link_changed(struct adapter *adapter, int port_id)
 		lc->fc = fc;
 	}
 
-	t3_os_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
+	t3_os_link_changed(adapter, port_id, link_ok && !pi->link_fault,
+			   speed, duplex, fc);
 }
 
 void t3_link_fault(struct adapter *adapter, int port_id)
-- 
cgit v1.2.3


From 564517e804c9c6d4e29c270bfc1517404d27107b Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 11 Feb 2010 05:55:39 +0000
Subject: net/macvtap: fix reference counting

The RCU usage in the original code was broken because
there are cases where we possibly sleep with rcu_read_lock
held. As a fix, change the macvtap_file_get_queue to
get a reference on the socket and the netdev instead of
taking the full rcu_read_lock.

Also, change macvtap_file_get_queue failure case to
not require a subsequent macvtap_file_put_queue, as
pointed out by Ed Swierk.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ed Swierk <eswierk@aristanetworks.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvtap.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index ad1f6ef89308..fe7656bf68c6 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -70,7 +70,8 @@ static struct cdev macvtap_cdev;
  * exists.
  *
  * The callbacks from macvlan are always done with rcu_read_lock held
- * already, while in the file_operations, we get it ourselves.
+ * already. For calls from file_operations, we use the rcu_read_lock_bh
+ * to get a reference count on the socket and the device.
  *
  * When destroying a queue, we remove the pointers from the file and
  * from the dev and then synchronize_rcu to make sure no thread is
@@ -159,13 +160,21 @@ static void macvtap_del_queues(struct net_device *dev)
 
 static inline struct macvtap_queue *macvtap_file_get_queue(struct file *file)
 {
+	struct macvtap_queue *q;
 	rcu_read_lock_bh();
-	return rcu_dereference(file->private_data);
+	q = rcu_dereference(file->private_data);
+	if (q) {
+		sock_hold(&q->sk);
+		dev_hold(q->vlan->dev);
+	}
+	rcu_read_unlock_bh();
+	return q;
 }
 
-static inline void macvtap_file_put_queue(void)
+static inline void macvtap_file_put_queue(struct macvtap_queue *q)
 {
-	rcu_read_unlock_bh();
+	sock_put(&q->sk);
+	dev_put(q->vlan->dev);
 }
 
 /*
@@ -314,8 +323,8 @@ static unsigned int macvtap_poll(struct file *file, poll_table * wait)
 	     sock_writeable(&q->sk)))
 		mask |= POLLOUT | POLLWRNORM;
 
+	macvtap_file_put_queue(q);
 out:
-	macvtap_file_put_queue();
 	return mask;
 }
 
@@ -366,8 +375,8 @@ static ssize_t macvtap_aio_write(struct kiocb *iocb, const struct iovec *iv,
 
 	result = macvtap_get_user(q, iv, iov_length(iv, count),
 			      file->f_flags & O_NONBLOCK);
+	macvtap_file_put_queue(q);
 out:
-	macvtap_file_put_queue();
 	return result;
 }
 
@@ -398,10 +407,8 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
 	struct sk_buff *skb;
 	ssize_t len, ret = 0;
 
-	if (!q) {
-		ret = -ENOLINK;
-		goto out;
-	}
+	if (!q)
+		return -ENOLINK;
 
 	len = iov_length(iv, count);
 	if (len < 0) {
@@ -437,7 +444,7 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
 	remove_wait_queue(q->sk.sk_sleep, &wait);
 
 out:
-	macvtap_file_put_queue();
+	macvtap_file_put_queue(q);
 	return ret;
 }
 
@@ -468,7 +475,7 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 		if (!q)
 			return -ENOLINK;
 		memcpy(devname, q->vlan->dev->name, sizeof(devname));
-		macvtap_file_put_queue();
+		macvtap_file_put_queue(q);
 
 		if (copy_to_user(&ifr->ifr_name, q->vlan->dev->name, IFNAMSIZ) ||
 		    put_user((TUN_TAP_DEV | TUN_NO_PI), &ifr->ifr_flags))
@@ -485,8 +492,10 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 			return -EFAULT;
 
 		q = macvtap_file_get_queue(file);
+		if (!q)
+			return -ENOLINK;
 		q->sk.sk_sndbuf = u;
-		macvtap_file_put_queue();
+		macvtap_file_put_queue(q);
 		return 0;
 
 	case TUNSETOFFLOAD:
-- 
cgit v1.2.3


From cf588477a3fbf085426e5c0b6205984ebb7e2187 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Sun, 14 Feb 2010 21:22:01 +0000
Subject: be2net: implement EEH pci error recovery handlers

The code has been tested on IBM pSeries server.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      |   1 +
 drivers/net/benet/be_cmds.c |  23 +++++++++-
 drivers/net/benet/be_main.c | 103 +++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 125 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index b39b38542623..5038c16bfe9b 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -265,6 +265,7 @@ struct be_adapter {
 	u32 if_handle;		/* Used to configure filtering */
 	u32 pmac_id;		/* MAC addr handle used by BE card */
 
+	bool eeh_err;
 	bool link_up;
 	u32 port_num;
 	bool promiscuous;
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index d1a0e5ede4b3..3397ee327e1f 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -167,7 +167,14 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
 	u32 ready;
 
 	do {
-		ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
+		ready = ioread32(db);
+		if (ready == 0xffffffff) {
+			dev_err(&adapter->pdev->dev,
+				"pci slot disconnected\n");
+			return -1;
+		}
+
+		ready &= MPU_MAILBOX_DB_RDY_MASK;
 		if (ready)
 			break;
 
@@ -198,6 +205,11 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
 	struct be_mcc_mailbox *mbox = mbox_mem->va;
 	struct be_mcc_compl *compl = &mbox->compl;
 
+	/* wait for ready to be set */
+	status = be_mbox_db_ready_wait(adapter, db);
+	if (status != 0)
+		return status;
+
 	val |= MPU_MAILBOX_DB_HI_MASK;
 	/* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
 	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
@@ -396,6 +408,9 @@ int be_cmd_fw_clean(struct be_adapter *adapter)
 	u8 *wrb;
 	int status;
 
+	if (adapter->eeh_err)
+		return -EIO;
+
 	spin_lock(&adapter->mbox_lock);
 
 	wrb = (u8 *)wrb_from_mbox(adapter);
@@ -768,6 +783,9 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 	u8 subsys = 0, opcode = 0;
 	int status;
 
+	if (adapter->eeh_err)
+		return -EIO;
+
 	spin_lock(&adapter->mbox_lock);
 
 	wrb = wrb_from_mbox(adapter);
@@ -856,6 +874,9 @@ int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
 	struct be_cmd_req_if_destroy *req;
 	int status;
 
+	if (adapter->eeh_err)
+		return -EIO;
+
 	spin_lock(&adapter->mbox_lock);
 
 	wrb = wrb_from_mbox(adapter);
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 92c55f679466..cbfaa3feb7c4 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -68,6 +68,9 @@ static void be_intr_set(struct be_adapter *adapter, bool enable)
 	u32 reg = ioread32(addr);
 	u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
 
+	if (adapter->eeh_err)
+		return;
+
 	if (!enabled && enable)
 		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
 	else if (enabled && !enable)
@@ -99,6 +102,10 @@ static void be_eq_notify(struct be_adapter *adapter, u16 qid,
 {
 	u32 val = 0;
 	val |= qid & DB_EQ_RING_ID_MASK;
+
+	if (adapter->eeh_err)
+		return;
+
 	if (arm)
 		val |= 1 << DB_EQ_REARM_SHIFT;
 	if (clear_int)
@@ -112,6 +119,10 @@ void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped)
 {
 	u32 val = 0;
 	val |= qid & DB_CQ_RING_ID_MASK;
+
+	if (adapter->eeh_err)
+		return;
+
 	if (arm)
 		val |= 1 << DB_CQ_REARM_SHIFT;
 	val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
@@ -2154,6 +2165,7 @@ static int be_ctrl_init(struct be_adapter *adapter)
 	spin_lock_init(&adapter->mcc_lock);
 	spin_lock_init(&adapter->mcc_cq_lock);
 
+	pci_save_state(adapter->pdev);
 	return 0;
 
 free_mbox:
@@ -2417,13 +2429,102 @@ static int be_resume(struct pci_dev *pdev)
 	return 0;
 }
 
+static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev,
+				pci_channel_state_t state)
+{
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev =  adapter->netdev;
+
+	dev_err(&adapter->pdev->dev, "EEH error detected\n");
+
+	adapter->eeh_err = true;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev)) {
+		rtnl_lock();
+		be_close(netdev);
+		rtnl_unlock();
+	}
+	be_clear(adapter);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	pci_disable_device(pdev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
+{
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	int status;
+
+	dev_info(&adapter->pdev->dev, "EEH reset\n");
+	adapter->eeh_err = false;
+
+	status = pci_enable_device(pdev);
+	if (status)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	pci_set_master(pdev);
+	pci_set_power_state(pdev, 0);
+	pci_restore_state(pdev);
+
+	/* Check if card is ok and fw is ready */
+	status = be_cmd_POST(adapter);
+	if (status)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void be_eeh_resume(struct pci_dev *pdev)
+{
+	int status = 0;
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev =  adapter->netdev;
+
+	dev_info(&adapter->pdev->dev, "EEH resume\n");
+
+	pci_save_state(pdev);
+
+	/* tell fw we're ready to fire cmds */
+	status = be_cmd_fw_init(adapter);
+	if (status)
+		goto err;
+
+	status = be_setup(adapter);
+	if (status)
+		goto err;
+
+	if (netif_running(netdev)) {
+		status = be_open(netdev);
+		if (status)
+			goto err;
+	}
+	netif_device_attach(netdev);
+	return;
+err:
+	dev_err(&adapter->pdev->dev, "EEH resume failed\n");
+	return;
+}
+
+static struct pci_error_handlers be_eeh_handlers = {
+	.error_detected = be_eeh_err_detected,
+	.slot_reset = be_eeh_reset,
+	.resume = be_eeh_resume,
+};
+
 static struct pci_driver be_driver = {
 	.name = DRV_NAME,
 	.id_table = be_dev_ids,
 	.probe = be_probe,
 	.remove = be_remove,
 	.suspend = be_suspend,
-	.resume = be_resume
+	.resume = be_resume,
+	.err_handler = &be_eeh_handlers
 };
 
 static int __init be_init_module(void)
-- 
cgit v1.2.3


From 5cdaaa12866e916d0ada8b56c5f0e543cfc7fe3d Mon Sep 17 00:00:00 2001
From: John Linn <john.linn@xilinx.com>
Date: Mon, 15 Feb 2010 21:51:00 -0800
Subject: net: emaclite: adding MDIO and phy lib support

These changes add MDIO and phy lib support to the driver as the
IP core now supports the MDIO bus.

The MDIO bus and phy are added as a child to the emaclite in the device
tree as illustrated below.

mdio {
	#address-cells = <1>;
	#size-cells = <0>;
	phy0: phy@7 {
		compatible = "marvell,88e1111";
		reg = <7>;
	} ;
}

Signed-off-by: Sadanand Mutyala <Sadanand.Mutyala@xilinx.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig           |   1 +
 drivers/net/xilinx_emaclite.c | 378 +++++++++++++++++++++++++++++++++++++-----
 2 files changed, 336 insertions(+), 43 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5f646523c5ae..b711d5416100 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1963,6 +1963,7 @@ config ATL2
 config XILINX_EMACLITE
 	tristate "Xilinx 10/100 Ethernet Lite support"
 	depends on PPC32 || MICROBLAZE
+	select PHYLIB
 	help
 	  This driver supports the 10/100 Ethernet Lite from Xilinx.
 
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index f7fe1aa03b42..1a74594224b1 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -22,11 +22,17 @@
 
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
 
 #define DRIVER_NAME "xilinx_emaclite"
 
 /* Register offsets for the EmacLite Core */
 #define XEL_TXBUFF_OFFSET 	0x0		/* Transmit Buffer */
+#define XEL_MDIOADDR_OFFSET	0x07E4		/* MDIO Address Register */
+#define XEL_MDIOWR_OFFSET	0x07E8		/* MDIO Write Data Register */
+#define XEL_MDIORD_OFFSET	0x07EC		/* MDIO Read Data Register */
+#define XEL_MDIOCTRL_OFFSET	0x07F0		/* MDIO Control Register */
 #define XEL_GIER_OFFSET		0x07F8		/* GIE Register */
 #define XEL_TSR_OFFSET		0x07FC		/* Tx status */
 #define XEL_TPLR_OFFSET		0x07F4		/* Tx packet length */
@@ -37,6 +43,22 @@
 
 #define XEL_BUFFER_OFFSET	0x0800		/* Next Tx/Rx buffer's offset */
 
+/* MDIO Address Register Bit Masks */
+#define XEL_MDIOADDR_REGADR_MASK  0x0000001F	/* Register Address */
+#define XEL_MDIOADDR_PHYADR_MASK  0x000003E0	/* PHY Address */
+#define XEL_MDIOADDR_PHYADR_SHIFT 5
+#define XEL_MDIOADDR_OP_MASK	  0x00000400	/* RD/WR Operation */
+
+/* MDIO Write Data Register Bit Masks */
+#define XEL_MDIOWR_WRDATA_MASK	  0x0000FFFF	/* Data to be Written */
+
+/* MDIO Read Data Register Bit Masks */
+#define XEL_MDIORD_RDDATA_MASK	  0x0000FFFF	/* Data to be Read */
+
+/* MDIO Control Register Bit Masks */
+#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001	/* MDIO Status Mask */
+#define XEL_MDIOCTRL_MDIOEN_MASK  0x00000008	/* MDIO Enable */
+
 /* Global Interrupt Enable Register (GIER) Bit Masks */
 #define XEL_GIER_GIE_MASK	0x80000000 	/* Global Enable */
 
@@ -87,6 +109,12 @@
  * @reset_lock:		lock used for synchronization
  * @deferred_skb:	holds an skb (for transmission at a later time) when the
  *			Tx buffer is not free
+ * @phy_dev:		pointer to the PHY device
+ * @phy_node:		pointer to the PHY device node
+ * @mii_bus:		pointer to the MII bus
+ * @mdio_irqs:		IRQs table for MDIO bus
+ * @last_link:		last link status
+ * @has_mdio:		indicates whether MDIO is included in the HW
  */
 struct net_local {
 
@@ -100,6 +128,15 @@ struct net_local {
 
 	spinlock_t reset_lock;
 	struct sk_buff *deferred_skb;
+
+	struct phy_device *phy_dev;
+	struct device_node *phy_node;
+
+	struct mii_bus *mii_bus;
+	int mdio_irqs[PHY_MAX_ADDR];
+
+	int last_link;
+	bool has_mdio;
 };
 
 
@@ -431,7 +468,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
 }
 
 /**
- * xemaclite_set_mac_address - Set the MAC address for this device
+ * xemaclite_update_address - Update the MAC address in the device
  * @drvdata:	Pointer to the Emaclite device private data
  * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value)
  *
@@ -441,8 +478,8 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
  * The MAC address can be programmed using any of the two transmit
  * buffers (if configured).
  */
-static void xemaclite_set_mac_address(struct net_local *drvdata,
-				      u8 *address_ptr)
+static void xemaclite_update_address(struct net_local *drvdata,
+				     u8 *address_ptr)
 {
 	void __iomem *addr;
 	u32 reg_data;
@@ -464,6 +501,30 @@ static void xemaclite_set_mac_address(struct net_local *drvdata,
 		;
 }
 
+/**
+ * xemaclite_set_mac_address - Set the MAC address for this device
+ * @dev:	Pointer to the network device instance
+ * @addr:	Void pointer to the sockaddr structure
+ *
+ * This function copies the HW address from the sockaddr strucutre to the
+ * net_device structure and updates the address in HW.
+ *
+ * Return:	Error if the net device is busy or 0 if the addr is set
+ *		successfully
+ */
+static int xemaclite_set_mac_address(struct net_device *dev, void *address)
+{
+	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct sockaddr *addr = address;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	xemaclite_update_address(lp, dev->dev_addr);
+	return 0;
+}
+
 /**
  * xemaclite_tx_timeout - Callback for Tx Timeout
  * @dev:	Pointer to the network device
@@ -641,12 +702,219 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/**********************/
+/* MDIO Bus functions */
+/**********************/
+
+/**
+ * xemaclite_mdio_wait - Wait for the MDIO to be ready to use
+ * @lp:		Pointer to the Emaclite device private data
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request.
+ *
+ * Return:	0 for success or ETIMEDOUT for a timeout
+ */
+
+static int xemaclite_mdio_wait(struct net_local *lp)
+{
+	long end = jiffies + 2;
+
+	/* wait for the MDIO interface to not be busy or timeout
+	   after some time.
+	*/
+	while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
+			XEL_MDIOCTRL_MDIOSTS_MASK) {
+		if (end - jiffies <= 0) {
+			WARN_ON(1);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+	return 0;
+}
+
+/**
+ * xemaclite_mdio_read - Read from a given MII management register
+ * @bus:	the mii_bus struct
+ * @phy_id:	the phy address
+ * @reg:	register number to read from
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request and then writes the phy address to the MDIO Address register
+ * and reads data from MDIO Read Data register, when its available.
+ *
+ * Return:	Value read from the MII management register
+ */
+static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct net_local *lp = bus->priv;
+	u32 ctrl_reg;
+	u32 rc;
+
+	if (xemaclite_mdio_wait(lp))
+		return -ETIMEDOUT;
+
+	/* Write the PHY address, register number and set the OP bit in the
+	 * MDIO Address register. Set the Status bit in the MDIO Control
+	 * register to start a MDIO read transaction.
+	 */
+	ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+	out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
+		 XEL_MDIOADDR_OP_MASK |
+		 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
+	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+		 ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+	if (xemaclite_mdio_wait(lp))
+		return -ETIMEDOUT;
+
+	rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
+
+	dev_dbg(&lp->ndev->dev,
+		"xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		phy_id, reg, rc);
+
+	return rc;
+}
+
+/**
+ * xemaclite_mdio_write - Write to a given MII management register
+ * @bus:	the mii_bus struct
+ * @phy_id:	the phy address
+ * @reg:	register number to write to
+ * @val:	value to write to the register number specified by reg
+ *
+ * This fucntion waits till the device is ready to accept a new MDIO
+ * request and then writes the val to the MDIO Write Data register.
+ */
+static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+				u16 val)
+{
+	struct net_local *lp = bus->priv;
+	u32 ctrl_reg;
+
+	dev_dbg(&lp->ndev->dev,
+		"xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		phy_id, reg, val);
+
+	if (xemaclite_mdio_wait(lp))
+		return -ETIMEDOUT;
+
+	/* Write the PHY address, register number and clear the OP bit in the
+	 * MDIO Address register and then write the value into the MDIO Write
+	 * Data register. Finally, set the Status bit in the MDIO Control
+	 * register to start a MDIO write transaction.
+	 */
+	ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+	out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
+		 ~XEL_MDIOADDR_OP_MASK &
+		 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
+	out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
+	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+		 ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+	return 0;
+}
+
+/**
+ * xemaclite_mdio_reset - Reset the mdio bus.
+ * @bus:	Pointer to the MII bus
+ *
+ * This function is required(?) as per Documentation/networking/phy.txt.
+ * There is no reset in this device; this function always returns 0.
+ */
+static int xemaclite_mdio_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+/**
+ * xemaclite_mdio_setup - Register mii_bus for the Emaclite device
+ * @lp:		Pointer to the Emaclite device private data
+ * @ofdev:	Pointer to OF device structure
+ *
+ * This function enables MDIO bus in the Emaclite device and registers a
+ * mii_bus.
+ *
+ * Return:	0 upon success or a negative error upon failure
+ */
+static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
+{
+	struct mii_bus *bus;
+	int rc;
+	struct resource res;
+	struct device_node *np = of_get_parent(lp->phy_node);
+
+	/* Don't register the MDIO bus if the phy_node or its parent node
+	 * can't be found.
+	 */
+	if (!np)
+		return -ENODEV;
+
+	/* Enable the MDIO bus by asserting the enable bit in MDIO Control
+	 * register.
+	 */
+	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+		 XEL_MDIOCTRL_MDIOEN_MASK);
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return -ENOMEM;
+
+	of_address_to_resource(np, 0, &res);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+		 (unsigned long long)res.start);
+	bus->priv = lp;
+	bus->name = "Xilinx Emaclite MDIO";
+	bus->read = xemaclite_mdio_read;
+	bus->write = xemaclite_mdio_write;
+	bus->reset = xemaclite_mdio_reset;
+	bus->parent = dev;
+	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+	lp->mii_bus = bus;
+
+	rc = of_mdiobus_register(bus, np);
+	if (rc)
+		goto err_register;
+
+	return 0;
+
+err_register:
+	mdiobus_free(bus);
+	return rc;
+}
+
+/**
+ * xemaclite_adjust_link - Link state callback for the Emaclite device
+ * @ndev: pointer to net_device struct
+ *
+ * There's nothing in the Emaclite device to be configured when the link
+ * state changes. We just print the status.
+ */
+void xemaclite_adjust_link(struct net_device *ndev)
+{
+	struct net_local *lp = netdev_priv(ndev);
+	struct phy_device *phy = lp->phy_dev;
+	int link_state;
+
+	/* hash together the state values to decide if something has changed */
+	link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+	if (lp->last_link != link_state) {
+		lp->last_link = link_state;
+		phy_print_status(phy);
+	}
+}
+
 /**
  * xemaclite_open - Open the network device
  * @dev:	Pointer to the network device
  *
  * This function sets the MAC address, requests an IRQ and enables interrupts
  * for the Emaclite device and starts the Tx queue.
+ * It also connects to the phy device, if MDIO is included in Emaclite device.
  */
 static int xemaclite_open(struct net_device *dev)
 {
@@ -656,14 +924,47 @@ static int xemaclite_open(struct net_device *dev)
 	/* Just to be safe, stop the device first */
 	xemaclite_disable_interrupts(lp);
 
+	if (lp->phy_node) {
+		u32 bmcr;
+
+		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     xemaclite_adjust_link, 0,
+					     PHY_INTERFACE_MODE_MII);
+		if (!lp->phy_dev) {
+			dev_err(&lp->ndev->dev, "of_phy_connect() failed\n");
+			return -ENODEV;
+		}
+
+		/* EmacLite doesn't support giga-bit speeds */
+		lp->phy_dev->supported &= (PHY_BASIC_FEATURES);
+		lp->phy_dev->advertising = lp->phy_dev->supported;
+
+		/* Don't advertise 1000BASE-T Full/Half duplex speeds */
+		phy_write(lp->phy_dev, MII_CTRL1000, 0);
+
+		/* Advertise only 10 and 100mbps full/half duplex speeds */
+		phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL);
+
+		/* Restart auto negotiation */
+		bmcr = phy_read(lp->phy_dev, MII_BMCR);
+		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+		phy_write(lp->phy_dev, MII_BMCR, bmcr);
+
+		phy_start(lp->phy_dev);
+	}
+
 	/* Set the MAC address each time opened */
-	xemaclite_set_mac_address(lp, dev->dev_addr);
+	xemaclite_update_address(lp, dev->dev_addr);
 
 	/* Grab the IRQ */
 	retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev);
 	if (retval) {
 		dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n",
 			dev->irq);
+		if (lp->phy_dev)
+			phy_disconnect(lp->phy_dev);
+		lp->phy_dev = NULL;
+
 		return retval;
 	}
 
@@ -682,6 +983,7 @@ static int xemaclite_open(struct net_device *dev)
  *
  * This function stops the Tx queue, disables interrupts and frees the IRQ for
  * the Emaclite device.
+ * It also disconnects the phy device associated with the Emaclite device.
  */
 static int xemaclite_close(struct net_device *dev)
 {
@@ -691,6 +993,10 @@ static int xemaclite_close(struct net_device *dev)
 	xemaclite_disable_interrupts(lp);
 	free_irq(dev->irq, dev);
 
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+
 	return 0;
 }
 
@@ -753,42 +1059,6 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 	return 0;
 }
 
-/**
- * xemaclite_ioctl - Perform IO Control operations on the network device
- * @dev:	Pointer to the network device
- * @rq:		Pointer to the interface request structure
- * @cmd:	IOCTL command
- *
- * The only IOCTL operation supported by this function is setting the MAC
- * address. An error is reported if any other operations are requested.
- *
- * Return:	0 to indicate success, or a negative error for failure.
- */
-static int xemaclite_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
-	struct hw_addr_data *hw_addr = (struct hw_addr_data *) &rq->ifr_hwaddr;
-
-	switch (cmd) {
-	case SIOCETHTOOL:
-		return -EIO;
-
-	case SIOCSIFHWADDR:
-		dev_err(&lp->ndev->dev, "SIOCSIFHWADDR\n");
-
-		/* Copy MAC address in from user space */
-		copy_from_user((void __force *) dev->dev_addr,
-			       (void __user __force *) hw_addr,
-			       IFHWADDRLEN);
-		xemaclite_set_mac_address(lp, dev->dev_addr);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
-
 /**
  * xemaclite_remove_ndev - Free the network device
  * @ndev:	Pointer to the network device to be freed
@@ -840,6 +1110,8 @@ static struct net_device_ops xemaclite_netdev_ops;
  * This function probes for the Emaclite device in the device tree.
  * It initializes the driver data structure and the hardware, sets the MAC
  * address and registers the network device.
+ * It also registers a mii_bus for the Emaclite device, if MDIO is included
+ * in the device.
  *
  * Return:	0, if the driver is bound to the Emaclite device, or
  *		a negative error if there is failure.
@@ -880,6 +1152,7 @@ static int __devinit xemaclite_of_probe(struct of_device *ofdev,
 	}
 
 	dev_set_drvdata(dev, ndev);
+	SET_NETDEV_DEV(ndev, &ofdev->dev);
 
 	ndev->irq = r_irq.start;
 	ndev->mem_start = r_mem.start;
@@ -923,7 +1196,12 @@ static int __devinit xemaclite_of_probe(struct of_device *ofdev,
 	out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
 
 	/* Set the MAC address in the EmacLite device */
-	xemaclite_set_mac_address(lp, ndev->dev_addr);
+	xemaclite_update_address(lp, ndev->dev_addr);
+
+	lp->phy_node = of_parse_phandle(ofdev->node, "phy-handle", 0);
+	rc = xemaclite_mdio_setup(lp, &ofdev->dev);
+	if (rc)
+		dev_warn(&ofdev->dev, "error registering MDIO bus\n");
 
 	dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr);
 
@@ -968,12 +1246,25 @@ static int __devexit xemaclite_of_remove(struct of_device *of_dev)
 	struct device *dev = &of_dev->dev;
 	struct net_device *ndev = dev_get_drvdata(dev);
 
+	struct net_local *lp = (struct net_local *) netdev_priv(ndev);
+
+	/* Un-register the mii_bus, if configured */
+	if (lp->has_mdio) {
+		mdiobus_unregister(lp->mii_bus);
+		kfree(lp->mii_bus->irq);
+		mdiobus_free(lp->mii_bus);
+		lp->mii_bus = NULL;
+	}
+
 	unregister_netdev(ndev);
 
+	if (lp->phy_node)
+		of_node_put(lp->phy_node);
+	lp->phy_node = NULL;
+
 	release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1);
 
 	xemaclite_remove_ndev(ndev);
-
 	dev_set_drvdata(dev, NULL);
 
 	return 0;
@@ -983,7 +1274,7 @@ static struct net_device_ops xemaclite_netdev_ops = {
 	.ndo_open		= xemaclite_open,
 	.ndo_stop		= xemaclite_close,
 	.ndo_start_xmit		= xemaclite_send,
-	.ndo_do_ioctl		= xemaclite_ioctl,
+	.ndo_set_mac_address	= xemaclite_set_mac_address,
 	.ndo_tx_timeout		= xemaclite_tx_timeout,
 	.ndo_get_stats		= xemaclite_get_stats,
 };
@@ -995,6 +1286,7 @@ static struct of_device_id xemaclite_of_match[] __devinitdata = {
 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(of, xemaclite_of_match);
-- 
cgit v1.2.3


From a626e8478b18de4fdee0e6d13975cea2b23efea5 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 11 Feb 2010 04:13:49 +0000
Subject: ixgbe: Fix - Do not allow Rx FC on 82598 at 1G due to errata

The 82598 has an erratum that receipt of pause frames at 1G
could lead to a Tx Hang.  To avoid this this patch disables
Rx FC while at 1G speed for all 82598 parts.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_82598.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 3103f4165311..35a06b47587b 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -357,12 +357,34 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	u32 fctrl_reg;
 	u32 rmcs_reg;
 	u32 reg;
+	u32 link_speed = 0;
+	bool link_up;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc)
 		goto out;
 
 #endif /* CONFIG_DCB */
+	/*
+	 * On 82598 having Rx FC on causes resets while doing 1G
+	 * so if it's on turn it off once we know link_speed. For
+	 * more details see 82598 Specification update.
+	 */
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+		switch (hw->fc.requested_mode) {
+		case ixgbe_fc_full:
+			hw->fc.requested_mode = ixgbe_fc_tx_pause;
+			break;
+		case ixgbe_fc_rx_pause:
+			hw->fc.requested_mode = ixgbe_fc_none;
+			break;
+		default:
+			/* no change */
+			break;
+		}
+	}
+
 	/* Negotiate the fc mode to use */
 	ret_val = ixgbe_fc_autoneg(hw);
 	if (ret_val)
-- 
cgit v1.2.3


From e86bff0edaa514a63ecd80e1ed2b3472b2507880 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Thu, 11 Feb 2010 04:14:08 +0000
Subject: ixgbe: fix WOL register setup for 82599

We need to have the WUS register set to all 1's in order for the hardware
to be capable of ever waking up.  Set it here in the ixgbe_probe().

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7b7c8486c0bf..951b73cf5ca2 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5763,6 +5763,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_sw_init;
 
+	/* Make it possible the adapter to be woken up via WOL */
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
 	/*
 	 * If there is a fan on this device and it has failed log the
 	 * failure.
-- 
cgit v1.2.3


From 04662360854aefcb6337d93701892ad97411fdd0 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Sat, 13 Feb 2010 22:13:06 -0500
Subject: mwl8k: disable softirqs when accessing sta_notify_list

Use spin_[un]lock_bh in mwl8k_sta_notify().  The sta_notify handler is
required to be atomic, yet it can be called in process context, so make
sure one call won't preempt another.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 0cfdb9db66f7..6497c841fb21 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3784,9 +3784,9 @@ mwl8k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		s->cmd = cmd;
 		s->sta = *sta;
 
-		spin_lock(&priv->sta_notify_list_lock);
+		spin_lock_bh(&priv->sta_notify_list_lock);
 		list_add_tail(&s->list, &priv->sta_notify_list);
-		spin_unlock(&priv->sta_notify_list_lock);
+		spin_unlock_bh(&priv->sta_notify_list_lock);
 
 		ieee80211_queue_work(hw, &priv->sta_notify_worker);
 	}
-- 
cgit v1.2.3


From 64b84010f9f85996a219fcc697396e7e11be3459 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Tue, 16 Feb 2010 17:56:18 +0200
Subject: ath9k: Use the Beacon TX rate from mac80211

Instead of hardcoding the lowest rate for Beacon frames, use the rate
index specified in the mac80211 TX info in AP mode.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index d088ebfe63a6..42171d043c31 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -62,7 +62,7 @@ int ath_beaconq_config(struct ath_softc *sc)
  *  Beacons are always sent out at the lowest rate, and are not retried.
 */
 static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
-			     struct ath_buf *bf)
+			     struct ath_buf *bf, int rateidx)
 {
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ath_hw *ah = sc->sc_ah;
@@ -96,9 +96,9 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
 	ds->ds_data = bf->bf_buf_addr;
 
 	sband = &sc->sbands[common->hw->conf.channel->band];
-	rate = sband->bitrates[0].hw_value;
+	rate = sband->bitrates[rateidx].hw_value;
 	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
-		rate |= sband->bitrates[0].hw_value_short;
+		rate |= sband->bitrates[rateidx].hw_value_short;
 
 	ath9k_hw_set11n_txdesc(ah, ds, skb->len + FCS_LEN,
 			       ATH9K_PKT_TYPE_BEACON,
@@ -206,7 +206,7 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 		}
 	}
 
-	ath_beacon_setup(sc, avp, bf);
+	ath_beacon_setup(sc, avp, bf, info->control.rates[0].idx);
 
 	while (skb) {
 		ath_tx_cabq(hw, skb);
@@ -237,7 +237,7 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc,
 	bf = avp->av_bcbuf;
 	skb = bf->bf_mpdu;
 
-	ath_beacon_setup(sc, avp, bf);
+	ath_beacon_setup(sc, avp, bf, 0);
 
 	/* NB: caller is known to have already stopped tx dma */
 	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
-- 
cgit v1.2.3


From 07793d33b4fba00f5bd1dac78fa038bb0e23fa5c Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Tue, 16 Feb 2010 00:18:46 +0000
Subject: be2net: set proper value to version field in req hdr

Before sending a command to the ASIC, set version properly.
This is necessary for the ARM firmware to send correct data to the driver.
This also fixes a bug in certain skews of the ASIC where the statistics
are misreported.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_cmds.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index fee6eee7ae5b..006cb2efcd22 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -296,6 +296,7 @@ static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
 	req_hdr->opcode = opcode;
 	req_hdr->subsystem = subsystem;
 	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+	req_hdr->version = 0;
 }
 
 static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
-- 
cgit v1.2.3


From 496c185c9495629ef1c65387cb2594578393cfe0 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Tue, 16 Feb 2010 15:16:45 -0800
Subject: atl1c: Add support for Atheros AR8152 and AR8152

AR8151 is a Gigabit Ethernet device. AR8152 devices are
Fast Ethernet devices, there are two revisions, a 1.0
and a 2.0 revision.

This has been tested against these devices:

Driver	Model-name	vendor:device	Type
atl1c 	AR8131		1969:1063	Gigabit Ethernet
atl1c	AR8132		1969:1062	Fast Ethernet
atl1c	AR8151(v1.0)	1969:1073	Gigabit Ethernet
atl1c	AR8152(v1.1)	1969:2060	Fast Ethernet

This device has no hardware available yet so it goes untested,
but it should work:

atl1c	AR8152(v2.0)	1969:2062	Fast Ethernet

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/atl1c/atl1c.h         |  11 +++-
 drivers/net/atl1c/atl1c_ethtool.c |   2 +-
 drivers/net/atl1c/atl1c_hw.c      |  83 +++++++++++++++++++++++----
 drivers/net/atl1c/atl1c_hw.h      |   5 ++
 drivers/net/atl1c/atl1c_main.c    | 115 ++++++++++++++++++++++++++++++++++----
 5 files changed, 191 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index efe5435bc3d3..84ae905bf732 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -313,6 +313,9 @@ enum atl1c_rss_type {
 enum atl1c_nic_type {
 	athr_l1c = 0,
 	athr_l2c = 1,
+	athr_l2c_b,
+	athr_l2c_b2,
+	athr_l1d,
 };
 
 enum atl1c_trans_queue {
@@ -426,8 +429,12 @@ struct atl1c_hw {
 #define ATL1C_ASPM_L1_SUPPORT		0x0100
 #define ATL1C_ASPM_CTRL_MON		0x0200
 #define ATL1C_HIB_DISABLE		0x0400
-#define ATL1C_LINK_CAP_1000M		0x0800
-#define ATL1C_FPGA_VERSION		0x8000
+#define ATL1C_APS_MODE_ENABLE           0x0800
+#define ATL1C_LINK_EXT_SYNC             0x1000
+#define ATL1C_CLK_GATING_EN             0x2000
+#define ATL1C_FPGA_VERSION              0x8000
+	u16 link_cap_flags;
+#define ATL1C_LINK_CAP_1000M		0x0001
 	u16 cmb_tpd;
 	u16 cmb_rrd;
 	u16 cmb_rx_timer; /* 2us resolution */
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index 9b1e0eaebb5c..61a0f2ff11e9 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -37,7 +37,7 @@ static int atl1c_get_settings(struct net_device *netdev,
 			   SUPPORTED_100baseT_Full |
 			   SUPPORTED_Autoneg       |
 			   SUPPORTED_TP);
-	if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M)
+	if (hw->link_cap_flags & ATL1C_LINK_CAP_1000M)
 		ecmd->supported |= SUPPORTED_1000baseT_Full;
 
 	ecmd->advertising = ADVERTISED_TP;
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c
index 3e69b940b8f7..f1389d664a21 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/atl1c/atl1c_hw.c
@@ -70,17 +70,39 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
 	u32 otp_ctrl_data;
 	u32 twsi_ctrl_data;
 	u8  eth_addr[ETH_ALEN];
+	u16 phy_data;
+	bool raise_vol = false;
 
 	/* init */
 	addr[0] = addr[1] = 0;
 	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
 	if (atl1c_check_eeprom_exist(hw)) {
-		/* Enable OTP CLK */
-		if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
-			otp_ctrl_data |= OTP_CTRL_CLK_EN;
-			AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
-			AT_WRITE_FLUSH(hw);
-			msleep(1);
+		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
+			/* Enable OTP CLK */
+			if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
+				otp_ctrl_data |= OTP_CTRL_CLK_EN;
+				AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+				AT_WRITE_FLUSH(hw);
+				msleep(1);
+			}
+		}
+
+		if (hw->nic_type == athr_l2c_b ||
+		    hw->nic_type == athr_l2c_b2 ||
+		    hw->nic_type == athr_l1d) {
+			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);
+			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
+				goto out;
+			phy_data &= 0xFF7F;
+			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
+
+			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
+			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
+				goto out;
+			phy_data |= 0x8;
+			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
+			udelay(20);
+			raise_vol = true;
 		}
 
 		AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
@@ -96,11 +118,31 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
 			return -1;
 	}
 	/* Disable OTP_CLK */
-	if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
-		otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
-		AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
-		AT_WRITE_FLUSH(hw);
-		msleep(1);
+	if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) {
+		if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
+			otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
+			AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+			AT_WRITE_FLUSH(hw);
+			msleep(1);
+		}
+	}
+	if (raise_vol) {
+		if (hw->nic_type == athr_l2c_b ||
+		    hw->nic_type == athr_l2c_b2 ||
+		    hw->nic_type == athr_l1d) {
+			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);
+			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
+				goto out;
+			phy_data |= 0x80;
+			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
+
+			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
+			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
+				goto out;
+			phy_data &= 0xFFF7;
+			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
+			udelay(20);
+		}
 	}
 
 	/* maybe MAC-address is from BIOS */
@@ -114,6 +156,7 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
 		return 0;
 	}
 
+out:
 	return -1;
 }
 
@@ -307,7 +350,7 @@ static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
 		mii_adv_data |= ADVERTISE_10HALF  | ADVERTISE_10FULL |
 				ADVERTISE_100HALF | ADVERTISE_100FULL;
 
-	if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) {
+	if (hw->link_cap_flags & ATL1C_LINK_CAP_1000M) {
 		if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half)
 			mii_giga_ctrl_data |= ADVERTISE_1000HALF;
 		if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full)
@@ -389,6 +432,7 @@ int atl1c_phy_reset(struct atl1c_hw *hw)
 {
 	struct atl1c_adapter *adapter = hw->adapter;
 	struct pci_dev *pdev = adapter->pdev;
+	u16 phy_data;
 	u32 phy_ctrl_data = GPHY_CTRL_DEFAULT;
 	u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN;
 	int err;
@@ -404,6 +448,21 @@ int atl1c_phy_reset(struct atl1c_hw *hw)
 	AT_WRITE_FLUSH(hw);
 	msleep(10);
 
+	if (hw->nic_type == athr_l2c_b) {
+		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x0A);
+		atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
+		atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xDFFF);
+	}
+
+	if (hw->nic_type == athr_l2c_b ||
+	    hw->nic_type == athr_l2c_b2 ||
+	    hw->nic_type == athr_l1d) {
+		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
+		atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
+		atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);
+		msleep(20);
+	}
+
 	/*Enable PHY LinkChange Interrupt */
 	err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
 	if (err) {
diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h
index c2c738df5c63..1eeb3ed9f0cb 100644
--- a/drivers/net/atl1c/atl1c_hw.h
+++ b/drivers/net/atl1c/atl1c_hw.h
@@ -57,6 +57,7 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
 #define REG_LINK_CTRL			0x68
 #define LINK_CTRL_L0S_EN		0x01
 #define LINK_CTRL_L1_EN			0x02
+#define LINK_CTRL_EXT_SYNC		0x80
 
 #define REG_VPD_CAP			0x6C
 #define VPD_CAP_ID_MASK                 0xff
@@ -156,6 +157,8 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
 #define PM_CTRL_PM_REQ_TIMER_SHIFT	20
 #define PM_CTRL_LCKDET_TIMER_MASK	0x3F
 #define PM_CTRL_LCKDET_TIMER_SHIFT	24
+#define PM_CTRL_EN_BUFS_RX_L0S		0x10000000
+#define PM_CTRL_SA_DLY_EN		0x20000000
 #define PM_CTRL_MAC_ASPM_CHK		0x40000000
 #define PM_CTRL_HOTRST			0x80000000
 
@@ -314,6 +317,8 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
 #define MAC_CTRL_BC_EN              	0x4000000
 #define MAC_CTRL_DBG                	0x8000000
 #define MAC_CTRL_SINGLE_PAUSE_EN	0x10000000
+#define MAC_CTRL_HASH_ALG_CRC32		0x20000000
+#define MAC_CTRL_SPEED_MODE_SW		0x40000000
 
 /* MAC IPG/IFG Control Register  */
 #define REG_MAC_IPG_IFG             	0x1484
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index d98095df05be..3d4c0a5a77eb 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -21,11 +21,18 @@
 
 #include "atl1c.h"
 
-#define ATL1C_DRV_VERSION "1.0.0.1-NAPI"
+#define ATL1C_DRV_VERSION "1.0.0.2-NAPI"
 char atl1c_driver_name[] = "atl1c";
 char atl1c_driver_version[] = ATL1C_DRV_VERSION;
 #define PCI_DEVICE_ID_ATTANSIC_L2C      0x1062
 #define PCI_DEVICE_ID_ATTANSIC_L1C      0x1063
+#define PCI_DEVICE_ID_ATHEROS_L2C_B	0x2060 /* AR8152 v1.1 Fast 10/100 */
+#define PCI_DEVICE_ID_ATHEROS_L2C_B2	0x2062 /* AR8152 v2.0 Fast 10/100 */
+#define PCI_DEVICE_ID_ATHEROS_L1D	0x1073 /* AR8151 v1.0 Gigabit 1000 */
+
+#define L2CB_V10			0xc0
+#define L2CB_V11			0xc1
+
 /*
  * atl1c_pci_tbl - PCI Device ID Table
  *
@@ -38,6 +45,9 @@ char atl1c_driver_version[] = ATL1C_DRV_VERSION;
 static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)},
 	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)},
 	/* required last entry */
 	{ 0 }
 };
@@ -593,11 +603,18 @@ static void atl1c_set_mac_type(struct atl1c_hw *hw)
 	case PCI_DEVICE_ID_ATTANSIC_L2C:
 		hw->nic_type = athr_l2c;
 		break;
-
 	case PCI_DEVICE_ID_ATTANSIC_L1C:
 		hw->nic_type = athr_l1c;
 		break;
-
+	case PCI_DEVICE_ID_ATHEROS_L2C_B:
+		hw->nic_type = athr_l2c_b;
+		break;
+	case PCI_DEVICE_ID_ATHEROS_L2C_B2:
+		hw->nic_type = athr_l2c_b2;
+		break;
+	case PCI_DEVICE_ID_ATHEROS_L1D:
+		hw->nic_type = athr_l1d;
+		break;
 	default:
 		break;
 	}
@@ -620,10 +637,13 @@ static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
 		hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT;
 	if (link_ctrl_data & LINK_CTRL_L1_EN)
 		hw->ctrl_flags |= ATL1C_ASPM_L1_SUPPORT;
+	if (link_ctrl_data & LINK_CTRL_EXT_SYNC)
+		hw->ctrl_flags |= ATL1C_LINK_EXT_SYNC;
 
-	if (hw->nic_type == athr_l1c) {
+	if (hw->nic_type == athr_l1c ||
+	    hw->nic_type == athr_l1d) {
 		hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON;
-		hw->ctrl_flags |= ATL1C_LINK_CAP_1000M;
+		hw->link_cap_flags |= ATL1C_LINK_CAP_1000M;
 	}
 	return 0;
 }
@@ -1234,21 +1254,92 @@ static void atl1c_disable_l0s_l1(struct atl1c_hw *hw)
 static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
 {
 	u32 pm_ctrl_data;
+	u32 link_ctrl_data;
 
 	AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
-
+	AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);
 	pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1;
+
 	pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
 			PM_CTRL_L1_ENTRY_TIMER_SHIFT);
+	pm_ctrl_data &= ~(PM_CTRL_LCKDET_TIMER_MASK <<
+			  PM_CTRL_LCKDET_TIMER_SHIFT);
 
 	pm_ctrl_data |= PM_CTRL_MAC_ASPM_CHK;
+	pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+	pm_ctrl_data |= PM_CTRL_RBER_EN;
+	pm_ctrl_data |= PM_CTRL_SDES_EN;
+
+	if (hw->nic_type == athr_l2c_b ||
+	    hw->nic_type == athr_l1d ||
+	    hw->nic_type == athr_l2c_b2) {
+		link_ctrl_data &= ~LINK_CTRL_EXT_SYNC;
+		if (!(hw->ctrl_flags & ATL1C_APS_MODE_ENABLE)) {
+			if (hw->nic_type == athr_l2c_b &&
+			    hw->revision_id == L2CB_V10)
+				link_ctrl_data |= LINK_CTRL_EXT_SYNC;
+		}
+
+		AT_WRITE_REG(hw, REG_LINK_CTRL, link_ctrl_data);
+
+		pm_ctrl_data |= PM_CTRL_PCIE_RECV;
+		pm_ctrl_data |= AT_ASPM_L1_TIMER << PM_CTRL_PM_REQ_TIMER_SHIFT;
+		pm_ctrl_data &= ~PM_CTRL_EN_BUFS_RX_L0S;
+		pm_ctrl_data &= ~PM_CTRL_SA_DLY_EN;
+		pm_ctrl_data &= ~PM_CTRL_HOTRST;
+		pm_ctrl_data |= 1 << PM_CTRL_L1_ENTRY_TIMER_SHIFT;
+		pm_ctrl_data |= PM_CTRL_SERDES_PD_EX_L1;
+	}
 
 	if (linkup) {
-		pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
-		pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
+		pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+		pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+		if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT)
+			pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
+		if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT)
+			pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN;
+
+		if (hw->nic_type == athr_l2c_b ||
+		    hw->nic_type == athr_l1d ||
+		    hw->nic_type == athr_l2c_b2) {
+			if (hw->nic_type == athr_l2c_b)
+				if (!(hw->ctrl_flags & ATL1C_APS_MODE_ENABLE))
+					pm_ctrl_data &= PM_CTRL_ASPM_L0S_EN;
+			pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN;
+			pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN;
+			pm_ctrl_data &= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
+			pm_ctrl_data |= PM_CTRL_CLK_SWH_L1;
+			if (hw->adapter->link_speed == SPEED_100 ||
+			    hw->adapter->link_speed == SPEED_1000) {
+				pm_ctrl_data &=
+					~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
+					  PM_CTRL_L1_ENTRY_TIMER_SHIFT);
+				if (hw->nic_type == athr_l1d)
+					pm_ctrl_data |= 0xF <<
+						PM_CTRL_L1_ENTRY_TIMER_SHIFT;
+				else
+					pm_ctrl_data |= 7 <<
+						PM_CTRL_L1_ENTRY_TIMER_SHIFT;
+			}
+		} else {
+			pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
+			pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
+			pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
+			pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
+			pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+			pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+		}
+		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
+		if (hw->adapter->link_speed == SPEED_10)
+			if (hw->nic_type == athr_l1d)
+				atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0xB69D);
+			else
+				atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD);
+		else if (hw->adapter->link_speed == SPEED_100)
+			atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB2DD);
+		else
+			atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x96DD);
 
-		pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
-		pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
 	} else {
 		pm_ctrl_data &= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
 		pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN;
@@ -1302,6 +1393,10 @@ static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter)
 		mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
 
 	mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN;
+	if (hw->nic_type == athr_l1d || hw->nic_type == athr_l2c_b2) {
+		mac_ctrl_data |= MAC_CTRL_SPEED_MODE_SW;
+		mac_ctrl_data |= MAC_CTRL_HASH_ALG_CRC32;
+	}
 	AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
 }
 
-- 
cgit v1.2.3


From efde73a35c2fc88db26a1583b19e0ab0fdfcd4f8 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Mon, 15 Feb 2010 19:42:07 +0000
Subject: bnx2: Check BNX2_FLAG_USING_MSIX flag when setting up MSIX.

Checking the flag is more correct than checking bp->irq_nvecs. By
accident it is not a problem because we always have more than 1
vectors when using MSIX mode.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index c7f5515ddaa4..48bc57803856 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -4940,7 +4940,7 @@ bnx2_init_chip(struct bnx2 *bp)
 		      BNX2_HC_CONFIG_COLLECT_STATS;
 	}
 
-	if (bp->irq_nvecs > 1) {
+	if (bp->flags & BNX2_FLAG_USING_MSIX) {
 		REG_WR(bp, BNX2_HC_MSIX_BIT_VECTOR,
 		       BNX2_HC_MSIX_BIT_VECTOR_VAL);
 
-- 
cgit v1.2.3


From e9f26c49ce790de0064474f97d6402ce1fefac2a Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Mon, 15 Feb 2010 19:42:08 +0000
Subject: bnx2: Need to call cnic_setup_cnic_irq_info() after MTU change.

New status blocks are allocated during MTU change so we need to
update this information for the cnic driver.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 48bc57803856..063f28394e3d 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7141,6 +7141,13 @@ bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx)
 			dev_close(bp->dev);
 			return rc;
 		}
+#ifdef BCM_CNIC
+		mutex_lock(&bp->cnic_lock);
+		/* Let cnic know about the new status block. */
+		if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD)
+			bnx2_setup_cnic_irq_info(bp);
+		mutex_unlock(&bp->cnic_lock);
+#endif
 		bnx2_netif_start(bp);
 	}
 	return 0;
-- 
cgit v1.2.3


From 5726026bfffa13e9b1098d7bc177618cbbaa9388 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Mon, 15 Feb 2010 19:42:09 +0000
Subject: bnx2: Adjust flow control water marks.

The current water marks are too high and can cause unnecessary flow
control frames.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 2 +-
 drivers/net/bnx2.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 063f28394e3d..dbe487f2915d 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1277,7 +1277,7 @@ bnx2_init_rx_context(struct bnx2 *bp, u32 cid)
 		if (lo_water >= bp->rx_ring_size)
 			lo_water = 0;
 
-		hi_water = bp->rx_ring_size / 4;
+		hi_water = min_t(int, bp->rx_ring_size / 4, lo_water + 16);
 
 		if (hi_water <= lo_water)
 			lo_water = 0;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index b860fbbff355..cd4b0e4637ab 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -349,7 +349,7 @@ struct l2_fhdr {
 #define BNX2_L2CTX_BD_PRE_READ				0x00000000
 #define BNX2_L2CTX_CTX_SIZE				0x00000000
 #define BNX2_L2CTX_CTX_TYPE				0x00000000
-#define BNX2_L2CTX_LO_WATER_MARK_DEFAULT		 32
+#define BNX2_L2CTX_LO_WATER_MARK_DEFAULT		 4
 #define BNX2_L2CTX_LO_WATER_MARK_SCALE			 4
 #define BNX2_L2CTX_LO_WATER_MARK_DIS			 0
 #define BNX2_L2CTX_HI_WATER_MARK_SHIFT			 4
-- 
cgit v1.2.3


From beb499afe3c9c006bb2d66ceaff0f354d0405ff4 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Mon, 15 Feb 2010 19:42:10 +0000
Subject: bnx2: Allow user-specified multiple advertisement speed values.

Remove unnecessary code that works around older versions of ethtool
that can pass down invalid advertisement speed values.  This old
code prevents the user from specifying multiple advertisement values.
The new code uses simple masking to mask out invalid advertisment bits.

Reported-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 33 ++++++++-------------------------
 1 file changed, 8 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index dbe487f2915d..d1e5e5d9e986 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6751,32 +6751,15 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if (cmd->autoneg == AUTONEG_ENABLE) {
 		autoneg |= AUTONEG_SPEED;
 
-		cmd->advertising &= ETHTOOL_ALL_COPPER_SPEED;
-
-		/* allow advertising 1 speed */
-		if ((cmd->advertising == ADVERTISED_10baseT_Half) ||
-			(cmd->advertising == ADVERTISED_10baseT_Full) ||
-			(cmd->advertising == ADVERTISED_100baseT_Half) ||
-			(cmd->advertising == ADVERTISED_100baseT_Full)) {
-
-			if (cmd->port == PORT_FIBRE)
-				goto err_out_unlock;
-
-			advertising = cmd->advertising;
-
-		} else if (cmd->advertising == ADVERTISED_2500baseX_Full) {
-			if (!(bp->phy_flags & BNX2_PHY_FLAG_2_5G_CAPABLE) ||
-			    (cmd->port == PORT_TP))
-				goto err_out_unlock;
-		} else if (cmd->advertising == ADVERTISED_1000baseT_Full)
-			advertising = cmd->advertising;
-		else if (cmd->advertising == ADVERTISED_1000baseT_Half)
-			goto err_out_unlock;
-		else {
-			if (cmd->port == PORT_FIBRE)
-				advertising = ETHTOOL_ALL_FIBRE_SPEED;
-			else
+		advertising = cmd->advertising;
+		if (cmd->port == PORT_TP) {
+			advertising &= ETHTOOL_ALL_COPPER_SPEED;
+			if (!advertising)
 				advertising = ETHTOOL_ALL_COPPER_SPEED;
+		} else {
+			advertising &= ETHTOOL_ALL_FIBRE_SPEED;
+			if (!advertising)
+				advertising = ETHTOOL_ALL_FIBRE_SPEED;
 		}
 		advertising |= ADVERTISED_Autoneg;
 	}
-- 
cgit v1.2.3


From c9885fe5a76dea798543f2938a872bc159e8e69a Mon Sep 17 00:00:00 2001
From: Patrick Rabau <pr2345@gmail.com>
Date: Mon, 15 Feb 2010 19:42:11 +0000
Subject: bnx2: Fix bug when saving statistics.

This fixes the problem of dropping the carry when adding 2 32-bit values.
Switch to use array indexing for better readability.

Reported by and fix provided by Patrick Rabau.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d1e5e5d9e986..3fb110edad49 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6555,16 +6555,16 @@ bnx2_save_stats(struct bnx2 *bp)
 		u32 hi;
 		u64 lo;
 
-		hi = *(temp_stats + i) + *(hw_stats + i);
-		lo = *(temp_stats + i + 1) + *(hw_stats + i + 1);
+		hi = temp_stats[i] + hw_stats[i];
+		lo = (u64) temp_stats[i + 1] + (u64) hw_stats[i + 1];
 		if (lo > 0xffffffff)
 			hi++;
-		*(temp_stats + i) = hi;
-		*(temp_stats + i + 1) = lo & 0xffffffff;
+		temp_stats[i] = hi;
+		temp_stats[i + 1] = lo & 0xffffffff;
 	}
 
 	for ( ; i < sizeof(struct statistics_block) / 4; i++)
-		*(temp_stats + i) = *(temp_stats + i) + *(hw_stats + i);
+		temp_stats[i] += hw_stats[i];
 }
 
 #define GET_64BIT_NET_STATS64(ctr)				\
-- 
cgit v1.2.3


From bec92044b73085ba92aabf973cb5aafc251f3a34 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Tue, 16 Feb 2010 15:19:42 -0800
Subject: bnx2: Update firmwares and update version to 2.0.8.

- Increase FTQ depth to 256 to ehnabce performance.
- Fix RV2P context corruption on 5709 when flow control is enabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c                             |   14 +-
 firmware/Makefile                              |    8 +-
 firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex    | 5841 -----------------------
 firmware/bnx2/bnx2-mips-06-5.0.0.j6.fw.ihex    | 5908 +++++++++++++++++++++++
 firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex    | 6051 -----------------------
 firmware/bnx2/bnx2-mips-09-5.0.0.j9.fw.ihex    | 6058 ++++++++++++++++++++++++
 firmware/bnx2/bnx2-rv2p-09-5.0.0.j10.fw.ihex   |  462 ++
 firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex    |  462 --
 firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw.ihex |  499 ++
 firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex  |  498 --
 10 files changed, 12938 insertions(+), 12863 deletions(-)
 delete mode 100644 firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex
 create mode 100644 firmware/bnx2/bnx2-mips-06-5.0.0.j6.fw.ihex
 delete mode 100644 firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex
 create mode 100644 firmware/bnx2/bnx2-mips-09-5.0.0.j9.fw.ihex
 create mode 100644 firmware/bnx2/bnx2-rv2p-09-5.0.0.j10.fw.ihex
 delete mode 100644 firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex
 create mode 100644 firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw.ihex
 delete mode 100644 firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 3fb110edad49..5f0dda10f20d 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1,6 +1,6 @@
 /* bnx2.c: Broadcom NX2 network driver.
  *
- * Copyright (c) 2004-2009 Broadcom Corporation
+ * Copyright (c) 2004-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -58,13 +58,13 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"2.0.3"
-#define DRV_MODULE_RELDATE	"Dec 03, 2009"
-#define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-5.0.0.j3.fw"
+#define DRV_MODULE_VERSION	"2.0.8"
+#define DRV_MODULE_RELDATE	"Feb 15, 2010"
+#define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-5.0.0.j6.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-5.0.0.j3.fw"
-#define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-5.0.0.j3.fw"
-#define FW_RV2P_FILE_09_Ax	"bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw"
-#define FW_RV2P_FILE_09		"bnx2/bnx2-rv2p-09-5.0.0.j3.fw"
+#define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-5.0.0.j9.fw"
+#define FW_RV2P_FILE_09_Ax	"bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw"
+#define FW_RV2P_FILE_09		"bnx2/bnx2-rv2p-09-5.0.0.j10.fw"
 
 #define RUN_AT(x) (jiffies + (x))
 
diff --git a/firmware/Makefile b/firmware/Makefile
index 1c00d05578f7..1c0be73c8082 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -33,10 +33,10 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
 fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.7.0.fw bnx2x-e1h-5.2.7.0.fw
-fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j3.fw \
-			     bnx2/bnx2-rv2p-09-5.0.0.j3.fw \
-			     bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw \
-			     bnx2/bnx2-mips-06-5.0.0.j3.fw \
+fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j9.fw \
+			     bnx2/bnx2-rv2p-09-5.0.0.j10.fw \
+			     bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw \
+			     bnx2/bnx2-mips-06-5.0.0.j6.fw \
 			     bnx2/bnx2-rv2p-06-5.0.0.j3.fw
 fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
diff --git a/firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex
deleted file mode 100644
index 652e6c8f37e1..000000000000
--- a/firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex
+++ /dev/null
@@ -1,5841 +0,0 @@
-:10000000080001100800000000004CC8000000C8F3
-:1000100000000000000000000000000008004CC8C4
-:100020000000001400004D90080000880800000047
-:10003000000058D000004DA408005A400000008481
-:100040000000A674080058D0000001540000A6F873
-:10005000080031D808000000000070F00000A84C33
-:10006000000000000000000000000000080070F028
-:10007000000000240001193C080004880800040066
-:100080000000175C00011960000000000000000083
-:100090000000000000000000000000000000000060
-:1000A000080000A80800000000003B38000130BC38
-:1000B0000000000000000000000000000000000040
-:0800C000000000000000000038
-:0800C8000A00004400000000E2
-:1000D000000000000000000D636F6D352E302E30E3
-:1000E0006A33000005000002000000000000000369
-:1000F00000000014000000320000000300000000B7
-:1001000000000000000000000000000000000000EF
-:1001100000000010000001360000EA600000000549
-:1001200000000000000000000000000000000008C7
-:1001300000000000000000000000000000000000BF
-:1001400000000000000000000000000000000000AF
-:10015000000000000000000000000000000000009F
-:10016000000000020000000000000000000000008D
-:10017000000000000000000000000000000000007F
-:10018000000000000000000000000010000000005F
-:10019000000000000000000000000000000000005F
-:1001A000000000000000000000000000000000004F
-:1001B000000000000000000000000000000000003F
-:1001C000000000000000000000000000000000002F
-:1001D000000000000000000000000000100000030C
-:1001E000000000000000000D0000000D3C020800AF
-:1001F00024424D003C03080024634DFCAC40000049
-:100200000043202B1480FFFD244200043C1D080005
-:1002100037BD7FFC03A0F0213C1008002610011020
-:100220003C1C0800279C4D000E000214000000003A
-:100230000000000D27BDFFE8AFBF0014AFB00010F5
-:100240009742010830437000240220001062000B26
-:10025000286220011440002F0000102124024000D9
-:1002600010620025000000002402600010620026D9
-:10027000000010210A0000948FBF001427500100D5
-:10028000920200091040001A240300013C020800F9
-:100290008C42002010400016000018210E00052B93
-:1002A00000000000960300083C06080094C64DBEFE
-:1002B0008E0400188F8200209605000C00031C009D
-:1002C00000661825AC440000AC450004240400017D
-:1002D000AC400008AC40000CAC400010AC40001436
-:1002E000AC4000180E000550AC43001C0000182163
-:1002F0000A000093006010210E0003BD0000000002
-:100300000A000093000010210E000F810000000081
-:10031000000010218FBF00148FB0001003E0000810
-:1003200027BD001827BDFFE0AFB00010AFBF001819
-:10033000AFB10014275001009203000B2402001AF1
-:10034000961100081462005B00002821322200018F
-:1003500010400008000000008E0200009603001408
-:10036000000211C200021040005A10210A0000DBF6
-:10037000A44300803C0208008C420020104000286A
-:10038000000000000E00052B00000000974201084D
-:100390009743010C8F8500203042003E3063FFFF01
-:1003A0000002140000431025ACA200008F4201009F
-:1003B0003C06080094C64DBEACA20004974301164B
-:1003C0009744010E3C02200000031C003084FFFF14
-:1003D00000641825ACA3000800C230259742011024
-:1003E0009743011224040001000214003063FFFF50
-:1003F00000431025ACA2000C974201143042FFFFCD
-:10040000ACA200108F420118ACA200149342010B61
-:10041000304200FFACA200180E000550ACA6001C34
-:100420003C0208008C420040244200013C010800CC
-:10043000AC2200403C0308008C63004432220002DE
-:1004400032240004246300013C010800AC23004472
-:10045000108000180002282B8F4202B804430008C5
-:100460008E0200203C0208008C4200602442000101
-:100470003C010800AC2200600A0000FB24050001DA
-:100480009603001600002821AF4202808E0200046D
-:10049000A7430284AF4202883C021000AF4202B878
-:1004A0003C0208008C42005C244200013C01080030
-:1004B000AC22005C8FBF00188FB100148FB0001009
-:1004C00000A0102103E0000827BD002027BDFFE0A9
-:1004D000AFB00010AFBF0018AFB10014275001003B
-:1004E0009203000B24020003961100081462006DB1
-:1004F000000020213222000110400008000000000E
-:100500008E02000096030014000211C20002104087
-:10051000005A10210A000142A44300803C02080056
-:100520008C42002010400025000000000E00052B2A
-:1005300000000000974201089743010C8F850020BE
-:100540003042003E3063FFFF0002140000431025DC
-:10055000ACA200008F4201003C06080094C64DBECC
-:10056000ACA20004974301169744010E3C02200000
-:1005700000031C003084FFFF00641825ACA30008B2
-:1005800000C2302597420110974301122404000154
-:10059000000214003063FFFF00431025ACA2000CE2
-:1005A000974201143042FFFFACA20010ACA000142F
-:1005B000ACA000180E000550ACA6001C3C020800C0
-:1005C0008C420040244200013C010800AC22004063
-:1005D0003C0208008C420044322300042442000103
-:1005E0003C010800AC2200441060001A32220002D4
-:1005F0008F4202B8044300088E0200203C0208002B
-:100600008C420060244200013C010800AC220060E2
-:100610000A0001772404000196030016000020213F
-:10062000AF4202808E020004A7430284AF420288D8
-:100630003C021000AF4202B83C0208008C42005C51
-:10064000244200013C010800AC22005C0A00017851
-:100650008FBF001810400013000020218F430104B9
-:100660003C026020AC4300148C420004240301FED1
-:10067000304203FF1443000B000020218F42010091
-:10068000000211C02442FFFC2C420008104000026E
-:100690002403000200031F403C026000AC436914C5
-:1006A000000020218FBF00188FB100148FB0001000
-:1006B0000080102103E0000827BD00208F430100C7
-:1006C0002402010050620003000311C20000000D6B
-:1006D000000311C200021040005A1021A440008003
-:1006E00003E00008000010219362000003E000080E
-:1006F000AF80000003E000080000102103E00008C4
-:1007000000001021240201001482000800000000F3
-:100710003C0208008C4200FC244200013C0108001D
-:10072000AC2200FC0A00019F30A200203C0208001D
-:100730008C420084244200013C010800AC22008469
-:1007400030A200201040000830A300103C02080036
-:100750008C420108244200013C010800AC2201083F
-:1007600003E0000800000000106000080000000026
-:100770003C0208008C420104244200013C010800B4
-:10078000AC22010403E00008000000003C02080065
-:100790008C420100244200013C010800AC2201000F
-:1007A00003E000080000000027BDFFE8AFBF001015
-:1007B0002744010094830008306200041040001BAD
-:1007C000306600028F4202B804410008240500018F
-:1007D0003C0208008C420060244200013C010800F9
-:1007E000AC2200600A0001EB8FBF00108C82002059
-:1007F0009483001600002821AF4202808C820004FE
-:10080000A7430284AF4202883C021000AF4202B804
-:100810003C0208008C42005C244200013C010800BC
-:10082000AC22005C0A0001EB8FBF001010C0000674
-:10083000006028218F4401000E00018F000000009D
-:100840000A0001EA240500018F8200088F43010499
-:1008500050430007000028218F4401000E00018F43
-:10086000000000008F420104AF8200080000282130
-:100870008FBF001000A0102103E0000827BD001862
-:100880003C0208008C420088274301009465000C5C
-:10089000244200013C010800AC2200888C6400184E
-:1008A0000345102190454000AF4400388C62001C85
-:1008B0002403FFF800052E000043102434420004F6
-:1008C000AF42003C3C020005AF4200300000000097
-:1008D0000000000000000000AF450404000000001C
-:1008E00000000000000000003C020006344200014D
-:1008F000AF420030000000000000000000000000D7
-:100900008F420000304200101040FFFD0000102117
-:1009100003E000080000000027BDFFE0AFB20018B0
-:100920003C036010AFBF001CAFB10014AFB00010AB
-:100930008C6450002402FF7F3C1A80000082202437
-:100940003484380C24020037AC6450003C12080098
-:1009500026524D38AF42000824020C80AF420024DA
-:100960003C1B80083C06080024C6062C02401021CF
-:100970002404001C2484FFFFAC4600000481FFFD1A
-:10098000244200043C0208002442016C3C0108009F
-:10099000AC224D403C020800244204043C01080003
-:1009A000AC224D443C020800244207B83C01080038
-:1009B000AC224D883C0208002442025C3C03080043
-:1009C000246306343C040800248406E03C05080047
-:1009D00024A53B503C010800AC224DA03C0208007D
-:1009E000244205F43C010800AC264D843C0108007B
-:1009F000AC254D943C010800AC234D9C3C01080003
-:100A0000AC244DA43C010800AC224DA83C010800D8
-:100A1000AC234D3C3C010800AC204D483C01080093
-:100A2000AC204D4C3C010800AC204D503C0108006E
-:100A3000AC204D543C010800AC204D583C0108004E
-:100A4000AC204D5C3C010800AC204D603C0108002E
-:100A5000AC244D643C010800AC204D683C0108000A
-:100A6000AC204D6C3C010800AC204D703C010800EE
-:100A7000AC204D743C010800AC204D783C010800CE
-:100A8000AC264D7C3C010800AC264D803C010800A2
-:100A9000AC204D8C3C010800AC254D903C01080079
-:100AA000AC234D980E0006BB000000003C02800005
-:100AB000344200708C420000AF8200143C030800F6
-:100AC0008C6300208F820004104300043C028000ED
-:100AD0000E0004F3AF8300043C0280003446007033
-:100AE0003C0308008C6300A03C0208008C4200A478
-:100AF000104300048F8400143C010800AC2300A4C0
-:100B0000A743009E8CCA00003C0308008C6300BC15
-:100B10003C0208008C4200B80144202300641821E4
-:100B2000000040210064202B0048102100441021C7
-:100B30003C010800AC2300BC3C010800AC2200B81A
-:100B40008F510000322200071040FFDCAF8A0014F2
-:100B50008CC600003C0508008CA500BC3C040800C5
-:100B60008C8400B800CA302300A628210000102180
-:100B700000A6302B00822021008620213227000190
-:100B80003C010800AC2500BC3C010800AC2400B8C6
-:100B900010E0001F322200028F420100AF4200200D
-:100BA0008F420104AF4200A89342010B0E0001885E
-:100BB000305000FF2E02001D544000040010108031
-:100BC0000E00018B0A0002C5000000000052102137
-:100BD0008C4200000040F8090000000010400005B1
-:100BE0003C0240008F4301043C026020AC430014EF
-:100BF0003C024000AF4201383C0208008C42003405
-:100C0000244200013C010800AC22003432220002E0
-:100C10001040000E322200048F4201400E00018875
-:100C2000AF4200200E00034B000000003C024000D9
-:100C3000AF4201783C0208008C4200382442000197
-:100C40003C010800AC220038322200041040FF981A
-:100C50003C0280008F4201800E000188AF420020DC
-:100C60008F43018024020F00146200050000000081
-:100C70008F420188A742009C0A0002FA3C02400011
-:100C80009362000024030050304200FF1443000828
-:100C90003C0240000E00032D000000005440000400
-:100CA0003C0240000E000E0D000000003C0240001F
-:100CB000AF4201B83C0208008C42003C24420001D3
-:100CC0003C010800AC22003C0A00027A3C02800091
-:100CD0003C0290003442000100822025AF440020F5
-:100CE0008F4200200440FFFE0000000003E00008E7
-:100CF000000000003C0280003442000100822025F8
-:100D000003E00008AF44002027BDFFE0AFB10014AE
-:100D1000AFB0001000808821AFBF00180E000302A2
-:100D200030B000FF9362007D022020210202802566
-:100D3000A370007D8F7000743C0280000E00030BD6
-:100D400002028024160000098FBF00188F4201F8AC
-:100D50000440FFFE24020002AF5101C0A34201C4BF
-:100D60003C021000AF4201F88FBF00188FB1001491
-:100D70008FB0001003E0000827BD002027BDFFE86A
-:100D8000AFBF0010974201843042020010400005BE
-:100D9000000020210E001042000000000A00034164
-:100DA000240400018F420188044000098FBF001015
-:100DB0008F4201883C03FF00004310243C030400E1
-:100DC00014430003240400019362003E8FBF00100F
-:100DD0000080102103E0000827BD00182402000154
-:100DE000A3600022A76200168F4401400A0003108E
-:100DF0002405000127BDFFE8AFBF0014AFB000100D
-:100E000093620000304400FF3883002038820030B5
-:100E10000003182B0002102B00621824106000033E
-:100E200024020050148200628FBF001493420148D4
-:100E3000304200FF2443FFFF2C6200051040005C9D
-:100E40008FBF0014000310803C03080024634CC8CB
-:100E5000004310218C420000004000080000000008
-:100E60000E0003028F4401408F70000C8F4201443A
-:100E70001602000224020001AF62000C0E00030BF8
-:100E80008F4401408F420144145000048FBF00146E
-:100E90008FB000100A000FB827BD00188F62000C39
-:100EA0000A0003B300000000976200108F43014462
-:100EB0003042FFFF1462000900000000240200011C
-:100EC000A76200108F420140AF4202003C021000B6
-:100ED000AF4202380A0003BA8FBF001497620010B5
-:100EE0000A0003B3000000000E0003028F4401401B
-:100EF000976200128F4301443050FFFF1603000237
-:100F000024020001A76200120E00030B8F4401406F
-:100F10008F420144160200048FBF00148FB00010EE
-:100F20000A00034527BD0018976200120A0003B3A8
-:100F300000000000976200148F4301443042FFFF1D
-:100F4000146200068FBF0014240200018FB000104D
-:100F5000A76200140A0012E227BD0018976200146D
-:100F60000A0003B300000000976200168F4301449B
-:100F70003042FFFF14620006240200018FBF0014FC
-:100F80008FB00010A76200160A000BAA27BD001838
-:100F900097620016144000068FBF00143C02080040
-:100FA0008C420070244200013C010800AC22007019
-:100FB0008FB0001003E0000827BD001827BDFFE830
-:100FC000AFBF0014AFB000108F500100936200005B
-:100FD00093430109304400FF2402001F106200A562
-:100FE0002862002010400018240200382862000AFD
-:100FF0001040000C2402000B286200081040002C56
-:1010000000000000046000E528620002144000288F
-:1010100024020006106200268FBF00140A0004B7E5
-:101020008FB000101062005E2862000B144000DCDC
-:101030008FBF00142402000E106200738FB00010E6
-:101040000A0004B700000000106200C028620039E6
-:101050001040000A2402008024020036106200CAF8
-:1010600028620037104000B424020035106200C12D
-:101070008FBF00140A0004B78FB000101062002B5D
-:101080002862008110400006240200C824020039B2
-:10109000106200B48FBF00140A0004B78FB00010B4
-:1010A000106200998FBF00140A0004B78FB00010BF
-:1010B0003C0208008C420020104000B98FBF001491
-:1010C0000E00052B000000008F4201008F830020DE
-:1010D0009745010C97460108AC6200008F4201045D
-:1010E0003C04080094844DBE00052C00AC62000452
-:1010F0008F4201180006340000C43025AC6200089D
-:101100008F42011C24040001AC62000C9342010ACE
-:1011100000A22825AC650010AC600014AC6000187B
-:10112000AC66001C0A00048D8FBF00143C0208004E
-:101130008C4200201040009A8FBF00140E00052B37
-:1011400000000000974401083C03080094634DBE72
-:101150009745010C000422029746010E8F82002061
-:10116000000426000083202500052C003C0300809D
-:1011700000A6282500832025AC400000AC400004D8
-:10118000AC400008AC40000CAC450010AC40001472
-:10119000AC400018AC44001C0A00048C240400017C
-:1011A0009742010C144000150000000093620005F6
-:1011B0003042001014400011000000000E00030235
-:1011C0000200202193620005020020213442001019
-:1011D0000E00030BA36200059362000024030020AD
-:1011E000304200FF1043006D020020218FBF001429
-:1011F0008FB000100A00105827BD00180000000D25
-:101200000A0004B68FBF00143C0208008C42002084
-:10121000104000638FBF00140E00052B000000007B
-:101220008F4201048F8300209744010C3C05080085
-:1012300094A54DBEAC6200009762002C000424000F
-:101240003042FFFF008220253C02400E00A22825EC
-:10125000AC640004AC600008AC60000CAC60001032
-:10126000AC600014AC600018AC65001C0A00048C73
-:10127000240400010E00030202002021A7600008E0
-:101280000E00030B02002021020020210E0003109B
-:10129000240500013C0208008C4200201040004060
-:1012A0008FBF00140E00052B000000009742010CB8
-:1012B0008F8300203C05080094A54DBE0002140059
-:1012C000AC700000AC620004AC6000088F64004C9D
-:1012D0003C02401F00A22825AC64000C8F62005025
-:1012E00024040001AC6200108F620054AC62001450
-:1012F000AC600018AC65001C8FBF00148FB00010EC
-:101300000A00055027BD0018240200205082002545
-:101310008FB000100E000FA202002021104000200C
-:101320008FBF0014020020218FB000100000282180
-:101330000A00031027BD0018020020218FBF0014EF
-:101340008FB000100A00061827BD00189745010C41
-:10135000020020218FBF00148FB000100A00063851
-:1013600027BD0018020020218FB000100A00065D82
-:1013700027BD00189345010D020020218FB00010F9
-:101380000A0006A727BD0018020020218FBF001405
-:101390008FB000100A00068327BD00188FBF00140D
-:1013A0008FB0001003E0000827BD00188F420278BC
-:1013B0000440FFFE2402000234840080AF44024057
-:1013C000A34202443C02100003E00008AF4202784E
-:1013D0003C04080094844DCA3C0208008C424DD461
-:1013E0003083FFFF000318C000431021AF42003CD0
-:1013F0003C0208008C424DD0AF4200383C02005005
-:1014000034420008AF42003000000000000000003D
-:10141000000000008F420000304200201040FFFD1D
-:10142000000000008F4204003C010800AC224DC0C7
-:101430008F4204043C010800AC224DC43C02002051
-:10144000AF420030000000003C02080094424DC84A
-:101450003C03080094634DCC3C05080094A54DCE98
-:1014600024840001004310213083FFFF3C01080069
-:10147000A4224DC83C010800A4244DCA14650003F1
-:10148000000000003C010800A4204DCA03E0000851
-:10149000000000003C05000A27BDFFE803452821A5
-:1014A0003C04080024844DB0AFBF00100E0005B509
-:1014B0002406000A3C02080094424DB23C03080096
-:1014C00094634DCE3042000F2442000300431804C1
-:1014D00024027FFF0043102B10400002AF83001C4A
-:1014E0000000000D0E0004C2000000003C020800D5
-:1014F00094424DBA8FBF001027BD001803E00008CA
-:10150000A74200A23C02000A0342102194430006B5
-:101510003C02080094424DBA3C010800A4234DB699
-:10152000004310238F83001C0002140000021403E8
-:101530000043102B03E000083842000127BDFFE8FC
-:10154000AFBF00103C02000A034210219442000683
-:101550003C010800A4224DB60E00050F000000005B
-:101560005440FFF93C02000A8FBF001003E000085E
-:1015700027BD001827BDFFE8AFBF00100E00050F04
-:101580000000000010400003000000000E00051DD8
-:10159000000000003C0208008C424DC08FBF0010CC
-:1015A00027430400AF4200383C0208008C424DC47F
-:1015B00027BD0018AF830020AF42003C3C0200056D
-:1015C000AF42003003E00008AF8000188F8200189F
-:1015D0003C0300060002114000431025AF420030DA
-:1015E0000000000000000000000000008F4200002A
-:1015F000304200101040FFFD27420400AF8200205F
-:1016000003E00008AF8000183C0608008CC64DC4FB
-:101610008F8500188F8300203C02080094424DBA49
-:1016200027BDFFE024A5000124630020244200011F
-:1016300024C70020AFB10014AFB00010AFBF001836
-:10164000AF850018AF8300203C010800A4224DBAEA
-:10165000309000FF3C010800AC274DC404C10008D5
-:101660000000882104E00006000000003C020800A1
-:101670008C424DC0244200013C010800AC224DC008
-:101680003C02080094424DBA3C03080094634DC8E4
-:101690000010202B004310262C420001004410258E
-:1016A000144000048F830018240200101462000FFD
-:1016B000000000000E000541241100013C03080059
-:1016C00094634DBA3C02080094424DC81462000372
-:1016D000000000000E0004C200000000160000031D
-:1016E000000000000E00052B000000003C03080075
-:1016F00094634DBE3C02080094424DBC246300013B
-:101700003064FFFF3C010800A4234DBE1482000397
-:10171000000000003C010800A4204DBE120000069D
-:10172000000000003C02080094424DBAA74200A20B
-:101730000A0005A3022010210E00050F0000000082
-:1017400010400004022010210E00051D00000000C2
-:10175000022010218FBF00188FB100148FB000102D
-:1017600003E0000827BD00203084FFFF30A5FFFF05
-:1017700000001821108000070000000030820001E6
-:101780001040000200042042006518210A0005AB49
-:101790000005284003E000080060102110C000068A
-:1017A00024C6FFFF8CA2000024A50004AC82000028
-:1017B0000A0005B52484000403E0000800000000CE
-:1017C00010A0000824A3FFFFAC860000000000006A
-:1017D000000000002402FFFF2463FFFF1462FFFAF1
-:1017E0002484000403E0000800000000240200013B
-:1017F000AF62000CA7620010A7620012A76200147B
-:1018000003E00008A76200163082007F0342102127
-:101810003C08000E004818213C0208008C420020C1
-:1018200027BDFFD82407FF80AFB3001CAFB200185C
-:10183000AFB10014AFB00010AFBF00200080802116
-:1018400030B100FF0087202430D200FF1040002F6D
-:1018500000009821AF44002C906200002403005047
-:10186000304200FF1443000E000000003C0208005C
-:101870008C4200E00202102100471024AF42002CED
-:101880003C0208008C4200E0020210213042007F3E
-:101890000342102100481021944200D43053FFFF2E
-:1018A0000E00052B000000003C02080094424DBED3
-:1018B0008F8300200011340000C2302500122C005C
-:1018C0003C02400000C2302534A50001AC7000008D
-:1018D0008FBF0020AC6000048FB20018AC7300080A
-:1018E0008FB10014AC60000C8FB3001CAC6500100D
-:1018F0008FB00010AC60001424040001AC6000182C
-:1019000027BD00280A000550AC66001C8FBF0020D0
-:101910008FB3001C8FB200188FB100148FB000106D
-:1019200003E0000827BD00289343010F24020010A4
-:101930001062000E2865001110A00007240200129A
-:10194000240200082405003A10620006000030213D
-:1019500003E0000800000000240500351462FFFCCD
-:10196000000030210A0005D0000000008F42007402
-:1019700024420FA003E00008AF62000C27BDFFE87F
-:10198000AFBF00100E000310240500018FBF001030
-:1019900024020001A762001227BD001824020001E2
-:1019A00003E00008A360002227BDFFE0AFB10014F0
-:1019B000AFB00010AFBF001830B1FFFF0E00030240
-:1019C000008080219362003F24030004304200FF26
-:1019D0001443000C02002021122000082402000AF7
-:1019E0000E0005C900000000936200052403FFFEFD
-:1019F00000431024A362000524020012A362003FEA
-:101A0000020020210E00030BA360008116200003BA
-:101A1000020020210E00062D0000000002002021FF
-:101A2000322600FF8FBF00188FB100148FB0001056
-:101A3000240500380A0005D027BD002027BDFFE09F
-:101A4000AFBF001CAFB20018AFB10014AFB00010B0
-:101A50000E000302008080210E0005C90000000076
-:101A60009362003F24120018305100FF123200032D
-:101A70000200202124020012A362003F93620005AD
-:101A80002403FFFE004310240E00030BA362000595
-:101A9000020020212405002016320007000030211A
-:101AA0008FBF001C8FB200188FB100148FB00010D0
-:101AB0000A00031027BD00208FBF001C8FB2001842
-:101AC0008FB100148FB00010240500390A0005D032
-:101AD00027BD002027BDFFE8AFB00010AFBF001446
-:101AE0009742010C2405003600808021144000102C
-:101AF000304600FF0E000302000000002402001226
-:101B0000A362003F93620005344200100E0005C935
-:101B1000A36200050E00030B020020210200202119
-:101B20000E000310240500200A00069C000000009F
-:101B30000E0005D0000000000E000302020020216C
-:101B4000936200232403FF9F0200202100431024FE
-:101B50008FBF00148FB00010A36200230A00030B94
-:101B600027BD001827BDFFE0AFBF0018AFB10014BC
-:101B7000AFB0001030B100FF0E00030200808021E2
-:101B8000240200120E0005C9A362003F0E00030BE1
-:101B90000200202102002021022030218FBF0018E6
-:101BA0008FB100148FB00010240500350A0005D055
-:101BB00027BD0020A380002C03E00008A380002D97
-:101BC0008F4202780440FFFE8F820034AF42024011
-:101BD00024020002A34202443C02100003E0000879
-:101BE000AF4202783C0360008C625400304200082F
-:101BF0001440FFFD000000008C625408AF82000C0E
-:101C000024020052AC605408AC645430AC625434CA
-:101C10002402000803E00008AC6254003C026000AB
-:101C20008C42540030420008104000053C03600024
-:101C30008C625400304200081440FFFD0000000098
-:101C40008F83000C3C02600003E00008AC435408A2
-:101C500090A3000024020005008040213063003F73
-:101C600000004821146200050000502190A2001CD1
-:101C700094A3001E304900FF306AFFFFAD00000C46
-:101C8000AD000010AD000024950200148D05001C6D
-:101C90008D0400183042FFFF00491023000211009C
-:101CA000000237C3004038210086202300A2102BF9
-:101CB0000082202300A72823AD05001CAD040018D6
-:101CC000A5090014A5090020A50A001603E00008D4
-:101CD000A50A00228F4201F80440FFFE2402000200
-:101CE000AF4401C0A34201C43C02100003E000085D
-:101CF000AF4201F83C0208008C4200B427BDFFE867
-:101D0000AFBF001424420001AFB000103C01080036
-:101D1000AC2200B48F4300243C02001F30AA00FF15
-:101D20003442FF8030D800FF006280240080F82118
-:101D300030EF00FF1158003B01405821240CFF8078
-:101D40003C19000A3163007F000310C000031940F2
-:101D5000006218213C0208008C4200DC256800016A
-:101D6000310D007F03E21021004310213043007F3A
-:101D700003431821004C102400794821AF4200246D
-:101D80008D220024016C1824006C7026AD22000CFA
-:101D90008D220024310800FFAD220010952200148E
-:101DA000952300208D27001C3042FFFF3063FFFF8A
-:101DB0008D2600180043102300021100000227C3E3
-:101DC0000040282100C4302300E2102B00C2302341
-:101DD00000E53823AD27001CAD2600189522002011
-:101DE000A522001495220022154B000AA5220016F8
-:101DF0008D2300248D2200082546000131450080F6
-:101E00001462000430C4007F108F000238AA0080E2
-:101E100000C0502151AF000131C800FF1518FFC9A3
-:101E2000010058218F8400343082007F0342182142
-:101E30003C02000A006218212402FF800082202454
-:101E4000AF440024A06A0079A06A00838C6200502D
-:101E50008F840034AC6200708C6500743C027FFF9C
-:101E60003442FFFF00A228240E000703AC65007473
-:101E7000AF5000248FBF00148FB0001003E00008A3
-:101E800027BD001827BDFFC0AFBE0038AFB7003474
-:101E9000AFB5002CAFB20020AFB1001CAFB000183E
-:101EA000AFBF003CAFB60030AFB40028AFB30024E2
-:101EB0008F4500248F4600288F43002C3C02001FD2
-:101EC0003442FF800062182400C230240080A82120
-:101ED000AFA3001400A2F0240E0006C7AFA60010A6
-:101EE0003C0208008C4200E02410FF80036088213F
-:101EF00002A2102100501024AF4200243C0208002E
-:101F00008C4200E002A210213042007F03421821DF
-:101F10003C02000A00629021924200D29363008446
-:101F2000305700FF306300FF2402000110620034CC
-:101F30000360202124020002146200360000000029
-:101F40000E0012AE024028219223008392220083C9
-:101F50003063007F3042007F000210C00003194050
-:101F6000006218213C0208008C4200DC02A2102111
-:101F70000043382100F01024AF4200289225007859
-:101F80009224008330E2007F034218213C02000CBF
-:101F900014850007006280212402FFFFA24200F1A5
-:101FA0002402FFFFA64200F20A0007BF2402FFFF3F
-:101FB00096020020A24200F196020022A64200F200
-:101FC0008E020024AE4200F492220083A24200F06E
-:101FD0008E4200C8AE4200FC8E4200C4AE4200F801
-:101FE0008E220050AE4201008E4200CCAE4201046F
-:101FF000922200853042003F0A00081A3442004015
-:102000000E0012D102402821922200850A00081AEF
-:102010003042003F936200852403FFDF3042003FDF
-:10202000A36200859362008500431024A3620085AB
-:102030009363008393620078307400FF304200FFA6
-:1020400010540036240AFF803C0C000C3283007FC1
-:10205000000310C000031940006218213C02080070
-:102060008C4200DC268800013109007F02A2102189
-:102070000043382130E2007F0342182100EA102497
-:10208000AF420028006C80218E020024028A1824AE
-:10209000006A5826AE02000C8E020024310800FFB0
-:1020A000AE02001096020014960300208E07001C5A
-:1020B0003042FFFF3063FFFF8E06001800431023FD
-:1020C00000021100000227C30040282100C4302371
-:1020D00000E2102B00C2302300E53823AE07001CBD
-:1020E000AE06001896020020A602001496020022F6
-:1020F000A602001692220079304200FF1054000719
-:102100000000000051370001316800FF9222007882
-:10211000304200FF1448FFCD0100A021922200832D
-:10212000A22200798E2200500A00087AAE220070A6
-:10213000A22200858E22004C2405FF80AE42010CB5
-:102140009222008534420020A2220085924200D1D2
-:102150003C0308008C6300DC305400FF3C020800A4
-:102160008C4200E400143140001420C002A3182166
-:1021700000C4202102A21021006438210046102151
-:102180000045182400E52824AF450028AF43002C63
-:102190003042007F924400D030E3007F0342282188
-:1021A000034318213C02000C006280213C02000E17
-:1021B000309600FF00A298211296002A000000002D
-:1021C0008E02000C02002021026028211040002510
-:1021D000261000280E0006E2000000009262000DAA
-:1021E00026830001307400FF3042007FA262000DA0
-:1021F0002404FF801697FFF0267300203C0208009D
-:102200008C4200DC0000A02102A210210044102416
-:10221000AF4200283C0208008C4200E43C03080066
-:102220008C6300DC02A2102100441024AF42002C79
-:102230003C0208008C4200E402A318213063007FB6
-:1022400002A210213042007F0342202103431821C3
-:102250003C02000C006280213C02000E0A00083C97
-:10226000008298218E4200D8AE2200508E4200D8C3
-:10227000AE22007092250083924600D19223008303
-:10228000924400D12402FF8000A228243063007F02
-:10229000308400FF00A628250064182A1060000280
-:1022A00030A500FF38A50080A2250083A225007973
-:1022B0000E0006D5000000009222007E02A0202120
-:1022C000A222007A8E2300743C027FFF3442FFFF7B
-:1022D000006218240E000703AE2300748FA20010C2
-:1022E000AF5E00248FBF003CAF4200288FBE003895
-:1022F0008FA200148FB700348FB600308FB5002C3A
-:102300008FB400288FB300248FB200208FB1001C3F
-:102310008FB0001827BD004003E00008AF42002C3A
-:1023200090A2000024420001A0A200003C0308008B
-:102330008C6300F4304200FF1443000F0080302112
-:10234000A0A000003C0208008C4200E48F8400340E
-:10235000008220213082007F034218213C02000CC1
-:10236000006218212402FF8000822024ACC30000F8
-:1023700003E00008AF4400288C82000024420020C3
-:1023800003E00008AC82000094C200003C08080092
-:10239000950800CA30E7FFFF0080482101021021A4
-:1023A000A4C2000094C200003042FFFF00E2102BE4
-:1023B00054400001A4C7000094A200003C030800A0
-:1023C0008C6300CC24420001A4A2000094A200006F
-:1023D0003042FFFF544300078F8600280107102B6F
-:1023E000A4A000005440000101003821A4C700004F
-:1023F0008F8600288CC4001CAF44003C94A20000CF
-:102400008F43003C3042FFFF000210C000621821E1
-:10241000AF43003C8F42003C008220231880000420
-:10242000000000008CC200180A0008DB24420001F2
-:102430008CC20018AF4200383C02005034420010F9
-:10244000AF4200300000000000000000000000006B
-:102450008F420000304200201040FFFD00000000CD
-:102460008F420404AD2200048F420400AD2200001C
-:102470003C020020AF42003003E0000800000000F2
-:1024800027BDFFE0AFB20018AFB10014AFB000102D
-:10249000AFBF001C94C2000000C080213C120800A5
-:1024A000965200C624420001A602000096030000D6
-:1024B00094E2000000E03021144300058FB10030A9
-:1024C0000E0008B0024038210A00090D000000008B
-:1024D0008C8300048C8200042442004004610007C5
-:1024E000AC8200048C820004044000040000000060
-:1024F0008C82000024420001AC82000096020000A1
-:102500003042FFFF50520001A6000000962200005A
-:1025100024420001A62200008F820028962300009A
-:1025200094420016144300048FBF001C24020001D3
-:10253000A62200008FBF001C8FB200188FB10014BC
-:102540008FB0001003E0000827BD00208F8900280D
-:1025500027BDFFE0AFBF00188D22002827480400E8
-:1025600030E700FFAF4200388D22002CAF880030EA
-:10257000AF42003C3C020005AF42003000000000CA
-:10258000000000000000000000000000000000004B
-:10259000000000008C82000C8C82000CAD02000058
-:1025A0008C820010AD0200048C820018AD0200087D
-:1025B0008C82001CAD02000C8CA20014AD02001035
-:1025C0008C820020AD02001490820005304200FF92
-:1025D00000021200AD0200188CA20018AD02001C0F
-:1025E0008CA2000CAD0200208CA20010AD020024D1
-:1025F0008CA2001CAD0200288CA20020AD02002C91
-:10260000AD060030AD000034978300263402FFFF92
-:1026100014620002006020213404FFFF10E000116A
-:10262000AD040038952300369524003624020001BD
-:102630003063FFFF000318C2006918219065004055
-:10264000308400070082100400451025A06200407D
-:102650008F820028944200563042FFFF0A0009741E
-:10266000AD02003C9523003695240036240200017B
-:102670003063FFFF000318C2006918219065004015
-:102680003084000700821004000210270045102447
-:10269000A0620040AD00003C00000000000000000F
-:1026A000000000003C02000634420040AF4200300F
-:1026B0000000000000000000000000008F42000049
-:1026C000304200101040FFFD8F860028AF88003098
-:1026D00024C2005624C7003C24C4002824C500326C
-:1026E00024C600360E0008EEAFA200108FBF0018FF
-:1026F00003E0000827BD00208F8300243C0608006B
-:102700008CC600E88F82003430633FFF00031980DD
-:1027100000461021004310212403FF803046007F33
-:1027200000431024AF420028034618213C02000C4D
-:102730000062302190C2000D30A500FF000038215A
-:1027400034420010A0C2000D8F8900288F8A002417
-:1027500095230036000A138230480003240200014A
-:10276000A4C3000E1102000B290200021040000554
-:10277000240200021100000C240300010A0009B821
-:102780000000182111020006000000000A0009B82C
-:10279000000018218CC2002C0A0009B82443000153
-:1027A0008CC20014244300018CC200180043102B7B
-:1027B00050400009240700012402002714A200034E
-:1027C000000000000A0009C4240700019522003E11
-:1027D00024420001A522003E000A13823043000378
-:1027E0002C620002104000090080282114600004BF
-:1027F0000000000094C200360A0009D43046FFFFF2
-:102800008CC600380A0009D400802821000030213D
-:102810003C04080024844DD80A000921000000006F
-:10282000274901008D22000C95230006012020215C
-:10283000000216023046003F3063FFFF24020027EB
-:1028400000C0282128C7002810C2000EAF83002432
-:1028500010E00008240200312402002110C2000907
-:102860002402002510C200079382002D0A0009F3FC
-:102870000000000010C200059382002D0A0009F339
-:10288000000000000A00098C000000000A0006BEDB
-:102890000000000095230006912400058D25000C02
-:1028A0008D2600108D2700188D28001C8D290020F2
-:1028B000244200013C010800A4234DDE3C01080035
-:1028C000A0244DDD3C010800AC254DE43C0108008E
-:1028D000AC264DE83C010800AC274DF03C01080057
-:1028E000AC284DF43C010800AC294DF803E0000889
-:1028F000A382002D8F87002827BDFFC0AFB300340F
-:10290000AFB20030AFB1002CAFB00028AFBF00387D
-:102910003C0208008C4200D094E3003030B0FFFF4E
-:10292000005010073045FFFF3063FFFF00C09821C3
-:10293000A7A200103C110800963100C614A300069F
-:102940003092FFFF8CE2002424420030AF42003C72
-:102950000A000A2C8CE2002094E200323042FFFF91
-:1029600054A2000827A400188CE2002C2442003056
-:10297000AF42003C8CE20028AF4200380A000A3A1D
-:102980008F84002827A5001027A6002002203821C8
-:102990000E0008B0A7A000208FA20018244200302B
-:1029A000AF4200388FA2001CAF42003C8F84002849
-:1029B0003C020005AF4200309482003427430400FB
-:1029C0003042FFFF0202102B14400007AF8300309B
-:1029D0009482005494830034020210210043102397
-:1029E0000A000A4E3043FFFF94830054948200345F
-:1029F0000223182100501023006218233063FFFFC8
-:102A0000948200163042FFFF1443000300000000D0
-:102A10000A000A5C24030001948200163042FFFF82
-:102A20000043102B104000058F8200309482001666
-:102A3000006210233043FFFF8F820030AC53000050
-:102A4000AC400004AC520008AC43000C3C02000651
-:102A500034420010AF4200300000000000000000CF
-:102A6000000000008F420000304200101040FFFDC7
-:102A7000001018C20064182190650040320400075D
-:102A8000240200018FBF00388FB300348FB20030B2
-:102A90008FB1002C8FB00028008210040045102553
-:102AA00027BD004003E00008A062004027BDFFA84A
-:102AB000AFB60050AFB5004CAFB40048AFB3004460
-:102AC000AFB1003CAFBF0054AFB20040AFB0003870
-:102AD0008C9000003C0208008C4200E88F86003495
-:102AE000960300022413FF8000C2302130633FFFB1
-:102AF0000003198000C3382100F3102490B20000B5
-:102B0000AF42002C9203000230E2007F03423021EA
-:102B10003C02000E00C28821306300C02402004045
-:102B20000080A82100A0B021146200260000A0218E
-:102B30008E3400388E220018144000022402000156
-:102B4000AE2200189202000D304200201440001501
-:102B50008F8200343C0308008C6300DC001238C014
-:102B6000001231400043102100C7302100463821B7
-:102B700030E300073C02008030E6007800C23025D8
-:102B80000343182100F31024AF4208002463090016
-:102B9000AF4608108E2200188C63000800431021F5
-:102BA000AE2200188E22002C8E2300182442000131
-:102BB0000062182B1060003D000000000A000B109E
-:102BC00000000000920300022402FFC00043102412
-:102BD000304200FF1440000524020001AE2200181C
-:102BE000962200360A000AF93054FFFF8E220014A4
-:102BF00024420001AE2200189202000000021600DA
-:102C000000021603044100290000000096020002A1
-:102C100027A4001000802821A7A200169602000217
-:102C200024070001000030213042FFFFAF82002462
-:102C30000E000921AFA0001C960300023C0408000E
-:102C40008C8400E88F82003430633FFF00031980DA
-:102C500000441021004310213043007F3C05000C4C
-:102C60000053102403431821AF42002800651821A7
-:102C70009062000D001221403042007FA062000DE2
-:102C80003C0308008C6300E48F8200340043102171
-:102C90000044382130E2007F03421021004510211A
-:102CA00000F31824AF430028AEA200009222000DCA
-:102CB000304200101040001302A020218F83002812
-:102CC0008EA40000028030219462003E2442FFFF67
-:102CD000A462003E948400029625000E3084FFFF1B
-:102CE0000E000A0B30A5FFFF8F82002894430034AA
-:102CF0009622000E1443000302A0202124020001AA
-:102D0000A382002C02C028210E00089600000000BB
-:102D10008FBF00548FB600508FB5004C8FB4004861
-:102D20008FB300448FB200408FB1003C8FB00038A9
-:102D300003E0000827BD00588F82002827BDFFD080
-:102D4000AFB40028AFB20020AFBF002CAFB3002457
-:102D5000AFB1001CAFB00018904400D0904300D138
-:102D60000000A021309200FFA3A30010306300FFF9
-:102D70008C5100D88C5300DC1072002B240200010F
-:102D80003C0308008C6300E493A400108F8200349D
-:102D90002406FF800004214000431021004410213C
-:102DA0003043007F00461024AF420028034318211F
-:102DB0003C02000C006218218C62000427A400145D
-:102DC00027A5001002228021027010230440001564
-:102DD000AFA300149062000D00C21024304200FF27
-:102DE00014400007020088219062000D3442004028
-:102DF0000E000896A062000D0A000B5593A2001069
-:102E00000E000A79241400018F830028AC7000D8CA
-:102E100093A20010A06200D193A200101452FFD818
-:102E20000000000024020001168200048FBF002C65
-:102E30000E0006BE000000008FBF002C8FB40028DB
-:102E40008FB300248FB200208FB1001C8FB0001808
-:102E500003E0000827BD003027BDFFD8AFB3001C3A
-:102E6000AFB20018AFB10014AFB00010AFBF002078
-:102E70000080982100E0802130B1FFFF0E00052B7B
-:102E800030D200FF00000000000000000000000041
-:102E90008F820020AC510000AC520004AC530008FB
-:102EA000AC40000CAC400010AC400014AC4000182A
-:102EB0003C03080094634DBE02038025AC50001C07
-:102EC00000000000000000000000000024040001D9
-:102ED0008FBF00208FB3001C8FB200188FB1001479
-:102EE0008FB000100A00055027BD002827BDFFE85D
-:102EF000AFB00010AFBF001430A5FFFF30C600FF19
-:102F00000080802124020C80AF42002400000000D9
-:102F100000000000000000000000000000000000B1
-:102F20000E000B64000000003C040800248400E054
-:102F30008C8200002403FF808FBF00140202102146
-:102F400000431024AF4200248C8200003C03000A9E
-:102F5000020280213210007F035010218FB0001038
-:102F60000043102127BD001803E00008AF820028AD
-:102F700027BDFFE8AFBF00108F4401403C030800AD
-:102F80008C6300E02402FF80AF84003400831821AA
-:102F900000621024AF4200243C020008034240219A
-:102FA000950500023063007F3C02000A03431821AC
-:102FB0000062182130A5FFFF3402FFFF000030211E
-:102FC0003C07602010A20006AF8300282402FFFF08
-:102FD000A5020002946500D40E000B8930A5FFFF06
-:102FE0008FBF001024020C8027BD001803E00008EA
-:102FF000AF4200243C020008034240219502000237
-:103000003C0A0800954A00C63046FFFF14C000077E
-:103010003402FFFF8F8200288F8400343C07602039
-:10302000944500D40A000BF230A5FFFF10C2002423
-:103030008F87002894E2005494E400163045FFFF87
-:1030400000A6102300A6182B3089FFFF1060000493
-:103050003044FFFF00C51023012210233044FFFF3E
-:10306000008A102B1040000C012A102324020001BA
-:10307000A50200162402FFFFA502000294E500D479
-:103080008F8400340000302130A5FFFF3C07602012
-:103090000A000B89000000000044102A10400008BC
-:1030A00000000000950200163042000110400004AC
-:1030B000000000009742007E24420014A502001682
-:1030C00003E00008000000008F84002827BDFFE017
-:1030D000AFBF0018948200349483003E1060001A41
-:1030E0003048FFFF9383002C240200011462002764
-:1030F0008FBF00188F820028000818C2310800070F
-:10310000006218212447003A244900542444002036
-:10311000244500302446003490620040304200FFD5
-:103120000102100730420001104000168FBF001846
-:103130000E0008EEAFA900108F82002894420034E0
-:103140000A000C0B3048FFFF948300369482003451
-:103150001043000E8FBF001894820036A482003402
-:1031600094820056A48200548C82002CAC820024ED
-:1031700094820032A48200309482003CA482003AFF
-:103180008FBF00180A000BCB27BD002003E000080A
-:1031900027BD002027BDFFE8AFBF00108F4A010008
-:1031A0003C0508008CA500E03C02080090424DE47C
-:1031B0003C0C0800958C4DDE01452821304B003F2A
-:1031C00030A2007F03424021396900323C02000AEC
-:1031D0003963003F2C630001010240212D290001C9
-:1031E0002402FF8000A2282401234825AF8A00344E
-:1031F00000801821AF4500240000302100802821E4
-:1032000024070001AF8800283C04080024844DD81E
-:10321000AF8C002415200007A380002D240200207D
-:103220005562000F006020213402FFFF5582000C20
-:10323000006020212402002015620005000000002B
-:103240008C6300142402FFFF1062000700000000DE
-:103250000E000921000000000A000C6800000000B8
-:103260000E00098C016028210E000C0000000000F7
-:103270008FBF001024020C8027BD001803E0000857
-:10328000AF4200243C0208008C4200E027BDFFA0B2
-:10329000AFB1003C008210212411FF80AFBE005866
-:1032A000AFB70054AFB20040AFB00038AFBF005C62
-:1032B000AFB60050AFB5004CAFB40048AFB3004458
-:1032C000005110248F4800248F4900288F47002880
-:1032D000AF4200243C0208008C4200E000809021B4
-:1032E00024060006008210213042007F034218218C
-:1032F0003C02000A006280213C02001F3442FF8031
-:1033000000E2382427A40010260500F00122F02452
-:103310000102B8240E0005B5AFA700308FA2001837
-:10332000AE0200C48FA2001CAE0200C88FA200240F
-:10333000AE0200CC93A40010920300D12402FF80BF
-:103340000082102400431025304900FF3083007FA5
-:103350003122007F0062102A10400004000310C0D8
-:1033600001311026304900FF000310C0000319404E
-:10337000006218213C0208008C4200DC920400D25A
-:10338000024210210043102100511024AF420028B6
-:1033900093A300103063007F000310C000031940A6
-:1033A000006218213C0208008C4200DC024210211D
-:1033B000004310213042007F034218213C02000CE0
-:1033C000006240218FA300142402FFFF106200302E
-:1033D000309500FF93A2001195030014304400FFC4
-:1033E0003063FFFF0064182B1060000D0000000028
-:1033F000950400148D07001C8D0600183084FFFF13
-:1034000000442023000421000000102100E43821A2
-:1034100000E4202B00C230210A000CE200C430215D
-:10342000950400148D07001C8D0600183084FFFFE2
-:1034300000822023000421000000102100801821B8
-:1034400000C2302300E4202B00C4302300E33823E3
-:10345000AD07001CAD06001893A20011A5020014D0
-:1034600097A20012A50200168FA20014AD02001050
-:103470008FA20014AD02000C93A20011A50200203F
-:1034800097A20012A50200228FA20014AD02002410
-:103490002406FF80024610243256007FAF420024EB
-:1034A000035618213C02000A006280218E02004C63
-:1034B0008FA200203124007F000428C0AE020050FB
-:1034C0008FA200200004214000852821AE02007058
-:1034D00093A2001001208821A202008393A2001071
-:1034E000A2020079920200853042003FA2020085CC
-:1034F0003C0208008C4200DC0242102100451021F1
-:1035000000461024AF42002C3C0208008C4200E42C
-:103510003C0308008C6300DC0242102100441021AF
-:1035200000461024AF4200283C0208008C4200E410
-:103530000243182100651821024210210044102185
-:103540003042007F3063007F93A5001003422021AA
-:10355000034318213C02000E006240213C02000C93
-:1035600010B1008C008248213233007F16600019B0
-:103570002404FF803C0208008C4200DC024210213F
-:1035800000441024AF42002C3C0208008C4200E4AE
-:103590003C0308008C6300DC02421021004410242C
-:1035A000AF4200283C0208008C4200E4024318218C
-:1035B0003063007F024210213042007F034220210D
-:1035C000034318213C02000E006240213C02000C23
-:1035D000008248219124000D2414FF800000102156
-:1035E00000942025A124000D9504000295050014E7
-:1035F0008D07001C3084FFFF30A5FFFF8D060018EB
-:10360000008520230004210000E4382100C230217D
-:1036100000E4202B00C43021AD07001CAD060018CB
-:1036200095020002A5020014A50000168D020008F4
-:10363000AD0200108D020008AD02000C95020002E0
-:10364000A5020020A50000228D020008AD02002482
-:103650009122000D3042004010400042262200011D
-:103660003C0208008C4200E0A3B300283C10000A92
-:103670000242102100541024AF4200243C020800F2
-:103680008C4200E0A380002C27A4002C02421021D1
-:103690003042007F03421821007018218C6200D84C
-:1036A0008D26000427A50028AFA9002C0046102174
-:1036B000AC6200D80E000A79AF83002893A30028DB
-:1036C0008F8200280E0006BEA04300D10E000C0021
-:1036D0000000000002541024AF4200243C02080005
-:1036E0008C4200DC00132940001320C000A42021DC
-:1036F000024210210044102100541024AF42002C3B
-:103700003C0208008C4200E43C0308008C6300DCAF
-:10371000035630210242102100451021005410248C
-:10372000AF4200283C0208008C4200E4024318210A
-:103730000064182102421021004510213042007F10
-:103740003063007F03422021034318213C02000E16
-:10375000006240213C02000C00D080210082482100
-:10376000262200013043007F14750005304400FF1D
-:103770002403FF800223102400431026304400FF5E
-:1037800093A2001000808821250800281444FF76A9
-:103790002529002093A400108FA300142402FFFF0A
-:1037A0001062000A308900FF248200012483000196
-:1037B0003042007F14550005306900FF2403FF806C
-:1037C0000083102400431026304900FF9202007845
-:1037D000305300FF11330032012088213C020800E1
-:1037E0008C4200DC3225007F000520C00005294006
-:1037F00000A42021024210212406FF800044102151
-:1038000000461024AF42002C3C0308008C6300DC0F
-:103810003C0208008C4200E40243182102421021BD
-:103820000045102100641821004610243063007FF9
-:10383000AF420028034318213C02000E00624021E1
-:103840003C0208008C4200E48D06000C010020219F
-:1038500002421021004510213042007F034218210E
-:103860003C02000C0062482110C0000D01202821FC
-:103870000E0006E2000000002402FF80022218244D
-:1038800026240001006228263082007F14550002A1
-:10389000308300FF30A300FF1473FFD00060882145
-:1038A0008E0300743C027FFF3442FFFF0062182445
-:1038B000AE0300740E00070302402021AF5700241E
-:1038C0008FA20030AF5E00288FBF005C8FBE005813
-:1038D0008FB700548FB600508FB5004C8FB400489E
-:1038E0008FB300448FB200408FB1003C8FB00038DE
-:1038F00027BD006003E00008AF42002C27BDFFD8C1
-:10390000AFB1001CAFBF0020AFB000182751018835
-:10391000922200032408FF803C03000A3047007F06
-:10392000A3A700108F4601803C0208008C4200E0F3
-:10393000AF86003400C2282100A81024AF42002422
-:103940009224000030A2007F034210210043102186
-:10395000AF8200283084007F2402000214820025F8
-:10396000000719403C0208008C4200E400C210210C
-:103970000043282130A2007F0342182100A8102410
-:10398000AF4200283C02000C006218219062000D3A
-:10399000AFA3001400481025A062000D8FA30014EF
-:1039A0009062000D304200405040006A8FBF0020FE
-:1039B0008F860028A380002C27A400148CC200D876
-:1039C0008C63000427A50010004310210E000A7923
-:1039D000ACC200D893A300108F8200280E0006BE50
-:1039E000A04300D10E000C00000000000A000EA34E
-:1039F0008FBF00200E0006C700C020210E0006D594
-:103A0000000000003C0200080342802192230001D4
-:103A10009202007B1443004F8FBF002092220000CF
-:103A20003044007F24020004108200172882000521
-:103A30001040000624020005240200031082000743
-:103A40008FB1001C0A000EA40000000010820012BA
-:103A50008FBF00200A000EA48FB1001C92050083C6
-:103A6000920600788E0700748F84003430A500FF22
-:103A700000073E0230C600FF0E00070B30E7007F54
-:103A80000A000EA38FBF00200E000C6F8F8400343D
-:103A90000A000EA38FBF002024020C80AF42002436
-:103AA0009202003E30420040104000200000000022
-:103AB0009202003E000216000002160304410006B6
-:103AC000000000008F8400340E00063824050093A7
-:103AD0000A000EA38FBF00209202003F24030018AB
-:103AE000304200FF1443000C8F8400342405003959
-:103AF0000E0005D0000030210E0003028F84003438
-:103B000024020012A202003F0E00030B8F84003437
-:103B10000A000EA38FBF0020240500360E0005D03A
-:103B2000000030210A000EA38FBF00200E00030208
-:103B30008F8400349202000534420020A202000566
-:103B40000E00030B8F8400340E0010588F84003455
-:103B50008FBF00208FB1001C8FB0001824020C8092
-:103B600027BD002803E00008AF42002427BDFFE87E
-:103B7000AFB00010AFBF00142743010094620008EB
-:103B8000000214000002140304410002000080211E
-:103B90002410000194620008304200801040001A96
-:103BA00002001021946200083042200010400016EC
-:103BB000020010218C6300183C021C2D344219EDC8
-:103BC000240600061062000F3C0760213C0208003A
-:103BD0008C4200D4104000078F8200288F83002879
-:103BE000906200623042000F34420040A0620062E6
-:103BF0008F8200288F840034944500D40E000B89F6
-:103C000030A5FFFF020010218FBF00148FB00010FD
-:103C100003E0000827BD001827BDFFE0AFB1001486
-:103C2000AFB00010A380002CAFBF00188F4501007B
-:103C30003C0308008C6300E02402FF80AF85003461
-:103C400000A318213064007F03442021006218245F
-:103C50003C02000A00822021AF43002427500100CB
-:103C60008E0200148C8300DCAF84002800431023F4
-:103C700018400004000088218E0200140E000B1C66
-:103C8000AC8200DC9202000B24030002304200FFF1
-:103C90001443002F0000000096020008304300FF8C
-:103CA0002402008214620005240200840E0009D65A
-:103CB000000000000A000F2F00000000146200093D
-:103CC000240200818F8200288F8400343C07602109
-:103CD000944500D49206000530A5FFFF0A000F1E90
-:103CE00030C600FF14620027000000009202000AA4
-:103CF000304300FF3062002010400004306200407A
-:103D00008F8400340A000F1A24060040104000047B
-:103D1000000316008F8400340A000F1A24060041A5
-:103D200000021603044100178F8400342406004269
-:103D30008F8200283C076019944500D430A5FFFF0E
-:103D40000E000B89000000000A000F2F0000000089
-:103D50009202000B24030016304200FF10430006BD
-:103D6000000000009202000B24030017304200FF05
-:103D700014430004000000000E000EA90000000023
-:103D8000004088210E000C00000000009202000A92
-:103D9000304200081040000624020C808F85002865
-:103DA0003C0400080E0012860344202124020C80EB
-:103DB000AF4200248FBF0018022010218FB00010E6
-:103DC0008FB1001403E0000827BD002027BDFFE8E5
-:103DD000AFBF0014AFB000108F5000243C030800A8
-:103DE0008C6300E08F4501002402FF8000A31821AE
-:103DF0003064007F03442021006218243C02000A42
-:103E000000822021AF850034AF43002490820062FD
-:103E1000AF8400283042000F34420050A08200627C
-:103E20003C02001F3442FF800E0006BE02028024C6
-:103E3000AF5000248FBF00148FB0001003E00008C3
-:103E400027BD00183C0208008C4200201040001DD5
-:103E50002745010090A300093C02000803422021ED
-:103E600024020018546200033C0200080A000F708C
-:103E700024020008034220212402001614620005D7
-:103E80002402001724020012A082003F0A000F7AC9
-:103E900094A700085462000694A7000893620005E6
-:103EA0002403FFFE00431024A362000594A700082A
-:103EB00090A6001B8CA4000094A500060A000B64C9
-:103EC00000073C0003E00008000000002744010058
-:103ED00094820008304500FF38A3008238A2008495
-:103EE0002C6300012C4200010062182510600006BE
-:103EF000240200839382002D1040000D000000007A
-:103F00000A000C330000000014A2000524A2FF8068
-:103F10008F4301043C02602003E00008AC4300141E
-:103F2000304200FF2C420002104000032402002215
-:103F30000A000ED40000000014A2000300000000DC
-:103F40000A000F41000000000A000F5F000000009F
-:103F50009363007E9362007A1443000900002021DD
-:103F60009362000024030050304200FF1443000419
-:103F7000240400019362007E24420001A362007EBB
-:103F800003E00008008010218F4201F80440FFFE8A
-:103F900024020002AF4401C0A34201C43C0210004D
-:103FA00003E00008AF4201F827BDFFE8AFBF0010F3
-:103FB0009362003F2403000A304200FF144300468E
-:103FC000000000008F6300548F62004C1062007D7F
-:103FD000036030219362000024030050304200FF50
-:103FE0001443002F000000008F4401403C020800F1
-:103FF0008C4200E02403FF80008210210043102443
-:10400000AF4200243C0208008C4200E08F6500545F
-:104010003C03000A008220213084007F03441021E9
-:1040200000431021AC4501089762003C8F63004CAF
-:104030003042FFFF0002104000621821AF63005CB5
-:104040008F6300548F64004C9762003C0064182317
-:104050003042FFFF00031843000210400043102AC3
-:1040600010400006000000008F6200548F63004C77
-:10407000004310230A000FF0000210439762003C37
-:104080003042FFFF00021040ACC200642402000175
-:10409000A0C0007CA0C2008424020C80AF42002497
-:1040A0000E000FA28F440140104000478FBF001048
-:1040B0008F4301408F4201F80440FFFE24020002BA
-:1040C000AF4301C0A34201C43C021000AF4201F85B
-:1040D0000A0010408FBF00109362003F24030010BD
-:1040E000304200FF14430004000000008F440140F0
-:1040F0000A00102C000028219362003F24030016C0
-:10410000304200FF1443000424020014A362003F65
-:104110000A00103A000000008F62004C8F630050CC
-:1041200000431023044100288FBF001093620081D8
-:1041300024420001A3620081936200812C420004AA
-:1041400014400010000000009362003F24030004AC
-:10415000304200FF14430006000000008F4401407D
-:104160008FBF0010240500930A00063827BD0018F1
-:104170008F440140240500938FBF00100A0006A75A
-:1041800027BD00188F4401400E000302000000000C
-:104190008F6200542442FFFFAF6200548F620050D0
-:1041A0002442FFFFAF6200500E00030B8F4401401A
-:1041B0008F4401408FBF0010240500040A00031043
-:1041C00027BD00188FBF001003E0000827BD0018AE
-:1041D0008F4201889363007E00021402304400FF86
-:1041E000306300FF1464000D000000009362008043
-:1041F000304200FF1044000900000000A36400806A
-:104200009362000024030050304200FF1443000476
-:10421000000000000A00076F8F440180A364008043
-:1042200003E000080000000027BDFFE8AFB0001069
-:10423000AFBF001493620005240300303042003009
-:1042400014430089008080213C0208008C42002039
-:1042500010400080020020210E00052B000000000D
-:104260008F850020ACB000009362003E9363003F56
-:10427000304200FF00021200306300FF00431025AF
-:10428000ACA2000493620082000216000002160332
-:1042900004410005000000003C0308008C63004856
-:1042A0000A00107E000000009362003E3042004091
-:1042B000144000030000182193620081304300FF86
-:1042C0009362008200031E00304200FF00021400CF
-:1042D00000621825ACA300088F620040ACA2000C5D
-:1042E0008F620048ACA200108F62004CACA2001498
-:1042F0008F6200508F63004C004310230441000381
-:10430000000000000A0010928F62004C8F62005083
-:10431000ACA200183C02080094424DBE3C03C00B06
-:1043200000002021004310250E000550ACA2001C07
-:104330008F6200548F840020AC8200008F6200588E
-:10434000AC8200048F62005CAC8200088F62006067
-:104350008F43007400431021AC82000C8F62006414
-:10436000AC820010976300689762006A00031C002B
-:104370003042FFFF00621825AC8300149362008274
-:1043800024030080304200FF1443000300000000BB
-:104390000A0010C6AC8000188F63000C24020001D4
-:1043A0001062000E2402FFFF9362003E3042004084
-:1043B0001440000A2402FFFF8F63000C8F42007438
-:1043C000006218233C02080000621024144000021E
-:1043D000000028210060282100051043AC8200184D
-:1043E0003C02080094424DBE3C03C00C000020215A
-:1043F000004310258F8300200E000550AC62001C86
-:104400008F6200188F8300203C05080094A54DBEE4
-:1044100024040001AC620000AC6000048F66006CF4
-:104420003C02400D00A22825AC6600088F6200DC2B
-:10443000AC62000CAC600010936200050002160034
-:10444000AC620014AC6000180E000550AC65001C96
-:10445000020020218FBF00148FB00010A360000560
-:104460000A0004B927BD00188FBF00148FB00010D8
-:1044700003E0000827BD00189742007C30C600FF0B
-:10448000A08600843047FFFF2402000514C2000B01
-:1044900024E3465090A201122C420007104000076E
-:1044A00024E30A0090A30112240200140062100405
-:1044B00000E210210A0010FE3047FFFF3067FFFFC7
-:1044C00003E00008A4870014AC87004C8CA201080C
-:1044D0000080402100A0482100E2102330C600FFE8
-:1044E0001840000393AA001324E2FFFCACA20108C9
-:1044F00030C2000110400008000000008D02005092
-:1045000000E2102304410013240600058D0200542C
-:1045100010E20010000000008D02005414E2001AA6
-:10452000000000003C0208008C4200D8304200200D
-:104530001040000A240200019103007891020083D8
-:10454000144300062402000101002021012028213B
-:10455000240600040A0010EC00000000A100008402
-:1045600011400009A50200148F4301008F4201F899
-:104570000440FFFE24020002AF4301C0A34201C475
-:104580003C021000AF4201F803E000080000000008
-:1045900027BDFFE88FA90028AFBF00100080402191
-:1045A00000E918231860007330C600FFA080007C6B
-:1045B000A08000818CA2010800E210230440004D7D
-:1045C000000000008C8200509483003C8C840064C6
-:1045D000004748233063FFFF012318210083202B6D
-:1045E00010800004000000008D0200640A00114FDA
-:1045F00000E210219502003C3042FFFF0122102111
-:1046000000E21021AD02005C9502003C8D03005CCD
-:104610003042FFFF0002104000E210210043102B47
-:1046200010400003000000000A00115E8D02005CD3
-:104630009502003C3042FFFF0002104000E21021D2
-:10464000AD02005CA1000084AD07004C8CA2010803
-:1046500000E210231840000224E2FFFCACA2010893
-:1046600030C200011040000A000000008D0200501E
-:1046700000E2102304410004010020218D020054B7
-:1046800014E20003000000000A0011802406000567
-:104690008D02005414E200478FBF00103C02080056
-:1046A0008C4200D8304200201040000A2402000151
-:1046B0009103007891020083144300062402000154
-:1046C00001002021240600048FBF00100A0010EC16
-:1046D00027BD0018A1000084A50200148F4301002B
-:1046E0008F4201F80440FFFE240200020A0011A5D7
-:1046F000000000008C82005C004910230043102B56
-:1047000054400001AC87005C9502003C3042FFFF42
-:104710000062102B14400007240200029502003CA6
-:104720008D03005C3042FFFF00621821AD03005C86
-:1047300024020002AD07004CA10200840E000FA26B
-:104740008F4401001040001B8FBF00108F430100F9
-:104750008F4201F80440FFFE24020002AF4301C073
-:10476000A34201C43C021000AF4201F80A0011BB91
-:104770008FBF001030C200101040000E8FBF00101D
-:104780008C83005C9482003C006918233042FFFF58
-:10479000006218213C023FFF3444FFFF0083102BCE
-:1047A000544000010080182101231021AD02005C5B
-:1047B0008FBF001003E0000827BD001827BDFFE8E9
-:1047C0008FAA0028AFBF00100080402100EA4823D4
-:1047D0001920002130C600FF8C83005C8C820064AD
-:1047E000006A18230043102B504000100069182164
-:1047F00094A2011001221021A4A2011094A2011080
-:104800003042FFFF0043102B1440000A3C023FFFE0
-:1048100094A2011000431023A4A201109482003C32
-:104820003042FFFF0A0011DA00621821A4A0011033
-:104830003C023FFF3444FFFF0083102B5440000133
-:104840000080182100671021AD02005CA100007CEF
-:104850000A001222A100008130C200101040003C6A
-:10486000000000008C820050004A102318400038DD
-:10487000000000009082007C24420001A082007CA5
-:104880009082007C3C0308008C630024304200FFCF
-:104890000043102B1440005C8FBF00108CA2010855
-:1048A00000E2102318400058000000008C830054E0
-:1048B0009482003C006A18233042FFFF0003184333
-:1048C000000210400043102A1040000500000000C4
-:1048D0008C820054004A10230A001209000210437F
-:1048E0009482003C3042FFFF00021040AD020064A1
-:1048F0009502003C8D0400649503003C3042FFFFAC
-:1049000000021040008220213063FFFF0083182145
-:1049100001431021AD02005C8D020054ACA20108DD
-:1049200024020002A10200840E000FA28F440100A5
-:10493000104000358FBF00108F4301008F4201F8F7
-:104940000440FFFE240200020A00124B0000000097
-:10495000AD07004C8CA2010800E2102318400002B1
-:1049600024E2FFFCACA2010830C200011040000AA2
-:10497000000000008D02005000E2102304410004FA
-:10498000010020218D02005414E200030000000009
-:104990000A001242240600058D02005414E2001A97
-:1049A0008FBF00103C0208008C4200D8304200202B
-:1049B0001040000A24020001910300789102008354
-:1049C00014430006240200010100202124060004F3
-:1049D0008FBF00100A0010EC27BD0018A100008452
-:1049E000A50200148F4301008F4201F80440FFFE2E
-:1049F00024020002AF4301C0A34201C43C021000E4
-:104A0000AF4201F88FBF001003E0000827BD001877
-:104A10008FAA00108C8200500080402130C600FF19
-:104A2000004A102300A048211840000700E0182188
-:104A300024020001A0800084A0A00112A48200141E
-:104A40000A0011BDAFAA0010A0800081AD07004C84
-:104A50008CA2010800E210231840000224E2FFFCAF
-:104A6000ACA2010830C200011040000800000000A4
-:104A70008D0200500062102304410013240600053B
-:104A80008D02005410620010000000008D020054DE
-:104A900014620011000000003C0208008C4200D8A3
-:104AA000304200201040000A2402000191030078E7
-:104AB000910200831443000624020001010020211A
-:104AC00001202821240600040A0010EC0000000048
-:104AD000A1000084A502001403E00008000000000B
-:104AE00027BDFFE0AFBF0018274201009046000A33
-:104AF0008C4800148C8B004C9082008430C900FFDD
-:104B000001681823304A00FF1C60001A2D46000679
-:104B1000240200010142100410C0001630430003BB
-:104B2000012030210100382114600007304C000CB6
-:104B300015800009304200301440000B8FBF001870
-:104B40000A0012AC000000000E0011BDAFAB001057
-:104B50000A0012AC8FBF00180E001132AFAB00106C
-:104B60000A0012AC8FBF0018AFAB00100E0012523B
-:104B7000AFAA00148FBF001803E0000827BD002073
-:104B800024020003A08200848C82005403E0000809
-:104B9000ACA201083C020008034218219062008187
-:104BA000240600433C07601924420001A0620081F2
-:104BB000906300813C0208008C4200C0306300FF1B
-:104BC000146200102403FF803C0208008C4200E0C5
-:104BD0000082102100431024AF4200243C02080050
-:104BE0008C4200E03C03000A008210213042007F2A
-:104BF0000342102100431021944500D40A000B8980
-:104C000030A5FFFF03E000080000000027BDFFE023
-:104C1000AFBF0018AFB10014AFB000108F420180D9
-:104C20000080802100A088210E0012B300402021C6
-:104C3000A20000848E0200548FBF00188FB00010B5
-:104C4000AE2201088FB1001403E0000827BD002048
-:104C500027BDFFE03C020008AFB00010AFBF001856
-:104C6000AFB10014034280218F51014092030084B0
-:104C70008E0400508E02004C14820040306600FF0B
-:104C80003C0208008C4200E02403FF800222102135
-:104C900000431024AF4200243C0208008C4200E094
-:104CA0009744007C92050081022210213042007F4F
-:104CB000034218213C02000A0062182114A0000BD4
-:104CC0003084FFFF2402000554C20014248205DC56
-:104CD0009062011224420001A062011224020C80A1
-:104CE000AF4200240A00130B24020005A060011249
-:104CF0002402000514C20009248205DC920200810E
-:104D00002C4200075040000524820A0092030081D3
-:104D10002402001400621004008210213044FFFFBE
-:104D2000A60400140E0012B3022020219602003CBB
-:104D30008E03004C022020213042FFFF0002104071
-:104D4000006218210E000302AE03005C9202007D97
-:104D500002202021344200400E00030BA202007DFD
-:104D60008F4201F80440FFFE24020002AF5101C04F
-:104D7000A34201C43C021000AF4201F88FBF0018EB
-:104D80008FB100148FB0001003E0000827BD002091
-:104D900008000D9808000DE008000E2008000E6CB9
-:044DA00008000EA059
-:0C4DA4000A0000220000000000000000D7
-:104DB0000000000D6370352E302E306A3300000085
-:104DC00005000004000000000000000000000000DA
-:104DD00000000000000000000000000000000000D3
-:104DE00000000000000000000000000000000020A3
-:104DF00000000000000000000000000000000000B3
-:104E000000000000000000000000000000000000A2
-:104E10000000000000000000000000000000000191
-:104E20000000002B00000000000000000000000057
-:104E300010000003000000000000000D0000000D45
-:104E40003C02080024425AC43C03080024636190D9
-:104E5000AC4000000043202B1480FFFD24420004DE
-:104E60003C1D080037BD7FFC03A0F0213C1008006A
-:104E7000261000883C1C0800279C5AC40E0001A67E
-:104E8000000000000000000D27BDFFE83C0960188D
-:104E9000AFBF00108D2C5000240DFF7F240800317F
-:104EA000018D5824356A380C24070C003C1A800008
-:104EB000AD2A50003C04800AAF4800083C1B800823
-:104EC000AF4700240E000938AF8400100E0008FB25
-:104ED000000000000E000848000000000E0012DF75
-:104EE000000000003C0460168C8500003C06FFFFBB
-:104EF0003C02535300A618241062004734867C00FD
-:104F000094C201F2A780002C10400003A78000CCBF
-:104F100038581E1EA798002C94C201F810400004B7
-:104F2000978300CC38591E1EA79900CC978300CCDC
-:104F30002C7F006753E00001240300669784002C57
-:104F40002C82040114400002006028212404040083
-:104F50003C0760008CE904382403103C3128FFFF33
-:104F60001103001F30B9FFFF57200010A38000CEAF
-:104F700024020050A38200CE939F00CE53E0000F86
-:104F8000A78500CCA78000CC978500CC8FBF0010F0
-:104F9000A780002CA7800034A78000E63C01080011
-:104FA000AC25008003E0000827BD0018939F00CEC9
-:104FB00057E0FFF5A78000CCA78500CC978500CCF3
-:104FC0008FBF0010A784002CA7800034A78000E6C4
-:104FD0003C010800AC25008003E0000827BD001854
-:104FE000A38000CE8CCB003C316A00011140000E42
-:104FF0000000000030A7FFFF10E0FFDE2402005099
-:105000008CCC00C83186000114C0FFDC939F00CE19
-:105010000A000074240200518C8F00043C0E6000D2
-:105020000A00005701EE30218CEF0808240D5708C4
-:10503000000F740211CD000430B8FFFF2405006694
-:105040000A000075240404001700FFCC939F00CED3
-:105050000A000074240200508F8600103089FFFF80
-:10506000000939408CC300103C08005000E820259E
-:10507000AF4300388CC5001427420400AF82001CE7
-:10508000AF45003CAF4400300000000000000000CD
-:105090000000000000000000000000000000000010
-:1050A00000000000000000008F4B0000316A00206B
-:1050B0001140FFFD0000000003E0000800000000B8
-:1050C0008F840010948A001A8C8700243149FFFFD6
-:1050D000000940C000E83021AF46003C8C85002428
-:1050E0008F43003C00A3102318400029000000005B
-:1050F0008C8B0020256200013C0D005035AC00086F
-:10510000AF420038AF4C003000000000000000004B
-:10511000000000000000000000000000000000008F
-:1051200000000000000000008F4F000031EE002062
-:1051300011C0FFFD000000008F4A04003C08002061
-:10514000AC8A00108F490404AC890014AF480030C9
-:1051500000000000948600189487001C00C71821E6
-:10516000A48300189485001A24A20001A482001AC6
-:105170009498001A9499001E133800030000000050
-:1051800003E000080000000003E00008A480001A0B
-:105190008C8200200A0000D63C0D00500A0000C797
-:1051A000000000003C0308008C6300208F82001880
-:1051B00027BDFFE810620008AFBF00100E0000FE20
-:1051C000AF8300183C0308008C6300202404000116
-:1051D000106400048F8900108FBF001003E00008E6
-:1051E00027BD00188FBF00103C076012A520000AE1
-:1051F0009528000A34E5001027BD00183106FFFF8E
-:1052000003E00008ACA600903C0208008C4200209D
-:1052100027BDFFC8AFBF0034AFBE0030AFB7002C12
-:10522000AFB60028AFB50024AFB40020AFB3001C68
-:10523000AFB20018AFB1001410400050AFB0001072
-:105240008F840010948600069483000A00C32823EC
-:1052500030B6FFFF12C0004A8FBF00349489001897
-:10526000948A000A012A40233102FFFF02C2382B30
-:1052700014E0000202C02021004020212C8C0005F7
-:10528000158000020080A021241400040E0000AD4F
-:10529000028020218F87001002809821AF800014A7
-:1052A00094ED000A028088211280004E31B2FFFF87
-:1052B0003C1770003C1540003C1E60008F8F001CA6
-:1052C0008DEE000001D718245075005002202021D7
-:1052D00002A3802B160000353C18200050780047B0
-:1052E00002202021241000018F8300141460003953
-:1052F000029158230230F8230250C82133F1FFFFF6
-:105300001620FFEE3332FFFF8F8700103C11002084
-:10531000AF5100300000000094E6000A3C1E60120D
-:1053200037D5001002662821A4E5000A94E2000A9D
-:1053300094F2000A94F400183057FFFF1292003BD9
-:10534000AEB700908CED00148CE400100013714097
-:1053500001AE4021000E5FC3010E502B008B48218F
-:10536000012A1821ACE80014ACE3001002D3382362
-:1053700030F6FFFF16C0FFB98F8400108FBF0034D6
-:105380008FBE00308FB7002C8FB600288FB5002459
-:105390008FB400208FB3001C8FB200188FB100149F
-:1053A0008FB0001003E0000827BD0038107E001BFE
-:1053B000000000001477FFCC241000010E00162A14
-:1053C000000000008F8300141060FFCB0230F82330
-:1053D000029158238F870010017020210A0001914B
-:1053E0003093FFFF8F8300141460FFCB3C1100202B
-:1053F000AF5100300A00015D000000000E0007A15F
-:10540000024028210A000151004080210E00034B78
-:10541000024028210A000151004080210E0014F2B0
-:10542000022020210A000151004080210E0000C707
-:10543000000000000A00017302D3382327BDFFE8F3
-:10544000AFB00010AFBF00140E0000390000000024
-:105450003C028000345000700A0001B48E06000047
-:105460008F4F000039EE000131C2000110400024CE
-:105470008F8600A88E0700003C0C08008D8C003C35
-:105480003C0908008D29003800E66823018D282199
-:105490000000502100AD302B012A402101062021BF
-:1054A0003C010800AC25003CAF8700A83C01080087
-:1054B000AC2400380E000100000000003C0308008E
-:1054C0008C6300701060FFE6006020213C0508003E
-:1054D0008CA500683C0608008CC6006C0E0015B94F
-:1054E000000000003C010800AC2000708F4F00005D
-:1054F00039EE000131C200011440FFDE8F8600A8A2
-:105500008E0A00008F8B00A83C0508008CA5003C8B
-:105510003C0408008C840038014B482300A9382142
-:105520000082182100E9402B006810213C0108008E
-:10553000AC27003C3C010800AC2200388F5F010022
-:105540002419FF0024180C0003F9202410980012DD
-:10555000AF840000AF440020936D0000240C0020B5
-:1055600031A600FF10CC0012240E005010CE000413
-:105570003C194000AF5901380A0001AD000000009D
-:105580000E001255000000003C194000AF590138D0
-:105590000A0001AD000000000E000119000000002B
-:1055A0003C194000AF5901380A0001AD000000006D
-:1055B0008F58010000802821330F00FF01E02021D7
-:1055C0000E0002F8AF8F00043C194000AF590138BB
-:1055D0000A0001AD0000000000A4102B240300010C
-:1055E00010400009000030210005284000A4102BC5
-:1055F00004A00003000318405440FFFC00052840AD
-:105600005060000A0004182B0085382B54E0000479
-:105610000003184200C330250085202300031842F0
-:105620001460FFF9000528420004182B03E000086D
-:1056300000C310213084FFFF30A5FFFF8F4201B867
-:105640000440FFFE3C074080008730253C031000EB
-:10565000AF400180AF450184AF46018803E00008F8
-:10566000AF4301B83084FFFF8F4201B80440FFFE12
-:105670003C0740388CA60000008728253C0310001A
-:10568000AF460180AF45018803E00008AF4301B891
-:105690008F8300388F8600301066000B0080402119
-:1056A0003C07080024E75C38000328C000A710214D
-:1056B0008C44000024630001108800053063000F53
-:1056C0005466FFFA000328C003E000080000102120
-:1056D0003C07080024E75C3C00A7302103E00008F9
-:1056E0008CC200003C03900034620001008220253F
-:1056F000AF4400208F45002004A0FFFE0000000002
-:1057000003E00008000000003C0380003462000158
-:105710000082202503E00008AF44002027BDFFE001
-:10572000AFB100143091FFFFAFB00010AFBF001851
-:105730001220001500A080218CA5000010A00013ED
-:10574000240400020E000C7F24060140AE0000007D
-:105750008F4201B80440000D000028213C064000A3
-:10576000022620258FBF00188FB100148FB00010C3
-:105770003C03100027BD0020AF450180AF440188E5
-:1057800003E00008AF4301B88CA500008F4201B8C8
-:105790000440FFFE3C064000022620258FBF001873
-:1057A0008FB100148FB000103C03100027BD002003
-:1057B000AF450180AF44018803E00008AF4301B862
-:1057C0003086FFFF8F4201B80440FFFE3C094006CF
-:1057D0008CA8000000C93825AF4801808CA40004C3
-:1057E0003C031000AF440184AF47018803E0000888
-:1057F000AF4301B827BDFFE0AFB00010AFBF001846
-:10580000AFB100149363003E008080210080282106
-:1058100030620040000020211040000F8E11000077
-:105820000E00087402202021936700002404005019
-:1058300030E500FF50A400128E0F0000022020214E
-:105840008FBF00188FB100148FB00010A762013C09
-:105850000A00093427BD00200E0002870000000066
-:105860000E000874022020219367000024040050D9
-:1058700030E500FF14A4FFF2022020218E0F00006B
-:105880003C1008008E1000503C0D000C240BFF80D3
-:1058900001F05021314E007F01DA6021018D40215D
-:1058A000014B4824AF490028022020218FBF001857
-:1058B0008FB100148FB00010A50200D627BD0020C4
-:1058C0000A000934AF8800D027BDFFE0AFBF001841
-:1058D000AFB10014AFB000109366000100808021CA
-:1058E0000E00025030D1000493640005001029C25C
-:1058F000A765000034830040A36300050E00025931
-:10590000020020210E00093602002021240200019D
-:10591000AF62000C02002821A762001024040002DC
-:10592000A762001224060140A76200140E000C7F3B
-:10593000A76200161620000F8FBF0018978C003446
-:105940003C0B08008D6B00782588FFFF3109FFFFB5
-:10595000256A0001012A382B10E00006A7880034D0
-:105960003C0F6006240E001635ED0010ADAE005061
-:105970008FBF00188FB100148FB0001003E0000833
-:1059800027BD002027BDFFE0AFB10014AFBF001856
-:10599000AFB0001000A088211080000A3C03600016
-:1059A0002402008010820012000000000000000DA0
-:1059B0008FBF00188FB100148FB0001003E00008F3
-:1059C00027BD00208C682BF80500FFFE00000000BA
-:1059D000AC712BC08FBF00188FB100148FB00010B6
-:1059E0003C09100027BD002003E00008AC692BF83B
-:1059F0000E00025000A02021936500050220202106
-:105A00000E00025930B000FF2403003E1603FFE7EA
-:105A1000000000008F4401780480FFFE2407000787
-:105A20003C061000AF51014002202021A347014451
-:105A30008FBF00188FB100148FB00010AF460178EF
-:105A40000A0002C927BD002027BDFFE8AFBF001430
-:105A5000AFB000108F500020000000000E0009368B
-:105A6000AF440020AF5000208FBF00148FB0001053
-:105A700003E0000827BD00183084FFFF8F4201B803
-:105A80000440FFFE3C074035008730253C031000F2
-:105A9000AF450180AF400184AF46018803E00008B4
-:105AA000AF4301B83084FFFF8F4201B80440FFFECE
-:105AB0003C074036008730253C031000AF4501808D
-:105AC000AF400184AF46018803E00008AF4301B84E
-:105AD00027BDFFD0AFB3001C3093FFFFAFB500244C
-:105AE000AFB20018AFBF0028AFB40020AFB10014B0
-:105AF000AFB0001030B5FFFF12600027000090210A
-:105B00008F90001C8E0300003C06800024020040A1
-:105B100000033E0200032C0230E4007F006688246C
-:105B20001482001D30A500FF8F8300282C68000A16
-:105B3000510000108F910014000358803C0C0800A5
-:105B4000258C58D0016C50218D490000012000089F
-:105B50000000000002B218213065FFFF0E00022491
-:105B600024040084162000028F90001CAF800028BF
-:105B70008F910014260C0020264B0001018080210B
-:105B80003172FFFF16200004AF8C001C0253282B3B
-:105B900014A0FFDC00000000024010218FBF00288D
-:105BA0008FB500248FB400208FB3001C8FB2001873
-:105BB0008FB100148FB0001003E0000827BD003043
-:105BC000240D003414AD00F600000000920B000E0E
-:105BD000240A16803C07000CA36B00219203000DE1
-:105BE0000347F8213C066000A363002096110012D1
-:105BF0003C057FFF34ACFFFFA771003C960200100C
-:105C0000240B00053054FFFFAF7400848E19001C74
-:105C1000AF4A00288FF800008CCF44480319702643
-:105C200001EE3021AF66004C8F69004C24CD00019D
-:105C30003C197F00AF6900508F640050AF6400547E
-:105C4000AF660070AF6D00588F6800582404005094
-:105C5000AF68005CA3600023AF6C0064A36B0037E7
-:105C60008E030014AF6300488F710048AF710024A9
-:105C70008E020018AF62006C9214000CA374003600
-:105C8000936A003E355F0020A37F003E8F7800744A
-:105C90000319782435EE4000AF6E0074936900005C
-:105CA000313000FF1204022B2418FF803C0408004E
-:105CB00024845CB80E000294000000002406000456
-:105CC000240700013C0408008C845CB8A366007DB6
-:105CD000A36700058F4A01780540FFFE24020002F9
-:105CE000AF440140A34201448F90001C3C141000BB
-:105CF000AF5401780A000373AF8000282CAD003741
-:105D000051A0FF9C8F9100140005A0803C18080052
-:105D1000271858F8029878218DEE000001C000087D
-:105D2000000000002406000614A600110000000078
-:105D30003C1F08008FFF5CB824040005AF5F002003
-:105D40008E190018AF7900188F78004CAF78001CBE
-:105D50008F6F0050122000C2AF6F00700A000373F3
-:105D6000AF840028240A000710AA00842403000638
-:105D70003C05080024A55CB80E00025E24040081E6
-:105D80008F90001C0011102B0A000373AF820028B3
-:105D90002402000414A2FFF6240A00503C09080063
-:105DA0008D295CB8AF4900208E040008AF64004024
-:105DB0008E060008AF6600448E07000CAF670048EF
-:105DC0008E0D0010AF6D004C8E080010AF6800847F
-:105DD0008E050014AF6500508E0C0018AF6C005497
-:105DE0008E0B001CAF6B005893740000328300FFD1
-:105DF000106A01ED000000008F6700488F660040C8
-:105E000000E6682305A000042404008C1620FFDEB1
-:105E100024020003240400823C05080024A55CB889
-:105E20000E000287000000008F90001C000010216F
-:105E30000A000373AF8200282404000514A4FFCCD9
-:105E4000240520003C1F08008FFF5CB8AF5F0020D6
-:105E50008E190004AF79005C921800082410000825
-:105E6000A37800218F8F001C91EE0009A36E002003
-:105E70008F86001C90C9000A312400FF109000108A
-:105E8000288A00091540006C24020002240C00201E
-:105E9000108C000B340580002885002114A0000818
-:105EA0002405400024080040108800053C0500013E
-:105EB000240D0080108D00023C05000224054000E6
-:105EC0008F6E00743C0FFF0001CF48240125802510
-:105ED000AF70007490C4000BA36400818F84001C19
-:105EE0009487000C10E0019300000000948E000CD9
-:105EF000241FFFBF24060004A76E003C9089000EFB
-:105F0000A369003E8F90001C9204000FA364003F21
-:105F10008F94001C8E8D00108F47007401A74023C2
-:105F2000AF6800608E850014AF650064968C001821
-:105F3000A76C0068968B001AA76B006A8E83001C02
-:105F4000AF63006C96820002A762013E928A000E47
-:105F5000A36A003E9379003E033FC02412200166ED
-:105F6000A378003E8F90001C0A000373AF860028C0
-:105F70002414002214B4FF7E240300073C0208000E
-:105F80008C425CB81220000CAF4200200A00037360
-:105F9000AF830028240C003310AC00142405002823
-:105FA0003C05080024A55CB80E00023024040081E2
-:105FB0000A0003F88F90001C3C04080024845CB89D
-:105FC0000E00029400000000936B000024110050AA
-:105FD000316300FF10710150000000008F90001C21
-:105FE000000018210A000373AF8300283C08080052
-:105FF0008D085CB824040081AF480020A3650034FC
-:106000003C05080024A55CB80E000230000000002A
-:106010008F90001C240200090A000373AF8200283D
-:1060200002B288213225FFFF0E00022424040084DE
-:106030000A0003738F90001C1082FFA12405040046
-:10604000288300031060016E240B00042414000157
-:106050005494FF9B240540000A00044724050100D6
-:106060003C04080024845CB88F62004C0E0002944B
-:106070008F6300508F90001C000020210A000373E2
-:10608000AF8400288E1000042404008AAF50002042
-:10609000936E000531C900021520015D0200282120
-:1060A0009378002302002821330F002015E00158C7
-:1060B0002404008D9362003F24190012305F00FF1A
-:1060C00013F90153240400810E0002500200202124
-:1060D00093740023240A0004020020213683004226
-:1060E000A36300230E000259A36A007D8F4B017841
-:1060F0000560FFFE24050002AF500140A3450144A6
-:106100008F90001C3C0C1000AF4C01780A0003F982
-:106110000011102B8E100004AF500020936D00056D
-:1061200031A80002550001782404008A9364003FDE
-:106130002407000402002821308600FF10C7001049
-:10614000240400810E00025002002021937F0023CE
-:1061500024180012240FFFFE37F90020A379002332
-:10616000A378003F936E00050200202101CF482450
-:106170000E000259A3690005020028210000202119
-:106180000E000340000000000A0003F88F90001C7E
-:106190008E0500043C0F0008034F4021AF4500204E
-:1061A000910E00002406005031C900FF1126017A2B
-:1061B000240400888F5901B80720FFFE3C0C400ED4
-:1061C000008C58253C031000AF450180AF4001848E
-:1061D000AF4B0188AF4301B891020000240AFF8051
-:1061E00024040004004AF825A11F00000E000C7FC3
-:1061F000240600300A0003F88F90001C8E0F000464
-:106200003C14080026945CB83C010800AC2F5CB834
-:10621000AF4F0020920E000331C90004112000028C
-:106220002402001224020006A362003F9203001B16
-:10623000240AFFC03062003F004AF825A37F003ED9
-:1062400092190003333800011700012200000000FA
-:106250008E020008AE8200083C0208008C425CC03E
-:106260001040012D00000000000221C2A7640008B8
-:106270008E0D000C240B000124140014AF6D002CB3
-:106280008E080010AF68003096050016A76500382C
-:10629000960C0014A76C003AAF6B000CA76B0010B3
-:1062A000A76B0012A76B0014A76B00161220014AFF
-:1062B000A37400349206000330C700022CF00001E2
-:1062C000260200088F90001C0A000373AF8200288A
-:1062D0008E14000424030081AF540020936800232F
-:1062E0003105001010A00113000000008F4401B818
-:1062F0000480FFFE3C06401F0011382B006610256D
-:106300003C111000AF540180AF870028AF400184DA
-:10631000AF420188AF5101B80A0003748F91001495
-:106320008E0600043C19000803592021AF460020C6
-:106330008E07000890980000240F0050331400FFCF
-:10634000128F0106240500888F4401B80480FFFEE7
-:106350003C0D40090011602B00AD10253C111000D0
-:10636000AF460180AF8C0028AF470184AF4201885F
-:10637000AF5101B80A0003748F9100148E04001C01
-:106380000E00023B00000000104000D700404821F2
-:106390008F90001C240500898F4D01B805A0FFFED9
-:1063A00000000000AF4901808E0F001C3C1440012A
-:1063B0000011702B00B448253C111000AF4F018430
-:1063C000AF8E0028AF490188AF5101B80A000374AD
-:1063D0008F910014961900023C14080026945CB8B2
-:1063E000333800041300008E3C0260008E1F001C36
-:1063F0003C010800AC3F5CB8AF5F0020920C00107D
-:10640000240B0014318400FF148B00AC000000004A
-:1064100096090002312D000115A001520000000074
-:106420008E020004AE8200083C0E08008DCE5CC0D7
-:1064300011C00148000000008F6900743C0E80000C
-:1064400024040001012E6825AF6D0074A3600005CF
-:10645000AF64000C3C0C08008D8C5CC08F88001C65
-:10646000A7640010000C59C2A7640012A7640014AE
-:10647000A7640016A76B00088D030008240400021F
-:10648000AF63002C8D0A000CAF6A0030910700103A
-:10649000A36700348F82001C90450011A36500356E
-:1064A0008F86001C90D00012A37000368F9F001CB6
-:1064B00093F90013A37900378F90001C96180014ED
-:1064C000A778003896140016A774003A8E0F0018AB
-:1064D000AF6F00245620FDA6AF8400283C050800BD
-:1064E00024A55CB80E00025E000020218F90001CE5
-:1064F0000A0004B6000020213C05080024A55CB871
-:106500000E000287240400828F90001C00003021BE
-:106510000A000373AF8600283C0408008C845CB832
-:106520000E001577000000008F90001C0A000490F8
-:10653000000018213C05080024A55CB80E00028765
-:106540002404008B8F90001C0011302B0A00037371
-:10655000AF8600283C1908008F395CB83C1F080042
-:106560008FFF005024CCFFFE033F782101F87024F8
-:10657000AF4E00283C0408008C845CB83C0908003D
-:106580008D2900500089682131A8007F011A282137
-:1065900000A78021AE0600D8AF9000D0AE0000DC8E
-:1065A0000A0003C2AE0C0108AF6000843C0508007D
-:1065B0008CA55CB83C0808008D080050240CFF80B6
-:1065C0003C02000C00A8A021028C5824AF4B0028EC
-:1065D0008E1F00143283007F007A50210142702107
-:1065E000ADDF00D88E190014AF8E00D0ADD900DC1D
-:1065F0008E180010270FFFFE0A000415ADCF01080A
-:10660000548BFE2F240540000A0004472405100087
-:106610000E000335000000000A0003F88F90001CF4
-:106620008C46442C3C056C6234B079703C01080007
-:10663000AC205CB814D00008240400029788003411
-:10664000978A002C02802821010A382B10E00011C3
-:1066500024040092240400020E000C9D2405014035
-:106660003C010800AC225CB8AF4200203C030800AB
-:106670008C635CB810600005240400830E00086879
-:106680000000000010400009240400833C050800BD
-:1066900024A55CB80E00025E000000008F90001C74
-:1066A0000011202B0A000373AF8400280E00086C31
-:1066B000000000000A0005968F90001C0E00087074
-:1066C000000000003C05080024A55CB80A00063C58
-:1066D0002404008B8E0400080E00023B0000000022
-:1066E0000A00052DAE820008240400040E000C9D53
-:1066F000240500301440003F004048218F90001CCA
-:106700000A00057D240500830E00034002002821B5
-:106710000A0004E2000000003C05080024A55CB863
-:106720000E000230240400878F90001C0A000549E7
-:106730000011102B0E0002500280202193700023C4
-:1067400002802021360D00100E000259A36D002397
-:106750008F90001C0A000552000018219205000CC1
-:1067600030BF000113E00003000000009602000E9D
-:10677000A482002C920A000C314800021100FEF2A3
-:1067800000002821960B00128E030014A48B001A1F
-:106790000A000569AC83001C8F8300388F870030A6
-:1067A0001067FE84000020213C09080025295C3C7C
-:1067B000000320C0008930218CD400001285005EC7
-:1067C000247800013303000F5467FFFA000320C050
-:1067D0000A000504000020213C05080024A55CB83F
-:1067E0000E000287240400828F90001C0A000549D5
-:1067F000000010213C0B0008034B20212403005013
-:10680000240A0001AF420020A0830000A08A0001FA
-:106810008F88001C91070004A08700188F82001C3D
-:1068200090450005A08500198F86001C90DF0006AA
-:10683000A09F001A8F99001C93380007A098001B96
-:106840008F94001C928F0008A08F001C8F90001C5A
-:10685000920E0009A08E001D8F8D001C91AC000AC5
-:10686000A08C001E8F8B001C3C0C0800258C5C3C0F
-:106870009163000B3C0B0800256B5C38A083001F64
-:106880008F8A001C9148000CA08800208F87001C74
-:1068900090E5000DA08500218F82001C240546464E
-:1068A0009046000EA08600228F9F001C93F9000FD7
-:1068B000A09900238F98001C93140010A09400242A
-:1068C0008F8F001C91F00011A09000258F90001C6C
-:1068D0008F8E00308F990038960D0014000E18C06E
-:1068E00025C80001A48D0028960A0016006C3021EE
-:1068F000006BF821A48A002A960700183108000FBF
-:10690000A487002CA485002E8E02001CACC90000B8
-:10691000AF88003011190003AFE200000A00057DC6
-:1069200000002821250C00013184000F00002821DF
-:106930000A00057DAF8400383C07080024E75C3876
-:106940000087802100002021ACC000000A0005045F
-:10695000AE0000003C05080024A55CB80A00063C17
-:10696000240400878E0400040E00023B0000000097
-:106970000A0005A1AE8200083084FFFF30C600FF88
-:106980008F4201B80440FFFE000644000104302598
-:106990003C07200000C720253C031000AF400180C9
-:1069A000AF450184AF44018803E00008AF4301B85C
-:1069B00027BDFFE8AFB00010AFBF00143C07600078
-:1069C000240600021080000600A080210010102B79
-:1069D0008FBF00148FB0001003E0000827BD00181F
-:1069E0003C09600EAD2000348CE5201C8F82001C19
-:1069F0002408FFFC00A81824ACE3201C0E0006F5B8
-:106A00008C45000C0010102B8FBF00148FB00010AD
-:106A100003E0000827BD00183C02600E3447010067
-:106A200024090018274A04000000000000000000AC
-:106A3000000000003C06005034C30200AF440038A0
-:106A4000AF45003CAF430030014018218F4B0000A0
-:106A5000316800201100FFFD2406007F2408FFFF9D
-:106A60008C6C000024C6FFFF24630004ACEC000023
-:106A700014C8FFFB24E70004000000000000000031
-:106A8000000000003C0F0020AF4F0030000000006D
-:106A900024AD020001A5702B2529FFFF008E2021C7
-:106AA0001520FFE101A0282103E0000800000000FC
-:106AB00027BDFFE0AFB10014AFBF0018AFB00010AA
-:106AC0003C05600E8CA20034008088211440000632
-:106AD0003C0460008C87201C2408FFFC00E8302464
-:106AE00034C30001AC83201C8F8B001C24090001DF
-:106AF000ACA90034956900028D6500148D70000CFE
-:106B00002D2400818D6700048D6600081080000729
-:106B10008D6A00102D2C00041580000E30CE000769
-:106B2000312D000311A0000B000000002404008B95
-:106B3000020028210E0006F5240600030011102B88
-:106B40008FBF00188FB100148FB0001003E0000851
-:106B500027BD002015C0FFF62404008B3C03002055
-:106B6000AF4300300000000024020001AF82001497
-:106B70000000000000000000000000003C1F015069
-:106B8000013FC825253800033C0F600EAF47003891
-:106B900000181882AF46003C35E8003CAF59003081
-:106BA000274704008F4400003086002010C0FFFDFE
-:106BB00000000000106000082466FFFF2403FFFFB0
-:106BC0008CEB000024C6FFFF24E70004AD0B00009F
-:106BD00014C3FFFB250800043C08600EAD09003813
-:106BE0000000000000000000000000003C07002042
-:106BF000AF470030000000000E00071D01402021BB
-:106C000002002821000020210E0006F524060003C2
-:106C10000011102B8FBF00188FB100148FB000101F
-:106C200003E0000827BD002027BDFFD8AFB2001841
-:106C30003092FFFFAFB10014AFBF0020AFB3001C14
-:106C4000AFB000101240002C000088210A0007B5E8
-:106C50002413000150B300408CE5000C0000000D2F
-:106C6000263900013331FFFF24F800200232382B8F
-:106C700010E00021AF98001C8F8200141440001E09
-:106C80008F87001C3C0670003C0320008CE4000051
-:106C90000086282414A300188F85003C00044402B9
-:106CA0003C0980000089802414A0FFEA310600FF1F
-:106CB000240A000210CA002E28CB0003116000161F
-:106CC000240C000314D3FFE7263900010200282119
-:106CD0000E000703240400018F87001CAF82003CD4
-:106CE000263900013331FFFF24F800200232382B0F
-:106CF00014E0FFE1AF98001C022010218FBF00209C
-:106D00008FB3001C8FB200188FB100148FB0001029
-:106D100003E0000827BD002810CC001A240D000451
-:106D200014CDFFD026390001308EFFFF000E19C0B0
-:106D30008F4401B80480FFFE3C0F10003C1020047B
-:106D4000AF430180AF400184AF500188AF4F01B81D
-:106D50000A0007B0263900010E0006F5240400845D
-:106D60001600FFBF8F87001C0A0007AFAF80003CF2
-:106D7000020028210E000703000020210A0007CE90
-:106D80008F87001C0E000743020020218F87001C04
-:106D90000A0007CFAF82003C3082FFFF144000039F
-:106DA000000018210004240224030010308500FF95
-:106DB00014A000053087000F24660008000422029A
-:106DC00030C300FF3087000F14E000053089000356
-:106DD0002468000400042102310300FF308900030D
-:106DE00015200005388B0001246A0002000420826F
-:106DF000314300FF388B0001316400011080000234
-:106E0000246C0001318300FF03E0000800601021C2
-:106E1000308BFFFF000B394230E600FF3C090800D1
-:106E200025295BB800064080010960218D8700009C
-:106E30003164001F240A0001008A180430A500FFF5
-:106E400000E3202514A000020003102700E2202404
-:106E5000240F000100CF700401096821000E2827CB
-:106E600014800005ADA400008F86000C00A610243D
-:106E700003E00008AF82000C8F88000C01C81025C9
-:106E800003E00008AF82000C3C06001F3C036000DA
-:106E90003084FFFF34C5FF8024020020AC6020084E
-:106EA000AC60200CAC602010AC652014AC642018E1
-:106EB000AC622000000000000000000003E00008B9
-:106EC0000000000027BDFFE82402FFFFAFBF001055
-:106ED000AF82000C000020213C06080024C65BB8ED
-:106EE0002405FFFF24890001000440803124FFFFB6
-:106EF000010618212C87002014E0FFFAAC65000081
-:106F00000E00083900002021240200013C0460002A
-:106F100024050020AC822018AC8520000000000071
-:106F20000000000000000000244A00013142FFFF81
-:106F30002C46040014C0FFF78FBF001003E00008C8
-:106F400027BD00188F8300082C62040003E00008AE
-:106F5000384200018F8300082462000103E000082A
-:106F6000AF8200088F8300082462FFFF03E000085F
-:106F7000AF82000827BDFFE0AFB10014AFBF00181B
-:106F8000AFB000108F6B00303C066000008088219D
-:106F9000ACCB20088F6A002C3C0280002403000840
-:106FA000ACCA200C9769003A9768003800092C0099
-:106FB0003107FFFF00A72025ACC42010ACC220146D
-:106FC000ACC3200000000000000000000000000032
-:106FD0003C0360008C6D200031AC00081580FFF987
-:106FE000000000008C6E201405C00020000000008E
-:106FF0000E0007FD8F84000C000240803C09080051
-:1070000025295BB8010938218CE400000E0007FD3A
-:1070100000028140020220213090FFFF0200202167
-:107020000E00081B000028213C0C8000022C582573
-:107030003210FFFF3C116000240A0020AE2B201408
-:10704000AE302018AE2A2000000000000000000032
-:1070500000000000020010218FBF00188FB1001443
-:107060008FB0001003E0000827BD00208C662014BC
-:107070003C02001F3443FF803C1FFFE800C3C024D4
-:1070800037F9080003198021001079C23C0C8000F8
-:10709000022C582531F0FFFF3C116000240A00202B
-:1070A000AE2B2014AE302018AE2A200000000000C5
-:1070B0000000000000000000020010218FBF001837
-:1070C0008FB100148FB0001003E0000827BD00202E
-:1070D00027BDFFE8AFB000103402FFFF3090FFFF84
-:1070E000AFBF001412020006020020210E00083972
-:1070F00000000000020020210E00081B24050001F2
-:107100008F8400088FBF00148FB000102483FFFF0E
-:1071100027BD001803E00008AF830008000439C24F
-:1071200030E6003F00043B420007184024021000F4
-:107130002CC4002024C8FFE0AF42002C24630001CF
-:107140001480000330A900FF00071840310600FF3B
-:107150000003608024080001019A58213C0A000EB7
-:1071600000C82804016A38211120000500053027D5
-:107170008CE900000125302503E00008ACE60000A2
-:107180008CEE000001C6682403E00008ACED0000AE
-:1071900027BDFFE8AFBF0014AFB000103C04600093
-:1071A0008C8508083403F00030A2F000504300063C
-:1071B000240200018C8708083404E00030E6F00067
-:1071C00010C4001E24020002AF8200403C10600088
-:1071D0003C0A0200AE0A0814240910003C08000E04
-:1071E0008E03440003482021AF49002C24050120D0
-:1071F0000E000CE3000030218F830040106000047B
-:107200003C021691240B0001106B000E3C023D6CF9
-:10721000344F0090AE0F44088FBF00148FB00010A1
-:107220003C0C6000240E10003C0D020027BD00182D
-:10723000AD8E442003E00008AD8D08100A00090A55
-:10724000AF8000403C0218DA344F0090AE0F440883
-:107250008FBF00148FB000103C0C6000240E100093
-:107260003C0D020027BD0018AD8E442003E000084D
-:10727000AD8D08100A0008DE240500010A0008DEB2
-:10728000000028213C08080025085FC42404FFFFF3
-:10729000010018212402001E2442FFFFAC640000FC
-:1072A0000441FFFD246300043C07080024E760401C
-:1072B0008CE5FFFC2404001C24060001308A001F1A
-:1072C0000146480424840001000910272C83002073
-:1072D0001460FFFA00A22824ACE5FFFC3C056666BA
-:1072E00034A4616E3C06080024C66100AF840058D7
-:1072F000AF88009C2404FFFF00C018212402001F57
-:107300002442FFFFAC6400000441FFFD246300043D
-:107310003C0766663C05080024A560C0AF860048AF
-:1073200034E6616EAF8600982404FFFF00A01821A8
-:107330002402000F2442FFFFAC6400000441FFFD63
-:10734000246300043C0B66663C06080024C66040CB
-:107350003568616EAF8500A4AF8800702404FFFF1C
-:1073600000C018212402001F2442FFFFAC6400006B
-:107370000441FFFD246300043C0D66663C0A0800DE
-:10738000254A618035AC616EAF860090AF8C005CA1
-:107390002404FFFF01401821240200032442FFFFC0
-:1073A000AC6400000441FFFD246300043C090800B4
-:1073B000252961908D27FFFC240400062405000187
-:1073C0003099001F0325C004248400010018782789
-:1073D0002C8E002015C0FFFA00EF3824AD27FFFCEB
-:1073E0003C09666624030400240403DC240502002F
-:1073F000240600663522616E3C08080025085CC43E
-:10740000AF820074AF830044AF83006CAF83005041
-:10741000AF830084AF8A008CAF840064AF85004CDA
-:10742000AF860054AF840078AF850060AF860080DF
-:1074300001001821240200022442FFFFAC6000007A
-:107440000441FFFD24630004240400032403000C12
-:107450003C0A0800254A5CD0AF8A00680A0009B1DE
-:107460002405FFFF000418802484000100685821CF
-:107470002C8700C014E0FFFBAD6500003C0E666683
-:1074800035CD616E240C17A024081800AF8D00883C
-:10749000AF8C009403E00008AF88007C2484007F58
-:1074A000000421C2000040210000302100003821EA
-:1074B000000028210A0009C8AF8400A0106000065F
-:1074C00024E7000100C4302124A500012CC20BF5E3
-:1074D0001440FFFA2CA300663C09080025296180AE
-:1074E00001201821240200032442FFFFAC600000A9
-:1074F0000441FFFD2463000410E0001A24E3FFFFB1
-:107500000003294210A0000A000020212406FFFFEA
-:107510003C03080024636180248400010085502B13
-:10752000AC660000250800011540FFFB2463000441
-:1075300030E2001F1040000800086880240C0001A1
-:10754000004C3804000858800169282124E6FFFF18
-:1075500003E00008ACA6000001A940212409FFFFB8
-:10756000AD09000003E0000800000000AF4400285F
-:107570003C04000C03442021000528820A000CE38F
-:1075800000003021000421803C036000AC6410083E
-:107590000000000000052980AC65100C0000000010
-:1075A00003E000088C62100C27BDFFE80080282152
-:1075B00024040038AFBF00140E0009F8AFB000106B
-:1075C00024040E00AF4400283C10000C035020217E
-:1075D000240500100E000CE30000302103501021A0
-:1075E000AC400000AC400004240400388FBF0014FD
-:1075F0008FB0001024053FFF27BD00180A0009F8CE
-:107600008C430000000421803C036000AC6410083F
-:10761000000000008C62100C03E0000800021182E0
-:1076200027BDFFC8AFB400208F940068AFBE003004
-:10763000AFB7002CAFB600280000B8210080B02101
-:10764000241E00C0AFBF0034AFB50024AFB3001C90
-:10765000AFB20018AFB10014AFB000100A000A3585
-:10766000AFA5003C504000018F94006827DEFFFF6B
-:1076700013C00028269400048E9200003C030800EA
-:1076800024635FC01240FFF70283102B3C04080004
-:1076900024845CC4028410230002A8C00000982146
-:1076A0000A000A442411000100118840122000261B
-:1076B0000000000002B38021025128240200202192
-:1076C00010A0FFF9267300010E000A01000000005F
-:1076D0000016684032EC000101AC20210E0009F8D0
-:1076E000020028218F89009426F700018FA6003C14
-:1076F0003AEB0001316A00012528FFFF001138270D
-:1077000002CAB021AF88009416E6FFE70247902432
-:10771000AE92000002E010218FBF00348FBE003017
-:107720008FB7002C8FB600288FB500248FB40020AF
-:107730008FB3001C8FB200188FB100148FB00010EF
-:1077400003E0000827BD00383C0E080025CE5FC0CE
-:10775000028E102B0A000A30AE92000027BDFFD81F
-:10776000AFB10014AFB00010AFBF0020AFB3001C2A
-:10777000AFB2001800A0882110A0001F00048040B4
-:107780003C13080026735CC40A000A7D2412000121
-:1077900012200019261000010E000A1802002021F4
-:1077A000000231422444FFA0000618803045001F2B
-:1077B0002C8217A1007318212631FFFF1040FFF41F
-:1077C00000B230048C6900000200202124053FFF34
-:1077D000012640241500FFEE012638250E0009F889
-:1077E000AC6700008F8A0094261000012547000135
-:1077F0001620FFE9AF8700948FBF00208FB3001CD5
-:107800008FB200188FB100148FB0001003E0000891
-:1078100027BD00288F85009C008058210000402152
-:1078200000004821240A001F3C0C0800258C603C05
-:107830003C0D080025AD5FC48CA6000050C00014AC
-:107840000000402100AD1023000238C024030001D5
-:107850000A000AB6000020211500000300E41021F0
-:10786000244820240000482125290001512B001321
-:107870002506DFDC106000062484000100C37024AC
-:1078800015C0FFF5000318400A000AB400004021AB
-:1078900010AC002624A3000400602821254AFFFF25
-:1078A0001540FFE5AF85009C512B00042506DFDC69
-:1078B0000000402103E000080100102100066142A1
-:1078C00030C5001F000C50803C07080024E75FC44F
-:1078D00024040001014730211120000F00A42004DE
-:1078E0003C05080024A56040148000052529FFFF01
-:1078F00024C6000410C5001100000000240400018B
-:107900008CCF00000004C0270004204001F8682448
-:107910001520FFF5ACCD00008F99007801001021F3
-:10792000032B482303E00008AF8900783C050800DA
-:1079300024A55FC40A000ABE000040213C060800DE
-:1079400024C65FC40A000AD724040001308800FF5F
-:10795000240200021102000A240300031103005C48
-:107960008F8900A4240400041104005F240500058D
-:10797000110500670000182103E0000800601021D5
-:107980008F8900483C0C0800258C61003C040800ED
-:1079900024846180240300201060000F000058211F
-:1079A000240D0002240E00033C0F080025EF6100A7
-:1079B0008D27000014E0000B30F9FFFF252900049B
-:1079C0000124C02B53000001018048212463FFFFE4
-:1079D0005460FFF88D2700000160182103E00008C3
-:1079E00000601021132000323C0500FF30E200FF50
-:1079F00000403021104000420000502124050001C9
-:107A0000000020210005C84000A6C0241700000384
-:107A1000332500FF14A0FFFB24840001012CC023A8
-:107A2000001828C000AA6021008C50213144001F9A
-:107A3000240C0001008C18040003102700E23024FD
-:107A4000110D0041AD260000110E004C000A184037
-:107A5000110D00368F87006C510E00568F8C006020
-:107A6000240D0004110D005A8F8E0084240E000591
-:107A7000150EFFDA01601821240B143011400006A6
-:107A8000000018218F8400A024630001006A402BAD
-:107A90001500FFFD016458218F8A0080AF89008C9A
-:107AA000016018212549FFFF0A000B0EAF890080F5
-:107AB00000E52024000736021080FFD0240A0018B9
-:107AC00000075402314600FF0A000B16240A00107A
-:107AD0003C0C0800258C60C03C0408002484610034
-:107AE0000A000AFD240300103C0C0800258C6040AD
-:107AF0003C040800248460C00A000AFC8F890090BE
-:107B000000071A02306600FF0A000B16240A00085C
-:107B10008F89008C3C0C0800258C61803C04080097
-:107B2000248461900A000AFD24030004000A4080B6
-:107B3000250B003024E6FFFF01601821AF890048C3
-:107B40000A000B0EAF86006C000AC982001978800B
-:107B50003C07080024E760C001E72021000A184222
-:107B60008C8F00003079001F032C38040007C027D9
-:107B700001F860240A000B2BAC8C0000000331429A
-:107B80000006288000AF28213062001F8CB800005A
-:107B900024630001004CC804000321420019382767
-:107BA0000004108003073024004F20210A000B6FCF
-:107BB000ACA60000000A68C025AB0032258AFFFF92
-:107BC00001601821AF8900A40A000B0EAF8A006083
-:107BD000254B1030AF8900900160182125C9FFFFA7
-:107BE0000A000B0EAF890084308600072CC2000605
-:107BF0001040001400000000000640803C03080014
-:107C0000246359D4010338218CE40000008000086B
-:107C1000000000002409000310A9000E000000006D
-:107C2000240A000510AA000B00000000240B00012C
-:107C300010AB0008000000008F8C00A010AC000505
-:107C40000000000003E00008000010210A000A9C68
-:107C500000A020210A000AEA00C0202127BDFFE879
-:107C6000308400FF240300021083000BAFBF00101C
-:107C7000240600031086003A2408000410880068D7
-:107C8000240E0005108E007F2CAF14308FBF001023
-:107C900003E0000827BD00182CA200301440FFFCB0
-:107CA0008FBF001024A5FFD0000531C200066880F8
-:107CB0003C07080024E7610001A730218CC90000BF
-:107CC0000005288230AC001F240B0001018B5004FA
-:107CD0008F840048012A4025ACC800008C83000036
-:107CE00050600001AF8600488F98006C30AE0001F4
-:107CF00024A6FFFF270F000115C00002AF8F006C04
-:107D000024A60001000641420008208000871821B7
-:107D10008C79000030C2001F240600010046F804E0
-:107D2000033F382410E0FFDA8FBF00100005C18246
-:107D3000001870803C0F080025EF60C001CF48217B
-:107D40008D2B00000005684231A5001F00A66004CD
-:107D5000016C502527BD001803E00008AD2A000083
-:107D60002CA7003014E0FFCA8FBF001030B9000705
-:107D70001723FFC724A8FFCE00086A02000D608009
-:107D80003C0B0800256B60C0018B30218CC40000C7
-:107D9000000828C230AA001F240800010148480436
-:107DA0008F8200A400891825ACC300008C5F0000FE
-:107DB00053E00001AF8600A400057040000E794238
-:107DC000000F28803C0408002484610000A41821CE
-:107DD0008C6B000025DF000131CD001F001F5142D8
-:107DE00001A86004016C4825000A1080AC690000FD
-:107DF000004428218CA600008F98006033F9001FF2
-:107E00008FBF00100328380400C77825270E000113
-:107E100027BD0018ACAF000003E00008AF8E006083
-:107E200024A5EFD02CB804001300FF998FBF0010D9
-:107E300000053142000658803C0A0800254A60408F
-:107E4000016A30218CC4000030A3001F2409000106
-:107E5000006910048F9900900082F825ACDF0000C3
-:107E60008F27000050E00001AF8600908F8D0084C6
-:107E70008FBF001027BD001825AC000103E00008EB
-:107E8000AF8C008415E0FF828FBF00108F8600A0AA
-:107E9000000610400046F821001F210003E4C8211D
-:107EA0000019384024F8143000B8402B1100FF7836
-:107EB0008FBF001024A4EBD00E00020D00C02821BB
-:107EC00000027942000F70803C0D080025AD6180F2
-:107ED00001CD20218C8B0000304C001F24060001B6
-:107EE000018618048F89008C01635025AC8A00003C
-:107EF0008D25000050A00001AF84008C8F98008079
-:107F00008FBF001027BD00182708000103E00008FC
-:107F1000AF88008030A500072403000310A30010E1
-:107F200028A20004144000082407000224030004CF
-:107F300010A300152408000510A8000F8F8500A0CD
-:107F400003E000080000000014A7FFFD00802821C6
-:107F500014C3FFFB240400020A000BAE0000000063
-:107F6000240900050080282110C9FFFB2404000318
-:107F700003E000080000000014C5FFF10080282184
-:107F80000A000BAE24040005240A00010080282109
-:107F900010CAFFF12404000403E000080000000000
-:107FA00027BDFFE0AFB00010000581C22603FFD05F
-:107FB00024C5003F2C6223D024C6007FAFB2001836
-:107FC000AFB10014AFBF001C309100FF000691C29A
-:107FD0000005298202002021104000082403FFFF31
-:107FE0000E000A6E0000000002002021022028215D
-:107FF0000E000C5C02403021000018218FBF001CD5
-:108000008FB200188FB100148FB0001000601021E3
-:1080100003E0000827BD002027BDFFD824A2007F71
-:10802000AFB3001CAFB20018000299C2309200FF3B
-:1080300024A3003F0240202102602821AFB1001498
-:10804000AFB00010AFBF00200E000B91000389827B
-:1080500000408021004020210220282114400009F6
-:10806000000018218FBF00208FB3001C8FB20018B2
-:108070008FB100148FB000100060102103E00008E1
-:1080800027BD00280E000A1F000000000040282124
-:10809000020020211051FFF3001019C00E000A6EDB
-:1080A0000000000002002021024028210E000C5C8C
-:1080B000026030218FBF00208FB3001C8FB20018E8
-:1080C0008FB100148FB00010000018210060102143
-:1080D00003E0000827BD00283084FFFF30A5FFFF24
-:1080E00010800007000018213082000110400002BB
-:1080F00000042042006518211480FFFB0005284081
-:1081000003E000080060102110C00007000000001C
-:108110008CA2000024C6FFFF24A50004AC8200004E
-:1081200014C0FFFB2484000403E0000800000000EA
-:1081300010A0000824A3FFFFAC8600000000000090
-:10814000000000002402FFFF2463FFFF1462FFFA17
-:108150002484000403E000080000000030A5FFFFB5
-:108160008F4201B80440FFFE3C07601500A7302590
-:108170003C031000AF440180AF400184AF4601884A
-:1081800003E00008AF4301B88F8500D02C86400083
-:10819000008018218CA700840087102B1440001049
-:1081A000000000008CA800842D06400050C0000F85
-:1081B000240340008CAA0084008A482B512000012F
-:1081C0008CA3008400035A42000B20803C05080069
-:1081D00024A55A400085182103E000088C620000A5
-:1081E00014C0FFF4000000002403400000035A42C2
-:1081F000000B20803C05080024A55A40008518216A
-:1082000003E000088C6200008F8300D0906600D0ED
-:1082100024C50001A06500D08F8500D0906400D0F7
-:1082200090A200D21044001700000000936C007868
-:108230008F8B00BC318A00FFA16A000C2549000128
-:10824000938700C4312200FF3048007F1107000BE4
-:1082500000026827A36200788F4E017805C0FFFEF8
-:108260008F9900B0241800023C0F1000AF59014054
-:10827000A358014403E00008AF4F01780A000D2C19
-:1082800031A20080A0A000D00A000D220000000052
-:1082900027BDFFD8AFB200188F9200B8AFBF002043
-:1082A000AFB3001CAFB00010AFB100148F9300B497
-:1082B0008E5900283C1000803C0EFFEFAE79000084
-:1082C0008E580024A260000A35CDFFFFAE7800046E
-:1082D0009251002C3C0BFF9F356AFFFFA271000CEE
-:1082E0008E6F000C3C080040A271000B01F060256D
-:1082F000018D4824012A382400E83025AE66000CA0
-:108300008E450004AE6000183C0400FFAE6500140A
-:108310008E43002C3482FFFFA66000080062F82420
-:10832000AE7F00108E5900088F9000B0964E00125C
-:10833000AE7900208E51000C31D83FFF00187980B3
-:10834000AE7100248E4D001401F0602131CB00018C
-:10835000AE6D00288E4A0018000C41C2000B4B8005
-:10836000AE6A002C8E46001C01093821A667001C4D
-:10837000AE660030964500028E440020A665001EC1
-:10838000AE64003492430033306200045440000570
-:10839000924600008F8300D08C7F007CAE7F00303F
-:1083A000924600008F8500BCA0A6000092440033D6
-:1083B0003082000250400007924E00018F8700BCBF
-:1083C000240AFF8090E90000012A4025A0E800006F
-:1083D000924E00018F8D00BC2409FFBF2404FFDFF3
-:1083E000A1AE00018F8A00BC914C000D318B007F43
-:1083F000A14B000D8F8600BC90C8000D01093824E8
-:10840000A0C7000D8F9100BC8E6500149223000D53
-:108410002CA200010002F9400064C824033FC025DB
-:10842000A238000D8F8800BC965000128F8700D0B4
-:10843000A51000028E45000490ED00BC30AF000393
-:10844000000F702331CC000300AC102131AB0002CF
-:1084500015600002244400342444003090F100BC34
-:1084600000B18024320F000415E0000224830004D0
-:10847000008018218F8900AC240A0002AD0300049B
-:10848000A12A00009248003F8F8700ACA0E80001BD
-:108490008F9100AC9246003F8E440004A626000255
-:1084A0009765003C0E000CF930B0FFFF000213800E
-:1084B000005020253C0342000083F825AE3F000415
-:1084C0008F8500AC8E590038ACB900188E58003436
-:1084D000ACB8001CACA0000CACA00010A4A0001410
-:1084E000A4A00016A4A00020A4A00022ACA00024F8
-:1084F0008E62001450400001240200018FBF002052
-:108500008FB3001C8FB200188FB100148FB0001011
-:10851000ACA200080A000D1927BD00288F8600D0E4
-:1085200027BDFFD0AFBF002CAFB60028AFB50024E9
-:10853000AFB40020AFB3001CAFB20018AFB100144D
-:10854000AFB0001094C300E094C200E210430041B9
-:108550002405FFFF3C16000E90C400D090C800D147
-:10856000309200FF310400FF0244382B10E0004439
-:1085700026490001108900378F9800B03C0508009B
-:108580008CA5005C2414FF8000B86021019468244D
-:10859000AF4D002C94CA00E2318B007F017A482154
-:1085A00031447FFF01364021000410400048A821DB
-:1085B00096A700003C1F08008FFF005830F53FFFD2
-:1085C0000015198003E3C821031988213233007F85
-:1085D000027A782102348024AF50002C01F69821D1
-:1085E000926E000D31C5000410A00048000000008C
-:1085F00094C300E294C300E294D800E22404800013
-:10860000307F7FFF27F9000133317FFF030480248F
-:1086100002117825A4CF00E294CE00E23C120800BB
-:108620008E52006031D47FFF129200DF0000000004
-:108630008E720018000028212646FFFFAE66002C2F
-:108640008F8600D094C800E094C900E21528FFC2CC
-:10865000000000008FBF002C8FB600288FB50024CB
-:108660008FB400208FB3001C8FB200188FB100149C
-:108670008FB0001000A0102103E0000827BD0030DB
-:1086800090CD00D2264A000131AC00FF008C582169
-:10869000116AFFF08F9800B03C0508008CA5005CC3
-:1086A0002414FF8000B8602101946824AF4D002C91
-:1086B00094CA00E2318B007F017A482131447FFF68
-:1086C00001364021000410400048A82196A7000070
-:1086D0003C1F08008FFF005830F53FFF0015198040
-:1086E00003E3C821031988213233007F027A7821FD
-:1086F00002348024AF50002C01F69821926E000DB8
-:1087000031C5000414A0FFBA000000008E660010FE
-:108710000012C0C08E6E00300012914002587821C5
-:10872000036F582100CE6823256C008824020002C4
-:10873000AE6D0010AF8C00ACA1620088976A003C5F
-:108740008E6400308F9100AC0E000CF93150FFFFA9
-:1087500000022380009048253C034200012340256D
-:10876000AE2800048E6700048F8C00AC8E7F000062
-:10877000240D0008AD87001CAD9F0018AD80000CD3
-:10878000AD8000109265000A30B900FFA599001471
-:10879000967800083C05000CA59800169271000A16
-:1087A000322F00FFA58F00209670000824110005CD
-:1087B000A5900022AD800024926E000B2410C00012
-:1087C00031C600FFA5860002A18D00018E6B00302E
-:1087D0008F8200AC8F8800B0AC4B00083C0A0800C8
-:1087E0008D4A00540148202100944824AF490028B4
-:1087F0003C0308008C6300540068382130FF007F80
-:1088000003FAC8210325C02102587821AF8F00BC8C
-:10881000AF9800C0A1F100008F8B00BC2403FFBF04
-:108820002405FFDF956E000201D0A024029590255B
-:10883000A57200029166000230CD003F35AC0040C9
-:10884000A16C00028F8800BC8F8200D03C0C7FFF9F
-:10885000AD0000048C4A007C358BFFFF3C02800099
-:10886000AD0A00089104000D3089007FA109000DB8
-:108870008F9F00BC93F5000D02A33824A3E7000DE1
-:108880008F9100BC9239000D0325C024A238000D41
-:108890008E6F00348F8D00BCADAF00108E6E002C3B
-:1088A0008E70003001D0A023ADB4001491B2001836
-:1088B0003246007FA1A600188F8700BC8E6A003068
-:1088C0008CE40018014B4824008240240109A825AB
-:1088D000ACF500189263000AA0E3001C967F000824
-:1088E0008F8500BC8F9900D0A4BF001E8E70003011
-:1088F0008E6400300E00020D8F2500848F8500D01D
-:10890000000289400002C10090AE00BC023878210C
-:108910000040302131D4000212800003020F802178
-:108920000002A8800215802190B200BC32540004DD
-:10893000128000020006C880021980218E6F00306C
-:108940008F8B00BC2406800031EE0003000E6823EC
-:1089500031AC0003020C1021AD62000494A400E2CB
-:1089600094AA00E294A300E231507FFF26040001A4
-:1089700030897FFF0066402401098825A4B100E208
-:1089800094A700E23C1308008E73006030FF7FFF65
-:1089900013F30012000000000E000D19000000008B
-:1089A0000A000E270000282194CD00E201A46024D3
-:1089B000A4CC00E290CB00E290C200E2316A00FF5A
-:1089C000000A49C200092027000441C03055007F39
-:1089D00002A838250A000E23A0C700E294B100E2E5
-:1089E00002263824A4A700E290BF00E290B400E27F
-:1089F00033F300FF0013C9C2001990273298007F9B
-:108A00000012A9C0031530250E000D19A0A600E222
-:108A10000A000E27000028213084FFFF30A5FFFF49
-:108A2000AF440018AF45001C03E000088F4200145B
-:108A300027BDFFB0AFB000288F9000D0AFB4003892
-:108A4000AFBF004CAFBE0048AFB70044AFB6004068
-:108A5000AFB5003CAFB30034AFB20030AFB1002CC3
-:108A6000A7A00014920600D1920500D03094FFFF19
-:108A700030C400FF30A300FF0064102BA7A0001E2D
-:108A800010400071AFA00010920900D00014982B84
-:108A9000312800FF0088382324F2FFFF0012882BC2
-:108AA0000233782451E000758FB20010961800123E
-:108AB000961900100014F4000319B8230017B4002D
-:108AC000001614030282A82A16A00002001E240326
-:108AD000004020210244F82B13E0000200801821FE
-:108AE000024018210003340000061C033065FFFF1C
-:108AF0002CA20009144000020060982124130008F1
-:108B00008E090008001359808E08000C3164FFFFA5
-:108B10003C0A0010008A3825274A0400AF49003873
-:108B2000AF8A00B8AF48003CAF47003000000000FB
-:108B30000000000000000000000000000000000035
-:108B40000000000000000000000000008F4D000049
-:108B500031AC00201180FFFD0013702A01D11024D8
-:108B60000000A821104001C0000000008F9800B054
-:108B70003C0B08008D6B00542411FF80921E00D026
-:108B80000178202100911024921900D0AF420028D2
-:108B90008D4500103C0608008CC600583C170800A4
-:108BA0008EF7005430A73FFF0007198000C3402113
-:108BB000030820210091F824920B00D0AF5F002C15
-:108BC0009148000033D600FF332F00FF02F87021D8
-:108BD00000166140000F68C031C9007F018D382147
-:108BE000013A2821316300FF3086007F3C02000CEF
-:108BF00000A2B021000389400367C82100DAF821F0
-:108C00003108003F3C1E000E0236B821273800888C
-:108C100003FE88212D0F0008AF9800ACAF9700BC71
-:108C2000AF9600C011E0018FAF9100B400086880DA
-:108C30003C0E080025CE59EC01AE60218D89000064
-:108C40000120000800000000920E00D2920D00D01A
-:108C50000014982B31CA00FF31AC00FF008C582360
-:108C6000014B20212492FFFF0012882B023378242D
-:108C700015E0FF8E000000008FB200108FBF004C87
-:108C80008FBE00483A4200018FB700448FB60040C3
-:108C90008FB5003C8FB400388FB300348FB20030F2
-:108CA0008FB1002C8FB0002803E0000827BD0050D2
-:108CB000915800013317002012E00204241600012D
-:108CC000921F00BC0000B02133F900011320000DF9
-:108CD000241E00018D4800148E0300840103B02B74
-:108CE00016C00002010030218E0600848E0500644B
-:108CF00000C5382B14E0000200C020218E0400645F
-:108D00000080B0218D4200148E0B0064004B302B8C
-:108D100014C00002004020218E0400640096B82395
-:108D200056E00001241E0002025E202B1480014840
-:108D3000000018218D5900388E2F000C3C1800803F
-:108D4000AE3900008D5000343C0EFF9F01F86025C5
-:108D5000AE3000049149003F35CDFFFF018D202446
-:108D60003C0A00203C0BFFEFA229000B008A3825AB
-:108D70003562FFFF00E228243C0600088F8700B818
-:108D800000A6C825AE39000C8CE30014AE200018F4
-:108D90003C08FFFBAE2300148CF80018351FFFFFC2
-:108DA000033F7024AE38001C8CEF000802D78021EE
-:108DB000AE2F00248CED000CAE30002CAE2E000C3B
-:108DC000AE2D0020AE200028A6200038A620003AB4
-:108DD0008CEC0014019648230137502311400011F8
-:108DE000AE2A001090EE003D8E2C00048E24000070
-:108DF000000E6900018D28210000502100AD302BAC
-:108E0000008A582101661021AE250004AE22000020
-:108E100090E3003DA223000A8F8800B8951F00064A
-:108E2000A63F00088F8B00AC2406000202C0202160
-:108E3000A16600009765003C8F9000AC30A2FFFF58
-:108E40000E000CF9AFA200208FA300200002438087
-:108E50008F8500B80103C8253C1F4200033FC02591
-:108E6000AE1800048F8400AC8CAF0038AC8F0018B3
-:108E70008CB00034AC90001CAC80000CAC800010B6
-:108E8000A4800014A4800016A4800020A4800022E6
-:108E9000AC80002490A7003FA487000212C00210FB
-:108EA000240D000152E0000290A2003D90A2003E7D
-:108EB000244A0001A08A00018F8400ACAC9600080F
-:108EC0008F8300D024070034906F00BC31EE000285
-:108ED00051C00001240700308F8200B88F9900BC78
-:108EE000906800BC905F00002410000432CF0003A3
-:108EF000A33F00008F9800B88F8C00BC020F702336
-:108F0000930D00012405C00031CA0003A18D0001AA
-:108F10008F9000BC8F8900B800F6382196040002BB
-:108F20009526001200EA38210085582430C33FFFFF
-:108F300001631025A6020002921F000231080004FE
-:108F400033F9003F37380040A218000212C0000277
-:108F50008F8500BC00E838218F8600D0ACA70004C4
-:108F6000241FFFBF8CC3007C2ECB0001240FFFDF2A
-:108F7000ACA3000890A8000D000B69403102007FEF
-:108F8000A0A2000D8F9000BC9219000D033FC024D9
-:108F9000A218000D8F8A00BC914E000D01CF6024F5
-:108FA000018D4825A149000D8F8600B88F8B00BC2C
-:108FB0008CC70020AD6700108CC50024AD6500147F
-:108FC0008CC40028AD6400188CC3002C0E000D1951
-:108FD000AD63001C2408000257C8009C8F9000D08D
-:108FE0008F8F00D08F8A00C002E0202191E800D04E
-:108FF00091EB00D091E700D0311000FF316E00FFFF
-:1090000000106940000E28C001A5182130E900FFBA
-:109010000363C8210009314000CAF82127220088D3
-:10902000AF8200ACAF9F00BCA33E00880E000CF9DD
-:109030008F9000AC8FB80020000263803C0F42008C
-:10904000019840258F8C00B8010F5825AE0B000405
-:109050008D8400388F8B00AC00002821000539007A
-:10906000AD6400188D8E00343C0F7FFF35E8FFFFA4
-:10907000AD6E001C9183003E8D69001C8D6600184A
-:109080000003510000036F02012AC02100ED1025EA
-:10909000030AF82B00C2C821033F8021AD78001CD1
-:1090A000AD700018AD60000CAD6000109184003E02
-:1090B000241F00052410C000A5640014958E000430
-:1090C00002E8402402E02021A56E00169185003EB2
-:1090D000A5650020958D0004A56D0022AD600024DB
-:1090E0009187003FA56700029183003E9189003D72
-:1090F0000123502325460001A16600018F8200ACA8
-:109100008F9900BCAC570008A33F00008F8A00BCB9
-:109110008F9800B8954F0002970E00122418FFBFD9
-:10912000020F682431C53FFF01A53825A54700027D
-:10913000914C00022405FFDF3189003F35230040B8
-:10914000A14300028F9900BC8F8600D02409FFFF45
-:10915000AF2000048CCB007C2403FF80AF2B0008E1
-:109160009322000D3C0B8000305F007FA33F000D79
-:109170008F8E00BC91D0000D02187824A1CF000D75
-:109180008F8C00BC918D000D01A53824A187000DA6
-:109190008F8600BCACC90010ACD6001490CA001871
-:1091A0000143B025A0D600188F8F00BC8F9800B85F
-:1091B0008DE20018004BF82403E8C825ADF900182B
-:1091C0009310003EA1F0001C8F8E00B88F8D00BC64
-:1091D0008F8700D095C50004A5A5001E0E00020DC6
-:1091E0008CE500848F8700D00002614000022100DE
-:1091F00090EA00BC01844821004028213156000239
-:1092000012C0000302E930210002B08000D63021F4
-:1092100090EC00BC318400041080000332EA0003AB
-:109220000005C08000D83021240900048F9700BCBD
-:10923000012A1023305F000300DFC821AEF90004CB
-:109240000E000D19A62500388F9000D003C01821FC
-:10925000146000020060B0210000902156C000861A
-:109260008F9700B80012882B9609001002955023A2
-:109270003C14002002A91021A6020010AF540030B7
-:109280003154FFFF0000000096130010961F0012DB
-:1092900013F30011000000008E17000C8E0C000864
-:1092A0000015C98002F94021001927C30119B02B0C
-:1092B0000184782101F65821AE08000CAE0B00089D
-:1092C0000014A82B023580241200FE6B8F9000D072
-:1092D0000A000F4200000000960B00148E050004E7
-:1092E0003163FFFF000370C000AE3821AF47003C80
-:1092F0008E0600048F4D003C00CDF0231BC00036CD
-:10930000000000008E080000250200013C1600103D
-:1093100036CF0008AF420038AF4F003000000000E9
-:10932000000000000000000000000000000000003D
-:109330000000000000000000000000008F4400005A
-:10934000308C00201180FFFD000000008F590400C8
-:109350003C170020AE1900088F550404AE15000C10
-:10936000AF570030000000003C0608008CC60044E7
-:109370002418000110D800D3000000009607001246
-:109380003C0508008CA5004000A76821A60D00122E
-:10939000961E001427C90001A609001496020014A5
-:1093A0003044FFFF5486FFC70014A82B30A5FFFFF1
-:1093B0000E000F1DA60000143C0308008C6300245F
-:1093C000960500120043702300AE3023A60600125B
-:1093D0000A0011480014A82B8E0200000A00115B3D
-:1093E0003C1600109156000124100001001678422E
-:1093F00015F0001C97A8001E8D5F00142411C000FA
-:1094000033FE3FFF0111C8243C1808008F1800608C
-:10941000033EB82532E53FFF00B8502B1140001144
-:10942000A7B7001E3C1008008E1000588F8F00B0A8
-:1094300000057180240CFF80020F682101AE4821D5
-:109440003124007F012C5824009A28213C02000E70
-:10945000AF4B002C00A2302190C7000D34E3000474
-:10946000A0C3000D0E000D3B000000008F9000D047
-:10947000240300018F9700B826B900010019AC0041
-:10948000024390230015AC0326F8004002B3202AC3
-:109490000012882B240C000103005021009110249D
-:1094A000AF9800B80A000F70AFAC001095560012CC
-:1094B0008F8400B032C5FFFF0E000CEEA7B600147B
-:1094C0008F9000D00A0011B4000018218D59003887
-:1094D000A620000824040003AE3900008D57003494
-:1094E000A220000A8F9800B8AE3700043C0F00801D
-:1094F000930C003FA224000C8E28000C3C0BFF9F15
-:10950000A22C000B010F1825356EFFFF3C05FFEF65
-:109510008F9700B8006E682434A7FFFF01A730249E
-:10952000AE26000C8EFE001496FF00128F8200B053
-:10953000AE3E00108EF00014AE200018AE200020C9
-:10954000AE300014AE2000248EE9001833F03FFF47
-:1095500000105180AE2900288EF900080142C02178
-:1095600033EC0001AE3900308EEB000C8F8500AC7F
-:10957000001879C2000C238001E44021240E00026F
-:10958000A628001CA6200036AE2B002CA0AE0000A2
-:109590009767003C8F8A00AC3C03420030EDFFFF30
-:1095A00001A33025AD4600048F9E00B824020001BF
-:1095B0002408C0008FD1003824060034AD510018B3
-:1095C0008FC90034AD49001CAD40000CAD40001007
-:1095D000A5400014A5400016A5400020A54000228B
-:1095E000AD400024A5560002A14200018F9F00ACAF
-:1095F0008F9900B88F9800BCAFF600089337000031
-:10960000A31700008F8C00B88F8F00BC91840001DD
-:10961000A1E400018F8D00BC95AB000201687024AD
-:1096200001D02825A5A5000291A7000230E3003F44
-:10963000A1A300028F8300D08F8400BC907100BC76
-:10964000323E000253C0000124060030AC86000404
-:109650008C6F007C2403FFBFAC8F00089088000D46
-:10966000310B007FA08B000D8F8700BC90EE000DAA
-:1096700001C32824A0E5000D8F9E00BC93CD000DF2
-:1096800035A60020A3C6000D8F8A00B88F9100BCBC
-:109690008D500020AE3000108D490024AE290014FA
-:1096A0008D420028AE2200188D5F002CAE3F001CBA
-:1096B0000E000D19000000008F9000D00A00112E3E
-:1096C00002C01821960A00123C1F08008FFF0024D8
-:1096D00003EA9821A61300120A0011480014A82BCF
-:1096E000A08D00018F8900AC240C0001AD2C000876
-:1096F0000A0010488F8300D027BDFFE03C18080007
-:109700008F180050AFB00010AFBF0018AFB10014F9
-:10971000AF8400B093710074030478212410FF809B
-:1097200031EE007F3225007F01F0582401DA6821F4
-:109730003C0C000AA38500C401AC2821AF4B0024D7
-:1097400094A900109768000690A600620080382156
-:10975000240200300109202330C300F0AF8500D07F
-:10976000106200193090FFFF90AE0062240DFFF0F0
-:10977000240A005001AE6024318B00FF116A002FD3
-:109780000000000016000007241F0C00AF5F00243B
-:109790008FB100148FBF00188FB0001003E00008D5
-:1097A00027BD00200E000F2302002021241F0C00E3
-:1097B000AF5F00248FB100148FBF00188FB000106E
-:1097C00003E0000827BD002094A200E094A400E27A
-:1097D00090BF0113008218263079FFFF33E700C0E5
-:1097E00014E000092F3100011600003800000000CD
-:1097F0005620FFE6241F0C000E000DDE00000000C6
-:109800000A00127A241F0C001620FFDE0000000060
-:109810000E000DDE000000001440FFDC241F0C00D1
-:10982000160000228F8300D0906901133122003F7F
-:10983000A06201130A00127A241F0C0094AF00D416
-:109840008F8600D400E02821240400050E000C7F40
-:1098500031F0FFFF1440000524030003979100E658
-:10986000000018212625FFFFA78500E68F5801B8C4
-:109870000700FFFE3C196013AF400180241F0C005D
-:10988000AF500184007938253C101000AF470188A3
-:109890008FB10014AF5001B8AF5F00248FB000103B
-:1098A0008FBF001803E0000827BD00200E000F2323
-:1098B000020020215040FFB5241F0C008F8300D0F0
-:1098C000906901130A0012A33122003F0E000F23FA
-:1098D000020020211440FFAD241F0C0012200007BD
-:1098E0008F8300D0906801133106003F34C20040DE
-:1098F000A06201130A00127A241F0C000E000DDE74
-:10990000000000005040FFA1241F0C008F8300D0F6
-:10991000906801133106003F0A0012D334C20040A0
-:10992000AF9B00C803E00008AF8000EC3089FFFF68
-:10993000000940422D020041000929801440000224
-:109940000009504024080040000879400008C0C0C9
-:1099500001F85821256701A800EF702125CC007F70
-:10996000240DFF80018D18240065302100CA2821B4
-:1099700025640088240A00883C010800AC2A004CB9
-:109980003C010800AC240050AF8500D43C01080025
-:10999000AC2900603C010800AC2800643C010800D0
-:1099A000AC2700543C010800AC2300583C010800DF
-:1099B000AC26005C03E0000800000000308300FFDC
-:1099C00030C6FFFF30E400FF8F4201B80440FFFEC5
-:1099D00000034C00012438253C08600000E82025E5
-:1099E0003C031000AF450180AF460184AF440188BD
-:1099F00003E00008AF4301B88F86001C3C096012E9
-:109A0000352700108CCB00043C0C600E358500100F
-:109A1000316A00062D480001ACE800C48CC4000483
-:109A2000ACA431808CC2000894C30002ACA2318483
-:109A300003E00008A78300E43C0308008C630050A7
-:109A40008F8400E88F86001C2402FF800064C02100
-:109A50000302C824AF5900288CCD00043305007FD1
-:109A600000BA78213C0E000C01EE2821ACAD005864
-:109A70008CC80008AF8500D03C076012ACA8005C21
-:109A80008CCC001034E80010ACAC000C8CCB000C7B
-:109A9000ACAB000894AA00143C0208008C420044BD
-:109AA00025490001A4A9001494A400143083FFFFE9
-:109AB000106200178F8400D03C0A08008D4A0040D5
-:109AC000A4AA00128CCE0018AC8E00248CCD0014F9
-:109AD000AC8D00208CC70018AC87002C8CCC0014F7
-:109AE00024060001AC8C00288D0B00BC5166001AC6
-:109AF0008D0200B48D0200B8A482003A948F003A1F
-:109B0000A48F003C948800D403E000083102FFFFDA
-:109B10003C0908008D290024A4A000148F8400D0E3
-:109B2000A4A900128CCE0018AC8E00248CCD001499
-:109B3000AC8D00208CC70018AC87002C8CCC001496
-:109B400024060001AC8C00288D0B00BC5566FFEA92
-:109B50008D0200B88D0200B4A482003A948F003ABE
-:109B6000A48F003C948800D403E000083102FFFF7A
-:109B70008F86001C3C0C08008D8C0050240BFF804D
-:109B80008CCD00083C03000C000D51C0018A40211F
-:109B9000010B4824AF8A00E8AF49002890C70007AE
-:109BA0003105007F00BA10210043282130E4000471
-:109BB0001080002FAF8500D090CF000731EE000855
-:109BC00011C0003C000000008CD9000C8CC40014B3
-:109BD0000324C02B13000026000000008CC2000CE0
-:109BE000ACA200648CCD00182402FFF8ACAD006874
-:109BF0008CCC0010ACAC00808CCB000CACAB0084E7
-:109C00008CCA001CACAA007C90A900BC0122402494
-:109C1000A0A800BC90C300073067000810E0000453
-:109C20008F8500D090AF00BC35EE0001A0AE00BC27
-:109C300090D90007333800011300000F8F8400D043
-:109C400024070020908200BC34490002A08900BC97
-:109C50008F8400D090880062310300F01467000602
-:109C6000240A0034AC8A00C00A0013B500000000CA
-:109C70000A00138F8CC2001490CB000731660002DB
-:109C800010C0000500000000908D00BC35AC000441
-:109C9000A08C00BC8F8400D090980113330F003F3C
-:109CA000A08F01138F8E00D095C500D403E000086B
-:109CB00030A2FFFFACA000640A0013900000000077
-:109CC00027BDFFD8AFB000108F90001CAFBF00249D
-:109CD000AFB40020AFB20018AFB10014AFB3001C96
-:109CE0009613000E3C07600A3C1460063264FFFFC6
-:109CF000369300100E0012E234F404108F8400D466
-:109D00003C11600E0E0009BE36310010920E001597
-:109D10003C0708008CE700603C12601231CD000F58
-:109D2000A38D00F08E0E00048E0D00089608001220
-:109D3000961F00109619001A9618001E960F001C08
-:109D4000310CFFFF33EBFFFF332AFFFF3309FFFF27
-:109D500031E6FFFF3C010800AC2B00403C0108004D
-:109D6000AC2C00243C010800AC2A0044AE29317818
-:109D7000AE26317C92020015960300163652001072
-:109D8000304400FF3065FFFF3C0608008CC60064CD
-:109D9000AE243188AE4500B492080014961900181C
-:109DA000241F0001011FC004332FFFFF3C050800E2
-:109DB0008CA50058AE5800B8AE4F00BC920C0014F1
-:109DC000AF8E00D8AF8D00DC318B00FFAE4B00C0F2
-:109DD000920A0015AE670048AE66004C314900FF9C
-:109DE000AE4900C8AE65007C3C0308008C6300509F
-:109DF0003C0408008C84004C3C0808008D0800548A
-:109E00003C0208008C42005C8FBF0024AE630080DF
-:109E10008FB00010AE8300748FB3001CAE22319C53
-:109E2000AE4200DCAE2731A0AE2631A4AE24318C88
-:109E3000AE233190AE283194AE253198AE870050D4
-:109E4000AE860054AE8500708FB10014AE4700E0BE
-:109E5000AE4600E4AE4400CCAE4300D0AE4800D4E1
-:109E6000AE4500D88FB400208FB2001803E0000880
-:109E700027BD002827BDFFE0AFB10014AFBF001819
-:109E8000241100010E000868AFB000101051000549
-:109E9000978400E6978300CC0083102B14400008C1
-:109EA0008F8500D4240700028FBF00188FB10014E3
-:109EB0008FB0001000E0102103E0000827BD002053
-:109EC0000E000C9D24040005AF8200E81040FFF650
-:109ED000240700020E00086C8F90001C979F00E67C
-:109EE0008F9900E88F8D00C827EF0001240E0050E5
-:109EF000AF590020A78F00E6A1AE00003C0C08007F
-:109F00008D8C00648F8600C8240A8000000C5E00DF
-:109F1000ACCB0074A4C0000694C9000A241FFF80C3
-:109F20003C0D000C012AC024A4D8000A90C8000AE5
-:109F300024182000011F1825A0C3000A8F8700C81D
-:109F4000A0E000788F8500C800003821A0A0008321
-:109F50003C0208008C4200508F8400E800447821C5
-:109F600001FFC824AF590028960B000231EE007F94
-:109F700001DA6021018D3021A4CB00D4960A0002C1
-:109F8000AF8600D03C0E000425492401A4C900E698
-:109F90008E080004ACC800048E030008ACC30000A7
-:109FA000A4C00010A4C00014A0C000D08F8500D0B1
-:109FB0002403FFBFA0A000D13C0408008C840064EF
-:109FC0008F8200D0A04400D28E1F000C8F8A00D058
-:109FD000978F00E4AD5F001C8E1900102410003034
-:109FE000AD590018A5400030A5510054A5510056A8
-:109FF000A54F0016AD4E0068AD580080AD580084E6
-:10A00000914D006231AC000F358B0010A14B006206
-:10A010008F8600D090C900633128007FA0C80063FC
-:10A020008F8400D02406FFFF9085006300A31024D6
-:10A03000A08200638F9100D000E01021923F00BC0D
-:10A0400037F90001A23900BC8F8A00D0938F00F04D
-:10A05000AD580064AD5000C0914E00D3000F6900B0
-:10A0600031CC000F018D5825A14B00D38F8500D036
-:10A070008F8900DCACA900E88F8800D88FBF00185A
-:10A080008FB100148FB0001027BD0020ACA800ECE9
-:10A09000A4A600D6A4A000E0A4A000E203E000086B
-:10A0A0000000000027BDFFE0AFB000108F90001C43
-:10A0B000AFB10014AFBF00188E1900043C1808009F
-:10A0C0008F180050240FFF80001989C002387021BA
-:10A0D00031CD007F01CF602401BA50213C0B000C30
-:10A0E000AF4C0028014B4021950900D4950400D6BF
-:10A0F0008E0700043131FFFFAF8800D00E00093613
-:10A10000000721C08E0600048F8300C8000629C006
-:10A11000AF4500209064003E3082004014400006AD
-:10A120008F8400D0341FFFFF948300D63062FFFF7E
-:10A13000145F000400000000948400D60E0008CBD9
-:10A140003084FFFF8E050004022030218FBF0018ED
-:10A150008FB100148FB000102404002200003821B9
-:10A16000000529C00A00130627BD002027BDFFE017
-:10A17000AFB100143091FFFFAFB00010AFBF0018B7
-:10A180001220001D000080218F86001C8CC500005D
-:10A190002403000600053F020005140230E4000716
-:10A1A00014830015304500FF2CA800061100004D57
-:10A1B000000558803C0C0800258C5A0C016C50217D
-:10A1C0008D49000001200008000000008F8E00EC87
-:10A1D000240D000111CD005900000000260B0001E4
-:10A1E0003170FFFF24CA00200211202B01403021D2
-:10A1F0001480FFE6AF8A001C020010218FBF0018F8
-:10A200008FB100148FB0001003E0000827BD0020BC
-:10A21000938700CE14E00038240400140E0013C706
-:10A22000000000008F86001C240200010A00150EA9
-:10A23000AF8200EC8F8900EC240800021128003B5B
-:10A24000240400130000282100003021240700010D
-:10A250000E001306000000000A00150E8F86001C79
-:10A260008F8700EC2405000214E5FFF62404001299
-:10A270000E001373000000008F8500E800403021BD
-:10A28000240400120E001306000038210A00150EE7
-:10A290008F86001C8F8300EC241F0003147FFFD0E7
-:10A2A000260B00010E001325000000008F8500E83A
-:10A2B0000040302124020002240400100000382154
-:10A2C000AF8200EC0E001306000000000A00150E1D
-:10A2D0008F86001C8F8F00EC2406000211E6000B15
-:10A2E000000000002404001000002821000030219C
-:10A2F0000A00152B24070001000028210E00130678
-:10A30000000030210A00150E8F86001C0E00143448
-:10A3100000000000144000128F99001C8F86001C62
-:10A32000240200030A00150EAF8200EC0E0014C0D8
-:10A33000000000000A00150E8F86001C0E00131589
-:10A340000000000024020002240400140000282160
-:10A3500000003021000038210A001548AF8200ECCF
-:10A360000040382124040010973800020000282102
-:10A370000E0013063306FFFF0A00150E8F86001C21
-:10A380008F8400C83C077FFF34E6FFFF8C85007494
-:10A390002402000100A61824AC83007403E0000826
-:10A3A000A082000510A000362CA20080274A0400DD
-:10A3B0003C0B0005240900801040000724080080A1
-:10A3C00030A6000F00C540212D030081146000025B
-:10A3D00000A0482124080080AF4B0030000000009E
-:10A3E00000000000000000001100000900003821FA
-:10A3F000014030218C8D000024E7000400E8602B30
-:10A40000ACCD0000248400041580FFFA24C60004AB
-:10A410000000000000000000000000003C0E0006EC
-:10A42000010E3825AF47003000000000000000009A
-:10A43000000000008F4F000031E800101100FFFD08
-:10A44000000000008F42003C8F43003C0049C821BF
-:10A450000323C02B13000004000000008F4C0038C1
-:10A4600025860001AF4600388F47003C00A928230D
-:10A4700000E96821AF4D003C14A0FFCE2CA2008063
-:10A4800003E000080000000027BDFFD03C020002EE
-:10A49000AFB100143C11000CAF450038AFB3001C45
-:10A4A000AF46003C00809821AF4200302405008870
-:10A4B000AF44002803512021AFBF0028AFB50024CE
-:10A4C000AFB40020AFB200180E001580AFB000107E
-:10A4D0003C1F08008FFF004C3C1808008F180064D8
-:10A4E0002410FF8003F3A82132B9007F02B0782442
-:10A4F0000018A0C0033A70210018914001D120211A
-:10A50000AF4F00280E001580025428213C0D080092
-:10A510008DAD00502405012001B35821316C007F1E
-:10A5200001705024019A4821013120210E0015802C
-:10A53000AF4A00283C0808008D0800543C0508007C
-:10A540008CA500640113382130E6007F00F0182448
-:10A5500000DA202100912021AF4300280E00158051
-:10A56000000529403C0208008C4200583C100800BD
-:10A570008E1000601200001C005388212415FF80FB
-:10A580000A0016033C14000C3226007F0235182402
-:10A5900000DA202102402821AF4300280094202126
-:10A5A0000E0015802610FFC01200000F0232882115
-:10A5B0002E05004110A0FFF4241210003226007F67
-:10A5C000001091800235182400DA20210240282151
-:10A5D000AF430028009420210E0015800000802148
-:10A5E0001600FFF3023288213C0B08008D6B005CE3
-:10A5F000240AFF802405000201734021010A482437
-:10A60000AF4900283C040800948400623110007FA8
-:10A61000021A88213C07000C0E000CCD022798215D
-:10A6200000402821026020218FBF00288FB5002420
-:10A630008FB400208FB3001C8FB200188FB10014AC
-:10A640008FB000100A00158027BD00308F83001CDA
-:10A650008C620004104000030000000003E00008CA
-:10A66000000000008C6400108C6500080A0015B919
-:04A670008C66000CE8
-:0CA67400000000000000001B0000000FB0
-:10A680000000000A000000080000000600000005AD
-:10A6900000000005000000040000000400000003AA
-:10A6A000000000030000000300000003000000039E
-:10A6B0000000000200000002000000020000000292
-:10A6C0000000000200000002000000020000000282
-:10A6D0000000000200000002000000020000000272
-:10A6E0000000000200000002000000020000000163
-:08A6F000000000010000000160
-:08A6F80008000F5808000DB026
-:10A7000008000FEC0800109408000F8008000FC02C
-:10A71000080011CC08000DCC080011F008000E1C38
-:10A7200008001630080015D808000DCC08000DCC24
-:10A7300008000DCC0800127C0800127C08000DCC2B
-:10A7400008000DCC0800157C08000DCC08000DCCCD
-:10A7500008000DCC08000DCC080013EC08000DCC4F
-:10A7600008000DCC08000DCC08000DCC08000DCC65
-:10A7700008000DCC08000DCC08000DCC08000DCC55
-:10A7800008000DCC08000DCC08000DCC08000DCC45
-:10A7900008000DCC08000FE008000DCC08000DCC1F
-:10A7A0000800152C08000DCC08000DCC08000DCCBD
-:10A7B00008000DCC08000DCC08000DCC08000DCC15
-:10A7C00008000DCC08000DCC08000DCC08000DCC05
-:10A7D00008000DCC08000DCC08000DCC08000DCCF5
-:10A7E00008000DCC08000DCC0800145808000DCC52
-:10A7F00008000DCC08001370080012E008002EA01D
-:10A8000008002EA808002E7008002E7C08002E8854
-:10A8100008002E94080046C008003F0C080046407F
-:10A82000080046C0080046C0080044C0080046C0F2
-:10A830000800470808005530080054F0080054BCD0
-:0CA84000080054900800546C08005428D4
-:04A84C000A000C767C
-:10A8500000000000000000000000000D727870355C
-:10A860002E302E306A330000050000030000000087
-:10A8700000000001000000000000000000000000D7
-:10A8800000000000000000000000000000000000C8
-:10A8900000000000000000000000000000000000B8
-:10A8A00000000000000000000000000000000000A8
-:10A8B0000000000000000000000000000000000098
-:10A8C0000000000000000000000000000000000088
-:10A8D0000000000000000000000000000000000078
-:10A8E0000000000000000000000000000000000068
-:10A8F0000000000000000000000000000000000058
-:10A900000000000000000000000000000000000047
-:10A910000000000000000000000000000000000037
-:10A920000000000000000000000000000000000027
-:10A930000000000000000000000000000000000017
-:10A940000000000000000000000000000000000007
-:10A9500000000000000000000000000000000000F7
-:10A9600000000000000000000000000000000000E7
-:10A9700000000000000000000000000000000000D7
-:10A9800000000000000000000000000000000000C7
-:10A9900000000000000000000000000000000000B7
-:10A9A00000000000000000000000000000000000A7
-:10A9B0000000000000000000000000000000000097
-:10A9C0000000000000000000000000000000000087
-:10A9D0000000000000000000000000000000000077
-:10A9E0000000000000000000000000000000000067
-:10A9F0000000000000000000000000000000000057
-:10AA00000000000000000000000000000000000046
-:10AA10000000000000000000000000000000000036
-:10AA20000000000000000000000000000000000026
-:10AA30000000000000000000000000000000000016
-:10AA40000000000000000000000000000000000006
-:10AA500000000000000000000000000000000000F6
-:10AA600000000000000000000000000000000000E6
-:10AA700000000000000000000000000000000000D6
-:10AA800000000000000000000000000000000000C6
-:10AA900000000000000000000000000000000000B6
-:10AAA00000000000000000000000000000000000A6
-:10AAB0000000000000000000000000000000000096
-:10AAC0000000000000000000000000000000000086
-:10AAD0000000000000000000000000000000000076
-:10AAE0000000000000000000000000000000000066
-:10AAF0000000000000000000000000000000000056
-:10AB00000000000000000000000000000000000045
-:10AB10000000000000000000000000000000000035
-:10AB20000000000000000000000000000000000025
-:10AB30000000000000000000000000000000000015
-:10AB40000000000000000000000000000000000005
-:10AB500000000000000000000000000000000000F5
-:10AB600000000000000000000000000000000000E5
-:10AB700000000000000000000000000000000000D5
-:10AB800000000000000000000000000000000000C5
-:10AB900000000000000000000000000000000000B5
-:10ABA00000000000000000000000000000000000A5
-:10ABB0000000000000000000000000000000000095
-:10ABC0000000000000000000000000000000000085
-:10ABD0000000000000000000000000000000000075
-:10ABE0000000000000000000000000000000000065
-:10ABF0000000000000000000000000000000000055
-:10AC00000000000000000000000000000000000044
-:10AC10000000000000000000000000000000000034
-:10AC20000000000000000000000000000000000024
-:10AC30000000000000000000000000000000000014
-:10AC40000000000000000000000000000000000004
-:10AC500000000000000000000000000000000000F4
-:10AC600000000000000000000000000000000000E4
-:10AC700000000000000000000000000000000000D4
-:10AC800000000000000000000000000000000000C4
-:10AC900000000000000000000000000000000000B4
-:10ACA00000000000000000000000000000000000A4
-:10ACB0000000000000000000000000000000000094
-:10ACC0000000000000000000000000000000000084
-:10ACD0000000000000000000000000000000000074
-:10ACE0000000000000000000000000000000000064
-:10ACF0000000000000000000000000000000000054
-:10AD00000000000000000000000000000000000043
-:10AD10000000000000000000000000000000000033
-:10AD20000000000000000000000000000000000023
-:10AD30000000000000000000000000000000000013
-:10AD40000000000000000000000000000000000003
-:10AD500000000000000000000000000000000000F3
-:10AD600000000000000000000000000000000000E3
-:10AD700000000000000000000000000000000000D3
-:10AD800000000000000000000000000000000000C3
-:10AD900000000000000000000000000000000000B3
-:10ADA00000000000000000000000000000000000A3
-:10ADB0000000000000000000000000000000000093
-:10ADC0000000000000000000000000000000000083
-:10ADD0000000000000000000000000000000000073
-:10ADE0000000000000000000000000000000000063
-:10ADF0000000000000000000000000000000000053
-:10AE00000000000000000000000000000000000042
-:10AE10000000000000000000000000000000000032
-:10AE20000000000000000000000000000000000022
-:10AE30000000000000000000000000000000000012
-:10AE40000000000000000000000000000000000002
-:10AE500000000000000000000000000000000000F2
-:10AE600000000000000000000000000000000000E2
-:10AE700000000000000000000000000000000000D2
-:10AE800000000000000000000000000000000000C2
-:10AE900000000000000000000000000000000000B2
-:10AEA00000000000000000000000000000000000A2
-:10AEB0000000000000000000000000000000000092
-:10AEC0000000000000000000000000000000000082
-:10AED0000000000000000000000000000000000072
-:10AEE0000000000000000000000000000000000062
-:10AEF0000000000000000000000000000000000052
-:10AF00000000000000000000000000000000000041
-:10AF10000000000000000000000000000000000031
-:10AF20000000000000000000000000000000000021
-:10AF30000000000000000000000000000000000011
-:10AF40000000000000000000000000000000000001
-:10AF500000000000000000000000000000000000F1
-:10AF600000000000000000000000000000000000E1
-:10AF700000000000000000000000000000000000D1
-:10AF800000000000000000000000000000000000C1
-:10AF900000000000000000000000000000000000B1
-:10AFA00000000000000000000000000000000000A1
-:10AFB0000000000000000000000000000000000091
-:10AFC0000000000000000000000000000000000081
-:10AFD0000000000000000000000000000000000071
-:10AFE0000000000000000000000000000000000061
-:10AFF0000000000000000000000000000000000051
-:10B000000000000000000000000000000000000040
-:10B010000000000000000000000000000000000030
-:10B020000000000000000000000000000000000020
-:10B030000000000000000000000000000000000010
-:10B040000000000000000000000000000000000000
-:10B0500000000000000000000000000000000000F0
-:10B0600000000000000000000000000000000000E0
-:10B0700000000000000000000000000000000000D0
-:10B0800000000000000000000000000000000000C0
-:10B0900000000000000000000000000000000000B0
-:10B0A00000000000000000000000000000000000A0
-:10B0B0000000000000000000000000000000000090
-:10B0C0000000000000000000000000000000000080
-:10B0D0000000000000000000000000000000000070
-:10B0E0000000000000000000000000000000000060
-:10B0F0000000000000000000000000000000000050
-:10B10000000000000000000000000000000000003F
-:10B11000000000000000000000000000000000002F
-:10B12000000000000000000000000000000000001F
-:10B13000000000000000000000000000000000000F
-:10B1400000000000000000000000000000000000FF
-:10B1500000000000000000000000000000000000EF
-:10B1600000000000000000000000000000000000DF
-:10B1700000000000000000000000000000000000CF
-:10B1800000000000000000000000000000000000BF
-:10B1900000000000000000000000000000000000AF
-:10B1A000000000000000000000000000000000009F
-:10B1B000000000000000000000000000000000008F
-:10B1C000000000000000000000000000000000007F
-:10B1D000000000000000000000000000000000006F
-:10B1E000000000000000000000000000000000005F
-:10B1F000000000000000000000000000000000004F
-:10B20000000000000000000000000000000000003E
-:10B21000000000000000000000000000000000002E
-:10B22000000000000000000000000000000000001E
-:10B23000000000000000000000000000000000000E
-:10B2400000000000000000000000000000000000FE
-:10B2500000000000000000000000000000000000EE
-:10B2600000000000000000000000000000000000DE
-:10B2700000000000000000000000000000000000CE
-:10B2800000000000000000000000000000000000BE
-:10B2900000000000000000000000000000000000AE
-:10B2A000000000000000000000000000000000009E
-:10B2B000000000000000000000000000000000008E
-:10B2C000000000000000000000000000000000007E
-:10B2D000000000000000000000000000000000006E
-:10B2E000000000000000000000000000000000005E
-:10B2F000000000000000000000000000000000004E
-:10B30000000000000000000000000000000000003D
-:10B31000000000000000000000000000000000002D
-:10B32000000000000000000000000000000000001D
-:10B33000000000000000000000000000000000000D
-:10B3400000000000000000000000000000000000FD
-:10B3500000000000000000000000000000000000ED
-:10B3600000000000000000000000000000000000DD
-:10B3700000000000000000000000000000000000CD
-:10B3800000000000000000000000000000000000BD
-:10B3900000000000000000000000000000000000AD
-:10B3A000000000000000000000000000000000009D
-:10B3B000000000000000000000000000000000008D
-:10B3C000000000000000000000000000000000007D
-:10B3D000000000000000000000000000000000006D
-:10B3E000000000000000000000000000000000005D
-:10B3F000000000000000000000000000000000004D
-:10B40000000000000000000000000000000000003C
-:10B41000000000000000000000000000000000002C
-:10B42000000000000000000000000000000000001C
-:10B43000000000000000000000000000000000000C
-:10B4400000000000000000000000000000000000FC
-:10B4500000000000000000000000000000000000EC
-:10B4600000000000000000000000000000000000DC
-:10B4700000000000000000000000000000000000CC
-:10B4800000000000000000000000000000000000BC
-:10B4900000000000000000000000000000000000AC
-:10B4A000000000000000000000000000000000009C
-:10B4B000000000000000000000000000000000008C
-:10B4C000000000000000000000000000000000007C
-:10B4D000000000000000000000000000000000006C
-:10B4E000000000000000000000000000000000005C
-:10B4F000000000000000000000000000000000004C
-:10B50000000000000000000000000000000000003B
-:10B51000000000000000000000000000000000002B
-:10B52000000000000000000000000000000000001B
-:10B53000000000000000000000000000000000000B
-:10B5400000000000000000000000000000000000FB
-:10B5500000000000000000000000000000000000EB
-:10B5600000000000000000000000000000000000DB
-:10B5700000000000000000000000000000000000CB
-:10B5800000000000000000000000000000000000BB
-:10B5900000000000000000000000000000000000AB
-:10B5A000000000000000000000000000000000009B
-:10B5B000000000000000000000000000000000008B
-:10B5C000000000000000000000000000000000007B
-:10B5D000000000000000000000000000000000006B
-:10B5E000000000000000000000000000000000005B
-:10B5F000000000000000000000000000000000004B
-:10B60000000000000000000000000000000000003A
-:10B61000000000000000000000000000000000002A
-:10B62000000000000000000000000000000000001A
-:10B63000000000000000000000000000000000000A
-:10B6400000000000000000000000000000000000FA
-:10B6500000000000000000000000000000000000EA
-:10B6600000000000000000000000000000000000DA
-:10B6700000000000000000000000000000000000CA
-:10B6800000000000000000000000000000000000BA
-:10B6900000000000000000000000000000000000AA
-:10B6A000000000000000000000000000000000009A
-:10B6B000000000000000000000000000000000008A
-:10B6C000000000000000000000000000000000007A
-:10B6D000000000000000000000000000000000006A
-:10B6E000000000000000000000000000000000005A
-:10B6F000000000000000000000000000000000004A
-:10B700000000000000000000000000000000000039
-:10B710000000000000000000000000000000000029
-:10B720000000000000000000000000000000000019
-:10B730000000000000000000000000000000000009
-:10B7400000000000000000000000000000000000F9
-:10B7500000000000000000000000000000000000E9
-:10B7600000000000000000000000000000000000D9
-:10B7700000000000000000000000000000000000C9
-:10B7800000000000000000000000000000000000B9
-:10B7900000000000000000000000000000000000A9
-:10B7A0000000000000000000000000000000000099
-:10B7B0000000000000000000000000000000000089
-:10B7C0000000000000000000000000000000000079
-:10B7D0000000000000000000000000000000000069
-:10B7E0000000000000000000000000000000000059
-:10B7F0000000000000000000000000000000000049
-:10B800000000000000000000000000000000000038
-:10B810000000000000000000000000000000000028
-:10B820000000000000000000000000000000000018
-:10B830000000000000000000000000000000000008
-:10B8400000000000000000000000000000000000F8
-:10B8500000000000000000000000000000000000E8
-:10B8600000000000000000000000000000000000D8
-:10B8700000000000000000000000000000000000C8
-:10B8800000000000000000000000000000000000B8
-:10B8900000000000000000000000000000000000A8
-:10B8A0000000000000000000000000000000000098
-:10B8B0000000000000000000000000000000000088
-:10B8C0000000000000000000000000000000000078
-:10B8D0000000000000000000000000000000000068
-:10B8E0000000000000000000000000000000000058
-:10B8F0000000000000000000000000000000000048
-:10B900000000000000000000000000000000000037
-:10B910000000000000000000000000000000000027
-:10B920000000000000000000000000000000000017
-:10B930000000000000000000000000000000000007
-:10B9400000000000000000000000000000000000F7
-:10B9500000000000000000000000000000000000E7
-:10B9600000000000000000000000000000000000D7
-:10B9700000000000000000000000000000000000C7
-:10B9800000000000000000000000000000000000B7
-:10B9900000000000000000000000000000000000A7
-:10B9A0000000000000000000000000000000000097
-:10B9B0000000000000000000000000000000000087
-:10B9C0000000000000000000000000000000000077
-:10B9D0000000000000000000000000000000000067
-:10B9E0000000000000000000000000000000000057
-:10B9F0000000000000000000000000000000000047
-:10BA00000000000000000000000000000000000036
-:10BA10000000000000000000000000000000000026
-:10BA20000000000000000000000000000000000016
-:10BA30000000000000000000000000000000000006
-:10BA400000000000000000000000000000000000F6
-:10BA500000000000000000000000000000000000E6
-:10BA600000000000000000000000000000000000D6
-:10BA700000000000000000000000000000000000C6
-:10BA800000000000000000000000000000000000B6
-:10BA900000000000000000000000000000000000A6
-:10BAA0000000000000000000000000000000000096
-:10BAB0000000000000000000000000000000000086
-:10BAC0000000000000000000000000000000000076
-:10BAD0000000000000000000000000000000000066
-:10BAE0000000000000000000000000000000000056
-:10BAF0000000000000000000000000000000000046
-:10BB00000000000000000000000000000000000035
-:10BB10000000000000000000000000000000000025
-:10BB20000000000000000000000000000000000015
-:10BB30000000000000000000000000000000000005
-:10BB400000000000000000000000000000000000F5
-:10BB500000000000000000000000000000000000E5
-:10BB600000000000000000000000000000000000D5
-:10BB700000000000000000000000000000000000C5
-:10BB800000000000000000000000000000000000B5
-:10BB900000000000000000000000000000000000A5
-:10BBA0000000000000000000000000000000000095
-:10BBB0000000000000000000000000000000000085
-:10BBC0000000000000000000000000000000000075
-:10BBD0000000000000000000000000000000000065
-:10BBE0000000000000000000000000000000000055
-:10BBF0000000000000000000000000000000000045
-:10BC00000000000000000000000000000000000034
-:10BC10000000000000000000000000000000000024
-:10BC20000000000000000000000000000000000014
-:10BC30000000000000000000000000000000000004
-:10BC400000000000000000000000000000000000F4
-:10BC500000000000000000000000000000000000E4
-:10BC600000000000000000000000000000000000D4
-:10BC700000000000000000000000000000000000C4
-:10BC800000000000000000000000000000000000B4
-:10BC900000000000000000000000000000000000A4
-:10BCA0000000000000000000000000000000000094
-:10BCB0000000000000000000000000000000000084
-:10BCC0000000000000000000000000000000000074
-:10BCD0000000000000000000000000000000000064
-:10BCE0000000000000000000000000000000000054
-:10BCF0000000000000000000000000000000000044
-:10BD00000000000000000000000000000000000033
-:10BD10000000000000000000000000000000000023
-:10BD20000000000000000000000000000000000013
-:10BD30000000000000000000000000000000000003
-:10BD400000000000000000000000000000000000F3
-:10BD500000000000000000000000000000000000E3
-:10BD600000000000000000000000000000000000D3
-:10BD700000000000000000000000000000000000C3
-:10BD800000000000000000000000000000000000B3
-:10BD900000000000000000000000000000000000A3
-:10BDA0000000000000000000000000000000000093
-:10BDB0000000000000000000000000000000000083
-:10BDC0000000000000000000000000000000000073
-:10BDD0000000000000000000000000000000000063
-:10BDE0000000000000000000000000000000000053
-:10BDF0000000000000000000000000000000000043
-:10BE00000000000000000000000000000000000032
-:10BE10000000000000000000000000000000000022
-:10BE20000000000000000000000000000000000012
-:10BE30000000000000000000000000000000000002
-:10BE400000000000000000000000000000000000F2
-:10BE500000000000000000000000000000000000E2
-:10BE600000000000000000000000000000000000D2
-:10BE700000000000000000000000000000000000C2
-:10BE800000000000000000000000000000000000B2
-:10BE900000000000000000000000000000000000A2
-:10BEA0000000000000000000000000000000000092
-:10BEB0000000000000000000000000000000000082
-:10BEC0000000000000000000000000000000000072
-:10BED0000000000000000000000000000000000062
-:10BEE0000000000000000000000000000000000052
-:10BEF0000000000000000000000000000000000042
-:10BF00000000000000000000000000000000000031
-:10BF10000000000000000000000000000000000021
-:10BF20000000000000000000000000000000000011
-:10BF30000000000000000000000000000000000001
-:10BF400000000000000000000000000000000000F1
-:10BF500000000000000000000000000000000000E1
-:10BF600000000000000000000000000000000000D1
-:10BF700000000000000000000000000000000000C1
-:10BF800000000000000000000000000000000000B1
-:10BF900000000000000000000000000000000000A1
-:10BFA0000000000000000000000000000000000091
-:10BFB0000000000000000000000000000000000081
-:10BFC0000000000000000000000000000000000071
-:10BFD0000000000000000000000000000000000061
-:10BFE0000000000000000000000000000000000051
-:10BFF0000000000000000000000000000000000041
-:10C000000000000000000000000000000000000030
-:10C010000000000000000000000000000000000020
-:10C020000000000000000000000000000000000010
-:10C030000000000000000000000000000000000000
-:10C0400000000000000000000000000000000000F0
-:10C0500000000000000000000000000000000000E0
-:10C0600000000000000000000000000000000000D0
-:10C0700000000000000000000000000000000000C0
-:10C0800000000000000000000000000000000000B0
-:10C0900000000000000000000000000000000000A0
-:10C0A0000000000000000000000000000000000090
-:10C0B0000000000000000000000000000000000080
-:10C0C0000000000000000000000000000000000070
-:10C0D0000000000000000000000000000000000060
-:10C0E0000000000000000000000000000000000050
-:10C0F0000000000000000000000000000000000040
-:10C10000000000000000000000000000000000002F
-:10C11000000000000000000000000000000000001F
-:10C12000000000000000000000000000000000000F
-:10C1300000000000000000000000000000000000FF
-:10C1400000000000000000000000000000000000EF
-:10C1500000000000000000000000000000000000DF
-:10C1600000000000000000000000000000000000CF
-:10C1700000000000000000000000000000000000BF
-:10C1800000000000000000000000000000000000AF
-:10C19000000000000000000000000000000000009F
-:10C1A000000000000000000000000000000000008F
-:10C1B000000000000000000000000000000000007F
-:10C1C000000000000000000000000000000000006F
-:10C1D000000000000000000000000000000000005F
-:10C1E000000000000000000000000000000000004F
-:10C1F000000000000000000000000000000000003F
-:10C20000000000000000000000000000000000002E
-:10C21000000000000000000000000000000000001E
-:10C22000000000000000000000000000000000000E
-:10C2300000000000000000000000000000000000FE
-:10C2400000000000000000000000000000000000EE
-:10C2500000000000000000000000000000000000DE
-:10C2600000000000000000000000000000000000CE
-:10C2700000000000000000000000000000000000BE
-:10C2800000000000000000000000000000000000AE
-:10C29000000000000000000000000000000000009E
-:10C2A000000000000000000000000000000000008E
-:10C2B000000000000000000000000000000000007E
-:10C2C000000000000000000000000000000000006E
-:10C2D000000000000000000000000000000000005E
-:10C2E000000000000000000000000000000000004E
-:10C2F000000000000000000000000000000000003E
-:10C30000000000000000000000000000000000002D
-:10C31000000000000000000000000000000000001D
-:10C32000000000000000000000000000000000000D
-:10C3300000000000000000000000000000000000FD
-:10C3400000000000000000000000000000000000ED
-:10C3500000000000000000000000000000000000DD
-:10C3600000000000000000000000000000000000CD
-:10C3700000000000000000000000000000000000BD
-:10C3800000000000000000000000000000000000AD
-:10C39000000000000000000000000000000000009D
-:10C3A000000000000000000000000000000000008D
-:10C3B000000000000000000000000000000000007D
-:10C3C000000000000000000000000000000000006D
-:10C3D000000000000000000000000000000000005D
-:10C3E000000000000000000000000000000000004D
-:10C3F000000000000000000000000000000000003D
-:10C40000000000000000000000000000000000002C
-:10C41000000000000000000000000000000000001C
-:10C42000000000000000000000000000000000000C
-:10C4300000000000000000000000000000000000FC
-:10C4400000000000000000000000000000000000EC
-:10C4500000000000000000000000000000000000DC
-:10C4600000000000000000000000000000000000CC
-:10C4700000000000000000000000000000000000BC
-:10C4800000000000000000000000000000000000AC
-:10C49000000000000000000000000000000000009C
-:10C4A000000000000000000000000000000000008C
-:10C4B000000000000000000000000000000000007C
-:10C4C000000000000000000000000000000000006C
-:10C4D000000000000000000000000000000000005C
-:10C4E000000000000000000000000000000000004C
-:10C4F000000000000000000000000000000000003C
-:10C50000000000000000000000000000000000002B
-:10C51000000000000000000000000000000000001B
-:10C52000000000000000000000000000000000000B
-:10C5300000000000000000000000000000000000FB
-:10C5400000000000000000000000000000000000EB
-:10C5500000000000000000000000000000000000DB
-:10C5600000000000000000000000000000000000CB
-:10C5700000000000000000000000000000000000BB
-:10C5800000000000000000000000000000000000AB
-:10C59000000000000000000000000000000000009B
-:10C5A000000000000000000000000000000000008B
-:10C5B000000000000000000000000000000000007B
-:10C5C000000000000000000000000000000000006B
-:10C5D000000000000000000000000000000000005B
-:10C5E000000000000000000000000000000000004B
-:10C5F000000000000000000000000000000000003B
-:10C60000000000000000000000000000000000002A
-:10C61000000000000000000000000000000000001A
-:10C62000000000000000000000000000000000000A
-:10C6300000000000000000000000000000000000FA
-:10C6400000000000000000000000000000000000EA
-:10C6500000000000000000000000000000000000DA
-:10C6600000000000000000000000000000000000CA
-:10C6700000000000000000000000000000000000BA
-:10C6800000000000000000000000000000000000AA
-:10C69000000000000000000000000000000000009A
-:10C6A000000000000000000000000000000000008A
-:10C6B000000000000000000000000000000000007A
-:10C6C000000000000000000000000000000000006A
-:10C6D000000000000000000000000000000000005A
-:10C6E000000000000000000000000000000000004A
-:10C6F000000000000000000000000000000000003A
-:10C700000000000000000000000000000000000029
-:10C710000000000000000000000000000000000019
-:10C720000000000000000000000000000000000009
-:10C7300000000000000000000000000000000000F9
-:10C7400000000000000000000000000000000000E9
-:10C7500000000000000000000000000000000000D9
-:10C7600000000000000000000000000000000000C9
-:10C7700000000000000000000000000000000000B9
-:10C7800000000000000000000000000000000000A9
-:10C790000000000000000000000000000000000099
-:10C7A0000000000000000000000000000000000089
-:10C7B0000000000000000000000000000000000079
-:10C7C0000000000000000000000000000000000069
-:10C7D0000000000000000000000000000000000059
-:10C7E0000000000000000000000000000000000049
-:10C7F0000000000000000000000000000000000039
-:10C800000000000000000000000000000000000028
-:10C810000000000000000000000000000000000018
-:10C820000000000000000000000000000000000008
-:10C8300000000000000000000000000000000000F8
-:10C8400000000000000000000000000000000000E8
-:10C8500000000000000000000000000000000000D8
-:10C8600000000000000000000000000000000000C8
-:10C8700000000000000000000000000000000000B8
-:10C8800000000000000000000000000000000000A8
-:10C890000000000000000000000000000000000098
-:10C8A0000000000000000000000000000000000088
-:10C8B0000000000000000000000000000000000078
-:10C8C0000000000000000000000000000000000068
-:10C8D0000000000000000000000000000000000058
-:10C8E0000000000000000000000000000000000048
-:10C8F0000000000000000000000000000000000038
-:10C900000000000000000000000000000000000027
-:10C910000000000000000000000000000000000017
-:10C920000000000000000000000000000000000007
-:10C9300000000000000000000000000000000000F7
-:10C9400000000000000000000000000000000000E7
-:10C9500000000000000000000000000000000000D7
-:10C9600000000000000000000000000000000000C7
-:10C9700000000000000000000000000000000000B7
-:10C9800000000000000000000000000000000000A7
-:10C990000000000000000000000000000000000097
-:10C9A0000000000000000000000000000000000087
-:10C9B0000000000000000000000000000000000077
-:10C9C0000000000000000000000000000000000067
-:10C9D0000000000000000000000000000000000057
-:10C9E0000000000000000000000000000000000047
-:10C9F0000000000000000000000000000000000037
-:10CA00000000000000000000000000000000000026
-:10CA10000000000000000000000000000000000016
-:10CA20000000000000000000000000000000000006
-:10CA300000000000000000000000000000000000F6
-:10CA400000000000000000000000000000000000E6
-:10CA500000000000000000000000000000000000D6
-:10CA600000000000000000000000000000000000C6
-:10CA700000000000000000000000000000000000B6
-:10CA800000000000000000000000000000000000A6
-:10CA90000000000000000000000000000000000096
-:10CAA0000000000000000000000000000000000086
-:10CAB0000000000000000000000000000000000076
-:10CAC0000000000000000000000000000000000066
-:10CAD0000000000000000000000000000000000056
-:10CAE0000000000000000000000000000000000046
-:10CAF0000000000000000000000000000000000036
-:10CB00000000000000000000000000000000000025
-:10CB10000000000000000000000000000000000015
-:10CB20000000000000000000000000000000000005
-:10CB300000000000000000000000000000000000F5
-:10CB400000000000000000000000000000000000E5
-:10CB500000000000000000000000000000000000D5
-:10CB600000000000000000000000000000000000C5
-:10CB700000000000000000000000000000000000B5
-:10CB800000000000000000000000000000000000A5
-:10CB90000000000000000000000000000000000095
-:10CBA0000000000000000000000000000000000085
-:10CBB0000000000000000000000000000000000075
-:10CBC0000000000000000000000000000000000065
-:10CBD0000000000000000000000000000000000055
-:10CBE0000000000000000000000000000000000045
-:10CBF0000000000000000000000000000000000035
-:10CC00000000000000000000000000000000000024
-:10CC10000000000000000000000000000000000014
-:10CC20000000000000000000000000000000000004
-:10CC300000000000000000000000000000000000F4
-:10CC400000000000000000000000000000000000E4
-:10CC500000000000000000000000000000000000D4
-:10CC600000000000000000000000000000000000C4
-:10CC700000000000000000000000000000000000B4
-:10CC800000000000000000000000000000000000A4
-:10CC90000000000000000000000000000000000094
-:10CCA0000000000000000000000000000000000084
-:10CCB0000000000000000000000000000000000074
-:10CCC0000000000000000000000000000000000064
-:10CCD0000000000000000000000000000000000054
-:10CCE0000000000000000000000000000000000044
-:10CCF0000000000000000000000000000000000034
-:10CD00000000000000000000000000000000000023
-:10CD10000000000000000000000000000000000013
-:10CD20000000000000000000000000000000000003
-:10CD300000000000000000000000000000000000F3
-:10CD400000000000000000000000000000000000E3
-:10CD500000000000000000000000000000000000D3
-:10CD600000000000000000000000000000000000C3
-:10CD700000000000000000000000000000000000B3
-:10CD800000000000000000000000000000000000A3
-:10CD90000000000000000000000000000000000093
-:10CDA0000000000000000000000000000000000083
-:10CDB0000000000000000000000000000000000073
-:10CDC0000000000000000000000000000000000063
-:10CDD0000000000000000000000000000000000053
-:10CDE0000000000000000000000000000000000043
-:10CDF0000000000000000000000000000000000033
-:10CE00000000000000000000000000000000000022
-:10CE10000000000000000000000000000000000012
-:10CE20000000000000000000000000000000000002
-:10CE300000000000000000000000000000000000F2
-:10CE400000000000000000000000000000000000E2
-:10CE500000000000000000000000000000000000D2
-:10CE600000000000000000000000000000000000C2
-:10CE700000000000000000000000000000000000B2
-:10CE800000000000000000000000000000000000A2
-:10CE90000000000000000000000000000000000092
-:10CEA0000000000000000000000000000000000082
-:10CEB0000000000000000000000000000000000072
-:10CEC0000000000000000000000000000000000062
-:10CED0000000000000000000000000000000000052
-:10CEE0000000000000000000000000000000000042
-:10CEF0000000000000000000000000000000000032
-:10CF00000000000000000000000000000000000021
-:10CF10000000000000000000000000000000000011
-:10CF20000000000000000000000000000000000001
-:10CF300000000000000000000000000000000000F1
-:10CF400000000000000000000000000000000000E1
-:10CF500000000000000000000000000000000000D1
-:10CF600000000000000000000000000000000000C1
-:10CF700000000000000000000000000000000000B1
-:10CF800000000000000000000000000000000000A1
-:10CF90000000000000000000000000000000000091
-:10CFA0000000000000000000000000000000000081
-:10CFB0000000000000000000000000000000000071
-:10CFC0000000000000000000000000000000000061
-:10CFD0000000000000000000000000000000000051
-:10CFE0000000000000000000000000000000000041
-:10CFF0000000000000000000000000000000000031
-:10D000000000000000000000000000000000000020
-:10D010000000000000000000000000000000000010
-:10D020000000000000000000000000000000000000
-:10D0300000000000000000000000000000000000F0
-:10D0400000000000000000000000000000000000E0
-:10D0500000000000000000000000000000000000D0
-:10D0600000000000000000000000000000000000C0
-:10D0700000000000000000000000000000000000B0
-:10D0800000000000000000000000000000000000A0
-:10D090000000000000000000000000000000000090
-:10D0A0000000000000000000000000000000000080
-:10D0B0000000000000000000000000000000000070
-:10D0C0000000000000000000000000000000000060
-:10D0D0000000000000000000000000000000000050
-:10D0E0000000000000000000000000000000000040
-:10D0F0000000000000000000000000000000000030
-:10D10000000000000000000000000000000000001F
-:10D11000000000000000000000000000000000000F
-:10D1200000000000000000000000000000000000FF
-:10D1300000000000000000000000000000000000EF
-:10D1400000000000000000000000000000000000DF
-:10D1500000000000000000000000000000000000CF
-:10D1600000000000000000000000000000000000BF
-:10D1700000000000000000000000000000000000AF
-:10D18000000000000000000000000000000000009F
-:10D19000000000000000000000000000000000008F
-:10D1A000000000000000000000000000000000007F
-:10D1B000000000000000000000000000000000006F
-:10D1C000000000000000000000000000000000005F
-:10D1D000000000000000000000000000000000004F
-:10D1E000000000000000000000000000000000003F
-:10D1F000000000000000000000000000000000002F
-:10D20000000000000000000000000000000000001E
-:10D21000000000000000000000000000000000000E
-:10D2200000000000000000000000000000000000FE
-:10D2300000000000000000000000000000000000EE
-:10D2400000000000000000000000000000000000DE
-:10D2500000000000000000000000000000000000CE
-:10D2600000000000000000000000000000000000BE
-:10D2700000000000000000000000000000000000AE
-:10D28000000000000000000000000000000000009E
-:10D29000000000000000000000000000000000008E
-:10D2A000000000000000000000000000000000007E
-:10D2B000000000000000000000000000000000006E
-:10D2C000000000000000000000000000000000005E
-:10D2D000000000000000000000000000000000004E
-:10D2E000000000000000000000000000000000003E
-:10D2F000000000000000000000000000000000002E
-:10D30000000000000000000000000000000000001D
-:10D31000000000000000000000000000000000000D
-:10D3200000000000000000000000000000000000FD
-:10D3300000000000000000000000000000000000ED
-:10D3400000000000000000000000000000000000DD
-:10D3500000000000000000000000000000000000CD
-:10D3600000000000000000000000000000000000BD
-:10D3700000000000000000000000000000000000AD
-:10D38000000000000000000000000000000000009D
-:10D39000000000000000000000000000000000008D
-:10D3A000000000000000000000000000000000007D
-:10D3B000000000000000000000000000000000006D
-:10D3C000000000000000000000000000000000005D
-:10D3D000000000000000000000000000000000004D
-:10D3E000000000000000000000000000000000003D
-:10D3F000000000000000000000000000000000002D
-:10D40000000000000000000000000000000000001C
-:10D41000000000000000000000000000000000000C
-:10D4200000000000000000000000000000000000FC
-:10D4300000000000000000000000000000000000EC
-:10D4400000000000000000000000000000000000DC
-:10D4500000000000000000000000000000000000CC
-:10D4600000000000000000000000000000000000BC
-:10D4700000000000000000000000000000000000AC
-:10D48000000000000000000000000000000000009C
-:10D49000000000000000000000000000000000008C
-:10D4A000000000000000000000000000000000007C
-:10D4B000000000000000000000000000000000006C
-:10D4C000000000000000000000000000000000005C
-:10D4D000000000000000000000000000000000004C
-:10D4E000000000000000000000000000000000003C
-:10D4F000000000000000000000000000000000002C
-:10D50000000000000000000000000000000000001B
-:10D51000000000000000000000000000000000000B
-:10D5200000000000000000000000000000000000FB
-:10D5300000000000000000000000000000000000EB
-:10D5400000000000000000000000000000000000DB
-:10D5500000000000000000000000000000000000CB
-:10D5600000000000000000000000000000000000BB
-:10D5700000000000000000000000000000000000AB
-:10D58000000000000000000000000000000000009B
-:10D59000000000000000000000000000000000008B
-:10D5A000000000000000000000000000000000007B
-:10D5B000000000000000000000000000000000006B
-:10D5C000000000000000000000000000000000005B
-:10D5D000000000000000000000000000000000004B
-:10D5E000000000000000000000000000000000003B
-:10D5F000000000000000000000000000000000002B
-:10D60000000000000000000000000000000000001A
-:10D61000000000000000000000000000000000000A
-:10D6200000000000000000000000000000000000FA
-:10D6300000000000000000000000000000000000EA
-:10D6400000000000000000000000000000000000DA
-:10D6500000000000000000000000000000000000CA
-:10D6600000000000000000000000000000000000BA
-:10D6700000000000000000000000000000000000AA
-:10D68000000000000000000000000000000000009A
-:10D69000000000000000000000000000000000008A
-:10D6A000000000000000000000000000000000007A
-:10D6B000000000000000000000000000000000006A
-:10D6C000000000000000000000000000000000005A
-:10D6D000000000000000000000000000000000004A
-:10D6E000000000000000000000000000000000003A
-:10D6F000000000000000000000000000000000002A
-:10D700000000000000000000000000000000000019
-:10D710000000000000000000000000000000000009
-:10D7200000000000000000000000000000000000F9
-:10D7300000000000000000000000000000000000E9
-:10D7400000000000000000000000000000000000D9
-:10D7500000000000000000000000000000000000C9
-:10D7600000000000000000000000000000000000B9
-:10D7700000000000000000000000000000000000A9
-:10D780000000000000000000000000000000000099
-:10D790000000000000000000000000000000000089
-:10D7A0000000000000000000000000000000000079
-:10D7B0000000000000000000000000000000000069
-:10D7C0000000000000000000000000000000000059
-:10D7D0000000000000000000000000000000000049
-:10D7E0000000000000000000000000000000000039
-:10D7F0000000000000000000000000000000000029
-:10D800000000000000000000000000000000000018
-:10D810000000000000000000000000000000000008
-:10D8200000000000000000000000000000000000F8
-:10D8300000000000000000000000000000000000E8
-:10D8400000000000000000000000000000000000D8
-:10D8500000000000000000000000000000000000C8
-:10D8600000000000000000000000000000000000B8
-:10D8700000000000000000000000000000000000A8
-:10D880000000000000000000000000000000000098
-:10D890000000000000000000000000000000000088
-:10D8A0000000000000000000000000000000000078
-:10D8B0000000000000000000000000000000000068
-:10D8C0000000000000000000000000000000000058
-:10D8D0000000000000000000000000000000000048
-:10D8E0000000000000000000000000000000000038
-:10D8F0000000000000000000000000000000000028
-:10D900000000000000000000000000000000000017
-:10D910000000000000000000000000000000000007
-:10D9200000000000000000000000000000000000F7
-:10D9300000000000000000000000000000000000E7
-:10D9400000000000000000000000000000000000D7
-:10D9500000000000000000000000000000000000C7
-:10D9600000000000000000000000000000000000B7
-:10D9700000000000000000000000000000000000A7
-:10D980000000000000000000000000000000000097
-:10D990000000000000000000000000000000000087
-:10D9A0000000000000000000000000000000000077
-:10D9B0000000000000000000000000000000000067
-:10D9C0000000000000000000000000000000000057
-:10D9D0000000000000000000000000000000000047
-:10D9E0000000000000000000000000000000000037
-:10D9F0000000000000000000000000000000000027
-:10DA00000000000000000000000000000000000016
-:10DA10000000000000000000000000000000000006
-:10DA200000000000000000001000000300000000E3
-:10DA30000000000D0000000D3C020800244271406F
-:10DA40003C030800246375E0AC4000000043202B39
-:10DA50001480FFFD244200043C1D080037BD7FFCFC
-:10DA600003A0F0213C100800261031D83C1C08000F
-:10DA7000279C71400E0010ED000000000000000D1A
-:10DA800030A5FFFF30C600FF274301808F4201B859
-:10DA90000440FFFE24020002AC640000A4650008FC
-:10DAA000A066000AA062000B3C021000AC670018E0
-:10DAB00003E00008AF4201B83C0360008C624FF8FD
-:10DAC0000440FFFE3C020200AC644FC0AC624FC495
-:10DAD0003C02100003E00008AC624FF89482000C96
-:10DAE0002486001400A038210002130200021080D6
-:10DAF0000082402100C8102B104000570000000099
-:10DB000090C300002C6200095040005190C20001F7
-:10DB1000000310803C030800246370F000431021D0
-:10DB20008C420000004000080000000090C300018B
-:10DB30002402000A1462003A0000000001061023CB
-:10DB40002C42000A1440003624C600028CE2000079
-:10DB500034420100ACE2000090C2000090C300011A
-:10DB600090C4000290C5000300031C0000021600D0
-:10DB70000043102500042200004410250045102514
-:10DB800024C60004ACE2000490C2000090C300016F
-:10DB900090C4000290C500030002160000031C00A0
-:10DBA00000431025000422000044102500451025E4
-:10DBB00024C600040A000CAAACE2000890C30001CD
-:10DBC000240200041462001624C6000290C2000061
-:10DBD00090C400018CE300000002120000441025F4
-:10DBE0003463000424C60002ACE2000C0A000CAA54
-:10DBF000ACE3000090C3000124020003146200089B
-:10DC000024C600028CE2000090C3000024C600017C
-:10DC100034420008A0E300100A000CAAACE20000A5
-:10DC200003E000082402000190C300012402000266
-:10DC30001062000224C40002010020210A000CAA84
-:10DC4000008030210A000CAA24C6000190C2000105
-:10DC50000A000CAA00C2302103E0000800001021D5
-:10DC600027BDFFE8AFBF0014AFB000100E0011FEDB
-:10DC700000808021936200052403FFFE0200202122
-:10DC8000004310248FBF00148FB00010A362000562
-:10DC90000A00120727BD001827BDFFE8AFB000102B
-:10DCA000AFBF00140E000F180080802193620000A7
-:10DCB00024030050304200FF1443000424020100FA
-:10DCC000AF4201800A000D2202002021AF400180F6
-:10DCD000020020218FBF00148FB000100A000F79BE
-:10DCE00027BD001827BDFF80AFBE0078AFB7007416
-:10DCF000AFB30064AFBF007CAFB60070AFB5006CCF
-:10DD0000AFB40068AFB20060AFB1005CAFB0005814
-:10DD10008F5001289363003F936200050000F021BB
-:10DD2000307300FF00021027304200010000B821CC
-:10DD300014400066AFA000509342011693430112B5
-:10DD4000304200FF306300FF0342202103431021D3
-:10DD5000244540008F820018104000182491400094
-:10DD60008F4201043C0300010043102410400013C3
-:10DD7000000000008CA3000C8F620030146201B51B
-:10DD8000240200018CA300108F62002C146201B1E8
-:10DD9000240200019762003A948340003042FFFF62
-:10DDA000146201AC2402000197620038962300023D
-:10DDB0003042FFFF146201A72402000193620000B9
-:10DDC000304300FF240200201062000524020050AE
-:10DDD00010620006000000000A000D6C0000000048
-:10DDE0000000000D0A000D75AFA000303C1E0800B9
-:10DDF00027DE71A00A000D75AFA000303C020800BC
-:10DE00008C4200DC244200013C010800AC2200DC12
-:10DE10000E0012C8000000000A000F038FBF007C34
-:10DE20008F4201043C0300209234000D0043102473
-:10DE30000002202B00042140AFA400308F430104D6
-:10DE40003C02004000621824146000023487004045
-:10DE50000080382132820020AFA700301440000239
-:10DE600034E6008000E0302110C0000BAFA6003087
-:10DE700093C500088F67004C0200202100052B008D
-:10DE800034A5008130A5F0810E000C8D30C600FF56
-:10DE90000A000F00000000009362003E3042004084
-:10DEA0001040000E240200045662000624020012F4
-:10DEB000020020210E0013D6022030210A000F0399
-:10DEC0008FBF007C16620005000000000E000D13DD
-:10DED000000020210A000F038FBF007C9743011A26
-:10DEE0009624000E93620035328500043076FFFFE1
-:10DEF00000442004AFA400548E32000410A000158A
-:10DF00008E3500089362003E30420040104000070A
-:10DF1000000000000E001318024020211040000DE8
-:10DF2000000000000A000F00000000008F620044A3
-:10DF30000242102304400145000000008F620048A7
-:10DF40000242102304410141240400160A000E037A
-:10DF50008FC200048F620048024210230440000870
-:10DF6000000000003C0208008C4231002442000105
-:10DF70003C010800AC2231000A000EF50000000050
-:10DF80008F62004002421023184000092402000C56
-:10DF90003C0208008C423100329400FC0000B021A9
-:10DFA000244200013C010800AC2231002402000C94
-:10DFB000AFA200308F620040005220231880000D75
-:10DFC00002C4102A14400116000000001496000636
-:10DFD00002C410233A8200013042000114400110B3
-:10DFE0000000000002C41023024490210A000DEB3F
-:10DFF0003056FFFF00002021328200021040001A3C
-:10E00000328200109362003E3042004050400011C6
-:10E010008FC200040E0011FE02002021240200180D
-:10E02000A362003F936200052403FFFE020020214B
-:10E03000004310240E001207A362000524040039D7
-:10E04000000028210E001301240600180A000F0208
-:10E0500024020001240400170040F8090000000019
-:10E060000A000F0224020001104000F80000000026
-:10E070008F63004C8F62005402A210231C4000F3F7
-:10E0800002A31023044200010060A821AFA40018DD
-:10E09000AFB20010AFB60014934201208F6500406C
-:10E0A0009763003C304200FF0342102100441021DE
-:10E0B0008FA400543063FFFF244240000083182BDC
-:10E0C0008FA40030AFA20020AFA500280083202538
-:10E0D000AFA40030AFA50024AFA0002CAFB5003432
-:10E0E0009362003E30420008504000118FC2000091
-:10E0F0000220202127A500380E000CA4AFA0003874
-:10E100005440000B8FC200008FA200383042010043
-:10E11000504000078FC200008FA3003C8F62006058
-:10E120000062102304430001AF6300608FC200004F
-:10E130000040F80927A400108FA2003030420002EE
-:10E1400054400001329400FE9362003E3042004091
-:10E15000104000378FA300148F62005416A2001ADB
-:10E160003282000124020014126200102A6200159B
-:10E1700010400006240200162402000C1262000760
-:10E18000328200010A000E5F0000000012620005EA
-:10E19000328200010A000E5F000000000A000E5AE1
-:10E1A0002417000E0A000E5A241700100A000E5EF3
-:10E1B00024170012936200232403FFBD00431024A0
-:10E1C000A362002332820001104000198FA30014C3
-:10E1D0002402000C1262000E2A62000D104000069C
-:10E1E0002402000E2402000A126200078FA20024FB
-:10E1F0000A000E7724420001126200088FA2002458
-:10E200000A000E77244200010A000E752417000848
-:10E210002402000E16E20002241700162417001034
-:10E220008FA2002424420001AFA200248FA3001477
-:10E230008FA200248F73004000431021AF62004082
-:10E240008FA20054936400368F63004002A288219D
-:10E250003402FFFF0082100400621821AF630048FF
-:10E260008FA6003030C200081040000E00000000F1
-:10E270008F6200581622000430C600FF9742011A30
-:10E280005040000134C6001093C500088FA7003429
-:10E290000200202100052B0034A500800E000C8D0B
-:10E2A00030A5F0808F620040005310231840001703
-:10E2B0008FA200183C0208008C42319830420010B6
-:10E2C0001040000924020001976200681440000613
-:10E2D00024020001A76200689742007A2442000AE3
-:10E2E0000A000EBBA7620012A76200120E0011FE08
-:10E2F000020020219362007D2403000102002021FE
-:10E30000344200010A000EB9AFA300501840000AC1
-:10E31000000000000E0011FE020020219362007D2B
-:10E320002403000102002021AFA300503442000466
-:10E330000E001207A362007D9362003E304200404F
-:10E340001440000C328200011040000A000000005E
-:10E350008F6300408FC2000424040018246300016E
-:10E360000040F809AF6300408FA200300A000F029E
-:10E37000304200048F62005810510010000000006D
-:10E380008F620018024210231C4000082404000180
-:10E390008F62001816420009000000008F62001C06
-:10E3A00002A210230440000500000000AF710058D5
-:10E3B000AFA40050AF720018AF75001C12E0000B44
-:10E3C0008FA200500E0011FE02002021A377003F13
-:10E3D0000E0012070200202102E030212404003741
-:10E3E0000E001301000028218FA2005010400003EE
-:10E3F000000000000E000C9B0200202112C000054E
-:10E40000000018218FA2003030420004504000115B
-:10E4100000601021240300010A000F020060102197
-:10E420000E0011FE020020219362007D02002021D7
-:10E43000344200040E001207A362007D0E000C9B04
-:10E44000020020210A000F0224020001AF40004414
-:10E45000240200018FBF007C8FBE00788FB700744C
-:10E460008FB600708FB5006C8FB400688FB30064F6
-:10E470008FB200608FB1005C8FB0005803E00008DD
-:10E4800027BD00808C8700048C86000000001021CE
-:10E4900000E5382100E5282B00C2302100C53021DD
-:10E4A000AC87000403E00008AC8600008F4201B88E
-:10E4B0000440FFFE24020800AF4201B803E0000858
-:10E4C000000000003C0200080342282194A20048FA
-:10E4D0003084FFFF1040001B2484001294A20048E7
-:10E4E0003042FFFF0044102A1040001724020003AE
-:10E4F0002402001A93430120A342018B8F82000063
-:10E50000306300FF30424000104000092463FFFEEA
-:10E5100094A200483042FFFF0043102B1440000536
-:10E520008F820004A74301940A000F3C344200018B
-:10E530008F8200042403FFFE0043102403E0000840
-:10E54000AF8200042402000303E00008A342018B11
-:10E5500027BDFFE0AFB20018AFB10014AFB000109C
-:10E56000AFBF001C30B1FFFF30D0FFFF30F2FFFF24
-:10E570008F4201B80440FFFE00000000AF4401805C
-:10E58000AF4400200E000F1E020020218F830000E8
-:10E590008F840004A751018CA750018EA7430190DE
-:10E5A0008F83000830828000AF4301A8A752018802
-:10E5B0001040000E8F82000493420116304200FC8E
-:10E5C00024420004005A10218C4240003042FFFFD8
-:10E5D000144000068F8200043C02FFFF34427FFF9C
-:10E5E00000821024AF8200048F8200042403BFFF46
-:10E5F00000431024A74201A69743010C8F42010457
-:10E6000000031C003042FFFF00621825AF4301AC3D
-:10E610003C021000AF4201B88FBF001C8FB200183F
-:10E620008FB100148FB0001003E0000827BD002058
-:10E630003C0208008C42003827BDFFC8AFB200285A
-:10E64000AFBF0030AFB3002CAFB10024AFB000209B
-:10E65000000090213C0E080025CE00381440000236
-:10E66000244DFFFF000068218F84000030824000AD
-:10E670001040000A308280003C02002000821024FA
-:10E6800050400006308280008F8200042403BFFFC8
-:10E69000008318240A000F9D344210001040000A25
-:10E6A0003C02002000821024104000078F820004EA
-:10E6B0003C03FFFF34637FFF008318243442800053
-:10E6C000AF820004AF8300008F48007093420112B4
-:10E6D0008F860000304200FF0002288230C2010015
-:10E6E0001040004324A4000330C24000104000103A
-:10E6F00030C2200000041080005A10218C434000DA
-:10E7000024A4000400041080AFA30010005A1021BC
-:10E710008C424000AFA2001493420116304200FC2C
-:10E72000005A10218C4240000A000FC4AFA200180A
-:10E730001040002F00041080005A10218C4340002C
-:10E7400024A4000400041080AFA30010005A10217C
-:10E750008C424000AFA00018AFA200148FA900188F
-:10E760000000382100002021240C000827AB0010F5
-:10E770003C0A0800254A010001641021148C0003A2
-:10E7800000042A001120000A00000000904200004E
-:10E79000248400012C83000C00A2102100021080B0
-:10E7A000004A10218C4200001460FFF300E238267A
-:10E7B0003C0408008C8431048F4200702C830020BC
-:10E7C00010600009004840233C030800246331081E
-:10E7D000000410800043102124830001AC48000095
-:10E7E0003C010800AC2331040A000FEFAF8700089A
-:10E7F0009743011E9742011C3063FFFF0002140083
-:10E8000000621825AF8300089742010C8F43400037
-:10E810003044FFFF3402FFFF1462000300000000D9
-:10E820000A000FFB241200208F42400030420100FA
-:10E83000544000012412001030C210005040001457
-:10E840003652000130C200201440000B3C02100080
-:10E8500000C210245040000E365200013C030E004E
-:10E860003C020DFF00C318243442FFFF0043102B6D
-:10E8700050400007365200013C0208008C42002C38
-:10E88000244200013C010800AC22002C3652000555
-:10E890003C0508008CA5003454A000248F8400009F
-:10E8A0008F82000C544000218F8400008F8200046E
-:10E8B000304240005440001D8F8400003C021F0184
-:10E8C00000C288243C021000562200188F840000E9
-:10E8D00030820200144000158F8400009750010E12
-:10E8E000AF400180AF400020261000043210FFFF2F
-:10E8F0000E000F1E020020218F8300042402BFFFA0
-:10E90000364400020062182424020002A742018C4F
-:10E910008F820000A750018EA7440188A74301A65B
-:10E92000A7420190AF5101B80A0010D93C02000182
-:10E93000008210241040000C3C0210003C02080031
-:10E940008C4200D89746010E240400802442000126
-:10E9500030C6FFFF240500023C010800AC2200D8AD
-:10E960000A0010E324070003008210241040004531
-:10E97000000000003C0208008C4200301040000DF6
-:10E980008F820004304240001040000A3C030F0018
-:10E99000008318243C0201000043102B14400005A2
-:10E9A000000000009746010E364700020A0010E002
-:10E9B0002404008010A0000D308201001040000BE4
-:10E9C0003C020F00008210243C03020010430007A9
-:10E9D0008F820008004D1024004E10219042000448
-:10E9E000244200040A00108B000221C00000000035
-:10E9F0008F8600003C0508008CA500D0000616029A
-:10EA00003050000F38A200012C4200012E03000CF0
-:10EA10000043102414400018001021C02602FFFCFF
-:10EA20002C420004544000140000202138A20002AF
-:10EA30002C42000100431024104000030006124243
-:10EA40000A00108B000020210010182B0043102416
-:10EA500050400009001021C09746010E00002021FF
-:10EA60002405000224C6000430C6FFFF0E000F413B
-:10EA70003247FFFB001021C09746010E0A0010E04C
-:10EA8000364700028F4240003C1108008E310024BE
-:10EA90003042010010400048322200010220802153
-:10EAA00010A00017325300043082010010400015FE
-:10EAB000240200013C020F00008210243C030200EB
-:10EAC0001043000F8F8200089746010E0240382144
-:10EAD000004D1024004E10219044000424C6000470
-:10EAE00030C6FFFF24840004000421C00E000F4143
-:10EAF000240500022402FFFE022280243252FFFB82
-:10EB00002402000116020007320200013242000412
-:10EB100050400001365200029746010E0A0010DFF5
-:10EB2000024038211040000A320200049746010ECC
-:10EB3000024038210000202124C6000430C6FFFF17
-:10EB40000E000F41240500023252FFFB3202000486
-:10EB50001040000B8F820000304208001040000877
-:10EB6000000000009746010E0240382124040100F5
-:10EB700024C6000430C6FFFF0E000F41240500022A
-:10EB8000166000188FBF0030274301808F4201B804
-:10EB90000440FFFE24022000A462000824020002B8
-:10EBA000A062000BA46000103C021000AF4201B84C
-:10EBB0000A0010E68FBF00301040000A8FBF0030FF
-:10EBC0009746010E364700020000202124C60004AB
-:10EBD00030C6FFFF240500020E000F4100000000B8
-:10EBE0008FBF00308FB3002C8FB200288FB100246C
-:10EBF0008FB000200000102103E0000827BD00387E
-:10EC000027BDFFE8AFB000103C04600CAFBF00149C
-:10EC10008C8250002403FF7F3C1A800000431024A4
-:10EC20003442380CAC825000240200033C106000D7
-:10EC3000AF4200088E0208083C1B80083C01080017
-:10EC4000AC2000203042FFF0384200102C4200017E
-:10EC50000E001B35AF8200183C04FFFF3C0204008D
-:10EC6000348308063442000CAE021948AE03194C36
-:10EC70003C0560168E0219808CA30000344202000D
-:10EC800000641824AE0219803C025353146200033E
-:10EC900034A47C008CA20004005020218C82007CD3
-:10ECA0008C830078AF820014AF8300103C02800098
-:10ECB000344200708C43000000403821AF83001CB8
-:10ECC000006030218CE800003C0508008CA500FCA9
-:10ECD0003C0408008C8400F8010630230000102159
-:10ECE00000A6282100A6302B0082202100862021AA
-:10ECF0003C010800AC2500FC3C010800AC2400F8F5
-:10ED00008F500000320200031040FFEE010030215E
-:10ED10008CE600003C0508008CA500FC3C040800C3
-:10ED20008C8400F800C8302300A6282100001021A0
-:10ED300000A6302B0082202100862021320700010E
-:10ED40003C010800AC2500FCAF88001C3C01080019
-:10ED5000AC2400F810E00064320200028F42012867
-:10ED6000AF4200208F4201048F430100AF820000B8
-:10ED70000E000F18AF8300048F4340003402FFFFE2
-:10ED800014620006000000009745010E3C040800D4
-:10ED9000248400F00A00115B000000008F42400054
-:10EDA000304201001040000B000000009745010EAA
-:10EDB0003C040800248400E80E000F0E30A5FFFF7D
-:10EDC0009745010E3C040800248431C80A001172E2
-:10EDD000000000008F4340008F8200101462000A80
-:10EDE000000000008F4340048F820014146200066C
-:10EDF000000000009745010E3C040800248431B84F
-:10EE00000A001172000000009745010E3C04080042
-:10EE1000248400E00E000F0E30A5FFFF3C02080026
-:10EE20008C4200C0104000088F8400003C020800A3
-:10EE30008C4200C4244200013C010800AC2200C402
-:10EE40000A00119F000000003C0200100082102404
-:10EE50001440000A8F8300043C0208008C4200200A
-:10EE6000244200013C010800AC2200200E000F7972
-:10EE7000000020210A00119D000000002402BFFFB5
-:10EE8000006210241040000800000000240287FFE8
-:10EE900000621024144000083C020060008210242C
-:10EEA00010400005000000000E000D2600000000CC
-:10EEB0000A00119D000000000E0011E80000000093
-:10EEC000104000063C0240008F4301243C026020B9
-:10EED000AC430014000000003C024000AF42013887
-:10EEE00000000000320200021040FF713C0280006E
-:10EEF0008F4201403C044000AF4200208F43014854
-:10EF00003C027000006218241064002D0000000014
-:10EF10000083102B144000063C0260003C022000DD
-:10EF2000106200073C0240000A0011E400000000EB
-:10EF300010620027000000000A0011E43C024000BB
-:10EF40008F4201482403000400021402304200FFF3
-:10EF50001443000B274401808F4301408F4201B8C6
-:10EF60000440FFFE2402001CAC830000A082000BC2
-:10EF70003C021000AF4201B80A0011E43C0240001C
-:10EF80008F4201B80440FFFE000000008F4201489C
-:10EF900000021402A482000824020002A082000BD6
-:10EFA0008F420148A48200108F420144AC820024A9
-:10EFB0003C021000AF4201B80A0011E43C024000DC
-:10EFC0000E00120C000000000A0011E43C02400098
-:10EFD0000E001B42000000003C024000AF420178DE
-:10EFE000000000000A0011193C0280008F4201005D
-:10EFF0003042003E1440001124020001AF4000489E
-:10F000008F420100304207C01040000500000000A0
-:10F01000AF40004CAF40005003E000082402000164
-:10F02000AF400054AF4000408F42010030423800F2
-:10F0300054400001AF4000442402000103E00008F6
-:10F04000000000003C0290003442000100822025B4
-:10F05000AF4400208F4200200440FFFE000000006B
-:10F0600003E00008000000003C0280003442000180
-:10F070000082202503E00008AF44002027BDFFE008
-:10F08000AFB20018AFBF001CAFB10014AFB000109A
-:10F090008F5001408F5101483C02800000119402C2
-:10F0A00002222024324300FF2402000E1062008A54
-:10F0B0002862000F10400012286200372402000668
-:10F0C0001062003B2862000710400007240200097C
-:10F0D0001060001A240200011062002500000000E8
-:10F0E0000A0012C1000000001062007B2402000B25
-:10F0F0001062005B3222FFFF0A0012C10000000014
-:10F1000010400008240200382862003510400080BA
-:10F110002402001F1062007E000000000A0012C1DD
-:10F12000000000001062007A240200801062004299
-:10F13000000000000A0012C1000000008F4201B868
-:10F140000440FFFE24020001AF500180AF40018463
-:10F15000A7520188A342018A24020002A342018B24
-:10F16000A75101908F4201440A0012BCAF4201A492
-:10F170001080000A240200023C010800A0227190C5
-:10F180003C010800AC3071988F4201443C010800FA
-:10F19000AC2271940A0012C38FBF001C8F4201B8C9
-:10F1A0000440FFFE240200020A0012A60000000034
-:10F1B0008F4201B80440FFFE00000000AF50018004
-:10F1C0003C0208009042719010400003000018219A
-:10F1D0003C0308008C637198AF430184A7520188F7
-:10F1E0003C02080090427190000018213442000156
-:10F1F000A342018A24020002A342018BA75101907D
-:10F200008F420144AF4201A43C0208009042719039
-:10F21000104000033C0210003C0308008C63719412
-:10F22000AF4301A8AF4201B83C010800A020719093
-:10F230000A0012C38FBF001C8F4201B80440FFFEBA
-:10F2400024020002A342018BA7520188A75101901A
-:10F250008F420144A74201920A0012BE3C021000F4
-:10F260001440001D000000009362000530420004BD
-:10F2700014400037000000000E0011FE02002021A3
-:10F280009362000502002021344200040E001207A0
-:10F29000A36200059362000530420004144000029E
-:10F2A000000000000000000D936200002403002015
-:10F2B000304200FF14430008000000008F4201B8F4
-:10F2C0000440FFFE24020005AF500180A342018BE1
-:10F2D0003C021000AF4201B88F4201B80440FFFE6B
-:10F2E00024020002AF400180AF500184A752018880
-:10F2F000A342018AA342018BA7510190AF4001A410
-:10F300008F420144AF4201A80A0012BE3C02100025
-:10F310008F4201B80440FFFE24020001AF5001807B
-:10F32000AF400184A7520188A342018A240200024F
-:10F33000A342018BA7510190AF4001A4AF4001A8A7
-:10F340003C021000AF4201B80A0012C38FBF001C7C
-:10F350000000000D8FBF001C8FB200188FB1001489
-:10F360008FB0001003E0000827BD002027BDFFE894
-:10F37000AFBF00100E000F1800000000AF4001806A
-:10F380008FBF0010000020210A000F7927BD001850
-:10F390003084FFFF30A5FFFF000018211080000718
-:10F3A00000000000308200011040000200042042F2
-:10F3B000006518210A0012D40005284003E0000867
-:10F3C0000060102110C0000624C6FFFF8CA20000C0
-:10F3D00024A50004AC8200000A0012DE248400048C
-:10F3E00003E000080000000010A0000824A3FFFFB5
-:10F3F000AC86000000000000000000002402FFFFB7
-:10F400002463FFFF1462FFFA2484000403E0000871
-:10F410000000000027BDFFE8AFBF0014AFB0001030
-:10F420000E0011FE008080219362007D02002021E9
-:10F43000344200200E001207A362007D020020214A
-:10F440008FBF00148FB000100A000C9B27BD00185E
-:10F45000308300FF30A500FF30C600FF2747018042
-:10F460008F4201B80440FFFE000000008F420128D7
-:10F4700034634000ACE2000024020001ACE0000470
-:10F48000A4E30008A0E2000A24020002A0E2000BAC
-:10F490003C021000A4E50010ACE00024ACE0002821
-:10F4A000A4E6001203E00008AF4201B827BDFFE860
-:10F4B000AFBF00109362003F24030012304200FFF0
-:10F4C0001043000D008030218F6200440082102321
-:10F4D0000440000A8FBF00108F62004824040039E6
-:10F4E0000000282100C21023044100042406001259
-:10F4F0000E001301000000008FBF00102402000165
-:10F5000003E0000827BD001827BDFFC8AFB1002CDD
-:10F5100000A08821AFB2003027A500100080902104
-:10F5200002202021AFBF0034AFB000280E000CA491
-:10F53000AFA0001010400009024020218E220008D8
-:10F54000AF6200840E0012F2AF6000402404003865
-:10F550002405008D0A0013CD240600129362003E9C
-:10F56000304200081040000F8FA20010304201000E
-:10F57000104000078FA300148F6200600062102308
-:10F5800004430008AF6300600A0013560000000047
-:10F59000AF6000609362003E2403FFF70043102435
-:10F5A000A362003E9362003E304200081440000215
-:10F5B0002406000300003021936200349363003777
-:10F5C0008F640084304200FF306300FF0066182122
-:10F5D000000318800043282100A4202B1080000B7A
-:10F5E000000000009763003C8F6200843063FFFFDF
-:10F5F000004510230062182B146000040000000076
-:10F600008F6200840A001372004580239762003CD9
-:10F610003050FFFF8FA30010306200041040000440
-:10F62000000628808FA2001C0A00137A0202102B09
-:10F630002E02021850400003240202180A0013830D
-:10F6400002051023306300041060000300451023FE
-:10F650008FA2001C00451023004080212C42008016
-:10F6600054400001241000800E0011FE02402021B1
-:10F6700024020001AF62000C9362003E00102040A3
-:10F680003042007FA362003E8E220004244200012B
-:10F69000AF620040A770003C8F6200509623000EBE
-:10F6A00000431021AF6200588F62005000441021C7
-:10F6B000AF62005C8E220004AF6200188E22000848
-:10F6C000AF62001C8FA20010304200085440000AB4
-:10F6D00093A20020A3600036936200362403FFDF6C
-:10F6E000A36200359362003E00431024A362003EF3
-:10F6F0000A0013AD8E220008A36200358E22000896
-:10F70000AF62004C8F6200248F63004000431021E1
-:10F71000AF6200489362000024030050304200FFB3
-:10F72000144300122403FF803C0208008C4231A0E5
-:10F730000242102100431024AF4200283C0208007E
-:10F740008C4231A08E2400083C03000C02421021A0
-:10F750003042007F0342102100431021AC4400D806
-:10F760008E230008AF820024AC4300DC0E00120799
-:10F770000240202124040038000028212406000A29
-:10F780000E001301000000008FBF00348FB2003064
-:10F790008FB1002C8FB000282402000103E0000884
-:10F7A00027BD003827BDFFE8AFBF001090C7000D90
-:10F7B00000C0282130E6001010C0000A30E200042A
-:10F7C0008CA300088F6200541062000630E200042F
-:10F7D000144000178FBF0010000020210A000D13F5
-:10F7E00027BD00181040000D30E3001210C00010BB
-:10F7F0008FBF00108CA300088F6200541462000DAC
-:10F8000024020001240400382405008D0E00130199
-:10F81000240600120A0013F98FBF00102402001200
-:10F82000146200038FBF00100A00132F27BD0018B9
-:10F830002402000103E0000827BD001827BDFFF8DF
-:10F8400027420180AFA20000308A00FF8F4201B83A
-:10F850000440FFFE000000008F4601283C02080023
-:10F860008C4231A02403FF80AF86004C00C21021DF
-:10F8700000431024AF4200243C0208008C4231A017
-:10F880008FA900008FA8000000C210213042007F25
-:10F89000034218213C02000A00621821946400D43B
-:10F8A0008FA700008FA5000024020002AF83002470
-:10F8B000A0A2000B8FA30000354260003084FFFF40
-:10F8C000A4E200083C021000AD260000AD040004D4
-:10F8D000AC60002427BD0008AF4201B803E0000877
-:10F8E000240200018C8200048F8300240045102331
-:10F8F000AC820004906200633042007FA06200632B
-:10F900008C8200209383002C8F85002434420002D7
-:10F91000AF830040A780003EAC820020A4A000E49A
-:10F9200090A200632403FFBF0043102403E00008FB
-:10F93000A0A20063274301808F4201B80440FFFE6C
-:10F940008F82004CAC6200008F420124AC62000444
-:10F9500024026083A462000824020002A062000B5B
-:10F960003C02100003E00008AF4201B88F8800405D
-:10F970009382002C8F8300243C07080024E775AC99
-:10F9800000481023304200FF304900FC2465008805
-:10F990008F860044304A0003112000090000202116
-:10F9A000248200048CA30000304400FF0089102A48
-:10F9B000ACE3000024A500041440FFF924E7000490
-:10F9C00011400009000020212482000190A30000C2
-:10F9D000304400FF008A102BA0E3000024A50001A2
-:10F9E0001440FFF924E7000130C200031440000472
-:10F9F0008F850040310200031040000D0000000020
-:10FA000010A00009000020212482000190C3000002
-:10FA1000304400FF0085102BA0E3000024C6000145
-:10FA20001440FFF924E7000103E000080000000093
-:10FA30001100FFFD00002021248200048CC300007F
-:10FA4000304400FF0088102BACE3000024C6000403
-:10FA50001440FFF924E7000403E000080000000060
-:10FA60008F8300409382002C30C600FF30A500FF3A
-:10FA700000431023304300FF8F8200240080382190
-:10FA80000043102114C0000224480088008338215C
-:10FA900030E200031440000530A2000314400003CC
-:10FAA000306200031040000D0000000010A00009AB
-:10FAB000000020212482000190E30000304400FF78
-:10FAC0000085102BA103000024E700011440FFF97A
-:10FAD0002508000103E000080000000010A0FFFD61
-:10FAE00000002021248200048CE30000304400FF49
-:10FAF0000085102BAD03000024E700041440FFF93B
-:10FB00002508000403E000080000000027BDFFF8FE
-:10FB10002402FFFFAFA20000008038212405002F3F
-:10FB20003C090800252971AC240800FF2406FFFFCA
-:10FB300090E2000024A3FFFF0006220200C210266C
-:10FB4000304200FF00021080004910218C4200006A
-:10FB5000306500FF24E7000114A8FFF5008230267D
-:10FB600000061027AFA20004AFA200000000282169
-:10FB700027A6000400C510239044000324A200011E
-:10FB800000BD1821304500FF2CA200041440FFF9ED
-:10FB9000A06400008FA2000003E0000827BD000859
-:10FBA0000080482130AAFFFF30C600FF30E7FFFF8A
-:10FBB000274801808F4201B80440FFFE8F82004C2D
-:10FBC000AD0200008F420124AD0200048D2200200E
-:10FBD000A5070008A102000A24020016A102000BDA
-:10FBE000934301208D2200088D240004306300FF20
-:10FBF000004310219783003E004410218D250024EE
-:10FC0000004310233C0308008C6331A08F84002440
-:10FC1000A502000C246300E82402FFFFA50A000EE1
-:10FC2000A5030010A5060012AD050018AD020024C2
-:10FC3000948201142403FFF73042FFFFAD02002835
-:10FC40008C820118AD02002C3C021000AD00003087
-:10FC5000AF4201B88D2200200043102403E00008C9
-:10FC6000AD2200208F82002430E7FFFF0080482172
-:10FC7000904200D330A5FFFF30C600FF0002110004
-:10FC800030420F0000E23825274801808F4201B83A
-:10FC90000440FFFE8F82004CAD0200008F42012421
-:10FCA000AD0200048D220020A5070008A102000A71
-:10FCB00024020017A102000B934301208D220008AB
-:10FCC0008D240004306300FF004310219783003E21
-:10FCD000004410218F840024004310233C030800BB
-:10FCE0008C6331A0A502000CA505000E246300E87A
-:10FCF000A5030010A5060012AD0000148D220024FB
-:10FD0000AD0200188C82005CAD02001C8C82005891
-:10FD1000AD0200202402FFFFAD020024948200E621
-:10FD20003042FFFFAD02002894820060948300BE41
-:10FD300030427FFF3063FFFF0002120000431021BA
-:10FD4000AD02002C3C021000AD000030AF4201B803
-:10FD5000948200BE2403FFF700A21021A48200BEFB
-:10FD60008D2200200043102403E00008AD22002073
-:10FD7000274301808F4201B80440FFFE240200188F
-:10FD8000AC640000A062000B8F820024944200E665
-:10FD9000A46200103C021000AC60003003E00008D8
-:10FDA000AF4201B8274301808F4201B80440FFFEF3
-:10FDB0008F8200289442001C3042FFFF000211C0D5
-:10FDC000AC62000024020019A062000B3C0210008B
-:10FDD000AC60003003E00008AF4201B88F8700300C
-:10FDE00030C300FF8F4201B80440FFFE8F82004CF9
-:10FDF00034636000ACA2000093820048A0A200051A
-:10FE00008CE20010A4A20006A4A300088C820020AB
-:10FE10002403FFF7A0A2000A24020002A0A2000B04
-:10FE20008CE20000ACA200108CE20004ACA2001432
-:10FE30008CE2001CACA200248CE20020ACA20028C2
-:10FE40008CE2002CACA2002C8C820024ACA2001806
-:10FE50003C021000AF4201B88C8200200043102405
-:10FE600003E00008AC8200209382004824030001D4
-:10FE700027BDFFE8004330042C420020AFB0001043
-:10FE8000AFBF00142410FFFE10400005274501807D
-:10FE90003C0208008C4231900A001598004610245C
-:10FEA0003C0208008C4231940046102414400007A4
-:10FEB000240600848F8300242410FFFF90620062D8
-:10FEC0003042000F34420040A06200620E00156410
-:10FED00000000000020010218FBF00148FB000103E
-:10FEE00003E0000827BD00188F83002827BDFFE02E
-:10FEF000AFB20018AFB10014AFB00010AFBF001C1C
-:10FF00009062000D00A0902130D100FF3042007FB0
-:10FF1000A062000D8F8500248E4300180080802190
-:10FF20008CA2007C146200052402000E90A20063E3
-:10FF3000344200200A0015C1A0A200630E001587FC
-:10FF4000A38200482403FFFF104300472404FFFF5F
-:10FF500052200045000020218E4300003C0200108A
-:10FF600000621024504000043C02000802002021DE
-:10FF70000A0015D024020015006210245040000928
-:10FF80008E45000002002021240200140E00158777
-:10FF9000A38200482403FFFF104300332404FFFF23
-:10FFA0008E4500003C02000200A210241040001602
-:10FFB0003C0200048F8600288CC200148CC3001001
-:10FFC0008CC40014004310230044102B5040000543
-:10FFD000020020218E43002C8CC20010106200030E
-:10FFE000020020210A001601240200123C02000433
-:10FFF00000A210245040001C0000202102002021FB
-:020000040001F9
-:100000000A0016012402001300A21024104000066A
-:100010008F8300288C6200105040001300002021C4
-:100020000A0015FB020020218C62001050400004E1
-:100030008E42002C020020210A0016012402001129
-:100040005040000900002021020020212402001756
-:100050000E001587A38200482403FFFF104300020F
-:100060002404FFFF000020218FBF001C8FB2001866
-:100070008FB100148FB000100080102103E0000841
-:1000800027BD00209383002C27BDFFE0240200340D
-:10009000AFB20018AFB10014AFBF001CAFB000107A
-:1000A000008088211462000C00A090218F84003011
-:1000B0000E0014B08C9000301202000724020005DC
-:1000C000022020210E001587A38200482403FFFF91
-:1000D0001043005F2404FFFF924200041040000917
-:1000E0008F820024022020212402000C0E0015879C
-:1000F000A38200482403FFFF104300552404FFFFA0
-:100100008F820024A38000208E4300048C44008052
-:100110003C0200FF3442FFFF006218240083202BC2
-:1001200010800008AF83003802202021240200192B
-:100130000E001587A38200482403FFFF10430044EC
-:100140002404FFFF9782003E8F8700408F8800388D
-:100150000047102311000039A782003E8F8600243B
-:100160003045FFFF8F84004C90C300BC3C02080068
-:100170008C4231A0000318823070000100822021DF
-:10018000001010800102102100A2282B10A00010E6
-:10019000248200888F8400301082000D3C033F01D0
-:1001A0008E420000004310243C0325001443000647
-:1001B00030E500FF8C820000ACC200888C82001009
-:1001C0000A001661ACC200980E00148500003021B0
-:1001D0008F850038938300208F86002430A200038F
-:1001E000000210233042000300433821A38700207F
-:1001F00094C400E400A228218F8300408F82004431
-:1002000034841000A4C400E400431021AF820044F1
-:100210001200000EAF85004024E20004A3820020FB
-:1002200094C200E424A30004AF83004034422000C1
-:10023000A4C200E40A001681000020218F8200443D
-:10024000AF80004000471021AF8200440000202111
-:100250008FBF001C8FB200188FB100148FB0001038
-:100260000080102103E0000827BD00208F860024B5
-:1002700027BDFFE8AFBF0014AFB0001090C200630D
-:10028000304200201040000830A500FF8CC2007CE6
-:100290002403FFDF24420001ACC2007C90C2006353
-:1002A00000431024A0C2006310A000238F83002409
-:1002B00027500180020028210E00156424060082C8
-:1002C0008F82002490420063304200405040001969
-:1002D000A38000488F8300308F4201B80440FFFEA6
-:1002E0008F82004CAE02000024026082A602000849
-:1002F00024020002A202000B8C620008AE02001071
-:100300008C62000CAE0200148C620014AE02001865
-:100310008C620018AE0200248C620024AE02002819
-:100320008C620028AE02002C3C021000AF4201B8E3
-:10033000A38000488F8300248FBF00148FB000106B
-:100340009062006327BD00183042007FA062006306
-:100350009782003E8F8600408F8500249383002C77
-:1003600000461023A782003EA4A000E490A40063EE
-:100370008F820044AF8300402403FFBF004610215A
-:1003800000832024AF820044A0A400638F82002455
-:10039000A04000BD8F82002403E00008A44000BEFE
-:1003A0008F8A002427BDFFE0AFB10014AFB000106A
-:1003B0008F880040AFBF001893890020954200E469
-:1003C00030D100FF0109182B0080802130AC00FFE4
-:1003D0003047FFFF0000582114600003310600FF82
-:1003E00001203021010958239783003E0068102B1B
-:1003F00014400032000000001468000724020001CD
-:100400008E0200202403FFFB34E780000043102409
-:10041000AE0200202402000134E7088015820005A6
-:100420003165FFFF0E0014D5020020210A001716C7
-:10043000020020210E001506020020210E001549A1
-:100440008F84004C8F840024948200602442000139
-:10045000A4820060948200603C0308008C633188B1
-:1004600030427FFF5443000F02002021948200603D
-:100470002403800000431024A48200609082006066
-:1004800090830060304200FF000211C2000210277A
-:10049000000211C03063007F00621825A083006055
-:1004A00002002021022028218FBF00188FB10014E4
-:1004B0008FB000100A00168827BD0020914200630B
-:1004C0002403FF8000431025A14200639782003E71
-:1004D0003048FFFF11000020938300208F84002408
-:1004E000004B1023304600FF948300E42402EFFF0A
-:1004F0000168282B00621824A48300E414A00003E0
-:100500008E02002001005821000030212403FFFB4F
-:1005100034E7800000431024AE02002024020001D2
-:10052000158200053165FFFF0E0014D50200202161
-:100530000A00173E9783003E0E0015060200202198
-:100540009783003E8F820040A780003E0043102327
-:10055000AF820040938300208F8200248FBF001859
-:100560008FB100148FB0001027BD002003E00008F9
-:10057000A04300BD8F82002490430088904500BDB9
-:10058000244900883063003F2463FFE02402000117
-:10059000006238042C63002030E80019A385002095
-:1005A00010600010AF8900303C028000344200022D
-:1005B00024050001240600011500000800E21824AB
-:1005C000000028211460000530E2002010400005E2
-:1005D000240500019126000130C600010A0016D54D
-:1005E0000000000003E000080000000027BDFFD865
-:1005F000AFB000108F900030AFB40020AFB1001446
-:10060000AFBF0024AFB3001CAFB200188E050010BE
-:100610003C0208008C4231B08F86003430A33FFF8B
-:100620000062182B8CD30014008088218CD200200B
-:10063000106000780000A02190C3000D2402FF800C
-:1006400000431024304200FF50400073022020215C
-:1006500000051382304200035440006F0220202125
-:1006600094C3001C8F8200248E050028A44301142B
-:100670008CC2001002621823146500072402001FB8
-:100680008F820038006210210262102B1040000897
-:100690008F830028240200180E001587A3820048CB
-:1006A0002403FFFF1043006F2404FFFF8F83002803
-:1006B0008F8400388C620010024490210044102383
-:1006C000AC6200108F820024AC7200208C42006863
-:1006D0000052102B104000098F830034022020218B
-:1006E0002402001D0E001587A38200482403FFFF8B
-:1006F0001043005C2404FFFF8F8300348E0200242B
-:100700008C63002410430007022020212402001CD7
-:100710000E001587A38200482403FFFF10430051F9
-:100720002404FFFF8F8400288C82002424420001CF
-:10073000AC820024125300048F8200248C42006893
-:100740005642000E8E0200008E0200003C03008024
-:10075000004310241440000D2402001A022020211E
-:100760000E001587A38200482403FFFF1043003DBD
-:100770002404FFFF0A0017D28E0200143C030080FD
-:1007800000431024504000038E020014AC8000206F
-:100790008E0200142412FFFF105200062402001BD8
-:1007A000022020210E001587A38200481052002D40
-:1007B0002404FFFF8E0300003C02000100621024AD
-:1007C0001040001F3C02008000621024144000080A
-:1007D000022020212402001A0E001587A38200485F
-:1007E0002403FFFF1043001F2404FFFF02202021E9
-:1007F000020028210E0015A7240600012403FFFF94
-:100800002404FFFF1443000E241400010A001807FB
-:100810008FBF0024022020212402000D8FBF00245E
-:100820008FB400208FB3001C8FB200188FB100145A
-:100830008FB0001027BD00280A001587A38200484A
-:100840008F8300280220202102803021946200360C
-:1008500024050001244200010E0016D5A4620036D2
-:10086000000020218FBF00248FB400208FB3001C14
-:100870008FB200188FB100148FB0001000801021CB
-:1008800003E0000827BD00288F83002427BDFFD880
-:10089000AFB40020AFB3001CAFB20018AFB100146A
-:1008A000AFB00010AFBF0024906200638F910030A2
-:1008B0002412FFFF3442004092250000A062006332
-:1008C0008E2200100080982130B0003F10520006A8
-:1008D0000360A0212402000D0E001587A3820048AA
-:1008E000105200522404FFFF8F8300248E22001830
-:1008F0008C63007C10430007026020212402000E5C
-:100900000E001587A38200482403FFFF1043004711
-:100910002404FFFF24040020120400048F83002419
-:100920009062006334420020A06200638F8500382B
-:1009300010A0001E00000000560400048F82002456
-:10094000026020210A0018512402000A9683000A3E
-:100950002404FFFD944200603042FFFF1043003446
-:100960008FBF00243C0208008C42318C0045102BC4
-:100970001440000602602021000028210E0016D538
-:10098000240600010A001878000020212402002D0E
-:100990000E001587A38200482403FFFF10430023A5
-:1009A0002404FFFF0A001878000020211604000527
-:1009B0008F8400248E2300142402FFFF506200184D
-:1009C000026020219482006024420001A482006021
-:1009D000948200603C0308008C63318830427FFFC2
-:1009E0005443000F026020219482006024038000A1
-:1009F00000431024A4820060908200609083006015
-:100A0000304200FF000211C200021027000211C094
-:100A10003063007F00621825A083006002602021FF
-:100A20000E00168824050001000020218FBF00243D
-:100A30008FB400208FB3001C8FB200188FB1001448
-:100A40008FB000100080102103E0000827BD0028AF
-:100A50008F83002427BDFFE8AFB00010AFBF0014A4
-:100A6000906200638F870030008080213442004014
-:100A70008CE60010A06200633C0308008C6331B078
-:100A800030C23FFF0043102B1040004E8F850034D2
-:100A90002402FF8090A3000D00431024304200FF89
-:100AA0005040004902002021000613823048000314
-:100AB00024020002550200440200202194A2001CDE
-:100AC0008F85002424030023A4A201148CE60000D7
-:100AD000000616023042003F104300103C03008322
-:100AE0008CE300188CA2007C106200062402000E29
-:100AF0000E001587A38200482403FFFF104300382F
-:100B00002404FFFF8F83002490620063344200209E
-:100B1000A06200630A0018BD8F83002800C3102460
-:100B2000144300078F83002890A200623042000F18
-:100B300034420020A0A20062A388003C8F830028DA
-:100B40009062000D3042007FA062000D8F8300385C
-:100B500010600018020020218F8400348C82001065
-:100B60000043102B1040000924020018020020212D
-:100B70000E001587A38200482403FFFF10430018CE
-:100B80002404FFFF0A0018E5000020218C820010D9
-:100B90002405000102002021004310238F83002838
-:100BA000240600010E0016D5AC6200100A0018E5FC
-:100BB000000020210E001688240500010A0018E517
-:100BC00000002021020020212402000D8FBF00140C
-:100BD0008FB0001027BD00180A001587A3820048B7
-:100BE0008FBF00148FB000100080102103E00008B8
-:100BF00027BD001827BDFFD8AFB000108F90003080
-:100C0000AFB3001CAFBF0020AFB20018AFB10014EB
-:100C10008E1200103C0308008C6331B032423FFF5B
-:100C20000043102B1040007C008098218F850034F9
-:100C30002402FF8090A3000D00431024304200FFE7
-:100C400050400076026020210012138230420003DF
-:100C500024030001544300710260202190A2000D82
-:100C600030420008544000038F8200380A001915F2
-:100C700024020024504000038E03000C0A001915C2
-:100C8000240200278CA20020146200052402002008
-:100C90008E0300088CA200241062000824020020A9
-:100CA0000E001587A38200482403FFFF1043006A4B
-:100CB0002404FFFF0A0019408F8400288E020014CC
-:100CC0002411FFFF145100038F8700240A00193BF1
-:100CD000240200258E0300188CE2007C14620016AA
-:100CE0002402000E8E0300248CA20028146200123D
-:100CF000240200218E0600288CA2002C14C2000EB3
-:100D00002402001F8E03002C1060000B240200231D
-:100D10008CE200680043102B1440000724020026D8
-:100D20008CA20014006618210043102B50400007CD
-:100D30008F840028240200220E001587A382004819
-:100D4000105100452404FFFF8F8400282403FFF77F
-:100D50009082000D00431024A082000D8F86002495
-:100D60003C0308008C6331AC8F82004C94C400E0DB
-:100D70008F8500280043102130847FFF000420402D
-:100D8000004410213043007F034320213C03000E28
-:100D9000008320212403FF8000431024AF42002C55
-:100DA000A49200008CA2002824420001ACA20028DA
-:100DB0008CA2002C8E03002C00431021ACA2002C2E
-:100DC0008E02002CACA200308E020014ACA20034C3
-:100DD00094A2003A24420001A4A2003A94C600E082
-:100DE0003C0208008C4231B024C4000130837FFFF4
-:100DF000146200130080302124028000008230241D
-:100E000030C2FFFF000213C2304200FF0002102771
-:100E10000A00197D000233C0026020212402000D67
-:100E20008FBF00208FB3001C8FB200188FB1001449
-:100E30008FB0001027BD00280A001587A382004844
-:100E40008F82002402602021240500010E001688F4
-:100E5000A44600E0000020218FBF00208FB3001CBB
-:100E60008FB200188FB100148FB0001000801021D5
-:100E700003E0000827BD002827BDFFE0AFB1001444
-:100E80008F910030AFB00010AFBF00188E26001059
-:100E90003C0308008C6331B030C23FFF0043102B8D
-:100EA0001040005E008080218F8500342402FF8086
-:100EB00090A3000D00431024304200FF5040005822
-:100EC000020020218F8200381040000800061382A3
-:100ED0008F8200249763000A2404FFFD944200607F
-:100EE0003042FFFF104300550006138230420003DA
-:100EF0001440000E00000000922200021040000585
-:100F00008E23002450600015922300030A0019B6B6
-:100F1000020020218CA200245062001092230003C2
-:100F2000020020210A0019BE2402000F90A2000D29
-:100F3000304200085440000992230003020020219F
-:100F4000240200100E001587A38200482403FFFF2F
-:100F50001043003A2404FFFF9223000324020002FE
-:100F60005462000C922200038F8200385440000922
-:100F700092220003020020212402002C0E0015877B
-:100F8000A38200482403FFFF1043002C2404FFFF2A
-:100F9000922200030220282102002021384600105E
-:100FA0002CC600012C4200010E0015A7004630257A
-:100FB0002411FFFF105100212404FFFF8F8300380C
-:100FC00010600012020020213C0208008C42318C8B
-:100FD0000043102B144000060000000000002821F0
-:100FE0000E0016D5240600010A0019FC000020217D
-:100FF0002402002D0E001587A38200481051000F17
-:101000002404FFFF0A0019FC000020210E001688AE
-:10101000240500010A0019FC000020210200202103
-:101020002402000D8FBF00188FB100148FB0001084
-:1010300027BD00200A001587A38200488FBF001833
-:101040008FB100148FB000100080102103E0000861
-:1010500027BD00209383003C27BDFFE0240200024F
-:10106000AFB10014AFB0001000808821AFBF0018EE
-:10107000000080211062008C2404FFFD9785003E53
-:101080008F83004030A2FFFF0043102B5440007DAF
-:101090008F8400440E001448000000003C02080049
-:1010A000244275AC02202021004028210E00160E9B
-:1010B000AF8200302409FFFF1049007B2404FFFFAA
-:1010C0003C0808008D0875BC3C0208008C4231B019
-:1010D0003C030800906375AC31043FFF0082102B85
-:1010E0001040001B3067003F3C0208008C4231A8D2
-:1010F0008F83004C000421800062182100641821B5
-:101100003062007F034228213C02000C00A228210B
-:101110003C020080344200013066007800C2302575
-:101120002402FF8000621024AF42002830640007D0
-:10113000AF4208048F820024034420212484094004
-:10114000AF460814AF850028AF840034AC430118C3
-:101150009383003C240200031462003B240200013C
-:101160002402002610E2003D28E200271040001370
-:10117000240200322402002210E2003828E2002378
-:1011800010400008240200242402002010E2002461
-:101190002402002110E2001E022020210A001A7BF6
-:1011A0002402000B10E2002D2402002510E20010A2
-:1011B000022020210A001A7B2402000B10E2001AF0
-:1011C00028E20033104000062402003F24020031D0
-:1011D00010E2000B022020210A001A7B2402000BDF
-:1011E00010E20011022020210A001A7B2402000BC9
-:1011F0000E001768022020210A001A960040802164
-:101200000E0018EA022020210A001A9600408021D0
-:101210000E00198B022020210A001A96004080211E
-:101220001509000E000000000E00180F02202021FA
-:101230000A001A96004080210E001587A3820048FC
-:101240000A001A9600408021146200170200202133
-:101250002402002314E200052402000B0E00188172
-:10126000022020210A001A9600408021022020211D
-:10127000A38200480E0015872410FFFF0A001A976A
-:101280000200202130A500FF0E0014852406000175
-:101290009783003E8F820040A780003E00431023CA
-:1012A000AF820040020020218FBF00188FB10014D0
-:1012B0008FB000100080102103E0000827BD00203F
-:1012C00027BDFFE0AFB10014AFBF0018AFB00010F2
-:1012D0008F4601283C0308008C6331A02402FF8064
-:1012E000AF86004C00C318213065007F03452821DC
-:1012F000006218243C02000AAF43002400A2282107
-:1013000090A2006200808821AF850024304200FF57
-:1013100000021102A382003C90A200BC30420002F5
-:101320001440000224030034240300308F82002480
-:10133000A383002C9383003C8C4200C0A380004810
-:10134000AF82004024020004106200308F8400400D
-:101350008E2400045080002D8F8400408E220010C7
-:101360003083FFFFA784003E1060001FAF8200445F
-:101370008F8300242405FF800220202190620063D7
-:1013800000A21024304200FF1440000D00000000B5
-:101390000E001A029790003E1040001000401821E5
-:1013A0002402FFFD546200118E2300200200282138
-:1013B0000E001426022020210A001AE88E230020A5
-:1013C0009062006300A21024304200FF104000032E
-:1013D000022020210E00174A000000009782003EE4
-:1013E0001440FFE48F8300248E2300203062000429
-:1013F000104000068F8400402402FFFB006210248E
-:101400000E00143AAE2200208F8400408F83002407
-:101410008FBF00188FB100148FB00010240200019C
-:1014200027BD002003E00008AC6400C030A500FF29
-:101430002403000124A900010069102B1040000CB6
-:1014400000004021240A000100A31023004A3804B0
-:1014500024630001308200010069302B104000023B
-:10146000000420420107402554C0FFF800A31023C8
-:1014700003E000080100102127BDFFE03C021EDC54
-:10148000AFB20018AFB10014AFBF001CAFB0001076
-:1014900034526F4100008821240500080E001AF81C
-:1014A00002202021001180803C07080024E771AC55
-:1014B0000002160002071821AC620000000028217B
-:1014C00024A200013045FFFF8C6200002CA600081A
-:1014D00004410002000220400092202614C0FFF8C0
-:1014E000AC640000020780218E0400000E001AF890
-:1014F00024050020262300013071FFFF2E23010068
-:101500001460FFE5AE0200008FBF001C8FB2001810
-:101510008FB100148FB0001003E0000827BD002039
-:101520003C02080024426A743C010800AC2271A00D
-:101530003C02080024424FF03C010800AC2271A498
-:10154000240200063C010800A02271A80A001B0B1F
-:101550000000000027BDFFD8AFB3001CAFB20018D9
-:10156000AFBF0020AFB10014AFB000108F510140E9
-:101570008F48014800089402324300FF311300FFF6
-:101580008F4201B80440FFFE27500180AE110000D9
-:101590008F420144AE02000424020002A612000899
-:1015A000A202000B24020014AE13002410620025D6
-:1015B00028620015104000082402001524020010C3
-:1015C0001062003024020012106200098FBF002058
-:1015D0000A001C358FB3001C106200702402002228
-:1015E000106200378FBF00200A001C358FB3001C2B
-:1015F0003C0208008C4231A02403FF80022210210B
-:1016000000431024AF4200243C0208008C4231A069
-:10161000022210213042007F034218213C02000ABE
-:1016200000621821166000BCAF8300249062006243
-:101630003042000F34420030A06200620A001C34C5
-:101640008FBF00203C0460008C832C083C02F00318
-:101650003442FFFF00621824AC832C083C020800CF
-:101660008C4231A08C832C0824420074000210822A
-:101670000002148000621825AC832C080A001C3478
-:101680008FBF00203C0208008C4231A02403FF8061
-:101690000222102100431024AF4200243C02080023
-:1016A0008C4231A03C03000A022210213042007F0C
-:1016B00003421021004310210A001C33AF82002492
-:1016C0003C0208008C4231A02405FF800222102138
-:1016D00000451024AF4200243C0208008C4231A097
-:1016E000022210213042007F034218213C02000AEE
-:1016F000006218219062006300A21024304200FFB3
-:1017000010400085AF8300242462008894430012B7
-:101710003C0208008C4231A830633FFF000319806F
-:1017200002221021004310213043007F0343202177
-:10173000004510243C03000C00832021AF42002808
-:101740009082000D00A21024304200FF1040007271
-:10175000AF8400289082000D304200101440006FCA
-:101760008FBF00200E001556000000008F4201B808
-:101770000440FFFE00000000AE1100008F42014453
-:10178000AE02000424020002A6120008A202000B0E
-:10179000AE1300240A001C348FBF00202406FF80F3
-:1017A00002261024AF4200203C0208008C4231A0E7
-:1017B00031043FFF00042180022210210046102442
-:1017C000AF4200243C0308008C6331A83C020800AF
-:1017D0008C4231A03227007F0223182102221021DF
-:1017E000006418213042007F3064007F03422821CA
-:1017F0003C02000A0066182400A22821034420218C
-:101800003C02000C00822021AF4300283C0200086B
-:101810000347182100629021AF850024AF8400287F
-:101820000E001556010080218F4201B80440FFFED2
-:101830008F8200288F840024274501809042000D6C
-:10184000ACB10000A4B000060002160000021603AE
-:1018500000021027000237C214C00016248200883C
-:101860009442001232033FFF30423FFF1443001204
-:1018700024026082908300632402FF8000431024CE
-:10188000304200FF5040000C2402608290820062CF
-:101890003042000F34420040A08200622402608483
-:1018A000A4A200082402000DA0A200050A001C1E2C
-:1018B0003C02270024026082A4A20008A0A0000528
-:1018C0003C02270000061C000062182524020002CA
-:1018D000A0A2000BACA30010ACA00014ACA000248C
-:1018E000ACA00028ACA0002C8E42004C8F840028B5
-:1018F000ACA200189083000D2402FF800043102446
-:10190000304200FF104000058FBF00209082000D84
-:101910003042007FA082000D8FBF00208FB3001CDB
-:101920008FB200188FB100148FB000103C0210006D
-:0C19300027BD002803E00008AF4201B80A
-:04193C00080033F874
-:10194000080033F808003370080033A8080033DCBF
-:10195000080034000800340008003400080032E0B9
-:101960000A00012200000000000000000000000D3D
-:10197000747061352E302E306A330000050000018E
-:101980000000000000000000000000000000000057
-:101990000000000000000000000000000000000047
-:1019A0000000000000000000000000000000000037
-:1019B0000000000000000000000000000000000027
-:1019C0000000000000000000000000000000000017
-:1019D0000000000000000000000000000000000007
-:1019E00000000000000000000000000010000003E4
-:1019F000000000000000000D0000000D3C02080087
-:101A000024421B803C03080024632014AC400000E7
-:101A10000043202B1480FFFD244200043C1D0800DD
-:101A200037BD2FFC03A0F0213C10080026100488CD
-:101A30003C1C0800279C1B800E00015A000000007F
-:101A40000000000D3084FFFF308200078F850018F2
-:101A500010400002248300073064FFF80085302125
-:101A600030C41FFF03441821247B4000AF85001CB5
-:101A7000AF84001803E00008AF4400843084FFFF07
-:101A8000308200078F8500208F86002810400002DA
-:101A9000248300073064FFF8008520210086182B7E
-:101AA00014600002AF85002400862023034428210F
-:101AB00034068000AF840020AF44008000A62021BF
-:101AC00003E00008AF84003827BDFFD8AFB3001C87
-:101AD000AFB20018AFB00010AFBF0024AFB4002009
-:101AE000AFB100143C0860088D1450002418FF7F2B
-:101AF0003C1A8000029898243672380CAD125000BF
-:101B00008F5100083C07601C3C0860003630000123
-:101B1000AF500008AF800018AF400080AF40008495
-:101B20008CE600088D0F08083C0760168CEC00005E
-:101B300031EEFFF039CA00103C0DFFFF340B80007E
-:101B40003C030080034B48212D440001018D2824D3
-:101B50003C0253533C010800AC230420AF890038F9
-:101B6000AF860028AF840010275B400014A200035A
-:101B700034E37C008CF90004032818218C7F007C5E
-:101B80008C6500783C02800034520070AF85003CC8
-:101B9000AF9F00403C13080026731BC40240A021E5
-:101BA0008E4800008F46000038C3000130640001F9
-:101BB00010800017AF880034028048218D2D00006E
-:101BC0003C1908008F39045C3C1108008E31045820
-:101BD00001A8F823033F7821000040210228382182
-:101BE00001FF802B00F070213C010800AC2F045C49
-:101BF0003C010800AC2E04588F4C0000398B0001CA
-:101C0000316A00011540FFED01A04021AF8D003485
-:101C10008E4E00003C0C08008D8C045C3C0A0800D1
-:101C20008D4A045801C86823018D282100005821DD
-:101C300000AD302B014B2021008610213C01080013
-:101C4000AC25045C3C010800AC2204588F45010817
-:101C50008F44010030A92000AF850000AF84000C44
-:101C60001120000A00A030213C0708008CE7042C5A
-:101C700024EF00013C010800AC2F042C3C10400074
-:101C8000AF5001380A0001900000000030B002009F
-:101C90001600001424110F001091001224070D00EB
-:101CA0001087023330B000065200FFF53C104000B0
-:101CB000936D0000240C001031A600F010CC0269D6
-:101CC000240E007010CE02DD8F8B001425670001FA
-:101CD000AF8700143C104000AF5001380A0001905B
-:101CE00000000000974801041100FFE53C1040008F
-:101CF00030B84000170000A2000000008F590178A2
-:101D00000720FFFE8F8700382409000824050800FB
-:101D10008CE30008AF450178A7490140A740014284
-:101D2000974201048F8600003049FFFF30DF000139
-:101D300013E002D5012040212524FFFE240A0002E1
-:101D4000A74A01463088FFFFA74401483C0B080022
-:101D50008D6B043C156002C48F8F000C30C30020D3
-:101D600014600002240400092404000130CD0C009A
-:101D7000240C040051AC000134840004A744014A3F
-:101D80003C0508008CA504203C0200483C190001D9
-:101D900000A2F82530D8000203F92825130000041A
-:101DA000000018213C04010000A4282524030001A0
-:101DB00030CA000451400005AF8300083C06001003
-:101DC00000A6282524030001AF830008AF451000BA
-:101DD0000000000000000000000000000000000003
-:101DE0008F83000810600023000000008F4B10005C
-:101DF0000561FFFE000000001060001E00000000F2
-:101E00008F4D10003C03002001A3602411800019B5
-:101E10008F8F000031EE000211C00016000000009C
-:101E2000975010141600001300000000974510088A
-:101E300030BFFFFF27F800060018C8820019308065
-:101E400000C72821331100013303000312200320AF
-:101E50008CA200000000000D00C7F821AFE20000D6
-:101E60003C1908008F390430272600013C01080086
-:101E7000AC2604308F6A00003405FFFFAF8A0004EF
-:101E80008CE200001045029A000020218CE5000041
-:101E900030BF010013E0027E010020213C07080052
-:101EA0008CE704743C1008008E10044C00E85821A4
-:101EB0003C1808008F1804700168882B3C08080043
-:101EC0008D0804480000782102046021030F1821C6
-:101ED0000184702B010F68210071502101AE102187
-:101EE0003C010800AC2C044C3C010800AC22044826
-:101EF0003C010800AC2B04743C010800AC2A0470BF
-:101F00008F8D0018012030213129000725AE0008EF
-:101F100031C21FFF03426021AF8D001CAF82001849
-:101F2000259B4000AF420084112000038F900020C9
-:101F300024C800073106FFF88F84002800D028212C
-:101F400000A4782B15E00002AF90002400A4282301
-:101F50000345202134038000008310213C0610003B
-:101F6000AF850020AF820038AF450080AF460178D2
-:101F70008F8B0014256700010A0001DDAF87001474
-:101F80008F6200088F670000241100300007C6022E
-:101F9000330300F0107100A2241900401479FF4BA4
-:101FA0008F8B00148F4A01780540FFFE30A7020096
-:101FB00014E00003000512820000000D00051282EB
-:101FC000305000030010490001307021000E68807D
-:101FD00001B06021000C5880017380218E08000040
-:101FE00015000002000000000000000D8F6F0004CB
-:101FF00005E202B19203000692070005920F000469
-:102000003C0200010007288000B060218D89001883
-:102010002771000825EE000501226821000E30829C
-:10202000AD8D0018022020210E0005802605001429
-:10203000920B00068F7F00043C087FFF000B20807E
-:10204000009130218CC30004350AFFFF03EAC82445
-:102050000079C021ACD80004920700059209000461
-:10206000960D00080007288000B1F8218FEF0000CE
-:10207000974201043C07FFFF01E75024304EFFFF69
-:1020800001C96021018D58233168FFFF01482025D7
-:10209000AFE40000920300072419000110790269DF
-:1020A0002406000310660279000000008E1900105B
-:1020B000241F000AA75F0140A759014292030004B0
-:1020C0008F86000024070001A7430144A740014672
-:1020D0009758010430D100023C050041A75801483F
-:1020E00000001821A747014A1220000330CA00044B
-:1020F0003C0501412403000151400005AF83000865
-:102100003C08001000A8282524030001AF83000824
-:10211000AF451000000000000000000000000000BB
-:10212000000000008F8B0008116000040000000018
-:102130008F4410000481FFFE000000008F6A000041
-:10214000920700043C0508008CA50444AF8A0004F3
-:10215000975F01043C0F08008DEF044030E300FF5F
-:1021600033F9FFFF0079C02100B868210000102179
-:1021700024E6000A30C8FFFF01B8482B01E27021B5
-:1021800001C96021311000073C010800AC2D044456
-:102190003C010800AC2C0440120000038F8D001895
-:1021A000250B00073168FFF8010D702131CC1FFFAE
-:1021B000AF8D001CAF8C0018AF4C00849744010415
-:1021C000034C80213084FFFF30880007110000039A
-:1021D000261B4000248900073124FFF88F8200204D
-:1021E0008F850028008220210085782B15E00002D1
-:1021F000AF82002400852023034488213405800019
-:10220000022510213C061000AF840020AF82003868
-:10221000AF440080AF4601780A0002858F8B00141E
-:102220008F5F017807E0FFFE30AA0200154000032F
-:10223000000542820000000D0005428231020003C9
-:102240000002710001C26821000D608001824821F6
-:102250000009288000B380218E0B0000116000026D
-:10226000000000000000000D8F6F000C05E001F37E
-:102270008F87003824190001AE1900008CE3000894
-:10228000A20000078F78000400181C02306600FFCF
-:1022900024D10005001130822CC4004114800002BA
-:1022A000A20300040000000D8F6B00043C0EFFFF32
-:1022B00000E028213164FFFF248F000B000F4082D3
-:1022C00000081080004748218D2D000026040014CE
-:1022D000A60B000801AE60240E000580AD2C0000A6
-:1022E0008F5F01083C0A100003EA382410E001A3C4
-:1022F00000000000974601049203000724D1FFEC80
-:10230000346500023224FFFFA2050007960600088C
-:102310002CC7001354E0000592030007920A00073F
-:10232000355F0001A21F000792030007240B000184
-:10233000106B01BA24090003106901CD8F880038A1
-:1023400030CFFFFF25E400020004C883333F00FFC5
-:10235000001F2880A219000500A858218D780000D0
-:10236000975101043C03FFFF030360243222FFFF67
-:10237000004F702325CDFFFE018D4825AD6900007B
-:10238000920600053C02FFF6344EFFFF30CA00FF04
-:10239000000A388000F02021909900143C1FFF7F34
-:1023A00037E7FFFF3323000F0066782131F800FF85
-:1023B0000018288000B088218E2D002000A8602100
-:1023C000A20F000601AE4824AE0D000CAD89000C32
-:1023D000920B00068E04000C0127F824000B50809D
-:1023E0000150C821972600260148C02100874024BB
-:1023F000AF260024AE08000CAF3F0020AF0600104F
-:102400008F860000240C001024090002A74C014014
-:10241000A7400142A7400144A7490146974B010448
-:102420002407000130C80002256AFFFEA74A0148C0
-:102430003C050009A747014A1100000300001821CC
-:102440003C0501092403000130CD000451A0000522
-:10245000AF8300083C06001000A6282524030001D5
-:10246000AF830008AF45100000000000000000002E
-:102470000000000000000000921800042711000274
-:10248000322F0007000F1023304E0007AE0E001051
-:102490008F90000812000004000000008F4310001D
-:1024A0000461FFFE000000008F7800008F8F00188D
-:1024B0003C1008008E100444AF98000497510104AA
-:1024C00025E6001030CA1FFF3222FFFFAF8F001C2D
-:1024D000AF8A0018AF4A00842449FFFE3C0B080075
-:1024E0008D6B0440974E010401206821000967C3E9
-:1024F000020D282131C9FFFF00AD402B016C3821AE
-:1025000000E82021034AF821313900073C01080086
-:10251000AC2504443C010800AC2404401320000313
-:1025200027FB4000252300073069FFF88F9F00201C
-:102530008F840028013F382100E4C82B17200002B7
-:10254000AF9F002400E43823034720213405800096
-:10255000008510213C061000AF870020AF820038B4
-:10256000AF470080AF4601780A0002858F8B0014C8
-:10257000975801041300FDC23C1040008F430178BE
-:102580000460FFFE30B94000132000033C04000843
-:102590000000000D3C040008AF440140240808007E
-:1025A000AF4801788F8B0000974A0104317F00010A
-:1025B00013E000E93146FFFF24D0FFFE240C0002A7
-:1025C000A74C0146A75001488F8F00182405000D25
-:1025D000A745014A8F71000025E2000830491FFF1E
-:1025E0000349702130CD0007AF910004AF8F001C6C
-:1025F000AF89001800C03821AF49008411A0000342
-:1026000025DB400024C6000730C7FFF88F98002064
-:102610008F84002800F8302100C4382B14E0000219
-:10262000AF98002400C430238F8A00140346582139
-:10263000340880000168F821255900013C0310008E
-:102640003C104000AF860020AF9F0038AF460080AE
-:10265000AF430178AF990014AF5001380A000190E0
-:10266000000000008F690000974401043127FFFF3C
-:102670003088FFFF8F4F017805E0FFFE30FF000735
-:10268000001F18233078000724E6FFFE2419000AF3
-:10269000A7590140A7580142A7460144A740014657
-:1026A000A74801488F42010830510020162000023F
-:1026B000240300092403000130AA0002A743014AB1
-:1026C0003C04004111400003000018213C0401417A
-:1026D0002403000130AB000451600005AF83000803
-:1026E0003C0500100085202524030001AF8300086D
-:1026F000AF441000000000000000000000000000D7
-:10270000000000008F90000812000004000000008C
-:102710008F4C10000581FFFE000000008F78000044
-:10272000276200088F8D003CAF9800049446000893
-:102730009451000A944F000C30CEFFFF001124008A
-:1027400031E9FFFF11CD00A2008920253C030800DC
-:102750008C6304443C1808008F18044000E85021A2
-:10276000255FFFFE007F78210000102101FF302B44
-:1027700003028821022648213C010800AC2F0444B2
-:102780003C010800AC29044024EB00083162FFFF43
-:102790003047000710E000038F8500182450000721
-:1027A0003202FFF83106FFFF30C8000700457021F4
-:1027B00031CD1FFF034D6021AF85001CAF8D001888
-:1027C000259B4000AF4D0084110000038F8F002037
-:1027D00024C400073086FFF88F84002800CF28210A
-:1027E00000A4482B15200002AF8F002400A428234A
-:1027F000AF850020AF4500803C1108008E310434C5
-:102800000345C0213402800003023021122000055C
-:10281000AF860038938300172419000E1079000D3D
-:10282000241F043F3C0A1000AF4A01788F8B00142C
-:10283000256700010A0001DDAF8700140E0005A620
-:102840003C1040008F8B0014256700010A0001DE58
-:10285000AF8700143C0A1000A75F0148AF4A017817
-:102860000A0004B48F8B0014240E0F0011EE003DFB
-:1028700030D10020162000022403000924030001A7
-:102880000A000208A743014A0A0001FBA7400146CB
-:1028900094E5000894E2000A94EB000C8F86003C5B
-:1028A0000002FC00316AFFFF30B9FFFF132600373A
-:1028B00003EA20253C0508008CA504443C1F0800C1
-:1028C0008FFF04400000502100A8382100E8302B81
-:1028D00003EAC8210326C0213C010800AC270444B8
-:1028E0003C010800AC3804400A0002698F8D0018D2
-:1028F0003C1908008F39047C3C0308008C630454A5
-:102900003C0608008CC604783C0F08008DEF04508C
-:10291000032838210068682100E8C02B00C4882102
-:1029200001A8402B01E470210238582101C8602120
-:102930003C010800AC2D04543C010800AC2C0450B0
-:102940003C010800AC27047C3C010800AC2B047857
-:102950000A0002698F8D0018A74001460A00041B77
-:102960008F8F001830D000201600FFC52403000D03
-:10297000240300050A000208A743014A97590104ED
-:102980002738FFF00A00036B3304FFFF8F8C0040F1
-:10299000148CFFC8000080213C1108008E31046CAB
-:1029A0003C0408008C8404680228702101C8782B3C
-:1029B00000904021010F68213C010800AC2E046CFE
-:1029C0003C010800AC2D04680A0002698F8D0018D4
-:1029D0008F9900401499FF5D000060213C050800BC
-:1029E0008CA5046C3C1008008E10046800E82021BF
-:1029F000248EFFFE00AEF82103EE582B020C50216E
-:102A0000014B18213C010800AC3F046C3C0108005C
-:102A1000AC2304680A00048B24EB00088F8800387C
-:102A20003C02FFFF8D0E000C01C2682401A460254A
-:102A3000AD0C000C0A00037930CFFFFF0A0003A998
-:102A4000AE000000974B0104920400048E2A000C93
-:102A500001644021251FFFF20147182433F9FFFFCD
-:102A60000079C025AE38000C0A0002D48E1900107F
-:102A70003C03FFFF8D1100100223282400A47825B9
-:102A8000AD0F00100A00037930CFFFFF9745010416
-:102A9000920600048E2F001000A610212449FFEE9C
-:102AA00001E76824312EFFFF01AE6025AE2C001037
-:102AB0000A0002D48E1900108E06000CAE00000031
-:102AC0000003C080031088210A0002A6AE26002061
-:102AD0001460000D3050FFFF3C04FFFF00446024F1
-:102AE00001846826000D582B000C502B014B10243C
-:102AF00010400002000000000000000D8CA3000048
-:102B00000A00023E006410253A11FFFF0011782BE5
-:102B10000010702B01CF2024108000020000000064
-:102B20000000000D8CB800000A00023E3702FFFFD3
-:102B30003084FFFF30A5FFFF108000070000182140
-:102B4000308200011040000200042042006518217C
-:102B50001480FFFB0005284003E0000800601021FE
-:102B600010C00007000000008CA2000024C6FFFF78
-:102B700024A50004AC82000014C0FFFB24840004E0
-:102B800003E000080000000010A0000824A3FFFFDD
-:102B9000AC86000000000000000000002402FFFFDF
-:102BA0002463FFFF1462FFFA2484000403E000089A
-:102BB00000000000308EFFFF30D8FFFF00057C00D2
-:102BC00001F8602539CDFFFF01AC5021014C582B95
-:102BD000014B4821000944023127FFFF00E8302162
-:102BE0000006240230C5FFFF00A418213862FFFF51
-:102BF00003E000083042FFFF3C0C08008D8C048489
-:102C0000240BFF8027BDFFD001845021014B4824B5
-:102C1000AF4900203C0808008D080484AFB20020B2
-:102C2000AFB00018AFBF0028AFB30024AFB1001C95
-:102C3000936600040104382130E4007F009A1021DB
-:102C40003C0300080043902130C500200360802130
-:102C50003C080111277B000814A0000226460070E2
-:102C60002646006C9213000497510104920F000451
-:102C70003267000F322EFFFF31ED004001C72823DD
-:102C800011A0000500004821925900BC333800040F
-:102C90001700009000000000924300BC307F000449
-:102CA00013E0000F0000000010A0000D0000000065
-:102CB000960E0002240AFF8000A7602125CDFFFEAA
-:102CC000A74D1016920B0004014B2024308200FF08
-:102CD00010400085010C40253C0F0400010F4025E9
-:102CE0008F5301780660FFFE2404000AA7440140C8
-:102CF000960D00022404000931AC0007000C582393
-:102D0000316A0007A74A0142960200022443FFFEEF
-:102D1000A7430144A7400146975F0104A75F01480C
-:102D20008F590108333800205300000124040001AA
-:102D3000920F000431EE001015C000023483001021
-:102D400000801821A743014A000000000000000095
-:102D50000000000000000000AF481000000000006C
-:102D60000000000000000000000000008F51100073
-:102D70000621FFFE3113FFFF126000030000000078
-:102D80008F481018ACC8000096030006307FFFFF84
-:102D900027F900020019988200138880023B302135
-:102DA0008CD800001520005700183402920300044C
-:102DB0002405FF8000A3F82433F100FF1220002C2B
-:102DC00000000000924700BC30F2000212400028D0
-:102DD00000000000974B100C2562FFFEA742101662
-:102DE000000000003C0A040035490030AF491000E3
-:102DF00000000000000000000000000000000000D3
-:102E00008F4C10000581FFFE000000009749100C58
-:102E10008F51101C00C020213127FFFF24F2003009
-:102E2000001218820003288000BBF8213226FFFF21
-:102E3000AFF100000E00059500112C020013C880B0
-:102E4000033B98218E78000000027400AFB8001098
-:102E50008FA80010310FFFFFAFAF00108FA400103C
-:102E600001C46825AFAD00108FA60010AE6600004B
-:102E700097730008976D000A9766000C8F8A003CD4
-:102E8000000D5C0030CCFFFF3262FFFF104A0036BD
-:102E9000016C2025960600023C10100024D3000887
-:102EA0000E0001393264FFFF974C01040E00014708
-:102EB0003184FFFFAF5001788FBF00288FB300240B
-:102EC0008FB200208FB1001C8FB0001803E0000803
-:102ED00027BD003010A0FF700000000024A5FFFCFB
-:102EE0000A0005CE240900048CD10000AF5110184F
-:102EF0008F5301780660FF7A2404000A0A0005E374
-:102F00000000000000A7C8218F8800388F4E101CD9
-:102F10000019C0820018788001E82021AC8E0000E2
-:102F2000000E2C0200C020210E00059531C6FFFFC7
-:102F3000023B28218CAD00000002540000403021EB
-:102F4000AFAD00108FAC0010318BFFFFAFAB0010A6
-:102F50008FA2001001424825AFA900108FA70010D2
-:102F60000A000613ACA700008F8F0040148FFFC922
-:102F70000000000097420104960B00023C05080087
-:102F80008CA5046C3049FFFF316AFFFF3C1108003B
-:102F90008E310468012A382124F2FFFE00B240215C
-:102FA0000012FFC30112C82B023FC02103192021C8
-:102FB0003C010800AC28046C3C010800AC24046807
-:102FC0000A00064D0000000000A4102B104000096C
-:102FD000240300010005284000A4102B04A00003D6
-:102FE000000318405440FFFC000528401060000713
-:102FF000000000000085302B14C0000200031842BE
-:10300000008520231460FFFB0005284203E0000830
-:10301000008010218F85002C27BDFFE80005302798
-:103020002CC300012CA400020083102510400003D3
-:10303000AFBF00102405007FAF85002C00052827B6
-:1030400030A5FFFF0E000574240426F58F830030A1
-:10305000240402BD004030210083382B10E0000919
-:1030600024050001000420400083102B048000038D
-:10307000000528405440FFFC0004204010A0000838
-:1030800000C350210064402B1500000200052842B7
-:103090000064182314A0FFFB0004204200C3502149
-:1030A0008FBF0010000A4C02312200FF27BD00181C
-:0C30B000AF8A002C03E00008AF8900305C
-:0430BC000A00002ADC
-:1030C00000000000000000000000000D7478703562
-:1030D0002E302E306A330000050000000000000A88
-:1030E000000001360000EA6000000000000000005F
-:1030F00000000000000000000000000000000000D0
-:1031000000000000000000000000000000000000BF
-:103110000000000000000000000000000000001699
-:10312000000000000000000000000000000000009F
-:10313000000000000000000000000000000000008F
-:10314000000000000000000000000000000000007F
-:10315000000000000000138800000000000005DCF3
-:10316000000000000000000010000003000000004C
-:103170000000000D0000000D3C02080024423B60EE
-:103180003C03080024633D14AC4000000043202BA6
-:103190001480FFFD244200043C1D080037BD7FFC65
-:1031A00003A0F0213C100800261000A83C1C0800D9
-:1031B000279C3B600E0002BA000000000000000DDA
-:1031C0008F8300383C088000350700708CE50000D4
-:1031D000008330253C02900000C22025AF850030DE
-:1031E000AF4400208F4900200520FFFE3C038000F3
-:1031F000346200708C4500008F8600303C19080056
-:103200008F39007C3C0E08008DCE007800A620236C
-:1032100003245821000078210164682B01CF60212C
-:10322000018D50213C010800AC2B007C3C010800C2
-:10323000AC2A007803E00008000000000A0000410A
-:10324000240400018F8400383C05800034A2000172
-:103250000082182503E00008AF43002003E00008C7
-:10326000000010213084FFFF30A5FFFF1080000711
-:1032700000001821308200011040000200042042AA
-:10328000006518211480FFFB0005284003E00008BA
-:103290000060102110C00007000000008CA2000098
-:1032A00024C6FFFF24A50004AC82000014C0FFFB6D
-:1032B0002484000403E000080000000010A00008BF
-:1032C00024A3FFFFAC860000000000000000000007
-:1032D0002402FFFF2463FFFF1462FFFA248400042A
-:1032E00003E0000800000000308AFFFF93A80013ED
-:1032F000A74A014497490E1630C600FF3C02100051
-:10330000A7490146AF450148A3460152A748015AC3
-:10331000AF4701608FA400188FA30014A744015881
-:10332000AF43015403E00008AF42017803E0000816
-:10333000000000003C038000346200708C490000F3
-:103340008F8800002484000727BDFFF83084FFF831
-:10335000AF890030974D008A31ACFFFFAFAC000061
-:103360008FAB0000016850232547FFFF30E61FFFA9
-:1033700000C4282B14A0FFF73C0C8000358B007094
-:103380008D6A00003C0708008CE700843C060800BA
-:103390008CC6008000081082014918230002788042
-:1033A00000E370210000202101C3C82B00C4C0210C
-:1033B00001FA4021031948212502400027BD0008D9
-:1033C0003C010800AC2E00843C010800AC290080C0
-:1033D00003E00008000000008F8200002486000740
-:1033E00030C5FFF800A2182130641FFF03E0000879
-:1033F000AF8400008F8700388F8A004027BDFFB858
-:103400008F860044AFB60040AFBF0044AFB5003C6C
-:10341000AFB40038AFB30034AFB20030AFB1002C5E
-:10342000AFB000288F4501048D4900ACAF47008044
-:103430008CC8002000A938230000B021AF480E102E
-:103440008F440E1000004821AF440E148CC200249B
-:10345000AF420E188F430E18AF430E1C10E001252B
-:103460002D230001936B0008116000D400000000C0
-:10347000976E001031CDFFFF00ED602B158000CF5F
-:103480000000000097700010320FFFFFAF4F0E00DA
-:103490008F520000325100081220FFFD0000000092
-:1034A00097540E088F460E043285FFFF30B300019B
-:1034B00012600132000000000000000D30B8A04092
-:1034C00024150040131500C030A9A0001120012DC3
-:1034D00000000000937F000813E0000800000000D7
-:1034E00097630010306BFFFF00CB402B11000003EF
-:1034F00030AC00401180012300000000A785003C93
-:10350000AF8600349366000800E02821AFA70020B2
-:1035100014C0012427B30020AF60000C9782003C48
-:103520003047400014E00002240300162403000E7C
-:1035300024194007A363000AAF790014938A003E60
-:103540008F740014315800070018AA400295902586
-:10355000AF7200149784003C8F70001430910010FB
-:1035600002117825AF6F0014978E003C31CD000812
-:1035700011A00147000028218F6700143C021000B1
-:103580003C0C810000E22825AF65001497460E0A26
-:103590002408000E3405FFFC30C3FFFF006C5825E3
-:1035A000AF6B0004A3680002937F000A27E90004C0
-:1035B000A369000A9786003C9363000A30CC1F0081
-:1035C000000C598301634021251F0028A37F0009B7
-:1035D00097490E0CA769001093790009272A000269
-:1035E000315800070018A82332B10007A371000B5F
-:1035F00093740009976400108F910034978F003CFA
-:10360000329200FF024480210205702131ED00401A
-:1036100011A0000531C4FFFF0091282B3C1280004F
-:1036200010A000140000A0210224382B14E0011B7C
-:103630008FA500208F4D0E14AF4D0E108F420E1C23
-:10364000AF420E18AF440E008F4F000031EE00085D
-:1036500011C0FFFD0000000097540E080080882173
-:1036600000009021A794003C8F500E042414000108
-:10367000AF900034976400103095FFFF8E68000013
-:103680000111F82317E00009AE7F00008F650014D8
-:103690008F8B004434A60040AF6600148F4C0E1090
-:1036A000AD6C00208F430E18AD63002493670008B3
-:1036B00014E000D2000000000E00009E2404001060
-:1036C0008F8900483C08320000402821312600FF45
-:1036D0000006FC0003E8502525390001AF99004899
-:1036E000AC4A0000937800099370000A330400FF8D
-:1036F00000047400320F00FF01CF6825AC4D0004B8
-:103700008F820048064000EAACA20008ACA0000C82
-:103710009783003C306B00081560000226280006E5
-:1037200026280002974E0E148F450E1C8F6700044A
-:10373000936D000231C4FFFF31A200FFAFA2001061
-:103740008F6C0014AFA800180E00008BAFAC0014F3
-:10375000240400100E0000C7000000008E7200005C
-:1037600016400005000000008F6400142405FFBF10
-:1037700000859824AF7300148F79000C033538212D
-:10378000AF67000C9375000816A000080000000049
-:1037900012800006000000008F7F00143C0BEFFF3A
-:1037A0003568FFFE03E84824AF690014A3740008DD
-:1037B0008FA500200A00024602202021AF470E00FC
-:1037C0000A0000F5000000008F5901780720FFFE75
-:1037D000241F08008F840000AF5F0178974B008A98
-:1037E000316AFFFF014448232528FFFF31021FFFF4
-:1037F0002C4300081460FFF9000000008F8E004881
-:103800008F8D003800C048210344202125C60001C7
-:10381000240C0F00AF86004800E9382324864000BE
-:1038200031CA00FF11AC0005240800019391003E4D
-:103830003230000700107A4035E80001000AAC0081
-:103840003C18010002B8A025AC9440008F930048BA
-:1038500030B2003630A40008ACD3000410800097CA
-:1038600001123025974E0E0A8F8D00003C02810018
-:1038700031CCFFFF25AB0008018240253C0310003E
-:1038800031651FFF25390006241F000EAF48016077
-:1038900000C33025A75F015AAF850000A759015822
-:1038A00014E0000A8F93003824120F0052720002B5
-:1038B0002416000134C600408F580E108F94004427
-:1038C000AE9800208F550E18AE9500248F450E142B
-:1038D000AF4501448F590E1CAF590148A34A01520C
-:1038E0003C0A1000AF460154AF4A017814E0FEDDF7
-:1038F0002D2300010076A025128000178FBF004401
-:103900008F84003824160F001096008400000000F9
-:103910008F45017804A0FFFE24150F001095006E5E
-:10392000000000008F470E14240202403C1F1000CC
-:10393000AF4701448F440E1CAF440148A3400152DD
-:10394000A740015AAF400160A7400158AF4201545F
-:10395000AF5F01788FBF00448FB600408FB5003C49
-:103960008FB400388FB300348FB200308FB1002C89
-:103970008FB0002803E0000827BD004814C0FED027
-:1039800030B8A0408F420E148F84004400004821BC
-:10399000AC8200208F510E1CAC9100240A00020E54
-:1039A0002D2300018F910034978A003C3C12800047
-:1039B0000220A821315800401700FF300000A0214C
-:1039C000976900108F9200343139FFFF13320035B0
-:1039D00000002021008048211480FEA000A0382192
-:1039E0008F420E148F840044AC8200208F510E1C35
-:1039F000AC9100240A00020E2D230001936A0009F5
-:103A00009378000B315000FF330F00FF020F70213D
-:103A100025C2000A3050FFFF0E00009E0200202148
-:103A20008F8600483C1F410024CD0001AF8D004827
-:103A3000936C000930C600FF00064400318300FF8C
-:103A4000246B0002010B4825013FC825AC5900003A
-:103A50008F67000C97440E1400F22825AC45000433
-:103A60008F450E1C8F670004936A00023084FFFFAD
-:103A7000315800FFAFB800108F6F0014AFB10018BD
-:103A80000E00008BAFAF00140A0001A60200202137
-:103A9000AF6000040A00013EA36000020A00024673
-:103AA00000002021000090210A0001702414000170
-:103AB0003C1280000A000195ACB2000C8F9100000E
-:103AC00025240002A744015826300008320F1FFFAA
-:103AD0000A0001F9AF8F0000AF40014C1120002C0B
-:103AE000000000008F590E10AF5901448F430E188B
-:103AF000240200403C1F1000AF430148A340015284
-:103B0000A740015AAF400160A7400158AF4201549D
-:103B1000AF5F01780A0002278FBF00441120000622
-:103B20000000000097460E0830CC004015800002CF
-:103B3000000000000000000D8F4D017805A0FFFE81
-:103B40000000000097530E103C120500240E2000C8
-:103B5000326AFFFF0152C025AF58014C8F4F0E143F
-:103B60003C021000AF4F01448F500E1CAF50014873
-:103B7000A34001528F840038A740015AAF40016032
-:103B8000A7400158AF4E01540A000215AF42017818
-:103B90008F490E14AF4901448F430E1C0A00028E58
-:103BA000240200403C0E20FF27BDFFE03C1A8000AD
-:103BB0003C0F800835CDFFFDAFBF001CAFB2001831
-:103BC000AFB10014AFB00010AF8F0040AF4D0E008A
-:103BD00000000000000000000000000000000000E5
-:103BE000000000003C0C00FF358BFFFDAF4B0E00CA
-:103BF0003C0660048CC95000240AFF7F3C11600021
-:103C0000012A40243507380CACC750008E240438F4
-:103C100024050009AF4500083083FFFF38622F718B
-:103C20002450C0B3AF8000480E000068AF80000091
-:103C300052000001AE20442C0E0004353C118000DF
-:103C40000E000EA8363000708F8A00403C1208002B
-:103C500026523BC8020088218E0800008F5F0000BA
-:103C60003BF900013338000113000017AF88003022
-:103C7000022048218D2700003C0F08008DEF006CCA
-:103C80003C0C08008D8C006800E8C02301F8282156
-:103C90000000682100B8302B018D582101664021B9
-:103CA0003C010800AC25006C3C010800AC28006811
-:103CB0008F44000038830001306200011440FFEDA2
-:103CC00000E04021AF8700308E0C00003C0508006A
-:103CD0008CA5006C3C0408008C84006801883023AB
-:103CE00000A638210000102100E6402B0082182198
-:103CF0000068F8213C010800AC27006C3C0108007A
-:103D0000AC3F00688F49010025590088AF990044F5
-:103D1000AF890038AF4900208E070000AF87003020
-:103D20008F4D017805A0FFFE000000008E06000008
-:103D30003C0B08008D6B00743C0408008C84007000
-:103D400000C728230165F8210000102103E5402B5E
-:103D50000082382100E8C821240908003C0108003D
-:103D6000AC3F00743C010800AC390070AF490178E9
-:103D700093580108A398003E938F003E31EE000156
-:103D800015C000158F830038240E0D00106E001929
-:103D9000240F0F00106F001D00000000915900005B
-:103DA00024180050332900FF113800043C1F400044
-:103DB000AF5F01380A0002E7000000000E0008EEC5
-:103DC000000000008F8A00403C1F4000AF5F0138B8
-:103DD0000A0002E700000000938D003E31AC0006AF
-:103DE000000C51000E0000CE0152D8210A000343FE
-:103DF0008F8A00403C1B0800277B3C480E0000CE09
-:103E0000000000000A0003438F8A00403C1B0800AA
-:103E1000277B3C680E0000CE000000000A00034330
-:103E20008F8A004090AA00018FAB00108CAC00106C
-:103E30003C0300FF8D680004AD6C00208CAD0014C5
-:103E400000E060213462FFFFAD6D00248CA70018F4
-:103E50003C09FF000109C024AD6700288CAE001C9E
-:103E60000182C82403197825AD6F0004AD6E002CC3
-:103E70008CAD0008314A00FFAD6D001C94A9000212
-:103E80003128FFFFAD68001090A70000A560000278
-:103E9000A1600004A167000090A30002306200FF4F
-:103EA0000002198210600005240500011065000E53
-:103EB0000000000003E00008A16A00018CD800287F
-:103EC000354A0080AD7800188CCF0014AD6F001417
-:103ED0008CCE0030AD6E00088CC4002CA16A0001AD
-:103EE00003E00008AD64000C8CCD001CAD6D001823
-:103EF0008CC90014AD6900148CC80024AD6800089A
-:103F00008CC70020AD67000C8CC200148C83006449
-:103F10000043C82B13200007000000008CC20014CF
-:103F2000144CFFE400000000354A008003E0000864
-:103F3000A16A00018C8200640A000399000000005D
-:103F400090AA000027BDFFF88FA9001CA3AA0000BB
-:103F50008FAE00003C0FFF808FA8001835E2FFFFF6
-:103F60008CCD002C01C26024AFAC0000A120000465
-:103F700000E06021A7A000028FB800008D27000498
-:103F80000188182100A0582100C05021006D28266A
-:103F90003C06FF7F3C0F00FF2CAD000135EEFFFF1C
-:103FA00034D9FFFF3C02FF0003193024000D1DC06F
-:103FB000010EC82400E2C02400C37025031978252F
-:103FC000AD2E0000AD2F00048D450024AFAE0000E3
-:103FD000AD2500088D4D00202405FFFFAD2D000C00
-:103FE000956800023107FFFFAD27001091660018A9
-:103FF00030C200FF000219C2506000018D4500343C
-:10400000AD2500148D67000827BD0008AD27001CF2
-:104010008C8B00CCAD2C0028AD20002CAD2B0024C7
-:10402000AD20001803E00008AD20002027BDFFE010
-:10403000AFB20018AFB10014AFB00010AFBF001C9A
-:104040009098000000C088213C0D00FF330F007FD6
-:10405000A0CF0000908E000135ACFFFF3C0AFF00AE
-:10406000A0CE000194A6001EA22000048CAB001478
-:104070008E29000400A08021016C2824012A4024FC
-:104080000080902101052025A6260002AE24000410
-:1040900026050020262400080E00007624060002D3
-:1040A00092470000260500282624001400071E0061
-:1040B0000003160324060004044000032403FFFF4A
-:1040C000965900023323FFFF0E000076AE23001046
-:1040D000262400248FBF001C8FB200188FB100145B
-:1040E0008FB0001024050003000030210A0000807A
-:1040F00027BD002027BDFFD8AFB1001CAFB000180E
-:10410000AFBF002090A80000240200018FB0003C47
-:104110003103003F00808821106200148FAA00380C
-:10412000240B0005506B0016AFAA001000A0202140
-:1041300000C028210E0003DC02003021922400BCC4
-:10414000308300021060000326060030ACC000007F
-:1041500024C600048FBF00208FB1001C8FB0001850
-:1041600000C0102103E0000827BD002801403821CD
-:104170000E00035AAFB000100A0004200000000037
-:104180000E0003A1AFB000140A00042000000000DC
-:104190003C02000A034218213C04080024843CAC81
-:1041A0002405001A000030210A000080AF8300546B
-:1041B0003C038000346200708C48000000A058214D
-:1041C00000C04821308A00FFAF8800308F4401785A
-:1041D0000480FFFE3C0C8000358600708CC500001A
-:1041E0003C0308008C6300743C1808008F180070B2
-:1041F00000A82023006468210000C82101A4782BB6
-:104200000319702101CF60213C010800AC2D00741E
-:104210003C010800AC2C00708F480E14AF480144DC
-:10422000AF47014CA34A0152A74B015893460108DE
-:1042300030C5000854A0000135291000934B090037
-:1042400024070050316A00FF1147000700000000FA
-:104250008F450E1CAF450148AF4901543C09100081
-:1042600003E00008AF490178934D010831A8000828
-:104270001100001000000000934F010831EE001003
-:1042800051C00001352900083C04080090843D100D
-:10429000A34401508F4309A4AF4301488F4209A0B2
-:1042A000AF420144AF4901543C09100003E000084B
-:1042B000AF4901783C1908008F393CCC33380008ED
-:1042C0005700FFF1352900080A00047300000000C0
-:1042D00024070040AF470814AF4008108F4209443C
-:1042E0008F4309508F4409548F45095C8F46094C10
-:1042F000AF820064AF830050AF84004CAF85005C98
-:1043000003E00008AF8600609346010930C5007FD6
-:10431000000518C0000521400083102103E00008BB
-:10432000244200883C0A0800914A3CD13C0908001C
-:1043300095293CCA3C051100000A3C0025280002D2
-:1043400000E8302500C5182524820008AC83000051
-:1043500003E00008AC8000048F4A002C974E090847
-:104360003C0F000E034F382131CDFFFF000D41C03F
-:10437000AF48002C9743090894EC001A00804021B4
-:1043800024020001318BFFFFAC8B00008CE9001C84
-:1043900000A0582100C06021AC8900048CE40020FA
-:1043A000AD04000890E30019306300031062004080
-:1043B000000000002865000214A00073240600021B
-:1043C0001066004E0000000024180003107800570B
-:1043D000000000003C09080095293CC093450934C1
-:1043E000934609213C0E080095CE3CC630A200FF42
-:1043F0000002C88294E5002A30C400FF9787005865
-:104400000019C60000041C00312FFFFF0303102514
-:1044100001CF6821004DC82500A720213C0640009F
-:104420000326C02500044C00AD090004AD180000AF
-:10443000934F09203C03000625090014000F760065
-:1044400001C36825AD0D00088F42092C24E5000149
-:1044500030A67FFFAD02000C8F59093025020028DD
-:10446000A7860058AD1900108F440938AD04001418
-:10447000AD2B00048F580940AD380008934F093721
-:104480003C0D080091AD3CD0AD20001031EE00FF96
-:1044900001CC182100036700000D44000188582555
-:1044A0003567FFFFAD27000C03E00008AF4A002C82
-:1044B0003C09080095293CC03C05080094A53CCA6D
-:1044C0003C0F080095EF3CBC94E400243126FFFF2C
-:1044D00000A6702101CF682300041C0025A2FFF272
-:1044E0000062C82524180800AD19000CAD1800148E
-:1044F000AD0000100A0004C82508001894E6002446
-:1045000094E500283C09080095293CC000067C0081
-:104510000005740035ED810035C40800AD0D000CB8
-:10452000AD0400100A0004C8250800143C09080066
-:1045300095293CC03C02080094423CCA3C06080055
-:1045400094C63CBC94E400243125FFFF94F8002875
-:104550000045C8210326782300181C0000046C00C5
-:1045600025EEFFEE006EC82535A281002418080054
-:10457000AD02000CAD190010AD180018AD0000140C
-:104580000A0004C82508001C1460FF920000000007
-:1045900094E300243C09080095293CC00003140062
-:1045A00034590800AD19000C0A0004C82508001091
-:1045B00003E00008240201F427BDFFE8AFB00010BB
-:1045C000AFBF00140E000060008080212405004071
-:1045D000AF4508148F8300508F84004C8F85005C9A
-:1045E000007018210064102318400004AF830050AD
-:1045F000AF6300548F660054AF86004C1200000C6D
-:10460000000000008F440074936800813409FA00B0
-:104610002D07000710E0000500891021936C008130
-:10462000240B01F4018B500401441021AF62000CF3
-:104630008F4E095C01C5682319A000048FBF0014C8
-:104640008F4F095CAF8F005C8FBF00148FB00010DC
-:104650000A00006227BD00188F8400648F83005019
-:104660008F82004CAF640044AF63005003E0000849
-:10467000AF6200543C038000346200708C43000041
-:1046800027BDFFF8308700FF30A900FF30C800FFCA
-:10469000AF8300308F4401780480FFFE3C0280002D
-:1046A000345900708F380000A3A700033C070800AE
-:1046B0008CE700748FAC00003C0608008CC60070CC
-:1046C000030378233C0E7FFF00EFC82135CDFFFFA9
-:1046D00000005021018D282400CA1821000847C07D
-:1046E000032F202B00A810250064C021AFA20000DA
-:1046F0003C010800AC3900743C010800AC38007083
-:10470000934F010AA3A000023C0E80FFA3AF00015B
-:104710008FAC0000312B007F35CDFFFF018D482489
-:10472000000B5600012A4025240730002406FF8094
-:104730003C05100027BD0008AF48014CAF470154AD
-:10474000A7400158A346015203E00008AF45017895
-:1047500027BDFFE8AFBF0014AFB000108F65007435
-:104760003C068000309000FF00A620250E0000606F
-:10477000AF64007493630005346200080E000062A9
-:10478000A3620005020020218FBF00148FB000102B
-:1047900024050005240600010A00056E27BD001847
-:1047A00027BDFFE03C038000AFB00010AFBF001892
-:1047B000AFB10014346200708C470000309000FFED
-:1047C00030A800FFAF8700308F4401780480FFFEDF
-:1047D0003C188000371100708E2F00003C0D08003F
-:1047E0008DAD00743C0A08008D4A007001E770230B
-:1047F00001AE28210000582100AE302B014B48218A
-:10480000012638213C010800AC25007400008821F5
-:104810003C010800AC2700701100000F00000000F0
-:104820008F6200742619FFFF3208007F0002FE022B
-:1048300033E5007F15000006332200FF2407FF80C8
-:104840000207202624A3FFFF00838025320200FFF9
-:1048500000408021241110080E00006000000000BC
-:104860008F4908183125000414A0FFFD3218007F7D
-:10487000001878C00018714001CF682125AC00886D
-:10488000AF4C0818274A09808D4B0020AF4B0144DC
-:104890008D460024AF460148A35001500E0000622F
-:1048A000A7400158022010218FBF00188FB10014BB
-:1048B0008FB0001003E0000827BD002027BDFFE8EF
-:1048C000308400FFAFBF00100E0005B930A500FF17
-:1048D0008F8300508FBF0010344500402404FF90A8
-:1048E0003C02100027BD0018AF43014CA344015205
-:1048F000AF45015403E00008AF4201789343093EFD
-:10490000306200081040000D3C0901013528080AFA
-:10491000AC8800008F470074AC8700043C06080098
-:1049200090C63CD030C5001050A00006AC800008F6
-:104930008F6A0060AC8A00082484000C03E0000841
-:10494000008010210A0006202484000C27BDFFE807
-:10495000AFBF0014AFB000109346093F00A0502134
-:10496000000528800085382330C200FF240300069C
-:104970003C09080095293CC624E8FFD8240500041A
-:1049800010430037240600029750093C3C0F0204F4
-:1049900000063400320EFFFF01CF6825AC8D000009
-:1049A000934C093E318B002011600008000000008C
-:1049B000934309363C020103345F0300307900FF62
-:1049C000033FC02524050008AC9800049343093434
-:1049D000935909210005F882306200FF0002C0826D
-:1049E000332F00FF00186E00000F740001AE602529
-:1049F000018920253C09400000898025ACF0FFD8C2
-:104A0000934309378F4F09488F580940306200FFA0
-:104A1000004AC821033F702101F86023000E6F0097
-:104A200001A650253185FFFF001F5880014548250C
-:104A300001683821AD0900200E00006024F0002834
-:104A4000240400040E000062A364003F0200102151
-:104A50008FBF00148FB0001003E0000827BD0018BE
-:104A60000A0006332406001227BDFFD024090010D7
-:104A7000AFB60028AFB50024AFB40020AFB100142A
-:104A8000AFB000103C010800A0293CD0AFBF002C03
-:104A9000AFB3001CAFB2001897480908309500FF6B
-:104AA0003C02000E3107FFFF000731C0AF46002C6B
-:104AB000974409089344010B30B400FF034280215E
-:104AC000308300300000B021106001070000882111
-:104AD000240C00043C010800A02C3CD0934B093E60
-:104AE000000B5600000A2E0304A0014B000000003A
-:104AF000AF400048934F010B31EE002011C000067B
-:104B0000000000009358093E00189E000013960311
-:104B10000640016B000000009344010B308300400D
-:104B2000106000038F9300508F8200502453FFFFCA
-:104B30009347093E30E6000814C000022412000327
-:104B4000000090219619002C93580934934F09378F
-:104B5000A7990058330C00FF31EE00FF024E682188
-:104B6000000D5880016C5021015140213C0108008A
-:104B7000A4283CC69205001830A900FF010918219D
-:104B80003C010800A4233CC8921100181620000321
-:104B90002467000A0000000D2467000A30F0FFFFC0
-:104BA0003C010800A4233CCA3C010800A4203CC0EE
-:104BB0003C010800A4203CBC0E00009E0200202105
-:104BC0000E00049A004020218F4B002C974A0908C0
-:104BD0003C0C000E034C38213145FFFF000549C055
-:104BE000AF49002C9743090894F1001A0040402176
-:104BF000241F00013226FFFFAC4600008CE2001C9F
-:104C0000AD0200048CE40020AD04000890E300191C
-:104C100030630003107F00D6286D000215A0011C30
-:104C2000240E0002106E010E240F0003106F00E32B
-:104C3000000000003C09080095293CC0934E09344F
-:104C4000935109213C0A0800954A3CC631CD00FF2A
-:104C500094F9002A000D188297870058322C00FF23
-:104C600000032E00000C24003126FFFF3142FFFF1D
-:104C700000A4F8250046482103E978250327702180
-:104C80003C18400001F86825000E8C00AD0D0000B6
-:104C9000AD110004934C09203C03000625110014BB
-:104CA000000C2E0000A31025AD0200088F49092C2E
-:104CB00024E40001309F7FFFAD09000C8F460930CE
-:104CC00025090028A79F0058AD0600108F59093804
-:104CD00001203021AD190014AE3300048F58094073
-:104CE000AE380008934F09373C0C0800918C3CD03B
-:104CF000AE20001031EE00FF01D26821000D2F0020
-:104D0000000C1C0000A310253447FFFFAE27000C49
-:104D1000AF4B002C934B093E317300081260000D1D
-:104D20003C0F010135E7080AAD0700288F4B0074DE
-:104D3000AD2B00043C13080092733CD03268001085
-:104D400051000003AD2000088F780060AD380008E6
-:104D50002526000C12C0003800000000935F093FB8
-:104D6000241600062407000433F900FF133600D28E
-:104D7000240800029743093C3C0C02043064FFFF06
-:104D8000008C2825ACC500009342093E3049002024
-:104D90001120000800000000934B09363C1301036A
-:104DA000366E0300316D00FF01AE8825ACD10004E2
-:104DB000240700089349093493590921314BFFFF17
-:104DC000313F00FF001FB082333800FF001656004D
-:104DD00000187C00014F982500122880026B68257E
-:104DE0003C0E400000C5502301AE8825AD51FFD8D0
-:104DF000934309378F5F09488F490940306C00FFA2
-:104E000001921021000720820044C82103E9782381
-:104E10000019C7000008B4000316402531E7FFFF62
-:104E2000010730250E000060AD46FFF82412000493
-:104E30000E000062A372003F0E0000C70200202196
-:104E40003C12080092523CD0325000031200000F76
-:104E500002A020218F82005024470001AF8700501C
-:104E6000AF6700508F6800540107302318C000025C
-:104E700000E020218F640054AF6400548F4C007414
-:104E8000258401F4AF64000C02A0202102802821B7
-:104E9000A76000680E0005B93C1410008F8D00500B
-:104EA00034550006AF4D014C8F9100488FBF002C48
-:104EB0008FB6002826230001AF8300488FB3001C63
-:104EC000A35101528FB20018AF5501548FB1001495
-:104ED000AF5401788FB500248FB400208FB000103C
-:104EE00003E0000827BD00309358093E00189E00DB
-:104EF0000013960306420051241100029344092333
-:104F0000308300021060FEFB8F8600608F820050AD
-:104F100014C2FEF8000000000E0000600000000057
-:104F20009369003F24070016312800FF1107000C89
-:104F3000240500083C0C0800918C3CD0358B000106
-:104F40003C010800A02B3CD0936A003F314300FF96
-:104F500010650065240D000A106D005E2402000C2F
-:104F60000E000062000000000A00068E0000000033
-:104F70003C09080095293CC03C04080094843CCAC4
-:104F80003C1F080097FF3CBC94F800243123FFFF2E
-:104F90000083C821033F782300186C0025EEFFF240
-:104FA00001AE6025240A0800AD0C000CAD0A001407
-:104FB000AD0000100A0006E0250800183C090800B2
-:104FC00095293CC03C1F080097FF3CCA3C190800CB
-:104FD00097393CBC94EF00243124FFFF94EE002865
-:104FE00003E4C02103196823000F2C00000E5400B5
-:104FF00025ACFFEE014C882534A281002406080070
-:10500000AD02000CAD110010AD060018AD0000148B
-:105010000A0006E02508001C8F6E00848F4D0940B1
-:1050200011A0FEB3AF8E0050240F00143C01080005
-:10503000A02F3CD00A00068D000000003C010800B3
-:10504000A0313CD0935F093E2416000133F90020C3
-:105050001720FEA8241100080A00068E241100045F
-:1050600094E5002494F100283C09080095293CC0EF
-:1050700000051400001134003444810034C30800DA
-:10508000AD04000CAD0300100A0006E02508001472
-:105090001460FEE80000000094FF00243C090800B2
-:1050A00095293CC0001FCC0037380800AD18000C13
-:1050B0000A0006E0250800100A00072E2408001246
-:1050C0008F7F004CAF7F00548F7900540A00069701
-:1050D000AF790050A362003F0E00006200000000A4
-:1050E0000A00068E00000000240200140A000807CF
-:1050F000A362003F27BDFFE8308400FFAFBF001070
-:105100000E0005B930A500FF9378007E9379007FEB
-:10511000936E00809368007A332F00FF00186600BA
-:10512000000F6C0031CB00FF018D4825000B5200B1
-:105130008FBF0010012A3825310600FF344470006B
-:1051400000E628252402FF813C03100027BD00183B
-:10515000AF45014CAF440154A342015203E00008A3
-:10516000AF43017827BDFFD8AFB20018AFB100142C
-:10517000AFB00010AFBF0020AFB3001C93420109D5
-:10518000308600FF30B000FF000618C23204000273
-:105190003071000114800005305200FF9367000554
-:1051A00030E5000810A0000D30C80010024020219A
-:1051B0000E0005A502202821240400018FBF002035
-:1051C0008FB3001C8FB200188FB100148FB0001085
-:1051D0000080102103E0000827BD002815000032E0
-:1051E0000000000093430109000028213062007F85
-:1051F000000220C00002F94003E4982126790088CB
-:10520000033B98218E7800248E6F0008130F004610
-:10521000000000008F640084241800020004FD8256
-:1052200033F900031338007C00000000936600830C
-:10523000934A0109514600043205007C10A0006029
-:10524000000000003205007C14A000530240202121
-:1052500016200006320400018E7F00248F590104BD
-:1052600017F9FFD600002021320400011080000A47
-:10527000024020218F4209408F93006410530006A2
-:10528000000000000E00066B022028218F43094019
-:10529000AF630044024020210E00060002202821B6
-:1052A0000A000840240400013C0908008D2900641C
-:1052B000252600013C010800AC26006416000012FF
-:1052C000000000008F6D00843C0E00C001AE602421
-:1052D00015800005024020210E00080E0220282122
-:1052E0000A00084024040001240500040E00056E95
-:1052F00024060001024020210E00080E0220282171
-:105300000A000840240400010E00004124040001AA
-:10531000936B007D020B50250E000062A36A007D96
-:105320000A0008838F6D00848F6600748F48010423
-:105330008E67002400064E021507FFB63126007F57
-:10534000936B008326440001308A007F114600439E
-:10535000316300FF5464FFB08F6400842645000170
-:1053600030B1007F30A200FF1226000424050001A6
-:10537000004090210A00085624110001240FFF80EC
-:10538000024F702401CF9026324200FF004090214E
-:105390000A000856241100010E00066B0220282185
-:1053A000321800301300FFAA321000820240202180
-:1053B0000E0005A5022028210A000840240400014F
-:1053C0008F6E00743C0F80002405000301CF9025F0
-:1053D000AF72007493710083240600010E00056E05
-:1053E000322400FF0E00004124040001936D007D73
-:1053F000020D60250E000062A36C007D3C0B0800CE
-:105400008D6B0054257000013C010800AC30005445
-:105410000A000840240400018F6800743C098000E1
-:105420002405000401093825AF67007493630083E5
-:10543000240600010E00056E306400FF0E000041DE
-:10544000240400019362007D020298250E00006290
-:10545000A373007D0A00084024040001324D00803F
-:1054600039AC0080546CFF6C8F6400840A0008A97A
-:105470002645000127BDFFC83C0A0008AFBF003029
-:10548000AFB5002CAFB40028AFB30024AFB20020FA
-:10549000AFB1001CAFB00018034AD8212409004066
-:1054A000AF490814AF4008108F4209448F43095098
-:1054B0008F4609548F47095C8F48094C9344010873
-:1054C0009345010BAF820064308400FF30A500FFDC
-:1054D000AF830050AF86004CAF87005C0E00082AF7
-:1054E000AF880060144001748FBF0030A76000686F
-:1054F000934D0900240B00503C15080026B53C884C
-:1055000031AC00FF3C12080026523C98118B00037E
-:10551000000000000000A821000090219351010923
-:105520008F9F005024040010322E007F000E68C0B0
-:10553000000E6140018D282124B40088AF54081862
-:105540008F4901048F4A09A43C0B000E034BC02174
-:10555000012A10233C010800AC223CAC8F430958BF
-:105560003C010800A0243CD097470908007F302365
-:105570003C010800AC263CB030E8FFFF0008C9C081
-:105580003C010800AC3F3CD4AF59002C97420908BD
-:105590009710002C8EB10000930F0018037498210F
-:1055A000A7900058AF9300440220F80931F000FFA3
-:1055B000304E000215C001A9304F000111E0015D1D
-:1055C000000000009343093E3066000814C000024A
-:1055D000241400030000A0218F5809A42413000103
-:1055E0003C010800AC383CD8934F0934935109373B
-:1055F00031EC00FF322E00FF028E6821000D288062
-:1056000000AC5021015058213C010800A42B3CC89B
-:105610003C010800A42A3CC693490934312200FF0A
-:1056200002022021249000103C010800A4303CC458
-:10563000240700068F9F00503C010800AC273CCC9B
-:105640008F88005C8F59095800008021011F282392
-:1056500004A00151033F20230480014F00A4302BFC
-:1056600010C00151000000003C010800AC253CB016
-:105670008E4200000040F8090000000030430002A4
-:10568000146000F100408821304400015480001073
-:105690008E4200043C0908008D293CB43C0AC0003D
-:1056A000012A8025AF500E008F45000030AB000866
-:1056B0001160FFFD00000000974D0E08241000014E
-:1056C000A78D003C8F4C0E04AF8C00348E4200043A
-:1056D0000040F8090000000002228825322E000256
-:1056E00015C0016F000000003C09080095293CBC72
-:1056F0003C06080094C63CC83C04080094843CBEA8
-:105700003C1808008F183CB4012658213C0F0800B3
-:105710008DEF3CD83C1F080097FF3CD20164182154
-:105720008F4D09400309C821246E0002033F282140
-:1057300001F860213C010800A42B3CCAAF8D006435
-:105740003C010800AC2C3CD83C010800A4253CC01E
-:105750000E00009E31C4FFFF8F87004800402021CB
-:105760003C010800A0273CD18E42000824E800013B
-:10577000AF8800480040F809000000008F4B002C63
-:10578000974909083C0A000E034A38213124FFFFDB
-:10579000000419C08F8A0050AF43002C97430908BA
-:1057A00094E6001A0040402130DFFFFFAC5F0000AC
-:1057B0008CF9001CAC5900048CF80020AC5800088F
-:1057C00090EF001931E30003107300FB00000000AC
-:1057D0002862000214400117240500021065010927
-:1057E000240C0003106C00BC000000003C09080001
-:1057F00095293CC0935F0934934C09213C0D080066
-:1058000095AD3CC633F900FF94E5002A0019C0822B
-:10581000318F00FF978C005800181600000F74009D
-:105820003124FFFF004E382501A4302100E6F82581
-:1058300000ACC8213C03400003E3C02500194C0024
-:10584000AD180000AD090004934F09203C0E00067E
-:1058500025090014000F6E0001AE2825AD050008D3
-:105860008F46092C2582000130477FFFAD06000CD2
-:105870008F440930A787005825060028AD04001082
-:105880008F43093800C02021AD030014AD2A000465
-:105890008F5F0940AD3F0008935909373C0E08005F
-:1058A00091CE3CD0AD200010333800FF0314782196
-:1058B000000F6700000E6C00018D282534A2FFFF49
-:1058C000AD22000CAF4B002C9347093E30EA000894
-:1058D0005140000F8E58000C3C0301013469080A46
-:1058E000AD0900288F4A0074ACCA00043C0B0800C4
-:1058F000916B3CD03168001051000003ACC000082F
-:105900008F650060ACC5000824C4000C8E58000CE4
-:105910000300F809000000003C0F080095EF3CCAA6
-:105920003C02080094423CBE01E2702125C4000202
-:105930000E0000C73084FFFF3C0608008CC63CAC5C
-:105940003C0D08008DAD3CB400CD38233C0108006F
-:10595000AC273CAC14E00006000000003C19080035
-:105960008F393CCC372C00403C010800AC2C3CCC9F
-:10597000120000858F8B00448F480E108F900044DA
-:10598000AE0800208F5F0E18AE1F00243C100800E8
-:1059900096103CC00E00006000000000240500408E
-:1059A000AF4508148F8300508F89004C0070182178
-:1059B0000069502319400004AF830050AF630054C6
-:1059C0008F670054AF87004C1200000C00000000ED
-:1059D0008F440074936D0081340EFA002DA60007E9
-:1059E00010C00005008E182193780081240201F474
-:1059F0000302780401E41821AF63000C8F4C095CAA
-:105A00008F99005C0199202318800003000000009A
-:105A10008F50095CAF90005C0E0000620000000037
-:105A20008F8B00508E4800103C010800AC2B3CD4FA
-:105A30000100F809000000003C1F08008FFF3CAC8B
-:105A400017E0FEFC240700068F4500249742090852
-:105A50008F8A00648F9400503C0F001F9787005876
-:105A60008F8300548F93004C304DFFFF35EEFF8045
-:105A700000AE4824000D31C032320010AF46002481
-:105A8000A467002CAF490024AF6A0044AF740050F3
-:105A9000AF7300545640007E8EB80004322400409C
-:105AA000548000328EB100088EAC000C0180F809E1
-:105AB000000000008FBF00308FB5002C8FB400288D
-:105AC0008FB300248FB200208FB1001C8FB000185C
-:105AD00003E0000827BD00383C09080095293CC0B8
-:105AE0003C04080094843CCA3C1F080097FF3CBC5F
-:105AF00094F800243123FFFF94EF00280083C8218D
-:105B0000033F702300182C00000F640025CDFFEE2A
-:105B1000018D302534A2810024030800AD02000C61
-:105B2000AD060010AD030018AD0000140A0009CE48
-:105B30002508001C934701098F8800380007FE00E4
-:105B400003E8C825AF5900808F5809A08F5309A4D6
-:105B5000AFB80010AF580E148FB40010AF540E1031
-:105B6000AF530E1C0A000942AF530E180220F80969
-:105B7000000000008EAC000C0180F809000000005D
-:105B80000A000A7F8FBF0030A5600020A5730022A5
-:105B90000A000A34AD7300243C010800AC203CB07C
-:105BA0000A00096E8E4200003C010800AC243CB0A3
-:105BB0000A00096E8E4200003C09080095293CC08D
-:105BC0003C1F080097FF3CCA3C19080097393CBCB1
-:105BD00094EF00243124FFFF03E4C0210319702354
-:105BE000000F640025CDFFF2018D2825AC45000C87
-:105BF00024020800AD020014AD0000100A0009CE16
-:105C00002508001894E6002494E300283C090800C5
-:105C100095293CC0000624000003FC003499810053
-:105C200037F80800AD19000CAD1800100A0009CEB5
-:105C3000250800141460FEED0000000094EF00241D
-:105C40003C09080095293CC0000F740035CD0800C0
-:105C5000AD0D000C0A0009CE250800109352010971
-:105C6000000028210E000600324400FF8FBF0030E4
-:105C70008FB5002C8FB400288FB300248FB2002082
-:105C80008FB1001C8FB0001803E0000827BD00385A
-:105C90000300F809000000000A000A7932240040DD
-:105CA0001200FF69000000008F540E148F92004410
-:105CB000AE5400208F530E1C0A000A63AE5300241A
-:105CC0008F82001C008040213C0401009047008529
-:105CD00030E3002010600009000000003C070800CD
-:105CE0008CE73CD48F83001800E320230480000855
-:105CF0009389000414E300030100202103E000085D
-:105D0000008010213C04010003E000080080102105
-:105D10001120000B006738238F8C002024090034E9
-:105D2000918B00BC316A000251400001240900300F
-:105D300000E9682B15A0FFF10100202100E93823BC
-:105D40002419FFFC00B9C02400F9782400F8702B56
-:105D500015C0FFEA01E8202130C200030002182329
-:105D600014C00012306900030000302100A9702126
-:105D700001C6682100ED602B1180FFE03C040100AA
-:105D80002D2F00010006482B0105382101E93024A0
-:105D900014C0FFDA24E4FFFC2419FFFC00B9C0247E
-:105DA0000308202103E00008008010218F8B0020D1
-:105DB00024060004916A00BC314400041480FFEC06
-:105DC00000A970210A000B2D0000302127BDFFE83B
-:105DD000AFBF00108F460100934A01093C1F080025
-:105DE0008FFF00902407FF80314F00FF31E8007FD4
-:105DF0000008614003E6C821032CC02127090120C7
-:105E0000012770243C010800A02F3D10AF4E080C64
-:105E10003C0D08008DAD00903C04008034820003EE
-:105E200001A65821016C18212465012030AA0078B0
-:105E300001424025AF48081C3C1F08008FFF00901E
-:105E40008F88004003E6C021331900070307482468
-:105E5000033A7821AF49002825E909C0952E0002B0
-:105E60003C0D08008DAD008C3C0A08008D4A009066
-:105E700031CC3FFF01A61821000C5980006B28216E
-:105E800000A72024AF44002C952200023C1F0800EC
-:105E90008FFF008C9107008530593FFF03E6782182
-:105EA0000019C1800146702101F8682131CC007FC2
-:105EB00031AB007F019A2821017A50213C03000C6C
-:105EC0003C04000E00A328210144102130E60020EC
-:105ED00027470980AF82002CAF88001CAF890024BF
-:105EE000AF85002010C00006AF8700288D0200504B
-:105EF0008CA4010C0044302318C00077000000007F
-:105F0000910C0085240DFFDF018D3824A107008549
-:105F10008F8B001C8F8900248F8700288D65004C93
-:105F2000AF850018912F000D31EE002011C0001731
-:105F30000000000024090001A3890004AF80000CC8
-:105F40008CE400248F85000C240A0008AF80000830
-:105F5000AF8000103C010800A42A3CBE3C010800B0
-:105F6000A4203CD20E000B01000030218F850024BC
-:105F70008FBF0010AF82001490A8000D27BD00183D
-:105F80000008394203E0000830E20001913F0002BE
-:105F90002418000133F900FF0019218210980039FC
-:105FA000240800021088005B8F86002C8CE50024FA
-:105FB00014A0001B8F9F002091220000240A0005DE
-:105FC0003046003F10CA0047240400018F860008B5
-:105FD000A3840004AF860010AF86000C8CE400247C
-:105FE0008F85000C240A00083C010800A42A3CBE4E
-:105FF0003C010800A4203CD20E000B010000000070
-:106000008F8500248FBF0010AF82001490A8000D70
-:1060100027BD00180008394203E0000830E2000103
-:106020008CF800088CF900248FEE00C4A3800004D3
-:106030008CE40024AF8E000C8F85000C8F86000846
-:1060400003197823240A0008AF8F00103C010800D0
-:10605000A42A3CBE3C010800A4203CD20E000B0147
-:10606000000000008F8500248FBF0010AF82001455
-:1060700090A8000D27BD00180008394203E0000871
-:1060800030E20001912300003062003F10440027FD
-:106090008F8500208CE40024148000210000000083
-:1060A0008D2E00183C187FFF8F850020370FFFFFD3
-:1060B00001CF1824AF8300088F9F00088CA80084AC
-:1060C00003E8C82B1720000203E020218CA40084E1
-:1060D0000A000BBCAF8400088CA3010C0A000B9AC9
-:1060E000AF8300188D2C00188F8600083C0D7FFFB1
-:1060F0008F89002035A3FFFF018358242404000169
-:10610000AF8B0010AD2000CCA38400040A000BC8A4
-:10611000AF86000C8CCA00140A000BBCAF8A0008C2
-:106120008CA300C80A000BFFAF8300088F84002CEB
-:106130008CAC00648C8D0014018D582B1160000410
-:10614000000000008CA200640A000BFFAF82000870
-:106150008C8200140A000BFFAF8200088F85000CB0
-:1061600027BDFFE0AFBF0018AFB1001414A00007B7
-:10617000AFB000108F8600242402000590C40000F8
-:106180003083003F106200B68F8400208F9100089A
-:1061900000A080218F8C00283C0508008CA53CB015
-:1061A0008D8B000431663FFF00C5502B5540000128
-:1061B00000C02821938D000411A0007300B0F82BBB
-:1061C0008F98002024040034930F00BC31EE0002AD
-:1061D00051C000012404003000A4C82B172000D1B6
-:1061E0000000000000A4282300B0F82B3C010800A8
-:1061F000A4243CBC17E00068020020213C030800F6
-:106200008C633CAC0083102B5440000100801821AB
-:106210008F8800243C010800AC233CB400004821D6
-:106220009104000D30830020506000018F490E184A
-:106230008F8300140123382B10E000590000000068
-:106240003C0408008C843CB400895821006B502B1E
-:10625000114000560090602B0069302300C02021BF
-:106260003C010800AC263CB412000003241FFFFCD4
-:106270001090008A32270003009FC8243C010800C8
-:10628000AC393CB43C010800A4203CD28F84000C03
-:10629000120400078F830020AF9100080200202124
-:1062A0008C7100CCAF90000C26300001AC7000CC9B
-:1062B0003C0208008C423CB48F8A0010240700186E
-:1062C0000082202301422823AF84000C10800002AA
-:1062D000AF850010240700108F86001C3C010800C9
-:1062E000A0273CD02407004090CC0085318B00C013
-:1062F000116700408F8D001414A0001500002021AC
-:10630000934A01098F420974314500FF00022602B9
-:1063100024A300013090007F3071007F1230007A9A
-:106320002407FF80A0C300833C0908008D293CCCD2
-:106330008F880024240D0002352C00083C01080041
-:10634000A02D3D113C010800AC2C3CCC24040010D5
-:10635000910E000D31C6002010C0000500801821EC
-:10636000240800013C010800AC283CB4348300013F
-:106370008FBF00188FB100148FB000100060102183
-:1063800003E0000827BD00203C010800A4203CBC1D
-:1063900013E0FF9A020020210A000C5000A02021E7
-:1063A0003C0408008C843CB40090602B1180FFAE4C
-:1063B000000000003C0F080095EF3CBC01E4702198
-:1063C00001C6682B11A000072C8200043C1F60004E
-:1063D0008FF954043338003F1700FFE524030042CF
-:1063E0002C8200041040FFA0240300420A000CAEDF
-:1063F0008FBF0018152DFFC0000000008CDF007457
-:106400003C0380002405FF8003E3C825ACD9007459
-:1064100090D80085240E000424040010330F003FA0
-:1064200001E54025A0C800858F8800243C010800B4
-:10643000A02E3D11240300019106000D30C900205B
-:1064400015200003000000003C0308008C633CB4EE
-:106450003C010800AC233CAC0A000CA50000000085
-:106460008F8700108C88008400E8282B14A000027D
-:1064700000E088218C91008424090001A389000494
-:106480008F440E18022028210E000B01022030211B
-:10649000022080210A000C36AF8200140007182366
-:1064A000306600033C010800A4263CD212200005FF
-:1064B0008F8C0020918B00BC316A000415400015C0
-:1064C00024CD00043C0F080095EF3CD201E470217C
-:1064D00000AE302B50C0FF6E8F84000C2C85000561
-:1064E00014A0FFA324030042309800031700000209
-:1064F000009818232483FFFC3C010800AC233CB423
-:106500000A000C720000000000A758240A000C9A30
-:10651000016718263C010800A42D3CD20A000D0298
-:10652000000000003C010800AC203CB40A000CADA7
-:10653000240300428F830010146000070000102124
-:106540008F880024240500059106000030C400FF58
-:10655000108500030000000003E0000800000000B8
-:10656000910A0018314900FF000939C214E0FFFA0E
-:106570008F85001C3C04080094843CBC3C0308004C
-:106580008C633CD43C1908008F393CB43C0F0800A4
-:1065900095EF3CD20064C0218CAD005403197021EA
-:1065A00001CF6021018D58231960001D00000000FB
-:1065B000910E001C8F8C002C974B0E1031CD00FFDC
-:1065C0008D850004016D30238D88000030CEFFFFE3
-:1065D000000E510000AAC821000038210107202127
-:1065E000032A182B0083C021AD990004AD98000048
-:1065F000918F000A01CF6821A18D000A8F88002C9D
-:10660000974B0E12A50B0008950A0038254900018A
-:10661000A50900389107000D34E60008A106000D19
-:1066200003E000080000000027BDFFE0938700049E
-:106630008F8F00248FAD00143C0E7FFF8F89000CDC
-:1066400035C8FFFFAFBF001CAFB0001801A8182469
-:1066500091EA000D000717C03C1FBFFF00625825DC
-:106660002D2E00018F90001837F9FFFF3C1808000D
-:106670008F183CD43C0F080095EF3CCA0179682480
-:10668000000E47803C07EFFF3C05F0FF01A81825EE
-:106690003149002034E2FFFF34ACFFFF03105823E0
-:1066A00027A500102406000225EA00020062182433
-:1066B0000080802115200002000040218F480E1C20
-:1066C000A7AA0012056000372407000030FF00FF72
-:1066D000001FCF008F8B001C00793825AFA7001456
-:1066E000916F00853C08080091083CD13C18DFFF01
-:1066F00031EE00C0370AFFFF000E182B3C1F0800C8
-:1067000097FF3CC400EA6824A3A8001100031740C7
-:1067100001A248258FB90010AFA900143C0A080057
-:10672000914A3CD3A7BF00168FA80014032CC024A5
-:106730003C0B01003C0F0FFF030B182531470003F2
-:1067400035EEFFFF010C682400071600006EF824E8
-:106750003C09700001A2C82503E95825AFB900140F
-:10676000AFAB00100E000076A3A000158F8C0024A4
-:10677000260200089186000D30C40020108000061B
-:106780008FBF001C3C05080094A53CC024B0FFFF4F
-:106790003C010800A4303CC08FB0001803E00008A2
-:1067A00027BD00208F9800140118502B5540FFC7BB
-:1067B000240700010A000D8530FF00FF93820004CA
-:1067C00027BDFFE0AFBF00181040000F0080502130
-:1067D0008F880024240B00058F8900089107000092
-:1067E0008F8400200100282130E3003F8F86002C99
-:1067F000106B000800003821AFA900100E00040E35
-:10680000AFAA0014A38000048FBF001803E00008A3
-:1068100027BD00208D1900183C0F08008DEF3CB4F7
-:106820008F9800103C027FFF8D080014345FFFFF3B
-:10683000033F682401F8702101AE602301883821EC
-:10684000AFA900100E00040EAFAA00140A000DD369
-:10685000A38000048F8700243C05080094A53CD247
-:106860003C0208008C423CCC90E6000D0005240060
-:1068700030C300201060002C004440258F85001C90
-:1068800000006021240B000190A300850000482136
-:10689000240A00013C0F800035EE00708DC7000017
-:1068A000AF8700308F5801780700FFFE3C0380005F
-:1068B000347900708F3800003C0508008CA5007406
-:1068C0003C0D08008DAD00700307782300AF382120
-:1068D0000000102100EF302B01A22021008618219A
-:1068E0003C010800AC2700743C010800AC23007098
-:1068F000AF4B01483C1908008F393CD4A7490144EB
-:10690000A74A0146AF59014C3C0B0800916B3CD1A2
-:10691000A34B0152AF4801543C081000A74C01584A
-:1069200003E00008AF4801788F4B0E1C3C0A0800BA
-:106930008D4A3CB497490E16974D0E1401456021BF
-:10694000312AFFFF0A000DF631A9FFFF8F830024D3
-:106950009064000D308200201040002900000000EB
-:106960000000482100005021000040213C07800029
-:1069700034EB00708D670000AF8700308F4C0178DA
-:106980000580FFFE3C0D800035AC00708D8B000053
-:106990003C0508008CA500743C0408008C84007041
-:1069A0000167302300A678210000102101E6C82BE2
-:1069B0000082C021031970213C010800AC2F007433
-:1069C0003C010800AC2E0070AF4901483C0D0800A6
-:1069D0008DAD3CD4A748014424090040A74A014694
-:1069E0003C081000240AFF91AF4D014CA34A01520C
-:1069F000AF490154A740015803E00008AF480178AF
-:106A00008F490E1897460E1297450E1030CAFFFF99
-:106A10000A000E2C30A8FFFF8F83002427BDFFF84B
-:106A20009064000D308200201040003A0000000009
-:106A3000240B000100004821240A00013C088000CA
-:106A4000350700708CE30000AF8300308F4C017875
-:106A50000580FFFE3C0E80003C04080090843D1041
-:106A600035C700708CEC00003C0508008CA5007454
-:106A7000A3A400033C1908008F3900708FAD0000FB
-:106A80000183302300A63821000010210322782141
-:106A900000E6C02B01F8602101AE4025AFA8000040
-:106AA0003C010800AC2700743C010800AC2C0070CD
-:106AB0009346010A3C04080090843D11A3A0000203
-:106AC000A3A600018FA300003C0580FF3099007F42
-:106AD00034A2FFFF006278240019C60001F8702577
-:106AE000240D3000AF4E014C27BD0008AF4D0154BE
-:106AF000A7400158AF4B0148A7490144A74A0146A6
-:106B00003C091000240AFF80A34A015203E0000858
-:106B1000AF4901788F4B0E1897460E1297450E100D
-:106B200030CAFFFF0A000E6030A9FFFF8F85001CEE
-:106B30002402008090A40085308300C0106200050C
-:106B40008F8600208F8800088F87000CACC800C893
-:106B5000ACC700C403E00008000000003C0A0800C5
-:106B6000254A38903C0908002529395C3C08080072
-:106B700025082D103C07080024E73A703C06080061
-:106B800024C637003C05080024A534783C040800DE
-:106B9000248430A03C030800246337983C0208009A
-:106BA0002442356C3C010800AC2A3C903C010800B2
-:106BB000AC293C8C3C010800AC283C883C01080016
-:106BC000AC273C943C010800AC263CA43C010800E6
-:106BD000AC253C9C3C010800AC243C983C010800DE
-:106BE000AC233CA83C010800AC223CA003E0000818
-:046BF00000000000A1
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-mips-06-5.0.0.j6.fw.ihex b/firmware/bnx2/bnx2-mips-06-5.0.0.j6.fw.ihex
new file mode 100644
index 000000000000..8d379bffbfef
--- /dev/null
+++ b/firmware/bnx2/bnx2-mips-06-5.0.0.j6.fw.ihex
@@ -0,0 +1,5908 @@
+:10000000080001100800000000004CC8000000C8F3
+:1000100000000000000000000000000008004CC8C4
+:100020000000001400004D90080000880800000047
+:10003000000058C400004DA408005A40000000848D
+:100040000000A668080058C4000001540000A6EC97
+:10005000080031D808000000000075340000A840F6
+:1000600000000000000000000000000008007534DF
+:100070000000002400011D7408000488080004002A
+:100080000000175C00011D98000000000000000047
+:100090000000000000000000000000000000000060
+:1000A000080000A80800000000003B38000134F4FC
+:1000B0000000000000000000000000000000000040
+:0800C000000000000000000038
+:0800C8000A00004400000000E2
+:1000D000000000000000000D636F6D352E302E30E3
+:1000E0006A36000005000002000000000000000366
+:1000F00000000014000000320000000300000000B7
+:1001000000000000000000000000000000000000EF
+:1001100000000010000001360000EA600000000549
+:1001200000000000000000000000000000000008C7
+:1001300000000000000000000000000000000000BF
+:1001400000000000000000000000000000000000AF
+:10015000000000000000000000000000000000009F
+:10016000000000020000000000000000000000008D
+:10017000000000000000000000000000000000007F
+:10018000000000000000000000000010000000005F
+:10019000000000000000000000000000000000005F
+:1001A000000000000000000000000000000000004F
+:1001B000000000000000000000000000000000003F
+:1001C000000000000000000000000000000000002F
+:1001D000000000000000000000000000100000030C
+:1001E000000000000000000D0000000D3C020800AF
+:1001F00024424D003C03080024634DFCAC40000049
+:100200000043202B1480FFFD244200043C1D080005
+:1002100037BD7FFC03A0F0213C1008002610011020
+:100220003C1C0800279C4D000E000214000000003A
+:100230000000000D27BDFFE8AFBF0014AFB00010F5
+:100240009742010830437000240220001062000B26
+:10025000286220011440002F0000102124024000D9
+:1002600010620025000000002402600010620026D9
+:10027000000010210A0000948FBF001427500100D5
+:10028000920200091040001A240300013C020800F9
+:100290008C42002010400016000018210E00052B93
+:1002A00000000000960300083C06080094C64DBEFE
+:1002B0008E0400188F8200209605000C00031C009D
+:1002C00000661825AC440000AC450004240400017D
+:1002D000AC400008AC40000CAC400010AC40001436
+:1002E000AC4000180E000550AC43001C0000182163
+:1002F0000A000093006010210E0003BD0000000002
+:100300000A000093000010210E000F810000000081
+:10031000000010218FBF00148FB0001003E0000810
+:1003200027BD001827BDFFE0AFB00010AFBF001819
+:10033000AFB10014275001009203000B2402001AF1
+:10034000961100081462005B00002821322200018F
+:1003500010400008000000008E0200009603001408
+:10036000000211C200021040005A10210A0000DBF6
+:10037000A44300803C0208008C420020104000286A
+:10038000000000000E00052B00000000974201084D
+:100390009743010C8F8500203042003E3063FFFF01
+:1003A0000002140000431025ACA200008F4201009F
+:1003B0003C06080094C64DBEACA20004974301164B
+:1003C0009744010E3C02200000031C003084FFFF14
+:1003D00000641825ACA3000800C230259742011024
+:1003E0009743011224040001000214003063FFFF50
+:1003F00000431025ACA2000C974201143042FFFFCD
+:10040000ACA200108F420118ACA200149342010B61
+:10041000304200FFACA200180E000550ACA6001C34
+:100420003C0208008C420040244200013C010800CC
+:10043000AC2200403C0308008C63004432220002DE
+:1004400032240004246300013C010800AC23004472
+:10045000108000180002282B8F4202B804430008C5
+:100460008E0200203C0208008C4200602442000101
+:100470003C010800AC2200600A0000FB24050001DA
+:100480009603001600002821AF4202808E0200046D
+:10049000A7430284AF4202883C021000AF4202B878
+:1004A0003C0208008C42005C244200013C01080030
+:1004B000AC22005C8FBF00188FB100148FB0001009
+:1004C00000A0102103E0000827BD002027BDFFE0A9
+:1004D000AFB00010AFBF0018AFB10014275001003B
+:1004E0009203000B24020003961100081462006DB1
+:1004F000000020213222000110400008000000000E
+:100500008E02000096030014000211C20002104087
+:10051000005A10210A000142A44300803C02080056
+:100520008C42002010400025000000000E00052B2A
+:1005300000000000974201089743010C8F850020BE
+:100540003042003E3063FFFF0002140000431025DC
+:10055000ACA200008F4201003C06080094C64DBECC
+:10056000ACA20004974301169744010E3C02200000
+:1005700000031C003084FFFF00641825ACA30008B2
+:1005800000C2302597420110974301122404000154
+:10059000000214003063FFFF00431025ACA2000CE2
+:1005A000974201143042FFFFACA20010ACA000142F
+:1005B000ACA000180E000550ACA6001C3C020800C0
+:1005C0008C420040244200013C010800AC22004063
+:1005D0003C0208008C420044322300042442000103
+:1005E0003C010800AC2200441060001A32220002D4
+:1005F0008F4202B8044300088E0200203C0208002B
+:100600008C420060244200013C010800AC220060E2
+:100610000A0001772404000196030016000020213F
+:10062000AF4202808E020004A7430284AF420288D8
+:100630003C021000AF4202B83C0208008C42005C51
+:10064000244200013C010800AC22005C0A00017851
+:100650008FBF001810400013000020218F430104B9
+:100660003C026020AC4300148C420004240301FED1
+:10067000304203FF1443000B000020218F42010091
+:10068000000211C02442FFFC2C420008104000026E
+:100690002403000200031F403C026000AC436914C5
+:1006A000000020218FBF00188FB100148FB0001000
+:1006B0000080102103E0000827BD00208F430100C7
+:1006C0002402010050620003000311C20000000D6B
+:1006D000000311C200021040005A1021A440008003
+:1006E00003E00008000010219362000003E000080E
+:1006F000AF80000003E000080000102103E00008C4
+:1007000000001021240201001482000800000000F3
+:100710003C0208008C4200FC244200013C0108001D
+:10072000AC2200FC0A00019F30A200203C0208001D
+:100730008C420084244200013C010800AC22008469
+:1007400030A200201040000830A300103C02080036
+:100750008C420108244200013C010800AC2201083F
+:1007600003E0000800000000106000080000000026
+:100770003C0208008C420104244200013C010800B4
+:10078000AC22010403E00008000000003C02080065
+:100790008C420100244200013C010800AC2201000F
+:1007A00003E000080000000027BDFFE8AFBF001015
+:1007B0002744010094830008306200041040001BAD
+:1007C000306600028F4202B804410008240500018F
+:1007D0003C0208008C420060244200013C010800F9
+:1007E000AC2200600A0001EB8FBF00108C82002059
+:1007F0009483001600002821AF4202808C820004FE
+:10080000A7430284AF4202883C021000AF4202B804
+:100810003C0208008C42005C244200013C010800BC
+:10082000AC22005C0A0001EB8FBF001010C0000674
+:10083000006028218F4401000E00018F000000009D
+:100840000A0001EA240500018F8200088F43010499
+:1008500050430007000028218F4401000E00018F43
+:10086000000000008F420104AF8200080000282130
+:100870008FBF001000A0102103E0000827BD001862
+:100880003C0208008C420088274301009465000C5C
+:10089000244200013C010800AC2200888C6400184E
+:1008A0000345102190454000AF4400388C62001C85
+:1008B0002403FFF800052E000043102434420004F6
+:1008C000AF42003C3C020005AF4200300000000097
+:1008D0000000000000000000AF450404000000001C
+:1008E00000000000000000003C020006344200014D
+:1008F000AF420030000000000000000000000000D7
+:100900008F420000304200101040FFFD0000102117
+:1009100003E000080000000027BDFFE0AFB20018B0
+:100920003C036010AFBF001CAFB10014AFB00010AB
+:100930008C6450002402FF7F3C1A80000082202437
+:100940003484380C24020037AC6450003C12080098
+:1009500026524D38AF42000824020C80AF420024DA
+:100960003C1B80083C06080024C6062C02401021CF
+:100970002404001C2484FFFFAC4600000481FFFD1A
+:10098000244200043C0208002442016C3C0108009F
+:10099000AC224D403C020800244204043C01080003
+:1009A000AC224D443C020800244207B83C01080038
+:1009B000AC224D883C0208002442025C3C03080043
+:1009C000246306343C040800248406E03C05080047
+:1009D00024A53B503C010800AC224DA03C0208007D
+:1009E000244205F43C010800AC264D843C0108007B
+:1009F000AC254D943C010800AC234D9C3C01080003
+:100A0000AC244DA43C010800AC224DA83C010800D8
+:100A1000AC234D3C3C010800AC204D483C01080093
+:100A2000AC204D4C3C010800AC204D503C0108006E
+:100A3000AC204D543C010800AC204D583C0108004E
+:100A4000AC204D5C3C010800AC204D603C0108002E
+:100A5000AC244D643C010800AC204D683C0108000A
+:100A6000AC204D6C3C010800AC204D703C010800EE
+:100A7000AC204D743C010800AC204D783C010800CE
+:100A8000AC264D7C3C010800AC264D803C010800A2
+:100A9000AC204D8C3C010800AC254D903C01080079
+:100AA000AC234D980E0006BB000000003C02800005
+:100AB000344200708C420000AF8200143C030800F6
+:100AC0008C6300208F820004104300043C028000ED
+:100AD0000E0004F3AF8300043C0280003446007033
+:100AE0003C0308008C6300A03C0208008C4200A478
+:100AF000104300048F8400143C010800AC2300A4C0
+:100B0000A743009E8CCA00003C0308008C6300BC15
+:100B10003C0208008C4200B80144202300641821E4
+:100B2000000040210064202B0048102100441021C7
+:100B30003C010800AC2300BC3C010800AC2200B81A
+:100B40008F510000322200071040FFDCAF8A0014F2
+:100B50008CC600003C0508008CA500BC3C040800C5
+:100B60008C8400B800CA302300A628210000102180
+:100B700000A6302B00822021008620213227000190
+:100B80003C010800AC2500BC3C010800AC2400B8C6
+:100B900010E0001F322200028F420100AF4200200D
+:100BA0008F420104AF4200A89342010B0E0001885E
+:100BB000305000FF2E02001D544000040010108031
+:100BC0000E00018B0A0002C5000000000052102137
+:100BD0008C4200000040F8090000000010400005B1
+:100BE0003C0240008F4301043C026020AC430014EF
+:100BF0003C024000AF4201383C0208008C42003405
+:100C0000244200013C010800AC22003432220002E0
+:100C10001040000E322200048F4201400E00018875
+:100C2000AF4200200E00034B000000003C024000D9
+:100C3000AF4201783C0208008C4200382442000197
+:100C40003C010800AC220038322200041040FF981A
+:100C50003C0280008F4201800E000188AF420020DC
+:100C60008F43018024020F00146200050000000081
+:100C70008F420188A742009C0A0002FA3C02400011
+:100C80009362000024030050304200FF1443000828
+:100C90003C0240000E00032D000000005440000400
+:100CA0003C0240000E000E0D000000003C0240001F
+:100CB000AF4201B83C0208008C42003C24420001D3
+:100CC0003C010800AC22003C0A00027A3C02800091
+:100CD0003C0290003442000100822025AF440020F5
+:100CE0008F4200200440FFFE0000000003E00008E7
+:100CF000000000003C0280003442000100822025F8
+:100D000003E00008AF44002027BDFFE0AFB10014AE
+:100D1000AFB0001000808821AFBF00180E000302A2
+:100D200030B000FF9362007D022020210202802566
+:100D3000A370007D8F7000743C0280000E00030BD6
+:100D400002028024160000098FBF00188F4201F8AC
+:100D50000440FFFE24020002AF5101C0A34201C4BF
+:100D60003C021000AF4201F88FBF00188FB1001491
+:100D70008FB0001003E0000827BD002027BDFFE86A
+:100D8000AFBF0010974201843042020010400005BE
+:100D9000000020210E001042000000000A00034164
+:100DA000240400018F420188044000098FBF001015
+:100DB0008F4201883C03FF00004310243C030400E1
+:100DC00014430003240400019362003E8FBF00100F
+:100DD0000080102103E0000827BD00182402000154
+:100DE000A3600022A76200168F4401400A0003108E
+:100DF0002405000127BDFFE8AFBF0014AFB000100D
+:100E000093620000304400FF3883002038820030B5
+:100E10000003182B0002102B00621824106000033E
+:100E200024020050148200628FBF001493420148D4
+:100E3000304200FF2443FFFF2C6200051040005C9D
+:100E40008FBF0014000310803C03080024634CC8CB
+:100E5000004310218C420000004000080000000008
+:100E60000E0003028F4401408F70000C8F4201443A
+:100E70001602000224020001AF62000C0E00030BF8
+:100E80008F4401408F420144145000048FBF00146E
+:100E90008FB000100A000FB827BD00188F62000C39
+:100EA0000A0003B300000000976200108F43014462
+:100EB0003042FFFF1462000900000000240200011C
+:100EC000A76200108F420140AF4202003C021000B6
+:100ED000AF4202380A0003BA8FBF001497620010B5
+:100EE0000A0003B3000000000E0003028F4401401B
+:100EF000976200128F4301443050FFFF1603000237
+:100F000024020001A76200120E00030B8F4401406F
+:100F10008F420144160200048FBF00148FB00010EE
+:100F20000A00034527BD0018976200120A0003B3A8
+:100F300000000000976200148F4301443042FFFF1D
+:100F4000146200068FBF0014240200018FB000104D
+:100F5000A76200140A0012E227BD0018976200146D
+:100F60000A0003B300000000976200168F4301449B
+:100F70003042FFFF14620006240200018FBF0014FC
+:100F80008FB00010A76200160A000BAA27BD001838
+:100F900097620016144000068FBF00143C02080040
+:100FA0008C420070244200013C010800AC22007019
+:100FB0008FB0001003E0000827BD001827BDFFE830
+:100FC000AFBF0014AFB000108F500100936200005B
+:100FD00093430109304400FF2402001F106200A562
+:100FE0002862002010400018240200382862000AFD
+:100FF0001040000C2402000B286200081040002C56
+:1010000000000000046000E528620002144000288F
+:1010100024020006106200268FBF00140A0004B7E5
+:101020008FB000101062005E2862000B144000DCDC
+:101030008FBF00142402000E106200738FB00010E6
+:101040000A0004B700000000106200C028620039E6
+:101050001040000A2402008024020036106200CAF8
+:1010600028620037104000B424020035106200C12D
+:101070008FBF00140A0004B78FB000101062002B5D
+:101080002862008110400006240200C824020039B2
+:10109000106200B48FBF00140A0004B78FB00010B4
+:1010A000106200998FBF00140A0004B78FB00010BF
+:1010B0003C0208008C420020104000B98FBF001491
+:1010C0000E00052B000000008F4201008F830020DE
+:1010D0009745010C97460108AC6200008F4201045D
+:1010E0003C04080094844DBE00052C00AC62000452
+:1010F0008F4201180006340000C43025AC6200089D
+:101100008F42011C24040001AC62000C9342010ACE
+:1011100000A22825AC650010AC600014AC6000187B
+:10112000AC66001C0A00048D8FBF00143C0208004E
+:101130008C4200201040009A8FBF00140E00052B37
+:1011400000000000974401083C03080094634DBE72
+:101150009745010C000422029746010E8F82002061
+:10116000000426000083202500052C003C0300809D
+:1011700000A6282500832025AC400000AC400004D8
+:10118000AC400008AC40000CAC450010AC40001472
+:10119000AC400018AC44001C0A00048C240400017C
+:1011A0009742010C144000150000000093620005F6
+:1011B0003042001014400011000000000E00030235
+:1011C0000200202193620005020020213442001019
+:1011D0000E00030BA36200059362000024030020AD
+:1011E000304200FF1043006D020020218FBF001429
+:1011F0008FB000100A00105827BD00180000000D25
+:101200000A0004B68FBF00143C0208008C42002084
+:10121000104000638FBF00140E00052B000000007B
+:101220008F4201048F8300209744010C3C05080085
+:1012300094A54DBEAC6200009762002C000424000F
+:101240003042FFFF008220253C02400E00A22825EC
+:10125000AC640004AC600008AC60000CAC60001032
+:10126000AC600014AC600018AC65001C0A00048C73
+:10127000240400010E00030202002021A7600008E0
+:101280000E00030B02002021020020210E0003109B
+:10129000240500013C0208008C4200201040004060
+:1012A0008FBF00140E00052B000000009742010CB8
+:1012B0008F8300203C05080094A54DBE0002140059
+:1012C000AC700000AC620004AC6000088F64004C9D
+:1012D0003C02401F00A22825AC64000C8F62005025
+:1012E00024040001AC6200108F620054AC62001450
+:1012F000AC600018AC65001C8FBF00148FB00010EC
+:101300000A00055027BD0018240200205082002545
+:101310008FB000100E000FA202002021104000200C
+:101320008FBF0014020020218FB000100000282180
+:101330000A00031027BD0018020020218FBF0014EF
+:101340008FB000100A00061827BD00189745010C41
+:10135000020020218FBF00148FB000100A00063851
+:1013600027BD0018020020218FB000100A00065D82
+:1013700027BD00189345010D020020218FB00010F9
+:101380000A0006A727BD0018020020218FBF001405
+:101390008FB000100A00068327BD00188FBF00140D
+:1013A0008FB0001003E0000827BD00188F420278BC
+:1013B0000440FFFE2402000234840080AF44024057
+:1013C000A34202443C02100003E00008AF4202784E
+:1013D0003C04080094844DCA3C0208008C424DD461
+:1013E0003083FFFF000318C000431021AF42003CD0
+:1013F0003C0208008C424DD0AF4200383C02005005
+:1014000034420008AF42003000000000000000003D
+:10141000000000008F420000304200201040FFFD1D
+:10142000000000008F4204003C010800AC224DC0C7
+:101430008F4204043C010800AC224DC43C02002051
+:10144000AF420030000000003C02080094424DC84A
+:101450003C03080094634DCC3C05080094A54DCE98
+:1014600024840001004310213083FFFF3C01080069
+:10147000A4224DC83C010800A4244DCA14650003F1
+:10148000000000003C010800A4204DCA03E0000851
+:10149000000000003C05000A27BDFFE803452821A5
+:1014A0003C04080024844DB0AFBF00100E0005B509
+:1014B0002406000A3C02080094424DB23C03080096
+:1014C00094634DCE3042000F2442000300431804C1
+:1014D00024027FFF0043102B10400002AF83001C4A
+:1014E0000000000D0E0004C2000000003C020800D5
+:1014F00094424DBA8FBF001027BD001803E00008CA
+:10150000A74200A23C02000A0342102194430006B5
+:101510003C02080094424DBA3C010800A4234DB699
+:10152000004310238F83001C0002140000021403E8
+:101530000043102B03E000083842000127BDFFE8FC
+:10154000AFBF00103C02000A034210219442000683
+:101550003C010800A4224DB60E00050F000000005B
+:101560005440FFF93C02000A8FBF001003E000085E
+:1015700027BD001827BDFFE8AFBF00100E00050F04
+:101580000000000010400003000000000E00051DD8
+:10159000000000003C0208008C424DC08FBF0010CC
+:1015A00027430400AF4200383C0208008C424DC47F
+:1015B00027BD0018AF830020AF42003C3C0200056D
+:1015C000AF42003003E00008AF8000188F8200189F
+:1015D0003C0300060002114000431025AF420030DA
+:1015E0000000000000000000000000008F4200002A
+:1015F000304200101040FFFD27420400AF8200205F
+:1016000003E00008AF8000183C0608008CC64DC4FB
+:101610008F8500188F8300203C02080094424DBA49
+:1016200027BDFFE024A5000124630020244200011F
+:1016300024C70020AFB10014AFB00010AFBF001836
+:10164000AF850018AF8300203C010800A4224DBAEA
+:10165000309000FF3C010800AC274DC404C10008D5
+:101660000000882104E00006000000003C020800A1
+:101670008C424DC0244200013C010800AC224DC008
+:101680003C02080094424DBA3C03080094634DC8E4
+:101690000010202B004310262C420001004410258E
+:1016A000144000048F830018240200101462000FFD
+:1016B000000000000E000541241100013C03080059
+:1016C00094634DBA3C02080094424DC81462000372
+:1016D000000000000E0004C200000000160000031D
+:1016E000000000000E00052B000000003C03080075
+:1016F00094634DBE3C02080094424DBC246300013B
+:101700003064FFFF3C010800A4234DBE1482000397
+:10171000000000003C010800A4204DBE120000069D
+:10172000000000003C02080094424DBAA74200A20B
+:101730000A0005A3022010210E00050F0000000082
+:1017400010400004022010210E00051D00000000C2
+:10175000022010218FBF00188FB100148FB000102D
+:1017600003E0000827BD00203084FFFF30A5FFFF05
+:1017700000001821108000070000000030820001E6
+:101780001040000200042042006518210A0005AB49
+:101790000005284003E000080060102110C000068A
+:1017A00024C6FFFF8CA2000024A50004AC82000028
+:1017B0000A0005B52484000403E0000800000000CE
+:1017C00010A0000824A3FFFFAC860000000000006A
+:1017D000000000002402FFFF2463FFFF1462FFFAF1
+:1017E0002484000403E0000800000000240200013B
+:1017F000AF62000CA7620010A7620012A76200147B
+:1018000003E00008A76200163082007F0342102127
+:101810003C08000E004818213C0208008C420020C1
+:1018200027BDFFD82407FF80AFB3001CAFB200185C
+:10183000AFB10014AFB00010AFBF00200080802116
+:1018400030B100FF0087202430D200FF1040002F6D
+:1018500000009821AF44002C906200002403005047
+:10186000304200FF1443000E000000003C0208005C
+:101870008C4200E00202102100471024AF42002CED
+:101880003C0208008C4200E0020210213042007F3E
+:101890000342102100481021944200D43053FFFF2E
+:1018A0000E00052B000000003C02080094424DBED3
+:1018B0008F8300200011340000C2302500122C005C
+:1018C0003C02400000C2302534A50001AC7000008D
+:1018D0008FBF0020AC6000048FB20018AC7300080A
+:1018E0008FB10014AC60000C8FB3001CAC6500100D
+:1018F0008FB00010AC60001424040001AC6000182C
+:1019000027BD00280A000550AC66001C8FBF0020D0
+:101910008FB3001C8FB200188FB100148FB000106D
+:1019200003E0000827BD00289343010F24020010A4
+:101930001062000E2865001110A00007240200129A
+:10194000240200082405003A10620006000030213D
+:1019500003E0000800000000240500351462FFFCCD
+:10196000000030210A0005D0000000008F42007402
+:1019700024420FA003E00008AF62000C27BDFFE87F
+:10198000AFBF00100E000310240500018FBF001030
+:1019900024020001A762001227BD001824020001E2
+:1019A00003E00008A360002227BDFFE0AFB10014F0
+:1019B000AFB00010AFBF001830B1FFFF0E00030240
+:1019C000008080219362003F24030004304200FF26
+:1019D0001443000C02002021122000082402000AF7
+:1019E0000E0005C900000000936200052403FFFEFD
+:1019F00000431024A362000524020012A362003FEA
+:101A0000020020210E00030BA360008116200003BA
+:101A1000020020210E00062D0000000002002021FF
+:101A2000322600FF8FBF00188FB100148FB0001056
+:101A3000240500380A0005D027BD002027BDFFE09F
+:101A4000AFBF001CAFB20018AFB10014AFB00010B0
+:101A50000E000302008080210E0005C90000000076
+:101A60009362003F24120018305100FF123200032D
+:101A70000200202124020012A362003F93620005AD
+:101A80002403FFFE004310240E00030BA362000595
+:101A9000020020212405002016320007000030211A
+:101AA0008FBF001C8FB200188FB100148FB00010D0
+:101AB0000A00031027BD00208FBF001C8FB2001842
+:101AC0008FB100148FB00010240500390A0005D032
+:101AD00027BD002027BDFFE8AFB00010AFBF001446
+:101AE0009742010C2405003600808021144000102C
+:101AF000304600FF0E000302000000002402001226
+:101B0000A362003F93620005344200100E0005C935
+:101B1000A36200050E00030B020020210200202119
+:101B20000E000310240500200A00069C000000009F
+:101B30000E0005D0000000000E000302020020216C
+:101B4000936200232403FF9F0200202100431024FE
+:101B50008FBF00148FB00010A36200230A00030B94
+:101B600027BD001827BDFFE0AFBF0018AFB10014BC
+:101B7000AFB0001030B100FF0E00030200808021E2
+:101B8000240200120E0005C9A362003F0E00030BE1
+:101B90000200202102002021022030218FBF0018E6
+:101BA0008FB100148FB00010240500350A0005D055
+:101BB00027BD0020A380002C03E00008A380002D97
+:101BC0008F4202780440FFFE8F820034AF42024011
+:101BD00024020002A34202443C02100003E0000879
+:101BE000AF4202783C0360008C625400304200082F
+:101BF0001440FFFD000000008C625408AF82000C0E
+:101C000024020052AC605408AC645430AC625434CA
+:101C10002402000803E00008AC6254003C026000AB
+:101C20008C42540030420008104000053C03600024
+:101C30008C625400304200081440FFFD0000000098
+:101C40008F83000C3C02600003E00008AC435408A2
+:101C500090A3000024020005008040213063003F73
+:101C600000004821146200050000502190A2001CD1
+:101C700094A3001E304900FF306AFFFFAD00000C46
+:101C8000AD000010AD000024950200148D05001C6D
+:101C90008D0400183042FFFF00491023000211009C
+:101CA000000237C3004038210086202300A2102BF9
+:101CB0000082202300A72823AD05001CAD040018D6
+:101CC000A5090014A5090020A50A001603E00008D4
+:101CD000A50A00228F4201F80440FFFE2402000200
+:101CE000AF4401C0A34201C43C02100003E000085D
+:101CF000AF4201F83C0208008C4200B427BDFFE867
+:101D0000AFBF001424420001AFB000103C01080036
+:101D1000AC2200B48F4300243C02001F30AA00FF15
+:101D20003442FF8030D800FF006280240080F82118
+:101D300030EF00FF1158003B01405821240CFF8078
+:101D40003C19000A3163007F000310C000031940F2
+:101D5000006218213C0208008C4200DC256800016A
+:101D6000310D007F03E21021004310213043007F3A
+:101D700003431821004C102400794821AF4200246D
+:101D80008D220024016C1824006C7026AD22000CFA
+:101D90008D220024310800FFAD220010952200148E
+:101DA000952300208D27001C3042FFFF3063FFFF8A
+:101DB0008D2600180043102300021100000227C3E3
+:101DC0000040282100C4302300E2102B00C2302341
+:101DD00000E53823AD27001CAD2600189522002011
+:101DE000A522001495220022154B000AA5220016F8
+:101DF0008D2300248D2200082546000131450080F6
+:101E00001462000430C4007F108F000238AA0080E2
+:101E100000C0502151AF000131C800FF1518FFC9A3
+:101E2000010058218F8400343082007F0342182142
+:101E30003C02000A006218212402FF800082202454
+:101E4000AF440024A06A0079A06A00838C6200502D
+:101E50008F840034AC6200708C6500743C027FFF9C
+:101E60003442FFFF00A228240E000703AC65007473
+:101E7000AF5000248FBF00148FB0001003E00008A3
+:101E800027BD001827BDFFC0AFBE0038AFB7003474
+:101E9000AFB5002CAFB20020AFB1001CAFB000183E
+:101EA000AFBF003CAFB60030AFB40028AFB30024E2
+:101EB0008F4500248F4600288F43002C3C02001FD2
+:101EC0003442FF800062182400C230240080A82120
+:101ED000AFA3001400A2F0240E0006C7AFA60010A6
+:101EE0003C0208008C4200E02410FF80036088213F
+:101EF00002A2102100501024AF4200243C0208002E
+:101F00008C4200E002A210213042007F03421821DF
+:101F10003C02000A00629021924200D29363008446
+:101F2000305700FF306300FF2402000110620034CC
+:101F30000360202124020002146200360000000029
+:101F40000E0012AE024028219223008392220083C9
+:101F50003063007F3042007F000210C00003194050
+:101F6000006218213C0208008C4200DC02A2102111
+:101F70000043382100F01024AF4200289225007859
+:101F80009224008330E2007F034218213C02000CBF
+:101F900014850007006280212402FFFFA24200F1A5
+:101FA0002402FFFFA64200F20A0007BF2402FFFF3F
+:101FB00096020020A24200F196020022A64200F200
+:101FC0008E020024AE4200F492220083A24200F06E
+:101FD0008E4200C8AE4200FC8E4200C4AE4200F801
+:101FE0008E220050AE4201008E4200CCAE4201046F
+:101FF000922200853042003F0A00081A3442004015
+:102000000E0012D102402821922200850A00081AEF
+:102010003042003F936200852403FFDF3042003FDF
+:10202000A36200859362008500431024A3620085AB
+:102030009363008393620078307400FF304200FFA6
+:1020400010540036240AFF803C0C000C3283007FC1
+:10205000000310C000031940006218213C02080070
+:102060008C4200DC268800013109007F02A2102189
+:102070000043382130E2007F0342182100EA102497
+:10208000AF420028006C80218E020024028A1824AE
+:10209000006A5826AE02000C8E020024310800FFB0
+:1020A000AE02001096020014960300208E07001C5A
+:1020B0003042FFFF3063FFFF8E06001800431023FD
+:1020C00000021100000227C30040282100C4302371
+:1020D00000E2102B00C2302300E53823AE07001CBD
+:1020E000AE06001896020020A602001496020022F6
+:1020F000A602001692220079304200FF1054000719
+:102100000000000051370001316800FF9222007882
+:10211000304200FF1448FFCD0100A021922200832D
+:10212000A22200798E2200500A00087AAE220070A6
+:10213000A22200858E22004C2405FF80AE42010CB5
+:102140009222008534420020A2220085924200D1D2
+:102150003C0308008C6300DC305400FF3C020800A4
+:102160008C4200E400143140001420C002A3182166
+:1021700000C4202102A21021006438210046102151
+:102180000045182400E52824AF450028AF43002C63
+:102190003042007F924400D030E3007F0342282188
+:1021A000034318213C02000C006280213C02000E17
+:1021B000309600FF00A298211296002A000000002D
+:1021C0008E02000C02002021026028211040002510
+:1021D000261000280E0006E2000000009262000DAA
+:1021E00026830001307400FF3042007FA262000DA0
+:1021F0002404FF801697FFF0267300203C0208009D
+:102200008C4200DC0000A02102A210210044102416
+:10221000AF4200283C0208008C4200E43C03080066
+:102220008C6300DC02A2102100441024AF42002C79
+:102230003C0208008C4200E402A318213063007FB6
+:1022400002A210213042007F0342202103431821C3
+:102250003C02000C006280213C02000E0A00083C97
+:10226000008298218E4200D8AE2200508E4200D8C3
+:10227000AE22007092250083924600D19223008303
+:10228000924400D12402FF8000A228243063007F02
+:10229000308400FF00A628250064182A1060000280
+:1022A00030A500FF38A50080A2250083A225007973
+:1022B0000E0006D5000000009222007E02A0202120
+:1022C000A222007A8E2300743C027FFF3442FFFF7B
+:1022D000006218240E000703AE2300748FA20010C2
+:1022E000AF5E00248FBF003CAF4200288FBE003895
+:1022F0008FA200148FB700348FB600308FB5002C3A
+:102300008FB400288FB300248FB200208FB1001C3F
+:102310008FB0001827BD004003E00008AF42002C3A
+:1023200090A2000024420001A0A200003C0308008B
+:102330008C6300F4304200FF1443000F0080302112
+:10234000A0A000003C0208008C4200E48F8400340E
+:10235000008220213082007F034218213C02000CC1
+:10236000006218212402FF8000822024ACC30000F8
+:1023700003E00008AF4400288C82000024420020C3
+:1023800003E00008AC82000094C200003C08080092
+:10239000950800CA30E7FFFF0080482101021021A4
+:1023A000A4C2000094C200003042FFFF00E2102BE4
+:1023B00054400001A4C7000094A200003C030800A0
+:1023C0008C6300CC24420001A4A2000094A200006F
+:1023D0003042FFFF544300078F8600280107102B6F
+:1023E000A4A000005440000101003821A4C700004F
+:1023F0008F8600288CC4001CAF44003C94A20000CF
+:102400008F43003C3042FFFF000210C000621821E1
+:10241000AF43003C8F42003C008220231880000420
+:10242000000000008CC200180A0008DB24420001F2
+:102430008CC20018AF4200383C02005034420010F9
+:10244000AF4200300000000000000000000000006B
+:102450008F420000304200201040FFFD00000000CD
+:102460008F420404AD2200048F420400AD2200001C
+:102470003C020020AF42003003E0000800000000F2
+:1024800027BDFFE0AFB20018AFB10014AFB000102D
+:10249000AFBF001C94C2000000C080213C120800A5
+:1024A000965200C624420001A602000096030000D6
+:1024B00094E2000000E03021144300058FB10030A9
+:1024C0000E0008B0024038210A00090D000000008B
+:1024D0008C8300048C8200042442004004610007C5
+:1024E000AC8200048C820004044000040000000060
+:1024F0008C82000024420001AC82000096020000A1
+:102500003042FFFF50520001A6000000962200005A
+:1025100024420001A62200008F820028962300009A
+:1025200094420016144300048FBF001C24020001D3
+:10253000A62200008FBF001C8FB200188FB10014BC
+:102540008FB0001003E0000827BD00208F8900280D
+:1025500027BDFFE0AFBF00188D22002827480400E8
+:1025600030E700FFAF4200388D22002CAF880030EA
+:10257000AF42003C3C020005AF42003000000000CA
+:10258000000000000000000000000000000000004B
+:10259000000000008C82000C8C82000CAD02000058
+:1025A0008C820010AD0200048C820018AD0200087D
+:1025B0008C82001CAD02000C8CA20014AD02001035
+:1025C0008C820020AD02001490820005304200FF92
+:1025D00000021200AD0200188CA20018AD02001C0F
+:1025E0008CA2000CAD0200208CA20010AD020024D1
+:1025F0008CA2001CAD0200288CA20020AD02002C91
+:10260000AD060030AD000034978300263402FFFF92
+:1026100014620002006020213404FFFF10E000116A
+:10262000AD040038952300369524003624020001BD
+:102630003063FFFF000318C2006918219065004055
+:10264000308400070082100400451025A06200407D
+:102650008F820028944200563042FFFF0A0009741E
+:10266000AD02003C9523003695240036240200017B
+:102670003063FFFF000318C2006918219065004015
+:102680003084000700821004000210270045102447
+:10269000A0620040AD00003C00000000000000000F
+:1026A000000000003C02000634420040AF4200300F
+:1026B0000000000000000000000000008F42000049
+:1026C000304200101040FFFD8F860028AF88003098
+:1026D00024C2005624C7003C24C4002824C500326C
+:1026E00024C600360E0008EEAFA200108FBF0018FF
+:1026F00003E0000827BD00208F8300243C0608006B
+:102700008CC600E88F82003430633FFF00031980DD
+:1027100000461021004310212403FF803046007F33
+:1027200000431024AF420028034618213C02000C4D
+:102730000062302190C2000D30A500FF000038215A
+:1027400034420010A0C2000D8F8900288F8A002417
+:1027500095230036000A138230480003240200014A
+:10276000A4C3000E1102000B290200021040000554
+:10277000240200021100000C240300010A0009B821
+:102780000000182111020006000000000A0009B82C
+:10279000000018218CC2002C0A0009B82443000153
+:1027A0008CC20014244300018CC200180043102B7B
+:1027B00050400009240700012402002714A200034E
+:1027C000000000000A0009C4240700019522003E11
+:1027D00024420001A522003E000A13823043000378
+:1027E0002C620002104000090080282114600004BF
+:1027F0000000000094C200360A0009D43046FFFFF2
+:102800008CC600380A0009D400802821000030213D
+:102810003C04080024844DD80A000921000000006F
+:10282000274901008D22000C95230006012020215C
+:10283000000216023046003F3063FFFF24020027EB
+:1028400000C0282128C7002810C2000EAF83002432
+:1028500010E00008240200312402002110C2000907
+:102860002402002510C200079382002D0A0009F3FC
+:102870000000000010C200059382002D0A0009F339
+:10288000000000000A00098C000000000A0006BEDB
+:102890000000000095230006912400058D25000C02
+:1028A0008D2600108D2700188D28001C8D290020F2
+:1028B000244200013C010800A4234DDE3C01080035
+:1028C000A0244DDD3C010800AC254DE43C0108008E
+:1028D000AC264DE83C010800AC274DF03C01080057
+:1028E000AC284DF43C010800AC294DF803E0000889
+:1028F000A382002D8F87002827BDFFC0AFB300340F
+:10290000AFB20030AFB1002CAFB00028AFBF00387D
+:102910003C0208008C4200D094E3003030B0FFFF4E
+:10292000005010073045FFFF3063FFFF00C09821C3
+:10293000A7A200103C110800963100C614A300069F
+:102940003092FFFF8CE2002424420030AF42003C72
+:102950000A000A2C8CE2002094E200323042FFFF91
+:1029600054A2000827A400188CE2002C2442003056
+:10297000AF42003C8CE20028AF4200380A000A3A1D
+:102980008F84002827A5001027A6002002203821C8
+:102990000E0008B0A7A000208FA20018244200302B
+:1029A000AF4200388FA2001CAF42003C8F84002849
+:1029B0003C020005AF4200309482003427430400FB
+:1029C0003042FFFF0202102B14400007AF8300309B
+:1029D0009482005494830034020210210043102397
+:1029E0000A000A4E3043FFFF94830054948200345F
+:1029F0000223182100501023006218233063FFFFC8
+:102A0000948200163042FFFF1443000300000000D0
+:102A10000A000A5C24030001948200163042FFFF82
+:102A20000043102B104000058F8200309482001666
+:102A3000006210233043FFFF8F820030AC53000050
+:102A4000AC400004AC520008AC43000C3C02000651
+:102A500034420010AF4200300000000000000000CF
+:102A6000000000008F420000304200101040FFFDC7
+:102A7000001018C20064182190650040320400075D
+:102A8000240200018FBF00388FB300348FB20030B2
+:102A90008FB1002C8FB00028008210040045102553
+:102AA00027BD004003E00008A062004027BDFFA84A
+:102AB000AFB60050AFB5004CAFB40048AFB3004460
+:102AC000AFB1003CAFBF0054AFB20040AFB0003870
+:102AD0008C9000003C0208008C4200E88F86003495
+:102AE000960300022413FF8000C2302130633FFFB1
+:102AF0000003198000C3382100F3102490B20000B5
+:102B0000AF42002C9203000230E2007F03423021EA
+:102B10003C02000E00C28821306300C02402004045
+:102B20000080A82100A0B021146200260000A0218E
+:102B30008E3400388E220018144000022402000156
+:102B4000AE2200189202000D304200201440001501
+:102B50008F8200343C0308008C6300DC001238C014
+:102B6000001231400043102100C7302100463821B7
+:102B700030E300073C02008030E6007800C23025D8
+:102B80000343182100F31024AF4208002463090016
+:102B9000AF4608108E2200188C63000800431021F5
+:102BA000AE2200188E22002C8E2300182442000131
+:102BB0000062182B1060003D000000000A000B109E
+:102BC00000000000920300022402FFC00043102412
+:102BD000304200FF1440000524020001AE2200181C
+:102BE000962200360A000AF93054FFFF8E220014A4
+:102BF00024420001AE2200189202000000021600DA
+:102C000000021603044100290000000096020002A1
+:102C100027A4001000802821A7A200169602000217
+:102C200024070001000030213042FFFFAF82002462
+:102C30000E000921AFA0001C960300023C0408000E
+:102C40008C8400E88F82003430633FFF00031980DA
+:102C500000441021004310213043007F3C05000C4C
+:102C60000053102403431821AF42002800651821A7
+:102C70009062000D001221403042007FA062000DE2
+:102C80003C0308008C6300E48F8200340043102171
+:102C90000044382130E2007F03421021004510211A
+:102CA00000F31824AF430028AEA200009222000DCA
+:102CB000304200101040001302A020218F83002812
+:102CC0008EA40000028030219462003E2442FFFF67
+:102CD000A462003E948400029625000E3084FFFF1B
+:102CE0000E000A0B30A5FFFF8F82002894430034AA
+:102CF0009622000E1443000302A0202124020001AA
+:102D0000A382002C02C028210E00089600000000BB
+:102D10008FBF00548FB600508FB5004C8FB4004861
+:102D20008FB300448FB200408FB1003C8FB00038A9
+:102D300003E0000827BD00588F82002827BDFFD080
+:102D4000AFB40028AFB20020AFBF002CAFB3002457
+:102D5000AFB1001CAFB00018904400D0904300D138
+:102D60000000A021309200FFA3A30010306300FFF9
+:102D70008C5100D88C5300DC1072002B240200010F
+:102D80003C0308008C6300E493A400108F8200349D
+:102D90002406FF800004214000431021004410213C
+:102DA0003043007F00461024AF420028034318211F
+:102DB0003C02000C006218218C62000427A400145D
+:102DC00027A5001002228021027010230440001564
+:102DD000AFA300149062000D00C21024304200FF27
+:102DE00014400007020088219062000D3442004028
+:102DF0000E000896A062000D0A000B5593A2001069
+:102E00000E000A79241400018F830028AC7000D8CA
+:102E100093A20010A06200D193A200101452FFD818
+:102E20000000000024020001168200048FBF002C65
+:102E30000E0006BE000000008FBF002C8FB40028DB
+:102E40008FB300248FB200208FB1001C8FB0001808
+:102E500003E0000827BD003027BDFFD8AFB3001C3A
+:102E6000AFB20018AFB10014AFB00010AFBF002078
+:102E70000080982100E0802130B1FFFF0E00052B7B
+:102E800030D200FF00000000000000000000000041
+:102E90008F820020AC510000AC520004AC530008FB
+:102EA000AC40000CAC400010AC400014AC4000182A
+:102EB0003C03080094634DBE02038025AC50001C07
+:102EC00000000000000000000000000024040001D9
+:102ED0008FBF00208FB3001C8FB200188FB1001479
+:102EE0008FB000100A00055027BD002827BDFFE85D
+:102EF000AFB00010AFBF001430A5FFFF30C600FF19
+:102F00000080802124020C80AF42002400000000D9
+:102F100000000000000000000000000000000000B1
+:102F20000E000B64000000003C040800248400E054
+:102F30008C8200002403FF808FBF00140202102146
+:102F400000431024AF4200248C8200003C03000A9E
+:102F5000020280213210007F035010218FB0001038
+:102F60000043102127BD001803E00008AF820028AD
+:102F700027BDFFE8AFBF00108F4401403C030800AD
+:102F80008C6300E02402FF80AF84003400831821AA
+:102F900000621024AF4200243C020008034240219A
+:102FA000950500023063007F3C02000A03431821AC
+:102FB0000062182130A5FFFF3402FFFF000030211E
+:102FC0003C07602010A20006AF8300282402FFFF08
+:102FD000A5020002946500D40E000B8930A5FFFF06
+:102FE0008FBF001024020C8027BD001803E00008EA
+:102FF000AF4200243C020008034240219502000237
+:103000003C0A0800954A00C63046FFFF14C000077E
+:103010003402FFFF8F8200288F8400343C07602039
+:10302000944500D40A000BF230A5FFFF10C2002423
+:103030008F87002894E2005494E400163045FFFF87
+:1030400000A6102300A6182B3089FFFF1060000493
+:103050003044FFFF00C51023012210233044FFFF3E
+:10306000008A102B1040000C012A102324020001BA
+:10307000A50200162402FFFFA502000294E500D479
+:103080008F8400340000302130A5FFFF3C07602012
+:103090000A000B89000000000044102A10400008BC
+:1030A00000000000950200163042000110400004AC
+:1030B000000000009742007E24420014A502001682
+:1030C00003E00008000000008F84002827BDFFE017
+:1030D000AFBF0018948200349483003E1060001A41
+:1030E0003048FFFF9383002C240200011462002764
+:1030F0008FBF00188F820028000818C2310800070F
+:10310000006218212447003A244900542444002036
+:10311000244500302446003490620040304200FFD5
+:103120000102100730420001104000168FBF001846
+:103130000E0008EEAFA900108F82002894420034E0
+:103140000A000C0B3048FFFF948300369482003451
+:103150001043000E8FBF001894820036A482003402
+:1031600094820056A48200548C82002CAC820024ED
+:1031700094820032A48200309482003CA482003AFF
+:103180008FBF00180A000BCB27BD002003E000080A
+:1031900027BD002027BDFFE8AFBF00108F4A010008
+:1031A0003C0508008CA500E03C02080090424DE47C
+:1031B0003C0C0800958C4DDE01452821304B003F2A
+:1031C00030A2007F03424021396900323C02000AEC
+:1031D0003963003F2C630001010240212D290001C9
+:1031E0002402FF8000A2282401234825AF8A00344E
+:1031F00000801821AF4500240000302100802821E4
+:1032000024070001AF8800283C04080024844DD81E
+:10321000AF8C002415200007A380002D240200207D
+:103220005562000F006020213402FFFF5582000C20
+:10323000006020212402002015620005000000002B
+:103240008C6300142402FFFF1062000700000000DE
+:103250000E000921000000000A000C6800000000B8
+:103260000E00098C016028210E000C0000000000F7
+:103270008FBF001024020C8027BD001803E0000857
+:10328000AF4200243C0208008C4200E027BDFFA0B2
+:10329000AFB1003C008210212411FF80AFBE005866
+:1032A000AFB70054AFB20040AFB00038AFBF005C62
+:1032B000AFB60050AFB5004CAFB40048AFB3004458
+:1032C000005110248F4800248F4900288F47002880
+:1032D000AF4200243C0208008C4200E000809021B4
+:1032E00024060006008210213042007F034218218C
+:1032F0003C02000A006280213C02001F3442FF8031
+:1033000000E2382427A40010260500F00122F02452
+:103310000102B8240E0005B5AFA700308FA2001837
+:10332000AE0200C48FA2001CAE0200C88FA200240F
+:10333000AE0200CC93A40010920300D12402FF80BF
+:103340000082102400431025304900FF3083007FA5
+:103350003122007F0062102A10400004000310C0D8
+:1033600001311026304900FF000310C0000319404E
+:10337000006218213C0208008C4200DC920400D25A
+:10338000024210210043102100511024AF420028B6
+:1033900093A300103063007F000310C000031940A6
+:1033A000006218213C0208008C4200DC024210211D
+:1033B000004310213042007F034218213C02000CE0
+:1033C000006240218FA300142402FFFF106200302E
+:1033D000309500FF93A2001195030014304400FFC4
+:1033E0003063FFFF0064182B1060000D0000000028
+:1033F000950400148D07001C8D0600183084FFFF13
+:1034000000442023000421000000102100E43821A2
+:1034100000E4202B00C230210A000CE200C430215D
+:10342000950400148D07001C8D0600183084FFFFE2
+:1034300000822023000421000000102100801821B8
+:1034400000C2302300E4202B00C4302300E33823E3
+:10345000AD07001CAD06001893A20011A5020014D0
+:1034600097A20012A50200168FA20014AD02001050
+:103470008FA20014AD02000C93A20011A50200203F
+:1034800097A20012A50200228FA20014AD02002410
+:103490002406FF80024610243256007FAF420024EB
+:1034A000035618213C02000A006280218E02004C63
+:1034B0008FA200203124007F000428C0AE020050FB
+:1034C0008FA200200004214000852821AE02007058
+:1034D00093A2001001208821A202008393A2001071
+:1034E000A2020079920200853042003FA2020085CC
+:1034F0003C0208008C4200DC0242102100451021F1
+:1035000000461024AF42002C3C0208008C4200E42C
+:103510003C0308008C6300DC0242102100441021AF
+:1035200000461024AF4200283C0208008C4200E410
+:103530000243182100651821024210210044102185
+:103540003042007F3063007F93A5001003422021AA
+:10355000034318213C02000E006240213C02000C93
+:1035600010B1008C008248213233007F16600019B0
+:103570002404FF803C0208008C4200DC024210213F
+:1035800000441024AF42002C3C0208008C4200E4AE
+:103590003C0308008C6300DC02421021004410242C
+:1035A000AF4200283C0208008C4200E4024318218C
+:1035B0003063007F024210213042007F034220210D
+:1035C000034318213C02000E006240213C02000C23
+:1035D000008248219124000D2414FF800000102156
+:1035E00000942025A124000D9504000295050014E7
+:1035F0008D07001C3084FFFF30A5FFFF8D060018EB
+:10360000008520230004210000E4382100C230217D
+:1036100000E4202B00C43021AD07001CAD060018CB
+:1036200095020002A5020014A50000168D020008F4
+:10363000AD0200108D020008AD02000C95020002E0
+:10364000A5020020A50000228D020008AD02002482
+:103650009122000D3042004010400042262200011D
+:103660003C0208008C4200E0A3B300283C10000A92
+:103670000242102100541024AF4200243C020800F2
+:103680008C4200E0A380002C27A4002C02421021D1
+:103690003042007F03421821007018218C6200D84C
+:1036A0008D26000427A50028AFA9002C0046102174
+:1036B000AC6200D80E000A79AF83002893A30028DB
+:1036C0008F8200280E0006BEA04300D10E000C0021
+:1036D0000000000002541024AF4200243C02080005
+:1036E0008C4200DC00132940001320C000A42021DC
+:1036F000024210210044102100541024AF42002C3B
+:103700003C0208008C4200E43C0308008C6300DCAF
+:10371000035630210242102100451021005410248C
+:10372000AF4200283C0208008C4200E4024318210A
+:103730000064182102421021004510213042007F10
+:103740003063007F03422021034318213C02000E16
+:10375000006240213C02000C00D080210082482100
+:10376000262200013043007F14750005304400FF1D
+:103770002403FF800223102400431026304400FF5E
+:1037800093A2001000808821250800281444FF76A9
+:103790002529002093A400108FA300142402FFFF0A
+:1037A0001062000A308900FF248200012483000196
+:1037B0003042007F14550005306900FF2403FF806C
+:1037C0000083102400431026304900FF9202007845
+:1037D000305300FF11330032012088213C020800E1
+:1037E0008C4200DC3225007F000520C00005294006
+:1037F00000A42021024210212406FF800044102151
+:1038000000461024AF42002C3C0308008C6300DC0F
+:103810003C0208008C4200E40243182102421021BD
+:103820000045102100641821004610243063007FF9
+:10383000AF420028034318213C02000E00624021E1
+:103840003C0208008C4200E48D06000C010020219F
+:1038500002421021004510213042007F034218210E
+:103860003C02000C0062482110C0000D01202821FC
+:103870000E0006E2000000002402FF80022218244D
+:1038800026240001006228263082007F14550002A1
+:10389000308300FF30A300FF1473FFD00060882145
+:1038A0008E0300743C027FFF3442FFFF0062182445
+:1038B000AE0300740E00070302402021AF5700241E
+:1038C0008FA20030AF5E00288FBF005C8FBE005813
+:1038D0008FB700548FB600508FB5004C8FB400489E
+:1038E0008FB300448FB200408FB1003C8FB00038DE
+:1038F00027BD006003E00008AF42002C27BDFFD8C1
+:10390000AFB1001CAFBF0020AFB000182751018835
+:10391000922200032408FF803C03000A3047007F06
+:10392000A3A700108F4601803C0208008C4200E0F3
+:10393000AF86003400C2282100A81024AF42002422
+:103940009224000030A2007F034210210043102186
+:10395000AF8200283084007F2402000214820025F8
+:10396000000719403C0208008C4200E400C210210C
+:103970000043282130A2007F0342182100A8102410
+:10398000AF4200283C02000C006218219062000D3A
+:10399000AFA3001400481025A062000D8FA30014EF
+:1039A0009062000D304200405040006A8FBF0020FE
+:1039B0008F860028A380002C27A400148CC200D876
+:1039C0008C63000427A50010004310210E000A7923
+:1039D000ACC200D893A300108F8200280E0006BE50
+:1039E000A04300D10E000C00000000000A000EA34E
+:1039F0008FBF00200E0006C700C020210E0006D594
+:103A0000000000003C0200080342802192230001D4
+:103A10009202007B1443004F8FBF002092220000CF
+:103A20003044007F24020004108200172882000521
+:103A30001040000624020005240200031082000743
+:103A40008FB1001C0A000EA40000000010820012BA
+:103A50008FBF00200A000EA48FB1001C92050083C6
+:103A6000920600788E0700748F84003430A500FF22
+:103A700000073E0230C600FF0E00070B30E7007F54
+:103A80000A000EA38FBF00200E000C6F8F8400343D
+:103A90000A000EA38FBF002024020C80AF42002436
+:103AA0009202003E30420040104000200000000022
+:103AB0009202003E000216000002160304410006B6
+:103AC000000000008F8400340E00063824050093A7
+:103AD0000A000EA38FBF00209202003F24030018AB
+:103AE000304200FF1443000C8F8400342405003959
+:103AF0000E0005D0000030210E0003028F84003438
+:103B000024020012A202003F0E00030B8F84003437
+:103B10000A000EA38FBF0020240500360E0005D03A
+:103B2000000030210A000EA38FBF00200E00030208
+:103B30008F8400349202000534420020A202000566
+:103B40000E00030B8F8400340E0010588F84003455
+:103B50008FBF00208FB1001C8FB0001824020C8092
+:103B600027BD002803E00008AF42002427BDFFE87E
+:103B7000AFB00010AFBF00142743010094620008EB
+:103B8000000214000002140304410002000080211E
+:103B90002410000194620008304200801040001A96
+:103BA00002001021946200083042200010400016EC
+:103BB000020010218C6300183C021C2D344219EDC8
+:103BC000240600061062000F3C0760213C0208003A
+:103BD0008C4200D4104000078F8200288F83002879
+:103BE000906200623042000F34420040A0620062E6
+:103BF0008F8200288F840034944500D40E000B89F6
+:103C000030A5FFFF020010218FBF00148FB00010FD
+:103C100003E0000827BD001827BDFFE0AFB1001486
+:103C2000AFB00010A380002CAFBF00188F4501007B
+:103C30003C0308008C6300E02402FF80AF85003461
+:103C400000A318213064007F03442021006218245F
+:103C50003C02000A00822021AF43002427500100CB
+:103C60008E0200148C8300DCAF84002800431023F4
+:103C700018400004000088218E0200140E000B1C66
+:103C8000AC8200DC9202000B24030002304200FFF1
+:103C90001443002F0000000096020008304300FF8C
+:103CA0002402008214620005240200840E0009D65A
+:103CB000000000000A000F2F00000000146200093D
+:103CC000240200818F8200288F8400343C07602109
+:103CD000944500D49206000530A5FFFF0A000F1E90
+:103CE00030C600FF14620027000000009202000AA4
+:103CF000304300FF3062002010400004306200407A
+:103D00008F8400340A000F1A24060040104000047B
+:103D1000000316008F8400340A000F1A24060041A5
+:103D200000021603044100178F8400342406004269
+:103D30008F8200283C076019944500D430A5FFFF0E
+:103D40000E000B89000000000A000F2F0000000089
+:103D50009202000B24030016304200FF10430006BD
+:103D6000000000009202000B24030017304200FF05
+:103D700014430004000000000E000EA90000000023
+:103D8000004088210E000C00000000009202000A92
+:103D9000304200081040000624020C808F85002865
+:103DA0003C0400080E0012860344202124020C80EB
+:103DB000AF4200248FBF0018022010218FB00010E6
+:103DC0008FB1001403E0000827BD002027BDFFE8E5
+:103DD000AFBF0014AFB000108F5000243C030800A8
+:103DE0008C6300E08F4501002402FF8000A31821AE
+:103DF0003064007F03442021006218243C02000A42
+:103E000000822021AF850034AF43002490820062FD
+:103E1000AF8400283042000F34420050A08200627C
+:103E20003C02001F3442FF800E0006BE02028024C6
+:103E3000AF5000248FBF00148FB0001003E00008C3
+:103E400027BD00183C0208008C4200201040001DD5
+:103E50002745010090A300093C02000803422021ED
+:103E600024020018546200033C0200080A000F708C
+:103E700024020008034220212402001614620005D7
+:103E80002402001724020012A082003F0A000F7AC9
+:103E900094A700085462000694A7000893620005E6
+:103EA0002403FFFE00431024A362000594A700082A
+:103EB00090A6001B8CA4000094A500060A000B64C9
+:103EC00000073C0003E00008000000002744010058
+:103ED00094820008304500FF38A3008238A2008495
+:103EE0002C6300012C4200010062182510600006BE
+:103EF000240200839382002D1040000D000000007A
+:103F00000A000C330000000014A2000524A2FF8068
+:103F10008F4301043C02602003E00008AC4300141E
+:103F2000304200FF2C420002104000032402002215
+:103F30000A000ED40000000014A2000300000000DC
+:103F40000A000F41000000000A000F5F000000009F
+:103F50009363007E9362007A1443000900002021DD
+:103F60009362000024030050304200FF1443000419
+:103F7000240400019362007E24420001A362007EBB
+:103F800003E00008008010218F4201F80440FFFE8A
+:103F900024020002AF4401C0A34201C43C0210004D
+:103FA00003E00008AF4201F827BDFFE8AFBF0010F3
+:103FB0009362003F2403000A304200FF144300468E
+:103FC000000000008F6300548F62004C1062007D7F
+:103FD000036030219362000024030050304200FF50
+:103FE0001443002F000000008F4401403C020800F1
+:103FF0008C4200E02403FF80008210210043102443
+:10400000AF4200243C0208008C4200E08F6500545F
+:104010003C03000A008220213084007F03441021E9
+:1040200000431021AC4501089762003C8F63004CAF
+:104030003042FFFF0002104000621821AF63005CB5
+:104040008F6300548F64004C9762003C0064182317
+:104050003042FFFF00031843000210400043102AC3
+:1040600010400006000000008F6200548F63004C77
+:10407000004310230A000FF0000210439762003C37
+:104080003042FFFF00021040ACC200642402000175
+:10409000A0C0007CA0C2008424020C80AF42002497
+:1040A0000E000FA28F440140104000478FBF001048
+:1040B0008F4301408F4201F80440FFFE24020002BA
+:1040C000AF4301C0A34201C43C021000AF4201F85B
+:1040D0000A0010408FBF00109362003F24030010BD
+:1040E000304200FF14430004000000008F440140F0
+:1040F0000A00102C000028219362003F24030016C0
+:10410000304200FF1443000424020014A362003F65
+:104110000A00103A000000008F62004C8F630050CC
+:1041200000431023044100288FBF001093620081D8
+:1041300024420001A3620081936200812C420004AA
+:1041400014400010000000009362003F24030004AC
+:10415000304200FF14430006000000008F4401407D
+:104160008FBF0010240500930A00063827BD0018F1
+:104170008F440140240500938FBF00100A0006A75A
+:1041800027BD00188F4401400E000302000000000C
+:104190008F6200542442FFFFAF6200548F620050D0
+:1041A0002442FFFFAF6200500E00030B8F4401401A
+:1041B0008F4401408FBF0010240500040A00031043
+:1041C00027BD00188FBF001003E0000827BD0018AE
+:1041D0008F4201889363007E00021402304400FF86
+:1041E000306300FF1464000D000000009362008043
+:1041F000304200FF1044000900000000A36400806A
+:104200009362000024030050304200FF1443000476
+:10421000000000000A00076F8F440180A364008043
+:1042200003E000080000000027BDFFE8AFB0001069
+:10423000AFBF001493620005240300303042003009
+:1042400014430089008080213C0208008C42002039
+:1042500010400080020020210E00052B000000000D
+:104260008F850020ACB000009362003E9363003F56
+:10427000304200FF00021200306300FF00431025AF
+:10428000ACA2000493620082000216000002160332
+:1042900004410005000000003C0308008C63004856
+:1042A0000A00107E000000009362003E3042004091
+:1042B000144000030000182193620081304300FF86
+:1042C0009362008200031E00304200FF00021400CF
+:1042D00000621825ACA300088F620040ACA2000C5D
+:1042E0008F620048ACA200108F62004CACA2001498
+:1042F0008F6200508F63004C004310230441000381
+:10430000000000000A0010928F62004C8F62005083
+:10431000ACA200183C02080094424DBE3C03C00B06
+:1043200000002021004310250E000550ACA2001C07
+:104330008F6200548F840020AC8200008F6200588E
+:10434000AC8200048F62005CAC8200088F62006067
+:104350008F43007400431021AC82000C8F62006414
+:10436000AC820010976300689762006A00031C002B
+:104370003042FFFF00621825AC8300149362008274
+:1043800024030080304200FF1443000300000000BB
+:104390000A0010C6AC8000188F63000C24020001D4
+:1043A0001062000E2402FFFF9362003E3042004084
+:1043B0001440000A2402FFFF8F63000C8F42007438
+:1043C000006218233C02080000621024144000021E
+:1043D000000028210060282100051043AC8200184D
+:1043E0003C02080094424DBE3C03C00C000020215A
+:1043F000004310258F8300200E000550AC62001C86
+:104400008F6200188F8300203C05080094A54DBEE4
+:1044100024040001AC620000AC6000048F66006CF4
+:104420003C02400D00A22825AC6600088F6200DC2B
+:10443000AC62000CAC600010936200050002160034
+:10444000AC620014AC6000180E000550AC65001C96
+:10445000020020218FBF00148FB00010A360000560
+:104460000A0004B927BD00188FBF00148FB00010D8
+:1044700003E0000827BD00189742007C30C600FF0B
+:10448000A08600843047FFFF2402000514C2000B01
+:1044900024E3465090A201122C420007104000076E
+:1044A00024E30A0090A30112240200140062100405
+:1044B00000E210210A0010FE3047FFFF3067FFFFC7
+:1044C00003E00008A4870014AC87004C8CA201080C
+:1044D0000080402100A0482100E2102330C600FFE8
+:1044E0001840000393AA001324E2FFFCACA20108C9
+:1044F00030C2000110400008000000008D02005092
+:1045000000E2102304410013240600058D0200542C
+:1045100010E20010000000008D02005414E2001AA6
+:10452000000000003C0208008C4200D8304200200D
+:104530001040000A240200019103007891020083D8
+:10454000144300062402000101002021012028213B
+:10455000240600040A0010EC00000000A100008402
+:1045600011400009A50200148F4301008F4201F899
+:104570000440FFFE24020002AF4301C0A34201C475
+:104580003C021000AF4201F803E000080000000008
+:1045900027BDFFE88FA90028AFBF00100080402191
+:1045A00000E918231860007330C600FFA080007C6B
+:1045B000A08000818CA2010800E210230440004D7D
+:1045C000000000008C8200509483003C8C840064C6
+:1045D000004748233063FFFF012318210083202B6D
+:1045E00010800004000000008D0200640A00114FDA
+:1045F00000E210219502003C3042FFFF0122102111
+:1046000000E21021AD02005C9502003C8D03005CCD
+:104610003042FFFF0002104000E210210043102B47
+:1046200010400003000000000A00115E8D02005CD3
+:104630009502003C3042FFFF0002104000E21021D2
+:10464000AD02005CA1000084AD07004C8CA2010803
+:1046500000E210231840000224E2FFFCACA2010893
+:1046600030C200011040000A000000008D0200501E
+:1046700000E2102304410004010020218D020054B7
+:1046800014E20003000000000A0011802406000567
+:104690008D02005414E200478FBF00103C02080056
+:1046A0008C4200D8304200201040000A2402000151
+:1046B0009103007891020083144300062402000154
+:1046C00001002021240600048FBF00100A0010EC16
+:1046D00027BD0018A1000084A50200148F4301002B
+:1046E0008F4201F80440FFFE240200020A0011A5D7
+:1046F000000000008C82005C004910230043102B56
+:1047000054400001AC87005C9502003C3042FFFF42
+:104710000062102B14400007240200029502003CA6
+:104720008D03005C3042FFFF00621821AD03005C86
+:1047300024020002AD07004CA10200840E000FA26B
+:104740008F4401001040001B8FBF00108F430100F9
+:104750008F4201F80440FFFE24020002AF4301C073
+:10476000A34201C43C021000AF4201F80A0011BB91
+:104770008FBF001030C200101040000E8FBF00101D
+:104780008C83005C9482003C006918233042FFFF58
+:10479000006218213C023FFF3444FFFF0083102BCE
+:1047A000544000010080182101231021AD02005C5B
+:1047B0008FBF001003E0000827BD001827BDFFE8E9
+:1047C0008FAA0028AFBF00100080402100EA4823D4
+:1047D0001920002130C600FF8C83005C8C820064AD
+:1047E000006A18230043102B504000100069182164
+:1047F00094A2011001221021A4A2011094A2011080
+:104800003042FFFF0043102B1440000A3C023FFFE0
+:1048100094A2011000431023A4A201109482003C32
+:104820003042FFFF0A0011DA00621821A4A0011033
+:104830003C023FFF3444FFFF0083102B5440000133
+:104840000080182100671021AD02005CA100007CEF
+:104850000A001222A100008130C200101040003C6A
+:10486000000000008C820050004A102318400038DD
+:10487000000000009082007C24420001A082007CA5
+:104880009082007C3C0308008C630024304200FFCF
+:104890000043102B1440005C8FBF00108CA2010855
+:1048A00000E2102318400058000000008C830054E0
+:1048B0009482003C006A18233042FFFF0003184333
+:1048C000000210400043102A1040000500000000C4
+:1048D0008C820054004A10230A001209000210437F
+:1048E0009482003C3042FFFF00021040AD020064A1
+:1048F0009502003C8D0400649503003C3042FFFFAC
+:1049000000021040008220213063FFFF0083182145
+:1049100001431021AD02005C8D020054ACA20108DD
+:1049200024020002A10200840E000FA28F440100A5
+:10493000104000358FBF00108F4301008F4201F8F7
+:104940000440FFFE240200020A00124B0000000097
+:10495000AD07004C8CA2010800E2102318400002B1
+:1049600024E2FFFCACA2010830C200011040000AA2
+:10497000000000008D02005000E2102304410004FA
+:10498000010020218D02005414E200030000000009
+:104990000A001242240600058D02005414E2001A97
+:1049A0008FBF00103C0208008C4200D8304200202B
+:1049B0001040000A24020001910300789102008354
+:1049C00014430006240200010100202124060004F3
+:1049D0008FBF00100A0010EC27BD0018A100008452
+:1049E000A50200148F4301008F4201F80440FFFE2E
+:1049F00024020002AF4301C0A34201C43C021000E4
+:104A0000AF4201F88FBF001003E0000827BD001877
+:104A10008FAA00108C8200500080402130C600FF19
+:104A2000004A102300A048211840000700E0182188
+:104A300024020001A0800084A0A00112A48200141E
+:104A40000A0011BDAFAA0010A0800081AD07004C84
+:104A50008CA2010800E210231840000224E2FFFCAF
+:104A6000ACA2010830C200011040000800000000A4
+:104A70008D0200500062102304410013240600053B
+:104A80008D02005410620010000000008D020054DE
+:104A900014620011000000003C0208008C4200D8A3
+:104AA000304200201040000A2402000191030078E7
+:104AB000910200831443000624020001010020211A
+:104AC00001202821240600040A0010EC0000000048
+:104AD000A1000084A502001403E00008000000000B
+:104AE00027BDFFE0AFBF0018274201009046000A33
+:104AF0008C4800148C8B004C9082008430C900FFDD
+:104B000001681823304A00FF1C60001A2D46000679
+:104B1000240200010142100410C0001630430003BB
+:104B2000012030210100382114600007304C000CB6
+:104B300015800009304200301440000B8FBF001870
+:104B40000A0012AC000000000E0011BDAFAB001057
+:104B50000A0012AC8FBF00180E001132AFAB00106C
+:104B60000A0012AC8FBF0018AFAB00100E0012523B
+:104B7000AFAA00148FBF001803E0000827BD002073
+:104B800024020003A08200848C82005403E0000809
+:104B9000ACA201083C020008034218219062008187
+:104BA000240600433C07601924420001A0620081F2
+:104BB000906300813C0208008C4200C0306300FF1B
+:104BC000146200102403FF803C0208008C4200E0C5
+:104BD0000082102100431024AF4200243C02080050
+:104BE0008C4200E03C03000A008210213042007F2A
+:104BF0000342102100431021944500D40A000B8980
+:104C000030A5FFFF03E000080000000027BDFFE023
+:104C1000AFBF0018AFB10014AFB000108F420180D9
+:104C20000080802100A088210E0012B300402021C6
+:104C3000A20000848E0200548FBF00188FB00010B5
+:104C4000AE2201088FB1001403E0000827BD002048
+:104C500027BDFFE03C020008AFB00010AFBF001856
+:104C6000AFB10014034280218F51014092030084B0
+:104C70008E0400508E02004C14820040306600FF0B
+:104C80003C0208008C4200E02403FF800222102135
+:104C900000431024AF4200243C0208008C4200E094
+:104CA0009744007C92050081022210213042007F4F
+:104CB000034218213C02000A0062182114A0000BD4
+:104CC0003084FFFF2402000554C20014248205DC56
+:104CD0009062011224420001A062011224020C80A1
+:104CE000AF4200240A00130B24020005A060011249
+:104CF0002402000514C20009248205DC920200810E
+:104D00002C4200075040000524820A0092030081D3
+:104D10002402001400621004008210213044FFFFBE
+:104D2000A60400140E0012B3022020219602003CBB
+:104D30008E03004C022020213042FFFF0002104071
+:104D4000006218210E000302AE03005C9202007D97
+:104D500002202021344200400E00030BA202007DFD
+:104D60008F4201F80440FFFE24020002AF5101C04F
+:104D7000A34201C43C021000AF4201F88FBF0018EB
+:104D80008FB100148FB0001003E0000827BD002091
+:104D900008000D9808000DE008000E2008000E6CB9
+:044DA00008000EA059
+:0C4DA4000A0000220000000000000000D7
+:104DB0000000000D6370352E302E306A3600000082
+:104DC00005000004000000000000000000000000DA
+:104DD00000000000000000000000000000000000D3
+:104DE00000000000000000000000000000000020A3
+:104DF00000000000000000000000000000000000B3
+:104E000000000000000000000000000000000000A2
+:104E10000000000000000000000000000000000191
+:104E20000000002B00000000000000000000000057
+:104E300010000003000000000000000D0000000D45
+:104E40003C02080024425AC43C03080024636190D9
+:104E5000AC4000000043202B1480FFFD24420004DE
+:104E60003C1D080037BD7FFC03A0F0213C1008006A
+:104E7000261000883C1C0800279C5AC40E0001A67E
+:104E8000000000000000000D27BDFFE83C0960188D
+:104E9000AFBF00108D2C5000240DFF7F240800317F
+:104EA000018D5824356A380C24070C003C1A800008
+:104EB000AD2A50003C04800AAF4800083C1B800823
+:104EC000AF4700240E000935AF8400100E0008F82B
+:104ED000000000000E000845000000000E0012DC7B
+:104EE000000000003C0460168C8500003C06FFFFBB
+:104EF0003C02535300A618241062004734867C00FD
+:104F000094C201F2A780002C10400003A78000CCBF
+:104F100038581E1EA798002C94C201F810400004B7
+:104F2000978300CC38591E1EA79900CC978300CCDC
+:104F30002C7F006753E00001240300669784002C57
+:104F40002C82040114400002006028212404040083
+:104F50003C0760008CE904382403103C3128FFFF33
+:104F60001103001F30B9FFFF57200010A38000CEAF
+:104F700024020050A38200CE939F00CE53E0000F86
+:104F8000A78500CCA78000CC978500CC8FBF0010F0
+:104F9000A780002CA7800034A78000E63C01080011
+:104FA000AC25008003E0000827BD0018939F00CEC9
+:104FB00057E0FFF5A78000CCA78500CC978500CCF3
+:104FC0008FBF0010A784002CA7800034A78000E6C4
+:104FD0003C010800AC25008003E0000827BD001854
+:104FE000A38000CE8CCB003C316A00011140000E42
+:104FF0000000000030A7FFFF10E0FFDE2402005099
+:105000008CCC00C83186000114C0FFDC939F00CE19
+:105010000A000074240200518C8F00043C0E6000D2
+:105020000A00005701EE30218CEF0808240D5708C4
+:10503000000F740211CD000430B8FFFF2405006694
+:105040000A000075240404001700FFCC939F00CED3
+:105050000A000074240200508F8600103089FFFF80
+:10506000000939408CC300103C08005000E820259E
+:10507000AF4300388CC5001427420400AF82001CE7
+:10508000AF45003CAF4400300000000000000000CD
+:105090000000000000000000000000000000000010
+:1050A00000000000000000008F4B0000316A00206B
+:1050B0001140FFFD0000000003E0000800000000B8
+:1050C0008F840010948A001A8C8700243149FFFFD6
+:1050D000000940C000E83021AF46003C8C85002428
+:1050E0008F43003C00A3102318400029000000005B
+:1050F0008C8B0020256200013C0D005035AC00086F
+:10510000AF420038AF4C003000000000000000004B
+:10511000000000000000000000000000000000008F
+:1051200000000000000000008F4F000031EE002062
+:1051300011C0FFFD000000008F4A04003C08002061
+:10514000AC8A00108F490404AC890014AF480030C9
+:1051500000000000948600189487001C00C71821E6
+:10516000A48300189485001A24A20001A482001AC6
+:105170009498001A9499001E133800030000000050
+:1051800003E000080000000003E00008A480001A0B
+:105190008C8200200A0000D63C0D00500A0000C797
+:1051A000000000003C0308008C6300208F82001880
+:1051B00027BDFFE810620008AFBF00100E0000FE20
+:1051C000AF8300183C0308008C6300202404000116
+:1051D000106400048F8900108FBF001003E00008E6
+:1051E00027BD00188FBF00103C076012A520000AE1
+:1051F0009528000A34E5001027BD00183106FFFF8E
+:1052000003E00008ACA600903C0208008C4200209D
+:1052100027BDFFC8AFBF0034AFBE0030AFB7002C12
+:10522000AFB60028AFB50024AFB40020AFB3001C68
+:10523000AFB20018AFB1001410400050AFB0001072
+:105240008F840010948600069483000A00C32823EC
+:1052500030B6FFFF12C0004A8FBF00349489001897
+:10526000948A000A012A40233102FFFF02C2382B30
+:1052700014E0000202C02021004020212C8C0005F7
+:10528000158000020080A021241400040E0000AD4F
+:10529000028020218F87001002809821AF800014A7
+:1052A00094ED000A028088211280004E31B2FFFF87
+:1052B0003C1770003C1540003C1E60008F8F001CA6
+:1052C0008DEE000001D718245075005002202021D7
+:1052D00002A3802B160000353C18200050780047B0
+:1052E00002202021241000018F8300141460003953
+:1052F000029158230230F8230250C82133F1FFFFF6
+:105300001620FFEE3332FFFF8F8700103C11002084
+:10531000AF5100300000000094E6000A3C1E60120D
+:1053200037D5001002662821A4E5000A94E2000A9D
+:1053300094F2000A94F400183057FFFF1292003BD9
+:10534000AEB700908CED00148CE400100013714097
+:1053500001AE4021000E5FC3010E502B008B48218F
+:10536000012A1821ACE80014ACE3001002D3382362
+:1053700030F6FFFF16C0FFB98F8400108FBF0034D6
+:105380008FBE00308FB7002C8FB600288FB5002459
+:105390008FB400208FB3001C8FB200188FB100149F
+:1053A0008FB0001003E0000827BD0038107E001BFE
+:1053B000000000001477FFCC241000010E00162717
+:1053C000000000008F8300141060FFCB0230F82330
+:1053D000029158238F870010017020210A0001914B
+:1053E0003093FFFF8F8300141460FFCB3C1100202B
+:1053F000AF5100300A00015D000000000E00079E62
+:10540000024028210A000151004080210E00034B78
+:10541000024028210A000151004080210E0014EFB3
+:10542000022020210A000151004080210E0000C707
+:10543000000000000A00017302D3382327BDFFE8F3
+:10544000AFB00010AFBF00140E0000390000000024
+:105450003C028000345000700A0001B48E06000047
+:105460008F4F000039EE000131C2000110400024CE
+:105470008F8600A88E0700003C0C08008D8C003C35
+:105480003C0908008D29003800E66823018D282199
+:105490000000502100AD302B012A402101062021BF
+:1054A0003C010800AC25003CAF8700A83C01080087
+:1054B000AC2400380E000100000000003C0308008E
+:1054C0008C6300701060FFE6006020213C0508003E
+:1054D0008CA500683C0608008CC6006C0E0015B652
+:1054E000000000003C010800AC2000708F4F00005D
+:1054F00039EE000131C200011440FFDE8F8600A8A2
+:105500008E0A00008F8B00A83C0508008CA5003C8B
+:105510003C0408008C840038014B482300A9382142
+:105520000082182100E9402B006810213C0108008E
+:10553000AC27003C3C010800AC2200388F5F010022
+:105540002419FF0024180C0003F9202410980012DD
+:10555000AF840000AF440020936D0000240C0020B5
+:1055600031A600FF10CC0012240E005010CE000413
+:105570003C194000AF5901380A0001AD000000009D
+:105580000E001252000000003C194000AF590138D3
+:105590000A0001AD000000000E000119000000002B
+:1055A0003C194000AF5901380A0001AD000000006D
+:1055B0008F58010000802821330F00FF01E02021D7
+:1055C0000E0002F8AF8F00043C194000AF590138BB
+:1055D0000A0001AD0000000000A4102B240300010C
+:1055E00010400009000030210005284000A4102BC5
+:1055F00004A00003000318405440FFFC00052840AD
+:105600005060000A0004182B0085382B54E0000479
+:105610000003184200C330250085202300031842F0
+:105620001460FFF9000528420004182B03E000086D
+:1056300000C310213084FFFF30A5FFFF8F4201B867
+:105640000440FFFE3C074080008730253C031000EB
+:10565000AF400180AF450184AF46018803E00008F8
+:10566000AF4301B83084FFFF8F4201B80440FFFE12
+:105670003C0740388CA60000008728253C0310001A
+:10568000AF460180AF45018803E00008AF4301B891
+:105690008F8300388F8600301066000B0080402119
+:1056A0003C07080024E75C38000328C000A710214D
+:1056B0008C44000024630001108800053063000F53
+:1056C0005466FFFA000328C003E000080000102120
+:1056D0003C07080024E75C3C00A7302103E00008F9
+:1056E0008CC200003C03900034620001008220253F
+:1056F000AF4400208F45002004A0FFFE0000000002
+:1057000003E00008000000003C0380003462000158
+:105710000082202503E00008AF44002027BDFFE001
+:10572000AFB100143091FFFFAFB00010AFBF001851
+:105730001220001500A080218CA5000010A00013ED
+:10574000240400020E000C7C24060140AE00000080
+:105750008F4201B80440000D000028213C064000A3
+:10576000022620258FBF00188FB100148FB00010C3
+:105770003C03100027BD0020AF450180AF440188E5
+:1057800003E00008AF4301B88CA500008F4201B8C8
+:105790000440FFFE3C064000022620258FBF001873
+:1057A0008FB100148FB000103C03100027BD002003
+:1057B000AF450180AF44018803E00008AF4301B862
+:1057C0003086FFFF8F4201B80440FFFE3C094006CF
+:1057D0008CA8000000C93825AF4801808CA40004C3
+:1057E0003C031000AF440184AF47018803E0000888
+:1057F000AF4301B827BDFFE0AFB00010AFBF001846
+:10580000AFB100149363003E008080210080282106
+:1058100030620040000020211040000F8E11000077
+:105820000E0008710220202193670000240400501C
+:1058300030E500FF50A400128E0F0000022020214E
+:105840008FBF00188FB100148FB00010A762013C09
+:105850000A00093127BD00200E0002870000000069
+:105860000E000871022020219367000024040050DC
+:1058700030E500FF14A4FFF2022020218E0F00006B
+:105880003C1008008E1000503C0D000C240BFF80D3
+:1058900001F05021314E007F01DA6021018D40215D
+:1058A000014B4824AF490028022020218FBF001857
+:1058B0008FB100148FB00010A50200D627BD0020C4
+:1058C0000A000931AF8800D027BDFFE0AFBF001844
+:1058D000AFB10014AFB000109366000100808021CA
+:1058E0000E00025030D1000493640005001029C25C
+:1058F000A765000034830040A36300050E00025931
+:10590000020020210E0009330200202124020001A0
+:10591000AF62000C02002821A762001024040002DC
+:10592000A762001224060140A76200140E000C7C3E
+:10593000A76200161620000F8FBF0018978C003446
+:105940003C0B08008D6B00782588FFFF3109FFFFB5
+:10595000256A0001012A382B10E00006A7880034D0
+:105960003C0F6006240E001635ED0010ADAE005061
+:105970008FBF00188FB100148FB0001003E0000833
+:1059800027BD002027BDFFE0AFB10014AFBF001856
+:10599000AFB0001000A088211080000A3C03600016
+:1059A0002402008010820012000000000000000DA0
+:1059B0008FBF00188FB100148FB0001003E00008F3
+:1059C00027BD00208C682BF80500FFFE00000000BA
+:1059D000AC712BC08FBF00188FB100148FB00010B6
+:1059E0003C09100027BD002003E00008AC692BF83B
+:1059F0000E00025000A02021936500050220202106
+:105A00000E00025930B000FF2403003E1603FFE7EA
+:105A1000000000008F4401780480FFFE2407000787
+:105A20003C061000AF51014002202021A347014451
+:105A30008FBF00188FB100148FB00010AF460178EF
+:105A40000A0002C927BD002027BDFFE8AFBF001430
+:105A5000AFB000108F500020000000000E0009338E
+:105A6000AF440020AF5000208FBF00148FB0001053
+:105A700003E0000827BD00183084FFFF8F4201B803
+:105A80000440FFFE3C074035008730253C031000F2
+:105A9000AF450180AF400184AF46018803E00008B4
+:105AA000AF4301B83084FFFF8F4201B80440FFFECE
+:105AB0003C074036008730253C031000AF4501808D
+:105AC000AF400184AF46018803E00008AF4301B84E
+:105AD00027BDFFD0AFB3001C3093FFFFAFB500244C
+:105AE000AFB20018AFBF0028AFB40020AFB10014B0
+:105AF000AFB0001030B5FFFF12600027000090210A
+:105B00008F90001C8E0300003C06800024020040A1
+:105B100000033E0200032C0230E4007F006688246C
+:105B20001482001D30A500FF8F8300282C68000A16
+:105B3000510000108F910014000358803C0C0800A5
+:105B4000258C58C4016C50218D49000001200008AB
+:105B50000000000002B218213065FFFF0E00022491
+:105B600024040084162000028F90001CAF800028BF
+:105B70008F910014260C0020264B0001018080210B
+:105B80003172FFFF16200004AF8C001C0253282B3B
+:105B900014A0FFDC00000000024010218FBF00288D
+:105BA0008FB500248FB400208FB3001C8FB2001873
+:105BB0008FB100148FB0001003E0000827BD003043
+:105BC000240D003414AD00F600000000920B000E0E
+:105BD000240A16803C07000CA36B00219203000DE1
+:105BE0000347F8213C066000A363002096110012D1
+:105BF0003C057FFF34ACFFFFA771003C960200100C
+:105C0000240B00053054FFFFAF7400848E19001C74
+:105C1000AF4A00288FF800008CCF44480319702643
+:105C200001EE3021AF66004C8F69004C24CD00019D
+:105C30003C197F00AF6900508F640050AF6400547E
+:105C4000AF660070AF6D00588F6800582404005094
+:105C5000AF68005CA3600023AF6C0064A36B0037E7
+:105C60008E030014AF6300488F710048AF710024A9
+:105C70008E020018AF62006C9214000CA374003600
+:105C8000936A003E355F0020A37F003E8F7800744A
+:105C90000319782435EE4000AF6E0074936900005C
+:105CA000313000FF1204022C2418FF803C0408004D
+:105CB00024845CB80E000294000000002406000456
+:105CC000240700013C0408008C845CB8A366007DB6
+:105CD000A36700058F4A01780540FFFE24020002F9
+:105CE000AF440140A34201448F90001C3C141000BB
+:105CF000AF5401780A000373AF8000282CAD003741
+:105D000051A0FF9C8F9100140005A0803C18080052
+:105D1000271858EC029878218DEE000001C0000889
+:105D2000000000002406000614A600110000000078
+:105D30003C1F08008FFF5CB824040005AF5F002003
+:105D40008E190018AF7900188F78004CAF78001CBE
+:105D50008F6F0050122000C2AF6F00700A000373F3
+:105D6000AF840028240A000710AA00842403000638
+:105D70003C05080024A55CB80E00025E24040081E6
+:105D80008F90001C0011102B0A000373AF820028B3
+:105D90002402000414A2FFF6240A00503C09080063
+:105DA0008D295CB8AF4900208E040008AF64004024
+:105DB0008E060008AF6600448E07000CAF670048EF
+:105DC0008E0D0010AF6D004C8E080010AF6800847F
+:105DD0008E050014AF6500508E0C0018AF6C005497
+:105DE0008E0B001CAF6B005893740000328300FFD1
+:105DF000106A01EE000000008F6700488F660040C7
+:105E000000E6682305A000042404008C1620FFDEB1
+:105E100024020003240400823C05080024A55CB889
+:105E20000E000287000000008F90001C000010216F
+:105E30000A000373AF8200282404000514A4FFCCD9
+:105E4000240520003C1F08008FFF5CB8AF5F0020D6
+:105E50008E190004AF79005C921800082410000825
+:105E6000A37800218F8F001C91EE0009A36E002003
+:105E70008F86001C90C9000A312400FF109000108A
+:105E8000288A00091540006C24020002240C00201E
+:105E9000108C000B340580002885002114A0000818
+:105EA0002405400024080040108800053C0500013E
+:105EB000240D0080108D00023C05000224054000E6
+:105EC0008F6E00743C0FFF0001CF48240125802510
+:105ED000AF70007490C4000BA36400818F84001C19
+:105EE0009487000C10E0019400000000948E000CD8
+:105EF000241FFFBF24060004A76E003C9089000EFB
+:105F0000A369003E8F90001C9204000FA364003F21
+:105F10008F94001C8E8D00108F47007401A74023C2
+:105F2000AF6800608E850014AF650064968C001821
+:105F3000A76C0068968B001AA76B006A8E83001C02
+:105F4000AF63006C96820002A762013E928A000E47
+:105F5000A36A003E9379003E033FC02412200167EC
+:105F6000A378003E8F90001C0A000373AF860028C0
+:105F70002414002214B4FF7E240300073C0208000E
+:105F80008C425CB81220000CAF4200200A00037360
+:105F9000AF830028240C003310AC00142405002823
+:105FA0003C05080024A55CB80E00023024040081E2
+:105FB0000A0003F88F90001C3C04080024845CB89D
+:105FC0000E00029400000000936B000024110050AA
+:105FD000316300FF10710151000000008F90001C20
+:105FE000000018210A000373AF8300283C08080052
+:105FF0008D085CB824040081AF480020A3650034FC
+:106000003C05080024A55CB80E000230000000002A
+:106010008F90001C240200090A000373AF8200283D
+:1060200002B288213225FFFF0E00022424040084DE
+:106030000A0003738F90001C1082FFA12405040046
+:10604000288300031060016F240B00042414000156
+:106050005494FF9B240540000A00044724050100D6
+:106060003C04080024845CB88F62004C0E0002944B
+:106070008F6300508F90001C000020210A000373E2
+:10608000AF8400288E1000042404008AAF50002042
+:10609000936E000531C900021520015E020028211F
+:1060A0009378002302002821330F002015E00159C6
+:1060B0002404008D9362003F24190012305F00FF1A
+:1060C00013F90154240400810E0002500200202123
+:1060D00093740023240A0004020020213683004226
+:1060E000A36300230E000259A36A007D8F4B017841
+:1060F0000560FFFE24050002AF500140A3450144A6
+:106100008F90001C3C0C1000AF4C01780A0003F982
+:106110000011102B8E1000042404008AAF500020C0
+:10612000936D000531A80002150000160200282119
+:106130009364003F2407000402002821308600FFFA
+:1061400010C70010240400810E000250020020211C
+:10615000937F002324180012240FFFFE37F900203C
+:10616000A3790023A378003F936E0005020020214D
+:1061700001CF48240E000259A3690005020028211E
+:10618000000020210E000340000000000A0003F878
+:106190008F90001C8E0500043C0F0008034F402127
+:1061A000AF450020910E00002406005031C900FFC9
+:1061B00011260176240400888F5901B80720FFFEBC
+:1061C0003C0C400E008C58253C031000AF4501806C
+:1061D000AF400184AF4B0188AF4301B8910200008A
+:1061E000240AFF8024040004004AF825A11F0000AF
+:1061F0000E000C7C240600300A0003F88F90001C6F
+:106200008E0F00043C14080026945CB83C01080082
+:10621000AC2F5CB8AF4F0020920E000331C90004D0
+:10622000112000022402001224020006A362003F93
+:106230009203001B240AFFC03062003F004AF82589
+:10624000A37F003E92190003333800011700011CA0
+:10625000000000008E020008AE8200083C02080028
+:106260008C425CC01040011B00000000000221C2F3
+:10627000A76400088E0D000C240B000124140014E8
+:10628000AF6D002C8E080010AF6800309605001628
+:10629000A7650038960C0014A76C003AAF6B000C91
+:1062A000A76B0010A76B0012A76B0014A76B00165A
+:1062B00012200146A37400349206000330C7000286
+:1062C0002CF00001260200088F90001C0A000373C6
+:1062D000AF8200288E14000424030081AF540020F4
+:1062E000936800233105001010A001070000000092
+:1062F0008F4401B80480FFFE3C06401F0011382B7C
+:10630000006610253C111000AF540180AF870028B3
+:10631000AF400184AF420188AF5101B80A00037455
+:106320008F9100148E0600043C19000803592021A7
+:10633000AF4600208E07000890980000240F005000
+:10634000331400FF128F0102240500888F4401B826
+:106350000480FFFE3C0D40090011602B00AD1025AC
+:106360003C111000AF460180AF8C0028AF4701847C
+:10637000AF420188AF5101B80A0003748F91001435
+:106380008E04001C0E00023B00000000104000E8DC
+:10639000004048218F90001C240500898F4D01B8D2
+:1063A00005A0FFFE00000000AF4901808E0F001C19
+:1063B0003C1440010011702B00B448253C11100022
+:1063C000AF4F0184AF8E0028AF490188AF5101B8AB
+:1063D0000A0003748F910014961900023C140800FF
+:1063E00026945CB8333800041300008E3C02600031
+:1063F0008E1F001C3C010800AC3F5CB8AF5F002062
+:10640000920C0010240B0014318400FF148B00B890
+:106410000000000096090002312D000115A0014E78
+:10642000000000008E020004AE8200083C0E08004E
+:106430008DCE5CC011C00144000000008F69007463
+:106440003C0E800024040001012E6825AF6D00740D
+:10645000A3600005AF64000C3C0C08008D8C5CC090
+:106460008F88001CA7640010000C59C2A76400129A
+:10647000A7640014A7640016A76B00088D0300082A
+:1064800024040002AF63002C8D0A000CAF6A0030B8
+:1064900091070010A36700348F82001C9045001103
+:1064A000A36500358F86001C90D00012A3700036C3
+:1064B0008F9F001C93F90013A37900378F90001C65
+:1064C00096180014A778003896140016A774003A9E
+:1064D0008E0F0018AF6F00245620FDA5AF84002852
+:1064E0003C05080024A55CB80E00025E00002021D7
+:1064F0008F90001C0A0004B6000020213C05080013
+:1065000024A55CB80E000287240400828F90001C32
+:10651000000030210A000373AF8600283C04080005
+:106520008C845CB80E001574000000008F90001C75
+:106530000A000490000018213C05080024A55CB85E
+:106540000E0002872404008B8F90001C0011302B5A
+:106550000A000373AF8600283C1908008F395CB825
+:106560003C1F08008FFF005024CCFFFE033F782122
+:1065700001F87024AF4E00283C0408008C845CB8FD
+:106580003C0908008D2900500089682131A8007F4E
+:10659000011A282100A78021AE0600D8AF9000D0B4
+:1065A000AE0000DC0A0003C2AE0C0108AF6000843C
+:1065B0003C0508008CA55CB83C0808008D0800501C
+:1065C000240CFF803C02000C00A8A021028C58245F
+:1065D000AF4B00288E1F00143283007F007A5021B9
+:1065E00001427021ADDF00D88E190014AF8E00D0AB
+:1065F000ADD900DC8E180010270FFFFE0A0004152D
+:10660000ADCF0108548BFE2E240540000A0004473C
+:10661000240510000E000335000000000A0003F8F6
+:106620008F90001C8C46442C3C056C6234B0797011
+:106630003C010800AC205CB814D00008240400021F
+:1066400097880034978A002C02802821010A382B71
+:1066500010E0001124040092240400020E000C9AA1
+:10666000240501403C010800AC225CB8AF42002088
+:106670003C0308008C635CB81060000524040083B0
+:106680000E0008650000000010400009240400838B
+:106690003C05080024A55CB80E00025E0000000066
+:1066A0008F90001C0011202B0A000373AF84002878
+:1066B0000E000869000000000A0005978F90001C7A
+:1066C0008E0400080E00023B000000000A00052EA8
+:1066D000AE8200083C05080024A55CB80E0002301C
+:1066E000240400878F90001C0A00054A0011102B1B
+:1066F0000E00086D000000003C05080024A55CB8F1
+:106700000A00063D2404008B0E0002500280202166
+:106710009370002302802021360D00100E000259D4
+:10672000A36D00238F90001C0A0005530000182160
+:10673000240400040E000C9A240500301440002AA2
+:10674000004048218F90001C0A00057E240500832C
+:106750009205000C30BF000113E0000300000000B0
+:106760009602000EA482002C920A000C314800020E
+:106770001100FEF600002821960B00128E03001473
+:10678000A48B001A0A00056AAC83001C8F830038B2
+:106790008F8700301067FE88000020213C09080028
+:1067A00025295C3C000320C0008930218CD40000E6
+:1067B0001285005E247800013303000F5467FFFA4E
+:1067C000000320C00A000505000020213C05080048
+:1067D00024A55CB80E000287240400828F90001C60
+:1067E0000A00054A000010213C0B0008034B202141
+:1067F00024030050240A0001AF420020A0830000BF
+:10680000A08A00018F88001C91070004A08700184F
+:106810008F82001C90450005A08500198F86001C02
+:1068200090DF0006A09F001A8F99001C9338000784
+:10683000A098001B8F94001C928F0008A08F001C52
+:106840008F90001C920E0009A08E001D8F8D001CE1
+:1068500091AC000AA08C001E8F8B001C3C0C080021
+:10686000258C5C3C9163000B3C0B0800256B5C386D
+:10687000A083001F8F8A001C9148000CA088002074
+:106880008F87001C90E5000DA08500218F82001CE1
+:10689000240546469046000EA08600228F9F001CCD
+:1068A00093F9000FA09900238F98001C93140010F7
+:1068B000A09400248F8F001C91F00011A09000255F
+:1068C0008F90001C8F8E00308F990038960D001429
+:1068D000000E18C025C80001A48D0028960A0016D5
+:1068E000006C3021006BF821A48A002A960700185A
+:1068F0003108000FA487002CA485002E8E02001CF6
+:10690000ACC90000AF88003011190003AFE20000ED
+:106910000A00057E00002821250C00013184000FAB
+:10692000000028210A00057EAF8400383C070800DB
+:1069300024E75C380087802100002021ACC00000E3
+:106940000A000505AE0000003C05080024A55CB85F
+:106950000A00063D240400878E0400040E00023B5A
+:10696000000000000A0005A2AE8200083084FFFF8C
+:1069700030C600FF8F4201B80440FFFE000644000D
+:10698000010430253C07200000C720253C031000EF
+:10699000AF400180AF450184AF44018803E00008A7
+:1069A000AF4301B827BDFFE8AFB00010AFBF001480
+:1069B0003C076000240600021080000600A0802131
+:1069C0000010102B8FBF00148FB0001003E00008E0
+:1069D00027BD00183C09600EAD2000348CE5201C5A
+:1069E0008F82001C2408FFFC00A81824ACE3201CA4
+:1069F0000E0006F28C45000C0010102B8FBF001407
+:106A00008FB0001003E0000827BD00183C02600EA4
+:106A10003447010024090018274A04000000000040
+:106A200000000000000000003C06005034C30200DB
+:106A3000AF440038AF45003CAF430030014018215F
+:106A40008F4B0000316800201100FFFD2406007FFD
+:106A50002408FFFF8C6C000024C6FFFF24630004A1
+:106A6000ACEC000014C8FFFB24E7000400000000A9
+:106A700000000000000000003C0F0020AF4F00307D
+:106A80000000000024AD020001A5702B2529FFFFA6
+:106A9000008E20211520FFE101A0282103E000083D
+:106AA0000000000027BDFFE0AFB10014AFBF001829
+:106AB000AFB000103C05600E8CA20034008088212D
+:106AC000144000063C0460008C87201C2408FFFC56
+:106AD00000E8302434C30001AC83201C8F8B001CE1
+:106AE00024090001ACA90034956900028D650014E9
+:106AF0008D70000C2D2400818D6700048D660008C8
+:106B0000108000078D6A00102D2C00041580000EE7
+:106B100030CE0007312D000311A0000B0000000053
+:106B20002404008B020028210E0006F22406000334
+:106B30000011102B8FBF00188FB100148FB0001000
+:106B400003E0000827BD002015C0FFF62404008BD9
+:106B50003C030020AF43003000000000240200018D
+:106B6000AF820014000000000000000000000000E0
+:106B70003C1F0150013FC825253800033C0F600E23
+:106B8000AF47003800181882AF46003C35E8003C9B
+:106B9000AF590030274704008F44000030860020A2
+:106BA00010C0FFFD00000000106000082466FFFF19
+:106BB0002403FFFF8CEB000024C6FFFF24E7000442
+:106BC000AD0B000014C3FFFB250800043C08600E59
+:106BD000AD090038000000000000000000000000C7
+:106BE0003C070020AF470030000000000E00071AED
+:106BF0000140202102002821000020210E0006F281
+:106C0000240600030011102B8FBF00188FB1001451
+:106C10008FB0001003E0000827BD002027BDFFD87B
+:106C2000AFB200183092FFFFAFB10014AFBF002029
+:106C3000AFB3001CAFB000101240002C0000882140
+:106C40000A0007B22413000150B300408CE5000C89
+:106C50000000000D263900013331FFFF24F8002029
+:106C60000232382B10E00021AF98001C8F820014F4
+:106C70001440001E8F87001C3C0670003C0320005F
+:106C80008CE400000086282414A300188F85003CA3
+:106C9000000444023C0980000089802414A0FFEA1B
+:106CA000310600FF240A000210CA002E28CB000380
+:106CB00011600016240C000314D3FFE726390001ED
+:106CC000020028210E000700240400018F87001C09
+:106CD000AF82003C263900013331FFFF24F8002049
+:106CE0000232382B14E0FFE1AF98001C0220102183
+:106CF0008FBF00208FB3001C8FB200188FB100141B
+:106D00008FB0001003E0000827BD002810CC001A47
+:106D1000240D000414CDFFD026390001308EFFFF72
+:106D2000000E19C08F4401B80480FFFE3C0F100014
+:106D30003C102004AF430180AF400184AF50018874
+:106D4000AF4F01B80A0007AD263900010E0006F268
+:106D5000240400841600FFBF8F87001C0A0007ACC4
+:106D6000AF80003C020028210E0007000000202117
+:106D70000A0007CB8F87001C0E000740020020216D
+:106D80008F87001C0A0007CCAF82003C3082FFFFD7
+:106D90001440000300001821000424022403001002
+:106DA000308500FF14A000053087000F246600081E
+:106DB0000004220230C300FF3087000F14E00005FA
+:106DC000308900032468000400042102310300FF1D
+:106DD0003089000315200005388B0001246A000269
+:106DE00000042082314300FF388B00013164000130
+:106DF00010800002246C0001318300FF03E00008D2
+:106E000000601021308BFFFF000B394230E600FF9D
+:106E10003C09080025295BB8000640800109602173
+:106E20008D8700003164001F240A0001008A1804C5
+:106E300030A500FF00E3202514A000020003102766
+:106E400000E22024240F000100CF70040109682112
+:106E5000000E282714800005ADA400008F86000CCA
+:106E600000A6102403E00008AF82000C8F88000CFD
+:106E700001C8102503E00008AF82000C3C06001F8B
+:106E80003C0360003084FFFF34C5FF8024020020F3
+:106E9000AC602008AC60200CAC602010AC65201405
+:106EA000AC642018AC62200000000000000000006C
+:106EB00003E000080000000027BDFFE82402FFFFF8
+:106EC000AFBF0010AF82000C000020213C0608007C
+:106ED00024C65BB82405FFFF24890001000440801C
+:106EE0003124FFFF010618212C87002014E0FFFA4F
+:106EF000AC6500000E0008360000202124020001CD
+:106F00003C04600024050020AC822018AC852000E1
+:106F1000000000000000000000000000244A000102
+:106F20003142FFFF2C46040014C0FFF78FBF001052
+:106F300003E0000827BD00188F8300082C620400BE
+:106F400003E00008384200018F830008246200013A
+:106F500003E00008AF8200088F8300082462FFFF6F
+:106F600003E00008AF82000827BDFFE0AFB10014C6
+:106F7000AFBF0018AFB000108F6B00303C06600050
+:106F800000808821ACCB20088F6A002C3C02800056
+:106F900024030008ACCA200C9769003A97680038AF
+:106FA00000092C003107FFFF00A72025ACC42010EA
+:106FB000ACC22014ACC320000000000000000000A0
+:106FC000000000003C0360008C6D200031AC000824
+:106FD0001580FFF9000000008C6E201405C0002011
+:106FE000000000000E0007FA8F84000C00024080B1
+:106FF0003C09080025295BB8010938218CE4000010
+:107000000E0007FA00028140020220213090FFFFAB
+:10701000020020210E000818000028213C0C8000EE
+:10702000022C58253210FFFF3C116000240A00207A
+:10703000AE2B2014AE302018AE2A20000000000035
+:107040000000000000000000020010218FBF0018A7
+:107050008FB100148FB0001003E0000827BD00209E
+:107060008C6620143C02001F3443FF803C1FFFE865
+:1070700000C3C02437F9080003198021001079C229
+:107080003C0C8000022C582531F0FFFF3C116000C1
+:10709000240A0020AE2B2014AE302018AE2A200087
+:1070A00000000000000000000000000002001021AD
+:1070B0008FBF00188FB100148FB0001003E00008DC
+:1070C00027BD002027BDFFE8AFB000103402FFFF4E
+:1070D0003090FFFFAFBF0014120200060200202113
+:1070E0000E00083600000000020020210E000818E3
+:1070F000240500018F8400088FBF00148FB000109A
+:107100002483FFFF27BD001803E00008AF830008B9
+:10711000000439C230E6003F00043B42000718403B
+:10712000240210002CC4002024C8FFE0AF42002C31
+:10713000246300011480000330A900FF00071840F9
+:10714000310600FF0003608024080001019A5821E5
+:107150003C0A000E00C82804016A382111200005ED
+:10716000000530278CE900000125302503E00008E8
+:10717000ACE600008CEE000001C6682403E00008C5
+:10718000ACED000027BDFFE8AFBF0014AFB00010AA
+:107190003C0460008C8508083403F00030A2F00045
+:1071A00050430006240200018C8708083404E000E4
+:1071B00030E6F00010C4001E24020002AF8200403E
+:1071C0003C1060003C0A0200AE0A081424091000BA
+:1071D0003C08000E8E03440003482021AF49002CD8
+:1071E000240501200E000CE0000030218F830040B8
+:1071F000106000043C021691240B0001106B000E7D
+:107200003C023D6C344F0090AE0F44088FBF001419
+:107210008FB000103C0C6000240E10003C0D0200EA
+:1072200027BD0018AD8E442003E00008AD8D081086
+:107230000A000907AF8000403C0218DA344F009082
+:10724000AE0F44088FBF00148FB000103C0C6000DC
+:10725000240E10003C0D020027BD0018AD8E442006
+:1072600003E00008AD8D08100A0008DB24050001CA
+:107270000A0008DB000028213C08080025085FC43C
+:107280002404FFFF010018212402001E2442FFFFF6
+:10729000AC6400000441FFFD246300043C070800C7
+:1072A00024E760408CE5FFFC2404001C2406000158
+:1072B000308A001F01464804248400010009102779
+:1072C0002C8300201460FFFA00A22824ACE5FFFC08
+:1072D0003C05666634A4616E3C06080024C6610065
+:1072E000AF840058AF88009C2404FFFF00C0182121
+:1072F0002402001F2442FFFFAC6400000441FFFD94
+:10730000246300043C0766663C05080024A560C0B1
+:10731000AF86004834E6616EAF8600982404FFFF14
+:1073200000A018212402000F2442FFFFAC640000DB
+:107330000441FFFD246300043C0B66663C06080024
+:1073400024C660403568616EAF8500A4AF880070C8
+:107350002404FFFF00C018212402001F2442FFFF65
+:10736000AC6400000441FFFD246300043C0D66662C
+:107370003C0A0800254A618035AC616EAF860090FA
+:10738000AF8C005C2404FFFF01401821240200039D
+:107390002442FFFFAC6400000441FFFD24630004AD
+:1073A0003C090800252961908D27FFFC2404000674
+:1073B000240500013099001F0325C0042484000126
+:1073C000001878272C8E002015C0FFFA00EF382413
+:1073D000AD27FFFC3C09666624030400240403DC9B
+:1073E00024050200240600663522616E3C08080070
+:1073F00025085CC4AF820074AF830044AF83006C87
+:10740000AF830050AF830084AF8A008CAF840064E8
+:10741000AF85004CAF860054AF840078AF85006024
+:10742000AF86008001001821240200022442FFFFE1
+:10743000AC6000000441FFFD246300042404000349
+:107440002403000C3C0A0800254A5CD0AF8A00687F
+:107450000A0009AE2405FFFF0004188024840001FF
+:10746000006858212C8700C014E0FFFBAD650000C8
+:107470003C0E666635CD616E240C17A024081800FA
+:10748000AF8D0088AF8C009403E00008AF88007CCB
+:107490002484007F000421C200004021000030212C
+:1074A00000003821000028210A0009C5AF8400A08F
+:1074B0001060000624E7000100C4302124A500016B
+:1074C0002CC20BF51440FFFA2CA300663C090800FF
+:1074D0002529618001201821240200032442FFFF96
+:1074E000AC6000000441FFFD2463000410E0001ABA
+:1074F00024E3FFFF0003294210A0000A000020211E
+:107500002406FFFF3C0308002463618024840001FB
+:107510000085502BAC660000250800011540FFFBDC
+:107520002463000430E2001F104000080008688057
+:10753000240C0001004C38040008588001692821FF
+:1075400024E6FFFF03E00008ACA6000001A94021EB
+:107550002409FFFFAD09000003E00008000000005F
+:10756000AF4400283C04000C03442021000528827D
+:107570000A000CE000003021000421803C03600080
+:10758000AC6410080000000000052980AC65100CF8
+:107590000000000003E000088C62100C27BDFFE82B
+:1075A0000080282124040038AFBF00140E0009F524
+:1075B000AFB0001024040E00AF4400283C10000CB3
+:1075C00003502021240500100E000CE000003021A3
+:1075D00003501021AC400000AC40000424040038EB
+:1075E0008FBF00148FB0001024053FFF27BD001887
+:1075F0000A0009F58C430000000421803C03600070
+:10760000AC641008000000008C62100C03E000085D
+:107610000002118227BDFFC8AFB400208F9400681C
+:10762000AFBE0030AFB7002CAFB600280000B821C5
+:107630000080B021241E00C0AFBF0034AFB50024CD
+:10764000AFB3001CAFB20018AFB10014AFB0001060
+:107650000A000A32AFA5003C504000018F94006838
+:1076600027DEFFFF13C00028269400048E9200003E
+:107670003C03080024635FC01240FFF70283102B15
+:107680003C04080024845CC4028410230002A8C0C7
+:10769000000098210A000A412411000100118840CD
+:1076A000122000260000000002B38021025128248D
+:1076B0000200202110A0FFF9267300010E0009FE30
+:1076C000000000000016684032EC000101AC2021EF
+:1076D0000E0009F5020028218F89009426F7000189
+:1076E0008FA6003C3AEB0001316A00012528FFFF1C
+:1076F0000011382702CAB021AF88009416E6FFE7D0
+:1077000002479024AE92000002E010218FBF0034A7
+:107710008FBE00308FB7002C8FB600288FB50024A5
+:107720008FB400208FB3001C8FB200188FB10014EB
+:107730008FB0001003E0000827BD00383C0E0800A1
+:1077400025CE5FC0028E102B0A000A2DAE920000DB
+:1077500027BDFFD8AFB10014AFB00010AFBF0020FD
+:10776000AFB3001CAFB2001800A0882110A0001F0A
+:10777000000480403C13080026735CC40A000A7AA7
+:107780002412000112200019261000010E000A1513
+:1077900002002021000231422444FFA0000618808C
+:1077A0003045001F2C8217A1007318212631FFFFDE
+:1077B0001040FFF400B230048C6900000200202168
+:1077C00024053FFF012640241500FFEE0126382541
+:1077D0000E0009F5AC6700008F8A009426100001A6
+:1077E000254700011620FFE9AF8700948FBF0020D6
+:1077F0008FB3001C8FB200188FB100148FB000102F
+:1078000003E0000827BD00288F85009C00805821D8
+:107810000000402100004821240A001F3C0C080001
+:10782000258C603C3C0D080025AD5FC48CA6000093
+:1078300050C000140000402100AD1023000238C0E9
+:10784000240300010A000AB30000202115000003F0
+:1078500000E41021244820240000482125290001AB
+:10786000512B00132506DFDC106000062484000184
+:1078700000C3702415C0FFF5000318400A000AB1C8
+:107880000000402110AC002624A300040060282141
+:10789000254AFFFF1540FFE5AF85009C512B0004F2
+:1078A0002506DFDC0000402103E000080100102174
+:1078B0000006614230C5001F000C50803C070800E4
+:1078C00024E75FC424040001014730211120000F88
+:1078D00000A420043C05080024A560401480000595
+:1078E0002529FFFF24C6000410C500110000000078
+:1078F000240400018CCF00000004C02700042040B5
+:1079000001F868241520FFF5ACCD00008F990078B0
+:1079100001001021032B482303E00008AF89007801
+:107920003C05080024A55FC40A000ABB00004021F2
+:107930003C06080024C65FC40A000AD424040001DF
+:10794000308800FF240200021102000A2403000311
+:107950001103005C8F8900A4240400041104005F5B
+:1079600024050005110500670000182103E0000848
+:10797000006010218F8900483C0C0800258C6100B4
+:107980003C04080024846180240300201060000F60
+:1079900000005821240D0002240E00033C0F0800B3
+:1079A00025EF61008D27000014E0000B30F9FFFF88
+:1079B000252900040124C02B530000010180482127
+:1079C0002463FFFF5460FFF88D2700000160182139
+:1079D00003E0000800601021132000323C0500FF86
+:1079E00030E200FF004030211040004200005021F2
+:1079F00024050001000020210005C84000A6C02485
+:107A000017000003332500FF14A0FFFB24840001AE
+:107A1000012CC023001828C000AA6021008C50212E
+:107A20003144001F240C0001008C180400031027AF
+:107A300000E23024110D0041AD260000110E004C73
+:107A4000000A1840110D00368F87006C510E005649
+:107A50008F8C0060240D0004110D005A8F8E00845D
+:107A6000240E0005150EFFDA01601821240B1430D6
+:107A700011400006000018218F8400A0246300013B
+:107A8000006A402B1500FFFD016458218F8A008099
+:107A9000AF89008C016018212549FFFF0A000B0BFC
+:107AA000AF89008000E52024000736021080FFD057
+:107AB000240A001800075402314600FF0A000B1385
+:107AC000240A00103C0C0800258C60C03C0408000F
+:107AD000248461000A000AFA240300103C0C080008
+:107AE000258C60403C040800248460C00A000AF928
+:107AF0008F89009000071A02306600FF0A000B13FE
+:107B0000240A00088F89008C3C0C0800258C6180B9
+:107B10003C040800248461900A000AFA240300044B
+:107B2000000A4080250B003024E6FFFF0160182189
+:107B3000AF8900480A000B0BAF86006C000AC982AF
+:107B4000001978803C07080024E760C001E7202185
+:107B5000000A18428C8F00003079001F032C380473
+:107B60000007C02701F860240A000B28AC8C000035
+:107B7000000331420006288000AF28213062001F38
+:107B80008CB8000024630001004CC80400032142AB
+:107B9000001938270004108003073024004F2021EB
+:107BA0000A000B6CACA60000000A68C025AB0032CE
+:107BB000258AFFFF01601821AF8900A40A000B0B82
+:107BC000AF8A0060254B1030AF890090016018210A
+:107BD00025C9FFFF0A000B0BAF8900843086000720
+:107BE0002CC2000610400014000000000006408077
+:107BF0003C030800246359C8010338218CE40000C9
+:107C000000800008000000002409000310A9000EF5
+:107C100000000000240A000510AA000B000000006C
+:107C2000240B000110AB0008000000008F8C00A0A6
+:107C300010AC00050000000003E000080000102167
+:107C40000A000A9900A020210A000AE700C02021AA
+:107C500027BDFFE8308400FF240300021083000BDF
+:107C6000AFBF0010240600031086003A2408000469
+:107C700010880068240E0005108E007F2CAF143091
+:107C80008FBF001003E0000827BD00182CA20030B1
+:107C90001440FFFC8FBF001024A5FFD0000531C2A7
+:107CA000000668803C07080024E7610001A7302136
+:107CB0008CC900000005288230AC001F240B000195
+:107CC000018B50048F840048012A4025ACC8000075
+:107CD0008C83000050600001AF8600488F98006CD4
+:107CE00030AE000124A6FFFF270F000115C00002DF
+:107CF000AF8F006C24A600010006414200082080DE
+:107D0000008718218C79000030C2001F2406000172
+:107D10000046F804033F382410E0FFDA8FBF00105C
+:107D20000005C182001870803C0F080025EF60C07C
+:107D300001CF48218D2B00000005684231A5001FAE
+:107D400000A66004016C502527BD001803E0000860
+:107D5000AD2A00002CA7003014E0FFCA8FBF00102E
+:107D600030B900071723FFC724A8FFCE00086A0216
+:107D7000000D60803C0B0800256B60C0018B30213A
+:107D80008CC40000000828C230AA001F240800018B
+:107D9000014848048F8200A400891825ACC3000064
+:107DA0008C5F000053E00001AF8600A40005704026
+:107DB000000E7942000F28803C04080024846100F2
+:107DC00000A418218C6B000025DF000131CD001FBD
+:107DD000001F514201A86004016C4825000A108070
+:107DE000AC690000004428218CA600008F98006038
+:107DF00033F9001F8FBF00100328380400C778250F
+:107E0000270E000127BD0018ACAF000003E00008FA
+:107E1000AF8E006024A5EFD02CB804001300FF99AA
+:107E20008FBF001000053142000658803C0A080050
+:107E3000254A6040016A30218CC4000030A3001F35
+:107E400024090001006910048F9900900082F82530
+:107E5000ACDF00008F27000050E00001AF860090EB
+:107E60008F8D00848FBF001027BD001825AC000146
+:107E700003E00008AF8C008415E0FF828FBF001084
+:107E80008F8600A0000610400046F821001F210048
+:107E900003E4C8210019384024F8143000B8402BFE
+:107EA0001100FF788FBF001024A4EBD00E00020D4C
+:107EB00000C0282100027942000F70803C0D0800AC
+:107EC00025AD618001CD20218C8B0000304C001F3E
+:107ED00024060001018618048F89008C0163502557
+:107EE000AC8A00008D25000050A00001AF84008CFA
+:107EF0008F9800808FBF001027BD00182708000151
+:107F000003E00008AF88008030A5000724030003C9
+:107F100010A3001028A20004144000082407000247
+:107F20002403000410A300152408000510A8000F66
+:107F30008F8500A003E000080000000014A7FFFDEB
+:107F40000080282114C3FFFB240400020A000BABAD
+:107F500000000000240900050080282110C9FFFB53
+:107F60002404000303E000080000000014C5FFF132
+:107F7000008028210A000BAB24040005240A00011C
+:107F80000080282110CAFFF12404000403E0000847
+:107F90000000000027BDFFE0AFB00010000581C267
+:107FA0002603FFD024C5003F2C6223D024C6007FC7
+:107FB000AFB20018AFB10014AFBF001C309100FF8A
+:107FC000000691C20005298202002021104000080D
+:107FD0002403FFFF0E000A6B0000000002002021B6
+:107FE000022028210E000C590240302100001821E7
+:107FF0008FBF001C8FB200188FB100148FB000101B
+:108000000060102103E0000827BD002027BDFFD835
+:1080100024A2007FAFB3001CAFB20018000299C2C7
+:10802000309200FF24A3003F02402021026028215B
+:10803000AFB10014AFB00010AFBF00200E000B8E28
+:108040000003898200408021004020210220282155
+:1080500014400009000018218FBF00208FB3001CBE
+:108060008FB200188FB100148FB000100060102183
+:1080700003E0000827BD00280E000A1C00000000D5
+:1080800000402821020020211051FFF3001019C0E8
+:108090000E000A6B0000000002002021024028218F
+:1080A0000E000C59026030218FBF00208FB3001CDE
+:1080B0008FB200188FB100148FB00010000018218B
+:1080C0000060102103E0000827BD00283084FFFF76
+:1080D00030A5FFFF1080000700001821308200014A
+:1080E0001040000200042042006518211480FFFBAC
+:1080F0000005284003E000080060102110C00007C0
+:10810000000000008CA2000024C6FFFF24A500048C
+:10811000AC82000014C0FFFB2484000403E00008CC
+:108120000000000010A0000824A3FFFFAC860000A0
+:1081300000000000000000002402FFFF2463FFFF96
+:108140001462FFFA2484000403E000080000000029
+:1081500030A5FFFF8F4201B80440FFFE3C076015C9
+:1081600000A730253C031000AF440180AF400184DC
+:10817000AF46018803E00008AF4301B88F8500D007
+:108180002C864000008018218CA700840087102BCB
+:1081900014400010000000008CA800842D06400050
+:1081A00050C0000F240340008CAA0084008A482B92
+:1081B000512000018CA3008400035A42000B208050
+:1081C0003C05080024A55A400085182103E000085A
+:1081D0008C62000014C0FFF4000000002403400083
+:1081E00000035A42000B20803C05080024A55A4099
+:1081F0000085182103E000088C6200008F8300D006
+:10820000906600D024C50001A06500D08F8500D005
+:10821000906400D090A200D210440017000000002B
+:10822000936C00788F8B00BC318A00FFA16A000C30
+:1082300025490001938700C4312200FF3048007FA8
+:108240001107000B00026827A36200788F4E0178A7
+:1082500005C0FFFE8F9900B0241800023C0F1000EB
+:10826000AF590140A358014403E00008AF4F017823
+:108270000A000D2931A20080A0A000D00A000D1F25
+:108280000000000027BDFFD8AFB200188F9200B8E1
+:10829000AFBF0020AFB3001CAFB00010AFB10014EF
+:1082A0008F9300B48E5900283C1000803C0EFFEFE5
+:1082B000AE7900008E580024A260000A35CDFFFF81
+:1082C000AE7800049251002C3C0BFF9F356AFFFFF3
+:1082D000A271000C8E6F000C3C080040A271000BD4
+:1082E00001F06025018D4824012A382400E830255A
+:1082F000AE66000C8E450004AE6000183C0400FF22
+:10830000AE6500148E43002C3482FFFFA660000887
+:108310000062F824AE7F00108E5900088F9000B0E4
+:10832000964E0012AE7900208E51000C31D83FFFDE
+:1083300000187980AE7100248E4D001401F0602188
+:1083400031CB0001AE6D00288E4A0018000C41C2EE
+:10835000000B4B80AE6A002C8E46001C01093821B0
+:10836000A667001CAE660030964500028E440020D1
+:10837000A665001EAE6400349243003330620004F0
+:1083800054400005924600008F8300D08C7F007C13
+:10839000AE7F0030924600008F8500BCA0A6000092
+:1083A000924400333082000250400007924E000198
+:1083B0008F8700BC240AFF8090E90000012A402535
+:1083C000A0E80000924E00018F8D00BC2409FFBF81
+:1083D0002404FFDFA1AE00018F8A00BC914C000D88
+:1083E000318B007FA14B000D8F8600BC90C8000D23
+:1083F00001093824A0C7000D8F9100BC8E650014C0
+:108400009223000D2CA200010002F9400064C82450
+:10841000033FC025A238000D8F8800BC9650001283
+:108420008F8700D0A51000028E45000490ED00BC9F
+:1084300030AF0003000F702331CC000300AC1021DB
+:1084400031AB0002156000022444003424440030A3
+:1084500090F100BC00B18024320F000415E000024E
+:1084600024830004008018218F8900AC240A0002B4
+:10847000AD030004A12A00009248003F8F8700ACA2
+:10848000A0E800018F9100AC9246003F8E440004AA
+:10849000A62600029765003C0E000CF630B0FFFFE8
+:1084A00000021380005020253C0342000083F82581
+:1084B000AE3F00048F8500AC8E590038ACB900186F
+:1084C0008E580034ACB8001CACA0000CACA000105E
+:1084D000A4A00014A4A00016A4A00020A4A0002220
+:1084E000ACA000248E620014504000012402000160
+:1084F0008FBF00208FB3001C8FB200188FB1001403
+:108500008FB00010ACA200080A000D1627BD00288D
+:108510008F8600D027BDFFD0AFBF002CAFB600289C
+:10852000AFB50024AFB40020AFB3001CAFB2001849
+:10853000AFB10014AFB0001094C300E094C200E2E9
+:10854000104300412405FFFF3C16000E90C400D0EC
+:1085500090C800D1309200FF310400FF0244382B54
+:1085600010E0004426490001108900378F9800B0C0
+:108570003C0508008CA5005C2414FF8000B8602135
+:1085800001946824AF4D002C94CA00E2318B007F27
+:10859000017A482131447FFF013640210004104018
+:1085A0000048A82196A700003C1F08008FFF005834
+:1085B00030F53FFF0015198003E3C8210319882116
+:1085C0003233007F027A782102348024AF50002CAD
+:1085D00001F69821926E000D31C5000410A00048EC
+:1085E0000000000094C300E294C300E294D800E2CB
+:1085F00024048000307F7FFF27F9000133317FFFA3
+:108600000304802402117825A4CF00E294CE00E276
+:108610003C1208008E52006031D47FFF129200DFBE
+:10862000000000008E720018000028212646FFFF7F
+:10863000AE66002C8F8600D094C800E094C900E29A
+:108640001528FFC2000000008FBF002C8FB6002845
+:108650008FB500248FB400208FB3001C8FB2001898
+:108660008FB100148FB0001000A0102103E00008AB
+:1086700027BD003090CD00D2264A000131AC00FF6A
+:10868000008C5821116AFFF08F9800B03C0508005B
+:108690008CA5005C2414FF8000B86021019468243C
+:1086A000AF4D002C94CA00E2318B007F017A482143
+:1086B00031447FFF01364021000410400048A821CA
+:1086C00096A700003C1F08008FFF005830F53FFFC1
+:1086D0000015198003E3C821031988213233007F74
+:1086E000027A782102348024AF50002C01F69821C0
+:1086F000926E000D31C5000414A0FFBA0000000006
+:108700008E6600100012C0C08E6E003000129140C4
+:1087100002587821036F582100CE6823256C008809
+:1087200024020002AE6D0010AF8C00ACA162008884
+:10873000976A003C8E6400308F9100AC0E000CF6FE
+:108740003150FFFF00022380009048253C03420087
+:1087500001234025AE2800048E6700048F8C00ACF6
+:108760008E7F0000240D0008AD87001CAD9F00180F
+:10877000AD80000CAD8000109265000A30B900FF9A
+:10878000A5990014967800083C05000CA5980016E1
+:108790009271000A322F00FFA58F0020967000080A
+:1087A00024110005A5900022AD800024926E000BDC
+:1087B0002410C00031C600FFA5860002A18D000173
+:1087C0008E6B00308F8200AC8F8800B0AC4B0008FD
+:1087D0003C0A08008D4A0054014820210094482496
+:1087E000AF4900283C0308008C630054006838211E
+:1087F00030FF007F03FAC8210325C02102587821E9
+:10880000AF8F00BCAF9800C0A1F100008F8B00BCFF
+:108810002403FFBF2405FFDF956E000201D0A024D2
+:1088200002959025A57200029166000230CD003FAE
+:1088300035AC0040A16C00028F8800BC8F8200D054
+:108840003C0C7FFFAD0000048C4A007C358BFFFFA1
+:108850003C028000AD0A00089104000D3089007FC1
+:10886000A109000D8F9F00BC93F5000D02A33824D1
+:10887000A3E7000D8F9100BC9239000D0325C024A1
+:10888000A238000D8E6F00348F8D00BCADAF00108C
+:108890008E6E002C8E70003001D0A023ADB4001479
+:1088A00091B200183246007FA1A600188F8700BC45
+:1088B0008E6A00308CE40018014B4824008240246A
+:1088C0000109A825ACF500189263000AA0E3001C7A
+:1088D000967F00088F8500BC8F9900D0A4BF001E32
+:1088E0008E7000308E6400300E00020D8F250084E3
+:1088F0008F8500D0000289400002C10090AE00BC0C
+:10890000023878210040302131D400021280000367
+:10891000020F80210002A8800215802190B200BCC5
+:1089200032540004128000020006C880021980211F
+:108930008E6F00308F8B00BC2406800031EE000368
+:10894000000E682331AC0003020C1021AD6200045C
+:1089500094A400E294AA00E294A300E231507FFFC5
+:108960002604000130897FFF006640240109882524
+:10897000A4B100E294A700E23C1308008E730060EB
+:1089800030FF7FFF13F30012000000000E000D16F1
+:10899000000000000A000E240000282194CD00E20F
+:1089A00001A46024A4CC00E290CB00E290C200E2DB
+:1089B000316A00FF000A49C200092027000441C0B3
+:1089C0003055007F02A838250A000E20A0C700E21B
+:1089D00094B100E202263824A4A700E290BF00E28E
+:1089E00090B400E233F300FF0013C9C200199027CE
+:1089F0003298007F0012A9C0031530250E000D1615
+:108A0000A0A600E20A000E24000028213084FFFF07
+:108A100030A5FFFFAF440018AF45001C03E000087D
+:108A20008F42001427BDFFB0AFB000288F9000D058
+:108A3000AFB40038AFBF004CAFBE0048AFB7004482
+:108A4000AFB60040AFB5003CAFB30034AFB20030BA
+:108A5000AFB1002CA7A00014920600D1920500D05F
+:108A60003094FFFF30C400FF30A300FF0064102BE0
+:108A7000A7A0001E10400071AFA00010920900D006
+:108A80000014982B312800FF0088382324F2FFFFC0
+:108A90000012882B0233782451E000758FB2001049
+:108AA00096180012961900100014F4000319B82348
+:108AB0000017B400001614030282A82A16A00002B0
+:108AC000001E2403004020210244F82B13E0000282
+:108AD00000801821024018210003340000061C0306
+:108AE0003065FFFF2CA200091440000200609821AD
+:108AF000241300088E090008001359808E08000C0A
+:108B00003164FFFF3C0A0010008A3825274A040020
+:108B1000AF490038AF8A00B8AF48003CAF470030DB
+:108B20000000000000000000000000000000000045
+:108B30000000000000000000000000000000000035
+:108B40008F4D000031AC00201180FFFD0013702A12
+:108B500001D110240000A821104001C00000000035
+:108B60008F9800B03C0B08008D6B00542411FF80DF
+:108B7000921E00D00178202100911024921900D07B
+:108B8000AF4200288D4500103C0608008CC60058F6
+:108B90003C1708008EF7005430A73FFF00071980EC
+:108BA00000C34021030820210091F824920B00D03B
+:108BB000AF5F002C9148000033D600FF332F00FF39
+:108BC00002F8702100166140000F68C031C9007FB3
+:108BD000018D3821013A2821316300FF3086007F62
+:108BE0003C02000C00A2B021000389400367C821A9
+:108BF00000DAF8213108003F3C1E000E0236B82191
+:108C00002738008803FE88212D0F0008AF9800AC9C
+:108C1000AF9700BCAF9600C011E0018FAF9100B4D8
+:108C2000000868803C0E080025CE59E001AE6021A6
+:108C30008D8900000120000800000000920E00D283
+:108C4000920D00D00014982B31CA00FF31AC00FF08
+:108C5000008C5823014B20212492FFFF0012882B07
+:108C60000233782415E0FF8E000000008FB2001060
+:108C70008FBF004C8FBE00483A4200018FB70044BE
+:108C80008FB600408FB5003C8FB400388FB30034EE
+:108C90008FB200308FB1002C8FB0002803E00008A5
+:108CA00027BD0050915800013317002012E0020444
+:108CB00024160001921F00BC0000B02133F900010E
+:108CC0001320000D241E00018D4800148E03008423
+:108CD0000103B02B16C00002010030218E06008473
+:108CE0008E05006400C5382B14E0000200C020216E
+:108CF0008E0400640080B0218D4200148E0B00644D
+:108D0000004B302B14C00002004020218E04006470
+:108D10000096B82356E00001241E0002025E202BBC
+:108D200014800148000018218D5900388E2F000C46
+:108D30003C180080AE3900008D5000343C0EFF9F7F
+:108D400001F86025AE3000049149003F35CDFFFFAA
+:108D5000018D20243C0A00203C0BFFEFA229000BD0
+:108D6000008A38253562FFFF00E228243C0600080F
+:108D70008F8700B800A6C825AE39000C8CE300141C
+:108D8000AE2000183C08FFFBAE2300148CF800183E
+:108D9000351FFFFF033F7024AE38001C8CEF000826
+:108DA00002D78021AE2F00248CED000CAE30002CB9
+:108DB000AE2E000CAE2D0020AE200028A6200038DC
+:108DC000A620003A8CEC001401964823013750236A
+:108DD00011400011AE2A001090EE003D8E2C0004D0
+:108DE0008E240000000E6900018D28210000502112
+:108DF00000AD302B008A582101661021AE250004F9
+:108E0000AE22000090E3003DA223000A8F8800B844
+:108E1000951F0006A63F00088F8B00AC24060002B9
+:108E200002C02021A16600009765003C8F9000AC35
+:108E300030A2FFFF0E000CF6AFA200208FA300208F
+:108E4000000243808F8500B80103C8253C1F420003
+:108E5000033FC025AE1800048F8400AC8CAF0038EF
+:108E6000AC8F00188CB00034AC90001CAC80000CAF
+:108E7000AC800010A4800014A4800016A480002000
+:108E8000A4800022AC80002490A7003FA4870002A9
+:108E900012C00210240D000152E0000290A2003D19
+:108EA00090A2003E244A0001A08A00018F8400ACF9
+:108EB000AC9600088F8300D024070034906F00BC6C
+:108EC00031EE000251C00001240700308F8200B84B
+:108ED0008F9900BC906800BC905F000024100004D3
+:108EE00032CF0003A33F00008F9800B88F8C00BCE6
+:108EF000020F7023930D00012405C00031CA000346
+:108F0000A18D00018F9000BC8F8900B800F6382138
+:108F1000960400029526001200EA382100855824A4
+:108F200030C33FFF01631025A6020002921F00021A
+:108F30003108000433F9003F37380040A21800021E
+:108F400012C000028F8500BC00E838218F8600D057
+:108F5000ACA70004241FFFBF8CC3007C2ECB0001F4
+:108F6000240FFFDFACA3000890A8000D000B6940A0
+:108F70003102007FA0A2000D8F9000BC9219000D5D
+:108F8000033FC024A218000D8F8A00BC914E000D33
+:108F900001CF6024018D4825A149000D8F8600B8BE
+:108FA0008F8B00BC8CC70020AD6700108CC50024DF
+:108FB000AD6500148CC40028AD6400188CC3002C6F
+:108FC0000E000D16AD63001C2408000257C8009C5B
+:108FD0008F9000D08F8F00D08F8A00C002E02021B8
+:108FE00091E800D091EB00D091E700D0311000FF64
+:108FF000316E00FF00106940000E28C001A5182145
+:1090000030E900FF0363C8210009314000CAF8219C
+:1090100027220088AF8200ACAF9F00BCA33E00882F
+:109020000E000CF68F9000AC8FB800200002638019
+:109030003C0F4200019840258F8C00B8010F582545
+:10904000AE0B00048D8400388F8B00AC000028210B
+:1090500000053900AD6400188D8E00343C0F7FFF91
+:1090600035E8FFFFAD6E001C9183003E8D69001C4A
+:109070008D6600180003510000036F02012AC02111
+:1090800000ED1025030AF82B00C2C821033F802100
+:10909000AD78001CAD700018AD60000CAD60001024
+:1090A0009184003E241F00052410C000A564001414
+:1090B000958E000402E8402402E02021A56E0016EF
+:1090C0009185003EA5650020958D0004A56D0022C8
+:1090D000AD6000249187003FA56700029183003EA8
+:1090E0009189003D0123502325460001A16600011E
+:1090F0008F8200AC8F9900BCAC570008A33F0000E2
+:109100008F8A00BC8F9800B8954F0002970E00120E
+:109110002418FFBF020F682431C53FFF01A5382581
+:10912000A5470002914C00022405FFDF3189003F72
+:1091300035230040A14300028F9900BC8F8600D0E8
+:109140002409FFFFAF2000048CCB007C2403FF80A8
+:10915000AF2B00089322000D3C0B8000305F007F96
+:10916000A33F000D8F8E00BC91D0000D0218782413
+:10917000A1CF000D8F8C00BC918D000D01A538246E
+:10918000A187000D8F8600BCACC90010ACD60014BE
+:1091900090CA00180143B025A0D600188F8F00BCDC
+:1091A0008F9800B88DE20018004BF82403E8C8251A
+:1091B000ADF900189310003EA1F0001C8F8E00B88E
+:1091C0008F8D00BC8F8700D095C50004A5A5001E1B
+:1091D0000E00020D8CE500848F8700D000026140F4
+:1091E0000002210090EA00BC0184482100402821AF
+:1091F0003156000212C0000302E930210002B080A3
+:1092000000D6302190EC00BC3184000410800003B3
+:1092100032EA00030005C08000D830212409000490
+:109220008F9700BC012A1023305F000300DFC821A4
+:10923000AEF900040E000D16A62500388F9000D060
+:1092400003C01821146000020060B02100009021CA
+:1092500056C000868F9700B80012882B9609001020
+:10926000029550233C14002002A91021A6020010F0
+:10927000AF5400303154FFFF00000000961300107F
+:10928000961F001213F30011000000008E17000C4F
+:109290008E0C00080015C98002F94021001927C36F
+:1092A0000119B02B0184782101F65821AE08000C79
+:1092B000AE0B00080014A82B023580241200FE6BB0
+:1092C0008F9000D00A000F3F00000000960B0014A2
+:1092D0008E0500043163FFFF000370C000AE38212B
+:1092E000AF47003C8E0600048F4D003C00CDF023BC
+:1092F0001BC00036000000008E080000250200019F
+:109300003C16001036CF0008AF420038AF4F003097
+:10931000000000000000000000000000000000004D
+:10932000000000000000000000000000000000003D
+:109330008F440000308C00201180FFFD00000000F1
+:109340008F5904003C170020AE1900088F55040403
+:10935000AE15000CAF570030000000003C060800BE
+:109360008CC600442418000110D800D3000000006F
+:10937000960700123C0508008CA5004000A7682154
+:10938000A60D0012961E001427C90001A60900149C
+:10939000960200143044FFFF5486FFC70014A82B28
+:1093A00030A5FFFF0E000F1AA60000143C030800B2
+:1093B0008C630024960500120043702300AE302316
+:1093C000A60600120A0011450014A82B8E02000008
+:1093D0000A0011583C16001091560001241000019B
+:1093E0000016784215F0001C97A8001E8D5F00142F
+:1093F0002411C00033FE3FFF0111C8243C180800AF
+:109400008F180060033EB82532E53FFF00B8502BAF
+:1094100011400011A7B7001E3C1008008E10005824
+:109420008F8F00B000057180240CFF80020F68212F
+:1094300001AE48213124007F012C5824009A2821B4
+:109440003C02000EAF4B002C00A2302190C7000D53
+:1094500034E30004A0C3000D0E000D38000000002E
+:109460008F9000D0240300018F9700B826B9000127
+:109470000019AC00024390230015AC0326F800400D
+:1094800002B3202A0012882B240C00010300502173
+:1094900000911024AF9800B80A000F6DAFAC001017
+:1094A000955600128F8400B032C5FFFF0E000CEB02
+:1094B000A7B600148F9000D00A0011B10000182147
+:1094C0008D590038A620000824040003AE3900009E
+:1094D0008D570034A220000A8F9800B8AE370004E0
+:1094E0003C0F0080930C003FA224000C8E28000C3F
+:1094F0003C0BFF9FA22C000B010F1825356EFFFFC0
+:109500003C05FFEF8F9700B8006E682434A7FFFF7B
+:1095100001A73024AE26000C8EFE001496FF001228
+:109520008F8200B0AE3E00108EF00014AE20001806
+:10953000AE200020AE300014AE2000248EE90018CA
+:1095400033F03FFF00105180AE2900288EF900084B
+:109550000142C02133EC0001AE3900308EEB000C2B
+:109560008F8500AC001879C2000C238001E44021F3
+:10957000240E0002A628001CA6200036AE2B002CCC
+:10958000A0AE00009767003C8F8A00AC3C0342000D
+:1095900030EDFFFF01A33025AD4600048F9E00B8DB
+:1095A000240200012408C0008FD1003824060034B2
+:1095B000AD5100188FC90034AD49001CAD40000CFE
+:1095C000AD400010A5400014A5400016A5400020A5
+:1095D000A5400022AD400024A5560002A142000192
+:1095E0008F9F00AC8F9900B88F9800BCAFF6000831
+:1095F00093370000A31700008F8C00B88F8F00BC3A
+:1096000091840001A1E400018F8D00BC95AB0002A4
+:109610000168702401D02825A5A5000291A70002A9
+:1096200030E3003FA1A300028F8300D08F8400BCF1
+:10963000907100BC323E000253C00001240600308D
+:10964000AC8600048C6F007C2403FFBFAC8F000845
+:109650009088000D310B007FA08B000D8F8700BC20
+:1096600090EE000D01C32824A0E5000D8F9E00BCE4
+:1096700093CD000D35A60020A3C6000D8F8A00B83B
+:109680008F9100BC8D500020AE3000108D49002419
+:10969000AE2900148D420028AE2200188D5F002CE8
+:1096A000AE3F001C0E000D16000000008F9000D091
+:1096B0000A00112B02C01821960A00123C1F080054
+:1096C0008FFF002403EA9821A61300120A00114517
+:1096D0000014A82BA08D00018F8900AC240C000180
+:1096E000AD2C00080A0010458F8300D027BDFFE095
+:1096F0003C1808008F180050AFB00010AFBF001822
+:10970000AFB10014AF8400B09371007403047821EA
+:109710002410FF8031EE007F3225007F01F05824B5
+:1097200001DA68213C0C000AA38500C401AC2821A1
+:10973000AF4B002494A900109768000690A6006221
+:1097400000803821240200300109202330C300F0BA
+:10975000AF8500D0106200193090FFFF90AE00621C
+:10976000240DFFF0240A005001AE6024318B00FF6D
+:10977000116A002F0000000016000007241F0C00D3
+:10978000AF5F00248FB100148FBF00188FB000109E
+:1097900003E0000827BD00200E000F20020020215A
+:1097A000241F0C00AF5F00248FB100148FBF00187E
+:1097B0008FB0001003E0000827BD002094A200E055
+:1097C00094A400E290BF0113008218263079FFFFB5
+:1097D00033E700C014E000092F3100011600003803
+:1097E000000000005620FFE6241F0C000E000DDBD9
+:1097F000000000000A001277241F0C001620FFDE74
+:10980000000000000E000DDB000000001440FFDC33
+:10981000241F0C00160000228F8300D090690113D2
+:109820003122003FA06201130A001277241F0C00AE
+:1098300094AF00D48F8600D400E0282124040005D2
+:109840000E000C7C31F0FFFF1440000524030003E0
+:10985000979100E6000018212625FFFFA78500E666
+:109860008F5801B80700FFFE3C196013AF4001801C
+:10987000241F0C00AF500184007938253C101000E3
+:10988000AF4701888FB10014AF5001B8AF5F00241B
+:109890008FB000108FBF001803E0000827BD002024
+:1098A0000E000F20020020215040FFB5241F0C00A5
+:1098B0008F8300D0906901130A0012A03122003F6B
+:1098C0000E000F20020020211440FFAD241F0C00C9
+:1098D000122000078F8300D0906801133106003FEB
+:1098E00034C20040A06201130A001277241F0C004A
+:1098F0000E000DDB000000005040FFA1241F0C00F3
+:109900008F8300D0906801133106003F0A0012D007
+:1099100034C20040AF9B00C803E00008AF8000ECF9
+:109920003089FFFF000940422D02004100092980D3
+:10993000144000020009504024080040000879400B
+:109940000008C0C001F85821256701A800EF702168
+:1099500025CC007F240DFF80018D18240065302167
+:1099600000CA282125640088240A00883C010800D8
+:10997000AC2A004C3C010800AC240050AF8500D458
+:109980003C010800AC2900603C010800AC280064E0
+:109990003C010800AC2700543C010800AC230058EF
+:1099A0003C010800AC26005C03E000080000000059
+:1099B000308300FF30C6FFFF30E400FF8F4201B864
+:1099C0000440FFFE00034C00012438253C086000E1
+:1099D00000E820253C031000AF450180AF4601841C
+:1099E000AF44018803E00008AF4301B88F86001C34
+:1099F0003C096012352700108CCB00043C0C600E33
+:109A000035850010316A00062D480001ACE800C41D
+:109A10008CC40004ACA431808CC2000894C3000242
+:109A2000ACA2318403E00008A78300E43C030800F3
+:109A30008C6300508F8400E88F86001C2402FF8016
+:109A40000064C0210302C824AF5900288CCD000453
+:109A50003305007F00BA78213C0E000C01EE28216E
+:109A6000ACAD00588CC80008AF8500D03C07601230
+:109A7000ACA8005C8CCC001034E80010ACAC000C3E
+:109A80008CCB000CACAB000894AA00143C0208007C
+:109A90008C42004425490001A4A9001494A4001498
+:109AA0003083FFFF106200178F8400D03C0A08004B
+:109AB0008D4A0040A4AA00128CCE0018AC8E00245F
+:109AC0008CCD0014AC8D00208CC70018AC87002C06
+:109AD0008CCC001424060001AC8C00288D0B00BC3B
+:109AE0005166001A8D0200B48D0200B8A482003ABB
+:109AF000948F003AA48F003C948800D403E00008BF
+:109B00003102FFFF3C0908008D290024A4A00014A5
+:109B10008F8400D0A4A900128CCE0018AC8E002433
+:109B20008CCD0014AC8D00208CC70018AC87002CA5
+:109B30008CCC001424060001AC8C00288D0B00BCDA
+:109B40005566FFEA8D0200B88D0200B4A482003A87
+:109B5000948F003AA48F003C948800D403E000085E
+:109B60003102FFFF8F86001C3C0C08008D8C0050DA
+:109B7000240BFF808CCD00083C03000C000D51C06D
+:109B8000018A4021010B4824AF8A00E8AF49002830
+:109B900090C700073105007F00BA1021004328213B
+:109BA00030E400041080002FAF8500D090CF000774
+:109BB00031EE000811C0003C000000008CD9000C00
+:109BC0008CC400140324C02B1300002600000000E6
+:109BD0008CC2000CACA200648CCD00182402FFF8EB
+:109BE000ACAD00688CCC0010ACAC00808CCB000C11
+:109BF000ACAB00848CCA001CACAA007C90A900BC51
+:109C000001224024A0A800BC90C3000730670008D0
+:109C100010E000048F8500D090AF00BC35EE00014D
+:109C2000A0AE00BC90D90007333800011300000F2C
+:109C30008F8400D024070020908200BC34490002A9
+:109C4000A08900BC8F8400D090880062310300F0AE
+:109C500014670006240A0034AC8A00C00A0013B25C
+:109C6000000000000A00138C8CC2001490CB000787
+:109C70003166000210C0000500000000908D00BC9D
+:109C800035AC0004A08C00BC8F8400D090980113E8
+:109C9000330F003FA08F01138F8E00D095C500D4E5
+:109CA00003E0000830A2FFFFACA000640A00138D9F
+:109CB0000000000027BDFFD8AFB000108F90001C3F
+:109CC000AFBF0024AFB40020AFB20018AFB1001492
+:109CD000AFB3001C9613000E3C07600A3C146006EC
+:109CE0003264FFFF369300100E0012DF34F40410CC
+:109CF0008F8400D43C11600E0E0009BB3631001079
+:109D0000920E00153C0708008CE700603C126012C0
+:109D100031CD000FA38D00F08E0E00048E0D0008D3
+:109D200096080012961F00109619001A9618001E29
+:109D3000960F001C310CFFFF33EBFFFF332AFFFFB0
+:109D40003309FFFF31E6FFFF3C010800AC2B004068
+:109D50003C010800AC2C00243C010800AC2A004463
+:109D6000AE293178AE26317C92020015960300169A
+:109D700036520010304400FF3065FFFF3C060800FB
+:109D80008CC60064AE243188AE4500B4920800143D
+:109D900096190018241F0001011FC004332FFFFF74
+:109DA0003C0508008CA50058AE5800B8AE4F00BC6A
+:109DB000920C0014AF8E00D8AF8D00DC318B00FF09
+:109DC000AE4B00C0920A0015AE670048AE66004C6C
+:109DD000314900FFAE4900C8AE65007C3C03080075
+:109DE0008C6300503C0408008C84004C3C08080044
+:109DF0008D0800543C0208008C42005C8FBF002498
+:109E0000AE6300808FB00010AE8300748FB3001C6F
+:109E1000AE22319CAE4200DCAE2731A0AE2631A48A
+:109E2000AE24318CAE233190AE283194AE253198DA
+:109E3000AE870050AE860054AE8500708FB100141E
+:109E4000AE4700E0AE4600E4AE4400CCAE4300D0E6
+:109E5000AE4800D4AE4500D88FB400208FB20018B1
+:109E600003E0000827BD002827BDFFE0AFB10014C4
+:109E7000AFBF0018241100010E000865AFB000103C
+:109E800010510005978400E6978300CC0083102BC7
+:109E9000144000088F8500D4240700028FBF0018EB
+:109EA0008FB100148FB0001000E0102103E0000813
+:109EB00027BD00200E000C9A24040005AF8200E8A4
+:109EC0001040FFF6240700020E0008698F90001C66
+:109ED000979F00E68F9900E88F8D00C827EF00015B
+:109EE000240E0050AF590020A78F00E6A1AE00005D
+:109EF0003C0C08008D8C00648F8600C8240A80000A
+:109F0000000C5E00ACCB0074A4C0000694C9000A2B
+:109F1000241FFF803C0D000C012AC024A4D8000A95
+:109F200090C8000A24182000011F1825A0C3000AA9
+:109F30008F8700C8A0E000788F8500C80000382116
+:109F4000A0A000833C0208008C4200508F8400E8EF
+:109F50000044782101FFC824AF590028960B000265
+:109F600031EE007F01DA6021018D3021A4CB00D4D5
+:109F7000960A0002AF8600D03C0E00042549240159
+:109F8000A4C900E68E080004ACC800048E030008D3
+:109F9000ACC30000A4C00010A4C00014A0C000D036
+:109FA0008F8500D02403FFBFA0A000D13C0408008F
+:109FB0008C8400648F8200D0A04400D28E1F000CDD
+:109FC0008F8A00D0978F00E4AD5F001C8E190010BF
+:109FD00024100030AD590018A5400030A5510054A0
+:109FE000A5510056A54F0016AD4E0068AD58008033
+:109FF000AD580084914D006231AC000F358B0010DC
+:10A00000A14B00628F8600D090C900633128007F89
+:10A01000A0C800638F8400D02406FFFF90850063F2
+:10A0200000A31024A08200638F9100D000E01021D3
+:10A03000923F00BC37F90001A23900BC8F8A00D0E2
+:10A04000938F00F0AD580064AD5000C0914E00D326
+:10A05000000F690031CC000F018D5825A14B00D3B2
+:10A060008F8500D08F8900DCACA900E88F8800D8EC
+:10A070008FBF00188FB100148FB0001027BD0020D3
+:10A08000ACA800ECA4A600D6A4A000E0A4A000E226
+:10A0900003E000080000000027BDFFE0AFB00010A3
+:10A0A0008F90001CAFB10014AFBF00188E190004D0
+:10A0B0003C1808008F180050240FFF80001989C039
+:10A0C0000238702131CD007F01CF602401BA5021C8
+:10A0D0003C0B000CAF4C0028014B4021950900D4EB
+:10A0E000950400D68E0700043131FFFFAF8800D001
+:10A0F0000E000933000721C08E0600048F8300C8BC
+:10A10000000629C0AF4500209064003E3082004028
+:10A11000144000068F8400D0341FFFFF948300D6C4
+:10A120003062FFFF145F000400000000948400D63A
+:10A130000E0008C83084FFFF8E0500040220302185
+:10A140008FBF00188FB100148FB0001024040022BC
+:10A1500000003821000529C00A00130327BD002094
+:10A1600027BDFFE0AFB100143091FFFFAFB000108A
+:10A17000AFBF00181220001D000080218F86001C38
+:10A180008CC500002403000600053F0200051402F0
+:10A1900030E4000714830015304500FF2CA80006AA
+:10A1A0001100004D000558803C0C0800258C5A0019
+:10A1B000016C50218D4900000120000800000000C2
+:10A1C0008F8E00EC240D000111CD0059000000001D
+:10A1D000260B00013170FFFF24CA00200211202B42
+:10A1E000014030211480FFE6AF8A001C02001021DC
+:10A1F0008FBF00188FB100148FB0001003E000086B
+:10A2000027BD0020938700CE14E0003824040014FA
+:10A210000E0013C4000000008F86001C2402000101
+:10A220000A00150BAF8200EC8F8900EC24080002B5
+:10A230001128003B240400130000282100003021D5
+:10A24000240700010E001303000000000A00150B94
+:10A250008F86001C8F8700EC2405000214E5FFF6B2
+:10A26000240400120E001370000000008F8500E827
+:10A2700000403021240400120E0013030000382196
+:10A280000A00150B8F86001C8F8300EC241F00032F
+:10A29000147FFFD0260B00010E00132200000000E7
+:10A2A0008F8500E8004030212402000224040010C1
+:10A2B00000003821AF8200EC0E0013030000000004
+:10A2C0000A00150B8F86001C8F8F00EC24060002FD
+:10A2D00011E6000B000000002404001000002821FB
+:10A2E000000030210A001528240700010000282161
+:10A2F0000E001303000030210A00150B8F86001C8E
+:10A300000E00143100000000144000128F99001C50
+:10A310008F86001C240200030A00150BAF8200EC9C
+:10A320000E0014BD000000000A00150B8F86001CF3
+:10A330000E00131200000000240200022404001486
+:10A340000000282100003021000038210A001545B6
+:10A35000AF8200EC0040382124040010973800023E
+:10A36000000028210E0013033306FFFF0A00150B1F
+:10A370008F86001C8F8400C83C077FFF34E6FFFFF8
+:10A380008C8500742402000100A61824AC8300749C
+:10A3900003E00008A082000510A000362CA2008077
+:10A3A000274A04003C0B00052409008010400007E8
+:10A3B0002408008030A6000F00C540212D03008135
+:10A3C0001460000200A0482124080080AF4B003038
+:10A3D0000000000000000000000000001100000963
+:10A3E00000003821014030218C8D000024E700045A
+:10A3F00000E8602BACCD0000248400041580FFFA37
+:10A4000024C600040000000000000000000000005E
+:10A410003C0E0006010E3825AF470030000000005A
+:10A4200000000000000000008F4F000031E8001025
+:10A430001100FFFD000000008F42003C8F43003CF4
+:10A440000049C8210323C02B1300000400000000B2
+:10A450008F4C003825860001AF4600388F47003CFE
+:10A4600000A9282300E96821AF4D003C14A0FFCECD
+:10A470002CA2008003E000080000000027BDFFD0F0
+:10A480003C020002AFB100143C11000CAF45003893
+:10A49000AFB3001CAF46003C00809821AF420030B3
+:10A4A00024050088AF44002803512021AFBF0028B5
+:10A4B000AFB50024AFB40020AFB200180E00157D78
+:10A4C000AFB000103C1F08008FFF004C3C18080084
+:10A4D0008F1800642410FF8003F3A82132B9007F95
+:10A4E00002B078240018A0C0033A702100189140EF
+:10A4F00001D12021AF4F00280E00157D02542821E4
+:10A500003C0D08008DAD00502405012001B35821F9
+:10A51000316C007F01705024019A482101312021C3
+:10A520000E00157DAF4A00283C0808008D08005435
+:10A530003C0508008CA500640113382130E6007F3B
+:10A5400000F0182400DA202100912021AF430028D8
+:10A550000E00157D000529403C0208008C42005881
+:10A560003C1008008E1000601200001C005388216F
+:10A570002415FF800A0016003C14000C3226007FD0
+:10A580000235182400DA202102402821AF43002898
+:10A59000009420210E00157D2610FFC01200000F30
+:10A5A000023288212E05004110A0FFF42412100071
+:10A5B0003226007F001091800235182400DA202115
+:10A5C00002402821AF430028009420210E00157D71
+:10A5D000000080211600FFF3023288213C0B0800A6
+:10A5E0008D6B005C240AFF8024050002017340216A
+:10A5F000010A4824AF4900283C0408009484006202
+:10A600003110007F021A88213C07000C0E000CCA92
+:10A610000227982100402821026020218FBF0028B6
+:10A620008FB500248FB400208FB3001C8FB20018A8
+:10A630008FB100148FB000100A00157D27BD0030C7
+:10A640008F83001C8C620004104000030000000097
+:10A6500003E00008000000008C6400108C65000816
+:08A660000A0015B68C66000C1F
+:08A66800000000000000001BCF
+:10A670000000000F0000000A0000000800000006B3
+:10A6800000000005000000050000000400000004B8
+:10A6900000000003000000030000000300000003AE
+:10A6A00000000003000000020000000200000002A1
+:10A6B0000000000200000002000000020000000292
+:10A6C0000000000200000002000000020000000282
+:10A6D0000000000200000002000000020000000272
+:0CA6E0000000000100000001000000016B
+:04A6EC0008000F58FB
+:10A6F00008000DB008000FEC0800109408000F804F
+:10A7000008000FC0080011CC08000DCC080011F0A3
+:10A7100008000E1C08001634080015DC08000DCCDB
+:10A7200008000DCC08000DCC0800127C0800127C3B
+:10A7300008000DCC08000DCC0800158008000DCCD9
+:10A7400008000DCC08000DCC08000DCC080013F05B
+:10A7500008000DCC08000DCC08000DCC08000DCC75
+:10A7600008000DCC08000DCC08000DCC08000DCC65
+:10A7700008000DCC08000DCC08000DCC08000DCC55
+:10A7800008000DCC08000DCC08000FE008000DCC2F
+:10A7900008000DCC0800153008000DCC08000DCCC9
+:10A7A00008000DCC08000DCC08000DCC08000DCC25
+:10A7B00008000DCC08000DCC08000DCC08000DCC15
+:10A7C00008000DCC08000DCC08000DCC08000DCC05
+:10A7D00008000DCC08000DCC08000DCC0800145C5E
+:10A7E00008000DCC08000DCC08001370080012E022
+:10A7F00008002E9408002E9C08002E6408002E707D
+:10A8000008002E7C08002E88080046B408003F008F
+:10A8100008004634080046B4080046B4080044B4B2
+:10A82000080046B4080046FC08005524080054E41B
+:10A83000080054B008005484080054600800541CF8
+:10A840000A000C7600000000000000000000000D6F
+:10A85000727870352E302E306A3600000500000305
+:10A8600000000000000000010000000000000000E7
+:10A8700000000000000000000000000000000000D8
+:10A8800000000000000000000000000000000000C8
+:10A8900000000000000000000000000000000000B8
+:10A8A00000000000000000000000000000000000A8
+:10A8B0000000000000000000000000000000000098
+:10A8C0000000000000000000000000000000000088
+:10A8D0000000000000000000000000000000000078
+:10A8E0000000000000000000000000000000000068
+:10A8F0000000000000000000000000000000000058
+:10A900000000000000000000000000000000000047
+:10A910000000000000000000000000000000000037
+:10A920000000000000000000000000000000000027
+:10A930000000000000000000000000000000000017
+:10A940000000000000000000000000000000000007
+:10A9500000000000000000000000000000000000F7
+:10A9600000000000000000000000000000000000E7
+:10A9700000000000000000000000000000000000D7
+:10A9800000000000000000000000000000000000C7
+:10A9900000000000000000000000000000000000B7
+:10A9A00000000000000000000000000000000000A7
+:10A9B0000000000000000000000000000000000097
+:10A9C0000000000000000000000000000000000087
+:10A9D0000000000000000000000000000000000077
+:10A9E0000000000000000000000000000000000067
+:10A9F0000000000000000000000000000000000057
+:10AA00000000000000000000000000000000000046
+:10AA10000000000000000000000000000000000036
+:10AA20000000000000000000000000000000000026
+:10AA30000000000000000000000000000000000016
+:10AA40000000000000000000000000000000000006
+:10AA500000000000000000000000000000000000F6
+:10AA600000000000000000000000000000000000E6
+:10AA700000000000000000000000000000000000D6
+:10AA800000000000000000000000000000000000C6
+:10AA900000000000000000000000000000000000B6
+:10AAA00000000000000000000000000000000000A6
+:10AAB0000000000000000000000000000000000096
+:10AAC0000000000000000000000000000000000086
+:10AAD0000000000000000000000000000000000076
+:10AAE0000000000000000000000000000000000066
+:10AAF0000000000000000000000000000000000056
+:10AB00000000000000000000000000000000000045
+:10AB10000000000000000000000000000000000035
+:10AB20000000000000000000000000000000000025
+:10AB30000000000000000000000000000000000015
+:10AB40000000000000000000000000000000000005
+:10AB500000000000000000000000000000000000F5
+:10AB600000000000000000000000000000000000E5
+:10AB700000000000000000000000000000000000D5
+:10AB800000000000000000000000000000000000C5
+:10AB900000000000000000000000000000000000B5
+:10ABA00000000000000000000000000000000000A5
+:10ABB0000000000000000000000000000000000095
+:10ABC0000000000000000000000000000000000085
+:10ABD0000000000000000000000000000000000075
+:10ABE0000000000000000000000000000000000065
+:10ABF0000000000000000000000000000000000055
+:10AC00000000000000000000000000000000000044
+:10AC10000000000000000000000000000000000034
+:10AC20000000000000000000000000000000000024
+:10AC30000000000000000000000000000000000014
+:10AC40000000000000000000000000000000000004
+:10AC500000000000000000000000000000000000F4
+:10AC600000000000000000000000000000000000E4
+:10AC700000000000000000000000000000000000D4
+:10AC800000000000000000000000000000000000C4
+:10AC900000000000000000000000000000000000B4
+:10ACA00000000000000000000000000000000000A4
+:10ACB0000000000000000000000000000000000094
+:10ACC0000000000000000000000000000000000084
+:10ACD0000000000000000000000000000000000074
+:10ACE0000000000000000000000000000000000064
+:10ACF0000000000000000000000000000000000054
+:10AD00000000000000000000000000000000000043
+:10AD10000000000000000000000000000000000033
+:10AD20000000000000000000000000000000000023
+:10AD30000000000000000000000000000000000013
+:10AD40000000000000000000000000000000000003
+:10AD500000000000000000000000000000000000F3
+:10AD600000000000000000000000000000000000E3
+:10AD700000000000000000000000000000000000D3
+:10AD800000000000000000000000000000000000C3
+:10AD900000000000000000000000000000000000B3
+:10ADA00000000000000000000000000000000000A3
+:10ADB0000000000000000000000000000000000093
+:10ADC0000000000000000000000000000000000083
+:10ADD0000000000000000000000000000000000073
+:10ADE0000000000000000000000000000000000063
+:10ADF0000000000000000000000000000000000053
+:10AE00000000000000000000000000000000000042
+:10AE10000000000000000000000000000000000032
+:10AE20000000000000000000000000000000000022
+:10AE30000000000000000000000000000000000012
+:10AE40000000000000000000000000000000000002
+:10AE500000000000000000000000000000000000F2
+:10AE600000000000000000000000000000000000E2
+:10AE700000000000000000000000000000000000D2
+:10AE800000000000000000000000000000000000C2
+:10AE900000000000000000000000000000000000B2
+:10AEA00000000000000000000000000000000000A2
+:10AEB0000000000000000000000000000000000092
+:10AEC0000000000000000000000000000000000082
+:10AED0000000000000000000000000000000000072
+:10AEE0000000000000000000000000000000000062
+:10AEF0000000000000000000000000000000000052
+:10AF00000000000000000000000000000000000041
+:10AF10000000000000000000000000000000000031
+:10AF20000000000000000000000000000000000021
+:10AF30000000000000000000000000000000000011
+:10AF40000000000000000000000000000000000001
+:10AF500000000000000000000000000000000000F1
+:10AF600000000000000000000000000000000000E1
+:10AF700000000000000000000000000000000000D1
+:10AF800000000000000000000000000000000000C1
+:10AF900000000000000000000000000000000000B1
+:10AFA00000000000000000000000000000000000A1
+:10AFB0000000000000000000000000000000000091
+:10AFC0000000000000000000000000000000000081
+:10AFD0000000000000000000000000000000000071
+:10AFE0000000000000000000000000000000000061
+:10AFF0000000000000000000000000000000000051
+:10B000000000000000000000000000000000000040
+:10B010000000000000000000000000000000000030
+:10B020000000000000000000000000000000000020
+:10B030000000000000000000000000000000000010
+:10B040000000000000000000000000000000000000
+:10B0500000000000000000000000000000000000F0
+:10B0600000000000000000000000000000000000E0
+:10B0700000000000000000000000000000000000D0
+:10B0800000000000000000000000000000000000C0
+:10B0900000000000000000000000000000000000B0
+:10B0A00000000000000000000000000000000000A0
+:10B0B0000000000000000000000000000000000090
+:10B0C0000000000000000000000000000000000080
+:10B0D0000000000000000000000000000000000070
+:10B0E0000000000000000000000000000000000060
+:10B0F0000000000000000000000000000000000050
+:10B10000000000000000000000000000000000003F
+:10B11000000000000000000000000000000000002F
+:10B12000000000000000000000000000000000001F
+:10B13000000000000000000000000000000000000F
+:10B1400000000000000000000000000000000000FF
+:10B1500000000000000000000000000000000000EF
+:10B1600000000000000000000000000000000000DF
+:10B1700000000000000000000000000000000000CF
+:10B1800000000000000000000000000000000000BF
+:10B1900000000000000000000000000000000000AF
+:10B1A000000000000000000000000000000000009F
+:10B1B000000000000000000000000000000000008F
+:10B1C000000000000000000000000000000000007F
+:10B1D000000000000000000000000000000000006F
+:10B1E000000000000000000000000000000000005F
+:10B1F000000000000000000000000000000000004F
+:10B20000000000000000000000000000000000003E
+:10B21000000000000000000000000000000000002E
+:10B22000000000000000000000000000000000001E
+:10B23000000000000000000000000000000000000E
+:10B2400000000000000000000000000000000000FE
+:10B2500000000000000000000000000000000000EE
+:10B2600000000000000000000000000000000000DE
+:10B2700000000000000000000000000000000000CE
+:10B2800000000000000000000000000000000000BE
+:10B2900000000000000000000000000000000000AE
+:10B2A000000000000000000000000000000000009E
+:10B2B000000000000000000000000000000000008E
+:10B2C000000000000000000000000000000000007E
+:10B2D000000000000000000000000000000000006E
+:10B2E000000000000000000000000000000000005E
+:10B2F000000000000000000000000000000000004E
+:10B30000000000000000000000000000000000003D
+:10B31000000000000000000000000000000000002D
+:10B32000000000000000000000000000000000001D
+:10B33000000000000000000000000000000000000D
+:10B3400000000000000000000000000000000000FD
+:10B3500000000000000000000000000000000000ED
+:10B3600000000000000000000000000000000000DD
+:10B3700000000000000000000000000000000000CD
+:10B3800000000000000000000000000000000000BD
+:10B3900000000000000000000000000000000000AD
+:10B3A000000000000000000000000000000000009D
+:10B3B000000000000000000000000000000000008D
+:10B3C000000000000000000000000000000000007D
+:10B3D000000000000000000000000000000000006D
+:10B3E000000000000000000000000000000000005D
+:10B3F000000000000000000000000000000000004D
+:10B40000000000000000000000000000000000003C
+:10B41000000000000000000000000000000000002C
+:10B42000000000000000000000000000000000001C
+:10B43000000000000000000000000000000000000C
+:10B4400000000000000000000000000000000000FC
+:10B4500000000000000000000000000000000000EC
+:10B4600000000000000000000000000000000000DC
+:10B4700000000000000000000000000000000000CC
+:10B4800000000000000000000000000000000000BC
+:10B4900000000000000000000000000000000000AC
+:10B4A000000000000000000000000000000000009C
+:10B4B000000000000000000000000000000000008C
+:10B4C000000000000000000000000000000000007C
+:10B4D000000000000000000000000000000000006C
+:10B4E000000000000000000000000000000000005C
+:10B4F000000000000000000000000000000000004C
+:10B50000000000000000000000000000000000003B
+:10B51000000000000000000000000000000000002B
+:10B52000000000000000000000000000000000001B
+:10B53000000000000000000000000000000000000B
+:10B5400000000000000000000000000000000000FB
+:10B5500000000000000000000000000000000000EB
+:10B5600000000000000000000000000000000000DB
+:10B5700000000000000000000000000000000000CB
+:10B5800000000000000000000000000000000000BB
+:10B5900000000000000000000000000000000000AB
+:10B5A000000000000000000000000000000000009B
+:10B5B000000000000000000000000000000000008B
+:10B5C000000000000000000000000000000000007B
+:10B5D000000000000000000000000000000000006B
+:10B5E000000000000000000000000000000000005B
+:10B5F000000000000000000000000000000000004B
+:10B60000000000000000000000000000000000003A
+:10B61000000000000000000000000000000000002A
+:10B62000000000000000000000000000000000001A
+:10B63000000000000000000000000000000000000A
+:10B6400000000000000000000000000000000000FA
+:10B6500000000000000000000000000000000000EA
+:10B6600000000000000000000000000000000000DA
+:10B6700000000000000000000000000000000000CA
+:10B6800000000000000000000000000000000000BA
+:10B6900000000000000000000000000000000000AA
+:10B6A000000000000000000000000000000000009A
+:10B6B000000000000000000000000000000000008A
+:10B6C000000000000000000000000000000000007A
+:10B6D000000000000000000000000000000000006A
+:10B6E000000000000000000000000000000000005A
+:10B6F000000000000000000000000000000000004A
+:10B700000000000000000000000000000000000039
+:10B710000000000000000000000000000000000029
+:10B720000000000000000000000000000000000019
+:10B730000000000000000000000000000000000009
+:10B7400000000000000000000000000000000000F9
+:10B7500000000000000000000000000000000000E9
+:10B7600000000000000000000000000000000000D9
+:10B7700000000000000000000000000000000000C9
+:10B7800000000000000000000000000000000000B9
+:10B7900000000000000000000000000000000000A9
+:10B7A0000000000000000000000000000000000099
+:10B7B0000000000000000000000000000000000089
+:10B7C0000000000000000000000000000000000079
+:10B7D0000000000000000000000000000000000069
+:10B7E0000000000000000000000000000000000059
+:10B7F0000000000000000000000000000000000049
+:10B800000000000000000000000000000000000038
+:10B810000000000000000000000000000000000028
+:10B820000000000000000000000000000000000018
+:10B830000000000000000000000000000000000008
+:10B8400000000000000000000000000000000000F8
+:10B8500000000000000000000000000000000000E8
+:10B8600000000000000000000000000000000000D8
+:10B8700000000000000000000000000000000000C8
+:10B8800000000000000000000000000000000000B8
+:10B8900000000000000000000000000000000000A8
+:10B8A0000000000000000000000000000000000098
+:10B8B0000000000000000000000000000000000088
+:10B8C0000000000000000000000000000000000078
+:10B8D0000000000000000000000000000000000068
+:10B8E0000000000000000000000000000000000058
+:10B8F0000000000000000000000000000000000048
+:10B900000000000000000000000000000000000037
+:10B910000000000000000000000000000000000027
+:10B920000000000000000000000000000000000017
+:10B930000000000000000000000000000000000007
+:10B9400000000000000000000000000000000000F7
+:10B9500000000000000000000000000000000000E7
+:10B9600000000000000000000000000000000000D7
+:10B9700000000000000000000000000000000000C7
+:10B9800000000000000000000000000000000000B7
+:10B9900000000000000000000000000000000000A7
+:10B9A0000000000000000000000000000000000097
+:10B9B0000000000000000000000000000000000087
+:10B9C0000000000000000000000000000000000077
+:10B9D0000000000000000000000000000000000067
+:10B9E0000000000000000000000000000000000057
+:10B9F0000000000000000000000000000000000047
+:10BA00000000000000000000000000000000000036
+:10BA10000000000000000000000000000000000026
+:10BA20000000000000000000000000000000000016
+:10BA30000000000000000000000000000000000006
+:10BA400000000000000000000000000000000000F6
+:10BA500000000000000000000000000000000000E6
+:10BA600000000000000000000000000000000000D6
+:10BA700000000000000000000000000000000000C6
+:10BA800000000000000000000000000000000000B6
+:10BA900000000000000000000000000000000000A6
+:10BAA0000000000000000000000000000000000096
+:10BAB0000000000000000000000000000000000086
+:10BAC0000000000000000000000000000000000076
+:10BAD0000000000000000000000000000000000066
+:10BAE0000000000000000000000000000000000056
+:10BAF0000000000000000000000000000000000046
+:10BB00000000000000000000000000000000000035
+:10BB10000000000000000000000000000000000025
+:10BB20000000000000000000000000000000000015
+:10BB30000000000000000000000000000000000005
+:10BB400000000000000000000000000000000000F5
+:10BB500000000000000000000000000000000000E5
+:10BB600000000000000000000000000000000000D5
+:10BB700000000000000000000000000000000000C5
+:10BB800000000000000000000000000000000000B5
+:10BB900000000000000000000000000000000000A5
+:10BBA0000000000000000000000000000000000095
+:10BBB0000000000000000000000000000000000085
+:10BBC0000000000000000000000000000000000075
+:10BBD0000000000000000000000000000000000065
+:10BBE0000000000000000000000000000000000055
+:10BBF0000000000000000000000000000000000045
+:10BC00000000000000000000000000000000000034
+:10BC10000000000000000000000000000000000024
+:10BC20000000000000000000000000000000000014
+:10BC30000000000000000000000000000000000004
+:10BC400000000000000000000000000000000000F4
+:10BC500000000000000000000000000000000000E4
+:10BC600000000000000000000000000000000000D4
+:10BC700000000000000000000000000000000000C4
+:10BC800000000000000000000000000000000000B4
+:10BC900000000000000000000000000000000000A4
+:10BCA0000000000000000000000000000000000094
+:10BCB0000000000000000000000000000000000084
+:10BCC0000000000000000000000000000000000074
+:10BCD0000000000000000000000000000000000064
+:10BCE0000000000000000000000000000000000054
+:10BCF0000000000000000000000000000000000044
+:10BD00000000000000000000000000000000000033
+:10BD10000000000000000000000000000000000023
+:10BD20000000000000000000000000000000000013
+:10BD30000000000000000000000000000000000003
+:10BD400000000000000000000000000000000000F3
+:10BD500000000000000000000000000000000000E3
+:10BD600000000000000000000000000000000000D3
+:10BD700000000000000000000000000000000000C3
+:10BD800000000000000000000000000000000000B3
+:10BD900000000000000000000000000000000000A3
+:10BDA0000000000000000000000000000000000093
+:10BDB0000000000000000000000000000000000083
+:10BDC0000000000000000000000000000000000073
+:10BDD0000000000000000000000000000000000063
+:10BDE0000000000000000000000000000000000053
+:10BDF0000000000000000000000000000000000043
+:10BE00000000000000000000000000000000000032
+:10BE10000000000000000000000000000000000022
+:10BE20000000000000000000000000000000000012
+:10BE30000000000000000000000000000000000002
+:10BE400000000000000000000000000000000000F2
+:10BE500000000000000000000000000000000000E2
+:10BE600000000000000000000000000000000000D2
+:10BE700000000000000000000000000000000000C2
+:10BE800000000000000000000000000000000000B2
+:10BE900000000000000000000000000000000000A2
+:10BEA0000000000000000000000000000000000092
+:10BEB0000000000000000000000000000000000082
+:10BEC0000000000000000000000000000000000072
+:10BED0000000000000000000000000000000000062
+:10BEE0000000000000000000000000000000000052
+:10BEF0000000000000000000000000000000000042
+:10BF00000000000000000000000000000000000031
+:10BF10000000000000000000000000000000000021
+:10BF20000000000000000000000000000000000011
+:10BF30000000000000000000000000000000000001
+:10BF400000000000000000000000000000000000F1
+:10BF500000000000000000000000000000000000E1
+:10BF600000000000000000000000000000000000D1
+:10BF700000000000000000000000000000000000C1
+:10BF800000000000000000000000000000000000B1
+:10BF900000000000000000000000000000000000A1
+:10BFA0000000000000000000000000000000000091
+:10BFB0000000000000000000000000000000000081
+:10BFC0000000000000000000000000000000000071
+:10BFD0000000000000000000000000000000000061
+:10BFE0000000000000000000000000000000000051
+:10BFF0000000000000000000000000000000000041
+:10C000000000000000000000000000000000000030
+:10C010000000000000000000000000000000000020
+:10C020000000000000000000000000000000000010
+:10C030000000000000000000000000000000000000
+:10C0400000000000000000000000000000000000F0
+:10C0500000000000000000000000000000000000E0
+:10C0600000000000000000000000000000000000D0
+:10C0700000000000000000000000000000000000C0
+:10C0800000000000000000000000000000000000B0
+:10C0900000000000000000000000000000000000A0
+:10C0A0000000000000000000000000000000000090
+:10C0B0000000000000000000000000000000000080
+:10C0C0000000000000000000000000000000000070
+:10C0D0000000000000000000000000000000000060
+:10C0E0000000000000000000000000000000000050
+:10C0F0000000000000000000000000000000000040
+:10C10000000000000000000000000000000000002F
+:10C11000000000000000000000000000000000001F
+:10C12000000000000000000000000000000000000F
+:10C1300000000000000000000000000000000000FF
+:10C1400000000000000000000000000000000000EF
+:10C1500000000000000000000000000000000000DF
+:10C1600000000000000000000000000000000000CF
+:10C1700000000000000000000000000000000000BF
+:10C1800000000000000000000000000000000000AF
+:10C19000000000000000000000000000000000009F
+:10C1A000000000000000000000000000000000008F
+:10C1B000000000000000000000000000000000007F
+:10C1C000000000000000000000000000000000006F
+:10C1D000000000000000000000000000000000005F
+:10C1E000000000000000000000000000000000004F
+:10C1F000000000000000000000000000000000003F
+:10C20000000000000000000000000000000000002E
+:10C21000000000000000000000000000000000001E
+:10C22000000000000000000000000000000000000E
+:10C2300000000000000000000000000000000000FE
+:10C2400000000000000000000000000000000000EE
+:10C2500000000000000000000000000000000000DE
+:10C2600000000000000000000000000000000000CE
+:10C2700000000000000000000000000000000000BE
+:10C2800000000000000000000000000000000000AE
+:10C29000000000000000000000000000000000009E
+:10C2A000000000000000000000000000000000008E
+:10C2B000000000000000000000000000000000007E
+:10C2C000000000000000000000000000000000006E
+:10C2D000000000000000000000000000000000005E
+:10C2E000000000000000000000000000000000004E
+:10C2F000000000000000000000000000000000003E
+:10C30000000000000000000000000000000000002D
+:10C31000000000000000000000000000000000001D
+:10C32000000000000000000000000000000000000D
+:10C3300000000000000000000000000000000000FD
+:10C3400000000000000000000000000000000000ED
+:10C3500000000000000000000000000000000000DD
+:10C3600000000000000000000000000000000000CD
+:10C3700000000000000000000000000000000000BD
+:10C3800000000000000000000000000000000000AD
+:10C39000000000000000000000000000000000009D
+:10C3A000000000000000000000000000000000008D
+:10C3B000000000000000000000000000000000007D
+:10C3C000000000000000000000000000000000006D
+:10C3D000000000000000000000000000000000005D
+:10C3E000000000000000000000000000000000004D
+:10C3F000000000000000000000000000000000003D
+:10C40000000000000000000000000000000000002C
+:10C41000000000000000000000000000000000001C
+:10C42000000000000000000000000000000000000C
+:10C4300000000000000000000000000000000000FC
+:10C4400000000000000000000000000000000000EC
+:10C4500000000000000000000000000000000000DC
+:10C4600000000000000000000000000000000000CC
+:10C4700000000000000000000000000000000000BC
+:10C4800000000000000000000000000000000000AC
+:10C49000000000000000000000000000000000009C
+:10C4A000000000000000000000000000000000008C
+:10C4B000000000000000000000000000000000007C
+:10C4C000000000000000000000000000000000006C
+:10C4D000000000000000000000000000000000005C
+:10C4E000000000000000000000000000000000004C
+:10C4F000000000000000000000000000000000003C
+:10C50000000000000000000000000000000000002B
+:10C51000000000000000000000000000000000001B
+:10C52000000000000000000000000000000000000B
+:10C5300000000000000000000000000000000000FB
+:10C5400000000000000000000000000000000000EB
+:10C5500000000000000000000000000000000000DB
+:10C5600000000000000000000000000000000000CB
+:10C5700000000000000000000000000000000000BB
+:10C5800000000000000000000000000000000000AB
+:10C59000000000000000000000000000000000009B
+:10C5A000000000000000000000000000000000008B
+:10C5B000000000000000000000000000000000007B
+:10C5C000000000000000000000000000000000006B
+:10C5D000000000000000000000000000000000005B
+:10C5E000000000000000000000000000000000004B
+:10C5F000000000000000000000000000000000003B
+:10C60000000000000000000000000000000000002A
+:10C61000000000000000000000000000000000001A
+:10C62000000000000000000000000000000000000A
+:10C6300000000000000000000000000000000000FA
+:10C6400000000000000000000000000000000000EA
+:10C6500000000000000000000000000000000000DA
+:10C6600000000000000000000000000000000000CA
+:10C6700000000000000000000000000000000000BA
+:10C6800000000000000000000000000000000000AA
+:10C69000000000000000000000000000000000009A
+:10C6A000000000000000000000000000000000008A
+:10C6B000000000000000000000000000000000007A
+:10C6C000000000000000000000000000000000006A
+:10C6D000000000000000000000000000000000005A
+:10C6E000000000000000000000000000000000004A
+:10C6F000000000000000000000000000000000003A
+:10C700000000000000000000000000000000000029
+:10C710000000000000000000000000000000000019
+:10C720000000000000000000000000000000000009
+:10C7300000000000000000000000000000000000F9
+:10C7400000000000000000000000000000000000E9
+:10C7500000000000000000000000000000000000D9
+:10C7600000000000000000000000000000000000C9
+:10C7700000000000000000000000000000000000B9
+:10C7800000000000000000000000000000000000A9
+:10C790000000000000000000000000000000000099
+:10C7A0000000000000000000000000000000000089
+:10C7B0000000000000000000000000000000000079
+:10C7C0000000000000000000000000000000000069
+:10C7D0000000000000000000000000000000000059
+:10C7E0000000000000000000000000000000000049
+:10C7F0000000000000000000000000000000000039
+:10C800000000000000000000000000000000000028
+:10C810000000000000000000000000000000000018
+:10C820000000000000000000000000000000000008
+:10C8300000000000000000000000000000000000F8
+:10C8400000000000000000000000000000000000E8
+:10C8500000000000000000000000000000000000D8
+:10C8600000000000000000000000000000000000C8
+:10C8700000000000000000000000000000000000B8
+:10C8800000000000000000000000000000000000A8
+:10C890000000000000000000000000000000000098
+:10C8A0000000000000000000000000000000000088
+:10C8B0000000000000000000000000000000000078
+:10C8C0000000000000000000000000000000000068
+:10C8D0000000000000000000000000000000000058
+:10C8E0000000000000000000000000000000000048
+:10C8F0000000000000000000000000000000000038
+:10C900000000000000000000000000000000000027
+:10C910000000000000000000000000000000000017
+:10C920000000000000000000000000000000000007
+:10C9300000000000000000000000000000000000F7
+:10C9400000000000000000000000000000000000E7
+:10C9500000000000000000000000000000000000D7
+:10C9600000000000000000000000000000000000C7
+:10C9700000000000000000000000000000000000B7
+:10C9800000000000000000000000000000000000A7
+:10C990000000000000000000000000000000000097
+:10C9A0000000000000000000000000000000000087
+:10C9B0000000000000000000000000000000000077
+:10C9C0000000000000000000000000000000000067
+:10C9D0000000000000000000000000000000000057
+:10C9E0000000000000000000000000000000000047
+:10C9F0000000000000000000000000000000000037
+:10CA00000000000000000000000000000000000026
+:10CA10000000000000000000000000000000000016
+:10CA20000000000000000000000000000000000006
+:10CA300000000000000000000000000000000000F6
+:10CA400000000000000000000000000000000000E6
+:10CA500000000000000000000000000000000000D6
+:10CA600000000000000000000000000000000000C6
+:10CA700000000000000000000000000000000000B6
+:10CA800000000000000000000000000000000000A6
+:10CA90000000000000000000000000000000000096
+:10CAA0000000000000000000000000000000000086
+:10CAB0000000000000000000000000000000000076
+:10CAC0000000000000000000000000000000000066
+:10CAD0000000000000000000000000000000000056
+:10CAE0000000000000000000000000000000000046
+:10CAF0000000000000000000000000000000000036
+:10CB00000000000000000000000000000000000025
+:10CB10000000000000000000000000000000000015
+:10CB20000000000000000000000000000000000005
+:10CB300000000000000000000000000000000000F5
+:10CB400000000000000000000000000000000000E5
+:10CB500000000000000000000000000000000000D5
+:10CB600000000000000000000000000000000000C5
+:10CB700000000000000000000000000000000000B5
+:10CB800000000000000000000000000000000000A5
+:10CB90000000000000000000000000000000000095
+:10CBA0000000000000000000000000000000000085
+:10CBB0000000000000000000000000000000000075
+:10CBC0000000000000000000000000000000000065
+:10CBD0000000000000000000000000000000000055
+:10CBE0000000000000000000000000000000000045
+:10CBF0000000000000000000000000000000000035
+:10CC00000000000000000000000000000000000024
+:10CC10000000000000000000000000000000000014
+:10CC20000000000000000000000000000000000004
+:10CC300000000000000000000000000000000000F4
+:10CC400000000000000000000000000000000000E4
+:10CC500000000000000000000000000000000000D4
+:10CC600000000000000000000000000000000000C4
+:10CC700000000000000000000000000000000000B4
+:10CC800000000000000000000000000000000000A4
+:10CC90000000000000000000000000000000000094
+:10CCA0000000000000000000000000000000000084
+:10CCB0000000000000000000000000000000000074
+:10CCC0000000000000000000000000000000000064
+:10CCD0000000000000000000000000000000000054
+:10CCE0000000000000000000000000000000000044
+:10CCF0000000000000000000000000000000000034
+:10CD00000000000000000000000000000000000023
+:10CD10000000000000000000000000000000000013
+:10CD20000000000000000000000000000000000003
+:10CD300000000000000000000000000000000000F3
+:10CD400000000000000000000000000000000000E3
+:10CD500000000000000000000000000000000000D3
+:10CD600000000000000000000000000000000000C3
+:10CD700000000000000000000000000000000000B3
+:10CD800000000000000000000000000000000000A3
+:10CD90000000000000000000000000000000000093
+:10CDA0000000000000000000000000000000000083
+:10CDB0000000000000000000000000000000000073
+:10CDC0000000000000000000000000000000000063
+:10CDD0000000000000000000000000000000000053
+:10CDE0000000000000000000000000000000000043
+:10CDF0000000000000000000000000000000000033
+:10CE00000000000000000000000000000000000022
+:10CE10000000000000000000000000000000000012
+:10CE20000000000000000000000000000000000002
+:10CE300000000000000000000000000000000000F2
+:10CE400000000000000000000000000000000000E2
+:10CE500000000000000000000000000000000000D2
+:10CE600000000000000000000000000000000000C2
+:10CE700000000000000000000000000000000000B2
+:10CE800000000000000000000000000000000000A2
+:10CE90000000000000000000000000000000000092
+:10CEA0000000000000000000000000000000000082
+:10CEB0000000000000000000000000000000000072
+:10CEC0000000000000000000000000000000000062
+:10CED0000000000000000000000000000000000052
+:10CEE0000000000000000000000000000000000042
+:10CEF0000000000000000000000000000000000032
+:10CF00000000000000000000000000000000000021
+:10CF10000000000000000000000000000000000011
+:10CF20000000000000000000000000000000000001
+:10CF300000000000000000000000000000000000F1
+:10CF400000000000000000000000000000000000E1
+:10CF500000000000000000000000000000000000D1
+:10CF600000000000000000000000000000000000C1
+:10CF700000000000000000000000000000000000B1
+:10CF800000000000000000000000000000000000A1
+:10CF90000000000000000000000000000000000091
+:10CFA0000000000000000000000000000000000081
+:10CFB0000000000000000000000000000000000071
+:10CFC0000000000000000000000000000000000061
+:10CFD0000000000000000000000000000000000051
+:10CFE0000000000000000000000000000000000041
+:10CFF0000000000000000000000000000000000031
+:10D000000000000000000000000000000000000020
+:10D010000000000000000000000000000000000010
+:10D020000000000000000000000000000000000000
+:10D0300000000000000000000000000000000000F0
+:10D0400000000000000000000000000000000000E0
+:10D0500000000000000000000000000000000000D0
+:10D0600000000000000000000000000000000000C0
+:10D0700000000000000000000000000000000000B0
+:10D0800000000000000000000000000000000000A0
+:10D090000000000000000000000000000000000090
+:10D0A0000000000000000000000000000000000080
+:10D0B0000000000000000000000000000000000070
+:10D0C0000000000000000000000000000000000060
+:10D0D0000000000000000000000000000000000050
+:10D0E0000000000000000000000000000000000040
+:10D0F0000000000000000000000000000000000030
+:10D10000000000000000000000000000000000001F
+:10D11000000000000000000000000000000000000F
+:10D1200000000000000000000000000000000000FF
+:10D1300000000000000000000000000000000000EF
+:10D1400000000000000000000000000000000000DF
+:10D1500000000000000000000000000000000000CF
+:10D1600000000000000000000000000000000000BF
+:10D1700000000000000000000000000000000000AF
+:10D18000000000000000000000000000000000009F
+:10D19000000000000000000000000000000000008F
+:10D1A000000000000000000000000000000000007F
+:10D1B000000000000000000000000000000000006F
+:10D1C000000000000000000000000000000000005F
+:10D1D000000000000000000000000000000000004F
+:10D1E000000000000000000000000000000000003F
+:10D1F000000000000000000000000000000000002F
+:10D20000000000000000000000000000000000001E
+:10D21000000000000000000000000000000000000E
+:10D2200000000000000000000000000000000000FE
+:10D2300000000000000000000000000000000000EE
+:10D2400000000000000000000000000000000000DE
+:10D2500000000000000000000000000000000000CE
+:10D2600000000000000000000000000000000000BE
+:10D2700000000000000000000000000000000000AE
+:10D28000000000000000000000000000000000009E
+:10D29000000000000000000000000000000000008E
+:10D2A000000000000000000000000000000000007E
+:10D2B000000000000000000000000000000000006E
+:10D2C000000000000000000000000000000000005E
+:10D2D000000000000000000000000000000000004E
+:10D2E000000000000000000000000000000000003E
+:10D2F000000000000000000000000000000000002E
+:10D30000000000000000000000000000000000001D
+:10D31000000000000000000000000000000000000D
+:10D3200000000000000000000000000000000000FD
+:10D3300000000000000000000000000000000000ED
+:10D3400000000000000000000000000000000000DD
+:10D3500000000000000000000000000000000000CD
+:10D3600000000000000000000000000000000000BD
+:10D3700000000000000000000000000000000000AD
+:10D38000000000000000000000000000000000009D
+:10D39000000000000000000000000000000000008D
+:10D3A000000000000000000000000000000000007D
+:10D3B000000000000000000000000000000000006D
+:10D3C000000000000000000000000000000000005D
+:10D3D000000000000000000000000000000000004D
+:10D3E000000000000000000000000000000000003D
+:10D3F000000000000000000000000000000000002D
+:10D40000000000000000000000000000000000001C
+:10D41000000000000000000000000000000000000C
+:10D4200000000000000000000000000000000000FC
+:10D4300000000000000000000000000000000000EC
+:10D4400000000000000000000000000000000000DC
+:10D4500000000000000000000000000000000000CC
+:10D4600000000000000000000000000000000000BC
+:10D4700000000000000000000000000000000000AC
+:10D48000000000000000000000000000000000009C
+:10D49000000000000000000000000000000000008C
+:10D4A000000000000000000000000000000000007C
+:10D4B000000000000000000000000000000000006C
+:10D4C000000000000000000000000000000000005C
+:10D4D000000000000000000000000000000000004C
+:10D4E000000000000000000000000000000000003C
+:10D4F000000000000000000000000000000000002C
+:10D50000000000000000000000000000000000001B
+:10D51000000000000000000000000000000000000B
+:10D5200000000000000000000000000000000000FB
+:10D5300000000000000000000000000000000000EB
+:10D5400000000000000000000000000000000000DB
+:10D5500000000000000000000000000000000000CB
+:10D5600000000000000000000000000000000000BB
+:10D5700000000000000000000000000000000000AB
+:10D58000000000000000000000000000000000009B
+:10D59000000000000000000000000000000000008B
+:10D5A000000000000000000000000000000000007B
+:10D5B000000000000000000000000000000000006B
+:10D5C000000000000000000000000000000000005B
+:10D5D000000000000000000000000000000000004B
+:10D5E000000000000000000000000000000000003B
+:10D5F000000000000000000000000000000000002B
+:10D60000000000000000000000000000000000001A
+:10D61000000000000000000000000000000000000A
+:10D6200000000000000000000000000000000000FA
+:10D6300000000000000000000000000000000000EA
+:10D6400000000000000000000000000000000000DA
+:10D6500000000000000000000000000000000000CA
+:10D6600000000000000000000000000000000000BA
+:10D6700000000000000000000000000000000000AA
+:10D68000000000000000000000000000000000009A
+:10D69000000000000000000000000000000000008A
+:10D6A000000000000000000000000000000000007A
+:10D6B000000000000000000000000000000000006A
+:10D6C000000000000000000000000000000000005A
+:10D6D000000000000000000000000000000000004A
+:10D6E000000000000000000000000000000000003A
+:10D6F000000000000000000000000000000000002A
+:10D700000000000000000000000000000000000019
+:10D710000000000000000000000000000000000009
+:10D7200000000000000000000000000000000000F9
+:10D7300000000000000000000000000000000000E9
+:10D7400000000000000000000000000000000000D9
+:10D7500000000000000000000000000000000000C9
+:10D7600000000000000000000000000000000000B9
+:10D7700000000000000000000000000000000000A9
+:10D780000000000000000000000000000000000099
+:10D790000000000000000000000000000000000089
+:10D7A0000000000000000000000000000000000079
+:10D7B0000000000000000000000000000000000069
+:10D7C0000000000000000000000000000000000059
+:10D7D0000000000000000000000000000000000049
+:10D7E0000000000000000000000000000000000039
+:10D7F0000000000000000000000000000000000029
+:10D800000000000000000000000000000000000018
+:10D810000000000000000000000000000000000008
+:10D8200000000000000000000000000000000000F8
+:10D8300000000000000000000000000000000000E8
+:10D8400000000000000000000000000000000000D8
+:10D8500000000000000000000000000000000000C8
+:10D8600000000000000000000000000000000000B8
+:10D8700000000000000000000000000000000000A8
+:10D880000000000000000000000000000000000098
+:10D890000000000000000000000000000000000088
+:10D8A0000000000000000000000000000000000078
+:10D8B0000000000000000000000000000000000068
+:10D8C0000000000000000000000000000000000058
+:10D8D0000000000000000000000000000000000048
+:10D8E0000000000000000000000000000000000038
+:10D8F0000000000000000000000000000000000028
+:10D900000000000000000000000000000000000017
+:10D910000000000000000000000000000000000007
+:10D9200000000000000000000000000000000000F7
+:10D9300000000000000000000000000000000000E7
+:10D9400000000000000000000000000000000000D7
+:10D9500000000000000000000000000000000000C7
+:10D9600000000000000000000000000000000000B7
+:10D9700000000000000000000000000000000000A7
+:10D980000000000000000000000000000000000097
+:10D990000000000000000000000000000000000087
+:10D9A0000000000000000000000000000000000077
+:10D9B0000000000000000000000000000000000067
+:10D9C0000000000000000000000000000000000057
+:10D9D0000000000000000000000000000000000047
+:10D9E0000000000000000000000000000000000037
+:10D9F0000000000000000000000000000000000027
+:10DA00000000000000000000000000000000000016
+:10DA100000000000000000000000000010000003F3
+:10DA2000000000000000000D0000000D3C02080096
+:10DA3000244275803C03080024637A28AC4000002F
+:10DA40000043202B1480FFFD244200043C1D0800ED
+:10DA500037BD7FFC03A0F0213C100800261031D810
+:10DA60003C1C0800279C75800E0010EF0000000091
+:10DA70000000000D30A5FFFF30C600FF27430180E6
+:10DA80008F4201B80440FFFE24020002AC64000093
+:10DA9000A4650008A066000AA062000B3C0210000A
+:10DAA000AC67001803E00008AF4201B83C03600017
+:10DAB0008C624FF80440FFFE3C020200AC644FC091
+:10DAC000AC624FC43C02100003E00008AC624FF8A7
+:10DAD0009482000C2486001400A038210002130256
+:10DAE000000210800082402100C8102B1040005717
+:10DAF0000000000090C300002C620009504000515B
+:10DB000090C20001000310803C03080024637534B8
+:10DB1000004310218C42000000400008000000007B
+:10DB200090C300012402000A1462003A00000000C1
+:10DB3000010610232C42000A1440003624C60002BD
+:10DB40008CE2000034420100ACE2000090C2000010
+:10DB500090C3000190C4000290C5000300031C00A4
+:10DB60000002160000431025000422000044102586
+:10DB70000045102524C60004ACE2000490C2000059
+:10DB800090C3000190C4000290C50003000216007B
+:10DB900000031C000043102500042200004410254F
+:10DBA0000045102524C600040A000CAAACE20008B7
+:10DBB00090C30001240200041462001624C600026F
+:10DBC00090C2000090C400018CE30000000212002B
+:10DBD000004410253463000424C60002ACE2000CAB
+:10DBE0000A000CAAACE3000090C300012402000369
+:10DBF0001462000824C600028CE2000090C30000FA
+:10DC000024C6000134420008A0E300100A000CAA58
+:10DC1000ACE2000003E000082402000190C3000110
+:10DC2000240200021062000224C40002010020212C
+:10DC30000A000CAA008030210A000CAA24C60001A8
+:10DC400090C200010A000CAA00C2302103E00008C3
+:10DC50000000102127BDFFE8AFBF0014AFB00010D7
+:10DC60000E00130E00808021936200052403FFFE46
+:10DC700002002021004310248FBF00148FB0001039
+:10DC8000A36200050A00131727BD001827BDFFE88F
+:10DC9000AFB00010AFBF00140E000F0E0080802147
+:10DCA0009362000024030050304200FF144300043C
+:10DCB00024020100AF4201800A000D22020020214F
+:10DCC000AF400180020020218FBF00148FB00010F0
+:10DCD0000A000FAD27BD001827BDFF80AFBE00783A
+:10DCE000AFB70074AFB30064AFBF007CAFB60070D5
+:10DCF000AFB5006CAFB40068AFB20060AFB1005C0C
+:10DD0000AFB000588F5001289363003F9362000525
+:10DD10000000F021307300FF0002102730420001A4
+:10DD20000000B82114400066AFA0005093420116D5
+:10DD300093430112304200FF306300FF0342202171
+:10DD400003431021244540008F82001C104000181E
+:10DD5000249140008F4201043C0300010043102441
+:10DD600010400013000000008CA3000C8F620030F4
+:10DD7000146201B5240200018CA300108F62002CF4
+:10DD8000146201B1240200019762003A94834000BA
+:10DD90003042FFFF146201AC240200019762003898
+:10DDA000962300023042FFFF146201A72402000103
+:10DDB00093620000304300FF24020020106200053F
+:10DDC0002402005010620006000000000A000D6CE2
+:10DDD000000000000000000D0A000D75AFA000302B
+:10DDE0003C1E080027DE75E80A000D75AFA0003064
+:10DDF0003C0208008C4200DC244200013C01080087
+:10DE0000AC2200DC0E0013D8000000000A000F0353
+:10DE10008FBF007C8F4201043C0300209234000D30
+:10DE2000004310240002202B00042140AFA4003046
+:10DE30008F4301043C020040006218241460000279
+:10DE4000348700400080382132820020AFA70030A4
+:10DE50001440000234E6008000E0302110C0000BC6
+:10DE6000AFA6003093C500088F67004C0200202148
+:10DE700000052B0034A5008130A5F0810E000C8D2B
+:10DE800030C600FF0A000F00000000009362003E51
+:10DE9000304200401040000E24020004566200068A
+:10DEA00024020012020020210E0014E6022030217C
+:10DEB0000A000F038FBF007C1662000500000000FF
+:10DEC0000E000D13000020210A000F038FBF007CFD
+:10DED0009743011A9624000E9362003532850004A0
+:10DEE0003076FFFF00442004AFA400548E320004BB
+:10DEF00010A000158E3500089362003E30420040AD
+:10DF000010400007000000000E00142802402021ED
+:10DF10001040000D000000000A000F00000000008B
+:10DF20008F620044024210230440014500000000BB
+:10DF30008F6200480242102304410141240400166C
+:10DF40000A000E038FC200048F62004802421023B1
+:10DF500004400008000000003C0208008C42310030
+:10DF6000244200013C010800AC2231000A000EF5F9
+:10DF7000000000008F620040024210231840000998
+:10DF80002402000C3C0208008C423100329400FC58
+:10DF90000000B021244200013C010800AC22310005
+:10DFA0002402000CAFA200308F62004000522023F8
+:10DFB0001880000D02C4102A144001160000000051
+:10DFC0001496000602C410233A8200013042000178
+:10DFD000144001100000000002C4102302449021EC
+:10DFE0000A000DEB3056FFFF0000202132820002B4
+:10DFF0001040001A328200109362003E304200400E
+:10E00000504000118FC200040E00130E02002021A8
+:10E0100024020018A362003F936200052403FFFE60
+:10E0200002002021004310240E001317A3620005F4
+:10E0300024040039000028210E00141124060018C1
+:10E040000A000F0224020001240400170040F8090E
+:10E05000000000000A000F0224020001104000F836
+:10E06000000000008F63004C8F62005402A2102356
+:10E070001C4000F302A31023044200010060A82109
+:10E08000AFA40018AFB20010AFB600149342012045
+:10E090008F6500409763003C304200FF034210212F
+:10E0A000004410218FA400543063FFFF244240003D
+:10E0B0000083182B8FA40030AFA20020AFA500284A
+:10E0C00000832025AFA40030AFA50024AFA0002C12
+:10E0D000AFB500349362003E30420008504000115A
+:10E0E0008FC200000220202127A500380E000CA4BA
+:10E0F000AFA000385440000B8FC200008FA2003840
+:10E1000030420100504000078FC200008FA3003C46
+:10E110008F6200600062102304430001AF6300605F
+:10E120008FC200000040F80927A400108FA2003021
+:10E130003042000254400001329400FE9362003EDF
+:10E1400030420040104000378FA300148F6200540B
+:10E1500016A2001A3282000124020014126200107A
+:10E160002A62001510400006240200162402000C4A
+:10E1700012620007328200010A000E5F00000000F8
+:10E1800012620005328200010A000E5F00000000EA
+:10E190000A000E5A2417000E0A000E5A2417001007
+:10E1A0000A000E5E24170012936200232403FFBDB1
+:10E1B00000431024A36200233282000110400019A2
+:10E1C0008FA300142402000C1262000E2A62000DBC
+:10E1D000104000062402000E2402000A126200070A
+:10E1E0008FA200240A000E77244200011262000868
+:10E1F0008FA200240A000E77244200010A000E7547
+:10E20000241700082402000E16E20002241700164C
+:10E21000241700108FA2002424420001AFA2002482
+:10E220008FA300148FA200248F730040004310219D
+:10E23000AF6200408FA20054936400368F630040A9
+:10E2400002A288213402FFFF00821004006218211C
+:10E25000AF6300488FA6003030C200081040000EA7
+:10E26000000000008F6200581622000430C600FF34
+:10E270009742011A5040000134C6001093C50008AF
+:10E280008FA700340200202100052B0034A5008058
+:10E290000E000C8D30A5F0808F62004000531023DB
+:10E2A000184000178FA200183C0208008C423198D9
+:10E2B00030420010104000092402000197620068FB
+:10E2C0001440000624020001A76200689742007A09
+:10E2D0002442000A0A000EBBA7620012A7620012C5
+:10E2E0000E00130E020020219362007D2403000122
+:10E2F00002002021344200010A000EB9AFA30050F1
+:10E300001840000A000000000E00130E0200202139
+:10E310009362007D2403000102002021AFA300507E
+:10E32000344200040E001317A362007D9362003E86
+:10E33000304200401440000C328200011040000ABC
+:10E34000000000008F6300408FC200042404001806
+:10E35000246300010040F809AF6300408FA2003041
+:10E360000A000F02304200048F6200581051001062
+:10E37000000000008F620018024210231C400008B9
+:10E38000240400018F6200181642000900000000FA
+:10E390008F62001C02A21023044000050000000050
+:10E3A000AF710058AFA40050AF720018AF75001CD9
+:10E3B00012E0000B8FA200500E00130E020020216D
+:10E3C000A377003F0E0013170200202102E0302146
+:10E3D000240400370E001411000028218FA20050E1
+:10E3E00010400003000000000E000C9B02002021E2
+:10E3F00012C00005000018218FA200303042000436
+:10E400005040001100601021240300010A000F0297
+:10E41000006010210E00130E020020219362007D87
+:10E4200002002021344200040E001317A362007D75
+:10E430000E000C9B020020210A000F0224020001A2
+:10E44000AF400044240200018FBF007C8FBE0078E3
+:10E450008FB700748FB600708FB5006C8FB40068F2
+:10E460008FB300648FB200608FB1005C8FB0005832
+:10E4700003E0000827BD00808F4201B80440FFFE82
+:10E4800024020800AF4201B803E0000800000000C9
+:10E4900030A5FFFF30C6FFFF8F4201B80440FFFEEA
+:10E4A0003C020008AF44018003421021AF44002029
+:10E4B000944200483044FFFF1080001924020003FA
+:10E4C00024A200120082102B104000152402000329
+:10E4D000934201202403001AA343018B304200FF22
+:10E4E0002447FFFE8F8200000087182B386300014D
+:10E4F0000002138200431024104000058F830004A3
+:10E5000034620001A74701940A000F39AF8200046A
+:10E510002402FFFE006210240A000F39AF820004BB
+:10E52000A342018B24020002A742018C8F820000CB
+:10E530008F840004A745018EA74201908F82000CB2
+:10E5400030838000AF4201A8A74601881060000E0A
+:10E550008F82000493420116304200FC24420004E2
+:10E56000005A10218C4240003042FFFF1440000648
+:10E570008F8200043C02FFFF34427FFF00821024A0
+:10E58000AF8200048F8200042403BFFF978400023F
+:10E5900000431024A74201A69742010C0002140078
+:10E5A00000441025AF4201AC3C021000AF4201B85C
+:10E5B00003E00008000000008F4700709342011242
+:10E5C0008F83000027BDFFF0304200FF0002288249
+:10E5D00030620100000030211040004324A40003F9
+:10E5E00030624000104000103062200000041080B3
+:10E5F000005A10218C43400024A400040004108021
+:10E60000AFA30000005A10218C424000AFA20004CA
+:10E6100093420116304200FC005A10218C42400007
+:10E620000A000F86AFA200081040002F0000302122
+:10E6300000041080005A10218C43400024A40004E0
+:10E6400000041080AFA30000005A10218C4240004B
+:10E65000AFA00008AFA200048FA80008000030217E
+:10E6600000002021240A00083C0908002529010097
+:10E6700003A41021148A000300042A001100000AD8
+:10E680000000000090420000248400012C83000C54
+:10E6900000A2102100021080004910218C420000CD
+:10E6A0001460FFF300C230263C0408008C8431045F
+:10E6B0008F4200702C83002010600009004738232F
+:10E6C0003C0308002463310800041080004310213B
+:10E6D00024830001AC4700003C010800AC23310456
+:10E6E000AF86000C2406000100C0102103E00008E2
+:10E6F00027BD00103C0208008C42003827BDFFD027
+:10E70000AFB60028AFB40020AFB20018AFBF002CE6
+:10E71000AFB50024AFB3001CAFB10014AFB0001010
+:10E72000000090213C16080026D600381440000254
+:10E730002454FFFF0000A0219742010E8F840000A7
+:10E740003042FFFF308340001060000A2453000471
+:10E750003C020020008210245040000730828000DC
+:10E760008F8200042403BFFF008318240A000FD700
+:10E7700034421000308280001040000A3C02002029
+:10E7800000821024104000078F8200043C03FFFF2A
+:10E7900034637FFF0083182434428000AF8200047A
+:10E7A000AF8300000E000F5E000000001440000761
+:10E7B000000000009743011E9742011C3063FFFFD9
+:10E7C0000002140000621825AF83000C9742010C70
+:10E7D0008F4340003046FFFF3402FFFF1462000306
+:10E7E000000000000A000FEF241200208F424000BA
+:10E7F0003042010054400001241200108F840000B8
+:10E800003082100050400014365200013082002047
+:10E810001440000B3C021000008210245040000EF7
+:10E82000365200013C030E003C020DFF0083182409
+:10E830003442FFFF0043102B5040000736520001C6
+:10E840003C0208008C42002C244200013C010800DC
+:10E85000AC22002C365200053C0508008CA5003483
+:10E8600054A000408F8400008F8200105440003D6F
+:10E870008F8400008F8200043042400054400039F1
+:10E880008F8400003C021F01008210243C03100012
+:10E89000144300348F84000030C202001440003260
+:10E8A0003C0200013265FFFF364600028F4201B88C
+:10E8B0000440FFFE3C020008AF40018003421021EB
+:10E8C000944200483043FFFF10600019AF830008F6
+:10E8D00024A200120062102B104000162402000334
+:10E8E000934201202403001AA343018B304200FF0E
+:10E8F0002443FFFE8F820000304240001040000899
+:10E900008F8200048F8200080043102B1440000403
+:10E910008F820004A74301940A00103A3442000198
+:10E920002403FFFE004310240A00103EAF820004BF
+:10E9300024020003A342018B8F8300042402BFFF43
+:10E940000062182424020002A742018C8F8200007A
+:10E95000A745018EA7460188A74301A60A0010D942
+:10E96000A74201903C020001008210241040000BDD
+:10E970003C0210003C0208008C4200D89745010E72
+:10E98000240400802442000130A5FFFF3C01080060
+:10E99000AC2200D80A0010E22406000300821024F2
+:10E9A00010400041000000003C0208008C42003092
+:10E9B0001040000C8F8200043042400010400009DB
+:10E9C0003C030F00008318243C0201000043102B7D
+:10E9D00014400004364600023265FFFF0A0010E2D0
+:10E9E0002404008010A0000D308201001040000BB4
+:10E9F0003C020F00008210243C0302001043000779
+:10EA00008F82000C00541024005610219042000404
+:10EA1000244200040A001097000221C000000000F8
+:10EA20008F8600003C0508008CA500D00006160269
+:10EA30003050000F38A200012C4200012E03000CC0
+:10EA40000043102414400015001021C02602FFFCD2
+:10EA50002C420004544000110000202138A2000282
+:10EA60002C42000100431024104000030006124213
+:10EA70000A001097000020210010182B00431024DA
+:10EA800050400006001021C0000020213265FFFF29
+:10EA90000E000F143246FFFB001021C03265FFFF4D
+:10EAA0000A0010E2364600028F4240003C11080086
+:10EAB0008E310024304201001040003E322200011D
+:10EAC0000220802110A00014325500043082010081
+:10EAD00010400012240200013C020F0000821024AA
+:10EAE0003C0302001043000C8F82000C02403021D6
+:10EAF0003265FFFF0054102400561021904400049A
+:10EB00003252FFFB248400040E000F14000421C0C5
+:10EB10002402FFFE022280242402000116020007C4
+:10EB2000320200013242000450400001365200021D
+:10EB30003265FFFF0A0010E102403021104000075B
+:10EB40003202000402403021000020210E000F1488
+:10EB50003265FFFF3252FFFB320200041040000713
+:10EB60008F82000030420800104000043265FFFF31
+:10EB7000024030210E000F142404010016A00015DD
+:10EB80008FBF002C274301808F4201B80440FFFE55
+:10EB900024022000A462000824020002A062000BEC
+:10EBA000A46000103C021000AF4201B80A0010E55A
+:10EBB0008FBF002C104000078FBF002C3265FFFF75
+:10EBC00036460002000020210E000F140000000055
+:10EBD0008FBF002C8FB600288FB500248FB4002083
+:10EBE0008FB3001C8FB200188FB100148FB00010CB
+:10EBF0000000102103E0000827BD003027BDFFC83A
+:10EC0000AFB000103C04600CAFBF0030AFB7002CB9
+:10EC1000AFB60028AFB50024AFB40020AFB3001CDE
+:10EC2000AFB20018AFB100148C8250002403FF7FF4
+:10EC30003C1A8000004310243442380CAC8250004F
+:10EC4000240200033C106000AF4200088E02080856
+:10EC50003C1B80083C010800AC2000203042FFF043
+:10EC6000384200102C4200010E001C46AF82001CEE
+:10EC70003C04FFFF3C020400348308063442000CCD
+:10EC8000AE021948AE03194C3C0560168E0219807D
+:10EC90008CA300003442020000641824AE021980E4
+:10ECA0003C0253531462000334A47C008CA2000481
+:10ECB000005020218C82007C8C830078AF82001869
+:10ECC000AF8300143C028000344200708C4300008B
+:10ECD00000403821AF830020006030218CE8000024
+:10ECE0003C0508008CA500FC3C0408008C8400F85E
+:10ECF000010630230000102100A6282100A6302B99
+:10ED000000822021008620213C010800AC2500FC67
+:10ED10003C010800AC2400F88F56000032C200030A
+:10ED20001040FFEE010030218CE600003C05080099
+:10ED30008CA500FC3C0408008C8400F800C830233B
+:10ED400000A628210000102100A6302B00822021DF
+:10ED50000086202132C700013C010800AC2500FCE0
+:10ED6000AF8800203C010800AC2400F810E0016BE3
+:10ED700032C200028F4301283C02000803421021E6
+:10ED8000AF4300208F4301048F44010094420048A8
+:10ED9000AF830000AF8400043042FFFF0E000F0E6F
+:10EDA000AF8200083C0208008C4200C010400008FE
+:10EDB0008F8400003C0208008C4200C42442000101
+:10EDC0003C010800AC2200C40A0012AF00000000A1
+:10EDD0003C02001000821024144001358F8300048F
+:10EDE0003C0208008C4200203C0308008C63003881
+:10EDF00000009021244200013C010800AC220020C8
+:10EE00003C17080026F70038146000022474FFFF46
+:10EE10000000A0219742010E308340003042FFFFE6
+:10EE20001060000A245300043C02002000821024D9
+:10EE300050400007308280008F8200042403BFFF0F
+:10EE4000008318240A00118D3442100030828000A3
+:10EE50001040000A3C0200200082102410400007ED
+:10EE60008F8200043C03FFFF34637FFF008318247C
+:10EE700034428000AF820004AF8300000E000F5EBA
+:10EE80000000000014400007000000009743011E2E
+:10EE90009742011C3063FFFF000214000062182536
+:10EEA000AF83000C9742010C8F4340003046FFFFB8
+:10EEB0003402FFFF14620003000000000A0011A5E5
+:10EEC000241200208F4240003042010054400001D3
+:10EED000241200108F840000308210005040001473
+:10EEE00036520001308200201440000B3C0210001A
+:10EEF000008210245040000E365200013C030E00E8
+:10EF00003C020DFF008318243442FFFF0043102B06
+:10EF100050400007365200013C0208008C42002C91
+:10EF2000244200013C010800AC22002C36520005AE
+:10EF30003C0508008CA5003454A000408F840000DC
+:10EF40008F8200105440003D8F8400008F820004A7
+:10EF500030424000544000398F8400003C021F01C1
+:10EF6000008210243C031000144300348F840000FE
+:10EF700030C20200144000323C0200013265FFFF43
+:10EF8000364600028F4201B80440FFFE3C020008F2
+:10EF9000AF40018003421021944200483043FFFFFC
+:10EFA00010600019AF83000824A200120062102B29
+:10EFB0001040001624020003934201202403001A8B
+:10EFC000A343018B304200FF2443FFFE8F820000E9
+:10EFD00030424000104000088F8200048F820008F9
+:10EFE0000043102B144000048F820004A7430194B7
+:10EFF0000A0011F0344200012403FFFE00431024F4
+:10F000000A0011F4AF82000424020003A342018B22
+:10F010008F8300042402BFFF006218242402000230
+:10F02000A742018C8F820000A745018EA746018868
+:10F03000A74301A60A00128FA74201903C020001DB
+:10F04000008210245040000B3C0210003C020800DB
+:10F050008C4200D89745010E240400802442000110
+:10F0600030A5FFFF3C010800AC2200D80A0012982E
+:10F07000240600030082102410400041000000001C
+:10F080003C0208008C4200301040000C8F820004CB
+:10F0900030424000104000093C030F000083182458
+:10F0A0003C0201000043102B1440000436460002CD
+:10F0B0003265FFFF0A0012982404008010A0000DA2
+:10F0C000308201001040000B3C020F00008210242F
+:10F0D0003C030200104300078F82000C00541024F0
+:10F0E0000057102190420004244200040A00124DEF
+:10F0F000000221C0000000008F8600003C050800CF
+:10F100008CA500D0000616023050000F38A2000176
+:10F110002C4200012E03000C004310241440001563
+:10F12000001021C02602FFFC2C42000454400011B4
+:10F130000000202138A200022C42000100431024CC
+:10F1400050400003000612420A00124D0000202128
+:10F150000010182B0043102450400006001021C05E
+:10F16000000020213265FFFF0E000F143246FFFB26
+:10F17000001021C03265FFFF0A00129836460002D7
+:10F180008F4240003C1108008E31002430420100C3
+:10F190001040003E322200010220802110A0001405
+:10F1A0003255000430820100104000122402000198
+:10F1B0003C020F00008210243C0302001043000CAC
+:10F1C0008F82000C024030213265FFFF0054102472
+:10F1D00000571021904400043252FFFB24840004A5
+:10F1E0000E000F14000421C02402FFFE022280241E
+:10F1F000240200011602000732020001324200041C
+:10F2000050400001365200023265FFFF0A0012979B
+:10F210000240302110400007320200040240302139
+:10F22000000020210E000F143265FFFF3252FFFB59
+:10F2300032020004104000078F82000030420800B4
+:10F24000104000043265FFFF024030210E000F1411
+:10F250002404010016A0002E3C0240002743018038
+:10F260008F4201B80440FFFE24022000A46200087F
+:10F2700024020002A062000BA46000103C021000F7
+:10F28000AF4201B80A0012B43C02400050400020D6
+:10F290003C0240003265FFFF36460002000020219C
+:10F2A0000E000F14000000000A0012B43C024000DF
+:10F2B0002402BFFF0062102410400008000000007C
+:10F2C000240287FF00621024144000083C02006002
+:10F2D0000082102410400005000000000E000D26E2
+:10F2E000000000000A0012AD000000000E0012F83D
+:10F2F00000000000104000063C0240008F43012443
+:10F300003C026020AC430014000000003C024000BE
+:10F31000AF4201380000000032C200021040FE6A15
+:10F320003C0280008F4201403C044000AF4200207C
+:10F330008F4301483C027000006218241064002DC5
+:10F34000000000000083102B144000063C02600007
+:10F350003C022000106200073C0240000A0012F448
+:10F360000000000010620027000000000A0012F4F4
+:10F370003C0240008F4201482403000400021402B2
+:10F38000304200FF1443000B274401808F430140AB
+:10F390008F4201B80440FFFE2402001CAC83000031
+:10F3A000A082000B3C021000AF4201B80A0012F428
+:10F3B0003C0240008F4201B80440FFFE0000000004
+:10F3C0008F42014800021402A482000824020002B5
+:10F3D000A082000B8F420148A48200108F4201449A
+:10F3E000AC8200243C021000AF4201B80A0012F4C3
+:10F3F0003C0240000E00131C000000000A0012F442
+:10F400003C0240000E001C53000000003C02400083
+:10F41000AF420178000000000A0011223C02800087
+:10F420008F4201003042003E1440001124020001CE
+:10F43000AF4000488F420100304207C01040000535
+:10F4400000000000AF40004CAF40005003E0000857
+:10F4500024020001AF400054AF4000408F42010041
+:10F460003042380054400001AF4000442402000103
+:10F4700003E00008000000003C029000344200015C
+:10F4800000822025AF4400208F4200200440FFFE70
+:10F490000000000003E00008000000003C028000C3
+:10F4A000344200010082202503E00008AF44002020
+:10F4B00027BDFFE0AFB20018AFBF001CAFB1001412
+:10F4C000AFB000108F5001408F5101483C028000C6
+:10F4D0000011940202222024324300FF2402000E75
+:10F4E0001062008A2862000F104000122862003764
+:10F4F000240200061062003B28620007104000074B
+:10F50000240200091060001A240200011062002584
+:10F51000000000000A0013D1000000001062007B10
+:10F520002402000B1062005B3222FFFF0A0013D19D
+:10F530000000000010400008240200382862003556
+:10F54000104000802402001F1062007E00000000B6
+:10F550000A0013D1000000001062007A240200802B
+:10F5600010620042000000000A0013D100000000F9
+:10F570008F4201B80440FFFE24020001AF50018019
+:10F58000AF400184A7520188A342018A24020002ED
+:10F59000A342018BA75101908F4201440A0013CC72
+:10F5A000AF4201A41080000A240200023C010800BE
+:10F5B000A02275D83C010800AC3075E08F420144B0
+:10F5C0003C010800AC2275DC0A0013D38FBF001C7D
+:10F5D0008F4201B80440FFFE240200020A0013B665
+:10F5E000000000008F4201B80440FFFE0000000050
+:10F5F000AF5001803C020800904275D810400003D3
+:10F60000000018213C0308008C6375E0AF430184BF
+:10F61000A75201883C020800904275D800001821CA
+:10F6200034420001A342018A24020002A342018B5A
+:10F63000A75101908F420144AF4201A43C0208004F
+:10F64000904275D8104000033C0210003C030800B3
+:10F650008C6375DCAF4301A8AF4201B83C010800E0
+:10F66000A02075D80A0013D38FBF001C8F4201B8A9
+:10F670000440FFFE24020002A342018BA75201882E
+:10F68000A75101908F420144A74201920A0013CE74
+:10F690003C0210001440001D0000000093620005B1
+:10F6A0003042000414400037000000000E00130E2A
+:10F6B0000200202193620005020020213442000450
+:10F6C0000E001317A3620005936200053042000488
+:10F6D00014400002000000000000000D93620000D2
+:10F6E00024030020304200FF144300080000000003
+:10F6F0008F4201B80440FFFE24020005AF50018094
+:10F70000A342018B3C021000AF4201B88F4201B806
+:10F710000440FFFE24020002AF400180AF5001848C
+:10F72000A7520188A342018AA342018BA7510190ED
+:10F73000AF4001A48F420144AF4201A80A0013CE9A
+:10F740003C0210008F4201B80440FFFE2402000179
+:10F75000AF500180AF400184A7520188A342018AC3
+:10F7600024020002A342018BA7510190AF4001A4E3
+:10F77000AF4001A83C021000AF4201B80A0013D309
+:10F780008FBF001C0000000D8FBF001C8FB200183F
+:10F790008FB100148FB0001003E0000827BD0020D7
+:10F7A00027BDFFE8AFBF00100E000F0E00000000E5
+:10F7B000AF4001808FBF0010000020210A000FAD74
+:10F7C00027BD00183084FFFF30A5FFFF000018217F
+:10F7D000108000070000000030820001104000028D
+:10F7E00000042042006518210A0013E400052840A7
+:10F7F00003E000080060102110C0000624C6FFFFCF
+:10F800008CA2000024A50004AC8200000A0013EEC4
+:10F810002484000403E000080000000010A0000899
+:10F8200024A3FFFFAC8600000000000000000000E1
+:10F830002402FFFF2463FFFF1462FFFA2484000404
+:10F8400003E000080000000027BDFFE8AFBF001480
+:10F85000AFB000100E00130E008080219362007D77
+:10F8600002002021344200200E001317A362007D05
+:10F87000020020218FBF00148FB000100A000C9BE3
+:10F8800027BD0018308300FF30A500FF30C600FF01
+:10F89000274701808F4201B80440FFFE00000000AE
+:10F8A0008F42012834634000ACE2000024020001D2
+:10F8B000ACE00004A4E30008A0E2000A2402000275
+:10F8C000A0E2000B3C021000A4E50010ACE0002414
+:10F8D000ACE00028A4E6001203E00008AF4201B843
+:10F8E00027BDFFE8AFBF00109362003F2403001262
+:10F8F000304200FF1043000D008030218F62004431
+:10F90000008210230440000A8FBF00108F6200485D
+:10F91000240400390000282100C2102304410004FF
+:10F92000240600120E001411000000008FBF00100A
+:10F930002402000103E0000827BD001827BDFFC80E
+:10F94000AFB1002C00A08821AFB2003027A5001075
+:10F950000080902102202021AFBF0034AFB00028EA
+:10F960000E000CA4AFA0001010400009024020219E
+:10F970008E220008AF6200840E001402AF600040C7
+:10F98000240400382405008D0A0014DD240600122A
+:10F990009362003E304200081040000F8FA200101A
+:10F9A00030420100104000078FA300148F620060F6
+:10F9B0000062102304430008AF6300600A0014666D
+:10F9C00000000000AF6000609362003E2403FFF778
+:10F9D00000431024A362003E9362003E30420008C0
+:10F9E000144000022406000300003021936200341A
+:10F9F000936300378F640084304200FF306300FF60
+:10FA000000661821000318800043282100A4202B41
+:10FA10001080000B000000009763003C8F620084A0
+:10FA20003063FFFF004510230062182B14600004B0
+:10FA3000000000008F6200840A00148200458023C9
+:10FA40009762003C3050FFFF8FA30010306200042B
+:10FA500010400004000628808FA2001C0A00148AAF
+:10FA60000202102B2E02021850400003240202183A
+:10FA70000A00149302051023306300041060000391
+:10FA8000004510238FA2001C004510230040802158
+:10FA90002C42008054400001241000800E00130E00
+:10FAA0000240202124020001AF62000C9362003E5C
+:10FAB000001020403042007FA362003E8E220004EE
+:10FAC00024420001AF620040A770003C8F620050EA
+:10FAD0009623000E00431021AF6200588F62005041
+:10FAE00000441021AF62005C8E220004AF62001857
+:10FAF0008E220008AF62001C8FA200103042000866
+:10FB00005440000A93A20020A3600036936200369E
+:10FB10002403FFDFA36200359362003E00431024FC
+:10FB2000A362003E0A0014BD8E220008A3620035C5
+:10FB30008E220008AF62004C8F6200248F63004069
+:10FB400000431021AF62004893620000240300507C
+:10FB5000304200FF144300122403FF803C020800DF
+:10FB60008C4231A00242102100431024AF420028F1
+:10FB70003C0208008C4231A08E2400083C03000C9B
+:10FB8000024210213042007F034210210043102125
+:10FB9000AC4400D88E230008AF820028AC4300DCC0
+:10FBA0000E001317024020212404003800002821F1
+:10FBB0002406000A0E001411000000008FBF00345C
+:10FBC0008FB200308FB1002C8FB0002824020001CA
+:10FBD00003E0000827BD003827BDFFE8AFBF0010D5
+:10FBE00090C7000D00C0282130E6001010C0000AA8
+:10FBF00030E200058CA300088F62005410620006FA
+:10FC000030E20005144000178FBF001000002021D3
+:10FC10000A000D1327BD00181040000D30E300123C
+:10FC200010C000108FBF00108CA300088F6200541A
+:10FC30001462000D24020001240400382405008D04
+:10FC40000E001411240600120A0015098FBF0010BF
+:10FC500024020012146200038FBF00100A00143F38
+:10FC600027BD00182402000103E0000827BD00188A
+:10FC700027BDFFF827420180AFA20000308A00FFB5
+:10FC80008F4201B80440FFFE000000008F460128AB
+:10FC90003C0208008C4231A02403FF80AF86005054
+:10FCA00000C2102100431024AF4200243C0208008F
+:10FCB0008C4231A08FA900008FA8000000C2102143
+:10FCC0003042007F034218213C02000A00621821E2
+:10FCD000946400D48FA700008FA5000024020002C6
+:10FCE000AF830028A0A2000B8FA300003542600064
+:10FCF0003084FFFFA4E200083C021000AD260000A3
+:10FD0000AD040004AC60002427BD0008AF4201B878
+:10FD100003E00008240200018C8200048F83002885
+:10FD200000451023AC820004906200633042007FE3
+:10FD3000A06200638C820020938300308F850028AE
+:10FD400034420002AF830044A7800042AC8200200E
+:10FD5000A4A000E490A200632403FFBF004310248A
+:10FD600003E00008A0A20063274301808F4201B88E
+:10FD70000440FFFE8F820050AC6200008F420124DD
+:10FD8000AC62000424026083A46200082402000222
+:10FD9000A062000B3C02100003E00008AF4201B873
+:10FDA0008F880044938200308F8300283C0708002E
+:10FDB00024E779F400481023304200FF304900FC6A
+:10FDC000246500888F860048304A0003112000090E
+:10FDD00000002021248200048CA30000304400FF96
+:10FDE0000089102AACE3000024A500041440FFF9A8
+:10FDF00024E70004114000090000202124820001B2
+:10FE000090A30000304400FF008A102BA0E3000004
+:10FE100024A500011440FFF924E7000130C20003CB
+:10FE2000144000048F850044310200031040000D8F
+:10FE30000000000010A00009000020212482000121
+:10FE400090C30000304400FF0085102BA0E30000A9
+:10FE500024C600011440FFF924E7000103E0000874
+:10FE6000000000001100FFFD00002021248200049A
+:10FE70008CC30000304400FF0088102BACE300006E
+:10FE800024C600041440FFF924E7000403E000083E
+:10FE9000000000008F8300449382003030C600FFD2
+:10FEA00030A500FF00431023304300FF8F8200285D
+:10FEB000008038210043102114C00002244800882B
+:10FEC0000083382130E200031440000530A2000313
+:10FED00014400003306200031040000D00000000D9
+:10FEE00010A00009000020212482000190E30000FE
+:10FEF000304400FF0085102BA103000024E700011F
+:10FF00001440FFF92508000103E00008000000008C
+:10FF100010A0FFFD00002021248200048CE30000DB
+:10FF2000304400FF0085102BAD03000024E70004DF
+:10FF30001440FFF92508000403E000080000000059
+:10FF400027BDFFF82402FFFFAFA200000080382188
+:10FF50002405002F3C090800252975F4240800FF1A
+:10FF60002406FFFF90E2000024A3FFFF0006220208
+:10FF700000C21026304200FF00021080004910210C
+:10FF80008C420000306500FF24E7000114A8FFF553
+:10FF90000082302600061027AFA20004AFA20000A6
+:10FFA0000000282127A6000400C510239044000368
+:10FFB00024A2000100BD1821304500FF2CA200043E
+:10FFC0001440FFF9A06400008FA2000003E00008C5
+:10FFD00027BD00080080482130AAFFFF30C600FF7F
+:10FFE00030E7FFFF274801808F4201B80440FFFE41
+:10FFF0008F820050AD0200008F420124AD02000448
+:020000040001F9
+:100000008D220020A5070008A102000A2402001684
+:10001000A102000B934301208D2200088D240004CF
+:10002000306300FF004310219783004200441021F9
+:100030008D250024004310233C0308008C6331A06D
+:100040008F840028A502000C246300E82402FFFF2F
+:10005000A50A000EA5030010A5060012AD050018A4
+:10006000AD020024948201142403FFF73042FFFF05
+:10007000AD0200288C820118AD02002C3C02100059
+:10008000AD000030AF4201B88D22002000431024A3
+:1000900003E00008AD2200208F82002830E7FFFF38
+:1000A00000804821904200D330A5FFFF30C600FFFA
+:1000B0000002110030420F0000E23825274801807D
+:1000C0008F4201B80440FFFE8F820050AD02000055
+:1000D0008F420124AD0200048D220020A5070008F4
+:1000E000A102000A24020017A102000B9343012081
+:1000F0008D2200088D240004306300FF004310218E
+:1001000097830042004410218F840028004310236D
+:100110003C0308008C6331A0A502000CA505000E6D
+:10012000246300E8A5030010A5060012AD0000142A
+:100130008D220024AD0200188C82005CAD02001CF0
+:100140008C820058AD0200202402FFFFAD02002483
+:10015000948200E63042FFFFAD02002894820060E6
+:10016000948300BE30427FFF3063FFFF0002120025
+:1001700000431021AD02002C3C021000AD00003005
+:10018000AF4201B8948200BE2403FFF700A2102101
+:10019000A48200BE8D2200200043102403E000084A
+:1001A000AD220020274301808F4201B80440FFFEAA
+:1001B00024020018AC640000A062000B8F820028AB
+:1001C000944200E6A46200103C021000AC600030D3
+:1001D00003E00008AF4201B8274301808F4201B815
+:1001E0000440FFFE8F82002C9442001C3042FFFF2F
+:1001F000000211C0AC62000024020019A062000BD2
+:100200003C021000AC60003003E00008AF4201B8CF
+:100210008F87003430C300FF8F4201B80440FFFED7
+:100220008F82005034636000ACA200009382004CC7
+:10023000A0A200058CE20010A4A20006A4A300085E
+:100240008C8200202403FFF7A0A2000A24020002EF
+:10025000A0A2000B8CE20000ACA200108CE2000413
+:10026000ACA200148CE2001CACA200248CE20020A2
+:10027000ACA200288CE2002CACA2002C8C820024C2
+:10028000ACA200183C021000AF4201B88C820020E2
+:100290000043102403E00008AC8200209382004C4D
+:1002A0002403000127BDFFE8004330042C42002056
+:1002B000AFB00010AFBF00142410FFFE10400005C7
+:1002C000274501803C0208008C4231900A0016A8A4
+:1002D000004610243C0208008C4231940046102451
+:1002E00014400007240600848F8300282410FFFF99
+:1002F000906200623042000F34420040A06200620F
+:100300000E00167400000000020010218FBF0014C0
+:100310008FB0001003E0000827BD00188F83002C69
+:1003200027BDFFE0AFB20018AFB10014AFB00010AE
+:10033000AFBF001C9062000D00A0902130D100FFE3
+:100340003042007FA062000D8F8500288E43001888
+:10035000008080218CA2007C146200052402000E23
+:1003600090A20063344200200A0016D1A0A20063CC
+:100370000E001697A382004C2403FFFF1043004792
+:100380002404FFFF52200045000020218E4300007E
+:100390003C02001000621024504000043C0200089F
+:1003A000020020210A0016E0240200150062102439
+:1003B000504000098E450000020020212402001454
+:1003C0000E001697A382004C2403FFFF1043003356
+:1003D0002404FFFF8E4500003C02000200A210240E
+:1003E000104000163C0200048F86002C8CC20014C2
+:1003F0008CC300108CC40014004310230044102B45
+:1004000050400005020020218E43002C8CC20010B9
+:1004100010620003020020210A00171124020012BA
+:100420003C02000400A210245040001C00002021C7
+:10043000020020210A0017112402001300A2102438
+:10044000104000068F83002C8C6200105040001377
+:10045000000020210A00170B020020218C620010EE
+:10046000504000048E42002C020020210A00171187
+:100470002402001150400009000020210200202128
+:10048000240200170E001697A382004C2403FFFFDE
+:10049000104300022404FFFF000020218FBF001C36
+:1004A0008FB200188FB100148FB00010008010219F
+:1004B00003E0000827BD00209383003027BDFFE044
+:1004C00024020034AFB20018AFB10014AFBF001C5B
+:1004D000AFB00010008088211462000C00A09021B1
+:1004E0008F8400340E0015C08C900030120200077B
+:1004F00024020005022020210E001697A382004C42
+:100500002403FFFF104300602404FFFF9242000415
+:10051000104000098F820028022020212402000CB4
+:100520000E001697A382004C2403FFFF10430056D1
+:100530002404FFFF8F820028A38000248E43000440
+:100540008C4400803C0200FF3442FFFF006218240C
+:100550000083202B10800008AF83003C0220202164
+:10056000240200190E001697A382004C2403FFFFFB
+:10057000104300452404FFFF978200428F87004408
+:100580008F85003C0047202310A0003AA78400423A
+:100590008F86002830A200030002102390C300BC05
+:1005A0003050000300B02821000318823071000190
+:1005B0000011108000A228213C0308008C6331A0A8
+:1005C0008F8200503084FFFF0085202B00431021D4
+:1005D00010800010244200888F8400341082000DA7
+:1005E0003C033F018E420000004310243C032500E1
+:1005F0001443000630E500FF8C820000ACC2008886
+:100600008C8200100A001775ACC200980E00159578
+:1006100000003021938200248F8500288F830048BA
+:10062000020238218F820044A387002494A400E4AE
+:10063000006218218F82003C34841000AF83004890
+:1006400000503021A4A400E41220000EAF86004424
+:1006500024E20004A382002494A200E424C3000442
+:10066000AF83004434422000A4A200E40A001792A1
+:10067000000020218F820048AF80004400471021F5
+:10068000AF820048000020218FBF001C8FB20018ED
+:100690008FB100148FB000100080102103E000081B
+:1006A00027BD00208F86002827BDFFE8AFBF0014BC
+:1006B000AFB0001090C2006330420020104000082C
+:1006C00030A500FF8CC2007C2403FFDF2442000120
+:1006D000ACC2007C90C2006300431024A0C200633F
+:1006E00010A000238F8300282750018002002821BA
+:1006F0000E001674240600828F8200289042006348
+:100700003042004050400019A380004C8F830034D9
+:100710008F4201B80440FFFE8F820050AE020000FD
+:1007200024026082A602000824020002A202000B3A
+:100730008C620008AE0200108C62000CAE02001445
+:100740008C620014AE0200188C620018AE02002405
+:100750008C620024AE0200288C620028AE02002CBD
+:100760003C021000AF4201B8A380004C8F830028E8
+:100770008FBF00148FB000109062006327BD001877
+:100780003042007FA0620063978200428F8600445F
+:100790008F8500289383003000461023A7820042F3
+:1007A000A4A000E490A400638F820048AF830044BB
+:1007B0002403FFBF0046102100832024AF8200489D
+:1007C000A0A400638F820028A04000BD8F82002873
+:1007D00003E00008A44000BE8F8A002827BDFFE088
+:1007E000AFB10014AFB000108F880044AFBF001845
+:1007F00093890024954200E430D100FF0109182BB1
+:100800000080802130AC00FF3047FFFF00005821FE
+:1008100014600003310600FF012030210109582334
+:10082000978300420068102B144000320000000043
+:1008300014680007240200018E0200202403FFFB3D
+:1008400034E7800000431024AE020020240200019F
+:1008500034E70880158200053165FFFF0E0015E5BD
+:10086000020020210A001827020020210E0016167F
+:10087000020020210E0016598F8400508F8400281A
+:100880009482006024420001A4820060948200608F
+:100890003C0308008C63318830427FFF5443000FD3
+:1008A0000200202194820060240380000043102471
+:1008B000A48200609082006090830060304200FF5C
+:1008C000000211C200021027000211C03063007F35
+:1008D00000621825A0830060020020210220282148
+:1008E0008FBF00188FB100148FB000100A00179945
+:1008F00027BD0020914200632403FF8000431025A0
+:10090000A1420063978200423048FFFF110000209F
+:10091000938300248F840028004B1023304600FF6F
+:10092000948300E42402EFFF0168282B006218245E
+:10093000A48300E414A000038E02002001005821CB
+:10094000000030212403FFFB34E780000043102423
+:10095000AE02002024020001158200053165FFFF70
+:100960000E0015E5020020210A00184F978300426F
+:100970000E00161602002021978300428F82004449
+:10098000A780004200431023AF82004493830024D9
+:100990008F8200288FBF00188FB100148FB0001015
+:1009A00027BD002003E00008A04300BD8F8200287F
+:1009B00090430088904500BD244900883063003F83
+:1009C0002463FFE024020001006238042C6300204D
+:1009D00030E80019A385002410600010AF890034AE
+:1009E0003C0280003442000224050001240600017C
+:1009F0001500000800E218240000282114600005FA
+:100A000030E200201040000524050001912600017D
+:100A100030C600010A0017E60000000003E00008ED
+:100A20000000000027BDFFD8AFB000108F90003449
+:100A3000AFB40020AFB10014AFBF0024AFB3001CAF
+:100A4000AFB200188E0500103C0208008C4231B095
+:100A50008F86003830A33FFF0062182B8CD3001420
+:100A6000008088218CD20020106000780000A02136
+:100A700090C3000D2402FF8000431024304200FF89
+:100A800050400073022020210005138230420003F1
+:100A90005440006F0220202194C3001C8F82002844
+:100AA0008E050028A44301148CC200100262182392
+:100AB000146500072402001F8F82003C0062102191
+:100AC0000262102B104000088F83002C24020018B3
+:100AD0000E001697A382004C2403FFFF1043006F03
+:100AE0002404FFFF8F83002C8F84003C8C62001055
+:100AF0000244902100441023AC6200108F82002831
+:100B0000AC7200208C4200680052102B104000098B
+:100B10008F830038022020212402001D0E0016972A
+:100B2000A382004C2403FFFF1043005C2404FFFF5A
+:100B30008F8300388E0200248C630024104300074A
+:100B4000022020212402001C0E001697A382004CD4
+:100B50002403FFFF104300512404FFFF8F84002C67
+:100B60008C82002424420001AC8200241253000431
+:100B70008F8200288C4200685642000E8E020000D0
+:100B80008E0200003C030080004310241440000D3E
+:100B90002402001A022020210E001697A382004C86
+:100BA0002403FFFF1043003D2404FFFF0A0018E365
+:100BB0008E0200143C0300800043102450400003C8
+:100BC0008E020014AC8000208E0200142412FFFF5D
+:100BD000105200062402001B022020210E0016974E
+:100BE000A382004C1052002D2404FFFF8E0300004E
+:100BF0003C020001006210241040001F3C020080F3
+:100C00000062102414400008022020212402001A4F
+:100C10000E001697A382004C2403FFFF1043001F11
+:100C20002404FFFF02202021020028210E0016B715
+:100C3000240600012403FFFF2404FFFF1443000ED9
+:100C4000241400010A0019188FBF0024022020215B
+:100C50002402000D8FBF00248FB400208FB3001C2E
+:100C60008FB200188FB100148FB0001027BD00287C
+:100C70000A001697A382004C8F83002C02202021AB
+:100C800002803021946200362405000124420001D4
+:100C90000E0017E6A4620036000020218FBF00245A
+:100CA0008FB400208FB3001C8FB200188FB10014D6
+:100CB0008FB000100080102103E0000827BD00283D
+:100CC0008F83002827BDFFD8AFB40020AFB3001C2E
+:100CD000AFB20018AFB10014AFB00010AFBF002426
+:100CE000906200638F9100342412FFFF3442004071
+:100CF00092250000A06200638E22001000809821DF
+:100D000030B0003F105200060360A0212402000D05
+:100D10000E001697A382004C105200522404FFFFCD
+:100D20008F8300288E2200188C63007C10430007FC
+:100D3000026020212402000E0E001697A382004CB0
+:100D40002403FFFF104300472404FFFF2404002076
+:100D5000120400048F830028906200633442002054
+:100D6000A06200638F85003C10A0001E0000000000
+:100D7000560400048F820028026020210A001962B4
+:100D80002402000A9683000A2404FFFD94420060B6
+:100D90003042FFFF104300348FBF00243C020800A4
+:100DA0008C42318C0045102B14400006026020213B
+:100DB000000028210E0017E6240600010A00198908
+:100DC000000020212402002D0E001697A382004C63
+:100DD0002403FFFF104300232404FFFF0A001989A6
+:100DE00000002021160400058F8400288E230014A3
+:100DF0002402FFFF506200180260202194820060EC
+:100E000024420001A4820060948200603C03080038
+:100E10008C63318830427FFF5443000F02602021F1
+:100E2000948200602403800000431024A4820060A8
+:100E30009082006090830060304200FF000211C287
+:100E400000021027000211C03063007F00621825E5
+:100E5000A0830060026020210E0017992405000184
+:100E6000000020218FBF00248FB400208FB3001C0E
+:100E70008FB200188FB100148FB0001000801021C5
+:100E800003E0000827BD00288F83002827BDFFE866
+:100E9000AFB00010AFBF0014906200638F870034C2
+:100EA00000808021344200408CE60010A062006384
+:100EB0003C0308008C6331B030C23FFF0043102B6D
+:100EC0001040004E8F8500382402FF8090A3000D53
+:100ED00000431024304200FF50400049020020210E
+:100EE0000006138230480003240200025502004429
+:100EF0000200202194A2001C8F85002824030023D7
+:100F0000A4A201148CE60000000616023042003F45
+:100F1000104300103C0300838CE300188CA2007C7B
+:100F2000106200062402000E0E001697A382004CE9
+:100F30002403FFFF104300382404FFFF8F830028A1
+:100F40009062006334420020A06200630A0019CE60
+:100F50008F83002C00C31024144300078F83002CC0
+:100F600090A200623042000F34420020A0A2006232
+:100F7000A38800408F83002C9062000D3042007FD8
+:100F8000A062000D8F83003C106000180200202139
+:100F90008F8400388C8200100043102B1040000911
+:100FA00024020018020020210E001697A382004C94
+:100FB0002403FFFF104300182404FFFF0A0019F662
+:100FC000000020218C820010240500010200202155
+:100FD000004310238F83002C240600010E0017E627
+:100FE000AC6200100A0019F6000020210E001799CB
+:100FF000240500010A0019F600002021020020212A
+:101000002402000D8FBF00148FB0001027BD001800
+:101010000A001697A382004C8FBF00148FB00010F7
+:101020000080102103E0000827BD001827BDFFD86D
+:10103000AFB000108F900034AFB3001CAFBF0020E2
+:10104000AFB20018AFB100148E1200103C030800BC
+:101050008C6331B032423FFF0043102B1040007CC4
+:10106000008098218F8500382402FF8090A3000D16
+:1010700000431024304200FF5040007602602021DF
+:101080000012138230420003240300015443007114
+:101090000260202190A2000D30420008544000035D
+:1010A0008F82003C0A001A262402002450400003CC
+:1010B0008E03000C0A001A26240200278CA20020AE
+:1010C00014620005240200208E0300088CA2002474
+:1010D00010620008240200200E001697A382004C24
+:1010E0002403FFFF1043006A2404FFFF0A001A5183
+:1010F0008F84002C8E0200142411FFFF1451000372
+:101100008F8700280A001A4C240200258E0300183D
+:101110008CE2007C146200162402000E8E03002470
+:101120008CA2002814620012240200218E060028DE
+:101130008CA2002C14C2000E2402001F8E03002C6F
+:101140001060000B240200238CE200680043102B87
+:1011500014400007240200268CA200140066182107
+:101160000043102B504000078F84002C24020022E3
+:101170000E001697A382004C105100452404FFFF77
+:101180008F84002C2403FFF79082000D004310246D
+:10119000A082000D8F8600283C0308008C6331ACD0
+:1011A0008F82005094C400E08F85002C00431021F2
+:1011B00030847FFF00042040004410213043007F32
+:1011C000034320213C03000E008320212403FF80E1
+:1011D00000431024AF42002CA49200008CA20028EF
+:1011E00024420001ACA200288CA2002C8E03002C0B
+:1011F00000431021ACA2002C8E02002CACA20030C7
+:101200008E020014ACA2003494A2003A24420001E1
+:10121000A4A2003A94C600E03C0208008C4231B01F
+:1012200024C4000130837FFF14620013008030214A
+:10123000240280000082302430C2FFFF000213C26B
+:10124000304200FF000210270A001A8E000233C04D
+:10125000026020212402000D8FBF00208FB3001CEC
+:101260008FB200188FB100148FB0001027BD002876
+:101270000A001697A382004C8F820028026020216A
+:10128000240500010E001799A44600E0000020216B
+:101290008FBF00208FB3001C8FB200188FB10014D5
+:1012A0008FB000100080102103E0000827BD002847
+:1012B00027BDFFE0AFB100148F910034AFB0001034
+:1012C000AFBF00188E2600103C0308008C6331B0BD
+:1012D00030C23FFF0043102B1040005E0080802191
+:1012E0008F8500382402FF8090A3000D0043102456
+:1012F000304200FF50400058020020218F82003C05
+:1013000010400008000613828F8200289763000AAD
+:101310002404FFFD944200603042FFFF104300555B
+:1013200000061382304200031440000E000000004B
+:1013300092220002104000058E2300245060001508
+:10134000922300030A001AC7020020218CA2002465
+:101350005062001092230003020020210A001ACFDD
+:101360002402000F90A2000D3042000854400009F2
+:101370009223000302002021240200100E00169781
+:10138000A382004C2403FFFF1043003A2404FFFF14
+:1013900092230003240200025462000C92220003F4
+:1013A0008F82003C54400009922200030200202159
+:1013B0002402002C0E001697A382004C2403FFFF8A
+:1013C0001043002C2404FFFF922200030220282156
+:1013D00002002021384600102CC600012C420001DA
+:1013E0000E0016B7004630252411FFFF10510021D2
+:1013F0002404FFFF8F83003C1060001202002021B4
+:101400003C0208008C42318C0043102B1440000633
+:1014100000000000000028210E0017E6240600014D
+:101420000A001B0D000020212402002D0E0016973B
+:10143000A382004C1051000F2404FFFF0A001B0D73
+:10144000000020210E001799240500010A001B0D41
+:1014500000002021020020212402000D8FBF00186F
+:101460008FB100148FB0001027BD00200A0016971E
+:10147000A382004C8FBF00188FB100148FB00010F2
+:101480000080102103E0000827BD00209383004066
+:1014900027BDFFE024020002AFB10014AFB000107E
+:1014A00000808821AFBF0018000080211062008CEE
+:1014B0002404FFFD978500428F83004430A2FFFF84
+:1014C0000043102B5440007D8F8400480E001558B7
+:1014D000000000003C020800244279F40220202190
+:1014E000004028210E00171EAF8200342409FFFFA0
+:1014F0001049007B2404FFFF3C0808008D087A0493
+:101500003C0208008C4231B03C030800906379F43F
+:1015100031043FFF0082102B1040001B3067003F5A
+:101520003C0208008C4231A88F83005000042180C7
+:1015300000621821006418213062007F03422821D4
+:101540003C02000C00A228213C0200803442000131
+:101550003066007800C230252402FF80006210242B
+:10156000AF42002830640007AF4208048F82002891
+:101570000344202124840940AF460814AF85002C81
+:10158000AF840038AC430118938300402402000369
+:101590001462003B240200012402002610E2003DF8
+:1015A00028E2002710400013240200322402002207
+:1015B00010E2003828E20023104000082402002432
+:1015C0002402002010E200242402002110E2001E68
+:1015D000022020210A001B8C2402000B10E2002DA7
+:1015E0002402002510E20010022020210A001B8C9A
+:1015F0002402000B10E2001A28E20033104000061B
+:101600002402003F2402003110E2000B02202021BE
+:101610000A001B8C2402000B10E200110220202182
+:101620000A001B8C2402000B0E00187902202021D6
+:101630000A001BA7004080210E0019FB0220202178
+:101640000A001BA7004080210E001A9C02202021C6
+:101650000A001BA7004080211509000E00000000B1
+:101660000E001920022020210A001BA70040802123
+:101670000E001697A382004C0A001BA70040802191
+:1016800014620017020020212402002314E2000546
+:101690002402000B0E001992022020210A001BA731
+:1016A0000040802102202021A382004C0E001697CA
+:1016B0002410FFFF0A001BA80200202130A500FF14
+:1016C0000E00159524060001978300428F82004486
+:1016D000A780004200431023AF8200440200202173
+:1016E0008FBF00188FB100148FB000100080102140
+:1016F00003E0000827BD002027BDFFE0AFB10014C4
+:10170000AFBF0018AFB000108F4601283C0308009F
+:101710008C6331A02402FF80AF86005000C31821E3
+:101720003065007F03452821006218243C02000A2E
+:10173000AF43002400A2282190A2006200808821EB
+:10174000AF850028304200FF00021102A382004052
+:1017500090A200BC30420002144000022403003476
+:10176000240300308F820028A3830030938300403D
+:101770008C4200C0A380004CAF82004424020004CD
+:10178000106200308F8400448E2400045080002DAD
+:101790008F8400448E2200103083FFFFA784004214
+:1017A0001060001FAF8200488F8300282405FF804F
+:1017B000022020219062006300A21024304200FF2A
+:1017C0001440000D000000000E001B139790004213
+:1017D00010400010004018212402FFFD5462001147
+:1017E0008E230020020028210E0015360220202121
+:1017F0000A001BF98E2300209062006300A21024CF
+:10180000304200FF10400003022020210E00185B30
+:1018100000000000978200421440FFE48F830028FC
+:101820008E23002030620004104000068F840044A4
+:101830002402FFFB006210240E00154AAE22002095
+:101840008F8400448F8300288FBF00188FB100144D
+:101850008FB000102402000127BD002003E0000823
+:10186000AC6400C030A500FF2403000124A90001DE
+:101870000069102B1040000C00004021240A0001D8
+:1018800000A31023004A38042463000130820001C1
+:101890000069302B1040000200042042010740255F
+:1018A00054C0FFF800A3102303E00008010010213A
+:1018B00027BDFFE03C021EDCAFB20018AFB1001440
+:1018C000AFBF001CAFB0001034526F410000882140
+:1018D000240500080E001C09022020210011808030
+:1018E0003C07080024E775F40002160002071821DF
+:1018F000AC6200000000282124A200013045FFFF57
+:101900008C6200002CA60008044100020002204066
+:101910000092202614C0FFF8AC640000020780216A
+:101920008E0400000E001C0924050020262300015F
+:101930003071FFFF2E2301001460FFE5AE020000AE
+:101940008FBF001C8FB200188FB100148FB0001031
+:1019500003E0000827BD00203C02080024426EB8C6
+:101960003C010800AC2275E83C02080024425430D7
+:101970003C010800AC2275EC240200063C01080082
+:10198000A02275F00A001C1C0000000027BDFFD833
+:10199000AFB3001CAFB20018AFBF0020AFB100144E
+:1019A000AFB000108F5101408F48014800089402E9
+:1019B000324300FF311300FF8F4201B80440FFFEA5
+:1019C00027500180AE1100008F420144AE02000496
+:1019D00024020002A6120008A202000B2402001436
+:1019E000AE13002410620025286200151040000884
+:1019F000240200152402001010620030240200129C
+:101A0000106200098FBF00200A001D468FB3001C22
+:101A10001062007024020022106200378FBF002085
+:101A20000A001D468FB3001C3C0208008C4231A006
+:101A30002403FF800222102100431024AF4200241F
+:101A40003C0208008C4231A0022210213042007F6B
+:101A5000034218213C02000A00621821166000BCF3
+:101A6000AF830028906200623042000F34420030A1
+:101A7000A06200620A001D458FBF00203C04600088
+:101A80008C832C083C02F0033442FFFF00621824D0
+:101A9000AC832C083C0208008C4231A08C832C08BB
+:101AA0002442007400021082000214800062182593
+:101AB000AC832C080A001D458FBF00203C020800A3
+:101AC0008C4231A02403FF80022210210043102405
+:101AD000AF4200243C0208008C4231A03C03000AC3
+:101AE000022210213042007F0342102100431021C6
+:101AF0000A001D44AF8200283C0208008C4231A03D
+:101B00002405FF800222102100451024AF4200244A
+:101B10003C0208008C4231A0022210213042007F9A
+:101B2000034218213C02000A0062182190620063FF
+:101B300000A21024304200FF10400085AF8300282F
+:101B400024620088944300123C0208008C4231A8B1
+:101B500030633FFF0003198002221021004310214F
+:101B60003043007F03432021004510243C03000C38
+:101B700000832021AF4200289082000D00A2102493
+:101B8000304200FF10400072AF84002C9082000DA4
+:101B9000304200101440006F8FBF00200E00166608
+:101BA000000000008F4201B80440FFFE000000006A
+:101BB000AE1100008F420144AE0200042402000274
+:101BC000A6120008A202000BAE1300240A001D4555
+:101BD0008FBF00202406FF8002261024AF42002081
+:101BE0003C0208008C4231A031043FFF00042180F8
+:101BF0000222102100461024AF4200243C030800BA
+:101C00008C6331A83C0208008C4231A03227007F4F
+:101C10000223182102221021006418213042007F83
+:101C20003064007F034228213C02000A0066182429
+:101C300000A22821034420213C02000C0082202124
+:101C4000AF4300283C02000803471821006290219E
+:101C5000AF850028AF84002C0E001666010080219D
+:101C60008F4201B80440FFFE8F82002C8F84002831
+:101C7000274501809042000DACB10000A4B00006E1
+:101C8000000216000002160300021027000237C2ED
+:101C900014C00016248200889442001232033FFFD1
+:101CA00030423FFF1443001224026082908300639D
+:101CB0002402FF8000431024304200FF5040000CFB
+:101CC00024026082908200623042000F3442004061
+:101CD000A082006224026084A4A200082402000DF5
+:101CE000A0A200050A001D2F3C02270024026082EA
+:101CF000A4A20008A0A000053C02270000061C00CA
+:101D00000062182524020002A0A2000BACA3001060
+:101D1000ACA00014ACA00024ACA00028ACA0002C07
+:101D20008E42004C8F84002CACA200189083000DD2
+:101D30002402FF8000431024304200FF10400005C1
+:101D40008FBF00209082000D3042007FA082000DE6
+:101D50008FBF00208FB3001C8FB200188FB100140A
+:101D60008FB000103C02100027BD002803E00008DF
+:041D7000AF4201B8C5
+:0C1D7400080033F8080033F80800337052
+:101D8000080033A8080033DC0800340008003400E1
+:081D900008003400080032E0F5
+:081D98000A0001220000000016
+:101DA000000000000000000D747061352E302E30F0
+:101DB0006A3600000500000100000000000000007D
+:101DC0000000000000000000000000000000000013
+:101DD0000000000000000000000000000000000003
+:101DE00000000000000000000000000000000000F3
+:101DF00000000000000000000000000000000000E3
+:101E000000000000000000000000000000000000D2
+:101E100000000000000000000000000000000000C2
+:101E20000000000010000003000000000000000D92
+:101E30000000000D3C02080024421B803C03080007
+:101E400024632014AC4000000043202B1480FFFDCD
+:101E5000244200043C1D080037BD2FFC03A0F021E4
+:101E60003C100800261004883C1C0800279C1B809E
+:101E70000E00015A000000000000000D3084FFFF3A
+:101E8000308200078F85001810400002248300076D
+:101E90003064FFF80085302130C41FFF034418214F
+:101EA000247B4000AF85001CAF84001803E00008CD
+:101EB000AF4400843084FFFF308200078F8500200C
+:101EC0008F86002810400002248300073064FFF84A
+:101ED000008520210086182B14600002AF850024A5
+:101EE000008620230344282134068000AF8400208C
+:101EF000AF44008000A6202103E00008AF84003832
+:101F000027BDFFD8AFB3001CAFB20018AFB00010B0
+:101F1000AFBF0024AFB40020AFB100143C0860088C
+:101F20008D1450002418FF7F3C1A800002989824DA
+:101F30003672380CAD1250008F5100083C07601CFF
+:101F40003C08600036300001AF500008AF80001838
+:101F5000AF400080AF4000848CE600088D0F080879
+:101F60003C0760168CEC000031EEFFF039CA00101F
+:101F70003C0DFFFF340B80003C030080034B4821E5
+:101F80002D440001018D28243C0253533C010800DC
+:101F9000AC230420AF890038AF860028AF8400103E
+:101FA000275B400014A2000334E37C008CF900049A
+:101FB000032818218C7F007C8C6500783C0280000F
+:101FC00034520070AF85003CAF9F00403C130800C6
+:101FD00026731BC40240A0218E4800008F460000DB
+:101FE00038C300013064000110800017AF8800344E
+:101FF000028048218D2D00003C1908008F39045CB7
+:102000003C1108008E31045801A8F823033F7821C1
+:10201000000040210228382101FF802B00F07021B0
+:102020003C010800AC2F045C3C010800AC2E0458B5
+:102030008F4C0000398B0001316A00011540FFED23
+:1020400001A04021AF8D00348E4E00003C0C0800F2
+:102050008D8C045C3C0A08008D4A045801C8682332
+:10206000018D28210000582100AD302B014B20218B
+:10207000008610213C010800AC25045C3C010800EE
+:10208000AC2204588F4501088F44010030A920007C
+:10209000AF850000AF84000C1120000A00A03021A1
+:1020A0003C0708008CE7042C24EF00013C010800E9
+:1020B000AC2F042C3C104000AF5001380A000190B6
+:1020C0000000000030B002001600001424110F00C0
+:1020D0001091001224070D001087023330B0000663
+:1020E0005200FFF53C104000936D0000240C0010DE
+:1020F00031A600F010CC0269240E007010CE02DD73
+:102100008F8B001425670001AF8700143C1040003E
+:10211000AF5001380A000190000000009748010408
+:102120001100FFE53C10400030B84000170000A24D
+:10213000000000008F5901780720FFFE8F870038CC
+:1021400024090008240508008CE30008AF45017845
+:10215000A7490140A7400142974201048F86000031
+:102160003049FFFF30DF000113E002D5012040219C
+:102170002524FFFE240A0002A74A01463088FFFFFB
+:10218000A74401483C0B08008D6B043C156002C459
+:102190008F8F000C30C3002014600002240400095B
+:1021A0002404000130CD0C00240C040051AC0001CB
+:1021B00034840004A744014A3C0508008CA504208F
+:1021C0003C0200483C19000100A2F82530D800026A
+:1021D00003F9282513000004000018213C04010025
+:1021E00000A428252403000130CA00045140000542
+:1021F000AF8300083C06001000A628252403000138
+:10220000AF830008AF451000000000000000000090
+:1022100000000000000000008F8300081060002311
+:10222000000000008F4B10000561FFFE0000000061
+:102230001060001E000000008F4D10003C030020C5
+:1022400001A36024118000198F8F000031EE00027D
+:1022500011C0001600000000975010141600001363
+:10226000000000009745100830BFFFFF27F8000668
+:102270000018C8820019308000C7282133110001DE
+:1022800033030003122003208CA200000000000D85
+:1022900000C7F821AFE200003C1908008F39043074
+:1022A000272600013C010800AC2604308F6A00009C
+:1022B0003405FFFFAF8A00048CE200001045029A4B
+:1022C000000020218CE5000030BF010013E0027EF9
+:1022D000010020213C0708008CE704743C10080032
+:1022E0008E10044C00E858213C1808008F18047028
+:1022F0000168882B3C0808008D08044800007821FC
+:1023000002046021030F18210184702B010F682142
+:102310000071502101AE10213C010800AC2C044C8E
+:102320003C010800AC2204483C010800AC2B0474BA
+:102330003C010800AC2A04708F8D00180120302168
+:102340003129000725AE000831C21FFF034260217A
+:10235000AF8D001CAF820018259B4000AF42008467
+:10236000112000038F90002024C800073106FFF8D9
+:102370008F84002800D0282100A4782B15E00002CB
+:10238000AF90002400A428230345202134038000BB
+:10239000008310213C061000AF850020AF8200387A
+:1023A000AF450080AF4601788F8B00142567000190
+:1023B0000A0001DDAF8700148F6200088F670000FC
+:1023C000241100300007C602330300F0107100A290
+:1023D000241900401479FF4B8F8B00148F4A017829
+:1023E0000540FFFE30A7020014E000030005128242
+:1023F0000000000D0005128230500003001049005B
+:1024000001307021000E688001B06021000C5880FE
+:10241000017380218E0800001500000200000000FA
+:102420000000000D8F6F000405E202B19203000668
+:1024300092070005920F00043C020001000728806B
+:1024400000B060218D8900182771000825EE000575
+:1024500001226821000E3082AD8D0018022020215B
+:102460000E00058026050014920B00068F7F0004E5
+:102470003C087FFF000B2080009130218CC30004BA
+:10248000350AFFFF03EAC8240079C021ACD8000454
+:102490009207000592090004960D000800072880A5
+:1024A00000B1F8218FEF0000974201043C07FFFFC5
+:1024B00001E75024304EFFFF01C96021018D5823F0
+:1024C0003168FFFF01482025AFE4000092030007B8
+:1024D00024190001107902692406000310660279AC
+:1024E000000000008E190010241F000AA75F0140A1
+:1024F000A7590142920300048F86000024070001BF
+:10250000A7430144A74001469758010430D1000277
+:102510003C050041A758014800001821A747014A7F
+:102520001220000330CA00043C05014124030001CD
+:1025300051400005AF8300083C08001000A8282582
+:1025400024030001AF830008AF4510000000000025
+:102550000000000000000000000000008F8B000859
+:1025600011600004000000008F4410000481FFFE91
+:10257000000000008F6A0000920700043C0508007C
+:102580008CA50444AF8A0004975F01043C0F080047
+:102590008DEF044030E300FF33F9FFFF0079C021E5
+:1025A00000B868210000102124E6000A30C8FFFFAF
+:1025B00001B8482B01E2702101C9602131100007E8
+:1025C0003C010800AC2D04443C010800AC2C044044
+:1025D000120000038F8D0018250B00073168FFF8EB
+:1025E000010D702131CC1FFFAF8D001CAF8C001886
+:1025F000AF4C008497440104034C80213084FFFFDA
+:102600003088000711000003261B400024890007C2
+:102610003124FFF88F8200208F850028008220213E
+:102620000085782B15E00002AF820024008520236E
+:102630000344882134058000022510213C06100047
+:10264000AF840020AF820038AF440080AF460178ED
+:102650000A0002858F8B00148F5F017807E0FFFE70
+:1026600030AA020015400003000542820000000D60
+:1026700000054282310200030002710001C268219C
+:10268000000D6080018248210009288000B380216C
+:102690008E0B000011600002000000000000000D21
+:1026A0008F6F000C05E001F38F87003824190001BB
+:1026B000AE1900008CE30008A20000078F78000428
+:1026C00000181C02306600FF24D100050011308282
+:1026D0002CC4004114800002A20300040000000D7D
+:1026E0008F6B00043C0EFFFF00E028213164FFFFE8
+:1026F000248F000B000F4082000810800047482103
+:102700008D2D000026040014A60B000801AE6024E5
+:102710000E000580AD2C00008F5F01083C0A100000
+:1027200003EA382410E001A30000000097460104EA
+:102730009203000724D1FFEC346500023224FFFF2E
+:10274000A2050007960600082CC7001354E00005F8
+:1027500092030007920A0007355F0001A21F0007DD
+:1027600092030007240B0001106B01BA2409000337
+:10277000106901CD8F88003830CFFFFF25E40002BB
+:102780000004C883333F00FF001F2880A219000502
+:1027900000A858218D780000975101043C03FFFFE9
+:1027A000030360243222FFFF004F702325CDFFFE7C
+:1027B000018D4825AD690000920600053C02FFF638
+:1027C000344EFFFF30CA00FF000A388000F020219D
+:1027D000909900143C1FFF7F37E7FFFF3323000F62
+:1027E0000066782131F800FF0018288000B08821A9
+:1027F0008E2D002000A86021A20F000601AE482403
+:10280000AE0D000CAD89000C920B00068E04000C7E
+:102810000127F824000B50800150C821972600267C
+:102820000148C02100874024AF260024AE08000CD8
+:10283000AF3F0020AF0600108F860000240C001070
+:1028400024090002A74C0140A7400142A7400144CF
+:10285000A7490146974B01042407000130C8000234
+:10286000256AFFFEA74A01483C050009A747014A1F
+:1028700011000003000018213C0501092403000198
+:1028800030CD000451A00005AF8300083C060010C5
+:1028900000A6282524030001AF830008AF451000DF
+:1028A0000000000000000000000000000000000028
+:1028B0009218000427110002322F0007000F102386
+:1028C000304E0007AE0E00108F900008120000047A
+:1028D000000000008F4310000461FFFE00000000B4
+:1028E0008F7800008F8F00183C1008008E10044471
+:1028F000AF9800049751010425E6001030CA1FFF6D
+:102900003222FFFFAF8F001CAF8A0018AF4A00844D
+:102910002449FFFE3C0B08008D6B0440974E0104D8
+:1029200001206821000967C3020D282131C9FFFF7A
+:1029300000AD402B016C382100E82021034AF8212A
+:10294000313900073C010800AC2504443C01080073
+:10295000AC2404401320000327FB4000252300077C
+:102960003069FFF88F9F00208F840028013F3821B5
+:1029700000E4C82B17200002AF9F002400E4382396
+:102980000347202134058000008510213C061000FB
+:10299000AF870020AF820038AF470080AF46017894
+:1029A0000A0002858F8B0014975801041300FDC2A2
+:1029B0003C1040008F4301780460FFFE30B94000B6
+:1029C000132000033C0400080000000D3C04000834
+:1029D000AF44014024080800AF4801788F8B000005
+:1029E000974A0104317F000113E000E93146FFFFFF
+:1029F00024D0FFFE240C0002A74C0146A75001483A
+:102A00008F8F00182405000DA745014A8F71000023
+:102A100025E2000830491FFF0349702130CD00072F
+:102A2000AF910004AF8F001CAF89001800C038219F
+:102A3000AF49008411A0000325DB400024C6000735
+:102A400030C7FFF88F9800208F84002800F83021CD
+:102A500000C4382B14E00002AF98002400C43023D7
+:102A60008F8A001403465821340880000168F82139
+:102A7000255900013C0310003C104000AF860020A7
+:102A8000AF9F0038AF460080AF430178AF99001484
+:102A9000AF5001380A000190000000008F6900006B
+:102AA000974401043127FFFF3088FFFF8F4F0178E3
+:102AB00005E0FFFE30FF0007001F182330780007F5
+:102AC00024E6FFFE2419000AA7590140A758014235
+:102AD000A7460144A7400146A74801488F42010884
+:102AE00030510020162000022403000924030001B5
+:102AF00030AA0002A743014A3C04004111400003F0
+:102B0000000018213C0401412403000130AB000403
+:102B100051600005AF8300083C05001000852025AA
+:102B200024030001AF830008AF4410000000000040
+:102B30000000000000000000000000008F9000086E
+:102B400012000004000000008F4C10000581FFFE01
+:102B5000000000008F780000276200088F8D003C85
+:102B6000AF980004944600089451000A944F000C5A
+:102B700030CEFFFF0011240031E9FFFF11CD00A28C
+:102B8000008920253C0308008C6304443C1808009D
+:102B90008F18044000E85021255FFFFE007F782158
+:102BA0000000102101FF302B03028821022648215A
+:102BB0003C010800AC2F04443C010800AC2904404F
+:102BC00024EB00083162FFFF3047000710E00003EC
+:102BD0008F850018245000073202FFF83106FFFFEE
+:102BE00030C800070045702131CD1FFF034D602123
+:102BF000AF85001CAF8D0018259B4000AF4D0084B1
+:102C0000110000038F8F002024C400073086FFF8D6
+:102C10008F84002800CF282100A4482B1520000213
+:102C2000AF8F002400A42823AF850020AF4500808B
+:102C30003C1108008E3104340345C0213402800069
+:102C40000302302112200005AF860038938300175D
+:102C50002419000E1079000D241F043F3C0A1000B7
+:102C6000AF4A01788F8B0014256700010A0001DD4F
+:102C7000AF8700140E0005A63C1040008F8B001497
+:102C8000256700010A0001DEAF8700143C0A10002E
+:102C9000A75F0148AF4A01780A0004B48F8B001483
+:102CA000240E0F0011EE003D30D10020162000024E
+:102CB00024030009240300010A000208A743014A73
+:102CC0000A0001FBA740014694E5000894E2000ACF
+:102CD00094EB000C8F86003C0002FC00316AFFFF81
+:102CE00030B9FFFF1326003703EA20253C05080012
+:102CF0008CA504443C1F08008FFF044000005021B5
+:102D000000A8382100E8302B03EAC8210326C0219F
+:102D10003C010800AC2704443C010800AC380440E6
+:102D20000A0002698F8D00183C1908008F39047C55
+:102D30003C0308008C6304543C0608008CC60478ED
+:102D40003C0F08008DEF04500328382100686821EB
+:102D500000E8C02B00C4882101A8402B01E47021A9
+:102D60000238582101C860213C010800AC2D0454F0
+:102D70003C010800AC2C04503C010800AC27047C4A
+:102D80003C010800AC2B04780A0002698F8D001802
+:102D9000A74001460A00041B8F8F001830D0002086
+:102DA0001600FFC52403000D240300050A000208D5
+:102DB000A743014A975901042738FFF00A00036B23
+:102DC0003304FFFF8F8C0040148CFFC8000080216B
+:102DD0003C1108008E31046C3C0408008C840468AB
+:102DE0000228702101C8782B00904021010F682132
+:102DF0003C010800AC2E046C3C010800AC2D0468BA
+:102E00000A0002698F8D00188F9900401499FF5DA8
+:102E1000000060213C0508008CA5046C3C100800F3
+:102E20008E10046800E82021248EFFFE00AEF821F9
+:102E300003EE582B020C5021014B18213C010800D5
+:102E4000AC3F046C3C010800AC2304680A00048B0E
+:102E500024EB00088F8800383C02FFFF8D0E000C29
+:102E600001C2682401A46025AD0C000C0A0003799E
+:102E700030CFFFFF0A0003A9AE000000974B01040A
+:102E8000920400048E2A000C01644021251FFFF2E9
+:102E90000147182433F9FFFF0079C025AE38000C34
+:102EA0000A0002D48E1900103C03FFFF8D110010A0
+:102EB0000223282400A47825AD0F00100A0003790E
+:102EC00030CFFFFF97450104920600048E2F0010BB
+:102ED00000A610212449FFEE01E76824312EFFFFF0
+:102EE00001AE6025AE2C00100A0002D48E1900102D
+:102EF0008E06000CAE0000000003C0800310882185
+:102F00000A0002A6AE2600201460000D3050FFFF1C
+:102F10003C04FFFF0044602401846826000D582B08
+:102F2000000C502B014B1024104000020000000048
+:102F30000000000D8CA300000A00023E0064102572
+:102F40003A11FFFF0011782B0010702B01CF2024C5
+:102F500010800002000000000000000D8CB800008E
+:102F60000A00023E3702FFFF3084FFFF30A5FFFF5B
+:102F7000108000070000182130820001104000027C
+:102F800000042042006518211480FFFB0005284042
+:102F900003E000080060102110C0000700000000DE
+:102FA0008CA2000024C6FFFF24A50004AC82000010
+:102FB00014C0FFFB2484000403E0000800000000AC
+:102FC00010A0000824A3FFFFAC8600000000000052
+:102FD000000000002402FFFF2463FFFF1462FFFAD9
+:102FE0002484000403E0000800000000308EFFFF8E
+:102FF00030D8FFFF00057C0001F8602539CDFFFFC8
+:1030000001AC5021014C582B014B482100094402CE
+:103010003127FFFF00E830210006240230C5FFFF02
+:1030200000A418213862FFFF03E000083042FFFFD0
+:103030003C0C08008D8C0484240BFF8027BDFFD03E
+:1030400001845021014B4824AF4900203C0808006E
+:103050008D080484AFB20020AFB00018AFBF0028C5
+:10306000AFB30024AFB1001C936600040104382103
+:1030700030E4007F009A10213C03000800439021B7
+:1030800030C50020036080213C080111277B000827
+:1030900014A00002264600702646006C921300041D
+:1030A00097510104920F00043267000F322EFFFF88
+:1030B00031ED004001C7282311A000050000482180
+:1030C000925900BC33380004170000900000000043
+:1030D000924300BC307F000413E0000F00000000AA
+:1030E00010A0000D00000000960E0002240AFF80D0
+:1030F00000A7602125CDFFFEA74D1016920B0004FE
+:10310000014B2024308200FF10400085010C402537
+:103110003C0F0400010F40258F5301780660FFFE2D
+:103120002404000AA7440140960D0002240400096B
+:1031300031AC0007000C5823316A0007A74A01424E
+:10314000960200022443FFFEA7430144A740014624
+:10315000975F0104A75F01488F59010833380020A9
+:103160005300000124040001920F000431EE00100E
+:1031700015C000023483001000801821A743014AC3
+:10318000000000000000000000000000000000003F
+:10319000AF48100000000000000000000000000028
+:1031A000000000008F5110000621FFFE3113FFFFC9
+:1031B00012600003000000008F481018ACC8000027
+:1031C00096030006307FFFFF27F90002001998825E
+:1031D00000138880023B30218CD800001520005756
+:1031E00000183402920300042405FF8000A3F82491
+:1031F00033F100FF1220002C00000000924700BCB9
+:1032000030F200021240002800000000974B100C22
+:103210002562FFFEA7421016000000003C0A0400D1
+:1032200035490030AF4910000000000000000000E8
+:1032300000000000000000008F4C10000581FFFE20
+:10324000000000009749100C8F51101C00C0202175
+:103250003127FFFF24F2003000121882000328807B
+:1032600000BBF8213226FFFFAFF100000E000595EC
+:1032700000112C020013C880033B98218E780000B7
+:1032800000027400AFB800108FA80010310FFFFFCC
+:10329000AFAF00108FA4001001C46825AFAD0010BF
+:1032A0008FA60010AE66000097730008976D000AA5
+:1032B0009766000C8F8A003C000D5C0030CCFFFF4D
+:1032C0003262FFFF104A0036016C2025960600028C
+:1032D0003C10100024D300080E0001393264FFFFB7
+:1032E000974C01040E0001473184FFFFAF50017875
+:1032F0008FBF00288FB300248FB200208FB1001C35
+:103300008FB0001803E0000827BD003010A0FF7048
+:103310000000000024A5FFFC0A0005CE24090004DB
+:103320008CD10000AF5110188F5301780660FF7ADE
+:103330002404000A0A0005E30000000000A7C821D9
+:103340008F8800388F4E101C0019C08200187880BA
+:1033500001E82021AC8E0000000E2C0200C02021CC
+:103360000E00059531C6FFFF023B28218CAD000001
+:103370000002540000403021AFAD00108FAC0010AF
+:10338000318BFFFFAFAB00108FA200100142482528
+:10339000AFA900108FA700100A000613ACA7000009
+:1033A0008F8F0040148FFFC9000000009742010476
+:1033B000960B00023C0508008CA5046C3049FFFF09
+:1033C000316AFFFF3C1108008E310468012A382160
+:1033D00024F2FFFE00B240210012FFC30112C82BED
+:1033E000023FC021031920213C010800AC28046CD5
+:1033F0003C010800AC2404680A00064D00000000EF
+:1034000000A4102B104000092403000100052840EF
+:1034100000A4102B04A00003000318405440FFFC3C
+:103420000005284010600007000000000085302BD8
+:1034300014C0000200031842008520231460FFFB23
+:103440000005284203E00008008010218F85002C31
+:1034500027BDFFE8000530272CC300012CA4000283
+:103460000083102510400003AFBF00102405007F2B
+:10347000AF85002C0005282730A5FFFF0E0005743E
+:10348000240426F58F830030240402BD004030213F
+:103490000083382B10E000092405000100042040BF
+:1034A0000083102B04800003000528405440FFFCDB
+:1034B0000004204010A0000800C350210064402BED
+:1034C00015000002000528420064182314A0FFFB29
+:1034D0000004204200C350218FBF0010000A4C029C
+:1034E000312200FF27BD0018AF8A002C03E000083E
+:0434F000AF89003070
+:0C34F4000A00002A000000000000000098
+:103500000000000D747870352E302E306A360000C1
+:10351000050000000000000A000001360000EA601B
+:10352000000000000000000000000000000000009B
+:10353000000000000000000000000000000000008B
+:10354000000000000000000000000000000000007B
+:103550000000000000000016000000000000000055
+:10356000000000000000000000000000000000005B
+:10357000000000000000000000000000000000004B
+:1035800000000000000000000000000000001388A0
+:1035900000000000000005DC00000000000000004A
+:1035A00010000003000000000000000D0000000DEE
+:1035B0003C02080024423B603C03080024633D14A5
+:1035C000AC4000000043202B1480FFFD2442000487
+:1035D0003C1D080037BD7FFC03A0F0213C10080013
+:1035E000261000A83C1C0800279C3B600E0002BA75
+:1035F000000000000000000D8F8300383C088000B0
+:10360000350700708CE50000008330253C029000F7
+:1036100000C22025AF850030AF4400208F49002034
+:103620000520FFFE3C038000346200708C450000E2
+:103630008F8600303C1908008F39007C3C0E080052
+:103640008DCE007800A62023032458210000782185
+:103650000164682B01CF6021018D50213C010800DD
+:10366000AC2B007C3C010800AC2A007803E0000889
+:10367000000000000A000041240400018F8400388B
+:103680003C05800034A200010082182503E00008F8
+:10369000AF43002003E00008000010213084FFFF4A
+:1036A00030A5FFFF108000070000182130820001C4
+:1036B0001040000200042042006518211480FFFB26
+:1036C0000005284003E000080060102110C000073A
+:1036D000000000008CA2000024C6FFFF24A5000407
+:1036E000AC82000014C0FFFB2484000403E0000847
+:1036F0000000000010A0000824A3FFFFAC8600001B
+:1037000000000000000000002402FFFF2463FFFF10
+:103710001462FFFA2484000403E0000800000000A3
+:10372000308AFFFF93A80013A74A014497490E1659
+:1037300030C600FF3C021000A7490146AF450148D2
+:10374000A3460152A748015AAF4701608FA4001851
+:103750008FA30014A7440158AF43015403E00008AD
+:10376000AF42017803E00008000000003C03800045
+:10377000346200708C4900008F88000024840007A8
+:1037800027BDFFF83084FFF8AF890030974D008ADD
+:1037900031ACFFFFAFAC00008FAB000001685023DD
+:1037A0002547FFFF30E61FFF00C4282B14A0FFF7BA
+:1037B0003C0C8000358B00708D6A00003C070800CF
+:1037C0008CE700843C0608008CC60080000810824C
+:1037D000014918230002788000E3702100002021B5
+:1037E00001C3C82B00C4C02101FA4021031948219C
+:1037F0002502400027BD00083C010800AC2E0084D3
+:103800003C010800AC29008003E000080000000033
+:103810008F8200002486000730C5FFF800A218211F
+:1038200030641FFF03E00008AF8400008F8700387A
+:103830008F8A004027BDFFB88F860044AFB6004096
+:10384000AFBF0044AFB5003CAFB40038AFB30034F5
+:10385000AFB20030AFB1002CAFB000288F450104EB
+:103860008D4900ACAF4700808CC8002000A93823E8
+:103870000000B021AF480E108F440E100000482108
+:10388000AF440E148CC20024AF420E188F430E18A2
+:10389000AF430E1C10E001252D230001936B00089F
+:1038A000116000D400000000976E001031CDFFFFC2
+:1038B00000ED602B158000CF000000009770001015
+:1038C000320FFFFFAF4F0E008F5200003251000841
+:1038D0001220FFFD0000000097540E088F460E04D2
+:1038E0003285FFFF30B3000112600132000000009A
+:1038F0000000000D30B8A04024150040131500C092
+:1039000030A9A0001120012D00000000937F0008C5
+:1039100013E000080000000097630010306BFFFF09
+:1039200000CB402B1100000330AC0040118001237C
+:1039300000000000A785003CAF86003493660008B5
+:1039400000E02821AFA7002014C0012427B30020E5
+:10395000AF60000C9782003C3047400014E000024A
+:10396000240300162403000E24194007A363000A51
+:10397000AF790014938A003E8F7400143158000709
+:103980000018AA4002959025AF7200149784003C5D
+:103990008F7000143091001002117825AF6F001461
+:1039A000978E003C31CD000811A00147000028216E
+:1039B0008F6700143C0210003C0C810000E22825B7
+:1039C000AF65001497460E0A2408000E3405FFFC6C
+:1039D00030C3FFFF006C5825AF6B0004A3680002E2
+:1039E000937F000A27E90004A369000A9786003C38
+:1039F0009363000A30CC1F00000C598301634021FF
+:103A0000251F0028A37F000997490E0CA769001005
+:103A100093790009272A0002315800070018A823CB
+:103A200032B10007A371000B937400099764001072
+:103A30008F910034978F003C329200FF0244802126
+:103A40000205702131ED004011A0000531C4FFFFD7
+:103A50000091282B3C12800010A000140000A0212F
+:103A60000224382B14E0011B8FA500208F4D0E146B
+:103A7000AF4D0E108F420E1CAF420E18AF440E0019
+:103A80008F4F000031EE000811C0FFFD0000000064
+:103A900097540E080080882100009021A794003CD4
+:103AA0008F500E0424140001AF900034976400106E
+:103AB0003095FFFF8E6800000111F82317E0000920
+:103AC000AE7F00008F6500148F8B004434A6004049
+:103AD000AF6600148F4C0E10AD6C00208F430E1893
+:103AE000AD6300249367000814E000D200000000DA
+:103AF0000E00009E240400108F8900483C0832000C
+:103B000000402821312600FF0006FC0003E8502574
+:103B100025390001AF990048AC4A000093780009AC
+:103B20009370000A330400FF00047400320F00FF9A
+:103B300001CF6825AC4D00048F820048064000EAA2
+:103B4000ACA20008ACA0000C9783003C306B0008CE
+:103B5000156000022628000626280002974E0E1443
+:103B60008F450E1C8F670004936D000231C4FFFF68
+:103B700031A200FFAFA200108F6C0014AFA8001894
+:103B80000E00008BAFAC0014240400100E0000C720
+:103B9000000000008E7200001640000500000000CA
+:103BA0008F6400142405FFBF00859824AF730014B0
+:103BB0008F79000C03353821AF67000C937500082E
+:103BC00016A000080000000012800006000000009F
+:103BD0008F7F00143C0BEFFF3568FFFE03E848249D
+:103BE000AF690014A37400088FA500200A000246E4
+:103BF00002202021AF470E000A0000F5000000005F
+:103C00008F5901780720FFFE241F08008F840000D1
+:103C1000AF5F0178974B008A316AFFFF0144482368
+:103C20002528FFFF31021FFF2C4300081460FFF915
+:103C3000000000008F8E00488F8D003800C04821A2
+:103C40000344202125C60001240C0F00AF86004844
+:103C500000E938232486400031CA00FF11AC00057A
+:103C6000240800019391003E3230000700107A4092
+:103C700035E80001000AAC003C18010002B8A0259C
+:103C8000AC9440008F93004830B2003630A4000856
+:103C9000ACD300041080009701123025974E0E0A15
+:103CA0008F8D00003C02810031CCFFFF25AB000866
+:103CB000018240253C03100031651FFF25390006B5
+:103CC000241F000EAF48016000C33025A75F015AD2
+:103CD000AF850000A759015814E0000A8F930038FF
+:103CE00024120F00527200022416000134C6004054
+:103CF0008F580E108F940044AE9800208F550E18E8
+:103D0000AE9500248F450E14AF4501448F590E1C0B
+:103D1000AF590148A34A01523C0A1000AF46015472
+:103D2000AF4A017814E0FEDD2D2300010076A025C6
+:103D3000128000178FBF00448F84003824160F00B4
+:103D400010960084000000008F45017804A0FFFE5B
+:103D500024150F001095006E000000008F470E1410
+:103D6000240202403C1F1000AF4701448F440E1C48
+:103D7000AF440148A3400152A740015AAF4001603F
+:103D8000A7400158AF420154AF5F01788FBF004494
+:103D90008FB600408FB5003C8FB400388FB300342D
+:103DA0008FB200308FB1002C8FB0002803E00008E4
+:103DB00027BD004814C0FED030B8A0408F420E147A
+:103DC0008F84004400004821AC8200208F510E1CDB
+:103DD000AC9100240A00020E2D2300018F910034C3
+:103DE000978A003C3C1280000220A82131580040F4
+:103DF0001700FF300000A021976900108F92003457
+:103E00003139FFFF133200350000202100804821A6
+:103E10001480FEA000A038218F420E148F8400442D
+:103E2000AC8200208F510E1CAC9100240A00020EBF
+:103E30002D230001936A00099378000B315000FF95
+:103E4000330F00FF020F702125C2000A3050FFFF20
+:103E50000E00009E020020218F8600483C1F41007A
+:103E600024CD0001AF8D0048936C000930C600FFDF
+:103E700000064400318300FF246B0002010B48253B
+:103E8000013FC825AC5900008F67000C97440E1401
+:103E900000F22825AC4500048F450E1C8F670004F6
+:103EA000936A00023084FFFF315800FFAFB8001062
+:103EB0008F6F0014AFB100180E00008BAFAF00146D
+:103EC0000A0001A602002021AF6000040A00013EA2
+:103ED000A36000020A000246000020210000902199
+:103EE0000A000170241400013C1280000A000195B0
+:103EF000ACB2000C8F91000025240002A7440158A9
+:103F000026300008320F1FFF0A0001F9AF8F0000B2
+:103F1000AF40014C1120002C000000008F590E1002
+:103F2000AF5901448F430E18240200403C1F10007B
+:103F3000AF430148A3400152A740015AAF4001607E
+:103F4000A7400158AF420154AF5F01780A00022731
+:103F50008FBF0044112000060000000097460E08A5
+:103F600030CC004015800002000000000000000D71
+:103F70008F4D017805A0FFFE0000000097530E1042
+:103F80003C120500240E2000326AFFFF0152C025BA
+:103F9000AF58014C8F4F0E143C021000AF4F01443C
+:103FA0008F500E1CAF500148A34001528F8400383F
+:103FB000A740015AAF400160A7400158AF4E0154DD
+:103FC0000A000215AF4201788F490E14AF4901442F
+:103FD0008F430E1C0A00028E240200403C0E20FF7C
+:103FE00027BDFFE03C1A80003C0F800835CDFFFD67
+:103FF000AFBF001CAFB20018AFB10014AFB00010DB
+:10400000AF8F0040AF4D0E00000000000000000028
+:104010000000000000000000000000003C0C00FF59
+:10402000358BFFFDAF4B0E003C0660048CC9500081
+:10403000240AFF7F3C116000012A40243507380C18
+:10404000ACC750008E24043824050009AF45000891
+:104050003083FFFF38622F712450C0B3AF80004817
+:104060000E000068AF80000052000001AE20442C1A
+:104070000E0004353C1180000E000EA83630007092
+:104080008F8A00403C12080026523BC8020088215B
+:104090008E0800008F5F00003BF9000133380001FB
+:1040A00013000017AF880030022048218D27000040
+:1040B0003C0F08008DEF006C3C0C08008D8C0068F4
+:1040C00000E8C02301F828210000682100B8302B47
+:1040D000018D5821016640213C010800AC25006C8F
+:1040E0003C010800AC2800688F44000038830001C0
+:1040F000306200011440FFED00E04021AF87003046
+:104100008E0C00003C0508008CA5006C3C040800E7
+:104110008C8400680188302300A63821000010211B
+:1041200000E6402B008218210068F8213C010800BD
+:10413000AC27006C3C010800AC3F00688F490100CF
+:1041400025590088AF990044AF890038AF49002055
+:104150008E070000AF8700308F4D017805A0FFFE6D
+:10416000000000008E0600003C0B08008D6B007400
+:104170003C0408008C84007000C728230165F821E6
+:104180000000102103E5402B0082382100E8C821FF
+:10419000240908003C010800AC3F00743C01080001
+:1041A000AC390070AF49017893580108A398003EDC
+:1041B000938F003E31EE000115C000158F8300384B
+:1041C000240E0D00106E0019240F0F00106F001D3B
+:1041D000000000009159000024180050332900FF0E
+:1041E000113800043C1F4000AF5F01380A0002E7AD
+:1041F000000000000E0008EE000000008F8A004062
+:104200003C1F4000AF5F01380A0002E700000000D9
+:10421000938D003E31AC0006000C51000E0000CE24
+:104220000152D8210A0003438F8A00403C1B08003A
+:10423000277B3C480E0000CE000000000A0003432C
+:104240008F8A00403C1B0800277B3C680E0000CE94
+:10425000000000000A0003438F8A004090AA00017A
+:104260008FAB00108CAC00103C0300FF8D68000485
+:10427000AD6C00208CAD001400E060213462FFFFC3
+:10428000AD6D00248CA700183C09FF000109C02473
+:10429000AD6700288CAE001C0182C8240319782564
+:1042A000AD6F0004AD6E002C8CAD0008314A00FFEC
+:1042B000AD6D001C94A900023128FFFFAD6800100D
+:1042C00090A70000A5600002A1600004A1670000A3
+:1042D00090A30002306200FF000219821060000506
+:1042E000240500011065000E0000000003E0000836
+:1042F000A16A00018CD80028354A0080AD780018EA
+:104300008CCF0014AD6F00148CCE0030AD6E000861
+:104310008CC4002CA16A000103E00008AD64000C0D
+:104320008CCD001CAD6D00188CC90014AD69001453
+:104330008CC80024AD6800088CC70020AD67000C55
+:104340008CC200148C8300640043C82B1320000728
+:10435000000000008CC20014144CFFE400000000B8
+:10436000354A008003E00008A16A00018C820064E5
+:104370000A0003990000000090AA000027BDFFF882
+:104380008FA9001CA3AA00008FAE00003C0FFF8085
+:104390008FA8001835E2FFFF8CCD002C01C26024ED
+:1043A000AFAC0000A120000400E06021A7A0000243
+:1043B0008FB800008D2700040188182100A0582123
+:1043C00000C05021006D28263C06FF7F3C0F00FFF7
+:1043D0002CAD000135EEFFFF34D9FFFF3C02FF009A
+:1043E00003193024000D1DC0010EC82400E2C024B2
+:1043F00000C3702503197825AD2E0000AD2F0004F1
+:104400008D450024AFAE0000AD2500088D4D002085
+:104410002405FFFFAD2D000C956800023107FFFF5A
+:10442000AD2700109166001830C200FF000219C2CB
+:10443000506000018D450034AD2500148D670008E3
+:1044400027BD0008AD27001C8C8B00CCAD2C0028AC
+:10445000AD20002CAD2B0024AD20001803E0000897
+:10446000AD20002027BDFFE0AFB20018AFB10014AF
+:10447000AFB00010AFBF001C9098000000C08821B2
+:104480003C0D00FF330F007FA0CF0000908E000195
+:1044900035ACFFFF3C0AFF00A0CE000194A6001E31
+:1044A000A22000048CAB00148E29000400A08021FF
+:1044B000016C2824012A4024008090210105202538
+:1044C000A6260002AE2400042605002026240008AB
+:1044D0000E00007624060002924700002605002800
+:1044E0002624001400071E000003160324060004FF
+:1044F000044000032403FFFF965900023323FFFF0B
+:104500000E000076AE230010262400248FBF001C6E
+:104510008FB200188FB100148FB000102405000373
+:10452000000030210A00008027BD002027BDFFD8F1
+:10453000AFB1001CAFB00018AFBF002090A80000C2
+:10454000240200018FB0003C3103003F008088212D
+:10455000106200148FAA0038240B0005506B00165F
+:10456000AFAA001000A0202100C028210E0003DC0B
+:1045700002003021922400BC30830002106000034E
+:1045800026060030ACC0000024C600048FBF002007
+:104590008FB1001C8FB0001800C0102103E000088C
+:1045A00027BD0028014038210E00035AAFB000108B
+:1045B0000A000420000000000E0003A1AFB00014A8
+:1045C0000A000420000000003C02000A03421821F7
+:1045D0003C04080024843CAC2405001A000030216F
+:1045E0000A000080AF8300543C03800034620070F6
+:1045F0008C48000000A0582100C04821308A00FFEC
+:10460000AF8800308F4401780480FFFE3C0C8000AE
+:10461000358600708CC500003C0308008C63007474
+:104620003C1808008F18007000A82023006468213F
+:104630000000C82101A4782B0319702101CF60214B
+:104640003C010800AC2D00743C010800AC2C00704B
+:104650008F480E14AF480144AF47014CA34A0152A2
+:10466000A74B01589346010830C5000854A000012B
+:1046700035291000934B090024070050316A00FFD0
+:1046800011470007000000008F450E1CAF45014890
+:10469000AF4901543C09100003E00008AF4901781C
+:1046A000934D010831A8000811000010000000001F
+:1046B000934F010831EE001051C000013529000868
+:1046C0003C04080090843D10A34401508F4309A48A
+:1046D000AF4301488F4209A0AF420144AF490154A2
+:1046E0003C09100003E00008AF4901783C190800BC
+:1046F0008F393CCC333800085700FFF135290008CA
+:104700000A0004730000000024070040AF470814AB
+:10471000AF4008108F4209448F4309508F44095419
+:104720008F45095C8F46094CAF820064AF8300500F
+:10473000AF84004CAF85005C03E00008AF860060EA
+:104740009346010930C5007F000518C000052140CF
+:104750000083102103E00008244200883C0A08007E
+:10476000914A3CD13C09080095293CCA3C051100FE
+:10477000000A3C002528000200E8302500C5182565
+:1047800024820008AC83000003E00008AC80000431
+:104790008F4A002C974E09083C0F000E034F38211A
+:1047A00031CDFFFF000D41C0AF48002C97430908F1
+:1047B00094EC001A0080402124020001318BFFFF9D
+:1047C000AC8B00008CE9001C00A0582100C06021C7
+:1047D000AC8900048CE40020AD04000890E30019CB
+:1047E00030630003106200400000000028650002F2
+:1047F00014A00073240600021066004E00000000A2
+:104800002418000310780057000000003C0908003D
+:1048100095293CC093450934934609213C0E080074
+:1048200095CE3CC630A200FF0002C88294E5002A63
+:1048300030C400FF978700580019C60000041C0010
+:10484000312FFFFF0303102501CF6821004DC8253C
+:1048500000A720213C0640000326C02500044C0090
+:10486000AD090004AD180000934F09203C03000679
+:1048700025090014000F760001C36825AD0D00085E
+:104880008F42092C24E5000130A67FFFAD02000C09
+:104890008F59093025020028A7860058AD1900104D
+:1048A0008F440938AD040014AD2B00048F58094023
+:1048B000AD380008934F09373C0D080091AD3CD04E
+:1048C000AD20001031EE00FF01CC1821000367007D
+:1048D000000D4400018858253567FFFFAD27000C07
+:1048E00003E00008AF4A002C3C09080095293CC0B1
+:1048F0003C05080094A53CCA3C0F080095EF3CBC61
+:1049000094E400243126FFFF00A6702101CF682324
+:1049100000041C0025A2FFF20062C825241808002C
+:10492000AD19000CAD180014AD0000100A0004C849
+:104930002508001894E6002494E500283C090800A6
+:1049400095293CC000067C000005740035ED81000F
+:1049500035C40800AD0D000CAD0400100A0004C8F9
+:10496000250800143C09080095293CC03C020800B9
+:1049700094423CCA3C06080094C63CBC94E4002423
+:104980003125FFFF94F800280045C821032678232D
+:1049900000181C0000046C0025EEFFEE006EC82518
+:1049A00035A2810024180800AD02000CAD190010DA
+:1049B000AD180018AD0000140A0004C82508001C3A
+:1049C0001460FF920000000094E300243C090800FA
+:1049D00095293CC00003140034590800AD19000C9F
+:1049E0000A0004C82508001003E00008240201F4AE
+:1049F00027BDFFE8AFB00010AFBF00140E0000608D
+:104A00000080802124050040AF4508148F830050AA
+:104A10008F84004C8F85005C007018210064102387
+:104A200018400004AF830050AF6300548F660054F9
+:104A3000AF86004C1200000C000000008F44007490
+:104A4000936800813409FA002D07000710E0000583
+:104A500000891021936C0081240B01F4018B500418
+:104A600001441021AF62000C8F4E095C01C5682320
+:104A700019A000048FBF00148F4F095CAF8F005C3A
+:104A80008FBF00148FB000100A00006227BD00180D
+:104A90008F8400648F8300508F82004CAF64004489
+:104AA000AF63005003E00008AF6200543C03800095
+:104AB000346200708C43000027BDFFF8308700FF90
+:104AC00030A900FF30C800FFAF8300308F44017869
+:104AD0000480FFFE3C028000345900708F380000D3
+:104AE000A3A700033C0708008CE700748FAC00000C
+:104AF0003C0608008CC60070030378233C0E7FFF41
+:104B000000EFC82135CDFFFF00005021018D282482
+:104B100000CA1821000847C0032F202B00A8102529
+:104B20000064C021AFA200003C010800AC39007451
+:104B30003C010800AC380070934F010AA3A00002AA
+:104B40003C0E80FFA3AF00018FAC0000312B007F33
+:104B500035CDFFFF018D4824000B5600012A40256A
+:104B6000240730002406FF803C05100027BD000804
+:104B7000AF48014CAF470154A7400158A34601522A
+:104B800003E00008AF45017827BDFFE8AFBF001480
+:104B9000AFB000108F6500743C068000309000FFBD
+:104BA00000A620250E000060AF640074936300052A
+:104BB000346200080E000062A3620005020020219A
+:104BC0008FBF00148FB000102405000524060001DB
+:104BD0000A00056E27BD001827BDFFE03C038000DA
+:104BE000AFB00010AFBF0018AFB100143462007056
+:104BF0008C470000309000FF30A800FFAF870030E6
+:104C00008F4401780480FFFE3C188000371100704B
+:104C10008E2F00003C0D08008DAD00743C0A08008A
+:104C20008D4A007001E7702301AE28210000582151
+:104C300000AE302B014B4821012638213C010800F1
+:104C4000AC250074000088213C010800AC270070EE
+:104C50001100000F000000008F6200742619FFFF92
+:104C60003208007F0002FE0233E5007F15000006D7
+:104C7000332200FF2407FF800207202624A3FFFF22
+:104C800000838025320200FF00408021241110089B
+:104C90000E000060000000008F4908183125000454
+:104CA00014A0FFFD3218007F001878C00018714072
+:104CB00001CF682125AC0088AF4C0818274A09802D
+:104CC0008D4B0020AF4B01448D460024AF46014878
+:104CD000A35001500E000062A7400158022010218D
+:104CE0008FBF00188FB100148FB0001003E00008D0
+:104CF00027BD002027BDFFE8308400FFAFBF0010B4
+:104D00000E0005B930A500FF8F8300508FBF001043
+:104D1000344500402404FF903C02100027BD0018D9
+:104D2000AF43014CA3440152AF45015403E00008D6
+:104D3000AF4201789343093E306200081040000DF5
+:104D40003C0901013528080AAC8800008F4700742F
+:104D5000AC8700043C06080090C63CD030C500106B
+:104D600050A00006AC8000088F6A0060AC8A000882
+:104D70002484000C03E00008008010210A000620B3
+:104D80002484000C27BDFFE8AFBF0014AFB00010B3
+:104D90009346093F00A05021000528800085382354
+:104DA00030C200FF240300063C09080095293CC6D8
+:104DB00024E8FFD82405000410430037240600022D
+:104DC0009750093C3C0F020400063400320EFFFFEE
+:104DD00001CF6825AC8D0000934C093E318B00203B
+:104DE0001160000800000000934309363C020103F3
+:104DF000345F0300307900FF033FC025240500081D
+:104E0000AC98000493430934935909210005F882B2
+:104E1000306200FF0002C082332F00FF00186E00D6
+:104E2000000F740001AE6025018920253C09400077
+:104E300000898025ACF0FFD8934309378F4F09488C
+:104E40008F580940306200FF004AC821033F70219B
+:104E500001F86023000E6F0001A650253185FFFF89
+:104E6000001F58800145482501683821AD09002000
+:104E70000E00006024F00028240400040E000062EC
+:104E8000A364003F020010218FBF00148FB00010F8
+:104E900003E0000827BD00180A00063324060012AC
+:104EA00027BDFFD024090010AFB60028AFB50024FD
+:104EB000AFB40020AFB10014AFB000103C01080047
+:104EC000A0293CD0AFBF002CAFB3001CAFB200187C
+:104ED00097480908309500FF3C02000E3107FFFF9C
+:104EE000000731C0AF46002C974409089344010BDA
+:104EF00030B400FF03428021308300300000B02135
+:104F00001060010700008821240C00043C01080007
+:104F1000A02C3CD0934B093E000B5600000A2E03F8
+:104F200004A0014B00000000AF400048934F010B6C
+:104F300031EE002011C00006000000009358093E29
+:104F400000189E00001396030640016B000000004D
+:104F50009344010B30830040106000038F93005096
+:104F60008F8200502453FFFF9347093E30E600082C
+:104F700014C0000224120003000090219619002C96
+:104F800093580934934F0937A7990058330C00FF01
+:104F900031EE00FF024E6821000D5880016C502157
+:104FA000015140213C010800A4283CC6920500188C
+:104FB00030A900FF010918213C010800A4233CC8C6
+:104FC00092110018162000032467000A0000000D4B
+:104FD0002467000A30F0FFFF3C010800A4233CCA0C
+:104FE0003C010800A4203CC03C010800A4203CBCBB
+:104FF0000E00009E020020210E00049A0040202195
+:105000008F4B002C974A09083C0C000E034C3821AA
+:105010003145FFFF000549C0AF49002C97430908FF
+:1050200094F1001A00404021241F00013226FFFFA6
+:10503000AC4600008CE2001CAD0200048CE40020B1
+:10504000AD04000890E3001930630003107F00D620
+:10505000286D000215A0011C240E0002106E010E26
+:10506000240F0003106F00E3000000003C0908005B
+:1050700095293CC0934E0934935109213C0A0800FC
+:10508000954A3CC631CD00FF94F9002A000D1882E4
+:1050900097870058322C00FF00032E00000C2400DC
+:1050A0003126FFFF3142FFFF00A4F82500464821CA
+:1050B00003E97825032770213C18400001F8682592
+:1050C000000E8C00AD0D0000AD110004934C0920C2
+:1050D0003C03000625110014000C2E0000A310252F
+:1050E000AD0200088F49092C24E40001309F7FFFA6
+:1050F000AD09000C8F46093025090028A79F0058EC
+:10510000AD0600108F59093801203021AD19001467
+:10511000AE3300048F580940AE380008934F09376A
+:105120003C0C0800918C3CD0AE20001031EE00FF0A
+:1051300001D26821000D2F00000C1C0000A31025D7
+:105140003447FFFFAE27000CAF4B002C934B093EBA
+:10515000317300081260000D3C0F010135E7080AA9
+:10516000AD0700288F4B0074AD2B00043C130800E2
+:1051700092733CD03268001051000003AD2000084B
+:105180008F780060AD3800082526000C12C000386A
+:1051900000000000935F093F241600062407000466
+:1051A00033F900FF133600D2240800029743093C6C
+:1051B0003C0C02043064FFFF008C2825ACC50000C5
+:1051C0009342093E304900201120000800000000F1
+:1051D000934B09363C130103366E0300316D00FF1B
+:1051E00001AE8825ACD10004240700089349093496
+:1051F00093590921314BFFFF313F00FF001FB0825F
+:10520000333800FF0016560000187C00014F982527
+:1052100000122880026B68253C0E400000C5502318
+:1052200001AE8825AD51FFD8934309378F5F0948F8
+:105230008F490940306C00FF019210210007208245
+:105240000044C82103E978230019C7000008B4000E
+:105250000316402531E7FFFF010730250E000060EF
+:10526000AD46FFF8241200040E000062A372003F56
+:105270000E0000C7020020213C12080092523CD0D0
+:10528000325000031200000F02A020218F82005034
+:1052900024470001AF870050AF6700508F6800546B
+:1052A0000107302318C0000200E020218F64005461
+:1052B000AF6400548F4C0074258401F4AF64000C7B
+:1052C00002A0202102802821A76000680E0005B9F5
+:1052D0003C1410008F8D005034550006AF4D014C2A
+:1052E0008F9100488FBF002C8FB600282623000125
+:1052F000AF8300488FB3001CA35101528FB2001836
+:10530000AF5501548FB10014AF5401788FB500240C
+:105310008FB400208FB0001003E0000827BD0030DC
+:105320009358093E00189E00001396030642005150
+:105330002411000293440923308300021060FEFB15
+:105340008F8600608F82005014C2FEF800000000BB
+:105350000E000060000000009369003F2407001663
+:10536000312800FF1107000C240500083C0C080040
+:10537000918C3CD0358B00013C010800A02B3CD027
+:10538000936A003F314300FF10650065240D000A59
+:10539000106D005E2402000C0E0000620000000090
+:1053A0000A00068E000000003C09080095293CC058
+:1053B0003C04080094843CCA3C1F080097FF3CBC96
+:1053C00094F800243123FFFF0083C821033F782392
+:1053D00000186C0025EEFFF201AE6025240A0800DB
+:1053E000AD0C000CAD0A0014AD0000100A0006E080
+:1053F000250800183C09080095293CC03C1F0800FE
+:1054000097FF3CCA3C19080097393CBC94EF002434
+:105410003124FFFF94EE002803E4C0210319682320
+:10542000000F2C00000E540025ACFFEE014C882527
+:1054300034A2810024060800AD02000CAD1100105A
+:10544000AD060018AD0000140A0006E02508001C97
+:105450008F6E00848F4D094011A0FEB3AF8E0050B7
+:10546000240F00143C010800A02F3CD00A00068D38
+:10547000000000003C010800A0313CD0935F093ED1
+:105480002416000133F900201720FEA8241100087B
+:105490000A00068E2411000494E5002494F10028EB
+:1054A0003C09080095293CC0000514000011340097
+:1054B0003444810034C30800AD04000CAD03001077
+:1054C0000A0006E0250800141460FEE80000000051
+:1054D00094FF00243C09080095293CC0001FCC0023
+:1054E00037380800AD18000C0A0006E02508001047
+:1054F0000A00072E240800128F7F004CAF7F005453
+:105500008F7900540A000697AF790050A362003FDC
+:105510000E000062000000000A00068E000000007D
+:10552000240200140A000807A362003F27BDFFE819
+:10553000308400FFAFBF00100E0005B930A500FF9A
+:105540009378007E9379007F936E00809368007A51
+:10555000332F00FF00186600000F6C0031CB00FFF6
+:10556000018D4825000B52008FBF0010012A3825FD
+:10557000310600FF3444700000E628252402FF8134
+:105580003C03100027BD0018AF45014CAF44015447
+:10559000A342015203E00008AF43017827BDFFD8C2
+:1055A000AFB20018AFB10014AFB00010AFBF002011
+:1055B000AFB3001C93420109308600FF30B000FFFA
+:1055C000000618C232040002307100011480000588
+:1055D000305200FF9367000530E5000810A0000D71
+:1055E00030C80010024020210E0005A5022028210D
+:1055F000240400018FBF00208FB3001C8FB200185D
+:105600008FB100148FB000100080102103E000085B
+:1056100027BD002815000032000000009343010957
+:10562000000028213062007F000220C00002F94003
+:1056300003E4982126790088033B98218E78002482
+:105640008E6F0008130F0046000000008F64008476
+:10565000241800020004FD8233F900031338007C93
+:105660000000000093660083934A0109514600043C
+:105670003205007C10A00060000000003205007CB4
+:1056800014A000530240202116200006320400011D
+:105690008E7F00248F59010417F9FFD600002021C6
+:1056A000320400011080000A024020218F4209408C
+:1056B0008F93006410530006000000000E00066B7C
+:1056C000022028218F430940AF630044024020217B
+:1056D0000E000600022028210A00084024040001D0
+:1056E0003C0908008D290064252600013C010800C2
+:1056F000AC26006416000012000000008F6D0084CC
+:105700003C0E00C001AE602415800005024020213F
+:105710000E00080E022028210A000840240400017F
+:10572000240500040E00056E24060001024020211D
+:105730000E00080E022028210A000840240400015F
+:105740000E00004124040001936B007D020B5025E4
+:105750000E000062A36A007D0A0008838F6D00843A
+:105760008F6600748F4801048E67002400064E0285
+:105770001507FFB63126007F936B00832644000196
+:10578000308A007F11460043316300FF5464FFB04C
+:105790008F6400842645000130B1007F30A200FFF5
+:1057A0001226000424050001004090210A0008563A
+:1057B00024110001240FFF80024F702401CF902696
+:1057C000324200FF004090210A00085624110001D7
+:1057D0000E00066B02202821321800301300FFAAA9
+:1057E00032100082024020210E0005A5022028214F
+:1057F0000A000840240400018F6E00743C0F8000F2
+:105800002405000301CF9025AF72007493710083CB
+:10581000240600010E00056E322400FF0E00004138
+:1058200024040001936D007D020D60250E000062CE
+:10583000A36C007D3C0B08008D6B005425700001AB
+:105840003C010800AC3000540A0008402404000168
+:105850008F6800743C098000240500040109382584
+:10586000AF67007493630083240600010E00056E89
+:10587000306400FF0E000041240400019362007DAB
+:10588000020298250E000062A373007D0A00084002
+:1058900024040001324D008039AC0080546CFF6C50
+:1058A0008F6400840A0008A92645000127BDFFC8AF
+:1058B0003C0A0008AFBF0030AFB5002CAFB40028E1
+:1058C000AFB30024AFB20020AFB1001CAFB00018DE
+:1058D000034AD82124090040AF490814AF400810FA
+:1058E0008F4209448F4309508F4609548F47095C02
+:1058F0008F48094C934401089345010BAF82006423
+:10590000308400FF30A500FFAF830050AF86004C0D
+:10591000AF87005C0E00082AAF8800601440017455
+:105920008FBF0030A7600068934D0900240B005022
+:105930003C15080026B53C8831AC00FF3C1208003D
+:1059400026523C98118B0003000000000000A821A3
+:1059500000009021935101098F9F005024040010F2
+:10596000322E007F000E68C0000E6140018D28219C
+:1059700024B40088AF5408188F4901048F4A09A441
+:105980003C0B000E034BC021012A10233C010800F0
+:10599000AC223CAC8F4309583C010800A0243CD009
+:1059A00097470908007F30233C010800AC263CB033
+:1059B00030E8FFFF0008C9C03C010800AC3F3CD400
+:1059C000AF59002C974209089710002C8EB10000A7
+:1059D000930F001803749821A7900058AF930044C8
+:1059E0000220F80931F000FF304E000215C001A975
+:1059F000304F000111E0015D000000009343093EBB
+:105A00003066000814C00002241400030000A02126
+:105A10008F5809A4241300013C010800AC383CD87D
+:105A2000934F09349351093731EC00FF322E00FFB8
+:105A3000028E6821000D288000AC502101505821B1
+:105A40003C010800A42B3CC83C010800A42A3CC629
+:105A500093490934312200FF0202202124900010D2
+:105A60003C010800A4303CC4240700068F9F00506E
+:105A70003C010800AC273CCC8F88005C8F5909584A
+:105A800000008021011F282304A00151033F20238F
+:105A90000480014F00A4302B10C001510000000011
+:105AA0003C010800AC253CB08E4200000040F809E3
+:105AB0000000000030430002146000F10040882123
+:105AC00030440001548000108E4200043C0908005C
+:105AD0008D293CB43C0AC000012A8025AF500E003D
+:105AE0008F45000030AB00081160FFFD0000000092
+:105AF000974D0E0824100001A78D003C8F4C0E041A
+:105B0000AF8C00348E4200040040F8090000000011
+:105B100002228825322E000215C0016F000000000D
+:105B20003C09080095293CBC3C06080094C63CC8CA
+:105B30003C04080094843CBE3C1808008F183CB418
+:105B4000012658213C0F08008DEF3CD83C1F08006F
+:105B500097FF3CD2016418218F4D09400309C821E9
+:105B6000246E0002033F282101F860213C01080057
+:105B7000A42B3CCAAF8D00643C010800AC2C3CD87F
+:105B80003C010800A4253CC00E00009E31C4FFFF6C
+:105B90008F870048004020213C010800A0273CD10D
+:105BA0008E42000824E80001AF8800480040F80950
+:105BB000000000008F4B002C974909083C0A000E9A
+:105BC000034A38213124FFFF000419C08F8A005096
+:105BD000AF43002C9743090894E6001A0040402187
+:105BE00030DFFFFFAC5F00008CF9001CAC590004F3
+:105BF0008CF80020AC58000890EF001931E3000346
+:105C0000107300FB0000000028620002144001171E
+:105C10002405000210650109240C0003106C00BC6F
+:105C2000000000003C09080095293CC0935F09343E
+:105C3000934C09213C0D080095AD3CC633F900FF9B
+:105C400094E5002A0019C082318F00FF978C00581C
+:105C500000181600000F74003124FFFF004E382595
+:105C600001A4302100E6F82500ACC8213C03400027
+:105C700003E3C02500194C00AD180000AD09000475
+:105C8000934F09203C0E000625090014000F6E00FA
+:105C900001AE2825AD0500088F46092C258200019C
+:105CA00030477FFFAD06000C8F440930A7870058AE
+:105CB00025060028AD0400108F43093800C02021BC
+:105CC000AD030014AD2A00048F5F0940AD3F00080A
+:105CD000935909373C0E080091CE3CD0AD200010FE
+:105CE000333800FF03147821000F6700000E6C00AA
+:105CF000018D282534A2FFFFAD22000CAF4B002CF4
+:105D00009347093E30EA00085140000F8E58000CBE
+:105D10003C0301013469080AAD0900288F4A007468
+:105D2000ACCA00043C0B0800916B3CD031680010F9
+:105D300051000003ACC000088F650060ACC50008CE
+:105D400024C4000C8E58000C0300F8090000000069
+:105D50003C0F080095EF3CCA3C02080094423CBE50
+:105D600001E2702125C400020E0000C73084FFFF4D
+:105D70003C0608008CC63CAC3C0D08008DAD3CB424
+:105D800000CD38233C010800AC273CAC14E00006F1
+:105D9000000000003C1908008F393CCC372C004033
+:105DA0003C010800AC2C3CCC120000858F8B0044D9
+:105DB0008F480E108F900044AE0800208F5F0E18A1
+:105DC000AE1F00243C10080096103CC00E0000607E
+:105DD0000000000024050040AF4508148F830050E8
+:105DE0008F89004C0070182100695023194000046D
+:105DF000AF830050AF6300548F670054AF87004CEF
+:105E00001200000C000000008F440074936D0081AC
+:105E1000340EFA002DA6000710C00005008E1821D0
+:105E200093780081240201F40302780401E418212C
+:105E3000AF63000C8F4C095C8F99005C01992023A3
+:105E400018800003000000008F50095CAF90005CD8
+:105E50000E000062000000008F8B00508E48001082
+:105E60003C010800AC2B3CD40100F8090000000004
+:105E70003C1F08008FFF3CAC17E0FEFC2407000627
+:105E80008F450024974209088F8A00648F94005040
+:105E90003C0F001F978700588F8300548F93004C4E
+:105EA000304DFFFF35EEFF8000AE4824000D31C0BD
+:105EB00032320010AF460024A467002CAF49002402
+:105EC000AF6A0044AF740050AF7300545640007E78
+:105ED0008EB8000432240040548000328EB1000895
+:105EE0008EAC000C0180F809000000008FBF00306C
+:105EF0008FB5002C8FB400288FB300248FB2002000
+:105F00008FB1001C8FB0001803E0000827BD0038D7
+:105F10003C09080095293CC03C04080094843CCA14
+:105F20003C1F080097FF3CBC94F800243123FFFF7E
+:105F300094EF00280083C821033F702300182C0031
+:105F4000000F640025CDFFEE018D302534A28100C5
+:105F500024030800AD02000CAD060010AD030018CC
+:105F6000AD0000140A0009CE2508001C9347010962
+:105F70008F8800380007FE0003E8C825AF5900806D
+:105F80008F5809A08F5309A4AFB80010AF580E1452
+:105F90008FB40010AF540E10AF530E1C0A0009420C
+:105FA000AF530E180220F809000000008EAC000C60
+:105FB0000180F809000000000A000A7F8FBF00304E
+:105FC000A5600020A57300220A000A34AD730024E6
+:105FD0003C010800AC203CB00A00096E8E42000073
+:105FE0003C010800AC243CB00A00096E8E4200005F
+:105FF0003C09080095293CC03C1F080097FF3CCA9B
+:106000003C19080097393CBC94EF00243124FFFF71
+:1060100003E4C02103197023000F640025CDFFF2B3
+:10602000018D2825AC45000C24020800AD020014A7
+:10603000AD0000100A0009CE2508001894E60024DF
+:1060400094E300283C09080095293CC00006240080
+:106050000003FC003499810037F80800AD19000CEA
+:10606000AD1800100A0009CE250800141460FEEDDA
+:106070000000000094EF00243C09080095293CC072
+:10608000000F740035CD0800AD0D000C0A0009CEDC
+:106090002508001093520109000028210E00060077
+:1060A000324400FF8FBF00308FB5002C8FB4002822
+:1060B0008FB300248FB200208FB1001C8FB0001866
+:1060C00003E0000827BD00380300F80900000000C5
+:1060D0000A000A79322400401200FF690000000023
+:1060E0008F540E148F920044AE5400208F530E1C18
+:1060F0000A000A63AE5300248F82001C00804021F6
+:106100003C0401009047008530E300201060000946
+:10611000000000003C0708008CE73CD48F83001887
+:1061200000E32023048000089389000414E30003A3
+:106130000100202103E00008008010213C04010040
+:1061400003E00008008010211120000B00673823B5
+:106150008F8C002024090034918B00BC316A00022E
+:10616000514000012409003000E9682B15A0FFF11F
+:106170000100202100E938232419FFFC00B9C024C4
+:1061800000F9782400F8702B15C0FFEA01E82021FF
+:1061900030C200030002182314C00012306900034B
+:1061A0000000302100A9702101C6682100ED602B9C
+:1061B0001180FFE03C0401002D2F00010006482B58
+:1061C0000105382101E9302414C0FFDA24E4FFFC82
+:1061D0002419FFFC00B9C0240308202103E00008B3
+:1061E000008010218F8B002024060004916A00BCDF
+:1061F000314400041480FFEC00A970210A000B2D2B
+:106200000000302127BDFFE8AFBF00108F4601001E
+:10621000934A01093C1F08008FFF00902407FF806C
+:10622000314F00FF31E8007F0008614003E6C821DC
+:10623000032CC02127090120012770243C010800FC
+:10624000A02F3D10AF4E080C3C0D08008DAD009006
+:106250003C0400803482000301A65821016C1821FF
+:106260002465012030AA007801424025AF48081C6F
+:106270003C1F08008FFF00908F88004003E6C0217C
+:106280003319000703074824033A7821AF4900284F
+:1062900025E909C0952E00023C0D08008DAD008C4B
+:1062A0003C0A08008D4A009031CC3FFF01A618211E
+:1062B000000C5980006B282100A72024AF44002C3B
+:1062C000952200023C1F08008FFF008C910700857B
+:1062D00030593FFF03E678210019C1800146702143
+:1062E00001F8682131CC007F31AB007F019A282171
+:1062F000017A50213C03000C3C04000E00A328212D
+:106300000144102130E6002027470980AF82002C8D
+:10631000AF88001CAF890024AF85002010C00006A4
+:10632000AF8700288D0200508CA4010C004430235C
+:1063300018C0007700000000910C0085240DFFDFDD
+:10634000018D3824A10700858F8B001C8F890024C4
+:106350008F8700288D65004CAF850018912F000DA8
+:1063600031EE002011C000170000000024090001D8
+:10637000A3890004AF80000C8CE400248F85000CFE
+:10638000240A0008AF800008AF8000103C0108001C
+:10639000A42A3CBE3C010800A4203CD20E000B0104
+:1063A000000030218F8500248FBF0010AF820014C1
+:1063B00090A8000D27BD00180008394203E000082E
+:1063C00030E20001913F00022418000133F900FF80
+:1063D0000019218210980039240800021088005BFF
+:1063E0008F86002C8CE5002414A0001B8F9F0020BA
+:1063F00091220000240A00053046003F10CA0047E1
+:10640000240400018F860008A3840004AF860010D6
+:10641000AF86000C8CE400248F85000C240A000851
+:106420003C010800A42A3CBE3C010800A4203CD248
+:106430000E000B01000000008F8500248FBF0010AC
+:10644000AF82001490A8000D27BD00180008394243
+:1064500003E0000830E200018CF800088CF9002409
+:106460008FEE00C4A38000048CE40024AF8E000CE7
+:106470008F85000C8F86000803197823240A0008F2
+:10648000AF8F00103C010800A42A3CBE3C0108006C
+:10649000A4203CD20E000B01000000008F850024D8
+:1064A0008FBF0010AF82001490A8000D27BD001808
+:1064B0000008394203E0000830E2000191230000A7
+:1064C0003062003F104400278F8500208CE40024B8
+:1064D00014800021000000008D2E00183C187FFF62
+:1064E0008F850020370FFFFF01CF1824AF830008EE
+:1064F0008F9F00088CA8008403E8C82B1720000297
+:1065000003E020218CA400840A000BBCAF840008A7
+:106510008CA3010C0A000B9AAF8300188D2C001875
+:106520008F8600083C0D7FFF8F89002035A3FFFF79
+:106530000183582424040001AF8B0010AD2000CC4F
+:10654000A38400040A000BC8AF86000C8CCA001498
+:106550000A000BBCAF8A00088CA300C80A000BFF1E
+:10656000AF8300088F84002C8CAC00648C8D0014E9
+:10657000018D582B11600004000000008CA2006403
+:106580000A000BFFAF8200088C8200140A000BFF88
+:10659000AF8200088F85000C27BDFFE0AFBF001859
+:1065A000AFB1001414A00007AFB000108F86002414
+:1065B0002402000590C400003083003F106200B642
+:1065C0008F8400208F91000800A080218F8C0028EC
+:1065D0003C0508008CA53CB08D8B000431663FFF64
+:1065E00000C5502B5540000100C02821938D0004A8
+:1065F00011A0007300B0F82B8F9800202404003401
+:10660000930F00BC31EE000251C0000124040030A1
+:1066100000A4C82B172000D10000000000A42823EC
+:1066200000B0F82B3C010800A4243CBC17E0006833
+:10663000020020213C0308008C633CAC0083102B3B
+:1066400054400001008018218F8800243C0108007C
+:10665000AC233CB4000048219104000D308300209D
+:10666000506000018F490E188F8300140123382BCE
+:1066700010E00059000000003C0408008C843CB489
+:1066800000895821006B502B114000560090602B60
+:106690000069302300C020213C010800AC263CB436
+:1066A00012000003241FFFFC1090008A3227000311
+:1066B000009FC8243C010800AC393CB43C010800F0
+:1066C000A4203CD28F84000C120400078F8300208A
+:1066D000AF910008020020218C7100CCAF90000C1B
+:1066E00026300001AC7000CC3C0208008C423CB467
+:1066F0008F8A0010240700180082202301422823DB
+:10670000AF84000C10800002AF8500102407001039
+:106710008F86001C3C010800A0273CD024070040C5
+:1067200090CC0085318B00C0116700408F8D001424
+:1067300014A0001500002021934A01098F4209741A
+:10674000314500FF0002260224A300013090007FA3
+:106750003071007F1230007A2407FF80A0C30083CD
+:106760003C0908008D293CCC8F880024240D0002B0
+:10677000352C00083C010800A02D3D113C0108000B
+:10678000AC2C3CCC24040010910E000D31C600202E
+:1067900010C0000500801821240800013C010800F9
+:1067A000AC283CB4348300018FBF00188FB10014B3
+:1067B0008FB000100060102103E0000827BD00200A
+:1067C0003C010800A4203CBC13E0FF9A02002021F9
+:1067D0000A000C5000A020213C0408008C843CB42A
+:1067E0000090602B1180FFAE000000003C0F0800FD
+:1067F00095EF3CBC01E4702101C6682B11A0000795
+:106800002C8200043C1F60008FF954043338003F91
+:106810001700FFE5240300422C8200041040FFA073
+:10682000240300420A000CAE8FBF0018152DFFC0D4
+:10683000000000008CDF00743C0380002405FF8012
+:1068400003E3C825ACD9007490D80085240E000459
+:1068500024040010330F003F01E54025A0C8008547
+:106860008F8800243C010800A02E3D112403000164
+:106870009106000D30C90020152000030000000023
+:106880003C0308008C633CB43C010800AC233CACE6
+:106890000A000CA5000000008F8700108C8800847F
+:1068A00000E8282B14A0000200E088218C910084CD
+:1068B00024090001A38900048F440E180220282116
+:1068C0000E000B0102203021022080210A000C362C
+:1068D000AF82001400071823306600033C01080053
+:1068E000A4263CD2122000058F8C0020918B00BC86
+:1068F000316A00041540001524CD00043C0F080047
+:1069000095EF3CD201E4702100AE302B50C0FF6EF9
+:106910008F84000C2C85000514A0FFA324030042E3
+:106920003098000317000002009818232483FFFC0E
+:106930003C010800AC233CB40A000C7200000000CB
+:1069400000A758240A000C9A016718263C01080089
+:10695000A42D3CD20A000D02000000003C010800FA
+:10696000AC203CB40A000CAD240300428F8300101D
+:1069700014600007000010218F8800242405000502
+:106980009106000030C400FF1085000300000000E5
+:1069900003E0000800000000910A0018314900FFE0
+:1069A000000939C214E0FFFA8F85001C3C0408007E
+:1069B00094843CBC3C0308008C633CD43C19080024
+:1069C0008F393CB43C0F080095EF3CD20064C021E5
+:1069D0008CAD00540319702101CF6021018D582323
+:1069E0001960001D00000000910E001C8F8C002C0F
+:1069F000974B0E1031CD00FF8D850004016D3023C3
+:106A00008D88000030CEFFFF000E510000AAC82183
+:106A10000000382101072021032A182B0083C02100
+:106A2000AD990004AD980000918F000A01CF682154
+:106A3000A18D000A8F88002C974B0E12A50B000821
+:106A4000950A003825490001A50900389107000D75
+:106A500034E60008A106000D03E000080000000075
+:106A600027BDFFE0938700048F8F00248FAD0014B3
+:106A70003C0E7FFF8F89000C35C8FFFFAFBF001CA5
+:106A8000AFB0001801A8182491EA000D000717C044
+:106A90003C1FBFFF006258252D2E00018F9000186B
+:106AA00037F9FFFF3C1808008F183CD43C0F080052
+:106AB00095EF3CCA01796824000E47803C07EFFF40
+:106AC0003C05F0FF01A818253149002034E2FFFF02
+:106AD00034ACFFFF0310582327A500102406000242
+:106AE00025EA00020062182400808021152000029F
+:106AF000000040218F480E1CA7AA00120560003735
+:106B00002407000030FF00FF001FCF008F8B001C08
+:106B100000793825AFA70014916F00853C08080064
+:106B200091083CD13C18DFFF31EE00C0370AFFFF6F
+:106B3000000E182B3C1F080097FF3CC400EA682495
+:106B4000A3A800110003174001A248258FB9001027
+:106B5000AFA900143C0A0800914A3CD3A7BF001615
+:106B60008FA80014032CC0243C0B01003C0F0FFF26
+:106B7000030B18253147000335EEFFFF010C682495
+:106B800000071600006EF8243C09700001A2C82519
+:106B900003E95825AFB90014AFAB00100E00007622
+:106BA000A3A000158F8C0024260200089186000DFA
+:106BB00030C40020108000068FBF001C3C05080078
+:106BC00094A53CC024B0FFFF3C010800A4303CC0A9
+:106BD0008FB0001803E0000827BD00208F98001434
+:106BE0000118502B5540FFC7240700010A000D85EE
+:106BF00030FF00FF9382000427BDFFE0AFBF001805
+:106C00001040000F008050218F880024240B0005C5
+:106C10008F890008910700008F840020010028213F
+:106C200030E3003F8F86002C106B000800003821F5
+:106C3000AFA900100E00040EAFAA0014A380000438
+:106C40008FBF001803E0000827BD00208D19001831
+:106C50003C0F08008DEF3CB48F9800103C027FFF82
+:106C60008D080014345FFFFF033F682401F8702192
+:106C700001AE602301883821AFA900100E00040E78
+:106C8000AFAA00140A000DD3A38000048F8700244C
+:106C90003C05080094A53CD23C0208008C423CCC48
+:106CA00090E6000D0005240030C300201060002C89
+:106CB000004440258F85001C00006021240B00014A
+:106CC00090A3008500004821240A00013C0F8000A9
+:106CD00035EE00708DC70000AF8700308F58017807
+:106CE0000700FFFE3C038000347900708F380000FD
+:106CF0003C0508008CA500743C0D08008DAD0070AB
+:106D00000307782300AF38210000102100EF302B5B
+:106D100001A22021008618213C010800AC27007444
+:106D20003C010800AC230070AF4B01483C1908003F
+:106D30008F393CD4A7490144A74A0146AF59014CB9
+:106D40003C0B0800916B3CD1A34B0152AF4801545E
+:106D50003C081000A74C015803E00008AF48017838
+:106D60008F4B0E1C3C0A08008D4A3CB497490E1606
+:106D7000974D0E1401456021312AFFFF0A000DF6E0
+:106D800031A9FFFF8F8300249064000D3082002022
+:106D900010400029000000000000482100005021A0
+:106DA000000040213C07800034EB00708D6700003C
+:106DB000AF8700308F4C01780580FFFE3C0D8000CE
+:106DC00035AC00708D8B00003C0508008CA500746C
+:106DD0003C0408008C8400700167302300A67821F1
+:106DE0000000102101E6C82B0082C0210319702188
+:106DF0003C010800AC2F00743C010800AC2E007070
+:106E0000AF4901483C0D08008DAD3CD4A748014472
+:106E100024090040A74A01463C081000240AFF91BB
+:106E2000AF4D014CA34A0152AF490154A74001584C
+:106E300003E00008AF4801788F490E1897460E12FC
+:106E400097450E1030CAFFFF0A000E2C30A8FFFF36
+:106E50008F83002427BDFFF89064000D308200204E
+:106E60001040003A00000000240B000100004821FF
+:106E7000240A00013C088000350700708CE3000004
+:106E8000AF8300308F4C01780580FFFE3C0E800000
+:106E90003C04080090843D1035C700708CEC000065
+:106EA0003C0508008CA50074A3A400033C1908004D
+:106EB0008F3900708FAD00000183302300A6382188
+:106EC000000010210322782100E6C02B01F8602188
+:106ED00001AE4025AFA800003C010800AC270074BB
+:106EE0003C010800AC2C00709346010A3C040800E9
+:106EF00090843D11A3A00002A3A600018FA300006F
+:106F00003C0580FF3099007F34A2FFFF00627824A7
+:106F10000019C60001F87025240D3000AF4E014C59
+:106F200027BD0008AF4D0154A7400158AF4B0148A1
+:106F3000A7490144A74A01463C091000240AFF80E2
+:106F4000A34A015203E00008AF4901788F4B0E18A5
+:106F500097460E1297450E1030CAFFFF0A000E60CA
+:106F600030A9FFFF8F85001C2402008090A40085BB
+:106F7000308300C0106200058F8600208F880008D3
+:106F80008F87000CACC800C8ACC700C403E0000881
+:106F9000000000003C0A0800254A38903C0908001F
+:106FA0002529395C3C08080025082D103C070800FD
+:106FB00024E73A703C06080024C637003C05080068
+:106FC00024A534783C040800248430A03C03080045
+:106FD000246337983C0208002442356C3C010800C9
+:106FE000AC2A3C903C010800AC293C8C3C010800D8
+:106FF000AC283C883C010800AC273C943C010800CC
+:10700000AC263CA43C010800AC253C9C3C0108009B
+:10701000AC243C983C010800AC233CA83C0108008F
+:0C702000AC223CA003E0000800000000CF
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex
deleted file mode 100644
index 92e220473c71..000000000000
--- a/firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex
+++ /dev/null
@@ -1,6051 +0,0 @@
-:100000000800011008000000000051C4000000C8F2
-:10001000000000000000000000000000080051C4C3
-:10002000000000380000528C080000880800000022
-:10003000000051B4000052C4080053A00000008426
-:100040000000A478080051B4000001C00000A4FC26
-:10005000080031D808000000000080E40000A6BCC1
-:10006000000000000000000000000000080080E424
-:1000700000000124000127A00800048808000400F3
-:10008000000017EC000128C4000000000000000080
-:100090000000000008001BEC00000004000140B05C
-:1000A000080000A80800000000003814000140B457
-:1000B00000000000000000000000000008003814EC
-:0800C00000000030000178C8C7
-:0800C8000A00004400000000E2
-:1000D000000000000000000D636F6D352E302E30E3
-:1000E0006A33000005000002000000000000000369
-:1000F00000000014000000320000000300000000B7
-:1001000000000000000000000000000000000000EF
-:1001100000000010000001360000EA600000000549
-:1001200000000000000000000000000000000008C7
-:1001300000000000000000000000000000000000BF
-:1001400000000000000000000000000000000000AF
-:10015000000000000000000000000000000000009F
-:10016000000000020000000000000000000000008D
-:10017000000000000000000000000000000000007F
-:10018000000000000000000000000010000000005F
-:10019000000000000000000000000000000000005F
-:1001A000000000000000000000000000000000004F
-:1001B000000000000000000000000000000000003F
-:1001C000000000000000000000000000000000002F
-:1001D000000000000000000000000000100000030C
-:1001E000000000000000000D0000000D3C020800AF
-:1001F000244252203C03080024635354AC400000C6
-:100200000043202B1480FFFD244200043C1D080005
-:1002100037BD9FFC03A0F0213C1008002610011000
-:100220003C1C0800279C52200E00025F00000000CA
-:100230000000000D27BDFFE0AFBF0018AFB10014F4
-:10024000AFB000103C04800094820108304370007D
-:10025000240220001062000B2862200114400036A6
-:1002600000001021240240001062002C0000000059
-:10027000240260001062002D000010210A00009D81
-:100280008FBF001834910100922400098E300018AD
-:1002900010800020240300012402000914820006BB
-:1002A0008F82001C3C0280089442001A0002140055
-:1002B000020280258F82001C8C42000C1040001529
-:1002C000000018210E000D45000000008F83001C67
-:1002D000962400088F8200189463001E9625000C57
-:1002E0000004240000832025AC500000AC4500042D
-:1002F000AC400008AC40000CAC400010AC40001416
-:10030000AC400018AC44001C0E000D792404000120
-:10031000000018210A00009C006010210E00042E2D
-:10032000000000000A00009C000010210E000C6577
-:1003300000000000000010218FBF00188FB10014D2
-:100340008FB0001003E0000827BD00208F82001C42
-:1003500027BDFFE0AFB00010AFBF0018AFB1001471
-:100360008C42000C3C1080008E11010010400034C3
-:100370008FBF00180E000D45000000008F8500188B
-:1003800024047FFF0091202BACB100008E030104F8
-:100390009602010800031C003042FFFF006218258E
-:1003A000ACA300049202010A96030114304200FF3C
-:1003B0003063FFFF0002140000431025ACA20008C8
-:1003C0009603010C9602010E00031C003042FFFF51
-:1003D00000621825ACA3000C9603011096020112CE
-:1003E00000031C003042FFFF00621825ACA3001080
-:1003F0008E020118ACA200148E02011CACA20018DF
-:10040000148000088F82001C978200003C042005A5
-:100410000044182524420001ACA3001C0A0000DBA4
-:10042000A78200003C0340189442001E00431025A0
-:10043000ACA2001C0E000D79240400018FBF00182F
-:100440008FB100148FB000100000102103E00008ED
-:1004500027BD00203C0680008CC202B824030001A6
-:1004600004410008008028213C0208008C42006002
-:10047000244200013C010800AC22006003E00008B7
-:10048000006010218C83002094820016ACC302808F
-:100490002442FFFCA4C202843C0208008C42005C9F
-:1004A0008C84000494A3000E244200013C01080047
-:1004B000AC22005C3C021000A4C30286ACC40288DB
-:1004C00000001821ACC202B803E00008006010214F
-:1004D00027BDFFE0AFB000103C108000AFB20018A5
-:1004E000AFBF001CAFB10014361201009243000BE5
-:1004F0002402001A965100081462005A00002821B4
-:1005000032220001104000188F82001C8E42000031
-:10051000000223403C02003F3442FFFF0044102B06
-:10052000104000043C030040964200140A000124DD
-:10053000008320218E030100240201005462000682
-:10054000964200143C028008904200043042000FA2
-:10055000000225009642001400821025AE020080A1
-:100560000A000157000000008C42000C10400028D7
-:10057000000000000E000D4500000000960201087A
-:100580009603010C8F8500183042003E3063FFFF58
-:100590000002140000431025ACA200008E020100EE
-:1005A000ACA20004960301169604010E8F82001C73
-:1005B00000031C003084FFFF00641825ACA3000872
-:1005C00096030110960401129446001E00031C00BD
-:1005D0003084FFFF00641825ACA3000C3C0220000F
-:1005E00000C2302596020114240400013042FFFFAE
-:1005F000ACA200108E020118ACA200149202010BF2
-:10060000304200FFACA200180E000D79ACA6001C11
-:100610003C0208008C420040244200013C010800DA
-:10062000AC2200403C0308008C63004432220002EC
-:1006300032240004246300013C010800AC23004480
-:10064000108000080002282B024020218FBF001CD0
-:100650008FB200188FB100148FB000100A0000E3B1
-:1006600027BD00208FBF001C8FB200188FB100146F
-:100670008FB0001000A0102103E0000827BD00206B
-:1006800027BDFFE0AFB000103C108000AFB20018F3
-:10069000AFBF001CAFB10014361201009243000B33
-:1006A000240200031462006A9651000832220001FD
-:1006B000104000178F82001C8E4300003C02003F58
-:1006C0003442FFFF000323400044102B504000053C
-:1006D00024020100964200143C0300400A00018EEF
-:1006E0000083202154620006964200143C028008D8
-:1006F000904200043042000F000225009642001490
-:1007000000821025AE0200800A0001BE0000000039
-:100710008C42000C10400025000000000E000D452A
-:1007200000000000960201089603010C8F85001856
-:100730003042003E3063FFFF0002140000431025EA
-:10074000ACA200008E020100ACA2000496030116C8
-:100750009604010E8F82001C00031C003084FFFFF2
-:1007600000641825ACA3000896030110960401123A
-:100770009446001E00031C003084FFFF006418250F
-:10078000ACA3000C3C02200000C2302596020114EC
-:10079000240400013042FFFFACA20010ACA0001402
-:1007A000ACA000180E000D79ACA6001C3C0208009D
-:1007B0008C420040244200013C010800AC22004071
-:1007C0003C0208008C420044322300042442000111
-:1007D0003C010800AC2200441060000832220002F4
-:1007E000024020218FBF001C8FB200188FB100146F
-:1007F0008FB000100A0000E327BD00201040001554
-:100800008FBF001C3C0480008C8301043C026020EC
-:10081000AC4300148C420004240301FE304203FF69
-:100820001443000C8FBF001C8C820100000219C20F
-:100830002462FFFC2C420008104000032404000244
-:100840002462FFFD004420043C026000AC446914B3
-:100850008FBF001C8FB200188FB100148FB0001032
-:100860000000102103E0000827BD00203C048000A8
-:100870008C83010024020100506200033C028008C6
-:100880000000000D3C02800890430004000010218D
-:100890003063000F00031D0003E00008AC830080FC
-:1008A0002C8407811080000A000028213C0280006F
-:1008B00094420108240320003042700014430005D4
-:1008C0002783FFB03C02800890420005304500FFBE
-:1008D0002783FFB00005208000832021000510C081
-:1008E000004510238C8400003C030800246352E47C
-:1008F000000210C0004310213C038000AC64009053
-:1009000003E00008AF82001C03E000080000102193
-:1009100003E00008000010212402010014820008F6
-:10092000000000003C0208008C4200FC2442000150
-:100930003C010800AC2200FC0A00022430A2002086
-:100940003C0208008C420084244200013C01080063
-:10095000AC22008430A200201040000830A3001018
-:100960003C0208008C420108244200013C010800BE
-:10097000AC22010803E0000800000000106000083D
-:10098000000000003C0208008C42010424420001E7
-:100990003C010800AC22010403E000080000000054
-:1009A0003C0208008C420100244200013C01080086
-:1009B000AC22010003E000080000000027BDFFE8B2
-:1009C000AFB000103C108000AFBF0014360401002F
-:1009D0009483000830620004104000053066000275
-:1009E0008FBF00148FB000100A0000E327BD00186D
-:1009F00010C00006006028218E0401000E000214C1
-:100A0000000000000A00025B240200018F8200083F
-:100A10008E03010410430007000010218E04010022
-:100A20000E000214000000008E020104AF820008D4
-:100A3000000010218FBF00148FB0001003E00008E9
-:100A400027BD001827BDFFD83C036010AFB3001CC2
-:100A5000AFBF0020AFB20018AFB10014AFB00010AC
-:100A60008C6450002402FF7F3C1308002673524818
-:100A7000008220243484380CAC6450003C02800096
-:100A800024030037AC4300083C06080024C6084095
-:100A9000026010212404001C2484FFFFAC460000E7
-:100AA0000481FFFD244200043C0208002442016C42
-:100AB0003C010800AC2252503C020800244205B818
-:100AC0003C010800AC2252543C020800244202843B
-:100AD0003C010800AC2252903C0208002442040869
-:100AE0003C030800246308483C040800248408F4FC
-:100AF0003C05080024A52C4C3C010800AC2252B057
-:100B00003C020800244207A43C010800AC2652988D
-:100B10003C010800AC2552A43C010800AC2352ACB7
-:100B20003C010800AC2452B43C010800AC2252B88D
-:100B30003C010800AC23524C3C010800AC20525848
-:100B40003C010800AC20525C3C010800AC20526023
-:100B50003C010800AC2052643C010800AC20526803
-:100B60003C010800AC20526C3C010800AC205270E3
-:100B70003C010800AC2452743C010800AC205278BF
-:100B80003C010800AC20527C3C010800AC205280A3
-:100B90003C010800AC2052843C010800AC20528883
-:100BA0003C010800AC26528C3C010800AC26529453
-:100BB0003C010800AC20529C3C010800AC2552A02E
-:100BC0003C010800AC2352A80E00055A00000000AA
-:100BD0008F8300043C0208008C4200201062001F3A
-:100BE000000088212792FFB03C100800261052E434
-:100BF0003C0208008C420020240500010225180454
-:100C0000004320248F820004004310245044000C31
-:100C10002631000110800008AF90001C8E430000B8
-:100C20003C028000AC4300900E000D0CAE05000CA1
-:100C30000A0002DE26310001AE00000C2631000160
-:100C40002E220002261000381440FFE9265200042C
-:100C50003C0208008C420020AF8200043C1080005F
-:100C60008E110000322200071040FFDA8F8300044B
-:100C70003222000110400021322200028E020100C7
-:100C8000AE0200208E020104AE0200A80E0001F6A2
-:100C90008E0401009202010B304300FF2C62001D04
-:100CA00054400004000310800E0002100A0002FFEE
-:100CB00000000000005310218C4200000040F809A1
-:100CC00000000000104000043C0280008C4301043E
-:100CD0003C026020AC4300143C0208008C4200340B
-:100CE0003C0440003C03800024420001AC64013815
-:100CF0003C010800AC2200343222000210400010F7
-:100D0000322200043C1080008E020140AE0200201E
-:100D10000E0001F68E0401400E0003970000000053
-:100D20003C024000AE0201783C0208008C420038D0
-:100D3000244200013C010800AC22003832220004A9
-:100D40001040FFA48F8300043C1080008E020180BD
-:100D5000AE0200200E0001F68E0401808E03018099
-:100D600024020F00146200073C0280088E020188F2
-:100D70003C0300E03042FFFF004310250A00033B24
-:100D8000AE020080344200809042000024030050F4
-:100D9000304200FF14430007000000000E000374FF
-:100DA0000000000014400003000000000E00095D78
-:100DB000000000003C0208008C42003C3C04400063
-:100DC0003C03800024420001AC6401B83C010800EF
-:100DD000AC22003C0A0002C38F8300043C02900056
-:100DE00034420001008220253C028000AC440020F7
-:100DF0003C0380008C6200200440FFFE00000000E5
-:100E000003E00008000000003C02800034430001C1
-:100E10000083202503E00008AC44002027BDFFE04C
-:100E2000AFB10014AFB0001000808821AFBF001830
-:100E30000E00034530B000FF8F83FFA80220202161
-:100E40009062002502028025A07000258C70001899
-:100E50003C0280000E000350020280241600000AAB
-:100E60008FBF00183C0380008C6201F80440FFFE35
-:100E700024020002AC7101C0A06201C43C02100057
-:100E8000AC6201F88FBF00188FB100148FB0001052
-:100E900003E0000827BD002027BDFFE8AFBF00101A
-:100EA0003C0380009462018430420200104000053F
-:100EB000000020210E000FCD000000000A00038A70
-:100EC000240400018C6201880440000A8FBF0010D6
-:100ED0008C6201883C03FF00004310243C030400A3
-:100EE00014430004240400018F82FFA890420008EC
-:100EF0008FBF00100080102103E0000827BD0018FC
-:100F00008F82FFAC2403000124050001A040001AD9
-:100F10008F82FFA8A44300163C0280000A000355FC
-:100F20008C4401408F85FFA827BDFFE0AFBF001CA8
-:100F3000AFB20018AFB10014AFB0001090A2000023
-:100F4000304400FF38830020388200300003182B23
-:100F50000002102B00621824106000053C02800083
-:100F600024020050148200818FBF001C3C028000CC
-:100F700090420148304200FF2443FFFF2C620005ED
-:100F80001040007A8FBF001C000310803C03080053
-:100F9000246351DC004310218C4200000040000813
-:100FA000000000003C1180008E2401400E0003452B
-:100FB0008F92FFA88E50000C8E2201441602000270
-:100FC00024020001AE42000C0E0003508E240140AA
-:100FD0008E220144145000068FBF001C8FB20018EF
-:100FE0008FB100148FB000100A000F3927BD002008
-:100FF0008E42000C0A0004220000000094A200109F
-:101000003C0480008C8301443042FFFF14620009DD
-:101010000000000024020001A4A200108C82014004
-:10102000AC8202003C021000AC8202380A000429A3
-:101030008FBF001C94A200100A00042200000000D0
-:10104000240200201482000E3C11800094A20012A1
-:101050003C0380008C6301443042FFFF14620005B2
-:101060000000000024020001A4A200120A0003FCF8
-:101070008FBF001C94A200120A000422000000008E
-:101080008E2401400E0003458F92FFA89642001265
-:101090008E2301443050FFFF16030002240200019A
-:1010A000A64200120E0003508E2401408E220144FD
-:1010B000160200068FBF001C8FB200188FB10014FB
-:1010C0008FB000100A00038E27BD00209642001248
-:1010D0000A0004220000000094A200143C038000D7
-:1010E0008C6301443042FFFF146200088FBF001C74
-:1010F000240200018FB200188FB100148FB00010CD
-:10110000A4A200140A00142427BD002094A20014F5
-:101110000A0004220000000094A200163C03800094
-:101120008C6301443042FFFF146200082402000176
-:101130008FBF001C8FB200188FB100148FB0001049
-:10114000A4A200160A000B0027BD002094A20016DE
-:10115000144000068FBF001C3C0208008C42007047
-:10116000244200013C010800AC2200708FB200183C
-:101170008FB100148FB0001003E0000827BD0020DD
-:1011800027BDFFD8AFB200188F92FFA8AFB10014EF
-:10119000AFBF0020AFB3001CAFB000103C02800016
-:1011A000345101008C50010092420000922300094A
-:1011B000304400FF2402001F106200AB28620020B0
-:1011C00010400019240200382862000A1040000D67
-:1011D0002402000B286200081040002E8F82001CA1
-:1011E00004600103286200021440002A8F82001C60
-:1011F00024020006106200268FBF00200A00054C62
-:101200008FB3001C106200602862000B144000F9CC
-:101210008FBF00202402000E106200788F82001C15
-:101220000A00054C8FB3001C106200D128620039FF
-:101230001040000A2402008024020036106200E4FC
-:1012400028620037104000C224020035106200D826
-:101250008FBF00200A00054C8FB3001C1062002DC8
-:101260002862008110400006240200C824020039D0
-:10127000106200C88FBF00200A00054C8FB3001C0D
-:10128000106200A28FBF00200A00054C8FB3001C23
-:101290008F82001C8C42000C104000D68FBF0020B3
-:1012A0000E000D45000000003C0380003463010087
-:1012B0008C6200008F850018946700089466000C0B
-:1012C000ACA200008C6400048F82001C0006340075
-:1012D000ACA400049448001E8C62001800073C0077
-:1012E00000E83825ACA200088C62001C2404000130
-:1012F000ACA2000C9062000A00C23025ACA600101F
-:10130000ACA00014ACA00018ACA7001C0A00050B90
-:101310008FBF00208F82001C8C42000C104000B553
-:101320008FBF00200E000D45000000008F82001CC2
-:10133000962400089625000C9443001E0004220207
-:101340009626000E8F8200180004260000832025B8
-:1013500000052C003C03008000A6282500832025E2
-:10136000AC400000AC400004AC400008AC40000CB5
-:10137000AC450010AC400014AC400018AC44001C5C
-:101380000A00050A240400019622000C14400018EB
-:10139000000000009242000530420010144000148A
-:1013A000000000000E0003450200202192420005CB
-:1013B00002002021344200100E000350A24200051A
-:1013C0009242000024030020304200FF10430088B6
-:1013D000020020218FBF00208FB3001C8FB20018A5
-:1013E0008FB100148FB000100A00103627BD0028FE
-:1013F0000000000D0A00054B8FBF00208C42000C3E
-:101400001040007C8FBF00200E000D450000000042
-:101410008E2200048F8400189623000CAC820000FA
-:101420003C0280089445002C8F82001C00031C00A5
-:1014300030A5FFFF9446001E3C02400E00651825B3
-:1014400000C23025AC830004AC800008AC80000CE6
-:10145000AC800010AC800014AC800018AC86001C7E
-:101460000A00050A240400010E00034502002021A1
-:101470008F93FFAC020020210E000350A660000CE9
-:10148000020020210E000355240500018F82001C5C
-:101490008C42000C104000578FBF00200E000D45FD
-:1014A000000000009622000C8F8300180002140038
-:1014B000AC700000AC620004AC6000088E440038E0
-:1014C0008F82001CAC64000C8E46003C9445001ECC
-:1014D0003C02401FAC66001000A228258E6200046A
-:1014E00024040001AC620014AC600018AC65001C60
-:1014F0008FBF00208FB3001C8FB200188FB1001473
-:101500008FB000100A000D7927BD002824020020AA
-:10151000108200398FB3001C0E000F1F0000000066
-:10152000104000348FBF00203C0380008C6201F823
-:101530000440FFFE24020002AC7001C0A06201C49E
-:101540003C021000AC6201F80A00054B8FBF00207E
-:10155000020020218FBF00208FB3001C8FB2001823
-:101560008FB100148FB000100A000E6827BD00284C
-:101570009625000C020020218FBF00208FB3001C95
-:101580008FB200188FB100148FB000100A000E8DBA
-:1015900027BD0028020020218FB3001C8FB2001845
-:1015A0008FB100148FB000100A000EB827BD0028BC
-:1015B0009225000D020020218FB3001C8FB200186D
-:1015C0008FB100148FB000100A000F0927BD00284A
-:1015D000020020218FBF00208FB3001C8FB20018A3
-:1015E0008FB100148FB000100A000EE027BD002854
-:1015F0008FBF00208FB3001C8FB200188FB1001472
-:101600008FB0001003E0000827BD00283C038000D5
-:101610008C6202780440FFFE24020002AC640240A7
-:10162000A06202443C02100003E00008AC620278B1
-:10163000A380001003E00008A38000113C03800099
-:101640008C6202780440FFFE8F820014AC6202407C
-:1016500024020002A06202443C02100003E00008E1
-:10166000AC6202783C02600003E000088C42540443
-:101670009083003024020005008040213063003F49
-:101680000000482114620005000050219082004CA7
-:101690009483004E304900FF306AFFFFAD00000C1C
-:1016A000AD000010AD000024950200148D05001C53
-:1016B0008D0400183042FFFF004910230002110082
-:1016C000000237C3004038210086202300A2102BDF
-:1016D0000082202300A72823AD05001CAD040018BC
-:1016E000A5090014A5090020A50A001603E00008BA
-:1016F000A50A002203E000080000000027BDFFD873
-:10170000AFB200183C128008AFB40020AFB3001C89
-:10171000AFB10014AFBF0024AFB0001036510100CC
-:101720003C0260008C4254049222000C3C140800DD
-:10173000929400F7304300FF24020001106200324F
-:101740000080982124020002146200353650008087
-:101750000E0013FE000000009202004C2403FF80E4
-:101760003C0480003042007F000211C0244202404D
-:101770000262102100431824AC83009492450008B3
-:101780009204004C3042007F3C0380061485000721
-:10179000004380212402FFFFA22200112402FFFF48
-:1017A000A62200120A0005BE2402FFFF96020020B6
-:1017B000A222001196020022A62200128E0200240C
-:1017C0003C048008AE2200143485008090A2004CB6
-:1017D00034830100A06200108CA2003CAC620018AF
-:1017E0008C820068AC6200E48C820064AC6200E031
-:1017F0008C82006CAC6200E824020001A0A20068A8
-:101800000A0005DA3C0480080E00141700000000EE
-:1018100036420080A04000680A0005DA3C048008D7
-:10182000A2000068A20000690A0006153C028008B8
-:10183000348300808C62003834850100AC62006C17
-:1018400024020001A062006990A200C590830008F4
-:10185000305100FF3072007F12320019001111C0A8
-:1018600024420240026210212403FF800043182416
-:101870003C048000AC8300943042007F3C0380062F
-:10188000004380218E02000C1040000D0200202138
-:101890000E00056A0000000026220001305100FF02
-:1018A0009203003C023410260002102B0002102389
-:1018B0003063007F022288240A0005E4A203003C72
-:1018C0003C088008350401008C8200D03507008078
-:1018D000ACE2003C8C8200D0AD02000090E5004CF0
-:1018E000908600C590E3004C908400C52402FF80E0
-:1018F00000A228243063007F308400FF00A6282542
-:101900000064182A1060000230A500FF38A500808E
-:10191000A0E5004CA10500093C0280089043000EA0
-:10192000344400803C058000A043000A8C830018EA
-:101930003C027FFF3442FFFF00621824AC83001892
-:101940008CA201F80440FFFE00000000ACB301C00F
-:101950008FBF00248FB400208FB3001C8FB20018FB
-:101960008FB100148FB0001024020002A0A201C4A5
-:1019700027BD00283C02100003E00008ACA201F8DB
-:1019800090A2000024420001A0A200003C03080035
-:101990008C6300F4304200FF1443000200803021C9
-:1019A000A0A0000090A200008F840014000211C0CB
-:1019B0002442024024830040008220212402FF8030
-:1019C000008220243063007F3C02800A00621821DC
-:1019D0003C028000AC44002403E00008ACC30000DB
-:1019E00094820006908300058C85000C8C86001084
-:1019F0008C8700188C88001C8C8400203C01080017
-:101A0000A42252C63C010800A02352C53C01080094
-:101A1000AC2552CC3C010800AC2652D03C01080059
-:101A2000AC2752D83C010800AC2852DC3C0108002D
-:101A3000AC2452E003E00008000000003C028008F3
-:101A4000344201008C4400343C03800034650400BF
-:101A5000AC6400388C420038AF850020AC62003C9A
-:101A60003C020005AC6200300000000000000000F5
-:101A700003E00008000000003C020006308400FF84
-:101A8000008220253C028000AC44003000000000B1
-:101A900000000000000000003C0380008C62000099
-:101AA000304200101040FFFD3462040003E00008E3
-:101AB000AF82002094C200003C080800950800CACC
-:101AC00030E7FFFF0080482101021021A4C200007E
-:101AD00094C200003042FFFF00E2102B544000018E
-:101AE000A4C7000094A200003C0308008C6300CC53
-:101AF00024420001A4A2000094A200003042FFFF93
-:101B0000144300073C0280080107102BA4A000002A
-:101B10005440000101003821A4C700003C028008A5
-:101B2000344601008CC3002894A200003C048000CD
-:101B30003042FFFE000210C000621021AC82003C67
-:101B40008C82003C00621823186000040000000032
-:101B50008CC200240A0006A6244200018CC2002484
-:101B6000AC8200383C020050344200103C0380003C
-:101B7000AC62003000000000000000000000000027
-:101B80008C620000304200201040FFFD0000000089
-:101B900094A200003C04800030420001000210C00A
-:101BA000004410218C430400AD2300008C42040447
-:101BB000AD2200043C02002003E00008AC820030AB
-:101BC00027BDFFE0AFB20018AFB10014AFB00010F6
-:101BD000AFBF001C94C2000000C080213C1208006E
-:101BE000965200C624420001A6020000960300009F
-:101BF00094E2000000E03021144300058FB1003072
-:101C00000E00067B024038210A0006DD00000000BD
-:101C10008C8300048C82000424420040046100078D
-:101C2000AC8200048C820004044000040000000028
-:101C30008C82000024420001AC8200009602000069
-:101C40003042FFFF50520001A60000009622000023
-:101C500024420001A62200003C0280083442010018
-:101C6000962300009442003C144300048FBF001CE4
-:101C700024020001A62200008FBF001C8FB20018B2
-:101C80008FB100148FB0001003E0000827BD0020C2
-:101C900027BDFFE03C028008AFBF001834420100BE
-:101CA0008C4800343C03800034690400AC68003880
-:101CB0008C42003830E700FFAF890020AC62003C66
-:101CC0003C020005AC620030000000000000000093
-:101CD0000000000000000000000000000000000004
-:101CE0008C82000C8C82000C9783000EAD220000C9
-:101CF0008C82001000604021AD2200048C8200180C
-:101D0000AD2200088C82001CAD22000C8CA20014B5
-:101D1000AD2200108C820020AD22001490820005BC
-:101D2000304200FF00021200AD2200188CA2001801
-:101D3000AD22001C8CA2000CAD2200208CA2001051
-:101D4000AD2200248CA2001CAD2200288CA2002011
-:101D5000AD22002C3402FFFFAD260030AD20003450
-:101D6000506200013408FFFFAD28003850E0001138
-:101D70003C0280083C0480083484010094820050B6
-:101D80003042FFFFAD22003C948300449485004420
-:101D9000240200013063FFFF000318C20064182111
-:101DA0009064005430A5000700A210040A00074800
-:101DB0000044102534420100AD20003C944300440F
-:101DC000944400443063FFFF000318C200621821EE
-:101DD0003084000790650054240200010082100442
-:101DE0000002102700451024A062005400000000EB
-:101DF00000000000000000003C02000634420040E9
-:101E00003C038000AC6200300000000000000000D5
-:101E1000000000008C620000304200101040FFFD06
-:101E20003C06800834C201503463040034C7014AC0
-:101E300034C4013434C5014034C60144AFA200109B
-:101E40000E0006BEAF8300208FBF001803E000081D
-:101E500027BD00208F83000C3C0608008CC600E8DC
-:101E60008F82001430633FFF000319800046102169
-:101E7000004310212403FF80004318243C06800007
-:101E8000ACC300283042007F3C03800C004330216B
-:101E900090C2000D30A500FF000038213442001030
-:101EA000A0C2000D8F89000C3C0280083442010062
-:101EB00094430044000913823048000324020001C7
-:101EC000A4C3000E1102000B2902000210400005FD
-:101ED000240200021100000C240300010A000790F4
-:101EE0000000182111020006000000000A000790FF
-:101EF000000018218CC2002C0A0007902443000126
-:101F00008CC20014244300018CC200180043102B23
-:101F10005040000A240700012402002714A20003F5
-:101F20003C0380080A00079D240700013463010078
-:101F30009462004C24420001A462004C0009138208
-:101F4000304300032C620002104000090080282169
-:101F5000146000040000000094C200340A0007ADC1
-:101F60003046FFFF8CC600380A0007AD00802821EC
-:101F7000000030213C040800248452C00A0006F20C
-:101F80000000000027BDFF90AFB60068AFB5006449
-:101F9000AFB40060AFB3005CAFB20058AFB1005453
-:101FA000AFBF006CAFB000508C9000000080B0213B
-:101FB0003C0208008C4200E8960400328F83001433
-:101FC0002414FF8030843FFF006218210004218028
-:101FD00000641821007410243C13800000A090219C
-:101FE00090A50000AE620028920400323C02800CF2
-:101FF0003063007F00628821308400C024020040EA
-:10200000148200320000A8218E3500388E2200187C
-:102010001440000224020001AE2200189202003C8B
-:10202000304200201440000E8F830014000511C0C0
-:102030002442024000621821306400783C02008093
-:102040000082202500741824AE630800AE640810D6
-:102050008E2200188E03000800431021AE220018C3
-:102060008E22002C8E230018244200010062182BBF
-:102070001060004300000000924200002442000172
-:10208000A24200003C0308008C6300F4304200FFD1
-:1020900050430001A2400000924200008F840014CF
-:1020A000000211C024420240248300403063007FBC
-:1020B000008220213C02800A009420240062182122
-:1020C000AE6400240A0008BEAEC3000092030032D2
-:1020D0002402FFC000431024304200FF14400005DA
-:1020E00024020001AE220018962200340A00082EB5
-:1020F0003055FFFF8E22001424420001AE2200184A
-:102100009202003000021600000216030441001C77
-:10211000000000009602003227A400100080282151
-:10212000A7A2001696020032000030212407000109
-:102130003042FFFFAF82000C0E0006F2AFA0001C81
-:10214000960200328F8300143C0408008C8400E85F
-:1021500030423FFF00021180006418210062182104
-:1021600000741024AE62002C3063007F3C02800EAD
-:10217000006218219062000D3042007FA062000DC5
-:102180009222000D30420010504000789242000030
-:102190003C028008344401009482004C8EC300004D
-:1021A0003C130800967300C62442FFFFA482004C33
-:1021B000946200329623000E3054FFFF3070FFFF10
-:1021C0003C0308008C6300D000701807A7A30038F8
-:1021D0009482003E3063FFFF3042FFFF146200072D
-:1021E000000000008C8200303C038000244200305C
-:1021F000AC62003C0A0008568C82002C948200409D
-:102200003042FFFF5462000927A400408C8200384E
-:102210003C03800024420030AC62003C8C820034DD
-:10222000AC6200380A0008653C03800027A500382E
-:1022300027A60048026038210E00067BA7A00048B0
-:102240008FA300403C02800024630030AC43003880
-:102250008FA30044AC43003C3C0380003C020005DB
-:10226000AC6200303C028008344401009482004299
-:10227000346304003042FFFF0202102B14400007B9
-:10228000AF8300209482004E94830042020210210A
-:10229000004310230A00087B3043FFFF9483004E65
-:1022A0009482004202631821005010230062182318
-:1022B0003063FFFF3C028008344401009482003CFC
-:1022C0003042FFFF14430003000000000A00088BA7
-:1022D000240300019482003C3042FFFF0062102B77
-:1022E000144000058F8200209482003C006210237D
-:1022F0003043FFFF8F820020AC550000AC4000044B
-:10230000AC540008AC43000C3C0200063442001000
-:102310003C038000AC6200300000000000000000C0
-:10232000000000008C620000304200101040FFFDF1
-:102330003C04800834840100001018C20064182195
-:102340009065005432020007240600010046100484
-:1023500000451025A0620054948300429622000E8E
-:1023600050430001A3860010924200002442000165
-:10237000A24200003C0308008C6300F4304200FFDE
-:1023800050430001A2400000924200008F840014DC
-:10239000000211C024420240248300400082202118
-:1023A0002402FF80008220243063007F3C02800AE8
-:1023B000006218213C028000AC440024AEC300003F
-:1023C0008FBF006C8FB600688FB500648FB400605B
-:1023D0008FB3005C8FB200588FB100548FB00050A3
-:1023E00003E0000827BD007027BDFFD8AFB3001C75
-:1023F000AFB20018AFB10014AFB00010AFBF0020F3
-:102400000080982100E0802130B1FFFF0E000D45D3
-:1024100030D200FF000000000000000000000000BB
-:102420008F8200188F83001CAC510000AC52000456
-:10243000AC530008AC40000CAC400010AC400014A1
-:10244000AC4000189463001E02038025AC50001CB1
-:102450000000000000000000000000002404000153
-:102460008FBF00208FB3001C8FB200188FB10014F3
-:102470008FB000100A000D7927BD002830A5FFFF9E
-:102480000A0008C830C600FF3C028008344301003F
-:102490009462000E3C080800950800C63046FFFF15
-:1024A00014C000043402FFFF946500DA0A00091525
-:1024B0008F84001410C20027000000009462004EB8
-:1024C0009464003C3045FFFF00A6102300A6182BA3
-:1024D0003087FFFF106000043044FFFF00C5102369
-:1024E00000E210233044FFFF0088102B1040000E44
-:1024F00000E810233C02800834440100240300015A
-:1025000034420080A44300162402FFFFA482000E80
-:10251000948500DA8F8400140000302130A5FFFF7D
-:102520000A0008ED3C0760200044102A1040000912
-:102530003C0280083443008094620016304200015F
-:10254000104000043C0280009442007E24420014AB
-:10255000A462001603E000080000000027BDFFE0B1
-:102560003C028008AFBF001CAFB00018344201002D
-:10257000944300429442004C104000193068FFFF21
-:102580009383001024020001146200298FBF001CF5
-:102590003C06800834D00100000810C20050102111
-:1025A000904200543103000734C70148304200FF15
-:1025B000006210073042000134C9014E34C4012CBE
-:1025C00034C5013E1040001634C601420E0006BE5E
-:1025D000AFA90010960200420A0009323048FFFFFE
-:1025E0003C028008344401009483004494820042F9
-:1025F0001043000F8FBF001C94820044A48200424D
-:1026000094820050A482004E8C820038AC8200304C
-:1026100094820040A482003E9482004AA482004832
-:102620008FBF001C8FB000180A0008F027BD0020E3
-:102630008FB0001803E0000827BD002027BDFFA0D1
-:10264000AFB1004C3C118000AFBF0058AFB3005495
-:10265000AFB20050AFB000483626018890C20003E8
-:102660003044007FA3A400108E32018090C200008D
-:102670003043007F240200031062003BAF9200143D
-:102680002862000410400006240200042402000214
-:10269000106200098FBF00580A000AFB8FB3005474
-:1026A0001062004D240200051062014E8FBF0058D9
-:1026B0000A000AFB8FB30054000411C0024210212B
-:1026C0002404FF802442024000441024264300409A
-:1026D000AE2200243063007F3C02800A0062182191
-:1026E0009062003CAFA3003C00441025A062003C77
-:1026F0008FA3003C9062003C304200401040016CCF
-:102700008FBF00583C108008A380001036100100D5
-:102710008E0200D08C63003427A4003C27A5001053
-:10272000004310210E0007AFAE0200D093A20010AC
-:102730003C038000A20200C58C6202780440FFFEC8
-:102740008F820014AC62024024020002A0620244A4
-:102750003C021000AC6202780E0009250000000067
-:102760000A000AFA8FBF00583C05800890C3000198
-:1027700090A2000B1443014E8FBF005834A4008078
-:102780008C8200189082004C90A200083C026000ED
-:102790008C4254048C8300183C027FFF3442FFFFBC
-:1027A000006218243C0208008C4200B4AC8300187C
-:1027B0003C038000244200013C010800AC2200B42C
-:1027C0008C6201F80440FFFE8F820014AC6201C0ED
-:1027D0000A000AC2240200023C10800890C30001D3
-:1027E0009202000B144301328FBF005827A4001837
-:1027F00036050110240600033C0260008C4254049C
-:102800000E000E080000000027A40028360501E095
-:102810000E000E08240600038FA2002836030100D4
-:10282000AE0200648FA2002CAE0200688FA20030BE
-:10283000AE02006C93A40018906300C52402FF80D0
-:102840000082102400431025304900FF3084007FAF
-:102850003122007F0082102A544000013929008073
-:10286000000411C0244202402403FF8002421021D0
-:1028700000431024AE220094264200403042007FE4
-:102880003C038006004340218FA3001C2402FFFF6D
-:10289000AFA800403C130800927300F710620033A9
-:1028A00093A2001995030014304400FF3063FFFF2A
-:1028B0000064182B10600010000000009504001444
-:1028C0008D07001C8D0600183084FFFF0044202374
-:1028D0000004210000E438210000102100E4202B36
-:1028E00000C2302100C43021AD07001CAD06001825
-:1028F0000A000A1B93A20019950400148D07001CFE
-:102900008D0600183084FFFF008220230004210080
-:10291000000010210080182100C2302300E4202B89
-:1029200000C4302300E33823AD07001CAD060018B7
-:1029300093A200198FA30040A462001497A2001A6A
-:10294000A46200168FA2001CAC6200108FA2001CB3
-:10295000AC62000C93A20019A462002097A2001A96
-:10296000A46200228FA2001CAC6200243C048008F8
-:10297000348300808C6200388FA2002001208821DF
-:10298000AC62003C8FA20020AC82000093A2001831
-:10299000A062004C93A20018A0820009A060006809
-:1029A00093A20018105100512407FF803229007FA4
-:1029B000000911C024420240024210213046007F2B
-:1029C0003C03800000471024AC6200943C02800667
-:1029D00000C2302190C2003CAFA600400000202180
-:1029E00000471025A0C2003C8FA8004095020002BD
-:1029F000950300148D07001C3042FFFF3063FFFF7A
-:102A00008D060018004310230002110000E2382157
-:102A100000E2102B00C4302100C23021AD07001CA1
-:102A2000AD06001895020002A5020014A5000016CC
-:102A30008D020008AD0200108D020008AD02000CEE
-:102A400095020002A5020020A50000228D020008C8
-:102A5000AD0200249102003C304200401040001AB8
-:102A6000262200013C108008A3A90038A380001092
-:102A7000361001008E0200D08D03003427A40040E0
-:102A800027A50038004310210E0007AFAE0200D08A
-:102A900093A200383C038000A20200C58C62027839
-:102AA0000440FFFE8F820014AC6202402402000248
-:102AB000A06202443C021000AC6202780E000925BC
-:102AC00000000000262200013043007F1473000440
-:102AD000004020212403FF800223102400432026ED
-:102AE00093A200180A000A37309100FF93A400183F
-:102AF0008FA3001C2402FFFF1062000A308900FF30
-:102B000024820001248300013042007F1453000519
-:102B1000306900FF2403FF80008310240043102647
-:102B2000304900FF3C0280089042000801208821C3
-:102B3000305000FF123000193222007F000211C015
-:102B400002421021244202402403FF800043182443
-:102B50003C048000AC8300943042007F3C0380063C
-:102B6000004310218C43000C004020211060000B1A
-:102B7000AFA200400E00056A0000000026230001FD
-:102B80002405FF803062007F1453000202252024B8
-:102B9000008518260A000A9B307100FF3C0480085B
-:102BA000348400808C8300183C027FFF3442FFFF96
-:102BB00000621824AC8300183C0380008C6201F88A
-:102BC0000440FFFE00000000AC7201C024020002BD
-:102BD000A06201C43C021000AC6201F80A000AFACB
-:102BE0008FBF00583C04800890C300019082000B06
-:102BF0001443002F8FBF00583490008092020008C9
-:102C00003042004010400020000000009202000806
-:102C100000021600000216030441000502402021B4
-:102C20000E000E8D240500930A000AFA8FBF00588B
-:102C30009202000924030018304200FF1443000DE3
-:102C400002402021240500390E000E25000030210D
-:102C50000E0003458F8400148F82FFA82403001206
-:102C6000A04300090E0003508F8400140A000AFAE2
-:102C70008FBF0058240500360E000E2500003021BD
-:102C80000A000AFA8FBF00580E00034502402021B7
-:102C9000920200058F840014344200200E0003507D
-:102CA000A20200050E0010368F8400148FBF00585A
-:102CB0008FB300548FB200508FB1004C8FB00048DA
-:102CC00003E0000827BD00603C0280083445010095
-:102CD0003C0280008C42014094A3000E0000302191
-:102CE00000402021AF8200143063FFFF3402FFFF59
-:102CF000106200063C0760202402FFFFA4A2000E21
-:102D000094A500DA0A0008ED30A5FFFF03E00008F3
-:102D10000000000027BDFFC83C0280003C06800880
-:102D2000AFB5002CAFB1001CAFBF0030AFB400286E
-:102D3000AFB30024AFB20020AFB00018345101008F
-:102D400034C501008C4301008E2200148CA400D4F1
-:102D50000000A821AF830014004410231840005243
-:102D6000A38000108E22001400005021ACA200D4D9
-:102D700090C3000890A200C53073007FA3A200108A
-:102D80008CB200D08CB400D4304200FF1053003B12
-:102D900093A200108F8300142407FF80000211C04B
-:102DA00000621021244202402463004000471024A6
-:102DB0003063007F3C0980003C08800A00681821CD
-:102DC000AD2200248C62003427A4001427A5001033
-:102DD000024280210290102304400028AFA3001477
-:102DE0009062003C00E21024304200FF14400019C1
-:102DF000020090219062003C34420040A062003CFE
-:102E00008F86001493A3001024C200403042007F3C
-:102E1000004828213C0208008C4200F42463000191
-:102E2000306400FF14820002A3A30010A3A00010CE
-:102E300093A20010AFA50014000211C0244202406A
-:102E400000C2102100471024AD2200240A000B31DB
-:102E500093A200100E0007AF000000003C028008A3
-:102E600034420100AC5000D093A30010240A0001AA
-:102E7000A04300C50A000B3193A2001024020001F8
-:102E8000154200093C0380008C6202780440FFFE7A
-:102E90008F820014AC62024024020002A06202444D
-:102EA0003C021000AC6202789222000B2403000264
-:102EB000304200FF14430072000000009622000818
-:102EC000304300FF24020082146200402402008488
-:102ED0003C028000344901008D22000C952300063D
-:102EE000000216023063FFFF3045003F2402002736
-:102EF00010A2000FAF83000C28A200281040000889
-:102F0000240200312402002110A20009240200251D
-:102F100010A20007938200110A000BA90000000014
-:102F200010A20007938200110A000BA90000000004
-:102F30000E000763012020210A000C290000000078
-:102F40003C0380008C6202780440FFFE8F820014F4
-:102F5000AC62024024020002A06202443C02100063
-:102F6000AC6202780A000C290000000095230006DC
-:102F7000912400058D25000C8D2600108D2700184A
-:102F80008D28001C8D290020244200013C010800EE
-:102F9000A42352C63C010800A02452C53C010800ED
-:102FA000AC2552CC3C010800AC2652D03C010800B4
-:102FB000AC2752D83C010800AC2852DC3C01080088
-:102FC000AC2952E00A000C29A38200111462000A05
-:102FD000240200813C02800834420100944500DA5A
-:102FE000922600058F84001430A5FFFF30C600FF35
-:102FF0000A000BEA3C0760211462005C000000003C
-:103000009222000A304300FF306200201040000787
-:10301000306200403C02800834420100944500DAEE
-:103020008F8400140A000BE82406004010400007BB
-:10303000000316003C02800834420100944500DA87
-:103040008F8400140A000BE82406004100021603D6
-:10305000044100463C02800834420100944500DAF5
-:103060008F8400142406004230A5FFFF3C0760193E
-:103070000E0008ED000000000A000C29000000000E
-:103080009222000B24040016304200FF1044000678
-:103090003C0680009222000B24030017304200FF00
-:1030A000144300320000000034C5010090A2000B60
-:1030B000304200FF1444000B000080218CA200204D
-:1030C0008CA400202403FF80004310240002114040
-:1030D0003084007F004410253C032000004310256D
-:1030E000ACC2083094A200080002140000021403CD
-:1030F000044200012410000194A200083042008024
-:103100005040001A0200A82194A20008304220007A
-:10311000504000160200A8218CA300183C021C2D70
-:10312000344219ED106200110200A8213C0208008F
-:103130008C4200D4104000053C02800824030004A7
-:1031400034420100A04300EC3C02800834420100FC
-:10315000944500DA8F8400142406000630A5FFFF92
-:103160000E0008ED3C0760210200A8210E00092591
-:10317000000000009222000A3042000810400004C3
-:1031800002A010210E00133A0000000002A010213E
-:103190008FBF00308FB5002C8FB400288FB3002470
-:1031A0008FB200208FB1001C8FB0001803E0000820
-:1031B00027BD00382402FF80008220243C029000BA
-:1031C00034420007008220253C028000AC440020ED
-:1031D0003C0380008C6200200440FFFE00000000E1
-:1031E00003E00008000000003C0380002402FF8090
-:1031F000008220243462000700822025AC64002075
-:103200008C6200200440FFFE0000000003E0000884
-:10321000000000003C028008240300053442010045
-:10322000A04300EC3C0280008C4201003C03800083
-:10323000AF8200148C6202780440FFFE8F8200147B
-:10324000AC62024024020002A06202443C02100070
-:10325000AC62027803E000080000000027BDFFE830
-:103260003C068000AFBF001034C7010094E20008A4
-:10327000304400FF38830082388200842C630001D0
-:103280002C420001006218251060002D24020083EA
-:1032900093820011504000368FBF00103C0208009E
-:1032A000904252CC8CC401003C06080094C652C621
-:1032B0003045003F38A3003238A2003F2C630001A4
-:1032C0002C42000100621825AF840014AF86000C68
-:1032D000A38000111460000700E0202124020020D8
-:1032E00014A20012000000003402FFFF14C2000FFD
-:1032F000000000002402002014A2000500E02821A4
-:103300008CE300142402FFFF5062000B8FBF0010FB
-:103310003C040800248452C0000030210E0006F254
-:10332000240700010A000C9C8FBF00100E000763E9
-:10333000000000008FBF00100A00092527BD0018FB
-:10334000148200062482FF808CC301043C026020AA
-:10335000AC4300140A000CD28FBF0010304200FFB3
-:103360002C42000210400004240200228FBF0010F3
-:103370000A000B1327BD0018148200048F82001C62
-:103380008FBF00100A000C5327BD00188C42000CA0
-:103390001040001E00E0282190E3000924020018DC
-:1033A00014620003240200160A000CBD2403000866
-:1033B0001462000724020017240300123C02800854
-:1033C00034420080A04300090A000CCA94A70008F8
-:1033D0005462000794A700088F82FFA82404FFFE10
-:1033E0009043000500641824A043000594A700083A
-:1033F00090A6001B8CA4000094A500068FBF0010AF
-:1034000000073C000A0008C827BD00188FBF001045
-:1034100003E0000827BD00188F85001C3C048000D5
-:1034200094A2002A8CA30034000230C02402FFF0D2
-:1034300000C2102400621821AC83003C8CA2003032
-:103440003C038000AC8200383C0200503442001043
-:10345000AC6200300000000000000000000000002E
-:103460008C620000304200201040FFFD30C2000896
-:10347000104000063C0280008C620408ACA20020D0
-:103480008C62040C0A000CF5ACA200248C430400EE
-:10349000ACA300208C420404ACA200243C03002016
-:1034A0003C028000AC4300303C0480008C82003041
-:1034B000004310241440FFFD8F86001C3C02004096
-:1034C000AC82003094C3002A94C2002894C4002C1B
-:1034D00094C5002E24630001004410213064FFFFD6
-:1034E000A4C2002814850002A4C3002AA4C0002A94
-:1034F00003E00008000000008F84001C27BDFFE8E7
-:103500003C05800424840010AFBF00100E000E089C
-:103510002406000A8F84001C948200129483002EDB
-:103520003042000F244200030043180424027FFFAE
-:103530000043102B10400002AC8300000000000D7F
-:103540000E000CD4000000008F83001C8FBF001001
-:1035500027BD0018946200149463001A3042000FD3
-:1035600000021500006218253C02800003E00008FC
-:10357000AC4300A08F83001C3C02800494440006EE
-:103580009462001A8C650000A464001600441023A5
-:103590003042FFFF0045102B03E0000838420001D5
-:1035A0008F84001C3C0780049486001A8C850000E0
-:1035B00094E20006A482001694E3000600C31023E0
-:1035C0003042FFFF0045102B384200011440FFF845
-:1035D000A483001603E00008000000008F84001C94
-:1035E0003C028004944200069483001A8C850000FB
-:1035F000A4820016006210233042FFFF0045102B0A
-:10360000384200015040000D8F85001C00603021C1
-:103610003C07800494E20006A482001694E30006AE
-:1036200000C310233042FFFF0045102B3842000139
-:103630001440FFF8A48300168F85001C3C03800013
-:10364000346204008CA40020AF820018AC640038FF
-:103650008CA20024AC62003C3C020005AC6200304D
-:1036600003E00008ACA000048F84001C3C030006AB
-:103670008C82000400021140004310253C038000AE
-:10368000AC620030000000000000000000000000FC
-:103690008C620000304200101040FFFD34620400D4
-:1036A000AC80000403E00008AF8200188F86001C85
-:1036B00027BDFFE0AFB10014AFB00010AFBF0018DE
-:1036C0008CC300048CC500248F820018309000FF4A
-:1036D00094C4001A246300012442002024840001C1
-:1036E00024A70020ACC30004AF820018A4C4001AB1
-:1036F000ACC7002404A100060000882104E20005F4
-:1037000094C2001A8CC2002024420001ACC20020E6
-:1037100094C2001A94C300282E040001004310260E
-:103720002C420001004410245040000594C2001AAD
-:1037300024020001ACC2000894C2001A94C30028FD
-:103740000010202B004310262C42000100441025BD
-:1037500014400007000000008CC200081440000460
-:10376000240200108CC300041462000F8F85001C1B
-:103770000E000D68241100018F82001C9443002864
-:103780009442001A14430003000000000E000CD401
-:1037900000000000160000048F85001C0E000D457F
-:1037A000000000008F85001C94A2001E94A4001C41
-:1037B000244200013043FFFF14640002A4A2001E53
-:1037C000A4A0001E1200000A3C02800494A200146F
-:1037D00094A3001A3042000F000215000062182561
-:1037E0003C028000AC4300A00A000DDFACA0000842
-:1037F0009442000694A3001A8CA40000A4A2001610
-:10380000006210233042FFFF0044102B38420001B9
-:103810001040000D02201021006030213C07800480
-:1038200094E20006A4A2001694E3000600C310234D
-:103830003042FFFF0044102B384200011440FFF8D3
-:10384000A4A30016022010218FBF00188FB100140E
-:103850008FB0001003E0000827BD002003E000083F
-:10386000000000008F8200243C030006000211408B
-:10387000004310253C038000AC62003000000000D3
-:1038800000000000000000008C62000030420010C8
-:103890001040FFFD34620400AF82002003E0000806
-:1038A000AF80002403E000080000102103E00008BE
-:1038B000000000003084FFFF30A5FFFF000018214A
-:1038C000108000070000000030820001104000025C
-:1038D00000042042006518210A000DFE0005284062
-:1038E00003E000080060102110C0000624C6FFFF9E
-:1038F0008CA2000024A50004AC8200000A000E087F
-:103900002484000403E000080000000010A0000868
-:1039100024A3FFFFAC8600000000000000000000B0
-:103920002402FFFF2463FFFF1462FFFA24840004D3
-:1039300003E00008000000003C02800834420080E0
-:1039400024030001AC43000CA4430010A443001264
-:10395000A443001403E00008A44300168F82001C57
-:1039600027BDFFD8AFB3001CAFB20018AFB1001431
-:10397000AFB00010AFBF00208C47000C2482008045
-:103980002409FF803C08800E3043007F00808021A6
-:103990003C0A8000004920240068182130B100FF53
-:1039A00030D200FF10E0002900009821260201001B
-:1039B000AD44002C004928243042007F00482021DB
-:1039C0009062000024030050304200FF14430004C2
-:1039D00000000000AD45002C948200DA3053FFFF58
-:1039E0000E000D45000000008F82001C8F83001820
-:1039F00000112C009442001E0012240034840001A7
-:103A000000A228253C02400000A22825AC7000003E
-:103A10008FBF0020AC6000048FB20018AC730008A8
-:103A20008FB10014AC60000C8FB3001CAC640010AC
-:103A30008FB00010AC60001424040001AC600018CA
-:103A400027BD00280A000D79AC65001C8FBF00203F
-:103A50008FB3001C8FB200188FB100148FB000100C
-:103A600003E0000827BD00283C06800034C20100A6
-:103A70009043000F240200101062000E2865001110
-:103A800010A0000724020012240200082405003AB6
-:103A9000106200060000302103E000080000000072
-:103AA000240500351462FFFC000030210A000E25B9
-:103AB000000000008CC200748F83FFA824420FA076
-:103AC00003E00008AC62000C27BDFFE8AFBF0010A8
-:103AD0000E000355240500013C0480088FBF001030
-:103AE0002402000134830080A462001227BD001864
-:103AF0002402000103E00008A080001A27BDFFE0B7
-:103B0000AFB20018AFB10014AFB00010AFBF001CCF
-:103B100030B2FFFF0E000345008088213C02800880
-:103B2000345000809202000924030004304200FF58
-:103B30001443000C3C028008124000082402000AD2
-:103B40000E000E1C00000000920200052403FFFE80
-:103B500000431024A202000524020012A202000960
-:103B60003C02800834420080022020210E000350D5
-:103B7000A040002716400003022020210E000E80E6
-:103B80000000000002202021324600FF8FBF001CF1
-:103B90008FB200188FB100148FB0001024050038C8
-:103BA0000A000E2527BD002027BDFFE0AFBF001C87
-:103BB000AFB20018AFB10014AFB000100E00034553
-:103BC000008080210E000E1C000000003C028008D6
-:103BD0003445008090A2000924120018305100FFE3
-:103BE000123200030200202124020012A0A20009C8
-:103BF00090A200052403FFFE004310240E00035092
-:103C0000A0A2000502002021240500201632000792
-:103C1000000030218FBF001C8FB200188FB100143C
-:103C20008FB000100A00035527BD00208FBF001C75
-:103C30008FB200188FB100148FB000102405003926
-:103C40000A000E2527BD002027BDFFE83C028000AA
-:103C5000AFB00010AFBF0014344201009442000C1A
-:103C6000240500360080802114400012304600FFF9
-:103C70000E000345000000003C0280083442008032
-:103C800024030012A0430009904300053463001090
-:103C90000E000E1CA04300050E0003500200202160
-:103CA000020020210E000355240500200A000EFD0D
-:103CB000000000000E000E25000000000E0003456D
-:103CC000020020213C0280089043001B2405FF9F36
-:103CD00002002021006518248FBF00148FB000104F
-:103CE000A043001B0A00035027BD001827BDFFE0BA
-:103CF000AFBF0018AFB10014AFB0001030B100FF7B
-:103D00000E000345008080213C028008240300123D
-:103D1000344200800E000E1CA04300090E00035028
-:103D20000200202102002021022030218FBF001834
-:103D30008FB100148FB00010240500350A000E2545
-:103D400027BD00203C0480089083000E9082000A6A
-:103D50001443000B000028218F82FFA82403005089
-:103D60002405000190420000304200FF144300048B
-:103D7000000000009082000E24420001A082000E8C
-:103D800003E0000800A010213C0380008C6201F8D1
-:103D90000440FFFE24020002AC6401C0A06201C422
-:103DA0003C02100003E00008AC6201F827BDFFE010
-:103DB000AFB200183C128008AFB10014AFBF001CB6
-:103DC000AFB0001036510080922200092403000A8F
-:103DD000304200FF1443003E000000008E43000408
-:103DE0008E220038506200808FBF001C922200009B
-:103DF00024030050304200FF144300253C028000A1
-:103E00008C4201408E4300043642010002202821EA
-:103E1000AC43001C9622005C8E2300383042FFFF2A
-:103E20000002104000621821AE23001C8E430004E3
-:103E30008E2400389622005C006418233042FFFF75
-:103E400000031843000210400043102A10400006EF
-:103E5000000000008E4200048E230038004310232F
-:103E60000A000F6B000220439622005C3042FFFFE5
-:103E7000000220403C0280083443010034420080AC
-:103E8000ACA4002CA040002424020001A062000C7D
-:103E90000E000F1F00000000104000538FBF001CD9
-:103EA0003C0280008C4401403C0380008C6201F89D
-:103EB0000440FFFE24020002AC6401C0A06201C401
-:103EC0003C021000AC6201F80A000FC88FBF001C52
-:103ED0009222000924030010304200FF1443000422
-:103EE0003C0280008C4401400A000FAF00002821F2
-:103EF0009222000924030016304200FF14430006FA
-:103F000024020014A22200093C0280008C440140DB
-:103F10000A000FC28FBF001C8E2200388E23003C87
-:103F200000431023044100308FBF001C9222002761
-:103F300024420001A2220027922200272C420004E2
-:103F4000144000163C108000922200092403000453
-:103F5000304200FF144300093C0280008C440140C1
-:103F60008FBF001C8FB200188FB100148FB00010EB
-:103F7000240500930A000E8D27BD00208C440140CB
-:103F8000240500938FBF001C8FB200188FB100145E
-:103F90008FB000100A000F0927BD00208E040140D9
-:103FA0000E000345000000008E4200042442FFFF83
-:103FB000AE4200048E22003C2442FFFFAE22003CB1
-:103FC0000E0003508E0401408E0401408FBF001C80
-:103FD0008FB200188FB100148FB0001024050004B8
-:103FE0000A00035527BD00208FB200188FB10014BE
-:103FF0008FB0001003E0000827BD00203C068000C1
-:104000008CC201883C038008346500809063000EF8
-:1040100000021402304400FF306300FF1464000EFD
-:104020003C02800890A20026304200FF10440009A4
-:104030008F82FFA8A0A40026240300509042000015
-:10404000304200FF14430006000000000A00058D06
-:104050008CC401803C02800834420080A0440026C9
-:1040600003E000080000000027BDFFE030E700FF8C
-:10407000AFB20018AFBF001CAFB10014AFB000105A
-:104080000080902114E0000630C600FF0000000010
-:104090000000000D000000000A0010212400010EA5
-:1040A0003C0380089062000E304200FF144600235B
-:1040B0003462008090420026304200FF1446001F08
-:1040C000000000009062000F304200FF1446001B09
-:1040D000000000009062000A304200FF1446000316
-:1040E0008F90FFA80000000D8F90FFA88F82FFAC7B
-:1040F0003C118000AE05003CAC450000A066000A03
-:104100000E0003458E240100A20000240E0003507F
-:104110008E2401003C0380008C6201F80440FFFE05
-:1041200024020002AC7201C0A06201C43C02100073
-:10413000AC6201F80A0010228FBF001C00000000D2
-:104140000000000D00000000240001378FBF001C9C
-:104150008FB200188FB100148FB0001003E0000878
-:1041600027BD00208F83FFA83C0280008C44010003
-:10417000344201008C65003C9046001B0A000FE8A9
-:10418000240700013C0280089043000E9042000A80
-:1041900000431026304200FF03E000080002102B0D
-:1041A00027BDFFE03C028008AFB10014AFB00010A3
-:1041B000AFBF001834500080920200052403003085
-:1041C0003042003014430085008088218F82001C1B
-:1041D0008C42000C104000828FBF00180E000D456D
-:1041E000000000008F860018ACD100009202000889
-:1041F00092030009304200FF00021200306300FF0A
-:1042000000431025ACC200049202004D00021600CB
-:104210000002160304410005000000003C030800F2
-:104220008C6300480A0010603C108008920200086D
-:104230003042004014400003000018219202002781
-:10424000304300FF3C108008361100809222004D60
-:1042500000031E00304200FF000214000062182517
-:10426000ACC300088E2400308F82001CACC4000C4C
-:104270008E2500349443001E3C02C00BACC50010D8
-:10428000006218258E22003800002021ACC20014E4
-:104290008E22003CACC200180E000D79ACC3001C8D
-:1042A0008E0200048F8400183C058000AC82000060
-:1042B0008E220020AC8200048E22001CAC820008FA
-:1042C0008E2200588CA3007400431021AC82000C95
-:1042D0008E22002CAC8200108E2200408E230044DF
-:1042E0000002140000431025AC8200149222004DFD
-:1042F00024030080304200FF14430004000000004B
-:10430000AC8000180A0010A48F82001C8E23000CC1
-:10431000240200011062000E2402FFFF9222000816
-:10432000304200401440000A2402FFFF8E23000C9C
-:104330008CA20074006218233C0208000062102462
-:1043400014400002000028210060282100051043CD
-:10435000AC8200188F82001C000020219443001EB4
-:104360003C02C00C006218258F8200180E000D79E7
-:10437000AC43001C3C038008346201008C42000006
-:104380008F850018346300808FBF0018ACA2000036
-:10439000ACA000048C6400488F82001C8FB1001414
-:1043A000ACA40008ACA0000CACA000109063000509
-:1043B0009446001E3C02400D00031E0000C2302542
-:1043C000ACA300148FB00010ACA0001824040001AE
-:1043D000ACA6001C0A000D7927BD00208FBF001875
-:1043E0008FB100148FB0001003E0000827BD00203B
-:1043F0003C0280009443007C3C028008344601006B
-:10440000308400FF3065FFFF2402000524A34650DE
-:10441000A0C4000C5482000C3065FFFF90C2000D58
-:104420002C4200071040000724A30A0090C3000D8F
-:10443000240200140062100400A210210A0010E0FF
-:104440003045FFFF3065FFFF3C02800834420080AA
-:1044500003E00008A44500143C0380083468008091
-:10446000AD050038346701008CE2001C308400FF89
-:1044700000A210231840000330C600FF24A2FFFC56
-:10448000ACE2001C30820001504000083C03800870
-:104490008D02003C00A210230441001224040005F8
-:1044A0008C62000410A2000F3C0380088C620004A0
-:1044B00014A2001E000000003C0208008C4200D83C
-:1044C00030420020104000093C0280083462008025
-:1044D000906300089042004C144300043C028008A2
-:1044E000240400040A0010CA0000000034430080C5
-:1044F00034420100A040000C24020001A462001418
-:1045000010C0000A3C0280008C4401003C03800083
-:104510008C6201F80440FFFE24020002AC6401C07A
-:10452000A06201C43C021000AC6201F803E0000884
-:104530000000000027BDFFE800A61823AFBF001051
-:1045400018600080308800FF3C02800834470080FB
-:10455000A0E0002434440100A0E000278C82001C6D
-:1045600000A2102304400056000000008CE2003C32
-:1045700094E3005C8CE4002C004530233063FFFFA3
-:1045800000C318210083202B1080000400E01821B4
-:104590008CE2002C0A00113900A2102194E2005C88
-:1045A0003042FFFF00C2102100A21021AC62001CAB
-:1045B0003C028008344400809482005C8C83001CA0
-:1045C0003042FFFF0002104000A210210043102BD8
-:1045D00010400004000000008C82001C0A00114CF6
-:1045E0003C0680089482005C3042FFFF00021040CD
-:1045F00000A210213C06800834C3010034C70080AB
-:10460000AC82001CA060000CACE500388C62001C81
-:1046100000A210231840000224A2FFFCAC62001C80
-:1046200031020001104000083C0380088CE2003C8D
-:1046300000A2102304410012240400058CC20004CF
-:1046400010A200108FBF00108C62000414A2004F53
-:104650008FBF00103C0208008C4200D8304200207E
-:104660001040000A3C028008346200809063000819
-:104670009042004C144300053C02800824040004CE
-:104680008FBF00100A0010CA27BD001834430080F5
-:1046900034420100A040000C24020001A462001476
-:1046A0003C0280008C4401003C0380008C6201F8D5
-:1046B0000440FFFE240200020A00119900000000DD
-:1046C0008CE2001C004610230043102B54400001D4
-:1046D000ACE5001C94E2005C3042FFFF0062102B4E
-:1046E000144000072402000294E2005C8CE3001CEA
-:1046F0003042FFFF00621821ACE3001C24020002DC
-:10470000ACE500380E000F1FA082000C1040001F07
-:104710008FBF00103C0280008C4401003C038000ED
-:104720008C6201F80440FFFE24020002AC6401C068
-:10473000A06201C43C021000AC6201F80A0011B191
-:104740008FBF001031020010104000108FBF00100A
-:104750003C028008344500808CA3001C94A2005CBD
-:10476000006618233042FFFF006218213C023FFF21
-:104770003444FFFF0083102B5440000100801821B7
-:1047800000C31021ACA2001C8FBF001003E0000882
-:1047900027BD001827BDFFE800C0402100A6302338
-:1047A000AFBF001018C00026308A00FF3C0280080E
-:1047B000344900808D24001C8D23002C0088202388
-:1047C0000064182B1060000F344701008CE20020B9
-:1047D00000461021ACE200208CE200200044102BA7
-:1047E0001440000B3C023FFF8CE2002000441023E9
-:1047F000ACE200209522005C3042FFFF0A0011D19C
-:1048000000822021ACE00020008620213C023FFFF6
-:104810003443FFFF0064102B54400001006020214E
-:104820003C0280083442008000851821AC43001C03
-:10483000A0400024A04000270A0012233C03800867
-:1048400031420010104000433C0380083C068008C1
-:1048500034C400808C82003C004810235840003E45
-:10486000346600809082002424420001A08200244B
-:10487000908200243C0308008C630024304200FF37
-:104880000043102B144000688FBF001034C2010099
-:104890008C42001C00A2102318400063000000009E
-:1048A0008CC300049482005C006818233042FFFF30
-:1048B00000031843000210400043102A1040000576
-:1048C000000000008CC20004004810230A001206F9
-:1048D000000210439482005C3042FFFF000210404F
-:1048E0003C068008AC82002C34C5008094A2005C99
-:1048F0008CA4002C94A3005C3042FFFF0002104007
-:10490000008220213063FFFF008320210104102159
-:10491000ACA2001C8CC2000434C60100ACC2001C56
-:10492000240200020E000F1FA0C2000C1040003E27
-:104930008FBF00103C0280008C4401003C038000CB
-:104940008C6201F80440FFFE240200020A001253A8
-:104950000000000034660080ACC5003834640100FB
-:104960008C82001C00A210231840000224A2FFFC2D
-:10497000AC82001C314200015040000A3C03800818
-:104980008CC2003C00A21023044300142404000540
-:104990008C62000414A200033C0380080A00124544
-:1049A000240400058C62000414A2001F8FBF0010B5
-:1049B0003C0208008C4200D8304200201040000A1F
-:1049C0003C02800834620080906300089042004CF2
-:1049D000144300053C028008240400048FBF00102B
-:1049E0000A0010CA27BD0018344300803442010079
-:1049F000A040000C24020001A46200143C028000CC
-:104A00008C4401003C0380008C6201F80440FFFEEE
-:104A100024020002AC6401C0A06201C43C02100088
-:104A2000AC6201F88FBF001003E0000827BD00183A
-:104A300027BDFFE83C0A8008AFBF00103549008061
-:104A40008D22003C00C04021308400FF004610232E
-:104A50001840009D30E700FF3547010024020001A7
-:104A600000A63023A0E0000CA0E0000DA522001459
-:104A700018C00024308200108D23001C8D22002CD1
-:104A8000006818230043102B1040000F00000000A6
-:104A90008CE2002000461021ACE200208CE20020D5
-:104AA0000043102B1440000B3C023FFF8CE200201F
-:104AB00000431023ACE200209522005C3042FFFF4F
-:104AC0000A00128200621821ACE000200066182162
-:104AD0003C023FFF3446FFFF00C3102B544000014F
-:104AE00000C018213C028008344200800065182173
-:104AF000AC43001CA0400024A04000270A0012D0B4
-:104B00003C038008104000403C0380088D22003C9C
-:104B1000004810235840003D346700809122002453
-:104B200024420001A1220024912200243C03080019
-:104B30008C630024304200FF0043102B1440009A85
-:104B40008FBF00108CE2001C00A2102318400096BA
-:104B5000000000008D4300049522005C00681823CB
-:104B60003042FFFF00031843000210400043102AA8
-:104B700010400005012020218D4200040048102330
-:104B80000A0012B3000210439522005C3042FFFF7E
-:104B9000000210403C068008AC82002C34C5008026
-:104BA00094A2005C8CA4002C94A3005C3042FFFF14
-:104BB00000021040008220213063FFFF0083182193
-:104BC00001031021ACA2001C8CC2000434C60100F9
-:104BD000ACC2001C240200020E000F1FA0C2000C79
-:104BE000104000718FBF00103C0280008C44010017
-:104BF0003C0380008C6201F80440FFFE24020002A6
-:104C00000A0012FA0000000034670080ACE50038AA
-:104C1000346601008CC2001C00A210231840000260
-:104C200024A2FFFCACC2001C3082000150400008EE
-:104C30003C0380088CE2003C00A210230443005196
-:104C4000240400058C62000410A2003E3C0380088E
-:104C50008C62000454A200548FBF00103C02080074
-:104C60008C4200D830420020104000063C028008F0
-:104C700034620080906300089042004C1043004072
-:104C80003C0280083443008034420100A040000C04
-:104C900024020001A46200143C0280008C44010044
-:104CA0003C0380008C6201F80440FFFE24020002F5
-:104CB000AC6401C0A06201C43C021000AC6201F807
-:104CC0000A0013388FBF001024020005A12000271E
-:104CD00014E2000A3C038008354301009062000D95
-:104CE0002C420006504000053C0380089062000DF5
-:104CF00024420001A062000D3C038008346700805C
-:104D0000ACE50038346601008CC2001C00A2102300
-:104D10001840000224A2FFFCACC2001C308200013B
-:104D20005040000A3C0380088CE2003C00A21023A3
-:104D300004410014240400058C62000414A2000342
-:104D40003C0380080A00132F240400058C62000431
-:104D500014A200158FBF00103C0208008C4200D83E
-:104D6000304200201040000A3C028008346200807B
-:104D7000906300089042004C144300053C028008F8
-:104D8000240400048FBF00100A0010CA27BD0018B9
-:104D90003443008034420100A040000C2402000192
-:104DA000A46200148FBF001003E0000827BD0018A4
-:104DB0003C0B800827BDFFE83C028000AFBF00101D
-:104DC00034420100356A00809044000A35690100D0
-:104DD0008C4500148D4800389123000C308400FF6E
-:104DE000010510231C4000B3306700FF2CE20006D1
-:104DF000504000B18FBF00102402000100E23004D7
-:104E000030C200035440000800A8302330C2000C18
-:104E1000144000A130C20030144000A38FBF001026
-:104E20000A0013FC0000000018C0002430820010AB
-:104E30008D43001C8D42002C006818230043102B6A
-:104E40001040000F000000008D22002000461021BD
-:104E5000AD2200208D2200200043102B1440000BB7
-:104E60003C023FFF8D22002000431023AD22002092
-:104E70009542005C3042FFFF0A0013700062182167
-:104E8000AD200020006618213C023FFF3446FFFFA2
-:104E900000C3102B5440000100C018213C028008C0
-:104EA0003442008000651821AC43001CA04000245F
-:104EB000A04000270A0013BE3C03800810400040B9
-:104EC0003C0380088D42003C004810231840003D00
-:104ED000346700809142002424420001A142002452
-:104EE000914200243C0308008C630024304200FF00
-:104EF0000043102B144000708FBF00108D22001C47
-:104F000000A210231840006C000000008D63000414
-:104F10009542005C006818233042FFFF00031843ED
-:104F2000000210400043102A1040000501402021DB
-:104F30008D620004004810230A0013A100021043F0
-:104F40009542005C3042FFFF000210403C068008A2
-:104F5000AC82002C34C5008094A2005C8CA4002C90
-:104F600094A3005C3042FFFF000210400082202129
-:104F70003063FFFF0083182101031021ACA2001C45
-:104F80008CC2000434C60100ACC2001C2402000222
-:104F90000E000F1FA0C2000C104000478FBF001072
-:104FA0003C0280008C4401003C0380008C6201F8CC
-:104FB0000440FFFE240200020A0013EE000000007D
-:104FC00034670080ACE50038346601008CC2001CF8
-:104FD00000A210231840000224A2FFFCACC2001C57
-:104FE000308200015040000A3C0380088CE2003C03
-:104FF00000A2102304430014240400058C62000462
-:1050000014A200033C0380080A0013E024040005F6
-:105010008C62000414A200288FBF00103C0208001C
-:105020008C4200D8304200201040000A3C02800828
-:1050300034620080906300089042004C14430005E5
-:105040003C028008240400048FBF00100A0010CA2C
-:1050500027BD00183443008034420100A040000CFA
-:1050600024020001A46200143C0280008C44010070
-:105070003C0380008C6201F80440FFFE2402000221
-:10508000AC6401C0A06201C43C021000AC6201F833
-:105090000A0013FC8FBF00108FBF001001003021E9
-:1050A0000A00111B27BD0018010030210A00125A06
-:1050B00027BD00188FBF001003E0000827BD0018AF
-:1050C0003C0380083464010024020003A082000C29
-:1050D0008C62000403E00008AC82001C3C058008E0
-:1050E00034A300809062002734A501002406004309
-:1050F00024420001A0620027906300273C020800C0
-:105100008C420048306300FF146200043C076021B9
-:1051100094A500DA0A0008ED30A5FFFF03E00008BF
-:105120000000000027BDFFE8AFBF00103C02800078
-:105130000E0014058C4401803C02800834430100B9
-:10514000A060000C8C4200048FBF001027BD001827
-:1051500003E00008AC62001C27BDFFE03C028008B1
-:10516000AFBF0018AFB10014AFB0001034450080DD
-:10517000344601003C0880008D09014090C3000CBA
-:105180008CA4003C8CA200381482003B306700FFE6
-:105190009502007C90A30027146000093045FFFFB2
-:1051A0002402000554E200083C04800890C2000D6F
-:1051B00024420001A0C2000D0A0014403C048008F3
-:1051C000A0C0000D3C048008348201009042000C15
-:1051D00024030005304200FF1443000A24A205DC2A
-:1051E00034830080906200272C4200075040000565
-:1051F00024A20A0090630027240200140062100415
-:1052000000A210213C108008361000803045FFFFBE
-:10521000012020210E001405A60500149602005C52
-:105220008E0300383C1180003042FFFF0002104026
-:1052300000621821AE03001C0E0003458E240140BD
-:105240009202002534420040A20200250E000350C5
-:105250008E2401408E2401403C0380008C6201F8C2
-:105260000440FFFE24020002AC6401C0A06201C43D
-:105270003C021000AC6201F88FBF00188FB100141F
-:0C5280008FB0001003E0000827BD0020E4
-:04528C008008010095
-:10529000800800808008000000000C8000003200C0
-:1052A0008008024008000EDC08000F3408000F7868
-:1052B00008001010080010508008010080080080CD
-:0452C0008008000062
-:0C52C4000A0000220000000000000000B2
-:1052D0000000000D6370352E302E306A3300000060
-:1052E00005000004000000000000000000000000B5
-:1052F000000000000000000038003C00000000003A
-:10530000000000000000000000000000000000207D
-:10531000000000000000000000000000000000008D
-:10532000000000000000000000000000000000007D
-:105330000000000000000000210038000000000113
-:105340000000002B00000000000000000000000032
-:1053500010000003000000000000000D0000000D20
-:105360003C020800244254243C0308002463564CA9
-:10537000AC4000000043202B1480FFFD24420004B9
-:105380003C1D080037BD9FFC03A0F0213C10080025
-:10539000261000883C1C0800279C54240E0002881C
-:1053A000000000000000000D00A018210080102166
-:1053B000008028213C0460003C07600024060008AF
-:1053C00010600006348420788C420000ACE2200893
-:1053D0008C63000003E00008ACE3200C0A000E2AF6
-:1053E00000000000240300403C02600003E00008CD
-:1053F000AC4320003C0760008F8600008CE52074E1
-:105400000086102100A2182B14600007000028213C
-:105410008F8AFD9824050001A14400138F890000A4
-:1054200001244021AF88000003E0000800A0102103
-:105430008F84FD988F8500009086001330C300FF95
-:1054400000A31023AF82000003E00008A080001337
-:105450008F84FD9827BDFFE8AFB00010AFBF0014E8
-:10546000908900119087001124020028312800FF44
-:105470003906002830E300FF2485002C2CD00001E1
-:10548000106200162484001C0E0000390000000089
-:105490008F8FFD983C0560002402020495EE003ECB
-:1054A00095ED003C000E5C0031ACFFFF016C502517
-:1054B000ACAA20105200000124020004ACA220007B
-:1054C0000000000000000000000000008FBF00147A
-:1054D0008FB0001003E0000827BD00180A0000711B
-:1054E000000028218F85FD9827BDFFD8AFBF002081
-:1054F000AFB3001CAFB20018AFB10014AFB00010D2
-:105500000080982190A4001124B0001C24B1002C2C
-:10551000308300FF386200280E00005B2C5200012F
-:105520000E00006300000000020020211240000273
-:1055300002202821000028210E0000390000000070
-:105540008F8DFD983C0880003C05600095AC003EC6
-:1055500095AB003C02683025000C4C00316AFFFF1F
-:10556000012A3825ACA7201024020202ACA6201480
-:1055700052400001240200028FBF00208FB3001CA4
-:105580008FB200188FB100148FB0001027BD002813
-:1055900003E00008ACA2200027BDFFE0AFB2001876
-:1055A000AFB10014AFB00010AFBF001C3C116000E1
-:1055B0008E2320748F82000030D0FFFF30F2FFFF77
-:1055C0001062000C2406008F0E000039000000005D
-:1055D0003C06801F0010440034C5FF00011238252E
-:1055E00024040002AE27201000003021AE25201434
-:1055F000AE2420008FBF001C8FB200188FB10014A2
-:105600008FB0001000C0102103E0000827BD00206B
-:1056100027BDFFE0AFB0001030D0FFFFAFBF0018D4
-:10562000AFB100140E00003930F1FFFF001024006C
-:10563000009180253C036000AC7020108FBF0018E3
-:105640008FB100148FB0001024020004AC6220005F
-:1056500027BD002003E000080000102127BDFFE85F
-:105660003C0B6018AFBF00108D6F50002418FF7FF7
-:10567000340C807101F8702435CD380C240A0031C7
-:105680003C098000AD6D50003C08800AAD6C53BCF5
-:10569000AD2A00080E00049BAF88002C0E000459B0
-:1056A000000000000E000048000000003C07600001
-:1056B0008CE508082406FFF03C03570900A62024C7
-:1056C0003462F0001082005024190001AF800034D1
-:1056D0000E000BBC000000003C0660168CC40000ED
-:1056E0003C0760148CE500A03C03FFFF00831024FE
-:1056F0003C1F535300051FC2105F003D34C57C00A2
-:1057000094A201F2A780004C10400003A780005C27
-:10571000384B1E1EA78B004C94A201F810400004C9
-:105720008F8D0034384C1E1EA78C005C8F8D00348A
-:1057300011A000049784005C240E0020A78E004C6A
-:105740009784005C2C8F008151E0000124040080CC
-:105750009785004C2CB80401530000012405040077
-:105760003C0260008C4304382419103C307FFFFF5A
-:1057700013F900033087FFFF50E0000F24060050AC
-:10578000A380005E9388005E51000010A784005C37
-:10579000A780005C9785005C8FBF0010A780004C3D
-:1057A000A7800054A78000723C010800AC2500804F
-:1057B00003E0000827BD0018A386005E9388005E02
-:1057C0005500FFF4A780005CA784005CA785004C0F
-:1057D0008FBF00109785005CA7800054A7800072DF
-:1057E0003C010800AC25008003E0000827BD00183C
-:1057F00000035080014648218D2800043C066000CB
-:105800000A00010F010628210A000103AF990034A4
-:105810003083FFFF8F88002C8F87002800032140F2
-:105820003C0580003C020050008248253C06600098
-:105830003C0A010034AC04008CCD08E001AA5824D5
-:1058400011600005000000008CCF08E024E7000193
-:1058500001EA7025ACCE08E08D19001001805821B6
-:10586000ACB900388D180014ACB8003CACA90030BD
-:105870000000000000000000000000000000000028
-:105880000000000000000000000000000000000018
-:105890003C0380008C640000308200201040FFFD3B
-:1058A0003C0F60008DED08E03C0E010001AE1824B5
-:1058B0001460FFE100000000AF87002803E000084B
-:1058C000AF8B00388F85002C240BFFF03C06800046
-:1058D00094A7001A8CA9002430ECFFFF000C38C0FC
-:1058E00000EB5024012A4021ACC8003C8CA40024C9
-:1058F0008CC3003C008310231840003300000000DC
-:105900008CAD002025A200013C0F0050ACC2003835
-:1059100035EE00103C068000ACCE003000000000E8
-:105920000000000000000000000000000000000077
-:105930000000000000000000000000003C048000A7
-:105940008C990000333800201300FFFD30E200087E
-:10595000104000173C0980008C880408ACA8001097
-:105960008C83040CACA300143C1900203C1880006C
-:10597000AF19003094AE001894AF001C01CF302155
-:10598000A4A6001894AD001A25A70001A4A7001A28
-:1059900094AB001A94AC001E118B000300000000B1
-:1059A00003E000080000000003E00008A4A0001AC3
-:1059B0008D2A0400ACAA00108D240404ACA40014A9
-:1059C0000A0001AA3C1900208CA200200A000192C2
-:1059D0003C0F00500A0001800000000027BDFFE8D6
-:1059E000AFBF00100E0001C4000000008F89002C22
-:1059F0008FBF00103C038000A520000A9528000AF4
-:105A00009527000427BD00183105FFFF30E6000F81
-:105A10000006150000A2202503E00008AC64008009
-:105A20003C0508008CA500208F83000427BDFFE8FB
-:105A3000AFB00010AFBF001410A300100000802111
-:105A4000240400010204300400A6202400C3102412
-:105A50005044000626100001001018802787FD9C86
-:105A60001480000A00671821261000012E09000288
-:105A70005520FFF38F830004AF8500048FBF00140F
-:105A80008FB0001003E0000827BD00188C680000EC
-:105A90003C058000ACA800240E0001C626100001C1
-:105AA0003C0508008CA500200A0001EB2E0900022D
-:105AB00024050001008518043C0408008C840020A3
-:105AC00027BDFFC8AFBF003400831024AFBE003035
-:105AD000AFB7002CAFB60028AFB50024AFB400209C
-:105AE000AFB3001CAFB20018AFB1001410400051AA
-:105AF000AFB000108F84002C948700069488000AB1
-:105B000000E8302330D5FFFF12A0004B8FBF0034D8
-:105B1000948B0018948C000A016C50233142FFFFD3
-:105B200002A2482B1520000202A0202100402021C3
-:105B30002C8F000515E0000200809821241300043A
-:105B40000E000153026020218F87002C02609021FB
-:105B5000AF80003094F4000A026080211260004E91
-:105B60003291FFFF3C1670003C1440003C1E2000A8
-:105B70003C1760008F9900388F38000003161824F6
-:105B80001074004F0283F82B17E00036000000006D
-:105B9000107E00478F86003014C0003A24030001B5
-:105BA00002031023022320213050FFFF1600FFF1D3
-:105BB0003091FFFF8F87002C3C1100203C108000AB
-:105BC000AE11003094EB000A3C178000024B5021CC
-:105BD000A4EA000A94E9000A94E800043123FFFFD4
-:105BE0003106000F00062D000065F025AEFE008096
-:105BF00094F3000A94F6001812D3003600122140E4
-:105C00008CFF00148CF4001003E468210000C02114
-:105C100001A4782B0298702101CF6021ACED001413
-:105C2000ACEC001002B2382330F5FFFF16A0FFB82D
-:105C30008F84002C8FBF00348FBE00308FB7002CB4
-:105C40008FB600288FB500248FB400208FB3001CBE
-:105C50008FB200188FB100148FB0001003E000085D
-:105C600027BD00381477FFCC8F8600300E000D8BD7
-:105C700002002021004018218F86003010C0FFC98B
-:105C800002031023027070238F87002C01C3682148
-:105C90000A00027631B2FFFF8F86003014C0FFC9C0
-:105CA0003C1100203C1080000A000240AE11003080
-:105CB0000E0003C4020020210A00026D00401821DA
-:105CC000020020210E0007DB022028210A00026DBD
-:105CD000004018210E000180000000000A00025957
-:105CE00002B2382327BDFFD8AFB40020AFB3001CE9
-:105CF000AFB20018AFB10014AFB00010AFBF0024B6
-:105D00000E0000E6241300013C0280083C03200042
-:105D10003C010800AC200070345400803472000351
-:105D20003C1080002411FF800E0001D7000000000D
-:105D30008E06000038C5000130A400011480FFFA6F
-:105D4000000000008E07010024030C0010E300098E
-:105D50003C0580008E0901002D2830805500001080
-:105D60003C0480008E0B01002D6A31811140000C33
-:105D70003C0480008CAC0100118300040000202151
-:105D80008CAE010025CDFF8131A400FF8E0F0100F4
-:105D90000E0001FBAE0F00240A0002C13C0480008B
-:105DA0008C9F010024180020AC9F002092990000D5
-:105DB000332300FF1078001F2402005010620022DD
-:105DC000000000003C0480008C830100146000038C
-:105DD00000000000566000143C0440008C8201006A
-:105DE0008C990100000098210051F824001F79408F
-:105DF0003338007F01F8702501D26825AC8D08305A
-:105E00008C8C01008C890100258B010001715024CC
-:105E1000000A39403128007F00E8302500D22825CB
-:105E2000AC8508303C044000AE0401380A000299F9
-:105E3000000000008C8501000E00078D2404008006
-:105E40000A0002C13C0480008C8401000E0013EAA9
-:105E5000000000000A0002C13C04800000A4102BD6
-:105E600024030001104000090000302100052840F3
-:105E700000A4102B04A00003000318405440FFFCB2
-:105E8000000528405060000A0004182B0085382BBC
-:105E900054E000040003184200C33025008520238D
-:105EA000000318421460FFF9000528420004182B73
-:105EB00003E0000800C310213084FFFF30C600FF5C
-:105EC0003C0780008CE201B80440FFFE00064C0055
-:105ED000012430253C08200000C820253C03100088
-:105EE000ACE00180ACE50184ACE4018803E000088B
-:105EF000ACE301B83C0660008CC5201C2402FFF016
-:105F000030830200308601001060000E00A22824B9
-:105F100034A500013087300010E0000530830C000C
-:105F200034A500043C04600003E00008AC85201C9C
-:105F30001060FFFD3C04600034A5000803E0000889
-:105F4000AC85201C54C0FFF334A500020A000315E1
-:105F50003087300027BDFFE8AFB00010AFBF00149E
-:105F60003C076000240600021080001100A0802180
-:105F70008F8300380E00030C8C6400188F82003869
-:105F800000002021240600018C45000C0E0002FDBB
-:105F9000000000001600000224020003000010218F
-:105FA0008FBF00148FB0001003E0000827BD001859
-:105FB0008CE8201C2409FFF001092824ACE5201CF2
-:105FC0008F8700380A0003328CE5000C3C02600E1B
-:105FD0000080402134460100240900180000000020
-:105FE00000000000000000003C0A00503C0380005C
-:105FF00035470200AC68003834640400AC65003CEE
-:10600000AC6700308C6C0000318B00201160FFFD0C
-:106010002407FFFF2403007F8C8D00002463FFFF13
-:1060200024840004ACCD00001467FFFB24C60004E8
-:1060300000000000000000000000000024A4020096
-:106040000085282B3C0300203C0E80002529FFFF03
-:1060500001054021ADC300301520FFE0008028215C
-:1060600003E00008000000008F82003827BDFFD841
-:10607000AFB3001CAFBF0020AFB20018AFB1001427
-:10608000AFB0001094460002008098218C52001896
-:106090002CC300818C4800048C4700088C51000CF4
-:1060A0008C490010106000078C4A00142CC40004B6
-:1060B0001480001330EB000730C5000310A000105F
-:1060C000000000002410008B020020210220282163
-:1060D0000E0002FD240600031660000224020003E5
-:1060E000000010218FBF00208FB3001C8FB200185A
-:1060F0008FB100148FB0001003E0000827BD002806
-:106100001560FFF12410008B3C0C80003C03002044
-:10611000241F0001AD830030AF9F0030000000005D
-:1061200000000000000000002419FFF024D8000F38
-:10613000031978243C1000D0AD88003801F0702598
-:1061400024CD00033C08600EAD87003C358504007B
-:10615000AD8E0030000D38823504003C3C038000D9
-:106160008C6B0000316200201040FFFD0000000039
-:1061700010E0000824E3FFFF2407FFFF8CA80000C5
-:106180002463FFFF24A50004AC8800001467FFFB14
-:10619000248400043C04600EAC860038000000003B
-:1061A00000000000000000003C0700203C068000CA
-:1061B0000120202101402821ACC700300E000342FD
-:1061C000000080210E00030C024020210A000382FF
-:1061D0000200202127BDFFE0AFB200183092FFFF80
-:1061E000AFB10014AFBF001CAFB000101640000DDF
-:1061F000000088210A0003F1022010212405000379
-:10620000508500278CE5000C0000000D262C0001B5
-:106210003191FFFF24EB00200232502B1140001976
-:10622000AF8B00388F820030144000168F87003803
-:106230003C0670003C0320008CE5000000A62024F2
-:10624000148300108F840040000544023C09800044
-:1062500000A980241480FFE9310600FF2CCA000B3E
-:106260001140FFEB262C0001000668803C0E080060
-:1062700025CE51C801AE60218D8B00000160000861
-:1062800000000000022010218FBF001C8FB20018F8
-:106290008FB100148FB0001003E0000827BD00206C
-:1062A0000E0002FD240400841600FFD88F870038FA
-:1062B0000A0003D2AF800040020028210E00032410
-:1062C000240400018F8700380A0003D2AF82004007
-:1062D000020028210E000324000020210A000401EE
-:1062E0008F8700380E000369020020218F87003855
-:1062F0000A0003D2AF82004030AFFFFF000F19C089
-:106300003C0480008C9001B80600FFFE3C1920047C
-:106310003C181000AC830180AC800184AC990188EA
-:10632000AC9801B80A0003D3262C000190E20002C9
-:1063300090FF00030000202100023A0000FF282502
-:10634000240600080E0002FD000000001600FFDD1C
-:10635000240200038F870038000010210A0003D2B6
-:10636000AF82004090E50002000020210A000420D6
-:106370002406000994E5000490E9000390E300027C
-:10638000000534000009420000C8202500832825AC
-:106390002406000A0A0004200000202190E50002E3
-:1063A000000020210A0004202406000B000449C23A
-:1063B0003127003F000443423C0280000008204097
-:1063C000240316802CE60020AC43002C24EAFFE0D6
-:1063D0002482000114C0000330A900FF00801021B6
-:1063E000314700FF000260803C0D8000240A00015C
-:1063F000018D20213C0B000E00EA2804008B302187
-:1064000011200005000538278CCE000001C5382575
-:1064100003E00008ACC700008CD800000307782414
-:1064200003E00008ACCF000027BDFFE0AFB10014CF
-:10643000AFB00010AFBF00183C0760008CE4080844
-:106440003402F0003C1160003083F000240501C0EC
-:106450003C04800E00003021106200062410000170
-:106460008CEA08083149F0003928E0000008382B90
-:10647000000780403C0D0200AE2D0814240C16804D
-:106480003C0B80008E2744000E000E34AD6C002CB7
-:10649000120000043C0216912405000112050010B0
-:1064A0003C023D6C345800E0AE3844083C11080012
-:1064B0008E31007C8FBF00183C06600000118540C3
-:1064C000360F16808FB100148FB000103C0E020002
-:1064D00027BD0020ACCF442003E00008ACCE08105C
-:1064E0003C0218DA345800E0AE3844083C11080089
-:1064F0008E31007C8FBF00183C0660000011854083
-:10650000360F16808FB100148FB000103C0E0200C1
-:1065100027BD0020ACCF442003E00008ACCE08101B
-:106520000A00043A240500010A00043A0000282168
-:1065300024020400A7820010A78000080000202188
-:106540003C06080024C654B02405FFFF248900013E
-:10655000000440803124FFFF010618212C87002011
-:1065600014E0FFFAAC65000024040400A7840012C4
-:10657000A780000A000020213C06080024C65530F0
-:106580002405FFFF248D00010004608031A4FFFF7B
-:10659000018658212C8A00201540FFFAAD650000C5
-:1065A000A7800014A780000CA780000E0000202107
-:1065B0003C06080024C655B02405FFFF24990001BD
-:1065C0000004C0803324FFFF030678212C8E0004D2
-:1065D00015C0FFFAADE500003C0560008CA73D004A
-:1065E0002403E08F00E310243446014003E0000858
-:1065F000ACA63D002487007F000731C224C5FFFF01
-:10660000000518C2246400013082FFFF000238C078
-:10661000A784001C3C010800AC270030AF800018A4
-:1066200000002821000020210000302124890001E1
-:1066300000A728213124FFFF2CA817011100000317
-:106640002C8300801460FFF924C6000100C02821BB
-:10665000AF86001810C0001DA786001624CAFFFFD1
-:10666000000A11423C080800250855B01040000AF5
-:1066700000002021004030212407FFFF248E00016C
-:106680000004688031C4FFFF01A860210086582BF8
-:106690001560FFFAAD87000030A2001F50400008CF
-:1066A00000043080240300010043C804000410806B
-:1066B000004878212738FFFF03E00008ADF800000C
-:1066C00000C820212405FFFFAC85000003E000087E
-:1066D0000000000030A5FFFF30C6FFFF30A8001FFC
-:1066E0000080602130E700FF0005294200005021B2
-:1066F00010C0001D24090001240B00012518000111
-:10670000010B2004330800FF01267826390E0020F3
-:106710002DED00012DC2000101A218251060000D11
-:10672000014450250005C880032C40210100182198
-:1067300010E0000F000A20278D040000008A1825B1
-:10674000AD03000024AD00010000402100005021F5
-:1067500031A5FFFF252E000131C9FFFF00C9102B15
-:106760001040FFE72518000103E0000800000000CA
-:106770008D0A0000014440240A000520AC68000096
-:1067800027BDFFE830A5FFFF30C6FFFFAFB0001008
-:10679000AFBF001430E7FFFF000050213410FFFFAF
-:1067A0000000602124AF001F00C048212418000110
-:1067B0002419002005E0001601E010210002F94331
-:1067C000019F682A0009702B01AE402411000017B8
-:1067D000000C18800064102110E000058C4B0000B4
-:1067E00000F84004000838230167582400003821CD
-:1067F0001540004100004021556000163169FFFF3F
-:10680000258B0001316CFFFF05E1FFEC01E0102159
-:1068100024A2003E0002F943019F682A0009702B60
-:1068200001AE40241500FFEB000C18801546000552
-:106830003402FFFF020028210E0005040000382169
-:10684000020010218FBF00148FB0001003E0000879
-:1068500027BD00181520000301601821000B1C0241
-:1068600024080010306A00FF15400005306E000F4C
-:10687000250D000800031A0231A800FF306E000F3A
-:1068800015C00005307F0003251000040003190225
-:10689000320800FF307F000317E00005386900016F
-:1068A0002502000200031882304800FF3869000109
-:1068B0003123000110600004310300FF250A0001AC
-:1068C000314800FF310300FF000C694001A3402163
-:1068D000240A000110CAFFD53110FFFF246E000109
-:1068E00031C800FF1119FFC638C900012D1F002053
-:1068F00053E0001C258B0001240D00010A000597C0
-:10690000240E002051460017258B000125090001A7
-:10691000312800FF2D09002051200012258B000195
-:1069200025430001010D5004014B102425090001ED
-:106930001440FFF4306AFFFF3127FFFF10EE000C18
-:106940002582FFFF304CFFFF000050213410FFFF75
-:10695000312800FF2D0900205520FFF225430001BA
-:10696000258B0001014648260A000551316CFFFFC6
-:1069700000003821000050210A0005A33410FFFF59
-:1069800027BDFFD8AFB0001030F0FFFFAFB100144B
-:10699000001039423211FFE000071080AFB3001C35
-:1069A00000B1282330D3FFFFAFB2001830A5FFFF9E
-:1069B000008090210260302100442021AFBF0020E0
-:1069C0000E00052F3207001F022288213403FFFF2B
-:1069D00002402021020028210260302100003821DD
-:1069E000104300093231FFFF022010218FBF002029
-:1069F0008FB3001C8FB200188FB100148FB000103D
-:106A000003E0000827BD00280E00052F000000004D
-:106A100000408821022010218FBF00208FB3001C6E
-:106A20008FB200188FB100148FB0001003E000087F
-:106A300027BD0028000424003C036000AC603D0832
-:106A400010A00002348210063482101603E0000801
-:106A5000AC623D0427BDFFE0AFB00010309000FFF6
-:106A60002E020006AFBF001810400008AFB100149E
-:106A7000001030803C030800246351F400C3282137
-:106A80008CA400000080000800000000000020210D
-:106A90008FBF00188FB100148FB00010008010213C
-:106AA00003E0000827BD0020979100161620005132
-:106AB000000020213C020800904200330A00060A30
-:106AC00000000000978D001215A000310000202169
-:106AD0000A00060A240200089787001014E0001A32
-:106AE0000000182100602021240200011080FFE92D
-:106AF0008FBF0018000429C20045302100A6582B82
-:106B00001160FFE43C0880003C072000000569C0DC
-:106B100001A76025AD0C00203C0380082402001F63
-:106B20002442FFFFAC6000000441FFFD2463000429
-:106B300024A5000100A6702B15C0FFF5000569C053
-:106B40000A0005F48FBF0018978700083C0408006E
-:106B5000248454B0240504000E0005AF240600016F
-:106B6000978B001024440001308AFFFF2569FFFF46
-:106B70002D4804000040282115000040A78900107E
-:106B800024AC3800000C19C00A000608A7800008D1
-:106B90009787000A3C04080024845530240504002B
-:106BA0000E0005AF2406000197990012244400014D
-:106BB0003098FFFF272FFFFF2F0E04000040882191
-:106BC00015C0002CA78F0012A780000A3A0200030C
-:106BD000262401003084FFFF0E0005DC2C45000157
-:106BE0000011F8C027F00100001021C00A00060AB9
-:106BF000240200089785001A9787000E3C040800BD
-:106C0000248455B00E0005AF2406000197870016B6
-:106C10008F8900182445000130A8FFFF24E3FFFFFF
-:106C20000109302B0040802114C00018A7830016F2
-:106C3000A780000E9785001C0E000E1E020020216A
-:106C4000244A05003144FFFF0E0005DC2405000145
-:106C50003C05080094A500320E000E1E0200202103
-:106C6000244521003C020800904200330A00060A35
-:106C7000000521C00A000642A784000A24AC38009F
-:106C8000000C19C00A000608A78400080A00065C68
-:106C9000A785000E308400FF27BDFFE82C82000688
-:106CA000AFBF0014AFB000101040001500A0382195
-:106CB000000440803C0308002463520C0103282197
-:106CC0008CA40000008000080000000024CC007F9D
-:106CD000000751C2000C59C23170FFFF2547C400A4
-:106CE00030E5FFFF27840008020030210E00050474
-:106CF000240700019786001402062021A7840014AF
-:106D00008FBF00148FB0001003E0000827BD0018EB
-:106D10003C0508008CA50030000779C20E0002E691
-:106D200025E4DF003045FFFF3C040800248455B013
-:106D3000240600010E00050424070001978E0016AA
-:106D40008FBF00148FB0001025CD000127BD0018A3
-:106D500003E00008A78D00160007C9C22738FF000E
-:106D6000001878C231F0FFFF3C040800248455303D
-:106D700002002821240600010E000504240700015A
-:106D8000978D0012260E0100000E840025AC000134
-:106D90003C0B6000A78C0012AD603D083604000675
-:106DA000000030213C0760008CE23D04305F0006AB
-:106DB00017E0FFFD24C9000100061B00312600FF7B
-:106DC000006440252CC50004ACE83D0414A0FFF687
-:106DD0008FBF00148FB0001003E0000827BD00181B
-:106DE000000751C22549C8002406000124070001FC
-:106DF0003C040800248454B00E0005043125FFFF34
-:106E0000978700108FBF00148FB0001024E6000198
-:106E100027BD001803E00008A78600103084FFFF9C
-:106E200030A5FFFF3C0680008CC201B80440FFFE85
-:106E30003C084080008838253C031000ACC001802D
-:106E4000ACC50184ACC7018803E00008ACC301B83D
-:106E50003084FFFF3C0680008CC201B80440FFFE76
-:106E60003C0840388CA70000008828253C0310000F
-:106E7000ACC70180ACC5018803E00008ACC301B811
-:106E80008F8300588F8600501066000B00804021D1
-:106E90003C07080024E755C0000328C000A71021C4
-:106EA0008C44000024630001108800053063000F4B
-:106EB0005466FFFA000328C003E000080000102118
-:106EC0003C07080024E755C400A7302103E0000870
-:106ED0008CC200003C039000346200010082202537
-:106EE0003C038000AC6400208C65002004A0FFFE01
-:106EF0000000000003E00008000000003C028000E9
-:106F0000344300010083202503E00008AC44002046
-:106F100027BDFFE0AFB100143091FFFFAFB000100C
-:106F2000AFBF00181220001200A080218CA5000025
-:106F300014A00011240400023C0680008CC201B899
-:106F40000440FFFE3C074000022720258FBF0018A9
-:106F50008FB100148FB000103C03100027BD00203B
-:106F6000ACC50180ACC4018803E00008ACC301B823
-:106F70000A00071D8CA500000E00067424060200FE
-:106F8000000028210A00071DAE0000003087FFFF27
-:106F90003C0680008CC201B80440FFFE3C0A40065B
-:106FA0008CA9000000EA4025ACC901808CA4000433
-:106FB0003C031000ACC40184ACC8018803E00008A5
-:106FC000ACC301B88F83FD9427BDFFE8AFBF0014A9
-:106FD000AFB00010906700080080102100802821C9
-:106FE00030E600400000202110C000088C50000056
-:106FF0000E00008802002021020020218FBF001413
-:107000008FB000100A00049727BD00180E00073249
-:10701000000000000E000088020020210200202154
-:107020008FBF00148FB000100A00049727BD00180E
-:1070300027BDFFE0AFB000108F90FD94AFBF001CE4
-:10704000AFB20018AFB10014920600010080882191
-:107050000E00070430D2000492040005001129C27A
-:10706000A605000034830040A20300050E00070EB1
-:10707000022020210E000499022020212402000178
-:10708000AE02000C02202821A602001024040002F7
-:10709000A602001224060200A60200140E000674C6
-:1070A000A60200161640000F8FBF001C978C0054DC
-:1070B0003C0B08008D6B00782588FFFF3109FFFF2E
-:1070C000256A0001012A382B10E00006A788005429
-:1070D0003C0F6006240E001635ED0010ADAE0050DA
-:1070E0008FBF001C8FB200188FB100148FB000103A
-:1070F00003E0000827BD002027BDFFE0AFB100146A
-:10710000AFBF0018AFB000101080000400A08821AD
-:107110002402008010820007000000000000000D23
-:107120008FBF00188FB100148FB0001003E000086B
-:1071300027BD00200E00070400A020218F86FD94AB
-:107140000220202190C500050E00070E30B000FF80
-:107150002403003E1603FFF1000000003C05800000
-:107160008CA401780480FFFE240800073C0710006F
-:10717000ACB1014002202021A0A801448FBF00181B
-:107180008FB100148FB00010ACA701780A00075B24
-:1071900027BD002027BDFFE0AFB00010AFBF001833
-:1071A000AFB100143C1080008E11002000000000E0
-:1071B0000E000499AE040020AE1100208FBF00180D
-:1071C0008FB100148FB0001003E0000827BD00202D
-:1071D0003084FFFF3C0680008CC201B80440FFFEF3
-:1071E0003C084035008838253C031000ACC50180C0
-:1071F000ACC00184ACC7018803E00008ACC301B88F
-:107200003084FFFF3C0680008CC201B80440FFFEC2
-:107210003C084036008838253C031000ACC501808E
-:10722000ACC00184ACC7018803E00008ACC301B85E
-:1072300027BDFFD0AFB500243095FFFFAFB60028C3
-:10724000AFB40020AFBF002CAFB3001CAFB200182A
-:10725000AFB10014AFB0001030B6FFFF12A000278E
-:107260000000A0218F9200388E4300003C06800071
-:107270002402004000033E0200032C0230E4007FA1
-:10728000006698241482001D30A500FF8F830048FB
-:107290002C68000A510000108F86003000035880CF
-:1072A0003C0C0800258C5228016C50218D490000AF
-:1072B000012000080000000002D4702131C5FFFF4A
-:1072C0000E0006D624040084166000028F92003857
-:1072D000AF8000488F860030264F002026890001AD
-:1072E00001E090213134FFFF14C00004AF8F00385B
-:1072F0000295282B14A0FFDC000000000280102162
-:107300008FBF002C8FB600288FB500248FB40020CB
-:107310008FB3001C8FB200188FB100148FB0001013
-:1073200003E0000827BD00302407003414A70146FD
-:10733000000000009247000E8F98FD988F90FD94FA
-:10734000240F1600A30700199244000D3C0880008A
-:107350003C07800CA3040018965F00123C096000F3
-:107360003C117FFFA61F005C965900103622FFFFDC
-:10737000240400053325FFFFAE0500548E46001C93
-:10738000AD0F00288CEE00008D2D444801C6182654
-:1073900001A33021AE0600388E0C003824CA00014B
-:1073A0003C0D7F00AE0C003C8E0B003CAF0B00048C
-:1073B000AE0A00208E130020AE13001CA300001B99
-:1073C000AE02002CA30400128E5F001424130050A0
-:1073D000AE1F00348E190034AF1900148E4500180A
-:1073E000AE050048924F000CA20F004E9209000813
-:1073F000352E0020A20E00088E030018006D6024B8
-:10740000358B4000AE0B0018920A0000315200FF8D
-:10741000125302A62413FF803C0408002484564023
-:107420000E00074000000000240C000424080001A6
-:107430003C0508008CA556403C048000A20C0025A9
-:10744000A20800058C9001780600FFFE8F9200389C
-:10745000240D00023C031000AC850140A08D0144C6
-:10746000AC8301780A000804AF8000482CAD0037D7
-:1074700011A0FF998F860030000580803C11080024
-:1074800026315250021178218DEE000001C0000813
-:10749000000000002410000414B0008E3C0780009F
-:1074A0003C0B08008D6B56408F86FD94ACEB0020A2
-:1074B0008E4300088F8FFD98240E0050ACC300301F
-:1074C0008E4A0008ACCA00508E42000CACC2003498
-:1074D0008E440010ACC400388E5F0010ACDF005446
-:1074E0008E590014ACD9003C8E580018ADF8000439
-:1074F0008E51001CACD1002090C5000030A900FFC7
-:10750000112E0276000000008CC500348CD10030B2
-:1075100000B1302304C000F32404008C126000F09A
-:10752000240200030A000804AF820048240F00056B
-:1075300014AF00683C0B80003C0308008C6356408D
-:107540008F86FD94AD6300208E4A00048F99FD98CC
-:1075500024072000ACCA001C924200082412000834
-:10756000A32200198F840038909F0009A33F0018C0
-:107570008F85003890B8000A330400FF1092001085
-:10758000288C0009158000BC24080002240E00206D
-:10759000108E000B34078000288900211520000878
-:1075A0002407400024110040109100053C07000111
-:1075B000240F0080108F00023C07000224074000C7
-:1075C0008CDF00183C04FF0003E4C8240327C02517
-:1075D000ACD8001890B2000BA0D200278F830038DF
-:1075E0009465000C10A0022A000000009467000CB3
-:1075F0003C198000240BFFBFA4C7005C9062000E02
-:1076000024070004A0C200088F840038909F000F58
-:10761000A0DF00098F8C00388D9200108F38007425
-:1076200002582823ACC500588D8F0014ACCF002C15
-:10763000959100183229FFFFACC90040958E001AC1
-:1076400031D0FFFFACD000448D8D001CACCD004884
-:1076500095880002A4C800789183000EA0C300089A
-:1076600090CA0008014B1024126001D4A0C2000887
-:107670008F9200380A000804AF87004824060006ED
-:1076800014A600143C0D80003C1008008E105640DB
-:107690008F8CFD90ADB000208E4800188F86FD9431
-:1076A0008F8AFD98AD8800008CC300382404000543
-:1076B000AD8300048CCB003C12600081AD4B000018
-:1076C0000A000804AF840048240E000710AE004BE7
-:1076D000240400063C05080024A556400E000713AC
-:1076E000240400818F9200380013102B0A00080434
-:1076F000AF8200482419002314B9FFF63C0B800028
-:107700003C0C08008D8C56408F8AFD98AD6C002093
-:107710008F91FD948E4600042544002026450014D8
-:10772000AE260028240600030E000E2A2550003045
-:107730008F87003802002021240600030E000E2A45
-:1077400024E500083C040800248456400E0007404D
-:107750000000000092220000241F0050304400FF6F
-:10776000549FFFE18F9200380E000E1500000000BC
-:107770000A0009098F9200382403003314A3003251
-:107780003C0280003C1108008E3156408F8EFD98DF
-:10779000AC5100208E440008240900288F88FD94F5
-:1077A000ADC400308E5F000C24060009ADDF00344C
-:1077B0008E590010ADD900388E580014ADD8002075
-:1077C0008E450018ADC500248E4F001CADCF00289B
-:1077D000A1C900118E4D000412600031AD0D0028CA
-:1077E0008F9200380A000804AF860048240900225E
-:1077F00014A9FFB800000000240400073C0F080093
-:107800008DEF56403C118000AE2F00205660FEB137
-:10781000AF8400483C040800248456400E00074012
-:10782000241300508F98FD9493120000324500FFFE
-:1078300010B30169000000008F9200380000202181
-:107840000A000804AF8400483C05080024A55640FF
-:107850000E0006E3240400810A0009098F92003813
-:1078600002D498213265FFFF0E0006D6240400845E
-:107870000A0008048F9200381088FF512407040082
-:107880002887000310E001A324100004240D000148
-:10789000548DFF4B240740000A0008BF2407010055
-:1078A0003C05080024A556400E000732240400823F
-:1078B0008F920038000030210A000804AF8600488B
-:1078C0003C040800248456408CC200380E00074057
-:1078D0008CC3003C8F9200380A00095F0000202111
-:1078E000240400823C05080024A556400E000732FF
-:1078F000000000008F920038000010210A000804E8
-:10790000AF8200488E5000048F91FD943C0A8000A5
-:10791000AD500020922200050200282130460002CE
-:1079200014C001802404008A8F92FD98020028214F
-:107930002404008D924B001B3163002014600179F8
-:1079400000000000922D0009240C001231A800FF55
-:10795000110C0174240400810E0007040200202190
-:107960009245001B240E00040200202134A900428D
-:10797000A249001B0E00070EA22E00253C04800029
-:107980008C9101780620FFFE24180002AC90014083
-:10799000A09801448F9200383C0F1000AC8F017802
-:1079A0000A00090A0013102B8E5000048F91FD94D9
-:1079B0003C1F8000AFF00020923900050200282112
-:1079C0003327000214E000172404008A92240009DF
-:1079D0002412000402002821308600FF10D200117A
-:1079E000240400810E000704020020218F8CFD98E2
-:1079F000240B00122403FFFE918D001B02002021A6
-:107A000035A80020A188001BA22B0009922A00059E
-:107A1000014310240E00070EA222000502002821B7
-:107A2000000020210E0007CF000000000A00090915
-:107A30008F9200388E5100043C0280003C100800F8
-:107A400026105640AC5100203C010800AC31564095
-:107A50009246000330C40004108001658F84FD94B9
-:107A600024020006A0820009924D001B2408FFC0DA
-:107A700031AC003F01885825A08B000892430003D9
-:107A8000306A00011540015C000000008E420008D1
-:107A9000AE0200083C0208008C4256481040015BD0
-:107AA0008F8EFD98000281C28F85FD94A5D0000CB9
-:107AB0008E5F000C240F000124090014ADDF002CA0
-:107AC0008E590010ADD9001C96470016A5C7003C82
-:107AD00096580014A5D8003EACAF000CA4AF00101F
-:107AE000A4AF0012A4AF0014A4AF00161260015F8F
-:107AF000A1C9001192440003309200022E530001EC
-:107B00008F920038266200080A000804AF820048FD
-:107B10008E4600043C0580003C048008ACA6002092
-:107B20008E4700089089000024110050312200FF88
-:107B3000105100B8240500883C0480008C8F01B8E7
-:107B400005E0FFFE0013802B3C18400900B810250B
-:107B5000AF9000483C101000AC860180AC870184D7
-:107B6000AC820188AC9001B80A0008058F8600300D
-:107B70008E4500043C0680003C098008ACC500200E
-:107B8000913F00002404005033F900FF132400B09B
-:107B9000240600883C0480008C8A01B80540FFFE62
-:107BA0003C0E400E00CE68253C081000AC850180DC
-:107BB000AC800184AC8D0188AC8801B8912B0000A9
-:107BC000240CFF8024040004016C182524060030D6
-:107BD0000E000674A12300000A0009098F920038E4
-:107BE0008E5000048F91FD983C0F8000ADF0002076
-:107BF0009225001B30A900101120007C2403008175
-:107C00003C0480008C8701B804E0FFFE3C1F401F4D
-:107C1000AC900180007F10250013C82B3C10100091
-:107C2000AC800184AF990048AC820188AC9001B867
-:107C30000A0008058F8600308E44001C0E0006EFF7
-:107C400000000000104000F8004038218F920038FA
-:107C5000240600893C0580008CAE01B805C0FFFEFB
-:107C600000000000ACA701808E50001C3C114001B8
-:107C70000013782B00D138253C131000ACB00184E0
-:107C8000AF8F0048ACA70188ACB301B80A00080563
-:107C90008F860030965900023C100800261056408E
-:107CA00033380004130000A33C0460008E5F001C06
-:107CB0003C068000ACDF00203C010800AC3F564091
-:107CC000964F000231E7000114E000E300000000DD
-:107CD0008E420004AE0200083C1008008E10564888
-:107CE000120000D93C0680008F85FD94241000010D
-:107CF0008CBF00188F91FD988F89FD9003E6C825F1
-:107D0000ACB90018A0A00005ACB0000C3C180800ED
-:107D10008F1856488F870038A4B00010001879C219
-:107D2000A4B00012A4B00014A4B00016A62F000C3A
-:107D30008CEE00088F8D00388F8C0038AE2E002C12
-:107D40008DA8000C24070002AE28001C918B0010A7
-:107D5000A22B00118F830038906A0011A12A00081D
-:107D60008F82003890440012A0A4004E8F920038F9
-:107D700092460013A22600128F920038965F0014DC
-:107D8000A63F003C96590016A639003E8E580018B2
-:107D9000AE3800145660FD4FAF8700483C05080020
-:107DA00024A556400E000713000020218F920038B2
-:107DB000000038210A000804AF8700483C0508008D
-:107DC00024A556400E000732240400828F9200380A
-:107DD0000A0008EC000038210E000E15000000001B
-:107DE0008F9200380A00095F000020210E0007046E
-:107DF000020020219232001B020020213658001080
-:107E00000E00070EA238001B8F9200380A000A4F9E
-:107E1000000018219243000C306A00011140000359
-:107E200000000000964B000EA48B002C9248000C22
-:107E3000310C00021180FF4000002821964E0012F4
-:107E40008E4D0014A48E001A0A000A1DAC8D001C71
-:107E50008F8300588F8700501067FF4E000030213D
-:107E60003C080800250855C4000320C000883021C4
-:107E70008CD10000122500C8246200013043000F9D
-:107E80001467FFFA000320C00A000A340000302102
-:107E90003C05080024A556400E0007322404008B40
-:107EA0008F9200380A0008EC0013382B3C0B0800B6
-:107EB0008D6B564024D8FFFE25710100322A007FC9
-:107EC0000147902102331024AD020028AE4600D0B5
-:107ED000AE4000D40A000855AE58001CACC0005497
-:107EE0003C0E08008DCE56403C09800C352C01001C
-:107EF000ACEE00288E500014AD9000D08E4D0014D2
-:107F0000AD8D00D48E4800102507FFFE0A000891B1
-:107F1000AD87001C5490FDAA240740000A0008BF4A
-:107F2000240710000E0007C3000000000A00090922
-:107F30008F9200388C83442C3C05DEAD34B2BEEF0A
-:107F40003C010800AC205640107200900000000078
-:107F50003C046C62348279701462000824040002CC
-:107F6000978A00549783004C020028210143482B34
-:107F70001120001924040092240400020E0005E4DC
-:107F8000240502003C0B8000AD6200203C0108008B
-:107F9000AC2256401040000D8F8E0038240C002873
-:107FA0002404000391CD001031A800FF550C0001FE
-:107FB000240400010E00004C0000000010400004EA
-:107FC000240400830A000A7F8F920038240400836F
-:107FD0003C05080024A556400E00071300000000D1
-:107FE0008F9200380013382B0A000804AF8700482E
-:107FF0000A0009E8240200128E4400080E0006EF71
-:10800000000000000A0009F4AE0200083C05080068
-:1080100024A556400E0006E3240400878F92003802
-:108020000A000A110013102B240400040E0005E4BA
-:108030002405003014400014004038218F9200388D
-:108040000A000A64240600833C05080024A5564063
-:108050000A000B45240400878E4400040E0006EF3E
-:10806000000000000A000A85AE0200083C05080076
-:1080700024A556400E000732240400828F92003857
-:108080000A000A11000010218F9200383C08800875
-:108090003C0C8000240B0050240A0001AD8200201B
-:1080A000A10B0000A10A000192490004A1090018D7
-:1080B00092440005A1040019924300063C04080004
-:1080C000248455C4A103001A924200073C0308000F
-:1080D000246355C0A102001B92450008A105001CA5
-:1080E00092460009A106001D925F000AA11F001E12
-:1080F0009259000BA119001F9258000CA1180020E2
-:108100009251000DA11100219250000EA1100022E9
-:10811000924F000FA10F0023924E0010A10E0024D9
-:10812000924D0011A10D0025964C0014A50C0028BD
-:10813000964B00168F8A00508F980058A50B002A86
-:1081400096490018000A10C025450001A509002C19
-:108150008E46001C0044C8210043F82130A5000FC2
-:10816000AFE60000AF27000010B80003AF85005055
-:108170000A000A640000302124AD000131A8000F7C
-:10818000000030210A000A64AF8800588C83442C18
-:108190000A000B243C046C623C07080024E755C02D
-:1081A00000879021ACC00000000030210A000A3492
-:1081B000AE4000003C0482013C03600034820E02A9
-:1081C000AC603D68AF80007803E00008AC623D6CB5
-:1081D00027BDFFE8AFB000103090FFFF001018423D
-:1081E0002C620041AFBF0014144000022404008040
-:1081F000240300403C010800AC3000603C01080052
-:10820000AC2300640E000E1E00602821244802BF2B
-:108210002409FF8001092824001039800010304013
-:108220008FBF00148FB0001000A7202100861821F6
-:10823000AF8300603C010800AC2500583C010800F9
-:10824000AC24005C03E0000827BD0018308300FF69
-:1082500030C6FFFF30E400FF3C0880008D0201B80B
-:108260000440FFFE00035400014438253C0960002F
-:1082700000E920253C031000AD050180AD06018416
-:10828000AD04018803E00008AD0301B88F86003813
-:108290003C096012352700108CCB00043C0C600EAA
-:1082A00035850010316A00062D480001ACE800C495
-:1082B0008CC40004ACA431808CC2000894C30002BA
-:1082C000ACA2318403E00008A78300708F850038DA
-:1082D0008F87FF208F86FF288CAE00043C0F601232
-:1082E00035E80010ACEE00688CAD0008ACED006C19
-:1082F0008CAC0010ACCC004C8CAB000CACCB004870
-:1083000094CA00543C0208008C42004425490001F4
-:10831000A4C9005494C400543083FFFF10620017B6
-:10832000000000003C0208008C420040A4C2005241
-:108330008CA30018ACE300308CA20014ACE2002C3B
-:108340008CB90018ACF900388CB800142405000171
-:10835000ACF800348D0600BC50C500198D0200B485
-:108360008D0200B8A4E2004894E40048A4E4004A66
-:1083700094E800DA03E000083102FFFF3C02080045
-:108380008C420024A4C00054A4C200528CA3001844
-:10839000ACE300308CA20014ACE2002C8CB90018C5
-:1083A000ACF900388CB8001424050001ACF8003496
-:1083B0008D0600BC54C5FFEB8D0200B88D0200B4E1
-:1083C000A4E2004894E40048A4E4004A94E800DAF7
-:1083D00003E000083102FFFF8F8600383C04800074
-:1083E0008CC900088CC80008000929C0000839C0E1
-:1083F000AC87002090C30007306200041040003AB0
-:10840000AF85007490CB0007316A00081140003935
-:108410008F87FF248CCD000C8CCE001401AE602B16
-:1084200011800032000000008CC2000CACE2007031
-:108430008CCB00188F85FF208F88FF28ACEB007451
-:108440008CCA00102402FFF8ACAA00C88CC9000C2A
-:10845000AD0900608CC4001CACA400C090E3007C9B
-:108460000062C824A0F9007C90D80007330F0008F0
-:1084700011E000040000000090ED007C35AC00012C
-:10848000A0EC007C90CF000731EE000111C0000984
-:108490000000000090E4007C2418000234820002F6
-:1084A000A0E2007C90A300EC307900FF13380013A9
-:1084B0002408003490C900073126000210C00004CF
-:1084C0000000000090EB007C356A0004A0EA007C0C
-:1084D00090ED007D31AC003FA0EC007D94A700DA68
-:1084E00003E0000830E2FFFF8F87FF240A000C5AE8
-:1084F0008CC200140A000C5BACE000700A000C7C1B
-:10850000ACA800CC8F8C003827BDFFD8AFB3001CBF
-:10851000AFB20018AFB00010AFBF0020AFB1001471
-:10852000918F00153C13600E3673001031EB000F75
-:10853000A38B007C8D8F00048D8B0008959F00120B
-:10854000959900109584001A9598001E958E001C30
-:1085500033EDFFFF332AFFFF3089FFFF3308FFFFB2
-:1085600031C7FFFF3C010800AC2D00243C0108008E
-:10857000AC2900443C010800AC2A0040AE683178C8
-:10858000AE67317C91850015959100163C12601202
-:108590003652001030A200FF3230FFFFAE62318849
-:1085A000AE5000B491830014959F0018240600017A
-:1085B0000066C80433F8FFFFAE5900B8AE5800BCDF
-:1085C000918E0014AF8F00643C08600631CD00FF2F
-:1085D000AE4D00C0918A00159584000E3C07600ADC
-:1085E000314900FFAF8B00683084FFFFAE4900C8FF
-:1085F000351100100E000BC334F004103C020800CB
-:108600008C4200603C0308008C6300643C06080058
-:108610008CC600583C0508008CA5005C8F84006067
-:108620008FBF0020AE23004CAE65319CAE030054DA
-:10863000AE4500DCAE6231A0AE6331A4AE663198C7
-:10864000AE2200488FB3001CAE0200508FB1001460
-:10865000AE4200E0AE4300E4AE4600D88FB000105A
-:108660008FB200180A0004CC27BD0028978500723D
-:108670009783005C27BDFFE8AFB0001000A3102B6C
-:10868000AFBF0014240400058F900038104000553F
-:10869000240900020E0005E48F850060AF8200749B
-:1086A000240400031040004F240900023C0680000F
-:1086B0000E00004CACC2002024070001240820005A
-:1086C0001040004D24040005978E00728F8AFF240D
-:1086D0002409005025C50001A7850072A1490000AA
-:1086E0003C0D08008DAD0064240380008F84FF20C2
-:1086F000000D6600AD4C0018A5400006954B000A21
-:108700008F85FF282402FF8001633024A546000ADC
-:10871000915F000A0000482103E2C825A159000A20
-:10872000A0A00008A140004CA08000C5961800023F
-:10873000978300703C020004A49800DA960F0002B0
-:108740002418FFBF25EE2401A48E00AE8E0D000478
-:10875000ACAD00448E0C0008ACAC0040A4A00050AE
-:10876000A4A000548E0B000C240C0030AC8B00280D
-:108770008E060010AC860024A480003EA487004E24
-:10878000A4870050A483003CAD420074AC8800C8AC
-:10879000ACA80060A08700EC909F00C433F9007F74
-:1087A000A09900C4909000C402187824A08F00C43F
-:1087B000914E007C35CD0001A14D007C938B007C57
-:1087C000AD480070AC8C00CCA08B00C68F880068D0
-:1087D0008F870064AC8800B4AC8700B8A5400078EF
-:1087E000A540007A8FBF00148FB000100120102127
-:1087F00003E0000827BD00188F8500740E00067482
-:108800008F8600600A000D482409000227BDFFE0A2
-:10881000AFB000108F900038AFB10014AFBF001898
-:108820008E0900040E000499000921C08E0800047E
-:108830008F84FF208F82FF28000839C03C0680000B
-:10884000ACC70020948500DA904300131460001C2C
-:1088500030B1FFFF8F8CFF24918B0008316A0040FC
-:108860001540000B000000008E0D00040220302196
-:108870008FBF00188FB100148FB0001024040022A5
-:1088800000003821000D29C00A000BE227BD00209E
-:108890000E000063000000008E0D00040220302155
-:1088A0008FBF00188FB100148FB000102404002275
-:1088B00000003821000D29C00A000BE227BD00206E
-:1088C0000E00005B000000008E0D0004022030212D
-:1088D0008FBF00188FB100148FB000102404002245
-:1088E00000003821000D29C00A000BE227BD00203E
-:1088F00027BDFFE0AFB200183092FFFFAFB000100D
-:10890000AFBF001CAFB100141240001E0000802158
-:108910008F8600388CC500002403000600053F0246
-:108920000005140230E4000714830016304500FFF0
-:108930002CA8000611000040000558803C0C0800DF
-:10894000258C532C016C50218D490000012000081A
-:10895000000000008F8E0078240D000111CD005022
-:1089600024020002AF820078260900013130FFFFA7
-:1089700024C800200212202B010030211480FFE5C2
-:10898000AF880038020010218FBF001C8FB2001882
-:108990008FB100148FB0001003E0000827BD002045
-:1089A0009387005E54E00034000030210E000C90EC
-:1089B000000000008F8600380A000DA82402000184
-:1089C0008F8700782405000210E50031240400138D
-:1089D0000000282100003021240700010E000BE2D6
-:1089E000000000000A000DA98F8600388F830078F0
-:1089F000240200021462FFF6240400120E000C454B
-:108A0000000000008F850074004030212404001213
-:108A10000E000BE2000038210A000DA98F860038F5
-:108A20008F8300782411000310710029241F000295
-:108A3000107FFFCE26090001240400100000282129
-:108A4000000030210A000DC6240700018F91007834
-:108A5000240600021626FFF9240400100E000CEA7A
-:108A600000000000144000238F9800388F860038E3
-:108A70000A000DA824020003240400140E000BE2D7
-:108A8000000028218F8600380A000DA82402000269
-:108A90000E000D52000000000A000DA98F8600385C
-:108AA0000E000BF200000000241900022404001440
-:108AB000000028210000302100003821AF99007803
-:108AC0000E000BE2000000000A000DA98F8600389E
-:108AD0000E000C02000000008F85007424190002B3
-:108AE0000040302124040010000038210A000DFF4E
-:108AF000AF9900780040382124040010970F00023D
-:108B0000000028210E000BE231E6FFFF8F860038BF
-:108B10000A000DA9AF9100788F84FF243C077FFFE6
-:108B200034E6FFFF8C8500182402000100A61824FB
-:108B3000AC83001803E00008A08200053084FFFF2A
-:108B400030A5FFFF108000070000182130820001CF
-:108B50001040000200042042006518211480FFFB31
-:108B60000005284003E000080060102110C0000745
-:108B7000000000008CA2000024C6FFFF24A5000412
-:108B8000AC82000014C0FFFB2484000403E0000852
-:108B90000000000010A0000824A3FFFFAC86000026
-:108BA00000000000000000002402FFFF2463FFFF1C
-:108BB0001462FFFA2484000403E0000800000000AF
-:108BC000000411C003E000082442024027BDFFE872
-:108BD000AFB0001000808021AFBF00140E000E3F28
-:108BE00000A0202100504821240AFF808FBF0014DC
-:108BF0008FB00010012A30243127007F3C08800A02
-:108C00003C04210000E8102100C428253C0380001A
-:108C100027BD0018AC650024AF820024AC400000E2
-:108C2000AC65002403E00008AC4000403C0D0800A7
-:108C30008DAD005800056180240AFF8001A45821F1
-:108C4000016C4821012A30243127007F3C08800C28
-:108C50003C04210000E8102100C428253C038000CA
-:108C6000AC650028AF82002003E00008AC4000247F
-:108C700030A5FFFF3C0680008CC201B80440FFFE17
-:108C80003C08601500A838253C031000ACC40180E6
-:108C9000ACC00184ACC7018803E00008ACC301B8D4
-:108CA0003C0D08008DAD005800056180240AFF804E
-:108CB00001A45821016C4021010A482400093140D7
-:108CC0003107007F00C728253C04200000A4182598
-:108CD0003C028000AC43083003E00008AF80002075
-:108CE00027BDFFE8AFB0001000808021AFBF0014A7
-:108CF0000E000E3F00A0202100504821240BFF80D1
-:108D0000012B5024000A39403128007F3C06200006
-:108D10008FBF00148FB0001000E8282534C2000176
-:108D200000A218253C04800027BD0018AC83083041
-:108D300003E00008AF8000243C0580088CA7006099
-:108D40003C0680080087102B144000112C83400043
-:108D50008CA800602D0340001060000F2403400029
-:108D60008CC900600089282B14A000020080182103
-:108D70008CC3006000035A42000B30803C0A08009C
-:108D8000254A53A000CA202103E000088C8200007D
-:108D90001460FFF32403400000035A42000B3080AC
-:108DA0003C0A0800254A53A000CA202103E000081D
-:108DB0008C8200003C05800890A6000893840088FF
-:108DC00024C20001304200FF3043007F1064000CD9
-:108DD00000023827A0A200083C0480008C8501789E
-:108DE00004A0FFFE8F8A0080240900023C081000C6
-:108DF000AC8A0140A089014403E00008AC880178F6
-:108E00000A000EC430E2008027BDFFD8AFB20018C0
-:108E10008F920084AFBF0020AFB3001CAFB0001032
-:108E2000AFB100148F9300208E5900283C100080B1
-:108E30003C0EFFEFAE7900008E580024A260000ABD
-:108E400035CDFFFFAE7800049251002C3C0BFF9F04
-:108E5000356AFFFFA271000C8E6F000C3C080040C9
-:108E6000A271000B01F06025018D4824012A3824ED
-:108E700000E83025AE66000C8E450004AE60001898
-:108E80003C0400FFAE6500148E43002C3482FFFFCB
-:108E9000A66000080062F824AE7F00108E5900081A
-:108EA0008F900080964E0012AE7900208E51000CFB
-:108EB00031D83FFF00187980AE7100248E4D001428
-:108EC00001F0602131CB0001AE6D00288E4A001800
-:108ED000000C41C2000B4B80AE6A002C8E46001C79
-:108EE00001093821A667001CAE66003096450002D5
-:108EF0008E440020A665001EAE6400349243003309
-:108F00003062000454400006924700003C02800892
-:108F1000344301008C7F00C0AE7F003092470000D8
-:108F20008F860024A0C700309245003330A4000291
-:108F300050800007925100018F880024240BFF808D
-:108F4000910A0030014B4825A109003092510001DF
-:108F50008F900024240CFFBF2404FFDFA2110031F6
-:108F60008F8D00243C1880083711008091AF003CA1
-:108F700031EE007FA1AE003C8F890024912B003C94
-:108F8000016C5024A12A003C8F9F00248E6800149D
-:108F900093E6003C2D0700010007114000C428247F
-:108FA00000A21825A3E3003C8F87002496590012E5
-:108FB000A4F900328E450004922E007C30B00003EC
-:108FC0000010782331ED000300AD102131CC0002F8
-:108FD0001580000224460034244600303C028008FC
-:108FE00034430080907F007C00BFC82433380004E5
-:108FF0001700000224C2000400C010218F98002432
-:1090000024190002ACE20034A3190000924F003F83
-:109010008F8E00243C0C8008358B0080A1CF00018E
-:109020008F910024924D003F8E440004A62D000233
-:10903000956A005C0E000E9D3150FFFF00024B80D0
-:10904000013038253C08420000E82825AE25000400
-:109050008E4400388F850024ACA400188E4600345E
-:10906000ACA6001CACA0000CACA00010A4A0001486
-:10907000A4A00016A4A00020A4A00022ACA000245C
-:109080008E62001450400001240200018FBF0020B6
-:109090008FB3001C8FB200188FB100148FB0001076
-:1090A000ACA200080A000EBC27BD002827BDFFC8DF
-:1090B0003C05800834A40080AFBF0034AFBE003050
-:1090C000AFB7002CAFB60028AFB50024AFB4002076
-:1090D000AFB3001CAFB20018AFB10014AFB00010B6
-:1090E000948300789482007A104300512405FFFF96
-:1090F0000080F0210A000FCC0080B821108B004DB9
-:109100008FBF00348F8600803C1808008F18005CE9
-:109110002411FF803C1680000306782101F1802491
-:10912000AED0002C96EE007A31EC007F3C0D800E24
-:1091300031CB7FFF018D5021000B4840012AA8212F
-:1091400096A400003C0808008D0800582405FF8004
-:1091500030953FFF01061821001539800067C821AE
-:109160000325F8243C02010003E290253338007FF8
-:109170003C11800CAED20028031190219250000DBA
-:10918000320F000411E0003702E0982196E3007AE4
-:1091900096E8007A96E5007A2404800031077FFF84
-:1091A00024E3000130627FFF00A4F82403E2C82515
-:1091B000A6F9007A96E6007A3C1408008E940060C6
-:1091C00030D67FFF12D400C1000000008E58001876
-:1091D0008F84008002A028212713FFFF0E000E7746
-:1091E000AE53002C97D5007897D4007A12950010D2
-:1091F000000028213C098008352401003C0A800831
-:1092000091480008908700C53114007F30E400FFCA
-:109210000284302B14C0FFB9268B0001938E008886
-:10922000268C0001008E682115ACFFB78F86008068
-:109230008FBF00348FBE00308FB7002C8FB6002850
-:109240008FB500248FB400208FB3001C8FB200189C
-:109250008FB100148FB0001000A0102103E00008AF
-:1092600027BD003800C020210E000E4202802821B8
-:109270008E4B00108E4C00308F8400242409000295
-:10928000016C5023AE4A0010A089000096E3005CF8
-:109290008E4400308F9100240E000E9D3070FFFF31
-:1092A00000024380011028253C07420000A710253A
-:1092B000AE2200048E5F00048F8A00248E590000C5
-:1092C000240B0008AD5F001CAD590018AD40000C28
-:1092D000AD4000109246000A240400052408C00096
-:1092E00030D000FFA550001496580008A55800166D
-:1092F0009251000A3C188008322F00FFA54F002031
-:10930000964E000837110100A54E0022AD40002402
-:10931000924D000B31AC00FFA54C0002A14B0001A7
-:109320008E4900308F830024240BFFBFAC690008F6
-:10933000A06400308F9000242403FFDF96070032E2
-:1093400000E8282400B51025A6020032921F003242
-:1093500033F9003F37260040A20600328F8C0024EC
-:10936000AD8000348E2F00C0AD8F0038918E003C50
-:109370003C0F7FFF31CD007FA18D003C8F84002406
-:1093800035EEFFFF908A003C014B4824A089003C49
-:109390008F85002490A8003C01033824A0A7003C3E
-:1093A0008E4200348F9100243C038008AE2200409E
-:1093B0008E59002C8E5F0030033F3023AE260044D0
-:1093C000923000483218007FA23800488F8800246D
-:1093D0008E4D00308D0C004801AE5824019650246B
-:1093E000014B4825AD0900489244000AA104004CF5
-:1093F000964700088F850024A4A7004E8E500030A9
-:109400008E4400300E0002E68C65006092F9007C0C
-:109410000002F940004028210002110003E230213F
-:109420003336000212C00003020680210005B0801E
-:1094300002168021926D007C31B30004126000029C
-:1094400000057080020E80218E4B003024058000C4
-:10945000316A0003000A4823312400030204182162
-:109460008F900024AE03003496E4007A96E8007AE8
-:1094700096F1007A31077FFF24E20001305F7FFF21
-:109480000225C824033F3025A6E6007A96F8007A24
-:109490003C1208008E520060330F7FFF11F200185B
-:1094A000000000008F8400800E000E7702A02821AB
-:1094B0008F8400800E000E87028028210E000EBCD3
-:1094C000000000000A000FC80000000096F1007ABA
-:1094D00002248024A6F0007A92EF007A92EB007AC0
-:1094E00031EE00FF000E69C2000D6027000C51C074
-:1094F0003169007F012A20250A000FC2A2E4007A08
-:1095000096E6007A00C5C024A6F8007A92EF007AA9
-:1095100092F3007A31F200FF001271C2000E682748
-:10952000000DB1C0326C007F01962825A2E5007ABB
-:109530000A0010798F8400803C0380003084FFFF94
-:1095400030A5FFFFAC640018AC65001C03E0000808
-:109550008C62001427BDFFA83C068008AFBE0050F7
-:10956000AFBF0054AFB7004CAFB60048AFB5004432
-:10957000AFB40040AFB3003CAFB20038AFB100347D
-:10958000AFB0003034C80100910500C590C7000895
-:10959000309EFFFF30A500FF30E2007F0045182A13
-:1095A000A7A00014A7A0001E10600053AFA00010D9
-:1095B00090C900083126007F00A620232493FFFFD6
-:1095C0000013802B001E882B0211782451E00084A8
-:1095D0008FB300103C19800897360052973700501F
-:1095E000001EC40002D7A8230015A4000014140311
-:1095F00003C2902A1640000200182C0300402821C4
-:10960000001314000002240300A4F82A57E000010C
-:1096100000A0202128830009146000020080A021FE
-:10962000241400083C0A80088D4500480014498035
-:109630008D48004C3C0380003124FFFF3C060010A5
-:109640000086382534710400AC650038AF91008481
-:10965000AC68003CAC670030000000000000000077
-:1096600000000000000000000000000000000000FA
-:1096700000000000000000008C6C0000318B002016
-:109680001160FFFD0014682A01B010241040003959
-:109690000000A8213C16800892D700083C128000E8
-:1096A0008E44010032F6007F0E000E4202C02821D7
-:1096B0008E2F00108E4401000000902131F73FFFF3
-:1096C0000E000E5A02E02821922E000031C2003F07
-:1096D0002C50000852000010000088210002F88081
-:1096E0003C0308002463535403E3C8218F3800006F
-:1096F000030000080000000090CE0008938B008853
-:1097000031CD007F00AD6023016C50210A0010BFF5
-:109710002553FFFF000088213C1080008E040100CB
-:109720000E000E7702E028218E0401000E000E8745
-:1097300002C028211220000F0013802B8F8A008482
-:1097400026A900010009AC00027298230015AC03A1
-:109750002545004002B4B02A0013802B24170001D5
-:1097600000A0882102D01024AF8500841440FFC9D6
-:10977000AFB700103C07800894F100503C05800012
-:109780003C06002002B1C821A4F90050ACA600306C
-:1097900094F4005094E3005203D560231074001D2C
-:1097A000319EFFFF8CE5004C8CE90048001561807C
-:1097B00000ACB0210000A02102CCA82B0134502124
-:1097C0000155B821ACF6004CACF70048001E882BC0
-:1097D0000211782415E0FF803C1980088FB3001037
-:1097E0008FBF00548FBE00503A6200018FB7004C0B
-:1097F0008FB600488FB500448FB400408FB3003C53
-:109800008FB200388FB100348FB0003003E0000811
-:1098100027BD005894F200548CEF0044325FFFFEE5
-:10982000001FC0C001F87021ACAE003C8CEB0044BE
-:109830008CAD003C016D40231900003B000000008E
-:109840008CE20040244200013C07005034E4001048
-:109850003C038000ACA20038AC6400300000000083
-:1098600000000000000000000000000000000000F8
-:109870000000000000000000000000008C760000E6
-:1098800032D7002012E0FFFD3C11800896280054DA
-:109890003C0A80003C06800831190001001960C0B4
-:1098A000018AA0218E8304003C0708008CE7004455
-:1098B0003C150020ACC300488E8904042405000137
-:1098C000ACC9004C10E50259AD550030963F00522E
-:1098D0003C0508008CA5004000BFC021A6380052FE
-:1098E000962F005425EE0001A62E00549626005413
-:1098F00030C4FFFF5487FF34001E882B30A5FFFFC4
-:109900000E00109DA62000543C0408008C84002406
-:10991000962700520044102300E29023A632005202
-:109920000A0010C1001E882B8CE200400A00116260
-:109930003C07005092280001240700013102007FFB
-:109940001447001C97AC001E8E2A0014240BC00084
-:1099500031443FFF018B48243C0608008CC6006060
-:109960000124282530A43FFF0086882B12200011F7
-:10997000A7A5001E3C1108008E3100588F82008080
-:10998000000441802407FF80022218210068F8218A
-:1099900003E7C82433EF007F3C1880003C12800EA0
-:1099A000AF19002C01F2682191AE000D35D00004F2
-:1099B000A1B0000D0E000ED12412000124110001EF
-:1099C0003C1080008E0401000E000E7702E028217A
-:1099D0008E0401000E000E8702C028211620FF58B9
-:1099E0008F8A00840A00112C0013802B8F8600843C
-:1099F00090C900013125002010A0018A2410000127
-:109A00003C048008348C0080918B007C8F91002076
-:109A100000009021316A00011140000FAFB000201A
-:109A20008CD000148C8E0060020E682B15A00003F1
-:109A3000020038218C8700603C0480083483008059
-:109A40008C72007000F2782B15E0000200E02021FB
-:109A50008C640070008090213C07800834E5008011
-:109A60008CD900148CBF0070033FC02B170000027C
-:109A7000032020218CA400700092182310600003A2
-:109A8000AFA3002824080002AFA800208FA5002063
-:109A90000265102B144000B5000018218CC400385A
-:109AA0008E2F000C3C180080AE2400008CCE0034B9
-:109AB0003C10FF9F01F86025AE2E000490CB003FC4
-:109AC000360DFFFF018D48243C0A00203C06FFEFC5
-:109AD000A22B000B012A382534C5FFFF00E54024E6
-:109AE0003C0200088F87008401022025AE24000C70
-:109AF0008CE30014AE2000188FAF0028AE230014B2
-:109B00008CF800183C1FFFFB37F9FFFFAE38001C34
-:109B10008CEE000800996824024F8021AE2E0024AC
-:109B20008CEC000CAE2D000CA6200038A620003ACC
-:109B3000AE30002CAE2C0020AE2000288CEB0014A0
-:109B40008FAA002801724823012A302310C0001177
-:109B5000AE26001090F0003D8E2C00048E2A0000EE
-:109B600000106900018D28210000102100AD302B6C
-:109B70000142482101264021AE250004AE28000004
-:109B800090E3003DA223000A8F9F008497F900060E
-:109B9000A63900088F8A0024240200023C068008AF
-:109BA000A142000034C900809525005C02402021BC
-:109BB0008F90002430A8FFFF0E000E9DAFA8002458
-:109BC0008FA300240002FB808F8500843C044200A8
-:109BD00003E3C8250324C025AE1800048F840024A5
-:109BE0008CAF0038AC8F00188CAE0034AC8E001CEB
-:109BF000AC80000CAC800010A4800014A48000167F
-:109C0000A4800020A4800022AC80002490A7003F04
-:109C1000A48700025240018C240700018FAB00286A
-:109C20005160000290A2003D90A2003E244C000131
-:109C3000A08C00018F840024AC9200083C1880089E
-:109C400037100080920F007C31EE000215C0000238
-:109C500024070034240700308F8500843C088008E6
-:109C60003509008090A300009128007C3259000340
-:109C7000A08300308F9F00848F9000242404000470
-:109C800093F8000100997823240DC000A218003138
-:109C90008F9900248F8E008431E50003972C0032C9
-:109CA00095CB001200F24821018D502431623FFF14
-:109CB00001423025A72600329323003201253821A6
-:109CC00031080004307F003F37E40040A324003215
-:109CD000124000028F85002400E838213C0C8008E7
-:109CE000ACA70034358B01008D6200C02E4400010A
-:109CF0002403FFDFACA2003890AA003C0004C94056
-:109D00003146007FA0A6003C8F8900242405FFBFB8
-:109D10009127003C00E54024A128003C8F8F0024BF
-:109D200091FF003C03E3C02403198025A1F0003C0F
-:109D30008F8B00848F8A00248D6E0020AD4E0040F2
-:109D40008D6D0024AD4D00448D6C0028AD4C004855
-:109D50008D62002C0E000EBCAD42004C8FA6002080
-:109D60002407000210C700118FA300200003202B3E
-:109D700000048023027098240060802100609021FC
-:109D80000A0011150010882B962700128F8400807E
-:109D90000000902130E5FFFFA7A700140E000E6B16
-:109DA000241100010A0011C03C1080003C19800001
-:109DB0003C0280088F240100905800080E000E42DB
-:109DC0003305007F8F8E00248FAF00208FA40028E2
-:109DD000A1CF00000E000E9D8F9000248FAD0024B7
-:109DE00000023B803C0B420000ED40258F87008441
-:109DF000010B2025AE0400048CE500388F90002470
-:109E000000005021000A1900AE0500188CEC003447
-:109E10003C087FFF3504FFFFAE0C001C90E9003EBC
-:109E20008E1F001C8E1800180009C9000009370297
-:109E300003F968210066102501B9782B030270210F
-:109E400001CF5821AE0D001CAE0B0018AE00000C67
-:109E5000AE00001090E5003E8FAF0028240E0005F4
-:109E6000A605001494EC00042405C00001E4582465
-:109E7000A60C001690EA003E01E02021A60A002070
-:109E800094E60004A6060022AE00002490E3003F02
-:109E9000A603000290E9003E90FF003D03E9C823BD
-:109EA00027380001A21800018F8D00243C10800883
-:109EB000ADAF0008A1AE00308F9800248F820084DF
-:109EC000360F0100970C0032944A00122410FF80D4
-:109ED00000AC382431463FFF00E61825A7030032C6
-:109EE000930900322405FFBF2403FFDF313F003F09
-:109EF00037F90040A31900328F8C00242418FFFF8B
-:109F0000AD8000348DEE00C0AD8E0038918D003CE8
-:109F100031A2007FA182003C8F87002490EA003CA0
-:109F200001453024A0E6003C8F9900249329003C91
-:109F30000123F824A33F003C8F8D00243C1F8008A0
-:109F4000ADB80040ADB2004491AF00483C12800073
-:109F500001F07025A1AE00488F8700248F86008411
-:109F60008CEC004801921024004B5025ACEA0048CC
-:109F700090C5003EA0E5004C8F8800848F830024AC
-:109F800095090004A469004E8FE500600E0002E60A
-:109F9000000000008F99FF2C8FAE00280002814046
-:109FA000932F007C0002C1000218682131F20002E8
-:109FB00000402821164000AA01CD30213C0A80082B
-:109FC000354300809069007C313F000413E00003BA
-:109FD0008FAE00280005608000CC3021240D0004E5
-:109FE0008F90002431C7000301A758233168000374
-:109FF00000C82021AE0400343C068008A6250038A5
-:10A000003C0580008CA4010090D100080E000E8752
-:10A010003225007F0E000EBC000000000A0012AACC
-:10A020008FA300208F8500208CC2003824180003E5
-:10A03000A4A00008ACA200008CDF0034A0A0000A9D
-:10A040008F920084ACBF00043C040080924F003F1C
-:10A05000A0B8000C8CAE000C3C0DFF9FA0AF000B15
-:10A0600001C4402535ABFFFF3C11FFEF8F98008402
-:10A07000010B30243639FFFF00D96024ACAC000C52
-:10A080008F030014971F00128F870080ACA300106D
-:10A090008F090014ACA00018ACA00020ACA90014DB
-:10A0A000ACA000248F0A001833E93FFF000911809B
-:10A0B000ACAA00288F1200080047782133EE000177
-:10A0C000ACB200308F08000C8F990024000F69C2D9
-:10A0D000000E238001A45821241100023C068008B0
-:10A0E000A4AB001CA4A00034ACA8002CA331000039
-:10A0F00034D90080972C005C8F8F00243C034200F1
-:10A10000318AFFFF01433825ADE700048F820084C8
-:10A11000241800012411C0008C5F0038240700348B
-:10A12000ADFF00188C520034ADF2001CADE0000C05
-:10A13000ADE00010A5E00014A5E00016A5E00020A9
-:10A14000A5E00022ADE00024A5F00002A1F8000186
-:10A150008F8B00248F8E0084AD70000891CD00009D
-:10A16000A16D00308F8800848F8400249105000148
-:10A17000A08500318F920024964C0032019150242A
-:10A1800001491825A6430032925F003233E2003FB6
-:10A19000A24200329338007C330F000215E0000227
-:10A1A0008F840024240700303C028008AC870034F0
-:10A1B000345201008E5F00C0240EFFBF02009021C8
-:10A1C000AC9F00389098003C330F007FA08F003C7C
-:10A1D0008F880024910D003C01AE5824A10B003C57
-:10A1E0008F86002490D1003C36390020A0D9003C55
-:10A1F0008F8A00848F8500240010882B8D4C0020CE
-:10A20000ACAC00408D430024ACA300448D49002831
-:10A21000ACA900488D47002CACA7004C0E000EBC2A
-:10A220003C1080000A0011160000000094CD00527E
-:10A230003C0B08008D6B0024016D8821A4D10052D5
-:10A240000A0010C1001E882BA08700018F84002403
-:10A25000240D0001AC8D00080A00125F3C18800834
-:10A26000000290800A00133E00D2302127BDFFE09B
-:10A270003C0D8008AFB20018AFB00010AFBF001C9B
-:10A28000AFB1001435B200808E4C001835A8010023
-:10A29000964B000695A70050910900EC000C560261
-:10A2A000016728233143007F312600FF2402000389
-:10A2B000A3830088AF84008010C2001B30B0FFFF72
-:10A2C000910600EC2412000530C200FF105200334A
-:10A2D00000000000160000098FBF001C8FB200189C
-:10A2E0008FB100148FB00010240D0C003C0C8000C6
-:10A2F00027BD002003E00008AD8D00240E0010A44F
-:10A30000020020218FBF001C8FB200188FB10014F3
-:10A310008FB00010240D0C003C0C800027BD0020E5
-:10A3200003E00008AD8D0024965800789651007A1D
-:10A33000924E007D0238782631E8FFFF31C400C01C
-:10A34000148000092D1100011600003700000000E4
-:10A350005620FFE28FBF001C0E000F7A00000000A5
-:10A360000A0014068FBF001C1620FFDA0000000050
-:10A370000E000F7A000000001440FFD88FBF001CB1
-:10A380001600002200000000925F007D33E2003FD3
-:10A39000A242007D0A0014068FBF001C950900DA56
-:10A3A0008F86006000802821240400050E000674BA
-:10A3B0003130FFFF978300723C0480002465FFFF6B
-:10A3C000A78500728C8A01B80540FFFE00000000DE
-:10A3D000AC8001808FBF001CAC9001848FB200184C
-:10A3E0008FB100148FB000103C0760133C0B1000BD
-:10A3F000240D0C003C0C800027BD0020AC87018898
-:10A40000AC8B01B803E00008AD8D00240E0010A451
-:10A41000020020215040FFB18FBF001C925F007DE1
-:10A420000A00143333E2003F0E0010A40200202182
-:10A430001440FFAA8FBF001C12200007000000007C
-:10A440009259007D3330003F36020040A242007D29
-:10A450000A0014068FBF001C0E000F7A00000000D7
-:10A460005040FF9E8FBF001C9259007D3330003F4B
-:08A470000A00146236020040EC
-:08A47800000000000000001BC1
-:10A480000000000F0000000A0000000800000006A5
-:10A4900000000005000000050000000400000004AA
-:10A4A00000000003000000030000000300000003A0
-:10A4B0000000000300000002000000020000000293
-:10A4C0000000000200000002000000020000000284
-:10A4D0000000000200000002000000020000000274
-:10A4E0000000000200000002000000020000000264
-:0CA4F0000000000100000001000000015D
-:04A4FC0080080100D3
-:10A50000800800808008000000000C0000003080FF
-:10A5100008000F4808000FF40800100C0800102075
-:10A520000800103408000F4808000F4808001068A1
-:10A53000080010A0080010B0080010D8080017C8C4
-:10A54000080017C8080018000800180008001814B0
-:10A55000080017E408001A3C08001A0808001A94BA
-:10A5600008001A9408001B1C08001A4C80080240BE
-:10A57000080021A808001FF4080021D00800226864
-:10A58000080023B808002404080025280800243007
-:10A59000080024B408002064080029D008002974A9
-:10A5A0000800201008002010080020100800259C3A
-:10A5B0000800259C08002010080020100800284CE6
-:10A5C00008002010080020100800201008002010AB
-:10A5D000080028AC080020100800201008002010F7
-:10A5E000080020100800201008002010080020108B
-:10A5F000080020100800201008002010080020107B
-:10A600000800201008002010080020100800242452
-:10A6100008002010080020100800291C0800201045
-:10A62000080020100800201008002010080020104A
-:10A63000080020100800201008002010080020103A
-:10A64000080020100800201008002010080020102A
-:10A65000080020100800201008002010080020101A
-:10A66000080027700800201008002010080026E4C9
-:10A6700008002640080037880800375C08003728A3
-:10A68000080036FC080036DC08003690800801001F
-:10A69000800800808008000080080080080046F0E4
-:10A6A0000800472808004670080046F0080046F0F9
-:0CA6B00008004450080046F008004AC4AE
-:04A6BC000A000C760E
-:10A6C00000000000000000000000000D72787035EE
-:10A6D0002E302E306A330000050000030000000019
-:10A6E0000000000100000000000000000000000069
-:10A6F000000000000000000000000000000000005A
-:10A700000000000000000000000000000000000049
-:10A710000000000000000000000000000000000039
-:10A720000000000000000000000000000000000029
-:10A730000000000000000000000000000000000019
-:10A740000000000000000000000000000000000009
-:10A7500000000000000000000000000000000000F9
-:10A7600000000000000000000000000000000000E9
-:10A7700000000000000000000000000000000000D9
-:10A7800000000000000000000000000000000000C9
-:10A7900000000000000000000000000000000000B9
-:10A7A00000000000000000000000000000000000A9
-:10A7B0000000000000000000000000000000000099
-:10A7C0000000000000000000000000000000000089
-:10A7D0000000000000000000000000000000000079
-:10A7E0000000000000000000000000000000000069
-:10A7F0000000000000000000000000000000000059
-:10A800000000000000000000000000000000000048
-:10A810000000000000000000000000000000000038
-:10A820000000000000000000000000000000000028
-:10A830000000000000000000000000000000000018
-:10A840000000000000000000000000000000000008
-:10A8500000000000000000000000000000000000F8
-:10A8600000000000000000000000000000000000E8
-:10A8700000000000000000000000000000000000D8
-:10A8800000000000000000000000000000000000C8
-:10A8900000000000000000000000000000000000B8
-:10A8A00000000000000000000000000000000000A8
-:10A8B0000000000000000000000000000000000098
-:10A8C0000000000000000000000000000000000088
-:10A8D0000000000000000000000000000000000078
-:10A8E0000000000000000000000000000000000068
-:10A8F0000000000000000000000000000000000058
-:10A900000000000000000000000000000000000047
-:10A910000000000000000000000000000000000037
-:10A920000000000000000000000000000000000027
-:10A930000000000000000000000000000000000017
-:10A940000000000000000000000000000000000007
-:10A9500000000000000000000000000000000000F7
-:10A9600000000000000000000000000000000000E7
-:10A9700000000000000000000000000000000000D7
-:10A9800000000000000000000000000000000000C7
-:10A9900000000000000000000000000000000000B7
-:10A9A00000000000000000000000000000000000A7
-:10A9B0000000000000000000000000000000000097
-:10A9C0000000000000000000000000000000000087
-:10A9D0000000000000000000000000000000000077
-:10A9E0000000000000000000000000000000000067
-:10A9F0000000000000000000000000000000000057
-:10AA00000000000000000000000000000000000046
-:10AA10000000000000000000000000000000000036
-:10AA20000000000000000000000000000000000026
-:10AA30000000000000000000000000000000000016
-:10AA40000000000000000000000000000000000006
-:10AA500000000000000000000000000000000000F6
-:10AA600000000000000000000000000000000000E6
-:10AA700000000000000000000000000000000000D6
-:10AA800000000000000000000000000000000000C6
-:10AA900000000000000000000000000000000000B6
-:10AAA00000000000000000000000000000000000A6
-:10AAB0000000000000000000000000000000000096
-:10AAC0000000000000000000000000000000000086
-:10AAD0000000000000000000000000000000000076
-:10AAE0000000000000000000000000000000000066
-:10AAF0000000000000000000000000000000000056
-:10AB00000000000000000000000000000000000045
-:10AB10000000000000000000000000000000000035
-:10AB20000000000000000000000000000000000025
-:10AB30000000000000000000000000000000000015
-:10AB40000000000000000000000000000000000005
-:10AB500000000000000000000000000000000000F5
-:10AB600000000000000000000000000000000000E5
-:10AB700000000000000000000000000000000000D5
-:10AB800000000000000000000000000000000000C5
-:10AB900000000000000000000000000000000000B5
-:10ABA00000000000000000000000000000000000A5
-:10ABB0000000000000000000000000000000000095
-:10ABC0000000000000000000000000000000000085
-:10ABD0000000000000000000000000000000000075
-:10ABE0000000000000000000000000000000000065
-:10ABF0000000000000000000000000000000000055
-:10AC00000000000000000000000000000000000044
-:10AC10000000000000000000000000000000000034
-:10AC20000000000000000000000000000000000024
-:10AC30000000000000000000000000000000000014
-:10AC40000000000000000000000000000000000004
-:10AC500000000000000000000000000000000000F4
-:10AC600000000000000000000000000000000000E4
-:10AC700000000000000000000000000000000000D4
-:10AC800000000000000000000000000000000000C4
-:10AC900000000000000000000000000000000000B4
-:10ACA00000000000000000000000000000000000A4
-:10ACB0000000000000000000000000000000000094
-:10ACC0000000000000000000000000000000000084
-:10ACD0000000000000000000000000000000000074
-:10ACE0000000000000000000000000000000000064
-:10ACF0000000000000000000000000000000000054
-:10AD00000000000000000000000000000000000043
-:10AD10000000000000000000000000000000000033
-:10AD20000000000000000000000000000000000023
-:10AD30000000000000000000000000000000000013
-:10AD40000000000000000000000000000000000003
-:10AD500000000000000000000000000000000000F3
-:10AD600000000000000000000000000000000000E3
-:10AD700000000000000000000000000000000000D3
-:10AD800000000000000000000000000000000000C3
-:10AD900000000000000000000000000000000000B3
-:10ADA00000000000000000000000000000000000A3
-:10ADB0000000000000000000000000000000000093
-:10ADC0000000000000000000000000000000000083
-:10ADD0000000000000000000000000000000000073
-:10ADE0000000000000000000000000000000000063
-:10ADF0000000000000000000000000000000000053
-:10AE00000000000000000000000000000000000042
-:10AE10000000000000000000000000000000000032
-:10AE20000000000000000000000000000000000022
-:10AE30000000000000000000000000000000000012
-:10AE40000000000000000000000000000000000002
-:10AE500000000000000000000000000000000000F2
-:10AE600000000000000000000000000000000000E2
-:10AE700000000000000000000000000000000000D2
-:10AE800000000000000000000000000000000000C2
-:10AE900000000000000000000000000000000000B2
-:10AEA00000000000000000000000000000000000A2
-:10AEB0000000000000000000000000000000000092
-:10AEC0000000000000000000000000000000000082
-:10AED0000000000000000000000000000000000072
-:10AEE0000000000000000000000000000000000062
-:10AEF0000000000000000000000000000000000052
-:10AF00000000000000000000000000000000000041
-:10AF10000000000000000000000000000000000031
-:10AF20000000000000000000000000000000000021
-:10AF30000000000000000000000000000000000011
-:10AF40000000000000000000000000000000000001
-:10AF500000000000000000000000000000000000F1
-:10AF600000000000000000000000000000000000E1
-:10AF700000000000000000000000000000000000D1
-:10AF800000000000000000000000000000000000C1
-:10AF900000000000000000000000000000000000B1
-:10AFA00000000000000000000000000000000000A1
-:10AFB0000000000000000000000000000000000091
-:10AFC0000000000000000000000000000000000081
-:10AFD0000000000000000000000000000000000071
-:10AFE0000000000000000000000000000000000061
-:10AFF0000000000000000000000000000000000051
-:10B000000000000000000000000000000000000040
-:10B010000000000000000000000000000000000030
-:10B020000000000000000000000000000000000020
-:10B030000000000000000000000000000000000010
-:10B040000000000000000000000000000000000000
-:10B0500000000000000000000000000000000000F0
-:10B0600000000000000000000000000000000000E0
-:10B0700000000000000000000000000000000000D0
-:10B0800000000000000000000000000000000000C0
-:10B0900000000000000000000000000000000000B0
-:10B0A00000000000000000000000000000000000A0
-:10B0B0000000000000000000000000000000000090
-:10B0C0000000000000000000000000000000000080
-:10B0D0000000000000000000000000000000000070
-:10B0E0000000000000000000000000000000000060
-:10B0F0000000000000000000000000000000000050
-:10B10000000000000000000000000000000000003F
-:10B11000000000000000000000000000000000002F
-:10B12000000000000000000000000000000000001F
-:10B13000000000000000000000000000000000000F
-:10B1400000000000000000000000000000000000FF
-:10B1500000000000000000000000000000000000EF
-:10B1600000000000000000000000000000000000DF
-:10B1700000000000000000000000000000000000CF
-:10B1800000000000000000000000000000000000BF
-:10B1900000000000000000000000000000000000AF
-:10B1A000000000000000000000000000000000009F
-:10B1B000000000000000000000000000000000008F
-:10B1C000000000000000000000000000000000007F
-:10B1D000000000000000000000000000000000006F
-:10B1E000000000000000000000000000000000005F
-:10B1F000000000000000000000000000000000004F
-:10B20000000000000000000000000000000000003E
-:10B21000000000000000000000000000000000002E
-:10B22000000000000000000000000000000000001E
-:10B23000000000000000000000000000000000000E
-:10B2400000000000000000000000000000000000FE
-:10B2500000000000000000000000000000000000EE
-:10B2600000000000000000000000000000000000DE
-:10B2700000000000000000000000000000000000CE
-:10B2800000000000000000000000000000000000BE
-:10B2900000000000000000000000000000000000AE
-:10B2A000000000000000000000000000000000009E
-:10B2B000000000000000000000000000000000008E
-:10B2C000000000000000000000000000000000007E
-:10B2D000000000000000000000000000000000006E
-:10B2E000000000000000000000000000000000005E
-:10B2F000000000000000000000000000000000004E
-:10B30000000000000000000000000000000000003D
-:10B31000000000000000000000000000000000002D
-:10B32000000000000000000000000000000000001D
-:10B33000000000000000000000000000000000000D
-:10B3400000000000000000000000000000000000FD
-:10B3500000000000000000000000000000000000ED
-:10B3600000000000000000000000000000000000DD
-:10B3700000000000000000000000000000000000CD
-:10B3800000000000000000000000000000000000BD
-:10B3900000000000000000000000000000000000AD
-:10B3A000000000000000000000000000000000009D
-:10B3B000000000000000000000000000000000008D
-:10B3C000000000000000000000000000000000007D
-:10B3D000000000000000000000000000000000006D
-:10B3E000000000000000000000000000000000005D
-:10B3F000000000000000000000000000000000004D
-:10B40000000000000000000000000000000000003C
-:10B41000000000000000000000000000000000002C
-:10B42000000000000000000000000000000000001C
-:10B43000000000000000000000000000000000000C
-:10B4400000000000000000000000000000000000FC
-:10B4500000000000000000000000000000000000EC
-:10B4600000000000000000000000000000000000DC
-:10B4700000000000000000000000000000000000CC
-:10B4800000000000000000000000000000000000BC
-:10B4900000000000000000000000000000000000AC
-:10B4A000000000000000000000000000000000009C
-:10B4B000000000000000000000000000000000008C
-:10B4C000000000000000000000000000000000007C
-:10B4D000000000000000000000000000000000006C
-:10B4E000000000000000000000000000000000005C
-:10B4F000000000000000000000000000000000004C
-:10B50000000000000000000000000000000000003B
-:10B51000000000000000000000000000000000002B
-:10B52000000000000000000000000000000000001B
-:10B53000000000000000000000000000000000000B
-:10B5400000000000000000000000000000000000FB
-:10B5500000000000000000000000000000000000EB
-:10B5600000000000000000000000000000000000DB
-:10B5700000000000000000000000000000000000CB
-:10B5800000000000000000000000000000000000BB
-:10B5900000000000000000000000000000000000AB
-:10B5A000000000000000000000000000000000009B
-:10B5B000000000000000000000000000000000008B
-:10B5C000000000000000000000000000000000007B
-:10B5D000000000000000000000000000000000006B
-:10B5E000000000000000000000000000000000005B
-:10B5F000000000000000000000000000000000004B
-:10B60000000000000000000000000000000000003A
-:10B61000000000000000000000000000000000002A
-:10B62000000000000000000000000000000000001A
-:10B63000000000000000000000000000000000000A
-:10B6400000000000000000000000000000000000FA
-:10B6500000000000000000000000000000000000EA
-:10B6600000000000000000000000000000000000DA
-:10B6700000000000000000000000000000000000CA
-:10B6800000000000000000000000000000000000BA
-:10B6900000000000000000000000000000000000AA
-:10B6A000000000000000000000000000000000009A
-:10B6B000000000000000000000000000000000008A
-:10B6C000000000000000000000000000000000007A
-:10B6D000000000000000000000000000000000006A
-:10B6E000000000000000000000000000000000005A
-:10B6F000000000000000000000000000000000004A
-:10B700000000000000000000000000000000000039
-:10B710000000000000000000000000000000000029
-:10B720000000000000000000000000000000000019
-:10B730000000000000000000000000000000000009
-:10B7400000000000000000000000000000000000F9
-:10B7500000000000000000000000000000000000E9
-:10B7600000000000000000000000000000000000D9
-:10B7700000000000000000000000000000000000C9
-:10B7800000000000000000000000000000000000B9
-:10B7900000000000000000000000000000000000A9
-:10B7A0000000000000000000000000000000000099
-:10B7B0000000000000000000000000000000000089
-:10B7C0000000000000000000000000000000000079
-:10B7D0000000000000000000000000000000000069
-:10B7E0000000000000000000000000000000000059
-:10B7F0000000000000000000000000000000000049
-:10B800000000000000000000000000000000000038
-:10B810000000000000000000000000000000000028
-:10B820000000000000000000000000000000000018
-:10B830000000000000000000000000000000000008
-:10B8400000000000000000000000000000000000F8
-:10B8500000000000000000000000000000000000E8
-:10B8600000000000000000000000000000000000D8
-:10B8700000000000000000000000000000000000C8
-:10B8800000000000000000000000000000000000B8
-:10B8900000000000000000000000000000000000A8
-:10B8A0000000000000000000000000000000000098
-:10B8B0000000000000000000000000000000000088
-:10B8C0000000000000000000000000000000000078
-:10B8D0000000000000000000000000000000000068
-:10B8E0000000000000000000000000000000000058
-:10B8F0000000000000000000000000000000000048
-:10B900000000000000000000000000000000000037
-:10B910000000000000000000000000000000000027
-:10B920000000000000000000000000000000000017
-:10B930000000000000000000000000000000000007
-:10B9400000000000000000000000000000000000F7
-:10B9500000000000000000000000000000000000E7
-:10B9600000000000000000000000000000000000D7
-:10B9700000000000000000000000000000000000C7
-:10B9800000000000000000000000000000000000B7
-:10B9900000000000000000000000000000000000A7
-:10B9A0000000000000000000000000000000000097
-:10B9B0000000000000000000000000000000000087
-:10B9C0000000000000000000000000000000000077
-:10B9D0000000000000000000000000000000000067
-:10B9E0000000000000000000000000000000000057
-:10B9F0000000000000000000000000000000000047
-:10BA00000000000000000000000000000000000036
-:10BA10000000000000000000000000000000000026
-:10BA20000000000000000000000000000000000016
-:10BA30000000000000000000000000000000000006
-:10BA400000000000000000000000000000000000F6
-:10BA500000000000000000000000000000000000E6
-:10BA600000000000000000000000000000000000D6
-:10BA700000000000000000000000000000000000C6
-:10BA800000000000000000000000000000000000B6
-:10BA900000000000000000000000000000000000A6
-:10BAA0000000000000000000000000000000000096
-:10BAB0000000000000000000000000000000000086
-:10BAC0000000000000000000000000000000000076
-:10BAD0000000000000000000000000000000000066
-:10BAE0000000000000000000000000000000000056
-:10BAF0000000000000000000000000000000000046
-:10BB00000000000000000000000000000000000035
-:10BB10000000000000000000000000000000000025
-:10BB20000000000000000000000000000000000015
-:10BB30000000000000000000000000000000000005
-:10BB400000000000000000000000000000000000F5
-:10BB500000000000000000000000000000000000E5
-:10BB600000000000000000000000000000000000D5
-:10BB700000000000000000000000000000000000C5
-:10BB800000000000000000000000000000000000B5
-:10BB900000000000000000000000000000000000A5
-:10BBA0000000000000000000000000000000000095
-:10BBB0000000000000000000000000000000000085
-:10BBC0000000000000000000000000000000000075
-:10BBD0000000000000000000000000000000000065
-:10BBE0000000000000000000000000000000000055
-:10BBF0000000000000000000000000000000000045
-:10BC00000000000000000000000000000000000034
-:10BC10000000000000000000000000000000000024
-:10BC20000000000000000000000000000000000014
-:10BC30000000000000000000000000000000000004
-:10BC400000000000000000000000000000000000F4
-:10BC500000000000000000000000000000000000E4
-:10BC600000000000000000000000000000000000D4
-:10BC700000000000000000000000000000000000C4
-:10BC800000000000000000000000000000000000B4
-:10BC900000000000000000000000000000000000A4
-:10BCA0000000000000000000000000000000000094
-:10BCB0000000000000000000000000000000000084
-:10BCC0000000000000000000000000000000000074
-:10BCD0000000000000000000000000000000000064
-:10BCE0000000000000000000000000000000000054
-:10BCF0000000000000000000000000000000000044
-:10BD00000000000000000000000000000000000033
-:10BD10000000000000000000000000000000000023
-:10BD20000000000000000000000000000000000013
-:10BD30000000000000000000000000000000000003
-:10BD400000000000000000000000000000000000F3
-:10BD500000000000000000000000000000000000E3
-:10BD600000000000000000000000000000000000D3
-:10BD700000000000000000000000000000000000C3
-:10BD800000000000000000000000000000000000B3
-:10BD900000000000000000000000000000000000A3
-:10BDA0000000000000000000000000000000000093
-:10BDB0000000000000000000000000000000000083
-:10BDC0000000000000000000000000000000000073
-:10BDD0000000000000000000000000000000000063
-:10BDE0000000000000000000000000000000000053
-:10BDF0000000000000000000000000000000000043
-:10BE00000000000000000000000000000000000032
-:10BE10000000000000000000000000000000000022
-:10BE20000000000000000000000000000000000012
-:10BE30000000000000000000000000000000000002
-:10BE400000000000000000000000000000000000F2
-:10BE500000000000000000000000000000000000E2
-:10BE600000000000000000000000000000000000D2
-:10BE700000000000000000000000000000000000C2
-:10BE800000000000000000000000000000000000B2
-:10BE900000000000000000000000000000000000A2
-:10BEA0000000000000000000000000000000000092
-:10BEB0000000000000000000000000000000000082
-:10BEC0000000000000000000000000000000000072
-:10BED0000000000000000000000000000000000062
-:10BEE0000000000000000000000000000000000052
-:10BEF0000000000000000000000000000000000042
-:10BF00000000000000000000000000000000000031
-:10BF10000000000000000000000000000000000021
-:10BF20000000000000000000000000000000000011
-:10BF30000000000000000000000000000000000001
-:10BF400000000000000000000000000000000000F1
-:10BF500000000000000000000000000000000000E1
-:10BF600000000000000000000000000000000000D1
-:10BF700000000000000000000000000000000000C1
-:10BF800000000000000000000000000000000000B1
-:10BF900000000000000000000000000000000000A1
-:10BFA0000000000000000000000000000000000091
-:10BFB0000000000000000000000000000000000081
-:10BFC0000000000000000000000000000000000071
-:10BFD0000000000000000000000000000000000061
-:10BFE0000000000000000000000000000000000051
-:10BFF0000000000000000000000000000000000041
-:10C000000000000000000000000000000000000030
-:10C010000000000000000000000000000000000020
-:10C020000000000000000000000000000000000010
-:10C030000000000000000000000000000000000000
-:10C0400000000000000000000000000000000000F0
-:10C0500000000000000000000000000000000000E0
-:10C0600000000000000000000000000000000000D0
-:10C0700000000000000000000000000000000000C0
-:10C0800000000000000000000000000000000000B0
-:10C0900000000000000000000000000000000000A0
-:10C0A0000000000000000000000000000000000090
-:10C0B0000000000000000000000000000000000080
-:10C0C0000000000000000000000000000000000070
-:10C0D0000000000000000000000000000000000060
-:10C0E0000000000000000000000000000000000050
-:10C0F0000000000000000000000000000000000040
-:10C10000000000000000000000000000000000002F
-:10C11000000000000000000000000000000000001F
-:10C12000000000000000000000000000000000000F
-:10C1300000000000000000000000000000000000FF
-:10C1400000000000000000000000000000000000EF
-:10C1500000000000000000000000000000000000DF
-:10C1600000000000000000000000000000000000CF
-:10C1700000000000000000000000000000000000BF
-:10C1800000000000000000000000000000000000AF
-:10C19000000000000000000000000000000000009F
-:10C1A000000000000000000000000000000000008F
-:10C1B000000000000000000000000000000000007F
-:10C1C000000000000000000000000000000000006F
-:10C1D000000000000000000000000000000000005F
-:10C1E000000000000000000000000000000000004F
-:10C1F000000000000000000000000000000000003F
-:10C20000000000000000000000000000000000002E
-:10C21000000000000000000000000000000000001E
-:10C22000000000000000000000000000000000000E
-:10C2300000000000000000000000000000000000FE
-:10C2400000000000000000000000000000000000EE
-:10C2500000000000000000000000000000000000DE
-:10C2600000000000000000000000000000000000CE
-:10C2700000000000000000000000000000000000BE
-:10C2800000000000000000000000000000000000AE
-:10C29000000000000000000000000000000000009E
-:10C2A000000000000000000000000000000000008E
-:10C2B000000000000000000000000000000000007E
-:10C2C000000000000000000000000000000000006E
-:10C2D000000000000000000000000000000000005E
-:10C2E000000000000000000000000000000000004E
-:10C2F000000000000000000000000000000000003E
-:10C30000000000000000000000000000000000002D
-:10C31000000000000000000000000000000000001D
-:10C32000000000000000000000000000000000000D
-:10C3300000000000000000000000000000000000FD
-:10C3400000000000000000000000000000000000ED
-:10C3500000000000000000000000000000000000DD
-:10C3600000000000000000000000000000000000CD
-:10C3700000000000000000000000000000000000BD
-:10C3800000000000000000000000000000000000AD
-:10C39000000000000000000000000000000000009D
-:10C3A000000000000000000000000000000000008D
-:10C3B000000000000000000000000000000000007D
-:10C3C000000000000000000000000000000000006D
-:10C3D000000000000000000000000000000000005D
-:10C3E000000000000000000000000000000000004D
-:10C3F000000000000000000000000000000000003D
-:10C40000000000000000000000000000000000002C
-:10C41000000000000000000000000000000000001C
-:10C42000000000000000000000000000000000000C
-:10C4300000000000000000000000000000000000FC
-:10C4400000000000000000000000000000000000EC
-:10C4500000000000000000000000000000000000DC
-:10C4600000000000000000000000000000000000CC
-:10C4700000000000000000000000000000000000BC
-:10C4800000000000000000000000000000000000AC
-:10C49000000000000000000000000000000000009C
-:10C4A000000000000000000000000000000000008C
-:10C4B000000000000000000000000000000000007C
-:10C4C000000000000000000000000000000000006C
-:10C4D000000000000000000000000000000000005C
-:10C4E000000000000000000000000000000000004C
-:10C4F000000000000000000000000000000000003C
-:10C50000000000000000000000000000000000002B
-:10C51000000000000000000000000000000000001B
-:10C52000000000000000000000000000000000000B
-:10C5300000000000000000000000000000000000FB
-:10C5400000000000000000000000000000000000EB
-:10C5500000000000000000000000000000000000DB
-:10C5600000000000000000000000000000000000CB
-:10C5700000000000000000000000000000000000BB
-:10C5800000000000000000000000000000000000AB
-:10C59000000000000000000000000000000000009B
-:10C5A000000000000000000000000000000000008B
-:10C5B000000000000000000000000000000000007B
-:10C5C000000000000000000000000000000000006B
-:10C5D000000000000000000000000000000000005B
-:10C5E000000000000000000000000000000000004B
-:10C5F000000000000000000000000000000000003B
-:10C60000000000000000000000000000000000002A
-:10C61000000000000000000000000000000000001A
-:10C62000000000000000000000000000000000000A
-:10C6300000000000000000000000000000000000FA
-:10C6400000000000000000000000000000000000EA
-:10C6500000000000000000000000000000000000DA
-:10C6600000000000000000000000000000000000CA
-:10C6700000000000000000000000000000000000BA
-:10C6800000000000000000000000000000000000AA
-:10C69000000000000000000000000000000000009A
-:10C6A000000000000000000000000000000000008A
-:10C6B000000000000000000000000000000000007A
-:10C6C000000000000000000000000000000000006A
-:10C6D000000000000000000000000000000000005A
-:10C6E000000000000000000000000000000000004A
-:10C6F000000000000000000000000000000000003A
-:10C700000000000000000000000000000000000029
-:10C710000000000000000000000000000000000019
-:10C720000000000000000000000000000000000009
-:10C7300000000000000000000000000000000000F9
-:10C7400000000000000000000000000000000000E9
-:10C7500000000000000000000000000000000000D9
-:10C7600000000000000000000000000000000000C9
-:10C7700000000000000000000000000000000000B9
-:10C7800000000000000000000000000000000000A9
-:10C790000000000000000000000000000000000099
-:10C7A0000000000000000000000000000000000089
-:10C7B0000000000000000000000000000000000079
-:10C7C0000000000000000000000000000000000069
-:10C7D0000000000000000000000000000000000059
-:10C7E0000000000000000000000000000000000049
-:10C7F0000000000000000000000000000000000039
-:10C800000000000000000000000000000000000028
-:10C810000000000000000000000000000000000018
-:10C820000000000000000000000000000000000008
-:10C8300000000000000000000000000000000000F8
-:10C8400000000000000000000000000000000000E8
-:10C8500000000000000000000000000000000000D8
-:10C8600000000000000000000000000000000000C8
-:10C8700000000000000000000000000000000000B8
-:10C8800000000000000000000000000000000000A8
-:10C890000000000000000000000000000000000098
-:10C8A0000000000000000000000000000000000088
-:10C8B0000000000000000000000000000000000078
-:10C8C0000000000000000000000000000000000068
-:10C8D0000000000000000000000000000000000058
-:10C8E0000000000000000000000000000000000048
-:10C8F0000000000000000000000000000000000038
-:10C900000000000000000000000000000000000027
-:10C910000000000000000000000000000000000017
-:10C920000000000000000000000000000000000007
-:10C9300000000000000000000000000000000000F7
-:10C9400000000000000000000000000000000000E7
-:10C9500000000000000000000000000000000000D7
-:10C9600000000000000000000000000000000000C7
-:10C9700000000000000000000000000000000000B7
-:10C9800000000000000000000000000000000000A7
-:10C990000000000000000000000000000000000097
-:10C9A0000000000000000000000000000000000087
-:10C9B0000000000000000000000000000000000077
-:10C9C0000000000000000000000000000000000067
-:10C9D0000000000000000000000000000000000057
-:10C9E0000000000000000000000000000000000047
-:10C9F0000000000000000000000000000000000037
-:10CA00000000000000000000000000000000000026
-:10CA10000000000000000000000000000000000016
-:10CA20000000000000000000000000000000000006
-:10CA300000000000000000000000000000000000F6
-:10CA400000000000000000000000000000000000E6
-:10CA500000000000000000000000000000000000D6
-:10CA600000000000000000000000000000000000C6
-:10CA700000000000000000000000000000000000B6
-:10CA800000000000000000000000000000000000A6
-:10CA90000000000000000000000000000000000096
-:10CAA0000000000000000000000000000000000086
-:10CAB0000000000000000000000000000000000076
-:10CAC0000000000000000000000000000000000066
-:10CAD0000000000000000000000000000000000056
-:10CAE0000000000000000000000000000000000046
-:10CAF0000000000000000000000000000000000036
-:10CB00000000000000000000000000000000000025
-:10CB10000000000000000000000000000000000015
-:10CB20000000000000000000000000000000000005
-:10CB300000000000000000000000000000000000F5
-:10CB400000000000000000000000000000000000E5
-:10CB500000000000000000000000000000000000D5
-:10CB600000000000000000000000000000000000C5
-:10CB700000000000000000000000000000000000B5
-:10CB800000000000000000000000000000000000A5
-:10CB90000000000000000000000000000000000095
-:10CBA0000000000000000000000000000000000085
-:10CBB0000000000000000000000000000000000075
-:10CBC0000000000000000000000000000000000065
-:10CBD0000000000000000000000000000000000055
-:10CBE0000000000000000000000000000000000045
-:10CBF0000000000000000000000000000000000035
-:10CC00000000000000000000000000000000000024
-:10CC10000000000000000000000000000000000014
-:10CC20000000000000000000000000000000000004
-:10CC300000000000000000000000000000000000F4
-:10CC400000000000000000000000000000000000E4
-:10CC500000000000000000000000000000000000D4
-:10CC600000000000000000000000000000000000C4
-:10CC700000000000000000000000000000000000B4
-:10CC800000000000000000000000000000000000A4
-:10CC90000000000000000000000000000000000094
-:10CCA0000000000000000000000000000000000084
-:10CCB0000000000000000000000000000000000074
-:10CCC0000000000000000000000000000000000064
-:10CCD0000000000000000000000000000000000054
-:10CCE0000000000000000000000000000000000044
-:10CCF0000000000000000000000000000000000034
-:10CD00000000000000000000000000000000000023
-:10CD10000000000000000000000000000000000013
-:10CD20000000000000000000000000000000000003
-:10CD300000000000000000000000000000000000F3
-:10CD400000000000000000000000000000000000E3
-:10CD500000000000000000000000000000000000D3
-:10CD600000000000000000000000000000000000C3
-:10CD700000000000000000000000000000000000B3
-:10CD800000000000000000000000000000000000A3
-:10CD90000000000000000000000000000000000093
-:10CDA0000000000000000000000000000000000083
-:10CDB0000000000000000000000000000000000073
-:10CDC0000000000000000000000000000000000063
-:10CDD0000000000000000000000000000000000053
-:10CDE0000000000000000000000000000000000043
-:10CDF0000000000000000000000000000000000033
-:10CE00000000000000000000000000000000000022
-:10CE10000000000000000000000000000000000012
-:10CE20000000000000000000000000000000000002
-:10CE300000000000000000000000000000000000F2
-:10CE400000000000000000000000000000000000E2
-:10CE500000000000000000000000000000000000D2
-:10CE600000000000000000000000000000000000C2
-:10CE700000000000000000000000000000000000B2
-:10CE800000000000000000000000000000000000A2
-:10CE90000000000000000000000000000000000092
-:10CEA0000000000000000000000000000000000082
-:10CEB0000000000000000000000000000000000072
-:10CEC0000000000000000000000000000000000062
-:10CED0000000000000000000000000000000000052
-:10CEE0000000000000000000000000000000000042
-:10CEF0000000000000000000000000000000000032
-:10CF00000000000000000000000000000000000021
-:10CF10000000000000000000000000000000000011
-:10CF20000000000000000000000000000000000001
-:10CF300000000000000000000000000000000000F1
-:10CF400000000000000000000000000000000000E1
-:10CF500000000000000000000000000000000000D1
-:10CF600000000000000000000000000000000000C1
-:10CF700000000000000000000000000000000000B1
-:10CF800000000000000000000000000000000000A1
-:10CF90000000000000000000000000000000000091
-:10CFA0000000000000000000000000000000000081
-:10CFB0000000000000000000000000000000000071
-:10CFC0000000000000000000000000000000000061
-:10CFD0000000000000000000000000000000000051
-:10CFE0000000000000000000000000000000000041
-:10CFF0000000000000000000000000000000000031
-:10D000000000000000000000000000000000000020
-:10D010000000000000000000000000000000000010
-:10D020000000000000000000000000000000000000
-:10D0300000000000000000000000000000000000F0
-:10D0400000000000000000000000000000000000E0
-:10D0500000000000000000000000000000000000D0
-:10D0600000000000000000000000000000000000C0
-:10D0700000000000000000000000000000000000B0
-:10D0800000000000000000000000000000000000A0
-:10D090000000000000000000000000000000000090
-:10D0A0000000000000000000000000000000000080
-:10D0B0000000000000000000000000000000000070
-:10D0C0000000000000000000000000000000000060
-:10D0D0000000000000000000000000000000000050
-:10D0E0000000000000000000000000000000000040
-:10D0F0000000000000000000000000000000000030
-:10D10000000000000000000000000000000000001F
-:10D11000000000000000000000000000000000000F
-:10D1200000000000000000000000000000000000FF
-:10D1300000000000000000000000000000000000EF
-:10D1400000000000000000000000000000000000DF
-:10D1500000000000000000000000000000000000CF
-:10D1600000000000000000000000000000000000BF
-:10D1700000000000000000000000000000000000AF
-:10D18000000000000000000000000000000000009F
-:10D19000000000000000000000000000000000008F
-:10D1A000000000000000000000000000000000007F
-:10D1B000000000000000000000000000000000006F
-:10D1C000000000000000000000000000000000005F
-:10D1D000000000000000000000000000000000004F
-:10D1E000000000000000000000000000000000003F
-:10D1F000000000000000000000000000000000002F
-:10D20000000000000000000000000000000000001E
-:10D21000000000000000000000000000000000000E
-:10D2200000000000000000000000000000000000FE
-:10D2300000000000000000000000000000000000EE
-:10D2400000000000000000000000000000000000DE
-:10D2500000000000000000000000000000000000CE
-:10D2600000000000000000000000000000000000BE
-:10D2700000000000000000000000000000000000AE
-:10D28000000000000000000000000000000000009E
-:10D29000000000000000000000000000000000008E
-:10D2A000000000000000000000000000000000007E
-:10D2B000000000000000000000000000000000006E
-:10D2C000000000000000000000000000000000005E
-:10D2D000000000000000000000000000000000004E
-:10D2E000000000000000000000000000000000003E
-:10D2F000000000000000000000000000000000002E
-:10D30000000000000000000000000000000000001D
-:10D31000000000000000000000000000000000000D
-:10D3200000000000000000000000000000000000FD
-:10D3300000000000000000000000000000000000ED
-:10D3400000000000000000000000000000000000DD
-:10D3500000000000000000000000000000000000CD
-:10D3600000000000000000000000000000000000BD
-:10D3700000000000000000000000000000000000AD
-:10D38000000000000000000000000000000000009D
-:10D39000000000000000000000000000000000008D
-:10D3A000000000000000000000000000000000007D
-:10D3B000000000000000000000000000000000006D
-:10D3C000000000000000000000000000000000005D
-:10D3D000000000000000000000000000000000004D
-:10D3E000000000000000000000000000000000003D
-:10D3F000000000000000000000000000000000002D
-:10D40000000000000000000000000000000000001C
-:10D41000000000000000000000000000000000000C
-:10D4200000000000000000000000000000000000FC
-:10D4300000000000000000000000000000000000EC
-:10D4400000000000000000000000000000000000DC
-:10D4500000000000000000000000000000000000CC
-:10D4600000000000000000000000000000000000BC
-:10D4700000000000000000000000000000000000AC
-:10D48000000000000000000000000000000000009C
-:10D49000000000000000000000000000000000008C
-:10D4A000000000000000000000000000000000007C
-:10D4B000000000000000000000000000000000006C
-:10D4C000000000000000000000000000000000005C
-:10D4D000000000000000000000000000000000004C
-:10D4E000000000000000000000000000000000003C
-:10D4F000000000000000000000000000000000002C
-:10D50000000000000000000000000000000000001B
-:10D51000000000000000000000000000000000000B
-:10D5200000000000000000000000000000000000FB
-:10D5300000000000000000000000000000000000EB
-:10D5400000000000000000000000000000000000DB
-:10D5500000000000000000000000000000000000CB
-:10D5600000000000000000000000000000000000BB
-:10D5700000000000000000000000000000000000AB
-:10D58000000000000000000000000000000000009B
-:10D59000000000000000000000000000000000008B
-:10D5A000000000000000000000000000000000007B
-:10D5B000000000000000000000000000000000006B
-:10D5C000000000000000000000000000000000005B
-:10D5D000000000000000000000000000000000004B
-:10D5E000000000000000000000000000000000003B
-:10D5F000000000000000000000000000000000002B
-:10D60000000000000000000000000000000000001A
-:10D61000000000000000000000000000000000000A
-:10D6200000000000000000000000000000000000FA
-:10D6300000000000000000000000000000000000EA
-:10D6400000000000000000000000000000000000DA
-:10D6500000000000000000000000000000000000CA
-:10D6600000000000000000000000000000000000BA
-:10D6700000000000000000000000000000000000AA
-:10D68000000000000000000000000000000000009A
-:10D69000000000000000000000000000000000008A
-:10D6A000000000000000000000000000000000007A
-:10D6B000000000000000000000000000000000006A
-:10D6C000000000000000000000000000000000005A
-:10D6D000000000000000000000000000000000004A
-:10D6E000000000000000000000000000000000003A
-:10D6F000000000000000000000000000000000002A
-:10D700000000000000000000000000000000000019
-:10D710000000000000000000000000000000000009
-:10D7200000000000000000000000000000000000F9
-:10D7300000000000000000000000000000000000E9
-:10D7400000000000000000000000000000000000D9
-:10D7500000000000000000000000000000000000C9
-:10D7600000000000000000000000000000000000B9
-:10D7700000000000000000000000000000000000A9
-:10D780000000000000000000000000000000000099
-:10D790000000000000000000000000000000000089
-:10D7A0000000000000000000000000000000000079
-:10D7B0000000000000000000000000000000000069
-:10D7C0000000000000000000000000000000000059
-:10D7D0000000000000000000000000000000000049
-:10D7E0000000000000000000000000000000000039
-:10D7F0000000000000000000000000000000000029
-:10D800000000000000000000000000000000000018
-:10D810000000000000000000000000000000000008
-:10D8200000000000000000000000000000000000F8
-:10D8300000000000000000000000000000000000E8
-:10D8400000000000000000000000000000000000D8
-:10D8500000000000000000000000000000000000C8
-:10D8600000000000000000000000000000000000B8
-:10D8700000000000000000000000000000000000A8
-:10D880000000000000000000000000000000000098
-:10D890000000000000000000100000030000000075
-:10D8A0000000000D0000000D3C020801244282200F
-:10D8B0003C030801246382E0AC4000000043202BBD
-:10D8C0001480FFFD244200043C1D080037BD9FFC6E
-:10D8D00003A0F0213C100800261031D83C1C0801A0
-:10D8E000279C82200E0011EA000000000000000DBD
-:10D8F0003C02800030A5FFFF30C600FF34430180AA
-:10D900003C0880008D0901B80520FFFE00000000E2
-:10D91000AC64000024040002A4650008A066000AAC
-:10D92000A064000BAC6700183C03100003E0000883
-:10D93000AD0301B83C0560008CA24FF80440FFFE27
-:10D9400000000000ACA44FC03C0310003C040200E7
-:10D95000ACA44FC403E00008ACA34FF89486000CBD
-:10D9600000A050212488001400062B02000510801E
-:10D97000004448210109182B10600011000000002C
-:10D98000910300002C6400095080000991190001E6
-:10D99000000360803C0D080125AD80E4018D582115
-:10D9A0008D67000000E000080000000091190001F0
-:10D9B000011940210109302B54C0FFF291030000EE
-:10D9C00003E00008000010210A000CBE2508000139
-:10D9D000910F0001240E000A15EE00400128C82313
-:10D9E0002F38000A1700003D250D00028D58000059
-:10D9F000250F0006370E0100AD4E0000910C00020D
-:10DA000091AB000191A4000291A60003000C2E002E
-:10DA1000000B3C0000A7102500041A000043C82595
-:10DA20000326C025AD580004910E000691ED0001BB
-:10DA300091E7000291E50003000E5E00000D640016
-:10DA4000016C30250007220000C410250045182570
-:10DA50002508000A0A000CBEAD430008910F000122
-:10DA6000250400022408000255E8000101202021BD
-:10DA70000A000CBE00804021910C0001240B000321
-:10DA8000158B0016000000008D580000910E00025A
-:10DA900025080003370D0008A14E00100A000CBE37
-:10DAA000AD4D000091190001240F0004172F000B49
-:10DAB0000000000091070002910400038D43000064
-:10DAC00000072A0000A4102534660004250800047D
-:10DAD000AD42000C0A000CBEAD46000003E0000899
-:10DAE0002402000127BDFFE8AFBF0014AFB0001053
-:10DAF0000E0014E0008080213C0480083485008002
-:10DB000090A600052403FFFE0200202100C310247C
-:10DB10008FBF00148FB00010A0A200050A0014EA05
-:10DB200027BD001827BDFFE8AFB00010AFBF00143D
-:10DB30000E000F4E008080213C06800834C5008016
-:10DB400090A4000024020050308300FF1062000700
-:10DB50003C098000020020218FBF00148FB000100C
-:10DB6000AD2001800A00101027BD00182408010014
-:10DB70003C078000020020218FBF00148FB00010EE
-:10DB8000ACE801800A00101027BD001827BDFF7007
-:10DB90003C088008AFB60080AFB5007CAFB1006C28
-:10DBA000AFBF008CAFBE0088AFB70084AFB40078C1
-:10DBB000AFB30074AFB20070AFB00068350500803D
-:10DBC0003C0780008CF2012890A40009ACE000849E
-:10DBD00090A60005309100FF0000A821000618273C
-:10DBE000306200010000B02114400067AFA0005077
-:10DBF00090A9000024050020312400FF10850016A4
-:10DC0000240A0050108A008C000000003C0C080020
-:10DC10008D8C00DC258B00013C010800AC2B00DC66
-:10DC20000E0015D6000000008FBF008C8FBE00884C
-:10DC30008FB700848FB600808FB5007C8FB40078DA
-:10DC40008FB300748FB200708FB1006C8FB000681A
-:10DC500003E0000827BD00900000000D3C1080008C
-:10DC6000AFA00030961F01168E1901043C1E002043
-:10DC700036130C00033EC0240018B82B00173140A7
-:10DC8000AFA600308E0E010433F4FFFF3C0F0040BE
-:10DC90000293802101CF68249213000D11A0004847
-:10DCA00034C40040326200201440000234860080F8
-:10DCB0000080302114C00093AFA600303C058008DE
-:10DCC00034A800809107000830E6004050C00006EC
-:10DCD0003C06800824090004122900A2240A00122C
-:10DCE000122A00293C06800834D401003C17800029
-:10DCF00096EF011A960D000E928E0008326B00040A
-:10DD000031F7FFFF01CD6004AFAC00548E14000466
-:10DD1000116000318E1E000834C300809079000825
-:10DD20003338004017000028000000008C730050BA
-:10DD300002939023064000063C0C80008C7E003449
-:10DD4000029E8023060200838EA200083C0C800005
-:10DD5000AD800044240200018FBF008C8FBE00887C
-:10DD60008FB700848FB600808FB5007C8FB40078A9
-:10DD70008FB300748FB200708FB1006C8FB00068E9
-:10DD800003E0000827BD00900E000D1A00002021BE
-:10DD90008FBF008C8FBE00888FB700848FB6008045
-:10DDA0008FB5007C8FB400788FB300748FB2007091
-:10DDB0008FB1006C8FB0006803E0000827BD0090B1
-:10DDC0000A000D7A00C020210E00163702802021A3
-:10DDD0001440FFDF3C0C80003C038008346300806B
-:10DDE0008C6200340282F82307E000170000000074
-:10DDF0003C1508008EB5310026B100013C01080039
-:10DE0000AC3131000E0014E0024020213C0B8008B0
-:10DE100035700080920A002502402021354200041E
-:10DE20000E0014EAA20200250E000C9E02402021E2
-:10DE30000A000DA7240200013C15080126B582D076
-:10DE40000A000D693C1080008C6600300286202399
-:10DE5000188000082409000C3C0808008D083100D7
-:10DE6000327300FC0000B821250700013C010800C6
-:10DE7000AC273100AFA900308C65003000B43823E6
-:10DE800018E000DB02E7502A1540FFDE000000002A
-:10DE900012E7002A02E768230287A02131B7FFFFBB
-:10DEA000326E000211C00034327F00103C14800832
-:10DEB00036900080920F000831F6004052C000CE2C
-:10DEC0008EA20008024020210E0014E02413001846
-:10DED000A2130009921800052419FFFE0240202118
-:10DEE0000319B8240E0014EAA2170005240400390F
-:10DEF000000028210E001612240600180A000DA7A3
-:10DF00002402000192B6000C3C0480083483008097
-:10DF10008C6700380016AB0036B10081024020212A
-:10DF20003225F0810E000C8D30C600FF3C0C8000C5
-:10DF3000AD8000440A000DA7240200013A6C0001E4
-:10DF4000318B00011560FFAF0287A0210A000DF898
-:10DF5000000000000040F809240400160A000DA784
-:10DF600024020001024020210E0017170200282180
-:10DF70000A000D5C8FBF008C13E0FF743C03800827
-:10DF8000346800808D0400388C66000403C61023BA
-:10DF90001C40FF6F3C0C800003C4282304A2000136
-:10DFA0000080F021AFB40010AFB70014AFA7001885
-:10DFB0003C1F800097E301208D0900309506005C2E
-:10DFC0008FB900548FAC00303062FFFF30D8FFFFB4
-:10DFD0000047702137EF40000338682B01CF5821EC
-:10DFE000018D5025AFAB0020AFA90028AFAA0030AB
-:10DFF000AFA90024AFA0002CAFBE003491070008E9
-:10E0000030E400081480008F020020218EA200045A
-:10E010000040F80927A400108FA900303128000221
-:10E0200055000001327300FE3C048008348C0080EF
-:10E03000918B0008316A0040514000128FA40024E7
-:10E040008C8D000411BE00BE240E00143265000148
-:10E0500010A0000C8FA400242404000C122400D46F
-:10E060002A27000D10E000CE2409000E2408000A23
-:10E0700052280001241600088FA200242444000125
-:10E08000AFA400248FA600143C03800834650080F0
-:10E090000086F8218CB10030ACBF003090B9004E42
-:10E0A0008CAE00303418FFFF0338780401CF6821AC
-:10E0B000ACAD00348FA600308FAC005430CA0008DD
-:10E0C00003CC58211140000CAFAB00588CA40020A9
-:10E0D0008FB000581090009430C600FF92A2000C40
-:10E0E0008FA700340240202100024B003528008019
-:10E0F0000E000C8D3105F0803C0C800835900080BE
-:10E100008E0B003001715023194000702659008099
-:10E110003C1808008F183198241FFF80033F782493
-:10E12000332D007F3C0680003C0E8004331100102C
-:10E13000ACCF00901220003401AE282190A3006BD8
-:10E14000546000323C10800824070001A0A7006B37
-:10E1500094C4007A2486000AA60600123C0D8008AA
-:10E1600035A5008090B10008322C004015800004D5
-:10E170003C038008326E000115C000620000000000
-:10E18000346400808C8F00208FB3005811F3000A94
-:10E19000346301008C7900000299C0231B000077D2
-:10E1A0008FA80058AC880020AC7400002414000133
-:10E1B000AC7E0004AFB4005016C000370000000071
-:10E1C0008FA40050148000300000000012E0000511
-:10E1D000000018218FA900303137000452E0FE9270
-:10E1E00000601021240300010A000D5B0060102173
-:10E1F0000A000DF9000038210040F8092404001736
-:10E200000A000DA7240200013C108008361000808F
-:10E2100024090001024020210E0014E0A60900128A
-:10E220009208002524050001AFA500503502000129
-:10E23000024020210E0014EAA20200250A000EA9C5
-:10E240003C0D800827A50038AFA800600E000CA880
-:10E25000AFA000381440FF6D8FA800608FA5003874
-:10E2600030B001005200FF6A8EA200048FA3003C70
-:10E270008D070058006720230483FF64AD03005816
-:10E280000A000E558EA200040E000C9E02402021B2
-:10E290000A000EC4000000000E0014E0024020211D
-:10E2A0003C05800834A30080024020210E0014EABF
-:10E2B000A076000902C03021240400370E00161297
-:10E2C000000028210A000EC28FA400508FA200185F
-:10E2D0005840FFA33C0D80080E0014E002402021AE
-:10E2E000920A0025240B0001AFAB00503542000418
-:10E2F000024020210E0014EAA20200250A000EA905
-:10E300003C0D80088CB600308EBE00082404001836
-:10E3100026D5000103C0F809ACB500308FB200303B
-:10E320000A000D5B324200043C07800094E5011AAC
-:10E3300050A0FF6A34C600100A000E8992A2000C99
-:10E34000122E002A2A2F001511E0001E2419001693
-:10E350002418000C5638FF3E326500013C1F80082F
-:10E3600093E3001B2410FFBD2416000E0070302420
-:10E37000A3E6001B0A000E65326500018C7F0000D9
-:10E3800017F4FF8D000000008C67000403C73023E2
-:10E3900004C1FF848FA800580A000EBF00000000CF
-:10E3A0001629FF368FA200240A000E7024160010D2
-:10E3B0002411000E52D1FF30241600100A000E6FF7
-:10E3C000241600165639FF22326500013C1F8008D2
-:10E3D00093E3001B2410FFBD2416001000703024AE
-:10E3E000A3E6001B0A000E65326500010A000E64F8
-:10E3F000241600123C0380008C6201B80440FFFE2A
-:10E4000024040800AC6401B803E000080000000028
-:10E4100030A5FFFF30C6FFFF3C0780008CE201B84B
-:10E420000440FFFE34E80180AD040000ACE40020AD
-:10E430003C048008948300483063FFFF1060001D97
-:10E440003C0B800024AA0012006A482B5120001ABD
-:10E45000240A000394F901208F890000240C001A7B
-:10E460003338FFFF2707FFFE0067782B39EE0001E6
-:10E4700000096B8201AE5824A10C000B116000470B
-:10E480008F830004A50700148F880004350700015E
-:10E49000AF87000430CC00405580000F3C0880005E
-:10E4A0003C0C800035840180A485000E0A000F9882
-:10E4B0008F8F000C240A00033564018030CC0040AB
-:10E4C0008F8900008F870004A08A000B5180FFF520
-:10E4D0003C0C80003C088000950301203C0880082B
-:10E4E000951800403079FFFF272EFFFE330FFFFF06
-:10E4F00001CF682B11A0000301C02021950200402C
-:10E500003044FFFF3C0B800000A4502335650180A0
-:10E51000A4A4000EA4AA00248F8F000C3C05800048
-:10E5200034AE01802418000230ED8000A5D8000C24
-:10E53000A5C90010ADCF0028A5C6000811A0000E87
-:10E540003C04800094AA01163142FFFC24480004D8
-:10E55000010518218C7940003326FFFF14C0000705
-:10E56000240EBFFF3C0BFFFF35657FFF00E538241D
-:10E57000AF8700043C048000240EBFFF348C018070
-:10E5800000EE6824A58D0026AD89002C3C07100004
-:10E59000AC8701B803E00008000000002402FFFE81
-:10E5A000006238240A000F76AF8700043C05800023
-:10E5B00034A400708C8A000090A601128F840000A1
-:10E5C00027BDFFF030C300FF000318823082010036
-:10E5D00000003821104000392466000330874000D5
-:10E5E00050E0003930882000000610800045C82126
-:10E5F0008F2F40002478000400187080AFAF000017
-:10E6000001C568218DAC4000AFAC000494AB01168D
-:10E610003169FFFC012540218D054000AFA50008B0
-:10E620008FA9000800003021000028213C070800C5
-:10E6300024E701000A000FE92408000890420000C6
-:10E6400024A500012CAD000C0062C8210019C08077
-:10E65000030778218DEE000011A0000600CE3026C1
-:10E6600003A5102114A8FFF500051A005520FFF49A
-:10E67000904200003C048000348700703C05080094
-:10E680008CA531048CE300002CA8002011000009A7
-:10E69000006A3823000558803C0C0800258C31089E
-:10E6A000016C482124AA0001AD2700003C010800AC
-:10E6B000AC2A3104AF86000C2407000100E01021D1
-:10E6C00003E0000827BD00101100FFFC0000382106
-:10E6D00000066080018558218D6440002469000493
-:10E6E00000093880AFA4000000E518218C664000C6
-:10E6F000AFA000080A000FD9AFA6000427BDFFD8BD
-:10E70000AFB20018AFB00010AFBF0024AFB400200C
-:10E71000AFB3001CAFB100148F8700003C04800031
-:10E720009483010E30E24000000080211040001070
-:10E730003072FFFF3C06002000E6282410A0000DE8
-:10E7400030EA80008F8800042409BFFF00E93824E4
-:10E7500035031000AF87000030F120001620000BB9
-:10E760003C1400042418FFBF0A001038007810245D
-:10E7700030EA8000154000863C0C002030F120007B
-:10E780001220FFF88F8300043C14000400F4982446
-:10E790001260FFF52418FFBF3462004030F9010019
-:10E7A0001320000FAF8200043C02002000E2F82496
-:10E7B00013E000053C0B80003C04000400E4182436
-:10E7C000106000CF00000000956A011E9569011CD1
-:10E7D0003146FFFF0009440000C82825AF85000C22
-:10E7E0003C0E800095CD010C8DC44000340CFFFF21
-:10E7F000108C00B031A5FFFF308F010055E0000103
-:10E800002410001030F110005220000836110001D1
-:10E8100030F300201660009F3C18100000F8A02480
-:10E82000168000963C040C003611000130E801000F
-:10E830001500000B3C0A00018F88000431094000DC
-:10E840001520000800EA30243C0C1F0100EC58247D
-:10E850003C0A1000516A00AE30AD02003C0A0001D3
-:10E8600000EA302414C000953C05100000E5202487
-:10E8700000004021108000070000902100079E0248
-:10E880003272000F001278803C0E080125CE828083
-:10E8900001EE40218F940018128000470220802151
-:10E8A00010800091000000003C0980009539010EA5
-:10E8B00091030000022030213338FFFF27050004B8
-:10E8C000106000080000A021241F0003107F013AFF
-:10E8D00024040002910C00011184011830EA004068
-:10E8E0000012A1C08F92001C524000013626004049
-:10E8F0003C1380008E6F400031F10100122000CBEC
-:10E9000030D1FFFB3C1808008F18002430D20004DF
-:10E910003306000414C000CC30B0FFFF56400001A5
-:10E920003631000402802021020028210E000F55FC
-:10E93000022030211640000D0000202136650180A4
-:10E940003C0480008C9301B80660FFFE241920006F
-:10E9500024140002A4B90008A0B4000BA4A0001065
-:10E960003C051000AC8501B8000020218FBF0024B9
-:10E970008FB400208FB3001C8FB200188FB1001429
-:10E980008FB000100080102103E0000827BD002890
-:10E9900000EC58241160FF7A30F120008F8D0004C4
-:10E9A0003C0FFFFF35EE7FFF00EE382435A38000DB
-:10E9B0000A001027AF8700003C0208008C42003894
-:10E9C0003C040800248400381040004B2449FFFF19
-:10E9D0003C038000946C010E318BFFFF110000A0FE
-:10E9E000257300043C1008008E1000301200000A4D
-:10E9F00030E601008F8A00043143400010600006B9
-:10EA00003C0F0F0000EF70243C0D010001AE402BC5
-:10EA1000110000DF3265FFFF10C000693C140F00D9
-:10EA200000F428243C18020010B800658F99000CEF
-:10EA30003270FFFF03299824026490219249000458
-:10EA400025270004000721C00200282136260002E5
-:10EA50000E000F55000000008FBF00248FB400206F
-:10EA60008FB3001C8FB200188FB100148FB000104C
-:10EA70000000102103E0000827BD00283C020BFF26
-:10EA800000E41824345FFFFF03E3C82B5320FF6723
-:10EA9000361100013C0608008CC6002C361100051A
-:10EAA00024D000013C010800AC30002C0A00105DAD
-:10EAB00030E801000A0010522410002002402821F2
-:10EAC0003C1208008E5200D824040080264D00011C
-:10EAD0003C010800AC2D00D80E000F5524060003A1
-:10EAE0000A0010E88FBF00243C0808012508828036
-:10EAF0000A00107C3C0980000A0010C50000482173
-:10EB00000E000FBC000000000A0010498F870000B3
-:10EB100015A0FF533C0A00012645000430AAFFFF60
-:10EB2000362600023C0380008C7201B80640FFFECE
-:10EB30008F85000834690180AD20000010A000AF6F
-:10EB40003C048000254F001200AF702B51C000AC78
-:10EB500024030003947801202414001A30F14000AB
-:10EB60003313FFFFA134000B122000B62663FFFE13
-:10EB700000A3C82B572000B4241FFFFE3508000156
-:10EB8000A5230014AF8800043C108000240CBFFFB4
-:10EB9000010C4824240B000236080180A50B000C50
-:10EBA000A50A000EA5060008A5090026A507001065
-:10EBB0003C071000AE0701B80A0010E88FBF002420
-:10EBC0003C0308008C6300D02E45000C001221C0CD
-:10EBD000386B00012D6200010045F82417E0FF9A10
-:10EBE0003270FFFF264CFFFC2D840004548000503F
-:10EBF00000002021386A00022D43000100658024B6
-:10EC00001600004A3270FFFF00076A420012702BA4
-:10EC100001AE40245500006300002021001221C0F5
-:10EC2000020028210A0010E53626000234DF000227
-:10EC30000280202133E6FFFF0E000F5530A5FFFFB5
-:10EC40000A0010AC00002021240401000200282149
-:10EC50000E000F55022030210A001098000000001D
-:10EC60008C66400030CF010011E0003D30F801001B
-:10EC70003C1208008E5200241300001132340004AC
-:10EC80003C1F0F0000FFC8243C0502001325000CA8
-:10EC90008F8C000C022030213265FFFF018958243F
-:10ECA00001641021904900043230FFFB2411FFFE63
-:10ECB000252700040E000F55000721C002519024A3
-:10ECC0002404000112440052324300011460005831
-:10ECD00002003021324A0004114000048F8D0000F0
-:10ECE00031A808001500005A3265FFFF1680FF5B4F
-:10ECF0008FBF00243C138000366501803C048000F7
-:10ED00008C9001B80600FFFE24062000240F0002AC
-:10ED1000A4A60008A0AF000BA4A000103C0E100099
-:10ED2000AC8E01B80A0010E88FBF0024000020213B
-:10ED3000020028210A0010E5362600021140FEE9F3
-:10ED40000000A021952E0110950D000231C8FFFF93
-:10ED500051A8FEE40012A1C00A00108B8F92001C83
-:10ED60003C0508008CA5002430B800015300FF3B8F
-:10ED70008FBF00243265FFFF3626000200002021ED
-:10ED80000E000F55000000000A0010E88FBF00249D
-:10ED9000362600020E000F55240400800A0010E8F9
-:10EDA0008FBF0024020028210E000F553226FFFBE2
-:10EDB0000A001159001221C0910300012402000130
-:10EDC0001062FEEA24040001241000021470FEC543
-:10EDD0000000A02130E300401060FEC38F92001CB1
-:10EDE000952B0110950900023167FFFF1127FEE006
-:10EDF0008FBF00240A00108B0000000024030003D2
-:10EE000034820180A043000B0A0011343C108000C2
-:10EE100032140004168000033265FFFF3612000230
-:10EE20003250FFFF020030210A0011B10000202102
-:10EE3000000020210E000F553265FFFF0A001186E9
-:10EE40003210FFFB241FFFFE0A001132011F402475
-:10EE5000020030210E000F55240401000A00118C1D
-:10EE60000000000027BDFFC8AFB00010AFBF0034E6
-:10EE70003C10600CAFBE0030AFB7002CAFB600281E
-:10EE8000AFB50024AFB40020AFB3001CAFB2001880
-:10EE9000AFB100148E0C5000240DFF7F3C058000A4
-:10EEA000018D5824356A380C24090003AE0A50003D
-:10EEB000ACA900083C010800AC2000200E0017435C
-:10EEC000000000003C0560168CA700003C08FFFF16
-:10EED0003C06001034C3805100E820243C02535308
-:10EEE000AE03537C1082026134A37C008C74007CDE
-:10EEF0008C7500783C116000362420203C05080108
-:10EF000024A581142406000A3C1180003C13000251
-:10EF10003C12600CAF950010AF9400140E0015EC7D
-:10EF2000363E0180AE5353FC8E3000003216000393
-:10EF300012C0FFFD3217000116E000583206000231
-:10EF400010C0FFF93C0480008C8F01402410004069
-:10EF5000AC8F00208C9201480012760231C3007001
-:10EF60001070013D2C67004150E00008240400604F
-:10EF7000241500201075000E3C0340003C07800063
-:10EF8000ACE301780A00121B000000001464FFFBD0
-:10EF90003C0340000E001F5D000000003C034000E9
-:10EFA0003C078000ACE301780A00121B000000005F
-:10EFB0008C830148241400043487018000034C0230
-:10EFC000312500FF8C83014010B4017124BFFFFA8A
-:10EFD0002FF90006532000123C0580008C86014466
-:10EFE000241600FF30A500FF30CB00FF30CA00FF21
-:10EFF000115601BC256800042402000910A201AAD0
-:10F0000028AC000A118001962413000A240D000880
-:10F0100010AD00148F850018000819C03C05800051
-:10F020008CA801B80500FFFE24170002ACE3000025
-:10F03000A4E90008A0F7000B8CB401483C091000BB
-:10F040003C034000A4F400108CA40144ACE4002470
-:10F050003C078000ACA901B8ACE301780A00121BA0
-:10F060000000000000067A020008A8803C040801A5
-:10F070002484828024AE000102A4902131E500FFA7
-:10F0800024100001A24F000014B0FFE3AF8E00185F
-:10F09000000819C00A001258AF85001C8E340128E0
-:10F0A0003C028008AE3400208E2401048E2301002F
-:10F0B000945F0048AF840000AF83000433F9FFFF82
-:10F0C0000E000F4EAF9900083C1808008F1800C0C2
-:10F0D000130000248F8700003C0708008CE700C461
-:10F0E00024E600013C010800AC2600C43C0380007B
-:10F0F0008C6401243C076020ACE400140000000094
-:10F100003C0680003C154000ACD5013800000000F2
-:10F110005280FF8B32060002268C0140268D008033
-:10F120002409FF800189282401A99824001359404B
-:10F1300031A2007F0005B140318A007F3C1F2000D2
-:10F1400037E800020162C02502CAC8250328A025AD
-:10F150000308B825ACD70830ACD408300A00122117
-:10F16000320600023C05001000E54024150000A610
-:10F170008F8300043C0C08008D8C00203C0D800027
-:10F1800095AA010E258B000130E940003C010800E2
-:10F19000AC2B00203155FFFF112000B6000090215C
-:10F1A0003C0F002000EF702411C000B330F7800046
-:10F1B0008F9300042416BFFF00F638243663100036
-:10F1C000AF87000030E22000104000B62405FFBFEA
-:10F1D0003C08000400E8302410C000020065102440
-:10F1E0003462004030E901001120000EAF820004BB
-:10F1F0003C0B002000EB5024114000043C0D0004A7
-:10F2000000ED602411800139000000009637011ED6
-:10F210009636011C32EFFFFF00169C0001F37025AB
-:10F22000AF8E000C9639010C8E2440003418FFFF7D
-:10F23000109800CA3325FFFF309F010057E00001FE
-:10F240002412001030E31000106000133653000148
-:10F2500030E400201480000A3C06100000E6102470
-:10F260001040000D3C0C0C003C0B0BFF00EC50243C
-:10F270003569FFFF012A402B1100000830EE010024
-:10F280003C0D08008DAD002C3653000525B2000161
-:10F290003C010800AC32002C30EE010015C0000B20
-:10F2A0003C0600018F880004310F400055E0000843
-:10F2B00000E628243C181F0100F8B8243C16100072
-:10F2C00052F6010E30B902003C06000100E6282487
-:10F2D00014A000A43C1F100000FF202400004021C7
-:10F2E000108000070000A82100075E023175000FA2
-:10F2F000001550803C0208012442828001424021D6
-:10F300008F8C001811800069026090211480000326
-:10F310003C0980003C080801250882809532010ED6
-:10F3200091030000026030213244FFFF2485000475
-:10F33000106000080000B821240D0003106D0122A8
-:10F34000241600029117000112F6002630F8004042
-:10F350000015B9C08F82001C504000013666004085
-:10F360003C1680008ECA400031530100126000C775
-:10F3700030D500043C0B08008D6B002430D3FFFB1C
-:10F380003166000414C0010A30B2FFFF56A000012C
-:10F390003673000402E02021024028210E000F55A0
-:10F3A0000260302116A0000D0000202136C501802A
-:10F3B0003C0480008C8C01B80580FFFE240D2000E9
-:10F3C00024120002A4AD0008A0B2000BA4A00010FB
-:10F3D0003C051000AC8501B8000020210A00135F35
-:10F3E000008010211300FFDB0000B821953F0110C1
-:10F3F0009519000233E8FFFF5328FFD60015B9C066
-:10F400000A0013278F82001C2413BFFF0073682497
-:10F4100011A00007240E87FF006E48241520000A63
-:10F420003C0F006000EF9024124000070000000035
-:10F430000E000D34000000001040FF323C0680003A
-:10F440000A00128D3C0380000E0014C90000000069
-:10F450000A00135F000000000E0014EF000000001F
-:10F460003C0340003C078000ACE301780A00121B1B
-:10F470000000000030F7800012E0FF528F8300048C
-:10F480003C19002000F9C0241300FF4E8F9F000498
-:10F490003C04FFFF34837FFF00E338240A0012C1DD
-:10F4A00037E380000A0012CA006510243C040800FB
-:10F4B0008C840038148000022489FFFF000048215A
-:10F4C0003C038000946F010E31EEFFFF110000EB52
-:10F4D00025D600043C0308008C6300301060000A4D
-:10F4E00030EA01008F9800043317400012E0000654
-:10F4F0003C020F0000E2F8243C190100033F402BBE
-:10F50000110000D532C5FFFF114000303C0C0F0048
-:10F5100000EC58243C0602001166002C000000009C
-:10F520008F95000C3C0D080025AD003832D2FFFF4E
-:10F5300002A9282400ADB02192C7000424E90004E8
-:10F54000000921C002402821366600020E000F5536
-:10F55000000000000A00135F000010210A0012E200
-:10F56000241200203C1908008F3900D802A028215D
-:10F5700024040080273800013C010800AC3800D882
-:10F580000E000F55240600030A00135F000010212F
-:10F590008C84014000E028213C0380008C7701B876
-:10F5A00006E0FFFE2408001CACA40000A0A8000B8D
-:10F5B0003C181000AC7801B83C0340003C078000C8
-:10F5C000ACE301780A00121B000000003C030800B5
-:10F5D0008C6300D02EA5000C001521C0386F0001EF
-:10F5E0002DF200010245702415C0FFD632D2FFFF74
-:10F5F00026B7FFFC2EE40004148000080000202140
-:10F60000386800022D180001030518241060000658
-:10F610000007FA4232D2FFFF0000202102402821D9
-:10F620000A0013A4366600020015102B03E2C8245A
-:10F630001720000532D2FFFF001521C0024028210B
-:10F640000A0013A43666000200002021024028218F
-:10F650000E000F553266FFFB0A0013E0001521C0B3
-:10F6600010B3006A000860802406000B14A6FE6B2D
-:10F67000000819C0000828803C15080126B58280C2
-:10F6800000B530210A001258A0C0000134D5000294
-:10F6900002E0202130A5FFFF0E000F5532A6FFFF2C
-:10F6A0000A001348000020210008B8803C0308012C
-:10F6B0002463828002E31021905400001280FE57E0
-:10F6C000000819C0A04000008F9900182738FFFFDC
-:10F6D0001700FE52AF980018000819C00A0012580F
-:10F6E000AF80001C0A00124F240800030E000FBC5C
-:10F6F000000000000A0012DA8F8700001720FEF3D6
-:10F700003C06000126BF000433E5FFFF3666000219
-:10F710003C0380008C7501B806A0FFFE8F890008AD
-:10F720003C04800034930180AE60000011200099F9
-:10F73000240F000324AA0012012A102B1040009568
-:10F7400000000000946D01203C1280002403001A88
-:10F7500031ACFFFF364A018030EB4000A143000B83
-:10F760001160008F2583FFFE0123702B15C0008DD3
-:10F770002409FFFE35080001A5430014AF880004EA
-:10F780002417BFFF0117B02424080002A7C8000CEB
-:10F79000A7C5000EA7C60008A7D60026A7C7001059
-:10F7A0003C071000AE2701B80A00135F00001021CB
-:10F7B00024040100024028210E000F550260302170
-:10F7C0000A00133400000000910300012415000119
-:10F7D0001075FF0224040001240E0002146EFEDDE9
-:10F7E0000000B82130E300401060FEDB8F82001C77
-:10F7F00095270110950F000230E9FFFF11E9FF0E78
-:10F80000008010210A0013278F82001C3C0F080182
-:10F8100025EF8280018F702100069202A1D20001A3
-:10F820003C1F60008FED1820241000010110980487
-:10F830003C0208012442828201B3B025018250219A
-:10F8400000065C02000819C0A54B0000AFF61820A6
-:10F850000A0012593C058000366600020E000F5562
-:10F86000240400800A00135F000010218CAE000405
-:10F870003C0F60000A00120C01CF18218C6640007A
-:10F8800030CA01001140003730EB01003C15080080
-:10F890008EB5002411600013327700043C0D0F0078
-:10F8A00000ED28243C0C020010AC000E8F84000CEC
-:10F8B0003C0F080025EF00380260302100899024B9
-:10F8C000024F702191C7000432C5FFFF3272FFFB67
-:10F8D00024E90004000921C00E000F552413FFFE87
-:10F8E00002B3A8242403000112A3003032B800019F
-:10F8F0001300000732A8000402403021000020213C
-:10F900000E000F5532C5FFFF3252FFFB32A8000434
-:10F91000110000048F9F000033F908005720002BCE
-:10F9200032C5FFFF16E0FEC4000010213C16800027
-:10F9300036C401803C0580008CA201B80440FFFE63
-:10F94000240B200024060002A48B0008A086000BD4
-:10F95000A48000103C0A1000ACAA01B80A00135F92
-:10F96000000010213C0508008CA5002430AC0001EB
-:10F970005180FEB10000102132C5FFFF3666000243
-:10F98000000020210E000F55000000000A00135F48
-:10F9900000001021A3CF000B0A0014322417BFFF70
-:10F9A0002409FFFE0A0014300109402432550004E6
-:10F9B00016A0000332C5FFFF3657000232F2FFFFE8
-:10F9C000024030210A0014B2000020210240302100
-:10F9D0000E000F55240401000A00149A00000000D4
-:10F9E0003C0380008C6401003082003E144000081B
-:10F9F00000000000AC6000488C66010030C507C004
-:10FA000010A0000500000000AC60004CAC6000508D
-:10FA100003E0000824020001AC600054AC60004028
-:10FA20008C6801003107380010E0FFF90000000089
-:10FA30002402000103E00008AC6000443C03900095
-:10FA400034620001008220253C038000AC64002069
-:10FA50008C65002004A0FFFE0000000003E0000809
-:10FA6000000000003C028000344300010083202598
-:10FA700003E00008AC44002027BDFFD8AFB100145C
-:10FA80003C048000AFBF0020AFB3001CAFB2001831
-:10FA9000AFB000108C9201408C9001482402000EFF
-:10FAA00000108C02322300FF106200590204282447
-:10FAB0002866000F10C00013286A003724070006CC
-:10FAC0001067008E286800075100002D24040009EB
-:10FAD000106000783C06800024090001106900B025
-:10FAE000000000000000000D8FBF00208FB3001C3D
-:10FAF0008FB200188FB100148FB0001003E000081F
-:10FB000027BD002811400059240D0038286B00350E
-:10FB1000116000053C058000240C001F146CFFF1EF
-:10FB2000000000003C0580008CB801B80700FFFE13
-:10FB300034B90180AF320000241F000124120002FA
-:10FB40003C021000AF200004A7310008A33F000AC8
-:10FB5000A332000BA7300010AF200024AF200028F4
-:10FB6000ACA201B88FBF00208FB3001C8FB2001869
-:10FB70008FB100148FB0001003E0000827BD0028EB
-:10FB8000106400232405000B1465FFD63218FFFF14
-:10FB9000170000203C0580008F93FEEC927F00054B
-:10FBA00033F900041720FFCF000000000E0014E01E
-:10FBB00002402021926900050240202135280004DE
-:10FBC0000E0014EAA26800059267000530E2000406
-:10FBD00014400002000000000000000D926B0000C5
-:10FBE00024060020316A00FF1546000A3C0580000B
-:10FBF0008CA401B80480FFFE34AD0180240E000502
-:10FC00003C0C1000ADB20000A1AE000BACAC01B8D2
-:10FC10003C0580008CA301B80460FFFE34AF018076
-:10FC200024130002ADF20000ADF20004A5F10008BB
-:10FC3000A1F3000AA1F3000BA5F00010ADE0002431
-:10FC40008CB101443C101000ADF10028ACB001B8FB
-:10FC50008FBF00208FB3001C8FB200188FB100142B
-:10FC60008FB0001003E0000827BD0028106DFFAD25
-:10FC7000240E0080146EFF9B000000003C058000F5
-:10FC80008CA301B80460FFFE34AF0180241200028F
-:10FC9000A1F2000BA5F10008A5F000108CB30144FF
-:10FCA0003C021000A5F30012ACA201B80A00152B0B
-:10FCB0008FBF00208CC301B80460FFFE34D30180E5
-:10FCC000AE720000AE60000424120001A6710008AC
-:10FCD00024110002A272000AA271000BA67000108B
-:10FCE0008CD001443C0F1000AE700024AE600028A0
-:10FCF000ACCF01B80A0015668FBF00203C0380001E
-:10FD00008C6601B804C0FFFE346201803C06080125
-:10FD100090C682C0AC52000010C000030000382121
-:10FD20003C0708018CE782C83C05800034AA0180AA
-:10FD30002404000234CC0001AC470004A5510008A3
-:10FD4000A14C000AA144000BA55000108CAB01444B
-:10FD50000000202101402821AD4B002410C00003E9
-:10FD60008FBF00203C0408018C8482C48FB3001C28
-:10FD70008FB200188FB100148FB000103C0E10002D
-:10FD80003C0D800027BD0028ACA40028ADAE01B812
-:10FD90003C010801A02082C003E000080000000030
-:10FDA00010A0000B3C0680008C980144241900022E
-:10FDB0003C010801A03982C03C010801AC3282C874
-:10FDC0003C010801AC3882C40A0015668FBF0020D0
-:10FDD0008CDF01B807E0FFFE34C701802409000270
-:10FDE000ACF20000ACF20004A4F10008A0E9000AA3
-:10FDF000A0E9000BA4F00010ACE000248CC8014482
-:10FE00003C021000ACE80028ACC201B80A0015663C
-:10FE10008FBF002027BDFFE8AFBF00100E000F4EC0
-:10FE2000000000003C0280008FBF00100000202175
-:10FE3000AC4001800A00101027BD00183084FFFF7D
-:10FE400030A5FFFF1080000700001821308200015C
-:10FE50001040000200042042006518211480FFFBBE
-:10FE60000005284003E000080060102110C00007D2
-:10FE7000000000008CA2000024C6FFFF24A500049F
-:10FE8000AC82000014C0FFFB2484000403E00008DF
-:10FE90000000000010A0000824A3FFFFAC860000B3
-:10FEA00000000000000000002402FFFF2463FFFFA9
-:10FEB0001462FFFA2484000403E00008000000003C
-:10FEC00027BDFFE8AFBF0014AFB000100E0014E074
-:10FED000008080213C0480083483008090650025E8
-:10FEE0000200202134A200200E0014EAA0620025A6
-:10FEF000020020218FBF00148FB000100A000C9E5A
-:10FF000027BD00183C03800027BDFFF83462018044
-:10FF1000AFA20000308C00FF30AD00FF30CE00FFFC
-:10FF20003C0B80008D6401B80480FFFE00000000DF
-:10FF30008FA900008D6801288FAA00008FA70000FC
-:10FF40008FA400002405000124020002A085000AFD
-:10FF50008FA30000359940003C051000A062000B03
-:10FF60008FB800008FAC00008FA600008FAF00009C
-:10FF700027BD0008AD280000AD400004AD8000247E
-:10FF8000ACC00028A4F90008A70D0010A5EE0012CF
-:10FF900003E00008AD6501B83C06800827BDFFE816
-:10FFA00034C50080AFBF001090A7000924020012E2
-:10FFB00030E300FF1062000B008030218CA800505D
-:10FFC00000882023048000088FBF00108CAA003412
-:10FFD000240400390000282100CA48230520000518
-:10FFE000240600128FBF00102402000103E0000865
-:10FFF00027BD00180E001612000000008FBF001071
-:020000040001F9
-:100000002402000103E0000827BD001827BDFFC837
-:10001000AFB1002C00A08821AFB2003027A500109E
-:100020000080902102202021AFBF0034AFB0002813
-:100030000E000CA8AFA000101440009B3C078008E5
-:1000400034E400809086000830C5000814A00069E0
-:100050008FA700103C18800837100080920F00080E
-:1000600031EE000815C00002240800030000402102
-:100070003C0B800891650011916A00123566008082
-:100080008CDF0054314900FF0128202130A300FFFC
-:10009000000410800062282100BFC82B1320000834
-:1000A0000000000094D0005C8CCF0054320DFFFFA4
-:1000B00001E5702301AE602B118000940000000068
-:1000C00094D9005C3323FFFF30FF000413E0007479
-:1000D000000830808FA8001C0068102B5040004F93
-:1000E00030E30004006610232C46008010C000029C
-:1000F00000408021241000800E0014E002402021E6
-:100100003C0380083466008024070001ACC7000C63
-:1001100090C800080010684034670100311F007F5C
-:10012000A0DF00088E39000427380001ACD8003069
-:10013000A4D0005C8CCF003C9630000E01F0702102
-:10014000ACCE00208CCC003C018D5821ACCB001CE7
-:100150008E2A0004ACEA00008E290008ACE90004F5
-:100160008FA5001030A400085480003293A6002010
-:10017000A0C0004E90C9004E2402FFDF3C1880084A
-:10018000A0E9000890C50008370D0080240A00503F
-:1001900000A22024A0C400088E390008ADB90038A0
-:1001A0008F0F00148DB0003001F07021ADAE00341F
-:1001B00091AC0000318B00FF116A002C2645010034
-:1001C0000E0014EA024020212404003800002821F7
-:1001D0000E0016122406000A8FBF00348FB20030C2
-:1001E0008FB1002C8FB000282402000103E000082A
-:1001F00027BD003830E801001100003D8FA3001436
-:100200008C8A0058006A48230520FF933C18800818
-:10021000AC8300580A0016668FA700102407021846
-:100220001060FFB100E610238FA2001C0A00168B9D
-:10023000004610233C188008370D0080A0E6000817
-:100240008E390008240A0050ADB900388F0F001411
-:100250008DB0003001F07021ADAE003491AC0000E3
-:10026000318B00FF156AFFD6264501002406FF806A
-:1002700000A610243C098000AD2200288E2700082B
-:1002800030A3007F3C04800C0064F821AFE700D06D
-:100290008E280008AF9F00280A0016C1AFE800D4DE
-:1002A0000A0016882C6202188E2300083C0480087D
-:1002B00034820080AC430054024020210E0016011D
-:1002C000AC400030240400382405008D0E001612C6
-:1002D000240600128FBF00348FB200308FB1002C83
-:1002E0008FB000282402000103E0000827BD003879
-:1002F000AC800058908C0008240DFFF7018D582425
-:10030000A08B00080A0016668FA700108CD8005436
-:100310000A0016830305182327BDFFE8AFBF0010AE
-:1003200090A6000D30C7001010E0000C00804021A6
-:100330003C0280088C4400048CA300081064000870
-:1003400030C9000430C5000410A0001C8FBF00108D
-:100350002402000103E0000827BD001830C9000492
-:100360001120001030CB001210E0FFF98FBF0010F9
-:100370003C0880088CA700088D06000414E6FFF5F1
-:1003800024020001240400382405008D0E001612FA
-:10039000240600128FBF00102402000103E00008B1
-:1003A00027BD0018240A0012156AFFE98FBF00104C
-:1003B000010020210A00165427BD0018000020214A
-:1003C0000A000D1A27BD00183C05080024A55D5041
-:1003D0003C04080024847B103C02080024425D5841
-:1003E000240300063C010801AC2582D03C01080131
-:1003F000AC2482D43C010801AC2282D83C01080123
-:10040000A02382DC03E000080000000003E00008F5
-:10041000240200013C028000308800FF3447018044
-:100420003C0680008CC301B80460FFFE00000000A1
-:100430008CC501282418FF803C0D800A24AF0100E0
-:1004400001F8702431EC007FACCE0024018D202116
-:10045000ACE50000948B00DA350960002408000246
-:10046000316AFFFFACEA000424020001A4E900089D
-:10047000A0E8000BACE000243C071000ACC701B8BA
-:10048000AF84002803E00008AF8500588C99000471
-:100490008F8D00282409FFBF0325C023AC980004DA
-:1004A00091AF00C42403FFEF31EE007FA1AE00C482
-:1004B0008C8C0020938B00348F860028358A0002B4
-:1004C000AF8B004CA7800048AC8A0020A4C000ACD1
-:1004D00090C800C401093824A0C700C48F84002834
-:1004E000AC8000DC908500C400A3102403E0000869
-:1004F000A08200C43C028000344501803C0480009E
-:100500008C8301B80460FFFE8F8900582407608344
-:1005100024060002ACA900008C880124ACA80004C9
-:10052000A4A70008A0A6000B3C05100003E00008EB
-:10053000AC8501B8938800348F89004C8F820028E5
-:1005400030C600FF0109382330E900FF01221821DD
-:1005500030A500FF2468007810C000020124382173
-:100560000080382130E400031480000330AA000327
-:100570001140000D312B000310A0000900001021D4
-:1005800090ED0000244E000131C200FF0045602BB9
-:10059000A10D000024E700011580FFF925080001E6
-:1005A00003E00008000000001560FFF300000000F9
-:1005B00010A0FFFB000010218CF80000245900045B
-:1005C000332200FF0045782BAD18000024E700041B
-:1005D00015E0FFF92508000403E000080000000012
-:1005E00093850034938800448F87004C00043200C8
-:1005F0003103007F00E5102B30C47F001040000F56
-:10060000006428258F8400283C0980008C8A00DC47
-:10061000AD2A00A43C03800000A35825AC6B00A0C9
-:100620008C6C00A00580FFFE000000008C6D00AC0B
-:10063000AC8D00DC03E000088C6200A80A0017D62D
-:100640008F840028938800453C0280000080502160
-:10065000310300FEA383004530ABFFFF30CC00FF29
-:1006600030E7FFFF344801803C0980008D2401B849
-:100670000480FFFE8F8D005824180016AD0D000079
-:100680008D2201248F8D0028AD0200048D59002099
-:10069000A5070008240201B4A119000AA118000B43
-:1006A000952F01208D4E00088D4700049783004848
-:1006B0008D59002401CF302100C7282100A3202319
-:1006C0002418FFFFA504000CA50B000EA5020010C6
-:1006D000A50C0012AD190018AD18002495AF00D874
-:1006E0003C0B10002407FFF731EEFFFFAD0E002892
-:1006F0008DAC0074AD0C002CAD2B01B88D460020E4
-:1007000000C7282403E00008AD4500208F8800289A
-:100710000080582130E7FFFF910900C63C028000AD
-:1007200030A5FFFF312400FF00041A0000675025A8
-:1007300030C600FF344701803C0980008D2C01B891
-:100740000580FFFE8F820058240F0017ACE20000E6
-:100750008D390124ACF900048D780020A4EA00084A
-:10076000241901B4A0F8000AA0EF000B9523012082
-:100770008D6E00088D6D00049784004801C35021E0
-:10078000014D602101841023A4E2000CA4E5000EB9
-:10079000A4F90010A4E60012ACE000148D78002447
-:1007A000240DFFFFACF800188D0F006CACEF001C9F
-:1007B0008D0E00683C0F1000ACEE0020ACED002464
-:1007C000950A00AE240DFFF73146FFFFACE6002886
-:1007D000950C00709504007231837FFF0003CA00FE
-:1007E0003082FFFF0322C021ACF8002CAD2F01B8EE
-:1007F000950E00728D6A002000AE3021014D282434
-:10080000A506007203E00008AD6500203C028000F0
-:10081000344601803C0580008CA301B80460FFFED3
-:1008200024090018ACC40000A0C9000B8F88002860
-:100830003C041000950700AEA4C70010ACC0003007
-:1008400003E00008ACA401B83C02800034450180FC
-:100850003C0480008C8301B80460FFFE8F8A003066
-:10086000240600199549001C3128FFFF000839C0F3
-:10087000ACA70000A0A6000B3C05100003E0000898
-:10088000AC8501B88F8700380080402130C400FF5C
-:100890003C0680008CC201B80440FFFE8F890058DE
-:1008A0009383005434996000ACA90000A0A3000514
-:1008B0008CE20010240F00022403FFF7A4A200061C
-:1008C000A4B900088D180020A0B8000AA0AF000B42
-:1008D0008CEE0000ACAE00108CED0004ACAD00144A
-:1008E0008CEC001CACAC00248CEB0020ACAB0028E2
-:1008F0008CEA002C3C071000ACAA002C8D090024C7
-:10090000ACA90018ACC701B88D05002000A32024B5
-:1009100003E00008AD040020938500542403000187
-:1009200027BDFFE800A330042CA20020AFB00010C8
-:10093000AFBF001400C01821104000132410FFFEA8
-:100940003C0708008CE7319000E610243C0880004A
-:100950003505018014400005240600848F89002895
-:10096000240A00042410FFFFA12A00EC0E001872D4
-:1009700000000000020010218FBF00148FB0001093
-:1009800003E0000827BD00183C0608008CC631941F
-:100990000A0018A400C310248F87003027BDFFE091
-:1009A000AFB20018AFB10014AFB00010AFBF001C61
-:1009B00030D000FF90E6000D00A08821008090213B
-:1009C00030C5007FA0E5000D8F8500288E2300181C
-:1009D0008CA200C01062002E240A000E0E00189790
-:1009E000A38A00542409FFFF104900222404FFFFBA
-:1009F00052000020000020218E2600003C0C001038
-:100A000000CC5824156000393C0E000800CE682444
-:100A100055A0003F024020213C18000200D880244D
-:100A20001200001F3C0A00048F8700308CE2001483
-:100A30008CE300108CE500140043F82303E5C82B79
-:100A400013200005024020218E24002C8CF1001080
-:100A5000109100310240202124020012A382005490
-:100A60000E0018972412FFFF105200022404FFFF0B
-:100A7000000020218FBF001C8FB200188FB100141E
-:100A80008FB000100080102103E0000827BD002077
-:100A900090A800C4350400200A0018CDA0A400C40A
-:100AA00000CA48241520000B8F8B00308F8D00303A
-:100AB0008DAC00101580000B024020218E2E002CE2
-:100AC00051C0FFEC00002021024020210A0018E85C
-:100AD000240200178D66001050C0FFE600002021A0
-:100AE000024020210A0018E82402001102402021BF
-:100AF000240200150E001897A3820054240FFFFF54
-:100B0000104FFFDC2404FFFF0A0018D78E260000D8
-:100B10000A00190E240200143C08000400C83824FE
-:100B200050E0FFD400002021024020210A0018E8F4
-:100B3000240200138F86002827BDFFE0AFB1001408
-:100B4000AFBF0018AFB0001090C300C430A500FFC5
-:100B50003062002010400008008088218CCB00C04B
-:100B60002409FFDF256A0001ACCA00C090C800C498
-:100B700001093824A0C700C414A000403C0C800028
-:100B80008F840028908700C42418FFBF2406FFEF3D
-:100B900030E3007FA08300C4979F00488F82004C01
-:100BA0008F8D002803E2C823A7990048A5A000ACB8
-:100BB00091AF00C401F87024A1AE00C48F8C00284E
-:100BC000A18000C78F8A0028A5400072AD4000DCDC
-:100BD000914500C400A65824A14B00C48F90002466
-:100BE0008F84004C978600480204282110C0000F13
-:100BF000AF850024A38000443C0780008E2C0008B1
-:100C000094ED01208E2B0004018D5021014B802199
-:100C1000020620233086FFFF30C8000F390900018B
-:100C20003131000116200009A38800449386003466
-:100C30008FBF00188FB100148FB0001027BD0020A7
-:100C4000AF85005003E00008AF86004C00C8702359
-:100C50008FBF0018938600348FB100148FB000103E
-:100C600034EF0C00010F282127BD0020ACEE0084DA
-:100C7000AF85005003E00008AF86004C359001803E
-:100C8000020028210E001872240600828F8400289A
-:100C9000908600C430C5004050A0FFBAA380005425
-:100CA0008F8500383C0680008CCD01B805A0FFFE82
-:100CB0008F8900582408608224070002AE090000D2
-:100CC000A6080008A207000B8CA300083C0E100029
-:100CD000AE0300108CA2000CAE0200148CBF0014F6
-:100CE000AE1F00188CB90018AE1900248CB800246F
-:100CF000AE1800288CAF0028AE0F002CACCE01B887
-:100D00000A001932A38000548F8A002827BDFFE013
-:100D1000AFB10014AFB000108F88004CAFBF001807
-:100D20009389002C954200AC30D100FF0109182BAB
-:100D30000080802130AC00FF3047FFFF00005821C9
-:100D400014600003310600FF0120302101095823FF
-:100D5000978300480068202B1480001B00000000CF
-:100D600010680043240A0001118A004834E7088013
-:100D70003165FFFF0E001814020020210E001854E8
-:100D80008F8400588F840028948D007025AC00015A
-:100D9000A48C0070948B00703C0608008CC63188CF
-:100DA00031677FFF10E6004F0000000002002021A5
-:100DB000022028218FBF00188FB100148FB00010BF
-:100DC0000A00191E27BD0020914400C42406FF809C
-:100DD00000868825A15100C4978400483088FFFF11
-:100DE0001100001C9389002C8F8E00282419EFFF1E
-:100DF000008BF82395D800AC0168682B33E900FF1D
-:100E000003197824A5CF00AC51A0002A0100582175
-:100E10008E0500202408FFFB2403000100A81024F5
-:100E2000AE0200201183002534E78000020020215B
-:100E30003165FFFF0E00181401203021978B004808
-:100E40008F87004CA780004800EB8023AF90004CB8
-:100E50009389002C8F8C00288FBF00188FB100144D
-:100E60008FB0001027BD002003E00008A18900C753
-:100E70008E0800202409FFFB34E7800001092824A4
-:100E8000AE050020158AFFBA34E708800200202151
-:100E90000E0017E23165FFFF020020210220282109
-:100EA0008FBF00188FB100148FB000100A00191EF8
-:100EB00027BD00200A0019D500004821020020218A
-:100EC0003165FFFF0E0017E201203021978B0048AB
-:100ED0008F87004CA780004800EB80230A0019E5AB
-:100EE000AF90004C94890070240A8000012A4024AD
-:100EF000A4880070908500709099007030A200FF67
-:100F0000000219C20003F827001FC1C0332F007F61
-:100F100001F87025A08E00700A0019BD0200202182
-:100F20008F88002824030001910A0078910500C7EA
-:100F3000250900783147003F24E6FFE000C318048C
-:100F40002CC2002030670019A385002C1040001A25
-:100F5000AF8900383C0A8000354B000224050001AF
-:100F60002406000114E00016006B10240000282164
-:100F70001440000F306300201060000F24050001B2
-:100F80008D0600748D1900742403FF8000C31024A3
-:100F9000000279403338007F01F868253C0E1000CC
-:100FA00001AE6025AD4C08309128000131060001EA
-:100FB0000A0019930000000003E000080000000090
-:100FC0008D0F00748D0D00742418FF8001F87024BB
-:100FD000000E414031AC007F010C50253C0B10004D
-:100FE000014B38253C0980000A001993AD270830D1
-:100FF00027BDFFD8AFB000108F900038AFB40020ED
-:10100000AFB10014AFBF0024AFB3001CAFB20018E3
-:101010008E0500103C0208008C4231B08F86003CE7
-:1010200030A73FFF00E2182B8CD2001400808821EB
-:101030008CD30020106000070000A02190CB000D91
-:10104000240AFF80014B4824312800FF1500000CC2
-:1010500000056382022020212411000DA391005479
-:101060008FBF00248FB400208FB3001C8FB20018F4
-:101070008FB100148FB000100A00189727BD002808
-:101080003185000354A0FFF40220202194CF001CDE
-:101090008F8E00288E070028A5CF00D88CCD001099
-:1010A000024D302310E6005C2402001F0E0018974A
-:1010B000A3820054241FFFFF105F004E2404FFFF93
-:1010C0008F8300408F880030026398218D090010C3
-:1010D000012310238F830020AD020010AD130020E8
-:1010E0008C67007400F3202B148000620220202102
-:1010F0008F86003C8E0C00248CC5002411850007CF
-:1011000002202021240E001C0E001897A38E0054EC
-:10111000240DFFFF104D00372404FFFF8F840030A3
-:101120008C980024270F0001AC8F00241272004419
-:101130008F9900208F320074125300413C0A0080C6
-:101140008E090000012A10241440003A000000001B
-:101150008E0400142412FFFF10920006240B001BC3
-:10116000022020210E001897A38B0054105200215A
-:101170002404FFFF8E0300003C0C0001006C2824B7
-:1011800010A000133C0600800066A0241680000911
-:101190000200282102202021240E001A0E00189798
-:1011A000A38E0054240DFFFF104D00122404FFFFF6
-:1011B00002002821022020210E0018B72406000179
-:1011C0002410FFFF2404FFFF1050000A2414000124
-:1011D0008F8F0030022020210280302195F20034D0
-:1011E00024050001265800010E001993A5F80034CB
-:1011F000000020218FBF00248FB400208FB3001C7B
-:101200008FB200188FB100148FB000100080102131
-:1012100003E0000827BD00288F83004000E3C821B9
-:101220000259C02B1300FFA88F8800300A001A7CD7
-:1012300024020018AC8000200A001AA68E040014B4
-:101240008E1F00003C07008003E798241660FFF91A
-:101250002408001A022020210E001897A3880054A9
-:101260002403FFFF1443FFBA2404FFFF0A001ACF30
-:101270008FBF0024240B001D0E001897A38B005471
-:10128000240AFFFF144AFF9A2404FFFF0A001ACF22
-:101290008FBF00248F85002827BDFFD8AFB3001C67
-:1012A000AFB20018AFB10014AFB00010AFBF002054
-:1012B00090A700C48F9000382412FFFF34E2004052
-:1012C00092060000A0A200C48E03001000809821A6
-:1012D0001072000630D1003F2408000D0E00189750
-:1012E000A3880054105200262406FFFF8F8A00288E
-:1012F0008E0900188D4400C011240007240C000E34
-:10130000026020210E001897A38C0054240BFFFFCD
-:10131000104B001B2406FFFF2404002012240004AD
-:101320008F8D002891AF00C435EE0020A1AE00C41F
-:101330008F85004010A0001A000000001224004B0E
-:101340008F9800288F92FEEC2406FFFD9710007006
-:101350009651000A1230000B8FBF00203C1F08007E
-:101360008FFF318C03E5C82B1720001E026020215F
-:10137000000028210E0019932406000100003021EE
-:101380008FBF00208FB3001C8FB200188FB10014E4
-:101390008FB0001000C0102103E0000827BD002816
-:1013A0005224002A8E0300148F8400289489007030
-:1013B00025280001A4880070948700703C0508006F
-:1013C0008CA5318830E27FFF1045000E0000000040
-:1013D000026020210E00191E240500010A001B31A5
-:1013E000000030212402002DA38200540E00189723
-:1013F0002413FFFF1453FFE12406FFFF0A001B32F2
-:101400008FBF0020949800702419800024050001EB
-:1014100003199024A492007090910070908D007038
-:10142000323000FF001079C2000F7027000E61C03B
-:1014300031AB007F016C5025A08A00700E00191E90
-:10144000026020210A001B31000030212406FFFF2A
-:101450001466FFD68F840028026020210E00191E1A
-:10146000240500010A001B31000030210260202108
-:101470000A001B4B2402000A8F88002827BDFFE8C2
-:10148000AFB00010AFBF0014910A00C48F870038BE
-:1014900000808021354900408CE60010A10900C47D
-:1014A0003C0208008C4231B030C53FFF00A2182B2F
-:1014B000106000078F85003C240DFF8090AE000D6A
-:1014C00001AE6024318B00FF156000080006C38266
-:1014D000020020212403000D8FBF00148FB00010E4
-:1014E00027BD00180A001897A38300543306000391
-:1014F000240F000254CFFFF70200202194A2001C09
-:101500008F85002824190023A4A200D88CE80000AD
-:1015100000081E02307F003F13F900353C0A0083AB
-:101520008CE800188CA600C011060008000000001E
-:101530002405000E0E001897A38500542407FFFF12
-:10154000104700182404FFFF8F85002890A900C4CD
-:1015500035240020A0A400C48F8C0030918E000D93
-:1015600031CD007FA18D000D8F8300401060001CE5
-:10157000020020218F84003C8C9800100303782BFC
-:1015800011E0000D2419001802002021A399005435
-:101590000E0018972410FFFF105000022404FFFFD4
-:1015A000000020218FBF00148FB000100080102198
-:1015B00003E0000827BD00188C8600108F9F0030C4
-:1015C0000200202100C31023AFE200102405000117
-:1015D0000E001993240600010A001BBA0000202106
-:1015E0000E00191E240500010A001BBA000020216C
-:1015F000010A5824156AFFD98F8C0030A0A600EC90
-:101600000A001BA7A386004627BDFFD8AFB0001075
-:101610008F900038AFB20018AFBF0020AFB3001CEE
-:10162000AFB100148E1100103C0308008C6331B080
-:1016300032253FFF00A3102B1040000800809021AE
-:101640008F86003C2409FF8090CA000D012A4024A7
-:10165000310700FF14E0000B00116B8202402021D3
-:101660002412000DA39200548FBF00208FB3001CE2
-:101670008FB200188FB100148FB000100A001897B5
-:1016800027BD002831AC0003240B0001558BFFF46B
-:101690000240202190CF000D31EE000811C0006003
-:1016A0008F93004016600009240200278E19000C59
-:1016B0008CD8002017380005240200208E02000874
-:1016C0008CDF0024105F0040240200200E001897D9
-:1016D000A38200542406FFFF104600332404FFFFBA
-:1016E0008F990030240AFFF73C13800E9329000DD8
-:1016F0002404FF803C0D8000012AF824A33F000D44
-:101700008F9900203C0808008D0831AC8F83005869
-:10171000972700788F9F00300103102130E57FFF6D
-:10172000000530400046782131F8007F0313602126
-:1017300001E47024ADAE002CA59100008FEB0028D1
-:10174000256A0001AFEA00288FE3002C8E09002CE7
-:1017500000694021AFE8002C8E07002CAFE7003075
-:101760008E050014AFE5003497E6003A24C200016C
-:10177000A7E2003A973300783C1008008E1031B091
-:101780002663000130717FFF123000270060302196
-:101790008F8F002002402021240500010E00191E19
-:1017A000A5E60078000020218FBF00208FB3001C29
-:1017B0008FB200188FB100148FB00010008010217C
-:1017C00003E0000827BD00288E0500142413FFFF46
-:1017D00010B3001D8F8300288E0800188C6700C08E
-:1017E000150700092402000E8E0A00248CC9002867
-:1017F00015490005240200218E0700288CCB002CFF
-:1018000010EB00132402001F0E001897A38200544F
-:101810001453FFB32404FFFF0A001C3C8FBF0020B9
-:101820000A001C0424020024240E8000006E682498
-:1018300031ACFFFF000C5BC2317100FF001180274B
-:101840000A001C35001033C00A001C532402002576
-:101850008E05002C10A0FFEC240200238F8E0020A8
-:101860008DCD007401A5602B1580FFE724020026B2
-:101870008CCF001400A7C02101F8202B1080FF9905
-:101880008F990030024020210A001C5324020022BC
-:1018900027BDFFE0AFB000108F900038AFB100144B
-:1018A000AFBF00188E0500103C0308008C6331B0F8
-:1018B0000080882130A43FFF0083102B10400007D8
-:1018C0008F86003C2409FF8090CA000D012A402425
-:1018D000310700FF14E000098F8B00402410000D39
-:1018E00002202021A39000548FBF00188FB1001454
-:1018F0008FB000100A00189727BD00201160000863
-:101900000005C3828F8F00288F8EFEEC2407FFFD19
-:1019100095EC007095CD000A11AC00388FBF00180F
-:101920003305000314A0001000000000921900020B
-:1019300013200041000000008E06002450C0000F5C
-:1019400092040003022020212402000F0E001897A9
-:10195000A38200542408FFFF144800072407FFFF58
-:101960000A001CD08FBF001890C3000D306400081F
-:101970001080003702202021920400032407000277
-:10198000308900FF15270005308F00FF8F8A004047
-:1019900011400031240C002C308F00FF39E500107D
-:1019A0002CAD00012DEE00010200282101CD3025D3
-:1019B0000E0018B7022020212410FFFF1050000E47
-:1019C0002407FFFF8F8300401060001702202021B2
-:1019D0003C1908008F39318C0323C02B5700000CB1
-:1019E0002411002D02202021000028210E0019932F
-:1019F00024060001000038218FBF00188FB10014A9
-:101A00008FB0001000E0102103E0000827BD002087
-:101A10000E001897A39100541450FFF62407FFFFFF
-:101A20000A001CD08FBF00180E00191E24050001EB
-:101A30000A001CCF000038218CDF00248E02002415
-:101A4000545FFFC1022020210A001CB09204000351
-:101A50000A001CA424020010022020210E00189766
-:101A6000A38C0054240BFFFF104BFFE32407FFFF60
-:101A70000A001CB79204000330A500FF24060001F1
-:101A800024A9000100C9102B1040000C00004021C7
-:101A9000240A000100A61823308B000124C600018F
-:101AA000006A3804000420421160000200C9182BAB
-:101AB000010740251460FFF800A6182303E0000882
-:101AC0000100102127BDFFD8AFB000188F9000385B
-:101AD000AFB1001CAFBF00202403FFFF2411002F73
-:101AE000AFA3001092060000240500082610000194
-:101AF000006620260E001CEF308400FF00021E004E
-:101B00003C021EDC34466F410A001D170000102104
-:101B100010A00009008018212445000130A2FFFF19
-:101B20002C4500080461FFFA0003204000862026AF
-:101B300014A0FFF9008018210E001CEF24050020DE
-:101B40008FA300102629FFFF313100FF000342025E
-:101B5000240700FF1627FFE2010218260003502782
-:101B6000AFAA0014AFAA00100000302127A800106F
-:101B700027A7001400E6782391ED000324CE00018E
-:101B800000C8602131C600FF2CCB00041560FFF9AE
-:101B9000A18D00008FA200108FBF00208FB1001C0C
-:101BA0008FB0001803E0000827BD0028938300349D
-:101BB00027BDFFE024020034AFB10014AFB0001025
-:101BC000AFBF001CAFB20018008088211062006215
-:101BD00000A0802192040004148000458F88002812
-:101BE000A380002C8E0500048D0600C83C0700FF72
-:101BF00034E3FFFF00A3282400C5102B1440004D40
-:101C0000AF850040978A00488F87004C014710231A
-:101C100010A00032A78200488F980020304CFFFFB0
-:101C20009312007C0012788231F100010011708063
-:101C300001C56821018D582B116000618F86002835
-:101C40008F8900248F8400501089005E3C023F0180
-:101C50008E1F00003C10250003E2C8241730007AD4
-:101C60008F8400388F8700388F8600288CE300002F
-:101C7000ACC300788CE50010ACC500888F87004CA1
-:101C80008F850040938D002C30AE0003000E402362
-:101C9000310A0003014D4021A388002C94CB00ACF5
-:101CA00001276021AF8C002435691000A4C900AC65
-:101CB0001620005101452021AF84004C0000202156
-:101CC0008FBF001C8FB200188FB100148FB00010AE
-:101CD0000080102103E0000827BD00208F8400242D
-:101CE000AF80004C008730210A001D80AF860024A1
-:101CF000241F000CA39F00540E00189702202021DF
-:101D00002419FFFF1059FFEE2404FFFF8F880028DD
-:101D1000A380002C8E0500048D0600C83C0700FF40
-:101D200034E3FFFF00A3282400C5102B1040FFB5AB
-:101D3000AF8500400220202124090019A389005406
-:101D40000E0018972411FFFF1051FFDD2404FFFF40
-:101D50000A001D528F8500408F8400288F8700382D
-:101D60008CF20030908600C430C5001014A0001022
-:101D70008F83004C2C68000515000028000000002F
-:101D8000908A00C4246BFFFC314900101520000824
-:101D9000316400FF8F8D00508F8C002411AC000443
-:101DA000388F000131EE000115C0002F0000000047
-:101DB0000E001D02000000000A001DD900000000F6
-:101DC0008F890024938D002C30AE0003000E402339
-:101DD000310A0003014D4021A388002C94CB00ACB4
-:101DE00001276021AF8C002435691000A4C900AC24
-:101DF0001220FFB10145202125180004A398002CD2
-:101E000094CF00AC24920004AF92004C35F1200036
-:101E1000A4D100AC0A001D81000020218C8200DCCE
-:101E20001242FF6C0220202124180005A3980054C0
-:101E30000E0018972412FFFF1452FF662404FFFFC0
-:101E40000A001D828FBF001C30E500FF0E00179EA8
-:101E5000000030218F8600288F87004C8F89002456
-:101E60000A001D728F8500400E0017C90000000097
-:101E70000A001DD9000000009383004627BDFFE043
-:101E800024020002AFB20018AFB10014AFBF001CB3
-:101E900000808821AFB00010000090211062005532
-:101EA0002404FFFD978300488F85004C3066FFFFB8
-:101EB00000C5202B1480005B938700343C08800011
-:101EC0009504012010E500528F8A00248F84005071
-:101ED00030A500FF0E00179E240600018F9F0058BA
-:101EE0003C0580003C19408027ED017831B0007836
-:101EF000240EFF800219582534AF090031B80007BD
-:101F000001AE6024ACAC0800030F8021ACAB08101C
-:101F100002202021020028210E001D3CAF90003835
-:101F20002403FFFF104300332404FFFF8E0C001036
-:101F30003C0708008CE731B09206000031843FFF77
-:101F40000087102B1040002330CD003F8F980058A1
-:101F5000000471803C0408008C8431A82409FF80AF
-:101F60009390004500984021010E202100897024A3
-:101F7000000E51403C0980003099007F3C0F0080EA
-:101F80008F8800283525094035E2000101593825A0
-:101F9000308B0078308600073C0310003C1F800C1B
-:101FA00000C5C0210162582500E35025033F782178
-:101FB00036050001AD2E0804AF98003CAD2B081487
-:101FC000AF8F0030AD2E0028AD040074AD2A08306C
-:101FD000A38500459383004624100003507000271A
-:101FE00025A3FFE0240C0001106C001C2406002334
-:101FF000024020218FBF001C8FB200188FB1001447
-:102000008FB000100080102103E0000827BD0020E1
-:10201000314900035520FFAE8F8400500A001E1581
-:102020008F9000508F840050306500FF0E00179E87
-:1020300024060001938B0034240500341165001838
-:10204000978300488F85004C3062FFFF00A2582321
-:10205000AF8B004C0A001E4DA780004811A6003728
-:1020600000000000022020212411000B0E00189710
-:10207000A39100540A001E4D004090212C720020B4
-:102080001240FFF80003F8803C07080124E7813C78
-:1020900003E7C8218F2D000001A000080000000008
-:1020A0008F85004C2CA200055440001DA7800048DD
-:1020B000978A00483148FFFF00A848232D2F0005CC
-:1020C00011E00003314400FF24AEFFFC31C400FFE7
-:1020D0008F9000508F980024121800043899000146
-:1020E000332D000115A00029000000008F91002869
-:1020F000922500C434A30010A22300C49783004893
-:102100008F85004C8F8400283062FFFF00A2582387
-:10211000AC8000DCA78000480A001E4DAF8B004C4D
-:102120003062FFFF00A258230A001E4DAF8B004C07
-:102130002403FFFF11830005000000000E001B6F49
-:10214000022020210A001E4D004090210E001AF6A8
-:10215000022020210A001E4D004090210E001BD3BA
-:10216000022020210A001E4D004090210E001A4D31
-:10217000022020210A001E4D004090210E001C75F7
-:10218000022020210A001E4D004090210E0017C998
-:1021900000000000978300488F85004C306CFFFFE3
-:1021A00000AC38232CFF000553E0FFA83062FFFF8E
-:1021B0008F860028A7800048ACC200DC3062FFFF99
-:1021C00000A258230A001E4DAF8B004C27BDFFD044
-:1021D000AFB20018AFB00010AFBF0028AFB50024F9
-:1021E000AFB40020AFB3001CAFB100143C0C8000B2
-:1021F0008D880128240FFF803C07800A25100100EC
-:10220000250B0080020F68243205007F016F7024C7
-:10221000AD8E009000A72821AD8D002490A700EC82
-:102220003169007F3C0A8004012A1821A3870046F7
-:102230009066007C00809021AF83002030C20002B5
-:10224000AF880058AF85002800A018211440000274
-:102250002404003424040030A38400348C6600CCB1
-:1022600030F100FF24040004AF86004C1224000467
-:10227000A38000548E5300041660001D3C088000AB
-:102280009387004530F200011240000F8FBF0028F5
-:102290008CB800748CA400742419FF80031988245E
-:1022A00000117140308F007F01CF60253C0D200070
-:1022B000018D582530F500FE3C0A8000AD4B0830FA
-:1022C000A39500458FBF00288FB500248FB4002050
-:1022D0008FB3001C8FB200188FB100148FB00010A4
-:1022E0002402000127BD003003E00008ACA600CCAA
-:1022F0008E590008951F01208E460010033FC02113
-:102300003307FFFF30F5000F32B40001AF86002421
-:102310001680003BA395004435060C0002A6102150
-:1023200000F51823AD030084AF8200508E490004ED
-:102330003128FFFF1100002BA78900482410FF80DF
-:102340003C1580003C1420000A001F3B2413FFFEB4
-:1023500090AE00C4020E682431AC00FF1580002A44
-:10236000024020219384004597860048308F000169
-:1023700011E0000B026428248F8900288D2300744B
-:102380008D280074A3850045007010240002C94008
-:10239000311F007F033FC02503148825AEB10830EC
-:1023A00010C000108F85002890A700C40207582491
-:1023B000316A00FF1540FFE6024020210E001DEFAC
-:1023C000979100481040FFE8938400452405FFFDE5
-:1023D000544500058E430020022028210E0017746A
-:1023E000024020218E430020307000041600000AB5
-:1023F0002414FFFB8F8500280A001EF18F86004CF5
-:102400000A001F1CAF8600500E001A1900000000C1
-:102410000A001F2B93840045007498240E00178E29
-:10242000AE5300208F8500280A001EF18F86004CD5
-:1024300027BDFFD8AFB3001CAFB10014AFBF002061
-:10244000AFB20018AFB000103C0280008C520140C7
-:102450008C4B01483C048000000B8C02322300FFAF
-:10246000317300FF8C8501B804A0FFFE3490018019
-:10247000AE1200008C8701442464FFF024060002A1
-:102480002C830013AE070004A6110008A206000B5F
-:10249000AE1300241060004F8FBF0020000448805E
-:1024A0003C0A0801254A81BC012A40218D04000014
-:1024B00000800008000000003C1008008E1031A8C9
-:1024C00031733FFF001389800212C8212405FF8069
-:1024D00003312021264C0100264700803C1F80004C
-:1024E00000E51824318F007F30E9007F308A007FBB
-:1024F0003C18800A3C0E80043C0D800C00851024A2
-:1025000001853024014D8021AFE6002401F84021EF
-:10251000AFE30090012E9821AFE20028AF90003089
-:10252000AF880028AF9300200E001863016080215F
-:102530003C0380008C6B01B80560FFFE8F87003084
-:10254000346501808F86002890E3000DACB2000056
-:10255000A4B00006000316000002FE03001F90272F
-:10256000001227C21080007A24C2007824196082E9
-:10257000A4B90008A0A00005241F0002A0BF000B02
-:1025800000041C008F8B00203C0227000062902575
-:10259000ACB20010ACA00014ACA00024ACA0002889
-:1025A000ACA0002C8D7300382410FF80ACB3001851
-:1025B00090E4000D02048824322500FF10A00005DD
-:1025C0008FBF002090EC000D3188007FA0E8000D47
-:1025D0008FBF00208FB3001C8FB200188FB1001482
-:1025E0008FB000103C0D10003C0A800027BD002871
-:1025F00003E00008AD4D01B8265F01002405FF800F
-:1026000033F8007F3C06800003E578243C19800AFB
-:1026100003192021ACCF0024908E00C400AE6824A2
-:1026200031AC00FF1180FFEAAF840028248E0078CF
-:1026300095CD00123C0C08008D8C31A831AB3FFFCA
-:1026400001924821000B5180012A402101052024DC
-:10265000ACC400283107007F3C06800C00E6202136
-:102660009083000D00A31024304500FF10A0FFD878
-:10267000AF8400309098000D330F001015E0FFD5A7
-:102680008FBF00200E001863000000003C03800094
-:102690008C7901B80720FFFE00000000AE12000098
-:1026A0008C720144AE120004A6110008241100022D
-:1026B000A211000BAE1300240A001FC68FBF00201A
-:1026C0003C1260008E452C083C03F0033462FFFF8F
-:1026D00000A2F824AE5F2C088E582C083C1901B0DB
-:1026E00003199825AE532C080A001FC68FBF00207F
-:1026F000264D010031AF007F3C10800A240EFF8080
-:1027000001F0282101AE60243C0B8000AD6C002458
-:102710001660FFAFAF85002824110003A0B100ECC4
-:102720000A001FC68FBF002026480100310A007F23
-:102730003C0B800A2409FF80014B30210109202431
-:102740003C078000ACE400240A001FC5AF860028C7
-:10275000944A001232083FFF314C3FFF1588FF8436
-:102760002419608290CF00C4240EFF8001CF48243A
-:10277000312D00FF11A0FF7E00000000240700049F
-:10278000A0C700EC8F870030241860842406000D59
-:10279000A4B80008A0A600050A001FB0241F00026C
-:1027A0000800330C0800330C080033E8080033BC81
-:1027B000080033A0080032F0080032F0080032F0C0
-:1027C00008003314800801008008008080080000A1
-:1027D0005F865437E4AC62CC50103A4536621985B6
-:1027E000BF14C0E81BC27A1E84F4B556094EA6FE7B
-:1027F0007DDA01E7C04D748108007A7408007AC060
-:1028000008007A80080079A808007A8008007AB069
-:1028100008007A80080079A8080079A8080079A83B
-:10282000080079A8080079A8080079A8080079A804
-:10283000080079A8080079A8080079A808007AA0FB
-:1028400008007A90080079A8080079A8080079A8FB
-:10285000080079A8080079A8080079A8080079A8D4
-:10286000080079A8080079A8080079A8080079A8C4
-:10287000080079A808007A900800806C08007F148E
-:102880000800803408007F140800800408007DFCE4
-:1028900008007F1408007F1408007F1408007F14CC
-:1028A00008007F1408007F1408007F1408007F14BC
-:1028B00008007F1408007F1408007F1408007F14AC
-:0428C00008007F3C51
-:0C28C4000A0001220000000000000000DB
-:1028D0000000000D747061352E302E306A33000018
-:1028E00005000001000000000000000000000000E2
-:1028F00000000000000000000000000000000000D8
-:1029000000000000000000000000000000000000C7
-:1029100000000000000000000000000000000000B7
-:1029200000000000000000000000000000000000A7
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000000000087
-:1029500010000003000000000000000D0000000D4A
-:102960003C02080024421C203C03080024631FA0F2
-:10297000AC4000000043202B1480FFFD24420004E3
-:102980003C1D080037BD2FFC03A0F0213C100800BF
-:10299000261004883C1C0800279C1C200E0002E224
-:1029A000000000000000000D2402FF8027BDFFE0B2
-:1029B00000821024AFB00010AF420020AFBF00185B
-:1029C000AFB10014936500043084007F03441821E4
-:1029D0003C0200080062182130A50020036080211D
-:1029E0003C080111277B000814A000022466005C4B
-:1029F00024660058920200049743010492040004E4
-:102A00003047000F3063FFFF308400400067282309
-:102A100010800009000048219202000530420004A5
-:102A2000104000050000000010A00003000000009E
-:102A300024A5FFFC24090004920200053042000492
-:102A4000104000120000000010A000100000000064
-:102A50009602000200A72021010440252442FFFE27
-:102A6000A7421016920300042402FF8000431024A2
-:102A7000304200FF104000033C0204000A000172D3
-:102A8000010240258CC20000AF4210188F4201782D
-:102A90000440FFFE2402000AA74201409602000201
-:102AA00024040009304200070002102330420007CE
-:102AB000A7420142960200022442FFFEA7420144BF
-:102AC000A740014697420104A74201488F420108EE
-:102AD0003042002050400001240400019202000412
-:102AE000304200101440000234830010008018218E
-:102AF000A743014A000000000000000000000000A1
-:102B000000000000AF4810000000000000000000BE
-:102B100000000000000000008F4210000441FFFE92
-:102B20003102FFFF10400007000000009202000485
-:102B30003042004014400003000000008F42101893
-:102B4000ACC20000960200063042FFFF24420002A1
-:102B50000002104300021040036288219622000008
-:102B60001120000D3044FFFF00A710218F83003893
-:102B70008F45101C000210820002108000431021BB
-:102B8000AC45000030A6FFFF0E0002D100052C026C
-:102B900000402021A6220000920300042402FF80AE
-:102BA00000431024304200FF1040001F00000000CE
-:102BB00092020005304200021040001B000000009D
-:102BC0009742100C2442FFFEA7421016000000009E
-:102BD0003C02040034420030AF421000000000000C
-:102BE0000000000000000000000000008F42100004
-:102BF0000441FFFE000000009742100C8F45101C9E
-:102C00003042FFFF24420030000210820002108098
-:102C1000005B1021AC45000030A6FFFF0E0002D182
-:102C200000052C02A622000096040002248400085D
-:102C30000E0001E73084FFFF974401040E0001F508
-:102C40003084FFFF8FBF00188FB100148FB00010C9
-:102C50003C02100027BD002003E00008AF420178CD
-:102C60003084FFFF308200078F850024104000026F
-:102C7000248300073064FFF800A4102130421FFFB6
-:102C800003421821247B4000AF850028AF82002436
-:102C900003E00008AF4200843084FFFF3082000F61
-:102CA0008F85002C8F860034104000022483000F93
-:102CB0003064FFF000A410210046182BAF850030CF
-:102CC0000046202314600002AF82002CAF84002C49
-:102CD0008F82002C340480000342182100641821E4
-:102CE000AF83003803E00008AF4200808F820014F9
-:102CF000104000088F8200048F82FFCC1440000532
-:102D00008F8200043C02FFBF3442FFFF0082202478
-:102D10008F82000430430006240200021062000F7C
-:102D20003C0201012C620003504000052402000413
-:102D30001060000F3C0200010A00022E000000009B
-:102D400010620005240200061462000C3C0201110E
-:102D50000A000227008210253C0200110082102583
-:102D6000AF421000240200010A00022EAF82000CC4
-:102D700000821025AF421000AF80000C0000000060
-:102D8000000000000000000003E000080000000058
-:102D90008F82000C10400004000000008F421000E1
-:102DA0000441FFFE0000000003E0000800000000F6
-:102DB0008F8200102443F800000229C224A2FFF0F1
-:102DC0002C63030110600003000210420A00025548
-:102DD000AC8200008F83001800A3102B1440000B5E
-:102DE0000000382100A31023244600018F82001C1C
-:102DF000006210212442FFFF0045102B54400004C4
-:102E00002402FFFF0A000255AC8600002402FFFFE7
-:102E10000A00025AAC8200008C8200003C030800C9
-:102E200024631C5C000211400043382103E00008C9
-:102E300000E010213C0908008D291D80000451404C
-:102E40003C19080027391C5C00C0782100806021F3
-:102E5000240EFFFF000038210159402111200036C7
-:102E6000000030213C18080027181D983C0D080070
-:102E700025AD1D9C000F582B000611800046102127
-:102E8000000218C0007810218C420000158200203A
-:102E9000006D20218CA20000544000098D02001812
-:102EA0003C0208008C421D8424420001AC820000D8
-:102EB0003C010800AC221D840A0002CF0000202142
-:102EC0008F47002000003021000211C01160004A2D
-:102ED000AF4200208D08001C3C0900088CA30000B4
-:102EE0000066182100031880007A10210049102183
-:102EF0008C44000024C600010068182100CF102B6C
-:102F00001440FFF6AC6400000A0002CD000000008F
-:102F10008C840000008E102B5040000424C6000159
-:102F20000080702100C0382124C6000100C9102B88
-:102F30001440FFD20006118024020001ACA2000060
-:102F40003C0208008C421D7C3C0308008C631D8001
-:102F50000043102B1440002A2404FFFE01591021C5
-:102F60008C420018104000262404FFFF0007218037
-:102F70003C0508008CA51D84008720218D060018C3
-:102F8000000420C03C02080024421D980082102149
-:102F90003C03080024631D9CAC4C000024A50001E8
-:102FA000008318213C02080024421DA0AC650000EB
-:102FB000000631C03C010800AC251D8400822021A0
-:102FC0008F470020AD04001CAF46002011E0000A2E
-:102FD000000030213C020008034228218CA200009E
-:102FE00024C6000100CF182BAC82000024A50004E9
-:102FF0001460FFFA24840004AF4700200000202161
-:1030000003E00008008010213084FFFF30C6FFFF7E
-:1030100000052C0000A628253882FFFF004510215E
-:103020000045282B0045102100021C023042FFFF02
-:103030000043102100021C023042FFFF0043102118
-:103040003842FFFF03E000083042FFFF27BDFFC802
-:10305000AFBF0030AFB3002CAFB20028AFB1002437
-:10306000AFB000203C0460088C8250002403FF7F36
-:103070003C066000004310243442380CAC825000FF
-:103080008CC24C1C3C1A8000000216023042000F19
-:1030900010400007AF82001C8CC34C1C3C02001F78
-:1030A0003442FC0000621824000319C2AF830018E8
-:1030B0008F420008275B400034420001AF42000805
-:1030C000AF8000243C02601CAF400080AF40008411
-:1030D0008C4500088CC3080834028000034220217C
-:1030E0002402FFF0006218243C0200803C0108002A
-:1030F000AC2204203C025709AF840038146200045B
-:10310000AF850034240200010A000314AF820014CA
-:10311000AF8000142403003D240200043C01080099
-:10312000AC221D943C010800AC231D903C0108001A
-:10313000AC231D8C3C010800AC231D883C13080007
-:1031400026731C5C240400043C02080024421C7406
-:10315000240300082463FFFFAC400004AC400000DF
-:103160000461FFFC24420020000410C00044102130
-:103170002442003D3C010800AC221D9024020001C5
-:103180003C010800AC221D7C2402FFFF3C0108002A
-:10319000AC221D983C010800AC201D848F42000029
-:1031A00038420001304200011440FFFC8F820014BD
-:1031B0001040001600000000974201041040000576
-:1031C0008F830000146000072462FFFF0A00034B96
-:1031D0002C62000A2C620010504000048F83000013
-:1031E00024620001AF8200008F8300002C62000A7D
-:1031F000144000032C6200070A000352AF80FFCC8A
-:103200001040000224020001AF82FFCC8F4301086E
-:103210008F44010030622000AF830004104000089A
-:10322000AF8400103C0208008C42042C24420001B0
-:103230003C010800AC22042C0A0006D73C024000E6
-:103240003065020014A0000324020F001482030959
-:1032500024020D0097420104104003713C0240001B
-:1032600030624000144000AD8F8200388C4400086A
-:103270008F4201780440FFFE24020800AF4201782B
-:1032800024020008A7420140A740014297420104DE
-:103290008F8400043051FFFF30820001104000078E
-:1032A000022080212623FFFE240200023070FFFF4F
-:1032B000A74201460A00037FA7430148A7400146F1
-:1032C0003C0208008C42043C1440000D8F83001027
-:1032D000308200201440000224030009240300016E
-:1032E000006020218F830010240209005062000139
-:1032F00034840004A744014A0A00039A0000000035
-:1033000024020F00146200053082002014400006E1
-:103310002403000D0A000399240300051440000251
-:103320002403000924030001A743014A3C020800CA
-:103330008C4204203C0400480E00020A0044202570
-:103340000E000233000000008F82000C1040003E8F
-:10335000000000008F4210003C03002000431024B6
-:10336000104000398F8200043042000210400036C5
-:1033700000000000974210141440003300000000C9
-:10338000974210088F8800383042FFFF2442000621
-:10339000000218820003388000E830213043000129
-:1033A0008CC4000010600004304200030000000DD7
-:1033B0000A0003DB00E81021544000103084FFFFB6
-:1033C0003C05FFFF00852024008518260003182BEC
-:1033D0000004102B004310241040000500000000E2
-:1033E000000000000000000D000000002400021C8E
-:1033F0008CC200000A0003DA004520253883FFFF55
-:103400000003182B0004102B00431024104000056B
-:1034100000000000000000000000000D000000009F
-:10342000240002258CC200003444FFFF00E8102174
-:10343000AC4400003C0208008C42043024420001ED
-:103440003C010800AC2204308F6200008F840038F9
-:10345000AF8200088C8300003402FFFF1462000F6B
-:10346000000010213C0508008CA504543C04080011
-:103470008C84045000B0282100B0302B0082202121
-:10348000008620213C010800AC2504543C010800C2
-:10349000AC2404500A0006CD240400088C820000ED
-:1034A000304201001040000F000010213C050800D0
-:1034B0008CA5044C3C0408008C84044800B02821EE
-:1034C00000B0302B00822021008620213C01080022
-:1034D000AC25044C3C010800AC2404480A0006CD8D
-:1034E000240400083C0508008CA504443C040800A2
-:1034F0008C84044000B0282100B0302B00822021B1
-:10350000008620213C010800AC2504443C01080051
-:10351000AC2404400A0006CD240400088F62000891
-:103520008F62000000021602304300F024020030D7
-:1035300010620005240200401062016B8F8200209F
-:103540000A0006D52442000114A000050000000076
-:10355000000000000000000D0000000024000250E8
-:103560008F4201780440FFFE000000000E00023B85
-:1035700027A4001014400005004080210000000036
-:103580000000000D00000000240002578E02000021
-:103590001040000500000000000000000000000DC9
-:1035A000000000002400025A8F62000C0443000354
-:1035B000240200010A00055DAE000000AE0200001A
-:1035C0008F8200388C450008A20000078F65000C30
-:1035D0008F64000430A3FFFF000424020085202331
-:1035E000308200FF0043102124420005000288833E
-:1035F0002E220081A605000A14400005A204000442
-:10360000000000000000000D000000002400027215
-:103610003C0708008CE71D808FA800102409FFFFDD
-:103620000000502110E00013000030213C0C080085
-:10363000258C1D9C01802821000018218CA2FFFCF4
-:103640005102002F006C18218CA400002463020892
-:103650000089102B1040000324A502080080482197
-:1036600000C0502124C6000100C7102B5440FFF4B5
-:103670008CA2FFFC3C0508008CA51D803C020800C4
-:103680008C421D7C3C09080025291C603C03080075
-:1036900024631D9800A2102B3C0C0800258C1D9C57
-:1036A0003C0408008C841D843C0B0800256B1DA085
-:1036B0001040001A0008314000051180004510211B
-:1036C000000210C000C9382124840001004B3021C1
-:1036D0000043182124A50001004C1021AC68000013
-:1036E000ACE600183C010800AC241D84AC4400008A
-:1036F0003C010800AC251D800A0004A88E04001CB3
-:103700003C0208008C421D84244200013C01080058
-:10371000AC221D840A0004A7AC620000000A1180DC
-:10372000004A1021000210C0004328218CA3000091
-:10373000004C3821248400010003194000C93021C5
-:1037400000691821004B1021ACA80000AC600018E3
-:103750003C010800AC241D84ACC20018ACE400009D
-:103760008E04001C8F8500380E0006E702203021F1
-:103770008F6200048F430108A60200083C0210007B
-:103780000062182410600008000000009742010445
-:10379000920300072442FFEC346300023045FFFF30
-:1037A0000A0004BCA2030007974201042442FFF070
-:1037B0003045FFFF960600082CC200135440000558
-:1037C000920300079202000734420001A2020007A0
-:1037D0009203000724020001106200052402000386
-:1037E0001062000B30C7FFFF0A0004DB24E2000276
-:1037F0008F8200383C04FFFF8C43000C00641824C7
-:1038000000651825AC43000C0A0004DA30C7FFFF3E
-:103810008F8200383C04FFFF8C43001000641824A2
-:1038200000651825AC43001030C7FFFF24E20002FA
-:1038300000021083A20200058F830038304200FF8F
-:1038400000021080004330218CC500008CC20000B3
-:1038500024030004000217021443001300000000B8
-:10386000974201043C03FFFF00A318243042FFFFEE
-:10387000004710232442FFFE00622825ACC500004B
-:10388000920400058E03001C308200FF00021080AD
-:1038900000431021904200003042000F00441021EC
-:1038A0000A000510A20200068CC40004974201041D
-:1038B0009603000A3085FFFF3042FFFF00471023C8
-:1038C0002442FFD60002140000A22825ACC5000443
-:1038D0009202000792040005246300280003188365
-:1038E0000064182134420004A2030006A20200076B
-:1038F0008F8200042403FFFB3442000200431024A3
-:10390000AF820004920300068E07001C8F860038E9
-:1039100000031880006710218C44000C3C02FFF665
-:103920003442FFFF0082282400661821AE04000CF8
-:10393000AC65000C920300068E04000C3C02FF7F75
-:103940003442FFFF0003188000A2282400822024B4
-:1039500000671821AE04000CAC65000C9202000652
-:10396000000210800047102194450012AC45001061
-:10397000920200060002108000461021AC450010A3
-:103980008FA200109203000500021140000318806E
-:1039900000671821005320218C6200048C830018DA
-:1039A0001460000EAE0200143C0308008C631D8CF2
-:1039B000AC8300183C0208008C421D900062102B62
-:1039C00010400019000000003C0208008C421D94C9
-:1039D000006210213C010800AC221D8C8E020018F0
-:1039E0008F48002000003021000211C01220000B7F
-:1039F000AF4200203C0200080342282100E02021C1
-:103A00008C82000024C6000100D1182BACA200005B
-:103A1000248400041460FFFA24A50004AF480020A9
-:103A20000A00055E24020010000000000000000DE6
-:103A300000000000240002D424020010A74201402C
-:103A400024020002A7400142A7400144A7420146C8
-:103A5000974201043C0400082442FFFEA7420148AB
-:103A6000240200010E00020AA742014A9603000A3E
-:103A70009202000400431021244200023042000759
-:103A800000021023304200070E000233AE02001085
-:103A90008F6200003C0308008C630444240400107F
-:103AA000AF820008974201043042FFFF2442FFFE2C
-:103AB00000403821000237C33C0208008C42044019
-:103AC000006718210067282B0046102100451021AF
-:103AD0003C010800AC2304443C010800AC22044033
-:103AE0000A0006620000000014A0000500000000AB
-:103AF000000000000000000D00000000240003048E
-:103B00008F4201780440FFFE000000000E00023BDF
-:103B100027A400141440000500408021000000008C
-:103B20000000000D000000002400030B92060004BA
-:103B30008FA4001427A50018000630820E00025C36
-:103B4000AFA00018504000068E02000000000000E8
-:103B50000000000D00000000240003118E02000090
-:103B60005440000692020007000000000000000D13
-:103B700000000000240003169202000730420004F7
-:103B8000104000058F8200042403FFFB3442000232
-:103B900000431024AF8200048F6200040443000934
-:103BA00092020007920200068E03001C8E04000C95
-:103BB0000002108000431021AC44000CAE00000055
-:103BC00092020007304200045440000B92030004AC
-:103BD000920300058E0400148E05001C000318805B
-:103BE0003C0200010082202100651821AE0400146F
-:103BF000AC640004920300049602000A00621021E3
-:103C000024420005000290838FA200181040000D8E
-:103C1000277100088FA40014000310820242302391
-:103C200027A500180E00025CAFA200185040000645
-:103C30008E05001C000000000000000D00000000C8
-:103C40002400033F8E05001C022020210E0006E701
-:103C500002403021920400068F6500043C027FFF81
-:103C600000042080009120218C8300043442FFFF57
-:103C700000A2282400651821AC83000492020007EA
-:103C80009203000492050005304200041040001425
-:103C90009607000830A500FF0005288000B1282104
-:103CA0008CA40004974201049606000A306300FFCA
-:103CB0003042FFFF004310210046102130E3FFFF98
-:103CC000004310232442FFD83084FFFF0002140079
-:103CD00000822025ACA400040A0006169203000707
-:103CE00030A500FF0005288000B128218CA4000029
-:103CF00097420104306300FF3042FFFF0043102170
-:103D0000004710233C03FFFF008320243042FFFFC5
-:103D100000822025ACA400009203000724020001C9
-:103D2000106200060000000024020003106200116F
-:103D3000000000000A0006398E03001097420104BB
-:103D4000920300049605000A8E24000C0043102103
-:103D5000004510212442FFF23C03FFFF0083202492
-:103D60003042FFFF00822025AE24000C0A000639F5
-:103D70008E03001097420104920300049605000A86
-:103D80008E24001000431021004510212442FFEE34
-:103D90003C03FFFF008320243042FFFF00822025E8
-:103DA000AE2400108E0300102402000AA742014036
-:103DB000A74301429603000A920200043C0400401B
-:103DC00000431021A7420144A74001469742010445
-:103DD000A7420148240200010E00020AA742014A3C
-:103DE0000E000233000000008F6200009203000406
-:103DF00000002021AF820008974201049606000AC5
-:103E00003042FFFF00621821006028213C030800B7
-:103E10008C6304443C0208008C4204400065182175
-:103E2000004410210065382B004710213C01080098
-:103E3000AC2304443C010800AC220440920400047A
-:103E4000008620212484000A3084FFFF0E0001E751
-:103E500000000000974401043084FFFF0E0001F5CC
-:103E6000000000003C021000AF4201780A0006D4B6
-:103E70008F820020148200273062000697420104DE
-:103E8000104000673C0240003062400010400005D6
-:103E900000000000000000000000000D0000000015
-:103EA0002400041A8F4201780440FFFE2402080017
-:103EB000AF42017824020008A7420140A740014216
-:103EC0008F82000497430104304200011040000734
-:103ED0003070FFFF2603FFFE24020002A7420146C6
-:103EE000A74301480A00068C2402000DA7400146A2
-:103EF0002402000DA742014A8F620000240400083A
-:103F0000AF8200080E0001E7000000000A0006660C
-:103F100002002021104000423C0240009362000059
-:103F2000304300F0240200101062000524020070EB
-:103F3000106200358F8200200A0006D5244200015D
-:103F40008F620000974301043050FFFF3071FFFF84
-:103F50008F4201780440FFFE320200070002102366
-:103F6000304200072403000A2604FFFEA743014055
-:103F7000A7420142A7440144A7400146A751014876
-:103F80008F4201083042002014400002240300093F
-:103F900024030001A743014A0E00020A3C0400402A
-:103FA0000E000233000000003C0708008CE70444C8
-:103FB000021110212442FFFE3C0608008CC604407A
-:103FC0000040182100E33821000010218F65000017
-:103FD00000E3402B00C230212604000800C8302135
-:103FE0003084FFFFAF8500083C010800AC27044483
-:103FF0003C010800AC2604400E0001E70000000070
-:104000000A000666022020210E000139000000008F
-:104010008F82002024420001AF8200203C02400039
-:10402000AF4201380A000336000000003084FFFF71
-:1040300030A5FFFF000018211080000700000000DD
-:104040003082000110400002000420420065182167
-:104050000A0006DD0005284003E00008006010218A
-:1040600010C0000624C6FFFF8CA2000024A5000497
-:10407000AC8200000A0006E72484000403E0000884
-:104080000000000010A0000824A3FFFFAC86000081
-:1040900000000000000000002402FFFF2463FFFF77
-:1040A0001462FFFA2484000403E00008000000000A
-:0440B000000000010B
-:0C40B4000A00002A0000000000000000CC
-:1040C0000000000D747870352E302E306A330000F9
-:1040D000050000000000000A000001360000EA6050
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000000000000000000000000000C0
-:1041000000000000000000000000000000000000AF
-:104110000000000000000016000000000000000089
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:1041400000000000000000000000000000001388D4
-:1041500000000000000005DC00000000000000007E
-:1041600010000003000000000000000D0000000D22
-:104170003C020800244238603C03080024633B14DE
-:10418000AC4000000043202B1480FFFD24420004BB
-:104190003C1D080037BD7FFC03A0F0213C10080047
-:1041A000261000A83C1C0800279C38600E0004075D
-:1041B000000000000000000D8F86003C3C039000D2
-:1041C0003C0280000086282500A32025AC44002066
-:1041D0003C0380008C67002004E0FFFE000000002C
-:1041E00003E00008000000000A0000412404000170
-:1041F0008F85003C3C0480003483000100A310251F
-:1042000003E00008AC82002003E000080000102159
-:104210003084FFFF30A5FFFF108000070000182149
-:104220003082000110400002000420420065182185
-:104230001480FFFB0005284003E000080060102107
-:1042400010C00007000000008CA2000024C6FFFF81
-:1042500024A50004AC82000014C0FFFB24840004E9
-:1042600003E000080000000010A0000824A3FFFFE6
-:10427000AC86000000000000000000002402FFFFE8
-:104280002463FFFF1462FFFA2484000403E00008A3
-:104290000000000090AA00318FAB00108CAC0040F1
-:1042A0003C0300FF8D680004AD6C00208CAD004421
-:1042B00000E060213462FFFFAD6D00248CA7004850
-:1042C0003C09FF000109C024AD6700288CAE004CFA
-:1042D0000182C82403197825AD6F0004AD6E002C4F
-:1042E0008CAD0038314A00FFAD6D001C94A900323E
-:1042F0003128FFFFAD68001090A70030A5600002D4
-:10430000A1600004A167000090A30032306200FFAA
-:104310000002198210600005240500011065000EDE
-:104320000000000003E00008A16A00018CD800280A
-:10433000354A0080AD7800188CCF0014AD6F0014A2
-:104340008CCE0030AD6E00088CC4002CA16A000138
-:1043500003E00008AD64000C8CCD001CAD6D0018AE
-:104360008CC90014AD6900148CC80024AD68000825
-:104370008CC70020AD67000C8CC200148C830070C9
-:104380000043C82B13200007000000008CC200145B
-:10439000144CFFE400000000354A008003E00008F0
-:1043A000A16A00018C8200700A0000B700000000C2
-:1043B0009089003027BDFFF88FA8001CA3A900003A
-:1043C0008FA300003C0DFF8035A2FFFF8CAC002CBA
-:1043D00000625824AFAB0000A100000400C05821C7
-:1043E000A7A000028D06000400A048210167C82193
-:1043F0008FA50000008050213C18FF7F032C202651
-:104400003C0E00FF2C8C0001370FFFFF35CDFFFF66
-:104410003C02FF0000AFC82400EDC02400C2782495
-:10442000000C1DC00323682501F87025AD0D0000A8
-:10443000AD0E00048D240024AFAD0000AD040008D3
-:104440008D2C00202404FFFFAD0C000C954700329A
-:1044500030E6FFFFAD0600109145004830A200FF96
-:10446000000219C2506000018D240034AD04001414
-:104470008D4700388FAA001827BD0008AD0B002813
-:10448000AD0A0024AD07001CAD00002CAD000018E3
-:1044900003E00008AD00002027BDFFE0AFB2001828
-:1044A000AFB10014AFB00010AFBF001C9098003047
-:1044B00000C088213C0D00FF330F007FA0CF00001B
-:1044C000908E003135ACFFFF3C0AFF00A0CE00010A
-:1044D00094A6001EA22000048CAB00148E290004B8
-:1044E00000A08021016C2824012A40240080902112
-:1044F00001052025A6260002AE2400042605002082
-:10450000262400080E0000632406000292470030B3
-:10451000260500282624001400071E0000031603A9
-:1045200024060004044000032403FFFF96590032D0
-:104530003323FFFF0E000063AE2300102624002467
-:104540008FBF001C8FB200188FB100148FB0001005
-:1045500024050003000030210A00006D27BD002063
-:1045600027BDFFD8AFB1001CAFB00018AFBF00200F
-:1045700090A900302402000100E050213123003FC7
-:1045800000A040218FB000400080882100C0482159
-:10459000106200148FA70038240B000500A0202112
-:1045A00000C02821106B0013020030210E0000F91A
-:1045B000000000009225007C30A40002108000035F
-:1045C00026030030AE000030260300348FBF0020E9
-:1045D0008FB1001C8FB000180060102103E00008AC
-:1045E00027BD00280E000078AFB000100A0001407F
-:1045F000000000008FA3003C0100202101202821A1
-:1046000001403021AFA300100E0000BFAFB0001476
-:104610000A000140000000003C0580008CA30E1041
-:104620008F840044AC8300208CA20E1803E00008A5
-:10463000AC8200243C0580008CA30E148F840044BF
-:10464000AC8300208CA20E1C03E00008AC82002486
-:104650009382000C1040001B2483000F2404FFF001
-:104660000064382410E00019978B00109784000E26
-:104670009389000D3C0A601C0A00017B0164402301
-:1046800001037021006428231126000231C2FFFFBC
-:1046900030A2FFFF0047302B50C0000E00E448213D
-:1046A0008D4D000C31A3FFFF00036400000C2C03B0
-:1046B00004A1FFF30000302130637FFF0A00017383
-:1046C0002406000103E00008000000009784000EAB
-:1046D00000E448213123FFFF3168FFFF0068382BD9
-:1046E00054E0FFF8A783000E938A000D11400005E7
-:1046F000240F0001006BC023A380000D03E000081D
-:10470000A798000E006BC023A38F000D03E00008E4
-:10471000A798000E03E000080000000027BDFFE896
-:10472000AFB000103084FFFF3C10800093A8002B36
-:10473000AFBF0014A6040144960A0E1630C600FF4F
-:104740008FA90030A60A0146AE050148A206015213
-:10475000A608015AAE0701608FA3002CA6090158D4
-:10476000012020210E000167AE0301543C0210001D
-:10477000AE0201788FBF00148FB0001003E0000874
-:1047800027BD00188F8500002484000727BDFFF88F
-:104790003084FFF83C06800094CB008A316AFFFF2A
-:1047A000AFAA00008FA90000012540232507FFFFC5
-:1047B00030E31FFF0064102B1440FFF700056882F0
-:1047C000000D288034CC400000AC102103E000082C
-:1047D00027BD00088F8200002486000730C5FFF83F
-:1047E00000A2182130641FFF03E00008AF8400001E
-:1047F0008F8500448F8A003C27BDFFB03C048000B9
-:10480000AFB70044AFB40038AFB1002CAFBF004821
-:10481000AFB60040AFB5003CAFB30034AFB200302C
-:10482000AFB000288C8701048CA90024AC8A0080DA
-:104830008CA8002000E988230000B821AC880E1065
-:104840008CA600240000A021AC860E188C820E10CD
-:10485000AC820E148C830E18AC830E1C122000FB4D
-:104860003C168000936B0008116000F1000000000E
-:10487000976E001031CDFFFF022D602B158000ECEC
-:104880000000000097700010320FFFFFAECF0E0047
-:104890003C0580008CB30000327200081240FFFD1E
-:1048A0000000000094B50E088CA70E0432A5FFFF8F
-:1048B00030B40001128000E1000000000000000D93
-:1048C00030B9A040241800401338011730B4A000BC
-:1048D000128000DC000000009373000812600008E2
-:1048E00000000000976900103122FFFF00E2202B3A
-:1048F0001080000330A6004010C000D2000000006D
-:10490000A7850040AF870038936A0008022038214D
-:10491000AFB10020154000F127B40020AF60000CBB
-:104920009785004030B14000162000022403001695
-:104930002403000E24154007A363000AAF7500147A
-:10494000939000428F6F0014321900010019C24089
-:1049500001F84025AF680014978700408F6300146A
-:1049600030EE0010006E6825AF6D0014978C00408B
-:10497000318B000811600165000000008F65001494
-:104980003C0B10003C0A800000AB8825AF7100147E
-:1049900095460E0A3C0981002413000E30C2FFFF29
-:1049A00000492025AF640004A3730002937F000A2E
-:1049B0003406FFFC27F20004A372000A978D004022
-:1049C00031AC200011800157000000003C0780003E
-:1049D000978D004094EC0E0C97910040000D5842CA
-:1049E0003185C000316A000300051303322910002D
-:1049F00001429825000922030264F825001F90C097
-:104A0000A7720012979500409379000A00158182E1
-:104A10003218003C0319782125E8003CA3680009FE
-:104A200094EE0E0C31C33FFFA76300109763001292
-:104A30009367000900E3702125CD000231AC000727
-:104A4000000C582331650007A365000B9371000922
-:104A500097640012976A0010322200FF8F9100388D
-:104A6000979F004000444821012A98210266902126
-:104A700033F5004012A000053246FFFF00D1402B65
-:104A80003C12800011000016000098210226782BAD
-:104A900015E001368FA700203C1880008F100E14FF
-:104AA0003C058000AF100E108F190E1CAF190E18A8
-:104AB000AF060E008CB200003255000812A0FFFDB8
-:104AC0000000000094BF0E0800C088210000902163
-:104AD000A79F00408CA60E0424130001AF86003867
-:104AE000976900103135FFFF8E8C00000191202363
-:104AF00010800118AE8400009367000814E000D80D
-:104B0000000000000E0001B4240400108F8E004845
-:104B10003C0332000040282131C600FF00063C0063
-:104B200000E3602525CD0001AF8D0048AC4C0000AE
-:104B30009362000997640012937F000A304A00FFD5
-:104B4000308BFFFF014B48210009CC0033F000FF00
-:104B50000330C025ACB800048F8F00489788004010
-:104B60003103200010600103ACAF0008976F001202
-:104B700031E8FFFF06400101ACA8000C979000400F
-:104B80003205000814A0000226280006262800028C
-:104B90003C048000948B0E148C850E1C8F670004DF
-:104BA000936A00023164FFFF314900FFAFA9001092
-:104BB0008F7F0014AFA80018AFBF00140E00019A39
-:104BC00000000000240400100E0001C800000000D6
-:104BD0008E92000016400005000000008F7900143E
-:104BE0002405FFBF0325A024AF7400148F69000CB7
-:104BF0000135F821AF7F000C9375000816A000085E
-:104C00000000000012600006000000008F6B00141E
-:104C10003C0CEFFF3584FFFE01645024AF6A0014A2
-:104C2000A37300088FA700200A000316022020218A
-:104C3000AED10E000A0001F83C05800014E0FF210F
-:104C400030B9A0400E0001600000A0212E910001AB
-:104C50000237B02512C000178FBF00488F85003C77
-:104C600024170F0010B700CD3C0480008C99017808
-:104C70000720FFFE24150F0050B500EB3C04800018
-:104C80008C890E14240502403C141000AC890144A8
-:104C90008C9F0E1CAC9F0148A0800152A480015A39
-:104CA000AC800160A4800158AC850154AC940178BB
-:104CB0008FBF00488FB700448FB600408FB5003CCF
-:104CC0008FB400388FB300348FB200308FB1002C16
-:104CD0008FB0002803E0000827BD00508F910038F6
-:104CE000979300403C1280000220A821326A0040C5
-:104CF0001540FF7D00009821976B00108F850038CC
-:104D00003162FFFF104500A2000020210080A02199
-:104D1000108000E500E088211620FED2000000008F
-:104D20000A0002E72E9100013C0380008C7F01788D
-:104D300007E0FFFE240408008F860000AC640178C1
-:104D40003C038000946C008A318BFFFF0166502386
-:104D50002549FFFF31281FFF2D0200081440FFF9ED
-:104D6000000000008F8E0048346F40008F83003CAD
-:104D700000E0A021240D0F0025C70001AF870048E7
-:104D800000CF3021023488233C08800031D500FF59
-:104D9000106D000524070001939300423272000158
-:104DA0000012824036070001001514003C09010082
-:104DB00000492025ACC400008F9F004830B9003660
-:104DC00030B80008ACDF00041300009000F998250B
-:104DD00095070E0A8F8E00003C03810030EDFFFF27
-:104DE00025CB000801A328253C0C1000316A1FFFC9
-:104DF000269200062406000EAD050160026C98257F
-:104E0000A506015AAF8A0000A51201581620000815
-:104E10003C1080008F99003C24180F00533800028A
-:104E200024170001367300400E0001593C10800029
-:104E30008E1F0E1402402021AE1F01448E120E1C44
-:104E4000AE120148A2150152AE1301540E000167C3
-:104E50003C151000AE1501780A000319000000008F
-:104E600093780009976300129368000B330F00FFDB
-:104E700001E33821310200FF00E2702125D0000A51
-:104E80003210FFFF0E0001B4020020218F8600487F
-:104E90003C1941003C07800024CD0001AF8D004843
-:104EA000936C00099764001230C600FF318A00FF3E
-:104EB000308BFFFF014B482100062C00253F0002EC
-:104EC00000BFC02503197825AC4F00008F68000C87
-:104ED00094EE0E1401121825AC4300048CE50E1C50
-:104EE0008F670004936D000231C4FFFF31AC00FFF7
-:104EF000AFAC00108F620014AFB100180E00019A21
-:104F0000AFA200140A0002C502002021AF60000415
-:104F1000A3600002978D004031AC20001580FEABED
-:104F200000003021A7600012979000409378000A9B
-:104F30003C03800032191F000019798301F84021D9
-:104F400025070028A3670009946E0E0C0A00025E74
-:104F5000A76E00108F6E001435CD00400E00015971
-:104F6000AF6D00140A000291000000000A00031651
-:104F7000000020210641FF01ACA0000C8CB8000C01
-:104F80003C198000031990250A0002B2ACB2000C53
-:104F9000000090210A00028D2413000112800005F8
-:104FA0003C0D800095A60E0830D3004012600042F0
-:104FB000000000008C9001780600FFFE0000000059
-:104FC00094920E103C030500240720003258FFFF86
-:104FD00003037825AC8F014C8C880E143C0E100016
-:104FE000AC8801448C820E1CAC820148A080015226
-:104FF000A480015AAC800160A4800158AC870154A0
-:10500000AC8E01780A0002EE3C0480008F90000014
-:1050100026920002A5120158260F000831E81FFF52
-:105020000A000356AF880000AC80014C12800019C2
-:10503000000000008C8A0E10AC8A01448C830E188C
-:105040003C0C800024160040AC8301488FBF004810
-:10505000A18001528FB70044A580015A8FB5003C52
-:10506000AD8001608FB40038A58001588FB3003443
-:10507000AD9601548FB200308FB600408FB1002C36
-:105080008FB000283C04100027BD005003E000084A
-:10509000AD8401788C8B0E14AC8B01448C830E1C78
-:1050A0000A0003E43C0C80000E0001602E91000118
-:1050B0000A0002E80237B025000000000000000DE1
-:1050C000000000002400033A0A0003C03C048000F2
-:1050D00027BDFFE0AFBF001C3C1F20FF3C07600066
-:1050E0003C0980002402001037F9FFFDACE23008D3
-:1050F000AFB20018AFB10014AFB00010AD390E0060
-:10510000000000000000000000000000000000009F
-:10511000000000003C1800FF3712FFFDAD320E000A
-:105120003C0B60048D7050002411FF7F3C0E000288
-:105130000211782435EC380C35CD0109ACED4C1852
-:10514000240A0009AD6C50008CE80438AD2A000830
-:10515000AD2000148CE54C1C3106FFFF38C42F71C4
-:1051600000051E023062000F2486C0B31040000705
-:10517000AF8200088CE54C1C3C09001F3528FC0060
-:1051800000A81824000321C2AF8400048CF1080891
-:105190003C0F57092412F0000232702435F0001041
-:1051A00001D0602601CF68262DAA00012D8B0001B9
-:1051B000014B382550E00009A380000C3C02601C24
-:1051C0008C590008241F0001A39F000C33387C0079
-:1051D000A7980010A780000EA380000DAF800048A4
-:1051E00014C00003AF8000003C066000ACC0442C3B
-:1051F0000E0004B63C1080000E000DDF0000000021
-:105200003C110800263138C83C12080026523948A3
-:105210008E05000038A30001306400011480FFFCFB
-:10522000000000008E0601003C0C800A240AFF806A
-:1052300024C7024030EB007F016C482100EA402483
-:10524000AE060020AF890044AE0800243C03800075
-:10525000AF86003C8C6D017805A0FFFE2419080084
-:10526000AC79017890780108A3980042938F0042AE
-:1052700031EE000111C0000F240D0D0024C2F80012
-:105280002C5F030113E0001C000629C224A3FFF0D9
-:1052900000032042000431400E0001CF00D1D8218C
-:1052A0003C0440003C068000ACC401380A000457AE
-:1052B0000000000010CD0026240E0F0010CE002AA2
-:1052C0003C028008345F008093F90000240F0050F6
-:1052D000333800FF170FFFF33C0440000E000912A3
-:1052E000000000003C0440003C068000ACC40138D3
-:1052F0000A000457000000008F83000400A3402B25
-:105300001500000B8F8B0008006B50212547FFFF15
-:1053100000E5482B1520000600A36023000C29405F
-:105320000E0001CF00B2D8210A00047C3C044000EA
-:10533000000000000000000D00000000240003AD8C
-:105340000E0001CF000000000A00047C3C04400075
-:105350003C1B0800277B3A480E0001CF00000000EC
-:105360000A00047C3C0440003C1B0800277B3A6890
-:105370000E0001CF000000000A00047C3C04400045
-:10538000000411C003E00008244202403C0408006D
-:1053900024843AAC2405001A0A00006D0000302174
-:1053A00027BDFFE0AFBF001CAFB20018AFB10014C3
-:1053B000AFB000103C108000920B01092412FF8056
-:1053C0000E0004B33164007F8F91003C00515021E6
-:1053D00001524024AE080024920301090E0004B3D8
-:1053E0003064007F24060080240700C024040040AD
-:1053F000AE000810AE040814AE060818AE07081C6C
-:10540000920C01090051F82133F8007F3C19800A01
-:10541000031910213184007F0E0004B3AF820044D1
-:105420008E1101003C0C008035850001022278219C
-:1054300001F24824AE0908048E0E010035980002DE
-:105440003609090001C2682131AB00780165502599
-:10545000AE0A08208E0501008E080100360509807D
-:10546000010218212464004000923024AE0608088E
-:105470008E07010000E2F82127F90040333200785E
-:1054800002588825AE1108248E040100952F000CC7
-:105490008FBF001C8FB2001831EEFFFF000E69C0F5
-:1054A000AE0D0800AE0C0828952B000C8FB100142F
-:1054B000316AFFFF000A41C0AE08002C8CA30050E7
-:1054C0008FB000108CA2003C8D2400048CA6001C20
-:1054D0008CA7003827BD0020AF830060AF8200504A
-:1054E000AF84004CAF86005803E00008AF87005C33
-:1054F0003C0A0800914A3AD13C09080095293ACA69
-:105500003C051100000A3C002528000200E8302577
-:1055100000C5182524820008AC83000003E00008C1
-:10552000AC8000043C098000352809009107001177
-:10553000240200280080502130E300FF00A06821F1
-:1055400000C0602110620002340B86DD240B0800CD
-:105550003C07800034E20A9A9443000034F80A9C25
-:1055600034E60AA03079FFFFAD5900008F0F00002C
-:1055700034E80A8024040001AD4F00048CCE000002
-:10558000AD4E00089105001930A3000310640046D9
-:1055900028690002152000B5240400021064009060
-:1055A000240500031065009B34E40AA43C090800AC
-:1055B00095293AC024070800516700503C18800024
-:1055C0003C0280003459090093280012932E0019E0
-:1055D00034580980310F00FF8F06002801EC182194
-:1055E000000338803124FFFF31CB00FF00E410219D
-:1055F000000B2D0000A6C02500027C003C086000C6
-:105600000308182535E906FFAD430000AD49000445
-:105610008F2E002C3C0380003478093CAD4E0008EE
-:105620008F27003025490028346E0900AD47000C53
-:105630008F2B0034AD4B00108F240038AD44001484
-:105640008F25001CAD4500188F220020AD42001CA4
-:105650008F26002425220014AD4600208F28002824
-:10566000AD4800248F0F0000AD2D0004AD2F0000C9
-:105670008C64010CAD24000891C700123C050800A1
-:1056800090A53AD0AD20001030EB00FF016C302126
-:1056900000066F000005CC0001B96025358AFFFFC8
-:1056A00003E00008AD2A000C3C09080095293AC027
-:1056B0003C19080097393ACA34E20AA43C060800AB
-:1056C00094C63ABC944F00003123FFFF0323C0214E
-:1056D00003067023000F3C0025C8FFF200E82825D0
-:1056E00024070800AD45000CAD400010AD4B001480
-:1056F0001567FFB3254A00183C18800037080900D9
-:10570000910F00119107001937030A8031EE00FF55
-:105710003C19080097393AC6946F002A000E588247
-:1057200030E400FF97870054000B160000042C00A3
-:105730003126FFFF0326C02100454825013870258A
-:1057400001E758213C03400001C32025000B2C0039
-:10575000AD440000AD450004910200183C0600066F
-:105760003C0380000002CE000326C025AD5800088F
-:105770008D0F002C3478093C24E90001AD4F000C5A
-:105780008D0B001C312E7FFF25490014AD4B0010FE
-:105790008F0F0000AD2D0004A78E0054AD2F000028
-:1057A0008C64010C346E090025220014AD2400081D
-:1057B00091C700123C05080090A53AD0AD2000101A
-:1057C00030EB00FF016C302100066F000005CC00BB
-:1057D00001B96025358AFFFF03E00008AD2A000CFF
-:1057E00034E90AA495240000950200283C09080029
-:1057F00095293AC000041C000002CC0034788100D6
-:10580000032B7825AD58000CAD4F00100A00054061
-:10581000254A00143C09080095293AC03C050800B7
-:1058200094A53ACA3C06080094C63ABC9499000074
-:105830003123FFFF9518002800A31021004678238C
-:1058400000193C000018440025EEFFEE010E28254B
-:1058500034E48100AD44000CAD450010AD400014AF
-:10586000AD4B00180A000540254A001C1460FF4F8C
-:1058700034E60AA494CE00003C09080095293AC0F9
-:10588000000E4400010B3825AD47000C0A0005400E
-:10589000254A001003E00008240207D027BDFFE0DE
-:1058A000AFB20018AFB10014AFB00010AFBF001C12
-:1058B0000E00004D008088218F8800508F87004C9B
-:1058C0003C05800834B20080011128213C10800082
-:1058D00024020080240300C000A72023AE02081881
-:1058E0003C068008AE03081C18800004AF850050F9
-:1058F000ACC500048CC90004AF89004C122000091B
-:10590000360409800E0005F800000000924C0027C4
-:105910008E0B007401825004014B3021AE46000C06
-:10592000360409808C8E001C8F8F005801CF6823AD
-:1059300019A000048FBF001C8C90001CAF90005871
-:105940008FBF001C8FB200188FB100148FB00010F1
-:105950000A00004F27BD00208F8600608F83005013
-:105960008F82004C3C05800834A40080AC86005037
-:10597000AC83003C03E00008ACA200043C03080038
-:105980008C63005427BDFFF8308400FF24620001BF
-:1059900030A500FF3C010800AC22005430C600FFD7
-:1059A0003C0780008CE801780500FFFE3C0A7FFF81
-:1059B000A3A400038FA400003549FFFF0089182429
-:1059C000000647C000681025AFA2000090F9010A48
-:1059D000A3A000023C1880FFA3B900018FAE000015
-:1059E00030AD007F370FFFFF01CF5824000D660058
-:1059F0003C090020016C5025352620002405FF803D
-:105A00003C04100027BD0008ACEA014CACE6015490
-:105A1000A4E00158A0E5015203E00008ACE40178DD
-:105A2000308800FF3C03800030A400FF8C620178C6
-:105A30000440FFFE000000003C03800034660A00C2
-:105A40008CCA0020346709800004482BAC6A0144EA
-:105A50008CC5002400091540AC650148A0680150C0
-:105A600090E4004CA064016D03E00008A4600158BC
-:105A700027BDFFE8308400FFAFBF00100E00065BBB
-:105A800030A500FF8F8300508FBF00103C058000C1
-:105A9000344600402404FF903C02100027BD00184B
-:105AA000ACA3014CA0A40152ACA6015403E0000831
-:105AB000ACA2017827BDFFE03C088008AFBF001C06
-:105AC000AFB20018AFB10014AFB0001035100080B5
-:105AD0008E0600183C078000309200FF00C720258A
-:105AE000AE0400180E00004D30B100FF9203000517
-:105AF000346200080E00004FA2020005024020217F
-:105B00000E00066F02202821024020218FBF001CBA
-:105B10008FB200188FB100148FB00010240500055B
-:105B2000240600010A00063227BD00203C05800043
-:105B300034A309809066000830C200081040000FAE
-:105B40003C0A01013549080AAC8900008CA80074A0
-:105B5000AC8800043C07080090E73AD030E500101C
-:105B600050A00008AC8000083C0D800835AC0080D7
-:105B70008D8B0058AC8B00082484000C03E00008D7
-:105B8000008010210A0006B22484000C27BDFFE823
-:105B90003C088000AFB00010AFBF0014350609808C
-:105BA00090C70009240200063509090030E300FF10
-:105BB0000080802100A06021240B00041062007985
-:105BC0002407000294CF005C3C0E020431EDFFFF7D
-:105BD00001AE5025AE0A000090C5000830A4002098
-:105BE000108000080000000090C2004E3C1F01031E
-:105BF00037F90300305800FF03193025240B000843
-:105C0000AE06000491390011912600129124001172
-:105C1000333800FF0018708230CF00FF01CF5021D1
-:105C2000014C6821308800FF31AAFFFF39030028AA
-:105C3000000A28801460002B0205402391240012E2
-:105C40003C0E800035D90980308500FF00AC18215A
-:105C500000031080004BF821001F8400360906FF66
-:105C6000AD09000435C9090091260011912F0012D9
-:105C7000000BC0828F2B003431ED00FF8DC4010C6E
-:105C800001AC282100B810210164F823000784002A
-:105C900000021F000070C82533E9FFFF30CF00FC71
-:105CA000032970250158202101E868210004508053
-:105CB000ADAE000C0E00004D010A80213C078008AB
-:105CC000240C000434EB00800E00004FA16C00098E
-:105CD000020010218FBF00148FB0001003E00008F5
-:105CE00027BD001891250011912300193C180800C8
-:105CF00097183AC630A200FF0002F882307000FF09
-:105D0000001FCE0000104C000329302500D870255C
-:105D10003C0F400001CF68253C0E8000AD0D000017
-:105D200035C9090091260011912F001235D909803B
-:105D3000000BC08231ED00FF8F2B00348DC4010CAD
-:105D400001AC282100B810210164F8230007840069
-:105D500000021F000070C82533E9FFFF30CF00FCB0
-:105D6000032970250158202101E868210004508092
-:105D7000ADAE000C0E00004D010A80213C078008EA
-:105D8000240C000434EB00800E00004FA16C0009CD
-:105D9000020010218FBF00148FB0001003E0000834
-:105DA00027BD00180A0006C42407001227BDFFD033
-:105DB000AFB50024AFB40020AFB3001CAFB00010EB
-:105DC000AFBF0028AFB20018AFB100143C0680008E
-:105DD00090C3010B309300FF30B400FF30620030FD
-:105DE0000000A821104000820000802134C40980F6
-:105DF0009088000800083E0000072E0304A000A9B8
-:105E0000240400048F8700503C010800A0243AD0ED
-:105E10003C0C8000AD8000483C038000906E010B7C
-:105E200031C5002010A000073C0C800034780980A8
-:105E30009312000800128E0000117E0305E000AEF0
-:105E40003C028008918B010B3586098090C40008C4
-:105E5000316A0040000A482B3088000824110003F2
-:105E60001500000200E99023000088213C03800017
-:105E700034780A80346A09009707002C9144001195
-:105E80009149001293050018309F00FF312800FF50
-:105E9000022810210002C880930D0018033F7821CA
-:105EA00001F0702130B000FF01D01821A787005405
-:105EB0003C010800A42E3AC63C010800A4233AC8BD
-:105EC00015A00003246B000A0000000D246B000ADB
-:105ED0003170FFFF3C010800A4233ACA3C010800CE
-:105EE000A4203AC03C010800A4203ABC0E0001B432
-:105EF000020020210E00050F00402021004020213B
-:105F0000024028210E00051C022030210E00069EB2
-:105F10000040202116A0005F004020210E0001C893
-:105F2000020020213C11080092313AD032350003A2
-:105F300012A000163C0A80088F8700503C0E800893
-:105F400035CD008024EC0001ADAC003C3C05800860
-:105F50008CA600040180202100CC90231A4000026E
-:105F6000AF8C00508CA400040E0005F8ACA4000413
-:105F70003C1980008F3800743C0F800835F0008099
-:105F800000582821AE05000C3C0A800835420080EC
-:105F90000260202102802821A040006B0E00065BD9
-:105FA0003C1380008F840050345F0006AE64014CC7
-:105FB0008F8800483C1410008FB50024250900018B
-:105FC000AF8900488FB20018A26801528FB1001447
-:105FD000AE7F01548FB00010AE7401788FBF0028DF
-:105FE0008FB400208FB3001C03E0000827BD0030F1
-:105FF00034C30980906F0008000F7600000E6E0316
-:1060000005A0003334C209009059001B241F001062
-:106010003C010800A03F3AD0333800021300FF7E55
-:106020008F8700508F83005C1467FF7C3C038000E7
-:106030000E00004D000000003C098008352500805E
-:1060400090A4000924070016308800FF1107000DF6
-:106050000000000090A600093C0C0800918C3AD08A
-:10606000240A000830C400FF358B00013C01080001
-:10607000A02B3AD0108A002F240D000A108D002882
-:106080002402000C0E00004F000000000A00075917
-:106090008F8700500E0006B6022028210A00079ABA
-:1060A000000000003C0B8008356A00808D470054DA
-:1060B0008CC9010C1120FF54AF8700502406001436
-:1060C0003C010800A0263AD00A0007583C0C80008A
-:1060D00090710008241200023C010800A0323AD05E
-:1060E000323000201200000B241500018F87005071
-:1060F0000A00075924100008345900808F23003803
-:10610000AC4300048C5F0004AF3F003C0A0007640E
-:106110003C0C80008F8700500A00075924100004AF
-:10612000A0A200090E00004F000000000A0007595D
-:106130008F870050240200140A00081CA0A2000946
-:1061400027BDFFE8AFBF0014AFB000103C108000C7
-:1061500092020109240500010E00065B304400FF95
-:106160003C1F800893F8000E37E3008093F9000F7E
-:10617000906E002693E9000A332F00FF0018660096
-:10618000000F6C0031CB00FF018D5025000B320059
-:1061900001463825312800FF3445600000E82025FD
-:1061A0002402FF813C031000AE04014C8FBF001499
-:1061B000AE050154A2020152AE0301788FB0001067
-:1061C00003E0000827BD001827BDFFE8308400FF6A
-:1061D000AFBF00100E00065B30A500FF3446004044
-:1061E0003C0480002405FF92AC860154A085015236
-:1061F0008F8300508FBF00103C02100027BD001895
-:10620000AC83014C03E00008AC82017827BDFFD8C5
-:10621000AFB20018AFB10014AFB00010AFBF002094
-:10622000AFB3001C3C07800090E20109308600FFFC
-:1062300030B000FF000618C23204000230710001C5
-:1062400014800007305200FF3C098008353300807D
-:10625000926800053105000810A0000C30CA00103B
-:10626000024020210E000680022028212402000185
-:106270008FBF00208FB3001C8FB200188FB10014A5
-:106280008FB0001003E0000827BD00281540003043
-:1062900034E50A008CB900248CB800081338004794
-:1062A000000040213C0E800835D30080926D0068CC
-:1062B000240B000231AC00FF118B00803C068000F3
-:1062C000927F004C90C40109509F00043213007C5F
-:1062D00011000067000000003213007C1660005AB5
-:1062E0000240202116200008320C00013C078000EB
-:1062F00034EB0A008D6500248CE8010414A8FFDC4F
-:1063000000001021320C00011180000D02402021FC
-:106310003C1080008E0E010C8F8D006011CD0008A6
-:10632000000000000E00073E022028218E0F010C05
-:106330003C18800837100080AE0F0050024020212A
-:106340000E00066F022028210A00086F24020001B7
-:106350003C0708008CE7006424E600013C010800CB
-:10636000AC2600641600000D000000000220282169
-:106370000E00066F02402021926F0068240D00027B
-:1063800031EE00FF11CD0022024020210E00082333
-:10639000000000000A00086F240200010E00004106
-:1063A00024040001926C0025020C58250E00004FB9
-:1063B000A26B00250A0008AF022028218E63001876
-:1063C0008CE401048CBF002400031602149FFFB567
-:1063D0003045007F9269004C264400013093007FD5
-:1063E00012650040312300FF1464FFAF3C0E8008AB
-:1063F000264800013111007F310200FF1225000BF9
-:1064000024080001004090210A00087C24110001AA
-:10641000240500040E000632240600010E000823A5
-:10642000000000000A00086F240200012407FF801A
-:106430000247282400A79026324200FF0040902106
-:106440000A00087C241100010E00073E02202821CA
-:106450003206003010C0FFA332100082024020211B
-:106460000E000680022028210A00086F2402000185
-:106470008E6300180240202102202821006610258A
-:106480000E000845AE6200189264004C240500031B
-:10649000240600010E000632308400FF0E00004189
-:1064A00024040001926A0025020A48250E00004FCC
-:1064B000A26900250A00086F240200018E780018E6
-:1064C0003C19800002402021031978250220282150
-:1064D0000E00066FAE6F00189264004C0A0008F7B9
-:1064E000240500043246008038CA0080146AFF6E1A
-:1064F0003C0E80080A0008D02648000127BDFFC0D6
-:10650000AFB000183C108000AFBF0038AFB7003408
-:10651000AFB60030AFB5002CAFB40028AFB3002445
-:10652000AFB200200E0004BBAFB1001C9204010802
-:106530009205010B308400FF0E00085630A500FFC5
-:10654000144000E38FBF00383C09800835280080E4
-:10655000A100006B3607098090E60000240200507D
-:106560003C17080026F73A8830C300FF3C130800A8
-:1065700026733A98106200033C1080000000B82196
-:1065800000009821241F001036110A0036140980DB
-:106590008E1601048F8D00508E38002436190A8023
-:1065A0008E9200203C010800A03F3AD0972C002C8E
-:1065B0008EF50000932B0018024D702302D878232B
-:1065C0003C010800AC2F3AAC3C010800AC2E3AB0BC
-:1065D0003C010800AC2D3AD4A78C005402A0F80965
-:1065E000317200FF304A0002154000E630450001DC
-:1065F00010A000C100000000928A0008315000087D
-:1066000016000002241400030000A0213C068000B4
-:1066100034C4090034C30A008C6E00249085001134
-:10662000908200129099001130B800FF305100FFA5
-:106630000291F821001FB080332F00FF02D85821AB
-:10664000024FA82126AC0010017268213C15800081
-:106650003C010800AC2E3AD83C010800A42D3AC8F1
-:106660003C010800A42C3AC43C010800A42B3AC603
-:1066700036B609808F8700508F8900588ED200204F
-:106680002408000601273023024728233C01080084
-:10669000AC283ACC04C000B30000902104A000B1A3
-:1066A00000C5802B120000B3000000003C01080070
-:1066B000AC263AB08E7100000220F80900000000FC
-:1066C000304A00021540007400408021304B000128
-:1066D000556000118E7100043C0D08008DAD3AB478
-:1066E0003C0EC0003C04800001AE6025AEAC0E0044
-:1066F0008C980000330F000811E0FFFD000000003F
-:10670000949F0E0824120001A79F00408C990E044C
-:10671000AF9900388E7100040220F80900000000D3
-:106720000202802532020002144000A9000000008D
-:106730003C08080095083ABC3C11080096313AC85C
-:106740003C09080095293ABE3C0308008C633AB422
-:10675000011168213C1F08008FFF3AD83C07080050
-:1067600094E73AD23C11800001A920218E38010C17
-:10677000006828212499000200A7702103E37821F2
-:10678000AF9800603C010800AC2F3AD83C010800EB
-:10679000A42E3AC03C010800A42D3ACA0E0001B450
-:1067A0003324FFFF8F8C0048004020213C0108006B
-:1067B000A02C3AD18E620008258B0001AF8B0048D7
-:1067C0000040F809000000008F8500500280302151
-:1067D0000E00051C004020210E00069E00402021D6
-:1067E0008E6A000C0140F809004020213C08080096
-:1067F00095083ACA3C09080095293ABE0109382192
-:1068000024E600020E0001C830C4FFFF3C0408006B
-:106810008C843AAC3C0308008C633AB40083282390
-:106820003C010800AC253AAC14A0000600000000B2
-:106830003C0A08008D4A3ACC354600403C0108002D
-:10684000AC263ACC124000418F8C00448E2B0E10A7
-:106850008F920044AE4B00208E220E18AE420024D0
-:106860003C04080094843AC00E0005FA00000000C1
-:106870008F9900508E7800103C010800AC393AD452
-:106880000300F809000000003C0F08008DEF3AAC4F
-:1068900015E0FF798F870050979400543C13800EC9
-:1068A000321500100E000629A674002C56A00044D4
-:1068B0008EF60004321F004057E0001D8EF00008E5
-:1068C0008EE3000C0060F809000000008FBF003864
-:1068D0008FB700348FB600308FB5002C8FB40028EE
-:1068E0008FB300248FB200208FB1001C8FB000182E
-:1068F00003E0000827BD0040920901098F88003C91
-:1069000000093E0000E83025AE0600808E230020FE
-:106910008E240024AFA30010AE030E148FA200102B
-:10692000AE020E10AE040E1C0A000951AE040E1881
-:106930000200F809000000008EE3000C0060F80976
-:10694000000000000A000A078FBF0038240E000173
-:10695000240D0001A5800020A58E00220A0009EB6D
-:10696000AD8D00243C010800AC203AB00A0009813A
-:106970008E7100003C010800AC253AB00A00098184
-:106980008E71000092110109000028210E00066F8F
-:10699000322400FF8FBF00388FB700348FB600302D
-:1069A0008FB5002C8FB400288FB300248FB2002045
-:1069B0008FB1001C8FB0001803E0000827BD004015
-:1069C00002C0F809000000000A000A01321F00405E
-:1069D0005240FFB2979400548EB60E148F93004429
-:1069E000AE7600208EB40E1CAE7400240A0009FAA4
-:1069F000979400548F8200140004218003E0000863
-:106A0000008210213C07800834E200809043006936
-:106A100000804021106000093C0401003C07080090
-:106A20008CE73AD48F83003000E3202304800008F1
-:106A30009389001C14E300030100202103E00008F7
-:106A4000008010213C04010003E0000800801021B8
-:106A50001120000B006738233C0D800035AC098005
-:106A6000918B007C316A000211400020240900341F
-:106A700000E9702B15C0FFF10100202100E9382347
-:106A80002403FFFC00A3C82400E3C02400F9782BF2
-:106A900015E0FFEA0308202130C40003000410239E
-:106AA00014C00014304900030000302100A97821EF
-:106AB00001E6702100EE682B11A0FFE03C0401000C
-:106AC0002D3800010006C82B010548210319382480
-:106AD00014E0FFDA2524FFFC2402FFFC00A21824A6
-:106AE0000068202103E00008008010210A000A6FDE
-:106AF000240900303C0C80003586098090CB007C56
-:106B0000316A00041540FFE9240600040A000A7EE9
-:106B1000000030213C0308008C63005C8F82001869
-:106B200027BDFFE8AFBF001410620005AFB0001032
-:106B3000000329C024A40280AF840014AF8300188E
-:106B40003C10800036030A00946500320E000A50A3
-:106B500030A43FFF8E0401003C180080370F000373
-:106B60000082C8212402FF80032260243329007F91
-:106B7000000CF94003E94025332E00783C0D10004D
-:106B8000010D502501CF5825AE0C0028360809808C
-:106B9000AE0C080CAE0B082CAE0A0830910300694D
-:106BA0003C06800C0126382110600006AF870034B7
-:106BB0008D09003C8D06006C0126382318E0007F0B
-:106BC000000000003C0C8008358B00803C0A8000EF
-:106BD000A1600069355009808E0200383C068000B3
-:106BE00034C50A0090AD003C31A800201100001906
-:106BF000AF820030240E00013C19800037300A00BB
-:106C0000A38E001CAF8000248E0400248F850024F6
-:106C100024180008AF800020AF8000283C01080045
-:106C2000A4383ABE3C010800A4203AD20E000A540F
-:106C300000003021920F003C8FBF00148FB0001075
-:106C4000000F7142AF82002C27BD001803E000083E
-:106C500031C2000190B90032240F0001333800FF27
-:106C600000182182108F003F241F0002109F006235
-:106C700034C20AC03C03800034640A008C990024AA
-:106C80001720001D3466090090830030241F000582
-:106C90003062003F105F004C240500018F86002009
-:106CA000A385001CAF860028AF8600243C19800015
-:106CB00037300A008E0400248F8500242418000831
-:106CC0003C010800A4383ABE3C010800A4203AD296
-:106CD0000E000A5400000000920F003C8FBF001409
-:106CE0008FB00010000F7142AF82002C27BD00183A
-:106CF00003E0000831C200018C8800088C8D00245C
-:106D00008CCB00643C19800037300A00AF8B002424
-:106D1000A380001C8E0400248F8600208F85002411
-:106D2000010D602324180008AF8C00283C010800E6
-:106D3000A4383ABE3C010800A4203AD20E000A54FE
-:106D400000000000920F003C8FBF00148FB00010B5
-:106D5000000F7142AF82002C27BD001803E000082D
-:106D600031C2000190A7003030E3003F506400289A
-:106D700034C50AC08CAA00241540002234C809007A
-:106D80008CAB00483C0C7FFF3585FFFF016510246C
-:106D90003C188000AF820020370509008F8E00204C
-:106DA0008CAF006001CF682B15A0000201C020212C
-:106DB0008CA400600A000AF0AF8400208D02006CF1
-:106DC0000A000ACB3C0680008C8900488F86002090
-:106DD0003C0A7FFF3550FFFF013038243C04800817
-:106DE00024050001AF870028AC80006CA385001C3F
-:106DF0000A000AFEAF8600248C4400140A000AF040
-:106E0000AF8400208D0200680A000B383C18800017
-:106E100034C409808C8600708CB0001400D0482BDC
-:106E200011200004000000008C8200700A000B3862
-:106E30003C1880008CA200140A000B383C1880001B
-:106E40008F85002427BDFFE0AFBF0018AFB100144D
-:106E500014A00008AFB000103C04800034870A0082
-:106E600090E600302402000530C3003F106200B7F6
-:106E7000348409008F91002000A080213C04800010
-:106E8000348E0A008DCD00043C0608008CC63AB052
-:106E900031A73FFF00E6602B5580000100E0302164
-:106EA000938F001C11E0007600D0102B34990980DC
-:106EB0009338007C330400021080007724030034F0
-:106EC00000C3F82B17E000D600C3302300D0102BEE
-:106ED0003C010800A4233ABC1440006D02001821B4
-:106EE0003C0408008C843AAC0064282B54A00001B8
-:106EF000006020213C05800034A90A009128003C54
-:106F00003C010800AC243AB43103002014600002B4
-:106F1000000048218CA90E188F88002C0128502BC6
-:106F20001140005F000000003C0508008CA53AB449
-:106F300000A96021010C582B1160005C00B0682B87
-:106F40000109382300E028213C010800AC273AB4AD
-:106F5000120000032402FFFC10B0008C322A000350
-:106F600000A2F8243C010800A4203AD23C01080009
-:106F7000AC3F3AB403E028218F84002412040006B9
-:106F80003C0380088C6A006C02002021AF91002035
-:106F900025500001AC70006C8F8B00280085882381
-:106FA000AF91002401652023AF8400281220000245
-:106FB00024070018240700103C0E800835C6008006
-:106FC00090CD0068240C00013C010800A0273AD0B5
-:106FD00031A700FF10EC00470000000014800018EB
-:106FE000000028213C0B8000916501093571098062
-:106FF0008E23001830A500FF0003560224A30001D1
-:107000003146007F3070007F1206007E240CFF8026
-:107010003C0F800835E90080A123004C3C080800A3
-:107020008D083ACC240E00023C010800A02E3B1132
-:10703000350D00083C010800AC2D3ACC24050010A9
-:107040003C1F800037E40A009099003C3338002050
-:107050001300000500A02021240200013C010800CB
-:10706000AC223AB434A400018FBF00188FB10014D1
-:107070008FB000100080102103E0000827BD002021
-:107080003C010800A4203ABC1040FF9502001821E2
-:107090000A000B8B00C018210A000B832403003068
-:1070A0003C0508008CA53AB400B0682B11A0FFA8DD
-:1070B000000000003C04080094843ABC008578215C
-:1070C00001E7702B11C000072CA200043C1F6000D8
-:1070D0008FF954043338003F1700FFE324040042C3
-:1070E0002CA200041040FF9A240400420A000BEE78
-:1070F0008FBF00181528FFB9000000008CC20018CF
-:107100003C188000241900020058F825ACDF001854
-:1071100037040A00A0D900689089003C240F0004BD
-:1071200000A01021312800203C010800A02F3B11B5
-:107130001100000224050010240200013C01080097
-:10714000AC223AAC0A000BE43C1F80008F88002878
-:107150008C8900600109282B14A0000201008821FD
-:107160008C9100603C0B80008D640E18240A000195
-:107170000220282102203021A38A001C0E000A547C
-:10718000022080210A000B72AF82002C000A182313
-:1071900012200007306400033C0D800035A70980F1
-:1071A00090EC007C318B000415600019248E0004E3
-:1071B0003C010800A4243AD23C18080097183AD29F
-:1071C0000305202100C4782B11E0FF6C8F8400247C
-:1071D0002CA6000514C0FFA42404004230B900030B
-:1071E0001720000200B9182324A3FFFC3C0108006B
-:1071F000AC233AB43C010800A4203AD20A000BB1F7
-:107200000060282100AC38240A000BD700EC1826B7
-:107210003C010800A42E3AD20A000C4100000000F4
-:107220003C010800AC203AB40A000BED24040042F3
-:107230008F8300283C0B8000356A0A00146000062A
-:1072400000001021914600302405000530C400FFE5
-:10725000108500030000000003E0000800000000AB
-:1072600091490048312800FF000839C214E0FFFAB4
-:107270003C0480083C06080094C63ABC3C03080065
-:107280008C633AD43C0508008CA53AB43C1808003D
-:1072900097183AD20066C8218C8E00040325782105
-:1072A00001F8682101AE60231980001D0000000074
-:1072B0009158004C8F8D0034956E0E10330F00FFE7
-:1072C0008DA9000401CF30238DAA000030CFFFFF2D
-:1072D000000F6100012C28210000382101472021E6
-:1072E00000AC182B0083C821ADA50004ADB9000087
-:1072F00091B8000A01F87021A1AE000A956C0E1237
-:107300008F8A0034A54C00089549003825280001D3
-:10731000A54800389147000D34EB0008A14B000D43
-:1073200003E000080000000027BDFFD8AFB0001840
-:10733000938F001C8FB000143C087FFF8F870024C0
-:107340003C0C80003518FFFFAFBF0020AFB1001C20
-:1073500035990A0002181824932A003C000F5FC0D8
-:107360003C02BFFF2CF000013449FFFF006BF82501
-:107370003C0808008D083AD48F9900303C1808006A
-:1073800097183ACA03E9582400107F803C07EFFFA2
-:107390003C05F0FF016F18253C11800031490020A9
-:1073A00034E2FFFF34ADFFFF362E098027A5001021
-:1073B0002406000201194023270A00020062182453
-:1073C0000080802115200002000058218D8B0E1CAA
-:1073D000A7AA00120500003A2407000030EF00FFC2
-:1073E000000F3F00006740253C028008AFA8001452
-:1073F000344B0080916A00683C0F080091EF3AD14D
-:107400003C09DFFF353FFFFF000A602B3C0208000C
-:1074100094423AC4A3AF0011011FC024000CCF4016
-:10742000031918258FA70010AFA300143C1F0800F4
-:1074300093FF3AD3A7A200168FA8001400ED4824AA
-:107440003C0B01003C0A0FFF012BC82533F8000359
-:10745000354CFFFF010D78243C027000032C3824CA
-:1074600000181E0000E2482501E35825AFAB0014C8
-:10747000AFA9001091DF007CA3BF00150E000063D0
-:1074800000000000362D0A0091A6003C30C4002008
-:1074900010800006260200083C11080096313AC010
-:1074A000262EFFFF3C010800A42E3AC08FBF00200B
-:1074B0008FB1001C8FB0001803E0000827BD002822
-:1074C0008F8A002C016A602B5580FFC424070001BD
-:1074D0000A000CCB30EF00FF9383001C3C028000BD
-:1074E00027BDFFD834480A0000805021AFBF0020DC
-:1074F00034460AC0010028211060000E344409807F
-:1075000091070030240B00058F89002030EC003FEC
-:10751000118B000B00003821AFA900103C0B800834
-:107520008D69006CAFAA00180E00012BAFA90014E2
-:10753000A380001C8FBF002003E0000827BD0028A7
-:107540008D1F00483C1808008F183AB48F99002806
-:107550003C027FFF8D0800443443FFFFAFA90010B9
-:107560003C0B80088D69006C03E3702403197821BB
-:1075700001CF682301A83821AFAA00180E00012B03
-:10758000AFA900140A000D20A380001C3C05800058
-:1075900034A60A0090C7003C3C06080094C63AD2C4
-:1075A0003C0208008C423ACC30E300200006240064
-:1075B0001060001E004438253C0880083505008016
-:1075C00090A3006800003021240800010000202161
-:1075D000240300013C0580008CAC01780580FFFE8F
-:1075E00000000000ACA80148A4A40144A4A30146E3
-:1075F0003C0308008C633AD43C188008370F0080A5
-:10760000ACA3014C3C19080093393AD13C0D100051
-:10761000A0B90152ACA70154A4A6015891EE004CA8
-:10762000A0AE016D03E00008ACAD01788CA80E1C83
-:107630003C0B08008D6B3AB494AA0E1694A90E1454
-:10764000016630213143FFFF0A000D483124FFFF5E
-:107650003C04800034830A009065003C30A2002086
-:107660001040001C0000000000003021000020211C
-:10767000000018213C0580008CA901780520FFFE40
-:1076800000000000ACA601483C0E08008DCE3AD4A4
-:10769000240DFF91240C00403C0B8008A4A301445E
-:1076A000356A0080A4A40146ACAE014CA0AD0152E5
-:1076B000ACAC0154A4A0015890A301099144004C22
-:1076C00090A601093C041000A0A6016D03E000088B
-:1076D000ACA401788C860E1894880E1294870E1034
-:1076E0003104FFFF0A000D7030E3FFFF3C0480000F
-:1076F00034830A009065003C30A200201040002630
-:1077000027BDFFF8240900010000382124080001EA
-:107710003C0680008CC401780480FFFE000000005D
-:1077200090CA01093C04080090843B113C1880FF7A
-:10773000A3AA00038FA300003085007F370FFFFF4F
-:1077400000661025AFA2000090D9010AA3A0000294
-:1077500000056E00A3B900018FAE0000240A3000BE
-:1077600027BD000801CF6024018D5825ACCB014C0A
-:10777000ACCA0154A4C00158ACC90148A4C7014413
-:107780002409FF80A4C801463C081000A0C901528A
-:1077900003E00008ACC801788C890E1894870E129B
-:1077A00094860E1030E8FFFF0A000D9730C7FFFFE8
-:1077B00027BDFFE8AFB000103C108000AFBF001441
-:1077C00036180A00970F00320E000A5031E43FFFCE
-:1077D0008E0E0100240DFF803C04200001C25821C0
-:1077E000016D6024000C4940316A007F012A402568
-:1077F000010438253C048008AE0708303486008038
-:1078000090C500682403000230A200FF104300046A
-:107810008F9F00208F990024AC9F0068AC99006472
-:107820008FBF00148FB0001003E0000827BD0018C0
-:107830003C0A0800254A359C3C09080025293638B1
-:107840003C08080025082A603C07080024E736FCAD
-:107850003C06080024C634243C05080024A5317CDD
-:107860003C04080024842D8C3C030800246334D895
-:107870003C020800244232743C010800AC2A3A90D1
-:107880003C010800AC293A8C3C010800AC283A883D
-:107890003C010800AC273A943C010800AC263AA40D
-:1078A0003C010800AC253A9C3C010800AC243A9805
-:1078B0003C010800AC233AA83C010800AC223AA0E5
-:0878C00003E0000800000000D5
-:0878C800800009408000090066
-:1078D000800801008008008080080000800E000001
-:1078E000800800808008000080000A8080000A0074
-:0878F0008000098080000900FE
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-mips-09-5.0.0.j9.fw.ihex b/firmware/bnx2/bnx2-mips-09-5.0.0.j9.fw.ihex
new file mode 100644
index 000000000000..36e922ef61d1
--- /dev/null
+++ b/firmware/bnx2/bnx2-mips-09-5.0.0.j9.fw.ihex
@@ -0,0 +1,6058 @@
+:100000000800011008000000000051C4000000C8F2
+:10001000000000000000000000000000080051C4C3
+:10002000000000380000528C080000880800000022
+:10003000000051B4000052C4080053A00000008426
+:100040000000A478080051B4000001C00000A4FC26
+:10005000080031D808000000000081540000A6BC50
+:1000600000000000000000000000000008008154B3
+:100070000000012400012810080004880800040082
+:10008000000017EC0001293400000000000000000F
+:100090000000000008001BEC0000000400014120EB
+:1000A000080000A8080000000000381400014124E6
+:1000B00000000000000000000000000008003814EC
+:0800C000000000300001793856
+:0800C8000A00004400000000E2
+:1000D000000000000000000D636F6D352E302E30E3
+:1000E0006A39000005000002000000000000000363
+:1000F00000000014000000320000000300000000B7
+:1001000000000000000000000000000000000000EF
+:1001100000000010000001360000EA600000000549
+:1001200000000000000000000000000000000008C7
+:1001300000000000000000000000000000000000BF
+:1001400000000000000000000000000000000000AF
+:10015000000000000000000000000000000000009F
+:10016000000000020000000000000000000000008D
+:10017000000000000000000000000000000000007F
+:10018000000000000000000000000010000000005F
+:10019000000000000000000000000000000000005F
+:1001A000000000000000000000000000000000004F
+:1001B000000000000000000000000000000000003F
+:1001C000000000000000000000000000000000002F
+:1001D000000000000000000000000000100000030C
+:1001E000000000000000000D0000000D3C020800AF
+:1001F000244252203C03080024635354AC400000C6
+:100200000043202B1480FFFD244200043C1D080005
+:1002100037BD9FFC03A0F0213C1008002610011000
+:100220003C1C0800279C52200E00025F00000000CA
+:100230000000000D27BDFFE0AFBF0018AFB10014F4
+:10024000AFB000103C04800094820108304370007D
+:10025000240220001062000B2862200114400036A6
+:1002600000001021240240001062002C0000000059
+:10027000240260001062002D000010210A00009D81
+:100280008FBF001834910100922400098E300018AD
+:1002900010800020240300012402000914820006BB
+:1002A0008F82001C3C0280089442001A0002140055
+:1002B000020280258F82001C8C42000C1040001529
+:1002C000000018210E000D45000000008F83001C67
+:1002D000962400088F8200189463001E9625000C57
+:1002E0000004240000832025AC500000AC4500042D
+:1002F000AC400008AC40000CAC400010AC40001416
+:10030000AC400018AC44001C0E000D792404000120
+:10031000000018210A00009C006010210E00042E2D
+:10032000000000000A00009C000010210E000C6577
+:1003300000000000000010218FBF00188FB10014D2
+:100340008FB0001003E0000827BD00208F82001C42
+:1003500027BDFFE0AFB00010AFBF0018AFB1001471
+:100360008C42000C3C1080008E11010010400034C3
+:100370008FBF00180E000D45000000008F8500188B
+:1003800024047FFF0091202BACB100008E030104F8
+:100390009602010800031C003042FFFF006218258E
+:1003A000ACA300049202010A96030114304200FF3C
+:1003B0003063FFFF0002140000431025ACA20008C8
+:1003C0009603010C9602010E00031C003042FFFF51
+:1003D00000621825ACA3000C9603011096020112CE
+:1003E00000031C003042FFFF00621825ACA3001080
+:1003F0008E020118ACA200148E02011CACA20018DF
+:10040000148000088F82001C978200003C042005A5
+:100410000044182524420001ACA3001C0A0000DBA4
+:10042000A78200003C0340189442001E00431025A0
+:10043000ACA2001C0E000D79240400018FBF00182F
+:100440008FB100148FB000100000102103E00008ED
+:1004500027BD00203C0680008CC202B824030001A6
+:1004600004410008008028213C0208008C42006002
+:10047000244200013C010800AC22006003E00008B7
+:10048000006010218C83002094820016ACC302808F
+:100490002442FFFCA4C202843C0208008C42005C9F
+:1004A0008C84000494A3000E244200013C01080047
+:1004B000AC22005C3C021000A4C30286ACC40288DB
+:1004C00000001821ACC202B803E00008006010214F
+:1004D00027BDFFE0AFB000103C108000AFB20018A5
+:1004E000AFBF001CAFB10014361201009243000BE5
+:1004F0002402001A965100081462005A00002821B4
+:1005000032220001104000188F82001C8E42000031
+:10051000000223403C02003F3442FFFF0044102B06
+:10052000104000043C030040964200140A000124DD
+:10053000008320218E030100240201005462000682
+:10054000964200143C028008904200043042000FA2
+:10055000000225009642001400821025AE020080A1
+:100560000A000157000000008C42000C10400028D7
+:10057000000000000E000D4500000000960201087A
+:100580009603010C8F8500183042003E3063FFFF58
+:100590000002140000431025ACA200008E020100EE
+:1005A000ACA20004960301169604010E8F82001C73
+:1005B00000031C003084FFFF00641825ACA3000872
+:1005C00096030110960401129446001E00031C00BD
+:1005D0003084FFFF00641825ACA3000C3C0220000F
+:1005E00000C2302596020114240400013042FFFFAE
+:1005F000ACA200108E020118ACA200149202010BF2
+:10060000304200FFACA200180E000D79ACA6001C11
+:100610003C0208008C420040244200013C010800DA
+:10062000AC2200403C0308008C63004432220002EC
+:1006300032240004246300013C010800AC23004480
+:10064000108000080002282B024020218FBF001CD0
+:100650008FB200188FB100148FB000100A0000E3B1
+:1006600027BD00208FBF001C8FB200188FB100146F
+:100670008FB0001000A0102103E0000827BD00206B
+:1006800027BDFFE0AFB000103C108000AFB20018F3
+:10069000AFBF001CAFB10014361201009243000B33
+:1006A000240200031462006A9651000832220001FD
+:1006B000104000178F82001C8E4300003C02003F58
+:1006C0003442FFFF000323400044102B504000053C
+:1006D00024020100964200143C0300400A00018EEF
+:1006E0000083202154620006964200143C028008D8
+:1006F000904200043042000F000225009642001490
+:1007000000821025AE0200800A0001BE0000000039
+:100710008C42000C10400025000000000E000D452A
+:1007200000000000960201089603010C8F85001856
+:100730003042003E3063FFFF0002140000431025EA
+:10074000ACA200008E020100ACA2000496030116C8
+:100750009604010E8F82001C00031C003084FFFFF2
+:1007600000641825ACA3000896030110960401123A
+:100770009446001E00031C003084FFFF006418250F
+:10078000ACA3000C3C02200000C2302596020114EC
+:10079000240400013042FFFFACA20010ACA0001402
+:1007A000ACA000180E000D79ACA6001C3C0208009D
+:1007B0008C420040244200013C010800AC22004071
+:1007C0003C0208008C420044322300042442000111
+:1007D0003C010800AC2200441060000832220002F4
+:1007E000024020218FBF001C8FB200188FB100146F
+:1007F0008FB000100A0000E327BD00201040001554
+:100800008FBF001C3C0480008C8301043C026020EC
+:10081000AC4300148C420004240301FE304203FF69
+:100820001443000C8FBF001C8C820100000219C20F
+:100830002462FFFC2C420008104000032404000244
+:100840002462FFFD004420043C026000AC446914B3
+:100850008FBF001C8FB200188FB100148FB0001032
+:100860000000102103E0000827BD00203C048000A8
+:100870008C83010024020100506200033C028008C6
+:100880000000000D3C02800890430004000010218D
+:100890003063000F00031D0003E00008AC830080FC
+:1008A0002C8407811080000A000028213C0280006F
+:1008B00094420108240320003042700014430005D4
+:1008C0002783FFB03C02800890420005304500FFBE
+:1008D0002783FFB00005208000832021000510C081
+:1008E000004510238C8400003C030800246352E47C
+:1008F000000210C0004310213C038000AC64009053
+:1009000003E00008AF82001C03E000080000102193
+:1009100003E00008000010212402010014820008F6
+:10092000000000003C0208008C4200FC2442000150
+:100930003C010800AC2200FC0A00022430A2002086
+:100940003C0208008C420084244200013C01080063
+:10095000AC22008430A200201040000830A3001018
+:100960003C0208008C420108244200013C010800BE
+:10097000AC22010803E0000800000000106000083D
+:10098000000000003C0208008C42010424420001E7
+:100990003C010800AC22010403E000080000000054
+:1009A0003C0208008C420100244200013C01080086
+:1009B000AC22010003E000080000000027BDFFE8B2
+:1009C000AFB000103C108000AFBF0014360401002F
+:1009D0009483000830620004104000053066000275
+:1009E0008FBF00148FB000100A0000E327BD00186D
+:1009F00010C00006006028218E0401000E000214C1
+:100A0000000000000A00025B240200018F8200083F
+:100A10008E03010410430007000010218E04010022
+:100A20000E000214000000008E020104AF820008D4
+:100A3000000010218FBF00148FB0001003E00008E9
+:100A400027BD001827BDFFD83C036010AFB3001CC2
+:100A5000AFBF0020AFB20018AFB10014AFB00010AC
+:100A60008C6450002402FF7F3C1308002673524818
+:100A7000008220243484380CAC6450003C02800096
+:100A800024030037AC4300083C06080024C6084095
+:100A9000026010212404001C2484FFFFAC460000E7
+:100AA0000481FFFD244200043C0208002442016C42
+:100AB0003C010800AC2252503C020800244205B818
+:100AC0003C010800AC2252543C020800244202843B
+:100AD0003C010800AC2252903C0208002442040869
+:100AE0003C030800246308483C040800248408F4FC
+:100AF0003C05080024A52C4C3C010800AC2252B057
+:100B00003C020800244207A43C010800AC2652988D
+:100B10003C010800AC2552A43C010800AC2352ACB7
+:100B20003C010800AC2452B43C010800AC2252B88D
+:100B30003C010800AC23524C3C010800AC20525848
+:100B40003C010800AC20525C3C010800AC20526023
+:100B50003C010800AC2052643C010800AC20526803
+:100B60003C010800AC20526C3C010800AC205270E3
+:100B70003C010800AC2452743C010800AC205278BF
+:100B80003C010800AC20527C3C010800AC205280A3
+:100B90003C010800AC2052843C010800AC20528883
+:100BA0003C010800AC26528C3C010800AC26529453
+:100BB0003C010800AC20529C3C010800AC2552A02E
+:100BC0003C010800AC2352A80E00055A00000000AA
+:100BD0008F8300043C0208008C4200201062001F3A
+:100BE000000088212792FFB03C100800261052E434
+:100BF0003C0208008C420020240500010225180454
+:100C0000004320248F820004004310245044000C31
+:100C10002631000110800008AF90001C8E430000B8
+:100C20003C028000AC4300900E000D0CAE05000CA1
+:100C30000A0002DE26310001AE00000C2631000160
+:100C40002E220002261000381440FFE9265200042C
+:100C50003C0208008C420020AF8200043C1080005F
+:100C60008E110000322200071040FFDA8F8300044B
+:100C70003222000110400021322200028E020100C7
+:100C8000AE0200208E020104AE0200A80E0001F6A2
+:100C90008E0401009202010B304300FF2C62001D04
+:100CA00054400004000310800E0002100A0002FFEE
+:100CB00000000000005310218C4200000040F809A1
+:100CC00000000000104000043C0280008C4301043E
+:100CD0003C026020AC4300143C0208008C4200340B
+:100CE0003C0440003C03800024420001AC64013815
+:100CF0003C010800AC2200343222000210400010F7
+:100D0000322200043C1080008E020140AE0200201E
+:100D10000E0001F68E0401400E0003970000000053
+:100D20003C024000AE0201783C0208008C420038D0
+:100D3000244200013C010800AC22003832220004A9
+:100D40001040FFA48F8300043C1080008E020180BD
+:100D5000AE0200200E0001F68E0401808E03018099
+:100D600024020F00146200073C0280088E020188F2
+:100D70003C0300E03042FFFF004310250A00033B24
+:100D8000AE020080344200809042000024030050F4
+:100D9000304200FF14430007000000000E000374FF
+:100DA0000000000014400003000000000E00095D78
+:100DB000000000003C0208008C42003C3C04400063
+:100DC0003C03800024420001AC6401B83C010800EF
+:100DD000AC22003C0A0002C38F8300043C02900056
+:100DE00034420001008220253C028000AC440020F7
+:100DF0003C0380008C6200200440FFFE00000000E5
+:100E000003E00008000000003C02800034430001C1
+:100E10000083202503E00008AC44002027BDFFE04C
+:100E2000AFB10014AFB0001000808821AFBF001830
+:100E30000E00034530B000FF8F83FFA80220202161
+:100E40009062002502028025A07000258C70001899
+:100E50003C0280000E000350020280241600000AAB
+:100E60008FBF00183C0380008C6201F80440FFFE35
+:100E700024020002AC7101C0A06201C43C02100057
+:100E8000AC6201F88FBF00188FB100148FB0001052
+:100E900003E0000827BD002027BDFFE8AFBF00101A
+:100EA0003C0380009462018430420200104000053F
+:100EB000000020210E000FCD000000000A00038A70
+:100EC000240400018C6201880440000A8FBF0010D6
+:100ED0008C6201883C03FF00004310243C030400A3
+:100EE00014430004240400018F82FFA890420008EC
+:100EF0008FBF00100080102103E0000827BD0018FC
+:100F00008F82FFAC2403000124050001A040001AD9
+:100F10008F82FFA8A44300163C0280000A000355FC
+:100F20008C4401408F85FFA827BDFFE0AFBF001CA8
+:100F3000AFB20018AFB10014AFB0001090A2000023
+:100F4000304400FF38830020388200300003182B23
+:100F50000002102B00621824106000053C02800083
+:100F600024020050148200818FBF001C3C028000CC
+:100F700090420148304200FF2443FFFF2C620005ED
+:100F80001040007A8FBF001C000310803C03080053
+:100F9000246351DC004310218C4200000040000813
+:100FA000000000003C1180008E2401400E0003452B
+:100FB0008F92FFA88E50000C8E2201441602000270
+:100FC00024020001AE42000C0E0003508E240140AA
+:100FD0008E220144145000068FBF001C8FB20018EF
+:100FE0008FB100148FB000100A000F3927BD002008
+:100FF0008E42000C0A0004220000000094A200109F
+:101000003C0480008C8301443042FFFF14620009DD
+:101010000000000024020001A4A200108C82014004
+:10102000AC8202003C021000AC8202380A000429A3
+:101030008FBF001C94A200100A00042200000000D0
+:10104000240200201482000E3C11800094A20012A1
+:101050003C0380008C6301443042FFFF14620005B2
+:101060000000000024020001A4A200120A0003FCF8
+:101070008FBF001C94A200120A000422000000008E
+:101080008E2401400E0003458F92FFA89642001265
+:101090008E2301443050FFFF16030002240200019A
+:1010A000A64200120E0003508E2401408E220144FD
+:1010B000160200068FBF001C8FB200188FB10014FB
+:1010C0008FB000100A00038E27BD00209642001248
+:1010D0000A0004220000000094A200143C038000D7
+:1010E0008C6301443042FFFF146200088FBF001C74
+:1010F000240200018FB200188FB100148FB00010CD
+:10110000A4A200140A00142427BD002094A20014F5
+:101110000A0004220000000094A200163C03800094
+:101120008C6301443042FFFF146200082402000176
+:101130008FBF001C8FB200188FB100148FB0001049
+:10114000A4A200160A000B0027BD002094A20016DE
+:10115000144000068FBF001C3C0208008C42007047
+:10116000244200013C010800AC2200708FB200183C
+:101170008FB100148FB0001003E0000827BD0020DD
+:1011800027BDFFD8AFB200188F92FFA8AFB10014EF
+:10119000AFBF0020AFB3001CAFB000103C02800016
+:1011A000345101008C50010092420000922300094A
+:1011B000304400FF2402001F106200AB28620020B0
+:1011C00010400019240200382862000A1040000D67
+:1011D0002402000B286200081040002E8F82001CA1
+:1011E00004600103286200021440002A8F82001C60
+:1011F00024020006106200268FBF00200A00054C62
+:101200008FB3001C106200602862000B144000F9CC
+:101210008FBF00202402000E106200788F82001C15
+:101220000A00054C8FB3001C106200D128620039FF
+:101230001040000A2402008024020036106200E4FC
+:1012400028620037104000C224020035106200D826
+:101250008FBF00200A00054C8FB3001C1062002DC8
+:101260002862008110400006240200C824020039D0
+:10127000106200C88FBF00200A00054C8FB3001C0D
+:10128000106200A28FBF00200A00054C8FB3001C23
+:101290008F82001C8C42000C104000D68FBF0020B3
+:1012A0000E000D45000000003C0380003463010087
+:1012B0008C6200008F850018946700089466000C0B
+:1012C000ACA200008C6400048F82001C0006340075
+:1012D000ACA400049448001E8C62001800073C0077
+:1012E00000E83825ACA200088C62001C2404000130
+:1012F000ACA2000C9062000A00C23025ACA600101F
+:10130000ACA00014ACA00018ACA7001C0A00050B90
+:101310008FBF00208F82001C8C42000C104000B553
+:101320008FBF00200E000D45000000008F82001CC2
+:10133000962400089625000C9443001E0004220207
+:101340009626000E8F8200180004260000832025B8
+:1013500000052C003C03008000A6282500832025E2
+:10136000AC400000AC400004AC400008AC40000CB5
+:10137000AC450010AC400014AC400018AC44001C5C
+:101380000A00050A240400019622000C14400018EB
+:10139000000000009242000530420010144000148A
+:1013A000000000000E0003450200202192420005CB
+:1013B00002002021344200100E000350A24200051A
+:1013C0009242000024030020304200FF10430088B6
+:1013D000020020218FBF00208FB3001C8FB20018A5
+:1013E0008FB100148FB000100A00103627BD0028FE
+:1013F0000000000D0A00054B8FBF00208C42000C3E
+:101400001040007C8FBF00200E000D450000000042
+:101410008E2200048F8400189623000CAC820000FA
+:101420003C0280089445002C8F82001C00031C00A5
+:1014300030A5FFFF9446001E3C02400E00651825B3
+:1014400000C23025AC830004AC800008AC80000CE6
+:10145000AC800010AC800014AC800018AC86001C7E
+:101460000A00050A240400010E00034502002021A1
+:101470008F93FFAC020020210E000350A660000CE9
+:10148000020020210E000355240500018F82001C5C
+:101490008C42000C104000578FBF00200E000D45FD
+:1014A000000000009622000C8F8300180002140038
+:1014B000AC700000AC620004AC6000088E440038E0
+:1014C0008F82001CAC64000C8E46003C9445001ECC
+:1014D0003C02401FAC66001000A228258E6200046A
+:1014E00024040001AC620014AC600018AC65001C60
+:1014F0008FBF00208FB3001C8FB200188FB1001473
+:101500008FB000100A000D7927BD002824020020AA
+:10151000108200398FB3001C0E000F1F0000000066
+:10152000104000348FBF00203C0380008C6201F823
+:101530000440FFFE24020002AC7001C0A06201C49E
+:101540003C021000AC6201F80A00054B8FBF00207E
+:10155000020020218FBF00208FB3001C8FB2001823
+:101560008FB100148FB000100A000E6827BD00284C
+:101570009625000C020020218FBF00208FB3001C95
+:101580008FB200188FB100148FB000100A000E8DBA
+:1015900027BD0028020020218FB3001C8FB2001845
+:1015A0008FB100148FB000100A000EB827BD0028BC
+:1015B0009225000D020020218FB3001C8FB200186D
+:1015C0008FB100148FB000100A000F0927BD00284A
+:1015D000020020218FBF00208FB3001C8FB20018A3
+:1015E0008FB100148FB000100A000EE027BD002854
+:1015F0008FBF00208FB3001C8FB200188FB1001472
+:101600008FB0001003E0000827BD00283C038000D5
+:101610008C6202780440FFFE24020002AC640240A7
+:10162000A06202443C02100003E00008AC620278B1
+:10163000A380001003E00008A38000113C03800099
+:101640008C6202780440FFFE8F820014AC6202407C
+:1016500024020002A06202443C02100003E00008E1
+:10166000AC6202783C02600003E000088C42540443
+:101670009083003024020005008040213063003F49
+:101680000000482114620005000050219082004CA7
+:101690009483004E304900FF306AFFFFAD00000C1C
+:1016A000AD000010AD000024950200148D05001C53
+:1016B0008D0400183042FFFF004910230002110082
+:1016C000000237C3004038210086202300A2102BDF
+:1016D0000082202300A72823AD05001CAD040018BC
+:1016E000A5090014A5090020A50A001603E00008BA
+:1016F000A50A002203E000080000000027BDFFD873
+:10170000AFB200183C128008AFB40020AFB3001C89
+:10171000AFB10014AFBF0024AFB0001036510100CC
+:101720003C0260008C4254049222000C3C140800DD
+:10173000929400F7304300FF24020001106200324F
+:101740000080982124020002146200353650008087
+:101750000E0013FE000000009202004C2403FF80E4
+:101760003C0480003042007F000211C0244202404D
+:101770000262102100431824AC83009492450008B3
+:101780009204004C3042007F3C0380061485000721
+:10179000004380212402FFFFA22200112402FFFF48
+:1017A000A62200120A0005BE2402FFFF96020020B6
+:1017B000A222001196020022A62200128E0200240C
+:1017C0003C048008AE2200143485008090A2004CB6
+:1017D00034830100A06200108CA2003CAC620018AF
+:1017E0008C820068AC6200E48C820064AC6200E031
+:1017F0008C82006CAC6200E824020001A0A20068A8
+:101800000A0005DA3C0480080E00141700000000EE
+:1018100036420080A04000680A0005DA3C048008D7
+:10182000A2000068A20000690A0006153C028008B8
+:10183000348300808C62003834850100AC62006C17
+:1018400024020001A062006990A200C590830008F4
+:10185000305100FF3072007F12320019001111C0A8
+:1018600024420240026210212403FF800043182416
+:101870003C048000AC8300943042007F3C0380062F
+:10188000004380218E02000C1040000D0200202138
+:101890000E00056A0000000026220001305100FF02
+:1018A0009203003C023410260002102B0002102389
+:1018B0003063007F022288240A0005E4A203003C72
+:1018C0003C088008350401008C8200D03507008078
+:1018D000ACE2003C8C8200D0AD02000090E5004CF0
+:1018E000908600C590E3004C908400C52402FF80E0
+:1018F00000A228243063007F308400FF00A6282542
+:101900000064182A1060000230A500FF38A500808E
+:10191000A0E5004CA10500093C0280089043000EA0
+:10192000344400803C058000A043000A8C830018EA
+:101930003C027FFF3442FFFF00621824AC83001892
+:101940008CA201F80440FFFE00000000ACB301C00F
+:101950008FBF00248FB400208FB3001C8FB20018FB
+:101960008FB100148FB0001024020002A0A201C4A5
+:1019700027BD00283C02100003E00008ACA201F8DB
+:1019800090A2000024420001A0A200003C03080035
+:101990008C6300F4304200FF1443000200803021C9
+:1019A000A0A0000090A200008F840014000211C0CB
+:1019B0002442024024830040008220212402FF8030
+:1019C000008220243063007F3C02800A00621821DC
+:1019D0003C028000AC44002403E00008ACC30000DB
+:1019E00094820006908300058C85000C8C86001084
+:1019F0008C8700188C88001C8C8400203C01080017
+:101A0000A42252C63C010800A02352C53C01080094
+:101A1000AC2552CC3C010800AC2652D03C01080059
+:101A2000AC2752D83C010800AC2852DC3C0108002D
+:101A3000AC2452E003E00008000000003C028008F3
+:101A4000344201008C4400343C03800034650400BF
+:101A5000AC6400388C420038AF850020AC62003C9A
+:101A60003C020005AC6200300000000000000000F5
+:101A700003E00008000000003C020006308400FF84
+:101A8000008220253C028000AC44003000000000B1
+:101A900000000000000000003C0380008C62000099
+:101AA000304200101040FFFD3462040003E00008E3
+:101AB000AF82002094C200003C080800950800CACC
+:101AC00030E7FFFF0080482101021021A4C200007E
+:101AD00094C200003042FFFF00E2102B544000018E
+:101AE000A4C7000094A200003C0308008C6300CC53
+:101AF00024420001A4A2000094A200003042FFFF93
+:101B0000144300073C0280080107102BA4A000002A
+:101B10005440000101003821A4C700003C028008A5
+:101B2000344601008CC3002894A200003C048000CD
+:101B30003042FFFE000210C000621021AC82003C67
+:101B40008C82003C00621823186000040000000032
+:101B50008CC200240A0006A6244200018CC2002484
+:101B6000AC8200383C020050344200103C0380003C
+:101B7000AC62003000000000000000000000000027
+:101B80008C620000304200201040FFFD0000000089
+:101B900094A200003C04800030420001000210C00A
+:101BA000004410218C430400AD2300008C42040447
+:101BB000AD2200043C02002003E00008AC820030AB
+:101BC00027BDFFE0AFB20018AFB10014AFB00010F6
+:101BD000AFBF001C94C2000000C080213C1208006E
+:101BE000965200C624420001A6020000960300009F
+:101BF00094E2000000E03021144300058FB1003072
+:101C00000E00067B024038210A0006DD00000000BD
+:101C10008C8300048C82000424420040046100078D
+:101C2000AC8200048C820004044000040000000028
+:101C30008C82000024420001AC8200009602000069
+:101C40003042FFFF50520001A60000009622000023
+:101C500024420001A62200003C0280083442010018
+:101C6000962300009442003C144300048FBF001CE4
+:101C700024020001A62200008FBF001C8FB20018B2
+:101C80008FB100148FB0001003E0000827BD0020C2
+:101C900027BDFFE03C028008AFBF001834420100BE
+:101CA0008C4800343C03800034690400AC68003880
+:101CB0008C42003830E700FFAF890020AC62003C66
+:101CC0003C020005AC620030000000000000000093
+:101CD0000000000000000000000000000000000004
+:101CE0008C82000C8C82000C9783000EAD220000C9
+:101CF0008C82001000604021AD2200048C8200180C
+:101D0000AD2200088C82001CAD22000C8CA20014B5
+:101D1000AD2200108C820020AD22001490820005BC
+:101D2000304200FF00021200AD2200188CA2001801
+:101D3000AD22001C8CA2000CAD2200208CA2001051
+:101D4000AD2200248CA2001CAD2200288CA2002011
+:101D5000AD22002C3402FFFFAD260030AD20003450
+:101D6000506200013408FFFFAD28003850E0001138
+:101D70003C0280083C0480083484010094820050B6
+:101D80003042FFFFAD22003C948300449485004420
+:101D9000240200013063FFFF000318C20064182111
+:101DA0009064005430A5000700A210040A00074800
+:101DB0000044102534420100AD20003C944300440F
+:101DC000944400443063FFFF000318C200621821EE
+:101DD0003084000790650054240200010082100442
+:101DE0000002102700451024A062005400000000EB
+:101DF00000000000000000003C02000634420040E9
+:101E00003C038000AC6200300000000000000000D5
+:101E1000000000008C620000304200101040FFFD06
+:101E20003C06800834C201503463040034C7014AC0
+:101E300034C4013434C5014034C60144AFA200109B
+:101E40000E0006BEAF8300208FBF001803E000081D
+:101E500027BD00208F83000C3C0608008CC600E8DC
+:101E60008F82001430633FFF000319800046102169
+:101E7000004310212403FF80004318243C06800007
+:101E8000ACC300283042007F3C03800C004330216B
+:101E900090C2000D30A500FF000038213442001030
+:101EA000A0C2000D8F89000C3C0280083442010062
+:101EB00094430044000913823048000324020001C7
+:101EC000A4C3000E1102000B2902000210400005FD
+:101ED000240200021100000C240300010A000790F4
+:101EE0000000182111020006000000000A000790FF
+:101EF000000018218CC2002C0A0007902443000126
+:101F00008CC20014244300018CC200180043102B23
+:101F10005040000A240700012402002714A20003F5
+:101F20003C0380080A00079D240700013463010078
+:101F30009462004C24420001A462004C0009138208
+:101F4000304300032C620002104000090080282169
+:101F5000146000040000000094C200340A0007ADC1
+:101F60003046FFFF8CC600380A0007AD00802821EC
+:101F7000000030213C040800248452C00A0006F20C
+:101F80000000000027BDFF90AFB60068AFB5006449
+:101F9000AFB40060AFB3005CAFB20058AFB1005453
+:101FA000AFBF006CAFB000508C9000000080B0213B
+:101FB0003C0208008C4200E8960400328F83001433
+:101FC0002414FF8030843FFF006218210004218028
+:101FD00000641821007410243C13800000A090219C
+:101FE00090A50000AE620028920400323C02800CF2
+:101FF0003063007F00628821308400C024020040EA
+:10200000148200320000A8218E3500388E2200187C
+:102010001440000224020001AE2200189202003C8B
+:10202000304200201440000E8F830014000511C0C0
+:102030002442024000621821306400783C02008093
+:102040000082202500741824AE630800AE640810D6
+:102050008E2200188E03000800431021AE220018C3
+:102060008E22002C8E230018244200010062182BBF
+:102070001060004300000000924200002442000172
+:10208000A24200003C0308008C6300F4304200FFD1
+:1020900050430001A2400000924200008F840014CF
+:1020A000000211C024420240248300403063007FBC
+:1020B000008220213C02800A009420240062182122
+:1020C000AE6400240A0008BEAEC3000092030032D2
+:1020D0002402FFC000431024304200FF14400005DA
+:1020E00024020001AE220018962200340A00082EB5
+:1020F0003055FFFF8E22001424420001AE2200184A
+:102100009202003000021600000216030441001C77
+:10211000000000009602003227A400100080282151
+:10212000A7A2001696020032000030212407000109
+:102130003042FFFFAF82000C0E0006F2AFA0001C81
+:10214000960200328F8300143C0408008C8400E85F
+:1021500030423FFF00021180006418210062182104
+:1021600000741024AE62002C3063007F3C02800EAD
+:10217000006218219062000D3042007FA062000DC5
+:102180009222000D30420010504000789242000030
+:102190003C028008344401009482004C8EC300004D
+:1021A0003C130800967300C62442FFFFA482004C33
+:1021B000946200329623000E3054FFFF3070FFFF10
+:1021C0003C0308008C6300D000701807A7A30038F8
+:1021D0009482003E3063FFFF3042FFFF146200072D
+:1021E000000000008C8200303C038000244200305C
+:1021F000AC62003C0A0008568C82002C948200409D
+:102200003042FFFF5462000927A400408C8200384E
+:102210003C03800024420030AC62003C8C820034DD
+:10222000AC6200380A0008653C03800027A500382E
+:1022300027A60048026038210E00067BA7A00048B0
+:102240008FA300403C02800024630030AC43003880
+:102250008FA30044AC43003C3C0380003C020005DB
+:10226000AC6200303C028008344401009482004299
+:10227000346304003042FFFF0202102B14400007B9
+:10228000AF8300209482004E94830042020210210A
+:10229000004310230A00087B3043FFFF9483004E65
+:1022A0009482004202631821005010230062182318
+:1022B0003063FFFF3C028008344401009482003CFC
+:1022C0003042FFFF14430003000000000A00088BA7
+:1022D000240300019482003C3042FFFF0062102B77
+:1022E000144000058F8200209482003C006210237D
+:1022F0003043FFFF8F820020AC550000AC4000044B
+:10230000AC540008AC43000C3C0200063442001000
+:102310003C038000AC6200300000000000000000C0
+:10232000000000008C620000304200101040FFFDF1
+:102330003C04800834840100001018C20064182195
+:102340009065005432020007240600010046100484
+:1023500000451025A0620054948300429622000E8E
+:1023600050430001A3860010924200002442000165
+:10237000A24200003C0308008C6300F4304200FFDE
+:1023800050430001A2400000924200008F840014DC
+:10239000000211C024420240248300400082202118
+:1023A0002402FF80008220243063007F3C02800AE8
+:1023B000006218213C028000AC440024AEC300003F
+:1023C0008FBF006C8FB600688FB500648FB400605B
+:1023D0008FB3005C8FB200588FB100548FB00050A3
+:1023E00003E0000827BD007027BDFFD8AFB3001C75
+:1023F000AFB20018AFB10014AFB00010AFBF0020F3
+:102400000080982100E0802130B1FFFF0E000D45D3
+:1024100030D200FF000000000000000000000000BB
+:102420008F8200188F83001CAC510000AC52000456
+:10243000AC530008AC40000CAC400010AC400014A1
+:10244000AC4000189463001E02038025AC50001CB1
+:102450000000000000000000000000002404000153
+:102460008FBF00208FB3001C8FB200188FB10014F3
+:102470008FB000100A000D7927BD002830A5FFFF9E
+:102480000A0008C830C600FF3C028008344301003F
+:102490009462000E3C080800950800C63046FFFF15
+:1024A00014C000043402FFFF946500DA0A00091525
+:1024B0008F84001410C20027000000009462004EB8
+:1024C0009464003C3045FFFF00A6102300A6182BA3
+:1024D0003087FFFF106000043044FFFF00C5102369
+:1024E00000E210233044FFFF0088102B1040000E44
+:1024F00000E810233C02800834440100240300015A
+:1025000034420080A44300162402FFFFA482000E80
+:10251000948500DA8F8400140000302130A5FFFF7D
+:102520000A0008ED3C0760200044102A1040000912
+:102530003C0280083443008094620016304200015F
+:10254000104000043C0280009442007E24420014AB
+:10255000A462001603E000080000000027BDFFE0B1
+:102560003C028008AFBF001CAFB00018344201002D
+:10257000944300429442004C104000193068FFFF21
+:102580009383001024020001146200298FBF001CF5
+:102590003C06800834D00100000810C20050102111
+:1025A000904200543103000734C70148304200FF15
+:1025B000006210073042000134C9014E34C4012CBE
+:1025C00034C5013E1040001634C601420E0006BE5E
+:1025D000AFA90010960200420A0009323048FFFFFE
+:1025E0003C028008344401009483004494820042F9
+:1025F0001043000F8FBF001C94820044A48200424D
+:1026000094820050A482004E8C820038AC8200304C
+:1026100094820040A482003E9482004AA482004832
+:102620008FBF001C8FB000180A0008F027BD0020E3
+:102630008FB0001803E0000827BD002027BDFFA0D1
+:10264000AFB1004C3C118000AFBF0058AFB3005495
+:10265000AFB20050AFB000483626018890C20003E8
+:102660003044007FA3A400108E32018090C200008D
+:102670003043007F240200031062003BAF9200143D
+:102680002862000410400006240200042402000214
+:10269000106200098FBF00580A000AFB8FB3005474
+:1026A0001062004D240200051062014E8FBF0058D9
+:1026B0000A000AFB8FB30054000411C0024210212B
+:1026C0002404FF802442024000441024264300409A
+:1026D000AE2200243063007F3C02800A0062182191
+:1026E0009062003CAFA3003C00441025A062003C77
+:1026F0008FA3003C9062003C304200401040016CCF
+:102700008FBF00583C108008A380001036100100D5
+:102710008E0200D08C63003427A4003C27A5001053
+:10272000004310210E0007AFAE0200D093A20010AC
+:102730003C038000A20200C58C6202780440FFFEC8
+:102740008F820014AC62024024020002A0620244A4
+:102750003C021000AC6202780E0009250000000067
+:102760000A000AFA8FBF00583C05800890C3000198
+:1027700090A2000B1443014E8FBF005834A4008078
+:102780008C8200189082004C90A200083C026000ED
+:102790008C4254048C8300183C027FFF3442FFFFBC
+:1027A000006218243C0208008C4200B4AC8300187C
+:1027B0003C038000244200013C010800AC2200B42C
+:1027C0008C6201F80440FFFE8F820014AC6201C0ED
+:1027D0000A000AC2240200023C10800890C30001D3
+:1027E0009202000B144301328FBF005827A4001837
+:1027F00036050110240600033C0260008C4254049C
+:102800000E000E080000000027A40028360501E095
+:102810000E000E08240600038FA2002836030100D4
+:10282000AE0200648FA2002CAE0200688FA20030BE
+:10283000AE02006C93A40018906300C52402FF80D0
+:102840000082102400431025304900FF3084007FAF
+:102850003122007F0082102A544000013929008073
+:10286000000411C0244202402403FF8002421021D0
+:1028700000431024AE220094264200403042007FE4
+:102880003C038006004340218FA3001C2402FFFF6D
+:10289000AFA800403C130800927300F710620033A9
+:1028A00093A2001995030014304400FF3063FFFF2A
+:1028B0000064182B10600010000000009504001444
+:1028C0008D07001C8D0600183084FFFF0044202374
+:1028D0000004210000E438210000102100E4202B36
+:1028E00000C2302100C43021AD07001CAD06001825
+:1028F0000A000A1B93A20019950400148D07001CFE
+:102900008D0600183084FFFF008220230004210080
+:10291000000010210080182100C2302300E4202B89
+:1029200000C4302300E33823AD07001CAD060018B7
+:1029300093A200198FA30040A462001497A2001A6A
+:10294000A46200168FA2001CAC6200108FA2001CB3
+:10295000AC62000C93A20019A462002097A2001A96
+:10296000A46200228FA2001CAC6200243C048008F8
+:10297000348300808C6200388FA2002001208821DF
+:10298000AC62003C8FA20020AC82000093A2001831
+:10299000A062004C93A20018A0820009A060006809
+:1029A00093A20018105100512407FF803229007FA4
+:1029B000000911C024420240024210213046007F2B
+:1029C0003C03800000471024AC6200943C02800667
+:1029D00000C2302190C2003CAFA600400000202180
+:1029E00000471025A0C2003C8FA8004095020002BD
+:1029F000950300148D07001C3042FFFF3063FFFF7A
+:102A00008D060018004310230002110000E2382157
+:102A100000E2102B00C4302100C23021AD07001CA1
+:102A2000AD06001895020002A5020014A5000016CC
+:102A30008D020008AD0200108D020008AD02000CEE
+:102A400095020002A5020020A50000228D020008C8
+:102A5000AD0200249102003C304200401040001AB8
+:102A6000262200013C108008A3A90038A380001092
+:102A7000361001008E0200D08D03003427A40040E0
+:102A800027A50038004310210E0007AFAE0200D08A
+:102A900093A200383C038000A20200C58C62027839
+:102AA0000440FFFE8F820014AC6202402402000248
+:102AB000A06202443C021000AC6202780E000925BC
+:102AC00000000000262200013043007F1473000440
+:102AD000004020212403FF800223102400432026ED
+:102AE00093A200180A000A37309100FF93A400183F
+:102AF0008FA3001C2402FFFF1062000A308900FF30
+:102B000024820001248300013042007F1453000519
+:102B1000306900FF2403FF80008310240043102647
+:102B2000304900FF3C0280089042000801208821C3
+:102B3000305000FF123000193222007F000211C015
+:102B400002421021244202402403FF800043182443
+:102B50003C048000AC8300943042007F3C0380063C
+:102B6000004310218C43000C004020211060000B1A
+:102B7000AFA200400E00056A0000000026230001FD
+:102B80002405FF803062007F1453000202252024B8
+:102B9000008518260A000A9B307100FF3C0480085B
+:102BA000348400808C8300183C027FFF3442FFFF96
+:102BB00000621824AC8300183C0380008C6201F88A
+:102BC0000440FFFE00000000AC7201C024020002BD
+:102BD000A06201C43C021000AC6201F80A000AFACB
+:102BE0008FBF00583C04800890C300019082000B06
+:102BF0001443002F8FBF00583490008092020008C9
+:102C00003042004010400020000000009202000806
+:102C100000021600000216030441000502402021B4
+:102C20000E000E8D240500930A000AFA8FBF00588B
+:102C30009202000924030018304200FF1443000DE3
+:102C400002402021240500390E000E25000030210D
+:102C50000E0003458F8400148F82FFA82403001206
+:102C6000A04300090E0003508F8400140A000AFAE2
+:102C70008FBF0058240500360E000E2500003021BD
+:102C80000A000AFA8FBF00580E00034502402021B7
+:102C9000920200058F840014344200200E0003507D
+:102CA000A20200050E0010368F8400148FBF00585A
+:102CB0008FB300548FB200508FB1004C8FB00048DA
+:102CC00003E0000827BD00603C0280083445010095
+:102CD0003C0280008C42014094A3000E0000302191
+:102CE00000402021AF8200143063FFFF3402FFFF59
+:102CF000106200063C0760202402FFFFA4A2000E21
+:102D000094A500DA0A0008ED30A5FFFF03E00008F3
+:102D10000000000027BDFFC83C0280003C06800880
+:102D2000AFB5002CAFB1001CAFBF0030AFB400286E
+:102D3000AFB30024AFB20020AFB00018345101008F
+:102D400034C501008C4301008E2200148CA400D4F1
+:102D50000000A821AF830014004410231840005243
+:102D6000A38000108E22001400005021ACA200D4D9
+:102D700090C3000890A200C53073007FA3A200108A
+:102D80008CB200D08CB400D4304200FF1053003B12
+:102D900093A200108F8300142407FF80000211C04B
+:102DA00000621021244202402463004000471024A6
+:102DB0003063007F3C0980003C08800A00681821CD
+:102DC000AD2200248C62003427A4001427A5001033
+:102DD000024280210290102304400028AFA3001477
+:102DE0009062003C00E21024304200FF14400019C1
+:102DF000020090219062003C34420040A062003CFE
+:102E00008F86001493A3001024C200403042007F3C
+:102E1000004828213C0208008C4200F42463000191
+:102E2000306400FF14820002A3A30010A3A00010CE
+:102E300093A20010AFA50014000211C0244202406A
+:102E400000C2102100471024AD2200240A000B31DB
+:102E500093A200100E0007AF000000003C028008A3
+:102E600034420100AC5000D093A30010240A0001AA
+:102E7000A04300C50A000B3193A2001024020001F8
+:102E8000154200093C0380008C6202780440FFFE7A
+:102E90008F820014AC62024024020002A06202444D
+:102EA0003C021000AC6202789222000B2403000264
+:102EB000304200FF14430072000000009622000818
+:102EC000304300FF24020082146200402402008488
+:102ED0003C028000344901008D22000C952300063D
+:102EE000000216023063FFFF3045003F2402002736
+:102EF00010A2000FAF83000C28A200281040000889
+:102F0000240200312402002110A20009240200251D
+:102F100010A20007938200110A000BA90000000014
+:102F200010A20007938200110A000BA90000000004
+:102F30000E000763012020210A000C290000000078
+:102F40003C0380008C6202780440FFFE8F820014F4
+:102F5000AC62024024020002A06202443C02100063
+:102F6000AC6202780A000C290000000095230006DC
+:102F7000912400058D25000C8D2600108D2700184A
+:102F80008D28001C8D290020244200013C010800EE
+:102F9000A42352C63C010800A02452C53C010800ED
+:102FA000AC2552CC3C010800AC2652D03C010800B4
+:102FB000AC2752D83C010800AC2852DC3C01080088
+:102FC000AC2952E00A000C29A38200111462000A05
+:102FD000240200813C02800834420100944500DA5A
+:102FE000922600058F84001430A5FFFF30C600FF35
+:102FF0000A000BEA3C0760211462005C000000003C
+:103000009222000A304300FF306200201040000787
+:10301000306200403C02800834420100944500DAEE
+:103020008F8400140A000BE82406004010400007BB
+:10303000000316003C02800834420100944500DA87
+:103040008F8400140A000BE82406004100021603D6
+:10305000044100463C02800834420100944500DAF5
+:103060008F8400142406004230A5FFFF3C0760193E
+:103070000E0008ED000000000A000C29000000000E
+:103080009222000B24040016304200FF1044000678
+:103090003C0680009222000B24030017304200FF00
+:1030A000144300320000000034C5010090A2000B60
+:1030B000304200FF1444000B000080218CA200204D
+:1030C0008CA400202403FF80004310240002114040
+:1030D0003084007F004410253C032000004310256D
+:1030E000ACC2083094A200080002140000021403CD
+:1030F000044200012410000194A200083042008024
+:103100005040001A0200A82194A20008304220007A
+:10311000504000160200A8218CA300183C021C2D70
+:10312000344219ED106200110200A8213C0208008F
+:103130008C4200D4104000053C02800824030004A7
+:1031400034420100A04300EC3C02800834420100FC
+:10315000944500DA8F8400142406000630A5FFFF92
+:103160000E0008ED3C0760210200A8210E00092591
+:10317000000000009222000A3042000810400004C3
+:1031800002A010210E00133A0000000002A010213E
+:103190008FBF00308FB5002C8FB400288FB3002470
+:1031A0008FB200208FB1001C8FB0001803E0000820
+:1031B00027BD00382402FF80008220243C029000BA
+:1031C00034420007008220253C028000AC440020ED
+:1031D0003C0380008C6200200440FFFE00000000E1
+:1031E00003E00008000000003C0380002402FF8090
+:1031F000008220243462000700822025AC64002075
+:103200008C6200200440FFFE0000000003E0000884
+:10321000000000003C028008240300053442010045
+:10322000A04300EC3C0280008C4201003C03800083
+:10323000AF8200148C6202780440FFFE8F8200147B
+:10324000AC62024024020002A06202443C02100070
+:10325000AC62027803E000080000000027BDFFE830
+:103260003C068000AFBF001034C7010094E20008A4
+:10327000304400FF38830082388200842C630001D0
+:103280002C420001006218251060002D24020083EA
+:1032900093820011504000368FBF00103C0208009E
+:1032A000904252CC8CC401003C06080094C652C621
+:1032B0003045003F38A3003238A2003F2C630001A4
+:1032C0002C42000100621825AF840014AF86000C68
+:1032D000A38000111460000700E0202124020020D8
+:1032E00014A20012000000003402FFFF14C2000FFD
+:1032F000000000002402002014A2000500E02821A4
+:103300008CE300142402FFFF5062000B8FBF0010FB
+:103310003C040800248452C0000030210E0006F254
+:10332000240700010A000C9C8FBF00100E000763E9
+:10333000000000008FBF00100A00092527BD0018FB
+:10334000148200062482FF808CC301043C026020AA
+:10335000AC4300140A000CD28FBF0010304200FFB3
+:103360002C42000210400004240200228FBF0010F3
+:103370000A000B1327BD0018148200048F82001C62
+:103380008FBF00100A000C5327BD00188C42000CA0
+:103390001040001E00E0282190E3000924020018DC
+:1033A00014620003240200160A000CBD2403000866
+:1033B0001462000724020017240300123C02800854
+:1033C00034420080A04300090A000CCA94A70008F8
+:1033D0005462000794A700088F82FFA82404FFFE10
+:1033E0009043000500641824A043000594A700083A
+:1033F00090A6001B8CA4000094A500068FBF0010AF
+:1034000000073C000A0008C827BD00188FBF001045
+:1034100003E0000827BD00188F85001C3C048000D5
+:1034200094A2002A8CA30034000230C02402FFF0D2
+:1034300000C2102400621821AC83003C8CA2003032
+:103440003C038000AC8200383C0200503442001043
+:10345000AC6200300000000000000000000000002E
+:103460008C620000304200201040FFFD30C2000896
+:10347000104000063C0280008C620408ACA20020D0
+:103480008C62040C0A000CF5ACA200248C430400EE
+:10349000ACA300208C420404ACA200243C03002016
+:1034A0003C028000AC4300303C0480008C82003041
+:1034B000004310241440FFFD8F86001C3C02004096
+:1034C000AC82003094C3002A94C2002894C4002C1B
+:1034D00094C5002E24630001004410213064FFFFD6
+:1034E000A4C2002814850002A4C3002AA4C0002A94
+:1034F00003E00008000000008F84001C27BDFFE8E7
+:103500003C05800424840010AFBF00100E000E089C
+:103510002406000A8F84001C948200129483002EDB
+:103520003042000F244200030043180424027FFFAE
+:103530000043102B10400002AC8300000000000D7F
+:103540000E000CD4000000008F83001C8FBF001001
+:1035500027BD0018946200149463001A3042000FD3
+:1035600000021500006218253C02800003E00008FC
+:10357000AC4300A08F83001C3C02800494440006EE
+:103580009462001A8C650000A464001600441023A5
+:103590003042FFFF0045102B03E0000838420001D5
+:1035A0008F84001C3C0780049486001A8C850000E0
+:1035B00094E20006A482001694E3000600C31023E0
+:1035C0003042FFFF0045102B384200011440FFF845
+:1035D000A483001603E00008000000008F84001C94
+:1035E0003C028004944200069483001A8C850000FB
+:1035F000A4820016006210233042FFFF0045102B0A
+:10360000384200015040000D8F85001C00603021C1
+:103610003C07800494E20006A482001694E30006AE
+:1036200000C310233042FFFF0045102B3842000139
+:103630001440FFF8A48300168F85001C3C03800013
+:10364000346204008CA40020AF820018AC640038FF
+:103650008CA20024AC62003C3C020005AC6200304D
+:1036600003E00008ACA000048F84001C3C030006AB
+:103670008C82000400021140004310253C038000AE
+:10368000AC620030000000000000000000000000FC
+:103690008C620000304200101040FFFD34620400D4
+:1036A000AC80000403E00008AF8200188F86001C85
+:1036B00027BDFFE0AFB10014AFB00010AFBF0018DE
+:1036C0008CC300048CC500248F820018309000FF4A
+:1036D00094C4001A246300012442002024840001C1
+:1036E00024A70020ACC30004AF820018A4C4001AB1
+:1036F000ACC7002404A100060000882104E20005F4
+:1037000094C2001A8CC2002024420001ACC20020E6
+:1037100094C2001A94C300282E040001004310260E
+:103720002C420001004410245040000594C2001AAD
+:1037300024020001ACC2000894C2001A94C30028FD
+:103740000010202B004310262C42000100441025BD
+:1037500014400007000000008CC200081440000460
+:10376000240200108CC300041462000F8F85001C1B
+:103770000E000D68241100018F82001C9443002864
+:103780009442001A14430003000000000E000CD401
+:1037900000000000160000048F85001C0E000D457F
+:1037A000000000008F85001C94A2001E94A4001C41
+:1037B000244200013043FFFF14640002A4A2001E53
+:1037C000A4A0001E1200000A3C02800494A200146F
+:1037D00094A3001A3042000F000215000062182561
+:1037E0003C028000AC4300A00A000DDFACA0000842
+:1037F0009442000694A3001A8CA40000A4A2001610
+:10380000006210233042FFFF0044102B38420001B9
+:103810001040000D02201021006030213C07800480
+:1038200094E20006A4A2001694E3000600C310234D
+:103830003042FFFF0044102B384200011440FFF8D3
+:10384000A4A30016022010218FBF00188FB100140E
+:103850008FB0001003E0000827BD002003E000083F
+:10386000000000008F8200243C030006000211408B
+:10387000004310253C038000AC62003000000000D3
+:1038800000000000000000008C62000030420010C8
+:103890001040FFFD34620400AF82002003E0000806
+:1038A000AF80002403E000080000102103E00008BE
+:1038B000000000003084FFFF30A5FFFF000018214A
+:1038C000108000070000000030820001104000025C
+:1038D00000042042006518210A000DFE0005284062
+:1038E00003E000080060102110C0000624C6FFFF9E
+:1038F0008CA2000024A50004AC8200000A000E087F
+:103900002484000403E000080000000010A0000868
+:1039100024A3FFFFAC8600000000000000000000B0
+:103920002402FFFF2463FFFF1462FFFA24840004D3
+:1039300003E00008000000003C02800834420080E0
+:1039400024030001AC43000CA4430010A443001264
+:10395000A443001403E00008A44300168F82001C57
+:1039600027BDFFD8AFB3001CAFB20018AFB1001431
+:10397000AFB00010AFBF00208C47000C2482008045
+:103980002409FF803C08800E3043007F00808021A6
+:103990003C0A8000004920240068182130B100FF53
+:1039A00030D200FF10E0002900009821260201001B
+:1039B000AD44002C004928243042007F00482021DB
+:1039C0009062000024030050304200FF14430004C2
+:1039D00000000000AD45002C948200DA3053FFFF58
+:1039E0000E000D45000000008F82001C8F83001820
+:1039F00000112C009442001E0012240034840001A7
+:103A000000A228253C02400000A22825AC7000003E
+:103A10008FBF0020AC6000048FB20018AC730008A8
+:103A20008FB10014AC60000C8FB3001CAC640010AC
+:103A30008FB00010AC60001424040001AC600018CA
+:103A400027BD00280A000D79AC65001C8FBF00203F
+:103A50008FB3001C8FB200188FB100148FB000100C
+:103A600003E0000827BD00283C06800034C20100A6
+:103A70009043000F240200101062000E2865001110
+:103A800010A0000724020012240200082405003AB6
+:103A9000106200060000302103E000080000000072
+:103AA000240500351462FFFC000030210A000E25B9
+:103AB000000000008CC200748F83FFA824420FA076
+:103AC00003E00008AC62000C27BDFFE8AFBF0010A8
+:103AD0000E000355240500013C0480088FBF001030
+:103AE0002402000134830080A462001227BD001864
+:103AF0002402000103E00008A080001A27BDFFE0B7
+:103B0000AFB20018AFB10014AFB00010AFBF001CCF
+:103B100030B2FFFF0E000345008088213C02800880
+:103B2000345000809202000924030004304200FF58
+:103B30001443000C3C028008124000082402000AD2
+:103B40000E000E1C00000000920200052403FFFE80
+:103B500000431024A202000524020012A202000960
+:103B60003C02800834420080022020210E000350D5
+:103B7000A040002716400003022020210E000E80E6
+:103B80000000000002202021324600FF8FBF001CF1
+:103B90008FB200188FB100148FB0001024050038C8
+:103BA0000A000E2527BD002027BDFFE0AFBF001C87
+:103BB000AFB20018AFB10014AFB000100E00034553
+:103BC000008080210E000E1C000000003C028008D6
+:103BD0003445008090A2000924120018305100FFE3
+:103BE000123200030200202124020012A0A20009C8
+:103BF00090A200052403FFFE004310240E00035092
+:103C0000A0A2000502002021240500201632000792
+:103C1000000030218FBF001C8FB200188FB100143C
+:103C20008FB000100A00035527BD00208FBF001C75
+:103C30008FB200188FB100148FB000102405003926
+:103C40000A000E2527BD002027BDFFE83C028000AA
+:103C5000AFB00010AFBF0014344201009442000C1A
+:103C6000240500360080802114400012304600FFF9
+:103C70000E000345000000003C0280083442008032
+:103C800024030012A0430009904300053463001090
+:103C90000E000E1CA04300050E0003500200202160
+:103CA000020020210E000355240500200A000EFD0D
+:103CB000000000000E000E25000000000E0003456D
+:103CC000020020213C0280089043001B2405FF9F36
+:103CD00002002021006518248FBF00148FB000104F
+:103CE000A043001B0A00035027BD001827BDFFE0BA
+:103CF000AFBF0018AFB10014AFB0001030B100FF7B
+:103D00000E000345008080213C028008240300123D
+:103D1000344200800E000E1CA04300090E00035028
+:103D20000200202102002021022030218FBF001834
+:103D30008FB100148FB00010240500350A000E2545
+:103D400027BD00203C0480089083000E9082000A6A
+:103D50001443000B000028218F82FFA82403005089
+:103D60002405000190420000304200FF144300048B
+:103D7000000000009082000E24420001A082000E8C
+:103D800003E0000800A010213C0380008C6201F8D1
+:103D90000440FFFE24020002AC6401C0A06201C422
+:103DA0003C02100003E00008AC6201F827BDFFE010
+:103DB000AFB200183C128008AFB10014AFBF001CB6
+:103DC000AFB0001036510080922200092403000A8F
+:103DD000304200FF1443003E000000008E43000408
+:103DE0008E220038506200808FBF001C922200009B
+:103DF00024030050304200FF144300253C028000A1
+:103E00008C4201408E4300043642010002202821EA
+:103E1000AC43001C9622005C8E2300383042FFFF2A
+:103E20000002104000621821AE23001C8E430004E3
+:103E30008E2400389622005C006418233042FFFF75
+:103E400000031843000210400043102A10400006EF
+:103E5000000000008E4200048E230038004310232F
+:103E60000A000F6B000220439622005C3042FFFFE5
+:103E7000000220403C0280083443010034420080AC
+:103E8000ACA4002CA040002424020001A062000C7D
+:103E90000E000F1F00000000104000538FBF001CD9
+:103EA0003C0280008C4401403C0380008C6201F89D
+:103EB0000440FFFE24020002AC6401C0A06201C401
+:103EC0003C021000AC6201F80A000FC88FBF001C52
+:103ED0009222000924030010304200FF1443000422
+:103EE0003C0280008C4401400A000FAF00002821F2
+:103EF0009222000924030016304200FF14430006FA
+:103F000024020014A22200093C0280008C440140DB
+:103F10000A000FC28FBF001C8E2200388E23003C87
+:103F200000431023044100308FBF001C9222002761
+:103F300024420001A2220027922200272C420004E2
+:103F4000144000163C108000922200092403000453
+:103F5000304200FF144300093C0280008C440140C1
+:103F60008FBF001C8FB200188FB100148FB00010EB
+:103F7000240500930A000E8D27BD00208C440140CB
+:103F8000240500938FBF001C8FB200188FB100145E
+:103F90008FB000100A000F0927BD00208E040140D9
+:103FA0000E000345000000008E4200042442FFFF83
+:103FB000AE4200048E22003C2442FFFFAE22003CB1
+:103FC0000E0003508E0401408E0401408FBF001C80
+:103FD0008FB200188FB100148FB0001024050004B8
+:103FE0000A00035527BD00208FB200188FB10014BE
+:103FF0008FB0001003E0000827BD00203C068000C1
+:104000008CC201883C038008346500809063000EF8
+:1040100000021402304400FF306300FF1464000EFD
+:104020003C02800890A20026304200FF10440009A4
+:104030008F82FFA8A0A40026240300509042000015
+:10404000304200FF14430006000000000A00058D06
+:104050008CC401803C02800834420080A0440026C9
+:1040600003E000080000000027BDFFE030E700FF8C
+:10407000AFB20018AFBF001CAFB10014AFB000105A
+:104080000080902114E0000630C600FF0000000010
+:104090000000000D000000000A0010212400010EA5
+:1040A0003C0380089062000E304200FF144600235B
+:1040B0003462008090420026304200FF1446001F08
+:1040C000000000009062000F304200FF1446001B09
+:1040D000000000009062000A304200FF1446000316
+:1040E0008F90FFA80000000D8F90FFA88F82FFAC7B
+:1040F0003C118000AE05003CAC450000A066000A03
+:104100000E0003458E240100A20000240E0003507F
+:104110008E2401003C0380008C6201F80440FFFE05
+:1041200024020002AC7201C0A06201C43C02100073
+:10413000AC6201F80A0010228FBF001C00000000D2
+:104140000000000D00000000240001378FBF001C9C
+:104150008FB200188FB100148FB0001003E0000878
+:1041600027BD00208F83FFA83C0280008C44010003
+:10417000344201008C65003C9046001B0A000FE8A9
+:10418000240700013C0280089043000E9042000A80
+:1041900000431026304200FF03E000080002102B0D
+:1041A00027BDFFE03C028008AFB10014AFB00010A3
+:1041B000AFBF001834500080920200052403003085
+:1041C0003042003014430085008088218F82001C1B
+:1041D0008C42000C104000828FBF00180E000D456D
+:1041E000000000008F860018ACD100009202000889
+:1041F00092030009304200FF00021200306300FF0A
+:1042000000431025ACC200049202004D00021600CB
+:104210000002160304410005000000003C030800F2
+:104220008C6300480A0010603C108008920200086D
+:104230003042004014400003000018219202002781
+:10424000304300FF3C108008361100809222004D60
+:1042500000031E00304200FF000214000062182517
+:10426000ACC300088E2400308F82001CACC4000C4C
+:104270008E2500349443001E3C02C00BACC50010D8
+:10428000006218258E22003800002021ACC20014E4
+:104290008E22003CACC200180E000D79ACC3001C8D
+:1042A0008E0200048F8400183C058000AC82000060
+:1042B0008E220020AC8200048E22001CAC820008FA
+:1042C0008E2200588CA3007400431021AC82000C95
+:1042D0008E22002CAC8200108E2200408E230044DF
+:1042E0000002140000431025AC8200149222004DFD
+:1042F00024030080304200FF14430004000000004B
+:10430000AC8000180A0010A48F82001C8E23000CC1
+:10431000240200011062000E2402FFFF9222000816
+:10432000304200401440000A2402FFFF8E23000C9C
+:104330008CA20074006218233C0208000062102462
+:1043400014400002000028210060282100051043CD
+:10435000AC8200188F82001C000020219443001EB4
+:104360003C02C00C006218258F8200180E000D79E7
+:10437000AC43001C3C038008346201008C42000006
+:104380008F850018346300808FBF0018ACA2000036
+:10439000ACA000048C6400488F82001C8FB1001414
+:1043A000ACA40008ACA0000CACA000109063000509
+:1043B0009446001E3C02400D00031E0000C2302542
+:1043C000ACA300148FB00010ACA0001824040001AE
+:1043D000ACA6001C0A000D7927BD00208FBF001875
+:1043E0008FB100148FB0001003E0000827BD00203B
+:1043F0003C0280009443007C3C028008344601006B
+:10440000308400FF3065FFFF2402000524A34650DE
+:10441000A0C4000C5482000C3065FFFF90C2000D58
+:104420002C4200071040000724A30A0090C3000D8F
+:10443000240200140062100400A210210A0010E0FF
+:104440003045FFFF3065FFFF3C02800834420080AA
+:1044500003E00008A44500143C0380083468008091
+:10446000AD050038346701008CE2001C308400FF89
+:1044700000A210231840000330C600FF24A2FFFC56
+:10448000ACE2001C30820001504000083C03800870
+:104490008D02003C00A210230441001224040005F8
+:1044A0008C62000410A2000F3C0380088C620004A0
+:1044B00014A2001E000000003C0208008C4200D83C
+:1044C00030420020104000093C0280083462008025
+:1044D000906300089042004C144300043C028008A2
+:1044E000240400040A0010CA0000000034430080C5
+:1044F00034420100A040000C24020001A462001418
+:1045000010C0000A3C0280008C4401003C03800083
+:104510008C6201F80440FFFE24020002AC6401C07A
+:10452000A06201C43C021000AC6201F803E0000884
+:104530000000000027BDFFE800A61823AFBF001051
+:1045400018600080308800FF3C02800834470080FB
+:10455000A0E0002434440100A0E000278C82001C6D
+:1045600000A2102304400056000000008CE2003C32
+:1045700094E3005C8CE4002C004530233063FFFFA3
+:1045800000C318210083202B1080000400E01821B4
+:104590008CE2002C0A00113900A2102194E2005C88
+:1045A0003042FFFF00C2102100A21021AC62001CAB
+:1045B0003C028008344400809482005C8C83001CA0
+:1045C0003042FFFF0002104000A210210043102BD8
+:1045D00010400004000000008C82001C0A00114CF6
+:1045E0003C0680089482005C3042FFFF00021040CD
+:1045F00000A210213C06800834C3010034C70080AB
+:10460000AC82001CA060000CACE500388C62001C81
+:1046100000A210231840000224A2FFFCAC62001C80
+:1046200031020001104000083C0380088CE2003C8D
+:1046300000A2102304410012240400058CC20004CF
+:1046400010A200108FBF00108C62000414A2004F53
+:104650008FBF00103C0208008C4200D8304200207E
+:104660001040000A3C028008346200809063000819
+:104670009042004C144300053C02800824040004CE
+:104680008FBF00100A0010CA27BD001834430080F5
+:1046900034420100A040000C24020001A462001476
+:1046A0003C0280008C4401003C0380008C6201F8D5
+:1046B0000440FFFE240200020A00119900000000DD
+:1046C0008CE2001C004610230043102B54400001D4
+:1046D000ACE5001C94E2005C3042FFFF0062102B4E
+:1046E000144000072402000294E2005C8CE3001CEA
+:1046F0003042FFFF00621821ACE3001C24020002DC
+:10470000ACE500380E000F1FA082000C1040001F07
+:104710008FBF00103C0280008C4401003C038000ED
+:104720008C6201F80440FFFE24020002AC6401C068
+:10473000A06201C43C021000AC6201F80A0011B191
+:104740008FBF001031020010104000108FBF00100A
+:104750003C028008344500808CA3001C94A2005CBD
+:10476000006618233042FFFF006218213C023FFF21
+:104770003444FFFF0083102B5440000100801821B7
+:1047800000C31021ACA2001C8FBF001003E0000882
+:1047900027BD001827BDFFE800C0402100A6302338
+:1047A000AFBF001018C00026308A00FF3C0280080E
+:1047B000344900808D24001C8D23002C0088202388
+:1047C0000064182B1060000F344701008CE20020B9
+:1047D00000461021ACE200208CE200200044102BA7
+:1047E0001440000B3C023FFF8CE2002000441023E9
+:1047F000ACE200209522005C3042FFFF0A0011D19C
+:1048000000822021ACE00020008620213C023FFFF6
+:104810003443FFFF0064102B54400001006020214E
+:104820003C0280083442008000851821AC43001C03
+:10483000A0400024A04000270A0012233C03800867
+:1048400031420010104000433C0380083C068008C1
+:1048500034C400808C82003C004810235840003E45
+:10486000346600809082002424420001A08200244B
+:10487000908200243C0308008C630024304200FF37
+:104880000043102B144000688FBF001034C2010099
+:104890008C42001C00A2102318400063000000009E
+:1048A0008CC300049482005C006818233042FFFF30
+:1048B00000031843000210400043102A1040000576
+:1048C000000000008CC20004004810230A001206F9
+:1048D000000210439482005C3042FFFF000210404F
+:1048E0003C068008AC82002C34C5008094A2005C99
+:1048F0008CA4002C94A3005C3042FFFF0002104007
+:10490000008220213063FFFF008320210104102159
+:10491000ACA2001C8CC2000434C60100ACC2001C56
+:10492000240200020E000F1FA0C2000C1040003E27
+:104930008FBF00103C0280008C4401003C038000CB
+:104940008C6201F80440FFFE240200020A001253A8
+:104950000000000034660080ACC5003834640100FB
+:104960008C82001C00A210231840000224A2FFFC2D
+:10497000AC82001C314200015040000A3C03800818
+:104980008CC2003C00A21023044300142404000540
+:104990008C62000414A200033C0380080A00124544
+:1049A000240400058C62000414A2001F8FBF0010B5
+:1049B0003C0208008C4200D8304200201040000A1F
+:1049C0003C02800834620080906300089042004CF2
+:1049D000144300053C028008240400048FBF00102B
+:1049E0000A0010CA27BD0018344300803442010079
+:1049F000A040000C24020001A46200143C028000CC
+:104A00008C4401003C0380008C6201F80440FFFEEE
+:104A100024020002AC6401C0A06201C43C02100088
+:104A2000AC6201F88FBF001003E0000827BD00183A
+:104A300027BDFFE83C0A8008AFBF00103549008061
+:104A40008D22003C00C04021308400FF004610232E
+:104A50001840009D30E700FF3547010024020001A7
+:104A600000A63023A0E0000CA0E0000DA522001459
+:104A700018C00024308200108D23001C8D22002CD1
+:104A8000006818230043102B1040000F00000000A6
+:104A90008CE2002000461021ACE200208CE20020D5
+:104AA0000043102B1440000B3C023FFF8CE200201F
+:104AB00000431023ACE200209522005C3042FFFF4F
+:104AC0000A00128200621821ACE000200066182162
+:104AD0003C023FFF3446FFFF00C3102B544000014F
+:104AE00000C018213C028008344200800065182173
+:104AF000AC43001CA0400024A04000270A0012D0B4
+:104B00003C038008104000403C0380088D22003C9C
+:104B1000004810235840003D346700809122002453
+:104B200024420001A1220024912200243C03080019
+:104B30008C630024304200FF0043102B1440009A85
+:104B40008FBF00108CE2001C00A2102318400096BA
+:104B5000000000008D4300049522005C00681823CB
+:104B60003042FFFF00031843000210400043102AA8
+:104B700010400005012020218D4200040048102330
+:104B80000A0012B3000210439522005C3042FFFF7E
+:104B9000000210403C068008AC82002C34C5008026
+:104BA00094A2005C8CA4002C94A3005C3042FFFF14
+:104BB00000021040008220213063FFFF0083182193
+:104BC00001031021ACA2001C8CC2000434C60100F9
+:104BD000ACC2001C240200020E000F1FA0C2000C79
+:104BE000104000718FBF00103C0280008C44010017
+:104BF0003C0380008C6201F80440FFFE24020002A6
+:104C00000A0012FA0000000034670080ACE50038AA
+:104C1000346601008CC2001C00A210231840000260
+:104C200024A2FFFCACC2001C3082000150400008EE
+:104C30003C0380088CE2003C00A210230443005196
+:104C4000240400058C62000410A2003E3C0380088E
+:104C50008C62000454A200548FBF00103C02080074
+:104C60008C4200D830420020104000063C028008F0
+:104C700034620080906300089042004C1043004072
+:104C80003C0280083443008034420100A040000C04
+:104C900024020001A46200143C0280008C44010044
+:104CA0003C0380008C6201F80440FFFE24020002F5
+:104CB000AC6401C0A06201C43C021000AC6201F807
+:104CC0000A0013388FBF001024020005A12000271E
+:104CD00014E2000A3C038008354301009062000D95
+:104CE0002C420006504000053C0380089062000DF5
+:104CF00024420001A062000D3C038008346700805C
+:104D0000ACE50038346601008CC2001C00A2102300
+:104D10001840000224A2FFFCACC2001C308200013B
+:104D20005040000A3C0380088CE2003C00A21023A3
+:104D300004410014240400058C62000414A2000342
+:104D40003C0380080A00132F240400058C62000431
+:104D500014A200158FBF00103C0208008C4200D83E
+:104D6000304200201040000A3C028008346200807B
+:104D7000906300089042004C144300053C028008F8
+:104D8000240400048FBF00100A0010CA27BD0018B9
+:104D90003443008034420100A040000C2402000192
+:104DA000A46200148FBF001003E0000827BD0018A4
+:104DB0003C0B800827BDFFE83C028000AFBF00101D
+:104DC00034420100356A00809044000A35690100D0
+:104DD0008C4500148D4800389123000C308400FF6E
+:104DE000010510231C4000B3306700FF2CE20006D1
+:104DF000504000B18FBF00102402000100E23004D7
+:104E000030C200035440000800A8302330C2000C18
+:104E1000144000A130C20030144000A38FBF001026
+:104E20000A0013FC0000000018C0002430820010AB
+:104E30008D43001C8D42002C006818230043102B6A
+:104E40001040000F000000008D22002000461021BD
+:104E5000AD2200208D2200200043102B1440000BB7
+:104E60003C023FFF8D22002000431023AD22002092
+:104E70009542005C3042FFFF0A0013700062182167
+:104E8000AD200020006618213C023FFF3446FFFFA2
+:104E900000C3102B5440000100C018213C028008C0
+:104EA0003442008000651821AC43001CA04000245F
+:104EB000A04000270A0013BE3C03800810400040B9
+:104EC0003C0380088D42003C004810231840003D00
+:104ED000346700809142002424420001A142002452
+:104EE000914200243C0308008C630024304200FF00
+:104EF0000043102B144000708FBF00108D22001C47
+:104F000000A210231840006C000000008D63000414
+:104F10009542005C006818233042FFFF00031843ED
+:104F2000000210400043102A1040000501402021DB
+:104F30008D620004004810230A0013A100021043F0
+:104F40009542005C3042FFFF000210403C068008A2
+:104F5000AC82002C34C5008094A2005C8CA4002C90
+:104F600094A3005C3042FFFF000210400082202129
+:104F70003063FFFF0083182101031021ACA2001C45
+:104F80008CC2000434C60100ACC2001C2402000222
+:104F90000E000F1FA0C2000C104000478FBF001072
+:104FA0003C0280008C4401003C0380008C6201F8CC
+:104FB0000440FFFE240200020A0013EE000000007D
+:104FC00034670080ACE50038346601008CC2001CF8
+:104FD00000A210231840000224A2FFFCACC2001C57
+:104FE000308200015040000A3C0380088CE2003C03
+:104FF00000A2102304430014240400058C62000462
+:1050000014A200033C0380080A0013E024040005F6
+:105010008C62000414A200288FBF00103C0208001C
+:105020008C4200D8304200201040000A3C02800828
+:1050300034620080906300089042004C14430005E5
+:105040003C028008240400048FBF00100A0010CA2C
+:1050500027BD00183443008034420100A040000CFA
+:1050600024020001A46200143C0280008C44010070
+:105070003C0380008C6201F80440FFFE2402000221
+:10508000AC6401C0A06201C43C021000AC6201F833
+:105090000A0013FC8FBF00108FBF001001003021E9
+:1050A0000A00111B27BD0018010030210A00125A06
+:1050B00027BD00188FBF001003E0000827BD0018AF
+:1050C0003C0380083464010024020003A082000C29
+:1050D0008C62000403E00008AC82001C3C058008E0
+:1050E00034A300809062002734A501002406004309
+:1050F00024420001A0620027906300273C020800C0
+:105100008C420048306300FF146200043C076021B9
+:1051100094A500DA0A0008ED30A5FFFF03E00008BF
+:105120000000000027BDFFE8AFBF00103C02800078
+:105130000E0014058C4401803C02800834430100B9
+:10514000A060000C8C4200048FBF001027BD001827
+:1051500003E00008AC62001C27BDFFE03C028008B1
+:10516000AFBF0018AFB10014AFB0001034450080DD
+:10517000344601003C0880008D09014090C3000CBA
+:105180008CA4003C8CA200381482003B306700FFE6
+:105190009502007C90A30027146000093045FFFFB2
+:1051A0002402000554E200083C04800890C2000D6F
+:1051B00024420001A0C2000D0A0014403C048008F3
+:1051C000A0C0000D3C048008348201009042000C15
+:1051D00024030005304200FF1443000A24A205DC2A
+:1051E00034830080906200272C4200075040000565
+:1051F00024A20A0090630027240200140062100415
+:1052000000A210213C108008361000803045FFFFBE
+:10521000012020210E001405A60500149602005C52
+:105220008E0300383C1180003042FFFF0002104026
+:1052300000621821AE03001C0E0003458E240140BD
+:105240009202002534420040A20200250E000350C5
+:105250008E2401408E2401403C0380008C6201F8C2
+:105260000440FFFE24020002AC6401C0A06201C43D
+:105270003C021000AC6201F88FBF00188FB100141F
+:0C5280008FB0001003E0000827BD0020E4
+:04528C008008010095
+:10529000800800808008000000000C8000003200C0
+:1052A0008008024008000EDC08000F3408000F7868
+:1052B00008001010080010508008010080080080CD
+:0452C0008008000062
+:0C52C4000A0000220000000000000000B2
+:1052D0000000000D6370352E302E306A390000005A
+:1052E00005000004000000000000000000000000B5
+:1052F000000000000000000038003C00000000003A
+:10530000000000000000000000000000000000207D
+:10531000000000000000000000000000000000008D
+:10532000000000000000000000000000000000007D
+:105330000000000000000000210038000000000113
+:105340000000002B00000000000000000000000032
+:1053500010000003000000000000000D0000000D20
+:105360003C020800244254243C0308002463564CA9
+:10537000AC4000000043202B1480FFFD24420004B9
+:105380003C1D080037BD9FFC03A0F0213C10080025
+:10539000261000883C1C0800279C54240E0002881C
+:1053A000000000000000000D00A018210080102166
+:1053B000008028213C0460003C07600024060008AF
+:1053C00010600006348420788C420000ACE2200893
+:1053D0008C63000003E00008ACE3200C0A000E2AF6
+:1053E00000000000240300403C02600003E00008CD
+:1053F000AC4320003C0760008F8600008CE52074E1
+:105400000086102100A2182B14600007000028213C
+:105410008F8AFD9824050001A14400138F890000A4
+:1054200001244021AF88000003E0000800A0102103
+:105430008F84FD988F8500009086001330C300FF95
+:1054400000A31023AF82000003E00008A080001337
+:105450008F84FD9827BDFFE8AFB00010AFBF0014E8
+:10546000908900119087001124020028312800FF44
+:105470003906002830E300FF2485002C2CD00001E1
+:10548000106200162484001C0E0000390000000089
+:105490008F8FFD983C0560002402020495EE003ECB
+:1054A00095ED003C000E5C0031ACFFFF016C502517
+:1054B000ACAA20105200000124020004ACA220007B
+:1054C0000000000000000000000000008FBF00147A
+:1054D0008FB0001003E0000827BD00180A0000711B
+:1054E000000028218F85FD9827BDFFD8AFBF002081
+:1054F000AFB3001CAFB20018AFB10014AFB00010D2
+:105500000080982190A4001124B0001C24B1002C2C
+:10551000308300FF386200280E00005B2C5200012F
+:105520000E00006300000000020020211240000273
+:1055300002202821000028210E0000390000000070
+:105540008F8DFD983C0880003C05600095AC003EC6
+:1055500095AB003C02683025000C4C00316AFFFF1F
+:10556000012A3825ACA7201024020202ACA6201480
+:1055700052400001240200028FBF00208FB3001CA4
+:105580008FB200188FB100148FB0001027BD002813
+:1055900003E00008ACA2200027BDFFE0AFB2001876
+:1055A000AFB10014AFB00010AFBF001C3C116000E1
+:1055B0008E2320748F82000030D0FFFF30F2FFFF77
+:1055C0001062000C2406008F0E000039000000005D
+:1055D0003C06801F0010440034C5FF00011238252E
+:1055E00024040002AE27201000003021AE25201434
+:1055F000AE2420008FBF001C8FB200188FB10014A2
+:105600008FB0001000C0102103E0000827BD00206B
+:1056100027BDFFE0AFB0001030D0FFFFAFBF0018D4
+:10562000AFB100140E00003930F1FFFF001024006C
+:10563000009180253C036000AC7020108FBF0018E3
+:105640008FB100148FB0001024020004AC6220005F
+:1056500027BD002003E000080000102127BDFFE85F
+:105660003C0B6018AFBF00108D6F50002418FF7FF7
+:10567000340C807101F8702435CD380C240A0031C7
+:105680003C098000AD6D50003C08800AAD6C53BCF5
+:10569000AD2A00080E00049BAF88002C0E000459B0
+:1056A000000000000E000048000000003C07600001
+:1056B0008CE508082406FFF03C03570900A62024C7
+:1056C0003462F0001082005024190001AF800034D1
+:1056D0000E000BBC000000003C0660168CC40000ED
+:1056E0003C0760148CE500A03C03FFFF00831024FE
+:1056F0003C1F535300051FC2105F003D34C57C00A2
+:1057000094A201F2A780004C10400003A780005C27
+:10571000384B1E1EA78B004C94A201F810400004C9
+:105720008F8D0034384C1E1EA78C005C8F8D00348A
+:1057300011A000049784005C240E0020A78E004C6A
+:105740009784005C2C8F008151E0000124040080CC
+:105750009785004C2CB80401530000012405040077
+:105760003C0260008C4304382419103C307FFFFF5A
+:1057700013F900033087FFFF50E0000F24060050AC
+:10578000A380005E9388005E51000010A784005C37
+:10579000A780005C9785005C8FBF0010A780004C3D
+:1057A000A7800054A78000723C010800AC2500804F
+:1057B00003E0000827BD0018A386005E9388005E02
+:1057C0005500FFF4A780005CA784005CA785004C0F
+:1057D0008FBF00109785005CA7800054A7800072DF
+:1057E0003C010800AC25008003E0000827BD00183C
+:1057F00000035080014648218D2800043C066000CB
+:105800000A00010F010628210A000103AF990034A4
+:105810003083FFFF8F88002C8F87002800032140F2
+:105820003C0580003C020050008248253C06600098
+:105830003C0A010034AC04008CCD08E001AA5824D5
+:1058400011600005000000008CCF08E024E7000193
+:1058500001EA7025ACCE08E08D19001001805821B6
+:10586000ACB900388D180014ACB8003CACA90030BD
+:105870000000000000000000000000000000000028
+:105880000000000000000000000000000000000018
+:105890003C0380008C640000308200201040FFFD3B
+:1058A0003C0F60008DED08E03C0E010001AE1824B5
+:1058B0001460FFE100000000AF87002803E000084B
+:1058C000AF8B00388F85002C240BFFF03C06800046
+:1058D00094A7001A8CA9002430ECFFFF000C38C0FC
+:1058E00000EB5024012A4021ACC8003C8CA40024C9
+:1058F0008CC3003C008310231840003300000000DC
+:105900008CAD002025A200013C0F0050ACC2003835
+:1059100035EE00103C068000ACCE003000000000E8
+:105920000000000000000000000000000000000077
+:105930000000000000000000000000003C048000A7
+:105940008C990000333800201300FFFD30E200087E
+:10595000104000173C0980008C880408ACA8001097
+:105960008C83040CACA300143C1900203C1880006C
+:10597000AF19003094AE001894AF001C01CF302155
+:10598000A4A6001894AD001A25A70001A4A7001A28
+:1059900094AB001A94AC001E118B000300000000B1
+:1059A00003E000080000000003E00008A4A0001AC3
+:1059B0008D2A0400ACAA00108D240404ACA40014A9
+:1059C0000A0001AA3C1900208CA200200A000192C2
+:1059D0003C0F00500A0001800000000027BDFFE8D6
+:1059E000AFBF00100E0001C4000000008F89002C22
+:1059F0008FBF00103C038000A520000A9528000AF4
+:105A00009527000427BD00183105FFFF30E6000F81
+:105A10000006150000A2202503E00008AC64008009
+:105A20003C0508008CA500208F83000427BDFFE8FB
+:105A3000AFB00010AFBF001410A300100000802111
+:105A4000240400010204300400A6202400C3102412
+:105A50005044000626100001001018802787FD9C86
+:105A60001480000A00671821261000012E09000288
+:105A70005520FFF38F830004AF8500048FBF00140F
+:105A80008FB0001003E0000827BD00188C680000EC
+:105A90003C058000ACA800240E0001C626100001C1
+:105AA0003C0508008CA500200A0001EB2E0900022D
+:105AB00024050001008518043C0408008C840020A3
+:105AC00027BDFFC8AFBF003400831024AFBE003035
+:105AD000AFB7002CAFB60028AFB50024AFB400209C
+:105AE000AFB3001CAFB20018AFB1001410400051AA
+:105AF000AFB000108F84002C948700069488000AB1
+:105B000000E8302330D5FFFF12A0004B8FBF0034D8
+:105B1000948B0018948C000A016C50233142FFFFD3
+:105B200002A2482B1520000202A0202100402021C3
+:105B30002C8F000515E0000200809821241300043A
+:105B40000E000153026020218F87002C02609021FB
+:105B5000AF80003094F4000A026080211260004E91
+:105B60003291FFFF3C1670003C1440003C1E2000A8
+:105B70003C1760008F9900388F38000003161824F6
+:105B80001074004F0283F82B17E00036000000006D
+:105B9000107E00478F86003014C0003A24030001B5
+:105BA00002031023022320213050FFFF1600FFF1D3
+:105BB0003091FFFF8F87002C3C1100203C108000AB
+:105BC000AE11003094EB000A3C178000024B5021CC
+:105BD000A4EA000A94E9000A94E800043123FFFFD4
+:105BE0003106000F00062D000065F025AEFE008096
+:105BF00094F3000A94F6001812D3003600122140E4
+:105C00008CFF00148CF4001003E468210000C02114
+:105C100001A4782B0298702101CF6021ACED001413
+:105C2000ACEC001002B2382330F5FFFF16A0FFB82D
+:105C30008F84002C8FBF00348FBE00308FB7002CB4
+:105C40008FB600288FB500248FB400208FB3001CBE
+:105C50008FB200188FB100148FB0001003E000085D
+:105C600027BD00381477FFCC8F8600300E000D8BD7
+:105C700002002021004018218F86003010C0FFC98B
+:105C800002031023027070238F87002C01C3682148
+:105C90000A00027631B2FFFF8F86003014C0FFC9C0
+:105CA0003C1100203C1080000A000240AE11003080
+:105CB0000E0003C4020020210A00026D00401821DA
+:105CC000020020210E0007DB022028210A00026DBD
+:105CD000004018210E000180000000000A00025957
+:105CE00002B2382327BDFFD8AFB40020AFB3001CE9
+:105CF000AFB20018AFB10014AFB00010AFBF0024B6
+:105D00000E0000E6241300013C0280083C03200042
+:105D10003C010800AC200070345400803472000351
+:105D20003C1080002411FF800E0001D7000000000D
+:105D30008E06000038C5000130A400011480FFFA6F
+:105D4000000000008E07010024030C0010E300098E
+:105D50003C0580008E0901002D2830805500001080
+:105D60003C0480008E0B01002D6A31811140000C33
+:105D70003C0480008CAC0100118300040000202151
+:105D80008CAE010025CDFF8131A400FF8E0F0100F4
+:105D90000E0001FBAE0F00240A0002C13C0480008B
+:105DA0008C9F010024180020AC9F002092990000D5
+:105DB000332300FF1078001F2402005010620022DD
+:105DC000000000003C0480008C830100146000038C
+:105DD00000000000566000143C0440008C8201006A
+:105DE0008C990100000098210051F824001F79408F
+:105DF0003338007F01F8702501D26825AC8D08305A
+:105E00008C8C01008C890100258B010001715024CC
+:105E1000000A39403128007F00E8302500D22825CB
+:105E2000AC8508303C044000AE0401380A000299F9
+:105E3000000000008C8501000E00078D2404008006
+:105E40000A0002C13C0480008C8401000E0013EAA9
+:105E5000000000000A0002C13C04800000A4102BD6
+:105E600024030001104000090000302100052840F3
+:105E700000A4102B04A00003000318405440FFFCB2
+:105E8000000528405060000A0004182B0085382BBC
+:105E900054E000040003184200C33025008520238D
+:105EA000000318421460FFF9000528420004182B73
+:105EB00003E0000800C310213084FFFF30C600FF5C
+:105EC0003C0780008CE201B80440FFFE00064C0055
+:105ED000012430253C08200000C820253C03100088
+:105EE000ACE00180ACE50184ACE4018803E000088B
+:105EF000ACE301B83C0660008CC5201C2402FFF016
+:105F000030830200308601001060000E00A22824B9
+:105F100034A500013087300010E0000530830C000C
+:105F200034A500043C04600003E00008AC85201C9C
+:105F30001060FFFD3C04600034A5000803E0000889
+:105F4000AC85201C54C0FFF334A500020A000315E1
+:105F50003087300027BDFFE8AFB00010AFBF00149E
+:105F60003C076000240600021080001100A0802180
+:105F70008F8300380E00030C8C6400188F82003869
+:105F800000002021240600018C45000C0E0002FDBB
+:105F9000000000001600000224020003000010218F
+:105FA0008FBF00148FB0001003E0000827BD001859
+:105FB0008CE8201C2409FFF001092824ACE5201CF2
+:105FC0008F8700380A0003328CE5000C3C02600E1B
+:105FD0000080402134460100240900180000000020
+:105FE00000000000000000003C0A00503C0380005C
+:105FF00035470200AC68003834640400AC65003CEE
+:10600000AC6700308C6C0000318B00201160FFFD0C
+:106010002407FFFF2403007F8C8D00002463FFFF13
+:1060200024840004ACCD00001467FFFB24C60004E8
+:1060300000000000000000000000000024A4020096
+:106040000085282B3C0300203C0E80002529FFFF03
+:1060500001054021ADC300301520FFE0008028215C
+:1060600003E00008000000008F82003827BDFFD841
+:10607000AFB3001CAFBF0020AFB20018AFB1001427
+:10608000AFB0001094460002008098218C52001896
+:106090002CC300818C4800048C4700088C51000CF4
+:1060A0008C490010106000078C4A00142CC40004B6
+:1060B0001480001330EB000730C5000310A000105F
+:1060C000000000002410008B020020210220282163
+:1060D0000E0002FD240600031660000224020003E5
+:1060E000000010218FBF00208FB3001C8FB200185A
+:1060F0008FB100148FB0001003E0000827BD002806
+:106100001560FFF12410008B3C0C80003C03002044
+:10611000241F0001AD830030AF9F0030000000005D
+:1061200000000000000000002419FFF024D8000F38
+:10613000031978243C1000D0AD88003801F0702598
+:1061400024CD00033C08600EAD87003C358504007B
+:10615000AD8E0030000D38823504003C3C038000D9
+:106160008C6B0000316200201040FFFD0000000039
+:1061700010E0000824E3FFFF2407FFFF8CA80000C5
+:106180002463FFFF24A50004AC8800001467FFFB14
+:10619000248400043C04600EAC860038000000003B
+:1061A00000000000000000003C0700203C068000CA
+:1061B0000120202101402821ACC700300E000342FD
+:1061C000000080210E00030C024020210A000382FF
+:1061D0000200202127BDFFE0AFB200183092FFFF80
+:1061E000AFB10014AFBF001CAFB000101640000DDF
+:1061F000000088210A0003F1022010212405000379
+:10620000508500278CE5000C0000000D262C0001B5
+:106210003191FFFF24EB00200232502B1140001976
+:10622000AF8B00388F820030144000168F87003803
+:106230003C0670003C0320008CE5000000A62024F2
+:10624000148300108F840040000544023C09800044
+:1062500000A980241480FFE9310600FF2CCA000B3E
+:106260001140FFEB262C0001000668803C0E080060
+:1062700025CE51C801AE60218D8B00000160000861
+:1062800000000000022010218FBF001C8FB20018F8
+:106290008FB100148FB0001003E0000827BD00206C
+:1062A0000E0002FD240400841600FFD88F870038FA
+:1062B0000A0003D2AF800040020028210E00032410
+:1062C000240400018F8700380A0003D2AF82004007
+:1062D000020028210E000324000020210A000401EE
+:1062E0008F8700380E000369020020218F87003855
+:1062F0000A0003D2AF82004030AFFFFF000F19C089
+:106300003C0480008C9001B80600FFFE3C1920047C
+:106310003C181000AC830180AC800184AC990188EA
+:10632000AC9801B80A0003D3262C000190E20002C9
+:1063300090FF00030000202100023A0000FF282502
+:10634000240600080E0002FD000000001600FFDD1C
+:10635000240200038F870038000010210A0003D2B6
+:10636000AF82004090E50002000020210A000420D6
+:106370002406000994E5000490E9000390E300027C
+:10638000000534000009420000C8202500832825AC
+:106390002406000A0A0004200000202190E50002E3
+:1063A000000020210A0004202406000B000449C23A
+:1063B0003127003F000443423C0280000008204097
+:1063C000240316802CE60020AC43002C24EAFFE0D6
+:1063D0002482000114C0000330A900FF00801021B6
+:1063E000314700FF000260803C0D8000240A00015C
+:1063F000018D20213C0B000E00EA2804008B302187
+:1064000011200005000538278CCE000001C5382575
+:1064100003E00008ACC700008CD800000307782414
+:1064200003E00008ACCF000027BDFFE0AFB10014CF
+:10643000AFB00010AFBF00183C0760008CE4080844
+:106440003402F0003C1160003083F000240501C0EC
+:106450003C04800E00003021106200062410000170
+:106460008CEA08083149F0003928E0000008382B90
+:10647000000780403C0D0200AE2D0814240C16804D
+:106480003C0B80008E2744000E000E34AD6C002CB7
+:10649000120000043C0216912405000112050010B0
+:1064A0003C023D6C345800E0AE3844083C11080012
+:1064B0008E31007C8FBF00183C06600000118540C3
+:1064C000360F16808FB100148FB000103C0E020002
+:1064D00027BD0020ACCF442003E00008ACCE08105C
+:1064E0003C0218DA345800E0AE3844083C11080089
+:1064F0008E31007C8FBF00183C0660000011854083
+:10650000360F16808FB100148FB000103C0E0200C1
+:1065100027BD0020ACCF442003E00008ACCE08101B
+:106520000A00043A240500010A00043A0000282168
+:1065300024020400A7820010A78000080000202188
+:106540003C06080024C654B02405FFFF248900013E
+:10655000000440803124FFFF010618212C87002011
+:1065600014E0FFFAAC65000024040400A7840012C4
+:10657000A780000A000020213C06080024C65530F0
+:106580002405FFFF248D00010004608031A4FFFF7B
+:10659000018658212C8A00201540FFFAAD650000C5
+:1065A000A7800014A780000CA780000E0000202107
+:1065B0003C06080024C655B02405FFFF24990001BD
+:1065C0000004C0803324FFFF030678212C8E0004D2
+:1065D00015C0FFFAADE500003C0560008CA73D004A
+:1065E0002403E08F00E310243446014003E0000858
+:1065F000ACA63D002487007F000731C224C5FFFF01
+:10660000000518C2246400013082FFFF000238C078
+:10661000A784001C3C010800AC270030AF800018A4
+:1066200000002821000020210000302124890001E1
+:1066300000A728213124FFFF2CA817011100000317
+:106640002C8300801460FFF924C6000100C02821BB
+:10665000AF86001810C0001DA786001624CAFFFFD1
+:10666000000A11423C080800250855B01040000AF5
+:1066700000002021004030212407FFFF248E00016C
+:106680000004688031C4FFFF01A860210086582BF8
+:106690001560FFFAAD87000030A2001F50400008CF
+:1066A00000043080240300010043C804000410806B
+:1066B000004878212738FFFF03E00008ADF800000C
+:1066C00000C820212405FFFFAC85000003E000087E
+:1066D0000000000030A5FFFF30C6FFFF30A8001FFC
+:1066E0000080602130E700FF0005294200005021B2
+:1066F00010C0001D24090001240B00012518000111
+:10670000010B2004330800FF01267826390E0020F3
+:106710002DED00012DC2000101A218251060000D11
+:10672000014450250005C880032C40210100182198
+:1067300010E0000F000A20278D040000008A1825B1
+:10674000AD03000024AD00010000402100005021F5
+:1067500031A5FFFF252E000131C9FFFF00C9102B15
+:106760001040FFE72518000103E0000800000000CA
+:106770008D0A0000014440240A000520AC68000096
+:1067800027BDFFE830A5FFFF30C6FFFFAFB0001008
+:10679000AFBF001430E7FFFF000050213410FFFFAF
+:1067A0000000602124AF001F00C048212418000110
+:1067B0002419002005E0001601E010210002F94331
+:1067C000019F682A0009702B01AE402411000017B8
+:1067D000000C18800064102110E000058C4B0000B4
+:1067E00000F84004000838230167582400003821CD
+:1067F0001540004100004021556000163169FFFF3F
+:10680000258B0001316CFFFF05E1FFEC01E0102159
+:1068100024A2003E0002F943019F682A0009702B60
+:1068200001AE40241500FFEB000C18801546000552
+:106830003402FFFF020028210E0005040000382169
+:10684000020010218FBF00148FB0001003E0000879
+:1068500027BD00181520000301601821000B1C0241
+:1068600024080010306A00FF15400005306E000F4C
+:10687000250D000800031A0231A800FF306E000F3A
+:1068800015C00005307F0003251000040003190225
+:10689000320800FF307F000317E00005386900016F
+:1068A0002502000200031882304800FF3869000109
+:1068B0003123000110600004310300FF250A0001AC
+:1068C000314800FF310300FF000C694001A3402163
+:1068D000240A000110CAFFD53110FFFF246E000109
+:1068E00031C800FF1119FFC638C900012D1F002053
+:1068F00053E0001C258B0001240D00010A000597C0
+:10690000240E002051460017258B000125090001A7
+:10691000312800FF2D09002051200012258B000195
+:1069200025430001010D5004014B102425090001ED
+:106930001440FFF4306AFFFF3127FFFF10EE000C18
+:106940002582FFFF304CFFFF000050213410FFFF75
+:10695000312800FF2D0900205520FFF225430001BA
+:10696000258B0001014648260A000551316CFFFFC6
+:1069700000003821000050210A0005A33410FFFF59
+:1069800027BDFFD8AFB0001030F0FFFFAFB100144B
+:10699000001039423211FFE000071080AFB3001C35
+:1069A00000B1282330D3FFFFAFB2001830A5FFFF9E
+:1069B000008090210260302100442021AFBF0020E0
+:1069C0000E00052F3207001F022288213403FFFF2B
+:1069D00002402021020028210260302100003821DD
+:1069E000104300093231FFFF022010218FBF002029
+:1069F0008FB3001C8FB200188FB100148FB000103D
+:106A000003E0000827BD00280E00052F000000004D
+:106A100000408821022010218FBF00208FB3001C6E
+:106A20008FB200188FB100148FB0001003E000087F
+:106A300027BD0028000424003C036000AC603D0832
+:106A400010A00002348210063482101603E0000801
+:106A5000AC623D0427BDFFE0AFB00010309000FFF6
+:106A60002E020006AFBF001810400008AFB100149E
+:106A7000001030803C030800246351F400C3282137
+:106A80008CA400000080000800000000000020210D
+:106A90008FBF00188FB100148FB00010008010213C
+:106AA00003E0000827BD0020979100161620005132
+:106AB000000020213C020800904200330A00060A30
+:106AC00000000000978D001215A000310000202169
+:106AD0000A00060A240200089787001014E0001A32
+:106AE0000000182100602021240200011080FFE92D
+:106AF0008FBF0018000429C20045302100A6582B82
+:106B00001160FFE43C0880003C072000000569C0DC
+:106B100001A76025AD0C00203C0380082402001F63
+:106B20002442FFFFAC6000000441FFFD2463000429
+:106B300024A5000100A6702B15C0FFF5000569C053
+:106B40000A0005F48FBF0018978700083C0408006E
+:106B5000248454B0240504000E0005AF240600016F
+:106B6000978B001024440001308AFFFF2569FFFF46
+:106B70002D4804000040282115000040A78900107E
+:106B800024AC3800000C19C00A000608A7800008D1
+:106B90009787000A3C04080024845530240504002B
+:106BA0000E0005AF2406000197990012244400014D
+:106BB0003098FFFF272FFFFF2F0E04000040882191
+:106BC00015C0002CA78F0012A780000A3A0200030C
+:106BD000262401003084FFFF0E0005DC2C45000157
+:106BE0000011F8C027F00100001021C00A00060AB9
+:106BF000240200089785001A9787000E3C040800BD
+:106C0000248455B00E0005AF2406000197870016B6
+:106C10008F8900182445000130A8FFFF24E3FFFFFF
+:106C20000109302B0040802114C00018A7830016F2
+:106C3000A780000E9785001C0E000E1E020020216A
+:106C4000244A05003144FFFF0E0005DC2405000145
+:106C50003C05080094A500320E000E1E0200202103
+:106C6000244521003C020800904200330A00060A35
+:106C7000000521C00A000642A784000A24AC38009F
+:106C8000000C19C00A000608A78400080A00065C68
+:106C9000A785000E308400FF27BDFFE82C82000688
+:106CA000AFBF0014AFB000101040001500A0382195
+:106CB000000440803C0308002463520C0103282197
+:106CC0008CA40000008000080000000024CC007F9D
+:106CD000000751C2000C59C23170FFFF2547C400A4
+:106CE00030E5FFFF27840008020030210E00050474
+:106CF000240700019786001402062021A7840014AF
+:106D00008FBF00148FB0001003E0000827BD0018EB
+:106D10003C0508008CA50030000779C20E0002E691
+:106D200025E4DF003045FFFF3C040800248455B013
+:106D3000240600010E00050424070001978E0016AA
+:106D40008FBF00148FB0001025CD000127BD0018A3
+:106D500003E00008A78D00160007C9C22738FF000E
+:106D6000001878C231F0FFFF3C040800248455303D
+:106D700002002821240600010E000504240700015A
+:106D8000978D0012260E0100000E840025AC000134
+:106D90003C0B6000A78C0012AD603D083604000675
+:106DA000000030213C0760008CE23D04305F0006AB
+:106DB00017E0FFFD24C9000100061B00312600FF7B
+:106DC000006440252CC50004ACE83D0414A0FFF687
+:106DD0008FBF00148FB0001003E0000827BD00181B
+:106DE000000751C22549C8002406000124070001FC
+:106DF0003C040800248454B00E0005043125FFFF34
+:106E0000978700108FBF00148FB0001024E6000198
+:106E100027BD001803E00008A78600103084FFFF9C
+:106E200030A5FFFF3C0680008CC201B80440FFFE85
+:106E30003C084080008838253C031000ACC001802D
+:106E4000ACC50184ACC7018803E00008ACC301B83D
+:106E50003084FFFF3C0680008CC201B80440FFFE76
+:106E60003C0840388CA70000008828253C0310000F
+:106E7000ACC70180ACC5018803E00008ACC301B811
+:106E80008F8300588F8600501066000B00804021D1
+:106E90003C07080024E755C0000328C000A71021C4
+:106EA0008C44000024630001108800053063000F4B
+:106EB0005466FFFA000328C003E000080000102118
+:106EC0003C07080024E755C400A7302103E0000870
+:106ED0008CC200003C039000346200010082202537
+:106EE0003C038000AC6400208C65002004A0FFFE01
+:106EF0000000000003E00008000000003C028000E9
+:106F0000344300010083202503E00008AC44002046
+:106F100027BDFFE0AFB100143091FFFFAFB000100C
+:106F2000AFBF00181220001200A080218CA5000025
+:106F300014A00011240400023C0680008CC201B899
+:106F40000440FFFE3C074000022720258FBF0018A9
+:106F50008FB100148FB000103C03100027BD00203B
+:106F6000ACC50180ACC4018803E00008ACC301B823
+:106F70000A00071D8CA500000E00067424060200FE
+:106F8000000028210A00071DAE0000003087FFFF27
+:106F90003C0680008CC201B80440FFFE3C0A40065B
+:106FA0008CA9000000EA4025ACC901808CA4000433
+:106FB0003C031000ACC40184ACC8018803E00008A5
+:106FC000ACC301B88F83FD9427BDFFE8AFBF0014A9
+:106FD000AFB00010906700080080102100802821C9
+:106FE00030E600400000202110C000088C50000056
+:106FF0000E00008802002021020020218FBF001413
+:107000008FB000100A00049727BD00180E00073249
+:10701000000000000E000088020020210200202154
+:107020008FBF00148FB000100A00049727BD00180E
+:1070300027BDFFE0AFB000108F90FD94AFBF001CE4
+:10704000AFB20018AFB10014920600010080882191
+:107050000E00070430D2000492040005001129C27A
+:10706000A605000034830040A20300050E00070EB1
+:10707000022020210E000499022020212402000178
+:10708000AE02000C02202821A602001024040002F7
+:10709000A602001224060200A60200140E000674C6
+:1070A000A60200161640000F8FBF001C978C0054DC
+:1070B0003C0B08008D6B00782588FFFF3109FFFF2E
+:1070C000256A0001012A382B10E00006A788005429
+:1070D0003C0F6006240E001635ED0010ADAE0050DA
+:1070E0008FBF001C8FB200188FB100148FB000103A
+:1070F00003E0000827BD002027BDFFE0AFB100146A
+:10710000AFBF0018AFB000101080000400A08821AD
+:107110002402008010820007000000000000000D23
+:107120008FBF00188FB100148FB0001003E000086B
+:1071300027BD00200E00070400A020218F86FD94AB
+:107140000220202190C500050E00070E30B000FF80
+:107150002403003E1603FFF1000000003C05800000
+:107160008CA401780480FFFE240800073C0710006F
+:10717000ACB1014002202021A0A801448FBF00181B
+:107180008FB100148FB00010ACA701780A00075B24
+:1071900027BD002027BDFFE0AFB00010AFBF001833
+:1071A000AFB100143C1080008E11002000000000E0
+:1071B0000E000499AE040020AE1100208FBF00180D
+:1071C0008FB100148FB0001003E0000827BD00202D
+:1071D0003084FFFF3C0680008CC201B80440FFFEF3
+:1071E0003C084035008838253C031000ACC50180C0
+:1071F000ACC00184ACC7018803E00008ACC301B88F
+:107200003084FFFF3C0680008CC201B80440FFFEC2
+:107210003C084036008838253C031000ACC501808E
+:10722000ACC00184ACC7018803E00008ACC301B85E
+:1072300027BDFFD0AFB500243095FFFFAFB60028C3
+:10724000AFB40020AFBF002CAFB3001CAFB200182A
+:10725000AFB10014AFB0001030B6FFFF12A000278E
+:107260000000A0218F9200388E4300003C06800071
+:107270002402004000033E0200032C0230E4007FA1
+:10728000006698241482001D30A500FF8F830048FB
+:107290002C68000A510000108F86003000035880CF
+:1072A0003C0C0800258C5228016C50218D490000AF
+:1072B000012000080000000002D4702131C5FFFF4A
+:1072C0000E0006D624040084166000028F92003857
+:1072D000AF8000488F860030264F002026890001AD
+:1072E00001E090213134FFFF14C00004AF8F00385B
+:1072F0000295282B14A0FFDC000000000280102162
+:107300008FBF002C8FB600288FB500248FB40020CB
+:107310008FB3001C8FB200188FB100148FB0001013
+:1073200003E0000827BD00302407003414A70146FD
+:10733000000000009247000E8F98FD988F90FD94FA
+:10734000240F1600A30700199244000D3C0880008A
+:107350003C07800CA3040018965F00123C096000F3
+:107360003C117FFFA61F005C965900103622FFFFDC
+:10737000240400053325FFFFAE0500548E46001C93
+:10738000AD0F00288CEE00008D2D444801C6182654
+:1073900001A33021AE0600388E0C003824CA00014B
+:1073A0003C0D7F00AE0C003C8E0B003CAF0B00048C
+:1073B000AE0A00208E130020AE13001CA300001B99
+:1073C000AE02002CA30400128E5F001424130050A0
+:1073D000AE1F00348E190034AF1900148E4500180A
+:1073E000AE050048924F000CA20F004E9209000813
+:1073F000352E0020A20E00088E030018006D6024B8
+:10740000358B4000AE0B0018920A0000315200FF8D
+:10741000125302A62413FF803C0408002484564023
+:107420000E00074000000000240C000424080001A6
+:107430003C0508008CA556403C048000A20C0025A9
+:10744000A20800058C9001780600FFFE8F9200389C
+:10745000240D00023C031000AC850140A08D0144C6
+:10746000AC8301780A000804AF8000482CAD0037D7
+:1074700011A0FF998F860030000580803C11080024
+:1074800026315250021178218DEE000001C0000813
+:10749000000000002410000414B0008E3C0780009F
+:1074A0003C0B08008D6B56408F86FD94ACEB0020A2
+:1074B0008E4300088F8FFD98240E0050ACC300301F
+:1074C0008E4A0008ACCA00508E42000CACC2003498
+:1074D0008E440010ACC400388E5F0010ACDF005446
+:1074E0008E590014ACD9003C8E580018ADF8000439
+:1074F0008E51001CACD1002090C5000030A900FFC7
+:10750000112E0276000000008CC500348CD10030B2
+:1075100000B1302304C000F32404008C126000F09A
+:10752000240200030A000804AF820048240F00056B
+:1075300014AF00683C0B80003C0308008C6356408D
+:107540008F86FD94AD6300208E4A00048F99FD98CC
+:1075500024072000ACCA001C924200082412000834
+:10756000A32200198F840038909F0009A33F0018C0
+:107570008F85003890B8000A330400FF1092001085
+:10758000288C0009158000BC24080002240E00206D
+:10759000108E000B34078000288900211520000878
+:1075A0002407400024110040109100053C07000111
+:1075B000240F0080108F00023C07000224074000C7
+:1075C0008CDF00183C04FF0003E4C8240327C02517
+:1075D000ACD8001890B2000BA0D200278F830038DF
+:1075E0009465000C10A0022A000000009467000CB3
+:1075F0003C198000240BFFBFA4C7005C9062000E02
+:1076000024070004A0C200088F840038909F000F58
+:10761000A0DF00098F8C00388D9200108F38007425
+:1076200002582823ACC500588D8F0014ACCF002C15
+:10763000959100183229FFFFACC90040958E001AC1
+:1076400031D0FFFFACD000448D8D001CACCD004884
+:1076500095880002A4C800789183000EA0C300089A
+:1076600090CA0008014B1024126001D4A0C2000887
+:107670008F9200380A000804AF87004824060006ED
+:1076800014A600143C0D80003C1008008E105640DB
+:107690008F8CFD90ADB000208E4800188F86FD9431
+:1076A0008F8AFD98AD8800008CC300382404000543
+:1076B000AD8300048CCB003C12600081AD4B000018
+:1076C0000A000804AF840048240E000710AE004BE7
+:1076D000240400063C05080024A556400E000713AC
+:1076E000240400818F9200380013102B0A00080434
+:1076F000AF8200482419002314B9FFF63C0B800028
+:107700003C0C08008D8C56408F8AFD98AD6C002093
+:107710008F91FD948E4600042544002026450014D8
+:10772000AE260028240600030E000E2A2550003045
+:107730008F87003802002021240600030E000E2A45
+:1077400024E500083C040800248456400E0007404D
+:107750000000000092220000241F0050304400FF6F
+:10776000549FFFE18F9200380E000E1500000000BC
+:107770000A0009098F9200382403003314A3003251
+:107780003C0280003C1108008E3156408F8EFD98DF
+:10779000AC5100208E440008240900288F88FD94F5
+:1077A000ADC400308E5F000C24060009ADDF00344C
+:1077B0008E590010ADD900388E580014ADD8002075
+:1077C0008E450018ADC500248E4F001CADCF00289B
+:1077D000A1C900118E4D000412600031AD0D0028CA
+:1077E0008F9200380A000804AF860048240900225E
+:1077F00014A9FFB800000000240400073C0F080093
+:107800008DEF56403C118000AE2F00205660FEB137
+:10781000AF8400483C040800248456400E00074012
+:10782000241300508F98FD9493120000324500FFFE
+:1078300010B30169000000008F9200380000202181
+:107840000A000804AF8400483C05080024A55640FF
+:107850000E0006E3240400810A0009098F92003813
+:1078600002D498213265FFFF0E0006D6240400845E
+:107870000A0008048F9200381088FF512407040082
+:107880002887000310E001A324100004240D000148
+:10789000548DFF4B240740000A0008BF2407010055
+:1078A0003C05080024A556400E000732240400823F
+:1078B0008F920038000030210A000804AF8600488B
+:1078C0003C040800248456408CC200380E00074057
+:1078D0008CC3003C8F9200380A00095F0000202111
+:1078E000240400823C05080024A556400E000732FF
+:1078F000000000008F920038000010210A000804E8
+:10790000AF8200488E5000048F91FD943C0A8000A5
+:10791000AD500020922200050200282130460002CE
+:1079200014C001802404008A8F92FD98020028214F
+:107930002404008D924B001B3163002014600179F8
+:1079400000000000922D0009240C001231A800FF55
+:10795000110C0174240400810E0007040200202190
+:107960009245001B240E00040200202134A900428D
+:10797000A249001B0E00070EA22E00253C04800029
+:107980008C9101780620FFFE24180002AC90014083
+:10799000A09801448F9200383C0F1000AC8F017802
+:1079A0000A00090A0013102B8E5000048F91FD94D9
+:1079B0003C1F8000AFF00020923900050200282112
+:1079C0003327000214E000172404008A92240009DF
+:1079D0002412000402002821308600FF10D200117A
+:1079E000240400810E000704020020218F8CFD98E2
+:1079F000240B00122403FFFE918D001B02002021A6
+:107A000035A80020A188001BA22B0009922A00059E
+:107A1000014310240E00070EA222000502002821B7
+:107A2000000020210E0007CF000000000A00090915
+:107A30008F9200388E5100043C0280003C100800F8
+:107A400026105640AC5100203C010800AC31564095
+:107A50009246000330C40004108001658F84FD94B9
+:107A600024020006A0820009924D001B2408FFC0DA
+:107A700031AC003F01885825A08B000892430003D9
+:107A8000306A00011540015C000000008E420008D1
+:107A9000AE0200083C0208008C4256481040015BD0
+:107AA0008F8EFD98000281C28F85FD94A5D0000CB9
+:107AB0008E5F000C240F000124090014ADDF002CA0
+:107AC0008E590010ADD9001C96470016A5C7003C82
+:107AD00096580014A5D8003EACAF000CA4AF00101F
+:107AE000A4AF0012A4AF0014A4AF00161260015F8F
+:107AF000A1C9001192440003309200022E530001EC
+:107B00008F920038266200080A000804AF820048FD
+:107B10008E4600043C0580003C048008ACA6002092
+:107B20008E4700089089000024110050312200FF88
+:107B3000105100B8240500883C0480008C8F01B8E7
+:107B400005E0FFFE0013802B3C18400900B810250B
+:107B5000AF9000483C101000AC860180AC870184D7
+:107B6000AC820188AC9001B80A0008058F8600300D
+:107B70008E4500043C0680003C098008ACC500200E
+:107B8000913F00002404005033F900FF132400B09B
+:107B9000240600883C0480008C8A01B80540FFFE62
+:107BA0003C0E400E00CE68253C081000AC850180DC
+:107BB000AC800184AC8D0188AC8801B8912B0000A9
+:107BC000240CFF8024040004016C182524060030D6
+:107BD0000E000674A12300000A0009098F920038E4
+:107BE0008E5000048F91FD983C0F8000ADF0002076
+:107BF0009225001B30A900101120007C2403008175
+:107C00003C0480008C8701B804E0FFFE3C1F401F4D
+:107C1000AC900180007F10250013C82B3C10100091
+:107C2000AC800184AF990048AC820188AC9001B867
+:107C30000A0008058F8600308E44001C0E0006EFF7
+:107C400000000000104000F8004038218F920038FA
+:107C5000240600893C0580008CAE01B805C0FFFEFB
+:107C600000000000ACA701808E50001C3C114001B8
+:107C70000013782B00D138253C131000ACB00184E0
+:107C8000AF8F0048ACA70188ACB301B80A00080563
+:107C90008F860030965900023C100800261056408E
+:107CA00033380004130000A33C0460008E5F001C06
+:107CB0003C068000ACDF00203C010800AC3F564091
+:107CC000964F000231E7000114E000E300000000DD
+:107CD0008E420004AE0200083C1008008E10564888
+:107CE000120000D93C0680008F85FD94241000010D
+:107CF0008CBF00188F91FD988F89FD9003E6C825F1
+:107D0000ACB90018A0A00005ACB0000C3C180800ED
+:107D10008F1856488F870038A4B00010001879C219
+:107D2000A4B00012A4B00014A4B00016A62F000C3A
+:107D30008CEE00088F8D00388F8C0038AE2E002C12
+:107D40008DA8000C24070002AE28001C918B0010A7
+:107D5000A22B00118F830038906A0011A12A00081D
+:107D60008F82003890440012A0A4004E8F920038F9
+:107D700092460013A22600128F920038965F0014DC
+:107D8000A63F003C96590016A639003E8E580018B2
+:107D9000AE3800145660FD4FAF8700483C05080020
+:107DA00024A556400E000713000020218F920038B2
+:107DB000000038210A000804AF8700483C0508008D
+:107DC00024A556400E000732240400828F9200380A
+:107DD0000A0008EC000038210E000E15000000001B
+:107DE0008F9200380A00095F000020210E0007046E
+:107DF000020020219232001B020020213658001080
+:107E00000E00070EA238001B8F9200380A000A4F9E
+:107E1000000018219243000C306A00011140000359
+:107E200000000000964B000EA48B002C9248000C22
+:107E3000310C00021180FF4000002821964E0012F4
+:107E40008E4D0014A48E001A0A000A1DAC8D001C71
+:107E50008F8300588F8700501067FF4E000030213D
+:107E60003C080800250855C4000320C000883021C4
+:107E70008CD10000122500C8246200013043000F9D
+:107E80001467FFFA000320C00A000A340000302102
+:107E90003C05080024A556400E0007322404008B40
+:107EA0008F9200380A0008EC0013382B3C0B0800B6
+:107EB0008D6B564024D8FFFE25710100322A007FC9
+:107EC0000147902102331024AD020028AE4600D0B5
+:107ED000AE4000D40A000855AE58001CACC0005497
+:107EE0003C0E08008DCE56403C09800C352C01001C
+:107EF000ACEE00288E500014AD9000D08E4D0014D2
+:107F0000AD8D00D48E4800102507FFFE0A000891B1
+:107F1000AD87001C5490FDAA240740000A0008BF4A
+:107F2000240710000E0007C3000000000A00090922
+:107F30008F9200388C83442C3C05DEAD34B2BEEF0A
+:107F40003C010800AC205640107200900000000078
+:107F50003C046C62348279701462000824040002CC
+:107F6000978A00549783004C020028210143482B34
+:107F70001120001924040092240400020E0005E4DC
+:107F8000240502003C0B8000AD6200203C0108008B
+:107F9000AC2256401040000D8F8E0038240C002873
+:107FA0002404000391CD001031A800FF550C0001FE
+:107FB000240400010E00004C0000000010400004EA
+:107FC000240400830A000A7F8F920038240400836F
+:107FD0003C05080024A556400E00071300000000D1
+:107FE0008F9200380013382B0A000804AF8700482E
+:107FF0000A0009E8240200128E4400080E0006EF71
+:10800000000000000A0009F4AE0200083C05080068
+:1080100024A556400E0006E3240400878F92003802
+:108020000A000A110013102B240400040E0005E4BA
+:108030002405003014400014004038218F9200388D
+:108040000A000A64240600833C05080024A5564063
+:108050000A000B45240400878E4400040E0006EF3E
+:10806000000000000A000A85AE0200083C05080076
+:1080700024A556400E000732240400828F92003857
+:108080000A000A11000010218F9200383C08800875
+:108090003C0C8000240B0050240A0001AD8200201B
+:1080A000A10B0000A10A000192490004A1090018D7
+:1080B00092440005A1040019924300063C04080004
+:1080C000248455C4A103001A924200073C0308000F
+:1080D000246355C0A102001B92450008A105001CA5
+:1080E00092460009A106001D925F000AA11F001E12
+:1080F0009259000BA119001F9258000CA1180020E2
+:108100009251000DA11100219250000EA1100022E9
+:10811000924F000FA10F0023924E0010A10E0024D9
+:10812000924D0011A10D0025964C0014A50C0028BD
+:10813000964B00168F8A00508F980058A50B002A86
+:1081400096490018000A10C025450001A509002C19
+:108150008E46001C0044C8210043F82130A5000FC2
+:10816000AFE60000AF27000010B80003AF85005055
+:108170000A000A640000302124AD000131A8000F7C
+:10818000000030210A000A64AF8800588C83442C18
+:108190000A000B243C046C623C07080024E755C02D
+:1081A00000879021ACC00000000030210A000A3492
+:1081B000AE4000003C0482013C03600034820E02A9
+:1081C000AC603D68AF80007803E00008AC623D6CB5
+:1081D00027BDFFE8AFB000103090FFFF001018423D
+:1081E0002C620041AFBF0014144000022404008040
+:1081F000240300403C010800AC3000603C01080052
+:10820000AC2300640E000E1E00602821244802BF2B
+:108210002409FF8001092824001039800010304013
+:108220008FBF00148FB0001000A7202100861821F6
+:10823000AF8300603C010800AC2500583C010800F9
+:10824000AC24005C03E0000827BD0018308300FF69
+:1082500030C6FFFF30E400FF3C0880008D0201B80B
+:108260000440FFFE00035400014438253C0960002F
+:1082700000E920253C031000AD050180AD06018416
+:10828000AD04018803E00008AD0301B88F86003813
+:108290003C096012352700108CCB00043C0C600EAA
+:1082A00035850010316A00062D480001ACE800C495
+:1082B0008CC40004ACA431808CC2000894C30002BA
+:1082C000ACA2318403E00008A78300708F850038DA
+:1082D0008F87FF208F86FF288CAE00043C0F601232
+:1082E00035E80010ACEE00688CAD0008ACED006C19
+:1082F0008CAC0010ACCC004C8CAB000CACCB004870
+:1083000094CA00543C0208008C42004425490001F4
+:10831000A4C9005494C400543083FFFF10620017B6
+:10832000000000003C0208008C420040A4C2005241
+:108330008CA30018ACE300308CA20014ACE2002C3B
+:108340008CB90018ACF900388CB800142405000171
+:10835000ACF800348D0600BC50C500198D0200B485
+:108360008D0200B8A4E2004894E40048A4E4004A66
+:1083700094E800DA03E000083102FFFF3C02080045
+:108380008C420024A4C00054A4C200528CA3001844
+:10839000ACE300308CA20014ACE2002C8CB90018C5
+:1083A000ACF900388CB8001424050001ACF8003496
+:1083B0008D0600BC54C5FFEB8D0200B88D0200B4E1
+:1083C000A4E2004894E40048A4E4004A94E800DAF7
+:1083D00003E000083102FFFF8F8600383C04800074
+:1083E0008CC900088CC80008000929C0000839C0E1
+:1083F000AC87002090C30007306200041040003AB0
+:10840000AF85007490CB0007316A00081140003935
+:108410008F87FF248CCD000C8CCE001401AE602B16
+:1084200011800032000000008CC2000CACE2007031
+:108430008CCB00188F85FF208F88FF28ACEB007451
+:108440008CCA00102402FFF8ACAA00C88CC9000C2A
+:10845000AD0900608CC4001CACA400C090E3007C9B
+:108460000062C824A0F9007C90D80007330F0008F0
+:1084700011E000040000000090ED007C35AC00012C
+:10848000A0EC007C90CF000731EE000111C0000984
+:108490000000000090E4007C2418000234820002F6
+:1084A000A0E2007C90A300EC307900FF13380013A9
+:1084B0002408003490C900073126000210C00004CF
+:1084C0000000000090EB007C356A0004A0EA007C0C
+:1084D00090ED007D31AC003FA0EC007D94A700DA68
+:1084E00003E0000830E2FFFF8F87FF240A000C5AE8
+:1084F0008CC200140A000C5BACE000700A000C7C1B
+:10850000ACA800CC8F8C003827BDFFD8AFB3001CBF
+:10851000AFB20018AFB00010AFBF0020AFB1001471
+:10852000918F00153C13600E3673001031EB000F75
+:10853000A38B007C8D8F00048D8B0008959F00120B
+:10854000959900109584001A9598001E958E001C30
+:1085500033EDFFFF332AFFFF3089FFFF3308FFFFB2
+:1085600031C7FFFF3C010800AC2D00243C0108008E
+:10857000AC2900443C010800AC2A0040AE683178C8
+:10858000AE67317C91850015959100163C12601202
+:108590003652001030A200FF3230FFFFAE62318849
+:1085A000AE5000B491830014959F0018240600017A
+:1085B0000066C80433F8FFFFAE5900B8AE5800BCDF
+:1085C000918E0014AF8F00643C08600631CD00FF2F
+:1085D000AE4D00C0918A00159584000E3C07600ADC
+:1085E000314900FFAF8B00683084FFFFAE4900C8FF
+:1085F000351100100E000BC334F004103C020800CB
+:108600008C4200603C0308008C6300643C06080058
+:108610008CC600583C0508008CA5005C8F84006067
+:108620008FBF0020AE23004CAE65319CAE030054DA
+:10863000AE4500DCAE6231A0AE6331A4AE663198C7
+:10864000AE2200488FB3001CAE0200508FB1001460
+:10865000AE4200E0AE4300E4AE4600D88FB000105A
+:108660008FB200180A0004CC27BD0028978500723D
+:108670009783005C27BDFFE8AFB0001000A3102B6C
+:10868000AFBF0014240400058F900038104000553F
+:10869000240900020E0005E48F850060AF8200749B
+:1086A000240400031040004F240900023C0680000F
+:1086B0000E00004CACC2002024070001240820005A
+:1086C0001040004D24040005978E00728F8AFF240D
+:1086D0002409005025C50001A7850072A1490000AA
+:1086E0003C0D08008DAD0064240380008F84FF20C2
+:1086F000000D6600AD4C0018A5400006954B000A21
+:108700008F85FF282402FF8001633024A546000ADC
+:10871000915F000A0000482103E2C825A159000A20
+:10872000A0A00008A140004CA08000C5961800023F
+:10873000978300703C020004A49800DA960F0002B0
+:108740002418FFBF25EE2401A48E00AE8E0D000478
+:10875000ACAD00448E0C0008ACAC0040A4A00050AE
+:10876000A4A000548E0B000C240C0030AC8B00280D
+:108770008E060010AC860024A480003EA487004E24
+:10878000A4870050A483003CAD420074AC8800C8AC
+:10879000ACA80060A08700EC909F00C433F9007F74
+:1087A000A09900C4909000C402187824A08F00C43F
+:1087B000914E007C35CD0001A14D007C938B007C57
+:1087C000AD480070AC8C00CCA08B00C68F880068D0
+:1087D0008F870064AC8800B4AC8700B8A5400078EF
+:1087E000A540007A8FBF00148FB000100120102127
+:1087F00003E0000827BD00188F8500740E00067482
+:108800008F8600600A000D482409000227BDFFE0A2
+:10881000AFB000108F900038AFB10014AFBF001898
+:108820008E0900040E000499000921C08E0800047E
+:108830008F84FF208F82FF28000839C03C0680000B
+:10884000ACC70020948500DA904300131460001C2C
+:1088500030B1FFFF8F8CFF24918B0008316A0040FC
+:108860001540000B000000008E0D00040220302196
+:108870008FBF00188FB100148FB0001024040022A5
+:1088800000003821000D29C00A000BE227BD00209E
+:108890000E000063000000008E0D00040220302155
+:1088A0008FBF00188FB100148FB000102404002275
+:1088B00000003821000D29C00A000BE227BD00206E
+:1088C0000E00005B000000008E0D0004022030212D
+:1088D0008FBF00188FB100148FB000102404002245
+:1088E00000003821000D29C00A000BE227BD00203E
+:1088F00027BDFFE0AFB200183092FFFFAFB000100D
+:10890000AFBF001CAFB100141240001E0000802158
+:108910008F8600388CC500002403000600053F0246
+:108920000005140230E4000714830016304500FFF0
+:108930002CA8000611000040000558803C0C0800DF
+:10894000258C532C016C50218D490000012000081A
+:10895000000000008F8E0078240D000111CD005022
+:1089600024020002AF820078260900013130FFFFA7
+:1089700024C800200212202B010030211480FFE5C2
+:10898000AF880038020010218FBF001C8FB2001882
+:108990008FB100148FB0001003E0000827BD002045
+:1089A0009387005E54E00034000030210E000C90EC
+:1089B000000000008F8600380A000DA82402000184
+:1089C0008F8700782405000210E50031240400138D
+:1089D0000000282100003021240700010E000BE2D6
+:1089E000000000000A000DA98F8600388F830078F0
+:1089F000240200021462FFF6240400120E000C454B
+:108A0000000000008F850074004030212404001213
+:108A10000E000BE2000038210A000DA98F860038F5
+:108A20008F8300782411000310710029241F000295
+:108A3000107FFFCE26090001240400100000282129
+:108A4000000030210A000DC6240700018F91007834
+:108A5000240600021626FFF9240400100E000CEA7A
+:108A600000000000144000238F9800388F860038E3
+:108A70000A000DA824020003240400140E000BE2D7
+:108A8000000028218F8600380A000DA82402000269
+:108A90000E000D52000000000A000DA98F8600385C
+:108AA0000E000BF200000000241900022404001440
+:108AB000000028210000302100003821AF99007803
+:108AC0000E000BE2000000000A000DA98F8600389E
+:108AD0000E000C02000000008F85007424190002B3
+:108AE0000040302124040010000038210A000DFF4E
+:108AF000AF9900780040382124040010970F00023D
+:108B0000000028210E000BE231E6FFFF8F860038BF
+:108B10000A000DA9AF9100788F84FF243C077FFFE6
+:108B200034E6FFFF8C8500182402000100A61824FB
+:108B3000AC83001803E00008A08200053084FFFF2A
+:108B400030A5FFFF108000070000182130820001CF
+:108B50001040000200042042006518211480FFFB31
+:108B60000005284003E000080060102110C0000745
+:108B7000000000008CA2000024C6FFFF24A5000412
+:108B8000AC82000014C0FFFB2484000403E0000852
+:108B90000000000010A0000824A3FFFFAC86000026
+:108BA00000000000000000002402FFFF2463FFFF1C
+:108BB0001462FFFA2484000403E0000800000000AF
+:108BC000000411C003E000082442024027BDFFE872
+:108BD000AFB0001000808021AFBF00140E000E3F28
+:108BE00000A0202100504821240AFF808FBF0014DC
+:108BF0008FB00010012A30243127007F3C08800A02
+:108C00003C04210000E8102100C428253C0380001A
+:108C100027BD0018AC650024AF820024AC400000E2
+:108C2000AC65002403E00008AC4000403C0D0800A7
+:108C30008DAD005800056180240AFF8001A45821F1
+:108C4000016C4821012A30243127007F3C08800C28
+:108C50003C04210000E8102100C428253C038000CA
+:108C6000AC650028AF82002003E00008AC4000247F
+:108C700030A5FFFF3C0680008CC201B80440FFFE17
+:108C80003C08601500A838253C031000ACC40180E6
+:108C9000ACC00184ACC7018803E00008ACC301B8D4
+:108CA0003C0D08008DAD005800056180240AFF804E
+:108CB00001A45821016C4021010A482400093140D7
+:108CC0003107007F00C728253C04200000A4182598
+:108CD0003C028000AC43083003E00008AF80002075
+:108CE00027BDFFE8AFB0001000808021AFBF0014A7
+:108CF0000E000E3F00A0202100504821240BFF80D1
+:108D0000012B5024000A39403128007F3C06200006
+:108D10008FBF00148FB0001000E8282534C2000176
+:108D200000A218253C04800027BD0018AC83083041
+:108D300003E00008AF8000243C0580088CA7006099
+:108D40003C0680080087102B144000112C83400043
+:108D50008CA800602D0340001060000F2403400029
+:108D60008CC900600089282B14A000020080182103
+:108D70008CC3006000035A42000B30803C0A08009C
+:108D8000254A53A000CA202103E000088C8200007D
+:108D90001460FFF32403400000035A42000B3080AC
+:108DA0003C0A0800254A53A000CA202103E000081D
+:108DB0008C8200003C05800890A6000893840088FF
+:108DC00024C20001304200FF3043007F1064000CD9
+:108DD00000023827A0A200083C0480008C8501789E
+:108DE00004A0FFFE8F8A0080240900023C081000C6
+:108DF000AC8A0140A089014403E00008AC880178F6
+:108E00000A000EC430E2008027BDFFD8AFB20018C0
+:108E10008F920084AFBF0020AFB3001CAFB0001032
+:108E2000AFB100148F9300208E5900283C100080B1
+:108E30003C0EFFEFAE7900008E580024A260000ABD
+:108E400035CDFFFFAE7800049251002C3C0BFF9F04
+:108E5000356AFFFFA271000C8E6F000C3C080040C9
+:108E6000A271000B01F06025018D4824012A3824ED
+:108E700000E83025AE66000C8E450004AE60001898
+:108E80003C0400FFAE6500148E43002C3482FFFFCB
+:108E9000A66000080062F824AE7F00108E5900081A
+:108EA0008F900080964E0012AE7900208E51000CFB
+:108EB00031D83FFF00187980AE7100248E4D001428
+:108EC00001F0602131CB0001AE6D00288E4A001800
+:108ED000000C41C2000B4B80AE6A002C8E46001C79
+:108EE00001093821A667001CAE66003096450002D5
+:108EF0008E440020A665001EAE6400349243003309
+:108F00003062000454400006924700003C02800892
+:108F1000344301008C7F00C0AE7F003092470000D8
+:108F20008F860024A0C700309245003330A4000291
+:108F300050800007925100018F880024240BFF808D
+:108F4000910A0030014B4825A109003092510001DF
+:108F50008F900024240CFFBF2404FFDFA2110031F6
+:108F60008F8D00243C1880083711008091AF003CA1
+:108F700031EE007FA1AE003C8F890024912B003C94
+:108F8000016C5024A12A003C8F9F00248E6800149D
+:108F900093E6003C2D0700010007114000C428247F
+:108FA00000A21825A3E3003C8F87002496590012E5
+:108FB000A4F900328E450004922E007C30B00003EC
+:108FC0000010782331ED000300AD102131CC0002F8
+:108FD0001580000224460034244600303C028008FC
+:108FE00034430080907F007C00BFC82433380004E5
+:108FF0001700000224C2000400C010218F98002432
+:1090000024190002ACE20034A3190000924F003F83
+:109010008F8E00243C0C8008358B0080A1CF00018E
+:109020008F910024924D003F8E440004A62D000233
+:10903000956A005C0E000E9D3150FFFF00024B80D0
+:10904000013038253C08420000E82825AE25000400
+:109050008E4400388F850024ACA400188E4600345E
+:10906000ACA6001CACA0000CACA00010A4A0001486
+:10907000A4A00016A4A00020A4A00022ACA000245C
+:109080008E62001450400001240200018FBF0020B6
+:109090008FB3001C8FB200188FB100148FB0001076
+:1090A000ACA200080A000EBC27BD002827BDFFC8DF
+:1090B0003C05800834A40080AFBF0034AFBE003050
+:1090C000AFB7002CAFB60028AFB50024AFB4002076
+:1090D000AFB3001CAFB20018AFB10014AFB00010B6
+:1090E000948300789482007A104300512405FFFF96
+:1090F0000080F0210A000FCC0080B821108B004DB9
+:109100008FBF00348F8600803C1808008F18005CE9
+:109110002411FF803C1680000306782101F1802491
+:10912000AED0002C96EE007A31EC007F3C0D800E24
+:1091300031CB7FFF018D5021000B4840012AA8212F
+:1091400096A400003C0808008D0800582405FF8004
+:1091500030953FFF01061821001539800067C821AE
+:109160000325F8243C02010003E290253338007FF8
+:109170003C11800CAED20028031190219250000DBA
+:10918000320F000411E0003702E0982196E3007AE4
+:1091900096E8007A96E5007A2404800031077FFF84
+:1091A00024E3000130627FFF00A4F82403E2C82515
+:1091B000A6F9007A96E6007A3C1408008E940060C6
+:1091C00030D67FFF12D400C1000000008E58001876
+:1091D0008F84008002A028212713FFFF0E000E7746
+:1091E000AE53002C97D5007897D4007A12950010D2
+:1091F000000028213C098008352401003C0A800831
+:1092000091480008908700C53114007F30E400FFCA
+:109210000284302B14C0FFB9268B0001938E008886
+:10922000268C0001008E682115ACFFB78F86008068
+:109230008FBF00348FBE00308FB7002C8FB6002850
+:109240008FB500248FB400208FB3001C8FB200189C
+:109250008FB100148FB0001000A0102103E00008AF
+:1092600027BD003800C020210E000E4202802821B8
+:109270008E4B00108E4C00308F8400242409000295
+:10928000016C5023AE4A0010A089000096E3005CF8
+:109290008E4400308F9100240E000E9D3070FFFF31
+:1092A00000024380011028253C07420000A710253A
+:1092B000AE2200048E5F00048F8A00248E590000C5
+:1092C000240B0008AD5F001CAD590018AD40000C28
+:1092D000AD4000109246000A240400052408C00096
+:1092E00030D000FFA550001496580008A55800166D
+:1092F0009251000A3C188008322F00FFA54F002031
+:10930000964E000837110100A54E0022AD40002402
+:10931000924D000B31AC00FFA54C0002A14B0001A7
+:109320008E4900308F830024240BFFBFAC690008F6
+:10933000A06400308F9000242403FFDF96070032E2
+:1093400000E8282400B51025A6020032921F003242
+:1093500033F9003F37260040A20600328F8C0024EC
+:10936000AD8000348E2F00C0AD8F0038918E003C50
+:109370003C0F7FFF31CD007FA18D003C8F84002406
+:1093800035EEFFFF908A003C014B4824A089003C49
+:109390008F85002490A8003C01033824A0A7003C3E
+:1093A0008E4200348F9100243C038008AE2200409E
+:1093B0008E59002C8E5F0030033F3023AE260044D0
+:1093C000923000483218007FA23800488F8800246D
+:1093D0008E4D00308D0C004801AE5824019650246B
+:1093E000014B4825AD0900489244000AA104004CF5
+:1093F000964700088F850024A4A7004E8E500030A9
+:109400008E4400300E0002E68C65006092F9007C0C
+:109410000002F940004028210002110003E230213F
+:109420003336000212C00003020680210005B0801E
+:1094300002168021926D007C31B30004126000029C
+:1094400000057080020E80218E4B003024058000C4
+:10945000316A0003000A4823312400030204182162
+:109460008F900024AE03003496E4007A96E8007AE8
+:1094700096F1007A31077FFF24E20001305F7FFF21
+:109480000225C824033F3025A6E6007A96F8007A24
+:109490003C1208008E520060330F7FFF11F200185B
+:1094A000000000008F8400800E000E7702A02821AB
+:1094B0008F8400800E000E87028028210E000EBCD3
+:1094C000000000000A000FC80000000096F1007ABA
+:1094D00002248024A6F0007A92EF007A92EB007AC0
+:1094E00031EE00FF000E69C2000D6027000C51C074
+:1094F0003169007F012A20250A000FC2A2E4007A08
+:1095000096E6007A00C5C024A6F8007A92EF007AA9
+:1095100092F3007A31F200FF001271C2000E682748
+:10952000000DB1C0326C007F01962825A2E5007ABB
+:109530000A0010798F8400803C0380003084FFFF94
+:1095400030A5FFFFAC640018AC65001C03E0000808
+:109550008C62001427BDFFA83C068008AFBE0050F7
+:10956000AFBF0054AFB7004CAFB60048AFB5004432
+:10957000AFB40040AFB3003CAFB20038AFB100347D
+:10958000AFB0003034C80100910500C590C7000895
+:10959000309EFFFF30A500FF30E2007F0045182A13
+:1095A000A7A00014A7A0001E10600053AFA00010D9
+:1095B00090C900083126007F00A620232493FFFFD6
+:1095C0000013802B001E882B0211782451E00084A8
+:1095D0008FB300103C19800897360052973700501F
+:1095E000001EC40002D7A8230015A4000014140311
+:1095F00003C2902A1640000200182C0300402821C4
+:10960000001314000002240300A4F82A57E000010C
+:1096100000A0202128830009146000020080A021FE
+:10962000241400083C0A80088D4500480014498035
+:109630008D48004C3C0380003124FFFF3C060010A5
+:109640000086382534710400AC650038AF91008481
+:10965000AC68003CAC670030000000000000000077
+:1096600000000000000000000000000000000000FA
+:1096700000000000000000008C6C0000318B002016
+:109680001160FFFD0014682A01B010241040003959
+:109690000000A8213C16800892D700083C128000E8
+:1096A0008E44010032F6007F0E000E4202C02821D7
+:1096B0008E2F00108E4401000000902131F73FFFF3
+:1096C0000E000E5A02E02821922E000031C2003F07
+:1096D0002C50000852000010000088210002F88081
+:1096E0003C0308002463535403E3C8218F3800006F
+:1096F000030000080000000090CE0008938B008853
+:1097000031CD007F00AD6023016C50210A0010BFF5
+:109710002553FFFF000088213C1080008E040100CB
+:109720000E000E7702E028218E0401000E000E8745
+:1097300002C028211220000F0013802B8F8A008482
+:1097400026A900010009AC00027298230015AC03A1
+:109750002545004002B4B02A0013802B24170001D5
+:1097600000A0882102D01024AF8500841440FFC9D6
+:10977000AFB700103C07800894F100503C05800012
+:109780003C06002002B1C821A4F90050ACA600306C
+:1097900094F4005094E3005203D560231074001D2C
+:1097A000319EFFFF8CE5004C8CE90048001561807C
+:1097B00000ACB0210000A02102CCA82B0134502124
+:1097C0000155B821ACF6004CACF70048001E882BC0
+:1097D0000211782415E0FF803C1980088FB3001037
+:1097E0008FBF00548FBE00503A6200018FB7004C0B
+:1097F0008FB600488FB500448FB400408FB3003C53
+:109800008FB200388FB100348FB0003003E0000811
+:1098100027BD005894F200548CEF0044325FFFFEE5
+:10982000001FC0C001F87021ACAE003C8CEB0044BE
+:109830008CAD003C016D40231900003B000000008E
+:109840008CE20040244200013C07005034E4001048
+:109850003C038000ACA20038AC6400300000000083
+:1098600000000000000000000000000000000000F8
+:109870000000000000000000000000008C760000E6
+:1098800032D7002012E0FFFD3C11800896280054DA
+:109890003C0A80003C06800831190001001960C0B4
+:1098A000018AA0218E8304003C0708008CE7004455
+:1098B0003C150020ACC300488E8904042405000137
+:1098C000ACC9004C10E50259AD550030963F00522E
+:1098D0003C0508008CA5004000BFC021A6380052FE
+:1098E000962F005425EE0001A62E00549626005413
+:1098F00030C4FFFF5487FF34001E882B30A5FFFFC4
+:109900000E00109DA62000543C0408008C84002406
+:10991000962700520044102300E29023A632005202
+:109920000A0010C1001E882B8CE200400A00116260
+:109930003C07005092280001240700013102007FFB
+:109940001447001C97AC001E8E2A0014240BC00084
+:1099500031443FFF018B48243C0608008CC6006060
+:109960000124282530A43FFF0086882B12200011F7
+:10997000A7A5001E3C1108008E3100588F82008080
+:10998000000441802407FF80022218210068F8218A
+:1099900003E7C82433EF007F3C1880003C12800EA0
+:1099A000AF19002C01F2682191AE000D35D00004F2
+:1099B000A1B0000D0E000ED12412000124110001EF
+:1099C0003C1080008E0401000E000E7702E028217A
+:1099D0008E0401000E000E8702C028211620FF58B9
+:1099E0008F8A00840A00112C0013802B8F8600843C
+:1099F00090C900013125002010A0018A2410000127
+:109A00003C048008348C0080918B007C8F91002076
+:109A100000009021316A00011140000FAFB000201A
+:109A20008CD000148C8E0060020E682B15A00003F1
+:109A3000020038218C8700603C0480083483008059
+:109A40008C72007000F2782B15E0000200E02021FB
+:109A50008C640070008090213C07800834E5008011
+:109A60008CD900148CBF0070033FC02B170000027C
+:109A7000032020218CA400700092182310600003A2
+:109A8000AFA3002824080002AFA800208FA5002063
+:109A90000265102B144000B5000018218CC400385A
+:109AA0008E2F000C3C180080AE2400008CCE0034B9
+:109AB0003C10FF9F01F86025AE2E000490CB003FC4
+:109AC000360DFFFF018D48243C0A00203C06FFEFC5
+:109AD000A22B000B012A382534C5FFFF00E54024E6
+:109AE0003C0200088F87008401022025AE24000C70
+:109AF0008CE30014AE2000188FAF0028AE230014B2
+:109B00008CF800183C1FFFFB37F9FFFFAE38001C34
+:109B10008CEE000800996824024F8021AE2E0024AC
+:109B20008CEC000CAE2D000CA6200038A620003ACC
+:109B3000AE30002CAE2C0020AE2000288CEB0014A0
+:109B40008FAA002801724823012A302310C0001177
+:109B5000AE26001090F0003D8E2C00048E2A0000EE
+:109B600000106900018D28210000102100AD302B6C
+:109B70000142482101264021AE250004AE28000004
+:109B800090E3003DA223000A8F9F008497F900060E
+:109B9000A63900088F8A0024240200023C068008AF
+:109BA000A142000034C900809525005C02402021BC
+:109BB0008F90002430A8FFFF0E000E9DAFA8002458
+:109BC0008FA300240002FB808F8500843C044200A8
+:109BD00003E3C8250324C025AE1800048F840024A5
+:109BE0008CAF0038AC8F00188CAE0034AC8E001CEB
+:109BF000AC80000CAC800010A4800014A48000167F
+:109C0000A4800020A4800022AC80002490A7003F04
+:109C1000A48700025240018C240700018FAB00286A
+:109C20005160000290A2003D90A2003E244C000131
+:109C3000A08C00018F840024AC9200083C1880089E
+:109C400037100080920F007C31EE000215C0000238
+:109C500024070034240700308F8500843C088008E6
+:109C60003509008090A300009128007C3259000340
+:109C7000A08300308F9F00848F9000242404000470
+:109C800093F8000100997823240DC000A218003138
+:109C90008F9900248F8E008431E50003972C0032C9
+:109CA00095CB001200F24821018D502431623FFF14
+:109CB00001423025A72600329323003201253821A6
+:109CC00031080004307F003F37E40040A324003215
+:109CD000124000028F85002400E838213C0C8008E7
+:109CE000ACA70034358B01008D6200C02E4400010A
+:109CF0002403FFDFACA2003890AA003C0004C94056
+:109D00003146007FA0A6003C8F8900242405FFBFB8
+:109D10009127003C00E54024A128003C8F8F0024BF
+:109D200091FF003C03E3C02403198025A1F0003C0F
+:109D30008F8B00848F8A00248D6E0020AD4E0040F2
+:109D40008D6D0024AD4D00448D6C0028AD4C004855
+:109D50008D62002C0E000EBCAD42004C8FA6002080
+:109D60002407000210C700118FA300200003202B3E
+:109D700000048023027098240060802100609021FC
+:109D80000A0011150010882B962700128F8400807E
+:109D90000000902130E5FFFFA7A700140E000E6B16
+:109DA000241100010A0011C03C1080003C19800001
+:109DB0003C0280088F240100905800080E000E42DB
+:109DC0003305007F8F8E00248FAF00208FA40028E2
+:109DD000A1CF00000E000E9D8F9000248FAD0024B7
+:109DE00000023B803C0B420000ED40258F87008441
+:109DF000010B2025AE0400048CE500388F90002470
+:109E000000005021000A1900AE0500188CEC003447
+:109E10003C087FFF3504FFFFAE0C001C90E9003EBC
+:109E20008E1F001C8E1800180009C9000009370297
+:109E300003F968210066102501B9782B030270210F
+:109E400001CF5821AE0D001CAE0B0018AE00000C67
+:109E5000AE00001090E5003E8FAF0028240E0005F4
+:109E6000A605001494EC00042405C00001E4582465
+:109E7000A60C001690EA003E01E02021A60A002070
+:109E800094E60004A6060022AE00002490E3003F02
+:109E9000A603000290E9003E90FF003D03E9C823BD
+:109EA00027380001A21800018F8D00243C10800883
+:109EB000ADAF0008A1AE00308F9800248F820084DF
+:109EC000360F0100970C0032944A00122410FF80D4
+:109ED00000AC382431463FFF00E61825A7030032C6
+:109EE000930900322405FFBF2403FFDF313F003F09
+:109EF00037F90040A31900328F8C00242418FFFF8B
+:109F0000AD8000348DEE00C0AD8E0038918D003CE8
+:109F100031A2007FA182003C8F87002490EA003CA0
+:109F200001453024A0E6003C8F9900249329003C91
+:109F30000123F824A33F003C8F8D00243C1F8008A0
+:109F4000ADB80040ADB2004491AF00483C12800073
+:109F500001F07025A1AE00488F8700248F86008411
+:109F60008CEC004801921024004B5025ACEA0048CC
+:109F700090C5003EA0E5004C8F8800848F830024AC
+:109F800095090004A469004E8FE500600E0002E60A
+:109F9000000000008F99FF2C8FAE00280002814046
+:109FA000932F007C0002C1000218682131F20002E8
+:109FB00000402821164000AA01CD30213C0A80082B
+:109FC000354300809069007C313F000413E00003BA
+:109FD0008FAE00280005608000CC3021240D0004E5
+:109FE0008F90002431C7000301A758233168000374
+:109FF00000C82021AE0400343C068008A6250038A5
+:10A000003C0580008CA4010090D100080E000E8752
+:10A010003225007F0E000EBC000000000A0012AACC
+:10A020008FA300208F8500208CC2003824180003E5
+:10A03000A4A00008ACA200008CDF0034A0A0000A9D
+:10A040008F920084ACBF00043C040080924F003F1C
+:10A05000A0B8000C8CAE000C3C0DFF9FA0AF000B15
+:10A0600001C4402535ABFFFF3C11FFEF8F98008402
+:10A07000010B30243639FFFF00D96024ACAC000C52
+:10A080008F030014971F00128F870080ACA300106D
+:10A090008F090014ACA00018ACA00020ACA90014DB
+:10A0A000ACA000248F0A001833E93FFF000911809B
+:10A0B000ACAA00288F1200080047782133EE000177
+:10A0C000ACB200308F08000C8F990024000F69C2D9
+:10A0D000000E238001A45821241100023C068008B0
+:10A0E000A4AB001CA4A00034ACA8002CA331000039
+:10A0F00034D90080972C005C8F8F00243C034200F1
+:10A10000318AFFFF01433825ADE700048F820084C8
+:10A11000241800012411C0008C5F0038240700348B
+:10A12000ADFF00188C520034ADF2001CADE0000C05
+:10A13000ADE00010A5E00014A5E00016A5E00020A9
+:10A14000A5E00022ADE00024A5F00002A1F8000186
+:10A150008F8B00248F8E0084AD70000891CD00009D
+:10A16000A16D00308F8800848F8400249105000148
+:10A17000A08500318F920024964C0032019150242A
+:10A1800001491825A6430032925F003233E2003FB6
+:10A19000A24200329338007C330F000215E0000227
+:10A1A0008F840024240700303C028008AC870034F0
+:10A1B000345201008E5F00C0240EFFBF02009021C8
+:10A1C000AC9F00389098003C330F007FA08F003C7C
+:10A1D0008F880024910D003C01AE5824A10B003C57
+:10A1E0008F86002490D1003C36390020A0D9003C55
+:10A1F0008F8A00848F8500240010882B8D4C0020CE
+:10A20000ACAC00408D430024ACA300448D49002831
+:10A21000ACA900488D47002CACA7004C0E000EBC2A
+:10A220003C1080000A0011160000000094CD00527E
+:10A230003C0B08008D6B0024016D8821A4D10052D5
+:10A240000A0010C1001E882BA08700018F84002403
+:10A25000240D0001AC8D00080A00125F3C18800834
+:10A26000000290800A00133E00D2302127BDFFE09B
+:10A270003C0D8008AFB20018AFB00010AFBF001C9B
+:10A28000AFB1001435B200808E4C001835A8010023
+:10A29000964B000695A70050910900EC000C560261
+:10A2A000016728233143007F312600FF2402000389
+:10A2B000A3830088AF84008010C2001B30B0FFFF72
+:10A2C000910600EC2412000530C200FF105200334A
+:10A2D00000000000160000098FBF001C8FB200189C
+:10A2E0008FB100148FB00010240D0C003C0C8000C6
+:10A2F00027BD002003E00008AD8D00240E0010A44F
+:10A30000020020218FBF001C8FB200188FB10014F3
+:10A310008FB00010240D0C003C0C800027BD0020E5
+:10A3200003E00008AD8D0024965800789651007A1D
+:10A33000924E007D0238782631E8FFFF31C400C01C
+:10A34000148000092D1100011600003700000000E4
+:10A350005620FFE28FBF001C0E000F7A00000000A5
+:10A360000A0014068FBF001C1620FFDA0000000050
+:10A370000E000F7A000000001440FFD88FBF001CB1
+:10A380001600002200000000925F007D33E2003FD3
+:10A39000A242007D0A0014068FBF001C950900DA56
+:10A3A0008F86006000802821240400050E000674BA
+:10A3B0003130FFFF978300723C0480002465FFFF6B
+:10A3C000A78500728C8A01B80540FFFE00000000DE
+:10A3D000AC8001808FBF001CAC9001848FB200184C
+:10A3E0008FB100148FB000103C0760133C0B1000BD
+:10A3F000240D0C003C0C800027BD0020AC87018898
+:10A40000AC8B01B803E00008AD8D00240E0010A451
+:10A41000020020215040FFB18FBF001C925F007DE1
+:10A420000A00143333E2003F0E0010A40200202182
+:10A430001440FFAA8FBF001C12200007000000007C
+:10A440009259007D3330003F36020040A242007D29
+:10A450000A0014068FBF001C0E000F7A00000000D7
+:10A460005040FF9E8FBF001C9259007D3330003F4B
+:08A470000A00146236020040EC
+:08A47800000000000000001BC1
+:10A480000000000F0000000A0000000800000006A5
+:10A4900000000005000000050000000400000004AA
+:10A4A00000000003000000030000000300000003A0
+:10A4B0000000000300000002000000020000000293
+:10A4C0000000000200000002000000020000000284
+:10A4D0000000000200000002000000020000000274
+:10A4E0000000000200000002000000020000000264
+:0CA4F0000000000100000001000000015D
+:04A4FC0080080100D3
+:10A50000800800808008000000000C0000003080FF
+:10A5100008000F4808000FF40800100C0800102075
+:10A520000800103408000F4808000F4808001068A1
+:10A53000080010A0080010B0080010D8080017C8C4
+:10A54000080017C8080018000800180008001814B0
+:10A55000080017E408001A3C08001A0808001A94BA
+:10A5600008001A9408001B1C08001A4C80080240BE
+:10A57000080021A808001FF4080021D00800226864
+:10A58000080023B808002404080025280800243007
+:10A59000080024B408002064080029D008002974A9
+:10A5A0000800201008002010080020100800259C3A
+:10A5B0000800259C08002010080020100800284CE6
+:10A5C00008002010080020100800201008002010AB
+:10A5D000080028AC080020100800201008002010F7
+:10A5E000080020100800201008002010080020108B
+:10A5F000080020100800201008002010080020107B
+:10A600000800201008002010080020100800242452
+:10A6100008002010080020100800291C0800201045
+:10A62000080020100800201008002010080020104A
+:10A63000080020100800201008002010080020103A
+:10A64000080020100800201008002010080020102A
+:10A65000080020100800201008002010080020101A
+:10A66000080027700800201008002010080026E4C9
+:10A6700008002640080037880800375C08003728A3
+:10A68000080036FC080036DC08003690800801001F
+:10A69000800800808008000080080080080046F0E4
+:10A6A0000800472808004670080046F0080046F0F9
+:0CA6B00008004450080046F008004AC4AE
+:04A6BC000A000C760E
+:10A6C00000000000000000000000000D72787035EE
+:10A6D0002E302E306A390000050000030000000013
+:10A6E0000000000100000000000000000000000069
+:10A6F000000000000000000000000000000000005A
+:10A700000000000000000000000000000000000049
+:10A710000000000000000000000000000000000039
+:10A720000000000000000000000000000000000029
+:10A730000000000000000000000000000000000019
+:10A740000000000000000000000000000000000009
+:10A7500000000000000000000000000000000000F9
+:10A7600000000000000000000000000000000000E9
+:10A7700000000000000000000000000000000000D9
+:10A7800000000000000000000000000000000000C9
+:10A7900000000000000000000000000000000000B9
+:10A7A00000000000000000000000000000000000A9
+:10A7B0000000000000000000000000000000000099
+:10A7C0000000000000000000000000000000000089
+:10A7D0000000000000000000000000000000000079
+:10A7E0000000000000000000000000000000000069
+:10A7F0000000000000000000000000000000000059
+:10A800000000000000000000000000000000000048
+:10A810000000000000000000000000000000000038
+:10A820000000000000000000000000000000000028
+:10A830000000000000000000000000000000000018
+:10A840000000000000000000000000000000000008
+:10A8500000000000000000000000000000000000F8
+:10A8600000000000000000000000000000000000E8
+:10A8700000000000000000000000000000000000D8
+:10A8800000000000000000000000000000000000C8
+:10A8900000000000000000000000000000000000B8
+:10A8A00000000000000000000000000000000000A8
+:10A8B0000000000000000000000000000000000098
+:10A8C0000000000000000000000000000000000088
+:10A8D0000000000000000000000000000000000078
+:10A8E0000000000000000000000000000000000068
+:10A8F0000000000000000000000000000000000058
+:10A900000000000000000000000000000000000047
+:10A910000000000000000000000000000000000037
+:10A920000000000000000000000000000000000027
+:10A930000000000000000000000000000000000017
+:10A940000000000000000000000000000000000007
+:10A9500000000000000000000000000000000000F7
+:10A9600000000000000000000000000000000000E7
+:10A9700000000000000000000000000000000000D7
+:10A9800000000000000000000000000000000000C7
+:10A9900000000000000000000000000000000000B7
+:10A9A00000000000000000000000000000000000A7
+:10A9B0000000000000000000000000000000000097
+:10A9C0000000000000000000000000000000000087
+:10A9D0000000000000000000000000000000000077
+:10A9E0000000000000000000000000000000000067
+:10A9F0000000000000000000000000000000000057
+:10AA00000000000000000000000000000000000046
+:10AA10000000000000000000000000000000000036
+:10AA20000000000000000000000000000000000026
+:10AA30000000000000000000000000000000000016
+:10AA40000000000000000000000000000000000006
+:10AA500000000000000000000000000000000000F6
+:10AA600000000000000000000000000000000000E6
+:10AA700000000000000000000000000000000000D6
+:10AA800000000000000000000000000000000000C6
+:10AA900000000000000000000000000000000000B6
+:10AAA00000000000000000000000000000000000A6
+:10AAB0000000000000000000000000000000000096
+:10AAC0000000000000000000000000000000000086
+:10AAD0000000000000000000000000000000000076
+:10AAE0000000000000000000000000000000000066
+:10AAF0000000000000000000000000000000000056
+:10AB00000000000000000000000000000000000045
+:10AB10000000000000000000000000000000000035
+:10AB20000000000000000000000000000000000025
+:10AB30000000000000000000000000000000000015
+:10AB40000000000000000000000000000000000005
+:10AB500000000000000000000000000000000000F5
+:10AB600000000000000000000000000000000000E5
+:10AB700000000000000000000000000000000000D5
+:10AB800000000000000000000000000000000000C5
+:10AB900000000000000000000000000000000000B5
+:10ABA00000000000000000000000000000000000A5
+:10ABB0000000000000000000000000000000000095
+:10ABC0000000000000000000000000000000000085
+:10ABD0000000000000000000000000000000000075
+:10ABE0000000000000000000000000000000000065
+:10ABF0000000000000000000000000000000000055
+:10AC00000000000000000000000000000000000044
+:10AC10000000000000000000000000000000000034
+:10AC20000000000000000000000000000000000024
+:10AC30000000000000000000000000000000000014
+:10AC40000000000000000000000000000000000004
+:10AC500000000000000000000000000000000000F4
+:10AC600000000000000000000000000000000000E4
+:10AC700000000000000000000000000000000000D4
+:10AC800000000000000000000000000000000000C4
+:10AC900000000000000000000000000000000000B4
+:10ACA00000000000000000000000000000000000A4
+:10ACB0000000000000000000000000000000000094
+:10ACC0000000000000000000000000000000000084
+:10ACD0000000000000000000000000000000000074
+:10ACE0000000000000000000000000000000000064
+:10ACF0000000000000000000000000000000000054
+:10AD00000000000000000000000000000000000043
+:10AD10000000000000000000000000000000000033
+:10AD20000000000000000000000000000000000023
+:10AD30000000000000000000000000000000000013
+:10AD40000000000000000000000000000000000003
+:10AD500000000000000000000000000000000000F3
+:10AD600000000000000000000000000000000000E3
+:10AD700000000000000000000000000000000000D3
+:10AD800000000000000000000000000000000000C3
+:10AD900000000000000000000000000000000000B3
+:10ADA00000000000000000000000000000000000A3
+:10ADB0000000000000000000000000000000000093
+:10ADC0000000000000000000000000000000000083
+:10ADD0000000000000000000000000000000000073
+:10ADE0000000000000000000000000000000000063
+:10ADF0000000000000000000000000000000000053
+:10AE00000000000000000000000000000000000042
+:10AE10000000000000000000000000000000000032
+:10AE20000000000000000000000000000000000022
+:10AE30000000000000000000000000000000000012
+:10AE40000000000000000000000000000000000002
+:10AE500000000000000000000000000000000000F2
+:10AE600000000000000000000000000000000000E2
+:10AE700000000000000000000000000000000000D2
+:10AE800000000000000000000000000000000000C2
+:10AE900000000000000000000000000000000000B2
+:10AEA00000000000000000000000000000000000A2
+:10AEB0000000000000000000000000000000000092
+:10AEC0000000000000000000000000000000000082
+:10AED0000000000000000000000000000000000072
+:10AEE0000000000000000000000000000000000062
+:10AEF0000000000000000000000000000000000052
+:10AF00000000000000000000000000000000000041
+:10AF10000000000000000000000000000000000031
+:10AF20000000000000000000000000000000000021
+:10AF30000000000000000000000000000000000011
+:10AF40000000000000000000000000000000000001
+:10AF500000000000000000000000000000000000F1
+:10AF600000000000000000000000000000000000E1
+:10AF700000000000000000000000000000000000D1
+:10AF800000000000000000000000000000000000C1
+:10AF900000000000000000000000000000000000B1
+:10AFA00000000000000000000000000000000000A1
+:10AFB0000000000000000000000000000000000091
+:10AFC0000000000000000000000000000000000081
+:10AFD0000000000000000000000000000000000071
+:10AFE0000000000000000000000000000000000061
+:10AFF0000000000000000000000000000000000051
+:10B000000000000000000000000000000000000040
+:10B010000000000000000000000000000000000030
+:10B020000000000000000000000000000000000020
+:10B030000000000000000000000000000000000010
+:10B040000000000000000000000000000000000000
+:10B0500000000000000000000000000000000000F0
+:10B0600000000000000000000000000000000000E0
+:10B0700000000000000000000000000000000000D0
+:10B0800000000000000000000000000000000000C0
+:10B0900000000000000000000000000000000000B0
+:10B0A00000000000000000000000000000000000A0
+:10B0B0000000000000000000000000000000000090
+:10B0C0000000000000000000000000000000000080
+:10B0D0000000000000000000000000000000000070
+:10B0E0000000000000000000000000000000000060
+:10B0F0000000000000000000000000000000000050
+:10B10000000000000000000000000000000000003F
+:10B11000000000000000000000000000000000002F
+:10B12000000000000000000000000000000000001F
+:10B13000000000000000000000000000000000000F
+:10B1400000000000000000000000000000000000FF
+:10B1500000000000000000000000000000000000EF
+:10B1600000000000000000000000000000000000DF
+:10B1700000000000000000000000000000000000CF
+:10B1800000000000000000000000000000000000BF
+:10B1900000000000000000000000000000000000AF
+:10B1A000000000000000000000000000000000009F
+:10B1B000000000000000000000000000000000008F
+:10B1C000000000000000000000000000000000007F
+:10B1D000000000000000000000000000000000006F
+:10B1E000000000000000000000000000000000005F
+:10B1F000000000000000000000000000000000004F
+:10B20000000000000000000000000000000000003E
+:10B21000000000000000000000000000000000002E
+:10B22000000000000000000000000000000000001E
+:10B23000000000000000000000000000000000000E
+:10B2400000000000000000000000000000000000FE
+:10B2500000000000000000000000000000000000EE
+:10B2600000000000000000000000000000000000DE
+:10B2700000000000000000000000000000000000CE
+:10B2800000000000000000000000000000000000BE
+:10B2900000000000000000000000000000000000AE
+:10B2A000000000000000000000000000000000009E
+:10B2B000000000000000000000000000000000008E
+:10B2C000000000000000000000000000000000007E
+:10B2D000000000000000000000000000000000006E
+:10B2E000000000000000000000000000000000005E
+:10B2F000000000000000000000000000000000004E
+:10B30000000000000000000000000000000000003D
+:10B31000000000000000000000000000000000002D
+:10B32000000000000000000000000000000000001D
+:10B33000000000000000000000000000000000000D
+:10B3400000000000000000000000000000000000FD
+:10B3500000000000000000000000000000000000ED
+:10B3600000000000000000000000000000000000DD
+:10B3700000000000000000000000000000000000CD
+:10B3800000000000000000000000000000000000BD
+:10B3900000000000000000000000000000000000AD
+:10B3A000000000000000000000000000000000009D
+:10B3B000000000000000000000000000000000008D
+:10B3C000000000000000000000000000000000007D
+:10B3D000000000000000000000000000000000006D
+:10B3E000000000000000000000000000000000005D
+:10B3F000000000000000000000000000000000004D
+:10B40000000000000000000000000000000000003C
+:10B41000000000000000000000000000000000002C
+:10B42000000000000000000000000000000000001C
+:10B43000000000000000000000000000000000000C
+:10B4400000000000000000000000000000000000FC
+:10B4500000000000000000000000000000000000EC
+:10B4600000000000000000000000000000000000DC
+:10B4700000000000000000000000000000000000CC
+:10B4800000000000000000000000000000000000BC
+:10B4900000000000000000000000000000000000AC
+:10B4A000000000000000000000000000000000009C
+:10B4B000000000000000000000000000000000008C
+:10B4C000000000000000000000000000000000007C
+:10B4D000000000000000000000000000000000006C
+:10B4E000000000000000000000000000000000005C
+:10B4F000000000000000000000000000000000004C
+:10B50000000000000000000000000000000000003B
+:10B51000000000000000000000000000000000002B
+:10B52000000000000000000000000000000000001B
+:10B53000000000000000000000000000000000000B
+:10B5400000000000000000000000000000000000FB
+:10B5500000000000000000000000000000000000EB
+:10B5600000000000000000000000000000000000DB
+:10B5700000000000000000000000000000000000CB
+:10B5800000000000000000000000000000000000BB
+:10B5900000000000000000000000000000000000AB
+:10B5A000000000000000000000000000000000009B
+:10B5B000000000000000000000000000000000008B
+:10B5C000000000000000000000000000000000007B
+:10B5D000000000000000000000000000000000006B
+:10B5E000000000000000000000000000000000005B
+:10B5F000000000000000000000000000000000004B
+:10B60000000000000000000000000000000000003A
+:10B61000000000000000000000000000000000002A
+:10B62000000000000000000000000000000000001A
+:10B63000000000000000000000000000000000000A
+:10B6400000000000000000000000000000000000FA
+:10B6500000000000000000000000000000000000EA
+:10B6600000000000000000000000000000000000DA
+:10B6700000000000000000000000000000000000CA
+:10B6800000000000000000000000000000000000BA
+:10B6900000000000000000000000000000000000AA
+:10B6A000000000000000000000000000000000009A
+:10B6B000000000000000000000000000000000008A
+:10B6C000000000000000000000000000000000007A
+:10B6D000000000000000000000000000000000006A
+:10B6E000000000000000000000000000000000005A
+:10B6F000000000000000000000000000000000004A
+:10B700000000000000000000000000000000000039
+:10B710000000000000000000000000000000000029
+:10B720000000000000000000000000000000000019
+:10B730000000000000000000000000000000000009
+:10B7400000000000000000000000000000000000F9
+:10B7500000000000000000000000000000000000E9
+:10B7600000000000000000000000000000000000D9
+:10B7700000000000000000000000000000000000C9
+:10B7800000000000000000000000000000000000B9
+:10B7900000000000000000000000000000000000A9
+:10B7A0000000000000000000000000000000000099
+:10B7B0000000000000000000000000000000000089
+:10B7C0000000000000000000000000000000000079
+:10B7D0000000000000000000000000000000000069
+:10B7E0000000000000000000000000000000000059
+:10B7F0000000000000000000000000000000000049
+:10B800000000000000000000000000000000000038
+:10B810000000000000000000000000000000000028
+:10B820000000000000000000000000000000000018
+:10B830000000000000000000000000000000000008
+:10B8400000000000000000000000000000000000F8
+:10B8500000000000000000000000000000000000E8
+:10B8600000000000000000000000000000000000D8
+:10B8700000000000000000000000000000000000C8
+:10B8800000000000000000000000000000000000B8
+:10B8900000000000000000000000000000000000A8
+:10B8A0000000000000000000000000000000000098
+:10B8B0000000000000000000000000000000000088
+:10B8C0000000000000000000000000000000000078
+:10B8D0000000000000000000000000000000000068
+:10B8E0000000000000000000000000000000000058
+:10B8F0000000000000000000000000000000000048
+:10B900000000000000000000000000000000000037
+:10B910000000000000000000000000000000000027
+:10B920000000000000000000000000000000000017
+:10B930000000000000000000000000000000000007
+:10B9400000000000000000000000000000000000F7
+:10B9500000000000000000000000000000000000E7
+:10B9600000000000000000000000000000000000D7
+:10B9700000000000000000000000000000000000C7
+:10B9800000000000000000000000000000000000B7
+:10B9900000000000000000000000000000000000A7
+:10B9A0000000000000000000000000000000000097
+:10B9B0000000000000000000000000000000000087
+:10B9C0000000000000000000000000000000000077
+:10B9D0000000000000000000000000000000000067
+:10B9E0000000000000000000000000000000000057
+:10B9F0000000000000000000000000000000000047
+:10BA00000000000000000000000000000000000036
+:10BA10000000000000000000000000000000000026
+:10BA20000000000000000000000000000000000016
+:10BA30000000000000000000000000000000000006
+:10BA400000000000000000000000000000000000F6
+:10BA500000000000000000000000000000000000E6
+:10BA600000000000000000000000000000000000D6
+:10BA700000000000000000000000000000000000C6
+:10BA800000000000000000000000000000000000B6
+:10BA900000000000000000000000000000000000A6
+:10BAA0000000000000000000000000000000000096
+:10BAB0000000000000000000000000000000000086
+:10BAC0000000000000000000000000000000000076
+:10BAD0000000000000000000000000000000000066
+:10BAE0000000000000000000000000000000000056
+:10BAF0000000000000000000000000000000000046
+:10BB00000000000000000000000000000000000035
+:10BB10000000000000000000000000000000000025
+:10BB20000000000000000000000000000000000015
+:10BB30000000000000000000000000000000000005
+:10BB400000000000000000000000000000000000F5
+:10BB500000000000000000000000000000000000E5
+:10BB600000000000000000000000000000000000D5
+:10BB700000000000000000000000000000000000C5
+:10BB800000000000000000000000000000000000B5
+:10BB900000000000000000000000000000000000A5
+:10BBA0000000000000000000000000000000000095
+:10BBB0000000000000000000000000000000000085
+:10BBC0000000000000000000000000000000000075
+:10BBD0000000000000000000000000000000000065
+:10BBE0000000000000000000000000000000000055
+:10BBF0000000000000000000000000000000000045
+:10BC00000000000000000000000000000000000034
+:10BC10000000000000000000000000000000000024
+:10BC20000000000000000000000000000000000014
+:10BC30000000000000000000000000000000000004
+:10BC400000000000000000000000000000000000F4
+:10BC500000000000000000000000000000000000E4
+:10BC600000000000000000000000000000000000D4
+:10BC700000000000000000000000000000000000C4
+:10BC800000000000000000000000000000000000B4
+:10BC900000000000000000000000000000000000A4
+:10BCA0000000000000000000000000000000000094
+:10BCB0000000000000000000000000000000000084
+:10BCC0000000000000000000000000000000000074
+:10BCD0000000000000000000000000000000000064
+:10BCE0000000000000000000000000000000000054
+:10BCF0000000000000000000000000000000000044
+:10BD00000000000000000000000000000000000033
+:10BD10000000000000000000000000000000000023
+:10BD20000000000000000000000000000000000013
+:10BD30000000000000000000000000000000000003
+:10BD400000000000000000000000000000000000F3
+:10BD500000000000000000000000000000000000E3
+:10BD600000000000000000000000000000000000D3
+:10BD700000000000000000000000000000000000C3
+:10BD800000000000000000000000000000000000B3
+:10BD900000000000000000000000000000000000A3
+:10BDA0000000000000000000000000000000000093
+:10BDB0000000000000000000000000000000000083
+:10BDC0000000000000000000000000000000000073
+:10BDD0000000000000000000000000000000000063
+:10BDE0000000000000000000000000000000000053
+:10BDF0000000000000000000000000000000000043
+:10BE00000000000000000000000000000000000032
+:10BE10000000000000000000000000000000000022
+:10BE20000000000000000000000000000000000012
+:10BE30000000000000000000000000000000000002
+:10BE400000000000000000000000000000000000F2
+:10BE500000000000000000000000000000000000E2
+:10BE600000000000000000000000000000000000D2
+:10BE700000000000000000000000000000000000C2
+:10BE800000000000000000000000000000000000B2
+:10BE900000000000000000000000000000000000A2
+:10BEA0000000000000000000000000000000000092
+:10BEB0000000000000000000000000000000000082
+:10BEC0000000000000000000000000000000000072
+:10BED0000000000000000000000000000000000062
+:10BEE0000000000000000000000000000000000052
+:10BEF0000000000000000000000000000000000042
+:10BF00000000000000000000000000000000000031
+:10BF10000000000000000000000000000000000021
+:10BF20000000000000000000000000000000000011
+:10BF30000000000000000000000000000000000001
+:10BF400000000000000000000000000000000000F1
+:10BF500000000000000000000000000000000000E1
+:10BF600000000000000000000000000000000000D1
+:10BF700000000000000000000000000000000000C1
+:10BF800000000000000000000000000000000000B1
+:10BF900000000000000000000000000000000000A1
+:10BFA0000000000000000000000000000000000091
+:10BFB0000000000000000000000000000000000081
+:10BFC0000000000000000000000000000000000071
+:10BFD0000000000000000000000000000000000061
+:10BFE0000000000000000000000000000000000051
+:10BFF0000000000000000000000000000000000041
+:10C000000000000000000000000000000000000030
+:10C010000000000000000000000000000000000020
+:10C020000000000000000000000000000000000010
+:10C030000000000000000000000000000000000000
+:10C0400000000000000000000000000000000000F0
+:10C0500000000000000000000000000000000000E0
+:10C0600000000000000000000000000000000000D0
+:10C0700000000000000000000000000000000000C0
+:10C0800000000000000000000000000000000000B0
+:10C0900000000000000000000000000000000000A0
+:10C0A0000000000000000000000000000000000090
+:10C0B0000000000000000000000000000000000080
+:10C0C0000000000000000000000000000000000070
+:10C0D0000000000000000000000000000000000060
+:10C0E0000000000000000000000000000000000050
+:10C0F0000000000000000000000000000000000040
+:10C10000000000000000000000000000000000002F
+:10C11000000000000000000000000000000000001F
+:10C12000000000000000000000000000000000000F
+:10C1300000000000000000000000000000000000FF
+:10C1400000000000000000000000000000000000EF
+:10C1500000000000000000000000000000000000DF
+:10C1600000000000000000000000000000000000CF
+:10C1700000000000000000000000000000000000BF
+:10C1800000000000000000000000000000000000AF
+:10C19000000000000000000000000000000000009F
+:10C1A000000000000000000000000000000000008F
+:10C1B000000000000000000000000000000000007F
+:10C1C000000000000000000000000000000000006F
+:10C1D000000000000000000000000000000000005F
+:10C1E000000000000000000000000000000000004F
+:10C1F000000000000000000000000000000000003F
+:10C20000000000000000000000000000000000002E
+:10C21000000000000000000000000000000000001E
+:10C22000000000000000000000000000000000000E
+:10C2300000000000000000000000000000000000FE
+:10C2400000000000000000000000000000000000EE
+:10C2500000000000000000000000000000000000DE
+:10C2600000000000000000000000000000000000CE
+:10C2700000000000000000000000000000000000BE
+:10C2800000000000000000000000000000000000AE
+:10C29000000000000000000000000000000000009E
+:10C2A000000000000000000000000000000000008E
+:10C2B000000000000000000000000000000000007E
+:10C2C000000000000000000000000000000000006E
+:10C2D000000000000000000000000000000000005E
+:10C2E000000000000000000000000000000000004E
+:10C2F000000000000000000000000000000000003E
+:10C30000000000000000000000000000000000002D
+:10C31000000000000000000000000000000000001D
+:10C32000000000000000000000000000000000000D
+:10C3300000000000000000000000000000000000FD
+:10C3400000000000000000000000000000000000ED
+:10C3500000000000000000000000000000000000DD
+:10C3600000000000000000000000000000000000CD
+:10C3700000000000000000000000000000000000BD
+:10C3800000000000000000000000000000000000AD
+:10C39000000000000000000000000000000000009D
+:10C3A000000000000000000000000000000000008D
+:10C3B000000000000000000000000000000000007D
+:10C3C000000000000000000000000000000000006D
+:10C3D000000000000000000000000000000000005D
+:10C3E000000000000000000000000000000000004D
+:10C3F000000000000000000000000000000000003D
+:10C40000000000000000000000000000000000002C
+:10C41000000000000000000000000000000000001C
+:10C42000000000000000000000000000000000000C
+:10C4300000000000000000000000000000000000FC
+:10C4400000000000000000000000000000000000EC
+:10C4500000000000000000000000000000000000DC
+:10C4600000000000000000000000000000000000CC
+:10C4700000000000000000000000000000000000BC
+:10C4800000000000000000000000000000000000AC
+:10C49000000000000000000000000000000000009C
+:10C4A000000000000000000000000000000000008C
+:10C4B000000000000000000000000000000000007C
+:10C4C000000000000000000000000000000000006C
+:10C4D000000000000000000000000000000000005C
+:10C4E000000000000000000000000000000000004C
+:10C4F000000000000000000000000000000000003C
+:10C50000000000000000000000000000000000002B
+:10C51000000000000000000000000000000000001B
+:10C52000000000000000000000000000000000000B
+:10C5300000000000000000000000000000000000FB
+:10C5400000000000000000000000000000000000EB
+:10C5500000000000000000000000000000000000DB
+:10C5600000000000000000000000000000000000CB
+:10C5700000000000000000000000000000000000BB
+:10C5800000000000000000000000000000000000AB
+:10C59000000000000000000000000000000000009B
+:10C5A000000000000000000000000000000000008B
+:10C5B000000000000000000000000000000000007B
+:10C5C000000000000000000000000000000000006B
+:10C5D000000000000000000000000000000000005B
+:10C5E000000000000000000000000000000000004B
+:10C5F000000000000000000000000000000000003B
+:10C60000000000000000000000000000000000002A
+:10C61000000000000000000000000000000000001A
+:10C62000000000000000000000000000000000000A
+:10C6300000000000000000000000000000000000FA
+:10C6400000000000000000000000000000000000EA
+:10C6500000000000000000000000000000000000DA
+:10C6600000000000000000000000000000000000CA
+:10C6700000000000000000000000000000000000BA
+:10C6800000000000000000000000000000000000AA
+:10C69000000000000000000000000000000000009A
+:10C6A000000000000000000000000000000000008A
+:10C6B000000000000000000000000000000000007A
+:10C6C000000000000000000000000000000000006A
+:10C6D000000000000000000000000000000000005A
+:10C6E000000000000000000000000000000000004A
+:10C6F000000000000000000000000000000000003A
+:10C700000000000000000000000000000000000029
+:10C710000000000000000000000000000000000019
+:10C720000000000000000000000000000000000009
+:10C7300000000000000000000000000000000000F9
+:10C7400000000000000000000000000000000000E9
+:10C7500000000000000000000000000000000000D9
+:10C7600000000000000000000000000000000000C9
+:10C7700000000000000000000000000000000000B9
+:10C7800000000000000000000000000000000000A9
+:10C790000000000000000000000000000000000099
+:10C7A0000000000000000000000000000000000089
+:10C7B0000000000000000000000000000000000079
+:10C7C0000000000000000000000000000000000069
+:10C7D0000000000000000000000000000000000059
+:10C7E0000000000000000000000000000000000049
+:10C7F0000000000000000000000000000000000039
+:10C800000000000000000000000000000000000028
+:10C810000000000000000000000000000000000018
+:10C820000000000000000000000000000000000008
+:10C8300000000000000000000000000000000000F8
+:10C8400000000000000000000000000000000000E8
+:10C8500000000000000000000000000000000000D8
+:10C8600000000000000000000000000000000000C8
+:10C8700000000000000000000000000000000000B8
+:10C8800000000000000000000000000000000000A8
+:10C890000000000000000000000000000000000098
+:10C8A0000000000000000000000000000000000088
+:10C8B0000000000000000000000000000000000078
+:10C8C0000000000000000000000000000000000068
+:10C8D0000000000000000000000000000000000058
+:10C8E0000000000000000000000000000000000048
+:10C8F0000000000000000000000000000000000038
+:10C900000000000000000000000000000000000027
+:10C910000000000000000000000000000000000017
+:10C920000000000000000000000000000000000007
+:10C9300000000000000000000000000000000000F7
+:10C9400000000000000000000000000000000000E7
+:10C9500000000000000000000000000000000000D7
+:10C9600000000000000000000000000000000000C7
+:10C9700000000000000000000000000000000000B7
+:10C9800000000000000000000000000000000000A7
+:10C990000000000000000000000000000000000097
+:10C9A0000000000000000000000000000000000087
+:10C9B0000000000000000000000000000000000077
+:10C9C0000000000000000000000000000000000067
+:10C9D0000000000000000000000000000000000057
+:10C9E0000000000000000000000000000000000047
+:10C9F0000000000000000000000000000000000037
+:10CA00000000000000000000000000000000000026
+:10CA10000000000000000000000000000000000016
+:10CA20000000000000000000000000000000000006
+:10CA300000000000000000000000000000000000F6
+:10CA400000000000000000000000000000000000E6
+:10CA500000000000000000000000000000000000D6
+:10CA600000000000000000000000000000000000C6
+:10CA700000000000000000000000000000000000B6
+:10CA800000000000000000000000000000000000A6
+:10CA90000000000000000000000000000000000096
+:10CAA0000000000000000000000000000000000086
+:10CAB0000000000000000000000000000000000076
+:10CAC0000000000000000000000000000000000066
+:10CAD0000000000000000000000000000000000056
+:10CAE0000000000000000000000000000000000046
+:10CAF0000000000000000000000000000000000036
+:10CB00000000000000000000000000000000000025
+:10CB10000000000000000000000000000000000015
+:10CB20000000000000000000000000000000000005
+:10CB300000000000000000000000000000000000F5
+:10CB400000000000000000000000000000000000E5
+:10CB500000000000000000000000000000000000D5
+:10CB600000000000000000000000000000000000C5
+:10CB700000000000000000000000000000000000B5
+:10CB800000000000000000000000000000000000A5
+:10CB90000000000000000000000000000000000095
+:10CBA0000000000000000000000000000000000085
+:10CBB0000000000000000000000000000000000075
+:10CBC0000000000000000000000000000000000065
+:10CBD0000000000000000000000000000000000055
+:10CBE0000000000000000000000000000000000045
+:10CBF0000000000000000000000000000000000035
+:10CC00000000000000000000000000000000000024
+:10CC10000000000000000000000000000000000014
+:10CC20000000000000000000000000000000000004
+:10CC300000000000000000000000000000000000F4
+:10CC400000000000000000000000000000000000E4
+:10CC500000000000000000000000000000000000D4
+:10CC600000000000000000000000000000000000C4
+:10CC700000000000000000000000000000000000B4
+:10CC800000000000000000000000000000000000A4
+:10CC90000000000000000000000000000000000094
+:10CCA0000000000000000000000000000000000084
+:10CCB0000000000000000000000000000000000074
+:10CCC0000000000000000000000000000000000064
+:10CCD0000000000000000000000000000000000054
+:10CCE0000000000000000000000000000000000044
+:10CCF0000000000000000000000000000000000034
+:10CD00000000000000000000000000000000000023
+:10CD10000000000000000000000000000000000013
+:10CD20000000000000000000000000000000000003
+:10CD300000000000000000000000000000000000F3
+:10CD400000000000000000000000000000000000E3
+:10CD500000000000000000000000000000000000D3
+:10CD600000000000000000000000000000000000C3
+:10CD700000000000000000000000000000000000B3
+:10CD800000000000000000000000000000000000A3
+:10CD90000000000000000000000000000000000093
+:10CDA0000000000000000000000000000000000083
+:10CDB0000000000000000000000000000000000073
+:10CDC0000000000000000000000000000000000063
+:10CDD0000000000000000000000000000000000053
+:10CDE0000000000000000000000000000000000043
+:10CDF0000000000000000000000000000000000033
+:10CE00000000000000000000000000000000000022
+:10CE10000000000000000000000000000000000012
+:10CE20000000000000000000000000000000000002
+:10CE300000000000000000000000000000000000F2
+:10CE400000000000000000000000000000000000E2
+:10CE500000000000000000000000000000000000D2
+:10CE600000000000000000000000000000000000C2
+:10CE700000000000000000000000000000000000B2
+:10CE800000000000000000000000000000000000A2
+:10CE90000000000000000000000000000000000092
+:10CEA0000000000000000000000000000000000082
+:10CEB0000000000000000000000000000000000072
+:10CEC0000000000000000000000000000000000062
+:10CED0000000000000000000000000000000000052
+:10CEE0000000000000000000000000000000000042
+:10CEF0000000000000000000000000000000000032
+:10CF00000000000000000000000000000000000021
+:10CF10000000000000000000000000000000000011
+:10CF20000000000000000000000000000000000001
+:10CF300000000000000000000000000000000000F1
+:10CF400000000000000000000000000000000000E1
+:10CF500000000000000000000000000000000000D1
+:10CF600000000000000000000000000000000000C1
+:10CF700000000000000000000000000000000000B1
+:10CF800000000000000000000000000000000000A1
+:10CF90000000000000000000000000000000000091
+:10CFA0000000000000000000000000000000000081
+:10CFB0000000000000000000000000000000000071
+:10CFC0000000000000000000000000000000000061
+:10CFD0000000000000000000000000000000000051
+:10CFE0000000000000000000000000000000000041
+:10CFF0000000000000000000000000000000000031
+:10D000000000000000000000000000000000000020
+:10D010000000000000000000000000000000000010
+:10D020000000000000000000000000000000000000
+:10D0300000000000000000000000000000000000F0
+:10D0400000000000000000000000000000000000E0
+:10D0500000000000000000000000000000000000D0
+:10D0600000000000000000000000000000000000C0
+:10D0700000000000000000000000000000000000B0
+:10D0800000000000000000000000000000000000A0
+:10D090000000000000000000000000000000000090
+:10D0A0000000000000000000000000000000000080
+:10D0B0000000000000000000000000000000000070
+:10D0C0000000000000000000000000000000000060
+:10D0D0000000000000000000000000000000000050
+:10D0E0000000000000000000000000000000000040
+:10D0F0000000000000000000000000000000000030
+:10D10000000000000000000000000000000000001F
+:10D11000000000000000000000000000000000000F
+:10D1200000000000000000000000000000000000FF
+:10D1300000000000000000000000000000000000EF
+:10D1400000000000000000000000000000000000DF
+:10D1500000000000000000000000000000000000CF
+:10D1600000000000000000000000000000000000BF
+:10D1700000000000000000000000000000000000AF
+:10D18000000000000000000000000000000000009F
+:10D19000000000000000000000000000000000008F
+:10D1A000000000000000000000000000000000007F
+:10D1B000000000000000000000000000000000006F
+:10D1C000000000000000000000000000000000005F
+:10D1D000000000000000000000000000000000004F
+:10D1E000000000000000000000000000000000003F
+:10D1F000000000000000000000000000000000002F
+:10D20000000000000000000000000000000000001E
+:10D21000000000000000000000000000000000000E
+:10D2200000000000000000000000000000000000FE
+:10D2300000000000000000000000000000000000EE
+:10D2400000000000000000000000000000000000DE
+:10D2500000000000000000000000000000000000CE
+:10D2600000000000000000000000000000000000BE
+:10D2700000000000000000000000000000000000AE
+:10D28000000000000000000000000000000000009E
+:10D29000000000000000000000000000000000008E
+:10D2A000000000000000000000000000000000007E
+:10D2B000000000000000000000000000000000006E
+:10D2C000000000000000000000000000000000005E
+:10D2D000000000000000000000000000000000004E
+:10D2E000000000000000000000000000000000003E
+:10D2F000000000000000000000000000000000002E
+:10D30000000000000000000000000000000000001D
+:10D31000000000000000000000000000000000000D
+:10D3200000000000000000000000000000000000FD
+:10D3300000000000000000000000000000000000ED
+:10D3400000000000000000000000000000000000DD
+:10D3500000000000000000000000000000000000CD
+:10D3600000000000000000000000000000000000BD
+:10D3700000000000000000000000000000000000AD
+:10D38000000000000000000000000000000000009D
+:10D39000000000000000000000000000000000008D
+:10D3A000000000000000000000000000000000007D
+:10D3B000000000000000000000000000000000006D
+:10D3C000000000000000000000000000000000005D
+:10D3D000000000000000000000000000000000004D
+:10D3E000000000000000000000000000000000003D
+:10D3F000000000000000000000000000000000002D
+:10D40000000000000000000000000000000000001C
+:10D41000000000000000000000000000000000000C
+:10D4200000000000000000000000000000000000FC
+:10D4300000000000000000000000000000000000EC
+:10D4400000000000000000000000000000000000DC
+:10D4500000000000000000000000000000000000CC
+:10D4600000000000000000000000000000000000BC
+:10D4700000000000000000000000000000000000AC
+:10D48000000000000000000000000000000000009C
+:10D49000000000000000000000000000000000008C
+:10D4A000000000000000000000000000000000007C
+:10D4B000000000000000000000000000000000006C
+:10D4C000000000000000000000000000000000005C
+:10D4D000000000000000000000000000000000004C
+:10D4E000000000000000000000000000000000003C
+:10D4F000000000000000000000000000000000002C
+:10D50000000000000000000000000000000000001B
+:10D51000000000000000000000000000000000000B
+:10D5200000000000000000000000000000000000FB
+:10D5300000000000000000000000000000000000EB
+:10D5400000000000000000000000000000000000DB
+:10D5500000000000000000000000000000000000CB
+:10D5600000000000000000000000000000000000BB
+:10D5700000000000000000000000000000000000AB
+:10D58000000000000000000000000000000000009B
+:10D59000000000000000000000000000000000008B
+:10D5A000000000000000000000000000000000007B
+:10D5B000000000000000000000000000000000006B
+:10D5C000000000000000000000000000000000005B
+:10D5D000000000000000000000000000000000004B
+:10D5E000000000000000000000000000000000003B
+:10D5F000000000000000000000000000000000002B
+:10D60000000000000000000000000000000000001A
+:10D61000000000000000000000000000000000000A
+:10D6200000000000000000000000000000000000FA
+:10D6300000000000000000000000000000000000EA
+:10D6400000000000000000000000000000000000DA
+:10D6500000000000000000000000000000000000CA
+:10D6600000000000000000000000000000000000BA
+:10D6700000000000000000000000000000000000AA
+:10D68000000000000000000000000000000000009A
+:10D69000000000000000000000000000000000008A
+:10D6A000000000000000000000000000000000007A
+:10D6B000000000000000000000000000000000006A
+:10D6C000000000000000000000000000000000005A
+:10D6D000000000000000000000000000000000004A
+:10D6E000000000000000000000000000000000003A
+:10D6F000000000000000000000000000000000002A
+:10D700000000000000000000000000000000000019
+:10D710000000000000000000000000000000000009
+:10D7200000000000000000000000000000000000F9
+:10D7300000000000000000000000000000000000E9
+:10D7400000000000000000000000000000000000D9
+:10D7500000000000000000000000000000000000C9
+:10D7600000000000000000000000000000000000B9
+:10D7700000000000000000000000000000000000A9
+:10D780000000000000000000000000000000000099
+:10D790000000000000000000000000000000000089
+:10D7A0000000000000000000000000000000000079
+:10D7B0000000000000000000000000000000000069
+:10D7C0000000000000000000000000000000000059
+:10D7D0000000000000000000000000000000000049
+:10D7E0000000000000000000000000000000000039
+:10D7F0000000000000000000000000000000000029
+:10D800000000000000000000000000000000000018
+:10D810000000000000000000000000000000000008
+:10D8200000000000000000000000000000000000F8
+:10D8300000000000000000000000000000000000E8
+:10D8400000000000000000000000000000000000D8
+:10D8500000000000000000000000000000000000C8
+:10D8600000000000000000000000000000000000B8
+:10D8700000000000000000000000000000000000A8
+:10D880000000000000000000000000000000000098
+:10D890000000000000000000100000030000000075
+:10D8A0000000000D0000000D3C020801244282A08F
+:10D8B0003C03080124638360AC4000000043202B3C
+:10D8C0001480FFFD244200043C1D080037BD9FFC6E
+:10D8D00003A0F0213C100800261031D83C1C0801A0
+:10D8E000279C82A00E0011EA000000000000000D3D
+:10D8F0003C02800030A5FFFF30C600FF34430180AA
+:10D900003C0880008D0901B80520FFFE00000000E2
+:10D91000AC64000024040002A4650008A066000AAC
+:10D92000A064000BAC6700183C03100003E0000883
+:10D93000AD0301B83C0560008CA24FF80440FFFE27
+:10D9400000000000ACA44FC03C0310003C040200E7
+:10D95000ACA44FC403E00008ACA34FF89486000CBD
+:10D9600000A050212488001400062B02000510801E
+:10D97000004448210109182B10600011000000002C
+:10D98000910300002C6400095080000991190001E6
+:10D99000000360803C0D080125AD8154018D5821A4
+:10D9A0008D67000000E000080000000091190001F0
+:10D9B000011940210109302B54C0FFF291030000EE
+:10D9C00003E00008000010210A000CBE2508000139
+:10D9D000910F0001240E000A15EE00400128C82313
+:10D9E0002F38000A1700003D250D00028D58000059
+:10D9F000250F0006370E0100AD4E0000910C00020D
+:10DA000091AB000191A4000291A60003000C2E002E
+:10DA1000000B3C0000A7102500041A000043C82595
+:10DA20000326C025AD580004910E000691ED0001BB
+:10DA300091E7000291E50003000E5E00000D640016
+:10DA4000016C30250007220000C410250045182570
+:10DA50002508000A0A000CBEAD430008910F000122
+:10DA6000250400022408000255E8000101202021BD
+:10DA70000A000CBE00804021910C0001240B000321
+:10DA8000158B0016000000008D580000910E00025A
+:10DA900025080003370D0008A14E00100A000CBE37
+:10DAA000AD4D000091190001240F0004172F000B49
+:10DAB0000000000091070002910400038D43000064
+:10DAC00000072A0000A4102534660004250800047D
+:10DAD000AD42000C0A000CBEAD46000003E0000899
+:10DAE0002402000127BDFFE8AFBF0014AFB0001053
+:10DAF0000E0014FC008080213C04800834850080E6
+:10DB000090A600052403FFFE0200202100C310247C
+:10DB10008FBF00148FB00010A0A200050A001506E8
+:10DB200027BD001827BDFFE8AFB00010AFBF00143D
+:10DB30000E000F4E008080213C06800834C5008016
+:10DB400090A4000024020050308300FF1062000700
+:10DB50003C098000020020218FBF00148FB000100C
+:10DB6000AD2001800A00101027BD00182408010014
+:10DB70003C078000020020218FBF00148FB00010EE
+:10DB8000ACE801800A00101027BD001827BDFF7007
+:10DB90003C088008AFB60080AFB5007CAFB1006C28
+:10DBA000AFBF008CAFBE0088AFB70084AFB40078C1
+:10DBB000AFB30074AFB20070AFB00068350500803D
+:10DBC0003C0780008CF2012890A40009ACE000849E
+:10DBD00090A60005309100FF0000A821000618273C
+:10DBE000306200010000B02114400067AFA0005077
+:10DBF00090A9000024050020312400FF10850016A4
+:10DC0000240A0050108A008C000000003C0C080020
+:10DC10008D8C00DC258B00013C010800AC2B00DC66
+:10DC20000E0015F2000000008FBF008C8FBE008830
+:10DC30008FB700848FB600808FB5007C8FB40078DA
+:10DC40008FB300748FB200708FB1006C8FB000681A
+:10DC500003E0000827BD00900000000D3C1080008C
+:10DC6000AFA00030961F01168E1901043C1E002043
+:10DC700036130C00033EC0240018B82B00173140A7
+:10DC8000AFA600308E0E010433F4FFFF3C0F0040BE
+:10DC90000293802101CF68249213000D11A0004847
+:10DCA00034C40040326200201440000234860080F8
+:10DCB0000080302114C00093AFA600303C058008DE
+:10DCC00034A800809107000830E6004050C00006EC
+:10DCD0003C06800824090004122900A2240A00122C
+:10DCE000122A00293C06800834D401003C17800029
+:10DCF00096EF011A960D000E928E0008326B00040A
+:10DD000031F7FFFF01CD6004AFAC00548E14000466
+:10DD1000116000318E1E000834C300809079000825
+:10DD20003338004017000028000000008C730050BA
+:10DD300002939023064000063C0C80008C7E003449
+:10DD4000029E8023060200838EA200083C0C800005
+:10DD5000AD800044240200018FBF008C8FBE00887C
+:10DD60008FB700848FB600808FB5007C8FB40078A9
+:10DD70008FB300748FB200708FB1006C8FB00068E9
+:10DD800003E0000827BD00900E000D1A00002021BE
+:10DD90008FBF008C8FBE00888FB700848FB6008045
+:10DDA0008FB5007C8FB400788FB300748FB2007091
+:10DDB0008FB1006C8FB0006803E0000827BD0090B1
+:10DDC0000A000D7A00C020210E0016530280202187
+:10DDD0001440FFDF3C0C80003C038008346300806B
+:10DDE0008C6200340282F82307E000170000000074
+:10DDF0003C1508008EB5310026B100013C01080039
+:10DE0000AC3131000E0014FC024020213C0B800894
+:10DE100035700080920A002502402021354200041E
+:10DE20000E001506A20200250E000C9E02402021C5
+:10DE30000A000DA7240200013C15080126B58350F5
+:10DE40000A000D693C1080008C6600300286202399
+:10DE5000188000082409000C3C0808008D083100D7
+:10DE6000327300FC0000B821250700013C010800C6
+:10DE7000AC273100AFA900308C65003000B43823E6
+:10DE800018E000DB02E7502A1540FFDE000000002A
+:10DE900012E7002A02E768230287A02131B7FFFFBB
+:10DEA000326E000211C00034327F00103C14800832
+:10DEB00036900080920F000831F6004052C000CE2C
+:10DEC0008EA20008024020210E0014FC241300182A
+:10DED000A2130009921800052419FFFE0240202118
+:10DEE0000319B8240E001506A217000524040039F2
+:10DEF000000028210E00162E240600180A000DA787
+:10DF00002402000192B6000C3C0480083483008097
+:10DF10008C6700380016AB0036B10081024020212A
+:10DF20003225F0810E000C8D30C600FF3C0C8000C5
+:10DF3000AD8000440A000DA7240200013A6C0001E4
+:10DF4000318B00011560FFAF0287A0210A000DF898
+:10DF5000000000000040F809240400160A000DA784
+:10DF600024020001024020210E0017330200282164
+:10DF70000A000D5C8FBF008C13E0FF743C03800827
+:10DF8000346800808D0400388C66000403C61023BA
+:10DF90001C40FF6F3C0C800003C4282304A2000136
+:10DFA0000080F021AFB40010AFB70014AFA7001885
+:10DFB0003C1F800097E301208D0900309506005C2E
+:10DFC0008FB900548FAC00303062FFFF30D8FFFFB4
+:10DFD0000047702137EF40000338682B01CF5821EC
+:10DFE000018D5025AFAB0020AFA90028AFAA0030AB
+:10DFF000AFA90024AFA0002CAFBE003491070008E9
+:10E0000030E400081480008F020020218EA200045A
+:10E010000040F80927A400108FA900303128000221
+:10E0200055000001327300FE3C048008348C0080EF
+:10E03000918B0008316A0040514000128FA40024E7
+:10E040008C8D000411BE00BE240E00143265000148
+:10E0500010A0000C8FA400242404000C122400D46F
+:10E060002A27000D10E000CE2409000E2408000A23
+:10E0700052280001241600088FA200242444000125
+:10E08000AFA400248FA600143C03800834650080F0
+:10E090000086F8218CB10030ACBF003090B9004E42
+:10E0A0008CAE00303418FFFF0338780401CF6821AC
+:10E0B000ACAD00348FA600308FAC005430CA0008DD
+:10E0C00003CC58211140000CAFAB00588CA40020A9
+:10E0D0008FB000581090009430C600FF92A2000C40
+:10E0E0008FA700340240202100024B003528008019
+:10E0F0000E000C8D3105F0803C0C800835900080BE
+:10E100008E0B003001715023194000702659008099
+:10E110003C1808008F183198241FFF80033F782493
+:10E12000332D007F3C0680003C0E8004331100102C
+:10E13000ACCF00901220003401AE282190A3006BD8
+:10E14000546000323C10800824070001A0A7006B37
+:10E1500094C4007A2486000AA60600123C0D8008AA
+:10E1600035A5008090B10008322C004015800004D5
+:10E170003C038008326E000115C000620000000000
+:10E18000346400808C8F00208FB3005811F3000A94
+:10E19000346301008C7900000299C0231B000077D2
+:10E1A0008FA80058AC880020AC7400002414000133
+:10E1B000AC7E0004AFB4005016C000370000000071
+:10E1C0008FA40050148000300000000012E0000511
+:10E1D000000018218FA900303137000452E0FE9270
+:10E1E00000601021240300010A000D5B0060102173
+:10E1F0000A000DF9000038210040F8092404001736
+:10E200000A000DA7240200013C108008361000808F
+:10E2100024090001024020210E0014FCA60900126E
+:10E220009208002524050001AFA500503502000129
+:10E23000024020210E001506A20200250A000EA9A8
+:10E240003C0D800827A50038AFA800600E000CA880
+:10E25000AFA000381440FF6D8FA800608FA5003874
+:10E2600030B001005200FF6A8EA200048FA3003C70
+:10E270008D070058006720230483FF64AD03005816
+:10E280000A000E558EA200040E000C9E02402021B2
+:10E290000A000EC4000000000E0014FC0240202101
+:10E2A0003C05800834A30080024020210E001506A2
+:10E2B000A076000902C03021240400370E00162E7B
+:10E2C000000028210A000EC28FA400508FA200185F
+:10E2D0005840FFA33C0D80080E0014FC0240202192
+:10E2E000920A0025240B0001AFAB00503542000418
+:10E2F000024020210E001506A20200250A000EA9E8
+:10E300003C0D80088CB600308EBE00082404001836
+:10E3100026D5000103C0F809ACB500308FB200303B
+:10E320000A000D5B324200043C07800094E5011AAC
+:10E3300050A0FF6A34C600100A000E8992A2000C99
+:10E34000122E002A2A2F001511E0001E2419001693
+:10E350002418000C5638FF3E326500013C1F80082F
+:10E3600093E3001B2410FFBD2416000E0070302420
+:10E37000A3E6001B0A000E65326500018C7F0000D9
+:10E3800017F4FF8D000000008C67000403C73023E2
+:10E3900004C1FF848FA800580A000EBF00000000CF
+:10E3A0001629FF368FA200240A000E7024160010D2
+:10E3B0002411000E52D1FF30241600100A000E6FF7
+:10E3C000241600165639FF22326500013C1F8008D2
+:10E3D00093E3001B2410FFBD2416001000703024AE
+:10E3E000A3E6001B0A000E65326500010A000E64F8
+:10E3F000241600123C0380008C6201B80440FFFE2A
+:10E4000024040800AC6401B803E000080000000028
+:10E4100030A5FFFF30C6FFFF3C0780008CE201B84B
+:10E420000440FFFE34E80180AD040000ACE40020AD
+:10E430003C048008948300483063FFFF1060001D97
+:10E440003C0B800024AA0012006A482B5120001ABD
+:10E45000240A000394F901208F890000240C001A7B
+:10E460003338FFFF2707FFFE0067782B39EE0001E6
+:10E4700000096B8201AE5824A10C000B116000470B
+:10E480008F830004A50700148F880004350700015E
+:10E49000AF87000430CC00405580000F3C0880005E
+:10E4A0003C0C800035840180A485000E0A000F9882
+:10E4B0008F8F000C240A00033564018030CC0040AB
+:10E4C0008F8900008F870004A08A000B5180FFF520
+:10E4D0003C0C80003C088000950301203C0880082B
+:10E4E000951800403079FFFF272EFFFE330FFFFF06
+:10E4F00001CF682B11A0000301C02021950200402C
+:10E500003044FFFF3C0B800000A4502335650180A0
+:10E51000A4A4000EA4AA00248F8F000C3C05800048
+:10E5200034AE01802418000230ED8000A5D8000C24
+:10E53000A5C90010ADCF0028A5C6000811A0000E87
+:10E540003C04800094AA01163142FFFC24480004D8
+:10E55000010518218C7940003326FFFF14C0000705
+:10E56000240EBFFF3C0BFFFF35657FFF00E538241D
+:10E57000AF8700043C048000240EBFFF348C018070
+:10E5800000EE6824A58D0026AD89002C3C07100004
+:10E59000AC8701B803E00008000000002402FFFE81
+:10E5A000006238240A000F76AF8700043C05800023
+:10E5B00034A400708C8A000090A601128F840000A1
+:10E5C00027BDFFF030C300FF000318823082010036
+:10E5D00000003821104000392466000330874000D5
+:10E5E00050E0003930882000000610800045C82126
+:10E5F0008F2F40002478000400187080AFAF000017
+:10E6000001C568218DAC4000AFAC000494AB01168D
+:10E610003169FFFC012540218D054000AFA50008B0
+:10E620008FA9000800003021000028213C070800C5
+:10E6300024E701000A000FE92408000890420000C6
+:10E6400024A500012CAD000C0062C8210019C08077
+:10E65000030778218DEE000011A0000600CE3026C1
+:10E6600003A5102114A8FFF500051A005520FFF49A
+:10E67000904200003C048000348700703C05080094
+:10E680008CA531048CE300002CA8002011000009A7
+:10E69000006A3823000558803C0C0800258C31089E
+:10E6A000016C482124AA0001AD2700003C010800AC
+:10E6B000AC2A3104AF86000C2407000100E01021D1
+:10E6C00003E0000827BD00101100FFFC0000382106
+:10E6D00000066080018558218D6440002469000493
+:10E6E00000093880AFA4000000E518218C664000C6
+:10E6F000AFA000080A000FD9AFA6000427BDFFD8BD
+:10E70000AFB20018AFB00010AFBF0024AFB400200C
+:10E71000AFB3001CAFB100148F8700003C04800031
+:10E720009483010E30E24000000080211040001070
+:10E730003072FFFF3C06002000E6282410A0000DE8
+:10E7400030EA80008F8800042409BFFF00E93824E4
+:10E7500035031000AF87000030F120001620000BB9
+:10E760003C1400042418FFBF0A001038007810245D
+:10E7700030EA8000154000863C0C002030F120007B
+:10E780001220FFF88F8300043C14000400F4982446
+:10E790001260FFF52418FFBF3462004030F9010019
+:10E7A0001320000FAF8200043C02002000E2F82496
+:10E7B00013E000053C0B80003C04000400E4182436
+:10E7C000106000CF00000000956A011E9569011CD1
+:10E7D0003146FFFF0009440000C82825AF85000C22
+:10E7E0003C0E800095CD010C8DC44000340CFFFF21
+:10E7F000108C00B031A5FFFF308F010055E0000103
+:10E800002410001030F110005220000836110001D1
+:10E8100030F300201660009F3C18100000F8A02480
+:10E82000168000963C040C003611000130E801000F
+:10E830001500000B3C0A00018F88000431094000DC
+:10E840001520000800EA30243C0C1F0100EC58247D
+:10E850003C0A1000516A00AE30AD02003C0A0001D3
+:10E8600000EA302414C000953C05100000E5202487
+:10E8700000004021108000070000902100079E0248
+:10E880003272000F001278803C0E080125CE830002
+:10E8900001EE40218F94001C12800047022080214D
+:10E8A00010800091000000003C0980009539010EA5
+:10E8B00091030000022030213338FFFF27050004B8
+:10E8C000106000080000A021241F0003107F013AFF
+:10E8D00024040002910C00011184011830EA004068
+:10E8E0000012A1C08F920020524000013626004045
+:10E8F0003C1380008E6F400031F10100122000CBEC
+:10E9000030D1FFFB3C1808008F18002430D20004DF
+:10E910003306000414C000CC30B0FFFF56400001A5
+:10E920003631000402802021020028210E000F55FC
+:10E93000022030211640000D0000202136650180A4
+:10E940003C0480008C9301B80660FFFE241920006F
+:10E9500024140002A4B90008A0B4000BA4A0001065
+:10E960003C051000AC8501B8000020218FBF0024B9
+:10E970008FB400208FB3001C8FB200188FB1001429
+:10E980008FB000100080102103E0000827BD002890
+:10E9900000EC58241160FF7A30F120008F8D0004C4
+:10E9A0003C0FFFFF35EE7FFF00EE382435A38000DB
+:10E9B0000A001027AF8700003C0208008C42003894
+:10E9C0003C040800248400381040004B2449FFFF19
+:10E9D0003C038000946C010E318BFFFF110000A0FE
+:10E9E000257300043C1008008E1000301200000A4D
+:10E9F00030E601008F8A00043143400010600006B9
+:10EA00003C0F0F0000EF70243C0D010001AE402BC5
+:10EA1000110000DF3265FFFF10C000693C140F00D9
+:10EA200000F428243C18020010B800658F99000CEF
+:10EA30003270FFFF03299824026490219249000458
+:10EA400025270004000721C00200282136260002E5
+:10EA50000E000F55000000008FBF00248FB400206F
+:10EA60008FB3001C8FB200188FB100148FB000104C
+:10EA70000000102103E0000827BD00283C020BFF26
+:10EA800000E41824345FFFFF03E3C82B5320FF6723
+:10EA9000361100013C0608008CC6002C361100051A
+:10EAA00024D000013C010800AC30002C0A00105DAD
+:10EAB00030E801000A0010522410002002402821F2
+:10EAC0003C1208008E5200D824040080264D00011C
+:10EAD0003C010800AC2D00D80E000F5524060003A1
+:10EAE0000A0010E88FBF00243C08080125088300B5
+:10EAF0000A00107C3C0980000A0010C50000482173
+:10EB00000E000FBC000000000A0010498F870000B3
+:10EB100015A0FF533C0A00012645000430AAFFFF60
+:10EB2000362600023C0380008C7201B80640FFFECE
+:10EB30008F85000834690180AD20000010A000AF6F
+:10EB40003C048000254F001200AF702B51C000AC78
+:10EB500024030003947801202414001A30F14000AB
+:10EB60003313FFFFA134000B122000B62663FFFE13
+:10EB700000A3C82B572000B4241FFFFE3508000156
+:10EB8000A5230014AF8800043C108000240CBFFFB4
+:10EB9000010C4824240B000236080180A50B000C50
+:10EBA000A50A000EA5060008A5090026A507001065
+:10EBB0003C071000AE0701B80A0010E88FBF002420
+:10EBC0003C0308008C6300D02E45000C001221C0CD
+:10EBD000386B00012D6200010045F82417E0FF9A10
+:10EBE0003270FFFF264CFFFC2D840004548000503F
+:10EBF00000002021386A00022D43000100658024B6
+:10EC00001600004A3270FFFF00076A420012702BA4
+:10EC100001AE40245500006300002021001221C0F5
+:10EC2000020028210A0010E53626000234DF000227
+:10EC30000280202133E6FFFF0E000F5530A5FFFFB5
+:10EC40000A0010AC00002021240401000200282149
+:10EC50000E000F55022030210A001098000000001D
+:10EC60008C66400030CF010011E0003D30F801001B
+:10EC70003C1208008E5200241300001132340004AC
+:10EC80003C1F0F0000FFC8243C0502001325000CA8
+:10EC90008F8C000C022030213265FFFF018958243F
+:10ECA00001641021904900043230FFFB2411FFFE63
+:10ECB000252700040E000F55000721C002519024A3
+:10ECC0002404000112440052324300011460005831
+:10ECD00002003021324A0004114000048F8D0000F0
+:10ECE00031A808001500005A3265FFFF1680FF5B4F
+:10ECF0008FBF00243C138000366501803C048000F7
+:10ED00008C9001B80600FFFE24062000240F0002AC
+:10ED1000A4A60008A0AF000BA4A000103C0E100099
+:10ED2000AC8E01B80A0010E88FBF0024000020213B
+:10ED3000020028210A0010E5362600021140FEE9F3
+:10ED40000000A021952E0110950D000231C8FFFF93
+:10ED500051A8FEE40012A1C00A00108B8F9200207F
+:10ED60003C0508008CA5002430B800015300FF3B8F
+:10ED70008FBF00243265FFFF3626000200002021ED
+:10ED80000E000F55000000000A0010E88FBF00249D
+:10ED9000362600020E000F55240400800A0010E8F9
+:10EDA0008FBF0024020028210E000F553226FFFBE2
+:10EDB0000A001159001221C0910300012402000130
+:10EDC0001062FEEA24040001241000021470FEC543
+:10EDD0000000A02130E300401060FEC38F920020AD
+:10EDE000952B0110950900023167FFFF1127FEE006
+:10EDF0008FBF00240A00108B0000000024030003D2
+:10EE000034820180A043000B0A0011343C108000C2
+:10EE100032140004168000033265FFFF3612000230
+:10EE20003250FFFF020030210A0011B10000202102
+:10EE3000000020210E000F553265FFFF0A001186E9
+:10EE40003210FFFB241FFFFE0A001132011F402475
+:10EE5000020030210E000F55240401000A00118C1D
+:10EE60000000000027BDFFC8AFB00010AFBF0034E6
+:10EE70003C10600CAFBE0030AFB7002CAFB600281E
+:10EE8000AFB50024AFB40020AFB3001CAFB2001880
+:10EE9000AFB100148E0E5000240FFF7F3C0680009F
+:10EEA00001CF682435AC380C240B0003AE0C5000A5
+:10EEB000ACCB00083C010800AC2000200E00175F1E
+:10EEC000000000003C0A001035498051AE09537C17
+:10EED0003C0660168CC700003C0860148D0500A03D
+:10EEE0003C03FFFF00E320243C02535300052FC2E4
+:10EEF0001482000634D07C000005A0800286982190
+:10EF00008E7200043C116000025180218E1E007838
+:10EF10008E17007C3C0260003C05080124A581841A
+:10EF2000344420202406000AAF9E00100E0016086C
+:10EF3000AF9700143C180098260503883C1F00106A
+:10EF40003C19600C371600C03C158000AF3F53FCE5
+:10EF50003C1E080027DE00383C17080126F7830214
+:10EF6000AEB6013CAF8500183C047FFF3488FFFF3C
+:10EF70003C0780000A0012373C0660008CAB0000A2
+:10EF8000316A00011540000235630001ACA30000A6
+:10EF900054800009320500018CF000008CC9180C67
+:10EFA000320400030521FFF501281824ACC3180C16
+:10EFB0000A0012300000000014A000553C1180002F
+:10EFC0003206000210C0FFE88F8500183C04800064
+:10EFD0008C99014024100040AC9900208C98014885
+:10EFE00000187E0231E300701070022C0000000057
+:10EFF0002C67004150E000782404006024110020B8
+:10F00000107100063C1F40003C138000AE7F017869
+:10F01000000000000A00122B8F8500188C93014815
+:10F02000241600043488018000134C02312500FFAF
+:10F030008C83014010B6017324B2FFFA2E4B0006F8
+:10F04000516000133C0580008C86014430A400FF11
+:10F0500030D400FF30C300FF2E85000814A000024A
+:10F060002467000424070003240C0009108C01AC61
+:10F07000288D000A11A001982415000A240E00080A
+:10F08000108E00158F91001C000719C03C058000F0
+:10F090008CA701B804E0FFFE24160002AD030000B7
+:10F0A000A5090008A116000B8CA401483C1F4000D4
+:10F0B0003C138000A50400108CA90144AD09002474
+:10F0C0003C081000ACA801B8AE7F01780000000039
+:10F0D0000A00122B8F8500180006CA020007208044
+:10F0E0003C16080126D683000096C021262F000179
+:10F0F000332500FF24100001A319000014B0FFE223
+:10F10000AF8F001C000719C00A001274AF850020E1
+:10F110008E3301283C0D8008AE3300208E2C010474
+:10F120008E26010095A80048AF8C0000AF86000431
+:10F130003103FFFF0E000F4EAF8300083C070800AD
+:10F140008CE700C010E0002D8F8700003C0F080006
+:10F150008DEF00C425EE00013C010800AC2E00C478
+:10F160003C0480008C9101243C076020ACF1001429
+:10F17000000000003C0680003C164000ACD6013880
+:10F18000000000005260FF8F320600022669014035
+:10F19000266D00802415FF800135602401B57024A0
+:10F1A000000E194031B4007F000C91403128007FDF
+:10F1B0003C05200034A20002007450250248582566
+:10F1C000016298250142F825ACDF0830ACD3083045
+:10F1D0000A001242320600021464FF8B3C1F4000FA
+:10F1E0000E001F793C1380003C1F4000AE7F017869
+:10F1F000000000000A00122B8F8500183C1400103C
+:10F2000000F49024164000A78F8300043C180800E7
+:10F210008F1800209636010E30F5400027110001AE
+:10F220003C010800AC31002032D2FFFF12A000B335
+:10F23000000088213C1F002000FFC824132000B0DC
+:10F2400030E980008F8200042404BFFF00E43824EA
+:10F2500034431000AF87000030E6200010C000A546
+:10F26000240EFFBF3C0D000400ED6024118000025D
+:10F27000006E10243462004030EF010011E0000FF6
+:10F28000AF8200043C15002000F5A0241280000588
+:10F290003C0480003C18000400F8B02412C0012F88
+:10F2A00000000000948A011E9489011C315FFFFF59
+:10F2B0000009140003E2C825AF99000C3C0580004A
+:10F2C00094A3010C8CA44000340BFFFF108B00CBE7
+:10F2D0003065FFFF30880100550000012411001047
+:10F2E00030E6100010C000133635000130EC00206D
+:10F2F0001580000A3C0E100000EE682411A0000DDD
+:10F300003C180C003C160BFF00F8A82436D4FFFF75
+:10F310000295782B11E00007363500013C190800F2
+:10F320008F39002C36350005273100013C010800DB
+:10F33000AC31002C30FF010017E0000B3C0A00014B
+:10F340008F880004310240001440000800EA302495
+:10F350003C041F0100E450243C0910001149010342
+:10F3600030AB02003C0A000100EA302414C00098CF
+:10F370003C03100000E3202400004021108000071F
+:10F380000000A02100076E0231B4000F001460805D
+:10F390003C12080126528300019240218F8E001CEE
+:10F3A00011C0006202A08821148000033C09800083
+:10F3B0003C08080125088300952F010E91030000E9
+:10F3C00002A0302131E4FFFF248500041060000812
+:10F3D0000000B0212416000310760109240A00025F
+:10F3E000910B0001116A002630E300400014B1C007
+:10F3F0008F9200205240000136A600403C1480004D
+:10F400008E8C40003195010012A000BE30D5000462
+:10F410003C0D08008DAD002430D2FFFB31A6000466
+:10F4200014C000F130B1FFFF56A0000136520004B5
+:10F4300002C02021022028210E000F550240302159
+:10F4400016A0000D00002021368401803C058000BC
+:10F450008CAE01B805C0FFFE24162000240F000268
+:10F46000A4960008A08F000BA48000103C0410009C
+:10F47000ACA401B8000020210A00138600801021EE
+:10F480001060FFDB0000B0219527011095090002F4
+:10F4900030E8FFFF5128FFD60014B1C00A00134E18
+:10F4A0008F920020240EBFFF006E682411A0000779
+:10F4B000240F87FF006FA82416A0000A3C190060E3
+:10F4C00000F9C02413000007000000000E000D34F6
+:10F4D000000000001040FF283C0680000A0012AA2D
+:10F4E0003C0480000E0014E5000000000A001386B2
+:10F4F000000000000A0012EF006E102430E98000C6
+:10F500001120FF558F8300043C0B002000EB50249A
+:10F510001140FF518F8500043C08FFFF35037FFF3A
+:10F5200000E338240A0012E634A380003C050800FA
+:10F530008CA5003814A0000224A4FFFF00002021A5
+:10F540003C0380009479010E3338FFFF110000DA8C
+:10F55000271200043C1108008E3100301220000AEE
+:10F5600030E901008F820004305F400013E00006A4
+:10F570003C080F0000E818243C0B01000163502BED
+:10F58000114000C13245FFFF1120002E3C0D0F003D
+:10F5900000ED30243C0C020010CC002A8F96000CA9
+:10F5A0003251FFFF02C4782401FE702191D2000481
+:10F5B00026470004000721C00220282136A60002A9
+:10F5C0000E000F55000000000A00138600001021F5
+:10F5D0003C0B08008D6B00D80240282124040080D9
+:10F5E000256700013C010800AC2700D80E000F552C
+:10F5F000240600030A001386000010210A001309E4
+:10F60000241100208C840140010028213C0380004B
+:10F610008C7F01B807E0FFFE2402001CACA40000B0
+:10F62000A0A2000B3C0A1000AC6A01B83C1F4000CD
+:10F630003C138000AE7F0178000000000A00122B0E
+:10F640008F8500183C0308008C6300D02E85000CC9
+:10F65000001421C0387100012E3900010325C02497
+:10F660001700FFD53251FFFF269FFFFC2FE4000457
+:10F670001480000800002021386B00022D6A000170
+:10F680000145102410400006000742423251FFFF9E
+:10F6900000002021022028210A0013C136A6000202
+:10F6A0000014182B0103282414A000053251FFFF79
+:10F6B000001421C0022028210A0013C136A600022E
+:10F6C00000002021022028210E000F5532A6FFFB4A
+:10F6D0000A0013FE001421C01095005A000768802C
+:10F6E0002406000B1486FE69000719C00007C880B5
+:10F6F0003C11080126318300033130210A001274C5
+:10F70000A0C0000134D4000202C0202130A5FFFFB8
+:10F710000E000F553286FFFF0A00136F00002021F4
+:10F720000007F8803C0A0801254A830003EA1021FB
+:10F73000905300001260FE55000719C0A040000061
+:10F740008F8B001C2562FFFF1440FE50AF82001C0F
+:10F75000000719C00A001274AF8000200E000FBC11
+:10F76000000000000A0013008F8700001560FEFEF5
+:10F770003C0A000126430004306AFFFF36A600025F
+:10F780003C0380008C7201B80640FFFE34690180A2
+:10F790008F850008AD20000010A0008B3C19800070
+:10F7A000254D001200AD602B11800088241100034C
+:10F7B000947501202414001A30EE400032AFFFFF90
+:10F7C000A134000B11C0009125E3FFFE00A3B02B74
+:10F7D00016C0008F2405FFFE35080001A523001484
+:10F7E0000A0014C6AF880004240401000220282166
+:10F7F0000E000F55024030210A00135B000000008C
+:10F8000091030001241400011074FF1B2404000163
+:10F81000241800021478FEF60000B02130F10040F8
+:10F820001220FEF48F92002095220110951F0002F5
+:10F830003059FFFF13F9FF27008010210A00134EF3
+:10F84000000000003C1808012718830001B880213F
+:10F8500000067A02A20F00013C1260008E431820BD
+:10F860002415000100F57004006E282501B7A021C1
+:10F8700000066402000719C0A68C0000AE451820DF
+:10F880000A0012753C05800036A600020E000F55D6
+:10F89000240400800A001386000010210E00150BBE
+:10F8A0003C1380003C1F4000AE7F01780000000048
+:10F8B0000A00122B8F8500188C694000313401003A
+:10F8C0001280003530EC01003C1408008E940024B6
+:10F8D0001180001132B600043C0E0F0000EE6824C7
+:10F8E0003C06020011A6000C02A030218F91000CF2
+:10F8F0003245FFFF0224C824033EC021930F0004B9
+:10F9000032B1FFFB2415FFFE25E700040E000F5562
+:10F91000000721C00295A024240400011284003FA6
+:10F920003282000110400007328A00040220302198
+:10F93000000020210E000F553245FFFF3231FFFB42
+:10F94000328A0004114000048F85000030AB0800AB
+:10F950001560003A3245FFFF16C0FEDE00001021A0
+:10F960003C128000364401803C0580008CA801B820
+:10F970000500FFFE2414200024030002A4940008C4
+:10F98000A083000BA48000103C091000ACA901B8B2
+:10F990000A001386000010213C0608008CC60024D3
+:10F9A00030CC00015180FECB000010213245FFFF1A
+:10F9B00036A60002000020210E000F5500000000B6
+:10F9C0000A0013860000102124110003373801803B
+:10F9D000A311000B3C0580002409BFFF0109F82496
+:10F9E0002402000234A80180A502000CA50A000E22
+:10F9F000A5060008A51F0026A50700103C09100059
+:10FA0000ACA901B80A001386000010212405FFFEEE
+:10FA1000010540240A0014C6AF88000432360004F1
+:10FA200016C000033245FFFF363F000233F1FFFFEF
+:10FA3000022030210A0014BF0000202102203021C2
+:10FA40000E000F55240401000A0014A70000000056
+:10FA50003C0380008C6401003082003E14400008AA
+:10FA600000000000AC6000488C66010030C507C093
+:10FA700010A0000500000000AC60004CAC6000501D
+:10FA800003E0000824020001AC600054AC600040B8
+:10FA90008C6801003107380010E0FFF90000000019
+:10FAA0002402000103E00008AC6000443C03900025
+:10FAB00034620001008220253C038000AC640020F9
+:10FAC0008C65002004A0FFFE0000000003E0000899
+:10FAD000000000003C028000344300010083202528
+:10FAE00003E00008AC44002027BDFFD8AFB10014EC
+:10FAF0003C048000AFBF0020AFB3001CAFB20018C1
+:10FB0000AFB000108C9201408C9001482402000E8E
+:10FB100000108C02322300FF1062005902042824D6
+:10FB20002866000F10C00013286A0037240700065B
+:10FB30001067008E286800075100002D240400097A
+:10FB4000106000783C06800024090001106900B0B4
+:10FB5000000000000000000D8FBF00208FB3001CCC
+:10FB60008FB200188FB100148FB0001003E00008AE
+:10FB700027BD002811400059240D0038286B00359E
+:10FB8000116000053C058000240C001F146CFFF17F
+:10FB9000000000003C0580008CB801B80700FFFEA3
+:10FBA00034B90180AF320000241F0001241200028A
+:10FBB0003C021000AF200004A7310008A33F000A58
+:10FBC000A332000BA7300010AF200024AF20002884
+:10FBD000ACA201B88FBF00208FB3001C8FB20018F9
+:10FBE0008FB100148FB0001003E0000827BD00287B
+:10FBF000106400232405000B1465FFD63218FFFFA4
+:10FC0000170000203C0580008F93FEDC927F0005EA
+:10FC100033F900041720FFCF000000000E0014FC91
+:10FC2000024020219269000502402021352800046D
+:10FC30000E001506A26800059267000530E2000478
+:10FC400014400002000000000000000D926B000054
+:10FC500024060020316A00FF1546000A3C0580009A
+:10FC60008CA401B80480FFFE34AD0180240E000591
+:10FC70003C0C1000ADB20000A1AE000BACAC01B862
+:10FC80003C0580008CA301B80460FFFE34AF018006
+:10FC900024130002ADF20000ADF20004A5F100084B
+:10FCA000A1F3000AA1F3000BA5F00010ADE00024C1
+:10FCB0008CB101443C101000ADF10028ACB001B88B
+:10FCC0008FBF00208FB3001C8FB200188FB10014BB
+:10FCD0008FB0001003E0000827BD0028106DFFADB5
+:10FCE000240E0080146EFF9B000000003C05800085
+:10FCF0008CA301B80460FFFE34AF0180241200021F
+:10FD0000A1F2000BA5F10008A5F000108CB301448E
+:10FD10003C021000A5F30012ACA201B80A0015477E
+:10FD20008FBF00208CC301B80460FFFE34D3018074
+:10FD3000AE720000AE60000424120001A67100083B
+:10FD400024110002A272000AA271000BA67000101A
+:10FD50008CD001443C0F1000AE700024AE6000282F
+:10FD6000ACCF01B80A0015828FBF00203C03800091
+:10FD70008C6601B804C0FFFE346201803C060801B5
+:10FD800090C68340AC52000010C000030000382130
+:10FD90003C0708018CE783483C05800034AA0180B9
+:10FDA0002404000234CC0001AC470004A551000833
+:10FDB000A14C000AA144000BA55000108CAB0144DB
+:10FDC0000000202101402821AD4B002410C0000379
+:10FDD0008FBF00203C0408018C8483448FB3001C37
+:10FDE0008FB200188FB100148FB000103C0E1000BD
+:10FDF0003C0D800027BD0028ACA40028ADAE01B8A2
+:10FE00003C010801A020834003E00008000000003E
+:10FE100010A0000B3C0680008C98014424190002BD
+:10FE20003C010801A03983403C010801AC32834801
+:10FE30003C010801AC3883440A0015828FBF0020C2
+:10FE40008CDF01B807E0FFFE34C7018024090002FF
+:10FE5000ACF20000ACF20004A4F10008A0E9000A32
+:10FE6000A0E9000BA4F00010ACE000248CC8014411
+:10FE70003C021000ACE80028ACC201B80A001582B0
+:10FE80008FBF002027BDFFE8AFBF00100E000F4E50
+:10FE9000000000003C0280008FBF00100000202105
+:10FEA000AC4001800A00101027BD00183084FFFF0D
+:10FEB00030A5FFFF108000070000182130820001EC
+:10FEC0001040000200042042006518211480FFFB4E
+:10FED0000005284003E000080060102110C0000762
+:10FEE000000000008CA2000024C6FFFF24A500042F
+:10FEF000AC82000014C0FFFB2484000403E000086F
+:10FF00000000000010A0000824A3FFFFAC86000042
+:10FF100000000000000000002402FFFF2463FFFF38
+:10FF20001462FFFA2484000403E0000800000000CB
+:10FF300027BDFFE8AFBF0014AFB000100E0014FCE7
+:10FF4000008080213C048008348300809065002577
+:10FF50000200202134A200200E001506A062002518
+:10FF6000020020218FBF00148FB000100A000C9EE9
+:10FF700027BD00183C03800027BDFFF834620180D4
+:10FF8000AFA20000308C00FF30AD00FF30CE00FF8C
+:10FF90003C0B80008D6401B80480FFFE000000006F
+:10FFA0008FA900008D6801288FAA00008FA700008C
+:10FFB0008FA400002405000124020002A085000A8D
+:10FFC0008FA30000359940003C051000A062000B93
+:10FFD0008FB800008FAC00008FA600008FAF00002C
+:10FFE00027BD0008AD280000AD400004AD8000240E
+:10FFF000ACC00028A4F90008A70D0010A5EE00125F
+:020000040001F9
+:1000000003E00008AD6501B83C06800827BDFFE8A5
+:1000100034C50080AFBF001090A700092402001271
+:1000200030E300FF1062000B008030218CA80050EC
+:1000300000882023048000088FBF00108CAA0034A1
+:10004000240400390000282100CA482305200005A7
+:10005000240600128FBF00102402000103E00008F4
+:1000600027BD00180E00162E000000008FBF0010E4
+:100070002402000103E0000827BD001827BDFFC8C7
+:10008000AFB1002C00A08821AFB2003027A500102E
+:100090000080902102202021AFBF0034AFB00028A3
+:1000A0000E000CA8AFA000101440009B3C07800875
+:1000B00034E400809086000830C5000814A0006970
+:1000C0008FA700103C18800837100080920F00089E
+:1000D00031EE000815C00002240800030000402192
+:1000E0003C0B800891650011916A00123566008012
+:1000F0008CDF0054314900FF0128202130A300FF8C
+:10010000000410800062282100BFC82B13200008C3
+:100110000000000094D0005C8CCF0054320DFFFF33
+:1001200001E5702301AE602B1180009400000000F7
+:1001300094D9005C3323FFFF30FF000413E0007408
+:10014000000830808FA8001C0068102B5040004F22
+:1001500030E30004006610232C46008010C000022B
+:1001600000408021241000800E0014FC0240202159
+:100170003C0380083466008024070001ACC7000CF3
+:1001800090C800080010684034670100311F007FEC
+:10019000A0DF00088E39000427380001ACD80030F9
+:1001A000A4D0005C8CCF003C9630000E01F0702192
+:1001B000ACCE00208CCC003C018D5821ACCB001C77
+:1001C0008E2A0004ACEA00008E290008ACE9000485
+:1001D0008FA5001030A400085480003293A60020A0
+:1001E000A0C0004E90C9004E2402FFDF3C188008DA
+:1001F000A0E9000890C50008370D0080240A0050CF
+:1002000000A22024A0C400088E390008ADB900382F
+:100210008F0F00148DB0003001F07021ADAE0034AE
+:1002200091AC0000318B00FF116A002C26450100C3
+:100230000E00150602402021240400380000282169
+:100240000E00162E2406000A8FBF00348FB2003035
+:100250008FB1002C8FB000282402000103E00008B9
+:1002600027BD003830E801001100003D8FA30014C5
+:100270008C8A0058006A48230520FF933C188008A8
+:10028000AC8300580A0016828FA7001024070218BA
+:100290001060FFB100E610238FA2001C0A0016A711
+:1002A000004610233C188008370D0080A0E60008A7
+:1002B0008E390008240A0050ADB900388F0F0014A1
+:1002C0008DB0003001F07021ADAE003491AC000073
+:1002D000318B00FF156AFFD6264501002406FF80FA
+:1002E00000A610243C098000AD2200288E270008BB
+:1002F00030A3007F3C04800C0064F821AFE700D0FD
+:100300008E280008AF9F002C0A0016DDAFE800D44D
+:100310000A0016A42C6202188E2300083C048008F0
+:1003200034820080AC430054024020210E00161D90
+:10033000AC400030240400382405008D0E00162E39
+:10034000240600128FBF00348FB200308FB1002C12
+:100350008FB000282402000103E0000827BD003808
+:10036000AC800058908C0008240DFFF7018D5824B4
+:10037000A08B00080A0016828FA700108CD80054AA
+:100380000A00169F0305182327BDFFE8AFBF001022
+:1003900090A6000D30C7001010E0000C0080402136
+:1003A0003C0280088C4400048CA300081064000800
+:1003B00030C9000530C5000510A0001C8FBF00101B
+:1003C0002402000103E0000827BD001830C9000521
+:1003D0001120001030CB001210E0FFF98FBF001089
+:1003E0003C0880088CA700088D06000414E6FFF581
+:1003F00024020001240400382405008D0E00162E6E
+:10040000240600128FBF00102402000103E0000840
+:1004100027BD0018240A0012156AFFE98FBF0010DB
+:10042000010020210A00167027BD001800002021BD
+:100430000A000D1A27BD00183C05080024A55DC060
+:100440003C04080024847B803C02080024425DC8F0
+:10045000240300063C010801AC2583503C0108013F
+:10046000AC2483543C010801AC2283583C010801B0
+:10047000A023835C03E000080000000003E0000804
+:10048000240200013C028000308800FF34470180D4
+:100490003C0680008CC301B80460FFFE0000000031
+:1004A0008CC501282418FF803C0D800A24AF010070
+:1004B00001F8702431EC007FACCE0024018D2021A6
+:1004C000ACE50000948B00DA3509600024080002D6
+:1004D000316AFFFFACEA000424020001A4E900082D
+:1004E000A0E8000BACE000243C071000ACC701B84A
+:1004F000AF84002C03E00008AF85005C8C990004F9
+:100500008F8D002C2409FFBF0325C023AC98000465
+:1005100091AF00C42403FFEF31EE007FA1AE00C411
+:100520008C8C0020938B00388F86002C358A00023B
+:10053000AF8B0050A780004CAC8A0020A4C000AC58
+:1005400090C800C401093824A0C700C48F84002CBF
+:10055000AC8000DC908500C400A3102403E00008F8
+:10056000A08200C43C028000344501803C0480002D
+:100570008C8301B80460FFFE8F89005C24076083D0
+:1005800024060002ACA900008C880124ACA8000459
+:10059000A4A70008A0A6000B3C05100003E000087B
+:1005A000AC8501B8938800388F8900508F82002C69
+:1005B00030C600FF0109382330E900FF012218216D
+:1005C00030A500FF2468007810C000020124382103
+:1005D0000080382130E400031480000330AA0003B7
+:1005E0001140000D312B000310A000090000102164
+:1005F00090ED0000244E000131C200FF0045602B49
+:10060000A10D000024E700011580FFF92508000175
+:1006100003E00008000000001560FFF30000000088
+:1006200010A0FFFB000010218CF8000024590004EA
+:10063000332200FF0045782BAD18000024E70004AA
+:1006400015E0FFF92508000403E0000800000000A1
+:1006500093850038938800488F870050000432004B
+:100660003103007F00E5102B30C47F001040000FE5
+:10067000006428258F84002C3C0980008C8A00DCD3
+:10068000AD2A00A43C03800000A35825AC6B00A059
+:100690008C6C00A00580FFFE000000008C6D00AC9B
+:1006A000AC8D00DC03E000088C6200A80A0017F2A1
+:1006B0008F84002C938800493C02800000805021E8
+:1006C000310300FEA383004930ABFFFF30CC00FFB5
+:1006D00030E7FFFF344801803C0980008D2401B8D9
+:1006E0000480FFFE8F8D005C24180016AD0D000005
+:1006F0008D2201248F8D002CAD0200048D59002025
+:10070000A5070008240201B4A119000AA118000BD2
+:10071000952F01208D4E00088D4700049783004CD3
+:100720008D59002401CF302100C7282100A32023A8
+:100730002418FFFFA504000CA50B000EA502001055
+:10074000A50C0012AD190018AD18002495AF00D803
+:100750003C0B10002407FFF731EEFFFFAD0E002821
+:100760008DAC0074AD0C002CAD2B01B88D46002073
+:1007700000C7282403E00008AD4500208F88002C26
+:100780000080582130E7FFFF910900C63C0280003D
+:1007900030A5FFFF312400FF00041A000067502538
+:1007A00030C600FF344701803C0980008D2C01B821
+:1007B0000580FFFE8F82005C240F0017ACE2000072
+:1007C0008D390124ACF900048D780020A4EA0008DA
+:1007D000241901B4A0F8000AA0EF000B9523012012
+:1007E0008D6E00088D6D00049784004C01C350216C
+:1007F000014D602101841023A4E2000CA4E5000E49
+:10080000A4F90010A4E60012ACE000148D780024D6
+:10081000240DFFFFACF800188D0F006CACEF001C2E
+:100820008D0E00683C0F1000ACEE0020ACED0024F3
+:10083000950A00AE240DFFF73146FFFFACE6002815
+:10084000950C00709504007231837FFF0003CA008D
+:100850003082FFFF0322C021ACF8002CAD2F01B87D
+:10086000950E00728D6A002000AE3021014D2824C3
+:10087000A506007203E00008AD6500203C02800080
+:10088000344601803C0580008CA301B80460FFFE63
+:1008900024090018ACC40000A0C9000B8F88002CEC
+:1008A0003C041000950700AEA4C70010ACC0003097
+:1008B00003E00008ACA401B83C028000344501808C
+:1008C0003C0480008C8301B80460FFFE8F8A0034F2
+:1008D000240600199549001C3128FFFF000839C083
+:1008E000ACA70000A0A6000B3C05100003E0000828
+:1008F000AC8501B88F87003C0080402130C400FFE8
+:100900003C0680008CC201B80440FFFE8F89005C69
+:100910009383005834996000ACA90000A0A300059F
+:100920008CE20010240F00022403FFF7A4A20006AB
+:10093000A4B900088D180020A0B8000AA0AF000BD1
+:100940008CEE0000ACAE00108CED0004ACAD0014D9
+:100950008CEC001CACAC00248CEB0020ACAB002871
+:100960008CEA002C3C071000ACAA002C8D09002456
+:10097000ACA90018ACC701B88D05002000A3202445
+:1009800003E00008AD040020938500582403000113
+:1009900027BDFFE800A330042CA20020AFB0001058
+:1009A000AFBF001400C01821104000132410FFFE38
+:1009B0003C0708008CE7319000E610243C088000DA
+:1009C0003505018014400005240600848F89002C21
+:1009D000240A00042410FFFFA12A00EC0E00188E48
+:1009E00000000000020010218FBF00148FB0001023
+:1009F00003E0000827BD00183C0608008CC63194AF
+:100A00000A0018C000C310248F87003427BDFFE000
+:100A1000AFB20018AFB10014AFB00010AFBF001CF0
+:100A200030D000FF90E6000D00A0882100809021CA
+:100A300030C5007FA0E5000D8F85002C8E230018A7
+:100A40008CA200C01062002E240A000E0E0018B303
+:100A5000A38A00582409FFFF104900222404FFFF45
+:100A600052000020000020218E2600003C0C0010C7
+:100A700000CC5824156000393C0E000800CE6824D4
+:100A800055A0003F024020213C18000200D88024DD
+:100A90001200001F3C0A00048F8700348CE200140F
+:100AA0008CE300108CE500140043F82303E5C82B09
+:100AB00013200005024020218E24002C8CF1001010
+:100AC000109100310240202124020012A38200581C
+:100AD0000E0018B32412FFFF105200022404FFFF7F
+:100AE000000020218FBF001C8FB200188FB10014AE
+:100AF0008FB000100080102103E0000827BD002007
+:100B000090A800C4350400200A0018E9A0A400C47D
+:100B100000CA48241520000B8F8B00348F8D0034C1
+:100B20008DAC00101580000B024020218E2E002C71
+:100B300051C0FFEC00002021024020210A001904CE
+:100B4000240200178D66001050C0FFE6000020212F
+:100B5000024020210A001904240200110240202131
+:100B6000240200150E0018B3A3820058240FFFFFC3
+:100B7000104FFFDC2404FFFF0A0018F38E2600004C
+:100B80000A00192A240200143C08000400C8382472
+:100B900050E0FFD400002021024020210A00190467
+:100BA000240200138F86002C27BDFFE0AFB1001494
+:100BB000AFBF0018AFB0001090C300C430A500FF55
+:100BC0003062002010400008008088218CCB00C0DB
+:100BD0002409FFDF256A0001ACCA00C090C800C428
+:100BE00001093824A0C700C414A000403C0C8000B8
+:100BF0008F84002C908700C42418FFBF2406FFEFC9
+:100C000030E3007FA08300C4979F004C8F82005088
+:100C10008F8D002C03E2C823A799004CA5A000AC3F
+:100C200091AF00C401F87024A1AE00C48F8C002CD9
+:100C3000A18000C78F8A002CA5400072AD4000DC67
+:100C4000914500C400A65824A14B00C48F900028F1
+:100C50008F8400509786004C0204282110C0000F9A
+:100C6000AF850028A38000483C0780008E2C000838
+:100C700094ED01208E2B0004018D5021014B802129
+:100C8000020620233086FFFF30C8000F390900011B
+:100C90003131000116200009A388004893860038EE
+:100CA0008FBF00188FB100148FB0001027BD002037
+:100CB000AF85005403E00008AF86005000C87023E1
+:100CC0008FBF0018938600388FB100148FB00010CA
+:100CD00034EF0C00010F282127BD0020ACEE00846A
+:100CE000AF85005403E00008AF86005035900180C6
+:100CF000020028210E00188E240600828F84002C0A
+:100D0000908600C430C5004050A0FFBAA3800058B0
+:100D10008F85003C3C0680008CCD01B805A0FFFE0D
+:100D20008F89005C2408608224070002AE0900005D
+:100D3000A6080008A207000B8CA300083C0E1000B8
+:100D4000AE0300108CA2000CAE0200148CBF001485
+:100D5000AE1F00188CB90018AE1900248CB80024FE
+:100D6000AE1800288CAF0028AE0F002CACCE01B816
+:100D70000A00194EA38000588F8A002C27BDFFE07F
+:100D8000AFB10014AFB000108F880050AFBF001893
+:100D900093890030954200AC30D100FF0109182B37
+:100DA0000080802130AC00FF3047FFFF0000582159
+:100DB00014600003310600FF01203021010958238F
+:100DC0009783004C0068202B1480001B000000005B
+:100DD00010680043240A0001118A004834E70880A3
+:100DE0003165FFFF0E001830020020210E00187040
+:100DF0008F84005C8F84002C948D007025AC0001E2
+:100E0000A48C0070948B00703C0608008CC631885E
+:100E100031677FFF10E6004F000000000200202134
+:100E2000022028218FBF00188FB100148FB000104E
+:100E30000A00193A27BD0020914400C42406FF800F
+:100E400000868825A15100C49784004C3088FFFF9C
+:100E50001100001C938900308F8E002C2419EFFFA5
+:100E6000008BF82395D800AC0168682B33E900FFAC
+:100E700003197824A5CF00AC51A0002A0100582105
+:100E80008E0500202408FFFB2403000100A8102485
+:100E9000AE0200201183002534E7800002002021EB
+:100EA0003165FFFF0E00183001203021978B004C78
+:100EB0008F870050A780004C00EB8023AF9000503C
+:100EC000938900308F8C002C8FBF00188FB10014D5
+:100ED0008FB0001027BD002003E00008A18900C7E3
+:100EE0008E0800202409FFFB34E780000109282434
+:100EF000AE050020158AFFBA34E7088002002021E1
+:100F00000E0017FE3165FFFF02002021022028217C
+:100F10008FBF00188FB100148FB000100A00193A6B
+:100F200027BD00200A0019F10000482102002021FD
+:100F30003165FFFF0E0017FE01203021978B004C1A
+:100F40008F870050A780004C00EB80230A001A0115
+:100F5000AF90005094890070240A8000012A402438
+:100F6000A4880070908500709099007030A200FFF6
+:100F7000000219C20003F827001FC1C0332F007FF1
+:100F800001F87025A08E00700A0019D902002021F6
+:100F90008F88002C24030001910A0078910500C776
+:100FA000250900783147003F24E6FFE000C318041C
+:100FB0002CC2002030670019A38500301040001AB1
+:100FC000AF89003C3C0A8000354B0002240500013B
+:100FD0002406000114E00016006B102400002821F4
+:100FE0001440000F306300201060000F2405000142
+:100FF0008D0600748D1900742403FF8000C3102433
+:10100000000279403338007F01F868253C0E10005B
+:1010100001AE6025AD4C0830912800013106000179
+:101020000A0019AF0000000003E000080000000003
+:101030008D0F00748D0D00742418FF8001F870244A
+:10104000000E414031AC007F010C50253C0B1000DC
+:10105000014B38253C0980000A0019AFAD27083044
+:1010600027BDFFD8AFB000108F90003CAFB4002078
+:10107000AFB10014AFBF0024AFB3001CAFB2001873
+:101080008E0500103C0208008C4231B08F86004073
+:1010900030A73FFF00E2182B8CD20014008088217B
+:1010A0008CD30020106000070000A02190CB000D21
+:1010B000240AFF80014B4824312800FF1500000C52
+:1010C00000056382022020212411000DA391005805
+:1010D0008FBF00248FB400208FB3001C8FB2001884
+:1010E0008FB100148FB000100A0018B327BD00287C
+:1010F0003185000354A0FFF40220202194CF001C6E
+:101100008F8E002C8E070028A5CF00D88CCD001024
+:10111000024D302310E6005C2402001F0E0018B3BD
+:10112000A3820058241FFFFF105F004E2404FFFF1E
+:101130008F8300448F880034026398218D0900104A
+:10114000012310238F830024AD020010AD13002073
+:101150008C67007400F3202B148000620220202191
+:101160008F8600408E0C00248CC50024118500075A
+:1011700002202021240E001C0E0018B3A38E00585C
+:10118000240DFFFF104D00372404FFFF8F8400342F
+:101190008C980024270F0001AC8F002412720044A9
+:1011A0008F9900248F320074125300413C0A008052
+:1011B0008E090000012A10241440003A00000000AB
+:1011C0008E0400142412FFFF10920006240B001B53
+:1011D000022020210E0018B3A38B005810520021CA
+:1011E0002404FFFF8E0300003C0C0001006C282447
+:1011F00010A000133C0600800066A02416800009A1
+:101200000200282102202021240E001A0E0018B30B
+:10121000A38E0058240DFFFF104D00122404FFFF81
+:1012200002002821022020210E0018D324060001EC
+:101230002410FFFF2404FFFF1050000A24140001B3
+:101240008F8F0034022020210280302195F200345B
+:1012500024050001265800010E0019AFA5F800343E
+:10126000000020218FBF00248FB400208FB3001C0A
+:101270008FB200188FB100148FB0001000801021C1
+:1012800003E0000827BD00288F83004400E3C82145
+:101290000259C02B1300FFA88F8800340A001A9847
+:1012A00024020018AC8000200A001AC28E04001428
+:1012B0008E1F00003C07008003E798241660FFF9AA
+:1012C0002408001A022020210E0018B3A388005819
+:1012D0002403FFFF1443FFBA2404FFFF0A001AEBA4
+:1012E0008FBF0024240B001D0E0018B3A38B0058E1
+:1012F000240AFFFF144AFF9A2404FFFF0A001AEB96
+:101300008FBF00248F85002C27BDFFD8AFB3001CF2
+:10131000AFB20018AFB10014AFB00010AFBF0020E3
+:1013200090A700C48F90003C2412FFFF34E20040DD
+:1013300092060000A0A200C48E0300100080982135
+:101340001072000630D1003F2408000D0E0018B3C3
+:10135000A3880058105200262406FFFF8F8A002C15
+:101360008E0900188D4400C011240007240C000EC3
+:10137000026020210E0018B3A38C0058240BFFFF3D
+:10138000104B001B2406FFFF24040020122400043D
+:101390008F8D002C91AF00C435EE0020A1AE00C4AB
+:1013A0008F85004410A0001A000000001224004B9A
+:1013B0008F98002C8F92FEDC2406FFFD97100070A2
+:1013C0009651000A1230000B8FBF00203C1F08000E
+:1013D0008FFF318C03E5C82B1720001E02602021EF
+:1013E000000028210E0019AF240600010000302162
+:1013F0008FBF00208FB3001C8FB200188FB1001474
+:101400008FB0001000C0102103E0000827BD0028A5
+:101410005224002A8E0300148F84002C94890070BB
+:1014200025280001A4880070948700703C050800FE
+:101430008CA5318830E27FFF1045000E00000000CF
+:10144000026020210E00193A240500010A001B4DFC
+:10145000000030212402002DA38200580E0018B392
+:101460002413FFFF1453FFE12406FFFF0A001B4E65
+:101470008FBF00209498007024198000240500017B
+:1014800003199024A492007090910070908D0070C8
+:10149000323000FF001079C2000F7027000E61C0CB
+:1014A00031AB007F016C5025A08A00700E00193A04
+:1014B000026020210A001B4D000030212406FFFF9E
+:1014C0001466FFD68F84002C026020210E00193A8A
+:1014D000240500010A001B4D00003021026020217C
+:1014E0000A001B672402000A8F88002C27BDFFE832
+:1014F000AFB00010AFBF0014910A00C48F87003C4A
+:1015000000808021354900408CE60010A10900C40C
+:101510003C0208008C4231B030C53FFF00A2182BBE
+:10152000106000078F850040240DFF8090AE000DF5
+:1015300001AE6024318B00FF156000080006C382F5
+:10154000020020212403000D8FBF00148FB0001073
+:1015500027BD00180A0018B3A38300583306000300
+:10156000240F000254CFFFF70200202194A2001C98
+:101570008F85002C24190023A4A200D88CE8000039
+:1015800000081E02307F003F13F900353C0A00833B
+:101590008CE800188CA600C01106000800000000AE
+:1015A0002405000E0E0018B3A38500582407FFFF82
+:1015B000104700182404FFFF8F85002C90A900C459
+:1015C00035240020A0A400C48F8C0034918E000D1F
+:1015D00031CD007FA18D000D8F8300441060001C71
+:1015E000020020218F8400408C9800100303782B88
+:1015F00011E0000D2419001802002021A3990058C1
+:101600000E0018B32410FFFF105000022404FFFF47
+:10161000000020218FBF00148FB000100080102127
+:1016200003E0000827BD00188C8600108F9F00344F
+:101630000200202100C31023AFE2001024050001A6
+:101640000E0019AF240600010A001BD6000020215D
+:101650000E00193A240500010A001BD600002021C3
+:10166000010A5824156AFFD98F8C0034A0A600EC1B
+:101670000A001BC3A386004A27BDFFD8AFB00010E5
+:101680008F90003CAFB20018AFBF0020AFB3001C7A
+:10169000AFB100148E1100103C0308008C6331B010
+:1016A00032253FFF00A3102B10400008008090213E
+:1016B0008F8600402409FF8090CA000D012A402433
+:1016C000310700FF14E0000B00116B820240202163
+:1016D0002412000DA39200588FBF00208FB3001C6E
+:1016E0008FB200188FB100148FB000100A0018B329
+:1016F00027BD002831AC0003240B0001558BFFF4FB
+:101700000240202190CF000D31EE000811C0006092
+:101710008F93004416600009240200278E19000CE4
+:101720008CD8002017380005240200208E02000803
+:101730008CDF0024105F0040240200200E0018B34C
+:10174000A38200582406FFFF104600332404FFFF45
+:101750008F990034240AFFF73C13800E9329000D63
+:101760002404FF803C0D8000012AF824A33F000DD3
+:101770008F9900243C0808008D0831AC8F83005CF1
+:10178000972700788F9F00340103102130E57FFFF9
+:10179000000530400046782131F8007F03136021B6
+:1017A00001E47024ADAE002CA59100008FEB002861
+:1017B000256A0001AFEA00288FE3002C8E09002C77
+:1017C00000694021AFE8002C8E07002CAFE7003005
+:1017D0008E050014AFE5003497E6003A24C20001FC
+:1017E000A7E2003A973300783C1008008E1031B021
+:1017F0002663000130717FFF123000270060302126
+:101800008F8F002402402021240500010E00193A88
+:10181000A5E60078000020218FBF00208FB3001CB8
+:101820008FB200188FB100148FB00010008010210B
+:1018300003E0000827BD00288E0500142413FFFFD5
+:1018400010B3001D8F83002C8E0800188C6700C019
+:10185000150700092402000E8E0A00248CC90028F6
+:1018600015490005240200218E0700288CCB002C8E
+:1018700010EB00132402001F0E0018B3A3820058BF
+:101880001453FFB32404FFFF0A001C588FBF00202D
+:101890000A001C2024020024240E8000006E68240C
+:1018A00031ACFFFF000C5BC2317100FF00118027DB
+:1018B0000A001C51001033C00A001C6F24020025CE
+:1018C0008E05002C10A0FFEC240200238F8E002434
+:1018D0008DCD007401A5602B1580FFE72402002642
+:1018E0008CCF001400A7C02101F8202B1080FF9995
+:1018F0008F990034024020210A001C6F240200222C
+:1019000027BDFFE0AFB000108F90003CAFB10014D6
+:10191000AFBF00188E0500103C0308008C6331B087
+:101920000080882130A43FFF0083102B1040000767
+:101930008F8600402409FF8090CA000D012A4024B0
+:10194000310700FF14E000098F8B00442410000DC4
+:1019500002202021A39000588FBF00188FB10014DF
+:101960008FB000100A0018B327BD002011600008D6
+:101970000005C3828F8F002C8F8EFEDC2407FFFDB5
+:1019800095EC007095CD000A11AC00388FBF00189F
+:101990003305000314A0001000000000921900029B
+:1019A00013200041000000008E06002450C0000FEC
+:1019B00092040003022020212402000F0E0018B31D
+:1019C000A38200582408FFFF144800072407FFFFE4
+:1019D0000A001CEC8FBF001890C3000D3064000893
+:1019E0001080003702202021920400032407000207
+:1019F000308900FF15270005308F00FF8F8A0044D3
+:101A000011400031240C002C308F00FF39E500100C
+:101A10002CAD00012DEE00010200282101CD302562
+:101A20000E0018D3022020212410FFFF1050000EBA
+:101A30002407FFFF8F83004410600017022020213D
+:101A40003C1908008F39318C0323C02B5700000C40
+:101A50002411002D02202021000028210E0019AFA2
+:101A600024060001000038218FBF00188FB1001438
+:101A70008FB0001000E0102103E0000827BD002017
+:101A80000E0018B3A39100581450FFF62407FFFF6F
+:101A90000A001CEC8FBF00180E00193A2405000143
+:101AA0000A001CEB000038218CDF00248E02002489
+:101AB000545FFFC1022020210A001CCC92040003C5
+:101AC0000A001CC024020010022020210E0018B3BE
+:101AD000A38C0058240BFFFF104BFFE32407FFFFEC
+:101AE0000A001CD39204000330A500FF2406000165
+:101AF00024A9000100C9102B1040000C0000402157
+:101B0000240A000100A61823308B000124C600011E
+:101B1000006A3804000420421160000200C9182B3A
+:101B2000010740251460FFF800A6182303E0000811
+:101B30000100102127BDFFD8AFB000188F90003CE6
+:101B4000AFB1001CAFBF00202403FFFF2411002F02
+:101B5000AFA3001092060000240500082610000123
+:101B6000006620260E001D0B308400FF00021E00C0
+:101B70003C021EDC34466F410A001D330000102178
+:101B800010A00009008018212445000130A2FFFFA9
+:101B90002C4500080461FFFA00032040008620263F
+:101BA00014A0FFF9008018210E001D0B2405002051
+:101BB0008FA300102629FFFF313100FF00034202EE
+:101BC000240700FF1627FFE2010218260003502712
+:101BD000AFAA0014AFAA00100000302127A80010FF
+:101BE00027A7001400E6782391ED000324CE00011E
+:101BF00000C8602131C600FF2CCB00041560FFF93E
+:101C0000A18D00008FA200108FBF00208FB1001C9B
+:101C10008FB0001803E0000827BD00289383003828
+:101C200027BDFFE024020034AFB10014AFB00010B4
+:101C3000AFBF001CAFB200180080802110620064AA
+:101C400000A0882192240004148000478F88002C73
+:101C5000A38000308E2500048D0700C83C0600FFDD
+:101C600034C3FFFF00A3302400E6102B1440004FC4
+:101C7000AF860044978A004C8F8800500148382373
+:101C800010C00034A787004C8F99002430DF000378
+:101C9000001F20239332007C309000030206702145
+:101CA0000012C082331200010012788001CF682137
+:101CB00030ECFFFF018D582B1160005F8F87002CE7
+:101CC0008F8900288F8200541049005C3C033F013B
+:101CD0008E2500003C11250000A3382414F1007665
+:101CE0008F84003C8F88003C8F87002C8D0A000079
+:101CF000ACEA00788D060010ACE600888F880050B2
+:101D00008F860044938B0030012860210206282131
+:101D1000020B1821A383003094E900ACAF8C00289B
+:101D200035301000A4F000AC1640005024780004B8
+:101D3000AF850050000020218FBF001C8FB200181B
+:101D40008FB100148FB000100080102103E0000854
+:101D500027BD00208F840028AF800050008890218C
+:101D60000A001D9EAF920028241F000CA39F00585C
+:101D70000E0018B3020020212419FFFF1059FFEEB6
+:101D80002404FFFF8F88002CA38000308E250004E0
+:101D90008D0700C83C0600FF34C3FFFF00A33024BA
+:101DA00000E6102B1040FFB3AF8600440200202154
+:101DB00024090019A38900580E0018B32410FFFF4E
+:101DC0001050FFDD2404FFFF0A001D6E8F860044C3
+:101DD0008F84002C8F87003C8CF20030908600C4EA
+:101DE00030C5001014A000108F8300502C6800052F
+:101DF0001500002600000000908A00C4246BFFFC40
+:101E00003149001015200008316400FF8F8D005407
+:101E10008F8C002811AC0004388F000131EE0001D6
+:101E200015C0002D000000000E001D1E0000000067
+:101E30000A001DF5000000008F890028938B0030F8
+:101E40000128602102062821020B1821A3830030FB
+:101E500094E900ACAF8C002835301000A4F000AC41
+:101E60005240FFB4AF85005024780004A39800309E
+:101E700094EE00AC24AF0004AF8F005035CD2000AD
+:101E8000A4ED00AC0A001D9F000020218C8200DC24
+:101E90001242FF6C0200202124180005A39800586C
+:101EA0000E0018B32412FFFF1452FF662404FFFF34
+:101EB0000A001DA08FBF001C310500FF0E0017BADD
+:101EC000000030218F87002C8F8800508F890028D8
+:101ED0000A001D928F8600440E0017E500000000E6
+:101EE0000A001DF5000000009383004A27BDFFE0B3
+:101EF00024020002AFB20018AFB10014AFBF001C43
+:101F000000808821AFB000100000902110620055C1
+:101F10002404FFFD9783004C8F8500503066FFFF3F
+:101F200000C5202B1480005B938700383C0880009C
+:101F30009504012010E500528F8A00288F840054F8
+:101F400030A500FF0E0017BA240600018F9F005C29
+:101F50003C0580003C19408027ED017831B00078C5
+:101F6000240EFF800219582534AF090031B800074C
+:101F700001AE6024ACAC0800030F8021ACAB0810AC
+:101F800002202021020028210E001D58AF90003CA5
+:101F90002403FFFF104300332404FFFF8E0C0010C6
+:101FA0003C0708008CE731B09206000031843FFF07
+:101FB0000087102B1040002330CD003F8F98005C2D
+:101FC000000471803C0408008C8431A82409FF803F
+:101FD0009390004900984021010E2021008970242F
+:101FE000000E51403C0980003099007F3C0F00807A
+:101FF0008F88002C3525094035E20001015938252C
+:10200000308B0078308600073C0310003C1F800CAA
+:1020100000C5C0210162582500E35025033F782107
+:1020200036050001AD2E0804AF980040AD2B081412
+:10203000AF8F0034AD2E0028AD040074AD2A0830F7
+:10204000A38500499383004A2410000350700027A1
+:1020500025A3FFE0240C0001106C001C24060023C3
+:10206000024020218FBF001C8FB200188FB10014D6
+:102070008FB000100080102103E0000827BD002071
+:10208000314900035520FFAE8F8400540A001E31F1
+:102090008F9000548F840054306500FF0E0017BAF3
+:1020A00024060001938B00382405003411650018C4
+:1020B0009783004C8F8500503062FFFF00A25823A9
+:1020C000AF8B00500A001E69A780004C11A6003794
+:1020D00000000000022020212411000B0E0018B384
+:1020E000A39100580A001E69004090212C72002024
+:1020F0001240FFF80003F8803C07080124E781AC98
+:1021000003E7C8218F2D000001A000080000000097
+:102110008F8500502CA200055440001DA780004C64
+:10212000978A004C3148FFFF00A848232D2F000557
+:1021300011E00003314400FF24AEFFFC31C400FF76
+:102140008F9000548F9800281218000438990001CD
+:10215000332D000115A00029000000008F91002CF4
+:10216000922500C434A30010A22300C49783004C1E
+:102170008F8500508F84002C3062FFFF00A258230F
+:10218000AC8000DCA780004C0A001E69AF8B0050B9
+:102190003062FFFF00A258230A001E69AF8B005077
+:1021A0002403FFFF11830005000000000E001B8BBD
+:1021B000022020210A001E69004090210E001B12FF
+:1021C000022020210A001E69004090210E001BEF12
+:1021D000022020210A001E69004090210E001A6989
+:1021E000022020210A001E69004090210E001C914F
+:1021F000022020210A001E69004090210E0017E5F0
+:10220000000000009783004C8F850050306CFFFF6A
+:1022100000AC38232CFF000553E0FFA83062FFFF1D
+:102220008F86002CA780004CACC200DC3062FFFF20
+:1022300000A258230A001E69AF8B005027BDFFD0B3
+:10224000AFB20018AFB00010AFBF0028AFB5002488
+:10225000AFB40020AFB3001CAFB100143C0C800041
+:102260008D880128240FFF803C07800A251001007B
+:10227000250B0080020F68243205007F016F702457
+:10228000AD8E009000A72821AD8D002490A700EC12
+:102290003169007F3C0A8004012A1821A387004A83
+:1022A0009066007C00809021AF83002430C2000241
+:1022B000AF88005CAF85002C00A0182114400002FC
+:1022C0002404003424040030A38400388C6600CC3D
+:1022D00030F100FF24040004AF86005012240004F3
+:1022E000A38000588E5300041660001D3C08800037
+:1022F0009387004930F200011240000F8FBF002881
+:102300008CB800748CA400742419FF8003198824ED
+:1023100000117140308F007F01CF60253C0D2000FF
+:10232000018D582530F500FE3C0A8000AD4B083089
+:10233000A39500498FBF00288FB500248FB40020DB
+:102340008FB3001C8FB200188FB100148FB0001033
+:102350002402000127BD003003E00008ACA600CC39
+:102360008E590008951F01208E460010033FC021A2
+:102370003307FFFF30F5000F32B40001AF860028AD
+:102380001680003BA395004835060C0002A61021DC
+:1023900000F51823AD030084AF8200548E49000479
+:1023A0003128FFFF1100002BA789004C2410FF806B
+:1023B0003C1580003C1420000A001F572413FFFE28
+:1023C00090AE00C4020E682431AC00FF1580002AD4
+:1023D00002402021938400499786004C308F0001F1
+:1023E00011E0000B026428248F89002C8D230074D7
+:1023F0008D280074A3850049007010240002C94094
+:10240000311F007F033FC02503148825AEB108307B
+:1024100010C000108F85002C90A700C4020758241C
+:10242000316A00FF1540FFE6024020210E001E0B1E
+:102430009791004C1040FFE8938400492405FFFD6C
+:10244000544500058E430020022028210E001790DD
+:10245000024020218E430020307000041600000A44
+:102460002414FFFB8F85002C0A001F0D8F8600505F
+:102470000A001F38AF8600540E001A350000000015
+:102480000A001F4793840049007498240E0017AA7D
+:10249000AE5300208F85002C0A001F0D8F86005040
+:1024A00027BDFFD8AFB3001CAFB10014AFBF0020F1
+:1024B000AFB20018AFB000103C0280008C52014057
+:1024C0008C4B01483C048000000B8C02322300FF3F
+:1024D000317300FF8C8501B804A0FFFE34900180A9
+:1024E000AE1200008C8701442464FFF02406000231
+:1024F0002C830013AE070004A6110008A206000BEF
+:10250000AE1300241060004F8FBF002000044880ED
+:102510003C0A0801254A822C012A40218D04000032
+:1025200000800008000000003C1008008E1031A858
+:1025300031733FFF001389800212C8212405FF80F8
+:1025400003312021264C0100264700803C1F8000DB
+:1025500000E51824318F007F30E9007F308A007F4A
+:102560003C18800A3C0E80043C0D800C0085102431
+:1025700001853024014D8021AFE6002401F840217F
+:10258000AFE30090012E9821AFE20028AF90003415
+:10259000AF88002CAF9300240E00187F01608021CB
+:1025A0003C0380008C6B01B80560FFFE8F87003410
+:1025B000346501808F86002C90E3000DACB20000E2
+:1025C000A4B00006000316000002FE03001F9027BF
+:1025D000001227C21080007A24C200782419608279
+:1025E000A4B90008A0A00005241F0002A0BF000B92
+:1025F00000041C008F8B00243C0227000062902501
+:10260000ACB20010ACA00014ACA00024ACA0002818
+:10261000ACA0002C8D7300382410FF80ACB30018E0
+:1026200090E4000D02048824322500FF10A000056C
+:102630008FBF002090EC000D3188007FA0E8000DD6
+:102640008FBF00208FB3001C8FB200188FB1001411
+:102650008FB000103C0D10003C0A800027BD002800
+:1026600003E00008AD4D01B8265F01002405FF809E
+:1026700033F8007F3C06800003E578243C19800A8B
+:1026800003192021ACCF0024908E00C400AE682432
+:1026900031AC00FF1180FFEAAF84002C248E00785B
+:1026A00095CD00123C0C08008D8C31A831AB3FFF5A
+:1026B00001924821000B5180012A4021010520246C
+:1026C000ACC400283107007F3C06800C00E62021C6
+:1026D0009083000D00A31024304500FF10A0FFD808
+:1026E000AF8400349098000D330F001015E0FFD533
+:1026F0008FBF00200E00187F000000003C03800008
+:102700008C7901B80720FFFE00000000AE12000027
+:102710008C720144AE120004A611000824110002BC
+:10272000A211000BAE1300240A001FE28FBF00208D
+:102730003C1260008E452C083C03F0033462FFFF1E
+:1027400000A2F824AE5F2C088E582C083C1901B06A
+:1027500003199825AE532C080A001FE28FBF0020F2
+:10276000264D010031AF007F3C10800A240EFF800F
+:1027700001F0282101AE60243C0B8000AD6C0024E8
+:102780001660FFAFAF85002C24110003A0B100EC50
+:102790000A001FE28FBF002026480100310A007F97
+:1027A0003C0B800A2409FF80014B302101092024C1
+:1027B0003C078000ACE400240A001FE1AF86002C37
+:1027C000944A001232083FFF314C3FFF1588FF84C6
+:1027D0002419608290CF00C4240EFF8001CF4824CA
+:1027E000312D00FF11A0FF7E00000000240700042F
+:1027F000A0C700EC8F870034241860842406000DE5
+:10280000A4B80008A0A600050A001FCC241F0002DF
+:102810000800330C0800330C080033E8080033BC10
+:10282000080033A0080032F0080032F0080032F04F
+:102830000800331480080100800800808008000030
+:102840005F865437E4AC62CC50103A453662198545
+:10285000BF14C0E81BC27A1E84F4B556094EA6FE0A
+:102860007DDA01E7C04D748108007AE408007B300E
+:1028700008007AF008007A1808007AF008007B2037
+:1028800008007AF008007A1808007A1808007A1808
+:1028900008007A1808007A1808007A1808007A18D0
+:1028A00008007A1808007A1808007A1808007B10C7
+:1028B00008007B0008007A1808007A1808007A18C7
+:1028C00008007A1808007A1808007A1808007A18A0
+:1028D00008007A1808007A1808007A1808007A1890
+:1028E00008007A1808007B00080080DC08007F845C
+:1028F000080080A408007F840800807408007E6CB3
+:1029000008007F8408007F8408007F8408007F849B
+:1029100008007F8408007F8408007F8408007F848B
+:1029200008007F8408007F8408007F8408007F847B
+:0429300008007FAC70
+:0C2934000A00012200000000000000006A
+:102940000000000D747061352E302E306A390000A1
+:102950000500000100000000000000000000000071
+:102960000000000000000000000000000000000067
+:102970000000000000000000000000000000000057
+:102980000000000000000000000000000000000047
+:102990000000000000000000000000000000000037
+:1029A0000000000000000000000000000000000027
+:1029B0000000000000000000000000000000000017
+:1029C00010000003000000000000000D0000000DDA
+:1029D0003C02080024421C203C03080024631FA082
+:1029E000AC4000000043202B1480FFFD2442000473
+:1029F0003C1D080037BD2FFC03A0F0213C1008004F
+:102A0000261004883C1C0800279C1C200E0002E2B3
+:102A1000000000000000000D2402FF8027BDFFE041
+:102A200000821024AFB00010AF420020AFBF0018EA
+:102A3000AFB10014936500043084007F0344182173
+:102A40003C0200080062182130A5002003608021AC
+:102A50003C080111277B000814A000022466005CDA
+:102A60002466005892020004974301049204000473
+:102A70003047000F3063FFFF308400400067282399
+:102A80001080000900004821920200053042000435
+:102A9000104000050000000010A00003000000002E
+:102AA00024A5FFFC24090004920200053042000422
+:102AB000104000120000000010A0001000000000F4
+:102AC0009602000200A72021010440252442FFFEB7
+:102AD000A7421016920300042402FF800043102432
+:102AE000304200FF104000033C0204000A00017263
+:102AF000010240258CC20000AF4210188F420178BD
+:102B00000440FFFE2402000AA74201409602000290
+:102B1000240400093042000700021023304200075D
+:102B2000A7420142960200022442FFFEA74201444E
+:102B3000A740014697420104A74201488F4201087D
+:102B400030420020504000012404000192020004A1
+:102B5000304200101440000234830010008018211D
+:102B6000A743014A00000000000000000000000030
+:102B700000000000AF48100000000000000000004E
+:102B800000000000000000008F4210000441FFFE22
+:102B90003102FFFF10400007000000009202000415
+:102BA0003042004014400003000000008F42101823
+:102BB000ACC20000960200063042FFFF2442000231
+:102BC0000002104300021040036288219622000098
+:102BD0001120000D3044FFFF00A710218F83003823
+:102BE0008F45101C0002108200021080004310214B
+:102BF000AC45000030A6FFFF0E0002D100052C02FC
+:102C000000402021A6220000920300042402FF803D
+:102C100000431024304200FF1040001F000000005D
+:102C200092020005304200021040001B000000002C
+:102C30009742100C2442FFFEA7421016000000002D
+:102C40003C02040034420030AF421000000000009B
+:102C50000000000000000000000000008F42100093
+:102C60000441FFFE000000009742100C8F45101C2D
+:102C70003042FFFF24420030000210820002108028
+:102C8000005B1021AC45000030A6FFFF0E0002D112
+:102C900000052C02A62200009604000224840008ED
+:102CA0000E0001E73084FFFF974401040E0001F598
+:102CB0003084FFFF8FBF00188FB100148FB0001059
+:102CC0003C02100027BD002003E00008AF4201785D
+:102CD0003084FFFF308200078F85002410400002FF
+:102CE000248300073064FFF800A4102130421FFF46
+:102CF00003421821247B4000AF850028AF820024C6
+:102D000003E00008AF4200843084FFFF3082000FF0
+:102D10008F85002C8F860034104000022483000F22
+:102D20003064FFF000A410210046182BAF8500305E
+:102D30000046202314600002AF82002CAF84002CD8
+:102D40008F82002C34048000034218210064182173
+:102D5000AF83003803E00008AF4200808F82001488
+:102D6000104000088F8200048F82FFCC14400005C1
+:102D70008F8200043C02FFBF3442FFFF0082202408
+:102D80008F82000430430006240200021062000F0C
+:102D90003C0201012C6200035040000524020004A3
+:102DA0001060000F3C0200010A00022E000000002B
+:102DB00010620005240200061462000C3C0201119E
+:102DC0000A000227008210253C0200110082102513
+:102DD000AF421000240200010A00022EAF82000C54
+:102DE00000821025AF421000AF80000C00000000F0
+:102DF000000000000000000003E0000800000000E8
+:102E00008F82000C10400004000000008F42100070
+:102E10000441FFFE0000000003E000080000000085
+:102E20008F8200102443F800000229C224A2FFF080
+:102E30002C63030110600003000210420A000255D7
+:102E4000AC8200008F83001800A3102B1440000BED
+:102E50000000382100A31023244600018F82001CAB
+:102E6000006210212442FFFF0045102B5440000453
+:102E70002402FFFF0A000255AC8600002402FFFF77
+:102E80000A00025AAC8200008C8200003C03080059
+:102E900024631C5C000211400043382103E0000859
+:102EA00000E010213C0908008D291D8000045140DC
+:102EB0003C19080027391C5C00C078210080602183
+:102EC000240EFFFF00003821015940211120003657
+:102ED000000030213C18080027181D983C0D080000
+:102EE00025AD1D9C000F582B0006118000461021B7
+:102EF000000218C0007810218C42000015820020CA
+:102F0000006D20218CA20000544000098D020018A1
+:102F10003C0208008C421D8424420001AC82000067
+:102F20003C010800AC221D840A0002CF00002021D1
+:102F30008F47002000003021000211C01160004ABC
+:102F4000AF4200208D08001C3C0900088CA3000043
+:102F50000066182100031880007A10210049102112
+:102F60008C44000024C600010068182100CF102BFB
+:102F70001440FFF6AC6400000A0002CD000000001F
+:102F80008C840000008E102B5040000424C60001E9
+:102F90000080702100C0382124C6000100C9102B18
+:102FA0001440FFD20006118024020001ACA20000F0
+:102FB0003C0208008C421D7C3C0308008C631D8091
+:102FC0000043102B1440002A2404FFFE0159102155
+:102FD0008C420018104000262404FFFF00072180C7
+:102FE0003C0508008CA51D84008720218D06001853
+:102FF000000420C03C02080024421D9800821021D9
+:103000003C03080024631D9CAC4C000024A5000177
+:10301000008318213C02080024421DA0AC6500007A
+:10302000000631C03C010800AC251D84008220212F
+:103030008F470020AD04001CAF46002011E0000ABD
+:10304000000030213C020008034228218CA200002D
+:1030500024C6000100CF182BAC82000024A5000478
+:103060001460FFFA24840004AF47002000002021F0
+:1030700003E00008008010213084FFFF30C6FFFF0E
+:1030800000052C0000A628253882FFFF00451021EE
+:103090000045282B0045102100021C023042FFFF92
+:1030A0000043102100021C023042FFFF00431021A8
+:1030B0003842FFFF03E000083042FFFF27BDFFC892
+:1030C000AFBF0030AFB3002CAFB20028AFB10024C7
+:1030D000AFB000203C0460088C8250002403FF7FC6
+:1030E0003C066000004310243442380CAC8250008F
+:1030F0008CC24C1C3C1A8000000216023042000FA9
+:1031000010400007AF82001C8CC34C1C3C02001F07
+:103110003442FC0000621824000319C2AF83001877
+:103120008F420008275B400034420001AF42000894
+:10313000AF8000243C02601CAF400080AF400084A0
+:103140008C4500088CC3080834028000034220210B
+:103150002402FFF0006218243C0200803C010800B9
+:10316000AC2204203C025709AF84003814620004EA
+:10317000AF850034240200010A000314AF8200145A
+:10318000AF8000142403003D240200043C01080029
+:10319000AC221D943C010800AC231D903C010800AA
+:1031A000AC231D8C3C010800AC231D883C13080097
+:1031B00026731C5C240400043C02080024421C7496
+:1031C000240300082463FFFFAC400004AC4000006F
+:1031D0000461FFFC24420020000410C000441021C0
+:1031E0002442003D3C010800AC221D902402000155
+:1031F0003C010800AC221D7C2402FFFF3C010800BA
+:10320000AC221D983C010800AC201D848F420000B8
+:1032100038420001304200011440FFFC8F8200144C
+:103220001040001600000000974201041040000505
+:103230008F830000146000072462FFFF0A00034B25
+:103240002C62000A2C620010504000048F830000A2
+:1032500024620001AF8200008F8300002C62000A0C
+:10326000144000032C6200070A000352AF80FFCC19
+:103270001040000224020001AF82FFCC8F430108FE
+:103280008F44010030622000AF830004104000082A
+:10329000AF8400103C0208008C42042C2442000140
+:1032A0003C010800AC22042C0A0006D73C02400076
+:1032B0003065020014A0000324020F0014820309E9
+:1032C00024020D0097420104104003713C024000AB
+:1032D00030624000144000AD8F8200388C440008FA
+:1032E0008F4201780440FFFE24020800AF420178BB
+:1032F00024020008A7420140A7400142974201046E
+:103300008F8400043051FFFF30820001104000071D
+:10331000022080212623FFFE240200023070FFFFDE
+:10332000A74201460A00037FA7430148A740014680
+:103330003C0208008C42043C1440000D8F830010B6
+:1033400030820020144000022403000924030001FD
+:10335000006020218F8300102402090050620001C8
+:1033600034840004A744014A0A00039A00000000C4
+:1033700024020F0014620005308200201440000671
+:103380002403000D0A0003992403000514400002E1
+:103390002403000924030001A743014A3C0208005A
+:1033A0008C4204203C0400480E00020A0044202500
+:1033B0000E000233000000008F82000C1040003E1F
+:1033C000000000008F4210003C0300200043102446
+:1033D000104000398F820004304200021040003655
+:1033E0000000000097421014144000330000000059
+:1033F000974210088F8800383042FFFF24420006B1
+:10340000000218820003388000E8302130430001B8
+:103410008CC4000010600004304200030000000D66
+:103420000A0003DB00E81021544000103084FFFF45
+:103430003C05FFFF00852024008518260003182B7B
+:103440000004102B00431024104000050000000071
+:10345000000000000000000D000000002400021C1D
+:103460008CC200000A0003DA004520253883FFFFE4
+:103470000003182B0004102B0043102410400005FB
+:1034800000000000000000000000000D000000002F
+:10349000240002258CC200003444FFFF00E8102104
+:1034A000AC4400003C0208008C420430244200017D
+:1034B0003C010800AC2204308F6200008F84003889
+:1034C000AF8200088C8300003402FFFF1462000FFB
+:1034D000000010213C0508008CA504543C040800A1
+:1034E0008C84045000B0282100B0302B00822021B1
+:1034F000008620213C010800AC2504543C01080052
+:10350000AC2404500A0006CD240400088C8200007C
+:10351000304201001040000F000010213C0508005F
+:103520008CA5044C3C0408008C84044800B028217D
+:1035300000B0302B00822021008620213C010800B1
+:10354000AC25044C3C010800AC2404480A0006CD1C
+:10355000240400083C0508008CA504443C04080031
+:103560008C84044000B0282100B0302B0082202140
+:10357000008620213C010800AC2504443C010800E1
+:10358000AC2404400A0006CD240400088F62000821
+:103590008F62000000021602304300F02402003067
+:1035A00010620005240200401062016B8F8200202F
+:1035B0000A0006D52442000114A000050000000006
+:1035C000000000000000000D000000002400025078
+:1035D0008F4201780440FFFE000000000E00023B15
+:1035E00027A40010144000050040802100000000C6
+:1035F0000000000D00000000240002578E020000B1
+:103600001040000500000000000000000000000D58
+:10361000000000002400025A8F62000C04430003E3
+:10362000240200010A00055DAE000000AE020000A9
+:103630008F8200388C450008A20000078F65000CBF
+:103640008F64000430A3FFFF0004240200852023C0
+:10365000308200FF004310212442000500028883CD
+:103660002E220081A605000A14400005A2040004D1
+:10367000000000000000000D0000000024000272A5
+:103680003C0708008CE71D808FA800102409FFFF6D
+:103690000000502110E00013000030213C0C080015
+:1036A000258C1D9C01802821000018218CA2FFFC84
+:1036B0005102002F006C18218CA400002463020822
+:1036C0000089102B1040000324A502080080482127
+:1036D00000C0502124C6000100C7102B5440FFF445
+:1036E0008CA2FFFC3C0508008CA51D803C02080054
+:1036F0008C421D7C3C09080025291C603C03080005
+:1037000024631D9800A2102B3C0C0800258C1D9CE6
+:103710003C0408008C841D843C0B0800256B1DA014
+:103720001040001A000831400005118000451021AA
+:10373000000210C000C9382124840001004B302150
+:103740000043182124A50001004C1021AC680000A2
+:10375000ACE600183C010800AC241D84AC44000019
+:103760003C010800AC251D800A0004A88E04001C42
+:103770003C0208008C421D84244200013C010800E8
+:10378000AC221D840A0004A7AC620000000A11806C
+:10379000004A1021000210C0004328218CA3000021
+:1037A000004C3821248400010003194000C9302155
+:1037B00000691821004B1021ACA80000AC60001873
+:1037C0003C010800AC241D84ACC20018ACE400002D
+:1037D0008E04001C8F8500380E0006E70220302181
+:1037E0008F6200048F430108A60200083C0210000B
+:1037F00000621824106000080000000097420104D5
+:10380000920300072442FFEC346300023045FFFFBF
+:103810000A0004BCA2030007974201042442FFF0FF
+:103820003045FFFF960600082CC2001354400005E7
+:10383000920300079202000734420001A20200072F
+:103840009203000724020001106200052402000315
+:103850001062000B30C7FFFF0A0004DB24E2000205
+:103860008F8200383C04FFFF8C43000C0064182456
+:1038700000651825AC43000C0A0004DA30C7FFFFCE
+:103880008F8200383C04FFFF8C4300100064182432
+:1038900000651825AC43001030C7FFFF24E200028A
+:1038A00000021083A20200058F830038304200FF1F
+:1038B00000021080004330218CC500008CC2000043
+:1038C0002403000400021702144300130000000048
+:1038D000974201043C03FFFF00A318243042FFFF7E
+:1038E000004710232442FFFE00622825ACC50000DB
+:1038F000920400058E03001C308200FF000210803D
+:1039000000431021904200003042000F004410217B
+:103910000A000510A20200068CC4000497420104AC
+:103920009603000A3085FFFF3042FFFF0047102357
+:103930002442FFD60002140000A22825ACC50004D2
+:1039400092020007920400052463002800031883F4
+:103950000064182134420004A2030006A2020007FA
+:103960008F8200042403FFFB344200020043102432
+:10397000AF820004920300068E07001C8F86003879
+:1039800000031880006710218C44000C3C02FFF6F5
+:103990003442FFFF0082282400661821AE04000C88
+:1039A000AC65000C920300068E04000C3C02FF7F05
+:1039B0003442FFFF0003188000A228240082202444
+:1039C00000671821AE04000CAC65000C92020006E2
+:1039D000000210800047102194450012AC450010F1
+:1039E000920200060002108000461021AC45001033
+:1039F0008FA20010920300050002114000031880FE
+:103A000000671821005320218C6200048C83001869
+:103A10001460000EAE0200143C0308008C631D8C81
+:103A2000AC8300183C0208008C421D900062102BF1
+:103A300010400019000000003C0208008C421D9458
+:103A4000006210213C010800AC221D8C8E0200187F
+:103A50008F48002000003021000211C01220000B0E
+:103A6000AF4200203C0200080342282100E0202150
+:103A70008C82000024C6000100D1182BACA20000EB
+:103A8000248400041460FFFA24A50004AF48002039
+:103A90000A00055E24020010000000000000000D76
+:103AA00000000000240002D424020010A7420140BC
+:103AB00024020002A7400142A7400144A742014658
+:103AC000974201043C0400082442FFFEA74201483B
+:103AD000240200010E00020AA742014A9603000ACE
+:103AE00092020004004310212442000230420007E9
+:103AF00000021023304200070E000233AE02001015
+:103B00008F6200003C0308008C630444240400100E
+:103B1000AF820008974201043042FFFF2442FFFEBB
+:103B200000403821000237C33C0208008C420440A8
+:103B3000006718210067282B00461021004510213E
+:103B40003C010800AC2304443C010800AC220440C2
+:103B50000A0006620000000014A00005000000003A
+:103B6000000000000000000D00000000240003041D
+:103B70008F4201780440FFFE000000000E00023B6F
+:103B800027A400141440000500408021000000001C
+:103B90000000000D000000002400030B920600044A
+:103BA0008FA4001427A50018000630820E00025CC6
+:103BB000AFA00018504000068E0200000000000078
+:103BC0000000000D00000000240003118E02000020
+:103BD0005440000692020007000000000000000DA3
+:103BE0000000000024000316920200073042000487
+:103BF000104000058F8200042403FFFB34420002C2
+:103C000000431024AF8200048F62000404430009C3
+:103C100092020007920200068E03001C8E04000C24
+:103C20000002108000431021AC44000CAE000000E4
+:103C300092020007304200045440000B920300043B
+:103C4000920300058E0400148E05001C00031880EA
+:103C50003C0200010082202100651821AE040014FE
+:103C6000AC640004920300049602000A0062102172
+:103C700024420005000290838FA200181040000D1E
+:103C8000277100088FA40014000310820242302321
+:103C900027A500180E00025CAFA2001850400006D5
+:103CA0008E05001C000000000000000D0000000058
+:103CB0002400033F8E05001C022020210E0006E791
+:103CC00002403021920400068F6500043C027FFF11
+:103CD00000042080009120218C8300043442FFFFE7
+:103CE00000A2282400651821AC830004920200077A
+:103CF00092030004920500053042000410400014B5
+:103D00009607000830A500FF0005288000B1282193
+:103D10008CA40004974201049606000A306300FF59
+:103D20003042FFFF004310210046102130E3FFFF27
+:103D3000004310232442FFD83084FFFF0002140008
+:103D400000822025ACA400040A0006169203000796
+:103D500030A500FF0005288000B128218CA40000B8
+:103D600097420104306300FF3042FFFF00431021FF
+:103D7000004710233C03FFFF008320243042FFFF55
+:103D800000822025ACA40000920300072402000159
+:103D900010620006000000002402000310620011FF
+:103DA000000000000A0006398E030010974201044B
+:103DB000920300049605000A8E24000C0043102193
+:103DC000004510212442FFF23C03FFFF0083202422
+:103DD0003042FFFF00822025AE24000C0A00063985
+:103DE0008E03001097420104920300049605000A16
+:103DF0008E24001000431021004510212442FFEEC4
+:103E00003C03FFFF008320243042FFFF0082202577
+:103E1000AE2400108E0300102402000AA7420140C5
+:103E2000A74301429603000A920200043C040040AA
+:103E300000431021A7420144A740014697420104D4
+:103E4000A7420148240200010E00020AA742014ACB
+:103E50000E000233000000008F6200009203000495
+:103E600000002021AF820008974201049606000A54
+:103E70003042FFFF00621821006028213C03080047
+:103E80008C6304443C0208008C4204400065182105
+:103E9000004410210065382B004710213C01080028
+:103EA000AC2304443C010800AC220440920400040A
+:103EB000008620212484000A3084FFFF0E0001E7E1
+:103EC00000000000974401043084FFFF0E0001F55C
+:103ED000000000003C021000AF4201780A0006D446
+:103EE0008F8200201482002730620006974201046E
+:103EF000104000673C024000306240001040000566
+:103F000000000000000000000000000D00000000A4
+:103F10002400041A8F4201780440FFFE24020800A6
+:103F2000AF42017824020008A7420140A7400142A5
+:103F30008F820004974301043042000110400007C3
+:103F40003070FFFF2603FFFE24020002A742014655
+:103F5000A74301480A00068C2402000DA740014631
+:103F60002402000DA742014A8F62000024040008C9
+:103F7000AF8200080E0001E7000000000A0006669C
+:103F800002002021104000423C02400093620000E9
+:103F9000304300F02402001010620005240200707B
+:103FA000106200358F8200200A0006D524420001ED
+:103FB0008F620000974301043050FFFF3071FFFF14
+:103FC0008F4201780440FFFE3202000700021023F6
+:103FD000304200072403000A2604FFFEA7430140E5
+:103FE000A7420142A7440144A7400146A751014806
+:103FF0008F420108304200201440000224030009CF
+:1040000024030001A743014A0E00020A3C040040B9
+:104010000E000233000000003C0708008CE7044457
+:10402000021110212442FFFE3C0608008CC6044009
+:104030000040182100E33821000010218F650000A6
+:1040400000E3402B00C230212604000800C83021C4
+:104050003084FFFFAF8500083C010800AC27044412
+:104060003C010800AC2604400E0001E700000000FF
+:104070000A000666022020210E000139000000001F
+:104080008F82002024420001AF8200203C024000C9
+:10409000AF4201380A000336000000003084FFFF01
+:1040A00030A5FFFF0000182110800007000000006D
+:1040B00030820001104000020004204200651821F7
+:1040C0000A0006DD0005284003E00008006010211A
+:1040D00010C0000624C6FFFF8CA2000024A5000427
+:1040E000AC8200000A0006E72484000403E0000814
+:1040F0000000000010A0000824A3FFFFAC86000011
+:1041000000000000000000002402FFFF2463FFFF06
+:104110001462FFFA2484000403E000080000000099
+:04412000000000019A
+:0C4124000A00002A00000000000000005B
+:104130000000000D747870352E302E306A39000082
+:10414000050000000000000A000001360000EA60DF
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:10417000000000000000000000000000000000003F
+:104180000000000000000016000000000000000019
+:10419000000000000000000000000000000000001F
+:1041A000000000000000000000000000000000000F
+:1041B0000000000000000000000000000000138864
+:1041C00000000000000005DC00000000000000000E
+:1041D00010000003000000000000000D0000000DB2
+:1041E0003C020800244238603C03080024633B146E
+:1041F000AC4000000043202B1480FFFD244200044B
+:104200003C1D080037BD7FFC03A0F0213C100800D6
+:10421000261000A83C1C0800279C38600E000407EC
+:10422000000000000000000D8F86003C3C03900061
+:104230003C0280000086282500A32025AC440020F5
+:104240003C0380008C67002004E0FFFE00000000BB
+:1042500003E00008000000000A00004124040001FF
+:104260008F85003C3C0480003483000100A31025AE
+:1042700003E00008AC82002003E0000800001021E9
+:104280003084FFFF30A5FFFF1080000700001821D9
+:104290003082000110400002000420420065182115
+:1042A0001480FFFB0005284003E000080060102197
+:1042B00010C00007000000008CA2000024C6FFFF11
+:1042C00024A50004AC82000014C0FFFB2484000479
+:1042D00003E000080000000010A0000824A3FFFF76
+:1042E000AC86000000000000000000002402FFFF78
+:1042F0002463FFFF1462FFFA2484000403E0000833
+:104300000000000090AA00318FAB00108CAC004080
+:104310003C0300FF8D680004AD6C00208CAD0044B0
+:1043200000E060213462FFFFAD6D00248CA70048DF
+:104330003C09FF000109C024AD6700288CAE004C89
+:104340000182C82403197825AD6F0004AD6E002CDE
+:104350008CAD0038314A00FFAD6D001C94A90032CD
+:104360003128FFFFAD68001090A70030A560000263
+:10437000A1600004A167000090A30032306200FF3A
+:104380000002198210600005240500011065000E6E
+:104390000000000003E00008A16A00018CD800289A
+:1043A000354A0080AD7800188CCF0014AD6F001432
+:1043B0008CCE0030AD6E00088CC4002CA16A0001C8
+:1043C00003E00008AD64000C8CCD001CAD6D00183E
+:1043D0008CC90014AD6900148CC80024AD680008B5
+:1043E0008CC70020AD67000C8CC200148C83007059
+:1043F0000043C82B13200007000000008CC20014EB
+:10440000144CFFE400000000354A008003E000087F
+:10441000A16A00018C8200700A0000B70000000051
+:104420009089003027BDFFF88FA8001CA3A90000C9
+:104430008FA300003C0DFF8035A2FFFF8CAC002C49
+:1044400000625824AFAB0000A100000400C0582156
+:10445000A7A000028D06000400A048210167C82122
+:104460008FA50000008050213C18FF7F032C2026E0
+:104470003C0E00FF2C8C0001370FFFFF35CDFFFFF6
+:104480003C02FF0000AFC82400EDC02400C2782425
+:10449000000C1DC00323682501F87025AD0D000038
+:1044A000AD0E00048D240024AFAD0000AD04000863
+:1044B0008D2C00202404FFFFAD0C000C954700322A
+:1044C00030E6FFFFAD0600109145004830A200FF26
+:1044D000000219C2506000018D240034AD040014A4
+:1044E0008D4700388FAA001827BD0008AD0B0028A3
+:1044F000AD0A0024AD07001CAD00002CAD00001873
+:1045000003E00008AD00002027BDFFE0AFB20018B7
+:10451000AFB10014AFB00010AFBF001C90980030D6
+:1045200000C088213C0D00FF330F007FA0CF0000AA
+:10453000908E003135ACFFFF3C0AFF00A0CE000199
+:1045400094A6001EA22000048CAB00148E29000447
+:1045500000A08021016C2824012A402400809021A1
+:1045600001052025A6260002AE2400042605002011
+:10457000262400080E000063240600029247003043
+:10458000260500282624001400071E000003160339
+:1045900024060004044000032403FFFF9659003260
+:1045A0003323FFFF0E000063AE23001026240024F7
+:1045B0008FBF001C8FB200188FB100148FB0001095
+:1045C00024050003000030210A00006D27BD0020F3
+:1045D00027BDFFD8AFB1001CAFB00018AFBF00209F
+:1045E00090A900302402000100E050213123003F57
+:1045F00000A040218FB000400080882100C04821E9
+:10460000106200148FA70038240B000500A02021A1
+:1046100000C02821106B0013020030210E0000F9A9
+:10462000000000009225007C30A4000210800003EE
+:1046300026030030AE000030260300348FBF002078
+:104640008FB1001C8FB000180060102103E000083B
+:1046500027BD00280E000078AFB000100A0001400E
+:10466000000000008FA3003C010020210120282130
+:1046700001403021AFA300100E0000BFAFB0001406
+:104680000A000140000000003C0580008CA30E10D1
+:104690008F840044AC8300208CA20E1803E0000835
+:1046A000AC8200243C0580008CA30E148F8400444F
+:1046B000AC8300208CA20E1C03E00008AC82002416
+:1046C0009382000C1040001B2483000F2404FFF091
+:1046D0000064382410E00019978B00109784000EB6
+:1046E0009389000D3C0A601C0A00017B0164402391
+:1046F00001037021006428231126000231C2FFFF4C
+:1047000030A2FFFF0047302B50C0000E00E44821CC
+:104710008D4D000C31A3FFFF00036400000C2C033F
+:1047200004A1FFF30000302130637FFF0A00017312
+:104730002406000103E00008000000009784000E3A
+:1047400000E448213123FFFF3168FFFF0068382B68
+:1047500054E0FFF8A783000E938A000D1140000576
+:10476000240F0001006BC023A380000D03E00008AC
+:10477000A798000E006BC023A38F000D03E0000874
+:10478000A798000E03E000080000000027BDFFE826
+:10479000AFB000103084FFFF3C10800093A8002BC6
+:1047A000AFBF0014A6040144960A0E1630C600FFDF
+:1047B0008FA90030A60A0146AE050148A2060152A3
+:1047C000A608015AAE0701608FA3002CA609015864
+:1047D000012020210E000167AE0301543C021000AD
+:1047E000AE0201788FBF00148FB0001003E0000804
+:1047F00027BD00188F8500002484000727BDFFF81F
+:104800003084FFF83C06800094CB008A316AFFFFB9
+:10481000AFAA00008FA90000012540232507FFFF54
+:1048200030E31FFF0064102B1440FFF7000568827F
+:10483000000D288034CC400000AC102103E00008BB
+:1048400027BD00088F8200002486000730C5FFF8CE
+:1048500000A2182130641FFF03E00008AF840000AD
+:104860008F8500448F8A003C27BDFFB03C04800048
+:10487000AFB70044AFB40038AFB1002CAFBF0048B1
+:10488000AFB60040AFB5003CAFB30034AFB20030BC
+:10489000AFB000288C8701048CA90024AC8A00806A
+:1048A0008CA8002000E988230000B821AC880E10F5
+:1048B0008CA600240000A021AC860E188C820E105D
+:1048C000AC820E148C830E18AC830E1C122000FBDD
+:1048D0003C168000936B0008116000F1000000009E
+:1048E000976E001031CDFFFF022D602B158000EC7C
+:1048F0000000000097700010320FFFFFAECF0E00D7
+:104900003C0580008CB30000327200081240FFFDAD
+:104910000000000094B50E088CA70E0432A5FFFF1E
+:1049200030B40001128000E1000000000000000D22
+:1049300030B9A040241800401338011730B4A0004B
+:10494000128000DC00000000937300081260000871
+:1049500000000000976900103122FFFF00E2202BC9
+:104960001080000330A6004010C000D200000000FC
+:10497000A7850040AF870038936A000802203821DD
+:10498000AFB10020154000F127B40020AF60000C4B
+:104990009785004030B14000162000022403001625
+:1049A0002403000E24154007A363000AAF7500140A
+:1049B000939000428F6F0014321900010019C24019
+:1049C00001F84025AF680014978700408F630014FA
+:1049D00030EE0010006E6825AF6D0014978C00401B
+:1049E000318B000811600165000000008F65001424
+:1049F0003C0B10003C0A800000AB8825AF7100140E
+:104A000095460E0A3C0981002413000E30C2FFFFB8
+:104A100000492025AF640004A3730002937F000ABD
+:104A20003406FFFC27F20004A372000A978D0040B1
+:104A300031AC200011800157000000003C078000CD
+:104A4000978D004094EC0E0C97910040000D584259
+:104A50003185C000316A00030005130332291000BC
+:104A600001429825000922030264F825001F90C026
+:104A7000A7720012979500409379000A0015818271
+:104A80003218003C0319782125E8003CA36800098E
+:104A900094EE0E0C31C33FFFA76300109763001222
+:104AA0009367000900E3702125CD000231AC0007B7
+:104AB000000C582331650007A365000B93710009B2
+:104AC00097640012976A0010322200FF8F9100381D
+:104AD000979F004000444821012A982102669021B6
+:104AE00033F5004012A000053246FFFF00D1402BF5
+:104AF0003C12800011000016000098210226782B3D
+:104B000015E001368FA700203C1880008F100E148E
+:104B10003C058000AF100E108F190E1CAF190E1837
+:104B2000AF060E008CB200003255000812A0FFFD47
+:104B30000000000094BF0E0800C0882100009021F2
+:104B4000A79F00408CA60E0424130001AF860038F6
+:104B5000976900103135FFFF8E8C000001912023F2
+:104B600010800118AE8400009367000814E000D89C
+:104B7000000000000E0001B4240400108F8E0048D5
+:104B80003C0332000040282131C600FF00063C00F3
+:104B900000E3602525CD0001AF8D0048AC4C00003E
+:104BA0009362000997640012937F000A304A00FF65
+:104BB000308BFFFF014B48210009CC0033F000FF90
+:104BC0000330C025ACB800048F8F004897880040A0
+:104BD0003103200010600103ACAF0008976F001292
+:104BE00031E8FFFF06400101ACA8000C979000409F
+:104BF0003205000814A0000226280006262800021C
+:104C00003C048000948B0E148C850E1C8F6700046E
+:104C1000936A00023164FFFF314900FFAFA9001021
+:104C20008F7F0014AFA80018AFBF00140E00019AC8
+:104C300000000000240400100E0001C80000000065
+:104C40008E92000016400005000000008F790014CD
+:104C50002405FFBF0325A024AF7400148F69000C46
+:104C60000135F821AF7F000C9375000816A00008ED
+:104C70000000000012600006000000008F6B0014AE
+:104C80003C0CEFFF3584FFFE01645024AF6A001432
+:104C9000A37300088FA700200A000316022020211A
+:104CA000AED10E000A0001F83C05800014E0FF219F
+:104CB00030B9A0400E0001600000A0212E9100013B
+:104CC0000237B02512C000178FBF00488F85003C07
+:104CD00024170F0010B700CD3C0480008C99017898
+:104CE0000720FFFE24150F0050B500EB3C048000A8
+:104CF0008C890E14240502403C141000AC89014438
+:104D00008C9F0E1CAC9F0148A0800152A480015AC8
+:104D1000AC800160A4800158AC850154AC9401784A
+:104D20008FBF00488FB700448FB600408FB5003C5E
+:104D30008FB400388FB300348FB200308FB1002CA5
+:104D40008FB0002803E0000827BD00508F91003885
+:104D5000979300403C1280000220A821326A004054
+:104D60001540FF7D00009821976B00108F8500385B
+:104D70003162FFFF104500A2000020210080A02129
+:104D8000108000E500E088211620FED2000000001F
+:104D90000A0002E72E9100013C0380008C7F01781D
+:104DA00007E0FFFE240408008F860000AC64017851
+:104DB0003C038000946C008A318BFFFF0166502316
+:104DC0002549FFFF31281FFF2D0200081440FFF97D
+:104DD000000000008F8E0048346F40008F83003C3D
+:104DE00000E0A021240D0F0025C70001AF87004877
+:104DF00000CF3021023488233C08800031D500FFE9
+:104E0000106D0005240700019393004232720001E7
+:104E10000012824036070001001514003C09010011
+:104E200000492025ACC400008F9F004830B90036EF
+:104E300030B80008ACDF00041300009000F998259A
+:104E400095070E0A8F8E00003C03810030EDFFFFB6
+:104E500025CB000801A328253C0C1000316A1FFF58
+:104E6000269200062406000EAD050160026C98250E
+:104E7000A506015AAF8A0000A512015816200008A5
+:104E80003C1080008F99003C24180F00533800021A
+:104E900024170001367300400E0001593C108000B9
+:104EA0008E1F0E1402402021AE1F01448E120E1CD4
+:104EB000AE120148A2150152AE1301540E00016753
+:104EC0003C151000AE1501780A000319000000001F
+:104ED00093780009976300129368000B330F00FF6B
+:104EE00001E33821310200FF00E2702125D0000AE1
+:104EF0003210FFFF0E0001B4020020218F8600480F
+:104F00003C1941003C07800024CD0001AF8D0048D2
+:104F1000936C00099764001230C600FF318A00FFCD
+:104F2000308BFFFF014B482100062C00253F00027B
+:104F300000BFC02503197825AC4F00008F68000C16
+:104F400094EE0E1401121825AC4300048CE50E1CDF
+:104F50008F670004936D000231C4FFFF31AC00FF86
+:104F6000AFAC00108F620014AFB100180E00019AB0
+:104F7000AFA200140A0002C502002021AF600004A5
+:104F8000A3600002978D004031AC20001580FEAB7D
+:104F900000003021A7600012979000409378000A2B
+:104FA0003C03800032191F000019798301F8402169
+:104FB00025070028A3670009946E0E0C0A00025E04
+:104FC000A76E00108F6E001435CD00400E00015901
+:104FD000AF6D00140A000291000000000A000316E1
+:104FE000000020210641FF01ACA0000C8CB8000C91
+:104FF0003C198000031990250A0002B2ACB2000CE3
+:10500000000090210A00028D241300011280000587
+:105010003C0D800095A60E0830D30040126000427F
+:10502000000000008C9001780600FFFE00000000E8
+:1050300094920E103C030500240720003258FFFF15
+:1050400003037825AC8F014C8C880E143C0E1000A5
+:10505000AC8801448C820E1CAC820148A0800152B5
+:10506000A480015AAC800160A4800158AC8701542F
+:10507000AC8E01780A0002EE3C0480008F900000A4
+:1050800026920002A5120158260F000831E81FFFE2
+:105090000A000356AF880000AC80014C1280001952
+:1050A000000000008C8A0E10AC8A01448C830E181C
+:1050B0003C0C800024160040AC8301488FBF0048A0
+:1050C000A18001528FB70044A580015A8FB5003CE2
+:1050D000AD8001608FB40038A58001588FB30034D3
+:1050E000AD9601548FB200308FB600408FB1002CC6
+:1050F0008FB000283C04100027BD005003E00008DA
+:10510000AD8401788C8B0E14AC8B01448C830E1C07
+:105110000A0003E43C0C80000E0001602E910001A7
+:105120000A0002E80237B025000000000000000D70
+:10513000000000002400033A0A0003C03C04800081
+:1051400027BDFFE0AFBF001C3C1F20FF3C076000F5
+:105150003C0980002402001037F9FFFDACE2300862
+:10516000AFB20018AFB10014AFB00010AD390E00EF
+:10517000000000000000000000000000000000002F
+:10518000000000003C1800FF3712FFFDAD320E009A
+:105190003C0B60048D7050002411FF7F3C0E000218
+:1051A0000211782435EC380C35CD0109ACED4C18E2
+:1051B000240A0009AD6C50008CE80438AD2A0008C0
+:1051C000AD2000148CE54C1C3106FFFF38C42F7154
+:1051D00000051E023062000F2486C0B31040000795
+:1051E000AF8200088CE54C1C3C09001F3528FC00F0
+:1051F00000A81824000321C2AF8400048CF1080821
+:105200003C0F57092412F0000232702435F00010D0
+:1052100001D0602601CF68262DAA00012D8B000148
+:10522000014B382550E00009A380000C3C02601CB3
+:105230008C590008241F0001A39F000C33387C0008
+:10524000A7980010A780000EA380000DAF80004833
+:1052500014C00003AF8000003C066000ACC0442CCA
+:105260000E0004B63C1080000E000DDF00000000B0
+:105270003C110800263138C83C1208002652394833
+:105280008E05000038A30001306400011480FFFC8B
+:10529000000000008E0601003C0C800A240AFF80FA
+:1052A00024C7024030EB007F016C482100EA402413
+:1052B000AE060020AF890044AE0800243C03800005
+:1052C000AF86003C8C6D017805A0FFFE2419080014
+:1052D000AC79017890780108A3980042938F00423E
+:1052E00031EE000111C0000F240D0D0024C2F800A2
+:1052F0002C5F030113E0001C000629C224A3FFF069
+:1053000000032042000431400E0001CF00D1D8211B
+:105310003C0440003C068000ACC401380A0004573D
+:105320000000000010CD0026240E0F0010CE002A31
+:105330003C028008345F008093F90000240F005085
+:10534000333800FF170FFFF33C0440000E00091232
+:10535000000000003C0440003C068000ACC4013862
+:105360000A000457000000008F83000400A3402BB4
+:105370001500000B8F8B0008006B50212547FFFFA5
+:1053800000E5482B1520000600A36023000C2940EF
+:105390000E0001CF00B2D8210A00047C3C0440007A
+:1053A000000000000000000D00000000240003AD1C
+:1053B0000E0001CF000000000A00047C3C04400005
+:1053C0003C1B0800277B3A480E0001CF000000007C
+:1053D0000A00047C3C0440003C1B0800277B3A6820
+:1053E0000E0001CF000000000A00047C3C044000D5
+:1053F000000411C003E00008244202403C040800FD
+:1054000024843AAC2405001A0A00006D0000302103
+:1054100027BDFFE0AFBF001CAFB20018AFB1001452
+:10542000AFB000103C108000920B01092412FF80E5
+:105430000E0004B33164007F8F91003C0051502175
+:1054400001524024AE080024920301090E0004B367
+:105450003064007F24060080240700C0240400403C
+:10546000AE000810AE040814AE060818AE07081CFB
+:10547000920C01090051F82133F8007F3C19800A91
+:10548000031910213184007F0E0004B3AF82004461
+:105490008E1101003C0C008035850001022278212C
+:1054A00001F24824AE0908048E0E0100359800026E
+:1054B0003609090001C2682131AB00780165502529
+:1054C000AE0A08208E0501008E080100360509800D
+:1054D000010218212464004000923024AE0608081E
+:1054E0008E07010000E2F82127F9004033320078EE
+:1054F00002588825AE1108248E040100952F000C57
+:105500008FBF001C8FB2001831EEFFFF000E69C084
+:10551000AE0D0800AE0C0828952B000C8FB10014BE
+:10552000316AFFFF000A41C0AE08002C8CA3005076
+:105530008FB000108CA2003C8D2400048CA6001CAF
+:105540008CA7003827BD0020AF830060AF820050D9
+:10555000AF84004CAF86005803E00008AF87005CC2
+:105560003C0A0800914A3AD13C09080095293ACAF8
+:105570003C051100000A3C002528000200E8302507
+:1055800000C5182524820008AC83000003E0000851
+:10559000AC8000043C098000352809009107001107
+:1055A000240200280080502130E300FF00A0682181
+:1055B00000C0602110620002340B86DD240B08005D
+:1055C0003C07800034E20A9A9443000034F80A9CB5
+:1055D00034E60AA03079FFFFAD5900008F0F0000BC
+:1055E00034E80A8024040001AD4F00048CCE000092
+:1055F000AD4E00089105001930A300031064004669
+:1056000028690002152000B52404000210640090EF
+:10561000240500031065009B34E40AA43C0908003B
+:1056200095293AC024070800516700503C188000B3
+:105630003C0280003459090093280012932E00196F
+:1056400034580980310F00FF8F06002801EC182123
+:10565000000338803124FFFF31CB00FF00E410212C
+:10566000000B2D0000A6C02500027C003C08600055
+:105670000308182535E906FFAD430000AD490004D5
+:105680008F2E002C3C0380003478093CAD4E00087E
+:105690008F27003025490028346E0900AD47000CE3
+:1056A0008F2B0034AD4B00108F240038AD44001414
+:1056B0008F25001CAD4500188F220020AD42001C34
+:1056C0008F26002425220014AD4600208F280028B4
+:1056D000AD4800248F0F0000AD2D0004AD2F000059
+:1056E0008C64010CAD24000891C700123C05080031
+:1056F00090A53AD0AD20001030EB00FF016C3021B6
+:1057000000066F000005CC0001B96025358AFFFF57
+:1057100003E00008AD2A000C3C09080095293AC0B6
+:105720003C19080097393ACA34E20AA43C0608003A
+:1057300094C63ABC944F00003123FFFF0323C021DD
+:1057400003067023000F3C0025C8FFF200E828255F
+:1057500024070800AD45000CAD400010AD4B00140F
+:105760001567FFB3254A00183C1880003708090068
+:10577000910F00119107001937030A8031EE00FFE5
+:105780003C19080097393AC6946F002A000E5882D7
+:1057900030E400FF97870054000B160000042C0033
+:1057A0003126FFFF0326C02100454825013870251A
+:1057B00001E758213C03400001C32025000B2C00C9
+:1057C000AD440000AD450004910200183C060006FF
+:1057D0003C0380000002CE000326C025AD5800081F
+:1057E0008D0F002C3478093C24E90001AD4F000CEA
+:1057F0008D0B001C312E7FFF25490014AD4B00108E
+:105800008F0F0000AD2D0004A78E0054AD2F0000B7
+:105810008C64010C346E090025220014AD240008AC
+:1058200091C700123C05080090A53AD0AD200010A9
+:1058300030EB00FF016C302100066F000005CC004A
+:1058400001B96025358AFFFF03E00008AD2A000C8E
+:1058500034E90AA495240000950200283C090800B8
+:1058600095293AC000041C000002CC003478810065
+:10587000032B7825AD58000CAD4F00100A000540F1
+:10588000254A00143C09080095293AC03C05080047
+:1058900094A53ACA3C06080094C63ABC9499000004
+:1058A0003123FFFF9518002800A31021004678231C
+:1058B00000193C000018440025EEFFEE010E2825DB
+:1058C00034E48100AD44000CAD450010AD4000143F
+:1058D000AD4B00180A000540254A001C1460FF4F1C
+:1058E00034E60AA494CE00003C09080095293AC089
+:1058F000000E4400010B3825AD47000C0A0005409E
+:10590000254A001003E00008240207D027BDFFE06D
+:10591000AFB20018AFB10014AFB00010AFBF001CA1
+:105920000E00004D008088218F8800508F87004C2A
+:105930003C05800834B20080011128213C10800011
+:1059400024020080240300C000A72023AE02081810
+:105950003C068008AE03081C18800004AF85005088
+:10596000ACC500048CC90004AF89004C12200009AA
+:10597000360409800E0005F800000000924C002754
+:105980008E0B007401825004014B3021AE46000C96
+:10599000360409808C8E001C8F8F005801CF68233D
+:1059A00019A000048FBF001C8C90001CAF90005801
+:1059B0008FBF001C8FB200188FB100148FB0001081
+:1059C0000A00004F27BD00208F8600608F830050A3
+:1059D0008F82004C3C05800834A40080AC860050C7
+:1059E000AC83003C03E00008ACA200043C030800C8
+:1059F0008C63005427BDFFF8308400FF246200014F
+:105A000030A500FF3C010800AC22005430C600FF66
+:105A10003C0780008CE801780500FFFE3C0A7FFF10
+:105A2000A3A400038FA400003549FFFF00891824B8
+:105A3000000647C000681025AFA2000090F9010AD7
+:105A4000A3A000023C1880FFA3B900018FAE0000A4
+:105A500030AD007F370FFFFF01CF5824000D6600E7
+:105A60003C090020016C5025352620002405FF80CC
+:105A70003C04100027BD0008ACEA014CACE6015420
+:105A8000A4E00158A0E5015203E00008ACE401786D
+:105A9000308800FF3C03800030A400FF8C62017856
+:105AA0000440FFFE000000003C03800034660A0052
+:105AB0008CCA0020346709800004482BAC6A01447A
+:105AC0008CC5002400091540AC650148A068015050
+:105AD00090E4004CA064016D03E00008A46001584C
+:105AE00027BDFFE8308400FFAFBF00100E00065B4B
+:105AF00030A500FF8F8300508FBF00103C05800051
+:105B0000344600402404FF903C02100027BD0018DA
+:105B1000ACA3014CA0A40152ACA6015403E00008C0
+:105B2000ACA2017827BDFFE03C088008AFBF001C95
+:105B3000AFB20018AFB10014AFB000103510008044
+:105B40008E0600183C078000309200FF00C7202519
+:105B5000AE0400180E00004D30B100FF92030005A6
+:105B6000346200080E00004FA2020005024020210E
+:105B70000E00066F02202821024020218FBF001C4A
+:105B80008FB200188FB100148FB0001024050005EB
+:105B9000240600010A00063227BD00203C058000D3
+:105BA00034A309809066000830C200081040000F3E
+:105BB0003C0A01013549080AAC8900008CA8007430
+:105BC000AC8800043C07080090E73AD030E50010AC
+:105BD00050A00008AC8000083C0D800835AC008067
+:105BE0008D8B0058AC8B00082484000C03E0000867
+:105BF000008010210A0006B22484000C27BDFFE8B3
+:105C00003C088000AFB00010AFBF0014350609801B
+:105C100090C70009240200063509090030E300FF9F
+:105C20000080802100A06021240B00041062007914
+:105C30002407000294CF005C3C0E020431EDFFFF0C
+:105C400001AE5025AE0A000090C5000830A4002027
+:105C5000108000080000000090C2004E3C1F0103AD
+:105C600037F90300305800FF03193025240B0008D2
+:105C7000AE06000491390011912600129124001102
+:105C8000333800FF0018708230CF00FF01CF502161
+:105C9000014C6821308800FF31AAFFFF390300283A
+:105CA000000A28801460002B020540239124001272
+:105CB0003C0E800035D90980308500FF00AC1821EA
+:105CC00000031080004BF821001F8400360906FFF6
+:105CD000AD09000435C9090091260011912F001269
+:105CE000000BC0828F2B003431ED00FF8DC4010CFE
+:105CF00001AC282100B810210164F82300078400BA
+:105D000000021F000070C82533E9FFFF30CF00FC00
+:105D1000032970250158202101E8682100045080E2
+:105D2000ADAE000C0E00004D010A80213C0780083A
+:105D3000240C000434EB00800E00004FA16C00091D
+:105D4000020010218FBF00148FB0001003E0000884
+:105D500027BD001891250011912300193C18080057
+:105D600097183AC630A200FF0002F882307000FF98
+:105D7000001FCE0000104C000329302500D87025EC
+:105D80003C0F400001CF68253C0E8000AD0D0000A7
+:105D900035C9090091260011912F001235D90980CB
+:105DA000000BC08231ED00FF8F2B00348DC4010C3D
+:105DB00001AC282100B810210164F82300078400F9
+:105DC00000021F000070C82533E9FFFF30CF00FC40
+:105DD000032970250158202101E868210004508022
+:105DE000ADAE000C0E00004D010A80213C0780087A
+:105DF000240C000434EB00800E00004FA16C00095D
+:105E0000020010218FBF00148FB0001003E00008C3
+:105E100027BD00180A0006C42407001227BDFFD0C2
+:105E2000AFB50024AFB40020AFB3001CAFB000107A
+:105E3000AFBF0028AFB20018AFB100143C0680001D
+:105E400090C3010B309300FF30B400FF306200308C
+:105E50000000A821104000820000802134C4098085
+:105E60009088000800083E0000072E0304A000A947
+:105E7000240400048F8700503C010800A0243AD07D
+:105E80003C0C8000AD8000483C038000906E010B0C
+:105E900031C5002010A000073C0C80003478098038
+:105EA0009312000800128E0000117E0305E000AE80
+:105EB0003C028008918B010B3586098090C4000854
+:105EC000316A0040000A482B308800082411000382
+:105ED0001500000200E99023000088213C038000A7
+:105EE00034780A80346A09009707002C9144001125
+:105EF0009149001293050018309F00FF312800FFE0
+:105F0000022810210002C880930D0018033F782159
+:105F100001F0702130B000FF01D01821A787005494
+:105F20003C010800A42E3AC63C010800A4233AC84C
+:105F300015A00003246B000A0000000D246B000A6A
+:105F40003170FFFF3C010800A4233ACA3C0108005D
+:105F5000A4203AC03C010800A4203ABC0E0001B4C1
+:105F6000020020210E00050F0040202100402021CA
+:105F7000024028210E00051C022030210E00069E42
+:105F80000040202116A0005F004020210E0001C823
+:105F9000020020213C11080092313AD03235000332
+:105FA00012A000163C0A80088F8700503C0E800823
+:105FB00035CD008024EC0001ADAC003C3C058008F0
+:105FC0008CA600040180202100CC90231A400002FE
+:105FD000AF8C00508CA400040E0005F8ACA40004A3
+:105FE0003C1980008F3800743C0F800835F0008029
+:105FF00000582821AE05000C3C0A8008354200807C
+:106000000260202102802821A040006B0E00065B68
+:106010003C1380008F840050345F0006AE64014C56
+:106020008F8800483C1410008FB50024250900011A
+:10603000AF8900488FB20018A26801528FB10014D6
+:10604000AE7F01548FB00010AE7401788FBF00286E
+:106050008FB400208FB3001C03E0000827BD003080
+:1060600034C30980906F0008000F7600000E6E03A5
+:1060700005A0003334C209009059001B241F0010F2
+:106080003C010800A03F3AD0333800021300FF7EE5
+:106090008F8700508F83005C1467FF7C3C03800077
+:1060A0000E00004D000000003C09800835250080EE
+:1060B00090A4000924070016308800FF1107000D86
+:1060C0000000000090A600093C0C0800918C3AD01A
+:1060D000240A000830C400FF358B00013C01080091
+:1060E000A02B3AD0108A002F240D000A108D002812
+:1060F0002402000C0E00004F000000000A000759A7
+:106100008F8700500E0006B6022028210A00079A49
+:10611000000000003C0B8008356A00808D47005469
+:106120008CC9010C1120FF54AF87005024060014C5
+:106130003C010800A0263AD00A0007583C0C800019
+:1061400090710008241200023C010800A0323AD0ED
+:10615000323000201200000B241500018F87005000
+:106160000A00075924100008345900808F23003892
+:10617000AC4300048C5F0004AF3F003C0A0007649E
+:106180003C0C80008F8700500A000759241000043F
+:10619000A0A200090E00004F000000000A000759ED
+:1061A0008F870050240200140A00081CA0A20009D6
+:1061B00027BDFFE8AFBF0014AFB000103C10800057
+:1061C00092020109240500010E00065B304400FF25
+:1061D0003C1F800893F8000E37E3008093F9000F0E
+:1061E000906E002693E9000A332F00FF0018660026
+:1061F000000F6C0031CB00FF018D5025000B3200E9
+:1062000001463825312800FF3445600000E820258C
+:106210002402FF813C031000AE04014C8FBF001428
+:10622000AE050154A2020152AE0301788FB00010F6
+:1062300003E0000827BD001827BDFFE8308400FFF9
+:10624000AFBF00100E00065B30A500FF34460040D3
+:106250003C0480002405FF92AC860154A0850152C5
+:106260008F8300508FBF00103C02100027BD001824
+:10627000AC83014C03E00008AC82017827BDFFD855
+:10628000AFB20018AFB10014AFB00010AFBF002024
+:10629000AFB3001C3C07800090E20109308600FF8C
+:1062A00030B000FF000618C2320400023071000155
+:1062B00014800007305200FF3C098008353300800D
+:1062C000926800053105000810A0000C30CA0010CB
+:1062D000024020210E000680022028212402000115
+:1062E0008FBF00208FB3001C8FB200188FB1001435
+:1062F0008FB0001003E0000827BD002815400030D3
+:1063000034E50A008CB900248CB800081338004723
+:10631000000040213C0E800835D30080926D00685B
+:10632000240B000231AC00FF118B00803C06800082
+:10633000927F004C90C40109509F00043213007CEE
+:1063400011000067000000003213007C1660005A44
+:106350000240202116200008320C00013C0780007A
+:1063600034EB0A008D6500248CE8010414A8FFDCDE
+:1063700000001021320C00011180000D024020218C
+:106380003C1080008E0E010C8F8D006011CD000836
+:10639000000000000E00073E022028218E0F010C95
+:1063A0003C18800837100080AE0F005002402021BA
+:1063B0000E00066F022028210A00086F2402000147
+:1063C0003C0708008CE7006424E600013C0108005B
+:1063D000AC2600641600000D0000000002202821F9
+:1063E0000E00066F02402021926F0068240D00020B
+:1063F00031EE00FF11CD0022024020210E000823C3
+:10640000000000000A00086F240200010E00004195
+:1064100024040001926C0025020C58250E00004F48
+:10642000A26B00250A0008AF022028218E63001805
+:106430008CE401048CBF002400031602149FFFB5F6
+:106440003045007F9269004C264400013093007F64
+:1064500012650040312300FF1464FFAF3C0E80083A
+:10646000264800013111007F310200FF1225000B88
+:1064700024080001004090210A00087C241100013A
+:10648000240500040E000632240600010E00082335
+:10649000000000000A00086F240200012407FF80AA
+:1064A0000247282400A79026324200FF0040902196
+:1064B0000A00087C241100010E00073E022028215A
+:1064C0003206003010C0FFA33210008202402021AB
+:1064D0000E000680022028210A00086F2402000115
+:1064E0008E6300180240202102202821006610251A
+:1064F0000E000845AE6200189264004C24050003AB
+:10650000240600010E000632308400FF0E00004118
+:1065100024040001926A0025020A48250E00004F5B
+:10652000A26900250A00086F240200018E78001875
+:106530003C198000024020210319782502202821DF
+:106540000E00066FAE6F00189264004C0A0008F748
+:10655000240500043246008038CA0080146AFF6EA9
+:106560003C0E80080A0008D02648000127BDFFC065
+:10657000AFB000183C108000AFBF0038AFB7003498
+:10658000AFB60030AFB5002CAFB40028AFB30024D5
+:10659000AFB200200E0004BBAFB1001C9204010892
+:1065A0009205010B308400FF0E00085630A500FF55
+:1065B000144000E38FBF00383C0980083528008074
+:1065C000A100006B3607098090E60000240200500D
+:1065D0003C17080026F73A8830C300FF3C13080038
+:1065E00026733A98106200033C1080000000B82126
+:1065F00000009821241F001036110A00361409806B
+:106600008E1601048F8D00508E38002436190A80B2
+:106610008E9200203C010800A03F3AD0972C002C1D
+:106620008EF50000932B0018024D702302D87823BA
+:106630003C010800AC2F3AAC3C010800AC2E3AB04B
+:106640003C010800AC2D3AD4A78C005402A0F809F4
+:10665000317200FF304A0002154000E6304500016B
+:1066600010A000C100000000928A0008315000080C
+:1066700016000002241400030000A0213C06800044
+:1066800034C4090034C30A008C6E002490850011C4
+:10669000908200129099001130B800FF305100FF35
+:1066A0000291F821001FB080332F00FF02D858213B
+:1066B000024FA82126AC0010017268213C15800011
+:1066C0003C010800AC2E3AD83C010800A42D3AC881
+:1066D0003C010800A42C3AC43C010800A42B3AC693
+:1066E00036B609808F8700508F8900588ED20020DF
+:1066F0002408000601273023024728233C01080014
+:10670000AC283ACC04C000B30000902104A000B132
+:1067100000C5802B120000B3000000003C010800FF
+:10672000AC263AB08E7100000220F809000000008B
+:10673000304A00021540007400408021304B0001B7
+:10674000556000118E7100043C0D08008DAD3AB407
+:106750003C0EC0003C04800001AE6025AEAC0E00D3
+:106760008C980000330F000811E0FFFD00000000CE
+:10677000949F0E0824120001A79F00408C990E04DC
+:10678000AF9900388E7100040220F8090000000063
+:106790000202802532020002144000A9000000001D
+:1067A0003C08080095083ABC3C11080096313AC8EC
+:1067B0003C09080095293ABE3C0308008C633AB4B2
+:1067C000011168213C1F08008FFF3AD83C070800E0
+:1067D00094E73AD23C11800001A920218E38010CA7
+:1067E000006828212499000200A7702103E3782182
+:1067F000AF9800603C010800AC2F3AD83C0108007B
+:10680000A42E3AC03C010800A42D3ACA0E0001B4DF
+:106810003324FFFF8F8C0048004020213C010800FA
+:10682000A02C3AD18E620008258B0001AF8B004866
+:106830000040F809000000008F85005002803021E0
+:106840000E00051C004020210E00069E0040202165
+:106850008E6A000C0140F809004020213C08080025
+:1068600095083ACA3C09080095293ABE0109382121
+:1068700024E600020E0001C830C4FFFF3C040800FB
+:106880008C843AAC3C0308008C633AB40083282320
+:106890003C010800AC253AAC14A000060000000042
+:1068A0003C0A08008D4A3ACC354600403C010800BD
+:1068B000AC263ACC124000418F8C00448E2B0E1037
+:1068C0008F920044AE4B00208E220E18AE42002460
+:1068D0003C04080094843AC00E0005FA0000000051
+:1068E0008F9900508E7800103C010800AC393AD4E2
+:1068F0000300F809000000003C0F08008DEF3AACDF
+:1069000015E0FF798F870050979400543C13800E58
+:10691000321500100E000629A674002C56A0004463
+:106920008EF60004321F004057E0001D8EF0000874
+:106930008EE3000C0060F809000000008FBF0038F3
+:106940008FB700348FB600308FB5002C8FB400287D
+:106950008FB300248FB200208FB1001C8FB00018BD
+:1069600003E0000827BD0040920901098F88003C20
+:1069700000093E0000E83025AE0600808E2300208E
+:106980008E240024AFA30010AE030E148FA20010BB
+:10699000AE020E10AE040E1C0A000951AE040E1811
+:1069A0000200F809000000008EE3000C0060F80906
+:1069B000000000000A000A078FBF0038240E000103
+:1069C000240D0001A5800020A58E00220A0009EBFD
+:1069D000AD8D00243C010800AC203AB00A000981CA
+:1069E0008E7100003C010800AC253AB00A00098114
+:1069F0008E71000092110109000028210E00066F1F
+:106A0000322400FF8FBF00388FB700348FB60030BC
+:106A10008FB5002C8FB400288FB300248FB20020D4
+:106A20008FB1001C8FB0001803E0000827BD0040A4
+:106A300002C0F809000000000A000A01321F0040ED
+:106A40005240FFB2979400548EB60E148F930044B8
+:106A5000AE7600208EB40E1CAE7400240A0009FA33
+:106A6000979400548F8200140004218003E00008F2
+:106A7000008210213C07800834E2008090430069C6
+:106A800000804021106000093C0401003C07080020
+:106A90008CE73AD48F83003000E320230480000881
+:106AA0009389001C14E300030100202103E0000887
+:106AB000008010213C04010003E000080080102148
+:106AC0001120000B006738233C0D800035AC098095
+:106AD000918B007C316A00021140002024090034AF
+:106AE00000E9702B15C0FFF10100202100E93823D7
+:106AF0002403FFFC00A3C82400E3C02400F9782B82
+:106B000015E0FFEA0308202130C40003000410232D
+:106B100014C00014304900030000302100A978217E
+:106B200001E6702100EE682B11A0FFE03C0401009B
+:106B30002D3800010006C82B01054821031938240F
+:106B400014E0FFDA2524FFFC2402FFFC00A2182435
+:106B50000068202103E00008008010210A000A6F6D
+:106B6000240900303C0C80003586098090CB007CE5
+:106B7000316A00041540FFE9240600040A000A7E79
+:106B8000000030213C0308008C63005C8F820018F9
+:106B900027BDFFE8AFBF001410620005AFB00010C2
+:106BA000000329C024A40280AF840014AF8300181E
+:106BB0003C10800036030A00946500320E000A5033
+:106BC00030A43FFF8E0401003C180080370F000303
+:106BD0000082C8212402FF80032260243329007F21
+:106BE000000CF94003E94025332E00783C0D1000DD
+:106BF000010D502501CF5825AE0C0028360809801C
+:106C0000AE0C080CAE0B082CAE0A083091030069DC
+:106C10003C06800C0126382110600006AF87003446
+:106C20008D09003C8D06006C0126382318E0007F9A
+:106C3000000000003C0C8008358B00803C0A80007E
+:106C4000A1600069355009808E0200383C06800042
+:106C500034C50A0090AD003C31A800201100001995
+:106C6000AF820030240E00013C19800037300A004A
+:106C7000A38E001CAF8000248E0400248F85002486
+:106C800024180008AF800020AF8000283C010800D5
+:106C9000A4383ABE3C010800A4203AD20E000A549F
+:106CA00000003021920F003C8FBF00148FB0001005
+:106CB000000F7142AF82002C27BD001803E00008CE
+:106CC00031C2000190B90032240F0001333800FFB7
+:106CD00000182182108F003F241F0002109F0062C5
+:106CE00034C20AC03C03800034640A008C9900243A
+:106CF0001720001D3466090090830030241F000512
+:106D00003062003F105F004C240500018F86002098
+:106D1000A385001CAF860028AF8600243C198000A4
+:106D200037300A008E0400248F85002424180008C0
+:106D30003C010800A4383ABE3C010800A4203AD225
+:106D40000E000A5400000000920F003C8FBF001498
+:106D50008FB00010000F7142AF82002C27BD0018C9
+:106D600003E0000831C200018C8800088C8D0024EB
+:106D70008CCB00643C19800037300A00AF8B0024B4
+:106D8000A380001C8E0400248F8600208F850024A1
+:106D9000010D602324180008AF8C00283C01080076
+:106DA000A4383ABE3C010800A4203AD20E000A548E
+:106DB00000000000920F003C8FBF00148FB0001045
+:106DC000000F7142AF82002C27BD001803E00008BD
+:106DD00031C2000190A7003030E3003F506400282A
+:106DE00034C50AC08CAA00241540002234C809000A
+:106DF0008CAB00483C0C7FFF3585FFFF01651024FC
+:106E00003C188000AF820020370509008F8E0020DB
+:106E10008CAF006001CF682B15A0000201C02021BB
+:106E20008CA400600A000AF0AF8400208D02006C80
+:106E30000A000ACB3C0680008C8900488F8600201F
+:106E40003C0A7FFF3550FFFF013038243C048008A6
+:106E500024050001AF870028AC80006CA385001CCE
+:106E60000A000AFEAF8600248C4400140A000AF0CF
+:106E7000AF8400208D0200680A000B383C188000A7
+:106E800034C409808C8600708CB0001400D0482B6C
+:106E900011200004000000008C8200700A000B38F2
+:106EA0003C1880008CA200140A000B383C188000AB
+:106EB0008F85002427BDFFE0AFBF0018AFB10014DD
+:106EC00014A00008AFB000103C04800034870A0012
+:106ED00090E600302402000530C3003F106200B786
+:106EE000348409008F91002000A080213C048000A0
+:106EF000348E0A008DCD00043C0608008CC63AB0E2
+:106F000031A73FFF00E6602B5580000100E03021F3
+:106F1000938F001C11E0007600D0102B349909806B
+:106F20009338007C3304000210800077240300347F
+:106F300000C3F82B17E000D600C3302300D0102B7D
+:106F40003C010800A4233ABC1440006D0200182143
+:106F50003C0408008C843AAC0064282B54A0000147
+:106F6000006020213C05800034A90A009128003CE3
+:106F70003C010800AC243AB4310300201460000244
+:106F8000000048218CA90E188F88002C0128502B56
+:106F90001140005F000000003C0508008CA53AB4D9
+:106FA00000A96021010C582B1160005C00B0682B17
+:106FB0000109382300E028213C010800AC273AB43D
+:106FC000120000032402FFFC10B0008C322A0003E0
+:106FD00000A2F8243C010800A4203AD23C01080099
+:106FE000AC3F3AB403E028218F8400241204000649
+:106FF0003C0380088C6A006C02002021AF910020C5
+:1070000025500001AC70006C8F8B00280085882310
+:10701000AF91002401652023AF84002812200002D4
+:1070200024070018240700103C0E800835C6008095
+:1070300090CD0068240C00013C010800A0273AD044
+:1070400031A700FF10EC004700000000148000187A
+:10705000000028213C0B80009165010935710980F1
+:107060008E23001830A500FF0003560224A3000160
+:107070003146007F3070007F1206007E240CFF80B6
+:107080003C0F800835E90080A123004C3C08080033
+:107090008D083ACC240E00023C010800A02E3B11C2
+:1070A000350D00083C010800AC2D3ACC2405001039
+:1070B0003C1F800037E40A009099003C33380020E0
+:1070C0001300000500A02021240200013C0108005B
+:1070D000AC223AB434A400018FBF00188FB1001461
+:1070E0008FB000100080102103E0000827BD0020B1
+:1070F0003C010800A4203ABC1040FF950200182172
+:107100000A000B8B00C018210A000B8324030030F7
+:107110003C0508008CA53AB400B0682B11A0FFA86C
+:10712000000000003C04080094843ABC00857821EB
+:1071300001E7702B11C000072CA200043C1F600067
+:107140008FF954043338003F1700FFE32404004252
+:107150002CA200041040FF9A240400420A000BEE07
+:107160008FBF00181528FFB9000000008CC200185E
+:107170003C188000241900020058F825ACDF0018E4
+:1071800037040A00A0D900689089003C240F00044D
+:1071900000A01021312800203C010800A02F3B1145
+:1071A0001100000224050010240200013C01080027
+:1071B000AC223AAC0A000BE43C1F80008F88002808
+:1071C0008C8900600109282B14A00002010088218D
+:1071D0008C9100603C0B80008D640E18240A000125
+:1071E0000220282102203021A38A001C0E000A540C
+:1071F000022080210A000B72AF82002C000A1823A3
+:1072000012200007306400033C0D800035A7098080
+:1072100090EC007C318B000415600019248E000472
+:107220003C010800A4243AD23C18080097183AD22E
+:107230000305202100C4782B11E0FF6C8F8400240B
+:107240002CA6000514C0FFA42404004230B900039A
+:107250001720000200B9182324A3FFFC3C010800FA
+:10726000AC233AB43C010800A4203AD20A000BB186
+:107270000060282100AC38240A000BD700EC182647
+:107280003C010800A42E3AD20A000C410000000084
+:107290003C010800AC203AB40A000BED2404004283
+:1072A0008F8300283C0B8000356A0A0014600006BA
+:1072B00000001021914600302405000530C400FF75
+:1072C000108500030000000003E00008000000003B
+:1072D00091490048312800FF000839C214E0FFFA44
+:1072E0003C0480083C06080094C63ABC3C030800F5
+:1072F0008C633AD43C0508008CA53AB43C180800CD
+:1073000097183AD20066C8218C8E00040325782194
+:1073100001F8682101AE60231980001D0000000003
+:107320009158004C8F8D0034956E0E10330F00FF76
+:107330008DA9000401CF30238DAA000030CFFFFFBC
+:10734000000F6100012C2821000038210147202175
+:1073500000AC182B0083C821ADA50004ADB9000016
+:1073600091B8000A01F87021A1AE000A956C0E12C6
+:107370008F8A0034A54C0008954900382528000163
+:10738000A54800389147000D34EB0008A14B000DD3
+:1073900003E000080000000027BDFFD8AFB00018D0
+:1073A000938F001C8FB000143C087FFF8F87002450
+:1073B0003C0C80003518FFFFAFBF0020AFB1001CB0
+:1073C00035990A0002181824932A003C000F5FC068
+:1073D0003C02BFFF2CF000013449FFFF006BF82591
+:1073E0003C0808008D083AD48F9900303C180800FA
+:1073F00097183ACA03E9582400107F803C07EFFF32
+:107400003C05F0FF016F18253C1180003149002038
+:1074100034E2FFFF34ADFFFF362E098027A50010B0
+:107420002406000201194023270A000200621824E2
+:107430000080802115200002000058218D8B0E1C39
+:10744000A7AA00120500003A2407000030EF00FF51
+:10745000000F3F00006740253C028008AFA80014E1
+:10746000344B0080916A00683C0F080091EF3AD1DC
+:107470003C09DFFF353FFFFF000A602B3C0208009C
+:1074800094423AC4A3AF0011011FC024000CCF40A6
+:10749000031918258FA70010AFA300143C1F080084
+:1074A00093FF3AD3A7A200168FA8001400ED48243A
+:1074B0003C0B01003C0A0FFF012BC82533F80003E9
+:1074C000354CFFFF010D78243C027000032C38245A
+:1074D00000181E0000E2482501E35825AFAB001458
+:1074E000AFA9001091DF007CA3BF00150E00006360
+:1074F00000000000362D0A0091A6003C30C4002098
+:1075000010800006260200083C11080096313AC09F
+:10751000262EFFFF3C010800A42E3AC08FBF00209A
+:107520008FB1001C8FB0001803E0000827BD0028B1
+:107530008F8A002C016A602B5580FFC4240700014C
+:107540000A000CCB30EF00FF9383001C3C0280004C
+:1075500027BDFFD834480A0000805021AFBF00206B
+:1075600034460AC0010028211060000E344409800E
+:1075700091070030240B00058F89002030EC003F7C
+:10758000118B000B00003821AFA900103C0B8008C4
+:107590008D69006CAFAA00180E00012BAFA9001472
+:1075A000A380001C8FBF002003E0000827BD002837
+:1075B0008D1F00483C1808008F183AB48F99002896
+:1075C0003C027FFF8D0800443443FFFFAFA9001049
+:1075D0003C0B80088D69006C03E37024031978214B
+:1075E00001CF682301A83821AFAA00180E00012B93
+:1075F000AFA900140A000D20A380001C3C058000E8
+:1076000034A60A0090C7003C3C06080094C63AD253
+:107610003C0208008C423ACC30E3002000062400F3
+:107620001060001E004438253C08800835050080A5
+:1076300090A30068000030212408000100002021F0
+:10764000240300013C0580008CAC01780580FFFE1E
+:1076500000000000ACA80148A4A40144A4A3014672
+:107660003C0308008C633AD43C188008370F008034
+:10767000ACA3014C3C19080093393AD13C0D1000E1
+:10768000A0B90152ACA70154A4A6015891EE004C38
+:10769000A0AE016D03E00008ACAD01788CA80E1C13
+:1076A0003C0B08008D6B3AB494AA0E1694A90E14E4
+:1076B000016630213143FFFF0A000D483124FFFFEE
+:1076C0003C04800034830A009065003C30A2002016
+:1076D0001040001C000000000000302100002021AC
+:1076E000000018213C0580008CA901780520FFFED0
+:1076F00000000000ACA601483C0E08008DCE3AD434
+:10770000240DFF91240C00403C0B8008A4A30144ED
+:10771000356A0080A4A40146ACAE014CA0AD015274
+:10772000ACAC0154A4A0015890A301099144004CB1
+:1077300090A601093C041000A0A6016D03E000081A
+:10774000ACA401788C860E1894880E1294870E10C3
+:107750003104FFFF0A000D7030E3FFFF3C0480009E
+:1077600034830A009065003C30A2002010400026BF
+:1077700027BDFFF82409000100003821240800017A
+:107780003C0680008CC401780480FFFE00000000ED
+:1077900090CA01093C04080090843B113C1880FF0A
+:1077A000A3AA00038FA300003085007F370FFFFFDF
+:1077B00000661025AFA2000090D9010AA3A0000224
+:1077C00000056E00A3B900018FAE0000240A30004E
+:1077D00027BD000801CF6024018D5825ACCB014C9A
+:1077E000ACCA0154A4C00158ACC90148A4C70144A3
+:1077F0002409FF80A4C801463C081000A0C901521A
+:1078000003E00008ACC801788C890E1894870E122A
+:1078100094860E1030E8FFFF0A000D9730C7FFFF77
+:1078200027BDFFE8AFB000103C108000AFBF0014D0
+:1078300036180A00970F00320E000A5031E43FFF5D
+:107840008E0E0100240DFF803C04200001C258214F
+:10785000016D6024000C4940316A007F012A4025F7
+:10786000010438253C048008AE07083034860080C7
+:1078700090C500682403000230A200FF10430004FA
+:107880008F9F00208F990024AC9F0068AC99006402
+:107890008FBF00148FB0001003E0000827BD001850
+:1078A0003C0A0800254A359C3C0908002529363841
+:1078B0003C08080025082A603C07080024E736FC3D
+:1078C0003C06080024C634243C05080024A5317C6D
+:1078D0003C04080024842D8C3C030800246334D825
+:1078E0003C020800244232743C010800AC2A3A9061
+:1078F0003C010800AC293A8C3C010800AC283A88CD
+:107900003C010800AC273A943C010800AC263AA49C
+:107910003C010800AC253A9C3C010800AC243A9894
+:107920003C010800AC233AA83C010800AC223AA074
+:0879300003E000080000000064
+:087938008000094080000900F5
+:10794000800801008008008080080000800E000090
+:10795000800800808008000080000A8080000A0003
+:0879600080000980800009008D
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-rv2p-09-5.0.0.j10.fw.ihex b/firmware/bnx2/bnx2-rv2p-09-5.0.0.j10.fw.ihex
new file mode 100644
index 000000000000..fe59d16b594e
--- /dev/null
+++ b/firmware/bnx2/bnx2-rv2p-09-5.0.0.j10.fw.ihex
@@ -0,0 +1,462 @@
+:100000000000000000000E08000000580000000979
+:1000100000000000000000000000000000000000E0
+:1000200000000000000000000000000000000000D0
+:1000300000000DD800000E60000000050000000068
+:1000400000000000000000000000000000000000B0
+:080050000000000000000000A8
+:0800580000000010B180000659
+:100060000000001F05030300000000080500FFFF5B
+:10007000000000180002000000000008050000FF5A
+:10008000000000180002000000000008AC000001A1
+:1000900000000000050000000000000C2F8000019F
+:1000A000000000002B000000000000002B8000007A
+:1000B0000000001091E0000200000008AC00000108
+:1000C00000000010203F006B00000010213F0003E3
+:1000D0000000001020BF003A000000188000FFFD63
+:1000E00000000010B1B8B0150000000B2FDF0002B7
+:1000F0000000000003D80000000000002C380000C1
+:10010000000000082C800000000000082D00000006
+:100110000000001091D400000000000806005555B2
+:10012000000000188000007C000000082D80011CE9
+:1001300000000008020000010000001091DE000035
+:100140000000000F42E0001C0000001091840A161D
+:1001500000000018800000830000000C29800002CD
+:100160000000000C1F800002000000002ADF0000D9
+:10017000000000082A00000F000000000500000039
+:10018000000000188000FFE60000000802000001E7
+:100190000000000F42E0001C0000001091840A18CB
+:1001A000000000082C800006000000082D0000065A
+:1001B0000000001091D40000000000082D8001060E
+:1001C0000000001880000072000000188000FFF19D
+:1001D00000000008B1000001000000082C80010CA4
+:1001E000000000082D000008000000082D8000011C
+:1001F000000000188000006C0000000B2FDF0002E0
+:100200000000000C1F800002000000002C0700000E
+:100210000000001091DE00000000000805005555A8
+:10022000000000188000FFD20000000B2FDF00024A
+:100230000000000C1F800000000000002C070000E0
+:100240000000001091DE0000000000080500555578
+:10025000000000188000FFCC0000000C1F8000028E
+:100260000000000805005555000000188000FFC977
+:100270000000000C298000020000000C1F8000021A
+:10028000000000002ADF0000000000082A0000052E
+:100290000000000805005555000000188000FFC34D
+:1002A000000000080224004A0000001800040000BA
+:1002B000000000188000001C000000188000001ED4
+:1002C000000000188000006500000018800000BCDD
+:1002D00000000018800000BB000000188000000033
+:1002E00000000018800000000000001880000000DE
+:1002F00000000018800000000000001880000000CE
+:1003000000000018800000000000001880000000BD
+:1003100000000018800000000000001880000107A5
+:10032000000000188000000000000018800000009D
+:100330000000001880000015000000188000001B5D
+:10034000000000188000000000000018800000D2AB
+:10035000000000188000002F000000188000010736
+:10036000000000188000013200000018800000FD2D
+:100370000000001880000156000000188000004EA8
+:100380000000001880000000000000188000008FAE
+:100390000000000C1F8000010000000005000000AC
+:1003A000000000188000FFA20000001091D400009F
+:1003B0000000000C298000010000000C1F800001DB
+:1003C000000000082A0000020000000005000000F4
+:1003D000000000188000FF9C0000001091D4000075
+:1003E0000000000C298000010000000C1F800001AB
+:1003F0000000000029420000000000082A0000025E
+:100400000000000005000000000000188000FF95BB
+:10041000000000188000FF9400000010B1BCB00A7A
+:100420000000000B2FDF00020000000003D80000D6
+:10043000000000002C3C00000000001091D40000DF
+:100440000000000806005555000000188000001745
+:1004500000000018800000CB000000102C6201BAE0
+:100460000000001880000006000000082C80010D2C
+:10047000000000082D0000090000001091D40000C9
+:10048000000000082D8001070000001880000024F3
+:100490000000000C298000000000000C1F800000FC
+:1004A0000000001091DE0000000000002ADF0000C4
+:1004B000000000082A00000600000008050055554D
+:1004C000000000188000FF7E0000001091D40000A2
+:1004D0000000000C298000010000000C1F800001BA
+:1004E000000000082A00000B0000000005000000CA
+:1004F000000000188000FF780000001800020000D3
+:10050000000000000682000000000010B18A000810
+:1005100000000010B18C14070000000B050AFFFF5B
+:1005200000000010B18A000300000000860A1800D5
+:1005300000000010918C0000000000082A0000015B
+:100540000000001091D4000000000018000D000011
+:1005500000000000050200000000001091DE000015
+:1005600000000018000A00000000000006820000E1
+:100570000000001091DE000000000010BEE1000548
+:10058000000000188000FF5F0000000105611400FA
+:1005900000000010918A000200000008B0E1000194
+:1005A00000000018000D000000000000068200009E
+:1005B0000000001091DE000000000010BEE2000507
+:1005C000000000188000FF570000000105621400C1
+:1005D00000000010918A000200000008B1620001D2
+:1005E00000000018000D000000000010B1A0B013C2
+:1005F0000000000B2FDF0002000000002C20000094
+:10060000000000082C800000000000082D00000001
+:100610000000001091D400000000000806005555AD
+:10062000000000188000FFDC000000082D80011C85
+:1006300000000010001F0000000000188000FFE60E
+:100640000000000F476000080000000F060E0001C8
+:10065000000000000F580000000000000A640000C5
+:10066000000000000AE50000000000090B66FFFF23
+:10067000000000000D610000000000188000001361
+:100680000000000F476000080000000B2FDF000291
+:10069000000000082C800000000000082D00000071
+:1006A0000000001091D40000000000082D80011C03
+:1006B0000000000F060E000100000010001F0000E7
+:1006C000000000000F580000000000188000FFD458
+:1006D000000000000A640000000000000AE50000BD
+:1006E000000000090B66FFFF000000000D61000024
+:1006F00000000000026200000000000B2FDF00027B
+:10070000000000003104000000000000309A0000EA
+:10071000000000090560000F00000010B18A000B06
+:100720000000000005634C0000000008050A0012EC
+:1007300000000010B9621403000000000300000074
+:100740000000001880000006000000188000FF2450
+:1007500000000010B60614040000000803060001A3
+:10076000000000082A000001000000188000FF2996
+:10077000000000000C961800000000090C99FFFF13
+:1007800000000004CC99340000000010B196320241
+:10079000000000080F8000000000000C298000010C
+:1007A0000000000C295200010000000C295200003A
+:1007B000000000080200000E000000080280001A7D
+:1007C00000000010B1C40A0200000008020000038B
+:1007D00000000008220000010000000C1F80000142
+:1007E000000000002ADF0000000000002A000800CE
+:1007F0000000000805005555000000188000FF1794
+:100800000000000B2FDF00020000001091D4000058
+:10081000000000082A000001000000002C20000059
+:100820000000001091D40000000000082C8000009F
+:10083000000000082D000000000000082D80011CB1
+:10084000000000188000FFA2000000082C800006B5
+:10085000000000082D0000060000000030800000AD
+:100860000000000031000000000000082D8000069C
+:100870000000000C298000010000000C1F80000116
+:100880000000001091DE0000000000002ADF0000E0
+:10089000000000082A000010000000000500000011
+:1008A000000000188000FF020000001091A0B009B5
+:1008B000000000082C80010D000000082D00000938
+:1008C0000000001091D40000000000082D800107F6
+:1008D000000000188000FF9B00000018800000103E
+:1008E00000000008AC000001000000188000000BB0
+:1008F000000000000380B0000000000B2FDF0002AA
+:10090000000000002C0040000000001091D4000006
+:100910000000000806005555000000188000FF7D0B
+:100920000000001880000031000000188000000660
+:100930000000000B2FDF0002000000002C000E0062
+:10094000000000082A0000070000000805005555B7
+:10095000000000188000FEEC00000000068200008D
+:100960000000000C298000010000000C1F80000125
+:10097000000000100CE70007000000090562FFFFFF
+:1009800000000010BA6C1405000000002ADF00000F
+:100990000000000021000000000000082A000005FF
+:1009A0000000001091D40000000000082C80010C11
+:1009B000000000082D0000080000000C3162001843
+:1009C000000000082D800001000000188000FF7169
+:1009D00000000018000D000000000010B1A0B00ED3
+:1009E0000000000B2FDF00020000000003D8000011
+:1009F000000000002C2000000000001091D4000036
+:100A00000000001880000015000000102C62000299
+:100A1000000000188000000C0000000B2FDF000217
+:100A2000000000002C0700000000000C1F800001E7
+:100A30000000001091DE0000000000080500FFFF2C
+:100A4000000000188000FECE000000082C80010D80
+:100A5000000000082D0000090000001091D40000E3
+:100A6000000000082D800107000000188000FF68CA
+:100A70000000000C298000010000000C1F80000114
+:100A80000000001091DE0000000000002ADF0000DE
+:100A9000000000082A00000A000000000500000015
+:100AA000000000188000FEC2000000000682000066
+:100AB000000000082C80010C000000082D00000838
+:100AC000000000082D80013400000000000000003C
+:100AD00000000010205F0000000000082C80014092
+:100AE000000000082D00003C000000082D800124BB
+:100AF00000000000000000000000001091DE000077
+:100B0000000000082C800080000000082D0000007C
+:100B1000000000082D80010500000010BEE2000565
+:100B2000000000188000FEAB000000010562140008
+:100B300000000010918A000200000008B16200016C
+:100B40000000001091DE000000000018000D000001
+:100B50000000001091D40000000000080600AAAABE
+:100B6000000000188000FF340000000C2980000104
+:100B70000000000C1F800001000000082A0000098E
+:100B8000000000080500AAAA000000188000FEA5C9
+:100B90000000001091D40000000000080600555528
+:100BA000000000188000FF2C0000001091A03C0203
+:100BB00000000010B1E662070000000B2FDF00020A
+:100BC000000000002C310000000000092CB1007F63
+:100BD000000000082CD90000000000082D000000D3
+:100BE000000000082D80010D00000010B1A80006D3
+:100BF00000000010205F0000000000002C2000001A
+:100C0000000000002CA70000000000082D000010CC
+:100C1000000000082D800108000000188000FF2758
+:100C200000000010B1A6001000000010001F00001E
+:100C30000000000F0F300007000000000A600000F5
+:100C4000000000000AE100000000000F4B620008F5
+:100C5000000000090B1600FF000000000D620000FC
+:100C6000000000090D1A00FF00000010073000030B
+:100C70000000000C0D1A00080000000C0B16000804
+:100C80000000000F4CE30018000000000C992C003D
+:100C900000000004CC993400000000080F80000020
+:100CA0000000000C2980000100000000333100002A
+:100CB0000000000822000016000000002ADF0000EB
+:100CC000000000082A00000C00000010009F000037
+:100CD000000000000F2000000000000C1F80000139
+:100CE0000000000805005555000000188000FE793E
+:100CF0000000001091D40000000000080600AAAA1D
+:100D0000000000188000FF000000000F47220008CC
+:100D100000000009070E000F00000008070E000881
+:100D200000000008028000010000000702851C008E
+:100D300000000008828500010000000002854C00D0
+:100D40000000000742851C0000000003C3AA5200F7
+:100D50000000000003B10E00000000074B071C005C
+:100D60000000000F0F3000070000000F0A9600037C
+:100D7000000000000A955C00000000004A005A00D4
+:100D8000000000000C960A00000000090C99FFFF0B
+:100D9000000000080D00FFFF00000010B1963202B5
+:100DA000000000080F80000500000010B1A8000836
+:100DB00000000010205F00000000000B2FDF000289
+:100DC000000000002C200000000000002CA7000004
+:100DD000000000082D000010000000082D80010810
+:100DE000000000188000FEEE0000000C29800001C9
+:100DF00000000010001F00000000000C1F80000118
+:100E0000000000002ADF0000000000082A00000D9A
+:100E1000000000080500AAAA000000188000FE5388
+:100E20000000001091D40000000000080600555595
+:100E3000000000188000FEDA0000000C298000018C
+:100E40000000000C1F800001000000082A000007BD
+:100E50000000000805005555000000188000FE4BFA
+:100E600000000010B18000040000001F0503030013
+:100E700000000008050000FF00000018000200004C
+:100E8000000000002A00000000000010B1D40000A3
+:100E90000000001091DE0000000000102053000050
+:100EA00000000010001F0000000000002F80AA00BA
+:100EB0000000000C29800001000000080254000E10
+:100EC000000000002C400000000000092952003FF3
+:100ED000000000180004000000000018800000104E
+:100EE0000000001880000011000000188000003988
+:100EF00000000018800000FD00000018800000FCC9
+:100F000000000018800000FB00000018800000FBBB
+:100F1000000000188000000000000018800001138D
+:100F200000000018800000F7000000188000000B8F
+:100F30000000001880000117000000188000016503
+:100F4000000000188000006300000018800000CE40
+:100F500000000018800000DE000000002A000000F1
+:100F6000000000188000FFE5000000002A000000DB
+:100F70000000000C29800000000000188000FFE243
+:100F8000000000002A000000000000188000FFE0C0
+:100F90000000001800020000000000000502000030
+:100FA000000000109196342100000010205F000026
+:100FB000000000002C1E0000000000082C8000062D
+:100FC000000000082D000006000000082D8001022E
+:100FD00000000000000000000000001091DE000092
+:100FE000000000000D61000000000018000A000071
+:100FF0000000000005020000000000109196341669
+:1010000000000010205F00000000000009D8000070
+:10101000000000002C1E0000000000082C80010EC3
+:10102000000000082D00000A000000082D800102C9
+:1010300000000000000000000000001091DE000031
+:10104000000000000D620000000000002C130000F2
+:1010500000000018000A0000000000000502000067
+:10106000000000109196340900000010205F00007D
+:10107000000000002C1E0000000000082C8000066C
+:10108000000000082D00006A000000082D80010209
+:1010900000000000000000000000001091DE0000D1
+:1010A000000000000D7A000000000018000A000097
+:1010B000000000002A000000000000000D61000098
+:1010C000000000000362000000000010234200C185
+:1010D0000000000002638C000000000026460000B3
+:1010E000000000080204001200000010B9060827E2
+:1010F000000000000F580000000000000A6400001B
+:10110000000000000AE50000000000090B66FFFF78
+:10111000000000000C000000000000000B80000038
+:10112000000000080CC60012000000188000FFCE6E
+:10113000000000080F800003000000000000000015
+:1011400000000010009F000000000008271100129E
+:10115000000000006690000000000008A31B0012C1
+:1011600000000010B198000300000010001F0000F4
+:10117000000000080F8000040000000822000003A7
+:10118000000000082C80000C000000082D00000C5E
+:1011900000000010009F00000000000025960000E5
+:1011A0000000000C2980000000000000066600001E
+:1011B0000000000086611800000000090260000FB6
+:1011C0000000000F0204000200000010B60C080529
+:1011D0000000000C1FBF0000000000102866000384
+:1011E00000000008078F00010000000C33660010AB
+:1011F00000000000321400000000000032950000E2
+:101200000000000573662C000000000031E32E0092
+:10121000000000082D800010000000188000FF8EE4
+:1012200000000000230000000000000925E6FFFF89
+:10123000000000082200000B0000000C69520000B2
+:101240000000000C298000000000001028660075D6
+:10125000000000188000FF87000000002A00000046
+:10126000000000082C800040000000082D00002035
+:10127000000000082D80011C00000000000000009C
+:101280000000001091DE00000000000F42EA001094
+:1012900000000010004F000400000010B74692004C
+:1012A000000000080249001200000010B5840A0086
+:1012B000000000000D61000000000010BA66345705
+:1012C000000000088305001200000010004F00021B
+:1012D00000000000034900000000000183068C00AC
+:1012E0000000000083C60C0000000010B187001150
+:1012F000000000000B6E000000000010BEE90005B9
+:10130000000000188000FF6E000000010569140055
+:1013100000000010918A000200000008B4E90001FA
+:1013200000000010B1E92C4A0000000086692C0082
+:1013300000000000020000000000000902EAFFFFB8
+:1013400000000010000C00020000000002040A006F
+:101350000000000F460C00010000000F0285000194
+:1013600000000010918C01FC00000010B7040E4139
+:10137000000000000F400000000000000D610000B0
+:10138000000000000A640000000000000AE5000000
+:10139000000000090B66FFFF000000000C000000C9
+:1013A000000000000B800000000000080C86001206
+:1013B000000000080F8000030000000C295200000C
+:1013C00000000010009F000000000008271100121C
+:1013D00000000000669000000000000026460000AB
+:1013E000000000002306000000000010B198000576
+:1013F00000000010001F0000000000080F80000423
+:10140000000000000000000000000010001F0000AD
+:1014100000000000321400000000000032950000BF
+:101420000000000031E32E000000000573662C0070
+:10143000000000002596000000000010B187001693
+:101440000000000C298000000000000F0F6B000757
+:10145000000000000D690000000000000A6C0000A0
+:10146000000000000AED0000000000000B6E00000C
+:10147000000000000B800000000000000C8700004E
+:10148000000000080F80000300000010205300003F
+:101490000000000C6952000100000010001F000055
+:1014A0000000000022C58C0000000000231B00008B
+:1014B000000000002711000000000000269000003E
+:1014C00000000010B8170E030000000C2980000077
+:1014D000000000188000FFF600000010B198000224
+:1014E000000000080F800004000000082200001A1D
+:1014F000000000082C80000C000000082D00000CEB
+:10150000000000082D80001000000010001F0000E7
+:10151000000000000D6E000000000003E7CF340063
+:101520000000000C298000000000001091DE000087
+:1015300000000010B1870007000000003614000012
+:101540000000000036950000000000003716000083
+:10155000000000082C800050000000082D00003022
+:10156000000000082D80000C000000188000FF24FF
+:1015700000000000264600000000000023000000DC
+:101580000000000925E6FFFF000000000B6E0000D0
+:1015900000000003E7CF2C00000000082200001B21
+:1015A0000000000C695200000000000C29800000BF
+:1015B000000000188000FF1B000000002A0000004F
+:1015C000000000100866000500000000066600002C
+:1015D000000000008661180000000009026000F0B1
+:1015E00000000010B60C0802000000188000FF1474
+:1015F000000000000682000000000010B18F000013
+:1016000000000008878F00010000000C73660010C6
+:10161000000000082C800018000000082D000018B1
+:10162000000000082D8000020000000C5FBF0000D9
+:101630000000001091DE000000000018000D000006
+:10164000000000002A00000000000010286601F5DC
+:10165000000000082C800003000000082D0000039B
+:10166000000000093060FFF0000000082D8000013C
+:101670000000000C298000000000001091DE000036
+:10168000000000082C80001A000000082D00001A3D
+:101690000000000573660000000000082D800002B5
+:1016A00000000000318000000000001091DE00000A
+:1016B000000000082C80000C000000082D00000C29
+:1016C000000000082D800004000000188000FEF8D3
+:1016D0000000001800020000000000188000FEF664
+:1016E000000000002A00000000000010001F0000A1
+:1016F000000000000F008000000000080F800007BD
+:10170000000000188000001A00000000280A0000F5
+:10171000000000000502000000000008220000098F
+:1017200000000000290000000000000F65680010A4
+:1017300000000003F66C940000000010B972A004D1
+:101740000000000C73E700190000000C21420004A7
+:10175000000000003CF800000000000C29800000A0
+:1017600000000010205300000000000822000008C4
+:101770000000000C6142000400000018000A000094
+:1017800000000000050200000000000C61420000A3
+:1017900000000010014200030000000C33E7001DB0
+:1017A0000000000C6142000200000018000A000066
+:1017B000000000002A00000000000010001F0000D0
+:1017C0000000000F0F470007000000080F8000080E
+:1017D0000000000C2980000000000010009F0000A5
+:1017E000000000188000FED500000000335100000A
+:1017F000000000002A00000000000010B1C6002315
+:101800000000000F0F500007000000000A600000F9
+:10181000000000000AE100000000000F4B62000819
+:10182000000000090B1600FF0000000F4C620010C2
+:10183000000000000D620000000000090D1A00FF0A
+:1018400000000010075000030000000C0D1A0008F3
+:101850000000000C0B160008000000000CC6000081
+:10186000000000000B80000000000000069800004F
+:10187000000000080F8000030000001006C20004F2
+:101880000000000C290000020000001026420002A7
+:101890000000000C29520003000000082200000193
+:1018A00000000010009F000000000000231B00004B
+:1018B0000000000027111A000000000066900000E0
+:1018C0000000000C2952000000000010B1973209FE
+:1018D0000000000C298000000000000006980000B5
+:1018E00000000010205300000000000C29520003EB
+:1018F0000000000022C58C0000000010001F000046
+:10190000000000080F800003000000188000FFF3B3
+:1019100000000010B1C8001300000010B1C60003A1
+:101920000000000C2980000000000010205300007F
+:101930000000000C295200000000000C2952000396
+:101940000000001006C200020000000C2952000234
+:101950000000000022C58C00000000002765000088
+:101960000000000026E4000000000008220000162D
+:1019700000000010B1C60003000000002348000072
+:1019800000000010B18000050000000023480000A6
+:101990000000000C298000000000000F0F5000071D
+:1019A000000000188000001200000008220000164D
+:1019B0000000000C2980000000000000301400002E
+:1019C00000000000309500000000001007500003E8
+:1019D000000000090B1600FF000000090D1A00FFAF
+:1019E0000000000F311600080000000031623400D2
+:1019F00000000003F162300000000010205F0000D2
+:101A0000000000002C510000000000092CD1007FD4
+:101A1000000000082CD90000000000082D00000084
+:101A2000000000082D80000C0000000000000000F5
+:101A30000000001091DE00000000001005C200044C
+:101A4000000000080F8000070000000033000000C5
+:101A500000000010009F0000000000188000FE86BB
+:101A6000000000002A0000000000000F0F500007D7
+:101A700000000010B1C6002D0000000F4742000812
+:101A800000000009070E000F00000008070E000804
+:101A900000000010001F0000000000080900000105
+:101AA0000000000709121C0000000003CBCA9200CE
+:101AB000000000000B97A2000000000742171C0066
+:101AC000000000000B0400000000000F0A84000367
+:101AD000000000000A959C00000000004A009A00E7
+:101AE0000000000882120001000000010C1708002D
+:101AF000000000000C978C0000000000021800009D
+:101B0000000000080D00FFFF000000080F80000625
+:101B10000000000C290000000000001006C20004B4
+:101B20000000000C295200020000001026420002B2
+:101B30000000000C295200030000000822000001F0
+:101B400000000010009F000000000010B197320C50
+:101B500000000000231B0000000000002711080007
+:101B600000000000669000000000000C29800000CA
+:101B700000000000021800000000001020530000C8
+:101B80000000000C295200030000000022C53600AE
+:101B900000000010001F0000000000080F80000679
+:101BA000000000188000FFF400000000231B00006C
+:101BB00000000000271108000000000066900000EF
+:101BC00000000010B1C8000B0000000C29800000CC
+:101BD00000000010205300000000000C29520000FB
+:101BE0000000000C295200030000001006C2000291
+:101BF0000000000C295200020000000022C58C00E9
+:101C000000000000276500000000000026E400003E
+:101C10000000000023480000000000082200001718
+:101C20000000000C2980000000000010001F0000D0
+:081C3000000000188000FE4BCB
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex
deleted file mode 100644
index 69f5e952cbf4..000000000000
--- a/firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex
+++ /dev/null
@@ -1,462 +0,0 @@
-:100000000000000000000E00000000580000000981
-:1000100000000000000000000000000000000000E0
-:1000200000000000000000000000000000000000D0
-:1000300000000DD800000E58000000050000000070
-:1000400000000000000000000000000000000000B0
-:080050000000000000000000A8
-:0800580000000010B180000659
-:100060000000001F05030300000000080500FFFF5B
-:10007000000000180002000000000008050000FF5A
-:10008000000000180002000000000008AC000001A1
-:1000900000000000050000000000000C2F8000019F
-:1000A000000000002B000000000000002B8000007A
-:1000B0000000001091E0000200000008AC00000108
-:1000C00000000010203F006B00000010213F0003E3
-:1000D0000000001020BF003A000000188000FFFD63
-:1000E00000000010B1B8B0150000000B2FDF0002B7
-:1000F0000000000003D80000000000002C380000C1
-:10010000000000082C800000000000082D00000006
-:100110000000001091D400000000000806005555B2
-:10012000000000188000007C000000082D80011CE9
-:1001300000000008020000010000001091DE000035
-:100140000000000F42E0001C0000001091840A161D
-:1001500000000018800000830000000C29800002CD
-:100160000000000C1F800002000000002ADF0000D9
-:10017000000000082A00000F000000000500000039
-:10018000000000188000FFE60000000802000001E7
-:100190000000000F42E0001C0000001091840A18CB
-:1001A000000000082C800006000000082D0000065A
-:1001B0000000001091D40000000000082D8001060E
-:1001C0000000001880000072000000188000FFF19D
-:1001D00000000008B1000001000000082C80010CA4
-:1001E000000000082D000008000000082D8000011C
-:1001F000000000188000006C0000000B2FDF0002E0
-:100200000000000C1F800002000000002C0700000E
-:100210000000001091DE00000000000805005555A8
-:10022000000000188000FFD20000000B2FDF00024A
-:100230000000000C1F800000000000002C070000E0
-:100240000000001091DE0000000000080500555578
-:10025000000000188000FFCC0000000C1F8000028E
-:100260000000000805005555000000188000FFC977
-:100270000000000C298000020000000C1F8000021A
-:10028000000000002ADF0000000000082A0000052E
-:100290000000000805005555000000188000FFC34D
-:1002A000000000080224004A0000001800040000BA
-:1002B000000000188000001C000000188000001ED4
-:1002C000000000188000006500000018800000BBDE
-:1002D00000000018800000BA000000188000000034
-:1002E00000000018800000000000001880000000DE
-:1002F00000000018800000000000001880000000CE
-:1003000000000018800000000000001880000000BD
-:1003100000000018800000000000001880000106A6
-:10032000000000188000000000000018800000009D
-:100330000000001880000015000000188000001B5D
-:10034000000000188000000000000018800000D1AC
-:10035000000000188000002F000000188000010637
-:10036000000000188000013100000018800000FC2F
-:100370000000001880000155000000188000004EA9
-:100380000000001880000000000000188000008EAF
-:100390000000000C1F8000010000000005000000AC
-:1003A000000000188000FFA20000001091D400009F
-:1003B0000000000C298000010000000C1F800001DB
-:1003C000000000082A0000020000000005000000F4
-:1003D000000000188000FF9C0000001091D4000075
-:1003E0000000000C298000010000000C1F800001AB
-:1003F0000000000029420000000000082A0000025E
-:100400000000000005000000000000188000FF95BB
-:10041000000000188000FF9400000010B1BCB00A7A
-:100420000000000B2FDF00020000000003D80000D6
-:10043000000000002C3C00000000001091D40000DF
-:100440000000000806005555000000188000001745
-:1004500000000018800000CA000000102C6201BAE1
-:100460000000001880000006000000082C80010D2C
-:10047000000000082D0000090000001091D40000C9
-:10048000000000082D8001070000001880000024F3
-:100490000000000C298000000000000C1F800000FC
-:1004A0000000001091DE0000000000002ADF0000C4
-:1004B000000000082A00000600000008050055554D
-:1004C000000000188000FF7E0000001091D40000A2
-:1004D0000000000C298000010000000C1F800001BA
-:1004E000000000082A00000B0000000005000000CA
-:1004F000000000188000FF780000001800020000D3
-:10050000000000000682000000000010B18A000810
-:1005100000000010B18C14070000000B050AFFFF5B
-:1005200000000010B18A000300000000860A1800D5
-:1005300000000010918C0000000000082A0000015B
-:100540000000001091D4000000000018000D000011
-:1005500000000000050200000000001091DE000015
-:1005600000000018000A00000000000006820000E1
-:100570000000001091DE000000000010BEE1000548
-:10058000000000188000FF5F0000000105611400FA
-:1005900000000010918A000200000008B0E1000194
-:1005A00000000018000D000000000000068200009E
-:1005B0000000001091DE000000000010BEE2000507
-:1005C000000000188000FF570000000105621400C1
-:1005D00000000010918A000200000008B1620001D2
-:1005E00000000018000D000000000010B1A0B013C2
-:1005F0000000000B2FDF0002000000002C20000094
-:10060000000000082C800000000000082D00000001
-:100610000000001091D400000000000806005555AD
-:10062000000000188000FFDC000000082D80011C85
-:1006300000000010001F0000000000188000FFE60E
-:100640000000000F476000080000000F060E0001C8
-:10065000000000000F580000000000000A640000C5
-:10066000000000000AE50000000000090B66FFFF23
-:10067000000000000D610000000000188000001361
-:100680000000000F476000080000000B2FDF000291
-:10069000000000082C800000000000082D00000071
-:1006A0000000001091D40000000000082D80011C03
-:1006B0000000000F060E000100000010001F0000E7
-:1006C000000000000F580000000000188000FFD458
-:1006D000000000000A640000000000000AE50000BD
-:1006E000000000090B66FFFF000000000D61000024
-:1006F00000000000026200000000000B2FDF00027B
-:10070000000000003104000000000000309A0000EA
-:10071000000000090560000F00000010B18A000A07
-:100720000000000005634C0000000008050A0012EC
-:1007300000000010B9621403000000000300000074
-:100740000000001880000005000000188000FF2451
-:1007500000000010B60614030000000803060001A4
-:10076000000000188000FF2A000000000C9618000E
-:10077000000000090C99FFFF00000004CC99340030
-:1007800000000010B1963202000000080F80000047
-:100790000000000C298000010000000C295200011B
-:1007A0000000000C29520000000000080200000EAA
-:1007B000000000080280001A00000010B1C40A0204
-:1007C00000000008020000030000000822000001F1
-:1007D0000000000C1F800001000000002ADF000064
-:1007E000000000002A000800000000080500555520
-:1007F000000000188000FF180000000B2FDF00022F
-:100800000000001091D40000000000082A00000140
-:10081000000000002C2000000000001091D4000017
-:10082000000000082C800000000000082D000000DF
-:10083000000000082D80011C000000188000FFA3AC
-:10084000000000082C800006000000082D000006B3
-:1008500000000000308000000000000031000000B7
-:10086000000000082D8000060000000C2980000117
-:100870000000000C1F8000010000001091DE00004D
-:10088000000000002ADF0000000000082A0000101D
-:100890000000000005000000000000188000FF03B9
-:1008A0000000001091A0B009000000082C80010D8C
-:1008B000000000082D0000090000001091D4000085
-:1008C000000000082D800107000000188000FF9C38
-:1008D000000000188000001000000008AC000001BB
-:1008E000000000188000000B000000000380B00032
-:1008F0000000000B2FDF0002000000002C00400071
-:100900000000001091D400000000000806005555BA
-:10091000000000188000FF7E0000001880000031F9
-:1009200000000018800000060000000B2FDF00020E
-:10093000000000002C000E00000000082A00000744
-:100940000000000805005555000000188000FEED6D
-:1009500000000000068200000000000C2980000159
-:100960000000000C1F800001000000100CE70007D1
-:10097000000000090562FFFF00000010BA6C1405BA
-:10098000000000002ADF000000000000210000003D
-:10099000000000082A0000050000001091D40000AB
-:1009A000000000082C80010C000000082D00000849
-:1009B0000000000C31620018000000082D800001CA
-:1009C000000000188000FF7200000018000D0000F9
-:1009D00000000010B1A0B00E0000000B2FDF0002DD
-:1009E0000000000003D80000000000002C200000E0
-:1009F0000000001091D400000000001880000015D5
-:100A0000000000102C620002000000188000000CA2
-:100A10000000000B2FDF0002000000002C07000088
-:100A20000000000C1F8000010000001091DE00009B
-:100A3000000000080500FFFF000000188000FECF46
-:100A4000000000082C80010D000000082D000009A6
-:100A50000000001091D40000000000082D80010764
-:100A6000000000188000FF690000000C29800001D0
-:100A70000000000C1F8000010000001091DE00004B
-:100A8000000000002ADF0000000000082A00000A21
-:100A90000000000005000000000000188000FEC3F8
-:100AA0000000000006820000000000082C80010CFD
-:100AB000000000082D000008000000082D8001340F
-:100AC000000000000000000000000010205F000097
-:100AD000000000082C800140000000082D00003CB0
-:100AE000000000082D80012400000000000000002C
-:100AF0000000001091DE0000000000082C80008043
-:100B0000000000082D000000000000082D800105F5
-:100B100000000010BEE20005000000188000FEACDE
-:100B2000000000010562140000000010918A00021C
-:100B300000000008B16200010000001091DE00001A
-:100B400000000018000D00000000001091D400000B
-:100B5000000000080600AAAA000000188000FF3567
-:100B60000000000C298000010000000C1F80000123
-:100B7000000000082A000009000000080500AAAAD9
-:100B8000000000188000FEA60000001091D40000B4
-:100B90000000000806005555000000188000FF2DD9
-:100BA0000000001091A03C0200000010B1E66207B6
-:100BB0000000000B2FDF0002000000002C310000BD
-:100BC000000000092CB1007F000000082CD90000B3
-:100BD000000000082D000000000000082D80010D1D
-:100BE00000000010B1A8000600000010205F000007
-:100BF000000000002C200000000000002CA70000D6
-:100C0000000000082D000010000000082D800108E1
-:100C1000000000188000FF2800000010B1A600109E
-:100C200000000010001F00000000000F0F30000740
-:100C3000000000000A600000000000000AE100005F
-:100C40000000000F4B620008000000090B1600FFB7
-:100C5000000000000D620000000000090D1A00FFF6
-:100C600000000010073000030000000C0D1A0008FF
-:100C70000000000C0B1600080000000F4CE30018E9
-:100C8000000000000C992C0000000004CC993400F6
-:100C9000000000080F8000000000000C2980000107
-:100CA00000000000333100000000000822000016A0
-:100CB000000000002ADF0000000000082A00000CED
-:100CC00000000010009F0000000000000F20000046
-:100CD0000000000C1F8000010000000805005555B1
-:100CE000000000188000FE7A0000001091D400007F
-:100CF000000000080600AAAA000000188000FF01FA
-:100D00000000000F4722000800000009070E000F36
-:100D100000000008070E0008000000080280000123
-:100D20000000000702851C00000000088285000109
-:100D30000000000002854C000000000742851C00F6
-:100D400000000003C3AA52000000000003B10E001F
-:100D5000000000074B071C000000000F0F300007C9
-:100D60000000000F0A960003000000000A955C00D6
-:100D7000000000004A005A00000000000C960A0023
-:100D8000000000090C99FFFF000000080D00FFFFA4
-:100D900000000010B1963202000000080F8000052C
-:100DA00000000010B1A8000800000010205F000043
-:100DB0000000000B2FDF0002000000002C200000CC
-:100DC000000000002CA70000000000082D0000100B
-:100DD000000000082D800108000000188000FEEFD0
-:100DE0000000000C2980000100000010001F00001E
-:100DF0000000000C1F800001000000002ADF00003E
-:100E0000000000082A00000D000000080500AAAA42
-:100E1000000000188000FE540000001091D4000073
-:100E20000000000806005555000000188000FEDB99
-:100E30000000000C298000010000000C1F80000150
-:100E4000000000082A0000070000000805005555B2
-:080E5000000000188000FE4CB8
-:080E580000000010B18000044D
-:100E60000000001F0503030000000008050000FF4C
-:100E70000000001800020000000000002A0000002E
-:100E800000000010B1D400000000001091DE00004E
-:100E9000000000102053000000000010001F0000A0
-:100EA000000000002F80AA000000000C2980000133
-:100EB000000000080254000E000000002C4000005A
-:100EC000000000092952003F000000180004000043
-:100ED00000000018800000100000001880000011C1
-:100EE000000000188000003900000018800000FD9C
-:100EF00000000018800000FC00000018800000FBCB
-:100F000000000018800000FB0000001880000000B6
-:100F1000000000188000011300000018800000F796
-:100F2000000000188000000B00000018800001176E
-:100F300000000018800001650000001880000063B8
-:100F400000000018800000CE00000018800000DEC5
-:100F5000000000002A000000000000188000FFE5EB
-:100F6000000000002A0000000000000C29800000A2
-:100F7000000000188000FFE2000000002A000000CE
-:100F8000000000188000FFE00000001800020000D0
-:100F900000000000050200000000001091963421BE
-:100FA00000000010205F0000000000002C1E000068
-:100FB000000000082C800006000000082D0000063C
-:100FC000000000082D800102000000000000000069
-:100FD0000000001091DE0000000000000D61000024
-:100FE00000000018000A00000000000005020000D8
-:100FF000000000109196341600000010205F0000E1
-:101000000000000009D80000000000002C1E0000B5
-:10101000000000082C80010E000000082D00000ACE
-:10102000000000082D800102000000000000000008
-:101030000000001091DE0000000000000D620000C2
-:10104000000000002C13000000000018000A00003F
-:101050000000000005020000000000109196340915
-:1010600000000010205F0000000000002C1E0000A7
-:10107000000000082C800006000000082D00006A17
-:10108000000000082D8001020000000000000000A8
-:101090000000001091DE0000000000000D7A00004A
-:1010A00000000018000A0000000000002A000000F4
-:1010B000000000000D61000000000000036200005D
-:1010C00000000010234200C10000000002638C00F9
-:1010D0000000000026460000000000080204001284
-:1010E00000000010B9060827000000000F5800009B
-:1010F000000000000A640000000000000AE5000093
-:10110000000000090B66FFFF000000000C0000005B
-:10111000000000000B800000000000080CC6001258
-:10112000000000188000FFCE000000080F800003C0
-:10113000000000000000000000000010009F000000
-:101140000000000827110012000000006690000057
-:1011500000000008A31B001200000010B19800035B
-:1011600000000010001F0000000000080F800004B5
-:101170000000000822000003000000082C80000C82
-:10118000000000082D00000C00000010009F00006F
-:1011900000000000259600000000000C29800000DF
-:1011A00000000000066600000000000086611800D4
-:1011B000000000090260000F0000000F020400029E
-:1011C00000000010B60C08050000000C1FBF000056
-:1011D000000000102866000300000008078F0001CF
-:1011E0000000000C33660010000000003214000004
-:1011F00000000000329500000000000573662C001E
-:101200000000000031E32E00000000082D800010D7
-:10121000000000188000FF8E000000002300000086
-:101220000000000925E6FFFF000000082200000B77
-:101230000000000C695200000000000C2980000032
-:101240000000001028660075000000188000FF876D
-:10125000000000002A000000000000082C80004070
-:10126000000000082D000020000000082D80011C57
-:1012700000000000000000000000001091DE0000EF
-:101280000000000F42EA001000000010004F0004B0
-:1012900000000010B746920000000008024900124A
-:1012A00000000010B5840A00000000000D6100007D
-:1012B00000000010BA6634570000000883050012D1
-:1012C00000000010004F0002000000000349000071
-:1012D0000000000183068C000000000083C60C00A3
-:1012E00000000010B1870011000000000B6E00002C
-:1012F00000000010BEE90005000000188000FF6E2D
-:10130000000000010569140000000010918A00022D
-:1013100000000008B4E9000100000010B1E92C4A07
-:101320000000000086692C000000000002000000A0
-:101330000000000902EAFFFF00000010000C00029C
-:101340000000000002040A000000000F460C00012B
-:101350000000000F0285000100000010918C01FCCC
-:1013600000000010B7040E41000000000F40000014
-:10137000000000000D610000000000000A64000091
-:10138000000000000AE50000000000090B66FFFFF6
-:10139000000000000C000000000000000B800000B6
-:1013A000000000080C860012000000080F800003F7
-:1013B0000000000C2952000000000010009F0000F7
-:1013C00000000008271100120000000066900000D5
-:1013D0000000000026460000000000002306000078
-:1013E00000000010B198000500000010001F000070
-:1013F000000000080F800004000000000000000052
-:1014000000000010001F0000000000003214000067
-:1014100000000000329500000000000031E32E00C3
-:101420000000000573662C000000000025960000F7
-:1014300000000010B18700160000000C2980000099
-:101440000000000F0F6B0007000000000D69000096
-:10145000000000000A6C0000000000000AED00001F
-:10146000000000000B6E0000000000000B80000078
-:10147000000000000C870000000000080F8000033F
-:1014800000000010205300000000000C6952000111
-:1014900000000010001F00000000000022C58C00AA
-:1014A00000000000231B00000000000027110000C6
-:1014B000000000002690000000000010B8170E0386
-:1014C0000000000C29800000000000188000FFF6DA
-:1014D00000000010B1980002000000080F80000416
-:1014E000000000082200001A000000082C80000CF8
-:1014F000000000082D00000C000000082D800010E6
-:1015000000000010001F0000000000000D6E000031
-:1015100000000003E7CF34000000000C2980000029
-:101520000000001091DE000000000010B1870007ED
-:101530000000000036140000000000003695000096
-:101540000000000037160000000000082C8000504A
-:10155000000000082D000030000000082D80000C65
-:10156000000000188000FF24000000002646000054
-:1015700000000000230000000000000925E6FFFF36
-:10158000000000000B6E000000000003E7CF2C00FD
-:10159000000000082200001B0000000C695200003F
-:1015A0000000000C29800000000000188000FF1BD4
-:1015B000000000002A00000000000010086600057E
-:1015C00000000000066600000000000086611800B0
-:1015D00000000009026000F000000010B60C0802D4
-:1015E000000000188000FF140000000006820000C8
-:1015F00000000010B18F000000000008878F00017C
-:101600000000000C73660010000000082C80001819
-:10161000000000082D000018000000082D800002C6
-:101620000000000C5FBF00000000001091DE000011
-:1016300000000018000D0000000000002A0000005B
-:1016400000000010286601F5000000082C8000034F
-:10165000000000082D000003000000093060FFF0CA
-:10166000000000082D8000010000000C298000000F
-:101670000000001091DE0000000000082C80001A1D
-:10168000000000082D00001A00000005736600002D
-:10169000000000082D8000020000000031800000E2
-:1016A0000000001091DE0000000000082C80000CFB
-:1016B000000000082D00000C000000082D80000430
-:1016C000000000188000FEF8000000180002000072
-:1016D000000000188000FEF6000000002A00000054
-:1016E00000000010001F0000000000000F0080003C
-:1016F000000000080F800007000000188000001A9A
-:1017000000000000280A00000000000005020000A0
-:10171000000000082200000900000000290000006D
-:101720000000000F6568001000000003F66C9400D4
-:1017300000000010B972A0040000000C73E700194B
-:101740000000000C21420004000000003CF80000F2
-:101750000000000C29800000000000102053000051
-:1017600000000008220000080000000C6142000494
-:1017700000000018000A0000000000000502000040
-:101780000000000C61420000000000100142000354
-:101790000000000C33E7001D0000000C6142000255
-:1017A00000000018000A0000000000002A000000ED
-:1017B00000000010001F00000000000F0F4700078E
-:1017C000000000080F8000080000000C29800000C5
-:1017D00000000010009F0000000000188000FED5EF
-:1017E0000000000033510000000000002A0000004B
-:1017F00000000010B1C600230000000F0F500007CA
-:10180000000000000A600000000000000AE1000083
-:101810000000000F4B620008000000090B1600FFDB
-:101820000000000F4C620010000000000D6200007C
-:10183000000000090D1A00FF00000010075000030F
-:101840000000000C0D1A00080000000C0B16000828
-:10185000000000000CC60000000000000B8000002B
-:101860000000000006980000000000080F80000340
-:101870000000001006C200040000000C2900000255
-:1018800000000010264200020000000C2952000354
-:10189000000000082200000100000010009F00006E
-:1018A00000000000231B00000000000027111A00A8
-:1018B00000000000669000000000000C29520000AB
-:1018C00000000010B19732090000000C29800000D0
-:1018D00000000000069800000000001020530000E7
-:1018E0000000000C295200030000000022C58C00FB
-:1018F00000000010001F0000000000080F8000031F
-:10190000000000188000FFF300000010B1C80013B1
-:1019100000000010B1C600030000000C2980000088
-:1019200000000010205300000000000C29520000AD
-:101930000000000C295200030000001006C2000243
-:101940000000000C295200020000000022C58C009B
-:1019500000000000276500000000000026E40000F1
-:10196000000000082200001600000010B1C60003AD
-:10197000000000002348000000000010B1800005B6
-:1019800000000000234800000000000C2980000037
-:101990000000000F0F500007000000188000001228
-:1019A00000000008220000160000000C2980000042
-:1019B000000000003014000000000000309500001E
-:1019C0000000001007500003000000090B1600FF84
-:1019D000000000090D1A00FF0000000F311600087A
-:1019E000000000003162340000000003F1623000AA
-:1019F00000000010205F0000000000002C510000DB
-:101A0000000000092CD1007F000000082CD9000044
-:101A1000000000082D000000000000082D80000CD0
-:101A200000000000000000000000001091DE000037
-:101A30000000001005C20004000000080F8000072D
-:101A4000000000003300000000000010009F0000B4
-:101A5000000000188000FE86000000002A00000040
-:101A60000000000F0F50000700000010B1C6002D4D
-:101A70000000000F4742000800000009070E000F99
-:101A800000000008070E000800000010001F000002
-:101A900000000008090000010000000709121C00F6
-:101AA00000000003CBCA9200000000000B97A200C8
-:101AB0000000000742171C00000000000B0400009B
-:101AC0000000000F0A840003000000000A959C003B
-:101AD000000000004A009A00000000088212000185
-:101AE000000000010C170800000000000C978C009B
-:101AF0000000000002180000000000080D00FFFFB9
-:101B0000000000080F8000060000000C2900000003
-:101B10000000001006C200040000000C2952000260
-:101B200000000010264200020000000C29520003B1
-:101B3000000000082200000100000010009F0000CB
-:101B400000000010B197320C00000000231B0000C1
-:101B5000000000002711080000000000669000004F
-:101B60000000000C298000000000000002180000A6
-:101B700000000010205300000000000C2952000358
-:101B80000000000022C5360000000010001F000009
-:101B9000000000080F800006000000188000FFF41D
-:101BA00000000000231B00000000000027110800B7
-:101BB000000000006690000000000010B1C8000B9B
-:101BC0000000000C298000000000001020530000DD
-:101BD0000000000C295200000000000C29520003F4
-:101BE0000000001006C200020000000C2952000292
-:101BF0000000000022C58C000000000027650000E6
-:101C00000000000026E4000000000000234800005F
-:101C100000000008220000170000000C29800000CE
-:101C200000000010001F0000000000188000FE4BA4
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw.ihex b/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw.ihex
new file mode 100644
index 000000000000..f325e6904edb
--- /dev/null
+++ b/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw.ihex
@@ -0,0 +1,499 @@
+:100000000000000000000E80000000580000000901
+:1000100000000000000000000000000000000000E0
+:1000200000000000000000000000000000000000D0
+:1000300000000FA800000ED800000005000000001E
+:1000400000000000000000000000000000000000B0
+:080050000000000000000000A8
+:0800580000000010B180000659
+:100060000000001F03030300000000080500FFFF5D
+:10007000000000180002000000000008050000FF5A
+:10008000000000180002000000000008AC000001A1
+:1000900000000000050000000000000C2F8000019F
+:1000A000000000002B000000000000002B8000007A
+:1000B0000000001091E0000200000008AC00000108
+:1000C00000000010203F006B00000010213F0003E3
+:1000D0000000001020BF003A000000188000FFFD63
+:1000E00000000010B1B8B0150000000B2FDF0002B7
+:1000F0000000000003D80000000000002C380000C1
+:10010000000000082C800000000000082D00000006
+:100110000000001091D400000000000806005555B2
+:10012000000000188000008F000000082D80011CD6
+:1001300000000008020000010000001091DE000035
+:100140000000000F42E0001C0000001091840A161D
+:1001500000000018800000960000000C29800002BA
+:100160000000000C1F800002000000002ADF0000D9
+:10017000000000082A00000F000000000500000039
+:10018000000000188000FFE60000000802000001E7
+:100190000000000F42E0001C0000001091840A18CB
+:1001A000000000082C800006000000082D0000065A
+:1001B0000000001091D40000000000082D8001060E
+:1001C0000000001880000085000000188000FFF18A
+:1001D00000000008B1000001000000082C80010CA4
+:1001E000000000082D000008000000082D8000011C
+:1001F000000000188000007F0000000B2FDF0002CD
+:100200000000000C1F800002000000002C0700000E
+:100210000000001091DE00000000000805005555A8
+:10022000000000188000FFD20000000B2FDF00024A
+:100230000000000C1F800000000000002C070000E0
+:100240000000001091DE0000000000080500555578
+:10025000000000188000FFCC0000000C1F8000028E
+:100260000000000805005555000000188000FFC977
+:100270000000000C298000020000000C1F8000021A
+:10028000000000002ADF0000000000082A0000052E
+:100290000000000805005555000000188000FFC34D
+:1002A000000000080224004A0000001800040000BA
+:1002B000000000188000001C000000188000001ED4
+:1002C000000000188000007800000018800000CBBB
+:1002D00000000018800000CA000000188000000024
+:1002E00000000018800000000000001880000000DE
+:1002F00000000018800000000000001880000000CE
+:1003000000000018800000000000001880000000BD
+:100310000000001880000000000000188000011696
+:10032000000000188000000000000018800000009D
+:100330000000001880000015000000188000001B5D
+:10034000000000188000000000000018800000E19C
+:10035000000000188000002F000000188000011627
+:100360000000001880000141000000188000010C0E
+:100370000000001880000165000000188000006186
+:100380000000001880000000000000188000009E9F
+:100390000000000C1F8000010000000005000000AC
+:1003A000000000188000FFA20000001091D400009F
+:1003B0000000000C298000010000000C1F800001DB
+:1003C000000000082A0000020000000005000000F4
+:1003D000000000188000FF9C0000001091D4000075
+:1003E0000000000C298000010000000C1F800001AB
+:1003F0000000000029420000000000082A0000025E
+:100400000000000005000000000000188000FF95BB
+:10041000000000188000FF9400000010B1BCB00A7A
+:100420000000000B2FDF00020000000003D80000D6
+:10043000000000002C3C00000000001091D40000DF
+:100440000000000806005555000000188000002A32
+:1004500000000018800000DA000000102C6201BAD1
+:100460000000001880000006000000082C80010D2C
+:10047000000000082D0000090000001091D40000C9
+:10048000000000082D8001070000001880000037E0
+:100490000000000C298000000000000C1F800000FC
+:1004A0000000001091DE0000000000002ADF0000C4
+:1004B000000000082A00000600000008050055554D
+:1004C000000000188000FF7E0000001091D40000A2
+:1004D0000000000C298000010000000C1F800001BA
+:1004E000000000082A00000B0000000005000000CA
+:1004F000000000188000FF780000000002020000E9
+:1005000000000000029A000000000000060C2C0011
+:1005100000000004C60C340000000010001F0000A2
+:1005200000000010B196180C0000000806960004A8
+:1005300000000009068DFFFC00000004CD051A0034
+:1005400000000004CC9A18000000001020D7000022
+:100550000000000C2B56000000000000000000000E
+:1005600000000000000000000000001020D7000084
+:10057000000000080F80000100000010B18001F4AD
+:1005800000000010001F00000000000C6B5600006F
+:1005900000000018000400000000000006820000B7
+:1005A00000000010B18A000800000010B18C140790
+:1005B0000000000B050AFFFF00000010B18A0003D5
+:1005C00000000000860A180000000010918C000056
+:1005D000000000082A0000010000001091D4000073
+:1005E00000000018000D00000000000005020000DF
+:1005F0000000001091DE000000000018000A00005A
+:1006000000000000068200000000001091DE0000E3
+:1006100000000010BEE10005000000188000FF4C43
+:10062000000000010561140000000010918A000222
+:1006300000000008B0E1000100000018000D0000FB
+:1006400000000000068200000000001091DE0000A3
+:1006500000000010BEE20005000000188000FF440A
+:10066000000000010562140000000010918A0002E1
+:1006700000000008B162000100000018000D000039
+:1006800000000010B1A0B0130000000B2FDF00022B
+:10069000000000002C200000000000082C8000005A
+:1006A000000000082D0000000000001091D40000A0
+:1006B0000000000806005555000000188000FFDC0F
+:1006C000000000082D80011C00000010001F000029
+:1006D000000000188000FFE60000000F47600008DF
+:1006E0000000000F060E0001000000000F5800007F
+:1006F000000000000A640000000000000AE500009D
+:10070000000000090B66FFFF000000000D61000003
+:1007100000000018800000130000000F4760000870
+:100720000000000B2FDF0002000000082C800000FA
+:10073000000000082D0000000000001091D400000F
+:10074000000000082D80011C0000000F060E0001B3
+:1007500000000010001F0000000000000F58000003
+:10076000000000188000FFD4000000000A640000B0
+:10077000000000000AE50000000000090B66FFFF12
+:10078000000000000D610000000000000262000097
+:100790000000000B2FDF0002000000003104000009
+:1007A00000000000309A0000000000090560000F02
+:1007B00000000010B18A000B0000000005634C002F
+:1007C00000000008050A001200000010B9621403BE
+:1007D0000000000003000000000000188000000678
+:1007E000000000188000FF1100000010B60614047D
+:1007F0000000000803060001000000082A000001B4
+:10080000000000188000FF16000000188000FF9E06
+:100810000000000C298000010000000C295200019A
+:100820000000000C29520000000000080200000E29
+:10083000000000080280001A00000010B1C40A0283
+:100840000000000802000003000000082200000170
+:100850000000000C1F800001000000002ADF0000E3
+:10086000000000002A00080000000008050055559F
+:10087000000000188000FF080000000B2FDF0002BE
+:100880000000001091D40000000000082A000001C0
+:10089000000000002C2000000000001091D4000097
+:1008A000000000082C800000000000082D0000005F
+:1008B000000000082D80011C000000188000FFA629
+:1008C000000000082C800006000000082D00000633
+:1008D0000000000030800000000000003100000037
+:1008E000000000082D8000060000000C2980000197
+:1008F0000000000C1F8000010000001091DE0000CD
+:10090000000000002ADF0000000000082A0000109C
+:100910000000000005000000000000188000FEF349
+:100920000000001091A0B009000000082C80010D0B
+:10093000000000082D0000090000001091D4000004
+:10094000000000082D800107000000188000FF9FB4
+:10095000000000188000001000000008AC0000013A
+:10096000000000188000000B000000000380B000B1
+:100970000000000B2FDF0002000000002C004000F0
+:100980000000001091D4000000000008060055553A
+:10099000000000188000FF81000000188000003176
+:1009A00000000018800000060000000B2FDF00028E
+:1009B000000000002C000E00000000082A000007C4
+:1009C0000000000805005555000000188000FEDDFD
+:1009D00000000000068200000000000C29800001D9
+:1009E0000000000C1F800001000000100CE7000751
+:1009F000000000090562FFFF00000010BA6C14053A
+:100A0000000000002ADF00000000000021000000BC
+:100A1000000000082A0000050000001091D400002A
+:100A2000000000082C80010C000000082D000008C8
+:100A30000000000C31620018000000082D80000149
+:100A4000000000188000FF7500000018000D000075
+:100A500000000010B1A0B00E0000000B2FDF00025C
+:100A60000000000003D80000000000002C2000005F
+:100A70000000001091D40000000000188000001554
+:100A8000000000102C620002000000188000000C22
+:100A90000000000B2FDF0002000000002C07000008
+:100AA0000000000C1F8000010000001091DE00001B
+:100AB000000000080500FFFF000000188000FEBFD6
+:100AC000000000082C80010D000000082D00000926
+:100AD0000000001091D40000000000082D800107E4
+:100AE000000000188000FF6C0000000C298000014D
+:100AF0000000000C1F8000010000001091DE0000CB
+:100B0000000000002ADF0000000000082A00000AA0
+:100B10000000000005000000000000188000FEB387
+:100B20000000000006820000000000082C80010C7C
+:100B3000000000082D000008000000082D8001348E
+:100B4000000000000000000000000010205F000016
+:100B5000000000082C800140000000082D00003C2F
+:100B6000000000082D80011C0000000000000000B3
+:100B70000000001091DE0000000000082C800080C2
+:100B8000000000082D000000000000082D80010575
+:100B900000000010BEE20005000000188000FE9C6E
+:100BA000000000010562140000000010918A00029C
+:100BB00000000008B16200010000001091DE00009A
+:100BC00000000018000D00000000001091D400008B
+:100BD000000000080600AAAA000000188000FF38E4
+:100BE0000000000C298000010000000C1F800001A3
+:100BF000000000082A000009000000080500AAAA59
+:100C0000000000188000FE960000001091D4000043
+:100C10000000000806005555000000188000FF3055
+:100C20000000001091A03C0200000010B1E6620735
+:100C30000000000B2FDF0002000000002C3100003C
+:100C4000000000092CB1007F000000082CD9000032
+:100C5000000000082D000000000000082D80010D9C
+:100C600000000010B1A8000600000010205F000086
+:100C7000000000002C200000000000002CA7000055
+:100C8000000000082D000010000000082D80010861
+:100C9000000000188000FF2B00000010B1A600101B
+:100CA00000000010001F00000000000F0F300007C0
+:100CB000000000000A600000000000000AE10000DF
+:100CC0000000000F4B620008000000090B1600FF37
+:100CD000000000000D620000000000090D1A00FF76
+:100CE00000000010073000030000000C0D1A00087F
+:100CF0000000000C0B1600080000000F4CE3001869
+:100D0000000000000C992C0000000004CC99340075
+:100D1000000000080F8000000000000C2980000186
+:100D2000000000003331000000000008220000161F
+:100D3000000000002ADF0000000000082A00000C6C
+:100D400000000010009F0000000000000F200000C5
+:100D50000000000C1F800001000000080500555530
+:100D6000000000188000FE6A0000001091D400000E
+:100D7000000000080600AAAA000000188000FF0476
+:100D80000000000F4722000800000009070E000FB6
+:100D900000000008070E00080000000802800001A3
+:100DA0000000000702851C00000000088285000189
+:100DB0000000000002854C000000000742851C0076
+:100DC00000000003C3AA52000000000003B10E009F
+:100DD000000000074B071C000000000F0F30000749
+:100DE0000000000F0A960003000000000A955C0056
+:100DF000000000004A005A00000000000C960A00A3
+:100E0000000000090C99FFFF000000080D00FFFF23
+:100E100000000010B1963202000000080F800005AB
+:100E200000000010B1A8000800000010205F0000C2
+:100E30000000000B2FDF0002000000002C2000004B
+:100E4000000000002CA70000000000082D0000108A
+:100E5000000000082D800108000000188000FEF24C
+:100E60000000000C2980000100000010001F00009D
+:100E70000000000C1F800001000000002ADF0000BD
+:100E8000000000082A00000D000000080500AAAAC2
+:100E9000000000188000FE440000001091D4000003
+:100EA0000000000806005555000000188000FEDE16
+:100EB0000000000C298000010000000C1F800001D0
+:100EC000000000082A000007000000080500555532
+:080ED000000000188000FE3C48
+:080ED80000000010B1800004CD
+:100EE0000000001F0303030000000008050000FFCE
+:100EF0000000001800020000000000002A000000AE
+:100F000000000010B1D400000000001091DE0000CD
+:100F1000000000102053000000000010001F00001F
+:100F20000000000C6BD70001000000002F80AA0019
+:100F30000000000C29800001000000080254000F8E
+:100F4000000000002C400000000000092952003F72
+:100F500000000018000400000000001880000010CD
+:100F60000000001880000011000000188000004AF6
+:100F700000000018800001280000001880000127F0
+:100F800000000018800001260000001880000126E3
+:100F90000000001880000000000000188000013FE1
+:100FA0000000001880000122000000188000000BE3
+:100FB0000000001880000145000000188000019A20
+:100FC000000000188000007B00000018800000F97D
+:100FD0000000001880000109000000002A00000045
+:100FE000000000188000FFE4000000002A0000005C
+:100FF0000000000C29800000000000188000FFE1C4
+:10100000000000002A000000000000188000FFDF40
+:101010000000000003820000000000188000FFDADA
+:10102000000000010C161400000000008C181400D1
+:101030000000001091980003000000080C960002C8
+:1010400000000010B1800003000000080C960001B1
+:10105000000000000C000000000000000D1900005E
+:1010600000000010205600000000000C2BD70001EB
+:10107000000000080F8000010000000000000000D8
+:1010800000000010001F00000000000C6BD70001E2
+:1010900000000010011301F100000018000700001B
+:1010A00000000000050200000000001091963421AD
+:1010B00000000010205F0000000000002C1E000057
+:1010C000000000082C800006000000082D0000062B
+:1010D000000000082D800102000000000000000058
+:1010E0000000001091DE0000000000000D61000013
+:1010F00000000018000A00000000000005020000C7
+:10110000000000109196341600000010205F0000CF
+:101110000000000009D80000000000002C1E0000A4
+:10112000000000082C80010E000000082D00000ABD
+:10113000000000082D8001020000000000000000F7
+:101140000000001091DE0000000000000D620000B1
+:10115000000000002C13000000000018000A00002E
+:101160000000000005020000000000109196340904
+:1011700000000010205F0000000000002C1E000096
+:10118000000000082C800006000000082D00006A06
+:10119000000000082D800102000000000000000097
+:1011A0000000001091DE0000000000000D7A000039
+:1011B00000000018000A0000000000002A000000E3
+:1011C000000000000D61000000000000036200004C
+:1011D00000000010234200DB0000000002638C00CE
+:1011E0000000000026460000000000080204001273
+:1011F00000000010B906082E000000000F58000083
+:10120000000000000A640000000000000AE5000081
+:10121000000000090B66FFFF000000000C0000004A
+:10122000000000000B800000000000080CC6001247
+:10123000000000188000FFCE0000001020560000C3
+:101240000000000C2BD70001000000080F800003F5
+:10125000000000000000000000000010001F00005F
+:101260000000000C6BD700010000000827110012DD
+:10127000000000006690000000000008A31B0012A0
+:1012800000000010B198000600000010001F0000D0
+:101290000000000C6BD70001000000102056000079
+:1012A0000000000C2BD70001000000080F80000494
+:1012B0000000000822000003000000082C80000C41
+:1012C000000000082D00000C00000010001F0000AE
+:1012D0000000000C6BD70001000000002596000004
+:1012E0000000000C298000000000000006660000DD
+:1012F0000000000086611800000000090260000F75
+:101300000000000F0204000200000010B60C0805E7
+:101310000000000C1FBF0000000000102866000342
+:1013200000000008078F00010000000C3366001069
+:1013300000000000321400000000000032950000A0
+:101340000000000573662C000000000031E32E0051
+:10135000000000082D800010000000188000FF75BC
+:1013600000000000230000000000000925E6FFFF48
+:10137000000000082200000B0000000C6952000071
+:101380000000000C29800000000000102866008882
+:10139000000000188000FF6E000000002A0000001E
+:1013A000000000082C800040000000082D000020F4
+:1013B000000000082D80011C00000000000000005B
+:1013C0000000001091DE00000000000F42EA001053
+:1013D00000000010004F000400000010B74692000B
+:1013E000000000080249001200000010B5840A0045
+:1013F000000000000D61000000000010BA66346AB1
+:10140000000000088305001200000010004F0002D9
+:1014100000000000034900000000000183068C006A
+:101420000000000083C60C0000000010B18700110E
+:10143000000000000B6E000000000010BEE9000577
+:10144000000000188000FF5500000001056914002D
+:1014500000000010918A000200000008B4E90001B9
+:1014600000000010B1E92C5D0000000086692C002E
+:1014700000000000020000000000000902EAFFFF77
+:1014800000000010000C00020000000002040A002E
+:101490000000000F460C00010000000F0285000153
+:1014A00000000010918C01FC00000010B7040E54E5
+:1014B000000000000F400000000000000D6100006F
+:1014C000000000000A640000000000000AE50000BF
+:1014D000000000090B66FFFF000000000C00000088
+:1014E000000000000B800000000000080C860012C5
+:1014F00000000010205600000000000C2BD7000157
+:10150000000000080F8000030000000C29520000BA
+:1015100000000010001F00000000000C6BD700014D
+:101520000000000827110012000000006690000073
+:101530000000000026460000000000002306000016
+:1015400000000010B198000900000010001F00000A
+:101550000000000C6BD700010000001020560000B6
+:101560000000000C2BD70001000000080F800004D1
+:10157000000000000000000000000010001F00003C
+:101580000000000C6BD700010000000032140000C6
+:1015900000000000329500000000000031E32E0042
+:1015A0000000000573662C00000000002596000076
+:1015B00000000010B18700210000000C298000000D
+:1015C0000000000F0F6B0007000000000D69000015
+:1015D000000000000A6C0000000000000AED00009E
+:1015E000000000000B6E0000000000000B800000F7
+:1015F000000000000C870000000000188000FF1EA3
+:10160000000000010C161400000000008C181400EB
+:10161000000000080C9600010000001091980002E4
+:10162000000000080C990001000000000D190000E6
+:10163000000000000C000000000000102056000018
+:101640000000000C2BD70001000000080F800001F3
+:1016500000000010205300000000000C695200013F
+:1016600000000010001F00000000000C6BD70001FC
+:101670000000000022C58C000000000023120000C2
+:10168000000000002711000000000000269000006C
+:1016900000000010B8170E030000000C29800000A5
+:1016A000000000188000FFEB0000000082970E0091
+:1016B00000000000A3120A00000000082200001A27
+:1016C000000000082C80000C000000082D00000C19
+:1016D000000000082D80001000000010001F000016
+:1016E0000000000C6BD70001000000000D6E000030
+:1016F00000000003E7CF34000000000C2980000048
+:101700000000001091DE000000000010B18700070B
+:1017100000000000361400000000000036950000B4
+:101720000000000037160000000000082C80005068
+:10173000000000082D000030000000082D80000C83
+:10174000000000188000FEF800000000264600009F
+:1017500000000000230000000000000925E6FFFF54
+:10176000000000000B6E000000000003E7CF2C001B
+:10177000000000082200001B0000000C695200005D
+:101780000000000C29800000000000188000FEEF1F
+:10179000000000002A00000000000010086600059C
+:1017A00000000000066600000000000086611800CE
+:1017B00000000009026000F000000010B60C0802F2
+:1017C000000000188000FEE8000000000682000013
+:1017D00000000010B18F000000000008878F00019A
+:1017E0000000000C73660010000000082C80001838
+:1017F000000000082D000018000000082D800002E5
+:101800000000000C5FBF00000000001091DE00002F
+:1018100000000018000D0000000000002A00000079
+:1018200000000010286601F5000000082C8000036D
+:10183000000000082D000003000000093060FFF0E8
+:10184000000000082D8000010000000C298000002D
+:101850000000001091DE0000000000082C80001A3B
+:10186000000000082D00001A00000005736600004B
+:10187000000000082D800002000000003180000000
+:101880000000001091DE0000000000082C80000C19
+:10189000000000082D00000C000000082D8000044E
+:1018A000000000188000FECC0000001800020000BC
+:1018B000000000188000FECA000000002A0000009E
+:1018C00000000010001F00000000000C6BD700019A
+:1018D000000000000F008000000000080F800007DB
+:1018E000000000188000001B00000000280A000013
+:1018F00000000000050200000000000822000009AE
+:1019000000000000290000000000000F65680010C2
+:1019100000000003F66C940000000010B972A004EF
+:101920000000000C73E700190000000C21420004C5
+:10193000000000003CF800000000000C29800000BE
+:1019400000000010205300000000000822000008E2
+:101950000000000C6142000400000018000A0000B2
+:1019600000000000050200000000000C61420000C1
+:1019700000000010014200030000000C33E7001DCE
+:101980000000000C6142000200000018000A000084
+:10199000000000002A00000000000010001F0000EE
+:1019A0000000000C6BD700010000000F0F4700077C
+:1019B000000000080F8000080000000C29800000D3
+:1019C00000000010001F00000000000C6BD7000199
+:1019D000000000188000FEA6000000003351000047
+:1019E000000000002A00000000000010B1C600291D
+:1019F0000000000F0F500007000000000A60000008
+:101A0000000000000AE100000000000F4B62000827
+:101A1000000000090B1600FF0000000F4C620010D0
+:101A2000000000000D620000000000090D1A00FF18
+:101A300000000010075000030000000C0D1A000801
+:101A40000000000C0B160008000000000CC600008F
+:101A5000000000000B80000000000000069800005D
+:101A600000000010205600000000000C2BD70001E1
+:101A7000000000080F8000030000001006C20004F0
+:101A80000000000C290000020000001026420002A5
+:101A90000000000C29520003000000082200000191
+:101AA00000000010001F00000000000C6BD70001B8
+:101AB00000000000231B00000000000027111A0096
+:101AC00000000000669000000000000C2952000099
+:101AD00000000010B197320C0000000C29800000BB
+:101AE00000000000069800000000001020530000D5
+:101AF0000000000C295200030000000022C58C00E9
+:101B000000000010001F00000000000C6BD7000157
+:101B100000000010205600000000000C2BD7000130
+:101B2000000000080F800003000000188000FFEF95
+:101B300000000010B1C8001300000010B1C600037F
+:101B40000000000C2980000000000010205300005D
+:101B50000000000C295200000000000C2952000374
+:101B60000000001006C200020000000C2952000212
+:101B70000000000022C58C00000000002765000066
+:101B80000000000026E4000000000008220000160B
+:101B900000000010B1C60003000000002348000050
+:101BA00000000010B1800005000000002348000084
+:101BB0000000000C298000000000000F0F500007FB
+:101BC000000000188000001200000008220000162B
+:101BD0000000000C2980000000000000301400000C
+:101BE00000000000309500000000001007500003C6
+:101BF000000000090B1600FF000000090D1A00FF8D
+:101C00000000000F311600080000000031623400AF
+:101C100000000003F162300000000010205F0000AF
+:101C2000000000002C510000000000092CD1007FB2
+:101C3000000000082CD90000000000082D00000062
+:101C4000000000082D80000C0000000000000000D3
+:101C50000000001091DE00000000001005C2000529
+:101C6000000000080F8000070000000033000000A3
+:101C700000000010001F00000000000C6BD70001E6
+:101C8000000000188000FE50000000002A00000044
+:101C90000000000F0F50000700000010B1C6003018
+:101CA0000000000F4742000800000009070E000F67
+:101CB00000000008070E000800000010001F0000D0
+:101CC0000000000C6BD700010000000809000001B3
+:101CD0000000000709121C0000000003CBCA92009C
+:101CE000000000000B97A2000000000742171C0034
+:101CF000000000000B0400000000000F0A84000335
+:101D0000000000000A959C00000000004A009A00B4
+:101D10000000000882120001000000010C170800FA
+:101D2000000000000C978C0000000000021800006A
+:101D3000000000080D00FFFF000000080F800006F3
+:101D40000000000C290000000000001006C2000482
+:101D50000000000C29520002000000102642000280
+:101D60000000000C295200030000000822000001BE
+:101D700000000010001F00000000000C6BD70001E5
+:101D800000000010B197320D00000000231B00007E
+:101D9000000000002711080000000000669000000D
+:101DA0000000000C29800000000000000218000064
+:101DB00000000010205300000000000C2952000316
+:101DC0000000000022C5360000000010001F0000C7
+:101DD0000000000C6BD70001000000080F80000617
+:101DE000000000188000FFF200000000231B00002C
+:101DF00000000000271108000000000066900000AD
+:101E000000000010B1C8000B0000000C2980000089
+:101E100000000010205300000000000C29520000B8
+:101E20000000000C295200030000001006C200024E
+:101E30000000000C295200020000000022C58C00A6
+:101E400000000000276500000000000026E40000FC
+:101E500000000000234800000000000822000017D6
+:101E60000000000C2980000000000010001F00008E
+:101E70000000000C6BD70001000000188000FE116C
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex
deleted file mode 100644
index 533dbeaebd30..000000000000
--- a/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex
+++ /dev/null
@@ -1,498 +0,0 @@
-:100000000000000000000E78000000580000000909
-:1000100000000000000000000000000000000000E0
-:1000200000000000000000000000000000000000D0
-:1000300000000FA800000ED0000000050000000026
-:1000400000000000000000000000000000000000B0
-:080050000000000000000000A8
-:0800580000000010B180000659
-:100060000000001F03030300000000080500FFFF5D
-:10007000000000180002000000000008050000FF5A
-:10008000000000180002000000000008AC000001A1
-:1000900000000000050000000000000C2F8000019F
-:1000A000000000002B000000000000002B8000007A
-:1000B0000000001091E0000200000008AC00000108
-:1000C00000000010203F006B00000010213F0003E3
-:1000D0000000001020BF003A000000188000FFFD63
-:1000E00000000010B1B8B0150000000B2FDF0002B7
-:1000F0000000000003D80000000000002C380000C1
-:10010000000000082C800000000000082D00000006
-:100110000000001091D400000000000806005555B2
-:10012000000000188000008F000000082D80011CD6
-:1001300000000008020000010000001091DE000035
-:100140000000000F42E0001C0000001091840A161D
-:1001500000000018800000960000000C29800002BA
-:100160000000000C1F800002000000002ADF0000D9
-:10017000000000082A00000F000000000500000039
-:10018000000000188000FFE60000000802000001E7
-:100190000000000F42E0001C0000001091840A18CB
-:1001A000000000082C800006000000082D0000065A
-:1001B0000000001091D40000000000082D8001060E
-:1001C0000000001880000085000000188000FFF18A
-:1001D00000000008B1000001000000082C80010CA4
-:1001E000000000082D000008000000082D8000011C
-:1001F000000000188000007F0000000B2FDF0002CD
-:100200000000000C1F800002000000002C0700000E
-:100210000000001091DE00000000000805005555A8
-:10022000000000188000FFD20000000B2FDF00024A
-:100230000000000C1F800000000000002C070000E0
-:100240000000001091DE0000000000080500555578
-:10025000000000188000FFCC0000000C1F8000028E
-:100260000000000805005555000000188000FFC977
-:100270000000000C298000020000000C1F8000021A
-:10028000000000002ADF0000000000082A0000052E
-:100290000000000805005555000000188000FFC34D
-:1002A000000000080224004A0000001800040000BA
-:1002B000000000188000001C000000188000001ED4
-:1002C000000000188000007800000018800000CABC
-:1002D00000000018800000C9000000188000000025
-:1002E00000000018800000000000001880000000DE
-:1002F00000000018800000000000001880000000CE
-:1003000000000018800000000000001880000000BD
-:100310000000001880000000000000188000011597
-:10032000000000188000000000000018800000009D
-:100330000000001880000015000000188000001B5D
-:10034000000000188000000000000018800000E09D
-:10035000000000188000002F000000188000011528
-:100360000000001880000140000000188000010B10
-:100370000000001880000164000000188000006187
-:100380000000001880000000000000188000009DA0
-:100390000000000C1F8000010000000005000000AC
-:1003A000000000188000FFA20000001091D400009F
-:1003B0000000000C298000010000000C1F800001DB
-:1003C000000000082A0000020000000005000000F4
-:1003D000000000188000FF9C0000001091D4000075
-:1003E0000000000C298000010000000C1F800001AB
-:1003F0000000000029420000000000082A0000025E
-:100400000000000005000000000000188000FF95BB
-:10041000000000188000FF9400000010B1BCB00A7A
-:100420000000000B2FDF00020000000003D80000D6
-:10043000000000002C3C00000000001091D40000DF
-:100440000000000806005555000000188000002A32
-:1004500000000018800000D9000000102C6201BAD2
-:100460000000001880000006000000082C80010D2C
-:10047000000000082D0000090000001091D40000C9
-:10048000000000082D8001070000001880000037E0
-:100490000000000C298000000000000C1F800000FC
-:1004A0000000001091DE0000000000002ADF0000C4
-:1004B000000000082A00000600000008050055554D
-:1004C000000000188000FF7E0000001091D40000A2
-:1004D0000000000C298000010000000C1F800001BA
-:1004E000000000082A00000B0000000005000000CA
-:1004F000000000188000FF780000000002020000E9
-:1005000000000000029A000000000000060C2C0011
-:1005100000000004C60C340000000010001F0000A2
-:1005200000000010B196180C0000000806960004A8
-:1005300000000009068DFFFC00000004CD051A0034
-:1005400000000004CC9A18000000001020D7000022
-:100550000000000C2B56000000000000000000000E
-:1005600000000000000000000000001020D7000084
-:10057000000000080F80000100000010B18001F4AD
-:1005800000000010001F00000000000C6B5600006F
-:1005900000000018000400000000000006820000B7
-:1005A00000000010B18A000800000010B18C140790
-:1005B0000000000B050AFFFF00000010B18A0003D5
-:1005C00000000000860A180000000010918C000056
-:1005D000000000082A0000010000001091D4000073
-:1005E00000000018000D00000000000005020000DF
-:1005F0000000001091DE000000000018000A00005A
-:1006000000000000068200000000001091DE0000E3
-:1006100000000010BEE10005000000188000FF4C43
-:10062000000000010561140000000010918A000222
-:1006300000000008B0E1000100000018000D0000FB
-:1006400000000000068200000000001091DE0000A3
-:1006500000000010BEE20005000000188000FF440A
-:10066000000000010562140000000010918A0002E1
-:1006700000000008B162000100000018000D000039
-:1006800000000010B1A0B0130000000B2FDF00022B
-:10069000000000002C200000000000082C8000005A
-:1006A000000000082D0000000000001091D40000A0
-:1006B0000000000806005555000000188000FFDC0F
-:1006C000000000082D80011C00000010001F000029
-:1006D000000000188000FFE60000000F47600008DF
-:1006E0000000000F060E0001000000000F5800007F
-:1006F000000000000A640000000000000AE500009D
-:10070000000000090B66FFFF000000000D61000003
-:1007100000000018800000130000000F4760000870
-:100720000000000B2FDF0002000000082C800000FA
-:10073000000000082D0000000000001091D400000F
-:10074000000000082D80011C0000000F060E0001B3
-:1007500000000010001F0000000000000F58000003
-:10076000000000188000FFD4000000000A640000B0
-:10077000000000000AE50000000000090B66FFFF12
-:10078000000000000D610000000000000262000097
-:100790000000000B2FDF0002000000003104000009
-:1007A00000000000309A0000000000090560000F02
-:1007B00000000010B18A000A0000000005634C0030
-:1007C00000000008050A001200000010B9621403BE
-:1007D0000000000003000000000000188000000579
-:1007E000000000188000FF1100000010B60614037E
-:1007F0000000000803060001000000188000FF1739
-:10080000000000188000FF9F0000000C29800001FC
-:100810000000000C295200010000000C29520000C9
-:10082000000000080200000E000000080280001A0C
-:1008300000000010B1C40A0200000008020000031A
-:1008400000000008220000010000000C1F800001D1
-:10085000000000002ADF0000000000002A0008005D
-:100860000000000805005555000000188000FF0931
-:100870000000000B2FDF00020000001091D40000E8
-:10088000000000082A000001000000002C200000E9
-:100890000000001091D40000000000082C8000002F
-:1008A000000000082D000000000000082D80011C41
-:1008B000000000188000FFA7000000082C80000640
-:1008C000000000082D00000600000000308000003D
-:1008D0000000000031000000000000082D8000062C
-:1008E0000000000C298000010000000C1F800001A6
-:1008F0000000001091DE0000000000002ADF000070
-:10090000000000082A0000100000000005000000A0
-:10091000000000188000FEF40000001091A0B00953
-:10092000000000082C80010D000000082D000009C7
-:100930000000001091D40000000000082D80010785
-:10094000000000188000FFA00000001880000010C8
-:1009500000000008AC000001000000188000000B3F
-:10096000000000000380B0000000000B2FDF000239
-:10097000000000002C0040000000001091D4000096
-:100980000000000806005555000000188000FF8296
-:1009900000000018800000310000001880000006F0
-:1009A0000000000B2FDF0002000000002C000E00F2
-:1009B000000000082A000007000000080500555547
-:1009C000000000188000FEDE00000000068200002B
-:1009D0000000000C298000010000000C1F800001B5
-:1009E000000000100CE70007000000090562FFFF8F
-:1009F00000000010BA6C1405000000002ADF00009F
-:100A00000000000021000000000000082A0000058E
-:100A10000000001091D40000000000082C80010CA0
-:100A2000000000082D0000080000000C31620018D2
-:100A3000000000082D800001000000188000FF76F3
-:100A400000000018000D000000000010B1A0B00E62
-:100A50000000000B2FDF00020000000003D80000A0
-:100A6000000000002C2000000000001091D40000C5
-:100A70000000001880000015000000102C62000229
-:100A8000000000188000000C0000000B2FDF0002A7
-:100A9000000000002C0700000000000C1F80000177
-:100AA0000000001091DE0000000000080500FFFFBC
-:100AB000000000188000FEC0000000082C80010D1E
-:100AC000000000082D0000090000001091D4000073
-:100AD000000000082D800107000000188000FF6D55
-:100AE0000000000C298000010000000C1F800001A4
-:100AF0000000001091DE0000000000002ADF00006E
-:100B0000000000082A00000A0000000005000000A4
-:100B1000000000188000FEB4000000000682000003
-:100B2000000000082C80010C000000082D000008C7
-:100B3000000000082D8001340000000000000000CB
-:100B400000000010205F0000000000082C80014021
-:100B5000000000082D00003C000000082D80011C52
-:100B600000000000000000000000001091DE000006
-:100B7000000000082C800080000000082D0000000C
-:100B8000000000082D80010500000010BEE20005F5
-:100B9000000000188000FE9D0000000105621400A6
-:100BA00000000010918A000200000008B1620001FC
-:100BB0000000001091DE000000000018000D000091
-:100BC0000000001091D40000000000080600AAAA4E
-:100BD000000000188000FF390000000C298000018F
-:100BE0000000000C1F800001000000082A0000091E
-:100BF000000000080500AAAA000000188000FE9767
-:100C00000000001091D400000000000806005555B7
-:100C1000000000188000FF310000001091A03C028D
-:100C200000000010B1E662070000000B2FDF000299
-:100C3000000000002C310000000000092CB1007FF2
-:100C4000000000082CD90000000000082D00000062
-:100C5000000000082D80010D00000010B1A8000662
-:100C600000000010205F0000000000002C200000A9
-:100C7000000000002CA70000000000082D0000105C
-:100C8000000000082D800108000000188000FF2CE3
-:100C900000000010B1A6001000000010001F0000AE
-:100CA0000000000F0F300007000000000A60000085
-:100CB000000000000AE100000000000F4B62000885
-:100CC000000000090B1600FF000000000D6200008C
-:100CD000000000090D1A00FF00000010073000039B
-:100CE0000000000C0D1A00080000000C0B16000894
-:100CF0000000000F4CE30018000000000C992C00CD
-:100D000000000004CC993400000000080F800000AF
-:100D10000000000C298000010000000033310000B9
-:100D20000000000822000016000000002ADF00007A
-:100D3000000000082A00000C00000010009F0000C6
-:100D4000000000000F2000000000000C1F800001C8
-:100D50000000000805005555000000188000FE6BDB
-:100D60000000001091D40000000000080600AAAAAC
-:100D7000000000188000FF050000000F4722000857
-:100D800000000009070E000F00000008070E000811
-:100D900000000008028000010000000702851C001E
-:100DA00000000008828500010000000002854C0060
-:100DB0000000000742851C0000000003C3AA520087
-:100DC0000000000003B10E00000000074B071C00EC
-:100DD0000000000F0F3000070000000F0A9600030C
-:100DE000000000000A955C00000000004A005A0064
-:100DF000000000000C960A00000000090C99FFFF9B
-:100E0000000000080D00FFFF00000010B196320244
-:100E1000000000080F80000500000010B1A80008C5
-:100E200000000010205F00000000000B2FDF000218
-:100E3000000000002C200000000000002CA7000093
-:100E4000000000082D000010000000082D8001089F
-:100E5000000000188000FEF30000000C2980000153
-:100E600000000010001F00000000000C1F800001A7
-:100E7000000000002ADF0000000000082A00000D2A
-:100E8000000000080500AAAA000000188000FE4526
-:100E90000000001091D40000000000080600555525
-:100EA000000000188000FEDF0000000C2980000117
-:100EB0000000000C1F800001000000082A0000074D
-:100EC0000000000805005555000000188000FE3D98
-:100ED00000000010B18000040000001F03030300A5
-:100EE00000000008050000FF0000001800020000DC
-:100EF000000000002A00000000000010B1D4000033
-:100F00000000001091DE00000000001020530000DF
-:100F100000000010001F00000000000C6BD7000153
-:100F2000000000002F80AA000000000C29800001B2
-:100F3000000000080254000F000000002C400000D8
-:100F4000000000092952003F0000001800040000C2
-:100F50000000001880000010000000188000001140
-:100F6000000000188000004A0000001880000128DE
-:100F700000000018800001270000001880000126F2
-:100F8000000000188000012600000018800000000A
-:100F9000000000188000013F0000001880000122BE
-:100FA000000000188000000B0000001880000145C0
-:100FB000000000188000019A000000188000007BEB
-:100FC00000000018800000F90000001880000109EE
-:100FD000000000002A000000000000188000FFE46C
-:100FE000000000002A0000000000000C2980000022
-:100FF000000000188000FFE1000000002A0000004F
-:10100000000000188000FFDF0000000003820000E5
-:10101000000000188000FFDA000000010C16140028
-:10102000000000008C1814000000001091980003CC
-:10103000000000080C96000200000010B1800003C0
-:10104000000000080C960001000000000C000000E9
-:10105000000000000D1900000000001020560000E4
-:101060000000000C2BD70001000000080F800001D9
-:10107000000000000000000000000010001F000041
-:101080000000000C6BD7000100000010011301F1FB
-:10109000000000180007000000000000050200002A
-:1010A000000000109196342100000010205F000025
-:1010B000000000002C1E0000000000082C8000062C
-:1010C000000000082D000006000000082D8001022D
-:1010D00000000000000000000000001091DE000091
-:1010E000000000000D61000000000018000A000070
-:1010F0000000000005020000000000109196341668
-:1011000000000010205F00000000000009D800006F
-:10111000000000002C1E0000000000082C80010EC2
-:10112000000000082D00000A000000082D800102C8
-:1011300000000000000000000000001091DE000030
-:10114000000000000D620000000000002C130000F1
-:1011500000000018000A0000000000000502000066
-:10116000000000109196340900000010205F00007C
-:10117000000000002C1E0000000000082C8000066B
-:10118000000000082D00006A000000082D80010208
-:1011900000000000000000000000001091DE0000D0
-:1011A000000000000D7A000000000018000A000096
-:1011B000000000002A000000000000000D61000097
-:1011C000000000000362000000000010234200DB6A
-:1011D0000000000002638C000000000026460000B2
-:1011E000000000080204001200000010B906082EDA
-:1011F000000000000F580000000000000A6400001A
-:10120000000000000AE50000000000090B66FFFF77
-:10121000000000000C000000000000000B80000037
-:10122000000000080CC60012000000188000FFCE6D
-:1012300000000010205600000000000C2BD7000119
-:10124000000000080F800003000000000000000004
-:1012500000000010001F00000000000C6BD7000110
-:101260000000000827110012000000006690000036
-:1012700000000008A31B001200000010B198000637
-:1012800000000010001F00000000000C6BD70001E0
-:1012900000000010205600000000000C2BD70001B9
-:1012A000000000080F800004000000082200000376
-:1012B000000000082C80000C000000082D00000C2D
-:1012C00000000010001F00000000000C6BD70001A0
-:1012D00000000000259600000000000C298000009E
-:1012E0000000000006660000000000008661180093
-:1012F000000000090260000F0000000F020400025D
-:1013000000000010B60C08050000000C1FBF000014
-:10131000000000102866000300000008078F00018D
-:101320000000000C336600100000000032140000C2
-:1013300000000000329500000000000573662C00DC
-:101340000000000031E32E00000000082D80001096
-:10135000000000188000FF7500000000230000005E
-:101360000000000925E6FFFF000000082200000B36
-:101370000000000C695200000000000C29800000F1
-:101380000000001028660088000000188000FF6E32
-:10139000000000002A000000000000082C8000402F
-:1013A000000000082D000020000000082D80011C16
-:1013B00000000000000000000000001091DE0000AE
-:1013C0000000000F42EA001000000010004F00046F
-:1013D00000000010B7469200000000080249001209
-:1013E00000000010B5840A00000000000D6100003C
-:1013F00000000010BA66346A00000008830500127D
-:1014000000000010004F000200000000034900002F
-:101410000000000183068C000000000083C60C0061
-:1014200000000010B1870011000000000B6E0000EA
-:1014300000000010BEE90005000000188000FF5504
-:10144000000000010569140000000010918A0002EC
-:1014500000000008B4E9000100000010B1E92C5DB3
-:101460000000000086692C0000000000020000005F
-:101470000000000902EAFFFF00000010000C00025B
-:101480000000000002040A000000000F460C0001EA
-:101490000000000F0285000100000010918C01FC8B
-:1014A00000000010B7040E54000000000F400000C0
-:1014B000000000000D610000000000000A64000050
-:1014C000000000000AE50000000000090B66FFFFB5
-:1014D000000000000C000000000000000B80000075
-:1014E000000000080C8600120000001020560000CA
-:1014F0000000000C2BD70001000000080F80000343
-:101500000000000C2952000000000010001F000025
-:101510000000000C6BD7000100000008271100122A
-:101520000000000066900000000000002646000059
-:10153000000000002306000000000010B198000920
-:1015400000000010001F00000000000C6BD700011D
-:1015500000000010205600000000000C2BD70001F6
-:10156000000000080F8000040000000000000000E0
-:1015700000000010001F00000000000C6BD70001ED
-:10158000000000003214000000000000329500004E
-:101590000000000031E32E000000000573662C00FF
-:1015A000000000002596000000000010B187002117
-:1015B0000000000C298000000000000F0F6B0007E6
-:1015C000000000000D690000000000000A6C00002F
-:1015D000000000000AED0000000000000B6E00009B
-:1015E000000000000B800000000000000C870000DD
-:1015F000000000188000FF1E000000010C161400FF
-:10160000000000008C181400000000080C96000177
-:101610000000001091980002000000080C990001E1
-:10162000000000000D190000000000000C00000088
-:1016300000000010205600000000000C2BD7000115
-:10164000000000080F80000100000010205300007F
-:101650000000000C6952000100000010001F000093
-:101660000000000C6BD700010000000022C58C00B8
-:1016700000000000231200000000000027110000FD
-:10168000000000002690000000000010B8170E03B4
-:101690000000000C29800000000000188000FFEB13
-:1016A0000000000082970E0000000000A3120A0054
-:1016B000000000082200001A000000082C80000C26
-:1016C000000000082D00000C000000082D80001014
-:1016D00000000010001F00000000000C6BD700018C
-:1016E000000000000D6E000000000003E7CF340092
-:1016F0000000000C298000000000001091DE0000B6
-:1017000000000010B1870007000000003614000040
-:1017100000000000369500000000000037160000B1
-:10172000000000082C800050000000082D00003050
-:10173000000000082D80000C000000188000FEF85A
-:10174000000000002646000000000000230000000A
-:101750000000000925E6FFFF000000000B6E0000FE
-:1017600000000003E7CF2C00000000082200001B4F
-:101770000000000C695200000000000C29800000ED
-:10178000000000188000FEEF000000002A000000AA
-:10179000000000100866000500000000066600005A
-:1017A000000000008661180000000009026000F0DF
-:1017B00000000010B60C0802000000188000FEE8CF
-:1017C000000000000682000000000010B18F000041
-:1017D00000000008878F00010000000C73660010F5
-:1017E000000000082C800018000000082D000018E0
-:1017F000000000082D8000020000000C5FBF000008
-:101800000000001091DE000000000018000D000034
-:10181000000000002A00000000000010286601F50A
-:10182000000000082C800003000000082D000003C9
-:10183000000000093060FFF0000000082D8000016A
-:101840000000000C298000000000001091DE000064
-:10185000000000082C80001A000000082D00001A6B
-:101860000000000573660000000000082D800002E3
-:1018700000000000318000000000001091DE000038
-:10188000000000082C80000C000000082D00000C57
-:10189000000000082D800004000000188000FECC2D
-:1018A0000000001800020000000000188000FECABE
-:1018B000000000002A00000000000010001F0000CF
-:1018C0000000000C6BD70001000000000F0080003A
-:1018D000000000080F800007000000188000001BB7
-:1018E00000000000280A00000000000005020000BF
-:1018F000000000082200000900000000290000008C
-:101900000000000F6568001000000003F66C9400F2
-:1019100000000010B972A0040000000C73E7001969
-:101920000000000C21420004000000003CF8000010
-:101930000000000C2980000000000010205300006F
-:1019400000000008220000080000000C61420004B2
-:1019500000000018000A000000000000050200005E
-:101960000000000C61420000000000100142000372
-:101970000000000C33E7001D0000000C6142000273
-:1019800000000018000A0000000000002A0000000B
-:1019900000000010001F00000000000C6BD70001C9
-:1019A0000000000F0F470007000000080F8000082C
-:1019B0000000000C2980000000000010001F000043
-:1019C0000000000C6BD70001000000188000FEA68C
-:1019D0000000000033510000000000002A00000059
-:1019E00000000010B1C600290000000F0F500007D2
-:1019F000000000000A600000000000000AE1000092
-:101A00000000000F4B620008000000090B1600FFE9
-:101A10000000000F4C620010000000000D6200008A
-:101A2000000000090D1A00FF00000010075000031D
-:101A30000000000C0D1A00080000000C0B16000836
-:101A4000000000000CC60000000000000B80000039
-:101A50000000000006980000000000102056000062
-:101A60000000000C2BD70001000000080F800003CD
-:101A70000000001006C200040000000C2900000253
-:101A800000000010264200020000000C2952000352
-:101A9000000000082200000100000010001F0000EC
-:101AA0000000000C6BD7000100000000231B0000A9
-:101AB0000000000027111A000000000066900000DE
-:101AC0000000000C2952000000000010B197320CF9
-:101AD0000000000C298000000000000006980000B3
-:101AE00000000010205300000000000C29520003E9
-:101AF0000000000022C58C0000000010001F000044
-:101B00000000000C6BD70001000000102056000000
-:101B10000000000C2BD70001000000080F8000031C
-:101B2000000000188000FFEF00000010B1C8001393
-:101B300000000010B1C600030000000C2980000066
-:101B400000000010205300000000000C295200008B
-:101B50000000000C295200030000001006C2000221
-:101B60000000000C295200020000000022C58C0079
-:101B700000000000276500000000000026E40000CF
-:101B8000000000082200001600000010B1C600038B
-:101B9000000000002348000000000010B180000594
-:101BA00000000000234800000000000C2980000015
-:101BB0000000000F0F500007000000188000001206
-:101BC00000000008220000160000000C2980000020
-:101BD00000000000301400000000000030950000FC
-:101BE0000000001007500003000000090B1600FF62
-:101BF000000000090D1A00FF0000000F3116000858
-:101C0000000000003162340000000003F162300087
-:101C100000000010205F0000000000002C510000B8
-:101C2000000000092CD1007F000000082CD9000022
-:101C3000000000082D000000000000082D80000CAE
-:101C400000000000000000000000001091DE000015
-:101C50000000001005C20005000000080F8000070A
-:101C6000000000003300000000000010001F000012
-:101C70000000000C6BD70001000000188000FE502F
-:101C8000000000002A0000000000000F0F500007B5
-:101C900000000010B1C600300000000F47420008ED
-:101CA00000000009070E000F00000008070E0008E2
-:101CB00000000010001F00000000000C6BD70001A6
-:101CC00000000008090000010000000709121C00C4
-:101CD00000000003CBCA9200000000000B97A20096
-:101CE0000000000742171C00000000000B04000069
-:101CF0000000000F0A840003000000000A959C0009
-:101D0000000000004A009A00000000088212000152
-:101D1000000000010C170800000000000C978C0068
-:101D20000000000002180000000000080D00FFFF86
-:101D3000000000080F8000060000000C29000000D1
-:101D40000000001006C200040000000C295200022E
-:101D500000000010264200020000000C295200037F
-:101D6000000000082200000100000010001F000019
-:101D70000000000C6BD7000100000010B197320D7D
-:101D800000000000231B00000000000027110800D5
-:101D900000000000669000000000000C2980000098
-:101DA0000000000002180000000000102053000096
-:101DB0000000000C295200030000000022C536007C
-:101DC00000000010001F00000000000C6BD7000195
-:101DD000000000080F800006000000188000FFF2DD
-:101DE00000000000231B0000000000002711080075
-:101DF000000000006690000000000010B1C8000B59
-:101E00000000000C2980000000000010205300009A
-:101E10000000000C295200000000000C29520003B1
-:101E20000000001006C200020000000C295200024F
-:101E30000000000022C58C000000000027650000A3
-:101E40000000000026E4000000000000234800001D
-:101E500000000008220000170000000C298000008C
-:101E600000000010001F00000000000C6BD70001F4
-:081E7000000000188000FE11C3
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
-- 
cgit v1.2.3


From 6909c66dfbbab99dbbd9931627c9f6e8c45bfbdb Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:20 +0000
Subject: drivers/net/ixgb: Use netif_printk macros

Convert private DPRINTK macro uses to netif_<level> equivalents
Remove #define DPRINTK

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgb/ixgb.h      | 11 ++----
 drivers/net/ixgb/ixgb_main.c | 89 ++++++++++++++++++++++++--------------------
 2 files changed, 51 insertions(+), 49 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 5257ae08b9f9..92d2e71d0c8b 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -75,19 +75,14 @@ struct ixgb_adapter;
 #include "ixgb_ee.h"
 #include "ixgb_ids.h"
 
+#define PFX "ixgb: "
+
 #ifdef _DEBUG_DRIVER_
-#define IXGB_DBG(args...) printk(KERN_DEBUG "ixgb: " args)
+#define IXGB_DBG(args...) printk(KERN_DEBUG PFX args)
 #else
 #define IXGB_DBG(args...)
 #endif
 
-#define PFX "ixgb: "
-#define DPRINTK(nlevel, klevel, fmt, args...) \
-	(void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
-	printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
-		__func__ , ## args))
-
-
 /* TX/RX descriptor defines */
 #define DEFAULT_TXD      256
 #define MAX_TXD         4096
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 6a7b2ccef72c..93d018505ebb 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -238,8 +238,8 @@ ixgb_up(struct ixgb_adapter *adapter)
 	if (err) {
 		if (adapter->have_msi)
 			pci_disable_msi(adapter->pdev);
-		DPRINTK(PROBE, ERR,
-		 "Unable to allocate interrupt Error: %d\n", err);
+		netif_err(adapter, probe, adapter->netdev,
+			  "Unable to allocate interrupt Error: %d\n", err);
 		return err;
 	}
 
@@ -310,7 +310,7 @@ ixgb_reset(struct ixgb_adapter *adapter)
 
 	ixgb_adapter_stop(hw);
 	if (!ixgb_init_hw(hw))
-		DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n");
+		netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n");
 
 	/* restore frame size information */
 	IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
@@ -447,7 +447,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* make sure the EEPROM is good */
 
 	if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
-		DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "The EEPROM Checksum Is Not Valid\n");
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -456,7 +457,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+		netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n");
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -477,7 +478,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
 
-	DPRINTK(PROBE, INFO, "Intel(R) PRO/10GbE Network Connection\n");
+	netif_info(adapter, probe, adapter->netdev,
+		   "Intel(R) PRO/10GbE Network Connection\n");
 	ixgb_check_options(adapter);
 	/* reset the hardware with the new settings */
 
@@ -552,14 +554,14 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
 	hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
 	adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */
 
-	if ((hw->device_id == IXGB_DEVICE_ID_82597EX)
-	   || (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4)
-	   || (hw->device_id == IXGB_DEVICE_ID_82597EX_LR)
-	   || (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
+	if ((hw->device_id == IXGB_DEVICE_ID_82597EX) ||
+	    (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) ||
+	    (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) ||
+	    (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
 		hw->mac_type = ixgb_82597;
 	else {
 		/* should never have loaded on this device */
-		DPRINTK(PROBE, ERR, "unsupported device id\n");
+		netif_err(adapter, probe, adapter->netdev, "unsupported device id\n");
 	}
 
 	/* enable flow control to be programmed */
@@ -661,8 +663,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
 	size = sizeof(struct ixgb_buffer) * txdr->count;
 	txdr->buffer_info = vmalloc(size);
 	if (!txdr->buffer_info) {
-		DPRINTK(PROBE, ERR,
-		 "Unable to allocate transmit descriptor ring memory\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "Unable to allocate transmit descriptor ring memory\n");
 		return -ENOMEM;
 	}
 	memset(txdr->buffer_info, 0, size);
@@ -675,8 +677,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
 	txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
 	if (!txdr->desc) {
 		vfree(txdr->buffer_info);
-		DPRINTK(PROBE, ERR,
-		 "Unable to allocate transmit descriptor memory\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "Unable to allocate transmit descriptor memory\n");
 		return -ENOMEM;
 	}
 	memset(txdr->desc, 0, txdr->size);
@@ -750,8 +752,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
 	size = sizeof(struct ixgb_buffer) * rxdr->count;
 	rxdr->buffer_info = vmalloc(size);
 	if (!rxdr->buffer_info) {
-		DPRINTK(PROBE, ERR,
-		 "Unable to allocate receive descriptor ring\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "Unable to allocate receive descriptor ring\n");
 		return -ENOMEM;
 	}
 	memset(rxdr->buffer_info, 0, size);
@@ -765,8 +767,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
 
 	if (!rxdr->desc) {
 		vfree(rxdr->buffer_info);
-		DPRINTK(PROBE, ERR,
-		 "Unable to allocate receive descriptors\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "Unable to allocate receive descriptors\n");
 		return -ENOMEM;
 	}
 	memset(rxdr->desc, 0, rxdr->size);
@@ -1580,7 +1582,8 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu)
 	/* MTU < 68 is an error for IPv4 traffic, just don't allow it */
 	if ((new_mtu < 68) ||
 	    (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
-		DPRINTK(PROBE, ERR, "Invalid MTU setting %d\n", new_mtu);
+		netif_err(adapter, probe, adapter->netdev,
+			  "Invalid MTU setting %d\n", new_mtu);
 		return -EINVAL;
 	}
 
@@ -1854,24 +1857,25 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
 		   && !(IXGB_READ_REG(&adapter->hw, STATUS) &
 		        IXGB_STATUS_TXOFF)) {
 			/* detected Tx unit hang */
-			DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-					"  TDH                  <%x>\n"
-					"  TDT                  <%x>\n"
-					"  next_to_use          <%x>\n"
-					"  next_to_clean        <%x>\n"
-					"buffer_info[next_to_clean]\n"
-					"  time_stamp           <%lx>\n"
-					"  next_to_watch        <%x>\n"
-					"  jiffies              <%lx>\n"
-					"  next_to_watch.status <%x>\n",
-				IXGB_READ_REG(&adapter->hw, TDH),
-				IXGB_READ_REG(&adapter->hw, TDT),
-				tx_ring->next_to_use,
-				tx_ring->next_to_clean,
-				tx_ring->buffer_info[eop].time_stamp,
-				eop,
-				jiffies,
-				eop_desc->status);
+			netif_err(adapter, drv, adapter->netdev,
+				  "Detected Tx Unit Hang\n"
+				  "  TDH                  <%x>\n"
+				  "  TDT                  <%x>\n"
+				  "  next_to_use          <%x>\n"
+				  "  next_to_clean        <%x>\n"
+				  "buffer_info[next_to_clean]\n"
+				  "  time_stamp           <%lx>\n"
+				  "  next_to_watch        <%x>\n"
+				  "  jiffies              <%lx>\n"
+				  "  next_to_watch.status <%x>\n",
+				  IXGB_READ_REG(&adapter->hw, TDH),
+				  IXGB_READ_REG(&adapter->hw, TDT),
+				  tx_ring->next_to_use,
+				  tx_ring->next_to_clean,
+				  tx_ring->buffer_info[eop].time_stamp,
+				  eop,
+				  jiffies,
+				  eop_desc->status);
 			netif_stop_queue(netdev);
 		}
 	}
@@ -2269,7 +2273,8 @@ static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	if (pci_enable_device(pdev)) {
-		DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "Cannot re-enable PCI device after reset\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
@@ -2285,14 +2290,16 @@ static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
 
 	/* Make sure the EEPROM is good */
 	if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
-		DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "After reset, the EEPROM checksum is not valid\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
 	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n");
+		netif_err(adapter, probe, adapter->netdev,
+			  "After reset, invalid MAC address\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
-- 
cgit v1.2.3


From 6c35abaedc191e2c7c8fa40a2b4c2b01d553b768 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:21 +0000
Subject: drivers/net/sky2: Convert to use netif_printk macros

Some unlikely(netif_msg_<foo>(sky2)) tests are also
removed by this change.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 65 +++++++++++++++++++++++-------------------------------
 1 file changed, 27 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index dfff8e56a51e..a1198f141996 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1613,8 +1613,7 @@ static int sky2_up(struct net_device *dev)
 	sky2_write32(hw, B0_IMSK, imask);
 	sky2_read32(hw, B0_IMSK);
 
-	if (netif_msg_ifup(sky2))
-		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+	netif_info(sky2, ifup, dev, "enabling interface\n");
 
 	return 0;
 
@@ -1697,9 +1696,8 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
 		goto mapping_error;
 
 	slot = sky2->tx_prod;
-	if (unlikely(netif_msg_tx_queued(sky2)))
-		printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
-		       dev->name, slot, skb->len);
+	netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
+		     "tx queued, slot %u, len %d\n", slot, skb->len);
 
 	/* Send high bits if needed */
 	upper = upper_32_bits(mapping);
@@ -1864,9 +1862,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 		sky2_tx_unmap(sky2->hw->pdev, re);
 
 		if (skb) {
-			if (unlikely(netif_msg_tx_done(sky2)))
-				printk(KERN_DEBUG "%s: tx done %u\n",
-				       dev->name, idx);
+			netif_printk(sky2, tx_done, KERN_DEBUG, dev,
+				     "tx done %u\n", idx);
 
 			dev->stats.tx_packets++;
 			dev->stats.tx_bytes += skb->len;
@@ -1961,8 +1958,7 @@ static int sky2_down(struct net_device *dev)
 	if (!sky2->tx_le)
 		return 0;
 
-	if (netif_msg_ifdown(sky2))
-		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
+	netif_info(sky2, ifdown, dev, "disabling interface\n");
 
 	/* Disable port IRQ */
 	sky2_write32(hw, B0_IMSK,
@@ -2028,12 +2024,11 @@ static void sky2_link_up(struct sky2_port *sky2)
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
 
-	if (netif_msg_link(sky2))
-		printk(KERN_INFO PFX
-		       "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
-		       sky2->netdev->name, sky2->speed,
-		       sky2->duplex == DUPLEX_FULL ? "full" : "half",
-		       fc_name[sky2->flow_status]);
+	netif_info(sky2, link, sky2->netdev,
+		   "Link is up at %d Mbps, %s duplex, flow control %s\n",
+		   sky2->speed,
+		   sky2->duplex == DUPLEX_FULL ? "full" : "half",
+		   fc_name[sky2->flow_status]);
 }
 
 static void sky2_link_down(struct sky2_port *sky2)
@@ -2053,8 +2048,7 @@ static void sky2_link_down(struct sky2_port *sky2)
 	/* Turn off link LED */
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
 
-	if (netif_msg_link(sky2))
-		printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
+	netif_info(sky2, link, sky2->netdev, "Link is down\n");
 
 	sky2_phy_init(hw, port);
 }
@@ -2144,9 +2138,8 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
 	istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
 	phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
 
-	if (netif_msg_intr(sky2))
-		printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
-		       sky2->netdev->name, istatus, phystat);
+	netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
+		   istatus, phystat);
 
 	if (istatus & PHY_M_IS_AN_COMPL) {
 		if (sky2_autoneg_done(sky2, phystat) == 0)
@@ -2200,8 +2193,7 @@ static void sky2_tx_timeout(struct net_device *dev)
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 
-	if (netif_msg_timer(sky2))
-		printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
+	netif_err(sky2, timer, dev, "tx timeout\n");
 
 	printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
 	       dev->name, sky2->tx_cons, sky2->tx_prod,
@@ -2396,9 +2388,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 		count -= VLAN_HLEN;
 #endif
 
-	if (unlikely(netif_msg_rx_status(sky2)))
-		printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
-		       dev->name, sky2->rx_next, status, length);
+	netif_printk(sky2, rx_status, KERN_DEBUG, dev,
+		     "rx slot %u status 0x%x len %d\n",
+		     sky2->rx_next, status, length);
 
 	sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
 	prefetch(sky2->rx_ring + sky2->rx_next);
@@ -2439,9 +2431,10 @@ len_error:
 	/* Truncation of overlength packets
 	   causes PHY length to not match MAC length */
 	++dev->stats.rx_length_errors;
-	if (netif_msg_rx_err(sky2) && net_ratelimit())
-		pr_info(PFX "%s: rx length error: status %#x length %d\n",
-			dev->name, status, length);
+	if (net_ratelimit())
+		netif_info(sky2, rx_err, dev,
+			   "rx length error: status %#x length %d\n",
+			   status, length);
 	goto resubmit;
 
 error:
@@ -2451,9 +2444,9 @@ error:
 		goto resubmit;
 	}
 
-	if (netif_msg_rx_err(sky2) && net_ratelimit())
-		printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
-		       dev->name, status, length);
+	if (net_ratelimit())
+		netif_info(sky2, rx_err, dev,
+			   "rx error, status 0x%x length %d\n", status, length);
 
 	if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
 		dev->stats.rx_length_errors++;
@@ -2733,9 +2726,7 @@ static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
 	struct sky2_port *sky2 = netdev_priv(dev);
 	u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
 
-	if (netif_msg_intr(sky2))
-		printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
-		       dev->name, status);
+	netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
 
 	if (status & GM_IS_RX_CO_OV)
 		gma_read16(hw, port, GM_RX_IRQ_SRC);
@@ -4529,9 +4520,7 @@ static void __devinit sky2_show_addr(struct net_device *dev)
 {
 	const struct sky2_port *sky2 = netdev_priv(dev);
 
-	if (netif_msg_probe(sky2))
-		printk(KERN_INFO PFX "%s: addr %pM\n",
-		       dev->name, dev->dev_addr);
+	netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
 }
 
 /* Handle software interrupt used during MSI test */
-- 
cgit v1.2.3


From 865a21a5e3d1b384c559a44c898fcad93e187b82 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:22 +0000
Subject: drivers/net/tehuti.c: Use (pr|netdev|netif)_<levels> macro helpers

Make the output logging messages a bit more consistent.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tehuti.c | 88 ++++++++++++++++++++++++----------------------------
 drivers/net/tehuti.h | 30 +++++++++++-------
 2 files changed, 59 insertions(+), 59 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index ab9b0280317e..82e522a114d2 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -62,9 +62,11 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "tehuti.h"
 
-static DEFINE_PCI_DEVICE_TABLE(bdx_pci_tbl) = {
+static struct pci_device_id __devinitdata bdx_pci_tbl[] = {
 	{0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1FC9, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1FC9, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -105,26 +107,24 @@ static void print_hw_id(struct pci_dev *pdev)
 	pci_read_config_word(pdev, PCI_LINK_STATUS_REG, &pci_link_status);
 	pci_read_config_word(pdev, PCI_DEV_CTRL_REG, &pci_ctrl);
 
-	printk(KERN_INFO "tehuti: %s%s\n", BDX_NIC_NAME,
-	       nic->port_num == 1 ? "" : ", 2-Port");
-	printk(KERN_INFO
-	       "tehuti: srom 0x%x fpga %d build %u lane# %d"
-	       " max_pl 0x%x mrrs 0x%x\n",
-	       readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF,
-	       readl(nic->regs + FPGA_SEED),
-	       GET_LINK_STATUS_LANES(pci_link_status),
-	       GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl));
+	pr_info("%s%s\n", BDX_NIC_NAME,
+		nic->port_num == 1 ? "" : ", 2-Port");
+	pr_info("srom 0x%x fpga %d build %u lane# %d max_pl 0x%x mrrs 0x%x\n",
+		readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF,
+		readl(nic->regs + FPGA_SEED),
+		GET_LINK_STATUS_LANES(pci_link_status),
+		GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl));
 }
 
 static void print_fw_id(struct pci_nic *nic)
 {
-	printk(KERN_INFO "tehuti: fw 0x%x\n", readl(nic->regs + FW_VER));
+	pr_info("fw 0x%x\n", readl(nic->regs + FW_VER));
 }
 
 static void print_eth_id(struct net_device *ndev)
 {
-	printk(KERN_INFO "%s: %s, Port %c\n", ndev->name, BDX_NIC_NAME,
-	       (ndev->if_port == 0) ? 'A' : 'B');
+	netdev_info(ndev, "%s, Port %c\n",
+		    BDX_NIC_NAME, (ndev->if_port == 0) ? 'A' : 'B');
 
 }
 
@@ -160,7 +160,7 @@ bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type,
 	f->va = pci_alloc_consistent(priv->pdev,
 				     memsz + FIFO_EXTRA_SPACE, &f->da);
 	if (!f->va) {
-		ERR("pci_alloc_consistent failed\n");
+		pr_err("pci_alloc_consistent failed\n");
 		RET(-ENOMEM);
 	}
 	f->reg_CFG0 = reg_CFG0;
@@ -204,13 +204,13 @@ static void bdx_link_changed(struct bdx_priv *priv)
 		if (netif_carrier_ok(priv->ndev)) {
 			netif_stop_queue(priv->ndev);
 			netif_carrier_off(priv->ndev);
-			ERR("%s: Link Down\n", priv->ndev->name);
+			netdev_err(priv->ndev, "Link Down\n");
 		}
 	} else {
 		if (!netif_carrier_ok(priv->ndev)) {
 			netif_wake_queue(priv->ndev);
 			netif_carrier_on(priv->ndev);
-			ERR("%s: Link Up\n", priv->ndev->name);
+			netdev_err(priv->ndev, "Link Up\n");
 		}
 	}
 }
@@ -226,10 +226,10 @@ static void bdx_isr_extra(struct bdx_priv *priv, u32 isr)
 		bdx_link_changed(priv);
 
 	if (isr & IR_PCIE_LINK)
-		ERR("%s: PCI-E Link Fault\n", priv->ndev->name);
+		netdev_err(priv->ndev, "PCI-E Link Fault\n");
 
 	if (isr & IR_PCIE_TOUT)
-		ERR("%s: PCI-E Time Out\n", priv->ndev->name);
+		netdev_err(priv->ndev, "PCI-E Time Out\n");
 
 }
 
@@ -345,7 +345,7 @@ out:
 		release_firmware(fw);
 
 	if (rc) {
-		ERR("%s: firmware loading failed\n", priv->ndev->name);
+		netdev_err(priv->ndev, "firmware loading failed\n");
 		if (rc == -EIO)
 			DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
 			    READ_REG(priv, regVPC),
@@ -462,7 +462,7 @@ static int bdx_hw_reset_direct(void __iomem *regs)
 			readl(regs + regRXD_CFG0_0);
 			return 0;
 		}
-	ERR("tehuti: HW reset failed\n");
+	pr_err("HW reset failed\n");
 	return 1;		/* failure */
 }
 
@@ -486,7 +486,7 @@ static int bdx_hw_reset(struct bdx_priv *priv)
 			READ_REG(priv, regRXD_CFG0_0);
 			return 0;
 		}
-	ERR("tehuti: HW reset failed\n");
+	pr_err("HW reset failed\n");
 	return 1;		/* failure */
 }
 
@@ -510,8 +510,7 @@ static int bdx_sw_reset(struct bdx_priv *priv)
 		mdelay(10);
 	}
 	if (i == 50)
-		ERR("%s: SW reset timeout. continuing anyway\n",
-		    priv->ndev->name);
+		netdev_err(priv->ndev, "SW reset timeout. continuing anyway\n");
 
 	/* 6. disable intrs */
 	WRITE_REG(priv, regRDINTCM0, 0);
@@ -647,7 +646,7 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 	if (cmd != SIOCDEVPRIVATE) {
 		error = copy_from_user(data, ifr->ifr_data, sizeof(data));
 		if (error) {
-			ERR("cant copy from user\n");
+			pr_err("cant copy from user\n");
 			RET(error);
 		}
 		DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
@@ -708,7 +707,7 @@ static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable)
 	ENTER;
 	DBG2("vid=%d value=%d\n", (int)vid, enable);
 	if (unlikely(vid >= 4096)) {
-		ERR("tehuti: invalid VID: %u (> 4096)\n", vid);
+		pr_err("invalid VID: %u (> 4096)\n", vid);
 		RET();
 	}
 	reg = regVLAN_0 + (vid / 32) * 4;
@@ -776,8 +775,8 @@ static int bdx_change_mtu(struct net_device *ndev, int new_mtu)
 
 	/* enforce minimum frame size */
 	if (new_mtu < ETH_ZLEN) {
-		ERR("%s: %s mtu %d is less then minimal %d\n",
-		    BDX_DRV_NAME, ndev->name, new_mtu, ETH_ZLEN);
+		netdev_err(ndev, "mtu %d is less then minimal %d\n",
+			   new_mtu, ETH_ZLEN);
 		RET(-EINVAL);
 	}
 
@@ -1038,7 +1037,7 @@ static int bdx_rx_init(struct bdx_priv *priv)
 	return 0;
 
 err_mem:
-	ERR("%s: %s: Rx init failed\n", BDX_DRV_NAME, priv->ndev->name);
+	netdev_err(priv->ndev, "Rx init failed\n");
 	return -ENOMEM;
 }
 
@@ -1116,7 +1115,7 @@ static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
 	dno = bdx_rxdb_available(db) - 1;
 	while (dno > 0) {
 		if (!(skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN))) {
-			ERR("NO MEM: dev_alloc_skb failed\n");
+			pr_err("NO MEM: dev_alloc_skb failed\n");
 			break;
 		}
 		skb->dev = priv->ndev;
@@ -1337,9 +1336,7 @@ static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget)
 static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
 		       u16 rxd_vlan)
 {
-	DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d "
-	    "pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d "
-	    "va_lo %d va_hi %d\n",
+	DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d va_lo %d va_hi %d\n",
 	    GET_RXD_BC(rxd_val1), GET_RXD_RXFQ(rxd_val1), GET_RXD_TO(rxd_val1),
 	    GET_RXD_TYPE(rxd_val1), GET_RXD_ERR(rxd_val1),
 	    GET_RXD_RXP(rxd_val1), GET_RXD_PKT_ID(rxd_val1),
@@ -1591,7 +1588,7 @@ static int bdx_tx_init(struct bdx_priv *priv)
 	return 0;
 
 err_mem:
-	ERR("tehuti: %s: Tx init failed\n", priv->ndev->name);
+	netdev_err(priv->ndev, "Tx init failed\n");
 	return -ENOMEM;
 }
 
@@ -1946,8 +1943,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	} else {
 		if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
 		    (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
-			printk(KERN_ERR "tehuti: No usable DMA configuration"
-					", aborting\n");
+			pr_err("No usable DMA configuration, aborting\n");
 			goto err_dma;
 		}
 		pci_using_dac = 0;
@@ -1961,25 +1957,25 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pciaddr = pci_resource_start(pdev, 0);
 	if (!pciaddr) {
 		err = -EIO;
-		ERR("tehuti: no MMIO resource\n");
+		pr_err("no MMIO resource\n");
 		goto err_out_res;
 	}
 	if ((regionSize = pci_resource_len(pdev, 0)) < BDX_REGS_SIZE) {
 		err = -EIO;
-		ERR("tehuti: MMIO resource (%x) too small\n", regionSize);
+		pr_err("MMIO resource (%x) too small\n", regionSize);
 		goto err_out_res;
 	}
 
 	nic->regs = ioremap(pciaddr, regionSize);
 	if (!nic->regs) {
 		err = -EIO;
-		ERR("tehuti: ioremap failed\n");
+		pr_err("ioremap failed\n");
 		goto err_out_res;
 	}
 
 	if (pdev->irq < 2) {
 		err = -EIO;
-		ERR("tehuti: invalid irq (%d)\n", pdev->irq);
+		pr_err("invalid irq (%d)\n", pdev->irq);
 		goto err_out_iomap;
 	}
 	pci_set_drvdata(pdev, nic);
@@ -1997,7 +1993,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 #ifdef BDX_MSI
 	if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) {
 		if ((err = pci_enable_msi(pdev)))
-			ERR("Tehuti: Can't eneble msi. error is %d\n", err);
+			pr_err("Can't eneble msi. error is %d\n", err);
 		else
 			nic->irq_type = IRQ_MSI;
 	} else
@@ -2008,7 +2004,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (port = 0; port < nic->port_num; port++) {
 		if (!(ndev = alloc_etherdev(sizeof(struct bdx_priv)))) {
 			err = -ENOMEM;
-			printk(KERN_ERR "tehuti: alloc_etherdev failed\n");
+			pr_err("alloc_etherdev failed\n");
 			goto err_out_iomap;
 		}
 
@@ -2075,12 +2071,12 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		/*bdx_hw_reset(priv); */
 		if (bdx_read_mac(priv)) {
-			printk(KERN_ERR "tehuti: load MAC address failed\n");
+			pr_err("load MAC address failed\n");
 			goto err_out_iomap;
 		}
 		SET_NETDEV_DEV(ndev, &pdev->dev);
 		if ((err = register_netdev(ndev))) {
-			printk(KERN_ERR "tehuti: register_netdev failed\n");
+			pr_err("register_netdev failed\n");
 			goto err_out_free;
 		}
 		netif_carrier_off(ndev);
@@ -2493,10 +2489,8 @@ static struct pci_driver bdx_pci_driver = {
  */
 static void __init print_driver_id(void)
 {
-	printk(KERN_INFO "%s: %s, %s\n", BDX_DRV_NAME, BDX_DRV_DESC,
-	       BDX_DRV_VERSION);
-	printk(KERN_INFO "%s: Options: hw_csum %s\n", BDX_DRV_NAME,
-	       BDX_MSI_STRING);
+	pr_info("%s, %s\n", BDX_DRV_DESC, BDX_DRV_VERSION);
+	pr_info("Options: hw_csum %s\n", BDX_MSI_STRING);
 }
 
 static int __init bdx_module_init(void)
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index 124141909e42..a19dcf8b6b56 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -529,28 +529,34 @@ struct txd_desc {
 
 /* Debugging Macros */
 
-#define ERR(fmt, args...) printk(KERN_ERR fmt, ## args)
-#define DBG2(fmt, args...)	\
-	printk(KERN_ERR  "%s:%-5d: " fmt, __func__, __LINE__, ## args)
+#define DBG2(fmt, args...)					\
+	pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args)
 
 #define BDX_ASSERT(x) BUG_ON(x)
 
 #ifdef DEBUG
 
-#define ENTER          do { \
-	printk(KERN_ERR  "%s:%-5d: ENTER\n", __func__, __LINE__); \
+#define ENTER						\
+do {							\
+	pr_err("%s:%-5d: ENTER\n", __func__, __LINE__); \
 } while (0)
 
-#define RET(args...)   do { \
-	printk(KERN_ERR  "%s:%-5d: RETURN\n", __func__, __LINE__); \
-return args; } while (0)
+#define RET(args...)					 \
+do {							 \
+	pr_err("%s:%-5d: RETURN\n", __func__, __LINE__); \
+	return args;					 \
+} while (0)
 
-#define DBG(fmt, args...)	\
-	printk(KERN_ERR  "%s:%-5d: " fmt, __func__, __LINE__, ## args)
+#define DBG(fmt, args...)					\
+	pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args)
 #else
-#define ENTER         do {  } while (0)
+#define ENTER do {  } while (0)
 #define RET(args...)   return args
-#define DBG(fmt, args...)   do {  } while (0)
+#define DBG(fmt, args...)			\
+do {						\
+	if (0)					\
+		pr_err(fmt, ##args);		\
+} while (0)
 #endif
 
 #endif /* _BDX__H */
-- 
cgit v1.2.3


From cb001a1f7db6ffb0fff0796c60853c2bf2e512c3 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:23 +0000
Subject: drivers/net/tehuti.c: Hoist assigns out of ifs

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tehuti.c | 49 +++++++++++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 82e522a114d2..fdf87ea7bc4e 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -420,8 +420,10 @@ static int bdx_hw_start(struct bdx_priv *priv)
 		  GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB);
 
 #define BDX_IRQ_TYPE	((priv->nic->irq_type == IRQ_MSI)?0:IRQF_SHARED)
-	if ((rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE,
-			 ndev->name, ndev)))
+
+	rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE,
+			 ndev->name, ndev);
+	if (rc)
 		goto err_irq;
 	bdx_enable_interrupts(priv);
 
@@ -603,18 +605,15 @@ static int bdx_open(struct net_device *ndev)
 	if (netif_running(ndev))
 		netif_stop_queue(priv->ndev);
 
-	if ((rc = bdx_tx_init(priv)))
-		goto err;
-
-	if ((rc = bdx_rx_init(priv)))
-		goto err;
-
-	if ((rc = bdx_fw_load(priv)))
+	if ((rc = bdx_tx_init(priv)) ||
+	    (rc = bdx_rx_init(priv)) ||
+	    (rc = bdx_fw_load(priv)))
 		goto err;
 
 	bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
 
-	if ((rc = bdx_hw_start(priv)))
+	rc = bdx_hw_start(priv);
+	if (rc)
 		goto err;
 
 	napi_enable(&priv->napi);
@@ -1027,10 +1026,9 @@ static int bdx_rx_init(struct bdx_priv *priv)
 			  regRXF_CFG0_0, regRXF_CFG1_0,
 			  regRXF_RPTR_0, regRXF_WPTR_0))
 		goto err_mem;
-	if (!
-	    (priv->rxdb =
-	     bdx_rxdb_create(priv->rxf_fifo0.m.memsz /
-			     sizeof(struct rxf_desc))))
+	priv->rxdb = bdx_rxdb_create(priv->rxf_fifo0.m.memsz /
+				     sizeof(struct rxf_desc));
+	if (!priv->rxdb)
 		goto err_mem;
 
 	priv->rxf_fifo0.m.pktsz = priv->ndev->mtu + VLAN_ETH_HLEN;
@@ -1114,7 +1112,8 @@ static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
 	ENTER;
 	dno = bdx_rxdb_available(db) - 1;
 	while (dno > 0) {
-		if (!(skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN))) {
+		skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN);
+		if (!skb) {
 			pr_err("NO MEM: dev_alloc_skb failed\n");
 			break;
 		}
@@ -1934,8 +1933,9 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		RET(-ENOMEM);
 
     /************** pci *****************/
-	if ((err = pci_enable_device(pdev)))	/* it trigers interrupt, dunno why. */
-		goto err_pci;			/* it's not a problem though */
+	err = pci_enable_device(pdev);
+	if (err)			/* it triggers interrupt, dunno why. */
+		goto err_pci;		/* it's not a problem though */
 
 	if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) &&
 	    !(err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))) {
@@ -1949,7 +1949,8 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_using_dac = 0;
 	}
 
-	if ((err = pci_request_regions(pdev, BDX_DRV_NAME)))
+	err = pci_request_regions(pdev, BDX_DRV_NAME);
+	if (err)
 		goto err_dma;
 
 	pci_set_master(pdev);
@@ -1960,7 +1961,8 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pr_err("no MMIO resource\n");
 		goto err_out_res;
 	}
-	if ((regionSize = pci_resource_len(pdev, 0)) < BDX_REGS_SIZE) {
+	regionSize = pci_resource_len(pdev, 0);
+	if (regionSize < BDX_REGS_SIZE) {
 		err = -EIO;
 		pr_err("MMIO resource (%x) too small\n", regionSize);
 		goto err_out_res;
@@ -1992,7 +1994,8 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	nic->irq_type = IRQ_INTX;
 #ifdef BDX_MSI
 	if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) {
-		if ((err = pci_enable_msi(pdev)))
+		err = pci_enable_msi(pdev);
+		if (err)
 			pr_err("Can't eneble msi. error is %d\n", err);
 		else
 			nic->irq_type = IRQ_MSI;
@@ -2002,7 +2005,8 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
     /************** netdev **************/
 	for (port = 0; port < nic->port_num; port++) {
-		if (!(ndev = alloc_etherdev(sizeof(struct bdx_priv)))) {
+		ndev = alloc_etherdev(sizeof(struct bdx_priv));
+		if (!ndev) {
 			err = -ENOMEM;
 			pr_err("alloc_etherdev failed\n");
 			goto err_out_iomap;
@@ -2075,7 +2079,8 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			goto err_out_iomap;
 		}
 		SET_NETDEV_DEV(ndev, &pdev->dev);
-		if ((err = register_netdev(ndev))) {
+		err = register_netdev(ndev);
+		if (err) {
 			pr_err("register_netdev failed\n");
 			goto err_out_free;
 		}
-- 
cgit v1.2.3


From 249658d5c24e42f19b3721b654d64a46816e9b0e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:24 +0000
Subject: drivers/net/tehuti.c: trivial checkpatch cleanups

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tehuti.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index fdf87ea7bc4e..b295b926bc45 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -419,7 +419,7 @@ static int bdx_hw_start(struct bdx_priv *priv)
 	WRITE_REG(priv, regGMAC_RXF_A, GMAC_RX_FILTER_OSEN |
 		  GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB);
 
-#define BDX_IRQ_TYPE	((priv->nic->irq_type == IRQ_MSI)?0:IRQF_SHARED)
+#define BDX_IRQ_TYPE	((priv->nic->irq_type == IRQ_MSI) ? 0 : IRQF_SHARED)
 
 	rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE,
 			 ndev->name, ndev);
@@ -1605,7 +1605,7 @@ static inline int bdx_tx_space(struct bdx_priv *priv)
 	fsize = f->m.rptr - f->m.wptr;
 	if (fsize <= 0)
 		fsize = f->m.memsz + fsize;
-	return (fsize);
+	return fsize;
 }
 
 /* bdx_tx_transmit - send packet to NIC
@@ -2295,13 +2295,13 @@ bdx_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
 /* Convert RX fifo size to number of pending packets */
 static inline int bdx_rx_fifo_size_to_packets(int rx_size)
 {
-	return ((FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc));
+	return (FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc);
 }
 
 /* Convert TX fifo size to number of pending packets */
 static inline int bdx_tx_fifo_size_to_packets(int tx_size)
 {
-	return ((FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ);
+	return (FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ;
 }
 
 /*
@@ -2393,10 +2393,10 @@ static int bdx_get_sset_count(struct net_device *netdev, int stringset)
 	case ETH_SS_STATS:
 		BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
 			   != sizeof(struct bdx_stats) / sizeof(u64));
-		return ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)	: 0);
-	default:
-		return -EINVAL;
+		return (priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)	: 0;
 	}
+
+	return -EINVAL;
 }
 
 /*
-- 
cgit v1.2.3


From 13ff83b90f1dfae1068a250e8d99d3f9991cfa9d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:25 +0000
Subject: drivers/net/pcnet32.c: Use (pr|netdev|netif)_<levels> macro helpers

Make the output logging messages a bit more consistent.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcnet32.c | 347 +++++++++++++++++++-------------------------------
 1 file changed, 130 insertions(+), 217 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 3522794550dd..9194abc11eef 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -21,6 +21,8 @@
  *
  *************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"pcnet32"
 #define DRV_VERSION	"1.35"
 #define DRV_RELDATE	"21.Apr.2008"
@@ -487,10 +489,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev,
 					   (1 << size),
 					   &new_ring_dma_addr);
 	if (new_tx_ring == NULL) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Consistent memory allocation failed.\n",
-			       dev->name);
+		netif_err(lp, drv, dev, "Consistent memory allocation failed\n");
 		return;
 	}
 	memset(new_tx_ring, 0, sizeof(struct pcnet32_tx_head) * (1 << size));
@@ -498,18 +497,14 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev,
 	new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t),
 				GFP_ATOMIC);
 	if (!new_dma_addr_list) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Memory allocation failed.\n", dev->name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		goto free_new_tx_ring;
 	}
 
 	new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *),
 				GFP_ATOMIC);
 	if (!new_skb_list) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Memory allocation failed.\n", dev->name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		goto free_new_lists;
 	}
 
@@ -565,10 +560,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 					   (1 << size),
 					   &new_ring_dma_addr);
 	if (new_rx_ring == NULL) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Consistent memory allocation failed.\n",
-			       dev->name);
+		netif_err(lp, drv, dev, "Consistent memory allocation failed\n");
 		return;
 	}
 	memset(new_rx_ring, 0, sizeof(struct pcnet32_rx_head) * (1 << size));
@@ -576,18 +568,14 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 	new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t),
 				GFP_ATOMIC);
 	if (!new_dma_addr_list) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Memory allocation failed.\n", dev->name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		goto free_new_rx_ring;
 	}
 
 	new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *),
 				GFP_ATOMIC);
 	if (!new_skb_list) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Memory allocation failed.\n", dev->name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		goto free_new_lists;
 	}
 
@@ -604,10 +592,8 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 		new_skb_list[new] = dev_alloc_skb(PKT_BUF_SKB);
 		if (!(rx_skbuff = new_skb_list[new])) {
 			/* keep the original lists and buffers */
-			if (netif_msg_drv(lp))
-				printk(KERN_ERR
-				       "%s: pcnet32_realloc_rx_ring dev_alloc_skb failed.\n",
-				       dev->name);
+			netif_err(lp, drv, dev, "%s dev_alloc_skb failed\n",
+				  __func__);
 			goto free_all_new;
 		}
 		skb_reserve(rx_skbuff, NET_IP_ALIGN);
@@ -838,10 +824,8 @@ static int pcnet32_set_ringparam(struct net_device *dev,
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 
-	if (netif_msg_drv(lp))
-		printk(KERN_INFO
-		       "%s: Ring Param Settings: RX: %d, TX: %d\n", dev->name,
-		       lp->rx_ring_size, lp->tx_ring_size);
+	netif_info(lp, drv, dev, "Ring Param Settings: RX: %d, TX: %d\n",
+		   lp->rx_ring_size, lp->tx_ring_size);
 
 	return 0;
 }
@@ -871,17 +855,15 @@ static void pcnet32_ethtool_test(struct net_device *dev,
 	if (test->flags == ETH_TEST_FL_OFFLINE) {
 		rc = pcnet32_loopback_test(dev, data);
 		if (rc) {
-			if (netif_msg_hw(lp))
-				printk(KERN_DEBUG "%s: Loopback test failed.\n",
-				       dev->name);
+			netif_printk(lp, hw, KERN_DEBUG, dev,
+				     "Loopback test failed\n");
 			test->flags |= ETH_TEST_FL_FAILED;
-		} else if (netif_msg_hw(lp))
-			printk(KERN_DEBUG "%s: Loopback test passed.\n",
-			       dev->name);
-	} else if (netif_msg_hw(lp))
-		printk(KERN_DEBUG
-		       "%s: No tests to run (specify 'Offline' on ethtool).",
-		       dev->name);
+		} else
+			netif_printk(lp, hw, KERN_DEBUG, dev,
+				     "Loopback test passed\n");
+	} else
+		netif_printk(lp, hw, KERN_DEBUG, dev,
+			     "No tests to run (specify 'Offline' on ethtool)\n");
 }				/* end pcnet32_ethtool_test */
 
 static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
@@ -927,10 +909,9 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 	size = data_len + 15;
 	for (x = 0; x < numbuffs; x++) {
 		if (!(skb = dev_alloc_skb(size))) {
-			if (netif_msg_hw(lp))
-				printk(KERN_DEBUG
-				       "%s: Cannot allocate skb at line: %d!\n",
-				       dev->name, __LINE__);
+			netif_printk(lp, hw, KERN_DEBUG, dev,
+				     "Cannot allocate skb at line: %d!\n",
+				     __LINE__);
 			goto clean_up;
 		} else {
 			packet = skb->data;
@@ -984,9 +965,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 			ticks++;
 		}
 		if (ticks == 200) {
-			if (netif_msg_hw(lp))
-				printk("%s: Desc %d failed to reset!\n",
-				       dev->name, x);
+			netif_err(lp, hw, dev, "Desc %d failed to reset!\n", x);
 			break;
 		}
 	}
@@ -994,15 +973,15 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 	lp->a.write_csr(ioaddr, CSR0, CSR0_STOP);	/* Set STOP bit */
 	wmb();
 	if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) {
-		printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name);
+		netdev_printk(KERN_DEBUG, dev, "RX loopback packets:\n");
 
 		for (x = 0; x < numbuffs; x++) {
-			printk(KERN_DEBUG "%s: Packet %d:\n", dev->name, x);
+			netdev_printk(KERN_DEBUG, dev, "Packet %d: ", x);
 			skb = lp->rx_skbuff[x];
 			for (i = 0; i < size; i++) {
-				printk("%02x ", *(skb->data + i));
+				pr_cont(" %02x", *(skb->data + i));
 			}
-			printk("\n");
+			pr_cont("\n");
 		}
 	}
 
@@ -1013,11 +992,9 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 		packet = lp->tx_skbuff[x]->data;
 		for (i = 0; i < size; i++) {
 			if (*(skb->data + i) != packet[i]) {
-				if (netif_msg_hw(lp))
-					printk(KERN_DEBUG
-					       "%s: Error in compare! %2x - %02x %02x\n",
-					       dev->name, i, *(skb->data + i),
-					       packet[i]);
+				netif_printk(lp, hw, KERN_DEBUG, dev,
+					     "Error in compare! %2x - %02x %02x\n",
+					     i, *(skb->data + i), packet[i]);
 				rc = 1;
 				break;
 			}
@@ -1136,10 +1113,8 @@ static int pcnet32_suspend(struct net_device *dev, unsigned long *flags,
 		spin_lock_irqsave(&lp->lock, *flags);
 		ticks++;
 		if (ticks > 200) {
-			if (netif_msg_hw(lp))
-				printk(KERN_DEBUG
-				       "%s: Error getting into suspend!\n",
-				       dev->name);
+			netif_printk(lp, hw, KERN_DEBUG, dev,
+				     "Error getting into suspend!\n");
 			return 0;
 		}
 	}
@@ -1184,15 +1159,13 @@ static void pcnet32_rx_entry(struct net_device *dev,
 
 	/* Discard oversize frames. */
 	if (unlikely(pkt_len > PKT_BUF_SIZE)) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR "%s: Impossible packet size %d!\n",
-			       dev->name, pkt_len);
+		netif_err(lp, drv, dev, "Impossible packet size %d!\n",
+			  pkt_len);
 		dev->stats.rx_errors++;
 		return;
 	}
 	if (pkt_len < 60) {
-		if (netif_msg_rx_err(lp))
-			printk(KERN_ERR "%s: Runt packet!\n", dev->name);
+		netif_err(lp, rx_err, dev, "Runt packet!\n");
 		dev->stats.rx_errors++;
 		return;
 	}
@@ -1223,10 +1196,7 @@ static void pcnet32_rx_entry(struct net_device *dev,
 	}
 
 	if (skb == NULL) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: Memory squeeze, dropping packet.\n",
-			       dev->name);
+		netif_err(lp, drv, dev, "Memory squeeze, dropping packet\n");
 		dev->stats.rx_dropped++;
 		return;
 	}
@@ -1297,11 +1267,9 @@ static int pcnet32_tx(struct net_device *dev)
 			/* There was a major error, log it. */
 			int err_status = le32_to_cpu(lp->tx_ring[entry].misc);
 			dev->stats.tx_errors++;
-			if (netif_msg_tx_err(lp))
-				printk(KERN_ERR
-				       "%s: Tx error status=%04x err_status=%08x\n",
-				       dev->name, status,
-				       err_status);
+			netif_err(lp, tx_err, dev,
+				  "Tx error status=%04x err_status=%08x\n",
+				  status, err_status);
 			if (err_status & 0x04000000)
 				dev->stats.tx_aborted_errors++;
 			if (err_status & 0x08000000)
@@ -1313,10 +1281,7 @@ static int pcnet32_tx(struct net_device *dev)
 				dev->stats.tx_fifo_errors++;
 				/* Ackk!  On FIFO errors the Tx unit is turned off! */
 				/* Remove this verbosity later! */
-				if (netif_msg_tx_err(lp))
-					printk(KERN_ERR
-					       "%s: Tx FIFO error!\n",
-					       dev->name);
+				netif_err(lp, tx_err, dev, "Tx FIFO error!\n");
 				must_restart = 1;
 			}
 #else
@@ -1325,10 +1290,7 @@ static int pcnet32_tx(struct net_device *dev)
 				if (!lp->dxsuflo) {	/* If controller doesn't recover ... */
 					/* Ackk!  On FIFO errors the Tx unit is turned off! */
 					/* Remove this verbosity later! */
-					if (netif_msg_tx_err(lp))
-						printk(KERN_ERR
-						       "%s: Tx FIFO error!\n",
-						       dev->name);
+					netif_err(lp, tx_err, dev, "Tx FIFO error!\n");
 					must_restart = 1;
 				}
 			}
@@ -1354,11 +1316,8 @@ static int pcnet32_tx(struct net_device *dev)
 
 	delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size);
 	if (delta > lp->tx_ring_size) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR
-			       "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
-			       dev->name, dirty_tx, lp->cur_tx,
-			       lp->tx_full);
+		netif_err(lp, drv, dev, "out-of-sync dirty pointer, %d vs. %d, full=%d\n",
+			  dirty_tx, lp->cur_tx, lp->tx_full);
 		dirty_tx += lp->tx_ring_size;
 		delta -= lp->tx_ring_size;
 	}
@@ -1535,8 +1494,7 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 	err = pci_enable_device(pdev);
 	if (err < 0) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX
-			       "failed to enable device -- err=%d\n", err);
+			pr_err("failed to enable device -- err=%d\n", err);
 		return err;
 	}
 	pci_set_master(pdev);
@@ -1544,22 +1502,19 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ioaddr = pci_resource_start(pdev, 0);
 	if (!ioaddr) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX
-			       "card has no PCI IO resources, aborting\n");
+			pr_err("card has no PCI IO resources, aborting\n");
 		return -ENODEV;
 	}
 
 	if (!pci_dma_supported(pdev, PCNET32_DMA_MASK)) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX
-			       "architecture does not support 32bit PCI busmaster DMA\n");
+			pr_err("architecture does not support 32bit PCI busmaster DMA\n");
 		return -ENODEV;
 	}
 	if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci") ==
 	    NULL) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX
-			       "io address range already allocated\n");
+			pr_err("io address range already allocated\n");
 		return -EBUSY;
 	}
 
@@ -1616,7 +1571,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 			a = &pcnet32_dwio;
 		} else {
 			if (pcnet32_debug & NETIF_MSG_PROBE)
-				printk(KERN_ERR PFX "No access methods\n");
+				pr_err("No access methods\n");
 			goto err_release_region;
 		}
 	}
@@ -1624,11 +1579,10 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	chip_version =
 	    a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr, 89) << 16);
 	if ((pcnet32_debug & NETIF_MSG_PROBE) && (pcnet32_debug & NETIF_MSG_HW))
-		printk(KERN_INFO "  PCnet chip version is %#x.\n",
-		       chip_version);
+		pr_info("  PCnet chip version is %#x\n", chip_version);
 	if ((chip_version & 0xfff) != 0x003) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_INFO PFX "Unsupported chip version.\n");
+			pr_info("Unsupported chip version\n");
 		goto err_release_region;
 	}
 
@@ -1681,7 +1635,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		if (cards_found < MAX_UNITS && homepna[cards_found])
 			media |= 1;	/* switch to home wiring mode */
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_DEBUG PFX "media set to %sMbit mode.\n",
+			printk(KERN_DEBUG PFX "media set to %sMbit mode\n",
 			       (media & 1) ? "1" : "10");
 		a->write_bcr(ioaddr, 49, media);
 		break;
@@ -1697,9 +1651,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		break;
 	default:
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_INFO PFX
-			       "PCnet version %#x, no PCnet32 chip.\n",
-			       chip_version);
+			pr_info("PCnet version %#x, no PCnet32 chip\n",
+				chip_version);
 		goto err_release_region;
 	}
 
@@ -1721,7 +1674,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	dev = alloc_etherdev(sizeof(*lp));
 	if (!dev) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX "Memory allocation failed.\n");
+			pr_err("Memory allocation failed\n");
 		ret = -ENOMEM;
 		goto err_release_region;
 	}
@@ -1730,7 +1683,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pcnet32_debug & NETIF_MSG_PROBE)
-		printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
+		pr_info("%s at %#3lx,", chipname, ioaddr);
 
 	/* In most chips, after a chip reset, the ethernet address is read from the
 	 * station address PROM at the base address and programmed into the
@@ -1755,9 +1708,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	    !is_valid_ether_addr(dev->dev_addr)) {
 		if (is_valid_ether_addr(promaddr)) {
 			if (pcnet32_debug & NETIF_MSG_PROBE) {
-				printk(" warning: CSR address invalid,\n");
-				printk(KERN_INFO
-				       "    using instead PROM address of");
+				pr_cont(" warning: CSR address invalid,\n");
+				pr_info("    using instead PROM address of");
 			}
 			memcpy(dev->dev_addr, promaddr, 6);
 		}
@@ -1769,43 +1721,43 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		memset(dev->dev_addr, 0, ETH_ALEN);
 
 	if (pcnet32_debug & NETIF_MSG_PROBE) {
-		printk(" %pM", dev->dev_addr);
+		pr_cont(" %pM", dev->dev_addr);
 
 		/* Version 0x2623 and 0x2624 */
 		if (((chip_version + 1) & 0xfffe) == 0x2624) {
 			i = a->read_csr(ioaddr, 80) & 0x0C00;	/* Check tx_start_pt */
-			printk(KERN_INFO "    tx_start_pt(0x%04x):", i);
+			pr_info("    tx_start_pt(0x%04x):", i);
 			switch (i >> 10) {
 			case 0:
-				printk(KERN_CONT "  20 bytes,");
+				pr_cont("  20 bytes,");
 				break;
 			case 1:
-				printk(KERN_CONT "  64 bytes,");
+				pr_cont("  64 bytes,");
 				break;
 			case 2:
-				printk(KERN_CONT " 128 bytes,");
+				pr_cont(" 128 bytes,");
 				break;
 			case 3:
-				printk(KERN_CONT "~220 bytes,");
+				pr_cont("~220 bytes,");
 				break;
 			}
 			i = a->read_bcr(ioaddr, 18);	/* Check Burst/Bus control */
-			printk(KERN_CONT " BCR18(%x):", i & 0xffff);
+			pr_cont(" BCR18(%x):", i & 0xffff);
 			if (i & (1 << 5))
-				printk(KERN_CONT "BurstWrEn ");
+				pr_cont("BurstWrEn ");
 			if (i & (1 << 6))
-				printk(KERN_CONT "BurstRdEn ");
+				pr_cont("BurstRdEn ");
 			if (i & (1 << 7))
-				printk(KERN_CONT "DWordIO ");
+				pr_cont("DWordIO ");
 			if (i & (1 << 11))
-				printk(KERN_CONT "NoUFlow ");
+				pr_cont("NoUFlow ");
 			i = a->read_bcr(ioaddr, 25);
-			printk(KERN_INFO "    SRAMSIZE=0x%04x,", i << 8);
+			pr_info("    SRAMSIZE=0x%04x,", i << 8);
 			i = a->read_bcr(ioaddr, 26);
-			printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8);
+			pr_cont(" SRAM_BND=0x%04x,", i << 8);
 			i = a->read_bcr(ioaddr, 27);
 			if (i & (1 << 14))
-				printk(KERN_CONT "LowLatRx");
+				pr_cont("LowLatRx");
 		}
 	}
 
@@ -1815,8 +1767,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	if ((lp->init_block =
 	     pci_alloc_consistent(pdev, sizeof(*lp->init_block), &lp->init_dma_addr)) == NULL) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX
-			       "Consistent memory allocation failed.\n");
+			pr_err("Consistent memory allocation failed\n");
 		ret = -ENOMEM;
 		goto err_free_netdev;
 	}
@@ -1890,7 +1841,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	if (pdev) {		/* use the IRQ provided by PCI */
 		dev->irq = pdev->irq;
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(" assigned IRQ %d.\n", dev->irq);
+			pr_cont(" assigned IRQ %d\n", dev->irq);
 	} else {
 		unsigned long irq_mask = probe_irq_on();
 
@@ -1906,12 +1857,12 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		dev->irq = probe_irq_off(irq_mask);
 		if (!dev->irq) {
 			if (pcnet32_debug & NETIF_MSG_PROBE)
-				printk(", failed to detect IRQ line.\n");
+				pr_cont(", failed to detect IRQ line\n");
 			ret = -ENODEV;
 			goto err_free_ring;
 		}
 		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(", probed IRQ %d.\n", dev->irq);
+			pr_cont(", probed IRQ %d\n", dev->irq);
 	}
 
 	/* Set the mii phy_id so that we can query the link state */
@@ -1935,9 +1886,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 			lp->phymask |= (1 << i);
 			lp->mii_if.phy_id = i;
 			if (pcnet32_debug & NETIF_MSG_PROBE)
-				printk(KERN_INFO PFX
-				       "Found PHY %04x:%04x at address %d.\n",
-				       id1, id2, i);
+				pr_info("Found PHY %04x:%04x at address %d\n",
+					id1, id2, i);
 		}
 		lp->a.write_bcr(ioaddr, 33, (lp->mii_if.phy_id) << 5);
 		if (lp->phycount > 1) {
@@ -1966,7 +1916,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	}
 
 	if (pcnet32_debug & NETIF_MSG_PROBE)
-		printk(KERN_INFO "%s: registered as %s\n", dev->name, lp->name);
+		pr_info("%s: registered as %s\n", dev->name, lp->name);
 	cards_found++;
 
 	/* enable LED writes */
@@ -1995,10 +1945,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 					   lp->tx_ring_size,
 					   &lp->tx_ring_dma_addr);
 	if (lp->tx_ring == NULL) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR PFX
-			       "%s: Consistent memory allocation failed.\n",
-			       name);
+		netif_err(lp, drv, dev, "Consistent memory allocation failed\n");
 		return -ENOMEM;
 	}
 
@@ -2007,46 +1954,35 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
 					   lp->rx_ring_size,
 					   &lp->rx_ring_dma_addr);
 	if (lp->rx_ring == NULL) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR PFX
-			       "%s: Consistent memory allocation failed.\n",
-			       name);
+		netif_err(lp, drv, dev, "Consistent memory allocation failed\n");
 		return -ENOMEM;
 	}
 
 	lp->tx_dma_addr = kcalloc(lp->tx_ring_size, sizeof(dma_addr_t),
 				  GFP_ATOMIC);
 	if (!lp->tx_dma_addr) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR PFX
-			       "%s: Memory allocation failed.\n", name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		return -ENOMEM;
 	}
 
 	lp->rx_dma_addr = kcalloc(lp->rx_ring_size, sizeof(dma_addr_t),
 				  GFP_ATOMIC);
 	if (!lp->rx_dma_addr) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR PFX
-			       "%s: Memory allocation failed.\n", name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		return -ENOMEM;
 	}
 
 	lp->tx_skbuff = kcalloc(lp->tx_ring_size, sizeof(struct sk_buff *),
 				GFP_ATOMIC);
 	if (!lp->tx_skbuff) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR PFX
-			       "%s: Memory allocation failed.\n", name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		return -ENOMEM;
 	}
 
 	lp->rx_skbuff = kcalloc(lp->rx_ring_size, sizeof(struct sk_buff *),
 				GFP_ATOMIC);
 	if (!lp->rx_skbuff) {
-		if (netif_msg_drv(lp))
-			printk(KERN_ERR PFX
-			       "%s: Memory allocation failed.\n", name);
+		netif_err(lp, drv, dev, "Memory allocation failed\n");
 		return -ENOMEM;
 	}
 
@@ -2115,12 +2051,11 @@ static int pcnet32_open(struct net_device *dev)
 	/* switch pcnet32 to 32bit mode */
 	lp->a.write_bcr(ioaddr, 20, 2);
 
-	if (netif_msg_ifup(lp))
-		printk(KERN_DEBUG
-		       "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n",
-		       dev->name, dev->irq, (u32) (lp->tx_ring_dma_addr),
-		       (u32) (lp->rx_ring_dma_addr),
-		       (u32) (lp->init_dma_addr));
+	netif_printk(lp, ifup, KERN_DEBUG, dev,
+		     "%s() irq %d tx/rx rings %#x/%#x init %#x\n",
+		     __func__, dev->irq, (u32) (lp->tx_ring_dma_addr),
+		     (u32) (lp->rx_ring_dma_addr),
+		     (u32) (lp->init_dma_addr));
 
 	/* set/reset autoselect bit */
 	val = lp->a.read_bcr(ioaddr, 2) & ~2;
@@ -2155,10 +2090,8 @@ static int pcnet32_open(struct net_device *dev)
 	     pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
 		if (lp->options & PCNET32_PORT_ASEL) {
 			lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
-			if (netif_msg_link(lp))
-				printk(KERN_DEBUG
-				       "%s: Setting 100Mb-Full Duplex.\n",
-				       dev->name);
+			netif_printk(lp, link, KERN_DEBUG, dev,
+				     "Setting 100Mb-Full Duplex\n");
 		}
 	}
 	if (lp->phycount < 2) {
@@ -2246,9 +2179,7 @@ static int pcnet32_open(struct net_device *dev)
 			}
 		}
 		lp->mii_if.phy_id = first_phy;
-		if (netif_msg_link(lp))
-			printk(KERN_INFO "%s: Using PHY number %d.\n",
-			       dev->name, first_phy);
+		netif_info(lp, link, dev, "Using PHY number %d\n", first_phy);
 	}
 
 #ifdef DO_DXSUFLO
@@ -2295,12 +2226,11 @@ static int pcnet32_open(struct net_device *dev)
 	 */
 	lp->a.write_csr(ioaddr, CSR0, CSR0_NORMAL);
 
-	if (netif_msg_ifup(lp))
-		printk(KERN_DEBUG
-		       "%s: pcnet32 open after %d ticks, init block %#x csr0 %4.4x.\n",
-		       dev->name, i,
-		       (u32) (lp->init_dma_addr),
-		       lp->a.read_csr(ioaddr, CSR0));
+	netif_printk(lp, ifup, KERN_DEBUG, dev,
+		     "pcnet32 open after %d ticks, init block %#x csr0 %4.4x\n",
+		     i,
+		     (u32) (lp->init_dma_addr),
+		     lp->a.read_csr(ioaddr, CSR0));
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 
@@ -2371,10 +2301,8 @@ static int pcnet32_init_ring(struct net_device *dev)
 			    (rx_skbuff = lp->rx_skbuff[i] =
 			     dev_alloc_skb(PKT_BUF_SKB))) {
 				/* there is not much, we can do at this point */
-				if (netif_msg_drv(lp))
-					printk(KERN_ERR
-					       "%s: pcnet32_init_ring dev_alloc_skb failed.\n",
-					       dev->name);
+				netif_err(lp, drv, dev, "%s dev_alloc_skb failed\n",
+					  __func__);
 				return -1;
 			}
 			skb_reserve(rx_skbuff, NET_IP_ALIGN);
@@ -2424,10 +2352,9 @@ static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits)
 		if (lp->a.read_csr(ioaddr, CSR0) & CSR0_STOP)
 			break;
 
-	if (i >= 100 && netif_msg_drv(lp))
-		printk(KERN_ERR
-		       "%s: pcnet32_restart timed out waiting for stop.\n",
-		       dev->name);
+	if (i >= 100)
+		netif_err(lp, drv, dev, "%s timed out waiting for stop\n",
+			  __func__);
 
 	pcnet32_purge_tx_ring(dev);
 	if (pcnet32_init_ring(dev))
@@ -2451,8 +2378,7 @@ static void pcnet32_tx_timeout(struct net_device *dev)
 	spin_lock_irqsave(&lp->lock, flags);
 	/* Transmitter timeout, serious problems. */
 	if (pcnet32_debug & NETIF_MSG_DRV)
-		printk(KERN_ERR
-		       "%s: transmit timed out, status %4.4x, resetting.\n",
+		pr_err("%s: transmit timed out, status %4.4x, resetting\n",
 		       dev->name, lp->a.read_csr(ioaddr, CSR0));
 	lp->a.write_csr(ioaddr, CSR0, CSR0_STOP);
 	dev->stats.tx_errors++;
@@ -2495,11 +2421,9 @@ static netdev_tx_t pcnet32_start_xmit(struct sk_buff *skb,
 
 	spin_lock_irqsave(&lp->lock, flags);
 
-	if (netif_msg_tx_queued(lp)) {
-		printk(KERN_DEBUG
-		       "%s: pcnet32_start_xmit() called, csr0 %4.4x.\n",
-		       dev->name, lp->a.read_csr(ioaddr, CSR0));
-	}
+	netif_printk(lp, tx_queued, KERN_DEBUG, dev,
+		     "%s() called, csr0 %4.4x\n",
+		     __func__, lp->a.read_csr(ioaddr, CSR0));
 
 	/* Default status -- will not enable Successful-TxDone
 	 * interrupt when that option is available to us.
@@ -2564,10 +2488,9 @@ pcnet32_interrupt(int irq, void *dev_id)
 		/* Acknowledge all of the current interrupt sources ASAP. */
 		lp->a.write_csr(ioaddr, CSR0, csr0 & ~0x004f);
 
-		if (netif_msg_intr(lp))
-			printk(KERN_DEBUG
-			       "%s: interrupt  csr0=%#2.2x new csr=%#2.2x.\n",
-			       dev->name, csr0, lp->a.read_csr(ioaddr, CSR0));
+		netif_printk(lp, intr, KERN_DEBUG, dev,
+			     "interrupt  csr0=%#2.2x new csr=%#2.2x\n",
+			     csr0, lp->a.read_csr(ioaddr, CSR0));
 
 		/* Log misc errors. */
 		if (csr0 & 0x4000)
@@ -2587,10 +2510,8 @@ pcnet32_interrupt(int irq, void *dev_id)
 			dev->stats.rx_errors++;	/* Missed a Rx frame. */
 		}
 		if (csr0 & 0x0800) {
-			if (netif_msg_drv(lp))
-				printk(KERN_ERR
-				       "%s: Bus master arbitration failure, status %4.4x.\n",
-				       dev->name, csr0);
+			netif_err(lp, drv, dev, "Bus master arbitration failure, status %4.4x\n",
+				  csr0);
 			/* unlike for the lance, there is no restart needed */
 		}
 		if (napi_schedule_prep(&lp->napi)) {
@@ -2606,9 +2527,9 @@ pcnet32_interrupt(int irq, void *dev_id)
 		csr0 = lp->a.read_csr(ioaddr, CSR0);
 	}
 
-	if (netif_msg_intr(lp))
-		printk(KERN_DEBUG "%s: exiting interrupt, csr0=%#4.4x.\n",
-		       dev->name, lp->a.read_csr(ioaddr, CSR0));
+	netif_printk(lp, intr, KERN_DEBUG, dev,
+		     "exiting interrupt, csr0=%#4.4x\n",
+		     lp->a.read_csr(ioaddr, CSR0));
 
 	spin_unlock(&lp->lock);
 
@@ -2630,10 +2551,9 @@ static int pcnet32_close(struct net_device *dev)
 
 	dev->stats.rx_missed_errors = lp->a.read_csr(ioaddr, 112);
 
-	if (netif_msg_ifdown(lp))
-		printk(KERN_DEBUG
-		       "%s: Shutting down ethercard, status was %2.2x.\n",
-		       dev->name, lp->a.read_csr(ioaddr, CSR0));
+	netif_printk(lp, ifdown, KERN_DEBUG, dev,
+		     "Shutting down ethercard, status was %2.2x\n",
+		     lp->a.read_csr(ioaddr, CSR0));
 
 	/* We stop the PCNET32 here -- it occasionally polls memory if we don't. */
 	lp->a.write_csr(ioaddr, CSR0, CSR0_STOP);
@@ -2730,9 +2650,7 @@ static void pcnet32_set_multicast_list(struct net_device *dev)
 	csr15 = lp->a.read_csr(ioaddr, CSR15);
 	if (dev->flags & IFF_PROMISC) {
 		/* Log any net taps. */
-		if (netif_msg_hw(lp))
-			printk(KERN_INFO "%s: Promiscuous mode enabled.\n",
-			       dev->name);
+		netif_info(lp, hw, dev, "Promiscuous mode enabled\n");
 		lp->init_block->mode =
 		    cpu_to_le16(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) <<
 				7);
@@ -2819,10 +2737,8 @@ static int pcnet32_check_otherphy(struct net_device *dev)
 			mii.phy_id = i;
 			if (mii_link_ok(&mii)) {
 				/* found PHY with active link */
-				if (netif_msg_link(lp))
-					printk(KERN_INFO
-					       "%s: Using PHY number %d.\n",
-					       dev->name, i);
+				netif_info(lp, link, dev, "Using PHY number %d\n",
+					   i);
 
 				/* isolate inactive phy */
 				bmcr =
@@ -2868,8 +2784,7 @@ static void pcnet32_check_media(struct net_device *dev, int verbose)
 	if (!curr_link) {
 		if (prev_link || verbose) {
 			netif_carrier_off(dev);
-			if (netif_msg_link(lp))
-				printk(KERN_INFO "%s: link down\n", dev->name);
+			netif_info(lp, link, dev, "link down\n");
 		}
 		if (lp->phycount > 1) {
 			curr_link = pcnet32_check_otherphy(dev);
@@ -2881,12 +2796,11 @@ static void pcnet32_check_media(struct net_device *dev, int verbose)
 			if (netif_msg_link(lp)) {
 				struct ethtool_cmd ecmd;
 				mii_ethtool_gset(&lp->mii_if, &ecmd);
-				printk(KERN_INFO
-				       "%s: link up, %sMbps, %s-duplex\n",
-				       dev->name,
-				       (ecmd.speed == SPEED_100) ? "100" : "10",
-				       (ecmd.duplex ==
-					DUPLEX_FULL) ? "full" : "half");
+				netdev_info(dev, "link up, %sMbps, %s-duplex\n",
+					    (ecmd.speed == SPEED_100)
+					    ? "100" : "10",
+					    (ecmd.duplex == DUPLEX_FULL)
+					    ? "full" : "half");
 			}
 			bcr9 = lp->a.read_bcr(dev->base_addr, 9);
 			if ((bcr9 & (1 << 0)) != lp->mii_if.full_duplex) {
@@ -2897,8 +2811,7 @@ static void pcnet32_check_media(struct net_device *dev, int verbose)
 				lp->a.write_bcr(dev->base_addr, 9, bcr9);
 			}
 		} else {
-			if (netif_msg_link(lp))
-				printk(KERN_INFO "%s: link up\n", dev->name);
+			netif_info(lp, link, dev, "link up\n");
 		}
 	}
 }
@@ -3010,7 +2923,7 @@ MODULE_LICENSE("GPL");
 
 static int __init pcnet32_init_module(void)
 {
-	printk(KERN_INFO "%s", version);
+	pr_info("%s", version);
 
 	pcnet32_debug = netif_msg_init(debug, PCNET32_MSG_DEFAULT);
 
@@ -3026,7 +2939,7 @@ static int __init pcnet32_init_module(void)
 		pcnet32_probe_vlbus(pcnet32_portlist);
 
 	if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE))
-		printk(KERN_INFO PFX "%d cards_found.\n", cards_found);
+		pr_info("%d cards_found\n", cards_found);
 
 	return (pcnet32_have_pci + cards_found) ? 0 : -ENODEV;
 }
-- 
cgit v1.2.3


From 9e3f8063a72a946f2ba29068b34190436573dffe Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Feb 2010 08:34:26 +0000
Subject: drivers/net/pcnet32.c: Checkpatch cleaning

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcnet32.c | 153 ++++++++++++++++++++++++--------------------------
 1 file changed, 73 insertions(+), 80 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 9194abc11eef..63e03159daf7 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -52,10 +52,10 @@ static const char *const version =
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
 #include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 #include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/irq.h>
 
 /*
@@ -85,7 +85,7 @@ static int cards_found;
 static unsigned int pcnet32_portlist[] __initdata =
     { 0x300, 0x320, 0x340, 0x360, 0 };
 
-static int pcnet32_debug = 0;
+static int pcnet32_debug;
 static int tx_start = 1;	/* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */
 static int pcnet32vlb;		/* check for VLB cards ? */
 
@@ -392,7 +392,7 @@ static struct pcnet32_access pcnet32_wio = {
 static u16 pcnet32_dwio_read_csr(unsigned long addr, int index)
 {
 	outl(index, addr + PCNET32_DWIO_RAP);
-	return (inl(addr + PCNET32_DWIO_RDP) & 0xffff);
+	return inl(addr + PCNET32_DWIO_RDP) & 0xffff;
 }
 
 static void pcnet32_dwio_write_csr(unsigned long addr, int index, u16 val)
@@ -404,7 +404,7 @@ static void pcnet32_dwio_write_csr(unsigned long addr, int index, u16 val)
 static u16 pcnet32_dwio_read_bcr(unsigned long addr, int index)
 {
 	outl(index, addr + PCNET32_DWIO_RAP);
-	return (inl(addr + PCNET32_DWIO_BDP) & 0xffff);
+	return inl(addr + PCNET32_DWIO_BDP) & 0xffff;
 }
 
 static void pcnet32_dwio_write_bcr(unsigned long addr, int index, u16 val)
@@ -415,7 +415,7 @@ static void pcnet32_dwio_write_bcr(unsigned long addr, int index, u16 val)
 
 static u16 pcnet32_dwio_read_rap(unsigned long addr)
 {
-	return (inl(addr + PCNET32_DWIO_RAP) & 0xffff);
+	return inl(addr + PCNET32_DWIO_RAP) & 0xffff;
 }
 
 static void pcnet32_dwio_write_rap(unsigned long addr, u16 val)
@@ -524,15 +524,14 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev,
 	lp->tx_skbuff = new_skb_list;
 	return;
 
-    free_new_lists:
+free_new_lists:
 	kfree(new_dma_addr_list);
-    free_new_tx_ring:
+free_new_tx_ring:
 	pci_free_consistent(lp->pci_dev,
 			    sizeof(struct pcnet32_tx_head) *
 			    (1 << size),
 			    new_tx_ring,
 			    new_ring_dma_addr);
-	return;
 }
 
 /*
@@ -587,10 +586,11 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 		new_skb_list[new] = lp->rx_skbuff[new];
 	}
 	/* now allocate any new buffers needed */
-	for (; new < size; new++ ) {
+	for (; new < size; new++) {
 		struct sk_buff *rx_skbuff;
 		new_skb_list[new] = dev_alloc_skb(PKT_BUF_SKB);
-		if (!(rx_skbuff = new_skb_list[new])) {
+		rx_skbuff = new_skb_list[new];
+		if (!rx_skbuff) {
 			/* keep the original lists and buffers */
 			netif_err(lp, drv, dev, "%s dev_alloc_skb failed\n",
 				  __func__);
@@ -630,8 +630,8 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 	lp->rx_skbuff = new_skb_list;
 	return;
 
-    free_all_new:
-	for (; --new >= lp->rx_ring_size; ) {
+free_all_new:
+	while (--new >= lp->rx_ring_size) {
 		if (new_skb_list[new]) {
 			pci_unmap_single(lp->pci_dev, new_dma_addr_list[new],
 					 PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
@@ -639,9 +639,9 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev,
 		}
 	}
 	kfree(new_skb_list);
-    free_new_lists:
+free_new_lists:
 	kfree(new_dma_addr_list);
-    free_new_rx_ring:
+free_new_rx_ring:
 	pci_free_consistent(lp->pci_dev,
 			    sizeof(struct pcnet32_rx_head) *
 			    (1 << size),
@@ -831,7 +831,7 @@ static int pcnet32_set_ringparam(struct net_device *dev,
 }
 
 static void pcnet32_get_strings(struct net_device *dev, u32 stringset,
-				u8 * data)
+				u8 *data)
 {
 	memcpy(data, pcnet32_gstrings_test, sizeof(pcnet32_gstrings_test));
 }
@@ -908,39 +908,39 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 	/* Initialize Transmit buffers. */
 	size = data_len + 15;
 	for (x = 0; x < numbuffs; x++) {
-		if (!(skb = dev_alloc_skb(size))) {
+		skb = dev_alloc_skb(size);
+		if (!skb) {
 			netif_printk(lp, hw, KERN_DEBUG, dev,
 				     "Cannot allocate skb at line: %d!\n",
 				     __LINE__);
 			goto clean_up;
-		} else {
-			packet = skb->data;
-			skb_put(skb, size);	/* create space for data */
-			lp->tx_skbuff[x] = skb;
-			lp->tx_ring[x].length = cpu_to_le16(-skb->len);
-			lp->tx_ring[x].misc = 0;
-
-			/* put DA and SA into the skb */
-			for (i = 0; i < 6; i++)
-				*packet++ = dev->dev_addr[i];
-			for (i = 0; i < 6; i++)
-				*packet++ = dev->dev_addr[i];
-			/* type */
-			*packet++ = 0x08;
-			*packet++ = 0x06;
-			/* packet number */
-			*packet++ = x;
-			/* fill packet with data */
-			for (i = 0; i < data_len; i++)
-				*packet++ = i;
-
-			lp->tx_dma_addr[x] =
-			    pci_map_single(lp->pci_dev, skb->data, skb->len,
-					   PCI_DMA_TODEVICE);
-			lp->tx_ring[x].base = cpu_to_le32(lp->tx_dma_addr[x]);
-			wmb();	/* Make sure owner changes after all others are visible */
-			lp->tx_ring[x].status = cpu_to_le16(status);
 		}
+		packet = skb->data;
+		skb_put(skb, size);	/* create space for data */
+		lp->tx_skbuff[x] = skb;
+		lp->tx_ring[x].length = cpu_to_le16(-skb->len);
+		lp->tx_ring[x].misc = 0;
+
+		/* put DA and SA into the skb */
+		for (i = 0; i < 6; i++)
+			*packet++ = dev->dev_addr[i];
+		for (i = 0; i < 6; i++)
+			*packet++ = dev->dev_addr[i];
+		/* type */
+		*packet++ = 0x08;
+		*packet++ = 0x06;
+		/* packet number */
+		*packet++ = x;
+		/* fill packet with data */
+		for (i = 0; i < data_len; i++)
+			*packet++ = i;
+
+		lp->tx_dma_addr[x] =
+			pci_map_single(lp->pci_dev, skb->data, skb->len,
+				       PCI_DMA_TODEVICE);
+		lp->tx_ring[x].base = cpu_to_le32(lp->tx_dma_addr[x]);
+		wmb();	/* Make sure owner changes after all others are visible */
+		lp->tx_ring[x].status = cpu_to_le16(status);
 	}
 
 	x = a->read_bcr(ioaddr, 32);	/* set internal loopback in BCR32 */
@@ -978,9 +978,8 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 		for (x = 0; x < numbuffs; x++) {
 			netdev_printk(KERN_DEBUG, dev, "Packet %d: ", x);
 			skb = lp->rx_skbuff[x];
-			for (i = 0; i < size; i++) {
+			for (i = 0; i < size; i++)
 				pr_cont(" %02x", *(skb->data + i));
-			}
 			pr_cont("\n");
 		}
 	}
@@ -1002,7 +1001,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 		x++;
 	}
 
-      clean_up:
+clean_up:
 	*data1 = rc;
 	pcnet32_purge_tx_ring(dev);
 
@@ -1021,7 +1020,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1)
 	}
 	spin_unlock_irqrestore(&lp->lock, flags);
 
-	return (rc);
+	return rc;
 }				/* end pcnet32_loopback_test  */
 
 static void pcnet32_led_blink_callback(struct net_device *dev)
@@ -1033,9 +1032,8 @@ static void pcnet32_led_blink_callback(struct net_device *dev)
 	int i;
 
 	spin_lock_irqsave(&lp->lock, flags);
-	for (i = 4; i < 8; i++) {
+	for (i = 4; i < 8; i++)
 		a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
-	}
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT);
@@ -1057,9 +1055,8 @@ static int pcnet32_phys_id(struct net_device *dev, u32 data)
 
 	/* Save the current value of the bcrs */
 	spin_lock_irqsave(&lp->lock, flags);
-	for (i = 4; i < 8; i++) {
+	for (i = 4; i < 8; i++)
 		regs[i - 4] = a->read_bcr(ioaddr, i);
-	}
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	mod_timer(&lp->blink_timer, jiffies);
@@ -1074,9 +1071,8 @@ static int pcnet32_phys_id(struct net_device *dev, u32 data)
 
 	/* Restore the original value of the bcrs */
 	spin_lock_irqsave(&lp->lock, flags);
-	for (i = 4; i < 8; i++) {
+	for (i = 4; i < 8; i++)
 		a->write_bcr(ioaddr, i, regs[i - 4]);
-	}
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	return 0;
@@ -1173,7 +1169,8 @@ static void pcnet32_rx_entry(struct net_device *dev,
 	if (pkt_len > rx_copybreak) {
 		struct sk_buff *newskb;
 
-		if ((newskb = dev_alloc_skb(PKT_BUF_SKB))) {
+		newskb = dev_alloc_skb(PKT_BUF_SKB);
+		if (newskb) {
 			skb_reserve(newskb, NET_IP_ALIGN);
 			skb = lp->rx_skbuff[entry];
 			pci_unmap_single(lp->pci_dev,
@@ -1191,9 +1188,8 @@ static void pcnet32_rx_entry(struct net_device *dev,
 			rx_in_place = 1;
 		} else
 			skb = NULL;
-	} else {
+	} else
 		skb = dev_alloc_skb(pkt_len + NET_IP_ALIGN);
-	}
 
 	if (skb == NULL) {
 		netif_err(lp, drv, dev, "Memory squeeze, dropping packet\n");
@@ -1380,7 +1376,7 @@ static int pcnet32_get_regs_len(struct net_device *dev)
 	struct pcnet32_private *lp = netdev_priv(dev);
 	int j = lp->phycount * PCNET32_REGS_PER_PHY;
 
-	return ((PCNET32_NUM_REGS + j) * sizeof(u16));
+	return (PCNET32_NUM_REGS + j) * sizeof(u16);
 }
 
 static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
@@ -1404,21 +1400,20 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 		*buff++ = inw(ioaddr + i);
 
 	/* read control and status registers */
-	for (i = 0; i < 90; i++) {
+	for (i = 0; i < 90; i++)
 		*buff++ = a->read_csr(ioaddr, i);
-	}
 
 	*buff++ = a->read_csr(ioaddr, 112);
 	*buff++ = a->read_csr(ioaddr, 114);
 
 	/* read bus configuration registers */
-	for (i = 0; i < 30; i++) {
+	for (i = 0; i < 30; i++)
 		*buff++ = a->read_bcr(ioaddr, i);
-	}
+
 	*buff++ = 0;		/* skip bcr30 so as not to hang 79C976 */
-	for (i = 31; i < 36; i++) {
+
+	for (i = 31; i < 36; i++)
 		*buff++ = a->read_bcr(ioaddr, i);
-	}
 
 	/* read mii phy registers */
 	if (lp->mii) {
@@ -1511,17 +1506,16 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pr_err("architecture does not support 32bit PCI busmaster DMA\n");
 		return -ENODEV;
 	}
-	if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci") ==
-	    NULL) {
+	if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci")) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
 			pr_err("io address range already allocated\n");
 		return -EBUSY;
 	}
 
 	err = pcnet32_probe1(ioaddr, 1, pdev);
-	if (err < 0) {
+	if (err < 0)
 		pci_disable_device(pdev);
-	}
+
 	return err;
 }
 
@@ -1764,8 +1758,9 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	dev->base_addr = ioaddr;
 	lp = netdev_priv(dev);
 	/* pci_alloc_consistent returns page-aligned memory, so we do not have to check the alignment */
-	if ((lp->init_block =
-	     pci_alloc_consistent(pdev, sizeof(*lp->init_block), &lp->init_dma_addr)) == NULL) {
+	lp->init_block = pci_alloc_consistent(pdev, sizeof(*lp->init_block),
+					      &lp->init_dma_addr);
+	if (!lp->init_block) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
 			pr_err("Consistent memory allocation failed\n");
 		ret = -ENOMEM;
@@ -1890,9 +1885,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 					id1, id2, i);
 		}
 		lp->a.write_bcr(ioaddr, 33, (lp->mii_if.phy_id) << 5);
-		if (lp->phycount > 1) {
+		if (lp->phycount > 1)
 			lp->options |= PCNET32_PORT_MII;
-		}
 	}
 
 	init_timer(&lp->watchdog_timer);
@@ -2236,7 +2230,7 @@ static int pcnet32_open(struct net_device *dev)
 
 	return 0;		/* Always succeed */
 
-      err_free_ring:
+err_free_ring:
 	/* free any allocated skbuffs */
 	pcnet32_purge_rx_ring(dev);
 
@@ -2246,7 +2240,7 @@ static int pcnet32_open(struct net_device *dev)
 	 */
 	lp->a.write_bcr(ioaddr, 20, 4);
 
-      err_free_irq:
+err_free_irq:
 	spin_unlock_irqrestore(&lp->lock, flags);
 	free_irq(dev->irq, dev);
 	return rc;
@@ -2297,10 +2291,10 @@ static int pcnet32_init_ring(struct net_device *dev)
 	for (i = 0; i < lp->rx_ring_size; i++) {
 		struct sk_buff *rx_skbuff = lp->rx_skbuff[i];
 		if (rx_skbuff == NULL) {
-			if (!
-			    (rx_skbuff = lp->rx_skbuff[i] =
-			     dev_alloc_skb(PKT_BUF_SKB))) {
-				/* there is not much, we can do at this point */
+			lp->rx_skbuff[i] = dev_alloc_skb(PKT_BUF_SKB);
+			rx_skbuff = lp->rx_skbuff[i];
+			if (!rx_skbuff) {
+				/* there is not much we can do at this point */
 				netif_err(lp, drv, dev, "%s dev_alloc_skb failed\n",
 					  __func__);
 				return -1;
@@ -2482,9 +2476,8 @@ pcnet32_interrupt(int irq, void *dev_id)
 
 	csr0 = lp->a.read_csr(ioaddr, CSR0);
 	while ((csr0 & 0x8f00) && --boguscnt >= 0) {
-		if (csr0 == 0xffff) {
+		if (csr0 == 0xffff)
 			break;	/* PCMCIA remove happened */
-		}
 		/* Acknowledge all of the current interrupt sources ASAP. */
 		lp->a.write_csr(ioaddr, CSR0, csr0 & ~0x004f);
 
-- 
cgit v1.2.3


From e06d41d09f314a1664ad60e46934b0ac131c6fa2 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 15 Feb 2010 14:32:50 +0000
Subject: netdev: bfin_mac: drop experimental markings on RMII support

The code has been around for a long time now and is known to work on a
bunch of different parts/boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b711d5416100..069057796bd7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -880,8 +880,8 @@ config BFIN_RX_DESC_NUM
 	  Set the number of buffer packets used in driver.
 
 config BFIN_MAC_RMII
-	bool "RMII PHY Interface (EXPERIMENTAL)"
-	depends on BFIN_MAC && EXPERIMENTAL
+	bool "RMII PHY Interface"
+	depends on BFIN_MAC
 	default y if BFIN527_EZKIT
 	default n if BFIN537_STAMP
 	help
-- 
cgit v1.2.3


From 47d742752df4c1088589d4424840bc761613ab2a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 16 Feb 2010 15:21:08 +0000
Subject: percpu: add __percpu sparse annotations to net drivers

Add __percpu sparse annotations to net drivers.

These annotations are to make sparse consider percpu variables to be
in a different address space and warn if accessed without going
through percpu accessors.  This patch doesn't affect normal builds.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/chelsio/sge.c  |  2 +-
 drivers/net/loopback.c     | 16 +++++++++-------
 drivers/net/veth.c         |  4 ++--
 include/linux/if_macvlan.h |  2 +-
 4 files changed, 13 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 109d2783e4d8..8e12505ac3aa 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -267,7 +267,7 @@ struct sge {
 	struct sk_buff	*espibug_skb[MAX_NPORTS];
 	u32		sge_control;	/* shadow value of sge control reg */
 	struct sge_intr_counts stats;
-	struct sge_port_stats *port_stats[MAX_NPORTS];
+	struct sge_port_stats __percpu *port_stats[MAX_NPORTS];
 	struct sched	*tx_sched;
 	struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
 };
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index b9fcc9819837..72b7949c91b1 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -72,7 +72,8 @@ struct pcpu_lstats {
 static netdev_tx_t loopback_xmit(struct sk_buff *skb,
 				 struct net_device *dev)
 {
-	struct pcpu_lstats *pcpu_lstats, *lb_stats;
+	struct pcpu_lstats __percpu *pcpu_lstats;
+	struct pcpu_lstats *lb_stats;
 	int len;
 
 	skb_orphan(skb);
@@ -80,7 +81,7 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb,
 	skb->protocol = eth_type_trans(skb, dev);
 
 	/* it's OK to use per_cpu_ptr() because BHs are off */
-	pcpu_lstats = dev->ml_priv;
+	pcpu_lstats = (void __percpu __force *)dev->ml_priv;
 	lb_stats = this_cpu_ptr(pcpu_lstats);
 
 	len = skb->len;
@@ -95,14 +96,14 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb,
 
 static struct net_device_stats *loopback_get_stats(struct net_device *dev)
 {
-	const struct pcpu_lstats *pcpu_lstats;
+	const struct pcpu_lstats __percpu *pcpu_lstats;
 	struct net_device_stats *stats = &dev->stats;
 	unsigned long bytes = 0;
 	unsigned long packets = 0;
 	unsigned long drops = 0;
 	int i;
 
-	pcpu_lstats = dev->ml_priv;
+	pcpu_lstats = (void __percpu __force *)dev->ml_priv;
 	for_each_possible_cpu(i) {
 		const struct pcpu_lstats *lb_stats;
 
@@ -135,19 +136,20 @@ static const struct ethtool_ops loopback_ethtool_ops = {
 
 static int loopback_dev_init(struct net_device *dev)
 {
-	struct pcpu_lstats *lstats;
+	struct pcpu_lstats __percpu *lstats;
 
 	lstats = alloc_percpu(struct pcpu_lstats);
 	if (!lstats)
 		return -ENOMEM;
 
-	dev->ml_priv = lstats;
+	dev->ml_priv = (void __force *)lstats;
 	return 0;
 }
 
 static void loopback_dev_free(struct net_device *dev)
 {
-	struct pcpu_lstats *lstats = dev->ml_priv;
+	struct pcpu_lstats __percpu *lstats =
+		(void __percpu __force *)dev->ml_priv;
 
 	free_percpu(lstats);
 	free_netdev(dev);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 3a15de56df9c..35609e64f6fd 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -34,7 +34,7 @@ struct veth_net_stats {
 
 struct veth_priv {
 	struct net_device *peer;
-	struct veth_net_stats *stats;
+	struct veth_net_stats __percpu *stats;
 	unsigned ip_summed;
 };
 
@@ -263,7 +263,7 @@ static int veth_change_mtu(struct net_device *dev, int new_mtu)
 
 static int veth_dev_init(struct net_device *dev)
 {
-	struct veth_net_stats *stats;
+	struct veth_net_stats __percpu *stats;
 	struct veth_priv *priv;
 
 	stats = alloc_percpu(struct veth_net_stats);
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 51f1512045e9..f9cb9ba1475d 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -30,7 +30,7 @@ struct macvlan_dev {
 	struct hlist_node	hlist;
 	struct macvlan_port	*port;
 	struct net_device	*lowerdev;
-	struct macvlan_rx_stats *rx_stats;
+	struct macvlan_rx_stats __percpu *rx_stats;
 	enum macvlan_mode	mode;
 	int (*receive)(struct sk_buff *skb);
 	int (*forward)(struct net_device *dev, struct sk_buff *skb);
-- 
cgit v1.2.3


From f6ca057f1bfe251d944505fc5ba4df3762802539 Mon Sep 17 00:00:00 2001
From: Jochen Friedrich <jochen@scram.de>
Date: Fri, 12 Feb 2010 10:11:54 +0000
Subject: b44: Ratelimit timeout error message.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/b44.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 9091c6574b1c..f21cbe63c7b1 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -189,11 +189,13 @@ static int b44_wait_bit(struct b44 *bp, unsigned long reg,
 		udelay(10);
 	}
 	if (i == timeout) {
-		printk(KERN_ERR PFX "%s: BUG!  Timeout waiting for bit %08x of register "
-		       "%lx to %s.\n",
-		       bp->dev->name,
-		       bit, reg,
-		       (clear ? "clear" : "set"));
+		if (net_ratelimit())
+			printk(KERN_ERR PFX "%s: BUG!  Timeout waiting for bit "
+			       "%08x of register "
+			       "%lx to %s.\n",
+			       bp->dev->name,
+			       bit, reg,
+			       (clear ? "clear" : "set"));
 		return -ENODEV;
 	}
 	return 0;
-- 
cgit v1.2.3


From 26b39276ca5ff4dbf3c07704e34fd820fd97decf Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Wed, 17 Feb 2010 01:00:41 +0000
Subject: igb: remove unecessary q_vector declarations and remove itr_shift

This change removes the use of itr_shift since a mac type call can be
used just as easily to identify the only HW that needs to have the itr
shifted.

In addition it removes two unecessary declarations of a q_vector
pointer from the initialization path.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb.h      |  1 -
 drivers/net/igb/igb_main.c | 25 +++++++++++++------------
 2 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 83ea11701f45..0efd28515e6e 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -176,7 +176,6 @@ struct igb_q_vector {
 
 	u16 itr_val;
 	u8 set_itr;
-	u8 itr_shift;
 	void __iomem *itr_register;
 
 	char name[IFNAMSIZ + 9];
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 4fe7b0ba6310..677b5f5ab49c 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -504,6 +504,12 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
 		BUG();
 		break;
 	}
+
+	/* add q_vector eims value to global eims_enable_mask */
+	adapter->eims_enable_mask |= q_vector->eims_value;
+
+	/* configure q_vector to set itr on first interrupt */
+	q_vector->set_itr = 1;
 }
 
 /**
@@ -561,11 +567,8 @@ static void igb_configure_msix(struct igb_adapter *adapter)
 
 	adapter->eims_enable_mask |= adapter->eims_other;
 
-	for (i = 0; i < adapter->num_q_vectors; i++) {
-		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		igb_assign_vector(q_vector, vector++);
-		adapter->eims_enable_mask |= q_vector->eims_value;
-	}
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		igb_assign_vector(adapter->q_vector[i], vector++);
 
 	wrfl();
 }
@@ -756,10 +759,8 @@ static int igb_alloc_q_vectors(struct igb_adapter *adapter)
 		if (!q_vector)
 			goto err_out;
 		q_vector->adapter = adapter;
-		q_vector->itr_shift = (hw->mac.type == e1000_82575) ? 16 : 0;
 		q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
 		q_vector->itr_val = IGB_START_ITR;
-		q_vector->set_itr = 1;
 		netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
 		adapter->q_vector[v_idx] = q_vector;
 	}
@@ -4142,6 +4143,7 @@ static irqreturn_t igb_msix_other(int irq, void *data)
 
 static void igb_write_itr(struct igb_q_vector *q_vector)
 {
+	struct igb_adapter *adapter = q_vector->adapter;
 	u32 itr_val = q_vector->itr_val & 0x7FFC;
 
 	if (!q_vector->set_itr)
@@ -4150,8 +4152,8 @@ static void igb_write_itr(struct igb_q_vector *q_vector)
 	if (!itr_val)
 		itr_val = 0x4;
 
-	if (q_vector->itr_shift)
-		itr_val |= itr_val << q_vector->itr_shift;
+	if (adapter->hw.mac.type == e1000_82575)
+		itr_val |= itr_val << 16;
 	else
 		itr_val |= 0x8000000;
 
@@ -4228,9 +4230,8 @@ static void igb_setup_dca(struct igb_adapter *adapter)
 	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 
 	for (i = 0; i < adapter->num_q_vectors; i++) {
-		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		q_vector->cpu = -1;
-		igb_update_dca(q_vector);
+		adapter->q_vector[i]->cpu = -1;
+		igb_update_dca(adapter->q_vector[i]);
 	}
 }
 
-- 
cgit v1.2.3


From 22939f0606e515799d83e1a29250917f94c8d07b Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:01:01 +0000
Subject: igb: add support for wake-on-link

This adds support for wake-on-link/phy activity to the ethtool
interface.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_ethtool.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index f771a6c08777..145a8eb55fab 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1812,7 +1812,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct igb_adapter *adapter = netdev_priv(netdev);
 
 	wol->supported = WAKE_UCAST | WAKE_MCAST |
-			 WAKE_BCAST | WAKE_MAGIC;
+	                 WAKE_BCAST | WAKE_MAGIC |
+	                 WAKE_PHY;
 	wol->wolopts = 0;
 
 	/* this function will set ->supported = 0 and return 1 if wol is not
@@ -1835,15 +1836,15 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 		wol->wolopts |= WAKE_BCAST;
 	if (adapter->wol & E1000_WUFC_MAG)
 		wol->wolopts |= WAKE_MAGIC;
-
-	return;
+	if (adapter->wol & E1000_WUFC_LNKC)
+		wol->wolopts |= WAKE_PHY;
 }
 
 static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 
-	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
 		return -EOPNOTSUPP;
 
 	if (igb_wol_exclusion(adapter, wol) ||
@@ -1861,6 +1862,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 		adapter->wol |= E1000_WUFC_BC;
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= E1000_WUFC_MAG;
+	if (wol->wolopts & WAKE_PHY)
+		adapter->wol |= E1000_WUFC_LNKC;
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	return 0;
-- 
cgit v1.2.3


From 3145535ac6e4769e587a38a67d888a10f24a7af9 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:01:21 +0000
Subject: igb: Report link status in ethtool when interface is down

With this change ethtool will correctly report link status when
the interface is down. Currently ethtool reports the link as not
detected when the interface is down.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb.h         |  1 +
 drivers/net/igb/igb_ethtool.c | 20 +++++++++++++++++++-
 drivers/net/igb/igb_main.c    |  2 +-
 3 files changed, 21 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 0efd28515e6e..452a4dee87f8 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -356,6 +356,7 @@ extern void igb_unmap_and_free_tx_resource(struct igb_ring *,
 					   struct igb_buffer *);
 extern void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
 extern void igb_update_stats(struct igb_adapter *);
+extern bool igb_has_link(struct igb_adapter *adapter);
 extern void igb_set_ethtool_ops(struct net_device *);
 
 static inline s32 igb_reset_phy(struct e1000_hw *hw)
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 145a8eb55fab..4eea03b428c4 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -234,6 +234,24 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	return 0;
 }
 
+static u32 igb_get_link(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	/*
+	 * If the link is not reported up to netdev, interrupts are disabled,
+	 * and so the physical link state may have changed since we last
+	 * looked. Set get_link_status to make sure that the true link
+	 * state is interrogated, rather than pulling a cached and possibly
+	 * stale link state from the driver.
+	 */
+	if (!netif_carrier_ok(netdev))
+		mac->get_link_status = 1;
+
+	return igb_has_link(adapter);
+}
+
 static void igb_get_pauseparam(struct net_device *netdev,
 			       struct ethtool_pauseparam *pause)
 {
@@ -2077,7 +2095,7 @@ static const struct ethtool_ops igb_ethtool_ops = {
 	.get_msglevel           = igb_get_msglevel,
 	.set_msglevel           = igb_set_msglevel,
 	.nway_reset             = igb_nway_reset,
-	.get_link               = ethtool_op_get_link,
+	.get_link               = igb_get_link,
 	.get_eeprom_len         = igb_get_eeprom_len,
 	.get_eeprom             = igb_get_eeprom,
 	.set_eeprom             = igb_set_eeprom,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 677b5f5ab49c..e40319e2ec25 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3020,7 +3020,7 @@ static void igb_update_phy_info(unsigned long data)
  * igb_has_link - check shared code for link and determine up/down
  * @adapter: pointer to driver private info
  **/
-static bool igb_has_link(struct igb_adapter *adapter)
+bool igb_has_link(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	bool link_active = false;
-- 
cgit v1.2.3


From 53c992fa8497286f24f279ebec5a8c7a58d4e68c Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:01:40 +0000
Subject: igb: ignore EEPROM APME check when shutting down serdes link

Checking the EEPROM APME state unnecessarily prevents the link from
shutting down. The standard power down routines should be
sufficient to determine whether the serdes link can power down
when going into D3.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/e1000_82575.c | 21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index c505b50d1fa3..59817bcc7169 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -791,27 +791,12 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
 void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
 {
 	u32 reg;
-	u16 eeprom_data = 0;
 
-	if (hw->phy.media_type != e1000_media_type_internal_serdes ||
+	if (hw->phy.media_type != e1000_media_type_internal_serdes &&
 	    igb_sgmii_active_82575(hw))
 		return;
 
-	if (hw->bus.func == E1000_FUNC_0)
-		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
-	else if (hw->mac.type == e1000_82580)
-		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
-		                 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
-		                 &eeprom_data);
-	else if (hw->bus.func == E1000_FUNC_1)
-		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
-
-	/*
-	 * If APM is not enabled in the EEPROM and management interface is
-	 * not enabled, then power down.
-	 */
-	if (!(eeprom_data & E1000_NVM_APME_82575) &&
-	    !igb_enable_mng_pass_thru(hw)) {
+	if (!igb_enable_mng_pass_thru(hw)) {
 		/* Disable PCS to turn off link */
 		reg = rd32(E1000_PCS_CFG0);
 		reg &= ~E1000_PCS_CFG_PCS_EN;
@@ -826,8 +811,6 @@ void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
 		wrfl();
 		msleep(1);
 	}
-
-	return;
 }
 
 /**
-- 
cgit v1.2.3


From 88a268c1a11a2e94b7c55a8cfe97892d845887c8 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:01:59 +0000
Subject: igb: Power down link when interface is down

This changes the behavior of the driver to power down the link
when the associated interface is down, unless management is enabled.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/e1000_82575.c   | 44 +++++++++++++++++++++++++++++++++++++++++
 drivers/net/igb/e1000_82575.h   |  2 ++
 drivers/net/igb/e1000_defines.h |  1 +
 drivers/net/igb/e1000_phy.c     | 35 ++++++++++++++++++++++++++++++++
 drivers/net/igb/e1000_phy.h     |  2 ++
 drivers/net/igb/igb.h           |  1 +
 drivers/net/igb/igb_ethtool.c   | 16 ++++++++++++---
 drivers/net/igb/igb_main.c      | 39 ++++++++++++++++++++++++++++--------
 8 files changed, 129 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 59817bcc7169..9d7fa2fb85ea 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -726,6 +726,34 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
 	return ret_val;
 }
 
+/**
+ *  igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ *  @hw: pointer to the HW structure
+ **/
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+	u32 reg;
+
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !igb_sgmii_active_82575(hw))
+		return;
+
+	/* Enable PCS to turn on link */
+	reg = rd32(E1000_PCS_CFG0);
+	reg |= E1000_PCS_CFG_PCS_EN;
+	wr32(E1000_PCS_CFG0, reg);
+
+	/* Power up the laser */
+	reg = rd32(E1000_CTRL_EXT);
+	reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+	wr32(E1000_CTRL_EXT, reg);
+
+	/* flush the write to verify completion */
+	wrfl();
+	msleep(1);
+}
+
 /**
  *  igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
@@ -1165,6 +1193,22 @@ out:
 	return ret_val;
 }
 
+/**
+ * igb_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
+		igb_power_down_phy_copper(hw);
+
+	return;
+}
+
 /**
  *  igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index bb53083ec61f..fbe1c99c193c 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -29,6 +29,8 @@
 #define _E1000_82575_H_
 
 extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
 
 #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index 6e036ae3138f..c01715070764 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -481,6 +481,7 @@
 /* PHY Control Register */
 #define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
 #define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN       0x0800  /* Power down */
 #define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
 #define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
 #define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index 3670a66401b8..cf1f32300923 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1930,6 +1930,41 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
 	return 0;
 }
 
+/**
+ * igb_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, restore the link to previous settings.
+ **/
+void igb_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * igb_power_down_phy_copper - Power down copper PHY
+ * @hw: pointer to the HW structure
+ *
+ * Power down PHY to save power when interface is down and wake on lan
+ * is not enabled.
+ **/
+void igb_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+	msleep(1);
+}
+
 /**
  *  igb_check_polarity_82580 - Checks the polarity.
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
index 555eb54bb6ed..565a6dbb3714 100644
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/igb/e1000_phy.h
@@ -60,6 +60,8 @@ s32  igb_setup_copper_link(struct e1000_hw *hw);
 s32  igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
 				u32 usec_interval, bool *success);
+void igb_power_up_phy_copper(struct e1000_hw *hw);
+void igb_power_down_phy_copper(struct e1000_hw *hw);
 s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
 s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 452a4dee87f8..0e0800dc801d 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -358,6 +358,7 @@ extern void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
 extern void igb_update_stats(struct igb_adapter *);
 extern bool igb_has_link(struct igb_adapter *adapter);
 extern void igb_set_ethtool_ops(struct net_device *);
+extern void igb_power_up_link(struct igb_adapter *);
 
 static inline s32 igb_reset_phy(struct e1000_hw *hw)
 {
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 4eea03b428c4..485288303f32 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1722,6 +1722,9 @@ static void igb_diag_test(struct net_device *netdev,
 
 		dev_info(&adapter->pdev->dev, "offline testing starting\n");
 
+		/* power up link for link test */
+		igb_power_up_link(adapter);
+
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result */
 		if (igb_link_test(adapter, &data[4]))
@@ -1745,6 +1748,8 @@ static void igb_diag_test(struct net_device *netdev,
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		igb_reset(adapter);
+		/* power up link for loopback test */
+		igb_power_up_link(adapter);
 		if (igb_loopback_test(adapter, &data[3]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1763,9 +1768,14 @@ static void igb_diag_test(struct net_device *netdev,
 			dev_open(netdev);
 	} else {
 		dev_info(&adapter->pdev->dev, "online testing starting\n");
-		/* Online tests */
-		if (igb_link_test(adapter, &data[4]))
-			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* PHY is powered down when interface is down */
+		if (!netif_carrier_ok(netdev)) {
+			data[4] = 0;
+		} else {
+			if (igb_link_test(adapter, &data[4]))
+				eth_test->flags |= ETH_TEST_FL_FAILED;
+		}
 
 		/* Online tests aren't run; pass by default */
 		data[0] = 0;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e40319e2ec25..0427e7c10295 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1114,6 +1114,29 @@ static void igb_configure(struct igb_adapter *adapter)
 	adapter->tx_queue_len = netdev->tx_queue_len;
 }
 
+/**
+ * igb_power_up_link - Power up the phy/serdes link
+ * @adapter: address of board private structure
+ **/
+void igb_power_up_link(struct igb_adapter *adapter)
+{
+	if (adapter->hw.phy.media_type == e1000_media_type_copper)
+		igb_power_up_phy_copper(&adapter->hw);
+	else
+		igb_power_up_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * igb_power_down_link - Power down the phy/serdes link
+ * @adapter: address of board private structure
+ */
+static void igb_power_down_link(struct igb_adapter *adapter)
+{
+	if (adapter->hw.phy.media_type == e1000_media_type_copper)
+		igb_power_down_phy_copper_82575(&adapter->hw);
+	else
+		igb_shutdown_serdes_link_82575(&adapter->hw);
+}
 
 /**
  * igb_up - Open the interface and prepare it to handle traffic
@@ -1335,6 +1358,9 @@ void igb_reset(struct igb_adapter *adapter)
 		wr32(E1000_PCIEMISC,
 		                reg & ~E1000_PCIEMISC_LX_DECISION);
 	}
+	if (!netif_running(adapter->netdev))
+		igb_power_down_link(adapter);
+
 	igb_update_mng_vlan(adapter);
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
@@ -1717,9 +1743,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	unregister_netdev(netdev);
 
-	if (!igb_check_reset_block(hw))
-		igb_reset_phy(hw);
-
 	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PCI_IOV
@@ -1995,7 +2018,7 @@ static int igb_open(struct net_device *netdev)
 	if (err)
 		goto err_setup_rx;
 
-	/* e1000_power_up_phy(adapter); */
+	igb_power_up_link(adapter);
 
 	/* before we allocate an interrupt, we must be ready to handle it.
 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
@@ -2037,7 +2060,7 @@ static int igb_open(struct net_device *netdev)
 
 err_req_irq:
 	igb_release_hw_control(adapter);
-	/* e1000_power_down_phy(adapter); */
+	igb_power_down_link(adapter);
 	igb_free_all_rx_resources(adapter);
 err_setup_rx:
 	igb_free_all_tx_resources(adapter);
@@ -5820,7 +5843,9 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
 
 	*enable_wake = wufc || adapter->en_mng_pt;
 	if (!*enable_wake)
-		igb_shutdown_serdes_link_82575(hw);
+		igb_power_down_link(adapter);
+	else
+		igb_power_up_link(adapter);
 
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
@@ -5877,8 +5902,6 @@ static int igb_resume(struct pci_dev *pdev)
 		return -ENOMEM;
 	}
 
-	/* e1000_power_up_phy(adapter); */
-
 	igb_reset(adapter);
 
 	/* let the f/w know that the h/w is now under the control of the
-- 
cgit v1.2.3


From b94f2d775a71ed09dc8ca2bf24c611bdce9e82e7 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:02:19 +0000
Subject: igb: call pci_save_state after pci_restore_state

This patch adds calls to pci_save_state() immediately after
calls to pci_restore_state(). Due to a change in the behavior
of pci_restore_state() it is necessary to call pci_save_state()
to keep the state_saved flag. This patch is based on a similar
patch for ixgbe.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 0427e7c10295..089a7c3f4c69 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -5885,6 +5885,7 @@ static int igb_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
+	pci_save_state(pdev);
 
 	err = pci_enable_device_mem(pdev);
 	if (err) {
@@ -6010,6 +6011,7 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
 	} else {
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
+		pci_save_state(pdev);
 
 		pci_enable_wake(pdev, PCI_D3hot, 0);
 		pci_enable_wake(pdev, PCI_D3cold, 0);
-- 
cgit v1.2.3


From 3025a446b6d0255ae4399ca5f9b259bd1b51539e Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Wed, 17 Feb 2010 01:02:39 +0000
Subject: igb: Allocate rings seperately instead of as a block

This change makes it so that the rings are allocated seperately.  As a
result we can allocate them on seperate nodes at some point in the future
if we so desire.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb.h         |   5 +-
 drivers/net/igb/igb_ethtool.c |  46 +++++++++--------
 drivers/net/igb/igb_main.c    | 113 +++++++++++++++++++++---------------------
 3 files changed, 83 insertions(+), 81 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 0e0800dc801d..8f07bc0a1d4c 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -240,7 +240,6 @@ static inline int igb_desc_unused(struct igb_ring *ring)
 }
 
 /* board specific private data structure */
-
 struct igb_adapter {
 	struct timer_list watchdog_timer;
 	struct timer_list phy_info_timer;
@@ -266,12 +265,12 @@ struct igb_adapter {
 	unsigned long led_status;
 
 	/* TX */
-	struct igb_ring *tx_ring;      /* One per active queue */
+	struct igb_ring *tx_ring[16];
 	unsigned long tx_queue_len;
 	u32 tx_timeout_count;
 
 	/* RX */
-	struct igb_ring *rx_ring;      /* One per active queue */
+	struct igb_ring *rx_ring[16];
 	int num_tx_queues;
 	int num_rx_queues;
 
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 485288303f32..a4cead12fd98 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -314,7 +314,7 @@ static int igb_set_pauseparam(struct net_device *netdev,
 static u32 igb_get_rx_csum(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	return !!(adapter->rx_ring[0].flags & IGB_RING_FLAG_RX_CSUM);
+	return !!(adapter->rx_ring[0]->flags & IGB_RING_FLAG_RX_CSUM);
 }
 
 static int igb_set_rx_csum(struct net_device *netdev, u32 data)
@@ -324,9 +324,9 @@ static int igb_set_rx_csum(struct net_device *netdev, u32 data)
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		if (data)
-			adapter->rx_ring[i].flags |= IGB_RING_FLAG_RX_CSUM;
+			adapter->rx_ring[i]->flags |= IGB_RING_FLAG_RX_CSUM;
 		else
-			adapter->rx_ring[i].flags &= ~IGB_RING_FLAG_RX_CSUM;
+			adapter->rx_ring[i]->flags &= ~IGB_RING_FLAG_RX_CSUM;
 	}
 
 	return 0;
@@ -789,9 +789,9 @@ static int igb_set_ringparam(struct net_device *netdev,
 
 	if (!netif_running(adapter->netdev)) {
 		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].count = new_tx_count;
+			adapter->tx_ring[i]->count = new_tx_count;
 		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].count = new_rx_count;
+			adapter->rx_ring[i]->count = new_rx_count;
 		adapter->tx_ring_count = new_tx_count;
 		adapter->rx_ring_count = new_rx_count;
 		goto clear_reset;
@@ -815,10 +815,10 @@ static int igb_set_ringparam(struct net_device *netdev,
 	 * to the tx and rx ring structs.
 	 */
 	if (new_tx_count != adapter->tx_ring_count) {
-		memcpy(temp_ring, adapter->tx_ring,
-		       adapter->num_tx_queues * sizeof(struct igb_ring));
-
 		for (i = 0; i < adapter->num_tx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->tx_ring[i],
+			       sizeof(struct igb_ring));
+
 			temp_ring[i].count = new_tx_count;
 			err = igb_setup_tx_resources(&temp_ring[i]);
 			if (err) {
@@ -830,20 +830,21 @@ static int igb_set_ringparam(struct net_device *netdev,
 			}
 		}
 
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			igb_free_tx_resources(&adapter->tx_ring[i]);
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			igb_free_tx_resources(adapter->tx_ring[i]);
 
-		memcpy(adapter->tx_ring, temp_ring,
-		       adapter->num_tx_queues * sizeof(struct igb_ring));
+			memcpy(adapter->tx_ring[i], &temp_ring[i],
+			       sizeof(struct igb_ring));
+		}
 
 		adapter->tx_ring_count = new_tx_count;
 	}
 
-	if (new_rx_count != adapter->rx_ring->count) {
-		memcpy(temp_ring, adapter->rx_ring,
-		       adapter->num_rx_queues * sizeof(struct igb_ring));
-
+	if (new_rx_count != adapter->rx_ring_count) {
 		for (i = 0; i < adapter->num_rx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->rx_ring[i],
+			       sizeof(struct igb_ring));
+
 			temp_ring[i].count = new_rx_count;
 			err = igb_setup_rx_resources(&temp_ring[i]);
 			if (err) {
@@ -856,11 +857,12 @@ static int igb_set_ringparam(struct net_device *netdev,
 
 		}
 
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			igb_free_rx_resources(&adapter->rx_ring[i]);
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			igb_free_rx_resources(adapter->rx_ring[i]);
 
-		memcpy(adapter->rx_ring, temp_ring,
-		       adapter->num_rx_queues * sizeof(struct igb_ring));
+			memcpy(adapter->rx_ring[i], &temp_ring[i],
+			       sizeof(struct igb_ring));
+		}
 
 		adapter->rx_ring_count = new_rx_count;
 	}
@@ -2036,12 +2038,12 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
 	for (j = 0; j < adapter->num_tx_queues; j++) {
-		queue_stat = (u64 *)&adapter->tx_ring[j].tx_stats;
+		queue_stat = (u64 *)&adapter->tx_ring[j]->tx_stats;
 		for (k = 0; k < IGB_TX_QUEUE_STATS_LEN; k++, i++)
 			data[i] = queue_stat[k];
 	}
 	for (j = 0; j < adapter->num_rx_queues; j++) {
-		queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats;
+		queue_stat = (u64 *)&adapter->rx_ring[j]->rx_stats;
 		for (k = 0; k < IGB_RX_QUEUE_STATS_LEN; k++, i++)
 			data[i] = queue_stat[k];
 	}
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 089a7c3f4c69..30fb5a89c42d 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -318,31 +318,35 @@ static void igb_cache_ring_register(struct igb_adapter *adapter)
 		 */
 		if (adapter->vfs_allocated_count) {
 			for (; i < adapter->rss_queues; i++)
-				adapter->rx_ring[i].reg_idx = rbase_offset +
-				                              Q_IDX_82576(i);
+				adapter->rx_ring[i]->reg_idx = rbase_offset +
+				                               Q_IDX_82576(i);
 			for (; j < adapter->rss_queues; j++)
-				adapter->tx_ring[j].reg_idx = rbase_offset +
-				                              Q_IDX_82576(j);
+				adapter->tx_ring[j]->reg_idx = rbase_offset +
+				                               Q_IDX_82576(j);
 		}
 	case e1000_82575:
 	case e1000_82580:
 	default:
 		for (; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = rbase_offset + i;
+			adapter->rx_ring[i]->reg_idx = rbase_offset + i;
 		for (; j < adapter->num_tx_queues; j++)
-			adapter->tx_ring[j].reg_idx = rbase_offset + j;
+			adapter->tx_ring[j]->reg_idx = rbase_offset + j;
 		break;
 	}
 }
 
 static void igb_free_queues(struct igb_adapter *adapter)
 {
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
-
-	adapter->tx_ring = NULL;
-	adapter->rx_ring = NULL;
+	int i;
 
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		kfree(adapter->tx_ring[i]);
+		adapter->tx_ring[i] = NULL;
+	}
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		kfree(adapter->rx_ring[i]);
+		adapter->rx_ring[i] = NULL;
+	}
 	adapter->num_rx_queues = 0;
 	adapter->num_tx_queues = 0;
 }
@@ -356,20 +360,13 @@ static void igb_free_queues(struct igb_adapter *adapter)
  **/
 static int igb_alloc_queues(struct igb_adapter *adapter)
 {
+	struct igb_ring *ring;
 	int i;
 
-	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
-				   sizeof(struct igb_ring), GFP_KERNEL);
-	if (!adapter->tx_ring)
-		goto err;
-
-	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
-				   sizeof(struct igb_ring), GFP_KERNEL);
-	if (!adapter->rx_ring)
-		goto err;
-
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *ring = &(adapter->tx_ring[i]);
+		ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
+		if (!ring)
+			goto err;
 		ring->count = adapter->tx_ring_count;
 		ring->queue_index = i;
 		ring->pdev = adapter->pdev;
@@ -377,10 +374,13 @@ static int igb_alloc_queues(struct igb_adapter *adapter)
 		/* For 82575, context index must be unique per ring. */
 		if (adapter->hw.mac.type == e1000_82575)
 			ring->flags = IGB_RING_FLAG_TX_CTX_IDX;
+		adapter->tx_ring[i] = ring;
 	}
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *ring = &(adapter->rx_ring[i]);
+		ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
+		if (!ring)
+			goto err;
 		ring->count = adapter->rx_ring_count;
 		ring->queue_index = i;
 		ring->pdev = adapter->pdev;
@@ -390,6 +390,7 @@ static int igb_alloc_queues(struct igb_adapter *adapter)
 		/* set flag indicating ring supports SCTP checksum offload */
 		if (adapter->hw.mac.type >= e1000_82576)
 			ring->flags |= IGB_RING_FLAG_RX_SCTP_CSUM;
+		adapter->rx_ring[i] = ring;
 	}
 
 	igb_cache_ring_register(adapter);
@@ -780,10 +781,9 @@ err_out:
 static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
                                       int ring_idx, int v_idx)
 {
-	struct igb_q_vector *q_vector;
+	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
 
-	q_vector = adapter->q_vector[v_idx];
-	q_vector->rx_ring = &adapter->rx_ring[ring_idx];
+	q_vector->rx_ring = adapter->rx_ring[ring_idx];
 	q_vector->rx_ring->q_vector = q_vector;
 	q_vector->itr_val = adapter->rx_itr_setting;
 	if (q_vector->itr_val && q_vector->itr_val <= 3)
@@ -793,10 +793,9 @@ static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
 static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
                                       int ring_idx, int v_idx)
 {
-	struct igb_q_vector *q_vector;
+	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
 
-	q_vector = adapter->q_vector[v_idx];
-	q_vector->tx_ring = &adapter->tx_ring[ring_idx];
+	q_vector->tx_ring = adapter->tx_ring[ring_idx];
 	q_vector->tx_ring->q_vector = q_vector;
 	q_vector->itr_val = adapter->tx_itr_setting;
 	if (q_vector->itr_val && q_vector->itr_val <= 3)
@@ -1106,7 +1105,7 @@ static void igb_configure(struct igb_adapter *adapter)
 	 * at least 1 descriptor unused to make sure
 	 * next_to_use != next_to_clean */
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *ring = &adapter->rx_ring[i];
+		struct igb_ring *ring = adapter->rx_ring[i];
 		igb_alloc_rx_buffers_adv(ring, igb_desc_unused(ring));
 	}
 
@@ -2148,19 +2147,19 @@ static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
 	int i, err = 0;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		err = igb_setup_tx_resources(&adapter->tx_ring[i]);
+		err = igb_setup_tx_resources(adapter->tx_ring[i]);
 		if (err) {
 			dev_err(&pdev->dev,
 				"Allocation for Tx Queue %u failed\n", i);
 			for (i--; i >= 0; i--)
-				igb_free_tx_resources(&adapter->tx_ring[i]);
+				igb_free_tx_resources(adapter->tx_ring[i]);
 			break;
 		}
 	}
 
 	for (i = 0; i < IGB_ABS_MAX_TX_QUEUES; i++) {
 		int r_idx = i % adapter->num_tx_queues;
-		adapter->multi_tx_table[i] = &adapter->tx_ring[r_idx];
+		adapter->multi_tx_table[i] = adapter->tx_ring[r_idx];
 	}
 	return err;
 }
@@ -2243,7 +2242,7 @@ static void igb_configure_tx(struct igb_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		igb_configure_tx_ring(adapter, &adapter->tx_ring[i]);
+		igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
 }
 
 /**
@@ -2301,12 +2300,12 @@ static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
 	int i, err = 0;
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		err = igb_setup_rx_resources(&adapter->rx_ring[i]);
+		err = igb_setup_rx_resources(adapter->rx_ring[i]);
 		if (err) {
 			dev_err(&pdev->dev,
 				"Allocation for Rx Queue %u failed\n", i);
 			for (i--; i >= 0; i--)
-				igb_free_rx_resources(&adapter->rx_ring[i]);
+				igb_free_rx_resources(adapter->rx_ring[i]);
 			break;
 		}
 	}
@@ -2634,7 +2633,7 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 	/* Setup the HW Rx Head and Tail Descriptor Pointers and
 	 * the Base and Length of the Rx Descriptor Ring */
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		igb_configure_rx_ring(adapter, &adapter->rx_ring[i]);
+		igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
 }
 
 /**
@@ -2671,7 +2670,7 @@ static void igb_free_all_tx_resources(struct igb_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		igb_free_tx_resources(&adapter->tx_ring[i]);
+		igb_free_tx_resources(adapter->tx_ring[i]);
 }
 
 void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
@@ -2738,7 +2737,7 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		igb_clean_tx_ring(&adapter->tx_ring[i]);
+		igb_clean_tx_ring(adapter->tx_ring[i]);
 }
 
 /**
@@ -2775,7 +2774,7 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		igb_free_rx_resources(&adapter->rx_ring[i]);
+		igb_free_rx_resources(adapter->rx_ring[i]);
 }
 
 /**
@@ -2839,7 +2838,7 @@ static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		igb_clean_rx_ring(&adapter->rx_ring[i]);
+		igb_clean_rx_ring(adapter->rx_ring[i]);
 }
 
 /**
@@ -3163,7 +3162,7 @@ static void igb_watchdog_task(struct work_struct *work)
 	igb_update_adaptive(hw);
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *tx_ring = &adapter->tx_ring[i];
+		struct igb_ring *tx_ring = adapter->tx_ring[i];
 		if (!netif_carrier_ok(netdev)) {
 			/* We've lost link, so the controller stops DMA,
 			 * but we've got queued Tx work that's never going
@@ -3359,13 +3358,13 @@ static void igb_set_itr(struct igb_adapter *adapter)
 
 	adapter->rx_itr = igb_update_itr(adapter,
 				    adapter->rx_itr,
-				    adapter->rx_ring->total_packets,
-				    adapter->rx_ring->total_bytes);
+				    q_vector->rx_ring->total_packets,
+				    q_vector->rx_ring->total_bytes);
 
 	adapter->tx_itr = igb_update_itr(adapter,
 				    adapter->tx_itr,
-				    adapter->tx_ring->total_packets,
-				    adapter->tx_ring->total_bytes);
+				    q_vector->tx_ring->total_packets,
+				    q_vector->tx_ring->total_bytes);
 	current_itr = max(adapter->rx_itr, adapter->tx_itr);
 
 	/* conservative mode (itr 3) eliminates the lowest_latency setting */
@@ -3388,10 +3387,10 @@ static void igb_set_itr(struct igb_adapter *adapter)
 	}
 
 set_itr_now:
-	adapter->rx_ring->total_bytes = 0;
-	adapter->rx_ring->total_packets = 0;
-	adapter->tx_ring->total_bytes = 0;
-	adapter->tx_ring->total_packets = 0;
+	q_vector->rx_ring->total_bytes = 0;
+	q_vector->rx_ring->total_packets = 0;
+	q_vector->tx_ring->total_bytes = 0;
+	q_vector->tx_ring->total_packets = 0;
 
 	if (new_itr != q_vector->itr_val) {
 		/* this attempts to bias the interrupt rate towards Bulk
@@ -3950,7 +3949,7 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu)
 	netdev->mtu = new_mtu;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		adapter->rx_ring[i].rx_buffer_len = rx_buffer_len;
+		adapter->rx_ring[i]->rx_buffer_len = rx_buffer_len;
 
 	if (netif_running(netdev))
 		igb_up(adapter);
@@ -3992,10 +3991,11 @@ void igb_update_stats(struct igb_adapter *adapter)
 	packets = 0;
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
-		adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
+		struct igb_ring *ring = adapter->rx_ring[i];
+		ring->rx_stats.drops += rqdpc_tmp;
 		net_stats->rx_fifo_errors += rqdpc_tmp;
-		bytes += adapter->rx_ring[i].rx_stats.bytes;
-		packets += adapter->rx_ring[i].rx_stats.packets;
+		bytes += ring->rx_stats.bytes;
+		packets += ring->rx_stats.packets;
 	}
 
 	net_stats->rx_bytes = bytes;
@@ -4004,8 +4004,9 @@ void igb_update_stats(struct igb_adapter *adapter)
 	bytes = 0;
 	packets = 0;
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		bytes += adapter->tx_ring[i].tx_stats.bytes;
-		packets += adapter->tx_ring[i].tx_stats.packets;
+		struct igb_ring *ring = adapter->tx_ring[i];
+		bytes += ring->tx_stats.bytes;
+		packets += ring->tx_stats.packets;
 	}
 	net_stats->tx_bytes = bytes;
 	net_stats->tx_packets = packets;
-- 
cgit v1.2.3


From 2d0b0f693578109aff347e055d47f2797c802261 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:02:59 +0000
Subject: igb: remove adaptive IFS from driver

Adaptive IFS support has been included in the igb driver since its
initial release, but it is not a feature on any igb NICs. This patch
removes it from the driver.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/e1000_defines.h |  6 ----
 drivers/net/igb/e1000_hw.h      |  7 -----
 drivers/net/igb/e1000_mac.c     | 70 -----------------------------------------
 drivers/net/igb/e1000_mac.h     |  2 --
 drivers/net/igb/igb_main.c      | 10 ++----
 5 files changed, 2 insertions(+), 93 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index c01715070764..fe6cf1b696c7 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -313,12 +313,6 @@
 #define E1000_PBA_34K 0x0022
 #define E1000_PBA_64K 0x0040    /* 64KB */
 
-#define IFS_MAX       80
-#define IFS_MIN       40
-#define IFS_RATIO     4
-#define IFS_STEP      10
-#define MIN_NUM_XMITS 1000
-
 /* SW Semaphore Register */
 #define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */
 #define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index dbaeb5f5e0c7..448005276b26 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -339,19 +339,12 @@ struct e1000_mac_info {
 
 	enum e1000_mac_type type;
 
-	u32 collision_delta;
 	u32 ledctl_default;
 	u32 ledctl_mode1;
 	u32 ledctl_mode2;
 	u32 mc_filter_type;
-	u32 tx_packet_delta;
 	u32 txcw;
 
-	u16 current_ifs_val;
-	u16 ifs_max_val;
-	u16 ifs_min_val;
-	u16 ifs_ratio;
-	u16 ifs_step_size;
 	u16 mta_reg_count;
 	u16 uta_reg_count;
 
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 2ad358a240bf..2a8a886b37eb 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -1303,76 +1303,6 @@ out:
 	return ret_val;
 }
 
-/**
- *  igb_reset_adaptive - Reset Adaptive Interframe Spacing
- *  @hw: pointer to the HW structure
- *
- *  Reset the Adaptive Interframe Spacing throttle to default values.
- **/
-void igb_reset_adaptive(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-
-	if (!mac->adaptive_ifs) {
-		hw_dbg("Not in Adaptive IFS mode!\n");
-		goto out;
-	}
-
-	if (!mac->ifs_params_forced) {
-		mac->current_ifs_val = 0;
-		mac->ifs_min_val = IFS_MIN;
-		mac->ifs_max_val = IFS_MAX;
-		mac->ifs_step_size = IFS_STEP;
-		mac->ifs_ratio = IFS_RATIO;
-	}
-
-	mac->in_ifs_mode = false;
-	wr32(E1000_AIT, 0);
-out:
-	return;
-}
-
-/**
- *  igb_update_adaptive - Update Adaptive Interframe Spacing
- *  @hw: pointer to the HW structure
- *
- *  Update the Adaptive Interframe Spacing Throttle value based on the
- *  time between transmitted packets and time between collisions.
- **/
-void igb_update_adaptive(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-
-	if (!mac->adaptive_ifs) {
-		hw_dbg("Not in Adaptive IFS mode!\n");
-		goto out;
-	}
-
-	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
-		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
-			mac->in_ifs_mode = true;
-			if (mac->current_ifs_val < mac->ifs_max_val) {
-				if (!mac->current_ifs_val)
-					mac->current_ifs_val = mac->ifs_min_val;
-				else
-					mac->current_ifs_val +=
-						mac->ifs_step_size;
-				wr32(E1000_AIT,
-						mac->current_ifs_val);
-			}
-		}
-	} else {
-		if (mac->in_ifs_mode &&
-		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
-			mac->current_ifs_val = 0;
-			mac->in_ifs_mode = false;
-			wr32(E1000_AIT, 0);
-		}
-	}
-out:
-	return;
-}
-
 /**
  *  igb_validate_mdi_setting - Verify MDI/MDIx settings
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
index bca17d882417..601be99711c2 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/igb/e1000_mac.h
@@ -67,8 +67,6 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
 void igb_put_hw_semaphore(struct e1000_hw *hw);
 void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
 s32  igb_check_alt_mac_addr(struct e1000_hw *hw);
-void igb_reset_adaptive(struct e1000_hw *hw);
-void igb_update_adaptive(struct e1000_hw *hw);
 
 bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 30fb5a89c42d..eb48e1a084dd 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1365,7 +1365,6 @@ void igb_reset(struct igb_adapter *adapter)
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 	wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
 
-	igb_reset_adaptive(hw);
 	igb_get_phy_info(hw);
 }
 
@@ -1508,7 +1507,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	igb_get_bus_info_pcie(hw);
 
 	hw->phy.autoneg_wait_to_complete = false;
-	hw->mac.adaptive_ifs = true;
 
 	/* Copper options */
 	if (hw->phy.media_type == e1000_media_type_copper) {
@@ -3159,7 +3157,6 @@ static void igb_watchdog_task(struct work_struct *work)
 	}
 
 	igb_update_stats(adapter);
-	igb_update_adaptive(hw);
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		struct igb_ring *tx_ring = adapter->tx_ring[i];
@@ -4064,11 +4061,8 @@ void igb_update_stats(struct igb_adapter *adapter)
 	adapter->stats.mptc += rd32(E1000_MPTC);
 	adapter->stats.bptc += rd32(E1000_BPTC);
 
-	/* used for adaptive IFS */
-	hw->mac.tx_packet_delta = rd32(E1000_TPT);
-	adapter->stats.tpt += hw->mac.tx_packet_delta;
-	hw->mac.collision_delta = rd32(E1000_COLC);
-	adapter->stats.colc += hw->mac.collision_delta;
+	adapter->stats.tpt += rd32(E1000_TPT);
+	adapter->stats.colc += rd32(E1000_COLC);
 
 	adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
 	adapter->stats.rxerrc += rd32(E1000_RXERRC);
-- 
cgit v1.2.3


From abe1c3638ccf8b68536afb52b111f6ad46d1cf71 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:03:19 +0000
Subject: igb: cap interrupts at 20K per queue when in itr mode 3

In order to maintain similar performance between MSI-X and
legacy/MSI interrupts, this patch reduces the number of interrupts
when receiving small packets to 20K when in interrupt throttle
rate mode 3.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index eb48e1a084dd..4ccc7fc70f53 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3260,6 +3260,10 @@ static void igb_update_ring_itr(struct igb_q_vector *q_vector)
 	else
 		new_val = avg_wire_size / 2;
 
+	/* when in itr mode 3 do not exceed 20K ints/sec */
+	if (adapter->rx_itr_setting == 3 && new_val < 196)
+		new_val = 196;
+
 set_itr_val:
 	if (new_val != q_vector->itr_val) {
 		q_vector->itr_val = new_val;
-- 
cgit v1.2.3


From e6bdb6fefc590ad2fb5f79e1d1d3660afbc7c8ff Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:03:38 +0000
Subject: igb: only support SRRCTL_DROP_EN when using multiple queues

The SRRCTL.DROP_EN bit should only be set when we are supporting
multiple queues. This bit is meant to prevent head of line blocking
and is unnecessary in the single queue case.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 4ccc7fc70f53..b989b34a4adb 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2595,6 +2595,9 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
 		         E1000_SRRCTL_BSIZEPKT_SHIFT;
 		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
 	}
+	/* Only set Drop Enable if we are supporting multiple queues */
+	if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
+		srrctl |= E1000_SRRCTL_DROP_EN;
 
 	wr32(E1000_SRRCTL(reg_idx), srrctl);
 
-- 
cgit v1.2.3


From 43915c7c9a99e38406103d9c72b73edeaa19d0ff Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:03:58 +0000
Subject: igb: only read phy specific stats if in internal phy mode

There are a couple statistics registers that are not meant to
be read when in SGMII/serdes mode. This patch adds a check to
verify mode before reading and updating these statistics.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b989b34a4adb..cba0115a6a57 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3975,7 +3975,7 @@ void igb_update_stats(struct igb_adapter *adapter)
 	struct net_device_stats *net_stats = igb_get_stats(adapter->netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
-	u32 rnbc;
+	u32 rnbc, reg;
 	u16 phy_tmp;
 	int i;
 	u64 bytes, packets;
@@ -4072,8 +4072,13 @@ void igb_update_stats(struct igb_adapter *adapter)
 	adapter->stats.colc += rd32(E1000_COLC);
 
 	adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
-	adapter->stats.rxerrc += rd32(E1000_RXERRC);
-	adapter->stats.tncrs += rd32(E1000_TNCRS);
+	/* read internal phy specific stats */
+	reg = rd32(E1000_CTRL_EXT);
+	if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
+		adapter->stats.rxerrc += rd32(E1000_RXERRC);
+		adapter->stats.tncrs += rd32(E1000_TNCRS);
+	}
+
 	adapter->stats.tsctc += rd32(E1000_TSCTC);
 	adapter->stats.tsctfc += rd32(E1000_TSCTFC);
 
-- 
cgit v1.2.3


From 717ba0893508c2c8706c1408c152aa6d286d5d80 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:04:18 +0000
Subject: igb: inline igb_maybe_stop_tx

igb_maybe_stop_tx() is extremely small and appears in several spots in
the tx hotpath. This change inlines the function for a possible
performance boost.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index cba0115a6a57..a1fe581febc0 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3758,7 +3758,7 @@ static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
 	return 0;
 }
 
-static int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
+static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
 {
 	if (igb_desc_unused(tx_ring) >= size)
 		return 0;
-- 
cgit v1.2.3


From 40e90c26f573fa5082be6e046b346e19ab0cd25f Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:04:37 +0000
Subject: igb: move gso_segs into buffer_info structure

This change moves gso_segs into the buffer_info structure to avoid
a possible cache line miss in clean_tx_irq.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb.h      | 1 +
 drivers/net/igb/igb_main.c | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 8f07bc0a1d4c..7854b66648c7 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -141,6 +141,7 @@ struct igb_buffer {
 			u16 length;
 			u16 next_to_watch;
 			u16 mapped_as_page;
+			u16 gso_segs;
 		};
 		/* RX */
 		struct {
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index a1fe581febc0..91c123f9df92 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3641,6 +3641,7 @@ static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
+	tx_ring->buffer_info[i].gso_segs = skb_shinfo(skb)->gso_segs ?: 1;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
 	return ++count;
@@ -5032,7 +5033,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
 			if (skb) {
 				unsigned int segs, bytecount;
 				/* gso_segs is currently only valid for tcp */
-				segs = skb_shinfo(skb)->gso_segs ?: 1;
+				segs = buffer_info->gso_segs;
 				/* multiply data chunks by size of headers */
 				bytecount = ((segs - 1) * skb_headlen(skb)) +
 					    skb->len;
-- 
cgit v1.2.3


From 91d4ee3382e78bd78e0251a56e2fa96b20c26e30 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:04:56 +0000
Subject: igb: minor type cleanups

This change cleans up some instances where unsigned int and u32
were being used interchangeably, and cleans up hdr_len which
was being set to 0 twice.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 91c123f9df92..ff392e999ffc 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3434,8 +3434,8 @@ static inline int igb_tso_adv(struct igb_ring *tx_ring,
 	int err;
 	struct igb_buffer *buffer_info;
 	u32 info = 0, tu_cmd = 0;
-	u32 mss_l4len_idx, l4len;
-	*hdr_len = 0;
+	u32 mss_l4len_idx;
+	u8 l4len;
 
 	if (skb_header_cloned(skb)) {
 		err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
@@ -3671,7 +3671,7 @@ dma_error:
 }
 
 static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
-				    int tx_flags, int count, u32 paylen,
+				    u32 tx_flags, int count, u32 paylen,
 				    u8 hdr_len)
 {
 	union e1000_adv_tx_desc *tx_desc;
@@ -3770,10 +3770,10 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
 				    struct igb_ring *tx_ring)
 {
 	struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
-	unsigned int first;
-	unsigned int tx_flags = 0;
-	u8 hdr_len = 0;
 	int tso = 0, count;
+	u32 tx_flags = 0;
+	u16 first;
+	u8 hdr_len = 0;
 	union skb_shared_tx *shtx = skb_tx(skb);
 
 	/* need: 1 descriptor per page,
-- 
cgit v1.2.3


From d3eeb62ddd06ea20a054213cface92d328709285 Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:05:15 +0000
Subject: igb: remove unused vmolr value

In an earlier version of igb_write_mc_addr_list() the vmolr register
was modified. This register is no longer accessed, although the variable
still exists. This patch removes it from the function.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ff392e999ffc..a9f4e0288409 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2883,7 +2883,6 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 	struct e1000_hw *hw = &adapter->hw;
 	struct dev_mc_list *mc_ptr = netdev->mc_list;
 	u8  *mta_list;
-	u32 vmolr = 0;
 	int i;
 
 	if (netdev_mc_empty(netdev)) {
@@ -2897,9 +2896,6 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 	if (!mta_list)
 		return -ENOMEM;
 
-	/* set vmolr receive overflow multicast bit */
-	vmolr |= E1000_VMOLR_ROMPE;
-
 	/* The shared function expects a packed array of only addresses. */
 	mc_ptr = netdev->mc_list;
 
-- 
cgit v1.2.3


From fe0592b4be0ce362e87cefd4f6dbf12cb5704d1b Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:05:35 +0000
Subject: igb: use igb_free_q_vectors to cleanup failure in igb_alloc_q_vectors

This change makes it so that igb_free_q_vectors is reused in
igb_alloc_q_vectors to handle the cleanup instead of unwinding
through the allocations.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index a9f4e0288409..ab7c5e97ed02 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -649,6 +649,8 @@ static void igb_free_q_vectors(struct igb_adapter *adapter)
 	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
 		struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
 		adapter->q_vector[v_idx] = NULL;
+		if (!q_vector)
+			continue;
 		netif_napi_del(&q_vector->napi);
 		kfree(q_vector);
 	}
@@ -768,13 +770,7 @@ static int igb_alloc_q_vectors(struct igb_adapter *adapter)
 	return 0;
 
 err_out:
-	while (v_idx) {
-		v_idx--;
-		q_vector = adapter->q_vector[v_idx];
-		netif_napi_del(&q_vector->napi);
-		kfree(q_vector);
-		adapter->q_vector[v_idx] = NULL;
-	}
+	igb_free_q_vectors(adapter);
 	return -ENOMEM;
 }
 
-- 
cgit v1.2.3


From 58fd62f525e1182fbb2f7566aecb4545720d9aad Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:05:56 +0000
Subject: igb: change descriptor control thresholds

This change simplifies the code by setting RX_PTHRESH to 8 for
all devices, as it was unlikely that there was any advantage to
set it at 16 for earlier cards. Additionally TX_WTHRESH is
set to 1 for the 82576 NIC to improve performance by enabling
a minimal amount of write combining when writing back descriptors.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 7854b66648c7..a1775705b24c 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -95,13 +95,13 @@ struct vf_data_storage {
  *           descriptors until either it has this many to write back, or the
  *           ITR timer expires.
  */
-#define IGB_RX_PTHRESH                    (hw->mac.type <= e1000_82576 ? 16 : 8)
+#define IGB_RX_PTHRESH                     8
 #define IGB_RX_HTHRESH                     8
 #define IGB_RX_WTHRESH                     1
 #define IGB_TX_PTHRESH                     8
 #define IGB_TX_HTHRESH                     1
 #define IGB_TX_WTHRESH                     ((hw->mac.type == e1000_82576 && \
-                                             adapter->msix_entries) ? 0 : 16)
+                                             adapter->msix_entries) ? 1 : 16)
 
 /* this is the size past which hardware will drop packets when setting LPE=0 */
 #define MAXIMUM_ETHERNET_VLAN_SIZE 1522
-- 
cgit v1.2.3


From a77ff709dd30a263f8154b05a8514b46098b42ba Mon Sep 17 00:00:00 2001
From: Nick Nunley <nicholasx.d.nunley@intel.com>
Date: Wed, 17 Feb 2010 01:06:16 +0000
Subject: igb: update tx DMA mapping error handling

This updates the tx DMA mapping error handling code to
resemble e1000e/ixgbe.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ab7c5e97ed02..f588e49c65f1 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -3647,14 +3647,12 @@ dma_error:
 	buffer_info->length = 0;
 	buffer_info->next_to_watch = 0;
 	buffer_info->mapped_as_page = false;
-	count--;
 
 	/* clear timestamp and dma mappings for remaining portion of packet */
-	while (count >= 0) {
-		count--;
+	while (count--) {
+		if (i == 0)
+			i = tx_ring->count;
 		i--;
-		if (i < 0)
-			i += tx_ring->count;
 		buffer_info = &tx_ring->buffer_info[i];
 		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
 	}
-- 
cgit v1.2.3


From d7b855c2dcc89587f36338bd383203322efb9903 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 10:43:33 +0000
Subject: cassini: convert to use netdev_for_each_mc_addr

Introduced a new function to do the mc list processing, makes code
clearer after transition.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cassini.c | 72 +++++++++++++++++++++++++--------------------------
 1 file changed, 35 insertions(+), 37 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index ad47e5126fde..f90cac43130d 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -2999,6 +2999,40 @@ static inline void cas_init_dma(struct cas *cp)
 	cas_init_rx_dma(cp);
 }
 
+static void cas_process_mc_list(struct cas *cp)
+{
+	u16 hash_table[16];
+	u32 crc;
+	struct dev_mc_list *dmi;
+	int i = 1;
+
+	memset(hash_table, 0, sizeof(hash_table));
+	netdev_for_each_mc_addr(dmi, cp->dev) {
+		if (i <= CAS_MC_EXACT_MATCH_SIZE) {
+			/* use the alternate mac address registers for the
+			 * first 15 multicast addresses
+			 */
+			writel((dmi->dmi_addr[4] << 8) | dmi->dmi_addr[5],
+			       cp->regs + REG_MAC_ADDRN(i*3 + 0));
+			writel((dmi->dmi_addr[2] << 8) | dmi->dmi_addr[3],
+			       cp->regs + REG_MAC_ADDRN(i*3 + 1));
+			writel((dmi->dmi_addr[0] << 8) | dmi->dmi_addr[1],
+			       cp->regs + REG_MAC_ADDRN(i*3 + 2));
+			i++;
+		}
+		else {
+			/* use hw hash table for the next series of
+			 * multicast addresses
+			 */
+			crc = ether_crc_le(ETH_ALEN, dmi->dmi_addr);
+			crc >>= 24;
+			hash_table[crc >> 4] |= 1 << (15 - (crc & 0xf));
+		}
+	}
+	for (i = 0; i < 16; i++)
+		writel(hash_table[i], cp->regs + REG_MAC_HASH_TABLEN(i));
+}
+
 /* Must be invoked under cp->lock. */
 static u32 cas_setup_multicast(struct cas *cp)
 {
@@ -3014,43 +3048,7 @@ static u32 cas_setup_multicast(struct cas *cp)
 		rxcfg |= MAC_RX_CFG_HASH_FILTER_EN;
 
 	} else {
-		u16 hash_table[16];
-		u32 crc;
-		struct dev_mc_list *dmi = cp->dev->mc_list;
-		int i;
-
-		/* use the alternate mac address registers for the
-		 * first 15 multicast addresses
-		 */
-		for (i = 1; i <= CAS_MC_EXACT_MATCH_SIZE; i++) {
-			if (!dmi) {
-				writel(0x0, cp->regs + REG_MAC_ADDRN(i*3 + 0));
-				writel(0x0, cp->regs + REG_MAC_ADDRN(i*3 + 1));
-				writel(0x0, cp->regs + REG_MAC_ADDRN(i*3 + 2));
-				continue;
-			}
-			writel((dmi->dmi_addr[4] << 8) | dmi->dmi_addr[5],
-			       cp->regs + REG_MAC_ADDRN(i*3 + 0));
-			writel((dmi->dmi_addr[2] << 8) | dmi->dmi_addr[3],
-			       cp->regs + REG_MAC_ADDRN(i*3 + 1));
-			writel((dmi->dmi_addr[0] << 8) | dmi->dmi_addr[1],
-			       cp->regs + REG_MAC_ADDRN(i*3 + 2));
-			dmi = dmi->next;
-		}
-
-		/* use hw hash table for the next series of
-		 * multicast addresses
-		 */
-		memset(hash_table, 0, sizeof(hash_table));
-		while (dmi) {
- 			crc = ether_crc_le(ETH_ALEN, dmi->dmi_addr);
-			crc >>= 24;
-			hash_table[crc >> 4] |= 1 << (15 - (crc & 0xf));
-			dmi = dmi->next;
-		}
-	    	for (i=0; i < 16; i++)
-			writel(hash_table[i], cp->regs +
-			       REG_MAC_HASH_TABLEN(i));
+		cas_process_mc_list(cp);
 		rxcfg |= MAC_RX_CFG_HASH_FILTER_EN;
 	}
 
-- 
cgit v1.2.3


From e1d444771e0895c7706bc99857d69e4f2a58a531 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 11:09:31 +0000
Subject: net: convert multiple drivers to use netdev_for_each_mc_addr

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cpmac.c        |  4 +---
 drivers/net/cris/eth_v10.c |  6 ++----
 drivers/net/cs89x0.c       |  2 +-
 drivers/net/declance.c     |  6 ++----
 drivers/net/defxx.c        | 11 +++++------
 drivers/net/depca.c        |  3 +--
 drivers/net/dl2k.c         |  5 +----
 drivers/net/dm9000.c       |  5 ++---
 8 files changed, 15 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index c9c537be4ab9..0074f3bf17be 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -320,7 +320,6 @@ static int cpmac_config(struct net_device *dev, struct ifmap *map)
 static void cpmac_set_multicast_list(struct net_device *dev)
 {
 	struct dev_mc_list *iter;
-	int i;
 	u8 tmp;
 	u32 mbp, bit, hash[2] = { 0, };
 	struct cpmac_priv *priv = netdev_priv(dev);
@@ -340,8 +339,7 @@ static void cpmac_set_multicast_list(struct net_device *dev)
 			 * cpmac uses some strange mac address hashing
 			 * (not crc32)
 			 */
-			for (i = 0, iter = dev->mc_list; i < netdev_mc_count(dev);
-			     i++, iter = iter->next) {
+			netdev_for_each_mc_addr(iter, dev) {
 				bit = 0;
 				tmp = iter->dmi_addr[0];
 				bit  ^= (tmp >> 2) ^ (tmp << 4);
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index c9309eadebc1..dd24aadb778c 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -1596,13 +1596,12 @@ set_multicast_list(struct net_device *dev)
 	} else {
 		/* MC mode, receive normal and MC packets */
 		char hash_ix;
-		struct dev_mc_list *dmi = dev->mc_list;
-		int i;
+		struct dev_mc_list *dmi;
 		char *baddr;
 
 		lo_bits = 0x00000000ul;
 		hi_bits = 0x00000000ul;
-		for (i = 0; i < num_addr; i++) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			/* Calculate the hash index for the GA registers */
 
 			hash_ix = 0;
@@ -1632,7 +1631,6 @@ set_multicast_list(struct net_device *dev)
 			} else {
 				lo_bits |= (1 << hash_ix);
 			}
-			dmi = dmi->next;
 		}
 		/* Disable individual receive */
 		SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 0e79cef95c0a..14624019ce71 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1785,7 +1785,7 @@ static void set_multicast_list(struct net_device *dev)
 	{
 		lp->rx_mode = RX_ALL_ACCEPT;
 	}
-	else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
+	else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
 	{
 		/* The multicast-accept list is initialized to accept-all, and we
 		   rely on higher-level filtering for now. */
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 76e0de6a4263..8cf3cc6f20e2 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -940,9 +940,8 @@ static void lance_load_multicast(struct net_device *dev)
 {
 	struct lance_private *lp = netdev_priv(dev);
 	volatile u16 *ib = (volatile u16 *)dev->mem_start;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
-	int i;
 	u32 crc;
 
 	/* set all multicast bits */
@@ -960,9 +959,8 @@ static void lance_load_multicast(struct net_device *dev)
 	*lib_ptr(ib, filter[3], lp->type) = 0;
 
 	/* Add addresses */
-	for (i = 0; i < netdev_mc_count(dev); i++) {
+	netdev_for_each_mc_addr(dmi, dev) {
 		addrs = dmi->dmi_addr;
-		dmi = dmi->next;
 
 		/* multicast address? */
 		if (!(*addrs & 1))
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 5adb1e03956d..ed53a8d45f4e 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -2240,12 +2240,11 @@ static void dfx_ctl_set_multicast_list(struct net_device *dev)
 
 		/* Copy addresses to multicast address table, then update adapter CAM */
 
-		dmi = dev->mc_list;				/* point to first multicast addr */
-		for (i=0; i < bp->mc_count; i++)
-			{
-			memcpy(&bp->mc_table[i*FDDI_K_ALEN], dmi->dmi_addr, FDDI_K_ALEN);
-			dmi = dmi->next;			/* point to next multicast addr */
-			}
+		i = 0;
+		netdev_for_each_mc_addr(dmi, dev)
+			memcpy(&bp->mc_table[i++ * FDDI_K_ALEN],
+			       dmi->dmi_addr, FDDI_K_ALEN);
+
 		if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
 			{
 			DBG_printk("%s: Could not update multicast address table!\n", dev->name);
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 314bc96689f4..64a569bc92a6 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -1287,9 +1287,8 @@ static void SetMulticastFilter(struct net_device *dev)
 			lp->init_block.mcast_table[i] = 0;
 		}
 		/* Add multicast addresses */
-		for (i = 0; i < netdev_mc_count(dev); i++) {	/* for each address in the list */
+		netdev_for_each_mc_addr(dmi, dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 			if ((*addrs & 0x01) == 1) {	/* multicast address? */
 				crc = ether_crc(ETH_ALEN, addrs);
 				hashcode = (crc & 1);	/* hashcode is 6 LSb of CRC ... */
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index dea40953ed1b..b05bad829827 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -1132,15 +1132,12 @@ set_multicast (struct net_device *dev)
 		/* Receive broadcast and multicast frames */
 		rx_mode = ReceiveBroadcast | ReceiveMulticast | ReceiveUnicast;
 	} else if (!netdev_mc_empty(dev)) {
-		int i;
 		struct dev_mc_list *mclist;
 		/* Receive broadcast frames and multicast frames filtering
 		   by Hashtable */
 		rx_mode =
 		    ReceiveBroadcast | ReceiveMulticastHash | ReceiveUnicast;
-		for (i=0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-				i++, mclist=mclist->next)
-		{
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit, index = 0;
 			int crc = ether_crc_le (ETH_ALEN, mclist->dmi_addr);
 			/* The inverted high significant 6 bits of CRC are
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index da0985a7a87a..1c67f1138ca7 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -724,8 +724,7 @@ static void
 dm9000_hash_table(struct net_device *dev)
 {
 	board_info_t *db = netdev_priv(dev);
-	struct dev_mc_list *mcptr = dev->mc_list;
-	int mc_cnt = netdev_mc_count(dev);
+	struct dev_mc_list *mcptr;
 	int i, oft;
 	u32 hash_val;
 	u16 hash_table[4];
@@ -753,7 +752,7 @@ dm9000_hash_table(struct net_device *dev)
 		rcr |= RCR_ALL;
 
 	/* the multicast address in Hash Table : 64 bits */
-	for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+	netdev_for_each_mc_addr(mcptr, dev) {
 		hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
 		hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
 	}
-- 
cgit v1.2.3


From c3b7c12cd78d5c8264c87c29dcd9a8f1819f8313 Mon Sep 17 00:00:00 2001
From: "Steven J. Magnani" <steve@digidescorp.com>
Date: Wed, 17 Feb 2010 07:14:20 +0000
Subject: ll_temac: Add support for V2 LLTEMAC core

LLTEMAC V1 cores place only received packet length in the app4 word.
V2 cores place additional information in app4.
Mask out the additional information when retrieving the packet length.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ll_temac_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 8442c47e93e8..d7eb24cc2648 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -615,7 +615,7 @@ static void ll_temac_recv(struct net_device *ndev)
 	while ((bdstat & STS_CTRL_APP0_CMPLT)) {
 
 		skb = lp->rx_skb[lp->rx_bd_ci];
-		length = cur_p->app4;
+		length = cur_p->app4 & 0x3FFF;
 
 		skb_vaddr = virt_to_bus(skb->data);
 		dma_unmap_single(ndev->dev.parent, skb_vaddr, length,
@@ -938,6 +938,9 @@ static int __devexit temac_of_remove(struct of_device *op)
 
 static struct of_device_id temac_of_match[] __devinitdata = {
 	{ .compatible = "xlnx,xps-ll-temac-1.01.b", },
+	{ .compatible = "xlnx,xps-ll-temac-2.00.a", },
+	{ .compatible = "xlnx,xps-ll-temac-2.02.a", },
+	{ .compatible = "xlnx,xps-ll-temac-2.03.a", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, temac_of_match);
-- 
cgit v1.2.3


From 8ea7a37c5a312bfee51ff7f12f78efe4fbc901cc Mon Sep 17 00:00:00 2001
From: "Steven J. Magnani" <steve@digidescorp.com>
Date: Wed, 17 Feb 2010 07:55:07 +0000
Subject: ll_temac: Fix MAC address configuration from userland

A userland command to set the LLTEMAC MAC address,
i.e. "ifconfig eth0 hw addr xx:yy:zz:pp:dd:qq",
results in a device address of 00:01:xx:yy:zz:pp.
Correct this.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ll_temac_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index d7eb24cc2648..e53440253748 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -224,6 +224,13 @@ static int temac_set_mac_address(struct net_device *ndev, void *address)
 	return 0;
 }
 
+static int netdev_set_mac_address(struct net_device *ndev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	return temac_set_mac_address(ndev, addr->sa_data);
+}
+
 static void temac_set_multicast_list(struct net_device *ndev)
 {
 	struct temac_local *lp = netdev_priv(ndev);
@@ -768,7 +775,7 @@ static const struct net_device_ops temac_netdev_ops = {
 	.ndo_open = temac_open,
 	.ndo_stop = temac_stop,
 	.ndo_start_xmit = temac_start_xmit,
-	.ndo_set_mac_address = temac_set_mac_address,
+	.ndo_set_mac_address = netdev_set_mac_address,
 	//.ndo_set_multicast_list = temac_set_multicast_list,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = temac_poll_controller,
-- 
cgit v1.2.3


From c0c56955e7325ba2f910c760111457adc21ef0d4 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Wed, 17 Feb 2010 06:41:21 +0000
Subject: qlge: Fix dropping of large non-TCP/UDP frames.

This was found with pings that were large enough to span multiple rx
buffers.  The split frame logic handles this case nicely.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 2c052caee884..0541e777694d 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2066,21 +2066,11 @@ static unsigned long ql_process_mac_rx_intr(struct ql_adapter *qdev,
 		ql_process_mac_rx_page(qdev, rx_ring, ib_mac_rsp,
 						length, vlan_id);
 	} else {
-		struct bq_desc *lbq_desc;
-
-		/* Free small buffer that holds the IAL */
-		lbq_desc = ql_get_curr_sbuf(rx_ring);
-		netif_err(qdev, rx_err, qdev->ndev,
-			  "Dropping frame, len %d > mtu %d\n",
-			  length, qdev->ndev->mtu);
-
-		/* Unwind the large buffers for this frame. */
-		while (length > 0) {
-			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
-			length -= (length < rx_ring->lbq_buf_size) ?
-				length : rx_ring->lbq_buf_size;
-			put_page(lbq_desc->p.pg_chunk.page);
-		}
+		/* Non-TCP/UDP large frames that span multiple buffers
+		 * can be processed corrrectly by the split frame logic.
+		 */
+		ql_process_mac_split_rx_intr(qdev, rx_ring, ib_mac_rsp,
+						vlan_id);
 	}
 
 	return (unsigned long)length;
-- 
cgit v1.2.3


From 801e9096c566d40d2e7c9903dc902fa01a5a0b36 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Wed, 17 Feb 2010 06:41:22 +0000
Subject: qlge: Fix bonding mac address bug.

Use local copy of current mac address when initializing.  In bonding
testing we saw cases where dev_addr was out of data causing failover
errors.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      | 2 ++
 drivers/net/qlge/qlge_main.c | 6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 57d135e3bfaf..8b742b639ceb 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2139,6 +2139,8 @@ struct ql_adapter {
 	u16 device_id;
 	struct timer_list timer;
 	atomic_t lb_count;
+	/* Keep local copy of current mac address. */
+	char current_mac_addr[6];
 };
 
 /*
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 0541e777694d..c170349717c5 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -463,7 +463,7 @@ static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
 	char *addr;
 
 	if (set) {
-		addr = &qdev->ndev->dev_addr[0];
+		addr = &qdev->current_mac_addr[0];
 		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
 			     "Set Mac addr %pM\n", addr);
 	} else {
@@ -4301,6 +4301,8 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p)
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 	memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+	/* Update local copy of current mac address. */
+	memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len);
 
 	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
 	if (status)
@@ -4542,6 +4544,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	}
 
 	memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
+	/* Keep local copy of current mac address. */
+	memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len);
 
 	/* Set up the default ring sizes. */
 	qdev->tx_ring_size = NUM_TX_RING_ENTRIES;
-- 
cgit v1.2.3


From aa13bd6ef4ddd81080f972220fae30eb28f65b17 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Wed, 17 Feb 2010 06:41:23 +0000
Subject: qlge: Fix occasional loopback test failure.

On some servers we see the cleaning of the RX queue finish before all
the loopback packets are sent out.  This delay allows the queues to
settle before checking for successful completion.
Also, delay completion so link has time to come back up.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_ethtool.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 4f26afeb0f38..05b8bde9980d 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -503,7 +503,8 @@ static int ql_run_loopback_test(struct ql_adapter *qdev)
 			return -EPIPE;
 		atomic_inc(&qdev->lb_count);
 	}
-
+	/* Give queue time to settle before testing results. */
+	msleep(2);
 	ql_clean_lb_rx_ring(&qdev->rx_ring[0], 128);
 	return atomic_read(&qdev->lb_count) ? -EIO : 0;
 }
@@ -536,6 +537,10 @@ static void ql_self_test(struct net_device *ndev,
 			data[0] = 0;
 		}
 		clear_bit(QL_SELFTEST, &qdev->flags);
+		/* Give link time to come up after
+		 * port configuration changes.
+		 */
+		msleep_interruptible(4 * 1000);
 	} else {
 		netif_err(qdev, drv, qdev->ndev,
 			  "is down, Loopback test will fail.\n");
-- 
cgit v1.2.3


From a058a632747dd0f1799b12f4ecd54e43f5b5f10d Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Wed, 17 Feb 2010 01:34:22 +0000
Subject: be2net: a mini optimization in rx_compl_process() code

Introduce unlikely() for skb alloc failure and vlanf checks...

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index cbfaa3feb7c4..7bf1900df665 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -768,16 +768,8 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 	u32 vlanf, vid;
 	u8 vtm;
 
-	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
-	vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp);
-
-	/* vlanf could be wrongly set in some cards.
-	 * ignore if vtm is not set */
-	if ((adapter->cap & 0x400) && !vtm)
-		vlanf = 0;
-
 	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
-	if (!skb) {
+	if (unlikely(!skb)) {
 		if (net_ratelimit())
 			dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
 		be_rx_compl_discard(adapter, rxcp);
@@ -795,7 +787,15 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 	skb->protocol = eth_type_trans(skb, adapter->netdev);
 	skb->dev = adapter->netdev;
 
-	if (vlanf) {
+	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+	vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp);
+
+	/* vlanf could be wrongly set in some cards.
+	 * ignore if vtm is not set */
+	if ((adapter->cap & 0x400) && !vtm)
+		vlanf = 0;
+
+	if (unlikely(vlanf)) {
 		if (!adapter->vlan_grp || adapter->vlans_added == 0) {
 			kfree_skb(skb);
 			return;
-- 
cgit v1.2.3


From 7a1e9b2059d147461cff3dfbabbfb43f296a1eef Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Wed, 17 Feb 2010 01:35:11 +0000
Subject: be2net: don't rearm mcc cq when device is not open

When an MCC cmd is issued (via a netdev/ethtool op)
while the device is not open, the MCC CQ gets processed but the EQ
is not processed (as isr is not registered.) This can cause the EQ
to become full. So, while the device is not open, CQ must not be re-armed
to prevent EQ entries.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      |  1 +
 drivers/net/benet/be_cmds.c | 20 ++++++++++++++++++--
 drivers/net/benet/be_cmds.h |  2 ++
 drivers/net/benet/be_main.c |  5 +++++
 4 files changed, 26 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 5038c16bfe9b..2734a41a4627 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -151,6 +151,7 @@ struct be_eq_obj {
 struct be_mcc_obj {
 	struct be_queue_info q;
 	struct be_queue_info cq;
+	bool rearm_cq;
 };
 
 struct be_drvr_stats {
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 477f82bc647e..d7546b450505 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -104,10 +104,26 @@ static struct be_mcc_compl *be_mcc_compl_get(struct be_adapter *adapter)
 	return NULL;
 }
 
+void be_async_mcc_enable(struct be_adapter *adapter)
+{
+	spin_lock_bh(&adapter->mcc_cq_lock);
+
+	be_cq_notify(adapter, adapter->mcc_obj.cq.id, true, 0);
+	adapter->mcc_obj.rearm_cq = true;
+
+	spin_unlock_bh(&adapter->mcc_cq_lock);
+}
+
+void be_async_mcc_disable(struct be_adapter *adapter)
+{
+	adapter->mcc_obj.rearm_cq = false;
+}
+
 int be_process_mcc(struct be_adapter *adapter)
 {
 	struct be_mcc_compl *compl;
 	int num = 0, status = 0;
+	struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
 
 	spin_lock_bh(&adapter->mcc_cq_lock);
 	while ((compl = be_mcc_compl_get(adapter))) {
@@ -120,14 +136,14 @@ int be_process_mcc(struct be_adapter *adapter)
 				(struct be_async_event_link_state *) compl);
 		} else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) {
 				status = be_mcc_compl_process(adapter, compl);
-				atomic_dec(&adapter->mcc_obj.q.used);
+				atomic_dec(&mcc_obj->q.used);
 		}
 		be_mcc_compl_use(compl);
 		num++;
 	}
 
 	if (num)
-		be_cq_notify(adapter, adapter->mcc_obj.cq.id, true, num);
+		be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num);
 
 	spin_unlock_bh(&adapter->mcc_cq_lock);
 	return status;
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 7297b5a47657..01501dbae00a 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -937,6 +937,8 @@ extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
 				struct be_dma_mem *nonemb_cmd);
 extern int be_cmd_fw_init(struct be_adapter *adapter);
 extern int be_cmd_fw_clean(struct be_adapter *adapter);
+extern void be_async_mcc_enable(struct be_adapter *adapter);
+extern void be_async_mcc_disable(struct be_adapter *adapter);
 extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 				u32 loopback_type, u32 pkt_size,
 				u32 num_pkts, u64 pattern);
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 7bf1900df665..43dbe288a5ef 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1655,6 +1655,9 @@ static int be_open(struct net_device *netdev)
 	/* Rx compl queue may be in unarmed state; rearm it */
 	be_cq_notify(adapter, adapter->rx_obj.cq.id, true, 0);
 
+	/* Now that interrupts are on we can process async mcc */
+	be_async_mcc_enable(adapter);
+
 	status = be_cmd_link_status_query(adapter, &link_up, &mac_speed,
 			&link_speed);
 	if (status)
@@ -1780,6 +1783,8 @@ static int be_close(struct net_device *netdev)
 
 	cancel_delayed_work_sync(&adapter->work);
 
+	be_async_mcc_disable(adapter);
+
 	netif_stop_queue(netdev);
 	netif_carrier_off(netdev);
 	adapter->link_up = false;
-- 
cgit v1.2.3


From 89420424fce28769c338909393518087befe8b37 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Wed, 17 Feb 2010 01:35:26 +0000
Subject: be2net: fix rx-path to ignore a flush completion

The flush compl (compl with numfrags == 0; no data) is rcvd
from hw to indicate completion of RXQ destory operation. Fix
the RX path to not process it as RX data.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 43dbe288a5ef..2c3deadd2d83 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -680,17 +680,17 @@ static void be_rx_compl_discard(struct be_adapter *adapter,
  * indicated by rxcp.
  */
 static void skb_fill_rx_data(struct be_adapter *adapter,
-			struct sk_buff *skb, struct be_eth_rx_compl *rxcp)
+			struct sk_buff *skb, struct be_eth_rx_compl *rxcp,
+			u16 num_rcvd)
 {
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	struct be_rx_page_info *page_info;
-	u16 rxq_idx, i, num_rcvd, j;
+	u16 rxq_idx, i, j;
 	u32 pktsize, hdr_len, curr_frag_len, size;
 	u8 *start;
 
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
 	pktsize = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
-	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
 
 	page_info = get_rx_page_info(adapter, rxq_idx);
 
@@ -766,8 +766,14 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 {
 	struct sk_buff *skb;
 	u32 vlanf, vid;
+	u16 num_rcvd;
 	u8 vtm;
 
+	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+	/* Is it a flush compl that has no data */
+	if (unlikely(num_rcvd == 0))
+		return;
+
 	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
 	if (unlikely(!skb)) {
 		if (net_ratelimit())
@@ -776,7 +782,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 		return;
 	}
 
-	skb_fill_rx_data(adapter, skb, rxcp);
+	skb_fill_rx_data(adapter, skb, rxcp, num_rcvd);
 
 	if (do_pkt_csum(rxcp, adapter->rx_csum))
 		skb->ip_summed = CHECKSUM_NONE;
@@ -823,6 +829,10 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 	u8 vtm;
 
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+	/* Is it a flush compl that has no data */
+	if (unlikely(num_rcvd == 0))
+		return;
+
 	pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
 	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
@@ -1273,6 +1283,11 @@ static void be_rx_queues_destroy(struct be_adapter *adapter)
 	q = &adapter->rx_obj.q;
 	if (q->created) {
 		be_cmd_q_destroy(adapter, q, QTYPE_RXQ);
+
+		/* After the rxq is invalidated, wait for a grace time
+		 * of 1ms for all dma to end and the flush compl to arrive
+		 */
+		mdelay(1);
 		be_rx_q_clean(adapter);
 	}
 	be_queue_free(adapter, q);
-- 
cgit v1.2.3


From 82456b031e3c3b5bf95a7e49bd9b68b146446e76 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Wed, 17 Feb 2010 01:35:37 +0000
Subject: be2net: implement pci shutdown handler

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 2c3deadd2d83..68e7848ac0b0 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -2449,6 +2449,26 @@ static int be_resume(struct pci_dev *pdev)
 	return 0;
 }
 
+/*
+ * An FLR will stop BE from DMAing any data.
+ */
+static void be_shutdown(struct pci_dev *pdev)
+{
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev =  adapter->netdev;
+
+	netif_device_detach(netdev);
+
+	be_cmd_reset_function(adapter);
+
+	if (adapter->wol)
+		be_setup_wol(adapter, true);
+
+	pci_disable_device(pdev);
+
+	return;
+}
+
 static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev,
 				pci_channel_state_t state)
 {
@@ -2544,6 +2564,7 @@ static struct pci_driver be_driver = {
 	.remove = be_remove,
 	.suspend = be_suspend,
 	.resume = be_resume,
+	.shutdown = be_shutdown,
 	.err_handler = &be_eeh_handlers
 };
 
-- 
cgit v1.2.3


From 60b86755929e1a7e9038c8d860a8491cfdf8d93a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 10:30:23 +0000
Subject: usbnet: Convert dev(dbg|err|warn|info) macros to netdev_<level>

These macros are too similar to the dev_<level> equivalents
but take a usbnet * argument.  Convert them to the recently
introduced netdev_<level> macros and remove the old macros.

The old macros had "\n" appended to the format string.
Add the "\n" to the converted uses.

Some existing uses of the dev<foo> macros in cdc_eem.c
probably mistakenly had trailing "\n".  No "\n" added there.

Fix net1080 this/other log message inversion.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/asix.c            |  97 ++++++------
 drivers/net/usb/cdc_eem.c         |  10 +-
 drivers/net/usb/cdc_ether.c       |  18 +--
 drivers/net/usb/dm9601.c          |  49 +++---
 drivers/net/usb/int51x1.c         |  15 +-
 drivers/net/usb/net1080.c         | 101 ++++++------
 drivers/net/usb/rndis_host.c      |  10 +-
 drivers/net/usb/smsc95xx.c        | 188 +++++++++++-----------
 drivers/net/usb/usbnet.c          | 162 +++++++++----------
 drivers/net/wireless/rndis_wlan.c | 325 ++++++++++++++++++++------------------
 include/linux/usb/usbnet.h        |  21 ---
 11 files changed, 507 insertions(+), 489 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index f02551713b13..f605204de3e5 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -184,8 +184,8 @@ static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	void *buf;
 	int err = -ENOMEM;
 
-	devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
-		cmd, value, index, size);
+	netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
 
 	buf = kmalloc(size, GFP_KERNEL);
 	if (!buf)
@@ -217,8 +217,8 @@ static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	void *buf = NULL;
 	int err = -ENOMEM;
 
-	devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
-		cmd, value, index, size);
+	netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
 
 	if (data) {
 		buf = kmalloc(size, GFP_KERNEL);
@@ -264,15 +264,15 @@ asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	int status;
 	struct urb *urb;
 
-	devdbg(dev,"asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
-		cmd, value, index, size);
+	netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+		   cmd, value, index, size);
 	if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
-		deverr(dev, "Error allocating URB in write_cmd_async!");
+		netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n");
 		return;
 	}
 
 	if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
-		deverr(dev, "Failed to allocate memory for control request");
+		netdev_err(dev->net, "Failed to allocate memory for control request\n");
 		usb_free_urb(urb);
 		return;
 	}
@@ -289,8 +289,8 @@ asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 			     asix_async_cmd_callback, req);
 
 	if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
-		deverr(dev, "Error submitting the control message: status=%d",
-				status);
+		netdev_err(dev->net, "Error submitting the control message: status=%d\n",
+			   status);
 		kfree(req);
 		usb_free_urb(urb);
 	}
@@ -314,7 +314,7 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	while (skb->len > 0) {
 		if ((short)(header & 0x0000ffff) !=
 		    ~((short)((header & 0xffff0000) >> 16))) {
-			deverr(dev,"asix_rx_fixup() Bad Header Length");
+			netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n");
 		}
 		/* get the packet length */
 		size = (u16) (header & 0x0000ffff);
@@ -322,7 +322,8 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		if ((skb->len) - ((size + 1) & 0xfffe) == 0)
 			return 2;
 		if (size > ETH_FRAME_LEN) {
-			deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+			netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+				   size);
 			return 0;
 		}
 		ax_skb = skb_clone(skb, GFP_ATOMIC);
@@ -348,7 +349,8 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	}
 
 	if (skb->len < 0) {
-		deverr(dev,"asix_rx_fixup() Bad SKB Length %d", skb->len);
+		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n",
+			   skb->len);
 		return 0;
 	}
 	return 1;
@@ -409,7 +411,7 @@ static void asix_status(struct usbnet *dev, struct urb *urb)
 			usbnet_defer_kevent (dev, EVENT_LINK_RESET );
 		} else
 			netif_carrier_off(dev->net);
-		devdbg(dev, "Link Status is: %d", link);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
 	}
 }
 
@@ -418,7 +420,7 @@ static inline int asix_set_sw_mii(struct usbnet *dev)
 	int ret;
 	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
 	if (ret < 0)
-		deverr(dev, "Failed to enable software MII access");
+		netdev_err(dev->net, "Failed to enable software MII access\n");
 	return ret;
 }
 
@@ -427,7 +429,7 @@ static inline int asix_set_hw_mii(struct usbnet *dev)
 	int ret;
 	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
 	if (ret < 0)
-		deverr(dev, "Failed to enable hardware MII access");
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
 	return ret;
 }
 
@@ -436,13 +438,14 @@ static inline int asix_get_phy_addr(struct usbnet *dev)
 	u8 buf[2];
 	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
 
-	devdbg(dev, "asix_get_phy_addr()");
+	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
 	if (ret < 0) {
-		deverr(dev, "Error reading PHYID register: %02x", ret);
+		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
 		goto out;
 	}
-	devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((__le16 *)buf));
+	netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
+		   *((__le16 *)buf));
 	ret = buf[1];
 
 out:
@@ -455,7 +458,7 @@ static int asix_sw_reset(struct usbnet *dev, u8 flags)
 
         ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
 	if (ret < 0)
-		deverr(dev,"Failed to send software reset: %02x", ret);
+		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
 
 	return ret;
 }
@@ -466,7 +469,7 @@ static u16 asix_read_rx_ctl(struct usbnet *dev)
 	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
 
 	if (ret < 0) {
-		deverr(dev, "Error reading RX_CTL register: %02x", ret);
+		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
 		goto out;
 	}
 	ret = le16_to_cpu(v);
@@ -478,11 +481,11 @@ static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
 {
 	int ret;
 
-	devdbg(dev,"asix_write_rx_ctl() - mode = 0x%04x", mode);
+	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
 	if (ret < 0)
-		deverr(dev, "Failed to write RX_CTL mode to 0x%04x: %02x",
-		       mode, ret);
+		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+			   mode, ret);
 
 	return ret;
 }
@@ -493,7 +496,8 @@ static u16 asix_read_medium_status(struct usbnet *dev)
 	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
 
 	if (ret < 0) {
-		deverr(dev, "Error reading Medium Status register: %02x", ret);
+		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+			   ret);
 		goto out;
 	}
 	ret = le16_to_cpu(v);
@@ -505,11 +509,11 @@ static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
 {
 	int ret;
 
-	devdbg(dev,"asix_write_medium_mode() - mode = 0x%04x", mode);
+	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
 	if (ret < 0)
-		deverr(dev, "Failed to write Medium Mode mode to 0x%04x: %02x",
-			mode, ret);
+		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+			   mode, ret);
 
 	return ret;
 }
@@ -518,11 +522,11 @@ static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
 {
 	int ret;
 
-	devdbg(dev,"asix_write_gpio() - value = 0x%04x", value);
+	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
 	if (ret < 0)
-		deverr(dev, "Failed to write GPIO value 0x%04x: %02x",
-			value, ret);
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+			   value, ret);
 
 	if (sleep)
 		msleep(sleep);
@@ -588,7 +592,8 @@ static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	asix_set_hw_mii(dev);
 	mutex_unlock(&dev->phy_mutex);
 
-	devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res));
+	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -599,7 +604,8 @@ asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res = cpu_to_le16(val);
 
-	devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val);
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
 	mutex_lock(&dev->phy_mutex);
 	asix_set_sw_mii(dev);
 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
@@ -800,7 +806,8 @@ static int ax88172_link_reset(struct usbnet *dev)
 	if (ecmd.duplex != DUPLEX_FULL)
 		mode |= ~AX88172_MEDIUM_FD;
 
-	devdbg(dev, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
+		   ecmd.speed, ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -902,7 +909,8 @@ static int ax88772_link_reset(struct usbnet *dev)
 	if (ecmd.duplex != DUPLEX_FULL)
 		mode &= ~AX_MEDIUM_FD;
 
-	devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
+		   ecmd.speed, ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -1059,10 +1067,10 @@ static int marvell_phy_init(struct usbnet *dev)
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	u16 reg;
 
-	devdbg(dev,"marvell_phy_init()");
+	netdev_dbg(dev->net, "marvell_phy_init()\n");
 
 	reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
-	devdbg(dev,"MII_MARVELL_STATUS = 0x%04x", reg);
+	netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
 
 	asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
 			MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
@@ -1070,7 +1078,7 @@ static int marvell_phy_init(struct usbnet *dev)
 	if (data->ledmode) {
 		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
 			MII_MARVELL_LED_CTRL);
-		devdbg(dev,"MII_MARVELL_LED_CTRL (1) = 0x%04x", reg);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
 
 		reg &= 0xf8ff;
 		reg |= (1 + 0x0100);
@@ -1079,7 +1087,7 @@ static int marvell_phy_init(struct usbnet *dev)
 
 		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
 			MII_MARVELL_LED_CTRL);
-		devdbg(dev,"MII_MARVELL_LED_CTRL (2) = 0x%04x", reg);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
 		reg &= 0xfc0f;
 	}
 
@@ -1090,7 +1098,7 @@ static int marvell_led_status(struct usbnet *dev, u16 speed)
 {
 	u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
 
-	devdbg(dev, "marvell_led_status() read 0x%04x", reg);
+	netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
 
 	/* Clear out the center LED bits - 0x03F0 */
 	reg &= 0xfc0f;
@@ -1106,7 +1114,7 @@ static int marvell_led_status(struct usbnet *dev, u16 speed)
 			reg |= 0x02f0;
 	}
 
-	devdbg(dev, "marvell_led_status() writing 0x%04x", reg);
+	netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
 	asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
 
 	return 0;
@@ -1118,7 +1126,7 @@ static int ax88178_link_reset(struct usbnet *dev)
 	struct ethtool_cmd ecmd;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 
-	devdbg(dev,"ax88178_link_reset()");
+	netdev_dbg(dev->net, "ax88178_link_reset()\n");
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
@@ -1138,7 +1146,8 @@ static int ax88178_link_reset(struct usbnet *dev)
 	else
 		mode &= ~AX_MEDIUM_FD;
 
-	devdbg(dev, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
+		   ecmd.speed, ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -1188,7 +1197,7 @@ static int ax88178_change_mtu(struct net_device *net, int new_mtu)
 	struct usbnet *dev = netdev_priv(net);
 	int ll_mtu = new_mtu + net->hard_header_len + 4;
 
-	devdbg(dev, "ax88178_change_mtu() new_mtu=%d", new_mtu);
+	netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
 
 	if (new_mtu <= 0 || ll_mtu > 16384)
 		return -EINVAL;
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index c337ffc3304a..a4a85a6ed86d 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -73,7 +73,7 @@ static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
 		usb_free_urb(urb);
 fail:
 		dev_kfree_skb(skb);
-		devwarn(dev, "link cmd failure\n");
+		netdev_warn(dev->net, "link cmd failure\n");
 		return;
 	}
 }
@@ -212,7 +212,8 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			 * b15:		1 (EEM command)
 			 */
 			if (header & BIT(14)) {
-				devdbg(dev, "reserved command %04x\n", header);
+				netdev_dbg(dev->net, "reserved command %04x\n",
+					   header);
 				continue;
 			}
 
@@ -255,8 +256,9 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			case 1:		/* Echo response */
 			case 5:		/* Tickle */
 			default:	/* reserved */
-				devwarn(dev, "unexpected link command %d\n",
-						bmEEMCmd);
+				netdev_warn(dev->net,
+					    "unexpected link command %d\n",
+					    bmEEMCmd);
 				continue;
 			}
 
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4f27f022fbf7..7e5a75269cc5 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -340,9 +340,9 @@ EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
 {
 	if (netif_msg_timer(dev))
-		devinfo(dev, "link speeds: %u kbps up, %u kbps down",
-			__le32_to_cpu(speeds[0]) / 1000,
-		__le32_to_cpu(speeds[1]) / 1000);
+		netdev_info(dev->net, "link speeds: %u kbps up, %u kbps down\n",
+			    __le32_to_cpu(speeds[0]) / 1000,
+			    __le32_to_cpu(speeds[1]) / 1000);
 }
 
 static void cdc_status(struct usbnet *dev, struct urb *urb)
@@ -362,8 +362,8 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 	switch (event->bNotificationType) {
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
 		if (netif_msg_timer(dev))
-			devdbg(dev, "CDC: carrier %s",
-					event->wValue ? "on" : "off");
+			netdev_dbg(dev->net, "CDC: carrier %s\n",
+				   event->wValue ? "on" : "off");
 		if (event->wValue)
 			netif_carrier_on(dev->net);
 		else
@@ -371,8 +371,8 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 		break;
 	case USB_CDC_NOTIFY_SPEED_CHANGE:	/* tx/rx rates */
 		if (netif_msg_timer(dev))
-			devdbg(dev, "CDC: speed change (len %d)",
-					urb->actual_length);
+			netdev_dbg(dev->net, "CDC: speed change (len %d)\n",
+				   urb->actual_length);
 		if (urb->actual_length != (sizeof *event + 8))
 			set_bit(EVENT_STS_SPLIT, &dev->flags);
 		else
@@ -382,8 +382,8 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 	 * but there are no standard formats for the response data.
 	 */
 	default:
-		deverr(dev, "CDC: unexpected notification %02x!",
-				 event->bNotificationType);
+		netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
+			   event->bNotificationType);
 		break;
 	}
 }
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index c820fec62041..269339769f47 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -58,7 +58,7 @@ static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
 	void *buf;
 	int err = -ENOMEM;
 
-	devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
+	netdev_dbg(dev->net, "dm_read() reg=0x%02x length=%d\n", reg, length);
 
 	buf = kmalloc(length, GFP_KERNEL);
 	if (!buf)
@@ -89,7 +89,7 @@ static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 	void *buf = NULL;
 	int err = -ENOMEM;
 
-	devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
+	netdev_dbg(dev->net, "dm_write() reg=0x%02x, length=%d\n", reg, length);
 
 	if (data) {
 		buf = kmalloc(length, GFP_KERNEL);
@@ -112,7 +112,8 @@ static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
 
 static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
 {
-	devdbg(dev, "dm_write_reg() reg=0x%02x, value=0x%02x", reg, value);
+	netdev_dbg(dev->net, "dm_write_reg() reg=0x%02x, value=0x%02x\n",
+		   reg, value);
 	return usb_control_msg(dev->udev,
 			       usb_sndctrlpipe(dev->udev, 0),
 			       DM_WRITE_REG,
@@ -142,13 +143,13 @@ static void dm_write_async_helper(struct usbnet *dev, u8 reg, u8 value,
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		deverr(dev, "Error allocating URB in dm_write_async_helper!");
+		netdev_err(dev->net, "Error allocating URB in dm_write_async_helper!\n");
 		return;
 	}
 
 	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
 	if (!req) {
-		deverr(dev, "Failed to allocate memory for control request");
+		netdev_err(dev->net, "Failed to allocate memory for control request\n");
 		usb_free_urb(urb);
 		return;
 	}
@@ -166,8 +167,8 @@ static void dm_write_async_helper(struct usbnet *dev, u8 reg, u8 value,
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status < 0) {
-		deverr(dev, "Error submitting the control message: status=%d",
-		       status);
+		netdev_err(dev->net, "Error submitting the control message: status=%d\n",
+			   status);
 		kfree(req);
 		usb_free_urb(urb);
 	}
@@ -175,15 +176,15 @@ static void dm_write_async_helper(struct usbnet *dev, u8 reg, u8 value,
 
 static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
 {
-	devdbg(dev, "dm_write_async() reg=0x%02x length=%d", reg, length);
+	netdev_dbg(dev->net, "dm_write_async() reg=0x%02x length=%d\n", reg, length);
 
 	dm_write_async_helper(dev, reg, 0, length, data);
 }
 
 static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
 {
-	devdbg(dev, "dm_write_reg_async() reg=0x%02x value=0x%02x",
-	       reg, value);
+	netdev_dbg(dev->net, "dm_write_reg_async() reg=0x%02x value=0x%02x\n",
+		   reg, value);
 
 	dm_write_async_helper(dev, reg, value, 0, NULL);
 }
@@ -211,7 +212,7 @@ static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *valu
 	}
 
 	if (i == DM_TIMEOUT) {
-		deverr(dev, "%s read timed out!", phy ? "phy" : "eeprom");
+		netdev_err(dev->net, "%s read timed out!\n", phy ? "phy" : "eeprom");
 		ret = -EIO;
 		goto out;
 	}
@@ -219,8 +220,8 @@ static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *valu
 	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
 	ret = dm_read(dev, DM_SHARED_DATA, 2, value);
 
-	devdbg(dev, "read shared %d 0x%02x returned 0x%04x, %d",
-	       phy, reg, *value, ret);
+	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+		   phy, reg, *value, ret);
 
  out:
 	mutex_unlock(&dev->phy_mutex);
@@ -254,7 +255,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu
 	}
 
 	if (i == DM_TIMEOUT) {
-		deverr(dev, "%s write timed out!", phy ? "phy" : "eeprom");
+		netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
 		ret = -EIO;
 		goto out;
 	}
@@ -304,15 +305,15 @@ static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
 	__le16 res;
 
 	if (phy_id) {
-		devdbg(dev, "Only internal phy supported");
+		netdev_dbg(dev->net, "Only internal phy supported\n");
 		return 0;
 	}
 
 	dm_read_shared_word(dev, 1, loc, &res);
 
-	devdbg(dev,
-	       "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x",
-	       phy_id, loc, le16_to_cpu(res));
+	netdev_dbg(dev->net,
+		   "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
 
 	return le16_to_cpu(res);
 }
@@ -324,12 +325,12 @@ static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
 	__le16 res = cpu_to_le16(val);
 
 	if (phy_id) {
-		devdbg(dev, "Only internal phy supported");
+		netdev_dbg(dev->net, "Only internal phy supported\n");
 		return;
 	}
 
-	devdbg(dev,"dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x",
-	       phy_id, loc, val);
+	netdev_dbg(dev->net, "dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
 
 	dm_write_shared_word(dev, 1, loc, res);
 }
@@ -592,7 +593,7 @@ static void dm9601_status(struct usbnet *dev, struct urb *urb)
 		}
 		else
 			netif_carrier_off(dev->net);
-		devdbg(dev, "Link Status is: %d", link);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
 	}
 }
 
@@ -603,8 +604,8 @@ static int dm9601_link_reset(struct usbnet *dev)
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 
-	devdbg(dev, "link_reset() speed: %d duplex: %d",
-	       ecmd.speed, ecmd.duplex);
+	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
+		   ecmd.speed, ecmd.duplex);
 
 	return 0;
 }
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
index 9ab5c1983a7d..3c228df57062 100644
--- a/drivers/net/usb/int51x1.c
+++ b/drivers/net/usb/int51x1.c
@@ -51,7 +51,7 @@ static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	int len;
 
 	if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
-		deverr(dev, "unexpected tiny rx frame");
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
 		return 0;
 	}
 
@@ -138,25 +138,25 @@ static void int51x1_set_multicast(struct net_device *netdev)
 	if (netdev->flags & IFF_PROMISC) {
 		/* do not expect to see traffic of other PLCs */
 		filter |= PACKET_TYPE_PROMISCUOUS;
-		devinfo(dev, "promiscuous mode enabled");
+		netdev_info(dev->net, "promiscuous mode enabled\n");
 	} else if (!netdev_mc_empty(netdev) ||
 		  (netdev->flags & IFF_ALLMULTI)) {
 		filter |= PACKET_TYPE_ALL_MULTICAST;
-		devdbg(dev, "receive all multicast enabled");
+		netdev_dbg(dev->net, "receive all multicast enabled\n");
 	} else {
 		/* ~PROMISCUOUS, ~MULTICAST */
-		devdbg(dev, "receive own packets only");
+		netdev_dbg(dev->net, "receive own packets only\n");
 	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		devwarn(dev, "Error allocating URB");
+		netdev_warn(dev->net, "Error allocating URB\n");
 		return;
 	}
 
 	req = kmalloc(sizeof(*req), GFP_ATOMIC);
 	if (!req) {
-		devwarn(dev, "Error allocating control msg");
+		netdev_warn(dev->net, "Error allocating control msg\n");
 		goto out;
 	}
 
@@ -173,7 +173,8 @@ static void int51x1_set_multicast(struct net_device *netdev)
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status < 0) {
-		devwarn(dev, "Error submitting control msg, sts=%d", status);
+		netdev_warn(dev->net, "Error submitting control msg, sts=%d\n",
+			    status);
 		goto out1;
 	}
 	return;
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index aeb1ab03a9ee..f6994053c101 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -205,23 +205,24 @@ static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
 {
 	if (!netif_msg_link(dev))
 		return;
-	devdbg(dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
-			" this%s%s;"
-			" other%s%s; r/o 0x%x",
-		dev->udev->bus->bus_name, dev->udev->devpath,
-		usbctl,
-		(usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
-		(usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
-		(usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
-		(usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
-		(usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
-
-		(usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
-		(usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
-		(usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
-		(usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
-		usbctl & ~USBCTL_WRITABLE_MASK
-		);
+	netdev_dbg(dev->net, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
+		   " this%s%s;"
+		   " other%s%s; r/o 0x%x\n",
+		   dev->udev->bus->bus_name, dev->udev->devpath,
+		   usbctl,
+		   (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
+		   (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
+		   (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
+		   (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
+		   (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
+
+		   (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
+		   (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
+
+		   (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
+		   (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
+
+		   usbctl & ~USBCTL_WRITABLE_MASK);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -250,28 +251,25 @@ static inline void nc_dump_status(struct usbnet *dev, u16 status)
 {
 	if (!netif_msg_link(dev))
 		return;
-	devdbg(dev, "net1080 %s-%s status 0x%x:"
-			" this (%c) PKT=%d%s%s%s;"
-			" other PKT=%d%s%s%s; unspec 0x%x",
-		dev->udev->bus->bus_name, dev->udev->devpath,
-		status,
-
-		// XXX the packet counts don't seem right
-		// (1 at reset, not 0); maybe UNSPEC too
-
-		(status & STATUS_PORT_A) ? 'A' : 'B',
-		STATUS_PACKETS_THIS(status),
-		(status & STATUS_CONN_THIS) ? " CON" : "",
-		(status & STATUS_SUSPEND_THIS) ? " SUS" : "",
-		(status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
-
-		STATUS_PACKETS_OTHER(status),
-		(status & STATUS_CONN_OTHER) ? " CON" : "",
-		(status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
-		(status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
-
-		status & STATUS_UNSPEC_MASK
-		);
+	netdev_dbg(dev->net, "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
+		   dev->udev->bus->bus_name, dev->udev->devpath,
+		   status,
+
+		   // XXX the packet counts don't seem right
+		   // (1 at reset, not 0); maybe UNSPEC too
+
+		   (status & STATUS_PORT_A) ? 'A' : 'B',
+		   STATUS_PACKETS_THIS(status),
+		   (status & STATUS_CONN_THIS) ? " CON" : "",
+		   (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
+		   (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
+
+		   STATUS_PACKETS_OTHER(status),
+		   (status & STATUS_CONN_OTHER) ? " CON" : "",
+		   (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
+		   (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
+
+		   status & STATUS_UNSPEC_MASK);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -287,9 +285,9 @@ static inline void nc_dump_status(struct usbnet *dev, u16 status)
 static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
 {
 	if (netif_msg_link(dev))
-		devdbg(dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
-			dev->udev->bus->bus_name, dev->udev->devpath,
-			ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
+		netdev_dbg(dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n",
+			   dev->udev->bus->bus_name, dev->udev->devpath,
+			   ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
 }
 
 /*-------------------------------------------------------------------------*/
@@ -335,10 +333,9 @@ static int net1080_reset(struct usbnet *dev)
 	dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
 
 	if (netif_msg_link(dev))
-		devinfo(dev, "port %c, peer %sconnected",
-			(status & STATUS_PORT_A) ? 'A' : 'B',
-			(status & STATUS_CONN_OTHER) ? "" : "dis"
-			);
+		netdev_info(dev->net, "port %c, peer %sconnected\n",
+			    (status & STATUS_PORT_A) ? 'A' : 'B',
+			    (status & STATUS_CONN_OTHER) ? "" : "dis");
 	retval = 0;
 
 done:
@@ -416,7 +413,7 @@ static void nc_ensure_sync(struct usbnet *dev)
 		}
 
 		if (netif_msg_rx_err(dev))
-			devdbg(dev, "flush net1080; too many framing errors");
+			netdev_dbg(dev->net, "flush net1080; too many framing errors\n");
 		dev->frame_errors = 0;
 	}
 }
@@ -486,8 +483,8 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		return 0;
 	}
 #if 0
-	devdbg(dev, "frame <rx h %d p %d id %d", header->hdr_len,
-		header->packet_len, header->packet_id);
+	netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len,
+		   header->packet_len, header->packet_id);
 #endif
 	dev->frame_errors = 0;
 	return 1;
@@ -547,9 +544,9 @@ encapsulate:
 	trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
 	put_unaligned(header->packet_id, &trailer->packet_id);
 #if 0
-	devdbg(dev, "frame >tx h %d p %d id %d",
-		header->hdr_len, header->packet_len,
-		header->packet_id);
+	netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n",
+		   header->hdr_len, header->packet_len,
+		   header->packet_id);
 #endif
 	return skb;
 }
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 490fa8f55424..f01f02401856 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -57,8 +57,8 @@
  */
 void rndis_status(struct usbnet *dev, struct urb *urb)
 {
-	devdbg(dev, "rndis status urb, len %d stat %d",
-		urb->actual_length, urb->status);
+	netdev_dbg(dev->net, "rndis status urb, len %d stat %d\n",
+		   urb->actual_length, urb->status);
 	// FIXME for keepalives, respond immediately (asynchronously)
 	// if not an RNDIS status, do like cdc_status(dev,urb) does
 }
@@ -497,9 +497,9 @@ int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			     skb->len < msg_len ||
 			     (data_offset + data_len + 8) > msg_len)) {
 			dev->net->stats.rx_frame_errors++;
-			devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
-				le32_to_cpu(hdr->msg_type),
-				msg_len, data_offset, data_len, skb->len);
+			netdev_dbg(dev->net, "bad rndis message %d/%d/%d/%d, len %d\n",
+				   le32_to_cpu(hdr->msg_type),
+				   msg_len, data_offset, data_len, skb->len);
 			return 0;
 		}
 		skb_pull(skb, 8 + data_offset);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 48555d0e374d..d4cbcefbff38 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -78,7 +78,7 @@ static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
 		00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
 
 	if (unlikely(ret < 0))
-		devwarn(dev, "Failed to read register index 0x%08x", index);
+		netdev_warn(dev->net, "Failed to read register index 0x%08x\n", index);
 
 	le32_to_cpus(buf);
 	*data = *buf;
@@ -106,7 +106,7 @@ static int smsc95xx_write_reg(struct usbnet *dev, u32 index, u32 data)
 		00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
 
 	if (unlikely(ret < 0))
-		devwarn(dev, "Failed to write register index 0x%08x", index);
+		netdev_warn(dev->net, "Failed to write register index 0x%08x\n", index);
 
 	kfree(buf);
 
@@ -138,7 +138,7 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
 
 	/* confirm MII not busy */
 	if (smsc95xx_phy_wait_not_busy(dev)) {
-		devwarn(dev, "MII is busy in smsc95xx_mdio_read");
+		netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_read\n");
 		mutex_unlock(&dev->phy_mutex);
 		return -EIO;
 	}
@@ -150,7 +150,7 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
 	smsc95xx_write_reg(dev, MII_ADDR, addr);
 
 	if (smsc95xx_phy_wait_not_busy(dev)) {
-		devwarn(dev, "Timed out reading MII reg %02X", idx);
+		netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
 		mutex_unlock(&dev->phy_mutex);
 		return -EIO;
 	}
@@ -172,7 +172,7 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
 
 	/* confirm MII not busy */
 	if (smsc95xx_phy_wait_not_busy(dev)) {
-		devwarn(dev, "MII is busy in smsc95xx_mdio_write");
+		netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_write\n");
 		mutex_unlock(&dev->phy_mutex);
 		return;
 	}
@@ -187,7 +187,7 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
 	smsc95xx_write_reg(dev, MII_ADDR, addr);
 
 	if (smsc95xx_phy_wait_not_busy(dev))
-		devwarn(dev, "Timed out writing MII reg %02X", idx);
+		netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
 
 	mutex_unlock(&dev->phy_mutex);
 }
@@ -205,7 +205,7 @@ static int smsc95xx_wait_eeprom(struct usbnet *dev)
 	} while (!time_after(jiffies, start_time + HZ));
 
 	if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
-		devwarn(dev, "EEPROM read operation timeout");
+		netdev_warn(dev->net, "EEPROM read operation timeout\n");
 		return -EIO;
 	}
 
@@ -226,7 +226,7 @@ static int smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
 		udelay(40);
 	} while (!time_after(jiffies, start_time + HZ));
 
-	devwarn(dev, "EEPROM is busy");
+	netdev_warn(dev->net, "EEPROM is busy\n");
 	return -EIO;
 }
 
@@ -308,7 +308,7 @@ static void smsc95xx_async_cmd_callback(struct urb *urb)
 	int status = urb->status;
 
 	if (status < 0)
-		devwarn(dev, "async callback failed with %d", status);
+		netdev_warn(dev->net, "async callback failed with %d\n", status);
 
 	kfree(usb_context);
 	usb_free_urb(urb);
@@ -323,13 +323,13 @@ static int smsc95xx_write_reg_async(struct usbnet *dev, u16 index, u32 *data)
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		devwarn(dev, "Error allocating URB");
+		netdev_warn(dev->net, "Error allocating URB\n");
 		return -ENOMEM;
 	}
 
 	usb_context = kmalloc(sizeof(struct usb_context), GFP_ATOMIC);
 	if (usb_context == NULL) {
-		devwarn(dev, "Error allocating control msg");
+		netdev_warn(dev->net, "Error allocating control msg\n");
 		usb_free_urb(urb);
 		return -ENOMEM;
 	}
@@ -348,7 +348,8 @@ static int smsc95xx_write_reg_async(struct usbnet *dev, u16 index, u32 *data)
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status < 0) {
-		devwarn(dev, "Error submitting control msg, sts=%d", status);
+		netdev_warn(dev->net, "Error submitting control msg, sts=%d\n",
+			    status);
 		kfree(usb_context);
 		usb_free_urb(urb);
 	}
@@ -376,12 +377,12 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 
 	if (dev->net->flags & IFF_PROMISC) {
 		if (netif_msg_drv(dev))
-			devdbg(dev, "promiscuous mode enabled");
+			netdev_dbg(dev->net, "promiscuous mode enabled\n");
 		pdata->mac_cr |= MAC_CR_PRMS_;
 		pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
 	} else if (dev->net->flags & IFF_ALLMULTI) {
 		if (netif_msg_drv(dev))
-			devdbg(dev, "receive all multicast enabled");
+			netdev_dbg(dev->net, "receive all multicast enabled\n");
 		pdata->mac_cr |= MAC_CR_MCPAS_;
 		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
 	} else if (!netdev_mc_empty(dev->net)) {
@@ -401,20 +402,20 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 				else
 					hash_lo |= mask;
 			} else {
-				devwarn(dev, "dmi_addrlen != 6");
+				netdev_warn(dev->net, "dmi_addrlen != 6\n");
 			}
 			mc_list = mc_list->next;
 		}
 
 		if (count != ((u32) netdev_mc_count(dev->net)))
-			devwarn(dev, "mc_count != dev->mc_count");
+			netdev_warn(dev->net, "mc_count != dev->mc_count\n");
 
 		if (netif_msg_drv(dev))
-			devdbg(dev, "HASHH=0x%08X, HASHL=0x%08X", hash_hi,
-				hash_lo);
+			netdev_dbg(dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
+				   hash_hi, hash_lo);
 	} else {
 		if (netif_msg_drv(dev))
-			devdbg(dev, "receive own packets only");
+			netdev_dbg(dev->net, "receive own packets only\n");
 		pdata->mac_cr &=
 			~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
 	}
@@ -434,7 +435,7 @@ static void smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
 
 	int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
 	if (ret < 0) {
-		devwarn(dev, "error reading AFC_CFG");
+		netdev_warn(dev->net, "error reading AFC_CFG\n");
 		return;
 	}
 
@@ -452,12 +453,12 @@ static void smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
 			afc_cfg &= ~0xF;
 
 		if (netif_msg_link(dev))
-			devdbg(dev, "rx pause %s, tx pause %s",
-				(cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
-				(cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+			netdev_dbg(dev->net, "rx pause %s, tx pause %s\n",
+				   cap & FLOW_CTRL_RX ? "enabled" : "disabled",
+				   cap & FLOW_CTRL_TX ? "enabled" : "disabled");
 	} else {
 		if (netif_msg_link(dev))
-			devdbg(dev, "half duplex");
+			netdev_dbg(dev->net, "half duplex\n");
 		flow = 0;
 		afc_cfg |= 0xF;
 	}
@@ -486,8 +487,8 @@ static int smsc95xx_link_reset(struct usbnet *dev)
 	rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 
 	if (netif_msg_link(dev))
-		devdbg(dev, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x",
-			ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+		netdev_dbg(dev->net, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x\n",
+			   ecmd.speed, ecmd.duplex, lcladv, rmtadv);
 
 	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
 	if (ecmd.duplex != DUPLEX_FULL) {
@@ -511,7 +512,8 @@ static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
 	u32 intdata;
 
 	if (urb->actual_length != 4) {
-		devwarn(dev, "unexpected urb length %d", urb->actual_length);
+		netdev_warn(dev->net, "unexpected urb length %d\n",
+			    urb->actual_length);
 		return;
 	}
 
@@ -519,12 +521,13 @@ static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
 	le32_to_cpus(&intdata);
 
 	if (netif_msg_link(dev))
-		devdbg(dev, "intdata: 0x%08X", intdata);
+		netdev_dbg(dev->net, "intdata: 0x%08X\n", intdata);
 
 	if (intdata & INT_ENP_PHY_INT_)
 		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
 	else
-		devwarn(dev, "unexpected interrupt, intdata=0x%08X", intdata);
+		netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+			    intdata);
 }
 
 /* Enable or disable Tx & Rx checksum offload engines */
@@ -534,7 +537,7 @@ static int smsc95xx_set_csums(struct usbnet *dev)
 	u32 read_buf;
 	int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read COE_CR: %d", ret);
+		netdev_warn(dev->net, "Failed to read COE_CR: %d\n", ret);
 		return ret;
 	}
 
@@ -550,12 +553,12 @@ static int smsc95xx_set_csums(struct usbnet *dev)
 
 	ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write COE_CR: %d", ret);
+		netdev_warn(dev->net, "Failed to write COE_CR: %d\n", ret);
 		return ret;
 	}
 
 	if (netif_msg_hw(dev))
-		devdbg(dev, "COE_CR = 0x%08x", read_buf);
+		netdev_dbg(dev->net, "COE_CR = 0x%08x\n", read_buf);
 	return 0;
 }
 
@@ -580,8 +583,8 @@ static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
 	struct usbnet *dev = netdev_priv(netdev);
 
 	if (ee->magic != LAN95XX_EEPROM_MAGIC) {
-		devwarn(dev, "EEPROM: magic value mismatch, magic = 0x%x",
-			ee->magic);
+		netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
+			    ee->magic);
 		return -EINVAL;
 	}
 
@@ -660,7 +663,7 @@ static void smsc95xx_init_mac_address(struct usbnet *dev)
 		if (is_valid_ether_addr(dev->net->dev_addr)) {
 			/* eeprom values are valid so use them */
 			if (netif_msg_ifup(dev))
-				devdbg(dev, "MAC address read from EEPROM");
+				netdev_dbg(dev->net, "MAC address read from EEPROM\n");
 			return;
 		}
 	}
@@ -668,7 +671,7 @@ static void smsc95xx_init_mac_address(struct usbnet *dev)
 	/* no eeprom, or eeprom values are invalid. generate random MAC */
 	random_ether_addr(dev->net->dev_addr);
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "MAC address set to random_ether_addr");
+		netdev_dbg(dev->net, "MAC address set to random_ether_addr\n");
 }
 
 static int smsc95xx_set_mac_address(struct usbnet *dev)
@@ -680,13 +683,13 @@ static int smsc95xx_set_mac_address(struct usbnet *dev)
 
 	ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write ADDRL: %d", ret);
+		netdev_warn(dev->net, "Failed to write ADDRL: %d\n", ret);
 		return ret;
 	}
 
 	ret = smsc95xx_write_reg(dev, ADDRH, addr_hi);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write ADDRH: %d", ret);
+		netdev_warn(dev->net, "Failed to write ADDRH: %d\n", ret);
 		return ret;
 	}
 
@@ -748,7 +751,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
 	mii_nway_restart(&dev->mii);
 
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "phy initialised successfully");
+		netdev_dbg(dev->net, "phy initialised successfully\n");
 	return 0;
 }
 
@@ -760,13 +763,13 @@ static int smsc95xx_reset(struct usbnet *dev)
 	int ret = 0, timeout;
 
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "entering smsc95xx_reset");
+		netdev_dbg(dev->net, "entering smsc95xx_reset\n");
 
 	write_buf = HW_CFG_LRST_;
 	ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write HW_CFG_LRST_ bit in HW_CFG "
-			"register, ret = %d", ret);
+		netdev_warn(dev->net, "Failed to write HW_CFG_LRST_ bit in HW_CFG register, ret = %d\n",
+			    ret);
 		return ret;
 	}
 
@@ -774,7 +777,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	do {
 		ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 		if (ret < 0) {
-			devwarn(dev, "Failed to read HW_CFG: %d", ret);
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 			return ret;
 		}
 		msleep(10);
@@ -782,14 +785,14 @@ static int smsc95xx_reset(struct usbnet *dev)
 	} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
 
 	if (timeout >= 100) {
-		devwarn(dev, "timeout waiting for completion of Lite Reset");
+		netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
 		return ret;
 	}
 
 	write_buf = PM_CTL_PHY_RST_;
 	ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write PM_CTRL: %d", ret);
+		netdev_warn(dev->net, "Failed to write PM_CTRL: %d\n", ret);
 		return ret;
 	}
 
@@ -797,7 +800,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	do {
 		ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
 		if (ret < 0) {
-			devwarn(dev, "Failed to read PM_CTRL: %d", ret);
+			netdev_warn(dev->net, "Failed to read PM_CTRL: %d\n", ret);
 			return ret;
 		}
 		msleep(10);
@@ -805,7 +808,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
 
 	if (timeout >= 100) {
-		devwarn(dev, "timeout waiting for PHY Reset");
+		netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
 		return ret;
 	}
 
@@ -816,34 +819,34 @@ static int smsc95xx_reset(struct usbnet *dev)
 		return ret;
 
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "MAC Address: %pM", dev->net->dev_addr);
+		netdev_dbg(dev->net, "MAC Address: %pM\n", dev->net->dev_addr);
 
 	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read HW_CFG: %d", ret);
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
 
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "Read Value from HW_CFG : 0x%08x", read_buf);
+		netdev_dbg(dev->net, "Read Value from HW_CFG : 0x%08x\n", read_buf);
 
 	read_buf |= HW_CFG_BIR_;
 
 	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write HW_CFG_BIR_ bit in HW_CFG "
-			"register, ret = %d", ret);
+		netdev_warn(dev->net, "Failed to write HW_CFG_BIR_ bit in HW_CFG register, ret = %d\n",
+			    ret);
 		return ret;
 	}
 
 	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read HW_CFG: %d", ret);
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "Read Value from HW_CFG after writing "
-			"HW_CFG_BIR_: 0x%08x", read_buf);
+		netdev_dbg(dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
+			   read_buf);
 
 	if (!turbo_mode) {
 		burst_cap = 0;
@@ -857,46 +860,46 @@ static int smsc95xx_reset(struct usbnet *dev)
 	}
 
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "rx_urb_size=%ld", (ulong)dev->rx_urb_size);
+		netdev_dbg(dev->net, "rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
 
 	ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write BURST_CAP: %d", ret);
+		netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret);
 		return ret;
 	}
 
 	ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read BURST_CAP: %d", ret);
+		netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret);
 		return ret;
 	}
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "Read Value from BURST_CAP after writing: 0x%08x",
-			read_buf);
+		netdev_dbg(dev->net, "Read Value from BURST_CAP after writing: 0x%08x\n",
+			   read_buf);
 
 	read_buf = DEFAULT_BULK_IN_DELAY;
 	ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
 	if (ret < 0) {
-		devwarn(dev, "ret = %d", ret);
+		netdev_warn(dev->net, "ret = %d\n", ret);
 		return ret;
 	}
 
 	ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read BULK_IN_DLY: %d", ret);
+		netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret);
 		return ret;
 	}
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "Read Value from BULK_IN_DLY after writing: "
-			"0x%08x", read_buf);
+		netdev_dbg(dev->net, "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
+			   read_buf);
 
 	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read HW_CFG: %d", ret);
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "Read Value from HW_CFG: 0x%08x", read_buf);
+		netdev_dbg(dev->net, "Read Value from HW_CFG: 0x%08x\n", read_buf);
 
 	if (turbo_mode)
 		read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
@@ -908,41 +911,43 @@ static int smsc95xx_reset(struct usbnet *dev)
 
 	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write HW_CFG register, ret=%d", ret);
+		netdev_warn(dev->net, "Failed to write HW_CFG register, ret=%d\n",
+			    ret);
 		return ret;
 	}
 
 	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read HW_CFG: %d", ret);
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "Read Value from HW_CFG after writing: 0x%08x",
-			read_buf);
+		netdev_dbg(dev->net, "Read Value from HW_CFG after writing: 0x%08x\n",
+			   read_buf);
 
 	write_buf = 0xFFFFFFFF;
 	ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write INT_STS register, ret=%d", ret);
+		netdev_warn(dev->net, "Failed to write INT_STS register, ret=%d\n",
+			    ret);
 		return ret;
 	}
 
 	ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read ID_REV: %d", ret);
+		netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret);
 		return ret;
 	}
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "ID_REV = 0x%08x", read_buf);
+		netdev_dbg(dev->net, "ID_REV = 0x%08x\n", read_buf);
 
 	/* Configure GPIO pins as LED outputs */
 	write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
 		LED_GPIO_CFG_FDX_LED;
 	ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d",
-			ret);
+		netdev_warn(dev->net, "Failed to write LED_GPIO_CFG register, ret=%d\n",
+			    ret);
 		return ret;
 	}
 
@@ -950,21 +955,21 @@ static int smsc95xx_reset(struct usbnet *dev)
 	write_buf = 0;
 	ret = smsc95xx_write_reg(dev, FLOW, write_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write FLOW: %d", ret);
+		netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret);
 		return ret;
 	}
 
 	read_buf = AFC_CFG_DEFAULT;
 	ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write AFC_CFG: %d", ret);
+		netdev_warn(dev->net, "Failed to write AFC_CFG: %d\n", ret);
 		return ret;
 	}
 
 	/* Don't need mac_cr_lock during initialisation */
 	ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read MAC_CR: %d", ret);
+		netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret);
 		return ret;
 	}
 
@@ -973,7 +978,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	write_buf = (u32)ETH_P_8021Q;
 	ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write VAN1: %d", ret);
+		netdev_warn(dev->net, "Failed to write VAN1: %d\n", ret);
 		return ret;
 	}
 
@@ -981,7 +986,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	ethtool_op_set_tx_hw_csum(netdev, pdata->use_tx_csum);
 	ret = smsc95xx_set_csums(dev);
 	if (ret < 0) {
-		devwarn(dev, "Failed to set csum offload: %d", ret);
+		netdev_warn(dev->net, "Failed to set csum offload: %d\n", ret);
 		return ret;
 	}
 
@@ -992,7 +997,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 
 	ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to read INT_EP_CTL: %d", ret);
+		netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret);
 		return ret;
 	}
 
@@ -1001,7 +1006,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 
 	ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
 	if (ret < 0) {
-		devwarn(dev, "Failed to write INT_EP_CTL: %d", ret);
+		netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret);
 		return ret;
 	}
 
@@ -1009,7 +1014,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	smsc95xx_start_rx_path(dev);
 
 	if (netif_msg_ifup(dev))
-		devdbg(dev, "smsc95xx_reset, return 0");
+		netdev_dbg(dev->net, "smsc95xx_reset, return 0\n");
 	return 0;
 }
 
@@ -1034,7 +1039,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	ret = usbnet_get_endpoints(dev, intf);
 	if (ret < 0) {
-		devwarn(dev, "usbnet_get_endpoints failed: %d", ret);
+		netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1043,7 +1048,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	if (!pdata) {
-		devwarn(dev, "Unable to allocate struct smsc95xx_priv");
+		netdev_warn(dev->net, "Unable to allocate struct smsc95xx_priv\n");
 		return -ENOMEM;
 	}
 
@@ -1067,7 +1072,7 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	if (pdata) {
 		if (netif_msg_ifdown(dev))
-			devdbg(dev, "free pdata");
+			netdev_dbg(dev->net, "free pdata\n");
 		kfree(pdata);
 		pdata = NULL;
 		dev->data[0] = 0;
@@ -1102,7 +1107,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 		if (unlikely(header & RX_STS_ES_)) {
 			if (netif_msg_rx_err(dev))
-				devdbg(dev, "Error header=0x%08x", header);
+				netdev_dbg(dev->net, "Error header=0x%08x\n",
+					   header);
 			dev->net->stats.rx_errors++;
 			dev->net->stats.rx_dropped++;
 
@@ -1120,8 +1126,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
 			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
 				if (netif_msg_rx_err(dev))
-					devdbg(dev, "size err header=0x%08x",
-						header);
+					netdev_dbg(dev->net, "size err header=0x%08x\n",
+						   header);
 				return 0;
 			}
 
@@ -1137,7 +1143,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 			ax_skb = skb_clone(skb, GFP_ATOMIC);
 			if (unlikely(!ax_skb)) {
-				devwarn(dev, "Error allocating skb");
+				netdev_warn(dev->net, "Error allocating skb\n");
 				return 0;
 			}
 
@@ -1161,7 +1167,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	}
 
 	if (unlikely(skb->len < 0)) {
-		devwarn(dev, "invalid rx length<0 %d", skb->len);
+		netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len);
 		return 0;
 	}
 
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 035fab04c0a0..8e732930d249 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -243,12 +243,12 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
 	dev->net->stats.rx_bytes += skb->len;
 
 	if (netif_msg_rx_status (dev))
-		devdbg (dev, "< rx, len %zu, type 0x%x",
-			skb->len + sizeof (struct ethhdr), skb->protocol);
+		netdev_dbg(dev->net, "< rx, len %zu, type 0x%x\n",
+			   skb->len + sizeof (struct ethhdr), skb->protocol);
 	memset (skb->cb, 0, sizeof (struct skb_data));
 	status = netif_rx (skb);
 	if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
-		devdbg (dev, "netif_rx status %d", status);
+		netdev_dbg(dev->net, "netif_rx status %d\n", status);
 }
 EXPORT_SYMBOL_GPL(usbnet_skb_return);
 
@@ -313,9 +313,9 @@ void usbnet_defer_kevent (struct usbnet *dev, int work)
 {
 	set_bit (work, &dev->flags);
 	if (!schedule_work (&dev->kevent))
-		deverr (dev, "kevent %d may have been dropped", work);
+		netdev_err(dev->net, "kevent %d may have been dropped\n", work);
 	else
-		devdbg (dev, "kevent %d scheduled", work);
+		netdev_dbg(dev->net, "kevent %d scheduled\n", work);
 }
 EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
 
@@ -333,7 +333,7 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 
 	if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
 		if (netif_msg_rx_err (dev))
-			devdbg (dev, "no rx skb");
+			netdev_dbg(dev->net, "no rx skb\n");
 		usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
 		usb_free_urb (urb);
 		return;
@@ -364,12 +364,12 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 			break;
 		case -ENODEV:
 			if (netif_msg_ifdown (dev))
-				devdbg (dev, "device gone");
+				netdev_dbg(dev->net, "device gone\n");
 			netif_device_detach (dev->net);
 			break;
 		default:
 			if (netif_msg_rx_err (dev))
-				devdbg (dev, "rx submit, %d", retval);
+				netdev_dbg(dev->net, "rx submit, %d\n", retval);
 			tasklet_schedule (&dev->bh);
 			break;
 		case 0:
@@ -377,7 +377,7 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 		}
 	} else {
 		if (netif_msg_ifdown (dev))
-			devdbg (dev, "rx: stopped");
+			netdev_dbg(dev->net, "rx: stopped\n");
 		retval = -ENOLINK;
 	}
 	spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
@@ -401,7 +401,7 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 		usbnet_skb_return (dev, skb);
 	else {
 		if (netif_msg_rx_err (dev))
-			devdbg (dev, "drop");
+			netdev_dbg(dev->net, "drop\n");
 error:
 		dev->net->stats.rx_errors++;
 		skb_queue_tail (&dev->done, skb);
@@ -429,7 +429,7 @@ static void rx_complete (struct urb *urb)
 			dev->net->stats.rx_errors++;
 			dev->net->stats.rx_length_errors++;
 			if (netif_msg_rx_err (dev))
-				devdbg (dev, "rx length %d", skb->len);
+				netdev_dbg(dev->net, "rx length %d\n", skb->len);
 		}
 		break;
 
@@ -447,7 +447,7 @@ static void rx_complete (struct urb *urb)
 	case -ECONNRESET:		/* async unlink */
 	case -ESHUTDOWN:		/* hardware gone */
 		if (netif_msg_ifdown (dev))
-			devdbg (dev, "rx shutdown, code %d", urb_status);
+			netdev_dbg(dev->net, "rx shutdown, code %d\n", urb_status);
 		goto block;
 
 	/* we get controller i/o faults during khubd disconnect() delays.
@@ -461,7 +461,7 @@ static void rx_complete (struct urb *urb)
 		if (!timer_pending (&dev->delay)) {
 			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
 			if (netif_msg_link (dev))
-				devdbg (dev, "rx throttle %d", urb_status);
+				netdev_dbg(dev->net, "rx throttle %d\n", urb_status);
 		}
 block:
 		entry->state = rx_cleanup;
@@ -478,7 +478,7 @@ block:
 		entry->state = rx_cleanup;
 		dev->net->stats.rx_errors++;
 		if (netif_msg_rx_err (dev))
-			devdbg (dev, "rx status %d", urb_status);
+			netdev_dbg(dev->net, "rx status %d\n", urb_status);
 		break;
 	}
 
@@ -493,7 +493,7 @@ block:
 		usb_free_urb (urb);
 	}
 	if (netif_msg_rx_err (dev))
-		devdbg (dev, "no read resubmitted");
+		netdev_dbg(dev->net, "no read resubmitted\n");
 }
 
 static void intr_complete (struct urb *urb)
@@ -511,14 +511,14 @@ static void intr_complete (struct urb *urb)
 	case -ENOENT:		/* urb killed */
 	case -ESHUTDOWN:	/* hardware gone */
 		if (netif_msg_ifdown (dev))
-			devdbg (dev, "intr shutdown, code %d", status);
+			netdev_dbg(dev->net, "intr shutdown, code %d\n", status);
 		return;
 
 	/* NOTE:  not throttling like RX/TX, since this endpoint
 	 * already polls infrequently
 	 */
 	default:
-		devdbg (dev, "intr status %d", status);
+		netdev_dbg(dev->net, "intr status %d\n", status);
 		break;
 	}
 
@@ -528,7 +528,7 @@ static void intr_complete (struct urb *urb)
 	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
 	status = usb_submit_urb (urb, GFP_ATOMIC);
 	if (status != 0 && netif_msg_timer (dev))
-		deverr(dev, "intr resubmit --> %d", status);
+		netdev_err(dev->net, "intr resubmit --> %d\n", status);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -537,7 +537,7 @@ void usbnet_pause_rx(struct usbnet *dev)
 	set_bit(EVENT_RX_PAUSED, &dev->flags);
 
 	if (netif_msg_rx_status(dev))
-		devdbg(dev, "paused rx queue enabled");
+		netdev_dbg(dev->net, "paused rx queue enabled\n");
 }
 EXPORT_SYMBOL_GPL(usbnet_pause_rx);
 
@@ -556,7 +556,8 @@ void usbnet_resume_rx(struct usbnet *dev)
 	tasklet_schedule(&dev->bh);
 
 	if (netif_msg_rx_status(dev))
-		devdbg(dev, "paused rx queue disabled, %d skbs requeued", num);
+		netdev_dbg(dev->net, "paused rx queue disabled, %d skbs requeued\n",
+			   num);
 }
 EXPORT_SYMBOL_GPL(usbnet_resume_rx);
 
@@ -589,7 +590,7 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
 		// these (async) unlinks complete immediately
 		retval = usb_unlink_urb (urb);
 		if (retval != -EINPROGRESS && retval != 0)
-			devdbg (dev, "unlink urb err, %d", retval);
+			netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
 		else
 			count++;
 	}
@@ -632,8 +633,8 @@ static void usbnet_terminate_urbs(struct usbnet *dev)
 			schedule_timeout(UNLINK_TIMEOUT_MS);
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			if (netif_msg_ifdown(dev))
-				devdbg(dev, "waited for %d urb completions",
-					temp);
+				netdev_dbg(dev->net, "waited for %d urb completions\n",
+					   temp);
 	}
 	set_current_state(TASK_RUNNING);
 	dev->wait = NULL;
@@ -649,21 +650,20 @@ int usbnet_stop (struct net_device *net)
 	netif_stop_queue (net);
 
 	if (netif_msg_ifdown (dev))
-		devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
-			net->stats.rx_packets, net->stats.tx_packets,
-			net->stats.rx_errors, net->stats.tx_errors
-			);
+		netdev_info(dev->net, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
+			    net->stats.rx_packets, net->stats.tx_packets,
+			    net->stats.rx_errors, net->stats.tx_errors);
 
 	/* allow minidriver to stop correctly (wireless devices to turn off
 	 * radio etc) */
 	if (info->stop) {
 		retval = info->stop(dev);
 		if (retval < 0 && netif_msg_ifdown(dev))
-			devinfo(dev,
-				"stop fail (%d) usbnet usb-%s-%s, %s",
-				retval,
-				dev->udev->bus->bus_name, dev->udev->devpath,
-				info->description);
+			netdev_info(dev->net,
+				    "stop fail (%d) usbnet usb-%s-%s, %s\n",
+				    retval,
+				    dev->udev->bus->bus_name, dev->udev->devpath,
+				    info->description);
 	}
 
 	if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
@@ -703,29 +703,31 @@ int usbnet_open (struct net_device *net)
 
 	if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
 		if (netif_msg_ifup (dev))
-			devinfo (dev,
-				"resumption fail (%d) usbnet usb-%s-%s, %s",
-				retval,
-				dev->udev->bus->bus_name, dev->udev->devpath,
-			info->description);
+			netdev_info(dev->net,
+				    "resumption fail (%d) usbnet usb-%s-%s, %s\n",
+				    retval,
+				    dev->udev->bus->bus_name,
+				    dev->udev->devpath,
+				    info->description);
 		goto done_nopm;
 	}
 
 	// put into "known safe" state
 	if (info->reset && (retval = info->reset (dev)) < 0) {
 		if (netif_msg_ifup (dev))
-			devinfo (dev,
-				"open reset fail (%d) usbnet usb-%s-%s, %s",
-				retval,
-				dev->udev->bus->bus_name, dev->udev->devpath,
-			info->description);
+			netdev_info(dev->net,
+				    "open reset fail (%d) usbnet usb-%s-%s, %s\n",
+				    retval,
+				    dev->udev->bus->bus_name,
+				    dev->udev->devpath,
+				    info->description);
 		goto done;
 	}
 
 	// insist peer be connected
 	if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
 		if (netif_msg_ifup (dev))
-			devdbg (dev, "can't open; %d", retval);
+			netdev_dbg(dev->net, "can't open; %d\n", retval);
 		goto done;
 	}
 
@@ -734,7 +736,7 @@ int usbnet_open (struct net_device *net)
 		retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
 		if (retval < 0) {
 			if (netif_msg_ifup (dev))
-				deverr (dev, "intr submit %d", retval);
+				netdev_err(dev->net, "intr submit %d\n", retval);
 			goto done;
 		}
 	}
@@ -756,10 +758,9 @@ int usbnet_open (struct net_device *net)
 		else
 			framing = "simple";
 
-		devinfo (dev, "open: enable queueing "
-				"(rx %d, tx %d) mtu %d %s framing",
-			(int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu,
-			framing);
+		netdev_info(dev->net, "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
+			    (int)RX_QLEN(dev), (int)TX_QLEN(dev),
+			    dev->net->mtu, framing);
 	}
 
 	// delay posting reads until we're fully open
@@ -908,8 +909,8 @@ kevent (struct work_struct *work)
 		    status != -ESHUTDOWN) {
 			if (netif_msg_tx_err (dev))
 fail_pipe:
-				deverr (dev, "can't clear tx halt, status %d",
-					status);
+				netdev_err(dev->net, "can't clear tx halt, status %d\n",
+					   status);
 		} else {
 			clear_bit (EVENT_TX_HALT, &dev->flags);
 			if (status != -ESHUTDOWN)
@@ -928,8 +929,8 @@ fail_pipe:
 		    status != -ESHUTDOWN) {
 			if (netif_msg_rx_err (dev))
 fail_halt:
-				deverr (dev, "can't clear rx halt, status %d",
-					status);
+				netdev_err(dev->net, "can't clear rx halt, status %d\n",
+					   status);
 		} else {
 			clear_bit (EVENT_RX_HALT, &dev->flags);
 			tasklet_schedule (&dev->bh);
@@ -967,18 +968,18 @@ fail_lowmem:
 		if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
 			usb_autopm_put_interface(dev->intf);
 skip_reset:
-			devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s",
-				retval,
-				dev->udev->bus->bus_name, dev->udev->devpath,
-				info->description);
+			netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
+				    retval,
+				    dev->udev->bus->bus_name,
+				    dev->udev->devpath,
+				    info->description);
 		} else {
 			usb_autopm_put_interface(dev->intf);
 		}
 	}
 
 	if (dev->flags)
-		devdbg (dev, "kevent done, flags = 0x%lx",
-			dev->flags);
+		netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1015,14 +1016,15 @@ static void tx_complete (struct urb *urb)
 				mod_timer (&dev->delay,
 					jiffies + THROTTLE_JIFFIES);
 				if (netif_msg_link (dev))
-					devdbg (dev, "tx throttle %d",
-							urb->status);
+					netdev_dbg(dev->net, "tx throttle %d\n",
+						   urb->status);
 			}
 			netif_stop_queue (dev->net);
 			break;
 		default:
 			if (netif_msg_tx_err (dev))
-				devdbg (dev, "tx err %d", entry->urb->status);
+				netdev_dbg(dev->net, "tx err %d\n",
+					   entry->urb->status);
 			break;
 		}
 	}
@@ -1065,7 +1067,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
 		if (!skb) {
 			if (netif_msg_tx_err (dev))
-				devdbg (dev, "can't tx_fixup skb");
+				netdev_dbg(dev->net, "can't tx_fixup skb\n");
 			goto drop;
 		}
 	}
@@ -1073,7 +1075,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 
 	if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
 		if (netif_msg_tx_err (dev))
-			devdbg (dev, "no urb");
+			netdev_dbg(dev->net, "no urb\n");
 		goto drop;
 	}
 
@@ -1113,7 +1115,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 		/* no use to process more packets */
 		netif_stop_queue(net);
 		spin_unlock_irqrestore(&dev->txq.lock, flags);
-		devdbg(dev, "Delaying transmission for resumption");
+		netdev_dbg(dev->net, "Delaying transmission for resumption\n");
 		goto deferred;
 	}
 #endif
@@ -1127,7 +1129,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 	default:
 		usb_autopm_put_interface_async(dev->intf);
 		if (netif_msg_tx_err (dev))
-			devdbg (dev, "tx: submit urb err %d", retval);
+			netdev_dbg(dev->net, "tx: submit urb err %d\n", retval);
 		break;
 	case 0:
 		net->trans_start = jiffies;
@@ -1139,15 +1141,15 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 
 	if (retval) {
 		if (netif_msg_tx_err (dev))
-			devdbg (dev, "drop, code %d", retval);
+			netdev_dbg(dev->net, "drop, code %d\n", retval);
 drop:
 		dev->net->stats.tx_dropped++;
 		if (skb)
 			dev_kfree_skb_any (skb);
 		usb_free_urb (urb);
 	} else if (netif_msg_tx_queued (dev)) {
-		devdbg (dev, "> tx, len %d, type 0x%x",
-			length, skb->protocol);
+		netdev_dbg(dev->net, "> tx, len %d, type 0x%x\n",
+			   length, skb->protocol);
 	}
 #ifdef CONFIG_PM
 deferred:
@@ -1179,7 +1181,7 @@ static void usbnet_bh (unsigned long param)
 			dev_kfree_skb (skb);
 			continue;
 		default:
-			devdbg (dev, "bogus skb state %d", entry->state);
+			netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
 		}
 	}
 
@@ -1208,8 +1210,8 @@ static void usbnet_bh (unsigned long param)
 					rx_submit (dev, urb, GFP_ATOMIC);
 			}
 			if (temp != dev->rxq.qlen && netif_msg_link (dev))
-				devdbg (dev, "rxqlen %d --> %d",
-						temp, dev->rxq.qlen);
+				netdev_dbg(dev->net, "rxqlen %d --> %d\n",
+					   temp, dev->rxq.qlen);
 			if (dev->rxq.qlen < qlen)
 				tasklet_schedule (&dev->bh);
 		}
@@ -1241,10 +1243,10 @@ void usbnet_disconnect (struct usb_interface *intf)
 	xdev = interface_to_usbdev (intf);
 
 	if (netif_msg_probe (dev))
-		devinfo (dev, "unregister '%s' usb-%s-%s, %s",
-			intf->dev.driver->name,
-			xdev->bus->bus_name, xdev->devpath,
-			dev->driver_info->description);
+		netdev_info(dev->net, "unregister '%s' usb-%s-%s, %s\n",
+			    intf->dev.driver->name,
+			    xdev->bus->bus_name, xdev->devpath,
+			    dev->driver_info->description);
 
 	net = dev->net;
 	unregister_netdev (net);
@@ -1408,11 +1410,11 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	if (status)
 		goto out3;
 	if (netif_msg_probe (dev))
-		devinfo (dev, "register '%s' at usb-%s-%s, %s, %pM",
-			udev->dev.driver->name,
-			xdev->bus->bus_name, xdev->devpath,
-			dev->driver_info->description,
-			net->dev_addr);
+		netdev_info(dev->net, "register '%s' at usb-%s-%s, %s, %pM\n",
+			    udev->dev.driver->name,
+			    xdev->bus->bus_name, xdev->devpath,
+			    dev->driver_info->description,
+			    net->dev_addr);
 
 	// ok, it's ready to go.
 	usb_set_intfdata (udev, dev);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 14692bc51b51..65cbd060cc30 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -728,9 +728,9 @@ static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
 	ret = rndis_command(dev, u.header, buflen);
 	priv->current_command_oid = 0;
 	if (ret < 0)
-		devdbg(dev, "rndis_query_oid(%s): rndis_command() failed, %d "
-			"(%08x)", oid_to_string(oid), ret,
-			le32_to_cpu(u.get_c->status));
+		netdev_dbg(dev->net, "%s(%s): rndis_command() failed, %d (%08x)\n",
+			   __func__, oid_to_string(oid), ret,
+			   le32_to_cpu(u.get_c->status));
 
 	if (ret == 0) {
 		memcpy(data, u.buf + le32_to_cpu(u.get_c->offset) + 8, *len);
@@ -741,9 +741,9 @@ static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
 
 		ret = rndis_error_status(u.get_c->status);
 		if (ret < 0)
-			devdbg(dev, "rndis_query_oid(%s): device returned "
-				"error,  0x%08x (%d)", oid_to_string(oid),
-				le32_to_cpu(u.get_c->status), ret);
+			netdev_dbg(dev->net, "%s(%s): device returned error,  0x%08x (%d)\n",
+				   __func__, oid_to_string(oid),
+				   le32_to_cpu(u.get_c->status), ret);
 	}
 
 	mutex_unlock(&priv->command_lock);
@@ -791,17 +791,17 @@ static int rndis_set_oid(struct usbnet *dev, __le32 oid, void *data, int len)
 	ret = rndis_command(dev, u.header, buflen);
 	priv->current_command_oid = 0;
 	if (ret < 0)
-		devdbg(dev, "rndis_set_oid(%s): rndis_command() failed, %d "
-			"(%08x)", oid_to_string(oid), ret,
-			le32_to_cpu(u.set_c->status));
+		netdev_dbg(dev->net, "%s(%s): rndis_command() failed, %d (%08x)\n",
+			   __func__, oid_to_string(oid), ret,
+			   le32_to_cpu(u.set_c->status));
 
 	if (ret == 0) {
 		ret = rndis_error_status(u.set_c->status);
 
 		if (ret < 0)
-			devdbg(dev, "rndis_set_oid(%s): device returned error, "
-				"0x%08x (%d)", oid_to_string(oid),
-				le32_to_cpu(u.set_c->status), ret);
+			netdev_dbg(dev->net, "%s(%s): device returned error, 0x%08x (%d)\n",
+				   __func__, oid_to_string(oid),
+				   le32_to_cpu(u.set_c->status), ret);
 	}
 
 	mutex_unlock(&priv->command_lock);
@@ -870,11 +870,11 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
 #endif
 
 	if (value_type == 2)
-		devdbg(dev, "setting config parameter: %s, value: %s",
-						param, (u8 *)value);
+		netdev_dbg(dev->net, "setting config parameter: %s, value: %s\n",
+			   param, (u8 *)value);
 	else
-		devdbg(dev, "setting config parameter: %s, value: %d",
-						param, *(u32 *)value);
+		netdev_dbg(dev->net, "setting config parameter: %s, value: %d\n",
+			   param, *(u32 *)value);
 
 	infobuf->name_offs = cpu_to_le32(sizeof(*infobuf));
 	infobuf->name_length = cpu_to_le32(param_len);
@@ -897,20 +897,21 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
 	}
 
 #ifdef DEBUG
-	devdbg(dev, "info buffer (len: %d):", info_len);
+	netdev_dbg(dev->net, "info buffer (len: %d)\n", info_len);
 	for (i = 0; i < info_len; i += 12) {
 		u32 *tmp = (u32 *)((u8 *)infobuf + i);
-		devdbg(dev, "%08X:%08X:%08X",
-			cpu_to_be32(tmp[0]),
-			cpu_to_be32(tmp[1]),
-			cpu_to_be32(tmp[2]));
+		netdev_dbg(dev->net, "%08X:%08X:%08X\n",
+			   cpu_to_be32(tmp[0]),
+			   cpu_to_be32(tmp[1]),
+			   cpu_to_be32(tmp[2]));
 	}
 #endif
 
 	ret = rndis_set_oid(dev, OID_GEN_RNDIS_CONFIG_PARAMETER,
 							infobuf, info_len);
 	if (ret != 0)
-		devdbg(dev, "setting rndis config parameter failed, %d.", ret);
+		netdev_dbg(dev->net, "setting rndis config parameter failed, %d\n",
+			   ret);
 
 	kfree(infobuf);
 	return ret;
@@ -945,13 +946,13 @@ static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 
 	ret = rndis_set_oid(usbdev, OID_802_11_SSID, ssid, sizeof(*ssid));
 	if (ret < 0) {
-		devwarn(usbdev, "setting SSID failed (%08X)", ret);
+		netdev_warn(usbdev->net, "setting SSID failed (%08X)\n", ret);
 		return ret;
 	}
 	if (ret == 0) {
 		memcpy(&priv->essid, ssid, sizeof(priv->essid));
 		priv->radio_on = true;
-		devdbg(usbdev, "set_essid: radio_on = true");
+		netdev_dbg(usbdev->net, "%s(): radio_on = true\n", __func__);
 	}
 
 	return ret;
@@ -963,7 +964,8 @@ static int set_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN])
 
 	ret = rndis_set_oid(usbdev, OID_802_11_BSSID, bssid, ETH_ALEN);
 	if (ret < 0) {
-		devwarn(usbdev, "setting BSSID[%pM] failed (%08X)", bssid, ret);
+		netdev_warn(usbdev->net, "setting BSSID[%pM] failed (%08X)\n",
+			    bssid, ret);
 		return ret;
 	}
 
@@ -1021,7 +1023,8 @@ static int disassociate(struct usbnet *usbdev, bool reset_ssid)
 		ret = rndis_set_oid(usbdev, OID_802_11_DISASSOCIATE, NULL, 0);
 		if (ret == 0) {
 			priv->radio_on = false;
-			devdbg(usbdev, "disassociate: radio_on = false");
+			netdev_dbg(usbdev->net, "%s(): radio_on = false\n",
+				   __func__);
 
 			if (reset_ssid)
 				msleep(100);
@@ -1054,8 +1057,8 @@ static int set_auth_mode(struct usbnet *usbdev, u32 wpa_version,
 	__le32 tmp;
 	int auth_mode, ret;
 
-	devdbg(usbdev, "set_auth_mode: wpa_version=0x%x authalg=0x%x "
-		"keymgmt=0x%x", wpa_version, auth_type, keymgmt);
+	netdev_dbg(usbdev->net, "%s(): wpa_version=0x%x authalg=0x%x keymgmt=0x%x\n",
+		   __func__, wpa_version, auth_type, keymgmt);
 
 	if (wpa_version & NL80211_WPA_VERSION_2) {
 		if (keymgmt & RNDIS_WLAN_KEY_MGMT_802_1X)
@@ -1082,7 +1085,8 @@ static int set_auth_mode(struct usbnet *usbdev, u32 wpa_version,
 	ret = rndis_set_oid(usbdev, OID_802_11_AUTHENTICATION_MODE, &tmp,
 								sizeof(tmp));
 	if (ret != 0) {
-		devwarn(usbdev, "setting auth mode failed (%08X)", ret);
+		netdev_warn(usbdev->net, "setting auth mode failed (%08X)\n",
+			    ret);
 		return ret;
 	}
 
@@ -1098,7 +1102,8 @@ static int set_priv_filter(struct usbnet *usbdev)
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 
-	devdbg(usbdev, "set_priv_filter: wpa_version=0x%x", priv->wpa_version);
+	netdev_dbg(usbdev->net, "%s(): wpa_version=0x%x\n",
+		   __func__, priv->wpa_version);
 
 	if (priv->wpa_version & NL80211_WPA_VERSION_2 ||
 	    priv->wpa_version & NL80211_WPA_VERSION_1)
@@ -1116,8 +1121,8 @@ static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 	__le32 tmp;
 	int encr_mode, ret;
 
-	devdbg(usbdev, "set_encr_mode: cipher_pair=0x%x cipher_group=0x%x",
-		pairwise, groupwise);
+	netdev_dbg(usbdev->net, "%s(): cipher_pair=0x%x cipher_group=0x%x\n",
+		   __func__, pairwise, groupwise);
 
 	if (pairwise & RNDIS_WLAN_ALG_CCMP)
 		encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
@@ -1136,7 +1141,8 @@ static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 	ret = rndis_set_oid(usbdev, OID_802_11_ENCRYPTION_STATUS, &tmp,
 								sizeof(tmp));
 	if (ret != 0) {
-		devwarn(usbdev, "setting encr mode failed (%08X)", ret);
+		netdev_warn(usbdev->net, "setting encr mode failed (%08X)\n",
+			    ret);
 		return ret;
 	}
 
@@ -1151,13 +1157,15 @@ static int set_infra_mode(struct usbnet *usbdev, int mode)
 	__le32 tmp;
 	int ret;
 
-	devdbg(usbdev, "set_infra_mode: infra_mode=0x%x", priv->infra_mode);
+	netdev_dbg(usbdev->net, "%s(): infra_mode=0x%x\n",
+		   __func__, priv->infra_mode);
 
 	tmp = cpu_to_le32(mode);
 	ret = rndis_set_oid(usbdev, OID_802_11_INFRASTRUCTURE_MODE, &tmp,
 								sizeof(tmp));
 	if (ret != 0) {
-		devwarn(usbdev, "setting infra mode failed (%08X)", ret);
+		netdev_warn(usbdev->net, "setting infra mode failed (%08X)\n",
+			    ret);
 		return ret;
 	}
 
@@ -1174,7 +1182,7 @@ static int set_rts_threshold(struct usbnet *usbdev, u32 rts_threshold)
 {
 	__le32 tmp;
 
-	devdbg(usbdev, "set_rts_threshold %i", rts_threshold);
+	netdev_dbg(usbdev->net, "%s(): %i\n", __func__, rts_threshold);
 
 	if (rts_threshold < 0 || rts_threshold > 2347)
 		rts_threshold = 2347;
@@ -1188,7 +1196,7 @@ static int set_frag_threshold(struct usbnet *usbdev, u32 frag_threshold)
 {
 	__le32 tmp;
 
-	devdbg(usbdev, "set_frag_threshold %i", frag_threshold);
+	netdev_dbg(usbdev->net, "%s(): %i\n", __func__, frag_threshold);
 
 	if (frag_threshold < 256 || frag_threshold > 2346)
 		frag_threshold = 2346;
@@ -1222,7 +1230,7 @@ static int set_channel(struct usbnet *usbdev, int channel)
 	unsigned int dsconfig;
 	int len, ret;
 
-	devdbg(usbdev, "set_channel(%d)", channel);
+	netdev_dbg(usbdev->net, "%s(%d)\n", __func__, channel);
 
 	/* this OID is valid only when not associated */
 	if (is_associated(usbdev))
@@ -1233,7 +1241,8 @@ static int set_channel(struct usbnet *usbdev, int channel)
 	len = sizeof(config);
 	ret = rndis_query_oid(usbdev, OID_802_11_CONFIGURATION, &config, &len);
 	if (ret < 0) {
-		devdbg(usbdev, "set_channel: querying configuration failed");
+		netdev_dbg(usbdev->net, "%s(): querying configuration failed\n",
+			   __func__);
 		return ret;
 	}
 
@@ -1241,7 +1250,7 @@ static int set_channel(struct usbnet *usbdev, int channel)
 	ret = rndis_set_oid(usbdev, OID_802_11_CONFIGURATION, &config,
 								sizeof(config));
 
-	devdbg(usbdev, "set_channel: %d -> %d", channel, ret);
+	netdev_dbg(usbdev->net, "%s(): %d -> %d\n", __func__, channel, ret);
 
 	return ret;
 }
@@ -1255,7 +1264,8 @@ static int add_wep_key(struct usbnet *usbdev, const u8 *key, int key_len,
 	u32 cipher;
 	int ret;
 
-	devdbg(usbdev, "add_wep_key(idx: %d, len: %d)", index, key_len);
+	netdev_dbg(usbdev->net, "%s(idx: %d, len: %d)\n",
+		   __func__, index, key_len);
 
 	if ((key_len != 5 && key_len != 13) || index < 0 || index > 3)
 		return -EINVAL;
@@ -1277,15 +1287,15 @@ static int add_wep_key(struct usbnet *usbdev, const u8 *key, int key_len,
 		ret = set_encr_mode(usbdev, RNDIS_WLAN_ALG_WEP,
 							RNDIS_WLAN_ALG_NONE);
 		if (ret)
-			devwarn(usbdev, "encryption couldn't be enabled (%08X)",
-									ret);
+			netdev_warn(usbdev->net, "encryption couldn't be enabled (%08X)\n",
+				    ret);
 	}
 
 	ret = rndis_set_oid(usbdev, OID_802_11_ADD_WEP, &ndis_key,
 							sizeof(ndis_key));
 	if (ret != 0) {
-		devwarn(usbdev, "adding encryption key %d failed (%08X)",
-							index+1, ret);
+		netdev_warn(usbdev->net, "adding encryption key %d failed (%08X)\n",
+			    index + 1, ret);
 		return ret;
 	}
 
@@ -1307,22 +1317,23 @@ static int add_wpa_key(struct usbnet *usbdev, const u8 *key, int key_len,
 	int ret;
 
 	if (index < 0 || index >= 4) {
-		devdbg(usbdev, "add_wpa_key: index out of range (%i)", index);
+		netdev_dbg(usbdev->net, "%s(): index out of range (%i)\n",
+			   __func__, index);
 		return -EINVAL;
 	}
 	if (key_len > sizeof(ndis_key.material) || key_len < 0) {
-		devdbg(usbdev, "add_wpa_key: key length out of range (%i)",
-			key_len);
+		netdev_dbg(usbdev->net, "%s(): key length out of range (%i)\n",
+			   __func__, key_len);
 		return -EINVAL;
 	}
 	if (flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ) {
 		if (!rx_seq || seq_len <= 0) {
-			devdbg(usbdev, "add_wpa_key: recv seq flag without"
-					"buffer");
+			netdev_dbg(usbdev->net, "%s(): recv seq flag without buffer\n",
+				   __func__);
 			return -EINVAL;
 		}
 		if (rx_seq && seq_len > sizeof(ndis_key.rsc)) {
-			devdbg(usbdev, "add_wpa_key: too big recv seq buffer");
+			netdev_dbg(usbdev->net, "%s(): too big recv seq buffer\n", __func__);
 			return -EINVAL;
 		}
 	}
@@ -1330,15 +1341,16 @@ static int add_wpa_key(struct usbnet *usbdev, const u8 *key, int key_len,
 	is_addr_ok = addr && !is_zero_ether_addr(addr) &&
 					!is_broadcast_ether_addr(addr);
 	if ((flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) && !is_addr_ok) {
-		devdbg(usbdev, "add_wpa_key: pairwise but bssid invalid (%pM)",
-			addr);
+		netdev_dbg(usbdev->net, "%s(): pairwise but bssid invalid (%pM)\n",
+			   __func__, addr);
 		return -EINVAL;
 	}
 
-	devdbg(usbdev, "add_wpa_key(%i): flags:%i%i%i", index,
-			!!(flags & NDIS_80211_ADDKEY_TRANSMIT_KEY),
-			!!(flags & NDIS_80211_ADDKEY_PAIRWISE_KEY),
-			!!(flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ));
+	netdev_dbg(usbdev->net, "%s(%i): flags:%i%i%i\n",
+		   __func__, index,
+		   !!(flags & NDIS_80211_ADDKEY_TRANSMIT_KEY),
+		   !!(flags & NDIS_80211_ADDKEY_PAIRWISE_KEY),
+		   !!(flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ));
 
 	memset(&ndis_key, 0, sizeof(ndis_key));
 
@@ -1372,7 +1384,8 @@ static int add_wpa_key(struct usbnet *usbdev, const u8 *key, int key_len,
 
 	ret = rndis_set_oid(usbdev, OID_802_11_ADD_KEY, &ndis_key,
 					le32_to_cpu(ndis_key.size));
-	devdbg(usbdev, "add_wpa_key: OID_802_11_ADD_KEY -> %08X", ret);
+	netdev_dbg(usbdev->net, "%s(): OID_802_11_ADD_KEY -> %08X\n",
+		   __func__, ret);
 	if (ret != 0)
 		return ret;
 
@@ -1401,7 +1414,7 @@ static int restore_key(struct usbnet *usbdev, int key_idx)
 
 	key = priv->encr_keys[key_idx];
 
-	devdbg(usbdev, "restore_key: %i:%i", key_idx, key.len);
+	netdev_dbg(usbdev->net, "%s(): %i:%i\n", __func__, key_idx, key.len);
 
 	if (key.len == 0)
 		return 0;
@@ -1436,8 +1449,9 @@ static int remove_key(struct usbnet *usbdev, int index, const u8 *bssid)
 
 	is_wpa = is_wpa_key(priv, index);
 
-	devdbg(usbdev, "remove_key: %i:%s:%i", index, is_wpa ? "wpa" : "wep",
-		priv->encr_keys[index].len);
+	netdev_dbg(usbdev->net, "%s(): %i:%s:%i\n",
+		   __func__, index, is_wpa ? "wpa" : "wep",
+		   priv->encr_keys[index].len);
 
 	clear_key(priv, index);
 
@@ -1464,9 +1478,9 @@ static int remove_key(struct usbnet *usbdev, int index, const u8 *bssid)
 		ret = rndis_set_oid(usbdev, OID_802_11_REMOVE_WEP, &keyindex,
 							sizeof(keyindex));
 		if (ret != 0) {
-			devwarn(usbdev,
-				"removing encryption key %d failed (%08X)",
-				index, ret);
+			netdev_warn(usbdev->net,
+				    "removing encryption key %d failed (%08X)\n",
+				    index, ret);
 			return ret;
 		}
 	}
@@ -1498,9 +1512,9 @@ static void set_multicast_list(struct usbnet *usbdev)
 		size = min(priv->multicast_size, netdev_mc_count(usbdev->net));
 		buf = kmalloc(size * ETH_ALEN, GFP_KERNEL);
 		if (!buf) {
-			devwarn(usbdev,
-				"couldn't alloc %d bytes of memory",
-				size * ETH_ALEN);
+			netdev_warn(usbdev->net,
+				    "couldn't alloc %d bytes of memory\n",
+				    size * ETH_ALEN);
 			return;
 		}
 
@@ -1520,8 +1534,8 @@ static void set_multicast_list(struct usbnet *usbdev)
 		else
 			filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
 
-		devdbg(usbdev, "OID_802_3_MULTICAST_LIST(%d, max: %d) -> %d",
-						i, priv->multicast_size, ret);
+		netdev_dbg(usbdev->net, "OID_802_3_MULTICAST_LIST(%d, max: %d) -> %d\n",
+			   i, priv->multicast_size, ret);
 
 		kfree(buf);
 	}
@@ -1529,12 +1543,12 @@ static void set_multicast_list(struct usbnet *usbdev)
 	ret = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
 							sizeof(filter));
 	if (ret < 0) {
-		devwarn(usbdev, "couldn't set packet filter: %08x",
-							le32_to_cpu(filter));
+		netdev_warn(usbdev->net, "couldn't set packet filter: %08x\n",
+			    le32_to_cpu(filter));
 	}
 
-	devdbg(usbdev, "OID_GEN_CURRENT_PACKET_FILTER(%08x) -> %d",
-						le32_to_cpu(filter), ret);
+	netdev_dbg(usbdev->net, "OID_GEN_CURRENT_PACKET_FILTER(%08x) -> %d\n",
+		   le32_to_cpu(filter), ret);
 }
 
 /*
@@ -1592,7 +1606,8 @@ static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
 	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
 	struct usbnet *usbdev = priv->usbdev;
 
-	devdbg(usbdev, "rndis_set_tx_power type:0x%x dbm:%i", type, dbm);
+	netdev_dbg(usbdev->net, "%s(): type:0x%x dbm:%i\n",
+		   __func__, type, dbm);
 
 	/* Device doesn't support changing txpower after initialization, only
 	 * turn off/on radio. Support 'auto' mode and setting same dBm that is
@@ -1615,7 +1630,7 @@ static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm)
 
 	*dbm = get_bcm4320_power_dbm(priv);
 
-	devdbg(usbdev, "rndis_get_tx_power dbm:%i", *dbm);
+	netdev_dbg(usbdev->net, "%s(): dbm:%i\n", __func__, *dbm);
 
 	return 0;
 }
@@ -1629,7 +1644,7 @@ static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
 	int ret;
 	__le32 tmp;
 
-	devdbg(usbdev, "cfg80211.scan");
+	netdev_dbg(usbdev->net, "cfg80211.scan\n");
 
 	/* Get current bssid list from device before new scan, as new scan
 	 * clears internal bssid list.
@@ -1669,8 +1684,8 @@ static struct cfg80211_bss *rndis_bss_info_update(struct usbnet *usbdev,
 	int ie_len, bssid_len;
 	u8 *ie;
 
-	devdbg(usbdev, " found bssid: '%.32s' [%pM]", bssid->ssid.essid,
-							bssid->mac);
+	netdev_dbg(usbdev->net, " found bssid: '%.32s' [%pM]\n",
+		   bssid->ssid.essid, bssid->mac);
 
 	/* parse bssid structure */
 	bssid_len = le32_to_cpu(bssid->length);
@@ -1712,7 +1727,7 @@ static int rndis_check_bssid_list(struct usbnet *usbdev)
 	int ret = -EINVAL, len, count, bssid_len;
 	bool resized = false;
 
-	devdbg(usbdev, "check_bssid_list");
+	netdev_dbg(usbdev->net, "check_bssid_list\n");
 
 	len = CONTROL_BUFFER_SIZE;
 resize_buf:
@@ -1736,8 +1751,8 @@ resize_buf:
 	bssid = bssid_list->bssid;
 	bssid_len = le32_to_cpu(bssid->length);
 	count = le32_to_cpu(bssid_list->num_items);
-	devdbg(usbdev, "check_bssid_list: %d BSSIDs found (buflen: %d)", count,
-									len);
+	netdev_dbg(usbdev->net, "check_bssid_list: %d BSSIDs found (buflen: %d)\n",
+		   count, len);
 
 	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
 		rndis_bss_info_update(usbdev, bssid);
@@ -1759,7 +1774,7 @@ static void rndis_get_scan_results(struct work_struct *work)
 	struct usbnet *usbdev = priv->usbdev;
 	int ret;
 
-	devdbg(usbdev, "get_scan_results");
+	netdev_dbg(usbdev->net, "get_scan_results\n");
 
 	if (!priv->scan_request)
 		return;
@@ -1793,7 +1808,7 @@ static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	if (sme->crypto.n_ciphers_pairwise > 0 &&
 			pairwise == RNDIS_WLAN_ALG_NONE) {
-		deverr(usbdev, "Unsupported pairwise cipher");
+		netdev_err(usbdev->net, "Unsupported pairwise cipher\n");
 		return -ENOTSUPP;
 	}
 
@@ -1803,28 +1818,30 @@ static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	if (sme->crypto.n_akm_suites > 0 &&
 			keymgmt == RNDIS_WLAN_KEY_MGMT_NONE) {
-		deverr(usbdev, "Invalid keymgmt");
+		netdev_err(usbdev->net, "Invalid keymgmt\n");
 		return -ENOTSUPP;
 	}
 
-	devdbg(usbdev, "cfg80211.connect('%.32s':[%pM]:%d:[%d,0x%x:0x%x]:[0x%x:"
-			"0x%x]:0x%x)", sme->ssid, sme->bssid, chan,
-			sme->privacy, sme->crypto.wpa_versions, sme->auth_type,
-			groupwise, pairwise, keymgmt);
+	netdev_dbg(usbdev->net, "cfg80211.connect('%.32s':[%pM]:%d:[%d,0x%x:0x%x]:[0x%x:0x%x]:0x%x)\n",
+		   sme->ssid, sme->bssid, chan,
+		   sme->privacy, sme->crypto.wpa_versions, sme->auth_type,
+		   groupwise, pairwise, keymgmt);
 
 	if (is_associated(usbdev))
 		disassociate(usbdev, false);
 
 	ret = set_infra_mode(usbdev, NDIS_80211_INFRA_INFRA);
 	if (ret < 0) {
-		devdbg(usbdev, "connect: set_infra_mode failed, %d", ret);
+		netdev_dbg(usbdev->net, "connect: set_infra_mode failed, %d\n",
+			   ret);
 		goto err_turn_radio_on;
 	}
 
 	ret = set_auth_mode(usbdev, sme->crypto.wpa_versions, sme->auth_type,
 								keymgmt);
 	if (ret < 0) {
-		devdbg(usbdev, "connect: set_auth_mode failed, %d", ret);
+		netdev_dbg(usbdev->net, "connect: set_auth_mode failed, %d\n",
+			   ret);
 		goto err_turn_radio_on;
 	}
 
@@ -1832,14 +1849,16 @@ static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	ret = set_encr_mode(usbdev, pairwise, groupwise);
 	if (ret < 0) {
-		devdbg(usbdev, "connect: set_encr_mode failed, %d", ret);
+		netdev_dbg(usbdev->net, "connect: set_encr_mode failed, %d\n",
+			   ret);
 		goto err_turn_radio_on;
 	}
 
 	if (channel) {
 		ret = set_channel(usbdev, chan);
 		if (ret < 0) {
-			devdbg(usbdev, "connect: set_channel failed, %d", ret);
+			netdev_dbg(usbdev->net, "connect: set_channel failed, %d\n",
+				   ret);
 			goto err_turn_radio_on;
 		}
 	}
@@ -1848,8 +1867,8 @@ static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
 		priv->encr_tx_key_index = sme->key_idx;
 		ret = add_wep_key(usbdev, sme->key, sme->key_len, sme->key_idx);
 		if (ret < 0) {
-			devdbg(usbdev, "connect: add_wep_key failed, %d "
-				"(%d, %d)", ret, sme->key_len, sme->key_idx);
+			netdev_dbg(usbdev->net, "connect: add_wep_key failed, %d (%d, %d)\n",
+				   ret, sme->key_len, sme->key_idx);
 			goto err_turn_radio_on;
 		}
 	}
@@ -1858,7 +1877,8 @@ static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
 				!is_broadcast_ether_addr(sme->bssid)) {
 		ret = set_bssid(usbdev, sme->bssid);
 		if (ret < 0) {
-			devdbg(usbdev, "connect: set_bssid failed, %d", ret);
+			netdev_dbg(usbdev->net, "connect: set_bssid failed, %d\n",
+				   ret);
 			goto err_turn_radio_on;
 		}
 	} else
@@ -1880,7 +1900,7 @@ static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	ret = set_essid(usbdev, &ssid);
 	if (ret < 0)
-		devdbg(usbdev, "connect: set_essid failed, %d", ret);
+		netdev_dbg(usbdev->net, "connect: set_essid failed, %d\n", ret);
 	return ret;
 
 err_turn_radio_on:
@@ -1895,7 +1915,7 @@ static int rndis_disconnect(struct wiphy *wiphy, struct net_device *dev,
 	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
 	struct usbnet *usbdev = priv->usbdev;
 
-	devdbg(usbdev, "cfg80211.disconnect(%d)", reason_code);
+	netdev_dbg(usbdev->net, "cfg80211.disconnect(%d)\n", reason_code);
 
 	priv->connected = false;
 	memset(priv->bssid, 0, ETH_ALEN);
@@ -1929,21 +1949,23 @@ static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 		alg = RNDIS_WLAN_ALG_NONE;
 	}
 
-	devdbg(usbdev, "cfg80211.join_ibss('%.32s':[%pM]:%d:%d)", params->ssid,
-					params->bssid, chan, params->privacy);
+	netdev_dbg(usbdev->net, "cfg80211.join_ibss('%.32s':[%pM]:%d:%d)\n",
+		   params->ssid, params->bssid, chan, params->privacy);
 
 	if (is_associated(usbdev))
 		disassociate(usbdev, false);
 
 	ret = set_infra_mode(usbdev, NDIS_80211_INFRA_ADHOC);
 	if (ret < 0) {
-		devdbg(usbdev, "join_ibss: set_infra_mode failed, %d", ret);
+		netdev_dbg(usbdev->net, "join_ibss: set_infra_mode failed, %d\n",
+			   ret);
 		goto err_turn_radio_on;
 	}
 
 	ret = set_auth_mode(usbdev, 0, auth_type, RNDIS_WLAN_KEY_MGMT_NONE);
 	if (ret < 0) {
-		devdbg(usbdev, "join_ibss: set_auth_mode failed, %d", ret);
+		netdev_dbg(usbdev->net, "join_ibss: set_auth_mode failed, %d\n",
+			   ret);
 		goto err_turn_radio_on;
 	}
 
@@ -1951,15 +1973,16 @@ static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 
 	ret = set_encr_mode(usbdev, alg, RNDIS_WLAN_ALG_NONE);
 	if (ret < 0) {
-		devdbg(usbdev, "join_ibss: set_encr_mode failed, %d", ret);
+		netdev_dbg(usbdev->net, "join_ibss: set_encr_mode failed, %d\n",
+			   ret);
 		goto err_turn_radio_on;
 	}
 
 	if (channel) {
 		ret = set_channel(usbdev, chan);
 		if (ret < 0) {
-			devdbg(usbdev, "join_ibss: set_channel failed, %d",
-				ret);
+			netdev_dbg(usbdev->net, "join_ibss: set_channel failed, %d\n",
+				   ret);
 			goto err_turn_radio_on;
 		}
 	}
@@ -1968,7 +1991,8 @@ static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 				!is_broadcast_ether_addr(params->bssid)) {
 		ret = set_bssid(usbdev, params->bssid);
 		if (ret < 0) {
-			devdbg(usbdev, "join_ibss: set_bssid failed, %d", ret);
+			netdev_dbg(usbdev->net, "join_ibss: set_bssid failed, %d\n",
+				   ret);
 			goto err_turn_radio_on;
 		}
 	} else
@@ -1988,7 +2012,8 @@ static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 
 	ret = set_essid(usbdev, &ssid);
 	if (ret < 0)
-		devdbg(usbdev, "join_ibss: set_essid failed, %d", ret);
+		netdev_dbg(usbdev->net, "join_ibss: set_essid failed, %d\n",
+			   ret);
 	return ret;
 
 err_turn_radio_on:
@@ -2002,7 +2027,7 @@ static int rndis_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
 	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
 	struct usbnet *usbdev = priv->usbdev;
 
-	devdbg(usbdev, "cfg80211.leave_ibss()");
+	netdev_dbg(usbdev->net, "cfg80211.leave_ibss()\n");
 
 	priv->connected = false;
 	memset(priv->bssid, 0, ETH_ALEN);
@@ -2028,8 +2053,8 @@ static int rndis_add_key(struct wiphy *wiphy, struct net_device *netdev,
 	struct usbnet *usbdev = priv->usbdev;
 	__le32 flags;
 
-	devdbg(usbdev, "rndis_add_key(%i, %pM, %08x)", key_index, mac_addr,
-							params->cipher);
+	netdev_dbg(usbdev->net, "%s(%i, %pM, %08x)\n",
+		   __func__, key_index, mac_addr, params->cipher);
 
 	switch (params->cipher) {
 	case WLAN_CIPHER_SUITE_WEP40:
@@ -2050,8 +2075,8 @@ static int rndis_add_key(struct wiphy *wiphy, struct net_device *netdev,
 				key_index, mac_addr, params->seq,
 				params->seq_len, params->cipher, flags);
 	default:
-		devdbg(usbdev, "rndis_add_key: unsupported cipher %08x",
-							params->cipher);
+		netdev_dbg(usbdev->net, "%s(): unsupported cipher %08x\n",
+			   __func__, params->cipher);
 		return -ENOTSUPP;
 	}
 }
@@ -2062,7 +2087,7 @@ static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev,
 	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
 	struct usbnet *usbdev = priv->usbdev;
 
-	devdbg(usbdev, "rndis_del_key(%i, %pM)", key_index, mac_addr);
+	netdev_dbg(usbdev->net, "%s(%i, %pM)\n", __func__, key_index, mac_addr);
 
 	return remove_key(usbdev, key_index, mac_addr);
 }
@@ -2074,7 +2099,7 @@ static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
 	struct usbnet *usbdev = priv->usbdev;
 	struct rndis_wlan_encr_key key;
 
-	devdbg(usbdev, "rndis_set_default_key(%i)", key_index);
+	netdev_dbg(usbdev->net, "%s(%i)\n", __func__, key_index);
 
 	priv->encr_tx_key_index = key_index;
 
@@ -2188,7 +2213,8 @@ static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
 	if (ret < 0)
 		memset(bssid, 0, sizeof(bssid));
 
-	devdbg(usbdev, "link up work: [%pM] %s", bssid, roamed ? "roamed" : "");
+	netdev_dbg(usbdev->net, "link up work: [%pM]%s\n",
+		   bssid, roamed ? " roamed" : "");
 
 	/* Internal bss list in device always contains at least the currently
 	 * connected bss and we can get it to cfg80211 with
@@ -2270,8 +2296,8 @@ static void rndis_wlan_auth_indication(struct usbnet *usbdev,
 	/* must have at least one array entry */
 	if (len < offsetof(struct ndis_80211_status_indication, u) +
 				sizeof(struct ndis_80211_auth_request)) {
-		devinfo(usbdev, "authentication indication: "
-				"too short message (%i)", len);
+		netdev_info(usbdev->net, "authentication indication: too short message (%i)\n",
+			    len);
 		return;
 	}
 
@@ -2298,8 +2324,8 @@ static void rndis_wlan_auth_indication(struct usbnet *usbdev,
 			type = "group_error";
 		}
 
-		devinfo(usbdev, "authentication indication: %s (0x%08x)", type,
-				le32_to_cpu(auth_req->flags));
+		netdev_info(usbdev->net, "authentication indication: %s (0x%08x)\n",
+			    type, le32_to_cpu(auth_req->flags));
 
 		if (pairwise_error) {
 			key_type = NL80211_KEYTYPE_PAIRWISE;
@@ -2335,8 +2361,8 @@ static void rndis_wlan_pmkid_cand_list_indication(struct usbnet *usbdev,
 
 	if (len < offsetof(struct ndis_80211_status_indication, u) +
 				sizeof(struct ndis_80211_pmkid_cand_list)) {
-		devinfo(usbdev, "pmkid candidate list indication: "
-				"too short message (%i)", len);
+		netdev_info(usbdev->net, "pmkid candidate list indication: too short message (%i)\n",
+			    len);
 		return;
 	}
 
@@ -2346,18 +2372,16 @@ static void rndis_wlan_pmkid_cand_list_indication(struct usbnet *usbdev,
 			offsetof(struct ndis_80211_status_indication, u);
 
 	if (len < expected_len) {
-		devinfo(usbdev, "pmkid candidate list indication: "
-				"list larger than buffer (%i < %i)",
-				len, expected_len);
+		netdev_info(usbdev->net, "pmkid candidate list indication: list larger than buffer (%i < %i)\n",
+			    len, expected_len);
 		return;
 	}
 
 	cand_list = &indication->u.cand_list;
 
-	devinfo(usbdev, "pmkid candidate list indication: "
-			"version %i, candidates %i",
-			le32_to_cpu(cand_list->version),
-			le32_to_cpu(cand_list->num_candidates));
+	netdev_info(usbdev->net, "pmkid candidate list indication: version %i, candidates %i\n",
+		    le32_to_cpu(cand_list->version),
+		    le32_to_cpu(cand_list->num_candidates));
 
 	if (le32_to_cpu(cand_list->version) != 1)
 		return;
@@ -2366,8 +2390,8 @@ static void rndis_wlan_pmkid_cand_list_indication(struct usbnet *usbdev,
 		struct ndis_80211_pmkid_candidate *cand =
 						&cand_list->candidate_list[i];
 
-		devdbg(usbdev, "cand[%i]: flags: 0x%08x, bssid: %pM",
-				i, le32_to_cpu(cand->flags), cand->bssid);
+		netdev_dbg(usbdev->net, "cand[%i]: flags: 0x%08x, bssid: %pM\n",
+			   i, le32_to_cpu(cand->flags), cand->bssid);
 
 #if 0
 		struct iw_pmkid_cand pcand;
@@ -2398,15 +2422,14 @@ static void rndis_wlan_media_specific_indication(struct usbnet *usbdev,
 	len = le32_to_cpu(msg->length);
 
 	if (len < 8) {
-		devinfo(usbdev, "media specific indication, "
-				"ignore too short message (%i < 8)", len);
+		netdev_info(usbdev->net, "media specific indication, ignore too short message (%i < 8)\n",
+			    len);
 		return;
 	}
 
 	if (offset + len > buflen) {
-		devinfo(usbdev, "media specific indication, "
-				"too large to fit to buffer (%i > %i)",
-				offset + len, buflen);
+		netdev_info(usbdev->net, "media specific indication, too large to fit to buffer (%i > %i)\n",
+			    offset + len, buflen);
 		return;
 	}
 
@@ -2414,13 +2437,13 @@ static void rndis_wlan_media_specific_indication(struct usbnet *usbdev,
 
 	switch (le32_to_cpu(indication->status_type)) {
 	case NDIS_80211_STATUSTYPE_RADIOSTATE:
-		devinfo(usbdev, "radio state indication: %i",
-			le32_to_cpu(indication->u.radio_status));
+		netdev_info(usbdev->net, "radio state indication: %i\n",
+			    le32_to_cpu(indication->u.radio_status));
 		return;
 
 	case NDIS_80211_STATUSTYPE_MEDIASTREAMMODE:
-		devinfo(usbdev, "media stream mode indication: %i",
-			le32_to_cpu(indication->u.media_stream_mode));
+		netdev_info(usbdev->net, "media stream mode indication: %i\n",
+			    le32_to_cpu(indication->u.media_stream_mode));
 		return;
 
 	case NDIS_80211_STATUSTYPE_AUTHENTICATION:
@@ -2432,9 +2455,8 @@ static void rndis_wlan_media_specific_indication(struct usbnet *usbdev,
 		return;
 
 	default:
-		devinfo(usbdev, "media specific indication: "
-				"unknown status type 0x%08x",
-				le32_to_cpu(indication->status_type));
+		netdev_info(usbdev->net, "media specific indication: unknown status type 0x%08x\n",
+			    le32_to_cpu(indication->status_type));
 	}
 }
 
@@ -2451,14 +2473,13 @@ static void rndis_wlan_indication(struct usbnet *usbdev, void *ind, int buflen)
 			 * and userspace to think that device is
 			 * roaming/reassociating when it isn't.
 			 */
-			devdbg(usbdev, "ignored OID_802_11_ADD_KEY triggered "
-					"'media connect'");
+			netdev_dbg(usbdev->net, "ignored OID_802_11_ADD_KEY triggered 'media connect'\n");
 			return;
 		}
 
 		usbnet_pause_rx(usbdev);
 
-		devinfo(usbdev, "media connect");
+		netdev_info(usbdev->net, "media connect\n");
 
 		/* queue work to avoid recursive calls into rndis_command */
 		set_bit(WORK_LINK_UP, &priv->work_pending);
@@ -2466,7 +2487,7 @@ static void rndis_wlan_indication(struct usbnet *usbdev, void *ind, int buflen)
 		break;
 
 	case RNDIS_STATUS_MEDIA_DISCONNECT:
-		devinfo(usbdev, "media disconnect");
+		netdev_info(usbdev->net, "media disconnect\n");
 
 		/* queue work to avoid recursive calls into rndis_command */
 		set_bit(WORK_LINK_DOWN, &priv->work_pending);
@@ -2478,8 +2499,8 @@ static void rndis_wlan_indication(struct usbnet *usbdev, void *ind, int buflen)
 		break;
 
 	default:
-		devinfo(usbdev, "indication: 0x%08x",
-				le32_to_cpu(msg->status));
+		netdev_info(usbdev->net, "indication: 0x%08x\n",
+			    le32_to_cpu(msg->status));
 		break;
 	}
 }
@@ -2544,8 +2565,8 @@ static void rndis_device_poller(struct work_struct *work)
 	if (ret == 0)
 		priv->last_qual = level_to_qual(le32_to_cpu(rssi));
 
-	devdbg(usbdev, "dev-poller: OID_802_11_RSSI -> %d, rssi:%d, qual: %d",
-		ret, le32_to_cpu(rssi), level_to_qual(le32_to_cpu(rssi)));
+	netdev_dbg(usbdev->net, "dev-poller: OID_802_11_RSSI -> %d, rssi:%d, qual: %d\n",
+		   ret, le32_to_cpu(rssi), level_to_qual(le32_to_cpu(rssi)));
 
 	/* Workaround transfer stalls on poor quality links.
 	 * TODO: find right way to fix these stalls (as stalls do not happen
@@ -2838,11 +2859,11 @@ static int rndis_wlan_reset(struct usbnet *usbdev)
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int retval;
 
-	devdbg(usbdev, "rndis_wlan_reset");
+	netdev_dbg(usbdev->net, "%s()\n", __func__);
 
 	retval = rndis_reset(usbdev);
 	if (retval)
-		devwarn(usbdev, "rndis_reset() failed: %d", retval);
+		netdev_warn(usbdev->net, "rndis_reset failed: %d\n", retval);
 
 	/* rndis_reset cleared multicast list, so restore here.
 	   (set_multicast_list() also turns on current packet filter) */
@@ -2860,7 +2881,7 @@ static int rndis_wlan_stop(struct usbnet *usbdev)
 	int retval;
 	__le32 filter;
 
-	devdbg(usbdev, "rndis_wlan_stop");
+	netdev_dbg(usbdev->net, "%s()\n", __func__);
 
 	retval = disassociate(usbdev, false);
 
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 8ce61359bf73..df1e83dd9a54 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -214,25 +214,4 @@ extern void usbnet_set_msglevel (struct net_device *, u32);
 extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
 extern int usbnet_nway_reset(struct net_device *net);
 
-/* messaging support includes the interface name, so it must not be
- * used before it has one ... notably, in minidriver bind() calls.
- */
-#ifdef DEBUG
-#define devdbg(usbnet, fmt, arg...) \
-	printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-#else
-#define devdbg(usbnet, fmt, arg...) \
-	({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \
-		## arg); 0; })
-#endif
-
-#define deverr(usbnet, fmt, arg...) \
-	printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-#define devwarn(usbnet, fmt, arg...) \
-	printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-
-#define devinfo(usbnet, fmt, arg...) \
-	printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
-
-
 #endif /* __LINUX_USB_USBNET_H */
-- 
cgit v1.2.3


From a475f603d23392f386e45cf377b17c30ed3bbb80 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 10:30:24 +0000
Subject: drivers/net/usb: Use netif_<level> logging facilities

Convert from:
	if (netif_msg_<foo>(priv))
		dev_<level>(dev...
to
	netif_<level>(priv, foo, dev...

Also convert a few:

	if (i < REG_TIMEOUT) {
		etc...
		return ret;
       }
to
	if (i >= REG_TIMEOUT)
		goto fail;
	etc...
	return ret;

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ether.c  |  18 ++--
 drivers/net/usb/net1080.c    |  96 ++++++++++----------
 drivers/net/usb/pegasus.c    | 170 +++++++++++++++--------------------
 drivers/net/usb/rndis_host.c |  14 ++-
 drivers/net/usb/smsc95xx.c   |  99 +++++++++-----------
 drivers/net/usb/usbnet.c     | 208 +++++++++++++++++++------------------------
 6 files changed, 264 insertions(+), 341 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 7e5a75269cc5..3486e8ca039a 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -339,10 +339,10 @@ EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
 
 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
 {
-	if (netif_msg_timer(dev))
-		netdev_info(dev->net, "link speeds: %u kbps up, %u kbps down\n",
-			    __le32_to_cpu(speeds[0]) / 1000,
-			    __le32_to_cpu(speeds[1]) / 1000);
+	netif_info(dev, timer, dev->net,
+		   "link speeds: %u kbps up, %u kbps down\n",
+		   __le32_to_cpu(speeds[0]) / 1000,
+		   __le32_to_cpu(speeds[1]) / 1000);
 }
 
 static void cdc_status(struct usbnet *dev, struct urb *urb)
@@ -361,18 +361,16 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 	event = urb->transfer_buffer;
 	switch (event->bNotificationType) {
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
-		if (netif_msg_timer(dev))
-			netdev_dbg(dev->net, "CDC: carrier %s\n",
-				   event->wValue ? "on" : "off");
+		netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
+			  event->wValue ? "on" : "off");
 		if (event->wValue)
 			netif_carrier_on(dev->net);
 		else
 			netif_carrier_off(dev->net);
 		break;
 	case USB_CDC_NOTIFY_SPEED_CHANGE:	/* tx/rx rates */
-		if (netif_msg_timer(dev))
-			netdev_dbg(dev->net, "CDC: speed change (len %d)\n",
-				   urb->actual_length);
+		netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
+			  urb->actual_length);
 		if (urb->actual_length != (sizeof *event + 8))
 			set_bit(EVENT_STS_SPLIT, &dev->flags);
 		else
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index f6994053c101..bdcad45954a3 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -203,26 +203,23 @@ static void nc_dump_registers(struct usbnet *dev)
 
 static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
 {
-	if (!netif_msg_link(dev))
-		return;
-	netdev_dbg(dev->net, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
-		   " this%s%s;"
-		   " other%s%s; r/o 0x%x\n",
-		   dev->udev->bus->bus_name, dev->udev->devpath,
-		   usbctl,
-		   (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
-		   (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
-		   (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
-		   (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
-		   (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
-
-		   (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
-		   (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
-
-		   (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
-		   (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
-
-		   usbctl & ~USBCTL_WRITABLE_MASK);
+	netif_dbg(dev, link, dev->net,
+		  "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  usbctl,
+		  (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
+		  (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
+		  (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
+		  (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
+		  (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
+
+		  (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
+		  (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
+
+		  (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
+		  (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
+
+		  usbctl & ~USBCTL_WRITABLE_MASK);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -249,27 +246,26 @@ static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
 
 static inline void nc_dump_status(struct usbnet *dev, u16 status)
 {
-	if (!netif_msg_link(dev))
-		return;
-	netdev_dbg(dev->net, "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
-		   dev->udev->bus->bus_name, dev->udev->devpath,
-		   status,
-
-		   // XXX the packet counts don't seem right
-		   // (1 at reset, not 0); maybe UNSPEC too
-
-		   (status & STATUS_PORT_A) ? 'A' : 'B',
-		   STATUS_PACKETS_THIS(status),
-		   (status & STATUS_CONN_THIS) ? " CON" : "",
-		   (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
-		   (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
-
-		   STATUS_PACKETS_OTHER(status),
-		   (status & STATUS_CONN_OTHER) ? " CON" : "",
-		   (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
-		   (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
-
-		   status & STATUS_UNSPEC_MASK);
+	netif_dbg(dev, link, dev->net,
+		  "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  status,
+
+		  // XXX the packet counts don't seem right
+		  // (1 at reset, not 0); maybe UNSPEC too
+
+		  (status & STATUS_PORT_A) ? 'A' : 'B',
+		  STATUS_PACKETS_THIS(status),
+		  (status & STATUS_CONN_THIS) ? " CON" : "",
+		  (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
+		  (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
+
+		  STATUS_PACKETS_OTHER(status),
+		  (status & STATUS_CONN_OTHER) ? " CON" : "",
+		  (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
+		  (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
+
+		  status & STATUS_UNSPEC_MASK);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -284,10 +280,9 @@ static inline void nc_dump_status(struct usbnet *dev, u16 status)
 
 static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
 {
-	if (netif_msg_link(dev))
-		netdev_dbg(dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n",
-			   dev->udev->bus->bus_name, dev->udev->devpath,
-			   ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
+	netif_dbg(dev, link, dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
 }
 
 /*-------------------------------------------------------------------------*/
@@ -332,10 +327,9 @@ static int net1080_reset(struct usbnet *dev)
 			MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
 	dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
 
-	if (netif_msg_link(dev))
-		netdev_info(dev->net, "port %c, peer %sconnected\n",
-			    (status & STATUS_PORT_A) ? 'A' : 'B',
-			    (status & STATUS_CONN_OTHER) ? "" : "dis");
+	netif_info(dev, link, dev->net, "port %c, peer %sconnected\n",
+		   (status & STATUS_PORT_A) ? 'A' : 'B',
+		   (status & STATUS_CONN_OTHER) ? "" : "dis");
 	retval = 0;
 
 done:
@@ -412,8 +406,8 @@ static void nc_ensure_sync(struct usbnet *dev)
 			return;
 		}
 
-		if (netif_msg_rx_err(dev))
-			netdev_dbg(dev->net, "flush net1080; too many framing errors\n");
+		netif_dbg(dev, rx_err, dev->net,
+			  "flush net1080; too many framing errors\n");
 		dev->frame_errors = 0;
 	}
 }
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 44ae8f6d3135..41838773b568 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -132,9 +132,10 @@ static void ctrl_callback(struct urb *urb)
 	case -ENOENT:
 		break;
 	default:
-		if (netif_msg_drv(pegasus) && printk_ratelimit())
-			dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
-				__func__, status);
+		if (net_ratelimit())
+			netif_dbg(pegasus, drv, pegasus->net,
+				  "%s, status %d\n", __func__, status);
+		break;
 	}
 	pegasus->flags &= ~ETH_REGS_CHANGED;
 	wake_up(&pegasus->ctrl_wait);
@@ -149,9 +150,8 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer) {
-		if (netif_msg_drv(pegasus))
-			dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
-					__func__);
+		netif_warn(pegasus, drv, pegasus->net,
+			   "out of memory in %s\n", __func__);
 		return -ENOMEM;
 	}
 	add_wait_queue(&pegasus->ctrl_wait, &wait);
@@ -181,9 +181,9 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 		set_current_state(TASK_RUNNING);
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus) && printk_ratelimit())
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__func__, ret);
+		if (net_ratelimit())
+			netif_err(pegasus, drv, pegasus->net,
+				  "%s, status %d\n", __func__, ret);
 		goto out;
 	}
 
@@ -205,9 +205,8 @@ static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer) {
-		if (netif_msg_drv(pegasus))
-			dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
-					__func__);
+		netif_warn(pegasus, drv, pegasus->net,
+			   "out of memory in %s\n", __func__);
 		return -ENOMEM;
 	}
 	memcpy(buffer, data, size);
@@ -237,9 +236,8 @@ static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__func__, ret);
+		netif_err(pegasus, drv, pegasus->net,
+			  "%s, status %d\n", __func__, ret);
 		goto out;
 	}
 
@@ -259,9 +257,8 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 
 	tmp = kmalloc(1, GFP_KERNEL);
 	if (!tmp) {
-		if (netif_msg_drv(pegasus))
-			dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
-					__func__);
+		netif_warn(pegasus, drv, pegasus->net,
+			   "out of memory in %s\n", __func__);
 		return -ENOMEM;
 	}
 	memcpy(tmp, &data, 1);
@@ -290,9 +287,9 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus) && printk_ratelimit())
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__func__, ret);
+		if (net_ratelimit())
+			netif_err(pegasus, drv, pegasus->net,
+				  "%s, status %d\n", __func__, ret);
 		goto out;
 	}
 
@@ -323,9 +320,8 @@ static int update_eth_regs_async(pegasus_t * pegasus)
 	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__func__, ret);
+		netif_err(pegasus, drv, pegasus->net,
+			  "%s, status %d\n", __func__, ret);
 	}
 
 	return ret;
@@ -349,14 +345,16 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 		if (data[0] & PHY_DONE)
 			break;
 	}
-	if (i < REG_TIMEOUT) {
-		ret = get_registers(pegasus, PhyData, 2, &regdi);
-		*regd = le16_to_cpu(regdi);
-		return ret;
-	}
+
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	ret = get_registers(pegasus, PhyData, 2, &regdi);
+	*regd = le16_to_cpu(regdi);
+	return ret;
+
 fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __func__);
+	netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
 
 	return ret;
 }
@@ -388,12 +386,14 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
 		if (data[0] & PHY_DONE)
 			break;
 	}
-	if (i < REG_TIMEOUT)
-		return ret;
+
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	return ret;
 
 fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __func__);
+	netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
 	return -ETIMEDOUT;
 }
 
@@ -422,15 +422,15 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		if (ret == -ESHUTDOWN)
 			goto fail;
 	}
-	if (i < REG_TIMEOUT) {
-		ret = get_registers(pegasus, EpromData, 2, &retdatai);
-		*retdata = le16_to_cpu(retdatai);
-		return ret;
-	}
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	ret = get_registers(pegasus, EpromData, 2, &retdatai);
+	*retdata = le16_to_cpu(retdatai);
+	return ret;
 
 fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __func__);
+	netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
 	return -ETIMEDOUT;
 }
 
@@ -475,11 +475,13 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
 			break;
 	}
 	disable_eprom_write(pegasus);
-	if (i < REG_TIMEOUT)
-		return ret;
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	return ret;
+
 fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __func__);
+	netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
 	return -ETIMEDOUT;
 }
 #endif				/* PEGASUS_WRITE_EEPROM */
@@ -642,25 +644,20 @@ static void read_bulk_callback(struct urb *urb)
 	case 0:
 		break;
 	case -ETIME:
-		if (netif_msg_rx_err(pegasus))
-			pr_debug("%s: reset MAC\n", net->name);
+		netif_dbg(pegasus, rx_err, net, "reset MAC\n");
 		pegasus->flags &= ~PEGASUS_RX_BUSY;
 		break;
 	case -EPIPE:		/* stall, or disconnect from TT */
 		/* FIXME schedule work to clear the halt */
-		if (netif_msg_rx_err(pegasus))
-			printk(KERN_WARNING "%s: no rx stall recovery\n",
-					net->name);
+		netif_warn(pegasus, rx_err, net, "no rx stall recovery\n");
 		return;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
-		if (netif_msg_ifdown(pegasus))
-			pr_debug("%s: rx unlink, %d\n", net->name, status);
+		netif_dbg(pegasus, ifdown, net, "rx unlink, %d\n", status);
 		return;
 	default:
-		if (netif_msg_rx_err(pegasus))
-			pr_debug("%s: RX status %d\n", net->name, status);
+		netif_dbg(pegasus, rx_err, net, "RX status %d\n", status);
 		goto goon;
 	}
 
@@ -669,9 +666,8 @@ static void read_bulk_callback(struct urb *urb)
 
 	rx_status = buf[count - 2];
 	if (rx_status & 0x1e) {
-		if (netif_msg_rx_err(pegasus))
-			pr_debug("%s: RX packet error %x\n",
-					net->name, rx_status);
+		netif_dbg(pegasus, rx_err, net,
+			  "RX packet error %x\n", rx_status);
 		pegasus->stats.rx_errors++;
 		if (rx_status & 0x06)	// long or runt
 			pegasus->stats.rx_length_errors++;
@@ -758,9 +754,7 @@ static void rx_fixup(unsigned long data)
 		pegasus->rx_skb = pull_skb(pegasus);
 	}
 	if (pegasus->rx_skb == NULL) {
-		if (netif_msg_rx_err(pegasus))
-			printk(KERN_WARNING "%s: low on memory\n",
-					pegasus->net->name);
+		netif_warn(pegasus, rx_err, pegasus->net, "low on memory\n");
 		tasklet_schedule(&pegasus->rx_tl);
 		goto done;
 	}
@@ -800,19 +794,15 @@ static void write_bulk_callback(struct urb *urb)
 	case -EPIPE:
 		/* FIXME schedule_work() to clear the tx halt */
 		netif_stop_queue(net);
-		if (netif_msg_tx_err(pegasus))
-			printk(KERN_WARNING "%s: no tx stall recovery\n",
-					net->name);
+		netif_warn(pegasus, tx_err, net, "no tx stall recovery\n");
 		return;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
-		if (netif_msg_ifdown(pegasus))
-			pr_debug("%s: tx unlink, %d\n", net->name, status);
+		netif_dbg(pegasus, ifdown, net, "tx unlink, %d\n", status);
 		return;
 	default:
-		if (netif_msg_tx_err(pegasus))
-			pr_info("%s: TX status %d\n", net->name, status);
+		netif_info(pegasus, tx_err, net, "TX status %d\n", status);
 		/* FALL THROUGH */
 	case 0:
 		break;
@@ -843,9 +833,7 @@ static void intr_callback(struct urb *urb)
 		/* some Pegasus-I products report LOTS of data
 		 * toggle errors... avoid log spamming
 		 */
-		if (netif_msg_timer(pegasus))
-			pr_debug("%s: intr status %d\n", net->name,
-					status);
+		netif_dbg(pegasus, timer, net, "intr status %d\n", status);
 	}
 
 	if (urb->actual_length >= 6) {
@@ -875,16 +863,15 @@ static void intr_callback(struct urb *urb)
 	res = usb_submit_urb(urb, GFP_ATOMIC);
 	if (res == -ENODEV)
 		netif_device_detach(pegasus->net);
-	if (res && netif_msg_timer(pegasus))
-		printk(KERN_ERR "%s: can't resubmit interrupt urb, %d\n",
-				net->name, res);
+	if (res)
+		netif_err(pegasus, timer, net,
+			  "can't resubmit interrupt urb, %d\n", res);
 }
 
 static void pegasus_tx_timeout(struct net_device *net)
 {
 	pegasus_t *pegasus = netdev_priv(net);
-	if (netif_msg_timer(pegasus))
-		printk(KERN_WARNING "%s: tx timeout\n", net->name);
+	netif_warn(pegasus, timer, net, "tx timeout\n");
 	usb_unlink_urb(pegasus->tx_urb);
 	pegasus->stats.tx_errors++;
 }
@@ -906,9 +893,7 @@ static netdev_tx_t pegasus_start_xmit(struct sk_buff *skb,
 			  pegasus->tx_buff, count,
 			  write_bulk_callback, pegasus);
 	if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
-		if (netif_msg_tx_err(pegasus))
-			printk(KERN_WARNING "%s: fail tx, %d\n",
-					net->name, res);
+		netif_warn(pegasus, tx_err, net, "fail tx, %d\n", res);
 		switch (res) {
 		case -EPIPE:		/* stall, or disconnect from TT */
 			/* cleanup should already have been scheduled */
@@ -952,10 +937,9 @@ static inline void get_interrupt_interval(pegasus_t * pegasus)
 	interval = data >> 8;
 	if (pegasus->usb->speed != USB_SPEED_HIGH) {
 		if (interval < 0x80) {
-			if (netif_msg_timer(pegasus))
-				dev_info(&pegasus->intf->dev, "intr interval "
-					"changed from %ums to %ums\n",
-					interval, 0x80);
+			netif_info(pegasus, timer, pegasus->net,
+				   "intr interval changed from %ums to %ums\n",
+				   interval, 0x80);
 			interval = 0x80;
 			data = (data & 0x00FF) | ((u16)interval << 8);
 #ifdef PEGASUS_WRITE_EEPROM
@@ -1046,8 +1030,7 @@ static int pegasus_open(struct net_device *net)
 	if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
 		if (res == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_ifup(pegasus))
-			pr_debug("%s: failed rx_urb, %d", net->name, res);
+		netif_dbg(pegasus, ifup, net, "failed rx_urb, %d\n", res);
 		goto exit;
 	}
 
@@ -1058,15 +1041,13 @@ static int pegasus_open(struct net_device *net)
 	if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
 		if (res == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_ifup(pegasus))
-			pr_debug("%s: failed intr_urb, %d\n", net->name, res);
+		netif_dbg(pegasus, ifup, net, "failed intr_urb, %d\n", res);
 		usb_kill_urb(pegasus->rx_urb);
 		goto exit;
 	}
 	if ((res = enable_net_traffic(net, pegasus->usb))) {
-		if (netif_msg_ifup(pegasus))
-			pr_debug("%s: can't enable_net_traffic() - %d\n",
-					net->name, res);
+		netif_dbg(pegasus, ifup, net,
+			  "can't enable_net_traffic() - %d\n", res);
 		res = -EIO;
 		usb_kill_urb(pegasus->rx_urb);
 		usb_kill_urb(pegasus->intr_urb);
@@ -1075,8 +1056,7 @@ static int pegasus_open(struct net_device *net)
 	}
 	set_carrier(net);
 	netif_start_queue(net);
-	if (netif_msg_ifup(pegasus))
-		pr_debug("%s: open\n", net->name);
+	netif_dbg(pegasus, ifup, net, "open\n");
 	res = 0;
 exit:
 	return res;
@@ -1230,13 +1210,11 @@ static void pegasus_set_multicast(struct net_device *net)
 
 	if (net->flags & IFF_PROMISC) {
 		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
-		if (netif_msg_link(pegasus))
-			pr_info("%s: Promiscuous mode enabled.\n", net->name);
+		netif_info(pegasus, link, net, "Promiscuous mode enabled\n");
 	} else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
 		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
-		if (netif_msg_link(pegasus))
-			pr_debug("%s: set allmulti\n", net->name);
+		netif_dbg(pegasus, link, net, "set allmulti\n");
 	} else {
 		pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index f01f02401856..4ce331fb1e1e 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -335,8 +335,8 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 
 	dev->maxpacket = usb_maxpacket(dev->udev, dev->out, 1);
 	if (dev->maxpacket == 0) {
-		if (netif_msg_probe(dev))
-			dev_dbg(&intf->dev, "dev->maxpacket can't be 0\n");
+		netif_dbg(dev, probe, dev->net,
+			  "dev->maxpacket can't be 0\n");
 		retval = -EINVAL;
 		goto fail_and_release;
 	}
@@ -394,17 +394,15 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 	}
 	if ((flags & FLAG_RNDIS_PHYM_WIRELESS) &&
 			*phym != RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) {
-		if (netif_msg_probe(dev))
-			dev_dbg(&intf->dev, "driver requires wireless "
-				"physical medium, but device is not.\n");
+		netif_dbg(dev, probe, dev->net,
+			  "driver requires wireless physical medium, but device is not\n");
 		retval = -ENODEV;
 		goto halt_fail_and_release;
 	}
 	if ((flags & FLAG_RNDIS_PHYM_NOT_WIRELESS) &&
 			*phym == RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) {
-		if (netif_msg_probe(dev))
-			dev_dbg(&intf->dev, "driver requires non-wireless "
-				"physical medium, but device is wireless.\n");
+		netif_dbg(dev, probe, dev->net,
+			  "driver requires non-wireless physical medium, but device is wireless.\n");
 		retval = -ENODEV;
 		goto halt_fail_and_release;
 	}
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index d4cbcefbff38..1ada51eb71f7 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -376,13 +376,11 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
 
 	if (dev->net->flags & IFF_PROMISC) {
-		if (netif_msg_drv(dev))
-			netdev_dbg(dev->net, "promiscuous mode enabled\n");
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
 		pdata->mac_cr |= MAC_CR_PRMS_;
 		pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
 	} else if (dev->net->flags & IFF_ALLMULTI) {
-		if (netif_msg_drv(dev))
-			netdev_dbg(dev->net, "receive all multicast enabled\n");
+		netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
 		pdata->mac_cr |= MAC_CR_MCPAS_;
 		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
 	} else if (!netdev_mc_empty(dev->net)) {
@@ -410,12 +408,10 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 		if (count != ((u32) netdev_mc_count(dev->net)))
 			netdev_warn(dev->net, "mc_count != dev->mc_count\n");
 
-		if (netif_msg_drv(dev))
-			netdev_dbg(dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
+		netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
 				   hash_hi, hash_lo);
 	} else {
-		if (netif_msg_drv(dev))
-			netdev_dbg(dev->net, "receive own packets only\n");
+		netif_dbg(dev, drv, dev->net, "receive own packets only\n");
 		pdata->mac_cr &=
 			~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
 	}
@@ -452,13 +448,11 @@ static void smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
 		else
 			afc_cfg &= ~0xF;
 
-		if (netif_msg_link(dev))
-			netdev_dbg(dev->net, "rx pause %s, tx pause %s\n",
+		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
 				   cap & FLOW_CTRL_RX ? "enabled" : "disabled",
 				   cap & FLOW_CTRL_TX ? "enabled" : "disabled");
 	} else {
-		if (netif_msg_link(dev))
-			netdev_dbg(dev->net, "half duplex\n");
+		netif_dbg(dev, link, dev->net, "half duplex\n");
 		flow = 0;
 		afc_cfg |= 0xF;
 	}
@@ -486,9 +480,8 @@ static int smsc95xx_link_reset(struct usbnet *dev)
 	lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
 	rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 
-	if (netif_msg_link(dev))
-		netdev_dbg(dev->net, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x\n",
-			   ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+	netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x\n",
+		  ecmd.speed, ecmd.duplex, lcladv, rmtadv);
 
 	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
 	if (ecmd.duplex != DUPLEX_FULL) {
@@ -520,8 +513,7 @@ static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
 	memcpy(&intdata, urb->transfer_buffer, 4);
 	le32_to_cpus(&intdata);
 
-	if (netif_msg_link(dev))
-		netdev_dbg(dev->net, "intdata: 0x%08X\n", intdata);
+	netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
 
 	if (intdata & INT_ENP_PHY_INT_)
 		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
@@ -557,8 +549,7 @@ static int smsc95xx_set_csums(struct usbnet *dev)
 		return ret;
 	}
 
-	if (netif_msg_hw(dev))
-		netdev_dbg(dev->net, "COE_CR = 0x%08x\n", read_buf);
+	netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
 	return 0;
 }
 
@@ -662,16 +653,14 @@ static void smsc95xx_init_mac_address(struct usbnet *dev)
 			dev->net->dev_addr) == 0) {
 		if (is_valid_ether_addr(dev->net->dev_addr)) {
 			/* eeprom values are valid so use them */
-			if (netif_msg_ifup(dev))
-				netdev_dbg(dev->net, "MAC address read from EEPROM\n");
+			netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n");
 			return;
 		}
 	}
 
 	/* no eeprom, or eeprom values are invalid. generate random MAC */
 	random_ether_addr(dev->net->dev_addr);
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "MAC address set to random_ether_addr\n");
+	netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr\n");
 }
 
 static int smsc95xx_set_mac_address(struct usbnet *dev)
@@ -750,8 +739,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
 		PHY_INT_MASK_DEFAULT_);
 	mii_nway_restart(&dev->mii);
 
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "phy initialised successfully\n");
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
 	return 0;
 }
 
@@ -762,8 +750,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	u32 read_buf, write_buf, burst_cap;
 	int ret = 0, timeout;
 
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "entering smsc95xx_reset\n");
+	netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
 
 	write_buf = HW_CFG_LRST_;
 	ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
@@ -818,8 +805,8 @@ static int smsc95xx_reset(struct usbnet *dev)
 	if (ret < 0)
 		return ret;
 
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "MAC Address: %pM\n", dev->net->dev_addr);
+	netif_dbg(dev, ifup, dev->net,
+		  "MAC Address: %pM\n", dev->net->dev_addr);
 
 	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 	if (ret < 0) {
@@ -827,8 +814,8 @@ static int smsc95xx_reset(struct usbnet *dev)
 		return ret;
 	}
 
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "Read Value from HW_CFG : 0x%08x\n", read_buf);
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG : 0x%08x\n", read_buf);
 
 	read_buf |= HW_CFG_BIR_;
 
@@ -844,9 +831,9 @@ static int smsc95xx_reset(struct usbnet *dev)
 		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
-			   read_buf);
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
+		  read_buf);
 
 	if (!turbo_mode) {
 		burst_cap = 0;
@@ -859,8 +846,8 @@ static int smsc95xx_reset(struct usbnet *dev)
 		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
 	}
 
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
+	netif_dbg(dev, ifup, dev->net,
+		  "rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
 
 	ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
 	if (ret < 0) {
@@ -873,9 +860,9 @@ static int smsc95xx_reset(struct usbnet *dev)
 		netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret);
 		return ret;
 	}
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "Read Value from BURST_CAP after writing: 0x%08x\n",
-			   read_buf);
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BURST_CAP after writing: 0x%08x\n",
+		  read_buf);
 
 	read_buf = DEFAULT_BULK_IN_DELAY;
 	ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
@@ -889,17 +876,17 @@ static int smsc95xx_reset(struct usbnet *dev)
 		netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret);
 		return ret;
 	}
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
-			   read_buf);
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
+		  read_buf);
 
 	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
 	if (ret < 0) {
 		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "Read Value from HW_CFG: 0x%08x\n", read_buf);
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG: 0x%08x\n", read_buf);
 
 	if (turbo_mode)
 		read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
@@ -921,9 +908,8 @@ static int smsc95xx_reset(struct usbnet *dev)
 		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
 		return ret;
 	}
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "Read Value from HW_CFG after writing: 0x%08x\n",
-			   read_buf);
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
 
 	write_buf = 0xFFFFFFFF;
 	ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
@@ -938,8 +924,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 		netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret);
 		return ret;
 	}
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "ID_REV = 0x%08x\n", read_buf);
+	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
 
 	/* Configure GPIO pins as LED outputs */
 	write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
@@ -1013,8 +998,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	smsc95xx_start_tx_path(dev);
 	smsc95xx_start_rx_path(dev);
 
-	if (netif_msg_ifup(dev))
-		netdev_dbg(dev->net, "smsc95xx_reset, return 0\n");
+	netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
 	return 0;
 }
 
@@ -1071,8 +1055,7 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	if (pdata) {
-		if (netif_msg_ifdown(dev))
-			netdev_dbg(dev->net, "free pdata\n");
+		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
 		kfree(pdata);
 		pdata = NULL;
 		dev->data[0] = 0;
@@ -1106,9 +1089,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
 
 		if (unlikely(header & RX_STS_ES_)) {
-			if (netif_msg_rx_err(dev))
-				netdev_dbg(dev->net, "Error header=0x%08x\n",
-					   header);
+			netif_dbg(dev, rx_err, dev->net,
+				  "Error header=0x%08x\n", header);
 			dev->net->stats.rx_errors++;
 			dev->net->stats.rx_dropped++;
 
@@ -1125,9 +1107,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		} else {
 			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
 			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
-				if (netif_msg_rx_err(dev))
-					netdev_dbg(dev->net, "size err header=0x%08x\n",
-						   header);
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err header=0x%08x\n", header);
 				return 0;
 			}
 
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 8e732930d249..17b6a62d206e 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -242,13 +242,13 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
 	dev->net->stats.rx_packets++;
 	dev->net->stats.rx_bytes += skb->len;
 
-	if (netif_msg_rx_status (dev))
-		netdev_dbg(dev->net, "< rx, len %zu, type 0x%x\n",
-			   skb->len + sizeof (struct ethhdr), skb->protocol);
+	netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
+		  skb->len + sizeof (struct ethhdr), skb->protocol);
 	memset (skb->cb, 0, sizeof (struct skb_data));
 	status = netif_rx (skb);
-	if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
-		netdev_dbg(dev->net, "netif_rx status %d\n", status);
+	if (status != NET_RX_SUCCESS)
+		netif_dbg(dev, rx_err, dev->net,
+			  "netif_rx status %d\n", status);
 }
 EXPORT_SYMBOL_GPL(usbnet_skb_return);
 
@@ -332,8 +332,7 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 	size_t			size = dev->rx_urb_size;
 
 	if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
-		if (netif_msg_rx_err (dev))
-			netdev_dbg(dev->net, "no rx skb\n");
+		netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
 		usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
 		usb_free_urb (urb);
 		return;
@@ -363,21 +362,19 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 			usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
 			break;
 		case -ENODEV:
-			if (netif_msg_ifdown (dev))
-				netdev_dbg(dev->net, "device gone\n");
+			netif_dbg(dev, ifdown, dev->net, "device gone\n");
 			netif_device_detach (dev->net);
 			break;
 		default:
-			if (netif_msg_rx_err (dev))
-				netdev_dbg(dev->net, "rx submit, %d\n", retval);
+			netif_dbg(dev, rx_err, dev->net,
+				  "rx submit, %d\n", retval);
 			tasklet_schedule (&dev->bh);
 			break;
 		case 0:
 			__skb_queue_tail (&dev->rxq, skb);
 		}
 	} else {
-		if (netif_msg_ifdown (dev))
-			netdev_dbg(dev->net, "rx: stopped\n");
+		netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
 		retval = -ENOLINK;
 	}
 	spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
@@ -400,8 +397,7 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 	if (skb->len)
 		usbnet_skb_return (dev, skb);
 	else {
-		if (netif_msg_rx_err (dev))
-			netdev_dbg(dev->net, "drop\n");
+		netif_dbg(dev, rx_err, dev->net, "drop\n");
 error:
 		dev->net->stats.rx_errors++;
 		skb_queue_tail (&dev->done, skb);
@@ -428,8 +424,8 @@ static void rx_complete (struct urb *urb)
 			entry->state = rx_cleanup;
 			dev->net->stats.rx_errors++;
 			dev->net->stats.rx_length_errors++;
-			if (netif_msg_rx_err (dev))
-				netdev_dbg(dev->net, "rx length %d\n", skb->len);
+			netif_dbg(dev, rx_err, dev->net,
+				  "rx length %d\n", skb->len);
 		}
 		break;
 
@@ -446,8 +442,8 @@ static void rx_complete (struct urb *urb)
 	/* software-driven interface shutdown */
 	case -ECONNRESET:		/* async unlink */
 	case -ESHUTDOWN:		/* hardware gone */
-		if (netif_msg_ifdown (dev))
-			netdev_dbg(dev->net, "rx shutdown, code %d\n", urb_status);
+		netif_dbg(dev, ifdown, dev->net,
+			  "rx shutdown, code %d\n", urb_status);
 		goto block;
 
 	/* we get controller i/o faults during khubd disconnect() delays.
@@ -460,8 +456,8 @@ static void rx_complete (struct urb *urb)
 		dev->net->stats.rx_errors++;
 		if (!timer_pending (&dev->delay)) {
 			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
-			if (netif_msg_link (dev))
-				netdev_dbg(dev->net, "rx throttle %d\n", urb_status);
+			netif_dbg(dev, link, dev->net,
+				  "rx throttle %d\n", urb_status);
 		}
 block:
 		entry->state = rx_cleanup;
@@ -477,8 +473,7 @@ block:
 	default:
 		entry->state = rx_cleanup;
 		dev->net->stats.rx_errors++;
-		if (netif_msg_rx_err (dev))
-			netdev_dbg(dev->net, "rx status %d\n", urb_status);
+		netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
 		break;
 	}
 
@@ -492,8 +487,7 @@ block:
 		}
 		usb_free_urb (urb);
 	}
-	if (netif_msg_rx_err (dev))
-		netdev_dbg(dev->net, "no read resubmitted\n");
+	netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
 }
 
 static void intr_complete (struct urb *urb)
@@ -510,8 +504,8 @@ static void intr_complete (struct urb *urb)
 	/* software-driven interface shutdown */
 	case -ENOENT:		/* urb killed */
 	case -ESHUTDOWN:	/* hardware gone */
-		if (netif_msg_ifdown (dev))
-			netdev_dbg(dev->net, "intr shutdown, code %d\n", status);
+		netif_dbg(dev, ifdown, dev->net,
+			  "intr shutdown, code %d\n", status);
 		return;
 
 	/* NOTE:  not throttling like RX/TX, since this endpoint
@@ -527,8 +521,9 @@ static void intr_complete (struct urb *urb)
 
 	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
 	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status != 0 && netif_msg_timer (dev))
-		netdev_err(dev->net, "intr resubmit --> %d\n", status);
+	if (status != 0)
+		netif_err(dev, timer, dev->net,
+			  "intr resubmit --> %d\n", status);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -536,8 +531,7 @@ void usbnet_pause_rx(struct usbnet *dev)
 {
 	set_bit(EVENT_RX_PAUSED, &dev->flags);
 
-	if (netif_msg_rx_status(dev))
-		netdev_dbg(dev->net, "paused rx queue enabled\n");
+	netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
 }
 EXPORT_SYMBOL_GPL(usbnet_pause_rx);
 
@@ -555,9 +549,8 @@ void usbnet_resume_rx(struct usbnet *dev)
 
 	tasklet_schedule(&dev->bh);
 
-	if (netif_msg_rx_status(dev))
-		netdev_dbg(dev->net, "paused rx queue disabled, %d skbs requeued\n",
-			   num);
+	netif_dbg(dev, rx_status, dev->net,
+		  "paused rx queue disabled, %d skbs requeued\n", num);
 }
 EXPORT_SYMBOL_GPL(usbnet_resume_rx);
 
@@ -632,9 +625,8 @@ static void usbnet_terminate_urbs(struct usbnet *dev)
 		&& !skb_queue_empty(&dev->done)) {
 			schedule_timeout(UNLINK_TIMEOUT_MS);
 			set_current_state(TASK_UNINTERRUPTIBLE);
-			if (netif_msg_ifdown(dev))
-				netdev_dbg(dev->net, "waited for %d urb completions\n",
-					   temp);
+			netif_dbg(dev, ifdown, dev->net,
+				  "waited for %d urb completions\n", temp);
 	}
 	set_current_state(TASK_RUNNING);
 	dev->wait = NULL;
@@ -649,21 +641,21 @@ int usbnet_stop (struct net_device *net)
 
 	netif_stop_queue (net);
 
-	if (netif_msg_ifdown (dev))
-		netdev_info(dev->net, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
-			    net->stats.rx_packets, net->stats.tx_packets,
-			    net->stats.rx_errors, net->stats.tx_errors);
+	netif_info(dev, ifdown, dev->net,
+		   "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
+		   net->stats.rx_packets, net->stats.tx_packets,
+		   net->stats.rx_errors, net->stats.tx_errors);
 
 	/* allow minidriver to stop correctly (wireless devices to turn off
 	 * radio etc) */
 	if (info->stop) {
 		retval = info->stop(dev);
-		if (retval < 0 && netif_msg_ifdown(dev))
-			netdev_info(dev->net,
-				    "stop fail (%d) usbnet usb-%s-%s, %s\n",
-				    retval,
-				    dev->udev->bus->bus_name, dev->udev->devpath,
-				    info->description);
+		if (retval < 0)
+			netif_info(dev, ifdown, dev->net,
+				   "stop fail (%d) usbnet usb-%s-%s, %s\n",
+				   retval,
+				   dev->udev->bus->bus_name, dev->udev->devpath,
+				   info->description);
 	}
 
 	if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
@@ -702,32 +694,29 @@ int usbnet_open (struct net_device *net)
 	struct driver_info	*info = dev->driver_info;
 
 	if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
-		if (netif_msg_ifup (dev))
-			netdev_info(dev->net,
-				    "resumption fail (%d) usbnet usb-%s-%s, %s\n",
-				    retval,
-				    dev->udev->bus->bus_name,
-				    dev->udev->devpath,
-				    info->description);
+		netif_info(dev, ifup, dev->net,
+			   "resumption fail (%d) usbnet usb-%s-%s, %s\n",
+			   retval,
+			   dev->udev->bus->bus_name,
+			   dev->udev->devpath,
+			   info->description);
 		goto done_nopm;
 	}
 
 	// put into "known safe" state
 	if (info->reset && (retval = info->reset (dev)) < 0) {
-		if (netif_msg_ifup (dev))
-			netdev_info(dev->net,
-				    "open reset fail (%d) usbnet usb-%s-%s, %s\n",
-				    retval,
-				    dev->udev->bus->bus_name,
-				    dev->udev->devpath,
-				    info->description);
+		netif_info(dev, ifup, dev->net,
+			   "open reset fail (%d) usbnet usb-%s-%s, %s\n",
+			   retval,
+			   dev->udev->bus->bus_name,
+			   dev->udev->devpath,
+			   info->description);
 		goto done;
 	}
 
 	// insist peer be connected
 	if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
-		if (netif_msg_ifup (dev))
-			netdev_dbg(dev->net, "can't open; %d\n", retval);
+		netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
 		goto done;
 	}
 
@@ -735,33 +724,23 @@ int usbnet_open (struct net_device *net)
 	if (dev->interrupt) {
 		retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
 		if (retval < 0) {
-			if (netif_msg_ifup (dev))
-				netdev_err(dev->net, "intr submit %d\n", retval);
+			netif_err(dev, ifup, dev->net,
+				  "intr submit %d\n", retval);
 			goto done;
 		}
 	}
 
 	netif_start_queue (net);
-	if (netif_msg_ifup (dev)) {
-		char	*framing;
-
-		if (dev->driver_info->flags & FLAG_FRAMING_NC)
-			framing = "NetChip";
-		else if (dev->driver_info->flags & FLAG_FRAMING_GL)
-			framing = "GeneSys";
-		else if (dev->driver_info->flags & FLAG_FRAMING_Z)
-			framing = "Zaurus";
-		else if (dev->driver_info->flags & FLAG_FRAMING_RN)
-			framing = "RNDIS";
-		else if (dev->driver_info->flags & FLAG_FRAMING_AX)
-			framing = "ASIX";
-		else
-			framing = "simple";
-
-		netdev_info(dev->net, "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
-			    (int)RX_QLEN(dev), (int)TX_QLEN(dev),
-			    dev->net->mtu, framing);
-	}
+	netif_info(dev, ifup, dev->net,
+		   "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
+		   (int)RX_QLEN(dev), (int)TX_QLEN(dev),
+		   dev->net->mtu,
+		   (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
+		   (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
+		   (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
+		   (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
+		   (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
+		   "simple");
 
 	// delay posting reads until we're fully open
 	tasklet_schedule (&dev->bh);
@@ -772,6 +751,7 @@ int usbnet_open (struct net_device *net)
 		usb_autopm_put_interface(dev->intf);
 	}
 	return retval;
+
 done:
 	usb_autopm_put_interface(dev->intf);
 done_nopm:
@@ -1015,16 +995,14 @@ static void tx_complete (struct urb *urb)
 			if (!timer_pending (&dev->delay)) {
 				mod_timer (&dev->delay,
 					jiffies + THROTTLE_JIFFIES);
-				if (netif_msg_link (dev))
-					netdev_dbg(dev->net, "tx throttle %d\n",
-						   urb->status);
+				netif_dbg(dev, link, dev->net,
+					  "tx throttle %d\n", urb->status);
 			}
 			netif_stop_queue (dev->net);
 			break;
 		default:
-			if (netif_msg_tx_err (dev))
-				netdev_dbg(dev->net, "tx err %d\n",
-					   entry->urb->status);
+			netif_dbg(dev, tx_err, dev->net,
+				  "tx err %d\n", entry->urb->status);
 			break;
 		}
 	}
@@ -1066,16 +1044,14 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 	if (info->tx_fixup) {
 		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
 		if (!skb) {
-			if (netif_msg_tx_err (dev))
-				netdev_dbg(dev->net, "can't tx_fixup skb\n");
+			netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
 			goto drop;
 		}
 	}
 	length = skb->len;
 
 	if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
-		if (netif_msg_tx_err (dev))
-			netdev_dbg(dev->net, "no urb\n");
+		netif_dbg(dev, tx_err, dev->net, "no urb\n");
 		goto drop;
 	}
 
@@ -1128,8 +1104,8 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 		break;
 	default:
 		usb_autopm_put_interface_async(dev->intf);
-		if (netif_msg_tx_err (dev))
-			netdev_dbg(dev->net, "tx: submit urb err %d\n", retval);
+		netif_dbg(dev, tx_err, dev->net,
+			  "tx: submit urb err %d\n", retval);
 		break;
 	case 0:
 		net->trans_start = jiffies;
@@ -1140,17 +1116,15 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 	spin_unlock_irqrestore (&dev->txq.lock, flags);
 
 	if (retval) {
-		if (netif_msg_tx_err (dev))
-			netdev_dbg(dev->net, "drop, code %d\n", retval);
+		netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
 drop:
 		dev->net->stats.tx_dropped++;
 		if (skb)
 			dev_kfree_skb_any (skb);
 		usb_free_urb (urb);
-	} else if (netif_msg_tx_queued (dev)) {
-		netdev_dbg(dev->net, "> tx, len %d, type 0x%x\n",
-			   length, skb->protocol);
-	}
+	} else
+		netif_dbg(dev, tx_queued, dev->net,
+			  "> tx, len %d, type 0x%x\n", length, skb->protocol);
 #ifdef CONFIG_PM
 deferred:
 #endif
@@ -1209,9 +1183,10 @@ static void usbnet_bh (unsigned long param)
 				if (urb != NULL)
 					rx_submit (dev, urb, GFP_ATOMIC);
 			}
-			if (temp != dev->rxq.qlen && netif_msg_link (dev))
-				netdev_dbg(dev->net, "rxqlen %d --> %d\n",
-					   temp, dev->rxq.qlen);
+			if (temp != dev->rxq.qlen)
+				netif_dbg(dev, link, dev->net,
+					  "rxqlen %d --> %d\n",
+					  temp, dev->rxq.qlen);
 			if (dev->rxq.qlen < qlen)
 				tasklet_schedule (&dev->bh);
 		}
@@ -1242,11 +1217,10 @@ void usbnet_disconnect (struct usb_interface *intf)
 
 	xdev = interface_to_usbdev (intf);
 
-	if (netif_msg_probe (dev))
-		netdev_info(dev->net, "unregister '%s' usb-%s-%s, %s\n",
-			    intf->dev.driver->name,
-			    xdev->bus->bus_name, xdev->devpath,
-			    dev->driver_info->description);
+	netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
+		   intf->dev.driver->name,
+		   xdev->bus->bus_name, xdev->devpath,
+		   dev->driver_info->description);
 
 	net = dev->net;
 	unregister_netdev (net);
@@ -1409,12 +1383,12 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	status = register_netdev (net);
 	if (status)
 		goto out3;
-	if (netif_msg_probe (dev))
-		netdev_info(dev->net, "register '%s' at usb-%s-%s, %s, %pM\n",
-			    udev->dev.driver->name,
-			    xdev->bus->bus_name, xdev->devpath,
-			    dev->driver_info->description,
-			    net->dev_addr);
+	netif_info(dev, probe, dev->net,
+		   "register '%s' at usb-%s-%s, %s, %pM\n",
+		   udev->dev.driver->name,
+		   xdev->bus->bus_name, xdev->devpath,
+		   dev->driver_info->description,
+		   net->dev_addr);
 
 	// ok, it's ready to go.
 	usb_set_intfdata (udev, dev);
-- 
cgit v1.2.3


From 6cbe5065bb367d4c8db0a71d2e828995bcfae336 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Wed, 17 Feb 2010 02:03:27 +0000
Subject: bnx2x: Properly release allocated MSI-X/MSI vectors

Bug fix: Properly release allocated MSI-X/MSI vectors if ifup failed
due to lack of memory.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 6d8559052ee6..d7aef840a1d5 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -6938,19 +6938,21 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp)
 	}
 }
 
-static void bnx2x_free_irq(struct bnx2x *bp)
+static void bnx2x_free_irq(struct bnx2x *bp, bool disable_only)
 {
 	if (bp->flags & USING_MSIX_FLAG) {
-		bnx2x_free_msix_irqs(bp);
+		if (!disable_only)
+			bnx2x_free_msix_irqs(bp);
 		pci_disable_msix(bp->pdev);
 		bp->flags &= ~USING_MSIX_FLAG;
 
 	} else if (bp->flags & USING_MSI_FLAG) {
-		free_irq(bp->pdev->irq, bp->dev);
+		if (!disable_only)
+			free_irq(bp->pdev->irq, bp->dev);
 		pci_disable_msi(bp->pdev);
 		bp->flags &= ~USING_MSI_FLAG;
 
-	} else
+	} else if (!disable_only)
 		free_irq(bp->pdev->irq, bp->dev);
 }
 
@@ -7443,8 +7445,10 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	rc = bnx2x_set_num_queues(bp);
 
-	if (bnx2x_alloc_mem(bp))
+	if (bnx2x_alloc_mem(bp)) {
+		bnx2x_free_irq(bp, true);
 		return -ENOMEM;
+	}
 
 	for_each_queue(bp, i)
 		bnx2x_fp(bp, i, disable_tpa) =
@@ -7459,7 +7463,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	if (bp->flags & USING_MSIX_FLAG) {
 		rc = bnx2x_req_msix_irqs(bp);
 		if (rc) {
-			pci_disable_msix(bp->pdev);
+			bnx2x_free_irq(bp, true);
 			goto load_error1;
 		}
 	} else {
@@ -7471,8 +7475,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		rc = bnx2x_req_irq(bp);
 		if (rc) {
 			BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
-			if (bp->flags & USING_MSI_FLAG)
-				pci_disable_msi(bp->pdev);
+			bnx2x_free_irq(bp, true);
 			goto load_error1;
 		}
 		if (bp->flags & USING_MSI_FLAG) {
@@ -7664,7 +7667,7 @@ load_error3:
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 load_error2:
 	/* Release IRQs */
-	bnx2x_free_irq(bp);
+	bnx2x_free_irq(bp, false);
 load_error1:
 	bnx2x_napi_disable(bp);
 	for_each_queue(bp, i)
@@ -7855,7 +7858,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
 	/* Release IRQs */
-	bnx2x_free_irq(bp);
+	bnx2x_free_irq(bp, false);
 
 	/* Wait until tx fastpath tasks complete */
 	for_each_queue(bp, i) {
@@ -12299,7 +12302,7 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
 
 	/* Release IRQs */
-	bnx2x_free_irq(bp);
+	bnx2x_free_irq(bp, false);
 
 	if (CHIP_IS_E1(bp)) {
 		struct mac_configuration_cmd *config =
-- 
cgit v1.2.3


From f1e1a199f3a68a32cf86095b3650d761ee8798b9 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Wed, 17 Feb 2010 02:03:33 +0000
Subject: bnx2x: clean up in case of error in bnx2x_init_hw()

Bug fix: clean up MCP state in case of error in bnx2x_init_hw().

Author: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index d7aef840a1d5..16685a153c10 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -7530,6 +7530,9 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
+		bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
 		goto load_error2;
 	}
 
-- 
cgit v1.2.3


From d43a7e67ae2f911765b3d5b6cbb85221a9ffd0a4 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Wed, 17 Feb 2010 02:03:40 +0000
Subject: bnx2x: Do not allow enabling LRO if disable_tpa=1

Bug fix: Do not allow enabling LRO if disable_tpa=1.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 16685a153c10..ccdc3fe13414 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -9968,12 +9968,14 @@ static int bnx2x_set_flags(struct net_device *dev, u32 data)
 
 	/* TPA requires Rx CSUM offloading */
 	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
-		if (!(dev->features & NETIF_F_LRO)) {
-			dev->features |= NETIF_F_LRO;
-			bp->flags |= TPA_ENABLE_FLAG;
-			changed = 1;
-		}
-
+		if (!disable_tpa) {
+			if (!(dev->features & NETIF_F_LRO)) {
+				dev->features |= NETIF_F_LRO;
+				bp->flags |= TPA_ENABLE_FLAG;
+				changed = 1;
+			}
+		} else
+			rc = -EINVAL;
 	} else if (dev->features & NETIF_F_LRO) {
 		dev->features &= ~NETIF_F_LRO;
 		bp->flags &= ~TPA_ENABLE_FLAG;
-- 
cgit v1.2.3


From 0c43f43f48c5c60d62c4d26917da3ee71df464ea Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Wed, 17 Feb 2010 02:04:00 +0000
Subject: bnx2x: fix in 57710 self-test

Bug fix: Use the last unicast entry in CAM in bnx2x_test_int(). Relevant for 57710 only.

Author: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ccdc3fe13414..24fe083ee1be 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -10433,7 +10433,8 @@ static int bnx2x_test_intr(struct bnx2x *bp)
 
 	config->hdr.length = 0;
 	if (CHIP_IS_E1(bp))
-		config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
+		/* use last unicast entries */
+		config->hdr.offset = (BP_PORT(bp) ? 63 : 31);
 	else
 		config->hdr.offset = BP_FUNC(bp);
 	config->hdr.client_id = bp->fp->cl_id;
-- 
cgit v1.2.3


From 3359fced77f6b4ba1c7de9deace1d7dfa7217bbc Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Wed, 17 Feb 2010 13:35:01 -0800
Subject: bnx2x: Use firmware 5.2.13

Switch to the new firmware version (5.2.13).

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h          |  4 ++--
 drivers/net/bnx2x_fw_defs.h  |  7 ++++++-
 drivers/net/bnx2x_hsi.h      | 10 ++++++----
 drivers/net/bnx2x_init_ops.h | 13 +++++++++----
 drivers/net/bnx2x_main.c     |  2 +-
 firmware/Makefile            |  2 +-
 firmware/WHENCE              |  6 +++---
 7 files changed, 28 insertions(+), 16 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 602ab86b6392..d997d8472ee5 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -130,7 +130,7 @@
 				 offset, len32); \
 	} while (0)
 
-#define VIRT_WR_DMAE_LEN(bp, data, addr, len32) \
+#define VIRT_WR_DMAE_LEN(bp, data, addr, len32, le32_swap) \
 	do { \
 		memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
 		bnx2x_write_big_buf_wb(bp, addr, len32); \
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index 931dcace5628..08d71bf438d6 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
 /* bnx2x_fw_defs.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -471,6 +471,11 @@
 
 
 /* Host coalescing constants */
+#define HC_IGU_BC_MODE 0
+#define HC_IGU_NBC_MODE 1
+
+#define HC_REGULAR_SEGMENT 0
+#define HC_DEFAULT_SEGMENT 1
 
 /* index numbers */
 #define HC_USTORM_DEF_SB_NUM_INDICES 8
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 52585338ada8..760069345b11 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1,6 +1,6 @@
 /* bnx2x_hsi.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1261,7 +1261,7 @@ struct host_func_stats {
 
 #define BCM_5710_FW_MAJOR_VERSION			5
 #define BCM_5710_FW_MINOR_VERSION			2
-#define BCM_5710_FW_REVISION_VERSION			7
+#define BCM_5710_FW_REVISION_VERSION			13
 #define BCM_5710_FW_ENGINEERING_VERSION 		0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
@@ -2433,8 +2433,10 @@ struct common_ramrod_eth_rx_cqe {
 	u8 ramrod_type;
 #define COMMON_RAMROD_ETH_RX_CQE_TYPE (0x1<<0)
 #define COMMON_RAMROD_ETH_RX_CQE_TYPE_SHIFT 0
-#define COMMON_RAMROD_ETH_RX_CQE_RESERVED0 (0x7F<<1)
-#define COMMON_RAMROD_ETH_RX_CQE_RESERVED0_SHIFT 1
+#define COMMON_RAMROD_ETH_RX_CQE_ERROR (0x1<<1)
+#define COMMON_RAMROD_ETH_RX_CQE_ERROR_SHIFT 1
+#define COMMON_RAMROD_ETH_RX_CQE_RESERVED0 (0x3F<<2)
+#define COMMON_RAMROD_ETH_RX_CQE_RESERVED0_SHIFT 2
 	u8 conn_type;
 	__le16 reserved1;
 	__le32 conn_and_cmd_data;
diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h
index 38b970a14fd7..2b1363a6fe78 100644
--- a/drivers/net/bnx2x_init_ops.h
+++ b/drivers/net/bnx2x_init_ops.h
@@ -2,7 +2,7 @@
  *               Static functions needed during the initialization.
  *               This file is "included" in bnx2x_main.c.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -138,11 +138,16 @@ static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
 static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
 			     u32 len)
 {
+	const u32 *old_data = data;
+
 	data = (const u32 *)bnx2x_sel_blob(bp, addr, (const u8 *)data);
 
-	if (bp->dmae_ready)
-		VIRT_WR_DMAE_LEN(bp, data, addr, len);
-	else
+	if (bp->dmae_ready) {
+		if (old_data != data)
+			VIRT_WR_DMAE_LEN(bp, data, addr, len, 1);
+		else
+			VIRT_WR_DMAE_LEN(bp, data, addr, len, 0);
+	} else
 		bnx2x_init_ind_wr(bp, addr, data, len);
 }
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 24fe083ee1be..164a5e875d4f 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1,6 +1,6 @@
 /* bnx2x_main.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/firmware/Makefile b/firmware/Makefile
index 1c0be73c8082..8af0fc7210b1 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,7 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.7.0.fw bnx2x-e1h-5.2.7.0.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.13.0.fw bnx2x-e1h-5.2.13.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j9.fw \
 			     bnx2/bnx2-rv2p-09-5.0.0.j10.fw \
 			     bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index ac174feda7cb..e8e550fa2423 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -679,11 +679,11 @@ Found in hex form in kernel source.
 
 Driver: bnx2x: Broadcom Everest
 
-File: bnx2x-e1-5.2.7.0.fw.ihex
-File: bnx2x-e1h-5.2.7.0.fw.ihex
+File: bnx2x-e1-5.2.13.0.fw
+File: bnx2x-e1h-5.2.13.0.fw
 
 License:
-  Copyright (c) 2007-2009 Broadcom Corporation
+  Copyright (c) 2007-2010 Broadcom Corporation
 
   This file contains firmware data derived from proprietary unpublished
   source code, Copyright (c) 2007-2009 Broadcom Corporation.
-- 
cgit v1.2.3


From a07da6df730b1fef933f66c03b0e51d5e7ad5b3e Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Wed, 17 Feb 2010 02:05:54 +0000
Subject: bnx2x: version number and date

Updated release version and date: 1.52.1-6 and 2010/02/16

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 164a5e875d4f..a4e8460ff656 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,8 +57,8 @@
 #include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.52.1-5"
-#define DRV_MODULE_RELDATE	"2009/11/09"
+#define DRV_MODULE_VERSION	"1.52.1-6"
+#define DRV_MODULE_RELDATE	"2010/02/16"
 #define BNX2X_BC_VER		0x040200
 
 #include <linux/firmware.h>
-- 
cgit v1.2.3


From 08326dbe7b5825295ec3711eec53b093549749e5 Mon Sep 17 00:00:00 2001
From: Riccardo Ghetta <birrachiara@tin.it>
Date: Wed, 17 Feb 2010 09:28:58 +0000
Subject: SiS190/191 half-duplex initialization fix

Adds half-duplex specific setup code (taken from SiS own GPL driver).
Without those, half-duplex connections are very unreliable, often
working on small transfers and failing after a while.

Signed-off-by: Riccardo Ghetta <birrachiara@tin.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sis190.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 8c4e38f9ebf7..bf2ffbb913ff 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -47,7 +47,7 @@
 #define PHY_ID_ANY		0x1f
 #define MII_REG_ANY		0x1f
 
-#define DRV_VERSION		"1.3"
+#define DRV_VERSION		"1.4"
 #define DRV_NAME		"sis190"
 #define SIS190_DRIVER_NAME	DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
 #define PFX DRV_NAME ": "
@@ -294,6 +294,7 @@ struct sis190_private {
 	struct mii_if_info mii_if;
 	struct list_head first_phy;
 	u32 features;
+	u32 negotiated_lpa;
 };
 
 struct sis190_phy {
@@ -1004,6 +1005,8 @@ static void sis190_phy_task(struct work_struct *work)
 			SIS_W32(RGDelay, 0x0440);
 		}
 
+		tp->negotiated_lpa = p->val;
+
 		net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
 			 p->msg);
 		netif_carrier_on(dev);
@@ -1211,6 +1214,12 @@ static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
 	wmb();
 
 	desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit);
+	if (tp->negotiated_lpa & (LPA_1000HALF | LPA_100HALF | LPA_10HALF)) {
+		/* Half Duplex */
+		desc->status |= cpu_to_le32(COLEN | CRSEN | BKFEN);
+		if (tp->negotiated_lpa & (LPA_1000HALF | LPA_1000FULL))
+			desc->status |= cpu_to_le32(EXTEN | BSTEN); /* gigabit HD */
+	}
 
 	tp->cur_tx++;
 
-- 
cgit v1.2.3


From 25cca5352712561fba97bd37c495593d641c1d39 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Thu, 11 Feb 2010 10:26:38 +0000
Subject: ipg: Remove device claimed by dl2k from pci id table

This patch removes D-Link DGE-550T PCI ID (1186:4000) from the ipg
driver. The ipg driver is for IP2000-based cards and the DGE-550T is
a DL2000-based card. The driver loads and works for a few moments, but
once a real workload is applied it stops operating. The ipg driver
claimed this ID since it was introduced in 2.6.24 and it's forced many
users to blacklist it.

The correct driver for this hardware is the dl2k driver, which has been
claiming this PCI ID since the 2.4 days.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ipg.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dbdebd5efe86..3ca49e348c9d 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -88,7 +88,6 @@ static const char *ipg_brand_name[] = {
 	"Sundance Technology ST2021 based NIC",
 	"Tamarack Microelectronics TC9020/9021 based NIC",
 	"Tamarack Microelectronics TC9020/9021 based NIC",
-	"D-Link NIC",
 	"D-Link NIC IP1000A"
 };
 
@@ -97,8 +96,7 @@ static DEFINE_PCI_DEVICE_TABLE(ipg_pci_tbl) = {
 	{ PCI_VDEVICE(SUNDANCE,	0x2021), 1 },
 	{ PCI_VDEVICE(SUNDANCE,	0x1021), 2 },
 	{ PCI_VDEVICE(DLINK,	0x9021), 3 },
-	{ PCI_VDEVICE(DLINK,	0x4000), 4 },
-	{ PCI_VDEVICE(DLINK,	0x4020), 5 },
+	{ PCI_VDEVICE(DLINK,	0x4020), 4 },
 	{ 0, }
 };
 
-- 
cgit v1.2.3


From b6ca430599ea37843632b0eaa231dea5414dec25 Mon Sep 17 00:00:00 2001
From: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date: Thu, 11 Feb 2010 05:39:55 +0000
Subject: via-velocity: Enable scatter/gather IO by default

Reduces CPU utilization significantly with sendfile for example.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/via-velocity.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index cd4e866321f8..4e47f2683b83 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2825,7 +2825,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 	netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
 
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
-		NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
+		NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM | NETIF_F_SG;
 
 	ret = register_netdev(dev);
 	if (ret < 0)
-- 
cgit v1.2.3


From d4c41139df6e74c6fff0cbac43e51cab782133be Mon Sep 17 00:00:00 2001
From: Kristoffer Glembo <kristoffer@gaisler.com>
Date: Mon, 15 Feb 2010 03:33:44 +0000
Subject: net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver

Adds device driver for Aeroflex Gaisler 10/100 and 10/100/1G Ethernet
MAC IP cores.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 MAINTAINERS          |    6 +
 drivers/net/Kconfig  |    8 +
 drivers/net/Makefile |    1 +
 drivers/net/greth.c  | 1645 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/greth.h  |  143 +++++
 5 files changed, 1803 insertions(+)
 create mode 100644 drivers/net/greth.c
 create mode 100644 drivers/net/greth.h

(limited to 'drivers/net')

diff --git a/MAINTAINERS b/MAINTAINERS
index 64a237bb01ab..32f6915ae0eb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2373,6 +2373,12 @@ F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
+GRETH 10/100/1G Ethernet MAC device driver
+M:	Kristoffer Glembo <kristoffer@gaisler.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/greth*
+
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 M:	Frank Seidel <frank@f-seidel.de>
 L:	lm-sensors@lm-sensors.org
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 069057796bd7..17ff15f6099a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -995,6 +995,14 @@ config ETHOC
 	help
 	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
 
+config GRETH
+	tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
+	depends on OF
+	select PHYLIB
+	select CRC32
+	help
+	  Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
+
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 622cfd450d48..478886234c28 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -250,6 +250,7 @@ pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o
+obj-$(CONFIG_GRETH) += greth.o
 
 obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
new file mode 100644
index 000000000000..457da1c2383c
--- /dev/null
+++ b/drivers/net/greth.c
@@ -0,0 +1,1645 @@
+/*
+ * Aeroflex Gaisler GRETH 10/100/1G Ethernet MAC.
+ *
+ * 2005-2009 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports GRETH 10/100 and GRETH 10/100/1G Ethernet MACs
+ * available in the GRLIB VHDL IP core library.
+ *
+ * Full documentation of both cores can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * The Gigabit version supports scatter/gather DMA, any alignment of
+ * buffers and checksum offloading.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Contributors: Kristoffer Glembo
+ *               Daniel Hellstrom
+ *               Marko Isomaki
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <asm/cacheflush.h>
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_SPARC
+#include <asm/idprom.h>
+#endif
+
+#include "greth.h"
+
+#define GRETH_DEF_MSG_ENABLE	  \
+	(NETIF_MSG_DRV		| \
+	 NETIF_MSG_PROBE	| \
+	 NETIF_MSG_LINK		| \
+	 NETIF_MSG_IFDOWN	| \
+	 NETIF_MSG_IFUP		| \
+	 NETIF_MSG_RX_ERR	| \
+	 NETIF_MSG_TX_ERR)
+
+static int greth_debug = -1;	/* -1 == use GRETH_DEF_MSG_ENABLE as value */
+module_param(greth_debug, int, 0);
+MODULE_PARM_DESC(greth_debug, "GRETH bitmapped debugging message enable value");
+
+/* Accept MAC address of the form macaddr=0x08,0x00,0x20,0x30,0x40,0x50 */
+static int macaddr[6];
+module_param_array(macaddr, int, NULL, 0);
+MODULE_PARM_DESC(macaddr, "GRETH Ethernet MAC address");
+
+static int greth_edcl = 1;
+module_param(greth_edcl, int, 0);
+MODULE_PARM_DESC(greth_edcl, "GRETH EDCL usage indicator. Set to 1 if EDCL is used.");
+
+static int greth_open(struct net_device *dev);
+static int greth_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev);
+static int greth_rx(struct net_device *dev, int limit);
+static int greth_rx_gbit(struct net_device *dev, int limit);
+static void greth_clean_tx(struct net_device *dev);
+static void greth_clean_tx_gbit(struct net_device *dev);
+static irqreturn_t greth_interrupt(int irq, void *dev_id);
+static int greth_close(struct net_device *dev);
+static int greth_set_mac_add(struct net_device *dev, void *p);
+static void greth_set_multicast_list(struct net_device *dev);
+
+#define GRETH_REGLOAD(a)	    (be32_to_cpu(__raw_readl(&(a))))
+#define GRETH_REGSAVE(a, v)         (__raw_writel(cpu_to_be32(v), &(a)))
+#define GRETH_REGORIN(a, v)         (GRETH_REGSAVE(a, (GRETH_REGLOAD(a) | (v))))
+#define GRETH_REGANDIN(a, v)        (GRETH_REGSAVE(a, (GRETH_REGLOAD(a) & (v))))
+
+#define NEXT_TX(N)      (((N) + 1) & GRETH_TXBD_NUM_MASK)
+#define SKIP_TX(N, C)   (((N) + C) & GRETH_TXBD_NUM_MASK)
+#define NEXT_RX(N)      (((N) + 1) & GRETH_RXBD_NUM_MASK)
+
+static void greth_print_rx_packet(void *addr, int len)
+{
+	print_hex_dump(KERN_DEBUG, "RX: ", DUMP_PREFIX_OFFSET, 16, 1,
+			addr, len, true);
+}
+
+static void greth_print_tx_packet(struct sk_buff *skb)
+{
+	int i;
+	int length;
+
+	if (skb_shinfo(skb)->nr_frags == 0)
+		length = skb->len;
+	else
+		length = skb_headlen(skb);
+
+	print_hex_dump(KERN_DEBUG, "TX: ", DUMP_PREFIX_OFFSET, 16, 1,
+			skb->data, length, true);
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+
+		print_hex_dump(KERN_DEBUG, "TX: ", DUMP_PREFIX_OFFSET, 16, 1,
+			       phys_to_virt(page_to_phys(skb_shinfo(skb)->frags[i].page)) +
+			       skb_shinfo(skb)->frags[i].page_offset,
+			       length, true);
+	}
+}
+
+static inline void greth_enable_tx(struct greth_private *greth)
+{
+	wmb();
+	GRETH_REGORIN(greth->regs->control, GRETH_TXEN);
+}
+
+static inline void greth_disable_tx(struct greth_private *greth)
+{
+	GRETH_REGANDIN(greth->regs->control, ~GRETH_TXEN);
+}
+
+static inline void greth_enable_rx(struct greth_private *greth)
+{
+	wmb();
+	GRETH_REGORIN(greth->regs->control, GRETH_RXEN);
+}
+
+static inline void greth_disable_rx(struct greth_private *greth)
+{
+	GRETH_REGANDIN(greth->regs->control, ~GRETH_RXEN);
+}
+
+static inline void greth_enable_irqs(struct greth_private *greth)
+{
+	GRETH_REGORIN(greth->regs->control, GRETH_RXI | GRETH_TXI);
+}
+
+static inline void greth_disable_irqs(struct greth_private *greth)
+{
+	GRETH_REGANDIN(greth->regs->control, ~(GRETH_RXI|GRETH_TXI));
+}
+
+static inline void greth_write_bd(u32 *bd, u32 val)
+{
+	__raw_writel(cpu_to_be32(val), bd);
+}
+
+static inline u32 greth_read_bd(u32 *bd)
+{
+	return be32_to_cpu(__raw_readl(bd));
+}
+
+static void greth_clean_rings(struct greth_private *greth)
+{
+	int i;
+	struct greth_bd *rx_bdp = greth->rx_bd_base;
+	struct greth_bd *tx_bdp = greth->tx_bd_base;
+
+	if (greth->gbit_mac) {
+
+		/* Free and unmap RX buffers */
+		for (i = 0; i < GRETH_RXBD_NUM; i++, rx_bdp++) {
+			if (greth->rx_skbuff[i] != NULL) {
+				dev_kfree_skb(greth->rx_skbuff[i]);
+				dma_unmap_single(greth->dev,
+						 greth_read_bd(&rx_bdp->addr),
+						 MAX_FRAME_SIZE+NET_IP_ALIGN,
+						 DMA_FROM_DEVICE);
+			}
+		}
+
+		/* TX buffers */
+		while (greth->tx_free < GRETH_TXBD_NUM) {
+
+			struct sk_buff *skb = greth->tx_skbuff[greth->tx_last];
+			int nr_frags = skb_shinfo(skb)->nr_frags;
+			tx_bdp = greth->tx_bd_base + greth->tx_last;
+			greth->tx_last = NEXT_TX(greth->tx_last);
+
+			dma_unmap_single(greth->dev,
+					 greth_read_bd(&tx_bdp->addr),
+					 skb_headlen(skb),
+					 DMA_TO_DEVICE);
+
+			for (i = 0; i < nr_frags; i++) {
+				skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+				tx_bdp = greth->tx_bd_base + greth->tx_last;
+
+				dma_unmap_page(greth->dev,
+					       greth_read_bd(&tx_bdp->addr),
+					       frag->size,
+					       DMA_TO_DEVICE);
+
+				greth->tx_last = NEXT_TX(greth->tx_last);
+			}
+			greth->tx_free += nr_frags+1;
+			dev_kfree_skb(skb);
+		}
+
+
+	} else { /* 10/100 Mbps MAC */
+
+		for (i = 0; i < GRETH_RXBD_NUM; i++, rx_bdp++) {
+			kfree(greth->rx_bufs[i]);
+			dma_unmap_single(greth->dev,
+					 greth_read_bd(&rx_bdp->addr),
+					 MAX_FRAME_SIZE,
+					 DMA_FROM_DEVICE);
+		}
+		for (i = 0; i < GRETH_TXBD_NUM; i++, tx_bdp++) {
+			kfree(greth->tx_bufs[i]);
+			dma_unmap_single(greth->dev,
+					 greth_read_bd(&tx_bdp->addr),
+					 MAX_FRAME_SIZE,
+					 DMA_TO_DEVICE);
+		}
+	}
+}
+
+static int greth_init_rings(struct greth_private *greth)
+{
+	struct sk_buff *skb;
+	struct greth_bd *rx_bd, *tx_bd;
+	u32 dma_addr;
+	int i;
+
+	rx_bd = greth->rx_bd_base;
+	tx_bd = greth->tx_bd_base;
+
+	/* Initialize descriptor rings and buffers */
+	if (greth->gbit_mac) {
+
+		for (i = 0; i < GRETH_RXBD_NUM; i++) {
+			skb = netdev_alloc_skb(greth->netdev, MAX_FRAME_SIZE+NET_IP_ALIGN);
+			if (skb == NULL) {
+				if (netif_msg_ifup(greth))
+					dev_err(greth->dev, "Error allocating DMA ring.\n");
+				goto cleanup;
+			}
+			skb_reserve(skb, NET_IP_ALIGN);
+			dma_addr = dma_map_single(greth->dev,
+						  skb->data,
+						  MAX_FRAME_SIZE+NET_IP_ALIGN,
+						  DMA_FROM_DEVICE);
+
+			if (dma_mapping_error(greth->dev, dma_addr)) {
+				if (netif_msg_ifup(greth))
+					dev_err(greth->dev, "Could not create initial DMA mapping\n");
+				goto cleanup;
+			}
+			greth->rx_skbuff[i] = skb;
+			greth_write_bd(&rx_bd[i].addr, dma_addr);
+			greth_write_bd(&rx_bd[i].stat, GRETH_BD_EN | GRETH_BD_IE);
+		}
+
+	} else {
+
+		/* 10/100 MAC uses a fixed set of buffers and copy to/from SKBs */
+		for (i = 0; i < GRETH_RXBD_NUM; i++) {
+
+			greth->rx_bufs[i] = kmalloc(MAX_FRAME_SIZE, GFP_KERNEL);
+
+			if (greth->rx_bufs[i] == NULL) {
+				if (netif_msg_ifup(greth))
+					dev_err(greth->dev, "Error allocating DMA ring.\n");
+				goto cleanup;
+			}
+
+			dma_addr = dma_map_single(greth->dev,
+						  greth->rx_bufs[i],
+						  MAX_FRAME_SIZE,
+						  DMA_FROM_DEVICE);
+
+			if (dma_mapping_error(greth->dev, dma_addr)) {
+				if (netif_msg_ifup(greth))
+					dev_err(greth->dev, "Could not create initial DMA mapping\n");
+				goto cleanup;
+			}
+			greth_write_bd(&rx_bd[i].addr, dma_addr);
+			greth_write_bd(&rx_bd[i].stat, GRETH_BD_EN | GRETH_BD_IE);
+		}
+		for (i = 0; i < GRETH_TXBD_NUM; i++) {
+
+			greth->tx_bufs[i] = kmalloc(MAX_FRAME_SIZE, GFP_KERNEL);
+
+			if (greth->tx_bufs[i] == NULL) {
+				if (netif_msg_ifup(greth))
+					dev_err(greth->dev, "Error allocating DMA ring.\n");
+				goto cleanup;
+			}
+
+			dma_addr = dma_map_single(greth->dev,
+						  greth->tx_bufs[i],
+						  MAX_FRAME_SIZE,
+						  DMA_TO_DEVICE);
+
+			if (dma_mapping_error(greth->dev, dma_addr)) {
+				if (netif_msg_ifup(greth))
+					dev_err(greth->dev, "Could not create initial DMA mapping\n");
+				goto cleanup;
+			}
+			greth_write_bd(&tx_bd[i].addr, dma_addr);
+			greth_write_bd(&tx_bd[i].stat, 0);
+		}
+	}
+	greth_write_bd(&rx_bd[GRETH_RXBD_NUM - 1].stat,
+		       greth_read_bd(&rx_bd[GRETH_RXBD_NUM - 1].stat) | GRETH_BD_WR);
+
+	/* Initialize pointers. */
+	greth->rx_cur = 0;
+	greth->tx_next = 0;
+	greth->tx_last = 0;
+	greth->tx_free = GRETH_TXBD_NUM;
+
+	/* Initialize descriptor base address */
+	GRETH_REGSAVE(greth->regs->tx_desc_p, greth->tx_bd_base_phys);
+	GRETH_REGSAVE(greth->regs->rx_desc_p, greth->rx_bd_base_phys);
+
+	return 0;
+
+cleanup:
+	greth_clean_rings(greth);
+	return -ENOMEM;
+}
+
+static int greth_open(struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	int err;
+
+	err = greth_init_rings(greth);
+	if (err) {
+		if (netif_msg_ifup(greth))
+			dev_err(&dev->dev, "Could not allocate memory for DMA rings\n");
+		return err;
+	}
+
+	err = request_irq(greth->irq, greth_interrupt, 0, "eth", (void *) dev);
+	if (err) {
+		if (netif_msg_ifup(greth))
+			dev_err(&dev->dev, "Could not allocate interrupt %d\n", dev->irq);
+		greth_clean_rings(greth);
+		return err;
+	}
+
+	if (netif_msg_ifup(greth))
+		dev_dbg(&dev->dev, " starting queue\n");
+	netif_start_queue(dev);
+
+	napi_enable(&greth->napi);
+
+	greth_enable_irqs(greth);
+	greth_enable_tx(greth);
+	greth_enable_rx(greth);
+	return 0;
+
+}
+
+static int greth_close(struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+
+	napi_disable(&greth->napi);
+
+	greth_disable_tx(greth);
+
+	netif_stop_queue(dev);
+
+	free_irq(greth->irq, (void *) dev);
+
+	greth_clean_rings(greth);
+
+	return 0;
+}
+
+static int greth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	struct greth_bd *bdp;
+	int err = NETDEV_TX_OK;
+	u32 status, dma_addr;
+
+	bdp = greth->tx_bd_base + greth->tx_next;
+
+	if (unlikely(greth->tx_free <= 0)) {
+		netif_stop_queue(dev);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (netif_msg_pktdata(greth))
+		greth_print_tx_packet(skb);
+
+
+	if (unlikely(skb->len > MAX_FRAME_SIZE)) {
+		dev->stats.tx_errors++;
+		goto out;
+	}
+
+	dma_addr = greth_read_bd(&bdp->addr);
+
+	memcpy((unsigned char *) phys_to_virt(dma_addr), skb->data, skb->len);
+
+	dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE);
+
+	status = GRETH_BD_EN | (skb->len & GRETH_BD_LEN);
+
+	/* Wrap around descriptor ring */
+	if (greth->tx_next == GRETH_TXBD_NUM_MASK) {
+		status |= GRETH_BD_WR;
+	}
+
+	greth->tx_next = NEXT_TX(greth->tx_next);
+	greth->tx_free--;
+
+	/* No more descriptors */
+	if (unlikely(greth->tx_free == 0)) {
+
+		/* Free transmitted descriptors */
+		greth_clean_tx(dev);
+
+		/* If nothing was cleaned, stop queue & wait for irq */
+		if (unlikely(greth->tx_free == 0)) {
+			status |= GRETH_BD_IE;
+			netif_stop_queue(dev);
+		}
+	}
+
+	/* Write descriptor control word and enable transmission */
+	greth_write_bd(&bdp->stat, status);
+	greth_enable_tx(greth);
+
+out:
+	dev_kfree_skb(skb);
+	return err;
+}
+
+
+static int greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	struct greth_bd *bdp;
+	u32 status = 0, dma_addr;
+	int curr_tx, nr_frags, i, err = NETDEV_TX_OK;
+
+	nr_frags = skb_shinfo(skb)->nr_frags;
+
+	if (greth->tx_free < nr_frags + 1) {
+		netif_stop_queue(dev);
+		err = NETDEV_TX_BUSY;
+		goto out;
+	}
+
+	if (netif_msg_pktdata(greth))
+		greth_print_tx_packet(skb);
+
+	if (unlikely(skb->len > MAX_FRAME_SIZE)) {
+		dev->stats.tx_errors++;
+		goto out;
+	}
+
+	/* Save skb pointer. */
+	greth->tx_skbuff[greth->tx_next] = skb;
+
+	/* Linear buf */
+	if (nr_frags != 0)
+		status = GRETH_TXBD_MORE;
+
+	status |= GRETH_TXBD_CSALL;
+	status |= skb_headlen(skb) & GRETH_BD_LEN;
+	if (greth->tx_next == GRETH_TXBD_NUM_MASK)
+		status |= GRETH_BD_WR;
+
+
+	bdp = greth->tx_bd_base + greth->tx_next;
+	greth_write_bd(&bdp->stat, status);
+	dma_addr = dma_map_single(greth->dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
+
+	if (unlikely(dma_mapping_error(greth->dev, dma_addr)))
+		goto map_error;
+
+	greth_write_bd(&bdp->addr, dma_addr);
+
+	curr_tx = NEXT_TX(greth->tx_next);
+
+	/* Frags */
+	for (i = 0; i < nr_frags; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		greth->tx_skbuff[curr_tx] = NULL;
+		bdp = greth->tx_bd_base + curr_tx;
+
+		status = GRETH_TXBD_CSALL;
+		status |= frag->size & GRETH_BD_LEN;
+
+		/* Wrap around descriptor ring */
+		if (curr_tx == GRETH_TXBD_NUM_MASK)
+			status |= GRETH_BD_WR;
+
+		/* More fragments left */
+		if (i < nr_frags - 1)
+			status |= GRETH_TXBD_MORE;
+
+		/* ... last fragment, check if out of descriptors  */
+		else if (greth->tx_free - nr_frags - 1 < (MAX_SKB_FRAGS + 1)) {
+
+			/* Enable interrupts and stop queue */
+			status |= GRETH_BD_IE;
+			netif_stop_queue(dev);
+		}
+
+		greth_write_bd(&bdp->stat, status);
+
+		dma_addr = dma_map_page(greth->dev,
+					frag->page,
+					frag->page_offset,
+					frag->size,
+					DMA_TO_DEVICE);
+
+		if (unlikely(dma_mapping_error(greth->dev, dma_addr)))
+			goto frag_map_error;
+
+		greth_write_bd(&bdp->addr, dma_addr);
+
+		curr_tx = NEXT_TX(curr_tx);
+	}
+
+	wmb();
+
+	/* Enable the descriptors that we configured ...  */
+	for (i = 0; i < nr_frags + 1; i++) {
+		bdp = greth->tx_bd_base + greth->tx_next;
+		greth_write_bd(&bdp->stat, greth_read_bd(&bdp->stat) | GRETH_BD_EN);
+		greth->tx_next = NEXT_TX(greth->tx_next);
+		greth->tx_free--;
+	}
+
+	greth_enable_tx(greth);
+
+	return NETDEV_TX_OK;
+
+frag_map_error:
+	/* Unmap SKB mappings that succeeded */
+	for (i = 0; greth->tx_next + i != curr_tx; i++) {
+		bdp = greth->tx_bd_base + greth->tx_next + i;
+		dma_unmap_single(greth->dev,
+				 greth_read_bd(&bdp->addr),
+				 greth_read_bd(&bdp->stat) & GRETH_BD_LEN,
+				 DMA_TO_DEVICE);
+	}
+map_error:
+	if (net_ratelimit())
+		dev_warn(greth->dev, "Could not create TX DMA mapping\n");
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+
+out:
+	return err;
+}
+
+
+static irqreturn_t greth_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct greth_private *greth;
+	u32 status;
+	irqreturn_t retval = IRQ_NONE;
+
+	greth = netdev_priv(dev);
+
+	spin_lock(&greth->devlock);
+
+	/* Get the interrupt events that caused us to be here. */
+	status = GRETH_REGLOAD(greth->regs->status);
+
+	/* Handle rx and tx interrupts through poll */
+	if (status & (GRETH_INT_RX | GRETH_INT_TX)) {
+
+		/* Clear interrupt status */
+		GRETH_REGORIN(greth->regs->status,
+			      status & (GRETH_INT_RX | GRETH_INT_TX));
+
+		retval = IRQ_HANDLED;
+
+		/* Disable interrupts and schedule poll() */
+		greth_disable_irqs(greth);
+		napi_schedule(&greth->napi);
+	}
+
+	mmiowb();
+	spin_unlock(&greth->devlock);
+
+	return retval;
+}
+
+static void greth_clean_tx(struct net_device *dev)
+{
+	struct greth_private *greth;
+	struct greth_bd *bdp;
+	u32 stat;
+
+	greth = netdev_priv(dev);
+
+	while (1) {
+		bdp = greth->tx_bd_base + greth->tx_last;
+		stat = greth_read_bd(&bdp->stat);
+
+		if (unlikely(stat & GRETH_BD_EN))
+			break;
+
+		if (greth->tx_free == GRETH_TXBD_NUM)
+			break;
+
+		/* Check status for errors */
+		if (unlikely(stat & GRETH_TXBD_STATUS)) {
+			dev->stats.tx_errors++;
+			if (stat & GRETH_TXBD_ERR_AL)
+				dev->stats.tx_aborted_errors++;
+			if (stat & GRETH_TXBD_ERR_UE)
+				dev->stats.tx_fifo_errors++;
+		}
+		dev->stats.tx_packets++;
+		greth->tx_last = NEXT_TX(greth->tx_last);
+		greth->tx_free++;
+	}
+
+	if (greth->tx_free > 0) {
+		netif_wake_queue(dev);
+	}
+
+}
+
+static inline void greth_update_tx_stats(struct net_device *dev, u32 stat)
+{
+	/* Check status for errors */
+	if (unlikely(stat & GRETH_TXBD_STATUS)) {
+		dev->stats.tx_errors++;
+		if (stat & GRETH_TXBD_ERR_AL)
+			dev->stats.tx_aborted_errors++;
+		if (stat & GRETH_TXBD_ERR_UE)
+			dev->stats.tx_fifo_errors++;
+		if (stat & GRETH_TXBD_ERR_LC)
+			dev->stats.tx_aborted_errors++;
+	}
+	dev->stats.tx_packets++;
+}
+
+static void greth_clean_tx_gbit(struct net_device *dev)
+{
+	struct greth_private *greth;
+	struct greth_bd *bdp, *bdp_last_frag;
+	struct sk_buff *skb;
+	u32 stat;
+	int nr_frags, i;
+
+	greth = netdev_priv(dev);
+
+	while (greth->tx_free < GRETH_TXBD_NUM) {
+
+		skb = greth->tx_skbuff[greth->tx_last];
+
+		nr_frags = skb_shinfo(skb)->nr_frags;
+
+		/* We only clean fully completed SKBs */
+		bdp_last_frag = greth->tx_bd_base + SKIP_TX(greth->tx_last, nr_frags);
+		stat = bdp_last_frag->stat;
+
+		if (stat & GRETH_BD_EN)
+			break;
+
+		greth->tx_skbuff[greth->tx_last] = NULL;
+
+		greth_update_tx_stats(dev, stat);
+
+		bdp = greth->tx_bd_base + greth->tx_last;
+
+		greth->tx_last = NEXT_TX(greth->tx_last);
+
+		dma_unmap_single(greth->dev,
+				 greth_read_bd(&bdp->addr),
+				 skb_headlen(skb),
+				 DMA_TO_DEVICE);
+
+		for (i = 0; i < nr_frags; i++) {
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			bdp = greth->tx_bd_base + greth->tx_last;
+
+			dma_unmap_page(greth->dev,
+				       greth_read_bd(&bdp->addr),
+				       frag->size,
+				       DMA_TO_DEVICE);
+
+			greth->tx_last = NEXT_TX(greth->tx_last);
+		}
+		greth->tx_free += nr_frags+1;
+		dev_kfree_skb(skb);
+	}
+	if (greth->tx_free > (MAX_SKB_FRAGS + 1)) {
+		netif_wake_queue(dev);
+	}
+}
+
+static int greth_pending_packets(struct greth_private *greth)
+{
+	struct greth_bd *bdp;
+	u32 status;
+	bdp = greth->rx_bd_base + greth->rx_cur;
+	status = greth_read_bd(&bdp->stat);
+	if (status & GRETH_BD_EN)
+		return 0;
+	else
+		return 1;
+}
+
+static int greth_rx(struct net_device *dev, int limit)
+{
+	struct greth_private *greth;
+	struct greth_bd *bdp;
+	struct sk_buff *skb;
+	int pkt_len;
+	int bad, count;
+	u32 status, dma_addr;
+
+	greth = netdev_priv(dev);
+
+	for (count = 0; count < limit; ++count) {
+
+		bdp = greth->rx_bd_base + greth->rx_cur;
+		status = greth_read_bd(&bdp->stat);
+		dma_addr = greth_read_bd(&bdp->addr);
+		bad = 0;
+
+		if (unlikely(status & GRETH_BD_EN)) {
+			break;
+		}
+
+		/* Check status for errors. */
+		if (unlikely(status & GRETH_RXBD_STATUS)) {
+			if (status & GRETH_RXBD_ERR_FT) {
+				dev->stats.rx_length_errors++;
+				bad = 1;
+			}
+			if (status & (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE)) {
+				dev->stats.rx_frame_errors++;
+				bad = 1;
+			}
+			if (status & GRETH_RXBD_ERR_CRC) {
+				dev->stats.rx_crc_errors++;
+				bad = 1;
+			}
+		}
+		if (unlikely(bad)) {
+			dev->stats.rx_errors++;
+
+		} else {
+
+			pkt_len = status & GRETH_BD_LEN;
+
+			skb = netdev_alloc_skb(dev, pkt_len + NET_IP_ALIGN);
+
+			if (unlikely(skb == NULL)) {
+
+				if (net_ratelimit())
+					dev_warn(&dev->dev, "low on memory - " "packet dropped\n");
+
+				dev->stats.rx_dropped++;
+
+			} else {
+				skb_reserve(skb, NET_IP_ALIGN);
+				skb->dev = dev;
+
+				dma_sync_single_for_cpu(greth->dev,
+							dma_addr,
+							pkt_len,
+							DMA_FROM_DEVICE);
+
+				if (netif_msg_pktdata(greth))
+					greth_print_rx_packet(phys_to_virt(dma_addr), pkt_len);
+
+				memcpy(skb_put(skb, pkt_len), phys_to_virt(dma_addr), pkt_len);
+
+				skb->protocol = eth_type_trans(skb, dev);
+				dev->stats.rx_packets++;
+				netif_receive_skb(skb);
+			}
+		}
+
+		status = GRETH_BD_EN | GRETH_BD_IE;
+		if (greth->rx_cur == GRETH_RXBD_NUM_MASK) {
+			status |= GRETH_BD_WR;
+		}
+
+		wmb();
+		greth_write_bd(&bdp->stat, status);
+
+		dma_sync_single_for_device(greth->dev, dma_addr, MAX_FRAME_SIZE, DMA_FROM_DEVICE);
+
+		greth_enable_rx(greth);
+
+		greth->rx_cur = NEXT_RX(greth->rx_cur);
+	}
+
+	return count;
+}
+
+static inline int hw_checksummed(u32 status)
+{
+
+	if (status & GRETH_RXBD_IP_FRAG)
+		return 0;
+
+	if (status & GRETH_RXBD_IP && status & GRETH_RXBD_IP_CSERR)
+		return 0;
+
+	if (status & GRETH_RXBD_UDP && status & GRETH_RXBD_UDP_CSERR)
+		return 0;
+
+	if (status & GRETH_RXBD_TCP && status & GRETH_RXBD_TCP_CSERR)
+		return 0;
+
+	return 1;
+}
+
+static int greth_rx_gbit(struct net_device *dev, int limit)
+{
+	struct greth_private *greth;
+	struct greth_bd *bdp;
+	struct sk_buff *skb, *newskb;
+	int pkt_len;
+	int bad, count = 0;
+	u32 status, dma_addr;
+
+	greth = netdev_priv(dev);
+
+	for (count = 0; count < limit; ++count) {
+
+		bdp = greth->rx_bd_base + greth->rx_cur;
+		skb = greth->rx_skbuff[greth->rx_cur];
+		status = greth_read_bd(&bdp->stat);
+		bad = 0;
+
+		if (status & GRETH_BD_EN)
+			break;
+
+		/* Check status for errors. */
+		if (unlikely(status & GRETH_RXBD_STATUS)) {
+
+			if (status & GRETH_RXBD_ERR_FT) {
+				dev->stats.rx_length_errors++;
+				bad = 1;
+			} else if (status &
+				   (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE | GRETH_RXBD_ERR_LE)) {
+				dev->stats.rx_frame_errors++;
+				bad = 1;
+			} else if (status & GRETH_RXBD_ERR_CRC) {
+				dev->stats.rx_crc_errors++;
+				bad = 1;
+			}
+		}
+
+		/* Allocate new skb to replace current */
+		newskb = netdev_alloc_skb(dev, MAX_FRAME_SIZE + NET_IP_ALIGN);
+
+		if (!bad && newskb) {
+			skb_reserve(newskb, NET_IP_ALIGN);
+
+			dma_addr = dma_map_single(greth->dev,
+						      newskb->data,
+						      MAX_FRAME_SIZE + NET_IP_ALIGN,
+						      DMA_FROM_DEVICE);
+
+			if (!dma_mapping_error(greth->dev, dma_addr)) {
+				/* Process the incoming frame. */
+				pkt_len = status & GRETH_BD_LEN;
+
+				dma_unmap_single(greth->dev,
+						 greth_read_bd(&bdp->addr),
+						 MAX_FRAME_SIZE + NET_IP_ALIGN,
+						 DMA_FROM_DEVICE);
+
+				if (netif_msg_pktdata(greth))
+					greth_print_rx_packet(phys_to_virt(greth_read_bd(&bdp->addr)), pkt_len);
+
+				skb_put(skb, pkt_len);
+
+				if (greth->flags & GRETH_FLAG_RX_CSUM && hw_checksummed(status))
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				else
+					skb->ip_summed = CHECKSUM_NONE;
+
+				skb->dev = dev;
+				skb->protocol = eth_type_trans(skb, dev);
+				dev->stats.rx_packets++;
+				netif_receive_skb(skb);
+
+				greth->rx_skbuff[greth->rx_cur] = newskb;
+				greth_write_bd(&bdp->addr, dma_addr);
+			} else {
+				if (net_ratelimit())
+					dev_warn(greth->dev, "Could not create DMA mapping, dropping packet\n");
+				dev_kfree_skb(newskb);
+				dev->stats.rx_dropped++;
+			}
+		} else {
+			if (net_ratelimit())
+				dev_warn(greth->dev, "Could not allocate SKB, dropping packet\n");
+			dev->stats.rx_dropped++;
+		}
+
+		status = GRETH_BD_EN | GRETH_BD_IE;
+		if (greth->rx_cur == GRETH_RXBD_NUM_MASK) {
+			status |= GRETH_BD_WR;
+		}
+
+		wmb();
+		greth_write_bd(&bdp->stat, status);
+		greth_enable_rx(greth);
+		greth->rx_cur = NEXT_RX(greth->rx_cur);
+	}
+
+	return count;
+
+}
+
+static int greth_poll(struct napi_struct *napi, int budget)
+{
+	struct greth_private *greth;
+	int work_done = 0;
+	greth = container_of(napi, struct greth_private, napi);
+
+	if (greth->gbit_mac) {
+		greth_clean_tx_gbit(greth->netdev);
+	} else {
+		greth_clean_tx(greth->netdev);
+	}
+
+restart_poll:
+	if (greth->gbit_mac) {
+		work_done += greth_rx_gbit(greth->netdev, budget - work_done);
+	} else {
+		work_done += greth_rx(greth->netdev, budget - work_done);
+	}
+
+	if (work_done < budget) {
+
+		napi_complete(napi);
+
+		if (greth_pending_packets(greth)) {
+			napi_reschedule(napi);
+			goto restart_poll;
+		}
+	}
+
+	greth_enable_irqs(greth);
+	return work_done;
+}
+
+static int greth_set_mac_add(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+	struct greth_private *greth;
+	struct greth_regs *regs;
+
+	greth = (struct greth_private *) netdev_priv(dev);
+	regs = (struct greth_regs *) greth->regs;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]);
+	GRETH_REGSAVE(regs->esa_lsb,
+		      addr->sa_data[2] << 24 | addr->
+		      sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]);
+	return 0;
+}
+
+static u32 greth_hash_get_index(__u8 *addr)
+{
+	return (ether_crc(6, addr)) & 0x3F;
+}
+
+static void greth_set_hash_filter(struct net_device *dev)
+{
+	struct dev_mc_list *curr;
+	struct greth_private *greth = (struct greth_private *) netdev_priv(dev);
+	struct greth_regs *regs = (struct greth_regs *) greth->regs;
+	u32 mc_filter[2];
+	unsigned int i, bitnr;
+
+	mc_filter[0] = mc_filter[1] = 0;
+
+	curr = dev->mc_list;
+
+	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
+
+		if (!curr)
+			break;	/* unexpected end of list */
+
+		bitnr = greth_hash_get_index(curr->dmi_addr);
+		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
+	}
+
+	GRETH_REGSAVE(regs->hash_msb, mc_filter[1]);
+	GRETH_REGSAVE(regs->hash_lsb, mc_filter[0]);
+}
+
+static void greth_set_multicast_list(struct net_device *dev)
+{
+	int cfg;
+	struct greth_private *greth = netdev_priv(dev);
+	struct greth_regs *regs = (struct greth_regs *) greth->regs;
+
+	cfg = GRETH_REGLOAD(regs->control);
+	if (dev->flags & IFF_PROMISC)
+		cfg |= GRETH_CTRL_PR;
+	else
+		cfg &= ~GRETH_CTRL_PR;
+
+	if (greth->multicast) {
+		if (dev->flags & IFF_ALLMULTI) {
+			GRETH_REGSAVE(regs->hash_msb, -1);
+			GRETH_REGSAVE(regs->hash_lsb, -1);
+			cfg |= GRETH_CTRL_MCEN;
+			GRETH_REGSAVE(regs->control, cfg);
+			return;
+		}
+
+		if (dev->mc_count == 0) {
+			cfg &= ~GRETH_CTRL_MCEN;
+			GRETH_REGSAVE(regs->control, cfg);
+			return;
+		}
+
+		/* Setup multicast filter */
+		greth_set_hash_filter(dev);
+		cfg |= GRETH_CTRL_MCEN;
+	}
+	GRETH_REGSAVE(regs->control, cfg);
+}
+
+static u32 greth_get_msglevel(struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	return greth->msg_enable;
+}
+
+static void greth_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	greth->msg_enable = value;
+}
+static int greth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	struct phy_device *phy = greth->phy;
+
+	if (!phy)
+		return -ENODEV;
+
+	return phy_ethtool_gset(phy, cmd);
+}
+
+static int greth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	struct phy_device *phy = greth->phy;
+
+	if (!phy)
+		return -ENODEV;
+
+	return phy_ethtool_sset(phy, cmd);
+}
+
+static int greth_get_regs_len(struct net_device *dev)
+{
+	return sizeof(struct greth_regs);
+}
+
+static void greth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct greth_private *greth = netdev_priv(dev);
+
+	strncpy(info->driver, dev_driver_string(greth->dev), 32);
+	strncpy(info->version, "revision: 1.0", 32);
+	strncpy(info->bus_info, greth->dev->bus->name, 32);
+	strncpy(info->fw_version, "N/A", 32);
+	info->eedump_len = 0;
+	info->regdump_len = sizeof(struct greth_regs);
+}
+
+static void greth_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
+{
+	int i;
+	struct greth_private *greth = netdev_priv(dev);
+	u32 __iomem *greth_regs = (u32 __iomem *) greth->regs;
+	u32 *buff = p;
+
+	for (i = 0; i < sizeof(struct greth_regs) / sizeof(u32); i++)
+		buff[i] = greth_read_bd(&greth_regs[i]);
+}
+
+static u32 greth_get_rx_csum(struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	return (greth->flags & GRETH_FLAG_RX_CSUM) != 0;
+}
+
+static int greth_set_rx_csum(struct net_device *dev, u32 data)
+{
+	struct greth_private *greth = netdev_priv(dev);
+
+	spin_lock_bh(&greth->devlock);
+
+	if (data)
+		greth->flags |= GRETH_FLAG_RX_CSUM;
+	else
+		greth->flags &= ~GRETH_FLAG_RX_CSUM;
+
+	spin_unlock_bh(&greth->devlock);
+
+	return 0;
+}
+
+static u32 greth_get_tx_csum(struct net_device *dev)
+{
+	return (dev->features & NETIF_F_IP_CSUM) != 0;
+}
+
+static int greth_set_tx_csum(struct net_device *dev, u32 data)
+{
+	netif_tx_lock_bh(dev);
+	ethtool_op_set_tx_csum(dev, data);
+	netif_tx_unlock_bh(dev);
+	return 0;
+}
+
+static const struct ethtool_ops greth_ethtool_ops = {
+	.get_msglevel		= greth_get_msglevel,
+	.set_msglevel		= greth_set_msglevel,
+	.get_settings		= greth_get_settings,
+	.set_settings		= greth_set_settings,
+	.get_drvinfo		= greth_get_drvinfo,
+	.get_regs_len           = greth_get_regs_len,
+	.get_regs               = greth_get_regs,
+	.get_rx_csum		= greth_get_rx_csum,
+	.set_rx_csum		= greth_set_rx_csum,
+	.get_tx_csum		= greth_get_tx_csum,
+	.set_tx_csum		= greth_set_tx_csum,
+	.get_link		= ethtool_op_get_link,
+};
+
+static struct net_device_ops greth_netdev_ops = {
+	.ndo_open = greth_open,
+	.ndo_stop = greth_close,
+	.ndo_start_xmit = greth_start_xmit,
+	.ndo_set_mac_address = greth_set_mac_add,
+};
+
+static inline int wait_for_mdio(struct greth_private *greth)
+{
+	unsigned long timeout = jiffies + 4*HZ/100;
+	while (GRETH_REGLOAD(greth->regs->mdio) & GRETH_MII_BUSY) {
+		if (time_after(jiffies, timeout))
+			return 0;
+	}
+	return 1;
+}
+
+static int greth_mdio_read(struct mii_bus *bus, int phy, int reg)
+{
+	struct greth_private *greth = bus->priv;
+	int data;
+
+	if (!wait_for_mdio(greth))
+		return -EBUSY;
+
+	GRETH_REGSAVE(greth->regs->mdio, ((phy & 0x1F) << 11) | ((reg & 0x1F) << 6) | 2);
+
+	if (!wait_for_mdio(greth))
+		return -EBUSY;
+
+	if (!(GRETH_REGLOAD(greth->regs->mdio) & GRETH_MII_NVALID)) {
+		data = (GRETH_REGLOAD(greth->regs->mdio) >> 16) & 0xFFFF;
+		return data;
+
+	} else {
+		return -1;
+	}
+}
+
+static int greth_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+	struct greth_private *greth = bus->priv;
+
+	if (!wait_for_mdio(greth))
+		return -EBUSY;
+
+	GRETH_REGSAVE(greth->regs->mdio,
+		      ((val & 0xFFFF) << 16) | ((phy & 0x1F) << 11) | ((reg & 0x1F) << 6) | 1);
+
+	if (!wait_for_mdio(greth))
+		return -EBUSY;
+
+	return 0;
+}
+
+static int greth_mdio_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static void greth_link_change(struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	struct phy_device *phydev = greth->phy;
+	unsigned long flags;
+
+	int status_change = 0;
+
+	spin_lock_irqsave(&greth->devlock, flags);
+
+	if (phydev->link) {
+
+		if ((greth->speed != phydev->speed) || (greth->duplex != phydev->duplex)) {
+
+			GRETH_REGANDIN(greth->regs->control,
+				       ~(GRETH_CTRL_FD | GRETH_CTRL_SP | GRETH_CTRL_GB));
+
+			if (phydev->duplex)
+				GRETH_REGORIN(greth->regs->control, GRETH_CTRL_FD);
+
+			if (phydev->speed == SPEED_100) {
+
+				GRETH_REGORIN(greth->regs->control, GRETH_CTRL_SP);
+			}
+
+			else if (phydev->speed == SPEED_1000)
+				GRETH_REGORIN(greth->regs->control, GRETH_CTRL_GB);
+
+			greth->speed = phydev->speed;
+			greth->duplex = phydev->duplex;
+			status_change = 1;
+		}
+	}
+
+	if (phydev->link != greth->link) {
+		if (!phydev->link) {
+			greth->speed = 0;
+			greth->duplex = -1;
+		}
+		greth->link = phydev->link;
+
+		status_change = 1;
+	}
+
+	spin_unlock_irqrestore(&greth->devlock, flags);
+
+	if (status_change) {
+		if (phydev->link)
+			pr_debug("%s: link up (%d/%s)\n",
+				dev->name, phydev->speed,
+				DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+		else
+			pr_debug("%s: link down\n", dev->name);
+	}
+}
+
+static int greth_mdio_probe(struct net_device *dev)
+{
+	struct greth_private *greth = netdev_priv(dev);
+	struct phy_device *phy = NULL;
+	u32 interface;
+	int i;
+
+	/* Find the first PHY */
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		if (greth->mdio->phy_map[i]) {
+			phy = greth->mdio->phy_map[i];
+			break;
+		}
+	}
+	if (!phy) {
+		if (netif_msg_probe(greth))
+			dev_err(&dev->dev, "no PHY found\n");
+		return -ENXIO;
+	}
+
+	if (greth->gbit_mac)
+		interface = PHY_INTERFACE_MODE_GMII;
+	else
+		interface = PHY_INTERFACE_MODE_MII;
+
+	phy = phy_connect(dev, dev_name(&phy->dev), &greth_link_change, 0, interface);
+
+	if (greth->gbit_mac)
+		phy->supported &= PHY_GBIT_FEATURES;
+	else
+		phy->supported &= PHY_BASIC_FEATURES;
+
+	phy->advertising = phy->supported;
+
+	if (IS_ERR(phy)) {
+		if (netif_msg_ifup(greth))
+			dev_err(&dev->dev, "could not attach to PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	greth->link = 0;
+	greth->speed = 0;
+	greth->duplex = -1;
+	greth->phy = phy;
+
+	return 0;
+}
+
+static inline int phy_aneg_done(struct phy_device *phydev)
+{
+	int retval;
+
+	retval = phy_read(phydev, MII_BMSR);
+
+	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+}
+
+static int greth_mdio_init(struct greth_private *greth)
+{
+	int ret, phy;
+	unsigned long timeout;
+
+	greth->mdio = mdiobus_alloc();
+	if (!greth->mdio) {
+		return -ENOMEM;
+	}
+
+	greth->mdio->name = "greth-mdio";
+	snprintf(greth->mdio->id, MII_BUS_ID_SIZE, "%s-%d", greth->mdio->name, greth->irq);
+	greth->mdio->read = greth_mdio_read;
+	greth->mdio->write = greth_mdio_write;
+	greth->mdio->reset = greth_mdio_reset;
+	greth->mdio->priv = greth;
+
+	greth->mdio->irq = greth->mdio_irqs;
+
+	for (phy = 0; phy < PHY_MAX_ADDR; phy++)
+		greth->mdio->irq[phy] = PHY_POLL;
+
+	ret = mdiobus_register(greth->mdio);
+	if (ret) {
+		goto error;
+	}
+
+	ret = greth_mdio_probe(greth->netdev);
+	if (ret) {
+		if (netif_msg_probe(greth))
+			dev_err(&greth->netdev->dev, "failed to probe MDIO bus\n");
+		goto unreg_mdio;
+	}
+
+	phy_start(greth->phy);
+
+	/* If Ethernet debug link is used make autoneg happen right away */
+	if (greth->edcl && greth_edcl == 1) {
+		phy_start_aneg(greth->phy);
+		timeout = jiffies + 6*HZ;
+		while (!phy_aneg_done(greth->phy) && time_before(jiffies, timeout)) {
+		}
+		genphy_read_status(greth->phy);
+		greth_link_change(greth->netdev);
+	}
+
+	return 0;
+
+unreg_mdio:
+	mdiobus_unregister(greth->mdio);
+error:
+	mdiobus_free(greth->mdio);
+	return ret;
+}
+
+/* Initialize the GRETH MAC */
+static int __devinit greth_of_probe(struct of_device *ofdev, const struct of_device_id *match)
+{
+	struct net_device *dev;
+	struct greth_private *greth;
+	struct greth_regs *regs;
+
+	int i;
+	int err;
+	int tmp;
+	unsigned long timeout;
+
+	dev = alloc_etherdev(sizeof(struct greth_private));
+
+	if (dev == NULL)
+		return -ENOMEM;
+
+	greth = netdev_priv(dev);
+	greth->netdev = dev;
+	greth->dev = &ofdev->dev;
+
+	if (greth_debug > 0)
+		greth->msg_enable = greth_debug;
+	else
+		greth->msg_enable = GRETH_DEF_MSG_ENABLE;
+
+	spin_lock_init(&greth->devlock);
+
+	greth->regs = of_ioremap(&ofdev->resource[0], 0,
+				 resource_size(&ofdev->resource[0]),
+				 "grlib-greth regs");
+
+	if (greth->regs == NULL) {
+		if (netif_msg_probe(greth))
+			dev_err(greth->dev, "ioremap failure.\n");
+		err = -EIO;
+		goto error1;
+	}
+
+	regs = (struct greth_regs *) greth->regs;
+	greth->irq = ofdev->irqs[0];
+
+	dev_set_drvdata(greth->dev, dev);
+	SET_NETDEV_DEV(dev, greth->dev);
+
+	if (netif_msg_probe(greth))
+		dev_dbg(greth->dev, "reseting controller.\n");
+
+	/* Reset the controller. */
+	GRETH_REGSAVE(regs->control, GRETH_RESET);
+
+	/* Wait for MAC to reset itself */
+	timeout = jiffies + HZ/100;
+	while (GRETH_REGLOAD(regs->control) & GRETH_RESET) {
+		if (time_after(jiffies, timeout)) {
+			err = -EIO;
+			if (netif_msg_probe(greth))
+				dev_err(greth->dev, "timeout when waiting for reset.\n");
+			goto error2;
+		}
+	}
+
+	/* Get default PHY address  */
+	greth->phyaddr = (GRETH_REGLOAD(regs->mdio) >> 11) & 0x1F;
+
+	/* Check if we have GBIT capable MAC */
+	tmp = GRETH_REGLOAD(regs->control);
+	greth->gbit_mac = (tmp >> 27) & 1;
+
+	/* Check for multicast capability */
+	greth->multicast = (tmp >> 25) & 1;
+
+	greth->edcl = (tmp >> 31) & 1;
+
+	/* If we have EDCL we disable the EDCL speed-duplex FSM so
+	 * it doesn't interfere with the software */
+	if (greth->edcl != 0)
+		GRETH_REGORIN(regs->control, GRETH_CTRL_DISDUPLEX);
+
+	/* Check if MAC can handle MDIO interrupts */
+	greth->mdio_int_en = (tmp >> 26) & 1;
+
+	err = greth_mdio_init(greth);
+	if (err) {
+		if (netif_msg_probe(greth))
+			dev_err(greth->dev, "failed to register MDIO bus\n");
+		goto error2;
+	}
+
+	/* Allocate TX descriptor ring in coherent memory */
+	greth->tx_bd_base = (struct greth_bd *) dma_alloc_coherent(greth->dev,
+								   1024,
+								   &greth->tx_bd_base_phys,
+								   GFP_KERNEL);
+
+	if (!greth->tx_bd_base) {
+		if (netif_msg_probe(greth))
+			dev_err(&dev->dev, "could not allocate descriptor memory.\n");
+		err = -ENOMEM;
+		goto error3;
+	}
+
+	memset(greth->tx_bd_base, 0, 1024);
+
+	/* Allocate RX descriptor ring in coherent memory */
+	greth->rx_bd_base = (struct greth_bd *) dma_alloc_coherent(greth->dev,
+								   1024,
+								   &greth->rx_bd_base_phys,
+								   GFP_KERNEL);
+
+	if (!greth->rx_bd_base) {
+		if (netif_msg_probe(greth))
+			dev_err(greth->dev, "could not allocate descriptor memory.\n");
+		err = -ENOMEM;
+		goto error4;
+	}
+
+	memset(greth->rx_bd_base, 0, 1024);
+
+	/* Get MAC address from: module param, OF property or ID prom */
+	for (i = 0; i < 6; i++) {
+		if (macaddr[i] != 0)
+			break;
+	}
+	if (i == 6) {
+		const unsigned char *addr;
+		int len;
+		addr = of_get_property(ofdev->node, "local-mac-address", &len);
+		if (addr != NULL && len == 6) {
+			for (i = 0; i < 6; i++)
+				macaddr[i] = (unsigned int) addr[i];
+		} else {
+#ifdef CONFIG_SPARC
+			for (i = 0; i < 6; i++)
+				macaddr[i] = (unsigned int) idprom->id_ethaddr[i];
+#endif
+		}
+	}
+
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = macaddr[i];
+
+	macaddr[5]++;
+
+	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+		if (netif_msg_probe(greth))
+			dev_err(greth->dev, "no valid ethernet address, aborting.\n");
+		err = -EINVAL;
+		goto error5;
+	}
+
+	GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
+	GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 |
+		      dev->dev_addr[4] << 8 | dev->dev_addr[5]);
+
+	/* Clear all pending interrupts except PHY irq */
+	GRETH_REGSAVE(regs->status, 0xFF);
+
+	if (greth->gbit_mac) {
+		dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_HIGHDMA;
+		greth_netdev_ops.ndo_start_xmit = greth_start_xmit_gbit;
+		greth->flags = GRETH_FLAG_RX_CSUM;
+	}
+
+	if (greth->multicast) {
+		greth_netdev_ops.ndo_set_multicast_list = greth_set_multicast_list;
+		dev->flags |= IFF_MULTICAST;
+	} else {
+		dev->flags &= ~IFF_MULTICAST;
+	}
+
+	dev->netdev_ops = &greth_netdev_ops;
+	dev->ethtool_ops = &greth_ethtool_ops;
+
+	if (register_netdev(dev)) {
+		if (netif_msg_probe(greth))
+			dev_err(greth->dev, "netdevice registration failed.\n");
+		err = -ENOMEM;
+		goto error5;
+	}
+
+	/* setup NAPI */
+	memset(&greth->napi, 0, sizeof(greth->napi));
+	netif_napi_add(dev, &greth->napi, greth_poll, 64);
+
+	return 0;
+
+error5:
+	dma_free_coherent(greth->dev, 1024, greth->rx_bd_base, greth->rx_bd_base_phys);
+error4:
+	dma_free_coherent(greth->dev, 1024, greth->tx_bd_base, greth->tx_bd_base_phys);
+error3:
+	mdiobus_unregister(greth->mdio);
+error2:
+	of_iounmap(&ofdev->resource[0], greth->regs, resource_size(&ofdev->resource[0]));
+error1:
+	free_netdev(dev);
+	return err;
+}
+
+static int __devexit greth_of_remove(struct of_device *of_dev)
+{
+	struct net_device *ndev = dev_get_drvdata(&of_dev->dev);
+	struct greth_private *greth = netdev_priv(ndev);
+
+	/* Free descriptor areas */
+	dma_free_coherent(&of_dev->dev, 1024, greth->rx_bd_base, greth->rx_bd_base_phys);
+
+	dma_free_coherent(&of_dev->dev, 1024, greth->tx_bd_base, greth->tx_bd_base_phys);
+
+	dev_set_drvdata(&of_dev->dev, NULL);
+
+	if (greth->phy)
+		phy_stop(greth->phy);
+	mdiobus_unregister(greth->mdio);
+
+	unregister_netdev(ndev);
+	free_netdev(ndev);
+
+	of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
+
+	return 0;
+}
+
+static struct of_device_id greth_of_match[] = {
+	{
+	 .name = "GAISLER_ETHMAC",
+	 },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, greth_of_match);
+
+static struct of_platform_driver greth_of_driver = {
+	.name = "grlib-greth",
+	.match_table = greth_of_match,
+	.probe = greth_of_probe,
+	.remove = __devexit_p(greth_of_remove),
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "grlib-greth",
+		   },
+};
+
+static int __init greth_init(void)
+{
+	return of_register_platform_driver(&greth_of_driver);
+}
+
+static void __exit greth_cleanup(void)
+{
+	of_unregister_platform_driver(&greth_of_driver);
+}
+
+module_init(greth_init);
+module_exit(greth_cleanup);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB.");
+MODULE_DESCRIPTION("Aeroflex Gaisler Ethernet MAC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
new file mode 100644
index 000000000000..973388d6abca
--- /dev/null
+++ b/drivers/net/greth.h
@@ -0,0 +1,143 @@
+#ifndef GRETH_H
+#define GRETH_H
+
+#include <linux/phy.h>
+
+/* Register bits and masks */
+#define GRETH_RESET 0x40
+#define GRETH_MII_BUSY 0x8
+#define GRETH_MII_NVALID 0x10
+
+#define GRETH_CTRL_FD         0x10
+#define GRETH_CTRL_PR         0x20
+#define GRETH_CTRL_SP         0x80
+#define GRETH_CTRL_GB         0x100
+#define GRETH_CTRL_PSTATIEN   0x400
+#define GRETH_CTRL_MCEN       0x800
+#define GRETH_CTRL_DISDUPLEX  0x1000
+#define GRETH_STATUS_PHYSTAT  0x100
+
+#define GRETH_BD_EN 0x800
+#define GRETH_BD_WR 0x1000
+#define GRETH_BD_IE 0x2000
+#define GRETH_BD_LEN 0x7FF
+
+#define GRETH_TXEN 0x1
+#define GRETH_INT_TX 0x8
+#define GRETH_TXI 0x4
+#define GRETH_TXBD_STATUS 0x0001C000
+#define GRETH_TXBD_MORE 0x20000
+#define GRETH_TXBD_IPCS 0x40000
+#define GRETH_TXBD_TCPCS 0x80000
+#define GRETH_TXBD_UDPCS 0x100000
+#define GRETH_TXBD_CSALL (GRETH_TXBD_IPCS | GRETH_TXBD_TCPCS | GRETH_TXBD_UDPCS)
+#define GRETH_TXBD_ERR_LC 0x10000
+#define GRETH_TXBD_ERR_UE 0x4000
+#define GRETH_TXBD_ERR_AL 0x8000
+
+#define GRETH_INT_RX         0x4
+#define GRETH_RXEN           0x2
+#define GRETH_RXI            0x8
+#define GRETH_RXBD_STATUS    0xFFFFC000
+#define GRETH_RXBD_ERR_AE    0x4000
+#define GRETH_RXBD_ERR_FT    0x8000
+#define GRETH_RXBD_ERR_CRC   0x10000
+#define GRETH_RXBD_ERR_OE    0x20000
+#define GRETH_RXBD_ERR_LE    0x40000
+#define GRETH_RXBD_IP        0x80000
+#define GRETH_RXBD_IP_CSERR  0x100000
+#define GRETH_RXBD_UDP       0x200000
+#define GRETH_RXBD_UDP_CSERR 0x400000
+#define GRETH_RXBD_TCP       0x800000
+#define GRETH_RXBD_TCP_CSERR 0x1000000
+#define GRETH_RXBD_IP_FRAG   0x2000000
+#define GRETH_RXBD_MCAST     0x4000000
+
+/* Descriptor parameters */
+#define GRETH_TXBD_NUM 128
+#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
+#define GRETH_TX_BUF_SIZE 2048
+#define GRETH_RXBD_NUM 128
+#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
+#define GRETH_RX_BUF_SIZE 2048
+
+/* Buffers per page */
+#define GRETH_RX_BUF_PPGAE	(PAGE_SIZE/GRETH_RX_BUF_SIZE)
+#define GRETH_TX_BUF_PPGAE	(PAGE_SIZE/GRETH_TX_BUF_SIZE)
+
+/* How many pages are needed for buffers */
+#define GRETH_RX_BUF_PAGE_NUM	(GRETH_RXBD_NUM/GRETH_RX_BUF_PPGAE)
+#define GRETH_TX_BUF_PAGE_NUM	(GRETH_TXBD_NUM/GRETH_TX_BUF_PPGAE)
+
+/* Buffer size.
+ * Gbit MAC uses tagged maximum frame size which is 1518 excluding CRC.
+ * Set to 1520 to make all buffers word aligned for non-gbit MAC.
+ */
+#define MAX_FRAME_SIZE		1520
+
+/* Flags */
+#define GRETH_FLAG_RX_CSUM 0x1
+
+/* GRETH APB registers */
+struct greth_regs {
+	u32 control;
+	u32 status;
+	u32 esa_msb;
+	u32 esa_lsb;
+	u32 mdio;
+	u32 tx_desc_p;
+	u32 rx_desc_p;
+	u32 edclip;
+	u32 hash_msb;
+	u32 hash_lsb;
+};
+
+/* GRETH buffer descriptor */
+struct greth_bd {
+	u32 stat;
+	u32 addr;
+};
+
+struct greth_private {
+	struct sk_buff *rx_skbuff[GRETH_RXBD_NUM];
+	struct sk_buff *tx_skbuff[GRETH_TXBD_NUM];
+
+	unsigned char *tx_bufs[GRETH_TXBD_NUM];
+	unsigned char *rx_bufs[GRETH_RXBD_NUM];
+
+	u16 tx_next;
+	u16 tx_last;
+	u16 tx_free;
+	u16 rx_cur;
+
+	struct greth_regs *regs;	/* Address of controller registers. */
+	struct greth_bd *rx_bd_base;	/* Address of Rx BDs. */
+	struct greth_bd *tx_bd_base;	/* Address of Tx BDs. */
+	dma_addr_t rx_bd_base_phys;
+	dma_addr_t tx_bd_base_phys;
+
+	int irq;
+
+	struct device *dev;	        /* Pointer to of_device->dev */
+	struct net_device *netdev;
+	struct napi_struct napi;
+	spinlock_t devlock;
+
+	struct phy_device *phy;
+	struct mii_bus *mdio;
+	int mdio_irqs[PHY_MAX_ADDR];
+	unsigned int link;
+	unsigned int speed;
+	unsigned int duplex;
+
+	u32 msg_enable;
+	u32 flags;
+
+	u8 phyaddr;
+	u8 multicast;
+	u8 gbit_mac;
+	u8 mdio_int_en;
+	u8 edcl;
+};
+
+#endif
-- 
cgit v1.2.3


From 1d4bd947c501ea1da81300280fb6aeec2cca9335 Mon Sep 17 00:00:00 2001
From: "kirjanov@gmail.com" <kirjanov@gmail.com>
Date: Tue, 16 Feb 2010 20:40:11 +0000
Subject: mv643xx_eth: fix missing validate_addr hook

Fix missing validate_addr hook.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mv643xx_eth.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index e24072a9a979..2733b0a3b703 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2846,6 +2846,7 @@ static const struct net_device_ops mv643xx_eth_netdev_ops = {
 	.ndo_start_xmit		= mv643xx_eth_xmit,
 	.ndo_set_rx_mode	= mv643xx_eth_set_rx_mode,
 	.ndo_set_mac_address	= mv643xx_eth_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= mv643xx_eth_ioctl,
 	.ndo_change_mtu		= mv643xx_eth_change_mtu,
 	.ndo_tx_timeout		= mv643xx_eth_tx_timeout,
-- 
cgit v1.2.3


From e4a474f82ddaaef65433b0b4f5169f2f6cd8ddb0 Mon Sep 17 00:00:00 2001
From: "kirjanov@gmail.com" <kirjanov@gmail.com>
Date: Tue, 16 Feb 2010 21:54:58 +0000
Subject: smsc911x: replace manual phy lookup.

Use phy_find_first() function instead of manual lookup.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smsc911x.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 3c1f9aa84cf5..13c0b76dec41 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -770,29 +770,25 @@ static int smsc911x_mii_probe(struct net_device *dev)
 {
 	struct smsc911x_data *pdata = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
-	int phy_addr;
+	int ret;
 
 	/* find the first phy */
-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-		if (pdata->mii_bus->phy_map[phy_addr]) {
-			phydev = pdata->mii_bus->phy_map[phy_addr];
-			SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X",
-				phy_addr, phydev->addr, phydev->phy_id);
-			break;
-		}
-	}
-
+	phydev = phy_find_first(pdata->mii_bus);
 	if (!phydev) {
 		pr_err("%s: no PHY found\n", dev->name);
 		return -ENODEV;
 	}
 
-	phydev = phy_connect(dev, dev_name(&phydev->dev),
-		&smsc911x_phy_adjust_link, 0, pdata->config.phy_interface);
+	SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X",
+			phy_addr, phydev->addr, phydev->phy_id);
+
+	ret = phy_connect_direct(dev, phydev,
+			&smsc911x_phy_adjust_link, 0,
+			pdata->config.phy_interface);
 
-	if (IS_ERR(phydev)) {
+	if (ret) {
 		pr_err("%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
+		return ret;
 	}
 
 	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-- 
cgit v1.2.3


From 0988d26978561d568efed45cc5576d85ea7b609d Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 12:27:14 +0000
Subject: cxgb3: convert to use netdev_for_each_addr

Removed whole t3_rx_mode structure and appropriate helpers cause they are no
longer needed.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/common.h     | 28 +---------------------------
 drivers/net/cxgb3/cxgb3_main.c |  8 ++------
 drivers/net/cxgb3/xgmac.c      | 15 ++++++++-------
 3 files changed, 11 insertions(+), 40 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 6ff356d4c7ab..fe08a004b0dd 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -67,32 +67,6 @@
 /* Additional NETIF_MSG_* categories */
 #define NETIF_MSG_MMIO 0x8000000
 
-struct t3_rx_mode {
-	struct net_device *dev;
-	struct dev_mc_list *mclist;
-	unsigned int idx;
-};
-
-static inline void init_rx_mode(struct t3_rx_mode *p, struct net_device *dev,
-				struct dev_mc_list *mclist)
-{
-	p->dev = dev;
-	p->mclist = mclist;
-	p->idx = 0;
-}
-
-static inline u8 *t3_get_next_mcaddr(struct t3_rx_mode *rm)
-{
-	u8 *addr = NULL;
-
-	if (rm->mclist && rm->idx < rm->dev->mc_count) {
-		addr = rm->mclist->dmi_addr;
-		rm->mclist = rm->mclist->next;
-		rm->idx++;
-	}
-	return addr;
-}
-
 enum {
 	MAX_NPORTS = 2,		/* max # of ports */
 	MAX_FRAME_SIZE = 10240,	/* max MAC frame size, including header + FCS */
@@ -746,7 +720,7 @@ void t3_mac_enable_exact_filters(struct cmac *mac);
 int t3_mac_enable(struct cmac *mac, int which);
 int t3_mac_disable(struct cmac *mac, int which);
 int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu);
-int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm);
+int t3_mac_set_rx_mode(struct cmac *mac, struct net_device *dev);
 int t3_mac_set_address(struct cmac *mac, unsigned int idx, u8 addr[6]);
 int t3_mac_set_num_ucast(struct cmac *mac, int n);
 const struct mac_stats *t3_mac_update_stats(struct cmac *mac);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 73622f5312cb..6fd968abb073 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -324,11 +324,9 @@ void t3_os_phymod_changed(struct adapter *adap, int port_id)
 
 static void cxgb_set_rxmode(struct net_device *dev)
 {
-	struct t3_rx_mode rm;
 	struct port_info *pi = netdev_priv(dev);
 
-	init_rx_mode(&rm, dev, dev->mc_list);
-	t3_mac_set_rx_mode(&pi->mac, &rm);
+	t3_mac_set_rx_mode(&pi->mac, dev);
 }
 
 /**
@@ -339,17 +337,15 @@ static void cxgb_set_rxmode(struct net_device *dev)
  */
 static void link_start(struct net_device *dev)
 {
-	struct t3_rx_mode rm;
 	struct port_info *pi = netdev_priv(dev);
 	struct cmac *mac = &pi->mac;
 
-	init_rx_mode(&rm, dev, dev->mc_list);
 	t3_mac_reset(mac);
 	t3_mac_set_num_ucast(mac, MAX_MAC_IDX);
 	t3_mac_set_mtu(mac, dev->mtu);
 	t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr);
 	t3_mac_set_address(mac, SAN_MAC_IDX, pi->iscsic.mac_addr);
-	t3_mac_set_rx_mode(mac, &rm);
+	t3_mac_set_rx_mode(mac, dev);
 	t3_link_start(&pi->phy, mac, &pi->link_config);
 	t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
 }
diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c
index 0c08de5d09fd..c142a2132e9f 100644
--- a/drivers/net/cxgb3/xgmac.c
+++ b/drivers/net/cxgb3/xgmac.c
@@ -297,29 +297,30 @@ static int hash_hw_addr(const u8 * addr)
 	return hash;
 }
 
-int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm)
+int t3_mac_set_rx_mode(struct cmac *mac, struct net_device *dev)
 {
 	u32 val, hash_lo, hash_hi;
 	struct adapter *adap = mac->adapter;
 	unsigned int oft = mac->offset;
 
 	val = t3_read_reg(adap, A_XGM_RX_CFG + oft) & ~F_COPYALLFRAMES;
-	if (rm->dev->flags & IFF_PROMISC)
+	if (dev->flags & IFF_PROMISC)
 		val |= F_COPYALLFRAMES;
 	t3_write_reg(adap, A_XGM_RX_CFG + oft, val);
 
-	if (rm->dev->flags & IFF_ALLMULTI)
+	if (dev->flags & IFF_ALLMULTI)
 		hash_lo = hash_hi = 0xffffffff;
 	else {
-		u8 *addr;
+		struct dev_mc_list *dmi;
 		int exact_addr_idx = mac->nucast;
 
 		hash_lo = hash_hi = 0;
-		while ((addr = t3_get_next_mcaddr(rm)))
+		netdev_for_each_mc_addr(dmi, dev)
 			if (exact_addr_idx < EXACT_ADDR_FILTERS)
-				set_addr_filter(mac, exact_addr_idx++, addr);
+				set_addr_filter(mac, exact_addr_idx++,
+						dmi->dmi_addr);
 			else {
-				int hash = hash_hw_addr(addr);
+				int hash = hash_hw_addr(dmi->dmi_addr);
 
 				if (hash < 32)
 					hash_lo |= (1 << hash);
-- 
cgit v1.2.3


From 305b0160932af0ed67259b4b13c471aed2a86588 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 11:56:45 +0000
Subject: chelsio: convert to use netdev_for_each_mc_addr

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/chelsio/common.h | 16 ++--------------
 drivers/net/chelsio/cxgb2.c  |  2 --
 drivers/net/chelsio/pm3393.c |  6 +++---
 3 files changed, 5 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index bb159d9603bf..9f89fd600643 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -90,25 +90,13 @@
 typedef struct adapter adapter_t;
 
 struct t1_rx_mode {
-	struct net_device *dev;
-	u32 idx;
-	struct dev_mc_list *list;
+       struct net_device *dev;
 };
 
 #define t1_rx_mode_promisc(rm)	(rm->dev->flags & IFF_PROMISC)
 #define t1_rx_mode_allmulti(rm)	(rm->dev->flags & IFF_ALLMULTI)
 #define t1_rx_mode_mc_cnt(rm)	(netdev_mc_count(rm->dev))
-
-static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
-{
-	u8 *addr = NULL;
-
-	if (rm->idx++ < t1_rx_mode_mc_cnt(rm)) {
-		addr = rm->list->dmi_addr;
-		rm->list = rm->list->next;
-	}
-	return addr;
-}
+#define t1_get_netdev(rm)	(rm->dev)
 
 #define	MAX_NPORTS 4
 #define PORT_MASK ((1 << MAX_NPORTS) - 1)
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index 082cdb28b510..a54a32b16498 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -125,8 +125,6 @@ static void t1_set_rxmode(struct net_device *dev)
 	struct t1_rx_mode rm;
 
 	rm.dev = dev;
-	rm.idx = 0;
-	rm.list = dev->mc_list;
 	mac->ops->set_rx_mode(mac, &rm);
 }
 
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
index 2117c4fbb107..33d674f36722 100644
--- a/drivers/net/chelsio/pm3393.c
+++ b/drivers/net/chelsio/pm3393.c
@@ -375,12 +375,12 @@ static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm)
 		rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN;
 	} else if (t1_rx_mode_mc_cnt(rm)) {
 		/* Accept one or more multicast(s). */
-		u8 *addr;
+		struct dev_mc_list *dmi;
 		int bit;
 		u16 mc_filter[4] = { 0, };
 
-		while ((addr = t1_get_next_mcaddr(rm))) {
-			bit = (ether_crc(ETH_ALEN, addr) >> 23) & 0x3f;	/* bit[23:28] */
+		netdev_for_each_mc_addr(dmi, t1_get_netdev(rm)) {
+			bit = (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 23) & 0x3f; /* bit[23:28] */
 			mc_filter[bit >> 4] |= 1 << (bit & 0xf);
 		}
 		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]);
-- 
cgit v1.2.3


From 99405162598176e830d17ae6d4f3d9e070ad900c Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Sun, 14 Feb 2010 01:01:10 +0000
Subject: tun: socket filter support

This patch adds Linux Socket Filter support to
tun driver.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c      | 26 ++++++++++++++++++++++++++
 include/linux/if_tun.h |  3 +++
 2 files changed, 29 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 5adb3d150552..ce1efa4c0b0d 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -61,6 +61,7 @@
 #include <linux/crc32.h>
 #include <linux/nsproxy.h>
 #include <linux/virtio_net.h>
+#include <linux/rcupdate.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
 #include <net/rtnetlink.h>
@@ -366,6 +367,10 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!check_filter(&tun->txflt, skb))
 		goto drop;
 
+	if (tun->socket.sk->sk_filter &&
+	    sk_filter(tun->socket.sk, skb))
+		goto drop;
+
 	if (skb_queue_len(&tun->socket.sk->sk_receive_queue) >= dev->tx_queue_len) {
 		if (!(tun->flags & TUN_ONE_QUEUE)) {
 			/* Normal queueing mode. */
@@ -1162,6 +1167,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun;
 	void __user* argp = (void __user*)arg;
+	struct sock_fprog fprog;
 	struct ifreq ifr;
 	int sndbuf;
 	int ret;
@@ -1309,6 +1315,26 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
 		tun->socket.sk->sk_sndbuf = sndbuf;
 		break;
 
+	case TUNATTACHFILTER:
+		/* Can be set only for TAPs */
+		ret = -EINVAL;
+		if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
+			break;
+		ret = -EFAULT;
+		if (copy_from_user(&fprog, argp, sizeof(fprog)))
+			break;
+
+		ret = sk_attach_filter(&fprog, tun->socket.sk);
+		break;
+
+	case TUNDETACHFILTER:
+		/* Can be set only for TAPs */
+		ret = -EINVAL;
+		if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
+			break;
+		ret = sk_detach_filter(tun->socket.sk);
+		break;
+
 	default:
 		ret = -EINVAL;
 		break;
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 404abe00162c..1350a246893a 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -18,6 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/if_ether.h>
+#include <linux/filter.h>
 
 /* Read queue size */
 #define TUN_READQ_SIZE	500
@@ -48,6 +49,8 @@
 #define TUNGETIFF      _IOR('T', 210, unsigned int)
 #define TUNGETSNDBUF   _IOR('T', 211, int)
 #define TUNSETSNDBUF   _IOW('T', 212, int)
+#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
+#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
-- 
cgit v1.2.3


From 61e800cf949926b3d463ca3cf3025d964872774b Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:16:54 +0000
Subject: tg3: Enforce DMA mapping / skb assignment ordering

Michael Chan noted that there is nothing in the code that would prevent
the compiler from delaying the access of the "mapping" member of the
newly arrived packet until much later.  If this happened after the
skb = NULL assignment, it is possible for the driver to pass a bad
dma_addr value to pci_unmap_single().  To enforce this ordering, we need
a write memory barrier.  The pairing read memory barrier already exists
in tg3_rx_prodring_xfer() under the comments starting with
"Ensure that updates to the...".

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 385434ff3960..344490e872b4 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4659,11 +4659,16 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 			if (skb_size < 0)
 				goto drop_it;
 
-			ri->skb = NULL;
-
 			pci_unmap_single(tp->pdev, dma_addr, skb_size,
 					 PCI_DMA_FROMDEVICE);
 
+			/* Ensure that the update to the skb happens
+			 * after the usage of the old DMA mapping.
+			 */
+			smp_wmb();
+
+			ri->skb = NULL;
+
 			skb_put(skb, len);
 		} else {
 			struct sk_buff *copy_skb;
-- 
cgit v1.2.3


From d110114281fad580dd9ce629507d17b123169cff Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:16:55 +0000
Subject: tg3: Make 57791 and 57795 10/100 only

This patch adds the 57791 and 57795 to the list of devices that only
support 10 and 100 Mbps speeds.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 344490e872b4..051b18ad3f0c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -13588,6 +13588,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	      tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F ||
 	      tp->pdev->device == PCI_DEVICE_ID_TIGON3_5787F)) ||
 	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790 ||
+	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_57791 ||
+	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_57795 ||
 	    (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
 		tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
 
-- 
cgit v1.2.3


From a4153d401ac440c73e0721db0b6b031e8e6f77d1 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:16:56 +0000
Subject: tg3: Add support for 2 new selfboot formats

This patch adds new offsets to the bootcode version extraction code to
support NVRAM format versions 4 and 5.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 6 ++++++
 drivers/net/tg3.h | 4 ++++
 2 files changed, 10 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 051b18ad3f0c..f08e4b846458 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12753,6 +12753,12 @@ static void __devinit tg3_read_sb_ver(struct tg3 *tp, u32 val)
 	case TG3_EEPROM_SB_REVISION_3:
 		offset = TG3_EEPROM_SB_F1R3_EDH_OFF;
 		break;
+	case TG3_EEPROM_SB_REVISION_4:
+		offset = TG3_EEPROM_SB_F1R4_EDH_OFF;
+		break;
+	case TG3_EEPROM_SB_REVISION_5:
+		offset = TG3_EEPROM_SB_F1R5_EDH_OFF;
+		break;
 	default:
 		return;
 	}
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index b4fd59623cfb..ffc12b1cb388 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1864,6 +1864,8 @@
 #define TG3_EEPROM_SB_REVISION_0	0x00000000
 #define TG3_EEPROM_SB_REVISION_2	0x00020000
 #define TG3_EEPROM_SB_REVISION_3	0x00030000
+#define TG3_EEPROM_SB_REVISION_4	0x00040000
+#define TG3_EEPROM_SB_REVISION_5	0x00050000
 #define TG3_EEPROM_MAGIC_HW		0xabcd
 #define TG3_EEPROM_MAGIC_HW_MSK		0xffff
 
@@ -1881,6 +1883,8 @@
 #define TG3_EEPROM_SB_F1R2_EDH_OFF	0x14
 #define TG3_EEPROM_SB_F1R2_MBA_OFF	0x10
 #define TG3_EEPROM_SB_F1R3_EDH_OFF	0x18
+#define TG3_EEPROM_SB_F1R4_EDH_OFF	0x1c
+#define TG3_EEPROM_SB_F1R5_EDH_OFF	0x20
 #define TG3_EEPROM_SB_EDH_MAJ_MASK	0x00000700
 #define TG3_EEPROM_SB_EDH_MAJ_SHFT	8
 #define TG3_EEPROM_SB_EDH_MIN_MASK	0x000000ff
-- 
cgit v1.2.3


From 2712168f856e8cd42265e7ef855d64702da20089 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:16:57 +0000
Subject: tg3: Allow phylib flowctrl changes anytime

This patch loosens the restriction that the phylib interface must be up
and running to change the flow control parameters.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 94 ++++++++++++++++++++++++++++++-------------------------
 1 file changed, 52 insertions(+), 42 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f08e4b846458..11ee44bfa2f3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10093,56 +10093,66 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 	int err = 0;
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
-		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
-			return -EAGAIN;
+		u32 newadv;
+		struct phy_device *phydev;
 
-		if (epause->autoneg) {
-			u32 newadv;
-			struct phy_device *phydev;
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
-			phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		if (!(phydev->supported & SUPPORTED_Pause) ||
+		    (!(phydev->supported & SUPPORTED_Asym_Pause) &&
+		     ((epause->rx_pause && !epause->tx_pause) ||
+		      (!epause->rx_pause && epause->tx_pause))))
+			return -EINVAL;
 
-			if (epause->rx_pause) {
-				if (epause->tx_pause)
-					newadv = ADVERTISED_Pause;
-				else
-					newadv = ADVERTISED_Pause |
-						 ADVERTISED_Asym_Pause;
-			} else if (epause->tx_pause) {
-				newadv = ADVERTISED_Asym_Pause;
+		tp->link_config.flowctrl = 0;
+		if (epause->rx_pause) {
+			tp->link_config.flowctrl |= FLOW_CTRL_RX;
+
+			if (epause->tx_pause) {
+				tp->link_config.flowctrl |= FLOW_CTRL_TX;
+				newadv = ADVERTISED_Pause;
 			} else
-				newadv = 0;
-
-			if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
-				u32 oldadv = phydev->advertising &
-					     (ADVERTISED_Pause |
-					      ADVERTISED_Asym_Pause);
-				if (oldadv != newadv) {
-					phydev->advertising &=
-						~(ADVERTISED_Pause |
-						  ADVERTISED_Asym_Pause);
-					phydev->advertising |= newadv;
-					err = phy_start_aneg(phydev);
+				newadv = ADVERTISED_Pause |
+					 ADVERTISED_Asym_Pause;
+		} else if (epause->tx_pause) {
+			tp->link_config.flowctrl |= FLOW_CTRL_TX;
+			newadv = ADVERTISED_Asym_Pause;
+		} else
+			newadv = 0;
+
+		if (epause->autoneg)
+			tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+		else
+			tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
+
+		if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
+			u32 oldadv = phydev->advertising &
+				     (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+			if (oldadv != newadv) {
+				phydev->advertising &=
+					~(ADVERTISED_Pause |
+					  ADVERTISED_Asym_Pause);
+				phydev->advertising |= newadv;
+				if (phydev->autoneg) {
+					/*
+					 * Always renegotiate the link to
+					 * inform our link partner of our
+					 * flow control settings, even if the
+					 * flow control is forced.  Let
+					 * tg3_adjust_link() do the final
+					 * flow control setup.
+					 */
+					return phy_start_aneg(phydev);
 				}
-			} else {
-				tp->link_config.advertising &=
-						~(ADVERTISED_Pause |
-						  ADVERTISED_Asym_Pause);
-				tp->link_config.advertising |= newadv;
 			}
-		} else {
-			if (epause->rx_pause)
-				tp->link_config.flowctrl |= FLOW_CTRL_RX;
-			else
-				tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
-
-			if (epause->tx_pause)
-				tp->link_config.flowctrl |= FLOW_CTRL_TX;
-			else
-				tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
 
-			if (netif_running(dev))
+			if (!epause->autoneg)
 				tg3_setup_flow_control(tp, 0, 0);
+		} else {
+			tp->link_config.orig_advertising &=
+					~(ADVERTISED_Pause |
+					  ADVERTISED_Asym_Pause);
+			tp->link_config.orig_advertising |= newadv;
 		}
 	} else {
 		int irq_sync = 0;
-- 
cgit v1.2.3


From b474eca74cf647df0a7fd56bc975ee4a812741b7 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:16:58 +0000
Subject: tg3: Add more partno entries for fallback path

This patch adds 57765 asic partno entries for the path executed if VPD
is not present in NVRAM.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 11ee44bfa2f3..c9974a7697c9 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12659,8 +12659,24 @@ out_not_found:
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
 		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57788)
 		strcpy(tp->board_part_number, "BCM57788");
-	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57761)
+		strcpy(tp->board_part_number, "BCM57761");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57765)
 		strcpy(tp->board_part_number, "BCM57765");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57781)
+		strcpy(tp->board_part_number, "BCM57781");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57785)
+		strcpy(tp->board_part_number, "BCM57785");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57791)
+		strcpy(tp->board_part_number, "BCM57791");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57795)
+		strcpy(tp->board_part_number, "BCM57795");
 	else
 		strcpy(tp->board_part_number, "none");
 }
-- 
cgit v1.2.3


From 144170635b543ceadfe6ba907ac496b40795764e Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:16:59 +0000
Subject: tg3: Rename TG3_FLG3_RGMII_STD_IBND_DISABLE

The STD part of this preprocessor definition is a bit of a misnomer.
This flag is a coarse control of the RGMII inband status facilities.
This patch renames the definition to be more accurate.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 12 ++++++------
 drivers/net/tg3.h |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c9974a7697c9..09e3af0d1743 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -984,7 +984,7 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 		return;
 	}
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE))
+	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE))
 		val |= MAC_PHYCFG2_EMODE_MASK_MASK |
 		       MAC_PHYCFG2_FMODE_MASK_MASK |
 		       MAC_PHYCFG2_GMODE_MASK_MASK |
@@ -997,7 +997,7 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 	val = tr32(MAC_PHYCFG1);
 	val &= ~(MAC_PHYCFG1_RXCLK_TO_MASK | MAC_PHYCFG1_TXCLK_TO_MASK |
 		 MAC_PHYCFG1_RGMII_EXT_RX_DEC | MAC_PHYCFG1_RGMII_SND_STAT_EN);
-	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)) {
+	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)) {
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
 			val |= MAC_PHYCFG1_RGMII_EXT_RX_DEC;
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
@@ -1015,7 +1015,7 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 		 MAC_RGMII_MODE_TX_ENABLE |
 		 MAC_RGMII_MODE_TX_LOWPWR |
 		 MAC_RGMII_MODE_TX_RESET);
-	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)) {
+	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)) {
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
 			val |= MAC_RGMII_MODE_RX_INT_B |
 			       MAC_RGMII_MODE_RX_QUALITY |
@@ -1125,7 +1125,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 				     PHY_BRCM_RX_REFCLK_UNUSED |
 				     PHY_BRCM_DIS_TXCRXC_NOENRGY |
 				     PHY_BRCM_AUTO_PWRDWN_ENABLE;
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
+		if (tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)
 			phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
 			phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
@@ -12365,8 +12365,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 				tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
 		}
 
-		if (cfg4 & NIC_SRAM_RGMII_STD_IBND_DISABLE)
-			tp->tg3_flags3 |= TG3_FLG3_RGMII_STD_IBND_DISABLE;
+		if (cfg4 & NIC_SRAM_RGMII_INBAND_DISABLE)
+			tp->tg3_flags3 |= TG3_FLG3_RGMII_INBAND_DISABLE;
 		if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_RX_EN)
 			tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_RX_EN;
 		if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_TX_EN)
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ffc12b1cb388..d2712c5b78ec 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1979,7 +1979,7 @@
 
 #define NIC_SRAM_DATA_CFG_4		0x00000d60
 #define  NIC_SRAM_GMII_MODE		 0x00000002
-#define  NIC_SRAM_RGMII_STD_IBND_DISABLE 0x00000004
+#define  NIC_SRAM_RGMII_INBAND_DISABLE	 0x00000004
 #define  NIC_SRAM_RGMII_EXT_IBND_RX_EN	 0x00000008
 #define  NIC_SRAM_RGMII_EXT_IBND_TX_EN	 0x00000010
 
@@ -2825,7 +2825,7 @@ struct tg3 {
 #define TG3_FLG3_USE_PHYLIB		0x00000010
 #define TG3_FLG3_MDIOBUS_INITED		0x00000020
 #define TG3_FLG3_PHY_CONNECTED		0x00000080
-#define TG3_FLG3_RGMII_STD_IBND_DISABLE	0x00000100
+#define TG3_FLG3_RGMII_INBAND_DISABLE	0x00000100
 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN	0x00000200
 #define TG3_FLG3_RGMII_EXT_IBND_TX_EN	0x00000400
 #define TG3_FLG3_CLKREQ_BUG		0x00000800
-- 
cgit v1.2.3


From 0d86df808886d4e56c46a9c356dfb81146e3b6d1 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:17:00 +0000
Subject: tg3: Reduce indent level of tg3_rx_prodring_alloc

This patch adds an inverted "jumbo ring enable" test and jumps to the exit
if it succeeds.  The change reduces the indent level of the remaining
code making it more readable.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 48 ++++++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 09e3af0d1743..c38143b7b600 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -6087,31 +6087,31 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
 
 	memset(tpr->rx_jmb, 0, TG3_RX_JUMBO_RING_BYTES);
 
-	if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
-		for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
-			struct tg3_rx_buffer_desc *rxd;
-
-			rxd = &tpr->rx_jmb[i].std;
-			rxd->idx_len = TG3_RX_JMB_DMA_SZ << RXD_LEN_SHIFT;
-			rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT) |
-				RXD_FLAG_JUMBO;
-			rxd->opaque = (RXD_OPAQUE_RING_JUMBO |
-			       (i << RXD_OPAQUE_INDEX_SHIFT));
-		}
+	if (!(tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE))
+		goto done;
 
-		for (i = 0; i < tp->rx_jumbo_pending; i++) {
-			if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO,
-					     i) < 0) {
-				printk(KERN_WARNING PFX
-				       "%s: Using a smaller RX jumbo ring, "
-				       "only %d out of %d buffers were "
-				       "allocated successfully.\n",
-				       tp->dev->name, i, tp->rx_jumbo_pending);
-				if (i == 0)
-					goto initfail;
-				tp->rx_jumbo_pending = i;
-				break;
-			}
+	for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
+		struct tg3_rx_buffer_desc *rxd;
+
+		rxd = &tpr->rx_jmb[i].std;
+		rxd->idx_len = TG3_RX_JMB_DMA_SZ << RXD_LEN_SHIFT;
+		rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT) |
+				  RXD_FLAG_JUMBO;
+		rxd->opaque = (RXD_OPAQUE_RING_JUMBO |
+		       (i << RXD_OPAQUE_INDEX_SHIFT));
+	}
+
+	for (i = 0; i < tp->rx_jumbo_pending; i++) {
+		if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO, i) < 0) {
+			printk(KERN_WARNING PFX
+			       "%s: Using a smaller RX jumbo ring, "
+			       "only %d out of %d buffers were "
+			       "allocated successfully.\n",
+			       tp->dev->name, i, tp->rx_jumbo_pending);
+			if (i == 0)
+				goto initfail;
+			tp->rx_jumbo_pending = i;
+			break;
 		}
 	}
 
-- 
cgit v1.2.3


From 9ea4818dd39cc8c6b31c38c9f51d19d5d4ee0be6 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:17:01 +0000
Subject: tg3: Discover phy address once

The phy address will not change after it has been identified.  Move the
discovery code to a location that only gets executed once.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c38143b7b600..3a62cc50c210 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1035,6 +1035,17 @@ static void tg3_mdio_start(struct tg3 *tp)
 	tw32_f(MAC_MI_MODE, tp->mi_mode);
 	udelay(80);
 
+	if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+		tg3_mdio_config_5785(tp);
+}
+
+static int tg3_mdio_init(struct tg3 *tp)
+{
+	int i;
+	u32 reg;
+	struct phy_device *phydev;
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
 		u32 funcnum, is_serdes;
 
@@ -1054,17 +1065,6 @@ static void tg3_mdio_start(struct tg3 *tp)
 	} else
 		tp->phy_addr = TG3_PHY_MII_ADDR;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
-		tg3_mdio_config_5785(tp);
-}
-
-static int tg3_mdio_init(struct tg3 *tp)
-{
-	int i;
-	u32 reg;
-	struct phy_device *phydev;
-
 	tg3_mdio_start(tp);
 
 	if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) ||
-- 
cgit v1.2.3


From 24daf2b0a4005f3a4e757752fcfed9da276cf202 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:17:02 +0000
Subject: tg3: Reformat SSID to phy ID table

This patch reformats the SSID to phy ID table, replacing constants with
preprocessor definitions.  This patch is also prep work for the
following patch, which will push line lengths beyond 80 chars.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 84 ++++++++++++++++++++++++++++++++++++-------------------
 drivers/net/tg3.h | 34 +++++++++++++++++++++-
 2 files changed, 88 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3a62cc50c210..b545ea7e0ad6 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12112,45 +12112,71 @@ struct subsys_tbl_ent {
 	u32 phy_id;
 };
 
-static struct subsys_tbl_ent subsys_id_to_phy_id[] = {
+static struct subsys_tbl_ent subsys_id_to_phy_id[] __devinitdata = {
 	/* Broadcom boards. */
-	{ PCI_VENDOR_ID_BROADCOM, 0x1644, PHY_ID_BCM5401 }, /* BCM95700A6 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0001, PHY_ID_BCM5701 }, /* BCM95701A5 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0002, PHY_ID_BCM8002 }, /* BCM95700T6 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0003, 0 },		    /* BCM95700A9 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0005, PHY_ID_BCM5701 }, /* BCM95701T1 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0006, PHY_ID_BCM5701 }, /* BCM95701T8 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0007, 0 },		    /* BCM95701A7 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0008, PHY_ID_BCM5701 }, /* BCM95701A10 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x8008, PHY_ID_BCM5701 }, /* BCM95701A12 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x0009, PHY_ID_BCM5703 }, /* BCM95703Ax1 */
-	{ PCI_VENDOR_ID_BROADCOM, 0x8009, PHY_ID_BCM5703 }, /* BCM95703Ax2 */
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6, PHY_ID_BCM5401 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A5, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700T6, PHY_ID_BCM8002 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700A9, 0 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701T1, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701T8, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A7, 0 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A10, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A12, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX1, PHY_ID_BCM5703 },
+	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX2, PHY_ID_BCM5703 },
 
 	/* 3com boards. */
-	{ PCI_VENDOR_ID_3COM, 0x1000, PHY_ID_BCM5401 }, /* 3C996T */
-	{ PCI_VENDOR_ID_3COM, 0x1006, PHY_ID_BCM5701 }, /* 3C996BT */
-	{ PCI_VENDOR_ID_3COM, 0x1004, 0 },		/* 3C996SX */
-	{ PCI_VENDOR_ID_3COM, 0x1007, PHY_ID_BCM5701 }, /* 3C1000T */
-	{ PCI_VENDOR_ID_3COM, 0x1008, PHY_ID_BCM5701 }, /* 3C940BR01 */
+	{ TG3PCI_SUBVENDOR_ID_3COM,
+	  TG3PCI_SUBDEVICE_ID_3COM_3C996T, PHY_ID_BCM5401 },
+	{ TG3PCI_SUBVENDOR_ID_3COM,
+	  TG3PCI_SUBDEVICE_ID_3COM_3C996BT, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_3COM,
+	  TG3PCI_SUBDEVICE_ID_3COM_3C996SX, 0 },
+	{ TG3PCI_SUBVENDOR_ID_3COM,
+	  TG3PCI_SUBDEVICE_ID_3COM_3C1000T, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_3COM,
+	  TG3PCI_SUBDEVICE_ID_3COM_3C940BR01, PHY_ID_BCM5701 },
 
 	/* DELL boards. */
-	{ PCI_VENDOR_ID_DELL, 0x00d1, PHY_ID_BCM5401 }, /* VIPER */
-	{ PCI_VENDOR_ID_DELL, 0x0106, PHY_ID_BCM5401 }, /* JAGUAR */
-	{ PCI_VENDOR_ID_DELL, 0x0109, PHY_ID_BCM5411 }, /* MERLOT */
-	{ PCI_VENDOR_ID_DELL, 0x010a, PHY_ID_BCM5411 }, /* SLIM_MERLOT */
+	{ TG3PCI_SUBVENDOR_ID_DELL,
+	  TG3PCI_SUBDEVICE_ID_DELL_VIPER, PHY_ID_BCM5401 },
+	{ TG3PCI_SUBVENDOR_ID_DELL,
+	  TG3PCI_SUBDEVICE_ID_DELL_JAGUAR, PHY_ID_BCM5401 },
+	{ TG3PCI_SUBVENDOR_ID_DELL,
+	  TG3PCI_SUBDEVICE_ID_DELL_MERLOT, PHY_ID_BCM5411 },
+	{ TG3PCI_SUBVENDOR_ID_DELL,
+	  TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT, PHY_ID_BCM5411 },
 
 	/* Compaq boards. */
-	{ PCI_VENDOR_ID_COMPAQ, 0x007c, PHY_ID_BCM5701 }, /* BANSHEE */
-	{ PCI_VENDOR_ID_COMPAQ, 0x009a, PHY_ID_BCM5701 }, /* BANSHEE_2 */
-	{ PCI_VENDOR_ID_COMPAQ, 0x007d, 0 },		  /* CHANGELING */
-	{ PCI_VENDOR_ID_COMPAQ, 0x0085, PHY_ID_BCM5701 }, /* NC7780 */
-	{ PCI_VENDOR_ID_COMPAQ, 0x0099, PHY_ID_BCM5701 }, /* NC7780_2 */
+	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_CHANGELING, 0 },
+	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780, PHY_ID_BCM5701 },
+	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780_2, PHY_ID_BCM5701 },
 
 	/* IBM boards. */
-	{ PCI_VENDOR_ID_IBM, 0x0281, 0 } /* IBM??? */
+	{ TG3PCI_SUBVENDOR_ID_IBM,
+	  TG3PCI_SUBDEVICE_ID_IBM_5703SAX2, 0 }
 };
 
-static inline struct subsys_tbl_ent *lookup_by_subsys(struct tg3 *tp)
+static struct subsys_tbl_ent * __devinit tg3_lookup_by_subsys(struct tg3 *tp)
 {
 	int i;
 
@@ -12476,7 +12502,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 			/* No eeprom signature?  Try the hardcoded
 			 * subsys device table.
 			 */
-			p = lookup_by_subsys(tp);
+			p = tg3_lookup_by_subsys(tp);
 			if (!p)
 				return -ENODEV;
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index d2712c5b78ec..12ce22644ac8 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -56,7 +56,39 @@
 #define  TG3PCI_DEVICE_TIGON3_57765	 0x16b4
 #define  TG3PCI_DEVICE_TIGON3_57791	 0x16b2
 #define  TG3PCI_DEVICE_TIGON3_57795	 0x16b6
-/* 0x04 --> 0x64 unused */
+/* 0x04 --> 0x2c unused */
+#define TG3PCI_SUBVENDOR_ID_BROADCOM		PCI_VENDOR_ID_BROADCOM
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6	0x1644
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95701A5	0x0001
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95700T6	0x0002
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95700A9	0x0003
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95701T1	0x0005
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95701T8	0x0006
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95701A7	0x0007
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95701A10	0x0008
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95701A12	0x8008
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX1	0x0009
+#define TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX2	0x8009
+#define TG3PCI_SUBVENDOR_ID_3COM		PCI_VENDOR_ID_3COM
+#define TG3PCI_SUBDEVICE_ID_3COM_3C996T		0x1000
+#define TG3PCI_SUBDEVICE_ID_3COM_3C996BT	0x1006
+#define TG3PCI_SUBDEVICE_ID_3COM_3C996SX	0x1004
+#define TG3PCI_SUBDEVICE_ID_3COM_3C1000T	0x1007
+#define TG3PCI_SUBDEVICE_ID_3COM_3C940BR01	0x1008
+#define TG3PCI_SUBVENDOR_ID_DELL		PCI_VENDOR_ID_DELL
+#define TG3PCI_SUBDEVICE_ID_DELL_VIPER		0x00d1
+#define TG3PCI_SUBDEVICE_ID_DELL_JAGUAR		0x0106
+#define TG3PCI_SUBDEVICE_ID_DELL_MERLOT		0x0109
+#define TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT	0x010a
+#define TG3PCI_SUBVENDOR_ID_COMPAQ		PCI_VENDOR_ID_COMPAQ
+#define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE	0x007c
+#define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2	0x009a
+#define TG3PCI_SUBDEVICE_ID_COMPAQ_CHANGELING	0x007d
+#define TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780	0x0085
+#define TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780_2	0x0099
+#define TG3PCI_SUBVENDOR_ID_IBM			PCI_VENDOR_ID_IBM
+#define TG3PCI_SUBDEVICE_ID_IBM_5703SAX2	0x0281
+/* 0x30 --> 0x64 unused */
 #define TG3PCI_MSI_DATA			0x00000064
 /* 0x66 --> 0x68 unused */
 #define TG3PCI_MISC_HOST_CTRL		0x00000068
-- 
cgit v1.2.3


From 79eb6904361fe4e54e589919a9b62c5e036c42c3 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:17:03 +0000
Subject: tg3: Rename tg3 phy ID preprocessor definitions

The phylib presents the phy ID in a different format than the one tg3
has traditionally used.  To highlight the distinction, this patch
prepends the tg3 native phy ID format with TG3.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 122 +++++++++++++++++++++++++++---------------------------
 drivers/net/tg3.h |  91 ++++++++++++++++++++--------------------
 2 files changed, 106 insertions(+), 107 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b545ea7e0ad6..965efa92b020 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1995,7 +1995,7 @@ out:
 	}
 	/* Set Extended packet length bit (bit 14) on all chips that */
 	/* support jumbo frames */
-	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
+	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
 		/* Cannot do read-modify-write on 5401 */
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
 	} else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
@@ -2147,7 +2147,7 @@ static int tg3_5700_link_polarity(struct tg3 *tp, u32 speed)
 {
 	if (tp->led_ctrl == LED_CTRL_MODE_PHY_2)
 		return 1;
-	else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411) {
+	else if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5411) {
 		if (speed != SPEED_10)
 			return 1;
 	} else if (speed == SPEED_10)
@@ -3077,7 +3077,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 	if (force_reset)
 		tg3_phy_reset(tp);
 
-	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
+	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
 		tg3_readphy(tp, MII_BMSR, &bmsr);
 		if (tg3_readphy(tp, MII_BMSR, &bmsr) ||
 		    !(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
@@ -3098,7 +3098,8 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 				}
 			}
 
-			if ((tp->phy_id & PHY_ID_REV_MASK) == PHY_REV_BCM5401_B0 &&
+			if ((tp->phy_id & TG3_PHY_ID_REV_MASK) ==
+			    TG3_PHY_REV_BCM5401_B0 &&
 			    !(bmsr & BMSR_LSTATUS) &&
 			    tp->link_config.active_speed == SPEED_1000) {
 				err = tg3_phy_reset(tp);
@@ -3253,7 +3254,7 @@ relink:
 	/* ??? Without this setting Netgear GA302T PHY does not
 	 * ??? send/receive packets...
 	 */
-	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411 &&
+	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5411 &&
 	    tp->pci_chip_rev_id == CHIPREV_ID_5700_ALTIMA) {
 		tp->mi_mode |= MAC_MI_MODE_AUTO_POLL;
 		tw32_f(MAC_MI_MODE, tp->mi_mode);
@@ -3968,7 +3969,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 	tw32_f(MAC_MODE, tp->mac_mode);
 	udelay(40);
 
-	if (tp->phy_id == PHY_ID_BCM8002)
+	if (tp->phy_id == TG3_PHY_ID_BCM8002)
 		tg3_init_bcm8002(tp);
 
 	/* Enable link change event even when serdes polling.  */
@@ -10854,9 +10855,10 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 			tw32_f(MAC_RX_MODE, tp->rx_mode);
 		}
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
-			if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)
+			u32 masked_phy_id = tp->phy_id & TG3_PHY_ID_MASK;
+			if (masked_phy_id == TG3_PHY_ID_BCM5401)
 				mac_mode &= ~MAC_MODE_LINK_POLARITY;
-			else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411)
+			else if (masked_phy_id == TG3_PHY_ID_BCM5411)
 				mac_mode |= MAC_MODE_LINK_POLARITY;
 			tg3_writephy(tp, MII_TG3_EXT_CTRL,
 				     MII_TG3_EXT_CTRL_LNK3_LED_MODE);
@@ -12115,61 +12117,61 @@ struct subsys_tbl_ent {
 static struct subsys_tbl_ent subsys_id_to_phy_id[] __devinitdata = {
 	/* Broadcom boards. */
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6, PHY_ID_BCM5401 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6, TG3_PHY_ID_BCM5401 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A5, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A5, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700T6, PHY_ID_BCM8002 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700T6, TG3_PHY_ID_BCM8002 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
 	  TG3PCI_SUBDEVICE_ID_BROADCOM_95700A9, 0 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701T1, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701T1, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701T8, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701T8, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
 	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A7, 0 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A10, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A10, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A12, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95701A12, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX1, PHY_ID_BCM5703 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX1, TG3_PHY_ID_BCM5703 },
 	{ TG3PCI_SUBVENDOR_ID_BROADCOM,
-	  TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX2, PHY_ID_BCM5703 },
+	  TG3PCI_SUBDEVICE_ID_BROADCOM_95703AX2, TG3_PHY_ID_BCM5703 },
 
 	/* 3com boards. */
 	{ TG3PCI_SUBVENDOR_ID_3COM,
-	  TG3PCI_SUBDEVICE_ID_3COM_3C996T, PHY_ID_BCM5401 },
+	  TG3PCI_SUBDEVICE_ID_3COM_3C996T, TG3_PHY_ID_BCM5401 },
 	{ TG3PCI_SUBVENDOR_ID_3COM,
-	  TG3PCI_SUBDEVICE_ID_3COM_3C996BT, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_3COM_3C996BT, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_3COM,
 	  TG3PCI_SUBDEVICE_ID_3COM_3C996SX, 0 },
 	{ TG3PCI_SUBVENDOR_ID_3COM,
-	  TG3PCI_SUBDEVICE_ID_3COM_3C1000T, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_3COM_3C1000T, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_3COM,
-	  TG3PCI_SUBDEVICE_ID_3COM_3C940BR01, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_3COM_3C940BR01, TG3_PHY_ID_BCM5701 },
 
 	/* DELL boards. */
 	{ TG3PCI_SUBVENDOR_ID_DELL,
-	  TG3PCI_SUBDEVICE_ID_DELL_VIPER, PHY_ID_BCM5401 },
+	  TG3PCI_SUBDEVICE_ID_DELL_VIPER, TG3_PHY_ID_BCM5401 },
 	{ TG3PCI_SUBVENDOR_ID_DELL,
-	  TG3PCI_SUBDEVICE_ID_DELL_JAGUAR, PHY_ID_BCM5401 },
+	  TG3PCI_SUBDEVICE_ID_DELL_JAGUAR, TG3_PHY_ID_BCM5401 },
 	{ TG3PCI_SUBVENDOR_ID_DELL,
-	  TG3PCI_SUBDEVICE_ID_DELL_MERLOT, PHY_ID_BCM5411 },
+	  TG3PCI_SUBDEVICE_ID_DELL_MERLOT, TG3_PHY_ID_BCM5411 },
 	{ TG3PCI_SUBVENDOR_ID_DELL,
-	  TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT, PHY_ID_BCM5411 },
+	  TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT, TG3_PHY_ID_BCM5411 },
 
 	/* Compaq boards. */
 	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
-	  TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
-	  TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
 	  TG3PCI_SUBDEVICE_ID_COMPAQ_CHANGELING, 0 },
 	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
-	  TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780, TG3_PHY_ID_BCM5701 },
 	{ TG3PCI_SUBVENDOR_ID_COMPAQ,
-	  TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780_2, PHY_ID_BCM5701 },
+	  TG3PCI_SUBDEVICE_ID_COMPAQ_NC7780_2, TG3_PHY_ID_BCM5701 },
 
 	/* IBM boards. */
 	{ TG3PCI_SUBVENDOR_ID_IBM,
@@ -12217,7 +12219,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 	val = tr32(MEMARB_MODE);
 	tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
 
-	tp->phy_id = PHY_ID_INVALID;
+	tp->phy_id = TG3_PHY_ID_INVALID;
 	tp->led_ctrl = LED_CTRL_MODE_PHY_1;
 
 	/* Assume an onboard device and WOL capable by default.  */
@@ -12468,7 +12470,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 	err = 0;
 	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
 	    (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
-		hw_phy_id = hw_phy_id_masked = PHY_ID_INVALID;
+		hw_phy_id = hw_phy_id_masked = TG3_PHY_ID_INVALID;
 	} else {
 		/* Now read the physical PHY_ID from the chip and verify
 		 * that it is sane.  If it doesn't look good, we fall back
@@ -12482,17 +12484,17 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		hw_phy_id |= (hw_phy_id_2 & 0xfc00) << 16;
 		hw_phy_id |= (hw_phy_id_2 & 0x03ff) <<  0;
 
-		hw_phy_id_masked = hw_phy_id & PHY_ID_MASK;
+		hw_phy_id_masked = hw_phy_id & TG3_PHY_ID_MASK;
 	}
 
-	if (!err && KNOWN_PHY_ID(hw_phy_id_masked)) {
+	if (!err && TG3_KNOWN_PHY_ID(hw_phy_id_masked)) {
 		tp->phy_id = hw_phy_id;
-		if (hw_phy_id_masked == PHY_ID_BCM8002)
+		if (hw_phy_id_masked == TG3_PHY_ID_BCM8002)
 			tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
 		else
 			tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES;
 	} else {
-		if (tp->phy_id != PHY_ID_INVALID) {
+		if (tp->phy_id != TG3_PHY_ID_INVALID) {
 			/* Do nothing, phy ID already set up in
 			 * tg3_get_eeprom_hw_cfg().
 			 */
@@ -12508,7 +12510,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 
 			tp->phy_id = p->phy_id;
 			if (!tp->phy_id ||
-			    tp->phy_id == PHY_ID_BCM8002)
+			    tp->phy_id == TG3_PHY_ID_BCM8002)
 				tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
 		}
 	}
@@ -12560,13 +12562,11 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 	}
 
 skip_phy_reset:
-	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
+	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
 		err = tg3_init_5401phy_dsp(tp);
 		if (err)
 			return err;
-	}
 
-	if (!err && ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)) {
 		err = tg3_init_5401phy_dsp(tp);
 	}
 
@@ -14317,28 +14317,28 @@ static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
 
 static char * __devinit tg3_phy_string(struct tg3 *tp)
 {
-	switch (tp->phy_id & PHY_ID_MASK) {
-	case PHY_ID_BCM5400:	return "5400";
-	case PHY_ID_BCM5401:	return "5401";
-	case PHY_ID_BCM5411:	return "5411";
-	case PHY_ID_BCM5701:	return "5701";
-	case PHY_ID_BCM5703:	return "5703";
-	case PHY_ID_BCM5704:	return "5704";
-	case PHY_ID_BCM5705:	return "5705";
-	case PHY_ID_BCM5750:	return "5750";
-	case PHY_ID_BCM5752:	return "5752";
-	case PHY_ID_BCM5714:	return "5714";
-	case PHY_ID_BCM5780:	return "5780";
-	case PHY_ID_BCM5755:	return "5755";
-	case PHY_ID_BCM5787:	return "5787";
-	case PHY_ID_BCM5784:	return "5784";
-	case PHY_ID_BCM5756:	return "5722/5756";
-	case PHY_ID_BCM5906:	return "5906";
-	case PHY_ID_BCM5761:	return "5761";
-	case PHY_ID_BCM5718C:	return "5718C";
-	case PHY_ID_BCM5718S:	return "5718S";
-	case PHY_ID_BCM57765:	return "57765";
-	case PHY_ID_BCM8002:	return "8002/serdes";
+	switch (tp->phy_id & TG3_PHY_ID_MASK) {
+	case TG3_PHY_ID_BCM5400:	return "5400";
+	case TG3_PHY_ID_BCM5401:	return "5401";
+	case TG3_PHY_ID_BCM5411:	return "5411";
+	case TG3_PHY_ID_BCM5701:	return "5701";
+	case TG3_PHY_ID_BCM5703:	return "5703";
+	case TG3_PHY_ID_BCM5704:	return "5704";
+	case TG3_PHY_ID_BCM5705:	return "5705";
+	case TG3_PHY_ID_BCM5750:	return "5750";
+	case TG3_PHY_ID_BCM5752:	return "5752";
+	case TG3_PHY_ID_BCM5714:	return "5714";
+	case TG3_PHY_ID_BCM5780:	return "5780";
+	case TG3_PHY_ID_BCM5755:	return "5755";
+	case TG3_PHY_ID_BCM5787:	return "5787";
+	case TG3_PHY_ID_BCM5784:	return "5784";
+	case TG3_PHY_ID_BCM5756:	return "5722/5756";
+	case TG3_PHY_ID_BCM5906:	return "5906";
+	case TG3_PHY_ID_BCM5761:	return "5761";
+	case TG3_PHY_ID_BCM5718C:	return "5718C";
+	case TG3_PHY_ID_BCM5718S:	return "5718S";
+	case TG3_PHY_ID_BCM57765:	return "57765";
+	case TG3_PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
 	}
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 12ce22644ac8..800dec463e98 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2921,45 +2921,59 @@ struct tg3 {
 
 	/* PHY info */
 	u32				phy_id;
-#define PHY_ID_MASK			0xfffffff0
-#define PHY_ID_BCM5400			0x60008040
-#define PHY_ID_BCM5401			0x60008050
-#define PHY_ID_BCM5411			0x60008070
-#define PHY_ID_BCM5701			0x60008110
-#define PHY_ID_BCM5703			0x60008160
-#define PHY_ID_BCM5704			0x60008190
-#define PHY_ID_BCM5705			0x600081a0
-#define PHY_ID_BCM5750			0x60008180
-#define PHY_ID_BCM5752			0x60008100
-#define PHY_ID_BCM5714			0x60008340
-#define PHY_ID_BCM5780			0x60008350
-#define PHY_ID_BCM5755			0xbc050cc0
-#define PHY_ID_BCM5787			0xbc050ce0
-#define PHY_ID_BCM5756			0xbc050ed0
-#define PHY_ID_BCM5784			0xbc050fa0
-#define PHY_ID_BCM5761			0xbc050fd0
-#define PHY_ID_BCM5718C			0x5c0d8a00
-#define PHY_ID_BCM5718S			0xbc050ff0
-#define PHY_ID_BCM57765			0x5c0d8a40
-#define PHY_ID_BCM5906			0xdc00ac40
-#define PHY_ID_BCM8002			0x60010140
-#define PHY_ID_INVALID			0xffffffff
-#define PHY_ID_REV_MASK			0x0000000f
-#define PHY_REV_BCM5401_B0		0x1
-#define PHY_REV_BCM5401_B2		0x3
-#define PHY_REV_BCM5401_C0		0x6
-#define PHY_REV_BCM5411_X0		0x1 /* Found on Netgear GA302T */
-#define TG3_PHY_ID_BCM50610		0x143bd60
-#define TG3_PHY_ID_BCM50610M	0x143bd70
-#define TG3_PHY_ID_BCMAC131		0x143bc70
+#define TG3_PHY_ID_MASK			0xfffffff0
+#define TG3_PHY_ID_BCM5400		0x60008040
+#define TG3_PHY_ID_BCM5401		0x60008050
+#define TG3_PHY_ID_BCM5411		0x60008070
+#define TG3_PHY_ID_BCM5701		0x60008110
+#define TG3_PHY_ID_BCM5703		0x60008160
+#define TG3_PHY_ID_BCM5704		0x60008190
+#define TG3_PHY_ID_BCM5705		0x600081a0
+#define TG3_PHY_ID_BCM5750		0x60008180
+#define TG3_PHY_ID_BCM5752		0x60008100
+#define TG3_PHY_ID_BCM5714		0x60008340
+#define TG3_PHY_ID_BCM5780		0x60008350
+#define TG3_PHY_ID_BCM5755		0xbc050cc0
+#define TG3_PHY_ID_BCM5787		0xbc050ce0
+#define TG3_PHY_ID_BCM5756		0xbc050ed0
+#define TG3_PHY_ID_BCM5784		0xbc050fa0
+#define TG3_PHY_ID_BCM5761		0xbc050fd0
+#define TG3_PHY_ID_BCM5718C		0x5c0d8a00
+#define TG3_PHY_ID_BCM5718S		0xbc050ff0
+#define TG3_PHY_ID_BCM57765		0x5c0d8a40
+#define TG3_PHY_ID_BCM5906		0xdc00ac40
+#define TG3_PHY_ID_BCM8002		0x60010140
+#define TG3_PHY_ID_BCM50610		0x0143bd60
+#define TG3_PHY_ID_BCM50610M		0x0143bd70
+#define TG3_PHY_ID_BCMAC131		0x0143bc70
 #define TG3_PHY_ID_RTL8211C		0x001cc910
 #define TG3_PHY_ID_RTL8201E		0x00008200
 #define TG3_PHY_ID_BCM57780		0x03625d90
+#define TG3_PHY_ID_INVALID		0xffffffff
+
+#define TG3_PHY_ID_REV_MASK		0x0000000f
+#define TG3_PHY_REV_BCM5401_B0		0x1
+
 #define TG3_PHY_OUI_MASK		0xfffffc00
 #define TG3_PHY_OUI_1			0x00206000
 #define TG3_PHY_OUI_2			0x0143bc00
 #define TG3_PHY_OUI_3			0x03625c00
 
+	/* This macro assumes the passed PHY ID is
+	 * already masked with TG3_PHY_ID_MASK.
+	 */
+#define TG3_KNOWN_PHY_ID(X)		\
+	((X) == TG3_PHY_ID_BCM5400 || (X) == TG3_PHY_ID_BCM5401 || \
+	 (X) == TG3_PHY_ID_BCM5411 || (X) == TG3_PHY_ID_BCM5701 || \
+	 (X) == TG3_PHY_ID_BCM5703 || (X) == TG3_PHY_ID_BCM5704 || \
+	 (X) == TG3_PHY_ID_BCM5705 || (X) == TG3_PHY_ID_BCM5750 || \
+	 (X) == TG3_PHY_ID_BCM5752 || (X) == TG3_PHY_ID_BCM5714 || \
+	 (X) == TG3_PHY_ID_BCM5780 || (X) == TG3_PHY_ID_BCM5787 || \
+	 (X) == TG3_PHY_ID_BCM5755 || (X) == TG3_PHY_ID_BCM5756 || \
+	 (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
+	 (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
+	 (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM8002)
+
 	u32				led_ctrl;
 	u32				phy_otp;
 
@@ -2971,21 +2985,6 @@ struct tg3 {
 	u32				pci_clock_ctrl;
 	struct pci_dev			*pdev_peer;
 
-	/* This macro assumes the passed PHY ID is already masked
-	 * with PHY_ID_MASK.
-	 */
-#define KNOWN_PHY_ID(X)		\
-	((X) == PHY_ID_BCM5400 || (X) == PHY_ID_BCM5401 || \
-	 (X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \
-	 (X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \
-	 (X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \
-	 (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
-	 (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
-	 (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
-	 (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
-	 (X) == PHY_ID_BCM5718C || (X) == PHY_ID_BCM5718S || \
-	 (X) == PHY_ID_BCM57765 || (X) == PHY_ID_BCM8002)
-
 	struct tg3_hw_stats		*hw_stats;
 	dma_addr_t			stats_mapping;
 	struct work_struct		reset_task;
-- 
cgit v1.2.3


From 6a443a0f72ad7706345412dbd2e4d4981fdfce39 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:17:04 +0000
Subject: tg3: Push phylib definitions to phylib

This patch pushes phylib definitions out to phylib headers.  For phy
IDs, this removes some code duplication.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/broadcom.c |  5 +----
 drivers/net/tg3.c          | 32 ++++++++++++++++----------------
 drivers/net/tg3.h          | 14 +++-----------
 include/linux/brcmphy.h    | 11 +++++++++++
 4 files changed, 31 insertions(+), 31 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 33c4b12a63ba..f482fc4f8cf1 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -18,9 +18,6 @@
 #include <linux/phy.h>
 #include <linux/brcmphy.h>
 
-#define PHY_ID_BCM50610		0x0143bd60
-#define PHY_ID_BCM50610M	0x0143bd70
-#define PHY_ID_BCM57780		0x03625d90
 
 #define BRCM_PHY_MODEL(phydev) \
 	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
@@ -823,7 +820,7 @@ static struct phy_driver bcm57780_driver = {
 };
 
 static struct phy_driver bcmac131_driver = {
-	.phy_id		= 0x0143bc70,
+	.phy_id		= PHY_ID_BCMAC131,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCMAC131",
 	.features	= PHY_BASIC_FEATURES |
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 965efa92b020..994bac0b018b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -955,17 +955,17 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 
 	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 	switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
-	case TG3_PHY_ID_BCM50610:
-	case TG3_PHY_ID_BCM50610M:
+	case PHY_ID_BCM50610:
+	case PHY_ID_BCM50610M:
 		val = MAC_PHYCFG2_50610_LED_MODES;
 		break;
-	case TG3_PHY_ID_BCMAC131:
+	case PHY_ID_BCMAC131:
 		val = MAC_PHYCFG2_AC131_LED_MODES;
 		break;
-	case TG3_PHY_ID_RTL8211C:
+	case PHY_ID_RTL8211C:
 		val = MAC_PHYCFG2_RTL8211C_LED_MODES;
 		break;
-	case TG3_PHY_ID_RTL8201E:
+	case PHY_ID_RTL8201E:
 		val = MAC_PHYCFG2_RTL8201E_LED_MODES;
 		break;
 	default:
@@ -1115,12 +1115,12 @@ static int tg3_mdio_init(struct tg3 *tp)
 	}
 
 	switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
-	case TG3_PHY_ID_BCM57780:
+	case PHY_ID_BCM57780:
 		phydev->interface = PHY_INTERFACE_MODE_GMII;
 		phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		break;
-	case TG3_PHY_ID_BCM50610:
-	case TG3_PHY_ID_BCM50610M:
+	case PHY_ID_BCM50610:
+	case PHY_ID_BCM50610M:
 		phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
 				     PHY_BRCM_RX_REFCLK_UNUSED |
 				     PHY_BRCM_DIS_TXCRXC_NOENRGY |
@@ -1132,11 +1132,11 @@ static int tg3_mdio_init(struct tg3 *tp)
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
 			phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
 		/* fallthru */
-	case TG3_PHY_ID_RTL8211C:
+	case PHY_ID_RTL8211C:
 		phydev->interface = PHY_INTERFACE_MODE_RGMII;
 		break;
-	case TG3_PHY_ID_RTL8201E:
-	case TG3_PHY_ID_BCMAC131:
+	case PHY_ID_RTL8201E:
+	case PHY_ID_BCMAC131:
 		phydev->interface = PHY_INTERFACE_MODE_MII;
 		phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
@@ -2563,11 +2563,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 			phy_start_aneg(phydev);
 
 			phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask;
-			if (phyid != TG3_PHY_ID_BCMAC131) {
-				phyid &= TG3_PHY_OUI_MASK;
-				if (phyid == TG3_PHY_OUI_1 ||
-				    phyid == TG3_PHY_OUI_2 ||
-				    phyid == TG3_PHY_OUI_3)
+			if (phyid != PHY_ID_BCMAC131) {
+				phyid &= PHY_BCM_OUI_MASK;
+				if (phyid == PHY_BCM_OUI_1 ||
+				    phyid == PHY_BCM_OUI_2 ||
+				    phyid == PHY_BCM_OUI_3)
 					do_low_power = true;
 			}
 		}
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 800dec463e98..574a1cc4d353 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2943,22 +2943,14 @@ struct tg3 {
 #define TG3_PHY_ID_BCM57765		0x5c0d8a40
 #define TG3_PHY_ID_BCM5906		0xdc00ac40
 #define TG3_PHY_ID_BCM8002		0x60010140
-#define TG3_PHY_ID_BCM50610		0x0143bd60
-#define TG3_PHY_ID_BCM50610M		0x0143bd70
-#define TG3_PHY_ID_BCMAC131		0x0143bc70
-#define TG3_PHY_ID_RTL8211C		0x001cc910
-#define TG3_PHY_ID_RTL8201E		0x00008200
-#define TG3_PHY_ID_BCM57780		0x03625d90
 #define TG3_PHY_ID_INVALID		0xffffffff
 
+#define PHY_ID_RTL8211C			0x001cc910
+#define PHY_ID_RTL8201E			0x00008200
+
 #define TG3_PHY_ID_REV_MASK		0x0000000f
 #define TG3_PHY_REV_BCM5401_B0		0x1
 
-#define TG3_PHY_OUI_MASK		0xfffffc00
-#define TG3_PHY_OUI_1			0x00206000
-#define TG3_PHY_OUI_2			0x0143bc00
-#define TG3_PHY_OUI_3			0x03625c00
-
 	/* This macro assumes the passed PHY ID is
 	 * already masked with TG3_PHY_ID_MASK.
 	 */
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 2b31b91f5871..7f437ca1ed44 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -1,3 +1,14 @@
+#define PHY_ID_BCM50610			0x0143bd60
+#define PHY_ID_BCM50610M		0x0143bd70
+#define PHY_ID_BCMAC131			0x0143bc70
+#define PHY_ID_BCM57780			0x03625d90
+
+#define PHY_BCM_OUI_MASK		0xfffffc00
+#define PHY_BCM_OUI_1			0x00206000
+#define PHY_BCM_OUI_2			0x0143bc00
+#define PHY_BCM_OUI_3			0x03625c00
+
+
 #define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
 #define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
 #define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
-- 
cgit v1.2.3


From be7ce5307ded2e416224baab0bd1e5072591f33f Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Wed, 17 Feb 2010 15:17:05 +0000
Subject: tg3: Update version to 3.108

This patch updates the tg3 version to 3.108.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 994bac0b018b..ddf66155f5e2 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.107"
-#define DRV_MODULE_RELDATE	"February 12, 2010"
+#define DRV_MODULE_VERSION	"3.108"
+#define DRV_MODULE_RELDATE	"February 17, 2010"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
-- 
cgit v1.2.3


From b4f18b3faccae13c0530ae8f7f20fe81d18f2bd5 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:48 +0000
Subject: drivers/net/8139cp.c: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/8139cp.c | 72 ++++++++++++++++++++++------------------------------
 1 file changed, 30 insertions(+), 42 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 60bc0b0ad4f3..3d4406b16658 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -46,6 +46,8 @@
 
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME		"8139cp"
 #define DRV_VERSION		"1.3"
 #define DRV_RELDATE		"Mar 22, 2004"
@@ -104,8 +106,6 @@ static int multicast_filter_limit = 32;
 module_param(multicast_filter_limit, int, 0);
 MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
 
-#define PFX			DRV_NAME ": "
-
 #define CP_DEF_MSG_ENABLE	(NETIF_MSG_DRV		| \
 				 NETIF_MSG_PROBE 	| \
 				 NETIF_MSG_LINK)
@@ -470,9 +470,8 @@ static inline void cp_rx_skb (struct cp_private *cp, struct sk_buff *skb,
 static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
 			    u32 status, u32 len)
 {
-	if (netif_msg_rx_err (cp))
-		pr_debug("%s: rx err, slot %d status 0x%x len %d\n",
-			cp->dev->name, rx_tail, status, len);
+	netif_dbg(cp, rx_err, cp->dev, "rx err, slot %d status 0x%x len %d\n",
+		  rx_tail, status, len);
 	cp->dev->stats.rx_errors++;
 	if (status & RxErrFrame)
 		cp->dev->stats.rx_frame_errors++;
@@ -545,9 +544,8 @@ rx_status_loop:
 			goto rx_next;
 		}
 
-		if (netif_msg_rx_status(cp))
-			pr_debug("%s: rx slot %d status 0x%x len %d\n",
-			       dev->name, rx_tail, status, len);
+		netif_dbg(cp, rx_status, dev, "rx slot %d status 0x%x len %d\n",
+			  rx_tail, status, len);
 
 		new_skb = netdev_alloc_skb_ip_align(dev, buflen);
 		if (!new_skb) {
@@ -621,9 +619,8 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 	if (!status || (status == 0xFFFF))
 		return IRQ_NONE;
 
-	if (netif_msg_intr(cp))
-		pr_debug("%s: intr, status %04x cmd %02x cpcmd %04x\n",
-		        dev->name, status, cpr8(Cmd), cpr16(CpCmd));
+	netif_dbg(cp, intr, dev, "intr, status %04x cmd %02x cpcmd %04x\n",
+		  status, cpr8(Cmd), cpr16(CpCmd));
 
 	cpw16(IntrStatus, status & ~cp_rx_intr_mask);
 
@@ -654,8 +651,8 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 
 		pci_read_config_word(cp->pdev, PCI_STATUS, &pci_status);
 		pci_write_config_word(cp->pdev, PCI_STATUS, pci_status);
-		pr_err("%s: PCI bus error, status=%04x, PCI status=%04x\n",
-		       dev->name, status, pci_status);
+		netdev_err(dev, "PCI bus error, status=%04x, PCI status=%04x\n",
+			   status, pci_status);
 
 		/* TODO: reset hardware */
 	}
@@ -700,9 +697,8 @@ static void cp_tx (struct cp_private *cp)
 
 		if (status & LastFrag) {
 			if (status & (TxError | TxFIFOUnder)) {
-				if (netif_msg_tx_err(cp))
-					pr_debug("%s: tx err, status 0x%x\n",
-					       cp->dev->name, status);
+				netif_dbg(cp, tx_err, cp->dev,
+					  "tx err, status 0x%x\n", status);
 				cp->dev->stats.tx_errors++;
 				if (status & TxOWC)
 					cp->dev->stats.tx_window_errors++;
@@ -717,8 +713,8 @@ static void cp_tx (struct cp_private *cp)
 					((status >> TxColCntShift) & TxColCntMask);
 				cp->dev->stats.tx_packets++;
 				cp->dev->stats.tx_bytes += skb->len;
-				if (netif_msg_tx_done(cp))
-					pr_debug("%s: tx done, slot %d\n", cp->dev->name, tx_tail);
+				netif_dbg(cp, tx_done, cp->dev,
+					  "tx done, slot %d\n", tx_tail);
 			}
 			dev_kfree_skb_irq(skb);
 		}
@@ -752,8 +748,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
 	if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&cp->lock, intr_flags);
-		pr_err(PFX "%s: BUG! Tx Ring full when queue awake!\n",
-		       dev->name);
+		netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
 		return NETDEV_TX_BUSY;
 	}
 
@@ -878,9 +873,8 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
 		wmb();
 	}
 	cp->tx_head = entry;
-	if (netif_msg_tx_queued(cp))
-		pr_debug("%s: tx queued, slot %d, skblen %d\n",
-		       dev->name, entry, skb->len);
+	netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n",
+		  entry, skb->len);
 	if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
 		netif_stop_queue(dev);
 
@@ -992,7 +986,7 @@ static void cp_reset_hw (struct cp_private *cp)
 		schedule_timeout_uninterruptible(10);
 	}
 
-	pr_err("%s: hardware reset timeout\n", cp->dev->name);
+	netdev_err(cp->dev, "hardware reset timeout\n");
 }
 
 static inline void cp_start_hw (struct cp_private *cp)
@@ -1159,8 +1153,7 @@ static int cp_open (struct net_device *dev)
 	struct cp_private *cp = netdev_priv(dev);
 	int rc;
 
-	if (netif_msg_ifup(cp))
-		pr_debug("%s: enabling interface\n", dev->name);
+	netif_dbg(cp, ifup, dev, "enabling interface\n");
 
 	rc = cp_alloc_rings(cp);
 	if (rc)
@@ -1194,8 +1187,7 @@ static int cp_close (struct net_device *dev)
 
 	napi_disable(&cp->napi);
 
-	if (netif_msg_ifdown(cp))
-		pr_debug("%s: disabling interface\n", dev->name);
+	netif_dbg(cp, ifdown, dev, "disabling interface\n");
 
 	spin_lock_irqsave(&cp->lock, flags);
 
@@ -1218,9 +1210,9 @@ static void cp_tx_timeout(struct net_device *dev)
 	unsigned long flags;
 	int rc;
 
-	pr_warning("%s: Transmit timeout, status %2x %4x %4x %4x\n",
-	       dev->name, cpr8(Cmd), cpr16(CpCmd),
-	       cpr16(IntrStatus), cpr16(IntrMask));
+	netdev_warn(dev, "Transmit timeout, status %2x %4x %4x %4x\n",
+		    cpr8(Cmd), cpr16(CpCmd),
+		    cpr16(IntrStatus), cpr16(IntrMask));
 
 	spin_lock_irqsave(&cp->lock, flags);
 
@@ -1873,8 +1865,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
 		dev_info(&pdev->dev,
-			   "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip, use 8139too\n",
-		           pdev->vendor, pdev->device, pdev->revision);
+			 "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip, use 8139too\n",
+			 pdev->vendor, pdev->device, pdev->revision);
 		return -ENODEV;
 	}
 
@@ -1932,14 +1924,13 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
-				   "No usable DMA configuration, aborting.\n");
+				"No usable DMA configuration, aborting\n");
 			goto err_out_res;
 		}
 		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
-				   "No usable consistent DMA configuration, "
-			           "aborting.\n");
+				"No usable consistent DMA configuration, aborting\n");
 			goto err_out_res;
 		}
 	}
@@ -1951,7 +1942,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!regs) {
 		rc = -EIO;
 		dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
-		       (unsigned long long)pci_resource_len(pdev, 1),
+			(unsigned long long)pci_resource_len(pdev, 1),
 		       (unsigned long long)pciaddr);
 		goto err_out_res;
 	}
@@ -1989,11 +1980,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto err_out_iomap;
 
-	pr_info("%s: RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
-		dev->name,
-		dev->base_addr,
-		dev->dev_addr,
-		dev->irq);
+	netdev_info(dev, "RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
+		    dev->base_addr, dev->dev_addr, dev->irq);
 
 	pci_set_drvdata(pdev, dev);
 
-- 
cgit v1.2.3


From 497159aff6c81b61fe88463a64e7dad6f86297e3 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:49 +0000
Subject: drivers/net/8139too.c: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Convert formats like %8.8 to %08
Remove periods from formats
Coalesce long formats
Use print_hex_dump

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/8139too.c | 187 ++++++++++++++++++++++----------------------------
 1 file changed, 81 insertions(+), 106 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index c7d6f094cc7a..b4efc913978b 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -89,6 +89,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"8139too"
 #define DRV_VERSION	"0.9.28"
 
@@ -111,7 +113,6 @@
 #include <asm/irq.h>
 
 #define RTL8139_DRIVER_NAME   DRV_NAME " Fast Ethernet driver " DRV_VERSION
-#define PFX DRV_NAME ": "
 
 /* Default Message level */
 #define RTL8139_DEF_MSG_ENABLE   (NETIF_MSG_DRV   | \
@@ -130,9 +131,9 @@
 #  define assert(expr) do {} while (0)
 #else
 #  define assert(expr) \
-        if(unlikely(!(expr))) {				        \
-        pr_err("Assertion failed! %s,%s,%s,line=%d\n",	\
-	#expr, __FILE__, __func__, __LINE__);			\
+        if (unlikely(!(expr))) {				\
+		pr_err("Assertion failed! %s,%s,%s,line=%d\n",	\
+		       #expr, __FILE__, __func__, __LINE__);	\
         }
 #endif
 
@@ -957,7 +958,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
 	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
 	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
-		pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+		pr_info("OQO Model 2 detected. Forcing PIO\n");
 		use_io = 1;
 	}
 
@@ -1010,21 +1011,19 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	tp->mii.reg_num_mask = 0x1f;
 
 	/* dev is fully set up and ready to use now */
-	pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+	pr_debug("about to register device named %s (%p)...\n",
+		 dev->name, dev);
 	i = register_netdev (dev);
 	if (i) goto err_out;
 
 	pci_set_drvdata (pdev, dev);
 
-	pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
-		dev->name,
-		board_info[ent->driver_data].name,
-		dev->base_addr,
-		dev->dev_addr,
-		dev->irq);
+	netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+		    board_info[ent->driver_data].name,
+		    dev->base_addr, dev->dev_addr, dev->irq);
 
-	pr_debug("%s:  Identified 8139 chip type '%s'\n",
-		dev->name, rtl_chip_info[tp->chipset].name);
+	netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
+		   rtl_chip_info[tp->chipset].name);
 
 	/* Find the connected MII xcvrs.
 	   Doing this in open() would allow detecting external xcvrs later, but
@@ -1037,13 +1036,12 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 				u16 advertising = mdio_read(dev, phy, 4);
 				tp->phys[phy_idx++] = phy;
-				pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
-					   dev->name, phy, mii_status, advertising);
+				netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
+					    phy, mii_status, advertising);
 			}
 		}
 		if (phy_idx == 0) {
-			pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
-				   dev->name);
+			netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
 			tp->phys[0] = 32;
 		}
 	} else
@@ -1062,15 +1060,15 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
 		tp->mii.full_duplex = full_duplex[board_idx];
 	if (tp->mii.full_duplex) {
-		pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+		netdev_info(dev, "Media type forced to Full Duplex\n");
 		/* Changing the MII-advertised media because might prevent
 		   re-connection. */
 		tp->mii.force_media = 1;
 	}
 	if (tp->default_port) {
-		pr_info("  Forcing %dMbps %s-duplex operation.\n",
-			   (option & 0x20 ? 100 : 10),
-			   (option & 0x10 ? "full" : "half"));
+		netdev_info(dev, "  Forcing %dMbps %s-duplex operation\n",
+			    (option & 0x20 ? 100 : 10),
+			    (option & 0x10 ? "full" : "half"));
 		mdio_write(dev, tp->phys[0], 0,
 				   ((option & 0x20) ? 0x2000 : 0) | 	/* 100Mbps? */
 				   ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
@@ -1330,12 +1328,12 @@ static int rtl8139_open (struct net_device *dev)
 	rtl8139_hw_start (dev);
 	netif_start_queue (dev);
 
-	if (netif_msg_ifup(tp))
-		pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
-			" GP Pins %2.2x %s-duplex.\n", dev->name,
-			(unsigned long long)pci_resource_start (tp->pci_dev, 1),
-			dev->irq, RTL_R8 (MediaStatus),
-			tp->mii.full_duplex ? "full" : "half");
+	netif_dbg(tp, ifup, dev,
+		  "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
+		  __func__,
+		  (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+		  dev->irq, RTL_R8 (MediaStatus),
+		  tp->mii.full_duplex ? "full" : "half");
 
 	rtl8139_start_thread(tp);
 
@@ -1393,7 +1391,7 @@ static void rtl8139_hw_start (struct net_device *dev)
 		RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
 	}
 
-	pr_debug("init buffer addresses\n");
+	netdev_dbg(dev, "init buffer addresses\n");
 
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1555,14 +1553,11 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
 			tp->mii.full_duplex = duplex;
 
 			if (mii_lpa) {
-				pr_info("%s: Setting %s-duplex based on MII #%d link"
-					" partner ability of %4.4x.\n",
-					dev->name,
-					tp->mii.full_duplex ? "full" : "half",
-					tp->phys[0], mii_lpa);
+				netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
+					    tp->mii.full_duplex ? "full" : "half",
+					    tp->phys[0], mii_lpa);
 			} else {
-				pr_info("%s: media is unconnected, link down, or incompatible connection\n",
-				       dev->name);
+				netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
 			}
 #if 0
 			RTL_W8 (Cfg9346, Cfg9346_Unlock);
@@ -1576,13 +1571,12 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
 
 	rtl8139_tune_twister (dev, tp);
 
-	pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
-		 dev->name, RTL_R16 (NWayLPAR));
-	pr_debug("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
-		 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
-	pr_debug("%s:  Chip config %2.2x %2.2x.\n",
-		 dev->name, RTL_R8 (Config0),
-		 RTL_R8 (Config1));
+	netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
+		   RTL_R16(NWayLPAR));
+	netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
+		   RTL_R16(IntrMask), RTL_R16(IntrStatus));
+	netdev_dbg(dev, "Chip config %02x %02x\n",
+		   RTL_R8(Config0), RTL_R8(Config1));
 }
 
 static void rtl8139_thread (struct work_struct *work)
@@ -1640,17 +1634,17 @@ static void rtl8139_tx_timeout_task (struct work_struct *work)
 	int i;
 	u8 tmp8;
 
-	pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
-		dev->name, RTL_R8 (ChipCmd),
-		RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+	netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
+		   RTL_R8(ChipCmd), RTL_R16(IntrStatus),
+		   RTL_R16(IntrMask), RTL_R8(MediaStatus));
 	/* Emit info to figure out what went wrong. */
-	pr_debug("%s: Tx queue start entry %ld  dirty entry %ld.\n",
-		dev->name, tp->cur_tx, tp->dirty_tx);
+	netdev_dbg(dev, "Tx queue start entry %ld  dirty entry %ld\n",
+		   tp->cur_tx, tp->dirty_tx);
 	for (i = 0; i < NUM_TX_DESC; i++)
-		pr_debug("%s:  Tx descriptor %d is %8.8lx.%s\n",
-			dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
-			i == tp->dirty_tx % NUM_TX_DESC ?
-				" (queue head)" : "");
+		netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
+			   i, RTL_R32(TxStatus0 + (i * 4)),
+			   i == tp->dirty_tx % NUM_TX_DESC ?
+			   " (queue head)" : "");
 
 	tp->xstats.tx_timeouts++;
 
@@ -1729,9 +1723,8 @@ static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
 		netif_stop_queue (dev);
 	spin_unlock_irqrestore(&tp->lock, flags);
 
-	if (netif_msg_tx_queued(tp))
-		pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
-			dev->name, len, entry);
+	netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
+		  len, entry);
 
 	return NETDEV_TX_OK;
 }
@@ -1760,9 +1753,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
 		/* Note: TxCarrierLost is always asserted at 100mbps. */
 		if (txstatus & (TxOutOfWindow | TxAborted)) {
 			/* There was an major error, log it. */
-			if (netif_msg_tx_err(tp))
-				pr_debug("%s: Transmit error, Tx status %8.8x.\n",
-					dev->name, txstatus);
+			netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
+				  txstatus);
 			dev->stats.tx_errors++;
 			if (txstatus & TxAborted) {
 				dev->stats.tx_aborted_errors++;
@@ -1792,8 +1784,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
 
 #ifndef RTL8139_NDEBUG
 	if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
-		pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
-		        dev->name, dirty_tx, tp->cur_tx);
+		netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
+			   dirty_tx, tp->cur_tx);
 		dirty_tx += NUM_TX_DESC;
 	}
 #endif /* RTL8139_NDEBUG */
@@ -1816,14 +1808,13 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 	int tmp_work;
 #endif
 
-	if (netif_msg_rx_err (tp))
-		pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
-			dev->name, rx_status);
+	netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
+		  rx_status);
 	dev->stats.rx_errors++;
 	if (!(rx_status & RxStatusOK)) {
 		if (rx_status & RxTooLong) {
-			pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
-			 	dev->name, rx_status);
+			netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
+				   rx_status);
 			/* A.C.: The chip hangs here. */
 		}
 		if (rx_status & (RxBadSymbol | RxBadAlign))
@@ -1855,7 +1846,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 			break;
 	}
 	if (tmp_work <= 0)
-		pr_warning(PFX "rx stop wait too long\n");
+		netdev_warn(dev, "rx stop wait too long\n");
 	/* restart receive */
 	tmp_work = 200;
 	while (--tmp_work > 0) {
@@ -1866,7 +1857,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 			break;
 	}
 	if (tmp_work <= 0)
-		pr_warning(PFX "tx/rx enable wait too long\n");
+		netdev_warn(dev, "tx/rx enable wait too long\n");
 
 	/* and reinitialize all rx related registers */
 	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
@@ -1877,7 +1868,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 	RTL_W32 (RxConfig, tp->rx_config);
 	tp->cur_rx = 0;
 
-	pr_debug("init buffer addresses\n");
+	netdev_dbg(dev, "init buffer addresses\n");
 
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1931,10 +1922,9 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 	unsigned int cur_rx = tp->cur_rx;
 	unsigned int rx_size = 0;
 
-	pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
-		 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
-		 RTL_R16 (RxBufAddr),
-		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+	netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+		   __func__, (u16)cur_rx,
+		   RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
 
 	while (netif_running(dev) && received < budget &&
 	       (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
@@ -1950,19 +1940,12 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 		rx_size = rx_status >> 16;
 		pkt_size = rx_size - 4;
 
-		if (netif_msg_rx_status(tp))
-			pr_debug("%s:  rtl8139_rx() status %4.4x, size %4.4x,"
-				" cur %4.4x.\n", dev->name, rx_status,
-			 rx_size, cur_rx);
+		netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
+			  __func__, rx_status, rx_size, cur_rx);
 #if RTL8139_DEBUG > 2
-		{
-			int i;
-			pr_debug("%s: Frame contents ", dev->name);
-			for (i = 0; i < 70; i++)
-				pr_cont(" %2.2x",
-					rx_ring[ring_offset + i]);
-			pr_cont(".\n");
-		}
+		print_dump_hex(KERN_DEBUG, "Frame contents: ",
+			       DUMP_PREFIX_OFFSET, 16, 1,
+			       &rx_ring[ring_offset], 70, true);
 #endif
 
 		/* Packet copy from FIFO still in progress.
@@ -1973,14 +1956,11 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 			if (!tp->fifo_copy_timeout)
 				tp->fifo_copy_timeout = jiffies + 2;
 			else if (time_after(jiffies, tp->fifo_copy_timeout)) {
-				pr_debug("%s: hung FIFO. Reset.", dev->name);
+				netdev_dbg(dev, "hung FIFO. Reset\n");
 				rx_size = 0;
 				goto no_early_rx;
 			}
-			if (netif_msg_intr(tp)) {
-				pr_debug("%s: fifo copy in progress.",
-				       dev->name);
-			}
+			netif_dbg(tp, intr, dev, "fifo copy in progress\n");
 			tp->xstats.early_rx++;
 			break;
 		}
@@ -2021,8 +2001,7 @@ no_early_rx:
 			netif_receive_skb (skb);
 		} else {
 			if (net_ratelimit())
-				pr_warning("%s: Memory squeeze, dropping packet.\n",
-					dev->name);
+				netdev_warn(dev, "Memory squeeze, dropping packet\n");
 			dev->stats.rx_dropped++;
 		}
 		received++;
@@ -2036,10 +2015,9 @@ no_early_rx:
 	if (unlikely(!received || rx_size == 0xfff0))
 		rtl8139_isr_ack(tp);
 
-	pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
-		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
-		 RTL_R16 (RxBufAddr),
-		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+	netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+		   __func__, cur_rx,
+		   RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
 
 	tp->cur_rx = cur_rx;
 
@@ -2060,8 +2038,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
 				     void __iomem *ioaddr,
 				     int status, int link_changed)
 {
-	pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
-		 dev->name, status);
+	netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
 
 	assert (dev != NULL);
 	assert (tp != NULL);
@@ -2089,8 +2066,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
 		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
 		pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
 
-		pr_err("%s: PCI Bus error %4.4x.\n",
-			dev->name, pci_cmd_status);
+		netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
 	}
 }
 
@@ -2183,8 +2159,8 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
  out:
 	spin_unlock (&tp->lock);
 
-	pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
-		 dev->name, RTL_R16 (IntrStatus));
+	netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
+		   RTL_R16(IntrStatus));
 	return IRQ_RETVAL(handled);
 }
 
@@ -2233,9 +2209,8 @@ static int rtl8139_close (struct net_device *dev)
 	netif_stop_queue(dev);
 	napi_disable(&tp->napi);
 
-	if (netif_msg_ifdown(tp))
-		pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
-			dev->name, RTL_R16 (IntrStatus));
+	netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
+		  RTL_R16(IntrStatus));
 
 	spin_lock_irqsave (&tp->lock, flags);
 
@@ -2512,8 +2487,8 @@ static void __set_rx_mode (struct net_device *dev)
 	int rx_mode;
 	u32 tmp;
 
-	pr_debug("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
-			dev->name, dev->flags, RTL_R32 (RxConfig));
+	netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08lx\n",
+		   dev->flags, RTL_R32(RxConfig));
 
 	/* Note: do not reorder, GCC is clever about common statements. */
 	if (dev->flags & IFF_PROMISC) {
-- 
cgit v1.2.3


From 2fc96fff4483971aa81795382c368ea7d8100dde Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:50 +0000
Subject: drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/b44.c | 72 ++++++++++++++++++++++++-------------------------------
 1 file changed, 31 insertions(+), 41 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index f21cbe63c7b1..180510ed92a5 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -10,6 +10,8 @@
  * Distribute under GPL.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -34,7 +36,6 @@
 #include "b44.h"
 
 #define DRV_MODULE_NAME		"b44"
-#define PFX DRV_MODULE_NAME	": "
 #define DRV_MODULE_VERSION	"2.0"
 
 #define B44_DEF_MSG_ENABLE	  \
@@ -190,12 +191,9 @@ static int b44_wait_bit(struct b44 *bp, unsigned long reg,
 	}
 	if (i == timeout) {
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: BUG!  Timeout waiting for bit "
-			       "%08x of register "
-			       "%lx to %s.\n",
-			       bp->dev->name,
-			       bit, reg,
-			       (clear ? "clear" : "set"));
+			netdev_err(bp->dev, "BUG!  Timeout waiting for bit %08x of register %lx to %s\n",
+				   bit, reg, clear ? "clear" : "set");
+
 		return -ENODEV;
 	}
 	return 0;
@@ -335,8 +333,7 @@ static int b44_phy_reset(struct b44 *bp)
 	err = b44_readphy(bp, MII_BMCR, &val);
 	if (!err) {
 		if (val & BMCR_RESET) {
-			printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
-			       bp->dev->name);
+			netdev_err(bp->dev, "PHY Reset would not complete\n");
 			err = -ENODEV;
 		}
 	}
@@ -415,7 +412,7 @@ static void b44_wap54g10_workaround(struct b44 *bp)
 	}
 	return;
 error:
-	printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
+	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
 }
 #else
 static inline void b44_wap54g10_workaround(struct b44 *bp)
@@ -508,18 +505,15 @@ static void b44_stats_update(struct b44 *bp)
 static void b44_link_report(struct b44 *bp)
 {
 	if (!netif_carrier_ok(bp->dev)) {
-		printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
+		netdev_info(bp->dev, "Link is down\n");
 	} else {
-		printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
-		       bp->dev->name,
-		       (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
-		       (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
-
-		printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
-		       "%s for RX.\n",
-		       bp->dev->name,
-		       (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
-		       (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
+		netdev_info(bp->dev, "Link is up at %d Mbps, %s duplex\n",
+			    (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
+			    (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
+
+		netdev_info(bp->dev, "Flow control is %s for TX and %s for RX\n",
+			    (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
+			    (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
 	}
 }
 
@@ -578,11 +572,9 @@ static void b44_check_phy(struct b44 *bp)
 		}
 
 		if (bmsr & BMSR_RFAULT)
-			printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
-			       bp->dev->name);
+			netdev_warn(bp->dev, "Remote fault detected in PHY\n");
 		if (bmsr & BMSR_JCD)
-			printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
-			       bp->dev->name);
+			netdev_warn(bp->dev, "Jabber detected in PHY\n");
 	}
 }
 
@@ -903,7 +895,7 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id)
 		handled = 1;
 
 		if (unlikely(!netif_running(dev))) {
-			printk(KERN_INFO "%s: late interrupt.\n", dev->name);
+			netdev_info(dev, "late interrupt\n");
 			goto irq_ack;
 		}
 
@@ -928,8 +920,7 @@ static void b44_tx_timeout(struct net_device *dev)
 {
 	struct b44 *bp = netdev_priv(dev);
 
-	printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
-	       dev->name);
+	netdev_err(dev, "transmit timed out, resetting\n");
 
 	spin_lock_irq(&bp->lock);
 
@@ -958,8 +949,7 @@ static netdev_tx_t b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* This is a hard error, log it. */
 	if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
 		netif_stop_queue(dev);
-		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
-		       dev->name);
+		netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
 		goto err_out;
 	}
 
@@ -1335,7 +1325,7 @@ static void b44_halt(struct b44 *bp)
 	/* reset PHY */
 	b44_phy_reset(bp);
 	/* power down PHY */
-	printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name);
+	netdev_info(bp->dev, "powering down PHY\n");
 	bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
 	/* now reset the chip, but without enabling the MAC&PHY
 	 * part of it. This has to be done _after_ we shut down the PHY */
@@ -1526,7 +1516,7 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 
 	pwol_pattern = kzalloc(B44_PATTERN_SIZE, GFP_KERNEL);
 	if (!pwol_pattern) {
-		printk(KERN_ERR PFX "Memory not available for WOL\n");
+		pr_err("Memory not available for WOL\n");
 		return;
 	}
 
@@ -2099,7 +2089,7 @@ static int __devinit b44_get_invariants(struct b44 *bp)
 	memcpy(bp->dev->dev_addr, addr, 6);
 
 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
-		printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
+		pr_err("Invalid MAC address found in EEPROM\n");
 		return -EINVAL;
 	}
 
@@ -2144,12 +2134,12 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 	instance++;
 
 	if (b44_version_printed++ == 0)
-		printk(KERN_INFO "%s", version);
+		pr_info("%s", version);
 
 
 	dev = alloc_etherdev(sizeof(*bp));
 	if (!dev) {
-		dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n");
+		dev_err(sdev->dev, "Etherdev alloc failed, aborting\n");
 		err = -ENOMEM;
 		goto out;
 	}
@@ -2188,13 +2178,13 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 	err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
 	if (err) {
 		dev_err(sdev->dev,
-			"Required 30BIT DMA mask unsupported by the system.\n");
+			"Required 30BIT DMA mask unsupported by the system\n");
 		goto err_out_powerdown;
 	}
 	err = b44_get_invariants(bp);
 	if (err) {
 		dev_err(sdev->dev,
-			"Problem fetching invariants of chip, aborting.\n");
+			"Problem fetching invariants of chip, aborting\n");
 		goto err_out_powerdown;
 	}
 
@@ -2214,7 +2204,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 
 	err = register_netdev(dev);
 	if (err) {
-		dev_err(sdev->dev, "Cannot register net device, aborting.\n");
+		dev_err(sdev->dev, "Cannot register net device, aborting\n");
 		goto err_out_powerdown;
 	}
 
@@ -2225,8 +2215,8 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 	 */
 	b44_chip_reset(bp, B44_CHIP_RESET_FULL);
 
-	printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
-	       dev->name, dev->dev_addr);
+	netdev_info(dev, "Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
+		    dev->dev_addr);
 
 	return 0;
 
@@ -2299,7 +2289,7 @@ static int b44_resume(struct ssb_device *sdev)
 
 	rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
 	if (rc) {
-		printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+		netdev_err(dev, "request_irq failed\n");
 		return rc;
 	}
 
-- 
cgit v1.2.3


From 3a9c6a4915e584663aebdb9016bcb9d3897dd779 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:51 +0000
Subject: drivers/net/bnx2.c: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Coalesce some printks

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 145 ++++++++++++++++++++++-------------------------------
 1 file changed, 61 insertions(+), 84 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5f0dda10f20d..a6cc9d02e589 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -9,6 +9,7 @@
  * Written by: Michael Chan  (mchan@broadcom.com)
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -57,7 +58,6 @@
 #include "bnx2_fw.h"
 
 #define DRV_MODULE_NAME		"bnx2"
-#define PFX DRV_MODULE_NAME	": "
 #define DRV_MODULE_VERSION	"2.0.8"
 #define DRV_MODULE_RELDATE	"Feb 15, 2010"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-5.0.0.j6.fw"
@@ -979,33 +979,27 @@ bnx2_report_link(struct bnx2 *bp)
 {
 	if (bp->link_up) {
 		netif_carrier_on(bp->dev);
-		printk(KERN_INFO PFX "%s NIC %s Link is Up, ", bp->dev->name,
-		       bnx2_xceiver_str(bp));
-
-		printk("%d Mbps ", bp->line_speed);
-
-		if (bp->duplex == DUPLEX_FULL)
-			printk("full duplex");
-		else
-			printk("half duplex");
+		netdev_info(bp->dev, "NIC %s Link is Up, %d Mbps %s duplex",
+			    bnx2_xceiver_str(bp),
+			    bp->line_speed,
+			    bp->duplex == DUPLEX_FULL ? "full" : "half");
 
 		if (bp->flow_ctrl) {
 			if (bp->flow_ctrl & FLOW_CTRL_RX) {
-				printk(", receive ");
+				pr_cont(", receive ");
 				if (bp->flow_ctrl & FLOW_CTRL_TX)
-					printk("& transmit ");
+					pr_cont("& transmit ");
 			}
 			else {
-				printk(", transmit ");
+				pr_cont(", transmit ");
 			}
-			printk("flow control ON");
+			pr_cont("flow control ON");
 		}
-		printk("\n");
-	}
-	else {
+		pr_cont("\n");
+	} else {
 		netif_carrier_off(bp->dev);
-		printk(KERN_ERR PFX "%s NIC %s Link is Down\n", bp->dev->name,
-		       bnx2_xceiver_str(bp));
+		netdev_err(bp->dev, "NIC %s Link is Down\n",
+			   bnx2_xceiver_str(bp));
 	}
 
 	bnx2_report_fw_link(bp);
@@ -2482,8 +2476,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
 	/* If we timed out, inform the firmware that this is the case. */
 	if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) {
 		if (!silent)
-			printk(KERN_ERR PFX "fw sync timeout, reset code = "
-					    "%x\n", msg_data);
+			pr_err("fw sync timeout, reset code = %x\n", msg_data);
 
 		msg_data &= ~BNX2_DRV_MSG_CODE;
 		msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
@@ -2599,8 +2592,7 @@ bnx2_alloc_bad_rbuf(struct bnx2 *bp)
 
 	good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL);
 	if (good_mbuf == NULL) {
-		printk(KERN_ERR PFX "Failed to allocate memory in "
-				    "bnx2_alloc_bad_rbuf\n");
+		pr_err("Failed to allocate memory in %s\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -3656,15 +3648,13 @@ bnx2_request_firmware(struct bnx2 *bp)
 
 	rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev);
 	if (rc) {
-		printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
-		       mips_fw_file);
+		pr_err("Can't load firmware file \"%s\"\n", mips_fw_file);
 		return rc;
 	}
 
 	rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev);
 	if (rc) {
-		printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
-		       rv2p_fw_file);
+		pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file);
 		return rc;
 	}
 	mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
@@ -3675,15 +3665,13 @@ bnx2_request_firmware(struct bnx2 *bp)
 	    check_mips_fw_entry(bp->mips_firmware, &mips_fw->rxp) ||
 	    check_mips_fw_entry(bp->mips_firmware, &mips_fw->tpat) ||
 	    check_mips_fw_entry(bp->mips_firmware, &mips_fw->txp)) {
-		printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
-		       mips_fw_file);
+		pr_err("Firmware file \"%s\" is invalid\n", mips_fw_file);
 		return -EINVAL;
 	}
 	if (bp->rv2p_firmware->size < sizeof(*rv2p_fw) ||
 	    check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc1.rv2p, 8, true) ||
 	    check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc2.rv2p, 8, true)) {
-		printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
-		       rv2p_fw_file);
+		pr_err("Firmware file \"%s\" is invalid\n", rv2p_fw_file);
 		return -EINVAL;
 	}
 
@@ -4317,7 +4305,7 @@ bnx2_init_nvram(struct bnx2 *bp)
 
 	if (j == entry_count) {
 		bp->flash_info = NULL;
-		printk(KERN_ALERT PFX "Unknown flash/EEPROM type.\n");
+		pr_alert("Unknown flash/EEPROM type\n");
 		return -ENODEV;
 	}
 
@@ -4737,7 +4725,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 
 		if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
 			   BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
-			printk(KERN_ERR PFX "Chip reset did not complete\n");
+			pr_err("Chip reset did not complete\n");
 			return -EBUSY;
 		}
 	}
@@ -4745,7 +4733,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 	/* Make sure byte swapping is properly configured. */
 	val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0);
 	if (val != 0x01020304) {
-		printk(KERN_ERR PFX "Chip not in correct endian mode\n");
+		pr_err("Chip not in correct endian mode\n");
 		return -ENODEV;
 	}
 
@@ -5166,9 +5154,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num)
 	ring_prod = prod = rxr->rx_pg_prod;
 	for (i = 0; i < bp->rx_pg_ring_size; i++) {
 		if (bnx2_alloc_rx_page(bp, rxr, ring_prod) < 0) {
-			printk(KERN_WARNING PFX "%s: init'ed rx page ring %d "
-						"with %d/%d pages only\n",
-			       bp->dev->name, ring_num, i, bp->rx_pg_ring_size);
+			netdev_warn(bp->dev, "init'ed rx page ring %d with %d/%d pages only\n",
+				    ring_num, i, bp->rx_pg_ring_size);
 			break;
 		}
 		prod = NEXT_RX_BD(prod);
@@ -5179,9 +5166,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num)
 	ring_prod = prod = rxr->rx_prod;
 	for (i = 0; i < bp->rx_ring_size; i++) {
 		if (bnx2_alloc_rx_skb(bp, rxr, ring_prod) < 0) {
-			printk(KERN_WARNING PFX "%s: init'ed rx ring %d with "
-						"%d/%d skbs only\n",
-			       bp->dev->name, ring_num, i, bp->rx_ring_size);
+			netdev_warn(bp->dev, "init'ed rx ring %d with %d/%d skbs only\n",
+				    ring_num, i, bp->rx_ring_size);
 			break;
 		}
 		prod = NEXT_RX_BD(prod);
@@ -6239,11 +6225,7 @@ bnx2_open(struct net_device *dev)
 		 * If MSI test fails, go back to INTx mode
 		 */
 		if (bnx2_test_intr(bp) != 0) {
-			printk(KERN_WARNING PFX "%s: No interrupt was generated"
-			       " using MSI, switching to INTx mode. Please"
-			       " report this failure to the PCI maintainer"
-			       " and include system chipset information.\n",
-			       bp->dev->name);
+			netdev_warn(bp->dev, "No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.\n");
 
 			bnx2_disable_int(bp);
 			bnx2_free_irq(bp);
@@ -6263,9 +6245,9 @@ bnx2_open(struct net_device *dev)
 		}
 	}
 	if (bp->flags & BNX2_FLAG_USING_MSI)
-		printk(KERN_INFO PFX "%s: using MSI\n", dev->name);
+		netdev_info(dev, "using MSI\n");
 	else if (bp->flags & BNX2_FLAG_USING_MSIX)
-		printk(KERN_INFO PFX "%s: using MSIX\n", dev->name);
+		netdev_info(dev, "using MSIX\n");
 
 	netif_tx_start_all_queues(dev);
 
@@ -6304,20 +6286,18 @@ bnx2_dump_state(struct bnx2 *bp)
 {
 	struct net_device *dev = bp->dev;
 
-	printk(KERN_ERR PFX "%s DEBUG: intr_sem[%x]\n", dev->name,
-		atomic_read(&bp->intr_sem));
-	printk(KERN_ERR PFX "%s DEBUG: EMAC_TX_STATUS[%08x] "
-			    "RPM_MGMT_PKT_CTRL[%08x]\n", dev->name,
-		REG_RD(bp, BNX2_EMAC_TX_STATUS),
-		REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
-	printk(KERN_ERR PFX "%s DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
-		dev->name, bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
-		bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
-	printk(KERN_ERR PFX "%s DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
-		dev->name, REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
+	netdev_err(dev, "DEBUG: intr_sem[%x]\n", atomic_read(&bp->intr_sem));
+	netdev_err(dev, "DEBUG: EMAC_TX_STATUS[%08x] RPM_MGMT_PKT_CTRL[%08x]\n",
+		   REG_RD(bp, BNX2_EMAC_TX_STATUS),
+		   REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
+	netdev_err(dev, "DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
+		   bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
+		   bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
+	netdev_err(dev, "DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
+		   REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
 	if (bp->flags & BNX2_FLAG_USING_MSIX)
-		printk(KERN_ERR PFX "%s DEBUG: PBA[%08x]\n", dev->name,
-			REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
+		netdev_err(dev, "DEBUG: PBA[%08x]\n",
+			   REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
 }
 
 static void
@@ -6381,8 +6361,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(bnx2_tx_avail(bp, txr) <
 	    (skb_shinfo(skb)->nr_frags + 1))) {
 		netif_tx_stop_queue(txq);
-		printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n",
-			dev->name);
+		netdev_err(dev, "BUG! Tx ring full when queue awake!\n");
 
 		return NETDEV_TX_BUSY;
 	}
@@ -7869,20 +7848,20 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	/* enable device (incl. PCI PM wakeup), and bus-mastering */
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
+		dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
 		goto err_out;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
 		dev_err(&pdev->dev,
-			"Cannot find PCI device base address, aborting.\n");
+			"Cannot find PCI device base address, aborting\n");
 		rc = -ENODEV;
 		goto err_out_disable;
 	}
 
 	rc = pci_request_regions(pdev, DRV_MODULE_NAME);
 	if (rc) {
-		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
 		goto err_out_disable;
 	}
 
@@ -7892,7 +7871,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (bp->pm_cap == 0) {
 		dev_err(&pdev->dev,
-			"Cannot find power management capability, aborting.\n");
+			"Cannot find power management capability, aborting\n");
 		rc = -EIO;
 		goto err_out_release;
 	}
@@ -7915,7 +7894,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->regview = ioremap_nocache(dev->base_addr, mem_len);
 
 	if (!bp->regview) {
-		dev_err(&pdev->dev, "Cannot map register space, aborting.\n");
+		dev_err(&pdev->dev, "Cannot map register space, aborting\n");
 		rc = -ENOMEM;
 		goto err_out_release;
 	}
@@ -7935,7 +7914,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
 		if (pci_find_capability(pdev, PCI_CAP_ID_EXP) == 0) {
 			dev_err(&pdev->dev,
-				"Cannot find PCIE capability, aborting.\n");
+				"Cannot find PCIE capability, aborting\n");
 			rc = -EIO;
 			goto err_out_unmap;
 		}
@@ -7946,7 +7925,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
 		if (bp->pcix_cap == 0) {
 			dev_err(&pdev->dev,
-				"Cannot find PCIX capability, aborting.\n");
+				"Cannot find PCIX capability, aborting\n");
 			rc = -EIO;
 			goto err_out_unmap;
 		}
@@ -7975,11 +7954,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		rc = pci_set_consistent_dma_mask(pdev, persist_dma_mask);
 		if (rc) {
 			dev_err(&pdev->dev,
-				"pci_set_consistent_dma_mask failed, aborting.\n");
+				"pci_set_consistent_dma_mask failed, aborting\n");
 			goto err_out_unmap;
 		}
 	} else if ((rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
-		dev_err(&pdev->dev, "System does not support DMA, aborting.\n");
+		dev_err(&pdev->dev, "System does not support DMA, aborting\n");
 		goto err_out_unmap;
 	}
 
@@ -7996,7 +7975,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		!(bp->flags & BNX2_FLAG_PCIX)) {
 
 		dev_err(&pdev->dev,
-			"5706 A1 can only be used in a PCIX bus, aborting.\n");
+			"5706 A1 can only be used in a PCIX bus, aborting\n");
 		goto err_out_unmap;
 	}
 
@@ -8019,7 +7998,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 
 	if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
 	    BNX2_DEV_INFO_SIGNATURE_MAGIC) {
-		dev_err(&pdev->dev, "Firmware not running, aborting.\n");
+		dev_err(&pdev->dev, "Firmware not running, aborting\n");
 		rc = -ENODEV;
 		goto err_out_unmap;
 	}
@@ -8292,7 +8271,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	char str[40];
 
 	if (version_printed++ == 0)
-		printk(KERN_INFO "%s", version);
+		pr_info("%s", version);
 
 	/* dev zeroed in init_etherdev */
 	dev = alloc_etherdev_mq(sizeof(*bp), TX_MAX_RINGS);
@@ -8342,15 +8321,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto error;
 	}
 
-	printk(KERN_INFO "%s: %s (%c%d) %s found at mem %lx, "
-		"IRQ %d, node addr %pM\n",
-		dev->name,
-		board_info[ent->driver_data].name,
-		((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
-		((CHIP_ID(bp) & 0x0ff0) >> 4),
-		bnx2_bus_string(bp, str),
-		dev->base_addr,
-		bp->pdev->irq, dev->dev_addr);
+	netdev_info(dev, "%s (%c%d) %s found at mem %lx, IRQ %d, node addr %pM\n",
+		    board_info[ent->driver_data].name,
+		    ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
+		    ((CHIP_ID(bp) & 0x0ff0) >> 4),
+		    bnx2_bus_string(bp, str),
+		    dev->base_addr,
+		    bp->pdev->irq, dev->dev_addr);
 
 	return 0;
 
@@ -8485,7 +8462,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
 	rtnl_lock();
 	if (pci_enable_device(pdev)) {
 		dev_err(&pdev->dev,
-			"Cannot re-enable PCI device after reset.\n");
+			"Cannot re-enable PCI device after reset\n");
 		rtnl_unlock();
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
-- 
cgit v1.2.3


From 7995c64e5b56ec7fe6032e5fc586f726cde2152b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:52 +0000
Subject: drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h      |  49 ++++++++-----
 drivers/net/bnx2x_link.c |  21 ++----
 drivers/net/bnx2x_main.c | 185 +++++++++++++++++++++--------------------------
 3 files changed, 117 insertions(+), 138 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index d997d8472ee5..3c48a7a68308 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -44,7 +44,6 @@
 /* error/debug prints */
 
 #define DRV_MODULE_NAME		"bnx2x"
-#define PFX DRV_MODULE_NAME	": "
 
 /* for messages that are currently off */
 #define BNX2X_MSG_OFF			0
@@ -58,30 +57,40 @@
 #define DP_LEVEL			KERN_NOTICE	/* was: KERN_DEBUG */
 
 /* regular debug print */
-#define DP(__mask, __fmt, __args...) do { \
-	if (bp->msglevel & (__mask)) \
-		printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev ? (bp->dev->name) : "?", ##__args); \
-	} while (0)
+#define DP(__mask, __fmt, __args...)				\
+do {								\
+	if (bp->msg_enable & (__mask))				\
+		printk(DP_LEVEL "[%s:%d(%s)]" __fmt,		\
+		       __func__, __LINE__,			\
+		       bp->dev ? (bp->dev->name) : "?",		\
+		       ##__args);				\
+} while (0)
 
 /* errors debug print */
-#define BNX2X_DBG_ERR(__fmt, __args...) do { \
-	if (bp->msglevel & NETIF_MSG_PROBE) \
-		printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev ? (bp->dev->name) : "?", ##__args); \
-	} while (0)
+#define BNX2X_DBG_ERR(__fmt, __args...)				\
+do {								\
+	if (netif_msg_probe(bp))				\
+		pr_err("[%s:%d(%s)]" __fmt,			\
+		       __func__, __LINE__,			\
+		       bp->dev ? (bp->dev->name) : "?",		\
+		       ##__args);				\
+} while (0)
 
 /* for errors (never masked) */
-#define BNX2X_ERR(__fmt, __args...) do { \
-	printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-		bp->dev ? (bp->dev->name) : "?", ##__args); \
-	} while (0)
+#define BNX2X_ERR(__fmt, __args...)				\
+do {								\
+	pr_err("[%s:%d(%s)]" __fmt,				\
+	       __func__, __LINE__,				\
+	       bp->dev ? (bp->dev->name) : "?",			\
+	       ##__args);					\
+} while (0)
 
 /* before we have a dev->name use dev_info() */
-#define BNX2X_DEV_INFO(__fmt, __args...) do { \
-	if (bp->msglevel & NETIF_MSG_PROBE) \
-		dev_info(&bp->pdev->dev, __fmt, ##__args); \
-	} while (0)
+#define BNX2X_DEV_INFO(__fmt, __args...)			 \
+do {								 \
+	if (netif_msg_probe(bp))				 \
+		dev_info(&bp->pdev->dev, __fmt, ##__args);	 \
+} while (0)
 
 
 #ifdef BNX2X_STOP_ON_ERROR
@@ -882,7 +891,7 @@ struct bnx2x {
 	/* End of fields used in the performance code paths */
 
 	int			panic;
-	int			msglevel;
+	int			msg_enable;
 
 	u32			flags;
 #define PCIX_FLAG			1
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index cf5778919b4b..32e79c359e89 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -14,6 +14,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/pci.h>
@@ -2987,11 +2989,8 @@ static u8 bnx2x_verify_sfp_module(struct link_params *params)
 	else
 		vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0';
 
-	printk(KERN_INFO PFX  "Warning: "
-			 "Unqualified SFP+ module "
-			 "detected on %s, Port %d from %s part number %s\n"
-			, bp->dev->name, params->port,
-			vendor_name, vendor_pn);
+	netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected, Port %d from %s part number %s\n",
+		    params->port, vendor_name, vendor_pn);
 	return -EINVAL;
 }
 
@@ -4846,16 +4845,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 						     " has been detected on "
 						     "port %d\n",
 						 params->port);
-					printk(KERN_ERR PFX  "Error:  Power"
-						 " fault on %s Port %d has"
-						 " been detected and the"
-						 " power to that SFP+ module"
-						 " has been removed to prevent"
-						 " failure of the card. Please"
-						 " remove the SFP+ module and"
-						 " restart the system to clear"
-						 " this error.\n"
-			, bp->dev->name, params->port);
+					netdev_err(bp->dev, "Error:  Power fault on Port %d has been detected and the power to that SFP+ module has been removed to prevent failure of the card. Please remove the SFP+ module and restart the system to clear this error.\n",
+						   params->port);
 					/*
 					 * Disable all RX_ALARMs except for
 					 * mod_abs
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index a4e8460ff656..7f9db47e8cc3 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -514,24 +514,24 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
 
 	mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
 	mark = ((mark + 0x3) & ~0x3);
-	printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+	pr_err("begin fw dump (mark 0x%x)\n", mark);
 
-	printk(KERN_ERR PFX);
+	pr_err("");
 	for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
 		for (word = 0; word < 8; word++)
 			data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
 						  offset + 4*word));
 		data[8] = 0x0;
-		printk(KERN_CONT "%s", (char *)data);
+		pr_cont("%s", (char *)data);
 	}
 	for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) {
 		for (word = 0; word < 8; word++)
 			data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
 						  offset + 4*word));
 		data[8] = 0x0;
-		printk(KERN_CONT "%s", (char *)data);
+		pr_cont("%s", (char *)data);
 	}
-	printk(KERN_ERR PFX "end of fw dump\n");
+	pr_err("end of fw dump\n");
 }
 
 static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -2136,7 +2136,7 @@ static void bnx2x_link_report(struct bnx2x *bp)
 {
 	if (bp->flags & MF_FUNC_DIS) {
 		netif_carrier_off(bp->dev);
-		printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+		netdev_err(bp->dev, "NIC Link is Down\n");
 		return;
 	}
 
@@ -2145,7 +2145,7 @@ static void bnx2x_link_report(struct bnx2x *bp)
 
 		if (bp->state == BNX2X_STATE_OPEN)
 			netif_carrier_on(bp->dev);
-		printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
+		netdev_info(bp->dev, "NIC Link is Up, ");
 
 		line_speed = bp->link_vars.line_speed;
 		if (IS_E1HMF(bp)) {
@@ -2157,29 +2157,29 @@ static void bnx2x_link_report(struct bnx2x *bp)
 			if (vn_max_rate < line_speed)
 				line_speed = vn_max_rate;
 		}
-		printk("%d Mbps ", line_speed);
+		pr_cont("%d Mbps ", line_speed);
 
 		if (bp->link_vars.duplex == DUPLEX_FULL)
-			printk("full duplex");
+			pr_cont("full duplex");
 		else
-			printk("half duplex");
+			pr_cont("half duplex");
 
 		if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
 			if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
-				printk(", receive ");
+				pr_cont(", receive ");
 				if (bp->link_vars.flow_ctrl &
 				    BNX2X_FLOW_CTRL_TX)
-					printk("& transmit ");
+					pr_cont("& transmit ");
 			} else {
-				printk(", transmit ");
+				pr_cont(", transmit ");
 			}
-			printk("flow control ON");
+			pr_cont("flow control ON");
 		}
-		printk("\n");
+		pr_cont("\n");
 
 	} else { /* link_down */
 		netif_carrier_off(bp->dev);
-		printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+		netdev_err(bp->dev, "NIC Link is Down\n");
 	}
 }
 
@@ -2898,10 +2898,8 @@ static inline void bnx2x_fan_failure(struct bnx2x *bp)
 		 bp->link_params.ext_phy_config);
 
 	/* log the failure */
-	printk(KERN_ERR PFX "Fan Failure on Network Controller %s has caused"
-	       " the driver to shutdown the card to prevent permanent"
-	       " damage.  Please contact Dell Support for assistance\n",
-	       bp->dev->name);
+	netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
+		   "Please contact Dell Support for assistance.\n");
 }
 
 static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
@@ -4296,7 +4294,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 	bnx2x_net_stats_update(bp);
 	bnx2x_drv_stats_update(bp);
 
-	if (bp->msglevel & NETIF_MSG_TIMER) {
+	if (netif_msg_timer(bp)) {
 		struct bnx2x_fastpath *fp0_rx = bp->fp;
 		struct bnx2x_fastpath *fp0_tx = bp->fp;
 		struct tstorm_per_client_stats *old_tclient =
@@ -4306,7 +4304,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 		struct net_device_stats *nstats = &bp->dev->stats;
 		int i;
 
-		printk(KERN_DEBUG "%s:\n", bp->dev->name);
+		netdev_printk(KERN_DEBUG, bp->dev, "\n");
 		printk(KERN_DEBUG "  tx avail (%4x)  tx hc idx (%x)"
 				  "  tx pkt (%lx)\n",
 		       bnx2x_tx_avail(fp0_tx),
@@ -4464,7 +4462,7 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
 	/* Make sure the state has been "changed" */
 	smp_wmb();
 
-	if ((event != STATS_EVENT_UPDATE) || (bp->msglevel & NETIF_MSG_TIMER))
+	if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
 		DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
 		   state, event, bp->stats_state);
 }
@@ -5674,8 +5672,7 @@ gunzip_nomem2:
 	bp->gunzip_buf = NULL;
 
 gunzip_nomem1:
-	printk(KERN_ERR PFX "%s: Cannot allocate firmware buffer for"
-	       " un-compression\n", bp->dev->name);
+	netdev_err(bp->dev, "Cannot allocate firmware buffer for un-compression\n");
 	return -ENOMEM;
 }
 
@@ -5721,14 +5718,13 @@ static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
 
 	rc = zlib_inflate(bp->strm, Z_FINISH);
 	if ((rc != Z_OK) && (rc != Z_STREAM_END))
-		printk(KERN_ERR PFX "%s: Firmware decompression error: %s\n",
-		       bp->dev->name, bp->strm->msg);
+		netdev_err(bp->dev, "Firmware decompression error: %s\n",
+			   bp->strm->msg);
 
 	bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
 	if (bp->gunzip_outlen & 0x3)
-		printk(KERN_ERR PFX "%s: Firmware decompression error:"
-				    " gunzip_outlen (%d) not aligned\n",
-		       bp->dev->name, bp->gunzip_outlen);
+		netdev_err(bp->dev, "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
+			   bp->gunzip_outlen);
 	bp->gunzip_outlen >>= 2;
 
 	zlib_inflateEnd(bp->strm);
@@ -6213,8 +6209,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
 
 	if (sizeof(union cdu_context) != 1024)
 		/* we currently assume that a context is 1024 bytes */
-		printk(KERN_ALERT PFX "please adjust the size of"
-		       " cdu_context(%ld)\n", (long)sizeof(union cdu_context));
+		pr_alert("please adjust the size of cdu_context(%ld)\n",
+			 (long)sizeof(union cdu_context));
 
 	bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
 	val = (4 << 24) + (0 << 12) + 1024;
@@ -7020,11 +7016,10 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 	}
 
 	i = BNX2X_NUM_QUEUES(bp);
-	printk(KERN_INFO PFX "%s: using MSI-X  IRQs: sp %d  fp[%d] %d"
-	       " ... fp[%d] %d\n",
-	       bp->dev->name, bp->msix_table[0].vector,
-	       0, bp->msix_table[offset].vector,
-	       i - 1, bp->msix_table[offset + i - 1].vector);
+	netdev_info(bp->dev, "using MSI-X  IRQs: sp %d  fp[%d] %d ... fp[%d] %d\n",
+		    bp->msix_table[0].vector,
+		    0, bp->msix_table[offset].vector,
+		    i - 1, bp->msix_table[offset + i - 1].vector);
 
 	return 0;
 }
@@ -7480,8 +7475,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		}
 		if (bp->flags & USING_MSI_FLAG) {
 			bp->dev->irq = bp->pdev->irq;
-			printk(KERN_INFO PFX "%s: using MSI  IRQ %d\n",
-			       bp->dev->name, bp->pdev->irq);
+			netdev_info(bp->dev, "using MSI  IRQ %d\n",
+				    bp->pdev->irq);
 		}
 	}
 
@@ -8303,8 +8298,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 	val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
 	val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
 
-	printk(KERN_INFO PFX "part number %X-%X-%X-%X\n",
-	       val, val2, val3, val4);
+	pr_info("part number %X-%X-%X-%X\n", val, val2, val3, val4);
 }
 
 static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
@@ -8915,17 +8909,15 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 		bnx2x_undi_unload(bp);
 
 	if (CHIP_REV_IS_FPGA(bp))
-		printk(KERN_ERR PFX "FPGA detected\n");
+		pr_err("FPGA detected\n");
 
 	if (BP_NOMCP(bp) && (func == 0))
-		printk(KERN_ERR PFX
-		       "MCP disabled, must load devices in order!\n");
+		pr_err("MCP disabled, must load devices in order!\n");
 
 	/* Set multi queue mode */
 	if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
 	    ((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
-		printk(KERN_ERR PFX
-		      "Multi disabled since int_mode requested is not MSI-X\n");
+		pr_err("Multi disabled since int_mode requested is not MSI-X\n");
 		multi_mode = ETH_RSS_MODE_DISABLED;
 	}
 	bp->multi_mode = multi_mode;
@@ -9351,7 +9343,7 @@ static u32 bnx2x_get_msglevel(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
-	return bp->msglevel;
+	return bp->msg_enable;
 }
 
 static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
@@ -9359,7 +9351,7 @@ static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
 	struct bnx2x *bp = netdev_priv(dev);
 
 	if (capable(CAP_NET_ADMIN))
-		bp->msglevel = level;
+		bp->msg_enable = level;
 }
 
 static int bnx2x_nway_reset(struct net_device *dev)
@@ -10653,7 +10645,7 @@ static const struct {
 	((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
 #define IS_FUNC_STAT(i)		(bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
 #define IS_E1HMF_MODE_STAT(bp) \
-			(IS_E1HMF(bp) && !(bp->msglevel & BNX2X_MSG_STATS))
+			(IS_E1HMF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS))
 
 static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
 {
@@ -11786,20 +11778,18 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		printk(KERN_ERR PFX "Cannot enable PCI device, aborting\n");
+		pr_err("Cannot enable PCI device, aborting\n");
 		goto err_out;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		printk(KERN_ERR PFX "Cannot find PCI device base address,"
-		       " aborting\n");
+		pr_err("Cannot find PCI device base address, aborting\n");
 		rc = -ENODEV;
 		goto err_out_disable;
 	}
 
 	if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
-		printk(KERN_ERR PFX "Cannot find second PCI device"
-		       " base address, aborting\n");
+		pr_err("Cannot find second PCI device base address, aborting\n");
 		rc = -ENODEV;
 		goto err_out_disable;
 	}
@@ -11807,8 +11797,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	if (atomic_read(&pdev->enable_cnt) == 1) {
 		rc = pci_request_regions(pdev, DRV_MODULE_NAME);
 		if (rc) {
-			printk(KERN_ERR PFX "Cannot obtain PCI resources,"
-			       " aborting\n");
+			pr_err("Cannot obtain PCI resources, aborting\n");
 			goto err_out_disable;
 		}
 
@@ -11818,16 +11807,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (bp->pm_cap == 0) {
-		printk(KERN_ERR PFX "Cannot find power management"
-		       " capability, aborting\n");
+		pr_err("Cannot find power management capability, aborting\n");
 		rc = -EIO;
 		goto err_out_release;
 	}
 
 	bp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (bp->pcie_cap == 0) {
-		printk(KERN_ERR PFX "Cannot find PCI Express capability,"
-		       " aborting\n");
+		pr_err("Cannot find PCI Express capability, aborting\n");
 		rc = -EIO;
 		goto err_out_release;
 	}
@@ -11835,15 +11822,13 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
 		bp->flags |= USING_DAC_FLAG;
 		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
-			printk(KERN_ERR PFX "pci_set_consistent_dma_mask"
-			       " failed, aborting\n");
+			pr_err("pci_set_consistent_dma_mask failed, aborting\n");
 			rc = -EIO;
 			goto err_out_release;
 		}
 
 	} else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
-		printk(KERN_ERR PFX "System does not support DMA,"
-		       " aborting\n");
+		pr_err("System does not support DMA, aborting\n");
 		rc = -EIO;
 		goto err_out_release;
 	}
@@ -11856,7 +11841,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	bp->regview = pci_ioremap_bar(pdev, 0);
 	if (!bp->regview) {
-		printk(KERN_ERR PFX "Cannot map register space, aborting\n");
+		pr_err("Cannot map register space, aborting\n");
 		rc = -ENOMEM;
 		goto err_out_release;
 	}
@@ -11865,7 +11850,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 					min_t(u64, BNX2X_DB_SIZE,
 					      pci_resource_len(pdev, 2)));
 	if (!bp->doorbells) {
-		printk(KERN_ERR PFX "Cannot map doorbell space, aborting\n");
+		pr_err("Cannot map doorbell space, aborting\n");
 		rc = -ENOMEM;
 		goto err_out_unmap;
 	}
@@ -11967,8 +11952,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
 		offset = be32_to_cpu(sections[i].offset);
 		len = be32_to_cpu(sections[i].len);
 		if (offset + len > firmware->size) {
-			printk(KERN_ERR PFX "Section %d length is out of "
-					    "bounds\n", i);
+			pr_err("Section %d length is out of bounds\n", i);
 			return -EINVAL;
 		}
 	}
@@ -11980,8 +11964,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
 
 	for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
 		if (be16_to_cpu(ops_offsets[i]) > num_ops) {
-			printk(KERN_ERR PFX "Section offset %d is out of "
-					    "bounds\n", i);
+			pr_err("Section offset %d is out of bounds\n", i);
 			return -EINVAL;
 		}
 	}
@@ -11993,8 +11976,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
 	    (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
 	    (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
 	    (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
-		printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
-				    " Should be %d.%d.%d.%d\n",
+		pr_err("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
 		       fw_ver[0], fw_ver[1], fw_ver[2],
 		       fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
 		       BCM_5710_FW_MINOR_VERSION,
@@ -12044,18 +12026,17 @@ static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
 		target[i] = be16_to_cpu(source[i]);
 }
 
-#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
-	do { \
-		u32 len = be32_to_cpu(fw_hdr->arr.len); \
-		bp->arr = kmalloc(len, GFP_KERNEL); \
-		if (!bp->arr) { \
-			printk(KERN_ERR PFX "Failed to allocate %d bytes " \
-					    "for "#arr"\n", len); \
-			goto lbl; \
-		} \
-		func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
-		     (u8 *)bp->arr, len); \
-	} while (0)
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func)				\
+do {									\
+	u32 len = be32_to_cpu(fw_hdr->arr.len);				\
+	bp->arr = kmalloc(len, GFP_KERNEL);				\
+	if (!bp->arr) {							\
+		pr_err("Failed to allocate %d bytes for "#arr"\n", len); \
+		goto lbl;						\
+	}								\
+	func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset),	\
+	     (u8 *)bp->arr, len);					\
+} while (0)
 
 static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
 {
@@ -12068,18 +12049,17 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
 	else
 		fw_file_name = FW_FILE_NAME_E1H;
 
-	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+	pr_info("Loading %s\n", fw_file_name);
 
 	rc = request_firmware(&bp->firmware, fw_file_name, dev);
 	if (rc) {
-		printk(KERN_ERR PFX "Can't load firmware file %s\n",
-		       fw_file_name);
+		pr_err("Can't load firmware file %s\n", fw_file_name);
 		goto request_firmware_exit;
 	}
 
 	rc = bnx2x_check_firmware(bp);
 	if (rc) {
-		printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+		pr_err("Corrupt firmware file %s\n", fw_file_name);
 		goto request_firmware_exit;
 	}
 
@@ -12138,12 +12118,12 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* dev zeroed in init_etherdev */
 	dev = alloc_etherdev_mq(sizeof(*bp), MAX_CONTEXT);
 	if (!dev) {
-		printk(KERN_ERR PFX "Cannot allocate net device\n");
+		pr_err("Cannot allocate net device\n");
 		return -ENOMEM;
 	}
 
 	bp = netdev_priv(dev);
-	bp->msglevel = debug;
+	bp->msg_enable = debug;
 
 	pci_set_drvdata(pdev, dev);
 
@@ -12160,7 +12140,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* Set init arrays */
 	rc = bnx2x_init_firmware(bp, &pdev->dev);
 	if (rc) {
-		printk(KERN_ERR PFX "Error loading firmware\n");
+		pr_err("Error loading firmware\n");
 		goto init_one_exit;
 	}
 
@@ -12171,12 +12151,11 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	}
 
 	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
-	printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
-	       " IRQ %d, ", dev->name, board_info[ent->driver_data].name,
-	       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
-	       pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
-	       dev->base_addr, bp->pdev->irq);
-	printk(KERN_CONT "node addr %pM\n", dev->dev_addr);
+	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+		    board_info[ent->driver_data].name,
+		    (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+		    pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
+		    dev->base_addr, bp->pdev->irq, dev->dev_addr);
 
 	return 0;
 
@@ -12204,7 +12183,7 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 	struct bnx2x *bp;
 
 	if (!dev) {
-		printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+		pr_err("BAD net device from bnx2x_init_one\n");
 		return;
 	}
 	bp = netdev_priv(dev);
@@ -12237,7 +12216,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct bnx2x *bp;
 
 	if (!dev) {
-		printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+		pr_err("BAD net device from bnx2x_init_one\n");
 		return -ENODEV;
 	}
 	bp = netdev_priv(dev);
@@ -12269,7 +12248,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
 	int rc;
 
 	if (!dev) {
-		printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+		pr_err("BAD net device from bnx2x_init_one\n");
 		return -ENODEV;
 	}
 	bp = netdev_priv(dev);
@@ -12472,17 +12451,17 @@ static int __init bnx2x_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO "%s", version);
+	pr_info("%s", version);
 
 	bnx2x_wq = create_singlethread_workqueue("bnx2x");
 	if (bnx2x_wq == NULL) {
-		printk(KERN_ERR PFX "Cannot create workqueue\n");
+		pr_err("Cannot create workqueue\n");
 		return -ENOMEM;
 	}
 
 	ret = pci_register_driver(&bnx2x_pci_driver);
 	if (ret) {
-		printk(KERN_ERR PFX "Cannot register driver\n");
+		pr_err("Cannot register driver\n");
 		destroy_workqueue(bnx2x_wq);
 	}
 	return ret;
-- 
cgit v1.2.3


From 436d27d1db147713e4cd17b2fa491d22374bda98 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:53 +0000
Subject: drivers/net/cassini.c: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cassini.c | 361 +++++++++++++++++++++-----------------------------
 1 file changed, 151 insertions(+), 210 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index f90cac43130d..7cbcfb0ade1c 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -66,6 +66,7 @@
  * by default, the selective clear mask is set up to process rx packets.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -143,7 +144,6 @@
 #undef  RX_COUNT_BUFFERS    /* define to calculate RX buffer stats */
 
 #define DRV_MODULE_NAME		"cassini"
-#define PFX DRV_MODULE_NAME	": "
 #define DRV_MODULE_VERSION	"1.6"
 #define DRV_MODULE_RELDATE	"21 May 2008"
 
@@ -649,9 +649,8 @@ static cas_page_t *cas_page_dequeue(struct cas *cp)
 		cas_spare_recover(cp, GFP_ATOMIC);
 		spin_lock(&cp->rx_spare_lock);
 		if (list_empty(&cp->rx_spare_list)) {
-			if (netif_msg_rx_err(cp))
-				printk(KERN_ERR "%s: no spare buffers "
-				       "available.\n", cp->dev->name);
+			netif_err(cp, rx_err, cp->dev,
+				  "no spare buffers available\n");
 			spin_unlock(&cp->rx_spare_lock);
 			return NULL;
 		}
@@ -728,12 +727,10 @@ static void cas_begin_auto_negotiation(struct cas *cp, struct ethtool_cmd *ep)
 #endif
 start_aneg:
 	if (cp->lstate == link_up) {
-		printk(KERN_INFO "%s: PCS link down.\n",
-		       cp->dev->name);
+		netdev_info(cp->dev, "PCS link down\n");
 	} else {
 		if (changed) {
-			printk(KERN_INFO "%s: link configuration changed\n",
-			       cp->dev->name);
+			netdev_info(cp->dev, "link configuration changed\n");
 		}
 	}
 	cp->lstate = link_down;
@@ -826,12 +823,12 @@ static int cas_saturn_firmware_init(struct cas *cp)
 
 	err = request_firmware(&fw, fw_name, &cp->pdev->dev);
 	if (err) {
-		printk(KERN_ERR "cassini: Failed to load firmware \"%s\"\n",
+		pr_err("Failed to load firmware \"%s\"\n",
 		       fw_name);
 		return err;
 	}
 	if (fw->size < 2) {
-		printk(KERN_ERR "cassini: bogus length %zu in \"%s\"\n",
+		pr_err("bogus length %zu in \"%s\"\n",
 		       fw->size, fw_name);
 		err = -EINVAL;
 		goto out;
@@ -841,7 +838,7 @@ static int cas_saturn_firmware_init(struct cas *cp)
 	cp->fw_data = vmalloc(cp->fw_size);
 	if (!cp->fw_data) {
 		err = -ENOMEM;
-		printk(KERN_ERR "cassini: \"%s\" Failed %d\n", fw_name, err);
+		pr_err("\"%s\" Failed %d\n", fw_name, err);
 		goto out;
 	}
 	memcpy(cp->fw_data, &fw->data[2], cp->fw_size);
@@ -986,9 +983,8 @@ static void cas_phy_init(struct cas *cp)
 				break;
 		}
 		if (limit <= 0)
-			printk(KERN_WARNING "%s: PCS reset bit would not "
-			       "clear [%08x].\n", cp->dev->name,
-			       readl(cp->regs + REG_PCS_STATE_MACHINE));
+			netdev_warn(cp->dev, "PCS reset bit would not clear [%08x]\n",
+				    readl(cp->regs + REG_PCS_STATE_MACHINE));
 
 		/* Make sure PCS is disabled while changing advertisement
 		 * configuration.
@@ -1030,11 +1026,8 @@ static int cas_pcs_link_check(struct cas *cp)
 	 */
 	if ((stat & (PCS_MII_STATUS_AUTONEG_COMP |
 		     PCS_MII_STATUS_REMOTE_FAULT)) ==
-	    (PCS_MII_STATUS_AUTONEG_COMP | PCS_MII_STATUS_REMOTE_FAULT)) {
-		if (netif_msg_link(cp))
-			printk(KERN_INFO "%s: PCS RemoteFault\n",
-			       cp->dev->name);
-	}
+	    (PCS_MII_STATUS_AUTONEG_COMP | PCS_MII_STATUS_REMOTE_FAULT))
+		netif_info(cp, link, cp->dev, "PCS RemoteFault\n");
 
 	/* work around link detection issue by querying the PCS state
 	 * machine directly.
@@ -1081,10 +1074,8 @@ static int cas_pcs_link_check(struct cas *cp)
 			cp->link_transition = LINK_TRANSITION_ON_FAILURE;
 		}
 		netif_carrier_off(cp->dev);
-		if (cp->opened && netif_msg_link(cp)) {
-			printk(KERN_INFO "%s: PCS link down.\n",
-			       cp->dev->name);
-		}
+		if (cp->opened)
+			netif_info(cp, link, cp->dev, "PCS link down\n");
 
 		/* Cassini only: if you force a mode, there can be
 		 * sync problems on link down. to fix that, the following
@@ -1139,9 +1130,8 @@ static int cas_txmac_interrupt(struct net_device *dev,
 	if (!txmac_stat)
 		return 0;
 
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: txmac interrupt, txmac_stat: 0x%x\n",
-			cp->dev->name, txmac_stat);
+	netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+		     "txmac interrupt, txmac_stat: 0x%x\n", txmac_stat);
 
 	/* Defer timer expiration is quite normal,
 	 * don't even log the event.
@@ -1152,14 +1142,12 @@ static int cas_txmac_interrupt(struct net_device *dev,
 
 	spin_lock(&cp->stat_lock[0]);
 	if (txmac_stat & MAC_TX_UNDERRUN) {
-		printk(KERN_ERR "%s: TX MAC xmit underrun.\n",
-		       dev->name);
+		netdev_err(dev, "TX MAC xmit underrun\n");
 		cp->net_stats[0].tx_fifo_errors++;
 	}
 
 	if (txmac_stat & MAC_TX_MAX_PACKET_ERR) {
-		printk(KERN_ERR "%s: TX MAC max packet size error.\n",
-		       dev->name);
+		netdev_err(dev, "TX MAC max packet size error\n");
 		cp->net_stats[0].tx_errors++;
 	}
 
@@ -1487,8 +1475,7 @@ static int cas_rxmac_reset(struct cas *cp)
 		udelay(10);
 	}
 	if (limit == STOP_TRIES) {
-		printk(KERN_ERR "%s: RX MAC will not disable, resetting whole "
-		       "chip.\n", dev->name);
+		netdev_err(dev, "RX MAC will not disable, resetting whole chip\n");
 		return 1;
 	}
 
@@ -1500,8 +1487,7 @@ static int cas_rxmac_reset(struct cas *cp)
 		udelay(10);
 	}
 	if (limit == STOP_TRIES) {
-		printk(KERN_ERR "%s: RX DMA will not disable, resetting whole "
-		       "chip.\n", dev->name);
+		netdev_err(dev, "RX DMA will not disable, resetting whole chip\n");
 		return 1;
 	}
 
@@ -1515,8 +1501,7 @@ static int cas_rxmac_reset(struct cas *cp)
 		udelay(10);
 	}
 	if (limit == STOP_TRIES) {
-		printk(KERN_ERR "%s: RX reset command will not execute, "
-		       "resetting whole chip.\n", dev->name);
+		netdev_err(dev, "RX reset command will not execute, resetting whole chip\n");
 		return 1;
 	}
 
@@ -1545,9 +1530,7 @@ static int cas_rxmac_interrupt(struct net_device *dev, struct cas *cp,
 	if (!stat)
 		return 0;
 
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: rxmac interrupt, stat: 0x%x\n",
-			cp->dev->name, stat);
+	netif_dbg(cp, intr, cp->dev, "rxmac interrupt, stat: 0x%x\n", stat);
 
 	/* these are all rollovers */
 	spin_lock(&cp->stat_lock[0]);
@@ -1580,9 +1563,8 @@ static int cas_mac_interrupt(struct net_device *dev, struct cas *cp,
 	if (!stat)
 		return 0;
 
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: mac interrupt, stat: 0x%x\n",
-			cp->dev->name, stat);
+	netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+		     "mac interrupt, stat: 0x%x\n", stat);
 
 	/* This interrupt is just for pause frame and pause
 	 * tracking.  It is useful for diagnostics and debug
@@ -1605,9 +1587,7 @@ static inline int cas_mdio_link_not_up(struct cas *cp)
 
 	switch (cp->lstate) {
 	case link_force_ret:
-		if (netif_msg_link(cp))
-			printk(KERN_INFO "%s: Autoneg failed again, keeping"
-				" forced mode\n", cp->dev->name);
+		netif_info(cp, link, cp->dev, "Autoneg failed again, keeping forced mode\n");
 		cas_phy_write(cp, MII_BMCR, cp->link_fcntl);
 		cp->timer_ticks = 5;
 		cp->lstate = link_force_ok;
@@ -1675,9 +1655,9 @@ static int cas_mii_link_check(struct cas *cp, const u16 bmsr)
 			cas_mif_poll(cp, 0);
 			cp->link_fcntl = cas_phy_read(cp, MII_BMCR);
 			cp->timer_ticks = 5;
-			if (cp->opened && netif_msg_link(cp))
-				printk(KERN_INFO "%s: Got link after fallback, retrying"
-				       " autoneg once...\n", cp->dev->name);
+			if (cp->opened)
+				netif_info(cp, link, cp->dev,
+					   "Got link after fallback, retrying autoneg once...\n");
 			cas_phy_write(cp, MII_BMCR,
 				      cp->link_fcntl | BMCR_ANENABLE |
 				      BMCR_ANRESTART);
@@ -1704,9 +1684,8 @@ static int cas_mii_link_check(struct cas *cp, const u16 bmsr)
 		cp->link_transition = LINK_TRANSITION_LINK_DOWN;
 
 		netif_carrier_off(cp->dev);
-		if (cp->opened && netif_msg_link(cp))
-			printk(KERN_INFO "%s: Link down\n",
-			       cp->dev->name);
+		if (cp->opened)
+			netif_info(cp, link, cp->dev, "Link down\n");
 		restart = 1;
 
 	} else if (++cp->timer_ticks > 10)
@@ -1737,23 +1716,23 @@ static int cas_pci_interrupt(struct net_device *dev, struct cas *cp,
 	if (!stat)
 		return 0;
 
-	printk(KERN_ERR "%s: PCI error [%04x:%04x] ", dev->name, stat,
-	       readl(cp->regs + REG_BIM_DIAG));
+	netdev_err(dev, "PCI error [%04x:%04x]",
+		   stat, readl(cp->regs + REG_BIM_DIAG));
 
 	/* cassini+ has this reserved */
 	if ((stat & PCI_ERR_BADACK) &&
 	    ((cp->cas_flags & CAS_FLAG_REG_PLUS) == 0))
-		printk("<No ACK64# during ABS64 cycle> ");
+		pr_cont(" <No ACK64# during ABS64 cycle>");
 
 	if (stat & PCI_ERR_DTRTO)
-		printk("<Delayed transaction timeout> ");
+		pr_cont(" <Delayed transaction timeout>");
 	if (stat & PCI_ERR_OTHER)
-		printk("<other> ");
+		pr_cont(" <other>");
 	if (stat & PCI_ERR_BIM_DMA_WRITE)
-		printk("<BIM DMA 0 write req> ");
+		pr_cont(" <BIM DMA 0 write req>");
 	if (stat & PCI_ERR_BIM_DMA_READ)
-		printk("<BIM DMA 0 read req> ");
-	printk("\n");
+		pr_cont(" <BIM DMA 0 read req>");
+	pr_cont("\n");
 
 	if (stat & PCI_ERR_OTHER) {
 		u16 cfg;
@@ -1762,25 +1741,19 @@ static int cas_pci_interrupt(struct net_device *dev, struct cas *cp,
 		 * true cause.
 		 */
 		pci_read_config_word(cp->pdev, PCI_STATUS, &cfg);
-		printk(KERN_ERR "%s: Read PCI cfg space status [%04x]\n",
-		       dev->name, cfg);
+		netdev_err(dev, "Read PCI cfg space status [%04x]\n", cfg);
 		if (cfg & PCI_STATUS_PARITY)
-			printk(KERN_ERR "%s: PCI parity error detected.\n",
-			       dev->name);
+			netdev_err(dev, "PCI parity error detected\n");
 		if (cfg & PCI_STATUS_SIG_TARGET_ABORT)
-			printk(KERN_ERR "%s: PCI target abort.\n",
-			       dev->name);
+			netdev_err(dev, "PCI target abort\n");
 		if (cfg & PCI_STATUS_REC_TARGET_ABORT)
-			printk(KERN_ERR "%s: PCI master acks target abort.\n",
-			       dev->name);
+			netdev_err(dev, "PCI master acks target abort\n");
 		if (cfg & PCI_STATUS_REC_MASTER_ABORT)
-			printk(KERN_ERR "%s: PCI master abort.\n", dev->name);
+			netdev_err(dev, "PCI master abort\n");
 		if (cfg & PCI_STATUS_SIG_SYSTEM_ERROR)
-			printk(KERN_ERR "%s: PCI system error SERR#.\n",
-			       dev->name);
+			netdev_err(dev, "PCI system error SERR#\n");
 		if (cfg & PCI_STATUS_DETECTED_PARITY)
-			printk(KERN_ERR "%s: PCI parity error.\n",
-			       dev->name);
+			netdev_err(dev, "PCI parity error\n");
 
 		/* Write the error bits back to clear them. */
 		cfg &= (PCI_STATUS_PARITY |
@@ -1806,9 +1779,8 @@ static int cas_abnormal_irq(struct net_device *dev, struct cas *cp,
 {
 	if (status & INTR_RX_TAG_ERROR) {
 		/* corrupt RX tag framing */
-		if (netif_msg_rx_err(cp))
-			printk(KERN_DEBUG "%s: corrupt rx tag framing\n",
-				cp->dev->name);
+		netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+			     "corrupt rx tag framing\n");
 		spin_lock(&cp->stat_lock[0]);
 		cp->net_stats[0].rx_errors++;
 		spin_unlock(&cp->stat_lock[0]);
@@ -1817,9 +1789,8 @@ static int cas_abnormal_irq(struct net_device *dev, struct cas *cp,
 
 	if (status & INTR_RX_LEN_MISMATCH) {
 		/* length mismatch. */
-		if (netif_msg_rx_err(cp))
-			printk(KERN_DEBUG "%s: length mismatch for rx frame\n",
-				cp->dev->name);
+		netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+			     "length mismatch for rx frame\n");
 		spin_lock(&cp->stat_lock[0]);
 		cp->net_stats[0].rx_errors++;
 		spin_unlock(&cp->stat_lock[0]);
@@ -1861,12 +1832,11 @@ do_reset:
 #if 1
 	atomic_inc(&cp->reset_task_pending);
 	atomic_inc(&cp->reset_task_pending_all);
-	printk(KERN_ERR "%s:reset called in cas_abnormal_irq [0x%x]\n",
-	       dev->name, status);
+	netdev_err(dev, "reset called in cas_abnormal_irq [0x%x]\n", status);
 	schedule_work(&cp->reset_task);
 #else
 	atomic_set(&cp->reset_task_pending, CAS_RESET_ALL);
-	printk(KERN_ERR "reset called in cas_abnormal_irq\n");
+	netdev_err(dev, "reset called in cas_abnormal_irq\n");
 	schedule_work(&cp->reset_task);
 #endif
 	return 1;
@@ -1920,9 +1890,8 @@ static inline void cas_tx_ringN(struct cas *cp, int ring, int limit)
 		if (count < 0)
 			break;
 
-		if (netif_msg_tx_done(cp))
-			printk(KERN_DEBUG "%s: tx[%d] done, slot %d\n",
-			       cp->dev->name, ring, entry);
+		netif_printk(cp, tx_done, KERN_DEBUG, cp->dev,
+			     "tx[%d] done, slot %d\n", ring, entry);
 
 		skbs[entry] = NULL;
 		cp->tx_tiny_use[ring][entry].nbufs = 0;
@@ -1969,9 +1938,9 @@ static void cas_tx(struct net_device *dev, struct cas *cp,
 #ifdef USE_TX_COMPWB
 	u64 compwb = le64_to_cpu(cp->init_block->tx_compwb);
 #endif
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: tx interrupt, status: 0x%x, %llx\n",
-			cp->dev->name, status, (unsigned long long)compwb);
+	netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+		     "tx interrupt, status: 0x%x, %llx\n",
+		     status, (unsigned long long)compwb);
 	/* process all the rings */
 	for (ring = 0; ring < N_TX_RINGS; ring++) {
 #ifdef USE_TX_COMPWB
@@ -2050,10 +2019,8 @@ static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc,
 
 		hlen = min(cp->page_size - off, dlen);
 		if (hlen < 0) {
-			if (netif_msg_rx_err(cp)) {
-				printk(KERN_DEBUG "%s: rx page overflow: "
-				       "%d\n", cp->dev->name, hlen);
-			}
+			netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+				     "rx page overflow: %d\n", hlen);
 			dev_kfree_skb_irq(skb);
 			return -1;
 		}
@@ -2130,10 +2097,8 @@ static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc,
 		off = CAS_VAL(RX_COMP1_DATA_OFF, words[0]) + swivel;
 		hlen = min(cp->page_size - off, dlen);
 		if (hlen < 0) {
-			if (netif_msg_rx_err(cp)) {
-				printk(KERN_DEBUG "%s: rx page overflow: "
-				       "%d\n", cp->dev->name, hlen);
-			}
+			netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+				     "rx page overflow: %d\n", hlen);
 			dev_kfree_skb_irq(skb);
 			return -1;
 		}
@@ -2265,9 +2230,8 @@ static int cas_post_rxds_ringN(struct cas *cp, int ring, int num)
 
 	entry = cp->rx_old[ring];
 
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: rxd[%d] interrupt, done: %d\n",
-		       cp->dev->name, ring, entry);
+	netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+		     "rxd[%d] interrupt, done: %d\n", ring, entry);
 
 	cluster = -1;
 	count = entry & 0x3;
@@ -2337,11 +2301,10 @@ static int cas_rx_ringN(struct cas *cp, int ring, int budget)
 	int entry, drops;
 	int npackets = 0;
 
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: rx[%d] interrupt, done: %d/%d\n",
-		       cp->dev->name, ring,
-		       readl(cp->regs + REG_RX_COMP_HEAD),
-		       cp->rx_new[ring]);
+	netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+		     "rx[%d] interrupt, done: %d/%d\n",
+		     ring,
+		     readl(cp->regs + REG_RX_COMP_HEAD), cp->rx_new[ring]);
 
 	entry = cp->rx_new[ring];
 	drops = 0;
@@ -2442,8 +2405,7 @@ static int cas_rx_ringN(struct cas *cp, int ring, int budget)
 	cp->rx_new[ring] = entry;
 
 	if (drops)
-		printk(KERN_INFO "%s: Memory squeeze, deferring packet.\n",
-		       cp->dev->name);
+		netdev_info(cp->dev, "Memory squeeze, deferring packet\n");
 	return npackets;
 }
 
@@ -2457,10 +2419,9 @@ static void cas_post_rxcs_ringN(struct net_device *dev,
 
 	last = cp->rx_cur[ring];
 	entry = cp->rx_new[ring];
-	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: rxc[%d] interrupt, done: %d/%d\n",
-		       dev->name, ring, readl(cp->regs + REG_RX_COMP_HEAD),
-		       entry);
+	netif_printk(cp, intr, KERN_DEBUG, dev,
+		     "rxc[%d] interrupt, done: %d/%d\n",
+		     ring, readl(cp->regs + REG_RX_COMP_HEAD), entry);
 
 	/* zero and re-mark descriptors */
 	while (last != entry) {
@@ -2729,42 +2690,38 @@ static void cas_tx_timeout(struct net_device *dev)
 {
 	struct cas *cp = netdev_priv(dev);
 
-	printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
+	netdev_err(dev, "transmit timed out, resetting\n");
 	if (!cp->hw_running) {
-		printk("%s: hrm.. hw not running!\n", dev->name);
+		netdev_err(dev, "hrm.. hw not running!\n");
 		return;
 	}
 
-	printk(KERN_ERR "%s: MIF_STATE[%08x]\n",
-	       dev->name, readl(cp->regs + REG_MIF_STATE_MACHINE));
-
-	printk(KERN_ERR "%s: MAC_STATE[%08x]\n",
-	       dev->name, readl(cp->regs + REG_MAC_STATE_MACHINE));
-
-	printk(KERN_ERR "%s: TX_STATE[%08x:%08x:%08x] "
-	       "FIFO[%08x:%08x:%08x] SM1[%08x] SM2[%08x]\n",
-	       dev->name,
-	       readl(cp->regs + REG_TX_CFG),
-	       readl(cp->regs + REG_MAC_TX_STATUS),
-	       readl(cp->regs + REG_MAC_TX_CFG),
-	       readl(cp->regs + REG_TX_FIFO_PKT_CNT),
-	       readl(cp->regs + REG_TX_FIFO_WRITE_PTR),
-	       readl(cp->regs + REG_TX_FIFO_READ_PTR),
-	       readl(cp->regs + REG_TX_SM_1),
-	       readl(cp->regs + REG_TX_SM_2));
-
-	printk(KERN_ERR "%s: RX_STATE[%08x:%08x:%08x]\n",
-	       dev->name,
-	       readl(cp->regs + REG_RX_CFG),
-	       readl(cp->regs + REG_MAC_RX_STATUS),
-	       readl(cp->regs + REG_MAC_RX_CFG));
-
-	printk(KERN_ERR "%s: HP_STATE[%08x:%08x:%08x:%08x]\n",
-	       dev->name,
-	       readl(cp->regs + REG_HP_STATE_MACHINE),
-	       readl(cp->regs + REG_HP_STATUS0),
-	       readl(cp->regs + REG_HP_STATUS1),
-	       readl(cp->regs + REG_HP_STATUS2));
+	netdev_err(dev, "MIF_STATE[%08x]\n",
+		   readl(cp->regs + REG_MIF_STATE_MACHINE));
+
+	netdev_err(dev, "MAC_STATE[%08x]\n",
+		   readl(cp->regs + REG_MAC_STATE_MACHINE));
+
+	netdev_err(dev, "TX_STATE[%08x:%08x:%08x] FIFO[%08x:%08x:%08x] SM1[%08x] SM2[%08x]\n",
+		   readl(cp->regs + REG_TX_CFG),
+		   readl(cp->regs + REG_MAC_TX_STATUS),
+		   readl(cp->regs + REG_MAC_TX_CFG),
+		   readl(cp->regs + REG_TX_FIFO_PKT_CNT),
+		   readl(cp->regs + REG_TX_FIFO_WRITE_PTR),
+		   readl(cp->regs + REG_TX_FIFO_READ_PTR),
+		   readl(cp->regs + REG_TX_SM_1),
+		   readl(cp->regs + REG_TX_SM_2));
+
+	netdev_err(dev, "RX_STATE[%08x:%08x:%08x]\n",
+		   readl(cp->regs + REG_RX_CFG),
+		   readl(cp->regs + REG_MAC_RX_STATUS),
+		   readl(cp->regs + REG_MAC_RX_CFG));
+
+	netdev_err(dev, "HP_STATE[%08x:%08x:%08x:%08x]\n",
+		   readl(cp->regs + REG_HP_STATE_MACHINE),
+		   readl(cp->regs + REG_HP_STATUS0),
+		   readl(cp->regs + REG_HP_STATUS1),
+		   readl(cp->regs + REG_HP_STATUS2));
 
 #if 1
 	atomic_inc(&cp->reset_task_pending);
@@ -2830,8 +2787,7 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
 	    CAS_TABORT(cp)*(skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&cp->tx_lock[ring], flags);
-		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
-		       "queue awake!\n", dev->name);
+		netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
 		return 1;
 	}
 
@@ -2908,11 +2864,9 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
 	if (TX_BUFFS_AVAIL(cp, ring) <= CAS_TABORT(cp)*(MAX_SKB_FRAGS + 1))
 		netif_stop_queue(dev);
 
-	if (netif_msg_tx_queued(cp))
-		printk(KERN_DEBUG "%s: tx[%d] queued, slot %d, skblen %d, "
-		       "avail %d\n",
-		       dev->name, ring, entry, skb->len,
-		       TX_BUFFS_AVAIL(cp, ring));
+	netif_printk(cp, tx_queued, KERN_DEBUG, dev,
+		     "tx[%d] queued, slot %d, skblen %d, avail %d\n",
+		     ring, entry, skb->len, TX_BUFFS_AVAIL(cp, ring));
 	writel(entry, cp->regs + REG_TX_KICKN(ring));
 	spin_unlock_irqrestore(&cp->tx_lock[ring], flags);
 	return 0;
@@ -3098,10 +3052,10 @@ static void cas_mac_reset(struct cas *cp)
 
 	if (readl(cp->regs + REG_MAC_TX_RESET) |
 	    readl(cp->regs + REG_MAC_RX_RESET))
-		printk(KERN_ERR "%s: mac tx[%d]/rx[%d] reset failed [%08x]\n",
-		       cp->dev->name, readl(cp->regs + REG_MAC_TX_RESET),
-		       readl(cp->regs + REG_MAC_RX_RESET),
-		       readl(cp->regs + REG_MAC_STATE_MACHINE));
+		netdev_err(cp->dev, "mac tx[%d]/rx[%d] reset failed [%08x]\n",
+			   readl(cp->regs + REG_MAC_TX_RESET),
+			   readl(cp->regs + REG_MAC_RX_RESET),
+			   readl(cp->regs + REG_MAC_STATE_MACHINE));
 }
 
 
@@ -3421,7 +3375,7 @@ use_random_mac_addr:
 		goto done;
 
 	/* Sun MAC prefix then 3 random bytes. */
-	printk(PFX "MAC address not found in ROM VPD\n");
+	pr_info("MAC address not found in ROM VPD\n");
 	dev_addr[0] = 0x08;
 	dev_addr[1] = 0x00;
 	dev_addr[2] = 0x20;
@@ -3482,7 +3436,7 @@ static int cas_check_invariants(struct cas *cp)
 			__free_pages(page, CAS_JUMBO_PAGE_SHIFT - PAGE_SHIFT);
 			cp->page_order = CAS_JUMBO_PAGE_SHIFT - PAGE_SHIFT;
 		} else {
-			printk(PFX "MTU limited to %d bytes\n", CAS_MAX_MTU);
+			printk("MTU limited to %d bytes\n", CAS_MAX_MTU);
 		}
 	}
 #endif
@@ -3527,7 +3481,7 @@ static int cas_check_invariants(struct cas *cp)
 			}
 		}
 	}
-	printk(KERN_ERR PFX "MII phy did not respond [%08x]\n",
+	pr_err("MII phy did not respond [%08x]\n",
 	       readl(cp->regs + REG_MIF_STATE_MACHINE));
 	return -1;
 
@@ -3572,21 +3526,19 @@ static inline void cas_start_dma(struct cas *cp)
 		val = readl(cp->regs + REG_MAC_RX_CFG);
 		if ((val & MAC_RX_CFG_EN)) {
 			if (txfailed) {
-			  printk(KERN_ERR
-				 "%s: enabling mac failed [tx:%08x:%08x].\n",
-				 cp->dev->name,
-				 readl(cp->regs + REG_MIF_STATE_MACHINE),
-				 readl(cp->regs + REG_MAC_STATE_MACHINE));
+				netdev_err(cp->dev,
+					   "enabling mac failed [tx:%08x:%08x]\n",
+					   readl(cp->regs + REG_MIF_STATE_MACHINE),
+					   readl(cp->regs + REG_MAC_STATE_MACHINE));
 			}
 			goto enable_rx_done;
 		}
 		udelay(10);
 	}
-	printk(KERN_ERR "%s: enabling mac failed [%s:%08x:%08x].\n",
-	       cp->dev->name,
-	       (txfailed? "tx,rx":"rx"),
-	       readl(cp->regs + REG_MIF_STATE_MACHINE),
-	       readl(cp->regs + REG_MAC_STATE_MACHINE));
+	netdev_err(cp->dev, "enabling mac failed [%s:%08x:%08x]\n",
+		   (txfailed ? "tx,rx" : "rx"),
+		   readl(cp->regs + REG_MIF_STATE_MACHINE),
+		   readl(cp->regs + REG_MAC_STATE_MACHINE));
 
 enable_rx_done:
 	cas_unmask_intr(cp); /* enable interrupts */
@@ -3688,9 +3640,8 @@ static void cas_set_link_modes(struct cas *cp)
 		}
 	}
 
-	if (netif_msg_link(cp))
-		printk(KERN_INFO "%s: Link up at %d Mbps, %s-duplex.\n",
-		       cp->dev->name, speed, (full_duplex ? "full" : "half"));
+	netif_info(cp, link, cp->dev, "Link up at %d Mbps, %s-duplex\n",
+		   speed, full_duplex ? "full" : "half");
 
 	val = MAC_XIF_TX_MII_OUTPUT_EN | MAC_XIF_LINK_LED;
 	if (CAS_PHY_MII(cp->phy_type)) {
@@ -3760,18 +3711,14 @@ static void cas_set_link_modes(struct cas *cp)
 
 	if (netif_msg_link(cp)) {
 		if (pause & 0x01) {
-			printk(KERN_INFO "%s: Pause is enabled "
-			       "(rxfifo: %d off: %d on: %d)\n",
-			       cp->dev->name,
-			       cp->rx_fifo_size,
-			       cp->rx_pause_off,
-			       cp->rx_pause_on);
+			netdev_info(cp->dev, "Pause is enabled (rxfifo: %d off: %d on: %d)\n",
+				    cp->rx_fifo_size,
+				    cp->rx_pause_off,
+				    cp->rx_pause_on);
 		} else if (pause & 0x10) {
-			printk(KERN_INFO "%s: TX pause enabled\n",
-			       cp->dev->name);
+			netdev_info(cp->dev, "TX pause enabled\n");
 		} else {
-			printk(KERN_INFO "%s: Pause is disabled\n",
-			       cp->dev->name);
+			netdev_info(cp->dev, "Pause is disabled\n");
 		}
 	}
 
@@ -3847,7 +3794,7 @@ static void cas_global_reset(struct cas *cp, int blkflag)
 			goto done;
 		udelay(10);
 	}
-	printk(KERN_ERR "%s: sw reset failed.\n", cp->dev->name);
+	netdev_err(cp->dev, "sw reset failed\n");
 
 done:
 	/* enable various BIM interrupts */
@@ -3953,7 +3900,7 @@ static int cas_change_mtu(struct net_device *dev, int new_mtu)
 #else
 	atomic_set(&cp->reset_task_pending, (cp->phy_type & CAS_PHY_SERDES) ?
 		   CAS_RESET_ALL : CAS_RESET_MTU);
-	printk(KERN_ERR "reset called in cas_change_mtu\n");
+	pr_err("reset called in cas_change_mtu\n");
 	schedule_work(&cp->reset_task);
 #endif
 
@@ -4235,10 +4182,8 @@ static void cas_link_timer(unsigned long data)
 
 		if (((tlm == 0x5) || (tlm == 0x3)) &&
 		    (CAS_VAL(MAC_SM_ENCAP_SM, val) == 0)) {
-			if (netif_msg_tx_err(cp))
-				printk(KERN_DEBUG "%s: tx err: "
-				       "MAC_STATE[%08x]\n",
-				       cp->dev->name, val);
+			netif_printk(cp, tx_err, KERN_DEBUG, cp->dev,
+				     "tx err: MAC_STATE[%08x]\n", val);
 			reset = 1;
 			goto done;
 		}
@@ -4247,10 +4192,9 @@ static void cas_link_timer(unsigned long data)
 		wptr = readl(cp->regs + REG_TX_FIFO_WRITE_PTR);
 		rptr = readl(cp->regs + REG_TX_FIFO_READ_PTR);
 		if ((val == 0) && (wptr != rptr)) {
-			if (netif_msg_tx_err(cp))
-				printk(KERN_DEBUG "%s: tx err: "
-				       "TX_FIFO[%08x:%08x:%08x]\n",
-				       cp->dev->name, val, wptr, rptr);
+			netif_printk(cp, tx_err, KERN_DEBUG, cp->dev,
+				     "tx err: TX_FIFO[%08x:%08x:%08x]\n",
+				     val, wptr, rptr);
 			reset = 1;
 		}
 
@@ -4266,7 +4210,7 @@ done:
 		schedule_work(&cp->reset_task);
 #else
 		atomic_set(&cp->reset_task_pending, CAS_RESET_ALL);
-		printk(KERN_ERR "reset called in cas_link_timer\n");
+		pr_err("reset called in cas_link_timer\n");
 		schedule_work(&cp->reset_task);
 #endif
 	}
@@ -4359,8 +4303,7 @@ static int cas_open(struct net_device *dev)
 	 */
 	if (request_irq(cp->pdev->irq, cas_interrupt,
 			IRQF_SHARED, dev->name, (void *) dev)) {
-		printk(KERN_ERR "%s: failed to request irq !\n",
-		       cp->dev->name);
+		netdev_err(cp->dev, "failed to request irq !\n");
 		err = -EAGAIN;
 		goto err_spare;
 	}
@@ -5000,24 +4943,24 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	u8 orig_cacheline_size = 0, cas_cacheline_size = 0;
 
 	if (cas_version_printed++ == 0)
-		printk(KERN_INFO "%s", version);
+		pr_info("%s", version);
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
+		dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
 		return err;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
 		dev_err(&pdev->dev, "Cannot find proper PCI device "
-		       "base address, aborting.\n");
+		       "base address, aborting\n");
 		err = -ENODEV;
 		goto err_out_disable_pdev;
 	}
 
 	dev = alloc_etherdev(sizeof(*cp));
 	if (!dev) {
-		dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n");
+		dev_err(&pdev->dev, "Etherdev alloc failed, aborting\n");
 		err = -ENOMEM;
 		goto err_out_disable_pdev;
 	}
@@ -5025,7 +4968,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 
 	err = pci_request_regions(pdev, dev->name);
 	if (err) {
-		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
 		goto err_out_free_netdev;
 	}
 	pci_set_master(pdev);
@@ -5039,8 +4982,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	pci_cmd |= PCI_COMMAND_PARITY;
 	pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
 	if (pci_try_set_mwi(pdev))
-		printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
-		       pci_name(pdev));
+		pr_warning("Could not enable MWI for %s\n", pci_name(pdev));
 
 	cas_program_bridge(pdev);
 
@@ -5083,7 +5025,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
 			dev_err(&pdev->dev, "No usable DMA configuration, "
-			       "aborting.\n");
+			       "aborting\n");
 			goto err_out_free_res;
 		}
 		pci_using_dac = 0;
@@ -5142,7 +5084,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	/* give us access to cassini registers */
 	cp->regs = pci_iomap(pdev, 0, casreg_len);
 	if (!cp->regs) {
-		dev_err(&pdev->dev, "Cannot map device registers, aborting.\n");
+		dev_err(&pdev->dev, "Cannot map device registers, aborting\n");
 		goto err_out_free_res;
 	}
 	cp->casreg_len = casreg_len;
@@ -5161,7 +5103,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		pci_alloc_consistent(pdev, sizeof(struct cas_init_block),
 				     &cp->block_dvma);
 	if (!cp->init_block) {
-		dev_err(&pdev->dev, "Cannot allocate init block, aborting.\n");
+		dev_err(&pdev->dev, "Cannot allocate init block, aborting\n");
 		goto err_out_iounmap;
 	}
 
@@ -5195,18 +5137,17 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 		dev->features |= NETIF_F_HIGHDMA;
 
 	if (register_netdev(dev)) {
-		dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
+		dev_err(&pdev->dev, "Cannot register net device, aborting\n");
 		goto err_out_free_consistent;
 	}
 
 	i = readl(cp->regs + REG_BIM_CFG);
-	printk(KERN_INFO "%s: Sun Cassini%s (%sbit/%sMHz PCI/%s) "
-	       "Ethernet[%d] %pM\n",  dev->name,
-	       (cp->cas_flags & CAS_FLAG_REG_PLUS) ? "+" : "",
-	       (i & BIM_CFG_32BIT) ? "32" : "64",
-	       (i & BIM_CFG_66MHZ) ? "66" : "33",
-	       (cp->phy_type == CAS_PHY_SERDES) ? "Fi" : "Cu", pdev->irq,
-	       dev->dev_addr);
+	netdev_info(dev, "Sun Cassini%s (%sbit/%sMHz PCI/%s) Ethernet[%d] %pM\n",
+		    (cp->cas_flags & CAS_FLAG_REG_PLUS) ? "+" : "",
+		    (i & BIM_CFG_32BIT) ? "32" : "64",
+		    (i & BIM_CFG_66MHZ) ? "66" : "33",
+		    (cp->phy_type == CAS_PHY_SERDES) ? "Fi" : "Cu", pdev->irq,
+		    dev->dev_addr);
 
 	pci_set_drvdata(pdev, dev);
 	cp->hw_running = 1;
@@ -5320,7 +5261,7 @@ static int cas_resume(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct cas *cp = netdev_priv(dev);
 
-	printk(KERN_INFO "%s: resuming\n", dev->name);
+	netdev_info(dev, "resuming\n");
 
 	mutex_lock(&cp->pm_mutex);
 	cas_hard_reset(cp);
-- 
cgit v1.2.3


From ddf79b20eefd27797ce461411679a48e998701ca Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:54 +0000
Subject: drivers/net/cnic.c: Use (pr|netdev)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Remove periods from formats
Coalesce long formats
Use __func__

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c | 87 +++++++++++++++++++++++-------------------------------
 1 file changed, 37 insertions(+), 50 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 4332b3a2fafb..6aecef930fa8 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -10,6 +10,8 @@
  * Modified and maintained by: Michael Chan <mchan@broadcom.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 
 #include <linux/kernel.h>
@@ -47,7 +49,6 @@
 #include "cnic_defs.h"
 
 #define DRV_MODULE_NAME		"cnic"
-#define PFX DRV_MODULE_NAME	": "
 
 static char version[] __devinitdata =
 	"Broadcom NetXtreme II CNIC Driver " DRV_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
@@ -409,14 +410,13 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 	struct cnic_dev *dev;
 
 	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
-		printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
-		       ulp_type);
+		pr_err("%s: Bad type %d\n", __func__, ulp_type);
 		return -EINVAL;
 	}
 	mutex_lock(&cnic_lock);
 	if (cnic_ulp_tbl[ulp_type]) {
-		printk(KERN_ERR PFX "cnic_register_driver: Type %d has already "
-				    "been registered\n", ulp_type);
+		pr_err("%s: Type %d has already been registered\n",
+		       __func__, ulp_type);
 		mutex_unlock(&cnic_lock);
 		return -EBUSY;
 	}
@@ -455,15 +455,14 @@ int cnic_unregister_driver(int ulp_type)
 	int i = 0;
 
 	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
-		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
-		       ulp_type);
+		pr_err("%s: Bad type %d\n", __func__, ulp_type);
 		return -EINVAL;
 	}
 	mutex_lock(&cnic_lock);
 	ulp_ops = cnic_ulp_tbl[ulp_type];
 	if (!ulp_ops) {
-		printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
-				    "been registered\n", ulp_type);
+		pr_err("%s: Type %d has not been registered\n",
+		       __func__, ulp_type);
 		goto out_unlock;
 	}
 	read_lock(&cnic_dev_lock);
@@ -471,8 +470,8 @@ int cnic_unregister_driver(int ulp_type)
 		struct cnic_local *cp = dev->cnic_priv;
 
 		if (rcu_dereference(cp->ulp_ops[ulp_type])) {
-			printk(KERN_ERR PFX "cnic_unregister_driver: Type %d "
-			       "still has devices registered\n", ulp_type);
+			pr_err("%s: Type %d still has devices registered\n",
+			       __func__, ulp_type);
 			read_unlock(&cnic_dev_lock);
 			goto out_unlock;
 		}
@@ -492,8 +491,7 @@ int cnic_unregister_driver(int ulp_type)
 	}
 
 	if (atomic_read(&ulp_ops->ref_count) != 0)
-		printk(KERN_WARNING PFX "%s: Failed waiting for ref count to go"
-					" to zero.\n", dev->netdev->name);
+		netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n");
 	return 0;
 
 out_unlock:
@@ -511,20 +509,19 @@ static int cnic_register_device(struct cnic_dev *dev, int ulp_type,
 	struct cnic_ulp_ops *ulp_ops;
 
 	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
-		printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
-		       ulp_type);
+		pr_err("%s: Bad type %d\n", __func__, ulp_type);
 		return -EINVAL;
 	}
 	mutex_lock(&cnic_lock);
 	if (cnic_ulp_tbl[ulp_type] == NULL) {
-		printk(KERN_ERR PFX "cnic_register_device: Driver with type %d "
-				    "has not been registered\n", ulp_type);
+		pr_err("%s: Driver with type %d has not been registered\n",
+		       __func__, ulp_type);
 		mutex_unlock(&cnic_lock);
 		return -EAGAIN;
 	}
 	if (rcu_dereference(cp->ulp_ops[ulp_type])) {
-		printk(KERN_ERR PFX "cnic_register_device: Type %d has already "
-		       "been registered to this device\n", ulp_type);
+		pr_err("%s: Type %d has already been registered to this device\n",
+		       __func__, ulp_type);
 		mutex_unlock(&cnic_lock);
 		return -EBUSY;
 	}
@@ -552,8 +549,7 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
 	int i = 0;
 
 	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
-		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
-		       ulp_type);
+		pr_err("%s: Bad type %d\n", __func__, ulp_type);
 		return -EINVAL;
 	}
 	mutex_lock(&cnic_lock);
@@ -561,8 +557,8 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
 		rcu_assign_pointer(cp->ulp_ops[ulp_type], NULL);
 		cnic_put(dev);
 	} else {
-		printk(KERN_ERR PFX "cnic_unregister_device: device not "
-		       "registered to this ulp type %d\n", ulp_type);
+		pr_err("%s: device not registered to this ulp type %d\n",
+		       __func__, ulp_type);
 		mutex_unlock(&cnic_lock);
 		return -EINVAL;
 	}
@@ -576,8 +572,7 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
 		i++;
 	}
 	if (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]))
-		printk(KERN_WARNING PFX "%s: Failed waiting for ULP up call"
-					" to complete.\n", dev->netdev->name);
+		netdev_warn(dev->netdev, "Failed waiting for ULP up call to complete\n");
 
 	return 0;
 }
@@ -1865,8 +1860,7 @@ static int cnic_bnx2x_connect(struct cnic_dev *dev, struct kwqe *wqes[],
 	}
 
 	if (sizeof(*conn_buf) > CNIC_KWQ16_DATA_SIZE) {
-		printk(KERN_ERR PFX "%s: conn_buf size too big\n",
-			       dev->netdev->name);
+		netdev_err(dev->netdev, "conn_buf size too big\n");
 		return -ENOMEM;
 	}
 	conn_buf = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
@@ -2026,13 +2020,13 @@ static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
 			break;
 		default:
 			ret = 0;
-			printk(KERN_ERR PFX "%s: Unknown type of KWQE(0x%x)\n",
-			       dev->netdev->name, opcode);
+			netdev_err(dev->netdev, "Unknown type of KWQE(0x%x)\n",
+				   opcode);
 			break;
 		}
 		if (ret < 0)
-			printk(KERN_ERR PFX "%s: KWQE(0x%x) failed\n",
-			       dev->netdev->name, opcode);
+			netdev_err(dev->netdev, "KWQE(0x%x) failed\n",
+				   opcode);
 		i += work;
 	}
 	return 0;
@@ -2074,8 +2068,8 @@ static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
 			goto end;
 		else {
-			printk(KERN_ERR PFX "%s: Unknown type of KCQE(0x%x)\n",
-			       dev->netdev->name, kcqe_op_flag);
+			netdev_err(dev->netdev, "Unknown type of KCQE(0x%x)\n",
+				   kcqe_op_flag);
 			goto end;
 		}
 
@@ -3435,8 +3429,7 @@ static int cnic_init_bnx2_irq(struct cnic_dev *dev)
 	return 0;
 
 failed:
-	printk(KERN_ERR PFX "%s: " "KCQ index not resetting to 0.\n",
-	       dev->netdev->name);
+	netdev_err(dev->netdev, "KCQ index not resetting to 0\n");
 	return -EBUSY;
 }
 
@@ -3758,8 +3751,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev)
 
 	err = cnic_init_bnx2_irq(dev);
 	if (err) {
-		printk(KERN_ERR PFX "%s: cnic_init_irq failed\n",
-		       dev->netdev->name);
+		netdev_err(dev->netdev, "cnic_init_irq failed\n");
 		cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
 		cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
 		return err;
@@ -4122,8 +4114,7 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
 			   offsetof(struct cstorm_status_block_c,
 				    index_values[HC_INDEX_C_ISCSI_EQ_CONS]));
 	if (eq_idx != 0) {
-		printk(KERN_ERR PFX "%s: EQ cons index %x != 0\n",
-		       dev->netdev->name, eq_idx);
+		netdev_err(dev->netdev, "EQ cons index %x != 0\n", eq_idx);
 		return -EBUSY;
 	}
 	ret = cnic_init_bnx2x_irq(dev);
@@ -4208,8 +4199,7 @@ static int cnic_register_netdev(struct cnic_dev *dev)
 
 	err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
 	if (err)
-		printk(KERN_ERR PFX "%s: register_cnic failed\n",
-		       dev->netdev->name);
+		netdev_err(dev->netdev, "register_cnic failed\n");
 
 	return err;
 }
@@ -4243,8 +4233,7 @@ static int cnic_start_hw(struct cnic_dev *dev)
 
 	err = cp->alloc_resc(dev);
 	if (err) {
-		printk(KERN_ERR PFX "%s: allocate resource failure\n",
-		       dev->netdev->name);
+		netdev_err(dev->netdev, "allocate resource failure\n");
 		goto err1;
 	}
 
@@ -4326,10 +4315,9 @@ static void cnic_free_dev(struct cnic_dev *dev)
 		i++;
 	}
 	if (atomic_read(&dev->ref_count) != 0)
-		printk(KERN_ERR PFX "%s: Failed waiting for ref count to go"
-				    " to zero.\n", dev->netdev->name);
+		netdev_err(dev->netdev, "Failed waiting for ref count to go to zero\n");
 
-	printk(KERN_INFO PFX "Removed CNIC device: %s\n", dev->netdev->name);
+	netdev_info(dev->netdev, "Removed CNIC device\n");
 	dev_put(dev->netdev);
 	kfree(dev);
 }
@@ -4345,8 +4333,7 @@ static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
 
 	cdev = kzalloc(alloc_size , GFP_KERNEL);
 	if (cdev == NULL) {
-		printk(KERN_ERR PFX "%s: allocate dev struct failure\n",
-		       dev->name);
+		netdev_err(dev, "allocate dev struct failure\n");
 		return NULL;
 	}
 
@@ -4364,7 +4351,7 @@ static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
 
 	spin_lock_init(&cp->cnic_ulp_lock);
 
-	printk(KERN_INFO PFX "Added CNIC device: %s\n", dev->name);
+	netdev_info(dev, "Added CNIC device\n");
 
 	return cdev;
 }
@@ -4605,7 +4592,7 @@ static int __init cnic_init(void)
 {
 	int rc = 0;
 
-	printk(KERN_INFO "%s", version);
+	pr_info("%s", version);
 
 	rc = register_netdevice_notifier(&cnic_netdev_notifier);
 	if (rc) {
-- 
cgit v1.2.3


From 9cd31f078ee8b8dd68bbb39680b5c9a51f85f1ea Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:55 +0000
Subject: drivers/net/pci-skeleton.c: Use (pr|netdev|netif)_<level> macro
 helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Checkpatch cleaning
Convert formats like 0x%08x to %#08x
Remove periods from formats
Coalesce long formats
Use print_hex_dump

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pci-skeleton.c | 1019 ++++++++++++++++++++++----------------------
 1 file changed, 503 insertions(+), 516 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index bbdf0398c93f..11d4398eac94 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -11,7 +11,7 @@
 
 	-----<snip>-----
 
-        	Written 1997-2000 by Donald Becker.
+		Written 1997-2000 by Donald Becker.
 		This software may be used and distributed according to the
 		terms of the GNU General Public License (GPL), incorporated
 		herein by reference.  Drivers based on or derived from this
@@ -85,6 +85,8 @@ IVc. Errata
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -96,16 +98,15 @@ IVc. Errata
 #include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/crc32.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define NETDRV_VERSION		"1.0.1"
 #define MODNAME			"netdrv"
 #define NETDRV_DRIVER_LOAD_MSG	"MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
-#define PFX			MODNAME ": "
 
 static char version[] __devinitdata =
-KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-"  Support available from http://foo.com/bar/baz.html\n";
+	KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
+	"  Support available from http://foo.com/bar/baz.html\n";
 
 /* define to 1 to enable PIO instead of MMIO */
 #undef USE_IO_OPS
@@ -119,19 +120,24 @@ KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
 
 #ifdef NETDRV_DEBUG
 /* note: prints function name for you */
-#  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#define DPRINTK(fmt, args...)					\
+	printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
 #else
-#  define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)				\
+do {							\
+	if (0)						\
+		printk(KERN_DEBUG fmt, ##args);		\
+} while (0)
 #endif
 
 #ifdef NETDRV_NDEBUG
-#  define assert(expr) do {} while (0)
+#define assert(expr) do {} while (0)
 #else
-#  define assert(expr) \
-        if(!(expr)) {					\
-        printk( "Assertion failed! %s,%s,%s,line=%d\n",	\
-        #expr,__FILE__,__func__,__LINE__);		\
-        }
+#define assert(expr)						\
+	if (!(expr)) {						\
+		printk("Assertion failed! %s,%s,%s,line=%d\n",	\
+		       #expr, __FILE__, __func__, __LINE__);	\
+	}
 #endif
 
 
@@ -148,10 +154,10 @@ static int multicast_filter_limit = 32;
 
 /* Size of the in-memory receive ring. */
 #define RX_BUF_LEN_IDX	2	/* 0==8K, 1==16K, 2==32K, 3==64K */
-#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
-#define RX_BUF_PAD 16
+#define RX_BUF_LEN	(8192 << RX_BUF_LEN_IDX)
+#define RX_BUF_PAD	16
 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
-#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
 
 /* Number of Tx descriptor registers. */
 #define NUM_TX_DESC	4
@@ -165,9 +171,11 @@ static int multicast_filter_limit = 32;
 
 /* PCI Tuning Parameters
    Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
+#define TX_FIFO_THRESH	256	/* In bytes, rounded down to 32 byte units. */
 
-/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
+/* The following settings are log_2(bytes)-4:
+   0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet.
+*/
 #define RX_FIFO_THRESH	6	/* Rx buffer level before first PCI xfer.  */
 #define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
@@ -175,8 +183,7 @@ static int multicast_filter_limit = 32;
 
 /* Operational parameters that usually are not changed. */
 /* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT  (6*HZ)
-
+#define TX_TIMEOUT	(6 * HZ)
 
 enum {
 	HAS_CHIP_XCVR = 0x020000,
@@ -186,7 +193,7 @@ enum {
 #define NETDRV_MIN_IO_SIZE 0x80
 #define RTL8139B_IO_SIZE 256
 
-#define NETDRV_CAPS	HAS_CHIP_XCVR|HAS_LNK_CHNG
+#define NETDRV_CAPS	(HAS_CHIP_XCVR | HAS_LNK_CHNG)
 
 typedef enum {
 	RTL8139 = 0,
@@ -220,7 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
 	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
 	{0,}
 };
-MODULE_DEVICE_TABLE (pci, netdrv_pci_tbl);
+MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl);
 
 
 /* The rest of these values should never change. */
@@ -270,7 +277,7 @@ enum NETDRV_registers {
 enum ClearBitMasks {
 	MultiIntrClear = 0xF000,
 	ChipCmdClear = 0xE2,
-	Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+	Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1),
 };
 
 enum ChipCmdBits {
@@ -329,7 +336,7 @@ enum tx_config_bits {
 	TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
 	TxCRC = (1 << 16),	/* DISABLE appending CRC to end of Tx packets */
 	TxClearAbt = (1 << 0),	/* Clear abort (WO) */
-	TxDMAShift = 8,		/* DMA burst value (0-7) is shift this many bits */
+	TxDMAShift = 8,		/* DMA burst value(0-7) is shift this many bits */
 
 	TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
 };
@@ -481,41 +488,44 @@ struct netdrv_private {
 	chip_t chipset;
 };
 
-MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
 MODULE_LICENSE("GPL");
 module_param(multicast_filter_limit, int, 0);
 module_param(max_interrupt_work, int, 0);
 module_param_array(media, int, NULL, 0);
-MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
-MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
-
-static int read_eeprom (void *ioaddr, int location, int addr_len);
-static int netdrv_open (struct net_device *dev);
-static int mdio_read (struct net_device *dev, int phy_id, int location);
-static void mdio_write (struct net_device *dev, int phy_id, int location,
-			int val);
-static void netdrv_timer (unsigned long data);
-static void netdrv_tx_timeout (struct net_device *dev);
-static void netdrv_init_ring (struct net_device *dev);
-static int netdrv_start_xmit (struct sk_buff *skb,
-			       struct net_device *dev);
-static irqreturn_t netdrv_interrupt (int irq, void *dev_instance);
-static int netdrv_close (struct net_device *dev);
-static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
-static void netdrv_set_rx_mode (struct net_device *dev);
-static void netdrv_hw_start (struct net_device *dev);
+MODULE_PARM_DESC(multicast_filter_limit,
+		 MODNAME " maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(max_interrupt_work,
+		 MODNAME " maximum events handled per interrupt");
+MODULE_PARM_DESC(media,
+		 MODNAME " Bits 0-3: media type, bit 17: full duplex");
+
+static int read_eeprom(void *ioaddr, int location, int addr_len);
+static int netdrv_open(struct net_device *dev);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location,
+		       int val);
+static void netdrv_timer(unsigned long data);
+static void netdrv_tx_timeout(struct net_device *dev);
+static void netdrv_init_ring(struct net_device *dev);
+static int netdrv_start_xmit(struct sk_buff *skb,
+			     struct net_device *dev);
+static irqreturn_t netdrv_interrupt(int irq, void *dev_instance);
+static int netdrv_close(struct net_device *dev);
+static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void netdrv_set_rx_mode(struct net_device *dev);
+static void netdrv_hw_start(struct net_device *dev);
 
 
 #ifdef USE_IO_OPS
 
-#define NETDRV_R8(reg)		inb (((unsigned long)ioaddr) + (reg))
-#define NETDRV_R16(reg)		inw (((unsigned long)ioaddr) + (reg))
-#define NETDRV_R32(reg)		((unsigned long) inl (((unsigned long)ioaddr) + (reg)))
-#define NETDRV_W8(reg, val8)	outb ((val8), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W16(reg, val16)	outw ((val16), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W32(reg, val32)	outl ((val32), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_R8(reg)		inb(((unsigned long)ioaddr) + (reg))
+#define NETDRV_R16(reg)		inw(((unsigned long)ioaddr) + (reg))
+#define NETDRV_R32(reg)		((unsigned long)inl(((unsigned long)ioaddr) + (reg)))
+#define NETDRV_W8(reg, val8)	outb((val8), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W16(reg, val16)	outw((val16), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W32(reg, val32)	outl((val32), ((unsigned long)ioaddr) + (reg))
 #define NETDRV_W8_F		NETDRV_W8
 #define NETDRV_W16_F		NETDRV_W16
 #define NETDRV_W32_F		NETDRV_W32
@@ -528,25 +538,37 @@ static void netdrv_hw_start (struct net_device *dev);
 #define readb(addr) inb((unsigned long)(addr))
 #define readw(addr) inw((unsigned long)(addr))
 #define readl(addr) inl((unsigned long)(addr))
-#define writeb(val,addr) outb((val),(unsigned long)(addr))
-#define writew(val,addr) outw((val),(unsigned long)(addr))
-#define writel(val,addr) outl((val),(unsigned long)(addr))
+#define writeb(val, addr) outb((val), (unsigned long)(addr))
+#define writew(val, addr) outw((val), (unsigned long)(addr))
+#define writel(val, addr) outl((val), (unsigned long)(addr))
 
 #else
 
 /* write MMIO register, with flush */
 /* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define NETDRV_W8_F(reg, val8)	do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0)
-#define NETDRV_W16_F(reg, val16)	do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0)
-#define NETDRV_W32_F(reg, val32)	do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0)
+#define NETDRV_W8_F(reg, val8)			\
+do {						\
+	writeb((val8), ioaddr + (reg));		\
+	readb(ioaddr + (reg));			\
+} while (0)
+#define NETDRV_W16_F(reg, val16)		\
+do {						\
+	writew((val16), ioaddr + (reg));	\
+	readw(ioaddr + (reg));			\
+} while (0)
+#define NETDRV_W32_F(reg, val32)		\
+do {						\
+	writel((val32), ioaddr + (reg));	\
+	readl(ioaddr + (reg));			\
+} while (0)
 
 
 #ifdef MMIO_FLUSH_AUDIT_COMPLETE
 
 /* write MMIO register */
-#define NETDRV_W8(reg, val8)	writeb ((val8), ioaddr + (reg))
-#define NETDRV_W16(reg, val16)	writew ((val16), ioaddr + (reg))
-#define NETDRV_W32(reg, val32)	writel ((val32), ioaddr + (reg))
+#define NETDRV_W8(reg, val8)	writeb((val8), ioaddr + (reg))
+#define NETDRV_W16(reg, val16)	writew((val16), ioaddr + (reg))
+#define NETDRV_W32(reg, val32)	writel((val32), ioaddr + (reg))
 
 #else
 
@@ -558,9 +580,9 @@ static void netdrv_hw_start (struct net_device *dev);
 #endif /* MMIO_FLUSH_AUDIT_COMPLETE */
 
 /* read MMIO register */
-#define NETDRV_R8(reg)		readb (ioaddr + (reg))
-#define NETDRV_R16(reg)		readw (ioaddr + (reg))
-#define NETDRV_R32(reg)		((unsigned long) readl (ioaddr + (reg)))
+#define NETDRV_R8(reg)		readb(ioaddr + (reg))
+#define NETDRV_R16(reg)		readw(ioaddr + (reg))
+#define NETDRV_R32(reg)		((unsigned long) readl(ioaddr + (reg)))
 
 #endif /* USE_IO_OPS */
 
@@ -570,14 +592,14 @@ static const u16 netdrv_intr_mask =
 	TxErr | TxOK | RxErr | RxOK;
 
 static const unsigned int netdrv_rx_config =
-	  RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
-	  (RX_FIFO_THRESH << RxCfgFIFOShift) |
-	  (RX_DMA_BURST << RxCfgDMAShift);
+	RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
 
 
-static int __devinit netdrv_init_board (struct pci_dev *pdev,
-					 struct net_device **dev_out,
-					 void **ioaddr_out)
+static int __devinit netdrv_init_board(struct pci_dev *pdev,
+				       struct net_device **dev_out,
+				       void **ioaddr_out)
 {
 	void *ioaddr = NULL;
 	struct net_device *dev;
@@ -587,43 +609,43 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
 	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
 	u32 tmp;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	assert (pdev != NULL);
-	assert (ioaddr_out != NULL);
+	assert(pdev != NULL);
+	assert(ioaddr_out != NULL);
 
 	*ioaddr_out = NULL;
 	*dev_out = NULL;
 
 	/* dev zeroed in alloc_etherdev */
-	dev = alloc_etherdev (sizeof (*tp));
+	dev = alloc_etherdev(sizeof(*tp));
 	if (dev == NULL) {
 		dev_err(&pdev->dev, "unable to alloc new ethernet\n");
-		DPRINTK ("EXIT, returning -ENOMEM\n");
+		DPRINTK("EXIT, returning -ENOMEM\n");
 		return -ENOMEM;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	tp = netdev_priv(dev);
 
-	/* enable device (incl. PCI PM wakeup), and bus-mastering */
-	rc = pci_enable_device (pdev);
+	/* enable device(incl. PCI PM wakeup), and bus-mastering */
+	rc = pci_enable_device(pdev);
 	if (rc)
 		goto err_out;
 
-	pio_start = pci_resource_start (pdev, 0);
-	pio_end = pci_resource_end (pdev, 0);
-	pio_flags = pci_resource_flags (pdev, 0);
-	pio_len = pci_resource_len (pdev, 0);
+	pio_start = pci_resource_start(pdev, 0);
+	pio_end = pci_resource_end(pdev, 0);
+	pio_flags = pci_resource_flags(pdev, 0);
+	pio_len = pci_resource_len(pdev, 0);
 
-	mmio_start = pci_resource_start (pdev, 1);
-	mmio_end = pci_resource_end (pdev, 1);
-	mmio_flags = pci_resource_flags (pdev, 1);
-	mmio_len = pci_resource_len (pdev, 1);
+	mmio_start = pci_resource_start(pdev, 1);
+	mmio_end = pci_resource_end(pdev, 1);
+	mmio_flags = pci_resource_flags(pdev, 1);
+	mmio_len = pci_resource_len(pdev, 1);
 
 	/* set this immediately, we need to know before
 	 * we talk to the chip directly */
-	DPRINTK("PIO region size == 0x%02X\n", pio_len);
-	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+	DPRINTK("PIO region size == %#02X\n", pio_len);
+	DPRINTK("MMIO region size == %#02lX\n", mmio_len);
 
 	/* make sure PCI base addr 0 is PIO */
 	if (!(pio_flags & IORESOURCE_IO)) {
@@ -647,17 +669,17 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	rc = pci_request_regions (pdev, MODNAME);
+	rc = pci_request_regions(pdev, MODNAME);
 	if (rc)
 		goto err_out;
 
-	pci_set_master (pdev);
+	pci_set_master(pdev);
 
 #ifdef USE_IO_OPS
-	ioaddr = (void *) pio_start;
+	ioaddr = (void *)pio_start;
 #else
 	/* ioremap MMIO region */
-	ioaddr = ioremap (mmio_start, mmio_len);
+	ioaddr = ioremap(mmio_start, mmio_len);
 	if (ioaddr == NULL) {
 		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
 		rc = -EIO;
@@ -666,52 +688,50 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
 #endif /* USE_IO_OPS */
 
 	/* Soft reset the chip. */
-	NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset);
+	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
 
 	/* Check that the chip has finished the reset. */
 	for (i = 1000; i > 0; i--)
-		if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0)
+		if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
 			break;
 		else
-			udelay (10);
+			udelay(10);
 
 	/* Bring the chip out of low-power mode. */
 	/* <insert device-specific code here> */
 
 #ifndef USE_IO_OPS
 	/* sanity checks -- ensure PIO and MMIO registers agree */
-	assert (inb (pio_start+Config0) == readb (ioaddr+Config0));
-	assert (inb (pio_start+Config1) == readb (ioaddr+Config1));
-	assert (inb (pio_start+TxConfig) == readb (ioaddr+TxConfig));
-	assert (inb (pio_start+RxConfig) == readb (ioaddr+RxConfig));
+	assert(inb(pio_start+Config0) == readb(ioaddr+Config0));
+	assert(inb(pio_start+Config1) == readb(ioaddr+Config1));
+	assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig));
+	assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig));
 #endif /* !USE_IO_OPS */
 
 	/* identify chip attached to board */
-	tmp = NETDRV_R8 (ChipVersion);
-	for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--)
+	tmp = NETDRV_R8(ChipVersion);
+	for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
 		if (tmp == rtl_chip_info[i].version) {
 			tp->chipset = i;
 			goto match;
 		}
 
 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	dev_printk (KERN_DEBUG, &pdev->dev,
-		"unknown chip version, assuming RTL-8139\n");
-	dev_printk (KERN_DEBUG, &pdev->dev, "TxConfig = 0x%lx\n",
-		NETDRV_R32 (TxConfig));
+	dev_printk(KERN_DEBUG, &pdev->dev,
+		   "unknown chip version, assuming RTL-8139\n");
+	dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n",
+		   NETDRV_R32(TxConfig));
 	tp->chipset = 0;
 
 match:
-	DPRINTK ("chipset id (%d) == index %d, '%s'\n",
-		tmp,
-		tp->chipset,
-		rtl_chip_info[tp->chipset].name);
+	DPRINTK("chipset id(%d) == index %d, '%s'\n",
+		tmp, tp->chipset, rtl_chip_info[tp->chipset].name);
 
-	rc = register_netdev (dev);
+	rc = register_netdev(dev);
 	if (rc)
 		goto err_out_unmap;
 
-	DPRINTK ("EXIT, returning 0\n");
+	DPRINTK("EXIT, returning 0\n");
 	*ioaddr_out = ioaddr;
 	*dev_out = dev;
 	return 0;
@@ -721,10 +741,10 @@ err_out_unmap:
 	iounmap(ioaddr);
 err_out_free_res:
 #endif
-	pci_release_regions (pdev);
+	pci_release_regions(pdev);
 err_out:
-	free_netdev (dev);
-	DPRINTK ("EXIT, returning %d\n", rc);
+	free_netdev(dev);
+	DPRINTK("EXIT, returning %d\n", rc);
 	return rc;
 }
 
@@ -740,8 +760,8 @@ static const struct net_device_ops netdrv_netdev_ops = {
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __devinit netdrv_init_one (struct pci_dev *pdev,
-				       const struct pci_device_id *ent)
+static int __devinit netdrv_init_one(struct pci_dev *pdev,
+				     const struct pci_device_id *ent)
 {
 	struct net_device *dev = NULL;
 	struct netdrv_private *tp;
@@ -756,29 +776,29 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
 		printk(version);
 #endif
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	assert (pdev != NULL);
-	assert (ent != NULL);
+	assert(pdev != NULL);
+	assert(ent != NULL);
 
 	board_idx++;
 
-	i = netdrv_init_board (pdev, &dev, &ioaddr);
+	i = netdrv_init_board(pdev, &dev, &ioaddr);
 	if (i < 0) {
-		DPRINTK ("EXIT, returning %d\n", i);
+		DPRINTK("EXIT, returning %d\n", i);
 		return i;
 	}
 
 	tp = netdev_priv(dev);
 
-	assert (ioaddr != NULL);
-	assert (dev != NULL);
-	assert (tp != NULL);
+	assert(ioaddr != NULL);
+	assert(dev != NULL);
+	assert(tp != NULL);
 
-	addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+	addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6;
 	for (i = 0; i < 3; i++)
-		((u16 *) (dev->dev_addr))[i] =
-		    le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
+		((u16 *)(dev->dev_addr))[i] =
+			le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len));
 
 	dev->netdev_ops = &netdrv_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
@@ -791,7 +811,7 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
 
 	/* note: tp->chipset set in netdrv_init_board */
 	tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER | NETDRV_CAPS;
+		PCI_COMMAND_MASTER | NETDRV_CAPS;
 	tp->pci_dev = pdev;
 	tp->board = ent->driver_data;
 	tp->mmio_addr = ioaddr;
@@ -801,18 +821,15 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
 
 	tp->phys[0] = 32;
 
-	printk (KERN_INFO "%s: %s at 0x%lx, %pM IRQ %d\n",
-		dev->name,
-		board_info[ent->driver_data].name,
-		dev->base_addr,
-		dev->dev_addr,
-		dev->irq);
+	netdev_info(dev, "%s at %#lx, %pM IRQ %d\n",
+		    board_info[ent->driver_data].name,
+		    dev->base_addr, dev->dev_addr, dev->irq);
 
-	printk (KERN_DEBUG "%s:  Identified 8139 chip type '%s'\n",
-		dev->name, rtl_chip_info[tp->chipset].name);
+	netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n",
+		      rtl_chip_info[tp->chipset].name);
 
 	/* Put the chip into low-power mode. */
-	NETDRV_W8_F (Cfg9346, Cfg9346_Unlock);
+	NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
 
 	/* The lower four bits are the media type. */
 	option = (board_idx > 7) ? 0 : media[board_idx];
@@ -824,45 +841,43 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
 	}
 
 	if (tp->full_duplex) {
-		printk (KERN_INFO
-			"%s: Media type forced to Full Duplex.\n",
-			dev->name);
-		mdio_write (dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
+		netdev_info(dev, "Media type forced to Full Duplex\n");
+		mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
 		tp->duplex_lock = 1;
 	}
 
-	DPRINTK ("EXIT - returning 0\n");
+	DPRINTK("EXIT - returning 0\n");
 	return 0;
 }
 
 
-static void __devexit netdrv_remove_one (struct pci_dev *pdev)
+static void __devexit netdrv_remove_one(struct pci_dev *pdev)
 {
-	struct net_device *dev = pci_get_drvdata (pdev);
+	struct net_device *dev = pci_get_drvdata(pdev);
 	struct netdrv_private *np;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	assert (dev != NULL);
+	assert(dev != NULL);
 
 	np = netdev_priv(dev);
-	assert (np != NULL);
+	assert(np != NULL);
 
-	unregister_netdev (dev);
+	unregister_netdev(dev);
 
 #ifndef USE_IO_OPS
-	iounmap (np->mmio_addr);
+	iounmap(np->mmio_addr);
 #endif /* !USE_IO_OPS */
 
-	pci_release_regions (pdev);
+	pci_release_regions(pdev);
 
-	free_netdev (dev);
+	free_netdev(dev);
 
-	pci_set_drvdata (pdev, NULL);
+	pci_set_drvdata(pdev, NULL);
 
-	pci_disable_device (pdev);
+	pci_disable_device(pdev);
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 }
 
 
@@ -870,63 +885,63 @@ static void __devexit netdrv_remove_one (struct pci_dev *pdev)
 
 /*  EEPROM_Ctrl bits. */
 #define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
-#define EE_CS			0x08	/* EEPROM chip select. */
+#define EE_CS		0x08	/* EEPROM chip select. */
 #define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
-#define EE_WRITE_0		0x00
-#define EE_WRITE_1		0x02
+#define EE_WRITE_0	0x00
+#define EE_WRITE_1	0x02
 #define EE_DATA_READ	0x01	/* EEPROM chip data out. */
-#define EE_ENB			(0x80 | EE_CS)
+#define EE_ENB		(0x80 | EE_CS)
 
 /* Delay between EEPROM clock transitions.
    No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
- */
+*/
 
 #define eeprom_delay()	readl(ee_addr)
 
 /* The EEPROM commands include the alway-set leading bit. */
 #define EE_WRITE_CMD	(5)
-#define EE_READ_CMD		(6)
+#define EE_READ_CMD	(6)
 #define EE_ERASE_CMD	(7)
 
-static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
+static int __devinit read_eeprom(void *ioaddr, int location, int addr_len)
 {
 	int i;
 	unsigned retval = 0;
 	void *ee_addr = ioaddr + Cfg9346;
 	int read_cmd = location | (EE_READ_CMD << addr_len);
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	writeb (EE_ENB & ~EE_CS, ee_addr);
-	writeb (EE_ENB, ee_addr);
-	eeprom_delay ();
+	writeb(EE_ENB & ~EE_CS, ee_addr);
+	writeb(EE_ENB, ee_addr);
+	eeprom_delay();
 
 	/* Shift the read command bits out. */
 	for (i = 4 + addr_len; i >= 0; i--) {
 		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
-		writeb (EE_ENB | dataval, ee_addr);
-		eeprom_delay ();
-		writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
-		eeprom_delay ();
+		writeb(EE_ENB | dataval, ee_addr);
+		eeprom_delay();
+		writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay();
 	}
-	writeb (EE_ENB, ee_addr);
-	eeprom_delay ();
+	writeb(EE_ENB, ee_addr);
+	eeprom_delay();
 
 	for (i = 16; i > 0; i--) {
-		writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
-		eeprom_delay ();
+		writeb(EE_ENB | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay();
 		retval =
-		    (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 :
-				     0);
-		writeb (EE_ENB, ee_addr);
-		eeprom_delay ();
+			(retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 :
+					0);
+		writeb(EE_ENB, ee_addr);
+		eeprom_delay();
 	}
 
 	/* Terminate the EEPROM access. */
-	writeb (~EE_CS, ee_addr);
-	eeprom_delay ();
+	writeb(~EE_CS, ee_addr);
+	eeprom_delay();
 
-	DPRINTK ("EXIT - returning %d\n", retval);
+	DPRINTK("EXIT - returning %d\n", retval);
 	return retval;
 }
 
@@ -936,12 +951,12 @@ static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
    The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
    met by back-to-back PCI I/O cycles, but we insert a delay to avoid
    "overclocking" issues. */
-#define MDIO_DIR		0x80
+#define MDIO_DIR	0x80
 #define MDIO_DATA_OUT	0x04
 #define MDIO_DATA_IN	0x02
-#define MDIO_CLK		0x01
-#define MDIO_WRITE0 (MDIO_DIR)
-#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+#define MDIO_CLK	0x01
+#define MDIO_WRITE0	(MDIO_DIR)
+#define MDIO_WRITE1	(MDIO_DIR | MDIO_DATA_OUT)
 
 #define mdio_delay()	readb(mdio_addr)
 
@@ -959,24 +974,24 @@ static char mii_2_8139_map[8] = {
 
 
 /* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync (void *mdio_addr)
+static void mdio_sync(void *mdio_addr)
 {
 	int i;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
 	for (i = 32; i >= 0; i--) {
-		writeb (MDIO_WRITE1, mdio_addr);
-		mdio_delay ();
-		writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr);
-		mdio_delay ();
+		writeb(MDIO_WRITE1, mdio_addr);
+		mdio_delay();
+		writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr);
+		mdio_delay();
 	}
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 }
 
 
-static int mdio_read (struct net_device *dev, int phy_id, int location)
+static int mdio_read(struct net_device *dev, int phy_id, int location)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *mdio_addr = tp->mmio_addr + Config4;
@@ -984,97 +999,94 @@ static int mdio_read (struct net_device *dev, int phy_id, int location)
 	int retval = 0;
 	int i;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
 	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
-		DPRINTK ("EXIT after directly using 8139 internal regs\n");
+		DPRINTK("EXIT after directly using 8139 internal regs\n");
 		return location < 8 && mii_2_8139_map[location] ?
-		    readw (tp->mmio_addr + mii_2_8139_map[location]) : 0;
+			readw(tp->mmio_addr + mii_2_8139_map[location]) : 0;
 	}
-	mdio_sync (mdio_addr);
+	mdio_sync(mdio_addr);
 	/* Shift the read command bits out. */
 	for (i = 15; i >= 0; i--) {
 		int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
 
-		writeb (MDIO_DIR | dataval, mdio_addr);
-		mdio_delay ();
-		writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
-		mdio_delay ();
+		writeb(MDIO_DIR | dataval, mdio_addr);
+		mdio_delay();
+		writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
+		mdio_delay();
 	}
 
 	/* Read the two transition, 16 data, and wire-idle bits. */
 	for (i = 19; i > 0; i--) {
-		writeb (0, mdio_addr);
-		mdio_delay ();
-		retval =
-		    (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1
-				     : 0);
-		writeb (MDIO_CLK, mdio_addr);
-		mdio_delay ();
+		writeb(0, mdio_addr);
+		mdio_delay();
+		retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN))
+			  ? 1 : 0);
+		writeb(MDIO_CLK, mdio_addr);
+		mdio_delay();
 	}
 
-	DPRINTK ("EXIT, returning %d\n", (retval >> 1) & 0xffff);
+	DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff);
 	return (retval >> 1) & 0xffff;
 }
 
 
-static void mdio_write (struct net_device *dev, int phy_id, int location,
-			int value)
+static void mdio_write(struct net_device *dev, int phy_id, int location,
+		       int value)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *mdio_addr = tp->mmio_addr + Config4;
 	int mii_cmd =
-	    (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+		(0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
 	int i;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
 	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
 		if (location < 8 && mii_2_8139_map[location]) {
-			writew (value,
-				tp->mmio_addr + mii_2_8139_map[location]);
-			readw (tp->mmio_addr + mii_2_8139_map[location]);
+			writew(value,
+			       tp->mmio_addr + mii_2_8139_map[location]);
+			readw(tp->mmio_addr + mii_2_8139_map[location]);
 		}
-		DPRINTK ("EXIT after directly using 8139 internal regs\n");
+		DPRINTK("EXIT after directly using 8139 internal regs\n");
 		return;
 	}
-	mdio_sync (mdio_addr);
+	mdio_sync(mdio_addr);
 
 	/* Shift the command bits out. */
 	for (i = 31; i >= 0; i--) {
 		int dataval =
-		    (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
-		writeb (dataval, mdio_addr);
-		mdio_delay ();
-		writeb (dataval | MDIO_CLK, mdio_addr);
-		mdio_delay ();
+			(mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+		writeb(dataval, mdio_addr);
+		mdio_delay();
+		writeb(dataval | MDIO_CLK, mdio_addr);
+		mdio_delay();
 	}
 
 	/* Clear out extra bits. */
 	for (i = 2; i > 0; i--) {
-		writeb (0, mdio_addr);
-		mdio_delay ();
-		writeb (MDIO_CLK, mdio_addr);
-		mdio_delay ();
+		writeb(0, mdio_addr);
+		mdio_delay();
+		writeb(MDIO_CLK, mdio_addr);
+		mdio_delay();
 	}
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 }
 
 
-static int netdrv_open (struct net_device *dev)
+static int netdrv_open(struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	int retval;
-#ifdef NETDRV_DEBUG
 	void *ioaddr = tp->mmio_addr;
-#endif
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	retval = request_irq (dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
+	retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
 	if (retval) {
-		DPRINTK ("EXIT, returning %d\n", retval);
+		DPRINTK("EXIT, returning %d\n", retval);
 		return retval;
 	}
 
@@ -1092,7 +1104,7 @@ static int netdrv_open (struct net_device *dev)
 			pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
 					    tp->rx_ring, tp->rx_ring_dma);
 
-		DPRINTK ("EXIT, returning -ENOMEM\n");
+		DPRINTK("EXIT, returning -ENOMEM\n");
 		return -ENOMEM;
 
 	}
@@ -1100,109 +1112,108 @@ static int netdrv_open (struct net_device *dev)
 	tp->full_duplex = tp->duplex_lock;
 	tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
 
-	netdrv_init_ring (dev);
-	netdrv_hw_start (dev);
+	netdrv_init_ring(dev);
+	netdrv_hw_start(dev);
 
-	DPRINTK ("%s: netdrv_open() ioaddr %#lx IRQ %d"
-			" GP Pins %2.2x %s-duplex.\n",
-			dev->name, pci_resource_start (tp->pci_dev, 1),
-			dev->irq, NETDRV_R8 (MediaStatus),
-			tp->full_duplex ? "full" : "half");
+	netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
+		   (unsigned long long)pci_resource_start(tp->pci_dev, 1),
+		   dev->irq, NETDRV_R8(MediaStatus),
+		   tp->full_duplex ? "full" : "half");
 
 	/* Set the timer to switch to check for link beat and perhaps switch
 	   to an alternate media type. */
-	init_timer (&tp->timer);
+	init_timer(&tp->timer);
 	tp->timer.expires = jiffies + 3 * HZ;
 	tp->timer.data = (unsigned long) dev;
 	tp->timer.function = &netdrv_timer;
-	add_timer (&tp->timer);
+	add_timer(&tp->timer);
 
-	DPRINTK ("EXIT, returning 0\n");
+	DPRINTK("EXIT, returning 0\n");
 	return 0;
 }
 
 
 /* Start the hardware at open or resume. */
-static void netdrv_hw_start (struct net_device *dev)
+static void netdrv_hw_start(struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	u32 i;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
 	/* Soft reset the chip. */
-	NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset);
-	udelay (100);
+	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
+	udelay(100);
 
 	/* Check that the chip has finished the reset. */
 	for (i = 1000; i > 0; i--)
-		if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0)
+		if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
 			break;
 
 	/* Restore our idea of the MAC address. */
-	NETDRV_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
-	NETDRV_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+	NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0)));
+	NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4)));
 
 	/* Must enable Tx/Rx before setting transfer thresholds! */
-	NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) |
-			   CmdRxEnb | CmdTxEnb);
+	NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
+		    CmdRxEnb | CmdTxEnb);
 
 	i = netdrv_rx_config |
-	    (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
-	NETDRV_W32_F (RxConfig, i);
+		(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+	NETDRV_W32_F(RxConfig, i);
 
 	/* Check this value: the documentation for IFG contradicts ifself. */
-	NETDRV_W32 (TxConfig, (TX_DMA_BURST << TxDMAShift));
+	NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift));
 
 	/* unlock Config[01234] and BMCR register writes */
-	NETDRV_W8_F (Cfg9346, Cfg9346_Unlock);
-	udelay (10);
+	NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
+	udelay(10);
 
 	tp->cur_rx = 0;
 
 	/* Lock Config[01234] and BMCR register writes */
-	NETDRV_W8_F (Cfg9346, Cfg9346_Lock);
-	udelay (10);
+	NETDRV_W8_F(Cfg9346, Cfg9346_Lock);
+	udelay(10);
 
 	/* init Rx ring buffer DMA address */
-	NETDRV_W32_F (RxBuf, tp->rx_ring_dma);
+	NETDRV_W32_F(RxBuf, tp->rx_ring_dma);
 
 	/* init Tx buffer DMA addresses */
 	for (i = 0; i < NUM_TX_DESC; i++)
-		NETDRV_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+		NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
 
-	NETDRV_W32_F (RxMissed, 0);
+	NETDRV_W32_F(RxMissed, 0);
 
-	netdrv_set_rx_mode (dev);
+	netdrv_set_rx_mode(dev);
 
 	/* no early-rx interrupts */
-	NETDRV_W16 (MultiIntr, NETDRV_R16 (MultiIntr) & MultiIntrClear);
+	NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear);
 
 	/* make sure RxTx has started */
-	NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) |
-			   CmdRxEnb | CmdTxEnb);
+	NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
+		    CmdRxEnb | CmdTxEnb);
 
 	/* Enable all known interrupts by setting the interrupt mask. */
-	NETDRV_W16_F (IntrMask, netdrv_intr_mask);
+	NETDRV_W16_F(IntrMask, netdrv_intr_mask);
 
-	netif_start_queue (dev);
+	netif_start_queue(dev);
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 }
 
 
 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void netdrv_init_ring (struct net_device *dev)
+static void netdrv_init_ring(struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	int i;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
 	tp->cur_rx = 0;
-	atomic_set (&tp->cur_tx, 0);
-	atomic_set (&tp->dirty_tx, 0);
+	atomic_set(&tp->cur_tx, 0);
+	atomic_set(&tp->dirty_tx, 0);
 
 	for (i = 0; i < NUM_TX_DESC; i++) {
 		tp->tx_info[i].skb = NULL;
@@ -1210,11 +1221,11 @@ static void netdrv_init_ring (struct net_device *dev)
 		tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
 	}
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 }
 
 
-static void netdrv_timer (unsigned long data)
+static void netdrv_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *) data;
 	struct netdrv_private *tp = netdev_priv(dev);
@@ -1222,58 +1233,54 @@ static void netdrv_timer (unsigned long data)
 	int next_tick = 60 * HZ;
 	int mii_lpa;
 
-	mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+	mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA);
 
 	if (!tp->duplex_lock && mii_lpa != 0xffff) {
 		int duplex = ((mii_lpa & LPA_100FULL) ||
-			      (mii_lpa & 0x01C0) == 0x0040);
+			     (mii_lpa & 0x01C0) == 0x0040);
 		if (tp->full_duplex != duplex) {
 			tp->full_duplex = duplex;
-			printk (KERN_INFO
-				"%s: Setting %s-duplex based on MII #%d link"
-				" partner ability of %4.4x.\n", dev->name,
-				tp->full_duplex ? "full" : "half",
-				tp->phys[0], mii_lpa);
-			NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
-			NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20);
-			NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+			netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
+				    tp->full_duplex ? "full" : "half",
+				    tp->phys[0], mii_lpa);
+			NETDRV_W8(Cfg9346, Cfg9346_Unlock);
+			NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
+			NETDRV_W8(Cfg9346, Cfg9346_Lock);
 		}
 	}
 
-	DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
-		 dev->name, NETDRV_R16 (NWayLPAR));
-	DPRINTK ("%s:  Other registers are IntMask %4.4x IntStatus %4.4x"
-		 " RxStatus %4.4x.\n", dev->name,
-		 NETDRV_R16 (IntrMask),
-		 NETDRV_R16 (IntrStatus),
-		 NETDRV_R32 (RxEarlyStatus));
-	DPRINTK ("%s:  Chip config %2.2x %2.2x.\n",
-		 dev->name, NETDRV_R8 (Config0),
-		 NETDRV_R8 (Config1));
+	netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
+		   NETDRV_R16(NWayLPAR));
+	netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n",
+		   NETDRV_R16(IntrMask),
+		   NETDRV_R16(IntrStatus),
+		   NETDRV_R32(RxEarlyStatus));
+	netdev_dbg(dev, "Chip config %02x %02x\n",
+		   NETDRV_R8(Config0), NETDRV_R8(Config1));
 
 	tp->timer.expires = jiffies + next_tick;
-	add_timer (&tp->timer);
+	add_timer(&tp->timer);
 }
 
 
-static void netdrv_tx_clear (struct net_device *dev)
+static void netdrv_tx_clear(struct net_device *dev)
 {
 	int i;
 	struct netdrv_private *tp = netdev_priv(dev);
 
-	atomic_set (&tp->cur_tx, 0);
-	atomic_set (&tp->dirty_tx, 0);
+	atomic_set(&tp->cur_tx, 0);
+	atomic_set(&tp->dirty_tx, 0);
 
 	/* Dump the unsent Tx packets. */
 	for (i = 0; i < NUM_TX_DESC; i++) {
 		struct ring_info *rp = &tp->tx_info[i];
 		if (rp->mapping != 0) {
-			pci_unmap_single (tp->pci_dev, rp->mapping,
-					  rp->skb->len, PCI_DMA_TODEVICE);
+			pci_unmap_single(tp->pci_dev, rp->mapping,
+					 rp->skb->len, PCI_DMA_TODEVICE);
 			rp->mapping = 0;
 		}
 		if (rp->skb) {
-			dev_kfree_skb (rp->skb);
+			dev_kfree_skb(rp->skb);
 			rp->skb = NULL;
 			dev->stats.tx_dropped++;
 		}
@@ -1281,7 +1288,7 @@ static void netdrv_tx_clear (struct net_device *dev)
 }
 
 
-static void netdrv_tx_timeout (struct net_device *dev)
+static void netdrv_tx_timeout(struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
@@ -1289,96 +1296,95 @@ static void netdrv_tx_timeout (struct net_device *dev)
 	u8 tmp8;
 	unsigned long flags;
 
-	DPRINTK ("%s: Transmit timeout, status %2.2x %4.4x "
-		 "media %2.2x.\n", dev->name,
-		 NETDRV_R8 (ChipCmd),
-		 NETDRV_R16 (IntrStatus),
-		 NETDRV_R8 (MediaStatus));
+	netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n",
+		   NETDRV_R8(ChipCmd),
+		   NETDRV_R16(IntrStatus),
+		   NETDRV_R8(MediaStatus));
 
 	/* disable Tx ASAP, if not already */
-	tmp8 = NETDRV_R8 (ChipCmd);
+	tmp8 = NETDRV_R8(ChipCmd);
 	if (tmp8 & CmdTxEnb)
-		NETDRV_W8 (ChipCmd, tmp8 & ~CmdTxEnb);
+		NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb);
 
 	/* Disable interrupts by clearing the interrupt mask. */
-	NETDRV_W16 (IntrMask, 0x0000);
+	NETDRV_W16(IntrMask, 0x0000);
 
 	/* Emit info to figure out what went wrong. */
-	printk (KERN_DEBUG "%s: Tx queue start entry %d  dirty entry %d.\n",
-		dev->name, atomic_read (&tp->cur_tx),
-		atomic_read (&tp->dirty_tx));
+	netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n",
+		   atomic_read(&tp->cur_tx),
+		   atomic_read(&tp->dirty_tx));
 	for (i = 0; i < NUM_TX_DESC; i++)
-		printk (KERN_DEBUG "%s:  Tx descriptor %d is %8.8lx.%s\n",
-			dev->name, i, NETDRV_R32 (TxStatus0 + (i * 4)),
-			i == atomic_read (&tp->dirty_tx) % NUM_TX_DESC ?
-				" (queue head)" : "");
+		netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
+			   i, NETDRV_R32(TxStatus0 + (i * 4)),
+			   i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ?
+			   "(queue head)" : "");
 
 	/* Stop a shared interrupt from scavenging while we are. */
-	spin_lock_irqsave (&tp->lock, flags);
+	spin_lock_irqsave(&tp->lock, flags);
 
-	netdrv_tx_clear (dev);
+	netdrv_tx_clear(dev);
 
-	spin_unlock_irqrestore (&tp->lock, flags);
+	spin_unlock_irqrestore(&tp->lock, flags);
 
 	/* ...and finally, reset everything */
-	netdrv_hw_start (dev);
+	netdrv_hw_start(dev);
 
-	netif_wake_queue (dev);
+	netif_wake_queue(dev);
 }
 
 
 
-static int netdrv_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	int entry;
 
 	/* Calculate the next Tx descriptor entry. */
-	entry = atomic_read (&tp->cur_tx) % NUM_TX_DESC;
+	entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC;
 
-	assert (tp->tx_info[entry].skb == NULL);
-	assert (tp->tx_info[entry].mapping == 0);
+	assert(tp->tx_info[entry].skb == NULL);
+	assert(tp->tx_info[entry].mapping == 0);
 
 	tp->tx_info[entry].skb = skb;
 	/* tp->tx_info[entry].mapping = 0; */
 	skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len);
 
 	/* Note: the chip doesn't have auto-pad! */
-	NETDRV_W32 (TxStatus0 + (entry * sizeof(u32)),
-		 tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+	NETDRV_W32(TxStatus0 + (entry * sizeof(u32)),
+		   tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
 
 	dev->trans_start = jiffies;
-	atomic_inc (&tp->cur_tx);
-	if ((atomic_read (&tp->cur_tx) - atomic_read (&tp->dirty_tx)) >= NUM_TX_DESC)
-		netif_stop_queue (dev);
+	atomic_inc(&tp->cur_tx);
+	if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC)
+		netif_stop_queue(dev);
 
-	DPRINTK ("%s: Queued Tx packet at %p size %u to slot %d.\n",
-		 dev->name, skb->data, skb->len, entry);
+	netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n",
+		   skb->data, skb->len, entry);
 
 	return NETDEV_TX_OK;
 }
 
 
-static void netdrv_tx_interrupt (struct net_device *dev,
-				  struct netdrv_private *tp,
-				  void *ioaddr)
+static void netdrv_tx_interrupt(struct net_device *dev,
+				struct netdrv_private *tp,
+				void *ioaddr)
 {
 	int cur_tx, dirty_tx, tx_left;
 
-	assert (dev != NULL);
-	assert (tp != NULL);
-	assert (ioaddr != NULL);
+	assert(dev != NULL);
+	assert(tp != NULL);
+	assert(ioaddr != NULL);
 
-	dirty_tx = atomic_read (&tp->dirty_tx);
+	dirty_tx = atomic_read(&tp->dirty_tx);
 
-	cur_tx = atomic_read (&tp->cur_tx);
+	cur_tx = atomic_read(&tp->cur_tx);
 	tx_left = cur_tx - dirty_tx;
 	while (tx_left > 0) {
 		int entry = dirty_tx % NUM_TX_DESC;
 		int txstatus;
 
-		txstatus = NETDRV_R32 (TxStatus0 + (entry * sizeof (u32)));
+		txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32)));
 
 		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
 			break;	/* It still hasn't been Txed */
@@ -1386,12 +1392,12 @@ static void netdrv_tx_interrupt (struct net_device *dev,
 		/* Note: TxCarrierLost is always asserted at 100mbps. */
 		if (txstatus & (TxOutOfWindow | TxAborted)) {
 			/* There was an major error, log it. */
-			DPRINTK ("%s: Transmit error, Tx status %8.8x.\n",
-				 dev->name, txstatus);
+			netdev_dbg(dev, "Transmit error, Tx status %#08x\n",
+				   txstatus);
 			dev->stats.tx_errors++;
 			if (txstatus & TxAborted) {
 				dev->stats.tx_aborted_errors++;
-				NETDRV_W32 (TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
+				NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
 			}
 			if (txstatus & TxCarrierLost)
 				dev->stats.tx_carrier_errors++;
@@ -1417,48 +1423,45 @@ static void netdrv_tx_interrupt (struct net_device *dev,
 					 PCI_DMA_TODEVICE);
 			tp->tx_info[entry].mapping = 0;
 		}
-		dev_kfree_skb_irq (tp->tx_info[entry].skb);
+		dev_kfree_skb_irq(tp->tx_info[entry].skb);
 		tp->tx_info[entry].skb = NULL;
 		dirty_tx++;
 		if (dirty_tx < 0) { /* handle signed int overflow */
-			atomic_sub (cur_tx, &tp->cur_tx); /* XXX racy? */
+			atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */
 			dirty_tx = cur_tx - tx_left + 1;
 		}
-		if (netif_queue_stopped (dev))
-			netif_wake_queue (dev);
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
 
-		cur_tx = atomic_read (&tp->cur_tx);
+		cur_tx = atomic_read(&tp->cur_tx);
 		tx_left = cur_tx - dirty_tx;
 
 	}
 
 #ifndef NETDRV_NDEBUG
-	if (atomic_read (&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
-		printk (KERN_ERR
-		  "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
-		     dev->name, dirty_tx, atomic_read (&tp->cur_tx));
+	if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
+		netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n",
+			   dirty_tx, atomic_read(&tp->cur_tx));
 		dirty_tx += NUM_TX_DESC;
 	}
 #endif /* NETDRV_NDEBUG */
 
-	atomic_set (&tp->dirty_tx, dirty_tx);
+	atomic_set(&tp->dirty_tx, dirty_tx);
 }
 
 
 /* TODO: clean this up!  Rx reset need not be this intensive */
-static void netdrv_rx_err (u32 rx_status, struct net_device *dev,
-			    struct netdrv_private *tp, void *ioaddr)
+static void netdrv_rx_err(u32 rx_status, struct net_device *dev,
+			  struct netdrv_private *tp, void *ioaddr)
 {
 	u8 tmp8;
 	int tmp_work = 1000;
 
-	DPRINTK ("%s: Ethernet frame had errors, status %8.8x.\n",
-	         dev->name, rx_status);
-	if (rx_status & RxTooLong) {
-		DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
-			 dev->name, rx_status);
+	netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status);
+	if (rx_status & RxTooLong)
+		netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
+			   rx_status);
 		/* A.C.: The chip hangs here. */
-	}
 	dev->stats.rx_errors++;
 	if (rx_status & (RxBadSymbol | RxBadAlign))
 		dev->stats.rx_frame_errors++;
@@ -1466,56 +1469,55 @@ static void netdrv_rx_err (u32 rx_status, struct net_device *dev,
 		dev->stats.rx_length_errors++;
 	if (rx_status & RxCRCErr)
 		dev->stats.rx_crc_errors++;
-	/* Reset the receiver, based on RealTek recommendation. (Bug?) */
+	/* Reset the receiver, based on RealTek recommendation.(Bug?) */
 	tp->cur_rx = 0;
 
 	/* disable receive */
-	tmp8 = NETDRV_R8 (ChipCmd) & ChipCmdClear;
-	NETDRV_W8_F (ChipCmd, tmp8 | CmdTxEnb);
+	tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear;
+	NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb);
 
 	/* A.C.: Reset the multicast list. */
-	netdrv_set_rx_mode (dev);
+	netdrv_set_rx_mode(dev);
 
 	/* XXX potentially temporary hack to
 	 * restart hung receiver */
 	while (--tmp_work > 0) {
-		tmp8 = NETDRV_R8 (ChipCmd);
+		tmp8 = NETDRV_R8(ChipCmd);
 		if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
 			break;
-		NETDRV_W8_F (ChipCmd,
-			  (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
+		NETDRV_W8_F(ChipCmd,
+			    (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
 	}
 
 	/* G.S.: Re-enable receiver */
 	/* XXX temporary hack to work around receiver hang */
-	netdrv_set_rx_mode (dev);
+	netdrv_set_rx_mode(dev);
 
 	if (tmp_work <= 0)
-		printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+		netdev_warn(dev, "tx/rx enable wait too long\n");
 }
 
 
 /* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
    field alignments and semantics. */
-static void netdrv_rx_interrupt (struct net_device *dev,
-				  struct netdrv_private *tp, void *ioaddr)
+static void netdrv_rx_interrupt(struct net_device *dev,
+				struct netdrv_private *tp, void *ioaddr)
 {
 	unsigned char *rx_ring;
 	u16 cur_rx;
 
-	assert (dev != NULL);
-	assert (tp != NULL);
-	assert (ioaddr != NULL);
+	assert(dev != NULL);
+	assert(tp != NULL);
+	assert(ioaddr != NULL);
 
 	rx_ring = tp->rx_ring;
 	cur_rx = tp->cur_rx;
 
-	DPRINTK ("%s: In netdrv_rx(), current %4.4x BufAddr %4.4x,"
-		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
-		 NETDRV_R16 (RxBufAddr),
-		 NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd));
+	netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+		   cur_rx, NETDRV_R16(RxBufAddr),
+		   NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
 
-	while ((NETDRV_R8 (ChipCmd) & RxBufEmpty) == 0) {
+	while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) {
 		int ring_offset = cur_rx % RX_BUF_LEN;
 		u32 rx_status;
 		unsigned int rx_size;
@@ -1523,32 +1525,25 @@ static void netdrv_rx_interrupt (struct net_device *dev,
 		struct sk_buff *skb;
 
 		/* read size+status of next frame from DMA ring buffer */
-		rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
+		rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset));
 		rx_size = rx_status >> 16;
 		pkt_size = rx_size - 4;
 
-		DPRINTK ("%s:  netdrv_rx() status %4.4x, size %4.4x,"
-			 " cur %4.4x.\n", dev->name, rx_status,
-			 rx_size, cur_rx);
+		netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n",
+			   rx_status, rx_size, cur_rx);
 #if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
-		{
-			int i;
-			DPRINTK ("%s: Frame contents ", dev->name);
-			for (i = 0; i < 70; i++)
-				printk (" %2.2x",
-					rx_ring[ring_offset + i]);
-			printk (".\n");
-		}
+		print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET,
+				     &rx_ring[ring_offset], 70);
 #endif
 
 		/* If Rx err or invalid rx_size/rx_status received
-		 * (which happens if we get lost in the ring),
+		 *(which happens if we get lost in the ring),
 		 * Rx process gets reset, so we abort any further
 		 * Rx processing.
 		 */
 		if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
 		    (!(rx_status & RxStatusOK))) {
-			netdrv_rx_err (rx_status, dev, tp, ioaddr);
+			netdrv_rx_err(rx_status, dev, tp, ioaddr);
 			return;
 		}
 
@@ -1561,71 +1556,67 @@ static void netdrv_rx_interrupt (struct net_device *dev,
 		 * drop packets here under memory pressure.
 		 */
 
-		skb = dev_alloc_skb (pkt_size + 2);
+		skb = dev_alloc_skb(pkt_size + 2);
 		if (skb) {
-			skb_reserve (skb, 2);	/* 16 byte align the IP fields. */
+			skb_reserve(skb, 2);	/* 16 byte align the IP fields. */
 
-			skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
-			skb_put (skb, pkt_size);
+			skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size);
+			skb_put(skb, pkt_size);
 
-			skb->protocol = eth_type_trans (skb, dev);
-			netif_rx (skb);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
 			dev->stats.rx_bytes += pkt_size;
 			dev->stats.rx_packets++;
 		} else {
-			printk (KERN_WARNING
-				"%s: Memory squeeze, dropping packet.\n",
-				dev->name);
+			netdev_warn(dev, "Memory squeeze, dropping packet\n");
 			dev->stats.rx_dropped++;
 		}
 
 		cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
-		NETDRV_W16_F (RxBufPtr, cur_rx - 16);
+		NETDRV_W16_F(RxBufPtr, cur_rx - 16);
 	}
 
-	DPRINTK ("%s: Done netdrv_rx(), current %4.4x BufAddr %4.4x,"
-		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
-		 NETDRV_R16 (RxBufAddr),
-		 NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd));
+	netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+		   cur_rx, NETDRV_R16(RxBufAddr),
+		   NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
 
 	tp->cur_rx = cur_rx;
 }
 
 
-static void netdrv_weird_interrupt (struct net_device *dev,
-				     struct netdrv_private *tp,
-				     void *ioaddr,
-				     int status, int link_changed)
+static void netdrv_weird_interrupt(struct net_device *dev,
+				   struct netdrv_private *tp,
+				   void *ioaddr,
+				   int status, int link_changed)
 {
-	printk (KERN_DEBUG "%s: Abnormal interrupt, status %8.8x.\n",
-		dev->name, status);
+	netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n",
+		      status);
 
-	assert (dev != NULL);
-	assert (tp != NULL);
-	assert (ioaddr != NULL);
+	assert(dev != NULL);
+	assert(tp != NULL);
+	assert(ioaddr != NULL);
 
 	/* Update the error count. */
-	dev->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
-	NETDRV_W32 (RxMissed, 0);
+	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
+	NETDRV_W32(RxMissed, 0);
 
 	if ((status & RxUnderrun) && link_changed &&
 	    (tp->drv_flags & HAS_LNK_CHNG)) {
 		/* Really link-change on new chips. */
-		int lpar = NETDRV_R16 (NWayLPAR);
+		int lpar = NETDRV_R16(NWayLPAR);
 		int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
-			      tp->duplex_lock);
+			     tp->duplex_lock);
 		if (tp->full_duplex != duplex) {
 			tp->full_duplex = duplex;
-			NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
-			NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20);
-			NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+			NETDRV_W8(Cfg9346, Cfg9346_Unlock);
+			NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
+			NETDRV_W8(Cfg9346, Cfg9346_Lock);
 		}
 		status &= ~RxUnderrun;
 	}
 
 	/* XXX along with netdrv_rx_err, are we double-counting errors? */
-	if (status &
-	    (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
+	if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
 		dev->stats.rx_errors++;
 
 	if (status & (PCSTimeout))
@@ -1634,22 +1625,21 @@ static void netdrv_weird_interrupt (struct net_device *dev,
 		dev->stats.rx_fifo_errors++;
 	if (status & RxOverflow) {
 		dev->stats.rx_over_errors++;
-		tp->cur_rx = NETDRV_R16 (RxBufAddr) % RX_BUF_LEN;
-		NETDRV_W16_F (RxBufPtr, tp->cur_rx - 16);
+		tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN;
+		NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16);
 	}
 	if (status & PCIErr) {
 		u16 pci_cmd_status;
-		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+		pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status);
 
-		printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
-			dev->name, pci_cmd_status);
+		netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
 	}
 }
 
 
 /* The interrupt handler does all of the Rx thread work and cleans up
    after the Tx thread. */
-static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
+static irqreturn_t netdrv_interrupt(int irq, void *dev_instance)
 {
 	struct net_device *dev = (struct net_device *) dev_instance;
 	struct netdrv_private *tp = netdev_priv(dev);
@@ -1658,22 +1648,21 @@ static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
 	int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
 	int handled = 0;
 
-	spin_lock (&tp->lock);
+	spin_lock(&tp->lock);
 
 	do {
-		status = NETDRV_R16 (IntrStatus);
+		status = NETDRV_R16(IntrStatus);
 
-		/* h/w no longer present (hotplug?) or major error, bail */
+		/* h/w no longer present(hotplug?) or major error, bail */
 		if (status == 0xFFFF)
 			break;
 
 		handled = 1;
 		/* Acknowledge all of the current interrupt sources ASAP */
-		NETDRV_W16_F (IntrStatus, status);
+		NETDRV_W16_F(IntrStatus, status);
 
-		DPRINTK ("%s: interrupt  status=%#4.4x new intstat=%#4.4x.\n",
-				dev->name, status,
-				NETDRV_R16 (IntrStatus));
+		netdev_dbg(dev, "interrupt  status=%#04x new intstat=%#04x\n",
+			   status, NETDRV_R16(IntrStatus));
 
 		if ((status &
 		     (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
@@ -1682,69 +1671,67 @@ static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
 
 		/* Check uncommon events with one test. */
 		if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
-		  	      RxFIFOOver | TxErr | RxErr))
-			netdrv_weird_interrupt (dev, tp, ioaddr,
-						 status, link_changed);
+			     RxFIFOOver | TxErr | RxErr))
+			netdrv_weird_interrupt(dev, tp, ioaddr,
+					       status, link_changed);
 
 		if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver))	/* Rx interrupt */
-			netdrv_rx_interrupt (dev, tp, ioaddr);
+			netdrv_rx_interrupt(dev, tp, ioaddr);
 
 		if (status & (TxOK | TxErr))
-			netdrv_tx_interrupt (dev, tp, ioaddr);
+			netdrv_tx_interrupt(dev, tp, ioaddr);
 
 		boguscnt--;
 	} while (boguscnt > 0);
 
 	if (boguscnt <= 0) {
-		printk (KERN_WARNING
-			"%s: Too much work at interrupt, "
-			"IntrStatus=0x%4.4x.\n", dev->name,
-			status);
+		netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n",
+			    status);
 
 		/* Clear all interrupt sources. */
-		NETDRV_W16 (IntrStatus, 0xffff);
+		NETDRV_W16(IntrStatus, 0xffff);
 	}
 
-	spin_unlock (&tp->lock);
+	spin_unlock(&tp->lock);
 
-	DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
-		 dev->name, NETDRV_R16 (IntrStatus));
+	netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n",
+		   NETDRV_R16(IntrStatus));
 	return IRQ_RETVAL(handled);
 }
 
 
-static int netdrv_close (struct net_device *dev)
+static int netdrv_close(struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	unsigned long flags;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	netif_stop_queue (dev);
+	netif_stop_queue(dev);
 
-	DPRINTK ("%s: Shutting down ethercard, status was 0x%4.4x.\n",
-			dev->name, NETDRV_R16 (IntrStatus));
+	netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n",
+		   NETDRV_R16(IntrStatus));
 
-	del_timer_sync (&tp->timer);
+	del_timer_sync(&tp->timer);
 
-	spin_lock_irqsave (&tp->lock, flags);
+	spin_lock_irqsave(&tp->lock, flags);
 
 	/* Stop the chip's Tx and Rx DMA processes. */
-	NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear));
+	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
 
 	/* Disable interrupts by clearing the interrupt mask. */
-	NETDRV_W16 (IntrMask, 0x0000);
+	NETDRV_W16(IntrMask, 0x0000);
 
 	/* Update the error counts. */
-	dev->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
-	NETDRV_W32 (RxMissed, 0);
+	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
+	NETDRV_W32(RxMissed, 0);
 
-	spin_unlock_irqrestore (&tp->lock, flags);
+	spin_unlock_irqrestore(&tp->lock, flags);
 
-	free_irq (dev->irq, dev);
+	free_irq(dev->irq, dev);
 
-	netdrv_tx_clear (dev);
+	netdrv_tx_clear(dev);
 
 	pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
 			    tp->rx_ring, tp->rx_ring_dma);
@@ -1754,23 +1741,23 @@ static int netdrv_close (struct net_device *dev)
 	tp->tx_bufs = NULL;
 
 	/* Green! Put the chip in low-power mode. */
-	NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
-	NETDRV_W8 (Config1, 0x03);
-	NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+	NETDRV_W8(Cfg9346, Cfg9346_Unlock);
+	NETDRV_W8(Config1, 0x03);
+	NETDRV_W8(Cfg9346, Cfg9346_Lock);
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 	return 0;
 }
 
 
-static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	struct mii_ioctl_data *data = if_mii(rq);
 	unsigned long flags;
 	int rc = 0;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
 	switch (cmd) {
 	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
@@ -1778,15 +1765,15 @@ static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 		/* Fall Through */
 
 	case SIOCGMIIREG:		/* Read MII PHY register. */
-		spin_lock_irqsave (&tp->lock, flags);
-		data->val_out = mdio_read (dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
-		spin_unlock_irqrestore (&tp->lock, flags);
+		spin_lock_irqsave(&tp->lock, flags);
+		data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+		spin_unlock_irqrestore(&tp->lock, flags);
 		break;
 
 	case SIOCSMIIREG:		/* Write MII PHY register. */
-		spin_lock_irqsave (&tp->lock, flags);
-		mdio_write (dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
-		spin_unlock_irqrestore (&tp->lock, flags);
+		spin_lock_irqsave(&tp->lock, flags);
+		mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+		spin_unlock_irqrestore(&tp->lock, flags);
 		break;
 
 	default:
@@ -1794,14 +1781,14 @@ static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 		break;
 	}
 
-	DPRINTK ("EXIT, returning %d\n", rc);
+	DPRINTK("EXIT, returning %d\n", rc);
 	return rc;
 }
 
 /* Set or clear the multicast filter for this adaptor.
    This routine is not state sensitive and need not be SMP locked. */
 
-static void netdrv_set_rx_mode (struct net_device *dev)
+static void netdrv_set_rx_mode(struct net_device *dev)
 {
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
@@ -1809,16 +1796,16 @@ static void netdrv_set_rx_mode (struct net_device *dev)
 	int i, rx_mode;
 	u32 tmp;
 
-	DPRINTK ("ENTER\n");
+	DPRINTK("ENTER\n");
 
-	DPRINTK ("%s:   netdrv_set_rx_mode(%4.4x) done -- Rx config %8.8x.\n",
-			dev->name, dev->flags, NETDRV_R32 (RxConfig));
+	netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n",
+		   __func__, dev->flags, NETDRV_R32(RxConfig));
 
 	/* Note: do not reorder, GCC is clever about common statements. */
 	if (dev->flags & IFF_PROMISC) {
 		rx_mode =
-		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
-		    AcceptAllPhys;
+			AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+			AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
 	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
 		   (dev->flags & IFF_ALLMULTI)) {
@@ -1838,66 +1825,66 @@ static void netdrv_set_rx_mode (struct net_device *dev)
 	}
 
 	/* if called from irq handler, lock already acquired */
-	if (!in_irq ())
-		spin_lock_irq (&tp->lock);
+	if (!in_irq())
+		spin_lock_irq(&tp->lock);
 
 	/* We can safely update without stopping the chip. */
 	tmp = netdrv_rx_config | rx_mode |
-		(NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
-	NETDRV_W32_F (RxConfig, tmp);
-	NETDRV_W32_F (MAR0 + 0, mc_filter[0]);
-	NETDRV_W32_F (MAR0 + 4, mc_filter[1]);
+		(NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+	NETDRV_W32_F(RxConfig, tmp);
+	NETDRV_W32_F(MAR0 + 0, mc_filter[0]);
+	NETDRV_W32_F(MAR0 + 4, mc_filter[1]);
 
-	if (!in_irq ())
-		spin_unlock_irq (&tp->lock);
+	if (!in_irq())
+		spin_unlock_irq(&tp->lock);
 
-	DPRINTK ("EXIT\n");
+	DPRINTK("EXIT\n");
 }
 
 
 #ifdef CONFIG_PM
 
-static int netdrv_suspend (struct pci_dev *pdev, pm_message_t state)
+static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state)
 {
-	struct net_device *dev = pci_get_drvdata (pdev);
+	struct net_device *dev = pci_get_drvdata(pdev);
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	unsigned long flags;
 
 	if (!netif_running(dev))
 		return 0;
-	netif_device_detach (dev);
+	netif_device_detach(dev);
 
-	spin_lock_irqsave (&tp->lock, flags);
+	spin_lock_irqsave(&tp->lock, flags);
 
 	/* Disable interrupts, stop Tx and Rx. */
-	NETDRV_W16 (IntrMask, 0x0000);
-	NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear));
+	NETDRV_W16(IntrMask, 0x0000);
+	NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
 
 	/* Update the error counts. */
-	dev->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
-	NETDRV_W32 (RxMissed, 0);
+	dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
+	NETDRV_W32(RxMissed, 0);
 
-	spin_unlock_irqrestore (&tp->lock, flags);
+	spin_unlock_irqrestore(&tp->lock, flags);
 
-	pci_save_state (pdev);
-	pci_set_power_state (pdev, PCI_D3hot);
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
 }
 
 
-static int netdrv_resume (struct pci_dev *pdev)
+static int netdrv_resume(struct pci_dev *pdev)
 {
-	struct net_device *dev = pci_get_drvdata (pdev);
+	struct net_device *dev = pci_get_drvdata(pdev);
 	/*struct netdrv_private *tp = netdev_priv(dev);*/
 
 	if (!netif_running(dev))
 		return 0;
-	pci_set_power_state (pdev, PCI_D0);
-	pci_restore_state (pdev);
-	netif_device_attach (dev);
-	netdrv_hw_start (dev);
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	netif_device_attach(dev);
+	netdrv_hw_start(dev);
 
 	return 0;
 }
@@ -1917,7 +1904,7 @@ static struct pci_driver netdrv_pci_driver = {
 };
 
 
-static int __init netdrv_init_module (void)
+static int __init netdrv_init_module(void)
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
@@ -1927,9 +1914,9 @@ static int __init netdrv_init_module (void)
 }
 
 
-static void __exit netdrv_cleanup_module (void)
+static void __exit netdrv_cleanup_module(void)
 {
-	pci_unregister_driver (&netdrv_pci_driver);
+	pci_unregister_driver(&netdrv_pci_driver);
 }
 
 
-- 
cgit v1.2.3


From f15063cdd6bd541b4f35cec7e9a6c96f3c644c8d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:57 +0000
Subject: drivers/net/skge.c: Use (pr|netdev)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/skge.c | 50 +++++++++++++++++++++-----------------------------
 1 file changed, 21 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index ffa55df4d607..8aa24c52f319 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -23,6 +23,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/in.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -46,7 +48,6 @@
 
 #define DRV_NAME		"skge"
 #define DRV_VERSION		"1.13"
-#define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
 #define DEFAULT_RX_RING_SIZE	512
@@ -1129,8 +1130,7 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
 {
 	u16 v = 0;
 	if (__xm_phy_read(hw, port, reg, &v))
-		printk(KERN_WARNING PFX "%s: phy read timed out\n",
-		       hw->dev[port]->name);
+		pr_warning("%s: phy read timed out\n", hw->dev[port]->name);
 	return v;
 }
 
@@ -1252,8 +1252,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
 
 		lpa = xm_phy_read(hw, port, PHY_XMAC_AUNE_LP);
 		if (lpa & PHY_B_AN_RF) {
-			printk(KERN_NOTICE PFX "%s: remote fault\n",
-			       dev->name);
+			netdev_notice(dev, "remote fault\n");
 			return;
 		}
 
@@ -1268,8 +1267,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
 			skge->duplex = DUPLEX_HALF;
 			break;
 		default:
-			printk(KERN_NOTICE PFX "%s: duplex mismatch\n",
-			       dev->name);
+			netdev_notice(dev, "duplex mismatch\n");
 			return;
 		}
 
@@ -1461,8 +1459,7 @@ static int xm_check_link(struct net_device *dev)
 
 		lpa = xm_phy_read(hw, port, PHY_XMAC_AUNE_LP);
 		if (lpa & PHY_B_AN_RF) {
-			printk(KERN_NOTICE PFX "%s: remote fault\n",
-			       dev->name);
+			netdev_notice(dev, "remote fault\n");
 			return 0;
 		}
 
@@ -1477,8 +1474,7 @@ static int xm_check_link(struct net_device *dev)
 			skge->duplex = DUPLEX_HALF;
 			break;
 		default:
-			printk(KERN_NOTICE PFX "%s: duplex mismatch\n",
-			       dev->name);
+			netdev_notice(dev, "duplex mismatch\n");
 			return 0;
 		}
 
@@ -1566,7 +1562,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 		udelay(1);
 	}
 
-	printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+	netdev_warn(dev, "genesis reset failed\n");
 
  reset_ok:
 	/* Unreset the XMAC. */
@@ -1898,7 +1894,7 @@ static inline void bcom_phy_intr(struct skge_port *skge)
 		     "phy interrupt status 0x%x\n", isrc);
 
 	if (isrc & PHY_B_IS_PSE)
-		printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n",
+		pr_err("%s: uncorrectable pair swap error\n",
 		       hw->dev[port]->name);
 
 	/* Workaround BCom Errata:
@@ -1931,8 +1927,7 @@ static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
 			return 0;
 	}
 
-	printk(KERN_WARNING PFX "%s: phy write timeout\n",
-	       hw->dev[port]->name);
+	pr_warning("%s: phy write timeout\n", hw->dev[port]->name);
 	return -EIO;
 }
 
@@ -1960,8 +1955,7 @@ static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg)
 {
 	u16 v = 0;
 	if (__gm_phy_read(hw, port, reg, &v))
-		printk(KERN_WARNING PFX "%s: phy read timeout\n",
-	       hw->dev[port]->name);
+		pr_warning("%s: phy read timeout\n", hw->dev[port]->name);
 	return v;
 }
 
@@ -2434,8 +2428,7 @@ static void yukon_phy_intr(struct skge_port *skge)
 	}
 	return;
  failed:
-	printk(KERN_ERR PFX "%s: autonegotiation failed (%s)\n",
-	       skge->netdev->name, reason);
+	pr_err("%s: autonegotiation failed (%s)\n", skge->netdev->name, reason);
 
 	/* XXX restart autonegotiation? */
 }
@@ -2824,7 +2817,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
 	smp_wmb();
 
 	if (skge_avail(&skge->tx_ring) <= TX_LOW_WATER) {
-		pr_debug("%s: transmit queue full\n", dev->name);
+		netdev_dbg(dev, "transmit queue full\n");
 		netif_stop_queue(dev);
 	}
 
@@ -3724,7 +3717,7 @@ static int skge_device_event(struct notifier_block *unused,
 			if (d)
 				skge->debugfs = d;
 			else {
-				pr_info(PFX "%s: rename failed\n", dev->name);
+				netdev_info(dev, "rename failed\n");
 				debugfs_remove(skge->debugfs);
 			}
 		}
@@ -3742,8 +3735,7 @@ static int skge_device_event(struct notifier_block *unused,
 					skge_debug, dev,
 					&skge_debug_fops);
 		if (!d || IS_ERR(d))
-			pr_info(PFX "%s: debugfs create failed\n",
-			       dev->name);
+			netdev_info(dev, "debugfs create failed\n");
 		else
 			skge->debugfs = d;
 		break;
@@ -3764,7 +3756,7 @@ static __init void skge_debug_init(void)
 
 	ent = debugfs_create_dir("skge", NULL);
 	if (!ent || IS_ERR(ent)) {
-		pr_info(PFX "debugfs create directory failed\n");
+		pr_info("debugfs create directory failed\n");
 		return;
 	}
 
@@ -3945,9 +3937,10 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_out_iounmap;
 
-	printk(KERN_INFO PFX DRV_VERSION " addr 0x%llx irq %d chip %s rev %d\n",
-	       (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
-	       skge_board_name(hw), hw->chip_rev);
+	pr_info("%s addr 0x%llx irq %d chip %s rev %d\n",
+		DRV_VERSION,
+		(unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
+		skge_board_name(hw), hw->chip_rev);
 
 	dev = skge_devinit(hw, 0, using_dac);
 	if (!dev)
@@ -4104,8 +4097,7 @@ static int skge_resume(struct pci_dev *pdev)
 			err = skge_up(dev);
 
 			if (err) {
-				printk(KERN_ERR PFX "%s: could not up: %d\n",
-				       dev->name, err);
+				netdev_err(dev, "could not up: %d\n", err);
 				dev_close(dev);
 				goto out;
 			}
-- 
cgit v1.2.3


From 67777f9bf255d7561375500a4e117bdb08a883db Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:58 +0000
Subject: drivers/net/skge.c: Use (pr|netdev)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Checkpatch cleaning

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/skge.c | 81 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 42 insertions(+), 39 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 8aa24c52f319..720af1c7854b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -71,9 +71,9 @@ MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static const u32 default_msg
-	= NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK
-	  | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN;
+static const u32 default_msg = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+				NETIF_MSG_LINK | NETIF_MSG_IFUP |
+				NETIF_MSG_IFDOWN);
 
 static int debug = -1;	/* defaults above */
 module_param(debug, int, 0);
@@ -188,8 +188,8 @@ static void skge_wol_init(struct skge_port *skge)
 
 	/* Force to 10/100 skge_reset will re-enable on resume	 */
 	gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
-		     PHY_AN_100FULL | PHY_AN_100HALF |
-		     PHY_AN_10FULL | PHY_AN_10HALF| PHY_AN_CSMA);
+		     (PHY_AN_100FULL | PHY_AN_100HALF |
+		      PHY_AN_10FULL | PHY_AN_10HALF | PHY_AN_CSMA));
 	/* no 1000 HD/FD */
 	gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, 0);
 	gm_phy_write(hw, port, PHY_MARV_CTRL,
@@ -258,25 +258,28 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
 	u32 supported;
 
 	if (hw->copper) {
-		supported = SUPPORTED_10baseT_Half
-			| SUPPORTED_10baseT_Full
-			| SUPPORTED_100baseT_Half
-			| SUPPORTED_100baseT_Full
-			| SUPPORTED_1000baseT_Half
-			| SUPPORTED_1000baseT_Full
-			| SUPPORTED_Autoneg| SUPPORTED_TP;
+		supported = (SUPPORTED_10baseT_Half |
+			     SUPPORTED_10baseT_Full |
+			     SUPPORTED_100baseT_Half |
+			     SUPPORTED_100baseT_Full |
+			     SUPPORTED_1000baseT_Half |
+			     SUPPORTED_1000baseT_Full |
+			     SUPPORTED_Autoneg |
+			     SUPPORTED_TP);
 
 		if (hw->chip_id == CHIP_ID_GENESIS)
-			supported &= ~(SUPPORTED_10baseT_Half
-					     | SUPPORTED_10baseT_Full
-					     | SUPPORTED_100baseT_Half
-					     | SUPPORTED_100baseT_Full);
+			supported &= ~(SUPPORTED_10baseT_Half |
+				       SUPPORTED_10baseT_Full |
+				       SUPPORTED_100baseT_Half |
+				       SUPPORTED_100baseT_Full);
 
 		else if (hw->chip_id == CHIP_ID_YUKON)
 			supported &= ~SUPPORTED_1000baseT_Half;
 	} else
-		supported = SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half
-			| SUPPORTED_FIBRE | SUPPORTED_Autoneg;
+		supported = (SUPPORTED_1000baseT_Full |
+			     SUPPORTED_1000baseT_Half |
+			     SUPPORTED_FIBRE |
+			     SUPPORTED_Autoneg);
 
 	return supported;
 }
@@ -366,7 +369,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		}
 	}
 
-	return (0);
+	return 0;
 }
 
 static void skge_get_drvinfo(struct net_device *dev,
@@ -813,7 +816,7 @@ static int skge_get_eeprom_len(struct net_device *dev)
 	u32 reg2;
 
 	pci_read_config_dword(skge->hw->pdev, PCI_DEV_REG2, &reg2);
-	return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+	return 1 << (((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
 }
 
 static u32 skge_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
@@ -1044,7 +1047,7 @@ static int skge_rx_fill(struct net_device *dev)
 
 		skb_reserve(skb, NET_IP_ALIGN);
 		skge_rx_setup(skge, e, skb, skge->rx_buf_size);
-	} while ( (e = e->next) != ring->start);
+	} while ((e = e->next) != ring->start);
 
 	ring->to_clean = ring->start;
 	return 0;
@@ -1052,7 +1055,7 @@ static int skge_rx_fill(struct net_device *dev)
 
 static const char *skge_pause(enum pause_status status)
 {
-	switch(status) {
+	switch (status) {
 	case FLOW_STAT_NONE:
 		return "none";
 	case FLOW_STAT_REM_SEND:
@@ -1322,7 +1325,7 @@ static void bcom_phy_init(struct skge_port *skge)
 	/* Optimize MDIO transfer by suppressing preamble. */
 	r = xm_read16(hw, port, XM_MMU_CMD);
 	r |=  XM_MMU_NO_PRE;
-	xm_write16(hw, port, XM_MMU_CMD,r);
+	xm_write16(hw, port, XM_MMU_CMD, r);
 
 	switch (id1) {
 	case PHY_BCOM_ID1_C0:
@@ -1512,7 +1515,7 @@ static void xm_link_timer(unsigned long arg)
 {
 	struct skge_port *skge = (struct skge_port *) arg;
 	struct net_device *dev = skge->netdev;
- 	struct skge_hw *hw = skge->hw;
+	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
 	int i;
 	unsigned long flags;
@@ -1531,7 +1534,7 @@ static void xm_link_timer(unsigned long arg)
 			goto link_down;
 	}
 
-        /* Re-enable interrupt to detect link down */
+	/* Re-enable interrupt to detect link down */
 	if (xm_check_link(dev)) {
 		u16 msk = xm_read16(hw, port, XM_IMSK);
 		msk &= ~XM_IS_INP_ASS;
@@ -1588,7 +1591,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 	}
 
 
-	switch(hw->phy_type) {
+	switch (hw->phy_type) {
 	case SK_PHY_XMAC:
 		xm_phy_init(skge);
 		break;
@@ -1695,7 +1698,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 
 	if (jumbo) {
 		/* Enable frame flushing if jumbo frames used */
-		skge_write16(hw, SK_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH);
+		skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
 	} else {
 		/* enable timeout timers if normal frames */
 		skge_write16(hw, B3_PA_CTRL,
@@ -1710,7 +1713,7 @@ static void genesis_stop(struct skge_port *skge)
 	unsigned retries = 1000;
 	u16 cmd;
 
- 	/* Disable Tx and Rx */
+	/* Disable Tx and Rx */
 	cmd = xm_read16(hw, port, XM_MMU_CMD);
 	cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
 	xm_write16(hw, port, XM_MMU_CMD, cmd);
@@ -1789,7 +1792,7 @@ static void genesis_mac_intr(struct skge_hw *hw, int port)
 		     "mac interrupt status 0x%x\n", status);
 
 	if (hw->phy_type == SK_PHY_XMAC && (status & XM_IS_INP_ASS)) {
-  		xm_link_down(hw, port);
+		xm_link_down(hw, port);
 		mod_timer(&skge->link_timer, jiffies + 1);
 	}
 
@@ -1823,7 +1826,7 @@ static void genesis_link_up(struct skge_port *skge)
 	xm_write16(hw, port, XM_MMU_CMD, cmd);
 
 	mode = xm_read32(hw, port, XM_MODE);
-	if (skge->flow_status== FLOW_STAT_SYMMETRIC ||
+	if (skge->flow_status == FLOW_STAT_SYMMETRIC ||
 	    skge->flow_status == FLOW_STAT_LOC_SEND) {
 		/*
 		 * Configure Pause Frame Generation
@@ -2466,7 +2469,7 @@ static int skge_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	if (!netif_running(dev))
 		return -ENODEV;	/* Phy still in reset */
 
-	switch(cmd) {
+	switch (cmd) {
 	case SIOCGMIIPHY:
 		data->phy_id = hw->phy_addr;
 
@@ -2765,7 +2768,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
 		 * does.  Looks like hardware is wrong?
 		 */
 		if (ipip_hdr(skb)->protocol == IPPROTO_UDP &&
-	            hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
+		    hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
 			control = BMU_TCP_CHECK;
 		else
 			control = BMU_UDP_CHECK;
@@ -2777,7 +2780,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
 		control = BMU_CHECK;
 
 	if (!skb_shinfo(skb)->nr_frags) /* single buffer i.e. no fragments */
-		control |= BMU_EOF| BMU_IRQ_EOF;
+		control |= BMU_EOF | BMU_IRQ_EOF;
 	else {
 		struct skge_tx_desc *tf = td;
 
@@ -3077,7 +3080,7 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
 				 pci_unmap_len(e, maplen),
 				 PCI_DMA_FROMDEVICE);
 		skb = e->skb;
-  		prefetch(skb->data);
+		prefetch(skb->data);
 		skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
 	}
 
@@ -3554,8 +3557,7 @@ static int skge_reset(struct skge_hw *hw)
 			hw->ram_offset = 0x80000;
 		} else
 			hw->ram_size = t8 * 512;
-	}
-	else if (t8 == 0)
+	} else if (t8 == 0)
 		hw->ram_size = 0x20000;
 	else
 		hw->ram_size = t8 * 4096;
@@ -3709,7 +3711,7 @@ static int skge_device_event(struct notifier_block *unused,
 		goto done;
 
 	skge = netdev_priv(dev);
-	switch(event) {
+	switch (event) {
 	case NETDEV_CHANGENAME:
 		if (skge->debugfs) {
 			d = debugfs_rename(skge_debug, skge->debugfs,
@@ -3914,7 +3916,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 
 	err = -ENOMEM;
 	/* space for skge@pci:0000:04:00.0 */
-	hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:" )
+	hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
 		     + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
 	if (!hw) {
 		dev_err(&pdev->dev, "cannot allocate hardware struct\n");
@@ -4010,7 +4012,8 @@ static void __devexit skge_remove(struct pci_dev *pdev)
 
 	flush_scheduled_work();
 
-	if ((dev1 = hw->dev[1]))
+	dev1 = hw->dev[1];
+	if (dev1)
 		unregister_netdev(dev1);
 	dev0 = hw->dev[0];
 	unregister_netdev(dev0);
-- 
cgit v1.2.3


From ada1db5c6fac4d400ec284729af19b47488b332d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:01:59 +0000
Subject: drivers/net/sky2.c: Use (pr|netdev)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 63 +++++++++++++++++++++++-------------------------------
 1 file changed, 27 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a1198f141996..d1e98e2170ce 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -22,6 +22,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/crc32.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -51,7 +53,6 @@
 
 #define DRV_NAME		"sky2"
 #define DRV_VERSION		"1.27"
-#define PFX			DRV_NAME " "
 
 /*
  * The Yukon II chipset takes 64 bit command blocks (called list elements)
@@ -1212,8 +1213,7 @@ static void sky2_rx_stop(struct sky2_port *sky2)
 		    == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
 			goto stopped;
 
-	printk(KERN_WARNING PFX "%s: receiver stop failed\n",
-	       sky2->netdev->name);
+	netdev_warn(sky2->netdev, "receiver stop failed\n");
 stopped:
 	sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
 
@@ -1555,7 +1555,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
 	if (ramsize > 0) {
 		u32 rxspace;
 
-		pr_debug(PFX "%s: ram buffer %dK\n", sky2->netdev->name, ramsize);
+		netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
 		if (ramsize < 16)
 			rxspace = ramsize / 2;
 		else
@@ -2070,13 +2070,12 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 	advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
 	lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
 	if (lpa & PHY_M_AN_RF) {
-		printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
+		netdev_err(sky2->netdev, "remote fault\n");
 		return -1;
 	}
 
 	if (!(aux & PHY_M_PS_SPDUP_RES)) {
-		printk(KERN_ERR PFX "%s: speed/duplex mismatch",
-		       sky2->netdev->name);
+		netdev_err(sky2->netdev, "speed/duplex mismatch\n");
 		return -1;
 	}
 
@@ -2195,10 +2194,10 @@ static void sky2_tx_timeout(struct net_device *dev)
 
 	netif_err(sky2, timer, dev, "tx timeout\n");
 
-	printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
-	       dev->name, sky2->tx_cons, sky2->tx_prod,
-	       sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
-	       sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
+	netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
+		      sky2->tx_cons, sky2->tx_prod,
+		      sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+		      sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
 
 	/* can't restart safely under softirq */
 	schedule_work(&hw->restart_work);
@@ -2614,8 +2613,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 
 		default:
 			if (net_ratelimit())
-				printk(KERN_WARNING PFX
-				       "unknown status opcode 0x%x\n", opcode);
+				pr_warning("unknown status opcode 0x%x\n", opcode);
 		}
 	} while (hw->st_idx != idx);
 
@@ -2634,41 +2632,37 @@ static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
 	struct net_device *dev = hw->dev[port];
 
 	if (net_ratelimit())
-		printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
-		       dev->name, status);
+		netdev_info(dev, "hw error interrupt status 0x%x\n", status);
 
 	if (status & Y2_IS_PAR_RD1) {
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: ram data read parity error\n",
-			       dev->name);
+			netdev_err(dev, "ram data read parity error\n");
 		/* Clear IRQ */
 		sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
 	}
 
 	if (status & Y2_IS_PAR_WR1) {
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: ram data write parity error\n",
-			       dev->name);
+			netdev_err(dev, "ram data write parity error\n");
 
 		sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
 	}
 
 	if (status & Y2_IS_PAR_MAC1) {
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
+			netdev_err(dev, "MAC parity error\n");
 		sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
 	}
 
 	if (status & Y2_IS_PAR_RX1) {
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
+			netdev_err(dev, "RX parity error\n");
 		sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
 	}
 
 	if (status & Y2_IS_TCP_TXA1) {
 		if (net_ratelimit())
-			printk(KERN_ERR PFX "%s: TCP segmentation error\n",
-			       dev->name);
+			netdev_err(dev, "TCP segmentation error\n");
 		sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
 	}
 }
@@ -2751,8 +2745,7 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
 	struct net_device *dev = hw->dev[port];
 	u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
 
-	dev_err(&hw->pdev->dev, PFX
-		"%s: descriptor error q=%#x get=%u put=%u\n",
+	dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
 		dev->name, (unsigned) q, (unsigned) idx,
 		(unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
 
@@ -2777,9 +2770,10 @@ static int sky2_rx_hung(struct net_device *dev)
 	     /* Check if the PCI RX hang */
 	     (fifo_rp == sky2->check.fifo_rp &&
 	      fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
-		printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
-		       dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
-		       sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
+		netdev_printk(KERN_DEBUG, dev,
+			      "hung mac %d:%d fifo %d (%d:%d)\n",
+			      mac_lev, mac_rp, fifo_lev,
+			      fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
 		return 1;
 	} else {
 		sky2->check.last = dev->last_rx;
@@ -2810,8 +2804,7 @@ static void sky2_watchdog(unsigned long arg)
 			/* For chips with Rx FIFO, check if stuck */
 			if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
 			     sky2_rx_hung(dev)) {
-				pr_info(PFX "%s: receiver hang detected\n",
-					dev->name);
+				netdev_info(dev, "receiver hang detected\n");
 				schedule_work(&hw->restart_work);
 				return;
 			}
@@ -3253,8 +3246,7 @@ static int sky2_reattach(struct net_device *dev)
 	if (netif_running(dev)) {
 		err = sky2_up(dev);
 		if (err) {
-			printk(KERN_INFO PFX "%s: could not restart %d\n",
-			       dev->name, err);
+			netdev_info(dev, "could not restart %d\n", err);
 			dev_close(dev);
 		} else {
 			netif_device_attach(dev);
@@ -4032,7 +4024,7 @@ static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
 	while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
 		/* Can take up to 10.6 ms for write */
 		if (time_after(jiffies, start + HZ/4)) {
-			dev_err(&hw->pdev->dev, PFX "VPD cycle timed out");
+			dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
 			return -ETIMEDOUT;
 		}
 		mdelay(1);
@@ -4366,8 +4358,7 @@ static int sky2_device_event(struct notifier_block *unused,
 
 	case NETDEV_GOING_DOWN:
 		if (sky2->debugfs) {
-			printk(KERN_DEBUG PFX "%s: remove debugfs\n",
-			       dev->name);
+			netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
 			debugfs_remove(sky2->debugfs);
 			sky2->debugfs = NULL;
 		}
@@ -4931,7 +4922,7 @@ static struct pci_driver sky2_driver = {
 
 static int __init sky2_init_module(void)
 {
-	pr_info(PFX "driver version " DRV_VERSION "\n");
+	pr_info("driver version " DRV_VERSION "\n");
 
 	sky2_debug_init();
 	return pci_register_driver(&sky2_driver);
-- 
cgit v1.2.3


From acbbf1f1fd63391eeba70fec991568e4334c80d4 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 15:02:02 +0000
Subject: drivers/net/yellowfin.c: Use (pr|netdev)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Convert formats like %8.8 to %08
Remove periods from formats
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/yellowfin.c | 162 +++++++++++++++++++++++-------------------------
 1 file changed, 78 insertions(+), 84 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 5c880240a642..e4aab4d5b553 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -23,12 +23,12 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"yellowfin"
 #define DRV_VERSION	"2.1"
 #define DRV_RELDATE	"Sep 11, 2006"
 
-#define PFX DRV_NAME ": "
-
 /* The user-configurable values.
    These may be modified when a driver module is loaded.*/
 
@@ -399,7 +399,7 @@ static int __devinit yellowfin_init_one(struct pci_dev *pdev,
 
 	dev = alloc_etherdev(sizeof(*np));
 	if (!dev) {
-		printk (KERN_ERR PFX "cannot allocate ethernet device\n");
+		pr_err("cannot allocate ethernet device\n");
 		return -ENOMEM;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
@@ -487,10 +487,10 @@ static int __devinit yellowfin_init_one(struct pci_dev *pdev,
 	if (i)
 		goto err_out_unmap_status;
 
-	printk(KERN_INFO "%s: %s type %8x at %p, %pM, IRQ %d.\n",
-		   dev->name, pci_id_tbl[chip_idx].name,
-		   ioread32(ioaddr + ChipRev), ioaddr,
-		   dev->dev_addr, irq);
+	netdev_info(dev, "%s type %8x at %p, %pM, IRQ %d\n",
+		    pci_id_tbl[chip_idx].name,
+		    ioread32(ioaddr + ChipRev), ioaddr,
+		    dev->dev_addr, irq);
 
 	if (np->drv_flags & HasMII) {
 		int phy, phy_idx = 0;
@@ -499,9 +499,8 @@ static int __devinit yellowfin_init_one(struct pci_dev *pdev,
 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 				np->phys[phy_idx++] = phy;
 				np->advertising = mdio_read(ioaddr, phy, 4);
-				printk(KERN_INFO "%s: MII PHY found at address %d, status "
-					   "0x%4.4x advertising %4.4x.\n",
-					   dev->name, phy, mii_status, np->advertising);
+				netdev_info(dev, "MII PHY found at address %d, status 0x%04x advertising %04x\n",
+					    phy, mii_status, np->advertising);
 			}
 		}
 		np->mii_cnt = phy_idx;
@@ -584,8 +583,8 @@ static int yellowfin_open(struct net_device *dev)
 		return ret;
 
 	if (yellowfin_debug > 1)
-		printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
-			   dev->name, dev->irq);
+		netdev_printk(KERN_DEBUG, dev, "%s() irq %d\n",
+			      __func__, dev->irq);
 
 	ret = yellowfin_init_ring(dev);
 	if (ret) {
@@ -642,8 +641,7 @@ static int yellowfin_open(struct net_device *dev)
 	iowrite32(0x80008000, ioaddr + TxCtrl);
 
 	if (yellowfin_debug > 2) {
-		printk(KERN_DEBUG "%s: Done yellowfin_open().\n",
-			   dev->name);
+		netdev_printk(KERN_DEBUG, dev, "Done %s()\n", __func__);
 	}
 
 	/* Set the timer to check for link beat. */
@@ -664,8 +662,8 @@ static void yellowfin_timer(unsigned long data)
 	int next_tick = 60*HZ;
 
 	if (yellowfin_debug > 3) {
-		printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n",
-			   dev->name, ioread16(ioaddr + IntrStatus));
+		netdev_printk(KERN_DEBUG, dev, "Yellowfin timer tick, status %08x\n",
+			      ioread16(ioaddr + IntrStatus));
 	}
 
 	if (yp->mii_cnt) {
@@ -673,9 +671,8 @@ static void yellowfin_timer(unsigned long data)
 		int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
 		int negotiated = lpa & yp->advertising;
 		if (yellowfin_debug > 1)
-			printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
-				   "link partner capability %4.4x.\n",
-				   dev->name, yp->phys[0], bmsr, lpa);
+			netdev_printk(KERN_DEBUG, dev, "MII #%d status register is %04x, link partner capability %04x\n",
+				      yp->phys[0], bmsr, lpa);
 
 		yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
 
@@ -696,25 +693,24 @@ static void yellowfin_tx_timeout(struct net_device *dev)
 	struct yellowfin_private *yp = netdev_priv(dev);
 	void __iomem *ioaddr = yp->base;
 
-	printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx "
-		   "status %4.4x, Rx status %4.4x, resetting...\n",
-		   dev->name, yp->cur_tx, yp->dirty_tx,
-		   ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
+	netdev_warn(dev, "Yellowfin transmit timed out at %d/%d Tx status %04x, Rx status %04x, resetting...\n",
+		    yp->cur_tx, yp->dirty_tx,
+		    ioread32(ioaddr + TxStatus),
+		    ioread32(ioaddr + RxStatus));
 
 	/* Note: these should be KERN_DEBUG. */
 	if (yellowfin_debug) {
 		int i;
-		printk(KERN_WARNING "  Rx ring %p: ", yp->rx_ring);
+		pr_warning("  Rx ring %p: ", yp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(KERN_CONT " %8.8x",
-			       yp->rx_ring[i].result_status);
-		printk(KERN_CONT "\n");
-		printk(KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
+			pr_cont(" %08x", yp->rx_ring[i].result_status);
+		pr_cont("\n");
+		pr_warning("  Tx ring %p: ", yp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(KERN_CONT " %4.4x /%8.8x",
+			pr_cont(" %04x /%08x",
 			       yp->tx_status[i].tx_errs,
 			       yp->tx_ring[i].result_status);
-		printk(KERN_CONT "\n");
+		pr_cont("\n");
 	}
 
 	/* If the hardware is found to hang regularly, we will update the code
@@ -891,8 +887,8 @@ static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
 		yp->tx_full = 1;
 
 	if (yellowfin_debug > 4) {
-		printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
-			   dev->name, yp->cur_tx, entry);
+		netdev_printk(KERN_DEBUG, dev, "Yellowfin transmit frame #%d queued in slot %d\n",
+			      yp->cur_tx, entry);
 	}
 	return NETDEV_TX_OK;
 }
@@ -916,8 +912,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 		u16 intr_status = ioread16(ioaddr + IntrClear);
 
 		if (yellowfin_debug > 4)
-			printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n",
-				   dev->name, intr_status);
+			netdev_printk(KERN_DEBUG, dev, "Yellowfin interrupt, status %04x\n",
+				      intr_status);
 
 		if (intr_status == 0)
 			break;
@@ -963,13 +959,12 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 
 #ifndef final_version
 				if (yellowfin_debug > 5)
-					printk(KERN_DEBUG "%s: Tx queue %d check, Tx status "
-						   "%4.4x %4.4x %4.4x %4.4x.\n",
-						   dev->name, entry,
-						   yp->tx_status[entry].tx_cnt,
-						   yp->tx_status[entry].tx_errs,
-						   yp->tx_status[entry].total_tx_cnt,
-						   yp->tx_status[entry].paused);
+					netdev_printk(KERN_DEBUG, dev, "Tx queue %d check, Tx status %04x %04x %04x %04x\n",
+						      entry,
+						      yp->tx_status[entry].tx_cnt,
+						      yp->tx_status[entry].tx_errs,
+						      yp->tx_status[entry].total_tx_cnt,
+						      yp->tx_status[entry].paused);
 #endif
 				if (tx_errs == 0)
 					break;	/* It still hasn't been Txed */
@@ -978,8 +973,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 					/* There was an major error, log it. */
 #ifndef final_version
 					if (yellowfin_debug > 1)
-						printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n",
-							   dev->name, tx_errs);
+						netdev_printk(KERN_DEBUG, dev, "Transmit error, Tx status %04x\n",
+							      tx_errs);
 #endif
 					dev->stats.tx_errors++;
 					if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
@@ -989,8 +984,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 				} else {
 #ifndef final_version
 					if (yellowfin_debug > 4)
-						printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n",
-							   dev->name, tx_errs);
+						netdev_printk(KERN_DEBUG, dev, "Normal transmit, Tx status %04x\n",
+							      tx_errs);
 #endif
 					dev->stats.tx_bytes += skb->len;
 					dev->stats.collisions += tx_errs & 15;
@@ -1008,8 +1003,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 
 #ifndef final_version
 			if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
-				printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
-					   dev->name, dirty_tx, yp->cur_tx, yp->tx_full);
+				netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d\n",
+					   dirty_tx, yp->cur_tx, yp->tx_full);
 				dirty_tx += TX_RING_SIZE;
 			}
 #endif
@@ -1031,16 +1026,15 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 			yellowfin_error(dev, intr_status);
 
 		if (--boguscnt < 0) {
-			printk(KERN_WARNING "%s: Too much work at interrupt, "
-				   "status=0x%4.4x.\n",
-				   dev->name, intr_status);
+			netdev_warn(dev, "Too much work at interrupt, status=%#04x\n",
+				    intr_status);
 			break;
 		}
 	} while (1);
 
 	if (yellowfin_debug > 3)
-		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
-			   dev->name, ioread16(ioaddr + IntrStatus));
+		netdev_printk(KERN_DEBUG, dev, "exiting interrupt, status=%#04x\n",
+			      ioread16(ioaddr + IntrStatus));
 
 	spin_unlock (&yp->lock);
 	return IRQ_RETVAL(handled);
@@ -1055,9 +1049,9 @@ static int yellowfin_rx(struct net_device *dev)
 	int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
 
 	if (yellowfin_debug > 4) {
-		printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n",
+		printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %08x\n",
 			   entry, yp->rx_ring[entry].result_status);
-		printk(KERN_DEBUG "   #%d desc. %8.8x %8.8x %8.8x.\n",
+		printk(KERN_DEBUG "   #%d desc. %08x %08x %08x\n",
 			   entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
 			   yp->rx_ring[entry].result_status);
 	}
@@ -1081,20 +1075,20 @@ static int yellowfin_rx(struct net_device *dev)
 			le32_to_cpu(desc->result_status)) & 0xffff;
 		frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
 		if (yellowfin_debug > 4)
-			printk(KERN_DEBUG "  yellowfin_rx() status was %4.4x.\n",
-				   frame_status);
+			printk(KERN_DEBUG "  %s() status was %04x\n",
+			       __func__, frame_status);
 		if (--boguscnt < 0)
 			break;
 		if ( ! (desc_status & RX_EOP)) {
 			if (data_size != 0)
-				printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers,"
-					   " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size);
+				netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %04x, data_size %d!\n",
+					    desc_status, data_size);
 			dev->stats.rx_length_errors++;
 		} else if ((yp->drv_flags & IsGigabit)  &&  (frame_status & 0x0038)) {
 			/* There was a error. */
 			if (yellowfin_debug > 3)
-				printk(KERN_DEBUG "  yellowfin_rx() Rx error was %4.4x.\n",
-					   frame_status);
+				printk(KERN_DEBUG "  %s() Rx error was %04x\n",
+				       __func__, frame_status);
 			dev->stats.rx_errors++;
 			if (frame_status & 0x0060) dev->stats.rx_length_errors++;
 			if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
@@ -1118,8 +1112,8 @@ static int yellowfin_rx(struct net_device *dev)
 				entry*sizeof(struct yellowfin_desc)),
 				"\377\377\377\377\377\377", 6) != 0) {
 			if (bogus_rx++ == 0)
-				printk(KERN_WARNING "%s: Bad frame to %pM\n",
-					   dev->name, buf_addr);
+				netdev_warn(dev, "Bad frame to %pM\n",
+					    buf_addr);
 #endif
 		} else {
 			struct sk_buff *skb;
@@ -1129,9 +1123,8 @@ static int yellowfin_rx(struct net_device *dev)
 
 #ifndef final_version
 			if (yellowfin_debug > 4)
-				printk(KERN_DEBUG "  yellowfin_rx() normal Rx pkt length %d"
-					   " of %d, bogus_cnt %d.\n",
-					   pkt_len, data_size, boguscnt);
+				printk(KERN_DEBUG "  %s() normal Rx pkt length %d of %d, bogus_cnt %d\n",
+				       __func__, pkt_len, data_size, boguscnt);
 #endif
 			/* Check if the packet is long enough to just pass up the skbuff
 			   without copying to a properly sized skbuff. */
@@ -1191,8 +1184,7 @@ static int yellowfin_rx(struct net_device *dev)
 
 static void yellowfin_error(struct net_device *dev, int intr_status)
 {
-	printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
-		   dev->name, intr_status);
+	netdev_err(dev, "Something Wicked happened! %04x\n", intr_status);
 	/* Hmmmmm, it's not clear what to do here. */
 	if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
 		dev->stats.tx_errors++;
@@ -1209,13 +1201,13 @@ static int yellowfin_close(struct net_device *dev)
 	netif_stop_queue (dev);
 
 	if (yellowfin_debug > 1) {
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x "
-			   "Rx %4.4x Int %2.2x.\n",
-			   dev->name, ioread16(ioaddr + TxStatus),
-			   ioread16(ioaddr + RxStatus),
-			   ioread16(ioaddr + IntrStatus));
-		printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
-			   dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx);
+		netdev_printk(KERN_DEBUG, dev, "Shutting down ethercard, status was Tx %04x Rx %04x Int %02x\n",
+			      ioread16(ioaddr + TxStatus),
+			      ioread16(ioaddr + RxStatus),
+			      ioread16(ioaddr + IntrStatus));
+		netdev_printk(KERN_DEBUG, dev, "Queue pointers were Tx %d / %d,  Rx %d / %d\n",
+			      yp->cur_tx, yp->dirty_tx,
+			      yp->cur_rx, yp->dirty_rx);
 	}
 
 	/* Disable interrupts by clearing the interrupt mask. */
@@ -1229,33 +1221,35 @@ static int yellowfin_close(struct net_device *dev)
 
 #if defined(__i386__)
 	if (yellowfin_debug > 2) {
-		printk(KERN_DEBUG"  Tx ring at %8.8llx:\n",
+		printk(KERN_DEBUG "  Tx ring at %08llx:\n",
 				(unsigned long long)yp->tx_ring_dma);
 		for (i = 0; i < TX_RING_SIZE*2; i++)
-			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x %08x\n",
 				   ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
 				   i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
 				   yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
 		printk(KERN_DEBUG "  Tx status %p:\n", yp->tx_status);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(KERN_DEBUG "   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+			printk(KERN_DEBUG "   #%d status %04x %04x %04x %04x\n",
 				   i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
 				   yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
 
-		printk(KERN_DEBUG "  Rx ring %8.8llx:\n",
+		printk(KERN_DEBUG "  Rx ring %08llx:\n",
 				(unsigned long long)yp->rx_ring_dma);
 		for (i = 0; i < RX_RING_SIZE; i++) {
-			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
+			printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x\n",
 				   ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
 				   i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
 				   yp->rx_ring[i].result_status);
 			if (yellowfin_debug > 6) {
 				if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
 					int j;
+
+					printk(KERN_DEBUG);
 					for (j = 0; j < 0x50; j++)
-						printk(" %4.4x",
-							   get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
-					printk("\n");
+						pr_cont(" %04x",
+							get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
+					pr_cont("\n");
 				}
 			}
 		}
@@ -1281,8 +1275,8 @@ static int yellowfin_close(struct net_device *dev)
 
 #ifdef YF_PROTOTYPE			/* Support for prototype hardware errata. */
 	if (yellowfin_debug > 0) {
-		printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n",
-			   dev->name, bogus_rx);
+		netdev_printk(KERN_DEBUG, dev, "Received %d frames that we should not have\n",
+			      bogus_rx);
 	}
 #endif
 
-- 
cgit v1.2.3


From dfa1a041094f4a6e5845a19a1b10e317676722e7 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 18:48:11 -0800
Subject: drivers/net/tehuti.c: Reapply use DEFINE_PCI_DEVICE_TABLE()

Commit 865a21a5e3d1b384c559a44c898fcad93e187b82 overwrote
commit a3aa18842a5303fc28fcc4d57dbd16618bd830a0

Fix it.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tehuti.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index b295b926bc45..2517cc00ac2a 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -66,7 +66,7 @@
 
 #include "tehuti.h"
 
-static struct pci_device_id __devinitdata bdx_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(bdx_pci_tbl) = {
 	{0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1FC9, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{0x1FC9, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-- 
cgit v1.2.3


From 02df55d28c6001a3cdb7a997a34a0b01f01d015e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Feb 2010 05:45:36 +0000
Subject: macvtap: rework object lifetime rules

This reworks the change done by the previous patch
in a more complete way.

The original macvtap code has a number of problems
resulting from the use of RCU for protecting the
access to struct macvtap_queue from open files.

This includes
- need for GFP_ATOMIC allocations for skbs
- potential deadlocks when copy_*_user sleeps
- inability to work with vhost-net

Changing the lifetime of macvtap_queue to always
depend on the open file solves all these. The
RCU reference simply moves one step down to
the reference on the macvlan_dev, which we
only need for nonblocking operations.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvtap.c | 183 +++++++++++++++++++++++++-------------------------
 1 file changed, 91 insertions(+), 92 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index fe7656bf68c6..705099749766 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -60,30 +60,19 @@ static struct cdev macvtap_cdev;
 
 /*
  * RCU usage:
- * The macvtap_queue is referenced both from the chardev struct file
- * and from the struct macvlan_dev using rcu_read_lock.
+ * The macvtap_queue and the macvlan_dev are loosely coupled, the
+ * pointers from one to the other can only be read while rcu_read_lock
+ * or macvtap_lock is held.
  *
- * We never actually update the contents of a macvtap_queue atomically
- * with RCU but it is used for race-free destruction of a queue when
- * either the file or the macvlan_dev goes away. Pointers back to
- * the dev and the file are implicitly valid as long as the queue
- * exists.
+ * Both the file and the macvlan_dev hold a reference on the macvtap_queue
+ * through sock_hold(&q->sk). When the macvlan_dev goes away first,
+ * q->vlan becomes inaccessible. When the files gets closed,
+ * macvtap_get_queue() fails.
  *
- * The callbacks from macvlan are always done with rcu_read_lock held
- * already. For calls from file_operations, we use the rcu_read_lock_bh
- * to get a reference count on the socket and the device.
- *
- * When destroying a queue, we remove the pointers from the file and
- * from the dev and then synchronize_rcu to make sure no thread is
- * still using the queue. There may still be references to the struct
- * sock inside of the queue from outbound SKBs, but these never
- * reference back to the file or the dev. The data structure is freed
- * through __sk_free when both our references and any pending SKBs
- * are gone.
- *
- * macvtap_lock is only used to prevent multiple concurrent open()
- * calls to assign a new vlan->tap pointer. It could be moved into
- * the macvlan_dev itself but is extremely rarely used.
+ * There may still be references to the struct sock inside of the
+ * queue from outbound SKBs, but these never reference back to the
+ * file or the dev. The data structure is freed through __sk_free
+ * when both our references and any pending SKBs are gone.
  */
 static DEFINE_SPINLOCK(macvtap_lock);
 
@@ -101,11 +90,12 @@ static int macvtap_set_queue(struct net_device *dev, struct file *file,
 		goto out;
 
 	err = 0;
-	q->vlan = vlan;
+	rcu_assign_pointer(q->vlan, vlan);
 	rcu_assign_pointer(vlan->tap, q);
+	sock_hold(&q->sk);
 
 	q->file = file;
-	rcu_assign_pointer(file->private_data, q);
+	file->private_data = q;
 
 out:
 	spin_unlock(&macvtap_lock);
@@ -113,28 +103,25 @@ out:
 }
 
 /*
- * We must destroy each queue exactly once, when either
- * the netdev or the file go away.
+ * The file owning the queue got closed, give up both
+ * the reference that the files holds as well as the
+ * one from the macvlan_dev if that still exists.
  *
  * Using the spinlock makes sure that we don't get
  * to the queue again after destroying it.
- *
- * synchronize_rcu serializes with the packet flow
- * that uses rcu_read_lock.
  */
-static void macvtap_del_queue(struct macvtap_queue **qp)
+static void macvtap_put_queue(struct macvtap_queue *q)
 {
-	struct macvtap_queue *q;
+	struct macvlan_dev *vlan;
 
 	spin_lock(&macvtap_lock);
-	q = rcu_dereference(*qp);
-	if (!q) {
-		spin_unlock(&macvtap_lock);
-		return;
+	vlan = rcu_dereference(q->vlan);
+	if (vlan) {
+		rcu_assign_pointer(vlan->tap, NULL);
+		rcu_assign_pointer(q->vlan, NULL);
+		sock_put(&q->sk);
 	}
 
-	rcu_assign_pointer(q->vlan->tap, NULL);
-	rcu_assign_pointer(q->file->private_data, NULL);
 	spin_unlock(&macvtap_lock);
 
 	synchronize_rcu();
@@ -152,29 +139,29 @@ static struct macvtap_queue *macvtap_get_queue(struct net_device *dev,
 	return rcu_dereference(vlan->tap);
 }
 
+/*
+ * The net_device is going away, give up the reference
+ * that it holds on the queue (all the queues one day)
+ * and safely set the pointer from the queues to NULL.
+ */
 static void macvtap_del_queues(struct net_device *dev)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
-	macvtap_del_queue(&vlan->tap);
-}
-
-static inline struct macvtap_queue *macvtap_file_get_queue(struct file *file)
-{
 	struct macvtap_queue *q;
-	rcu_read_lock_bh();
-	q = rcu_dereference(file->private_data);
-	if (q) {
-		sock_hold(&q->sk);
-		dev_hold(q->vlan->dev);
+
+	spin_lock(&macvtap_lock);
+	q = rcu_dereference(vlan->tap);
+	if (!q) {
+		spin_unlock(&macvtap_lock);
+		return;
 	}
-	rcu_read_unlock_bh();
-	return q;
-}
 
-static inline void macvtap_file_put_queue(struct macvtap_queue *q)
-{
+	rcu_assign_pointer(vlan->tap, NULL);
+	rcu_assign_pointer(q->vlan, NULL);
+	spin_unlock(&macvtap_lock);
+
+	synchronize_rcu();
 	sock_put(&q->sk);
-	dev_put(q->vlan->dev);
 }
 
 /*
@@ -284,7 +271,6 @@ static int macvtap_open(struct inode *inode, struct file *file)
 	q->sock.type = SOCK_RAW;
 	q->sock.state = SS_CONNECTED;
 	sock_init_data(&q->sock, &q->sk);
-	q->sk.sk_allocation = GFP_ATOMIC; /* for now */
 	q->sk.sk_write_space = macvtap_sock_write_space;
 
 	err = macvtap_set_queue(dev, file, q);
@@ -300,13 +286,14 @@ out:
 
 static int macvtap_release(struct inode *inode, struct file *file)
 {
-	macvtap_del_queue((struct macvtap_queue **)&file->private_data);
+	struct macvtap_queue *q = file->private_data;
+	macvtap_put_queue(q);
 	return 0;
 }
 
 static unsigned int macvtap_poll(struct file *file, poll_table * wait)
 {
-	struct macvtap_queue *q = macvtap_file_get_queue(file);
+	struct macvtap_queue *q = file->private_data;
 	unsigned int mask = POLLERR;
 
 	if (!q)
@@ -323,7 +310,6 @@ static unsigned int macvtap_poll(struct file *file, poll_table * wait)
 	     sock_writeable(&q->sk)))
 		mask |= POLLOUT | POLLWRNORM;
 
-	macvtap_file_put_queue(q);
 out:
 	return mask;
 }
@@ -334,6 +320,7 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q,
 				int noblock)
 {
 	struct sk_buff *skb;
+	struct macvlan_dev *vlan;
 	size_t len = count;
 	int err;
 
@@ -341,26 +328,37 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q,
 		return -EINVAL;
 
 	skb = sock_alloc_send_skb(&q->sk, NET_IP_ALIGN + len, noblock, &err);
-
-	if (!skb) {
-		macvlan_count_rx(q->vlan, 0, false, false);
-		return err;
-	}
+	if (!skb)
+		goto err;
 
 	skb_reserve(skb, NET_IP_ALIGN);
 	skb_put(skb, count);
 
-	if (skb_copy_datagram_from_iovec(skb, 0, iv, 0, len)) {
-		macvlan_count_rx(q->vlan, 0, false, false);
-		kfree_skb(skb);
-		return -EFAULT;
-	}
+	err = skb_copy_datagram_from_iovec(skb, 0, iv, 0, len);
+	if (err)
+		goto err;
 
 	skb_set_network_header(skb, ETH_HLEN);
-
-	macvlan_start_xmit(skb, q->vlan->dev);
+	rcu_read_lock_bh();
+	vlan = rcu_dereference(q->vlan);
+	if (vlan)
+		macvlan_start_xmit(skb, vlan->dev);
+	else
+		kfree_skb(skb);
+	rcu_read_unlock_bh();
 
 	return count;
+
+err:
+	rcu_read_lock_bh();
+	vlan = rcu_dereference(q->vlan);
+	if (vlan)
+		macvlan_count_rx(q->vlan, 0, false, false);
+	rcu_read_unlock_bh();
+
+	kfree_skb(skb);
+
+	return err;
 }
 
 static ssize_t macvtap_aio_write(struct kiocb *iocb, const struct iovec *iv,
@@ -368,15 +366,10 @@ static ssize_t macvtap_aio_write(struct kiocb *iocb, const struct iovec *iv,
 {
 	struct file *file = iocb->ki_filp;
 	ssize_t result = -ENOLINK;
-	struct macvtap_queue *q = macvtap_file_get_queue(file);
-
-	if (!q)
-		goto out;
+	struct macvtap_queue *q = file->private_data;
 
 	result = macvtap_get_user(q, iv, iov_length(iv, count),
 			      file->f_flags & O_NONBLOCK);
-	macvtap_file_put_queue(q);
-out:
 	return result;
 }
 
@@ -385,14 +378,17 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
 				const struct sk_buff *skb,
 				const struct iovec *iv, int len)
 {
-	struct macvlan_dev *vlan = q->vlan;
+	struct macvlan_dev *vlan;
 	int ret;
 
 	len = min_t(int, skb->len, len);
 
 	ret = skb_copy_datagram_const_iovec(skb, 0, iv, 0, len);
 
+	rcu_read_lock_bh();
+	vlan = rcu_dereference(q->vlan);
 	macvlan_count_rx(vlan, len, ret == 0, 0);
+	rcu_read_unlock_bh();
 
 	return ret ? ret : len;
 }
@@ -401,14 +397,16 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
 				unsigned long count, loff_t pos)
 {
 	struct file *file = iocb->ki_filp;
-	struct macvtap_queue *q = macvtap_file_get_queue(file);
+	struct macvtap_queue *q = file->private_data;
 
 	DECLARE_WAITQUEUE(wait, current);
 	struct sk_buff *skb;
 	ssize_t len, ret = 0;
 
-	if (!q)
-		return -ENOLINK;
+	if (!q) {
+		ret = -ENOLINK;
+		goto out;
+	}
 
 	len = iov_length(iv, count);
 	if (len < 0) {
@@ -444,7 +442,6 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
 	remove_wait_queue(q->sk.sk_sleep, &wait);
 
 out:
-	macvtap_file_put_queue(q);
 	return ret;
 }
 
@@ -454,12 +451,13 @@ out:
 static long macvtap_ioctl(struct file *file, unsigned int cmd,
 			  unsigned long arg)
 {
-	struct macvtap_queue *q;
+	struct macvtap_queue *q = file->private_data;
+	struct macvlan_dev *vlan;
 	void __user *argp = (void __user *)arg;
 	struct ifreq __user *ifr = argp;
 	unsigned int __user *up = argp;
 	unsigned int u;
-	char devname[IFNAMSIZ];
+	int ret;
 
 	switch (cmd) {
 	case TUNSETIFF:
@@ -471,16 +469,21 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 		return 0;
 
 	case TUNGETIFF:
-		q = macvtap_file_get_queue(file);
-		if (!q)
+		rcu_read_lock_bh();
+		vlan = rcu_dereference(q->vlan);
+		if (vlan)
+			dev_hold(vlan->dev);
+		rcu_read_unlock_bh();
+
+		if (!vlan)
 			return -ENOLINK;
-		memcpy(devname, q->vlan->dev->name, sizeof(devname));
-		macvtap_file_put_queue(q);
 
+		ret = 0;
 		if (copy_to_user(&ifr->ifr_name, q->vlan->dev->name, IFNAMSIZ) ||
 		    put_user((TUN_TAP_DEV | TUN_NO_PI), &ifr->ifr_flags))
-			return -EFAULT;
-		return 0;
+			ret = -EFAULT;
+		dev_put(vlan->dev);
+		return ret;
 
 	case TUNGETFEATURES:
 		if (put_user((IFF_TAP | IFF_NO_PI), up))
@@ -491,11 +494,7 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 		if (get_user(u, up))
 			return -EFAULT;
 
-		q = macvtap_file_get_queue(file);
-		if (!q)
-			return -ENOLINK;
 		q->sk.sk_sndbuf = u;
-		macvtap_file_put_queue(q);
 		return 0;
 
 	case TUNSETOFFLOAD:
-- 
cgit v1.2.3


From 501c774cb13c3ef8fb7fc5f08fa19473f7d9a0db Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Feb 2010 05:46:50 +0000
Subject: net/macvtap: add vhost support

This adds support for passing a macvtap file descriptor into
vhost-net, much like we already do for tun/tap.

Most of the new code is taken from the respective patch
in the tun driver and may get consolidated in the future.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvtap.c      | 98 ++++++++++++++++++++++++++++++++++++----------
 drivers/vhost/Kconfig      |  2 +-
 drivers/vhost/net.c        |  8 +++-
 include/linux/if_macvlan.h | 13 ++++++
 4 files changed, 97 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index 705099749766..e354501ab297 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -58,6 +58,8 @@ static unsigned int macvtap_major;
 static struct class *macvtap_class;
 static struct cdev macvtap_cdev;
 
+static const struct proto_ops macvtap_socket_ops;
+
 /*
  * RCU usage:
  * The macvtap_queue and the macvlan_dev are loosely coupled, the
@@ -176,7 +178,7 @@ static int macvtap_forward(struct net_device *dev, struct sk_buff *skb)
 		return -ENOLINK;
 
 	skb_queue_tail(&q->sk.sk_receive_queue, skb);
-	wake_up(q->sk.sk_sleep);
+	wake_up_interruptible_poll(q->sk.sk_sleep, POLLIN | POLLRDNORM | POLLRDBAND);
 	return 0;
 }
 
@@ -242,7 +244,7 @@ static void macvtap_sock_write_space(struct sock *sk)
 		return;
 
 	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
-		wake_up_interruptible_sync(sk->sk_sleep);
+		wake_up_interruptible_poll(sk->sk_sleep, POLLOUT | POLLWRNORM | POLLWRBAND);
 }
 
 static int macvtap_open(struct inode *inode, struct file *file)
@@ -270,6 +272,8 @@ static int macvtap_open(struct inode *inode, struct file *file)
 	init_waitqueue_head(&q->sock.wait);
 	q->sock.type = SOCK_RAW;
 	q->sock.state = SS_CONNECTED;
+	q->sock.file = file;
+	q->sock.ops = &macvtap_socket_ops;
 	sock_init_data(&q->sock, &q->sk);
 	q->sk.sk_write_space = macvtap_sock_write_space;
 
@@ -387,32 +391,20 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
 
 	rcu_read_lock_bh();
 	vlan = rcu_dereference(q->vlan);
-	macvlan_count_rx(vlan, len, ret == 0, 0);
+	if (vlan)
+		macvlan_count_rx(vlan, len, ret == 0, 0);
 	rcu_read_unlock_bh();
 
 	return ret ? ret : len;
 }
 
-static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
-				unsigned long count, loff_t pos)
+static ssize_t macvtap_do_read(struct macvtap_queue *q, struct kiocb *iocb,
+			       const struct iovec *iv, unsigned long len,
+			       int noblock)
 {
-	struct file *file = iocb->ki_filp;
-	struct macvtap_queue *q = file->private_data;
-
 	DECLARE_WAITQUEUE(wait, current);
 	struct sk_buff *skb;
-	ssize_t len, ret = 0;
-
-	if (!q) {
-		ret = -ENOLINK;
-		goto out;
-	}
-
-	len = iov_length(iv, count);
-	if (len < 0) {
-		ret = -EINVAL;
-		goto out;
-	}
+	ssize_t ret = 0;
 
 	add_wait_queue(q->sk.sk_sleep, &wait);
 	while (len) {
@@ -421,7 +413,7 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
 		/* Read frames from the queue */
 		skb = skb_dequeue(&q->sk.sk_receive_queue);
 		if (!skb) {
-			if (file->f_flags & O_NONBLOCK) {
+			if (noblock) {
 				ret = -EAGAIN;
 				break;
 			}
@@ -440,7 +432,24 @@ static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
 
 	current->state = TASK_RUNNING;
 	remove_wait_queue(q->sk.sk_sleep, &wait);
+	return ret;
+}
+
+static ssize_t macvtap_aio_read(struct kiocb *iocb, const struct iovec *iv,
+				unsigned long count, loff_t pos)
+{
+	struct file *file = iocb->ki_filp;
+	struct macvtap_queue *q = file->private_data;
+	ssize_t len, ret = 0;
 
+	len = iov_length(iv, count);
+	if (len < 0) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = macvtap_do_read(q, iocb, iv, len, file->f_flags & O_NONBLOCK);
+	ret = min_t(ssize_t, ret, len); /* XXX copied from tun.c. Why? */
 out:
 	return ret;
 }
@@ -538,6 +547,53 @@ static const struct file_operations macvtap_fops = {
 #endif
 };
 
+static int macvtap_sendmsg(struct kiocb *iocb, struct socket *sock,
+			   struct msghdr *m, size_t total_len)
+{
+	struct macvtap_queue *q = container_of(sock, struct macvtap_queue, sock);
+	return macvtap_get_user(q, m->msg_iov, total_len,
+			    m->msg_flags & MSG_DONTWAIT);
+}
+
+static int macvtap_recvmsg(struct kiocb *iocb, struct socket *sock,
+			   struct msghdr *m, size_t total_len,
+			   int flags)
+{
+	struct macvtap_queue *q = container_of(sock, struct macvtap_queue, sock);
+	int ret;
+	if (flags & ~(MSG_DONTWAIT|MSG_TRUNC))
+		return -EINVAL;
+	ret = macvtap_do_read(q, iocb, m->msg_iov, total_len,
+			  flags & MSG_DONTWAIT);
+	if (ret > total_len) {
+		m->msg_flags |= MSG_TRUNC;
+		ret = flags & MSG_TRUNC ? ret : total_len;
+	}
+	return ret;
+}
+
+/* Ops structure to mimic raw sockets with tun */
+static const struct proto_ops macvtap_socket_ops = {
+	.sendmsg = macvtap_sendmsg,
+	.recvmsg = macvtap_recvmsg,
+};
+
+/* Get an underlying socket object from tun file.  Returns error unless file is
+ * attached to a device.  The returned object works like a packet socket, it
+ * can be used for sock_sendmsg/sock_recvmsg.  The caller is responsible for
+ * holding a reference to the file for as long as the socket is in use. */
+struct socket *macvtap_get_socket(struct file *file)
+{
+	struct macvtap_queue *q;
+	if (file->f_op != &macvtap_fops)
+		return ERR_PTR(-EINVAL);
+	q = file->private_data;
+	if (!q)
+		return ERR_PTR(-EBADFD);
+	return &q->sock;
+}
+EXPORT_SYMBOL_GPL(macvtap_get_socket);
+
 static int macvtap_init(void)
 {
 	int err;
diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index 9e9355367bb3..e4e2fd1b5107 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -1,6 +1,6 @@
 config VHOST_NET
 	tristate "Host kernel accelerator for virtio net (EXPERIMENTAL)"
-	depends on NET && EVENTFD && (TUN || !TUN) && EXPERIMENTAL
+	depends on NET && EVENTFD && (TUN || !TUN) && (MACVTAP || !MACVTAP) && EXPERIMENTAL
 	---help---
 	  This kernel module can be loaded in host kernel to accelerate
 	  guest networking with virtio_net. Not to be confused with virtio_net
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 4c8928319e1d..91a324cc2298 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -22,6 +22,7 @@
 #include <linux/if_packet.h>
 #include <linux/if_arp.h>
 #include <linux/if_tun.h>
+#include <linux/if_macvlan.h>
 
 #include <net/sock.h>
 
@@ -452,13 +453,16 @@ err:
 	return ERR_PTR(r);
 }
 
-static struct socket *get_tun_socket(int fd)
+static struct socket *get_tap_socket(int fd)
 {
 	struct file *file = fget(fd);
 	struct socket *sock;
 	if (!file)
 		return ERR_PTR(-EBADF);
 	sock = tun_get_socket(file);
+	if (!IS_ERR(sock))
+		return sock;
+	sock = macvtap_get_socket(file);
 	if (IS_ERR(sock))
 		fput(file);
 	return sock;
@@ -473,7 +477,7 @@ static struct socket *get_socket(int fd)
 	sock = get_raw_socket(fd);
 	if (!IS_ERR(sock))
 		return sock;
-	sock = get_tun_socket(fd);
+	sock = get_tap_socket(fd);
 	if (!IS_ERR(sock))
 		return sock;
 	return ERR_PTR(-ENOTSOCK);
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index f9cb9ba1475d..b78a712247da 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -7,6 +7,19 @@
 #include <linux/netlink.h>
 #include <net/netlink.h>
 
+#if defined(CONFIG_MACVTAP) || defined(CONFIG_MACVTAP_MODULE)
+struct socket *macvtap_get_socket(struct file *);
+#else
+#include <linux/err.h>
+#include <linux/errno.h>
+struct file;
+struct socket;
+static inline struct socket *macvtap_get_socket(struct file *f)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif /* CONFIG_MACVTAP */
+
 struct macvlan_port;
 struct macvtap_queue;
 
-- 
cgit v1.2.3


From b9fb9ee07e67fce0b7bfd517a48710465706c30a Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Feb 2010 05:48:17 +0000
Subject: macvtap: add GSO/csum offload support

Added flags field to macvtap_queue to enable/disable processing of
virtio_net_hdr via IFF_VNET_HDR. This flag is checked to prepend virtio_net_hdr
in the receive path and process/skip virtio_net_hdr in the send path.

Original patch by Sridhar, further changes by Arnd.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/macvtap.c | 206 ++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 182 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index e354501ab297..55ceae09738e 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -17,6 +17,7 @@
 #include <net/net_namespace.h>
 #include <net/rtnetlink.h>
 #include <net/sock.h>
+#include <linux/virtio_net.h>
 
 /*
  * A macvtap queue is the central object of this driver, it connects
@@ -37,6 +38,7 @@ struct macvtap_queue {
 	struct socket sock;
 	struct macvlan_dev *vlan;
 	struct file *file;
+	unsigned int flags;
 };
 
 static struct proto macvtap_proto = {
@@ -276,6 +278,7 @@ static int macvtap_open(struct inode *inode, struct file *file)
 	q->sock.ops = &macvtap_socket_ops;
 	sock_init_data(&q->sock, &q->sk);
 	q->sk.sk_write_space = macvtap_sock_write_space;
+	q->flags = IFF_VNET_HDR | IFF_NO_PI | IFF_TAP;
 
 	err = macvtap_set_queue(dev, file, q);
 	if (err)
@@ -318,6 +321,111 @@ out:
 	return mask;
 }
 
+static inline struct sk_buff *macvtap_alloc_skb(struct sock *sk, size_t prepad,
+						size_t len, size_t linear,
+						int noblock, int *err)
+{
+	struct sk_buff *skb;
+
+	/* Under a page?  Don't bother with paged skb. */
+	if (prepad + len < PAGE_SIZE || !linear)
+		linear = len;
+
+	skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock,
+				   err);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, prepad);
+	skb_put(skb, linear);
+	skb->data_len = len - linear;
+	skb->len += len - linear;
+
+	return skb;
+}
+
+/*
+ * macvtap_skb_from_vnet_hdr and macvtap_skb_to_vnet_hdr should
+ * be shared with the tun/tap driver.
+ */
+static int macvtap_skb_from_vnet_hdr(struct sk_buff *skb,
+				     struct virtio_net_hdr *vnet_hdr)
+{
+	unsigned short gso_type = 0;
+	if (vnet_hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
+		switch (vnet_hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
+		case VIRTIO_NET_HDR_GSO_TCPV4:
+			gso_type = SKB_GSO_TCPV4;
+			break;
+		case VIRTIO_NET_HDR_GSO_TCPV6:
+			gso_type = SKB_GSO_TCPV6;
+			break;
+		case VIRTIO_NET_HDR_GSO_UDP:
+			gso_type = SKB_GSO_UDP;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		if (vnet_hdr->gso_type & VIRTIO_NET_HDR_GSO_ECN)
+			gso_type |= SKB_GSO_TCP_ECN;
+
+		if (vnet_hdr->gso_size == 0)
+			return -EINVAL;
+	}
+
+	if (vnet_hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
+		if (!skb_partial_csum_set(skb, vnet_hdr->csum_start,
+					  vnet_hdr->csum_offset))
+			return -EINVAL;
+	}
+
+	if (vnet_hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
+		skb_shinfo(skb)->gso_size = vnet_hdr->gso_size;
+		skb_shinfo(skb)->gso_type = gso_type;
+
+		/* Header must be checked, and gso_segs computed. */
+		skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY;
+		skb_shinfo(skb)->gso_segs = 0;
+	}
+	return 0;
+}
+
+static int macvtap_skb_to_vnet_hdr(const struct sk_buff *skb,
+				   struct virtio_net_hdr *vnet_hdr)
+{
+	memset(vnet_hdr, 0, sizeof(*vnet_hdr));
+
+	if (skb_is_gso(skb)) {
+		struct skb_shared_info *sinfo = skb_shinfo(skb);
+
+		/* This is a hint as to how much should be linear. */
+		vnet_hdr->hdr_len = skb_headlen(skb);
+		vnet_hdr->gso_size = sinfo->gso_size;
+		if (sinfo->gso_type & SKB_GSO_TCPV4)
+			vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
+		else if (sinfo->gso_type & SKB_GSO_TCPV6)
+			vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
+		else if (sinfo->gso_type & SKB_GSO_UDP)
+			vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP;
+		else
+			BUG();
+		if (sinfo->gso_type & SKB_GSO_TCP_ECN)
+			vnet_hdr->gso_type |= VIRTIO_NET_HDR_GSO_ECN;
+	} else
+		vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		vnet_hdr->flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
+		vnet_hdr->csum_start = skb->csum_start -
+					skb_headroom(skb);
+		vnet_hdr->csum_offset = skb->csum_offset;
+	} /* else everything is zero */
+
+	return 0;
+}
+
+
 /* Get packet from user space buffer */
 static ssize_t macvtap_get_user(struct macvtap_queue *q,
 				const struct iovec *iv, size_t count,
@@ -327,22 +435,53 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q,
 	struct macvlan_dev *vlan;
 	size_t len = count;
 	int err;
+	struct virtio_net_hdr vnet_hdr = { 0 };
+	int vnet_hdr_len = 0;
+
+	if (q->flags & IFF_VNET_HDR) {
+		vnet_hdr_len = sizeof(vnet_hdr);
+
+		err = -EINVAL;
+		if ((len -= vnet_hdr_len) < 0)
+			goto err;
+
+		err = memcpy_fromiovecend((void *)&vnet_hdr, iv, 0,
+					   vnet_hdr_len);
+		if (err < 0)
+			goto err;
+		if ((vnet_hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) &&
+		     vnet_hdr.csum_start + vnet_hdr.csum_offset + 2 >
+							vnet_hdr.hdr_len)
+			vnet_hdr.hdr_len = vnet_hdr.csum_start +
+						vnet_hdr.csum_offset + 2;
+		err = -EINVAL;
+		if (vnet_hdr.hdr_len > len)
+			goto err;
+	}
 
+	err = -EINVAL;
 	if (unlikely(len < ETH_HLEN))
-		return -EINVAL;
+		goto err;
 
-	skb = sock_alloc_send_skb(&q->sk, NET_IP_ALIGN + len, noblock, &err);
+	skb = macvtap_alloc_skb(&q->sk, NET_IP_ALIGN, len, vnet_hdr.hdr_len,
+				noblock, &err);
 	if (!skb)
 		goto err;
 
-	skb_reserve(skb, NET_IP_ALIGN);
-	skb_put(skb, count);
-
-	err = skb_copy_datagram_from_iovec(skb, 0, iv, 0, len);
+	err = skb_copy_datagram_from_iovec(skb, 0, iv, vnet_hdr_len, len);
 	if (err)
-		goto err;
+		goto err_kfree;
 
 	skb_set_network_header(skb, ETH_HLEN);
+	skb_reset_mac_header(skb);
+	skb->protocol = eth_hdr(skb)->h_proto;
+
+	if (vnet_hdr_len) {
+		err = macvtap_skb_from_vnet_hdr(skb, &vnet_hdr);
+		if (err)
+			goto err_kfree;
+	}
+
 	rcu_read_lock_bh();
 	vlan = rcu_dereference(q->vlan);
 	if (vlan)
@@ -353,15 +492,16 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q,
 
 	return count;
 
+err_kfree:
+	kfree_skb(skb);
+
 err:
 	rcu_read_lock_bh();
 	vlan = rcu_dereference(q->vlan);
 	if (vlan)
-		macvlan_count_rx(q->vlan, 0, false, false);
+		netdev_get_tx_queue(vlan->dev, 0)->tx_dropped++;
 	rcu_read_unlock_bh();
 
-	kfree_skb(skb);
-
 	return err;
 }
 
@@ -384,10 +524,25 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
 {
 	struct macvlan_dev *vlan;
 	int ret;
+	int vnet_hdr_len = 0;
+
+	if (q->flags & IFF_VNET_HDR) {
+		struct virtio_net_hdr vnet_hdr;
+		vnet_hdr_len = sizeof (vnet_hdr);
+		if ((len -= vnet_hdr_len) < 0)
+			return -EINVAL;
+
+		ret = macvtap_skb_to_vnet_hdr(skb, &vnet_hdr);
+		if (ret)
+			return ret;
+
+		if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, vnet_hdr_len))
+			return -EFAULT;
+	}
 
 	len = min_t(int, skb->len, len);
 
-	ret = skb_copy_datagram_const_iovec(skb, 0, iv, 0, len);
+	ret = skb_copy_datagram_const_iovec(skb, 0, iv, vnet_hdr_len, len);
 
 	rcu_read_lock_bh();
 	vlan = rcu_dereference(q->vlan);
@@ -395,7 +550,7 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
 		macvlan_count_rx(vlan, len, ret == 0, 0);
 	rcu_read_unlock_bh();
 
-	return ret ? ret : len;
+	return ret ? ret : (len + vnet_hdr_len);
 }
 
 static ssize_t macvtap_do_read(struct macvtap_queue *q, struct kiocb *iocb,
@@ -473,9 +628,14 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 		/* ignore the name, just look at flags */
 		if (get_user(u, &ifr->ifr_flags))
 			return -EFAULT;
-		if (u != (IFF_TAP | IFF_NO_PI))
-			return -EINVAL;
-		return 0;
+
+		ret = 0;
+		if ((u & ~IFF_VNET_HDR) != (IFF_NO_PI | IFF_TAP))
+			ret = -EINVAL;
+		else
+			q->flags = u;
+
+		return ret;
 
 	case TUNGETIFF:
 		rcu_read_lock_bh();
@@ -489,13 +649,13 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 
 		ret = 0;
 		if (copy_to_user(&ifr->ifr_name, q->vlan->dev->name, IFNAMSIZ) ||
-		    put_user((TUN_TAP_DEV | TUN_NO_PI), &ifr->ifr_flags))
+		    put_user(q->flags, &ifr->ifr_flags))
 			ret = -EFAULT;
 		dev_put(vlan->dev);
 		return ret;
 
 	case TUNGETFEATURES:
-		if (put_user((IFF_TAP | IFF_NO_PI), up))
+		if (put_user(IFF_TAP | IFF_NO_PI | IFF_VNET_HDR, up))
 			return -EFAULT;
 		return 0;
 
@@ -509,15 +669,13 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd,
 	case TUNSETOFFLOAD:
 		/* let the user check for future flags */
 		if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
-			  TUN_F_TSO_ECN | TUN_F_UFO))
-			return -EINVAL;
-
-		/* TODO: add support for these, so far we don't
-			 support any offload */
-		if (arg & (TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
-			 TUN_F_TSO_ECN | TUN_F_UFO))
+			    TUN_F_TSO_ECN | TUN_F_UFO))
 			return -EINVAL;
 
+		/* TODO: only accept frames with the features that
+			 got enabled for forwarded frames */
+		if (!(q->flags & IFF_VNET_HDR))
+			return  -EINVAL;
 		return 0;
 
 	default:
-- 
cgit v1.2.3


From bf473a268af5d19c3730742a0c4f9aca274843da Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 22:55:07 +0000
Subject: depca: remove forgotten needless inicialization

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/depca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 64a569bc92a6..744c1928dfca 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -1272,7 +1272,7 @@ static void set_multicast_list(struct net_device *dev)
 static void SetMulticastFilter(struct net_device *dev)
 {
 	struct depca_private *lp = netdev_priv(dev);
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
 	int i, j, bit, byte;
 	u16 hashcode;
-- 
cgit v1.2.3


From 59ce25d9eb2e17b901a404766f9e134759407d26 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 23:12:15 +0000
Subject: 3c5xx: use netdev_mc_* helpers

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/3c501.c | 2 +-
 drivers/net/3c505.c | 9 ++++-----
 drivers/net/3c515.c | 2 +-
 drivers/net/3c523.c | 9 ++++-----
 drivers/net/3c527.c | 8 ++------
 drivers/net/3c59x.c | 2 +-
 6 files changed, 13 insertions(+), 19 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 4d4cad393dce..b6de7b1e2a5c 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -812,7 +812,7 @@ static void set_multicast_list(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {
 		outb(RX_PROM, RX_CMD);
 		inb(RX_STATUS);
-	} else if (dev->mc_list || dev->flags & IFF_ALLMULTI) {
+	} else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
 		/* Multicast or all multicast is the same */
 		outb(RX_MULT, RX_CMD);
 		inb(RX_STATUS);		/* Clear status. */
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index dadb46a8833a..04b5bba19021 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -1216,7 +1216,7 @@ static int elp_close(struct net_device *dev)
 static void elp_set_mc_list(struct net_device *dev)
 {
 	elp_device *adapter = netdev_priv(dev);
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	int i;
 	unsigned long flags;
 
@@ -1230,10 +1230,9 @@ static void elp_set_mc_list(struct net_device *dev)
 		/* if num_addrs==0 the list will be cleared */
 		adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST;
 		adapter->tx_pcb.length = 6 * netdev_mc_count(dev);
-		for (i = 0; i < netdev_mc_count(dev); i++) {
-			memcpy(adapter->tx_pcb.data.multicast[i], dmi->dmi_addr, 6);
-			dmi = dmi->next;
-		}
+		i = 0;
+		netdev_for_each_mc_addr(dmi, dev)
+			memcpy(adapter->tx_pcb.data.multicast[i++], dmi->dmi_addr, 6);
 		adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
 		if (!send_pcb(dev, &adapter->tx_pcb))
 			pr_err("%s: couldn't send set_multicast command\n", dev->name);
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 063b049ffe55..1e898b1c8068 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -1536,7 +1536,7 @@ static void set_rx_mode(struct net_device *dev)
 			pr_debug("%s: Setting promiscuous mode.\n",
 			       dev->name);
 		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
-	} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
+	} else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
 		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
 	} else
 		new_mode = SetRxFilter | RxStation | RxBroadcast;
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 6948d667fc5e..beed4fa10c6e 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -625,7 +625,7 @@ static int init586(struct net_device *dev)
 	volatile struct iasetup_cmd_struct *ias_cmd;
 	volatile struct tdr_cmd_struct *tdr_cmd;
 	volatile struct mcsetup_cmd_struct *mc_cmd;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	int num_addrs = netdev_mc_count(dev);
 
 	ptr = (void *) ((char *) p->scb + sizeof(struct scb_struct));
@@ -787,10 +787,9 @@ static int init586(struct net_device *dev)
 			mc_cmd->cmd_cmd = CMD_MCSETUP | CMD_LAST;
 			mc_cmd->cmd_link = 0xffff;
 			mc_cmd->mc_cnt = num_addrs * 6;
-			for (i = 0; i < num_addrs; i++) {
-				memcpy((char *) mc_cmd->mc_list[i], dmi->dmi_addr, 6);
-				dmi = dmi->next;
-			}
+			i = 0;
+			netdev_for_each_mc_addr(dmi, dev)
+				memcpy((char *) mc_cmd->mc_list[i++], dmi->dmi_addr, 6);
 			p->scb->cbl_offset = make16(mc_cmd);
 			p->scb->cmd = CUC_START;
 			elmc_id_attn586();
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index ce9826980517..5c07b147ec99 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -1533,9 +1533,7 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 	{
 		unsigned char block[62];
 		unsigned char *bp;
-		struct dev_mc_list *dmc=dev->mc_list;
-
-		int i;
+		struct dev_mc_list *dmc;
 
 		if(retry==0)
 			lp->mc_list_valid = 0;
@@ -1545,11 +1543,9 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 			block[0]=netdev_mc_count(dev);
 			bp=block+2;
 
-			for(i=0;i<netdev_mc_count(dev);i++)
-			{
+			netdev_for_each_mc_addr(dmc, dev) {
 				memcpy(bp, dmc->dmi_addr, 6);
 				bp+=6;
-				dmc=dmc->next;
 			}
 			if(mc32_command_nowait(dev, 2, block,
 					       2+6*netdev_mc_count(dev))==-1)
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 5df46c230b07..f965431f4924 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -2970,7 +2970,7 @@ static void set_rx_mode(struct net_device *dev)
 		if (vortex_debug > 3)
 			pr_notice("%s: Setting promiscuous mode.\n", dev->name);
 		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
-	} else	if ((dev->mc_list)  ||  (dev->flags & IFF_ALLMULTI)) {
+	} else	if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
 		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
 	} else
 		new_mode = SetRxFilter | RxStation | RxBroadcast;
-- 
cgit v1.2.3


From 2a0d18f97cc15d57ad0c93259a3df4cb72c5a28b Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Wed, 17 Feb 2010 23:22:38 +0000
Subject: smsc911x: convert to use netdev_for_each_mc_addr

also removed unnecessary checks

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smsc911x.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 13c0b76dec41..4fd1d8b38788 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1383,29 +1383,20 @@ static void smsc911x_set_multicast_list(struct net_device *dev)
 		/* Enabling specific multicast addresses */
 		unsigned int hash_high = 0;
 		unsigned int hash_low = 0;
-		unsigned int count = 0;
-		struct dev_mc_list *mc_list = dev->mc_list;
+		struct dev_mc_list *mc_list;
 
 		pdata->set_bits_mask = MAC_CR_HPFILT_;
 		pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_);
 
-		while (mc_list) {
-			count++;
-			if ((mc_list->dmi_addrlen) == ETH_ALEN) {
-				unsigned int bitnum =
-				    smsc911x_hash(mc_list->dmi_addr);
-				unsigned int mask = 0x01 << (bitnum & 0x1F);
-				if (bitnum & 0x20)
-					hash_high |= mask;
-				else
-					hash_low |= mask;
-			} else {
-				SMSC_WARNING(DRV, "dmi_addrlen != 6");
-			}
-			mc_list = mc_list->next;
+		netdev_for_each_mc_addr(mc_list, dev) {
+			unsigned int bitnum = smsc911x_hash(mc_list->dmi_addr);
+			unsigned int mask = 0x01 << (bitnum & 0x1F);
+
+			if (bitnum & 0x20)
+				hash_high |= mask;
+			else
+				hash_low |= mask;
 		}
-		if (count != (unsigned int)netdev_mc_count(dev))
-			SMSC_WARNING(DRV, "mc_count != dev->mc_count");
 
 		pdata->hashhi = hash_high;
 		pdata->hashlo = hash_low;
-- 
cgit v1.2.3


From 5508590c193661bc1484ad7b952af5fceacea40d Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 18 Feb 2010 00:42:54 +0000
Subject: net: convert multiple drivers to use netdev_for_each_mc_addr, part2

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/s2io.c                  |  5 +++--
 drivers/net/sb1250-mac.c            |  6 +++---
 drivers/net/sc92031.c               |  2 +-
 drivers/net/sfc/efx.c               |  6 ++----
 drivers/net/sis190.c                |  4 +---
 drivers/net/sis900.c                |  5 ++---
 drivers/net/skfp/skfddi.c           | 10 +++-------
 drivers/net/skge.c                  | 10 ++++------
 drivers/net/sky2.c                  |  5 ++---
 drivers/net/smsc9420.c              |  5 ++---
 drivers/net/sonic.c                 |  7 ++++---
 drivers/net/spider_net.c            |  2 +-
 drivers/net/starfire.c              |  4 ++--
 drivers/net/stmmac/dwmac100.c       |  4 +---
 drivers/net/stmmac/dwmac1000_core.c |  4 +---
 drivers/net/sun3_82586.c            |  8 +++++---
 drivers/net/sunbmac.c               |  5 ++---
 drivers/net/sundance.c              |  3 +--
 drivers/net/sungem.c                | 10 +++-------
 drivers/net/sunhme.c                | 20 ++++++--------------
 drivers/net/sunlance.c              |  6 ++----
 drivers/net/sunqe.c                 |  9 +++------
 drivers/net/sunvnet.c               |  2 +-
 23 files changed, 55 insertions(+), 87 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 102be16e9b52..43bc66aa8405 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -5092,8 +5092,8 @@ static void s2io_set_multicast(struct net_device *dev)
 		}
 
 		/* Create the new Rx filter list and update the same in H/W. */
-		for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		i = 0;
+		netdev_for_each_mc_addr(mclist, dev) {
 			memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
 			       ETH_ALEN);
 			mac_addr = 0;
@@ -5121,6 +5121,7 @@ static void s2io_set_multicast(struct net_device *dev)
 					  dev->name);
 				return;
 			}
+			i++;
 		}
 	}
 }
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 564d4d7f855b..9944e5d662c0 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2161,13 +2161,13 @@ static void sbmac_setmulti(struct sbmac_softc *sc)
 	 * XXX if the table overflows */
 
 	idx = 1;		/* skip station address */
-	mclist = dev->mc_list;
-	while (mclist && (idx < MAC_ADDR_COUNT)) {
+	netdev_for_each_mc_addr(mclist, dev) {
+		if (idx == MAC_ADDR_COUNT)
+			break;
 		reg = sbmac_addr2reg(mclist->dmi_addr);
 		port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t));
 		__raw_writeq(reg, port);
 		idx++;
-		mclist = mclist->next;
 	}
 
 	/*
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 00ff8995ad69..d87c4787fffa 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -435,7 +435,7 @@ static void _sc92031_set_mar(struct net_device *dev)
 	else if (dev->flags & IFF_MULTICAST) {
 		struct dev_mc_list *mc_list;
 
-		for (mc_list = dev->mc_list; mc_list; mc_list = mc_list->next) {
+		netdev_for_each_mc_addr(mc_list, dev) {
 			u32 crc;
 			unsigned bit = 0;
 
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index dc58d9fd0f32..88f2fb193abe 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1602,11 +1602,10 @@ static int efx_set_mac_address(struct net_device *net_dev, void *data)
 static void efx_set_multicast_list(struct net_device *net_dev)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	struct dev_mc_list *mc_list = net_dev->mc_list;
+	struct dev_mc_list *mc_list;
 	union efx_multicast_hash *mc_hash = &efx->multicast_hash;
 	u32 crc;
 	int bit;
-	int i;
 
 	efx->promiscuous = !!(net_dev->flags & IFF_PROMISC);
 
@@ -1615,11 +1614,10 @@ static void efx_set_multicast_list(struct net_device *net_dev)
 		memset(mc_hash, 0xff, sizeof(*mc_hash));
 	} else {
 		memset(mc_hash, 0x00, sizeof(*mc_hash));
-		for (i = 0; i < netdev_mc_count(net_dev); i++) {
+		netdev_for_each_mc_addr(mc_list, net_dev) {
 			crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr);
 			bit = crc & (EFX_MCAST_HASH_ENTRIES - 1);
 			set_bit_le(bit, mc_hash->byte);
-			mc_list = mc_list->next;
 		}
 
 		/* Broadcast packets go through the multicast hash filter.
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index bf2ffbb913ff..ead1d31308f8 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -849,12 +849,10 @@ static void sis190_set_rx_mode(struct net_device *dev)
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
 	} else {
 		struct dev_mc_list *mclist;
-		unsigned int i;
 
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit_nr =
 				ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 32ae87c09f5e..cc0c731c4f09 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -2300,9 +2300,8 @@ static void set_rx_mode(struct net_device *net_dev)
 		 * packets */
 		struct dev_mc_list *mclist;
 		rx_mode = RFAAB;
-		for (i = 0, mclist = net_dev->mc_list;
-			mclist && i < netdev_mc_count(net_dev);
-			i++, mclist = mclist->next) {
+
+		netdev_for_each_mc_addr(mclist, net_dev) {
 			unsigned int bit_nr =
 				sis900_mcast_bitnr(mclist->dmi_addr, sis_priv->chipset_rev);
 			mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf));
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 346adfae986f..1921a54ea995 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -852,8 +852,7 @@ static void skfp_ctl_set_multicast_list(struct net_device *dev)
 static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 {
 	struct s_smc *smc = netdev_priv(dev);
-	struct dev_mc_list *dmi;	/* ptr to multicast addr entry */
-	int i;
+	struct dev_mc_list *dmi;
 
 	/* Enable promiscuous mode, if necessary */
 	if (dev->flags & IFF_PROMISC) {
@@ -877,17 +876,14 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 				/* use exact filtering */
 
 				// point to first multicast addr
-				dmi = dev->mc_list;
-
-				for (i = 0; i < netdev_mc_count(dev); i++) {
+				netdev_for_each_mc_addr(dmi, dev) {
 					mac_add_multicast(smc, 
 							  (struct fddi_addr *)dmi->dmi_addr, 
 							  1);
 
 					pr_debug(KERN_INFO "ENABLE MC ADDRESS: %pMF\n",
 						dmi->dmi_addr);
-					dmi = dmi->next;
-				}	// for
+				}
 
 			} else {	// more MC addresses than HW supports
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 720af1c7854b..d0058e5bb6ae 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2917,8 +2917,7 @@ static void genesis_set_multicast(struct net_device *dev)
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
-	int i, count = netdev_mc_count(dev);
-	struct dev_mc_list *list = dev->mc_list;
+	struct dev_mc_list *list;
 	u32 mode;
 	u8 filter[8];
 
@@ -2938,7 +2937,7 @@ static void genesis_set_multicast(struct net_device *dev)
 		    skge->flow_status == FLOW_STAT_SYMMETRIC)
 			genesis_add_filter(filter, pause_mc_addr);
 
-		for (i = 0; list && i < count; i++, list = list->next)
+		netdev_for_each_mc_addr(list, dev)
 			genesis_add_filter(filter, list->dmi_addr);
 	}
 
@@ -2957,7 +2956,7 @@ static void yukon_set_multicast(struct net_device *dev)
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
-	struct dev_mc_list *list = dev->mc_list;
+	struct dev_mc_list *list;
 	int rx_pause = (skge->flow_status == FLOW_STAT_REM_SEND ||
 			skge->flow_status == FLOW_STAT_SYMMETRIC);
 	u16 reg;
@@ -2975,13 +2974,12 @@ static void yukon_set_multicast(struct net_device *dev)
 	else if (netdev_mc_empty(dev) && !rx_pause)/* no multicast */
 		reg &= ~GM_RXCR_MCF_ENA;
 	else {
-		int i;
 		reg |= GM_RXCR_MCF_ENA;
 
 		if (rx_pause)
 			yukon_add_filter(filter, pause_mc_addr);
 
-		for (i = 0; list && i < netdev_mc_count(dev); i++, list = list->next)
+		netdev_for_each_mc_addr(list, dev)
 			yukon_add_filter(filter, list->dmi_addr);
 	}
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index d1e98e2170ce..653bdd76ef46 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3621,7 +3621,7 @@ static void sky2_set_multicast(struct net_device *dev)
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	struct dev_mc_list *list = dev->mc_list;
+	struct dev_mc_list *list;
 	u16 reg;
 	u8 filter[8];
 	int rx_pause;
@@ -3640,13 +3640,12 @@ static void sky2_set_multicast(struct net_device *dev)
 	else if (netdev_mc_empty(dev) && !rx_pause)
 		reg &= ~GM_RXCR_MCF_ENA;
 	else {
-		int i;
 		reg |= GM_RXCR_MCF_ENA;
 
 		if (rx_pause)
 			sky2_add_filter(filter, pause_mc_addr);
 
-		for (i = 0; list && i < netdev_mc_count(dev); i++, list = list->next)
+		netdev_for_each_mc_addr(list, dev)
 			sky2_add_filter(filter, list->dmi_addr);
 	}
 
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 2bd3c986559a..30110a11d737 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1063,11 +1063,11 @@ static void smsc9420_set_multicast_list(struct net_device *dev)
 		mac_cr |= MAC_CR_MCPAS_;
 		mac_cr &= (~MAC_CR_HPFILT_);
 	} else if (!netdev_mc_empty(dev)) {
-		struct dev_mc_list *mc_list = dev->mc_list;
+		struct dev_mc_list *mc_list;
 		u32 hash_lo = 0, hash_hi = 0;
 
 		smsc_dbg(HW, "Multicast filter enabled");
-		while (mc_list) {
+		netdev_for_each_mc_addr(mc_list, dev) {
 			u32 bit_num = smsc9420_hash(mc_list->dmi_addr);
 			u32 mask = 1 << (bit_num & 0x1F);
 
@@ -1076,7 +1076,6 @@ static void smsc9420_set_multicast_list(struct net_device *dev)
 			else
 				hash_lo |= mask;
 
-			mc_list = mc_list->next;
 		}
 		smsc9420_reg_write(pd, HASHH, hash_hi);
 		smsc9420_reg_write(pd, HASHL, hash_lo);
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index bd8bc66f2e00..287c251075e5 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -531,7 +531,7 @@ static void sonic_multicast_list(struct net_device *dev)
 {
 	struct sonic_local *lp = netdev_priv(dev);
 	unsigned int rcr;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	unsigned char *addr;
 	int i;
 
@@ -549,13 +549,14 @@ static void sonic_multicast_list(struct net_device *dev)
 				printk("sonic_multicast_list: mc_count %d\n",
 				       netdev_mc_count(dev));
 			sonic_set_cam_enable(dev, 1);  /* always enable our own address */
-			for (i = 1; i <= netdev_mc_count(dev); i++) {
+			i = 1;
+			netdev_for_each_mc_addr(dmi, dev) {
 				addr = dmi->dmi_addr;
-				dmi = dmi->next;
 				sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]);
 				sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]);
 				sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]);
 				sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i));
+				i++;
 			}
 			SONIC_WRITE(SONIC_CDC, 16);
 			/* issue Load CAM command */
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 16191998ac67..2f8a8c32021e 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -646,7 +646,7 @@ spider_net_set_multi(struct net_device *netdev)
 	hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
 	set_bit(0xfd, bitmask);
 
-	for (mc = netdev->mc_list; mc; mc = mc->next) {
+	netdev_for_each_mc_addr(mc, netdev) {
 		hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr);
 		set_bit(hash, bitmask);
 	}
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 58bc7ac086cf..0f405ef51858 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1804,14 +1804,14 @@ static void set_rx_mode(struct net_device *dev)
 		/* Use the 16 element perfect filter, skip first two entries. */
 		void __iomem *filter_addr = ioaddr + PerfFilterTable + 2 * 16;
 		__be16 *eaddrs;
-		for (i = 2, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev) + 2;
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			eaddrs = (__be16 *)mclist->dmi_addr;
 			writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 4;
 			writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4;
 			writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 8;
 		}
 		eaddrs = (__be16 *)dev->dev_addr;
+		i = netdev_mc_count(dev) + 2;
 		while (i++ < 16) {
 			writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 4;
 			writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4;
diff --git a/drivers/net/stmmac/dwmac100.c b/drivers/net/stmmac/dwmac100.c
index 576b256ee388..803b0373d843 100644
--- a/drivers/net/stmmac/dwmac100.c
+++ b/drivers/net/stmmac/dwmac100.c
@@ -315,7 +315,6 @@ static void dwmac100_set_filter(struct net_device *dev)
 		value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
 			   MAC_CONTROL_HO | MAC_CONTROL_HP);
 	} else {
-		int i;
 		u32 mc_filter[2];
 		struct dev_mc_list *mclist;
 
@@ -326,8 +325,7 @@ static void dwmac100_set_filter(struct net_device *dev)
 			   MAC_CONTROL_IF | MAC_CONTROL_HO);
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < netdev_mc_count(dev); i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			/* The upper 6 bits of the calculated CRC are used to
 			 * index the contens of the hash table */
 			int bit_nr =
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
index 90dbb4f41ef3..a6538ae4694c 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -93,7 +93,6 @@ static void dwmac1000_set_filter(struct net_device *dev)
 		writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
 		writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
 	} else if (!netdev_mc_empty(dev)) {
-		int i;
 		u32 mc_filter[2];
 		struct dev_mc_list *mclist;
 
@@ -101,8 +100,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
 		value = GMAC_FRAME_FILTER_HMC;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < netdev_mc_count(dev); i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			/* The upper 6 bits of the calculated CRC are used to
 			   index the contens of the hash table */
 			int bit_nr =
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index efedc252e4be..2f6a760e5f21 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -413,7 +413,7 @@ static int init586(struct net_device *dev)
 	volatile struct iasetup_cmd_struct *ias_cmd;
 	volatile struct tdr_cmd_struct *tdr_cmd;
 	volatile struct mcsetup_cmd_struct *mc_cmd;
-	struct dev_mc_list *dmi=dev->mc_list;
+	struct dev_mc_list *dmi;
 	int num_addrs=netdev_mc_count(dev);
 
 	ptr = (void *) ((char *)p->scb + sizeof(struct scb_struct));
@@ -536,8 +536,10 @@ static int init586(struct net_device *dev)
 		mc_cmd->cmd_link = 0xffff;
 		mc_cmd->mc_cnt = swab16(num_addrs * 6);
 
-		for(i=0;i<num_addrs;i++,dmi=dmi->next)
-			memcpy((char *) mc_cmd->mc_list[i], dmi->dmi_addr,6);
+		i = 0;
+		netdev_for_each_mc_addr(dmi, dev)
+			memcpy((char *) mc_cmd->mc_list[i++],
+			       dmi->dmi_addr, ETH_ALEN);
 
 		p->scb->cbl_offset = make16(mc_cmd);
 		p->scb->cmd_cuc = CUC_START;
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index dfea56fa39e3..a0bd361d5eca 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -999,7 +999,7 @@ static void bigmac_set_multicast(struct net_device *dev)
 {
 	struct bigmac *bp = netdev_priv(dev);
 	void __iomem *bregs = bp->bregs;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
 	int i;
 	u32 tmp, crc;
@@ -1028,9 +1028,8 @@ static void bigmac_set_multicast(struct net_device *dev)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < netdev_mc_count(dev); i++) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 
 			if (!(*addrs & 1))
 				continue;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 4171259590b2..a855934dfc3b 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1528,8 +1528,7 @@ static void set_rx_mode(struct net_device *dev)
 		int index;
 		int crc;
 		memset (mc_filter, 0, sizeof (mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			crc = ether_crc_le (ETH_ALEN, mclist->dmi_addr);
 			for (index=0, bit=0; bit < 6; bit++, crc <<= 1)
 				if (crc & 0x80000000) index |= 1 << bit;
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index d497ec053953..4344017bfaef 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1846,17 +1846,13 @@ static u32 gem_setup_multicast(struct gem *gp)
 	} else {
 		u16 hash_table[16];
 		u32 crc;
-		struct dev_mc_list *dmi = gp->dev->mc_list;
+		struct dev_mc_list *dmi;
 		int i;
 
-		for (i = 0; i < 16; i++)
-			hash_table[i] = 0;
-
-		for (i = 0; i < netdev_mc_count(gp->dev); i++) {
+		memset(hash_table, 0, sizeof(hash_table));
+		netdev_for_each_mc_addr(dmi, gp->dev) {
 			char *addrs = dmi->dmi_addr;
 
-			dmi = dmi->next;
-
 			if (!(*addrs & 1))
 				continue;
 
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 905df35ff78a..b17dbb11bd67 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1523,17 +1523,13 @@ static int happy_meal_init(struct happy_meal *hp)
 		hme_write32(hp, bregs + BMAC_HTABLE3, 0xffff);
 	} else if ((hp->dev->flags & IFF_PROMISC) == 0) {
 		u16 hash_table[4];
-		struct dev_mc_list *dmi = hp->dev->mc_list;
+		struct dev_mc_list *dmi;
 		char *addrs;
-		int i;
 		u32 crc;
 
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
-
-		for (i = 0; i < netdev_mc_count(hp->dev); i++) {
+		memset(hash_table, 0, sizeof(hash_table));
+		netdev_for_each_mc_addr(dmi, hp->dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 
 			if (!(*addrs & 1))
 				continue;
@@ -2366,9 +2362,8 @@ static void happy_meal_set_multicast(struct net_device *dev)
 {
 	struct happy_meal *hp = netdev_priv(dev);
 	void __iomem *bregs = hp->bigmacregs;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
-	int i;
 	u32 crc;
 
 	spin_lock_irq(&hp->happy_lock);
@@ -2384,12 +2379,9 @@ static void happy_meal_set_multicast(struct net_device *dev)
 	} else {
 		u16 hash_table[4];
 
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
-
-		for (i = 0; i < netdev_mc_count(dev); i++) {
+		memset(hash_table, 0, sizeof(hash_table));
+		netdev_for_each_mc_addr(dmi, dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 
 			if (!(*addrs & 1))
 				continue;
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index cf9d5bb9e1e9..d7c73f478ef5 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1170,9 +1170,8 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 static void lance_load_multicast(struct net_device *dev)
 {
 	struct lance_private *lp = netdev_priv(dev);
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
-	int i;
 	u32 crc;
 	u32 val;
 
@@ -1196,9 +1195,8 @@ static void lance_load_multicast(struct net_device *dev)
 		return;
 
 	/* Add addresses */
-	for (i = 0; i < netdev_mc_count(dev); i++) {
+	netdev_for_each_mc_addr(dmi, dev) {
 		addrs = dmi->dmi_addr;
-		dmi   = dmi->next;
 
 		/* multicast address? */
 		if (!(*addrs & 1))
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 3bc35d86ed66..be637dce944c 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -627,7 +627,7 @@ static int qe_start_xmit(struct sk_buff *skb, struct net_device *dev)
 static void qe_set_multicast(struct net_device *dev)
 {
 	struct sunqe *qep = netdev_priv(dev);
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	u8 new_mconfig = qep->mconfig;
 	char *addrs;
 	int i;
@@ -650,12 +650,9 @@ static void qe_set_multicast(struct net_device *dev)
 		u16 hash_table[4];
 		u8 *hbytes = (unsigned char *) &hash_table[0];
 
-		for (i = 0; i < 4; i++)
-			hash_table[i] = 0;
-
-		for (i = 0; i < netdev_mc_count(dev); i++) {
+		memset(hash_table, 0, sizeof(hash_table));
+		netdev_for_each_mc_addr(dmi, dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 
 			if (!(*addrs & 1))
 				continue;
diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index d65764ea1d83..6b1b7cea7f6b 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -765,7 +765,7 @@ static void __update_mc_list(struct vnet *vp, struct net_device *dev)
 {
 	struct dev_addr_list *p;
 
-	for (p = dev->mc_list; p; p = p->next) {
+	netdev_for_each_mc_addr(p, dev) {
 		struct vnet_mcast_entry *m;
 
 		m = __vnet_mc_find(vp, p->dmi_addr);
-- 
cgit v1.2.3


From 4302b67e041ea81c8fc233bee1296516e1294a27 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 18 Feb 2010 03:34:54 +0000
Subject: tulip: convert to use netdev_for_each_mc_addr

also bug in de2104x.c was corrected:
for (i = 0; i < 32; i++) loop should be outside mc_list iteration.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/de2104x.c     | 19 ++++++++-----------
 drivers/net/tulip/de4x5.c       | 14 ++++++--------
 drivers/net/tulip/dmfe.c        | 27 +++++++++++++--------------
 drivers/net/tulip/tulip_core.c  | 15 ++++-----------
 drivers/net/tulip/uli526x.c     |  4 ++--
 drivers/net/tulip/winbond-840.c |  6 ++----
 6 files changed, 35 insertions(+), 50 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index a4cff23dcdf9..cb429723b2c8 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -677,18 +677,17 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
 	memset(hash_table, 0, sizeof(hash_table));
 	set_bit_le(255, hash_table); 			/* Broadcast entry */
 	/* This should work on big-endian machines as well. */
-	for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-	     i++, mclist = mclist->next) {
+	netdev_for_each_mc_addr(mclist, dev) {
 		int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
 
 		set_bit_le(index, hash_table);
+	}
 
-		for (i = 0; i < 32; i++) {
-			*setup_frm++ = hash_table[i];
-			*setup_frm++ = hash_table[i];
-		}
-		setup_frm = &de->setup_frame[13*6];
+	for (i = 0; i < 32; i++) {
+		*setup_frm++ = hash_table[i];
+		*setup_frm++ = hash_table[i];
 	}
+	setup_frm = &de->setup_frame[13*6];
 
 	/* Fill the final entry with our physical address. */
 	eaddrs = (u16 *)dev->dev_addr;
@@ -701,20 +700,18 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
 {
 	struct de_private *de = netdev_priv(dev);
 	struct dev_mc_list *mclist;
-	int i;
 	u16 *eaddrs;
 
 	/* We have <= 14 addresses so we can use the wonderful
 	   16 address perfect filtering of the Tulip. */
-	for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
-	     i++, mclist = mclist->next) {
+	netdev_for_each_mc_addr(mclist, dev) {
 		eaddrs = (u16 *)mclist->dmi_addr;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
 	}
 	/* Fill the unused entries with the broadcast address. */
-	memset(setup_frm, 0xff, (15-i)*12);
+	memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
 	setup_frm = &de->setup_frame[15*6];
 
 	/* Fill the final entry with our physical address. */
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 0b6a9731091c..c4ecb9a95409 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1951,9 +1951,9 @@ static void
 SetMulticastFilter(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
-    struct dev_mc_list *dmi=dev->mc_list;
+    struct dev_mc_list *dmi;
     u_long iobase = dev->base_addr;
-    int i, j, bit, byte;
+    int i, bit, byte;
     u16 hashcode;
     u32 omr, crc;
     char *pa;
@@ -1966,9 +1966,8 @@ SetMulticastFilter(struct net_device *dev)
     if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) {
 	omr |= OMR_PM;                       /* Pass all multicasts */
     } else if (lp->setup_f == HASH_PERF) {   /* Hash Filtering */
-	for (i = 0; i < netdev_mc_count(dev) ;i++) {
-	    addrs=dmi->dmi_addr;
-	    dmi=dmi->next;
+	netdev_for_each_mc_addr(dmi, dev) {
+	    addrs = dmi->dmi_addr;
 	    if ((*addrs & 0x01) == 1) {      /* multicast address? */
 		crc = ether_crc_le(ETH_ALEN, addrs);
 		hashcode = crc & HASH_BITS;  /* hashcode is 9 LSb of CRC */
@@ -1984,9 +1983,8 @@ SetMulticastFilter(struct net_device *dev)
 	    }
 	}
     } else {                                 /* Perfect filtering */
-	for (j=0; j<netdev_mc_count(dev); j++) {
-	    addrs=dmi->dmi_addr;
-	    dmi=dmi->next;
+	netdev_for_each_mc_addr(dmi, dev) {
+	    addrs = dmi->dmi_addr;
 	    for (i=0; i<ETH_ALEN; i++) {
 		*(pa + (i&1)) = *addrs++;
 		if (i & 0x01) pa += 4;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 534afbdb9c91..95b38d803e9b 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -330,8 +330,8 @@ static void poll_dmfe (struct net_device *dev);
 static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
 static void allocate_rx_buffer(struct dmfe_board_info *);
 static void update_cr6(u32, unsigned long);
-static void send_filter_frame(struct DEVICE * ,int);
-static void dm9132_id_table(struct DEVICE * ,int);
+static void send_filter_frame(struct DEVICE *);
+static void dm9132_id_table(struct DEVICE *);
 static u16 phy_read(unsigned long, u8, u8, u32);
 static void phy_write(unsigned long, u8, u8, u16, u32);
 static void phy_write_1bit(unsigned long, u32);
@@ -658,9 +658,9 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
 
 	/* Send setup frame */
 	if (db->chip_id == PCI_DM9132_ID)
-		dm9132_id_table(dev, netdev_mc_count(dev));	/* DM9132 */
+		dm9132_id_table(dev);	/* DM9132 */
 	else
-		send_filter_frame(dev, netdev_mc_count(dev));	/* DM9102/DM9102A */
+		send_filter_frame(dev);	/* DM9102/DM9102A */
 
 	/* Init CR7, interrupt active bit */
 	db->cr7_data = CR7_DEFAULT;
@@ -1075,9 +1075,9 @@ static void dmfe_set_filter_mode(struct DEVICE * dev)
 
 	DMFE_DBUG(0, "Set multicast address", mc_count);
 	if (db->chip_id == PCI_DM9132_ID)
-		dm9132_id_table(dev, mc_count);		/* DM9132 */
+		dm9132_id_table(dev);	/* DM9132 */
 	else
-		send_filter_frame(dev, mc_count);	/* DM9102/DM9102A */
+		send_filter_frame(dev);	/* DM9102/DM9102A */
 	spin_unlock_irqrestore(&db->lock, flags);
 }
 
@@ -1452,7 +1452,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
  *	This setup frame initilize DM910X address filter mode
 */
 
-static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
+static void dm9132_id_table(struct DEVICE *dev)
 {
 	struct dev_mc_list *mcptr;
 	u16 * addrptr;
@@ -1472,15 +1472,14 @@ static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
 	ioaddr += 4;
 
 	/* Clear Hash Table */
-	for (i = 0; i < 4; i++)
-		hash_table[i] = 0x0;
+	memset(hash_table, 0, sizeof(hash_table));
 
 	/* broadcast address */
 	hash_table[3] = 0x8000;
 
 	/* the multicast address in Hash Table : 64 bits */
-	for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
-		hash_val = cal_CRC( (char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+	netdev_for_each_mc_addr(mcptr, dev) {
+		hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
 		hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
 	}
 
@@ -1495,7 +1494,7 @@ static void dm9132_id_table(struct DEVICE *dev, int mc_cnt)
  *	This setup frame initilize DM910X address filter mode
  */
 
-static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
+static void send_filter_frame(struct DEVICE *dev)
 {
 	struct dmfe_board_info *db = netdev_priv(dev);
 	struct dev_mc_list *mcptr;
@@ -1521,14 +1520,14 @@ static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
 	*suptr++ = 0xffff;
 
 	/* fit the multicast address */
-	for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+	netdev_for_each_mc_addr(mcptr, dev) {
 		addrptr = (u16 *) mcptr->dmi_addr;
 		*suptr++ = addrptr[0];
 		*suptr++ = addrptr[1];
 		*suptr++ = addrptr[2];
 	}
 
-	for (; i<14; i++) {
+	for (i = netdev_mc_count(dev); i < 14; i++) {
 		*suptr++ = 0xffff;
 		*suptr++ = 0xffff;
 		*suptr++ = 0xffff;
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index cce2ada07950..7f544ef2f5fc 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -997,12 +997,10 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
 	memset(hash_table, 0, sizeof(hash_table));
 	set_bit_le(255, hash_table); 			/* Broadcast entry */
 	/* This should work on big-endian machines as well. */
-	for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-	     i++, mclist = mclist->next) {
+	netdev_for_each_mc_addr(mclist, dev) {
 		int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
 
 		set_bit_le(index, hash_table);
-
 	}
 	for (i = 0; i < 32; i++) {
 		*setup_frm++ = hash_table[i];
@@ -1021,20 +1019,18 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
 {
 	struct tulip_private *tp = netdev_priv(dev);
 	struct dev_mc_list *mclist;
-	int i;
 	u16 *eaddrs;
 
 	/* We have <= 14 addresses so we can use the wonderful
 	   16 address perfect filtering of the Tulip. */
-	for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
-	     i++, mclist = mclist->next) {
+	netdev_for_each_mc_addr(mclist, dev) {
 		eaddrs = (u16 *)mclist->dmi_addr;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
 		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
 	}
 	/* Fill the unused entries with the broadcast address. */
-	memset(setup_frm, 0xff, (15-i)*12);
+	memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
 	setup_frm = &tp->setup_frame[15*6];
 
 	/* Fill the final entry with our physical address. */
@@ -1066,7 +1062,6 @@ static void set_rx_mode(struct net_device *dev)
 		/* Some work-alikes have only a 64-entry hash filter table. */
 		/* Should verify correctness on big-endian/__powerpc__ */
 		struct dev_mc_list *mclist;
-		int i;
 		if (netdev_mc_count(dev) > 64) {
 			/* Arbitrary non-effective limit. */
 			tp->csr6 |= AcceptAllMulticast;
@@ -1074,9 +1069,7 @@ static void set_rx_mode(struct net_device *dev)
 		} else {
 			u32 mc_filter[2] = {0, 0};		 /* Multicast hash filter */
 			int filterbit;
-			for (i = 0, mclist = dev->mc_list;
-			     mclist && i < netdev_mc_count(dev);
-			     i++, mclist = mclist->next) {
+			netdev_for_each_mc_addr(mclist, dev) {
 				if (tp->flags & COMET_MAC_ADDR)
 					filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
 				else
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 216ceb322ed4..0ab05af237e5 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -1415,14 +1415,14 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
 	*suptr++ = 0xffff << FLT_SHIFT;
 
 	/* fit the multicast address */
-	for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+	netdev_for_each_mc_addr(mcptr, dev) {
 		addrptr = (u16 *) mcptr->dmi_addr;
 		*suptr++ = addrptr[0] << FLT_SHIFT;
 		*suptr++ = addrptr[1] << FLT_SHIFT;
 		*suptr++ = addrptr[2] << FLT_SHIFT;
 	}
 
-	for (; i<14; i++) {
+	for (i = netdev_mc_count(dev); i < 14; i++) {
 		*suptr++ = 0xffff << FLT_SHIFT;
 		*suptr++ = 0xffff << FLT_SHIFT;
 		*suptr++ = 0xffff << FLT_SHIFT;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 98711a9f35ac..304f43866c44 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1368,11 +1368,9 @@ static u32 __set_rx_mode(struct net_device *dev)
 		rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 	} else {
 		struct dev_mc_list *mclist;
-		int i;
+
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int filterbit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
 			filterbit &= 0x3f;
 			mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
-- 
cgit v1.2.3


From a92635dc77b14f0f28d45c0fbf91b5064d9d7617 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 18 Feb 2010 04:02:26 +0000
Subject: net/usb: convert to use netdev_for_each_mc_addr

also removed needless checks in smsc95xx

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/asix.c     | 12 ++++--------
 drivers/net/usb/catc.c     |  5 +----
 drivers/net/usb/mcs7830.c  |  6 ++----
 drivers/net/usb/smsc95xx.c | 26 ++++++++------------------
 4 files changed, 15 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index f605204de3e5..20e34608fa4a 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -555,20 +555,18 @@ static void asix_set_multicast(struct net_device *net)
 		 * for our 8 byte filter buffer
 		 * to avoid allocating memory that
 		 * is tricky to free later */
-		struct dev_mc_list *mc_list = net->mc_list;
+		struct dev_mc_list *mc_list;
 		u32 crc_bits;
-		int i;
 
 		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
 
 		/* Build the multicast hash filter. */
-		for (i = 0; i < netdev_mc_count(net); i++) {
+		netdev_for_each_mc_addr(mc_list, net) {
 			crc_bits =
 			    ether_crc(ETH_ALEN,
 				      mc_list->dmi_addr) >> 26;
 			data->multi_filter[crc_bits >> 3] |=
 			    1 << (crc_bits & 7);
-			mc_list = mc_list->next;
 		}
 
 		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
@@ -769,20 +767,18 @@ static void ax88172_set_multicast(struct net_device *net)
 		 * for our 8 byte filter buffer
 		 * to avoid allocating memory that
 		 * is tricky to free later */
-		struct dev_mc_list *mc_list = net->mc_list;
+		struct dev_mc_list *mc_list;
 		u32 crc_bits;
-		int i;
 
 		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
 
 		/* Build the multicast hash filter. */
-		for (i = 0; i < netdev_mc_count(net); i++) {
+		netdev_for_each_mc_addr(mc_list, net) {
 			crc_bits =
 			    ether_crc(ETH_ALEN,
 				      mc_list->dmi_addr) >> 26;
 			data->multi_filter[crc_bits >> 3] |=
 			    1 << (crc_bits & 7);
-			mc_list = mc_list->next;
 		}
 
 		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 5a13660ebd17..96f1ebe0d348 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -632,7 +632,6 @@ static void catc_set_multicast_list(struct net_device *netdev)
 	struct dev_mc_list *mc;
 	u8 broadcast[6];
 	u8 rx = RxEnable | RxPolarity | RxMultiCast;
-	int i;
 
 	memset(broadcast, 0xff, 6);
 	memset(catc->multicast, 0, 64);
@@ -648,9 +647,7 @@ static void catc_set_multicast_list(struct net_device *netdev)
 	if (netdev->flags & IFF_ALLMULTI) {
 		memset(catc->multicast, 0xff, 64);
 	} else {
-		for (i = 0, mc = netdev->mc_list;
-		     mc && i < netdev_mc_count(netdev);
-		     i++, mc = mc->next) {
+		netdev_for_each_mc_addr(mc, netdev) {
 			u32 crc = ether_crc_le(6, mc->dmi_addr);
 			if (!catc->is_f5u011) {
 				catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 34665137f2c3..70978219e98a 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -452,15 +452,13 @@ static void mcs7830_data_set_multicast(struct net_device *net)
 		 * for our 8 byte filter buffer
 		 * to avoid allocating memory that
 		 * is tricky to free later */
-		struct dev_mc_list *mc_list = net->mc_list;
+		struct dev_mc_list *mc_list;
 		u32 crc_bits;
-		int i;
 
 		/* Build the multicast hash filter. */
-		for (i = 0; i < netdev_mc_count(net); i++) {
+		netdev_for_each_mc_addr(mc_list, net) {
 			crc_bits = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
 			data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
-			mc_list = mc_list->next;
 		}
 	}
 }
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 1ada51eb71f7..df9179a1c93b 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -384,30 +384,20 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
 		pdata->mac_cr |= MAC_CR_MCPAS_;
 		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
 	} else if (!netdev_mc_empty(dev->net)) {
-		struct dev_mc_list *mc_list = dev->net->mc_list;
-		int count = 0;
+		struct dev_mc_list *mc_list;
 
 		pdata->mac_cr |= MAC_CR_HPFILT_;
 		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
 
-		while (mc_list) {
-			count++;
-			if (mc_list->dmi_addrlen == ETH_ALEN) {
-				u32 bitnum = smsc95xx_hash(mc_list->dmi_addr);
-				u32 mask = 0x01 << (bitnum & 0x1F);
-				if (bitnum & 0x20)
-					hash_hi |= mask;
-				else
-					hash_lo |= mask;
-			} else {
-				netdev_warn(dev->net, "dmi_addrlen != 6\n");
-			}
-			mc_list = mc_list->next;
+		netdev_for_each_mc_addr(mc_list, netdev) {
+			u32 bitnum = smsc95xx_hash(mc_list->dmi_addr);
+			u32 mask = 0x01 << (bitnum & 0x1F);
+			if (bitnum & 0x20)
+				hash_hi |= mask;
+			else
+				hash_lo |= mask;
 		}
 
-		if (count != ((u32) netdev_mc_count(dev->net)))
-			netdev_warn(dev->net, "mc_count != dev->mc_count\n");
-
 		netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
 				   hash_hi, hash_lo);
 	} else {
-- 
cgit v1.2.3


From 16cad981863344ef779ab703545bb6f261a0f0ce Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 18 Feb 2010 02:47:07 +0000
Subject: tokenring: convert to use netdev_for_each_mc_addr

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tokenring/3c359.c       | 5 ++---
 drivers/net/tokenring/ibmtr.c       | 4 +---
 drivers/net/tokenring/lanstreamer.c | 4 +---
 drivers/net/tokenring/olympic.c     | 5 ++---
 drivers/net/tokenring/tms380tr.c    | 8 +++-----
 5 files changed, 9 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index eff68e1d107b..0fb930feea45 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -1390,10 +1390,9 @@ static int xl_close(struct net_device *dev)
 static void xl_set_rx_mode(struct net_device *dev) 
 {
 	struct xl_private *xl_priv = netdev_priv(dev);
-	struct dev_mc_list *dmi ; 
+	struct dev_mc_list *dmi;
 	unsigned char dev_mc_address[4] ; 
 	u16 options ; 
-	int i ; 
 
 	if (dev->flags & IFF_PROMISC)
 		options = 0x0004 ; 
@@ -1408,7 +1407,7 @@ static void xl_set_rx_mode(struct net_device *dev)
 
 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ;
 
-        for (i=0,dmi=dev->mc_list;i < netdev_mc_count(dev); i++,dmi = dmi->next) {
+	netdev_for_each_mc_addr(dmi, dev) {
                 dev_mc_address[0] |= dmi->dmi_addr[2] ;
                 dev_mc_address[1] |= dmi->dmi_addr[3] ;
                 dev_mc_address[2] |= dmi->dmi_addr[4] ;
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 1ce8f85a89aa..1a0967246e2f 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -995,13 +995,11 @@ static void tok_set_multicast_list(struct net_device *dev)
 	/*BMS ifconfig tr down or hot unplug a PCMCIA card ??hownowbrowncow*/
 	if (/*BMSHELPdev->start == 0 ||*/ ti->open_status != OPEN) return;
 	address[0] = address[1] = address[2] = address[3] = 0;
-	mclist = dev->mc_list;
-	for (i = 0; i < netdev_mc_count(dev); i++) {
+	netdev_for_each_mc_addr(mclist, dev) {
 		address[0] |= mclist->dmi_addr[2];
 		address[1] |= mclist->dmi_addr[3];
 		address[2] |= mclist->dmi_addr[4];
 		address[3] |= mclist->dmi_addr[5];
-		mclist = mclist->next;
 	}
 	SET_PAGE(ti->srb_page);
 	for (i = 0; i < sizeof(struct srb_set_funct_addr); i++)
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 26d84daf660b..dd028fee9dc2 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -1268,7 +1268,6 @@ static void streamer_set_rx_mode(struct net_device *dev)
 	__u8 options = 0;
 	struct dev_mc_list *dmi;
 	unsigned char dev_mc_address[5];
-	int i;
 
 	writel(streamer_priv->srb, streamer_mmio + LAPA);
 	options = streamer_priv->streamer_copy_all_options;
@@ -1303,8 +1302,7 @@ static void streamer_set_rx_mode(struct net_device *dev)
 	writel(streamer_priv->srb,streamer_mmio+LAPA);
 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; 
   
-	for (i=0,dmi=dev->mc_list;i < netdev_mc_count(dev); i++,dmi = dmi->next)
-	{ 
+	netdev_for_each_mc_addr(dmi, dev) {
    	        dev_mc_address[0] |= dmi->dmi_addr[2] ; 
 		dev_mc_address[1] |= dmi->dmi_addr[3] ; 
 		dev_mc_address[2] |= dmi->dmi_addr[4] ; 
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index a242d125b34c..3a25e0434ae2 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -1139,9 +1139,8 @@ static void olympic_set_rx_mode(struct net_device *dev)
    	u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; 
 	u8 options = 0; 
 	u8 __iomem *srb;
-	struct dev_mc_list *dmi ; 
+	struct dev_mc_list *dmi;
 	unsigned char dev_mc_address[4] ; 
-	int i ; 
 
 	writel(olympic_priv->srb,olympic_mmio+LAPA);
 	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
@@ -1178,7 +1177,7 @@ static void olympic_set_rx_mode(struct net_device *dev)
 
 	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; 
 
-	for (i=0,dmi=dev->mc_list;i < netdev_mc_count(dev); i++,dmi = dmi->next) {
+	netdev_for_each_mc_addr(dmi, dev) {
 		dev_mc_address[0] |= dmi->dmi_addr[2] ; 
 		dev_mc_address[1] |= dmi->dmi_addr[3] ; 
 		dev_mc_address[2] |= dmi->dmi_addr[4] ; 
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 6b8868959b85..21a01753312a 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -1212,10 +1212,9 @@ static void tms380tr_set_multicast_list(struct net_device *dev)
 		}
 		else
 		{
-			int i;
-			struct dev_mc_list *mclist = dev->mc_list;
-			for (i=0; i< netdev_mc_count(dev); i++)
-			{
+			struct dev_mc_list *mclist;
+
+			netdev_for_each_mc_addr(mclist, dev) {
 				((char *)(&tp->ocpl.FunctAddr))[0] |=
 					mclist->dmi_addr[2];
 				((char *)(&tp->ocpl.FunctAddr))[1] |=
@@ -1224,7 +1223,6 @@ static void tms380tr_set_multicast_list(struct net_device *dev)
 					mclist->dmi_addr[4];
 				((char *)(&tp->ocpl.FunctAddr))[3] |=
 					mclist->dmi_addr[5];
-				mclist = mclist->next;
 			}
 		}
 		tms380tr_exec_cmd(dev, OC_SET_FUNCT_ADDR);
-- 
cgit v1.2.3


From b03388d6389e8853ddd9ae19d2ba15a6dbbe5d21 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Thu, 18 Feb 2010 00:37:17 +0000
Subject: be2net: free tx buffers when completions never arrive

be2net: free tx buffers when completions never arrive

In cases like when a pci device is disconnected on an error,
pending tx completions will never arrive. Unmap and free such
buffers in the tx cleanup path.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 68e7848ac0b0..545c8417fc26 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1128,6 +1128,9 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 	struct be_queue_info *txq = &adapter->tx_obj.q;
 	struct be_eth_tx_compl *txcp;
 	u16 end_idx, cmpl = 0, timeo = 0;
+	struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+	struct sk_buff *sent_skb;
+	bool dummy_wrb;
 
 	/* Wait for a max of 200ms for all the tx-completions to arrive. */
 	do {
@@ -1151,6 +1154,15 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 	if (atomic_read(&txq->used))
 		dev_err(&adapter->pdev->dev, "%d pending tx-completions\n",
 			atomic_read(&txq->used));
+
+	/* free posted tx for which compls will never arrive */
+	while (atomic_read(&txq->used)) {
+		sent_skb = sent_skbs[txq->tail];
+		end_idx = txq->tail;
+		index_adv(&end_idx,
+			wrb_cnt_for_skb(sent_skb, &dummy_wrb) - 1, txq->len);
+		be_tx_compl_process(adapter, end_idx);
+	}
 }
 
 static void be_mcc_queues_destroy(struct be_adapter *adapter)
-- 
cgit v1.2.3


From 05dbe005386e7521153dce6c5ad95c98b73b80c7 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 19:44:19 +0000
Subject: drivers/net/tg3.c: Use (pr|netdev)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Remove periods from most formats
Coalesce long formats
Use printk_once

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 270 ++++++++++++++++++++++--------------------------------
 1 file changed, 109 insertions(+), 161 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ddf66155f5e2..f204f73c4f99 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -67,7 +67,6 @@
 #include "tg3.h"
 
 #define DRV_MODULE_NAME		"tg3"
-#define PFX DRV_MODULE_NAME	": "
 #define DRV_MODULE_VERSION	"3.108"
 #define DRV_MODULE_RELDATE	"February 17, 2010"
 
@@ -158,7 +157,7 @@
 #define FIRMWARE_TG3TSO5	"tigon/tg3_tso5.bin"
 
 static char version[] __devinitdata =
-	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")";
 
 MODULE_AUTHOR("David S. Miller (davem@redhat.com) and Jeff Garzik (jgarzik@pobox.com)");
 MODULE_DESCRIPTION("Broadcom Tigon3 ethernet driver");
@@ -1099,8 +1098,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 
 	i = mdiobus_register(tp->mdio_bus);
 	if (i) {
-		printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
-			tp->dev->name, i);
+		netdev_warn(tp->dev, "mdiobus_reg failed (0x%x)\n", i);
 		mdiobus_free(tp->mdio_bus);
 		return i;
 	}
@@ -1108,7 +1106,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	if (!phydev || !phydev->drv) {
-		printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
+		netdev_warn(tp->dev, "No PHY devices\n");
 		mdiobus_unregister(tp->mdio_bus);
 		mdiobus_free(tp->mdio_bus);
 		return -ENODEV;
@@ -1252,27 +1250,22 @@ static void tg3_ump_link_report(struct tg3 *tp)
 static void tg3_link_report(struct tg3 *tp)
 {
 	if (!netif_carrier_ok(tp->dev)) {
-		if (netif_msg_link(tp))
-			printk(KERN_INFO PFX "%s: Link is down.\n",
-			       tp->dev->name);
+		netif_info(tp, link, tp->dev, "Link is down\n");
 		tg3_ump_link_report(tp);
 	} else if (netif_msg_link(tp)) {
-		printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
-		       tp->dev->name,
-		       (tp->link_config.active_speed == SPEED_1000 ?
-			1000 :
-			(tp->link_config.active_speed == SPEED_100 ?
-			 100 : 10)),
-		       (tp->link_config.active_duplex == DUPLEX_FULL ?
-			"full" : "half"));
-
-		printk(KERN_INFO PFX
-		       "%s: Flow control is %s for TX and %s for RX.\n",
-		       tp->dev->name,
-		       (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
-		       "on" : "off",
-		       (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
-		       "on" : "off");
+		netdev_info(tp->dev, "Link is up at %d Mbps, %s duplex\n",
+			    (tp->link_config.active_speed == SPEED_1000 ?
+			     1000 :
+			     (tp->link_config.active_speed == SPEED_100 ?
+			      100 : 10)),
+			    (tp->link_config.active_duplex == DUPLEX_FULL ?
+			     "full" : "half"));
+
+		netdev_info(tp->dev, "Flow control is %s for TX and %s for RX\n",
+			    (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
+			    "on" : "off",
+			    (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
+			    "on" : "off");
 		tg3_ump_link_report(tp);
 	}
 }
@@ -1471,7 +1464,7 @@ static int tg3_phy_init(struct tg3 *tp)
 	phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
 			     phydev->dev_flags, phydev->interface);
 	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
+		netdev_err(tp->dev, "Could not attach to PHY\n");
 		return PTR_ERR(phydev);
 	}
 
@@ -2500,8 +2493,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		break;
 
 	default:
-		printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
-			tp->dev->name, state);
+		netdev_err(tp->dev, "Invalid power state (D%d) requested\n",
+			   state);
 		return -EINVAL;
 	}
 
@@ -4342,10 +4335,8 @@ static void tg3_tx_recover(struct tg3 *tp)
 	BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
 	       tp->write32_tx_mbox == tg3_write_indirect_mbox);
 
-	printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
-	       "mapped I/O cycles to the network device, attempting to "
-	       "recover. Please report the problem to the driver maintainer "
-	       "and include system chipset information.\n", tp->dev->name);
+	netdev_warn(tp->dev, "The system may be re-ordering memory-mapped I/O cycles to the network device, attempting to recover\n"
+		    "Please report the problem to the driver maintainer and include system chipset information.\n");
 
 	spin_lock(&tp->lock);
 	tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
@@ -5269,8 +5260,7 @@ static int tg3_restart_hw(struct tg3 *tp, int reset_phy)
 
 	err = tg3_init_hw(tp, reset_phy);
 	if (err) {
-		printk(KERN_ERR PFX "%s: Failed to re-initialize device, "
-		       "aborting.\n", tp->dev->name);
+		netdev_err(tp->dev, "Failed to re-initialize device, aborting\n");
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_full_unlock(tp);
 		del_timer_sync(&tp->timer);
@@ -5343,10 +5333,10 @@ out:
 
 static void tg3_dump_short_state(struct tg3 *tp)
 {
-	printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
-	       tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
-	printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
-	       tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
+	netdev_err(tp->dev, "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
+		   tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
+	netdev_err(tp->dev, "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
+		   tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
 }
 
 static void tg3_tx_timeout(struct net_device *dev)
@@ -5354,8 +5344,7 @@ static void tg3_tx_timeout(struct net_device *dev)
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (netif_msg_tx_err(tp)) {
-		printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
-		       dev->name);
+		netdev_err(dev, "transmit timed out, resetting\n");
 		tg3_dump_short_state(tp);
 	}
 
@@ -5519,8 +5508,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
 			netif_tx_stop_queue(txq);
 
 			/* This is a hard error, log it. */
-			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
-			       "queue awake!\n", dev->name);
+			netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
 		}
 		return NETDEV_TX_BUSY;
 	}
@@ -5723,8 +5711,7 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 			netif_tx_stop_queue(txq);
 
 			/* This is a hard error, log it. */
-			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
-			       "queue awake!\n", dev->name);
+			netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
 		}
 		return NETDEV_TX_BUSY;
 	}
@@ -6071,11 +6058,8 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
 	/* Now allocate fresh SKBs for each rx ring. */
 	for (i = 0; i < tp->rx_pending; i++) {
 		if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_STD, i) < 0) {
-			printk(KERN_WARNING PFX
-			       "%s: Using a smaller RX standard ring, "
-			       "only %d out of %d buffers were allocated "
-			       "successfully.\n",
-			       tp->dev->name, i, tp->rx_pending);
+			netdev_warn(tp->dev, "Using a smaller RX standard ring, only %d out of %d buffers were allocated successfully\n",
+				    i, tp->rx_pending);
 			if (i == 0)
 				goto initfail;
 			tp->rx_pending = i;
@@ -6104,11 +6088,8 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
 
 	for (i = 0; i < tp->rx_jumbo_pending; i++) {
 		if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO, i) < 0) {
-			printk(KERN_WARNING PFX
-			       "%s: Using a smaller RX jumbo ring, "
-			       "only %d out of %d buffers were "
-			       "allocated successfully.\n",
-			       tp->dev->name, i, tp->rx_jumbo_pending);
+			netdev_warn(tp->dev, "Using a smaller RX jumbo ring, only %d out of %d buffers were allocated successfully\n",
+				    i, tp->rx_jumbo_pending);
 			if (i == 0)
 				goto initfail;
 			tp->rx_jumbo_pending = i;
@@ -6452,8 +6433,7 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
 	}
 
 	if (i == MAX_WAIT_CNT && !silent) {
-		printk(KERN_ERR PFX "tg3_stop_block timed out, "
-		       "ofs=%lx enable_bit=%x\n",
+		pr_err("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
 		       ofs, enable_bit);
 		return -ENODEV;
 	}
@@ -6500,9 +6480,8 @@ static int tg3_abort_hw(struct tg3 *tp, int silent)
 			break;
 	}
 	if (i >= MAX_WAIT_CNT) {
-		printk(KERN_ERR PFX "tg3_abort_hw timed out for %s, "
-		       "TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
-		       tp->dev->name, tr32(MAC_TX_MODE));
+		netdev_err(tp->dev, "%s timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
+			   __func__, tr32(MAC_TX_MODE));
 		err |= -ENODEV;
 	}
 
@@ -6723,8 +6702,7 @@ static int tg3_poll_fw(struct tg3 *tp)
 	    !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
 		tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
 
-		printk(KERN_INFO PFX "%s: No firmware running.\n",
-		       tp->dev->name);
+		netdev_info(tp->dev, "No firmware running\n");
 	}
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
@@ -7152,10 +7130,8 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
 	}
 
 	if (i >= 10000) {
-		printk(KERN_ERR PFX "tg3_reset_cpu timed out for %s, "
-		       "and %s CPU\n",
-		       tp->dev->name,
-		       (offset == RX_CPU_BASE ? "RX" : "TX"));
+		netdev_err(tp->dev, "%s timed out, %s CPU\n",
+			   __func__, offset == RX_CPU_BASE ? "RX" : "TX");
 		return -ENODEV;
 	}
 
@@ -7180,9 +7156,8 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
 
 	if (cpu_base == TX_CPU_BASE &&
 	    (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
-		printk(KERN_ERR PFX "tg3_load_firmware_cpu: Trying to load "
-		       "TX cpu firmware on %s which is 5705.\n",
-		       tp->dev->name);
+		netdev_err(tp->dev, "%s: Trying to load TX cpu firmware which is 5705\n",
+			   __func__);
 		return -EINVAL;
 	}
 
@@ -7261,10 +7236,8 @@ static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
 		udelay(1000);
 	}
 	if (i >= 5) {
-		printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
-		       "to set RX CPU PC, is %08x should be %08x\n",
-		       tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
-		       info.fw_base);
+		netdev_err(tp->dev, "tg3_load_firmware fails to set RX CPU PC, is %08x should be %08x\n",
+			   tr32(RX_CPU_BASE + CPU_PC), info.fw_base);
 		return -ENODEV;
 	}
 	tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
@@ -7327,10 +7300,8 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
 		udelay(1000);
 	}
 	if (i >= 5) {
-		printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
-		       "to set CPU PC, is %08x should be %08x\n",
-		       tp->dev->name, tr32(cpu_base + CPU_PC),
-		       info.fw_base);
+		netdev_err(tp->dev, "%s fails to set CPU PC, is %08x should be %08x\n",
+			   __func__, tr32(cpu_base + CPU_PC), info.fw_base);
 		return -ENODEV;
 	}
 	tw32(cpu_base + CPU_STATE, 0xffffffff);
@@ -7791,8 +7762,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		udelay(10);
 	}
 	if (i >= 2000) {
-		printk(KERN_ERR PFX "tg3_reset_hw cannot enable BUFMGR for %s.\n",
-		       tp->dev->name);
+		netdev_err(tp->dev, "%s cannot enable BUFMGR\n", __func__);
 		return -ENODEV;
 	}
 
@@ -8655,10 +8625,8 @@ static int tg3_test_msi(struct tg3 *tp)
 		return err;
 
 	/* MSI test failed, go back to INTx mode */
-	printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
-	       "switching to INTx mode. Please report this failure to "
-	       "the PCI maintainer and include system chipset information.\n",
-		       tp->dev->name);
+	netdev_warn(tp->dev, "No interrupt was generated using MSI, switching to INTx mode\n"
+		    "Please report this failure to the PCI maintainer and include system chipset information\n");
 
 	free_irq(tp->napi[0].irq_vec, &tp->napi[0]);
 
@@ -8691,8 +8659,8 @@ static int tg3_request_firmware(struct tg3 *tp)
 	const __be32 *fw_data;
 
 	if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
-		printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
-		       tp->dev->name, tp->fw_needed);
+		netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+			   tp->fw_needed);
 		return -ENOENT;
 	}
 
@@ -8705,8 +8673,8 @@ static int tg3_request_firmware(struct tg3 *tp)
 
 	tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
 	if (tp->fw_len < (tp->fw->size - 12)) {
-		printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
-		       tp->dev->name, tp->fw_len, tp->fw_needed);
+		netdev_err(tp->dev, "bogus length %d in \"%s\"\n",
+			   tp->fw_len, tp->fw_needed);
 		release_firmware(tp->fw);
 		tp->fw = NULL;
 		return -EINVAL;
@@ -8744,9 +8712,8 @@ static bool tg3_enable_msix(struct tg3 *tp)
 			return false;
 		if (pci_enable_msix(tp->pdev, msix_ent, rc))
 			return false;
-		printk(KERN_NOTICE
-		       "%s: Requested %d MSI-X vectors, received %d\n",
-		       tp->dev->name, tp->irq_cnt, rc);
+		netdev_notice(tp->dev, "Requested %d MSI-X vectors, received %d\n",
+			      tp->irq_cnt, rc);
 		tp->irq_cnt = rc;
 	}
 
@@ -8771,8 +8738,7 @@ static void tg3_ints_init(struct tg3 *tp)
 		/* All MSI supporting chips should support tagged
 		 * status.  Assert that this is the case.
 		 */
-		printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
-		       "Not using MSI.\n", tp->dev->name);
+		netdev_warn(tp->dev, "MSI without TAGGED? Not using MSI\n");
 		goto defcfg;
 	}
 
@@ -8817,12 +8783,10 @@ static int tg3_open(struct net_device *dev)
 			if (err)
 				return err;
 		} else if (err) {
-			printk(KERN_WARNING "%s: TSO capability disabled.\n",
-			       tp->dev->name);
+			netdev_warn(tp->dev, "TSO capability disabled\n");
 			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
 		} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
-			printk(KERN_NOTICE "%s: TSO capability restored.\n",
-			       tp->dev->name);
+			netdev_notice(tp->dev, "TSO capability restored\n");
 			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
 		}
 	}
@@ -10687,8 +10651,7 @@ static int tg3_test_registers(struct tg3 *tp)
 
 out:
 	if (netif_msg_hw(tp))
-		printk(KERN_ERR PFX "Register test failed at offset %x\n",
-		       offset);
+		pr_err("Register test failed at offset %x\n", offset);
 	tw32(offset, save_val);
 	return -EIO;
 }
@@ -11815,8 +11778,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
 		tp->tg3_flags |= TG3_FLAG_NVRAM;
 
 		if (tg3_nvram_lock(tp)) {
-			printk(KERN_WARNING PFX "%s: Cannot get nvarm lock, "
-			       "tg3_nvram_init failed.\n", tp->dev->name);
+			netdev_warn(tp->dev, "Cannot get nvram lock, %s failed\n",
+				    __func__);
 			return;
 		}
 		tg3_enable_nvram_access(tp);
@@ -13280,8 +13243,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		   (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
 		tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
 		if (!tp->pcix_cap) {
-			printk(KERN_ERR PFX "Cannot find PCI-X "
-					    "capability, aborting.\n");
+			pr_err("Cannot find PCI-X capability, aborting\n");
 			return -EIO;
 		}
 
@@ -13478,8 +13440,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	/* Force the chip into D0. */
 	err = tg3_set_power_state(tp, PCI_D0);
 	if (err) {
-		printk(KERN_ERR PFX "(%s) transition to D0 failed\n",
-		       pci_name(tp->pdev));
+		pr_err("(%s) transition to D0 failed\n", pci_name(tp->pdev));
 		return err;
 	}
 
@@ -13653,7 +13614,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 	err = tg3_phy_probe(tp);
 	if (err) {
-		printk(KERN_ERR PFX "(%s) phy probe failed, err %d\n",
+		pr_err("(%s) phy probe failed, err %d\n",
 		       pci_name(tp->pdev), err);
 		/* ... but do not return immediately ... */
 		tg3_mdio_fini(tp);
@@ -14163,7 +14124,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 		/* Send the buffer to the chip. */
 		ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 1);
 		if (ret) {
-			printk(KERN_ERR "tg3_test_dma() Write the buffer failed %d\n", ret);
+			pr_err("tg3_test_dma() Write the buffer failed %d\n",
+			       ret);
 			break;
 		}
 
@@ -14173,7 +14135,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 			u32 val;
 			tg3_read_mem(tp, 0x2100 + (i*4), &val);
 			if (le32_to_cpu(val) != p[i]) {
-				printk(KERN_ERR "  tg3_test_dma()  Card buffer corrupted on write! (%d != %d)\n", val, i);
+				pr_err("  tg3_test_dma()  Card buffer corrupted on write! (%d != %d)\n",
+				       val, i);
 				/* ret = -ENODEV here? */
 			}
 			p[i] = 0;
@@ -14182,7 +14145,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 		/* Now read it back. */
 		ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0);
 		if (ret) {
-			printk(KERN_ERR "tg3_test_dma() Read the buffer failed %d\n", ret);
+			pr_err("tg3_test_dma() Read the buffer failed %d\n",
+			       ret);
 
 			break;
 		}
@@ -14199,7 +14163,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 				tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
 				break;
 			} else {
-				printk(KERN_ERR "tg3_test_dma() buffer corrupted on read back! (%d != %d)\n", p[i], i);
+				pr_err("tg3_test_dma() buffer corrupted on read back! (%d != %d)\n",
+				       p[i], i);
 				ret = -ENODEV;
 				goto out;
 			}
@@ -14480,7 +14445,6 @@ static const struct net_device_ops tg3_netdev_ops_dma_bug = {
 static int __devinit tg3_init_one(struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
-	static int tg3_version_printed = 0;
 	struct net_device *dev;
 	struct tg3 *tp;
 	int i, err, pm_cap;
@@ -14488,20 +14452,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	char str[40];
 	u64 dma_mask, persist_dma_mask;
 
-	if (tg3_version_printed++ == 0)
-		printk(KERN_INFO "%s", version);
+	printk_once(KERN_INFO "%s\n", version);
 
 	err = pci_enable_device(pdev);
 	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device, "
-		       "aborting.\n");
+		pr_err("Cannot enable PCI device, aborting\n");
 		return err;
 	}
 
 	err = pci_request_regions(pdev, DRV_MODULE_NAME);
 	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources, "
-		       "aborting.\n");
+		pr_err("Cannot obtain PCI resources, aborting\n");
 		goto err_out_disable_pdev;
 	}
 
@@ -14510,15 +14471,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	/* Find power-management capability. */
 	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (pm_cap == 0) {
-		printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
-		       "aborting.\n");
+		pr_err("Cannot find PowerManagement capability, aborting\n");
 		err = -EIO;
 		goto err_out_free_res;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS);
 	if (!dev) {
-		printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
+		pr_err("Etherdev alloc failed, aborting\n");
 		err = -ENOMEM;
 		goto err_out_free_res;
 	}
@@ -14568,8 +14528,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	tp->regs = pci_ioremap_bar(pdev, BAR_0);
 	if (!tp->regs) {
-		printk(KERN_ERR PFX "Cannot map device registers, "
-		       "aborting.\n");
+		netdev_err(dev, "Cannot map device registers, aborting\n");
 		err = -ENOMEM;
 		goto err_out_free_dev;
 	}
@@ -14585,8 +14544,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	err = tg3_get_invariants(tp);
 	if (err) {
-		printk(KERN_ERR PFX "Problem fetching invariants of chip, "
-		       "aborting.\n");
+		netdev_err(dev, "Problem fetching invariants of chip, aborting\n");
 		goto err_out_iounmap;
 	}
 
@@ -14621,8 +14579,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 			err = pci_set_consistent_dma_mask(pdev,
 							  persist_dma_mask);
 			if (err < 0) {
-				printk(KERN_ERR PFX "Unable to obtain 64 bit "
-				       "DMA for consistent allocations\n");
+				netdev_err(dev, "Unable to obtain 64 bit DMA for consistent allocations\n");
 				goto err_out_iounmap;
 			}
 		}
@@ -14630,8 +14587,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	if (err || dma_mask == DMA_BIT_MASK(32)) {
 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
-			printk(KERN_ERR PFX "No usable DMA configuration, "
-			       "aborting.\n");
+			netdev_err(dev, "No usable DMA configuration, aborting\n");
 			goto err_out_iounmap;
 		}
 	}
@@ -14680,16 +14636,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	err = tg3_get_device_address(tp);
 	if (err) {
-		printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
-		       "aborting.\n");
+		netdev_err(dev, "Could not obtain valid ethernet address, aborting\n");
 		goto err_out_iounmap;
 	}
 
 	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
 		tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
 		if (!tp->aperegs) {
-			printk(KERN_ERR PFX "Cannot map APE registers, "
-			       "aborting.\n");
+			netdev_err(dev, "Cannot map APE registers, aborting\n");
 			err = -ENOMEM;
 			goto err_out_iounmap;
 		}
@@ -14713,7 +14667,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	err = tg3_test_dma(tp);
 	if (err) {
-		printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
+		netdev_err(dev, "DMA engine test failed, aborting\n");
 		goto err_out_apeunmap;
 	}
 
@@ -14774,45 +14728,39 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	err = register_netdev(dev);
 	if (err) {
-		printk(KERN_ERR PFX "Cannot register net device, "
-		       "aborting.\n");
+		netdev_err(dev, "Cannot register net device, aborting\n");
 		goto err_out_apeunmap;
 	}
 
-	printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
-	       dev->name,
-	       tp->board_part_number,
-	       tp->pci_chip_rev_id,
-	       tg3_bus_string(tp, str),
-	       dev->dev_addr);
+	netdev_info(dev, "Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
+		    tp->board_part_number,
+		    tp->pci_chip_rev_id,
+		    tg3_bus_string(tp, str),
+		    dev->dev_addr);
 
 	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
 		struct phy_device *phydev;
 		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
-		printk(KERN_INFO
-		       "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-		       tp->dev->name, phydev->drv->name,
-		       dev_name(&phydev->dev));
+		netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+			    phydev->drv->name, dev_name(&phydev->dev));
 	} else
-		printk(KERN_INFO
-		       "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
-		       tp->dev->name, tg3_phy_string(tp),
-		       ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
-			((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
-			 "10/100/1000Base-T")),
-		       (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
-
-	printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
-	       dev->name,
-	       (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
-	       (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
-	       (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
-	       (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
-	       (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
-	printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
-	       dev->name, tp->dma_rwctrl,
-	       (pdev->dma_mask == DMA_BIT_MASK(32)) ? 32 :
-	        (((u64) pdev->dma_mask == DMA_BIT_MASK(40)) ? 40 : 64));
+		netdev_info(dev, "attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
+			    tg3_phy_string(tp),
+			    ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
+			     ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
+			      "10/100/1000Base-T")),
+			    (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
+
+	netdev_info(dev, "RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
+		    (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
+		    (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
+		    (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
+		    (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
+		    (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+	netdev_info(dev, "dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+		    tp->dma_rwctrl,
+		    pdev->dma_mask == DMA_BIT_MASK(32) ? 32 :
+		    ((u64)pdev->dma_mask) == DMA_BIT_MASK(40) ? 40 : 64);
 
 	return 0;
 
-- 
cgit v1.2.3


From ad06ab2a1c74a9e0f1136f8260e411bf01c4502f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 17 Feb 2010 20:00:17 +0000
Subject: drivers/net/sis190.c: Use (pr|netdev|netif)_<level> macro helpers

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level> and netif_msg_<test>
Remove local #define net_<test> macros
Remove periods from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sis190.c | 152 +++++++++++++++++++++++++--------------------------
 1 file changed, 75 insertions(+), 77 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index ead1d31308f8..4487b065ef72 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -17,7 +17,9 @@
 
    See the file COPYING in this distribution for more information.
 
- */
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -32,17 +34,6 @@
 #include <linux/dma-mapping.h>
 #include <asm/irq.h>
 
-#define net_drv(p, arg...)	if (netif_msg_drv(p)) \
-					printk(arg)
-#define net_probe(p, arg...)	if (netif_msg_probe(p)) \
-					printk(arg)
-#define net_link(p, arg...)	if (netif_msg_link(p)) \
-					printk(arg)
-#define net_intr(p, arg...)	if (netif_msg_intr(p)) \
-					printk(arg)
-#define net_tx_err(p, arg...)	if (netif_msg_tx_err(p)) \
-					printk(arg)
-
 #define PHY_MAX_ADDR		32
 #define PHY_ID_ANY		0x1f
 #define MII_REG_ANY		0x1f
@@ -50,7 +41,6 @@
 #define DRV_VERSION		"1.4"
 #define DRV_NAME		"sis190"
 #define SIS190_DRIVER_NAME	DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
-#define PFX DRV_NAME ": "
 
 #define sis190_rx_skb			netif_rx
 #define sis190_rx_quota(count, quota)	count
@@ -382,7 +372,7 @@ static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
 	}
 
 	if (i > 99)
-		printk(KERN_ERR PFX "PHY command failed !\n");
+		pr_err("PHY command failed !\n");
 }
 
 static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
@@ -590,8 +580,7 @@ static int sis190_rx_interrupt(struct net_device *dev,
 
 		status = le32_to_cpu(desc->PSize);
 
-		// net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name,
-		//	 status);
+		//netif_info(tp, intr, dev, "Rx PSize = %08x\n", status);
 
 		if (sis190_rx_pkt_err(status, stats) < 0)
 			sis190_give_to_asic(desc, tp->rx_buf_sz);
@@ -602,9 +591,8 @@ static int sis190_rx_interrupt(struct net_device *dev,
 			struct pci_dev *pdev = tp->pci_dev;
 
 			if (unlikely(pkt_size > tp->rx_buf_sz)) {
-				net_intr(tp, KERN_INFO
-					 "%s: (frag) status = %08x.\n",
-					 dev->name, status);
+				netif_info(tp, intr, dev,
+					   "(frag) status = %08x\n", status);
 				stats->rx_dropped++;
 				stats->rx_length_errors++;
 				sis190_give_to_asic(desc, tp->rx_buf_sz);
@@ -638,12 +626,12 @@ static int sis190_rx_interrupt(struct net_device *dev,
 	tp->cur_rx = cur_rx;
 
 	delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
-	if (!delta && count && netif_msg_intr(tp))
-		printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name);
+	if (!delta && count)
+		netif_info(tp, intr, dev, "no Rx buffer allocated\n");
 	tp->dirty_rx += delta;
 
-	if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp))
-		printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name);
+	if ((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx)
+		netif_emerg(tp, intr, dev, "Rx buffers exhausted\n");
 
 	return count;
 }
@@ -752,10 +740,10 @@ static irqreturn_t sis190_interrupt(int irq, void *__dev)
 
 	SIS_W32(IntrStatus, status);
 
-	// net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status);
+//	netif_info(tp, intr, dev, "status = %08x\n", status);
 
 	if (status & LinkChange) {
-		net_intr(tp, KERN_INFO "%s: link change.\n", dev->name);
+		netif_info(tp, intr, dev, "link change\n");
 		schedule_work(&tp->phy_task);
 	}
 
@@ -931,8 +919,7 @@ static void sis190_phy_task(struct work_struct *work)
 	} else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
 		     BMSR_ANEGCOMPLETE)) {
 		netif_carrier_off(dev);
-		net_link(tp, KERN_WARNING "%s: auto-negotiating...\n",
-			 dev->name);
+		netif_warn(tp, link, dev, "auto-negotiating...\n");
 		mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
 	} else {
 		/* Rejoice ! */
@@ -958,13 +945,13 @@ static void sis190_phy_task(struct work_struct *work)
 		u16 adv, autoexp, gigadv, gigrec;
 
 		val = mdio_read(ioaddr, phy_id, 0x1f);
-		net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
+		netif_info(tp, link, dev, "mii ext = %04x\n", val);
 
 		val = mdio_read(ioaddr, phy_id, MII_LPA);
 		adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
 		autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION);
-		net_link(tp, KERN_INFO "%s: mii lpa=%04x adv=%04x exp=%04x.\n",
-			 dev->name, val, adv, autoexp);
+		netif_info(tp, link, dev, "mii lpa=%04x adv=%04x exp=%04x\n",
+			   val, adv, autoexp);
 
 		if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) {
 			/* check for gigabit speed */
@@ -1005,8 +992,7 @@ static void sis190_phy_task(struct work_struct *work)
 
 		tp->negotiated_lpa = p->val;
 
-		net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
-			 p->msg);
+		netif_info(tp, link, dev, "link on %s mode\n", p->msg);
 		netif_carrier_on(dev);
 	}
 
@@ -1192,9 +1178,8 @@ static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
 
 	if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
 		netif_stop_queue(dev);
-		net_tx_err(tp, KERN_ERR PFX
-			   "%s: BUG! Tx Ring full when queue awake!\n",
-			   dev->name);
+		netif_err(tp, tx_err, dev,
+			  "BUG! Tx Ring full when queue awake!\n");
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1294,9 +1279,9 @@ static u16 sis190_default_phy(struct net_device *dev)
 
 	if (mii_if->phy_id != phy_default->phy_id) {
 		mii_if->phy_id = phy_default->phy_id;
-		net_probe(tp, KERN_INFO
-		       "%s: Using transceiver at address %d as default.\n",
-		       pci_name(tp->pci_dev), mii_if->phy_id);
+		if (netif_msg_probe(tp))
+			pr_info("%s: Using transceiver at address %d as default\n",
+				pci_name(tp->pci_dev), mii_if->phy_id);
 	}
 
 	status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
@@ -1334,14 +1319,15 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
 			((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
 				LAN : HOME) : p->type;
 		tp->features |= p->feature;
-		net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
-			pci_name(tp->pci_dev), p->name, phy_id);
+		if (netif_msg_probe(tp))
+			pr_info("%s: %s transceiver at address %d\n",
+				pci_name(tp->pci_dev), p->name, phy_id);
 	} else {
 		phy->type = UNKNOWN;
-		net_probe(tp, KERN_INFO
-			"%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
-			pci_name(tp->pci_dev),
-			phy->id[0], (phy->id[1] & 0xfff0), phy_id);
+		if (netif_msg_probe(tp))
+			pr_info("%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
+				pci_name(tp->pci_dev),
+				phy->id[0], (phy->id[1] & 0xfff0), phy_id);
 	}
 }
 
@@ -1405,8 +1391,9 @@ static int __devinit sis190_mii_probe(struct net_device *dev)
 	}
 
 	if (list_empty(&tp->first_phy)) {
-		net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
-			  pci_name(tp->pci_dev));
+		if (netif_msg_probe(tp))
+			pr_info("%s: No MII transceivers found!\n",
+				pci_name(tp->pci_dev));
 		rc = -EIO;
 		goto out;
 	}
@@ -1452,7 +1439,8 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
 
 	dev = alloc_etherdev(sizeof(*tp));
 	if (!dev) {
-		net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n");
+		if (netif_msg_drv(&debug))
+			pr_err("unable to alloc new ethernet\n");
 		rc = -ENOMEM;
 		goto err_out_0;
 	}
@@ -1465,34 +1453,39 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
 
 	rc = pci_enable_device(pdev);
 	if (rc < 0) {
-		net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_err("%s: enable failure\n", pci_name(pdev));
 		goto err_free_dev_1;
 	}
 
 	rc = -ENODEV;
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n",
-			  pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_err("%s: region #0 is no MMIO resource\n",
+			       pci_name(pdev));
 		goto err_pci_disable_2;
 	}
 	if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
-		net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n",
-			  pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_err("%s: invalid PCI region size(s)\n",
+			       pci_name(pdev));
 		goto err_pci_disable_2;
 	}
 
 	rc = pci_request_regions(pdev, DRV_NAME);
 	if (rc < 0) {
-		net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n",
-			  pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_err("%s: could not request regions\n",
+			       pci_name(pdev));
 		goto err_pci_disable_2;
 	}
 
 	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (rc < 0) {
-		net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n",
-			  pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_err("%s: DMA configuration failed\n",
+			       pci_name(pdev));
 		goto err_free_res_3;
 	}
 
@@ -1500,8 +1493,9 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
 
 	ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
 	if (!ioaddr) {
-		net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n",
-			  pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_err("%s: cannot remap MMIO, aborting\n",
+			       pci_name(pdev));
 		rc = -EIO;
 		goto err_free_res_3;
 	}
@@ -1537,9 +1531,8 @@ static void sis190_tx_timeout(struct net_device *dev)
 	if (tmp8 & CmdTxEnb)
 		SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
 
-
-	net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n",
-		   dev->name, SIS_R32(TxControl), SIS_R32(TxSts));
+	netif_info(tp, tx_err, dev, "Transmit timeout, status %08x %08x\n",
+		   SIS_R32(TxControl), SIS_R32(TxSts));
 
 	/* Disable interrupts by clearing the interrupt mask. */
 	SIS_W32(IntrMask, 0x0000);
@@ -1568,15 +1561,16 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
 	u16 sig;
 	int i;
 
-	net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
-		  pci_name(pdev));
+	if (netif_msg_probe(tp))
+		pr_info("%s: Read MAC address from EEPROM\n", pci_name(pdev));
 
 	/* Check to see if there is a sane EEPROM */
 	sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
 
 	if ((sig == 0xffff) || (sig == 0x0000)) {
-		net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
-			  pci_name(pdev), sig);
+		if (netif_msg_probe(tp))
+			pr_info("%s: Error EEPROM read %x\n",
+				pci_name(pdev), sig);
 		return -EIO;
 	}
 
@@ -1610,8 +1604,8 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
 	u8 reg, tmp8;
 	unsigned int i;
 
-	net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
-		  pci_name(pdev));
+	if (netif_msg_probe(tp))
+		pr_info("%s: Read MAC address from APC\n", pci_name(pdev));
 
 	for (i = 0; i < ARRAY_SIZE(ids); i++) {
 		isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL);
@@ -1620,8 +1614,9 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
 	}
 
 	if (!isa_bridge) {
-		net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
-			  pci_name(pdev));
+		if (netif_msg_probe(tp))
+			pr_info("%s: Can not find ISA bridge\n",
+				pci_name(pdev));
 		return -EIO;
 	}
 
@@ -1702,7 +1697,7 @@ static void sis190_set_speed_auto(struct net_device *dev)
 	int phy_id = tp->mii_if.phy_id;
 	int val;
 
-	net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name);
+	netif_info(tp, link, dev, "Enabling Auto-negotiation\n");
 
 	val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
 
@@ -1829,7 +1824,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	int rc;
 
 	if (!printed_version) {
-		net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
+		if (netif_msg_drv(&debug))
+			pr_info(SIS190_DRIVER_NAME " loaded\n");
 		printed_version = 1;
 	}
 
@@ -1869,12 +1865,14 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	if (rc < 0)
 		goto err_remove_mii;
 
-	net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), %pM\n",
-		  pci_name(pdev), sis_chip_info[ent->driver_data].name,
-		  ioaddr, dev->irq, dev->dev_addr);
-
-	net_probe(tp, KERN_INFO "%s: %s mode.\n", dev->name,
-		  (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+	if (netif_msg_probe(tp)) {
+		netdev_info(dev, "%s: %s at %p (IRQ: %d), %pM\n",
+			    pci_name(pdev),
+			    sis_chip_info[ent->driver_data].name,
+			    ioaddr, dev->irq, dev->dev_addr);
+		netdev_info(dev, "%s mode.\n",
+			    (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+	}
 
 	netif_carrier_off(dev);
 
-- 
cgit v1.2.3


From cf261b2392daa7b1a18b91707485e3648dda34d3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 18 Feb 2010 23:32:26 -0800
Subject: net: Make GRETH driver depend on SPARC.

Reported by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 17ff15f6099a..46af867af85f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -997,7 +997,7 @@ config ETHOC
 
 config GRETH
 	tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
-	depends on OF
+	depends on SPARC
 	select PHYLIB
 	select CRC32
 	help
-- 
cgit v1.2.3


From 5e2f75b8993a0d83d469388b50716dd5551f2eb4 Mon Sep 17 00:00:00 2001
From: Dan Halperin <dhalperi@cs.washington.edu>
Date: Thu, 18 Feb 2010 22:01:39 -0800
Subject: iwlwifi: set HT flags after channel in rxon

The HT extension channel settings require priv->staging_rxon.channel to be
accurate. However, iwl_set_rxon_ht was being called before iwl_set_rxon_channel
and thus HT40 could be broken unless another call to iwl_mac_config came in.

This problem was recently introduced by "iwlwifi: Fix to set correct ht
configuration"

The particular setting in which I noticed this was monitor mode:

	iwconfig wlan0 mode monitor
	ifconfig wlan0 up
	./iw wlan0 set channel 64 HT40-
	#./iw wlan0 set channel 64 HT40-
	tcpdump -i wlan0 -y IEEE802_11_RADIO

would only catch HT40 packets if I issued the IW command twice.

From visual inspection, iwl_set_rxon_channel does not depend on
iwl_set_rxon_ht, so simply swapping them should be safe and fixes this problem.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index d10bea64fce3..f36f804804fc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2744,8 +2744,8 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
 			priv->staging_rxon.flags = 0;
 
-		iwl_set_rxon_ht(priv, ht_conf);
 		iwl_set_rxon_channel(priv, conf->channel);
+		iwl_set_rxon_ht(priv, ht_conf);
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
 		spin_unlock_irqrestore(&priv->lock, flags);
-- 
cgit v1.2.3


From fbc87d67af5ccd733f894273b215564c67e3a749 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Thu, 11 Feb 2010 17:56:06 -0500
Subject: Introduce PCMCIA_DEVICE_PROD_ID3

...and use it in hostap_cs and orinoco_cs.

Another PCMCIA device with Intersil Prism chipset has been reported:

Socket 0:
  product info: "Gigabyte", "GN-WLM01_P25L_ADAPTER", "ISL37300P", "Eval-RevA"
  manfid: 0x02e0, 0x1011
  function: 6 (network)

As it's the case with some other Prism based devices, the third ID
string contains a design name that should be sufficient to identify the
card as having Intersil Prism chipset and thus compatible with both
orinoco_cs and hostap_cs.

Introduce PCMCIA_DEVICE_PROD_ID3 that matches the third ID string only.

Use it in orinoco_cs and hostap_cs to match cards with the third ID
string indicating Prism chipset.  Remove corresponding entries that use
PCMCIA_DEVICE_PROD_ID123.

Reported-by: Ozzy <ozzymud@gmail.com>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/hostap/hostap_cs.c   | 17 ++++-------------
 drivers/net/wireless/orinoco/orinoco_cs.c |  9 ++++-----
 include/pcmcia/device_id.h                |  5 +++++
 3 files changed, 13 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index c9640a3e02c9..d19748d90aaf 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -793,13 +793,6 @@ static struct pcmcia_device_id hostap_cs_ids[] = {
 					 0x4b801a17),
 	PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
 				    0x7a954bd9, 0x74be00c6),
-	PCMCIA_DEVICE_PROD_ID123(
-		"Intersil", "PRISM 2_5 PCMCIA ADAPTER",	"ISL37300P",
-		0x4b801a17, 0x6345a0bf, 0xc9049a39),
-	/* D-Link DWL-650 Rev. P1; manfid 0x000b, 0x7110 */
-	PCMCIA_DEVICE_PROD_ID123(
-		"D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10",
-		0x1a424a1c, 0x6ea57632, 0xdd97a26b),
 	PCMCIA_DEVICE_PROD_ID123(
 		"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
 		0xe6ec52ce, 0x08649af2, 0x4b74baa0),
@@ -833,15 +826,13 @@ static struct pcmcia_device_id hostap_cs_ids[] = {
 		"Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
 		"Ver. 1.00",
 		0x5cd01705, 0x4271660f, 0x9d08ee12),
-	PCMCIA_DEVICE_PROD_ID123(
-		"corega", "WL PCCL-11", "ISL37300P",
-		0xa21501a, 0x59868926, 0xc9049a39),
-	PCMCIA_DEVICE_PROD_ID123(
-		"The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P",
-		0xa5f472c2, 0x9c05598d, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID123(
 		"Wireless LAN" , "11Mbps PC Card", "Version 01.02",
 		0x4b8870ff, 0x70e946d1, 0x4b74baa0),
+	PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
+	PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
+	PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
+	PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index f27bb8367c98..1d4ada188eda 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -407,7 +407,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
-	PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
 	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
 	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
@@ -417,7 +416,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
 	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
 	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
-	PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
@@ -432,7 +430,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
-	PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
 	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
 	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
@@ -445,7 +442,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
 	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
 	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
-	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
 	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
@@ -454,8 +450,11 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
-	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
+	PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
+	PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
+	PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
+	PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
diff --git a/include/pcmcia/device_id.h b/include/pcmcia/device_id.h
index c33ea08352b8..63e5b8f6b7dd 100644
--- a/include/pcmcia/device_id.h
+++ b/include/pcmcia/device_id.h
@@ -34,6 +34,11 @@
 	.prod_id = { NULL, (v2), NULL, NULL },  \
 	.prod_id_hash = { 0, (vh2), 0, 0 }, }
 
+#define PCMCIA_DEVICE_PROD_ID3(v3, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { NULL, NULL, (v3), NULL },  \
+	.prod_id_hash = { 0, 0, (vh3), 0 }, }
+
 #define PCMCIA_DEVICE_PROD_ID12(v1, v2, vh1, vh2) { \
 	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
 			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
-- 
cgit v1.2.3


From 088ea189c4c75cdf211146faa4b341a0f7476be6 Mon Sep 17 00:00:00 2001
From: Darren Jenkins <darrenrjenkins@gmail.com>
Date: Wed, 17 Feb 2010 23:40:15 +1100
Subject: drivers/net/wireless/p54/txrx.c Fix off by one error

fix off by one error in the queue size check of p54_tx_qos_accounting_alloc()

Coverity CID: 13314

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 0e8f69461ffe..66057999a93c 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -186,7 +186,7 @@ static int p54_tx_qos_accounting_alloc(struct p54_common *priv,
 	struct p54_tx_queue_stats *queue;
 	unsigned long flags;
 
-	if (WARN_ON(p54_queue > P54_QUEUE_NUM))
+	if (WARN_ON(p54_queue >= P54_QUEUE_NUM))
 		return -EINVAL;
 
 	queue = &priv->tx_stats[p54_queue];
-- 
cgit v1.2.3


From 5b9a919a97ac8bdda8020c9b366491b5b91b196e Mon Sep 17 00:00:00 2001
From: Jean-François Moine <moinejf@free.fr>
Date: Wed, 17 Feb 2010 10:59:31 -0600
Subject: p54usb: Add the USB ID for Belkin (Accton) FD7050E ver 1010ec
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Yet another USB ID.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index dcb484bd5984..b3c4fbd80d8d 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -61,6 +61,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x06b9, 0x0121)},	/* Thomson SpeedTouch 121g */
 	{USB_DEVICE(0x0707, 0xee13)},   /* SMC 2862W-G version 2 */
 	{USB_DEVICE(0x083a, 0x4521)},   /* Siemens Gigaset USB Adapter 54 version 2 */
+	{USB_DEVICE(0x083a, 0xf503)},	/* Accton FD7050E ver 1010ec  */
 	{USB_DEVICE(0x0846, 0x4240)},	/* Netgear WG111 (v2) */
 	{USB_DEVICE(0x0915, 0x2000)},	/* Cohiba Proto board */
 	{USB_DEVICE(0x0915, 0x2002)},	/* Cohiba Proto board */
-- 
cgit v1.2.3


From d8c42c0c282a5edd9ea2eef4c929d9cec2798653 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:36 +0200
Subject: wl1271: Fix PSM entry

Currently the PSM entry function assumes successful operation, and enables
ELP, BET and beacon filtering right away. This is bad, because the PSM
entry may fail due to environmental issues, which will cause the ELP, BET and
beacon filtering to be illegally enabled (because FW remains in active state.)

Fix this by enabling ELP, BET and beacon filtering only after successful entry,
and by ensuring the firmware is in active mode after the failure.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_cmd.c   |  4 ++--
 drivers/net/wireless/wl12xx/wl1271_cmd.h   |  2 +-
 drivers/net/wireless/wl12xx/wl1271_event.c | 35 ++++++++++++++++++++++++++++--
 drivers/net/wireless/wl12xx/wl1271_main.c  |  8 ++++---
 drivers/net/wireless/wl12xx/wl1271_ps.c    | 21 ++++--------------
 drivers/net/wireless/wl12xx/wl1271_ps.h    |  3 ++-
 6 files changed, 47 insertions(+), 26 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index a74259bb596b..dd2b5f0540a5 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -555,7 +555,7 @@ out:
 	return ret;
 }
 
-int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode)
+int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
 {
 	struct wl1271_cmd_ps_params *ps_params = NULL;
 	int ret = 0;
@@ -576,7 +576,7 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode)
 	}
 
 	ps_params->ps_mode = ps_mode;
-	ps_params->send_null_data = 1;
+	ps_params->send_null_data = send;
 	ps_params->retries = 5;
 	ps_params->hang_over_period = 128;
 	ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 09fe91297acf..ba433f423c8b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -38,7 +38,7 @@ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
 int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
 int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
-int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode);
+int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send);
 int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
 			   size_t len);
 int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 0a145afc9905..cecbae2ded35 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -78,24 +78,55 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 	switch (mbox->ps_status) {
 	case EVENT_ENTER_POWER_SAVE_FAIL:
+		wl1271_debug(DEBUG_PSM, "PSM entry failed");
+
 		if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+			/* remain in active mode */
 			wl->psm_entry_retry = 0;
 			break;
 		}
 
 		if (wl->psm_entry_retry < wl->conf.conn.psm_entry_retries) {
 			wl->psm_entry_retry++;
-			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
+						 true);
 		} else {
 			wl1271_error("PSM entry failed, giving up.\n");
+			/* make sure the firmware goes into active mode */
+			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+						 false);
 			wl->psm_entry_retry = 0;
 		}
 		break;
 	case EVENT_ENTER_POWER_SAVE_SUCCESS:
 		wl->psm_entry_retry = 0;
+
+		/* enable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, true);
+		if (ret < 0)
+			break;
+
+		/* enable beacon early termination */
+		ret = wl1271_acx_bet_enable(wl, true);
+		if (ret < 0)
+			break;
+
+		/* go to extremely low power mode */
+		wl1271_ps_elp_sleep(wl);
+		if (ret < 0)
+			break;
 		break;
 	case EVENT_EXIT_POWER_SAVE_FAIL:
-		wl1271_info("PSM exit failed");
+		wl1271_debug(DEBUG_PSM, "PSM exit failed");
+
+		if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+			wl->psm_entry_retry = 0;
+			break;
+		}
+
+		/* make sure the firmware goes to active mode */
+		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+					 false);
 		break;
 	case EVENT_EXIT_POWER_SAVE_SUCCESS:
 	default:
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index e4867b895c43..6f026fe63d7f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1248,7 +1248,8 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		 */
 		if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
 			wl1271_info("psm enabled");
-			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
+						 true);
 		}
 	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
 		   test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
@@ -1257,7 +1258,8 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
 
 		if (test_bit(WL1271_FLAG_PSM, &wl->flags))
-			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+						 true);
 	}
 
 	if (conf->power_level != wl->power_level) {
@@ -1637,7 +1639,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) &&
 			    !test_bit(WL1271_FLAG_PSM, &wl->flags)) {
 				mode = STATION_POWER_SAVE_MODE;
-				ret = wl1271_ps_set_mode(wl, mode);
+				ret = wl1271_ps_set_mode(wl, mode, true);
 				if (ret < 0)
 					goto out_sleep;
 			}
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index e407790f6771..29f670099d94 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -118,7 +118,8 @@ out:
 	return 0;
 }
 
-int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode)
+int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
+		       bool send)
 {
 	int ret;
 
@@ -126,21 +127,7 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode)
 	case STATION_POWER_SAVE_MODE:
 		wl1271_debug(DEBUG_PSM, "entering psm");
 
-		/* enable beacon filtering */
-		ret = wl1271_acx_beacon_filter_opt(wl, true);
-		if (ret < 0)
-			return ret;
-
-		/* enable beacon early termination */
-		ret = wl1271_acx_bet_enable(wl, true);
-		if (ret < 0)
-			return ret;
-
-		ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
-		if (ret < 0)
-			return ret;
-
-		wl1271_ps_elp_sleep(wl);
+		ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE, send);
 		if (ret < 0)
 			return ret;
 
@@ -163,7 +150,7 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode)
 		if (ret < 0)
 			return ret;
 
-		ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+		ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE, send);
 		if (ret < 0)
 			return ret;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.h b/drivers/net/wireless/wl12xx/wl1271_ps.h
index 779653d0ae85..940276f517a4 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.h
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.h
@@ -27,7 +27,8 @@
 #include "wl1271.h"
 #include "wl1271_acx.h"
 
-int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode);
+int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
+		       bool send);
 void wl1271_ps_elp_sleep(struct wl1271 *wl);
 int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake);
 void wl1271_elp_work(struct work_struct *work);
-- 
cgit v1.2.3


From ddb01a5b368270f3cc86b606ba6f7ee8795a8a99 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:37 +0200
Subject: wl1271: Fix channel changing code

The channel changing code would a) change the BSSID to a dummy on upon
channel change, breaking connectivity, and b) not update the channel number
at all for ad-hoc, breaking adhoc.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 6f026fe63d7f..8b46b7069f1f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1234,8 +1234,16 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 	/* if the channel changes while joined, join again */
-	if (channel != wl->channel && test_bit(WL1271_FLAG_JOINED, &wl->flags))
-		wl1271_join_channel(wl, channel);
+	if (channel != wl->channel &&
+	    test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
+		wl->channel = channel;
+		/* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */
+		ret = wl1271_cmd_join(wl);
+		if (ret < 0)
+			wl1271_warning("cmd join to update channel failed %d",
+				       ret);
+	} else
+		wl->channel = channel;
 
 	if (conf->flags & IEEE80211_CONF_PS &&
 	    !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
-- 
cgit v1.2.3


From 30240fc76a57e37a4bb42976ff7162b5e45e6117 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:38 +0200
Subject: wl1271: Add SSID configuration for JOIN in ad-hoc

This patch adds code to extract the SSID from the beacon template used for
ad-hoc. The mac80211 currently does not provide the SSID, so this is a
workaround for that, for now.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_event.c | 10 ++++-
 drivers/net/wireless/wl12xx/wl1271_main.c  | 69 +++++++++++++++++++-----------
 2 files changed, 51 insertions(+), 28 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index cecbae2ded35..2803e700a75a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -92,7 +92,12 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 						 true);
 		} else {
 			wl1271_error("PSM entry failed, giving up.\n");
-			/* make sure the firmware goes into active mode */
+			/* FIXME: this may need to be reconsidered. for now it
+			   is not possible to indicate to the mac80211
+			   afterwards that PSM entry failed. To maximize
+			   functionality (receiving data and remaining
+			   associated) make sure that we are in sync with the
+			   AP in regard of PSM mode. */
 			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
 						 false);
 			wl->psm_entry_retry = 0;
@@ -124,7 +129,8 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 			break;
 		}
 
-		/* make sure the firmware goes to active mode */
+		/* make sure the firmware goes to active mode - the frame to
+		   be sent next will indicate to the AP, that we are active. */
 		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
 					 false);
 		break;
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 8b46b7069f1f..a3742c8052d4 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1549,6 +1549,23 @@ out:
 	return ret;
 }
 
+static void wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *beacon)
+{
+	u8 *ptr = beacon->data +
+		offsetof(struct ieee80211_mgmt, u.beacon.variable);
+
+	/* find the location of the ssid in the beacon */
+	while (ptr < beacon->data + beacon->len) {
+		if (ptr[0] == WLAN_EID_SSID) {
+			wl->ssid_len = ptr[1];
+			memcpy(wl->ssid, ptr+2, wl->ssid_len);
+			return;
+		}
+		ptr += ptr[1];
+	}
+	wl1271_error("ad-hoc beacon template has no SSID!\n");
+}
+
 static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
 				       struct ieee80211_bss_conf *bss_conf,
@@ -1566,40 +1583,17 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out;
 
-	if ((changed & BSS_CHANGED_BSSID) &&
-	    /*
-	     * Now we know the correct bssid, so we send a new join command
-	     * and enable the BSSID filter
-	     */
-	    memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
-			wl->rx_config |= CFG_BSSID_FILTER_EN;
-			memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
-			ret = wl1271_cmd_build_null_data(wl);
-			if (ret < 0) {
-				wl1271_warning("cmd buld null data failed %d",
-					       ret);
-				goto out_sleep;
-			}
-			ret = wl1271_cmd_join(wl);
-			if (ret < 0) {
-				wl1271_warning("cmd join failed %d", ret);
-				goto out_sleep;
-			}
-			set_bit(WL1271_FLAG_JOINED, &wl->flags);
-	}
-
 	if (wl->bss_type == BSS_TYPE_IBSS) {
 		/* FIXME: This implements rudimentary ad-hoc support -
 		   proper templates are on the wish list and notification
 		   on when they change. This patch will update the templates
-		   on every call to this function. Also, the firmware will not
-		   answer to probe-requests as it does not have the proper
-		   SSID set in the JOIN command. The probe-response template
-		   is set nevertheless, as the FW will ASSERT without it */
+		   on every call to this function. */
 		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
 
 		if (beacon) {
 			struct ieee80211_hdr *hdr;
+
+			wl1271_ssid_set(wl, beacon);
 			ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
 						      beacon->data,
 						      beacon->len);
@@ -1624,6 +1618,29 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	if ((changed & BSS_CHANGED_BSSID) &&
+	    /*
+	     * Now we know the correct bssid, so we send a new join command
+	     * and enable the BSSID filter
+	     */
+	    memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
+			wl->rx_config |= CFG_BSSID_FILTER_EN;
+			memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+			ret = wl1271_cmd_build_null_data(wl);
+			if (ret < 0) {
+				wl1271_warning("cmd buld null data failed %d",
+					       ret);
+				goto out_sleep;
+			}
+
+			ret = wl1271_cmd_join(wl);
+			if (ret < 0) {
+				wl1271_warning("cmd join failed %d", ret);
+				goto out_sleep;
+			}
+			set_bit(WL1271_FLAG_JOINED, &wl->flags);
+	}
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
-- 
cgit v1.2.3


From 243eeb51eaa0a33caeff3e2275b2460eea5579ec Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Feb 2010 13:25:39 +0200
Subject: wl1271: modify wl1271_acx_ac_cfg() to use function parameters

For WMM we need to configure each queue separately so modify
wl1271_acx_ac_cfg() to take the configuration from function parameters
instead.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.c  | 31 ++++++++++++++-----------------
 drivers/net/wireless/wl12xx/wl1271_acx.h  |  3 ++-
 drivers/net/wireless/wl12xx/wl1271_init.c | 14 ++++++++++----
 3 files changed, 26 insertions(+), 22 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 0b3434843476..4b052eedbd4b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -830,12 +830,14 @@ out:
 	return ret;
 }
 
-int wl1271_acx_ac_cfg(struct wl1271 *wl)
+int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max,
+		      u8 aifsn, u16 txop)
 {
 	struct acx_ac_cfg *acx;
-	int i, ret = 0;
+	int ret = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx access category config");
+	wl1271_debug(DEBUG_ACX, "acx ac cfg %d cw_ming %d cw_max %d "
+		     "aifs %d txop %d", ac, cw_min, cw_max, aifsn, txop);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 
@@ -844,21 +846,16 @@ int wl1271_acx_ac_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
-	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
-		struct conf_tx_ac_category *c = &(wl->conf.tx.ac_conf[i]);
-		acx->ac = c->ac;
-		acx->cw_min = c->cw_min;
-		acx->cw_max = cpu_to_le16(c->cw_max);
-		acx->aifsn = c->aifsn;
-		acx->reserved = 0;
-		acx->tx_op_limit = cpu_to_le16(c->tx_op_limit);
+	acx->ac = ac;
+	acx->cw_min = cw_min;
+	acx->cw_max = cpu_to_le16(cw_max);
+	acx->aifsn = aifsn;
+	acx->tx_op_limit = cpu_to_le16(txop);
 
-		ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
-		if (ret < 0) {
-			wl1271_warning("Setting of access category "
-				       "config: %d", ret);
-			goto out;
-		}
+	ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx ac cfg failed: %d", ret);
+		goto out;
 	}
 
 out:
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 1bb63af64f0e..e5f5cbd7f0ea 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -1070,7 +1070,8 @@ int wl1271_acx_cts_protect(struct wl1271 *wl,
 			   enum acx_ctsprotect_type ctsprotect);
 int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
 int wl1271_acx_rate_policies(struct wl1271 *wl);
-int wl1271_acx_ac_cfg(struct wl1271 *wl);
+int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max,
+		      u8 aifsn, u16 txop);
 int wl1271_acx_tid_cfg(struct wl1271 *wl);
 int wl1271_acx_frag_threshold(struct wl1271 *wl);
 int wl1271_acx_tx_config_options(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index c9848eecb767..2b56a9ecd7f2 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -195,7 +195,8 @@ static int wl1271_init_beacon_broadcast(struct wl1271 *wl)
 
 int wl1271_hw_init(struct wl1271 *wl)
 {
-	int ret;
+	struct conf_tx_ac_category *conf_ac;
+	int ret, i;
 
 	ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0)
@@ -279,9 +280,14 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Default AC configuration */
-	ret = wl1271_acx_ac_cfg(wl);
-	if (ret < 0)
-		goto out_free_memmap;
+	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+		conf_ac = &wl->conf.tx.ac_conf[i];
+		ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min,
+					conf_ac->cw_max, conf_ac->aifsn,
+					conf_ac->tx_op_limit);
+		if (ret < 0)
+			goto out_free_memmap;
+	}
 
 	/* Configure TX rate classes */
 	ret = wl1271_acx_rate_policies(wl);
-- 
cgit v1.2.3


From f2054df5170734eacd1db82138c70746ec8387de Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Feb 2010 13:25:40 +0200
Subject: wl1271: modify wl1271_acx_tid_cfg() to use function parameters

For WMM we need to configure each tid separately so modify
wl1271_acx_tid_cfg() to take the configuration from function parameters
instead.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.c  | 31 +++++++++++++++----------------
 drivers/net/wireless/wl12xx/wl1271_acx.h  |  4 +++-
 drivers/net/wireless/wl12xx/wl1271_init.c | 16 +++++++++++++---
 3 files changed, 31 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 4b052eedbd4b..60f10dce4800 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -863,10 +863,12 @@ out:
 	return ret;
 }
 
-int wl1271_acx_tid_cfg(struct wl1271 *wl)
+int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type,
+		       u8 tsid, u8 ps_scheme, u8 ack_policy,
+		       u32 apsd_conf0, u32 apsd_conf1)
 {
 	struct acx_tid_config *acx;
-	int i, ret = 0;
+	int ret = 0;
 
 	wl1271_debug(DEBUG_ACX, "acx tid config");
 
@@ -877,21 +879,18 @@ int wl1271_acx_tid_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
-	for (i = 0; i < wl->conf.tx.tid_conf_count; i++) {
-		struct conf_tx_tid *c = &(wl->conf.tx.tid_conf[i]);
-		acx->queue_id = c->queue_id;
-		acx->channel_type = c->channel_type;
-		acx->tsid = c->tsid;
-		acx->ps_scheme = c->ps_scheme;
-		acx->ack_policy = c->ack_policy;
-		acx->apsd_conf[0] = cpu_to_le32(c->apsd_conf[0]);
-		acx->apsd_conf[1] = cpu_to_le32(c->apsd_conf[1]);
+	acx->queue_id = queue_id;
+	acx->channel_type = channel_type;
+	acx->tsid = tsid;
+	acx->ps_scheme = ps_scheme;
+	acx->ack_policy = ack_policy;
+	acx->apsd_conf[0] = cpu_to_le32(apsd_conf0);
+	acx->apsd_conf[1] = cpu_to_le32(apsd_conf1);
 
-		ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
-		if (ret < 0) {
-			wl1271_warning("Setting of tid config failed: %d", ret);
-			goto out;
-		}
+	ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("Setting of tid config failed: %d", ret);
+		goto out;
 	}
 
 out:
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index e5f5cbd7f0ea..ac94a13ea747 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -1072,7 +1072,9 @@ int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
 int wl1271_acx_rate_policies(struct wl1271 *wl);
 int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max,
 		      u8 aifsn, u16 txop);
-int wl1271_acx_tid_cfg(struct wl1271 *wl);
+int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type,
+		       u8 tsid, u8 ps_scheme, u8 ack_policy,
+		       u32 apsd_conf0, u32 apsd_conf1);
 int wl1271_acx_frag_threshold(struct wl1271 *wl);
 int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl1271_acx_mem_cfg(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 2b56a9ecd7f2..78403daab949 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -196,6 +196,7 @@ static int wl1271_init_beacon_broadcast(struct wl1271 *wl)
 int wl1271_hw_init(struct wl1271 *wl)
 {
 	struct conf_tx_ac_category *conf_ac;
+	struct conf_tx_tid *conf_tid;
 	int ret, i;
 
 	ret = wl1271_cmd_general_parms(wl);
@@ -275,9 +276,18 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Default TID configuration */
-	ret = wl1271_acx_tid_cfg(wl);
-	if (ret < 0)
-		goto out_free_memmap;
+	for (i = 0; i < wl->conf.tx.tid_conf_count; i++) {
+		conf_tid = &wl->conf.tx.tid_conf[i];
+		ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id,
+					 conf_tid->channel_type,
+					 conf_tid->tsid,
+					 conf_tid->ps_scheme,
+					 conf_tid->ack_policy,
+					 conf_tid->apsd_conf[0],
+					 conf_tid->apsd_conf[1]);
+		if (ret < 0)
+			goto out_free_memmap;
+	}
 
 	/* Default AC configuration */
 	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
-- 
cgit v1.2.3


From c6999d831ab9ae5e368b20f3bc11b0ca9c17a7ec Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Feb 2010 13:25:41 +0200
Subject: wl1271: implement WMM

Now that necessary commands for WMM are implemented, implement queue handling
for WMM. But WMM is not enabled yet, only one queue is used.

Based on a similar patch from wl1251.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 31 ++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_tx.c   | 10 +++++----
 drivers/net/wireless/wl12xx/wl1271_tx.h   | 36 +++++++++++++++++++++++++++++++
 3 files changed, 73 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index a3742c8052d4..6f7a7d946359 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1712,6 +1712,36 @@ out:
 	mutex_unlock(&wl->mutex);
 }
 
+static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	struct wl1271 *wl = hw->priv;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
+
+	ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
+				params->cw_min, params->cw_max,
+				params->aifs, params->txop);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
+				 CONF_CHANNEL_TYPE_EDCF,
+				 wl1271_tx_get_queue(queue),
+				 CONF_PS_SCHEME_LEGACY_PSPOLL,
+				 CONF_ACK_POLICY_LEGACY, 0, 0);
+	if (ret < 0)
+		goto out;
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
 
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
@@ -1877,6 +1907,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.hw_scan = wl1271_op_hw_scan,
 	.bss_info_changed = wl1271_op_bss_info_changed,
 	.set_rts_threshold = wl1271_op_set_rts_threshold,
+	.conf_tx = wl1271_op_conf_tx,
 };
 
 static int wl1271_register_hw(struct wl1271 *wl)
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index a288cc317d7b..f6815a9239e5 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -87,7 +87,7 @@ static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 			      u32 extra, struct ieee80211_tx_info *control)
 {
 	struct wl1271_tx_hw_descr *desc;
-	int pad;
+	int pad, ac;
 	u16 tx_attr;
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
@@ -107,9 +107,11 @@ static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 
 	/* configure the tx attributes */
 	tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
-	/* FIXME: do we know the packet priority? can we identify mgmt
-	   packets, and use max prio for them at least? */
-	desc->tid = 0;
+
+	/* queue */
+	ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
+	desc->tid = wl1271_tx_ac_to_tid(ac);
+
 	desc->aid = TX_HW_DEFAULT_AID;
 	desc->reserved = 0;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h
index 416396caf0a0..17e405a09caa 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.h
@@ -123,6 +123,42 @@ struct wl1271_tx_hw_res_if {
 	struct wl1271_tx_hw_res_descr tx_results_queue[TX_HW_RESULT_QUEUE_LEN];
 } __attribute__ ((packed));
 
+static inline int wl1271_tx_get_queue(int queue)
+{
+	/* FIXME: use best effort until WMM is enabled */
+	return CONF_TX_AC_BE;
+
+	switch (queue) {
+	case 0:
+		return CONF_TX_AC_VO;
+	case 1:
+		return CONF_TX_AC_VI;
+	case 2:
+		return CONF_TX_AC_BE;
+	case 3:
+		return CONF_TX_AC_BK;
+	default:
+		return CONF_TX_AC_BE;
+	}
+}
+
+/* wl1271 tx descriptor needs the tid and we need to convert it from ac */
+static inline int wl1271_tx_ac_to_tid(int ac)
+{
+	switch (ac) {
+	case 0:
+		return 0;
+	case 1:
+		return 2;
+	case 2:
+		return 4;
+	case 3:
+		return 6;
+	default:
+		return 0;
+	}
+}
+
 void wl1271_tx_work(struct work_struct *work);
 void wl1271_tx_complete(struct wl1271 *wl, u32 count);
 void wl1271_tx_flush(struct wl1271 *wl);
-- 
cgit v1.2.3


From 152ee6e09e2ce54d7d1cc9d338b82c0bf3cbbc95 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:42 +0200
Subject: wl1271: Use NVS INI file configuration

Replace the hardcoded general and radio parameter configuration in the driver
with configuration taken from the NVS file directly. Also remove the driver
dependency to the structures with the parameter data.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271.h      |  32 ++++++-
 drivers/net/wireless/wl12xx/wl1271_boot.c |  29 +++---
 drivers/net/wireless/wl12xx/wl1271_cmd.c  | 117 ++++--------------------
 drivers/net/wireless/wl12xx/wl1271_cmd.h  |  86 +++---------------
 drivers/net/wireless/wl12xx/wl1271_conf.h | 144 +-----------------------------
 drivers/net/wireless/wl12xx/wl1271_main.c | 101 ++-------------------
 6 files changed, 77 insertions(+), 432 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index d0938db043b3..b3a3402593dd 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -109,7 +109,33 @@ enum {
 
 #define WL1271_FW_NAME "wl1271-fw.bin"
 #define WL1271_NVS_NAME "wl1271-nvs.bin"
-#define WL1271_NVS_LEN  468
+
+/* NVS data structure */
+#define WL1271_NVS_SECTION_SIZE                  468
+
+#define WL1271_NVS_GENERAL_PARAMS_SIZE            57
+#define WL1271_NVS_GENERAL_PARAMS_SIZE_PADDED \
+	(WL1271_NVS_GENERAL_PARAMS_SIZE + 1)
+#define WL1271_NVS_STAT_RADIO_PARAMS_SIZE         17
+#define WL1271_NVS_STAT_RADIO_PARAMS_SIZE_PADDED \
+	(WL1271_NVS_STAT_RADIO_PARAMS_SIZE + 1)
+#define WL1271_NVS_DYN_RADIO_PARAMS_SIZE          65
+#define WL1271_NVS_DYN_RADIO_PARAMS_SIZE_PADDED \
+	(WL1271_NVS_DYN_RADIO_PARAMS_SIZE + 1)
+#define WL1271_NVS_FEM_COUNT                       2
+#define WL1271_NVS_INI_SPARE_SIZE                124
+
+struct wl1271_nvs_file {
+	/* NVS section */
+	u8 nvs[WL1271_NVS_SECTION_SIZE];
+
+	/* INI section */
+	u8 general_params[WL1271_NVS_GENERAL_PARAMS_SIZE_PADDED];
+	u8 stat_radio_params[WL1271_NVS_STAT_RADIO_PARAMS_SIZE_PADDED];
+	u8 dyn_radio_params[WL1271_NVS_FEM_COUNT]
+			   [WL1271_NVS_DYN_RADIO_PARAMS_SIZE_PADDED];
+	u8 ini_spare[WL1271_NVS_INI_SPARE_SIZE];
+} __attribute__ ((packed));
 
 /*
  * Enable/disable 802.11a support for WL1273
@@ -342,8 +368,7 @@ struct wl1271 {
 
 	u8 *fw;
 	size_t fw_len;
-	u8 *nvs;
-	size_t nvs_len;
+	struct wl1271_nvs_file *nvs;
 
 	u8 bssid[ETH_ALEN];
 	u8 mac_addr[ETH_ALEN];
@@ -461,6 +486,7 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 static inline bool wl1271_11a_enabled(void)
 {
+	/* FIXME: this could be determined based on the NVS-INI file */
 #ifdef WL1271_80211A_ENABLED
 	return true;
 #else
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index e803b876f3f0..bc3fe0275cac 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -219,29 +219,22 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	size_t nvs_len, burst_len;
 	int i;
 	u32 dest_addr, val;
-	u8 *nvs_ptr, *nvs, *nvs_aligned;
+	u8 *nvs_ptr, *nvs_aligned;
 
-	nvs = wl->nvs;
-	if (nvs == NULL)
+	if (wl->nvs == NULL)
 		return -ENODEV;
 
-	if (wl->nvs_len < WL1271_NVS_LEN)
-		return -EINVAL;
-
-	nvs_ptr = nvs;
-
 	/* only the first part of the NVS needs to be uploaded */
-	nvs_len = WL1271_NVS_LEN;
-
-	/* FIXME: read init settings from the remaining part of the NVS */
+	nvs_len = sizeof(wl->nvs->nvs);
+	nvs_ptr = (u8 *)wl->nvs->nvs;
 
 	/* Update the device MAC address into the nvs */
-	nvs[11] = wl->mac_addr[0];
-	nvs[10] = wl->mac_addr[1];
-	nvs[6] = wl->mac_addr[2];
-	nvs[5] = wl->mac_addr[3];
-	nvs[4] = wl->mac_addr[4];
-	nvs[3] = wl->mac_addr[5];
+	nvs_ptr[11] = wl->mac_addr[0];
+	nvs_ptr[10] = wl->mac_addr[1];
+	nvs_ptr[6] = wl->mac_addr[2];
+	nvs_ptr[5] = wl->mac_addr[3];
+	nvs_ptr[4] = wl->mac_addr[4];
+	nvs_ptr[3] = wl->mac_addr[5];
 
 	/*
 	 * Layout before the actual NVS tables:
@@ -283,7 +276,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	 * is 7 bytes further.
 	 */
 	nvs_ptr += 7;
-	nvs_len -= nvs_ptr - nvs;
+	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
 	nvs_len = ALIGN(nvs_len, 4);
 
 	/* FIXME: The driver sets the partition here, but this is not needed,
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index dd2b5f0540a5..54b5124fc0c0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -191,43 +191,19 @@ static int wl1271_cmd_cal(struct wl1271 *wl)
 int wl1271_cmd_general_parms(struct wl1271 *wl)
 {
 	struct wl1271_general_parms_cmd *gen_parms;
-	struct conf_general_parms *g = &wl->conf.init.genparam;
 	int ret;
 
+	if (!wl->nvs)
+		return -ENODEV;
+
 	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
 	if (!gen_parms)
 		return -ENOMEM;
 
 	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
 
-	gen_parms->ref_clk = g->ref_clk;
-	gen_parms->settling_time = g->settling_time;
-	gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
-	gen_parms->dc2dcmode = g->dc2dcmode;
-	gen_parms->single_dual_band = g->single_dual_band;
-	gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
-	gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
-	gen_parms->settings = g->settings;
-
-	gen_parms->sr_state = g->sr_state;
-
-	memcpy(gen_parms->srf1,
-	       g->srf1,
-	       CONF_MAX_SMART_REFLEX_PARAMS);
-	memcpy(gen_parms->srf2,
-	       g->srf2,
-	       CONF_MAX_SMART_REFLEX_PARAMS);
-	memcpy(gen_parms->srf3,
-	       g->srf3,
-	       CONF_MAX_SMART_REFLEX_PARAMS);
-	memcpy(gen_parms->sr_debug_table,
-	       g->sr_debug_table,
-	       CONF_MAX_SMART_REFLEX_PARAMS);
-
-	gen_parms->sr_sen_n_p = g->sr_sen_n_p;
-	gen_parms->sr_sen_n_p_gain = g->sr_sen_n_p_gain;
-	gen_parms->sr_sen_nrn = g->sr_sen_nrn;
-	gen_parms->sr_sen_prn = g->sr_sen_prn;
+	memcpy(gen_parms->params, wl->nvs->general_params,
+	       WL1271_NVS_GENERAL_PARAMS_SIZE);
 
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
 	if (ret < 0)
@@ -240,8 +216,11 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
 int wl1271_cmd_radio_parms(struct wl1271 *wl)
 {
 	struct wl1271_radio_parms_cmd *radio_parms;
-	struct conf_radio_parms *r = &wl->conf.init.radioparam;
-	int i, ret;
+	struct conf_radio_parms *rparam = &wl->conf.init.radioparam;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
 
 	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
 	if (!radio_parms)
@@ -249,73 +228,13 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 
 	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
 
-	/* Static radio parameters */
-	radio_parms->rx_trace_loss = r->rx_trace_loss;
-	radio_parms->tx_trace_loss = r->tx_trace_loss;
-	memcpy(radio_parms->rx_rssi_and_proc_compens,
-	       r->rx_rssi_and_proc_compens,
-	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
-
-	memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->rx_rssi_and_proc_compens_5,
-	       r->rx_rssi_and_proc_compens_5,
-	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
-
-	/* Dynamic radio parameters */
-	radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
-	radio_parms->tx_ref_power = r->tx_ref_power;
-	radio_parms->tx_offset_db = r->tx_offset_db;
-
-	memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_rate_limits_extreme, r->tx_rate_limits_extreme,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-
-	memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
-	       CONF_NUMBER_OF_CHANNELS_2_4);
-	memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
-	       CONF_NUMBER_OF_CHANNELS_2_4);
-	memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
-
-	radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
-	radio_parms->degraded_low_to_normal_threshold =
-		r->degraded_low_to_normal_threshold;
-	radio_parms->degraded_normal_to_high_threshold =
-		r->degraded_normal_to_high_threshold;
-
-
-	for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
-		radio_parms->tx_ref_pd_voltage_5[i] =
-			cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
-	memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
-	       CONF_NUMBER_OF_SUB_BANDS_5);
-	memcpy(radio_parms->tx_rate_limits_normal_5,
-	       r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_rate_limits_degraded_5,
-	       r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_rate_limits_extreme_5,
-	       r->tx_rate_limits_extreme_5, CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_channel_limits_ofdm_5,
-	       r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
-	memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
-	       CONF_NUMBER_OF_RATE_GROUPS);
-	memcpy(radio_parms->rx_fem_insertion_loss_5,
-	       r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
-	radio_parms->degraded_low_to_normal_threshold_5 =
-		r->degraded_low_to_normal_threshold_5;
-	radio_parms->degraded_normal_to_high_threshold_5 =
-		r->degraded_normal_to_high_threshold_5;
+	memcpy(radio_parms->stat_radio_params, wl->nvs->stat_radio_params,
+	       WL1271_NVS_STAT_RADIO_PARAMS_SIZE);
+	memcpy(radio_parms->dyn_radio_params,
+	       wl->nvs->dyn_radio_params[rparam->fem],
+	       WL1271_NVS_DYN_RADIO_PARAMS_SIZE);
+
+	/* FIXME: current NVS is missing 5GHz parameters */
 
 	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
 		    radio_parms, sizeof(*radio_parms));
@@ -1022,7 +941,7 @@ int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("could not set keys");
-		goto out;
+	goto out;
 	}
 
 out:
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index ba433f423c8b..2dc06c73532b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -428,90 +428,24 @@ struct wl1271_general_parms_cmd {
 
 	struct wl1271_cmd_test_header test;
 
-	u8 ref_clk;
-	u8 settling_time;
-	u8 clk_valid_on_wakeup;
-	u8 dc2dcmode;
-	u8 single_dual_band;
-
-	u8 tx_bip_fem_autodetect;
-	u8 tx_bip_fem_manufacturer;
-	u8 settings;
-
-	u8 sr_state;
-
-	s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
-	s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
-	s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
-
-	s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
-
-	u8 sr_sen_n_p;
-	u8 sr_sen_n_p_gain;
-	u8 sr_sen_nrn;
-	u8 sr_sen_prn;
-
-	u8 padding[3];
+	u8 params[WL1271_NVS_GENERAL_PARAMS_SIZE];
+	s8 reserved[23];
 } __attribute__ ((packed));
 
+#define WL1271_STAT_RADIO_PARAMS_5_SIZE    29
+#define WL1271_DYN_RADIO_PARAMS_5_SIZE    104
+
 struct wl1271_radio_parms_cmd {
 	struct wl1271_cmd_header header;
 
 	struct wl1271_cmd_test_header test;
 
-	/* Static radio parameters */
-	/* 2.4GHz */
-	u8 rx_trace_loss;
-	u8 tx_trace_loss;
-	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/* 5GHz */
-	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/* Dynamic radio parameters */
-	/* 2.4GHz */
-	__le16 tx_ref_pd_voltage;
-	u8  tx_ref_power;
-	s8  tx_offset_db;
-
-	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
+	u8 stat_radio_params[WL1271_NVS_STAT_RADIO_PARAMS_SIZE];
+	u8 stat_radio_params_5[WL1271_STAT_RADIO_PARAMS_5_SIZE];
 
-	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
-
-	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
-	u8  rx_fem_insertion_loss;
-
-	u8  degraded_low_to_normal_threshold;
-	u8  degraded_normal_to_high_threshold;
-
-	u8  padding1; /* our own padding, not in ref driver */
-
-	/* 5GHz */
-	__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
-	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	/* FIXME: this is inconsistent with the types for 2.4GHz */
-	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	u8  degraded_low_to_normal_threshold_5;
-	u8  degraded_normal_to_high_threshold_5;
-
-	u8 padding2[2];
+	u8 dyn_radio_params[WL1271_NVS_DYN_RADIO_PARAMS_SIZE];
+	u8 reserved;
+	u8 dyn_radio_params_5[WL1271_DYN_RADIO_PARAMS_5_SIZE];
 } __attribute__ ((packed));
 
 struct wl1271_cmd_cal_channel_tune {
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 1993d63c214e..6f9e75cc5640 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -735,81 +735,6 @@ enum single_dual_band_enum {
 	CONF_DUAL_BAND
 };
 
-
-#define CONF_MAX_SMART_REFLEX_PARAMS 16
-
-struct conf_general_parms {
-	/*
-	 * RF Reference Clock type / speed
-	 *
-	 * Range: CONF_REF_CLK_*
-	 */
-	u8 ref_clk;
-
-	/*
-	 * Settling time of the reference clock after boot.
-	 *
-	 * Range: u8
-	 */
-	u8 settling_time;
-
-	/*
-	 * Flag defining whether clock is valid on wakeup.
-	 *
-	 * Range: 0 - not valid on wakeup, 1 - valid on wakeup
-	 */
-	u8 clk_valid_on_wakeup;
-
-	/*
-	 * DC-to-DC mode.
-	 *
-	 * Range: Unknown
-	 */
-	u8 dc2dcmode;
-
-	/*
-	 * Flag defining whether used as single or dual-band.
-	 *
-	 * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND
-	 */
-	u8 single_dual_band;
-
-	/*
-	 * TX bip fem autodetect flag.
-	 *
-	 * Range: Unknown
-	 */
-	u8 tx_bip_fem_autodetect;
-
-	/*
-	 * TX bip gem manufacturer.
-	 *
-	 * Range: Unknown
-	 */
-	u8 tx_bip_fem_manufacturer;
-
-	/*
-	 * Settings flags.
-	 *
-	 * Range: Unknown
-	 */
-	u8 settings;
-
-	/* Smart reflex settings */
-	u8 sr_state;
-
-	s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
-	s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
-	s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
-
-	s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
-
-	u8 sr_sen_n_p;
-	u8 sr_sen_n_p_gain;
-	u8 sr_sen_nrn;
-	u8 sr_sen_prn;
-};
-
 #define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
 #define CONF_NUMBER_OF_SUB_BANDS_5  7
 #define CONF_NUMBER_OF_RATE_GROUPS  6
@@ -818,77 +743,14 @@ struct conf_general_parms {
 
 struct conf_radio_parms {
 	/*
-	 * Static radio parameters for 2.4GHz
-	 *
-	 * Range: unknown
-	 */
-	u8 rx_trace_loss;
-	u8 tx_trace_loss;
-	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/*
-	 * Static radio parameters for 5GHz
-	 *
-	 * Range: unknown
-	 */
-	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/*
-	 * Dynamic radio parameters for 2.4GHz
+	 * FEM parameter set to use
 	 *
-	 * Range: unknown
+	 * Range: 0 or 1
 	 */
-	u16 tx_ref_pd_voltage;
-	u8  tx_ref_power;
-	s8  tx_offset_db;
-
-	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
-
-	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
-	u8  rx_fem_insertion_loss;
-
-	u8  degraded_low_to_normal_threshold;
-	u8  degraded_normal_to_high_threshold;
-
-
-	/*
-	 * Dynamic radio parameters for 5GHz
-	 *
-	 * Range: unknown
-	 */
-	u16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
-	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	/* FIXME: this is inconsistent with the types for 2.4GHz */
-	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	u8  degraded_low_to_normal_threshold_5;
-	u8  degraded_normal_to_high_threshold_5;
+	u8 fem;
 };
 
 struct conf_init_settings {
-	/*
-	 * Configure general parameters.
-	 */
-	struct conf_general_parms genparam;
-
 	/*
 	 * Configure radio parameters.
 	 */
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 6f7a7d946359..282c2bbfec86 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -229,93 +229,8 @@ static struct conf_drv_settings default_conf = {
 		.psm_entry_retries           = 3
 	},
 	.init = {
-		.genparam                    = {
-			.ref_clk             = CONF_REF_CLK_38_4_E,
-			.settling_time       = 5,
-			.clk_valid_on_wakeup = 0,
-			.dc2dcmode           = 0,
-			.single_dual_band    = CONF_SINGLE_BAND,
-			.tx_bip_fem_autodetect = 1,
-			.tx_bip_fem_manufacturer = 1,
-			.settings = 1,
-			.sr_state = 1,
-			.srf1 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
-				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
-			.srf2 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
-				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
-			.srf3 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
-				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
-			.sr_debug_table = { 0, 0, 0, 0, 0, 0, 0, 0,
-					    0, 0, 0, 0, 0, 0, 0, 0 },
-			.sr_sen_n_p = 0,
-			.sr_sen_n_p_gain = 0,
-			.sr_sen_nrn = 0,
-			.sr_sen_prn = 0,
-		},
 		.radioparam = {
-			.rx_trace_loss       = 0x24,
-			.tx_trace_loss       = 0x0,
-			.rx_rssi_and_proc_compens = {
-				0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
-				0xfc, 0x00, 0x80, 0x10, 0xf0, 0xf8,
-				0x00, 0x0a, 0x14 },
-			.rx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
-			.tx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
-			.rx_rssi_and_proc_compens_5 = {
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00, 0x00, 0x00 },
-			.tx_ref_pd_voltage   = 0x1a9,
-			.tx_ref_power        = 0x80,
-			.tx_offset_db        = 0x0,
-			.tx_rate_limits_normal = {
-				0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
-			.tx_rate_limits_degraded = {
-				0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
-			.tx_rate_limits_extreme = {
-				0x19, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
-			.tx_channel_limits_11b = {
-				0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
-				0x22, 0x50 },
-			.tx_channel_limits_ofdm = {
-				0x20, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
-				0x20, 0x50 },
-			.tx_pdv_rate_offsets = {
-				0x07, 0x08, 0x04, 0x02, 0x02, 0x00 },
-			.tx_ibias            = {
-				0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
-			.rx_fem_insertion_loss = 0x0e,
-			.degraded_low_to_normal_threshold = 0x1e,
-			.degraded_normal_to_high_threshold = 0x2d,
-			.tx_ref_pd_voltage_5 = {
-				0x0190, 0x01a4, 0x01c3, 0x01d8,
-				0x020a, 0x021c },
-			.tx_ref_power_5      = {
-				0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80 },
-			.tx_offset_db_5      = {
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-			.tx_rate_limits_normal_5 = {
-				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
-			.tx_rate_limits_degraded_5 = {
-				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
-			.tx_rate_limits_extreme_5 = {
-				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
-			.tx_channel_limits_ofdm_5 = {
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50 },
-			.tx_pdv_rate_offsets_5 = {
-				0x01, 0x02, 0x02, 0x02, 0x02, 0x00 },
-			.tx_ibias_5          = {
-				0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
-			.rx_fem_insertion_loss_5 = {
-				0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
-			.degraded_low_to_normal_threshold_5 = 0x00,
-			.degraded_normal_to_high_threshold_5 = 0x00
+			.fem                 = 1,
 		}
 	},
 	.itrim = {
@@ -345,9 +260,6 @@ static void wl1271_conf_init(struct wl1271 *wl)
 
 	/* apply driver default configuration */
 	memcpy(&wl->conf, &default_conf, sizeof(default_conf));
-
-	if (wl1271_11a_enabled())
-		wl->conf.init.genparam.single_dual_band = CONF_DUAL_BAND;
 }
 
 
@@ -567,15 +479,14 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 		return ret;
 	}
 
-	if (fw->size % 4) {
-		wl1271_error("nvs size is not multiple of 32 bits: %zu",
-			     fw->size);
+	if (fw->size != sizeof(struct wl1271_nvs_file)) {
+		wl1271_error("nvs size is not as expected: %zu != %zu",
+			     fw->size, sizeof(struct wl1271_nvs_file));
 		ret = -EILSEQ;
 		goto out;
 	}
 
-	wl->nvs_len = fw->size;
-	wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+	wl->nvs = kmalloc(sizeof(struct wl1271_nvs_file), GFP_KERNEL);
 
 	if (!wl->nvs) {
 		wl1271_error("could not allocate memory for the nvs file");
@@ -583,7 +494,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 		goto out;
 	}
 
-	memcpy(wl->nvs, fw->data, wl->nvs_len);
+	memcpy(wl->nvs, fw->data, sizeof(struct wl1271_nvs_file));
 
 	ret = 0;
 
-- 
cgit v1.2.3


From 7b21b6f8216494ab6b8b4dc9d15e48051a0f0a66 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:43 +0200
Subject: wl1271: Retrieve device mac address from the nvs file

Instead of always randomizing the MAC address, retrieve and configure the
MAC address from the device specific nvs file. For now, randomize an address
only if the address in the NVS is zero.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_boot.c |  8 -------
 drivers/net/wireless/wl12xx/wl1271_main.c | 36 +++++++++++++++++++++++--------
 2 files changed, 27 insertions(+), 17 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index bc3fe0275cac..57ba78d83e87 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -228,14 +228,6 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	nvs_len = sizeof(wl->nvs->nvs);
 	nvs_ptr = (u8 *)wl->nvs->nvs;
 
-	/* Update the device MAC address into the nvs */
-	nvs_ptr[11] = wl->mac_addr[0];
-	nvs_ptr[10] = wl->mac_addr[1];
-	nvs_ptr[6] = wl->mac_addr[2];
-	nvs_ptr[5] = wl->mac_addr[3];
-	nvs_ptr[4] = wl->mac_addr[4];
-	nvs_ptr[3] = wl->mac_addr[5];
-
 	/*
 	 * Layout before the actual NVS tables:
 	 * 1 byte : burst length.
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 282c2bbfec86..b5d53a3fcc5d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -467,6 +467,32 @@ out:
 	return ret;
 }
 
+static int wl1271_update_mac_addr(struct wl1271 *wl)
+{
+	int ret = 0;
+	u8 *nvs_ptr = (u8 *)wl->nvs->nvs;
+
+	/* get mac address from the NVS */
+	wl->mac_addr[0] = nvs_ptr[11];
+	wl->mac_addr[1] = nvs_ptr[10];
+	wl->mac_addr[2] = nvs_ptr[6];
+	wl->mac_addr[3] = nvs_ptr[5];
+	wl->mac_addr[4] = nvs_ptr[4];
+	wl->mac_addr[5] = nvs_ptr[3];
+
+	/* FIXME: if it is a zero-address, we should bail out. Now, instead,
+	   we randomize an address */
+	if (is_zero_ether_addr(wl->mac_addr)) {
+		static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+		memcpy(wl->mac_addr, nokia_oui, 3);
+		get_random_bytes(wl->mac_addr + 3, 3);
+	}
+
+	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+	return ret;
+}
+
 static int wl1271_fetch_nvs(struct wl1271 *wl)
 {
 	const struct firmware *fw;
@@ -496,7 +522,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 
 	memcpy(wl->nvs, fw->data, sizeof(struct wl1271_nvs_file));
 
-	ret = 0;
+	ret = wl1271_update_mac_addr(wl);
 
 out:
 	release_firmware(fw);
@@ -1893,7 +1919,6 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	struct ieee80211_hw *hw;
 	struct wl1271 *wl;
 	int ret, i;
-	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
 
 	pdata = spi->dev.platform_data;
 	if (!pdata) {
@@ -1938,13 +1963,6 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 
 	spin_lock_init(&wl->wl_lock);
 
-	/*
-	 * In case our MAC address is not correctly set,
-	 * we use a random but Nokia MAC.
-	 */
-	memcpy(wl->mac_addr, nokia_oui, 3);
-	get_random_bytes(wl->mac_addr + 3, 3);
-
 	wl->state = WL1271_STATE_OFF;
 	mutex_init(&wl->mutex);
 
-- 
cgit v1.2.3


From 12419cce88fa591a846a542d35cff43b69d9e271 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Thu, 18 Feb 2010 13:25:44 +0200
Subject: wl1271: add most of the normal initialization commands to PLT mode

We need to configure PLT mode almost in the same way as normal mode.  Most of
the configuration functions need to be called also when entering PLT, with
the exception of a few RX and TX configuration (which cause mac80211 warnings
if enable while runnning PLT tests).

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_init.c |  8 +--
 drivers/net/wireless/wl12xx/wl1271_init.h |  4 ++
 drivers/net/wireless/wl12xx/wl1271_main.c | 85 ++++++++++++++++++++++++++++---
 3 files changed, 86 insertions(+), 11 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 78403daab949..86c30a86a456 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -49,7 +49,7 @@ static int wl1271_init_hwenc_config(struct wl1271 *wl)
 	return 0;
 }
 
-static int wl1271_init_templates_config(struct wl1271 *wl)
+int wl1271_init_templates_config(struct wl1271 *wl)
 {
 	int ret;
 
@@ -113,7 +113,7 @@ static int wl1271_init_rx_config(struct wl1271 *wl, u32 config, u32 filter)
 	return 0;
 }
 
-static int wl1271_init_phy_config(struct wl1271 *wl)
+int wl1271_init_phy_config(struct wl1271 *wl)
 {
 	int ret;
 
@@ -156,7 +156,7 @@ static int wl1271_init_beacon_filter(struct wl1271 *wl)
 	return 0;
 }
 
-static int wl1271_init_pta(struct wl1271 *wl)
+int wl1271_init_pta(struct wl1271 *wl)
 {
 	int ret;
 
@@ -171,7 +171,7 @@ static int wl1271_init_pta(struct wl1271 *wl)
 	return 0;
 }
 
-static int wl1271_init_energy_detection(struct wl1271 *wl)
+int wl1271_init_energy_detection(struct wl1271 *wl)
 {
 	int ret;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/wl1271_init.h
index 930677fbe852..bc26f8c53b91 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.h
+++ b/drivers/net/wireless/wl12xx/wl1271_init.h
@@ -27,6 +27,10 @@
 #include "wl1271.h"
 
 int wl1271_hw_init_power_auth(struct wl1271 *wl);
+int wl1271_init_templates_config(struct wl1271 *wl);
+int wl1271_init_phy_config(struct wl1271 *wl);
+int wl1271_init_pta(struct wl1271 *wl);
+int wl1271_init_energy_detection(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b5d53a3fcc5d..e698dec40511 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -265,7 +265,9 @@ static void wl1271_conf_init(struct wl1271 *wl)
 
 static int wl1271_plt_init(struct wl1271 *wl)
 {
-	int ret;
+	struct conf_tx_ac_category *conf_ac;
+	struct conf_tx_tid *conf_tid;
+	int ret, i;
 
 	ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0)
@@ -275,15 +277,89 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	ret = wl1271_init_templates_config(wl);
+	if (ret < 0)
+		return ret;
+
 	ret = wl1271_acx_init_mem_config(wl);
 	if (ret < 0)
 		return ret;
 
+	/* PHY layer config */
+	ret = wl1271_init_phy_config(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	ret = wl1271_acx_dco_itrim_params(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* Initialize connection monitoring thresholds */
+	ret = wl1271_acx_conn_monit_params(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* Bluetooth WLAN coexistence */
+	ret = wl1271_init_pta(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* Energy detection */
+	ret = wl1271_init_energy_detection(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* Default fragmentation threshold */
+	ret = wl1271_acx_frag_threshold(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* Default TID configuration */
+	for (i = 0; i < wl->conf.tx.tid_conf_count; i++) {
+		conf_tid = &wl->conf.tx.tid_conf[i];
+		ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id,
+					 conf_tid->channel_type,
+					 conf_tid->tsid,
+					 conf_tid->ps_scheme,
+					 conf_tid->ack_policy,
+					 conf_tid->apsd_conf[0],
+					 conf_tid->apsd_conf[1]);
+		if (ret < 0)
+			goto out_free_memmap;
+	}
+
+	/* Default AC configuration */
+	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+		conf_ac = &wl->conf.tx.ac_conf[i];
+		ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min,
+					conf_ac->cw_max, conf_ac->aifsn,
+					conf_ac->tx_op_limit);
+		if (ret < 0)
+			goto out_free_memmap;
+	}
+
+	/* Enable data path */
 	ret = wl1271_cmd_data_path(wl, 1);
 	if (ret < 0)
-		return ret;
+		goto out_free_memmap;
+
+	/* Configure for CAM power saving (ie. always active) */
+	ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* configure PM */
+	ret = wl1271_acx_pm_config(wl);
+	if (ret < 0)
+		goto out_free_memmap;
 
 	return 0;
+
+ out_free_memmap:
+	kfree(wl->target_mem_map);
+	wl->target_mem_map = NULL;
+
+	return ret;
 }
 
 static void wl1271_disable_interrupts(struct wl1271 *wl)
@@ -653,11 +729,6 @@ int wl1271_plt_start(struct wl1271 *wl)
 		if (ret < 0)
 			goto irq_disable;
 
-		/* Make sure power saving is disabled */
-		ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
-		if (ret < 0)
-			goto irq_disable;
-
 		wl->state = WL1271_STATE_PLT;
 		wl1271_notice("firmware booted in PLT mode (%s)",
 			      wl->chip.fw_ver);
-- 
cgit v1.2.3


From 6f8434a754894f5743efc281fda3925ecac258b9 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@nokia.com>
Date: Thu, 18 Feb 2010 13:25:45 +0200
Subject: wl1271: skip 3 unused bytes from the NVS

Our NVS uploading mechanism had a bug that was causing it to pass three extra
zeros at the start of the NVS.  This may be a problem in the NVS generation
application, but for now we fix it in the driver.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_boot.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 57ba78d83e87..fb3090c3ed15 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -277,9 +277,14 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	/* Copy the NVS tables to a new block to ensure alignment */
-	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
-	if (!nvs_aligned)
-		return -ENOMEM;
+	/* FIXME: We jump 3 more bytes before uploading the NVS.  It seems
+	that our NVS files have three extra zeros here.  I'm not sure whether
+	the problem is in our NVS generation or we should really jumpt these
+	3 bytes here */
+	nvs_ptr += 3;
+
+	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); if
+	(!nvs_aligned) return -ENOMEM;
 
 	/* And finally we upload the NVS tables */
 	/* FIXME: In wl1271, we upload everything at once.
-- 
cgit v1.2.3


From e2e77b5ffb14211306ee093f01230f6ec69fab30 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:46 +0200
Subject: wl1271: Fix random MAC address setting

If reverting to a random MAC address, the driver would not update it to the
NVS file, and hence the firmware frame filtering would not work properly.

So update the randomized MAC address to the NVS image.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index e698dec40511..c7f5191e7dbf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -562,6 +562,14 @@ static int wl1271_update_mac_addr(struct wl1271 *wl)
 		static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
 		memcpy(wl->mac_addr, nokia_oui, 3);
 		get_random_bytes(wl->mac_addr + 3, 3);
+
+		/* update this address to the NVS */
+		nvs_ptr[11] = wl->mac_addr[0];
+		nvs_ptr[10] = wl->mac_addr[1];
+		nvs_ptr[6] = wl->mac_addr[2];
+		nvs_ptr[5] = wl->mac_addr[3];
+		nvs_ptr[4] = wl->mac_addr[4];
+		nvs_ptr[3] = wl->mac_addr[5];
 	}
 
 	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
-- 
cgit v1.2.3


From c82c1dde3024715c4cd8b6dd8cc7c75d8d7d93c8 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Feb 2010 13:25:47 +0200
Subject: wl1271: wakeup chip in op_conf_tx()

elp_wakeup() was missing in op_conf_tx() which caused wakeup problems in
power save. I forgot to add this part when porting the patch from wl1251.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index c7f5191e7dbf..9de7df76f53b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1738,11 +1738,15 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
 
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
 	ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
 				params->cw_min, params->cw_max,
 				params->aifs, params->txop);
 	if (ret < 0)
-		goto out;
+		goto out_sleep;
 
 	ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
 				 CONF_CHANNEL_TYPE_EDCF,
@@ -1750,7 +1754,10 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 				 CONF_PS_SCHEME_LEGACY_PSPOLL,
 				 CONF_ACK_POLICY_LEGACY, 0, 0);
 	if (ret < 0)
-		goto out;
+		goto out_sleep;
+
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
 
 out:
 	mutex_unlock(&wl->mutex);
-- 
cgit v1.2.3


From 6c71b0ea761da416af54df4f72f48e71050cc012 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:48 +0200
Subject: wl1271: Optimized RX path packet retrieval

Instead of acking RX packets read from the FW once all (of several possible)
buffered packets are retrieved, ack packets one by one as they are read. This
enables the FW to start receiving more packets from the network while the
host read operation is still ongoing.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_rx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index ca645f38109b..e8eee883848f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -218,7 +218,7 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
 
 		wl->rx_counter++;
 		drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+		wl1271_spi_write32(wl, RX_DRIVER_COUNTER_ADDRESS,
+				   wl->rx_counter);
 	}
-
-	wl1271_spi_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
 }
-- 
cgit v1.2.3


From fddc7dd7deaa400db314b214d92de95f865a8af0 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:49 +0200
Subject: wl1271: Fix key-remove error

The new firmware does not allow removal of unicast keys - they will be
automatically removed on the next CMD_JOIN.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 9de7df76f53b..4a0a15bcd67e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1478,6 +1478,13 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 
 	case DISABLE_KEY:
+		/* The wl1271 does not allow to remove unicast keys - they
+		   will be cleared automatically on next CMD_JOIN. Ignore the
+		   request silently, as we dont want the mac80211 to emit
+		   an error message. */
+		if (!is_broadcast_ether_addr(addr))
+			break;
+
 		ret = wl1271_cmd_set_key(wl, KEY_REMOVE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-- 
cgit v1.2.3


From ee444cf0501183df1640cd35bebd4250989bfe99 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:50 +0200
Subject: wl1271: Fix WEP key handling

WEP key index handling was broken: the default key when using key 0 was never
specified to the FW, and if using other default than 0, it would be set on the
TX path for every single TX'd frame.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 8 ++++++++
 drivers/net/wireless/wl12xx/wl1271_tx.c   | 1 +
 2 files changed, 9 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 4a0a15bcd67e..459d9a0931f4 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1475,6 +1475,14 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 			wl1271_error("Could not add or replace key");
 			goto out_sleep;
 		}
+
+		/* the default WEP key needs to be configured at least once */
+		if (key_type == KEY_WEP) {
+			ret = wl1271_cmd_set_default_wep_key(wl,
+							     wl->default_key);
+			if (ret < 0)
+				goto out_sleep;
+		}
 		break;
 
 	case DISABLE_KEY:
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index f6815a9239e5..f9e06385d9fe 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -203,6 +203,7 @@ static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
 			ret = wl1271_cmd_set_default_wep_key(wl, idx);
 			if (ret < 0)
 				return ret;
+			wl->default_key = idx;
 		}
 	}
 
-- 
cgit v1.2.3


From 8bf29b0eb3ba38c8cf55e60976f124672cda7ab2 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:51 +0200
Subject: wl1271: Fix ad-hoc SSID update

If re-configuring the SSID while ad-hoc was already enabled, the beacon
template would be properly updated, but the SSID passed in the CMD_JOIN would
not - hence filtering etc would not work properly.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 459d9a0931f4..fb1e6a8088d8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of wl1271
  *
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  *
@@ -1604,6 +1604,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	enum wl1271_cmd_ps_mode mode;
 	struct wl1271 *wl = hw->priv;
+	bool do_join = false;
 	int ret;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed");
@@ -1646,6 +1647,9 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			dev_kfree_skb(beacon);
 			if (ret < 0)
 				goto out_sleep;
+
+			/* Need to update the SSID (for filtering etc) */
+			do_join = true;
 		}
 	}
 
@@ -1664,12 +1668,8 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				goto out_sleep;
 			}
 
-			ret = wl1271_cmd_join(wl);
-			if (ret < 0) {
-				wl1271_warning("cmd join failed %d", ret);
-				goto out_sleep;
-			}
-			set_bit(WL1271_FLAG_JOINED, &wl->flags);
+			/* Need to update the BSSID (for filtering etc) */
+			do_join = true;
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
@@ -1736,6 +1736,15 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	if (do_join) {
+		ret = wl1271_cmd_join(wl);
+		if (ret < 0) {
+			wl1271_warning("cmd join failed %d", ret);
+			goto out_sleep;
+		}
+		set_bit(WL1271_FLAG_JOINED, &wl->flags);
+	}
+
 out_sleep:
 	wl1271_ps_elp_sleep(wl);
 
-- 
cgit v1.2.3


From 1937e742639c03a6fe77239c3003ce9602302117 Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Thu, 18 Feb 2010 13:25:52 +0200
Subject: wl1271: Fix beacon filter table configuration

The beacon filter table configuration ACX structure had certain elements
reversed, resulting in firmware instability in regard of the feature. Fix
the structure.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_acx.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index ac94a13ea747..aeccc98581eb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -2,7 +2,7 @@
  * This file is part of wl1271
  *
  * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  *
@@ -348,7 +348,7 @@ struct acx_beacon_filter_option {
  * ACXBeaconFilterEntry (not 221)
  * Byte Offset     Size (Bytes)    Definition
  * ===========     ============    ==========
- * 0				1               IE identifier
+ * 0               1               IE identifier
  * 1               1               Treatment bit mask
  *
  * ACXBeaconFilterEntry (221)
@@ -381,8 +381,8 @@ struct acx_beacon_filter_ie_table {
 	struct acx_header header;
 
 	u8 num_ie;
-	u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
 	u8 pad[3];
+	u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
 } __attribute__ ((packed));
 
 struct acx_conn_monit_params {
-- 
cgit v1.2.3


From c8c90873520ef4c201cfd03b4892ca8bbf551e2e Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 18 Feb 2010 13:25:53 +0200
Subject: wl1271: add testmode support

Testmode will be used to send PLT (Production Line Testing) commands
from user space.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/Makefile          |   1 +
 drivers/net/wireless/wl12xx/wl1271.h          |   2 +-
 drivers/net/wireless/wl12xx/wl1271_main.c     |   2 +
 drivers/net/wireless/wl12xx/wl1271_testmode.c | 283 ++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_testmode.h |  31 +++
 5 files changed, 318 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/wl12xx/wl1271_testmode.c
 create mode 100644 drivers/net/wireless/wl12xx/wl1271_testmode.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
index 62e37ad01cc0..d089b5d6a513 100644
--- a/drivers/net/wireless/wl12xx/Makefile
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -11,4 +11,5 @@ wl1271-objs		= wl1271_main.o  wl1271_spi.o wl1271_cmd.o  \
 			  wl1271_event.o wl1271_tx.o  wl1271_rx.o   \
 			  wl1271_ps.o    wl1271_acx.o wl1271_boot.o \
 			  wl1271_init.o  wl1271_debugfs.o
+wl1271-$(CONFIG_NL80211_TESTMODE)	+= wl1271_testmode.o
 obj-$(CONFIG_WL1271)	+= wl1271.o
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index b3a3402593dd..97ea5096bc8c 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -43,7 +43,7 @@ enum {
 	DEBUG_SPI	= BIT(1),
 	DEBUG_BOOT	= BIT(2),
 	DEBUG_MAILBOX	= BIT(3),
-	DEBUG_NETLINK	= BIT(4),
+	DEBUG_TESTMODE	= BIT(4),
 	DEBUG_EVENT	= BIT(5),
 	DEBUG_TX	= BIT(6),
 	DEBUG_RX	= BIT(7),
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index fb1e6a8088d8..aa8f79c4c98a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -46,6 +46,7 @@
 #include "wl1271_debugfs.h"
 #include "wl1271_cmd.h"
 #include "wl1271_boot.h"
+#include "wl1271_testmode.h"
 
 #define WL1271_BOOT_RETRIES 3
 
@@ -1955,6 +1956,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.bss_info_changed = wl1271_op_bss_info_changed,
 	.set_rts_threshold = wl1271_op_set_rts_threshold,
 	.conf_tx = wl1271_op_conf_tx,
+	CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
 };
 
 static int wl1271_register_hw(struct wl1271 *wl)
diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.c b/drivers/net/wireless/wl12xx/wl1271_testmode.c
new file mode 100644
index 000000000000..3919102e942e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_testmode.c
@@ -0,0 +1,283 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#include "wl1271_testmode.h"
+
+#include <net/genetlink.h>
+
+#include "wl1271.h"
+#include "wl1271_spi.h"
+#include "wl1271_acx.h"
+
+#define WL1271_TM_MAX_DATA_LENGTH 1024
+
+enum wl1271_tm_commands {
+	WL1271_TM_CMD_UNSPEC,
+	WL1271_TM_CMD_TEST,
+	WL1271_TM_CMD_INTERROGATE,
+	WL1271_TM_CMD_CONFIGURE,
+	WL1271_TM_CMD_NVS_PUSH,
+	WL1271_TM_CMD_SET_PLT_MODE,
+
+	__WL1271_TM_CMD_AFTER_LAST
+};
+#define WL1271_TM_CMD_MAX (__WL1271_TM_CMD_AFTER_LAST - 1)
+
+enum wl1271_tm_attrs {
+	WL1271_TM_ATTR_UNSPEC,
+	WL1271_TM_ATTR_CMD_ID,
+	WL1271_TM_ATTR_ANSWER,
+	WL1271_TM_ATTR_DATA,
+	WL1271_TM_ATTR_IE_ID,
+	WL1271_TM_ATTR_PLT_MODE,
+
+	__WL1271_TM_ATTR_AFTER_LAST
+};
+#define WL1271_TM_ATTR_MAX (__WL1271_TM_ATTR_AFTER_LAST - 1)
+
+static struct nla_policy wl1271_tm_policy[WL1271_TM_ATTR_MAX + 1] = {
+	[WL1271_TM_ATTR_CMD_ID] =	{ .type = NLA_U32 },
+	[WL1271_TM_ATTR_ANSWER] =	{ .type = NLA_U8 },
+	[WL1271_TM_ATTR_DATA] =		{ .type = NLA_BINARY,
+					  .len = WL1271_TM_MAX_DATA_LENGTH },
+	[WL1271_TM_ATTR_IE_ID] =	{ .type = NLA_U32 },
+	[WL1271_TM_ATTR_PLT_MODE] =	{ .type = NLA_U32 },
+};
+
+
+static int wl1271_tm_cmd_test(struct wl1271 *wl, struct nlattr *tb[])
+{
+	int buf_len, ret, len;
+	struct sk_buff *skb;
+	void *buf;
+	u8 answer = 0;
+
+	wl1271_debug(DEBUG_TESTMODE, "testmode cmd test");
+
+	if (!tb[WL1271_TM_ATTR_DATA])
+		return -EINVAL;
+
+	buf = nla_data(tb[WL1271_TM_ATTR_DATA]);
+	buf_len = nla_len(tb[WL1271_TM_ATTR_DATA]);
+
+	if (tb[WL1271_TM_ATTR_ANSWER])
+		answer = nla_get_u8(tb[WL1271_TM_ATTR_ANSWER]);
+
+	if (buf_len > sizeof(struct wl1271_command))
+		return -EMSGSIZE;
+
+	mutex_lock(&wl->mutex);
+	ret = wl1271_cmd_test(wl, buf, buf_len, answer);
+	mutex_unlock(&wl->mutex);
+
+	if (ret < 0) {
+		wl1271_warning("testmode cmd test failed: %d", ret);
+		return ret;
+	}
+
+	if (answer) {
+		len = nla_total_size(buf_len);
+		skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, len);
+		if (!skb)
+			return -ENOMEM;
+
+		NLA_PUT(skb, WL1271_TM_ATTR_DATA, buf_len, buf);
+		ret = cfg80211_testmode_reply(skb);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+
+nla_put_failure:
+	kfree_skb(skb);
+	return -EMSGSIZE;
+}
+
+static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[])
+{
+	int ret;
+	struct wl1271_command *cmd;
+	struct sk_buff *skb;
+	u8 ie_id;
+
+	wl1271_debug(DEBUG_TESTMODE, "testmode cmd interrogate");
+
+	if (!tb[WL1271_TM_ATTR_IE_ID])
+		return -EINVAL;
+
+	ie_id = nla_get_u8(tb[WL1271_TM_ATTR_IE_ID]);
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	mutex_lock(&wl->mutex);
+	ret = wl1271_cmd_interrogate(wl, ie_id, cmd, sizeof(*cmd));
+	mutex_unlock(&wl->mutex);
+
+	if (ret < 0) {
+		wl1271_warning("testmode cmd interrogate failed: %d", ret);
+		return ret;
+	}
+
+	skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd);
+
+	return 0;
+
+nla_put_failure:
+	kfree_skb(skb);
+	return -EMSGSIZE;
+}
+
+static int wl1271_tm_cmd_configure(struct wl1271 *wl, struct nlattr *tb[])
+{
+	int buf_len, ret;
+	void *buf;
+	u8 ie_id;
+
+	wl1271_debug(DEBUG_TESTMODE, "testmode cmd configure");
+
+	if (!tb[WL1271_TM_ATTR_DATA])
+		return -EINVAL;
+	if (!tb[WL1271_TM_ATTR_IE_ID])
+		return -EINVAL;
+
+	ie_id = nla_get_u8(tb[WL1271_TM_ATTR_IE_ID]);
+	buf = nla_data(tb[WL1271_TM_ATTR_DATA]);
+	buf_len = nla_len(tb[WL1271_TM_ATTR_DATA]);
+
+	if (buf_len > sizeof(struct wl1271_command))
+		return -EMSGSIZE;
+
+	mutex_lock(&wl->mutex);
+	ret = wl1271_cmd_configure(wl, ie_id, buf, buf_len);
+	mutex_unlock(&wl->mutex);
+
+	if (ret < 0) {
+		wl1271_warning("testmode cmd configure failed: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
+{
+	int ret = 0;
+	size_t len;
+	void *buf;
+
+	wl1271_debug(DEBUG_TESTMODE, "testmode cmd nvs push");
+
+	if (!tb[WL1271_TM_ATTR_DATA])
+		return -EINVAL;
+
+	buf = nla_data(tb[WL1271_TM_ATTR_DATA]);
+	len = nla_len(tb[WL1271_TM_ATTR_DATA]);
+
+	if (len != sizeof(struct wl1271_nvs_file)) {
+		wl1271_error("nvs size is not as expected: %zu != %zu",
+			     len, sizeof(struct wl1271_nvs_file));
+		return -EMSGSIZE;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	kfree(wl->nvs);
+
+	wl->nvs = kmalloc(sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+	if (!wl->nvs) {
+		wl1271_error("could not allocate memory for the nvs file");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->nvs, buf, len);
+
+	wl1271_debug(DEBUG_TESTMODE, "testmode pushed nvs");
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[])
+{
+	u32 val;
+	int ret;
+
+	wl1271_debug(DEBUG_TESTMODE, "testmode cmd set plt mode");
+
+	if (!tb[WL1271_TM_ATTR_PLT_MODE])
+		return -EINVAL;
+
+	val = nla_get_u32(tb[WL1271_TM_ATTR_PLT_MODE]);
+
+	switch (val) {
+	case 0:
+		ret = wl1271_plt_stop(wl);
+		break;
+	case 1:
+		ret = wl1271_plt_start(wl);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+	struct wl1271 *wl = hw->priv;
+	struct nlattr *tb[WL1271_TM_ATTR_MAX + 1];
+	int err;
+
+	err = nla_parse(tb, WL1271_TM_ATTR_MAX, data, len, wl1271_tm_policy);
+	if (err)
+		return err;
+
+	if (!tb[WL1271_TM_ATTR_CMD_ID])
+		return -EINVAL;
+
+	switch (nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID])) {
+	case WL1271_TM_CMD_TEST:
+		return wl1271_tm_cmd_test(wl, tb);
+	case WL1271_TM_CMD_INTERROGATE:
+		return wl1271_tm_cmd_interrogate(wl, tb);
+	case WL1271_TM_CMD_CONFIGURE:
+		return wl1271_tm_cmd_configure(wl, tb);
+	case WL1271_TM_CMD_NVS_PUSH:
+		return wl1271_tm_cmd_nvs_push(wl, tb);
+	case WL1271_TM_CMD_SET_PLT_MODE:
+		return wl1271_tm_cmd_set_plt_mode(wl, tb);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.h b/drivers/net/wireless/wl12xx/wl1271_testmode.h
new file mode 100644
index 000000000000..c196d28f9d9d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_testmode.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_TESTMODE_H__
+#define __WL1271_TESTMODE_H__
+
+#include <net/mac80211.h>
+
+int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len);
+
+#endif /* __WL1271_TESTMODE_H__ */
-- 
cgit v1.2.3


From 521a5b2137cc15430e3b1ea4c148663d1dbe077f Mon Sep 17 00:00:00 2001
From: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Date: Thu, 18 Feb 2010 13:25:54 +0200
Subject: wl1271: Moved common IO functions from wl271_spi.c to wl1271_io.c

In prepraration for integration of SDIO implementation moved some IO
functions common for SPI and SDIO to separate file.

Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/Makefile     |   3 +-
 drivers/net/wireless/wl12xx/wl1271_io.c  | 203 +++++++++++++++++++++++++++++++
 drivers/net/wireless/wl12xx/wl1271_io.h  |  37 ++++++
 drivers/net/wireless/wl12xx/wl1271_spi.c | 157 ------------------------
 4 files changed, 242 insertions(+), 158 deletions(-)
 create mode 100644 drivers/net/wireless/wl12xx/wl1271_io.c
 create mode 100644 drivers/net/wireless/wl12xx/wl1271_io.h

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
index d089b5d6a513..f47ec94c16dc 100644
--- a/drivers/net/wireless/wl12xx/Makefile
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_WL1251_SDIO)	+= wl1251_sdio.o
 wl1271-objs		= wl1271_main.o  wl1271_spi.o wl1271_cmd.o  \
 			  wl1271_event.o wl1271_tx.o  wl1271_rx.o   \
 			  wl1271_ps.o    wl1271_acx.o wl1271_boot.o \
-			  wl1271_init.o  wl1271_debugfs.o
+			  wl1271_init.o  wl1271_debugfs.o wl1271_io.o
+
 wl1271-$(CONFIG_NL80211_TESTMODE)	+= wl1271_testmode.o
 obj-$(CONFIG_WL1271)	+= wl1271.o
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.c b/drivers/net/wireless/wl12xx/wl1271_io.c
new file mode 100644
index 000000000000..dcb588b4670d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_io.c
@@ -0,0 +1,203 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl1271.h"
+#include "wl12xx_80211.h"
+#include "wl1271_spi.h"
+#include "wl1271_io.h"
+
+static int wl1271_translate_addr(struct wl1271 *wl, int addr)
+{
+	/*
+	 * To translate, first check to which window of addresses the
+	 * particular address belongs. Then subtract the starting address
+	 * of that window from the address. Then, add offset of the
+	 * translated region.
+	 *
+	 * The translated regions occur next to each other in physical device
+	 * memory, so just add the sizes of the preceeding address regions to
+	 * get the offset to the new region.
+	 *
+	 * Currently, only the two first regions are addressed, and the
+	 * assumption is that all addresses will fall into either of those
+	 * two.
+	 */
+	if ((addr >= wl->part.reg.start) &&
+	    (addr < wl->part.reg.start + wl->part.reg.size))
+		return addr - wl->part.reg.start + wl->part.mem.size;
+	else
+		return addr - wl->part.mem.start;
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * To simplify driver code, a fixed (virtual) memory map is defined for
+ * register and memory addresses. Because in the chipset, in different stages
+ * of operation, those addresses will move around, an address translation
+ * mechanism is required.
+ *
+ * There are four partitions (three memory and one register partition),
+ * which are mapped to two different areas of the hardware memory.
+ *
+ *                                Virtual address
+ *                                     space
+ *
+ *                                    |    |
+ *                                 ...+----+--> mem.start
+ *          Physical address    ...   |    |
+ *               space       ...      |    | [PART_0]
+ *                        ...         |    |
+ *  00000000  <--+----+...         ...+----+--> mem.start + mem.size
+ *               |    |         ...   |    |
+ *               |MEM |      ...      |    |
+ *               |    |   ...         |    |
+ *  mem.size  <--+----+...            |    | {unused area)
+ *               |    |   ...         |    |
+ *               |REG |      ...      |    |
+ *  mem.size     |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg.start
+ *  reg.size     |    |   ...         |    |
+ *               |MEM2|      ...      |    | [PART_1]
+ *               |    |         ...   |    |
+ *                                 ...+----+--> reg.start + reg.size
+ *                                    |    |
+ *
+ */
+int wl1271_set_partition(struct wl1271 *wl,
+			 struct wl1271_partition_set *p)
+{
+	/* copy partition info */
+	memcpy(&wl->part, p, sizeof(*p));
+
+	wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+		     p->mem.start, p->mem.size);
+	wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+		     p->reg.start, p->reg.size);
+	wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
+		     p->mem2.start, p->mem2.size);
+	wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
+		     p->mem3.start, p->mem3.size);
+
+	/* write partition info to the chipset */
+	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
+
+	return 0;
+}
+
+void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
+		      size_t len, bool fixed)
+{
+	wl1271_spi_raw_write(wl, addr, buf, len, fixed);
+}
+
+void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
+		     size_t len, bool fixed)
+{
+	wl1271_spi_read(wl, addr, buf, len, fixed);
+}
+
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed)
+{
+	int physical;
+
+	physical = wl1271_translate_addr(wl, addr);
+
+	wl1271_spi_raw_read(wl, physical, buf, len, fixed);
+}
+
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		      bool fixed)
+{
+	int physical;
+
+	physical = wl1271_translate_addr(wl, addr);
+
+	wl1271_spi_raw_write(wl, physical, buf, len, fixed);
+}
+
+u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
+{
+	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
+}
+
+void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
+{
+	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
+}
+
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+{
+	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
+	addr = (addr >> 1) + 0x30000;
+	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+
+	/* write value to OCP_POR_WDATA */
+	wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
+
+	/* write 1 to OCP_CMD */
+	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+}
+
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
+{
+	u32 val;
+	int timeout = OCP_CMD_LOOP;
+
+	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
+	addr = (addr >> 1) + 0x30000;
+	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+
+	/* write 2 to OCP_CMD */
+	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
+
+	/* poll for data ready */
+	do {
+		val = wl1271_spi_read32(wl, OCP_DATA_READ);
+	} while (!(val & OCP_READY_MASK) && --timeout);
+
+	if (!timeout) {
+		wl1271_warning("Top register access timed out.");
+		return 0xffff;
+	}
+
+	/* check data status and return if OK */
+	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
+		return val & 0xffff;
+	else {
+		wl1271_warning("Top register access returned error.");
+		return 0xffff;
+	}
+}
+
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/wl1271_io.h
new file mode 100644
index 000000000000..2dc6abbe4dd5
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_io.h
@@ -0,0 +1,37 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_IO_H__
+#define __WL1271_IO_H__
+
+struct wl1271;
+
+
+/* Raw target IO, address is not translated */
+void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
+		      size_t len, bool fixed);
+void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
+		     size_t len, bool fixed);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index ee9564aa6ecc..67a82934f36e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -30,28 +30,6 @@
 #include "wl12xx_80211.h"
 #include "wl1271_spi.h"
 
-static int wl1271_translate_addr(struct wl1271 *wl, int addr)
-{
-	/*
-	 * To translate, first check to which window of addresses the
-	 * particular address belongs. Then subtract the starting address
-	 * of that window from the address. Then, add offset of the
-	 * translated region.
-	 *
-	 * The translated regions occur next to each other in physical device
-	 * memory, so just add the sizes of the preceeding address regions to
-	 * get the offset to the new region.
-	 *
-	 * Currently, only the two first regions are addressed, and the
-	 * assumption is that all addresses will fall into either of those
-	 * two.
-	 */
-	if ((addr >= wl->part.reg.start) &&
-	    (addr < wl->part.reg.start + wl->part.reg.size))
-		return addr - wl->part.reg.start + wl->part.mem.size;
-	else
-		return addr - wl->part.mem.start;
-}
 
 void wl1271_spi_reset(struct wl1271 *wl)
 {
@@ -133,67 +111,6 @@ void wl1271_spi_init(struct wl1271 *wl)
 	wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
 }
 
-/* Set the SPI partitions to access the chip addresses
- *
- * To simplify driver code, a fixed (virtual) memory map is defined for
- * register and memory addresses. Because in the chipset, in different stages
- * of operation, those addresses will move around, an address translation
- * mechanism is required.
- *
- * There are four partitions (three memory and one register partition),
- * which are mapped to two different areas of the hardware memory.
- *
- *                                Virtual address
- *                                     space
- *
- *                                    |    |
- *                                 ...+----+--> mem.start
- *          Physical address    ...   |    |
- *               space       ...      |    | [PART_0]
- *                        ...         |    |
- *  00000000  <--+----+...         ...+----+--> mem.start + mem.size
- *               |    |         ...   |    |
- *               |MEM |      ...      |    |
- *               |    |   ...         |    |
- *  mem.size  <--+----+...            |    | {unused area)
- *               |    |   ...         |    |
- *               |REG |      ...      |    |
- *  mem.size     |    |         ...   |    |
- *      +     <--+----+...         ...+----+--> reg.start
- *  reg.size     |    |   ...         |    |
- *               |MEM2|      ...      |    | [PART_1]
- *               |    |         ...   |    |
- *                                 ...+----+--> reg.start + reg.size
- *                                    |    |
- *
- */
-int wl1271_set_partition(struct wl1271 *wl,
-			 struct wl1271_partition_set *p)
-{
-	/* copy partition info */
-	memcpy(&wl->part, p, sizeof(*p));
-
-	wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-		     p->mem.start, p->mem.size);
-	wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-		     p->reg.start, p->reg.size);
-	wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
-		     p->mem2.start, p->mem2.size);
-	wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
-		     p->mem3.start, p->mem3.size);
-
-	/* write partition info to the chipset */
-	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
-	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
-	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
-	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
-	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
-	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
-	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
-
-	return 0;
-}
-
 #define WL1271_BUSY_WORD_TIMEOUT 1000
 
 /* FIXME: Check busy words, removed due to SPI bug */
@@ -338,77 +255,3 @@ void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 	wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
 	wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
 }
-
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-		     bool fixed)
-{
-	int physical;
-
-	physical = wl1271_translate_addr(wl, addr);
-
-	wl1271_spi_raw_read(wl, physical, buf, len, fixed);
-}
-
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-		      bool fixed)
-{
-	int physical;
-
-	physical = wl1271_translate_addr(wl, addr);
-
-	wl1271_spi_raw_write(wl, physical, buf, len, fixed);
-}
-
-u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
-{
-	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
-}
-
-void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
-{
-	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
-}
-
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
-{
-	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
-	addr = (addr >> 1) + 0x30000;
-	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
-
-	/* write value to OCP_POR_WDATA */
-	wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
-
-	/* write 1 to OCP_CMD */
-	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
-}
-
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
-{
-	u32 val;
-	int timeout = OCP_CMD_LOOP;
-
-	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
-	addr = (addr >> 1) + 0x30000;
-	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
-
-	/* write 2 to OCP_CMD */
-	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
-
-	/* poll for data ready */
-	do {
-		val = wl1271_spi_read32(wl, OCP_DATA_READ);
-	} while (!(val & OCP_READY_MASK) && --timeout);
-
-	if (!timeout) {
-		wl1271_warning("Top register access timed out.");
-		return 0xffff;
-	}
-
-	/* check data status and return if OK */
-	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
-		return val & 0xffff;
-	else {
-		wl1271_warning("Top register access returned error.");
-		return 0xffff;
-	}
-}
-- 
cgit v1.2.3


From 7b048c52d7283ebf07c826a45c631a6ba225c057 Mon Sep 17 00:00:00 2001
From: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Date: Thu, 18 Feb 2010 13:25:55 +0200
Subject: wl1271: Renamed IO functions

In preparation for integration of SDIO implementation renamed some IO
functions from wl1271_spi_* form to wl1271_*.

Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_boot.c  | 70 +++++++++++++++---------------
 drivers/net/wireless/wl12xx/wl1271_cmd.c   | 15 ++++---
 drivers/net/wireless/wl12xx/wl1271_event.c |  9 ++--
 drivers/net/wireless/wl12xx/wl1271_io.c    | 24 +++++-----
 drivers/net/wireless/wl12xx/wl1271_io.h    | 29 +++++++++++++
 drivers/net/wireless/wl12xx/wl1271_main.c  | 12 ++---
 drivers/net/wireless/wl12xx/wl1271_ps.c    |  1 +
 drivers/net/wireless/wl12xx/wl1271_rx.c    | 11 +++--
 drivers/net/wireless/wl12xx/wl1271_spi.h   | 30 -------------
 drivers/net/wireless/wl12xx/wl1271_tx.c    | 17 ++++----
 10 files changed, 109 insertions(+), 109 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index fb3090c3ed15..2be76ee42bb9 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -27,6 +27,7 @@
 #include "wl1271_reg.h"
 #include "wl1271_boot.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 #include "wl1271_event.h"
 
 static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
@@ -93,19 +94,19 @@ static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
 	u32 cpu_ctrl;
 
 	/* 10.5.0 run the firmware (I) */
-	cpu_ctrl = wl1271_spi_read32(wl, ACX_REG_ECPU_CONTROL);
+	cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL);
 
 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
-	wl1271_spi_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+	wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
 }
 
 static void wl1271_boot_fw_version(struct wl1271 *wl)
 {
 	struct wl1271_static_data static_data;
 
-	wl1271_spi_read(wl, wl->cmd_box_addr,
-			&static_data, sizeof(static_data), false);
+	wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data),
+		    false);
 
 	strncpy(wl->chip.fw_ver, static_data.fw_version,
 		sizeof(wl->chip.fw_ver));
@@ -164,7 +165,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 		memcpy(chunk, p, CHUNK_SIZE);
 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
 			     p, addr);
-		wl1271_spi_write(wl, addr, chunk, CHUNK_SIZE, false);
+		wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);
 
 		chunk_num++;
 	}
@@ -175,7 +176,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
 		     fw_data_len % CHUNK_SIZE, p, addr);
-	wl1271_spi_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
+	wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
 
 	kfree(chunk);
 	return 0;
@@ -256,7 +257,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 			wl1271_debug(DEBUG_BOOT,
 				     "nvs burst write 0x%x: 0x%x",
 				     dest_addr, val);
-			wl1271_spi_write32(wl, dest_addr, val);
+			wl1271_write32(wl, dest_addr, val);
 
 			nvs_ptr += 4;
 			dest_addr += 4;
@@ -290,7 +291,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	/* FIXME: In wl1271, we upload everything at once.
 	   No endianness handling needed here?! The ref driver doesn't do
 	   anything about it at this point */
-	wl1271_spi_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
+	wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
 
 	kfree(nvs_aligned);
 	return 0;
@@ -299,9 +300,9 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
 {
 	enable_irq(wl->irq);
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
-			   WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
-	wl1271_spi_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+	wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
 }
 
 static int wl1271_boot_soft_reset(struct wl1271 *wl)
@@ -310,13 +311,12 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 	u32 boot_data;
 
 	/* perform soft reset */
-	wl1271_spi_write32(wl, ACX_REG_SLV_SOFT_RESET,
-			   ACX_SLV_SOFT_RESET_BIT);
+	wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
 
 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
 	while (1) {
-		boot_data = wl1271_spi_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET);
 		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
 		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
 			break;
@@ -332,10 +332,10 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 	}
 
 	/* disable Rx/Tx */
-	wl1271_spi_write32(wl, ENABLE, 0x0);
+	wl1271_write32(wl, ENABLE, 0x0);
 
 	/* disable auto calibration on start*/
-	wl1271_spi_write32(wl, SPARE_A2, 0xffff);
+	wl1271_write32(wl, SPARE_A2, 0xffff);
 
 	return 0;
 }
@@ -347,7 +347,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 
 	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
-	chip_id = wl1271_spi_read32(wl, CHIP_ID_B);
+	chip_id = wl1271_read32(wl, CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
@@ -360,8 +360,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		interrupt = wl1271_spi_read32(wl,
-					      ACX_REG_INTERRUPT_NO_CLEAR);
+		interrupt = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 
 		if (interrupt == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
@@ -370,8 +369,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) {
-			wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
-					   WL1271_ACX_INTR_INIT_COMPLETE);
+			wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
+				       WL1271_ACX_INTR_INIT_COMPLETE);
 			break;
 		}
 	}
@@ -383,10 +382,10 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	}
 
 	/* get hardware config command mail box */
-	wl->cmd_box_addr = wl1271_spi_read32(wl, REG_COMMAND_MAILBOX_PTR);
+	wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR);
 
 	/* get hardware config event mail box */
-	wl->event_box_addr = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
 
 	/* set the working partition to its "running" mode offset */
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -459,9 +458,9 @@ int wl1271_boot(struct wl1271 *wl)
 		wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
 	}
 
-	wl1271_spi_write32(wl, PLL_PARAMETERS, clk);
+	wl1271_write32(wl, PLL_PARAMETERS, clk);
 
-	pause = wl1271_spi_read32(wl, PLL_PARAMETERS);
+	pause = wl1271_read32(wl, PLL_PARAMETERS);
 
 	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
 
@@ -470,10 +469,10 @@ int wl1271_boot(struct wl1271 *wl)
 					   * 0x3ff (magic number ).  How does
 					   * this work?! */
 	pause |= WU_COUNTER_PAUSE_VAL;
-	wl1271_spi_write32(wl, WU_COUNTER_PAUSE, pause);
+	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
 
 	/* Continue the ELP wake up sequence */
-	wl1271_spi_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);
 
 	wl1271_set_partition(wl, &part_table[PART_DRPW]);
@@ -483,18 +482,18 @@ int wl1271_boot(struct wl1271 *wl)
 	   before taking DRPw out of reset */
 
 	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
-	clk = wl1271_spi_read32(wl, DRPW_SCRATCH_START);
+	clk = wl1271_read32(wl, DRPW_SCRATCH_START);
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
 	/* 2 */
 	clk |= (REF_CLOCK << 1) << 4;
-	wl1271_spi_write32(wl, DRPW_SCRATCH_START, clk);
+	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
 
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	/* Disable interrupts */
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 
 	ret = wl1271_boot_soft_reset(wl);
 	if (ret < 0)
@@ -509,23 +508,22 @@ int wl1271_boot(struct wl1271 *wl)
 	 * ACX_EEPROMLESS_IND_REG */
 	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
 
-	wl1271_spi_write32(wl, ACX_EEPROMLESS_IND_REG,
-			   ACX_EEPROMLESS_IND_REG);
+	wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
 
-	tmp = wl1271_spi_read32(wl, CHIP_ID_B);
+	tmp = wl1271_read32(wl, CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 
 	/* 6. read the EEPROM parameters */
-	tmp = wl1271_spi_read32(wl, SCR_PAD2);
+	tmp = wl1271_read32(wl, SCR_PAD2);
 
 	ret = wl1271_boot_write_irq_polarity(wl);
 	if (ret < 0)
 		goto out;
 
 	/* FIXME: Need to check whether this is really what we want */
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
-			   WL1271_ACX_ALL_EVENTS_VECTOR);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_ALL_EVENTS_VECTOR);
 
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 54b5124fc0c0..36a64e06f290 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -30,6 +30,7 @@
 #include "wl1271.h"
 #include "wl1271_reg.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 #include "wl1271_acx.h"
 #include "wl12xx_80211.h"
 #include "wl1271_cmd.h"
@@ -57,13 +58,13 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 
 	WARN_ON(len % 4 != 0);
 
-	wl1271_spi_write(wl, wl->cmd_box_addr, buf, len, false);
+	wl1271_write(wl, wl->cmd_box_addr, buf, len, false);
 
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
 
-	intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
@@ -73,13 +74,13 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 
 		msleep(1);
 
-		intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	}
 
 	/* read back the status code of the command */
 	if (res_len == 0)
 		res_len = sizeof(struct wl1271_cmd_header);
-	wl1271_spi_read(wl, wl->cmd_box_addr, cmd, res_len, false);
+	wl1271_read(wl, wl->cmd_box_addr, cmd, res_len, false);
 
 	status = le16_to_cpu(cmd->status);
 	if (status != CMD_STATUS_SUCCESS) {
@@ -87,8 +88,8 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		ret = -EIO;
 	}
 
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
-			   WL1271_ACX_INTR_CMD_COMPLETE);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
+		       WL1271_ACX_INTR_CMD_COMPLETE);
 
 out:
 	return ret;
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 2803e700a75a..7468ef10194b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -24,6 +24,7 @@
 #include "wl1271.h"
 #include "wl1271_reg.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 #include "wl1271_event.h"
 #include "wl1271_ps.h"
 #include "wl12xx_80211.h"
@@ -214,7 +215,7 @@ int wl1271_event_unmask(struct wl1271 *wl)
 
 void wl1271_event_mbox_config(struct wl1271 *wl)
 {
-	wl->mbox_ptr[0] = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
 
 	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
@@ -232,8 +233,8 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 		return -EINVAL;
 
 	/* first we read the mbox descriptor */
-	wl1271_spi_read(wl, wl->mbox_ptr[mbox_num], &mbox,
-			sizeof(struct event_mailbox), false);
+	wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+		    sizeof(struct event_mailbox), false);
 
 	/* process the descriptor */
 	ret = wl1271_event_process(wl, &mbox);
@@ -241,7 +242,7 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 		return ret;
 
 	/* then we let the firmware know it can go on...*/
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.c b/drivers/net/wireless/wl12xx/wl1271_io.c
index dcb588b4670d..00f98bdc48f7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.c
+++ b/drivers/net/wireless/wl12xx/wl1271_io.c
@@ -124,10 +124,10 @@ void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
 void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
 		     size_t len, bool fixed)
 {
-	wl1271_spi_read(wl, addr, buf, len, fixed);
+	wl1271_spi_raw_read(wl, addr, buf, len, fixed);
 }
 
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+void wl1271_read(struct wl1271 *wl, int addr, void *buf, size_t len,
 		     bool fixed)
 {
 	int physical;
@@ -137,8 +137,8 @@ void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
 	wl1271_spi_raw_read(wl, physical, buf, len, fixed);
 }
 
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-		      bool fixed)
+void wl1271_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		  bool fixed)
 {
 	int physical;
 
@@ -147,12 +147,12 @@ void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
 	wl1271_spi_raw_write(wl, physical, buf, len, fixed);
 }
 
-u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
+u32 wl1271_read32(struct wl1271 *wl, int addr)
 {
 	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
 }
 
-void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
+void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
 {
 	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
 }
@@ -161,13 +161,13 @@ void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 {
 	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
 	addr = (addr >> 1) + 0x30000;
-	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+	wl1271_write32(wl, OCP_POR_CTR, addr);
 
 	/* write value to OCP_POR_WDATA */
-	wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
+	wl1271_write32(wl, OCP_DATA_WRITE, val);
 
 	/* write 1 to OCP_CMD */
-	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+	wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE);
 }
 
 u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
@@ -177,14 +177,14 @@ u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
 
 	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
 	addr = (addr >> 1) + 0x30000;
-	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+	wl1271_write32(wl, OCP_POR_CTR, addr);
 
 	/* write 2 to OCP_CMD */
-	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
+	wl1271_write32(wl, OCP_CMD, OCP_CMD_READ);
 
 	/* poll for data ready */
 	do {
-		val = wl1271_spi_read32(wl, OCP_DATA_READ);
+		val = wl1271_read32(wl, OCP_DATA_READ);
 	} while (!(val & OCP_READY_MASK) && --timeout);
 
 	if (!timeout) {
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/wl1271_io.h
index 2dc6abbe4dd5..859d571dc413 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.h
+++ b/drivers/net/wireless/wl12xx/wl1271_io.h
@@ -34,4 +34,33 @@ void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
 void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
 		     size_t len, bool fixed);
 
+/* Translated target IO */
+void wl1271_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed);
+void wl1271_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		      bool fixed);
+u32 wl1271_read32(struct wl1271 *wl, int addr);
+void wl1271_write32(struct wl1271 *wl, int addr, u32 val);
+
+/* Top Register IO */
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
+
+int wl1271_set_partition(struct wl1271 *wl,
+			 struct wl1271_partition_set *p);
+
+static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
+{
+	wl1271_raw_read(wl, addr, &wl->buffer_32,
+			    sizeof(wl->buffer_32), false);
+
+	return wl->buffer_32;
+}
+
+static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
+{
+	wl->buffer_32 = val;
+	wl1271_raw_write(wl, addr, &wl->buffer_32,
+			     sizeof(wl->buffer_32), false);
+}
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index aa8f79c4c98a..46968958aeff 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -38,6 +38,7 @@
 #include "wl12xx_80211.h"
 #include "wl1271_reg.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 #include "wl1271_event.h"
 #include "wl1271_tx.h"
 #include "wl1271_rx.h"
@@ -386,8 +387,7 @@ static void wl1271_fw_status(struct wl1271 *wl,
 	u32 total = 0;
 	int i;
 
-	wl1271_spi_read(wl, FW_STATUS_ADDR, status,
-			sizeof(*status), false);
+	wl1271_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false);
 
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
@@ -434,7 +434,7 @@ static void wl1271_irq_work(struct work_struct *work)
 	if (ret < 0)
 		goto out;
 
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 
 	wl1271_fw_status(wl, wl->fw_status);
 	intr = le32_to_cpu(wl->fw_status->intr);
@@ -476,8 +476,8 @@ static void wl1271_irq_work(struct work_struct *work)
 	}
 
 out_sleep:
-	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
-			   WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
 	wl1271_ps_elp_sleep(wl);
 
 out:
@@ -664,7 +664,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 	/* whal_FwCtrl_BootSm() */
 
 	/* 0. read chip id from CHIP_ID */
-	wl->chip.id = wl1271_spi_read32(wl, CHIP_ID_B);
+	wl->chip.id = wl1271_read32(wl, CHIP_ID_B);
 
 	/* 1. check if chip id is valid */
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index 29f670099d94..e2b1ebf096e8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -24,6 +24,7 @@
 #include "wl1271_reg.h"
 #include "wl1271_ps.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 
 #define WL1271_WAKEUP_TIMEOUT 500
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index e8eee883848f..6730f5b96e76 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -26,6 +26,7 @@
 #include "wl1271_reg.h"
 #include "wl1271_rx.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 
 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
 				  u32 drv_rx_counter)
@@ -166,7 +167,7 @@ static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
 	}
 
 	buf = skb_put(skb, length);
-	wl1271_spi_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
+	wl1271_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
 
 	/* the data read starts with the descriptor */
 	desc = (struct wl1271_rx_descriptor *) buf;
@@ -210,15 +211,13 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
 			wl->rx_mem_pool_addr.addr + 4;
 
 		/* Choose the block we want to read */
-		wl1271_spi_write(wl, WL1271_SLV_REG_DATA,
-				 &wl->rx_mem_pool_addr,
-				 sizeof(wl->rx_mem_pool_addr), false);
+		wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
+			     sizeof(wl->rx_mem_pool_addr), false);
 
 		wl1271_rx_handle_data(wl, buf_size);
 
 		wl->rx_counter++;
 		drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
-		wl1271_spi_write32(wl, RX_DRIVER_COUNTER_ADDRESS,
-				   wl->rx_counter);
+		wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
 	}
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h
index cb7df1c56314..a803596dad4a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.h
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.h
@@ -90,37 +90,7 @@ void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
 		     size_t len, bool fixed);
 
-/* Translated target IO */
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-		     bool fixed);
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-		      bool fixed);
-u32 wl1271_spi_read32(struct wl1271 *wl, int addr);
-void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val);
-
-/* Top Register IO */
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
-
 /* INIT and RESET words */
 void wl1271_spi_reset(struct wl1271 *wl);
 void wl1271_spi_init(struct wl1271 *wl);
-int wl1271_set_partition(struct wl1271 *wl,
-			 struct wl1271_partition_set *p);
-
-static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
-{
-	wl1271_spi_raw_read(wl, addr, &wl->buffer_32,
-			    sizeof(wl->buffer_32), false);
-
-	return wl->buffer_32;
-}
-
-static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
-{
-	wl->buffer_32 = val;
-	wl1271_spi_raw_write(wl, addr, &wl->buffer_32,
-			     sizeof(wl->buffer_32), false);
-}
-
 #endif /* __WL1271_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index f9e06385d9fe..811e739d05bf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -26,6 +26,7 @@
 
 #include "wl1271.h"
 #include "wl1271_spi.h"
+#include "wl1271_io.h"
 #include "wl1271_reg.h"
 #include "wl1271_ps.h"
 #include "wl1271_tx.h"
@@ -165,11 +166,11 @@ static int wl1271_tx_send_packet(struct wl1271 *wl, struct sk_buff *skb,
 	len = WL1271_TX_ALIGN(skb->len);
 
 	/* perform a fixed address block write with the packet */
-	wl1271_spi_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
+	wl1271_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
 
 	/* write packet new counter into the write access register */
 	wl->tx_packets_count++;
-	wl1271_spi_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
+	wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
 	wl1271_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u (%u words)",
@@ -375,8 +376,8 @@ void wl1271_tx_complete(struct wl1271 *wl, u32 count)
 	wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
 
 	/* read the tx results from the chipset */
-	wl1271_spi_read(wl, le32_to_cpu(memmap->tx_result),
-			wl->tx_res_if, sizeof(*wl->tx_res_if), false);
+	wl1271_read(wl, le32_to_cpu(memmap->tx_result),
+		    wl->tx_res_if, sizeof(*wl->tx_res_if), false);
 
 	/* verify that the result buffer is not getting overrun */
 	if (count > TX_HW_RESULT_QUEUE_LEN) {
@@ -397,10 +398,10 @@ void wl1271_tx_complete(struct wl1271 *wl, u32 count)
 	}
 
 	/* write host counter to chipset (to ack) */
-	wl1271_spi_write32(wl, le32_to_cpu(memmap->tx_result) +
-			   offsetof(struct wl1271_tx_hw_res_if,
-				    tx_result_host_counter),
-			   le32_to_cpu(wl->tx_res_if->tx_result_fw_counter));
+	wl1271_write32(wl, le32_to_cpu(memmap->tx_result) +
+		       offsetof(struct wl1271_tx_hw_res_if,
+		       tx_result_host_counter),
+		       le32_to_cpu(wl->tx_res_if->tx_result_fw_counter));
 }
 
 /* caller must hold wl->mutex */
-- 
cgit v1.2.3


From 9b28072220d56fda3249cb7e4e164038b456414d Mon Sep 17 00:00:00 2001
From: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Date: Thu, 18 Feb 2010 13:25:56 +0200
Subject: wl1271: Added IO reset and init functions

Added reset and init functions to IO layer of the driver.

Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_io.c   | 10 ++++++++++
 drivers/net/wireless/wl12xx/wl1271_io.h   |  2 ++
 drivers/net/wireless/wl12xx/wl1271_main.c |  4 ++--
 3 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_io.c b/drivers/net/wireless/wl12xx/wl1271_io.c
index 00f98bdc48f7..5cd94d5666c2 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.c
+++ b/drivers/net/wireless/wl12xx/wl1271_io.c
@@ -115,6 +115,16 @@ int wl1271_set_partition(struct wl1271 *wl,
 	return 0;
 }
 
+void wl1271_io_reset(struct wl1271 *wl)
+{
+	wl1271_spi_reset(wl);
+}
+
+void wl1271_io_init(struct wl1271 *wl)
+{
+	wl1271_spi_init(wl);
+}
+
 void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
 		      size_t len, bool fixed)
 {
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/wl1271_io.h
index 859d571dc413..fa9a0b35788f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.h
+++ b/drivers/net/wireless/wl12xx/wl1271_io.h
@@ -27,6 +27,8 @@
 
 struct wl1271;
 
+void wl1271_io_reset(struct wl1271 *wl);
+void wl1271_io_init(struct wl1271 *wl);
 
 /* Raw target IO, address is not translated */
 void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 46968958aeff..66fb9a0a8efa 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -648,8 +648,8 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 	msleep(WL1271_PRE_POWER_ON_SLEEP);
 	wl1271_power_on(wl);
 	msleep(WL1271_POWER_ON_SLEEP);
-	wl1271_spi_reset(wl);
-	wl1271_spi_init(wl);
+	wl1271_io_reset(wl);
+	wl1271_io_init(wl);
 
 	/* We don't need a real memory partition here, because we only want
 	 * to use the registers at this point. */
-- 
cgit v1.2.3


From c332a4b8eed69a6853dbdbdf16696a45b93e2bf8 Mon Sep 17 00:00:00 2001
From: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Date: Thu, 18 Feb 2010 13:25:57 +0200
Subject: wl1271: Added alloc and free hw functions

Moved allocation and freeing of context structure of the driver to
separate functions from probe and remove functions.

Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1271_main.c | 80 ++++++++++++++++++++-----------
 1 file changed, 53 insertions(+), 27 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 66fb9a0a8efa..2a864b24291d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -2025,23 +2025,17 @@ static struct platform_device wl1271_device = {
 };
 
 #define WL1271_DEFAULT_CHANNEL 0
-static int __devinit wl1271_probe(struct spi_device *spi)
+
+static struct ieee80211_hw *wl1271_alloc_hw(void)
 {
-	struct wl12xx_platform_data *pdata;
 	struct ieee80211_hw *hw;
 	struct wl1271 *wl;
-	int ret, i;
-
-	pdata = spi->dev.platform_data;
-	if (!pdata) {
-		wl1271_error("no platform data");
-		return -ENODEV;
-	}
+	int i;
 
 	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
 	if (!hw) {
 		wl1271_error("could not alloc ieee80211_hw");
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	wl = hw->priv;
@@ -2050,8 +2044,6 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	INIT_LIST_HEAD(&wl->list);
 
 	wl->hw = hw;
-	dev_set_drvdata(&spi->dev, wl);
-	wl->spi = spi;
 
 	skb_queue_head_init(&wl->tx_queue);
 
@@ -2078,6 +2070,54 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	wl->state = WL1271_STATE_OFF;
 	mutex_init(&wl->mutex);
 
+	/* Apply default driver configuration. */
+	wl1271_conf_init(wl);
+
+	return hw;
+}
+
+int wl1271_free_hw(struct wl1271 *wl)
+{
+	ieee80211_unregister_hw(wl->hw);
+
+	wl1271_debugfs_exit(wl);
+
+	kfree(wl->target_mem_map);
+	vfree(wl->fw);
+	wl->fw = NULL;
+	kfree(wl->nvs);
+	wl->nvs = NULL;
+
+	kfree(wl->fw_status);
+	kfree(wl->tx_res_if);
+
+	ieee80211_free_hw(wl->hw);
+
+	return 0;
+}
+
+static int __devinit wl1271_probe(struct spi_device *spi)
+{
+	struct wl12xx_platform_data *pdata;
+	struct ieee80211_hw *hw;
+	struct wl1271 *wl;
+	int ret;
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		wl1271_error("no platform data");
+		return -ENODEV;
+	}
+
+	hw = wl1271_alloc_hw();
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	wl = hw->priv;
+
+	dev_set_drvdata(&spi->dev, wl);
+	wl->spi = spi;
+
 	/* This is the only SPI value that we need to set here, the rest
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
@@ -2119,9 +2159,6 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 	dev_set_drvdata(&wl1271_device.dev, wl);
 
-	/* Apply default driver configuration. */
-	wl1271_conf_init(wl);
-
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
 		goto out_platform;
@@ -2152,21 +2189,10 @@ static int __devexit wl1271_remove(struct spi_device *spi)
 {
 	struct wl1271 *wl = dev_get_drvdata(&spi->dev);
 
-	ieee80211_unregister_hw(wl->hw);
-
-	wl1271_debugfs_exit(wl);
 	platform_device_unregister(&wl1271_device);
 	free_irq(wl->irq, wl);
-	kfree(wl->target_mem_map);
-	vfree(wl->fw);
-	wl->fw = NULL;
-	kfree(wl->nvs);
-	wl->nvs = NULL;
 
-	kfree(wl->fw_status);
-	kfree(wl->tx_res_if);
-
-	ieee80211_free_hw(wl->hw);
+	wl1271_free_hw(wl);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 5c0ba62fd4b2dce08055a89600f1d834f9f0fe9e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 19 Feb 2010 01:46:36 +0100
Subject: ath9k: fix rate control fallback rate selection

When selecting the tx fallback rate, rc.c used a separate variable
'nrix' for storing the next rate index, however it did not use that as
reference for further rate index lowering. Because of that, it ended up
reusing the same rate for multiple multi-rate retry stages, thus
decreasing delivery probability under changing link conditions.

This patch removes the separate (unnecessary) variable and fixes
fallback the way it was intended to work.
This should result in increased throughput and better link stability.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/rc.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 74290137f43d..2880507f9d3f 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -668,7 +668,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	struct ieee80211_tx_rate *rates = tx_info->control.rates;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	__le16 fc = hdr->frame_control;
-	u8 try_per_rate, i = 0, rix, nrix;
+	u8 try_per_rate, i = 0, rix;
 	int is_probe = 0;
 
 	if (rate_control_send_low(sta, priv_sta, txrc))
@@ -688,26 +688,25 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 
 	rate_table = sc->cur_rate_table;
 	rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe);
-	nrix = rix;
 
 	if (is_probe) {
 		/* set one try for probe rates. For the
 		 * probes don't enable rts */
 		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
-				       1, nrix, 0);
+				       1, rix, 0);
 
 		/* Get the next tried/allowed rate. No RTS for the next series
 		 * after the probe rate
 		 */
-		ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
+		ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &rix);
 		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
-				       try_per_rate, nrix, 0);
+				       try_per_rate, rix, 0);
 
 		tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 	} else {
 		/* Set the choosen rate. No RTS for first series entry. */
 		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
-				       try_per_rate, nrix, 0);
+				       try_per_rate, rix, 0);
 	}
 
 	/* Fill in the other rates for multirate retry */
@@ -716,10 +715,10 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 		if (i + 1 == 4)
 			try_per_rate = 8;
 
-		ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
+		ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &rix);
 		/* All other rates in the series have RTS enabled */
 		ath_rc_rate_set_series(rate_table, &rates[i], txrc,
-				       try_per_rate, nrix, 1);
+				       try_per_rate, rix, 1);
 	}
 
 	/*
-- 
cgit v1.2.3


From 4a6547c748229ba0425713b4adeb0f2d4000da9e Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Thu, 18 Feb 2010 22:03:02 -0800
Subject: iwl3945: remove STATUS macros from header

iwl3945 includes iwl-core.h in which these STATUS flags are already
defined. This also removes a potential confusing definition with iwlcore
using STATUS_MODE_PENDING with value 18 and iwl3945 defining (but not
using) STATUS_CONF_PENDING for value 18.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c     |  2 +-
 drivers/net/wireless/iwlwifi/iwl-3945.h     | 18 ------------------
 drivers/net/wireless/iwlwifi/iwl3945-base.c |  2 +-
 3 files changed, 2 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 5913418872ec..521584b99fd1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -45,8 +45,8 @@
 #include "iwl-sta.h"
 #include "iwl-3945.h"
 #include "iwl-eeprom.h"
-#include "iwl-helpers.h"
 #include "iwl-core.h"
+#include "iwl-helpers.h"
 #include "iwl-led.h"
 #include "iwl-3945-led.h"
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index db4137d9a3ab..ae94babe595b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -171,24 +171,6 @@ struct iwl3945_frame {
 
 #define SCAN_INTERVAL 100
 
-#define STATUS_HCMD_ACTIVE	0	/* host command in progress */
-#define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
-#define STATUS_INT_ENABLED	2
-#define STATUS_RF_KILL_HW	3
-#define STATUS_INIT		5
-#define STATUS_ALIVE		6
-#define STATUS_READY		7
-#define STATUS_TEMPERATURE	8
-#define STATUS_GEO_CONFIGURED	9
-#define STATUS_EXIT_PENDING	10
-#define STATUS_STATISTICS	12
-#define STATUS_SCANNING		13
-#define STATUS_SCAN_ABORTING	14
-#define STATUS_SCAN_HW		15
-#define STATUS_POWER_PMI	16
-#define STATUS_FW_ERROR		17
-#define STATUS_CONF_PENDING	18
-
 #define MAX_TID_COUNT        9
 
 #define IWL_INVALID_RATE     0xFF
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 3df488a8cf75..0e5a1ca30334 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -53,8 +53,8 @@
 #include "iwl-commands.h"
 #include "iwl-sta.h"
 #include "iwl-3945.h"
-#include "iwl-helpers.h"
 #include "iwl-core.h"
+#include "iwl-helpers.h"
 #include "iwl-dev.h"
 #include "iwl-spectrum.h"
 
-- 
cgit v1.2.3


From d2dfe6df755abb365aa3e2e67d88bda3cce5fd12 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Thu, 18 Feb 2010 22:03:04 -0800
Subject: iwlwifi: enable serialization of synchronous commands

Until now it was only possible to have one synchronous command running at
any time. If a synchronous command is in progress when a second request
arrives then the second command will fail. Create a new mutex specific for
this purpose to only allow one synchronous command at a time, but enable
other commands to wait instead of fail if a synchronous command is in
progress.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c      |  1 +
 drivers/net/wireless/iwlwifi/iwl-core.h     |  2 +-
 drivers/net/wireless/iwlwifi/iwl-debugfs.c  |  2 --
 drivers/net/wireless/iwlwifi/iwl-dev.h      |  1 +
 drivers/net/wireless/iwlwifi/iwl-hcmd.c     | 14 +++++++-------
 drivers/net/wireless/iwlwifi/iwl-tx.c       |  2 ++
 drivers/net/wireless/iwlwifi/iwl3945-base.c |  1 +
 7 files changed, 13 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 4157c6c8645f..52b6beb371fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3364,6 +3364,7 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	INIT_LIST_HEAD(&priv->free_frames);
 
 	mutex_init(&priv->mutex);
+	mutex_init(&priv->sync_cmd_mutex);
 
 	/* Clear the driver's (not device's) station table */
 	iwl_clear_stations_table(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 530fae8cf16d..6347d4b5c22f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -603,7 +603,7 @@ void iwlcore_free_geos(struct iwl_priv *priv);
 /*************** DRIVER STATUS FUNCTIONS   *****/
 
 #define STATUS_HCMD_ACTIVE	0	/* host command in progress */
-#define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
+/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
 #define STATUS_CT_KILL		4
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 78298be0bdb6..7241fda022c5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -530,8 +530,6 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_ACTIVE:\t %d\n",
 		test_bit(STATUS_HCMD_ACTIVE, &priv->status));
-	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_SYNC_ACTIVE: %d\n",
-		test_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INT_ENABLED:\t %d\n",
 		test_bit(STATUS_INT_ENABLED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index f81317d478ee..021c68658718 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1111,6 +1111,7 @@ struct iwl_priv {
 	spinlock_t hcmd_lock;	/* protect hcmd */
 	spinlock_t reg_lock;	/* protect hw register access */
 	struct mutex mutex;
+	struct mutex sync_cmd_mutex; /* enable serialization of sync commands */
 
 	/* basic pci-network driver stuff */
 	struct pci_dev *pci_dev;
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 86783c27d97c..73681c4fefe7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -164,15 +164,13 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	 /* A synchronous command can not have a callback set. */
 	BUG_ON(cmd->callback);
 
-	if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)) {
-		IWL_ERR(priv,
-			"Error sending %s: Already sending a host command\n",
+	IWL_DEBUG_INFO(priv, "Attempting to send sync command %s\n",
 			get_cmd_string(cmd->id));
-		ret = -EBUSY;
-		goto out;
-	}
+	mutex_lock(&priv->sync_cmd_mutex);
 
 	set_bit(STATUS_HCMD_ACTIVE, &priv->status);
+	IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s \n",
+			get_cmd_string(cmd->id));
 
 	cmd_idx = iwl_enqueue_hcmd(priv, cmd);
 	if (cmd_idx < 0) {
@@ -193,6 +191,8 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 				jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
 
 			clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+			IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
+				       get_cmd_string(cmd->id));
 			ret = -ETIMEDOUT;
 			goto cancel;
 		}
@@ -237,7 +237,7 @@ fail:
 		cmd->reply_page = 0;
 	}
 out:
-	clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
+	mutex_unlock(&priv->sync_cmd_mutex);
 	return ret;
 }
 EXPORT_SYMBOL(iwl_send_cmd_sync);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index d8c11f955e42..38655ad8f43c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1238,6 +1238,8 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 
 	if (!(meta->flags & CMD_ASYNC)) {
 		clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+		IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
+			       get_cmd_string(cmd->hdr.cmd));
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 0e5a1ca30334..54daa38ecba3 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3847,6 +3847,7 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	INIT_LIST_HEAD(&priv->free_frames);
 
 	mutex_init(&priv->mutex);
+	mutex_init(&priv->sync_cmd_mutex);
 
 	/* Clear the driver's (not device's) station table */
 	iwl_clear_stations_table(priv);
-- 
cgit v1.2.3


From d5755939e810f38c969a1d1b0effb2b75095b94e Mon Sep 17 00:00:00 2001
From: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Date: Thu, 18 Feb 2010 22:03:05 -0800
Subject: iwlwifi: indicate calib version for 6050 series

Indicate calibration version to uCode

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-6000.c | 79 ++++++++++++++++++++++++++++++++-
 drivers/net/wireless/iwlwifi/iwl-core.h |  1 +
 drivers/net/wireless/iwlwifi/iwl-csr.h  |  2 +-
 3 files changed, 79 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 782e23a26984..c4844adff92a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -70,6 +70,14 @@ static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
 	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
 }
 
+/* Indicate calibration version to uCode. */
+static void iwl6050_set_calib_version(struct iwl_priv *priv)
+{
+	if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
+		iwl_set_bit(priv, CSR_GP_DRIVER_REG,
+				CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+}
+
 /* NIC configuration for 6000 series */
 static void iwl6000_nic_config(struct iwl_priv *priv)
 {
@@ -96,6 +104,8 @@ static void iwl6000_nic_config(struct iwl_priv *priv)
 			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
 	}
 	/* else do nothing, uCode configured */
+	if (priv->cfg->ops->lib->temp_ops.set_calib_version)
+		priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
 }
 
 static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
@@ -277,6 +287,71 @@ static const struct iwl_ops iwl6000_ops = {
 	.led = &iwlagn_led_ops,
 };
 
+static struct iwl_lib_ops iwl6050_lib = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
+	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
+	.txq_set_sched = iwl5000_txq_set_sched,
+	.txq_agg_enable = iwl5000_txq_agg_enable,
+	.txq_agg_disable = iwl5000_txq_agg_disable,
+	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+	.txq_free_tfd = iwl_hw_txq_free_tfd,
+	.txq_init = iwl_hw_tx_queue_init,
+	.rx_handler_setup = iwl5000_rx_handler_setup,
+	.setup_deferred_work = iwl5000_setup_deferred_work,
+	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+	.load_ucode = iwl5000_load_ucode,
+	.dump_nic_event_log = iwl_dump_nic_event_log,
+	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.dump_csr = iwl_dump_csr,
+	.dump_fh = iwl_dump_fh,
+	.init_alive_start = iwl5000_init_alive_start,
+	.alive_notify = iwl5000_alive_notify,
+	.send_tx_power = iwl5000_send_tx_power,
+	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.apm_ops = {
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
+		.config = iwl6000_nic_config,
+		.set_pwr_src = iwl_set_pwr_src,
+	},
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_5000_REG_BAND_1_CHANNELS,
+			EEPROM_5000_REG_BAND_2_CHANNELS,
+			EEPROM_5000_REG_BAND_3_CHANNELS,
+			EEPROM_5000_REG_BAND_4_CHANNELS,
+			EEPROM_5000_REG_BAND_5_CHANNELS,
+			EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+			EEPROM_5000_REG_BAND_52_HT40_CHANNELS
+		},
+		.verify_signature  = iwlcore_eeprom_verify_signature,
+		.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+		.release_semaphore = iwlcore_eeprom_release_semaphore,
+		.calib_version	= iwl5000_eeprom_calib_version,
+		.query_addr = iwl5000_eeprom_query_addr,
+		.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
+	},
+	.post_associate = iwl_post_associate,
+	.isr = iwl_isr_ict,
+	.config_ap = iwl_config_ap,
+	.temp_ops = {
+		.temperature = iwl5000_temperature,
+		.set_ct_kill = iwl6000_set_ct_threshold,
+		.set_calib_version = iwl6050_set_calib_version,
+	 },
+	.add_bcast_station = iwl_add_bcast_station,
+};
+
+static const struct iwl_ops iwl6050_ops = {
+	.ucode = &iwl5000_ucode,
+	.lib = &iwl6050_lib,
+	.hcmd = &iwl5000_hcmd,
+	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
+};
+
 /*
  * "i": Internal configuration, use internal Power Amplifier
  */
@@ -380,7 +455,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6000_ops,
+	.ops = &iwl6050_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
@@ -412,7 +487,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G,
-	.ops = &iwl6000_ops,
+	.ops = &iwl6050_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 6347d4b5c22f..3df79331039c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -117,6 +117,7 @@ struct iwl_apm_ops {
 struct iwl_temp_ops {
 	void (*temperature)(struct iwl_priv *priv);
 	void (*set_ct_kill)(struct iwl_priv *priv);
+	void (*set_calib_version)(struct iwl_priv *priv);
 };
 
 struct iwl_ucode_ops {
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 1e00720bf8b1..808b7146bead 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -369,7 +369,7 @@
 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB	    (0x00000000)
 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB	    (0x00000001)
 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA	    (0x00000002)
-
+#define CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6	(0x00000004)
 
 /* GIO Chicken Bits (PCI Express bus link power management) */
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
-- 
cgit v1.2.3


From 8a472da431998b7357e6dc562e79a3061ed56cad Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Thu, 18 Feb 2010 22:03:06 -0800
Subject: iwlwifi: separated time check for different type of force reset

Use different timing duration check for different type of force reset,
force reset request can come from different source and based on
different reason; one type of reset request should not block other type of
reset request.

Adding structure to keep track of different force reset request.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c  |  6 ++++++
 drivers/net/wireless/iwlwifi/iwl-core.c | 25 ++++++++++++++-----------
 drivers/net/wireless/iwlwifi/iwl-dev.h  | 14 +++++++++++++-
 3 files changed, 33 insertions(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 52b6beb371fe..c5b724eaf306 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3378,6 +3378,12 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
 	priv->agg_tids_count = 0;
 
+	/* initialize force reset */
+	priv->force_reset[IWL_RF_RESET].reset_duration =
+		IWL_DELAY_NEXT_FORCE_RF_RESET;
+	priv->force_reset[IWL_FW_RESET].reset_duration =
+		IWL_DELAY_NEXT_FORCE_FW_RELOAD;
+
 	/* Choose which receivers/antennas to use */
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
 		priv->cfg->ops->hcmd->set_rxon_chain(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index bd56827b8fef..55252a692de7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -3357,22 +3357,30 @@ static void iwl_force_rf_reset(struct iwl_priv *priv)
 	return;
 }
 
-#define IWL_DELAY_NEXT_FORCE_RESET (HZ*3)
 
 int iwl_force_reset(struct iwl_priv *priv, int mode)
 {
+	struct iwl_force_reset *force_reset;
+
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return -EINVAL;
 
-	if (priv->last_force_reset_jiffies &&
-	    time_after(priv->last_force_reset_jiffies +
-		       IWL_DELAY_NEXT_FORCE_RESET, jiffies)) {
+	if (mode >= IWL_MAX_FORCE_RESET) {
+		IWL_DEBUG_INFO(priv, "invalid reset request.\n");
+		return -EINVAL;
+	}
+	force_reset = &priv->force_reset[mode];
+	force_reset->reset_request_count++;
+	if (force_reset->last_force_reset_jiffies &&
+	    time_after(force_reset->last_force_reset_jiffies +
+	    force_reset->reset_duration, jiffies)) {
 		IWL_DEBUG_INFO(priv, "force reset rejected\n");
+		force_reset->reset_reject_count++;
 		return -EAGAIN;
 	}
-
+	force_reset->reset_success_count++;
+	force_reset->last_force_reset_jiffies = jiffies;
 	IWL_DEBUG_INFO(priv, "perform force reset (%d)\n", mode);
-
 	switch (mode) {
 	case IWL_RF_RESET:
 		iwl_force_rf_reset(priv);
@@ -3389,12 +3397,7 @@ int iwl_force_reset(struct iwl_priv *priv, int mode)
 		clear_bit(STATUS_READY, &priv->status);
 		queue_work(priv->workqueue, &priv->restart);
 		break;
-	default:
-		IWL_DEBUG_INFO(priv, "invalid reset request.\n");
-		return -EINVAL;
 	}
-	priv->last_force_reset_jiffies = jiffies;
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 021c68658718..7914d65a5a55 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1036,9 +1036,21 @@ struct iwl_event_log {
 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF	(200)
 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX	(255)
 
+#define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
+#define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
+
 enum iwl_reset {
 	IWL_RF_RESET = 0,
 	IWL_FW_RESET,
+	IWL_MAX_FORCE_RESET,
+};
+
+struct iwl_force_reset {
+	int reset_request_count;
+	int reset_success_count;
+	int reset_reject_count;
+	unsigned long reset_duration;
+	unsigned long last_force_reset_jiffies;
 };
 
 struct iwl_priv {
@@ -1076,7 +1088,7 @@ struct iwl_priv {
 	u8 agg_tids_count;
 
 	/* force reset */
-	unsigned long last_force_reset_jiffies;
+	struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
 
 	/* we allocate array of iwl4965_channel_info for NIC's valid channels.
 	 *    Access via channel # using indirect index array */
-- 
cgit v1.2.3


From 528c3126a98e75f47fc9fa11b243c82a59271d0d Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Thu, 18 Feb 2010 22:03:07 -0800
Subject: iwlwifi: add debugfs to monitor force reset parameters

Adding debugfs file to monitor the counters and other
information related to "force_reset" request.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-debugfs.c | 34 ++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 7241fda022c5..7bf44f146799 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2221,6 +2221,36 @@ static ssize_t iwl_dbgfs_plcp_delta_write(struct file *file,
 	return count;
 }
 
+static ssize_t iwl_dbgfs_force_reset_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int i, pos = 0;
+	char buf[300];
+	const size_t bufsz = sizeof(buf);
+	struct iwl_force_reset *force_reset;
+
+	for (i = 0; i < IWL_MAX_FORCE_RESET; i++) {
+		force_reset = &priv->force_reset[i];
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"Force reset method %d\n", i);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"\tnumber of reset request: %d\n",
+				force_reset->reset_request_count);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"\tnumber of reset request success: %d\n",
+				force_reset->reset_success_count);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"\tnumber of reset request reject: %d\n",
+				force_reset->reset_reject_count);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"\treset duration: %lu\n",
+				force_reset->reset_duration);
+	}
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
 static ssize_t iwl_dbgfs_force_reset_write(struct file *file,
 					const char __user *user_buf,
 					size_t count, loff_t *ppos) {
@@ -2267,7 +2297,7 @@ DEBUGFS_READ_FILE_OPS(fh_reg);
 DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon);
 DEBUGFS_WRITE_FILE_OPS(internal_scan);
 DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta);
-DEBUGFS_WRITE_FILE_OPS(force_reset);
+DEBUGFS_READ_WRITE_FILE_OPS(force_reset);
 
 /*
  * Create the debugfs files and directories
@@ -2321,7 +2351,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(missed_beacon, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(internal_scan, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(plcp_delta, dir_debug, S_IWUSR | S_IRUSR);
-	DEBUGFS_ADD_FILE(force_reset, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(force_reset, dir_debug, S_IWUSR | S_IRUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, dir_debug, S_IRUSR);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR);
-- 
cgit v1.2.3


From d8728ee919282c7b01b65cd479ec1e2a9c5d3ba8 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 19 Feb 2010 18:21:42 +0100
Subject: ath9k: fix beacon timer restart after a card reset

In AP mode, ath_beacon_config_ap only restarts the timer if a TSF
restart is requested. Apparently this was added, because this function
unconditionally sets the flag for TSF reset.

The problem with this is, that ath9k_hw_reset() clobbers the timer
registers (specified in the initvals), thus effectively disabling the
SWBA interrupt whenever a card reset without TSF reset is issued
(happens in a few places in the code).

This patch fixes ath_beacon_config_ap to only issue the TSF reset flag
when necessary, but reinitialize the timer unconditionally. Tests show,
that this is enough to keep the SWBA interrupt going after a call to
ath_reset()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/beacon.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 42171d043c31..b4a31a43a62c 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -526,16 +526,13 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
 {
 	u32 nexttbtt, intval;
 
-	/* Configure the timers only when the TSF has to be reset */
-
-	if (!(sc->sc_flags & SC_OP_TSF_RESET))
-		return;
-
 	/* NB: the beacon interval is kept internally in TU's */
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
 	intval /= ATH_BCBUF;    /* for staggered beacons */
 	nexttbtt = intval;
-	intval |= ATH9K_BEACON_RESET_TSF;
+
+	if (sc->sc_flags & SC_OP_TSF_RESET)
+		intval |= ATH9K_BEACON_RESET_TSF;
 
 	/*
 	 * In AP mode we enable the beacon timers and SWBA interrupts to
-- 
cgit v1.2.3


From 3e60f8607e8072e8b554e9ccb8a4691c580adae4 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 19 Feb 2010 19:06:53 +0100
Subject: ar9170: convert to new station add/remove callbacks

This converts ar9170 to use the new station
add/remove callbacks instead of using the
old sta_notify callback.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/main.c | 70 +++++++++++++++++-----------------
 1 file changed, 36 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 91797cb6e0e8..8a964f130367 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2329,54 +2329,55 @@ out:
 	return err;
 }
 
-static void ar9170_sta_notify(struct ieee80211_hw *hw,
-			      struct ieee80211_vif *vif,
-			      enum sta_notify_cmd cmd,
-			      struct ieee80211_sta *sta)
+static int ar9170_sta_add(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  struct ieee80211_sta *sta)
 {
 	struct ar9170 *ar = hw->priv;
 	struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
 	unsigned int i;
 
-	switch (cmd) {
-	case STA_NOTIFY_ADD:
-		memset(sta_info, 0, sizeof(*sta_info));
+	memset(sta_info, 0, sizeof(*sta_info));
 
-		if (!sta->ht_cap.ht_supported)
-			break;
+	if (!sta->ht_cap.ht_supported)
+		return 0;
 
-		if (sta->ht_cap.ampdu_density > ar->global_ampdu_density)
-			ar->global_ampdu_density = sta->ht_cap.ampdu_density;
+	if (sta->ht_cap.ampdu_density > ar->global_ampdu_density)
+		ar->global_ampdu_density = sta->ht_cap.ampdu_density;
 
-		if (sta->ht_cap.ampdu_factor < ar->global_ampdu_factor)
-			ar->global_ampdu_factor = sta->ht_cap.ampdu_factor;
+	if (sta->ht_cap.ampdu_factor < ar->global_ampdu_factor)
+		ar->global_ampdu_factor = sta->ht_cap.ampdu_factor;
 
-		for (i = 0; i < AR9170_NUM_TID; i++) {
-			sta_info->agg[i].state = AR9170_TID_STATE_SHUTDOWN;
-			sta_info->agg[i].active = false;
-			sta_info->agg[i].ssn = 0;
-			sta_info->agg[i].tid = i;
-			INIT_LIST_HEAD(&sta_info->agg[i].list);
-			skb_queue_head_init(&sta_info->agg[i].queue);
-		}
+	for (i = 0; i < AR9170_NUM_TID; i++) {
+		sta_info->agg[i].state = AR9170_TID_STATE_SHUTDOWN;
+		sta_info->agg[i].active = false;
+		sta_info->agg[i].ssn = 0;
+		sta_info->agg[i].tid = i;
+		INIT_LIST_HEAD(&sta_info->agg[i].list);
+		skb_queue_head_init(&sta_info->agg[i].queue);
+	}
 
-		sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor);
-		break;
+	sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor);
 
-	case STA_NOTIFY_REMOVE:
-		if (!sta->ht_cap.ht_supported)
-			break;
+	return 0;
+}
 
-		for (i = 0; i < AR9170_NUM_TID; i++) {
-			sta_info->agg[i].state = AR9170_TID_STATE_INVALID;
-			skb_queue_purge(&sta_info->agg[i].queue);
-		}
+static int ar9170_sta_remove(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_sta *sta)
+{
+	struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
+	unsigned int i;
 
-		break;
+	if (!sta->ht_cap.ht_supported)
+		return 0;
 
-	default:
-		break;
+	for (i = 0; i < AR9170_NUM_TID; i++) {
+		sta_info->agg[i].state = AR9170_TID_STATE_INVALID;
+		skb_queue_purge(&sta_info->agg[i].queue);
 	}
+
+	return 0;
 }
 
 static int ar9170_get_stats(struct ieee80211_hw *hw,
@@ -2495,7 +2496,8 @@ static const struct ieee80211_ops ar9170_ops = {
 	.bss_info_changed	= ar9170_op_bss_info_changed,
 	.get_tsf		= ar9170_op_get_tsf,
 	.set_key		= ar9170_set_key,
-	.sta_notify		= ar9170_sta_notify,
+	.sta_add		= ar9170_sta_add,
+	.sta_remove		= ar9170_sta_remove,
 	.get_stats		= ar9170_get_stats,
 	.ampdu_action		= ar9170_ampdu_action,
 };
-- 
cgit v1.2.3


From 17f6f054fec57b1bd5c8333bc40b1f3b2b7941aa Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 19 Feb 2010 19:06:54 +0100
Subject: p54: convert to new station add/remove callbacks

This converts p54 to use the new station
add/remove callbacks instead of using the
old sta_notify callback.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/main.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 3fe6366e567c..4f752a21495f 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -33,21 +33,29 @@ MODULE_DESCRIPTION("Softmac Prism54 common code");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("prism54common");
 
+static int p54_sta_add_remove(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct ieee80211_sta *sta)
+{
+	struct p54_common *priv = hw->priv;
+
+	/*
+	 * Notify the firmware that we don't want or we don't
+	 * need to buffer frames for this station anymore.
+	 */
+
+	p54_sta_unlock(priv, sta->addr);
+
+	return 0;
+}
+
 static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
 			      enum sta_notify_cmd notify_cmd,
 			      struct ieee80211_sta *sta)
 {
 	struct p54_common *priv = dev->priv;
-	switch (notify_cmd) {
-	case STA_NOTIFY_ADD:
-	case STA_NOTIFY_REMOVE:
-		/*
-		 * Notify the firmware that we don't want or we don't
-		 * need to buffer frames for this station anymore.
-		 */
 
-		p54_sta_unlock(priv, sta->addr);
-		break;
+	switch (notify_cmd) {
 	case STA_NOTIFY_AWAKE:
 		/* update the firmware's filter table */
 		p54_sta_unlock(priv, sta->addr);
@@ -506,6 +514,8 @@ static const struct ieee80211_ops p54_ops = {
 	.remove_interface	= p54_remove_interface,
 	.set_tim		= p54_set_tim,
 	.sta_notify		= p54_sta_notify,
+	.sta_add		= p54_sta_add_remove,
+	.sta_remove		= p54_sta_add_remove,
 	.set_key		= p54_set_key,
 	.config			= p54_config,
 	.bss_info_changed	= p54_bss_info_changed,
-- 
cgit v1.2.3


From 1d669cbf52a01490c14a999daa978e0fa00b494d Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 19 Feb 2010 19:06:55 +0100
Subject: mac80211_hwsim: convert to new station add/remove callbacks

This converts mac80211_hwsim to use the new
station add/remove callbacks instead of using
the old sta_notify callback.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 00ffe6dd435e..6ea77e95277b 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -771,23 +771,41 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 	}
 }
 
+static int mac80211_hwsim_sta_add(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_sta *sta)
+{
+	hwsim_check_magic(vif);
+	hwsim_set_sta_magic(sta);
+
+	return 0;
+}
+
+static int mac80211_hwsim_sta_remove(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_sta *sta)
+{
+	hwsim_check_magic(vif);
+	hwsim_clear_sta_magic(sta);
+
+	return 0;
+}
+
 static void mac80211_hwsim_sta_notify(struct ieee80211_hw *hw,
 				      struct ieee80211_vif *vif,
 				      enum sta_notify_cmd cmd,
 				      struct ieee80211_sta *sta)
 {
 	hwsim_check_magic(vif);
+
 	switch (cmd) {
-	case STA_NOTIFY_ADD:
-		hwsim_set_sta_magic(sta);
-		break;
-	case STA_NOTIFY_REMOVE:
-		hwsim_clear_sta_magic(sta);
-		break;
 	case STA_NOTIFY_SLEEP:
 	case STA_NOTIFY_AWAKE:
 		/* TODO: make good use of these flags */
 		break;
+	default:
+		WARN(1, "Invalid sta notify: %d\n", cmd);
+		break;
 	}
 }
 
@@ -958,6 +976,8 @@ static struct ieee80211_ops mac80211_hwsim_ops =
 	.config = mac80211_hwsim_config,
 	.configure_filter = mac80211_hwsim_configure_filter,
 	.bss_info_changed = mac80211_hwsim_bss_info_changed,
+	.sta_add = mac80211_hwsim_sta_add,
+	.sta_remove = mac80211_hwsim_sta_remove,
 	.sta_notify = mac80211_hwsim_sta_notify,
 	.set_tim = mac80211_hwsim_set_tim,
 	.conf_tx = mac80211_hwsim_conf_tx,
-- 
cgit v1.2.3


From 4ca778605cfec53d8a689f0b57babb93b030c784 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 19 Feb 2010 19:06:56 +0100
Subject: ath9k: convert to new station add/remove callbacks

This converts ath9k to use the new station
add/remove callbacks instead of using the
old sta_notify callback.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9c8f925c2093..67ca4e5a6017 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1684,24 +1684,28 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw,
 		  "Set HW RX filter: 0x%x\n", rfilt);
 }
 
-static void ath9k_sta_notify(struct ieee80211_hw *hw,
-			     struct ieee80211_vif *vif,
-			     enum sta_notify_cmd cmd,
-			     struct ieee80211_sta *sta)
+static int ath9k_sta_add(struct ieee80211_hw *hw,
+			 struct ieee80211_vif *vif,
+			 struct ieee80211_sta *sta)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 
-	switch (cmd) {
-	case STA_NOTIFY_ADD:
-		ath_node_attach(sc, sta);
-		break;
-	case STA_NOTIFY_REMOVE:
-		ath_node_detach(sc, sta);
-		break;
-	default:
-		break;
-	}
+	ath_node_attach(sc, sta);
+
+	return 0;
+}
+
+static int ath9k_sta_remove(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta)
+{
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+
+	ath_node_detach(sc, sta);
+
+	return 0;
 }
 
 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
@@ -2045,7 +2049,8 @@ struct ieee80211_ops ath9k_ops = {
 	.remove_interface   = ath9k_remove_interface,
 	.config 	    = ath9k_config,
 	.configure_filter   = ath9k_configure_filter,
-	.sta_notify         = ath9k_sta_notify,
+	.sta_add	    = ath9k_sta_add,
+	.sta_remove	    = ath9k_sta_remove,
 	.conf_tx 	    = ath9k_conf_tx,
 	.bss_info_changed   = ath9k_bss_info_changed,
 	.set_key            = ath9k_set_key,
-- 
cgit v1.2.3


From 91fea5858418127ad33e0060f726c62be0047eaf Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Fri, 19 Feb 2010 08:48:47 +0000
Subject: net/pcmcia: convert to use netdev_for_each_mc_addr

removed fill_multicast_tbl function in smc91c92_cs and do the work inline

rewritten set_addresses function in xirc2ps_cs. This was kinda headache.
Simulated the original and new functions and they bahave the same.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/axnet_cs.c    |  7 ++--
 drivers/net/pcmcia/fmvj18x_cs.c  |  6 +--
 drivers/net/pcmcia/nmclan_cs.c   |  6 +--
 drivers/net/pcmcia/smc91c92_cs.c | 33 +++++-----------
 drivers/net/pcmcia/xirc2ps_cs.c  | 84 ++++++++++++++++++++++++----------------
 5 files changed, 67 insertions(+), 69 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 2ee57bd52a01..d90e0fcdbce1 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1625,8 +1625,7 @@ static inline void make_mc_bits(u8 *bits, struct net_device *dev)
 	struct dev_mc_list *dmi;
 	u32 crc;
 
-	for (dmi=dev->mc_list; dmi; dmi=dmi->next) {
-		
+	netdev_for_each_mc_addr(dmi, dev) {
 		crc = ether_crc(ETH_ALEN, dmi->dmi_addr);
 		/* 
 		 * The 8390 uses the 6 most significant bits of the
@@ -1652,7 +1651,7 @@ static void do_set_multicast_list(struct net_device *dev)
 
 	if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) {
 		memset(ei_local->mcfilter, 0, 8);
-		if (dev->mc_list)
+		if (!netdev_mc_empty(dev))
 			make_mc_bits(ei_local->mcfilter, dev);
 	} else {
 		/* set to accept-all */
@@ -1668,7 +1667,7 @@ static void do_set_multicast_list(struct net_device *dev)
 
   	if(dev->flags&IFF_PROMISC)
   		outb_p(E8390_RXCONFIG | 0x58, e8390_base + EN0_RXCR);
-	else if(dev->flags&IFF_ALLMULTI || dev->mc_list)
+	else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev))
   		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
   	else
   		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 3d573ed5f7c5..b9dc80b9d04a 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -1199,10 +1199,8 @@ static void set_rx_mode(struct net_device *dev)
 	struct dev_mc_list *mclist;
 
 	memset(mc_filter, 0, sizeof(mc_filter));
-	for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-	     i++, mclist = mclist->next) {
-	    unsigned int bit =
-	    	ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
+	netdev_for_each_mc_addr(mclist, dev) {
+	    unsigned int bit = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
 	    mc_filter[bit >> 3] |= (1 << (bit & 7));
 	}
 	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index c42a31a97fa3..c717b143f11a 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1475,8 +1475,7 @@ static void set_multicast_list(struct net_device *dev)
 {
   mace_private *lp = netdev_priv(dev);
   int adr[ETHER_ADDR_LEN] = {0}; /* Ethernet address */
-  int i;
-  struct dev_mc_list *dmi = dev->mc_list;
+  struct dev_mc_list *dmi;
 
 #ifdef PCMCIA_DEBUG
   {
@@ -1496,9 +1495,8 @@ static void set_multicast_list(struct net_device *dev)
   if (num_addrs > 0) {
     /* Calculate multicast logical address filter */
     memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
-    for (i = 0; i < netdev_mc_count(dev); i++) {
+    netdev_for_each_mc_addr(dmi, dev) {
       memcpy(adr, dmi->dmi_addr, ETHER_ADDR_LEN);
-      dmi = dmi->next;
       BuildLAF(lp->multicast_ladrf, adr);
     }
   }
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index d2e86b8887c8..d29c22a80a06 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1593,27 +1593,6 @@ static void smc_rx(struct net_device *dev)
     return;
 }
 
-/*======================================================================
-
-    Calculate values for the hardware multicast filter hash table.
-
-======================================================================*/
-
-static void fill_multicast_tbl(int count, struct dev_mc_list *addrs,
-			       u_char *multicast_table)
-{
-    struct dev_mc_list	*mc_addr;
-
-    for (mc_addr = addrs;  mc_addr && count-- > 0;  mc_addr = mc_addr->next) {
-	u_int position = ether_crc(6, mc_addr->dmi_addr);
-#ifndef final_version		/* Verify multicast address. */
-	if ((mc_addr->dmi_addr[0] & 1) == 0)
-	    continue;
-#endif
-	multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
-    }
-}
-
 /*======================================================================
 
     Set the receive mode.
@@ -1639,8 +1618,16 @@ static void set_rx_mode(struct net_device *dev)
 	rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
     else {
 	if (!netdev_mc_empty(dev)) {
-	    fill_multicast_tbl(netdev_mc_count(dev), dev->mc_list,
-			       (u_char *)multicast_table);
+	    struct dev_mc_list *mc_addr;
+
+	    netdev_for_each_mc_addr(mc_addr, dev) {
+		u_int position = ether_crc(6, mc_addr->dmi_addr);
+#ifndef final_version		/* Verify multicast address. */
+		if ((mc_addr->dmi_addr[0] & 1) == 0)
+		    continue;
+#endif
+		multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
+	    }
 	}
 	rx_cfg_setting = RxStripCRC | RxEnable;
     }
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 4ace18a71152..4d1802e457be 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1364,47 +1364,63 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev)
     return NETDEV_TX_OK;
 }
 
+struct set_address_info {
+	int reg_nr;
+	int page_nr;
+	int mohawk;
+	unsigned int ioaddr;
+};
+
+static void set_address(struct set_address_info *sa_info, char *addr)
+{
+	unsigned int ioaddr = sa_info->ioaddr;
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		if (sa_info->reg_nr > 15) {
+			sa_info->reg_nr = 8;
+			sa_info->page_nr++;
+			SelectPage(sa_info->page_nr);
+		}
+		if (sa_info->mohawk)
+			PutByte(sa_info->reg_nr++, addr[5 - i]);
+		else
+			PutByte(sa_info->reg_nr++, addr[i]);
+	}
+}
+
 /****************
  * Set all addresses: This first one is the individual address,
  * the next 9 addresses are taken from the multicast list and
  * the rest is filled with the individual address.
  */
-static void
-set_addresses(struct net_device *dev)
+static void set_addresses(struct net_device *dev)
 {
-    unsigned int ioaddr = dev->base_addr;
-    local_info_t *lp = netdev_priv(dev);
-    struct dev_mc_list *dmi = dev->mc_list;
-    unsigned char *addr;
-    int i,j,k,n;
-
-    SelectPage(k=0x50);
-    for (i=0,j=8,n=0; ; i++, j++) {
-	if (i > 5) {
-	    if (++n > 9)
-		break;
-	    i = 0;
-	    if (n > 1 && n <= netdev_mc_count(dev) && dmi) {
-	   	 dmi = dmi->next;
-	    }
-	}
-	if (j > 15) {
-	    j = 8;
-	    k++;
-	    SelectPage(k);
-	}
-
-	if (n && n <= netdev_mc_count(dev) && dmi)
-	    addr = dmi->dmi_addr;
-	else
-	    addr = dev->dev_addr;
+	unsigned int ioaddr = dev->base_addr;
+	local_info_t *lp = netdev_priv(dev);
+	struct dev_mc_list *dmi;
+	struct set_address_info sa_info;
+	int i;
 
-	if (lp->mohawk)
-	    PutByte(j, addr[5-i]);
-	else
-	    PutByte(j, addr[i]);
-    }
-    SelectPage(0);
+	/*
+	 * Setup the info structure so that by first set_address call it will do
+	 * SelectPage with the right page number. Hence these ones here.
+	 */
+	sa_info.reg_nr = 15 + 1;
+	sa_info.page_nr = 0x50 - 1;
+	sa_info.mohawk = lp->mohawk;
+	sa_info.ioaddr = ioaddr;
+
+	set_address(&sa_info, dev->dev_addr);
+	i = 0;
+	netdev_for_each_mc_addr(dmi, dev) {
+		if (i++ == 9)
+			break;
+		set_address(&sa_info, dmi->dmi_addr);
+	}
+	while (i++ < 9)
+		set_address(&sa_info, dev->dev_addr);
+	SelectPage(0);
 }
 
 /****************
-- 
cgit v1.2.3


From 6e03718c852a7b2ce756e37ae340f4ebfec2f6f3 Mon Sep 17 00:00:00 2001
From: "kirjanov@gmail.com" <kirjanov@gmail.com>
Date: Fri, 19 Feb 2010 05:00:52 +0000
Subject: greth: some driver cleanups

On Fri, Feb 19, 2010 at 13:51 +0100, Jiri Pirko wrote:
>
> <snip>
> >>@@ -1031,7 +1029,7 @@ static void greth_set_multicast_list(struct net_device *dev)
> >> 			return;
> >> 		}
> >>
> >>-		if (dev->mc_count == 0) {
> >>+		if (!netdev_mc_count(dev)) {
> also please use netdev_mc_empty() here.
Some driver cleanups:
* convert to use phy_find_first/phy_direct_connect
* convert to use netdev_mc_* helpers
* fixed missing validate_addr hook
* removed netdev_priv castings

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/greth.c | 49 ++++++++++++++++++-------------------------------
 1 file changed, 18 insertions(+), 31 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 457da1c2383c..d2032339f6de 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -965,7 +965,7 @@ static int greth_set_mac_add(struct net_device *dev, void *p)
 	struct greth_private *greth;
 	struct greth_regs *regs;
 
-	greth = (struct greth_private *) netdev_priv(dev);
+	greth = netdev_priv(dev);
 	regs = (struct greth_regs *) greth->regs;
 
 	if (!is_valid_ether_addr(addr->sa_data))
@@ -988,20 +988,14 @@ static u32 greth_hash_get_index(__u8 *addr)
 static void greth_set_hash_filter(struct net_device *dev)
 {
 	struct dev_mc_list *curr;
-	struct greth_private *greth = (struct greth_private *) netdev_priv(dev);
+	struct greth_private *greth = netdev_priv(dev);
 	struct greth_regs *regs = (struct greth_regs *) greth->regs;
 	u32 mc_filter[2];
-	unsigned int i, bitnr;
+	unsigned int bitnr;
 
 	mc_filter[0] = mc_filter[1] = 0;
 
-	curr = dev->mc_list;
-
-	for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
-
-		if (!curr)
-			break;	/* unexpected end of list */
-
+	netdev_for_each_mc_addr(curr, dev) {
 		bitnr = greth_hash_get_index(curr->dmi_addr);
 		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
 	}
@@ -1031,7 +1025,7 @@ static void greth_set_multicast_list(struct net_device *dev)
 			return;
 		}
 
-		if (dev->mc_count == 0) {
+		if (netdev_mc_empty(dev)) {
 			cfg &= ~GRETH_CTRL_MCEN;
 			GRETH_REGSAVE(regs->control, cfg);
 			return;
@@ -1160,6 +1154,7 @@ static struct net_device_ops greth_netdev_ops = {
 	.ndo_stop = greth_close,
 	.ndo_start_xmit = greth_start_xmit,
 	.ndo_set_mac_address = greth_set_mac_add,
+	.ndo_validate_addr 	= eth_validate_addr,
 };
 
 static inline int wait_for_mdio(struct greth_private *greth)
@@ -1275,28 +1270,26 @@ static int greth_mdio_probe(struct net_device *dev)
 {
 	struct greth_private *greth = netdev_priv(dev);
 	struct phy_device *phy = NULL;
-	u32 interface;
-	int i;
+	int ret;
 
 	/* Find the first PHY */
-	for (i = 0; i < PHY_MAX_ADDR; i++) {
-		if (greth->mdio->phy_map[i]) {
-			phy = greth->mdio->phy_map[i];
-			break;
-		}
-	}
+	phy = phy_find_first(greth->mdio);
+
 	if (!phy) {
 		if (netif_msg_probe(greth))
 			dev_err(&dev->dev, "no PHY found\n");
 		return -ENXIO;
 	}
 
-	if (greth->gbit_mac)
-		interface = PHY_INTERFACE_MODE_GMII;
-	else
-		interface = PHY_INTERFACE_MODE_MII;
-
-	phy = phy_connect(dev, dev_name(&phy->dev), &greth_link_change, 0, interface);
+	ret = phy_connect_direct(dev, phy, &greth_link_change,
+			0, greth->gbit_mac ?
+			PHY_INTERFACE_MODE_GMII :
+			PHY_INTERFACE_MODE_MII);
+	if (ret) {
+		if (netif_msg_ifup(greth))
+			dev_err(&dev->dev, "could not attach to PHY\n");
+		return ret;
+	}
 
 	if (greth->gbit_mac)
 		phy->supported &= PHY_GBIT_FEATURES;
@@ -1305,12 +1298,6 @@ static int greth_mdio_probe(struct net_device *dev)
 
 	phy->advertising = phy->supported;
 
-	if (IS_ERR(phy)) {
-		if (netif_msg_ifup(greth))
-			dev_err(&dev->dev, "could not attach to PHY\n");
-		return PTR_ERR(phy);
-	}
-
 	greth->link = 0;
 	greth->speed = 0;
 	greth->duplex = -1;
-- 
cgit v1.2.3


From e4fc85600b1b4b8114354846ab9594ad354882d0 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 4 Feb 2010 18:57:42 +0000
Subject: mlx4: replace the dma_sync_single_range_for_cpu/device API

There are only two users of the dma_sync_single_range_for_cpu/device
API in mainline (mlx4 and ssb). The
dma_sync_single_range_for_cpu/device API has never been documented and
the dma_sync_single_for_cpu/device API also support a partial sync.

This converts mlx4 to use the dma_sync_single_for_cpu/device API
(preparations for the removal of the dma_sync_single_range_for_cpu/device API).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mlx4/en_rx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 829b9ec9ff67..64394647dddc 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -508,11 +508,11 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv,
 		/* We are copying all relevant data to the skb - temporarily
 		 * synch buffers for the copy */
 		dma = be64_to_cpu(rx_desc->data[0].addr);
-		dma_sync_single_range_for_cpu(&mdev->pdev->dev, dma, 0,
-					      length, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(&mdev->pdev->dev, dma, length,
+					DMA_FROM_DEVICE);
 		skb_copy_to_linear_data(skb, va, length);
-		dma_sync_single_range_for_device(&mdev->pdev->dev, dma, 0,
-						 length, DMA_FROM_DEVICE);
+		dma_sync_single_for_device(&mdev->pdev->dev, dma, length,
+					   DMA_FROM_DEVICE);
 		skb->tail += length;
 	} else {
 
-- 
cgit v1.2.3


From e0bf54c93a15c365a37cfc4fe0137f5bc012d1b9 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 19 Feb 2010 13:29:27 +0000
Subject: sfc: Fix sign of efx_mcdi_poll_reboot() error in efx_mcdi_poll()

efx_mcdi_poll() uses positive error numbers, matching the MCDI
protocol.  It must negate the result of efx_mcdi_poll_reboot() which
returns the usual negative error numbers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/mcdi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 9f035b9f0350..f66b3da6ddff 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -127,7 +127,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
 	efx_dword_t reg;
 
 	/* Check for a reboot atomically with respect to efx_mcdi_copyout() */
-	rc = efx_mcdi_poll_reboot(efx);
+	rc = -efx_mcdi_poll_reboot(efx);
 	if (rc)
 		goto out;
 
-- 
cgit v1.2.3


From 242cc0547f3bcecc0b02ca6f3e9512760185727e Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 19 Feb 2010 13:34:03 +0000
Subject: sfc: SFE4002/SFN4112F: Widen temperature and voltage tolerances

The temperature and voltage limits currently set on these boards are
too conservative and will cause the driver to stop the net device
erroneously in some systems.

Based on a review of the chip datasheets and advice from the designer
of these boards:

- Raise the maximum board temperatures to the specified maximum ambient
  temperatures for their PHYs plus the expected temperature bias of the
  board
- Raise the maximum controller temperature to 90 degrees
- Lower the minimum temperatures to 0 degrees
- Widen the voltage tolerances to at least +/- 10%

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/falcon_boards.c | 45 ++++++++++++++++++++++++-----------------
 1 file changed, 27 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
index bf0b96af5334..5712fddd72f2 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/sfc/falcon_boards.c
@@ -29,6 +29,15 @@
 #define FALCON_BOARD_SFN4111T 0x51
 #define FALCON_BOARD_SFN4112F 0x52
 
+/* Board temperature is about 15°C above ambient when air flow is
+ * limited. */
+#define FALCON_BOARD_TEMP_BIAS	15
+
+/* SFC4000 datasheet says: 'The maximum permitted junction temperature
+ * is 125°C; the thermal design of the environment for the SFC4000
+ * should aim to keep this well below 100°C.' */
+#define FALCON_JUNC_TEMP_MAX	90
+
 /*****************************************************************************
  * Support for LM87 sensor chip used on several boards
  */
@@ -548,16 +557,16 @@ fail_hwmon:
 static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
 
 static const u8 sfe4002_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(3, 0xac, 0xd4),		/* 5V:    5.0V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_AIN_LIMITS(0, 0x98, 0xbb),		/* AIN1:  1.66V +/- 10% */
+	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS),
+	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
 	0
 };
 
@@ -619,14 +628,14 @@ static int sfe4002_init(struct efx_nic *efx)
 static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
 
 static const u8 sfn4112f_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS),
+	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
 	0
 };
 
-- 
cgit v1.2.3


From 353176888386d9025062a12dcec08d49af10cf2c Mon Sep 17 00:00:00 2001
From: Robert Hancock <hancockrwd@gmail.com>
Date: Fri, 19 Feb 2010 17:10:15 -0800
Subject: r8169: enable 64-bit DMA by default for PCI Express devices (v2)

Currently use of 64-bit DMA is disabled in r8169 unless the user passes the
use_dac module option. This is reasonable for conventional PCI devices where
broken chipsets may not handle dual-address-cycle transfers properly for
32-bit slots and so this may not be safe. However, PCI Express should not have
this problem and not using 64-bit DMA results in DMA transfers needlessly using
the IOMMU or SWIOTLB. Set the use_dac module parameter to a new default value of
-1 which results in 64-bit DMA being enabled by default for PCI Express devices
only.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 616ae5aa66aa..83965eeba456 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -187,7 +187,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
 MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
 
 static int rx_copybreak = 200;
-static int use_dac;
+static int use_dac = -1;
 static struct {
 	u32 msg_enable;
 } debug = { -1 };
@@ -511,7 +511,8 @@ MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
 module_param(rx_copybreak, int, 0);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 module_param(use_dac, int, 0);
-MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
+MODULE_PARM_DESC(use_dac, "Enable PCI DAC. -1 defaults on for PCI Express only."
+" Unsafe on 32 bit PCI slot.");
 module_param_named(debug, debug.msg_enable, int, 0);
 MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
 MODULE_LICENSE("GPL");
@@ -2973,6 +2974,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *ioaddr;
 	unsigned int i;
 	int rc;
+	int this_use_dac = use_dac;
 
 	if (netif_msg_drv(&debug)) {
 		printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
@@ -3038,8 +3040,17 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	tp->cp_cmd = PCIMulRW | RxChkSum;
 
+	tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+	if (!tp->pcie_cap)
+		netif_info(tp, probe, dev, "no PCI Express capability\n");
+
+	if (this_use_dac < 0)
+		this_use_dac = tp->pcie_cap != 0;
+
 	if ((sizeof(dma_addr_t) > 4) &&
-	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
+	    this_use_dac &&
+	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		netif_info(tp, probe, dev, "using 64-bit DMA\n");
 		tp->cp_cmd |= PCIDAC;
 		dev->features |= NETIF_F_HIGHDMA;
 	} else {
@@ -3058,10 +3069,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_free_res_4;
 	}
 
-	tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	if (!tp->pcie_cap)
-		netif_info(tp, probe, dev, "no PCI Express capability\n");
-
 	RTL_W16(IntrMask, 0x0000);
 
 	/* Soft reset the chip. */
-- 
cgit v1.2.3


From 294aedcf875b982e2d3bd6d2d9b8124ccb163bf6 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Fri, 19 Feb 2010 13:54:58 +0000
Subject: be2net: update copyright dates

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h         | 2 +-
 drivers/net/benet/be_cmds.c    | 2 +-
 drivers/net/benet/be_cmds.h    | 2 +-
 drivers/net/benet/be_ethtool.c | 2 +-
 drivers/net/benet/be_hw.h      | 2 +-
 drivers/net/benet/be_main.c    | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 2734a41a4627..e3a466545d4e 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index d7546b450505..ee16b374e02c 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 01501dbae00a..3464924d6c28 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index dcc7f37b5428..9560d48944ab 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index bb2ae6f924db..5ffb149181ad 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 545c8417fc26..f66704460876 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2009 ServerEngines
+ * Copyright (C) 2005 - 2010 ServerEngines
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
-- 
cgit v1.2.3


From 91992e446cadbbde1a304de6954afd715af5121e Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Fri, 19 Feb 2010 13:57:12 +0000
Subject: be2net: Maintain tx and rx counters in driver

For certain skews of the BE adapter, H/W Tx and Rx
counters could be common for more than one interface.
Add Tx and Rx counters in the adapter structure
(to maintain stats on a per interfae basis).

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      |  2 ++
 drivers/net/benet/be_main.c | 18 +++++++++---------
 2 files changed, 11 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index e3a466545d4e..42c7a2bb844f 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -164,6 +164,7 @@ struct be_drvr_stats {
 	ulong be_tx_jiffies;
 	u64 be_tx_bytes;
 	u64 be_tx_bytes_prev;
+	u64 be_tx_pkts;
 	u32 be_tx_rate;
 
 	u32 cache_barrier[16];
@@ -175,6 +176,7 @@ struct be_drvr_stats {
 	ulong be_rx_jiffies;
 	u64 be_rx_bytes;
 	u64 be_rx_bytes_prev;
+	u64 be_rx_pkts;
 	u32 be_rx_rate;
 	/* number of non ether type II frames dropped where
 	 * frame len > length field of Mac Hdr */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index f66704460876..de0830e14aa5 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -159,13 +159,10 @@ void netdev_stats_update(struct be_adapter *adapter)
 	struct net_device_stats *dev_stats = &adapter->netdev->stats;
 	struct be_erx_stats *erx_stats = &hw_stats->erx;
 
-	dev_stats->rx_packets = port_stats->rx_total_frames;
-	dev_stats->tx_packets = port_stats->tx_unicastframes +
-		port_stats->tx_multicastframes + port_stats->tx_broadcastframes;
-	dev_stats->rx_bytes = (u64) port_stats->rx_bytes_msd << 32 |
-				(u64) port_stats->rx_bytes_lsd;
-	dev_stats->tx_bytes = (u64) port_stats->tx_bytes_msd << 32 |
-				(u64) port_stats->tx_bytes_lsd;
+	dev_stats->rx_packets = drvr_stats(adapter)->be_rx_pkts;
+	dev_stats->tx_packets = drvr_stats(adapter)->be_tx_pkts;
+	dev_stats->rx_bytes = drvr_stats(adapter)->be_rx_bytes;
+	dev_stats->tx_bytes = drvr_stats(adapter)->be_tx_bytes;
 
 	/* bad pkts received */
 	dev_stats->rx_errors = port_stats->rx_crc_errors +
@@ -322,12 +319,13 @@ static void be_tx_rate_update(struct be_adapter *adapter)
 }
 
 static void be_tx_stats_update(struct be_adapter *adapter,
-			u32 wrb_cnt, u32 copied, bool stopped)
+			u32 wrb_cnt, u32 copied, u32 gso_segs, bool stopped)
 {
 	struct be_drvr_stats *stats = drvr_stats(adapter);
 	stats->be_tx_reqs++;
 	stats->be_tx_wrbs += wrb_cnt;
 	stats->be_tx_bytes += copied;
+	stats->be_tx_pkts += (gso_segs ? gso_segs : 1);
 	if (stopped)
 		stats->be_tx_stops++;
 }
@@ -472,7 +470,8 @@ static netdev_tx_t be_xmit(struct sk_buff *skb,
 
 		be_txq_notify(adapter, txq->id, wrb_cnt);
 
-		be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
+		be_tx_stats_update(adapter, wrb_cnt, copied,
+				skb_shinfo(skb)->gso_segs, stopped);
 	} else {
 		txq->head = start;
 		dev_kfree_skb_any(skb);
@@ -619,6 +618,7 @@ static void be_rx_stats_update(struct be_adapter *adapter,
 	stats->be_rx_compl++;
 	stats->be_rx_frags += numfrags;
 	stats->be_rx_bytes += pktsize;
+	stats->be_rx_pkts++;
 }
 
 static inline bool do_pkt_csum(struct be_eth_rx_compl *rxcp, bool cso)
-- 
cgit v1.2.3


From 9772a43170854ec98b53b054bce9b6476f260d00 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Fri, 19 Feb 2010 13:58:21 +0000
Subject: be2net: Bump the driver version number

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 42c7a2bb844f..be81fb2d10f7 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -32,7 +32,7 @@
 
 #include "be_hw.h"
 
-#define DRV_VER			"2.101.346u"
+#define DRV_VER			"2.102.147u"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
 #define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
-- 
cgit v1.2.3


From 06c92ee6384c33dbb6e313c66272181db70abbb0 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sat, 20 Feb 2010 18:48:25 -0800
Subject: eepro: fix netdev_mc_count conversion

Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when
appropriate)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/eepro.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 488bc13cc7e6..5f73ab22db16 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1288,7 +1288,7 @@ set_multicast_list(struct net_device *dev)
 	short ioaddr = dev->base_addr;
 	unsigned short mode;
 	struct dev_mc_list *dmi=dev->mc_list;
-	int mc_count = mc_count;
+	int mc_count = netdev_mc_count(dev);
 
 	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63)
 	{
-- 
cgit v1.2.3


From a239a8b47cc0e5e6d7416a89f340beac06d5edaa Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 19 Feb 2010 15:47:32 -0800
Subject: iwlwifi: error checking for number of tfds in queue

When receive reply_tx and ready to decrement the count for number of
tfds in queue, do error checking to prevent error condition and
tfds_in_queue become negative number.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c |  2 +-
 drivers/net/wireless/iwlwifi/iwl-5000.c |  4 ++--
 drivers/net/wireless/iwlwifi/iwl-core.h |  2 ++
 drivers/net/wireless/iwlwifi/iwl-tx.c   | 16 +++++++++++++++-
 4 files changed, 20 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 9b4b8b5c7574..31462813bac0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2008,7 +2008,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 			IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
 					   "%d index %d\n", scd_ssn , index);
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index de45f308b744..f27c514886a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1125,7 +1125,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 					scd_ssn , index, txq_id, txq->swq_id);
 
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
@@ -1154,7 +1154,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 
 		freed = iwl_tx_queue_reclaim(priv, txq_id, index);
 		if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 675b7df632fc..fe37d6a6bf97 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -446,6 +446,8 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv);
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 			 struct iwl_tx_queue *txq);
 int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+			    int sta_id, int tid, int freed);
 int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 		      int slots_num, u32 txq_id);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 87ce2bd292c7..72136c8f51da 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -120,6 +120,20 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 EXPORT_SYMBOL(iwl_txq_update_write_ptr);
 
 
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+			    int sta_id, int tid, int freed)
+{
+	if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+	else {
+		IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n",
+			priv->stations[sta_id].tid[tid].tfds_in_queue,
+			freed);
+		priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
+	}
+}
+EXPORT_SYMBOL(iwl_free_tfds_in_queue);
+
 /**
  * iwl_tx_queue_free - Deallocate DMA queue.
  * @txq: Transmit queue to deallocate.
@@ -1559,7 +1573,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 	if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
 		/* calculate mac80211 ampdu sw queue to wake */
 		int freed = iwl_tx_queue_reclaim(priv, scd_flow, index);
-		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 		    priv->mac80211_registered &&
-- 
cgit v1.2.3


From a120e912eb51e347f36c71b60a1d13af74d30e83 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Fri, 19 Feb 2010 15:47:33 -0800
Subject: iwlwifi: sanity check before counting number of tfds can be free

Check the frame control for ieee80211_is_data_qos() is true before
counting the number of tfds can be free, the tfds_in_queue only
increment when ieee80211_is_data_qos() is true before transmit; so it
should only decrement if the type match.

Remove ieee80211_is_data_qos check for frame_ctrl in tx_resp to avoid
invalid information pass from uCode.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-5000.c | 6 ++----
 drivers/net/wireless/iwlwifi/iwl-tx.c   | 6 +++++-
 2 files changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index f27c514886a5..cffaae772d51 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1153,16 +1153,14 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 				   tx_resp->failure_frame);
 
 		freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-		if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
 			iwl_wake_queue(priv, txq_id);
 	}
 
-	if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-		iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+	iwl_txq_check_empty(priv, sta_id, tid, txq_id);
 
 	if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
 		IWL_ERR(priv, "TODO:  Implement Tx ABORT REQUIRED!!!\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 72136c8f51da..8f4071562857 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1145,6 +1145,7 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 	struct iwl_queue *q = &txq->q;
 	struct iwl_tx_info *tx_info;
 	int nfreed = 0;
+	struct ieee80211_hdr *hdr;
 
 	if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
 		IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
@@ -1159,13 +1160,16 @@ int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 
 		tx_info = &txq->txb[txq->q.read_ptr];
 		iwl_tx_status(priv, tx_info->skb[0]);
+
+		hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data;
+		if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+			nfreed++;
 		tx_info->skb[0] = NULL;
 
 		if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
 			priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
 
 		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
-		nfreed++;
 	}
 	return nfreed;
 }
-- 
cgit v1.2.3


From 4a6967b88af02eebeedfbb91bc09160750225bb5 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 19 Feb 2010 19:18:37 +0100
Subject: mwl8k: convert to new station add/remove callbacks

This converts mwl8k to use the new station
add/remove callbacks instead of using the
old sta_notify callback.

The new callbacks can sleep, so a lot of
code can be removed now.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 106 +++++++++----------------------------------
 1 file changed, 22 insertions(+), 84 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 6497c841fb21..ac65e13eb0de 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -188,10 +188,6 @@ struct mwl8k_priv {
 	bool sniffer_enabled;
 	bool wmm_enabled;
 
-	struct work_struct sta_notify_worker;
-	spinlock_t sta_notify_list_lock;
-	struct list_head sta_notify_list;
-
 	/* XXX need to convert this to handle multiple interfaces */
 	bool capture_beacon;
 	u8 capture_bssid[ETH_ALEN];
@@ -3706,90 +3702,36 @@ static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 	return mwl8k_cmd_set_rts_threshold(hw, value);
 }
 
-struct mwl8k_sta_notify_item
-{
-	struct list_head list;
-	struct ieee80211_vif *vif;
-	enum sta_notify_cmd cmd;
-	struct ieee80211_sta sta;
-};
-
-static void
-mwl8k_do_sta_notify(struct ieee80211_hw *hw, struct mwl8k_sta_notify_item *s)
+static int mwl8k_sta_remove(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta)
 {
 	struct mwl8k_priv *priv = hw->priv;
 
-	/*
-	 * STA firmware uses UPDATE_STADB, AP firmware uses SET_NEW_STN.
-	 */
-	if (!priv->ap_fw && s->cmd == STA_NOTIFY_ADD) {
-		int rc;
-
-		rc = mwl8k_cmd_update_stadb_add(hw, s->vif, &s->sta);
-		if (rc >= 0) {
-			struct ieee80211_sta *sta;
-
-			rcu_read_lock();
-			sta = ieee80211_find_sta(s->vif, s->sta.addr);
-			if (sta != NULL)
-				MWL8K_STA(sta)->peer_id = rc;
-			rcu_read_unlock();
-		}
-	} else if (!priv->ap_fw && s->cmd == STA_NOTIFY_REMOVE) {
-		mwl8k_cmd_update_stadb_del(hw, s->vif, s->sta.addr);
-	} else if (priv->ap_fw && s->cmd == STA_NOTIFY_ADD) {
-		mwl8k_cmd_set_new_stn_add(hw, s->vif, &s->sta);
-	} else if (priv->ap_fw && s->cmd == STA_NOTIFY_REMOVE) {
-		mwl8k_cmd_set_new_stn_del(hw, s->vif, s->sta.addr);
-	}
-}
-
-static void mwl8k_sta_notify_worker(struct work_struct *work)
-{
-	struct mwl8k_priv *priv =
-		container_of(work, struct mwl8k_priv, sta_notify_worker);
-	struct ieee80211_hw *hw = priv->hw;
-
-	spin_lock_bh(&priv->sta_notify_list_lock);
-	while (!list_empty(&priv->sta_notify_list)) {
-		struct mwl8k_sta_notify_item *s;
-
-		s = list_entry(priv->sta_notify_list.next,
-			       struct mwl8k_sta_notify_item, list);
-		list_del(&s->list);
-
-		spin_unlock_bh(&priv->sta_notify_list_lock);
-
-		mwl8k_do_sta_notify(hw, s);
-		kfree(s);
-
-		spin_lock_bh(&priv->sta_notify_list_lock);
-	}
-	spin_unlock_bh(&priv->sta_notify_list_lock);
+	if (priv->ap_fw)
+		return mwl8k_cmd_set_new_stn_del(hw, vif, sta->addr);
+	else
+		return mwl8k_cmd_update_stadb_del(hw, vif, sta->addr);
 }
 
-static void
-mwl8k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-		 enum sta_notify_cmd cmd, struct ieee80211_sta *sta)
+static int mwl8k_sta_add(struct ieee80211_hw *hw,
+			 struct ieee80211_vif *vif,
+			 struct ieee80211_sta *sta)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_sta_notify_item *s;
-
-	if (cmd != STA_NOTIFY_ADD && cmd != STA_NOTIFY_REMOVE)
-		return;
-
-	s = kmalloc(sizeof(*s), GFP_ATOMIC);
-	if (s != NULL) {
-		s->vif = vif;
-		s->cmd = cmd;
-		s->sta = *sta;
+	int ret;
 
-		spin_lock_bh(&priv->sta_notify_list_lock);
-		list_add_tail(&s->list, &priv->sta_notify_list);
-		spin_unlock_bh(&priv->sta_notify_list_lock);
+	if (!priv->ap_fw) {
+		ret = mwl8k_cmd_update_stadb_add(hw, vif, sta);
+		if (ret >= 0) {
+			MWL8K_STA(sta)->peer_id = ret;
+			return 0;
+		}
 
-		ieee80211_queue_work(hw, &priv->sta_notify_worker);
+		return ret;
 	}
+
+	return mwl8k_cmd_set_new_stn_add(hw, vif, sta);
 }
 
 static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
@@ -3849,7 +3791,8 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.prepare_multicast	= mwl8k_prepare_multicast,
 	.configure_filter	= mwl8k_configure_filter,
 	.set_rts_threshold	= mwl8k_set_rts_threshold,
-	.sta_notify		= mwl8k_sta_notify,
+	.sta_add		= mwl8k_sta_add,
+	.sta_remove		= mwl8k_sta_remove,
 	.conf_tx		= mwl8k_conf_tx,
 	.get_stats		= mwl8k_get_stats,
 	.ampdu_action		= mwl8k_ampdu_action,
@@ -4051,11 +3994,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	priv->radio_on = 0;
 	priv->radio_short_preamble = 0;
 
-	/* Station database handling */
-	INIT_WORK(&priv->sta_notify_worker, mwl8k_sta_notify_worker);
-	spin_lock_init(&priv->sta_notify_list_lock);
-	INIT_LIST_HEAD(&priv->sta_notify_list);
-
 	/* Finalize join worker */
 	INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
 
-- 
cgit v1.2.3


From 3c945e5b3719bcc18c6ddd31bbcae8ef94f3d19a Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Fri, 19 Feb 2010 17:44:42 +0000
Subject: ixgbe: prevent speculative processing of descriptors before ready

The PowerPC architecture does not require loads to independent bytes to be
ordered without adding an explicit barrier.

In ixgbe_clean_rx_irq we load the status bit then load the packet data.
With packet split disabled if these loads go out of order we get a
stale packet, but we will notice the bad sequence numbers and drop it.

The problem occurs with packet split enabled where the TCP/IP header and data
are in different descriptors. If the reads go out of order we may have data
that doesn't match the TCP/IP header. Since we use hardware checksumming this
bad data is never verified and it makes it all the way to the application.

This bug was found during stress testing and adding this barrier has been shown
to fix it.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 43a8de3dc4d6..330879004ea1 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -849,6 +849,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			break;
 		(*work_done)++;
 
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 		if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
 			hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
 			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
-- 
cgit v1.2.3


From 8850dce170b460d9e46a827a62d6d7bb7e7cfcf3 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 20 Feb 2010 10:55:25 +0000
Subject: b44: Set PHY address to NO_PHY if reset fails.

Do a PHY reset to test if there is an active phy and set the PHY address
to B44_PHY_ADDR_NO_PHY in case of an not active phy. This is needed for
the Linksys WRTSL54GS and Asus WL-500W.
This patch was used in OpenWRT for a long time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/b44.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 180510ed92a5..71fa0bee8d36 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -338,7 +338,7 @@ static int b44_phy_reset(struct b44 *bp)
 		}
 	}
 
-	return 0;
+	return err;
 }
 
 static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
@@ -2215,6 +2215,10 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 	 */
 	b44_chip_reset(bp, B44_CHIP_RESET_FULL);
 
+	/* do a phy reset to test if there is an active phy */
+	if (b44_phy_reset(bp) < 0)
+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+
 	netdev_info(dev, "Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
 		    dev->dev_addr);
 
-- 
cgit v1.2.3


From 53639207c032ec63dac3661af94447f9774cd40b Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 20 Feb 2010 10:55:26 +0000
Subject: b44: use netdev_alloc_skb instead of dev_alloc_skb

The conversion in bf0dcbd929faf036f1a4f2918090344d0e249cf5 missed the
new allocation in b44_rx.
This patch was used in OpenWRT for a long time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/b44.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 71fa0bee8d36..bcb6a029a0a8 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -809,7 +809,7 @@ static int b44_rx(struct b44 *bp, int budget)
 			struct sk_buff *copy_skb;
 
 			b44_recycle_rx(bp, cons, bp->rx_prod);
-			copy_skb = dev_alloc_skb(len + 2);
+			copy_skb = netdev_alloc_skb(bp->dev, len + 2);
 			if (copy_skb == NULL)
 				goto drop_it_no_recycle;
 
-- 
cgit v1.2.3


From 0bc88e4af07621bc4b84477374745d01a470e85d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 21 Feb 2010 17:08:47 +0000
Subject: drivers/net/typhoon.c: Use (pr|netdev)_<level> macro helpers

David Dillow took my suggestions and improved on them.
Here is this latest version.

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Remove #define ERR_PFX
Remove now unused member name from struct typhoon
Use pr_<level>
Use netdev_<level>
Coalesce long formats
Remove version information

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/typhoon.c | 243 ++++++++++++++++++++------------------------------
 1 file changed, 96 insertions(+), 147 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index edabc49a49bc..38c216132ef5 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -98,14 +98,10 @@ static const int multicast_filter_limit = 32;
 #define TX_TIMEOUT  (2*HZ)
 
 #define PKT_BUF_SZ		1536
-
-#define DRV_MODULE_NAME		"typhoon"
-#define DRV_MODULE_VERSION 	"1.5.9"
-#define DRV_MODULE_RELDATE	"Mar 2, 2009"
-#define PFX			DRV_MODULE_NAME ": "
-#define ERR_PFX			KERN_ERR PFX
 #define FIRMWARE_NAME		"3com/typhoon.bin"
 
+#define pr_fmt(fmt)		KBUILD_MODNAME " " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -132,14 +128,12 @@ static const int multicast_filter_limit = 32;
 #include <linux/in6.h>
 #include <linux/dma-mapping.h>
 #include <linux/firmware.h>
+#include <generated/utsrelease.h>
 
 #include "typhoon.h"
 
-static char version[] __devinitdata =
-    "typhoon.c: version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-
 MODULE_AUTHOR("David Dillow <dave@thedillows.org>");
-MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_VERSION(UTS_RELEASE);
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE(FIRMWARE_NAME);
 MODULE_DESCRIPTION("3Com Typhoon Family (3C990, 3CR990, and variants)");
@@ -161,8 +155,8 @@ module_param(use_mmio, int, 0);
 #endif
 
 struct typhoon_card_info {
-	char *name;
-	int capabilities;
+	const char *name;
+	const int capabilities;
 };
 
 #define TYPHOON_CRYPTO_NONE		0x00
@@ -299,7 +293,6 @@ struct typhoon {
 	struct basic_ring	respRing;
 	struct net_device_stats	stats;
 	struct net_device_stats	stats_saved;
-	const char *		name;
 	struct typhoon_shared *	shared;
 	dma_addr_t		shared_dma;
 	__le16			xcvr_select;
@@ -534,13 +527,13 @@ typhoon_process_response(struct typhoon *tp, int resp_size,
 		} else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
 			typhoon_hello(tp);
 		} else {
-			printk(KERN_ERR "%s: dumping unexpected response "
-			       "0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
-			       tp->name, le16_to_cpu(resp->cmd),
-			       resp->numDesc, resp->flags,
-			       le16_to_cpu(resp->parm1),
-			       le32_to_cpu(resp->parm2),
-			       le32_to_cpu(resp->parm3));
+			netdev_err(tp->dev,
+				   "dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+				   le16_to_cpu(resp->cmd),
+				   resp->numDesc, resp->flags,
+				   le16_to_cpu(resp->parm1),
+				   le32_to_cpu(resp->parm2),
+				   le32_to_cpu(resp->parm3));
 		}
 
 cleanup:
@@ -606,9 +599,8 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
 	freeResp = typhoon_num_free_resp(tp);
 
 	if(freeCmd < num_cmd || freeResp < num_resp) {
-		printk("%s: no descs for cmd, had (needed) %d (%d) cmd, "
-			"%d (%d) resp\n", tp->name, freeCmd, num_cmd,
-			freeResp, num_resp);
+		netdev_err(tp->dev, "no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+			   freeCmd, num_cmd, freeResp, num_resp);
 		err = -ENOMEM;
 		goto out;
 	}
@@ -733,7 +725,7 @@ typhoon_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
 		spin_unlock_bh(&tp->state_lock);
 		err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
 		if(err < 0)
-			printk("%s: vlan offload error %d\n", tp->name, -err);
+			netdev_err(tp->dev, "vlan offload error %d\n", -err);
 		spin_lock_bh(&tp->state_lock);
 	}
 
@@ -1021,7 +1013,7 @@ typhoon_get_stats(struct net_device *dev)
 		return saved;
 
 	if(typhoon_do_get_stats(tp) < 0) {
-		printk(KERN_ERR "%s: error getting stats\n", dev->name);
+		netdev_err(dev, "error getting stats\n");
 		return saved;
 	}
 
@@ -1063,8 +1055,8 @@ typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 		}
 	}
 
-	strcpy(info->driver, DRV_MODULE_NAME);
-	strcpy(info->version, DRV_MODULE_VERSION);
+	strcpy(info->driver, KBUILD_MODNAME);
+	strcpy(info->version, UTS_RELEASE);
 	strcpy(info->bus_info, pci_name(pci_dev));
 }
 
@@ -1366,8 +1358,8 @@ typhoon_request_firmware(struct typhoon *tp)
 
 	err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev);
 	if (err) {
-		printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
-				tp->name, FIRMWARE_NAME);
+		netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+			   FIRMWARE_NAME);
 		return err;
 	}
 
@@ -1402,7 +1394,7 @@ typhoon_request_firmware(struct typhoon *tp)
 	return 0;
 
 invalid_fw:
-	printk(KERN_ERR "%s: Invalid firmware image\n", tp->name);
+	netdev_err(tp->dev, "Invalid firmware image\n");
 	release_firmware(typhoon_fw);
 	typhoon_fw = NULL;
 	return -EINVAL;
@@ -1439,7 +1431,7 @@ typhoon_download_firmware(struct typhoon *tp)
 	err = -ENOMEM;
 	dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma);
 	if(!dpage) {
-		printk(KERN_ERR "%s: no DMA mem for firmware\n", tp->name);
+		netdev_err(tp->dev, "no DMA mem for firmware\n");
 		goto err_out;
 	}
 
@@ -1452,7 +1444,7 @@ typhoon_download_firmware(struct typhoon *tp)
 
 	err = -ETIMEDOUT;
 	if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
-		printk(KERN_ERR "%s: card ready timeout\n", tp->name);
+		netdev_err(tp->dev, "card ready timeout\n");
 		goto err_out_irq;
 	}
 
@@ -1492,8 +1484,7 @@ typhoon_download_firmware(struct typhoon *tp)
 			if(typhoon_wait_interrupt(ioaddr) < 0 ||
 			   ioread32(ioaddr + TYPHOON_REG_STATUS) !=
 			   TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
-				printk(KERN_ERR "%s: segment ready timeout\n",
-				       tp->name);
+				netdev_err(tp->dev, "segment ready timeout\n");
 				goto err_out_irq;
 			}
 
@@ -1503,8 +1494,8 @@ typhoon_download_firmware(struct typhoon *tp)
 			 * the checksum, we can do this once, at the end.
 			 */
 			csum = csum_fold(csum_partial_copy_nocheck(image_data,
-								  dpage, len,
-								  0));
+								   dpage, len,
+								   0));
 
 			iowrite32(len, ioaddr + TYPHOON_REG_BOOT_LENGTH);
 			iowrite32(le16_to_cpu((__force __le16)csum),
@@ -1515,7 +1506,7 @@ typhoon_download_firmware(struct typhoon *tp)
 			iowrite32(dpage_dma, ioaddr + TYPHOON_REG_BOOT_DATA_LO);
 			typhoon_post_pci_writes(ioaddr);
 			iowrite32(TYPHOON_BOOTCMD_SEG_AVAILABLE,
-			       ioaddr + TYPHOON_REG_COMMAND);
+					ioaddr + TYPHOON_REG_COMMAND);
 
 			image_data += len;
 			load_addr += len;
@@ -1526,15 +1517,15 @@ typhoon_download_firmware(struct typhoon *tp)
 	if(typhoon_wait_interrupt(ioaddr) < 0 ||
 	   ioread32(ioaddr + TYPHOON_REG_STATUS) !=
 	   TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
-		printk(KERN_ERR "%s: final segment ready timeout\n", tp->name);
+		netdev_err(tp->dev, "final segment ready timeout\n");
 		goto err_out_irq;
 	}
 
 	iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
 
 	if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
-		printk(KERN_ERR "%s: boot ready timeout, status 0x%0x\n",
-		       tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+		netdev_err(tp->dev, "boot ready timeout, status 0x%0x\n",
+			   ioread32(ioaddr + TYPHOON_REG_STATUS));
 		goto err_out_irq;
 	}
 
@@ -1556,7 +1547,7 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
 	void __iomem *ioaddr = tp->ioaddr;
 
 	if(typhoon_wait_status(ioaddr, initial_status) < 0) {
-		printk(KERN_ERR "%s: boot ready timeout\n", tp->name);
+		netdev_err(tp->dev, "boot ready timeout\n");
 		goto out_timeout;
 	}
 
@@ -1567,8 +1558,8 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
 				ioaddr + TYPHOON_REG_COMMAND);
 
 	if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
-		printk(KERN_ERR "%s: boot finish timeout (status 0x%x)\n",
-		       tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+		netdev_err(tp->dev, "boot finish timeout (status 0x%x)\n",
+			   ioread32(ioaddr + TYPHOON_REG_STATUS));
 		goto out_timeout;
 	}
 
@@ -1867,8 +1858,7 @@ typhoon_interrupt(int irq, void *dev_instance)
 		typhoon_post_pci_writes(ioaddr);
 		__napi_schedule(&tp->napi);
 	} else {
-		printk(KERN_ERR "%s: Error, poll already scheduled\n",
-                       dev->name);
+		netdev_err(dev, "Error, poll already scheduled\n");
 	}
 	return IRQ_HANDLED;
 }
@@ -1901,16 +1891,15 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
 	xp_cmd.parm1 = events;
 	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
 	if(err < 0) {
-		printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
-				tp->name, err);
+		netdev_err(tp->dev, "typhoon_sleep(): wake events cmd err %d\n",
+			   err);
 		return err;
 	}
 
 	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
 	err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
 	if(err < 0) {
-		printk(KERN_ERR "%s: typhoon_sleep(): sleep cmd err %d\n",
-				tp->name, err);
+		netdev_err(tp->dev, "typhoon_sleep(): sleep cmd err %d\n", err);
 		return err;
 	}
 
@@ -1961,12 +1950,12 @@ typhoon_start_runtime(struct typhoon *tp)
 
 	err = typhoon_download_firmware(tp);
 	if(err < 0) {
-		printk("%s: cannot load runtime on 3XP\n", tp->name);
+		netdev_err(tp->dev, "cannot load runtime on 3XP\n");
 		goto error_out;
 	}
 
 	if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
-		printk("%s: cannot boot 3XP\n", tp->name);
+		netdev_err(tp->dev, "cannot boot 3XP\n");
 		err = -EIO;
 		goto error_out;
 	}
@@ -2070,9 +2059,7 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
 	}
 
 	if(i == TYPHOON_WAIT_TIMEOUT)
-		printk(KERN_ERR
-		       "%s: halt timed out waiting for Tx to complete\n",
-		       tp->name);
+		netdev_err(tp->dev, "halt timed out waiting for Tx to complete\n");
 
 	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
 	typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
@@ -2089,11 +2076,10 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
 	typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
 
 	if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
-		printk(KERN_ERR "%s: timed out waiting for 3XP to halt\n",
-		       tp->name);
+		netdev_err(tp->dev, "timed out waiting for 3XP to halt\n");
 
 	if(typhoon_reset(ioaddr, wait_type) < 0) {
-		printk(KERN_ERR "%s: unable to reset 3XP\n", tp->name);
+		netdev_err(tp->dev, "unable to reset 3XP\n");
 		return -ETIMEDOUT;
 	}
 
@@ -2112,8 +2098,7 @@ typhoon_tx_timeout(struct net_device *dev)
 	struct typhoon *tp = netdev_priv(dev);
 
 	if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
-		printk(KERN_WARNING "%s: could not reset in tx timeout\n",
-					dev->name);
+		netdev_warn(dev, "could not reset in tx timeout\n");
 		goto truely_dead;
 	}
 
@@ -2122,8 +2107,7 @@ typhoon_tx_timeout(struct net_device *dev)
 	typhoon_free_rx_rings(tp);
 
 	if(typhoon_start_runtime(tp) < 0) {
-		printk(KERN_ERR "%s: could not start runtime in tx timeout\n",
-					dev->name);
+		netdev_err(dev, "could not start runtime in tx timeout\n");
 		goto truely_dead;
         }
 
@@ -2148,7 +2132,7 @@ typhoon_open(struct net_device *dev)
 
 	err = typhoon_wakeup(tp, WaitSleep);
 	if(err < 0) {
-		printk(KERN_ERR "%s: unable to wakeup device\n", dev->name);
+		netdev_err(dev, "unable to wakeup device\n");
 		goto out_sleep;
 	}
 
@@ -2173,14 +2157,13 @@ out_irq:
 
 out_sleep:
 	if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
-		printk(KERN_ERR "%s: unable to reboot into sleep img\n",
-				dev->name);
+		netdev_err(dev, "unable to reboot into sleep img\n");
 		typhoon_reset(tp->ioaddr, NoWait);
 		goto out;
 	}
 
 	if(typhoon_sleep(tp, PCI_D3hot, 0) < 0)
-		printk(KERN_ERR "%s: unable to go back to sleep\n", dev->name);
+		netdev_err(dev, "unable to go back to sleep\n");
 
 out:
 	return err;
@@ -2195,7 +2178,7 @@ typhoon_close(struct net_device *dev)
 	napi_disable(&tp->napi);
 
 	if(typhoon_stop_runtime(tp, WaitSleep) < 0)
-		printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
+		netdev_err(dev, "unable to stop runtime\n");
 
 	/* Make sure there is no irq handler running on a different CPU. */
 	free_irq(dev->irq, dev);
@@ -2204,10 +2187,10 @@ typhoon_close(struct net_device *dev)
 	typhoon_init_rings(tp);
 
 	if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0)
-		printk(KERN_ERR "%s: unable to boot sleep image\n", dev->name);
+		netdev_err(dev, "unable to boot sleep image\n");
 
 	if(typhoon_sleep(tp, PCI_D3hot, 0) < 0)
-		printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
+		netdev_err(dev, "unable to put card to sleep\n");
 
 	return 0;
 }
@@ -2225,14 +2208,12 @@ typhoon_resume(struct pci_dev *pdev)
 		return 0;
 
 	if(typhoon_wakeup(tp, WaitNoSleep) < 0) {
-		printk(KERN_ERR "%s: critical: could not wake up in resume\n",
-				dev->name);
+		netdev_err(dev, "critical: could not wake up in resume\n");
 		goto reset;
 	}
 
 	if(typhoon_start_runtime(tp) < 0) {
-		printk(KERN_ERR "%s: critical: could not start runtime in "
-				"resume\n", dev->name);
+		netdev_err(dev, "critical: could not start runtime in resume\n");
 		goto reset;
 	}
 
@@ -2259,8 +2240,7 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
 	spin_lock_bh(&tp->state_lock);
 	if(tp->vlgrp && tp->wol_events & TYPHOON_WAKE_MAGIC_PKT) {
 		spin_unlock_bh(&tp->state_lock);
-		printk(KERN_ERR "%s: cannot do WAKE_MAGIC with VLANS\n",
-				dev->name);
+		netdev_err(dev, "cannot do WAKE_MAGIC with VLANS\n");
 		return -EBUSY;
 	}
 	spin_unlock_bh(&tp->state_lock);
@@ -2268,7 +2248,7 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
 	netif_device_detach(dev);
 
 	if(typhoon_stop_runtime(tp, WaitNoSleep) < 0) {
-		printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
+		netdev_err(dev, "unable to stop runtime\n");
 		goto need_resume;
 	}
 
@@ -2276,7 +2256,7 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
 	typhoon_init_rings(tp);
 
 	if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
-		printk(KERN_ERR "%s: unable to boot sleep image\n", dev->name);
+		netdev_err(dev, "unable to boot sleep image\n");
 		goto need_resume;
 	}
 
@@ -2284,21 +2264,19 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
 	xp_cmd.parm1 = cpu_to_le16(ntohs(*(__be16 *)&dev->dev_addr[0]));
 	xp_cmd.parm2 = cpu_to_le32(ntohl(*(__be32 *)&dev->dev_addr[2]));
 	if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
-		printk(KERN_ERR "%s: unable to set mac address in suspend\n",
-				dev->name);
+		netdev_err(dev, "unable to set mac address in suspend\n");
 		goto need_resume;
 	}
 
 	INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
 	xp_cmd.parm1 = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
 	if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
-		printk(KERN_ERR "%s: unable to set rx filter in suspend\n",
-				dev->name);
+		netdev_err(dev, "unable to set rx filter in suspend\n");
 		goto need_resume;
 	}
 
 	if(typhoon_sleep(tp, pci_choose_state(pdev, state), tp->wol_events) < 0) {
-		printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
+		netdev_err(dev, "unable to put card to sleep\n");
 		goto need_resume;
 	}
 
@@ -2352,7 +2330,7 @@ out_unmap:
 
 out:
 	if(!mode)
-		printk(KERN_INFO PFX "falling back to port IO\n");
+		pr_info("%s: falling back to port IO\n", pci_name(pdev));
 	return mode;
 }
 
@@ -2372,7 +2350,6 @@ static const struct net_device_ops typhoon_netdev_ops = {
 static int __devinit
 typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	static int did_version = 0;
 	struct net_device *dev;
 	struct typhoon *tp;
 	int card_id = (int) ent->driver_data;
@@ -2382,14 +2359,11 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct cmd_desc xp_cmd;
 	struct resp_desc xp_resp[3];
 	int err = 0;
-
-	if(!did_version++)
-		printk(KERN_INFO "%s", version);
+	const char *err_msg;
 
 	dev = alloc_etherdev(sizeof(*tp));
 	if(dev == NULL) {
-		printk(ERR_PFX "%s: unable to alloc new net device\n",
-		       pci_name(pdev));
+		err_msg = "unable to alloc new net device";
 		err = -ENOMEM;
 		goto error_out;
 	}
@@ -2397,57 +2371,48 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	err = pci_enable_device(pdev);
 	if(err < 0) {
-		printk(ERR_PFX "%s: unable to enable device\n",
-		       pci_name(pdev));
+		err_msg = "unable to enable device";
 		goto error_out_dev;
 	}
 
 	err = pci_set_mwi(pdev);
 	if(err < 0) {
-		printk(ERR_PFX "%s: unable to set MWI\n", pci_name(pdev));
+		err_msg = "unable to set MWI";
 		goto error_out_disable;
 	}
 
 	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if(err < 0) {
-		printk(ERR_PFX "%s: No usable DMA configuration\n",
-		       pci_name(pdev));
+		err_msg = "No usable DMA configuration";
 		goto error_out_mwi;
 	}
 
 	/* sanity checks on IO and MMIO BARs
 	 */
 	if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
-		printk(ERR_PFX
-		       "%s: region #1 not a PCI IO resource, aborting\n",
-		       pci_name(pdev));
+		err_msg = "region #1 not a PCI IO resource, aborting";
 		err = -ENODEV;
 		goto error_out_mwi;
 	}
 	if(pci_resource_len(pdev, 0) < 128) {
-		printk(ERR_PFX "%s: Invalid PCI IO region size, aborting\n",
-		       pci_name(pdev));
+		err_msg = "Invalid PCI IO region size, aborting";
 		err = -ENODEV;
 		goto error_out_mwi;
 	}
 	if(!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
-		printk(ERR_PFX
-		       "%s: region #1 not a PCI MMIO resource, aborting\n",
-		       pci_name(pdev));
+		err_msg = "region #1 not a PCI MMIO resource, aborting";
 		err = -ENODEV;
 		goto error_out_mwi;
 	}
 	if(pci_resource_len(pdev, 1) < 128) {
-		printk(ERR_PFX "%s: Invalid PCI MMIO region size, aborting\n",
-		       pci_name(pdev));
+		err_msg = "Invalid PCI MMIO region size, aborting";
 		err = -ENODEV;
 		goto error_out_mwi;
 	}
 
-	err = pci_request_regions(pdev, "typhoon");
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
 	if(err < 0) {
-		printk(ERR_PFX "%s: could not request regions\n",
-		       pci_name(pdev));
+		err_msg = "could not request regions";
 		goto error_out_mwi;
 	}
 
@@ -2458,8 +2423,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ioaddr = pci_iomap(pdev, use_mmio, 128);
 	if (!ioaddr) {
-		printk(ERR_PFX "%s: cannot remap registers, aborting\n",
-		       pci_name(pdev));
+		err_msg = "cannot remap registers, aborting";
 		err = -EIO;
 		goto error_out_regions;
 	}
@@ -2469,8 +2433,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared),
 				      &shared_dma);
 	if(!shared) {
-		printk(ERR_PFX "%s: could not allocate DMA memory\n",
-		       pci_name(pdev));
+		err_msg = "could not allocate DMA memory";
 		err = -ENOMEM;
 		goto error_out_remap;
 	}
@@ -2493,7 +2456,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * 5) Put the card to sleep.
 	 */
 	if (typhoon_reset(ioaddr, WaitSleep) < 0) {
-		printk(ERR_PFX "%s: could not reset 3XP\n", pci_name(pdev));
+		err_msg = "could not reset 3XP";
 		err = -EIO;
 		goto error_out_dma;
 	}
@@ -2505,26 +2468,18 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 
-	/* dev->name is not valid until we register, but we need to
-	 * use some common routines to initialize the card. So that those
-	 * routines print the right name, we keep our oun pointer to the name
-	 */
-	tp->name = pci_name(pdev);
-
 	typhoon_init_interface(tp);
 	typhoon_init_rings(tp);
 
 	if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
-		printk(ERR_PFX "%s: cannot boot 3XP sleep image\n",
-		       pci_name(pdev));
+		err_msg = "cannot boot 3XP sleep image";
 		err = -EIO;
 		goto error_out_reset;
 	}
 
 	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
 	if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
-		printk(ERR_PFX "%s: cannot read MAC address\n",
-		       pci_name(pdev));
+		err_msg = "cannot read MAC address";
 		err = -EIO;
 		goto error_out_reset;
 	}
@@ -2533,8 +2488,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	*(__be32 *)&dev->dev_addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2));
 
 	if(!is_valid_ether_addr(dev->dev_addr)) {
-		printk(ERR_PFX "%s: Could not obtain valid ethernet address, "
-		       "aborting\n", pci_name(pdev));
+		err_msg = "Could not obtain valid ethernet address, aborting";
 		goto error_out_reset;
 	}
 
@@ -2543,8 +2497,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
 	if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
-		printk(ERR_PFX "%s: Could not get Sleep Image version\n",
-			pci_name(pdev));
+		err_msg = "Could not get Sleep Image version";
 		goto error_out_reset;
 	}
 
@@ -2561,8 +2514,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
 
 	if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
-		printk(ERR_PFX "%s: cannot put adapter to sleep\n",
-		       pci_name(pdev));
+		err_msg = "cannot put adapter to sleep";
 		err = -EIO;
 		goto error_out_reset;
 	}
@@ -2581,19 +2533,18 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 	dev->features |= NETIF_F_TSO;
 
-	if(register_netdev(dev) < 0)
+	if(register_netdev(dev) < 0) {
+		err_msg = "unable to register netdev";
 		goto error_out_reset;
-
-	/* fixup our local name */
-	tp->name = dev->name;
+	}
 
 	pci_set_drvdata(pdev, dev);
 
-	printk(KERN_INFO "%s: %s at %s 0x%llx, %pM\n",
-	       dev->name, typhoon_card_info[card_id].name,
-	       use_mmio ? "MMIO" : "IO",
-	       (unsigned long long)pci_resource_start(pdev, use_mmio),
-	       dev->dev_addr);
+	netdev_info(dev, "%s at %s 0x%llx, %pM\n",
+		    typhoon_card_info[card_id].name,
+		    use_mmio ? "MMIO" : "IO",
+		    (unsigned long long)pci_resource_start(pdev, use_mmio),
+		    dev->dev_addr);
 
 	/* xp_resp still contains the response to the READ_VERSIONS command.
 	 * For debugging, let the user know what version he has.
@@ -2603,23 +2554,20 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		 * of version is Month/Day of build.
 		 */
 		u16 monthday = le32_to_cpu(xp_resp[0].parm2) & 0xffff;
-		printk(KERN_INFO "%s: Typhoon 1.0 Sleep Image built "
-			"%02u/%02u/2000\n", dev->name, monthday >> 8,
-			monthday & 0xff);
+		netdev_info(dev, "Typhoon 1.0 Sleep Image built %02u/%02u/2000\n",
+			    monthday >> 8, monthday & 0xff);
 	} else if(xp_resp[0].numDesc == 2) {
 		/* This is the Typhoon 1.1+ type Sleep Image
 		 */
 		u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
 		u8 *ver_string = (u8 *) &xp_resp[1];
 		ver_string[25] = 0;
-		printk(KERN_INFO "%s: Typhoon 1.1+ Sleep Image version "
-			"%02x.%03x.%03x %s\n", dev->name, sleep_ver >> 24,
-			(sleep_ver >> 12) & 0xfff, sleep_ver & 0xfff,
-			ver_string);
+		netdev_info(dev, "Typhoon 1.1+ Sleep Image version %02x.%03x.%03x %s\n",
+			    sleep_ver >> 24, (sleep_ver >> 12) & 0xfff,
+			    sleep_ver & 0xfff, ver_string);
 	} else {
-		printk(KERN_WARNING "%s: Unknown Sleep Image version "
-			"(%u:%04x)\n", dev->name, xp_resp[0].numDesc,
-			le32_to_cpu(xp_resp[0].parm2));
+		netdev_warn(dev, "Unknown Sleep Image version (%u:%04x)\n",
+			    xp_resp[0].numDesc, le32_to_cpu(xp_resp[0].parm2));
 	}
 
 	return 0;
@@ -2641,6 +2589,7 @@ error_out_disable:
 error_out_dev:
 	free_netdev(dev);
 error_out:
+	pr_err("%s: %s\n", pci_name(pdev), err_msg);
 	return err;
 }
 
@@ -2665,7 +2614,7 @@ typhoon_remove_one(struct pci_dev *pdev)
 }
 
 static struct pci_driver typhoon_driver = {
-	.name		= DRV_MODULE_NAME,
+	.name		= KBUILD_MODNAME,
 	.id_table	= typhoon_pci_tbl,
 	.probe		= typhoon_init_one,
 	.remove		= __devexit_p(typhoon_remove_one),
-- 
cgit v1.2.3


From 3b9a7728d878a3e7adc79fb89c3bb9ebc23760d7 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Fri, 19 Feb 2010 23:06:27 +0000
Subject: net/arm: convert to use netdev_for_each_mc_addr

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/arm/am79c961a.c     | 10 +++++-----
 drivers/net/arm/at91_ether.c    |  7 ++-----
 drivers/net/arm/ixp4xx_eth.c    | 13 ++++++++-----
 drivers/net/arm/ks8695net.c     | 20 +++++++++-----------
 drivers/net/arm/w90p910_ether.c |  8 ++++----
 5 files changed, 28 insertions(+), 30 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 1c3c1f94268e..f1f58c5e27bf 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -351,13 +351,13 @@ static struct net_device_stats *am79c961_getstats (struct net_device *dev)
 	return &priv->stats;
 }
 
-static void am79c961_mc_hash(struct dev_mc_list *dmi, unsigned short *hash)
+static void am79c961_mc_hash(char *addr, unsigned short *hash)
 {
-	if (dmi->dmi_addrlen == ETH_ALEN && dmi->dmi_addr[0] & 0x01) {
+	if (addr[0] & 0x01) {
 		int idx, bit;
 		u32 crc;
 
-		crc = ether_crc_le(ETH_ALEN, dmi->dmi_addr);
+		crc = ether_crc_le(ETH_ALEN, addr);
 
 		idx = crc >> 30;
 		bit = (crc >> 26) & 15;
@@ -387,8 +387,8 @@ static void am79c961_setmulticastlist (struct net_device *dev)
 
 		memset(multi_hash, 0x00, sizeof(multi_hash));
 
-		for (dmi = dev->mc_list; dmi; dmi = dmi->next)
-			am79c961_mc_hash(dmi, multi_hash);
+		netdev_for_each_mc_addr(dmi, dev)
+			am79c961_mc_hash(dmi->dmi_addr, multi_hash);
 	}
 
 	spin_lock_irqsave(&priv->chip_lock, flags);
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 17d85d98987d..8b23d5a175bf 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -558,14 +558,11 @@ static void at91ether_sethashtable(struct net_device *dev)
 {
 	struct dev_mc_list *curr;
 	unsigned long mc_filter[2];
-	unsigned int i, bitnr;
+	unsigned int bitnr;
 
 	mc_filter[0] = mc_filter[1] = 0;
 
-	curr = dev->mc_list;
-	for (i = 0; i < netdev_mc_count(dev); i++, curr = curr->next) {
-		if (!curr) break;	/* unexpected end of list */
-
+	netdev_for_each_mc_addr(curr, dev) {
 		bitnr = hash_get_index(curr->dmi_addr);
 		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
 	}
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 1a5f78b160f9..6e2ae1d06df1 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -735,22 +735,25 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 static void eth_set_mcast_list(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
-	struct dev_mc_list *mclist = dev->mc_list;
+	struct dev_mc_list *mclist;
 	u8 diffs[ETH_ALEN], *addr;
-	int cnt = netdev_mc_count(dev), i;
+	int i;
 
-	if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
+	if ((dev->flags & IFF_PROMISC) || netdev_mc_empty(dev)) {
 		__raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
 			     &port->regs->rx_control[0]);
 		return;
 	}
 
 	memset(diffs, 0, ETH_ALEN);
-	addr = mclist->dmi_addr; /* first MAC address */
 
-	while (--cnt && (mclist = mclist->next))
+	addr = NULL;
+	netdev_for_each_mc_addr(mclist, dev) {
+		if (!addr)
+			addr = mclist->dmi_addr; /* first MAC address */
 		for (i = 0; i < ETH_ALEN; i++)
 			diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
+	}
 
 	for (i = 0; i < ETH_ALEN; i++) {
 		__raw_writel(addr[i], &port->regs->mcast_addr[i]);
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 1dc181a9fbc3..238069699515 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -327,25 +327,24 @@ ks8695_refill_rxbuffers(struct ks8695_priv *ksp)
  */
 static void
 ks8695_init_partial_multicast(struct ks8695_priv *ksp,
-			      struct dev_mc_list *addr,
-			      int nr_addr)
+			      struct net_device *ndev)
 {
 	u32 low, high;
 	int i;
+	struct dev_mc_list *dmi;
 
-	for (i = 0; i < nr_addr; i++, addr = addr->next) {
-		/* Ran out of addresses? */
-		if (!addr)
-			break;
+	i = 0;
+	netdev_for_each_mc_addr(dmi, ndev) {
 		/* Ran out of space in chip? */
 		BUG_ON(i == KS8695_NR_ADDRESSES);
 
-		low = (addr->dmi_addr[2] << 24) | (addr->dmi_addr[3] << 16) |
-			(addr->dmi_addr[4] << 8) | (addr->dmi_addr[5]);
-		high = (addr->dmi_addr[0] << 8) | (addr->dmi_addr[1]);
+		low = (dmi->dmi_addr[2] << 24) | (dmi->dmi_addr[3] << 16) |
+		      (dmi->dmi_addr[4] << 8) | (dmi->dmi_addr[5]);
+		high = (dmi->dmi_addr[0] << 8) | (dmi->dmi_addr[1]);
 
 		ks8695_writereg(ksp, KS8695_AAL_(i), low);
 		ks8695_writereg(ksp, KS8695_AAH_(i), AAH_E | high);
+		i++;
 	}
 
 	/* Clear the remaining Additional Station Addresses */
@@ -1215,8 +1214,7 @@ ks8695_set_multicast(struct net_device *ndev)
 	} else {
 		/* enable specific multicasts */
 		ctrl &= ~DRXC_RM;
-		ks8695_init_partial_multicast(ksp, ndev->mc_list,
-					      netdev_mc_count(ndev));
+		ks8695_init_partial_multicast(ksp, ndev);
 	}
 
 	ks8695_writereg(ksp, KS8695_DRXC, ctrl);
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
index b7f3866d546f..febd813c916d 100644
--- a/drivers/net/arm/w90p910_ether.c
+++ b/drivers/net/arm/w90p910_ether.c
@@ -858,10 +858,10 @@ static void w90p910_ether_set_multicast_list(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC)
 		rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
-	else if ((dev->flags & IFF_ALLMULTI) || dev->mc_list)
-			rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
-		else
-				rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
+	else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
+		rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+	else
+		rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
 	__raw_writel(rx_mode, ether->reg + REG_CAMCMR);
 }
 
-- 
cgit v1.2.3


From 0ddf477b8a9b02412a6cabd51c486998811c7dd1 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Sat, 20 Feb 2010 00:13:58 +0000
Subject: net: convert multiple drivers to use netdev_for_each_mc_addr, part3

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/7990.c             |  6 ++----
 drivers/net/82596.c            |  9 ++++++---
 drivers/net/a2065.c            |  6 ++----
 drivers/net/amd8111e.c         | 11 ++++-------
 drivers/net/amd8111e.h         |  1 -
 drivers/net/appletalk/ltpc.c   |  1 -
 drivers/net/at1700.c           |  4 +---
 drivers/net/atl1c/atl1c_main.c |  2 +-
 drivers/net/atl1e/atl1e_main.c |  2 +-
 drivers/net/atlx/atl2.c        |  2 +-
 drivers/net/atlx/atlx.c        |  2 +-
 drivers/net/atp.c              |  4 +---
 drivers/net/au1000_eth.c       |  5 +----
 drivers/net/b44.c              |  8 +++++---
 drivers/net/bcm63xx_enet.c     | 13 +++++--------
 drivers/net/benet/be_cmds.c    | 10 +++++-----
 drivers/net/benet/be_cmds.h    |  3 +--
 drivers/net/benet/be_main.c    |  6 +++---
 drivers/net/bfin_mac.c         |  6 ++----
 drivers/net/bmac.c             |  7 +++----
 drivers/net/bnx2.c             |  4 +---
 drivers/net/bnx2x_main.c       | 12 ++++--------
 22 files changed, 50 insertions(+), 74 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 079d0be37821..4e9a5a20b6a6 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -595,9 +595,8 @@ static void lance_load_multicast (struct net_device *dev)
         struct lance_private *lp = netdev_priv(dev);
         volatile struct lance_init_block *ib = lp->init_block;
         volatile u16 *mcast_table = (u16 *)&ib->filter;
-        struct dev_mc_list *dmi=dev->mc_list;
+	struct dev_mc_list *dmi;
         char *addrs;
-        int i;
         u32 crc;
 
         /* set all multicast bits */
@@ -611,9 +610,8 @@ static void lance_load_multicast (struct net_device *dev)
         ib->filter [1] = 0;
 
         /* Add addresses */
-        for (i = 0; i < netdev_mc_count(dev); i++){
+	netdev_for_each_mc_addr(dmi, dev) {
                 addrs = dmi->dmi_addr;
-                dmi   = dmi->next;
 
                 /* multicast address? */
                 if (!(*addrs & 1))
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 638ce3b29854..f94d17d78bb0 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -1550,13 +1550,16 @@ static void set_multicast_list(struct net_device *dev)
 			return;
 		cmd = &lp->mc_cmd;
 		cmd->cmd.command = CmdMulticastList;
-		cmd->mc_cnt = netdev_mc_count(dev) * 6;
+		cmd->mc_cnt = cnt * ETH_ALEN;
 		cp = cmd->mc_addrs;
-		for (dmi = dev->mc_list; cnt && dmi != NULL; dmi = dmi->next, cnt--, cp += 6) {
-			memcpy(cp, dmi->dmi_addr, 6);
+		netdev_for_each_mc_addr(dmi, dev) {
+			if (!cnt--)
+				break;
+			memcpy(cp, dmi->dmi_addr, ETH_ALEN);
 			if (i596_debug > 1)
 				DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",
 						dev->name, cp));
+			cp += ETH_ALEN;
 		}
 		i596_add_cmd(dev, &cmd->cmd);
 	}
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 6a65f660c192..bd4d829eca12 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -603,9 +603,8 @@ static void lance_load_multicast (struct net_device *dev)
 	struct lance_private *lp = netdev_priv(dev);
 	volatile struct lance_init_block *ib = lp->init_block;
 	volatile u16 *mcast_table = (u16 *)&ib->filter;
-	struct dev_mc_list *dmi=dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
-	int i;
 	u32 crc;
 
 	/* set all multicast bits */
@@ -619,9 +618,8 @@ static void lance_load_multicast (struct net_device *dev)
 	ib->filter [1] = 0;
 
 	/* Add addresses */
-	for (i = 0; i < netdev_mc_count(dev); i++){
+	netdev_for_each_mc_addr(dmi, dev) {
 		addrs = dmi->dmi_addr;
-		dmi   = dmi->next;
 
 		/* multicast address? */
 		if (!(*addrs & 1))
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index bdffdfb4c88b..b8a59d255b49 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1377,10 +1377,11 @@ list to the device.
 */
 static void amd8111e_set_multicast_list(struct net_device *dev)
 {
-	struct dev_mc_list* mc_ptr;
+	struct dev_mc_list *mc_ptr;
 	struct amd8111e_priv *lp = netdev_priv(dev);
 	u32 mc_filter[2] ;
-	int i,bit_num;
+	int bit_num;
+
 	if(dev->flags & IFF_PROMISC){
 		writel( VAL2 | PROM, lp->mmio + CMD2);
 		return;
@@ -1391,7 +1392,6 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 	    netdev_mc_count(dev) > MAX_FILTER_SIZE) {
 		/* get all multicast packet */
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-		lp->mc_list = dev->mc_list;
 		lp->options |= OPTION_MULTICAST_ENABLE;
 		amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
 		return;
@@ -1399,7 +1399,6 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 	if (netdev_mc_empty(dev)) {
 		/* get only own packets */
 		mc_filter[1] = mc_filter[0] = 0;
-		lp->mc_list = NULL;
 		lp->options &= ~OPTION_MULTICAST_ENABLE;
 		amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
 		/* disable promiscous mode */
@@ -1408,10 +1407,8 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 	}
 	/* load all the multicast addresses in the logic filter */
 	lp->options |= OPTION_MULTICAST_ENABLE;
-	lp->mc_list = dev->mc_list;
 	mc_filter[1] = mc_filter[0] = 0;
-	for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < netdev_mc_count(dev);
-		     i++, mc_ptr = mc_ptr->next) {
+	netdev_for_each_mc_addr(mc_ptr, dev) {
 		bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
 		mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
 	}
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
index 28c60a71ed50..ac36eb6981e3 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/amd8111e.h
@@ -789,7 +789,6 @@ struct amd8111e_priv{
 	char opened;
 	struct net_device_stats stats;
 	unsigned int drv_rx_errors;
-	struct dev_mc_list* mc_list;
 	struct amd8111e_coalesce_conf coal_conf;
 
 	struct ipg_info  ipg_data;
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index dbfbd3b7ff86..8ea4ec705bef 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1125,7 +1125,6 @@ struct net_device * __init ltpc_probe(void)
 		printk(KERN_INFO "Apple/Farallon LocalTalk-PC card at %03x, DMA%d.  Using polled mode.\n",io,dma);
 
 	dev->netdev_ops = &ltpc_netdev;
-	dev->mc_list = NULL;
 	dev->base_addr = io;
 	dev->irq = irq;
 	dev->dma = dma;
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index fe60cd02c86c..309843ab8869 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -849,11 +849,9 @@ set_rx_mode(struct net_device *dev)
 		outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
 	} else {
 		struct dev_mc_list *mclist;
-		int i;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			unsigned int bit =
 				ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
 			mc_filter[bit >> 3] |= (1 << bit);
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 3d4c0a5a77eb..50dc531a02d8 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -377,7 +377,7 @@ static void atl1c_set_multi(struct net_device *netdev)
 	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
 
 	/* comoute mc addresses' hash value ,and put it into hash table */
-	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+	netdev_for_each_mc_addr(mc_ptr, netdev) {
 		hash_value = atl1c_hash_mc_addr(hw, mc_ptr->dmi_addr);
 		atl1c_hash_set(hw, hash_value);
 	}
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 7d8de10ba628..73302ae468aa 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -307,7 +307,7 @@ static void atl1e_set_multi(struct net_device *netdev)
 	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
 
 	/* comoute mc addresses' hash value ,and put it into hash table */
-	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+	netdev_for_each_mc_addr(mc_ptr, netdev) {
 		hash_value = atl1e_hash_mc_addr(hw, mc_ptr->dmi_addr);
 		atl1e_hash_set(hw, hash_value);
 	}
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index 40cf9e5cb9e2..7061d7108f08 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -157,7 +157,7 @@ static void atl2_set_multi(struct net_device *netdev)
 	ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
 
 	/* comoute mc addresses' hash value ,and put it into hash table */
-	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+	netdev_for_each_mc_addr(mc_ptr, netdev) {
 		hash_value = atl2_hash_mc_addr(hw, mc_ptr->dmi_addr);
 		atl2_hash_set(hw, hash_value);
 	}
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
index 3dc014215679..72f3306352e2 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/atlx/atlx.c
@@ -144,7 +144,7 @@ static void atlx_set_multi(struct net_device *netdev)
 	iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
 
 	/* compute mc addresses' hash value ,and put it into hash table */
-	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+	netdev_for_each_mc_addr(mc_ptr, netdev) {
 		hash_value = atlx_hash_mc_addr(hw, mc_ptr->dmi_addr);
 		atlx_hash_set(hw, hash_value);
 	}
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index a841feb5df20..6ad16205dc17 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -886,9 +886,7 @@ static void set_rx_mode_8012(struct net_device *dev)
 		struct dev_mc_list *mclist;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next)
-		{
+		netdev_for_each_mc_addr(mclist, dev) {
 			int filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
 			mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
 		}
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 9337d023919c..a66b06aa1f0b 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1018,16 +1018,13 @@ static void au1000_multicast_list(struct net_device *dev)
 		aup->mac->control &= ~MAC_PROMISCUOUS;
 		printk(KERN_INFO "%s: Pass all multicast\n", dev->name);
 	} else {
-		int i;
 		struct dev_mc_list *mclist;
 		u32 mc_filter[2];	/* Multicast hash filter */
 
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev)
 			set_bit(ether_crc(ETH_ALEN, mclist->dmi_addr)>>26,
 					(long *)mc_filter);
-		}
 		aup->mac->multi_hash_high = mc_filter[1];
 		aup->mac->multi_hash_low = mc_filter[0];
 		aup->mac->control &= ~MAC_PROMISCUOUS;
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index bcb6a029a0a8..332c60356285 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1684,9 +1684,11 @@ static int __b44_load_mcast(struct b44 *bp, struct net_device *dev)
 	int i, num_ents;
 
 	num_ents = min_t(int, netdev_mc_count(dev), B44_MCAST_TABLE_SIZE);
-	mclist = dev->mc_list;
-	for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) {
-		__b44_cam_write(bp, mclist->dmi_addr, i + 1);
+	i = 0;
+	netdev_for_each_mc_addr(mclist, dev) {
+		if (i == num_ents)
+			break;
+		__b44_cam_write(bp, mclist->dmi_addr, i++ + 1);
 	}
 	return i+1;
 }
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index 0927ffa0d753..8cdcab7655c0 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -631,16 +631,13 @@ static void bcm_enet_set_multicast_list(struct net_device *dev)
 		return;
 	}
 
-	for (i = 0, mc_list = dev->mc_list;
-	     (mc_list != NULL) && (i < netdev_mc_count(dev)) && (i < 3);
-	     i++, mc_list = mc_list->next) {
+	i = 0;
+	netdev_for_each_mc_addr(mc_list, dev) {
 		u8 *dmi_addr;
 		u32 tmp;
 
-		/* filter non ethernet address */
-		if (mc_list->dmi_addrlen != 6)
-			continue;
-
+		if (i == 3)
+			break;
 		/* update perfect match registers */
 		dmi_addr = mc_list->dmi_addr;
 		tmp = (dmi_addr[2] << 24) | (dmi_addr[3] << 16) |
@@ -649,7 +646,7 @@ static void bcm_enet_set_multicast_list(struct net_device *dev)
 
 		tmp = (dmi_addr[0] << 8 | dmi_addr[1]);
 		tmp |= ENET_PMH_DATAVALID_MASK;
-		enet_writel(priv, tmp, ENET_PMH_REG(i + 1));
+		enet_writel(priv, tmp, ENET_PMH_REG(i++ + 1));
 	}
 
 	for (; i < 3; i++) {
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index ee16b374e02c..c8a2bacb1d13 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1134,8 +1134,7 @@ err:
  * (mc == NULL) => multicast promiscous
  */
 int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
-		struct dev_mc_list *mc_list, u32 mc_count,
-		struct be_dma_mem *mem)
+		struct net_device *netdev, struct be_dma_mem *mem)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_mcast_mac_config *req = mem->va;
@@ -1162,13 +1161,14 @@ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 		OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
 
 	req->interface_id = if_id;
-	if (mc_list) {
+	if (netdev) {
 		int i;
 		struct dev_mc_list *mc;
 
-		req->num_mac = cpu_to_le16(mc_count);
+		req->num_mac = cpu_to_le16(netdev_mc_count(netdev));
 
-		for (mc = mc_list, i = 0; mc; mc = mc->next, i++)
+		i = 0;
+		netdev_for_each_mc_addr(mc, netdev)
 			memcpy(req->mac[i].byte, mc->dmi_addr, ETH_ALEN);
 	} else {
 		req->promiscuous = 1;
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 3464924d6c28..728b0d736929 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -912,8 +912,7 @@ extern int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id,
 extern int be_cmd_promiscuous_config(struct be_adapter *adapter,
 			u8 port_num, bool en);
 extern int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
-			struct dev_mc_list *mc_list, u32 mc_count,
-			struct be_dma_mem *mem);
+			struct net_device *netdev, struct be_dma_mem *mem);
 extern int be_cmd_set_flow_control(struct be_adapter *adapter,
 			u32 tx_fc, u32 rx_fc);
 extern int be_cmd_get_flow_control(struct be_adapter *adapter,
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index de0830e14aa5..27ccdd80257b 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -577,13 +577,13 @@ static void be_set_multicast_list(struct net_device *netdev)
 	/* Enable multicast promisc if num configured exceeds what we support */
 	if (netdev->flags & IFF_ALLMULTI ||
 	    netdev_mc_count(netdev) > BE_MAX_MC) {
-		be_cmd_multicast_set(adapter, adapter->if_handle, NULL, 0,
+		be_cmd_multicast_set(adapter, adapter->if_handle, NULL,
 				&adapter->mc_cmd_mem);
 		goto done;
 	}
 
-	be_cmd_multicast_set(adapter, adapter->if_handle, netdev->mc_list,
-		netdev_mc_count(netdev), &adapter->mc_cmd_mem);
+	be_cmd_multicast_set(adapter, adapter->if_handle, netdev,
+			&adapter->mc_cmd_mem);
 done:
 	return;
 }
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ef7f77113e26..587f93cf03f6 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -812,16 +812,14 @@ static void bfin_mac_timeout(struct net_device *dev)
 static void bfin_mac_multicast_hash(struct net_device *dev)
 {
 	u32 emac_hashhi, emac_hashlo;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
-	int i;
 	u32 crc;
 
 	emac_hashhi = emac_hashlo = 0;
 
-	for (i = 0; i < netdev_mc_count(dev); i++) {
+	netdev_for_each_mc_addr(dmi, dev) {
 		addrs = dmi->dmi_addr;
-		dmi = dmi->next;
 
 		/* skip non-multicast addresses */
 		if (!(*addrs & 1))
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 189fa69c2094..119468e76323 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1000,7 +1000,7 @@ static void bmac_set_multicast(struct net_device *dev)
 			rx_cfg = bmac_rx_on(dev, 0, 0);
 			XXDEBUG(("bmac: multi disabled, rx_cfg=%#08x\n", rx_cfg));
 		} else {
-			for (dmi=dev->mc_list; dmi!=NULL; dmi=dmi->next)
+			netdev_for_each_mc_addr(dmi, dev)
 				bmac_addhash(bp, dmi->dmi_addr);
 			bmac_update_hash_table_mask(dev, bp);
 			rx_cfg = bmac_rx_on(dev, 1, 0);
@@ -1015,7 +1015,7 @@ static void bmac_set_multicast(struct net_device *dev)
 
 static void bmac_set_multicast(struct net_device *dev)
 {
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	char *addrs;
 	int i;
 	unsigned short rx_cfg;
@@ -1039,9 +1039,8 @@ static void bmac_set_multicast(struct net_device *dev)
 
 		for(i = 0; i < 4; i++) hash_table[i] = 0;
 
-		for(i = 0; i < netdev_mc_count(dev); i++) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 
 			if(!(*addrs & 1))
 				continue;
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a6cc9d02e589..d3f739a295df 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3552,9 +3552,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 
 		memset(mc_filter, 0, 4 * NUM_MC_HASH_REGISTERS);
 
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
-
+		netdev_for_each_mc_addr(mclist, dev) {
 			crc = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
 			bit = crc & 0xff;
 			regidx = (bit & 0xe0) >> 5;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 7f9db47e8cc3..5adf2a05246f 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -11483,10 +11483,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 			struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
 
-			for (i = 0, mclist = dev->mc_list;
-			     mclist && (i < netdev_mc_count(dev));
-			     i++, mclist = mclist->next) {
-
+			i = 0;
+			netdev_for_each_mc_addr(mclist, dev) {
 				config->config_table[i].
 					cam_entry.msb_mac_addr =
 					swab16(*(u16 *)&mclist->dmi_addr[0]);
@@ -11514,6 +11512,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 						cam_entry.middle_mac_addr,
 				   config->config_table[i].
 						cam_entry.lsb_mac_addr);
+				i++;
 			}
 			old = config->hdr.length;
 			if (old > i) {
@@ -11555,10 +11554,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
 
 			memset(mc_filter, 0, 4 * MC_HASH_SIZE);
 
-			for (i = 0, mclist = dev->mc_list;
-			     mclist && (i < netdev_mc_count(dev));
-			     i++, mclist = mclist->next) {
-
+			netdev_for_each_mc_addr(mclist, dev) {
 				DP(NETIF_MSG_IFUP, "Adding mcast MAC: %pM\n",
 				   mclist->dmi_addr);
 
-- 
cgit v1.2.3


From 7a81e9f3ca712db82344ea3ab2a5879241f59c48 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Mon, 22 Feb 2010 09:10:44 +0000
Subject: e1000: convert to use netdev_for_each_mc_addr

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 37 +++++++++++++++++--------------------
 1 file changed, 17 insertions(+), 20 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 3b14dd718ab4..c99f95c1b418 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2161,29 +2161,26 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 
 	WARN_ON(i == rar_entries);
 
-	mc_ptr = netdev->mc_list;
-
-	for (; i < rar_entries; i++) {
-		if (mc_ptr) {
-			e1000_rar_set(hw, mc_ptr->da_addr, i);
-			mc_ptr = mc_ptr->next;
-		} else {
-			E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
-			E1000_WRITE_FLUSH();
-			E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
-			E1000_WRITE_FLUSH();
+	netdev_for_each_mc_addr(mc_ptr, netdev) {
+		if (i == rar_entries) {
+			/* load any remaining addresses into the hash table */
+			u32 hash_reg, hash_bit, mta;
+			hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
+			hash_reg = (hash_value >> 5) & 0x7F;
+			hash_bit = hash_value & 0x1F;
+			mta = (1 << hash_bit);
+			mcarray[hash_reg] |= mta;
+		}
+		else {
+			e1000_rar_set(hw, mc_ptr->da_addr, i++);
 		}
 	}
 
-	/* load any remaining addresses into the hash table */
-
-	for (; mc_ptr; mc_ptr = mc_ptr->next) {
-		u32 hash_reg, hash_bit, mta;
-		hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
-		hash_reg = (hash_value >> 5) & 0x7F;
-		hash_bit = hash_value & 0x1F;
-		mta = (1 << hash_bit);
-		mcarray[hash_reg] |= mta;
+	for (; i < rar_entries; i++) {
+		E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+		E1000_WRITE_FLUSH();
+		E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+		E1000_WRITE_FLUSH();
 	}
 
 	/* write the hash table completely, write from bottom to avoid
-- 
cgit v1.2.3


From 48e2f183cb1709600012265a2e723f45a350d5fe Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Mon, 22 Feb 2010 09:22:26 +0000
Subject: net: convert multiple drivers to use netdev_for_each_mc_addr, part4

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/davinci_emac.c     |  5 ++---
 drivers/net/e100.c             | 10 +++++++---
 drivers/net/eepro.c            |  8 +++-----
 drivers/net/eexpress.c         | 16 ++++++----------
 drivers/net/ehea/ehea_main.c   |  5 ++---
 drivers/net/enic/enic_main.c   | 10 ++++++----
 drivers/net/epic100.c          |  3 +--
 drivers/net/ethoc.c            |  6 +++---
 drivers/net/ewrk3.c            |  5 ++---
 drivers/net/fealnx.c           |  4 +---
 drivers/net/fec.c              |  6 ++----
 drivers/net/fec_mpc52xx.c      |  5 +----
 drivers/net/forcedeth.c        |  6 ++----
 drivers/net/fs_enet/mac-fcc.c  |  2 +-
 drivers/net/fs_enet/mac-fec.c  |  2 +-
 drivers/net/fs_enet/mac-scc.c  |  2 +-
 drivers/net/gianfar.c          |  2 +-
 drivers/net/hamachi.c          |  7 ++++---
 drivers/net/hp100.c            |  6 +++---
 drivers/net/ibm_newemac/core.c |  2 +-
 drivers/net/ibmlana.c          |  2 +-
 drivers/net/ibmveth.c          |  5 ++---
 drivers/net/igb/igb_main.c     | 12 ++++--------
 drivers/net/igbvf/netdev.c     | 12 +++---------
 drivers/net/ioc3-eth.c         |  6 ++----
 drivers/net/ipg.c              |  3 +--
 drivers/net/isa-skeleton.c     |  2 +-
 drivers/net/iseries_veth.c     |  6 ++----
 drivers/net/ixgb/ixgb_main.c   |  7 +++----
 29 files changed, 69 insertions(+), 98 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index d1e03b5984c0..3f5db83c7cbb 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -965,10 +965,9 @@ static void emac_dev_mcast_set(struct net_device *ndev)
 			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
 			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
 			/* program multicast address list into EMAC hardware */
-			for (mc_ptr = ndev->mc_list; mc_ptr;
-			     mc_ptr = mc_ptr->next) {
+			netdev_for_each_mc_addr(mc_ptr, ndev) {
 				emac_add_mcast(priv, EMAC_MULTICAST_ADD,
-					       (u8 *)mc_ptr->dmi_addr);
+					       (u8 *) mc_ptr->dmi_addr);
 			}
 		} else {
 			mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index e8c0e823a06f..a26ccab057d5 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1537,14 +1537,18 @@ static int e100_hw_init(struct nic *nic)
 static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct net_device *netdev = nic->netdev;
-	struct dev_mc_list *list = netdev->mc_list;
+	struct dev_mc_list *list;
 	u16 i, count = min(netdev_mc_count(netdev), E100_MAX_MULTICAST_ADDRS);
 
 	cb->command = cpu_to_le16(cb_multi);
 	cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
-	for (i = 0; list && i < count; i++, list = list->next)
-		memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
+	i = 0;
+	netdev_for_each_mc_addr(list, netdev) {
+		if (i == count)
+			break;
+		memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &list->dmi_addr,
 			ETH_ALEN);
+	}
 }
 
 static void e100_set_multicast_list(struct net_device *netdev)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 5f73ab22db16..1b05bdf62c3c 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1287,7 +1287,7 @@ set_multicast_list(struct net_device *dev)
 	struct eepro_local *lp = netdev_priv(dev);
 	short ioaddr = dev->base_addr;
 	unsigned short mode;
-	struct dev_mc_list *dmi=dev->mc_list;
+	struct dev_mc_list *dmi;
 	int mc_count = netdev_mc_count(dev);
 
 	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63)
@@ -1332,10 +1332,8 @@ set_multicast_list(struct net_device *dev)
 		outw(0, ioaddr + IO_PORT);
 		outw(6 * (mc_count + 1), ioaddr + IO_PORT);
 
-		for (i = 0; i < mc_count; i++)
-		{
-			eaddrs=(unsigned short *)dmi->dmi_addr;
-			dmi=dmi->next;
+		netdev_for_each_mc_addr(dmi, dev) {
+			eaddrs = (unsigned short *) dmi->dmi_addr;
 			outw(*eaddrs++, ioaddr + IO_PORT);
 			outw(*eaddrs++, ioaddr + IO_PORT);
 			outw(*eaddrs++, ioaddr + IO_PORT);
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index d804ff18eda8..7013dc8a6cbc 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1588,23 +1588,19 @@ static void eexp_setup_filter(struct net_device *dev)
 
 	outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
 	outw(6*count, ioaddr+SHADOW(CONF_NR_MULTICAST));
-	for (i = 0, dmi = dev->mc_list; i < count; i++, dmi = dmi->next) {
-		unsigned short *data;
-		if (!dmi) {
-			printk(KERN_INFO "%s: too few multicast addresses\n", dev->name);
+	i = 0;
+	netdev_for_each_mc_addr(dmi, dev) {
+		unsigned short *data = (unsigned short *) dmi->dmi_addr;
+
+		if (i == count)
 			break;
-		}
-		if (dmi->dmi_addrlen != ETH_ALEN) {
-			printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
-			continue;
-		}
-		data = (unsigned short *)dmi->dmi_addr;
 		outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
 		outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
 		outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
 		outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
 		outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
 		outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
+		i++;
 	}
 }
 
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 99e4f8360d2f..b004eaba3d7b 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1967,7 +1967,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
 {
 	struct ehea_port *port = netdev_priv(dev);
 	struct dev_mc_list *k_mcl_entry;
-	int ret, i;
+	int ret;
 
 	if (dev->flags & IFF_PROMISC) {
 		ehea_promiscuous(dev, 1);
@@ -1997,8 +1997,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
 			goto out;
 		}
 
-		for (i = 0, k_mcl_entry = dev->mc_list; i < netdev_mc_count(dev); i++,
-			     k_mcl_entry = k_mcl_entry->next)
+		netdev_for_each_mc_addr(k_mcl_entry, dev)
 			ehea_add_multicast_entry(port, k_mcl_entry->dmi_addr);
 
 	}
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 94749ebaaea8..cf098bb636b8 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -822,7 +822,7 @@ static int enic_set_mac_addr(struct net_device *netdev, char *addr)
 static void enic_set_multicast_list(struct net_device *netdev)
 {
 	struct enic *enic = netdev_priv(netdev);
-	struct dev_mc_list *list = netdev->mc_list;
+	struct dev_mc_list *list;
 	int directed = 1;
 	int multicast = (netdev->flags & IFF_MULTICAST) ? 1 : 0;
 	int broadcast = (netdev->flags & IFF_BROADCAST) ? 1 : 0;
@@ -851,9 +851,11 @@ static void enic_set_multicast_list(struct net_device *netdev)
 	 * look for changes to add/del.
 	 */
 
-	for (i = 0; list && i < mc_count; i++) {
-		memcpy(mc_addr[i], list->dmi_addr, ETH_ALEN);
-		list = list->next;
+	i = 0;
+	netdev_for_each_mc_addr(list, netdev) {
+		if (i == mc_count)
+			break;
+		memcpy(mc_addr[i++], list->dmi_addr, ETH_ALEN);
 	}
 
 	for (i = 0; i < enic->mc_count; i++) {
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 31a3adb65566..39c271b6be44 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -1403,8 +1403,7 @@ static void set_rx_mode(struct net_device *dev)
 		struct dev_mc_list *mclist;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			unsigned int bit_nr =
 				ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
 			mc_filter[bit_nr >> 3] |= (1 << bit_nr);
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index f9d5ca078743..209742304e20 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -755,7 +755,7 @@ static void ethoc_set_multicast_list(struct net_device *dev)
 {
 	struct ethoc *priv = netdev_priv(dev);
 	u32 mode = ethoc_read(priv, MODER);
-	struct dev_mc_list *mc = NULL;
+	struct dev_mc_list *mc;
 	u32 hash[2] = { 0, 0 };
 
 	/* set loopback mode if requested */
@@ -783,8 +783,8 @@ static void ethoc_set_multicast_list(struct net_device *dev)
 		hash[0] = 0xffffffff;
 		hash[1] = 0xffffffff;
 	} else {
-		for (mc = dev->mc_list; mc; mc = mc->next) {
-			u32 crc = ether_crc(mc->dmi_addrlen, mc->dmi_addr);
+		netdev_for_each_mc_addr(mc, dev) {
+			u32 crc = ether_crc(ETH_ALEN, mc->dmi_addr);
 			int bit = (crc >> 26) & 0x3f;
 			hash[bit >> 5] |= 1 << (bit & 0x1f);
 		}
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index 96817a872f47..91e59f3a9d6d 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1169,7 +1169,7 @@ static void set_multicast_list(struct net_device *dev)
 static void SetMulticastFilter(struct net_device *dev)
 {
 	struct ewrk3_private *lp = netdev_priv(dev);
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	u_long iobase = dev->base_addr;
 	int i;
 	char *addrs, bit, byte;
@@ -1213,9 +1213,8 @@ static void SetMulticastFilter(struct net_device *dev)
 		}
 
 		/* Update table */
-		for (i = 0; i < netdev_mc_count(dev); i++) {	/* for each address in the list */
+		netdev_for_each_mc_addr(dmi, dev) {
 			addrs = dmi->dmi_addr;
-			dmi = dmi->next;
 			if ((*addrs & 0x01) == 1) {	/* multicast address? */
 				crc = ether_crc_le(ETH_ALEN, addrs);
 				hashcode = crc & ((1 << 9) - 1);	/* hashcode is 9 LSb of CRC */
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index f95b5ff0587d..9d5ad08a119f 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1793,11 +1793,9 @@ static void __set_rx_mode(struct net_device *dev)
 		rx_mode = CR_W_AB | CR_W_AM;
 	} else {
 		struct dev_mc_list *mclist;
-		int i;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			unsigned int bit;
 			bit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
 			mc_filter[bit >> 5] |= (1 << bit);
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index d9d14c83f51c..9f98c1c4a344 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1575,7 +1575,7 @@ static void set_multicast_list(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct dev_mc_list *dmi;
-	unsigned int i, j, bit, data, crc, tmp;
+	unsigned int i, bit, data, crc, tmp;
 	unsigned char hash;
 
 	if (dev->flags & IFF_PROMISC) {
@@ -1604,9 +1604,7 @@ static void set_multicast_list(struct net_device *dev)
 	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
 	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
 
-	dmi = dev->mc_list;
-
-	for (j = 0; j < netdev_mc_count(dev); j++, dmi = dmi->next) {
+	netdev_for_each_mc_addr(dmi, dev) {
 		/* Only support group multicast for now */
 		if (!(dmi->dmi_addr[0] & 1))
 			continue;
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 10903b75802f..0dbd7219bbde 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -575,19 +575,16 @@ static void mpc52xx_fec_set_multicast_list(struct net_device *dev)
 			out_be32(&fec->gaddr2, 0xffffffff);
 		} else {
 			u32 crc;
-			int i;
 			struct dev_mc_list *dmi;
 			u32 gaddr1 = 0x00000000;
 			u32 gaddr2 = 0x00000000;
 
-			dmi = dev->mc_list;
-			for (i=0; i<netdev_mc_count(dev); i++) {
+			netdev_for_each_mc_addr(dmi, dev) {
 				crc = ether_crc_le(6, dmi->dmi_addr) >> 26;
 				if (crc >= 32)
 					gaddr1 |= 1 << (crc-32);
 				else
 					gaddr2 |= 1 << crc;
-				dmi = dmi->next;
 			}
 			out_be32(&fec->gaddr1, gaddr1);
 			out_be32(&fec->gaddr2, gaddr2);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 3eb713b014f9..ca05e5662029 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3095,7 +3095,7 @@ static void nv_set_multicast(struct net_device *dev)
 	} else {
 		pff |= NVREG_PFF_MYADDR;
 
-		if (dev->flags & IFF_ALLMULTI || dev->mc_list) {
+		if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
 			u32 alwaysOff[2];
 			u32 alwaysOn[2];
 
@@ -3105,8 +3105,7 @@ static void nv_set_multicast(struct net_device *dev)
 			} else {
 				struct dev_mc_list *walk;
 
-				walk = dev->mc_list;
-				while (walk != NULL) {
+				netdev_for_each_mc_addr(walk, dev) {
 					u32 a, b;
 					a = le32_to_cpu(*(__le32 *) walk->dmi_addr);
 					b = le16_to_cpu(*(__le16 *) (&walk->dmi_addr[4]));
@@ -3114,7 +3113,6 @@ static void nv_set_multicast(struct net_device *dev)
 					alwaysOff[0] &= ~a;
 					alwaysOn[1] &= b;
 					alwaysOff[1] &= ~b;
-					walk = walk->next;
 				}
 			}
 			addr[0] = alwaysOn[0];
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 482f27d5f7d4..a761d31e3d6d 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -235,7 +235,7 @@ static void set_multicast_list(struct net_device *dev)
 
 	if ((dev->flags & IFF_PROMISC) == 0) {
 		set_multicast_start(dev);
-		for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+		netdev_for_each_mc_addr(pmc, dev)
 			set_multicast_one(dev, pmc->dmi_addr);
 		set_multicast_finish(dev);
 	} else
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index ddf13ef8ac87..ca806d1ab3f6 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -236,7 +236,7 @@ static void set_multicast_list(struct net_device *dev)
 
 	if ((dev->flags & IFF_PROMISC) == 0) {
 		set_multicast_start(dev);
-		for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+		netdev_for_each_mc_addr(pmc, dev)
 			set_multicast_one(dev, pmc->dmi_addr);
 		set_multicast_finish(dev);
 	} else
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 141dbc91e5e7..5bfc99b9475e 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -228,7 +228,7 @@ static void set_multicast_list(struct net_device *dev)
 
 	if ((dev->flags & IFF_PROMISC) == 0) {
 		set_multicast_start(dev);
-		for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+		netdev_for_each_mc_addr(pmc, dev)
 			set_multicast_one(dev, pmc->dmi_addr);
 		set_multicast_finish(dev);
 	} else
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index c9be090485dd..6aa526ee9096 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2867,7 +2867,7 @@ static void gfar_set_multi(struct net_device *dev)
 			return;
 
 		/* Parse the list, and set the appropriate bits */
-		for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+		netdev_for_each_mc_addr(mc_ptr, dev) {
 			if (idx < em_num) {
 				gfar_set_mac_for_addr(dev, idx,
 						mc_ptr->dmi_addr);
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index c70b147b4feb..373546dd0831 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1859,12 +1859,13 @@ static void set_rx_mode(struct net_device *dev)
 		writew(0x000B, ioaddr + AddrMode);
 	} else if (!netdev_mc_empty(dev)) { /* Must use the CAM filter. */
 		struct dev_mc_list *mclist;
-		int i;
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next) {
+		int i = 0;
+
+		netdev_for_each_mc_addr(mclist, dev) {
 			writel(*(u32*)(mclist->dmi_addr), ioaddr + 0x100 + i*8);
 			writel(0x20000 | (*(u16*)&mclist->dmi_addr[4]),
 				   ioaddr + 0x104 + i*8);
+			i++;
 		}
 		/* Clear remaining entries. */
 		for (; i < 64; i++)
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index debac1bc6799..b766a69bf0ca 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2098,7 +2098,7 @@ static void hp100_set_multicast_list(struct net_device *dev)
 			/* set hash filter to receive all multicast packets */
 			memset(&lp->hash_bytes, 0xff, 8);
 		} else {
-			int i, j, idx;
+			int i, idx;
 			u_char *addrs;
 			struct dev_mc_list *dmi;
 
@@ -2107,14 +2107,14 @@ static void hp100_set_multicast_list(struct net_device *dev)
 			printk("hp100: %s: computing hash filter - mc_count = %i\n",
 			       dev->name, netdev_mc_count(dev));
 #endif
-			for (i = 0, dmi = dev->mc_list; i < netdev_mc_count(dev); i++, dmi = dmi->next) {
+			netdev_for_each_mc_addr(dmi, dev) {
 				addrs = dmi->dmi_addr;
 				if ((*addrs & 0x01) == 0x01) {	/* multicast address? */
 #ifdef HP100_DEBUG
 					printk("hp100: %s: multicast = %pM, ",
 						     dev->name, addrs);
 #endif
-					for (j = idx = 0; j < 6; j++) {
+					for (i = idx = 0; i < 6; i++) {
 						idx ^= *addrs++ & 0x3f;
 						printk(":%02x:", idx);
 					}
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index b75d27e82a3d..fb0ac6d7c040 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -395,7 +395,7 @@ static void emac_hash_mc(struct emac_instance *dev)
 
 	memset(gaht_temp, 0, sizeof (gaht_temp));
 
-	for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
+	netdev_for_each_mc_addr(dmi, dev->ndev) {
 		int slot, reg, mask;
 		DBG2(dev, "mc %pM" NL, dmi->dmi_addr);
 
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 052c74091d91..b5d0f4e973f7 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -420,7 +420,7 @@ static void InitBoard(struct net_device *dev)
 	/* start putting the multicast addresses into the CAM list.  Stop if
 	   it is full. */
 
-	for (mcptr = dev->mc_list; mcptr != NULL; mcptr = mcptr->next) {
+	netdev_for_each_mc_addr(mcptr, dev) {
 		putcam(cams, &camcnt, mcptr->dmi_addr);
 		if (camcnt == 16)
 			break;
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 41b9c0efcbdd..f2b937966950 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1072,8 +1072,7 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
 			ibmveth_error_printk("h_multicast_ctrl rc=%ld when entering promisc mode\n", lpar_rc);
 		}
 	} else {
-		struct dev_mc_list *mclist = netdev->mc_list;
-		int i;
+		struct dev_mc_list *mclist;
 		/* clear the filter table & disable filtering */
 		lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
 					   IbmVethMcastEnableRecv |
@@ -1084,7 +1083,7 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
 			ibmveth_error_printk("h_multicast_ctrl rc=%ld when attempting to clear filter table\n", lpar_rc);
 		}
 		/* add the addresses to the filter table */
-		for(i = 0; i < netdev_mc_count(netdev); ++i, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, netdev) {
 			// add the multicast address to the filter table
 			unsigned long mcast_addr = 0;
 			memcpy(((char *)&mcast_addr)+2, mclist->dmi_addr, 6);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index f588e49c65f1..583a21c1def3 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2877,7 +2877,7 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	struct dev_mc_list *mc_ptr = netdev->mc_list;
+	struct dev_mc_list *mc_ptr;
 	u8  *mta_list;
 	int i;
 
@@ -2893,14 +2893,10 @@ static int igb_write_mc_addr_list(struct net_device *netdev)
 		return -ENOMEM;
 
 	/* The shared function expects a packed array of only addresses. */
-	mc_ptr = netdev->mc_list;
+	i = 0;
+	netdev_for_each_mc_addr(mc_ptr, netdev)
+		memcpy(mta_list + (i++ * ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
 
-	for (i = 0; i < netdev_mc_count(netdev); i++) {
-		if (!mc_ptr)
-			break;
-		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
-		mc_ptr = mc_ptr->next;
-	}
 	igb_update_mc_addr_list(hw, mta_list, i);
 	kfree(mta_list);
 
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 6029c400f2be..a77afd8a14bb 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -1413,15 +1413,9 @@ static void igbvf_set_multi(struct net_device *netdev)
 	}
 
 	/* prepare a packed array of only addresses. */
-	mc_ptr = netdev->mc_list;
-
-	for (i = 0; i < netdev_mc_count(netdev); i++) {
-		if (!mc_ptr)
-			break;
-		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr,
-		       ETH_ALEN);
-		mc_ptr = mc_ptr->next;
-	}
+	i = 0;
+	netdev_for_each_mc_addr(mc_ptr, netdev)
+		memcpy(mta_list + (i++ * ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
 
 	hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0);
 	kfree(mta_list);
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 0bd5fef22d49..70871b9b045a 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1664,11 +1664,10 @@ static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 static void ioc3_set_multicast_list(struct net_device *dev)
 {
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	struct ioc3_private *ip = netdev_priv(dev);
 	struct ioc3 *ioc3 = ip->regs;
 	u64 ehar = 0;
-	int i;
 
 	netif_stop_queue(dev);				/* Lock out others. */
 
@@ -1689,9 +1688,8 @@ static void ioc3_set_multicast_list(struct net_device *dev)
 			ip->ehar_h = 0xffffffff;
 			ip->ehar_l = 0xffffffff;
 		} else {
-			for (i = 0; i < netdev_mc_count(dev); i++) {
+			netdev_for_each_mc_addr(dmi, dev) {
 				char *addr = dmi->dmi_addr;
-				dmi = dmi->next;
 
 				if (!(*addr & 1))
 					continue;
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 3ca49e348c9d..150415e83f61 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -608,8 +608,7 @@ static void ipg_nic_set_multicast_list(struct net_device *dev)
 	hashtable[1] = 0x00000000;
 
 	/* Cycle through all multicast addresses to filter. */
-	for (mc_list_ptr = dev->mc_list;
-	     mc_list_ptr != NULL; mc_list_ptr = mc_list_ptr->next) {
+	netdev_for_each_mc_addr(mc_list_ptr, dev) {
 		/* Calculate CRC result for each multicast address. */
 		hashindex = crc32_le(0xffffffff, mc_list_ptr->dmi_addr,
 				     ETH_ALEN);
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index bb4a3cda6e4b..d09e4d3a15a6 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -666,7 +666,7 @@ set_multicast_list(struct net_device *dev)
 	else if (!netdev_mc_empty(dev))
 	{
 		/* Walk the address list, and load the filter */
-		hardware_set_filter(dev->mc_list);
+		hardware_set_filter(dev);
 
 		outw(MULTICAST, ioaddr);
 	}
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index ff015e15f5d1..966de5d69521 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -961,15 +961,14 @@ static void veth_set_multicast_list(struct net_device *dev)
 			(netdev_mc_count(dev) > VETH_MAX_MCAST)) {
 		port->promiscuous = 1;
 	} else {
-		struct dev_mc_list *dmi = dev->mc_list;
-		int i;
+		struct dev_mc_list *dmi;
 
 		port->promiscuous = 0;
 
 		/* Update table */
 		port->num_mcast = 0;
 
-		for (i = 0; i < netdev_mc_count(dev); i++) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			u8 *addr = dmi->dmi_addr;
 			u64 xaddr = 0;
 
@@ -978,7 +977,6 @@ static void veth_set_multicast_list(struct net_device *dev)
 				port->mcast_addr[port->num_mcast] = xaddr;
 				port->num_mcast++;
 			}
-			dmi = dmi->next;
 		}
 	}
 
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 93d018505ebb..c9fef65cb98b 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1088,10 +1088,9 @@ ixgb_set_multi(struct net_device *netdev)
 
 		IXGB_WRITE_REG(hw, RCTL, rctl);
 
-		for (i = 0, mc_ptr = netdev->mc_list;
-		     mc_ptr;
-		     i++, mc_ptr = mc_ptr->next)
-			memcpy(&mta[i * IXGB_ETH_LENGTH_OF_ADDRESS],
+		i = 0;
+		netdev_for_each_mc_addr(mc_ptr, netdev)
+			memcpy(&mta[i++ * IXGB_ETH_LENGTH_OF_ADDRESS],
 			       mc_ptr->dmi_addr, IXGB_ETH_LENGTH_OF_ADDRESS);
 
 		ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
-- 
cgit v1.2.3


From 35e2da46d25a53e0e19956f533cc29272a6cceb2 Mon Sep 17 00:00:00 2001
From: Sriram <srk@ti.com>
Date: Mon, 22 Feb 2010 03:35:36 +0000
Subject: can:ti_hecc: Add pm hook-up

Added the suspend and resume implementation in the HECC (CAN)
driver.

Signed-off-by: K R Baalaaji <krbaalaaji@ti.com>
Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Anant Gole <anantgole@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/ti_hecc.c | 51 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 48 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 8332e242b0be..b861cd561074 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -826,7 +826,6 @@ static int ti_hecc_open(struct net_device *ndev)
 		return err;
 	}
 
-	clk_enable(priv->clk);
 	ti_hecc_start(ndev);
 	napi_enable(&priv->napi);
 	netif_start_queue(ndev);
@@ -842,7 +841,6 @@ static int ti_hecc_close(struct net_device *ndev)
 	napi_disable(&priv->napi);
 	ti_hecc_stop(ndev);
 	free_irq(ndev->irq, ndev);
-	clk_disable(priv->clk);
 	close_candev(ndev);
 
 	return 0;
@@ -928,6 +926,7 @@ static int ti_hecc_probe(struct platform_device *pdev)
 	netif_napi_add(ndev, &priv->napi, ti_hecc_rx_poll,
 		HECC_DEF_NAPI_WEIGHT);
 
+	clk_enable(priv->clk);
 	err = register_candev(ndev);
 	if (err) {
 		dev_err(&pdev->dev, "register_candev() failed\n");
@@ -956,6 +955,7 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct ti_hecc_priv *priv = netdev_priv(ndev);
 
+	clk_disable(priv->clk);
 	clk_put(priv->clk);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	iounmap(priv->base);
@@ -967,6 +967,48 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+
+#ifdef CONFIG_PM
+static int ti_hecc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct ti_hecc_priv *priv = netdev_priv(dev);
+
+	if (netif_running(dev)) {
+		netif_stop_queue(dev);
+		netif_device_detach(dev);
+	}
+
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_PDR);
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	clk_disable(priv->clk);
+
+	return 0;
+}
+
+static int ti_hecc_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct ti_hecc_priv *priv = netdev_priv(dev);
+
+	clk_enable(priv->clk);
+
+	hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_PDR);
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(dev)) {
+		netif_device_attach(dev);
+		netif_start_queue(dev);
+	}
+
+	return 0;
+}
+#else
+#define ti_hecc_suspend NULL
+#define ti_hecc_resume NULL
+#endif
+
 /* TI HECC netdevice driver: platform driver structure */
 static struct platform_driver ti_hecc_driver = {
 	.driver = {
@@ -975,6 +1017,8 @@ static struct platform_driver ti_hecc_driver = {
 	},
 	.probe = ti_hecc_probe,
 	.remove = __devexit_p(ti_hecc_remove),
+	.suspend = ti_hecc_suspend,
+	.resume = ti_hecc_resume,
 };
 
 static int __init ti_hecc_init_driver(void)
@@ -982,14 +1026,15 @@ static int __init ti_hecc_init_driver(void)
 	printk(KERN_INFO DRV_DESC "\n");
 	return platform_driver_register(&ti_hecc_driver);
 }
-module_init(ti_hecc_init_driver);
 
 static void __exit ti_hecc_exit_driver(void)
 {
 	printk(KERN_INFO DRV_DESC " unloaded\n");
 	platform_driver_unregister(&ti_hecc_driver);
 }
+
 module_exit(ti_hecc_exit_driver);
+module_init(ti_hecc_init_driver);
 
 MODULE_AUTHOR("Anant Gole <anantgole@ti.com>");
 MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 10886af54a2478f97f2d5f89bbe270b99206f8ab Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Tue, 23 Feb 2010 01:19:22 -0800
Subject: e1000: correct wrong coding style for "else"

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index c99f95c1b418..319c2b5281e9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2170,8 +2170,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			hash_bit = hash_value & 0x1F;
 			mta = (1 << hash_bit);
 			mcarray[hash_reg] |= mta;
-		}
-		else {
+		} else {
 			e1000_rar_set(hw, mc_ptr->da_addr, i++);
 		}
 	}
-- 
cgit v1.2.3


From b5abb028e214cca68f4231d4f3bc0847ddbc986e Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Fri, 19 Feb 2010 17:54:53 +0000
Subject: e1000: Fix DMA mapping error handling on RX

Check for error return from pci_map_single/pci_map_page and clean up.

With this and the previous patch the driver was able to handle a significant
percentage of errors (I set the fault injection rate to 10% and could still
download large files at a reasonable speed).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_main.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d29bb532eccf..765543663a4f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4006,11 +4006,21 @@ check_page:
 			}
 		}
 
-		if (!buffer_info->dma)
+		if (!buffer_info->dma) {
 			buffer_info->dma = pci_map_page(pdev,
 			                                buffer_info->page, 0,
 			                                buffer_info->length,
 			                                PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+				put_page(buffer_info->page);
+				dev_kfree_skb(skb);
+				buffer_info->page = NULL;
+				buffer_info->skb = NULL;
+				buffer_info->dma = 0;
+				adapter->alloc_rx_buff_failed++;
+				break; /* while !buffer_info->skb */
+			}
+		}
 
 		rx_desc = E1000_RX_DESC(*rx_ring, i);
 		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
@@ -4101,6 +4111,13 @@ map_skb:
 						  skb->data,
 						  buffer_info->length,
 						  PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+			dev_kfree_skb(skb);
+			buffer_info->skb = NULL;
+			buffer_info->dma = 0;
+			adapter->alloc_rx_buff_failed++;
+			break; /* while !buffer_info->skb */
+		}
 
 		/*
 		 * XXX if it was allocated cleanly it will never map to a
-- 
cgit v1.2.3


From cac43a1b7b091b17113502e4128dcb0ff7e3503d Mon Sep 17 00:00:00 2001
From: Torgny Johansson <torgny.johansson@gmail.com>
Date: Fri, 19 Feb 2010 01:59:15 +0000
Subject: cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)

This patch adds a new vid/pid to the cdc_ether whitelist.

Device added:
- Ericsson Mobile Broadband variant C3607w

Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/cdc_ether.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4f27f022fbf7..5f3b9eaeb04f 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -583,6 +583,11 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long) &mbm_info,
+}, {
+	/* Ericsson C3607w ver 2 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
-- 
cgit v1.2.3


From 662a96bd6f020782dfbdc0d0bd177c7dbb556687 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 19 Feb 2010 05:13:58 +0000
Subject: tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON

The netif_wake_queue() is called correctly (i.e. only on !txfull
condition) from txdone routine.  So Unconditional call to the
netif_wake_queue() here is wrong.  This might cause calling of
start_xmit routine on txfull state and trigger BUG_ON.

This bug does not happen when NAPI disabled.  After txdone there
must be at least one free tx slot.  But with NAPI, this is not
true anymore and the BUG_ON can hits on heavy load.

In this driver NAPI was enabled on 2.6.33-rc1 so this is
regression from 2.6.32 kernel.

Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tc35815.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 75a669d48e5e..d71c1976072e 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1437,7 +1437,6 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
 		/* Transmit complete. */
 		lp->lstats.tx_ints++;
 		tc35815_txdone(dev);
-		netif_wake_queue(dev);
 		if (ret < 0)
 			ret = 0;
 	}
-- 
cgit v1.2.3


From ab9bdc34d68dafc6fea0ba733231f1c9696ce9c4 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Tue, 23 Feb 2010 14:02:52 -0800
Subject: Revert "iwlwifi: Monitor and recover the aggregation TX flow failure"

This reverts commit 1db5950f1d0b82e07371b211a48317b8972da063.

The goal of "iwlwifi: Monitor and recover the aggregation TX flow failure"
is to first detect when data transmission stalls and then to recover from
this situation with a reset of the radio or the firmware, depending on how
bad the transmission failures are.

Unfortunately we have found that this change causes excessive resets with
its current detection algorithm. It also performs its recovery action when
none is really needed, like when we are not associated.

Revert this change until the issues have been addressed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 14 +----------
 drivers/net/wireless/iwlwifi/iwl-dev.h |  3 ---
 drivers/net/wireless/iwlwifi/iwl-rx.c  | 46 ----------------------------------
 3 files changed, 1 insertion(+), 62 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c5b724eaf306..1fac015efc19 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2941,21 +2941,10 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			return ret;
 	case IEEE80211_AMPDU_TX_START:
 		IWL_DEBUG_HT(priv, "start Tx\n");
-		ret = iwl_tx_agg_start(priv, sta->addr, tid, ssn);
-		if (ret == 0) {
-			priv->agg_tids_count++;
-			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
-				priv->agg_tids_count);
-		}
-		return ret;
+		return iwl_tx_agg_start(priv, sta->addr, tid, ssn);
 	case IEEE80211_AMPDU_TX_STOP:
 		IWL_DEBUG_HT(priv, "stop Tx\n");
 		ret = iwl_tx_agg_stop(priv, sta->addr, tid);
-		if ((ret == 0) && (priv->agg_tids_count > 0)) {
-			priv->agg_tids_count--;
-			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
-				priv->agg_tids_count);
-		}
 		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 			return 0;
 		else
@@ -3376,7 +3365,6 @@ static int iwl_init_drv(struct iwl_priv *priv)
 	priv->iw_mode = NL80211_IFTYPE_STATION;
 	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
 	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
-	priv->agg_tids_count = 0;
 
 	/* initialize force reset */
 	priv->force_reset[IWL_RF_RESET].reset_duration =
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 7914d65a5a55..ab891b958042 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1084,9 +1084,6 @@ struct iwl_priv {
 	/* storing the jiffies when the plcp error rate is received */
 	unsigned long plcp_jiffies;
 
-	/* reporting the number of tids has AGG on. 0 means no AGGREGATION */
-	u8 agg_tids_count;
-
 	/* force reset */
 	struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index fed554accedc..aba8f4c20c1b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -616,11 +616,6 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
 
 #define REG_RECALIB_PERIOD (60)
 
-/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
-#define ACK_CNT_RATIO (50)
-#define BA_TIMEOUT_CNT (5)
-#define BA_TIMEOUT_MAX (16)
-
 #define PLCP_MSG "plcp_err exceeded %u, %u, %u, %u, %u, %d, %u mSecs\n"
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb)
@@ -630,9 +625,6 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 	int combined_plcp_delta;
 	unsigned int plcp_msec;
 	unsigned long plcp_received_jiffies;
-	int actual_ack_cnt_delta;
-	int expected_ack_cnt_delta;
-	int ba_timeout_delta;
 
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics),
@@ -647,44 +639,6 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 #ifdef CONFIG_IWLWIFI_DEBUG
 	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
 #endif
-	actual_ack_cnt_delta = le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
-		le32_to_cpu(priv->statistics.tx.actual_ack_cnt);
-	expected_ack_cnt_delta = le32_to_cpu(
-			pkt->u.stats.tx.expected_ack_cnt) -
-		le32_to_cpu(priv->statistics.tx.expected_ack_cnt);
-	ba_timeout_delta = le32_to_cpu(
-			pkt->u.stats.tx.agg.ba_timeout) -
-		le32_to_cpu(priv->statistics.tx.agg.ba_timeout);
-	if ((priv->agg_tids_count > 0) &&
-		(expected_ack_cnt_delta > 0) &&
-		(((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta) <
-			ACK_CNT_RATIO) &&
-		(ba_timeout_delta > BA_TIMEOUT_CNT)) {
-		IWL_DEBUG_RADIO(priv,
-			"actual_ack_cnt delta = %d, expected_ack_cnt = %d\n",
-			actual_ack_cnt_delta, expected_ack_cnt_delta);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-		IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
-			priv->delta_statistics.tx.rx_detected_cnt);
-		IWL_DEBUG_RADIO(priv,
-			"ack_or_ba_timeout_collision delta = %d\n",
-			priv->delta_statistics.tx.ack_or_ba_timeout_collision);
-#endif
-		IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
-			ba_timeout_delta);
-		if ((actual_ack_cnt_delta == 0) &&
-			(ba_timeout_delta >=
-				BA_TIMEOUT_MAX)) {
-			IWL_DEBUG_RADIO(priv,
-				"call iwl_force_reset(IWL_FW_RESET)\n");
-			iwl_force_reset(priv, IWL_FW_RESET);
-		} else {
-			IWL_DEBUG_RADIO(priv,
-				"call iwl_force_reset(IWL_RF_RESET)\n");
-			iwl_force_reset(priv, IWL_RF_RESET);
-		}
-	}
 	/*
 	 * check for plcp_err and trigger radio reset if it exceeds
 	 * the plcp error threshold plcp_delta.
-- 
cgit v1.2.3


From 89612124d6d62230043ebd827a2b54ea5ea5280c Mon Sep 17 00:00:00 2001
From: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Date: Fri, 19 Feb 2010 11:49:49 -0800
Subject: iwlwifi: increase command buffer size

Increase the buffer size for commands with "huge"
bit set. This has been recently observed for 6050 cards where
for even with huge bit set few commands were not properly allocated
memory with the command overwriting the buffer allocated for it..
Also add a check to see if command size exceeds the
maximum allowable size.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h |  1 +
 drivers/net/wireless/iwlwifi/iwl-tx.c       | 11 +++++++----
 2 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index e91507531923..cfd6c8423113 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2612,6 +2612,7 @@ struct iwl_ssid_ie {
 #define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
 #define IWL_GOOD_CRC_TH			cpu_to_le16(1)
 #define IWL_MAX_SCAN_SIZE 1024
+#define IWL_MAX_CMD_SIZE 4096
 #define IWL_MAX_PROBE_REQUEST		200
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 8f4071562857..066491fc75f2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -366,7 +366,7 @@ int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 	for (i = 0; i < actual_slots; i++) {
 		/* only happens for cmd queue */
 		if (i == slots_num)
-			len += IWL_MAX_SCAN_SIZE;
+			len = IWL_MAX_CMD_SIZE;
 
 		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
 		if (!txq->cmd[i])
@@ -1027,9 +1027,12 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 
 	/* If any of the command structures end up being larger than
 	 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
-	 * we will need to increase the size of the TFD entries */
+	 * we will need to increase the size of the TFD entries
+	 * Also, check to see if command buffer should not exceed the size
+	 * of device_cmd and max_cmd_size. */
 	BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
 	       !(cmd->flags & CMD_SIZE_HUGE));
+	BUG_ON(fix_size > IWL_MAX_CMD_SIZE);
 
 	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
 		IWL_WARN(priv, "Not sending command - %s KILL\n",
@@ -1073,8 +1076,8 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	if (cmd->flags & CMD_SIZE_HUGE)
 		out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
 	len = sizeof(struct iwl_device_cmd);
-	len += (idx == TFD_CMD_SLOTS) ?  IWL_MAX_SCAN_SIZE : 0;
-
+	if (idx == TFD_CMD_SLOTS)
+		len = IWL_MAX_CMD_SIZE;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	switch (out_cmd->hdr.cmd) {
-- 
cgit v1.2.3


From e998f245c4b2d36ae2c35446e54ccbf1fb29d9de Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Wed, 27 Jan 2010 17:03:34 +0000
Subject: RDMA/cxgb3: Doorbell overflow avoidance and recovery

T3 hardware doorbell FIFO overflows can cause application stalls due
to lost doorbell ring events.  This has been seen when running large
NP IMB alltoall MPI jobs.  The T3 hardware supports an xon/xoff-type
flow control mechanism to help avoid overflowing the HW doorbell FIFO.

This patch uses these interrupts to disable RDMA QP doorbell rings
when we near an overflow condition, and then turn them back on (and
ring all the active QP doorbells) when when the doorbell FIFO empties
out.  In addition if an doorbell ring is dropped by the hardware, the
code will now recover.

Design:

cxgb3:
- enable these DB interrupts
- in the interrupt handler, schedule work tasks to call the ULPs event
  handlers with the new events.
- ring all the qset txqs when an overflow is detected.

iw_cxgb3:
- disable db ringing on all active qps when we get the DB_FULL event
- enable db ringing on all active qps and ring all active dbs when we get
  the DB_EMPTY event
- On DB_DROP event:
       - disable db rings in the event handler
       - delay-schedule a work task which rings and enables the dbs on
         all active qps.
- in post_send and post_recv logic, don't ring the db if it's disabled.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/cxio_wr.h | 17 +++++++-
 drivers/infiniband/hw/cxgb3/iwch.c    | 79 +++++++++++++++++++++++++++++++++--
 drivers/infiniband/hw/cxgb3/iwch.h    |  2 +
 drivers/infiniband/hw/cxgb3/iwch_qp.c |  9 ++--
 drivers/net/cxgb3/adapter.h           |  5 +++
 drivers/net/cxgb3/cxgb3_main.c        | 57 ++++++++++++++++++++++++-
 drivers/net/cxgb3/cxgb3_offload.h     |  5 ++-
 drivers/net/cxgb3/regs.h              | 16 +++++++
 drivers/net/cxgb3/sge.c               | 10 ++++-
 drivers/net/cxgb3/t3_hw.c             |  5 ++-
 10 files changed, 192 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h
index a197a5b7ac7f..15073b2da1c5 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_wr.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h
@@ -730,7 +730,22 @@ struct t3_cq {
 
 static inline void cxio_set_wq_in_error(struct t3_wq *wq)
 {
-	wq->queue->wq_in_err.err = 1;
+	wq->queue->wq_in_err.err |= 1;
+}
+
+static inline void cxio_disable_wq_db(struct t3_wq *wq)
+{
+	wq->queue->wq_in_err.err |= 2;
+}
+
+static inline void cxio_enable_wq_db(struct t3_wq *wq)
+{
+	wq->queue->wq_in_err.err &= ~2;
+}
+
+static inline int cxio_wq_db_enabled(struct t3_wq *wq)
+{
+	return !(wq->queue->wq_in_err.err & 2);
 }
 
 static inline struct t3_cqe *cxio_next_hw_cqe(struct t3_cq *cq)
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index b0ea0105ddf6..d992543890ee 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -65,6 +65,46 @@ struct cxgb3_client t3c_client = {
 static LIST_HEAD(dev_list);
 static DEFINE_MUTEX(dev_mutex);
 
+static int disable_qp_db(int id, void *p, void *data)
+{
+	struct iwch_qp *qhp = p;
+
+	cxio_disable_wq_db(&qhp->wq);
+	return 0;
+}
+
+static int enable_qp_db(int id, void *p, void *data)
+{
+	struct iwch_qp *qhp = p;
+
+	if (data)
+		ring_doorbell(qhp->rhp->rdev.ctrl_qp.doorbell, qhp->wq.qpid);
+	cxio_enable_wq_db(&qhp->wq);
+	return 0;
+}
+
+static void disable_dbs(struct iwch_dev *rnicp)
+{
+	spin_lock_irq(&rnicp->lock);
+	idr_for_each(&rnicp->qpidr, disable_qp_db, NULL);
+	spin_unlock_irq(&rnicp->lock);
+}
+
+static void enable_dbs(struct iwch_dev *rnicp, int ring_db)
+{
+	spin_lock_irq(&rnicp->lock);
+	idr_for_each(&rnicp->qpidr, enable_qp_db,
+		     (void *)(unsigned long)ring_db);
+	spin_unlock_irq(&rnicp->lock);
+}
+
+static void iwch_db_drop_task(struct work_struct *work)
+{
+	struct iwch_dev *rnicp = container_of(work, struct iwch_dev,
+					      db_drop_task.work);
+	enable_dbs(rnicp, 1);
+}
+
 static void rnic_init(struct iwch_dev *rnicp)
 {
 	PDBG("%s iwch_dev %p\n", __func__,  rnicp);
@@ -72,6 +112,7 @@ static void rnic_init(struct iwch_dev *rnicp)
 	idr_init(&rnicp->qpidr);
 	idr_init(&rnicp->mmidr);
 	spin_lock_init(&rnicp->lock);
+	INIT_DELAYED_WORK(&rnicp->db_drop_task, iwch_db_drop_task);
 
 	rnicp->attr.max_qps = T3_MAX_NUM_QP - 32;
 	rnicp->attr.max_wrs = T3_MAX_QP_DEPTH;
@@ -147,6 +188,7 @@ static void close_rnic_dev(struct t3cdev *tdev)
 	mutex_lock(&dev_mutex);
 	list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
 		if (dev->rdev.t3cdev_p == tdev) {
+			cancel_delayed_work_sync(&dev->db_drop_task);
 			list_del(&dev->entry);
 			iwch_unregister_device(dev);
 			cxio_rdev_close(&dev->rdev);
@@ -165,7 +207,8 @@ static void iwch_event_handler(struct t3cdev *tdev, u32 evt, u32 port_id)
 	struct cxio_rdev *rdev = tdev->ulp;
 	struct iwch_dev *rnicp;
 	struct ib_event event;
-	u32    portnum = port_id + 1;
+	u32 portnum = port_id + 1;
+	int dispatch = 0;
 
 	if (!rdev)
 		return;
@@ -174,21 +217,49 @@ static void iwch_event_handler(struct t3cdev *tdev, u32 evt, u32 port_id)
 	case OFFLOAD_STATUS_DOWN: {
 		rdev->flags = CXIO_ERROR_FATAL;
 		event.event  = IB_EVENT_DEVICE_FATAL;
+		dispatch = 1;
 		break;
 		}
 	case OFFLOAD_PORT_DOWN: {
 		event.event  = IB_EVENT_PORT_ERR;
+		dispatch = 1;
 		break;
 		}
 	case OFFLOAD_PORT_UP: {
 		event.event  = IB_EVENT_PORT_ACTIVE;
+		dispatch = 1;
+		break;
+		}
+	case OFFLOAD_DB_FULL: {
+		disable_dbs(rnicp);
+		break;
+		}
+	case OFFLOAD_DB_EMPTY: {
+		enable_dbs(rnicp, 1);
+		break;
+		}
+	case OFFLOAD_DB_DROP: {
+		unsigned long delay = 1000;
+		unsigned short r;
+
+		disable_dbs(rnicp);
+		get_random_bytes(&r, 2);
+		delay += r & 1023;
+
+		/*
+		 * delay is between 1000-2023 usecs.
+		 */
+		schedule_delayed_work(&rnicp->db_drop_task,
+			usecs_to_jiffies(delay));
 		break;
 		}
 	}
 
-	event.device = &rnicp->ibdev;
-	event.element.port_num = portnum;
-	ib_dispatch_event(&event);
+	if (dispatch) {
+		event.device = &rnicp->ibdev;
+		event.element.port_num = portnum;
+		ib_dispatch_event(&event);
+	}
 
 	return;
 }
diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h
index 84735506333f..a1c44578e039 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.h
+++ b/drivers/infiniband/hw/cxgb3/iwch.h
@@ -36,6 +36,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
+#include <linux/workqueue.h>
 
 #include <rdma/ib_verbs.h>
 
@@ -110,6 +111,7 @@ struct iwch_dev {
 	struct idr mmidr;
 	spinlock_t lock;
 	struct list_head entry;
+	struct delayed_work db_drop_task;
 };
 
 static inline struct iwch_dev *to_iwch_dev(struct ib_device *ibdev)
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 3eb8cecf81d7..b4d893de3650 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -452,7 +452,8 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		++(qhp->wq.sq_wptr);
 	}
 	spin_unlock_irqrestore(&qhp->lock, flag);
-	ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid);
+	if (cxio_wq_db_enabled(&qhp->wq))
+		ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid);
 
 out:
 	if (err)
@@ -514,7 +515,8 @@ int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		num_wrs--;
 	}
 	spin_unlock_irqrestore(&qhp->lock, flag);
-	ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid);
+	if (cxio_wq_db_enabled(&qhp->wq))
+		ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid);
 
 out:
 	if (err)
@@ -597,7 +599,8 @@ int iwch_bind_mw(struct ib_qp *qp,
 	++(qhp->wq.sq_wptr);
 	spin_unlock_irqrestore(&qhp->lock, flag);
 
-	ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid);
+	if (cxio_wq_db_enabled(&qhp->wq))
+		ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid);
 
 	return err;
 }
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 3e8618b4efbc..4cd7f420766a 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -264,6 +264,10 @@ struct adapter {
 	struct work_struct fatal_error_handler_task;
 	struct work_struct link_fault_handler_task;
 
+	struct work_struct db_full_task;
+	struct work_struct db_empty_task;
+	struct work_struct db_drop_task;
+
 	struct dentry *debugfs_root;
 
 	struct mutex mdio_lock;
@@ -335,6 +339,7 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
 		unsigned char *data);
 irqreturn_t t3_sge_intr_msix(int irq, void *cookie);
+extern struct workqueue_struct *cxgb3_wq;
 
 int t3_get_edc_fw(struct cphy *phy, int edc_idx, int size);
 
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 89bec9c3c141..37945fce7fa5 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -45,6 +45,7 @@
 #include <linux/firmware.h>
 #include <linux/log2.h>
 #include <linux/stringify.h>
+#include <linux/sched.h>
 #include <asm/uaccess.h>
 
 #include "common.h"
@@ -140,7 +141,7 @@ MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not");
  * will block keventd as it needs the rtnl lock, and we'll deadlock waiting
  * for our work to complete.  Get our own work queue to solve this.
  */
-static struct workqueue_struct *cxgb3_wq;
+struct workqueue_struct *cxgb3_wq;
 
 /**
  *	link_report - show link status and link speed/duplex
@@ -590,6 +591,19 @@ static void setup_rss(struct adapter *adap)
 		      V_RRCPLCPUSIZE(6) | F_HASHTOEPLITZ, cpus, rspq_map);
 }
 
+static void ring_dbs(struct adapter *adap)
+{
+	int i, j;
+
+	for (i = 0; i < SGE_QSETS; i++) {
+		struct sge_qset *qs = &adap->sge.qs[i];
+
+		if (qs->adap)
+			for (j = 0; j < SGE_TXQ_PER_SET; j++)
+				t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX | V_EGRCNTX(qs->txq[j].cntxt_id));
+	}
+}
+
 static void init_napi(struct adapter *adap)
 {
 	int i;
@@ -2754,6 +2768,42 @@ static void t3_adap_check_task(struct work_struct *work)
 	spin_unlock_irq(&adapter->work_lock);
 }
 
+static void db_full_task(struct work_struct *work)
+{
+	struct adapter *adapter = container_of(work, struct adapter,
+					       db_full_task);
+
+	cxgb3_event_notify(&adapter->tdev, OFFLOAD_DB_FULL, 0);
+}
+
+static void db_empty_task(struct work_struct *work)
+{
+	struct adapter *adapter = container_of(work, struct adapter,
+					       db_empty_task);
+
+	cxgb3_event_notify(&adapter->tdev, OFFLOAD_DB_EMPTY, 0);
+}
+
+static void db_drop_task(struct work_struct *work)
+{
+	struct adapter *adapter = container_of(work, struct adapter,
+					       db_drop_task);
+	unsigned long delay = 1000;
+	unsigned short r;
+
+	cxgb3_event_notify(&adapter->tdev, OFFLOAD_DB_DROP, 0);
+
+	/*
+	 * Sleep a while before ringing the driver qset dbs.
+	 * The delay is between 1000-2023 usecs.
+	 */
+	get_random_bytes(&r, 2);
+	delay += r & 1023;
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(delay));
+	ring_dbs(adapter);
+}
+
 /*
  * Processes external (PHY) interrupts in process context.
  */
@@ -3222,6 +3272,11 @@ static int __devinit init_one(struct pci_dev *pdev,
 	INIT_LIST_HEAD(&adapter->adapter_list);
 	INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task);
 	INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task);
+
+	INIT_WORK(&adapter->db_full_task, db_full_task);
+	INIT_WORK(&adapter->db_empty_task, db_empty_task);
+	INIT_WORK(&adapter->db_drop_task, db_drop_task);
+
 	INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
 
 	for (i = 0; i < ai->nports0 + ai->nports1; ++i) {
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h
index 670aa62042da..929c298115ca 100644
--- a/drivers/net/cxgb3/cxgb3_offload.h
+++ b/drivers/net/cxgb3/cxgb3_offload.h
@@ -73,7 +73,10 @@ enum {
 	OFFLOAD_STATUS_UP,
 	OFFLOAD_STATUS_DOWN,
 	OFFLOAD_PORT_DOWN,
-	OFFLOAD_PORT_UP
+	OFFLOAD_PORT_UP,
+	OFFLOAD_DB_FULL,
+	OFFLOAD_DB_EMPTY,
+	OFFLOAD_DB_DROP
 };
 
 struct cxgb3_client {
diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/cxgb3/regs.h
index 1b5327b5a965..cb42353c9fdd 100644
--- a/drivers/net/cxgb3/regs.h
+++ b/drivers/net/cxgb3/regs.h
@@ -254,6 +254,22 @@
 #define V_LOPIODRBDROPERR(x) ((x) << S_LOPIODRBDROPERR)
 #define F_LOPIODRBDROPERR    V_LOPIODRBDROPERR(1U)
 
+#define S_HIPRIORITYDBFULL    7
+#define V_HIPRIORITYDBFULL(x) ((x) << S_HIPRIORITYDBFULL)
+#define F_HIPRIORITYDBFULL    V_HIPRIORITYDBFULL(1U)
+
+#define S_HIPRIORITYDBEMPTY   6
+#define V_HIPRIORITYDBEMPTY(x) ((x) << S_HIPRIORITYDBEMPTY)
+#define F_HIPRIORITYDBEMPTY    V_HIPRIORITYDBEMPTY(1U)
+
+#define S_LOPRIORITYDBFULL    5
+#define V_LOPRIORITYDBFULL(x) ((x) << S_LOPRIORITYDBFULL)
+#define F_LOPRIORITYDBFULL    V_LOPRIORITYDBFULL(1U)
+
+#define S_LOPRIORITYDBEMPTY   4
+#define V_LOPRIORITYDBEMPTY(x) ((x) << S_LOPRIORITYDBEMPTY)
+#define F_LOPRIORITYDBEMPTY    V_LOPRIORITYDBEMPTY(1U)
+
 #define S_RSPQDISABLED    3
 #define V_RSPQDISABLED(x) ((x) << S_RSPQDISABLED)
 #define F_RSPQDISABLED    V_RSPQDISABLED(1U)
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 318a018ca7c5..9b434461c4f1 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -42,6 +42,7 @@
 #include "sge_defs.h"
 #include "t3_cpl.h"
 #include "firmware_exports.h"
+#include "cxgb3_offload.h"
 
 #define USE_GTS 0
 
@@ -2833,8 +2834,13 @@ void t3_sge_err_intr_handler(struct adapter *adapter)
 	}
 
 	if (status & (F_HIPIODRBDROPERR | F_LOPIODRBDROPERR))
-		CH_ALERT(adapter, "SGE dropped %s priority doorbell\n",
-			 status & F_HIPIODRBDROPERR ? "high" : "lo");
+		queue_work(cxgb3_wq, &adapter->db_drop_task);
+
+	if (status & (F_HIPRIORITYDBFULL | F_LOPRIORITYDBFULL))
+		queue_work(cxgb3_wq, &adapter->db_full_task);
+
+	if (status & (F_HIPRIORITYDBEMPTY | F_LOPRIORITYDBEMPTY))
+		queue_work(cxgb3_wq, &adapter->db_empty_task);
 
 	t3_write_reg(adapter, A_SG_INT_CAUSE, status);
 	if (status &  SGE_FATALERR)
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 032cfe065570..c38fc717a0d1 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1432,7 +1432,10 @@ static int t3_handle_intr_status(struct adapter *adapter, unsigned int reg,
 		       F_IRPARITYERROR | V_ITPARITYERROR(M_ITPARITYERROR) | \
 		       V_FLPARITYERROR(M_FLPARITYERROR) | F_LODRBPARITYERROR | \
 		       F_HIDRBPARITYERROR | F_LORCQPARITYERROR | \
-		       F_HIRCQPARITYERROR)
+		       F_HIRCQPARITYERROR | F_LOPRIORITYDBFULL | \
+		       F_HIPRIORITYDBFULL | F_LOPRIORITYDBEMPTY | \
+		       F_HIPRIORITYDBEMPTY | F_HIPIODRBDROPERR | \
+		       F_LOPIODRBDROPERR)
 #define MC5_INTR_MASK (F_PARITYERR | F_ACTRGNFULL | F_UNKNOWNCMD | \
 		       F_REQQPARERR | F_DISPQPARERR | F_DELACTEMPTY | \
 		       F_NFASRCHFAIL)
-- 
cgit v1.2.3


From 9abd5438641425c2f8a3a399c921747a4fb55adc Mon Sep 17 00:00:00 2001
From: Yegor Yefremov <yegor_sub1@visionsystems.de>
Date: Mon, 22 Feb 2010 05:47:58 +0000
Subject: KS8695: Don't call netif_carrier_off() from ndo_stop()

netif_carrier_on() and netif_carrier_off() should be called from
link status interrupt handler

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/arm/ks8695net.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 238069699515..8ca639127dbc 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -1333,7 +1333,6 @@ ks8695_stop(struct net_device *ndev)
 
 	netif_stop_queue(ndev);
 	napi_disable(&ksp->napi);
-	netif_carrier_off(ndev);
 
 	ks8695_shutdown(ksp);
 
-- 
cgit v1.2.3


From c1f51212eb809849bdc68a856ae5f424dcf20d9b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 22 Feb 2010 16:56:57 +0000
Subject: drivers/net/chelsio: Use pr_<level>, netif_msg_<type>

Convert CH_<level> and CH_DBG uses to pr_<level> and netif equivalents
Remove CH_<level> and CH_DBG macro definitions

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/chelsio/common.h  | 24 ++----------------------
 drivers/net/chelsio/cxgb2.c   | 18 +++++++++---------
 drivers/net/chelsio/espi.c    |  4 ++--
 drivers/net/chelsio/pm3393.c  | 16 +++++++++-------
 drivers/net/chelsio/sge.c     | 10 +++++-----
 drivers/net/chelsio/subr.c    | 32 +++++++++++++++++---------------
 drivers/net/chelsio/vsc7326.c | 24 ++++++++++++------------
 7 files changed, 56 insertions(+), 72 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 9f89fd600643..2d11afe45310 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -36,6 +36,8 @@
  *                                                                           *
  ****************************************************************************/
 
+#define pr_fmt(fmt) "cxgb: " fmt
+
 #ifndef _CXGB_COMMON_H_
 #define _CXGB_COMMON_H_
 
@@ -55,28 +57,6 @@
 #define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver"
 #define DRV_NAME "cxgb"
 #define DRV_VERSION "2.2"
-#define PFX      DRV_NAME ": "
-
-#define CH_ERR(fmt, ...)   printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
-#define CH_WARN(fmt, ...)  printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
-#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
-
-/*
- * More powerful macro that selectively prints messages based on msg_enable.
- * For info and debugging messages.
- */
-#define CH_MSG(adapter, level, category, fmt, ...) do { \
-	if ((adapter)->msg_enable & NETIF_MSG_##category) \
-		printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \
-		       ## __VA_ARGS__); \
-} while (0)
-
-#ifdef DEBUG
-# define CH_DBG(adapter, category, fmt, ...) \
-	CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__)
-#else
-# define CH_DBG(fmt, ...)
-#endif
 
 #define CH_DEVICE(devid, ssid, idx) \
 	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index a54a32b16498..0f71304e0542 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -974,7 +974,7 @@ void t1_fatal_err(struct adapter *adapter)
 		t1_sge_stop(adapter->sge);
 		t1_interrupts_disable(adapter);
 	}
-	CH_ALERT("%s: encountered fatal error, operation suspended\n",
+	pr_alert("%s: encountered fatal error, operation suspended\n",
 		 adapter->name);
 }
 
@@ -1018,7 +1018,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 		return err;
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		CH_ERR("%s: cannot find PCI device memory base address\n",
+		pr_err("%s: cannot find PCI device memory base address\n",
 		       pci_name(pdev));
 		err = -ENODEV;
 		goto out_disable_pdev;
@@ -1028,20 +1028,20 @@ static int __devinit init_one(struct pci_dev *pdev,
 		pci_using_dac = 1;
 
 		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
-			CH_ERR("%s: unable to obtain 64-bit DMA for "
+			pr_err("%s: unable to obtain 64-bit DMA for "
 			       "consistent allocations\n", pci_name(pdev));
 			err = -ENODEV;
 			goto out_disable_pdev;
 		}
 
 	} else if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
-		CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev));
+		pr_err("%s: no usable DMA configuration\n", pci_name(pdev));
 		goto out_disable_pdev;
 	}
 
 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
-		CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev));
+		pr_err("%s: cannot obtain PCI resources\n", pci_name(pdev));
 		goto out_disable_pdev;
 	}
 
@@ -1069,7 +1069,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 
 			adapter->regs = ioremap(mmio_start, mmio_len);
 			if (!adapter->regs) {
-				CH_ERR("%s: cannot map device registers\n",
+				pr_err("%s: cannot map device registers\n",
 				       pci_name(pdev));
 				err = -ENOMEM;
 				goto out_free_dev;
@@ -1148,8 +1148,8 @@ static int __devinit init_one(struct pci_dev *pdev,
 	for (i = 0; i < bi->port_number; ++i) {
 		err = register_netdev(adapter->port[i].dev);
 		if (err)
-			CH_WARN("%s: cannot register net device %s, skipping\n",
-				pci_name(pdev), adapter->port[i].dev->name);
+			pr_warning("%s: cannot register net device %s, skipping\n",
+				   pci_name(pdev), adapter->port[i].dev->name);
 		else {
 			/*
 			 * Change the name we use for messages to the name of
@@ -1162,7 +1162,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 		}
 	}
 	if (!adapter->registered_device_map) {
-		CH_ERR("%s: could not register any net devices\n",
+		pr_err("%s: could not register any net devices\n",
 		       pci_name(pdev));
 		goto out_release_adapter_res;
 	}
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
index 1e0749e000b0..639ff1955739 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/chelsio/espi.c
@@ -76,7 +76,7 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
 	} while (busy && --attempts);
 
 	if (busy)
-		CH_ERR("%s: TRICN write timed out\n", adapter->name);
+		pr_err("%s: TRICN write timed out\n", adapter->name);
 
 	return busy;
 }
@@ -86,7 +86,7 @@ static int tricn_init(adapter_t *adapter)
 	int i, sme = 1;
 
 	if (!(readl(adapter->regs + A_ESPI_RX_RESET)  & F_RX_CLK_STATUS)) {
-		CH_ERR("%s: ESPI clock not ready\n", adapter->name);
+		pr_err("%s: ESPI clock not ready\n", adapter->name);
 		return -1;
 	}
 
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
index 33d674f36722..a6eb30a6e2b9 100644
--- a/drivers/net/chelsio/pm3393.c
+++ b/drivers/net/chelsio/pm3393.c
@@ -251,8 +251,9 @@ static int pm3393_interrupt_handler(struct cmac *cmac)
 	/* Read the master interrupt status register. */
 	pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS,
 	       &master_intr_status);
-	CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n",
-	       master_intr_status);
+	if (netif_msg_intr(cmac->adapter))
+		dev_dbg(&cmac->adapter->pdev->dev, "PM3393 intr cause 0x%x\n",
+			master_intr_status);
 
 	/* TBD XXX Lets just clear everything for now */
 	pm3393_interrupt_clear(cmac);
@@ -776,11 +777,12 @@ static int pm3393_mac_reset(adapter_t * adapter)
 		successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock
 				    && is_xaui_mabc_pll_locked);
 
-		CH_DBG(adapter, HW,
-		       "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, "
-		       "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n",
-		       i, is_pl4_reset_finished, val, is_pl4_outof_lock,
-		       is_xaui_mabc_pll_locked);
+		if (netif_msg_hw(adapter))
+			dev_dbg(&adapter->pdev->dev,
+				"PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, "
+				"is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n",
+				i, is_pl4_reset_finished, val,
+				is_pl4_outof_lock, is_xaui_mabc_pll_locked);
 	}
 	return successful_reset ? 0 : 1;
 }
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 8e12505ac3aa..71384114a4ed 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -953,7 +953,7 @@ int t1_sge_intr_error_handler(struct sge *sge)
 		sge->stats.respQ_empty++;
 	if (cause & F_RESPQ_OVERFLOW) {
 		sge->stats.respQ_overflow++;
-		CH_ALERT("%s: SGE response queue overflow\n",
+		pr_alert("%s: SGE response queue overflow\n",
 			 adapter->name);
 	}
 	if (cause & F_FL_EXHAUSTED) {
@@ -962,12 +962,12 @@ int t1_sge_intr_error_handler(struct sge *sge)
 	}
 	if (cause & F_PACKET_TOO_BIG) {
 		sge->stats.pkt_too_big++;
-		CH_ALERT("%s: SGE max packet size exceeded\n",
+		pr_alert("%s: SGE max packet size exceeded\n",
 			 adapter->name);
 	}
 	if (cause & F_PACKET_MISMATCH) {
 		sge->stats.pkt_mismatch++;
-		CH_ALERT("%s: SGE packet mismatch\n", adapter->name);
+		pr_alert("%s: SGE packet mismatch\n", adapter->name);
 	}
 	if (cause & SGE_INT_FATAL)
 		t1_fatal_err(adapter);
@@ -1101,7 +1101,7 @@ static void unexpected_offload(struct adapter *adapter, struct freelQ *fl)
 
 	pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr),
 			    pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
-	CH_ERR("%s: unexpected offload packet, cmd %u\n",
+	pr_err("%s: unexpected offload packet, cmd %u\n",
 	       adapter->name, *skb->data);
 	recycle_fl_buf(fl, fl->cidx);
 }
@@ -1687,7 +1687,7 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
 			netif_stop_queue(dev);
 			set_bit(dev->if_port, &sge->stopped_tx_queues);
 			sge->stats.cmdQ_full[2]++;
-			CH_ERR("%s: Tx ring full while queue awake!\n",
+			pr_err("%s: Tx ring full while queue awake!\n",
 			       adapter->name);
 		}
 		spin_unlock(&q->lock);
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 2402d372c886..53bde15fc94d 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -90,7 +90,7 @@ int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
 	tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
 				   TPI_ATTEMPTS, 3);
 	if (tpi_busy)
-		CH_ALERT("%s: TPI write to 0x%x failed\n",
+		pr_alert("%s: TPI write to 0x%x failed\n",
 			 adapter->name, addr);
 	return tpi_busy;
 }
@@ -118,7 +118,7 @@ int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 	tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
 				   TPI_ATTEMPTS, 3);
 	if (tpi_busy)
-		CH_ALERT("%s: TPI read from 0x%x failed\n",
+		pr_alert("%s: TPI read from 0x%x failed\n",
 			 adapter->name, addr);
 	else
 		*valp = readl(adapter->regs + A_TPI_RD_DATA);
@@ -262,7 +262,7 @@ static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
 			udelay(10);
 	} while (busy && --attempts);
 	if (busy)
-		CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
+		pr_alert("%s: MDIO operation timed out\n", adapter->name);
 	return busy;
 }
 
@@ -581,7 +581,7 @@ int t1_seeprom_read(adapter_t *adapter, u32 addr, __le32 *data)
 	} while (!(val & F_VPD_OP_FLAG) && --i);
 
 	if (!(val & F_VPD_OP_FLAG)) {
-		CH_ERR("%s: reading EEPROM address 0x%x failed\n",
+		pr_err("%s: reading EEPROM address 0x%x failed\n",
 		       adapter->name, addr);
 		return -EIO;
 	}
@@ -734,8 +734,9 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 		break;
 	case CHBT_BOARD_8000:
 	case CHBT_BOARD_CHT110:
-		CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
-		       cause);
+		if (netif_msg_intr(adapter))
+			dev_dbg(&adapter->pdev->dev,
+				"External interrupt cause 0x%x\n", cause);
 		if (cause & ELMER0_GP_BIT1) {        /* PMC3393 INTB */
 			struct cmac *mac = adapter->port[0].mac;
 
@@ -746,8 +747,9 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 
 			t1_tpi_read(adapter,
 					A_ELMER0_GPI_STAT, &mod_detect);
-			CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
-			       mod_detect ? "removed" : "inserted");
+			if (netif_msg_link(adapter))
+				dev_info(&adapter->pdev->dev, "XPAK %s\n",
+					 mod_detect ? "removed" : "inserted");
 		}
 		break;
 #ifdef CONFIG_CHELSIO_T1_COUGAR
@@ -1084,7 +1086,7 @@ static void __devinit init_link_config(struct link_config *lc,
 
 #ifdef CONFIG_CHELSIO_T1_COUGAR
 	if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) {
-		CH_ERR("%s: CSPI initialization failed\n",
+		pr_err("%s: CSPI initialization failed\n",
 		       adapter->name);
 		goto error;
 	}
@@ -1105,20 +1107,20 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 
 	adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
 	if (!adapter->sge) {
-		CH_ERR("%s: SGE initialization failed\n",
+		pr_err("%s: SGE initialization failed\n",
 		       adapter->name);
 		goto error;
 	}
 
 	if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
-		CH_ERR("%s: ESPI initialization failed\n",
+		pr_err("%s: ESPI initialization failed\n",
 		       adapter->name);
 		goto error;
 	}
 
 	adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
 	if (!adapter->tp) {
-		CH_ERR("%s: TP initialization failed\n",
+		pr_err("%s: TP initialization failed\n",
 		       adapter->name);
 		goto error;
 	}
@@ -1138,14 +1140,14 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 		adapter->port[i].phy = bi->gphy->create(adapter->port[i].dev,
 							phy_addr, bi->mdio_ops);
 		if (!adapter->port[i].phy) {
-			CH_ERR("%s: PHY %d initialization failed\n",
+			pr_err("%s: PHY %d initialization failed\n",
 			       adapter->name, i);
 			goto error;
 		}
 
 		adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
 		if (!mac) {
-			CH_ERR("%s: MAC %d initialization failed\n",
+			pr_err("%s: MAC %d initialization failed\n",
 			       adapter->name, i);
 			goto error;
 		}
@@ -1157,7 +1159,7 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 		if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
 			mac->ops->macaddress_get(mac, hw_addr);
 		else if (vpd_macaddress_get(adapter, i, hw_addr)) {
-			CH_ERR("%s: could not read MAC address from VPD ROM\n",
+			pr_err("%s: could not read MAC address from VPD ROM\n",
 			       adapter->port[i].dev->name);
 			goto error;
 		}
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c
index 99b51f61fe77..c844111cffeb 100644
--- a/drivers/net/chelsio/vsc7326.c
+++ b/drivers/net/chelsio/vsc7326.c
@@ -48,14 +48,14 @@ static void vsc_read(adapter_t *adapter, u32 addr, u32 *val)
 		i++;
 	} while (((status & 1) == 0) && (i < 50));
 	if (i == 50)
-		CH_ERR("Invalid tpi read from MAC, breaking loop.\n");
+		pr_err("Invalid tpi read from MAC, breaking loop.\n");
 
 	t1_tpi_read(adapter, (REG_LOCAL_DATA << 2) + 4, &vlo);
 	t1_tpi_read(adapter, REG_LOCAL_DATA << 2, &vhi);
 
 	*val = (vhi << 16) | vlo;
 
-	/* CH_ERR("rd: block: 0x%x  sublock: 0x%x  reg: 0x%x  data: 0x%x\n",
+	/* pr_err("rd: block: 0x%x  sublock: 0x%x  reg: 0x%x  data: 0x%x\n",
 		((addr&0xe000)>>13), ((addr&0x1e00)>>9),
 		((addr&0x01fe)>>1), *val); */
 	spin_unlock_bh(&adapter->mac_lock);
@@ -66,7 +66,7 @@ static void vsc_write(adapter_t *adapter, u32 addr, u32 data)
 	spin_lock_bh(&adapter->mac_lock);
 	t1_tpi_write(adapter, (addr << 2) + 4, data & 0xFFFF);
 	t1_tpi_write(adapter, addr << 2, (data >> 16) & 0xFFFF);
-	/* CH_ERR("wr: block: 0x%x  sublock: 0x%x  reg: 0x%x  data: 0x%x\n",
+	/* pr_err("wr: block: 0x%x  sublock: 0x%x  reg: 0x%x  data: 0x%x\n",
 		((addr&0xe000)>>13), ((addr&0x1e00)>>9),
 		((addr&0x01fe)>>1), data); */
 	spin_unlock_bh(&adapter->mac_lock);
@@ -225,7 +225,7 @@ static void run_table(adapter_t *adapter, struct init_table *ib, int len)
 	for (i = 0; i < len; i++) {
 		if (ib[i].addr == INITBLOCK_SLEEP) {
 			udelay( ib[i].data );
-			CH_ERR("sleep %d us\n",ib[i].data);
+			pr_err("sleep %d us\n",ib[i].data);
 		} else
 			vsc_write( adapter, ib[i].addr, ib[i].data );
 	}
@@ -241,7 +241,7 @@ static int bist_rd(adapter_t *adapter, int moduleid, int address)
 	    (address != 0x2) &&
 	    (address != 0xd) &&
 	    (address != 0xe))
-			CH_ERR("No bist address: 0x%x\n", address);
+			pr_err("No bist address: 0x%x\n", address);
 
 	data = ((0x00 << 24) | ((address & 0xff) << 16) | (0x00 << 8) |
 		((moduleid & 0xff) << 0));
@@ -251,9 +251,9 @@ static int bist_rd(adapter_t *adapter, int moduleid, int address)
 
 	vsc_read(adapter, REG_RAM_BIST_RESULT, &result);
 	if ((result & (1 << 9)) != 0x0)
-		CH_ERR("Still in bist read: 0x%x\n", result);
+		pr_err("Still in bist read: 0x%x\n", result);
 	else if ((result & (1 << 8)) != 0x0)
-		CH_ERR("bist read error: 0x%x\n", result);
+		pr_err("bist read error: 0x%x\n", result);
 
 	return (result & 0xff);
 }
@@ -268,10 +268,10 @@ static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
 	    (address != 0x2) &&
 	    (address != 0xd) &&
 	    (address != 0xe))
-			CH_ERR("No bist address: 0x%x\n", address);
+			pr_err("No bist address: 0x%x\n", address);
 
 	if (value > 255)
-		CH_ERR("Suspicious write out of range value: 0x%x\n", value);
+		pr_err("Suspicious write out of range value: 0x%x\n", value);
 
 	data = ((0x01 << 24) | ((address & 0xff) << 16) | (value << 8) |
 		((moduleid & 0xff) << 0));
@@ -281,9 +281,9 @@ static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
 
 	vsc_read(adapter, REG_RAM_BIST_CMD, &result);
 	if ((result & (1 << 27)) != 0x0)
-		CH_ERR("Still in bist write: 0x%x\n", result);
+		pr_err("Still in bist write: 0x%x\n", result);
 	else if ((result & (1 << 26)) != 0x0)
-		CH_ERR("bist write error: 0x%x\n", result);
+		pr_err("bist write error: 0x%x\n", result);
 
 	return 0;
 }
@@ -306,7 +306,7 @@ static int check_bist(adapter_t *adapter, int moduleid)
 	column = ((bist_rd(adapter,moduleid, 0x0e)<<8) +
 			(bist_rd(adapter,moduleid, 0x0d)));
 	if ((result & 3) != 0x3)
-		CH_ERR("Result: 0x%x  BIST error in ram %d, column: 0x%04x\n",
+		pr_err("Result: 0x%x  BIST error in ram %d, column: 0x%04x\n",
 			result, moduleid, column);
 	return 0;
 }
-- 
cgit v1.2.3


From 78ca90ea995cb86c72cde9308276d2a701bd3c40 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 22 Feb 2010 16:56:58 +0000
Subject: drivers/net/myri10ge: Use pr_<level> and netdev_<level>

Add #define pr_fmt(fmt)
Convert logging messages to pr_<level> and netdev_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/myri10ge/myri10ge.c | 183 +++++++++++++++-------------------------
 1 file changed, 67 insertions(+), 116 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c0884a9cba3c..1d14a8b05fa0 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -38,6 +38,8 @@
  *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  *************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/tcp.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
@@ -819,9 +821,7 @@ static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 	status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 
 	if (status) {
-		printk(KERN_ERR
-		       "myri10ge: %s: Failed to set flow control mode\n",
-		       mgp->dev->name);
+		netdev_err(mgp->dev, "Failed to set flow control mode\n");
 		return status;
 	}
 	mgp->pause = pause;
@@ -837,8 +837,7 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 	ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 	status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 	if (status)
-		printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
-		       mgp->dev->name);
+		netdev_err(mgp->dev, "Failed to set promisc mode\n");
 }
 
 static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
@@ -1482,19 +1481,15 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
 
 			if (mgp->link_state == MXGEFW_LINK_UP) {
 				if (netif_msg_link(mgp))
-					printk(KERN_INFO
-					       "myri10ge: %s: link up\n",
-					       mgp->dev->name);
+					netdev_info(mgp->dev, "link up\n");
 				netif_carrier_on(mgp->dev);
 				mgp->link_changes++;
 			} else {
 				if (netif_msg_link(mgp))
-					printk(KERN_INFO
-					       "myri10ge: %s: link %s\n",
-					       mgp->dev->name,
-					       (link_up == MXGEFW_LINK_MYRINET ?
-						"mismatch (Myrinet detected)" :
-						"down"));
+					netdev_info(mgp->dev, "link %s\n",
+					    link_up == MXGEFW_LINK_MYRINET ?
+					    "mismatch (Myrinet detected)" :
+					    "down");
 				netif_carrier_off(mgp->dev);
 				mgp->link_changes++;
 			}
@@ -1503,9 +1498,8 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
 		    ntohl(stats->rdma_tags_available)) {
 			mgp->rdma_tags_available =
 			    ntohl(stats->rdma_tags_available);
-			printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
-			       "%d tags left\n", mgp->dev->name,
-			       mgp->rdma_tags_available);
+			netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
+				    mgp->rdma_tags_available);
 		}
 		mgp->down_cnt += stats->link_down;
 		if (stats->link_down)
@@ -1576,8 +1570,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
 		if (send_done_count != tx->pkt_done)
 			myri10ge_tx_done(ss, (int)send_done_count);
 		if (unlikely(i > myri10ge_max_irq_loops)) {
-			printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
-			       mgp->dev->name);
+			netdev_err(mgp->dev, "irq stuck?\n");
 			stats->valid = 0;
 			schedule_work(&mgp->watchdog_work);
 		}
@@ -1614,16 +1607,14 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
 	 */
 	ptr = mgp->product_code_string;
 	if (ptr == NULL) {
-		printk(KERN_ERR "myri10ge: %s: Missing product code\n",
-		       netdev->name);
+		netdev_err(netdev, "Missing product code\n");
 		return 0;
 	}
 	for (i = 0; i < 3; i++, ptr++) {
 		ptr = strchr(ptr, '-');
 		if (ptr == NULL) {
-			printk(KERN_ERR "myri10ge: %s: Invalid product "
-			       "code %s\n", netdev->name,
-			       mgp->product_code_string);
+			netdev_err(netdev, "Invalid product code %s\n",
+				   mgp->product_code_string);
 			return 0;
 		}
 	}
@@ -2009,17 +2000,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
 				mgp->small_bytes + MXGEFW_PAD, 0);
 
 	if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
-		printk(KERN_ERR
-		       "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
-		       dev->name, slice, ss->rx_small.fill_cnt);
+		netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
+			   slice, ss->rx_small.fill_cnt);
 		goto abort_with_rx_small_ring;
 	}
 
 	myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
 	if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
-		printk(KERN_ERR
-		       "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
-		       dev->name, slice, ss->rx_big.fill_cnt);
+		netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
+			   slice, ss->rx_big.fill_cnt);
 		goto abort_with_rx_big_ring;
 	}
 
@@ -2358,7 +2347,7 @@ static int myri10ge_open(struct net_device *dev)
 	mgp->running = MYRI10GE_ETH_STARTING;
 	status = myri10ge_reset(mgp);
 	if (status != 0) {
-		printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
+		netdev_err(dev, "failed reset\n");
 		goto abort_with_nothing;
 	}
 
@@ -2370,9 +2359,7 @@ static int myri10ge_open(struct net_device *dev)
 		status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
 					   &cmd, 0);
 		if (status != 0) {
-			printk(KERN_ERR
-			       "myri10ge: %s: failed to set number of slices\n",
-			       dev->name);
+			netdev_err(dev, "failed to set number of slices\n");
 			goto abort_with_nothing;
 		}
 		/* setup the indirection table */
@@ -2384,9 +2371,7 @@ static int myri10ge_open(struct net_device *dev)
 					    MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
 					    &cmd, 0);
 		if (status != 0) {
-			printk(KERN_ERR
-			       "myri10ge: %s: failed to setup rss tables\n",
-			       dev->name);
+			netdev_err(dev, "failed to setup rss tables\n");
 			goto abort_with_nothing;
 		}
 
@@ -2400,9 +2385,7 @@ static int myri10ge_open(struct net_device *dev)
 		status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
 					   &cmd, 0);
 		if (status != 0) {
-			printk(KERN_ERR
-			       "myri10ge: %s: failed to enable slices\n",
-			       dev->name);
+			netdev_err(dev, "failed to enable slices\n");
 			goto abort_with_nothing;
 		}
 	}
@@ -2450,9 +2433,7 @@ static int myri10ge_open(struct net_device *dev)
 
 		status = myri10ge_get_txrx(mgp, slice);
 		if (status != 0) {
-			printk(KERN_ERR
-			       "myri10ge: %s: failed to get ring sizes or locations\n",
-			       dev->name);
+			netdev_err(dev, "failed to get ring sizes or locations\n");
 			goto abort_with_rings;
 		}
 		status = myri10ge_allocate_rings(ss);
@@ -2465,9 +2446,7 @@ static int myri10ge_open(struct net_device *dev)
 		if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
 			status = myri10ge_set_stats(mgp, slice);
 		if (status) {
-			printk(KERN_ERR
-			       "myri10ge: %s: Couldn't set stats DMA\n",
-			       dev->name);
+			netdev_err(dev, "Couldn't set stats DMA\n");
 			goto abort_with_rings;
 		}
 
@@ -2498,8 +2477,7 @@ static int myri10ge_open(struct net_device *dev)
 	status |=
 	    myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
 	if (status) {
-		printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
-		       dev->name);
+		netdev_err(dev, "Couldn't set buffer sizes\n");
 		goto abort_with_rings;
 	}
 
@@ -2511,8 +2489,7 @@ static int myri10ge_open(struct net_device *dev)
 	cmd.data0 = 0;
 	status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
 	if (status && status != -ENOSYS) {
-		printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
-		       dev->name);
+		netdev_err(dev, "Couldn't set TSO mode\n");
 		goto abort_with_rings;
 	}
 
@@ -2521,8 +2498,7 @@ static int myri10ge_open(struct net_device *dev)
 
 	status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
 	if (status) {
-		printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
-		       dev->name);
+		netdev_err(dev, "Couldn't bring up link\n");
 		goto abort_with_rings;
 	}
 
@@ -2575,15 +2551,12 @@ static int myri10ge_close(struct net_device *dev)
 		status =
 		    myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
 		if (status)
-			printk(KERN_ERR
-			       "myri10ge: %s: Couldn't bring down link\n",
-			       dev->name);
+			netdev_err(dev, "Couldn't bring down link\n");
 
 		wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
 				   HZ);
 		if (old_down_cnt == mgp->down_cnt)
-			printk(KERN_ERR "myri10ge: %s never got down irq\n",
-			       dev->name);
+			netdev_err(dev, "never got down irq\n");
 	}
 	netif_tx_disable(dev);
 	myri10ge_free_irq(mgp);
@@ -2944,9 +2917,7 @@ abort_linearize:
 		idx = (idx + 1) & tx->mask;
 	} while (idx != last_idx);
 	if (skb_is_gso(skb)) {
-		printk(KERN_ERR
-		       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
-		       mgp->dev->name);
+		netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
 		goto drop;
 	}
 
@@ -3043,8 +3014,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 
 	err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
 	if (err != 0) {
-		printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
-		       " error status: %d\n", dev->name, err);
+		netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
+			   err);
 		goto abort;
 	}
 
@@ -3058,9 +3029,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 	err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
 				&cmd, 1);
 	if (err != 0) {
-		printk(KERN_ERR
-		       "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
-		       ", error status: %d\n", dev->name, err);
+		netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
+			   err);
 		goto abort;
 	}
 
@@ -3073,18 +3043,16 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 					&cmd, 1);
 
 		if (err != 0) {
-			printk(KERN_ERR "myri10ge: %s: Failed "
-			       "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
-			       "%d\t", dev->name, err);
-			printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
+			netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
+				   err, mc_list->dmi_addr);
 			goto abort;
 		}
 	}
 	/* Enable multicast filtering */
 	err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
 	if (err != 0) {
-		printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
-		       "error status: %d\n", dev->name, err);
+		netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
+			   err);
 		goto abort;
 	}
 
@@ -3105,9 +3073,8 @@ static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
 
 	status = myri10ge_update_mac_address(mgp, sa->sa_data);
 	if (status != 0) {
-		printk(KERN_ERR
-		       "myri10ge: %s: changing mac address failed with %d\n",
-		       dev->name, status);
+		netdev_err(dev, "changing mac address failed with %d\n",
+			   status);
 		return status;
 	}
 
@@ -3122,12 +3089,10 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
 	int error = 0;
 
 	if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
-		printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
-		       dev->name, new_mtu);
+		netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
 		return -EINVAL;
 	}
-	printk(KERN_INFO "%s: changing mtu from %d to %d\n",
-	       dev->name, dev->mtu, new_mtu);
+	netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
 	if (mgp->running) {
 		/* if we change the mtu on an active device, we must
 		 * reset the device so the firmware sees the change */
@@ -3356,7 +3321,7 @@ static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	netif_device_detach(netdev);
 	if (netif_running(netdev)) {
-		printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
+		netdev_info(netdev, "closing\n");
 		rtnl_lock();
 		myri10ge_close(netdev);
 		rtnl_unlock();
@@ -3383,8 +3348,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
 	msleep(5);		/* give card time to respond */
 	pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
 	if (vendor == 0xffff) {
-		printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
-		       mgp->dev->name);
+		netdev_err(mgp->dev, "device disappeared!\n");
 		return -EIO;
 	}
 
@@ -3463,10 +3427,9 @@ static void myri10ge_watchdog(struct work_struct *work)
 		 * if the card rebooted due to a parity error
 		 * For now, just report it */
 		reboot = myri10ge_read_reboot(mgp);
-		printk(KERN_ERR
-		       "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
-		       mgp->dev->name, reboot,
-		       myri10ge_reset_recover ? " " : " not");
+		netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
+			   reboot,
+			   myri10ge_reset_recover ? "" : " not");
 		if (myri10ge_reset_recover == 0)
 			return;
 		rtnl_lock();
@@ -3494,31 +3457,26 @@ static void myri10ge_watchdog(struct work_struct *work)
 		if (cmd == 0xffff) {
 			pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
 			if (vendor == 0xffff) {
-				printk(KERN_ERR
-				       "myri10ge: %s: device disappeared!\n",
-				       mgp->dev->name);
+				netdev_err(mgp->dev, "device disappeared!\n");
 				return;
 			}
 		}
 		/* Perhaps it is a software error.  Try to reset */
 
-		printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
-		       mgp->dev->name);
+		netdev_err(mgp->dev, "device timeout, resetting\n");
 		for (i = 0; i < mgp->num_slices; i++) {
 			tx = &mgp->ss[i].tx;
-			printk(KERN_INFO
-			       "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
-			       mgp->dev->name, i, tx->queue_active, tx->req,
-			       tx->done, tx->pkt_start, tx->pkt_done,
-			       (int)ntohl(mgp->ss[i].fw_stats->
-					  send_done_count));
+			netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n",
+				   i, tx->queue_active, tx->req,
+				   tx->done, tx->pkt_start, tx->pkt_done,
+				   (int)ntohl(mgp->ss[i].fw_stats->
+					      send_done_count));
 			msleep(2000);
-			printk(KERN_INFO
-			       "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
-			       mgp->dev->name, i, tx->queue_active, tx->req,
-			       tx->done, tx->pkt_start, tx->pkt_done,
-			       (int)ntohl(mgp->ss[i].fw_stats->
-					  send_done_count));
+			netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n",
+				    i, tx->queue_active, tx->req,
+				    tx->done, tx->pkt_start, tx->pkt_done,
+				    (int)ntohl(mgp->ss[i].fw_stats->
+					       send_done_count));
 		}
 	}
 
@@ -3528,8 +3486,7 @@ static void myri10ge_watchdog(struct work_struct *work)
 	}
 	status = myri10ge_load_firmware(mgp, 1);
 	if (status != 0)
-		printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
-		       mgp->dev->name);
+		netdev_err(mgp->dev, "failed to load firmware\n");
 	else
 		myri10ge_open(mgp->dev);
 	rtnl_unlock();
@@ -3580,14 +3537,10 @@ static void myri10ge_watchdog_timer(unsigned long arg)
 			/* nic seems like it might be stuck.. */
 			if (rx_pause_cnt != mgp->watchdog_pause) {
 				if (net_ratelimit())
-					printk(KERN_WARNING
-					       "myri10ge %s slice %d:"
-					       "TX paused, check link partner\n",
-					       mgp->dev->name, i);
+					netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n",
+						   i);
 			} else {
-				printk(KERN_WARNING
-				       "myri10ge %s slice %d stuck:",
-				       mgp->dev->name, i);
+				netdev_warn(mgp->dev, "slice %d stuck:", i);
 				reset_needed = 1;
 			}
 		}
@@ -4127,13 +4080,11 @@ static struct notifier_block myri10ge_dca_notifier = {
 
 static __init int myri10ge_init_module(void)
 {
-	printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
-	       MYRI10GE_VERSION_STR);
+	pr_info("Version %s\n", MYRI10GE_VERSION_STR);
 
 	if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
-		printk(KERN_ERR
-		       "%s: Illegal rssh hash type %d, defaulting to source port\n",
-		       myri10ge_driver.name, myri10ge_rss_hash);
+		pr_err("Illegal rssh hash type %d, defaulting to source port\n",
+		       myri10ge_rss_hash);
 		myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
 	}
 #ifdef CONFIG_MYRI10GE_DCA
-- 
cgit v1.2.3


From 52c793f24054f5dc30d228e37e0e19cc8313f086 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Mon, 22 Feb 2010 22:21:17 +0000
Subject: can: netlink support for bus-error reporting and counters

This patch makes the bus-error reporting configurable and allows to
retrieve the CAN TX and RX bus error counters via netlink interface.
I have added support for the SJA1000. The TX and RX bus error counters
are also copied to the data fields 6..7 of error messages when state
changes are reported.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/dev.c             |  6 ++++++
 drivers/net/can/sja1000/sja1000.c | 25 ++++++++++++++++++++++---
 include/linux/can/dev.h           |  2 ++
 include/linux/can/netlink.h       | 18 ++++++++++++++----
 4 files changed, 44 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index f08f1202ff00..904aa369f80e 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -574,6 +574,7 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
 	[IFLA_CAN_BITTIMING_CONST]
 				= { .len = sizeof(struct can_bittiming_const) },
 	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
+	[IFLA_CAN_BERR_COUNTER]	= { .len = sizeof(struct can_berr_counter) },
 };
 
 static int can_changelink(struct net_device *dev,
@@ -649,6 +650,8 @@ static size_t can_get_size(const struct net_device *dev)
 	size += nla_total_size(sizeof(u32));  /* IFLA_CAN_RESTART_MS */
 	size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */
 	size += sizeof(struct can_clock);     /* IFLA_CAN_CLOCK */
+	if (priv->do_get_berr_counter)        /* IFLA_CAN_BERR_COUNTER */
+		size += sizeof(struct can_berr_counter);
 	if (priv->bittiming_const)	      /* IFLA_CAN_BITTIMING_CONST */
 		size += sizeof(struct can_bittiming_const);
 
@@ -659,6 +662,7 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
 	struct can_ctrlmode cm = {.flags = priv->ctrlmode};
+	struct can_berr_counter bec;
 	enum can_state state = priv->state;
 
 	if (priv->do_get_state)
@@ -669,6 +673,8 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 	NLA_PUT(skb, IFLA_CAN_BITTIMING,
 		sizeof(priv->bittiming), &priv->bittiming);
 	NLA_PUT(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock);
+	if (priv->do_get_berr_counter && !priv->do_get_berr_counter(dev, &bec))
+		NLA_PUT(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec);
 	if (priv->bittiming_const)
 		NLA_PUT(skb, IFLA_CAN_BITTIMING_CONST,
 			sizeof(*priv->bittiming_const), priv->bittiming_const);
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index ace103a44833..145b1a731a53 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -130,8 +130,12 @@ static void set_normal_mode(struct net_device *dev)
 		/* check reset bit */
 		if ((status & MOD_RM) == 0) {
 			priv->can.state = CAN_STATE_ERROR_ACTIVE;
-			/* enable all interrupts */
-			priv->write_reg(priv, REG_IER, IRQ_ALL);
+			/* enable interrupts */
+			if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
+				priv->write_reg(priv, REG_IER, IRQ_ALL);
+			else
+				priv->write_reg(priv, REG_IER,
+						IRQ_ALL & ~IRQ_BEI);
 			return;
 		}
 
@@ -203,6 +207,17 @@ static int sja1000_set_bittiming(struct net_device *dev)
 	return 0;
 }
 
+static int sja1000_get_berr_counter(const struct net_device *dev,
+				    struct can_berr_counter *bec)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	bec->txerr = priv->read_reg(priv, REG_TXERR);
+	bec->rxerr = priv->read_reg(priv, REG_RXERR);
+
+	return 0;
+}
+
 /*
  * initialize SJA1000 chip:
  *   - reset chip
@@ -437,6 +452,8 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 				CAN_ERR_CRTL_TX_PASSIVE :
 				CAN_ERR_CRTL_RX_PASSIVE;
 		}
+		cf->data[6] = txerr;
+		cf->data[7] = rxerr;
 	}
 
 	priv->can.state = state;
@@ -567,7 +584,9 @@ struct net_device *alloc_sja1000dev(int sizeof_priv)
 	priv->can.bittiming_const = &sja1000_bittiming_const;
 	priv->can.do_set_bittiming = sja1000_set_bittiming;
 	priv->can.do_set_mode = sja1000_set_mode;
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
+	priv->can.do_get_berr_counter = sja1000_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
+		CAN_CTRLMODE_BERR_REPORTING;
 
 	if (sizeof_priv)
 		priv->priv = (void *)priv + sizeof(struct sja1000_priv);
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index c8c660a79f90..6e5a7f00223d 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -47,6 +47,8 @@ struct can_priv {
 	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
 	int (*do_get_state)(const struct net_device *dev,
 			    enum can_state *state);
+	int (*do_get_berr_counter)(const struct net_device *dev,
+				   struct can_berr_counter *bec);
 
 	unsigned int echo_skb_max;
 	struct sk_buff **echo_skb;
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
index c818335fbb13..3250de935e1a 100644
--- a/include/linux/can/netlink.h
+++ b/include/linux/can/netlink.h
@@ -69,6 +69,14 @@ enum can_state {
 	CAN_STATE_MAX
 };
 
+/*
+ * CAN bus error counters
+ */
+struct can_berr_counter {
+	__u16 txerr;
+	__u16 rxerr;
+};
+
 /*
  * CAN controller mode
  */
@@ -77,10 +85,11 @@ struct can_ctrlmode {
 	__u32 flags;
 };
 
-#define CAN_CTRLMODE_LOOPBACK	0x1	/* Loopback mode */
-#define CAN_CTRLMODE_LISTENONLY	0x2 	/* Listen-only mode */
-#define CAN_CTRLMODE_3_SAMPLES	0x4	/* Triple sampling mode */
-#define CAN_CTRLMODE_ONE_SHOT	0x8	/* One-Shot mode */
+#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY		0x02 	/* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
+#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
+#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
 
 /*
  * CAN device statistics
@@ -106,6 +115,7 @@ enum {
 	IFLA_CAN_CTRLMODE,
 	IFLA_CAN_RESTART_MS,
 	IFLA_CAN_RESTART,
+	IFLA_CAN_BERR_COUNTER,
 	__IFLA_CAN_MAX
 };
 
-- 
cgit v1.2.3


From f9dcbcc9e338d08c0f7de7eba4eaafbbb7f81249 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Tue, 23 Feb 2010 09:19:49 +0000
Subject: net: convert multiple drivers to use netdev_for_each_mc_addr, part5
 V2

removed some needless checks and also corrected bug in lp486e (dmi was passed
instead of dmi->dmi_addr)

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/jme.c                  |  6 +-----
 drivers/net/korina.c               |  6 ++----
 drivers/net/ks8851.c               |  5 ++---
 drivers/net/ks8851_mll.c           |  3 ++-
 drivers/net/ksz884x.c              |  4 ++--
 drivers/net/lib82596.c             |  7 ++++---
 drivers/net/lib8390.c              | 15 ++++-----------
 drivers/net/ll_temac_main.c        |  7 ++++---
 drivers/net/lp486e.c               |  4 ++--
 drivers/net/mac89x0.c              |  4 +---
 drivers/net/macb.c                 |  7 ++-----
 drivers/net/mace.c                 | 11 +++++------
 drivers/net/macmace.c              | 12 ++++++------
 drivers/net/mv643xx_eth.c          |  2 +-
 drivers/net/myri10ge/myri10ge.c    |  2 +-
 drivers/net/natsemi.c              |  4 ++--
 drivers/net/netxen/netxen_nic_hw.c | 19 +++++++------------
 drivers/net/ni5010.c               |  3 ++-
 drivers/net/ni52.c                 |  8 ++++----
 drivers/net/niu.c                  |  2 +-
 drivers/net/pci-skeleton.c         |  6 +++---
 drivers/net/pcnet32.c              |  5 ++---
 drivers/net/ps3_gelic_net.c        |  2 +-
 drivers/net/qlcnic/qlcnic_hw.c     |  3 +--
 drivers/net/qlge/qlge_main.c       |  6 ++++--
 drivers/net/r6040.c                | 30 +++++++++++++++---------------
 drivers/net/r8169.c                |  4 +---
 27 files changed, 82 insertions(+), 105 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 558b6a0b15fc..0f31497833df 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -1997,7 +1997,6 @@ jme_set_multi(struct net_device *netdev)
 {
 	struct jme_adapter *jme = netdev_priv(netdev);
 	u32 mc_hash[2] = {};
-	int i;
 
 	spin_lock_bh(&jme->rxmcs_lock);
 
@@ -2012,10 +2011,7 @@ jme_set_multi(struct net_device *netdev)
 		int bit_nr;
 
 		jme->reg_rxmcs |= RXMCS_MULFRAME | RXMCS_MULFILTERED;
-		for (i = 0, mclist = netdev->mc_list;
-			mclist && i < netdev_mc_count(netdev);
-			++i, mclist = mclist->next) {
-
+		netdev_for_each_mc_addr(mclist, netdev) {
 			bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3F;
 			mc_hash[bit_nr >> 5] |= 1 << (bit_nr & 0x1F);
 		}
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index af0c764130e6..300c2249812d 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -482,7 +482,7 @@ static void korina_multicast_list(struct net_device *dev)
 {
 	struct korina_private *lp = netdev_priv(dev);
 	unsigned long flags;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	u32 recognise = ETH_ARC_AB;	/* always accept broadcasts */
 	int i;
 
@@ -502,11 +502,9 @@ static void korina_multicast_list(struct net_device *dev)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < netdev_mc_count(dev); i++) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			char *addrs = dmi->dmi_addr;
 
-			dmi = dmi->next;
-
 			if (!(*addrs & 1))
 				continue;
 
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 9845ab1e5573..b5219cce12ed 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -966,13 +966,12 @@ static void ks8851_set_rx_mode(struct net_device *dev)
 		rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
 				RXCR1_RXPAFMA | RXCR1_RXMAFMA);
 	} else if (dev->flags & IFF_MULTICAST && !netdev_mc_empty(dev)) {
-		struct dev_mc_list *mcptr = dev->mc_list;
+		struct dev_mc_list *mcptr;
 		u32 crc;
-		int i;
 
 		/* accept some multicast */
 
-		for (i = netdev_mc_count(dev); i > 0; i--) {
+		netdev_for_each_mc_addr(mcptr, dev) {
 			crc = ether_crc(ETH_ALEN, mcptr->dmi_addr);
 			crc >>= (32 - 6);  /* get top six bits */
 
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index ffffb3889704..84b0e15831f9 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -1196,7 +1196,8 @@ static void ks_set_rx_mode(struct net_device *netdev)
 	if ((netdev->flags & IFF_MULTICAST) && netdev_mc_count(netdev)) {
 		if (netdev_mc_count(netdev) <= MAX_MCAST_LST) {
 			int i = 0;
-			for (ptr = netdev->mc_list; ptr; ptr = ptr->next) {
+
+			netdev_for_each_mc_addr(ptr, netdev) {
 				if (!(*ptr->dmi_addr & 1))
 					continue;
 				if (i >= MAX_MCAST_LST)
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 6f187c7e61fa..7264a3e5c2c0 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -5777,7 +5777,7 @@ static void netdev_set_rx_mode(struct net_device *dev)
 	if (hw_priv->hw.dev_count > 1)
 		return;
 
-	if ((dev->flags & IFF_MULTICAST) && dev->mc_count) {
+	if ((dev->flags & IFF_MULTICAST) && !netdev_mc_empty(dev)) {
 		int i = 0;
 
 		/* List too big to support so turn on all multicast mode. */
@@ -5790,7 +5790,7 @@ static void netdev_set_rx_mode(struct net_device *dev)
 			return;
 		}
 
-		for (mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+		netdev_for_each_mc_addr(mc_ptr, dev) {
 			if (!(*mc_ptr->dmi_addr & 1))
 				continue;
 			if (i >= MAX_MULTICAST_LIST)
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 371b58b1d151..443c39a3732f 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1396,15 +1396,16 @@ static void set_multicast_list(struct net_device *dev)
 		cmd->cmd.command = SWAP16(CmdMulticastList);
 		cmd->mc_cnt = SWAP16(netdev_mc_count(dev) * 6);
 		cp = cmd->mc_addrs;
-		for (dmi = dev->mc_list;
-		     cnt && dmi != NULL;
-		     dmi = dmi->next, cnt--, cp += 6) {
+		netdev_for_each_mc_addr(dmi, dev) {
+			if (!cnt--)
+				break;
 			memcpy(cp, dmi->dmi_addr, 6);
 			if (i596_debug > 1)
 				DEB(DEB_MULTI,
 				    printk(KERN_DEBUG
 					   "%s: Adding address %pM\n",
 					   dev->name, cp));
+			cp += 6;
 		}
 		DMA_WBACK_INV(dev, &dma->mc_cmd, sizeof(struct mc_cmd));
 		i596_add_cmd(dev, &cmd->cmd);
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index 57f25848fe80..56f66f485400 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -907,15 +907,8 @@ static inline void make_mc_bits(u8 *bits, struct net_device *dev)
 {
 	struct dev_mc_list *dmi;
 
-	for (dmi=dev->mc_list; dmi; dmi=dmi->next)
-	{
-		u32 crc;
-		if (dmi->dmi_addrlen != ETH_ALEN)
-		{
-			printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
-			continue;
-		}
-		crc = ether_crc(ETH_ALEN, dmi->dmi_addr);
+	netdev_for_each_mc_addr(dmi, dev) {
+		u32 crc = ether_crc(ETH_ALEN, dmi->dmi_addr);
 		/*
 		 * The 8390 uses the 6 most significant bits of the
 		 * CRC to index the multicast table.
@@ -941,7 +934,7 @@ static void do_set_multicast_list(struct net_device *dev)
 	if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI)))
 	{
 		memset(ei_local->mcfilter, 0, 8);
-		if (dev->mc_list)
+		if (!netdev_mc_empty(dev))
 			make_mc_bits(ei_local->mcfilter, dev);
 	}
 	else
@@ -975,7 +968,7 @@ static void do_set_multicast_list(struct net_device *dev)
 
   	if(dev->flags&IFF_PROMISC)
   		ei_outb_p(E8390_RXCONFIG | 0x18, e8390_base + EN0_RXCR);
-	else if(dev->flags&IFF_ALLMULTI || dev->mc_list)
+	else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev))
   		ei_outb_p(E8390_RXCONFIG | 0x08, e8390_base + EN0_RXCR);
   	else
   		ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index e53440253748..a18e3485476e 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -250,9 +250,10 @@ static void temac_set_multicast_list(struct net_device *ndev)
 		temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
 		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
 	} else if (!netdev_mc_empty(ndev)) {
-		struct dev_mc_list *mclist = ndev->mc_list;
-		for (i = 0; mclist && i < netdev_mc_count(ndev); i++) {
+		struct dev_mc_list *mclist;
 
+		i = 0;
+		netdev_for_each_mc_addr(mclist, ndev) {
 			if (i >= MULTICAST_CAM_TABLE_NUM)
 				break;
 			multi_addr_msw = ((mclist->dmi_addr[3] << 24) |
@@ -265,7 +266,7 @@ static void temac_set_multicast_list(struct net_device *ndev)
 					  (mclist->dmi_addr[4]) | (i << 16));
 			temac_indirect_out32(lp, XTE_MAW1_OFFSET,
 					     multi_addr_lsw);
-			mclist = mclist->next;
+			i++;
 		}
 	} else {
 		val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index b1f5d79af61f..3e3cc04defd0 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -1267,8 +1267,8 @@ static void set_multicast_list(struct net_device *dev) {
 		cmd->command = CmdMulticastList;
 		*((unsigned short *) (cmd + 1)) = netdev_mc_count(dev) * 6;
 		cp = ((char *)(cmd + 1))+2;
-		for (dmi = dev->mc_list; dmi != NULL; dmi = dmi->next) {
-			memcpy(cp, dmi,6);
+		netdev_for_each_mc_addr(dmi, dev) {
+			memcpy(cp, dmi->dmi_addr, 6);
 			cp += 6;
 		}
 		if (i596_debug & LOG_SRCDST)
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index 23b633e2ac42..c292a608f9a9 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -568,9 +568,7 @@ static void set_multicast_list(struct net_device *dev)
 	if(dev->flags&IFF_PROMISC)
 	{
 		lp->rx_mode = RX_ALL_ACCEPT;
-	}
-	else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
-	{
+	} else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
 		/* The multicast-accept list is initialized to accept-all, and we
 		   rely on higher-level filtering for now. */
 		lp->rx_mode = RX_MULTCAST_ACCEPT;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 7a5f89728a81..c8a18a6203c8 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -884,15 +884,12 @@ static void macb_sethashtable(struct net_device *dev)
 {
 	struct dev_mc_list *curr;
 	unsigned long mc_filter[2];
-	unsigned int i, bitnr;
+	unsigned int bitnr;
 	struct macb *bp = netdev_priv(dev);
 
 	mc_filter[0] = mc_filter[1] = 0;
 
-	curr = dev->mc_list;
-	for (i = 0; i < netdev_mc_count(dev); i++, curr = curr->next) {
-		if (!curr) break;	/* unexpected end of list */
-
+	netdev_for_each_mc_addr(curr, dev) {
 		bitnr = hash_get_index(curr->dmi_addr);
 		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
 	}
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index fdb0bbdd6782..57534f0e906d 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -588,7 +588,7 @@ static void mace_set_multicast(struct net_device *dev)
 {
     struct mace_data *mp = netdev_priv(dev);
     volatile struct mace __iomem *mb = mp->mace;
-    int i, j;
+    int i;
     u32 crc;
     unsigned long flags;
 
@@ -598,7 +598,7 @@ static void mace_set_multicast(struct net_device *dev)
 	mp->maccc |= PROM;
     } else {
 	unsigned char multicast_filter[8];
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 
 	if (dev->flags & IFF_ALLMULTI) {
 	    for (i = 0; i < 8; i++)
@@ -606,11 +606,10 @@ static void mace_set_multicast(struct net_device *dev)
 	} else {
 	    for (i = 0; i < 8; i++)
 		multicast_filter[i] = 0;
-	    for (i = 0; i < netdev_mc_count(dev); i++) {
+	    netdev_for_each_mc_addr(dmi, dev) {
 	        crc = ether_crc_le(6, dmi->dmi_addr);
-		j = crc >> 26;	/* bit number in multicast_filter */
-		multicast_filter[j >> 3] |= 1 << (j & 7);
-		dmi = dmi->next;
+		i = crc >> 26;	/* bit number in multicast_filter */
+		multicast_filter[i >> 3] |= 1 << (i & 7);
 	    }
 	}
 #if 0
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index 740accbf0806..4e4eac0ba176 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -496,7 +496,7 @@ static void mace_set_multicast(struct net_device *dev)
 {
 	struct mace_data *mp = netdev_priv(dev);
 	volatile struct mace *mb = mp->mace;
-	int i, j;
+	int i;
 	u32 crc;
 	u8 maccc;
 	unsigned long flags;
@@ -509,7 +509,7 @@ static void mace_set_multicast(struct net_device *dev)
 		mb->maccc |= PROM;
 	} else {
 		unsigned char multicast_filter[8];
-		struct dev_mc_list *dmi = dev->mc_list;
+		struct dev_mc_list *dmi;
 
 		if (dev->flags & IFF_ALLMULTI) {
 			for (i = 0; i < 8; i++) {
@@ -518,11 +518,11 @@ static void mace_set_multicast(struct net_device *dev)
 		} else {
 			for (i = 0; i < 8; i++)
 				multicast_filter[i] = 0;
-			for (i = 0; i < netdev_mc_count(dev); i++) {
+			netdev_for_each_mc_addr(dmi, dev) {
 				crc = ether_crc_le(6, dmi->dmi_addr);
-				j = crc >> 26;	/* bit number in multicast_filter */
-				multicast_filter[j >> 3] |= 1 << (j & 7);
-				dmi = dmi->next;
+				/* bit number in multicast_filter */
+				i = crc >> 26;
+				multicast_filter[i >> 3] |= 1 << (i & 7);
 			}
 		}
 
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 2733b0a3b703..c97b6e4365a9 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1794,7 +1794,7 @@ oom:
 	memset(mc_spec, 0, 0x100);
 	memset(mc_other, 0, 0x100);
 
-	for (addr = dev->mc_list; addr != NULL; addr = addr->next) {
+	netdev_for_each_mc_addr(addr, dev) {
 		u8 *a = addr->da_addr;
 		u32 *table;
 		int entry;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 1d14a8b05fa0..aae2ddb5d827 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3035,7 +3035,7 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 	}
 
 	/* Walk the multicast list, and add each address */
-	for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
+	netdev_for_each_mc_addr(mc_list, dev) {
 		memcpy(data, &mc_list->dmi_addr, 6);
 		cmd.data0 = ntohl(data[0]);
 		cmd.data1 = ntohl(data[1]);
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index c64e5b0d3596..e52038783245 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2495,9 +2495,9 @@ static void __set_rx_mode(struct net_device *dev)
 	} else {
 		struct dev_mc_list *mclist;
 		int i;
+
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int b = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
 			mc_filter[b/8] |= (1 << (b & 0x07));
 		}
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 25f4414cc33e..a945591298a8 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -539,7 +539,7 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct dev_mc_list *mc_ptr;
 	u8 null_addr[6];
-	int index = 0;
+	int i;
 
 	memset(null_addr, 0, 6);
 
@@ -570,16 +570,13 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 
 	netxen_nic_enable_mcast_filter(adapter);
 
-	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next, index++)
-		netxen_nic_set_mcast_addr(adapter, index, mc_ptr->dmi_addr);
-
-	if (index != netdev_mc_count(netdev))
-		printk(KERN_WARNING "%s: %s multicast address count mismatch\n",
-			netxen_nic_driver_name, netdev->name);
+	i = 0;
+	netdev_for_each_mc_addr(mc_ptr, netdev)
+		netxen_nic_set_mcast_addr(adapter, i++, mc_ptr->dmi_addr);
 
 	/* Clear out remaining addresses */
-	for (; index < adapter->max_mc_count; index++)
-		netxen_nic_set_mcast_addr(adapter, index, null_addr);
+	while (i < adapter->max_mc_count)
+		netxen_nic_set_mcast_addr(adapter, i++, null_addr);
 }
 
 static int
@@ -710,10 +707,8 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	}
 
 	if (!netdev_mc_empty(netdev)) {
-		for (mc_ptr = netdev->mc_list; mc_ptr;
-		     mc_ptr = mc_ptr->next) {
+		netdev_for_each_mc_addr(mc_ptr, netdev)
 			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr, &del_list);
-		}
 	}
 
 send_fw_cmd:
diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
index 6a87d810e59d..c16cbfb4061b 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ni5010.c
@@ -651,7 +651,8 @@ static void ni5010_set_multicast_list(struct net_device *dev)
 
 	PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name));
 
-	if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) {
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+	    !netdev_mc_empty(dev)) {
 		outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */
 		PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name));
 	} else {
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index 497c6d514a68..05c29c2cef2a 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -596,7 +596,7 @@ static int init586(struct net_device *dev)
 	struct iasetup_cmd_struct __iomem *ias_cmd;
 	struct tdr_cmd_struct __iomem *tdr_cmd;
 	struct mcsetup_cmd_struct __iomem *mc_cmd;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	int num_addrs = netdev_mc_count(dev);
 
 	ptr = p->scb + 1;
@@ -724,9 +724,9 @@ static int init586(struct net_device *dev)
 		writew(0xffff, &mc_cmd->cmd_link);
 		writew(num_addrs * 6, &mc_cmd->mc_cnt);
 
-		for (i = 0; i < num_addrs; i++, dmi = dmi->next)
-			memcpy_toio(mc_cmd->mc_list[i],
-							dmi->dmi_addr, 6);
+		i = 0;
+		netdev_for_each_mc_addr(dmi, dev)
+			memcpy_toio(mc_cmd->mc_list[i++], dmi->dmi_addr, 6);
 
 		writew(make16(mc_cmd), &p->scb->cbl_offset);
 		writeb(CUC_START, &p->scb->cmd_cuc);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 5e604e305d95..0678f3106cbc 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6365,7 +6365,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 		for (i = 0; i < 16; i++)
 			hash[i] = 0xffff;
 	} else if (!netdev_mc_empty(dev)) {
-		for (addr = dev->mc_list; addr; addr = addr->next) {
+		netdev_for_each_mc_addr(addr, dev) {
 			u32 crc = ether_crc_le(ETH_ALEN, addr->da_addr);
 
 			crc >>= 24;
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 11d4398eac94..36785853a149 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1793,7 +1793,7 @@ static void netdrv_set_rx_mode(struct net_device *dev)
 	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	u32 mc_filter[2];	/* Multicast hash filter */
-	int i, rx_mode;
+	int rx_mode;
 	u32 tmp;
 
 	DPRINTK("ENTER\n");
@@ -1814,10 +1814,10 @@ static void netdrv_set_rx_mode(struct net_device *dev)
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
 	} else {
 		struct dev_mc_list *mclist;
+
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 63e03159daf7..084d78dd1637 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -2590,7 +2590,7 @@ static void pcnet32_load_multicast(struct net_device *dev)
 	struct pcnet32_private *lp = netdev_priv(dev);
 	volatile struct pcnet32_init_block *ib = lp->init_block;
 	volatile __le16 *mcast_table = (__le16 *)ib->filter;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	unsigned long ioaddr = dev->base_addr;
 	char *addrs;
 	int i;
@@ -2611,9 +2611,8 @@ static void pcnet32_load_multicast(struct net_device *dev)
 	ib->filter[1] = 0;
 
 	/* Add addresses */
-	for (i = 0; i < netdev_mc_count(dev); i++) {
+	netdev_for_each_mc_addr(dmi, dev) {
 		addrs = dmi->dmi_addr;
-		dmi = dmi->next;
 
 		/* multicast address? */
 		if (!(*addrs & 1))
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index c19dd4a6cd76..a849f6f23a17 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -580,7 +580,7 @@ void gelic_net_set_multi(struct net_device *netdev)
 	}
 
 	/* set multicast addresses */
-	for (mc = netdev->mc_list; mc; mc = mc->next) {
+	netdev_for_each_mc_addr(mc, netdev) {
 		addr = 0;
 		p = mc->dmi_addr;
 		for (i = 0; i < ETH_ALEN; i++) {
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 8ea7f869e293..99a4d1379d00 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -453,8 +453,7 @@ void qlcnic_set_multi(struct net_device *netdev)
 	}
 
 	if (!netdev_mc_empty(netdev)) {
-		for (mc_ptr = netdev->mc_list; mc_ptr;
-				     mc_ptr = mc_ptr->next) {
+		netdev_for_each_mc_addr(mc_ptr, netdev) {
 			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
 							&del_list);
 		}
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c170349717c5..c26ec5d740f6 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4270,8 +4270,8 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 		status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
 		if (status)
 			goto exit;
-		for (i = 0, mc_ptr = ndev->mc_list; mc_ptr;
-		     i++, mc_ptr = mc_ptr->next)
+		i = 0;
+		netdev_for_each_mc_addr(mc_ptr, ndev) {
 			if (ql_set_mac_addr_reg(qdev, (u8 *) mc_ptr->dmi_addr,
 						MAC_ADDR_TYPE_MULTI_MAC, i)) {
 				netif_err(qdev, hw, qdev->ndev,
@@ -4279,6 +4279,8 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 				ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 				goto exit;
 			}
+			i++;
+		}
 		ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 		if (ql_set_routing_reg
 		    (qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) {
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index b8103425facb..15d5373dc8f3 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -938,7 +938,7 @@ static void r6040_multicast_list(struct net_device *dev)
 	u16 *adrp;
 	u16 reg;
 	unsigned long flags;
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	int i;
 
 	/* MAC Address */
@@ -973,11 +973,9 @@ static void r6040_multicast_list(struct net_device *dev)
 		for (i = 0; i < 4; i++)
 			hash_table[i] = 0;
 
-		for (i = 0; i < netdev_mc_count(dev); i++) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			char *addrs = dmi->dmi_addr;
 
-			dmi = dmi->next;
-
 			if (!(*addrs & 1))
 				continue;
 
@@ -995,17 +993,19 @@ static void r6040_multicast_list(struct net_device *dev)
 		iowrite16(hash_table[3], ioaddr + MAR3);
 	}
 	/* Multicast Address 1~4 case */
-	for (i = 0, dmi; (i < netdev_mc_count(dev)) && (i < MCAST_MAX); i++) {
-		adrp = (u16 *)dmi->dmi_addr;
-		iowrite16(adrp[0], ioaddr + MID_1L + 8*i);
-		iowrite16(adrp[1], ioaddr + MID_1M + 8*i);
-		iowrite16(adrp[2], ioaddr + MID_1H + 8*i);
-		dmi = dmi->next;
-	}
-	for (i = netdev_mc_count(dev); i < MCAST_MAX; i++) {
-		iowrite16(0xffff, ioaddr + MID_0L + 8*i);
-		iowrite16(0xffff, ioaddr + MID_0M + 8*i);
-		iowrite16(0xffff, ioaddr + MID_0H + 8*i);
+	i = 0;
+	netdev_for_each_mc_addr(dmi, dev) {
+		if (i < MCAST_MAX) {
+			adrp = (u16 *) dmi->dmi_addr;
+			iowrite16(adrp[0], ioaddr + MID_1L + 8 * i);
+			iowrite16(adrp[1], ioaddr + MID_1M + 8 * i);
+			iowrite16(adrp[2], ioaddr + MID_1H + 8 * i);
+		} else {
+			iowrite16(0xffff, ioaddr + MID_0L + 8 * i);
+			iowrite16(0xffff, ioaddr + MID_0M + 8 * i);
+			iowrite16(0xffff, ioaddr + MID_0H + 8 * i);
+		}
+		i++;
 	}
 }
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 83965eeba456..dfc3573c91bb 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4732,12 +4732,10 @@ static void rtl_set_rx_mode(struct net_device *dev)
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
 	} else {
 		struct dev_mc_list *mclist;
-		unsigned int i;
 
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
 			rx_mode |= AcceptMulticast;
-- 
cgit v1.2.3


From 567ec874d15b478c8eda7e9a5d2dcb05f13f1fb5 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Tue, 23 Feb 2010 23:17:07 +0000
Subject: net: convert multiple drivers to use netdev_for_each_mc_addr, part6

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smc911x.c             |  4 +---
 drivers/net/smc9194.c             | 10 +++++-----
 drivers/net/smc91x.c              |  7 +------
 drivers/net/starfire.c            |  3 +--
 drivers/net/tc35815.c             |  8 ++++----
 drivers/net/tehuti.c              |  4 +---
 drivers/net/tg3.c                 |  5 +----
 drivers/net/tlan.c                |  7 ++++---
 drivers/net/tsi108_eth.c          | 20 +++++---------------
 drivers/net/typhoon.c             |  5 +----
 drivers/net/ucc_geth.c            |  7 +------
 drivers/net/via-rhine.c           |  6 ++----
 drivers/net/via-velocity.c        |  6 +++---
 drivers/net/virtio_net.c          |  5 +++--
 drivers/net/vmxnet3/vmxnet3_drv.c | 11 ++++-------
 drivers/net/vxge/vxge-main.c      |  4 +---
 drivers/net/yellowfin.c           |  4 ++--
 drivers/net/znet.c                |  3 ++-
 18 files changed, 42 insertions(+), 77 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index ef9674c6713f..9871a2b61f86 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1341,7 +1341,6 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 	 * within that register.
 	 */
 	else if (!netdev_mc_empty(dev)) {
-		int i;
 		struct dev_mc_list *cur_addr;
 
 		/* Set the Hash perfec mode */
@@ -1350,8 +1349,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
 		/* start with a table of all zeros: reject all */
 		memset(multicast_table, 0, sizeof(multicast_table));
 
-		cur_addr = dev->mc_list;
-		for (i = 0; i < netdev_mc_count(dev); i++, cur_addr = cur_addr->next) {
+		netdev_for_each_mc_addr(cur_addr, dev) {
 			u32 position;
 
 			/* do we have a pointer here? */
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index 41c3dddeab50..f9a960e7fc1f 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -434,18 +434,18 @@ static void smc_shutdown( int ioaddr )
 */
 
 
-static void smc_setmulticast( int ioaddr, int count, struct dev_mc_list * addrs ) {
+static void smc_setmulticast(int ioaddr, struct net_device *dev)
+{
 	int			i;
 	unsigned char		multicast_table[ 8 ];
-	struct dev_mc_list	* cur_addr;
+	struct dev_mc_list *cur_addr;
 	/* table for flipping the order of 3 bits */
 	unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 };
 
 	/* start with a table of all zeros: reject all */
 	memset( multicast_table, 0, sizeof( multicast_table ) );
 
-	cur_addr = addrs;
-	for ( i = 0; i < count ; i ++, cur_addr = cur_addr->next  ) {
+	netdev_for_each_mc_addr(cur_addr, dev) {
 		int position;
 
 		/* do we have a pointer here? */
@@ -1550,7 +1550,7 @@ static void smc_set_multicast_list(struct net_device *dev)
 			ioaddr + RCR );
 		/* NOTE: this has to set the bank, so make sure it is the
 		   last thing called.  The bank is set to zero at the top */
-		smc_setmulticast(ioaddr, netdev_mc_count(dev), dev->mc_list);
+		smc_setmulticast(ioaddr, dev);
 	}
 	else  {
 		outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 66450127c5a1..fc1b5a1a3583 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1413,7 +1413,6 @@ static void smc_set_multicast_list(struct net_device *dev)
 	 * within that register.
 	 */
 	else if (!netdev_mc_empty(dev)) {
-		int i;
 		struct dev_mc_list *cur_addr;
 
 		/* table for flipping the order of 3 bits */
@@ -1422,13 +1421,9 @@ static void smc_set_multicast_list(struct net_device *dev)
 		/* start with a table of all zeros: reject all */
 		memset(multicast_table, 0, sizeof(multicast_table));
 
-		cur_addr = dev->mc_list;
-		for (i = 0; i < netdev_mc_count(dev); i++, cur_addr = cur_addr->next) {
+		netdev_for_each_mc_addr(cur_addr, dev) {
 			int position;
 
-			/* do we have a pointer here? */
-			if (!cur_addr)
-				break;
 			/* make sure this is a multicast address -
 		   	   shouldn't this be a given if we have it here ? */
 			if (!(*cur_addr->dmi_addr & 1))
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 0f405ef51858..6dfa69899019 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1825,8 +1825,7 @@ static void set_rx_mode(struct net_device *dev)
 		__le16 mc_filter[32] __attribute__ ((aligned(sizeof(long))));	/* Multicast hash filter */
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			/* The chip uses the upper 9 CRC bits
 			   as index into the hash table */
 			int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23;
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index a2c635ecdab8..876f45afbed4 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1945,18 +1945,18 @@ tc35815_set_multicast_list(struct net_device *dev)
 		/* Disable promiscuous mode, use normal mode. */
 		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl);
 	} else if (!netdev_mc_empty(dev)) {
-		struct dev_mc_list *cur_addr = dev->mc_list;
+		struct dev_mc_list *cur_addr;
 		int i;
 		int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE);
 
 		tc_writel(0, &tr->CAM_Ctl);
 		/* Walk the address list, and load the filter */
-		for (i = 0; i < netdev_mc_count(dev); i++, cur_addr = cur_addr->next) {
-			if (!cur_addr)
-				break;
+		i = 0;
+		netdev_for_each_mc_addr(cur_addr, dev) {
 			/* entry 0,1 is reserved. */
 			tc35815_set_cam_entry(dev, i + 2, cur_addr->dmi_addr);
 			ena_bits |= CAM_Ena_Bit(i + 2);
+			i++;
 		}
 		tc_writel(ena_bits, &tr->CAM_Ena);
 		tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 2517cc00ac2a..0c9780217c87 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -824,10 +824,8 @@ static void bdx_setmulti(struct net_device *ndev)
 		/* TBD: sort addreses and write them in ascending order
 		 * into RX_MAC_MCST regs. we skip this phase now and accept ALL
 		 * multicast frames throu IMF */
-		mclist = ndev->mc_list;
-
 		/* accept the rest of addresses throu IMF */
-		for (; mclist; mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, ndev) {
 			hash = 0;
 			for (i = 0; i < ETH_ALEN; i++)
 				hash ^= mclist->dmi_addr[i];
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f204f73c4f99..0d06e4007f44 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9458,15 +9458,12 @@ static void __tg3_set_rx_mode(struct net_device *dev)
 	} else {
 		/* Accept one or more multicast(s). */
 		struct dev_mc_list *mclist;
-		unsigned int i;
 		u32 mc_filter[4] = { 0, };
 		u32 regidx;
 		u32 bit;
 		u32 crc;
 
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
-
+		netdev_for_each_mc_addr(mclist, dev) {
 			crc = calc_crc (mclist->dmi_addr, ETH_ALEN);
 			bit = ~crc & 0x7f;
 			regidx = (bit & 0x60) >> 5;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index e44d5a074c69..390540c101c7 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1314,7 +1314,7 @@ static struct net_device_stats *TLan_GetStats( struct net_device *dev )
 
 static void TLan_SetMulticastList( struct net_device *dev )
 {
-	struct dev_mc_list	*dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	u32			hash1 = 0;
 	u32			hash2 = 0;
 	int			i;
@@ -1335,7 +1335,8 @@ static void TLan_SetMulticastList( struct net_device *dev )
 			TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
 			TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
 		} else {
-			for ( i = 0; i < netdev_mc_count(dev); i++ ) {
+			i = 0;
+			netdev_for_each_mc_addr(dmi, dev) {
 				if ( i < 3 ) {
 					TLan_SetMac( dev, i + 1,
 						     (char *) &dmi->dmi_addr );
@@ -1346,7 +1347,7 @@ static void TLan_SetMulticastList( struct net_device *dev )
 					else
 						hash2 |= ( 1 << ( offset - 32 ) );
 				}
-				dmi = dmi->next;
+				i++;
 			}
 			for ( ; i < 3; i++ )
 				TLan_SetMac( dev, i + 1, NULL );
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index f4b30c4826fb..647cdd1d4e20 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1186,27 +1186,17 @@ static void tsi108_set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
 		int i;
-		struct dev_mc_list *mc = dev->mc_list;
+		struct dev_mc_list *mc;
 		rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH;
 
 		memset(data->mc_hash, 0, sizeof(data->mc_hash));
 
-		while (mc) {
+		netdev_for_each_mc_addr(mc, dev) {
 			u32 hash, crc;
 
-			if (mc->dmi_addrlen == 6) {
-				crc = ether_crc(6, mc->dmi_addr);
-				hash = crc >> 23;
-
-				__set_bit(hash, &data->mc_hash[0]);
-			} else {
-				printk(KERN_ERR
-		"%s: got multicast address of length %d instead of 6.\n",
-				       dev->name,
-				       mc->dmi_addrlen);
-			}
-
-			mc = mc->next;
+			crc = ether_crc(6, mc->dmi_addr);
+			hash = crc >> 23;
+			__set_bit(hash, &data->mc_hash[0]);
 		}
 
 		TSI_WRITE(TSI108_EC_HASHADDR,
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 38c216132ef5..e3ddcb8f29df 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -922,12 +922,9 @@ typhoon_set_rx_mode(struct net_device *dev)
 		filter |= TYPHOON_RX_FILTER_ALL_MCAST;
 	} else if (!netdev_mc_empty(dev)) {
 		struct dev_mc_list *mclist;
-		int i;
 
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
 			mc_filter[bit >> 5] |= 1 << (bit & 0x1f);
 		}
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index a05720289c7e..23a97518bc1f 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2002,7 +2002,6 @@ static void ucc_geth_set_multi(struct net_device *dev)
 	struct dev_mc_list *dmi;
 	struct ucc_fast __iomem *uf_regs;
 	struct ucc_geth_82xx_address_filtering_pram __iomem *p_82xx_addr_filt;
-	int i;
 
 	ugeth = netdev_priv(dev);
 
@@ -2029,11 +2028,7 @@ static void ucc_geth_set_multi(struct net_device *dev)
 			out_be32(&p_82xx_addr_filt->gaddr_h, 0x0);
 			out_be32(&p_82xx_addr_filt->gaddr_l, 0x0);
 
-			dmi = dev->mc_list;
-
-			for (i = 0; i < netdev_mc_count(dev);
-			     i++, dmi = dmi->next) {
-
+			netdev_for_each_mc_addr(dmi, dev) {
 				/* Only support group multicast for now.
 				 */
 				if (!(dmi->dmi_addr[0] & 1))
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 85df7ac636b5..50f881aa3939 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1705,11 +1705,9 @@ static void rhine_set_rx_mode(struct net_device *dev)
 		rx_mode = 0x0C;
 	} else {
 		struct dev_mc_list *mclist;
-		int i;
+
 		memset(mc_filter, 0, sizeof(mc_filter));
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
 
 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 4e47f2683b83..3a486f3bad3d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1141,11 +1141,11 @@ static void velocity_set_multi(struct net_device *dev)
 		int offset = MCAM_SIZE - vptr->multicast_limit;
 		mac_get_cam_mask(regs, vptr->mCAMmask);
 
-		for (i = 0, mclist = dev->mc_list;
-		     mclist && i < netdev_mc_count(dev);
-		     i++, mclist = mclist->next) {
+		i = 0;
+		netdev_for_each_mc_addr(mclist, dev) {
 			mac_set_cam(regs, i + offset, mclist->dmi_addr);
 			vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+			i++;
 		}
 
 		mac_set_cam_mask(regs, vptr->mCAMmask);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index ce35b42cc2cb..e6095f3aa05f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -776,8 +776,9 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 
 	mac_data->entries = mc_count;
 	addr = dev->mc_list;
-	for (i = 0; i < mc_count; i++, addr = addr->next)
-		memcpy(&mac_data->macs[i][0], addr->da_addr, ETH_ALEN);
+	i = 0;
+	netdev_for_each_mc_addr(addr, dev)
+		memcpy(&mac_data->macs[i++][0], addr->da_addr, ETH_ALEN);
 
 	sg_set_buf(&sg[1], mac_data,
 		   sizeof(mac_data->entries) + (mc_count * ETH_ALEN));
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index ee1b397417f3..cff3485d9673 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1675,15 +1675,12 @@ vmxnet3_copy_mc(struct net_device *netdev)
 		/* We may be called with BH disabled */
 		buf = kmalloc(sz, GFP_ATOMIC);
 		if (buf) {
-			int i;
-			struct dev_mc_list *mc = netdev->mc_list;
+			struct dev_mc_list *mc;
+			int i = 0;
 
-			for (i = 0; i < netdev_mc_count(netdev); i++) {
-				BUG_ON(!mc);
-				memcpy(buf + i * ETH_ALEN, mc->dmi_addr,
+			netdev_for_each_mc_addr(mc, netdev)
+				memcpy(buf + i++ * ETH_ALEN, mc->dmi_addr,
 				       ETH_ALEN);
-				mc = mc->next;
-			}
 		}
 	}
 	return buf;
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index c248b01218a1..46a7c9e689ec 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -1217,9 +1217,7 @@ static void vxge_set_multicast(struct net_device *dev)
 		}
 
 		/* Add new ones */
-		for (i = 0, mclist = dev->mc_list; i < netdev_mc_count(dev);
-			i++, mclist = mclist->next) {
-
+		netdev_for_each_mc_addr(mclist, dev) {
 			memcpy(mac_info.macaddr, mclist->dmi_addr, ETH_ALEN);
 			for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
 					vpath_idx++) {
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index e4aab4d5b553..7d4107f5eeb0 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -1303,9 +1303,9 @@ static void set_rx_mode(struct net_device *dev)
 		struct dev_mc_list *mclist;
 		u16 hash_table[4];
 		int i;
+
 		memset(hash_table, 0, sizeof(hash_table));
-		for (i = 0, mclist = dev->mc_list; mclist && i < netdev_mc_count(dev);
-			 i++, mclist = mclist->next) {
+		netdev_for_each_mc_addr(mclist, dev) {
 			unsigned int bit;
 
 			/* Due to a bug in the early chip versions, multiple filter
diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index bc5ae0f6e934..def49d2ec69a 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -313,7 +313,8 @@ static void znet_set_multicast_list (struct net_device *dev)
 	/* Byte D */
 	cfblk->dummy_1 = 1; 	/* set to 1 */
 	cfblk->tx_ifs_retrig = 3; /* Hmm... Disabled */
-	cfblk->mc_all = (dev->mc_list || (dev->flags&IFF_ALLMULTI));/* multicast all mode */
+	cfblk->mc_all = (!netdev_mc_empty(dev) ||
+			(dev->flags & IFF_ALLMULTI)); /* multicast all mode */
 	cfblk->rcv_mon = 0;	/* Monitor mode disabled */
 	cfblk->frag_acpt = 0;	/* Do not accept fragments */
 	cfblk->tstrttrs = 0;	/* No start transmission threshold */
-- 
cgit v1.2.3


From fbc450b137e59205b98a172326415cd981c9caa6 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Tue, 23 Feb 2010 09:54:58 +0000
Subject: octeon: convert to use netdev_for_each_mc_addr

Hmm so actually my original patch including this bit was correct,
"list = list->next;" confused me :) - will send patch correcting that in a few.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/octeon/octeon_mgmt.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c
index 3a0f910924a5..be368e5cbf75 100644
--- a/drivers/net/octeon/octeon_mgmt.c
+++ b/drivers/net/octeon/octeon_mgmt.c
@@ -467,7 +467,6 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
 {
 	struct octeon_mgmt *p = netdev_priv(netdev);
 	int port = p->port;
-	int i;
 	union cvmx_agl_gmx_rxx_adr_ctl adr_ctl;
 	union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx;
 	unsigned long flags;
@@ -511,12 +510,8 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
 		}
 	}
 	if (multicast_mode == 0) {
-		i = netdev_mc_count(netdev);
-		list = netdev->mc_list;
-		while (i--) {
+		netdev_for_each_mc_addr(list, netdev)
 			octeon_mgmt_cam_state_add(&cam_state, list->da_addr);
-			list = list->next;
-		}
 	}
 
 
-- 
cgit v1.2.3


From 9c5f9c2861909753140ad6a41cdc77cdf20c1dc9 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 24 Feb 2010 06:00:17 +0000
Subject: isa-skelton: Remove a wrong netif_wake_queue() call

The netif_wake_queue() is called correctly (i.e. only on !txfull
condition) from net_tx().  So Unconditional call to the
netif_wake_queue() here is wrong.  This might cause calling of
start_xmit routine on txfull state and trigger tx-ring overflow.

This fix is ported from commit 662a96bd6f020782dfbdc0d0bd177c7dbb556687
("tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON").

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/isa-skeleton.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index d09e4d3a15a6..9e55c3007743 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -536,7 +536,6 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
 		/* Transmit complete. */
 		net_tx(dev);
 		np->stats.tx_packets++;
-		netif_wake_queue(dev);
 	}
 #endif
 	if (status & COUNTERS_INTR) {
-- 
cgit v1.2.3


From dee7399c2d9a1d3b0af5d68d7e0dd922e104a2a8 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 24 Feb 2010 06:00:34 +0000
Subject: tc35815: Fix double locking on NAPI

Isolate spinlock for tx and rx to resolve double-locking.

This is potential bug while this controller does not exist on any
SMP platforms, but lockdep or rt-preempt reveals this bug.

Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tc35815.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 876f45afbed4..49bd84c0d583 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -402,6 +402,7 @@ struct tc35815_local {
 	 * by this lock as well.
 	 */
 	spinlock_t lock;
+	spinlock_t rx_lock;
 
 	struct mii_bus *mii_bus;
 	struct phy_device *phy_dev;
@@ -835,6 +836,7 @@ static int __devinit tc35815_init_one(struct pci_dev *pdev,
 
 	INIT_WORK(&lp->restart_work, tc35815_restart_work);
 	spin_lock_init(&lp->lock);
+	spin_lock_init(&lp->rx_lock);
 	lp->pci_dev = pdev;
 	lp->chiptype = ent->driver_data;
 
@@ -1186,6 +1188,7 @@ static void tc35815_restart(struct net_device *dev)
 			printk(KERN_ERR "%s: BMCR reset failed.\n", dev->name);
 	}
 
+	spin_lock_bh(&lp->rx_lock);
 	spin_lock_irq(&lp->lock);
 	tc35815_chip_reset(dev);
 	tc35815_clear_queues(dev);
@@ -1193,6 +1196,7 @@ static void tc35815_restart(struct net_device *dev)
 	/* Reconfigure CAM again since tc35815_chip_init() initialize it. */
 	tc35815_set_multicast_list(dev);
 	spin_unlock_irq(&lp->lock);
+	spin_unlock_bh(&lp->rx_lock);
 
 	netif_wake_queue(dev);
 }
@@ -1211,11 +1215,14 @@ static void tc35815_schedule_restart(struct net_device *dev)
 	struct tc35815_local *lp = netdev_priv(dev);
 	struct tc35815_regs __iomem *tr =
 		(struct tc35815_regs __iomem *)dev->base_addr;
+	unsigned long flags;
 
 	/* disable interrupts */
+	spin_lock_irqsave(&lp->lock, flags);
 	tc_writel(0, &tr->Int_En);
 	tc_writel(tc_readl(&tr->DMA_Ctl) | DMA_IntMask, &tr->DMA_Ctl);
 	schedule_work(&lp->restart_work);
+	spin_unlock_irqrestore(&lp->lock, flags);
 }
 
 static void tc35815_tx_timeout(struct net_device *dev)
@@ -1436,7 +1443,9 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
 	if (status & Int_IntMacTx) {
 		/* Transmit complete. */
 		lp->lstats.tx_ints++;
+		spin_lock_irq(&lp->lock);
 		tc35815_txdone(dev);
+		spin_unlock_irq(&lp->lock);
 		if (ret < 0)
 			ret = 0;
 	}
@@ -1649,7 +1658,7 @@ static int tc35815_poll(struct napi_struct *napi, int budget)
 	int received = 0, handled;
 	u32 status;
 
-	spin_lock(&lp->lock);
+	spin_lock(&lp->rx_lock);
 	status = tc_readl(&tr->Int_Src);
 	do {
 		/* BLEx, FDAEx will be cleared later */
@@ -1667,7 +1676,7 @@ static int tc35815_poll(struct napi_struct *napi, int budget)
 		}
 		status = tc_readl(&tr->Int_Src);
 	} while (status);
-	spin_unlock(&lp->lock);
+	spin_unlock(&lp->rx_lock);
 
 	if (received < budget) {
 		napi_complete(napi);
-- 
cgit v1.2.3


From e382c3018ad19744d3c5d281daf4b0e9f052af66 Mon Sep 17 00:00:00 2001
From: "kirjanov@gmail.com" <kirjanov@gmail.com>
Date: Wed, 24 Feb 2010 08:41:18 +0000
Subject: sis190: handle DMA mapping errors

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sis190.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 4487b065ef72..80af4a44580e 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -484,18 +484,24 @@ static struct sk_buff *sis190_alloc_rx_skb(struct sis190_private *tp,
 {
 	u32 rx_buf_sz = tp->rx_buf_sz;
 	struct sk_buff *skb;
+	dma_addr_t mapping;
 
 	skb = netdev_alloc_skb(tp->dev, rx_buf_sz);
-	if (likely(skb)) {
-		dma_addr_t mapping;
-
-		mapping = pci_map_single(tp->pci_dev, skb->data, tp->rx_buf_sz,
-					 PCI_DMA_FROMDEVICE);
-		sis190_map_to_asic(desc, mapping, rx_buf_sz);
-	} else
-		sis190_make_unusable_by_asic(desc);
+	if (unlikely(!skb))
+		goto skb_alloc_failed;
+	mapping = pci_map_single(tp->pci_dev, skb->data, tp->rx_buf_sz,
+			PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(tp->pci_dev, mapping))
+		goto out;
+	sis190_map_to_asic(desc, mapping, rx_buf_sz);
 
 	return skb;
+
+out:
+	dev_kfree_skb_any(skb);
+skb_alloc_failed:
+	sis190_make_unusable_by_asic(desc);
+	return NULL;
 }
 
 static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev,
@@ -1184,6 +1190,11 @@ static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
 	}
 
 	mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(tp->pci_dev, mapping)) {
+		netif_err(tp, tx_err, dev,
+				"PCI mapping failed, dropping packet");
+		return NETDEV_TX_BUSY;
+	}
 
 	tp->Tx_skbuff[entry] = skb;
 
-- 
cgit v1.2.3


From 41a655ba5654e47847505c164f77f8190ca9ed27 Mon Sep 17 00:00:00 2001
From: "kirjanov@gmail.com" <kirjanov@gmail.com>
Date: Wed, 24 Feb 2010 10:25:33 +0000
Subject: greth: convert to netdev_tx_t

Convert to netdev_tx_t
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/greth.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index d2032339f6de..d75b46141603 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -66,8 +66,10 @@ module_param(greth_edcl, int, 0);
 MODULE_PARM_DESC(greth_edcl, "GRETH EDCL usage indicator. Set to 1 if EDCL is used.");
 
 static int greth_open(struct net_device *dev);
-static int greth_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t greth_start_xmit(struct sk_buff *skb,
+	   struct net_device *dev);
+static netdev_tx_t greth_start_xmit_gbit(struct sk_buff *skb,
+	   struct net_device *dev);
 static int greth_rx(struct net_device *dev, int limit);
 static int greth_rx_gbit(struct net_device *dev, int limit);
 static void greth_clean_tx(struct net_device *dev);
@@ -379,7 +381,8 @@ static int greth_close(struct net_device *dev)
 	return 0;
 }
 
-static int greth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+greth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct greth_private *greth = netdev_priv(dev);
 	struct greth_bd *bdp;
@@ -441,7 +444,8 @@ out:
 }
 
 
-static int greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct greth_private *greth = netdev_priv(dev);
 	struct greth_bd *bdp;
-- 
cgit v1.2.3


From 43634e820e393ba48bb2efc3d330dee4203e80d8 Mon Sep 17 00:00:00 2001
From: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Date: Thu, 25 Feb 2010 23:14:37 +0000
Subject: ixgbe: Fix DMA mapping/unmapping issues when HWRSC is enabled on
 IOMMU enabled kernels

Work around 82599 HW issue when HWRSC is enabled on IOMMU enabled
kernels. 82599 HW is updating the header information after setting the
descriptor to done, resulting DMA mapping/unmapping issues on IOMMU
enabled systems. To work around the issue delay unmapping of first packet
that carries the header information until end of packet is reached.

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 32 +++++++++++++++++++++++++++++---
 1 file changed, 29 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 330879004ea1..4a0102218d39 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -818,6 +818,12 @@ static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb,
 	return skb;
 }
 
+struct ixgbe_rsc_cb {
+	dma_addr_t dma;
+};
+
+#define IXGBE_RSC_CB(skb) ((struct ixgbe_rsc_cb *)(skb)->cb)
+
 static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
                                struct ixgbe_ring *rx_ring,
                                int *work_done, int work_to_do)
@@ -867,9 +873,21 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		rx_buffer_info->skb = NULL;
 
 		if (rx_buffer_info->dma) {
-			pci_unmap_single(pdev, rx_buffer_info->dma,
-			                 rx_ring->rx_buf_len,
-			                 PCI_DMA_FROMDEVICE);
+			if ((adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
+			    (!(staterr & IXGBE_RXD_STAT_EOP)) &&
+				 (!(skb->prev)))
+				/*
+				 * When HWRSC is enabled, delay unmapping
+				 * of the first packet. It carries the
+				 * header information, HW may still
+				 * access the header after the writeback.
+				 * Only unmap it when EOP is reached
+				 */
+				IXGBE_RSC_CB(skb)->dma = rx_buffer_info->dma;
+			else
+				pci_unmap_single(pdev, rx_buffer_info->dma,
+				                 rx_ring->rx_buf_len,
+				                 PCI_DMA_FROMDEVICE);
 			rx_buffer_info->dma = 0;
 			skb_put(skb, len);
 		}
@@ -917,6 +935,10 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			if (skb->prev)
 				skb = ixgbe_transform_rsc_queue(skb, &(rx_ring->rsc_count));
 			if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+				if (IXGBE_RSC_CB(skb)->dma)
+					pci_unmap_single(pdev, IXGBE_RSC_CB(skb)->dma,
+					                 rx_ring->rx_buf_len,
+					                 PCI_DMA_FROMDEVICE);
 				if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)
 					rx_ring->rsc_count += skb_shinfo(skb)->nr_frags;
 				else
@@ -3104,6 +3126,10 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 			rx_buffer_info->skb = NULL;
 			do {
 				struct sk_buff *this = skb;
+				if (IXGBE_RSC_CB(this)->dma)
+					pci_unmap_single(pdev, IXGBE_RSC_CB(this)->dma,
+					                 rx_ring->rx_buf_len,
+					                 PCI_DMA_FROMDEVICE);
 				skb = skb->prev;
 				dev_kfree_skb(this);
 			} while (skb);
-- 
cgit v1.2.3


From a922afb64d2e71115f122e04346163cb8c8453e3 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Thu, 25 Feb 2010 23:14:58 +0000
Subject: ixgbe: do not stop tx queues in ixgbe_set_tso

Disabling TSO can cause the dev_watchdog timer to be triggered because
when TSO is disabled netif_tx_stop_all_queues is called.  If the watchdog
timer fires while the queues are stopped and traffic has not recently been
sent on a paticular queue this is falsly identified as a hang and
ndo_tx_timeout() is called.  This is ocossionally seen during testing.

This removes the netif_tx_stop_all_queues() it is not needed.  The scheduler
submits skb's with dev_hard_start_xmit(), this checks if netif_needs_gso and
if so it calls dev_gso_segment.  Disabling TSO will cause dev_hard_start_xmit()
to do the gso processing.   However ixgbe does not use the features flags to
determine if it needs to use tso or not instead it uses skb->gso_size so
ixgbe will process these frames correctly regardless of the netdev features
flag.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_ethtool.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0d234346a4ea..7949a446e4c7 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -441,10 +441,8 @@ static int ixgbe_set_tso(struct net_device *netdev, u32 data)
 		netdev->features |= NETIF_F_TSO;
 		netdev->features |= NETIF_F_TSO6;
 	} else {
-		netif_tx_stop_all_queues(netdev);
 		netdev->features &= ~NETIF_F_TSO;
 		netdev->features &= ~NETIF_F_TSO6;
-		netif_tx_start_all_queues(netdev);
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From c85a26189660e1cfd1f50989468313c544487950 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Thu, 25 Feb 2010 23:15:21 +0000
Subject: ixgbe: Do not allocate too many netdev txqueues

Instead of allocating 128 struct netdev_queue per device, use the
minimum value between 128 and the number of possible txq's, to
reduce ram usage and "tc -s -d class shod dev .." output.

This patch fixes Eric Dumazet's patch to set the TX queues to
the correct minimum.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 4a0102218d39..a961da2f98c0 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5996,6 +5996,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
 	static int cards_found;
 	int i, err, pci_using_dac;
+	unsigned int indices = num_possible_cpus();
 #ifdef IXGBE_FCOE
 	u16 device_caps;
 #endif
@@ -6034,7 +6035,18 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 
-	netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
+	if (ii->mac == ixgbe_mac_82598EB)
+		indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES);
+	else
+		indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES);
+
+	indices = max_t(unsigned int, indices, IXGBE_MAX_DCB_INDICES);
+#ifdef IXGBE_FCOE
+	indices += min_t(unsigned int, num_possible_cpus(),
+			 IXGBE_MAX_FCOE_INDICES);
+#endif
+	indices = min_t(unsigned int, indices, MAX_TX_QUEUES);
+	netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
 	if (!netdev) {
 		err = -ENOMEM;
 		goto err_alloc_etherdev;
-- 
cgit v1.2.3


From a9736c086cc6221659e498f0855152c32dbc1396 Mon Sep 17 00:00:00 2001
From: Eddie Wai <waie@broadcom.com>
Date: Wed, 24 Feb 2010 14:42:04 +0000
Subject: cnic: Finetune iSCSI connection set up.

Initialize IP ID and handle some additional connection errors.

Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c | 17 ++++++++++++++++-
 drivers/net/cnic.h |  2 +-
 2 files changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 6aecef930fa8..0fe83717967a 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2507,7 +2507,7 @@ static int cnic_cm_offload_pg(struct cnic_sock *csk)
 	l4kwqe->sa5 = dev->mac_addr[5];
 
 	l4kwqe->etype = ETH_P_IP;
-	l4kwqe->ipid_count = DEF_IPID_COUNT;
+	l4kwqe->ipid_start = DEF_IPID_START;
 	l4kwqe->host_opaque = csk->l5_cid;
 
 	if (csk->vlan_id) {
@@ -3046,6 +3046,14 @@ static void cnic_cm_process_offld_pg(struct cnic_dev *dev, struct l4_kcq *kcqe)
 		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
 		goto done;
 	}
+	/* Possible PG kcqe status:  SUCCESS, OFFLOADED_PG, or CTX_ALLOC_FAIL */
+	if (kcqe->status == L4_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAIL) {
+		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+		cnic_cm_upcall(cp, csk,
+			       L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE);
+		goto done;
+	}
+
 	csk->pg_cid = kcqe->pg_cid;
 	set_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
 	cnic_cm_conn_req(csk);
@@ -3083,6 +3091,13 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
 	}
 
 	switch (opcode) {
+	case L5CM_RAMROD_CMD_ID_TCP_CONNECT:
+		if (l4kcqe->status != 0) {
+			clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+			cnic_cm_upcall(cp, csk,
+				       L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE);
+		}
+		break;
 	case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE:
 		if (l4kcqe->status == 0)
 			set_bit(SK_F_OFFLD_COMPLETE, &csk->flags);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 241d09acc0d4..1921597ab4a3 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -101,7 +101,7 @@ struct cnic_redirect_entry {
 #define BNX2X_KWQ_DATA(cp, x)						\
 	&(cp)->kwq_16_data[BNX2X_KWQ_DATA_PG(cp, x)][BNX2X_KWQ_DATA_IDX(cp, x)]
 
-#define DEF_IPID_COUNT		0xc001
+#define DEF_IPID_START		0x8000
 
 #define DEF_KA_TIMEOUT		10000
 #define DEF_KA_INTERVAL		300000
-- 
cgit v1.2.3


From 66883e90eaa0dd55d395c0f9a0c6da5d50809804 Mon Sep 17 00:00:00 2001
From: Eddie Wai <waie@broadcom.com>
Date: Wed, 24 Feb 2010 14:42:05 +0000
Subject: cnic: Finetune iSCSI connection reset.

For bnx2 devices, always send notification to bnx2i to let it initiate
the cleanup when RST is received.

For bnx2x devices, add unsolicited RST_COMP handling to start the cleanup.

Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 0fe83717967a..40865aac2afa 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -3108,7 +3108,10 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
 		break;
 
 	case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
-		if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags))
+		if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+			cnic_cm_upcall(cp, csk, opcode);
+			break;
+		} else if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags))
 			csk->state = opcode;
 		/* fall through */
 	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
@@ -3172,6 +3175,16 @@ static int cnic_ready_to_close(struct cnic_sock *csk, u32 opcode)
 		if (!test_and_set_bit(SK_F_CLOSING, &csk->flags))
 			return 1;
 	}
+	/* 57710+ only  workaround to handle unsolicited RESET_COMP
+	 * which will be treated like a RESET RCVD notification
+	 * which triggers the clean up procedure
+	 */
+	else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_COMP) {
+		if (!test_and_set_bit(SK_F_CLOSING, &csk->flags)) {
+			csk->state = L4_KCQE_OPCODE_VALUE_RESET_RECEIVED;
+			return 1;
+		}
+	}
 	return 0;
 }
 
@@ -3181,10 +3194,8 @@ static void cnic_close_bnx2_conn(struct cnic_sock *csk, u32 opcode)
 	struct cnic_local *cp = dev->cnic_priv;
 
 	clear_bit(SK_F_CONNECT_START, &csk->flags);
-	if (cnic_ready_to_close(csk, opcode)) {
-		cnic_close_conn(csk);
-		cnic_cm_upcall(cp, csk, opcode);
-	}
+	cnic_close_conn(csk);
+	cnic_cm_upcall(cp, csk, opcode);
 }
 
 static void cnic_cm_stop_bnx2_hw(struct cnic_dev *dev)
-- 
cgit v1.2.3


From d02a5e6c2fba8b114c44cf05085fca07180f37f1 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Wed, 24 Feb 2010 14:42:06 +0000
Subject: cnic: Fix panic in cnic_iscsi_nl_msg_recv() when device is down.

Some data structures are freed when the device is down and it will
crash if an ISCSI netlink message is received.  Add RCU protection
to prevent this.  In the shutdown path, ulp_ops[CNIC_ULP_L4] is
assigned NULL and rcu_synchronized before freeing the data
structures.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 40865aac2afa..45584442a35c 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -327,6 +327,12 @@ static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
 		if (l5_cid >= MAX_CM_SK_TBL_SZ)
 			break;
 
+		rcu_read_lock();
+		if (!rcu_dereference(cp->ulp_ops[CNIC_ULP_L4])) {
+			rc = -ENODEV;
+			rcu_read_unlock();
+			break;
+		}
 		csk = &cp->csk_tbl[l5_cid];
 		csk_hold(csk);
 		if (cnic_in_use(csk)) {
@@ -341,6 +347,7 @@ static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
 				cnic_cm_set_pg(csk);
 		}
 		csk_put(csk);
+		rcu_read_unlock();
 		rc = 0;
 	}
 	}
-- 
cgit v1.2.3


From c76284af9ec8a010c502a70249cb74b3bb69ec6f Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Wed, 24 Feb 2010 14:42:07 +0000
Subject: cnic: Simplify route checking during iSCSI connection.

With a separate IP address for iSCSI, connections should proceed
whether or not we can get a route to the target from the network stack.
It is possible that the network IP address may not reach the iSCSI target.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c | 37 +++++++++++++------------------------
 1 file changed, 13 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 45584442a35c..0defe61d5bf3 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2860,8 +2860,8 @@ static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
 {
 	struct cnic_dev *dev = csk->dev;
 	struct cnic_local *cp = dev->cnic_priv;
-	int is_v6, err, rc = -ENETUNREACH;
-	struct dst_entry *dst;
+	int is_v6, rc = 0;
+	struct dst_entry *dst = NULL;
 	struct net_device *realdev;
 	u32 local_port;
 
@@ -2877,39 +2877,31 @@ static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
 	clear_bit(SK_F_IPV6, &csk->flags);
 
 	if (is_v6) {
-#if defined(CONFIG_IPV6) || (defined(CONFIG_IPV6_MODULE) && defined(MODULE))
 		set_bit(SK_F_IPV6, &csk->flags);
-		err = cnic_get_v6_route(&saddr->remote.v6, &dst);
-		if (err)
-			return err;
-
-		if (!dst || dst->error || !dst->dev)
-			goto err_out;
+		cnic_get_v6_route(&saddr->remote.v6, &dst);
 
 		memcpy(&csk->dst_ip[0], &saddr->remote.v6.sin6_addr,
 		       sizeof(struct in6_addr));
 		csk->dst_port = saddr->remote.v6.sin6_port;
 		local_port = saddr->local.v6.sin6_port;
-#else
-		return rc;
-#endif
 
 	} else {
-		err = cnic_get_v4_route(&saddr->remote.v4, &dst);
-		if (err)
-			return err;
-
-		if (!dst || dst->error || !dst->dev)
-			goto err_out;
+		cnic_get_v4_route(&saddr->remote.v4, &dst);
 
 		csk->dst_ip[0] = saddr->remote.v4.sin_addr.s_addr;
 		csk->dst_port = saddr->remote.v4.sin_port;
 		local_port = saddr->local.v4.sin_port;
 	}
 
-	csk->vlan_id = cnic_get_vlan(dst->dev, &realdev);
-	if (realdev != dev->netdev)
-		goto err_out;
+	csk->vlan_id = 0;
+	csk->mtu = dev->netdev->mtu;
+	if (dst && dst->dev) {
+		u16 vlan = cnic_get_vlan(dst->dev, &realdev);
+		if (realdev == dev->netdev) {
+			csk->vlan_id = vlan;
+			csk->mtu = dst_mtu(dst);
+		}
+	}
 
 	if (local_port >= CNIC_LOCAL_PORT_MIN &&
 	    local_port < CNIC_LOCAL_PORT_MAX) {
@@ -2927,9 +2919,6 @@ static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
 	}
 	csk->src_port = local_port;
 
-	csk->mtu = dst_mtu(dst);
-	rc = 0;
-
 err_out:
 	dst_release(dst);
 	return rc;
-- 
cgit v1.2.3


From a4dde3abbf87a495154a876576e1ab34b17b5ef1 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Wed, 24 Feb 2010 14:42:08 +0000
Subject: cnic: Use union for the status blocks of different devices.

We only need to assign the status block address once and it also saves
space in the structure.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c | 35 +++++++++++++++++------------------
 drivers/net/cnic.h |  9 ++++++---
 2 files changed, 23 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 0defe61d5bf3..463408f46ba6 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -900,7 +900,8 @@ static int cnic_alloc_uio(struct cnic_dev *dev) {
 	uinfo->mem[0].memtype = UIO_MEM_PHYS;
 
 	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
-		uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
+		uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen &
+			PAGE_MASK;
 		if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
 			uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
 		else
@@ -1103,10 +1104,9 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 	if (ret)
 		goto error;
 
-	cp->bnx2x_status_blk = cp->status_blk;
 	cp->bnx2x_def_status_blk = cp->ethdev->irq_arr[1].status_blk;
 
-	memset(cp->bnx2x_status_blk, 0, sizeof(struct host_status_block));
+	memset(cp->status_blk.bnx2x, 0, sizeof(*cp->status_blk.bnx2x));
 
 	cp->l2_rx_ring_size = 15;
 
@@ -2205,7 +2205,7 @@ static void cnic_service_bnx2_msix(unsigned long data)
 {
 	struct cnic_dev *dev = (struct cnic_dev *) data;
 	struct cnic_local *cp = dev->cnic_priv;
-	struct status_block_msix *status_blk = cp->bnx2_status_blk;
+	struct status_block_msix *status_blk = cp->status_blk.bnx2;
 	u32 status_idx = status_blk->status_idx;
 	u16 hw_prod, sw_prod;
 	int kcqe_cnt;
@@ -2251,7 +2251,7 @@ static irqreturn_t cnic_irq(int irq, void *dev_instance)
 	if (cp->ack_int)
 		cp->ack_int(dev);
 
-	prefetch(cp->status_blk);
+	prefetch(cp->status_blk.gen);
 	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
 
 	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
@@ -2292,7 +2292,7 @@ static void cnic_service_bnx2x_bh(unsigned long data)
 	struct cnic_local *cp = dev->cnic_priv;
 	u16 hw_prod, sw_prod;
 	struct cstorm_status_block_c *sblk =
-		&cp->bnx2x_status_blk->c_status_block;
+		&cp->status_blk.bnx2x->c_status_block;
 	u32 status_idx = sblk->status_block_index;
 	int kcqe_cnt;
 
@@ -2334,7 +2334,7 @@ static int cnic_service_bnx2x(void *data, void *status_blk)
 	struct cnic_local *cp = dev->cnic_priv;
 	u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
 
-	prefetch(cp->status_blk);
+	prefetch(cp->status_blk.bnx2x);
 	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
 
 	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
@@ -3409,8 +3409,7 @@ static int cnic_init_bnx2_irq(struct cnic_dev *dev)
 		CNIC_WR(dev, base + BNX2_HC_COM_TICKS_OFF, (64 << 16) | 220);
 		CNIC_WR(dev, base + BNX2_HC_CMD_TICKS_OFF, (64 << 16) | 220);
 
-		cp->bnx2_status_blk = cp->status_blk;
-		cp->last_status_idx = cp->bnx2_status_blk->status_idx;
+		cp->last_status_idx = cp->status_blk.bnx2->status_idx;
 		tasklet_init(&cp->cnic_irq_task, cnic_service_bnx2_msix,
 			     (unsigned long) dev);
 		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
@@ -3419,7 +3418,7 @@ static int cnic_init_bnx2_irq(struct cnic_dev *dev)
 			tasklet_disable(&cp->cnic_irq_task);
 			return err;
 		}
-		while (cp->bnx2_status_blk->status_completion_producer_index &&
+		while (cp->status_blk.bnx2->status_completion_producer_index &&
 		       i < 10) {
 			CNIC_WR(dev, BNX2_HC_COALESCE_NOW,
 				1 << (11 + sblk_num));
@@ -3427,13 +3426,13 @@ static int cnic_init_bnx2_irq(struct cnic_dev *dev)
 			i++;
 			barrier();
 		}
-		if (cp->bnx2_status_blk->status_completion_producer_index) {
+		if (cp->status_blk.bnx2->status_completion_producer_index) {
 			cnic_free_irq(dev);
 			goto failed;
 		}
 
 	} else {
-		struct status_block *sblk = cp->status_blk;
+		struct status_block *sblk = cp->status_blk.gen;
 		u32 hc_cmd = CNIC_RD(dev, BNX2_HC_COMMAND);
 		int i = 0;
 
@@ -3490,7 +3489,7 @@ static void cnic_init_bnx2_tx_ring(struct cnic_dev *dev)
 	int i;
 	struct tx_bd *txbd;
 	dma_addr_t buf_map;
-	struct status_block *s_blk = cp->status_blk;
+	struct status_block *s_blk = cp->status_blk.gen;
 
 	sb_id = cp->status_blk_num;
 	tx_cid = 20;
@@ -3498,7 +3497,7 @@ static void cnic_init_bnx2_tx_ring(struct cnic_dev *dev)
 	cnic_init_context(dev, tx_cid + 1);
 	cp->tx_cons_ptr = &s_blk->status_tx_quick_consumer_index2;
 	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
-		struct status_block_msix *sblk = cp->status_blk;
+		struct status_block_msix *sblk = cp->status_blk.bnx2;
 
 		tx_cid = TX_TSS_CID + sb_id - 1;
 		cnic_init_context(dev, tx_cid);
@@ -3554,7 +3553,7 @@ static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
 	u32 cid_addr, sb_id, val, coal_reg, coal_val;
 	int i;
 	struct rx_bd *rxbd;
-	struct status_block *s_blk = cp->status_blk;
+	struct status_block *s_blk = cp->status_blk.gen;
 
 	sb_id = cp->status_blk_num;
 	cnic_init_context(dev, 2);
@@ -3562,7 +3561,7 @@ static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
 	coal_reg = BNX2_HC_COMMAND;
 	coal_val = CNIC_RD(dev, coal_reg);
 	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
-		struct status_block_msix *sblk = cp->status_blk;
+		struct status_block_msix *sblk = cp->status_blk.bnx2;
 
 		cp->rx_cons_ptr = &sblk->status_rx_quick_consumer_index;
 		coal_reg = BNX2_HC_COALESCE_NOW;
@@ -3661,7 +3660,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
 	struct cnic_eth_dev *ethdev = cp->ethdev;
-	struct status_block *sblk = cp->status_blk;
+	struct status_block *sblk = cp->status_blk.gen;
 	u32 val;
 	int err;
 
@@ -4250,7 +4249,7 @@ static int cnic_start_hw(struct cnic_dev *dev)
 	cp->chip_id = ethdev->chip_id;
 	pci_dev_get(dev->pcidev);
 	cp->func = PCI_FUNC(dev->pcidev->devfn);
-	cp->status_blk = ethdev->irq_arr[0].status_blk;
+	cp->status_blk.gen = ethdev->irq_arr[0].status_blk;
 	cp->status_blk_num = ethdev->irq_arr[0].status_blk_num;
 
 	err = cp->alloc_resc(dev);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 1921597ab4a3..d566390b8c4d 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -224,9 +224,12 @@ struct cnic_local {
 	u16		kcq_prod_idx;
 	u32		kcq_io_addr;
 
-	void				*status_blk;
-	struct status_block_msix	*bnx2_status_blk;
-	struct host_status_block	*bnx2x_status_blk;
+	union {
+		void				*gen;
+		struct status_block_msix	*bnx2;
+		struct host_status_block	*bnx2x;
+	} status_blk;
+
 	struct host_def_status_block	*bnx2x_def_status_blk;
 
 	u32				status_blk_num;
-- 
cgit v1.2.3


From 1d9cfc4e354cd619d92bb938657dec3c533e6929 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Wed, 24 Feb 2010 14:42:09 +0000
Subject: cnic: Update version to 2.1.1.

And update copyright to 2010.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cnic.c      | 2 +-
 drivers/net/cnic.h      | 2 +-
 drivers/net/cnic_defs.h | 2 +-
 drivers/net/cnic_if.h   | 6 +++---
 4 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 463408f46ba6..9781942992e9 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -1,6 +1,6 @@
 /* cnic.c: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006-2009 Broadcom Corporation
+ * Copyright (c) 2006-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index d566390b8c4d..a0d853dff983 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -1,6 +1,6 @@
 /* cnic.h: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006-2009 Broadcom Corporation
+ * Copyright (c) 2006-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
index 9827b278dc7c..7ce694d41b6b 100644
--- a/drivers/net/cnic_defs.h
+++ b/drivers/net/cnic_defs.h
@@ -1,7 +1,7 @@
 
 /* cnic.c: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006-2009 Broadcom Corporation
+ * Copyright (c) 2006-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index 8aaf98bdd4f7..110c62072e6f 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -1,6 +1,6 @@
 /* cnic_if.h: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006 Broadcom Corporation
+ * Copyright (c) 2006-2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,8 +12,8 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.1.0"
-#define CNIC_MODULE_RELDATE	"Oct 10, 2009"
+#define CNIC_MODULE_VERSION	"2.1.1"
+#define CNIC_MODULE_RELDATE	"Feb 22, 2010"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
-- 
cgit v1.2.3


From 2a3f279034b46204b50408aa2c25ee0882120147 Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Wed, 24 Feb 2010 12:11:19 +0000
Subject: myri10ge: optimize 4k-boundary check when stocking rx pages

Small optimization to the code which checks to see if we'd cross
a 4K boundary when stocking RX ring.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew Gallatin <gallatin@myri.com>
Signed-off-by: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/myri10ge/myri10ge.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index aae2ddb5d827..676c513e12fc 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -77,7 +77,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.5.1-1.453"
+#define MYRI10GE_VERSION_STR "1.5.2-1.459"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -1200,6 +1200,9 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
 {
 	struct page *page;
 	int idx;
+#if MYRI10GE_ALLOC_SIZE > 4096
+	int end_offset;
+#endif
 
 	if (unlikely(rx->watchdog_needed && !watchdog))
 		return;
@@ -1241,9 +1244,9 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
 
 #if MYRI10GE_ALLOC_SIZE > 4096
 		/* don't cross a 4KB boundary */
-		if ((rx->page_offset >> 12) !=
-		    ((rx->page_offset + bytes - 1) >> 12))
-			rx->page_offset = (rx->page_offset + 4096) & ~4095;
+		end_offset = rx->page_offset + bytes - 1;
+		if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
+			rx->page_offset = end_offset & ~4095;
 #endif
 		rx->fill_cnt++;
 
-- 
cgit v1.2.3


From c43491d73ea04277c92a4aa1a7e63ccab4577756 Mon Sep 17 00:00:00 2001
From: Simon Horman <horms@verge.net.au>
Date: Thu, 25 Feb 2010 13:50:19 +0000
Subject: greth: fall through to common return statement on error

There doesn't seem to be any reason to explicitly return
NETDEV_TX_OK as err is set to NETDEV_TX_OK in all cases that
reach this point.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/greth.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index d75b46141603..2b9c1cbc9ec1 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -560,8 +560,6 @@ map_error:
 	if (net_ratelimit())
 		dev_warn(greth->dev, "Could not create TX DMA mapping\n");
 	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-
 out:
 	return err;
 }
-- 
cgit v1.2.3


From 773c3e75d1fc7ea5058bfeab5d82bac5b85f8cd8 Mon Sep 17 00:00:00 2001
From: Sriramakrishnan <srk@ti.com>
Date: Fri, 26 Feb 2010 05:22:03 -0800
Subject: can: ti hecc module : add platform specific initialization callback.

CAN module on AM3517 requires programming of IO expander as part
of init sequence - to enable CAN PHY. Added platform specific
callback to handle phy control(switch on /off).

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/ti_hecc.c            | 17 ++++++++++++++++-
 include/linux/can/platform/ti_hecc.h |  8 ++++++--
 2 files changed, 22 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index b861cd561074..0c3d2ba0d178 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -28,9 +28,11 @@
  *         .mbx_offset             = 0x2000,
  *         .int_line               = 0,
  *         .revision               = 1,
+ *         .transceiver_switch     = hecc_phy_control,
  * };
  *
- * Please see include/can/platform/ti_hecc.h for description of above fields
+ * Please see include/linux/can/platform/ti_hecc.h for description of
+ * above fields.
  *
  */
 
@@ -220,6 +222,7 @@ struct ti_hecc_priv {
 	u32 tx_head;
 	u32 tx_tail;
 	u32 rx_next;
+	void (*transceiver_switch)(int);
 };
 
 static inline int get_tx_head_mb(struct ti_hecc_priv *priv)
@@ -317,6 +320,13 @@ static int ti_hecc_set_btc(struct ti_hecc_priv *priv)
 	return 0;
 }
 
+static void ti_hecc_transceiver_switch(const struct ti_hecc_priv *priv,
+					int on)
+{
+	if (priv->transceiver_switch)
+		priv->transceiver_switch(on);
+}
+
 static void ti_hecc_reset(struct net_device *ndev)
 {
 	u32 cnt;
@@ -818,10 +828,13 @@ static int ti_hecc_open(struct net_device *ndev)
 		return err;
 	}
 
+	ti_hecc_transceiver_switch(priv, 1);
+
 	/* Open common can device */
 	err = open_candev(ndev);
 	if (err) {
 		dev_err(ndev->dev.parent, "open_candev() failed %d\n", err);
+		ti_hecc_transceiver_switch(priv, 0);
 		free_irq(ndev->irq, ndev);
 		return err;
 	}
@@ -842,6 +855,7 @@ static int ti_hecc_close(struct net_device *ndev)
 	ti_hecc_stop(ndev);
 	free_irq(ndev->irq, ndev);
 	close_candev(ndev);
+	ti_hecc_transceiver_switch(priv, 0);
 
 	return 0;
 }
@@ -903,6 +917,7 @@ static int ti_hecc_probe(struct platform_device *pdev)
 	priv->hecc_ram_offset = pdata->hecc_ram_offset;
 	priv->mbx_offset = pdata->mbx_offset;
 	priv->int_line = pdata->int_line;
+	priv->transceiver_switch = pdata->transceiver_switch;
 
 	priv->can.bittiming_const = &ti_hecc_bittiming_const;
 	priv->can.do_set_mode = ti_hecc_do_set_mode;
diff --git a/include/linux/can/platform/ti_hecc.h b/include/linux/can/platform/ti_hecc.h
index 4688c7bb1bd1..af17cb3f7a84 100644
--- a/include/linux/can/platform/ti_hecc.h
+++ b/include/linux/can/platform/ti_hecc.h
@@ -1,3 +1,6 @@
+#ifndef __CAN_PLATFORM_TI_HECC_H__
+#define __CAN_PLATFORM_TI_HECC_H__
+
 /*
  * TI HECC (High End CAN Controller) driver platform header
  *
@@ -23,6 +26,7 @@
  * @mbx_offset:		Mailbox RAM offset
  * @int_line:		Interrupt line to use - 0 or 1
  * @version:		version for future use
+ * @transceiver_switch:	platform specific callback fn for transceiver control
  *
  * Platform data structure to get all platform specific settings.
  * this structure also accounts the fact that the IP may have different
@@ -35,6 +39,6 @@ struct ti_hecc_platform_data {
 	u32 mbx_offset;
 	u32 int_line;
 	u32 version;
+	void (*transceiver_switch) (int);
 };
-
-
+#endif
-- 
cgit v1.2.3


From 8266d7127c1b0bdf924066c19c71be4d351e9583 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@redhat.com>
Date: Fri, 26 Feb 2010 12:49:20 -0800
Subject: net: Delete isa-skeleton net driver

The ISA skeleton net driver has been obsolete and unmaintained for many
years.  Any hardware remotely like ISA will use the platform API and
look much more like a PCI driver, and make much better use of netdev
APIs such as NAPI.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/isa-skeleton.c | 718 ---------------------------------------------
 1 file changed, 718 deletions(-)
 delete mode 100644 drivers/net/isa-skeleton.c

(limited to 'drivers/net')

diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
deleted file mode 100644
index 9e55c3007743..000000000000
--- a/drivers/net/isa-skeleton.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* isa-skeleton.c: A network driver outline for linux.
- *
- *	Written 1993-94 by Donald Becker.
- *
- *	Copyright 1993 United States Government as represented by the
- *	Director, National Security Agency.
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU General Public License, incorporated herein by reference.
- *
- *	The author may be reached as becker@scyld.com, or C/O
- *	Scyld Computing Corporation
- *	410 Severn Ave., Suite 210
- *	Annapolis MD 21403
- *
- *	This file is an outline for writing a network device driver for the
- *	the Linux operating system.
- *
- *	To write (or understand) a driver, have a look at the "loopback.c" file to
- *	get a feel of what is going on, and then use the code below as a skeleton
- *	for the new driver.
- *
- */
-
-static const char *version =
-	"isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-/*
- *  Sources:
- *	List your sources of programming information to document that
- *	the driver is your own creation, and give due credit to others
- *	that contributed to the work. Remember that GNU project code
- *	cannot use proprietary or trade secret information. Interface
- *	definitions are generally considered non-copyrightable to the
- *	extent that the same names and structures must be used to be
- *	compatible.
- *
- *	Finally, keep in mind that the Linux kernel is has an API, not
- *	ABI. Proprietary object-code-only distributions are not permitted
- *	under the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-/*
- * The name of the card. Is used for messages and in the requests for
- * io regions, irqs and dma channels
- */
-static const char* cardname = "netcard";
-
-/* First, a few definitions that the brave might change. */
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int netcard_portlist[] __initdata =
-   { 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 2
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-/* The number of low I/O ports used by the ethercard. */
-#define NETCARD_IO_EXTENT	32
-
-#define MY_TX_TIMEOUT  ((400*HZ)/1000)
-
-/* Information that need to be kept for each board. */
-struct net_local {
-	struct net_device_stats stats;
-	long open_time;			/* Useless example local info. */
-
-	/* Tx control lock.  This protects the transmit buffer ring
-	 * state along with the "tx full" state of the driver.  This
-	 * means all netif_queue flow control actions are protected
-	 * by this lock as well.
-	 */
-	spinlock_t lock;
-};
-
-/* The station (ethernet) address prefix, used for IDing the board. */
-#define SA_ADDR0 0x00
-#define SA_ADDR1 0x42
-#define SA_ADDR2 0x65
-
-/* Index to functions, as function prototypes. */
-
-static int	netcard_probe1(struct net_device *dev, int ioaddr);
-static int	net_open(struct net_device *dev);
-static int	net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void	net_rx(struct net_device *dev);
-static int	net_close(struct net_device *dev);
-static struct	net_device_stats *net_get_stats(struct net_device *dev);
-static void	set_multicast_list(struct net_device *dev);
-static void     net_tx_timeout(struct net_device *dev);
-
-
-/* Example routines you must write ;->. */
-#define tx_done(dev) 1
-static void	hardware_send_packet(short ioaddr, char *buf, int length);
-static void 	chipset_init(struct net_device *dev, int startp);
-
-/*
- * Check for a network adaptor of this type, and return '0' iff one exists.
- * If dev->base_addr == 0, probe all likely locations.
- * If dev->base_addr == 1, always return failure.
- * If dev->base_addr == 2, allocate space for the device and return success
- * (detachable devices only).
- */
-static int __init do_netcard_probe(struct net_device *dev)
-{
-	int i;
-	int base_addr = dev->base_addr;
-	int irq = dev->irq;
-
-	if (base_addr > 0x1ff)    /* Check a single specified location. */
-		return netcard_probe1(dev, base_addr);
-	else if (base_addr != 0)  /* Don't probe at all. */
-		return -ENXIO;
-
-	for (i = 0; netcard_portlist[i]; i++) {
-		int ioaddr = netcard_portlist[i];
-		if (netcard_probe1(dev, ioaddr) == 0)
-			return 0;
-		dev->irq = irq;
-	}
-
-	return -ENODEV;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
-#ifdef jumpered_dma
-	free_dma(dev->dma);
-#endif
-#ifdef jumpered_interrupts
-	free_irq(dev->irq, dev);
-#endif
-	release_region(dev->base_addr, NETCARD_IO_EXTENT);
-}
-
-#ifndef MODULE
-struct net_device * __init netcard_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = do_netcard_probe(dev);
-	if (err)
-		goto out;
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops netcard_netdev_ops = {
-	.ndo_open		= net_open,
-	.ndo_stop		= net_close,
-	.ndo_start_xmit		= net_send_packet,
-	.ndo_get_stats		= net_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
-	.ndo_tx_timeout		= net_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-};
-
-/*
- * This is the real probe routine. Linux has a history of friendly device
- * probes on the ISA bus. A good device probes avoids doing writes, and
- * verifies that the correct device exists and functions.
- */
-static int __init netcard_probe1(struct net_device *dev, int ioaddr)
-{
-	struct net_local *np;
-	static unsigned version_printed;
-	int i;
-	int err = -ENODEV;
-
-	/* Grab the region so that no one else tries to probe our ioports. */
-	if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
-		return -EBUSY;
-
-	/*
-	 * For ethernet adaptors the first three octets of the station address
-	 * contains the manufacturer's unique code. That might be a good probe
-	 * method. Ideally you would add additional checks.
-	 */
-	if (inb(ioaddr + 0) != SA_ADDR0 ||
-	    inb(ioaddr + 1) != SA_ADDR1 ||
-	    inb(ioaddr + 2) != SA_ADDR2)
-		goto out;
-
-	if (net_debug  &&  version_printed++ == 0)
-		printk(KERN_DEBUG "%s", version);
-
-	printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
-
-	/* Fill in the 'dev' fields. */
-	dev->base_addr = ioaddr;
-
-	/* Retrieve and print the ethernet address. */
-	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = inb(ioaddr + i);
-
-	printk("%pM", dev->dev_addr);
-
-	err = -EAGAIN;
-#ifdef jumpered_interrupts
-	/*
-	 * If this board has jumpered interrupts, allocate the interrupt
-	 * vector now. There is no point in waiting since no other device
-	 * can use the interrupt, and this marks the irq as busy. Jumpered
-	 * interrupts are typically not reported by the boards, and we must
-	 * used autoIRQ to find them.
-	 */
-
-	if (dev->irq == -1)
-		;	/* Do nothing: a user-level program will set it. */
-	else if (dev->irq < 2) {	/* "Auto-IRQ" */
-		unsigned long irq_mask = probe_irq_on();
-		/* Trigger an interrupt here. */
-
-		dev->irq = probe_irq_off(irq_mask);
-		if (net_debug >= 2)
-			printk(" autoirq is %d", dev->irq);
-	} else if (dev->irq == 2)
-		/*
-		 * Fixup for users that don't know that IRQ 2 is really
-		 * IRQ9, or don't know which one to set.
-		 */
-		dev->irq = 9;
-
-	{
-		int irqval = request_irq(dev->irq, net_interrupt, 0, cardname, dev);
-		if (irqval) {
-			printk("%s: unable to get IRQ %d (irqval=%d).\n",
-				   dev->name, dev->irq, irqval);
-			goto out;
-		}
-	}
-#endif	/* jumpered interrupt */
-#ifdef jumpered_dma
-	/*
-	 * If we use a jumpered DMA channel, that should be probed for and
-	 * allocated here as well. See lance.c for an example.
-	 */
-	if (dev->dma == 0) {
-		if (request_dma(dev->dma, cardname)) {
-			printk("DMA %d allocation failed.\n", dev->dma);
-			goto out1;
-		} else
-			printk(", assigned DMA %d.\n", dev->dma);
-	} else {
-		short dma_status, new_dma_status;
-
-		/* Read the DMA channel status registers. */
-		dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
-			(inb(DMA2_STAT_REG) & 0xf0);
-		/* Trigger a DMA request, perhaps pause a bit. */
-		outw(0x1234, ioaddr + 8);
-		/* Re-read the DMA status registers. */
-		new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
-			(inb(DMA2_STAT_REG) & 0xf0);
-		/*
-		 * Eliminate the old and floating requests,
-		 * and DMA4 the cascade.
-		 */
-		new_dma_status ^= dma_status;
-		new_dma_status &= ~0x10;
-		for (i = 7; i > 0; i--)
-			if (test_bit(i, &new_dma_status)) {
-				dev->dma = i;
-				break;
-			}
-		if (i <= 0) {
-			printk("DMA probe failed.\n");
-			goto out1;
-		}
-		if (request_dma(dev->dma, cardname)) {
-			printk("probed DMA %d allocation failed.\n", dev->dma);
-			goto out1;
-		}
-	}
-#endif	/* jumpered DMA */
-
-	np = netdev_priv(dev);
-	spin_lock_init(&np->lock);
-
-        dev->netdev_ops		= &netcard_netdev_ops;
-        dev->watchdog_timeo	= MY_TX_TIMEOUT;
-
-	err = register_netdev(dev);
-	if (err)
-		goto out2;
-	return 0;
-out2:
-#ifdef jumpered_dma
-	free_dma(dev->dma);
-#endif
-out1:
-#ifdef jumpered_interrupts
-	free_irq(dev->irq, dev);
-#endif
-out:
-	release_region(base_addr, NETCARD_IO_EXTENT);
-	return err;
-}
-
-static void net_tx_timeout(struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-
-	printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
-	       tx_done(dev) ? "IRQ conflict" : "network cable problem");
-
-	/* Try to restart the adaptor. */
-	chipset_init(dev, 1);
-
-	np->stats.tx_errors++;
-
-	/* If we have space available to accept new transmit
-	 * requests, wake up the queueing layer.  This would
-	 * be the case if the chipset_init() call above just
-	 * flushes out the tx queue and empties it.
-	 *
-	 * If instead, the tx queue is retained then the
-	 * netif_wake_queue() call should be placed in the
-	 * TX completion interrupt handler of the driver instead
-	 * of here.
-	 */
-	if (!tx_full(dev))
-		netif_wake_queue(dev);
-}
-
-/*
- * Open/initialize the board. This is called (in the current kernel)
- * sometime after booting when the 'ifconfig' program is run.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is non-reboot way to recover if something goes wrong.
- */
-static int
-net_open(struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	/*
-	 * This is used if the interrupt line can turned off (shared).
-	 * See 3c503.c for an example of selecting the IRQ at config-time.
-	 */
-	if (request_irq(dev->irq, net_interrupt, 0, cardname, dev)) {
-		return -EAGAIN;
-	}
-	/*
-	 * Always allocate the DMA channel after the IRQ,
-	 * and clean up on failure.
-	 */
-	if (request_dma(dev->dma, cardname)) {
-		free_irq(dev->irq, dev);
-		return -EAGAIN;
-	}
-
-	/* Reset the hardware here. Don't forget to set the station address. */
-	chipset_init(dev, 1);
-	outb(0x00, ioaddr);
-	np->open_time = jiffies;
-
-	/* We are now ready to accept transmit requeusts from
-	 * the queueing layer of the networking.
-	 */
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-/* This will only be invoked if your driver is _not_ in XOFF state.
- * What this means is that you need not check it, and that this
- * invariant will hold if you make sure that the netif_*_queue()
- * calls are done at the proper times.
- */
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-	unsigned char *buf = skb->data;
-
-	/* If some error occurs while trying to transmit this
-	 * packet, you should return '1' from this function.
-	 * In such a case you _may not_ do anything to the
-	 * SKB, it is still owned by the network queueing
-	 * layer when an error is returned.  This means you
-	 * may not modify any SKB fields, you may not free
-	 * the SKB, etc.
-	 */
-
-#if TX_RING
-	/* This is the most common case for modern hardware.
-	 * The spinlock protects this code from the TX complete
-	 * hardware interrupt handler.  Queue flow control is
-	 * thus managed under this lock as well.
-	 */
-	unsigned long flags;
-	spin_lock_irqsave(&np->lock, flags);
-
-	add_to_tx_ring(np, skb, length);
-	dev->trans_start = jiffies;
-
-	/* If we just used up the very last entry in the
-	 * TX ring on this device, tell the queueing
-	 * layer to send no more.
-	 */
-	if (tx_full(dev))
-		netif_stop_queue(dev);
-
-	/* When the TX completion hw interrupt arrives, this
-	 * is when the transmit statistics are updated.
-	 */
-
-	spin_unlock_irqrestore(&np->lock, flags);
-#else
-	/* This is the case for older hardware which takes
-	 * a single transmit buffer at a time, and it is
-	 * just written to the device via PIO.
-	 *
-	 * No spin locking is needed since there is no TX complete
-	 * event.  If by chance your card does have a TX complete
-	 * hardware IRQ then you may need to utilize np->lock here.
-	 */
-	hardware_send_packet(ioaddr, buf, length);
-	np->stats.tx_bytes += skb->len;
-
-	dev->trans_start = jiffies;
-
-	/* You might need to clean up and record Tx statistics here. */
-	if (inw(ioaddr) == /*RU*/81)
-		np->stats.tx_aborted_errors++;
-	dev_kfree_skb (skb);
-#endif
-
-	return NETDEV_TX_OK;
-}
-
-#if TX_RING
-/* This handles TX complete events posted by the device
- * via interrupts.
- */
-void net_tx(struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-	int entry;
-
-	/* This protects us from concurrent execution of
-	 * our dev->hard_start_xmit function above.
-	 */
-	spin_lock(&np->lock);
-
-	entry = np->tx_old;
-	while (tx_entry_is_sent(np, entry)) {
-		struct sk_buff *skb = np->skbs[entry];
-
-		np->stats.tx_bytes += skb->len;
-		dev_kfree_skb_irq (skb);
-
-		entry = next_tx_entry(np, entry);
-	}
-	np->tx_old = entry;
-
-	/* If we had stopped the queue due to a "tx full"
-	 * condition, and space has now been made available,
-	 * wake up the queue.
-	 */
-	if (netif_queue_stopped(dev) && ! tx_full(dev))
-		netif_wake_queue(dev);
-
-	spin_unlock(&np->lock);
-}
-#endif
-
-/*
- * The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct net_local *np;
-	int ioaddr, status;
-	int handled = 0;
-
-	ioaddr = dev->base_addr;
-
-	np = netdev_priv(dev);
-	status = inw(ioaddr + 0);
-
-	if (status == 0)
-		goto out;
-	handled = 1;
-
-	if (status & RX_INTR) {
-		/* Got a packet(s). */
-		net_rx(dev);
-	}
-#if TX_RING
-	if (status & TX_INTR) {
-		/* Transmit complete. */
-		net_tx(dev);
-		np->stats.tx_packets++;
-	}
-#endif
-	if (status & COUNTERS_INTR) {
-		/* Increment the appropriate 'localstats' field. */
-		np->stats.tx_window_errors++;
-	}
-out:
-	return IRQ_RETVAL(handled);
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	int boguscount = 10;
-
-	do {
-		int status = inw(ioaddr);
-		int pkt_len = inw(ioaddr);
-
-		if (pkt_len == 0)		/* Read all the frames? */
-			break;			/* Done for now */
-
-		if (status & 0x40) {	/* There was an error. */
-			lp->stats.rx_errors++;
-			if (status & 0x20) lp->stats.rx_frame_errors++;
-			if (status & 0x10) lp->stats.rx_over_errors++;
-			if (status & 0x08) lp->stats.rx_crc_errors++;
-			if (status & 0x04) lp->stats.rx_fifo_errors++;
-		} else {
-			/* Malloc up new buffer. */
-			struct sk_buff *skb;
-
-			lp->stats.rx_bytes+=pkt_len;
-
-			skb = dev_alloc_skb(pkt_len);
-			if (skb == NULL) {
-				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-					   dev->name);
-				lp->stats.rx_dropped++;
-				break;
-			}
-			skb->dev = dev;
-
-			/* 'skb->data' points to the start of sk_buff data area. */
-			memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
-				   pkt_len);
-			/* or */
-			insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
-
-			netif_rx(skb);
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes += pkt_len;
-		}
-	} while (--boguscount);
-
-	return;
-}
-
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	lp->open_time = 0;
-
-	netif_stop_queue(dev);
-
-	/* Flush the Tx and disable Rx here. */
-
-	disable_dma(dev->dma);
-
-	/* If not IRQ or DMA jumpered, free up the line. */
-	outw(0x00, ioaddr+0);	/* Release the physical interrupt line. */
-
-	free_irq(dev->irq, dev);
-	free_dma(dev->dma);
-
-	/* Update the statistics here. */
-
-	return 0;
-
-}
-
-/*
- * Get the current statistics.
- * This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	short ioaddr = dev->base_addr;
-
-	/* Update the statistics from the device registers. */
-	lp->stats.rx_missed_errors = inw(ioaddr+1);
-	return &lp->stats;
-}
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * num_addrs == -1	Promiscuous mode, receive all packets
- * num_addrs == 0	Normal mode, clear multicast list
- * num_addrs > 0	Multicast mode, receive normal and MC packets,
- *			and do best-effort filtering.
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	short ioaddr = dev->base_addr;
-	if (dev->flags&IFF_PROMISC)
-	{
-		/* Enable promiscuous mode */
-		outw(MULTICAST|PROMISC, ioaddr);
-	}
-	else if ((dev->flags&IFF_ALLMULTI) ||
-		 netdev_mc_count(dev) > HW_MAX_ADDRS)
-	{
-		/* Disable promiscuous mode, use normal mode. */
-		hardware_set_filter(NULL);
-
-		outw(MULTICAST, ioaddr);
-	}
-	else if (!netdev_mc_empty(dev))
-	{
-		/* Walk the address list, and load the filter */
-		hardware_set_filter(dev);
-
-		outw(MULTICAST, ioaddr);
-	}
-	else
-		outw(0, ioaddr);
-}
-
-#ifdef MODULE
-
-static struct net_device *this_device;
-static int io = 0x300;
-static int irq;
-static int dma;
-static int mem;
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
-	struct net_device *dev;
-	int result;
-
-	if (io == 0)
-		printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
-			   cardname);
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev)
-		return -ENOMEM;
-
-	/* Copy the parameters from insmod into the device structure. */
-	dev->base_addr = io;
-	dev->irq       = irq;
-	dev->dma       = dma;
-	dev->mem_start = mem;
-	if (do_netcard_probe(dev) == 0) {
-		this_device = dev;
-		return 0;
-	}
-	free_netdev(dev);
-	return -ENXIO;
-}
-
-void
-cleanup_module(void)
-{
-	unregister_netdev(this_device);
-	cleanup_card(this_device);
-	free_netdev(this_device);
-}
-
-#endif /* MODULE */
-- 
cgit v1.2.3


From 7bfbae10dc10a5c94a780d117a57e875d77e8e5a Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 24 Feb 2010 04:43:05 +0100
Subject: ath9k: disable RIFS search for AR91xx based chips

While ath9k does not support RIFS yet, the ability to receive RIFS
frames is currently enabled for most chipsets in the initvals.
This is causing baseband related issues on AR9160 and AR9130 based
chipsets, which can lock up under certain conditions.

This patch fixes these issues by overriding the initvals, effectively
disabling RIFS for all affected chipsets.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.c  | 10 ++++++++++
 drivers/net/wireless/ath/ath9k/phy.h |  3 +++
 2 files changed, 13 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f00f5c744f48..2e767cf22f1e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1310,6 +1310,16 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
 	 * Necessary to avoid issues on AR5416 2.0
 	 */
 	REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
+
+	/*
+	 * Disable RIFS search on some chips to avoid baseband
+	 * hang issues.
+	 */
+	if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
+		val = REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS);
+		val &= ~AR_PHY_RIFS_INIT_DELAY;
+		REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val);
+	}
 }
 
 static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 31de27dc0c4a..0999a495fd46 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -384,6 +384,9 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 
 #define AR_PHY_HEAVY_CLIP_ENABLE         0x99E0
 
+#define AR_PHY_HEAVY_CLIP_FACTOR_RIFS    0x99EC
+#define AR_PHY_RIFS_INIT_DELAY         0x03ff0000
+
 #define AR_PHY_M_SLEEP      0x99f0
 #define AR_PHY_REFCLKDLY    0x99f4
 #define AR_PHY_REFCLKPD     0x99f8
-- 
cgit v1.2.3


From 9e3bd9190800e8209b4a3e1d724c35f0738dcad2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 26 Feb 2010 10:34:27 -0800
Subject: b43: fall back gracefully to PIO mode after fatal DMA errors

This makes the b43 driver just automatically fall back to PIO mode when
DMA doesn't work.

The driver already told the user to do it, so rather than have the user
reload the module with a new flag, just make the driver do it
automatically. We keep the message as an indication that something is
wrong, but now just automatically fall back to the hopefully working PIO
case.

(Some post-2.6.33 merge fixups by Larry Finger <Larry.Finger@lwfinger.net>
and yours truly... -- JWL)

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/Kconfig | 17 ++++++++++++++++-
 drivers/net/wireless/b43/b43.h   |  7 +++++++
 drivers/net/wireless/b43/main.c  | 14 ++++++++------
 3 files changed, 31 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 073be566d05e..0a00d42642cd 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,7 +3,6 @@ config B43
 	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
-	select SSB_BLOCKIO
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
 
@@ -79,6 +78,14 @@ config B43_SDIO
 
 	  If unsure, say N.
 
+#Data transfers to the device via PIO. We want it as a fallback even
+# if we can do DMA.
+config B43_PIO
+	bool
+	depends on B43
+	select SSB_BLOCKIO
+	default y
+
 config B43_NPHY
 	bool "Pre IEEE 802.11n support (BROKEN)"
 	depends on B43 && EXPERIMENTAL && BROKEN
@@ -130,4 +137,12 @@ config B43_DEBUG
 	  for production use.
 	  Only say Y, if you are debugging a problem in the b43 driver sourcecode.
 
+config B43_FORCE_PIO
+	bool "Force usage of PIO instead of DMA"
+	depends on B43 && B43_DEBUG
+	---help---
+	  This will disable DMA and always enable PIO instead.
 
+	  Say N!
+	  This is only for debugging the PIO engine code. You do
+	  _NOT_ want to enable this.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 6a6ab0f630e5..b8807fb12c92 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -702,6 +702,7 @@ struct b43_wldev {
 	bool radio_hw_enable;	/* saved state of radio hardware enabled state */
 	bool qos_enabled;		/* TRUE, if QoS is used. */
 	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
+	bool use_pio;			/* TRUE if next init should use PIO */
 
 	/* PHY/Radio device. */
 	struct b43_phy phy;
@@ -886,6 +887,12 @@ static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 	return dev->__using_pio_transfers;
 }
 
+#ifdef CONFIG_B43_FORCE_PIO
+# define B43_PIO_DEFAULT 1
+#else
+# define B43_PIO_DEFAULT 0
+#endif
+
 /* Message printing */
 void b43info(struct b43_wl *wl, const char *fmt, ...)
     __attribute__ ((format(printf, 2, 3)));
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8f7a8c0ec27d..16580d0d3a02 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -107,9 +107,9 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
 module_param_named(verbose, b43_modparam_verbose, int, 0644);
 MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
 
-static int modparam_pio;
-module_param_named(pio, modparam_pio, int, 0444);
-MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
+int b43_modparam_pio = B43_PIO_DEFAULT;
+module_param_named(pio, b43_modparam_pio, int, 0644);
+MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
 
 static const struct ssb_device_id b43_ssb_tbl[] = {
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@@ -1804,8 +1804,9 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
 			       dma_reason[4], dma_reason[5]);
 			b43err(dev->wl, "This device does not support DMA "
 			       "on your system. Please use PIO instead.\n");
-			b43err(dev->wl, "Unload the b43 module and reload "
-			       "with 'pio=1'\n");
+			/* Fall back to PIO transfers if we get fatal DMA errors! */
+			dev->use_pio = 1;
+			b43_controller_restart(dev, "DMA error");
 			return;
 		}
 		if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -4357,7 +4358,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 
 	if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
 	    (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
-	    modparam_pio) {
+	    dev->use_pio) {
 		dev->__using_pio_transfers = 1;
 		err = b43_pio_init(dev);
 	} else {
@@ -4824,6 +4825,7 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl)
 	if (!wldev)
 		goto out;
 
+	wldev->use_pio = b43_modparam_pio;
 	wldev->dev = dev;
 	wldev->wl = wl;
 	b43_set_status(wldev, B43_STAT_UNINIT);
-- 
cgit v1.2.3


From fcb6a1c83e48c30ff99624e9c46ce301707ede05 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 26 Feb 2010 12:00:47 +0000
Subject: fs_enet: use dev_xxx instead of printk

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fs_enet/fs_enet-main.c | 39 +++++++++++++++-----------------------
 drivers/net/fs_enet/mac-fcc.c      |  5 +++--
 drivers/net/fs_enet/mac-fec.c      | 12 +++++-------
 drivers/net/fs_enet/mac-scc.c      |  9 ++++-----
 4 files changed, 27 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index ec2f5034457f..c34a7e0a28ed 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -108,9 +108,7 @@ static int fs_enet_rx_napi(struct napi_struct *napi, int budget)
 		 * the last indicator should be set.
 		 */
 		if ((sc & BD_ENET_RX_LAST) == 0)
-			printk(KERN_WARNING DRV_MODULE_NAME
-			       ": %s rcv is not +last\n",
-			       dev->name);
+			dev_warn(fep->dev, "rcv is not +last\n");
 
 		/*
 		 * Check for errors.
@@ -178,9 +176,8 @@ static int fs_enet_rx_napi(struct napi_struct *napi, int budget)
 				received++;
 				netif_receive_skb(skb);
 			} else {
-				printk(KERN_WARNING DRV_MODULE_NAME
-				       ": %s Memory squeeze, dropping packet.\n",
-				       dev->name);
+				dev_warn(fep->dev,
+					 "Memory squeeze, dropping packet.\n");
 				fep->stats.rx_dropped++;
 				skbn = skb;
 			}
@@ -242,9 +239,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev)
 		 * the last indicator should be set.
 		 */
 		if ((sc & BD_ENET_RX_LAST) == 0)
-			printk(KERN_WARNING DRV_MODULE_NAME
-			       ": %s rcv is not +last\n",
-			       dev->name);
+			dev_warn(fep->dev, "rcv is not +last\n");
 
 		/*
 		 * Check for errors.
@@ -313,9 +308,8 @@ static int fs_enet_rx_non_napi(struct net_device *dev)
 				received++;
 				netif_rx(skb);
 			} else {
-				printk(KERN_WARNING DRV_MODULE_NAME
-				       ": %s Memory squeeze, dropping packet.\n",
-				       dev->name);
+				dev_warn(fep->dev,
+					 "Memory squeeze, dropping packet.\n");
 				fep->stats.rx_dropped++;
 				skbn = skb;
 			}
@@ -388,10 +382,10 @@ static void fs_enet_tx(struct net_device *dev)
 		} else
 			fep->stats.tx_packets++;
 
-		if (sc & BD_ENET_TX_READY)
-			printk(KERN_WARNING DRV_MODULE_NAME
-			       ": %s HEY! Enet xmit interrupt and TX_READY.\n",
-			       dev->name);
+		if (sc & BD_ENET_TX_READY) {
+			dev_warn(fep->dev,
+				 "HEY! Enet xmit interrupt and TX_READY.\n");
+		}
 
 		/*
 		 * Deferred means some collisions occurred during transmit,
@@ -511,9 +505,8 @@ void fs_init_bds(struct net_device *dev)
 	for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
 		skb = dev_alloc_skb(ENET_RX_FRSIZE);
 		if (skb == NULL) {
-			printk(KERN_WARNING DRV_MODULE_NAME
-			       ": %s Memory squeeze, unable to allocate skb\n",
-			       dev->name);
+			dev_warn(fep->dev,
+				 "Memory squeeze, unable to allocate skb\n");
 			break;
 		}
 		skb_align(skb, ENET_RX_ALIGN);
@@ -610,8 +603,7 @@ static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * Ooops.  All transmit buffers are full.  Bail out.
 		 * This should not happen, since the tx queue should be stopped.
 		 */
-		printk(KERN_WARNING DRV_MODULE_NAME
-		       ": %s tx queue full!.\n", dev->name);
+		dev_warn(fep->dev, "tx queue full!.\n");
 		return NETDEV_TX_BUSY;
 	}
 
@@ -788,8 +780,7 @@ static int fs_enet_open(struct net_device *dev)
 	r = request_irq(fep->interrupt, fs_enet_interrupt, IRQF_SHARED,
 			"fs_enet-mac", dev);
 	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s Could not allocate FS_ENET IRQ!", dev->name);
+		dev_err(fep->dev, "Could not allocate FS_ENET IRQ!");
 		if (fep->fpi->use_napi)
 			napi_disable(&fep->napi);
 		return -EINVAL;
@@ -1053,7 +1044,7 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
 	if (ret)
 		goto out_free_bd;
 
-	printk(KERN_INFO "%s: fs_enet: %pM\n", ndev->name, ndev->dev_addr);
+	pr_info("%s: fs_enet: %pM\n", ndev->name, ndev->dev_addr);
 
 	return 0;
 
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index a761d31e3d6d..cf4f674f9e2e 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -476,8 +476,9 @@ static void clear_int_events(struct net_device *dev, u32 int_events)
 
 static void ev_error(struct net_device *dev, u32 int_events)
 {
-	printk(KERN_WARNING DRV_MODULE_NAME
-	       ": %s FS_ENET ERROR(s) 0x%x\n", dev->name, int_events);
+	struct fs_enet_private *fep = netdev_priv(dev);
+
+	dev_warn(fep->dev, "FS_ENET ERROR(s) 0x%x\n", int_events);
 }
 
 static int get_regs(struct net_device *dev, void *p, int *sizep)
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index ca806d1ab3f6..8a632f668c1f 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -257,8 +257,7 @@ static void restart(struct net_device *dev)
 
 	r = whack_reset(fep->fec.fecp);
 	if (r != 0)
-		printk(KERN_ERR DRV_MODULE_NAME
-				": %s FEC Reset FAILED!\n", dev->name);
+		dev_err(fep->dev, "FEC Reset FAILED!\n");
 	/*
 	 * Set station address.
 	 */
@@ -355,9 +354,7 @@ static void stop(struct net_device *dev)
 		udelay(1);
 
 	if (i == FEC_RESET_DELAY)
-		printk(KERN_WARNING DRV_MODULE_NAME
-		       ": %s FEC timeout on graceful transmit stop\n",
-		       dev->name);
+		dev_warn(fep->dev, "FEC timeout on graceful transmit stop\n");
 	/*
 	 * Disable FEC. Let only MII interrupts.
 	 */
@@ -433,8 +430,9 @@ static void clear_int_events(struct net_device *dev, u32 int_events)
 
 static void ev_error(struct net_device *dev, u32 int_events)
 {
-	printk(KERN_WARNING DRV_MODULE_NAME
-	       ": %s FEC ERROR(s) 0x%x\n", dev->name, int_events);
+	struct fs_enet_private *fep = netdev_priv(dev);
+
+	dev_warn(fep->dev, "FEC ERROR(s) 0x%x\n", int_events);
 }
 
 static int get_regs(struct net_device *dev, void *p, int *sizep)
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 5bfc99b9475e..c490a466cae1 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -367,9 +367,7 @@ static void stop(struct net_device *dev)
 		udelay(1);
 
 	if (i == SCC_RESET_DELAY)
-		printk(KERN_WARNING DRV_MODULE_NAME
-		       ": %s SCC timeout on graceful transmit stop\n",
-		       dev->name);
+		dev_warn(fep->dev, "SCC timeout on graceful transmit stop\n");
 
 	W16(sccp, scc_sccm, 0);
 	C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
@@ -429,8 +427,9 @@ static void clear_int_events(struct net_device *dev, u32 int_events)
 
 static void ev_error(struct net_device *dev, u32 int_events)
 {
-	printk(KERN_WARNING DRV_MODULE_NAME
-	       ": %s SCC ERROR(s) 0x%x\n", dev->name, int_events);
+	struct fs_enet_private *fep = netdev_priv(dev);
+
+	dev_warn(fep->dev, "SCC ERROR(s) 0x%x\n", int_events);
 }
 
 static int get_regs(struct net_device *dev, void *p, int *sizep)
-- 
cgit v1.2.3


From 60ab4361adc188fb47da1c4892cc7a2bb621efef Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 26 Feb 2010 12:00:48 +0000
Subject: fs_enet: Add support for MPC512x to fs_enet driver

Extend the fs_enet driver to support MPC512x FEC.
Enable it with CONFIG_FS_ENET_MPC5121_FEC option.

Signed-off-by: John Rigby <jcrigby@gmail.com>
Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fs_enet/Kconfig        | 10 +++++---
 drivers/net/fs_enet/fs_enet-main.c |  7 ++++++
 drivers/net/fs_enet/fs_enet.h      | 49 +++++++++++++++++++++++++++++++++++++-
 drivers/net/fs_enet/mac-fec.c      | 46 +++++++++++++++++++++++------------
 drivers/net/fs_enet/mii-fec.c      |  4 ++--
 5 files changed, 95 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
index 562ea68ed99b..fc073b5a38c7 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/fs_enet/Kconfig
@@ -1,9 +1,13 @@
 config FS_ENET
        tristate "Freescale Ethernet Driver"
-       depends on CPM1 || CPM2
+       depends on CPM1 || CPM2 || PPC_MPC512x
        select MII
        select PHYLIB
 
+config FS_ENET_MPC5121_FEC
+	def_bool y if (FS_ENET && PPC_MPC512x)
+	select FS_ENET_HAS_FEC
+
 config FS_ENET_HAS_SCC
 	bool "Chip has an SCC usable for ethernet"
 	depends on FS_ENET && (CPM1 || CPM2)
@@ -16,13 +20,13 @@ config FS_ENET_HAS_FCC
 
 config FS_ENET_HAS_FEC
 	bool "Chip has an FEC usable for ethernet"
-	depends on FS_ENET && CPM1
+	depends on FS_ENET && (CPM1 || FS_ENET_MPC5121_FEC)
 	select FS_ENET_MDIO_FEC
 	default y
 
 config FS_ENET_MDIO_FEC
 	tristate "MDIO driver for FEC"
-	depends on FS_ENET && CPM1
+	depends on FS_ENET && (CPM1 || FS_ENET_MPC5121_FEC)
 
 config FS_ENET_MDIO_FCC
 	tristate "MDIO driver for FCC"
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index c34a7e0a28ed..4297021214d1 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1094,10 +1094,17 @@ static struct of_device_id fs_enet_match[] = {
 	},
 #endif
 #ifdef CONFIG_FS_ENET_HAS_FEC
+#ifdef CONFIG_FS_ENET_MPC5121_FEC
+	{
+		.compatible = "fsl,mpc5121-fec",
+		.data = (void *)&fs_fec_ops,
+	},
+#else
 	{
 		.compatible = "fsl,pq1-fec-enet",
 		.data = (void *)&fs_fec_ops,
 	},
+#endif
 #endif
 	{}
 };
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index ef01e09781a5..1ece4b1a689e 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -13,9 +13,56 @@
 
 #ifdef CONFIG_CPM1
 #include <asm/cpm1.h>
+#endif
+
+#if defined(CONFIG_FS_ENET_HAS_FEC)
+#include <asm/cpm.h>
+
+#if defined(CONFIG_FS_ENET_MPC5121_FEC)
+/* MPC5121 FEC has different register layout */
+struct fec {
+	u32 fec_reserved0;
+	u32 fec_ievent;			/* Interrupt event reg */
+	u32 fec_imask;			/* Interrupt mask reg */
+	u32 fec_reserved1;
+	u32 fec_r_des_active;		/* Receive descriptor reg */
+	u32 fec_x_des_active;		/* Transmit descriptor reg */
+	u32 fec_reserved2[3];
+	u32 fec_ecntrl;			/* Ethernet control reg */
+	u32 fec_reserved3[6];
+	u32 fec_mii_data;		/* MII manage frame reg */
+	u32 fec_mii_speed;		/* MII speed control reg */
+	u32 fec_reserved4[7];
+	u32 fec_mib_ctrlstat;		/* MIB control/status reg */
+	u32 fec_reserved5[7];
+	u32 fec_r_cntrl;		/* Receive control reg */
+	u32 fec_reserved6[15];
+	u32 fec_x_cntrl;		/* Transmit Control reg */
+	u32 fec_reserved7[7];
+	u32 fec_addr_low;		/* Low 32bits MAC address */
+	u32 fec_addr_high;		/* High 16bits MAC address */
+	u32 fec_opd;			/* Opcode + Pause duration */
+	u32 fec_reserved8[10];
+	u32 fec_hash_table_high;	/* High 32bits hash table */
+	u32 fec_hash_table_low;		/* Low 32bits hash table */
+	u32 fec_grp_hash_table_high;	/* High 32bits hash table */
+	u32 fec_grp_hash_table_low;	/* Low 32bits hash table */
+	u32 fec_reserved9[7];
+	u32 fec_x_wmrk;			/* FIFO transmit water mark */
+	u32 fec_reserved10;
+	u32 fec_r_bound;		/* FIFO receive bound reg */
+	u32 fec_r_fstart;		/* FIFO receive start reg */
+	u32 fec_reserved11[11];
+	u32 fec_r_des_start;		/* Receive descriptor ring */
+	u32 fec_x_des_start;		/* Transmit descriptor ring */
+	u32 fec_r_buff_size;		/* Maximum receive buff size */
+	u32 fec_reserved12[26];
+	u32 fec_dma_control;		/* DMA Endian and other ctrl */
+};
+#endif
 
 struct fec_info {
-	fec_t __iomem *fecp;
+	struct fec __iomem *fecp;
 	u32 mii_speed;
 };
 #endif
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 8a632f668c1f..cd2c6cca5f24 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -80,7 +80,7 @@
  */
 #define FEC_RESET_DELAY		50
 
-static int whack_reset(fec_t __iomem *fecp)
+static int whack_reset(struct fec __iomem *fecp)
 {
 	int i;
 
@@ -168,7 +168,7 @@ static void cleanup_data(struct net_device *dev)
 static void set_promiscuous_mode(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FS(fecp, r_cntrl, FEC_RCNTRL_PROM);
 }
@@ -216,7 +216,7 @@ static void set_multicast_one(struct net_device *dev, const u8 *mac)
 static void set_multicast_finish(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	/* if all multi or too many multicasts; just enable all */
 	if ((dev->flags & IFF_ALLMULTI) != 0 ||
@@ -246,7 +246,7 @@ static void set_multicast_list(struct net_device *dev)
 static void restart(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 	const struct fs_platform_info *fpi = fep->fpi;
 	dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
 	int r;
@@ -280,7 +280,11 @@ static void restart(struct net_device *dev)
 	 * Set maximum receive buffer size.
 	 */
 	FW(fecp, r_buff_size, PKT_MAXBLR_SIZE);
+#ifdef CONFIG_FS_ENET_MPC5121_FEC
+	FW(fecp, r_cntrl, PKT_MAXBUF_SIZE << 16);
+#else
 	FW(fecp, r_hash, PKT_MAXBUF_SIZE);
+#endif
 
 	/* get physical address */
 	rx_bd_base_phys = fep->ring_mem_addr;
@@ -297,7 +301,11 @@ static void restart(struct net_device *dev)
 	/*
 	 * Enable big endian and don't care about SDMA FC.
 	 */
+#ifdef CONFIG_FS_ENET_MPC5121_FEC
+	FS(fecp, dma_control, 0xC0000000);
+#else
 	FW(fecp, fun_code, 0x78000000);
+#endif
 
 	/*
 	 * Set MII speed.
@@ -308,9 +316,17 @@ static void restart(struct net_device *dev)
 	 * Clear any outstanding interrupt.
 	 */
 	FW(fecp, ievent, 0xffc0);
+#ifndef CONFIG_FS_ENET_MPC5121_FEC
 	FW(fecp, ivec, (virq_to_hw(fep->interrupt) / 2) << 29);
 
 	FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE);	/* MII enable */
+#else
+	/*
+	 * Only set MII mode - do not touch maximum frame length
+	 * configured before.
+	 */
+	FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE);
+#endif
 	/*
 	 * adjust to duplex mode
 	 */
@@ -339,7 +355,7 @@ static void stop(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
 	const struct fs_platform_info *fpi = fep->fpi;
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	struct fec_info* feci= fep->phydev->bus->priv;
 
@@ -375,7 +391,7 @@ static void stop(struct net_device *dev)
 static void napi_clear_rx_event(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FW(fecp, ievent, FEC_NAPI_RX_EVENT_MSK);
 }
@@ -383,7 +399,7 @@ static void napi_clear_rx_event(struct net_device *dev)
 static void napi_enable_rx(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FS(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
 }
@@ -391,7 +407,7 @@ static void napi_enable_rx(struct net_device *dev)
 static void napi_disable_rx(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FC(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
 }
@@ -399,7 +415,7 @@ static void napi_disable_rx(struct net_device *dev)
 static void rx_bd_done(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FW(fecp, r_des_active, 0x01000000);
 }
@@ -407,7 +423,7 @@ static void rx_bd_done(struct net_device *dev)
 static void tx_kickstart(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FW(fecp, x_des_active, 0x01000000);
 }
@@ -415,7 +431,7 @@ static void tx_kickstart(struct net_device *dev)
 static u32 get_int_events(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	return FR(fecp, ievent) & FR(fecp, imask);
 }
@@ -423,7 +439,7 @@ static u32 get_int_events(struct net_device *dev)
 static void clear_int_events(struct net_device *dev, u32 int_events)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-	fec_t __iomem *fecp = fep->fec.fecp;
+	struct fec __iomem *fecp = fep->fec.fecp;
 
 	FW(fecp, ievent, int_events);
 }
@@ -439,17 +455,17 @@ static int get_regs(struct net_device *dev, void *p, int *sizep)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
 
-	if (*sizep < sizeof(fec_t))
+	if (*sizep < sizeof(struct fec))
 		return -EINVAL;
 
-	memcpy_fromio(p, fep->fec.fecp, sizeof(fec_t));
+	memcpy_fromio(p, fep->fec.fecp, sizeof(struct fec));
 
 	return 0;
 }
 
 static int get_regs_len(struct net_device *dev)
 {
-	return sizeof(fec_t);
+	return sizeof(struct fec);
 }
 
 static void tx_restart(struct net_device *dev)
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 96eba4280c5c..5944b65082cb 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -52,7 +52,7 @@
 static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location)
 {
 	struct fec_info* fec = bus->priv;
-	fec_t __iomem *fecp = fec->fecp;
+	struct fec __iomem *fecp = fec->fecp;
 	int i, ret = -1;
 
 	BUG_ON((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0);
@@ -75,7 +75,7 @@ static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location)
 static int fs_enet_fec_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val)
 {
 	struct fec_info* fec = bus->priv;
-	fec_t __iomem *fecp = fec->fecp;
+	struct fec __iomem *fecp = fec->fecp;
 	int i;
 
 	/* this must never happen */
-- 
cgit v1.2.3


From cb395eaf439625f26c8527bb05bb905774a54c36 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 26 Feb 2010 12:00:49 +0000
Subject: fs_enet: add FEC TX buffer alignment workaround for MPC5121

MPC5121 FEC requeries 4-byte alignmnent for TX data buffers.
This patch is a work around that copies misaligned tx packets
to an aligned skb before sending.

Signed-off-by: John Rigby <jcrigby@gmail.com>
Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fs_enet/fs_enet-main.c | 47 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 4297021214d1..0770e2f6da6b 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -580,6 +580,40 @@ void fs_cleanup_bds(struct net_device *dev)
 
 /**********************************************************************************/
 
+#ifdef CONFIG_FS_ENET_MPC5121_FEC
+/*
+ * MPC5121 FEC requeries 4-byte alignment for TX data buffer!
+ */
+static struct sk_buff *tx_skb_align_workaround(struct net_device *dev,
+					       struct sk_buff *skb)
+{
+	struct sk_buff *new_skb;
+	struct fs_enet_private *fep = netdev_priv(dev);
+
+	/* Alloc new skb */
+	new_skb = dev_alloc_skb(skb->len + 4);
+	if (!new_skb) {
+		if (net_ratelimit()) {
+			dev_warn(fep->dev,
+				 "Memory squeeze, dropping tx packet.\n");
+		}
+		return NULL;
+	}
+
+	/* Make sure new skb is properly aligned */
+	skb_align(new_skb, 4);
+
+	/* Copy data to new skb ... */
+	skb_copy_from_linear_data(skb, new_skb->data, skb->len);
+	skb_put(new_skb, skb->len);
+
+	/* ... and free an old one */
+	dev_kfree_skb_any(skb);
+
+	return new_skb;
+}
+#endif
+
 static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
@@ -588,6 +622,19 @@ static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u16 sc;
 	unsigned long flags;
 
+#ifdef CONFIG_FS_ENET_MPC5121_FEC
+	if (((unsigned long)skb->data) & 0x3) {
+		skb = tx_skb_align_workaround(dev, skb);
+		if (!skb) {
+			/*
+			 * We have lost packet due to memory allocation error
+			 * in tx_skb_align_workaround(). Hopefully original
+			 * skb is still valid, so try transmit it later.
+			 */
+			return NETDEV_TX_BUSY;
+		}
+	}
+#endif
 	spin_lock_irqsave(&fep->tx_lock, flags);
 
 	/*
-- 
cgit v1.2.3


From 3729d5021257b283f7fce33d957893162ccb2c9d Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Fri, 26 Feb 2010 06:34:54 +0000
Subject: rtnetlink: support specifying device flags on device creation

commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f
Author: Patrick McHardy <kaber@trash.net>
Date:   Tue Feb 23 20:41:30 2010 +0100

Support specifying the initial device flags when creating a device though
rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING
in order to surpress netlink registration notifications. To complete setup,
rtnl_configure_link() must be called, which performs the device flag changes
and invokes the deferred notifiers if everything went well.

Two examples:

# add macvlan to eth0
#
$ ip link add link eth0 up allmulticast on type macvlan

[LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
    link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff
[ROUTE]ff00::/8 dev macvlan0  table local  metric 256  mtu 1500 advmss 1440 hoplimit 0
[ROUTE]fe80::/64 dev macvlan0  proto kernel  metric 256  mtu 1500 advmss 1440 hoplimit 0
[LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500
    link/ether 26:f8:84:02:f9:2a
[ADDR]11: macvlan0    inet6 fe80::24f8:84ff:fe02:f92a/64 scope link
       valid_lft forever preferred_lft forever
[ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo  table local  proto none  metric 0  mtu 16436 advmss 16376 hoplimit 0
[ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0  proto kernel  metric 1024  mtu 1500 advmss 1440 hoplimit 0
[NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE
[ROUTE]2001:6f8:974::/64 dev macvlan0  proto kernel  metric 256  expires 0sec mtu 1500 advmss 1440 hoplimit 0
[PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084
[ADDR]11: macvlan0    inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic
       valid_lft 86399sec preferred_lft 14399sec

# add VLAN to eth1, eth1 is down
#
$ ip link add link eth1 up type vlan id 1000
RTNETLINK answers: Network is down

<no events>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/veth.c      | 15 +++++++++-----
 include/net/rtnetlink.h |  2 ++
 net/core/rtnetlink.c    | 52 ++++++++++++++++++++++++++++++++++++++++---------
 3 files changed, 55 insertions(+), 14 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 35609e64f6fd..b583d4968add 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -333,19 +333,17 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 	struct veth_priv *priv;
 	char ifname[IFNAMSIZ];
 	struct nlattr *peer_tb[IFLA_MAX + 1], **tbp;
+	struct ifinfomsg *ifmp;
 	struct net *net;
 
 	/*
 	 * create and register peer first
-	 *
-	 * struct ifinfomsg is at the head of VETH_INFO_PEER, but we
-	 * skip it since no info from it is useful yet
 	 */
-
 	if (data != NULL && data[VETH_INFO_PEER] != NULL) {
 		struct nlattr *nla_peer;
 
 		nla_peer = data[VETH_INFO_PEER];
+		ifmp = nla_data(nla_peer);
 		err = nla_parse(peer_tb, IFLA_MAX,
 				nla_data(nla_peer) + sizeof(struct ifinfomsg),
 				nla_len(nla_peer) - sizeof(struct ifinfomsg),
@@ -358,8 +356,10 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 			return err;
 
 		tbp = peer_tb;
-	} else
+	} else {
+		ifmp = NULL;
 		tbp = tb;
+	}
 
 	if (tbp[IFLA_IFNAME])
 		nla_strlcpy(ifname, tbp[IFLA_IFNAME], IFNAMSIZ);
@@ -387,6 +387,10 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 
 	netif_carrier_off(peer);
 
+	err = rtnl_configure_link(peer, ifmp);
+	if (err < 0)
+		goto err_configure_peer;
+
 	/*
 	 * register dev last
 	 *
@@ -428,6 +432,7 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 err_register_dev:
 	/* nothing to do */
 err_alloc_name:
+err_configure_peer:
 	unregister_netdevice(peer);
 	return err;
 
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
index 48d3efcb0880..af60fd050844 100644
--- a/include/net/rtnetlink.h
+++ b/include/net/rtnetlink.h
@@ -87,6 +87,8 @@ extern void	rtnl_link_unregister(struct rtnl_link_ops *ops);
 extern struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]);
 extern struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
 	char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[]);
+extern int rtnl_configure_link(struct net_device *dev,
+			       const struct ifinfomsg *ifm);
 extern const struct nla_policy ifla_policy[IFLA_MAX+1];
 
 #define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index c21ec4236dd0..d1472a423323 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -549,6 +549,19 @@ static void set_operstate(struct net_device *dev, unsigned char transition)
 	}
 }
 
+static unsigned int rtnl_dev_combine_flags(const struct net_device *dev,
+					   const struct ifinfomsg *ifm)
+{
+	unsigned int flags = ifm->ifi_flags;
+
+	/* bugwards compatibility: ifi_change == 0 is treated as ~0 */
+	if (ifm->ifi_change)
+		flags = (flags & ifm->ifi_change) |
+			(dev->flags & ~ifm->ifi_change);
+
+	return flags;
+}
+
 static void copy_rtnl_link_stats(struct rtnl_link_stats *a,
 				 const struct net_device_stats *b)
 {
@@ -904,13 +917,7 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm,
 	}
 
 	if (ifm->ifi_flags || ifm->ifi_change) {
-		unsigned int flags = ifm->ifi_flags;
-
-		/* bugwards compatibility: ifi_change == 0 is treated as ~0 */
-		if (ifm->ifi_change)
-			flags = (flags & ifm->ifi_change) |
-				(dev->flags & ~ifm->ifi_change);
-		err = dev_change_flags(dev, flags);
+		err = dev_change_flags(dev, rtnl_dev_combine_flags(dev, ifm));
 		if (err < 0)
 			goto errout;
 	}
@@ -1053,6 +1060,26 @@ static int rtnl_dellink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 	return 0;
 }
 
+int rtnl_configure_link(struct net_device *dev, const struct ifinfomsg *ifm)
+{
+	unsigned int old_flags;
+	int err;
+
+	old_flags = dev->flags;
+	if (ifm && (ifm->ifi_flags || ifm->ifi_change)) {
+		err = __dev_change_flags(dev, rtnl_dev_combine_flags(dev, ifm));
+		if (err < 0)
+			return err;
+	}
+
+	dev->rtnl_link_state = RTNL_LINK_INITIALIZED;
+	rtmsg_ifinfo(RTM_NEWLINK, dev, ~0U);
+
+	__dev_notify_flags(dev, old_flags);
+	return 0;
+}
+EXPORT_SYMBOL(rtnl_configure_link);
+
 struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
 	char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[])
 {
@@ -1074,6 +1101,7 @@ struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
 
 	dev_net_set(dev, net);
 	dev->rtnl_link_ops = ops;
+	dev->rtnl_link_state = RTNL_LINK_INITIALIZING;
 	dev->real_num_tx_queues = real_num_queues;
 
 	if (strchr(dev->name, '%')) {
@@ -1203,7 +1231,7 @@ replay:
 		if (!(nlh->nlmsg_flags & NLM_F_CREATE))
 			return -ENODEV;
 
-		if (ifm->ifi_index || ifm->ifi_flags || ifm->ifi_change)
+		if (ifm->ifi_index)
 			return -EOPNOTSUPP;
 		if (tb[IFLA_MAP] || tb[IFLA_MASTER] || tb[IFLA_PROTINFO])
 			return -EOPNOTSUPP;
@@ -1234,9 +1262,15 @@ replay:
 			err = ops->newlink(net, dev, tb, data);
 		else
 			err = register_netdevice(dev);
-		if (err < 0 && !IS_ERR(dev))
+		if (err < 0 && !IS_ERR(dev)) {
 			free_netdev(dev);
+			goto out;
+		}
 
+		err = rtnl_configure_link(dev, ifm);
+		if (err < 0)
+			unregister_netdevice(dev);
+out:
 		put_net(dest_net);
 		return err;
 	}
-- 
cgit v1.2.3


From 8d6184e4881b423522136aeb3ec1cbd9c35e8813 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Sat, 27 Feb 2010 02:52:05 -0800
Subject: bonding: fix device leak on error in bond_create()

When the register_netdevice() call fails, the newly allocated device is
not freed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 1787e3c86573..430c02267d7e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4946,6 +4946,8 @@ int bond_create(struct net *net, const char *name)
 	}
 
 	res = register_netdevice(bond_dev);
+	if (res < 0)
+		goto out_netdev;
 
 out:
 	rtnl_unlock();
-- 
cgit v1.2.3


From 2ea186ae533c7b4f4c56811b69d3e40a6209a9c0 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.r.fastabend@intel.com>
Date: Sat, 27 Feb 2010 03:28:24 -0800
Subject: ixgbe: move TC_PRIO_CONTROL check into ixgbe_select_queue()

Move TC_PRIO_CONTROL check and queue remapping into
ixgbe_select_queue().  Remapping queues after the qdisc
can result in the wrong qdisc queue being stopped with
netif_stop_subqueue().  Even if this is resolved and the
correct queue is stopped it can result in a queue being
blocked by TC_PRIO_CONTROL frames uneccesarily.  Moving
this into the select_queue routine maintains alignment
between tx_rings and qdisc queues.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe_main.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a961da2f98c0..45e3532b166f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5639,8 +5639,14 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 		return txq;
 	}
 #endif
-	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
-		return (skb->vlan_tci & IXGBE_TX_FLAGS_VLAN_PRIO_MASK) >> 13;
+	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		if (skb->priority == TC_PRIO_CONTROL)
+			txq = adapter->ring_feature[RING_F_DCB].indices-1;
+		else
+			txq = (skb->vlan_tci & IXGBE_TX_FLAGS_VLAN_PRIO_MASK)
+			       >> 13;
+		return txq;
+	}
 
 	return skb_tx_hash(dev, skb);
 }
@@ -5667,14 +5673,9 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
 		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		if (skb->priority != TC_PRIO_CONTROL) {
-			tx_flags |= ((skb->queue_mapping & 0x7) << 13);
-			tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
-			tx_flags |= IXGBE_TX_FLAGS_VLAN;
-		} else {
-			skb->queue_mapping =
-				adapter->ring_feature[RING_F_DCB].indices-1;
-		}
+		tx_flags |= ((skb->queue_mapping & 0x7) << 13);
+		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	}
 
 	tx_ring = adapter->tx_ring[skb->queue_mapping];
-- 
cgit v1.2.3


From 9bdcf336d0c061e77f4c45c7b2bc32e3ed6b57e3 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Sun, 4 Oct 2009 14:55:24 +0200
Subject: MIPS: Alchemy: devboard register abstraction

All Alchemy development boards have external CPLDs with a few registers
in them.  They all share an identical register layout with only a few
minor differences (except the PB1000) in bit functions and base
addresses.

This patch
- adds a primitive facility to initialize and use these external
  registers,
- replaces all occurrences of bcsr->xxx accesses with calls to the new
  functions (the pb1200 cascade irq handling code is special).
- collects BCSR register information scattered throughout the board
  headers in a central place.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/devboards/Makefile             |   2 +-
 arch/mips/alchemy/devboards/bcsr.c               |  76 ++++++++
 arch/mips/alchemy/devboards/db1x00/board_setup.c |  62 +++---
 arch/mips/alchemy/devboards/pb1100/board_setup.c |   7 +-
 arch/mips/alchemy/devboards/pb1200/board_setup.c |  49 +++--
 arch/mips/alchemy/devboards/pb1200/irqmap.c      |  42 ++--
 arch/mips/alchemy/devboards/pb1200/platform.c    |  25 +--
 arch/mips/alchemy/devboards/pb1500/board_setup.c |   7 +-
 arch/mips/alchemy/devboards/pb1550/board_setup.c |  11 +-
 arch/mips/include/asm/mach-db1x00/bcsr.h         | 235 +++++++++++++++++++++++
 arch/mips/include/asm/mach-db1x00/db1200.h       | 109 +----------
 arch/mips/include/asm/mach-db1x00/db1x00.h       |  92 ---------
 arch/mips/include/asm/mach-pb1x00/pb1100.h       |  49 -----
 arch/mips/include/asm/mach-pb1x00/pb1200.h       | 109 +----------
 arch/mips/include/asm/mach-pb1x00/pb1500.h       |  13 --
 arch/mips/include/asm/mach-pb1x00/pb1550.h       |  89 ---------
 drivers/mtd/nand/au1550nd.c                      |   4 +-
 drivers/net/irda/au1k_ir.c                       |  14 +-
 drivers/pcmcia/au1000_db1x00.c                   |  76 ++++----
 19 files changed, 475 insertions(+), 596 deletions(-)
 create mode 100644 arch/mips/alchemy/devboards/bcsr.c
 create mode 100644 arch/mips/include/asm/mach-db1x00/bcsr.h

(limited to 'drivers/net')

diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 730f9f2b30e8..adc6717d7688 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -2,7 +2,7 @@
 # Alchemy Develboards
 #
 
-obj-y += prom.o
+obj-y += prom.o bcsr.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
 obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
new file mode 100644
index 000000000000..85b7715901af
--- /dev/null
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -0,0 +1,76 @@
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address.
+ * All registers are 16bits wide with 32bit spacing.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static struct bcsr_reg {
+	void __iomem *raddr;
+	spinlock_t lock;
+} bcsr_regs[BCSR_CNT];
+
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)
+{
+	int i;
+
+	bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys));
+	bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys));
+
+	for (i = 0; i < BCSR_CNT; i++) {
+		if (i >= BCSR_HEXLEDS)
+			bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys +
+					(0x04 * (i - BCSR_HEXLEDS));
+		else
+			bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys +
+					(0x04 * i);
+
+		spin_lock_init(&bcsr_regs[i].lock);
+	}
+}
+
+unsigned short bcsr_read(enum bcsr_id reg)
+{
+	unsigned short r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	r = __raw_readw(bcsr_regs[reg].raddr);
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+	return r;
+}
+EXPORT_SYMBOL_GPL(bcsr_read);
+
+void bcsr_write(enum bcsr_id reg, unsigned short val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	__raw_writew(val, bcsr_regs[reg].raddr);
+	wmb();
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_write);
+
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set)
+{
+	unsigned short r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	r = __raw_readw(bcsr_regs[reg].raddr);
+	r &= ~clr;
+	r |= set;
+	__raw_writew(r, bcsr_regs[reg].raddr);
+	wmb();
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_mod);
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index de30d8ea7176..e713390c69e6 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,12 +32,10 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
 const char *get_system_type(void)
 {
 #ifdef CONFIG_MIPS_BOSPORUS
@@ -49,15 +47,43 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.SW_RESET[RESET] */
-	bcsr->swreset = 0x0000;
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_setup(void)
 {
+	unsigned long bcsr1, bcsr2;
 	u32 pin_func = 0;
 	char *argptr;
 
+	bcsr1 = DB1000_BCSR_PHYS_ADDR;
+	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
+
+#ifdef CONFIG_MIPS_DB1000
+	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1100
+	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+#ifdef CONFIG_MIPS_BOSPORUS
+	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
+#endif
+#ifdef CONFIG_MIPS_MIRAGE
+	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1550
+	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
+
+	bcsr1 = DB1550_BCSR_PHYS_ADDR;
+	bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
+#endif
+
+	/* initialize board register space */
+	bcsr_init(bcsr1, bcsr2);
+
 	argptr = prom_getcmdline();
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	argptr = strstr(argptr, "console=");
@@ -89,11 +115,10 @@ void __init board_setup(void)
 	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
 	au_writel(pin_func, SYS_PINFUNC);
 	/* Power off until the driver is in use */
-	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-	bcsr->resets |=  BCSR_RESETS_IRDA_MODE_OFF;
-	au_sync();
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+				BCSR_RESETS_IRDA_MODE_OFF);
 #endif
-	bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
 	/* Enable GPIO[31:0] inputs */
 	alchemy_gpio1_input_enable();
@@ -123,23 +148,4 @@ void __init board_setup(void)
 #endif
 
 	au_sync();
-
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
-#endif
-#ifdef CONFIG_MIPS_BOSPORUS
-	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
-#endif
-#ifdef CONFIG_MIPS_MIRAGE
-	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
-	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
-#endif
 }
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index 61263081ef58..eb749fb9daa1 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -30,6 +30,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1100.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
@@ -49,8 +50,7 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
-	au_writel(0x00000000, PB1100_RST_VDDI);
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_init_irq(void)
@@ -63,6 +63,9 @@ void __init board_setup(void)
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
 	char *argptr;
 
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
 	argptr = prom_getcmdline();
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	argptr = strstr(argptr, "console=");
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 94e6b7e7753d..db563800c31d 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -27,6 +27,8 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 
+#include <asm/mach-db1x00/bcsr.h>
+
 #include <prom.h>
 #include <au1xxx.h>
 
@@ -38,14 +40,25 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	bcsr->resets = 0;
-	bcsr->system = 0;
+	bcsr_write(BCSR_RESETS, 0);
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_setup(void)
 {
 	char *argptr;
 
+#ifdef CONFIG_MIPS_PB1200
+	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+#endif
+
 	argptr = prom_getcmdline();
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	argptr = strstr(argptr, "console=");
@@ -82,7 +95,7 @@ void __init board_setup(void)
 		u32 pin_func;
 
 		/* Select SMBus in CPLD */
-		bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 
 		pin_func = au_readl(SYS_PINFUNC);
 		au_sync();
@@ -116,38 +129,24 @@ void __init board_setup(void)
 
 	/*
 	 * The Pb1200 development board uses external MUX for PSC0 to
-	 * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
 	 */
 #ifdef CONFIG_I2C_AU1550
-	bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 #endif
 	au_sync();
-
-#ifdef CONFIG_MIPS_PB1200
-	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
-#endif
 }
 
 int board_au1200fb_panel(void)
 {
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-	int p;
-
-	p = bcsr->switches;
-	p >>= 8;
-	p &= 0x0F;
-	return p;
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
 }
 
 int board_au1200fb_panel_init(void)
 {
 	/* Apply power */
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-	bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
 	/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
 	return 0;
 }
@@ -155,10 +154,8 @@ int board_au1200fb_panel_init(void)
 int board_au1200fb_panel_shutdown(void)
 {
 	/* Remove power */
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			 BCSR_BOARD_LCDBL);
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
 	/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
 	return 0;
 }
diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
index fe47498da280..f379b02213f1 100644
--- a/arch/mips/alchemy/devboards/pb1200/irqmap.c
+++ b/arch/mips/alchemy/devboards/pb1200/irqmap.c
@@ -38,11 +38,14 @@
 #define PB1200_INT_END DB1200_INT_END
 #endif
 
+#include <asm/mach-db1x00/bcsr.h>
+
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	/* This is external interrupt cascade */
 	{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
 };
 
+static void __iomem *bcsr_virt;
 
 /*
  * Support for External interrupts on the Pb1200 Development platform.
@@ -50,7 +53,7 @@ struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 
 static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
 {
-	unsigned short bisr = bcsr->int_status;
+	unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
 
 	for ( ; bisr; bisr &= bisr - 1)
 		generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
@@ -61,24 +64,27 @@ static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
  */
 static void pb1200_mask_irq(unsigned int irq_nr)
 {
-	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
-	au_sync();
+	unsigned short v = 1 << (irq_nr - PB1200_INT_BEGIN);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+	wmb();
 }
 
 static void pb1200_maskack_irq(unsigned int irq_nr)
 {
-	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN);	/* ack */
-	au_sync();
+	unsigned short v = 1 << (irq_nr - PB1200_INT_BEGIN);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT);	/* ack */
+	wmb();
 }
 
 static void pb1200_unmask_irq(unsigned int irq_nr)
 {
-	bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	au_sync();
+	unsigned short v = 1 << (irq_nr - PB1200_INT_BEGIN);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
+	wmb();
 }
 
 static struct irq_chip pb1200_cpld_irq_type = {
@@ -100,8 +106,10 @@ void __init board_init_irq(void)
 	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
 
 #ifdef CONFIG_MIPS_PB1200
+	bcsr_virt = (void __iomem *)KSEG1ADDR(PB1200_BCSR_PHYS_ADDR);
+
 	/* We have a problem with CPLD rev 3. */
-	if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
 		printk(KERN_ERR "WARNING!!!\n");
 		printk(KERN_ERR "WARNING!!!\n");
 		printk(KERN_ERR "WARNING!!!\n");
@@ -119,12 +127,14 @@ void __init board_init_irq(void)
 		printk(KERN_ERR "WARNING!!!\n");
 		panic("Game over.  Your score is 0.");
 	}
+#else
+	bcsr_virt = (void __iomem *)KSEG1ADDR(DB1200_BCSR_PHYS_ADDR);
 #endif
+
 	/* mask & disable & ack all */
-	bcsr->intclr_mask = 0xffff;
-	bcsr->intclr = 0xffff;
-	bcsr->int_status = 0xffff;
-	au_sync();
+	bcsr_write(BCSR_INTCLR, 0xffff);
+	bcsr_write(BCSR_MASKCLR, 0xffff);
+	bcsr_write(BCSR_INTSTAT, 0xffff);
 
 	for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
 		set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index b93dff4a6789..dfdaabf77909 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -26,27 +26,28 @@
 
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 static int mmc_activity;
 
 static void pb1200mmc0_set_power(void *mmc_host, int state)
 {
 	if (state)
-		bcsr->board |= BCSR_BOARD_SD0PWR;
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
 	else
-		bcsr->board &= ~BCSR_BOARD_SD0PWR;
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
 
-	au_sync_delay(1);
+	msleep(1);
 }
 
 static int pb1200mmc0_card_readonly(void *mmc_host)
 {
-	return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
 }
 
 static int pb1200mmc0_card_inserted(void *mmc_host)
 {
-	return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
 }
 
 static void pb1200_mmcled_set(struct led_classdev *led,
@@ -54,10 +55,10 @@ static void pb1200_mmcled_set(struct led_classdev *led,
 {
 	if (brightness != LED_OFF) {
 		if (++mmc_activity == 1)
-			bcsr->disk_leds &= ~(1 << 8);
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 	} else {
 		if (--mmc_activity == 0)
-			bcsr->disk_leds |= (1 << 8);
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 	}
 }
 
@@ -69,21 +70,21 @@ static struct led_classdev pb1200mmc_led = {
 static void pb1200mmc1_set_power(void *mmc_host, int state)
 {
 	if (state)
-		bcsr->board |= BCSR_BOARD_SD1PWR;
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
 	else
-		bcsr->board &= ~BCSR_BOARD_SD1PWR;
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
 
-	au_sync_delay(1);
+	msleep(1);
 }
 
 static int pb1200mmc1_card_readonly(void *mmc_host)
 {
-	return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
 }
 
 static int pb1200mmc1_card_inserted(void *mmc_host)
 {
-	return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
 }
 #endif
 
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index d7a56569e7ed..c5389e5afb93 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -30,6 +30,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1500.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
@@ -55,8 +56,7 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
-	au_writel(0x00000000, PB1500_RST_VDDI);
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_init_irq(void)
@@ -70,6 +70,9 @@ void __init board_setup(void)
 	u32 sys_freqctrl, sys_clksrc;
 	char *argptr;
 
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
 	argptr = prom_getcmdline();
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	argptr = strstr(argptr, "console=");
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index b6e9e7d247a3..af7a1b5fe7c7 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -32,6 +32,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
@@ -53,8 +54,7 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.SYSTEM[RESET] */
-	au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_init_irq(void)
@@ -66,6 +66,10 @@ void __init board_setup(void)
 {
 	u32 pin_func;
 
+	bcsr_init(PB1550_BCSR_PHYS_ADDR,
+		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	char *argptr;
 	argptr = prom_getcmdline();
@@ -85,8 +89,7 @@ void __init board_setup(void)
 	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
 	au_writel(pin_func, SYS_PINFUNC);
 
-	au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
-	au_sync();
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
 	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
 }
diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h
new file mode 100644
index 000000000000..ecbe19e3c14e
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/bcsr.h
@@ -0,0 +1,235 @@
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address and bit meanings in the RESETS and BOARD
+ * registers.
+ *
+ * All data taken from the official AMD board documentation sheets.
+ */
+
+#ifndef _DB1XXX_BCSR_H_
+#define _DB1XXX_BCSR_H_
+
+
+/* BCSR base addresses on various boards. BCSR base 2 refers to the
+ * physical address of the first HEXLEDS register, which is usually
+ * a variable offset from the WHOAMI register.
+ */
+
+/* DB1000, DB1100, DB1500, PB1100, PB1500 */
+#define DB1000_BCSR_PHYS_ADDR	0x0E000000
+#define DB1000_BCSR_HEXLED_OFS	0x01000000
+
+#define DB1550_BCSR_PHYS_ADDR	0x0F000000
+#define DB1550_BCSR_HEXLED_OFS	0x00400000
+
+#define PB1550_BCSR_PHYS_ADDR	0x0F000000
+#define PB1550_BCSR_HEXLED_OFS	0x00800000
+
+#define DB1200_BCSR_PHYS_ADDR	0x19800000
+#define DB1200_BCSR_HEXLED_OFS	0x00400000
+
+#define PB1200_BCSR_PHYS_ADDR	0x0D800000
+#define PB1200_BCSR_HEXLED_OFS	0x00400000
+
+
+enum bcsr_id {
+	/* BCSR base 1 */
+	BCSR_WHOAMI	= 0,
+	BCSR_STATUS,
+	BCSR_SWITCHES,
+	BCSR_RESETS,
+	BCSR_PCMCIA,
+	BCSR_BOARD,
+	BCSR_LEDS,
+	BCSR_SYSTEM,
+	/* Au1200/1300 based boards */
+	BCSR_INTCLR,
+	BCSR_INTSET,
+	BCSR_MASKCLR,
+	BCSR_MASKSET,
+	BCSR_SIGSTAT,
+	BCSR_INTSTAT,
+
+	/* BCSR base 2 */
+	BCSR_HEXLEDS,
+	BCSR_RSVD1,
+	BCSR_HEXCLEAR,
+
+	BCSR_CNT,
+};
+
+/* register offsets, valid for all Db1xxx/Pb1xxx boards */
+#define BCSR_REG_WHOAMI		0x00
+#define BCSR_REG_STATUS		0x04
+#define BCSR_REG_SWITCHES	0x08
+#define BCSR_REG_RESETS		0x0c
+#define BCSR_REG_PCMCIA		0x10
+#define BCSR_REG_BOARD		0x14
+#define BCSR_REG_LEDS		0x18
+#define BCSR_REG_SYSTEM		0x1c
+/* Au1200/Au1300 based boards: CPLD IRQ muxer */
+#define BCSR_REG_INTCLR		0x20
+#define BCSR_REG_INTSET		0x24
+#define BCSR_REG_MASKCLR	0x28
+#define BCSR_REG_MASKSET	0x2c
+#define BCSR_REG_SIGSTAT	0x30
+#define BCSR_REG_INTSTAT	0x34
+
+/* hexled control, offset from BCSR base 2 */
+#define BCSR_REG_HEXLEDS	0x00
+#define BCSR_REG_HEXCLEAR	0x08
+
+/*
+ * Register Bits and Pieces.
+ */
+#define BCSR_WHOAMI_DCID(x)		((x) & 0xf)
+#define BCSR_WHOAMI_CPLD(x)		(((x) >> 4) & 0xf)
+#define BCSR_WHOAMI_BOARD(x)		(((x) >> 8) & 0xf)
+
+/* register "WHOAMI" bits 11:8 identify the board */
+enum bcsr_whoami_boards {
+	BCSR_WHOAMI_PB1500 = 1,
+	BCSR_WHOAMI_PB1500R2,
+	BCSR_WHOAMI_PB1100,
+	BCSR_WHOAMI_DB1000,
+	BCSR_WHOAMI_DB1100,
+	BCSR_WHOAMI_DB1500,
+	BCSR_WHOAMI_DB1550,
+	BCSR_WHOAMI_PB1550_DDR,
+	BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
+	BCSR_WHOAMI_PB1550_SDR,
+	BCSR_WHOAMI_PB1200_DDR1,
+	BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
+	BCSR_WHOAMI_PB1200_DDR2,
+	BCSR_WHOAMI_DB1200,
+};
+
+/* STATUS reg.  Unless otherwise noted, they're valid on all boards.
+ * PB1200 = DB1200.
+ */
+#define BCSR_STATUS_PC0VS		0x0003
+#define BCSR_STATUS_PC1VS		0x000C
+#define BCSR_STATUS_PC0FI		0x0010
+#define BCSR_STATUS_PC1FI		0x0020
+#define BCSR_STATUS_PB1550_SWAPBOOT	0x0040
+#define BCSR_STATUS_SRAMWIDTH		0x0080
+#define BCSR_STATUS_FLASHBUSY		0x0100
+#define BCSR_STATUS_ROMBUSY		0x0400
+#define BCSR_STATUS_SD0WP		0x0400	/* DB1200 */
+#define BCSR_STATUS_SD1WP		0x0800
+#define BCSR_STATUS_USBOTGID		0x0800	/* PB/DB1550 */
+#define BCSR_STATUS_DB1000_SWAPBOOT	0x2000
+#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200 */
+#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200 */
+#define BCSR_STATUS_DB1200_U0RXD	0x1000	/* DB1200 */
+#define BCSR_STATUS_DB1200_U1RXD	0x2000	/* DB1200 */
+#define BCSR_STATUS_FLASHDEN		0xC000
+#define BCSR_STATUS_DB1550_U0RXD	0x1000	/* DB1550 */
+#define BCSR_STATUS_DB1550_U3RXD	0x2000	/* DB1550 */
+#define BCSR_STATUS_PB1550_U0RXD	0x1000	/* PB1550 */
+#define BCSR_STATUS_PB1550_U1RXD	0x2000	/* PB1550 */
+#define BCSR_STATUS_PB1550_U3RXD	0x8000	/* PB1550 */
+
+
+/* DB/PB1000,1100,1500,1550 */
+#define BCSR_RESETS_PHY0		0x0001
+#define BCSR_RESETS_PHY1		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_FIR_SEL		0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
+#define BCSR_RESETS_PB1550_WSCFSM	0x2000
+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
+#define BCSR_RESETS_DMAREQ		0x8000	/* PB1550 */
+
+#define BCSR_BOARD_PCIM66EN		0x0001
+#define BCSR_BOARD_SD0PWR		0x0040
+#define BCSR_BOARD_SD1PWR		0x0080
+#define BCSR_BOARD_PCIM33		0x0100
+#define BCSR_BOARD_PCIEXTARB		0x0200
+#define BCSR_BOARD_GPIO200RST		0x0400
+#define BCSR_BOARD_PCICLKOUT		0x0800
+#define BCSR_BOARD_PCICFG		0x1000
+#define BCSR_BOARD_SPISEL		0x4000	/* PB/DB1550 */
+#define BCSR_BOARD_SD0WP		0x4000	/* DB1100 */
+#define BCSR_BOARD_SD1WP		0x8000	/* DB1100 */
+
+
+/* DB/PB1200 */
+#define BCSR_RESETS_ETH			0x0001
+#define BCSR_RESETS_CAMERA		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_IDE			0x0008
+#define BCSR_RESETS_TV			0x0010	/* DB1200 */
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX		0x0800	/* DB1200 */
+#define BCSR_RESETS_PB1200_WSCFSM	0x0800	/* PB1200 */
+#define BCSR_RESETS_PSC0MUX		0x1000
+#define BCSR_RESETS_PSC1MUX		0x2000
+#define BCSR_RESETS_SPISEL		0x4000
+#define BCSR_RESETS_SD1MUX		0x8000	/* PB1200 */
+
+#define BCSR_BOARD_LCDVEE		0x0001
+#define BCSR_BOARD_LCDVDD		0x0002
+#define BCSR_BOARD_LCDBL		0x0004
+#define BCSR_BOARD_CAMSNAP		0x0010
+#define BCSR_BOARD_CAMPWR		0x0020
+#define BCSR_BOARD_SD0PWR		0x0040
+
+
+#define BCSR_SWITCHES_DIP		0x00FF
+#define BCSR_SWITCHES_DIP_1		0x0080
+#define BCSR_SWITCHES_DIP_2		0x0040
+#define BCSR_SWITCHES_DIP_3		0x0020
+#define BCSR_SWITCHES_DIP_4		0x0010
+#define BCSR_SWITCHES_DIP_5		0x0008
+#define BCSR_SWITCHES_DIP_6		0x0004
+#define BCSR_SWITCHES_DIP_7		0x0002
+#define BCSR_SWITCHES_DIP_8		0x0001
+#define BCSR_SWITCHES_ROTARY		0x0F00
+
+
+#define BCSR_PCMCIA_PC0VPP		0x0003
+#define BCSR_PCMCIA_PC0VCC		0x000C
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+#define BCSR_PCMCIA_PC1VPP		0x0300
+#define BCSR_PCMCIA_PC1VCC		0x0C00
+#define BCSR_PCMCIA_PC1DRVEN		0x1000
+#define BCSR_PCMCIA_PC1RST		0x8000
+
+
+#define BCSR_LEDS_DECIMALS		0x0003
+#define BCSR_LEDS_LED0			0x0100
+#define BCSR_LEDS_LED1			0x0200
+#define BCSR_LEDS_LED2			0x0400
+#define BCSR_LEDS_LED3			0x0800
+
+
+#define BCSR_SYSTEM_RESET		0x8000	/* clear to reset */
+#define BCSR_SYSTEM_PWROFF		0x4000	/* set to power off */
+#define BCSR_SYSTEM_VDDI		0x001F	/* PB1xxx boards */
+
+
+
+
+/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
+ * BCSR spaces.
+ */
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
+
+/* read a board register */
+unsigned short bcsr_read(enum bcsr_id reg);
+
+/* write to a board register */
+void bcsr_write(enum bcsr_id reg, unsigned short val);
+
+/* modify a register. clear bits set in 'clr', set bits set in 'set' */
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
+
+#endif
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index 27f26102b1bb..2909b834e4af 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -45,113 +45,6 @@
 #define AC97_PSC_BASE		PSC1_BASE_ADDR
 #define I2S_PSC_BASE		PSC1_BASE_ADDR
 
-#define BCSR_KSEG1_ADDR 	0xB9800000
-
-typedef volatile struct
-{
-	/*00*/	u16 whoami;
-		u16 reserved0;
-	/*04*/	u16 status;
-		u16 reserved1;
-	/*08*/	u16 switches;
-		u16 reserved2;
-	/*0C*/	u16 resets;
-		u16 reserved3;
-
-	/*10*/	u16 pcmcia;
-		u16 reserved4;
-	/*14*/	u16 board;
-		u16 reserved5;
-	/*18*/	u16 disk_leds;
-		u16 reserved6;
-	/*1C*/	u16 system;
-		u16 reserved7;
-
-	/*20*/	u16 intclr;
-		u16 reserved8;
-	/*24*/	u16 intset;
-		u16 reserved9;
-	/*28*/	u16 intclr_mask;
-		u16 reserved10;
-	/*2C*/	u16 intset_mask;
-		u16 reserved11;
-
-	/*30*/	u16 sig_status;
-		u16 reserved12;
-	/*34*/	u16 int_status;
-		u16 reserved13;
-	/*38*/	u16 reserved14;
-		u16 reserved15;
-	/*3C*/	u16 reserved16;
-		u16 reserved17;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID	0x000F
-#define BCSR_WHOAMI_CPLD	0x00F0
-#define BCSR_WHOAMI_BOARD	0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS	0x0003
-#define BCSR_STATUS_PCMCIA1VS	0x000C
-#define BCSR_STATUS_SWAPBOOT	0x0040
-#define BCSR_STATUS_FLASHBUSY	0x0100
-#define BCSR_STATUS_IDECBLID	0x0200
-#define BCSR_STATUS_SD0WP	0x0400
-#define BCSR_STATUS_U0RXD	0x1000
-#define BCSR_STATUS_U1RXD	0x2000
-
-#define BCSR_SWITCHES_OCTAL	0x00FF
-#define BCSR_SWITCHES_DIP_1	0x0080
-#define BCSR_SWITCHES_DIP_2	0x0040
-#define BCSR_SWITCHES_DIP_3	0x0020
-#define BCSR_SWITCHES_DIP_4	0x0010
-#define BCSR_SWITCHES_DIP_5	0x0008
-#define BCSR_SWITCHES_DIP_6	0x0004
-#define BCSR_SWITCHES_DIP_7	0x0002
-#define BCSR_SWITCHES_DIP_8	0x0001
-#define BCSR_SWITCHES_ROTARY	0x0F00
-
-#define BCSR_RESETS_ETH		0x0001
-#define BCSR_RESETS_CAMERA	0x0002
-#define BCSR_RESETS_DC		0x0004
-#define BCSR_RESETS_IDE		0x0008
-#define BCSR_RESETS_TV		0x0010
-/* Not resets but in the same register */
-#define BCSR_RESETS_PWMR1MUX	0x0800
-#define BCSR_RESETS_PCS0MUX	0x1000
-#define BCSR_RESETS_PCS1MUX	0x2000
-#define BCSR_RESETS_SPISEL	0x4000
-
-#define BCSR_PCMCIA_PC0VPP	0x0003
-#define BCSR_PCMCIA_PC0VCC	0x000C
-#define BCSR_PCMCIA_PC0DRVEN	0x0010
-#define BCSR_PCMCIA_PC0RST	0x0080
-#define BCSR_PCMCIA_PC1VPP	0x0300
-#define BCSR_PCMCIA_PC1VCC	0x0C00
-#define BCSR_PCMCIA_PC1DRVEN	0x1000
-#define BCSR_PCMCIA_PC1RST	0x8000
-
-#define BCSR_BOARD_LCDVEE	0x0001
-#define BCSR_BOARD_LCDVDD	0x0002
-#define BCSR_BOARD_LCDBL	0x0004
-#define BCSR_BOARD_CAMSNAP	0x0010
-#define BCSR_BOARD_CAMPWR	0x0020
-#define BCSR_BOARD_SD0PWR	0x0040
-
-#define BCSR_LEDS_DECIMALS	0x0003
-#define BCSR_LEDS_LED0		0x0100
-#define BCSR_LEDS_LED1		0x0200
-#define BCSR_LEDS_LED2		0x0400
-#define BCSR_LEDS_LED3		0x0800
-
-#define BCSR_SYSTEM_POWEROFF	0x4000
-#define BCSR_SYSTEM_RESET	0x8000
-
 /* Bit positions for the different interrupt sources */
 #define BCSR_INT_IDE		0x0001
 #define BCSR_INT_ETH		0x0002
@@ -222,7 +115,7 @@ enum external_pb1200_ints {
 
 #define BOARD_PC0_INT	DB1200_PC0_INT
 #define BOARD_PC1_INT	DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+#define BOARD_CARD_INSERTED(SOCKET) (bcsr_read(BCSR_SIGSTAT) & (1 << (8 + (2 * SOCKET))))
 
 /* NAND chip select */
 #define NAND_CS 1
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
index 1a515b8c870f..cfa64297da08 100644
--- a/arch/mips/include/asm/mach-db1x00/db1x00.h
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -41,102 +41,10 @@
 #define SMBUS_PSC_BASE		PSC2_BASE_ADDR
 #define I2S_PSC_BASE		PSC3_BASE_ADDR
 
-#define BCSR_KSEG1_ADDR 	0xAF000000
 #define NAND_PHYS_ADDR		0x20000000
 
-#else
-#define BCSR_KSEG1_ADDR 0xAE000000
 #endif
 
-/*
- * Overlay data structure of the DBAu1x00 board registers.
- * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
- */
-typedef volatile struct
-{
-	/*00*/	unsigned short whoami;
-	unsigned short reserved0;
-	/*04*/	unsigned short status;
-	unsigned short reserved1;
-	/*08*/	unsigned short switches;
-	unsigned short reserved2;
-	/*0C*/	unsigned short resets;
-	unsigned short reserved3;
-	/*10*/	unsigned short pcmcia;
-	unsigned short reserved4;
-	/*14*/	unsigned short specific;
-	unsigned short reserved5;
-	/*18*/	unsigned short leds;
-	unsigned short reserved6;
-	/*1C*/	unsigned short swreset;
-	unsigned short reserved7;
-
-} BCSR;
-
-
-/*
- * Register/mask bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID		0x000F
-#define BCSR_WHOAMI_CPLD		0x00F0
-#define BCSR_WHOAMI_BOARD		0x0F00
-
-#define BCSR_STATUS_PC0VS		0x0003
-#define BCSR_STATUS_PC1VS		0x000C
-#define BCSR_STATUS_PC0FI		0x0010
-#define BCSR_STATUS_PC1FI		0x0020
-#define BCSR_STATUS_FLASHBUSY		0x0100
-#define BCSR_STATUS_ROMBUSY		0x0400
-#define BCSR_STATUS_SWAPBOOT		0x2000
-#define BCSR_STATUS_FLASHDEN		0xC000
-
-#define BCSR_SWITCHES_DIP		0x00FF
-#define BCSR_SWITCHES_DIP_1		0x0080
-#define BCSR_SWITCHES_DIP_2		0x0040
-#define BCSR_SWITCHES_DIP_3		0x0020
-#define BCSR_SWITCHES_DIP_4		0x0010
-#define BCSR_SWITCHES_DIP_5		0x0008
-#define BCSR_SWITCHES_DIP_6		0x0004
-#define BCSR_SWITCHES_DIP_7		0x0002
-#define BCSR_SWITCHES_DIP_8		0x0001
-#define BCSR_SWITCHES_ROTARY		0x0F00
-
-#define BCSR_RESETS_PHY0		0x0001
-#define BCSR_RESETS_PHY1		0x0002
-#define BCSR_RESETS_DC			0x0004
-#define BCSR_RESETS_FIR_SEL		0x2000
-#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
-#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
-#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
-#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
-#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
-
-#define BCSR_PCMCIA_PC0VPP		0x0003
-#define BCSR_PCMCIA_PC0VCC		0x000C
-#define BCSR_PCMCIA_PC0DRVEN		0x0010
-#define BCSR_PCMCIA_PC0RST		0x0080
-#define BCSR_PCMCIA_PC1VPP		0x0300
-#define BCSR_PCMCIA_PC1VCC		0x0C00
-#define BCSR_PCMCIA_PC1DRVEN		0x1000
-#define BCSR_PCMCIA_PC1RST		0x8000
-
-#define BCSR_BOARD_PCIM66EN		0x0001
-#define BCSR_BOARD_SD0_PWR		0x0040
-#define BCSR_BOARD_SD1_PWR		0x0080
-#define BCSR_BOARD_PCIM33		0x0100
-#define BCSR_BOARD_GPIO200RST		0x0400
-#define BCSR_BOARD_PCICFG		0x1000
-#define BCSR_BOARD_SD0_WP		0x4000
-#define BCSR_BOARD_SD1_WP		0x8000
-
-#define BCSR_LEDS_DECIMALS		0x0003
-#define BCSR_LEDS_LED0			0x0100
-#define BCSR_LEDS_LED1			0x0200
-#define BCSR_LEDS_LED2			0x0400
-#define BCSR_LEDS_LED3			0x0800
-
-#define BCSR_SWRESET_RESET		0x0080
-
 /* PCMCIA DBAu1x00 specific defines */
 #define PCMCIA_MAX_SOCK  1
 #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h
index b1a60f1cbd02..f2bf73a11fb2 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1100.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h
@@ -26,55 +26,6 @@
 #ifndef __ASM_PB1100_H
 #define __ASM_PB1100_H
 
-#define PB1100_IDENT		0xAE000000
-#define BOARD_STATUS_REG	0xAE000004
-#  define PB1100_ROM_SEL	(1 << 15)
-#  define PB1100_ROM_SIZ	(1 << 14)
-#  define PB1100_SWAP_BOOT	(1 << 13)
-#  define PB1100_FLASH_WP	(1 << 12)
-#  define PB1100_ROM_H_STS	(1 << 11)
-#  define PB1100_ROM_L_STS	(1 << 10)
-#  define PB1100_FLASH_H_STS	(1 << 9)
-#  define PB1100_FLASH_L_STS	(1 << 8)
-#  define PB1100_SRAM_SIZ	(1 << 7)
-#  define PB1100_TSC_BUSY	(1 << 6)
-#  define PB1100_PCMCIA_VS_MASK (3 << 4)
-#  define PB1100_RS232_CD	(1 << 3)
-#  define PB1100_RS232_CTS	(1 << 2)
-#  define PB1100_RS232_DSR	(1 << 1)
-#  define PB1100_RS232_RI	(1 << 0)
-
-#define PB1100_IRDA_RS232	0xAE00000C
-#  define PB1100_IRDA_FULL	(0 << 14)	/* full power		*/
-#  define PB1100_IRDA_SHUTDOWN	(1 << 14)
-#  define PB1100_IRDA_TT	(2 << 14)	/* 2/3 power		*/
-#  define PB1100_IRDA_OT	(3 << 14)	/* 1/3 power		*/
-#  define PB1100_IRDA_FIR	(1 << 13)
-
-#define PCMCIA_BOARD_REG	0xAE000010
-#  define PB1100_SD_WP1_RO	(1 << 15)	/* read only		*/
-#  define PB1100_SD_WP0_RO	(1 << 14)	/* read only		*/
-#  define PB1100_SD_PWR1	(1 << 11)	/* applies power to SD1 */
-#  define PB1100_SD_PWR0	(1 << 10)	/* applies power to SD0 */
-#  define PB1100_SEL_SD_CONN1	(1 << 9)
-#  define PB1100_SEL_SD_CONN0	(1 << 8)
-#  define PC_DEASSERT_RST	(1 << 7)
-#  define PC_DRV_EN		(1 << 4)
-
-#define PB1100_G_CONTROL	0xAE000014	/* graphics control	*/
-
-#define PB1100_RST_VDDI 	0xAE00001C
-#  define PB1100_SOFT_RESET	(1 << 15)	/* clear to reset the board */
-#  define PB1100_VDDI_MASK	0x1F
-
-#define PB1100_LEDS		0xAE000018
-
-/*
- * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0  is the LED Display's decimal points.
- */
-#define PB1100_HEX_LED		0xAE000018
-
 /* PCMCIA Pb1100 specific defines */
 #define PCMCIA_MAX_SOCK  0
 #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index c8618df88cb5..a51512c68177 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -43,113 +43,8 @@
  * Refer to board documentation.
  */
 #define AC97_PSC_BASE       PSC1_BASE_ADDR
-#define I2S_PSC_BASE		PSC1_BASE_ADDR
+#define I2S_PSC_BASE	PSC1_BASE_ADDR
 
-#define BCSR_KSEG1_ADDR 0xAD800000
-
-typedef volatile struct
-{
-	/*00*/	u16 whoami;
-		u16 reserved0;
-	/*04*/	u16 status;
-		u16 reserved1;
-	/*08*/	u16 switches;
-		u16 reserved2;
-	/*0C*/	u16 resets;
-		u16 reserved3;
-
-	/*10*/	u16 pcmcia;
-		u16 reserved4;
-	/*14*/	u16 board;
-		u16 reserved5;
-	/*18*/	u16 disk_leds;
-		u16 reserved6;
-	/*1C*/	u16 system;
-		u16 reserved7;
-
-	/*20*/	u16 intclr;
-		u16 reserved8;
-	/*24*/	u16 intset;
-		u16 reserved9;
-	/*28*/	u16 intclr_mask;
-		u16 reserved10;
-	/*2C*/	u16 intset_mask;
-		u16 reserved11;
-
-	/*30*/	u16 sig_status;
-		u16 reserved12;
-	/*34*/	u16 int_status;
-		u16 reserved13;
-	/*38*/	u16 reserved14;
-		u16 reserved15;
-	/*3C*/	u16 reserved16;
-		u16 reserved17;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID	0x000F
-#define BCSR_WHOAMI_CPLD	0x00F0
-#define BCSR_WHOAMI_BOARD	0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS	0x0003
-#define BCSR_STATUS_PCMCIA1VS	0x000C
-#define BCSR_STATUS_SWAPBOOT	0x0040
-#define BCSR_STATUS_FLASHBUSY	0x0100
-#define BCSR_STATUS_IDECBLID	0x0200
-#define BCSR_STATUS_SD0WP	0x0400
-#define BCSR_STATUS_SD1WP	0x0800
-#define BCSR_STATUS_U0RXD	0x1000
-#define BCSR_STATUS_U1RXD	0x2000
-
-#define BCSR_SWITCHES_OCTAL	0x00FF
-#define BCSR_SWITCHES_DIP_1	0x0080
-#define BCSR_SWITCHES_DIP_2	0x0040
-#define BCSR_SWITCHES_DIP_3	0x0020
-#define BCSR_SWITCHES_DIP_4	0x0010
-#define BCSR_SWITCHES_DIP_5	0x0008
-#define BCSR_SWITCHES_DIP_6	0x0004
-#define BCSR_SWITCHES_DIP_7	0x0002
-#define BCSR_SWITCHES_DIP_8	0x0001
-#define BCSR_SWITCHES_ROTARY	0x0F00
-
-#define BCSR_RESETS_ETH		0x0001
-#define BCSR_RESETS_CAMERA	0x0002
-#define BCSR_RESETS_DC		0x0004
-#define BCSR_RESETS_IDE		0x0008
-/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM	0x0800
-#define BCSR_RESETS_PCS0MUX	0x1000
-#define BCSR_RESETS_PCS1MUX	0x2000
-#define BCSR_RESETS_SPISEL	0x4000
-#define BCSR_RESETS_SD1MUX	0x8000
-
-#define BCSR_PCMCIA_PC0VPP	0x0003
-#define BCSR_PCMCIA_PC0VCC	0x000C
-#define BCSR_PCMCIA_PC0DRVEN	0x0010
-#define BCSR_PCMCIA_PC0RST	0x0080
-#define BCSR_PCMCIA_PC1VPP	0x0300
-#define BCSR_PCMCIA_PC1VCC	0x0C00
-#define BCSR_PCMCIA_PC1DRVEN	0x1000
-#define BCSR_PCMCIA_PC1RST	0x8000
-
-#define BCSR_BOARD_LCDVEE	0x0001
-#define BCSR_BOARD_LCDVDD	0x0002
-#define BCSR_BOARD_LCDBL	0x0004
-#define BCSR_BOARD_CAMSNAP	0x0010
-#define BCSR_BOARD_CAMPWR	0x0020
-#define BCSR_BOARD_SD0PWR	0x0040
-#define BCSR_BOARD_SD1PWR	0x0080
-
-#define BCSR_LEDS_DECIMALS	0x00FF
-#define BCSR_LEDS_LED0		0x0100
-#define BCSR_LEDS_LED1		0x0200
-#define BCSR_LEDS_LED2		0x0400
-#define BCSR_LEDS_LED3		0x0800
 
 #define BCSR_SYSTEM_VDDI	0x001F
 #define BCSR_SYSTEM_POWEROFF	0x4000
@@ -251,7 +146,7 @@ enum external_pb1200_ints {
 
 #define BOARD_PC0_INT	PB1200_PC0_INT
 #define BOARD_PC1_INT	PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+#define BOARD_CARD_INSERTED(SOCKET) (bcsr_read(BCSR_SIGSTAT & (1 << (8 + (2 * SOCKET))))
 
 /* NAND chip select */
 #define NAND_CS 1
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h
index da51a2eb7b82..82431a7ab942 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1500.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h
@@ -26,19 +26,6 @@
 #ifndef __ASM_PB1500_H
 #define __ASM_PB1500_H
 
-#define IDENT_BOARD_REG 	0xAE000000
-#define BOARD_STATUS_REG	0xAE000004
-#define PCI_BOARD_REG		0xAE000010
-#define PCMCIA_BOARD_REG	0xAE000010
-#  define PC_DEASSERT_RST	      0x80
-#  define PC_DRV_EN		      0x10
-#define PB1500_G_CONTROL	0xAE000014
-#define PB1500_RST_VDDI 	0xAE00001C
-#define PB1500_LEDS		0xAE000018
-
-#define PB1500_HEX_LED		0xAF000004
-#define PB1500_HEX_LED_BLANK	0xAF000008
-
 /* PCMCIA Pb1500 specific defines */
 #define PCMCIA_MAX_SOCK  0
 #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index 6704a11497db..306d584abbd4 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -40,95 +40,6 @@
 #define SMBUS_PSC_BASE		PSC2_BASE_ADDR
 #define I2S_PSC_BASE		PSC3_BASE_ADDR
 
-#define BCSR_PHYS_ADDR 0xAF000000
-
-typedef volatile struct
-{
-	/*00*/	u16 whoami;
-		u16 reserved0;
-	/*04*/	u16 status;
-		u16 reserved1;
-	/*08*/	u16 switches;
-		u16 reserved2;
-	/*0C*/	u16 resets;
-		u16 reserved3;
-	/*10*/	u16 pcmcia;
-		u16 reserved4;
-	/*14*/	u16 pci;
-		u16 reserved5;
-	/*18*/	u16 leds;
-		u16 reserved6;
-	/*1C*/	u16 system;
-		u16 reserved7;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID	0x000F
-#define BCSR_WHOAMI_CPLD	0x00F0
-#define BCSR_WHOAMI_BOARD	0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS	0x0003
-#define BCSR_STATUS_PCMCIA1VS	0x000C
-#define BCSR_STATUS_PCMCIA0FI	0x0010
-#define BCSR_STATUS_PCMCIA1FI	0x0020
-#define BCSR_STATUS_SWAPBOOT	0x0040
-#define BCSR_STATUS_SRAMWIDTH	0x0080
-#define BCSR_STATUS_FLASHBUSY	0x0100
-#define BCSR_STATUS_ROMBUSY	0x0200
-#define BCSR_STATUS_USBOTGID	0x0800
-#define BCSR_STATUS_U0RXD	0x1000
-#define BCSR_STATUS_U1RXD	0x2000
-#define BCSR_STATUS_U3RXD	0x8000
-
-#define BCSR_SWITCHES_OCTAL	0x00FF
-#define BCSR_SWITCHES_DIP_1	0x0080
-#define BCSR_SWITCHES_DIP_2	0x0040
-#define BCSR_SWITCHES_DIP_3	0x0020
-#define BCSR_SWITCHES_DIP_4	0x0010
-#define BCSR_SWITCHES_DIP_5	0x0008
-#define BCSR_SWITCHES_DIP_6	0x0004
-#define BCSR_SWITCHES_DIP_7	0x0002
-#define BCSR_SWITCHES_DIP_8	0x0001
-#define BCSR_SWITCHES_ROTARY	0x0F00
-
-#define BCSR_RESETS_PHY0	0x0001
-#define BCSR_RESETS_PHY1	0x0002
-#define BCSR_RESETS_DC		0x0004
-#define BCSR_RESETS_WSC		0x2000
-#define BCSR_RESETS_SPISEL	0x4000
-#define BCSR_RESETS_DMAREQ	0x8000
-
-#define BCSR_PCMCIA_PC0VPP	0x0003
-#define BCSR_PCMCIA_PC0VCC	0x000C
-#define BCSR_PCMCIA_PC0DRVEN	0x0010
-#define BCSR_PCMCIA_PC0RST	0x0080
-#define BCSR_PCMCIA_PC1VPP	0x0300
-#define BCSR_PCMCIA_PC1VCC	0x0C00
-#define BCSR_PCMCIA_PC1DRVEN	0x1000
-#define BCSR_PCMCIA_PC1RST	0x8000
-
-#define BCSR_PCI_M66EN		0x0001
-#define BCSR_PCI_M33		0x0100
-#define BCSR_PCI_EXTERNARB	0x0200
-#define BCSR_PCI_GPIO200RST	0x0400
-#define BCSR_PCI_CLKOUT		0x0800
-#define BCSR_PCI_CFGHOST	0x1000
-
-#define BCSR_LEDS_DECIMALS	0x00FF
-#define BCSR_LEDS_LED0		0x0100
-#define BCSR_LEDS_LED1		0x0200
-#define BCSR_LEDS_LED2		0x0400
-#define BCSR_LEDS_LED3		0x0800
-
-#define BCSR_SYSTEM_VDDI	0x001F
-#define BCSR_SYSTEM_POWEROFF	0x4000
-#define BCSR_SYSTEM_RESET	0x8000
-
 #define PCMCIA_MAX_SOCK  1
 #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
 
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 92c334ff4508..43d46e424040 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -19,6 +19,7 @@
 #include <asm/io.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 /*
  * MTD structure for NAND controller
@@ -475,7 +476,8 @@ static int __init au1xxx_nand_init(void)
 	/* set gpio206 high */
 	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
 
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+
 	switch (boot_swapboot) {
 	case 0:
 	case 2:
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 9b2eebdbb25b..b5cbd39d0685 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -36,6 +36,7 @@
 #include <asm/pb1000.h>
 #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
 #include <asm/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
 #else 
 #error au1k_ir: unsupported board
 #endif
@@ -66,10 +67,6 @@ static char version[] __devinitdata =
 
 #define RUN_AT(x) (jiffies + (x))
 
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-static BCSR * const bcsr = (BCSR *)0xAE000000;
-#endif
-
 static DEFINE_SPINLOCK(ir_lock);
 
 /*
@@ -282,9 +279,8 @@ static int au1k_irda_net_init(struct net_device *dev)
 
 #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
 	/* power on */
-	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-	bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL;
-	au_sync();
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+			      BCSR_RESETS_IRDA_MODE_FULL);
 #endif
 
 	return 0;
@@ -720,14 +716,14 @@ au1k_irda_set_speed(struct net_device *dev, int speed)
 
 	if (speed == 4000000) {
 #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr->resets |= BCSR_RESETS_FIR_SEL;
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL);
 #else /* Pb1000 and Pb1100 */
 		writel(1<<13, CPLD_AUX1);
 #endif
 	}
 	else {
 #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr->resets &= ~BCSR_RESETS_FIR_SEL;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0);
 #else /* Pb1000 and Pb1100 */
 		writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
 #endif
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index c78d77fd7e3b..3fdd664e41c6 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -47,9 +47,9 @@
 	#include <pb1200.h>
 #else
 	#include <asm/mach-db1x00/db1x00.h>
-	static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 #endif
 
+#include <asm/mach-db1x00/bcsr.h>
 #include "au1000_generic.h"
 
 #if 0
@@ -76,8 +76,8 @@ static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
 
 static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
 {
-	bcsr->pcmcia = 0; /* turn off power */
-	au_sync_delay(2);
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off power */
+	msleep(2);
 }
 
 static void
@@ -93,19 +93,19 @@ db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state
 
 	switch (skt->nr) {
 	case 0:
-		vs = bcsr->status & 0x3;
+		vs = bcsr_read(BCSR_STATUS) & 0x3;
 #if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
 		inserted = BOARD_CARD_INSERTED(0);
 #else
-		inserted = !(bcsr->status & (1<<4));
+		inserted = !(bcsr_read(BCSR_STATUS) & (1 << 4));
 #endif
 		break;
 	case 1:
-		vs = (bcsr->status & 0xC)>>2;
+		vs = (bcsr_read(BCSR_STATUS) & 0xC) >> 2;
 #if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
 		inserted = BOARD_CARD_INSERTED(1);
 #else
-		inserted = !(bcsr->status & (1<<5));
+		inserted = !(bcsr_read(BCSR_STATUS) & (1<<5));
 #endif
 		break;
 	default:/* should never happen */
@@ -114,7 +114,7 @@ db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state
 
 	if (inserted)
 		debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
-				skt->nr, inserted, vs, bcsr->pcmcia);
+				skt->nr, inserted, vs, bcsr_read(BCSR_PCMCIA));
 
 	if (inserted) {
 		switch (vs) {
@@ -136,19 +136,21 @@ db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state
 		/* if the card was previously inserted and then ejected,
 		 * we should turn off power to it
 		 */
-		if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
-			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
-					BCSR_PCMCIA_PC0DRVEN |
-					BCSR_PCMCIA_PC0VPP |
-					BCSR_PCMCIA_PC0VCC);
-			au_sync_delay(10);
+		if ((skt->nr == 0) &&
+		    (bcsr_read(BCSR_PCMCIA) & BCSR_PCMCIA_PC0RST)) {
+			bcsr_mod(BCSR_PCMCIA, BCSR_PCMCIA_PC0RST   |
+					      BCSR_PCMCIA_PC0DRVEN |
+					      BCSR_PCMCIA_PC0VPP   |
+					      BCSR_PCMCIA_PC0VCC, 0);
+			msleep(10);
 		}
-		else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
-			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
-					BCSR_PCMCIA_PC1DRVEN |
-					BCSR_PCMCIA_PC1VPP |
-					BCSR_PCMCIA_PC1VCC);
-			au_sync_delay(10);
+		else if ((skt->nr == 1) &&
+			 (bcsr_read(BCSR_PCMCIA) & BCSR_PCMCIA_PC1RST)) {
+			bcsr_mod(BCSR_PCMCIA, BCSR_PCMCIA_PC1RST   |
+					      BCSR_PCMCIA_PC1DRVEN |
+					      BCSR_PCMCIA_PC1VPP   |
+					      BCSR_PCMCIA_PC1VCC, 0);
+			msleep(10);
 		}
 	}
 
@@ -171,7 +173,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
 	 * initializing a socket not to wipe out the settings of the
 	 * other socket.
 	 */
-	pwr = bcsr->pcmcia;
+	pwr = bcsr_read(BCSR_PCMCIA);
 	pwr &= ~(0xf << sock*8); /* clear voltage settings */
 
 	state->Vpp = 0;
@@ -228,37 +230,37 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
 			break;
 	}
 
-	bcsr->pcmcia = pwr;
-	au_sync_delay(300);
+	bcsr_write(BCSR_PCMCIA, pwr);
+	msleep(300);
 
 	if (sock == 0) {
 		if (!(state->flags & SS_RESET)) {
 			pwr |= BCSR_PCMCIA_PC0DRVEN;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(300);
+			bcsr_write(BCSR_PCMCIA, pwr);
+			msleep(300);
 			pwr |= BCSR_PCMCIA_PC0RST;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
+			bcsr_write(BCSR_PCMCIA, pwr);
+			msleep(100);
 		}
 		else {
 			pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
+			bcsr_write(BCSR_PCMCIA, pwr);
+			msleep(100);
 		}
 	}
 	else {
 		if (!(state->flags & SS_RESET)) {
 			pwr |= BCSR_PCMCIA_PC1DRVEN;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(300);
+			bcsr_write(BCSR_PCMCIA, pwr);
+			msleep(300);
 			pwr |= BCSR_PCMCIA_PC1RST;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
+			bcsr_write(BCSR_PCMCIA, pwr);
+			msleep(100);
 		}
 		else {
 			pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
+			bcsr_write(BCSR_PCMCIA, pwr);
+			msleep(100);
 		}
 	}
 	return 0;
@@ -298,8 +300,8 @@ struct pcmcia_low_level db1x00_pcmcia_ops = {
 int au1x_board_init(struct device *dev)
 {
 	int ret = -ENODEV;
-	bcsr->pcmcia = 0; /* turn off power, if it's not already off */
-	au_sync_delay(2);
+	bcsr_write(BCSR_PCMCIA, 0); /* turn off power, if it's not already off */
+	msleep(2);
 	ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
 	return ret;
 }
-- 
cgit v1.2.3


From bd2302c220566cffd0756e1ac5f65705f9e3d8e7 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 10 Nov 2009 01:13:38 +0100
Subject: NET: au1000-eth: Convert to platform_driver model

This patch converts the au1000-eth driver to become a full platform-driver
as it ought to be. We now pass PHY-speficic configurations through
platform_data but for compatibility the driver still assumes the default
settings (search for PHY1 on MAC0) when no platform_data is passed. Tested
on my MTX-1 board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Patchwork: http://patchwork.linux-mips.org/patch/619/
Patchwork: http://patchwork.linux-mips.org/patch/963/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/net/au1000_eth.c | 441 ++++++++++++++++++++++++-----------------------
 drivers/net/au1000_eth.h |   9 +
 2 files changed, 232 insertions(+), 218 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 6bac04603a88..6e5a68ecde09 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -55,6 +55,7 @@
 #include <linux/delay.h>
 #include <linux/crc32.h>
 #include <linux/phy.h>
+#include <linux/platform_device.h>
 
 #include <asm/cpu.h>
 #include <asm/mipsregs.h>
@@ -63,6 +64,7 @@
 #include <asm/processor.h>
 
 #include <au1000.h>
+#include <au1xxx_eth.h>
 #include <prom.h>
 
 #include "au1000_eth.h"
@@ -112,15 +114,15 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
  *
  * PHY detection algorithm
  *
- * If AU1XXX_PHY_STATIC_CONFIG is undefined, the PHY setup is
+ * If phy_static_config is undefined, the PHY setup is
  * autodetected:
  *
  * mii_probe() first searches the current MAC's MII bus for a PHY,
- * selecting the first (or last, if AU1XXX_PHY_SEARCH_HIGHEST_ADDR is
+ * selecting the first (or last, if phy_search_highest_addr is
  * defined) PHY address not already claimed by another netdev.
  *
  * If nothing was found that way when searching for the 2nd ethernet
- * controller's PHY and AU1XXX_PHY1_SEARCH_ON_MAC0 is defined, then
+ * controller's PHY and phy1_search_mac0 is defined, then
  * the first MII bus is searched as well for an unclaimed PHY; this is
  * needed in case of a dual-PHY accessible only through the MAC0's MII
  * bus.
@@ -129,9 +131,7 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
  * controller is not registered to the network subsystem.
  */
 
-/* autodetection defaults */
-#undef  AU1XXX_PHY_SEARCH_HIGHEST_ADDR
-#define AU1XXX_PHY1_SEARCH_ON_MAC0
+/* autodetection defaults: phy1_search_mac0 */
 
 /* static PHY setup
  *
@@ -148,29 +148,6 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
  * specific irq-map
  */
 
-#if defined(CONFIG_MIPS_BOSPORUS)
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-# define AU1XXX_PHY_STATIC_CONFIG
-
-# define AU1XXX_PHY0_ADDR  5
-# define AU1XXX_PHY0_BUSID 0
-#  undef AU1XXX_PHY0_IRQ
-
-#  undef AU1XXX_PHY1_ADDR
-#  undef AU1XXX_PHY1_BUSID
-#  undef AU1XXX_PHY1_IRQ
-#endif
-
-#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
-# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
-#endif
-
 static void enable_mac(struct net_device *dev, int force_reset)
 {
 	unsigned long flags;
@@ -390,67 +367,55 @@ static int mii_probe (struct net_device *dev)
 	struct au1000_private *const aup = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
 
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
-	BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
+	if (aup->phy_static_config) {
+		BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
 
-	if(aup->mac_id == 0) { /* get PHY0 */
-# if defined(AU1XXX_PHY0_ADDR)
-		phydev = au_macs[AU1XXX_PHY0_BUSID]->mii_bus->phy_map[AU1XXX_PHY0_ADDR];
-# else
-		printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
-			dev->name);
-		return 0;
-# endif /* defined(AU1XXX_PHY0_ADDR) */
-	} else if (aup->mac_id == 1) { /* get PHY1 */
-# if defined(AU1XXX_PHY1_ADDR)
-		phydev = au_macs[AU1XXX_PHY1_BUSID]->mii_bus->phy_map[AU1XXX_PHY1_ADDR];
-# else
-		printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
-			dev->name);
+		if (aup->phy_addr)
+			phydev = aup->mii_bus->phy_map[aup->phy_addr];
+		else
+			printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
+				dev->name);
 		return 0;
-# endif /* defined(AU1XXX_PHY1_ADDR) */
-	}
-
-#else /* defined(AU1XXX_PHY_STATIC_CONFIG) */
-	int phy_addr;
-
-	/* find the first (lowest address) PHY on the current MAC's MII bus */
-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-		if (aup->mii_bus->phy_map[phy_addr]) {
-			phydev = aup->mii_bus->phy_map[phy_addr];
-# if !defined(AU1XXX_PHY_SEARCH_HIGHEST_ADDR)
-			break; /* break out with first one found */
-# endif
-		}
+	} else {
+		int phy_addr;
+
+		/* find the first (lowest address) PHY on the current MAC's MII bus */
+		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+			if (aup->mii_bus->phy_map[phy_addr]) {
+				phydev = aup->mii_bus->phy_map[phy_addr];
+				if (!aup->phy_search_highest_addr)
+					break; /* break out with first one found */
+			}
 
-# if defined(AU1XXX_PHY1_SEARCH_ON_MAC0)
-	/* try harder to find a PHY */
-	if (!phydev && (aup->mac_id == 1)) {
-		/* no PHY found, maybe we have a dual PHY? */
-		printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
-			"let's see if it's attached to MAC0...\n");
+		if (aup->phy1_search_mac0) {
+			/* try harder to find a PHY */
+			if (!phydev && (aup->mac_id == 1)) {
+				/* no PHY found, maybe we have a dual PHY? */
+				printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
+					"let's see if it's attached to MAC0...\n");
 
-		BUG_ON(!au_macs[0]);
+				/* find the first (lowest address) non-attached PHY on
+				 * the MAC0 MII bus */
+				for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+					struct phy_device *const tmp_phydev =
+							aup->mii_bus->phy_map[phy_addr];
 
-		/* find the first (lowest address) non-attached PHY on
-		 * the MAC0 MII bus */
-		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-			struct phy_device *const tmp_phydev =
-				au_macs[0]->mii_bus->phy_map[phy_addr];
+					if (aup->mac_id == 1)
+						break;
 
-			if (!tmp_phydev)
-				continue; /* no PHY here... */
+					if (!tmp_phydev)
+						continue; /* no PHY here... */
 
-			if (tmp_phydev->attached_dev)
-				continue; /* already claimed by MAC0 */
+					if (tmp_phydev->attached_dev)
+						continue; /* already claimed by MAC0 */
 
-			phydev = tmp_phydev;
-			break; /* found it */
+					phydev = tmp_phydev;
+					break; /* found it */
+				}
+			}
 		}
 	}
-# endif /* defined(AU1XXX_PHY1_SEARCH_OTHER_BUS) */
 
-#endif /* defined(AU1XXX_PHY_STATIC_CONFIG) */
 	if (!phydev) {
 		printk (KERN_ERR DRV_NAME ":%s: no PHY found\n", dev->name);
 		return -1;
@@ -578,31 +543,6 @@ setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
 	}
 }
 
-static struct {
-	u32 base_addr;
-	u32 macen_addr;
-	int irq;
-	struct net_device *dev;
-} iflist[2] = {
-#ifdef CONFIG_SOC_AU1000
-	{AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT},
-	{AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1100
-	{AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1500
-	{AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT},
-	{AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1550
-	{AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT},
-	{AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT}
-#endif
-};
-
-static int num_ifs;
-
 /*
  * ethtool operations
  */
@@ -711,7 +651,6 @@ static int au1000_init(struct net_device *dev)
 
 static inline void update_rx_stats(struct net_device *dev, u32 status)
 {
-	struct au1000_private *aup = netdev_priv(dev);
 	struct net_device_stats *ps = &dev->stats;
 
 	ps->rx_packets++;
@@ -969,7 +908,7 @@ static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	pDB = aup->tx_db_inuse[aup->tx_head];
-	skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
+	skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
 	if (skb->len < ETH_ZLEN) {
 		for (i=skb->len; i<ETH_ZLEN; i++) {
 			((char *)pDB->vaddr)[i] = 0;
@@ -1058,53 +997,59 @@ static const struct net_device_ops au1000_netdev_ops = {
 	.ndo_change_mtu		= eth_change_mtu,
 };
 
-static struct net_device * au1000_probe(int port_num)
+static int __devinit au1000_probe(struct platform_device *pdev)
 {
 	static unsigned version_printed = 0;
 	struct au1000_private *aup = NULL;
+	struct au1000_eth_platform_data *pd;
 	struct net_device *dev = NULL;
 	db_dest_t *pDB, *pDBfree;
+	int irq, i, err = 0;
+	struct resource *base, *macen;
 	char ethaddr[6];
-	int irq, i, err;
-	u32 base, macen;
 
-	if (port_num >= NUM_ETH_INTERFACES)
-		return NULL;
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!base) {
+		printk(KERN_ERR DRV_NAME ": failed to retrieve base register\n");
+		err = -ENODEV;
+		goto out;
+	}
 
-	base  = CPHYSADDR(iflist[port_num].base_addr );
-	macen = CPHYSADDR(iflist[port_num].macen_addr);
-	irq = iflist[port_num].irq;
+	macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!macen) {
+		printk(KERN_ERR DRV_NAME ": failed to retrieve MAC Enable register\n");
+		err = -ENODEV;
+		goto out;
+	}
 
-	if (!request_mem_region( base, MAC_IOSIZE, "Au1x00 ENET") ||
-	    !request_mem_region(macen, 4, "Au1x00 ENET"))
-		return NULL;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		printk(KERN_ERR DRV_NAME ": failed to retrieve IRQ\n");
+		err = -ENODEV;
+		goto out;
+	}
 
-	if (version_printed++ == 0)
-		printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+	if (!request_mem_region(base->start, resource_size(base), pdev->name)) {
+		printk(KERN_ERR DRV_NAME ": failed to request memory region for base registers\n");
+		err = -ENXIO;
+		goto out;
+	}
+
+	if (!request_mem_region(macen->start, resource_size(macen), pdev->name)) {
+		printk(KERN_ERR DRV_NAME ": failed to request memory region for MAC enable register\n");
+		err = -ENXIO;
+		goto err_request;
+	}
 
 	dev = alloc_etherdev(sizeof(struct au1000_private));
 	if (!dev) {
 		printk(KERN_ERR "%s: alloc_etherdev failed\n", DRV_NAME);
-		return NULL;
+		err = -ENOMEM;
+		goto err_alloc;
 	}
 
-	dev->base_addr = base;
-	dev->irq = irq;
-	dev->netdev_ops = &au1000_netdev_ops;
-	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-	dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
-	err = register_netdev(dev);
-	if (err != 0) {
-		printk(KERN_ERR "%s: Cannot register net device, error %d\n",
-				DRV_NAME, err);
-		free_netdev(dev);
-		return NULL;
-	}
-
-	printk("%s: Au1xx0 Ethernet found at 0x%x, irq %d\n",
-		dev->name, base, irq);
-
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
 	aup = netdev_priv(dev);
 
 	spin_lock_init(&aup->lock);
@@ -1115,21 +1060,29 @@ static struct net_device * au1000_probe(int port_num)
 						(NUM_TX_BUFFS + NUM_RX_BUFFS),
 						&aup->dma_addr,	0);
 	if (!aup->vaddr) {
-		free_netdev(dev);
-		release_mem_region( base, MAC_IOSIZE);
-		release_mem_region(macen, 4);
-		return NULL;
+		printk(KERN_ERR DRV_NAME ": failed to allocate data buffers\n");
+		err = -ENOMEM;
+		goto err_vaddr;
 	}
 
 	/* aup->mac is the base address of the MAC's registers */
-	aup->mac = (volatile mac_reg_t *)iflist[port_num].base_addr;
+	aup->mac = (volatile mac_reg_t *)ioremap_nocache(base->start, resource_size(base));
+	if (!aup->mac) {
+		printk(KERN_ERR DRV_NAME ": failed to ioremap MAC registers\n");
+		err = -ENXIO;
+		goto err_remap1;
+	}
 
-	/* Setup some variables for quick register address access */
-	aup->enable = (volatile u32 *)iflist[port_num].macen_addr;
-	aup->mac_id = port_num;
-	au_macs[port_num] = aup;
+        /* Setup some variables for quick register address access */
+	aup->enable = (volatile u32 *)ioremap_nocache(macen->start, resource_size(macen));
+	if (!aup->enable) {
+		printk(KERN_ERR DRV_NAME ": failed to ioremap MAC enable register\n");
+		err = -ENXIO;
+		goto err_remap2;
+	}
+	aup->mac_id = pdev->id;
 
-	if (port_num == 0) {
+	if (pdev->id == 0) {
 		if (prom_get_ethernet_addr(ethaddr) == 0)
 			memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
 		else {
@@ -1139,7 +1092,7 @@ static struct net_device * au1000_probe(int port_num)
 		}
 
 		setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-	} else if (port_num == 1)
+	} else if (pdev->id == 1)
 		setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
 
 	/*
@@ -1147,14 +1100,37 @@ static struct net_device * au1000_probe(int port_num)
 	 * to match those that are printed on their stickers
 	 */
 	memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
-	dev->dev_addr[5] += port_num;
+	dev->dev_addr[5] += pdev->id;
 
 	*aup->enable = 0;
 	aup->mac_enabled = 0;
 
+	pd = pdev->dev.platform_data;
+	if (!pd) {
+		printk(KERN_INFO DRV_NAME ": no platform_data passed, PHY search on MAC0\n");
+		aup->phy1_search_mac0 = 1;
+	} else {
+		aup->phy_static_config = pd->phy_static_config;
+		aup->phy_search_highest_addr = pd->phy_search_highest_addr;
+		aup->phy1_search_mac0 = pd->phy1_search_mac0;
+		aup->phy_addr = pd->phy_addr;
+		aup->phy_busid = pd->phy_busid;
+		aup->phy_irq = pd->phy_irq;
+	}
+
+	if (aup->phy_busid && aup->phy_busid > 0) {
+		printk(KERN_ERR DRV_NAME ": MAC0-associated PHY attached 2nd MACs MII"
+				"bus not supported yet\n");
+		err = -ENODEV;
+		goto err_mdiobus_alloc;
+	}
+
 	aup->mii_bus = mdiobus_alloc();
-	if (aup->mii_bus == NULL)
-		goto err_out;
+	if (aup->mii_bus == NULL) {
+		printk(KERN_ERR DRV_NAME ": failed to allocate mdiobus structure\n");
+		err = -ENOMEM;
+		goto err_mdiobus_alloc;
+	}
 
 	aup->mii_bus->priv = dev;
 	aup->mii_bus->read = au1000_mdiobus_read;
@@ -1168,23 +1144,19 @@ static struct net_device * au1000_probe(int port_num)
 
 	for(i = 0; i < PHY_MAX_ADDR; ++i)
 		aup->mii_bus->irq[i] = PHY_POLL;
-
 	/* if known, set corresponding PHY IRQs */
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
-# if defined(AU1XXX_PHY0_IRQ)
-	if (AU1XXX_PHY0_BUSID == aup->mac_id)
-		aup->mii_bus->irq[AU1XXX_PHY0_ADDR] = AU1XXX_PHY0_IRQ;
-# endif
-# if defined(AU1XXX_PHY1_IRQ)
-	if (AU1XXX_PHY1_BUSID == aup->mac_id)
-		aup->mii_bus->irq[AU1XXX_PHY1_ADDR] = AU1XXX_PHY1_IRQ;
-# endif
-#endif
-	mdiobus_register(aup->mii_bus);
+	if (aup->phy_static_config)
+		if (aup->phy_irq && aup->phy_busid == aup->mac_id)
+			aup->mii_bus->irq[aup->phy_addr] = aup->phy_irq;
+
+	err = mdiobus_register(aup->mii_bus);
+	if (err) {
+		printk(KERN_ERR DRV_NAME " failed to register MDIO bus\n");
+		goto err_mdiobus_reg;
+	}
 
-	if (mii_probe(dev) != 0) {
+	if (mii_probe(dev) != 0)
 		goto err_out;
-	}
 
 	pDBfree = NULL;
 	/* setup the data buffer descriptors and attach a buffer to each one */
@@ -1216,19 +1188,35 @@ static struct net_device * au1000_probe(int port_num)
 		aup->tx_db_inuse[i] = pDB;
 	}
 
+	dev->base_addr = base->start;
+	dev->irq = irq;
+	dev->netdev_ops = &au1000_netdev_ops;
+	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+	dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
 	/*
 	 * The boot code uses the ethernet controller, so reset it to start
 	 * fresh.  au1000_init() expects that the device is in reset state.
 	 */
 	reset_mac(dev);
 
-	return dev;
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR DRV_NAME "%s: Cannot register net device, aborting.\n",
+					dev->name);
+		goto err_out;
+	}
+
+	printk("%s: Au1xx0 Ethernet found at 0x%lx, irq %d\n",
+			dev->name, (unsigned long)base->start, irq);
+	if (version_printed++ == 0)
+		printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+
+	return 0;
 
 err_out:
-	if (aup->mii_bus != NULL) {
+	if (aup->mii_bus != NULL)
 		mdiobus_unregister(aup->mii_bus);
-		mdiobus_free(aup->mii_bus);
-	}
 
 	/* here we should have a valid dev plus aup-> register addresses
 	 * so we can reset the mac properly.*/
@@ -1242,67 +1230,84 @@ err_out:
 		if (aup->tx_db_inuse[i])
 			ReleaseDB(aup, aup->tx_db_inuse[i]);
 	}
+err_mdiobus_reg:
+	mdiobus_free(aup->mii_bus);
+err_mdiobus_alloc:
+	iounmap(aup->enable);
+err_remap2:
+	iounmap(aup->mac);
+err_remap1:
 	dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS),
 			     (void *)aup->vaddr, aup->dma_addr);
-	unregister_netdev(dev);
+err_vaddr:
 	free_netdev(dev);
-	release_mem_region( base, MAC_IOSIZE);
-	release_mem_region(macen, 4);
-	return NULL;
+err_alloc:
+	release_mem_region(macen->start, resource_size(macen));
+err_request:
+	release_mem_region(base->start, resource_size(base));
+out:
+	return err;
 }
 
-/*
- * Setup the base address and interrupt of the Au1xxx ethernet macs
- * based on cpu type and whether the interface is enabled in sys_pinfunc
- * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
- */
-static int __init au1000_init_module(void)
+static int __devexit au1000_remove(struct platform_device *pdev)
 {
-	int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
-	struct net_device *dev;
-	int i, found_one = 0;
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct au1000_private *aup = netdev_priv(dev);
+	int i;
+	struct resource *base, *macen;
 
-	num_ifs = NUM_ETH_INTERFACES - ni;
+	platform_set_drvdata(pdev, NULL);
+
+	unregister_netdev(dev);
+	mdiobus_unregister(aup->mii_bus);
+	mdiobus_free(aup->mii_bus);
+
+	for (i = 0; i < NUM_RX_DMA; i++)
+		if (aup->rx_db_inuse[i])
+			ReleaseDB(aup, aup->rx_db_inuse[i]);
+
+	for (i = 0; i < NUM_TX_DMA; i++)
+		if (aup->tx_db_inuse[i])
+			ReleaseDB(aup, aup->tx_db_inuse[i]);
+
+	dma_free_noncoherent(NULL, MAX_BUF_SIZE *
+			(NUM_TX_BUFFS + NUM_RX_BUFFS),
+			(void *)aup->vaddr, aup->dma_addr);
+
+	iounmap(aup->mac);
+	iounmap(aup->enable);
+
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(base->start, resource_size(base));
+
+	macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	release_mem_region(macen->start, resource_size(macen));
+
+	free_netdev(dev);
 
-	for(i = 0; i < num_ifs; i++) {
-		dev = au1000_probe(i);
-		iflist[i].dev = dev;
-		if (dev)
-			found_one++;
-	}
-	if (!found_one)
-		return -ENODEV;
 	return 0;
 }
 
-static void __exit au1000_cleanup_module(void)
+static struct platform_driver au1000_eth_driver = {
+	.probe  = au1000_probe,
+	.remove = __devexit_p(au1000_remove),
+	.driver = {
+		.name   = "au1000-eth",
+		.owner  = THIS_MODULE,
+	},
+};
+MODULE_ALIAS("platform:au1000-eth");
+
+
+static int __init au1000_init_module(void)
+{
+	return platform_driver_register(&au1000_eth_driver);
+}
+
+static void __exit au1000_exit_module(void)
 {
-	int i, j;
-	struct net_device *dev;
-	struct au1000_private *aup;
-
-	for (i = 0; i < num_ifs; i++) {
-		dev = iflist[i].dev;
-		if (dev) {
-			aup = netdev_priv(dev);
-			unregister_netdev(dev);
-			mdiobus_unregister(aup->mii_bus);
-			mdiobus_free(aup->mii_bus);
-			for (j = 0; j < NUM_RX_DMA; j++)
-				if (aup->rx_db_inuse[j])
-					ReleaseDB(aup, aup->rx_db_inuse[j]);
-			for (j = 0; j < NUM_TX_DMA; j++)
-				if (aup->tx_db_inuse[j])
-					ReleaseDB(aup, aup->tx_db_inuse[j]);
-			dma_free_noncoherent(NULL, MAX_BUF_SIZE *
-					     (NUM_TX_BUFFS + NUM_RX_BUFFS),
-					     (void *)aup->vaddr, aup->dma_addr);
-			release_mem_region(dev->base_addr, MAC_IOSIZE);
-			release_mem_region(CPHYSADDR(iflist[i].macen_addr), 4);
-			free_netdev(dev);
-		}
-	}
+	platform_driver_unregister(&au1000_eth_driver);
 }
 
 module_init(au1000_init_module);
-module_exit(au1000_cleanup_module);
+module_exit(au1000_exit_module);
diff --git a/drivers/net/au1000_eth.h b/drivers/net/au1000_eth.h
index 824ecd5ff3a8..f9d29a29b8fd 100644
--- a/drivers/net/au1000_eth.h
+++ b/drivers/net/au1000_eth.h
@@ -108,6 +108,15 @@ struct au1000_private {
 	struct phy_device *phy_dev;
 	struct mii_bus *mii_bus;
 
+	/* PHY configuration */
+	int phy_static_config;
+	int phy_search_highest_addr;
+	int phy1_search_mac0;
+
+	int phy_addr;
+	int phy_busid;
+	int phy_irq;
+
 	/* These variables are just for quick access to certain regs addresses. */
 	volatile mac_reg_t *mac;  /* mac registers                      */
 	volatile u32 *enable;     /* address of MAC Enable Register     */
-- 
cgit v1.2.3


From 780019ddf02f214ad61e641b57b8ac30c837e2a7 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 27 Jan 2010 09:10:06 +0100
Subject: MIPS: AR7: Implement clock API

This patch makes the ar7 clock code implement the Linux clk API. Drivers
using the various clocks available in the SoC are updated accordingly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
To: linux-mips@linux-mips.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Patchwork: http://patchwork.linux-mips.org/patch/881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/clock.c                | 109 +++++++++++++++++++++++++----------
 arch/mips/ar7/platform.c             |  10 +++-
 arch/mips/ar7/time.c                 |  12 +++-
 arch/mips/include/asm/mach-ar7/ar7.h |  23 +-------
 drivers/net/cpmac.c                  |  10 +++-
 drivers/watchdog/ar7_wdt.c           |  18 +++++-
 6 files changed, 126 insertions(+), 56 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index cc65c8eb391b..fc0e7154e8d6 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +25,8 @@
 #include <linux/delay.h>
 #include <linux/gcd.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -94,12 +97,16 @@ struct tnetd7200_clocks {
 	struct tnetd7200_clock usb;
 };
 
-int ar7_cpu_clock = 150000000;
-EXPORT_SYMBOL(ar7_cpu_clock);
-int ar7_bus_clock = 125000000;
-EXPORT_SYMBOL(ar7_bus_clock);
-int ar7_dsp_clock;
-EXPORT_SYMBOL(ar7_dsp_clock);
+static struct clk bus_clk = {
+	.rate	= 125000000,
+};
+
+static struct clk cpu_clk = {
+	.rate	= 150000000,
+};
+
+static struct clk dsp_clk;
+static struct clk vbus_clk;
 
 static void approximate(int base, int target, int *prediv,
 			int *postdiv, int *mul)
@@ -185,7 +192,7 @@ static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
 		base_clock = AR7_XTAL_CLOCK;
 		break;
 	case BOOT_PLL_SOURCE_CPU:
-		base_clock = ar7_cpu_clock;
+		base_clock = cpu_clk.rate;
 		break;
 	}
 
@@ -212,11 +219,11 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	u32 *bootcr, u32 frequency)
 {
 	int prediv, postdiv, mul;
-	int base_clock = ar7_bus_clock;
+	int base_clock = bus_clk.rate;
 
 	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
 	case BOOT_PLL_SOURCE_BUS:
-		base_clock = ar7_bus_clock;
+		base_clock = bus_clk.rate;
 		break;
 	case BOOT_PLL_SOURCE_REF:
 		base_clock = AR7_REF_CLOCK;
@@ -225,7 +232,7 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 		base_clock = AR7_XTAL_CLOCK;
 		break;
 	case BOOT_PLL_SOURCE_CPU:
-		base_clock = ar7_cpu_clock;
+		base_clock = cpu_clk.rate;
 		break;
 	}
 
@@ -247,18 +254,18 @@ static void __init tnetd7300_init_clocks(void)
 					ioremap_nocache(UR8_REGS_CLOCKS,
 					sizeof(struct tnetd7300_clocks));
 
-	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+	bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
 		&clocks->bus, bootcr, AR7_AFE_CLOCK);
 
 	if (*bootcr & BOOT_PLL_ASYNC_MODE)
-		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+		cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
 			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
 	else
-		ar7_cpu_clock = ar7_bus_clock;
+		cpu_clk.rate = bus_clk.rate;
 
-	if (ar7_dsp_clock == 250000000)
+	if (dsp_clk.rate == 250000000)
 		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
-			bootcr, ar7_dsp_clock);
+			bootcr, dsp_clk.rate);
 
 	iounmap(clocks);
 	iounmap(bootcr);
@@ -343,20 +350,20 @@ static void __init tnetd7200_init_clocks(void)
 		printk(KERN_INFO "Clocks: Setting DSP clock\n");
 		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
 			&dsp_prediv, &dsp_postdiv, &dsp_mul);
-		ar7_bus_clock =
+		bus_clk.rate =
 			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
 		tnetd7200_set_clock(dsp_base, &clocks->dsp,
 			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
-			ar7_bus_clock);
+			bus_clk.rate);
 
 		printk(KERN_INFO "Clocks: Setting CPU clock\n");
 		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
 			&cpu_postdiv, &cpu_mul);
-		ar7_cpu_clock =
+		cpu_clk.rate =
 			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
 		tnetd7200_set_clock(cpu_base, &clocks->cpu,
 			cpu_prediv, cpu_postdiv, -1, cpu_mul,
-			ar7_cpu_clock);
+			cpu_clk.rate);
 
 	} else
 		if (*bootcr & BOOT_PLL_2TO1_MODE) {
@@ -365,48 +372,90 @@ static void __init tnetd7200_init_clocks(void)
 			printk(KERN_INFO "Clocks: Setting CPU clock\n");
 			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
 				&cpu_postdiv, &cpu_mul);
-			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+			cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul)
 								/ cpu_postdiv;
 			tnetd7200_set_clock(cpu_base, &clocks->cpu,
 				cpu_prediv, cpu_postdiv, -1, cpu_mul,
-				ar7_cpu_clock);
+				cpu_clk.rate);
 
 			printk(KERN_INFO "Clocks: Setting DSP clock\n");
 			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
 				&dsp_postdiv, &dsp_mul);
-			ar7_bus_clock = ar7_cpu_clock / 2;
+			bus_clk.rate = cpu_clk.rate / 2;
 			tnetd7200_set_clock(dsp_base, &clocks->dsp,
 				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
-				dsp_mul * 2, ar7_bus_clock);
+				dsp_mul * 2, bus_clk.rate);
 		} else {
 			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
 
 			printk(KERN_INFO "Clocks: Setting DSP clock\n");
 			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
 				&dsp_postdiv, &dsp_mul);
-			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+			bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul)
 								/ dsp_postdiv;
 			tnetd7200_set_clock(dsp_base, &clocks->dsp,
 				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
-				dsp_mul * 2, ar7_bus_clock);
+				dsp_mul * 2, bus_clk.rate);
 
-			ar7_cpu_clock = ar7_bus_clock;
+			cpu_clk.rate = bus_clk.rate;
 		}
 
 	printk(KERN_INFO "Clocks: Setting USB clock\n");
-	usb_base = ar7_bus_clock;
+	usb_base = bus_clk.rate;
 	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
 		&usb_postdiv, &usb_mul);
 	tnetd7200_set_clock(usb_base, &clocks->usb,
 		usb_prediv, usb_postdiv, -1, usb_mul,
 		TNETD7200_DEF_USB_CLK);
 
-	ar7_dsp_clock = ar7_cpu_clock;
+	dsp_clk.rate = cpu_clk.rate;
 
 	iounmap(clocks);
 	iounmap(bootcr);
 }
 
+/*
+ * Linux clock API
+ */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "bus"))
+		return &bus_clk;
+	/* cpmac and vbus share the same rate */
+	if (!strcmp(id, "cpmac"))
+		return &vbus_clk;
+	if (!strcmp(id, "cpu"))
+		return &cpu_clk;
+	if (!strcmp(id, "dsp"));
+		return &dsp_clk;
+	if (!strcmp(id, "vbus"))
+		return &vbus_clk;
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
 int __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
@@ -415,12 +464,14 @@ int __init ar7_init_clocks(void)
 		tnetd7200_init_clocks();
 		break;
 	case AR7_CHIP_7300:
-		ar7_dsp_clock = tnetd7300_dsp_clock();
+		dsp_clk.rate = tnetd7300_dsp_clock();
 		tnetd7300_init_clocks();
 		break;
 	default:
 		break;
 	}
+	/* adjust vbus clock rate */
+	vbus_clk.rate = bus_clk.rate / 2;
 
 	return 0;
 }
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 5a3fa9407710..1db191cd49c3 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -35,6 +35,7 @@
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -507,13 +508,18 @@ static int __init ar7_register_devices(void)
 	u32 *bootcr, val;
 #ifdef CONFIG_SERIAL_8250
 	static struct uart_port uart_port[2] __initdata;
+	struct clk *bus_clk;
 
 	memset(uart_port, 0, sizeof(struct uart_port) * 2);
 
+	bus_clk = clk_get(NULL, "bus");
+	if (IS_ERR(bus_clk))
+		panic("unable to get bus clk\n");
+
 	uart_port[0].type = PORT_16550A;
 	uart_port[0].line = 0;
 	uart_port[0].irq = AR7_IRQ_UART0;
-	uart_port[0].uartclk = ar7_bus_freq() / 2;
+	uart_port[0].uartclk = clk_get_rate(bus_clk) / 2;
 	uart_port[0].iotype = UPIO_MEM32;
 	uart_port[0].mapbase = AR7_REGS_UART0;
 	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
@@ -528,7 +534,7 @@ static int __init ar7_register_devices(void)
 		uart_port[1].type = PORT_16550A;
 		uart_port[1].line = 1;
 		uart_port[1].irq = AR7_IRQ_UART1;
-		uart_port[1].uartclk = ar7_bus_freq() / 2;
+		uart_port[1].uartclk = clk_get_rate(bus_clk) / 2;
 		uart_port[1].iotype = UPIO_MEM32;
 		uart_port[1].mapbase = UR8_REGS_UART1;
 		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
index a1fba894daa2..5fb8a0134085 100644
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@@ -20,11 +20,21 @@
 
 #include <linux/init.h>
 #include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/time.h>
 #include <asm/mach-ar7/ar7.h>
 
 void __init plat_time_init(void)
 {
-	mips_hpt_frequency = ar7_cpu_freq() / 2;
+	struct clk *cpu_clk;
+
+	cpu_clk = clk_get(NULL, "cpu");
+	if (IS_ERR(cpu_clk)) {
+		printk(KERN_ERR "unable to get cpu clock\n");
+		return;
+	}
+
+	mips_hpt_frequency = clk_get_rate(cpu_clk) / 2;
 }
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index 21cbbc706448..f1cf38943497 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -105,26 +105,9 @@ static inline u8 ar7_chip_rev(void)
 	return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
 }
 
-static inline int ar7_cpu_freq(void)
-{
-	return ar7_cpu_clock;
-}
-
-static inline int ar7_bus_freq(void)
-{
-	return ar7_bus_clock;
-}
-
-static inline int ar7_vbus_freq(void)
-{
-	return ar7_bus_clock / 2;
-}
-#define ar7_cpmac_freq ar7_vbus_freq
-
-static inline int ar7_dsp_freq(void)
-{
-	return ar7_dsp_clock;
-}
+struct clk {
+	unsigned int	rate;
+};
 
 static inline int ar7_has_high_cpmac(void)
 {
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 8d0be26f94e3..bf2072e54200 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -36,6 +36,7 @@
 #include <linux/phy_fixed.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk.h>
 #include <asm/gpio.h>
 #include <asm/atomic.h>
 
@@ -294,9 +295,16 @@ static int cpmac_mdio_write(struct mii_bus *bus, int phy_id,
 
 static int cpmac_mdio_reset(struct mii_bus *bus)
 {
+	struct clk *cpmac_clk;
+
+	cpmac_clk = clk_get(&bus->dev, "cpmac");
+	if (IS_ERR(cpmac_clk)) {
+		printk(KERN_ERR "unable to get cpmac clock\n");
+		return -1;
+	}
 	ar7_device_reset(AR7_RESET_BIT_MDIO);
 	cpmac_write(bus->priv, CPMAC_MDIO_CONTROL, MDIOC_ENABLE |
-		    MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1));
+		    MDIOC_CLKDIV(clk_get_rate(cpmac_clk) / 2200000 - 1));
 	return 0;
 }
 
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2e94b71b20d9..2bb95cd308c1 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -34,6 +34,7 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -80,6 +81,8 @@ static struct resource *ar7_regs_wdt;
 /* Pointer to the remapped WDT IO space */
 static struct ar7_wdt *ar7_wdt;
 
+static struct clk *vbus_clk;
+
 static void ar7_wdt_kick(u32 value)
 {
 	WRITE_REG(ar7_wdt->kick_lock, 0x5555);
@@ -138,17 +141,19 @@ static void ar7_wdt_disable(u32 value)
 static void ar7_wdt_update_margin(int new_margin)
 {
 	u32 change;
+	u32 vbus_rate;
 
-	change = new_margin * (ar7_vbus_freq() / prescale_value);
+	vbus_rate = clk_get_rate(vbus_clk);
+	change = new_margin * (vbus_rate / prescale_value);
 	if (change < 1)
 		change = 1;
 	if (change > 0xffff)
 		change = 0xffff;
 	ar7_wdt_change(change);
-	margin = change * prescale_value / ar7_vbus_freq();
+	margin = change * prescale_value / vbus_rate;
 	printk(KERN_INFO DRVNAME
 	       ": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
-	       margin, prescale_value, change, ar7_vbus_freq());
+	       margin, prescale_value, change, vbus_rate);
 }
 
 static void ar7_wdt_enable_wdt(void)
@@ -298,6 +303,13 @@ static int __devinit ar7_wdt_probe(struct platform_device *pdev)
 		goto out_mem_region;
 	}
 
+	vbus_clk = clk_get(NULL, "vbus");
+	if (IS_ERR(vbus_clk)) {
+		printk(KERN_ERR DRVNAME ": could not get vbus clock\n");
+		rc = PTR_ERR(vbus_clk);
+		goto out_mem_region;
+	}
+
 	ar7_wdt_disable_wdt();
 	ar7_wdt_prescale(prescale_value);
 	ar7_wdt_update_margin(margin);
-- 
cgit v1.2.3


From eeb9c182a6ad8bc130377adb0a4cd7b95dd15f49 Mon Sep 17 00:00:00 2001
From: Finn Thain <fthain@telegraphics.com.au>
Date: Wed, 4 Nov 2009 00:42:02 +1100
Subject: mac68k: move macsonic and macmace platform devices

Move platform device code from the drivers to the platform init function.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/mac/config.c | 23 +++++++++++++++++++++++
 drivers/net/macmace.c  | 33 ++++-----------------------------
 drivers/net/macsonic.c | 33 ++++-----------------------------
 3 files changed, 31 insertions(+), 58 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 91245ade2290..816452b3e50f 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -921,6 +921,16 @@ static struct platform_device esp_1_pdev = {
 	.id		= 1,
 };
 
+static struct platform_device sonic_pdev = {
+	.name		= "macsonic",
+	.id		= -1,
+};
+
+static struct platform_device mace_pdev = {
+	.name		= "macmace",
+	.id		= -1,
+};
+
 int __init mac_platform_init(void)
 {
 	u8 *swim_base;
@@ -971,6 +981,19 @@ int __init mac_platform_init(void)
 		break;
 	}
 
+	/*
+	 * Ethernet device
+	 */
+
+	switch (macintosh_config->ether_type) {
+	case MAC_ETHER_SONIC:
+		platform_device_register(&sonic_pdev);
+		break;
+	case MAC_ETHER_MACE:
+		platform_device_register(&mace_pdev);
+		break;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index 44f3c2896f20..79408c377875 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -39,7 +39,6 @@
 #include "mace.h"
 
 static char mac_mace_string[] = "macmace";
-static struct platform_device *mac_mace_device;
 
 #define N_TX_BUFF_ORDER	0
 #define N_TX_RING	(1 << N_TX_BUFF_ORDER)
@@ -752,6 +751,7 @@ static irqreturn_t mace_dma_intr(int irq, void *dev_id)
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Macintosh MACE ethernet driver");
+MODULE_ALIAS("platform:macmace");
 
 static int __devexit mac_mace_device_remove (struct platform_device *pdev)
 {
@@ -777,47 +777,22 @@ static struct platform_driver mac_mace_driver = {
 	.probe  = mace_probe,
 	.remove = __devexit_p(mac_mace_device_remove),
 	.driver	= {
-		.name = mac_mace_string,
+		.name	= mac_mace_string,
+		.owner	= THIS_MODULE,
 	},
 };
 
 static int __init mac_mace_init_module(void)
 {
-	int err;
-
 	if (!MACH_IS_MAC)
 		return -ENODEV;
 
-	if ((err = platform_driver_register(&mac_mace_driver))) {
-		printk(KERN_ERR "Driver registration failed\n");
-		return err;
-	}
-
-	mac_mace_device = platform_device_alloc(mac_mace_string, 0);
-	if (!mac_mace_device)
-		goto out_unregister;
-
-	if (platform_device_add(mac_mace_device)) {
-		platform_device_put(mac_mace_device);
-		mac_mace_device = NULL;
-	}
-
-	return 0;
-
-out_unregister:
-	platform_driver_unregister(&mac_mace_driver);
-
-	return -ENOMEM;
+	return platform_driver_register(&mac_mace_driver);
 }
 
 static void __exit mac_mace_cleanup_module(void)
 {
 	platform_driver_unregister(&mac_mace_driver);
-
-	if (mac_mace_device) {
-		platform_device_unregister(mac_mace_device);
-		mac_mace_device = NULL;
-	}
 }
 
 module_init(mac_mace_init_module);
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index 875d361fb79d..24109c288108 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -62,7 +62,6 @@
 #include <asm/mac_via.h>
 
 static char mac_sonic_string[] = "macsonic";
-static struct platform_device *mac_sonic_device;
 
 #include "sonic.h"
 
@@ -607,6 +606,7 @@ out:
 MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
 module_param(sonic_debug, int, 0);
 MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
+MODULE_ALIAS("platform:macsonic");
 
 #include "sonic.c"
 
@@ -627,44 +627,19 @@ static struct platform_driver mac_sonic_driver = {
 	.probe  = mac_sonic_probe,
 	.remove = __devexit_p(mac_sonic_device_remove),
 	.driver	= {
-		.name = mac_sonic_string,
+		.name	= mac_sonic_string,
+		.owner	= THIS_MODULE,
 	},
 };
 
 static int __init mac_sonic_init_module(void)
 {
-	int err;
-
-	if ((err = platform_driver_register(&mac_sonic_driver))) {
-		printk(KERN_ERR "Driver registration failed\n");
-		return err;
-	}
-
-	mac_sonic_device = platform_device_alloc(mac_sonic_string, 0);
-	if (!mac_sonic_device)
-		goto out_unregister;
-
-	if (platform_device_add(mac_sonic_device)) {
-		platform_device_put(mac_sonic_device);
-		mac_sonic_device = NULL;
-	}
-
-	return 0;
-
-out_unregister:
-	platform_driver_unregister(&mac_sonic_driver);
-
-	return -ENOMEM;
+	return platform_driver_register(&mac_sonic_driver);
 }
 
 static void __exit mac_sonic_cleanup_module(void)
 {
 	platform_driver_unregister(&mac_sonic_driver);
-
-	if (mac_sonic_device) {
-		platform_device_unregister(mac_sonic_device);
-		mac_sonic_device = NULL;
-	}
 }
 
 module_init(mac_sonic_init_module);
-- 
cgit v1.2.3


From a2ce766238f72ff7337606c0bc96803c30c9e05c Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:39 +0000
Subject: pci: Add PCI LRDT tag size and section size

This patch adds a preprocessor constant to describe the PCI VPD large
resource data type tag size and an inline function to extract the large
resource section size from the large resource data type tag.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c  |  8 +++++---
 drivers/net/tg3.c   | 13 ++++++-------
 include/linux/pci.h | 14 ++++++++++++++
 3 files changed, 25 insertions(+), 10 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d3f739a295df..bb403887b549 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7773,15 +7773,17 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 		unsigned int block_end;
 
 		if (val == 0x82 || val == 0x91) {
-			i = (i + 3 + (data[i + 1] + (data[i + 2] << 8)));
+			i += PCI_VPD_LRDT_TAG_SIZE +
+			     pci_vpd_lrdt_size(&data[i]);
 			continue;
 		}
 
 		if (val != 0x90)
 			goto vpd_done;
 
-		block_end = (i + 3 + (data[i + 1] + (data[i + 2] << 8)));
-		i += 3;
+		block_end = (i + PCI_VPD_LRDT_TAG_SIZE +
+			    pci_vpd_lrdt_size(&data[i]));
+		i += PCI_VPD_LRDT_TAG_SIZE;
 
 		if (block_end > BNX2_VPD_LEN)
 			goto vpd_done;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0d06e4007f44..5fccbe459949 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12590,19 +12590,18 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 		unsigned int block_end;
 
 		if (val == 0x82 || val == 0x91) {
-			i = (i + 3 +
-			     (vpd_data[i + 1] +
-			      (vpd_data[i + 2] << 8)));
+			i += PCI_VPD_LRDT_TAG_SIZE +
+			     pci_vpd_lrdt_size(&vpd_data[i]);
 			continue;
 		}
 
 		if (val != 0x90)
 			goto out_not_found;
 
-		block_end = (i + 3 +
-			     (vpd_data[i + 1] +
-			      (vpd_data[i + 2] << 8)));
-		i += 3;
+		block_end = i + PCI_VPD_LRDT_TAG_SIZE +
+			    pci_vpd_lrdt_size(&vpd_data[i]);
+
+		i += PCI_VPD_LRDT_TAG_SIZE;
 
 		if (block_end > TG3_NVM_VPD_LEN)
 			goto out_not_found;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e2575f86133a..6f62a499023f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1349,5 +1349,19 @@ static inline bool pci_is_pcie(struct pci_dev *dev)
 
 void pci_request_acs(void);
 
+
+#define PCI_VPD_LRDT_TAG_SIZE	3
+
+/**
+ * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
+ * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
+ *
+ * Returns the extracted Large Resource Data Type length.
+ */
+static inline u16 pci_vpd_lrdt_size(const u8 *lrdt)
+{
+	return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
+}
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
-- 
cgit v1.2.3


From 7ad506fa1adc2da3d394c562f09b8e1b3026c402 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:40 +0000
Subject: pci: Add large and small resource data type code

This patch introduces more VPD preprocessor definitions to identify some
small and large resource data type item names.  The patch then continues
to correct how the tg3 and bnx2 drivers search for the "read-only data"
large resource data type.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c  | 23 +++++++++++++++++------
 drivers/net/tg3.c   | 23 +++++++++++++++++------
 include/linux/pci.h | 34 +++++++++++++++++++++++++++++++++-
 3 files changed, 67 insertions(+), 13 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index bb403887b549..084ef102b8c4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7772,15 +7772,26 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 		unsigned char val = data[i];
 		unsigned int block_end;
 
-		if (val == 0x82 || val == 0x91) {
-			i += PCI_VPD_LRDT_TAG_SIZE +
-			     pci_vpd_lrdt_size(&data[i]);
+		if (val & PCI_VPD_LRDT) {
+			if (i + PCI_VPD_LRDT_TAG_SIZE > BNX2_VPD_LEN)
+				break;
+
+			if (val != PCI_VPD_LRDT_RO_DATA) {
+				i += PCI_VPD_LRDT_TAG_SIZE +
+				     pci_vpd_lrdt_size(&data[i]);
+
+				continue;
+			}
+		} else {
+			if ((val & PCI_VPD_SRDT_TIN_MASK) == PCI_VPD_STIN_END)
+				break;
+
+			i += PCI_VPD_SRDT_TAG_SIZE +
+			     pci_vpd_srdt_size(&data[i]);
+
 			continue;
 		}
 
-		if (val != 0x90)
-			goto vpd_done;
-
 		block_end = (i + PCI_VPD_LRDT_TAG_SIZE +
 			    pci_vpd_lrdt_size(&data[i]));
 		i += PCI_VPD_LRDT_TAG_SIZE;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5fccbe459949..ed57a62b3ac8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12589,15 +12589,26 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 		unsigned char val = vpd_data[i];
 		unsigned int block_end;
 
-		if (val == 0x82 || val == 0x91) {
-			i += PCI_VPD_LRDT_TAG_SIZE +
-			     pci_vpd_lrdt_size(&vpd_data[i]);
+		if (val & PCI_VPD_LRDT) {
+			if (i + PCI_VPD_LRDT_TAG_SIZE > TG3_NVM_VPD_LEN)
+				break;
+
+			if (val != PCI_VPD_LRDT_RO_DATA) {
+				i += PCI_VPD_LRDT_TAG_SIZE +
+				     pci_vpd_lrdt_size(&vpd_data[i]);
+
+				continue;
+			}
+		} else {
+			if ((val & PCI_VPD_SRDT_TIN_MASK) == PCI_VPD_STIN_END)
+				break;
+
+			i += PCI_VPD_SRDT_TAG_SIZE +
+			     pci_vpd_srdt_size(&vpd_data[i]);
+
 			continue;
 		}
 
-		if (val != 0x90)
-			goto out_not_found;
-
 		block_end = i + PCI_VPD_LRDT_TAG_SIZE +
 			    pci_vpd_lrdt_size(&vpd_data[i]);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6f62a499023f..198d062640b7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1350,7 +1350,28 @@ static inline bool pci_is_pcie(struct pci_dev *dev)
 void pci_request_acs(void);
 
 
-#define PCI_VPD_LRDT_TAG_SIZE	3
+#define PCI_VPD_LRDT			0x80	/* Large Resource Data Type */
+#define PCI_VPD_LRDT_ID(x)		(x | PCI_VPD_LRDT)
+
+/* Large Resource Data Type Tag Item Names */
+#define PCI_VPD_LTIN_ID_STRING		0x02	/* Identifier String */
+#define PCI_VPD_LTIN_RO_DATA		0x10	/* Read-Only Data */
+#define PCI_VPD_LTIN_RW_DATA		0x11	/* Read-Write Data */
+
+#define PCI_VPD_LRDT_ID_STRING		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_ID_STRING)
+#define PCI_VPD_LRDT_RO_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RO_DATA)
+#define PCI_VPD_LRDT_RW_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA)
+
+/* Small Resource Data Type Tag Item Names */
+#define PCI_VPD_STIN_END		0x78	/* End */
+
+#define PCI_VPD_SRDT_END		PCI_VPD_STIN_END
+
+#define PCI_VPD_SRDT_TIN_MASK		0x78
+#define PCI_VPD_SRDT_LEN_MASK		0x07
+
+#define PCI_VPD_LRDT_TAG_SIZE		3
+#define PCI_VPD_SRDT_TAG_SIZE		1
 
 /**
  * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
@@ -1363,5 +1384,16 @@ static inline u16 pci_vpd_lrdt_size(const u8 *lrdt)
 	return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
 }
 
+/**
+ * pci_vpd_srdt_size - Extracts the Small Resource Data Type length
+ * @lrdt: Pointer to the beginning of the Small Resource Data Type tag
+ *
+ * Returns the extracted Small Resource Data Type length.
+ */
+static inline u8 pci_vpd_srdt_size(const u8 *srdt)
+{
+	return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
+}
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
-- 
cgit v1.2.3


From b55ac1b22690d2e5b02a61cf6d69c2d66969c79d Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:41 +0000
Subject: pci: Add helper to find a VPD resource data type

This patch adds the pci_vpd_find_tag() helper function to find VPD
resource data types in a buffer.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c   | 24 ++++--------------------
 drivers/net/tg3.c    | 26 +++++---------------------
 drivers/pci/Makefile |  2 +-
 drivers/pci/vpd.c    | 43 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci.h  | 12 ++++++++++++
 5 files changed, 65 insertions(+), 42 deletions(-)
 create mode 100644 drivers/pci/vpd.c

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 084ef102b8c4..fd43feb5a350 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7769,28 +7769,12 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 	}
 
 	for (i = 0; i <= BNX2_VPD_LEN - 3; ) {
-		unsigned char val = data[i];
 		unsigned int block_end;
 
-		if (val & PCI_VPD_LRDT) {
-			if (i + PCI_VPD_LRDT_TAG_SIZE > BNX2_VPD_LEN)
-				break;
-
-			if (val != PCI_VPD_LRDT_RO_DATA) {
-				i += PCI_VPD_LRDT_TAG_SIZE +
-				     pci_vpd_lrdt_size(&data[i]);
-
-				continue;
-			}
-		} else {
-			if ((val & PCI_VPD_SRDT_TIN_MASK) == PCI_VPD_STIN_END)
-				break;
-
-			i += PCI_VPD_SRDT_TAG_SIZE +
-			     pci_vpd_srdt_size(&data[i]);
-
-			continue;
-		}
+		i = pci_vpd_find_tag(data, i, BNX2_VPD_LEN,
+				     PCI_VPD_LRDT_RO_DATA);
+		if (i < 0)
+			break;
 
 		block_end = (i + PCI_VPD_LRDT_TAG_SIZE +
 			    pci_vpd_lrdt_size(&data[i]));
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ed57a62b3ac8..76ad141ab448 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12547,7 +12547,7 @@ skip_phy_reset:
 static void __devinit tg3_read_partno(struct tg3 *tp)
 {
 	unsigned char vpd_data[TG3_NVM_VPD_LEN];   /* in little-endian format */
-	unsigned int i;
+	int i;
 	u32 magic;
 
 	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
@@ -12586,28 +12586,12 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 
 	/* Now parse and find the part number. */
 	for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) {
-		unsigned char val = vpd_data[i];
 		unsigned int block_end;
 
-		if (val & PCI_VPD_LRDT) {
-			if (i + PCI_VPD_LRDT_TAG_SIZE > TG3_NVM_VPD_LEN)
-				break;
-
-			if (val != PCI_VPD_LRDT_RO_DATA) {
-				i += PCI_VPD_LRDT_TAG_SIZE +
-				     pci_vpd_lrdt_size(&vpd_data[i]);
-
-				continue;
-			}
-		} else {
-			if ((val & PCI_VPD_SRDT_TIN_MASK) == PCI_VPD_STIN_END)
-				break;
-
-			i += PCI_VPD_SRDT_TAG_SIZE +
-			     pci_vpd_srdt_size(&vpd_data[i]);
-
-			continue;
-		}
+		i = pci_vpd_find_tag(vpd_data, i, TG3_NVM_VPD_LEN,
+				     PCI_VPD_LRDT_RO_DATA);
+		if (i < 0)
+			break;
 
 		block_end = i + PCI_VPD_LRDT_TAG_SIZE +
 			    pci_vpd_lrdt_size(&vpd_data[i]);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4df48d58eaa6..b2f6d777a084 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -4,7 +4,7 @@
 
 obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
-			irq.o
+			irq.o vpd.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_SYSFS) += slot.o
 
diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
new file mode 100644
index 000000000000..6bc554576f8d
--- /dev/null
+++ b/drivers/pci/vpd.c
@@ -0,0 +1,43 @@
+/*
+ * File:	vpd.c
+ * Purpose:	Provide PCI VPD support
+ *
+ * Copyright (C) 2010 Broadcom Corporation.
+ */
+
+#include <linux/pci.h>
+
+int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt)
+{
+	int i;
+
+	for (i = off; i < len; ) {
+		u8 val = buf[i];
+
+		if (val & PCI_VPD_LRDT) {
+			/* Don't return success of the tag isn't complete */
+			if (i + PCI_VPD_LRDT_TAG_SIZE > len)
+				break;
+
+			if (val == rdt)
+				return i;
+
+			i += PCI_VPD_LRDT_TAG_SIZE +
+			     pci_vpd_lrdt_size(&buf[i]);
+		} else {
+			u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK;
+
+			if (tag == rdt)
+				return i;
+
+			if (tag == PCI_VPD_SRDT_END)
+				break;
+
+			i += PCI_VPD_SRDT_TAG_SIZE +
+			     pci_vpd_srdt_size(&buf[i]);
+		}
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_find_tag);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 198d062640b7..e30ceea7345b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1395,5 +1395,17 @@ static inline u8 pci_vpd_srdt_size(const u8 *srdt)
 	return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
 }
 
+/**
+ * pci_vpd_find_tag - Locates the Resource Data Type tag provided
+ * @buf: Pointer to buffered vpd data
+ * @off: The offset into the buffer at which to begin the search
+ * @len: The length of the vpd buffer
+ * @rdt: The Resource Data Type to search for
+ *
+ * Returns the index where the Resource Data Type was found or
+ * -ENOENT otherwise.
+ */
+int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
-- 
cgit v1.2.3


From e1d5bdabb94da89bdb3c3f2ee105cf61fca88ec8 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:42 +0000
Subject: pci: Add VPD information field helper functions

This patch adds a preprocessor constant to describe the PCI VPD
information field header size and an inline function to extract the
size of the information field itself.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c  | 11 ++++++-----
 drivers/net/tg3.c   |  7 ++++---
 include/linux/pci.h | 13 +++++++++++++
 3 files changed, 23 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index fd43feb5a350..b808707f83ff 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7784,14 +7784,15 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 			goto vpd_done;
 
 		while (i < (block_end - 2)) {
-			int len = data[i + 2];
+			int len = pci_vpd_info_field_size(&data[i]);
 
-			if (i + 3 + len > block_end)
+			if (i + PCI_VPD_INFO_FLD_HDR_SIZE + len > block_end)
 				goto vpd_done;
 
 			if (data[i] == 'M' && data[i + 1] == 'N') {
 				if (len != 4 ||
-				    memcmp(&data[i + 3], "1028", 4))
+				    memcmp(&data[i + PCI_VPD_INFO_FLD_HDR_SIZE],
+					   "1028", 4))
 					goto vpd_done;
 				mn_match = true;
 
@@ -7800,9 +7801,9 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 					goto vpd_done;
 
 				v0_len = len;
-				v0_str = &data[i + 3];
+				v0_str = &data[i + PCI_VPD_INFO_FLD_HDR_SIZE];
 			}
-			i += 3 + len;
+			i += PCI_VPD_INFO_FLD_HDR_SIZE + len;
 
 			if (mn_match && v0_str) {
 				memcpy(bp->fw_version, v0_str, v0_len);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 76ad141ab448..f59f36910e98 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12604,9 +12604,9 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 		while (i < (block_end - 2)) {
 			if (vpd_data[i + 0] == 'P' &&
 			    vpd_data[i + 1] == 'N') {
-				int partno_len = vpd_data[i + 2];
+				int partno_len = pci_vpd_info_field_size(&vpd_data[i]);
 
-				i += 3;
+				i += PCI_VPD_INFO_FLD_HDR_SIZE;
 				if (partno_len > TG3_BPN_SIZE ||
 				    (partno_len + i) > TG3_NVM_VPD_LEN)
 					goto out_not_found;
@@ -12617,7 +12617,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 				/* Success. */
 				return;
 			}
-			i += 3 + vpd_data[i + 2];
+			i += PCI_VPD_INFO_FLD_HDR_SIZE +
+			     pci_vpd_info_field_size(&vpd_data[i]);
 		}
 
 		/* Part number not found. */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e30ceea7345b..cfff32fc6e35 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1373,6 +1373,8 @@ void pci_request_acs(void);
 #define PCI_VPD_LRDT_TAG_SIZE		3
 #define PCI_VPD_SRDT_TAG_SIZE		1
 
+#define PCI_VPD_INFO_FLD_HDR_SIZE	3
+
 /**
  * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
  * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
@@ -1395,6 +1397,17 @@ static inline u8 pci_vpd_srdt_size(const u8 *srdt)
 	return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
 }
 
+/**
+ * pci_vpd_info_field_size - Extracts the information field length
+ * @lrdt: Pointer to the beginning of an information field header
+ *
+ * Returns the extracted information field length.
+ */
+static inline u8 pci_vpd_info_field_size(const u8 *info_field)
+{
+	return info_field[2];
+}
+
 /**
  * pci_vpd_find_tag - Locates the Resource Data Type tag provided
  * @buf: Pointer to buffered vpd data
-- 
cgit v1.2.3


From 4067a8541d397e9d6b443dd2ce0ecb78bfd991db Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:43 +0000
Subject: pci: Add helper to search for VPD keywords

This patch adds the pci_vpd_find_info_keyword() helper function to
find information field keywords within read-only and read-write large
resource data type sections.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c  | 54 +++++++++++++++++++++++++++++------------------------
 drivers/net/tg3.c   | 32 +++++++++++++------------------
 drivers/pci/vpd.c   | 18 ++++++++++++++++++
 include/linux/pci.h | 17 +++++++++++++++++
 4 files changed, 78 insertions(+), 43 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b808707f83ff..bc23bfb687c3 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7769,48 +7769,54 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 	}
 
 	for (i = 0; i <= BNX2_VPD_LEN - 3; ) {
-		unsigned int block_end;
+		int j;
+		unsigned int block_end, rosize;
 
 		i = pci_vpd_find_tag(data, i, BNX2_VPD_LEN,
 				     PCI_VPD_LRDT_RO_DATA);
 		if (i < 0)
 			break;
 
-		block_end = (i + PCI_VPD_LRDT_TAG_SIZE +
-			    pci_vpd_lrdt_size(&data[i]));
+		rosize = pci_vpd_lrdt_size(&data[i]);
+		block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
 		i += PCI_VPD_LRDT_TAG_SIZE;
 
 		if (block_end > BNX2_VPD_LEN)
 			goto vpd_done;
 
-		while (i < (block_end - 2)) {
-			int len = pci_vpd_info_field_size(&data[i]);
+		j = pci_vpd_find_info_keyword(data, i, rosize,
+					      PCI_VPD_RO_KEYWORD_MFR_ID);
+		if (j > 0) {
+			int len = pci_vpd_info_field_size(&data[j]);
 
-			if (i + PCI_VPD_INFO_FLD_HDR_SIZE + len > block_end)
+			if (j + PCI_VPD_INFO_FLD_HDR_SIZE + len > block_end ||
+			    len != 4 ||
+			    memcmp(&data[j + PCI_VPD_INFO_FLD_HDR_SIZE],
+				   "1028", 4))
 				goto vpd_done;
 
-			if (data[i] == 'M' && data[i + 1] == 'N') {
-				if (len != 4 ||
-				    memcmp(&data[i + PCI_VPD_INFO_FLD_HDR_SIZE],
-					   "1028", 4))
-					goto vpd_done;
-				mn_match = true;
+			mn_match = true;
+		}
 
-			} else if (data[i] == 'V' && data[i + 1] == '0') {
-				if (len > BNX2_MAX_VER_SLEN)
-					goto vpd_done;
+		j = pci_vpd_find_info_keyword(data, i, rosize,
+					      PCI_VPD_RO_KEYWORD_VENDOR0);
+		if (j > 0) {
+			int len = pci_vpd_info_field_size(&data[j]);
 
-				v0_len = len;
-				v0_str = &data[i + PCI_VPD_INFO_FLD_HDR_SIZE];
-			}
-			i += PCI_VPD_INFO_FLD_HDR_SIZE + len;
-
-			if (mn_match && v0_str) {
-				memcpy(bp->fw_version, v0_str, v0_len);
-				bp->fw_version[v0_len] = ' ';
+			j += PCI_VPD_INFO_FLD_HDR_SIZE;
+			if (j + len > block_end || len > BNX2_MAX_VER_SLEN)
 				goto vpd_done;
-			}
+
+			v0_len = len;
+			v0_str = &data[j];
 		}
+
+		if (mn_match && v0_str) {
+			memcpy(bp->fw_version, v0_str, v0_len);
+			bp->fw_version[v0_len] = ' ';
+			goto vpd_done;
+		}
+
 		goto vpd_done;
 	}
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f59f36910e98..204c565caa5a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12586,39 +12586,33 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 
 	/* Now parse and find the part number. */
 	for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) {
-		unsigned int block_end;
+		unsigned int block_end, rosize;
 
 		i = pci_vpd_find_tag(vpd_data, i, TG3_NVM_VPD_LEN,
 				     PCI_VPD_LRDT_RO_DATA);
 		if (i < 0)
 			break;
 
-		block_end = i + PCI_VPD_LRDT_TAG_SIZE +
-			    pci_vpd_lrdt_size(&vpd_data[i]);
-
+		rosize = pci_vpd_lrdt_size(&vpd_data[i]);
+		block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
 		i += PCI_VPD_LRDT_TAG_SIZE;
 
 		if (block_end > TG3_NVM_VPD_LEN)
 			goto out_not_found;
 
-		while (i < (block_end - 2)) {
-			if (vpd_data[i + 0] == 'P' &&
-			    vpd_data[i + 1] == 'N') {
-				int partno_len = pci_vpd_info_field_size(&vpd_data[i]);
+		i = pci_vpd_find_info_keyword(vpd_data, i, rosize,
+					      PCI_VPD_RO_KEYWORD_PARTNO);
+		if (i > 0) {
+			u8 len = pci_vpd_info_field_size(&vpd_data[i]);
 
-				i += PCI_VPD_INFO_FLD_HDR_SIZE;
-				if (partno_len > TG3_BPN_SIZE ||
-				    (partno_len + i) > TG3_NVM_VPD_LEN)
-					goto out_not_found;
+			i += PCI_VPD_INFO_FLD_HDR_SIZE;
+			if (len > TG3_BPN_SIZE ||
+			    (len + i) > TG3_NVM_VPD_LEN)
+				break;
 
-				memcpy(tp->board_part_number,
-				       &vpd_data[i], partno_len);
+			memcpy(tp->board_part_number, &vpd_data[i], len);
 
-				/* Success. */
-				return;
-			}
-			i += PCI_VPD_INFO_FLD_HDR_SIZE +
-			     pci_vpd_info_field_size(&vpd_data[i]);
+			return;
 		}
 
 		/* Part number not found. */
diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
index 6bc554576f8d..a5a5ca17cfe6 100644
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -41,3 +41,21 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt)
 	return -ENOENT;
 }
 EXPORT_SYMBOL_GPL(pci_vpd_find_tag);
+
+int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
+			      unsigned int len, const char *kw)
+{
+	int i;
+
+	for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) {
+		if (buf[i + 0] == kw[0] &&
+		    buf[i + 1] == kw[1])
+			return i;
+
+		i += PCI_VPD_INFO_FLD_HDR_SIZE +
+		     pci_vpd_info_field_size(&buf[i]);
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index cfff32fc6e35..1f4a52131c99 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1375,6 +1375,10 @@ void pci_request_acs(void);
 
 #define PCI_VPD_INFO_FLD_HDR_SIZE	3
 
+#define PCI_VPD_RO_KEYWORD_PARTNO	"PN"
+#define PCI_VPD_RO_KEYWORD_MFR_ID	"MN"
+#define PCI_VPD_RO_KEYWORD_VENDOR0	"V0"
+
 /**
  * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
  * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
@@ -1420,5 +1424,18 @@ static inline u8 pci_vpd_info_field_size(const u8 *info_field)
  */
 int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
 
+/**
+ * pci_vpd_find_info_keyword - Locates an information field keyword in the VPD
+ * @buf: Pointer to buffered vpd data
+ * @off: The offset into the buffer at which to begin the search
+ * @len: The length of the buffer area, relative to off, in which to search
+ * @kw: The keyword to search for
+ *
+ * Returns the index where the information field keyword was found or
+ * -ENOENT otherwise.
+ */
+int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
+			      unsigned int len, const char *kw);
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
-- 
cgit v1.2.3


From df25bc38b5531aa79a20e34549ea9fedf5f3ae36 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:44 +0000
Subject: bnx2: Remove now useless VPD code

Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 74 +++++++++++++++++++++---------------------------------
 1 file changed, 29 insertions(+), 45 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index bc23bfb687c3..381887ba677c 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7743,10 +7743,9 @@ bnx2_get_pci_speed(struct bnx2 *bp)
 static void __devinit
 bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 {
-	int rc, i, v0_len = 0;
+	int rc, i, j;
 	u8 *data;
-	u8 *v0_str = NULL;
-	bool mn_match = false;
+	unsigned int block_end, rosize, len;
 
 #define BNX2_VPD_NVRAM_OFFSET	0x300
 #define BNX2_VPD_LEN		128
@@ -7768,57 +7767,42 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 		data[i + 3] = data[i + BNX2_VPD_LEN];
 	}
 
-	for (i = 0; i <= BNX2_VPD_LEN - 3; ) {
-		int j;
-		unsigned int block_end, rosize;
-
-		i = pci_vpd_find_tag(data, i, BNX2_VPD_LEN,
-				     PCI_VPD_LRDT_RO_DATA);
-		if (i < 0)
-			break;
-
-		rosize = pci_vpd_lrdt_size(&data[i]);
-		block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
-		i += PCI_VPD_LRDT_TAG_SIZE;
-
-		if (block_end > BNX2_VPD_LEN)
-			goto vpd_done;
+	i = pci_vpd_find_tag(data, 0, BNX2_VPD_LEN, PCI_VPD_LRDT_RO_DATA);
+	if (i < 0)
+		goto vpd_done;
 
-		j = pci_vpd_find_info_keyword(data, i, rosize,
-					      PCI_VPD_RO_KEYWORD_MFR_ID);
-		if (j > 0) {
-			int len = pci_vpd_info_field_size(&data[j]);
+	rosize = pci_vpd_lrdt_size(&data[i]);
+	i += PCI_VPD_LRDT_TAG_SIZE;
+	block_end = i + rosize;
 
-			if (j + PCI_VPD_INFO_FLD_HDR_SIZE + len > block_end ||
-			    len != 4 ||
-			    memcmp(&data[j + PCI_VPD_INFO_FLD_HDR_SIZE],
-				   "1028", 4))
-				goto vpd_done;
+	if (block_end > BNX2_VPD_LEN)
+		goto vpd_done;
 
-			mn_match = true;
-		}
+	j = pci_vpd_find_info_keyword(data, i, rosize,
+				      PCI_VPD_RO_KEYWORD_MFR_ID);
+	if (j < 0)
+		goto vpd_done;
 
-		j = pci_vpd_find_info_keyword(data, i, rosize,
-					      PCI_VPD_RO_KEYWORD_VENDOR0);
-		if (j > 0) {
-			int len = pci_vpd_info_field_size(&data[j]);
+	len = pci_vpd_info_field_size(&data[j]);
 
-			j += PCI_VPD_INFO_FLD_HDR_SIZE;
-			if (j + len > block_end || len > BNX2_MAX_VER_SLEN)
-				goto vpd_done;
+	j += PCI_VPD_INFO_FLD_HDR_SIZE;
+	if (j + len > block_end || len != 4 ||
+	    memcmp(&data[j], "1028", 4))
+		goto vpd_done;
 
-			v0_len = len;
-			v0_str = &data[j];
-		}
+	j = pci_vpd_find_info_keyword(data, i, rosize,
+				      PCI_VPD_RO_KEYWORD_VENDOR0);
+	if (j < 0)
+		goto vpd_done;
 
-		if (mn_match && v0_str) {
-			memcpy(bp->fw_version, v0_str, v0_len);
-			bp->fw_version[v0_len] = ' ';
-			goto vpd_done;
-		}
+	len = pci_vpd_info_field_size(&data[j]);
 
+	j += PCI_VPD_INFO_FLD_HDR_SIZE;
+	if (j + len > block_end || len > BNX2_MAX_VER_SLEN)
 		goto vpd_done;
-	}
+
+	memcpy(bp->fw_version, &data[j], len);
+	bp->fw_version[len] = ' ';
 
 vpd_done:
 	kfree(data);
-- 
cgit v1.2.3


From 4181b2c8bc29bb756ac1816678104b528377b656 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 26 Feb 2010 14:04:45 +0000
Subject: tg3: Remove now useless VPD code

Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 52 +++++++++++++++++++++++-----------------------------
 1 file changed, 23 insertions(+), 29 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 204c565caa5a..0fa7688ab483 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12547,7 +12547,8 @@ skip_phy_reset:
 static void __devinit tg3_read_partno(struct tg3 *tp)
 {
 	unsigned char vpd_data[TG3_NVM_VPD_LEN];   /* in little-endian format */
-	int i;
+	unsigned int block_end, rosize, len;
+	int i = 0;
 	u32 magic;
 
 	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
@@ -12569,7 +12570,7 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 		}
 	} else {
 		ssize_t cnt;
-		unsigned int pos = 0, i = 0;
+		unsigned int pos = 0;
 
 		for (; pos < TG3_NVM_VPD_LEN && i < 3; i++, pos += cnt) {
 			cnt = pci_read_vpd(tp->pdev, pos,
@@ -12584,40 +12585,33 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 			goto out_not_found;
 	}
 
-	/* Now parse and find the part number. */
-	for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) {
-		unsigned int block_end, rosize;
+	i = pci_vpd_find_tag(vpd_data, 0, TG3_NVM_VPD_LEN,
+			     PCI_VPD_LRDT_RO_DATA);
+	if (i < 0)
+		goto out_not_found;
 
-		i = pci_vpd_find_tag(vpd_data, i, TG3_NVM_VPD_LEN,
-				     PCI_VPD_LRDT_RO_DATA);
-		if (i < 0)
-			break;
+	rosize = pci_vpd_lrdt_size(&vpd_data[i]);
+	block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
+	i += PCI_VPD_LRDT_TAG_SIZE;
 
-		rosize = pci_vpd_lrdt_size(&vpd_data[i]);
-		block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
-		i += PCI_VPD_LRDT_TAG_SIZE;
+	if (block_end > TG3_NVM_VPD_LEN)
+		goto out_not_found;
 
-		if (block_end > TG3_NVM_VPD_LEN)
-			goto out_not_found;
+	i = pci_vpd_find_info_keyword(vpd_data, i, rosize,
+				      PCI_VPD_RO_KEYWORD_PARTNO);
+	if (i < 0)
+		goto out_not_found;
 
-		i = pci_vpd_find_info_keyword(vpd_data, i, rosize,
-					      PCI_VPD_RO_KEYWORD_PARTNO);
-		if (i > 0) {
-			u8 len = pci_vpd_info_field_size(&vpd_data[i]);
+	len = pci_vpd_info_field_size(&vpd_data[i]);
 
-			i += PCI_VPD_INFO_FLD_HDR_SIZE;
-			if (len > TG3_BPN_SIZE ||
-			    (len + i) > TG3_NVM_VPD_LEN)
-				break;
-
-			memcpy(tp->board_part_number, &vpd_data[i], len);
+	i += PCI_VPD_INFO_FLD_HDR_SIZE;
+	if (len > TG3_BPN_SIZE ||
+	    (len + i) > TG3_NVM_VPD_LEN)
+		goto out_not_found;
 
-			return;
-		}
+	memcpy(tp->board_part_number, &vpd_data[i], len);
 
-		/* Part number not found. */
-		goto out_not_found;
-	}
+	return;
 
 out_not_found:
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
-- 
cgit v1.2.3


From 60bbc725b5b3009bb1bf2628ce5033d9bc108881 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Sat, 27 Feb 2010 13:34:20 +0000
Subject: axnet_cs: add new id

axnet_cs:
  add new id (corega PCC-TXM)

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/axnet_cs.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d90e0fcdbce1..09291e60d309 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("CNet", "CNF301", 0xbc477dde, 0x78c5f40b),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXM", 0x5261440f, 0x3abbd061),
 	PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
-- 
cgit v1.2.3


From 655ffee284dfcf9a24ac0343f3e5ee6db85b85c5 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Sat, 27 Feb 2010 07:35:45 +0000
Subject: wireless: convert to use netdev_for_each_mc_addr

also added missed locking in rndis_wlan.c

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/libertas/main.c |  8 ++++++--
 drivers/net/wireless/orinoco/hw.c    | 22 +++++++---------------
 drivers/net/wireless/orinoco/hw.h    |  2 +-
 drivers/net/wireless/orinoco/main.c  |  3 +--
 drivers/net/wireless/ray_cs.c        |  8 ++++----
 drivers/net/wireless/rndis_wlan.c    | 15 ++++++++-------
 drivers/net/wireless/zd1201.c        |  9 ++++-----
 7 files changed, 31 insertions(+), 36 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index cd8ed7fdafad..28a1c9d1627a 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -319,15 +319,18 @@ static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd,
 {
 	int i = nr_addrs;
 	struct dev_mc_list *mc_list;
+	int cnt;
 
 	if ((dev->flags & (IFF_UP|IFF_MULTICAST)) != (IFF_UP|IFF_MULTICAST))
 		return nr_addrs;
 
 	netif_addr_lock_bh(dev);
-	for (mc_list = dev->mc_list; mc_list; mc_list = mc_list->next) {
+	cnt = netdev_mc_count(dev);
+	netdev_for_each_mc_addr(mc_list, dev) {
 		if (mac_in_list(cmd->maclist, nr_addrs, mc_list->dmi_addr)) {
 			lbs_deb_net("mcast address %s:%pM skipped\n", dev->name,
 				    mc_list->dmi_addr);
+			cnt--;
 			continue;
 		}
 
@@ -337,9 +340,10 @@ static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr *cmd,
 		lbs_deb_net("mcast address %s:%pM added to filter\n", dev->name,
 			    mc_list->dmi_addr);
 		i++;
+		cnt--;
 	}
 	netif_addr_unlock_bh(dev);
-	if (mc_list)
+	if (cnt)
 		return -EOVERFLOW;
 
 	return i;
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index 404830f47ab2..e6369242e49c 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -1028,7 +1028,7 @@ int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx)
 }
 
 int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
-				    struct dev_addr_list *mc_list,
+				    struct net_device *dev,
 				    int mc_count, int promisc)
 {
 	hermes_t *hw = &priv->hw;
@@ -1049,24 +1049,16 @@ int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
 	 * group address if either we want to multicast, or if we were
 	 * multicasting and want to stop */
 	if (!promisc && (mc_count || priv->mc_count)) {
-		struct dev_mc_list *p = mc_list;
+		struct dev_mc_list *p;
 		struct hermes_multicast mclist;
-		int i;
+		int i = 0;
 
-		for (i = 0; i < mc_count; i++) {
-			/* paranoia: is list shorter than mc_count? */
-			BUG_ON(!p);
-			/* paranoia: bad address size in list? */
-			BUG_ON(p->dmi_addrlen != ETH_ALEN);
-
-			memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
-			p = p->next;
+		netdev_for_each_mc_addr(p, dev) {
+			if (i == mc_count)
+				break;
+			memcpy(mclist.addr[i++], p->dmi_addr, ETH_ALEN);
 		}
 
-		if (p)
-			printk(KERN_WARNING "%s: Multicast list is "
-			       "longer than mc_count\n", priv->ndev->name);
-
 		err = hermes_write_ltv(hw, USER_BAP,
 				   HERMES_RID_CNFGROUPADDRESSES,
 				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index e2f7fdc4d45a..9799a1d14a63 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -43,7 +43,7 @@ int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
 			      u8 *tsc, size_t tsc_len);
 int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx);
 int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
-				    struct dev_addr_list *mc_list,
+				    struct net_device *dev,
 				    int mc_count, int promisc);
 int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
 			 char buf[IW_ESSID_MAX_SIZE+1]);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index a9e9cea2d767..b42634c614b5 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -1676,8 +1676,7 @@ __orinoco_set_multicast_list(struct net_device *dev)
 		mc_count = netdev_mc_count(dev);
 	}
 
-	err = __orinoco_hw_set_multicast_list(priv, dev->mc_list, mc_count,
-					      promisc);
+	err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc);
 
 	return err;
 }
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 85905cab4f16..84c530aa52f9 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -1871,10 +1871,8 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
 /*===========================================================================*/
 static void ray_update_multi_list(struct net_device *dev, int all)
 {
-	struct dev_mc_list *dmi, **dmip;
 	int ccsindex;
 	struct ccs __iomem *pccs;
-	int i = 0;
 	ray_dev_t *local = netdev_priv(dev);
 	struct pcmcia_device *link = local->finder;
 	void __iomem *p = local->sram + HOST_TO_ECF_BASE;
@@ -1895,9 +1893,11 @@ static void ray_update_multi_list(struct net_device *dev, int all)
 		writeb(0xff, &pccs->var);
 		local->num_multi = 0xff;
 	} else {
+		struct dev_mc_list *dmi;
+		int i = 0;
+
 		/* Copy the kernel's list of MC addresses to card */
-		for (dmip = &dev->mc_list; (dmi = *dmip) != NULL;
-		     dmip = &dmi->next) {
+		netdev_for_each_mc_addr(dmi, dev) {
 			memcpy_toio(p, dmi->dmi_addr, ETH_ALEN);
 			dev_dbg(&link->dev,
 			      "ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 65cbd060cc30..9f6d6bf06b8e 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1502,6 +1502,7 @@ static void set_multicast_list(struct usbnet *usbdev)
 
 	filter = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
 
+	netif_addr_lock_bh(usbdev->net);
 	if (usbdev->net->flags & IFF_PROMISC) {
 		filter |= RNDIS_PACKET_TYPE_PROMISCUOUS |
 			RNDIS_PACKET_TYPE_ALL_LOCAL;
@@ -1515,16 +1516,15 @@ static void set_multicast_list(struct usbnet *usbdev)
 			netdev_warn(usbdev->net,
 				    "couldn't alloc %d bytes of memory\n",
 				    size * ETH_ALEN);
+			netif_addr_unlock_bh(usbdev->net);
 			return;
 		}
 
-		mclist = usbdev->net->mc_list;
-		for (i = 0; i < size && mclist; mclist = mclist->next) {
-			if (mclist->dmi_addrlen != ETH_ALEN)
-				continue;
-
-			memcpy(buf + i * ETH_ALEN, mclist->dmi_addr, ETH_ALEN);
-			i++;
+		i = 0;
+		netdev_for_each_mc_addr(mclist, usbdev->net) {
+			if (i == size)
+				break;
+			memcpy(buf + i++ * ETH_ALEN, mclist->dmi_addr, ETH_ALEN);
 		}
 
 		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, buf,
@@ -1539,6 +1539,7 @@ static void set_multicast_list(struct usbnet *usbdev)
 
 		kfree(buf);
 	}
+	netif_addr_unlock_bh(usbdev->net);
 
 	ret = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
 							sizeof(filter));
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 5d2b52f4717f..6917286edcae 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -875,17 +875,16 @@ static struct iw_statistics *zd1201_get_wireless_stats(struct net_device *dev)
 static void zd1201_set_multicast(struct net_device *dev)
 {
 	struct zd1201 *zd = netdev_priv(dev);
-	struct dev_mc_list *mc = dev->mc_list;
+	struct dev_mc_list *mc;
 	unsigned char reqbuf[ETH_ALEN*ZD1201_MAXMULTI];
 	int i;
 
 	if (netdev_mc_count(dev) > ZD1201_MAXMULTI)
 		return;
 
-	for (i=0; i<netdev_mc_count(dev); i++) {
-		memcpy(reqbuf+i*ETH_ALEN, mc->dmi_addr, ETH_ALEN);
-		mc = mc->next;
-	}
+	i = 0;
+	netdev_for_each_mc_addr(mc, dev)
+		memcpy(reqbuf + i++ * ETH_ALEN, mc->dmi_addr, ETH_ALEN);
 	zd1201_setconfig(zd, ZD1201_RID_CNFGROUPADDRESS, reqbuf,
 			 netdev_mc_count(dev) * ETH_ALEN, 0);
 }
-- 
cgit v1.2.3


From c16cc0b464b8876cfd57ce1c1dbcb6f9a6a0bce3 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Sun, 28 Feb 2010 00:12:02 +0000
Subject: bnx2x: Tx barriers and locks

[Resending with the proper subject. Sorry for the mess. ]

This patch is based on the RFC of Stanislaw Gruszka.

More specifically it fixes two possible races:
- One, described by Stanislaw, may lead to permanent disabling of the Tx
queue.
This is fixed by adding the smp_wmb() to propagate the BD consumer
change towards the memory.
- Second may lead to bnx2x_start_xmit() returning NETDEV_TX_BUSY.
This is fixed by taking a tx_lock() before rechecking the number of
available Tx BDs.

thanks,
vlad

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 5adf2a05246f..ed785a30e98b 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,8 +57,8 @@
 #include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.52.1-6"
-#define DRV_MODULE_RELDATE	"2010/02/16"
+#define DRV_MODULE_VERSION	"1.52.1-7"
+#define DRV_MODULE_RELDATE	"2010/02/28"
 #define BNX2X_BC_VER		0x040200
 
 #include <linux/firmware.h>
@@ -957,21 +957,34 @@ static int bnx2x_tx_int(struct bnx2x_fastpath *fp)
 	fp->tx_pkt_cons = sw_cons;
 	fp->tx_bd_cons = bd_cons;
 
+	/* Need to make the tx_bd_cons update visible to start_xmit()
+	 * before checking for netif_tx_queue_stopped().  Without the
+	 * memory barrier, there is a small possibility that
+	 * start_xmit() will miss it and cause the queue to be stopped
+	 * forever.
+	 */
+	smp_wmb();
+
 	/* TBD need a thresh? */
 	if (unlikely(netif_tx_queue_stopped(txq))) {
-
-		/* Need to make the tx_bd_cons update visible to start_xmit()
-		 * before checking for netif_tx_queue_stopped().  Without the
-		 * memory barrier, there is a small possibility that
-		 * start_xmit() will miss it and cause the queue to be stopped
-		 * forever.
+		/* Taking tx_lock() is needed to prevent reenabling the queue
+		 * while it's empty. This could have happen if rx_action() gets
+		 * suspended in bnx2x_tx_int() after the condition before
+		 * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()):
+		 *
+		 * stops the queue->sees fresh tx_bd_cons->releases the queue->
+		 * sends some packets consuming the whole queue again->
+		 * stops the queue
 		 */
-		smp_mb();
+
+		__netif_tx_lock(txq, smp_processor_id());
 
 		if ((netif_tx_queue_stopped(txq)) &&
 		    (bp->state == BNX2X_STATE_OPEN) &&
 		    (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
 			netif_tx_wake_queue(txq);
+
+		__netif_tx_unlock(txq);
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From b88aafd365bc6a2222e2d03ff320adea3a37f628 Mon Sep 17 00:00:00 2001
From: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Date: Tue, 2 Mar 2010 03:44:41 -0800
Subject: sis190: fix cable detect via link status poll

Some sis190 devices don't report LinkChange, so do polling for
link status.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sis190.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 80af4a44580e..760d9e83a465 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -285,6 +285,11 @@ struct sis190_private {
 	struct list_head first_phy;
 	u32 features;
 	u32 negotiated_lpa;
+	enum {
+		LNK_OFF,
+		LNK_ON,
+		LNK_AUTONEG,
+	} link_status;
 };
 
 struct sis190_phy {
@@ -750,6 +755,7 @@ static irqreturn_t sis190_interrupt(int irq, void *__dev)
 
 	if (status & LinkChange) {
 		netif_info(tp, intr, dev, "link change\n");
+		del_timer(&tp->timer);
 		schedule_work(&tp->phy_task);
 	}
 
@@ -922,12 +928,15 @@ static void sis190_phy_task(struct work_struct *work)
 	if (val & BMCR_RESET) {
 		// FIXME: needlessly high ?  -- FR 02/07/2005
 		mod_timer(&tp->timer, jiffies + HZ/10);
-	} else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
-		     BMSR_ANEGCOMPLETE)) {
+		goto out_unlock;
+	}
+
+	val = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+	if (!(val & BMSR_ANEGCOMPLETE) && tp->link_status != LNK_AUTONEG) {
 		netif_carrier_off(dev);
 		netif_warn(tp, link, dev, "auto-negotiating...\n");
-		mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
-	} else {
+		tp->link_status = LNK_AUTONEG;
+	} else if ((val & BMSR_LSTATUS) && tp->link_status != LNK_ON) {
 		/* Rejoice ! */
 		struct {
 			int val;
@@ -1000,7 +1009,10 @@ static void sis190_phy_task(struct work_struct *work)
 
 		netif_info(tp, link, dev, "link on %s mode\n", p->msg);
 		netif_carrier_on(dev);
-	}
+		tp->link_status = LNK_ON;
+	} else if (!(val & BMSR_LSTATUS) && tp->link_status != LNK_AUTONEG)
+		tp->link_status = LNK_OFF;
+	mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
 
 out_unlock:
 	rtnl_unlock();
@@ -1513,6 +1525,7 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
 
 	tp->pci_dev = pdev;
 	tp->mmio_addr = ioaddr;
+	tp->link_status = LNK_OFF;
 
 	sis190_irq_mask_and_ack(ioaddr);
 
-- 
cgit v1.2.3


From f31e50a802baae939c49819b8acd8f077019d398 Mon Sep 17 00:00:00 2001
From: Sathya Perla <sathyap@serverengines.com>
Date: Tue, 2 Mar 2010 03:56:39 -0800
Subject: be2net: fix tx completion polling

In tx/mcc polling, napi_complete() is being incorrectly called
before reaping tx completions. This can cause tx compl processing
to be scheduled on another cpu concurrently which can result in a panic.
This if fixed by calling napi complete() after tx/mcc compl processing
but before re-enabling interrupts (via a cq notify).

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_cmds.c | 26 ++++++++++++-------------
 drivers/net/benet/be_cmds.h |  2 +-
 drivers/net/benet/be_main.c | 47 ++++++++++++++++++++++-----------------------
 3 files changed, 37 insertions(+), 38 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index c8a2bacb1d13..4b1f80519ca4 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -119,10 +119,10 @@ void be_async_mcc_disable(struct be_adapter *adapter)
 	adapter->mcc_obj.rearm_cq = false;
 }
 
-int be_process_mcc(struct be_adapter *adapter)
+int be_process_mcc(struct be_adapter *adapter, int *status)
 {
 	struct be_mcc_compl *compl;
-	int num = 0, status = 0;
+	int num = 0;
 	struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
 
 	spin_lock_bh(&adapter->mcc_cq_lock);
@@ -135,31 +135,31 @@ int be_process_mcc(struct be_adapter *adapter)
 			be_async_link_state_process(adapter,
 				(struct be_async_event_link_state *) compl);
 		} else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) {
-				status = be_mcc_compl_process(adapter, compl);
+				*status = be_mcc_compl_process(adapter, compl);
 				atomic_dec(&mcc_obj->q.used);
 		}
 		be_mcc_compl_use(compl);
 		num++;
 	}
 
-	if (num)
-		be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num);
-
 	spin_unlock_bh(&adapter->mcc_cq_lock);
-	return status;
+	return num;
 }
 
 /* Wait till no more pending mcc requests are present */
 static int be_mcc_wait_compl(struct be_adapter *adapter)
 {
 #define mcc_timeout		120000 /* 12s timeout */
-	int i, status;
+	int i, num, status = 0;
+	struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
+
 	for (i = 0; i < mcc_timeout; i++) {
-		status = be_process_mcc(adapter);
-		if (status)
-			return status;
+		num = be_process_mcc(adapter, &status);
+		if (num)
+			be_cq_notify(adapter, mcc_obj->cq.id,
+				mcc_obj->rearm_cq, num);
 
-		if (atomic_read(&adapter->mcc_obj.q.used) == 0)
+		if (atomic_read(&mcc_obj->q.used) == 0)
 			break;
 		udelay(100);
 	}
@@ -167,7 +167,7 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
 		dev_err(&adapter->pdev->dev, "mccq poll timed out\n");
 		return -1;
 	}
-	return 0;
+	return status;
 }
 
 /* Notify MCC requests and wait for completion */
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 728b0d736929..cce61f9a3714 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -920,7 +920,7 @@ extern int be_cmd_get_flow_control(struct be_adapter *adapter,
 extern int be_cmd_query_fw_cfg(struct be_adapter *adapter,
 			u32 *port_num, u32 *cap);
 extern int be_cmd_reset_function(struct be_adapter *adapter);
-extern int be_process_mcc(struct be_adapter *adapter);
+extern int be_process_mcc(struct be_adapter *adapter, int *status);
 extern int be_cmd_set_beacon_state(struct be_adapter *adapter,
 			u8 port_num, u8 beacon, u8 status, u8 state);
 extern int be_cmd_get_beacon_state(struct be_adapter *adapter,
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 27ccdd80257b..a703ed8e24fe 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -583,7 +583,7 @@ static void be_set_multicast_list(struct net_device *netdev)
 	}
 
 	be_cmd_multicast_set(adapter, adapter->if_handle, netdev,
-			&adapter->mc_cmd_mem);
+		&adapter->mc_cmd_mem);
 done:
 	return;
 }
@@ -1469,23 +1469,38 @@ int be_poll_rx(struct napi_struct *napi, int budget)
 	return work_done;
 }
 
-void be_process_tx(struct be_adapter *adapter)
+/* As TX and MCC share the same EQ check for both TX and MCC completions.
+ * For TX/MCC we don't honour budget; consume everything
+ */
+static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
 {
+	struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
+	struct be_adapter *adapter =
+		container_of(tx_eq, struct be_adapter, tx_eq);
 	struct be_queue_info *txq = &adapter->tx_obj.q;
 	struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
 	struct be_eth_tx_compl *txcp;
-	u32 num_cmpl = 0;
+	int tx_compl = 0, mcc_compl, status = 0;
 	u16 end_idx;
 
 	while ((txcp = be_tx_compl_get(tx_cq))) {
 		end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
-					wrb_index, txcp);
+				wrb_index, txcp);
 		be_tx_compl_process(adapter, end_idx);
-		num_cmpl++;
+		tx_compl++;
 	}
 
-	if (num_cmpl) {
-		be_cq_notify(adapter, tx_cq->id, true, num_cmpl);
+	mcc_compl = be_process_mcc(adapter, &status);
+
+	napi_complete(napi);
+
+	if (mcc_compl) {
+		struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
+		be_cq_notify(adapter, mcc_obj->cq.id, true, mcc_compl);
+	}
+
+	if (tx_compl) {
+		be_cq_notify(adapter, adapter->tx_obj.cq.id, true, tx_compl);
 
 		/* As Tx wrbs have been freed up, wake up netdev queue if
 		 * it was stopped due to lack of tx wrbs.
@@ -1496,24 +1511,8 @@ void be_process_tx(struct be_adapter *adapter)
 		}
 
 		drvr_stats(adapter)->be_tx_events++;
-		drvr_stats(adapter)->be_tx_compl += num_cmpl;
+		drvr_stats(adapter)->be_tx_compl += tx_compl;
 	}
-}
-
-/* As TX and MCC share the same EQ check for both TX and MCC completions.
- * For TX/MCC we don't honour budget; consume everything
- */
-static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
-{
-	struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
-	struct be_adapter *adapter =
-		container_of(tx_eq, struct be_adapter, tx_eq);
-
-	napi_complete(napi);
-
-	be_process_tx(adapter);
-
-	be_process_mcc(adapter);
 
 	return 1;
 }
-- 
cgit v1.2.3


From 2507c05ff55fbf38326b08ed27eaed233bc75042 Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Tue, 2 Mar 2010 03:57:33 -0800
Subject: virtio_net: remove forgotten assignment

This is no longer needed. I missed to remove this in
567ec874d15b478c8eda7e9a5d2dcb05f13f1fb5 ("net: convert multiple
drivers to use netdev_for_each_mc_addr, part6")

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/virtio_net.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e6095f3aa05f..25dc77ccbf58 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -775,7 +775,6 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	mac_data = (void *)&mac_data->macs[uc_count][0];
 
 	mac_data->entries = mc_count;
-	addr = dev->mc_list;
 	i = 0;
 	netdev_for_each_mc_addr(addr, dev)
 		memcpy(&mac_data->macs[i++][0], addr->da_addr, ETH_ALEN);
-- 
cgit v1.2.3


From 6510b8917948283005a125c8337d3312a8a0561c Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Fri, 26 Feb 2010 15:10:28 +0100
Subject: airo: return from set_wep_key() when key length is zero

Even if keylen == 0 is a bug and should not really happen, better avoid
possibility of passing bad value to firmware.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/airo.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 698d5672a070..dc5018a6d9ed 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5255,7 +5255,8 @@ static int set_wep_key(struct airo_info *ai, u16 index, const char *key,
 	WepKeyRid wkr;
 	int rc;
 
-	WARN_ON(keylen == 0);
+	if (WARN_ON(keylen == 0))
+		return -1;
 
 	memset(&wkr, 0, sizeof(wkr));
 	wkr.len = cpu_to_le16(sizeof(wkr));
-- 
cgit v1.2.3


From 86baf712295a00d664da8566186b67041c89b15b Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 27 Feb 2010 09:12:34 +0300
Subject: zd1211rw: fix potential array underflow

The first chunk fixes a debugging assert to print a warning about array underflows.
The second chunk corrects a potential array underflow.  I also removed an assert
in the second chunk because it can no longer happen.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1211rw/zd_mac.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 2d555cc30508..e24099613d91 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -350,7 +350,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
 	first_idx = info->status.rates[0].idx;
 	ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 	retries = &zd_retry_rates[first_idx];
-	ZD_ASSERT(0<=retry && retry<=retries->count);
+	ZD_ASSERT(1 <= retry && retry <= retries->count);
 
 	info->status.rates[0].idx = retries->rate[0];
 	info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
@@ -360,7 +360,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
 		info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
 	}
 	for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
-		info->status.rates[i].idx = retries->rate[retry-1];
+		info->status.rates[i].idx = retries->rate[retry - 1];
 		info->status.rates[i].count = 1; // (success ? 1:2);
 	}
 	if (i<IEEE80211_TX_MAX_RATES)
@@ -424,12 +424,10 @@ void zd_mac_tx_failed(struct urb *urb)
 		first_idx = info->status.rates[0].idx;
 		ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 		retries = &zd_retry_rates[first_idx];
-		if (retry < 0 || retry > retries->count) {
+		if (retry <= 0 || retry > retries->count)
 			continue;
-		}
 
-		ZD_ASSERT(0<=retry && retry<=retries->count);
-		final_idx = retries->rate[retry-1];
+		final_idx = retries->rate[retry - 1];
 		final_rate = zd_rates[final_idx].hw_value;
 
 		if (final_rate != tx_status->rate) {
-- 
cgit v1.2.3


From a9f042cbe5284f34ccff15f3084477e11b39b17b Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sun, 28 Feb 2010 00:56:24 +0800
Subject: ath9k: fix lockdep warning when unloading module

Since txq->axq_lock may be hold in softirq context, it must be
acquired with spin_lock_bh() instead of spin_lock() if softieq is
enabled.

The patch fixes the lockdep warning below when unloading ath9k modules.

=================================
[ INFO: inconsistent lock state ]
2.6.33-wl #12
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
rmmod/3642 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&txq->axq_lock)->rlock){+.?...}, at: [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k]
{IN-SOFTIRQ-W} state was registered at:
  [<ffffffff8107577d>] __lock_acquire+0x2f6/0xd35
  [<ffffffff81076289>] lock_acquire+0xcd/0xf1
  [<ffffffff813a7486>] _raw_spin_lock_bh+0x3b/0x6e
  [<ffffffffa0356b49>] spin_lock_bh+0xe/0x10 [ath9k]
  [<ffffffffa0358ec7>] ath_tx_tasklet+0xcd/0x391 [ath9k]
  [<ffffffffa0354f5f>] ath9k_tasklet+0x70/0xc8 [ath9k]
  [<ffffffff8104e601>] tasklet_action+0x8c/0xf4
  [<ffffffff8104f459>] __do_softirq+0xf8/0x1cd
  [<ffffffff8100ab1c>] call_softirq+0x1c/0x30
  [<ffffffff8100c2cf>] do_softirq+0x4b/0xa3
  [<ffffffff8104f045>] irq_exit+0x4a/0x8c
  [<ffffffff813acccc>] do_IRQ+0xac/0xc3
  [<ffffffff813a7d53>] ret_from_intr+0x0/0x16
  [<ffffffff81302d52>] cpuidle_idle_call+0x9e/0xf8
  [<ffffffff81008be7>] cpu_idle+0x62/0x9d
  [<ffffffff81391c1a>] rest_init+0x7e/0x80
  [<ffffffff818bbd38>] start_kernel+0x3e8/0x3f3
  [<ffffffff818bb2bc>] x86_64_start_reservations+0xa7/0xab
  [<ffffffff818bb3b8>] x86_64_start_kernel+0xf8/0x107
irq event stamp: 42037
hardirqs last  enabled at (42037): [<ffffffff813a7b21>] _raw_spin_unlock_irqrestore+0x47/0x56
hardirqs last disabled at (42036): [<ffffffff813a72f4>] _raw_spin_lock_irqsave+0x2b/0x88
softirqs last  enabled at (42000): [<ffffffffa0353ea6>] spin_unlock_bh+0xe/0x10 [ath9k]
softirqs last disabled at (41998): [<ffffffff813a7463>] _raw_spin_lock_bh+0x18/0x6e

other info that might help us debug this:
4 locks held by rmmod/3642:
 #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff8132c10d>] rtnl_lock+0x17/0x19
 #1:  (&wdev->mtx){+.+.+.}, at: [<ffffffffa01e53f2>] cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211]
 #2:  (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0260834>] ieee80211_mgd_deauth+0x3f/0x17e [mac80211]
 #3:  (&local->sta_mtx){+.+.+.}, at: [<ffffffffa025a381>] sta_info_destroy_addr+0x2b/0x5e [mac80211]

stack backtrace:
Pid: 3642, comm: rmmod Not tainted 2.6.33-wl #12
Call Trace:
 [<ffffffff81074469>] valid_state+0x178/0x18b
 [<ffffffff81014f94>] ? save_stack_trace+0x2f/0x4c
 [<ffffffff81074e08>] ? check_usage_backwards+0x0/0x88
 [<ffffffff8107458f>] mark_lock+0x113/0x230
 [<ffffffff810757f1>] __lock_acquire+0x36a/0xd35
 [<ffffffff8101018d>] ? native_sched_clock+0x2d/0x5f
 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k]
 [<ffffffff81076289>] lock_acquire+0xcd/0xf1
 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k]
 [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffff813a7193>] _raw_spin_lock+0x36/0x69
 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k]
 [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k]
 [<ffffffff810749ed>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffffa0353950>] ath9k_sta_remove+0x22/0x26 [ath9k]
 [<ffffffffa025a08f>] __sta_info_destroy+0x1ad/0x38c [mac80211]
 [<ffffffffa025a394>] sta_info_destroy_addr+0x3e/0x5e [mac80211]
 [<ffffffffa02605d6>] ieee80211_set_disassoc+0x175/0x180 [mac80211]
 [<ffffffffa026084d>] ieee80211_mgd_deauth+0x58/0x17e [mac80211]
 [<ffffffff813a60c1>] ? __mutex_lock_common+0x37f/0x3a4
 [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211]
 [<ffffffffa026786e>] ieee80211_deauth+0x1e/0x20 [mac80211]
 [<ffffffffa01f47f9>] __cfg80211_mlme_deauth+0x130/0x13f [cfg80211]
 [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211]
 [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffffa01f7eee>] __cfg80211_disconnect+0x111/0x189 [cfg80211]
 [<ffffffffa01e5433>] cfg80211_netdev_notifier_call+0x2ce/0x46d [cfg80211]
 [<ffffffff813aa9ea>] notifier_call_chain+0x37/0x63
 [<ffffffff81068c98>] raw_notifier_call_chain+0x14/0x16
 [<ffffffff81322e97>] call_netdevice_notifiers+0x1b/0x1d
 [<ffffffff8132386d>] dev_close+0x6a/0xa6
 [<ffffffff8132395f>] rollback_registered_many+0xb6/0x2f4
 [<ffffffff81323bb8>] unregister_netdevice_many+0x1b/0x66
 [<ffffffffa026494f>] ieee80211_remove_interfaces+0xc5/0xd0 [mac80211]
 [<ffffffffa02580a2>] ieee80211_unregister_hw+0x47/0xe8 [mac80211]
 [<ffffffffa035290e>] ath9k_deinit_device+0x7a/0x9b [ath9k]
 [<ffffffffa035bc26>] ath_pci_remove+0x38/0x76 [ath9k]
 [<ffffffff8120940a>] pci_device_remove+0x2d/0x51
 [<ffffffff8129d797>] __device_release_driver+0x7b/0xd1
 [<ffffffff8129d885>] driver_detach+0x98/0xbe
 [<ffffffff8129ca7a>] bus_remove_driver+0x94/0xb7
 [<ffffffff8129ddd6>] driver_unregister+0x6c/0x74
 [<ffffffff812096d2>] pci_unregister_driver+0x46/0xad
 [<ffffffffa035bae1>] ath_pci_exit+0x15/0x17 [ath9k]
 [<ffffffffa035e1a2>] ath9k_exit+0xe/0x2f [ath9k]
 [<ffffffff8108050a>] sys_delete_module+0x1c7/0x236
 [<ffffffff813a7df5>] ? retint_swapgs+0x13/0x1b
 [<ffffffff810749b5>] ? trace_hardirqs_on_caller+0x119/0x144
 [<ffffffff8109b9f6>] ? audit_syscall_entry+0x11e/0x14a
 [<ffffffff81009bb2>] system_call_fastpath+0x16/0x1b
wlan1: deauthenticating from 00:23:cd:e1:f9:b2 by local choice (reason=3)
PM: Removing info for No Bus:wlan1
cfg80211: Calling CRDA to update world regulatory domain
PM: Removing info for No Bus:rfkill2
PM: Removing info for No Bus:phy1
ath9k 0000:16:00.0: PCI INT A disabled

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 47294f90bbe5..b2c8207f7bc1 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2258,7 +2258,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 		if (ATH_TXQ_SETUP(sc, i)) {
 			txq = &sc->tx.txq[i];
 
-			spin_lock(&txq->axq_lock);
+			spin_lock_bh(&txq->axq_lock);
 
 			list_for_each_entry_safe(ac,
 					ac_tmp, &txq->axq_acq, list) {
@@ -2279,7 +2279,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 				}
 			}
 
-			spin_unlock(&txq->axq_lock);
+			spin_unlock_bh(&txq->axq_lock);
 		}
 	}
 }
-- 
cgit v1.2.3


From 51b2853fd91a3c8fd9f3adc1549569d2c1dc2a2d Mon Sep 17 00:00:00 2001
From: Bryan Polk <sainth@eidolons.org>
Date: Mon, 1 Mar 2010 12:23:28 -0500
Subject: rt2x00: Add USB ID for CEIVA adapter to rt73usb

This adds support for CEIVA USB wireless adapters to the rt73usb driver.

Signed-off-by: Bryan Polk <sainth@eidolons.org>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt73usb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f39a8ed17841..47f3e4a26d77 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2352,6 +2352,8 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* CEIVA */
+	{ USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
-- 
cgit v1.2.3


From 6e93d7195e75741e9ebe23ca5591977d0b39ecc0 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Tue, 2 Mar 2010 16:34:49 +0100
Subject: rt2x00: fix rt2800pci compilation with SoC

Compiling rt2800pci with CONFIG_RT2800PCI_SOC fails with "... rt2880pci.c:
error: incompatible type for argument 2 of 'rt2x00soc_probe'".

Fix this by using &rt2800pci_ops instead of rt2800pci_ops.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index aca8c124f434..91cce2d0f6db 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1225,7 +1225,7 @@ MODULE_LICENSE("GPL");
 #ifdef CONFIG_RT2800PCI_SOC
 static int rt2800soc_probe(struct platform_device *pdev)
 {
-	return rt2x00soc_probe(pdev, rt2800pci_ops);
+	return rt2x00soc_probe(pdev, &rt2800pci_ops);
 }
 
 static struct platform_driver rt2800soc_driver = {
-- 
cgit v1.2.3


From 535765179fd4e8af26b69d2240d7ec33702a370a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 23 Dec 2009 13:15:30 +0100
Subject: ar9170: load firmware asynchronously

This converts ar9170 to load firmware asynchronously
out of ->probe() and only register with mac80211 when
all firmware has been loaded successfully. If, on the
other hand, any firmware fails to load, it will now
unbind from the device.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ar9170/ar9170.h |   1 +
 drivers/net/wireless/ath/ar9170/main.c   |  10 +-
 drivers/net/wireless/ath/ar9170/usb.c    | 170 +++++++++++++++++++------------
 3 files changed, 111 insertions(+), 70 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 8c8ce67971e9..dc662b76a1c8 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -166,6 +166,7 @@ struct ar9170 {
 	struct ath_common common;
 	struct mutex mutex;
 	enum ar9170_device_state state;
+	bool registered;
 	unsigned long bad_hw_nagger;
 
 	int (*open)(struct ar9170 *);
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 8a964f130367..f4650fcdebc9 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2701,7 +2701,8 @@ int ar9170_register(struct ar9170 *ar, struct device *pdev)
 	dev_info(pdev, "Atheros AR9170 is registered as '%s'\n",
 		 wiphy_name(ar->hw->wiphy));
 
-	return err;
+	ar->registered = true;
+	return 0;
 
 err_unreg:
 	ieee80211_unregister_hw(ar->hw);
@@ -2712,11 +2713,14 @@ err_out:
 
 void ar9170_unregister(struct ar9170 *ar)
 {
+	if (ar->registered) {
 #ifdef CONFIG_AR9170_LEDS
-	ar9170_unregister_leds(ar);
+		ar9170_unregister_leds(ar);
 #endif /* CONFIG_AR9170_LEDS */
 
-	kfree_skb(ar->rx_failover);
 	ieee80211_unregister_hw(ar->hw);
+	}
+
+	kfree_skb(ar->rx_failover);
 	mutex_destroy(&ar->mutex);
 }
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 0f361186b78f..4e30197afff6 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -582,43 +582,6 @@ static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data,
 	return 0;
 }
 
-static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
-{
-	int err = 0;
-
-	err = request_firmware(&aru->firmware, "ar9170.fw",
-			       &aru->udev->dev);
-	if (!err) {
-		aru->init_values = NULL;
-		return 0;
-	}
-
-	if (aru->req_one_stage_fw) {
-		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-			"not found and is required for this device\n");
-		return -EINVAL;
-	}
-
-	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-		"not found, trying old firmware...\n");
-
-	err = request_firmware(&aru->init_values, "ar9170-1.fw",
-			       &aru->udev->dev);
-	if (err) {
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
-		return err;
-	}
-
-	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
-	if (err) {
-		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "firmware file not found.\n");
-		return err;
-	}
-
-	return err;
-}
-
 static int ar9170_usb_reset(struct ar9170_usb *aru)
 {
 	int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING);
@@ -757,6 +720,103 @@ err_out:
 	return err;
 }
 
+static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
+{
+	struct device *parent = aru->udev->dev.parent;
+
+	/* unbind anything failed */
+	if (parent)
+		down(&parent->sem);
+	device_release_driver(&aru->udev->dev);
+	if (parent)
+		up(&parent->sem);
+}
+
+static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	aru->firmware = fw;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		goto err_freefw;
+	}
+
+	err = ar9170_usb_init_device(aru);
+	if (err)
+		goto err_freefw;
+
+	err = ar9170_usb_open(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_register(&aru->common, &aru->udev->dev);
+
+	ar9170_usb_stop(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	return;
+
+ err_unrx:
+	ar9170_usb_cancel_urbs(aru);
+
+ err_freefw:
+	ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_inits(const struct firmware *fw,
+				      void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	aru->init_values = fw;
+
+	/* ok so we have the init values -- get code for two-stage */
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-2.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_finish);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_step2(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (fw) {
+		ar9170_usb_firmware_finish(fw, context);
+		return;
+	}
+
+	if (aru->req_one_stage_fw) {
+		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+			"not found and is required for this device\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+		"not found, trying old firmware...\n");
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-1.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_inits);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
 static bool ar9170_requires_one_stage(const struct usb_device_id *id)
 {
 	if (!id->driver_info)
@@ -814,33 +874,9 @@ static int ar9170_usb_probe(struct usb_interface *intf,
 	if (err)
 		goto err_freehw;
 
-	err = ar9170_usb_request_firmware(aru);
-	if (err)
-		goto err_freehw;
-
-	err = ar9170_usb_init_device(aru);
-	if (err)
-		goto err_freefw;
-
-	err = ar9170_usb_open(ar);
-	if (err)
-		goto err_unrx;
-
-	err = ar9170_register(ar, &udev->dev);
-
-	ar9170_usb_stop(ar);
-	if (err)
-		goto err_unrx;
-
-	return 0;
-
-err_unrx:
-	ar9170_usb_cancel_urbs(aru);
-
-err_freefw:
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
+	return request_firmware_nowait(THIS_MODULE, 1, "ar9170.fw",
+				       &aru->udev->dev, GFP_KERNEL, aru,
+				       ar9170_usb_firmware_step2);
 err_freehw:
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
@@ -860,12 +896,12 @@ static void ar9170_usb_disconnect(struct usb_interface *intf)
 	ar9170_unregister(&aru->common);
 	ar9170_usb_cancel_urbs(aru);
 
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
 	usb_put_dev(aru->udev);
 	usb_set_intfdata(intf, NULL);
 	ieee80211_free_hw(aru->common.hw);
+
+	release_firmware(aru->init_values);
+	release_firmware(aru->firmware);
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.3


From b08dfd0435333818a03b38867c556ebcbb3abc02 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 29 Jan 2010 11:54:56 -0800
Subject: iwlwifi: load firmware asynchronously before mac80211 registration

At the wireless summit in Portland we discussed a way of
loading firmware asynchronously from ->probe() before
registration to mac80211, in order to register with the
wireless subsystems with complete information in cases
where firmware is required to know parameters.

This is not yet the case in iwlwifi, but for some new
features we're working on it will be the case since
those will only be supported by new firmware images.

Hence, to start with, convert iwlwifi to load firmware
asynchronously from probe, unbinding the device when
firmware loading fails, and only registering with the
wireless subsystems after firmware has been loaded
successfully.

Future patches will hook into this to register the
new firmware capabilities, depending on the firmware
API version.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 157 +++++++++++++++++----------------
 drivers/net/wireless/iwlwifi/iwl-dev.h |   2 +
 2 files changed, 81 insertions(+), 78 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b6992f..47b021477967 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1463,59 +1463,66 @@ static void iwl_nic_start(struct iwl_priv *priv)
 }
 
 
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
+{
+	const char *name_pre = priv->cfg->fw_name_pre;
+
+	if (first)
+		priv->fw_index = priv->cfg->ucode_api_max;
+	else
+		priv->fw_index--;
+
+	if (priv->fw_index < priv->cfg->ucode_api_min) {
+		IWL_ERR(priv, "no suitable firmware found!\n");
+		return -ENOENT;
+	}
+
+	sprintf(priv->firmware_name, "%s%d%s",
+		name_pre, priv->fw_index, ".ucode");
+
+	IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+		       priv->firmware_name);
+
+	return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+				       &priv->pci_dev->dev, GFP_KERNEL, priv,
+				       iwl_ucode_callback);
+}
+
 /**
- * iwl_read_ucode - Read uCode images from disk file.
+ * iwl_ucode_callback - callback when firmware was loaded
  *
- * Copy into buffers for card to fetch via bus-mastering
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
  */
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
 {
+	struct iwl_priv *priv = context;
 	struct iwl_ucode_header *ucode;
-	int ret = -EINVAL, index;
-	const struct firmware *ucode_raw;
-	const char *name_pre = priv->cfg->fw_name_pre;
 	const unsigned int api_max = priv->cfg->ucode_api_max;
 	const unsigned int api_min = priv->cfg->ucode_api_min;
-	char buf[25];
 	u8 *src;
 	size_t len;
 	u32 api_ver, build;
 	u32 inst_size, data_size, init_size, init_data_size, boot_size;
+	int err;
 	u16 eeprom_ver;
 
-	/* Ask kernel firmware_class module to get the boot firmware off disk.
-	 * request_firmware() is synchronous, file is in memory on return. */
-	for (index = api_max; index >= api_min; index--) {
-		sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
-		ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
-		if (ret < 0) {
-			IWL_ERR(priv, "%s firmware file req failed: %d\n",
-				  buf, ret);
-			if (ret == -ENOENT)
-				continue;
-			else
-				goto error;
-		} else {
-			if (index < api_max)
-				IWL_ERR(priv, "Loaded firmware %s, "
-					"which is deprecated. "
-					"Please use API v%u instead.\n",
-					  buf, api_max);
-
-			IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
-				       buf, ucode_raw->size);
-			break;
-		}
+	if (!ucode_raw) {
+		IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+			priv->firmware_name);
+		goto try_again;
 	}
 
-	if (ret < 0)
-		goto error;
+	IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+		       priv->firmware_name, ucode_raw->size);
 
 	/* Make sure that we got at least the v1 header! */
 	if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
 		IWL_ERR(priv, "File size way too small!\n");
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Data from ucode file:  header followed by uCode images */
@@ -1540,10 +1547,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 		IWL_ERR(priv, "Driver unable to support your firmware API. "
 			  "Driver supports v%u, firmware is v%u.\n",
 			  api_max, api_ver);
-		priv->ucode_ver = 0;
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
+
 	if (api_ver != api_max)
 		IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
 			  "got v%u. New firmware can be obtained "
@@ -1585,6 +1591,12 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
 		       boot_size);
 
+	/*
+	 * For any of the failures below (before allocating pci memory)
+	 * we will try to load a version with a smaller API -- maybe the
+	 * user just got a corrupted version of the latest API.
+	 */
+
 	/* Verify size of file vs. image size info in file's header */
 	if (ucode_raw->size !=
 		priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1606,35 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 		IWL_DEBUG_INFO(priv,
 			"uCode file size %d does not match expected size\n",
 			(int)ucode_raw->size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (inst_size > priv->hw_params.max_inst_size) {
 		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
 			       inst_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	if (data_size > priv->hw_params.max_data_size) {
 		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
 				data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_size > priv->hw_params.max_inst_size) {
 		IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
 			init_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_data_size > priv->hw_params.max_data_size) {
 		IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
 		      init_data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (boot_size > priv->hw_params.max_bsm_size) {
 		IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
 			boot_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1718,36 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
 	memcpy(priv->ucode_boot.v_addr, src, len);
 
+	/**************************************************
+	 * This is still part of probe() in a sense...
+	 *
+	 * 9. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	err = iwl_mac_setup_register(priv);
+	if (err)
+		goto out_unbind;
+
+	err = iwl_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
-	return 0;
+	return;
+
+ try_again:
+	/* try next, if any */
+	if (iwl_request_firmware(priv, false))
+		goto out_unbind;
+	release_firmware(ucode_raw);
+	return;
 
  err_pci_alloc:
 	IWL_ERR(priv, "failed to allocate pci memory\n");
-	ret = -ENOMEM;
 	iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+	device_release_driver(&priv->pci_dev->dev);
 	release_firmware(ucode_raw);
-
- error:
-	return ret;
 }
 
 static const char *desc_lookup_text[] = {
@@ -2667,21 +2689,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
-
-	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-	 * ucode filename and max sizes are card-specific. */
-
-	if (!priv->ucode_code.len) {
-		ret = iwl_read_ucode(priv);
-		if (ret) {
-			IWL_ERR(priv, "Could not read microcode: %d\n", ret);
-			mutex_unlock(&priv->mutex);
-			return ret;
-		}
-	}
-
 	ret = __iwl_up(priv);
-
 	mutex_unlock(&priv->mutex);
 
 	if (ret)
@@ -3654,17 +3662,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	iwl_power_initialize(priv);
 	iwl_tt_initialize(priv);
 
-	/**************************************************
-	 * 9. Setup and register with mac80211 and debugfs
-	 **************************************************/
-	err = iwl_mac_setup_register(priv);
+	err = iwl_request_firmware(priv, true);
 	if (err)
 		goto out_remove_sysfs;
 
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
 	return 0;
 
  out_remove_sysfs:
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ab891b958042..6054c5fba0c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1132,6 +1132,7 @@ struct iwl_priv {
 	u8   rev_id;
 
 	/* uCode images, save to reload in case of failure */
+	int fw_index;			/* firmware we're trying to load */
 	u32 ucode_ver;			/* version of ucode, copy of
 					   iwl_ucode.ver */
 	struct fw_desc ucode_code;	/* runtime inst */
@@ -1142,6 +1143,7 @@ struct iwl_priv {
 	struct fw_desc ucode_boot;	/* bootstrap inst */
 	enum ucode_type ucode_type;
 	u8 ucode_write_complete;	/* the image write is complete */
+	char firmware_name[25];
 
 
 	struct iwl_rxon_time_cmd rxon_timing;
-- 
cgit v1.2.3


From 48a29516e8b0b8cd59f5afec90a14f49dd9cf967 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 2 Mar 2010 22:46:10 +0000
Subject: cpmac: use after free

The original code dereferenced "cpmac_mii" after calling
"mdiobus_free(cpmac_mii);"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cpmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index b85c81f60d10..9d489421535e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1290,8 +1290,8 @@ void __devexit cpmac_exit(void)
 {
 	platform_driver_unregister(&cpmac_driver);
 	mdiobus_unregister(cpmac_mii);
-	mdiobus_free(cpmac_mii);
 	iounmap(cpmac_mii->priv);
+	mdiobus_free(cpmac_mii);
 }
 
 module_init(cpmac_init);
-- 
cgit v1.2.3


From 9fe969345b10931319b3f1e7034fbdeb786de234 Mon Sep 17 00:00:00 2001
From: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Date: Tue, 2 Mar 2010 22:37:28 +0000
Subject: be2net: download NCSI section during firmware update

Adding code to update NCSI section while updating firmware on the controller.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_hw.h   |  5 +++--
 drivers/net/benet/be_main.c | 14 +++++++++++---
 2 files changed, 14 insertions(+), 5 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 5ffb149181ad..2d4a4b827637 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -114,8 +114,7 @@
 #define IMG_TYPE_ISCSI_BACKUP		9
 #define IMG_TYPE_FCOE_FW_ACTIVE		10
 #define IMG_TYPE_FCOE_FW_BACKUP 	11
-#define IMG_TYPE_NCSI_BITFILE		13
-#define IMG_TYPE_NCSI_8051		14
+#define IMG_TYPE_NCSI_FW		13
 
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
@@ -127,6 +126,7 @@
 #define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
 #define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
 #define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3       (262144)  /* Max NSCI image sz */
 
 #define FLASH_NCSI_MAGIC		(0x16032009)
 #define FLASH_NCSI_DISABLED		(0)
@@ -144,6 +144,7 @@
 #define FLASH_FCoE_BIOS_START_g2           (524288)
 #define FLASH_REDBOOT_START_g2		  (0)
 
+#define FLASH_NCSI_START_g3		   (15990784)
 #define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
 #define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
 #define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a703ed8e24fe..22f787f2a30b 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1880,8 +1880,9 @@ static int be_flash_data(struct be_adapter *adapter,
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
 	struct flash_comp *pflashcomp;
+	int num_comp;
 
-	struct flash_comp gen3_flash_types[8] = {
+	struct flash_comp gen3_flash_types[9] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -1897,7 +1898,9 @@ static int be_flash_data(struct be_adapter *adapter,
 		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3}
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
+			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
 	};
 	struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -1921,11 +1924,16 @@ static int be_flash_data(struct be_adapter *adapter,
 	if (adapter->generation == BE_GEN3) {
 		pflashcomp = gen3_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g3);
+		num_comp = 9;
 	} else {
 		pflashcomp = gen2_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g2);
+		num_comp = 8;
 	}
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < num_comp; i++) {
+		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
+				memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
+			continue;
 		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
 			(!be_flash_redboot(adapter, fw->data,
 			 pflashcomp[i].offset, pflashcomp[i].size,
-- 
cgit v1.2.3


From bf829370a8d664d87a61697c8a0d6d780c336aa4 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 2 Mar 2010 22:22:41 +0000
Subject: cassini: fix off by one

There are only 6 link_modes.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cassini.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 7cbcfb0ade1c..9bd155e4111c 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5072,7 +5072,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	INIT_WORK(&cp->reset_task, cas_reset_task);
 
 	/* Default link parameters */
-	if (link_mode >= 0 && link_mode <= 6)
+	if (link_mode >= 0 && link_mode < 6)
 		cp->link_cntl = link_modes[link_mode];
 	else
 		cp->link_cntl = BMCR_ANENABLE;
-- 
cgit v1.2.3


From 4d27b87785a743fdae653d395a3a4e763269c53c Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 2 Mar 2010 21:07:24 +0000
Subject: davinci_emac: off by one

This off by one error was found by smatch.

drivers/net/davinci_emac.c +2390 emac_dev_open(13) error: buffer overflow 'priv->mac_addr' 6 <= 6

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/davinci_emac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 1ac9440eb3fb..32960b9b02ae 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2385,7 +2385,7 @@ static int emac_dev_open(struct net_device *ndev)
 	struct emac_priv *priv = netdev_priv(ndev);
 
 	netif_carrier_off(ndev);
-	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+	for (cnt = 0; cnt < ETH_ALEN; cnt++)
 		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
 
 	/* Configuration items */
-- 
cgit v1.2.3


From 4fa004373133ece3d9b1c0a7e243b0e53760b165 Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Mon, 1 Mar 2010 14:42:57 +0530
Subject: mac80211: Fix HT rate control configuration

Handling HT configuration changes involved setting the channel
with the new HT parameters and then issuing a rate_update()
notification to the driver.

This behavior changed after the off-channel changes. Now, the channel
is not updated with the new HT params in enable_ht() - instead, it
is now done when the scan work terminates. This results in the driver
depending on stale information, defaulting to non-HT mode always.

Fix this by passing the new channel type to the driver.

Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/rc.c | 6 +++---
 include/net/mac80211.h              | 3 ++-
 net/mac80211/mlme.c                 | 3 ++-
 net/mac80211/rate.h                 | 5 +++--
 4 files changed, 10 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index ac34a055c713..0e79e58cf4c9 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1323,7 +1323,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 
 static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta, void *priv_sta,
-			    u32 changed)
+			    u32 changed, enum nl80211_channel_type oper_chan_type)
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
@@ -1340,8 +1340,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 		if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
 			return;
 
-		if (sc->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
-		    sc->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
+		if (oper_chan_type == NL80211_CHAN_HT40MINUS ||
+		    oper_chan_type == NL80211_CHAN_HT40PLUS)
 			oper_cw40 = true;
 
 		oper_sgi40 = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 80eb7cc42ce9..45d7d44d7cbe 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2426,7 +2426,8 @@ struct rate_control_ops {
 			  struct ieee80211_sta *sta, void *priv_sta);
 	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta,
-			    void *priv_sta, u32 changed);
+			    void *priv_sta, u32 changed,
+			    enum nl80211_channel_type oper_chan_type);
 	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
 			 void *priv_sta);
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 5a268761e4c5..0ab284c32135 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -177,7 +177,8 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 		sta = sta_info_get(sdata, bssid);
 		if (sta)
 			rate_control_rate_update(local, sband, sta,
-						 IEEE80211_RC_HT_CHANGED);
+						 IEEE80211_RC_HT_CHANGED,
+						 local->oper_channel_type);
 		rcu_read_unlock();
         }
 
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index b6108bca96d4..065a96190e32 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -66,7 +66,8 @@ static inline void rate_control_rate_init(struct sta_info *sta)
 
 static inline void rate_control_rate_update(struct ieee80211_local *local,
 				    struct ieee80211_supported_band *sband,
-				    struct sta_info *sta, u32 changed)
+				    struct sta_info *sta, u32 changed,
+				    enum nl80211_channel_type oper_chan_type)
 {
 	struct rate_control_ref *ref = local->rate_ctrl;
 	struct ieee80211_sta *ista = &sta->sta;
@@ -74,7 +75,7 @@ static inline void rate_control_rate_update(struct ieee80211_local *local,
 
 	if (ref && ref->ops->rate_update)
 		ref->ops->rate_update(ref->priv, sband, ista,
-				      priv_sta, changed);
+				      priv_sta, changed, oper_chan_type);
 }
 
 static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
-- 
cgit v1.2.3


From 31f66be44a657a14e0ab3536e4877c66c9ce031e Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Wed, 3 Mar 2010 17:42:55 +0100
Subject: rt2x00: Export rt2x00soc_probe from rt2x00soc

Export rt2x00soc_probe from rt2x00soc as it is used in rt2800pci.

Otherwise loading rt2800pci gives "rt2800pci: Unknown symbol
rt2x00soc_probe".

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00soc.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index 4efdc96010f6..111c0ff5c6c7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -112,6 +112,7 @@ exit_free_device:
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(rt2x00soc_probe);
 
 int rt2x00soc_remove(struct platform_device *pdev)
 {
-- 
cgit v1.2.3


From 4c020a961a812ffae9846b917304cea504c3a733 Mon Sep 17 00:00:00 2001
From: David Dillow <dave@thedillows.org>
Date: Wed, 3 Mar 2010 16:33:10 +0000
Subject: r8169: use correct barrier between cacheable and non-cacheable memory

r8169 needs certain writes to be visible to other CPUs or the NIC before
touching the hardware, but was using smp_wmb() which is only required to
order cacheable memory access. Switch to wmb() which is required to
order both cacheable and non-cacheable memory.

Noticed by Catalin Marinas and Paul Mackerras.

Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index dfc3573c91bb..9d3ebf3e975e 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4270,7 +4270,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 
 	tp->cur_tx += frags + 1;
 
-	smp_wmb();
+	wmb();
 
 	RTL_W8(TxPoll, NPQ);	/* set polling bit */
 
@@ -4621,7 +4621,7 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
 		 * until it does.
 		 */
 		tp->intr_mask = 0xffff;
-		smp_wmb();
+		wmb();
 		RTL_W16(IntrMask, tp->intr_event);
 	}
 
-- 
cgit v1.2.3


From 0eddba525cf4c3a4aab9feaf36b12b465290d4a7 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 3 Mar 2010 08:18:58 +0000
Subject: gianfar: Fix TX ring processing on SMP machines

Starting with commit a3bc1f11e9b867a4f49505 ("gianfar: Revive SKB
recycling") gianfar driver sooner or later stops transmitting any
packets on SMP machines.

start_xmit() prepares new skb for transmitting, generally it does
three things:

1. sets up all BDs (marks them ready to send), except the first one.
2. stores skb into tx_queue->tx_skbuff so that clean_tx_ring()
   would cleanup it later.
3. sets up the first BD, i.e. marks it ready.

Here is what clean_tx_ring() does:

1. reads skbs from tx_queue->tx_skbuff
2. checks if the *last* BD is ready. If it's still ready [to send]
   then it it isn't transmitted, so clean_tx_ring() returns.
   Otherwise it actually cleanups BDs. All is OK.

Now, if there is just one BD, code flow:

- start_xmit(): stores skb into tx_skbuff. Note that the first BD
  (which is also the last one) isn't marked as ready, yet.
- clean_tx_ring(): sees that skb is not null, *and* its lstatus
  says that it is NOT ready (like if BD was sent), so it cleans
  it up (bad!)
- start_xmit(): marks BD as ready [to send], but it's too late.

We can fix this simply by reordering lstatus/tx_skbuff writes.

Reported-by: Martyn Welch <martyn.welch@ge.com>
Bisected-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Martyn Welch <martyn.welch@ge.com>
Cc: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Cc: Stable <stable@vger.kernel.org> [2.6.33]
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6aa526ee9096..c3f061957c04 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2021,7 +2021,6 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -2053,6 +2052,10 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txbdp_start->lstatus = lstatus;
 
+	eieio(); /* force lstatus write before tx_skbuff */
+
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
+
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
 	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
-- 
cgit v1.2.3


From a6f018e324ba91d0464cca6895447c2b89e6d578 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Wed, 3 Mar 2010 09:49:47 +0000
Subject: cxgb3: fix hot plug removal crash

queue restart tasklets need to be stopped after napi handlers are stopped
since the latter can restart them.  So stop them after stopping napi.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/cxgb3_main.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net')

diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 6fd968abb073..cecdec1551db 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1280,6 +1280,7 @@ static void cxgb_down(struct adapter *adapter)
 
 	free_irq_resources(adapter);
 	quiesce_rx(adapter);
+	t3_sge_stop(adapter);
 	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 }
 
-- 
cgit v1.2.3


From 12c3400a84742f8bb0e4edc822e9ccba58781e0c Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 4 Mar 2010 03:32:16 -0800
Subject: rndis_wlan: correct multicast_list handling V3

My previous patch (655ffee284dfcf9a24ac0343f3e5ee6db85b85c5) added locking in
a bad way. Because rndis_set_oid can sleep, there is need to prepare multicast
addresses into local buffer under netif_addr_lock first, then call
rndis_set_oid outside. This caused reorganizing of the whole function.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/rndis_wlan.c | 66 ++++++++++++++++++++++++---------------
 1 file changed, 41 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 9f6d6bf06b8e..2887047069f2 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1496,51 +1496,67 @@ static void set_multicast_list(struct usbnet *usbdev)
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct dev_mc_list *mclist;
-	__le32 filter;
-	int ret, i, size;
-	char *buf;
+	__le32 filter, basefilter;
+	int ret;
+	char *mc_addrs = NULL;
+	int mc_count;
 
-	filter = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
+	basefilter = filter = RNDIS_PACKET_TYPE_DIRECTED |
+			      RNDIS_PACKET_TYPE_BROADCAST;
 
-	netif_addr_lock_bh(usbdev->net);
 	if (usbdev->net->flags & IFF_PROMISC) {
 		filter |= RNDIS_PACKET_TYPE_PROMISCUOUS |
 			RNDIS_PACKET_TYPE_ALL_LOCAL;
-	} else if (usbdev->net->flags & IFF_ALLMULTI ||
-		   netdev_mc_count(usbdev->net) > priv->multicast_size) {
+	} else if (usbdev->net->flags & IFF_ALLMULTI) {
+		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
+	}
+
+	if (filter != basefilter)
+		goto set_filter;
+
+	/*
+	 * mc_list should be accessed holding the lock, so copy addresses to
+	 * local buffer first.
+	 */
+	netif_addr_lock_bh(usbdev->net);
+	mc_count = netdev_mc_count(usbdev->net);
+	if (mc_count > priv->multicast_size) {
 		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
-	} else if (!netdev_mc_empty(usbdev->net)) {
-		size = min(priv->multicast_size, netdev_mc_count(usbdev->net));
-		buf = kmalloc(size * ETH_ALEN, GFP_KERNEL);
-		if (!buf) {
+	} else if (mc_count) {
+		int i = 0;
+
+		mc_addrs = kmalloc(mc_count * ETH_ALEN, GFP_ATOMIC);
+		if (!mc_addrs) {
 			netdev_warn(usbdev->net,
 				    "couldn't alloc %d bytes of memory\n",
-				    size * ETH_ALEN);
+				    mc_count * ETH_ALEN);
 			netif_addr_unlock_bh(usbdev->net);
 			return;
 		}
 
-		i = 0;
-		netdev_for_each_mc_addr(mclist, usbdev->net) {
-			if (i == size)
-				break;
-			memcpy(buf + i++ * ETH_ALEN, mclist->dmi_addr, ETH_ALEN);
-		}
+		netdev_for_each_mc_addr(mclist, usbdev->net)
+			memcpy(mc_addrs + i++ * ETH_ALEN,
+			       mclist->dmi_addr, ETH_ALEN);
+	}
+	netif_addr_unlock_bh(usbdev->net);
 
-		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, buf,
-								i * ETH_ALEN);
-		if (ret == 0 && i > 0)
+	if (filter != basefilter)
+		goto set_filter;
+
+	if (mc_count) {
+		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, mc_addrs,
+				    mc_count * ETH_ALEN);
+		kfree(mc_addrs);
+		if (ret == 0)
 			filter |= RNDIS_PACKET_TYPE_MULTICAST;
 		else
 			filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
 
 		netdev_dbg(usbdev->net, "OID_802_3_MULTICAST_LIST(%d, max: %d) -> %d\n",
-			   i, priv->multicast_size, ret);
-
-		kfree(buf);
+			   mc_count, priv->multicast_size, ret);
 	}
-	netif_addr_unlock_bh(usbdev->net);
 
+set_filter:
 	ret = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
 							sizeof(filter));
 	if (ret < 0) {
-- 
cgit v1.2.3


From 4b79a1aedcb9dd6e3f27b970dcb553aefcd97254 Mon Sep 17 00:00:00 2001
From: David Brown <davidb@quicinc.com>
Date: Fri, 5 Mar 2010 09:12:34 +0000
Subject: net: smc91x: Support Qualcomm MSM development boards.

Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smc91x.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 54799544bda3..a6ee883d1b0e 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -330,6 +330,20 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #include <unit/smc91111.h>
 
+#elif defined(CONFIG_ARCH_MSM)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
+
 #else
 
 /*
-- 
cgit v1.2.3


From 5fe88eae26dbd24eed73eb0b681e13981fd486b3 Mon Sep 17 00:00:00 2001
From: David Dillow <dave@thedillows.org>
Date: Thu, 4 Mar 2010 04:37:16 +0000
Subject: typhoon: fix incorrect use of smp_wmb()

The typhoon driver was incorrectly using smp_wmb() to order memory
accesses against IO to the NIC in a few instances. Use wmb() instead,
which is required to actually order between memory types.

Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/typhoon.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index e3ddcb8f29df..1cf012d3e072 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -480,7 +480,7 @@ typhoon_hello(struct typhoon *tp)
 		typhoon_inc_cmd_index(&ring->lastWrite, 1);
 
 		INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
-		smp_wmb();
+		wmb();
 		iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
 		spin_unlock(&tp->command_lock);
 	}
@@ -1311,13 +1311,15 @@ typhoon_init_interface(struct typhoon *tp)
 
 	tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr);
 	tp->card_state = Sleeping;
-	smp_wmb();
 
 	tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
 	tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
 
 	spin_lock_init(&tp->command_lock);
 	spin_lock_init(&tp->state_lock);
+
+	/* Force the writes to the shared memory area out before continuing. */
+	wmb();
 }
 
 static void
-- 
cgit v1.2.3


From a80483d3722b603dae8a52495f8d88a7d4b1bf1c Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Fri, 5 Mar 2010 02:21:44 +0000
Subject: e1000e: fix packet corruption and tx hang during NFSv2

when receiving a particular type of NFS v2 UDP traffic, the hardware could
DMA some bad data and then hang, possibly corrupting memory.

Disable the NFS parsing in this hardware, verified to fix the bug.

Originally reported and reproduced by RedHat's Neil Horman
CC: nhorman@tuxdriver.com
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/defines.h |  2 ++
 drivers/net/e1000e/ich8lan.c | 10 ++++++++++
 2 files changed, 12 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index db05ec355749..e301e26d6897 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -320,6 +320,8 @@
 #define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
 
 /* Header split receive */
+#define E1000_RFCTL_NFSW_DIS            0x00000040
+#define E1000_RFCTL_NFSR_DIS            0x00000080
 #define E1000_RFCTL_ACK_DIS             0x00001000
 #define E1000_RFCTL_EXTEN               0x00008000
 #define E1000_RFCTL_IPV6_EX_DIS         0x00010000
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 54d03a0ce3ce..8b5e157e9c87 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2740,6 +2740,16 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 		reg &= ~(1 << 31);
 		ew32(STATUS, reg);
 	}
+
+	/*
+	 * work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+	ew32(RFCTL, reg);
+
+	return;
 }
 
 /**
-- 
cgit v1.2.3


From 3a22813a5aaf8e8c72be575dabe0ba26f9352f4d Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Thu, 4 Mar 2010 10:40:44 +0000
Subject: s2io: Fixing debug message

Currently s2io is dumping debug messages using the interface name
before it was allocated, showing a message like the following:

s2io: eth%d: Ring Mem PHY: 0x7ef80000
s2io: s2io_reset: Resetting XFrame card eth%d

This patch just fixes it, printing the pci bus information for
the card instead of the interface name.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/s2io.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 43bc66aa8405..df70657260dd 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -923,8 +923,8 @@ static int init_shared_mem(struct s2io_nic *nic)
 	tmp_v_addr = mac_control->stats_mem;
 	mac_control->stats_info = (struct stat_block *)tmp_v_addr;
 	memset(tmp_v_addr, 0, size);
-	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
-		  (unsigned long long)tmp_p_addr);
+	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
+		dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr);
 	mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
 	return SUCCESS;
 }
@@ -3480,7 +3480,7 @@ static void s2io_reset(struct s2io_nic *sp)
 	struct swStat *swstats;
 
 	DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
-		  __func__, sp->dev->name);
+		  __func__, pci_name(sp->pdev));
 
 	/* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
-- 
cgit v1.2.3


From 984b3f5746ed2cde3d184651dabf26980f2b66e5 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 5 Mar 2010 13:41:37 -0800
Subject: bitops: rename for_each_bit() to for_each_set_bit()

Rename for_each_bit to for_each_set_bit in the kernel source tree.  To
permit for_each_clear_bit(), should that ever be added.

The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit().  This is a (very) temporary thing to ease the migration.

[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/cpu/perf_event.c            |  2 +-
 arch/x86/kernel/cpu/perf_event_intel.c      |  2 +-
 drivers/dma/ioat/dma.c                      |  2 +-
 drivers/gpio/pl061.c                        |  2 +-
 drivers/gpio/timbgpio.c                     |  2 +-
 drivers/i2c/busses/i2c-designware.c         |  4 ++--
 drivers/mfd/htc-egpio.c                     |  2 +-
 drivers/misc/sgi-xp/xpnet.c                 |  2 +-
 drivers/net/gianfar.c                       | 12 ++++++------
 drivers/net/ixgbe/ixgbe_main.c              |  2 +-
 drivers/net/ixgbevf/ixgbevf_main.c          |  2 +-
 drivers/net/wireless/ath/ar9170/main.c      |  2 +-
 drivers/net/wireless/iwmc3200wifi/debugfs.c |  2 +-
 drivers/net/wireless/iwmc3200wifi/rx.c      |  2 +-
 fs/ocfs2/quota_local.c                      |  2 +-
 include/linux/bitops.h                      |  4 +++-
 kernel/sched_cpupri.c                       |  2 +-
 sound/soc/codecs/uda1380.c                  |  2 +-
 18 files changed, 26 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 641ccb9dddbc..b1fbdeecf6c9 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -676,7 +676,7 @@ static int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 			if (c->weight != w)
 				continue;
 
-			for_each_bit(j, c->idxmsk, X86_PMC_IDX_MAX) {
+			for_each_set_bit(j, c->idxmsk, X86_PMC_IDX_MAX) {
 				if (!test_bit(j, used_mask))
 					break;
 			}
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index cf6590cf4a5f..977e7544738c 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -757,7 +757,7 @@ again:
 
 	inc_irq_stat(apic_perf_irqs);
 	ack = status;
-	for_each_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
+	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
 		struct perf_event *event = cpuc->events[bit];
 
 		clear_bit(bit, (unsigned long *) &status);
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 5d0e42b263df..af14c9a5b8d4 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -71,7 +71,7 @@ static irqreturn_t ioat_dma_do_interrupt(int irq, void *data)
 	}
 
 	attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET);
-	for_each_bit(bit, &attnstatus, BITS_PER_LONG) {
+	for_each_set_bit(bit, &attnstatus, BITS_PER_LONG) {
 		chan = ioat_chan_by_index(instance, bit);
 		tasklet_schedule(&chan->cleanup_task);
 	}
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 4ee4c8367a3f..3ad1eeb49609 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -219,7 +219,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
 		if (pending == 0)
 			continue;
 
-		for_each_bit(offset, &pending, PL061_GPIO_NR)
+		for_each_set_bit(offset, &pending, PL061_GPIO_NR)
 			generic_handle_irq(pl061_to_irq(&chip->gc, offset));
 	}
 	desc->chip->unmask(irq);
diff --git a/drivers/gpio/timbgpio.c b/drivers/gpio/timbgpio.c
index d941f45fe557..4ecba6e5a32d 100644
--- a/drivers/gpio/timbgpio.c
+++ b/drivers/gpio/timbgpio.c
@@ -175,7 +175,7 @@ static void timbgpio_irq(unsigned int irq, struct irq_desc *desc)
 	ipr = ioread32(tgpio->membase + TGPIO_IPR);
 	iowrite32(ipr, tgpio->membase + TGPIO_ICR);
 
-	for_each_bit(offset, &ipr, tgpio->gpio.ngpio)
+	for_each_set_bit(offset, &ipr, tgpio->gpio.ngpio)
 		generic_handle_irq(timbgpio_to_irq(&tgpio->gpio, offset));
 }
 
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index 9e18ef97f156..3e72b69aa7f8 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -497,13 +497,13 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 	int i;
 
 	if (abort_source & DW_IC_TX_ABRT_NOACK) {
-		for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
 			dev_dbg(dev->dev,
 				"%s: %s\n", __func__, abort_sources[i]);
 		return -EREMOTEIO;
 	}
 
-	for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+	for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
 		dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
 
 	if (abort_source & DW_IC_TX_ARB_LOST)
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index aa266e1f69b2..addb846c1e34 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -108,7 +108,7 @@ static void egpio_handler(unsigned int irq, struct irq_desc *desc)
 	ack_irqs(ei);
 	/* Process all set pins. */
 	readval &= ei->irqs_enabled;
-	for_each_bit(irqpin, &readval, ei->nirqs) {
+	for_each_set_bit(irqpin, &readval, ei->nirqs) {
 		/* Run irq handler */
 		pr_debug("got IRQ %d\n", irqpin);
 		irq = ei->irq_start + irqpin;
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 16f0abda1423..57b152f8d1b9 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -475,7 +475,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (skb->data[0] == 0xff) {
 		/* we are being asked to broadcast to all partitions */
-		for_each_bit(dest_partid, xpnet_broadcast_partitions,
+		for_each_set_bit(dest_partid, xpnet_broadcast_partitions,
 			     xp_max_npartitions) {
 
 			xpnet_send(skb, queued_msg, start_addr, end_addr,
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6aa526ee9096..61a7b4351e78 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -998,7 +998,7 @@ static int gfar_probe(struct of_device *ofdev,
 	}
 
 	/* Need to reverse the bit maps as  bit_map's MSB is q0
-	 * but, for_each_bit parses from right to left, which
+	 * but, for_each_set_bit parses from right to left, which
 	 * basically reverses the queue numbers */
 	for (i = 0; i< priv->num_grps; i++) {
 		priv->gfargrp[i].tx_bit_map = reverse_bitmap(
@@ -1011,7 +1011,7 @@ static int gfar_probe(struct of_device *ofdev,
 	 * also assign queues to groups */
 	for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
 		priv->gfargrp[grp_idx].num_rx_queues = 0x0;
-		for_each_bit(i, &priv->gfargrp[grp_idx].rx_bit_map,
+		for_each_set_bit(i, &priv->gfargrp[grp_idx].rx_bit_map,
 				priv->num_rx_queues) {
 			priv->gfargrp[grp_idx].num_rx_queues++;
 			priv->rx_queue[i]->grp = &priv->gfargrp[grp_idx];
@@ -1019,7 +1019,7 @@ static int gfar_probe(struct of_device *ofdev,
 			rqueue = rqueue | ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
 		}
 		priv->gfargrp[grp_idx].num_tx_queues = 0x0;
-		for_each_bit (i, &priv->gfargrp[grp_idx].tx_bit_map,
+		for_each_set_bit(i, &priv->gfargrp[grp_idx].tx_bit_map,
 				priv->num_tx_queues) {
 			priv->gfargrp[grp_idx].num_tx_queues++;
 			priv->tx_queue[i]->grp = &priv->gfargrp[grp_idx];
@@ -1709,7 +1709,7 @@ void gfar_configure_coalescing(struct gfar_private *priv,
 
 	if (priv->mode == MQ_MG_MODE) {
 		baddr = &regs->txic0;
-		for_each_bit (i, &tx_mask, priv->num_tx_queues) {
+		for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
 			if (likely(priv->tx_queue[i]->txcoalescing)) {
 				gfar_write(baddr + i, 0);
 				gfar_write(baddr + i, priv->tx_queue[i]->txic);
@@ -1717,7 +1717,7 @@ void gfar_configure_coalescing(struct gfar_private *priv,
 		}
 
 		baddr = &regs->rxic0;
-		for_each_bit (i, &rx_mask, priv->num_rx_queues) {
+		for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
 			if (likely(priv->rx_queue[i]->rxcoalescing)) {
 				gfar_write(baddr + i, 0);
 				gfar_write(baddr + i, priv->rx_queue[i]->rxic);
@@ -2607,7 +2607,7 @@ static int gfar_poll(struct napi_struct *napi, int budget)
 		budget_per_queue = left_over_budget/num_queues;
 		left_over_budget = 0;
 
-		for_each_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
+		for_each_set_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
 			if (test_bit(i, &serviced_queues))
 				continue;
 			rx_queue = priv->rx_queue[i];
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 45e3532b166f..684af371462d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1050,7 +1050,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 	 */
 	for (v_idx = 0; v_idx < q_vectors; v_idx++) {
 		q_vector = adapter->q_vector[v_idx];
-		/* XXX for_each_bit(...) */
+		/* XXX for_each_set_bit(...) */
 		r_idx = find_first_bit(q_vector->rxr_idx,
 		                       adapter->num_rx_queues);
 
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 235b5fd4b8d4..ca653c49b765 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -751,7 +751,7 @@ static void ixgbevf_configure_msix(struct ixgbevf_adapter *adapter)
 	 */
 	for (v_idx = 0; v_idx < q_vectors; v_idx++) {
 		q_vector = adapter->q_vector[v_idx];
-		/* XXX for_each_bit(...) */
+		/* XXX for_each_set_bit(...) */
 		r_idx = find_first_bit(q_vector->rxr_idx,
 				       adapter->num_rx_queues);
 
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 8a964f130367..a6452af9c6c5 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -394,7 +394,7 @@ static void ar9170_tx_fake_ampdu_status(struct ar9170 *ar)
 		ieee80211_tx_status_irqsafe(ar->hw, skb);
 	}
 
-	for_each_bit(i, &queue_bitmap, BITS_PER_BYTE) {
+	for_each_set_bit(i, &queue_bitmap, BITS_PER_BYTE) {
 #ifdef AR9170_QUEUE_STOP_DEBUG
 		printk(KERN_DEBUG "%s: wake queue %d\n",
 		       wiphy_name(ar->hw->wiphy), i);
diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c
index be992ca41cf1..c29c994de0e2 100644
--- a/drivers/net/wireless/iwmc3200wifi/debugfs.c
+++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c
@@ -89,7 +89,7 @@ static int iwm_debugfs_dbg_modules_write(void *data, u64 val)
 	for (i = 0; i < __IWM_DM_NR; i++)
 		iwm->dbg.dbg_module[i] = 0;
 
-	for_each_bit(bit, &iwm->dbg.dbg_modules, __IWM_DM_NR)
+	for_each_set_bit(bit, &iwm->dbg.dbg_modules, __IWM_DM_NR)
 		iwm->dbg.dbg_module[bit] = iwm->dbg.dbg_level;
 
 	return 0;
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index ad8f7eabb5aa..8456b4dbd146 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1116,7 +1116,7 @@ static int iwm_ntf_stop_resume_tx(struct iwm_priv *iwm, u8 *buf,
 		return -EINVAL;
 	}
 
-	for_each_bit(bit, (unsigned long *)&tid_msk, IWM_UMAC_TID_NR) {
+	for_each_set_bit(bit, (unsigned long *)&tid_msk, IWM_UMAC_TID_NR) {
 		tid_info = &sta_info->tid_info[bit];
 
 		mutex_lock(&tid_info->mutex);
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 21f9e71223ca..a6467f3d262e 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -457,7 +457,7 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 			break;
 		}
 		dchunk = (struct ocfs2_local_disk_chunk *)hbh->b_data;
-		for_each_bit(bit, rchunk->rc_bitmap, ol_chunk_entries(sb)) {
+		for_each_set_bit(bit, rchunk->rc_bitmap, ol_chunk_entries(sb)) {
 			qbh = NULL;
 			status = ocfs2_read_quota_block(lqinode,
 						ol_dqblk_block(sb, chunk, bit),
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 25b8b2f33ae9..b79389879238 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -16,11 +16,13 @@
  */
 #include <asm/bitops.h>
 
-#define for_each_bit(bit, addr, size) \
+#define for_each_set_bit(bit, addr, size) \
 	for ((bit) = find_first_bit((addr), (size)); \
 	     (bit) < (size); \
 	     (bit) = find_next_bit((addr), (size), (bit) + 1))
 
+/* Temporary */
+#define for_each_bit(bit, addr, size) for_each_set_bit(bit, addr, size)
 
 static __inline__ int get_bitmask_order(unsigned int count)
 {
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index eeb3506c4834..82095bf2099f 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -47,7 +47,7 @@ static int convert_prio(int prio)
 }
 
 #define for_each_cpupri_active(array, idx)                    \
-	for_each_bit(idx, array, CPUPRI_NR_PRIORITIES)
+	for_each_set_bit(idx, array, CPUPRI_NR_PRIORITIES)
 
 /**
  * cpupri_find - find the best (lowest-pri) CPU in the system
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index a2763c2e7348..9cd0a66b7663 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -137,7 +137,7 @@ static void uda1380_flush_work(struct work_struct *work)
 {
 	int bit, reg;
 
-	for_each_bit(bit, &uda1380_cache_dirty, UDA1380_CACHEREGNUM - 0x10) {
+	for_each_set_bit(bit, &uda1380_cache_dirty, UDA1380_CACHEREGNUM - 0x10) {
 		reg = 0x10 + bit;
 		pr_debug("uda1380: flush reg %x val %x:\n", reg,
 				uda1380_read_reg_cache(uda1380_codec, reg));
-- 
cgit v1.2.3


From b96b894c518bc7399e6b86b635b5e8cd7356a8e9 Mon Sep 17 00:00:00 2001
From: "Figo.zhang" <figo1802@gmail.com>
Date: Fri, 5 Mar 2010 16:36:02 +0000
Subject: fix a race in ks8695_poll

fix a race at the end of NAPI processing in ks8695_poll() function.

Signed-off-by:Figo.zhang <figo1802@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/arm/ks8695net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 8ca639127dbc..a1d4188c430b 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -575,9 +575,9 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
 	if (work_done < budget) {
 		unsigned long flags;
 		spin_lock_irqsave(&ksp->rx_lock, flags);
+		__napi_complete(napi);
 		/*enable rx interrupt*/
 		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
-		__napi_complete(napi);
 		spin_unlock_irqrestore(&ksp->rx_lock, flags);
 	}
 	return work_done;
-- 
cgit v1.2.3


From ea3fb371b2a391958670f2a65e1203f7dba61671 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 6 Mar 2010 01:11:38 +0000
Subject: ems_usb: cleanup: remove uneeded check

"skb" is alway non-null here, but even if it were null the check isn't
needed because dev_kfree_skb() can handle it.

This eliminates a smatch warning about dereferencing a variable before
checking that it is non-null.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/usb/ems_usb.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 11c87840cc00..33451092b8e8 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -876,9 +876,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	return NETDEV_TX_OK;
 
 nomem:
-	if (skb)
-		dev_kfree_skb(skb);
-
+	dev_kfree_skb(skb);
 	stats->tx_dropped++;
 
 	return NETDEV_TX_OK;
-- 
cgit v1.2.3


From 0e2b807234c42fab59f98ec913db30dfda0e63a7 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sun, 7 Mar 2010 02:35:42 +0000
Subject: irda-usb: add error handling and fix leak

If the call to kcalloc() fails then we should return -ENOMEM.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/irda/irda-usb.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e8e33bb9d876..2c9b3af16612 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1651,6 +1651,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	self->rx_urb = kcalloc(self->max_rx_urb, sizeof(struct urb *),
 				GFP_KERNEL);
+	if (!self->rx_urb)
+		goto err_free_net;
 
 	for (i = 0; i < self->max_rx_urb; i++) {
 		self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -1783,6 +1785,8 @@ err_out_2:
 err_out_1:
 	for (i = 0; i < self->max_rx_urb; i++)
 		usb_free_urb(self->rx_urb[i]);
+	kfree(self->rx_urb);
+err_free_net:
 	free_netdev(net);
 err_out:
 	return ret;
-- 
cgit v1.2.3


From e7111eac8ebda724d1e4d9e6aaf4569744a584d5 Mon Sep 17 00:00:00 2001
From: Petko Manolov <petkan@nucleusys.com>
Date: Sun, 7 Mar 2010 06:10:01 +0000
Subject: another pegasus usb net device

This one removes trailing whitespace in pegasus.h and more importantly
adds new Pegasus compatible device.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/pegasus.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
index 5d02f0200737..b90d8766ab74 100644
--- a/drivers/net/usb/pegasus.h
+++ b/drivers/net/usb/pegasus.h
@@ -177,7 +177,7 @@ PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II ) 	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
@@ -208,6 +208,8 @@ PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
  */
 PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
@@ -249,7 +251,7 @@ PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
 PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
-- 
cgit v1.2.3


From 30765d0502905a9248e5de72fc7ac83c23422861 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sun, 7 Mar 2010 00:55:26 +0000
Subject: cpmac: fix the receiving of 802.1q frames

Despite what the comment above CPMAC_SKB_SIZE says, the hardware also
needs to account for the FCS length in a received frame. This patch fix
the receiving of 802.1q frames which have 4 more bytes. While at it
unhardcode the definition and use the one from if_vlan.h.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cpmac.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 9d489421535e..55ee055d3321 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 
 #include <linux/netdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
@@ -56,8 +57,8 @@ MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
 MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
 
 #define CPMAC_VERSION "0.5.1"
-/* frame size + 802.1q tag */
-#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + 4)
+/* frame size + 802.1q tag + FCS size */
+#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 #define CPMAC_QUEUES	8
 
 /* Ethernet registers */
-- 
cgit v1.2.3


From 9fba1c31f4f3f9f860a4afee0b409cde27d06741 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sun, 7 Mar 2010 00:55:47 +0000
Subject: cpmac: fallback to switch mode if no PHY chip found

If we were unable to detect a PHY on any of the MDIO bus id we tried instead of
bailing out with -ENODEV, assume the MAC is connected to a switch and use MDIO
bus 0. This unbreaks quite a lot of devices out there whose switch cannot be
detected.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cpmac.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 55ee055d3321..baeb5bab05b5 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1137,8 +1137,9 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 	}
 
 	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present\n");
-		return -ENODEV;
+		dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n");
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+		phy_id = pdev->id;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
-- 
cgit v1.2.3


From 25dc27d17dc868aae78fd03bef3113cf586b12e5 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sun, 7 Mar 2010 00:55:50 +0000
Subject: cpmac: bump version to 0.5.2

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cpmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index baeb5bab05b5..60777fd90b33 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -56,7 +56,7 @@ module_param(dumb_switch, int, 0444);
 MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
 MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
 
-#define CPMAC_VERSION "0.5.1"
+#define CPMAC_VERSION "0.5.2"
 /* frame size + 802.1q tag + FCS size */
 #define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 #define CPMAC_QUEUES	8
-- 
cgit v1.2.3


From 28812fe11a21826ba4c97c6c7971a619987cd912 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Tue, 5 Jan 2010 12:48:07 +0100
Subject: driver-core: Add attribute argument to class_attribute show/store

Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.

Also drivers can extend the attributes with own data fields
and use that in the low level function.

This makes the class attributes the same as sysdev_class attributes
and plain attributes.

This will allow further cleanups in drivers.

Full tree sweep converting all users.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/class.c                  |  4 ++--
 drivers/base/cpu.c                    |  8 ++++++--
 drivers/base/firmware_class.c         |  8 ++++++--
 drivers/base/memory.c                 | 11 ++++++++---
 drivers/block/osdblk.c                | 12 +++++++++---
 drivers/block/pktcdvd.c               | 12 +++++++++---
 drivers/gpio/gpiolib.c                |  8 ++++++--
 drivers/gpu/drm/drm_sysfs.c           |  3 ++-
 drivers/infiniband/core/ucm.c         |  4 +++-
 drivers/infiniband/core/user_mad.c    |  4 +++-
 drivers/infiniband/core/uverbs_main.c |  4 +++-
 drivers/misc/phantom.c                |  2 +-
 drivers/mtd/ubi/build.c               |  3 ++-
 drivers/net/bonding/bond_sysfs.c      |  5 ++++-
 drivers/staging/asus_oled/asus_oled.c |  4 +++-
 drivers/uwb/driver.c                  |  5 ++++-
 include/linux/device.h                |  6 ++++--
 net/bluetooth/l2cap.c                 |  4 +++-
 net/bluetooth/rfcomm/core.c           |  4 +++-
 net/bluetooth/rfcomm/sock.c           |  4 +++-
 net/bluetooth/sco.c                   |  4 +++-
 21 files changed, 87 insertions(+), 32 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/base/class.c b/drivers/base/class.c
index 6e2c3b064f53..34a2de9c5385 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -31,7 +31,7 @@ static ssize_t class_attr_show(struct kobject *kobj, struct attribute *attr,
 	ssize_t ret = -EIO;
 
 	if (class_attr->show)
-		ret = class_attr->show(cp->class, buf);
+		ret = class_attr->show(cp->class, class_attr, buf);
 	return ret;
 }
 
@@ -43,7 +43,7 @@ static ssize_t class_attr_store(struct kobject *kobj, struct attribute *attr,
 	ssize_t ret = -EIO;
 
 	if (class_attr->store)
-		ret = class_attr->store(cp->class, buf, count);
+		ret = class_attr->store(cp->class, class_attr, buf, count);
 	return ret;
 }
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index fb456b729803..9121c77b77fa 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -79,13 +79,17 @@ void unregister_cpu(struct cpu *cpu)
 }
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static ssize_t cpu_probe_store(struct class *class, const char *buf,
+static ssize_t cpu_probe_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf,
 			       size_t count)
 {
 	return arch_cpu_probe(buf, count);
 }
 
-static ssize_t cpu_release_store(struct class *class, const char *buf,
+static ssize_t cpu_release_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf,
 				 size_t count)
 {
 	return arch_cpu_release(buf, count);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index a95024166b66..6604fb33d072 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -69,7 +69,9 @@ fw_load_abort(struct firmware_priv *fw_priv)
 }
 
 static ssize_t
-firmware_timeout_show(struct class *class, char *buf)
+firmware_timeout_show(struct class *class,
+		      struct class_attribute *attr,
+		      char *buf)
 {
 	return sprintf(buf, "%d\n", loading_timeout);
 }
@@ -87,7 +89,9 @@ firmware_timeout_show(struct class *class, char *buf)
  *	Note: zero means 'wait forever'.
  **/
 static ssize_t
-firmware_timeout_store(struct class *class, const char *buf, size_t count)
+firmware_timeout_store(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	loading_timeout = simple_strtol(buf, NULL, 10);
 	if (loading_timeout < 0)
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 563656ad75a1..495f15e92d4c 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -331,7 +331,8 @@ static int block_size_init(void)
  */
 #ifdef CONFIG_ARCH_MEMORY_PROBE
 static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct class *class, struct class_attribute *attr,
+		   const char *buf, size_t count)
 {
 	u64 phys_addr;
 	int nid;
@@ -368,7 +369,9 @@ static inline int memory_probe_init(void)
 
 /* Soft offline a page */
 static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -385,7 +388,9 @@ store_soft_offline_page(struct class *class, const char *buf, size_t count)
 
 /* Forcibly offline a page, including killing processes. */
 static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index a808b1530b3b..eb2091aa1c19 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -476,7 +476,9 @@ static void class_osdblk_release(struct class *cls)
 	kfree(cls);
 }
 
-static ssize_t class_osdblk_list(struct class *c, char *data)
+static ssize_t class_osdblk_list(struct class *c,
+				struct class_attribute *attr,
+				char *data)
 {
 	int n = 0;
 	struct list_head *tmp;
@@ -500,7 +502,9 @@ static ssize_t class_osdblk_list(struct class *c, char *data)
 	return n;
 }
 
-static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+static ssize_t class_osdblk_add(struct class *c,
+				struct class_attribute *attr,
+				const char *buf, size_t count)
 {
 	struct osdblk_device *osdev;
 	ssize_t rc;
@@ -592,7 +596,9 @@ err_out_mod:
 	return rc;
 }
 
-static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+static ssize_t class_osdblk_remove(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	struct osdblk_device *osdev = NULL;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index b72935b8f203..73d815d3f1b2 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -337,7 +337,9 @@ static void class_pktcdvd_release(struct class *cls)
 {
 	kfree(cls);
 }
-static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
+static ssize_t class_pktcdvd_show_map(struct class *c,
+					struct class_attribute *attr,
+					char *data)
 {
 	int n = 0;
 	int idx;
@@ -356,7 +358,9 @@ static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
 	return n;
 }
 
-static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_add(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
@@ -376,7 +380,9 @@ static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
 	return -EINVAL;
 }
 
-static ssize_t class_pktcdvd_store_remove(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_remove(struct class *c,
+					  struct class_attribute *attr,
+					  const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9006fdb26fea..6d1b86661e63 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -623,7 +623,9 @@ static const struct attribute_group gpiochip_attr_group = {
  * /sys/class/gpio/unexport ... write-only
  *	integer N ... number of GPIO to unexport
  */
-static ssize_t export_store(struct class *class, const char *buf, size_t len)
+static ssize_t export_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
@@ -653,7 +655,9 @@ done:
 	return status ? : len;
 }
 
-static ssize_t unexport_store(struct class *class, const char *buf, size_t len)
+static ssize_t unexport_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 7e42b7e9d43a..b95aaf23596e 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -71,7 +71,8 @@ static int drm_class_resume(struct device *dev)
 }
 
 /* Display the version of drm_core. This doesn't work right in current design */
-static ssize_t version_show(struct class *dev, char *buf)
+static ssize_t version_show(struct class *dev, struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%s %d.%d.%d %s\n", CORE_NAME, CORE_MAJOR,
 		       CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 1b09b735c5a8..02e209ff33fd 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1336,7 +1336,9 @@ static void ib_ucm_remove_one(struct ib_device *device)
 	device_unregister(&ucm_dev->dev);
 }
 
-static ssize_t show_abi_version(struct class *class, char *buf)
+static ssize_t show_abi_version(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION);
 }
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 02d360cfc2f7..d0de8f265f45 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -965,7 +965,9 @@ static ssize_t show_port(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR(port, S_IRUGO, show_port, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
+static ssize_t show_abi_version(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION);
 }
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 4fa2e6516441..60879399207a 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -691,7 +691,9 @@ static ssize_t show_dev_abi_version(struct device *device,
 }
 static DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
+static ssize_t show_abi_version(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", IB_USER_VERBS_ABI_VERSION);
 }
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 04c27266f567..d30ae9560309 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -497,7 +497,7 @@ static struct pci_driver phantom_pci_driver = {
 	.resume = phantom_resume
 };
 
-static ssize_t phantom_show_version(struct class *cls, char *buf)
+static ssize_t phantom_show_version(struct class *cls, struct class_attribute *attr, char *buf)
 {
 	return sprintf(buf, PHANTOM_VERSION "\n");
 }
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index bc45ef9af17d..fad40aa6f099 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -89,7 +89,8 @@ DEFINE_MUTEX(ubi_devices_mutex);
 static DEFINE_SPINLOCK(ubi_devices_lock);
 
 /* "Show" method for files in '/<sysfs>/class/ubi/' */
-static ssize_t ubi_version_show(struct class *class, char *buf)
+static ssize_t ubi_version_show(struct class *class, struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", UBI_VERSION);
 }
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 5acd557cea9b..b8bec086daa1 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -51,7 +51,9 @@
  * "show" function for the bond_masters attribute.
  * The class parameter is ignored.
  */
-static ssize_t bonding_show_bonds(struct class *cls, char *buf)
+static ssize_t bonding_show_bonds(struct class *cls,
+				  struct class_attribute *attr,
+				  char *buf)
 {
 	struct net *net = current->nsproxy->net_ns;
 	struct bond_net *bn = net_generic(net, bond_net_id);
@@ -98,6 +100,7 @@ static struct net_device *bond_get_by_name(struct net *net, const char *ifname)
  */
 
 static ssize_t bonding_store_bonds(struct class *cls,
+				   struct class_attribute *attr,
 				   const char *buffer, size_t count)
 {
 	struct net *net = current->nsproxy->net_ns;
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index cadb6f7321ad..7d93f50a0a64 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -770,7 +770,9 @@ static struct usb_driver oled_driver = {
 	.id_table =	id_table,
 };
 
-static ssize_t version_show(struct class *dev, char *buf)
+static ssize_t version_show(struct class *dev,
+			    struct class_attribute *attr,
+			    char *buf)
 {
 	return sprintf(buf, ASUS_OLED_UNDERSCORE_NAME " %s\n",
 		       ASUS_OLED_VERSION);
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index da77e41de990..08bd6dbfd4a6 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -74,13 +74,16 @@
 unsigned long beacon_timeout_ms = 500;
 
 static
-ssize_t beacon_timeout_ms_show(struct class *class, char *buf)
+ssize_t beacon_timeout_ms_show(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
 }
 
 static
 ssize_t beacon_timeout_ms_store(struct class *class,
+				struct class_attribute *attr,
 				const char *buf, size_t size)
 {
 	unsigned long bt;
diff --git a/include/linux/device.h b/include/linux/device.h
index b30527db3ac0..190f8d30d1d3 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -251,8 +251,10 @@ extern struct device *class_find_device(struct class *class,
 
 struct class_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct class *class, char *buf);
-	ssize_t (*store)(struct class *class, const char *buf, size_t count);
+	ssize_t (*show)(struct class *class, struct class_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct class *class, struct class_attribute *attr,
+			const char *buf, size_t count);
 };
 
 #define CLASS_ATTR(_name, _mode, _show, _store)			\
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 400efa26ddba..4db7ae2fe07d 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -3937,7 +3937,9 @@ drop:
 	return 0;
 }
 
-static ssize_t l2cap_sysfs_show(struct class *dev, char *buf)
+static ssize_t l2cap_sysfs_show(struct class *dev,
+				struct class_attribute *attr,
+				char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 89f4a59eb82b..db8a68e1a5ba 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2098,7 +2098,9 @@ static struct hci_cb rfcomm_cb = {
 	.security_cfm	= rfcomm_security_cfm
 };
 
-static ssize_t rfcomm_dlc_sysfs_show(struct class *dev, char *buf)
+static ssize_t rfcomm_dlc_sysfs_show(struct class *dev,
+				     struct class_attribute *attr,
+				     char *buf)
 {
 	struct rfcomm_session *s;
 	struct list_head *pp, *p;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 4b5968dda673..ca87d6ac6a20 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -1061,7 +1061,9 @@ done:
 	return result;
 }
 
-static ssize_t rfcomm_sock_sysfs_show(struct class *dev, char *buf)
+static ssize_t rfcomm_sock_sysfs_show(struct class *dev,
+				      struct class_attribute *attr,
+				      char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index dd8f6ec57dce..f93b939539bc 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -953,7 +953,9 @@ drop:
 	return 0;
 }
 
-static ssize_t sco_sysfs_show(struct class *dev, char *buf)
+static ssize_t sco_sysfs_show(struct class *dev,
+				struct class_attribute *attr,
+				char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
-- 
cgit v1.2.3


From 52cf25d0ab7f78eeecc59ac652ed5090f69b619e Mon Sep 17 00:00:00 2001
From: Emese Revfy <re.emese@gmail.com>
Date: Tue, 19 Jan 2010 02:58:23 +0100
Subject: Driver core: Constify struct sysfs_ops in struct kobj_type

Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/kobject.txt             | 2 +-
 arch/ia64/kernel/topology.c           | 2 +-
 arch/powerpc/kernel/cacheinfo.c       | 2 +-
 arch/sh/kernel/cpu/sh4/sq.c           | 2 +-
 arch/x86/kernel/cpu/intel_cacheinfo.c | 2 +-
 arch/x86/kernel/cpu/mcheck/mce_amd.c  | 2 +-
 block/blk-integrity.c                 | 2 +-
 block/blk-sysfs.c                     | 2 +-
 block/elevator.c                      | 2 +-
 drivers/base/bus.c                    | 4 ++--
 drivers/base/class.c                  | 2 +-
 drivers/base/core.c                   | 2 +-
 drivers/base/sys.c                    | 4 ++--
 drivers/block/pktcdvd.c               | 2 +-
 drivers/cpufreq/cpufreq.c             | 2 +-
 drivers/cpuidle/sysfs.c               | 4 ++--
 drivers/dma/ioat/dma.c                | 2 +-
 drivers/dma/ioat/dma.h                | 2 +-
 drivers/edac/edac_device_sysfs.c      | 6 +++---
 drivers/edac/edac_mc_sysfs.c          | 4 ++--
 drivers/edac/edac_pci_sysfs.c         | 4 ++--
 drivers/firmware/edd.c                | 2 +-
 drivers/firmware/efivars.c            | 2 +-
 drivers/firmware/iscsi_ibft.c         | 2 +-
 drivers/firmware/memmap.c             | 2 +-
 drivers/gpu/drm/ttm/ttm_bo.c          | 2 +-
 drivers/gpu/drm/ttm/ttm_memory.c      | 2 +-
 drivers/infiniband/core/cm.c          | 2 +-
 drivers/infiniband/core/sysfs.c       | 2 +-
 drivers/md/dm-sysfs.c                 | 2 +-
 drivers/md/md.c                       | 4 ++--
 drivers/net/ibmveth.c                 | 2 +-
 drivers/net/iseries_veth.c            | 4 ++--
 drivers/parisc/pdc_stable.c           | 2 +-
 drivers/pci/hotplug/fakephp.c         | 2 +-
 drivers/pci/slot.c                    | 2 +-
 drivers/uio/uio.c                     | 4 ++--
 drivers/uwb/wlp/sysfs.c               | 3 +--
 drivers/video/omap2/dss/manager.c     | 2 +-
 drivers/video/omap2/dss/overlay.c     | 2 +-
 drivers/xen/sys-hypervisor.c          | 2 +-
 fs/btrfs/sysfs.c                      | 4 ++--
 fs/dlm/lockspace.c                    | 2 +-
 fs/ext4/super.c                       | 2 +-
 fs/gfs2/sys.c                         | 2 +-
 fs/ocfs2/cluster/masklog.c            | 2 +-
 fs/sysfs/file.c                       | 8 ++++----
 include/linux/kobject.h               | 4 ++--
 kernel/params.c                       | 2 +-
 lib/kobject.c                         | 2 +-
 mm/slub.c                             | 2 +-
 net/bridge/br_private.h               | 2 +-
 net/bridge/br_sysfs_if.c              | 2 +-
 samples/kobject/kset-example.c        | 2 +-
 54 files changed, 69 insertions(+), 70 deletions(-)

(limited to 'drivers/net')

diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index c79ab996dada..bdb13817e1e9 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -266,7 +266,7 @@ kobj_type:
 
     struct kobj_type {
 	    void (*release)(struct kobject *);
-	    struct sysfs_ops	*sysfs_ops;
+	    const struct sysfs_ops *sysfs_ops;
 	    struct attribute	**default_attrs;
     };
 
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 8f060352e129..b3a5818088d9 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -282,7 +282,7 @@ static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char *
 	return ret;
 }
 
-static struct sysfs_ops cache_sysfs_ops = {
+static const struct sysfs_ops cache_sysfs_ops = {
 	.show   = cache_show
 };
 
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index bb37b1d19a58..01fe9ce28379 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -642,7 +642,7 @@ static struct kobj_attribute *cache_index_opt_attrs[] = {
 	&cache_assoc_attr,
 };
 
-static struct sysfs_ops cache_index_ops = {
+static const struct sysfs_ops cache_index_ops = {
 	.show = cache_index_show,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index fc065f9da6e5..14726eef1ce0 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -326,7 +326,7 @@ static struct attribute *sq_sysfs_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops sq_sysfs_ops = {
+static const struct sysfs_ops sq_sysfs_ops = {
 	.show	= sq_sysfs_show,
 	.store	= sq_sysfs_store,
 };
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index eddb1bdd1b8f..b3eeb66c0a51 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -903,7 +903,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show   = show,
 	.store  = store,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 83a3d1f4efca..cda932ca3ade 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -388,7 +388,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops threshold_ops = {
+static const struct sysfs_ops threshold_ops = {
 	.show			= show,
 	.store			= store,
 };
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 15c630813b1c..96e83c2bdb94 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -278,7 +278,7 @@ static struct attribute *integrity_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops integrity_ops = {
+static const struct sysfs_ops integrity_ops = {
 	.show	= &integrity_attr_show,
 	.store	= &integrity_attr_store,
 };
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index e85442415db3..2ae2cb3f362f 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -450,7 +450,7 @@ static void blk_release_queue(struct kobject *kobj)
 	kmem_cache_free(blk_requestq_cachep, q);
 }
 
-static struct sysfs_ops queue_sysfs_ops = {
+static const struct sysfs_ops queue_sysfs_ops = {
 	.show	= queue_attr_show,
 	.store	= queue_attr_store,
 };
diff --git a/block/elevator.c b/block/elevator.c
index ee3a883840f2..df75676f6671 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -892,7 +892,7 @@ elv_attr_store(struct kobject *kobj, struct attribute *attr,
 	return error;
 }
 
-static struct sysfs_ops elv_sysfs_ops = {
+static const struct sysfs_ops elv_sysfs_ops = {
 	.show	= elv_attr_show,
 	.store	= elv_attr_store,
 };
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 2afe599eb35d..cca1aa10054c 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -70,7 +70,7 @@ static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops driver_sysfs_ops = {
+static const struct sysfs_ops driver_sysfs_ops = {
 	.show	= drv_attr_show,
 	.store	= drv_attr_store,
 };
@@ -115,7 +115,7 @@ static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops bus_sysfs_ops = {
+static const struct sysfs_ops bus_sysfs_ops = {
 	.show	= bus_attr_show,
 	.store	= bus_attr_store,
 };
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 2e297cc4cd3d..0147f476b8a9 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -63,7 +63,7 @@ static void class_release(struct kobject *kobj)
 	kfree(cp);
 }
 
-static struct sysfs_ops class_sysfs_ops = {
+static const struct sysfs_ops class_sysfs_ops = {
 	.show	= class_attr_show,
 	.store	= class_attr_store,
 };
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 58ec1069f4b0..b0d6646a2814 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -100,7 +100,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops dev_sysfs_ops = {
+static const struct sysfs_ops dev_sysfs_ops = {
 	.show	= dev_attr_show,
 	.store	= dev_attr_store,
 };
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 747c99e0568b..8980feec5d14 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -54,7 +54,7 @@ sysdev_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= sysdev_show,
 	.store	= sysdev_store,
 };
@@ -104,7 +104,7 @@ static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_class_ops = {
+static const struct sysfs_ops sysfs_class_ops = {
 	.show	= sysdev_class_show,
 	.store	= sysdev_class_store,
 };
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 73d815d3f1b2..39c8514442eb 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -284,7 +284,7 @@ static ssize_t kobj_pkt_store(struct kobject *kobj,
 	return len;
 }
 
-static struct sysfs_ops kobj_pkt_ops = {
+static const struct sysfs_ops kobj_pkt_ops = {
 	.show = kobj_pkt_show,
 	.store = kobj_pkt_store
 };
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 67bc2ece7b4b..2d5d575e889d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -766,7 +766,7 @@ static void cpufreq_sysfs_release(struct kobject *kobj)
 	complete(&policy->kobj_unregister);
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= show,
 	.store	= store,
 };
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index c9cefacabf37..8719b36e1a4d 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -195,7 +195,7 @@ static ssize_t cpuidle_store(struct kobject * kobj, struct attribute * attr,
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_sysfs_ops = {
+static const struct sysfs_ops cpuidle_sysfs_ops = {
 	.show = cpuidle_show,
 	.store = cpuidle_store,
 };
@@ -281,7 +281,7 @@ static ssize_t cpuidle_state_show(struct kobject * kobj,
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_state_sysfs_ops = {
+static const struct sysfs_ops cpuidle_state_sysfs_ops = {
 	.show = cpuidle_state_show,
 };
 
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index af14c9a5b8d4..0099340b9616 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -1138,7 +1138,7 @@ ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 	return entry->show(&chan->common, page);
 }
 
-struct sysfs_ops ioat_sysfs_ops = {
+const struct sysfs_ops ioat_sysfs_ops = {
 	.show	= ioat_attr_show,
 };
 
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 4f747a254074..86b97ac8774e 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -346,7 +346,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
 			   unsigned long *phys_complete);
 void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
 void ioat_kobject_del(struct ioatdma_device *device);
-extern struct sysfs_ops ioat_sysfs_ops;
+extern const struct sysfs_ops ioat_sysfs_ops;
 extern struct ioat_sysfs_entry ioat_version_attr;
 extern struct ioat_sysfs_entry ioat_cap_attr;
 #endif /* IOATDMA_H */
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 53764577035f..5fdedbc0f545 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -137,7 +137,7 @@ static ssize_t edac_dev_ctl_info_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for an 'ctl_info' */
-static struct sysfs_ops device_ctl_info_ops = {
+static const struct sysfs_ops device_ctl_info_ops = {
 	.show = edac_dev_ctl_info_show,
 	.store = edac_dev_ctl_info_store
 };
@@ -373,7 +373,7 @@ static ssize_t edac_dev_instance_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for an 'instance' */
-static struct sysfs_ops device_instance_ops = {
+static const struct sysfs_ops device_instance_ops = {
 	.show = edac_dev_instance_show,
 	.store = edac_dev_instance_store
 };
@@ -476,7 +476,7 @@ static ssize_t edac_dev_block_store(struct kobject *kobj,
 }
 
 /* edac_dev file operations for a 'block' */
-static struct sysfs_ops device_block_ops = {
+static const struct sysfs_ops device_block_ops = {
 	.show = edac_dev_block_show,
 	.store = edac_dev_block_store
 };
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index e1d4ce083481..88840e9fa3e0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -245,7 +245,7 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr,
 	return -EIO;
 }
 
-static struct sysfs_ops csrowfs_ops = {
+static const struct sysfs_ops csrowfs_ops = {
 	.show = csrowdev_show,
 	.store = csrowdev_store
 };
@@ -575,7 +575,7 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr,
 }
 
 /* Intermediate show/store table */
-static struct sysfs_ops mci_ops = {
+static const struct sysfs_ops mci_ops = {
 	.show = mcidev_show,
 	.store = mcidev_store
 };
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index fb60a877d768..bef94e3d9944 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -121,7 +121,7 @@ static ssize_t edac_pci_instance_store(struct kobject *kobj,
 }
 
 /* fs_ops table */
-static struct sysfs_ops pci_instance_ops = {
+static const struct sysfs_ops pci_instance_ops = {
 	.show = edac_pci_instance_show,
 	.store = edac_pci_instance_store
 };
@@ -261,7 +261,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj,
 	return -EIO;
 }
 
-static struct sysfs_ops edac_pci_sysfs_ops = {
+static const struct sysfs_ops edac_pci_sysfs_ops = {
 	.show = edac_pci_dev_show,
 	.store = edac_pci_dev_store
 };
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 9e4f59dc7f1e..110e24e50883 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -122,7 +122,7 @@ edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
 	return ret;
 }
 
-static struct sysfs_ops edd_attr_ops = {
+static const struct sysfs_ops edd_attr_ops = {
 	.show = edd_attr_show,
 };
 
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index f4f709d1370b..082f06ecd327 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -362,7 +362,7 @@ static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops efivar_attr_ops = {
+static const struct sysfs_ops efivar_attr_ops = {
 	.show = efivar_attr_show,
 	.store = efivar_attr_store,
 };
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index a3600e3ed0fa..ed2801c378de 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -519,7 +519,7 @@ static ssize_t ibft_show_attribute(struct kobject *kobj,
 	return ret;
 }
 
-static struct sysfs_ops ibft_attr_ops = {
+static const struct sysfs_ops ibft_attr_ops = {
 	.show = ibft_show_attribute,
 };
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 20f645743ead..d59f7cad2269 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -74,7 +74,7 @@ static struct attribute *def_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops memmap_attr_ops = {
+static const struct sysfs_ops memmap_attr_ops = {
 	.show = memmap_attr_show,
 };
 
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c7320ce4567d..89c38c49066f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -128,7 +128,7 @@ static struct attribute *ttm_bo_global_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops ttm_bo_global_ops = {
+static const struct sysfs_ops ttm_bo_global_ops = {
 	.show = &ttm_bo_global_show
 };
 
diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c
index f5245c02b8fd..eb143e04d402 100644
--- a/drivers/gpu/drm/ttm/ttm_memory.c
+++ b/drivers/gpu/drm/ttm/ttm_memory.c
@@ -152,7 +152,7 @@ static struct attribute *ttm_mem_zone_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops ttm_mem_zone_ops = {
+static const struct sysfs_ops ttm_mem_zone_ops = {
 	.show = &ttm_mem_zone_show,
 	.store = &ttm_mem_zone_store
 };
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 5130fc55b8e2..764787ebe8d8 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3597,7 +3597,7 @@ static ssize_t cm_show_counter(struct kobject *obj, struct attribute *attr,
 		       atomic_long_read(&group->counter[cm_attr->index]));
 }
 
-static struct sysfs_ops cm_counter_ops = {
+static const struct sysfs_ops cm_counter_ops = {
 	.show = cm_show_counter
 };
 
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 158a214da2f7..1558bb7fc74d 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -79,7 +79,7 @@ static ssize_t port_attr_show(struct kobject *kobj,
 	return port_attr->show(p, port_attr, buf);
 }
 
-static struct sysfs_ops port_sysfs_ops = {
+static const struct sysfs_ops port_sysfs_ops = {
 	.show = port_attr_show
 };
 
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index f91b40942e07..84d2b91e4efb 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -75,7 +75,7 @@ static struct attribute *dm_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops dm_sysfs_ops = {
+static const struct sysfs_ops dm_sysfs_ops = {
 	.show	= dm_attr_show,
 };
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index a20a71e5efd3..fdc1890b6ac5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2642,7 +2642,7 @@ static void rdev_free(struct kobject *ko)
 	mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj);
 	kfree(rdev);
 }
-static struct sysfs_ops rdev_sysfs_ops = {
+static const struct sysfs_ops rdev_sysfs_ops = {
 	.show		= rdev_attr_show,
 	.store		= rdev_attr_store,
 };
@@ -4059,7 +4059,7 @@ static void md_free(struct kobject *ko)
 	kfree(mddev);
 }
 
-static struct sysfs_ops md_sysfs_ops = {
+static const struct sysfs_ops md_sysfs_ops = {
 	.show	= md_attr_show,
 	.store	= md_attr_store,
 };
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index f2b937966950..0bc777bac9b4 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1577,7 +1577,7 @@ static struct attribute * veth_pool_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops veth_pool_ops = {
+static const struct sysfs_ops veth_pool_ops = {
 	.show   = veth_pool_show,
 	.store  = veth_pool_store,
 };
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 966de5d69521..e6e972d9b7ca 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -384,7 +384,7 @@ static struct attribute *veth_cnx_default_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops veth_cnx_sysfs_ops = {
+static const struct sysfs_ops veth_cnx_sysfs_ops = {
 		.show = veth_cnx_attribute_show
 };
 
@@ -441,7 +441,7 @@ static struct attribute *veth_port_default_attrs[] = {
 	NULL
 };
 
-static struct sysfs_ops veth_port_sysfs_ops = {
+static const struct sysfs_ops veth_port_sysfs_ops = {
 	.show = veth_port_attribute_show
 };
 
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 0bc5d474b168..1062b8ffe244 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -481,7 +481,7 @@ pdcspath_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops pdcspath_attr_ops = {
+static const struct sysfs_ops pdcspath_attr_ops = {
 	.show = pdcspath_attr_show,
 	.store = pdcspath_attr_store,
 };
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 6151389fd903..0a894efd4b9b 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj)
 }
 
 static struct kobj_type legacy_ktype = {
-	.sysfs_ops = &(struct sysfs_ops){
+	.sysfs_ops = &(const struct sysfs_ops){
 		.store = legacy_store, .show = legacy_show
 	},
 	.release = &legacy_release,
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 49c9e6c9779a..f75a44d37fbe 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj,
 	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
 }
 
-static struct sysfs_ops pci_slot_sysfs_ops = {
+static const struct sysfs_ops pci_slot_sysfs_ops = {
 	.show = pci_slot_attr_show,
 	.store = pci_slot_attr_store,
 };
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e941367dd28f..4de382acd8f2 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(mem, buf);
 }
 
-static struct sysfs_ops map_sysfs_ops = {
+static const struct sysfs_ops map_sysfs_ops = {
 	.show = map_type_show,
 };
 
@@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(port, buf);
 }
 
-static struct sysfs_ops portio_sysfs_ops = {
+static const struct sysfs_ops portio_sysfs_ops = {
 	.show = portio_type_show,
 };
 
diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c
index 0370399ff4bb..6627c94cc854 100644
--- a/drivers/uwb/wlp/sysfs.c
+++ b/drivers/uwb/wlp/sysfs.c
@@ -615,8 +615,7 @@ ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static
-struct sysfs_ops wss_sysfs_ops = {
+static const struct sysfs_ops wss_sysfs_ops = {
 	.show	= wlp_wss_attr_show,
 	.store	= wlp_wss_attr_store,
 };
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 913142d4cab1..9acef00c47ea 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -341,7 +341,7 @@ static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
 	return manager_attr->store(manager, buf, size);
 }
 
-static struct sysfs_ops manager_sysfs_ops = {
+static const struct sysfs_ops manager_sysfs_ops = {
 	.show = manager_attr_show,
 	.store = manager_attr_store,
 };
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0c5bea263ac6..aed3f3194347 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -320,7 +320,7 @@ static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
 	return overlay_attr->store(overlay, buf, size);
 }
 
-static struct sysfs_ops overlay_sysfs_ops = {
+static const struct sysfs_ops overlay_sysfs_ops = {
 	.show = overlay_attr_show,
 	.store = overlay_attr_store,
 };
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index ae5cb05a1a1c..bb71ab2336c8 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -426,7 +426,7 @@ static ssize_t hyp_sysfs_store(struct kobject *kobj,
 	return 0;
 }
 
-static struct sysfs_ops hyp_sysfs_ops = {
+static const struct sysfs_ops hyp_sysfs_ops = {
 	.show = hyp_sysfs_show,
 	.store = hyp_sysfs_store,
 };
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index a240b6fa81df..4ce16ef702a3 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -164,12 +164,12 @@ static void btrfs_root_release(struct kobject *kobj)
 	complete(&root->kobj_unregister);
 }
 
-static struct sysfs_ops btrfs_super_attr_ops = {
+static const struct sysfs_ops btrfs_super_attr_ops = {
 	.show	= btrfs_super_attr_show,
 	.store	= btrfs_super_attr_store,
 };
 
-static struct sysfs_ops btrfs_root_attr_ops = {
+static const struct sysfs_ops btrfs_root_attr_ops = {
 	.show	= btrfs_root_attr_show,
 	.store	= btrfs_root_attr_store,
 };
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index 26a8bd40400a..f994a7dfda85 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -148,7 +148,7 @@ static void lockspace_kobj_release(struct kobject *k)
 	kfree(ls);
 }
 
-static struct sysfs_ops dlm_attr_ops = {
+static const struct sysfs_ops dlm_attr_ops = {
 	.show  = dlm_attr_show,
 	.store = dlm_attr_store,
 };
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 2b83b96cb2eb..ce84a6ed4a48 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2358,7 +2358,7 @@ static void ext4_sb_release(struct kobject *kobj)
 }
 
 
-static struct sysfs_ops ext4_attr_ops = {
+static const struct sysfs_ops ext4_attr_ops = {
 	.show	= ext4_attr_show,
 	.store	= ext4_attr_store,
 };
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 543503010ed0..419042f7f0b6 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -49,7 +49,7 @@ static ssize_t gfs2_attr_store(struct kobject *kobj, struct attribute *attr,
 	return a->store ? a->store(sdp, buf, len) : len;
 }
 
-static struct sysfs_ops gfs2_attr_ops = {
+static const struct sysfs_ops gfs2_attr_ops = {
 	.show  = gfs2_attr_show,
 	.store = gfs2_attr_store,
 };
diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c
index b39da877b12f..3bb928a2bf7d 100644
--- a/fs/ocfs2/cluster/masklog.c
+++ b/fs/ocfs2/cluster/masklog.c
@@ -136,7 +136,7 @@ static ssize_t mlog_store(struct kobject *obj, struct attribute *attr,
 	return mlog_mask_store(mlog_attr->mask, buf, count);
 }
 
-static struct sysfs_ops mlog_attr_ops = {
+static const struct sysfs_ops mlog_attr_ops = {
 	.show  = mlog_show,
 	.store = mlog_store,
 };
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 50b725bcc3f3..ced2299f1c9a 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -53,7 +53,7 @@ struct sysfs_buffer {
 	size_t			count;
 	loff_t			pos;
 	char			* page;
-	struct sysfs_ops	* ops;
+	const struct sysfs_ops	* ops;
 	struct mutex		mutex;
 	int			needs_read_fill;
 	int			event;
@@ -75,7 +75,7 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer
 {
 	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_ops * ops = buffer->ops;
+	const struct sysfs_ops * ops = buffer->ops;
 	int ret = 0;
 	ssize_t count;
 
@@ -199,7 +199,7 @@ flush_write_buffer(struct dentry * dentry, struct sysfs_buffer * buffer, size_t
 {
 	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_ops * ops = buffer->ops;
+	const struct sysfs_ops * ops = buffer->ops;
 	int rc;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
@@ -335,7 +335,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
 	struct sysfs_buffer *buffer;
-	struct sysfs_ops *ops;
+	const struct sysfs_ops *ops;
 	int error = -EACCES;
 	char *p;
 
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 57a1eaae9096..3950d3c2850d 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -106,7 +106,7 @@ extern char *kobject_get_path(struct kobject *kobj, gfp_t flag);
 
 struct kobj_type {
 	void (*release)(struct kobject *kobj);
-	struct sysfs_ops *sysfs_ops;
+	const struct sysfs_ops *sysfs_ops;
 	struct attribute **default_attrs;
 };
 
@@ -132,7 +132,7 @@ struct kobj_attribute {
 			 const char *buf, size_t count);
 };
 
-extern struct sysfs_ops kobj_sysfs_ops;
+extern const struct sysfs_ops kobj_sysfs_ops;
 
 /**
  * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem.
diff --git a/kernel/params.c b/kernel/params.c
index 48370be3c0a1..68396d73c838 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -722,7 +722,7 @@ static ssize_t module_attr_store(struct kobject *kobj,
 	return ret;
 }
 
-static struct sysfs_ops module_sysfs_ops = {
+static const struct sysfs_ops module_sysfs_ops = {
 	.show = module_attr_show,
 	.store = module_attr_store,
 };
diff --git a/lib/kobject.c b/lib/kobject.c
index cecf5a0ef6e1..8115eb1bbf4d 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -700,7 +700,7 @@ static ssize_t kobj_attr_store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-struct sysfs_ops kobj_sysfs_ops = {
+const struct sysfs_ops kobj_sysfs_ops = {
 	.show	= kobj_attr_show,
 	.store	= kobj_attr_store,
 };
diff --git a/mm/slub.c b/mm/slub.c
index a26753c12dcd..a2b8969ba6d0 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -4390,7 +4390,7 @@ static void kmem_cache_release(struct kobject *kobj)
 	kfree(s);
 }
 
-static struct sysfs_ops slab_sysfs_ops = {
+static const struct sysfs_ops slab_sysfs_ops = {
 	.show = slab_attr_show,
 	.store = slab_attr_store,
 };
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 1cf2cef78584..fef0384e3c0b 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -423,7 +423,7 @@ extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
 
 #ifdef CONFIG_SYSFS
 /* br_sysfs_if.c */
-extern struct sysfs_ops brport_sysfs_ops;
+extern const struct sysfs_ops brport_sysfs_ops;
 extern int br_sysfs_addif(struct net_bridge_port *p);
 
 /* br_sysfs_br.c */
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index 696596cd3384..0b9916489d6b 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -238,7 +238,7 @@ static ssize_t brport_store(struct kobject * kobj,
 	return ret;
 }
 
-struct sysfs_ops brport_sysfs_ops = {
+const struct sysfs_ops brport_sysfs_ops = {
 	.show = brport_show,
 	.store = brport_store,
 };
diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c
index 7c6088140528..3b126d1f8599 100644
--- a/samples/kobject/kset-example.c
+++ b/samples/kobject/kset-example.c
@@ -87,7 +87,7 @@ static ssize_t foo_attr_store(struct kobject *kobj,
 }
 
 /* Our custom sysfs_ops that we will associate with our ktype later on */
-static struct sysfs_ops foo_sysfs_ops = {
+static const struct sysfs_ops foo_sysfs_ops = {
 	.show = foo_attr_show,
 	.store = foo_attr_store,
 };
-- 
cgit v1.2.3


From 500ca9ba241304937c54c379e515b24400379353 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Sun, 7 Mar 2010 14:21:27 +0000
Subject: be2net: remove usage of be_pci_func

When PCI functions are virtuialized in applications by assigning PCI
functions to VM (PCI passthrough), the be2net driver in the VM sees a

different function number. So, use of PCI function number in any
calculation will break existing code. This patch takes care of it.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      | 5 -----
 drivers/net/benet/be_cmds.c | 6 ------
 drivers/net/benet/be_main.c | 2 +-
 3 files changed, 1 insertion(+), 12 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index be81fb2d10f7..8f0752553681 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -290,11 +290,6 @@ extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
 
-static inline unsigned int be_pci_func(struct be_adapter *adapter)
-{
-	return PCI_FUNC(adapter->pdev->devfn);
-}
-
 #define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
 
 #define PAGE_SHIFT_4K		12
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 4b1f80519ca4..c59215361f4e 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -465,8 +465,6 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 
 	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
 
-	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
 	/* 4byte eqe*/
 	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
@@ -629,7 +627,6 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
 	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, be_pci_func(adapter));
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -678,7 +675,6 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 
 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
 
-	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
 		be_encoded_q_len(mccq->len));
@@ -727,8 +723,6 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 
 	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt,
 		be_encoded_q_len(txq->len));
-	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
 
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 22f787f2a30b..7c9b57eb780e 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1382,7 +1382,7 @@ rx_eq_free:
 /* There are 8 evt ids per func. Retruns the evt id's bit number */
 static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
 {
-	return eq_id - 8 * be_pci_func(adapter);
+	return eq_id % 8;
 }
 
 static irqreturn_t be_intx(int irq, void *dev)
-- 
cgit v1.2.3


From 7e8a9298adf7531c58d73ba9c499353e3807cf19 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Sun, 7 Mar 2010 14:23:44 +0000
Subject: be2net: remove unused code in be_load_fw

This patch cleans up some unused code from be_load_fw().

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be_main.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 7c9b57eb780e..43e8032f9236 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1993,16 +1993,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	struct be_dma_mem flash_cmd;
 	int status, i = 0;
 	const u8 *p;
-	char fw_ver[FW_VER_LEN];
-	char fw_cfg;
 
-	status = be_cmd_get_fw_ver(adapter, fw_ver);
-	if (status)
-		return status;
-
-	fw_cfg = *(fw_ver + 2);
-	if (fw_cfg == '0')
-		fw_cfg = '1';
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
-- 
cgit v1.2.3


From 8bae5698616ac336938684ce7a7370299bd55d01 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Mon, 8 Mar 2010 00:14:45 +0000
Subject: qlcnic: fix tx csum status

Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show
correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account
to show tx csum status, which driver doesn't set while disabling tx csum.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_ethtool.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 8da6ec8c13b9..ef12792a88be 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -785,6 +785,11 @@ qlcnic_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
+static u32 qlcnic_get_tx_csum(struct net_device *dev)
+{
+	return dev->features & NETIF_F_IP_CSUM;
+}
+
 static u32 qlcnic_get_rx_csum(struct net_device *dev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
@@ -995,6 +1000,7 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 	.set_ringparam = qlcnic_set_ringparam,
 	.get_pauseparam = qlcnic_get_pauseparam,
 	.set_pauseparam = qlcnic_set_pauseparam,
+	.get_tx_csum = qlcnic_get_tx_csum,
 	.set_tx_csum = ethtool_op_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = qlcnic_get_tso,
-- 
cgit v1.2.3


From 8bfe8b91b8b877066c8ac788f59a40324eaac6d8 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Mon, 8 Mar 2010 00:14:46 +0000
Subject: qlcnic: additional driver statistics.

Statistics added for lro/lso bytes, count for tx stop queue and
wake queue and skb alloc failure count.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h         |  5 +++++
 drivers/net/qlcnic/qlcnic_ethtool.c | 11 +++++++++++
 drivers/net/qlcnic/qlcnic_hw.c      |  1 +
 drivers/net/qlcnic/qlcnic_init.c    |  8 ++++++--
 drivers/net/qlcnic/qlcnic_main.c    |  5 +++++
 5 files changed, 28 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index b40a851ec7d1..9897b699752f 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -423,6 +423,11 @@ struct qlcnic_adapter_stats {
 	u64  lro_pkts;
 	u64  rxbytes;
 	u64  txbytes;
+	u64  lrobytes;
+	u64  lso_frames;
+	u64  xmit_on;
+	u64  xmit_off;
+	u64  skb_alloc_failure;
 };
 
 /*
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index ef12792a88be..f83e15fe3e1b 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -59,6 +59,17 @@ static const struct qlcnic_stats qlcnic_gstrings_stats[] = {
 		QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)},
 	{"tx_bytes",
 		QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)},
+	{"lrobytes",
+		QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)},
+	{"lso_frames",
+		QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)},
+	{"xmit_on",
+		QLC_SIZEOF(stats.xmit_on), QLC_OFF(stats.xmit_on)},
+	{"xmit_off",
+		QLC_SIZEOF(stats.xmit_off), QLC_OFF(stats.xmit_off)},
+	{"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure),
+		QLC_OFF(stats.skb_alloc_failure)},
+
 };
 
 #define QLCNIC_STATS_LEN	ARRAY_SIZE(qlcnic_gstrings_stats)
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 99a4d1379d00..e95646bf7d56 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -349,6 +349,7 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
 	if (nr_desc >= qlcnic_tx_avail(tx_ring)) {
 		netif_tx_stop_queue(tx_ring->txq);
 		__netif_tx_unlock_bh(tx_ring->txq);
+		adapter->stats.xmit_off++;
 		return -EBUSY;
 	}
 
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index ea00ab4d4feb..f0df9717aece 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -1114,8 +1114,10 @@ qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter,
 	struct pci_dev *pdev = adapter->pdev;
 
 	buffer->skb = dev_alloc_skb(rds_ring->skb_size);
-	if (!buffer->skb)
+	if (!buffer->skb) {
+		adapter->stats.skb_alloc_failure++;
 		return -ENOMEM;
+	}
 
 	skb = buffer->skb;
 
@@ -1289,7 +1291,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 	netif_receive_skb(skb);
 
 	adapter->stats.lro_pkts++;
-	adapter->stats.rxbytes += length;
+	adapter->stats.lrobytes += length;
 
 	return buffer;
 }
@@ -1505,6 +1507,8 @@ qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter,
 		adapter->diag_cnt++;
 
 	dev_kfree_skb_any(skb);
+	adapter->stats.rx_pkts++;
+	adapter->stats.rxbytes += length;
 
 	return buffer;
 }
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 665e8e56b6a8..fc721564e69e 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -118,6 +118,7 @@ qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
 	if (qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH) {
 		netif_stop_queue(adapter->netdev);
 		smp_mb();
+		adapter->stats.xmit_off++;
 	}
 }
 
@@ -1385,6 +1386,7 @@ qlcnic_tso_check(struct net_device *netdev,
 	int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
 	struct cmd_desc_type0 *hwdesc;
 	struct vlan_ethhdr *vh;
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (protocol == cpu_to_be16(ETH_P_8021Q)) {
 
@@ -1494,6 +1496,7 @@ qlcnic_tso_check(struct net_device *netdev,
 
 	tx_ring->producer = producer;
 	barrier();
+	adapter->stats.lso_frames++;
 }
 
 static int
@@ -1573,6 +1576,7 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (unlikely(no_of_desc + 2 > qlcnic_tx_avail(tx_ring))) {
 		netif_stop_queue(netdev);
+		adapter->stats.xmit_off++;
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1880,6 +1884,7 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter)
 			if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH) {
 				netif_wake_queue(netdev);
 				adapter->tx_timeo_cnt = 0;
+				adapter->stats.xmit_on++;
 			}
 			__netif_tx_unlock(tx_ring->txq);
 		}
-- 
cgit v1.2.3


From 9ab17b3968f9521bb4fffd8767953d2b0148aad0 Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Date: Mon, 8 Mar 2010 00:14:47 +0000
Subject: qlcnic: fix multicast handling

For promiscuous mode, driver send request to device for deleting
multicast addresses and again it send request for adding them back
while exiting from this mode, this is bad for performance.
Just setting device in promiscuous mode is enough, no need to del/add
multicast addresses.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_hw.c | 31 ++++++-------------------------
 1 file changed, 6 insertions(+), 25 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index e95646bf7d56..da00e162b6d3 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -398,20 +398,16 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
-static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter,
-		u8 *addr, struct list_head *del_list)
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
 {
 	struct list_head *head;
 	struct qlcnic_mac_list_s *cur;
 
 	/* look up if already exists */
-	list_for_each(head, del_list) {
+	list_for_each(head, &adapter->mac_list) {
 		cur = list_entry(head, struct qlcnic_mac_list_s, list);
-
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
-			list_move_tail(head, &adapter->mac_list);
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
 			return 0;
-		}
 	}
 
 	cur = kzalloc(sizeof(struct qlcnic_mac_list_s), GFP_ATOMIC);
@@ -433,14 +429,9 @@ void qlcnic_set_multi(struct net_device *netdev)
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u32 mode = VPORT_MISS_MODE_DROP;
-	LIST_HEAD(del_list);
-	struct list_head *head;
-	struct qlcnic_mac_list_s *cur;
 
-	list_splice_tail_init(&adapter->mac_list, &del_list);
-
-	qlcnic_nic_add_mac(adapter, adapter->mac_addr, &del_list);
-	qlcnic_nic_add_mac(adapter, bcast_addr, &del_list);
+	qlcnic_nic_add_mac(adapter, adapter->mac_addr);
+	qlcnic_nic_add_mac(adapter, bcast_addr);
 
 	if (netdev->flags & IFF_PROMISC) {
 		mode = VPORT_MISS_MODE_ACCEPT_ALL;
@@ -455,22 +446,12 @@ void qlcnic_set_multi(struct net_device *netdev)
 
 	if (!netdev_mc_empty(netdev)) {
 		netdev_for_each_mc_addr(mc_ptr, netdev) {
-			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
-							&del_list);
+			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr);
 		}
 	}
 
 send_fw_cmd:
 	qlcnic_nic_set_promisc(adapter, mode);
-	head = &del_list;
-	while (!list_empty(head)) {
-		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
-
-		qlcnic_sre_macaddr_change(adapter,
-				cur->mac_addr, QLCNIC_MAC_DEL);
-		list_del(&cur->list);
-		kfree(cur);
-	}
 }
 
 int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
-- 
cgit v1.2.3


From b7eff1007fea3d153a9a5c0f872304ec19412bbb Mon Sep 17 00:00:00 2001
From: Sucheta Chakraborty <sucheta@dut6195.unminc.com>
Date: Mon, 8 Mar 2010 00:14:48 +0000
Subject: qlcnic: validate unified fw image

Validate all sections of unified fw image, before accessing them,
to avoid seg fault.

Signed-off-by: Sucheta Chakraborty <sucheta@dut6195.unminc.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_init.c | 146 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 139 insertions(+), 7 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index f0df9717aece..21a6e9f3dac5 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -568,21 +568,123 @@ struct uni_table_desc *qlcnic_get_table_desc(const u8 *unirom, int section)
 	return NULL;
 }
 
+#define FILEHEADER_SIZE (14 * 4)
+
 static int
-qlcnic_set_product_offs(struct qlcnic_adapter *adapter)
+qlcnic_validate_header(struct qlcnic_adapter *adapter)
 {
-	struct uni_table_desc *ptab_descr;
 	const u8 *unirom = adapter->fw->data;
-	u32 i;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 fw_file_size = adapter->fw->size;
 	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+
+	if (fw_file_size < FILEHEADER_SIZE)
+		return -EINVAL;
+
+	entries = cpu_to_le32(directory->num_entries);
+	entry_size = cpu_to_le32(directory->entry_size);
+	tab_size = cpu_to_le32(directory->findex) + (entries * entry_size);
+
+	if (fw_file_size < tab_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_bootld(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_BOOTLD_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_BOOTLD);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_fw(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_FIRMWARE_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_FW);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_product_offs(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *ptab_descr;
+	const u8 *unirom = adapter->fw->data;
 	int mn_present = qlcnic_has_mn(adapter);
+	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+	u32 i;
 
 	ptab_descr = qlcnic_get_table_desc(unirom,
 				QLCNIC_UNI_DIR_SECT_PRODUCT_TBL);
-	if (ptab_descr == NULL)
-		return -1;
+	if (!ptab_descr)
+		return -EINVAL;
 
 	entries = cpu_to_le32(ptab_descr->num_entries);
+	entry_size = cpu_to_le32(ptab_descr->entry_size);
+	tab_size = cpu_to_le32(ptab_descr->findex) + (entries * entry_size);
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
 nomn:
 	for (i = 0; i < entries; i++) {
 
@@ -609,7 +711,37 @@ nomn:
 		mn_present = 0;
 		goto nomn;
 	}
-	return -1;
+	return -EINVAL;
+}
+
+static int
+qlcnic_validate_unified_romimage(struct qlcnic_adapter *adapter)
+{
+	if (qlcnic_validate_header(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: header validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_product_offs(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: product validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_bootld(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: bootld validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_fw(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: firmware validation failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 static
@@ -858,7 +990,7 @@ qlcnic_validate_firmware(struct qlcnic_adapter *adapter)
 	u8 fw_type = adapter->fw_type;
 
 	if (fw_type == QLCNIC_UNIFIED_ROMIMAGE) {
-		if (qlcnic_set_product_offs(adapter))
+		if (qlcnic_validate_unified_romimage(adapter))
 			return -EINVAL;
 
 		min_size = QLCNIC_UNI_FW_MIN_SIZE;
-- 
cgit v1.2.3


From addd5abf49be31787aeb6203d266e0bd31a3fadd Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 8 Mar 2010 00:14:49 +0000
Subject: qlcnic: fix bios version check

Bios sub version from unified fw image is calculated incorrect.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index 21a6e9f3dac5..7c34e4e29b3f 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -847,7 +847,7 @@ qlcnic_get_bios_version(struct qlcnic_adapter *adapter)
 	bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
 				+ QLCNIC_UNI_BIOS_VERSION_OFF));
 
-	return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
+	return (bios_ver << 16) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
 }
 
 int
-- 
cgit v1.2.3


From 1515faf2f995add976d4428bbc1583a4a0c81e5f Mon Sep 17 00:00:00 2001
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 8 Mar 2010 00:14:50 +0000
Subject: qlcnic: remove extra space from board names

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 9897b699752f..0da94b208db1 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -1100,11 +1100,11 @@ struct qlcnic_brdinfo {
 
 static const struct qlcnic_brdinfo qlcnic_boards[] = {
 	{0x1077, 0x8020, 0x1077, 0x203,
-		"8200 Series Single Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Single Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x207,
-		"8200 Series Dual Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Dual Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x20b,
 		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x1077, 0x20c,
-- 
cgit v1.2.3


From e9dcd1613f0ac0b3573b7d813a2c5672cd8302eb Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Mon, 8 Mar 2010 12:13:57 -0800
Subject: can: fix bfin_can build error after alloc_candev() change

Looks like commit a6e4bc530403 didn't include updates to drivers so the
Blackfin CAN driver fails to build now.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/can/bfin_can.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index bf7f9ba2d903..866905fa4119 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -26,6 +26,7 @@
 
 #define DRV_NAME "bfin_can"
 #define BFIN_CAN_TIMEOUT 100
+#define TX_ECHO_SKB_MAX  1
 
 /*
  * transmit and receive channels
@@ -593,7 +594,7 @@ struct net_device *alloc_bfin_candev(void)
 	struct net_device *dev;
 	struct bfin_can_priv *priv;
 
-	dev = alloc_candev(sizeof(*priv));
+	dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 
-- 
cgit v1.2.3


From 1d79e53c56afe0826a311c3bc1653ad938166c22 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 26 Feb 2010 11:01:36 -0800
Subject: iwl3945: fix memory corruption

Recent patch "iwlwifi: move 3945 clip groups to 3945 data" exposed a memory
corruption problem. When initializing the clip groups the code was
mistakenly using the iwlagn rate count, not the 3945 rate count. This
resulted in more memory being written than was allocated.

"iwlwifi: move 3945 clip groups to 3945 data" moved the location where the
clip groups are stored and the impact is now severe in that the number of
configured TX queues is modified. Previously the
"temperature" field was overwritten, which did not seem to affect the
operation.

Fix this one instance where wrong rate count was used. I also noticed one
more location where the iwlagn rate count was used to index an iwl3945
array, fix this. I also modified one location that modified the iwlagn rate
count to obtain the iwl3945 rate count ... just use the iwl3945 rate count
directly.

This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2165 and
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2168

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 303cc8193adc..e0678d921055 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -184,7 +184,7 @@ static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 {
 	int idx;
 
-	for (idx = 0; idx < IWL_RATE_COUNT; idx++)
+	for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
 		if (iwl3945_rates[idx].plcp == plcp)
 			return idx;
 	return -1;
@@ -805,7 +805,7 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
 				  int sta_id, int tx_id)
 {
 	u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
-	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
+	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
 	u16 rate_mask;
 	int rate;
 	u8 rts_retry_limit;
@@ -2146,7 +2146,7 @@ static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
 
 		/* fill in channel group's nominal powers for each rate */
 		for (rate_index = 0;
-		     rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
+		     rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
 			switch (rate_index) {
 			case IWL_RATE_36M_INDEX_TABLE:
 				if (i == 0)	/* B/G */
-- 
cgit v1.2.3


From 1382c71c764540880d35485b033a44ce104d8e2e Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Thu, 25 Feb 2010 10:02:19 -0800
Subject: Revert "iwlwifi: Send broadcast probe request only when asked to"

This reverts commit 21b2d8bd2f0d4e0f21ade147fd193c8b9c1fd2b9.

As explained by Johannes:
When we
build a probe request frame in the buffer with the SSID, we could
arrive over the limit of 200 bytes. When we build it in the buffer
without the SSID (wildcard) we don't arrive over 200 bytes, but the
ucode still allows direct probe in addition because it has an internal
buffer that is larger when it inserts the SSID...

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c  |  2 +-
 drivers/net/wireless/iwlwifi/iwl-scan.c | 49 +++++++++++----------------------
 2 files changed, 17 insertions(+), 34 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 47b021477967..818367b57bab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2653,7 +2653,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
 	 */
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd9ff2ed645a..bd2f7c420563 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -638,20 +638,9 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 	if (left < 0)
 		return 0;
 	*pos++ = WLAN_EID_SSID;
-	if (!priv->is_internal_short_scan &&
-	    priv->scan_request->n_ssids) {
-		struct cfg80211_ssid *ssid =
-			priv->scan_request->ssids;
-
-		/* Broadcast if ssid_len is 0 */
-		*pos++ = ssid->ssid_len;
-		memcpy(pos, ssid->ssid, ssid->ssid_len);
-		pos += ssid->ssid_len;
-		len += 2 + ssid->ssid_len;
-	} else {
-		*pos++ = 0;
-		len += 2;
-	}
+	*pos++ = 0;
+
+	len += 2;
 
 	if (WARN_ON(left < ie_len))
 		return len;
@@ -780,26 +769,20 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	if (priv->is_internal_short_scan) {
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
 	} else if (priv->scan_request->n_ssids) {
+		int i, p = 0;
 		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-		/*
-		 * The first SSID to scan is stuffed into the probe request
-		 * template and the remaining ones are handled through the
-		 * direct_scan array.
-		 */
-		if (priv->scan_request->n_ssids > 1) {
-			int i, p = 0;
-			for (i = 1; i < priv->scan_request->n_ssids; i++) {
-				if (!priv->scan_request->ssids[i].ssid_len)
-					continue;
-				scan->direct_scan[p].id = WLAN_EID_SSID;
-				scan->direct_scan[p].len =
-					priv->scan_request->ssids[i].ssid_len;
-				memcpy(scan->direct_scan[p].ssid,
-				       priv->scan_request->ssids[i].ssid,
-				       priv->scan_request->ssids[i].ssid_len);
-				n_probes++;
-				p++;
-			}
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
 		}
 		is_active = true;
 	} else
-- 
cgit v1.2.3


From fe234f0e5cbb880792d2d1ac0743cf8c07e9dde3 Mon Sep 17 00:00:00 2001
From: Louis Rilling <Louis.Rilling@kerlabs.com>
Date: Tue, 9 Mar 2010 06:14:41 +0000
Subject: tg3: Fix tg3_poll_controller() passing wrong pointer to
 tg3_interrupt()

Commit 09943a1819a240ff4a72f924d0038818fcdd0a90
	Author: Matt Carlson <mcarlson@broadcom.com>
	Date:   Fri Aug 28 14:01:57 2009 +0000

	tg3: Convert ISR parameter to tnapi

forgot to update tg3_poll_controller(), leading to intermittent crashes with
netpoll.

Fix this.

Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0fa7688ab483..c3b4fe74cd6b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5279,7 +5279,7 @@ static void tg3_poll_controller(struct net_device *dev)
 	struct tg3 *tp = netdev_priv(dev);
 
 	for (i = 0; i < tp->irq_cnt; i++)
-		tg3_interrupt(tp->napi[i].irq_vec, dev);
+		tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]);
 }
 #endif
 
-- 
cgit v1.2.3


From 7f29a3baa825725d29db399663790d15c78cddcf Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Tue, 9 Mar 2010 12:24:38 +0000
Subject: asix: fix setting mac address for AX88772

Setting new MAC address only worked when device was set to promiscuous mode.
Fix MAC address by writing new address to device using undocumented command
AX_CMD_READ_NODE_ID+1. Patch is tested with AX88772 device.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/asix.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 20e34608fa4a..9e05639435f2 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -54,6 +54,7 @@ static const char driver_name [] = "asix";
 #define AX_CMD_WRITE_IPG0		0x12
 #define AX_CMD_WRITE_IPG1		0x13
 #define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
 #define AX_CMD_WRITE_IPG2		0x14
 #define AX_CMD_WRITE_MULTI_FILTER	0x16
 #define AX88172_CMD_READ_NODE_ID	0x17
@@ -165,6 +166,7 @@ static const char driver_name [] = "asix";
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
 	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
 	u8 phymode;
 	u8 ledmode;
 	u8 eeprom_len;
@@ -732,6 +734,30 @@ static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
+static int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
+
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
@@ -919,7 +945,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_change_mtu		= usbnet_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= asix_ioctl,
 	.ndo_set_multicast_list = asix_set_multicast,
@@ -1213,7 +1239,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list = asix_set_multicast,
 	.ndo_do_ioctl 		= asix_ioctl,
-- 
cgit v1.2.3


From 717ea4b3474852057b1ce2c639ce219f4f8d3a8d Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 10 Mar 2010 07:37:06 -0800
Subject: net: add ColdFire support to the smc91x driver

Some embedded ColdFire based boards use the SMC 91x family of ethernet
devices. (For example the Freescale M5249C3 and MoretonBay NETtel).

Add IO access support to the SMC91x driver, and allow this driver to
be configured for ColdFire platforms.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig  |  2 +-
 drivers/net/smc91x.h | 28 ++++++++++++++++++++++++++++
 2 files changed, 29 insertions(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7029cd50c458..0ba5b8e50a7c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -907,7 +907,7 @@ config SMC91X
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index a6ee883d1b0e..8d2772cc42f2 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -344,6 +344,34 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 
 #define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
 
+#elif defined(CONFIG_COLDFIRE)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+static inline void mcf_insw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		*wp++ = readw(a);
+}
+
+static inline void mcf_outsw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		writew(*wp++, a);
+}
+
+#define SMC_inw(a, r)		_swapw(readw((a) + (r)))
+#define SMC_outw(v, a, r)	writew(_swapw(v), (a) + (r))
+#define SMC_insw(a, r, p, l)	mcf_insw(a + r, p, l)
+#define SMC_outsw(a, r, p, l)	mcf_outsw(a + r, p, l)
+
+#define SMC_IRQ_FLAGS		(IRQF_DISABLED)
+
 #else
 
 /*
-- 
cgit v1.2.3


From e5a9a35cb9c0d92d7c986cb3696fb794be100087 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Fri, 5 Mar 2010 17:44:22 +0100
Subject: rt2x00: remove KSEG1ADDR define from rt2x00soc.h

Remove the KSEG1ADDR define from rt2x00soc.h as it redefines and covers the
correct one from the arch/mips/include/asm/addrspace.h. Otherwise the driver
oopses on the target platform (Ralink rt3050 board).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00soc.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
index 4739edfe2f00..474cbfc1efc7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.h
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -26,8 +26,6 @@
 #ifndef RT2X00SOC_H
 #define RT2X00SOC_H
 
-#define KSEG1ADDR(__ptr) __ptr
-
 /*
  * SoC driver handlers.
  */
-- 
cgit v1.2.3


From 8e59340e4fb65cfd748eaa1e23db057c52520f35 Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Mon, 8 Mar 2010 13:18:03 +0800
Subject: libipw: split ieee->networks into small pieces

The ieee->networks consists of 128 struct libipw_network entries. If
we allocate this chunk of memory altogether, it ends up with an
order 4 page allocation. High order page allocation is likely to fail
on system high load. This patch splits the big chunk memory allocation
into small pieces, each is 344 bytes, allocates them with 128 times.

The patch fixed bug http://bugzilla.kernel.org/show_bug.cgi?id=14989

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ipw2x00/libipw.h        |  2 +-
 drivers/net/wireless/ipw2x00/libipw_module.c | 37 +++++++++++++---------------
 2 files changed, 18 insertions(+), 21 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index bf45391172f3..a6d5e42647e4 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -797,7 +797,7 @@ struct libipw_device {
 	/* Probe / Beacon management */
 	struct list_head network_free_list;
 	struct list_head network_list;
-	struct libipw_network *networks;
+	struct libipw_network *networks[MAX_NETWORK_COUNT];
 	int scans;
 	int scan_age;
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 1ae0b2b02c38..2fa55867bd8b 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -67,16 +67,17 @@ void *libipw_wiphy_privid = &libipw_wiphy_privid;
 
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
-	if (ieee->networks)
-		return 0;
-
-	ieee->networks =
-	    kzalloc(MAX_NETWORK_COUNT * sizeof(struct libipw_network),
-		    GFP_KERNEL);
-	if (!ieee->networks) {
-		printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
-		       ieee->dev->name);
-		return -ENOMEM;
+	int i, j;
+
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		ieee->networks[i] = kzalloc(sizeof(struct libipw_network),
+					    GFP_KERNEL);
+		if (!ieee->networks[i]) {
+			LIBIPW_ERROR("Out of memory allocating beacons\n");
+			for (j = 0; j < i; j++)
+				kfree(ieee->networks[j]);
+			return -ENOMEM;
+		}
 	}
 
 	return 0;
@@ -97,15 +98,11 @@ static inline void libipw_networks_free(struct libipw_device *ieee)
 {
 	int i;
 
-	if (!ieee->networks)
-		return;
-
-	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		if (ieee->networks[i].ibss_dfs)
-			kfree(ieee->networks[i].ibss_dfs);
-
-	kfree(ieee->networks);
-	ieee->networks = NULL;
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		if (ieee->networks[i]->ibss_dfs)
+			kfree(ieee->networks[i]->ibss_dfs);
+		kfree(ieee->networks[i]);
+	}
 }
 
 void libipw_networks_age(struct libipw_device *ieee,
@@ -130,7 +127,7 @@ static void libipw_networks_initialize(struct libipw_device *ieee)
 	INIT_LIST_HEAD(&ieee->network_free_list);
 	INIT_LIST_HEAD(&ieee->network_list);
 	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		list_add_tail(&ieee->networks[i].list,
+		list_add_tail(&ieee->networks[i]->list,
 			      &ieee->network_free_list);
 }
 
-- 
cgit v1.2.3


From 8bd8beab49fec3f7d014c328641bd94de3df744b Mon Sep 17 00:00:00 2001
From: Bruno Randolf <br1@einfach.org>
Date: Tue, 9 Mar 2010 16:55:23 +0900
Subject: ath5k: use fixed antenna for tx descriptors

when using a fixed antenna we should use the antenna number in all tx
descriptors, otherwise the hardware will sometimes send the frame out on the
other antenna. it seems like the hardware does not always respect the default
antenna and diversity settings (esp.  AR5K_STA_ID1_DEFAULT_ANTENNA).

also i would like to note that antenna diversity does not always work correctly
on 5414 (at least) when only one antenna is connected: for example all frames
might be received on antenna A but still the HW tries to send on antenna B some
times, causing packet loss.

this is both verified with the antenna statistics output of the previous patch
and a spectrum analyzer.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 72474c0ccaff..ffe253ab9be7 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1873,7 +1873,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 		break;
 	case AR5K_ANTMODE_FIXED_A:
 		def_ant = 1;
-		tx_ant = 0;
+		tx_ant = 1;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
@@ -1882,7 +1882,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 		break;
 	case AR5K_ANTMODE_FIXED_B:
 		def_ant = 2;
-		tx_ant = 0;
+		tx_ant = 2;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
-- 
cgit v1.2.3


From a3b980fd1391e75068ae25f3817728b27bfdb04c Mon Sep 17 00:00:00 2001
From: Bruno Randolf <br1@einfach.org>
Date: Tue, 9 Mar 2010 16:55:33 +0900
Subject: ath5k: fix TSF reset

to reset the TSF, AR5K_BEACON_RESET_TSF has to be 1, not 0. also we have a
function for that so use it.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/reset.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index a35a7db0fc4c..c780b55020d2 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1379,11 +1379,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		ath5k_hw_set_sleep_clock(ah, true);
 
 	/*
-	 * Disable beacons and reset the register
+	 * Disable beacons and reset the TSF
 	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+	ath5k_hw_reset_tsf(ah);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 86415d43efd4f7093979cfa8a80232114266f1a4 Mon Sep 17 00:00:00 2001
From: Bruno Randolf <br1@einfach.org>
Date: Tue, 9 Mar 2010 16:56:05 +0900
Subject: ath5k: fix I/Q calibration (for real)

I/Q calibration was completely broken, resulting in a high number of CRC errors
on received packets. before i could see around 10% to 20% CRC errors, with this
patch they are between 0% and 3%.

1.) the removal of the mask in commit "ath5k: Fix I/Q calibration
(f1cf2dbd0f798b71b1590e7aca6647f2caef1649)" resulted in no mask beeing used
when writing the I/Q values into the register. additional errors in the
calculation of the values (see 2.) resulted too high numbers, exceeding the
masks, so wrong values like 0xfffffffe were written. to be safe we should
always use the bitmask when writing parts of a register.

2.) using a (s32) cast for q_coff is a wrong conversion to signed, since we
convert to a signed value later by substracting 128. this resulted in too low
numbers for Q many times, which were limited to -16 by the boundary check later
on.

3.) checked everything against the HAL sources and took over comments and minor
optimizations from there.

4.) we can't use ENABLE_BITS when we want to write a number (the number can
contain zeros). also always write the correction values first and set ENABLE
bit last, like the HAL does.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Cc: stable@kernel.org
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/phy.c | 37 ++++++++++++++++++------------------
 drivers/net/wireless/ath/ath5k/reg.h |  1 +
 2 files changed, 20 insertions(+), 18 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index ffe253ab9be7..eff3323efb4b 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1386,38 +1386,39 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
 		goto done;
 
 	/* Calibration has finished, get the results and re-run */
+
+	/* work around empty results which can apparently happen on 5212 */
 	for (i = 0; i <= 10; i++) {
 		iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
 		i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
 		q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr);
+		if (i_pwr && q_pwr)
+			break;
 	}
 
 	i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
 	q_coffd = q_pwr >> 7;
 
-	/* No correction */
-	if (i_coffd == 0 || q_coffd == 0)
+	/* protect against divide by 0 and loss of sign bits */
+	if (i_coffd == 0 || q_coffd < 2)
 		goto done;
 
-	i_coff = ((-iq_corr) / i_coffd);
+	i_coff = (-iq_corr) / i_coffd;
+	i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */
 
-	/* Boundary check */
-	if (i_coff > 31)
-		i_coff = 31;
-	if (i_coff < -32)
-		i_coff = -32;
+	q_coff = (i_pwr / q_coffd) - 128;
+	q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */
 
-	q_coff = (((s32)i_pwr / q_coffd) - 128);
+	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"new I:%d Q:%d (i_coffd:%x q_coffd:%x)",
+			i_coff, q_coff, i_coffd, q_coffd);
 
-	/* Boundary check */
-	if (q_coff > 15)
-		q_coff = 15;
-	if (q_coff < -16)
-		q_coff = -16;
-
-	/* Commit new I/Q value */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
-		((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
+	/* Commit new I/Q values (set enable bit last to match HAL sources) */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, i_coff);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, q_coff);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
 
 	/* Re-enable calibration -if we don't we'll commit
 	 * the same values again and again */
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 4cb9c5df9f46..1464f89b249c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -2187,6 +2187,7 @@
  */
 #define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
+#define	AR5K_PHY_IQ_CORR_Q_Q_COFF_S	0
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
-- 
cgit v1.2.3


From 5f13bfac0718ce6f83ecba3755f224c3790e8d66 Mon Sep 17 00:00:00 2001
From: Bruno Randolf <br1@einfach.org>
Date: Tue, 9 Mar 2010 16:56:10 +0900
Subject: ath5k: read eeprom IQ calibration values correctly for G mode

we read the IQ correction values (i_cal and q_cal) for G mode from a wrong
location (the same shifts as for A mode is applied which is incorrect). use
correct locations, matching the docs and HAL sources.

also we should write IQ correction only when we have that information in the
EEPROM, starting from version 4. also write it in the same way as we do in the
periodic recalibration (enable last), just to be sure.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/eeprom.c |  4 ++--
 drivers/net/wireless/ath/ath5k/reset.c  | 15 +++++++++------
 2 files changed, 11 insertions(+), 8 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 6a3f4da7fb48..10b52262b232 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -429,8 +429,8 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
 			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
 
 		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+		ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+		ee->ee_q_cal[mode] = val & 0x1f;
 
 		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
 			AR5K_EEPROM_READ(o++, val);
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index c780b55020d2..cbf28e379843 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -851,12 +851,15 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
 				AR5K_INIT_CYCRSSI_THR1);
 
-	/* I/Q correction
-	 * TODO: Per channel i/q infos ? */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		AR5K_PHY_IQ_CORR_ENABLE |
-		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		ee->ee_q_cal[ee_mode]);
+	/* I/Q correction (set enable bit last to match HAL sources) */
+	/* TODO: Per channel i/q infos ? */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
+			    ee->ee_i_cal[ee_mode]);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
+			    ee->ee_q_cal[ee_mode]);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+	}
 
 	/* Heavy clipping -disable for now */
 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
-- 
cgit v1.2.3


From 41093167ec6c1854903a4bc38a37b5740c028984 Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Tue, 9 Mar 2010 16:05:31 +0800
Subject: ipw2200: use kmalloc for large local variables
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixed below compiler warning:

drivers/net/wireless/ipw2x00/ipw2200.c: In function ‘ipw_load_firmware’:
drivers/net/wireless/ipw2x00/ipw2200.c:3260: warning: the frame size of
1168 bytes is larger than 1024 bytes

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ipw2x00/ipw2200.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 63c2a7ade5fb..5c7aa1b1eb56 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -3177,14 +3177,27 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 	int total_nr = 0;
 	int i;
 	struct pci_pool *pool;
-	u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
-	dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
+	void **virts;
+	dma_addr_t *phys;
 
 	IPW_DEBUG_TRACE("<< : \n");
 
+	virts = kmalloc(sizeof(void *) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!virts)
+		return -ENOMEM;
+
+	phys = kmalloc(sizeof(dma_addr_t) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!phys) {
+		kfree(virts);
+		return -ENOMEM;
+	}
 	pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
 	if (!pool) {
 		IPW_ERROR("pci_pool_create failed\n");
+		kfree(phys);
+		kfree(virts);
 		return -ENOMEM;
 	}
 
@@ -3254,6 +3267,8 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 		pci_pool_free(pool, virts[i], phys[i]);
 
 	pci_pool_destroy(pool);
+	kfree(phys);
+	kfree(virts);
 
 	return ret;
 }
-- 
cgit v1.2.3


From 3f07d1295191cfa41125e4e61ee2064790070071 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 13 Mar 2010 12:22:16 -0800
Subject: drivers/net/tg3.c: change the field used with the
 TG3_FLAG_10_100_ONLY constant

The constant TG3_FLAG_10_100_ONLY should be used with the tg3_flags field,
not the tg3_flags2 field, as done elsewhere in the same file.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c3b4fe74cd6b..22cf1c446de3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9776,7 +9776,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			   ADVERTISED_Pause |
 			   ADVERTISED_Asym_Pause;
 
-		if (!(tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+		if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
 			mask |= ADVERTISED_1000baseT_Half |
 				ADVERTISED_1000baseT_Full;
 
-- 
cgit v1.2.3


From 2a40018984c5c9647df1c18489449a3a227d9136 Mon Sep 17 00:00:00 2001
From: Mike McCormack <mikem@ring3k.org>
Date: Sat, 13 Mar 2010 12:24:18 -0800
Subject: sky2: Avoid rtnl_unlock without rtnl_lock

Make sure we always call rtnl_lock before going down the
error path in sky2_resume, which unlocks the rtnl lock.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 653bdd76ef46..d8ec4c11fd49 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4863,6 +4863,7 @@ static int sky2_resume(struct pci_dev *pdev)
 	if (!hw)
 		return 0;
 
+	rtnl_lock();
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
 		goto out;
@@ -4884,7 +4885,6 @@ static int sky2_resume(struct pci_dev *pdev)
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 	napi_enable(&hw->napi);
 
-	rtnl_lock();
 	for (i = 0; i < hw->ports; i++) {
 		err = sky2_reattach(hw->dev[i]);
 		if (err)
-- 
cgit v1.2.3


From c251c7f738cd94eb3a1febda318078c661eccb4d Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 13 Mar 2010 12:26:15 -0800
Subject: drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages

On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-)  It's one of the following
> commits:

Thanks Mikael.

Anonymity has some good attributes.
Blame avoidance is one of them.

I've broad shoulders.  It's me, then Dwight Howard...

There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.

tulip_core has:

	if (tp->flags & HAS_MEDIA_TABLE) {
		sprintf(dev->name, DRV_NAME "%d", board_idx);	/* hack */
		tulip_parse_eeprom(dev);
		strcpy(dev->name, "eth%d");			/* un-hack */
	}

So I don't feel _too_ bad.

tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tulip/eeprom.c | 54 +++++++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 24 deletions(-)

(limited to 'drivers/net')

diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e8309f81..49f05d1431f5 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)
 {
+	/*
+	  dev is not registered at this point, so logging messages can't
+	  use dev_<level> or netdev_<level> but dev->name is good via a
+	  hack in the caller
+	*/
+
 	/* The last media info list parsed, for multiport boards.  */
 	static struct mediatable *last_mediatable;
 	static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 		if (ee_data[0] == 0xff) {
 			if (last_mediatable) {
 				controller_index++;
-				dev_info(&dev->dev,
-					 "Controller %d of multiport board\n",
-					 controller_index);
+				pr_info("%s: Controller %d of multiport board\n",
+					dev->name, controller_index);
 				tp->mtable = last_mediatable;
 				ee_data = last_ee_data;
 				goto subsequent_board;
 			} else
-				dev_info(&dev->dev,
-					 "Missing EEPROM, this interface may not work correctly!\n");
+				pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+					dev->name);
 			return;
 		}
 	  /* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
 		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
 				 sizeof(eeprom_fixups[i].newtable));
-		  dev_info(&dev->dev,
-			   "Old format EEPROM on '%s' board.  Using substitute media control info\n",
-			   eeprom_fixups[i].name);
+		  pr_info("%s: Old format EEPROM on '%s' board.  Using substitute media control info\n",
+			  dev->name, eeprom_fixups[i].name);
 		  break;
 		}
 	  }
 	  if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-		  dev_info(&dev->dev,
-			   "Old style EEPROM with no media selection information\n");
+		  pr_info("%s: Old style EEPROM with no media selection information\n",
+			  dev->name);
 		return;
 	  }
 	}
@@ -217,8 +221,8 @@ subsequent_board:
 	        /* there is no phy information, don't even try to build mtable */
 	        if (count == 0) {
 			if (tulip_debug > 0)
-				dev_warn(&dev->dev,
-					 "no phy info, aborting mtable build\n");
+				pr_warning("%s: no phy info, aborting mtable build\n",
+					   dev->name);
 		        return;
 		}
 
@@ -234,8 +238,10 @@ subsequent_board:
 		mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
 		mtable->csr15dir = mtable->csr15val = 0;
 
-		dev_info(&dev->dev, "EEPROM default media type %s\n",
-			 media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+		pr_info("%s: EEPROM default media type %s\n",
+			dev->name,
+			media & 0x0800 ? "Autosense"
+				       : medianame[media & MEDIA_MASK]);
 		for (i = 0; i < count; i++) {
 			struct medialeaf *leaf = &mtable->mleaf[i];
 
@@ -298,17 +304,17 @@ subsequent_board:
 			}
 			if (tulip_debug > 1  &&  leaf->media == 11) {
 				unsigned char *bp = leaf->leafdata;
-				dev_info(&dev->dev,
-					 "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
-					 bp[0], bp[1], bp[2 + bp[1]*2],
-					 bp[5 + bp[2 + bp[1]*2]*2],
-					 bp[4 + bp[2 + bp[1]*2]*2]);
+				pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+					dev->name,
+					bp[0], bp[1], bp[2 + bp[1]*2],
+					bp[5 + bp[2 + bp[1]*2]*2],
+					bp[4 + bp[2 + bp[1]*2]*2]);
 			}
-			dev_info(&dev->dev,
-				 "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
-				 i, medianame[leaf->media & 15], leaf->media,
-				 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
-				 leaf->type);
+			pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+				dev->name,
+				i, medianame[leaf->media & 15], leaf->media,
+				leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+				leaf->type);
 		}
 		if (new_advertise)
 			tp->sym_advertise = new_advertise;
-- 
cgit v1.2.3